diff options
172 files changed, 223 insertions, 244 deletions
diff --git a/Documentation/Changes b/Documentation/Changes index eca9f6e6fbe..4fb88f15f2e 100644 --- a/Documentation/Changes +++ b/Documentation/Changes @@ -331,7 +331,7 @@ o <ftp://ftp.kernel.org/pub/linux/kernel/people/rusty/modules/> Mkinitrd -------- -o <ftp://rawhide.redhat.com/pub/rawhide/SRPMS/SRPMS/> +o <https://code.launchpad.net/initrd-tools/main> E2fsprogs --------- @@ -343,11 +343,11 @@ o <http://jfs.sourceforge.net/> Reiserfsprogs ------------- -o <http://www.namesys.com/pub/reiserfsprogs/reiserfsprogs-3.6.3.tar.gz> +o <http://www.kernel.org/pub/linux/utils/fs/reiserfs/> Xfsprogs -------- -o <ftp://oss.sgi.com/projects/xfs/download/> +o <ftp://oss.sgi.com/projects/xfs/> Pcmciautils ----------- @@ -387,18 +387,18 @@ o <http://sourceforge.net/projects/fuse> mcelog ------ -o <ftp://ftp.kernel.org/pub/linux/utils/cpu/mce/mcelog/> +o <ftp://ftp.kernel.org/pub/linux/utils/cpu/mce/> Networking ********** PPP --- -o <ftp://ftp.samba.org/pub/ppp/ppp-2.4.0.tar.gz> +o <ftp://ftp.samba.org/pub/ppp/> Isdn4k-utils ------------ -o <ftp://ftp.isdn4linux.de/pub/isdn4linux/utils/isdn4k-utils.v3.1pre1.tar.gz> +o <ftp://ftp.isdn4linux.de/pub/isdn4linux/utils/> NFS-utils --------- diff --git a/Documentation/PCI/pci.txt b/Documentation/PCI/pci.txt index 7f6de6ea5b4..6148d4080f8 100644 --- a/Documentation/PCI/pci.txt +++ b/Documentation/PCI/pci.txt @@ -581,7 +581,7 @@ to be handled by platform and generic code, not individual drivers. 8. Vendor and device identifications ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -One is not not required to add new device ids to include/linux/pci_ids.h. +One is not required to add new device ids to include/linux/pci_ids.h. Please add PCI_VENDOR_ID_xxx for vendors and a hex constant for device ids. PCI_VENDOR_ID_xxx constants are re-used. The device ids are arbitrary diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 1571c0c83db..40a9c323931 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -93,7 +93,7 @@ Why: Broken design for runtime control over driver power states, confusing inputs. This framework was never widely used, and most attempts to use it were broken. Drivers should instead be exposing domain-specific interfaces either to kernel or to userspace. -Who: Pavel Machek <pavel@suse.cz> +Who: Pavel Machek <pavel@ucw.cz> --------------------------- diff --git a/Documentation/hwmon/hpfall.c b/Documentation/hwmon/hpfall.c index 681ec22b9d0..a4a8fc5d05d 100644 --- a/Documentation/hwmon/hpfall.c +++ b/Documentation/hwmon/hpfall.c @@ -1,7 +1,7 @@ /* Disk protection for HP machines. * * Copyright 2008 Eric Piel - * Copyright 2009 Pavel Machek <pavel@suse.cz> + * Copyright 2009 Pavel Machek <pavel@ucw.cz> * * GPLv2. */ diff --git a/Documentation/power/tricks.txt b/Documentation/power/tricks.txt index 3b26bb502a4..a1b8f7249f4 100644 --- a/Documentation/power/tricks.txt +++ b/Documentation/power/tricks.txt @@ -1,6 +1,6 @@ swsusp/S3 tricks ~~~~~~~~~~~~~~~~ -Pavel Machek <pavel@suse.cz> +Pavel Machek <pavel@ucw.cz> If you want to trick swsusp/S3 into working, you might want to try: diff --git a/Documentation/rt-mutex-design.txt b/Documentation/rt-mutex-design.txt index 8df0b782c4d..33ed8007a84 100644 --- a/Documentation/rt-mutex-design.txt +++ b/Documentation/rt-mutex-design.txt @@ -364,7 +364,7 @@ process this is rather easy to know what needs to be adjusted. The functions implementing the task adjustments are rt_mutex_adjust_prio, __rt_mutex_adjust_prio (same as the former, but expects the task pi_lock -to already be taken), rt_mutex_get_prio, and rt_mutex_setprio. +to already be taken), rt_mutex_getprio, and rt_mutex_setprio. rt_mutex_getprio and rt_mutex_setprio are only used in __rt_mutex_adjust_prio. diff --git a/Documentation/scsi/ChangeLog.lpfc b/Documentation/scsi/ChangeLog.lpfc index e759e92e286..337c924cc81 100644 --- a/Documentation/scsi/ChangeLog.lpfc +++ b/Documentation/scsi/ChangeLog.lpfc @@ -807,7 +807,7 @@ Changes from 20040908 to 20040920 lpfc_disc_done/lpfc_do_dpc cleanup - lpfc_disc_done can return void - move lpfc_do_dpc and lpfc_disc_done to lpfc_hbadisc.c - remove checking of list emptiness before calling lpfc_disc_done, - it handles the emtpy list case just fine and the additional + it handles the empty list case just fine and the additional instructions cost less then the bustlocked spinlock operations. * Integrated patch from Christoph Hellwig: This adds a new 64bit counter instead, brd_no isn't reused anymore. Also some tiny diff --git a/Documentation/sparse.txt b/Documentation/sparse.txt index 9b659c79a54..4909d411635 100644 --- a/Documentation/sparse.txt +++ b/Documentation/sparse.txt @@ -1,5 +1,5 @@ Copyright 2004 Linus Torvalds -Copyright 2004 Pavel Machek <pavel@suse.cz> +Copyright 2004 Pavel Machek <pavel@ucw.cz> Copyright 2006 Bob Copeland <me@bobcopeland.com> Using sparse for typechecking diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt index 5fdbb612aeb..82b2da18c45 100644 --- a/Documentation/sysctl/vm.txt +++ b/Documentation/sysctl/vm.txt @@ -196,7 +196,7 @@ controlled by this knob are discussed in Documentation/laptops/laptop-mode.txt. legacy_va_layout -If non-zero, this sysctl disables the new 32-bit mmap mmap layout - the kernel +If non-zero, this sysctl disables the new 32-bit mmap layout - the kernel will use the legacy (2.4) layout for all processes. ============================================================== diff --git a/Documentation/zh_CN/sparse.txt b/Documentation/zh_CN/sparse.txt index 75992a603ae..cc144e58151 100644 --- a/Documentation/zh_CN/sparse.txt +++ b/Documentation/zh_CN/sparse.txt @@ -22,7 +22,7 @@ Documentation/sparse.txt 的中文翻译 --------------------------------------------------------------------- Copyright 2004 Linus Torvalds -Copyright 2004 Pavel Machek <pavel@suse.cz> +Copyright 2004 Pavel Machek <pavel@ucw.cz> Copyright 2006 Bob Copeland <me@bobcopeland.com> 使用 sparse 工具做类型检查 diff --git a/arch/arm/mach-imx/dma-v1.c b/arch/arm/mach-imx/dma-v1.c index fd1d9197d06..3e8c47c63ba 100644 --- a/arch/arm/mach-imx/dma-v1.c +++ b/arch/arm/mach-imx/dma-v1.c @@ -310,7 +310,7 @@ imx_dma_setup_sg(int channel, imxdma->resbytes = dma_length; if (!sg || !sgcount) { - printk(KERN_ERR "imxdma%d: imx_dma_setup_sg epty sg list\n", + printk(KERN_ERR "imxdma%d: imx_dma_setup_sg empty sg list\n", channel); return -EINVAL; } @@ -760,7 +760,6 @@ EXPORT_SYMBOL(imx_dma_free); * @name: the driver/caller own non-%NULL identification * * This function tries to find a free channel in the specified priority group - * This function tries to find a free channel in the specified priority group * if the priority cannot be achieved it tries to look for free channel * in the higher and then even lower priority groups. * diff --git a/arch/arm/mach-msm/acpuclock-arm11.c b/arch/arm/mach-msm/acpuclock-arm11.c index af5e85b91d0..f060a3959a7 100644 --- a/arch/arm/mach-msm/acpuclock-arm11.c +++ b/arch/arm/mach-msm/acpuclock-arm11.c @@ -98,7 +98,7 @@ struct clkctl_acpu_speed { /* * ACPU speed table. Complete table is shown but certain speeds are commented - * out to optimized speed switching. Initalize loops_per_jiffy to 0. + * out to optimized speed switching. Initialize loops_per_jiffy to 0. * * Table stepping up/down is optimized for 256mhz jumps while staying on the * same PLL. @@ -494,7 +494,7 @@ uint32_t acpuclk_get_switch_time(void) * Clock driver initialization *---------------------------------------------------------------------------*/ -/* Initalize the lpj field in the acpu_freq_tbl. */ +/* Initialize the lpj field in the acpu_freq_tbl. */ static void __init lpj_init(void) { int i; diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index b32ccd954a1..ed8d330522f 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -463,7 +463,7 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate) } if (!ret) { /* - * Switch the parent clock in the heirarchy, and make sure + * Switch the parent clock in the hierarchy, and make sure * that the new parent's usecount is correct. Note: we * enable the new parent before disabling the old to avoid * any unnecessary hardware disable->enable transitions. diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index d522cd70bf5..ba53191ae4c 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -60,7 +60,7 @@ #define SDRC_DLLA_CTRL_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL) .text -/* Function to aquire the semaphore in scratchpad */ +/* Function to acquire the semaphore in scratchpad */ ENTRY(lock_scratchpad_sem) stmfd sp!, {lr} @ save registers on stack wait_sem: diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index 5d5f330c5d9..16e682d5dbb 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -11,7 +11,7 @@ * published by the Free Software Foundation. * * ChangeLog: - * 2006 Pavel Machek <pavel@suse.cz> + * 2006 Pavel Machek <pavel@ucw.cz> * 03-06-2004 John Lenz <lenz@cs.wisc.edu> * 06-04-2002 Chris Larson <kergoth@digitalnemesis.net> * 04-16-2001 Lineo Japan,Inc. ... diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 5f34eb674d6..653b3e0ab7b 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -1561,13 +1561,6 @@ static void __init u300_init_check_chip(void) printk(KERN_INFO "Initializing U300 system on %s baseband chip " \ "(chip ID 0x%04x)\n", chipname, val); -#ifdef CONFIG_MACH_U300_BS26 - if ((val & 0xFF00U) != 0xc800) { - printk(KERN_ERR "Platform configured for BS25/BS26 " \ - "with DB3150 but %s detected, expect problems!", - chipname); - } -#endif #ifdef CONFIG_MACH_U300_BS330 if ((val & 0xFF00U) != 0xd800) { printk(KERN_ERR "Platform configured for BS330 " \ diff --git a/arch/arm/mach-u300/gpio.c b/arch/arm/mach-u300/gpio.c index 5f61fd45a0c..d92790140fe 100644 --- a/arch/arm/mach-u300/gpio.c +++ b/arch/arm/mach-u300/gpio.c @@ -523,7 +523,7 @@ static void gpio_set_initial_values(void) /* * Put all pins that are set to either 'GPIO_OUT' or 'GPIO_NOT_USED' - * to output and 'GPIO_IN' to input for each port. And initalize + * to output and 'GPIO_IN' to input for each port. And initialize * default value on outputs. */ for (i = 0; i < U300_GPIO_NUM_PORTS; i++) { diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c index 8474d05274b..931d26d1a54 100644 --- a/arch/arm/plat-s3c24xx/clock.c +++ b/arch/arm/plat-s3c24xx/clock.c @@ -43,7 +43,7 @@ #include <plat/cpu.h> #include <plat/pll.h> -/* initalise all the clocks */ +/* initialise all the clocks */ void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk, unsigned long hclk, diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c index 8bf79f3efdf..90a20512d68 100644 --- a/arch/arm/plat-samsung/clock.c +++ b/arch/arm/plat-samsung/clock.c @@ -391,7 +391,7 @@ void __init s3c_disable_clocks(struct clk *clkp, int nr_clks) (clkp->enable)(clkp, 0); } -/* initalise all the clocks */ +/* initialise all the clocks */ int __init s3c24xx_register_baseclocks(unsigned long xtal) { diff --git a/arch/arm/plat-spear/padmux.c b/arch/arm/plat-spear/padmux.c index d2aab3adcde..555eec6dc1c 100644 --- a/arch/arm/plat-spear/padmux.c +++ b/arch/arm/plat-spear/padmux.c @@ -66,7 +66,7 @@ static int pmx_mode_set(struct pmx_mode *mode) * If peripheral is not supported by current mode then request is rejected. * Conflicts between peripherals are not handled and peripherals will be * enabled in the order they are present in pmx_dev array. - * In case of conflicts last peripheral enalbed will be present. + * In case of conflicts last peripheral enabled will be present. * Returns -ve on Err otherwise 0 */ static int pmx_devs_enable(struct pmx_dev **devs, u8 count) diff --git a/arch/cris/arch-v32/mm/intmem.c b/arch/cris/arch-v32/mm/intmem.c index 9e8b69cdf19..1b17d92cef8 100644 --- a/arch/cris/arch-v32/mm/intmem.c +++ b/arch/cris/arch-v32/mm/intmem.c @@ -33,8 +33,8 @@ static void crisv32_intmem_init(void) { static int initiated = 0; if (!initiated) { - struct intmem_allocation* alloc = - (struct intmem_allocation*)kmalloc(sizeof *alloc, GFP_KERNEL); + struct intmem_allocation* alloc; + alloc = kmalloc(sizeof *alloc, GFP_KERNEL); INIT_LIST_HEAD(&intmem_allocations); intmem_virtual = ioremap(MEM_INTMEM_START + RESERVED_SIZE, MEM_INTMEM_SIZE - RESERVED_SIZE); @@ -62,9 +62,8 @@ void* crisv32_intmem_alloc(unsigned size, unsigned align) if (allocation->status == STATUS_FREE && allocation->size >= size + alignment) { if (allocation->size > size + alignment) { - struct intmem_allocation* alloc = - (struct intmem_allocation*) - kmalloc(sizeof *alloc, GFP_ATOMIC); + struct intmem_allocation* alloc; + alloc = kmalloc(sizeof *alloc, GFP_ATOMIC); alloc->status = STATUS_FREE; alloc->size = allocation->size - size - alignment; @@ -74,9 +73,7 @@ void* crisv32_intmem_alloc(unsigned size, unsigned align) if (alignment) { struct intmem_allocation *tmp; - tmp = (struct intmem_allocation *) - kmalloc(sizeof *tmp, - GFP_ATOMIC); + tmp = kmalloc(sizeof *tmp, GFP_ATOMIC); tmp->offset = allocation->offset; tmp->size = alignment; tmp->status = STATUS_FREE; diff --git a/arch/h8300/kernel/timer/itu.c b/arch/h8300/kernel/timer/itu.c index 4883ba7103a..a2ae5e95213 100644 --- a/arch/h8300/kernel/timer/itu.c +++ b/arch/h8300/kernel/timer/itu.c @@ -73,7 +73,7 @@ void __init h8300_timer_setup(void) setup_irq(ITUIRQ, &itu_irq); - /* initalize timer */ + /* initialize timer */ ctrl_outb(0, TSTR); ctrl_outb(CCLR0 | div, ITUBASE + TCR); ctrl_outb(0x01, ITUBASE + TIER); diff --git a/arch/h8300/kernel/timer/timer16.c b/arch/h8300/kernel/timer/timer16.c index 042dbb53f3f..ae0d3816113 100644 --- a/arch/h8300/kernel/timer/timer16.c +++ b/arch/h8300/kernel/timer/timer16.c @@ -68,7 +68,7 @@ void __init h8300_timer_setup(void) setup_irq(_16IRQ, &timer16_irq); - /* initalize timer */ + /* initialize timer */ ctrl_outb(0, TSTR); ctrl_outb(CCLR0 | div, _16BASE + TCR); ctrl_outw(cnt, _16BASE + GRA); diff --git a/arch/h8300/kernel/timer/timer8.c b/arch/h8300/kernel/timer/timer8.c index 38be0cabef0..3946c0fa837 100644 --- a/arch/h8300/kernel/timer/timer8.c +++ b/arch/h8300/kernel/timer/timer8.c @@ -94,7 +94,7 @@ void __init h8300_timer_setup(void) ctrl_bclr(0, MSTPCRL) #endif - /* initalize timer */ + /* initialize timer */ ctrl_outw(cnt, _8BASE + TCORA); ctrl_outw(0x0000, _8BASE + _8TCSR); ctrl_outw((CMIEA|CCLR_CMA|CKS2) << 8 | div, diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c index 21b701374f7..9b109f25e49 100644 --- a/arch/ia64/kvm/kvm-ia64.c +++ b/arch/ia64/kvm/kvm-ia64.c @@ -1237,7 +1237,7 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu) p_ctx->cr[2] = (unsigned long)kvm_vmm_info->vmm_ivt; p_ctx->cr[8] = 0x3c; - /*Initilize region register*/ + /*Initialize region register*/ p_ctx->rr[0] = 0x30; p_ctx->rr[1] = 0x30; p_ctx->rr[2] = 0x30; @@ -1246,7 +1246,7 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu) p_ctx->rr[5] = 0x30; p_ctx->rr[7] = 0x30; - /*Initilize branch register 0*/ + /*Initialize branch register 0*/ p_ctx->br[0] = *(unsigned long *)kvm_vmm_info->vmm_entry; vcpu->arch.vmm_rr = kvm->arch.vmm_init_rr; @@ -1707,7 +1707,7 @@ static int kvm_relocate_vmm(struct kvm_vmm_info *vmm_info, BUG_ON(!module); if (!kvm_vmm_base) { - printk("kvm: kvm area hasn't been initilized yet!!\n"); + printk("kvm: kvm area hasn't been initialized yet!!\n"); return -EFAULT; } diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index d00dfc18002..dbc4cbecb5e 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -507,7 +507,7 @@ static void __init sn_init_pdas(char **cmdline_p) cnodeid_t cnode; /* - * Allocate & initalize the nodepda for each node. + * Allocate & initialize the nodepda for each node. */ for_each_online_node(cnode) { nodepdaindr[cnode] = diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile index 72f6e858374..592c7079de8 100644 --- a/arch/microblaze/Makefile +++ b/arch/microblaze/Makefile @@ -25,7 +25,7 @@ ifeq (,$(findstring spartan2,$(CONFIG_XILINX_MICROBLAZE0_FAMILY))) ifeq ($(CPU_MAJOR),3) CPUFLAGS-1 += -mno-xl-soft-mul else - # USE_HW_MUL can be 0, 1, or 2, defining a heirarchy of HW Mul support. + # USE_HW_MUL can be 0, 1, or 2, defining a hierarchy of HW Mul support. CPUFLAGS-$(subst 1,,$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL)) += -mxl-multiply-high CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL) += -mno-xl-soft-mul endif diff --git a/arch/powerpc/kernel/suspend.c b/arch/powerpc/kernel/suspend.c index 6fc6328dc62..0167d53da30 100644 --- a/arch/powerpc/kernel/suspend.c +++ b/arch/powerpc/kernel/suspend.c @@ -3,7 +3,7 @@ * * Distribute under GPLv2 * - * Copyright (c) 2002 Pavel Machek <pavel@suse.cz> + * Copyright (c) 2002 Pavel Machek <pavel@ucw.cz> * Copyright (c) 2001 Patrick Mochel <mochel@osdl.org> */ diff --git a/arch/powerpc/platforms/ps3/htab.c b/arch/powerpc/platforms/ps3/htab.c index 2c0ed87f202..3124cf791eb 100644 --- a/arch/powerpc/platforms/ps3/htab.c +++ b/arch/powerpc/platforms/ps3/htab.c @@ -136,7 +136,7 @@ static long ps3_hpte_updatepp(unsigned long slot, unsigned long newpp, * As lv1_read_htab_entries() does not give us the RPN, we can * not synthesize the new hpte_r value here, and therefore can * not update the hpte with lv1_insert_htab_entry(), so we - * insted invalidate it and ask the caller to update it via + * instead invalidate it and ask the caller to update it via * ps3_hpte_insert() by returning a -1 value. */ if (!HPTE_V_COMPARE(hpte_v, want_v) || !(hpte_v & HPTE_V_VALID)) { diff --git a/arch/sh/kernel/clkdev.c b/arch/sh/kernel/clkdev.c index defdd6e3090..befc255830a 100644 --- a/arch/sh/kernel/clkdev.c +++ b/arch/sh/kernel/clkdev.c @@ -36,7 +36,7 @@ static DEFINE_MUTEX(clocks_mutex); * If an entry has a device ID, it must match * If an entry has a connection ID, it must match * Then we take the most specific entry - with the following - * order of precidence: dev+con > dev only > con only. + * order of precedence: dev+con > dev only > con only. */ static struct clk *clk_find(const char *dev_id, const char *con_id) { diff --git a/arch/sparc/boot/btfixupprep.c b/arch/sparc/boot/btfixupprep.c index e7f2940bd27..da031159e2b 100644 --- a/arch/sparc/boot/btfixupprep.c +++ b/arch/sparc/boot/btfixupprep.c @@ -216,7 +216,7 @@ main1: switch (buffer[nbase+3]) { case 'f': if (initval) { - fprintf(stderr, "Cannot use pre-initalized fixups for calls\n%s\n", buffer); + fprintf(stderr, "Cannot use pre-initialized fixups for calls\n%s\n", buffer); exit(1); } if (!strcmp (sect, "__ksymtab")) { @@ -273,7 +273,7 @@ main1: break; case 'i': if (initval) { - fprintf(stderr, "Cannot use pre-initalized fixups for INT\n%s\n", buffer); + fprintf(stderr, "Cannot use pre-initialized fixups for INT\n%s\n", buffer); exit(1); } if (strncmp (buffer + mode+9, "HI22 ", 10) && strncmp (buffer + mode+9, "LO10 ", 10)) { diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index fcc3c61fdec..33cec152070 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -2,7 +2,7 @@ * sleep.c - x86-specific ACPI sleep support. * * Copyright (C) 2001-2003 Patrick Mochel - * Copyright (C) 2001-2003 Pavel Machek <pavel@suse.cz> + * Copyright (C) 2001-2003 Pavel Machek <pavel@ucw.cz> */ #include <linux/acpi.h> diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index a96489ee6ca..980508c7908 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -460,7 +460,7 @@ static void lapic_timer_broadcast(const struct cpumask *mask) } /* - * Setup the local APIC timer for this CPU. Copy the initilized values + * Setup the local APIC timer for this CPU. Copy the initialized values * of the boot CPU and register the clock event in the framework. */ static void __cpuinit setup_APIC_timer(void) diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c index c4f9182ca3a..4c9c67bf09b 100644 --- a/arch/x86/kernel/apm_32.c +++ b/arch/x86/kernel/apm_32.c @@ -140,7 +140,7 @@ * is now the way life works). * Fix thinko in suspend() (wrong return). * Notify drivers on critical suspend. - * Make kapmd absorb more idle time (Pavel Machek <pavel@suse.cz> + * Make kapmd absorb more idle time (Pavel Machek <pavel@ucw.cz> * modified by sfr). * Disable interrupts while we are suspended (Andy Henroid * <andy_henroid@yahoo.com> fixed by sfr). diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index 3e90cce3dc8..1376f4144b3 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -9,7 +9,7 @@ * Based on the powernow-k7.c module written by Dave Jones. * (C) 2003 Dave Jones on behalf of SuSE Labs * (C) 2004 Dominik Brodowski <linux@brodo.de> - * (C) 2004 Pavel Machek <pavel@suse.cz> + * (C) 2004 Pavel Machek <pavel@ucw.cz> * Licensed under the terms of the GNU GPL License version 2. * Based upon datasheets & sample CPUs kindly provided by AMD. * diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c index b2e24603739..784360c0625 100644 --- a/arch/x86/kernel/head32.c +++ b/arch/x86/kernel/head32.c @@ -20,7 +20,7 @@ static void __init i386_default_early_setup(void) { - /* Initilize 32bit specific setup functions */ + /* Initialize 32bit specific setup functions */ x86_init.resources.probe_roms = probe_roms; x86_init.resources.reserve_resources = i386_reserve_resources; x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc; diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index ee41bba315d..9a6674689a2 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -2,7 +2,7 @@ * linux/arch/x86_64/mm/init.c * * Copyright (C) 1995 Linus Torvalds - * Copyright (C) 2000 Pavel Machek <pavel@suse.cz> + * Copyright (C) 2000 Pavel Machek <pavel@ucw.cz> * Copyright (C) 2002,2003 Andi Kleen <ak@suse.de> */ diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c index 1290ba54b35..e7e8c5f5495 100644 --- a/arch/x86/power/cpu.c +++ b/arch/x86/power/cpu.c @@ -4,7 +4,7 @@ * Distribute under GPLv2 * * Copyright (c) 2007 Rafael J. Wysocki <rjw@sisk.pl> - * Copyright (c) 2002 Pavel Machek <pavel@suse.cz> + * Copyright (c) 2002 Pavel Machek <pavel@ucw.cz> * Copyright (c) 2001 Patrick Mochel <mochel@osdl.org> */ diff --git a/arch/x86/power/hibernate_64.c b/arch/x86/power/hibernate_64.c index d24f983ba1e..460f314d13e 100644 --- a/arch/x86/power/hibernate_64.c +++ b/arch/x86/power/hibernate_64.c @@ -4,7 +4,7 @@ * Distribute under GPLv2 * * Copyright (c) 2007 Rafael J. Wysocki <rjw@sisk.pl> - * Copyright (c) 2002 Pavel Machek <pavel@suse.cz> + * Copyright (c) 2002 Pavel Machek <pavel@ucw.cz> * Copyright (c) 2001 Patrick Mochel <mochel@osdl.org> */ diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 51ceaee98f9..e1e7143ca1e 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -335,7 +335,7 @@ static void cciss_map_sg_chain_block(ctlr_info_t *h, CommandList_struct *c, static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG", "UNKNOWN" }; -#define RAID_UNKNOWN (sizeof(raid_label) / sizeof(raid_label[0])-1) +#define RAID_UNKNOWN (ARRAY_SIZE(raid_label)-1) #ifdef CONFIG_PROC_FS diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c index dff48701b84..ec1711f7c5c 100644 --- a/drivers/block/drbd/drbd_receiver.c +++ b/drivers/block/drbd/drbd_receiver.c @@ -1087,7 +1087,7 @@ static enum finish_epoch drbd_may_finish_epoch(struct drbd_conf *mdev, } else { epoch->flags = 0; atomic_set(&epoch->epoch_size, 0); - /* atomic_set(&epoch->active, 0); is alrady zero */ + /* atomic_set(&epoch->active, 0); is already zero */ if (rv == FE_STILL_LIVE) rv = FE_RECYCLED; } diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 218d091f3c5..16c3c8613cd 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -4,7 +4,7 @@ * Note that you can not swap over this thing, yet. Seems to work but * deadlocks sometimes - you can not swap over TCP in general. * - * Copyright 1997-2000, 2008 Pavel Machek <pavel@suse.cz> + * Copyright 1997-2000, 2008 Pavel Machek <pavel@ucw.cz> * Parts copyright 2001 Steven Whitehouse <steve@chygwyn.com> * * This file is released under GPLv2 or later. diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c index 4561ce2fba6..334cf5c8c8b 100644 --- a/drivers/char/synclink_gt.c +++ b/drivers/char/synclink_gt.c @@ -4845,7 +4845,7 @@ static int register_test(struct slgt_info *info) { static unsigned short patterns[] = {0x0000, 0xffff, 0xaaaa, 0x5555, 0x6969, 0x9696}; - static unsigned int count = sizeof(patterns)/sizeof(patterns[0]); + static unsigned int count = ARRAY_SIZE(patterns); unsigned int i; int rc = 0; diff --git a/drivers/crypto/amcc/crypto4xx_reg_def.h b/drivers/crypto/amcc/crypto4xx_reg_def.h index 7d4edb00261..5f5fbc0716f 100644 --- a/drivers/crypto/amcc/crypto4xx_reg_def.h +++ b/drivers/crypto/amcc/crypto4xx_reg_def.h @@ -113,7 +113,7 @@ #define CRYPTO4XX_PRNG_LFSR_H 0x00070034 /** - * Initilize CRYPTO ENGINE registers, and memory bases. + * Initialize CRYPTO ENGINE registers, and memory bases. */ #define PPC4XX_PDR_POLL 0x3ff #define PPC4XX_OUTPUT_THRESHOLD 2 diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index bd5250e8c00..e88076022a7 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -69,7 +69,7 @@ static struct at_desc *atc_first_queued(struct at_dma_chan *atchan) } /** - * atc_alloc_descriptor - allocate and return an initilized descriptor + * atc_alloc_descriptor - allocate and return an initialized descriptor * @chan: the channel to allocate descriptors for * @gfp_flags: GFP allocation flags * diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index 8088b14ba5f..f0fd6db6063 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -10,7 +10,7 @@ * Description: * DMA engine driver for Freescale MPC8540 DMA controller, which is * also fit for MPC8560, MPC8555, MPC8548, MPC8641, and etc. - * The support for MPC8349 DMA contorller is also added. + * The support for MPC8349 DMA controller is also added. * * This driver instructs the DMA controller to issue the PCI Read Multiple * command for PCI read operations, instead of using the default PCI Read Line diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index f87bf104df7..9585e531ac6 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -929,13 +929,11 @@ drm_mode_do_interlace_quirk(struct drm_display_mode *mode, { 1440, 576 }, { 2880, 576 }, }; - static const int n_sizes = - sizeof(cea_interlaced)/sizeof(cea_interlaced[0]); if (!(pt->misc & DRM_EDID_PT_INTERLACED)) return; - for (i = 0; i < n_sizes; i++) { + for (i = 0; i < ARRAY_SIZE(cea_interlaced); i++) { if ((mode->hdisplay == cea_interlaced[i].w) && (mode->vdisplay == cea_interlaced[i].h / 2)) { mode->vdisplay *= 2; @@ -1375,7 +1373,6 @@ static const struct { { 1920, 1440, 60, 0 }, { 1920, 1440, 75, 0 }, }; -static const int num_est3_modes = sizeof(est3_modes) / sizeof(est3_modes[0]); static int drm_est3_modes(struct drm_connector *connector, struct detailed_timing *timing) @@ -1387,7 +1384,7 @@ drm_est3_modes(struct drm_connector *connector, struct detailed_timing *timing) for (i = 0; i < 6; i++) { for (j = 7; j > 0; j--) { m = (i * 8) + (7 - j); - if (m >= num_est3_modes) + if (m >= ARRAY_SIZE(est3_modes)) break; if (est[i] & (1 << j)) { mode = drm_mode_find_dmt(connector->dev, diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 76993ac16cc..03c231be227 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -392,13 +392,13 @@ static void intel_sdvo_debug_write(struct intel_encoder *intel_encoder, u8 cmd, DRM_LOG_KMS("%02X ", ((u8 *)args)[i]); for (; i < 8; i++) DRM_LOG_KMS(" "); - for (i = 0; i < sizeof(sdvo_cmd_names) / sizeof(sdvo_cmd_names[0]); i++) { + for (i = 0; i < ARRAY_SIZE(sdvo_cmd_names); i++) { if (cmd == sdvo_cmd_names[i].cmd) { DRM_LOG_KMS("(%s)", sdvo_cmd_names[i].name); break; } } - if (i == sizeof(sdvo_cmd_names)/ sizeof(sdvo_cmd_names[0])) + if (i == ARRAY_SIZE(sdvo_cmd_names)) DRM_LOG_KMS("(%02X)", cmd); DRM_LOG_KMS("\n"); } diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c index 6d553c29d10..d2d4e4045ca 100644 --- a/drivers/gpu/drm/i915/intel_tv.c +++ b/drivers/gpu/drm/i915/intel_tv.c @@ -1424,7 +1424,7 @@ intel_tv_get_modes(struct drm_connector *connector) int j, count = 0; u64 tmp; - for (j = 0; j < sizeof(input_res_table) / sizeof(input_res_table[0]); + for (j = 0; j < ARRAY_SIZE(input_res_table); j++) { struct input_res *input = &input_res_table[j]; unsigned int hactive_s = input->w; diff --git a/drivers/gpu/drm/savage/savage_bci.c b/drivers/gpu/drm/savage/savage_bci.c index 2d0c9ca484c..fa05cda8c98 100644 --- a/drivers/gpu/drm/savage/savage_bci.c +++ b/drivers/gpu/drm/savage/savage_bci.c @@ -552,7 +552,7 @@ int savage_driver_load(struct drm_device *dev, unsigned long chipset) /* - * Initalize mappings. On Savage4 and SavageIX the alignment + * Initialize mappings. On Savage4 and SavageIX the alignment * and size of the aperture is not suitable for automatic MTRR setup * in drm_addmap. Therefore we add them manually before the maps are * initialized, and tear them down on last close. diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c index 8612378b131..5f2d5df01e5 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c @@ -1017,7 +1017,7 @@ int vmw_gmr_id_alloc(struct vmw_private *dev_priv, uint32_t *p_id) } /* - * Stream managment + * Stream management */ static void vmw_stream_destroy(struct vmw_resource *res) diff --git a/drivers/ide/ide-gd.c b/drivers/ide/ide-gd.c index c102d23d9b3..79399534782 100644 --- a/drivers/ide/ide-gd.c +++ b/drivers/ide/ide-gd.c @@ -92,7 +92,7 @@ static void ide_disk_release(struct device *dev) /* * On HPA drives the capacity needs to be - * reinitilized on resume otherwise the disk + * reinitialized on resume otherwise the disk * can not be used and a hard reset is required */ static void ide_gd_resume(ide_drive_t *drive) diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c index ae47bfd22bd..9bbb65bba67 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_qp.c +++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c @@ -816,7 +816,7 @@ static void __flush_qp(struct iwch_qp *qhp, unsigned long *flag) atomic_inc(&qhp->refcnt); spin_unlock_irqrestore(&qhp->lock, *flag); - /* locking heirarchy: cq lock first, then qp lock. */ + /* locking hierarchy: cq lock first, then qp lock. */ spin_lock_irqsave(&rchp->lock, *flag); spin_lock(&qhp->lock); cxio_flush_hw_cq(&rchp->cq); @@ -827,7 +827,7 @@ static void __flush_qp(struct iwch_qp *qhp, unsigned long *flag) if (flushed) (*rchp->ibcq.comp_handler)(&rchp->ibcq, rchp->ibcq.cq_context); - /* locking heirarchy: cq lock first, then qp lock. */ + /* locking hierarchy: cq lock first, then qp lock. */ spin_lock_irqsave(&schp->lock, *flag); spin_lock(&qhp->lock); cxio_flush_hw_cq(&schp->cq); diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c index 7065cb31055..86b93f2ecca 100644 --- a/drivers/infiniband/hw/cxgb4/qp.c +++ b/drivers/infiniband/hw/cxgb4/qp.c @@ -905,7 +905,7 @@ static void __flush_qp(struct c4iw_qp *qhp, struct c4iw_cq *rchp, atomic_inc(&qhp->refcnt); spin_unlock_irqrestore(&qhp->lock, *flag); - /* locking heirarchy: cq lock first, then qp lock. */ + /* locking hierarchy: cq lock first, then qp lock. */ spin_lock_irqsave(&rchp->lock, *flag); spin_lock(&qhp->lock); c4iw_flush_hw_cq(&rchp->cq); @@ -916,7 +916,7 @@ static void __flush_qp(struct c4iw_qp *qhp, struct c4iw_cq *rchp, if (flushed) (*rchp->ibcq.comp_handler)(&rchp->ibcq, rchp->ibcq.cq_context); - /* locking heirarchy: cq lock first, then qp lock. */ + /* locking hierarchy: cq lock first, then qp lock. */ spin_lock_irqsave(&schp->lock, *flag); spin_lock(&qhp->lock); c4iw_flush_hw_cq(&schp->cq); diff --git a/drivers/infiniband/hw/ehca/hcp_if.h b/drivers/infiniband/hw/ehca/hcp_if.h index 39c1c3618ec..a46e514c367 100644 --- a/drivers/infiniband/hw/ehca/hcp_if.h +++ b/drivers/infiniband/hw/ehca/hcp_if.h @@ -49,7 +49,7 @@ #include "hipz_hw.h" /* - * hipz_h_alloc_resource_eq allocates EQ resources in HW and FW, initalize + * hipz_h_alloc_resource_eq allocates EQ resources in HW and FW, initialize * resources, create the empty EQPT (ring). */ u64 hipz_h_alloc_resource_eq(const struct ipz_adapter_handle adapter_handle, diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c index 9c5c66d16a2..65eb8929db2 100644 --- a/drivers/infiniband/hw/ipath/ipath_file_ops.c +++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c @@ -2055,7 +2055,7 @@ static int ipath_close(struct inode *in, struct file *fp) mutex_lock(&ipath_mutex); - fd = (struct ipath_filedata *) fp->private_data; + fd = fp->private_data; fp->private_data = NULL; pd = fd->pd; if (!pd) { diff --git a/drivers/input/misc/ad714x.c b/drivers/input/misc/ad714x.c index 0fe27baf5e7..c431d09e401 100644 --- a/drivers/input/misc/ad714x.c +++ b/drivers/input/misc/ad714x.c @@ -1118,7 +1118,7 @@ struct ad714x_chip *ad714x_probe(struct device *dev, u16 bus_type, int irq, if (error) goto err_free_mem; - /* initilize and request sw/hw resources */ + /* initialize and request sw/hw resources */ ad714x_hw_init(ad714x); mutex_init(&ad714x->mutex); diff --git a/drivers/isdn/hardware/mISDN/avmfritz.c b/drivers/isdn/hardware/mISDN/avmfritz.c index d4215369bb5..472a2af7944 100644 --- a/drivers/isdn/hardware/mISDN/avmfritz.c +++ b/drivers/isdn/hardware/mISDN/avmfritz.c @@ -1116,7 +1116,7 @@ fritz_remove_pci(struct pci_dev *pdev) release_card(card); else if (debug) - pr_info("%s: drvdata allready removed\n", __func__); + pr_info("%s: drvdata already removed\n", __func__); } static struct pci_device_id fcpci_ids[] __devinitdata = { diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c index 095ed76ebe8..d3171954fa4 100644 --- a/drivers/isdn/hardware/mISDN/hfcmulti.c +++ b/drivers/isdn/hardware/mISDN/hfcmulti.c @@ -4268,7 +4268,7 @@ init_card(struct hfc_multi *hc) goto error; /* * Finally enable IRQ output - * this is only allowed, if an IRQ routine is allready + * this is only allowed, if an IRQ routine is already * established for this HFC, so don't do that earlier */ spin_lock_irqsave(&hc->lock, flags); @@ -5212,7 +5212,7 @@ static void __devexit hfc_remove_pci(struct pci_dev *pdev) spin_unlock_irqrestore(&HFClock, flags); } else { if (debug) - printk(KERN_DEBUG "%s: drvdata allready removed\n", + printk(KERN_DEBUG "%s: drvdata already removed\n", __func__); } } diff --git a/drivers/isdn/hardware/mISDN/hfcpci.c b/drivers/isdn/hardware/mISDN/hfcpci.c index 5940a2c1207..65ded057601 100644 --- a/drivers/isdn/hardware/mISDN/hfcpci.c +++ b/drivers/isdn/hardware/mISDN/hfcpci.c @@ -1773,7 +1773,7 @@ init_card(struct hfc_pci *hc) inithfcpci(hc); /* * Finally enable IRQ output - * this is only allowed, if an IRQ routine is allready + * this is only allowed, if an IRQ routine is already * established for this HFC, so don't do that earlier */ enable_hwirq(hc); diff --git a/drivers/isdn/hardware/mISDN/mISDNinfineon.c b/drivers/isdn/hardware/mISDN/mISDNinfineon.c index f5b3d2b26a0..4975976e93a 100644 --- a/drivers/isdn/hardware/mISDN/mISDNinfineon.c +++ b/drivers/isdn/hardware/mISDN/mISDNinfineon.c @@ -1150,7 +1150,7 @@ inf_remove(struct pci_dev *pdev) if (card) release_card(card); else - pr_debug("%s: drvdata allready removed\n", __func__); + pr_debug("%s: drvdata already removed\n", __func__); } static struct pci_driver infineon_driver = { diff --git a/drivers/isdn/hardware/mISDN/speedfax.c b/drivers/isdn/hardware/mISDN/speedfax.c index d097a4e40e2..9e07246bb9e 100644 --- a/drivers/isdn/hardware/mISDN/speedfax.c +++ b/drivers/isdn/hardware/mISDN/speedfax.c @@ -484,7 +484,7 @@ sfax_remove_pci(struct pci_dev *pdev) if (card) release_card(card); else - pr_debug("%s: drvdata allready removed\n", __func__); + pr_debug("%s: drvdata already removed\n", __func__); } static struct pci_device_id sfaxpci_ids[] __devinitdata = { diff --git a/drivers/isdn/hardware/mISDN/w6692.c b/drivers/isdn/hardware/mISDN/w6692.c index 31f9d71fb22..9e84870b971 100644 --- a/drivers/isdn/hardware/mISDN/w6692.c +++ b/drivers/isdn/hardware/mISDN/w6692.c @@ -1402,7 +1402,7 @@ w6692_remove_pci(struct pci_dev *pdev) release_card(card); else if (debug) - pr_notice("%s: drvdata allready removed\n", __func__); + pr_notice("%s: drvdata already removed\n", __func__); } static struct pci_device_id w6692_ids[] = { diff --git a/drivers/isdn/hisax/callc.c b/drivers/isdn/hisax/callc.c index f58ded8f403..f150330b5a2 100644 --- a/drivers/isdn/hisax/callc.c +++ b/drivers/isdn/hisax/callc.c @@ -1172,7 +1172,7 @@ CallcFreeChan(struct IsdnCardState *csta) kfree(csta->channel[i].b_st); csta->channel[i].b_st = NULL; } else - printk(KERN_WARNING "CallcFreeChan b_st ch%d allready freed\n", i); + printk(KERN_WARNING "CallcFreeChan b_st ch%d already freed\n", i); if (i || test_bit(FLG_TWO_DCHAN, &csta->HW_Flags)) { release_d_st(csta->channel + i); } else diff --git a/drivers/isdn/hisax/tei.c b/drivers/isdn/hisax/tei.c index f4cb178b066..842f9c9e875 100644 --- a/drivers/isdn/hisax/tei.c +++ b/drivers/isdn/hisax/tei.c @@ -130,7 +130,7 @@ tei_id_request(struct FsmInst *fi, int event, void *arg) if (st->l2.tei != -1) { st->ma.tei_m.printdebug(&st->ma.tei_m, - "assign request for allready asigned tei %d", + "assign request for already asigned tei %d", st->l2.tei); return; } diff --git a/drivers/isdn/mISDN/tei.c b/drivers/isdn/mISDN/tei.c index 34e898fe2f4..1b85d9d2749 100644 --- a/drivers/isdn/mISDN/tei.c +++ b/drivers/isdn/mISDN/tei.c @@ -457,7 +457,7 @@ tei_id_request(struct FsmInst *fi, int event, void *arg) if (tm->l2->tei != GROUP_TEI) { tm->tei_m.printdebug(&tm->tei_m, - "assign request for allready assigned tei %d", + "assign request for already assigned tei %d", tm->l2->tei); return; } diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c index 0c87a3c3899..a19f649666d 100644 --- a/drivers/media/dvb/siano/smscoreapi.c +++ b/drivers/media/dvb/siano/smscoreapi.c @@ -1297,7 +1297,7 @@ int smsclient_sendrequest(struct smscore_client_t *client, EXPORT_SYMBOL_GPL(smsclient_sendrequest); -/* old GPIO managments implementation */ +/* old GPIO managements implementation */ int smscore_configure_gpio(struct smscore_device_t *coredev, u32 pin, struct smscore_config_gpio *pinconfig) { diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c index 0c786e00ebc..d0a133abe76 100644 --- a/drivers/media/video/gspca/sunplus.c +++ b/drivers/media/video/gspca/sunplus.c @@ -805,7 +805,7 @@ static int sd_init(struct gspca_dev *gspca_dev) /* Set AE AWB Banding Type 3-> 50Hz 2-> 60Hz */ spca504A_acknowledged_command(gspca_dev, 0x24, 8, 3, 0x9e, 1); - /* Twice sequencial need status 0xff->0x9e->0x9d */ + /* Twice sequential need status 0xff->0x9e->0x9d */ spca504A_acknowledged_command(gspca_dev, 0x24, 8, 3, 0x9e, 0); @@ -880,7 +880,7 @@ static int sd_start(struct gspca_dev *gspca_dev) /* Set AE AWB Banding Type 3-> 50Hz 2-> 60Hz */ spca504A_acknowledged_command(gspca_dev, 0x24, 8, 3, 0x9e, 1); - /* Twice sequencial need status 0xff->0x9e->0x9d */ + /* Twice sequential need status 0xff->0x9e->0x9d */ spca504A_acknowledged_command(gspca_dev, 0x24, 8, 3, 0x9e, 0); spca504A_acknowledged_command(gspca_dev, 0x24, diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c index 6030410c667..5d6fd01f918 100644 --- a/drivers/media/video/usbvideo/vicam.c +++ b/drivers/media/video/usbvideo/vicam.c @@ -2,7 +2,7 @@ * USB ViCam WebCam driver * Copyright (c) 2002 Joe Burks (jburks@wavicle.org), * Christopher L Cheney (ccheney@cheney.cx), - * Pavel Machek (pavel@suse.cz), + * Pavel Machek (pavel@ucw.cz), * John Tyner (jtyner@cs.ucr.edu), * Monroe Williams (monroe@pobox.com) * diff --git a/drivers/media/video/v4l2-compat-ioctl32.c b/drivers/media/video/v4l2-compat-ioctl32.c index 9004a5fe764..d2f20c2acae 100644 --- a/drivers/media/video/v4l2-compat-ioctl32.c +++ b/drivers/media/video/v4l2-compat-ioctl32.c @@ -5,7 +5,7 @@ * Copyright (C) 1997-2000 Jakub Jelinek (jakub@redhat.com) * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be) * Copyright (C) 2001,2002 Andi Kleen, SuSE Labs - * Copyright (C) 2003 Pavel Machek (pavel@suse.cz) + * Copyright (C) 2003 Pavel Machek (pavel@ucw.cz) * Copyright (C) 2005 Philippe De Muyter (phdm@macqel.be) * Copyright (C) 2008 Hans Verkuil <hverkuil@xs4all.nl> * diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h index 8997add1248..307e847fe1c 100644 --- a/drivers/media/video/zoran/zoran.h +++ b/drivers/media/video/zoran/zoran.h @@ -391,7 +391,7 @@ struct zoran { struct mutex resource_lock; /* prevent evil stuff */ - u8 initialized; /* flag if zoran has been correctly initalized */ + u8 initialized; /* flag if zoran has been correctly initialized */ int user; /* number of current users */ struct card_info card; struct tvnorm *timing; diff --git a/drivers/media/video/zoran/zoran_device.c b/drivers/media/video/zoran/zoran_device.c index e6ad4b20561..6f846abee3e 100644 --- a/drivers/media/video/zoran/zoran_device.c +++ b/drivers/media/video/zoran/zoran_device.c @@ -484,7 +484,7 @@ zr36057_overlay (struct zoran *zr, zr->overlay_settings.format); /* Start and length of each line MUST be 4-byte aligned. - * This should be allready checked before the call to this routine. + * This should be already checked before the call to this routine. * All error messages are internal driver checking only! */ /* video display top and bottom registers */ diff --git a/drivers/media/video/zoran/zr36050.c b/drivers/media/video/zoran/zr36050.c index 639dd87c663..e1985609af4 100644 --- a/drivers/media/video/zoran/zr36050.c +++ b/drivers/media/video/zoran/zr36050.c @@ -236,7 +236,7 @@ zr36050_pushit (struct zr36050 *ptr, Could be variable, but until it's not needed it they are just fixed to save memory. Otherwise expand zr36050 structure with arrays, push the values to - it and initalize from there, as e.g. the linux zr36057/60 driver does it. + it and initialize from there, as e.g. the linux zr36057/60 driver does it. ========================================================================= */ static const char zr36050_dqt[0x86] = { diff --git a/drivers/media/video/zoran/zr36060.c b/drivers/media/video/zoran/zr36060.c index 008746ff774..5e4f57cbf31 100644 --- a/drivers/media/video/zoran/zr36060.c +++ b/drivers/media/video/zoran/zr36060.c @@ -227,7 +227,7 @@ zr36060_pushit (struct zr36060 *ptr, Could be variable, but until it's not needed it they are just fixed to save memory. Otherwise expand zr36060 structure with arrays, push the values to - it and initalize from there, as e.g. the linux zr36057/60 driver does it. + it and initialize from there, as e.g. the linux zr36057/60 driver does it. ========================================================================= */ static const char zr36060_dqt[0x86] = { diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index a6a57011ba6..14d162fb8a2 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -1794,7 +1794,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) ioc->sh = NULL; ioc->cached_fw = NULL; - /* Initilize SCSI Config Data structure + /* Initialize SCSI Config Data structure */ memset(&ioc->spi_data, 0, sizeof(SpiCfgData)); @@ -2471,7 +2471,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) { /* - * Initalize link list for inactive raid volumes. + * Initialize link list for inactive raid volumes. */ mutex_init(&ioc->raid_data.inactive_list_mutex); INIT_LIST_HEAD(&ioc->raid_data.inactive_list); diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index ca03428b59c..3dfda9cc677 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -1836,7 +1836,7 @@ static struct nand_bbt_descr bbt_mirror_descr = { .pattern = mirror_pattern, }; -/* initalize driver data structures */ +/* initialize driver data structures */ void denali_drv_init(struct denali_nand_info *denali) { denali->idx = 0; diff --git a/drivers/net/3c527.c b/drivers/net/3c527.c index 38395dfa496..70705d1306b 100644 --- a/drivers/net/3c527.c +++ b/drivers/net/3c527.c @@ -729,14 +729,14 @@ static void mc32_halt_transceiver(struct net_device *dev) * mc32_load_rx_ring - load the ring of receive buffers * @dev: 3c527 to build the ring for * - * This initalises the on-card and driver datastructures to + * This initialises the on-card and driver datastructures to * the point where mc32_start_transceiver() can be called. * * The card sets up the receive ring for us. We are required to use the * ring it provides, although the size of the ring is configurable. * * We allocate an sk_buff for each ring entry in turn and - * initalise its house-keeping info. At the same time, we read + * initialise its house-keeping info. At the same time, we read * each 'next' pointer in our rx_ring array. This reduces slow * shared-memory reads and makes it easy to access predecessor * descriptors. diff --git a/drivers/net/appletalk/ipddp.c b/drivers/net/appletalk/ipddp.c index 79636ee3582..0362c8d31a0 100644 --- a/drivers/net/appletalk/ipddp.c +++ b/drivers/net/appletalk/ipddp.c @@ -80,7 +80,7 @@ static struct net_device * __init ipddp_init(void) if (version_printed++ == 0) printk(version); - /* Initalize the device structure. */ + /* Initialize the device structure. */ dev->netdev_ops = &ipddp_netdev_ops; dev->type = ARPHRD_IPDDP; /* IP over DDP tunnel */ diff --git a/drivers/net/benet/be_hw.h b/drivers/net/benet/be_hw.h index 063026de495..3f1b7c3965b 100644 --- a/drivers/net/benet/be_hw.h +++ b/drivers/net/benet/be_hw.h @@ -52,7 +52,7 @@ */ #define MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK (1 << 29) /* bit 29 */ -/********* Power managment (WOL) **********/ +/********* Power management (WOL) **********/ #define PCICFG_PM_CONTROL_OFFSET 0x44 #define PCICFG_PM_CONTROL_MASK 0x108 /* bits 3 & 8 */ diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 28b53d1cd4f..efd4c70753d 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -916,7 +916,7 @@ static void gfar_init_filer_table(struct gfar_private *priv) rqfar = cluster_entry_per_class(priv, rqfar, RQFPR_IPV4 | RQFPR_UDP); rqfar = cluster_entry_per_class(priv, rqfar, RQFPR_IPV4 | RQFPR_TCP); - /* cur_filer_idx indicated the fisrt non-masked rule */ + /* cur_filer_idx indicated the first non-masked rule */ priv->cur_filer_idx = rqfar; /* Rest are masked rules */ diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c index 68e5ac8832a..dfc787fa8b1 100644 --- a/drivers/net/hp100.c +++ b/drivers/net/hp100.c @@ -1071,7 +1071,7 @@ static void hp100_mmuinit(struct net_device *dev) if (lp->mode == 1) hp100_init_pdls(dev); - /* Go to performance page and initalize isr and imr registers */ + /* Go to performance page and initialize isr and imr registers */ hp100_page(PERFORMANCE); hp100_outw(0xfefe, IRQ_MASK); /* mask off all ints */ hp100_outw(0xffff, IRQ_STATUS); /* ack IRQ */ diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c index b150c102ca5..0f1d4e96cf8 100644 --- a/drivers/net/ibm_newemac/core.c +++ b/drivers/net/ibm_newemac/core.c @@ -1045,7 +1045,7 @@ static int emac_change_mtu(struct net_device *ndev, int new_mtu) DBG(dev, "change_mtu(%d)" NL, new_mtu); if (netif_running(ndev)) { - /* Check if we really need to reinitalize RX ring */ + /* Check if we really need to reinitialize RX ring */ if (emac_rx_skb_size(ndev->mtu) != emac_rx_skb_size(new_mtu)) ret = emac_resize_rx_ring(dev, new_mtu); } diff --git a/drivers/net/ksz884x.c b/drivers/net/ksz884x.c index 7805bbf1d53..aa50ee1b024 100644 --- a/drivers/net/ksz884x.c +++ b/drivers/net/ksz884x.c @@ -6812,7 +6812,7 @@ static int stp; static int fast_aging; /** - * netdev_init - initalize network device. + * netdev_init - initialize network device. * @dev: Network device. * * This function initializes the network device. diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ll_temac_main.c index 6474c4973d3..dc6bf042579 100644 --- a/drivers/net/ll_temac_main.c +++ b/drivers/net/ll_temac_main.c @@ -449,7 +449,7 @@ static u32 temac_setoptions(struct net_device *ndev, u32 options) return (0); } -/* Initilize temac */ +/* Initialize temac */ static void temac_device_reset(struct net_device *ndev) { struct temac_local *lp = netdev_priv(ndev); diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index 501a55ffce5..70a9bc5be1a 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -1325,7 +1325,7 @@ static int sh_mdio_init(struct net_device *ndev, int id) bitbang->mdc_msk = 0x01; bitbang->ctrl.ops = &bb_ops; - /* MII contorller setting */ + /* MII controller setting */ mdp->mii_bus = alloc_mdio_bitbang(&bitbang->ctrl); if (!mdp->mii_bus) { ret = -ENOMEM; diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c index 29e6c63d39f..0bc4f3030a8 100644 --- a/drivers/net/tulip/dmfe.c +++ b/drivers/net/tulip/dmfe.c @@ -589,7 +589,7 @@ static int dmfe_open(struct DEVICE *dev) db->dm910x_chk_mode = 1; /* Enter the check mode */ } - /* Initilize DM910X board */ + /* Initialize DM910X board */ dmfe_init_dm910x(dev); /* Active System Interface */ @@ -606,9 +606,9 @@ static int dmfe_open(struct DEVICE *dev) } -/* Initilize DM910X board +/* Initialize DM910X board * Reset DM910X board - * Initilize TX/Rx descriptor chain structure + * Initialize TX/Rx descriptor chain structure * Send the set-up frame * Enable Tx/Rx machine */ @@ -649,7 +649,7 @@ static void dmfe_init_dm910x(struct DEVICE *dev) if ( !(db->media_mode & DMFE_AUTO) ) db->op_mode = db->media_mode; /* Force Mode */ - /* Initiliaze Transmit/Receive decriptor and CR3/4 */ + /* Initialize Transmit/Receive decriptor and CR3/4 */ dmfe_descriptor_init(db, ioaddr); /* Init CR6 to program DM910x operation */ @@ -1288,7 +1288,7 @@ static void dmfe_timer(unsigned long data) * Stop DM910X board * Free Tx/Rx allocated memory * Reset DM910X board - * Re-initilize DM910X board + * Re-initialize DM910X board */ static void dmfe_dynamic_reset(struct DEVICE *dev) @@ -1316,7 +1316,7 @@ static void dmfe_dynamic_reset(struct DEVICE *dev) netif_carrier_off(dev); db->wait_reset = 0; - /* Re-initilize DM910X board */ + /* Re-initialize DM910X board */ dmfe_init_dm910x(dev); /* Restart upper layer interface */ @@ -1447,7 +1447,7 @@ static void update_cr6(u32 cr6_data, unsigned long ioaddr) /* * Send a setup frame for DM9132 - * This setup frame initilize DM910X address filter mode + * This setup frame initialize DM910X address filter mode */ static void dm9132_id_table(struct DEVICE *dev) @@ -1489,7 +1489,7 @@ static void dm9132_id_table(struct DEVICE *dev) /* * Send a setup frame for DM9102/DM9102A - * This setup frame initilize DM910X address filter mode + * This setup frame initialize DM910X address filter mode */ static void send_filter_frame(struct DEVICE *dev) @@ -2142,7 +2142,7 @@ static int dmfe_resume(struct pci_dev *pci_dev) pci_set_power_state(pci_dev, PCI_D0); pci_restore_state(pci_dev); - /* Re-initilize DM910X board */ + /* Re-initialize DM910X board */ dmfe_init_dm910x(dev); /* Disable WOL */ @@ -2196,7 +2196,7 @@ MODULE_PARM_DESC(SF_mode, "Davicom DM9xxx special function " /* Description: * when user used insmod to add module, system invoked init_module() - * to initilize and register. + * to initialize and register. */ static int __init dmfe_init_module(void) diff --git a/drivers/net/wimax/i2400m/control.c b/drivers/net/wimax/i2400m/control.c index d86e8f31e7f..7f48e040c3b 100644 --- a/drivers/net/wimax/i2400m/control.c +++ b/drivers/net/wimax/i2400m/control.c @@ -50,7 +50,7 @@ * * ROADMAP * - * i2400m_dev_initalize() Called by i2400m_dev_start() + * i2400m_dev_initialize() Called by i2400m_dev_start() * i2400m_set_init_config() * i2400m_cmd_get_state() * i2400m_dev_shutdown() Called by i2400m_dev_stop() diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c index 231dbd77f5f..cb3c25f0c19 100644 --- a/drivers/net/wireless/hostap/hostap_ap.c +++ b/drivers/net/wireless/hostap/hostap_ap.c @@ -1225,7 +1225,7 @@ static void ap_crypt_init(struct ap_data *ap) /* Generate challenge data for shared key authentication. IEEE 802.11 specifies - * that WEP algorithm is used for generating challange. This should be unique, + * that WEP algorithm is used for generating challenge. This should be unique, * but otherwise there is not really need for randomness etc. Initialize WEP * with pseudo random key and then use increasing IV to get unique challenge * streams. diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c index 2f999fc94f6..e9d9d622a9b 100644 --- a/drivers/net/wireless/hostap/hostap_hw.c +++ b/drivers/net/wireless/hostap/hostap_hw.c @@ -1896,7 +1896,7 @@ fail: /* Some SMP systems have reported number of odd errors with hostap_pci. fid * register has changed values between consecutive reads for an unknown reason. * This should really not happen, so more debugging is needed. This test - * version is a big slower, but it will detect most of such register changes + * version is a bit slower, but it will detect most of such register changes * and will try to get the correct fid eventually. */ #define EXTRA_FID_READ_TESTS diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c index f511e70d454..75a80e46b39 100644 --- a/drivers/parisc/ccio-dma.c +++ b/drivers/parisc/ccio-dma.c @@ -1241,10 +1241,10 @@ static struct parisc_driver ccio_driver = { }; /** - * ccio_ioc_init - Initalize the I/O Controller + * ccio_ioc_init - Initialize the I/O Controller * @ioc: The I/O Controller. * - * Initalize the I/O Controller which includes setting up the + * Initialize the I/O Controller which includes setting up the * I/O Page Directory, the resource map, and initalizing the * U2/Uturn chip into virtual mode. */ diff --git a/drivers/pcmcia/sa11xx_base.c b/drivers/pcmcia/sa11xx_base.c index fa28d8911b0..0c62fe31a40 100644 --- a/drivers/pcmcia/sa11xx_base.c +++ b/drivers/pcmcia/sa11xx_base.c @@ -231,7 +231,7 @@ int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, sinfo->nskt = nr; - /* Initiliaze processor specific parameters */ + /* Initialize processor specific parameters */ for (i = 0; i < nr; i++) { skt = &sinfo->skt[i]; diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c index 08fa453af97..74e9d22d95f 100644 --- a/drivers/rapidio/rio.c +++ b/drivers/rapidio/rio.c @@ -808,7 +808,7 @@ int rio_std_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount, /** * rio_std_route_get_entry - Read switch route table entry (port number) - * assosiated with specified destID using standard registers defined in RIO + * associated with specified destID using standard registers defined in RIO * specification rev.1.3 * @mport: Master port to issue transaction * @destid: Destination ID of the device diff --git a/drivers/rtc/rtc-fm3130.c b/drivers/rtc/rtc-fm3130.c index ff6fce61ea4..e4de8f37ae4 100644 --- a/drivers/rtc/rtc-fm3130.c +++ b/drivers/rtc/rtc-fm3130.c @@ -104,7 +104,7 @@ static int fm3130_get_time(struct device *dev, struct rtc_time *t) if (!fm3130->data_valid) { /* We have invalid data in RTC, probably due to battery faults or other problems. Return EIO - for now, it will allow us to set data later insted + for now, it will allow us to set data later instead of error during probing which disables device */ return -EIO; } diff --git a/drivers/rtc/rtc-rx8025.c b/drivers/rtc/rtc-rx8025.c index 789f62f9b47..1146e3522d3 100644 --- a/drivers/rtc/rtc-rx8025.c +++ b/drivers/rtc/rtc-rx8025.c @@ -461,7 +461,7 @@ static struct rtc_class_ops rx8025_rtc_ops = { * Clock precision adjustment support * * According to the RX8025 SA/NB application manual the frequency and - * temperature charateristics can be approximated using the following + * temperature characteristics can be approximated using the following * equation: * * df = a * (ut - t)**2 diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c index 7f87979da22..0ec3da6f3e1 100644 --- a/drivers/scsi/advansys.c +++ b/drivers/scsi/advansys.c @@ -9717,7 +9717,7 @@ static ushort __devinit AscInitAscDvcVar(ASC_DVC_VAR *asc_dvc) asc_dvc->bug_fix_cntl = 0; asc_dvc->pci_fix_asyn_xfer = 0; asc_dvc->pci_fix_asyn_xfer_always = 0; - /* asc_dvc->init_state initalized in AscInitGetConfig(). */ + /* asc_dvc->init_state initialized in AscInitGetConfig(). */ asc_dvc->sdtr_done = 0; asc_dvc->cur_total_qng = 0; asc_dvc->is_in_int = 0; diff --git a/drivers/scsi/aic7xxx_old/aic7xxx.seq b/drivers/scsi/aic7xxx_old/aic7xxx.seq index f6fc4b75b5a..5997e7c3a19 100644 --- a/drivers/scsi/aic7xxx_old/aic7xxx.seq +++ b/drivers/scsi/aic7xxx_old/aic7xxx.seq @@ -615,7 +615,7 @@ ultra2_dmafifoflush: * went empty and the next bit of data is copied from * the SCSI fifo into the PCI fifo. It should only * come on when both FIFOs (meaning the entire FIFO - * chain) are emtpy. Since it can take up to 4 cycles + * chain) are empty. Since it can take up to 4 cycles * for new data to be copied from the SCSI fifo into * the PCI fifo, testing for FIFOEMP status for 4 * extra times gives the needed time for any diff --git a/drivers/scsi/aic94xx/aic94xx_seq.c b/drivers/scsi/aic94xx/aic94xx_seq.c index d01dcc62b39..74374618010 100644 --- a/drivers/scsi/aic94xx/aic94xx_seq.c +++ b/drivers/scsi/aic94xx/aic94xx_seq.c @@ -588,7 +588,7 @@ static void asd_init_cseq_mdp(struct asd_ha_struct *asd_ha) * asd_init_cseq_scratch -- setup and init CSEQ * @asd_ha: pointer to host adapter structure * - * Setup and initialize Central sequencers. Initialiaze the mode + * Setup and initialize Central sequencers. Initialize the mode * independent and dependent scratch page to the default settings. */ static void asd_init_cseq_scratch(struct asd_ha_struct *asd_ha) @@ -782,7 +782,7 @@ static void asd_init_lseq_mdp(struct asd_ha_struct *asd_ha, int lseq) asd_write_reg_word(asd_ha, LmSEQ_OOB_INT_ENABLES(lseq), 0); /* * Set the desired interval between transmissions of the NOTIFY - * (ENABLE SPINUP) primitive. Must be initilized to val - 1. + * (ENABLE SPINUP) primitive. Must be initialized to val - 1. */ asd_write_reg_word(asd_ha, LmSEQ_NOTIFY_TIMER_TIMEOUT(lseq), ASD_NOTIFY_TIMEOUT - 1); diff --git a/drivers/scsi/bfa/bfa_core.c b/drivers/scsi/bfa/bfa_core.c index 3a7b3f88932..d84550636ad 100644 --- a/drivers/scsi/bfa/bfa_core.c +++ b/drivers/scsi/bfa/bfa_core.c @@ -335,7 +335,7 @@ bfa_get_pciids(struct bfa_pciid_s **pciids, int *npciids) {BFA_PCI_VENDOR_ID_BROCADE, BFA_PCI_DEVICE_ID_CT}, }; - *npciids = sizeof(__pciids) / sizeof(__pciids[0]); + *npciids = ARRAY_SIZE(__pciids); *pciids = __pciids; } diff --git a/drivers/scsi/bfa/bfa_fcs.c b/drivers/scsi/bfa/bfa_fcs.c index 3516172c597..153cb2a3ffe 100644 --- a/drivers/scsi/bfa/bfa_fcs.c +++ b/drivers/scsi/bfa/bfa_fcs.c @@ -86,7 +86,7 @@ bfa_fcs_attach(struct bfa_fcs_s *fcs, struct bfa_s *bfa, struct bfad_s *bfad, bfa_attach_fcs(bfa); fcbuild_init(); - for (i = 0; i < sizeof(fcs_modules) / sizeof(fcs_modules[0]); i++) { + for (i = 0; i < ARRAY_SIZE(fcs_modules); i++) { mod = &fcs_modules[i]; if (mod->attach) mod->attach(fcs); @@ -102,7 +102,7 @@ bfa_fcs_init(struct bfa_fcs_s *fcs) int i; struct bfa_fcs_mod_s *mod; - for (i = 0; i < sizeof(fcs_modules) / sizeof(fcs_modules[0]); i++) { + for (i = 0; i < ARRAY_SIZE(fcs_modules); i++) { mod = &fcs_modules[i]; if (mod->modinit) mod->modinit(fcs); @@ -163,13 +163,11 @@ void bfa_fcs_exit(struct bfa_fcs_s *fcs) { struct bfa_fcs_mod_s *mod; - int nmods, i; + int i; bfa_wc_init(&fcs->wc, bfa_fcs_exit_comp, fcs); - nmods = sizeof(fcs_modules) / sizeof(fcs_modules[0]); - - for (i = 0; i < nmods; i++) { + for (i = 0; i < ARRAY_SIZE(fcs_modules); i++) { mod = &fcs_modules[i]; if (mod->modexit) { diff --git a/drivers/scsi/bfa/bfa_ioim.c b/drivers/scsi/bfa/bfa_ioim.c index 687f3d6e252..3d2eac10430 100644 --- a/drivers/scsi/bfa/bfa_ioim.c +++ b/drivers/scsi/bfa/bfa_ioim.c @@ -488,7 +488,7 @@ bfa_ioim_sm_cleanup_qfull(struct bfa_ioim_s *ioim, enum bfa_ioim_event event) case BFA_IOIM_SM_ABORT: /** - * IO is alraedy being cleaned up implicitly + * IO is already being cleaned up implicitly */ ioim->io_cbfn = __bfa_cb_ioim_abort; break; diff --git a/drivers/scsi/bfa/vport.c b/drivers/scsi/bfa/vport.c index 27cd619a227..e2720c8a666 100644 --- a/drivers/scsi/bfa/vport.c +++ b/drivers/scsi/bfa/vport.c @@ -789,7 +789,7 @@ bfa_cb_lps_fdisc_comp(void *bfad, void *uarg, bfa_status_t status) switch (status) { case BFA_STATUS_OK: /* - * Initialiaze the V-Port fields + * Initialize the V-Port fields */ __vport_fcid(vport) = bfa_lps_get_pid(vport->lps); vport->vport_stats.fdisc_accepts++; diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index 44a07593de5..fe568effe96 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -2452,7 +2452,7 @@ module_exit(fcoe_exit); * @fp: response frame, or error encoded in a pointer (timeout) * @arg: pointer the the fcoe_ctlr structure * - * This handles MAC address managment for FCoE, then passes control on to + * This handles MAC address management for FCoE, then passes control on to * the libfc FLOGI response handler. */ static void fcoe_flogi_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg) @@ -2484,7 +2484,7 @@ done: * @fp: response frame, or error encoded in a pointer (timeout) * @arg: pointer the the fcoe_ctlr structure * - * This handles MAC address managment for FCoE, then passes control on to + * This handles MAC address management for FCoE, then passes control on to * the libfc LOGO response handler. */ static void fcoe_logo_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg) diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index 104e0fba7c4..ca52bfa4a1e 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -219,8 +219,6 @@ static void fc_exch_els_rrq(struct fc_seq *, struct fc_frame *); */ static char *fc_exch_rctl_names[] = FC_RCTL_NAMES_INIT; -#define FC_TABLE_SIZE(x) (sizeof(x) / sizeof(x[0])) - /** * fc_exch_name_lookup() - Lookup name by opcode * @op: Opcode to be looked up @@ -249,7 +247,7 @@ static inline const char *fc_exch_name_lookup(unsigned int op, char **table, static const char *fc_exch_rctl_name(unsigned int op) { return fc_exch_name_lookup(op, fc_exch_rctl_names, - FC_TABLE_SIZE(fc_exch_rctl_names)); + ARRAY_SIZE(fc_exch_rctl_names)); } /** diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index 79c9e3ccd34..ef32b065a47 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -32,11 +32,11 @@ * invalid SID. We also need to ensure that states don't change unexpectedly * while processing another state. * - * HEIRARCHY + * HIERARCHY * - * The following heirarchy defines the locking rules. A greater lock + * The following hierarchy defines the locking rules. A greater lock * may be held before acquiring a lesser lock, but a lesser lock should never - * be held while attempting to acquire a greater lock. Here is the heirarchy- + * be held while attempting to acquire a greater lock. Here is the hierarchy- * * lport > disc, lport > rport, disc > rport * diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index 39e440f0f54..2aa59934010 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -34,7 +34,7 @@ * The rport should never hold the rport mutex and then attempt to acquire * either the lport or disc mutexes. The rport's mutex is considered lesser * than both the lport's mutex and the disc mutex. Refer to fc_lport.c for - * more comments on the heirarchy. + * more comments on the hierarchy. * * The locking strategy is similar to the lport's strategy. The lock protects * the rport's states and is held and released by the entry points to the rport diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h index b4afe431ac1..41c29a86e83 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.h +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h @@ -474,7 +474,7 @@ typedef void (*MPT_ADD_SGE)(void *paddr, u32 flags_length, dma_addr_t dma_addr); * @shost_recovery: host reset in progress * @ioc_reset_in_progress_lock: * @ioc_link_reset_in_progress: phy/hard reset in progress - * @ignore_loginfos: ignore loginfos during task managment + * @ignore_loginfos: ignore loginfos during task management * @remove_host: flag for when driver unloads, to avoid sending dev resets * @wait_for_port_enable_to_complete: * @msix_enable: flag indicating msix is enabled diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index c5ff26a2a51..06d645a36f1 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -2979,7 +2979,7 @@ _scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *)) /* host recovery or link resets sent via IOCTLs */ if (ioc->shost_recovery || ioc->ioc_link_reset_in_progress) return SCSI_MLQUEUE_HOST_BUSY; - /* device busy with task managment */ + /* device busy with task management */ else if (sas_device_priv_data->block || sas_target_priv_data->tm_busy) return SCSI_MLQUEUE_DEVICE_BUSY; /* device has been deleted */ @@ -6845,7 +6845,7 @@ _scsih_init(void) /* queuecommand callback hander */ scsi_io_cb_idx = mpt2sas_base_register_callback_handler(_scsih_io_done); - /* task managment callback handler */ + /* task management callback handler */ tm_cb_idx = mpt2sas_base_register_callback_handler(_scsih_tm_done); /* base internal commands callback handler */ diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index 5ff8261c5d6..e81efac25fa 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -1082,7 +1082,7 @@ static void pm8001_hw_chip_rst(struct pm8001_hba_info *pm8001_ha) } /** - * pm8001_chip_iounmap - which maped when initilized. + * pm8001_chip_iounmap - which maped when initialized. * @pm8001_ha: our hba card information */ static void pm8001_chip_iounmap(struct pm8001_hba_info *pm8001_ha) @@ -4152,7 +4152,7 @@ static int pm8001_chip_abort_task(struct pm8001_hba_info *pm8001_ha, } /** - * pm8001_chip_ssp_tm_req - built the task managment command. + * pm8001_chip_ssp_tm_req - built the task management command. * @pm8001_ha: our hba card information. * @ccb: the ccb information. * @tmf: task management function. diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c index 8ef94536541..782b30d0eea 100644 --- a/drivers/scsi/qla2xxx/qla_iocb.c +++ b/drivers/scsi/qla2xxx/qla_iocb.c @@ -1129,7 +1129,7 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt, cmd_pkt->fcp_cmnd_dseg_address[1] = cpu_to_le32( MSD(crc_ctx_dma + CRC_CONTEXT_FCPCMND_OFF)); fcp_cmnd->task_attribute = 0; - fcp_cmnd->task_managment = 0; + fcp_cmnd->task_management = 0; cmd_pkt->fcp_rsp_dseg_len = 0; /* Let response come in status iocb */ diff --git a/drivers/scsi/qla2xxx/qla_nx.h b/drivers/scsi/qla2xxx/qla_nx.h index f8f99a5ea53..1b44d013f15 100644 --- a/drivers/scsi/qla2xxx/qla_nx.h +++ b/drivers/scsi/qla2xxx/qla_nx.h @@ -832,7 +832,7 @@ struct fcp_cmnd { struct scsi_lun lun; uint8_t crn; uint8_t task_attribute; - uint8_t task_managment; + uint8_t task_management; uint8_t additional_cdb_len; uint8_t cdb[260]; /* 256 for CDB len and 4 for FCP_DL */ }; diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c index 5510df8a7fa..cd3043265a6 100644 --- a/drivers/scsi/qla4xxx/ql4_init.c +++ b/drivers/scsi/qla4xxx/ql4_init.c @@ -183,7 +183,7 @@ static int qla4xxx_validate_mac_address(struct scsi_qla_host *ha) **/ static int qla4xxx_init_local_data(struct scsi_qla_host *ha) { - /* Initilize aen queue */ + /* Initialize aen queue */ ha->aen_q_count = MAX_AEN_ENTRIES; return qla4xxx_get_firmware_status(ha); diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index 06813789145..edb6b362a8f 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -965,7 +965,7 @@ static FC_DEVICE_ATTR(rport, fast_io_fail_tmo, S_IRUGO | S_IWUSR, /* * Note: in the target show function we recognize when the remote - * port is in the heirarchy and do not allow the driver to get + * port is in the hierarchy and do not allow the driver to get * involved in sysfs functions. The driver only gets involved if * it's the "old" style that doesn't use rports. */ diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c index 24661cd5e4f..768612f8e41 100644 --- a/drivers/serial/68360serial.c +++ b/drivers/serial/68360serial.c @@ -2649,7 +2649,7 @@ static int __init rs_360_init(void) sup->tfcr = SMC_EB; /* Set this to 1 for now, so we get single - * character interrupts. Using idle charater + * character interrupts. Using idle character * time requires some additional tuning. */ sup->mrblr = 1; @@ -2728,7 +2728,7 @@ static int __init rs_360_init(void) up->tfcr = SMC_EB; /* Set this to 1 for now, so we get single - * character interrupts. Using idle charater + * character interrupts. Using idle character * time requires some additional tuning. */ up->mrblr = 1; @@ -2886,7 +2886,7 @@ int serial_console_setup( struct console *co, char *options) sup->tfcr = SMC_EB; /* Set this to 1 for now, so we get single - * character interrupts. Using idle charater + * character interrupts. Using idle character * time requires some additional tuning. */ sup->mrblr = 1; diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index cd6cf575902..6016179db53 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -852,7 +852,7 @@ static void cpm_uart_init_smc(struct uart_cpm_port *pinfo) */ cpm_set_smc_fcr(up); - /* Using idle charater time requires some additional tuning. */ + /* Using idle character time requires some additional tuning. */ out_be16(&up->smc_mrblr, pinfo->rx_fifosize); out_be16(&up->smc_maxidl, pinfo->rx_fifosize); out_be16(&up->smc_brklen, 0); diff --git a/drivers/serial/nwpserial.c b/drivers/serial/nwpserial.c index 3c02fa96f28..e65b0d9202a 100644 --- a/drivers/serial/nwpserial.c +++ b/drivers/serial/nwpserial.c @@ -81,7 +81,7 @@ nwpserial_console_write(struct console *co, const char *s, unsigned int count) uart_console_write(&up->port, s, count, nwpserial_console_putchar); - /* wait for transmitter to become emtpy */ + /* wait for transmitter to become empty */ while ((dcr_read(up->dcr_host, UART_LSR) & UART_LSR_THRE) == 0) cpu_relax(); diff --git a/drivers/serial/sn_console.c b/drivers/serial/sn_console.c index 9794e0cd3dc..7e5e5efea4e 100644 --- a/drivers/serial/sn_console.c +++ b/drivers/serial/sn_console.c @@ -470,7 +470,7 @@ sn_receive_chars(struct sn_cons_port *port, unsigned long flags) } if (port->sc_port.state) { - /* The serial_core stuffs are initilized, use them */ + /* The serial_core stuffs are initialized, use them */ tty = port->sc_port.state->port.tty; } else { @@ -551,11 +551,11 @@ static void sn_transmit_chars(struct sn_cons_port *port, int raw) BUG_ON(!port->sc_is_asynch); if (port->sc_port.state) { - /* We're initilized, using serial core infrastructure */ + /* We're initialized, using serial core infrastructure */ xmit = &port->sc_port.state->xmit; } else { /* Probably sn_sal_switch_to_asynch has been run but serial core isn't - * initilized yet. Just return. Writes are going through + * initialized yet. Just return. Writes are going through * sn_sal_console_write (due to register_console) at this time. */ return; diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c index 681419d6856..251caa052ee 100644 --- a/drivers/staging/winbond/wbusb.c +++ b/drivers/staging/winbond/wbusb.c @@ -1,5 +1,5 @@ /* - * Copyright 2008 Pavel Machek <pavel@suse.cz> + * Copyright 2008 Pavel Machek <pavel@ucw.cz> * * Distribute under GPLv2. * diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 162c95a088e..89d260d6b03 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -2,7 +2,7 @@ * cdc-acm.c * * Copyright (c) 1999 Armin Fuerst <fuerst@in.tum.de> - * Copyright (c) 1999 Pavel Machek <pavel@suse.cz> + * Copyright (c) 1999 Pavel Machek <pavel@ucw.cz> * Copyright (c) 1999 Johannes Erdfelt <johannes@erdfelt.com> * Copyright (c) 2000 Vojtech Pavlik <vojtech@suse.cz> * Copyright (c) 2004 Oliver Neukum <oliver@neukum.name> diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 2250095db0a..84f9e52327f 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -2,7 +2,7 @@ * usblp.c * * Copyright (c) 1999 Michael Gee <michael@linuxspecific.com> - * Copyright (c) 1999 Pavel Machek <pavel@suse.cz> + * Copyright (c) 1999 Pavel Machek <pavel@ucw.cz> * Copyright (c) 2000 Randy Dunlap <rdunlap@xenotime.net> * Copyright (c) 2000 Vojtech Pavlik <vojtech@suse.cz> # Copyright (c) 2001 Pete Zaitcev <zaitcev@redhat.com> diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c index 4f2cbdcc027..a42ef380e91 100644 --- a/drivers/usb/host/fhci-sched.c +++ b/drivers/usb/host/fhci-sched.c @@ -125,7 +125,7 @@ void fhci_transaction_confirm(struct fhci_usb *usb, struct packet *pkt) /* * Flush all transmitted packets from BDs * This routine is called when disabling the USB port to flush all - * transmissions that are allready scheduled in the BDs + * transmissions that are already scheduled in the BDs */ void fhci_flush_all_transmissions(struct fhci_usb *usb) { diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index cdbe8bf7f67..e8a65ce45a2 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -261,7 +261,7 @@ static int klsi_105_startup(struct usb_serial *serial) spin_lock_init(&priv->lock); - /* priv->termios is left uninitalized until port opening */ + /* priv->termios is left uninitialized until port opening */ init_waitqueue_head(&serial->port[i]->write_wait); } diff --git a/drivers/usb/wusbcore/wusbhc.c b/drivers/usb/wusbcore/wusbhc.c index eab86e4bc77..2054d4ee977 100644 --- a/drivers/usb/wusbcore/wusbhc.c +++ b/drivers/usb/wusbcore/wusbhc.c @@ -26,7 +26,7 @@ * the one that requires (phase B, wusbhc_b_{create,destroy}). * * This is so because usb_add_hcd() will start the HC, and thus, all - * the HC specific stuff has to be already initialiazed (like sysfs + * the HC specific stuff has to be already initialized (like sysfs * thingies). */ #include <linux/device.h> diff --git a/drivers/uwb/wlp/wss-lc.c b/drivers/uwb/wlp/wss-lc.c index 90accdd54c0..a005d2a03b5 100644 --- a/drivers/uwb/wlp/wss-lc.c +++ b/drivers/uwb/wlp/wss-lc.c @@ -180,7 +180,7 @@ error_kobject_register: * If memory was allocated for the kobject's name then it will * be freed by the kobject system during this time. * - * The EDA cache is removed and reinitilized when the WSS is removed. We + * The EDA cache is removed and reinitialized when the WSS is removed. We * thus loose knowledge of members of this WSS at that time and need not do * it here. */ diff --git a/drivers/video/backlight/locomolcd.c b/drivers/video/backlight/locomolcd.c index 7571bc26071..d2f59015d51 100644 --- a/drivers/video/backlight/locomolcd.c +++ b/drivers/video/backlight/locomolcd.c @@ -2,7 +2,7 @@ * Backlight control code for Sharp Zaurus SL-5500 * * Copyright 2005 John Lenz <lenz@cs.wisc.edu> - * Maintainer: Pavel Machek <pavel@suse.cz> (unless John wants to :-) + * Maintainer: Pavel Machek <pavel@ucw.cz> (unless John wants to :-) * GPL v2 * * This driver assumes single CPU. That's okay, because collie is @@ -246,6 +246,6 @@ static void __exit locomolcd_exit(void) module_init(locomolcd_init); module_exit(locomolcd_exit); -MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>, Pavel Machek <pavel@suse.cz>"); +MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>, Pavel Machek <pavel@ucw.cz>"); MODULE_DESCRIPTION("Collie LCD driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/video/carminefb.c b/drivers/video/carminefb.c index d8345fcc4fe..6b19136aa18 100644 --- a/drivers/video/carminefb.c +++ b/drivers/video/carminefb.c @@ -432,7 +432,7 @@ static int init_hardware(struct carmine_hw *hw) u32 loops; u32 ret; - /* Initalize Carmine */ + /* Initialize Carmine */ /* Sets internal clock */ c_set_hw_reg(hw, CARMINE_CTL_REG + CARMINE_CTL_REG_CLOCK_ENABLE, CARMINE_DFLT_IP_CLOCK_ENABLE); diff --git a/drivers/video/tgafb.c b/drivers/video/tgafb.c index 1b3b1c718e8..aba7686b1a3 100644 --- a/drivers/video/tgafb.c +++ b/drivers/video/tgafb.c @@ -305,7 +305,7 @@ tgafb_set_par(struct fb_info *info) TGA_WRITE_REG(par, htimings, TGA_HORIZ_REG); TGA_WRITE_REG(par, vtimings, TGA_VERT_REG); - /* Initalise RAMDAC. */ + /* Initialise RAMDAC. */ if (tga_type == TGA_TYPE_8PLANE && tga_bus_pci) { /* Init BT485 RAMDAC registers. */ diff --git a/fs/Kconfig b/fs/Kconfig index 5f85b594761..3d185308ec8 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -64,7 +64,7 @@ source "fs/autofs4/Kconfig" source "fs/fuse/Kconfig" config CUSE - tristate "Character device in Userpace support" + tristate "Character device in Userspace support" depends on FUSE_FS help This FUSE extension allows character devices to be diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c index 34ddda888e6..dc39d282488 100644 --- a/fs/befs/linuxvfs.c +++ b/fs/befs/linuxvfs.c @@ -436,7 +436,7 @@ befs_init_inodecache(void) init_once); if (befs_inode_cachep == NULL) { printk(KERN_ERR "befs_init_inodecache: " - "Couldn't initalize inode slabcache\n"); + "Couldn't initialize inode slabcache\n"); return -ENOMEM; } diff --git a/fs/compat.c b/fs/compat.c index 6490d2134ff..c6fda9aeb86 100644 --- a/fs/compat.c +++ b/fs/compat.c @@ -8,7 +8,7 @@ * Copyright (C) 1997-2000 Jakub Jelinek (jakub@redhat.com) * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be) * Copyright (C) 2001,2002 Andi Kleen, SuSE Labs - * Copyright (C) 2003 Pavel Machek (pavel@suse.cz) + * Copyright (C) 2003 Pavel Machek (pavel@ucw.cz) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c index 641640dc7ae..5ead3763bba 100644 --- a/fs/compat_ioctl.c +++ b/fs/compat_ioctl.c @@ -4,7 +4,7 @@ * Copyright (C) 1997-2000 Jakub Jelinek (jakub@redhat.com) * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be) * Copyright (C) 2001,2002 Andi Kleen, SuSE Labs - * Copyright (C) 2003 Pavel Machek (pavel@suse.cz) + * Copyright (C) 2003 Pavel Machek (pavel@ucw.cz) * * These routines maintain argument size conversion between 32bit and 64bit * ioctls. diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c index 1cc087635a5..a2e3b562e65 100644 --- a/fs/ecryptfs/crypto.c +++ b/fs/ecryptfs/crypto.c @@ -762,7 +762,7 @@ ecryptfs_decrypt_page_offset(struct ecryptfs_crypt_stat *crypt_stat, /** * ecryptfs_init_crypt_ctx - * @crypt_stat: Uninitilized crypt stats structure + * @crypt_stat: Uninitialized crypt stats structure * * Initialize the crypto context. * diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 377309c1af6..bf029c7d551 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -2937,7 +2937,7 @@ fix_extent_len: * One of more index blocks maybe needed if the extent tree grow after * the unintialized extent split. To prevent ENOSPC occur at the IO * complete, we need to split the uninitialized extent before DIO submit - * the IO. The uninitilized extent called at this time will be split + * the IO. The uninitialized extent called at this time will be split * into three uninitialized extent(at most). After IO complete, the part * being filled will be convert to initialized by the end_io callback function * via ext4_convert_unwritten_extents(). diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index 12b3bc026a6..0e83dfd351d 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -2704,7 +2704,7 @@ void exit_ext4_mballoc(void) /* - * Check quota and mark choosed space (ac->ac_b_ex) non-free in bitmaps + * Check quota and mark chosen space (ac->ac_b_ex) non-free in bitmaps * Returns 0 if success or error code */ static noinline_for_stack int diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 4e8983a9811..e72d3235b2f 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -3010,7 +3010,7 @@ no_journal: ext4_ext_init(sb); err = ext4_mb_init(sb, needs_recovery); if (err) { - ext4_msg(sb, KERN_ERR, "failed to initalize mballoc (%d)", + ext4_msg(sb, KERN_ERR, "failed to initialize mballoc (%d)", err); goto failed_mount4; } diff --git a/fs/freevxfs/vxfs_super.c b/fs/freevxfs/vxfs_super.c index 1e8af939b3e..5132c99b1ca 100644 --- a/fs/freevxfs/vxfs_super.c +++ b/fs/freevxfs/vxfs_super.c @@ -135,7 +135,7 @@ static int vxfs_remount(struct super_block *sb, int *flags, char *data) } /** - * vxfs_read_super - read superblock into memory and initalize filesystem + * vxfs_read_super - read superblock into memory and initialize filesystem * @sbp: VFS superblock (to fill) * @dp: fs private mount data * @silent: do not complain loudly when sth is wrong diff --git a/fs/ncpfs/inode.c b/fs/ncpfs/inode.c index fa338515402..1e634deff94 100644 --- a/fs/ncpfs/inode.c +++ b/fs/ncpfs/inode.c @@ -728,8 +728,8 @@ out_fput: out_bdi: /* 23/12/1998 Marcin Dalecki <dalecki@cs.net.pl>: * - * The previously used put_filp(ncp_filp); was bogous, since - * it doesn't proper unlocking. + * The previously used put_filp(ncp_filp); was bogus, since + * it doesn't perform proper unlocking. */ fput(ncp_filp); out: diff --git a/fs/ocfs2/dlm/dlmdebug.c b/fs/ocfs2/dlm/dlmdebug.c index 0cd24cf5439..5efdd37dfe4 100644 --- a/fs/ocfs2/dlm/dlmdebug.c +++ b/fs/ocfs2/dlm/dlmdebug.c @@ -419,7 +419,7 @@ static loff_t debug_buffer_llseek(struct file *file, loff_t off, int whence) static int debug_buffer_release(struct inode *inode, struct file *file) { - struct debug_buffer *db = (struct debug_buffer *)file->private_data; + struct debug_buffer *db = file->private_data; if (db) kfree(db->buf); @@ -715,7 +715,7 @@ static int debug_lockres_open(struct inode *inode, struct file *file) goto bail; } - seq = (struct seq_file *) file->private_data; + seq = file->private_data; seq->private = dl; dlm_grab(dlm); @@ -731,7 +731,7 @@ bail: static int debug_lockres_release(struct inode *inode, struct file *file) { - struct seq_file *seq = (struct seq_file *)file->private_data; + struct seq_file *seq = file->private_data; struct debug_lockres *dl = (struct debug_lockres *)seq->private; if (dl->dl_res) diff --git a/fs/ocfs2/dlmfs/dlmfs.c b/fs/ocfs2/dlmfs/dlmfs.c index b83d6107a1f..bef34d0528d 100644 --- a/fs/ocfs2/dlmfs/dlmfs.c +++ b/fs/ocfs2/dlmfs/dlmfs.c @@ -182,8 +182,7 @@ static int dlmfs_file_release(struct inode *inode, { int level, status; struct dlmfs_inode_private *ip = DLMFS_I(inode); - struct dlmfs_filp_private *fp = - (struct dlmfs_filp_private *) file->private_data; + struct dlmfs_filp_private *fp = file->private_data; if (S_ISDIR(inode->i_mode)) BUG(); diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c index 39eb16ac5f9..5e02a893f46 100644 --- a/fs/ocfs2/dlmglue.c +++ b/fs/ocfs2/dlmglue.c @@ -2966,7 +2966,7 @@ static const struct seq_operations ocfs2_dlm_seq_ops = { static int ocfs2_dlm_debug_release(struct inode *inode, struct file *file) { - struct seq_file *seq = (struct seq_file *) file->private_data; + struct seq_file *seq = file->private_data; struct ocfs2_dlm_seq_priv *priv = seq->private; struct ocfs2_lock_res *res = &priv->p_iter_res; @@ -3000,7 +3000,7 @@ static int ocfs2_dlm_debug_open(struct inode *inode, struct file *file) goto out; } - seq = (struct seq_file *) file->private_data; + seq = file->private_data; seq->private = priv; ocfs2_add_lockres_tracking(&priv->p_iter_res, diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index 0eaa929a4db..03a799fdd74 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -2472,7 +2472,7 @@ static void ocfs2_delete_osb(struct ocfs2_super *osb) kfree(osb->slot_recovery_generations); /* FIXME * This belongs in journal shutdown, but because we have to - * allocate osb->journal at the start of ocfs2_initalize_osb(), + * allocate osb->journal at the start of ocfs2_initialize_osb(), * we free it here. */ kfree(osb->journal); diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c index 0f22fdaf54a..29db72203bd 100644 --- a/fs/reiserfs/inode.c +++ b/fs/reiserfs/inode.c @@ -1221,7 +1221,7 @@ static void init_inode(struct inode *inode, struct treepath *path) inode_set_bytes(inode, to_real_used_space(inode, inode->i_blocks, SD_V2_SIZE)); - /* read persistent inode attributes from sd and initalise + /* read persistent inode attributes from sd and initialise generic inode flags from them */ REISERFS_I(inode)->i_attrs = sd_v2_attrs(sd); sd_attrs_to_i_attrs(sd_v2_attrs(sd), inode); diff --git a/include/linux/fscache.h b/include/linux/fscache.h index 595ce49288b..ec0dad5ab90 100644 --- a/include/linux/fscache.h +++ b/include/linux/fscache.h @@ -85,7 +85,7 @@ struct fscache_cookie_def { /* get an index key * - should store the key data in the buffer - * - should return the amount of amount stored + * - should return the amount of data stored * - not permitted to return an error * - the netfs data from the cookie being used as the source is * presented @@ -454,6 +454,7 @@ int fscache_read_or_alloc_page(struct fscache_cookie *cookie, * @cookie: The cookie representing the cache object * @mapping: The netfs inode mapping to which the pages will be attached * @pages: A list of potential netfs pages to be filled + * @nr_pages: Number of pages to be read and/or allocated * @end_io_func: The callback to invoke when and if each page is filled * @context: An arbitrary piece of data to pass on to end_io_func() * @gfp: The conditions under which memory allocation should be made diff --git a/include/linux/ide.h b/include/linux/ide.h index 7b02aa5ce9b..072fe8c93e6 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -458,7 +458,7 @@ enum { IDE_DFLAG_DOORLOCKING = (1 << 15), /* disallow DMA */ IDE_DFLAG_NODMA = (1 << 16), - /* powermanagment told us not to do anything, so sleep nicely */ + /* powermanagement told us not to do anything, so sleep nicely */ IDE_DFLAG_BLOCKED = (1 << 17), /* sleeping & sleep field valid */ IDE_DFLAG_SLEEPING = (1 << 18), diff --git a/include/linux/if_link.h b/include/linux/if_link.h index 85c812db5a3..9d8f0807dae 100644 --- a/include/linux/if_link.h +++ b/include/linux/if_link.h @@ -233,7 +233,7 @@ enum macvlan_mode { MACVLAN_MODE_BRIDGE = 4, /* talk to bridge ports directly */ }; -/* SR-IOV virtual function managment section */ +/* SR-IOV virtual function management section */ enum { IFLA_VF_INFO_UNSPEC, diff --git a/include/linux/jffs2.h b/include/linux/jffs2.h index 0874ab59ffe..edb9231f189 100644 --- a/include/linux/jffs2.h +++ b/include/linux/jffs2.h @@ -185,7 +185,7 @@ struct jffs2_raw_xref jint32_t hdr_crc; jint32_t ino; /* inode number */ jint32_t xid; /* XATTR identifier number */ - jint32_t xseqno; /* xref sequencial number */ + jint32_t xseqno; /* xref sequential number */ jint32_t node_crc; } __attribute__((packed)); diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 8317ec4b9f3..bd8501a8ca1 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -728,12 +728,6 @@ extern int do_sysinfo(struct sysinfo *info); #endif /* __KERNEL__ */ -#ifndef __EXPORTED_HEADERS__ -#ifndef __KERNEL__ -#warning Attempt to use kernel headers from user space, see http://kernelnewbies.org/KernelHeaders -#endif /* __KERNEL__ */ -#endif /* __EXPORTED_HEADERS__ */ - #define SI_LOAD_SHIFT 16 struct sysinfo { long uptime; /* Seconds since boot */ diff --git a/include/linux/lru_cache.h b/include/linux/lru_cache.h index de48d167568..78fbf24f357 100644 --- a/include/linux/lru_cache.h +++ b/include/linux/lru_cache.h @@ -262,7 +262,7 @@ extern void lc_seq_dump_details(struct seq_file *seq, struct lru_cache *lc, char * @lc: the lru cache to operate on * * Note that the reference counts and order on the active and lru lists may - * still change. Returns true if we aquired the lock. + * still change. Returns true if we acquired the lock. */ static inline int lc_try_lock(struct lru_cache *lc) { diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index b21e4054c12..50d09aa6d21 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -775,7 +775,7 @@ struct net_device { /* * This is the first field of the "visible" part of this structure * (i.e. as seen by users in the "Space.c" file). It is the name - * the interface. + * of the interface. */ char name[IFNAMSIZ]; diff --git a/include/linux/reiserfs_fs.h b/include/linux/reiserfs_fs.h index 3b603f47418..ba394163dea 100644 --- a/include/linux/reiserfs_fs.h +++ b/include/linux/reiserfs_fs.h @@ -360,7 +360,7 @@ int is_reiserfs_jr(struct reiserfs_super_block *rs); /* the spot for the super in versions 3.5 - 3.5.10 (inclusive) */ #define REISERFS_OLD_DISK_OFFSET_IN_BYTES (8 * 1024) -// reiserfs internal error code (used by search_by_key adn fix_nodes)) +/* reiserfs internal error code (used by search_by_key and fix_nodes)) */ #define CARRY_ON 0 #define REPEAT_SEARCH -1 #define IO_ERROR -2 diff --git a/include/linux/types.h b/include/linux/types.h index 23d237a075e..331d8baabcf 100644 --- a/include/linux/types.h +++ b/include/linux/types.h @@ -8,7 +8,10 @@ #define DECLARE_BITMAP(name,bits) \ unsigned long name[BITS_TO_LONGS(bits)] - +#else +#ifndef __EXPORTED_HEADERS__ +#warning "Attempt to use kernel headers from user space, see http://kernelnewbies.org/KernelHeaders" +#endif /* __EXPORTED_HEADERS__ */ #endif #include <linux/posix_types.h> diff --git a/kernel/cpuset.c b/kernel/cpuset.c index 02b9611eadd..7cb37d86a00 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -105,7 +105,7 @@ struct cpuset { /* for custom sched domain */ int relax_domain_level; - /* used for walking a cpuset heirarchy */ + /* used for walking a cpuset hierarchy */ struct list_head stack_list; }; diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c index 8bc5eeffec8..51d14fe8764 100644 --- a/kernel/debug/debug_core.c +++ b/kernel/debug/debug_core.c @@ -6,7 +6,7 @@ * Copyright (C) 2000-2001 VERITAS Software Corporation. * Copyright (C) 2002-2004 Timesys Corporation * Copyright (C) 2003-2004 Amit S. Kale <amitkale@linsyssoft.com> - * Copyright (C) 2004 Pavel Machek <pavel@suse.cz> + * Copyright (C) 2004 Pavel Machek <pavel@ucw.cz> * Copyright (C) 2004-2006 Tom Rini <trini@kernel.crashing.org> * Copyright (C) 2004-2006 LinSysSoft Technologies Pvt. Ltd. * Copyright (C) 2005-2009 Wind River Systems, Inc. diff --git a/kernel/debug/gdbstub.c b/kernel/debug/gdbstub.c index e8fd6868682..6e81fd59566 100644 --- a/kernel/debug/gdbstub.c +++ b/kernel/debug/gdbstub.c @@ -6,7 +6,7 @@ * Copyright (C) 2000-2001 VERITAS Software Corporation. * Copyright (C) 2002-2004 Timesys Corporation * Copyright (C) 2003-2004 Amit S. Kale <amitkale@linsyssoft.com> - * Copyright (C) 2004 Pavel Machek <pavel@suse.cz> + * Copyright (C) 2004 Pavel Machek <pavel@ucw.cz> * Copyright (C) 2004-2006 Tom Rini <trini@kernel.crashing.org> * Copyright (C) 2004-2006 LinSysSoft Technologies Pvt. Ltd. * Copyright (C) 2005-2009 Wind River Systems, Inc. diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c index aa9e916da4d..6b202e7f8b5 100644 --- a/kernel/power/hibernate.c +++ b/kernel/power/hibernate.c @@ -3,7 +3,7 @@ * * Copyright (c) 2003 Patrick Mochel * Copyright (c) 2003 Open Source Development Lab - * Copyright (c) 2004 Pavel Machek <pavel@suse.cz> + * Copyright (c) 2004 Pavel Machek <pavel@ucw.cz> * Copyright (c) 2009 Rafael J. Wysocki, Novell Inc. * * This file is released under the GPLv2. diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c index 25ce010e9f8..f6cd6faf84f 100644 --- a/kernel/power/snapshot.c +++ b/kernel/power/snapshot.c @@ -3,7 +3,7 @@ * * This file provides system snapshot/restore functionality for swsusp. * - * Copyright (C) 1998-2005 Pavel Machek <pavel@suse.cz> + * Copyright (C) 1998-2005 Pavel Machek <pavel@ucw.cz> * Copyright (C) 2006 Rafael J. Wysocki <rjw@sisk.pl> * * This file is released under the GPLv2. diff --git a/kernel/power/swap.c b/kernel/power/swap.c index b0bb2177839..48a0aa9da16 100644 --- a/kernel/power/swap.c +++ b/kernel/power/swap.c @@ -4,7 +4,7 @@ * This file provides functions for reading the suspend image from * and writing it to a swap partition. * - * Copyright (C) 1998,2001-2005 Pavel Machek <pavel@suse.cz> + * Copyright (C) 1998,2001-2005 Pavel Machek <pavel@ucw.cz> * Copyright (C) 2006 Rafael J. Wysocki <rjw@sisk.pl> * * This file is released under the GPLv2. diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index b3bafd5fc66..48b2761b566 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -188,7 +188,7 @@ static void tick_handle_periodic_broadcast(struct clock_event_device *dev) /* * Setup the next period for devices, which do not have * periodic mode. We read dev->next_event first and add to it - * when the event alrady expired. clockevents_program_event() + * when the event already expired. clockevents_program_event() * sets dev->next_event only when the event is really * programmed to the device. */ diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index e722e9d6222..dfdc0347b05 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -937,7 +937,7 @@ config FAIL_MAKE_REQUEST Provide fault-injection capability for disk IO. config FAIL_IO_TIMEOUT - bool "Faul-injection capability for faking disk interrupts" + bool "Fault-injection capability for faking disk interrupts" depends on FAULT_INJECTION && BLOCK help Provide fault-injection capability on end IO handling. This diff --git a/lib/devres.c b/lib/devres.c index 49368608f98..6efddf53b90 100644 --- a/lib/devres.c +++ b/lib/devres.c @@ -328,7 +328,7 @@ EXPORT_SYMBOL(pcim_iomap_regions_request_all); * @pdev: PCI device to map IO resources for * @mask: Mask of BARs to unmap and release * - * Unamp and release regions specified by @mask. + * Unmap and release regions specified by @mask. */ void pcim_iounmap_regions(struct pci_dev *pdev, u16 mask) { diff --git a/lib/random32.c b/lib/random32.c index 870dc3fc0f0..fc3545a3277 100644 --- a/lib/random32.c +++ b/lib/random32.c @@ -127,7 +127,7 @@ core_initcall(random32_init); /* * Generate better values after random number generator - * is fully initalized. + * is fully initialized. */ static int __init random32_reseed(void) { diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c index 6fb890187de..4dc8805154e 100644 --- a/net/ipv6/netfilter/nf_conntrack_reasm.c +++ b/net/ipv6/netfilter/nf_conntrack_reasm.c @@ -201,7 +201,7 @@ static int nf_ct_frag6_queue(struct nf_ct_frag6_queue *fq, struct sk_buff *skb, int offset, end; if (fq->q.last_in & INET_FRAG_COMPLETE) { - pr_debug("Allready completed\n"); + pr_debug("Already completed\n"); goto err; } diff --git a/net/netfilter/ipvs/ip_vs_lblc.c b/net/netfilter/ipvs/ip_vs_lblc.c index 94a45213faa..9323f894419 100644 --- a/net/netfilter/ipvs/ip_vs_lblc.c +++ b/net/netfilter/ipvs/ip_vs_lblc.c @@ -11,7 +11,7 @@ * Changes: * Martin Hamilton : fixed the terrible locking bugs * *lock(tbl->lock) ==> *lock(&tbl->lock) - * Wensong Zhang : fixed the uninitilized tbl->lock bug + * Wensong Zhang : fixed the uninitialized tbl->lock bug * Wensong Zhang : added doing full expiration check to * collect stale entries of 24+ hours when * no partial expire check in a half hour diff --git a/net/netfilter/ipvs/ip_vs_lblcr.c b/net/netfilter/ipvs/ip_vs_lblcr.c index 535dc2b419d..dbeed8ea421 100644 --- a/net/netfilter/ipvs/ip_vs_lblcr.c +++ b/net/netfilter/ipvs/ip_vs_lblcr.c @@ -386,7 +386,7 @@ ip_vs_lblcr_new(struct ip_vs_lblcr_table *tbl, const union nf_inet_addr *daddr, ip_vs_addr_copy(dest->af, &en->addr, daddr); en->lastuse = jiffies; - /* initilize its dest set */ + /* initialize its dest set */ atomic_set(&(en->set.size), 0); INIT_LIST_HEAD(&en->set.list); rwlock_init(&en->set.lock); diff --git a/net/sctp/associola.c b/net/sctp/associola.c index e41feff19e4..0b85e525643 100644 --- a/net/sctp/associola.c +++ b/net/sctp/associola.c @@ -172,7 +172,7 @@ static struct sctp_association *sctp_association_init(struct sctp_association *a asoc->timeouts[SCTP_EVENT_TIMEOUT_AUTOCLOSE] = (unsigned long)sp->autoclose * HZ; - /* Initilizes the timers */ + /* Initializes the timers */ for (i = SCTP_EVENT_TIMEOUT_NONE; i < SCTP_NUM_TIMEOUT_TYPES; ++i) setup_timer(&asoc->timers[i], sctp_timer_events[i], (unsigned long)asoc); diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c index 182749867c7..0f41b05bd4d 100644 --- a/net/sctp/protocol.c +++ b/net/sctp/protocol.c @@ -1162,7 +1162,7 @@ SCTP_STATIC __init int sctp_init(void) /* Set the pressure threshold to be a fraction of global memory that * is up to 1/2 at 256 MB, decreasing toward zero with the amount of * memory, with a floor of 128 pages. - * Note this initalizes the data in sctpv6_prot too + * Note this initializes the data in sctpv6_prot too * Unabashedly stolen from tcp_init */ nr_pages = totalram_pages - totalhigh_pages; diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c index 0f2fc480fc6..276bdc7325e 100644 --- a/security/smack/smack_lsm.c +++ b/security/smack/smack_lsm.c @@ -3227,7 +3227,7 @@ static __init int smack_init(void) cred = (struct cred *) current->cred; cred->security = &smack_known_floor.smk_known; - /* initilize the smack_know_list */ + /* initialize the smack_know_list */ init_smack_know_list(); /* * Initialize locks diff --git a/sound/drivers/Kconfig b/sound/drivers/Kconfig index 84714a65e5c..c290cee4cee 100644 --- a/sound/drivers/Kconfig +++ b/sound/drivers/Kconfig @@ -155,7 +155,7 @@ config SND_ML403_AC97CR select SND_AC97_CODEC help Say Y here to include support for the - opb_ac97_controller_ref_v1_00_a ip core found in Xilinx' ML403 + opb_ac97_controller_ref_v1_00_a ip core found in Xilinx's ML403 reference design. To compile this driver as a module, choose M here: the module diff --git a/sound/pci/trident/trident_main.c b/sound/pci/trident/trident_main.c index 6d943f6f6b7..2870a4fdc13 100644 --- a/sound/pci/trident/trident_main.c +++ b/sound/pci/trident/trident_main.c @@ -1055,7 +1055,7 @@ static int snd_trident_capture_prepare(struct snd_pcm_substream *substream) spin_lock_irq(&trident->reg_lock); - // Initilize the channel and set channel Mode + // Initialize the channel and set channel Mode outb(0, TRID_REG(trident, LEGACY_DMAR15)); // Set DMA channel operation mode register diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c index 6a2764ee820..3a501062c24 100644 --- a/sound/soc/fsl/mpc8610_hpcd.c +++ b/sound/soc/fsl/mpc8610_hpcd.c @@ -46,7 +46,7 @@ struct mpc8610_hpcd_data { }; /** - * mpc8610_hpcd_machine_probe: initalize the board + * mpc8610_hpcd_machine_probe: initialize the board * * This function is called when platform_device_add() is called. It is used * to initialize the board-specific hardware. diff --git a/sound/soc/imx/imx-ssi.c b/sound/soc/imx/imx-ssi.c index 80b4fee2442..4fd13d0791b 100644 --- a/sound/soc/imx/imx-ssi.c +++ b/sound/soc/imx/imx-ssi.c @@ -23,7 +23,7 @@ * between pcm data and GPIO status data changes. Our FIQ handler is not * able to handle this, hence this driver only works with 48000Hz sampling * rate. - * Reading and writing AC97 registers is another challange. The core + * Reading and writing AC97 registers is another challenge. The core * provides us status bits when the read register is updated with *another* * value. When we read the same register two times (and the register still * contains the same value) these status bits are not set. We work diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 998569d6033..e048e091009 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1307,7 +1307,7 @@ cpu_dai_err: } /* - * Attempt to initialise any uninitalised cards. Must be called with + * Attempt to initialise any uninitialised cards. Must be called with * client_mutex. */ static void snd_soc_instantiate_cards(void) diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index 456829882f4..3634cedf930 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -636,7 +636,7 @@ static int hw_rule_period_time(struct snd_pcm_hw_params *params, min_datainterval = min(min_datainterval, fp->datainterval); } if (min_datainterval == 0xff) { - hwc_debug(" --> get emtpy\n"); + hwc_debug(" --> get empty\n"); it->empty = 1; return -EINVAL; } |