diff options
| -rw-r--r-- | MAINTAINERS | 6 | ||||
| -rw-r--r-- | drivers/usb/c67x00/c67x00-drv.c | 230 | ||||
| -rw-r--r-- | include/linux/usb/c67x00.h | 48 |
3 files changed, 284 insertions, 0 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index cae9001a670..93547d3d04b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4051,6 +4051,12 @@ L: linux-usb@vger.kernel.org S: Maintained W: http://www.kroah.com/linux-usb/ +USB CYPRESS C67X00 DRIVER +P: Peter Korsgaard +M: jacmet@sunsite.dk +L: linux-usb@vger.kernel.org +S: Maintained + USB DAVICOM DM9601 DRIVER P: Peter Korsgaard M: jacmet@sunsite.dk diff --git a/drivers/usb/c67x00/c67x00-drv.c b/drivers/usb/c67x00/c67x00-drv.c new file mode 100644 index 00000000000..f8189bdbd06 --- /dev/null +++ b/drivers/usb/c67x00/c67x00-drv.c @@ -0,0 +1,230 @@ +/* + * c67x00-drv.c: Cypress C67X00 USB Common infrastructure + * + * Copyright (C) 2006-2008 Barco N.V. + * Derived from the Cypress cy7c67200/300 ezusb linux driver and + * based on multiple host controller drivers inside the linux kernel. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA. + */ + +/* + * This file implements the common infrastructure for using the c67x00. + * It is both the link between the platform configuration and subdrivers and + * the link between the common hardware parts and the subdrivers (e.g. + * interrupt handling). + * + * The c67x00 has 2 SIE's (serial interface engine) wich can be configured + * to be host, device or OTG (with some limitations, E.G. only SIE1 can be OTG). + * + * Depending on the platform configuration, the SIE's are created and + * the corresponding subdriver is initialized (c67x00_probe_sie). + */ + +#include <linux/device.h> +#include <linux/io.h> +#include <linux/list.h> +#include <linux/usb.h> +#include <linux/usb/c67x00.h> + +#include "c67x00.h" + +static void c67x00_probe_sie(struct c67x00_sie *sie, + struct c67x00_device *dev, int sie_num) +{ + spin_lock_init(&sie->lock); + sie->dev = dev; + sie->sie_num = sie_num; + sie->mode = c67x00_sie_config(dev->pdata->sie_config, sie_num); + + switch (sie->mode) { + case C67X00_SIE_UNUSED: + dev_info(sie_dev(sie), + "Not using SIE %d as requested\n", sie->sie_num); + break; + + default: + dev_err(sie_dev(sie), + "Unsupported configuration: 0x%x for SIE %d\n", + sie->mode, sie->sie_num); + break; + } +} + +static void c67x00_remove_sie(struct c67x00_sie *sie) +{ +} + +static irqreturn_t c67x00_irq(int irq, void *__dev) +{ + struct c67x00_device *c67x00 = __dev; + struct c67x00_sie *sie; + u16 msg, int_status; + int i, count = 8; + + int_status = c67x00_ll_hpi_status(c67x00); + if (!int_status) + return IRQ_NONE; + + while (int_status != 0 && (count-- >= 0)) { + c67x00_ll_irq(c67x00, int_status); + for (i = 0; i < C67X00_SIES; i++) { + sie = &c67x00->sie[i]; + msg = 0; + if (int_status & SIEMSG_FLG(i)) + msg = c67x00_ll_fetch_siemsg(c67x00, i); + if (sie->irq) + sie->irq(sie, int_status, msg); + } + int_status = c67x00_ll_hpi_status(c67x00); + } + + if (int_status) + dev_warn(&c67x00->pdev->dev, "Not all interrupts handled! " + "status = 0x%04x\n", int_status); + + return IRQ_HANDLED; +} + +/* ------------------------------------------------------------------------- */ + +static int __devinit c67x00_drv_probe(struct platform_device *pdev) +{ + struct c67x00_device *c67x00; + struct c67x00_platform_data *pdata; + struct resource *res, *res2; + int ret, i; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res2) + return -ENODEV; + + pdata = pdev->dev.platform_data; + if (!pdata) + return -ENODEV; + + c67x00 = kzalloc(sizeof(*c67x00), GFP_KERNEL); + if (!c67x00) + return -ENOMEM; + + if (!request_mem_region(res->start, res->end - res->start + 1, + pdev->name)) { + dev_err(&pdev->dev, "Memory region busy\n"); + ret = -EBUSY; + goto request_mem_failed; + } + c67x00->hpi.base = ioremap(res->start, res->end - res->start + 1); + if (!c67x00->hpi.base) { + dev_err(&pdev->dev, "Unable to map HPI registers\n"); + ret = -EIO; + goto map_failed; + } + + spin_lock_init(&c67x00->hpi.lock); + c67x00->hpi.regstep = pdata->hpi_regstep; + c67x00->pdata = pdev->dev.platform_data; + c67x00->pdev = pdev; + + c67x00_ll_init(c67x00); + c67x00_ll_hpi_reg_init(c67x00); + + ret = request_irq(res2->start, c67x00_irq, 0, pdev->name, c67x00); + if (ret) { + dev_err(&pdev->dev, "Cannot claim IRQ\n"); + goto request_irq_failed; + } + + ret = c67x00_ll_reset(c67x00); + if (ret) { + dev_err(&pdev->dev, "Device reset failed\n"); + goto reset_failed; + } + + for (i = 0; i < C67X00_SIES; i++) + c67x00_probe_sie(&c67x00->sie[i], c67x00, i); + + platform_set_drvdata(pdev, c67x00); + + return 0; + + reset_failed: + free_irq(res2->start, c67x00); + request_irq_failed: + iounmap(c67x00->hpi.base); + map_failed: + release_mem_region(res->start, res->end - res->start + 1); + request_mem_failed: + kfree(c67x00); + + return ret; +} + +static int __devexit c67x00_drv_remove(struct platform_device *pdev) +{ + struct c67x00_device *c67x00 = platform_get_drvdata(pdev); + struct resource *res; + int i; + + for (i = 0; i < C67X00_SIES; i++) + c67x00_remove_sie(&c67x00->sie[i]); + + c67x00_ll_release(c67x00); + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (res) + free_irq(res->start, c67x00); + + iounmap(c67x00->hpi.base); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res) + release_mem_region(res->start, res->end - res->start + 1); + + kfree(c67x00); + + return 0; +} + +static struct platform_driver c67x00_driver = { + .probe = c67x00_drv_probe, + .remove = __devexit_p(c67x00_drv_remove), + .driver = { + .owner = THIS_MODULE, + .name = "c67x00", + }, +}; +MODULE_ALIAS("platform:c67x00"); + +static int __init c67x00_init(void) +{ + return platform_driver_register(&c67x00_driver); +} + +static void __exit c67x00_exit(void) +{ + platform_driver_unregister(&c67x00_driver); +} + +module_init(c67x00_init); +module_exit(c67x00_exit); + +MODULE_AUTHOR("Peter Korsgaard, Jan Veldeman, Grant Likely"); +MODULE_DESCRIPTION("Cypress C67X00 USB Controller Driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/usb/c67x00.h b/include/linux/usb/c67x00.h new file mode 100644 index 00000000000..83c6b45470c --- /dev/null +++ b/include/linux/usb/c67x00.h @@ -0,0 +1,48 @@ +/* + * usb_c67x00.h: platform definitions for the Cypress C67X00 USB chip + * + * Copyright (C) 2006-2008 Barco N.V. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA. + */ + +#ifndef _LINUX_USB_C67X00_H +#define _LINUX_USB_C67X00_H + +/* SIE configuration */ +#define C67X00_SIE_UNUSED 0 +#define C67X00_SIE_HOST 1 +#define C67X00_SIE_PERIPHERAL_A 2 /* peripheral on A port */ +#define C67X00_SIE_PERIPHERAL_B 3 /* peripheral on B port */ + +#define c67x00_sie_config(config, n) (((config)>>(4*(n)))&0x3) + +#define C67X00_SIE1_UNUSED (C67X00_SIE_UNUSED << 0) +#define C67X00_SIE1_HOST (C67X00_SIE_HOST << 0) +#define C67X00_SIE1_PERIPHERAL_A (C67X00_SIE_PERIPHERAL_A << 0) +#define C67X00_SIE1_PERIPHERAL_B (C67X00_SIE_PERIPHERAL_B << 0) + +#define C67X00_SIE2_UNUSED (C67X00_SIE_UNUSED << 4) +#define C67X00_SIE2_HOST (C67X00_SIE_HOST << 4) +#define C67X00_SIE2_PERIPHERAL_A (C67X00_SIE_PERIPHERAL_A << 4) +#define C67X00_SIE2_PERIPHERAL_B (C67X00_SIE_PERIPHERAL_B << 4) + +struct c67x00_platform_data { + int sie_config; /* SIEs config (C67X00_SIEx_*) */ + unsigned long hpi_regstep; /* Step between HPI registers */ +}; + +#endif /* _LINUX_USB_C67X00_H */ |