diff options
| -rw-r--r-- | drivers/gpu/drm/i915/intel_crt.c | 95 |
1 files changed, 57 insertions, 38 deletions
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index e38bc676918..8df57431606 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -34,8 +34,17 @@ #include "i915_drm.h" #include "i915_drv.h" +/* Here's the desired hotplug mode */ +#define ADPA_HOTPLUG_BITS (ADPA_CRT_HOTPLUG_PERIOD_128 | \ + ADPA_CRT_HOTPLUG_WARMUP_10MS | \ + ADPA_CRT_HOTPLUG_SAMPLE_4S | \ + ADPA_CRT_HOTPLUG_VOLTAGE_50 | \ + ADPA_CRT_HOTPLUG_VOLREF_325MV | \ + ADPA_CRT_HOTPLUG_ENABLE) + struct intel_crt { struct intel_encoder base; + bool force_hotplug_required; }; static struct intel_crt *intel_attached_crt(struct drm_connector *connector) @@ -139,7 +148,7 @@ static void intel_crt_mode_set(struct drm_encoder *encoder, dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK); } - adpa = 0; + adpa = ADPA_HOTPLUG_BITS; if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) adpa |= ADPA_HSYNC_ACTIVE_HIGH; if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) @@ -167,53 +176,44 @@ static void intel_crt_mode_set(struct drm_encoder *encoder, static bool intel_ironlake_crt_detect_hotplug(struct drm_connector *connector) { struct drm_device *dev = connector->dev; + struct intel_crt *crt = intel_attached_crt(connector); struct drm_i915_private *dev_priv = dev->dev_private; - u32 adpa, temp; + u32 adpa; bool ret; - bool turn_off_dac = false; - temp = adpa = I915_READ(PCH_ADPA); + /* The first time through, trigger an explicit detection cycle */ + if (crt->force_hotplug_required) { + bool turn_off_dac = HAS_PCH_SPLIT(dev); + u32 save_adpa; - if (HAS_PCH_SPLIT(dev)) - turn_off_dac = true; - - adpa &= ~ADPA_CRT_HOTPLUG_MASK; - if (turn_off_dac) - adpa &= ~ADPA_DAC_ENABLE; - - /* disable HPD first */ - I915_WRITE(PCH_ADPA, adpa); - (void)I915_READ(PCH_ADPA); - - adpa |= (ADPA_CRT_HOTPLUG_PERIOD_128 | - ADPA_CRT_HOTPLUG_WARMUP_10MS | - ADPA_CRT_HOTPLUG_SAMPLE_4S | - ADPA_CRT_HOTPLUG_VOLTAGE_50 | /* default */ - ADPA_CRT_HOTPLUG_VOLREF_325MV | - ADPA_CRT_HOTPLUG_ENABLE | - ADPA_CRT_HOTPLUG_FORCE_TRIGGER); - - DRM_DEBUG_KMS("pch crt adpa 0x%x", adpa); - I915_WRITE(PCH_ADPA, adpa); - - if (wait_for((I915_READ(PCH_ADPA) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0, - 1000)) - DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER"); - - if (turn_off_dac) { - /* Make sure hotplug is enabled */ - I915_WRITE(PCH_ADPA, temp | ADPA_CRT_HOTPLUG_ENABLE); - (void)I915_READ(PCH_ADPA); + crt->force_hotplug_required = 0; + + save_adpa = adpa = I915_READ(PCH_ADPA); + DRM_DEBUG_KMS("trigger hotplug detect cycle: adpa=0x%x\n", adpa); + + adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER; + if (turn_off_dac) + adpa &= ~ADPA_DAC_ENABLE; + + I915_WRITE(PCH_ADPA, adpa); + + if (wait_for((I915_READ(PCH_ADPA) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0, + 1000)) + DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER"); + + if (turn_off_dac) { + I915_WRITE(PCH_ADPA, save_adpa); + POSTING_READ(PCH_ADPA); + } } /* Check the status to see if both blue and green are on now */ adpa = I915_READ(PCH_ADPA); - adpa &= ADPA_CRT_HOTPLUG_MONITOR_MASK; - if ((adpa == ADPA_CRT_HOTPLUG_MONITOR_COLOR) || - (adpa == ADPA_CRT_HOTPLUG_MONITOR_MONO)) + if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0) ret = true; else ret = false; + DRM_DEBUG_KMS("ironlake hotplug adpa=0x%x, result %d\n", adpa, ret); return ret; } @@ -452,8 +452,10 @@ intel_crt_detect(struct drm_connector *connector, bool force) if (intel_crt_detect_hotplug(connector)) { DRM_DEBUG_KMS("CRT detected via hotplug\n"); return connector_status_connected; - } else + } else { + DRM_DEBUG_KMS("CRT not detected via hotplug\n"); return connector_status_disconnected; + } } if (intel_crt_detect_ddc(crt)) @@ -587,5 +589,22 @@ void intel_crt_init(struct drm_device *dev) else connector->polled = DRM_CONNECTOR_POLL_CONNECT; + /* + * Configure the automatic hotplug detection stuff + */ + crt->force_hotplug_required = 0; + if (HAS_PCH_SPLIT(dev)) { + u32 adpa; + + adpa = I915_READ(PCH_ADPA); + adpa &= ~ADPA_CRT_HOTPLUG_MASK; + adpa |= ADPA_HOTPLUG_BITS; + I915_WRITE(PCH_ADPA, adpa); + POSTING_READ(PCH_ADPA); + + DRM_DEBUG_KMS("pch crt adpa set to 0x%x\n", adpa); + crt->force_hotplug_required = 1; + } + dev_priv->hotplug_supported_mask |= CRT_HOTPLUG_INT_STATUS; } |