diff options
| -rw-r--r-- | drivers/hid/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/hid/Makefile | 1 | ||||
| -rw-r--r-- | drivers/hid/hid-core.c | 2 | ||||
| -rw-r--r-- | drivers/hid/hid-ids.h | 2 | ||||
| -rw-r--r-- | drivers/hid/hid-logitech-dj.c | 925 | ||||
| -rw-r--r-- | drivers/hid/hid-logitech-dj.h | 120 |
6 files changed, 1059 insertions, 0 deletions
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 410eaa90249..d2c97343fc0 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -245,6 +245,15 @@ config HID_LOGITECH ---help--- Support for Logitech devices that are not fully compliant with HID standard. +config HID_LOGITECH_DJ + tristate "Logitech Unifying receivers full support" + depends on HID_LOGITECH + default m + ---help--- + Say Y if you want support for Logitech Unifying receivers and devices. + Unifying receivers are capable of pairing up to 6 Logitech compliant + devices to the same receiver. + config LOGITECH_FF bool "Logitech force feedback support" depends on HID_LOGITECH diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile index 77c9e5d7ff9..b7ddabb0b34 100644 --- a/drivers/hid/Makefile +++ b/drivers/hid/Makefile @@ -43,6 +43,7 @@ obj-$(CONFIG_HID_KEYTOUCH) += hid-keytouch.o obj-$(CONFIG_HID_KYE) += hid-kye.o obj-$(CONFIG_HID_LCPOWER) += hid-lcpower.o obj-$(CONFIG_HID_LOGITECH) += hid-logitech.o +obj-$(CONFIG_HID_LOGITECH_DJ) += hid-logitech-dj.o obj-$(CONFIG_HID_MAGICMOUSE) += hid-magicmouse.o obj-$(CONFIG_HID_MICROSOFT) += hid-microsoft.o obj-$(CONFIG_HID_MONTEREY) += hid-monterey.o diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 1a5cf0c9cfc..ab4ae12e0a0 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1419,6 +1419,8 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_DFP_WHEEL) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G27_WHEEL) }, + { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER) }, + { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER_2) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WII_WHEEL) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACETRAVELLER) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index ea2c338814f..3d065d096a0 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -444,6 +444,8 @@ #define USB_DEVICE_ID_S510_RECEIVER_2 0xc517 #define USB_DEVICE_ID_LOGITECH_CORDLESS_DESKTOP_LX500 0xc512 #define USB_DEVICE_ID_MX3000_RECEIVER 0xc513 +#define USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER 0xc52b +#define USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER_2 0xc532 #define USB_DEVICE_ID_SPACETRAVELLER 0xc623 #define USB_DEVICE_ID_SPACENAVIGATOR 0xc626 #define USB_DEVICE_ID_DINOVO_DESKTOP 0xc704 diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c new file mode 100644 index 00000000000..5bb6f42a427 --- /dev/null +++ b/drivers/hid/hid-logitech-dj.c @@ -0,0 +1,925 @@ +/* + * HID driver for Logitech Unifying receivers + * + * Copyright (c) 2011 Logitech + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + + +#include <linux/device.h> +#include <linux/hid.h> +#include <linux/module.h> +#include <linux/usb.h> +#include "usbhid/usbhid.h" +#include "hid-ids.h" +#include "hid-logitech-dj.h" + +/* Keyboard descriptor (1) */ +static const char kbd_descriptor[] = { + 0x05, 0x01, /* USAGE_PAGE (generic Desktop) */ + 0x09, 0x06, /* USAGE (Keyboard) */ + 0xA1, 0x01, /* COLLECTION (Application) */ + 0x85, 0x01, /* REPORT_ID (1) */ + 0x95, 0x08, /* REPORT_COUNT (8) */ + 0x75, 0x01, /* REPORT_SIZE (1) */ + 0x15, 0x00, /* LOGICAL_MINIMUM (0) */ + 0x25, 0x01, /* LOGICAL_MAXIMUM (1) */ + 0x05, 0x07, /* USAGE_PAGE (Keyboard) */ + 0x19, 0xE0, /* USAGE_MINIMUM (Left Control) */ + 0x29, 0xE7, /* USAGE_MAXIMUM (Right GUI) */ + 0x81, 0x02, /* INPUT (Data,Var,Abs) */ + 0x95, 0x05, /* REPORT COUNT (5) */ + 0x05, 0x08, /* USAGE PAGE (LED page) */ + 0x19, 0x01, /* USAGE MINIMUM (1) */ + 0x29, 0x05, /* USAGE MAXIMUM (5) */ + 0x91, 0x02, /* OUTPUT (Data, Variable, Absolute) */ + 0x95, 0x01, /* REPORT COUNT (1) */ + 0x75, 0x03, /* REPORT SIZE (3) */ + 0x91, 0x01, /* OUTPUT (Constant) */ + 0x95, 0x06, /* REPORT_COUNT (6) */ + 0x75, 0x08, /* REPORT_SIZE (8) */ + 0x15, 0x00, /* LOGICAL_MINIMUM (0) */ + 0x26, 0xFF, 0x00, /* LOGICAL_MAXIMUM (255) */ + 0x05, 0x07, /* USAGE_PAGE (Keyboard) */ + 0x19, 0x00, /* USAGE_MINIMUM (no event) */ + 0x2A, 0xFF, 0x00, /* USAGE_MAXIMUM (reserved) */ + 0x81, 0x00, /* INPUT (Data,Ary,Abs) */ + 0xC0 +}; + +/* Mouse descriptor (2) */ +static const char mse_descriptor[] = { + 0x05, 0x01, /* USAGE_PAGE (Generic Desktop) */ + 0x09, 0x02, /* USAGE (Mouse) */ + 0xA1, 0x01, /* COLLECTION (Application) */ + 0x85, 0x02, /* REPORT_ID = 2 */ + 0x09, 0x01, /* USAGE (pointer) */ + 0xA1, 0x00, /* COLLECTION (physical) */ + 0x05, 0x09, /* USAGE_PAGE (buttons) */ + 0x19, 0x01, /* USAGE_MIN (1) */ + 0x29, 0x10, /* USAGE_MAX (16) */ + 0x15, 0x00, /* LOGICAL_MIN (0) */ + 0x25, 0x01, /* LOGICAL_MAX (1) */ + 0x95, 0x10, /* REPORT_COUNT (16) */ + 0x75, 0x01, /* REPORT_SIZE (1) */ + 0x81, 0x02, /* INPUT (data var abs) */ + 0x05, 0x01, /* USAGE_PAGE (generic desktop) */ + 0x16, 0x01, 0xF8, /* LOGICAL_MIN (-2047) */ + 0x26, 0xFF, 0x07, /* LOGICAL_MAX (2047) */ + 0x75, 0x0C, /* REPORT_SIZE (12) */ + 0x95, 0x02, /* REPORT_COUNT (2) */ + 0x09, 0x30, /* USAGE (X) */ + 0x09, 0x31, /* USAGE (Y) */ + 0x81, 0x06, /* INPUT */ + 0x15, 0x81, /* LOGICAL_MIN (-127) */ + 0x25, 0x7F, /* LOGICAL_MAX (127) */ + 0x75, 0x08, /* REPORT_SIZE (8) */ + 0x95, 0x01, /* REPORT_COUNT (1) */ + 0x09, 0x38, /* USAGE (wheel) */ + 0x81, 0x06, /* INPUT */ + 0x05, 0x0C, /* USAGE_PAGE(consumer) */ + 0x0A, 0x38, 0x02, /* USAGE(AC Pan) */ + 0x95, 0x01, /* REPORT_COUNT (1) */ + 0x81, 0x06, /* INPUT */ + 0xC0, /* END_COLLECTION */ + 0xC0, /* END_COLLECTION */ +}; + +/* Consumer Control descriptor (3) */ +static const char consumer_descriptor[] = { + 0x05, 0x0C, /* USAGE_PAGE (Consumer Devices) */ + 0x09, 0x01, /* USAGE (Consumer Control) */ + 0xA1, 0x01, /* COLLECTION (Application) */ + 0x85, 0x03, /* REPORT_ID = 3 */ + 0x75, 0x10, /* REPORT_SIZE (16) */ + 0x95, 0x02, /* REPORT_COUNT (2) */ + 0x15, 0x01, /* LOGICAL_MIN (1) */ + 0x26, 0x8C, 0x02, /* LOGICAL_MAX (652) */ + 0x19, 0x01, /* USAGE_MIN (1) */ + 0x2A, 0x8C, 0x02, /* USAGE_MAX (652) */ + 0x81, 0x00, /* INPUT (Data Ary Abs) */ + 0xC0, /* END_COLLECTION */ +}; /* */ + +/* System control descriptor (4) */ +static const char syscontrol_descriptor[] = { + 0x05, 0x01, /* USAGE_PAGE (Generic Desktop) */ + 0x09, 0x80, /* USAGE (System Control) */ + 0xA1, 0x01, /* COLLECTION (Application) */ + 0x85, 0x04, /* REPORT_ID = 4 */ + 0x75, 0x02, /* REPORT_SIZE (2) */ + 0x95, 0x01, /* REPORT_COUNT (1) */ + 0x15, 0x01, /* LOGICAL_MIN (1) */ + 0x25, 0x03, /* LOGICAL_MAX (3) */ + 0x09, 0x82, /* USAGE (System Sleep) */ + 0x09, 0x81, /* USAGE (System Power Down) */ + 0x09, 0x83, /* USAGE (System Wake Up) */ + 0x81, 0x60, /* INPUT (Data Ary Abs NPrf Null) */ + 0x75, 0x06, /* REPORT_SIZE (6) */ + 0x81, 0x03, /* INPUT (Cnst Var Abs) */ + 0xC0, /* END_COLLECTION */ +}; + +/* Media descriptor (8) */ +static const char media_descriptor[] = { + 0x06, 0xbc, 0xff, /* Usage Page 0xffbc */ + 0x09, 0x88, /* Usage 0x0088 */ + 0xa1, 0x01, /* BeginCollection */ + 0x85, 0x08, /* Report ID 8 */ + 0x19, 0x01, /* Usage Min 0x0001 */ + 0x29, 0xff, /* Usage Max 0x00ff */ + 0x15, 0x01, /* Logical Min 1 */ + 0x26, 0xff, 0x00, /* Logical Max 255 */ + 0x75, 0x08, /* Report Size 8 */ + 0x95, 0x01, /* Report Count 1 */ + 0x81, 0x00, /* Input */ + 0xc0, /* EndCollection */ +}; /* */ + +/* Maximum size of all defined hid reports in bytes (including report id) */ +#define MAX_REPORT_SIZE 8 + +/* Number of possible hid report types that can be created by this driver. + * + * Right now, RF report types have the same report types (or report id's) + * than the hid report created from those RF reports. In the future + * this doesnt have to be true. + * + * For instance, RF report type 0x01 which has a size of 8 bytes, corresponds + * to hid report id 0x01, this is standard keyboard. Same thing applies to mice + * reports and consumer control, etc. If a new RF report is created, it doesn't + * has to have the same report id as its corresponding hid report, so an + * translation may have to take place for future report types. + */ +#define NUMBER_OF_HID_REPORTS 32 +static const u8 hid_reportid_size_map[NUMBER_OF_HID_REPORTS] = { + [1] = 8, /* Standard keyboard */ + [2] = 8, /* Standard mouse */ + [3] = 5, /* Consumer control */ + [4] = 2, /* System control */ + [8] = 2, /* Media Center */ +}; + + +#define LOGITECH_DJ_INTERFACE_NUMBER 0x02 + +#define DJ_DEVICE_INDEX_MIN 1 +#define DJ_DEVICE_INDEX_MAX 6 + +static struct hid_ll_driver logi_dj_ll_driver; + +static int logi_dj_output_hidraw_report(struct hid_device *hid, u8 * buf, + size_t count, + unsigned char report_type); + +static void logi_dj_recv_destroy_djhid_device(struct dj_receiver_dev *djrcv_dev, + struct dj_report *dj_report) +{ + /* Called in delayed work context */ + struct dj_device *dj_dev; + unsigned long flags; + + spin_lock_irqsave(&djrcv_dev->lock, flags); + dj_dev = djrcv_dev->paired_dj_devices[dj_report->device_index]; + djrcv_dev->paired_dj_devices[dj_report->device_index] = NULL; + spin_unlock_irqrestore(&djrcv_dev->lock, flags); + + if (dj_dev != NULL) { + hid_destroy_device(dj_dev->hdev); + kfree(dj_dev); + } else { + dev_err(&djrcv_dev->hdev->dev, "%s: can't destroy a NULL device\n", + __func__); + } +} + +static void logi_dj_recv_add_djhid_device(struct dj_receiver_dev *djrcv_dev, + struct dj_report *dj_report) +{ + /* Called in delayed work context */ + struct hid_device *djrcv_hdev = djrcv_dev->hdev; + struct usb_interface *intf = to_usb_interface(djrcv_hdev->dev.parent); + struct usb_device *usbdev = interface_to_usbdev(intf); + struct hid_device *dj_hiddev; + struct dj_device *dj_dev; + + /* Device index goes from 1 to 6, we need 3 bytes to store the + * semicolon, the index, and a null terminator + */ + unsigned char tmpstr[3]; + + if (dj_report->report_params[DEVICE_PAIRED_PARAM_SPFUNCTION] & + SPFUNCTION_DEVICE_LIST_EMPTY) { + dbg_hid("%s: device list is empty\n", __func__); + return; + } + + if ((dj_report->device_index < DJ_DEVICE_INDEX_MIN) || + (dj_report->device_index > DJ_DEVICE_INDEX_MAX)) { + dev_err(&djrcv_hdev->dev, "%s: invalid device index:%d\n", + __func__, dj_report->device_index); + return; + } + + dj_hiddev = hid_allocate_device(); + if (IS_ERR(dj_hiddev)) { + dev_err(&djrcv_hdev->dev, "%s: hid_allocate_device failed\n", + __func__); + return; + } + + dj_hiddev->ll_driver = &logi_dj_ll_driver; + dj_hiddev->hid_output_raw_report = logi_dj_output_hidraw_report; + + dj_hiddev->dev.parent = &djrcv_hdev->dev; + dj_hiddev->bus = BUS_USB; + dj_hiddev->vendor = le16_to_cpu(usbdev->descriptor.idVendor); + dj_hiddev->product = le16_to_cpu(usbdev->descriptor.idProduct); + snprintf(dj_hiddev->name, sizeof(dj_hiddev->name), + "Logitech Unifying Device. Wireless PID:%02x%02x", + dj_report->report_params[DEVICE_PAIRED_PARAM_EQUAD_ID_MSB], + dj_report->report_params[DEVICE_PAIRED_PARAM_EQUAD_ID_LSB]); + + usb_make_path(usbdev, dj_hiddev->phys, sizeof(dj_hiddev->phys)); + snprintf(tmpstr, sizeof(tmpstr), ":%d", dj_report->device_index); + strlcat(dj_hiddev->phys, tmpstr, sizeof(dj_hiddev->phys)); + + dj_dev = kzalloc(sizeof(struct dj_device), GFP_KERNEL); + + if (!dj_dev) { + dev_err(&djrcv_hdev->dev, "%s: failed allocating dj_device\n", + __func__); + goto dj_device_allocate_fail; + } + + dj_dev->reports_supported = le32_to_cpu( + dj_report->report_params[DEVICE_PAIRED_RF_REPORT_TYPE]); + dj_dev->hdev = dj_hiddev; + dj_dev->dj_receiver_dev = djrcv_dev; + dj_dev->device_index = dj_report->device_index; + dj_hiddev->driver_data = dj_dev; + + djrcv_dev->paired_dj_devices[dj_report->device_index] = dj_dev; + + if (hid_add_device(dj_hiddev)) { + dev_err(&djrcv_hdev->dev, "%s: failed adding dj_device\n", + __func__); + goto hid_add_device_fail; + } + + return; + +hid_add_device_fail: + djrcv_dev->paired_dj_devices[dj_report->device_index] = NULL; + kfree(dj_dev); +dj_device_allocate_fail: + hid_destroy_device(dj_hiddev); +} + +static void delayedwork_callback(struct work_struct *work) +{ + struct dj_receiver_dev *djrcv_dev = + container_of(work, struct dj_receiver_dev, work); + + struct dj_report dj_report; + unsigned long flags; + int count; + + dbg_hid("%s\n", __func__); + + spin_lock_irqsave(&djrcv_dev->lock, flags); + + count = kfifo_out(&djrcv_dev->notif_fifo, &dj_report, + sizeof(struct dj_report)); + + if (count != sizeof(struct dj_report)) { + dev_err(&djrcv_dev->hdev->dev, "%s: workitem triggered without " + "notifications available\n", __func__); + spin_unlock_irqrestore(&djrcv_dev->lock, flags); + return; + } + + if (!kfifo_is_empty(&djrcv_dev->notif_fifo)) { + if (schedule_work(&djrcv_dev->work) == 0) { + dbg_hid("%s: did not schedule the work item, was " + "already queued\n", __func__); + } + } + + spin_unlock_irqrestore(&djrcv_dev->lock, flags); + + switch (dj_report.report_type) { + case REPORT_TYPE_NOTIF_DEVICE_PAIRED: + logi_dj_recv_add_djhid_device(djrcv_dev, &dj_report); + break; + case REPORT_TYPE_NOTIF_DEVICE_UNPAIRED: + logi_dj_recv_destroy_djhid_device(djrcv_dev, &dj_report); + break; + default: + dbg_hid("%s: unexpected report type\n", __func__); + } +} + +static void logi_dj_recv_queue_notification(struct dj_receiver_dev *djrcv_dev, + struct dj_report *dj_report) +{ + /* We are called from atomic context (tasklet && djrcv->lock held) */ + + kfifo_in(&djrcv_dev->notif_fifo, dj_report, sizeof(struct dj_report)); + + if (schedule_work(&djrcv_dev->work) == 0) { + dbg_hid("%s: did not schedule the work item, was already " + "queued\n", __func__); + } +} + +static void logi_dj_recv_forward_null_report(struct dj_receiver_dev *djrcv_dev, + struct dj_report *dj_report) +{ + /* We are called from atomic context (tasklet && djrcv->lock held) */ + unsigned int i; + u8 reportbuffer[MAX_REPORT_SIZE]; + struct dj_device *djdev; + + djdev = djrcv_dev->paired_dj_devices[dj_report->device_index]; + + if (!djdev) { + dbg_hid("djrcv_dev->paired_dj_devices[dj_report->device_index]" + " is NULL, index %d\n", dj_report->device_index); + return; + } + + memset(reportbuffer, 0, sizeof(reportbuffer)); + + for (i = 0; i < NUMBER_OF_HID_REPORTS; i++) { + if (djdev->reports_supported & (1 << i)) { + reportbuffer[0] = i; + if (hid_input_report(djdev->hdev, + HID_INPUT_REPORT, + reportbuffer, + hid_reportid_size_map[i], 1)) { + dbg_hid("hid_input_report error sending null " + "report\n"); + } + } + } +} + +static void logi_dj_recv_forward_report(struct dj_receiver_dev *djrcv_dev, + struct dj_report *dj_report) +{ + /* We are called from atomic context (tasklet && djrcv->lock held) */ + struct dj_device *dj_device; + + dj_device = djrcv_dev->paired_dj_devices[dj_report->device_index]; + + if (dj_device == NULL) { + dbg_hid("djrcv_dev->paired_dj_devices[dj_report->device_index]" + " is NULL, index %d\n", dj_report->device_index); + return; + } + + if ((dj_report->report_type > ARRAY_SIZE(hid_reportid_size_map) - 1) || + (hid_reportid_size_map[dj_report->report_type] == 0)) { + dbg_hid("invalid report type:%x\n", dj_report->report_type); + return; + } + + if (hid_input_report(dj_device->hdev, + HID_INPUT_REPORT, &dj_report->report_type, + hid_reportid_size_map[dj_report->report_type], 1)) { + dbg_hid("hid_input_report error\n"); + } +} + + +static int logi_dj_recv_send_report(struct dj_receiver_dev *djrcv_dev, + struct dj_report *dj_report) +{ + struct hid_device *hdev = djrcv_dev->hdev; + int sent_bytes; + + if (!hdev->hid_output_raw_report) { + dev_err(&hdev->dev, "%s:" + "hid_output_raw_report is null\n", __func__); + return -ENODEV; + } + + sent_bytes = hdev->hid_output_raw_report(hdev, (u8 *) dj_report, + sizeof(struct dj_report), + HID_OUTPUT_REPORT); + + return (sent_bytes < 0) ? sent_bytes : 0; +} + +static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev) +{ + struct dj_report dj_report; + + memset(&dj_report, 0, sizeof(dj_report)); + dj_report.report_id = REPORT_ID_DJ_SHORT; + dj_report.device_index = 0xFF; + dj_report.report_type = REPORT_TYPE_CMD_GET_PAIRED_DEVICES; + return logi_dj_recv_send_report(djrcv_dev, &dj_report); +} + +static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev, + unsigned timeout) +{ + struct dj_report dj_report; + + memset(&dj_report, 0, sizeof(dj_report)); + dj_report.report_id = REPORT_ID_DJ_SHORT; + dj_report.device_index = 0xFF; + dj_report.report_type = REPORT_TYPE_CMD_SWITCH; + dj_report.report_params[CMD_SWITCH_PARAM_DEVBITFIELD] = 0x1F; + dj_report.report_params[CMD_SWITCH_PARAM_TIMEOUT_SECONDS] = (u8)timeout; + return logi_dj_recv_send_report(djrcv_dev, &dj_report); +} + + +static int logi_dj_ll_open(struct hid_device *hid) +{ + dbg_hid("%s:%s\n", __func__, hid->phys); + return 0; + +} + +static void logi_dj_ll_close(struct hid_device *hid) +{ + dbg_hid("%s:%s\n", __func__, hid->phys); +} + +static int logi_dj_output_hidraw_report(struct hid_device *hid, u8 * buf, + size_t count, + unsigned char report_type) +{ + /* Called by hid raw to send data */ + dbg_hid("%s\n", __func__); + + return 0; +} + +static int logi_dj_ll_parse(struct hid_device *hid) +{ + struct dj_device *djdev = hid->driver_data; + int retval; + + dbg_hid("%s\n", __func__); + + djdev->hdev->version = 0x0111; + djdev->hdev->country = 0x00; + + if (djdev->reports_supported & STD_KEYBOARD) { + dbg_hid("%s: sending a kbd descriptor, reports_supported: %x\n", + __func__, djdev->reports_supported); + retval = hid_parse_report(hid, + (u8 *) kbd_descriptor, + sizeof(kbd_descriptor)); + if (retval) { + dbg_hid("%s: sending a kbd descriptor, hid_parse failed" + " error: %d\n", __func__, retval); + return retval; + } + } + + if (djdev->reports_supported & STD_MOUSE) { + dbg_hid("%s: sending a mouse descriptor, reports_supported: " + "%x\n", __func__, djdev->reports_supported); + retval = hid_parse_report(hid, + (u8 *) mse_descriptor, + sizeof(mse_descriptor)); + if (retval) { + dbg_hid("%s: sending a mouse descriptor, hid_parse " + "failed error: %d\n", __func__, retval); + return retval; + } + } + + if (djdev->reports_supported & MULTIMEDIA) { + dbg_hid("%s: sending a multimedia report descriptor: %x\n", + __func__, djdev->reports_supported); + retval = hid_parse_report(hid, + (u8 *) consumer_descriptor, + sizeof(consumer_descriptor)); + if (retval) { + dbg_hid("%s: sending a consumer_descriptor, hid_parse " + "failed error: %d\n", __func__, retval); + return retval; + } + } + + if (djdev->reports_supported & POWER_KEYS) { + dbg_hid("%s: sending a power keys report descriptor: %x\n", + __func__, djdev->reports_supported); + retval = hid_parse_report(hid, + (u8 *) syscontrol_descriptor, + sizeof(syscontrol_descriptor)); + if (retval) { + dbg_hid("%s: sending a syscontrol_descriptor, " + "hid_parse failed error: %d\n", + __func__, retval); + return retval; + } + } + + if (djdev->reports_supported & MEDIA_CENTER) { + dbg_hid("%s: sending a media center report descriptor: %x\n", + __func__, djdev->reports_supported); + retval = hid_parse_report(hid, + (u8 *) media_descriptor, + sizeof(media_descriptor)); + if (retval) { + dbg_hid("%s: sending a media_descriptor, hid_parse " + "failed error: %d\n", __func__, retval); + return retval; + } + } + + if (djdev->reports_supported & KBD_LEDS) { + dbg_hid("%s: need to send kbd leds report descriptor: %x\n", + __func__, djdev->reports_supported); + } + + return 0; +} + +static int logi_dj_ll_input_event(struct input_dev *dev, unsigned int type, + unsigned int code, int value) +{ + /* Sent by the input layer to handle leds and Force Feedback */ + struct hid_device *dj_hiddev = input_get_drvdata(dev); + struct dj_device *dj_dev = dj_hiddev->driver_data; + + struct dj_receiver_dev *djrcv_dev = + dev_get_drvdata(dj_hiddev->dev.parent); + struct hid_device *dj_rcv_hiddev = djrcv_dev->hdev; + struct hid_report_enum *output_report_enum; + + struct hid_field *field; + struct hid_report *report; + unsigned char data[8]; + int offset; + + dbg_hid("%s: %s, type:%d | code:%d | value:%d\n", + __func__, dev->phys, type, code, value); + + if (type != EV_LED) + return -1; + + offset = hidinput_find_field(dj_hiddev, type, code, &field); + + if (offset == -1) { + dev_warn(&dev->dev, "event field not found\n"); + return -1; + } + hid_set_field(field, offset, value); + hid_output_report(field->report, &data[0]); + + output_report_enum = &dj_rcv_hiddev->report_enum[HID_OUTPUT_REPORT]; + report = output_report_enum->report_id_hash[REPORT_ID_DJ_SHORT]; + hid_set_field(report->field[0], 0, dj_dev->device_index); + hid_set_field(report->field[0], 1, REPORT_TYPE_LEDS); + hid_set_field(report->field[0], 2, data[1]); + + usbhid_submit_report(dj_rcv_hiddev, report, USB_DIR_OUT); + + return 0; + +} + +static int logi_dj_ll_start(struct hid_device *hid) +{ + dbg_hid("%s\n", __func__); + return 0; +} + +static void logi_dj_ll_stop(struct hid_device *hid) +{ + dbg_hid("%s\n", __func__); +} + + +static struct hid_ll_driver logi_dj_ll_driver = { + .parse = logi_dj_ll_parse, + .start = logi_dj_ll_start, + .stop = logi_dj_ll_stop, + .open = logi_dj_ll_open, + .close = logi_dj_ll_close, + .hidinput_input_event = logi_dj_ll_input_event, +}; + + +static int logi_dj_raw_event(struct hid_device *hdev, + struct hid_report *report, u8 *data, + int size) +{ + struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev); + struct dj_report *dj_report = (struct dj_report *) data; + unsigned long flags; + bool report_processed = false; + + dbg_hid("%s, size:%d\n", __func__, size); + + /* Here we receive all data coming from iface 2, there are 4 cases: + * + * 1) Data should continue its normal processing i.e. data does not + * come from the DJ collection, in which case we do nothing and + * return 0, so hid-core can continue normal processing (will forward + * to associated hidraw device) + * + * 2) Data is from DJ collection, and is intended for this driver i. e. + * data contains arrival, departure, etc notifications, in which case + * we queue them for delayed processing by the work queue. We return 1 + * to hid-core as no further processing is required from it. + * + * 3) Data is from DJ collection, and informs a connection change, + * if the change means rf link loss, then we must send a null report + * to the upper layer to discard potentially pressed keys that may be + * repeated forever by the input layer. Return 1 to hid-core as no + * further processing is required. + * + * 4) Data is from DJ collection and is an actual input event from + * a paired DJ device in which case we forward it to the correct hid + * device (via hid_input_report() ) and return 1 so hid-core does not do + * anything else with it. + */ + + spin_lock_irqsave(&djrcv_dev->lock, flags); + if (dj_report->report_id == REPORT_ID_DJ_SHORT) { + switch (dj_report->report_type) { + case REPORT_TYPE_NOTIF_DEVICE_PAIRED: + case REPORT_TYPE_NOTIF_DEVICE_UNPAIRED: + logi_dj_recv_queue_notification(djrcv_dev, dj_report); + break; + case REPORT_TYPE_NOTIF_CONNECTION_STATUS: + if (dj_report->report_params[CONNECTION_STATUS_PARAM_STATUS] == + STATUS_LINKLOSS) { + logi_dj_recv_forward_null_report(djrcv_dev, dj_report); + } + break; + default: + logi_dj_recv_forward_report(djrcv_dev, dj_report); + } + report_processed = true; + } + spin_unlock_irqrestore(&djrcv_dev->lock, flags); + + return report_processed; +} + +static int logi_dj_probe(struct hid_device *hdev, + const struct hid_device_id *id) +{ + struct usb_interface *intf = to_usb_interface(hdev->dev.parent); + struct dj_receiver_dev *djrcv_dev; + int retval; + + if (is_dj_device((struct dj_device *)hdev->driver_data)) + return -ENODEV; + + dbg_hid("%s called for ifnum %d\n", __func__, + intf->cur_altsetting->desc.bInterfaceNumber); + + /* Ignore interfaces 0 and 1, they will not carry any data, dont create + * any hid_device for them */ + if (intf->cur_altsetting->desc.bInterfaceNumber != + LOGITECH_DJ_INTERFACE_NUMBER) { + dbg_hid("%s: ignoring ifnum %d\n", __func__, + intf->cur_altsetting->desc.bInterfaceNumber); + return -ENODEV; + } + + /* Treat interface 2 */ + + djrcv_dev = kzalloc(sizeof(struct dj_receiver_dev), GFP_KERNEL); + if (!djrcv_dev) { + dev_err(&hdev->dev, + "%s:failed allocating dj_receiver_dev\n", __func__); + return -ENOMEM; + } + djrcv_dev->hdev = hdev; + INIT_WORK(&djrcv_dev->work, delayedwork_callback); + spin_lock_init(&djrcv_dev->lock); + if (kfifo_alloc(&djrcv_dev->notif_fifo, + DJ_MAX_NUMBER_NOTIFICATIONS * sizeof(struct dj_report), + GFP_KERNEL)) { + dev_err(&hdev->dev, + "%s:failed allocating notif_fifo\n", __func__); + kfree(djrcv_dev); + return -ENOMEM; + } + hid_set_drvdata(hdev, djrcv_dev); + + /* Call to usbhid to fetch the HID descriptors of interface 2 and + * subsequently call to the hid/hid-core to parse the fetched + * descriptors, this will in turn create the hidraw and hiddev nodes + * for interface 2 of the receiver */ + retval = hid_parse(hdev); + if (retval) { + dev_err(&hdev->dev, + "%s:parse of interface 2 failed\n", __func__); + goto hid_parse_fail; + } + + /* Starts the usb device and connects to upper interfaces hiddev and + * hidraw */ + retval = hid_hw_start(hdev, HID_CONNECT_DEFAULT); + if (retval) { + dev_err(&hdev->dev, + "%s:hid_hw_start returned error\n", __func__); + goto hid_hw_start_fail; + } + + retval = logi_dj_recv_switch_to_dj_mode(djrcv_dev, 0); + if (retval < 0) { + dev_err(&hdev->dev, + "%s:logi_dj_recv_switch_to_dj_mode returned error:%d\n", + __func__, retval); + goto switch_to_dj_mode_fail; + } + + /* This is enabling the polling urb on the IN endpoint */ + retval = hdev->ll_driver->open(hdev); + if (retval < 0) { + dev_err(&hdev->dev, "%s:hdev->ll_driver->open returned " + "error:%d\n", __func__, retval); + goto llopen_failed; + } + + retval = logi_dj_recv_query_paired_devices(djrcv_dev); + if (retval < 0) { + dev_err(&hdev->dev, "%s:logi_dj_recv_query_paired_devices " + "error:%d\n", __func__, retval); + goto logi_dj_recv_query_paired_devices_failed; + } + + return retval; + +logi_dj_recv_query_paired_devices_failed: + hdev->ll_driver->close(hdev); + +llopen_failed: +switch_to_dj_mode_fail: + hid_hw_stop(hdev); + +hid_hw_start_fail: +hid_parse_fail: + kfifo_free(&djrcv_dev->notif_fifo); + kfree(djrcv_dev); + hid_set_drvdata(hdev, NULL); + return retval; + +} + +#ifdef CONFIG_PM +static int logi_dj_reset_resume(struct hid_device *hdev) +{ + int retval; + struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev); + + retval = logi_dj_recv_switch_to_dj_mode(djrcv_dev, 0); + if (retval < 0) { + dev_err(&hdev->dev, + "%s:logi_dj_recv_switch_to_dj_mode returned error:%d\n", + __func__, retval); + } + + return 0; +} +#endif + +static void logi_dj_remove(struct hid_device *hdev) +{ + struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev); + struct dj_device *dj_dev; + int i; + + dbg_hid("%s\n", __func__); + + cancel_work_sync(&djrcv_dev->work); + + hdev->ll_driver->close(hdev); + hid_hw_stop(hdev); + + /* I suppose that at this point the only context that can access + * the djrecv_data is this thread as the work item is guaranteed to + * have finished and no more raw_event callbacks should arrive after + * the remove callback was triggered so no locks are put around the + * code below */ + for (i = 0; i < DJ_MAX_PAIRED_DEVICES; i++) { + dj_dev = djrcv_dev->paired_dj_devices[i]; + if (dj_dev != NULL) { + hid_destroy_device(dj_dev->hdev); + kfree(dj_dev); + djrcv_dev->paired_dj_devices[i] = NULL; + } + } + + kfifo_free(&djrcv_dev->notif_fifo); + kfree(djrcv_dev); + hid_set_drvdata(hdev, NULL); +} + +static int logi_djdevice_probe(struct hid_device *hdev, + const struct hid_device_id *id) +{ + int ret; + struct dj_device *dj_dev = hdev->driver_data; + + if (!is_dj_device(dj_dev)) + return -ENODEV; + + ret = hid_parse(hdev); + if (!ret) + ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); + + return ret; +} + +static const struct hid_device_id logi_dj_receivers[] = { + {HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, + USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER)}, + {HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, + USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER_2)}, + {} +}; + +MODULE_DEVICE_TABLE(hid, logi_dj_receivers); + +static struct hid_driver logi_djreceiver_driver = { + .name = "logitech-djreceiver", + .id_table = logi_dj_receivers, + .probe = logi_dj_probe, + .remove = logi_dj_remove, + .raw_event = logi_dj_raw_event, +#ifdef CONFIG_PM + .reset_resume = logi_dj_reset_resume, +#endif +}; + + +static const struct hid_device_id logi_dj_devices[] = { + {HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, + USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER)}, + {HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, + USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER_2)}, + {} +}; + +static struct hid_driver logi_djdevice_driver = { + .name = "logitech-djdevice", + .id_table = logi_dj_devices, + .probe = logi_djdevice_probe, +}; + + +static int __init logi_dj_init(void) +{ + int retval; + + dbg_hid("Logitech-DJ:%s\n", __func__); + + retval = hid_register_driver(&logi_djreceiver_driver); + if (retval) + return retval; + + retval = hid_register_driver(&logi_djdevice_driver); + if (retval) + hid_unregister_driver(&logi_djreceiver_driver); + + return retval; + +} + +static void __exit logi_dj_exit(void) +{ + dbg_hid("Logitech-DJ:%s\n", __func__); + + hid_unregister_driver(&logi_djdevice_driver); + hid_unregister_driver(&logi_djreceiver_driver); + +} + +module_init(logi_dj_init); +module_exit(logi_dj_exit); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Logitech"); +MODULE_AUTHOR("Nestor Lopez Casado"); +MODULE_AUTHOR("nlopezcasad@logitech.com"); diff --git a/drivers/hid/hid-logitech-dj.h b/drivers/hid/hid-logitech-dj.h new file mode 100644 index 00000000000..5982263acd7 --- /dev/null +++ b/drivers/hid/hid-logitech-dj.h @@ -0,0 +1,120 @@ +#ifndef __HID_LOGITECH_DJ_H +#define __HID_LOGITECH_DJ_H + +/* + * HID driver for Logitech Unifying receivers + * + * Copyright (c) 2011 Logitech + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/kfifo.h> + +#define DJ_MAX_PAIRED_DEVICES 6 +#define DJ_MAX_NUMBER_NOTIFICATIONS 8 + +#define DJREPORT_SHORT_LENGTH 15 +#define DJREPORT_LONG_LENGTH 32 + +#define REPORT_ID_DJ_SHORT 0x20 +#define REPORT_ID_DJ_LONG 0x21 + +#define REPORT_TYPE_RFREPORT_FIRST 0x01 +#define REPORT_TYPE_RFREPORT_LAST 0x1F + +/* Command Switch to DJ mode */ +#define REPORT_TYPE_CMD_SWITCH 0x80 +#define CMD_SWITCH_PARAM_DEVBITFIELD 0x00 +#define CMD_SWITCH_PARAM_TIMEOUT_SECONDS 0x01 +#define TIMEOUT_NO_KEEPALIVE 0x00 + +/* Command to Get the list of Paired devices */ +#define REPORT_TYPE_CMD_GET_PAIRED_DEVICES 0x81 + +/* Device Paired Notification */ +#define REPORT_TYPE_NOTIF_DEVICE_PAIRED 0x41 +#define SPFUNCTION_MORE_NOTIF_EXPECTED 0x01 +#define SPFUNCTION_DEVICE_LIST_EMPTY 0x02 +#define DEVICE_PAIRED_PARAM_SPFUNCTION 0x00 +#define DEVICE_PAIRED_PARAM_EQUAD_ID_LSB 0x01 +#define DEVICE_PAIRED_PARAM_EQUAD_ID_MSB 0x02 +#define DEVICE_PAIRED_RF_REPORT_TYPE 0x03 + +/* Device Un-Paired Notification */ +#define REPORT_TYPE_NOTIF_DEVICE_UNPAIRED 0x40 + + +/* Connection Status Notification */ +#define REPORT_TYPE_NOTIF_CONNECTION_STATUS 0x42 +#define CONNECTION_STATUS_PARAM_STATUS 0x00 +#define STATUS_LINKLOSS 0x01 + +/* Error Notification */ +#define REPORT_TYPE_NOTIF_ERROR 0x7F +#define NOTIF_ERROR_PARAM_ETYPE 0x00 +#define ETYPE_KEEPALIVE_TIMEOUT 0x01 + +/* supported DJ HID && RF report types */ +#define REPORT_TYPE_KEYBOARD 0x01 +#define REPORT_TYPE_MOUSE 0x02 +#define REPORT_TYPE_CONSUMER_CONTROL 0x03 +#define REPORT_TYPE_SYSTEM_CONTROL 0x04 +#define REPORT_TYPE_MEDIA_CENTER 0x08 +#define REPORT_TYPE_LEDS 0x0E + +/* RF Report types bitfield */ +#define STD_KEYBOARD 0x00000002 +#define STD_MOUSE 0x00000004 +#define MULTIMEDIA 0x00000008 +#define POWER_KEYS 0x00000010 +#define MEDIA_CENTER 0x00000100 +#define KBD_LEDS 0x00004000 + +struct dj_report { + u8 report_id; + u8 device_index; + u8 report_type; + u8 report_params[DJREPORT_SHORT_LENGTH - 3]; +}; + +struct dj_receiver_dev { + struct hid_device *hdev; + struct dj_device *paired_dj_devices[DJ_MAX_PAIRED_DEVICES]; + struct work_struct work; + struct kfifo notif_fifo; + spinlock_t lock; +}; + +struct dj_device { + struct hid_device *hdev; + struct dj_receiver_dev *dj_receiver_dev; + u32 reports_supported; + u8 device_index; +}; + +/** + * is_dj_device - know if the given dj_device is not the receiver. + * @dj_dev: the dj device to test + * + * This macro tests if a struct dj_device pointer is a device created + * by the bus enumarator. + */ +#define is_dj_device(dj_dev) \ + (&(dj_dev)->dj_receiver_dev->hdev->dev == (dj_dev)->hdev->dev.parent) + +#endif |