diff options
| -rw-r--r-- | drivers/block/mg_disk.c | 186 | ||||
| -rw-r--r-- | include/linux/mg_disk.h | 206 |
2 files changed, 185 insertions, 207 deletions
diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c index 2c00ad90cd6..2c6127ee834 100644 --- a/drivers/block/mg_disk.c +++ b/drivers/block/mg_disk.c @@ -22,10 +22,194 @@ #include <linux/delay.h> #include <linux/platform_device.h> #include <linux/gpio.h> -#include <linux/mg_disk.h> #define MG_RES_SEC (CONFIG_MG_DISK_RES << 1) +/* name for block device */ +#define MG_DISK_NAME "mgd" +/* name for platform device */ +#define MG_DEV_NAME "mg_disk" + +#define MG_DISK_MAJ 0 +#define MG_DISK_MAX_PART 16 +#define MG_SECTOR_SIZE 512 +#define MG_MAX_SECTS 256 + +/* Register offsets */ +#define MG_BUFF_OFFSET 0x8000 +#define MG_STORAGE_BUFFER_SIZE 0x200 +#define MG_REG_OFFSET 0xC000 +#define MG_REG_FEATURE (MG_REG_OFFSET + 2) /* write case */ +#define MG_REG_ERROR (MG_REG_OFFSET + 2) /* read case */ +#define MG_REG_SECT_CNT (MG_REG_OFFSET + 4) +#define MG_REG_SECT_NUM (MG_REG_OFFSET + 6) +#define MG_REG_CYL_LOW (MG_REG_OFFSET + 8) +#define MG_REG_CYL_HIGH (MG_REG_OFFSET + 0xA) +#define MG_REG_DRV_HEAD (MG_REG_OFFSET + 0xC) +#define MG_REG_COMMAND (MG_REG_OFFSET + 0xE) /* write case */ +#define MG_REG_STATUS (MG_REG_OFFSET + 0xE) /* read case */ +#define MG_REG_DRV_CTRL (MG_REG_OFFSET + 0x10) +#define MG_REG_BURST_CTRL (MG_REG_OFFSET + 0x12) + +/* "Drive Select/Head Register" bit values */ +#define MG_REG_HEAD_MUST_BE_ON 0xA0 /* These 2 bits are always on */ +#define MG_REG_HEAD_DRIVE_MASTER (0x00 | MG_REG_HEAD_MUST_BE_ON) +#define MG_REG_HEAD_DRIVE_SLAVE (0x10 | MG_REG_HEAD_MUST_BE_ON) +#define MG_REG_HEAD_LBA_MODE (0x40 | MG_REG_HEAD_MUST_BE_ON) + + +/* "Device Control Register" bit values */ +#define MG_REG_CTRL_INTR_ENABLE 0x0 +#define MG_REG_CTRL_INTR_DISABLE (0x1<<1) +#define MG_REG_CTRL_RESET (0x1<<2) +#define MG_REG_CTRL_INTR_POLA_ACTIVE_HIGH 0x0 +#define MG_REG_CTRL_INTR_POLA_ACTIVE_LOW (0x1<<4) +#define MG_REG_CTRL_DPD_POLA_ACTIVE_LOW 0x0 +#define MG_REG_CTRL_DPD_POLA_ACTIVE_HIGH (0x1<<5) +#define MG_REG_CTRL_DPD_DISABLE 0x0 +#define MG_REG_CTRL_DPD_ENABLE (0x1<<6) + +/* Status register bit */ +/* error bit in status register */ +#define MG_REG_STATUS_BIT_ERROR 0x01 +/* corrected error in status register */ +#define MG_REG_STATUS_BIT_CORRECTED_ERROR 0x04 +/* data request bit in status register */ +#define MG_REG_STATUS_BIT_DATA_REQ 0x08 +/* DSC - Drive Seek Complete */ +#define MG_REG_STATUS_BIT_SEEK_DONE 0x10 +/* DWF - Drive Write Fault */ +#define MG_REG_STATUS_BIT_WRITE_FAULT 0x20 +#define MG_REG_STATUS_BIT_READY 0x40 +#define MG_REG_STATUS_BIT_BUSY 0x80 + +/* handy status */ +#define MG_STAT_READY (MG_REG_STATUS_BIT_READY | MG_REG_STATUS_BIT_SEEK_DONE) +#define MG_READY_OK(s) (((s) & (MG_STAT_READY | \ + (MG_REG_STATUS_BIT_BUSY | \ + MG_REG_STATUS_BIT_WRITE_FAULT | \ + MG_REG_STATUS_BIT_ERROR))) == MG_STAT_READY) + +/* Error register */ +#define MG_REG_ERR_AMNF 0x01 +#define MG_REG_ERR_ABRT 0x04 +#define MG_REG_ERR_IDNF 0x10 +#define MG_REG_ERR_UNC 0x40 +#define MG_REG_ERR_BBK 0x80 + +/* error code for others */ +#define MG_ERR_NONE 0 +#define MG_ERR_TIMEOUT 0x100 +#define MG_ERR_INIT_STAT 0x101 +#define MG_ERR_TRANSLATION 0x102 +#define MG_ERR_CTRL_RST 0x103 +#define MG_ERR_INV_STAT 0x104 +#define MG_ERR_RSTOUT 0x105 + +#define MG_MAX_ERRORS 6 /* Max read/write errors */ + +/* command */ +#define MG_CMD_RD 0x20 +#define MG_CMD_WR 0x30 +#define MG_CMD_SLEEP 0x99 +#define MG_CMD_WAKEUP 0xC3 +#define MG_CMD_ID 0xEC +#define MG_CMD_WR_CONF 0x3C +#define MG_CMD_RD_CONF 0x40 + +/* operation mode */ +#define MG_OP_CASCADE (1 << 0) +#define MG_OP_CASCADE_SYNC_RD (1 << 1) +#define MG_OP_CASCADE_SYNC_WR (1 << 2) +#define MG_OP_INTERLEAVE (1 << 3) + +/* synchronous */ +#define MG_BURST_LAT_4 (3 << 4) +#define MG_BURST_LAT_5 (4 << 4) +#define MG_BURST_LAT_6 (5 << 4) +#define MG_BURST_LAT_7 (6 << 4) +#define MG_BURST_LAT_8 (7 << 4) +#define MG_BURST_LEN_4 (1 << 1) +#define MG_BURST_LEN_8 (2 << 1) +#define MG_BURST_LEN_16 (3 << 1) +#define MG_BURST_LEN_32 (4 << 1) +#define MG_BURST_LEN_CONT (0 << 1) + +/* timeout value (unit: ms) */ +#define MG_TMAX_CONF_TO_CMD 1 +#define MG_TMAX_WAIT_RD_DRQ 10 +#define MG_TMAX_WAIT_WR_DRQ 500 +#define MG_TMAX_RST_TO_BUSY 10 +#define MG_TMAX_HDRST_TO_RDY 500 +#define MG_TMAX_SWRST_TO_RDY 500 +#define MG_TMAX_RSTOUT 3000 + +/* device attribution */ +/* use mflash as boot device */ +#define MG_BOOT_DEV (1 << 0) +/* use mflash as storage device */ +#define MG_STORAGE_DEV (1 << 1) +/* same as MG_STORAGE_DEV, but bootloader already done reset sequence */ +#define MG_STORAGE_DEV_SKIP_RST (1 << 2) + +#define MG_DEV_MASK (MG_BOOT_DEV | MG_STORAGE_DEV | MG_STORAGE_DEV_SKIP_RST) + +/* names of GPIO resource */ +#define MG_RST_PIN "mg_rst" +/* except MG_BOOT_DEV, reset-out pin should be assigned */ +#define MG_RSTOUT_PIN "mg_rstout" + +/* private driver data */ +struct mg_drv_data { + /* disk resource */ + u32 use_polling; + + /* device attribution */ + u32 dev_attr; + + /* internally used */ + struct mg_host *host; +}; + +/* main structure for mflash driver */ +struct mg_host { + struct device *dev; + + struct request_queue *breq; + spinlock_t lock; + struct gendisk *gd; + + struct timer_list timer; + void (*mg_do_intr) (struct mg_host *); + + u16 id[ATA_ID_WORDS]; + + u16 cyls; + u16 heads; + u16 sectors; + u32 n_sectors; + u32 nres_sectors; + + void __iomem *dev_base; + unsigned int irq; + unsigned int rst; + unsigned int rstout; + + u32 major; + u32 error; +}; + +/* + * Debugging macro and defines + */ +#undef DO_MG_DEBUG +#ifdef DO_MG_DEBUG +# define MG_DBG(fmt, args...) \ + printk(KERN_DEBUG "%s:%d "fmt, __func__, __LINE__, ##args) +#else /* CONFIG_MG_DEBUG */ +# define MG_DBG(fmt, args...) do { } while (0) +#endif /* CONFIG_MG_DEBUG */ + static void mg_request(struct request_queue *); static void mg_dump_status(const char *msg, unsigned int stat, diff --git a/include/linux/mg_disk.h b/include/linux/mg_disk.h deleted file mode 100644 index 1f76b1ebf62..00000000000 --- a/include/linux/mg_disk.h +++ /dev/null @@ -1,206 +0,0 @@ -/* - * include/linux/mg_disk.c - * - * Support for the mGine m[g]flash IO mode. - * Based on legacy hd.c - * - * (c) 2008 mGine Co.,LTD - * (c) 2008 unsik Kim <donari75@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __MG_DISK_H__ -#define __MG_DISK_H__ - -#include <linux/blkdev.h> -#include <linux/ata.h> - -/* name for block device */ -#define MG_DISK_NAME "mgd" -/* name for platform device */ -#define MG_DEV_NAME "mg_disk" - -#define MG_DISK_MAJ 0 -#define MG_DISK_MAX_PART 16 -#define MG_SECTOR_SIZE 512 -#define MG_MAX_SECTS 256 - -/* Register offsets */ -#define MG_BUFF_OFFSET 0x8000 -#define MG_STORAGE_BUFFER_SIZE 0x200 -#define MG_REG_OFFSET 0xC000 -#define MG_REG_FEATURE (MG_REG_OFFSET + 2) /* write case */ -#define MG_REG_ERROR (MG_REG_OFFSET + 2) /* read case */ -#define MG_REG_SECT_CNT (MG_REG_OFFSET + 4) -#define MG_REG_SECT_NUM (MG_REG_OFFSET + 6) -#define MG_REG_CYL_LOW (MG_REG_OFFSET + 8) -#define MG_REG_CYL_HIGH (MG_REG_OFFSET + 0xA) -#define MG_REG_DRV_HEAD (MG_REG_OFFSET + 0xC) -#define MG_REG_COMMAND (MG_REG_OFFSET + 0xE) /* write case */ -#define MG_REG_STATUS (MG_REG_OFFSET + 0xE) /* read case */ -#define MG_REG_DRV_CTRL (MG_REG_OFFSET + 0x10) -#define MG_REG_BURST_CTRL (MG_REG_OFFSET + 0x12) - -/* "Drive Select/Head Register" bit values */ -#define MG_REG_HEAD_MUST_BE_ON 0xA0 /* These 2 bits are always on */ -#define MG_REG_HEAD_DRIVE_MASTER (0x00 | MG_REG_HEAD_MUST_BE_ON) -#define MG_REG_HEAD_DRIVE_SLAVE (0x10 | MG_REG_HEAD_MUST_BE_ON) -#define MG_REG_HEAD_LBA_MODE (0x40 | MG_REG_HEAD_MUST_BE_ON) - - -/* "Device Control Register" bit values */ -#define MG_REG_CTRL_INTR_ENABLE 0x0 -#define MG_REG_CTRL_INTR_DISABLE (0x1<<1) -#define MG_REG_CTRL_RESET (0x1<<2) -#define MG_REG_CTRL_INTR_POLA_ACTIVE_HIGH 0x0 -#define MG_REG_CTRL_INTR_POLA_ACTIVE_LOW (0x1<<4) -#define MG_REG_CTRL_DPD_POLA_ACTIVE_LOW 0x0 -#define MG_REG_CTRL_DPD_POLA_ACTIVE_HIGH (0x1<<5) -#define MG_REG_CTRL_DPD_DISABLE 0x0 -#define MG_REG_CTRL_DPD_ENABLE (0x1<<6) - -/* Status register bit */ -/* error bit in status register */ -#define MG_REG_STATUS_BIT_ERROR 0x01 -/* corrected error in status register */ -#define MG_REG_STATUS_BIT_CORRECTED_ERROR 0x04 -/* data request bit in status register */ -#define MG_REG_STATUS_BIT_DATA_REQ 0x08 -/* DSC - Drive Seek Complete */ -#define MG_REG_STATUS_BIT_SEEK_DONE 0x10 -/* DWF - Drive Write Fault */ -#define MG_REG_STATUS_BIT_WRITE_FAULT 0x20 -#define MG_REG_STATUS_BIT_READY 0x40 -#define MG_REG_STATUS_BIT_BUSY 0x80 - -/* handy status */ -#define MG_STAT_READY (MG_REG_STATUS_BIT_READY | MG_REG_STATUS_BIT_SEEK_DONE) -#define MG_READY_OK(s) (((s) & (MG_STAT_READY | \ - (MG_REG_STATUS_BIT_BUSY | \ - MG_REG_STATUS_BIT_WRITE_FAULT | \ - MG_REG_STATUS_BIT_ERROR))) == MG_STAT_READY) - -/* Error register */ -#define MG_REG_ERR_AMNF 0x01 -#define MG_REG_ERR_ABRT 0x04 -#define MG_REG_ERR_IDNF 0x10 -#define MG_REG_ERR_UNC 0x40 -#define MG_REG_ERR_BBK 0x80 - -/* error code for others */ -#define MG_ERR_NONE 0 -#define MG_ERR_TIMEOUT 0x100 -#define MG_ERR_INIT_STAT 0x101 -#define MG_ERR_TRANSLATION 0x102 -#define MG_ERR_CTRL_RST 0x103 -#define MG_ERR_INV_STAT 0x104 -#define MG_ERR_RSTOUT 0x105 - -#define MG_MAX_ERRORS 6 /* Max read/write errors */ - -/* command */ -#define MG_CMD_RD 0x20 -#define MG_CMD_WR 0x30 -#define MG_CMD_SLEEP 0x99 -#define MG_CMD_WAKEUP 0xC3 -#define MG_CMD_ID 0xEC -#define MG_CMD_WR_CONF 0x3C -#define MG_CMD_RD_CONF 0x40 - -/* operation mode */ -#define MG_OP_CASCADE (1 << 0) -#define MG_OP_CASCADE_SYNC_RD (1 << 1) -#define MG_OP_CASCADE_SYNC_WR (1 << 2) -#define MG_OP_INTERLEAVE (1 << 3) - -/* synchronous */ -#define MG_BURST_LAT_4 (3 << 4) -#define MG_BURST_LAT_5 (4 << 4) -#define MG_BURST_LAT_6 (5 << 4) -#define MG_BURST_LAT_7 (6 << 4) -#define MG_BURST_LAT_8 (7 << 4) -#define MG_BURST_LEN_4 (1 << 1) -#define MG_BURST_LEN_8 (2 << 1) -#define MG_BURST_LEN_16 (3 << 1) -#define MG_BURST_LEN_32 (4 << 1) -#define MG_BURST_LEN_CONT (0 << 1) - -/* timeout value (unit: ms) */ -#define MG_TMAX_CONF_TO_CMD 1 -#define MG_TMAX_WAIT_RD_DRQ 10 -#define MG_TMAX_WAIT_WR_DRQ 500 -#define MG_TMAX_RST_TO_BUSY 10 -#define MG_TMAX_HDRST_TO_RDY 500 -#define MG_TMAX_SWRST_TO_RDY 500 -#define MG_TMAX_RSTOUT 3000 - -/* device attribution */ -/* use mflash as boot device */ -#define MG_BOOT_DEV (1 << 0) -/* use mflash as storage device */ -#define MG_STORAGE_DEV (1 << 1) -/* same as MG_STORAGE_DEV, but bootloader already done reset sequence */ -#define MG_STORAGE_DEV_SKIP_RST (1 << 2) - -#define MG_DEV_MASK (MG_BOOT_DEV | MG_STORAGE_DEV | MG_STORAGE_DEV_SKIP_RST) - -/* names of GPIO resource */ -#define MG_RST_PIN "mg_rst" -/* except MG_BOOT_DEV, reset-out pin should be assigned */ -#define MG_RSTOUT_PIN "mg_rstout" - -/* private driver data */ -struct mg_drv_data { - /* disk resource */ - u32 use_polling; - - /* device attribution */ - u32 dev_attr; - - /* internally used */ - struct mg_host *host; -}; - -/* main structure for mflash driver */ -struct mg_host { - struct device *dev; - - struct request_queue *breq; - spinlock_t lock; - struct gendisk *gd; - - struct timer_list timer; - void (*mg_do_intr) (struct mg_host *); - - u16 id[ATA_ID_WORDS]; - - u16 cyls; - u16 heads; - u16 sectors; - u32 n_sectors; - u32 nres_sectors; - - void __iomem *dev_base; - unsigned int irq; - unsigned int rst; - unsigned int rstout; - - u32 major; - u32 error; -}; - -/* - * Debugging macro and defines - */ -#undef DO_MG_DEBUG -#ifdef DO_MG_DEBUG -# define MG_DBG(fmt, args...) \ - printk(KERN_DEBUG "%s:%d "fmt, __func__, __LINE__, ##args) -#else /* CONFIG_MG_DEBUG */ -# define MG_DBG(fmt, args...) do { } while (0) -#endif /* CONFIG_MG_DEBUG */ - -#endif |