diff options
| -rw-r--r-- | drivers/net/wireless/libertas/cfg.c | 45 | ||||
| -rw-r--r-- | drivers/net/wireless/libertas/cmd.c | 245 | ||||
| -rw-r--r-- | drivers/net/wireless/libertas/cmdresp.c | 19 | ||||
| -rw-r--r-- | drivers/net/wireless/libertas/debugfs.c | 36 | ||||
| -rw-r--r-- | drivers/net/wireless/libertas/decl.h | 8 | ||||
| -rw-r--r-- | drivers/net/wireless/libertas/defs.h | 113 | ||||
| -rw-r--r-- | drivers/net/wireless/libertas/dev.h | 20 | ||||
| -rw-r--r-- | drivers/net/wireless/libertas/ethtool.c | 3 | ||||
| -rw-r--r-- | drivers/net/wireless/libertas/host.h | 33 | ||||
| -rw-r--r-- | drivers/net/wireless/libertas/if_cs.c | 35 | ||||
| -rw-r--r-- | drivers/net/wireless/libertas/if_spi.c | 134 | ||||
| -rw-r--r-- | drivers/net/wireless/libertas/if_spi.h | 68 | ||||
| -rw-r--r-- | drivers/net/wireless/libertas/if_usb.c | 113 | ||||
| -rw-r--r-- | drivers/net/wireless/libertas/if_usb.h | 14 | ||||
| -rw-r--r-- | drivers/net/wireless/libertas/main.c | 99 | ||||
| -rw-r--r-- | drivers/net/wireless/libertas/mesh.c | 210 | ||||
| -rw-r--r-- | drivers/net/wireless/libertas/mesh.h | 6 | ||||
| -rw-r--r-- | drivers/net/wireless/libertas/rx.c | 34 | ||||
| -rw-r--r-- | drivers/net/wireless/libertas/tx.c | 34 | ||||
| -rw-r--r-- | drivers/net/wireless/libertas/types.h | 18 |
20 files changed, 730 insertions, 557 deletions
diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c index 30ef0351bfc..f582dfd2927 100644 --- a/drivers/net/wireless/libertas/cfg.c +++ b/drivers/net/wireless/libertas/cfg.c @@ -122,8 +122,10 @@ static u8 lbs_auth_to_authtype(enum nl80211_auth_type auth_type) } -/* Various firmware commands need the list of supported rates, but with - the hight-bit set for basic rates */ +/* + * Various firmware commands need the list of supported rates, but with + * the hight-bit set for basic rates + */ static int lbs_add_rates(u8 *rates) { size_t i; @@ -425,7 +427,7 @@ static int lbs_add_wpa_tlv(u8 *tlv, const u8 *ie, u8 ie_len) return ie_len + 2; } -/*************************************************************************** +/* * Set Channel */ @@ -452,7 +454,7 @@ static int lbs_cfg_set_channel(struct wiphy *wiphy, -/*************************************************************************** +/* * Scanning */ @@ -538,8 +540,10 @@ static int lbs_ret_scan(struct lbs_private *priv, unsigned long dummy, goto done; } - /* Validity check: the TLV holds TSF values with 8 bytes each, so - * the size in the TLV must match the nr_sets value */ + /* + * Validity check: the TLV holds TSF values with 8 bytes each, so + * the size in the TLV must match the nr_sets value + */ i = get_unaligned_le16(tsfdesc); tsfdesc += 2; if (i / 8 != scanresp->nr_sets) { @@ -581,8 +585,10 @@ static int lbs_ret_scan(struct lbs_private *priv, unsigned long dummy, /* To find out the channel, we must parse the IEs */ ie = pos; - /* 6+1+8+2+2: size of BSSID, RSSI, time stamp, beacon - interval, capabilities */ + /* + * 6+1+8+2+2: size of BSSID, RSSI, time stamp, beacon + * interval, capabilities + */ ielen = left = len - (6 + 1 + 8 + 2 + 2); while (left >= 2) { u8 id, elen; @@ -790,7 +796,7 @@ static int lbs_cfg_scan(struct wiphy *wiphy, -/*************************************************************************** +/* * Events */ @@ -825,7 +831,7 @@ void lbs_send_mic_failureevent(struct lbs_private *priv, u32 event) -/*************************************************************************** +/* * Connect/disconnect */ @@ -950,8 +956,10 @@ static int lbs_enable_rsn(struct lbs_private *priv, int enable) * Set WPA/WPA key material */ -/* like "struct cmd_ds_802_11_key_material", but with cmd_header. Once we - * get rid of WEXT, this should go into host.h */ +/* + * like "struct cmd_ds_802_11_key_material", but with cmd_header. Once we + * get rid of WEXT, this should go into host.h + */ struct cmd_key_material { struct cmd_header hdr; @@ -1536,7 +1544,7 @@ static int lbs_cfg_del_key(struct wiphy *wiphy, struct net_device *netdev, } -/*************************************************************************** +/* * Get station */ @@ -1581,7 +1589,7 @@ static int lbs_cfg_get_station(struct wiphy *wiphy, struct net_device *dev, -/*************************************************************************** +/* * "Site survey", here just current channel and noise level */ @@ -1614,7 +1622,7 @@ static int lbs_get_survey(struct wiphy *wiphy, struct net_device *dev, -/*************************************************************************** +/* * Change interface */ @@ -1656,11 +1664,12 @@ static int lbs_change_intf(struct wiphy *wiphy, struct net_device *dev, -/*************************************************************************** +/* * IBSS (Ad-Hoc) */ -/* The firmware needs the following bits masked out of the beacon-derived +/* + * The firmware needs the following bits masked out of the beacon-derived * capability field when associating/joining to a BSS: * 9 (QoS), 11 (APSD), 12 (unused), 14 (unused), 15 (unused) */ @@ -1999,7 +2008,7 @@ static int lbs_leave_ibss(struct wiphy *wiphy, struct net_device *dev) -/*************************************************************************** +/* * Initialization */ diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c index 7e8a658b767..6a96fc9c1ce 100644 --- a/drivers/net/wireless/libertas/cmd.c +++ b/drivers/net/wireless/libertas/cmd.c @@ -1,7 +1,7 @@ -/** - * This file contains the handling of command. - * It prepares command and sends it to firmware when it is ready. - */ +/* + * This file contains the handling of command. + * It prepares command and sends it to firmware when it is ready. + */ #include <linux/kfifo.h> #include <linux/sched.h> @@ -16,14 +16,14 @@ #define CAL_RSSI(snr, nf) ((s32)((s32)(snr) + CAL_NF(nf))) /** - * @brief Simple callback that copies response back into command + * lbs_cmd_copyback - Simple callback that copies response back into command * - * @param priv A pointer to struct lbs_private structure - * @param extra A pointer to the original command structure for which - * 'resp' is a response - * @param resp A pointer to the command response + * @priv: A pointer to &struct lbs_private structure + * @extra: A pointer to the original command structure for which + * 'resp' is a response + * @resp: A pointer to the command response * - * @return 0 on success, error on failure + * returns: 0 on success, error on failure */ int lbs_cmd_copyback(struct lbs_private *priv, unsigned long extra, struct cmd_header *resp) @@ -38,15 +38,15 @@ int lbs_cmd_copyback(struct lbs_private *priv, unsigned long extra, EXPORT_SYMBOL_GPL(lbs_cmd_copyback); /** - * @brief Simple callback that ignores the result. Use this if - * you just want to send a command to the hardware, but don't + * lbs_cmd_async_callback - Simple callback that ignores the result. + * Use this if you just want to send a command to the hardware, but don't * care for the result. * - * @param priv ignored - * @param extra ignored - * @param resp ignored + * @priv: ignored + * @extra: ignored + * @resp: ignored * - * @return 0 for success + * returns: 0 for success */ static int lbs_cmd_async_callback(struct lbs_private *priv, unsigned long extra, struct cmd_header *resp) @@ -56,10 +56,11 @@ static int lbs_cmd_async_callback(struct lbs_private *priv, unsigned long extra, /** - * @brief Checks whether a command is allowed in Power Save mode + * is_command_allowed_in_ps - tests if a command is allowed in Power Save mode + * + * @cmd: the command ID * - * @param command the command ID - * @return 1 if allowed, 0 if not allowed + * returns: 1 if allowed, 0 if not allowed */ static u8 is_command_allowed_in_ps(u16 cmd) { @@ -75,11 +76,12 @@ static u8 is_command_allowed_in_ps(u16 cmd) } /** - * @brief Updates the hardware details like MAC address and regulatory region + * lbs_update_hw_spec - Updates the hardware details like MAC address + * and regulatory region * - * @param priv A pointer to struct lbs_private structure + * @priv: A pointer to &struct lbs_private structure * - * @return 0 on success, error on failure + * returns: 0 on success, error on failure */ int lbs_update_hw_spec(struct lbs_private *priv) { @@ -217,14 +219,14 @@ int lbs_host_sleep_cfg(struct lbs_private *priv, uint32_t criteria, EXPORT_SYMBOL_GPL(lbs_host_sleep_cfg); /** - * @brief Sets the Power Save mode + * lbs_set_ps_mode - Sets the Power Save mode * - * @param priv A pointer to struct lbs_private structure - * @param cmd_action The Power Save operation (PS_MODE_ACTION_ENTER_PS or + * @priv: A pointer to &struct lbs_private structure + * @cmd_action: The Power Save operation (PS_MODE_ACTION_ENTER_PS or * PS_MODE_ACTION_EXIT_PS) - * @param block Whether to block on a response or not + * @block: Whether to block on a response or not * - * @return 0 on success, error on failure + * returns: 0 on success, error on failure */ int lbs_set_ps_mode(struct lbs_private *priv, u16 cmd_action, bool block) { @@ -417,13 +419,13 @@ int lbs_set_host_sleep(struct lbs_private *priv, int host_sleep) } /** - * @brief Set an SNMP MIB value + * lbs_set_snmp_mib - Set an SNMP MIB value * - * @param priv A pointer to struct lbs_private structure - * @param oid The OID to set in the firmware - * @param val Value to set the OID to + * @priv: A pointer to &struct lbs_private structure + * @oid: The OID to set in the firmware + * @val: Value to set the OID to * - * @return 0 on success, error on failure + * returns: 0 on success, error on failure */ int lbs_set_snmp_mib(struct lbs_private *priv, u32 oid, u16 val) { @@ -467,13 +469,13 @@ out: } /** - * @brief Get an SNMP MIB value + * lbs_get_snmp_mib - Get an SNMP MIB value * - * @param priv A pointer to struct lbs_private structure - * @param oid The OID to retrieve from the firmware - * @param out_val Location for the returned value + * @priv: A pointer to &struct lbs_private structure + * @oid: The OID to retrieve from the firmware + * @out_val: Location for the returned value * - * @return 0 on success, error on failure + * returns: 0 on success, error on failure */ int lbs_get_snmp_mib(struct lbs_private *priv, u32 oid, u16 *out_val) { @@ -510,14 +512,14 @@ out: } /** - * @brief Get the min, max, and current TX power + * lbs_get_tx_power - Get the min, max, and current TX power * - * @param priv A pointer to struct lbs_private structure - * @param curlevel Current power level in dBm - * @param minlevel Minimum supported power level in dBm (optional) - * @param maxlevel Maximum supported power level in dBm (optional) + * @priv: A pointer to &struct lbs_private structure + * @curlevel: Current power level in dBm + * @minlevel: Minimum supported power level in dBm (optional) + * @maxlevel: Maximum supported power level in dBm (optional) * - * @return 0 on success, error on failure + * returns: 0 on success, error on failure */ int lbs_get_tx_power(struct lbs_private *priv, s16 *curlevel, s16 *minlevel, s16 *maxlevel) @@ -545,12 +547,12 @@ int lbs_get_tx_power(struct lbs_private *priv, s16 *curlevel, s16 *minlevel, } /** - * @brief Set the TX power + * lbs_set_tx_power - Set the TX power * - * @param priv A pointer to struct lbs_private structure - * @param dbm The desired power level in dBm + * @priv: A pointer to &struct lbs_private structure + * @dbm: The desired power level in dBm * - * @return 0 on success, error on failure + * returns: 0 on success, error on failure */ int lbs_set_tx_power(struct lbs_private *priv, s16 dbm) { @@ -573,12 +575,13 @@ int lbs_set_tx_power(struct lbs_private *priv, s16 dbm) } /** - * @brief Enable or disable monitor mode (only implemented on OLPC usb8388 FW) + * lbs_set_monitor_mode - Enable or disable monitor mode + * (only implemented on OLPC usb8388 FW) * - * @param priv A pointer to struct lbs_private structure - * @param enable 1 to enable monitor mode, 0 to disable + * @priv: A pointer to &struct lbs_private structure + * @enable: 1 to enable monitor mode, 0 to disable * - * @return 0 on success, error on failure + * returns: 0 on success, error on failure */ int lbs_set_monitor_mode(struct lbs_private *priv, int enable) { @@ -604,11 +607,11 @@ int lbs_set_monitor_mode(struct lbs_private *priv, int enable) } /** - * @brief Get the radio channel + * lbs_get_channel - Get the radio channel * - * @param priv A pointer to struct lbs_private structure + * @priv: A pointer to &struct lbs_private structure * - * @return The channel on success, error on failure + * returns: The channel on success, error on failure */ static int lbs_get_channel(struct lbs_private *priv) { @@ -650,12 +653,12 @@ int lbs_update_channel(struct lbs_private *priv) } /** - * @brief Set the radio channel + * lbs_set_channel - Set the radio channel * - * @param priv A pointer to struct lbs_private structure - * @param channel The desired channel, or 0 to clear a locked channel + * @priv: A pointer to &struct lbs_private structure + * @channel: The desired channel, or 0 to clear a locked channel * - * @return 0 on success, error on failure + * returns: 0 on success, error on failure */ int lbs_set_channel(struct lbs_private *priv, u8 channel) { @@ -686,12 +689,13 @@ out: } /** - * @brief Get current RSSI and noise floor + * lbs_get_rssi - Get current RSSI and noise floor * - * @param priv A pointer to struct lbs_private structure - * @param rssi On successful return, signal level in mBm + * @priv: A pointer to &struct lbs_private structure + * @rssi: On successful return, signal level in mBm + * @nf: On successful return, Noise floor * - * @return The channel on success, error on failure + * returns: The channel on success, error on failure */ int lbs_get_rssi(struct lbs_private *priv, s8 *rssi, s8 *nf) { @@ -719,13 +723,14 @@ int lbs_get_rssi(struct lbs_private *priv, s8 *rssi, s8 *nf) } /** - * @brief Send regulatory and 802.11d domain information to the firmware + * lbs_set_11d_domain_info - Send regulatory and 802.11d domain information + * to the firmware * - * @param priv pointer to struct lbs_private - * @param request cfg80211 regulatory request structure - * @param bands the device's supported bands and channels + * @priv: pointer to &struct lbs_private + * @request: cfg80211 regulatory request structure + * @bands: the device's supported bands and channels * - * @return 0 on success, error code on failure + * returns: 0 on success, error code on failure */ int lbs_set_11d_domain_info(struct lbs_private *priv, struct regulatory_request *request, @@ -842,15 +847,15 @@ int lbs_set_11d_domain_info(struct lbs_private *priv, } /** - * @brief Read a MAC, Baseband, or RF register + * lbs_get_reg - Read a MAC, Baseband, or RF register * - * @param priv pointer to struct lbs_private - * @param cmd register command, one of CMD_MAC_REG_ACCESS, - * CMD_BBP_REG_ACCESS, or CMD_RF_REG_ACCESS - * @param offset byte offset of the register to get - * @param value on success, the value of the register at 'offset' + * @priv: pointer to &struct lbs_private + * @reg: register command, one of CMD_MAC_REG_ACCESS, + * CMD_BBP_REG_ACCESS, or CMD_RF_REG_ACCESS + * @offset: byte offset of the register to get + * @value: on success, the value of the register at 'offset' * - * @return 0 on success, error code on failure + * returns: 0 on success, error code on failure */ int lbs_get_reg(struct lbs_private *priv, u16 reg, u16 offset, u32 *value) { @@ -886,15 +891,15 @@ out: } /** - * @brief Write a MAC, Baseband, or RF register + * lbs_set_reg - Write a MAC, Baseband, or RF register * - * @param priv pointer to struct lbs_private - * @param cmd register command, one of CMD_MAC_REG_ACCESS, - * CMD_BBP_REG_ACCESS, or CMD_RF_REG_ACCESS - * @param offset byte offset of the register to set - * @param value the value to write to the register at 'offset' + * @priv: pointer to &struct lbs_private + * @reg: register command, one of CMD_MAC_REG_ACCESS, + * CMD_BBP_REG_ACCESS, or CMD_RF_REG_ACCESS + * @offset: byte offset of the register to set + * @value: the value to write to the register at 'offset' * - * @return 0 on success, error code on failure + * returns: 0 on success, error code on failure */ int lbs_set_reg(struct lbs_private *priv, u16 reg, u16 offset, u32 value) { @@ -1023,7 +1028,7 @@ static void lbs_submit_command(struct lbs_private *priv, lbs_deb_leave(LBS_DEB_HOST); } -/** +/* * This function inserts command node to cmdfreeq * after cleans it. Requires priv->driver_lock held. */ @@ -1125,11 +1130,12 @@ void lbs_set_mac_control(struct lbs_private *priv) } /** - * @brief This function allocates the command buffer and link - * it to command free queue. + * lbs_allocate_cmd_buffer - allocates the command buffer and links + * it to command free queue + * + * @priv: A pointer to &struct lbs_private structure * - * @param priv A pointer to struct lbs_private structure - * @return 0 or -1 + * returns: 0 for success or -1 on error */ int lbs_allocate_cmd_buffer(struct lbs_private *priv) { @@ -1171,10 +1177,11 @@ done: } /** - * @brief This function frees the command buffer. + * lbs_free_cmd_buffer - free the command buffer * - * @param priv A pointer to struct lbs_private structure - * @return 0 or -1 + * @priv: A pointer to &struct lbs_private structure + * + * returns: 0 for success */ int lbs_free_cmd_buffer(struct lbs_private *priv) { @@ -1211,11 +1218,13 @@ done: } /** - * @brief This function gets a free command node if available in - * command free queue. + * lbs_get_free_cmd_node - gets a free command node if available in + * command free queue + * + * @priv: A pointer to &struct lbs_private structure * - * @param priv A pointer to struct lbs_private structure - * @return cmd_ctrl_node A pointer to cmd_ctrl_node structure or NULL + * returns: A pointer to &cmd_ctrl_node structure on success + * or %NULL on error */ static struct cmd_ctrl_node *lbs_get_free_cmd_node(struct lbs_private *priv) { @@ -1245,12 +1254,12 @@ static struct cmd_ctrl_node *lbs_get_free_cmd_node(struct lbs_private *priv) } /** - * @brief This function executes next command in command - * pending queue. It will put firmware back to PS mode - * if applicable. + * lbs_execute_next_command - execute next command in command + * pending queue. Will put firmware back to PS mode if applicable. * - * @param priv A pointer to struct lbs_private structure - * @return 0 or -1 + * @priv: A pointer to &struct lbs_private structure + * + * returns: 0 on success or -1 on error */ int lbs_execute_next_command(struct lbs_private *priv) { @@ -1454,12 +1463,12 @@ out: } /** - * @brief This function checks condition and prepares to - * send sleep confirm command to firmware if ok. + * lbs_ps_confirm_sleep - checks condition and prepares to + * send sleep confirm command to firmware if ok + * + * @priv: A pointer to &struct lbs_private structure * - * @param priv A pointer to struct lbs_private structure - * @param psmode Power Saving mode - * @return n/a + * returns: n/a */ void lbs_ps_confirm_sleep(struct lbs_private *priv) { @@ -1499,16 +1508,16 @@ void lbs_ps_confirm_sleep(struct lbs_private *priv) /** - * @brief Configures the transmission power control functionality. + * lbs_set_tpc_cfg - Configures the transmission power control functionality * - * @param priv A pointer to struct lbs_private structure - * @param enable Transmission power control enable - * @param p0 Power level when link quality is good (dBm). - * @param p1 Power level when link quality is fair (dBm). - * @param p2 Power level when link quality is poor (dBm). - * @param usesnr Use Signal to Noise Ratio in TPC + * @priv: A pointer to &struct lbs_private structure + * @enable: Transmission power control enable + * @p0: Power level when link quality is good (dBm). + * @p1: Power level when link quality is fair (dBm). + * @p2: Power level when link quality is poor (dBm). + * @usesnr: Use Signal to Noise Ratio in TPC * - * @return 0 on success + * returns: 0 on success */ int lbs_set_tpc_cfg(struct lbs_private *priv, int enable, int8_t p0, int8_t p1, int8_t p2, int usesnr) @@ -1531,15 +1540,15 @@ int lbs_set_tpc_cfg(struct lbs_private *priv, int enable, int8_t p0, int8_t p1, } /** - * @brief Configures the power adaptation settings. + * lbs_set_power_adapt_cfg - Configures the power adaptation settings * - * @param priv A pointer to struct lbs_private structure - * @param enable Power adaptation enable - * @param p0 Power level for 1, 2, 5.5 and 11 Mbps (dBm). - * @param p1 Power level for 6, 9, 12, 18, 22, 24 and 36 Mbps (dBm). - * @param p2 Power level for 48 and 54 Mbps (dBm). + * @priv: A pointer to &struct lbs_private structure + * @enable: Power adaptation enable + * @p0: Power level for 1, 2, 5.5 and 11 Mbps (dBm). + * @p1: Power level for 6, 9, 12, 18, 22, 24 and 36 Mbps (dBm). + * @p2: Power level for 48 and 54 Mbps (dBm). * - * @return 0 on Success + * returns: 0 on Success */ int lbs_set_power_adapt_cfg(struct lbs_private *priv, int enable, int8_t p0, diff --git a/drivers/net/wireless/libertas/cmdresp.c b/drivers/net/wireless/libertas/cmdresp.c index 5e95da9dcc2..03e528994a9 100644 --- a/drivers/net/wireless/libertas/cmdresp.c +++ b/drivers/net/wireless/libertas/cmdresp.c @@ -1,7 +1,7 @@ -/** - * This file contains the handling of command - * responses as well as events generated by firmware. - */ +/* + * This file contains the handling of command + * responses as well as events generated by firmware. + */ #include <linux/slab.h> #include <linux/delay.h> #include <linux/sched.h> @@ -12,12 +12,13 @@ #include "cmd.h" /** - * @brief This function handles disconnect event. it - * reports disconnect to upper layer, clean tx/rx packets, - * reset link state etc. + * lbs_mac_event_disconnected - handles disconnect event. It + * reports disconnect to upper layer, clean tx/rx packets, + * reset link state etc. + * + * @priv: A pointer to struct lbs_private structure * - * @param priv A pointer to struct lbs_private structure - * @return n/a + * returns: n/a */ void lbs_mac_event_disconnected(struct lbs_private *priv) { diff --git a/drivers/net/wireless/libertas/debugfs.c b/drivers/net/wireless/libertas/debugfs.c index fbf3b0332bb..851fe7bd4ba 100644 --- a/drivers/net/wireless/libertas/debugfs.c +++ b/drivers/net/wireless/libertas/debugfs.c @@ -849,15 +849,14 @@ static struct debug_data items[] = { static int num_of_items = ARRAY_SIZE(items); /** - * @brief proc read function + * lbs_debugfs_read - proc read function * - * @param page pointer to buffer - * @param s read data starting position - * @param off offset - * @param cnt counter - * @param eof end of file flag - * @param data data to output - * @return number of output data + * @file: file to read + * @userbuf: pointer to buffer + * @count: number of bytes to read + * @ppos: read data starting position + * + * returns: amount of data read or negative error code */ static ssize_t lbs_debugfs_read(struct file *file, char __user *userbuf, size_t count, loff_t *ppos) @@ -897,13 +896,14 @@ static ssize_t lbs_debugfs_read(struct file *file, char __user *userbuf, } /** - * @brief proc write function + * lbs_debugfs_write - proc write function + * + * @f: file pointer + * @buf: pointer to data buffer + * @cnt: data number to write + * @ppos: file position * - * @param f file pointer - * @param buf pointer to data buffer - * @param cnt data number to write - * @param data data to write - * @return number of data + * returns: amount of data written */ static ssize_t lbs_debugfs_write(struct file *f, const char __user *buf, size_t cnt, loff_t *ppos) @@ -966,11 +966,11 @@ static const struct file_operations lbs_debug_fops = { }; /** - * @brief create debug proc file + * lbs_debug_init - create debug proc file + * + * @priv: pointer to &struct lbs_private * - * @param priv pointer struct lbs_private - * @param dev pointer net_device - * @return N/A + * returns: N/A */ static void lbs_debug_init(struct lbs_private *priv) { diff --git a/drivers/net/wireless/libertas/decl.h b/drivers/net/wireless/libertas/decl.h index 2ae752d1006..da0b05bb89f 100644 --- a/drivers/net/wireless/libertas/decl.h +++ b/drivers/net/wireless/libertas/decl.h @@ -1,8 +1,8 @@ -/** - * This file contains declaration referring to - * functions defined in other source files - */ +/* + * This file contains declaration referring to + * functions defined in other source files + */ #ifndef _LBS_DECL_H_ #define _LBS_DECL_H_ diff --git a/drivers/net/wireless/libertas/defs.h b/drivers/net/wireless/libertas/defs.h index d00c728cec4..92b5b1f8fd7 100644 --- a/drivers/net/wireless/libertas/defs.h +++ b/drivers/net/wireless/libertas/defs.h @@ -1,7 +1,7 @@ -/** - * This header file contains global constant/enum definitions, - * global variable declaration. - */ +/* + * This header file contains global constant/enum definitions, + * global variable declaration. + */ #ifndef _LBS_DEFS_H_ #define _LBS_DEFS_H_ @@ -123,19 +123,19 @@ static inline void lbs_deb_hex(unsigned int grp, const char *prompt, u8 *buf, in -/** Buffer Constants */ +/* Buffer Constants */ /* The size of SQ memory PPA, DPA are 8 DWORDs, that keep the physical -* addresses of TxPD buffers. Station has only 8 TxPD available, Whereas -* driver has more local TxPDs. Each TxPD on the host memory is associated -* with a Tx control node. The driver maintains 8 RxPD descriptors for -* station firmware to store Rx packet information. -* -* Current version of MAC has a 32x6 multicast address buffer. -* -* 802.11b can have up to 14 channels, the driver keeps the -* BSSID(MAC address) of each APs or Ad hoc stations it has sensed. -*/ + * addresses of TxPD buffers. Station has only 8 TxPD available, Whereas + * driver has more local TxPDs. Each TxPD on the host memory is associated + * with a Tx control node. The driver maintains 8 RxPD descriptors for + * station firmware to store Rx packet information. + * + * Current version of MAC has a 32x6 multicast address buffer. + * + * 802.11b can have up to 14 channels, the driver keeps the + * BSSID(MAC address) of each APs or Ad hoc stations it has sensed. + */ #define MRVDRV_MAX_MULTICAST_LIST_SIZE 32 #define LBS_NUM_CMD_BUFFERS 10 @@ -166,7 +166,7 @@ static inline void lbs_deb_hex(unsigned int grp, const char *prompt, u8 *buf, in #define WOL_RESULT_NOSPC_ERR 1 #define WOL_RESULT_EEXIST_ERR 2 -/** Misc constants */ +/* Misc constants */ /* This section defines 802.11 specific contants */ #define MRVDRV_MAX_BSS_DESCRIPTS 16 @@ -183,7 +183,8 @@ static inline void lbs_deb_hex(unsigned int grp, const char *prompt, u8 *buf, in #define MARVELL_MESH_IE_LENGTH 9 -/* Values used to populate the struct mrvl_mesh_ie. The only time you need this +/* + * Values used to populate the struct mrvl_mesh_ie. The only time you need this * is when enabling the mesh using CMD_MESH_CONFIG. */ #define MARVELL_MESH_IE_TYPE 4 @@ -193,7 +194,7 @@ static inline void lbs_deb_hex(unsigned int grp, const char *prompt, u8 *buf, in #define MARVELL_MESH_METRIC_ID 0 #define MARVELL_MESH_CAPABILITY 0 -/** INT status Bit Definition*/ +/* INT status Bit Definition */ #define MRVDRV_TX_DNLD_RDY 0x0001 #define MRVDRV_RX_UPLD_RDY 0x0002 #define MRVDRV_CMD_DNLD_RDY 0x0004 @@ -208,59 +209,63 @@ static inline void lbs_deb_hex(unsigned int grp, const char *prompt, u8 *buf, in #define TPC_DEFAULT_P1 10 #define TPC_DEFAULT_P2 13 -/** TxPD status */ +/* TxPD status */ -/* Station firmware use TxPD status field to report final Tx transmit -* result, Bit masks are used to present combined situations. -*/ +/* + * Station firmware use TxPD status field to report final Tx transmit + * result, Bit masks are used to present combined situations. + */ #define MRVDRV_TxPD_POWER_MGMT_NULL_PACKET 0x01 #define MRVDRV_TxPD_POWER_MGMT_LAST_PACKET 0x08 -/** Tx mesh flag */ -/* Currently we are using normal WDS flag as mesh flag. +/* Tx mesh flag */ +/* + * Currently we are using normal WDS flag as mesh flag. * TODO: change to proper mesh flag when MAC understands it. */ #define TxPD_CONTROL_WDS_FRAME (1<<17) #define TxPD_MESH_FRAME TxPD_CONTROL_WDS_FRAME -/** Mesh interface ID */ +/* Mesh interface ID */ #define MESH_IFACE_ID 0x0001 -/** Mesh id should be in bits 14-13-12 */ +/* Mesh id should be in bits 14-13-12 */ #define MESH_IFACE_BIT_OFFSET 0x000c -/** Mesh enable bit in FW capability */ +/* Mesh enable bit in FW capability */ #define MESH_CAPINFO_ENABLE_MASK (1<<16) -/** FW definition from Marvell v4 */ +/* FW definition from Marvell v4 */ #define MRVL_FW_V4 (0x04) -/** FW definition from Marvell v5 */ +/* FW definition from Marvell v5 */ #define MRVL_FW_V5 (0x05) -/** FW definition from Marvell v10 */ +/* FW definition from Marvell v10 */ #define MRVL_FW_V10 (0x0a) -/** FW major revision definition */ +/* FW major revision definition */ #define MRVL_FW_MAJOR_REV(x) ((x)>>24) -/** RxPD status */ +/* RxPD status */ #define MRVDRV_RXPD_STATUS_OK 0x0001 -/** RxPD status - Received packet types */ -/** Rx mesh flag */ -/* Currently we are using normal WDS flag as mesh flag. +/* RxPD status - Received packet types */ +/* Rx mesh flag */ +/* + * Currently we are using normal WDS flag as mesh flag. * TODO: change to proper mesh flag when MAC understands it. */ #define RxPD_CONTROL_WDS_FRAME (0x40) #define RxPD_MESH_FRAME RxPD_CONTROL_WDS_FRAME -/** RSSI-related defines */ -/* RSSI constants are used to implement 802.11 RSSI threshold -* indication. if the Rx packet signal got too weak for 5 consecutive -* times, miniport driver (driver) will report this event to wrapper -*/ +/* RSSI-related defines */ +/* + * RSSI constants are used to implement 802.11 RSSI threshold + * indication. if the Rx packet signal got too weak for 5 consecutive + * times, miniport driver (driver) will report this event to wrapper + */ #define MRVDRV_NF_DEFAULT_SCAN_VALUE (-96) -/** RTS/FRAG related defines */ +/* RTS/FRAG related defines */ #define MRVDRV_RTS_MIN_VALUE 0 #define MRVDRV_RTS_MAX_VALUE 2347 #define MRVDRV_FRAG_MIN_VALUE 256 @@ -300,36 +305,36 @@ static inline void lbs_deb_hex(unsigned int grp, const char *prompt, u8 *buf, in #define MAX_LEDS 8 -/** Global Variable Declaration */ +/* Global Variable Declaration */ extern const char lbs_driver_version[]; extern u16 lbs_region_code_to_index[MRVDRV_MAX_REGION_CODE]; -/** ENUM definition*/ -/** SNRNF_TYPE */ +/* ENUM definition */ +/* SNRNF_TYPE */ enum SNRNF_TYPE { TYPE_BEACON = 0, TYPE_RXPD, MAX_TYPE_B }; -/** SNRNF_DATA*/ +/* SNRNF_DATA */ enum SNRNF_DATA { TYPE_NOAVG = 0, TYPE_AVG, MAX_TYPE_AVG }; -/** LBS_802_11_POWER_MODE */ +/* LBS_802_11_POWER_MODE */ enum LBS_802_11_POWER_MODE { LBS802_11POWERMODECAM, LBS802_11POWERMODEMAX_PSP, LBS802_11POWERMODEFAST_PSP, - /*not a real mode, defined as an upper bound */ + /* not a real mode, defined as an upper bound */ LBS802_11POWEMODEMAX }; -/** PS_STATE */ +/* PS_STATE */ enum PS_STATE { PS_STATE_FULL_POWER, PS_STATE_AWAKE, @@ -337,7 +342,7 @@ enum PS_STATE { PS_STATE_SLEEP }; -/** DNLD_STATE */ +/* DNLD_STATE */ enum DNLD_STATE { DNLD_RES_RECEIVED, DNLD_DATA_SENT, @@ -345,19 +350,19 @@ enum DNLD_STATE { DNLD_BOOTCMD_SENT, }; -/** LBS_MEDIA_STATE */ +/* LBS_MEDIA_STATE */ enum LBS_MEDIA_STATE { LBS_CONNECTED, LBS_DISCONNECTED }; -/** LBS_802_11_PRIVACY_FILTER */ +/* LBS_802_11_PRIVACY_FILTER */ enum LBS_802_11_PRIVACY_FILTER { LBS802_11PRIVFILTERACCEPTALL, LBS802_11PRIVFILTER8021XWEP }; -/** mv_ms_type */ +/* mv_ms_type */ enum mv_ms_type { MVMS_DAT = 0, MVMS_CMD = 1, @@ -365,14 +370,14 @@ enum mv_ms_type { MVMS_EVENT }; -/** KEY_TYPE_ID */ +/* KEY_TYPE_ID */ enum KEY_TYPE_ID { KEY_TYPE_ID_WEP = 0, KEY_TYPE_ID_TKIP, KEY_TYPE_ID_AES }; -/** KEY_INFO_WPA (applies to both TKIP and AES/CCMP) */ +/* KEY_INFO_WPA (applies to both TKIP and AES/CCMP) */ enum KEY_INFO_WPA { KEY_INFO_WPA_MCAST = 0x01, KEY_INFO_WPA_UNICAST = 0x02, diff --git a/drivers/net/wireless/libertas/dev.h b/drivers/net/wireless/libertas/dev.h index bc461eb3966..76d018beebf 100644 --- a/drivers/net/wireless/libertas/dev.h +++ b/drivers/net/wireless/libertas/dev.h @@ -1,8 +1,8 @@ -/** - * This file contains definitions and data structures specific - * to Marvell 802.11 NIC. It contains the Device Information - * structure struct lbs_private.. - */ +/* + * This file contains definitions and data structures specific + * to Marvell 802.11 NIC. It contains the Device Information + * structure struct lbs_private.. + */ #ifndef _LBS_DEV_H_ #define _LBS_DEV_H_ @@ -12,7 +12,7 @@ #include <linux/kfifo.h> -/** sleep_params */ +/* sleep_params */ struct sleep_params { uint16_t sp_error; uint16_t sp_offset; @@ -23,7 +23,7 @@ struct sleep_params { }; -/** Private structure for the MV device */ +/* Private structure for the MV device */ struct lbs_private { /* Basic networking */ @@ -125,12 +125,12 @@ struct lbs_private { /* Events sent from hardware to driver */ struct kfifo event_fifo; - /** thread to service interrupts */ + /* thread to service interrupts */ struct task_struct *main_thread; wait_queue_head_t waitq; struct workqueue_struct *work_thread; - /** Encryption stuff */ + /* Encryption stuff */ u8 authtype_auto; u8 wep_tx_key; u8 wep_key[4][WLAN_KEY_LEN_WEP104]; @@ -162,7 +162,7 @@ struct lbs_private { s16 txpower_min; s16 txpower_max; - /** Scanning */ + /* Scanning */ struct delayed_work scan_work; int scan_channel; /* Queue of things waiting for scan completion */ diff --git a/drivers/net/wireless/libertas/ethtool.c b/drivers/net/wireless/libertas/ethtool.c index 50193aac679..29dbce4a9f8 100644 --- a/drivers/net/wireless/libertas/ethtool.c +++ b/drivers/net/wireless/libertas/ethtool.c @@ -20,7 +20,8 @@ static void lbs_ethtool_get_drvinfo(struct net_device *dev, strcpy(info->version, lbs_driver_version); } -/* All 8388 parts have 16KiB EEPROM size at the time of writing. +/* + * All 8388 parts have 16KiB EEPROM size at the time of writing. * In case that changes this needs fixing. */ #define LBS_EEPROM_LEN 16384 diff --git a/drivers/net/wireless/libertas/host.h b/drivers/net/wireless/libertas/host.h index 6cb6935ee4a..2e2dbfa2ee5 100644 --- a/drivers/net/wireless/libertas/host.h +++ b/drivers/net/wireless/libertas/host.h @@ -1,7 +1,7 @@ -/** - * This file function prototypes, data structure - * and definitions for all the host/station commands - */ +/* + * This file function prototypes, data structure + * and definitions for all the host/station commands + */ #ifndef _LBS_HOST_H_ #define _LBS_HOST_H_ @@ -13,9 +13,10 @@ #define CMD_OPTION_WAITFORRSP 0x0002 -/** Host command IDs */ +/* Host command IDs */ -/* Return command are almost always the same as the host command, but with +/* + * Return command are almost always the same as the host command, but with * bit 15 set high. There are a few exceptions, though... */ #define CMD_RET(cmd) (0x8000 | cmd) @@ -251,7 +252,7 @@ enum cmd_mesh_config_types { CMD_TYPE_MESH_GET_MESH_IE, /* GET_DEFAULTS is superset of GET_MESHIE */ }; -/** Card Event definition */ +/* Card Event definition */ #define MACREG_INT_CODE_TX_PPA_FREE 0 #define MACREG_INT_CODE_TX_DMA_DONE 1 #define MACREG_INT_CODE_LINK_LOST_W_SCAN 2 @@ -624,12 +625,14 @@ struct cmd_ds_802_11_rf_channel { struct cmd_ds_802_11_rssi { struct cmd_header hdr; - /* request: number of beacons (N) to average the SNR and NF over + /* + * request: number of beacons (N) to average the SNR and NF over * response: SNR of most recent beacon */ __le16 n_or_snr; - /* The following fields are only set in the response. + /* + * The following fields are only set in the response. * In the request these are reserved and should be set to 0. */ __le16 nf; /* most recent beacon noise floor */ @@ -680,14 +683,16 @@ struct cmd_ds_802_11_ps_mode { __le16 action; - /* Interval for keepalive in PS mode: + /* + * Interval for keepalive in PS mode: * 0x0000 = don't change * 0x001E = firmware default * 0xFFFF = disable */ __le16 nullpktinterval; - /* Number of DTIM intervals to wake up for: + /* + * Number of DTIM intervals to wake up for: * 0 = don't change * 1 = firmware default * 5 = max @@ -697,7 +702,8 @@ struct cmd_ds_802_11_ps_mode { __le16 reserved; __le16 locallisteninterval; - /* AdHoc awake period (FW v9+ only): + /* + * AdHoc awake period (FW v9+ only): * 0 = don't change * 1 = always awake (IEEE standard behavior) * 2 - 31 = sleep for (n - 1) periods and awake for 1 period @@ -771,7 +777,8 @@ struct adhoc_bssdesc { __le16 capability; u8 rates[MAX_RATES]; - /* DO NOT ADD ANY FIELDS TO THIS STRUCTURE. It is used below in the + /* + * DO NOT ADD ANY FIELDS TO THIS STRUCTURE. It is used below in the * Adhoc join command and will cause a binary layout mismatch with * the firmware */ diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c index fc8121190d3..4dfd48fe8b6 100644 --- a/drivers/net/wireless/libertas/if_cs.c +++ b/drivers/net/wireless/libertas/if_cs.c @@ -312,7 +312,8 @@ static int if_cs_poll_while_fw_download(struct if_cs_card *card, uint addr, u8 r #define CF8385_MANFID 0x02df #define CF8385_CARDID 0x8103 -/* FIXME: just use the 'driver_info' field of 'struct pcmcia_device_id' when +/* + * FIXME: just use the 'driver_info' field of 'struct pcmcia_device_id' when * that gets fixed. Currently there's no way to access it from the probe hook. */ static inline u32 get_model(u16 manf_id, u16 card_id) @@ -621,8 +622,10 @@ static int if_cs_prog_helper(struct if_cs_card *card, const struct firmware *fw) if (remain < count) count = remain; - /* "write the number of bytes to be sent to the I/O Command - * write length register" */ + /* + * "write the number of bytes to be sent to the I/O Command + * write length register" + */ if_cs_write16(card, IF_CS_CMD_LEN, count); /* "write this to I/O Command port register as 16 bit writes */ @@ -631,16 +634,22 @@ static int if_cs_prog_helper(struct if_cs_card *card, const struct firmware *fw) &fw->data[sent], count >> 1); - /* "Assert the download over interrupt command in the Host - * status register" */ + /* + * "Assert the download over interrupt command in the Host + * status register" + */ if_cs_write8(card, IF_CS_HOST_STATUS, IF_CS_BIT_COMMAND); - /* "Assert the download over interrupt command in the Card - * interrupt case register" */ + /* + * "Assert the download over interrupt command in the Card + * interrupt case register" + */ if_cs_write16(card, IF_CS_HOST_INT_CAUSE, IF_CS_BIT_COMMAND); - /* "The host polls the Card Status register ... for 50 ms before - declaring a failure */ + /* + * "The host polls the Card Status register ... for 50 ms before + * declaring a failure" + */ ret = if_cs_poll_while_fw_download(card, IF_CS_CARD_STATUS, IF_CS_BIT_COMMAND); if (ret < 0) { @@ -841,7 +850,7 @@ static int if_cs_probe(struct pcmcia_device *p_dev) /* * Most of the libertas cards can do unaligned register access, but some - * weird ones can not. That's especially true for the CF8305 card. + * weird ones cannot. That's especially true for the CF8305 card. */ card->align_regs = 0; @@ -913,8 +922,10 @@ static int if_cs_probe(struct pcmcia_device *p_dev) goto out3; } - /* Clear any interrupt cause that happend while sending - * firmware/initializing card */ + /* + * Clear any interrupt cause that happened while sending + * firmware/initializing card + */ if_cs_write16(card, IF_CS_CARD_INT_CAUSE, IF_CS_BIT_MASK); if_cs_enable_ints(card); diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c index 078ef43d957..67de5b3c68b 100644 --- a/drivers/net/wireless/libertas/if_spi.c +++ b/drivers/net/wireless/libertas/if_spi.c @@ -143,8 +143,10 @@ static void spu_transaction_finish(struct if_spi_card *card) card->prev_xfer_time = jiffies; } -/* Write out a byte buffer to an SPI register, - * using a series of 16-bit transfers. */ +/* + * Write out a byte buffer to an SPI register, + * using a series of 16-bit transfers. + */ static int spu_write(struct if_spi_card *card, u16 reg, const u8 *buf, int len) { int err = 0; @@ -208,8 +210,10 @@ static int spu_read(struct if_spi_card *card, u16 reg, u8 *buf, int len) struct spi_transfer dummy_trans; struct spi_transfer data_trans; - /* You must take an even number of bytes from the SPU, even if you - * don't care about the last one. */ + /* + * You must take an even number of bytes from the SPU, even if you + * don't care about the last one. + */ BUG_ON(len & 0x1); spu_transaction_init(card); @@ -258,8 +262,10 @@ static inline int spu_read_u16(struct if_spi_card *card, u16 reg, u16 *val) return ret; } -/* Read 32 bits from an SPI register. - * The low 16 bits are read first. */ +/* + * Read 32 bits from an SPI register. + * The low 16 bits are read first. + */ static int spu_read_u32(struct if_spi_card *card, u16 reg, u32 *val) { __le32 buf; @@ -271,13 +277,15 @@ static int spu_read_u32(struct if_spi_card *card, u16 reg, u32 *val) return err; } -/* Keep reading 16 bits from an SPI register until you get the correct result. +/* + * Keep reading 16 bits from an SPI register until you get the correct result. * * If mask = 0, the correct result is any non-zero number. * If mask != 0, the correct result is any number where * number & target_mask == target * - * Returns -ETIMEDOUT if a second passes without the correct result. */ + * Returns -ETIMEDOUT if a second passes without the correct result. + */ static int spu_wait_for_u16(struct if_spi_card *card, u16 reg, u16 target_mask, u16 target) { @@ -305,8 +313,10 @@ static int spu_wait_for_u16(struct if_spi_card *card, u16 reg, } } -/* Read 16 bits from an SPI register until you receive a specific value. - * Returns -ETIMEDOUT if a 4 tries pass without success. */ +/* + * Read 16 bits from an SPI register until you receive a specific value. + * Returns -ETIMEDOUT if a 4 tries pass without success. + */ static int spu_wait_for_u32(struct if_spi_card *card, u32 reg, u32 target) { int err, try; @@ -328,8 +338,10 @@ static int spu_set_interrupt_mode(struct if_spi_card *card, { int err = 0; - /* We can suppress a host interrupt by clearing the appropriate - * bit in the "host interrupt status mask" register */ + /* + * We can suppress a host interrupt by clearing the appropriate + * bit in the "host interrupt status mask" register + */ if (suppress_host_int) { err = spu_write_u16(card, IF_SPI_HOST_INT_STATUS_MASK_REG, 0); if (err) @@ -345,10 +357,12 @@ static int spu_set_interrupt_mode(struct if_spi_card *card, return err; } - /* If auto-interrupts are on, the completion of certain transactions + /* + * If auto-interrupts are on, the completion of certain transactions * will trigger an interrupt automatically. If auto-interrupts * are off, we need to set the "Card Interrupt Cause" register to - * trigger a card interrupt. */ + * trigger a card interrupt. + */ if (auto_int) { err = spu_write_u16(card, IF_SPI_HOST_INT_CTRL_REG, IF_SPI_HICT_TX_DOWNLOAD_OVER_AUTO | @@ -402,8 +416,10 @@ static int spu_init(struct if_spi_card *card, int use_dummy_writes) int err = 0; u32 delay; - /* We have to start up in timed delay mode so that we can safely - * read the Delay Read Register. */ + /* + * We have to start up in timed delay mode so that we can safely + * read the Delay Read Register. + */ card->use_dummy_writes = 0; err = spu_set_bus_mode(card, IF_SPI_BUS_MODE_SPI_CLOCK_PHASE_RISING | @@ -459,8 +475,10 @@ static int if_spi_prog_helper_firmware(struct if_spi_card *card, /* Load helper firmware image */ while (bytes_remaining > 0) { - /* Scratch pad 1 should contain the number of bytes we - * want to download to the firmware */ + /* + * Scratch pad 1 should contain the number of bytes we + * want to download to the firmware + */ err = spu_write_u16(card, IF_SPI_SCRATCH_1_REG, HELPER_FW_LOAD_CHUNK_SZ); if (err) @@ -472,8 +490,10 @@ static int if_spi_prog_helper_firmware(struct if_spi_card *card, if (err) goto out; - /* Feed the data into the command read/write port reg - * in chunks of 64 bytes */ + /* + * Feed the data into the command read/write port reg + * in chunks of 64 bytes + */ memset(temp, 0, sizeof(temp)); memcpy(temp, fw, min(bytes_remaining, HELPER_FW_LOAD_CHUNK_SZ)); @@ -495,9 +515,11 @@ static int if_spi_prog_helper_firmware(struct if_spi_card *card, fw += HELPER_FW_LOAD_CHUNK_SZ; } - /* Once the helper / single stage firmware download is complete, + /* + * Once the helper / single stage firmware download is complete, * write 0 to scratch pad 1 and interrupt the - * bootloader. This completes the helper download. */ + * bootloader. This completes the helper download. + */ err = spu_write_u16(card, IF_SPI_SCRATCH_1_REG, FIRMWARE_DNLD_OK); if (err) goto out; @@ -517,16 +539,20 @@ out: return err; } -/* Returns the length of the next packet the firmware expects us to send - * Sets crc_err if the previous transfer had a CRC error. */ +/* + * Returns the length of the next packet the firmware expects us to send. + * Sets crc_err if the previous transfer had a CRC error. + */ static int if_spi_prog_main_firmware_check_len(struct if_spi_card *card, int *crc_err) { u16 len; int err = 0; - /* wait until the host interrupt status register indicates - * that we are ready to download */ + /* + * wait until the host interrupt status register indicates + * that we are ready to download + */ err = spu_wait_for_u16(card, IF_SPI_HOST_INT_STATUS_REG, IF_SPI_HIST_CMD_DOWNLOAD_RDY, IF_SPI_HIST_CMD_DOWNLOAD_RDY); @@ -587,8 +613,10 @@ static int if_spi_prog_main_firmware(struct if_spi_card *card, goto out; } if (bytes < 0) { - /* If there are no more bytes left, we would normally - * expect to have terminated with len = 0 */ + /* + * If there are no more bytes left, we would normally + * expect to have terminated with len = 0 + */ lbs_pr_err("Firmware load wants more bytes " "than we have to offer.\n"); break; @@ -660,14 +688,18 @@ static int if_spi_c2h_cmd(struct if_spi_card *card) u16 len; u8 i; - /* We need a buffer big enough to handle whatever people send to - * hw_host_to_card */ + /* + * We need a buffer big enough to handle whatever people send to + * hw_host_to_card + */ BUILD_BUG_ON(IF_SPI_CMD_BUF_SIZE < LBS_CMD_BUFFER_SIZE); BUILD_BUG_ON(IF_SPI_CMD_BUF_SIZE < LBS_UPLD_SIZE); - /* It's just annoying if the buffer size isn't a multiple of 4, because - * then we might have len < IF_SPI_CMD_BUF_SIZE but - * ALIGN(len, 4) > IF_SPI_CMD_BUF_SIZE */ + /* + * It's just annoying if the buffer size isn't a multiple of 4, because + * then we might have len < IF_SPI_CMD_BUF_SIZE but + * ALIGN(len, 4) > IF_SPI_CMD_BUF_SIZE + */ BUILD_BUG_ON(IF_SPI_CMD_BUF_SIZE % 4 != 0); lbs_deb_enter(LBS_DEB_SPI); @@ -838,8 +870,10 @@ static void if_spi_host_to_card_worker(struct work_struct *work) lbs_deb_enter(LBS_DEB_SPI); - /* Read the host interrupt status register to see what we - * can do. */ + /* + * Read the host interrupt status register to see what we + * can do. + */ err = spu_read_u16(card, IF_SPI_HOST_INT_STATUS_REG, &hiStatus); if (err) { @@ -858,12 +892,15 @@ static void if_spi_host_to_card_worker(struct work_struct *work) goto err; } - /* workaround: in PS mode, the card does not set the Command - * Download Ready bit, but it sets TX Download Ready. */ + /* + * workaround: in PS mode, the card does not set the Command + * Download Ready bit, but it sets TX Download Ready. + */ if (hiStatus & IF_SPI_HIST_CMD_DOWNLOAD_RDY || (card->priv->psstate != PS_STATE_FULL_POWER && (hiStatus & IF_SPI_HIST_TX_DOWNLOAD_RDY))) { - /* This means two things. First of all, + /* + * This means two things. First of all, * if there was a previous command sent, the card has * successfully received it. * Secondly, it is now ready to download another @@ -871,8 +908,7 @@ static void if_spi_host_to_card_worker(struct work_struct *work) */ lbs_host_to_card_done(card->priv); - /* Do we have any command packets from the host to - * send? */ + /* Do we have any command packets from the host to send? */ packet = NULL; spin_lock_irqsave(&card->buffer_lock, flags); if (!list_empty(&card->cmd_packet_list)) { @@ -886,8 +922,7 @@ static void if_spi_host_to_card_worker(struct work_struct *work) if_spi_h2c(card, packet, MVMS_CMD); } if (hiStatus & IF_SPI_HIST_TX_DOWNLOAD_RDY) { - /* Do we have any data packets from the host to - * send? */ + /* Do we have any data packets from the host to send? */ packet = NULL; spin_lock_irqsave(&card->buffer_lock, flags); if (!list_empty(&card->data_packet_list)) { @@ -914,7 +949,8 @@ err: * Host to Card * * Called from Libertas to transfer some data to the WLAN device - * We can't sleep here. */ + * We can't sleep here. + */ static int if_spi_host_to_card(struct lbs_private *priv, u8 type, u8 *buf, u16 nb) { @@ -1125,8 +1161,10 @@ static int __devinit if_spi_probe(struct spi_device *spi) if (err) goto free_card; - /* Register our card with libertas. - * This will call alloc_etherdev */ + /* + * Register our card with libertas. + * This will call alloc_etherdev. + */ priv = lbs_add_card(card, &spi->dev); if (!priv) { err = -ENOMEM; @@ -1153,9 +1191,11 @@ static int __devinit if_spi_probe(struct spi_device *spi) goto terminate_workqueue; } - /* Start the card. + /* + * Start the card. * This will call register_netdev, and we'll start - * getting interrupts... */ + * getting interrupts... + */ err = lbs_start_card(priv); if (err) goto release_irq; diff --git a/drivers/net/wireless/libertas/if_spi.h b/drivers/net/wireless/libertas/if_spi.h index 8b1417d3b71..9745bd407d7 100644 --- a/drivers/net/wireless/libertas/if_spi.h +++ b/drivers/net/wireless/libertas/if_spi.h @@ -86,34 +86,34 @@ #define IF_SPI_DEVICEID_CTRL_REG_TO_CARD_REV(dc) (dc & 0x000000ff) /***************** IF_SPI_HOST_INT_CTRL_REG *****************/ -/** Host Interrupt Control bit : Wake up */ +/* Host Interrupt Control bit : Wake up */ #define IF_SPI_HICT_WAKE_UP (1<<0) -/** Host Interrupt Control bit : WLAN ready */ +/* Host Interrupt Control bit : WLAN ready */ #define IF_SPI_HICT_WLAN_READY (1<<1) /*#define IF_SPI_HICT_FIFO_FIRST_HALF_EMPTY (1<<2) */ /*#define IF_SPI_HICT_FIFO_SECOND_HALF_EMPTY (1<<3) */ /*#define IF_SPI_HICT_IRQSRC_WLAN (1<<4) */ -/** Host Interrupt Control bit : Tx auto download */ +/* Host Interrupt Control bit : Tx auto download */ #define IF_SPI_HICT_TX_DOWNLOAD_OVER_AUTO (1<<5) -/** Host Interrupt Control bit : Rx auto upload */ +/* Host Interrupt Control bit : Rx auto upload */ #define IF_SPI_HICT_RX_UPLOAD_OVER_AUTO (1<<6) -/** Host Interrupt Control bit : Command auto download */ +/* Host Interrupt Control bit : Command auto download */ #define IF_SPI_HICT_CMD_DOWNLOAD_OVER_AUTO (1<<7) -/** Host Interrupt Control bit : Command auto upload */ +/* Host Interrupt Control bit : Command auto upload */ #define IF_SPI_HICT_CMD_UPLOAD_OVER_AUTO (1<<8) /***************** IF_SPI_CARD_INT_CAUSE_REG *****************/ -/** Card Interrupt Case bit : Tx download over */ +/* Card Interrupt Case bit : Tx download over */ #define IF_SPI_CIC_TX_DOWNLOAD_OVER (1<<0) -/** Card Interrupt Case bit : Rx upload over */ +/* Card Interrupt Case bit : Rx upload over */ #define IF_SPI_CIC_RX_UPLOAD_OVER (1<<1) -/** Card Interrupt Case bit : Command download over */ +/* Card Interrupt Case bit : Command download over */ #define IF_SPI_CIC_CMD_DOWNLOAD_OVER (1<<2) -/** Card Interrupt Case bit : Host event */ +/* Card Interrupt Case bit : Host event */ #define IF_SPI_CIC_HOST_EVENT (1<<3) -/** Card Interrupt Case bit : Command upload over */ +/* Card Interrupt Case bit : Command upload over */ #define IF_SPI_CIC_CMD_UPLOAD_OVER (1<<4) -/** Card Interrupt Case bit : Power down */ +/* Card Interrupt Case bit : Power down */ #define IF_SPI_CIC_POWER_DOWN (1<<5) /***************** IF_SPI_CARD_INT_STATUS_REG *****************/ @@ -138,51 +138,51 @@ #define IF_SPI_HICU_CMD_RD_FIFO_UNDERFLOW (1<<10) /***************** IF_SPI_HOST_INT_STATUS_REG *****************/ -/** Host Interrupt Status bit : Tx download ready */ +/* Host Interrupt Status bit : Tx download ready */ #define IF_SPI_HIST_TX_DOWNLOAD_RDY (1<<0) -/** Host Interrupt Status bit : Rx upload ready */ +/* Host Interrupt Status bit : Rx upload ready */ #define IF_SPI_HIST_RX_UPLOAD_RDY (1<<1) -/** Host Interrupt Status bit : Command download ready */ +/* Host Interrupt Status bit : Command download ready */ #define IF_SPI_HIST_CMD_DOWNLOAD_RDY (1<<2) -/** Host Interrupt Status bit : Card event */ +/* Host Interrupt Status bit : Card event */ #define IF_SPI_HIST_CARD_EVENT (1<<3) -/** Host Interrupt Status bit : Command upload ready */ +/* Host Interrupt Status bit : Command upload ready */ #define IF_SPI_HIST_CMD_UPLOAD_RDY (1<<4) -/** Host Interrupt Status bit : I/O write FIFO overflow */ +/* Host Interrupt Status bit : I/O write FIFO overflow */ #define IF_SPI_HIST_IO_WR_FIFO_OVERFLOW (1<<5) -/** Host Interrupt Status bit : I/O read FIFO underflow */ +/* Host Interrupt Status bit : I/O read FIFO underflow */ #define IF_SPI_HIST_IO_RD_FIFO_UNDRFLOW (1<<6) -/** Host Interrupt Status bit : Data write FIFO overflow */ +/* Host Interrupt Status bit : Data write FIFO overflow */ #define IF_SPI_HIST_DATA_WR_FIFO_OVERFLOW (1<<7) -/** Host Interrupt Status bit : Data read FIFO underflow */ +/* Host Interrupt Status bit : Data read FIFO underflow */ #define IF_SPI_HIST_DATA_RD_FIFO_UNDERFLOW (1<<8) -/** Host Interrupt Status bit : Command write FIFO overflow */ +/* Host Interrupt Status bit : Command write FIFO overflow */ #define IF_SPI_HIST_CMD_WR_FIFO_OVERFLOW (1<<9) -/** Host Interrupt Status bit : Command read FIFO underflow */ +/* Host Interrupt Status bit : Command read FIFO underflow */ #define IF_SPI_HIST_CMD_RD_FIFO_UNDERFLOW (1<<10) /***************** IF_SPI_HOST_INT_STATUS_MASK_REG *****************/ -/** Host Interrupt Status Mask bit : Tx download ready */ +/* Host Interrupt Status Mask bit : Tx download ready */ #define IF_SPI_HISM_TX_DOWNLOAD_RDY (1<<0) -/** Host Interrupt Status Mask bit : Rx upload ready */ +/* Host Interrupt Status Mask bit : Rx upload ready */ #define IF_SPI_HISM_RX_UPLOAD_RDY (1<<1) -/** Host Interrupt Status Mask bit : Command download ready */ +/* Host Interrupt Status Mask bit : Command download ready */ #define IF_SPI_HISM_CMD_DOWNLOAD_RDY (1<<2) -/** Host Interrupt Status Mask bit : Card event */ +/* Host Interrupt Status Mask bit : Card event */ #define IF_SPI_HISM_CARDEVENT (1<<3) -/** Host Interrupt Status Mask bit : Command upload ready */ +/* Host Interrupt Status Mask bit : Command upload ready */ #define IF_SPI_HISM_CMD_UPLOAD_RDY (1<<4) -/** Host Interrupt Status Mask bit : I/O write FIFO overflow */ +/* Host Interrupt Status Mask bit : I/O write FIFO overflow */ #define IF_SPI_HISM_IO_WR_FIFO_OVERFLOW (1<<5) -/** Host Interrupt Status Mask bit : I/O read FIFO underflow */ +/* Host Interrupt Status Mask bit : I/O read FIFO underflow */ #define IF_SPI_HISM_IO_RD_FIFO_UNDERFLOW (1<<6) -/** Host Interrupt Status Mask bit : Data write FIFO overflow */ +/* Host Interrupt Status Mask bit : Data write FIFO overflow */ #define IF_SPI_HISM_DATA_WR_FIFO_OVERFLOW (1<<7) -/** Host Interrupt Status Mask bit : Data write FIFO underflow */ +/* Host Interrupt Status Mask bit : Data write FIFO underflow */ #define IF_SPI_HISM_DATA_RD_FIFO_UNDERFLOW (1<<8) -/** Host Interrupt Status Mask bit : Command write FIFO overflow */ +/* Host Interrupt Status Mask bit : Command write FIFO overflow */ #define IF_SPI_HISM_CMD_WR_FIFO_OVERFLOW (1<<9) -/** Host Interrupt Status Mask bit : Command write FIFO underflow */ +/* Host Interrupt Status Mask bit : Command write FIFO underflow */ #define IF_SPI_HISM_CMD_RD_FIFO_UNDERFLOW (1<<10) /***************** IF_SPI_SPU_BUS_MODE_REG *****************/ diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c index 6524c70363d..e1e2128f411 100644 --- a/drivers/net/wireless/libertas/if_usb.c +++ b/drivers/net/wireless/libertas/if_usb.c @@ -1,6 +1,6 @@ -/** - * This file contains functions used in USB interface module. - */ +/* + * This file contains functions used in USB interface module. + */ #include <linux/delay.h> #include <linux/moduleparam.h> #include <linux/firmware.h> @@ -66,7 +66,7 @@ static int if_usb_reset_device(struct if_usb_card *cardp); /* sysfs hooks */ -/** +/* * Set function to write firmware to device's persistent memory */ static ssize_t if_usb_firmware_set(struct device *dev, @@ -85,7 +85,7 @@ static ssize_t if_usb_firmware_set(struct device *dev, return ret; } -/** +/* * lbs_flash_fw attribute to be exported per ethX interface through sysfs * (/sys/class/net/ethX/lbs_flash_fw). Use this like so to write firmware to * the device's persistent memory: @@ -94,7 +94,14 @@ static ssize_t if_usb_firmware_set(struct device *dev, static DEVICE_ATTR(lbs_flash_fw, 0200, NULL, if_usb_firmware_set); /** - * Set function to write firmware to device's persistent memory + * if_usb_boot2_set - write firmware to device's persistent memory + * + * @dev: target device + * @attr: device attributes + * @buf: firmware buffer to write + * @count: number of bytes to write + * + * returns: number of bytes written or negative error code */ static ssize_t if_usb_boot2_set(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) @@ -112,7 +119,7 @@ static ssize_t if_usb_boot2_set(struct device *dev, return ret; } -/** +/* * lbs_flash_boot2 attribute to be exported per ethX interface through sysfs * (/sys/class/net/ethX/lbs_flash_boot2). Use this like so to write firmware * to the device's persistent memory: @@ -121,9 +128,10 @@ static ssize_t if_usb_boot2_set(struct device *dev, static DEVICE_ATTR(lbs_flash_boot2, 0200, NULL, if_usb_boot2_set); /** - * @brief call back function to handle the status of the URB - * @param urb pointer to urb structure - * @return N/A + * if_usb_write_bulk_callback - callback function to handle the status + * of the URB + * @urb: pointer to &urb structure + * returns: N/A */ static void if_usb_write_bulk_callback(struct urb *urb) { @@ -150,9 +158,9 @@ static void if_usb_write_bulk_callback(struct urb *urb) } /** - * @brief free tx/rx urb, skb and rx buffer - * @param cardp pointer if_usb_card - * @return N/A + * if_usb_free - free tx/rx urb, skb and rx buffer + * @cardp: pointer to &if_usb_card + * returns: N/A */ static void if_usb_free(struct if_usb_card *cardp) { @@ -231,10 +239,10 @@ static void if_usb_reset_olpc_card(struct lbs_private *priv) #endif /** - * @brief sets the configuration values - * @param ifnum interface number - * @param id pointer to usb_device_id - * @return 0 on success, error code on failure + * if_usb_probe - sets the configuration values + * @intf: &usb_interface pointer + * @id: pointer to usb_device_id + * returns: 0 on success, error code on failure */ static int if_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) @@ -366,9 +374,9 @@ error: } /** - * @brief free resource and cleanup - * @param intf USB interface structure - * @return N/A + * if_usb_disconnect - free resource and cleanup + * @intf: USB interface structure + * returns: N/A */ static void if_usb_disconnect(struct usb_interface *intf) { @@ -398,9 +406,9 @@ static void if_usb_disconnect(struct usb_interface *intf) } /** - * @brief This function download FW - * @param priv pointer to struct lbs_private - * @return 0 + * if_usb_send_fw_pkt - download FW + * @cardp: pointer to &struct if_usb_card + * returns: 0 */ static int if_usb_send_fw_pkt(struct if_usb_card *cardp) { @@ -486,11 +494,11 @@ static int if_usb_reset_device(struct if_usb_card *cardp) } /** - * @brief This function transfer the data to the device. - * @param priv pointer to struct lbs_private - * @param payload pointer to payload data - * @param nb data length - * @return 0 or -1 + * usb_tx_block - transfer the data to the device + * @cardp: pointer to &struct if_usb_card + * @payload: pointer to payload data + * @nb: data length + * returns: 0 for success or negative error code */ static int usb_tx_block(struct if_usb_card *cardp, uint8_t *payload, uint16_t nb) { @@ -727,11 +735,11 @@ static inline void process_cmdrequest(int recvlength, uint8_t *recvbuff, } /** - * @brief This function reads of the packet into the upload buff, - * wake up the main thread and initialise the Rx callack. + * if_usb_receive - read the packet into the upload buffer, + * wake up the main thread and initialise the Rx callack * - * @param urb pointer to struct urb - * @return N/A + * @urb: pointer to &struct urb + * returns: N/A */ static void if_usb_receive(struct urb *urb) { @@ -802,12 +810,12 @@ rx_exit: } /** - * @brief This function downloads data to FW - * @param priv pointer to struct lbs_private structure - * @param type type of data - * @param buf pointer to data buffer - * @param len number of bytes - * @return 0 or -1 + * if_usb_host_to_card - downloads data to FW + * @priv: pointer to &struct lbs_private structure + * @type: type of data + * @payload: pointer to data buffer + * @nb: number of bytes + * returns: 0 for success or negative error code */ static int if_usb_host_to_card(struct lbs_private *priv, uint8_t type, uint8_t *payload, uint16_t nb) @@ -831,10 +839,11 @@ static int if_usb_host_to_card(struct lbs_private *priv, uint8_t type, } /** - * @brief This function issues Boot command to the Boot2 code - * @param ivalue 1:Boot from FW by USB-Download - * 2:Boot from FW in EEPROM - * @return 0 + * if_usb_issue_boot_command - issues Boot command to the Boot2 code + * @cardp: pointer to &if_usb_card + * @ivalue: 1:Boot from FW by USB-Download + * 2:Boot from FW in EEPROM + * returns: 0 for success or negative error code */ static int if_usb_issue_boot_command(struct if_usb_card *cardp, int ivalue) { @@ -853,11 +862,11 @@ static int if_usb_issue_boot_command(struct if_usb_card *cardp, int ivalue) /** - * @brief This function checks the validity of Boot2/FW image. + * check_fwfile_format - check the validity of Boot2/FW image * - * @param data pointer to image - * len image length - * @return 0 or -1 + * @data: pointer to image + * @totlen: image length + * returns: 0 (good) or 1 (failure) */ static int check_fwfile_format(const uint8_t *data, uint32_t totlen) { @@ -901,13 +910,13 @@ static int check_fwfile_format(const uint8_t *data, uint32_t totlen) /** -* @brief This function programs the firmware subject to cmd +* if_usb_prog_firmware - programs the firmware subject to cmd * -* @param cardp the if_usb_card descriptor -* fwname firmware or boot2 image file name -* cmd either BOOT_CMD_FW_BY_USB, BOOT_CMD_UPDATE_FW, -* or BOOT_CMD_UPDATE_BOOT2. -* @return 0 or error code +* @cardp: the if_usb_card descriptor +* @fwname: firmware or boot2 image file name +* @cmd: either BOOT_CMD_FW_BY_USB, BOOT_CMD_UPDATE_FW, +* or BOOT_CMD_UPDATE_BOOT2. +* returns: 0 or error code */ static int if_usb_prog_firmware(struct if_usb_card *cardp, const char *fwname, int cmd) diff --git a/drivers/net/wireless/libertas/if_usb.h b/drivers/net/wireless/libertas/if_usb.h index d819e7e3c9a..6e42eac331d 100644 --- a/drivers/net/wireless/libertas/if_usb.h +++ b/drivers/net/wireless/libertas/if_usb.h @@ -6,9 +6,9 @@ struct lbs_private; -/** - * This file contains definition for USB interface. - */ +/* + * This file contains definition for USB interface. + */ #define CMD_TYPE_REQUEST 0xF00DFACE #define CMD_TYPE_DATA 0xBEADC0DE #define CMD_TYPE_INDICATION 0xBEEFFACE @@ -40,7 +40,7 @@ struct bootcmdresp uint8_t pad[2]; }; -/** USB card description structure*/ +/* USB card description structure*/ struct if_usb_card { struct usb_device *udev; uint32_t model; /* MODEL_* */ @@ -77,7 +77,7 @@ struct if_usb_card { __le16 boot2_version; }; -/** fwheader */ +/* fwheader */ struct fwheader { __le32 dnldcmd; __le32 baseaddr; @@ -86,14 +86,14 @@ struct fwheader { }; #define FW_MAX_DATA_BLK_SIZE 600 -/** FWData */ +/* FWData */ struct fwdata { struct fwheader hdr; __le32 seqnum; uint8_t data[0]; }; -/** fwsyncheader */ +/* fwsyncheader */ struct fwsyncheader { __le32 cmd; __le32 seqnum; diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c index ca8149cd5bd..ed57cf863b6 100644 --- a/drivers/net/wireless/libertas/main.c +++ b/drivers/net/wireless/libertas/main.c @@ -1,8 +1,8 @@ -/** - * This file contains the major functions in WLAN - * driver. It includes init, exit, open, close and main - * thread etc.. - */ +/* + * This file contains the major functions in WLAN + * driver. It includes init, exit, open, close and main + * thread etc.. + */ #include <linux/moduleparam.h> #include <linux/delay.h> @@ -35,18 +35,20 @@ EXPORT_SYMBOL_GPL(lbs_debug); module_param_named(libertas_debug, lbs_debug, int, 0644); -/* This global structure is used to send the confirm_sleep command as - * fast as possible down to the firmware. */ +/* + * This global structure is used to send the confirm_sleep command as + * fast as possible down to the firmware. + */ struct cmd_confirm_sleep confirm_sleep; -/** +/* * the table to keep region code */ u16 lbs_region_code_to_index[MRVDRV_MAX_REGION_CODE] = { 0x10, 0x20, 0x30, 0x31, 0x32, 0x40 }; -/** +/* * FW rate table. FW refers to rates by their index in this table, not by the * rate value itself. Values of 0x00 are * reserved positions. @@ -57,10 +59,10 @@ static u8 fw_data_rates[MAX_RATES] = }; /** - * @brief use index to get the data rate + * lbs_fw_index_to_data_rate - use index to get the data rate * - * @param idx The index of data rate - * @return data rate or 0 + * @idx: The index of data rate + * returns: data rate or 0 */ u32 lbs_fw_index_to_data_rate(u8 idx) { @@ -70,10 +72,10 @@ u32 lbs_fw_index_to_data_rate(u8 idx) } /** - * @brief use rate to get the index + * lbs_data_rate_to_fw_index - use rate to get the index * - * @param rate data rate - * @return index or 0 + * @rate: data rate + * returns: index or 0 */ u8 lbs_data_rate_to_fw_index(u32 rate) { @@ -91,10 +93,10 @@ u8 lbs_data_rate_to_fw_index(u32 rate) /** - * @brief This function opens the ethX interface + * lbs_dev_open - open the ethX interface * - * @param dev A pointer to net_device structure - * @return 0 or -EBUSY if monitor mode active + * @dev: A pointer to &net_device structure + * returns: 0 or -EBUSY if monitor mode active */ static int lbs_dev_open(struct net_device *dev) { @@ -120,10 +122,10 @@ static int lbs_dev_open(struct net_device *dev) } /** - * @brief This function closes the ethX interface + * lbs_eth_stop - close the ethX interface * - * @param dev A pointer to net_device structure - * @return 0 + * @dev: A pointer to &net_device structure + * returns: 0 */ static int lbs_eth_stop(struct net_device *dev) { @@ -336,12 +338,12 @@ void lbs_set_multicast_list(struct net_device *dev) } /** - * @brief This function handles the major jobs in the LBS driver. + * lbs_thread - handles the major jobs in the LBS driver. * It handles all events generated by firmware, RX data received * from firmware and TX data sent from kernel. * - * @param data A pointer to lbs_thread structure - * @return 0 + * @data: A pointer to &lbs_thread structure + * returns: 0 */ static int lbs_thread(void *data) { @@ -540,11 +542,11 @@ static int lbs_thread(void *data) } /** - * @brief This function gets the HW spec from the firmware and sets - * some basic parameters. + * lbs_setup_firmware - gets the HW spec from the firmware and sets + * some basic parameters * - * @param priv A pointer to struct lbs_private structure - * @return 0 or -1 + * @priv: A pointer to &struct lbs_private structure + * returns: 0 or -1 */ static int lbs_setup_firmware(struct lbs_private *priv) { @@ -630,8 +632,10 @@ int lbs_resume(struct lbs_private *priv) EXPORT_SYMBOL_GPL(lbs_resume); /** - * This function handles the timeout of command sending. - * It will re-send the same command again. + * lbs_cmd_timeout_handler - handles the timeout of command sending. + * It will re-send the same command again. + * + * @data: &struct lbs_private pointer */ static void lbs_cmd_timeout_handler(unsigned long data) { @@ -655,8 +659,10 @@ out: } /** - * This function put the device back to deep sleep mode when timer expires - * and no activity (command, event, data etc.) is detected. + * auto_deepsleep_timer_fn - put the device back to deep sleep mode when + * timer expires and no activity (command, event, data etc.) is detected. + * @data: &struct lbs_private pointer + * returns: N/A */ static void auto_deepsleep_timer_fn(unsigned long data) { @@ -792,11 +798,12 @@ static const struct net_device_ops lbs_netdev_ops = { }; /** - * @brief This function adds the card. it will probe the + * lbs_add_card - adds the card. It will probe the * card, allocate the lbs_priv and initialize the device. * - * @param card A pointer to card - * @return A pointer to struct lbs_private structure + * @card: A pointer to card + * @dmdev: A pointer to &struct device + * returns: A pointer to &struct lbs_private structure */ struct lbs_private *lbs_add_card(void *card, struct device *dmdev) { @@ -1057,19 +1064,19 @@ void lbs_notify_command_response(struct lbs_private *priv, u8 resp_idx) EXPORT_SYMBOL_GPL(lbs_notify_command_response); /** - * @brief Retrieves two-stage firmware + * lbs_get_firmware - Retrieves two-stage firmware * - * @param dev A pointer to device structure - * @param user_helper User-defined helper firmware file - * @param user_mainfw User-defined main firmware file - * @param card_model Bus-specific card model ID used to filter firmware table - * elements - * @param fw_table Table of firmware file names and device model numbers - * terminated by an entry with a NULL helper name - * @param helper On success, the helper firmware; caller must free - * @param mainfw On success, the main firmware; caller must free + * @dev: A pointer to &device structure + * @user_helper: User-defined helper firmware file + * @user_mainfw: User-defined main firmware file + * @card_model: Bus-specific card model ID used to filter firmware table + * elements + * @fw_table: Table of firmware file names and device model numbers + * terminated by an entry with a NULL helper name + * @helper: On success, the helper firmware; caller must free + * @mainfw: On success, the main firmware; caller must free * - * @return 0 on success, non-zero on failure + * returns: 0 on success, non-zero on failure */ int lbs_get_firmware(struct device *dev, const char *user_helper, const char *user_mainfw, u32 card_model, diff --git a/drivers/net/wireless/libertas/mesh.c b/drivers/net/wireless/libertas/mesh.c index 9d097b9c800..a0804d12bf2 100644 --- a/drivers/net/wireless/libertas/mesh.c +++ b/drivers/net/wireless/libertas/mesh.c @@ -16,12 +16,15 @@ * Mesh sysfs support */ -/** +/* * Attributes exported through sysfs */ /** - * @brief Get function for sysfs attribute anycast_mask + * lbs_anycast_get - Get function for sysfs attribute anycast_mask + * @dev: the &struct device + * @attr: device attributes + * @buf: buffer where data will be returned */ static ssize_t lbs_anycast_get(struct device *dev, struct device_attribute *attr, char * buf) @@ -40,7 +43,11 @@ static ssize_t lbs_anycast_get(struct device *dev, } /** - * @brief Set function for sysfs attribute anycast_mask + * lbs_anycast_set - Set function for sysfs attribute anycast_mask + * @dev: the &struct device + * @attr: device attributes + * @buf: buffer that contains new attribute value + * @count: size of buffer */ static ssize_t lbs_anycast_set(struct device *dev, struct device_attribute *attr, const char * buf, size_t count) @@ -62,7 +69,10 @@ static ssize_t lbs_anycast_set(struct device *dev, } /** - * @brief Get function for sysfs attribute prb_rsp_limit + * lbs_prb_rsp_limit_get - Get function for sysfs attribute prb_rsp_limit + * @dev: the &struct device + * @attr: device attributes + * @buf: buffer where data will be returned */ static ssize_t lbs_prb_rsp_limit_get(struct device *dev, struct device_attribute *attr, char *buf) @@ -85,7 +95,11 @@ static ssize_t lbs_prb_rsp_limit_get(struct device *dev, } /** - * @brief Set function for sysfs attribute prb_rsp_limit + * lbs_prb_rsp_limit_set - Set function for sysfs attribute prb_rsp_limit + * @dev: the &struct device + * @attr: device attributes + * @buf: buffer that contains new attribute value + * @count: size of buffer */ static ssize_t lbs_prb_rsp_limit_set(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) @@ -114,7 +128,10 @@ static ssize_t lbs_prb_rsp_limit_set(struct device *dev, } /** - * Get function for sysfs attribute mesh + * lbs_mesh_get - Get function for sysfs attribute mesh + * @dev: the &struct device + * @attr: device attributes + * @buf: buffer where data will be returned */ static ssize_t lbs_mesh_get(struct device *dev, struct device_attribute *attr, char * buf) @@ -124,7 +141,11 @@ static ssize_t lbs_mesh_get(struct device *dev, } /** - * Set function for sysfs attribute mesh + * lbs_mesh_set - Set function for sysfs attribute mesh + * @dev: the &struct device + * @attr: device attributes + * @buf: buffer that contains new attribute value + * @count: size of buffer */ static ssize_t lbs_mesh_set(struct device *dev, struct device_attribute *attr, const char * buf, size_t count) @@ -151,19 +172,19 @@ static ssize_t lbs_mesh_set(struct device *dev, return count; } -/** +/* * lbs_mesh attribute to be exported per ethX interface * through sysfs (/sys/class/net/ethX/lbs_mesh) */ static DEVICE_ATTR(lbs_mesh, 0644, lbs_mesh_get, lbs_mesh_set); -/** +/* * anycast_mask attribute to be exported per mshX interface * through sysfs (/sys/class/net/mshX/anycast_mask) */ static DEVICE_ATTR(anycast_mask, 0644, lbs_anycast_get, lbs_anycast_set); -/** +/* * prb_rsp_limit attribute to be exported per mshX interface * through sysfs (/sys/class/net/mshX/prb_rsp_limit) */ @@ -274,10 +295,10 @@ int lbs_deinit_mesh(struct lbs_private *priv) /** - * @brief This function closes the mshX interface + * lbs_mesh_stop - close the mshX interface * - * @param dev A pointer to net_device structure - * @return 0 + * @dev: A pointer to &net_device structure + * returns: 0 */ static int lbs_mesh_stop(struct net_device *dev) { @@ -301,10 +322,10 @@ static int lbs_mesh_stop(struct net_device *dev) } /** - * @brief This function opens the mshX interface + * lbs_mesh_dev_open - open the mshX interface * - * @param dev A pointer to net_device structure - * @return 0 or -EBUSY if monitor mode active + * @dev: A pointer to &net_device structure + * returns: 0 or -EBUSY if monitor mode active */ static int lbs_mesh_dev_open(struct net_device *dev) { @@ -342,10 +363,10 @@ static const struct net_device_ops mesh_netdev_ops = { }; /** - * @brief This function adds mshX interface + * lbs_add_mesh - add mshX interface * - * @param priv A pointer to the struct lbs_private structure - * @return 0 if successful, -X otherwise + * @priv: A pointer to the &struct lbs_private structure + * returns: 0 if successful, -X otherwise */ int lbs_add_mesh(struct lbs_private *priv) { @@ -456,13 +477,13 @@ void lbs_mesh_set_txpd(struct lbs_private *priv, */ /** - * @brief Add or delete Mesh Blinding Table entries + * lbs_mesh_bt_add_del - Add or delete Mesh Blinding Table entries * - * @param priv A pointer to struct lbs_private structure - * @param add TRUE to add the entry, FALSE to delete it - * @param addr1 Destination address to blind or unblind + * @priv: A pointer to &struct lbs_private structure + * @add: TRUE to add the entry, FALSE to delete it + * @addr1: Destination address to blind or unblind * - * @return 0 on success, error on failure + * returns: 0 on success, error on failure */ int lbs_mesh_bt_add_del(struct lbs_private *priv, bool add, u8 *addr1) { @@ -493,11 +514,11 @@ int lbs_mesh_bt_add_del(struct lbs_private *priv, bool add, u8 *addr1) } /** - * @brief Reset/clear the mesh blinding table + * lbs_mesh_bt_reset - Reset/clear the mesh blinding table * - * @param priv A pointer to struct lbs_private structure + * @priv: A pointer to &struct lbs_private structure * - * @return 0 on success, error on failure + * returns: 0 on success, error on failure */ int lbs_mesh_bt_reset(struct lbs_private *priv) { @@ -517,17 +538,18 @@ int lbs_mesh_bt_reset(struct lbs_private *priv) } /** - * @brief Gets the inverted status of the mesh blinding table + * lbs_mesh_bt_get_inverted - Gets the inverted status of the mesh + * blinding table * - * Normally the firmware "blinds" or ignores traffic from mesh nodes in the - * table, but an inverted table allows *only* traffic from nodes listed in - * the table. + * Normally the firmware "blinds" or ignores traffic from mesh nodes in the + * table, but an inverted table allows *only* traffic from nodes listed in + * the table. * - * @param priv A pointer to struct lbs_private structure - * @param invert On success, TRUE if the blinding table is inverted, - * FALSE if it is not inverted + * @priv: A pointer to &struct lbs_private structure + * @inverted: On success, TRUE if the blinding table is inverted, + * FALSE if it is not inverted * - * @return 0 on success, error on failure + * returns: 0 on success, error on failure */ int lbs_mesh_bt_get_inverted(struct lbs_private *priv, bool *inverted) { @@ -551,18 +573,19 @@ int lbs_mesh_bt_get_inverted(struct lbs_private *priv, bool *inverted) } /** - * @brief Sets the inverted status of the mesh blinding table + * lbs_mesh_bt_set_inverted - Sets the inverted status of the mesh + * blinding table * - * Normally the firmware "blinds" or ignores traffic from mesh nodes in the - * table, but an inverted table allows *only* traffic from nodes listed in - * the table. + * Normally the firmware "blinds" or ignores traffic from mesh nodes in the + * table, but an inverted table allows *only* traffic from nodes listed in + * the table. * - * @param priv A pointer to struct lbs_private structure - * @param invert TRUE to invert the blinding table (only traffic from - * listed nodes allowed), FALSE to return it - * to normal state (listed nodes ignored) + * @priv: A pointer to &struct lbs_private structure + * @inverted: TRUE to invert the blinding table (only traffic from + * listed nodes allowed), FALSE to return it + * to normal state (listed nodes ignored) * - * @return 0 on success, error on failure + * returns: 0 on success, error on failure */ int lbs_mesh_bt_set_inverted(struct lbs_private *priv, bool inverted) { @@ -583,13 +606,13 @@ int lbs_mesh_bt_set_inverted(struct lbs_private *priv, bool inverted) } /** - * @brief List an entry in the mesh blinding table + * lbs_mesh_bt_get_entry - List an entry in the mesh blinding table * - * @param priv A pointer to struct lbs_private structure - * @param id The ID of the entry to list - * @param addr1 MAC address associated with the table entry + * @priv: A pointer to &struct lbs_private structure + * @id: The ID of the entry to list + * @addr1: MAC address associated with the table entry * - * @return 0 on success, error on failure + * returns: 0 on success, error on failure */ int lbs_mesh_bt_get_entry(struct lbs_private *priv, u32 id, u8 *addr1) { @@ -614,14 +637,14 @@ int lbs_mesh_bt_get_entry(struct lbs_private *priv, u32 id, u8 *addr1) } /** - * @brief Access the mesh forwarding table + * lbs_cmd_fwt_access - Access the mesh forwarding table * - * @param priv A pointer to struct lbs_private structure - * @param cmd_action The forwarding table action to perform - * @param cmd The pre-filled FWT_ACCESS command + * @priv: A pointer to &struct lbs_private structure + * @cmd_action: The forwarding table action to perform + * @cmd: The pre-filled FWT_ACCESS command * - * @return 0 on success and 'cmd' will be filled with the - * firmware's response + * returns: 0 on success and 'cmd' will be filled with the + * firmware's response */ int lbs_cmd_fwt_access(struct lbs_private *priv, u16 cmd_action, struct cmd_ds_fwt_access *cmd) @@ -774,7 +797,10 @@ static int mesh_get_default_parameters(struct device *dev, } /** - * @brief Get function for sysfs attribute bootflag + * bootflag_get - Get function for sysfs attribute bootflag + * @dev: the &struct device + * @attr: device attributes + * @buf: buffer where data will be returned */ static ssize_t bootflag_get(struct device *dev, struct device_attribute *attr, char *buf) @@ -791,7 +817,11 @@ static ssize_t bootflag_get(struct device *dev, } /** - * @brief Set function for sysfs attribute bootflag + * bootflag_set - Set function for sysfs attribute bootflag + * @dev: the &struct device + * @attr: device attributes + * @buf: buffer that contains new attribute value + * @count: size of buffer */ static ssize_t bootflag_set(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) @@ -817,7 +847,10 @@ static ssize_t bootflag_set(struct device *dev, struct device_attribute *attr, } /** - * @brief Get function for sysfs attribute boottime + * boottime_get - Get function for sysfs attribute boottime + * @dev: the &struct device + * @attr: device attributes + * @buf: buffer where data will be returned */ static ssize_t boottime_get(struct device *dev, struct device_attribute *attr, char *buf) @@ -834,7 +867,11 @@ static ssize_t boottime_get(struct device *dev, } /** - * @brief Set function for sysfs attribute boottime + * boottime_set - Set function for sysfs attribute boottime + * @dev: the &struct device + * @attr: device attributes + * @buf: buffer that contains new attribute value + * @count: size of buffer */ static ssize_t boottime_set(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) @@ -869,7 +906,10 @@ static ssize_t boottime_set(struct device *dev, } /** - * @brief Get function for sysfs attribute channel + * channel_get - Get function for sysfs attribute channel + * @dev: the &struct device + * @attr: device attributes + * @buf: buffer where data will be returned */ static ssize_t channel_get(struct device *dev, struct device_attribute *attr, char *buf) @@ -886,7 +926,11 @@ static ssize_t channel_get(struct device *dev, } /** - * @brief Set function for sysfs attribute channel + * channel_set - Set function for sysfs attribute channel + * @dev: the &struct device + * @attr: device attributes + * @buf: buffer that contains new attribute value + * @count: size of buffer */ static ssize_t channel_set(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) @@ -912,7 +956,10 @@ static ssize_t channel_set(struct device *dev, struct device_attribute *attr, } /** - * @brief Get function for sysfs attribute mesh_id + * mesh_id_get - Get function for sysfs attribute mesh_id + * @dev: the &struct device + * @attr: device attributes + * @buf: buffer where data will be returned */ static ssize_t mesh_id_get(struct device *dev, struct device_attribute *attr, char *buf) @@ -938,7 +985,11 @@ static ssize_t mesh_id_get(struct device *dev, struct device_attribute *attr, } /** - * @brief Set function for sysfs attribute mesh_id + * mesh_id_set - Set function for sysfs attribute mesh_id + * @dev: the &struct device + * @attr: device attributes + * @buf: buffer that contains new attribute value + * @count: size of buffer */ static ssize_t mesh_id_set(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) @@ -980,7 +1031,10 @@ static ssize_t mesh_id_set(struct device *dev, struct device_attribute *attr, } /** - * @brief Get function for sysfs attribute protocol_id + * protocol_id_get - Get function for sysfs attribute protocol_id + * @dev: the &struct device + * @attr: device attributes + * @buf: buffer where data will be returned */ static ssize_t protocol_id_get(struct device *dev, struct device_attribute *attr, char *buf) @@ -997,7 +1051,11 @@ static ssize_t protocol_id_get(struct device *dev, } /** - * @brief Set function for sysfs attribute protocol_id + * protocol_id_set - Set function for sysfs attribute protocol_id + * @dev: the &struct device + * @attr: device attributes + * @buf: buffer that contains new attribute value + * @count: size of buffer */ static ssize_t protocol_id_set(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) @@ -1034,7 +1092,10 @@ static ssize_t protocol_id_set(struct device *dev, } /** - * @brief Get function for sysfs attribute metric_id + * metric_id_get - Get function for sysfs attribute metric_id + * @dev: the &struct device + * @attr: device attributes + * @buf: buffer where data will be returned */ static ssize_t metric_id_get(struct device *dev, struct device_attribute *attr, char *buf) @@ -1051,7 +1112,11 @@ static ssize_t metric_id_get(struct device *dev, } /** - * @brief Set function for sysfs attribute metric_id + * metric_id_set - Set function for sysfs attribute metric_id + * @dev: the &struct device + * @attr: device attributes + * @buf: buffer that contains new attribute value + * @count: size of buffer */ static ssize_t metric_id_set(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) @@ -1088,7 +1153,10 @@ static ssize_t metric_id_set(struct device *dev, struct device_attribute *attr, } /** - * @brief Get function for sysfs attribute capability + * capability_get - Get function for sysfs attribute capability + * @dev: the &struct device + * @attr: device attributes + * @buf: buffer where data will be returned */ static ssize_t capability_get(struct device *dev, struct device_attribute *attr, char *buf) @@ -1105,7 +1173,11 @@ static ssize_t capability_get(struct device *dev, } /** - * @brief Set function for sysfs attribute capability + * capability_set - Set function for sysfs attribute capability + * @dev: the &struct device + * @attr: device attributes + * @buf: buffer that contains new attribute value + * @count: size of buffer */ static ssize_t capability_set(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) diff --git a/drivers/net/wireless/libertas/mesh.h b/drivers/net/wireless/libertas/mesh.h index afb2e8dead3..ee95c73ed5f 100644 --- a/drivers/net/wireless/libertas/mesh.h +++ b/drivers/net/wireless/libertas/mesh.h @@ -1,6 +1,6 @@ -/** - * Contains all definitions needed for the Libertas' MESH implementation. - */ +/* + * Contains all definitions needed for the Libertas' MESH implementation. + */ #ifndef _LBS_MESH_H_ #define _LBS_MESH_H_ diff --git a/drivers/net/wireless/libertas/rx.c b/drivers/net/wireless/libertas/rx.c index a2b1df21d28..a3f4b55aa41 100644 --- a/drivers/net/wireless/libertas/rx.c +++ b/drivers/net/wireless/libertas/rx.c @@ -1,6 +1,6 @@ -/** - * This file contains the handling of RX in wlan driver. - */ +/* + * This file contains the handling of RX in wlan driver. + */ #include <linux/etherdevice.h> #include <linux/slab.h> #include <linux/types.h> @@ -40,12 +40,12 @@ static int process_rxed_802_11_packet(struct lbs_private *priv, struct sk_buff *skb); /** - * @brief This function processes received packet and forwards it - * to kernel/upper layer + * lbs_process_rxed_packet - processes received packet and forwards it + * to kernel/upper layer * - * @param priv A pointer to struct lbs_private - * @param skb A pointer to skb which includes the received packet - * @return 0 or -1 + * @priv: A pointer to &struct lbs_private + * @skb: A pointer to skb which includes the received packet + * returns: 0 or -1 */ int lbs_process_rxed_packet(struct lbs_private *priv, struct sk_buff *skb) { @@ -156,11 +156,11 @@ done: EXPORT_SYMBOL_GPL(lbs_process_rxed_packet); /** - * @brief This function converts Tx/Rx rates from the Marvell WLAN format - * (see Table 2 in Section 3.1) to IEEE80211_RADIOTAP_RATE units (500 Kb/s) + * convert_mv_rate_to_radiotap - converts Tx/Rx rates from Marvell WLAN format + * (see Table 2 in Section 3.1) to IEEE80211_RADIOTAP_RATE units (500 Kb/s) * - * @param rate Input rate - * @return Output Rate (0 if invalid) + * @rate: Input rate + * returns: Output Rate (0 if invalid) */ static u8 convert_mv_rate_to_radiotap(u8 rate) { @@ -196,12 +196,12 @@ static u8 convert_mv_rate_to_radiotap(u8 rate) } /** - * @brief This function processes a received 802.11 packet and forwards it - * to kernel/upper layer + * process_rxed_802_11_packet - processes a received 802.11 packet and forwards + * it to kernel/upper layer * - * @param priv A pointer to struct lbs_private - * @param skb A pointer to skb which includes the received packet - * @return 0 or -1 + * @priv: A pointer to &struct lbs_private + * @skb: A pointer to skb which includes the received packet + * returns: 0 or -1 */ static int process_rxed_802_11_packet(struct lbs_private *priv, struct sk_buff *skb) diff --git a/drivers/net/wireless/libertas/tx.c b/drivers/net/wireless/libertas/tx.c index 8000ca6165d..bbb95f88dc0 100644 --- a/drivers/net/wireless/libertas/tx.c +++ b/drivers/net/wireless/libertas/tx.c @@ -1,6 +1,6 @@ -/** - * This file contains the handling of TX in wlan driver. - */ +/* + * This file contains the handling of TX in wlan driver. + */ #include <linux/netdevice.h> #include <linux/etherdevice.h> #include <linux/sched.h> @@ -13,11 +13,11 @@ #include "dev.h" /** - * @brief This function converts Tx/Rx rates from IEEE80211_RADIOTAP_RATE - * units (500 Kb/s) into Marvell WLAN format (see Table 8 in Section 3.2.1) + * convert_radiotap_rate_to_mv - converts Tx/Rx rates from IEEE80211_RADIOTAP_RATE + * units (500 Kb/s) into Marvell WLAN format (see Table 8 in Section 3.2.1) * - * @param rate Input rate - * @return Output Rate (0 if invalid) + * @rate: Input rate + * returns: Output Rate (0 if invalid) */ static u32 convert_radiotap_rate_to_mv(u8 rate) { @@ -51,12 +51,12 @@ static u32 convert_radiotap_rate_to_mv(u8 rate) } /** - * @brief This function checks the conditions and sends packet to IF - * layer if everything is ok. + * lbs_hard_start_xmit - checks the conditions and sends packet to IF + * layer if everything is ok * - * @param priv A pointer to struct lbs_private structure - * @param skb A pointer to skb which includes TX packet - * @return 0 or -1 + * @skb: A pointer to skb which includes TX packet + * @dev: A pointer to the &struct net_device + * returns: 0 or -1 */ netdev_tx_t lbs_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) { @@ -168,13 +168,13 @@ netdev_tx_t lbs_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) } /** - * @brief This function sends to the host the last transmitted packet, - * filling the radiotap headers with transmission information. + * lbs_send_tx_feedback - sends to the host the last transmitted packet, + * filling the radiotap headers with transmission information. * - * @param priv A pointer to struct lbs_private structure - * @param status A 32 bit value containing transmission status. + * @priv: A pointer to &struct lbs_private structure + * @try_count: A 32-bit value containing transmission retry status. * - * @returns void + * returns: void */ void lbs_send_tx_feedback(struct lbs_private *priv, u32 try_count) { diff --git a/drivers/net/wireless/libertas/types.h b/drivers/net/wireless/libertas/types.h index 462fbb4cb74..cf1d9b047ee 100644 --- a/drivers/net/wireless/libertas/types.h +++ b/drivers/net/wireless/libertas/types.h @@ -1,6 +1,6 @@ -/** - * This header file contains definition for global types - */ +/* + * This header file contains definition for global types + */ #ifndef _LBS_TYPES_H_ #define _LBS_TYPES_H_ @@ -54,7 +54,7 @@ union ieee_phy_param_set { struct ieee_ie_ds_param_set ds; } __packed; -/** TLV type ID definition */ +/* TLV type ID definition */ #define PROPRIETARY_TLV_BASE_ID 0x0100 /* Terminating TLV type */ @@ -96,7 +96,7 @@ union ieee_phy_param_set { #define TLV_TYPE_MESH_ID (PROPRIETARY_TLV_BASE_ID + 37) #define TLV_TYPE_OLD_MESH_ID (PROPRIETARY_TLV_BASE_ID + 291) -/** TLV related data structures*/ +/* TLV related data structures */ struct mrvl_ie_header { __le16 type; __le16 len; @@ -177,7 +177,7 @@ struct mrvl_ie_auth_type { __le16 auth; } __packed; -/** Local Power capability */ +/* Local Power capability */ struct mrvl_ie_power_capability { struct mrvl_ie_header header; s8 minpower; @@ -235,9 +235,11 @@ struct mrvl_ie_ledbhv { struct led_bhv ledbhv[1]; } __packed; -/* Meant to be packed as the value member of a struct ieee80211_info_element. +/* + * Meant to be packed as the value member of a struct ieee80211_info_element. * Note that the len member of the ieee80211_info_element varies depending on - * the mesh_id_len */ + * the mesh_id_len + */ struct mrvl_meshie_val { uint8_t oui[3]; uint8_t type; |