summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/net/wireless/iwlwifi/Kconfig19
-rw-r--r--drivers/net/wireless/iwlwifi/Makefile1
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-4965-commands.h8
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-4965.c870
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-4965.h68
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-calib.c778
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-calib.h104
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-core.h7
-rw-r--r--drivers/net/wireless/iwlwifi/iwl4965-base.c18
9 files changed, 1054 insertions, 819 deletions
diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig
index d5b7a76fcaa..a5fdd0f21a7 100644
--- a/drivers/net/wireless/iwlwifi/Kconfig
+++ b/drivers/net/wireless/iwlwifi/Kconfig
@@ -15,6 +15,15 @@ config IWLWIFI_LEDS
bool
default n
+config IWLWIFI_RUN_TIME_CALIB
+ bool
+ depends on IWLCORE
+ default n
+ ---help---
+ This option will enable run time calibration for the iwlwifi driver.
+ These calibrations are Sensitivity and Chain Noise.
+
+
config IWLWIFI_RFKILL
boolean "IWLWIFI RF kill support"
depends on IWLCORE
@@ -68,12 +77,14 @@ config IWL4965_SPECTRUM_MEASUREMENT
---help---
This option will enable spectrum measurement for the iwl4965 driver.
-config IWL4965_SENSITIVITY
- bool "Enable Sensitivity Calibration in iwl4965 driver"
+config IWL4965_RUN_TIME_CALIB
+ bool "Enable run time Calibration for 4965 NIC"
+ select IWLWIFI_RUN_TIME_CALIB
depends on IWL4965
+ default y
---help---
- This option will enable sensitivity calibration for the iwl4965
- driver.
+ This option will enable run time calibration for the iwl4965 driver.
+ These calibrations are Sensitivity and Chain Noise. If unsure, say yes
config IWLWIFI_DEBUG
bool "Enable full debugging output in iwl4965 driver"
diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile
index ec6187b75c3..7bc569be4ba 100644
--- a/drivers/net/wireless/iwlwifi/Makefile
+++ b/drivers/net/wireless/iwlwifi/Makefile
@@ -3,6 +3,7 @@ iwlcore-objs := iwl-core.o iwl-eeprom.o iwl-hcmd.o
iwlcore-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-debugfs.o
iwlcore-$(CONFIG_IWLWIFI_LEDS) += iwl-led.o
iwlcore-$(CONFIG_IWLWIFI_RFKILL) += iwl-rfkill.o
+iwlcore-$(CONFIG_IWLWIFI_RUN_TIME_CALIB) += iwl-calib.o
obj-$(CONFIG_IWL3945) += iwl3945.o
iwl3945-objs := iwl3945-base.o iwl-3945.o iwl-3945-rs.o
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-commands.h b/drivers/net/wireless/iwlwifi/iwl-4965-commands.h
index 3bcd107e2d7..c03c04fe14c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-4965-commands.h
@@ -2559,7 +2559,7 @@ struct iwl4965_missed_beacon_notif {
*/
/*
- * Table entries in SENSITIVITY_CMD (struct iwl4965_sensitivity_cmd)
+ * Table entries in SENSITIVITY_CMD (struct iwl_sensitivity_cmd)
*/
#define HD_TABLE_SIZE (11) /* number of entries */
#define HD_MIN_ENERGY_CCK_DET_INDEX (0) /* table indexes */
@@ -2574,18 +2574,18 @@ struct iwl4965_missed_beacon_notif {
#define HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX (9)
#define HD_OFDM_ENERGY_TH_IN_INDEX (10)
-/* Control field in struct iwl4965_sensitivity_cmd */
+/* Control field in struct iwl_sensitivity_cmd */
#define SENSITIVITY_CMD_CONTROL_DEFAULT_TABLE __constant_cpu_to_le16(0)
#define SENSITIVITY_CMD_CONTROL_WORK_TABLE __constant_cpu_to_le16(1)
/**
- * struct iwl4965_sensitivity_cmd
+ * struct iwl_sensitivity_cmd
* @control: (1) updates working table, (0) updates default table
* @table: energy threshold values, use HD_* as index into table
*
* Always use "1" in "control" to update uCode's working table and DSP.
*/
-struct iwl4965_sensitivity_cmd {
+struct iwl_sensitivity_cmd {
__le16 control; /* always use "1" */
__le16 table[HD_TABLE_SIZE]; /* use HD_* as index */
} __attribute__ ((packed));
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 17f629fb96f..be4cc5ffa74 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -43,6 +43,7 @@
#include "iwl-core.h"
#include "iwl-io.h"
#include "iwl-helpers.h"
+#include "iwl-calib.h"
/* module parameters */
static struct iwl_mod_params iwl4965_mod_params = {
@@ -1032,418 +1033,15 @@ void iwl4965_rf_kill_ct_config(struct iwl_priv *priv)
IWL_DEBUG_INFO("REPLY_CT_KILL_CONFIG_CMD succeeded\n");
}
-#ifdef CONFIG_IWL4965_SENSITIVITY
-
-/* "false alarms" are signals that our DSP tries to lock onto,
- * but then determines that they are either noise, or transmissions
- * from a distant wireless network (also "noise", really) that get
- * "stepped on" by stronger transmissions within our own network.
- * This algorithm attempts to set a sensitivity level that is high
- * enough to receive all of our own network traffic, but not so
- * high that our DSP gets too busy trying to lock onto non-network
- * activity/noise. */
-static int iwl4965_sens_energy_cck(struct iwl_priv *priv,
- u32 norm_fa,
- u32 rx_enable_time,
- struct statistics_general_data *rx_info)
-{
- u32 max_nrg_cck = 0;
- int i = 0;
- u8 max_silence_rssi = 0;
- u32 silence_ref = 0;
- u8 silence_rssi_a = 0;
- u8 silence_rssi_b = 0;
- u8 silence_rssi_c = 0;
- u32 val;
-
- /* "false_alarms" values below are cross-multiplications to assess the
- * numbers of false alarms within the measured period of actual Rx
- * (Rx is off when we're txing), vs the min/max expected false alarms
- * (some should be expected if rx is sensitive enough) in a
- * hypothetical listening period of 200 time units (TU), 204.8 msec:
- *
- * MIN_FA/fixed-time < false_alarms/actual-rx-time < MAX_FA/beacon-time
- *
- * */
- u32 false_alarms = norm_fa * 200 * 1024;
- u32 max_false_alarms = MAX_FA_CCK * rx_enable_time;
- u32 min_false_alarms = MIN_FA_CCK * rx_enable_time;
- struct iwl4965_sensitivity_data *data = NULL;
-
- data = &(priv->sensitivity_data);
-
- data->nrg_auto_corr_silence_diff = 0;
-
- /* Find max silence rssi among all 3 receivers.
- * This is background noise, which may include transmissions from other
- * networks, measured during silence before our network's beacon */
- silence_rssi_a = (u8)((rx_info->beacon_silence_rssi_a &
- ALL_BAND_FILTER) >> 8);
- silence_rssi_b = (u8)((rx_info->beacon_silence_rssi_b &
- ALL_BAND_FILTER) >> 8);
- silence_rssi_c = (u8)((rx_info->beacon_silence_rssi_c &
- ALL_BAND_FILTER) >> 8);
-
- val = max(silence_rssi_b, silence_rssi_c);
- max_silence_rssi = max(silence_rssi_a, (u8) val);
-
- /* Store silence rssi in 20-beacon history table */
- data->nrg_silence_rssi[data->nrg_silence_idx] = max_silence_rssi;
- data->nrg_silence_idx++;
- if (data->nrg_silence_idx >= NRG_NUM_PREV_STAT_L)
- data->nrg_silence_idx = 0;
-
- /* Find max silence rssi across 20 beacon history */
- for (i = 0; i < NRG_NUM_PREV_STAT_L; i++) {
- val = data->nrg_silence_rssi[i];
- silence_ref = max(silence_ref, val);
- }
- IWL_DEBUG_CALIB("silence a %u, b %u, c %u, 20-bcn max %u\n",
- silence_rssi_a, silence_rssi_b, silence_rssi_c,
- silence_ref);
-
- /* Find max rx energy (min value!) among all 3 receivers,
- * measured during beacon frame.
- * Save it in 10-beacon history table. */
- i = data->nrg_energy_idx;
- val = min(rx_info->beacon_energy_b, rx_info->beacon_energy_c);
- data->nrg_value[i] = min(rx_info->beacon_energy_a, val);
-
- data->nrg_energy_idx++;
- if (data->nrg_energy_idx >= 10)
- data->nrg_energy_idx = 0;
-
- /* Find min rx energy (max value) across 10 beacon history.
- * This is the minimum signal level that we want to receive well.
- * Add backoff (margin so we don't miss slightly lower energy frames).
- * This establishes an upper bound (min value) for energy threshold. */
- max_nrg_cck = data->nrg_value[0];
- for (i = 1; i < 10; i++)
- max_nrg_cck = (u32) max(max_nrg_cck, (data->nrg_value[i]));
- max_nrg_cck += 6;
-
- IWL_DEBUG_CALIB("rx energy a %u, b %u, c %u, 10-bcn max/min %u\n",
- rx_info->beacon_energy_a, rx_info->beacon_energy_b,
- rx_info->beacon_energy_c, max_nrg_cck - 6);
-
- /* Count number of consecutive beacons with fewer-than-desired
- * false alarms. */
- if (false_alarms < min_false_alarms)
- data->num_in_cck_no_fa++;
- else
- data->num_in_cck_no_fa = 0;
- IWL_DEBUG_CALIB("consecutive bcns with few false alarms = %u\n",
- data->num_in_cck_no_fa);
-
- /* If we got too many false alarms this time, reduce sensitivity */
- if (false_alarms > max_false_alarms) {
- IWL_DEBUG_CALIB("norm FA %u > max FA %u\n",
- false_alarms, max_false_alarms);
- IWL_DEBUG_CALIB("... reducing sensitivity\n");
- data->nrg_curr_state = IWL_FA_TOO_MANY;
-
- if (data->auto_corr_cck > AUTO_CORR_MAX_TH_CCK) {
- /* Store for "fewer than desired" on later beacon */
- data->nrg_silence_ref = silence_ref;
-
- /* increase energy threshold (reduce nrg value)
- * to decrease sensitivity */
- if (data->nrg_th_cck > (NRG_MAX_CCK + NRG_STEP_CCK))
- data->nrg_th_cck = data->nrg_th_cck
- - NRG_STEP_CCK;
- }
-
- /* increase auto_corr values to decrease sensitivity */
- if (data->auto_corr_cck < AUTO_CORR_MAX_TH_CCK)
- data->auto_corr_cck = AUTO_CORR_MAX_TH_CCK + 1;
- else {
- val = data->auto_corr_cck + AUTO_CORR_STEP_CCK;
- data->auto_corr_cck = min((u32)AUTO_CORR_MAX_CCK, val);
- }
- val = data->auto_corr_cck_mrc + AUTO_CORR_STEP_CCK;
- data->auto_corr_cck_mrc = min((u32)AUTO_CORR_MAX_CCK_MRC, val);
-
- /* Else if we got fewer than desired, increase sensitivity */
- } else if (false_alarms < min_false_alarms) {
- data->nrg_curr_state = IWL_FA_TOO_FEW;
-
- /* Compare silence level with silence level for most recent
- * healthy number or too many false alarms */
- data->nrg_auto_corr_silence_diff = (s32)data->nrg_silence_ref -
- (s32)silence_ref;
-
- IWL_DEBUG_CALIB("norm FA %u < min FA %u, silence diff %d\n",
- false_alarms, min_false_alarms,
- data->nrg_auto_corr_silence_diff);
-
- /* Increase value to increase sensitivity, but only if:
- * 1a) previous beacon did *not* have *too many* false alarms
- * 1b) AND there's a significant difference in Rx levels
- * from a previous beacon with too many, or healthy # FAs
- * OR 2) We've seen a lot of beacons (100) with too few
- * false alarms */
- if ((data->nrg_prev_state != IWL_FA_TOO_MANY) &&
- ((data->nrg_auto_corr_silence_diff > NRG_DIFF) ||
- (data->num_in_cck_no_fa > MAX_NUMBER_CCK_NO_FA))) {
-
- IWL_DEBUG_CALIB("... increasing sensitivity\n");
- /* Increase nrg value to increase sensitivity */
- val = data->nrg_th_cck + NRG_STEP_CCK;
- data->nrg_th_cck = min((u32)NRG_MIN_CCK, val);
-
- /* Decrease auto_corr values to increase sensitivity */
- val = data->auto_corr_cck - AUTO_CORR_STEP_CCK;
- data->auto_corr_cck = max((u32)AUTO_CORR_MIN_CCK, val);
-
- val = data->auto_corr_cck_mrc - AUTO_CORR_STEP_CCK;
- data->auto_corr_cck_mrc =
- max((u32)AUTO_CORR_MIN_CCK_MRC, val);
-
- } else
- IWL_DEBUG_CALIB("... but not changing sensitivity\n");
-
- /* Else we got a healthy number of false alarms, keep status quo */
- } else {
- IWL_DEBUG_CALIB(" FA in safe zone\n");
- data->nrg_curr_state = IWL_FA_GOOD_RANGE;
-
- /* Store for use in "fewer than desired" with later beacon */
- data->nrg_silence_ref = silence_ref;
-
- /* If previous beacon had too many false alarms,
- * give it some extra margin by reducing sensitivity again
- * (but don't go below measured energy of desired Rx) */
- if (IWL_FA_TOO_MANY == data->nrg_prev_state) {
- IWL_DEBUG_CALIB("... increasing margin\n");
- data->nrg_th_cck -= NRG_MARGIN;
- }
- }
-
- /* Make sure the energy threshold does not go above the measured
- * energy of the desired Rx signals (reduced by backoff margin),
- * or else we might start missing Rx frames.
- * Lower value is higher energy, so we use max()!
- */
- data->nrg_th_cck = max(max_nrg_cck, data->nrg_th_cck);
- IWL_DEBUG_CALIB("new nrg_th_cck %u\n", data->nrg_th_cck);
-
- data->nrg_prev_state = data->nrg_curr_state;
-
- return 0;
-}
-
-
-static int iwl4965_sens_auto_corr_ofdm(struct iwl_priv *priv,
- u32 norm_fa,
- u32 rx_enable_time)
-{
- u32 val;
- u32 false_alarms = norm_fa * 200 * 1024;
- u32 max_false_alarms = MAX_FA_OFDM * rx_enable_time;
- u32 min_false_alarms = MIN_FA_OFDM * rx_enable_time;
- struct iwl4965_sensitivity_data *data = NULL;
-
- data = &(priv->sensitivity_data);
-
- /* If we got too many false alarms this time, reduce sensitivity */
- if (false_alarms > max_false_alarms) {
-
- IWL_DEBUG_CALIB("norm FA %u > max FA %u)\n",
- false_alarms, max_false_alarms);
-
- val = data->auto_corr_ofdm + AUTO_CORR_STEP_OFDM;
- data->auto_corr_ofdm =
- min((u32)AUTO_CORR_MAX_OFDM, val);
-
- val = data->auto_corr_ofdm_mrc + AUTO_CORR_STEP_OFDM;
- data->auto_corr_ofdm_mrc =
- min((u32)AUTO_CORR_MAX_OFDM_MRC, val);
-
- val = data->auto_corr_ofdm_x1 + AUTO_CORR_STEP_OFDM;
- data->auto_corr_ofdm_x1 =
- min((u32)AUTO_CORR_MAX_OFDM_X1, val);
-
- val = data->auto_corr_ofdm_mrc_x1 + AUTO_CORR_STEP_OFDM;
- data->auto_corr_ofdm_mrc_x1 =
- min((u32)AUTO_CORR_MAX_OFDM_MRC_X1, val);
- }
-
- /* Else if we got fewer than desired, increase sensitivity */
- else if (false_alarms < min_false_alarms) {
-
- IWL_DEBUG_CALIB("norm FA %u < min FA %u\n",
- false_alarms, min_false_alarms);
-
- val = data->auto_corr_ofdm - AUTO_CORR_STEP_OFDM;
- data->auto_corr_ofdm =
- max((u32)AUTO_CORR_MIN_OFDM, val);
-
- val = data->auto_corr_ofdm_mrc - AUTO_CORR_STEP_OFDM;
- data->auto_corr_ofdm_mrc =
- max((u32)AUTO_CORR_MIN_OFDM_MRC, val);
-
- val = data->auto_corr_ofdm_x1 - AUTO_CORR_STEP_OFDM;
- data->auto_corr_ofdm_x1 =
- max((u32)AUTO_CORR_MIN_OFDM_X1, val);
-
- val = data->auto_corr_ofdm_mrc_x1 - AUTO_CORR_STEP_OFDM;
- data->auto_corr_ofdm_mrc_x1 =
- max((u32)AUTO_CORR_MIN_OFDM_MRC_X1, val);
- }
-
- else
- IWL_DEBUG_CALIB("min FA %u < norm FA %u < max FA %u OK\n",
- min_false_alarms, false_alarms, max_false_alarms);
-
- return 0;
-}
-
-static int iwl4965_sensitivity_callback(struct iwl_priv *priv,
- struct iwl_cmd *cmd, struct sk_buff *skb)
-{
- /* We didn't cache the SKB; let the caller free it */
- return 1;
-}
-
-/* Prepare a SENSITIVITY_CMD, send to uCode if values have changed */
-static int iwl4965_sensitivity_write(struct iwl_priv *priv, u8 flags)
-{
- struct iwl4965_sensitivity_cmd cmd ;
- struct iwl4965_sensitivity_data *data = NULL;
- struct iwl_host_cmd cmd_out = {
- .id = SENSITIVITY_CMD,
- .len = sizeof(struct iwl4965_sensitivity_cmd),
- .meta.flags = flags,
- .data = &cmd,
- };
- int ret;
-
- data = &(priv->sensitivity_data);
-
- memset(&cmd, 0, sizeof(cmd));
-
- cmd.table[HD_AUTO_CORR32_X4_TH_ADD_MIN_INDEX] =
- cpu_to_le16((u16)data->auto_corr_ofdm);
- cmd.table[HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_INDEX] =
- cpu_to_le16((u16)data->auto_corr_ofdm_mrc);
- cmd.table[HD_AUTO_CORR32_X1_TH_ADD_MIN_INDEX] =
- cpu_to_le16((u16)data->auto_corr_ofdm_x1);
- cmd.table[HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_INDEX] =
- cpu_to_le16((u16)data->auto_corr_ofdm_mrc_x1);
-
- cmd.table[HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX] =
- cpu_to_le16((u16)data->auto_corr_cck);
- cmd.table[HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX] =
- cpu_to_le16((u16)data->auto_corr_cck_mrc);
-
- cmd.table[HD_MIN_ENERGY_CCK_DET_INDEX] =
- cpu_to_le16((u16)data->nrg_th_cck);
- cmd.table[HD_MIN_ENERGY_OFDM_DET_INDEX] =
- cpu_to_le16((u16)data->nrg_th_ofdm);
-
- cmd.table[HD_BARKER_CORR_TH_ADD_MIN_INDEX] =
- __constant_cpu_to_le16(190);
- cmd.table[HD_BARKER_CORR_TH_ADD_MIN_MRC_INDEX] =
- __constant_cpu_to_le16(390);
- cmd.table[HD_OFDM_ENERGY_TH_IN_INDEX] =
- __constant_cpu_to_le16(62);
-
- IWL_DEBUG_CALIB("ofdm: ac %u mrc %u x1 %u mrc_x1 %u thresh %u\n",
- data->auto_corr_ofdm, data->auto_corr_ofdm_mrc,
- data->auto_corr_ofdm_x1, data->auto_corr_ofdm_mrc_x1,
- data->nrg_th_ofdm);
-
- IWL_DEBUG_CALIB("cck: ac %u mrc %u thresh %u\n",
- data->auto_corr_cck, data->auto_corr_cck_mrc,
- data->nrg_th_cck);
-
- /* Update uCode's "work" table, and copy it to DSP */
- cmd.control = SENSITIVITY_CMD_CONTROL_WORK_TABLE;
-
- if (flags & CMD_ASYNC)
- cmd_out.meta.u.callback = iwl4965_sensitivity_callback;
-
- /* Don't send command to uCode if nothing has changed */
- if (!memcmp(&cmd.table[0], &(priv->sensitivity_tbl[0]),
- sizeof(u16)*HD_TABLE_SIZE)) {
- IWL_DEBUG_CALIB("No change in SENSITIVITY_CMD\n");
- return 0;
- }
-
- /* Copy table for comparison next time */
- memcpy(&(priv->sensitivity_tbl[0]), &(cmd.table[0]),
- sizeof(u16)*HD_TABLE_SIZE);
-
- ret = iwl_send_cmd(priv, &cmd_out);
- if (ret)
- IWL_ERROR("SENSITIVITY_CMD failed\n");
-
- return ret;
-}
-
-void iwl4965_init_sensitivity(struct iwl_priv *priv, u8 flags, u8 force)
-{
- struct iwl4965_sensitivity_data *data = NULL;
- int i;
- int ret = 0;
-
- IWL_DEBUG_CALIB("Start iwl4965_init_sensitivity\n");
-
- if (force)
- memset(&(priv->sensitivity_tbl[0]), 0,
- sizeof(u16)*HD_TABLE_SIZE);
-
- /* Clear driver's sensitivity algo data */
- data = &(priv->sensitivity_data);
- memset(data, 0, sizeof(struct iwl4965_sensitivity_data));
-
- data->num_in_cck_no_fa = 0;
- data->nrg_curr_state = IWL_FA_TOO_MANY;
- data->nrg_prev_state = IWL_FA_TOO_MANY;
- data->nrg_silence_ref = 0;
- data->nrg_silence_idx = 0;
- data->nrg_energy_idx = 0;
-
- for (i = 0; i < 10; i++)
- data->nrg_value[i] = 0;
-
- for (i = 0; i < NRG_NUM_PREV_STAT_L; i++)
- data->nrg_silence_rssi[i] = 0;
-
- data->auto_corr_ofdm = 90;
- data->auto_corr_ofdm_mrc = 170;
- data->auto_corr_ofdm_x1 = 105;
- data->auto_corr_ofdm_mrc_x1 = 220;
- data->auto_corr_cck = AUTO_CORR_CCK_MIN_VAL_DEF;
- data->auto_corr_cck_mrc = 200;
- data->nrg_th_cck = 100;
- data->nrg_th_ofdm = 100;
-
- data->last_bad_plcp_cnt_ofdm = 0;
- data->last_fa_cnt_ofdm = 0;
- data->last_bad_plcp_cnt_cck = 0;
- data->last_fa_cnt_cck = 0;
-
- /* Clear prior Sensitivity command data to force send to uCode */
- if (force)
- memset(&(priv->sensitivity_tbl[0]), 0,
- sizeof(u16)*HD_TABLE_SIZE);
-
- ret |= iwl4965_sensitivity_write(priv, flags);
- IWL_DEBUG_CALIB("<<return 0x%X\n", ret);
-
- return;
-}
-
+#ifdef CONFIG_IWL4965_RUN_TIME_CALIB
/* Reset differential Rx gains in NIC to prepare for chain noise calibration.
* Called after every association, but this runs only once!
* ... once chain noise is calibrated the first time, it's good forever. */
-void iwl4965_chain_noise_reset(struct iwl_priv *priv)
+static void iwl4965_chain_noise_reset(struct iwl_priv *priv)
{
- struct iwl4965_chain_noise_data *data = NULL;
+ struct iwl_chain_noise_data *data = &(priv->chain_noise_data);
- data = &(priv->chain_noise_data);
if ((data->state == IWL_CHAIN_NOISE_ALIVE) && iwl_is_associated(priv)) {
struct iwl4965_calibration_cmd cmd;
@@ -1452,357 +1050,76 @@ void iwl4965_chain_noise_reset(struct iwl_priv *priv)
cmd.diff_gain_a = 0;
cmd.diff_gain_b = 0;
cmd.diff_gain_c = 0;
- iwl_send_cmd_pdu_async(priv, REPLY_PHY_CALIBRATION_CMD,
- sizeof(cmd), &cmd, NULL);
- msleep(4);
+ if (iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD,
+ sizeof(cmd), &cmd))
+ IWL_ERROR("Could not send REPLY_PHY_CALIBRATION_CMD\n");
data->state = IWL_CHAIN_NOISE_ACCUMULATE;
IWL_DEBUG_CALIB("Run chain_noise_calibrate\n");
}
- return;
}
-/*
- * Accumulate 20 beacons of signal and noise statistics for each of
- * 3 receivers/antennas/rx-chains, then figure out:
- * 1) Which antennas are connected.
- * 2) Differential rx gain settings to balance the 3 receivers.
- */
-static void iwl4965_noise_calibration(struct iwl_priv *priv,
- struct iwl4965_notif_statistics *stat_resp)
+static void iwl4965_gain_computation(struct iwl_priv *priv,
+ u32 *average_noise,
+ u16 min_average_noise_antenna_i,
+ u32 min_average_noise)
{
- struct iwl4965_chain_noise_data *data = NULL;
- int ret = 0;
-
- u32 chain_noise_a;
- u32 chain_noise_b;
- u32 chain_noise_c;
- u32 chain_sig_a;
- u32 chain_sig_b;
- u32 chain_sig_c;
- u32 average_sig[NUM_RX_CHAINS] = {INITIALIZATION_VALUE};
- u32 average_noise[NUM_RX_CHAINS] = {INITIALIZATION_VALUE};
- u32 max_average_sig;
- u16 max_average_sig_antenna_i;
- u32 min_average_noise = MIN_AVERAGE_NOISE_MAX_VALUE;
- u16 min_average_noise_antenna_i = INITIALIZATION_VALUE;
- u16 i = 0;
- u16 chan_num = INITIALIZATION_VALUE;
- u32 band = INITIALIZATION_VALUE;
- u32 active_chains = 0;
- unsigned long flags;
- struct statistics_rx_non_phy *rx_info = &(stat_resp->rx.general);
-
- data = &(priv->chain_noise_data);
+ int i, ret;
+ struct iwl_chain_noise_data *data = &priv->chain_noise_data;
- /* Accumulate just the first 20 beacons after the first association,
- * then we're done forever. */
- if (data->state != IWL_CHAIN_NOISE_ACCUMULATE) {
- if (data->state == IWL_CHAIN_NOISE_ALIVE)
- IWL_DEBUG_CALIB("Wait for noise calib reset\n");
- return;
- }
-
- spin_lock_irqsave(&priv->lock, flags);
- if (rx_info->interference_data_flag != INTERFERENCE_DATA_AVAILABLE) {
- IWL_DEBUG_CALIB(" << Interference data unavailable\n");
- spin_unlock_irqrestore(&priv->lock, flags);
- return;
- }
-
- band = (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) ? 0 : 1;
- chan_num = le16_to_cpu(priv->staging_rxon.channel);
-
- /* Make sure we accumulate data for just the associated channel
- * (even if scanning). */
- if ((chan_num != (le32_to_cpu(stat_resp->flag) >> 16)) ||
- ((STATISTICS_REPLY_FLG_BAND_24G_MSK ==
- (stat_resp->flag & STATISTICS_REPLY_FLG_BAND_24G_MSK)) && band)) {
- IWL_DEBUG_CALIB("Stats not from chan=%d, band=%d\n",
- chan_num, band);
- spin_unlock_irqrestore(&priv->lock, flags);
- return;
- }
-
- /* Accumulate beacon statistics values across 20 beacons */
- chain_noise_a = le32_to_cpu(rx_info->beacon_silence_rssi_a) &
- IN_BAND_FILTER;
- chain_noise_b = le32_to_cpu(rx_info->beacon_silence_rssi_b) &
- IN_BAND_FILTER;
- chain_noise_c = le32_to_cpu(rx_info->beacon_silence_rssi_c) &
- IN_BAND_FILTER;
-
- chain_sig_a = le32_to_cpu(rx_info->beacon_rssi_a) & IN_BAND_FILTER;
- chain_sig_b = le32_to_cpu(rx_info->beacon_rssi_b) & IN_BAND_FILTER;
- chain_sig_c = le32_to_cpu(rx_info->beacon_rssi_c) & IN_BAND_FILTER;
+ data->delta_gain_code[min_average_noise_antenna_i] = 0;
- spin_unlock_irqrestore(&priv->lock, flags);
+ for (i = 0; i < NUM_RX_CHAINS; i++) {
+ s32 delta_g = 0;
- data->beacon_count++;
-
- data->chain_noise_a = (chain_noise_a + data->chain_noise_a);
- data->chain_noise_b = (chain_noise_b + data->chain_noise_b);
- data->chain_noise_c = (chain_noise_c + data->chain_noise_c);
-
- data->chain_signal_a = (chain_sig_a + data->chain_signal_a);
- data->chain_signal_b = (chain_sig_b + data->chain_signal_b);
- data->chain_signal_c = (chain_sig_c + data->chain_signal_c);
-
- IWL_DEBUG_CALIB("chan=%d, band=%d, beacon=%d\n", chan_num, band,
- data->beacon_count);
- IWL_DEBUG_CALIB("chain_sig: a %d b %d c %d\n",
- chain_sig_a, chain_sig_b, chain_sig_c);
- IWL_DEBUG_CALIB("chain_noise: a %d b %d c %d\n",
- chain_noise_a, chain_noise_b, chain_noise_c);
-
- /* If this is the 20th beacon, determine:
- * 1) Disconnected antennas (using signal strengths)
- * 2) Differential gain (using silence noise) to balance receivers */
- if (data->beacon_count == CAL_NUM_OF_BEACONS) {
-
- /* Analyze signal for disconnected antenna */
- average_sig[0] = (data->chain_signal_a) / CAL_NUM_OF_BEACONS;
- average_sig[1] = (data->chain_signal_b) / CAL_NUM_OF_BEACONS;
- average_sig[2] = (data->chain_signal_c) / CAL_NUM_OF_BEACONS;
-
- if (average_sig[0] >= average_sig[1]) {
- max_average_sig = average_sig[0];
- max_average_sig_antenna_i = 0;
- active_chains = (1 << max_average_sig_antenna_i);
- } else {
- max_average_sig = average_sig[1];
- max_average_sig_antenna_i = 1;
- active_chains = (1 << max_average_sig_antenna_i);
- }
-
- if (average_sig[2] >= max_average_sig) {
- max_average_sig = average_sig[2];
- max_average_sig_antenna_i = 2;
- active_chains = (1 << max_average_sig_antenna_i);
- }
-
- IWL_DEBUG_CALIB("average_sig: a %d b %d c %d\n",
- average_sig[0], average_sig[1], average_sig[2]);
- IWL_DEBUG_CALIB("max_average_sig = %d, antenna %d\n",
- max_average_sig, max_average_sig_antenna_i);
-
- /* Compare signal strengths for all 3 receivers. */
- for (i = 0; i < NUM_RX_CHAINS; i++) {
- if (i != max_average_sig_antenna_i) {
- s32 rssi_delta = (max_average_sig -
- average_sig[i]);
-
- /* If signal is very weak, compared with
- * strongest, mark it as disconnected. */
- if (rssi_delta > MAXIMUM_ALLOWED_PATHLOSS)
- data->disconn_array[i] = 1;
- else
- active_chains |= (1 << i);
- IWL_DEBUG_CALIB("i = %d rssiDelta = %d "
- "disconn_array[i] = %d\n",
- i, rssi_delta, data->disconn_array[i]);
- }
- }
-
- /*If both chains A & B are disconnected -
- * connect B and leave A as is */
- if (data->disconn_array[CHAIN_A] &&
- data->disconn_array[CHAIN_B]) {
- data->disconn_array[CHAIN_B] = 0;
- active_chains |= (1 << CHAIN_B);
- IWL_DEBUG_CALIB("both A & B chains are disconnected! "
- "W/A - declare B as connected\n");
- }
-
- IWL_DEBUG_CALIB("active_chains (bitwise) = 0x%x\n",
- active_chains);
-
- /* Save for use within RXON, TX, SCAN commands, etc. */
- priv->valid_antenna = active_chains;
-
- /* Analyze noise for rx balance */
- average_noise[0] = ((data->chain_noise_a)/CAL_NUM_OF_BEACONS);
- average_noise[1] = ((data->chain_noise_b)/CAL_NUM_OF_BEACONS);
- average_noise[2] = ((data->chain_noise_c)/CAL_NUM_OF_BEACONS);
-
- for (i = 0; i < NUM_RX_CHAINS; i++) {
- if (!(data->disconn_array[i]) &&
- (average_noise[i] <= min_average_noise)) {
- /* This means that chain i is active and has
- * lower noise values so far: */
- min_average_noise = average_noise[i];
- min_average_noise_antenna_i = i;
- }
- }
-
- data->delta_gain_code[min_average_noise_antenna_i] = 0;
-
- IWL_DEBUG_CALIB("average_noise: a %d b %d c %d\n",
- average_noise[0], average_noise[1],
- average_noise[2]);
-
- IWL_DEBUG_CALIB("min_average_noise = %d, antenna %d\n",
- min_average_noise, min_average_noise_antenna_i);
-
- for (i = 0; i < NUM_RX_CHAINS; i++) {
- s32 delta_g = 0;
-
- if (!(data->disconn_array[i]) &&
- (data->delta_gain_code[i] ==
+ if (!(data->disconn_array[i]) &&
+ (data->delta_gain_code[i] ==
CHAIN_NOISE_DELTA_GAIN_INIT_VAL)) {
- delta_g = average_noise[i] - min_average_noise;
- data->delta_gain_code[i] = (u8)((delta_g *
- 10) / 15);
- if (CHAIN_NOISE_MAX_DELTA_GAIN_CODE <
- data->delta_gain_code[i])
- data->delta_gain_code[i] =
- CHAIN_NOISE_MAX_DELTA_GAIN_CODE;
-
- data->delta_gain_code[i] =
- (data->delta_gain_code[i] | (1 << 2));
- } else
- data->delta_gain_code[i] = 0;
- }
- IWL_DEBUG_CALIB("delta_gain_codes: a %d b %d c %d\n",
- data->delta_gain_code[0],
- data->delta_gain_code[1],
- data->delta_gain_code[2]);
-
- /* Differential gain gets sent to uCode only once */
- if (!data->radio_write) {
- struct iwl4965_calibration_cmd cmd;
- data->radio_write = 1;
-
- memset(&cmd, 0, sizeof(cmd));
- cmd.opCode = PHY_CALIBRATE_DIFF_GAIN_CMD;
- cmd.diff_gain_a = data->delta_gain_code[0];
- cmd.diff_gain_b = data->delta_gain_code[1];
- cmd.diff_gain_c = data->delta_gain_code[2];
- ret = iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD,
- sizeof(cmd), &cmd);
- if (ret)
- IWL_DEBUG_CALIB("fail sending cmd "
- "REPLY_PHY_CALIBRATION_CMD \n");
-
- /* TODO we might want recalculate
- * rx_chain in rxon cmd */
-
- /* Mark so we run this algo only once! */
- data->state = IWL_CHAIN_NOISE_CALIBRATED;
+ delta_g = average_noise[i] - min_average_noise;
+ data->delta_gain_code[i] = (u8)((delta_g * 10) / 15);
+ data->delta_gain_code[i] =
+ min(data->delta_gain_code[i],
+ (u8) CHAIN_NOISE_MAX_DELTA_GAIN_CODE);
+
+ data->delta_gain_code[i] =
+ (data->delta_gain_code[i] | (1 << 2));
+ } else {
+ data->delta_gain_code[i] = 0;
}
- data->chain_noise_a = 0;
- data->chain_noise_b = 0;
- data->chain_noise_c = 0;
- data->chain_signal_a = 0;
- data->chain_signal_b = 0;
- data->chain_signal_c = 0;
- data->beacon_count = 0;
- }
- return;
-}
-
-static void iwl4965_sensitivity_calibration(struct iwl_priv *priv,
- struct iwl4965_notif_statistics *resp)
-{
- u32 rx_enable_time;
- u32 fa_cck;
- u32 fa_ofdm;
- u32 bad_plcp_cck;
- u32 bad_plcp_ofdm;
- u32 norm_fa_ofdm;
- u32 norm_fa_cck;
- struct iwl4965_sensitivity_data *data = NULL;
- struct statistics_rx_non_phy *rx_info = &(resp->rx.general);
- struct statistics_rx *statistics = &(resp->rx);
- unsigned long flags;
- struct statistics_general_data statis;
- int ret;
-
- data = &(priv->sensitivity_data);
-
- if (!iwl_is_associated(priv)) {
- IWL_DEBUG_CALIB("<< - not associated\n");
- return;
- }
-
- spin_lock_irqsave(&priv->lock, flags);
- if (rx_info->interference_data_flag != INTERFERENCE_DATA_AVAILABLE) {
- IWL_DEBUG_CALIB("<< invalid data.\n");
- spin_unlock_irqrestore(&priv->lock, flags);
- return;
- }
-
- /* Extract Statistics: */
- rx_enable_time = le32_to_cpu(rx_info->channel_load);
- fa_cck = le32_to_cpu(statistics->cck.false_alarm_cnt);
- fa_ofdm = le32_to_cpu(statistics->ofdm.false_alarm_cnt);
- bad_plcp_cck = le32_to_cpu(statistics->cck.plcp_err);
- bad_plcp_ofdm = le32_to_cpu(statistics->ofdm.plcp_err);
-
- statis.beacon_silence_rssi_a =
- le32_to_cpu(statistics->general.beacon_silence_rssi_a);
- statis.beacon_silence_rssi_b =
- le32_to_cpu(statistics->general.beacon_silence_rssi_b);
- statis.beacon_silence_rssi_c =
- le32_to_cpu(statistics->general.beacon_silence_rssi_c);
- statis.beacon_energy_a =
- le32_to_cpu(statistics->general.beacon_energy_a);
- statis.beacon_energy_b =
- le32_to_cpu(statistics->general.beacon_energy_b);
- statis.beacon_energy_c =
- le32_to_cpu(statistics->general.beacon_energy_c);
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
- IWL_DEBUG_CALIB("rx_enable_time = %u usecs\n", rx_enable_time);
-
- if (!rx_enable_time) {
- IWL_DEBUG_CALIB("<< RX Enable Time == 0! \n");
- return;
- }
-
- /* These statistics increase monotonically, and do not reset
- * at each beacon. Calculate difference from last value, or just
- * use the new statistics value if it has reset or wrapped around. */
- if (data->last_bad_plcp_cnt_cck > bad_plcp_cck)
- data->last_bad_plcp_cnt_cck = bad_plcp_cck;
- else {
- bad_plcp_cck -= data->last_bad_plcp_cnt_cck;
- data->last_bad_plcp_cnt_cck += bad_plcp_cck;
- }
-
- if (data->last_bad_plcp_cnt_ofdm > bad_plcp_ofdm)
- data->last_bad_plcp_cnt_ofdm = bad_plcp_ofdm;
- else {
- bad_plcp_ofdm -= data->last_bad_plcp_cnt_ofdm;
- data->last_bad_plcp_cnt_ofdm += bad_plcp_ofdm;
}
+ IWL_DEBUG_CALIB("delta_gain_codes: a %d b %d c %d\n",
+ data->delta_gain_code[0],
+ data->delta_gain_code[1],
+ data->delta_gain_code[2]);
- if (data->last_fa_cnt_ofdm > fa_ofdm)
- data->last_fa_cnt_ofdm = fa_ofdm;
- else {
- fa_ofdm -= data->last_fa_cnt_ofdm;
- data->last_fa_cnt_ofdm += fa_ofdm;
- }
+ /* Differential gain gets sent to uCode only once */
+ if (!data->radio_write) {
+ struct iwl4965_calibration_cmd cmd;
+ data->radio_write = 1;
- if (data->last_fa_cnt_cck > fa_cck)
- data->last_fa_cnt_cck = fa_cck;
- else {
- fa_cck -= data->last_fa_cnt_cck;
- data->last_fa_cnt_cck += fa_cck;
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.opCode = PHY_CALIBRATE_DIFF_GAIN_CMD;
+ cmd.diff_gain_a = data->delta_gain_code[0];
+ cmd.diff_gain_b = data->delta_gain_code[1];
+ cmd.diff_gain_c = data->delta_gain_code[2];
+ ret = iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD,
+ sizeof(cmd), &cmd);
+ if (ret)
+ IWL_DEBUG_CALIB("fail sending cmd "
+ "REPLY_PHY_CALIBRATION_CMD \n");
+
+ /* TODO we might want recalculate
+ * rx_chain in rxon cmd */
+
+ /* Mark so we run this algo only once! */
+ data->state = IWL_CHAIN_NOISE_CALIBRATED;
}
-
- /* Total aborted signal locks */
- norm_fa_ofdm = fa_ofdm + bad_plcp_ofdm;
- norm_fa_cck = fa_cck + bad_plcp_cck;
-
- IWL_DEBUG_CALIB("cck: fa %u badp %u ofdm: fa %u badp %u\n", fa_cck,
- bad_plcp_cck, fa_ofdm, bad_plcp_ofdm);
-
- iwl4965_sens_auto_corr_ofdm(priv, norm_fa_ofdm, rx_enable_time);
- iwl4965_sens_energy_cck(priv, norm_fa_cck, rx_enable_time, &statis);
- ret = iwl4965_sensitivity_write(priv, CMD_ASYNC);
-
- return;
+ data->chain_noise_a = 0;
+ data->chain_noise_b = 0;
+ data->chain_noise_c = 0;
+ data->chain_signal_a = 0;
+ data->chain_signal_b = 0;
+ data->chain_signal_c = 0;
+ data->beacon_count = 0;
}
static void iwl4965_bg_sensitivity_work(struct work_struct *work)
@@ -1819,21 +1136,15 @@ static void iwl4965_bg_sensitivity_work(struct work_struct *work)
}
if (priv->start_calib) {
- iwl4965_noise_calibration(priv, &priv->statistics);
-
- if (priv->sensitivity_data.state ==
- IWL_SENS_CALIB_NEED_REINIT) {
- iwl4965_init_sensitivity(priv, CMD_ASYNC, 0);
- priv->sensitivity_data.state = IWL_SENS_CALIB_ALLOWED;
- } else
- iwl4965_sensitivity_calibration(priv,
- &priv->statistics);
+ iwl_chain_noise_calibration(priv, &priv->statistics);
+
+ iwl_sensitivity_calibration(priv, &priv->statistics);
}
mutex_unlock(&priv->mutex);
return;
}
-#endif /*CONFIG_IWL4965_SENSITIVITY*/
+#endif /*CONFIG_IWL4965_RUN_TIME_CALIB*/
static void iwl4965_bg_txpower_work(struct work_struct *work)
{
@@ -1932,15 +1243,15 @@ int iwl4965_alive_notify(struct iwl_priv *priv)
spin_lock_irqsave(&priv->lock, flags);
-#ifdef CONFIG_IWL4965_SENSITIVITY
+#ifdef CONFIG_IWL4965_RUN_TIME_CALIB
memset(&(priv->sensitivity_data), 0,
- sizeof(struct iwl4965_sensitivity_data));
+ sizeof(struct iwl_sensitivity_data));
memset(&(priv->chain_noise_data), 0,
- sizeof(struct iwl4965_chain_noise_data));
+ sizeof(struct iwl_chain_noise_data));
for (i = 0; i < NUM_RX_CHAINS; i++)
priv->chain_noise_data.delta_gain_code[i] =
CHAIN_NOISE_DELTA_GAIN_INIT_VAL;
-#endif /* CONFIG_IWL4965_SENSITIVITY*/
+#endif /* CONFIG_IWL4965_RUN_TIME_CALIB*/
ret = iwl_grab_nic_access(priv);
if (ret) {
spin_unlock_irqrestore(&priv->lock, flags);
@@ -2013,6 +1324,31 @@ int iwl4965_alive_notify(struct iwl_priv *priv)
return ret;
}
+#ifdef CONFIG_IWL4965_RUN_TIME_CALIB
+static struct iwl_sensitivity_ranges iwl4965_sensitivity = {
+ .min_nrg_cck = 97,
+ .max_nrg_cck = 0,
+
+ .auto_corr_min_ofdm = 85,
+ .auto_corr_min_ofdm_mrc = 170,
+ .auto_corr_min_ofdm_x1 = 105,
+ .auto_corr_min_ofdm_mrc_x1 = 220,
+
+ .auto_corr_max_ofdm = 120,
+ .auto_corr_max_ofdm_mrc = 210,
+ .auto_corr_max_ofdm_x1 = 140,
+ .auto_corr_max_ofdm_mrc_x1 = 270,
+
+ .auto_corr_min_cck = 125,
+ .auto_corr_max_cck = 200,
+ .auto_corr_min_cck_mrc = 200,
+ .auto_corr_max_cck_mrc = 400,
+
+ .nrg_th_cck = 100,
+ .nrg_th_ofdm = 100,
+};
+#endif
+
/**
* iwl4965_hw_set_hw_params
*
@@ -2044,6 +1380,9 @@ int iwl4965_hw_set_hw_params(struct iwl_priv *priv)
priv->hw_params.rx_chains_num = 2;
priv->hw_params.valid_tx_ant = (IWL_ANTENNA_MAIN | IWL_ANTENNA_AUX);
priv->hw_params.valid_rx_ant = (IWL_ANTENNA_MAIN | IWL_ANTENNA_AUX);
+#ifdef CONFIG_IWL4965_RUN_TIME_CALIB
+ priv->hw_params.sens = &iwl4965_sensitivity;
+#endif
return 0;
}
@@ -3202,7 +2541,7 @@ void iwl4965_set_rxon_chain(struct iwl_priv *priv)
/* Tell uCode which antennas are actually connected.
* Before first association, we assume all antennas are connected.
- * Just after first association, iwl4965_noise_calibration()
+ * Just after first association, iwl_chain_noise_calibration()
* checks which antennas actually *are* connected. */
priv->staging_rxon.rx_chain |=
cpu_to_le16(priv->valid_antenna << RXON_RX_CHAIN_VALID_POS);
@@ -3412,7 +2751,7 @@ void iwl4965_hw_rx_statistics(struct iwl_priv *priv, struct iwl4965_rx_mem_buffe
if (unlikely(!test_bit(STATUS_SCANNING, &priv->status)) &&
(pkt->hdr.cmd == STATISTICS_NOTIFICATION)) {
iwl4965_rx_calc_noise(priv);
-#ifdef CONFIG_IWL4965_SENSITIVITY
+#ifdef CONFIG_IWL4965_RUN_TIME_CALIB
queue_work(priv->workqueue, &priv->sensitivity_work);
#endif
}
@@ -4139,7 +3478,7 @@ static void iwl4965_rx_missed_beacon_notif(struct iwl_priv *priv,
struct iwl4965_rx_mem_buffer *rxb)
{
-#ifdef CONFIG_IWL4965_SENSITIVITY
+#ifdef CONFIG_IWL4965_RUN_TIME_CALIB
struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data;
struct iwl4965_missed_beacon_notif *missed_beacon;
@@ -4150,11 +3489,10 @@ static void iwl4965_rx_missed_beacon_notif(struct iwl_priv *priv,
le32_to_cpu(missed_beacon->total_missed_becons),
le32_to_cpu(missed_beacon->num_recvd_beacons),
le32_to_cpu(missed_beacon->num_expected_beacons));
- priv->sensitivity_data.state = IWL_SENS_CALIB_NEED_REINIT;
- if (unlikely(!test_bit(STATUS_SCANNING, &priv->status)))
- queue_work(priv->workqueue, &priv->sensitivity_work);
+ if (!test_bit(STATUS_SCANNING, &priv->status))
+ iwl_init_sensitivity(priv);
}
-#endif /*CONFIG_IWL4965_SENSITIVITY*/
+#endif /*CONFIG_IWL4965_RUN_TIME_CALIB*/
}
#ifdef CONFIG_IWL4965_HT
@@ -4930,7 +4268,7 @@ void iwl4965_hw_rx_handler_setup(struct iwl_priv *priv)
void iwl4965_hw_setup_deferred_work(struct iwl_priv *priv)
{
INIT_WORK(&priv->txpower_work, iwl4965_bg_txpower_work);
-#ifdef CONFIG_IWL4965_SENSITIVITY
+#ifdef CONFIG_IWL4965_RUN_TIME_CALIB
INIT_WORK(&priv->sensitivity_work, iwl4965_bg_sensitivity_work);
#endif
init_timer(&priv->statistics_periodic);
@@ -4952,6 +4290,10 @@ static struct iwl_hcmd_ops iwl4965_hcmd = {
static struct iwl_hcmd_utils_ops iwl4965_hcmd_utils = {
.enqueue_hcmd = iwl4965_enqueue_hcmd,
+#ifdef CONFIG_IWL4965_RUN_TIME_CALIB
+ .chain_noise_reset = iwl4965_chain_noise_reset,
+ .gain_computation = iwl4965_gain_computation,
+#endif
};
static struct iwl_lib_ops iwl4965_lib = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.h b/drivers/net/wireless/iwlwifi/iwl-4965.h
index 581b98556c8..d728dd837e9 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.h
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.h
@@ -566,6 +566,29 @@ struct iwl4965_ibss_seq {
struct list_head list;
};
+struct iwl_sensitivity_ranges {
+ u16 min_nrg_cck;
+ u16 max_nrg_cck;
+
+ u16 nrg_th_cck;
+ u16 nrg_th_ofdm;
+
+ u16 auto_corr_min_ofdm;
+ u16 auto_corr_min_ofdm_mrc;
+ u16 auto_corr_min_ofdm_x1;
+ u16 auto_corr_min_ofdm_mrc_x1;
+
+ u16 auto_corr_max_ofdm;
+ u16 auto_corr_max_ofdm_mrc;
+ u16 auto_corr_max_ofdm_x1;
+ u16 auto_corr_max_ofdm_mrc_x1;
+
+ u16 auto_corr_max_cck;
+ u16 auto_corr_max_cck_mrc;
+ u16 auto_corr_min_cck;
+ u16 auto_corr_min_cck_mrc;
+};
+
/**
* struct iwl_hw_params
* @max_txq_num: Max # Tx queues supported
@@ -576,6 +599,7 @@ struct iwl4965_ibss_seq {
* @max_rxq_log: Log-base-2 of max_rxq_size
* @max_stations:
* @bcast_sta_id:
+ * @struct iwl_sensitivity_ranges: range of sensitivity values
*/
struct iwl_hw_params {
u16 max_txq_num;
@@ -590,6 +614,9 @@ struct iwl_hw_params {
u32 max_pkt_size;
u8 max_stations;
u8 bcast_sta_id;
+#ifdef CONFIG_IWLWIFI_RUN_TIME_CALIB
+ const struct iwl_sensitivity_ranges *sens;
+#endif
};
#define HT_SHORT_GI_20MHZ_ONLY (1 << 0)
@@ -732,9 +759,6 @@ extern void iwl4965_add_station(struct iwl_priv *priv, const u8 *addr,
extern void iwl4965_set_rxon_chain(struct iwl_priv *priv);
extern int iwl4965_alive_notify(struct iwl_priv *priv);
extern void iwl4965_update_rate_scaling(struct iwl_priv *priv, u8 mode);
-extern void iwl4965_chain_noise_reset(struct iwl_priv *priv);
-extern void iwl4965_init_sensitivity(struct iwl_priv *priv, u8 flags,
- u8 force);
extern void iwl4965_rf_kill_ct_config(struct iwl_priv *priv);
extern void iwl4965_hwrate_to_tx_control(struct iwl_priv *priv,
u32 rate_n_flags,
@@ -818,23 +842,8 @@ struct iwl4965_lq_mngr {
#define MAX_FA_CCK 50
#define MIN_FA_CCK 5
-#define NRG_MIN_CCK 97
-#define NRG_MAX_CCK 0
-
-#define AUTO_CORR_MIN_OFDM 85
-#define AUTO_CORR_MIN_OFDM_MRC 170
-#define AUTO_CORR_MIN_OFDM_X1 105
-#define AUTO_CORR_MIN_OFDM_MRC_X1 220
-#define AUTO_CORR_MAX_OFDM 120
-#define AUTO_CORR_MAX_OFDM_MRC 210
-#define AUTO_CORR_MAX_OFDM_X1 140
-#define AUTO_CORR_MAX_OFDM_MRC_X1 270
#define AUTO_CORR_STEP_OFDM 1
-#define AUTO_CORR_MIN_CCK (125)
-#define AUTO_CORR_MAX_CCK (200)
-#define AUTO_CORR_MIN_CCK_MRC 200
-#define AUTO_CORR_MAX_CCK_MRC 400
#define AUTO_CORR_STEP_CCK 3
#define AUTO_CORR_MAX_TH_CCK 160
@@ -865,11 +874,6 @@ enum iwl4965_chain_noise_state {
IWL_CHAIN_NOISE_CALIBRATED = 2,
};
-enum iwl4965_sensitivity_state {
- IWL_SENS_CALIB_ALLOWED = 0,
- IWL_SENS_CALIB_NEED_REINIT = 1,
-};
-
enum iwl4965_calib_enabled_state {
IWL_CALIB_DISABLED = 0, /* must be 0 */
IWL_CALIB_ENABLED = 1,
@@ -884,8 +888,9 @@ struct statistics_general_data {
u32 beacon_energy_c;
};
+#ifdef CONFIG_IWLWIFI_RUN_TIME_CALIB
/* Sensitivity calib data */
-struct iwl4965_sensitivity_data {
+struct iwl_sensitivity_data {
u32 auto_corr_ofdm;
u32 auto_corr_ofdm_mrc;
u32 auto_corr_ofdm_x1;
@@ -909,12 +914,10 @@ struct iwl4965_sensitivity_data {
s32 nrg_auto_corr_silence_diff;
u32 num_in_cck_no_fa;
u32 nrg_th_ofdm;
-
- u8 state;
};
/* Chain noise (differential Rx gain) calib data */
-struct iwl4965_chain_noise_data {
+struct iwl_chain_noise_data {
u8 state;
u16 beacon_count;
u32 chain_noise_a;
@@ -927,6 +930,7 @@ struct iwl4965_chain_noise_data {
u8 delta_gain_code[NUM_RX_CHAINS];
u8 radio_write;
};
+#endif /* CONFIG_IWLWIFI_RUN_TIME_CALIB */
#define EEPROM_SEM_TIMEOUT 10 /* milliseconds */
#define EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */
@@ -1051,12 +1055,12 @@ struct iwl_priv {
u8 assoc_station_added;
u8 use_ant_b_for_management_frame; /* Tx antenna selection */
u8 valid_antenna; /* Bit mask of antennas actually connected */
-#ifdef CONFIG_IWL4965_SENSITIVITY
- struct iwl4965_sensitivity_data sensitivity_data;
- struct iwl4965_chain_noise_data chain_noise_data;
u8 start_calib;
+#ifdef CONFIG_IWLWIFI_RUN_TIME_CALIB
+ struct iwl_sensitivity_data sensitivity_data;
+ struct iwl_chain_noise_data chain_noise_data;
__le16 sensitivity_tbl[HD_TABLE_SIZE];
-#endif /*CONFIG_IWL4965_SENSITIVITY*/
+#endif /*CONFIG_IWLWIFI_RUN_TIME_CALIB*/
#ifdef CONFIG_IWL4965_HT
struct iwl_ht_info current_ht_config;
@@ -1206,7 +1210,7 @@ struct iwl_priv {
#endif /* CONFIG_IWLWIFI_DEBUG */
struct work_struct txpower_work;
-#ifdef CONFIG_IWL4965_SENSITIVITY
+#ifdef CONFIG_IWL4965_RUN_TIME_CALIB
struct work_struct sensitivity_work;
#endif
struct timer_list statistics_periodic;
diff --git a/drivers/net/wireless/iwlwifi/iwl-calib.c b/drivers/net/wireless/iwlwifi/iwl-calib.c
new file mode 100644
index 00000000000..16213b05ed9
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-calib.c
@@ -0,0 +1,778 @@
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ * Tomas Winkler <tomas.winkler@intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *****************************************************************************/
+
+#include <linux/kernel.h>
+#include <net/mac80211.h>
+
+#include "iwl-4965.h"
+#include "iwl-core.h"
+#include "iwl-calib.h"
+#include "iwl-eeprom.h"
+
+/* "false alarms" are signals that our DSP tries to lock onto,
+ * but then determines that they are either noise, or transmissions
+ * from a distant wireless network (also "noise", really) that get
+ * "stepped on" by stronger transmissions within our own network.
+ * This algorithm attempts to set a sensitivity level that is high
+ * enough to receive all of our own network traffic, but not so
+ * high that our DSP gets too busy trying to lock onto non-network
+ * activity/noise. */
+static int iwl_sens_energy_cck(struct iwl_priv *priv,
+ u32 norm_fa,
+ u32 rx_enable_time,
+ struct statistics_general_data *rx_info)
+{
+ u32 max_nrg_cck = 0;
+ int i = 0;
+ u8 max_silence_rssi = 0;
+ u32 silence_ref = 0;
+ u8 silence_rssi_a = 0;
+ u8 silence_rssi_b = 0;
+ u8 silence_rssi_c = 0;
+ u32 val;
+
+ /* "false_alarms" values below are cross-multiplications to assess the
+ * numbers of false alarms within the measured period of actual Rx
+ * (Rx is off when we're txing), vs the min/max expected false alarms
+ * (some should be expected if rx is sensitive enough) in a
+ * hypothetical listening period of 200 time units (TU), 204.8 msec:
+ *
+ * MIN_FA/fixed-time < false_alarms/actual-rx-time < MAX_FA/beacon-time
+ *
+ * */
+ u32 false_alarms = norm_fa * 200 * 1024;
+ u32 max_false_alarms = MAX_FA_CCK * rx_enable_time;
+ u32 min_false_alarms = MIN_FA_CCK * rx_enable_time;
+ struct iwl_sensitivity_data *data = NULL;
+ const struct iwl_sensitivity_ranges *ranges = priv->hw_params.sens;
+
+ data = &(priv->sensitivity_data);
+
+ data->nrg_auto_corr_silence_diff = 0;
+
+ /* Find max silence rssi among all 3 receivers.
+ * This is background noise, which may include transmissions from other
+ * networks, measured during silence before our network's beacon */
+ silence_rssi_a = (u8)((rx_info->beacon_silence_rssi_a &
+ ALL_BAND_FILTER) >> 8);
+ silence_rssi_b = (u8)((rx_info->beacon_silence_rssi_b &
+ ALL_BAND_FILTER) >> 8);
+ silence_rssi_c = (u8)((rx_info->beacon_silence_rssi_c &
+ ALL_BAND_FILTER) >> 8);
+
+ val = max(silence_rssi_b, silence_rssi_c);
+ max_silence_rssi = max(silence_rssi_a, (u8) val);
+
+ /* Store silence rssi in 20-beacon history table */
+ data->nrg_silence_rssi[data->nrg_silence_idx] = max_silence_rssi;
+ data->nrg_silence_idx++;
+ if (data->nrg_silence_idx >= NRG_NUM_PREV_STAT_L)
+ data->nrg_silence_idx = 0;
+
+ /* Find max silence rssi across 20 beacon history */
+ for (i = 0; i < NRG_NUM_PREV_STAT_L; i++) {
+ val = data->nrg_silence_rssi[i];
+ silence_ref = max(silence_ref, val);
+ }
+ IWL_DEBUG_CALIB("silence a %u, b %u, c %u, 20-bcn max %u\n",
+ silence_rssi_a, silence_rssi_b, silence_rssi_c,
+ silence_ref);
+
+ /* Find max rx energy (min value!) among all 3 receivers,
+ * measured during beacon frame.
+ * Save it in 10-beacon history table. */
+ i = data->nrg_energy_idx;
+ val = min(rx_info->beacon_energy_b, rx_info->beacon_energy_c);
+ data->nrg_value[i] = min(rx_info->beacon_energy_a, val);
+
+ data->nrg_energy_idx++;
+ if (data->nrg_energy_idx >= 10)
+ data->nrg_energy_idx = 0;
+
+ /* Find min rx energy (max value) across 10 beacon history.
+ * This is the minimum signal level that we want to receive well.
+ * Add backoff (margin so we don't miss slightly lower energy frames).
+ * This establishes an upper bound (min value) for energy threshold. */
+ max_nrg_cck = data->nrg_value[0];
+ for (i = 1; i < 10; i++)
+ max_nrg_cck = (u32) max(max_nrg_cck, (data->nrg_value[i]));
+ max_nrg_cck += 6;
+
+ IWL_DEBUG_CALIB("rx energy a %u, b %u, c %u, 10-bcn max/min %u\n",
+ rx_info->beacon_energy_a, rx_info->beacon_energy_b,
+ rx_info->beacon_energy_c, max_nrg_cck - 6);
+
+ /* Count number of consecutive beacons with fewer-than-desired
+ * false alarms. */
+ if (false_alarms < min_false_alarms)
+ data->num_in_cck_no_fa++;
+ else
+ data->num_in_cck_no_fa = 0;
+ IWL_DEBUG_CALIB("consecutive bcns with few false alarms = %u\n",
+ data->num_in_cck_no_fa);
+
+ /* If we got too many false alarms this time, reduce sensitivity */
+ if ((false_alarms > max_false_alarms) &&
+ (data->auto_corr_cck > AUTO_CORR_MAX_TH_CCK)) {
+ IWL_DEBUG_CALIB("norm FA %u > max FA %u\n",
+ false_alarms, max_false_alarms);
+ IWL_DEBUG_CALIB("... reducing sensitivity\n");
+ data->nrg_curr_state = IWL_FA_TOO_MANY;
+ /* Store for "fewer than desired" on later beacon */
+ data->nrg_silence_ref = silence_ref;
+
+ /* increase energy threshold (reduce nrg value)
+ * to decrease sensitivity */
+ if (data->nrg_th_cck >
+ (ranges->max_nrg_cck + NRG_STEP_CCK))
+ data->nrg_th_cck = data->nrg_th_cck
+ - NRG_STEP_CCK;
+ else
+ data->nrg_th_cck = ranges->max_nrg_cck;
+ /* Else if we got fewer than desired, increase sensitivity */
+ } else if (false_alarms < min_false_alarms) {
+ data->nrg_curr_state = IWL_FA_TOO_FEW;
+
+ /* Compare silence level with silence level for most recent
+ * healthy number or too many false alarms */
+ data->nrg_auto_corr_silence_diff = (s32)data->nrg_silence_ref -
+ (s32)silence_ref;
+
+ IWL_DEBUG_CALIB("norm FA %u < min FA %u, silence diff %d\n",
+ false_alarms, min_false_alarms,
+ data->nrg_auto_corr_silence_diff);
+
+ /* Increase value to increase sensitivity, but only if:
+ * 1a) previous beacon did *not* have *too many* false alarms
+ * 1b) AND there's a significant difference in Rx levels
+ * from a previous beacon with too many, or healthy # FAs
+ * OR 2) We've seen a lot of beacons (100) with too few
+ * false alarms */
+ if ((data->nrg_prev_state != IWL_FA_TOO_MANY) &&
+ ((data->nrg_auto_corr_silence_diff > NRG_DIFF) ||
+ (data->num_in_cck_no_fa > MAX_NUMBER_CCK_NO_FA))) {
+
+ IWL_DEBUG_CALIB("... increasing sensitivity\n");
+ /* Increase nrg value to increase sensitivity */
+ val = data->nrg_th_cck + NRG_STEP_CCK;
+ data->nrg_th_cck = min((u32)ranges->min_nrg_cck, val);
+ } else {
+ IWL_DEBUG_CALIB("... but not changing sensitivity\n");
+ }
+
+ /* Else we got a healthy number of false alarms, keep status quo */
+ } else {
+ IWL_DEBUG_CALIB(" FA in safe zone\n");
+ data->nrg_curr_state = IWL_FA_GOOD_RANGE;
+
+ /* Store for use in "fewer than desired" with later beacon */
+ data->nrg_silence_ref = silence_ref;
+
+ /* If previous beacon had too many false alarms,
+ * give it some extra margin by reducing sensitivity again
+ * (but don't go below measured energy of desired Rx) */
+ if (IWL_FA_TOO_MANY == data->nrg_prev_state) {
+ IWL_DEBUG_CALIB("... increasing margin\n");
+ if (data->nrg_th_cck > (max_nrg_cck + NRG_MARGIN))
+ data->nrg_th_cck -= NRG_MARGIN;
+ else
+ data->nrg_th_cck = max_nrg_cck;
+ }
+ }
+
+ /* Make sure the energy threshold does not go above the measured
+ * energy of the desired Rx signals (reduced by backoff margin),
+ * or else we might start missing Rx frames.
+ * Lower value is higher energy, so we use max()!
+ */
+ data->nrg_th_cck = max(max_nrg_cck, data->nrg_th_cck);
+ IWL_DEBUG_CALIB("new nrg_th_cck %u\n", data->nrg_th_cck);
+
+ data->nrg_prev_state = data->nrg_curr_state;
+
+ /* Auto-correlation CCK algorithm */
+ if (false_alarms > min_false_alarms) {
+
+ /* increase auto_corr values to decrease sensitivity
+ * so the DSP won't be disturbed by the noise
+ */
+ if (data->auto_corr_cck < AUTO_CORR_MAX_TH_CCK)
+ data->auto_corr_cck = AUTO_CORR_MAX_TH_CCK + 1;
+ else {
+ val = data->auto_corr_cck + AUTO_CORR_STEP_CCK;
+ data->auto_corr_cck =
+ min((u32)ranges->auto_corr_max_cck, val);
+ }
+ val = data->auto_corr_cck_mrc + AUTO_CORR_STEP_CCK;
+ data->auto_corr_cck_mrc =
+ min((u32)ranges->auto_corr_max_cck_mrc, val);
+ } else if ((false_alarms < min_false_alarms) &&
+ ((data->nrg_auto_corr_silence_diff > NRG_DIFF) ||
+ (data->num_in_cck_no_fa > MAX_NUMBER_CCK_NO_FA))) {
+
+ /* Decrease auto_corr values to increase sensitivity */
+ val = data->auto_corr_cck - AUTO_CORR_STEP_CCK;
+ data->auto_corr_cck =
+ max((u32)ranges->auto_corr_min_cck, val);
+ val = data->auto_corr_cck_mrc - AUTO_CORR_STEP_CCK;
+ data->auto_corr_cck_mrc =
+ max((u32)ranges->auto_corr_min_cck_mrc, val);
+ }
+
+ return 0;
+}
+
+
+static int iwl_sens_auto_corr_ofdm(struct iwl_priv *priv,
+ u32 norm_fa,
+ u32 rx_enable_time)
+{
+ u32 val;
+ u32 false_alarms = norm_fa * 200 * 1024;
+ u32 max_false_alarms = MAX_FA_OFDM * rx_enable_time;
+ u32 min_false_alarms = MIN_FA_OFDM * rx_enable_time;
+ struct iwl_sensitivity_data *data = NULL;
+ const struct iwl_sensitivity_ranges *ranges = priv->hw_params.sens;
+
+ data = &(priv->sensitivity_data);
+
+ /* If we got too many false alarms this time, reduce sensitivity */
+ if (false_alarms > max_false_alarms) {
+
+ IWL_DEBUG_CALIB("norm FA %u > max FA %u)\n",
+ false_alarms, max_false_alarms);
+
+ val = data->auto_corr_ofdm + AUTO_CORR_STEP_OFDM;
+ data->auto_corr_ofdm =
+ min((u32)ranges->auto_corr_max_ofdm, val);
+
+ val = data->auto_corr_ofdm_mrc + AUTO_CORR_STEP_OFDM;
+ data->auto_corr_ofdm_mrc =
+ min((u32)ranges->auto_corr_max_ofdm_mrc, val);
+
+ val = data->auto_corr_ofdm_x1 + AUTO_CORR_STEP_OFDM;
+ data->auto_corr_ofdm_x1 =
+ min((u32)ranges->auto_corr_max_ofdm_x1, val);
+
+ val = data->auto_corr_ofdm_mrc_x1 + AUTO_CORR_STEP_OFDM;
+ data->auto_corr_ofdm_mrc_x1 =
+ min((u32)ranges->auto_corr_max_ofdm_mrc_x1, val);
+ }
+
+ /* Else if we got fewer than desired, increase sensitivity */
+ else if (false_alarms < min_false_alarms) {
+
+ IWL_DEBUG_CALIB("norm FA %u < min FA %u\n",
+ false_alarms, min_false_alarms);
+
+ val = data->auto_corr_ofdm - AUTO_CORR_STEP_OFDM;
+ data->auto_corr_ofdm =
+ max((u32)ranges->auto_corr_min_ofdm, val);
+
+ val = data->auto_corr_ofdm_mrc - AUTO_CORR_STEP_OFDM;
+ data->auto_corr_ofdm_mrc =
+ max((u32)ranges->auto_corr_min_ofdm_mrc, val);
+
+ val = data->auto_corr_ofdm_x1 - AUTO_CORR_STEP_OFDM;
+ data->auto_corr_ofdm_x1 =
+ max((u32)ranges->auto_corr_min_ofdm_x1, val);
+
+ val = data->auto_corr_ofdm_mrc_x1 - AUTO_CORR_STEP_OFDM;
+ data->auto_corr_ofdm_mrc_x1 =
+ max((u32)ranges->auto_corr_min_ofdm_mrc_x1, val);
+ } else {
+ IWL_DEBUG_CALIB("min FA %u < norm FA %u < max FA %u OK\n",
+ min_false_alarms, false_alarms, max_false_alarms);
+ }
+ return 0;
+}
+
+/* Prepare a SENSITIVITY_CMD, send to uCode if values have changed */
+static int iwl_sensitivity_write(struct iwl_priv *priv)
+{
+ int ret = 0;
+ struct iwl_sensitivity_cmd cmd ;
+ struct iwl_sensitivity_data *data = NULL;
+ struct iwl_host_cmd cmd_out = {
+ .id = SENSITIVITY_CMD,
+ .len = sizeof(struct iwl_sensitivity_cmd),
+ .meta.flags = CMD_ASYNC,
+ .data = &cmd,
+ };
+
+ data = &(priv->sensitivity_data);
+
+ memset(&cmd, 0, sizeof(cmd));
+
+ cmd.table[HD_AUTO_CORR32_X4_TH_ADD_MIN_INDEX] =
+ cpu_to_le16((u16)data->auto_corr_ofdm);
+ cmd.table[HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_INDEX] =
+ cpu_to_le16((u16)data->auto_corr_ofdm_mrc);
+ cmd.table[HD_AUTO_CORR32_X1_TH_ADD_MIN_INDEX] =
+ cpu_to_le16((u16)data->auto_corr_ofdm_x1);
+ cmd.table[HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_INDEX] =
+ cpu_to_le16((u16)data->auto_corr_ofdm_mrc_x1);
+
+ cmd.table[HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX] =
+ cpu_to_le16((u16)data->auto_corr_cck);
+ cmd.table[HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX] =
+ cpu_to_le16((u16)data->auto_corr_cck_mrc);
+
+ cmd.table[HD_MIN_ENERGY_CCK_DET_INDEX] =
+ cpu_to_le16((u16)data->nrg_th_cck);
+ cmd.table[HD_MIN_ENERGY_OFDM_DET_INDEX] =
+ cpu_to_le16((u16)data->nrg_th_ofdm);
+
+ cmd.table[HD_BARKER_CORR_TH_ADD_MIN_INDEX] =
+ __constant_cpu_to_le16(190);
+ cmd.table[HD_BARKER_CORR_TH_ADD_MIN_MRC_INDEX] =
+ __constant_cpu_to_le16(390);
+ cmd.table[HD_OFDM_ENERGY_TH_IN_INDEX] =
+ __constant_cpu_to_le16(62);
+
+ IWL_DEBUG_CALIB("ofdm: ac %u mrc %u x1 %u mrc_x1 %u thresh %u\n",
+ data->auto_corr_ofdm, data->auto_corr_ofdm_mrc,
+ data->auto_corr_ofdm_x1, data->auto_corr_ofdm_mrc_x1,
+ data->nrg_th_ofdm);
+
+ IWL_DEBUG_CALIB("cck: ac %u mrc %u thresh %u\n",
+ data->auto_corr_cck, data->auto_corr_cck_mrc,
+ data->nrg_th_cck);
+
+ /* Update uCode's "work" table, and copy it to DSP */
+ cmd.control = SENSITIVITY_CMD_CONTROL_WORK_TABLE;
+
+ /* Don't send command to uCode if nothing has changed */
+ if (!memcmp(&cmd.table[0], &(priv->sensitivity_tbl[0]),
+ sizeof(u16)*HD_TABLE_SIZE)) {
+ IWL_DEBUG_CALIB("No change in SENSITIVITY_CMD\n");
+ return 0;
+ }
+
+ /* Copy table for comparison next time */
+ memcpy(&(priv->sensitivity_tbl[0]), &(cmd.table[0]),
+ sizeof(u16)*HD_TABLE_SIZE);
+
+ ret = iwl_send_cmd(priv, &cmd_out);
+ if (ret)
+ IWL_ERROR("SENSITIVITY_CMD failed\n");
+
+ return ret;
+}
+
+void iwl_init_sensitivity(struct iwl_priv *priv)
+{
+ int ret = 0;
+ int i;
+ struct iwl_sensitivity_data *data = NULL;
+ const struct iwl_sensitivity_ranges *ranges = priv->hw_params.sens;
+
+ IWL_DEBUG_CALIB("Start iwl_init_sensitivity\n");
+
+ /* Clear driver's sensitivity algo data */
+ data = &(priv->sensitivity_data);
+
+ if (ranges == NULL)
+ /* can happen if IWLWIFI_RUN_TIME_CALIB is selected
+ * but no IWLXXXX_RUN_TIME_CALIB for specific is selected */
+ return;
+
+ memset(data, 0, sizeof(struct iwl_sensitivity_data));
+
+ data->num_in_cck_no_fa = 0;
+ data->nrg_curr_state = IWL_FA_TOO_MANY;
+ data->nrg_prev_state = IWL_FA_TOO_MANY;
+ data->nrg_silence_ref = 0;
+ data->nrg_silence_idx = 0;
+ data->nrg_energy_idx = 0;
+
+ for (i = 0; i < 10; i++)
+ data->nrg_value[i] = 0;
+
+ for (i = 0; i < NRG_NUM_PREV_STAT_L; i++)
+ data->nrg_silence_rssi[i] = 0;
+
+ data->auto_corr_ofdm = 90;
+ data->auto_corr_ofdm_mrc = ranges->auto_corr_min_ofdm_mrc;
+ data->auto_corr_ofdm_x1 = ranges->auto_corr_min_ofdm_x1;
+ data->auto_corr_ofdm_mrc_x1 = ranges->auto_corr_min_ofdm_mrc_x1;
+ data->auto_corr_cck = AUTO_CORR_CCK_MIN_VAL_DEF;
+ data->auto_corr_cck_mrc = ranges->auto_corr_min_cck_mrc;
+ data->nrg_th_cck = ranges->nrg_th_cck;
+ data->nrg_th_ofdm = ranges->nrg_th_ofdm;
+
+ data->last_bad_plcp_cnt_ofdm = 0;
+ data->last_fa_cnt_ofdm = 0;
+ data->last_bad_plcp_cnt_cck = 0;
+ data->last_fa_cnt_cck = 0;
+
+ ret |= iwl_sensitivity_write(priv);
+ IWL_DEBUG_CALIB("<<return 0x%X\n", ret);
+}
+EXPORT_SYMBOL(iwl_init_sensitivity);
+
+void iwl_sensitivity_calibration(struct iwl_priv *priv,
+ struct iwl4965_notif_statistics *resp)
+{
+ u32 rx_enable_time;
+ u32 fa_cck;
+ u32 fa_ofdm;
+ u32 bad_plcp_cck;
+ u32 bad_plcp_ofdm;
+ u32 norm_fa_ofdm;
+ u32 norm_fa_cck;
+ struct iwl_sensitivity_data *data = NULL;
+ struct statistics_rx_non_phy *rx_info = &(resp->rx.general);
+ struct statistics_rx *statistics = &(resp->rx);
+ unsigned long flags;
+ struct statistics_general_data statis;
+
+ data = &(priv->sensitivity_data);
+
+ if (!iwl_is_associated(priv)) {
+ IWL_DEBUG_CALIB("<< - not associated\n");
+ return;
+ }
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (rx_info->interference_data_flag != INTERFERENCE_DATA_AVAILABLE) {
+ IWL_DEBUG_CALIB("<< invalid data.\n");
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return;
+ }
+
+ /* Extract Statistics: */
+ rx_enable_time = le32_to_cpu(rx_info->channel_load);
+ fa_cck = le32_to_cpu(statistics->cck.false_alarm_cnt);
+ fa_ofdm = le32_to_cpu(statistics->ofdm.false_alarm_cnt);
+ bad_plcp_cck = le32_to_cpu(statistics->cck.plcp_err);
+ bad_plcp_ofdm = le32_to_cpu(statistics->ofdm.plcp_err);
+
+ statis.beacon_silence_rssi_a =
+ le32_to_cpu(statistics->general.beacon_silence_rssi_a);
+ statis.beacon_silence_rssi_b =
+ le32_to_cpu(statistics->general.beacon_silence_rssi_b);
+ statis.beacon_silence_rssi_c =
+ le32_to_cpu(statistics->general.beacon_silence_rssi_c);
+ statis.beacon_energy_a =
+ le32_to_cpu(statistics->general.beacon_energy_a);
+ statis.beacon_energy_b =
+ le32_to_cpu(statistics->general.beacon_energy_b);
+ statis.beacon_energy_c =
+ le32_to_cpu(statistics->general.beacon_energy_c);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ IWL_DEBUG_CALIB("rx_enable_time = %u usecs\n", rx_enable_time);
+
+ if (!rx_enable_time) {
+ IWL_DEBUG_CALIB("<< RX Enable Time == 0! \n");
+ return;
+ }
+
+ /* These statistics increase monotonically, and do not reset
+ * at each beacon. Calculate difference from last value, or just
+ * use the new statistics value if it has reset or wrapped around. */
+ if (data->last_bad_plcp_cnt_cck > bad_plcp_cck)
+ data->last_bad_plcp_cnt_cck = bad_plcp_cck;
+ else {
+ bad_plcp_cck -= data->last_bad_plcp_cnt_cck;
+ data->last_bad_plcp_cnt_cck += bad_plcp_cck;
+ }
+
+ if (data->last_bad_plcp_cnt_ofdm > bad_plcp_ofdm)
+ data->last_bad_plcp_cnt_ofdm = bad_plcp_ofdm;
+ else {
+ bad_plcp_ofdm -= data->last_bad_plcp_cnt_ofdm;
+ data->last_bad_plcp_cnt_ofdm += bad_plcp_ofdm;
+ }
+
+ if (data->last_fa_cnt_ofdm > fa_ofdm)
+ data->last_fa_cnt_ofdm = fa_ofdm;
+ else {
+ fa_ofdm -= data->last_fa_cnt_ofdm;
+ data->last_fa_cnt_ofdm += fa_ofdm;
+ }
+
+ if (data->last_fa_cnt_cck > fa_cck)
+ data->last_fa_cnt_cck = fa_cck;
+ else {
+ fa_cck -= data->last_fa_cnt_cck;
+ data->last_fa_cnt_cck += fa_cck;
+ }
+
+ /* Total aborted signal locks */
+ norm_fa_ofdm = fa_ofdm + bad_plcp_ofdm;
+ norm_fa_cck = fa_cck + bad_plcp_cck;
+
+ IWL_DEBUG_CALIB("cck: fa %u badp %u ofdm: fa %u badp %u\n", fa_cck,
+ bad_plcp_cck, fa_ofdm, bad_plcp_ofdm);
+
+ iwl_sens_auto_corr_ofdm(priv, norm_fa_ofdm, rx_enable_time);
+ iwl_sens_energy_cck(priv, norm_fa_cck, rx_enable_time, &statis);
+ iwl_sensitivity_write(priv);
+
+ return;
+}
+EXPORT_SYMBOL(iwl_sensitivity_calibration);
+
+/*
+ * Accumulate 20 beacons of signal and noise statistics for each of
+ * 3 receivers/antennas/rx-chains, then figure out:
+ * 1) Which antennas are connected.
+ * 2) Differential rx gain settings to balance the 3 receivers.
+ */
+void iwl_chain_noise_calibration(struct iwl_priv *priv,
+ struct iwl4965_notif_statistics *stat_resp)
+{
+ struct iwl_chain_noise_data *data = NULL;
+
+ u32 chain_noise_a;
+ u32 chain_noise_b;
+ u32 chain_noise_c;
+ u32 chain_sig_a;
+ u32 chain_sig_b;
+ u32 chain_sig_c;
+ u32 average_sig[NUM_RX_CHAINS] = {INITIALIZATION_VALUE};
+ u32 average_noise[NUM_RX_CHAINS] = {INITIALIZATION_VALUE};
+ u32 max_average_sig;
+ u16 max_average_sig_antenna_i;
+ u32 min_average_noise = MIN_AVERAGE_NOISE_MAX_VALUE;
+ u16 min_average_noise_antenna_i = INITIALIZATION_VALUE;
+ u16 i = 0;
+ u16 rxon_chnum = INITIALIZATION_VALUE;
+ u16 stat_chnum = INITIALIZATION_VALUE;
+ u8 rxon_band24;
+ u8 stat_band24;
+ u32 active_chains = 0;
+ u8 num_tx_chains;
+ unsigned long flags;
+ struct statistics_rx_non_phy *rx_info = &(stat_resp->rx.general);
+
+ data = &(priv->chain_noise_data);
+
+ /* Accumulate just the first 20 beacons after the first association,
+ * then we're done forever. */
+ if (data->state != IWL_CHAIN_NOISE_ACCUMULATE) {
+ if (data->state == IWL_CHAIN_NOISE_ALIVE)
+ IWL_DEBUG_CALIB("Wait for noise calib reset\n");
+ return;
+ }
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (rx_info->interference_data_flag != INTERFERENCE_DATA_AVAILABLE) {
+ IWL_DEBUG_CALIB(" << Interference data unavailable\n");
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return;
+ }
+
+ rxon_band24 = !!(priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK);
+ rxon_chnum = le16_to_cpu(priv->staging_rxon.channel);
+ stat_band24 = !!(stat_resp->flag & STATISTICS_REPLY_FLG_BAND_24G_MSK);
+ stat_chnum = le32_to_cpu(stat_resp->flag) >> 16;
+
+ /* Make sure we accumulate data for just the associated channel
+ * (even if scanning). */
+ if ((rxon_chnum != stat_chnum) || (rxon_band24 != stat_band24)) {
+ IWL_DEBUG_CALIB("Stats not from chan=%d, band24=%d\n",
+ rxon_chnum, rxon_band24);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return;
+ }
+
+ /* Accumulate beacon statistics values across 20 beacons */
+ chain_noise_a = le32_to_cpu(rx_info->beacon_silence_rssi_a) &
+ IN_BAND_FILTER;
+ chain_noise_b = le32_to_cpu(rx_info->beacon_silence_rssi_b) &
+ IN_BAND_FILTER;
+ chain_noise_c = le32_to_cpu(rx_info->beacon_silence_rssi_c) &
+ IN_BAND_FILTER;
+
+ chain_sig_a = le32_to_cpu(rx_info->beacon_rssi_a) & IN_BAND_FILTER;
+ chain_sig_b = le32_to_cpu(rx_info->beacon_rssi_b) & IN_BAND_FILTER;
+ chain_sig_c = le32_to_cpu(rx_info->beacon_rssi_c) & IN_BAND_FILTER;
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ data->beacon_count++;
+
+ data->chain_noise_a = (chain_noise_a + data->chain_noise_a);
+ data->chain_noise_b = (chain_noise_b + data->chain_noise_b);
+ data->chain_noise_c = (chain_noise_c + data->chain_noise_c);
+
+ data->chain_signal_a = (chain_sig_a + data->chain_signal_a);
+ data->chain_signal_b = (chain_sig_b + data->chain_signal_b);
+ data->chain_signal_c = (chain_sig_c + data->chain_signal_c);
+
+ IWL_DEBUG_CALIB("chan=%d, band24=%d, beacon=%d\n",
+ rxon_chnum, rxon_band24, data->beacon_count);
+ IWL_DEBUG_CALIB("chain_sig: a %d b %d c %d\n",
+ chain_sig_a, chain_sig_b, chain_sig_c);
+ IWL_DEBUG_CALIB("chain_noise: a %d b %d c %d\n",
+ chain_noise_a, chain_noise_b, chain_noise_c);
+
+ /* If this is the 20th beacon, determine:
+ * 1) Disconnected antennas (using signal strengths)
+ * 2) Differential gain (using silence noise) to balance receivers */
+ if (data->beacon_count != CAL_NUM_OF_BEACONS)
+ return;
+
+ /* Analyze signal for disconnected antenna */
+ average_sig[0] = (data->chain_signal_a) / CAL_NUM_OF_BEACONS;
+ average_sig[1] = (data->chain_signal_b) / CAL_NUM_OF_BEACONS;
+ average_sig[2] = (data->chain_signal_c) / CAL_NUM_OF_BEACONS;
+
+ if (average_sig[0] >= average_sig[1]) {
+ max_average_sig = average_sig[0];
+ max_average_sig_antenna_i = 0;
+ active_chains = (1 << max_average_sig_antenna_i);
+ } else {
+ max_average_sig = average_sig[1];
+ max_average_sig_antenna_i = 1;
+ active_chains = (1 << max_average_sig_antenna_i);
+ }
+
+ if (average_sig[2] >= max_average_sig) {
+ max_average_sig = average_sig[2];
+ max_average_sig_antenna_i = 2;
+ active_chains = (1 << max_average_sig_antenna_i);
+ }
+
+ IWL_DEBUG_CALIB("average_sig: a %d b %d c %d\n",
+ average_sig[0], average_sig[1], average_sig[2]);
+ IWL_DEBUG_CALIB("max_average_sig = %d, antenna %d\n",
+ max_average_sig, max_average_sig_antenna_i);
+
+ /* Compare signal strengths for all 3 receivers. */
+ for (i = 0; i < NUM_RX_CHAINS; i++) {
+ if (i != max_average_sig_antenna_i) {
+ s32 rssi_delta = (max_average_sig - average_sig[i]);
+
+ /* If signal is very weak, compared with
+ * strongest, mark it as disconnected. */
+ if (rssi_delta > MAXIMUM_ALLOWED_PATHLOSS)
+ data->disconn_array[i] = 1;
+ else
+ active_chains |= (1 << i);
+ IWL_DEBUG_CALIB("i = %d rssiDelta = %d "
+ "disconn_array[i] = %d\n",
+ i, rssi_delta, data->disconn_array[i]);
+ }
+ }
+
+ num_tx_chains = 0;
+ for (i = 0; i < NUM_RX_CHAINS; i++) {
+ /* loops on all the bits of
+ * priv->hw_setting.valid_tx_ant */
+ u8 ant_msk = (1 << i);
+ if (!(priv->hw_params.valid_tx_ant & ant_msk))
+ continue;
+
+ num_tx_chains++;
+ if (data->disconn_array[i] == 0)
+ /* there is a Tx antenna connected */
+ break;
+ if (num_tx_chains == priv->hw_params.tx_chains_num &&
+ data->disconn_array[i]) {
+ /* This is the last TX antenna and is also
+ * disconnected connect it anyway */
+ data->disconn_array[i] = 0;
+ active_chains |= ant_msk;
+ IWL_DEBUG_CALIB("All Tx chains are disconnected W/A - "
+ "declare %d as connected\n", i);
+ break;
+ }
+ }
+
+ IWL_DEBUG_CALIB("active_chains (bitwise) = 0x%x\n",
+ active_chains);
+
+ /* Save for use within RXON, TX, SCAN commands, etc. */
+ priv->valid_antenna = active_chains;
+
+ /* Analyze noise for rx balance */
+ average_noise[0] = ((data->chain_noise_a)/CAL_NUM_OF_BEACONS);
+ average_noise[1] = ((data->chain_noise_b)/CAL_NUM_OF_BEACONS);
+ average_noise[2] = ((data->chain_noise_c)/CAL_NUM_OF_BEACONS);
+
+ for (i = 0; i < NUM_RX_CHAINS; i++) {
+ if (!(data->disconn_array[i]) &&
+ (average_noise[i] <= min_average_noise)) {
+ /* This means that chain i is active and has
+ * lower noise values so far: */
+ min_average_noise = average_noise[i];
+ min_average_noise_antenna_i = i;
+ }
+ }
+
+ IWL_DEBUG_CALIB("average_noise: a %d b %d c %d\n",
+ average_noise[0], average_noise[1],
+ average_noise[2]);
+
+ IWL_DEBUG_CALIB("min_average_noise = %d, antenna %d\n",
+ min_average_noise, min_average_noise_antenna_i);
+
+ priv->cfg->ops->utils->gain_computation(priv, average_noise,
+ min_average_noise_antenna_i, min_average_noise);
+}
+EXPORT_SYMBOL(iwl_chain_noise_calibration);
+
diff --git a/drivers/net/wireless/iwlwifi/iwl-calib.h b/drivers/net/wireless/iwlwifi/iwl-calib.h
new file mode 100644
index 00000000000..c3a3db31199
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-calib.h
@@ -0,0 +1,104 @@
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ * Tomas Winkler <tomas.winkler@intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *****************************************************************************/
+#ifndef __iwl_calib_h__
+#define __iwl_calib_h__
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/version.h>
+
+#include <net/mac80211.h>
+#include "iwl-eeprom.h"
+#include "iwl-core.h"
+#include "iwl-4965.h"
+
+#ifdef CONFIG_IWLWIFI_RUN_TIME_CALIB
+void iwl_chain_noise_calibration(struct iwl_priv *priv,
+ struct iwl4965_notif_statistics *stat_resp);
+void iwl_sensitivity_calibration(struct iwl_priv *priv,
+ struct iwl4965_notif_statistics *resp);
+
+void iwl_init_sensitivity(struct iwl_priv *priv);
+
+static inline void iwl_chain_noise_reset(struct iwl_priv *priv)
+{
+ if (priv->cfg->ops->utils->chain_noise_reset)
+ priv->cfg->ops->utils->chain_noise_reset(priv);
+}
+#else
+static inline void iwl_chain_noise_calibration(struct iwl_priv *priv,
+ struct iwl4965_notif_statistics *stat_resp)
+{
+}
+static inline void iwl_sensitivity_calibration(struct iwl_priv *priv,
+ struct iwl4965_notif_statistics *resp)
+{
+}
+static inline void iwl_init_sensitivity(struct iwl_priv *priv)
+{
+}
+static inline void iwl_chain_noise_reset(struct iwl_priv *priv)
+{
+}
+#endif
+
+#endif /* __iwl_calib_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 7193d97630d..dcbd411a476 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -87,6 +87,13 @@ struct iwl_hcmd_ops {
};
struct iwl_hcmd_utils_ops {
int (*enqueue_hcmd)(struct iwl_priv *priv, struct iwl_host_cmd *cmd);
+#ifdef CONFIG_IWLWIFI_RUN_TIME_CALIB
+ void (*gain_computation)(struct iwl_priv *priv,
+ u32 *average_noise,
+ u16 min_average_noise_antennat_i,
+ u32 min_average_noise);
+ void (*chain_noise_reset)(struct iwl_priv *priv);
+#endif
};
struct iwl_lib_ops {
diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c
index 883b42f7e99..8a68ff4323d 100644
--- a/drivers/net/wireless/iwlwifi/iwl4965-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c
@@ -51,6 +51,7 @@
#include "iwl-io.h"
#include "iwl-helpers.h"
#include "iwl-sta.h"
+#include "iwl-calib.h"
static int iwl4965_tx_queue_update_write_ptr(struct iwl_priv *priv,
struct iwl4965_tx_queue *txq);
@@ -795,14 +796,6 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv)
/* station table will be cleared */
priv->assoc_station_added = 0;
-#ifdef CONFIG_IWL4965_SENSITIVITY
- priv->sensitivity_data.state = IWL_SENS_CALIB_NEED_REINIT;
- if (!priv->error_recovering)
- priv->start_calib = 0;
-
- iwl4965_init_sensitivity(priv, CMD_ASYNC, 1);
-#endif /* CONFIG_IWL4965_SENSITIVITY */
-
/* If we are currently associated and the new config requires
* an RXON_ASSOC and the new config wants the associated mask enabled,
* we must clear the associated from the active configuration
@@ -846,13 +839,10 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv)
iwlcore_clear_stations_table(priv);
-#ifdef CONFIG_IWL4965_SENSITIVITY
if (!priv->error_recovering)
priv->start_calib = 0;
- priv->sensitivity_data.state = IWL_SENS_CALIB_NEED_REINIT;
- iwl4965_init_sensitivity(priv, CMD_ASYNC, 1);
-#endif /* CONFIG_IWL4965_SENSITIVITY */
+ iwl_init_sensitivity(priv);
memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
@@ -6040,11 +6030,9 @@ static void iwl4965_post_associate(struct iwl_priv *priv)
iwl4965_sequence_reset(priv);
-#ifdef CONFIG_IWL4965_SENSITIVITY
/* Enable Rx differential gain and sensitivity calibrations */
- iwl4965_chain_noise_reset(priv);
+ iwl_chain_noise_reset(priv);
priv->start_calib = 1;
-#endif /* CONFIG_IWL4965_SENSITIVITY */
if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS)
priv->assoc_station_added = 1;