diff options
| -rw-r--r-- | drivers/usb/serial/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/usb/serial/Makefile | 1 | ||||
| -rw-r--r-- | drivers/usb/serial/zte_ev.c | 307 |
3 files changed, 316 insertions, 0 deletions
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 325d2910f9f..f604f707a05 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -660,6 +660,14 @@ config USB_SERIAL_ZIO To compile this driver as a module, choose M here: the module will be called zio. +config USB_SERIAL_ZTE + tristate "ZTE USB serial driver" + help + Say Y here if you want to use a ZTE USB to serial device. + + To compile this driver as a module, choose M here: the + module will be called zte. + config USB_SERIAL_SSU100 tristate "USB Quatech SSU-100 Single Port Serial Driver" help diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index 1dc483a8bfc..45871f9ad1e 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -63,3 +63,4 @@ obj-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat.o obj-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda.o obj-$(CONFIG_USB_SERIAL_VIVOPAY_SERIAL) += vivopay-serial.o obj-$(CONFIG_USB_SERIAL_ZIO) += zio.o +obj-$(CONFIG_USB_SERIAL_ZTE) += zte_ev.o diff --git a/drivers/usb/serial/zte_ev.c b/drivers/usb/serial/zte_ev.c new file mode 100644 index 00000000000..39ee7373b4e --- /dev/null +++ b/drivers/usb/serial/zte_ev.c @@ -0,0 +1,307 @@ +/* + * ZTE_EV USB serial driver + * + * Copyright (C) 2012 Greg Kroah-Hartman <gregkh@linuxfoundation.org> + * Copyright (C) 2012 Linux Foundation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This driver is based on code found in a ZTE_ENV patch that modified + * the usb-serial generic driver. Comments were left in that I think + * show the commands used to talk to the device, but I am not sure. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/tty.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/uaccess.h> + +#define MAX_SETUP_DATA_SIZE 32 + +static void debug_data(struct device *dev, const char *function, int len, + const unsigned char *data, int result) +{ + dev_dbg(dev, "result = %d\n", result); + if (result == len) + dev_dbg(dev, "%s - length = %d, data = %*ph\n", function, + len, len, data); +} + +static int zte_ev_usb_serial_open(struct tty_struct *tty, + struct usb_serial_port *port) +{ + struct usb_device *udev = port->serial->dev; + struct device *dev = &port->dev; + int result = 0; + int len; + unsigned char *buf; + + if (port->number != 0) + return -ENODEV; + + buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + /* send 1st ctl cmd(CTL 21 22 01 00 00 00 00 00) */ + len = 0; + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x22, 0x21, + 0x0001, 0x0000, NULL, len, + HZ * USB_CTRL_GET_TIMEOUT); + dev_dbg(dev, "result = %d\n", result); + + /* send 2st cmd and recieve data */ + /* + * 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 25.1.0(5) + * 16.0 DI 00 96 00 00 00 00 08 + */ + len = 0x0007; + result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + 0x21, 0xa1, + 0x0000, 0x0000, buf, len, + HZ * USB_CTRL_GET_TIMEOUT); + debug_data(dev, __func__, len, buf, result); + + /* send 3 cmd */ + /* + * 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 30.1.0 + * 16.0 DO 80 25 00 00 00 00 08 .%..... 30.2.0 + */ + len = 0x0007; + buf[0] = 0x80; + buf[1] = 0x25; + buf[2] = 0x00; + buf[3] = 0x00; + buf[4] = 0x00; + buf[5] = 0x00; + buf[6] = 0x08; + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x20, 0x21, + 0x0000, 0x0000, buf, len, + HZ * USB_CTRL_GET_TIMEOUT); + debug_data(dev, __func__, len, buf, result); + + /* send 4 cmd */ + /* + * 16.0 CTL 21 22 03 00 00 00 00 00 + */ + len = 0; + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x22, 0x21, + 0x0003, 0x0000, NULL, len, + HZ * USB_CTRL_GET_TIMEOUT); + dev_dbg(dev, "result = %d\n", result); + + /* send 5 cmd */ + /* + * 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 33.1.0 + * 16.0 DI 80 25 00 00 00 00 08 + */ + len = 0x0007; + result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + 0x21, 0xa1, + 0x0000, 0x0000, buf, len, + HZ * USB_CTRL_GET_TIMEOUT); + debug_data(dev, __func__, len, buf, result); + + /* send 6 cmd */ + /* + * 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 34.1.0 + * 16.0 DO 80 25 00 00 00 00 08 + */ + len = 0x0007; + buf[0] = 0x80; + buf[1] = 0x25; + buf[2] = 0x00; + buf[3] = 0x00; + buf[4] = 0x00; + buf[5] = 0x00; + buf[6] = 0x08; + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x20, 0x21, + 0x0000, 0x0000, buf, len, + HZ * USB_CTRL_GET_TIMEOUT); + debug_data(dev, __func__, len, buf, result); + kfree(buf); + + return usb_serial_generic_open(tty, port); +} + +/* + * CTL 21 22 02 00 00 00 00 00 CLASS 338.1.0 + * + * 16.1 DI a1 20 00 00 00 00 02 00 02 00 . ........ 340.1.0 + * 16.0 CTL 21 22 03 00 00 00 00 00 CLASS 341.1.0 + * + * 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 346.1.0(3) + * 16.0 DI 00 08 07 00 00 00 08 ....... 346.2.0 + * + * 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 349.1.0 + * 16.0 DO 00 c2 01 00 00 00 08 ....... 349.2.0 + * + * 16.0 CTL 21 22 03 00 00 00 00 00 CLASS 350.1.0(2) + * + * 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 352.1.0 + * 16.0 DI 00 c2 01 00 00 00 08 ....... 352.2.0 + * + * 16.1 DI a1 20 00 00 00 00 02 00 02 00 . ........ 353.1.0 + * + * 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 354.1.0 + * 16.0 DO 00 c2 01 00 00 00 08 ....... 354.2.0 + * + * 16.0 CTL 21 22 03 00 00 00 00 00 +*/ + +static void zte_ev_usb_serial_close(struct usb_serial_port *port) +{ + struct usb_device *udev = port->serial->dev; + struct device *dev = &port->dev; + int result = 0; + int len; + unsigned char *buf; + + if (port->number != 0) + return; + + buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL); + if (!buf) + return; + + /* send 1st ctl cmd(CTL 21 22 02 00 00 00 00 00) */ + len = 0; + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x22, 0x21, + 0x0002, 0x0000, NULL, len, + HZ * USB_CTRL_GET_TIMEOUT); + dev_dbg(dev, "result = %d\n", result); + + /* send 2st ctl cmd(CTL 21 22 03 00 00 00 00 00 ) */ + len = 0; + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x22, 0x21, + 0x0003, 0x0000, NULL, len, + HZ * USB_CTRL_GET_TIMEOUT); + dev_dbg(dev, "result = %d\n", result); + + /* send 3st cmd and recieve data */ + /* + * 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 25.1.0(5) + * 16.0 DI 00 08 07 00 00 00 08 + */ + len = 0x0007; + result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + 0x21, 0xa1, + 0x0000, 0x0000, buf, len, + HZ * USB_CTRL_GET_TIMEOUT); + debug_data(dev, __func__, len, buf, result); + + /* send 4 cmd */ + /* + * 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 30.1.0 + * 16.0 DO 00 c2 01 00 00 00 08 .%..... 30.2.0 + */ + len = 0x0007; + buf[0] = 0x00; + buf[1] = 0xc2; + buf[2] = 0x01; + buf[3] = 0x00; + buf[4] = 0x00; + buf[5] = 0x00; + buf[6] = 0x08; + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x20, 0x21, + 0x0000, 0x0000, buf, len, + HZ * USB_CTRL_GET_TIMEOUT); + debug_data(dev, __func__, len, buf, result); + + /* send 5 cmd */ + /* + * 16.0 CTL 21 22 03 00 00 00 00 00 + */ + len = 0; + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x22, 0x21, + 0x0003, 0x0000, NULL, len, + HZ * USB_CTRL_GET_TIMEOUT); + dev_dbg(dev, "result = %d\n", result); + + /* send 6 cmd */ + /* + * 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 33.1.0 + * 16.0 DI 00 c2 01 00 00 00 08 + */ + len = 0x0007; + result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + 0x21, 0xa1, + 0x0000, 0x0000, buf, len, + HZ * USB_CTRL_GET_TIMEOUT); + debug_data(dev, __func__, len, buf, result); + + /* send 7 cmd */ + /* + * 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 354.1.0 + * 16.0 DO 00 c2 01 00 00 00 08 ....... 354.2.0 + */ + len = 0x0007; + buf[0] = 0x00; + buf[1] = 0xc2; + buf[2] = 0x01; + buf[3] = 0x00; + buf[4] = 0x00; + buf[5] = 0x00; + buf[6] = 0x08; + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x20, 0x21, + 0x0000, 0x0000, buf, len, + HZ * USB_CTRL_GET_TIMEOUT); + debug_data(dev, __func__, len, buf, result); + + /* send 8 cmd */ + /* + * 16.0 CTL 21 22 03 00 00 00 00 00 + */ + len = 0; + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x22, 0x21, + 0x0003, 0x0000, NULL, len, + HZ * USB_CTRL_GET_TIMEOUT); + dev_dbg(dev, "result = %d\n", result); + + kfree(buf); + + usb_serial_generic_close(port); +} + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(0x19d2, 0xffff) }, /* AC8700 */ + { USB_DEVICE(0x19d2, 0xfffe) }, + { USB_DEVICE(0x19d2, 0xfffd) }, /* MG880 */ + { USB_DEVICE(0x05C6, 0x3197) }, + { USB_DEVICE(0x05C6, 0x6000) }, + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +static struct usb_serial_driver zio_device = { + .driver = { + .owner = THIS_MODULE, + .name = "zte_ev", + }, + .id_table = id_table, + .num_ports = 1, + .open = zte_ev_usb_serial_open, + .close = zte_ev_usb_serial_close, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &zio_device, NULL +}; + +module_usb_serial_driver(serial_drivers, id_table); +MODULE_LICENSE("GPL v2"); |