diff options
| -rw-r--r-- | arch/powerpc/Kconfig | 2 | ||||
| -rw-r--r-- | arch/powerpc/include/asm/hw_irq.h | 5 | ||||
| -rw-r--r-- | arch/powerpc/include/asm/smp.h | 1 | ||||
| -rw-r--r-- | arch/powerpc/kernel/Makefile | 10 | ||||
| -rw-r--r-- | arch/powerpc/kernel/cputable.c | 27 | ||||
| -rw-r--r-- | arch/powerpc/kernel/entry_64.S | 60 | ||||
| -rw-r--r-- | arch/powerpc/kernel/exceptions-64e.S | 784 | ||||
| -rw-r--r-- | arch/powerpc/kernel/head_64.S | 68 | ||||
| -rw-r--r-- | arch/powerpc/kernel/setup_64.c | 19 | ||||
| -rw-r--r-- | arch/powerpc/mm/Makefile | 1 | ||||
| -rw-r--r-- | arch/powerpc/platforms/Kconfig.cputype | 38 | ||||
| -rw-r--r-- | arch/powerpc/xmon/xmon.c | 2 |
12 files changed, 993 insertions, 24 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 52349ef1b3a..4c0747e8ed7 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -472,7 +472,7 @@ config PPC_16K_PAGES bool "16k page size" if 44x config PPC_64K_PAGES - bool "64k page size" if 44x || PPC_STD_MMU_64 + bool "64k page size" if 44x || PPC_STD_MMU_64 || PPC_BOOK3E_64 select PPC_HAS_HASH_64K if PPC_STD_MMU_64 config PPC_256K_PAGES diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h index 8b505eaaa38..e73d554538d 100644 --- a/arch/powerpc/include/asm/hw_irq.h +++ b/arch/powerpc/include/asm/hw_irq.h @@ -49,8 +49,13 @@ extern void iseries_handle_interrupts(void); #define raw_irqs_disabled() (local_get_flags() == 0) #define raw_irqs_disabled_flags(flags) ((flags) == 0) +#ifdef CONFIG_PPC_BOOK3E +#define __hard_irq_enable() __asm__ __volatile__("wrteei 1": : :"memory"); +#define __hard_irq_disable() __asm__ __volatile__("wrteei 0": : :"memory"); +#else #define __hard_irq_enable() __mtmsrd(mfmsr() | MSR_EE, 1) #define __hard_irq_disable() __mtmsrd(mfmsr() & ~MSR_EE, 1) +#endif #define hard_irq_disable() \ do { \ diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h index e782f43ee66..c0d3b8af931 100644 --- a/arch/powerpc/include/asm/smp.h +++ b/arch/powerpc/include/asm/smp.h @@ -153,6 +153,7 @@ extern void arch_send_call_function_ipi(cpumask_t mask); * 64-bit but defining them all here doesn't harm */ extern void generic_secondary_smp_init(void); +extern void generic_secondary_thread_init(void); extern unsigned long __secondary_hold_spinloop; extern unsigned long __secondary_hold_acknowledge; extern char __secondary_hold; diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index b73396b9390..035946f9d5f 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -33,10 +33,10 @@ obj-y := cputable.o ptrace.o syscalls.o \ obj-y += vdso32/ obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \ signal_64.o ptrace32.o \ - paca.o cpu_setup_ppc970.o \ - cpu_setup_pa6t.o \ - firmware.o nvram_64.o + paca.o nvram_64.o firmware.o +obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_ppc970.o cpu_setup_pa6t.o obj64-$(CONFIG_RELOCATABLE) += reloc_64.o +obj-$(CONFIG_PPC_BOOK3E_64) += exceptions-64e.o obj-$(CONFIG_PPC64) += vdso64/ obj-$(CONFIG_ALTIVEC) += vecemu.o obj-$(CONFIG_PPC_970_NAP) += idle_power4.o @@ -63,8 +63,8 @@ obj-$(CONFIG_MODULES) += module.o module_$(CONFIG_WORD_SIZE).o obj-$(CONFIG_44x) += cpu_setup_44x.o obj-$(CONFIG_FSL_BOOKE) += cpu_setup_fsl_booke.o dbell.o -extra-$(CONFIG_PPC_STD_MMU) := head_32.o -extra-$(CONFIG_PPC64) := head_64.o +extra-y := head_$(CONFIG_WORD_SIZE).o +extra-$(CONFIG_PPC_BOOK3E_32) := head_new_booke.o extra-$(CONFIG_40x) := head_40x.o extra-$(CONFIG_44x) := head_44x.o extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 4a24a2fc457..f34ea37079b 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -93,7 +93,7 @@ extern void __restore_cpu_power7(void); PPC_FEATURE_BOOKE) static struct cpu_spec __initdata cpu_specs[] = { -#ifdef CONFIG_PPC64 +#ifdef CONFIG_PPC_BOOK3S_64 { /* Power3 */ .pvr_mask = 0xffff0000, .pvr_value = 0x00400000, @@ -508,7 +508,30 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_generic, .platform = "power4", } -#endif /* CONFIG_PPC64 */ +#endif /* CONFIG_PPC_BOOK3S_64 */ +#ifdef CONFIG_PPC_BOOK3E_64 + { /* This is a default entry to get going, to be replaced by + * a real one at some stage + */ +#define CPU_FTRS_BASE_BOOK3E (CPU_FTR_USE_TB | \ + CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_SMT | \ + CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE) + .pvr_mask = 0x00000000, + .pvr_value = 0x00000000, + .cpu_name = "Book3E", + .cpu_features = CPU_FTRS_BASE_BOOK3E, + .cpu_user_features = COMMON_USER_PPC64, + .mmu_features = MMU_FTR_TYPE_3E | MMU_FTR_USE_TLBILX | + MMU_FTR_USE_TLBIVAX_BCAST | + MMU_FTR_LOCK_BCAST_INVAL, + .icache_bsize = 64, + .dcache_bsize = 64, + .num_pmcs = 0, + .machine_check = machine_check_generic, + .platform = "power6", + }, +#endif + #ifdef CONFIG_PPC32 #if CLASSIC_PPC { /* 601 */ diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 1cb0f3d1714..66bcda34a6b 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -120,9 +120,15 @@ BEGIN_FW_FTR_SECTION 2: END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif /* CONFIG_PPC_ISERIES */ + + /* Hard enable interrupts */ +#ifdef CONFIG_PPC_BOOK3E + wrteei 1 +#else mfmsr r11 ori r11,r11,MSR_EE mtmsrd r11,1 +#endif /* CONFIG_PPC_BOOK3E */ #ifdef SHOW_SYSCALLS bl .do_show_syscall @@ -168,15 +174,25 @@ syscall_exit: #endif clrrdi r12,r1,THREAD_SHIFT - /* disable interrupts so current_thread_info()->flags can't change, - and so that we don't get interrupted after loading SRR0/1. */ ld r8,_MSR(r1) +#ifdef CONFIG_PPC_BOOK3S + /* No MSR:RI on BookE */ andi. r10,r8,MSR_RI beq- unrecov_restore +#endif + + /* Disable interrupts so current_thread_info()->flags can't change, + * and so that we don't get interrupted after loading SRR0/1. + */ +#ifdef CONFIG_PPC_BOOK3E + wrteei 0 +#else mfmsr r10 rldicl r10,r10,48,1 rotldi r10,r10,16 mtmsrd r10,1 +#endif /* CONFIG_PPC_BOOK3E */ + ld r9,TI_FLAGS(r12) li r11,-_LAST_ERRNO andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK) @@ -194,9 +210,13 @@ syscall_error_cont: * userspace and we take an exception after restoring r13, * we end up corrupting the userspace r13 value. */ +#ifdef CONFIG_PPC_BOOK3S + /* No MSR:RI on BookE */ li r12,MSR_RI andc r11,r10,r12 mtmsrd r11,1 /* clear MSR.RI */ +#endif /* CONFIG_PPC_BOOK3S */ + beq- 1f ACCOUNT_CPU_USER_EXIT(r11, r12) ld r13,GPR13(r1) /* only restore r13 if returning to usermode */ @@ -206,7 +226,7 @@ syscall_error_cont: mtcr r5 mtspr SPRN_SRR0,r7 mtspr SPRN_SRR1,r8 - rfid + RFI b . /* prevent speculative execution */ syscall_error: @@ -276,9 +296,13 @@ syscall_exit_work: beq .ret_from_except_lite /* Re-enable interrupts */ +#ifdef CONFIG_PPC_BOOK3E + wrteei 1 +#else mfmsr r10 ori r10,r10,MSR_EE mtmsrd r10,1 +#endif /* CONFIG_PPC_BOOK3E */ bl .save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD @@ -380,7 +404,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) and. r0,r0,r22 beq+ 1f andc r22,r22,r0 - mtmsrd r22 + MTMSRD(r22) isync 1: std r20,_NIP(r1) mfcr r23 @@ -399,6 +423,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) std r6,PACACURRENT(r13) /* Set new 'current' */ ld r8,KSP(r4) /* new stack pointer */ +#ifdef CONFIG_PPC_BOOK3S BEGIN_FTR_SECTION BEGIN_FTR_SECTION_NESTED(95) clrrdi r6,r8,28 /* get its ESID */ @@ -445,8 +470,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_1T_SEGMENT) slbie r6 /* Workaround POWER5 < DD2.1 issue */ slbmte r7,r0 isync - 2: +#endif /* !CONFIG_PPC_BOOK3S */ + clrrdi r7,r8,THREAD_SHIFT /* base of new stack */ /* Note: this uses SWITCH_FRAME_SIZE rather than INT_FRAME_SIZE because we don't need to leave the 288-byte ABI gap at the @@ -490,10 +516,14 @@ _GLOBAL(ret_from_except_lite) * can't change between when we test it and when we return * from the interrupt. */ +#ifdef CONFIG_PPC_BOOK3E + wrteei 0 +#else mfmsr r10 /* Get current interrupt state */ rldicl r9,r10,48,1 /* clear MSR_EE */ rotldi r9,r9,16 mtmsrd r9,1 /* Update machine state */ +#endif /* CONFIG_PPC_BOOK3E */ #ifdef CONFIG_PREEMPT clrrdi r9,r1,THREAD_SHIFT /* current_thread_info() */ @@ -540,6 +570,9 @@ ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES) rldicl r4,r3,49,63 /* r0 = (r3 >> 15) & 1 */ stb r4,PACAHARDIRQEN(r13) +#ifdef CONFIG_PPC_BOOK3E + b .exception_return_book3e +#else ld r4,_CTR(r1) ld r0,_LINK(r1) mtctr r4 @@ -588,6 +621,8 @@ ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES) rfid b . /* prevent speculative execution */ +#endif /* CONFIG_PPC_BOOK3E */ + iseries_check_pending_irqs: #ifdef CONFIG_PPC_ISERIES ld r5,SOFTE(r1) @@ -638,6 +673,11 @@ do_work: li r0,1 stb r0,PACASOFTIRQEN(r13) stb r0,PACAHARDIRQEN(r13) +#ifdef CONFIG_PPC_BOOK3E + wrteei 1 + bl .preempt_schedule + wrteei 0 +#else ori r10,r10,MSR_EE mtmsrd r10,1 /* reenable interrupts */ bl .preempt_schedule @@ -646,6 +686,7 @@ do_work: rldicl r10,r10,48,1 /* disable interrupts again */ rotldi r10,r10,16 mtmsrd r10,1 +#endif /* CONFIG_PPC_BOOK3E */ ld r4,TI_FLAGS(r9) andi. r0,r4,_TIF_NEED_RESCHED bne 1b @@ -654,8 +695,12 @@ do_work: user_work: #endif /* Enable interrupts */ +#ifdef CONFIG_PPC_BOOK3E + wrteei 1 +#else ori r10,r10,MSR_EE mtmsrd r10,1 +#endif /* CONFIG_PPC_BOOK3E */ andi. r0,r4,_TIF_NEED_RESCHED beq 1f @@ -837,6 +882,10 @@ _GLOBAL(enter_prom) /* Switch MSR to 32 bits mode */ +#ifdef CONFIG_PPC_BOOK3E + rlwinm r11,r11,0,1,31 + mtmsr r11 +#else /* CONFIG_PPC_BOOK3E */ mfmsr r11 li r12,1 rldicr r12,r12,MSR_SF_LG,(63-MSR_SF_LG) @@ -845,6 +894,7 @@ _GLOBAL(enter_prom) rldicr r12,r12,MSR_ISF_LG,(63-MSR_ISF_LG) andc r11,r11,r12 mtmsrd r11 +#endif /* CONFIG_PPC_BOOK3E */ isync /* Enter PROM here... */ diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S new file mode 100644 index 00000000000..695d4847d22 --- /dev/null +++ b/arch/powerpc/kernel/exceptions-64e.S @@ -0,0 +1,784 @@ +/* + * Boot code and exception vectors for Book3E processors + * + * Copyright (C) 2007 Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/threads.h> +#include <asm/reg.h> +#include <asm/page.h> +#include <asm/ppc_asm.h> +#include <asm/asm-offsets.h> +#include <asm/cputable.h> +#include <asm/setup.h> +#include <asm/thread_info.h> +#include <asm/reg.h> +#include <asm/exception-64e.h> +#include <asm/bug.h> +#include <asm/irqflags.h> +#include <asm/ptrace.h> +#include <asm/ppc-opcode.h> +#include <asm/mmu.h> + +/* XXX This will ultimately add space for a special exception save + * structure used to save things like SRR0/SRR1, SPRGs, MAS, etc... + * when taking special interrupts. For now we don't support that, + * special interrupts from within a non-standard level will probably + * blow you up + */ +#define SPECIAL_EXC_FRAME_SIZE INT_FRAME_SIZE + +/* Exception prolog code for all exceptions */ +#define EXCEPTION_PROLOG(n, type, addition) \ + mtspr SPRN_SPRG_##type##_SCRATCH,r13; /* get spare registers */ \ + mfspr r13,SPRN_SPRG_PACA; /* get PACA */ \ + std r10,PACA_EX##type+EX_R10(r13); \ + std r11,PACA_EX##type+EX_R11(r13); \ + mfcr r10; /* save CR */ \ + addition; /* additional code for that exc. */ \ + std r1,PACA_EX##type+EX_R1(r13); /* save old r1 in the PACA */ \ + stw r10,PACA_EX##type+EX_CR(r13); /* save old CR in the PACA */ \ + mfspr r11,SPRN_##type##_SRR1;/* what are we coming from */ \ + type##_SET_KSTACK; /* get special stack if necessary */\ + andi. r10,r11,MSR_PR; /* save stack pointer */ \ + beq 1f; /* branch around if supervisor */ \ + ld r1,PACAKSAVE(r13); /* get kernel stack coming from usr */\ +1: cmpdi cr1,r1,0; /* check if SP makes sense */ \ + bge- cr1,exc_##n##_bad_stack;/* bad stack (TODO: out of line) */ \ + mfspr r10,SPRN_##type##_SRR0; /* read SRR0 before touching stack */ + +/* Exception type-specific macros */ +#define GEN_SET_KSTACK \ + subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */ +#define SPRN_GEN_SRR0 SPRN_SRR0 +#define SPRN_GEN_SRR1 SPRN_SRR1 + +#define CRIT_SET_KSTACK \ + ld r1,PACA_CRIT_STACK(r13); \ + subi r1,r1,SPECIAL_EXC_FRAME_SIZE; +#define SPRN_CRIT_SRR0 SPRN_CSRR0 +#define SPRN_CRIT_SRR1 SPRN_CSRR1 + +#define DBG_SET_KSTACK \ + ld r1,PACA_DBG_STACK(r13); \ + subi r1,r1,SPECIAL_EXC_FRAME_SIZE; +#define SPRN_DBG_SRR0 SPRN_DSRR0 +#define SPRN_DBG_SRR1 SPRN_DSRR1 + +#define MC_SET_KSTACK \ + ld r1,PACA_MC_STACK(r13); \ + subi r1,r1,SPECIAL_EXC_FRAME_SIZE; +#define SPRN_MC_SRR0 SPRN_MCSRR0 +#define SPRN_MC_SRR1 SPRN_MCSRR1 + +#define NORMAL_EXCEPTION_PROLOG(n, addition) \ + EXCEPTION_PROLOG(n, GEN, addition##_GEN) + +#define CRIT_EXCEPTION_PROLOG(n, addition) \ + EXCEPTION_PROLOG(n, CRIT, addition##_CRIT) + +#define DBG_EXCEPTION_PROLOG(n, addition) \ + EXCEPTION_PROLOG(n, DBG, addition##_DBG) + +#define MC_EXCEPTION_PROLOG(n, addition) \ + EXCEPTION_PROLOG(n, MC, addition##_MC) + + +/* Variants of the "addition" argument for the prolog + */ +#define PROLOG_ADDITION_NONE_GEN +#define PROLOG_ADDITION_NONE_CRIT +#define PROLOG_ADDITION_NONE_DBG +#define PROLOG_ADDITION_NONE_MC + +#define PROLOG_ADDITION_MASKABLE_GEN \ + lbz r11,PACASOFTIRQEN(r13); /* are irqs soft-disabled ? */ \ + cmpwi cr0,r11,0; /* yes -> go out of line */ \ + beq masked_interrupt_book3e; + +#define PROLOG_ADDITION_2REGS_GEN \ + std r14,PACA_EXGEN+EX_R14(r13); \ + std r15,PACA_EXGEN+EX_R15(r13) + +#define PROLOG_ADDITION_1REG_GEN \ + std r14,PACA_EXGEN+EX_R14(r13); + +#define PROLOG_ADDITION_2REGS_CRIT \ + std r14,PACA_EXCRIT+EX_R14(r13); \ + std r15,PACA_EXCRIT+EX_R15(r13) + +#define PROLOG_ADDITION_2REGS_DBG \ + std r14,PACA_EXDBG+EX_R14(r13); \ + std r15,PACA_EXDBG+EX_R15(r13) + +#define PROLOG_ADDITION_2REGS_MC \ + std r14,PACA_EXMC+EX_R14(r13); \ + std r15,PACA_EXMC+EX_R15(r13) + +/* Core exception code for all exceptions except TLB misses. + * XXX: Needs to make SPRN_SPRG_GEN depend on exception type + */ +#define EXCEPTION_COMMON(n, excf, ints) \ + std r0,GPR0(r1); /* save r0 in stackframe */ \ + std r2,GPR2(r1); /* save r2 in stackframe */ \ + SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \ + SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \ + std r9,GPR9(r1); /* save r9 in stackframe */ \ + std r10,_NIP(r1); /* save SRR0 to stackframe */ \ + std r11,_MSR(r1); /* save SRR1 to stackframe */ \ + ACCOUNT_CPU_USER_ENTRY(r10,r11);/* accounting (uses cr0+eq) */ \ + ld r3,excf+EX_R10(r13); /* get back r10 */ \ + ld r4,excf+EX_R11(r13); /* get back r11 */ \ + mfspr r5,SPRN_SPRG_GEN_SCRATCH;/* get back r13 */ \ + std r12,GPR12(r1); /* save r12 in stackframe */ \ + ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \ + mflr r6; /* save LR in stackframe */ \ + mfctr r7; /* save CTR in stackframe */ \ + mfspr r8,SPRN_XER; /* save XER in stackframe */ \ + ld r9,excf+EX_R1(r13); /* load orig r1 back from PACA */ \ + lwz r10,excf+EX_CR(r13); /* load orig CR back from PACA */ \ + lbz r11,PACASOFTIRQEN(r13); /* get current IRQ softe */ \ + ld r12,exception_marker@toc(r2); \ + li r0,0; \ + std r3,GPR10(r1); /* save r10 to stackframe */ \ + std r4,GPR11(r1); /* save r11 to stackframe */ \ + std r5,GPR13(r1); /* save it to stackframe */ \ + std r6,_LINK(r1); \ + std r7,_CTR(r1); \ + std r8,_XER(r1); \ + li r3,(n)+1; /* indicate partial regs in trap */ \ + std r9,0(r1); /* store stack frame back link */ \ + std r10,_CCR(r1); /* store orig CR in stackframe */ \ + std r9,GPR1(r1); /* store stack frame back link */ \ + std r11,SOFTE(r1); /* and save it to stackframe */ \ + std r12,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */ \ + std r3,_TRAP(r1); /* set trap number */ \ + std r0,RESULT(r1); /* clear regs->result */ \ + ints; + +/* Variants for the "ints" argument */ +#define INTS_KEEP +#define INTS_DISABLE_SOFT \ + stb r0,PACASOFTIRQEN(r13); /* mark interrupts soft-disabled */ \ + TRACE_DISABLE_INTS; +#define INTS_DISABLE_HARD \ + stb r0,PACAHARDIRQEN(r13); /* and hard disabled */ +#define INTS_DISABLE_ALL \ + INTS_DISABLE_SOFT \ + INTS_DISABLE_HARD + +/* This is called by exceptions that used INTS_KEEP (that is did not clear + * neither soft nor hard IRQ indicators in the PACA. This will restore MSR:EE + * to it's previous value + * + * XXX In the long run, we may want to open-code it in order to separate the + * load from the wrtee, thus limiting the latency caused by the dependency + * but at this point, I'll favor code clarity until we have a near to final + * implementation + */ +#define INTS_RESTORE_HARD \ + ld r11,_MSR(r1); \ + wrtee r11; + +/* XXX FIXME: Restore r14/r15 when necessary */ +#define BAD_STACK_TRAMPOLINE(n) \ +exc_##n##_bad_stack: \ + li r1,(n); /* get exception number */ \ + sth r1,PACA_TRAP_SAVE(r13); /* store trap */ \ + b bad_stack_book3e; /* bad stack error */ + +#define EXCEPTION_STUB(loc, label) \ + . = interrupt_base_book3e + loc; \ + nop; /* To make debug interrupts happy */ \ + b exc_##label##_book3e; + +#define ACK_NONE(r) +#define ACK_DEC(r) \ + lis r,TSR_DIS@h; \ + mtspr SPRN_TSR,r +#define ACK_FIT(r) \ + lis r,TSR_FIS@h; \ + mtspr SPRN_TSR,r + +#define MASKABLE_EXCEPTION(trapnum, label, hdlr, ack) \ + START_EXCEPTION(label); \ + NORMAL_EXCEPTION_PROLOG(trapnum, PROLOG_ADDITION_MASKABLE) \ + EXCEPTION_COMMON(trapnum, PACA_EXGEN, INTS_DISABLE_ALL) \ + ack(r8); \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + bl hdlr; \ + b .ret_from_except_lite; + +/* This value is used to mark exception frames on the stack. */ + .section ".toc","aw" +exception_marker: + .tc ID_EXC_MARKER[TC],STACK_FRAME_REGS_MARKER + + +/* + * And here we have the exception vectors ! + */ + + .text + .balign 0x1000 + .globl interrupt_base_book3e +interrupt_base_book3e: /* fake trap */ + /* Note: If real debug exceptions are supported by the HW, the vector + * below will have to be patched up to point to an appropriate handler + */ + EXCEPTION_STUB(0x000, machine_check) /* 0x0200 */ + EXCEPTION_STUB(0x020, critical_input) /* 0x0580 */ + EXCEPTION_STUB(0x040, debug_crit) /* 0x0d00 */ + EXCEPTION_STUB(0x060, data_storage) /* 0x0300 */ + EXCEPTION_STUB(0x080, instruction_storage) /* 0x0400 */ + EXCEPTION_STUB(0x0a0, external_input) /* 0x0500 */ + EXCEPTION_STUB(0x0c0, alignment) /* 0x0600 */ + EXCEPTION_STUB(0x0e0, program) /* 0x0700 */ + EXCEPTION_STUB(0x100, fp_unavailable) /* 0x0800 */ + EXCEPTION_STUB(0x120, system_call) /* 0x0c00 */ + EXCEPTION_STUB(0x140, ap_unavailable) /* 0x0f20 */ + EXCEPTION_STUB(0x160, decrementer) /* 0x0900 */ + EXCEPTION_STUB(0x180, fixed_interval) /* 0x0980 */ + EXCEPTION_STUB(0x1a0, watchdog) /* 0x09f0 */ + EXCEPTION_STUB(0x1c0, data_tlb_miss) + EXCEPTION_STUB(0x1e0, instruction_tlb_miss) + +#if 0 + EXCEPTION_STUB(0x280, processor_doorbell) + EXCEPTION_STUB(0x220, processor_doorbell_crit) +#endif + .globl interrupt_end_book3e +interrupt_end_book3e: + +/* Critical Input Interrupt */ + START_EXCEPTION(critical_input); + CRIT_EXCEPTION_PROLOG(0x100, PROLOG_ADDITION_NONE) +// EXCEPTION_COMMON(0x100, PACA_EXCRIT, INTS_DISABLE_ALL) +// bl special_reg_save_crit +// addi r3,r1,STACK_FRAME_OVERHEAD +// bl .critical_exception +// b ret_from_crit_except + b . + +/* Machine Check Interrupt */ + START_EXCEPTION(machine_check); + CRIT_EXCEPTION_PROLOG(0x200, PROLOG_ADDITION_NONE) +// EXCEPTION_COMMON(0x200, PACA_EXMC, INTS_DISABLE_ALL) +// bl special_reg_save_mc +// addi r3,r1,STACK_FRAME_OVERHEAD +// bl .machine_check_exception +// b ret_from_mc_except + b . + +/* Data Storage Interrupt */ + START_EXCEPTION(data_storage) + NORMAL_EXCEPTION_PROLOG(0x300, PROLOG_ADDITION_2REGS) + mfspr r14,SPRN_DEAR + mfspr r15,SPRN_ESR + EXCEPTION_COMMON(0x300, PACA_EXGEN, INTS_KEEP) + b storage_fault_common + +/* Instruction Storage Interrupt */ + START_EXCEPTION(instruction_storage); + NORMAL_EXCEPTION_PROLOG(0x400, PROLOG_ADDITION_2REGS) + li r15,0 + mr r14,r10 + EXCEPTION_COMMON(0x400, PACA_EXGEN, INTS_KEEP) + b storage_fault_common + +/* External Input Interrupt */ + MASKABLE_EXCEPTION(0x500, external_input, .do_IRQ, ACK_NONE) + +/* Alignment */ + START_EXCEPTION(alignment); + NORMAL_EXCEPTION_PROLOG(0x600, PROLOG_ADDITION_2REGS) + mfspr r14,SPRN_DEAR + mfspr r15,SPRN_ESR + EXCEPTION_COMMON(0x600, PACA_EXGEN, INTS_KEEP) + b alignment_more /* no room, go out of line */ + +/* Program Interrupt */ + START_EXCEPTION(program); + NORMAL_EXCEPTION_PROLOG(0x700, PROLOG_ADDITION_1REG) + mfspr r14,SPRN_ESR + EXCEPTION_COMMON(0x700, PACA_EXGEN, INTS_DISABLE_SOFT) + std r14,_DSISR(r1) + addi r3,r1,STACK_FRAME_OVERHEAD + ld r14,PACA_EXGEN+EX_R14(r13) + bl .save_nvgprs + INTS_RESTORE_HARD + bl .program_check_exception + b .ret_from_except + +/* Floating Point Unavailable Interrupt */ + START_EXCEPTION(fp_unavailable); + NORMAL_EXCEPTION_PROLOG(0x800, PROLOG_ADDITION_NONE) + /* we can probably do a shorter exception entry for that one... */ + EXCEPTION_COMMON(0x800, PACA_EXGEN, INTS_KEEP) + bne 1f /* if from user, just load it up */ + bl .save_nvgprs + addi r3,r1,STACK_FRAME_OVERHEAD + INTS_RESTORE_HARD + bl .kernel_fp_unavailable_exception + BUG_OPCODE +1: ld r12,_MSR(r1) + bl .load_up_fpu + b fast_exception_return + +/* Decrementer Interrupt */ + MASKABLE_EXCEPTION(0x900, decrementer, .timer_interrupt, ACK_DEC) + +/* Fixed Interval Timer Interrupt */ + MASKABLE_EXCEPTION(0x980, fixed_interval, .unknown_exception, ACK_FIT) + +/* Watchdog Timer Interrupt */ + START_EXCEPTION(watchdog); + CRIT_EXCEPTION_PROLOG(0x9f0, PROLOG_ADDITION_NONE) +// EXCEPTION_COMMON(0x9f0, PACA_EXCRIT, INTS_DISABLE_ALL) +// bl special_reg_save_crit +// addi r3,r1,STACK_FRAME_OVERHEAD +// bl .unknown_exception +// b ret_from_crit_except + b . + +/* System Call Interrupt */ + START_EXCEPTION(system_call) + mr r9,r13 /* keep a copy of userland r13 */ + mfspr r11,SPRN_SRR0 /* get return address */ + mfspr r12,SPRN_SRR1 /* get previous MSR */ + mfspr r13,SPRN_SPRG_PACA /* get our PACA */ + b system_call_common + +/* Auxillary Processor Unavailable Interrupt */ + START_EXCEPTION(ap_unavailable); + NORMAL_EXCEPTION_PROLOG(0xf20, PROLOG_ADDITION_NONE) + EXCEPTION_COMMON(0xf20, PACA_EXGEN, INTS_KEEP) + addi r3,r1,STACK_FRAME_OVERHEAD + bl .save_nvgprs + INTS_RESTORE_HARD + bl .unknown_exception + b .ret_from_except + +/* Debug exception as a critical interrupt*/ + START_EXCEPTION(debug_crit); + CRIT_EXCEPTION_PROLOG(0xd00, PROLOG_ADDITION_2REGS) + + /* + * If there is a single step or branch-taken exception in an + * exception entry sequence, it was probably meant to apply to + * the code where the exception occurred (since exception entry + * doesn't turn off DE automatically). We simulate the effect + * of turning off DE on entry to an exception handler by turning + * off DE in the CSRR1 value and clearing the debug status. + */ + + mfspr r14,SPRN_DBSR /* check single-step/branch taken */ + andis. r15,r14,DBSR_IC@h + beq+ 1f + + LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e) + LOAD_REG_IMMEDIATE(r15,interrupt_end_book3e) + cmpld cr0,r10,r14 + cmpld cr1,r10,r15 + blt+ cr0,1f + bge+ cr1,1f + + /* here it looks like we got an inappropriate debug exception. */ + lis r14,DBSR_IC@h /* clear the IC event */ + rlwinm r11,r11,0,~MSR_DE /* clear DE in the CSRR1 value */ + mtspr SPRN_DBSR,r14 + mtspr SPRN_CSRR1,r11 + lwz r10,PACA_EXCRIT+EX_CR(r13) /* restore registers */ + ld r1,PACA_EXCRIT+EX_R1(r13) + ld r14,PACA_EXCRIT+EX_R14(r13) + ld r15,PACA_EXCRIT+EX_R15(r13) + mtcr r10 + ld r10,PACA_EXCRIT+EX_R10(r13) /* restore registers */ + ld r11,PACA_EXCRIT+EX_R11(r13) + mfspr r13,SPRN_SPRG_CRIT_SCRATCH + rfci + + /* Normal debug exception */ + /* XXX We only handle coming from userspace for now since we can't + * quite save properly an interrupted kernel state yet + */ +1: andi. r14,r11,MSR_PR; /* check for userspace again */ + beq kernel_dbg_exc; /* if from kernel mode */ + + /* Now we mash up things to make it look like we are coming on a + * normal exception + */ + mfspr r15,SPRN_SPRG_CRIT_SCRATCH + mtspr SPRN_SPRG_GEN_SCRATCH,r15 + mfspr r14,SPRN_DBSR + EXCEPTION_COMMON(0xd00, PACA_EXCRIT, INTS_DISABLE_ALL) + std r14,_DSISR(r1) + addi r3,r1,STACK_FRAME_OVERHEAD + mr r4,r14 + ld r14,PACA_EXCRIT+EX_R14(r13) + ld r15,PACA_EXCRIT+EX_R15(r13) + bl .save_nvgprs + bl .DebugException + b .ret_from_except + +kernel_dbg_exc: + b . /* NYI */ + + +/* + * An interrupt came in while soft-disabled; clear EE in SRR1, + * clear paca->hard_enabled and return. + */ +masked_interrupt_book3e: + mtcr r10 + stb r11,PACAHARDIRQEN(r13) + mfspr r10,SPRN_SRR1 + rldicl r11,r10,48,1 /* clear MSR_EE */ + rotldi r10,r11,16 + mtspr SPRN_SRR1,r10 + ld r10,PACA_EXGEN+EX_R10(r13); /* restore registers */ + ld r11,PACA_EXGEN+EX_R11(r13); + mfspr r13,SPRN_SPRG_GEN_SCRATCH; + rfi + b . + +/* + * This is called from 0x300 and 0x400 handlers after the prologs with + * r14 and r15 containing the fault address and error code, with the + * original values stashed away in the PACA + */ +storage_fault_common: + std r14,_DAR(r1) + std r15,_DSISR(r1) + addi r3,r1,STACK_FRAME_OVERHEAD + mr r4,r14 + mr r5,r15 + ld r14,PACA_EXGEN+EX_R14(r13) + ld r15,PACA_EXGEN+EX_R15(r13) + INTS_RESTORE_HARD + bl .do_page_fault + cmpdi r3,0 + bne- 1f + b .ret_from_except_lite +1: bl .save_nvgprs + mr r5,r3 + addi r3,r1,STACK_FRAME_OVERHEAD + ld r4,_DAR(r1) + bl .bad_page_fault + b .ret_from_except + +/* + * Alignment exception doesn't fit entirely in the 0x100 bytes so it + * continues here. + */ +alignment_more: + std r14,_DAR(r1) + std r15,_DSISR(r1) + addi r3,r1,STACK_FRAME_OVERHEAD + ld r14,PACA_EXGEN+EX_R14(r13) + ld r15,PACA_EXGEN+EX_R15(r13) + bl .save_nvgprs + INTS_RESTORE_HARD + bl .alignment_exception + b .ret_from_except + +/* + * We branch here from entry_64.S for the last stage of the exception + * return code path. MSR:EE is expected to be off at that point + */ +_GLOBAL(exception_return_book3e) + b 1f + +/* This is the return from load_up_fpu fast path which could do with + * less GPR restores in fact, but for now we have a single return path + */ + .globl fast_exception_return +fast_exception_return: + wrteei 0 +1: mr r0,r13 + ld r10,_MSR(r1) + REST_4GPRS(2, r1) + andi. r6,r10,MSR_PR + REST_2GPRS(6, r1) + beq 1f + ACCOUNT_CPU_USER_EXIT(r10, r11) + ld r0,GPR13(r1) + +1: stdcx. r0,0,r1 /* to clear the reservation */ + + ld r8,_CCR(r1) + ld r9,_LINK(r1) + ld r10,_CTR(r1) + ld r11,_XER(r1) + mtcr r8 + mtlr r9 + mtctr r10 + mtxer r11 + REST_2GPRS(8, r1) + ld r10,GPR10(r1) + ld r11,GPR11(r1) + ld r12,GPR12(r1) + mtspr SPRN_SPRG_GEN_SCRATCH,r0 + + std r10,PACA_EXGEN+EX_R10(r13); + std r11,PACA_EXGEN+EX_R11(r13); + ld r10,_NIP(r1) + ld r11,_MSR(r1) + ld r0,GPR0(r1) + ld r1,GPR1(r1) + mtspr SPRN_SRR0,r10 + mtspr SPRN_SRR1,r11 + ld r10,PACA_EXGEN+EX_R10(r13) + ld r11,PACA_EXGEN+EX_R11(r13) + mfspr r13,SPRN_SPRG_GEN_SCRATCH + rfi + +/* + * Trampolines used when spotting a bad kernel stack pointer in + * the exception entry code. + * + * TODO: move some bits like SRR0 read to trampoline, pass PACA + * index around, etc... to handle crit & mcheck + */ +BAD_STACK_TRAMPOLINE(0x000) +BAD_STACK_TRAMPOLINE(0x100) +BAD_STACK_TRAMPOLINE(0x200) +BAD_STACK_TRAMPOLINE(0x300) +BAD_STACK_TRAMPOLINE(0x400) +BAD_STACK_TRAMPOLINE(0x500) +BAD_STACK_TRAMPOLINE(0x600) +BAD_STACK_TRAMPOLINE(0x700) +BAD_STACK_TRAMPOLINE(0x800) +BAD_STACK_TRAMPOLINE(0x900) +BAD_STACK_TRAMPOLINE(0x980) +BAD_STACK_TRAMPOLINE(0x9f0) +BAD_STACK_TRAMPOLINE(0xa00) +BAD_STACK_TRAMPOLINE(0xb00) +BAD_STACK_TRAMPOLINE(0xc00) +BAD_STACK_TRAMPOLINE(0xd00) +BAD_STACK_TRAMPOLINE(0xe00) +BAD_STACK_TRAMPOLINE(0xf00) +BAD_STACK_TRAMPOLINE(0xf20) + + .globl bad_stack_book3e +bad_stack_book3e: + /* XXX: Needs to make SPRN_SPRG_GEN depend on exception type */ + mfspr r10,SPRN_SRR0; /* read SRR0 before touching stack */ + ld r1,PACAEMERGSP(r13) + subi r1,r1,64+INT_FRAME_SIZE + std r10,_NIP(r1) + std r11,_MSR(r1) + ld r10,PACA_EXGEN+EX_R1(r13) /* FIXME for crit & mcheck */ + lwz r11,PACA_EXGEN+EX_CR(r13) /* FIXME for crit & mcheck */ + std r10,GPR1(r1) + std r11,_CCR(r1) + mfspr r10,SPRN_DEAR + mfspr r11,SPRN_ESR + std r10,_DAR(r1) + std r11,_DSISR(r1) + std r0,GPR0(r1); /* save r0 in stackframe */ \ + std r2,GPR2(r1); /* save r2 in stackframe */ \ + SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \ + SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \ + std r9,GPR9(r1); /* save r9 in stackframe */ \ + ld r3,PACA_EXGEN+EX_R10(r13);/* get back r10 */ \ + ld r4,PACA_EXGEN+EX_R11(r13);/* get back r11 */ \ + mfspr r5,SPRN_SPRG_GEN_SCRATCH;/* get back r13 XXX can be wrong */ \ + std r3,GPR10(r1); /* save r10 to stackframe */ \ + std r4,GPR11(r1); /* save r11 to stackframe */ \ + std r12,GPR12(r1); /* save r12 in stackframe */ \ + std r5,GPR13(r1); /* save it to stackframe */ \ + mflr r10 + mfctr r11 + mfxer r12 + std r10,_LINK(r1) + std r11,_CTR(r1) + std r12,_XER(r1) + SAVE_10GPRS(14,r1) + SAVE_8GPRS(24,r1) + lhz r12,PACA_TRAP_SAVE(r13) + std r12,_TRAP(r1) + addi r11,r1,INT_FRAME_SIZE + std r11,0(r1) + li r12,0 + std r12,0(r11) + ld r2,PACATOC(r13) +1: addi r3,r1,STACK_FRAME_OVERHEAD + bl .kernel_bad_stack + b 1b + +/* + * Setup the initial TLB for a core. This current implementation + * assume that whatever we are running off will not conflict with + * the new mapping at PAGE_OFFSET. + * We also make various assumptions about the processor we run on, + * this might have to be made more flexible based on the content + * of MMUCFG and friends. + */ +_GLOBAL(initial_tlb_book3e) + + /* Setup MAS 0,1,2,3 and 7 for tlbwe of a 1G entry that maps the + * kernel linear mapping. We also set MAS8 once for all here though + * that will have to be made dependent on whether we are running under + * a hypervisor I suppose. + */ + li r3,MAS0_HES | MAS0_WQ_ALLWAYS + mtspr SPRN_MAS0,r3 + lis r3,(MAS1_VALID | MAS1_IPROT)@h + ori r3,r3,BOOK3E_PAGESZ_1GB << MAS1_TSIZE_SHIFT + mtspr SPRN_MAS1,r3 + LOAD_REG_IMMEDIATE(r3, PAGE_OFFSET | MAS2_M) + mtspr SPRN_MAS2,r3 + li r3,MAS3_SR | MAS3_SW | MAS3_SX + mtspr SPRN_MAS7_MAS3,r3 + li r3,0 + mtspr SPRN_MAS8,r3 + + /* Write the TLB entry */ + tlbwe + + /* Now we branch the new virtual address mapped by this entry */ + LOAD_REG_IMMEDIATE(r3,1f) + mtctr r3 + bctr + +1: /* We are now running at PAGE_OFFSET, clean the TLB of everything + * else (XXX we should scan for bolted crap from the firmware too) + */ + PPC_TLBILX(0,0,0) + sync + isync + + /* We translate LR and return */ + mflr r3 + tovirt(r3,r3) + mtlr r3 + blr + +/* + * Main entry (boot CPU, thread 0) + * + * We enter here from head_64.S, possibly after the prom_init trampoline + * with r3 and r4 already saved to r31 and 30 respectively and in 64 bits + * mode. Anything else is as it was left by the bootloader + * + * Initial requirements of this port: + * + * - Kernel loaded at 0 physical + * - A good lump of memory mapped 0:0 by UTLB entry 0 + * - MSR:IS & MSR:DS set to 0 + * + * Note that some of the above requirements will be relaxed in the future + * as the kernel becomes smarter at dealing with different initial conditions + * but for now you have to be careful + */ +_GLOBAL(start_initialization_book3e) + mflr r28 + + /* First, we need to setup some initial TLBs to map the kernel + * text, data and bss at PAGE_OFFSET. We don't have a real mode + * and always use AS 0, so we just set it up to match our link + * address and never use 0 based addresses. + */ + bl .initial_tlb_book3e + + /* Init global core bits */ + bl .init_core_book3e + + /* Init per-thread bits */ + bl .init_thread_book3e + + /* Return to common init code */ + tovirt(r28,r28) + mtlr r28 + blr + + +/* + * Secondary core/processor entry + * + * This is entered for thread 0 of a secondary core, all other threads + * are expected to be stopped. It's similar to start_initialization_book3e + * except that it's generally entered from the holding loop in head_64.S + * after CPUs have been gathered by Open Firmware. + * + * We assume we are in 32 bits mode running with whatever TLB entry was + * set for us by the firmware or POR engine. + */ +_GLOBAL(book3e_secondary_core_init_tlb_set) + li r4,1 + b .generic_secondary_smp_init + +_GLOBAL(book3e_secondary_core_init) + mflr r28 + + /* Do we need to setup initial TLB entry ? */ + cmplwi r4,0 + bne 2f + + /* Setup TLB for this core */ + bl .initial_tlb_book3e + + /* We can return from the above running at a different + * address, so recalculate r2 (TOC) + */ + bl .relative_toc + + /* Init global core bits */ +2: bl .init_core_book3e + + /* Init per-thread bits */ +3: bl .init_thread_book3e + + /* Return to common init code at proper virtual address. + * + * Due to various previous assumptions, we know we entered this + * function at either the final PAGE_OFFSET mapping or using a + * 1:1 mapping at 0, so we don't bother doing a complicated check + * here, we just ensure the return address has the right top bits. + * + * Note that if we ever want to be smarter about where we can be + * started from, we have to be careful that by the time we reach + * the code below we may already be running at a different location + * than the one we were called from since initial_tlb_book3e can + * have moved us already. + */ + cmpdi cr0,r28,0 + blt 1f + lis r3,PAGE_OFFSET@highest + sldi r3,r3,32 + or r28,r28,r3 +1: mtlr r28 + blr + +_GLOBAL(book3e_secondary_thread_init) + mflr r28 + b 3b + +_STATIC(init_core_book3e) + /* Establish the interrupt vector base */ + LOAD_REG_IMMEDIATE(r3, interrupt_base_book3e) + mtspr SPRN_IVPR,r3 + sync + blr + +_STATIC(init_thread_book3e) + lis r3,(SPRN_EPCR_ICM | SPRN_EPCR_GICM)@h + mtspr SPRN_EPCR,r3 + + /* Make sure interrupts are off */ + wrteei 0 + + /* disable watchdog and FIT and enable DEC interrupts */ + lis r3,TCR_DIE@h + mtspr SPRN_TCR,r3 + + blr + + + diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 0552f01041a..c38afdb45d7 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -121,10 +121,11 @@ __run_at_load: */ .globl __secondary_hold __secondary_hold: +#ifndef CONFIG_PPC_BOOK3E mfmsr r24 ori r24,r24,MSR_RI mtmsrd r24 /* RI on */ - +#endif /* Grab our physical cpu number */ mr r24,r3 @@ -143,6 +144,7 @@ __secondary_hold: ld r4,0(r4) /* deref function descriptor */ mtctr r4 mr r3,r24 + li r4,0 bctr #else BUG_OPCODE @@ -163,21 +165,49 @@ exception_marker: #include "exceptions-64s.S" #endif +_GLOBAL(generic_secondary_thread_init) + mr r24,r3 + + /* turn on 64-bit mode */ + bl .enable_64b_mode + + /* get a valid TOC pointer, wherever we're mapped at */ + bl .relative_toc + +#ifdef CONFIG_PPC_BOOK3E + /* Book3E initialization */ + mr r3,r24 + bl .book3e_secondary_thread_init +#endif + b generic_secondary_common_init /* * On pSeries and most other platforms, secondary processors spin * in the following code. * At entry, r3 = this processor's number (physical cpu id) + * + * On Book3E, r4 = 1 to indicate that the initial TLB entry for + * this core already exists (setup via some other mechanism such + * as SCOM before entry). */ _GLOBAL(generic_secondary_smp_init) mr r24,r3 - + mr r25,r4 + /* turn on 64-bit mode */ bl .enable_64b_mode - /* get the TOC pointer (real address) */ + /* get a valid TOC pointer, wherever we're mapped at */ bl .relative_toc +#ifdef CONFIG_PPC_BOOK3E + /* Book3E initialization */ + mr r3,r24 + mr r4,r25 + bl .book3e_secondary_core_init +#endif + +generic_secondary_common_init: /* Set up a paca value for this processor. Since we have the * physical cpu id in r24, we need to search the pacas to find * which logical id maps to our physical one. @@ -196,6 +226,11 @@ _GLOBAL(generic_secondary_smp_init) b .kexec_wait /* next kernel might do better */ 2: mtspr SPRN_SPRG_PACA,r13 /* Save vaddr of paca in an SPRG */ +#ifdef CONFIG_PPC_BOOK3E + addi r12,r13,PACA_EXTLB /* and TLB exc frame in another */ + mtspr SPRN_SPRG_TLB_EXFRAME,r12 +#endif + /* From now on, r24 is expected to be logical cpuid */ mr r24,r5 3: HMT_LOW @@ -231,6 +266,7 @@ _GLOBAL(generic_secondary_smp_init) * Turn the MMU off. * Assumes we're mapped EA == RA if the MMU is on. */ +#ifdef CONFIG_PPC_BOOK3S _STATIC(__mmu_off) mfmsr r3 andi. r0,r3,MSR_IR|MSR_DR @@ -242,6 +278,7 @@ _STATIC(__mmu_off) sync rfid b . /* prevent speculative execution */ +#endif /* @@ -279,6 +316,10 @@ _GLOBAL(__start_initialization_multiplatform) mr r31,r3 mr r30,r4 +#ifdef CONFIG_PPC_BOOK3E + bl .start_initialization_book3e + b .__after_prom_start +#else /* Setup some critical 970 SPRs before switching MMU off */ mfspr r0,SPRN_PVR srwi r0,r0,16 @@ -296,6 +337,7 @@ _GLOBAL(__start_initialization_multiplatform) /* Switch off MMU if not already off */ bl .__mmu_off b .__after_prom_start +#endif /* CONFIG_PPC_BOOK3E */ _INIT_STATIC(__boot_from_prom) #ifdef CONFIG_PPC_OF_BOOT_TRAMPOLINE @@ -358,10 +400,16 @@ _STATIC(__after_prom_start) * Note: This process overwrites the OF exception vectors. */ li r3,0 /* target addr */ +#ifdef CONFIG_PPC_BOOK3E + tovirt(r3,r3) /* on booke, we already run at PAGE_OFFSET */ +#endif mr. r4,r26 /* In some cases the loader may */ beq 9f /* have already put us at zero */ li r6,0x100 /* Start offset, the first 0x100 */ /* bytes were copied earlier. */ +#ifdef CONFIG_PPC_BOOK3E + tovirt(r6,r6) /* on booke, we already run at PAGE_OFFSET */ +#endif #ifdef CONFIG_CRASH_DUMP /* @@ -507,6 +555,9 @@ _GLOBAL(pmac_secondary_start) * r13 = paca virtual address * SPRG_PACA = paca virtual address */ + .section ".text"; + .align 2 ; + .globl __secondary_start __secondary_start: /* Set thread priority to MEDIUM */ @@ -543,7 +594,7 @@ END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES) mtspr SPRN_SRR0,r3 mtspr SPRN_SRR1,r4 - rfid + RFI b . /* prevent speculative execution */ /* @@ -564,11 +615,16 @@ _GLOBAL(start_secondary_prolog) */ _GLOBAL(enable_64b_mode) mfmsr r11 /* grab the current MSR */ +#ifdef CONFIG_PPC_BOOK3E + oris r11,r11,0x8000 /* CM bit set, we'll set ICM later */ + mtmsr r11 +#else /* CONFIG_PPC_BOOK3E */ li r12,(MSR_SF | MSR_ISF)@highest sldi r12,r12,48 or r11,r11,r12 mtmsrd r11 isync +#endif blr /* @@ -612,9 +668,11 @@ _INIT_STATIC(start_here_multiplatform) bdnz 3b 4: +#ifndef CONFIG_PPC_BOOK3E mfmsr r6 ori r6,r6,MSR_RI mtmsrd r6 /* RI on */ +#endif #ifdef CONFIG_RELOCATABLE /* Save the physical address we're running at in kernstart_addr */ @@ -647,7 +705,7 @@ _INIT_STATIC(start_here_multiplatform) ld r4,PACAKMSR(r13) mtspr SPRN_SRR0,r3 mtspr SPRN_SRR1,r4 - rfid + RFI b . /* prevent speculative execution */ /* This is where all platforms converge execution */ diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 65aced7b833..87df5172064 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -454,6 +454,24 @@ static void __init irqstack_early_init(void) #define irqstack_early_init() #endif +#ifdef CONFIG_PPC_BOOK3E +static void __init exc_lvl_early_init(void) +{ + unsigned int i; + + for_each_possible_cpu(i) { + critirq_ctx[i] = (struct thread_info *) + __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE)); + dbgirq_ctx[i] = (struct thread_info *) + __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE)); + mcheckirq_ctx[i] = (struct thread_info *) + __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE)); + } +} +#else +#define exc_lvl_early_init() +#endif + /* * Stack space used when we detect a bad kernel stack pointer, and * early in SMP boots before relocation is enabled. @@ -513,6 +531,7 @@ void __init setup_arch(char **cmdline_p) init_mm.brk = klimit; irqstack_early_init(); + exc_lvl_early_init(); emergency_stack_init(); #ifdef CONFIG_PPC_STD_MMU_64 diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile index 3e68363405b..6fb8fc8d2fe 100644 --- a/arch/powerpc/mm/Makefile +++ b/arch/powerpc/mm/Makefile @@ -13,6 +13,7 @@ obj-y := fault.o mem.o pgtable.o gup.o \ pgtable_$(CONFIG_WORD_SIZE).o obj-$(CONFIG_PPC_MMU_NOHASH) += mmu_context_nohash.o tlb_nohash.o \ tlb_nohash_low.o +obj-$(CONFIG_PPC_BOOK3E) += tlb_low_$(CONFIG_WORD_SIZE)e.o obj-$(CONFIG_PPC64) += mmap_64.o hash64-$(CONFIG_PPC_NATIVE) := hash_native_64.o obj-$(CONFIG_PPC_STD_MMU_64) += hash_utils_64.o \ diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index 61187bec750..9efc8bda01b 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -57,15 +57,35 @@ config E200 endchoice -config PPC_BOOK3S_64 - def_bool y +choice + prompt "Processor Type" depends on PPC64 + help + There are two families of 64 bit PowerPC chips supported. + The most common ones are the desktop and server CPUs + (POWER3, RS64, POWER4, POWER5, POWER5+, POWER6, ...) + + The other are the "embedded" processors compliant with the + "Book 3E" variant of the architecture + +config PPC_BOOK3S_64 + bool "Server processors" select PPC_FPU +config PPC_BOOK3E_64 + bool "Embedded processors" + select PPC_FPU # Make it a choice ? + +endchoice + config PPC_BOOK3S def_bool y depends on PPC_BOOK3S_32 || PPC_BOOK3S_64 +config PPC_BOOK3E + def_bool y + depends on PPC_BOOK3E_64 + config POWER4_ONLY bool "Optimize for POWER4" depends on PPC64 && PPC_BOOK3S @@ -125,7 +145,7 @@ config 4xx config BOOKE bool - depends on E200 || E500 || 44x + depends on E200 || E500 || 44x || PPC_BOOK3E default y config FSL_BOOKE @@ -223,9 +243,17 @@ config PPC_MMU_NOHASH def_bool y depends on !PPC_STD_MMU +config PPC_MMU_NOHASH_32 + def_bool y + depends on PPC_MMU_NOHASH && PPC32 + +config PPC_MMU_NOHASH_64 + def_bool y + depends on PPC_MMU_NOHASH && PPC64 + config PPC_BOOK3E_MMU def_bool y - depends on FSL_BOOKE + depends on FSL_BOOKE || PPC_BOOK3E config PPC_MM_SLICES bool @@ -257,7 +285,7 @@ config PPC_PERF_CTRS This enables the powerpc-specific perf_counter back-end. config SMP - depends on PPC_STD_MMU || FSL_BOOKE + depends on PPC_BOOK3S || PPC_BOOK3E || FSL_BOOKE bool "Symmetric multi-processing support" ---help--- This enables support for systems with more than one CPU. If you have diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index e1f33a81e5e..0e09a45ac79 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -2570,7 +2570,7 @@ static void xmon_print_symbol(unsigned long address, const char *mid, printf("%s", after); } -#ifdef CONFIG_PPC64 +#ifdef CONFIG_PPC_BOOK3S_64 static void dump_slb(void) { int i; |