diff options
| -rw-r--r-- | arch/sh/boards/superh/microdev/io.c | 192 | ||||
| -rw-r--r-- | arch/sh/boards/superh/microdev/irq.c | 2 | ||||
| -rw-r--r-- | arch/sh/boards/superh/microdev/setup.c | 166 | ||||
| -rw-r--r-- | arch/sh/configs/microdev_defconfig | 410 | ||||
| -rw-r--r-- | include/asm-sh/microdev.h (renamed from include/asm-sh/microdev/irq.h) | 60 | ||||
| -rw-r--r-- | include/asm-sh/microdev/io.h | 53 |
6 files changed, 536 insertions, 347 deletions
diff --git a/arch/sh/boards/superh/microdev/io.c b/arch/sh/boards/superh/microdev/io.c index fe83b2c0307..1ed7f880b8c 100644 --- a/arch/sh/boards/superh/microdev/io.c +++ b/arch/sh/boards/superh/microdev/io.c @@ -16,7 +16,7 @@ #include <linux/pci.h> #include <linux/wait.h> #include <asm/io.h> -#include <asm/mach/io.h> +#include <asm/microdev.h> /* * we need to have a 'safe' address to re-direct all I/O requests @@ -52,8 +52,90 @@ #define IO_ISP1161_PHYS 0xa7700000ul /* Physical address of Philips ISP1161x USB chip */ #define IO_SUPERIO_PHYS 0xa7800000ul /* Physical address of SMSC FDC37C93xAPM SuperIO chip */ -#define PORT2ADDR(x) (microdev_isa_port2addr(x)) +/* + * map I/O ports to memory-mapped addresses + */ +static unsigned long microdev_isa_port2addr(unsigned long offset) +{ + unsigned long result; + + if ((offset >= IO_LAN91C111_BASE) && + (offset < IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) { + /* + * SMSC LAN91C111 Ethernet chip + */ + result = IO_LAN91C111_PHYS + offset - IO_LAN91C111_BASE; + } else if ((offset >= IO_SUPERIO_BASE) && + (offset < IO_SUPERIO_BASE + IO_SUPERIO_EXTENT)) { + /* + * SMSC FDC37C93xAPM SuperIO chip + * + * Configuration Registers + */ + result = IO_SUPERIO_PHYS + (offset << 1); +#if 0 + } else if (offset == KBD_DATA_REG || offset == KBD_CNTL_REG || + offset == KBD_STATUS_REG) { + /* + * SMSC FDC37C93xAPM SuperIO chip + * + * PS/2 Keyboard + Mouse (ports 0x60 and 0x64). + */ + result = IO_SUPERIO_PHYS + (offset << 1); +#endif + } else if (((offset >= IO_IDE1_BASE) && + (offset < IO_IDE1_BASE + IO_IDE_EXTENT)) || + (offset == IO_IDE1_MISC)) { + /* + * SMSC FDC37C93xAPM SuperIO chip + * + * IDE #1 + */ + result = IO_SUPERIO_PHYS + (offset << 1); + } else if (((offset >= IO_IDE2_BASE) && + (offset < IO_IDE2_BASE + IO_IDE_EXTENT)) || + (offset == IO_IDE2_MISC)) { + /* + * SMSC FDC37C93xAPM SuperIO chip + * + * IDE #2 + */ + result = IO_SUPERIO_PHYS + (offset << 1); + } else if ((offset >= IO_SERIAL1_BASE) && + (offset < IO_SERIAL1_BASE + IO_SERIAL_EXTENT)) { + /* + * SMSC FDC37C93xAPM SuperIO chip + * + * Serial #1 + */ + result = IO_SUPERIO_PHYS + (offset << 1); + } else if ((offset >= IO_SERIAL2_BASE) && + (offset < IO_SERIAL2_BASE + IO_SERIAL_EXTENT)) { + /* + * SMSC FDC37C93xAPM SuperIO chip + * + * Serial #2 + */ + result = IO_SUPERIO_PHYS + (offset << 1); + } else if ((offset >= IO_ISP1161_BASE) && + (offset < IO_ISP1161_BASE + IO_ISP1161_EXTENT)) { + /* + * Philips USB ISP1161x chip + */ + result = IO_ISP1161_PHYS + offset - IO_ISP1161_BASE; + } else { + /* + * safe default. + */ + printk("Warning: unexpected port in %s( offset = 0x%lx )\n", + __FUNCTION__, offset); + result = PVR; + } + + return result; +} +#define PORT2ADDR(x) (microdev_isa_port2addr(x)) static inline void delay(void) { @@ -94,6 +176,17 @@ unsigned int microdev_inl(unsigned long port) return *(volatile unsigned int*)PORT2ADDR(port); } +void microdev_outw(unsigned short b, unsigned long port) +{ +#ifdef CONFIG_PCI + if (port >= PCIBIOS_MIN_IO) { + microdev_pci_outw(b, port); + return; + } +#endif + *(volatile unsigned short*)PORT2ADDR(port) = b; +} + void microdev_outb(unsigned char b, unsigned long port) { #ifdef CONFIG_PCI @@ -158,17 +251,6 @@ void microdev_outb(unsigned char b, unsigned long port) } } -void microdev_outw(unsigned short b, unsigned long port) -{ -#ifdef CONFIG_PCI - if (port >= PCIBIOS_MIN_IO) { - microdev_pci_outw(b, port); - return; - } -#endif - *(volatile unsigned short*)PORT2ADDR(port) = b; -} - void microdev_outl(unsigned int b, unsigned long port) { #ifdef CONFIG_PCI @@ -284,87 +366,3 @@ void microdev_outsl(unsigned long port, const void *buffer, unsigned long count) while (count--) *port_addr = *buf++; } - -/* - * map I/O ports to memory-mapped addresses - */ -unsigned long microdev_isa_port2addr(unsigned long offset) -{ - unsigned long result; - - if ((offset >= IO_LAN91C111_BASE) && - (offset < IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) { - /* - * SMSC LAN91C111 Ethernet chip - */ - result = IO_LAN91C111_PHYS + offset - IO_LAN91C111_BASE; - } else if ((offset >= IO_SUPERIO_BASE) && - (offset < IO_SUPERIO_BASE + IO_SUPERIO_EXTENT)) { - /* - * SMSC FDC37C93xAPM SuperIO chip - * - * Configuration Registers - */ - result = IO_SUPERIO_PHYS + (offset << 1); -#if 0 - } else if (offset == KBD_DATA_REG || offset == KBD_CNTL_REG || - offset == KBD_STATUS_REG) { - /* - * SMSC FDC37C93xAPM SuperIO chip - * - * PS/2 Keyboard + Mouse (ports 0x60 and 0x64). - */ - result = IO_SUPERIO_PHYS + (offset << 1); -#endif - } else if (((offset >= IO_IDE1_BASE) && - (offset < IO_IDE1_BASE + IO_IDE_EXTENT)) || - (offset == IO_IDE1_MISC)) { - /* - * SMSC FDC37C93xAPM SuperIO chip - * - * IDE #1 - */ - result = IO_SUPERIO_PHYS + (offset << 1); - } else if (((offset >= IO_IDE2_BASE) && - (offset < IO_IDE2_BASE + IO_IDE_EXTENT)) || - (offset == IO_IDE2_MISC)) { - /* - * SMSC FDC37C93xAPM SuperIO chip - * - * IDE #2 - */ - result = IO_SUPERIO_PHYS + (offset << 1); - } else if ((offset >= IO_SERIAL1_BASE) && - (offset < IO_SERIAL1_BASE + IO_SERIAL_EXTENT)) { - /* - * SMSC FDC37C93xAPM SuperIO chip - * - * Serial #1 - */ - result = IO_SUPERIO_PHYS + (offset << 1); - } else if ((offset >= IO_SERIAL2_BASE) && - (offset < IO_SERIAL2_BASE + IO_SERIAL_EXTENT)) { - /* - * SMSC FDC37C93xAPM SuperIO chip - * - * Serial #2 - */ - result = IO_SUPERIO_PHYS + (offset << 1); - } else if ((offset >= IO_ISP1161_BASE) && - (offset < IO_ISP1161_BASE + IO_ISP1161_EXTENT)) { - /* - * Philips USB ISP1161x chip - */ - result = IO_ISP1161_PHYS + offset - IO_ISP1161_BASE; - } else { - /* - * safe default. - */ - printk("Warning: unexpected port in %s( offset = 0x%lx )\n", - __FUNCTION__, offset); - result = PVR; - } - - return result; -} - diff --git a/arch/sh/boards/superh/microdev/irq.c b/arch/sh/boards/superh/microdev/irq.c index 1395c1e65da..efcbd86b7cd 100644 --- a/arch/sh/boards/superh/microdev/irq.c +++ b/arch/sh/boards/superh/microdev/irq.c @@ -15,7 +15,7 @@ #include <asm/system.h> #include <asm/io.h> -#include <asm/mach/irq.h> +#include <asm/microdev.h> #define NUM_EXTERNAL_IRQS 16 /* IRL0 .. IRL15 */ diff --git a/arch/sh/boards/superh/microdev/setup.c b/arch/sh/boards/superh/microdev/setup.c index 1c1d65fb12d..892b14d3140 100644 --- a/arch/sh/boards/superh/microdev/setup.c +++ b/arch/sh/boards/superh/microdev/setup.c @@ -3,7 +3,7 @@ * * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com) * Copyright (C) 2003, 2004 SuperH, Inc. - * Copyright (C) 2004 Paul Mundt + * Copyright (C) 2004, 2005 Paul Mundt * * SuperH SH4-202 MicroDev board support. * @@ -15,11 +15,10 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/ioport.h> +#include <video/s1d13xxxfb.h> +#include <asm/microdev.h> #include <asm/io.h> -#include <asm/mach/irq.h> -#include <asm/mach/io.h> #include <asm/machvec.h> -#include <asm/machvec_init.h> extern void microdev_heartbeat(void); @@ -51,8 +50,6 @@ struct sh_machine_vector mv_sh4202_microdev __initmv = { .mv_outsw = microdev_outsw, .mv_outsl = microdev_outsl, - .mv_isa_port2addr = microdev_isa_port2addr, - .mv_init_irq = init_microdev_irq, #ifdef CONFIG_HEARTBEAT @@ -142,16 +139,161 @@ static struct platform_device smc91x_device = { .resource = smc91x_resources, }; -static int __init smc91x_setup(void) +#ifdef CONFIG_FB_S1D13XXX +static struct s1d13xxxfb_regval s1d13806_initregs[] = { + { S1DREG_MISC, 0x00 }, + { S1DREG_COM_DISP_MODE, 0x00 }, + { S1DREG_GPIO_CNF0, 0x00 }, + { S1DREG_GPIO_CNF1, 0x00 }, + { S1DREG_GPIO_CTL0, 0x00 }, + { S1DREG_GPIO_CTL1, 0x00 }, + { S1DREG_CLK_CNF, 0x02 }, + { S1DREG_LCD_CLK_CNF, 0x01 }, + { S1DREG_CRT_CLK_CNF, 0x03 }, + { S1DREG_MPLUG_CLK_CNF, 0x03 }, + { S1DREG_CPU2MEM_WST_SEL, 0x02 }, + { S1DREG_SDRAM_REF_RATE, 0x03 }, + { S1DREG_SDRAM_TC0, 0x00 }, + { S1DREG_SDRAM_TC1, 0x01 }, + { S1DREG_MEM_CNF, 0x80 }, + { S1DREG_PANEL_TYPE, 0x25 }, + { S1DREG_MOD_RATE, 0x00 }, + { S1DREG_LCD_DISP_HWIDTH, 0x63 }, + { S1DREG_LCD_NDISP_HPER, 0x1e }, + { S1DREG_TFT_FPLINE_START, 0x06 }, + { S1DREG_TFT_FPLINE_PWIDTH, 0x03 }, + { S1DREG_LCD_DISP_VHEIGHT0, 0x57 }, + { S1DREG_LCD_DISP_VHEIGHT1, 0x02 }, + { S1DREG_LCD_NDISP_VPER, 0x00 }, + { S1DREG_TFT_FPFRAME_START, 0x0a }, + { S1DREG_TFT_FPFRAME_PWIDTH, 0x81 }, + { S1DREG_LCD_DISP_MODE, 0x03 }, + { S1DREG_LCD_MISC, 0x00 }, + { S1DREG_LCD_DISP_START0, 0x00 }, + { S1DREG_LCD_DISP_START1, 0x00 }, + { S1DREG_LCD_DISP_START2, 0x00 }, + { S1DREG_LCD_MEM_OFF0, 0x90 }, + { S1DREG_LCD_MEM_OFF1, 0x01 }, + { S1DREG_LCD_PIX_PAN, 0x00 }, + { S1DREG_LCD_DISP_FIFO_HTC, 0x00 }, + { S1DREG_LCD_DISP_FIFO_LTC, 0x00 }, + { S1DREG_CRT_DISP_HWIDTH, 0x63 }, + { S1DREG_CRT_NDISP_HPER, 0x1f }, + { S1DREG_CRT_HRTC_START, 0x04 }, + { S1DREG_CRT_HRTC_PWIDTH, 0x8f }, + { S1DREG_CRT_DISP_VHEIGHT0, 0x57 }, + { S1DREG_CRT_DISP_VHEIGHT1, 0x02 }, + { S1DREG_CRT_NDISP_VPER, 0x1b }, + { S1DREG_CRT_VRTC_START, 0x00 }, + { S1DREG_CRT_VRTC_PWIDTH, 0x83 }, + { S1DREG_TV_OUT_CTL, 0x10 }, + { S1DREG_CRT_DISP_MODE, 0x05 }, + { S1DREG_CRT_DISP_START0, 0x00 }, + { S1DREG_CRT_DISP_START1, 0x00 }, + { S1DREG_CRT_DISP_START2, 0x00 }, + { S1DREG_CRT_MEM_OFF0, 0x20 }, + { S1DREG_CRT_MEM_OFF1, 0x03 }, + { S1DREG_CRT_PIX_PAN, 0x00 }, + { S1DREG_CRT_DISP_FIFO_HTC, 0x00 }, + { S1DREG_CRT_DISP_FIFO_LTC, 0x00 }, + { S1DREG_LCD_CUR_CTL, 0x00 }, + { S1DREG_LCD_CUR_START, 0x01 }, + { S1DREG_LCD_CUR_XPOS0, 0x00 }, + { S1DREG_LCD_CUR_XPOS1, 0x00 }, + { S1DREG_LCD_CUR_YPOS0, 0x00 }, + { S1DREG_LCD_CUR_YPOS1, 0x00 }, + { S1DREG_LCD_CUR_BCTL0, 0x00 }, + { S1DREG_LCD_CUR_GCTL0, 0x00 }, + { S1DREG_LCD_CUR_RCTL0, 0x00 }, + { S1DREG_LCD_CUR_BCTL1, 0x1f }, + { S1DREG_LCD_CUR_GCTL1, 0x3f }, + { S1DREG_LCD_CUR_RCTL1, 0x1f }, + { S1DREG_LCD_CUR_FIFO_HTC, 0x00 }, + { S1DREG_CRT_CUR_CTL, 0x00 }, + { S1DREG_CRT_CUR_START, 0x01 }, + { S1DREG_CRT_CUR_XPOS0, 0x00 }, + { S1DREG_CRT_CUR_XPOS1, 0x00 }, + { S1DREG_CRT_CUR_YPOS0, 0x00 }, + { S1DREG_CRT_CUR_YPOS1, 0x00 }, + { S1DREG_CRT_CUR_BCTL0, 0x00 }, + { S1DREG_CRT_CUR_GCTL0, 0x00 }, + { S1DREG_CRT_CUR_RCTL0, 0x00 }, + { S1DREG_CRT_CUR_BCTL1, 0x1f }, + { S1DREG_CRT_CUR_GCTL1, 0x3f }, + { S1DREG_CRT_CUR_RCTL1, 0x1f }, + { S1DREG_CRT_CUR_FIFO_HTC, 0x00 }, + { S1DREG_BBLT_CTL0, 0x00 }, + { S1DREG_BBLT_CTL1, 0x00 }, + { S1DREG_BBLT_CC_EXP, 0x00 }, + { S1DREG_BBLT_OP, 0x00 }, + { S1DREG_BBLT_SRC_START0, 0x00 }, + { S1DREG_BBLT_SRC_START1, 0x00 }, + { S1DREG_BBLT_SRC_START2, 0x00 }, + { S1DREG_BBLT_DST_START0, 0x00 }, + { S1DREG_BBLT_DST_START1, 0x00 }, + { S1DREG_BBLT_DST_START2, 0x00 }, + { S1DREG_BBLT_MEM_OFF0, 0x00 }, + { S1DREG_BBLT_MEM_OFF1, 0x00 }, + { S1DREG_BBLT_WIDTH0, 0x00 }, + { S1DREG_BBLT_WIDTH1, 0x00 }, + { S1DREG_BBLT_HEIGHT0, 0x00 }, + { S1DREG_BBLT_HEIGHT1, 0x00 }, + { S1DREG_BBLT_BGC0, 0x00 }, + { S1DREG_BBLT_BGC1, 0x00 }, + { S1DREG_BBLT_FGC0, 0x00 }, + { S1DREG_BBLT_FGC1, 0x00 }, + { S1DREG_LKUP_MODE, 0x00 }, + { S1DREG_LKUP_ADDR, 0x00 }, + { S1DREG_PS_CNF, 0x10 }, + { S1DREG_PS_STATUS, 0x00 }, + { S1DREG_CPU2MEM_WDOGT, 0x00 }, + { S1DREG_COM_DISP_MODE, 0x02 }, +}; + +static struct s1d13xxxfb_pdata s1d13806_platform_data = { + .initregs = s1d13806_initregs, + .initregssize = ARRAY_SIZE(s1d13806_initregs), +}; + +static struct resource s1d13806_resources[] = { + [0] = { + .start = 0x07200000, + .end = 0x07200000 + 0x00200000 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 0x07000000, + .end = 0x07000000 + 0x00200000 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device s1d13806_device = { + .name = "s1d13806fb", + .id = -1, + .num_resources = ARRAY_SIZE(s1d13806_resources), + .resource = s1d13806_resources, + + .dev = { + .platform_data = &s1d13806_platform_data, + }, +}; +#endif + +static struct platform_device *microdev_devices[] __initdata = { + &smc91x_device, +#ifdef CONFIG_FB_S1D13XXX + &s1d13806_device, +#endif +}; + +static int __init microdev_devices_setup(void) { - return platform_device_register(&smc91x_device); + return platform_add_devices(microdev_devices, ARRAY_SIZE(microdev_devices)); } -__initcall(smc91x_setup); +__initcall(microdev_devices_setup); - /* - * Initialize the board - */ void __init platform_setup(void) { int * const fpgaRevisionRegister = (int*)(MICRODEV_FPGA_GP_BASE + 0x8ul); diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig index a3bd280b53d..ab3db76d1e5 100644 --- a/arch/sh/configs/microdev_defconfig +++ b/arch/sh/configs/microdev_defconfig @@ -1,10 +1,9 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-sh -# Wed Mar 2 15:09:41 2005 +# Linux kernel version: 2.6.16-rc1 +# Fri Jan 27 19:43:20 2006 # CONFIG_SUPERH=y -CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -17,11 +16,13 @@ CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y # CONFIG_SYSVIPC is not set # CONFIG_POSIX_MQUEUE is not set @@ -29,22 +30,29 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_UID16=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -52,6 +60,24 @@ CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_MODULES is not set # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # System type # # CONFIG_SH_SOLUTION_ENGINE is not set @@ -61,9 +87,7 @@ CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_SH_7751_SYSTEMH is not set # CONFIG_SH_STB1_HARP is not set # CONFIG_SH_STB1_OVERDRIVE is not set -# CONFIG_SH_HP620 is not set -# CONFIG_SH_HP680 is not set -# CONFIG_SH_HP690 is not set +# CONFIG_SH_HP6XX is not set # CONFIG_SH_CQREEK is not set # CONFIG_SH_DMIDA is not set # CONFIG_SH_EC3104 is not set @@ -78,45 +102,94 @@ CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_SH_SECUREEDGE5410 is not set # CONFIG_SH_HS7751RVOIP is not set # CONFIG_SH_RTS7751R2D is not set +# CONFIG_SH_R7780RP is not set # CONFIG_SH_EDOSK7705 is not set CONFIG_SH_SH4202_MICRODEV=y +# CONFIG_SH_LANDISK is not set +# CONFIG_SH_TITAN is not set # CONFIG_SH_UNKNOWN is not set -# CONFIG_CPU_SH2 is not set -# CONFIG_CPU_SH3 is not set + +# +# Processor selection +# CONFIG_CPU_SH4=y + +# +# SH-2 Processor Support +# # CONFIG_CPU_SUBTYPE_SH7604 is not set + +# +# SH-3 Processor Support +# # CONFIG_CPU_SUBTYPE_SH7300 is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set # CONFIG_CPU_SUBTYPE_SH7708 is not set # CONFIG_CPU_SUBTYPE_SH7709 is not set + +# +# SH-4 Processor Support +# # CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set # CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set -# CONFIG_CPU_SUBTYPE_SH73180 is not set +CONFIG_CPU_SUBTYPE_SH4_202=y + +# +# ST40 Processor Support +# # CONFIG_CPU_SUBTYPE_ST40STB1 is not set # CONFIG_CPU_SUBTYPE_ST40GX1 is not set -CONFIG_CPU_SUBTYPE_SH4_202=y + +# +# SH-4A Processor Support +# +# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set + +# +# Memory management options +# CONFIG_MMU=y -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttySC0,115200" +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +# CONFIG_SH_WRITETHROUGH is not set +# CONFIG_SH_OCRAM is not set CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x04000000 -CONFIG_MEMORY_SET=y -# CONFIG_MEMORY_OVERRIDE is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SH_RTC=y CONFIG_SH_FPU=y -CONFIG_ZERO_PAGE_OFFSET=0x00001000 -CONFIG_BOOT_LINK_OFFSET=0x00800000 -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_PREEMPT=y -# CONFIG_UBC_WAKEUP is not set -# CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set # CONFIG_SH_STORE_QUEUES is not set -# CONFIG_SMP is not set -CONFIG_SH_PCLK_CALC=y -CONFIG_SH_PCLK_FREQ=65986048 +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_SR_RB=y + +# +# Timer support +# +CONFIG_SH_TMU=y +CONFIG_SH_PCLK_FREQ=66000000 # # CPU Frequency scaling @@ -137,20 +210,31 @@ CONFIG_NR_ONCHIP_DMA_CHANNELS=4 CONFIG_HEARTBEAT=y # -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# Kernel features # -CONFIG_ISA=y -# CONFIG_PCI is not set +# CONFIG_KEXEC is not set +CONFIG_PREEMPT=y +# CONFIG_SMP is not set # -# PCCARD (PCMCIA/CardBus) support +# Boot options # -# CONFIG_PCCARD is not set +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +# CONFIG_UBC_WAKEUP is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttySC0,115200" # -# PC-card bridges +# Bus options # -CONFIG_PCMCIA_PROBE=y +# CONFIG_SUPERHYWAY is not set +# CONFIG_PCI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set # # PCI Hotplug Support @@ -164,9 +248,79 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # -# SH initrd options +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_PACKET is not set +# CONFIG_UNIX is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) # -# CONFIG_EMBEDDED_RAMDISK is not set +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -180,6 +334,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set @@ -192,13 +351,10 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Plug and Play support # -# CONFIG_PNP is not set # # Block devices # -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_DEV_XD is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set @@ -206,17 +362,7 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -241,9 +387,7 @@ CONFIG_BLK_DEV_IDECD=y # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y -CONFIG_IDE_SH=y # CONFIG_IDE_ARM is not set -# CONFIG_IDE_CHIPSETS is not set # CONFIG_BLK_DEV_IDEDMA is not set # CONFIG_IDEDMA_AUTO is not set # CONFIG_BLK_DEV_HD is not set @@ -251,14 +395,10 @@ CONFIG_IDE_SH=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# # Multi-device support (RAID and LVM) # # CONFIG_MD is not set @@ -266,6 +406,7 @@ CONFIG_IDE_SH=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support @@ -276,69 +417,8 @@ CONFIG_IDE_SH=y # # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_PACKET is not set -# CONFIG_NETLINK_DEV is not set -# CONFIG_UNIX is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -346,9 +426,9 @@ CONFIG_NETDEVICES=y # CONFIG_TUN is not set # -# ARCnet devices +# PHY device support # -# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set # # Ethernet (10 or 100Mbit) @@ -356,17 +436,7 @@ CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_STNIC is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_LANCE is not set -# CONFIG_NET_VENDOR_SMC is not set CONFIG_SMC91X=y -# CONFIG_NET_VENDOR_RACAL is not set -# CONFIG_AT1700 is not set -# CONFIG_DEPCA is not set -# CONFIG_HP100 is not set -# CONFIG_NET_ISA is not set -# CONFIG_NET_PCI is not set -# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) @@ -379,7 +449,6 @@ CONFIG_SMC91X=y # # Token Ring devices # -# CONFIG_TR is not set # # Wireless LAN (non-hamradio) @@ -394,6 +463,8 @@ CONFIG_SMC91X=y # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -411,20 +482,10 @@ CONFIG_SMC91X=y # CONFIG_INPUT is not set # -# Userland interfaces -# - -# -# Input I/O drivers +# Hardware I/O ports # -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # CONFIG_SERIO is not set -# CONFIG_SERIO_I8042 is not set - -# -# Input Device Drivers -# +# CONFIG_GAMEPORT is not set # # Character devices @@ -464,24 +525,46 @@ CONFIG_RTC=y # # Ftape, the floppy tape device driver # -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# # I2C support # # CONFIG_I2C is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Dallas's 1-wire bus # # CONFIG_W1 is not set # +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# # Misc devices # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -508,7 +591,7 @@ CONFIG_RTC=y # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # @@ -524,13 +607,21 @@ CONFIG_RTC=y # # InfiniBand support # -# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# EDAC - error detection and reporting (RAS) +# # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set @@ -540,17 +631,17 @@ CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set - -# -# XFS support -# +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -574,16 +665,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -CONFIG_DEVFS_FS=y -CONFIG_DEVFS_MOUNT=y -# CONFIG_DEVFS_DEBUG is not set -CONFIG_DEVPTS_FS_XATTR=y -# CONFIG_DEVPTS_FS_SECURITY is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -607,12 +694,14 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y @@ -622,6 +711,7 @@ CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -681,8 +771,10 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_DEBUG_PREEMPT=y +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_FRAME_POINTER is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set @@ -706,6 +798,7 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set @@ -730,5 +823,6 @@ CONFIG_CRYPTO_DES=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set diff --git a/include/asm-sh/microdev/irq.h b/include/asm-sh/microdev.h index 47f6f77a65f..018332a9e59 100644 --- a/include/asm-sh/microdev/irq.h +++ b/include/asm-sh/microdev.h @@ -1,32 +1,27 @@ /* - * linux/include/asm-sh/irq_microdev.h + * linux/include/asm-sh/microdev.h * * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com) * - * IRQ functions for the SuperH SH4-202 MicroDev board. + * Definitions for the SuperH SH4-202 MicroDev board. * * May be copied or modified under the terms of the GNU General Public * License. See linux/COPYING for more information. - * */ - - -#ifndef _ASM_SH_IRQ_MICRODEV_H -#define _ASM_SH_IRQ_MICRODEV_H +#ifndef __ASM_SH_MICRODEV_H +#define __ASM_SH_MICRODEV_H extern void init_microdev_irq(void); extern void microdev_print_fpga_intc_status(void); - - /* - * The following are useful macros for manipulating the - * interrupt controller (INTC) on the CPU-board FPGA. - * It should be noted that there is an INTC on the FPGA, - * and a seperate INTC on the SH4-202 core - these are - * two different things, both of which need to be prorammed - * to correctly route - unfortunately, they have the - * same name and abbreviations! - */ +/* + * The following are useful macros for manipulating the interrupt + * controller (INTC) on the CPU-board FPGA. should be noted that there + * is an INTC on the FPGA, and a seperate INTC on the SH4-202 core - + * these are two different things, both of which need to be prorammed to + * correctly route - unfortunately, they have the same name and + * abbreviations! + */ #define MICRODEV_FPGA_INTC_BASE 0xa6110000ul /* INTC base address on CPU-board FPGA */ #define MICRODEV_FPGA_INTENB_REG (MICRODEV_FPGA_INTC_BASE+0ul) /* Interrupt Enable Register on INTC on CPU-board FPGA */ #define MICRODEV_FPGA_INTDSB_REG (MICRODEV_FPGA_INTC_BASE+8ul) /* Interrupt Disable Register on INTC on CPU-board FPGA */ @@ -38,10 +33,10 @@ extern void microdev_print_fpga_intc_status(void); #define MICRODEV_FPGA_INTREQ_REG (MICRODEV_FPGA_INTC_BASE+0x38ul) /* Interrupt Request Register on INTC on CPU-board FPGA */ - /* - * The following are the IRQ numbers for the Linux Kernel for external interrupts. - * i.e. the numbers seen by 'cat /proc/interrupt'. - */ +/* + * The following are the IRQ numbers for the Linux Kernel for external + * interrupts. i.e. the numbers seen by 'cat /proc/interrupt'. + */ #define MICRODEV_LINUX_IRQ_KEYBOARD 1 /* SuperIO Keyboard */ #define MICRODEV_LINUX_IRQ_SERIAL1 2 /* SuperIO Serial #1 */ #define MICRODEV_LINUX_IRQ_ETHERNET 3 /* on-board Ethnernet */ @@ -51,10 +46,11 @@ extern void microdev_print_fpga_intc_status(void); #define MICRODEV_LINUX_IRQ_IDE2 13 /* SuperIO IDE #2 */ #define MICRODEV_LINUX_IRQ_IDE1 14 /* SuperIO IDE #1 */ - /* - * The following are the IRQ numbers for the INTC on the FPGA for external interrupts. - * i.e. the bits in the INTC registers in the FPGA. - */ +/* + * The following are the IRQ numbers for the INTC on the FPGA for + * external interrupts. i.e. the bits in the INTC registers in the + * FPGA. + */ #define MICRODEV_FPGA_IRQ_KEYBOARD 1 /* SuperIO Keyboard */ #define MICRODEV_FPGA_IRQ_SERIAL1 3 /* SuperIO Serial #1 */ #define MICRODEV_FPGA_IRQ_SERIAL2 4 /* SuperIO Serial #2 */ @@ -69,4 +65,16 @@ extern void microdev_print_fpga_intc_status(void); #define MICRODEV_IRQ_PCI_INTC 10 #define MICRODEV_IRQ_PCI_INTD 11 -#endif /* _ASM_SH_IRQ_MICRODEV_H */ +#define __IO_PREFIX microdev +#include <asm/io_generic.h> + +#if defined(CONFIG_PCI) +unsigned char microdev_pci_inb(unsigned long port); +unsigned short microdev_pci_inw(unsigned long port); +unsigned long microdev_pci_inl(unsigned long port); +void microdev_pci_outb(unsigned char data, unsigned long port); +void microdev_pci_outw(unsigned short data, unsigned long port); +void microdev_pci_outl(unsigned long data, unsigned long port); +#endif + +#endif /* __ASM_SH_MICRODEV_H */ diff --git a/include/asm-sh/microdev/io.h b/include/asm-sh/microdev/io.h deleted file mode 100644 index f2ca4ac8c88..00000000000 --- a/include/asm-sh/microdev/io.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * linux/include/asm-sh/io_microdev.h - * - * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com) - * - * IO functions for the SuperH SH4-202 MicroDev board. - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - */ - - -#ifndef _ASM_SH_IO_MICRODEV_H -#define _ASM_SH_IO_MICRODEV_H - -extern unsigned long microdev_isa_port2addr(unsigned long offset); - -extern unsigned char microdev_inb(unsigned long port); -extern unsigned short microdev_inw(unsigned long port); -extern unsigned int microdev_inl(unsigned long port); - -extern void microdev_outb(unsigned char value, unsigned long port); -extern void microdev_outw(unsigned short value, unsigned long port); -extern void microdev_outl(unsigned int value, unsigned long port); - -extern unsigned char microdev_inb_p(unsigned long port); -extern unsigned short microdev_inw_p(unsigned long port); -extern unsigned int microdev_inl_p(unsigned long port); - -extern void microdev_outb_p(unsigned char value, unsigned long port); -extern void microdev_outw_p(unsigned short value, unsigned long port); -extern void microdev_outl_p(unsigned int value, unsigned long port); - -extern void microdev_insb(unsigned long port, void *addr, unsigned long count); -extern void microdev_insw(unsigned long port, void *addr, unsigned long count); -extern void microdev_insl(unsigned long port, void *addr, unsigned long count); - -extern void microdev_outsb(unsigned long port, const void *addr, unsigned long count); -extern void microdev_outsw(unsigned long port, const void *addr, unsigned long count); -extern void microdev_outsl(unsigned long port, const void *addr, unsigned long count); - -#if defined(CONFIG_PCI) -extern unsigned char microdev_pci_inb(unsigned long port); -extern unsigned short microdev_pci_inw(unsigned long port); -extern unsigned long microdev_pci_inl(unsigned long port); -extern void microdev_pci_outb(unsigned char data, unsigned long port); -extern void microdev_pci_outw(unsigned short data, unsigned long port); -extern void microdev_pci_outl(unsigned long data, unsigned long port); -#endif - -#endif /* _ASM_SH_IO_MICRODEV_H */ - |