diff options
| -rw-r--r-- | arch/powerpc/boot/dts/warp.dts | 27 | ||||
| -rw-r--r-- | arch/powerpc/platforms/44x/warp.c | 76 |
2 files changed, 48 insertions, 55 deletions
diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts index 7e183ff9a31..01bfb56bbe8 100644 --- a/arch/powerpc/boot/dts/warp.dts +++ b/arch/powerpc/boot/dts/warp.dts @@ -1,7 +1,7 @@ /* * Device Tree Source for PIKA Warp * - * Copyright (c) 2008 PIKA Technologies + * Copyright (c) 2008-2009 PIKA Technologies * Sean MacLennan <smaclennan@pikatech.com> * * This file is licensed under the terms of the GNU General Public @@ -158,7 +158,7 @@ partition@0 { label = "splash"; - reg = <0x00000000 0x00020000>; + reg = <0x00000000 0x00010000>; }; partition@300000 { label = "fpga"; @@ -244,28 +244,27 @@ }; GPIO0: gpio@ef600b00 { - compatible = "ibm,gpio-440ep"; + compatible = "ibm,ppc4xx-gpio"; reg = <0xef600b00 0x00000048>; #gpio-cells = <2>; gpio-controller; }; GPIO1: gpio@ef600c00 { - compatible = "ibm,gpio-440ep"; + compatible = "ibm,ppc4xx-gpio"; reg = <0xef600c00 0x00000048>; #gpio-cells = <2>; gpio-controller; + }; - led@31 { - compatible = "linux,gpio-led"; - linux,name = ":green:"; - gpios = <&GPIO1 31 0>; - }; - - led@30 { - compatible = "linux,gpio-led"; - linux,name = ":red:"; - gpios = <&GPIO1 30 0>; + power-leds { + compatible = "gpio-leds"; + green { + gpios = <&GPIO1 0 0>; + default-state = "on"; + }; + red { + gpios = <&GPIO1 1 0>; }; }; diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c index 960edf89be5..c5118802a28 100644 --- a/arch/powerpc/platforms/44x/warp.c +++ b/arch/powerpc/platforms/44x/warp.c @@ -1,7 +1,7 @@ /* * PIKA Warp(tm) board specific routines * - * Copyright (c) 2008 PIKA Technologies + * Copyright (c) 2008-2009 PIKA Technologies * Sean MacLennan <smaclennan@pikatech.com> * * This program is free software; you can redistribute it and/or modify it @@ -15,6 +15,7 @@ #include <linux/i2c.h> #include <linux/interrupt.h> #include <linux/delay.h> +#include <linux/of_gpio.h> #include <asm/machdep.h> #include <asm/prom.h> @@ -23,6 +24,7 @@ #include <asm/uic.h> #include <asm/ppc4xx.h> + static __initdata struct of_device_id warp_of_bus[] = { { .compatible = "ibm,plb4", }, { .compatible = "ibm,opb", }, @@ -55,6 +57,8 @@ define_machine(warp) { }; +static u32 post_info; + /* I am not sure this is the best place for this... */ static int __init warp_post_info(void) { @@ -77,21 +81,21 @@ static int __init warp_post_info(void) iounmap(fpga); - if (post1 || post2) + if (post1 || post2) { printk(KERN_INFO "Warp POST %08x %08x\n", post1, post2); - else + post_info = 1; + } else printk(KERN_INFO "Warp POST OK\n"); return 0; } -machine_late_initcall(warp, warp_post_info); #ifdef CONFIG_SENSORS_AD7414 static LIST_HEAD(dtm_shutdown_list); static void __iomem *dtm_fpga; -static void __iomem *gpio_base; +static unsigned green_led, red_led; struct dtm_shutdown { @@ -134,14 +138,17 @@ int pika_dtm_unregister_shutdown(void (*func)(void *arg), void *arg) static irqreturn_t temp_isr(int irq, void *context) { struct dtm_shutdown *shutdown; + int value = 1; local_irq_disable(); + gpio_set_value(green_led, 0); + /* Run through the shutdown list. */ list_for_each_entry(shutdown, &dtm_shutdown_list, list) shutdown->func(shutdown->arg); - printk(KERN_EMERG "\n\nCritical Temperature Shutdown\n"); + printk(KERN_EMERG "\n\nCritical Temperature Shutdown\n\n"); while (1) { if (dtm_fpga) { @@ -149,52 +156,34 @@ static irqreturn_t temp_isr(int irq, void *context) out_be32(dtm_fpga + 0x14, reset); } - if (gpio_base) { - unsigned leds = in_be32(gpio_base); - - /* green off, red toggle */ - leds &= ~0x80000000; - leds ^= 0x40000000; - - out_be32(gpio_base, leds); - } - + gpio_set_value(red_led, value); + value ^= 1; mdelay(500); } } static int pika_setup_leds(void) { - struct device_node *np; - const u32 *gpios; - int len; + struct device_node *np, *child; - np = of_find_compatible_node(NULL, NULL, "linux,gpio-led"); + np = of_find_compatible_node(NULL, NULL, "gpio-leds"); if (!np) { - printk(KERN_ERR __FILE__ ": Unable to find gpio-led\n"); - return -ENOENT; - } - - gpios = of_get_property(np, "gpios", &len); - of_node_put(np); - if (!gpios || len < 4) { - printk(KERN_ERR __FILE__ - ": Unable to get gpios property (%d)\n", len); + printk(KERN_ERR __FILE__ ": Unable to find leds\n"); return -ENOENT; } - np = of_find_node_by_phandle(gpios[0]); - if (!np) { - printk(KERN_ERR __FILE__ ": Unable to find gpio\n"); - return -ENOENT; - } + for_each_child_of_node(np, child) + if (strcmp(child->name, "green") == 0) { + green_led = of_get_gpio(child, 0); + /* Turn back on the green LED */ + gpio_set_value(green_led, 1); + } else if (strcmp(child->name, "red") == 0) { + red_led = of_get_gpio(child, 0); + /* Set based on post */ + gpio_set_value(red_led, post_info); + } - gpio_base = of_iomap(np, 0); of_node_put(np); - if (!gpio_base) { - printk(KERN_ERR __FILE__ ": Unable to map gpio"); - return -ENOMEM; - } return 0; } @@ -270,10 +259,10 @@ static int pika_dtm_thread(void __iomem *fpga) } found_it: - i2c_put_adapter(adap); - pika_setup_critical_temp(client); + i2c_put_adapter(adap); + printk(KERN_INFO "PIKA DTM thread running.\n"); while (!kthread_should_stop()) { @@ -311,6 +300,9 @@ static int __init pika_dtm_start(void) if (dtm_fpga == NULL) return -ENOENT; + /* Must get post info before thread starts. */ + warp_post_info(); + dtm_thread = kthread_run(pika_dtm_thread, dtm_fpga, "pika-dtm"); if (IS_ERR(dtm_thread)) { iounmap(dtm_fpga); @@ -333,6 +325,8 @@ int pika_dtm_unregister_shutdown(void (*func)(void *arg), void *arg) return 0; } +machine_late_initcall(warp, warp_post_info); + #endif EXPORT_SYMBOL(pika_dtm_register_shutdown); |