diff options
| -rw-r--r-- | drivers/media/video/saa7115.c | 34 | ||||
| -rw-r--r-- | include/media/saa7115.h | 19 | ||||
| -rw-r--r-- | include/media/v4l2-common.h | 12 |
3 files changed, 50 insertions, 15 deletions
diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c index ad733caec72..4ed7d65dd63 100644 --- a/drivers/media/video/saa7115.c +++ b/drivers/media/video/saa7115.c @@ -1309,10 +1309,13 @@ static int saa7115_command(struct i2c_client *client, unsigned int cmd, void *ar case VIDIOC_INT_S_VIDEO_ROUTING: { struct v4l2_routing *route = arg; + u32 input = route->input; + u8 mask = (state->ident == V4L2_IDENT_SAA7111) ? 0xf8 : 0xf0; v4l_dbg(1, debug, client, "decoder set input %d output %d\n", route->input, route->output); - /* saa7113 does not have these inputs */ - if (state->ident == V4L2_IDENT_SAA7113 && + /* saa7111/3 does not have these inputs */ + if ((state->ident == V4L2_IDENT_SAA7113 || + state->ident == V4L2_IDENT_SAA7111) && (route->input == SAA7115_COMPOSITE4 || route->input == SAA7115_COMPOSITE5)) { return -EINVAL; @@ -1327,10 +1330,23 @@ static int saa7115_command(struct i2c_client *client, unsigned int cmd, void *ar (route->input >= SAA7115_SVIDEO0) ? "S-Video" : "Composite", (route->output == SAA7115_IPORT_ON) ? "iport on" : "iport off"); state->input = route->input; + /* saa7111 has slightly different input numbering */ + if (state->ident == V4L2_IDENT_SAA7111) { + if (input >= SAA7115_COMPOSITE4) + input -= 2; + /* saa7111 specific */ + saa711x_write(client, R_10_CHROMA_CNTL_2, + (saa711x_read(client, R_10_CHROMA_CNTL_2) & 0x3f) | + ((route->output & 0xc0) ^ 0x40)); + saa711x_write(client, R_13_RT_X_PORT_OUT_CNTL, + (saa711x_read(client, R_13_RT_X_PORT_OUT_CNTL) & 0xf0) | + ((route->output & 2) ? 0x0a : 0)); + } + /* select mode */ saa711x_write(client, R_02_INPUT_CNTL_1, - (saa711x_read(client, R_02_INPUT_CNTL_1) & 0xf0) | - state->input); + (saa711x_read(client, R_02_INPUT_CNTL_1) & mask) | + input); /* bypass chrominance trap for S-Video modes */ saa711x_write(client, R_09_LUMA_CNTL, @@ -1384,6 +1400,13 @@ static int saa7115_command(struct i2c_client *client, unsigned int cmd, void *ar saa711x_writeregs(client, saa7115_cfg_reset_scaler); break; + case VIDIOC_INT_S_GPIO: + if (state->ident != V4L2_IDENT_SAA7111) + return -EINVAL; + saa711x_write(client, 0x11, (saa711x_read(client, 0x11) & 0x7f) | + (*(u32 *)arg ? 0x80 : 0)); + break; + case VIDIOC_INT_G_VBI_DATA: { struct v4l2_sliced_vbi_data *data = arg; @@ -1539,7 +1562,8 @@ static int saa7115_probe(struct i2c_client *client, state->crystal_freq = SAA7115_FREQ_32_11_MHZ; saa711x_writeregs(client, saa7115_init_auto_input); } - saa711x_writeregs(client, saa7115_init_misc); + if (state->ident != V4L2_IDENT_SAA7111) + saa711x_writeregs(client, saa7115_init_misc); saa711x_set_v4lstd(client, V4L2_STD_NTSC); v4l_dbg(1, debug, client, "status: (1E) 0x%02x, (1F) 0x%02x\n", diff --git a/include/media/saa7115.h b/include/media/saa7115.h index f677dfb9d37..bab21271959 100644 --- a/include/media/saa7115.h +++ b/include/media/saa7115.h @@ -1,5 +1,5 @@ /* - saa7115.h - definition for saa7113/4/5 inputs and frequency flags + saa7115.h - definition for saa7111/3/4/5 inputs and frequency flags Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl) @@ -21,13 +21,13 @@ #ifndef _SAA7115_H_ #define _SAA7115_H_ -/* SAA7113/4/5 HW inputs */ +/* SAA7111/3/4/5 HW inputs */ #define SAA7115_COMPOSITE0 0 #define SAA7115_COMPOSITE1 1 #define SAA7115_COMPOSITE2 2 #define SAA7115_COMPOSITE3 3 -#define SAA7115_COMPOSITE4 4 /* not available for the saa7113 */ -#define SAA7115_COMPOSITE5 5 /* not available for the saa7113 */ +#define SAA7115_COMPOSITE4 4 /* not available for the saa7111/3 */ +#define SAA7115_COMPOSITE5 5 /* not available for the saa7111/3 */ #define SAA7115_SVIDEO0 6 #define SAA7115_SVIDEO1 7 #define SAA7115_SVIDEO2 8 @@ -42,8 +42,15 @@ #define SAA7115_FREQ_FL_CGCDIV (1 << 1) /* SA 3A[6], CGCDIV, SAA7115 only */ #define SAA7115_FREQ_FL_APLL (1 << 2) /* SA 3A[3], APLL, SAA7114/5 only */ -#define SAA7115_IPORT_ON 1 -#define SAA7115_IPORT_OFF 0 +#define SAA7115_IPORT_ON 1 +#define SAA7115_IPORT_OFF 0 + +/* SAA7111 specific output flags */ +#define SAA7111_VBI_BYPASS 2 +#define SAA7111_FMT_YUV422 0x00 +#define SAA7111_FMT_RGB 0x40 +#define SAA7111_FMT_CCIR 0x80 +#define SAA7111_FMT_YUV411 0xc0 #endif diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h index 0c195ccd45d..2f8719abf5c 100644 --- a/include/media/v4l2-common.h +++ b/include/media/v4l2-common.h @@ -225,18 +225,22 @@ struct v4l2_crystal_freq { An extra flags field allows device specific configuration regarding clock frequency dividers, etc. If not used, then set flags to 0. If the frequency is not supported, then -EINVAL is returned. */ -#define VIDIOC_INT_S_CRYSTAL_FREQ _IOW ('d', 113, struct v4l2_crystal_freq) +#define VIDIOC_INT_S_CRYSTAL_FREQ _IOW('d', 113, struct v4l2_crystal_freq) /* Initialize the sensor registors to some sort of reasonable default values. */ -#define VIDIOC_INT_INIT _IOW ('d', 114, u32) +#define VIDIOC_INT_INIT _IOW('d', 114, u32) /* Set v4l2_std_id for video OUTPUT devices. This is ignored by video input devices. */ -#define VIDIOC_INT_S_STD_OUTPUT _IOW ('d', 115, v4l2_std_id) +#define VIDIOC_INT_S_STD_OUTPUT _IOW('d', 115, v4l2_std_id) /* Get v4l2_std_id for video OUTPUT devices. This is ignored by video input devices. */ -#define VIDIOC_INT_G_STD_OUTPUT _IOW ('d', 116, v4l2_std_id) +#define VIDIOC_INT_G_STD_OUTPUT _IOW('d', 116, v4l2_std_id) + +/* Set GPIO pins. Very simple right now, might need to be extended with + a v4l2_gpio struct if a direction is also needed. */ +#define VIDIOC_INT_S_GPIO _IOW('d', 117, u32) #endif /* V4L2_COMMON_H_ */ |