diff options
271 files changed, 5821 insertions, 1952 deletions
diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt index c07f7b4fb88..71c4da41344 100644 --- a/Documentation/cgroups/memory.txt +++ b/Documentation/cgroups/memory.txt @@ -466,6 +466,10 @@ Note: 5.3 swappiness Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only. +Please note that unlike the global swappiness, memcg knob set to 0 +really prevents from any swapping even if there is a swap storage +available. This might lead to memcg OOM killer if there are no file +pages to reclaim. Following cgroups' swappiness can't be changed. - root cgroup (uses /proc/sys/vm/swappiness). diff --git a/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt b/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt new file mode 100644 index 00000000000..558cdf3c9ab --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt @@ -0,0 +1,22 @@ +GPIO line that should be set high/low to power off a device + +Required properties: +- compatible : should be "gpio-poweroff". +- gpios : The GPIO to set high/low, see "gpios property" in + Documentation/devicetree/bindings/gpio/gpio.txt. If the pin should be + low to power down the board set it to "Active Low", otherwise set + gpio to "Active High". + +Optional properties: +- input : Initially configure the GPIO line as an input. Only reconfigure + it to an output when the pm_power_off function is called. If this optional + property is not specified, the GPIO is initialized as an output in its + inactive state. + + +Examples: + +gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio 4 0>; /* GPIO 4 Active Low */ +}; diff --git a/Documentation/devicetree/bindings/gpio/leds-ns2.txt b/Documentation/devicetree/bindings/gpio/leds-ns2.txt new file mode 100644 index 00000000000..aef3aca34d2 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/leds-ns2.txt @@ -0,0 +1,26 @@ +Binding for dual-GPIO LED found on Network Space v2 (and parents). + +Required properties: +- compatible: "lacie,ns2-leds". + +Each LED is represented as a sub-node of the ns2-leds device. + +Required sub-node properties: +- cmd-gpio: Command LED GPIO. See OF device-tree GPIO specification. +- slow-gpio: Slow LED GPIO. See OF device-tree GPIO specification. + +Optional sub-node properties: +- label: Name for this LED. If omitted, the label is taken from the node name. +- linux,default-trigger: Trigger assigned to the LED. + +Example: + +ns2-leds { + compatible = "lacie,ns2-leds"; + + blue-sata { + label = "ns2:blue:sata"; + slow-gpio = <&gpio0 29 0>; + cmd-gpio = <&gpio0 30 0>; + }; +}; diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt index 361bccb7ec8..95daf6335c3 100644 --- a/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt @@ -7,8 +7,10 @@ Required properties: - compatible: "marvell,88f6180-pinctrl", "marvell,88f6190-pinctrl", "marvell,88f6192-pinctrl", "marvell,88f6281-pinctrl", "marvell,88f6282-pinctrl" + "marvell,98dx4122-pinctrl" This driver supports all kirkwood variants, i.e. 88f6180, 88f619x, and 88f628x. +It also support the 88f6281-based variant in the 98dx412x Bobcat SoCs. Available mpp pins/groups and functions: Note: brackets (x) are not part of the mpp name for marvell,function and given @@ -277,3 +279,40 @@ mpp46 46 gpio, ts(mp10), tdm(fs), lcd(hsync) mpp47 47 gpio, ts(mp11), tdm(drx), lcd(vsync) mpp48 48 gpio, ts(mp12), tdm(dtx), lcd(d16) mpp49 49 gpo, tdm(rx0ql), pex(clkreq), lcd(d17) + +* Marvell Bobcat 98dx4122 + +name pins functions +================================================================================ +mpp0 0 gpio, nand(io2), spi(cs) +mpp1 1 gpo, nand(io3), spi(mosi) +mpp2 2 gpo, nand(io4), spi(sck) +mpp3 3 gpo, nand(io5), spi(miso) +mpp4 4 gpio, nand(io6), uart0(rxd) +mpp5 5 gpo, nand(io7), uart0(txd) +mpp6 6 sysrst(out), spi(mosi) +mpp7 7 gpo, pex(rsto), spi(cs) +mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts) +mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts) +mpp10 10 gpo, spi(sck), uart0(txd) +mpp11 11 gpio, spi(miso), uart0(rxd) +mpp13 13 gpio, uart1(txd) +mpp14 14 gpio, uart1(rxd) +mpp15 15 gpio, uart0(rts) +mpp16 16 gpio, uart0(cts) +mpp18 18 gpo, nand(io0) +mpp19 19 gpo, nand(io1) +mpp34 34 gpio +mpp35 35 gpio +mpp36 36 gpio +mpp37 37 gpio +mpp38 38 gpio +mpp39 39 gpio +mpp40 40 gpio +mpp41 41 gpio +mpp42 42 gpio +mpp43 43 gpio +mpp44 44 gpio +mpp45 45 gpio +mpp49 49 gpio + diff --git a/Documentation/devicetree/bindings/usb/ehci-orion.txt b/Documentation/devicetree/bindings/usb/ehci-orion.txt new file mode 100644 index 00000000000..6bc09ec14c4 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ehci-orion.txt @@ -0,0 +1,15 @@ +* EHCI controller, Orion Marvell variants + +Required properties: +- compatible: must be "marvell,orion-ehci" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: The EHCI interrupt + +Example: + + ehci@50000 { + compatible = "marvell,orion-ehci"; + reg = <0x50000 0x1000>; + interrupts = <19>; + }; diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index a1793d670cd..3844d21d6ca 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -33,7 +33,7 @@ Table of Contents 2 Modifying System Parameters 3 Per-Process Parameters - 3.1 /proc/<pid>/oom_score_adj - Adjust the oom-killer + 3.1 /proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj - Adjust the oom-killer score 3.2 /proc/<pid>/oom_score - Display current oom-killer score 3.3 /proc/<pid>/io - Display the IO accounting fields @@ -1320,10 +1320,10 @@ of the kernel. CHAPTER 3: PER-PROCESS PARAMETERS ------------------------------------------------------------------------------ -3.1 /proc/<pid>/oom_score_adj- Adjust the oom-killer score +3.1 /proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj- Adjust the oom-killer score -------------------------------------------------------------------------------- -This file can be used to adjust the badness heuristic used to select which +These file can be used to adjust the badness heuristic used to select which process gets killed in out of memory conditions. The badness heuristic assigns a value to each candidate task ranging from 0 @@ -1361,6 +1361,12 @@ same system, cpuset, mempolicy, or memory controller resources to use at least equivalent to discounting 50% of the task's allowed memory from being considered as scoring against the task. +For backwards compatibility with previous kernels, /proc/<pid>/oom_adj may also +be used to tune the badness score. Its acceptable values range from -16 +(OOM_ADJUST_MIN) to +15 (OOM_ADJUST_MAX) and a special value of -17 +(OOM_DISABLE) to disable oom killing entirely for that task. Its value is +scaled linearly with /proc/<pid>/oom_score_adj. + The value of /proc/<pid>/oom_score_adj may be reduced no lower than the last value set by a CAP_SYS_RESOURCE process. To reduce the value any lower requires CAP_SYS_RESOURCE. @@ -1375,7 +1381,9 @@ minimal amount of work. ------------------------------------------------------------- This file can be used to check the current score used by the oom-killer is for -any given <pid>. +any given <pid>. Use it together with /proc/<pid>/oom_score_adj to tune which +process should be killed in an out-of-memory situation. + 3.3 /proc/<pid>/io - Display the IO accounting fields ------------------------------------------------------- diff --git a/Documentation/networking/netdev-features.txt b/Documentation/networking/netdev-features.txt index 4164f5c02e4..f310edec8a7 100644 --- a/Documentation/networking/netdev-features.txt +++ b/Documentation/networking/netdev-features.txt @@ -164,4 +164,4 @@ read the CRC recorded by the NIC on receipt of the packet. This requests that the NIC receive all possible frames, including errored frames (such as bad FCS, etc). This can be helpful when sniffing a link with bad packets on it. Some NICs may receive more packets if also put into normal -PROMISC mdoe. +PROMISC mode. diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt index 3b4ee532886..a1cd2f9428d 100644 --- a/Documentation/pinctrl.txt +++ b/Documentation/pinctrl.txt @@ -1193,4 +1193,6 @@ foo_switch() ... } -The above has to be done from process context. +The above has to be done from process context. The reservation of the pins +will be done when the state is activated, so in effect one specific pin +can be used by different functions at different times on a running system. diff --git a/MAINTAINERS b/MAINTAINERS index 99199e63f34..f77a903fd1c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3597,6 +3597,49 @@ F: drivers/hid/hid-hyperv.c F: drivers/net/hyperv/ F: drivers/staging/hv/ +I2C OVER PARALLEL PORT +M: Jean Delvare <khali@linux-fr.org> +L: linux-i2c@vger.kernel.org +S: Maintained +F: Documentation/i2c/busses/i2c-parport +F: Documentation/i2c/busses/i2c-parport-light +F: drivers/i2c/busses/i2c-parport.c +F: drivers/i2c/busses/i2c-parport-light.c + +I2C/SMBUS CONTROLLER DRIVERS FOR PC +M: Jean Delvare <khali@linux-fr.org> +L: linux-i2c@vger.kernel.org +S: Maintained +F: Documentation/i2c/busses/i2c-ali1535 +F: Documentation/i2c/busses/i2c-ali1563 +F: Documentation/i2c/busses/i2c-ali15x3 +F: Documentation/i2c/busses/i2c-amd756 +F: Documentation/i2c/busses/i2c-amd8111 +F: Documentation/i2c/busses/i2c-i801 +F: Documentation/i2c/busses/i2c-nforce2 +F: Documentation/i2c/busses/i2c-piix4 +F: Documentation/i2c/busses/i2c-sis5595 +F: Documentation/i2c/busses/i2c-sis630 +F: Documentation/i2c/busses/i2c-sis96x +F: Documentation/i2c/busses/i2c-via +F: Documentation/i2c/busses/i2c-viapro +F: drivers/i2c/busses/i2c-ali1535.c +F: drivers/i2c/busses/i2c-ali1563.c +F: drivers/i2c/busses/i2c-ali15x3.c +F: drivers/i2c/busses/i2c-amd756.c +F: drivers/i2c/busses/i2c-amd756-s4882.c +F: drivers/i2c/busses/i2c-amd8111.c +F: drivers/i2c/busses/i2c-i801.c +F: drivers/i2c/busses/i2c-isch.c +F: drivers/i2c/busses/i2c-nforce2.c +F: drivers/i2c/busses/i2c-nforce2-s4985.c +F: drivers/i2c/busses/i2c-piix4.c +F: drivers/i2c/busses/i2c-sis5595.c +F: drivers/i2c/busses/i2c-sis630.c +F: drivers/i2c/busses/i2c-sis96x.c +F: drivers/i2c/busses/i2c-via.c +F: drivers/i2c/busses/i2c-viapro.c + I2C/SMBUS STUB DRIVER M: "Mark M. Hoffman" <mhoffman@lightlink.com> L: linux-i2c@vger.kernel.org @@ -3604,9 +3647,8 @@ S: Maintained F: drivers/i2c/busses/i2c-stub.c I2C SUBSYSTEM -M: "Jean Delvare (PC drivers, core)" <khali@linux-fr.org> +M: Wolfram Sang <w.sang@pengutronix.de> M: "Ben Dooks (embedded platforms)" <ben-linux@fluff.org> -M: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de> L: linux-i2c@vger.kernel.org W: http://i2c.wiki.kernel.org/ T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/ @@ -3617,6 +3659,13 @@ F: drivers/i2c/ F: include/linux/i2c.h F: include/linux/i2c-*.h +I2C-TAOS-EVM DRIVER +M: Jean Delvare <khali@linux-fr.org> +L: linux-i2c@vger.kernel.org +S: Maintained +F: Documentation/i2c/busses/i2c-taos-evm +F: drivers/i2c/busses/i2c-taos-evm.c + I2C-TINY-USB DRIVER M: Till Harbaum <till@harbaum.org> L: linux-i2c@vger.kernel.org @@ -7209,6 +7258,14 @@ L: linux-xtensa@linux-xtensa.org S: Maintained F: arch/xtensa/ +THERMAL +M: Zhang Rui <rui.zhang@intel.com> +L: linux-pm@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git +S: Supported +F: drivers/thermal/ +F: include/linux/thermal.h + THINKPAD ACPI EXTRAS DRIVER M: Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br> L: ibm-acpi-devel@lists.sourceforge.net @@ -7886,13 +7943,6 @@ M: Roger Luethi <rl@hellgate.ch> S: Maintained F: drivers/net/ethernet/via/via-rhine.c -VIAPRO SMBUS DRIVER -M: Jean Delvare <khali@linux-fr.org> -L: linux-i2c@vger.kernel.org -S: Maintained -F: Documentation/i2c/busses/i2c-viapro -F: drivers/i2c/busses/i2c-viapro.c - VIA SD/MMC CARD CONTROLLER DRIVER M: Bruce Chang <brucechang@via.com.tw> M: Harald Welte <HaraldWelte@viatech.com> @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 7 SUBLEVEL = 0 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc6 NAME = Terrified Chipmunk # *DOCUMENTATION* diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index dbbe74c10b1..f88fce5e977 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -523,6 +523,8 @@ config ARCH_DOVE select CPU_V7 select GENERIC_CLOCKEVENTS select MIGHT_HAVE_PCI + select PINCTRL + select PINCTRL_DOVE select PLAT_ORION_LEGACY select USB_ARCH_HAS_EHCI help @@ -534,6 +536,8 @@ config ARCH_KIRKWOOD select CPU_FEROCEON select GENERIC_CLOCKEVENTS select PCI + select PINCTRL + select PINCTRL_KIRKWOOD select PLAT_ORION_LEGACY help Support for the following Marvell Kirkwood series SoCs: diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index f2aa09eb658..9137df539b6 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -33,7 +33,7 @@ ifeq ($(CONFIG_XIP_KERNEL),y) $(obj)/xipImage: vmlinux FORCE $(call if_changed,objcopy) - $(kecho) ' Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))' + @$(kecho) ' Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))' $(obj)/Image $(obj)/zImage: FORCE @echo 'Kernel configured for XIP (CONFIG_XIP_KERNEL=y)' @@ -48,14 +48,14 @@ $(obj)/xipImage: FORCE $(obj)/Image: vmlinux FORCE $(call if_changed,objcopy) - $(kecho) ' Kernel: $@ is ready' + @$(kecho) ' Kernel: $@ is ready' $(obj)/compressed/vmlinux: $(obj)/Image FORCE $(Q)$(MAKE) $(build)=$(obj)/compressed $@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE $(call if_changed,objcopy) - $(kecho) ' Kernel: $@ is ready' + @$(kecho) ' Kernel: $@ is ready' endif @@ -90,7 +90,7 @@ fi $(obj)/uImage: $(obj)/zImage FORCE @$(check_for_multiple_loadaddr) $(call if_changed,uimage) - $(kecho) ' Image $@ is ready' + @$(kecho) ' Image $@ is ready' $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE $(Q)$(MAKE) $(build)=$(obj)/bootp $@ @@ -98,7 +98,7 @@ $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE $(obj)/bootpImage: $(obj)/bootp/bootp FORCE $(call if_changed,objcopy) - $(kecho) ' Kernel: $@ is ready' + @$(kecho) ' Kernel: $@ is ready' PHONY += initrd FORCE initrd: diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index a31211904e9..d9cf7340572 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -40,11 +40,20 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \ kirkwood-ib62x0.dtb \ kirkwood-iconnect.dtb \ kirkwood-iomega_ix2_200.dtb \ + kirkwood-is2.dtb \ kirkwood-km_kirkwood.dtb \ kirkwood-lschlv2.dtb \ kirkwood-lsxhl.dtb \ + kirkwood-mplcec4.dtb \ + kirkwood-ns2.dtb \ + kirkwood-ns2lite.dtb \ + kirkwood-ns2max.dtb \ + kirkwood-ns2mini.dtb \ + kirkwood-nsa310.dtb \ + kirkwood-topkick.dtb \ kirkwood-ts219-6281.dtb \ - kirkwood-ts219-6282.dtb + kirkwood-ts219-6282.dtb \ + kirkwood-openblocks_a6.dtb dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \ msm8960-cdp.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ @@ -83,6 +92,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ am335x-evm.dtb \ am335x-evmsk.dtb \ am335x-bone.dtb +dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_U8500) += snowball.dtb dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts index 0adbd5a3809..fed7d3f9f43 100644 --- a/arch/arm/boot/dts/dove-cubox.dts +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -40,3 +40,13 @@ reg = <0>; }; }; + +&pinctrl { + pinctrl-0 = <&pmx_gpio_18>; + pinctrl-names = "default"; + + pmx_gpio_18: pmx-gpio-18 { + marvell,pins = "mpp18"; + marvell,function = "gpio"; + }; +}; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 5a00022383e..61f391412a5 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -4,6 +4,12 @@ compatible = "marvell,dove"; model = "Marvell Armada 88AP510 SoC"; + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + }; + soc@f1000000 { compatible = "simple-bus"; #address-cells = <1>; @@ -72,7 +78,8 @@ #gpio-cells = <2>; gpio-controller; reg = <0xd0400 0x20>; - ngpio = <32>; + ngpios = <32>; + interrupt-controller; interrupts = <12>, <13>, <14>, <60>; }; @@ -81,7 +88,8 @@ #gpio-cells = <2>; gpio-controller; reg = <0xd0420 0x20>; - ngpio = <32>; + ngpios = <32>; + interrupt-controller; interrupts = <61>; }; @@ -90,7 +98,12 @@ #gpio-cells = <2>; gpio-controller; reg = <0xe8400 0x0c>; - ngpio = <8>; + ngpios = <8>; + }; + + pinctrl: pinctrl@d0200 { + compatible = "marvell,dove-pinctrl"; + reg = <0xd0200 0x10>; }; spi0: spi@10600 { diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi new file mode 100644 index 00000000000..d6c9d65cbae --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-6281.dtsi @@ -0,0 +1,44 @@ +/ { + ocp@f1000000 { + pinctrl: pinctrl@10000 { + compatible = "marvell,88f6281-pinctrl"; + reg = <0x10000 0x20>; + + pmx_nand: pmx-nand { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", + "mpp4", "mpp5", "mpp18", + "mpp19"; + marvell,function = "nand"; + }; + pmx_sata0: pmx-sata0 { + marvell,pins = "mpp5", "mpp21", "mpp23"; + marvell,function = "sata0"; + }; + pmx_sata1: pmx-sata1 { + marvell,pins = "mpp4", "mpp20", "mpp22"; + marvell,function = "sata1"; + }; + pmx_spi: pmx-spi { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; + marvell,function = "spi"; + }; + pmx_twsi0: pmx-twsi0 { + marvell,pins = "mpp8", "mpp9"; + marvell,function = "twsi0"; + }; + pmx_uart0: pmx-uart0 { + marvell,pins = "mpp10", "mpp11"; + marvell,function = "uart0"; + }; + pmx_uart1: pmx-uart1 { + marvell,pins = "mpp13", "mpp14"; + marvell,function = "uart1"; + }; + pmx_sdio: pmx-sdio { + marvell,pins = "mpp12", "mpp13", "mpp14", + "mpp15", "mpp16", "mpp17"; + marvell,function = "sdio"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi new file mode 100644 index 00000000000..9ae2004d567 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi @@ -0,0 +1,45 @@ +/ { + ocp@f1000000 { + + pinctrl: pinctrl@10000 { + compatible = "marvell,88f6282-pinctrl"; + reg = <0x10000 0x20>; + + pmx_sata0: pmx-sata0 { + marvell,pins = "mpp5", "mpp21", "mpp23"; + marvell,function = "sata0"; + }; + pmx_sata1: pmx-sata1 { + marvell,pins = "mpp4", "mpp20", "mpp22"; + marvell,function = "sata1"; + }; + pmx_spi: pmx-spi { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; + marvell,function = "spi"; + }; + pmx_twsi0: pmx-twsi0 { + marvell,pins = "mpp8", "mpp9"; + marvell,function = "twsi0"; + }; + pmx_uart0: pmx-uart0 { + marvell,pins = "mpp10", "mpp11"; + marvell,function = "uart0"; + }; + + pmx_uart1: pmx-uart1 { + marvell,pins = "mpp13", "mpp14"; + marvell,function = "uart1"; + }; + }; + + i2c@11100 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11100 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <32>; + clock-frequency = <100000>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi new file mode 100644 index 00000000000..3271e4c8ea0 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi @@ -0,0 +1,31 @@ +/ { + ocp@f1000000 { + pinctrl: pinctrl@10000 { + compatible = "marvell,98dx4122-pinctrl"; + reg = <0x10000 0x20>; + + pmx_nand: pmx-nand { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", + "mpp4", "mpp5", "mpp18", + "mpp19"; + marvell,function = "nand"; + }; + pmx_spi: pmx-spi { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; + marvell,function = "spi"; + }; + pmx_twsi0: pmx-twsi0 { + marvell,pins = "mpp8", "mpp9"; + marvell,function = "twsi0"; + }; + pmx_uart0: pmx-uart0 { + marvell,pins = "mpp10", "mpp11"; + marvell,function = "uart0"; + }; + pmx_uart1: pmx-uart1 { + marvell,pins = "mpp13", "mpp14"; + marvell,function = "uart1"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi index 9b32d027282..6875ac00c17 100644 --- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi +++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi @@ -1,4 +1,5 @@ /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { model = "D-Link DNS NASes (kirkwood-based)"; @@ -35,7 +36,116 @@ 6000 2>; }; + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio1 4 0>; + }; + ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_nand &pmx_uart1 + &pmx_sata0 &pmx_sata1 + &pmx_led_power + &pmx_led_red_right_hdd + &pmx_led_red_left_hdd + &pmx_led_red_usb_325 + &pmx_button_power + &pmx_led_red_usb_320 + &pmx_power_off &pmx_power_back_on + &pmx_power_sata0 &pmx_power_sata1 + &pmx_present_sata0 &pmx_present_sata1 + &pmx_led_white_usb &pmx_fan_tacho + &pmx_fan_high_speed &pmx_fan_low_speed + &pmx_button_unmount &pmx_button_reset + &pmx_temp_alarm >; + pinctrl-names = "default"; + + pmx_sata0: pmx-sata0 { + marvell,pins = "mpp20"; + marvell,function = "sata1"; + }; + pmx_sata1: pmx-sata1 { + marvell,pins = "mpp21"; + marvell,function = "sata0"; + }; + pmx_led_power: pmx-led-power { + marvell,pins = "mpp26"; + marvell,function = "gpio"; + }; + pmx_led_red_right_hdd: pmx-led-red-right-hdd { + marvell,pins = "mpp27"; + marvell,function = "gpio"; + }; + pmx_led_red_left_hdd: pmx-led-red-left-hdd { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + pmx_led_red_usb_325: pmx-led-red-usb-325 { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + pmx_button_power: pmx-button-power { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + pmx_led_red_usb_320: pmx-led-red-usb-320 { + marvell,pins = "mpp35"; + marvell,function = "gpio"; + }; + pmx_power_off: pmx-power-off { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + pmx_power_back_on: pmx-power-back-on { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + pmx_power_sata0: pmx-power-sata0 { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + pmx_power_sata1: pmx-power-sata1 { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + pmx_present_sata0: pmx-present-sata0 { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + pmx_present_sata1: pmx-present-sata1 { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + pmx_led_white_usb: pmx-led-white-usb { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pmx_fan_tacho: pmx-fan-tacho { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + pmx_fan_high_speed: pmx-fan-high-speed { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + pmx_fan_low_speed: pmx-fan-low-speed { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + pmx_button_unmount: pmx-button-unmount { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + pmx_button_reset: pmx-button-reset { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + pmx_temp_alarm: pmx-temp-alarm { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; + }; sata@80000 { status = "okay"; nr-ports = <2>; @@ -43,6 +153,7 @@ nand@3000000 { status = "okay"; + chip-delay = <35>; partition@0 { label = "u-boot"; @@ -76,4 +187,33 @@ }; }; }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + sata0_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "SATA0 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 7 0>; + }; + sata1_power: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "SATA1 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 8 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts index 08a582414b8..2e3dd34e21a 100644 --- a/arch/arm/boot/dts/kirkwood-dockstar.dts +++ b/arch/arm/boot/dts/kirkwood-dockstar.dts @@ -1,6 +1,7 @@ /dts-v1/; /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { model = "Seagate FreeAgent Dockstar"; @@ -16,6 +17,25 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_usb_power_enable + &pmx_led_green &pmx_led_orange >; + pinctrl-names = "default"; + + pmx_usb_power_enable: pmx-usb-power-enable { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + pmx_led_green: pmx-led-green { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + pmx_led_orange: pmx-led-orange { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + }; serial@12000 { clock-frequency = <200000000>; status = "ok"; @@ -54,4 +74,21 @@ gpios = <&gpio1 15 1>; }; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 29 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index 26e281fbf6b..f2d386c95b0 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -1,6 +1,7 @@ /dts-v1/; /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { model = "Globalscale Technologies Dreamplug"; @@ -16,6 +17,26 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_spi + &pmx_led_bluetooth &pmx_led_wifi + &pmx_led_wifi_ap >; + pinctrl-names = "default"; + + pmx_led_bluetooth: pmx-led-bluetooth { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + pmx_led_wifi: pmx-led-wifi { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + pmx_led_wifi_ap: pmx-led-wifi-ap { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; + }; serial@12000 { clock-frequency = <200000000>; status = "ok"; diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts index 7c8238fbb6f..1b133e0c566 100644 --- a/arch/arm/boot/dts/kirkwood-goflexnet.dts +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -1,6 +1,7 @@ /dts-v1/; /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { model = "Seagate GoFlex Net"; @@ -16,6 +17,61 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange + &pmx_led_left_cap_0 &pmx_led_left_cap_1 + &pmx_led_left_cap_2 &pmx_led_left_cap_3 + &pmx_led_right_cap_0 &pmx_led_right_cap_1 + &pmx_led_right_cap_2 &pmx_led_right_cap_3 + >; + pinctrl-names = "default"; + + pmx_usb_power_enable: pmx-usb-power-enable { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + pmx_led_right_cap_0: pmx-led_right_cap_0 { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + pmx_led_right_cap_1: pmx-led_right_cap_1 { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + pmx_led_right_cap_2: pmx-led_right_cap_2 { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + pmx_led_right_cap_3: pmx-led_right_cap_3 { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + pmx_led_left_cap_0: pmx-led_left_cap_0 { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + pmx_led_left_cap_1: pmx-led_left_cap_1 { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pmx_led_left_cap_2: pmx-led_left_cap_2 { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + pmx_led_left_cap_3: pmx-led_left_cap_3 { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + pmx_led_green: pmx-led_green { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + pmx_led_orange: pmx-led_orange { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + }; serial@12000 { clock-frequency = <200000000>; status = "ok"; @@ -96,4 +152,21 @@ gpios = <&gpio1 9 0>; }; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 29 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index 66794ed75ff..71902da33d6 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -1,6 +1,7 @@ /dts-v1/; /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)"; @@ -16,6 +17,39 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_nand + &pmx_led_os_red &pmx_power_off + &pmx_led_os_green &pmx_led_usb_transfer + &pmx_button_reset &pmx_button_usb_copy >; + pinctrl-names = "default"; + + pmx_led_os_red: pmx-led-os-red { + marvell,pins = "mpp22"; + marvell,function = "gpio"; + }; + pmx_power_off: pmx-power-off { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; + pmx_led_os_green: pmx-led-os-green { + marvell,pins = "mpp25"; + marvell,function = "gpio"; + }; + pmx_led_usb_transfer: pmx-led-usb-transfer { + marvell,pins = "mpp27"; + marvell,function = "gpio"; + }; + pmx_button_reset: pmx-button-reset { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + pmx_button_usb_copy: pmx-button-usb-copy { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + }; serial@12000 { clock-frequency = <200000000>; status = "okay"; @@ -79,4 +113,10 @@ gpios = <&gpio0 27 0>; }; }; + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 24 0>; + }; + + }; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index d97cd9d4753..504f16be8b5 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -1,6 +1,7 @@ /dts-v1/; /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { model = "Iomega Iconnect"; @@ -18,6 +19,56 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_gpio_12 &pmx_gpio_35 + &pmx_gpio_41 &pmx_gpio_42 + &pmx_gpio_43 &pmx_gpio_44 + &pmx_gpio_45 &pmx_gpio_46 + &pmx_gpio_47 &pmx_gpio_48 >; + pinctrl-names = "default"; + + pmx_gpio_12: pmx-gpio-12 { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + pmx_gpio_35: pmx-gpio-35 { + marvell,pins = "mpp35"; + marvell,function = "gpio"; + }; + pmx_gpio_41: pmx-gpio-41 { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + pmx_gpio_42: pmx-gpio-42 { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + pmx_gpio_43: pmx-gpio-43 { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pmx_gpio_44: pmx-gpio-44 { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + pmx_gpio_45: pmx-gpio-45 { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + pmx_gpio_46: pmx-gpio-46 { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + pmx_gpio_47: pmx-gpio-47 { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + pmx_gpio_48: pmx-gpio-48 { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + }; i2c@11000 { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts index 865aeec40a2..6cae4599c4b 100644 --- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts @@ -1,6 +1,7 @@ /dts-v1/; /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { model = "Iomega StorCenter ix2-200"; @@ -16,6 +17,94 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_button_reset &pmx_button_power + &pmx_led_backup &pmx_led_power + &pmx_button_otb &pmx_led_rebuild + &pmx_led_health + &pmx_led_sata_brt_ctrl_1 + &pmx_led_sata_brt_ctrl_2 + &pmx_led_backup_brt_ctrl_1 + &pmx_led_backup_brt_ctrl_2 + &pmx_led_power_brt_ctrl_1 + &pmx_led_power_brt_ctrl_2 + &pmx_led_health_brt_ctrl_1 + &pmx_led_health_brt_ctrl_2 + &pmx_led_rebuild_brt_ctrl_1 + &pmx_led_rebuild_brt_ctrl_2 >; + pinctrl-names = "default"; + + pmx_button_reset: pmx-button-reset { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + pmx_button_power: pmx-button-power { + marvell,pins = "mpp14"; + marvell,function = "gpio"; + }; + pmx_led_backup: pmx-led-backup { + marvell,pins = "mpp15"; + marvell,function = "gpio"; + }; + pmx_led_power: pmx-led-power { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + pmx_button_otb: pmx-button-otb { + marvell,pins = "mpp35"; + marvell,function = "gpio"; + }; + pmx_led_rebuild: pmx-led-rebuild { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + pmx_led_health: pmx-led_health { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + pmx_led_sata_brt_ctrl_1: pmx-led-sata-brt-ctrl-1 { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + pmx_led_sata_brt_ctrl_2: pmx-led-sata-brt-ctrl-2 { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + pmx_led_backup_brt_ctrl_1: pmx-led-backup-brt-ctrl-1 { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + pmx_led_backup_brt_ctrl_2: pmx-led-backup-brt-ctrl-2 { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + pmx_led_power_brt_ctrl_1: pmx-led-power-brt-ctrl-1 { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + pmx_led_power_brt_ctrl_2: pmx-led-power-brt-ctrl-2 { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pmx_led_health_brt_ctrl_1: pmx-led-health-brt-ctrl-1 { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + pmx_led_health_brt_ctrl_2: pmx-led-health-brt-ctrl-2 { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + pmx_led_rebuild_brt_ctrl_1: pmx-led-rebuild-brt-ctrl-1 { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + pmx_led_rebuild_brt_ctrl_2: pmx-led-rebuild-brt-ctrl-2 { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + + }; i2c@11000 { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-is2.dts b/arch/arm/boot/dts/kirkwood-is2.dts new file mode 100644 index 00000000000..0bdce0ad727 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-is2.dts @@ -0,0 +1,30 @@ +/dts-v1/; + +/include/ "kirkwood-ns2-common.dtsi" + +/ { + model = "LaCie Internet Space v2"; + compatible = "lacie,inetspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + }; + + ns2-leds { + compatible = "lacie,ns2-leds"; + + blue-sata { + label = "ns2:blue:sata"; + slow-gpio = <&gpio0 29 0>; + cmd-gpio = <&gpio0 30 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts index 75bdb93fed2..8db3123ac80 100644 --- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts +++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts @@ -1,6 +1,7 @@ /dts-v1/; /include/ "kirkwood.dtsi" +/include/ "kirkwood-98dx4122.dtsi" / { model = "Keymile Kirkwood Reference Design"; @@ -16,6 +17,22 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_nand &pmx_i2c_gpio_sda + &pmx_i2c_gpio_scl >; + pinctrl-names = "default"; + + pmx_i2c_gpio_sda: pmx-gpio-sda { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; + pmx_i2c_gpio_scl: pmx-gpio-scl { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; + }; + serial@12000 { clock-frequency = <200000000>; status = "ok"; diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 8fea375c734..37d45c4f88f 100644 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -1,4 +1,5 @@ /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { chosen { @@ -6,6 +7,71 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_power_hdd &pmx_usb_vbus + &pmx_fan_low &pmx_fan_high + &pmx_led_function_red &pmx_led_alarm + &pmx_led_info &pmx_led_power + &pmx_fan_lock &pmx_button_function + &pmx_power_switch &pmx_power_auto_switch + &pmx_led_function_blue >; + pinctrl-names = "default"; + + pmx_power_hdd: pmx-power-hdd { + marvell,pins = "mpp10"; + marvell,function = "gpo"; + }; + pmx_usb_vbus: pmx-usb-vbus { + marvell,pins = "mpp11"; + marvell,function = "gpio"; + }; + pmx_fan_high: pmx-fan-high { + marvell,pins = "mpp18"; + marvell,function = "gpo"; + }; + pmx_fan_low: pmx-fan-low { + marvell,pins = "mpp19"; + marvell,function = "gpo"; + }; + pmx_led_function_blue: pmx-led-function-blue { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + pmx_led_alarm: pmx-led-alarm { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + pmx_led_info: pmx-led-info { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + pmx_led_power: pmx-led-power { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + pmx_fan_lock: pmx-fan-lock { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + pmx_button_function: pmx-button-function { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + pmx_power_switch: pmx-power-switch { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + pmx_power_auto_switch: pmx-power-auto-switch { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pmx_led_function_red: pmx-led-function_red { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + + }; sata@80000 { status = "okay"; nr-ports = <1>; @@ -94,4 +160,44 @@ gpios = <&gpio1 16 1>; }; }; + + gpio_fan { + compatible = "gpio-fan"; + gpios = <&gpio0 19 1 + &gpio0 18 1>; + gpio-fan,speed-map = <0 3 + 1500 2 + 3250 1 + 5000 0>; + alarm-gpios = <&gpio1 8 0>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 11 0>; + }; + hdd_power: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "HDD Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 10 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts new file mode 100644 index 00000000000..262c6540376 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts @@ -0,0 +1,178 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" + +/ { + model = "MPL CEC4"; + compatible = "mpl,cec4-10", "mpl,cec4", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_nand &pmx_uart0 + &pmx_led_health &pmx_sdio + &pmx_sata0 &pmx_sata1 + &pmx_led_user1o + &pmx_led_user1g &pmx_led_user0o + &pmx_led_user0g &pmx_led_misc + &pmx_sdio_cd + >; + pinctrl-names = "default"; + + pmx_led_health: pmx-led-health { + marvell,pins = "mpp7"; + marvell,function = "gpo"; + }; + + pmx_sata1: pmx-sata1 { + marvell,pins = "mpp34"; + marvell,function = "sata1"; + }; + + pmx_sata0: pmx-sata0 { + marvell,pins = "mpp35"; + marvell,function = "sata0"; + }; + + pmx_led_user1o: pmx-led-user1o { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + + pmx_led_user1g: pmx-led-user1g { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + + pmx_led_user0o: pmx-led-user0o { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + + pmx_led_user0g: pmx-led-user0g { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + + pmx_led_misc: pmx-led-misc { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + + pmx_sdio_cd: pmx-sdio-cd { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + }; + + i2c@11000 { + status = "okay"; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + }; + + }; + + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "uboot"; + reg = <0x0000000 0x100000>; + }; + + partition@100000 { + label = "env"; + reg = <0x100000 0x80000>; + }; + + partition@180000 { + label = "fdt"; + reg = <0x180000 0x80000>; + }; + + partition@200000 { + label = "kernel"; + reg = <0x200000 0x400000>; + }; + + partition@600000 { + label = "rootfs"; + reg = <0x600000 0x1fa00000>; + }; + }; + + rtc@10300 { + status = "disabled"; + }; + + sata@80000 { + nr-ports = <2>; + status = "okay"; + + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + health { + label = "status:green:health"; + gpios = <&gpio0 7 1>; + }; + + user1o { + label = "user1:orange"; + gpios = <&gpio1 8 1>; + default-state = "on"; + }; + + user1g { + label = "user1:green"; + gpios = <&gpio1 9 1>; + default-state = "on"; + }; + + user0o { + label = "user0:orange"; + gpios = <&gpio1 12 1>; + default-state = "on"; + }; + + user0g { + label = "user0:green"; + gpios = <&gpio1 13 1>; + default-state = "on"; + }; + + misc { + label = "status:orange:misc"; + gpios = <&gpio1 14 1>; + default-state = "on"; + }; + + }; +}; + diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi new file mode 100644 index 00000000000..9bc6785ad22 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -0,0 +1,63 @@ +/include/ "kirkwood.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <166666667>; + status = "okay"; + }; + + spi@10600 { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l4005a"; + reg = <0>; + spi-max-frequency = <20000000>; + mode = <0>; + + partition@0 { + reg = <0x0 0x80000>; + label = "u-boot"; + }; + }; + }; + + i2c@11000 { + status = "okay"; + + eeprom@50 { + compatible = "at,24c04"; + pagesize = <16>; + reg = <0x50>; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "Power push button"; + linux,code = <116>; + gpios = <&gpio1 0 0>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + red-fail { + label = "ns2:red:fail"; + gpios = <&gpio0 12 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ns2.dts b/arch/arm/boot/dts/kirkwood-ns2.dts new file mode 100644 index 00000000000..f2d36ecf36d --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ns2.dts @@ -0,0 +1,30 @@ +/dts-v1/; + +/include/ "kirkwood-ns2-common.dtsi" + +/ { + model = "LaCie Network Space v2"; + compatible = "lacie,netspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + }; + + ns2-leds { + compatible = "lacie,ns2-leds"; + + blue-sata { + label = "ns2:blue:sata"; + slow-gpio = <&gpio0 29 0>; + cmd-gpio = <&gpio0 30 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ns2lite.dts b/arch/arm/boot/dts/kirkwood-ns2lite.dts new file mode 100644 index 00000000000..b02eb4ea1bb --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ns2lite.dts @@ -0,0 +1,30 @@ +/dts-v1/; + +/include/ "kirkwood-ns2-common.dtsi" + +/ { + model = "LaCie Network Space Lite v2"; + compatible = "lacie,netspace_lite_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + blue-sata { + label = "ns2:blue:sata"; + gpios = <&gpio0 30 1>; + linux,default-trigger = "default-on"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ns2max.dts b/arch/arm/boot/dts/kirkwood-ns2max.dts new file mode 100644 index 00000000000..bcec4d6cada --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ns2max.dts @@ -0,0 +1,49 @@ +/dts-v1/; + +/include/ "kirkwood-ns2-common.dtsi" + +/ { + model = "LaCie Network Space Max v2"; + compatible = "lacie,netspace_max_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + }; + + gpio_fan { + compatible = "gpio-fan"; + gpios = <&gpio0 22 1 + &gpio0 7 1 + &gpio1 1 1 + &gpio0 23 1>; + gpio-fan,speed-map = + < 0 0 + 1500 15 + 1700 14 + 1800 13 + 2100 12 + 3100 11 + 3300 10 + 4300 9 + 5500 8>; + alarm-gpios = <&gpio0 25 1>; + }; + + ns2-leds { + compatible = "lacie,ns2-leds"; + + blue-sata { + label = "ns2:blue:sata"; + slow-gpio = <&gpio0 29 0>; + cmd-gpio = <&gpio0 30 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts new file mode 100644 index 00000000000..b79f5eb2558 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts @@ -0,0 +1,49 @@ +/dts-v1/; + +/include/ "kirkwood-ns2-common.dtsi" + +/ { + model = "LaCie Network Space Mini v2"; + compatible = "lacie,netspace_mini_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + }; + + gpio_fan { + compatible = "gpio-fan"; + gpios = <&gpio0 22 1 + &gpio0 7 1 + &gpio1 1 1 + &gpio0 23 1>; + gpio-fan,speed-map = + < 0 0 + 3000 15 + 3180 14 + 4140 13 + 4570 12 + 6760 11 + 7140 10 + 7980 9 + 9200 8>; + alarm-gpios = <&gpio0 25 1>; + }; + + ns2-leds { + compatible = "lacie,ns2-leds"; + + blue-sata { + label = "ns2:blue:sata"; + slow-gpio = <&gpio0 29 0>; + cmd-gpio = <&gpio0 30 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts new file mode 100644 index 00000000000..5509f965954 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-nsa310.dts @@ -0,0 +1,144 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "ZyXEL NSA310"; + compatible = "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + ocp@f1000000 { + + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + i2c@11000 { + status = "okay"; + }; + + nand@3000000 { + status = "okay"; + chip-delay = <35>; + + partition@0 { + label = "uboot"; + reg = <0x0000000 0x0100000>; + read-only; + }; + partition@100000 { + label = "uboot_env"; + reg = <0x0100000 0x0080000>; + }; + partition@180000 { + label = "key_store"; + reg = <0x0180000 0x0080000>; + }; + partition@200000 { + label = "info"; + reg = <0x0200000 0x0080000>; + }; + partition@280000 { + label = "etc"; + reg = <0x0280000 0x0a00000>; + }; + partition@c80000 { + label = "kernel_1"; + reg = <0x0c80000 0x0a00000>; + }; + partition@1680000 { + label = "rootfs1"; + reg = <0x1680000 0x2fc0000>; + }; + partition@4640000 { + label = "kernel_2"; + reg = <0x4640000 0x0a00000>; + }; + partition@5040000 { + label = "rootfs2"; + reg = <0x5040000 0x2fc0000>; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "Power Button"; + linux,code = <116>; + gpios = <&gpio1 14 0>; + }; + button@2 { + label = "Copy Button"; + linux,code = <133>; + gpios = <&gpio1 5 1>; + }; + button@3 { + label = "Reset Button"; + linux,code = <0x198>; + gpios = <&gpio1 4 1>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + green-sys { + label = "nsa310:green:sys"; + gpios = <&gpio0 28 0>; + }; + red-sys { + label = "nsa310:red:sys"; + gpios = <&gpio0 29 0>; + }; + green-hdd { + label = "nsa310:green:hdd"; + gpios = <&gpio1 9 0>; + }; + red-hdd { + label = "nsa310:red:hdd"; + gpios = <&gpio1 10 0>; + }; + green-esata { + label = "nsa310:green:esata"; + gpios = <&gpio0 12 0>; + }; + red-esata { + label = "nsa310:red:esata"; + gpios = <&gpio0 13 0>; + }; + green-usb { + label = "nsa310:green:usb"; + gpios = <&gpio0 15 0>; + }; + red-usb { + label = "nsa310:red:usb"; + gpios = <&gpio0 16 0>; + }; + green-copy { + label = "nsa310:green:copy"; + gpios = <&gpio1 7 0>; + }; + red-copy { + label = "nsa310:red:copy"; + gpios = <&gpio1 8 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts new file mode 100644 index 00000000000..49d3d74d4d3 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts @@ -0,0 +1,98 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" +/include/ "kirkwood-6282.dtsi" + +/ { + model = "Plat'Home OpenBlocksA6"; + compatible = "plathome,openblocks-a6", "marvell,kirkwood-88f6283", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + serial@12100 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + chip-delay = <25>; + status = "okay"; + + partition@0 { + label = "uboot"; + reg = <0x0 0x90000>; + }; + + partition@90000 { + label = "env"; + reg = <0x90000 0x44000>; + }; + + partition@d4000 { + label = "test"; + reg = <0xd4000 0x24000>; + }; + + partition@f4000 { + label = "conf"; + reg = <0xf4000 0x400000>; + }; + + partition@4f4000 { + label = "linux"; + reg = <0x4f4000 0x1d20000>; + }; + + partition@2214000 { + label = "user"; + reg = <0x2214000 0x1dec000>; + }; + }; + + sata@80000 { + nr-ports = <1>; + status = "okay"; + }; + + i2c@11100 { + status = "okay"; + + s35390a: s35390a@30 { + compatible = "s35390a"; + reg = <0x30>; + }; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led-red { + label = "obsa6:red:stat"; + gpios = <&gpio1 9 1>; + }; + + led-green { + label = "obsa6:green:stat"; + gpios = <&gpio1 10 1>; + }; + + led-yellow { + label = "obsa6:yellow:stat"; + gpios = <&gpio1 11 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts new file mode 100644 index 00000000000..c0de5a7f660 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-topkick.dts @@ -0,0 +1,85 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "Univeral Scientific Industrial Co. Topkick-1281P2"; + compatible = "usi,topkick-1281P2", "usi,topkick", "marvell,kirkwood-88f6282", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x180000>; + }; + + partition@180000 { + label = "u-boot env"; + reg = <0x0180000 0x20000>; + }; + + partition@200000 { + label = "uImage"; + reg = <0x0200000 0x600000>; + }; + + partition@800000 { + label = "uInitrd"; + reg = <0x0800000 0x1000000>; + }; + + partition@1800000 { + label = "rootfs"; + reg = <0x1800000 0xe800000>; + }; + }; + + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + disk { + label = "topkick:yellow:disk"; + gpios = <&gpio0 21 1>; + linux,default-trigger = "ide-disk"; + }; + system2 { + label = "topkick:red:system"; + gpios = <&gpio1 5 1>; + }; + system { + label = "topkick:blue:system"; + gpios = <&gpio1 6 1>; + default-state = "on"; + }; + wifi { + label = "topkick:green:wifi"; + gpios = <&gpio1 7 1>; + }; + wifi2 { + label = "topkick:yellow:wifi"; + gpios = <&gpio1 16 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts index ccbf3275780..8295c833887 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts @@ -1,8 +1,39 @@ /dts-v1/; /include/ "kirkwood-ts219.dtsi" +/include/ "kirkwood-6281.dtsi" / { + ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_uart0 &pmx_uart1 &pmx_spi + &pmx_twsi0 &pmx_sata0 &pmx_sata1 + &pmx_ram_size &pmx_reset_button + &pmx_USB_copy_button &pmx_board_id>; + pinctrl-names = "default"; + + pmx_ram_size: pmx-ram-size { + /* RAM: 0: 256 MB, 1: 512 MB */ + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + pmx_USB_copy_button: pmx-USB-copy-button { + marvell,pins = "mpp15"; + marvell,function = "gpio"; + }; + pmx_reset_button: pmx-reset-button { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + pmx_board_id: pmx-board-id { + /* 0: TS-11x, 1: TS-21x */ + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + }; + }; + gpio_keys { compatible = "gpio-keys"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts index fbe9932161a..df3f95dfba3 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts @@ -1,8 +1,39 @@ /dts-v1/; /include/ "kirkwood-ts219.dtsi" +/include/ "kirkwood-6282.dtsi" / { + ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_uart0 &pmx_uart1 &pmx_spi + &pmx_twsi0 &pmx_sata0 &pmx_sata1 + &pmx_ram_size &pmx_reset_button + &pmx_USB_copy_button &pmx_board_id>; + pinctrl-names = "default"; + + pmx_ram_size: pmx-ram-size { + /* RAM: 0: 256 MB, 1: 512 MB */ + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + pmx_reset_button: pmx-reset-button { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + pmx_USB_copy_button: pmx-USB-copy-button { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pmx_board_id: pmx-board-id { + /* 0: TS-11x, 1: TS-21x */ + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + }; + }; + gpio_keys { compatible = "gpio-keys"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 4e5b8154a5b..a990c30f0a2 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -4,6 +4,10 @@ compatible = "marvell,kirkwood"; interrupt-parent = <&intc>; + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + }; intc: interrupt-controller { compatible = "marvell,orion-intc", "marvell,intc"; interrupt-controller; @@ -24,7 +28,8 @@ #gpio-cells = <2>; gpio-controller; reg = <0x10100 0x40>; - ngpio = <32>; + ngpios = <32>; + interrupt-controller; interrupts = <35>, <36>, <37>, <38>; }; @@ -33,7 +38,8 @@ #gpio-cells = <2>; gpio-controller; reg = <0x10140 0x40>; - ngpio = <18>; + ngpios = <18>; + interrupt-controller; interrupts = <39>, <40>, <41>; }; @@ -77,6 +83,13 @@ status = "okay"; }; + ehci@50000 { + compatible = "marvell,orion-ehci"; + reg = <0x50000 0x1000>; + interrupts = <19>; + status = "okay"; + }; + sata@80000 { compatible = "marvell,orion-sata"; reg = <0x80000 0x5000>; diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts new file mode 100644 index 00000000000..5a3a58b7e18 --- /dev/null +++ b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts @@ -0,0 +1,55 @@ +/* + * Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; +/include/ "orion5x.dtsi" + +/ { + model = "LaCie Ethernet Disk mini V2"; + compatible = "lacie,ethernet-disk-mini-v2", "marvell-orion5x-88f5182", "marvell,orion5x"; + + memory { + reg = <0x00000000 0x4000000>; /* 64 MB */ + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <166666667>; + status = "okay"; + }; + + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "Power-on Switch"; + linux,code = <116>; /* KEY_POWER */ + gpios = <&gpio0 18 0>; + }; + }; + + gpio_leds { + compatible = "gpio-leds"; + + led@1 { + label = "power:blue"; + gpios = <&gpio0 16 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi new file mode 100644 index 00000000000..8aad00f81ed --- /dev/null +++ b/arch/arm/boot/dts/orion5x.dtsi @@ -0,0 +1,98 @@ +/* + * Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/include/ "skeleton.dtsi" + +/ { + model = "Marvell Orion5x SoC"; + compatible = "marvell,orion5x"; + interrupt-parent = <&intc>; + + intc: interrupt-controller { + compatible = "marvell,orion-intc", "marvell,intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xf1020204 0x04>; + }; + + ocp@f1000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0xf1000000 0x4000000 + 0xf2200000 0xf2200000 0x0000800>; + #address-cells = <1>; + #size-cells = <1>; + + gpio0: gpio@10100 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0x10100 0x40>; + ngpio = <32>; + interrupts = <6>, <7>, <8>, <9>; + }; + + serial@12000 { + compatible = "ns16550a"; + reg = <0x12000 0x100>; + reg-shift = <2>; + interrupts = <3>; + /* set clock-frequency in board dts */ + status = "disabled"; + }; + + serial@12100 { + compatible = "ns16550a"; + reg = <0x12100 0x100>; + reg-shift = <2>; + interrupts = <4>; + /* set clock-frequency in board dts */ + status = "disabled"; + }; + + spi@10600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + reg = <0x10600 0x28>; + status = "disabled"; + }; + + wdt@20300 { + compatible = "marvell,orion-wdt"; + reg = <0x20300 0x28>; + status = "okay"; + }; + + sata@80000 { + compatible = "marvell,orion-sata"; + reg = <0x80000 0x5000>; + interrupts = <29>; + status = "disabled"; + }; + + i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <5>; + clock-frequency = <100000>; + status = "disabled"; + }; + + crypto@90000 { + compatible = "marvell,orion-crypto"; + reg = <0x90000 0x10000>, + <0xf2200000 0x800>; + reg-names = "regs", "sram"; + interrupts = <22>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 1f7f49aabe6..efa603d47a6 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -169,8 +169,8 @@ pinmux: pinmux { compatible = "nvidia,tegra30-pinmux"; - reg = <0x70000868 0xd0 /* Pad control registers */ - 0x70003000 0x3e0>; /* Mux registers */ + reg = <0x70000868 0xd4 /* Pad control registers */ + 0x70003000 0x3e4>; /* Mux registers */ }; serial@70006000 { diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig index 40db34cf277..0b7ee92c571 100644 --- a/arch/arm/configs/dove_defconfig +++ b/arch/arm/configs/dove_defconfig @@ -8,11 +8,19 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_DOVE=y CONFIG_MACH_DOVE_DB=y +CONFIG_MACH_CM_A510=y +CONFIG_MACH_DOVE_DT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_HIGHMEM=y +CONFIG_USE_OF=y +CONFIG_ATAGS=y +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y CONFIG_VFP=y CONFIG_NET=y CONFIG_PACKET=y @@ -62,6 +70,9 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_PCI is not set CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y CONFIG_I2C_CHARDEV=y @@ -74,6 +85,18 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_STORAGE=y +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_IO_ACCESSORS=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_DOVE=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_MV=y CONFIG_DMADEVICES=y @@ -122,6 +145,7 @@ CONFIG_CRYPTO_TWOFISH=y CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_LZO=y # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_DEV_MV_CESA=y CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index 74eee0c78f2..93f3794ba5c 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -27,6 +27,14 @@ CONFIG_MACH_GOFLEXNET_DT=y CONFIG_MACH_LSXL_DT=y CONFIG_MACH_IOMEGA_IX2_200_DT=y CONFIG_MACH_KM_KIRKWOOD_DT=y +CONFIG_MACH_INETSPACE_V2_DT=y +CONFIG_MACH_MPLCEC4_DT=y +CONFIG_MACH_NETSPACE_V2_DT=y +CONFIG_MACH_NETSPACE_MAX_V2_DT=y +CONFIG_MACH_NETSPACE_LITE_V2_DT=y +CONFIG_MACH_NETSPACE_MINI_V2_DT=y +CONFIG_MACH_OPENBLOCKS_A6_DT=y +CONFIG_MACH_TOPKICK_DT=y CONFIG_MACH_TS219=y CONFIG_MACH_TS41X=y CONFIG_MACH_DOCKSTAR=y @@ -40,6 +48,7 @@ CONFIG_MACH_D2NET_V2=y CONFIG_MACH_NET2BIG_V2=y CONFIG_MACH_NET5BIG_V2=y CONFIG_MACH_T5325=y +CONFIG_MACH_NSA310_DT=y # CONFIG_CPU_FEROCEON_OLD_ID is not set CONFIG_PREEMPT=y CONFIG_AEABI=y diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index cd5e6ba9a54..952430d9e2d 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -1,7 +1,8 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_EXPERT=y # CONFIG_SLUB_DEBUG is not set CONFIG_PROFILING=y @@ -10,6 +11,8 @@ CONFIG_KPROBES=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_BSD_DISKLABEL=y CONFIG_ARCH_ORION5X=y CONFIG_MACH_DB88F5281=y CONFIG_MACH_RD88F5182=y @@ -24,7 +27,7 @@ CONFIG_MACH_TS409=y CONFIG_MACH_WRT350N_V2=y CONFIG_MACH_TS78XX=y CONFIG_MACH_MV2120=y -CONFIG_MACH_EDMINI_V2=y +CONFIG_MACH_EDMINI_V2_DT=y CONFIG_MACH_D2NET=y CONFIG_MACH_BIGDISK=y CONFIG_MACH_NET2BIG=y @@ -33,17 +36,13 @@ CONFIG_MACH_WNR854T=y CONFIG_MACH_RD88F5181L_GE=y CONFIG_MACH_RD88F5181L_FXO=y CONFIG_MACH_RD88F6183AP_GE=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_AEABI=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y CONFIG_FPE_NWFPE=y CONFIG_VFP=y -# CONFIG_SUSPEND is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -54,13 +53,10 @@ CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set CONFIG_NET_DSA=y -CONFIG_NET_DSA_MV88E6131=y -CONFIG_NET_DSA_MV88E6123_61_65=y CONFIG_NET_PKTGEN=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -82,12 +78,11 @@ CONFIG_CHR_DEV_SG=m CONFIG_ATA=y CONFIG_SATA_MV=y CONFIG_NETDEVICES=y -CONFIG_MARVELL_PHY=y -CONFIG_NET_ETHERNET=y CONFIG_MII=y -CONFIG_NET_PCI=y +CONFIG_NET_DSA_MV88E6131=y +CONFIG_NET_DSA_MV88E6123_61_65=y CONFIG_MV643XX_ETH=y -# CONFIG_NETDEV_10000 is not set +CONFIG_MARVELL_PHY=y # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set @@ -95,11 +90,12 @@ CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set # CONFIG_VT is not set +CONFIG_LEGACY_PTY_COUNT=16 CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_PCI is not set CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_LEGACY_PTY_COUNT=16 +CONFIG_SERIAL_OF_PLATFORM=y CONFIG_HW_RANDOM_TIMERIOMEM=m CONFIG_I2C=y # CONFIG_I2C_COMPAT is not set @@ -109,10 +105,8 @@ CONFIG_GPIO_SYSFS=y CONFIG_SENSORS_LM75=y # CONFIG_VGA_ARB is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_PRINTER=y CONFIG_USB_STORAGE=y CONFIG_USB_STORAGE_DATAFAB=y @@ -140,7 +134,6 @@ CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_EXT4_FS=m -CONFIG_INOTIFY=y CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_UDF_FS=m @@ -150,25 +143,18 @@ CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_BSD_DISKLABEL=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_2=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_LATENCYTOP=y -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_ECB=m diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 1e122bcd784..3cee0e6ea7c 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -68,7 +68,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) /* Enable overcurrent notification */ for (i = 0; i < data->ports; i++) { - if (data->overcurrent_pin[i]) + if (gpio_is_valid(data->overcurrent_pin[i])) at91_set_gpio_input(data->overcurrent_pin[i], 1); } diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index aa1e5872988..414bd855fb0 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -72,7 +72,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) /* Enable overcurrent notification */ for (i = 0; i < data->ports; i++) { - if (data->overcurrent_pin[i]) + if (gpio_is_valid(data->overcurrent_pin[i])) at91_set_gpio_input(data->overcurrent_pin[i], 1); } diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index b9487696b7b..cd604aad8e9 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -72,7 +72,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) /* Enable overcurrent notification */ for (i = 0; i < data->ports; i++) { - if (data->overcurrent_pin[i]) + if (gpio_is_valid(data->overcurrent_pin[i])) at91_set_gpio_input(data->overcurrent_pin[i], 1); } diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index cb85da2ecce..9c61e59a210 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -78,7 +78,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) /* Enable overcurrent notification */ for (i = 0; i < data->ports; i++) { - if (data->overcurrent_pin[i]) + if (gpio_is_valid(data->overcurrent_pin[i])) at91_set_gpio_input(data->overcurrent_pin[i], 1); } diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index b1596072dcc..fcd233cb33d 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -1841,8 +1841,8 @@ static struct resource sha_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_AESTDESSHA, - .end = AT91SAM9G45_ID_AESTDESSHA, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, .flags = IORESOURCE_IRQ, }, }; @@ -1874,8 +1874,8 @@ static struct resource tdes_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_AESTDESSHA, - .end = AT91SAM9G45_ID_AESTDESSHA, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, .flags = IORESOURCE_IRQ, }, }; @@ -1910,8 +1910,8 @@ static struct resource aes_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_AESTDESSHA, - .end = AT91SAM9G45_ID_AESTDESSHA, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-highbank/system.c b/arch/arm/mach-highbank/system.c index 82c27230d4a..86e37cd9376 100644 --- a/arch/arm/mach-highbank/system.c +++ b/arch/arm/mach-highbank/system.c @@ -28,6 +28,7 @@ void highbank_restart(char mode, const char *cmd) hignbank_set_pwr_soft_reset(); scu_power_mode(scu_base_addr, SCU_PM_POWEROFF); - cpu_do_idle(); + while (1) + cpu_do_idle(); } diff --git a/arch/arm/mach-imx/clk-gate2.c b/arch/arm/mach-imx/clk-gate2.c index 3c1b8ff9a0a..cc49c7ae186 100644 --- a/arch/arm/mach-imx/clk-gate2.c +++ b/arch/arm/mach-imx/clk-gate2.c @@ -112,7 +112,7 @@ struct clk *clk_register_gate2(struct device *dev, const char *name, clk = clk_register(dev, &gate->hw); if (IS_ERR(clk)) - kfree(clk); + kfree(gate); return clk; } diff --git a/arch/arm/mach-imx/ehci-imx25.c b/arch/arm/mach-imx/ehci-imx25.c index 27e40d17de9..134c190e300 100644 --- a/arch/arm/mach-imx/ehci-imx25.c +++ b/arch/arm/mach-imx/ehci-imx25.c @@ -30,7 +30,7 @@ #define MX25_H1_SIC_SHIFT 21 #define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT) #define MX25_H1_PP_BIT (1 << 18) -#define MX25_H1_PM_BIT (1 << 8) +#define MX25_H1_PM_BIT (1 << 16) #define MX25_H1_IPPUE_UP_BIT (1 << 7) #define MX25_H1_IPPUE_DOWN_BIT (1 << 6) #define MX25_H1_TLL_BIT (1 << 5) diff --git a/arch/arm/mach-imx/ehci-imx35.c b/arch/arm/mach-imx/ehci-imx35.c index a596f709a93..554e7cccff5 100644 --- a/arch/arm/mach-imx/ehci-imx35.c +++ b/arch/arm/mach-imx/ehci-imx35.c @@ -30,7 +30,7 @@ #define MX35_H1_SIC_SHIFT 21 #define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT) #define MX35_H1_PP_BIT (1 << 18) -#define MX35_H1_PM_BIT (1 << 8) +#define MX35_H1_PM_BIT (1 << 16) #define MX35_H1_IPPUE_UP_BIT (1 << 7) #define MX35_H1_IPPUE_DOWN_BIT (1 << 6) #define MX35_H1_TLL_BIT (1 << 5) diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 50bca5032b7..503d7dd944f 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -46,6 +46,11 @@ config MACH_GURUPLUG config ARCH_KIRKWOOD_DT bool "Marvell Kirkwood Flattened Device Tree" + select POWER_SUPPLY + select POWER_RESET + select POWER_RESET_GPIO + select REGULATOR + select REGULATOR_FIXED_VOLTAGE select USE_OF help Say 'Y' here if you want your kernel to support the @@ -130,6 +135,63 @@ config MACH_KM_KIRKWOOD_DT Say 'Y' here if you want your kernel to support the Keymile Kirkwood Reference Desgin, using Flattened Device Tree. +config MACH_INETSPACE_V2_DT + bool "LaCie Internet Space v2 NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the LaCie + Internet Space v2 NAS, using Flattened Device Tree. + +config MACH_MPLCEC4_DT + bool "MPL CEC4 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + MPL CEC4 (Flattened Device Tree). + +config MACH_NETSPACE_V2_DT + bool "LaCie Network Space v2 NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the LaCie + Network Space v2 NAS, using Flattened Device Tree. + +config MACH_NETSPACE_MAX_V2_DT + bool "LaCie Network Space Max v2 NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the LaCie + Network Space Max v2 NAS, using Flattened Device Tree. + +config MACH_NETSPACE_LITE_V2_DT + bool "LaCie Network Space Lite v2 NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the LaCie + Network Space Lite v2 NAS, using Flattened Device Tree. + +config MACH_NETSPACE_MINI_V2_DT + bool "LaCie Network Space Mini v2 NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the LaCie + Network Space Mini v2 NAS (aka SafeBox), using Flattened + Device Tree. + +config MACH_OPENBLOCKS_A6_DT + bool "Plat'Home OpenBlocks A6 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Plat'Home OpenBlocks A6 (Flattened Device Tree). + +config MACH_TOPKICK_DT + bool "USI Topkick (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + USI Topkick, using Flattened Device Tree + config MACH_TS219 bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" help @@ -216,6 +278,14 @@ config MACH_T5325 Say 'Y' here if you want your kernel to support the HP t5325 Thin Client. +config MACH_NSA310_DT + bool "ZyXEL NSA-310 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + select ARM_ATAG_DTB_COMPAT + help + Say 'Y' here if you want your kernel to support the + ZyXEL NSA-310 board (Flattened Device Tree). + endmenu endif diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 294779f892d..8d2e5a96247 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -31,3 +31,12 @@ obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += board-iomega_ix2_200.o obj-$(CONFIG_MACH_KM_KIRKWOOD_DT) += board-km_kirkwood.o +obj-$(CONFIG_MACH_INETSPACE_V2_DT) += board-ns2.o +obj-$(CONFIG_MACH_MPLCEC4_DT) += board-mplcec4.o +obj-$(CONFIG_MACH_NETSPACE_V2_DT) += board-ns2.o +obj-$(CONFIG_MACH_NETSPACE_MAX_V2_DT) += board-ns2.o +obj-$(CONFIG_MACH_NETSPACE_LITE_V2_DT) += board-ns2.o +obj-$(CONFIG_MACH_NETSPACE_MINI_V2_DT) += board-ns2.o +obj-$(CONFIG_MACH_NSA310_DT) += board-nsa310.o +obj-$(CONFIG_MACH_OPENBLOCKS_A6_DT) += board-openblocks_a6.o +obj-$(CONFIG_MACH_TOPKICK_DT) += board-usi_topkick.o diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c index 43d16d6714b..a1aa87f0918 100644 --- a/arch/arm/mach-kirkwood/board-dnskw.c +++ b/arch/arm/mach-kirkwood/board-dnskw.c @@ -17,51 +17,11 @@ #include <linux/mv643xx_eth.h> #include <linux/gpio.h> #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data dnskw_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -static unsigned int dnskw_mpp_config[] __initdata = { - MPP13_UART1_TXD, /* Custom ... */ - MPP14_UART1_RXD, /* ... Controller (DNS-320 only) */ - MPP20_SATA1_ACTn, /* LED: White Right HDD */ - MPP21_SATA0_ACTn, /* LED: White Left HDD */ - MPP24_GPIO, - MPP25_GPIO, - MPP26_GPIO, /* LED: Power */ - MPP27_GPIO, /* LED: Red Right HDD */ - MPP28_GPIO, /* LED: Red Left HDD */ - MPP29_GPIO, /* LED: Red USB (DNS-325 only) */ - MPP30_GPIO, - MPP31_GPIO, - MPP32_GPIO, - MPP33_GPO, - MPP34_GPIO, /* Button: Front power */ - MPP35_GPIO, /* LED: Red USB (DNS-320 only) */ - MPP36_GPIO, /* Power: Turn off board */ - MPP37_GPIO, /* Power: Turn back on after power failure */ - MPP38_GPIO, - MPP39_GPIO, /* Power: SATA0 */ - MPP40_GPIO, /* Power: SATA1 */ - MPP41_GPIO, /* SATA0 present */ - MPP42_GPIO, /* SATA1 present */ - MPP43_GPIO, /* LED: White USB */ - MPP44_GPIO, /* Fan: Tachometer Pin */ - MPP45_GPIO, /* Fan: high speed */ - MPP46_GPIO, /* Fan: low speed */ - MPP47_GPIO, /* Button: Back unmount */ - MPP48_GPIO, /* Button: Back reset */ - MPP49_GPIO, /* Temp Alarm (DNS-325) Pin of U5 (DNS-320) */ - 0 -}; - -static void dnskw_power_off(void) -{ - gpio_set_value(36, 1); -} - /* Register any GPIO for output and set the value */ static void __init dnskw_gpio_register(unsigned gpio, char *name, int def) { @@ -76,22 +36,8 @@ static void __init dnskw_gpio_register(unsigned gpio, char *name, int def) void __init dnskw_init(void) { - kirkwood_mpp_conf(dnskw_mpp_config); - - kirkwood_ehci_init(); kirkwood_ge00_init(&dnskw_ge00_data); - /* Register power-off GPIO. */ - if (gpio_request(36, "dnskw:power:off") == 0 - && gpio_direction_output(36, 0) == 0) - pm_power_off = dnskw_power_off; - else - pr_err("dnskw: failed to configure power-off GPIO\n"); - - /* Ensure power is supplied to both HDDs */ - dnskw_gpio_register(39, "dnskw:power:sata0", 1); - dnskw_gpio_register(40, "dnskw:power:sata1", 1); - /* Set NAS to turn back on after a power failure */ dnskw_gpio_register(37, "dnskw:power:recover", 1); } diff --git a/arch/arm/mach-kirkwood/board-dockstar.c b/arch/arm/mach-kirkwood/board-dockstar.c index f2fbb023e67..726cfc4b892 100644 --- a/arch/arm/mach-kirkwood/board-dockstar.c +++ b/arch/arm/mach-kirkwood/board-dockstar.c @@ -24,7 +24,6 @@ #include <linux/of_fdt.h> #include <linux/of_irq.h> #include <linux/of_platform.h> -#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -32,30 +31,15 @@ #include <mach/bridge-regs.h> #include <linux/platform_data/mmc-mvsdio.h> #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data dockstar_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(0), }; -static unsigned int dockstar_mpp_config[] __initdata = { - MPP29_GPIO, /* USB Power Enable */ - MPP46_GPIO, /* LED green */ - MPP47_GPIO, /* LED orange */ - 0 -}; - void __init dockstar_dt_init(void) { /* * Basic setup. Needs to be called early. */ - kirkwood_mpp_conf(dockstar_mpp_config); - - if (gpio_request(29, "USB Power Enable") != 0 || - gpio_direction_output(29, 1) != 0) - pr_err("can't setup GPIO 29 (USB Power Enable)\n"); - kirkwood_ehci_init(); - kirkwood_ge00_init(&dockstar_ge00_data); } diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c index 20af53a56c0..3e2d95d629e 100644 --- a/arch/arm/mach-kirkwood/board-dreamplug.c +++ b/arch/arm/mach-kirkwood/board-dreamplug.c @@ -32,7 +32,6 @@ #include <mach/bridge-regs.h> #include <linux/platform_data/mmc-mvsdio.h> #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data dreamplug_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(0), @@ -46,25 +45,11 @@ static struct mvsdio_platform_data dreamplug_mvsdio_data = { /* unfortunately the CD signal has not been connected */ }; -static unsigned int dreamplug_mpp_config[] __initdata = { - MPP0_SPI_SCn, - MPP1_SPI_MOSI, - MPP2_SPI_SCK, - MPP3_SPI_MISO, - MPP47_GPIO, /* Bluetooth LED */ - MPP48_GPIO, /* Wifi LED */ - MPP49_GPIO, /* Wifi AP LED */ - 0 -}; - void __init dreamplug_init(void) { /* * Basic setup. Needs to be called early. */ - kirkwood_mpp_conf(dreamplug_mpp_config); - - kirkwood_ehci_init(); kirkwood_ge00_init(&dreamplug_ge00_data); kirkwood_ge01_init(&dreamplug_ge01_data); kirkwood_sdio_init(&dreamplug_mvsdio_data); diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index d94872fed8c..70eb01d9608 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -30,6 +30,8 @@ struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL), OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0", NULL), + OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011100, "mv64xxx_i2c.1", + NULL), OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL), OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL), OF_DEV_AUXDATA("marvell,orion-nand", 0xf4000000, "orion_nand", NULL), @@ -94,6 +96,25 @@ static void __init kirkwood_dt_init(void) if (of_machine_is_compatible("keymile,km_kirkwood")) km_kirkwood_init(); + if (of_machine_is_compatible("lacie,inetspace_v2") || + of_machine_is_compatible("lacie,netspace_v2") || + of_machine_is_compatible("lacie,netspace_max_v2") || + of_machine_is_compatible("lacie,netspace_lite_v2") || + of_machine_is_compatible("lacie,netspace_mini_v2")) + ns2_init(); + + if (of_machine_is_compatible("mpl,cec4")) + mplcec4_init(); + + if (of_machine_is_compatible("plathome,openblocks-a6")) + openblocks_a6_init(); + + if (of_machine_is_compatible("usi,topkick")) + usi_topkick_init(); + + if (of_machine_is_compatible("zyxel,nsa310")) + nsa310_init(); + of_platform_populate(NULL, kirkwood_dt_match_table, kirkwood_auxdata_lookup, NULL); } @@ -110,6 +131,15 @@ static const char *kirkwood_dt_board_compat[] = { "buffalo,lsxl", "iom,ix2-200", "keymile,km_kirkwood", + "lacie,inetspace_v2", + "lacie,netspace_max_v2", + "lacie,netspace_v2", + "lacie,netspace_lite_v2", + "lacie,netspace_mini_v2", + "mpl,cec4", + "plathome,openblocks-a6", + "usi,topkick", + "zyxel,nsa310", NULL }; diff --git a/arch/arm/mach-kirkwood/board-goflexnet.c b/arch/arm/mach-kirkwood/board-goflexnet.c index 001ca8c9698..3b9661802f8 100644 --- a/arch/arm/mach-kirkwood/board-goflexnet.c +++ b/arch/arm/mach-kirkwood/board-goflexnet.c @@ -26,7 +26,6 @@ #include <linux/of_fdt.h> #include <linux/of_irq.h> #include <linux/of_platform.h> -#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -34,38 +33,15 @@ #include <mach/bridge-regs.h> #include <linux/platform_data/mmc-mvsdio.h> #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data goflexnet_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(0), }; -static unsigned int goflexnet_mpp_config[] __initdata = { - MPP29_GPIO, /* USB Power Enable */ - MPP47_GPIO, /* LED Orange */ - MPP46_GPIO, /* LED Green */ - MPP45_GPIO, /* LED Left Capacity 3 */ - MPP44_GPIO, /* LED Left Capacity 2 */ - MPP43_GPIO, /* LED Left Capacity 1 */ - MPP42_GPIO, /* LED Left Capacity 0 */ - MPP41_GPIO, /* LED Right Capacity 3 */ - MPP40_GPIO, /* LED Right Capacity 2 */ - MPP39_GPIO, /* LED Right Capacity 1 */ - MPP38_GPIO, /* LED Right Capacity 0 */ - 0 -}; - void __init goflexnet_init(void) { /* * Basic setup. Needs to be called early. */ - kirkwood_mpp_conf(goflexnet_mpp_config); - - if (gpio_request(29, "USB Power Enable") != 0 || - gpio_direction_output(29, 1) != 0) - pr_err("can't setup GPIO 29 (USB Power Enable)\n"); - kirkwood_ehci_init(); - kirkwood_ge00_init(&goflexnet_ge00_data); } diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c index cfc47f80e73..b6e5db9c7ed 100644 --- a/arch/arm/mach-kirkwood/board-ib62x0.c +++ b/arch/arm/mach-kirkwood/board-ib62x0.c @@ -17,55 +17,20 @@ #include <linux/mtd/partitions.h> #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> -#include <linux/gpio.h> #include <linux/input.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/kirkwood.h> #include "common.h" -#include "mpp.h" - -#define IB62X0_GPIO_POWER_OFF 24 static struct mv643xx_eth_platform_data ib62x0_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -static unsigned int ib62x0_mpp_config[] __initdata = { - MPP0_NF_IO2, - MPP1_NF_IO3, - MPP2_NF_IO4, - MPP3_NF_IO5, - MPP4_NF_IO6, - MPP5_NF_IO7, - MPP18_NF_IO0, - MPP19_NF_IO1, - MPP22_GPIO, /* OS LED red */ - MPP24_GPIO, /* Power off device */ - MPP25_GPIO, /* OS LED green */ - MPP27_GPIO, /* USB transfer LED */ - MPP28_GPIO, /* Reset button */ - MPP29_GPIO, /* USB Copy button */ - 0 -}; - -static void ib62x0_power_off(void) -{ - gpio_set_value(IB62X0_GPIO_POWER_OFF, 1); -} - void __init ib62x0_init(void) { /* * Basic setup. Needs to be called early. */ - kirkwood_mpp_conf(ib62x0_mpp_config); - - kirkwood_ehci_init(); kirkwood_ge00_init(&ib62x0_ge00_data); - if (gpio_request(IB62X0_GPIO_POWER_OFF, "ib62x0:power:off") == 0 && - gpio_direction_output(IB62X0_GPIO_POWER_OFF, 0) == 0) - pm_power_off = ib62x0_power_off; - else - pr_err("board-ib62x0: failed to configure power-off GPIO\n"); } diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c index d084b1e2943..7d3c54c8490 100644 --- a/arch/arm/mach-kirkwood/board-iconnect.c +++ b/arch/arm/mach-kirkwood/board-iconnect.c @@ -21,31 +21,13 @@ #include <asm/mach/arch.h> #include <mach/kirkwood.h> #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data iconnect_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(11), }; -static unsigned int iconnect_mpp_config[] __initdata = { - MPP12_GPIO, - MPP35_GPIO, - MPP41_GPIO, - MPP42_GPIO, - MPP43_GPIO, - MPP44_GPIO, - MPP45_GPIO, - MPP46_GPIO, - MPP47_GPIO, - MPP48_GPIO, - 0 -}; - void __init iconnect_init(void) { - kirkwood_mpp_conf(iconnect_mpp_config); - - kirkwood_ehci_init(); kirkwood_ge00_init(&iconnect_ge00_data); } diff --git a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c index 158fb97d039..22b86494671 100644 --- a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c +++ b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c @@ -15,7 +15,6 @@ #include <linux/ethtool.h> #include <mach/kirkwood.h> #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = { .phy_addr = MV643XX_ETH_PHY_NONE, @@ -23,35 +22,10 @@ static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = { .duplex = DUPLEX_FULL, }; -static unsigned int iomega_ix2_200_mpp_config[] __initdata = { - MPP12_GPIO, /* Reset Button */ - MPP14_GPIO, /* Power Button */ - MPP15_GPIO, /* Backup LED (blue) */ - MPP16_GPIO, /* Power LED (white) */ - MPP35_GPIO, /* OTB Button */ - MPP36_GPIO, /* Rebuild LED (white) */ - MPP37_GPIO, /* Health LED (red) */ - MPP38_GPIO, /* SATA LED brightness control 1 */ - MPP39_GPIO, /* SATA LED brightness control 2 */ - MPP40_GPIO, /* Backup LED brightness control 1 */ - MPP41_GPIO, /* Backup LED brightness control 2 */ - MPP42_GPIO, /* Power LED brightness control 1 */ - MPP43_GPIO, /* Power LED brightness control 2 */ - MPP44_GPIO, /* Health LED brightness control 1 */ - MPP45_GPIO, /* Health LED brightness control 2 */ - MPP46_GPIO, /* Rebuild LED brightness control 1 */ - MPP47_GPIO, /* Rebuild LED brightness control 2 */ - 0 -}; - void __init iomega_ix2_200_init(void) { /* * Basic setup. Needs to be called early. */ - kirkwood_mpp_conf(iomega_ix2_200_mpp_config); - - kirkwood_ehci_init(); - kirkwood_ge01_init(&iomega_ix2_200_ge00_data); } diff --git a/arch/arm/mach-kirkwood/board-km_kirkwood.c b/arch/arm/mach-kirkwood/board-km_kirkwood.c index f7d32834b75..44e4605ba0b 100644 --- a/arch/arm/mach-kirkwood/board-km_kirkwood.c +++ b/arch/arm/mach-kirkwood/board-km_kirkwood.c @@ -18,27 +18,15 @@ #include <linux/clk.h> #include <linux/clk-private.h> #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data km_kirkwood_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(0), }; -static unsigned int km_kirkwood_mpp_config[] __initdata = { - MPP8_GPIO, /* I2C SDA */ - MPP9_GPIO, /* I2C SCL */ - 0 -}; - void __init km_kirkwood_init(void) { struct clk *sata_clk; /* - * Basic setup. Needs to be called early. - */ - kirkwood_mpp_conf(km_kirkwood_mpp_config); - - /* * Our variant of kirkwood (integrated in the Bobcat) hangs on accessing * SATA bits (14-15) of the Clock Gating Control Register. Since these * devices are also not present in this variant, their clocks get @@ -52,6 +40,5 @@ void __init km_kirkwood_init(void) if (!IS_ERR(sata_clk)) sata_clk->flags |= CLK_IGNORE_UNUSED; - kirkwood_ehci_init(); kirkwood_ge00_init(&km_kirkwood_ge00_data); } diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c index 83d8975592f..d60cdab46f4 100644 --- a/arch/arm/mach-kirkwood/board-lsxl.c +++ b/arch/arm/mach-kirkwood/board-lsxl.c @@ -19,14 +19,7 @@ #include <linux/spi/flash.h> #include <linux/spi/spi.h> #include <linux/mv643xx_eth.h> -#include <linux/gpio.h> -#include <linux/gpio-fan.h> -#include <linux/input.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/kirkwood.h> #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data lsxl_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(0), @@ -36,68 +29,6 @@ static struct mv643xx_eth_platform_data lsxl_ge01_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -static unsigned int lsxl_mpp_config[] __initdata = { - MPP10_GPO, /* HDD Power Enable */ - MPP11_GPIO, /* USB Vbus Enable */ - MPP18_GPO, /* FAN High Enable# */ - MPP19_GPO, /* FAN Low Enable# */ - MPP36_GPIO, /* Function Blue LED */ - MPP37_GPIO, /* Alarm LED */ - MPP38_GPIO, /* Info LED */ - MPP39_GPIO, /* Power LED */ - MPP40_GPIO, /* Fan Lock */ - MPP41_GPIO, /* Function Button */ - MPP42_GPIO, /* Power Switch */ - MPP43_GPIO, /* Power Auto Switch */ - MPP48_GPIO, /* Function Red LED */ - 0 -}; - -#define LSXL_GPIO_FAN_HIGH 18 -#define LSXL_GPIO_FAN_LOW 19 -#define LSXL_GPIO_FAN_LOCK 40 - -static struct gpio_fan_alarm lsxl_alarm = { - .gpio = LSXL_GPIO_FAN_LOCK, -}; - -static struct gpio_fan_speed lsxl_speeds[] = { - { - .rpm = 0, - .ctrl_val = 3, - }, { - .rpm = 1500, - .ctrl_val = 1, - }, { - .rpm = 3250, - .ctrl_val = 2, - }, { - .rpm = 5000, - .ctrl_val = 0, - } -}; - -static int lsxl_gpio_list[] = { - LSXL_GPIO_FAN_HIGH, LSXL_GPIO_FAN_LOW, -}; - -static struct gpio_fan_platform_data lsxl_fan_data = { - .num_ctrl = ARRAY_SIZE(lsxl_gpio_list), - .ctrl = lsxl_gpio_list, - .alarm = &lsxl_alarm, - .num_speed = ARRAY_SIZE(lsxl_speeds), - .speed = lsxl_speeds, -}; - -static struct platform_device lsxl_fan_device = { - .name = "gpio-fan", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &lsxl_fan_data, - }, -}; - /* * On the LS-XHL/LS-CHLv2, the shutdown process is following: * - Userland monitors key events until the power switch goes to off position @@ -111,24 +42,14 @@ static void lsxl_power_off(void) kirkwood_restart('h', NULL); } -#define LSXL_GPIO_HDD_POWER 10 -#define LSXL_GPIO_USB_POWER 11 - void __init lsxl_init(void) { /* * Basic setup. Needs to be called early. */ - kirkwood_mpp_conf(lsxl_mpp_config); - - /* usb and sata power on */ - gpio_set_value(LSXL_GPIO_USB_POWER, 1); - gpio_set_value(LSXL_GPIO_HDD_POWER, 1); - kirkwood_ehci_init(); kirkwood_ge00_init(&lsxl_ge00_data); kirkwood_ge01_init(&lsxl_ge01_data); - platform_device_register(&lsxl_fan_device); /* register power-off method */ pm_power_off = lsxl_power_off; diff --git a/arch/arm/mach-kirkwood/board-mplcec4.c b/arch/arm/mach-kirkwood/board-mplcec4.c new file mode 100644 index 00000000000..56bfe5a1605 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-mplcec4.c @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2012 MPL AG, Switzerland + * Stefan Peter <s.peter@mpl.ch> + * + * arch/arm/mach-kirkwood/board-mplcec4.c + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mv643xx_eth.h> +#include <linux/platform_data/mmc-mvsdio.h> +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data mplcec4_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(1), +}; + +static struct mv643xx_eth_platform_data mplcec4_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(2), +}; + +static struct mvsdio_platform_data mplcec4_mvsdio_data = { + .gpio_card_detect = 47, /* MPP47 used as SD card detect */ +}; + + +void __init mplcec4_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_ge00_init(&mplcec4_ge00_data); + kirkwood_ge01_init(&mplcec4_ge01_data); + kirkwood_sdio_init(&mplcec4_mvsdio_data); + kirkwood_pcie_init(KW_PCIE0); +} + + + diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c new file mode 100644 index 00000000000..8821720ab5a --- /dev/null +++ b/arch/arm/mach-kirkwood/board-ns2.c @@ -0,0 +1,86 @@ +/* + * Copyright 2012 (C), Simon Guinot <simon.guinot@sequanux.org> + * + * arch/arm/mach-kirkwood/board-ns2.c + * + * LaCie Network Space v2 board (and parents) initialization for drivers + * not converted to flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mv643xx_eth.h> +#include <linux/gpio.h> +#include <linux/of.h> +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data ns2_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +static unsigned int ns2_mpp_config[] __initdata = { + MPP0_SPI_SCn, + MPP1_SPI_MOSI, + MPP2_SPI_SCK, + MPP3_SPI_MISO, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP6_SYSRST_OUTn, + MPP7_GPO, /* Fan speed (bit 1) */ + MPP8_TW0_SDA, + MPP9_TW0_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP12_GPO, /* Red led */ + MPP14_GPIO, /* USB fuse */ + MPP16_GPIO, /* SATA 0 power */ + MPP17_GPIO, /* SATA 1 power */ + MPP18_NF_IO0, + MPP19_NF_IO1, + MPP20_SATA1_ACTn, + MPP21_SATA0_ACTn, + MPP22_GPIO, /* Fan speed (bit 0) */ + MPP23_GPIO, /* Fan power */ + MPP24_GPIO, /* USB mode select */ + MPP25_GPIO, /* Fan rotation fail */ + MPP26_GPIO, /* USB device vbus */ + MPP28_GPIO, /* USB enable host vbus */ + MPP29_GPIO, /* Blue led (slow register) */ + MPP30_GPIO, /* Blue led (command register) */ + MPP31_GPIO, /* Board power off */ + MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */ + MPP33_GPO, /* Fan speed (bit 2) */ + 0 +}; + +#define NS2_GPIO_POWER_OFF 31 + +static void ns2_power_off(void) +{ + gpio_set_value(NS2_GPIO_POWER_OFF, 1); +} + +void __init ns2_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(ns2_mpp_config); + + if (of_machine_is_compatible("lacie,netspace_lite_v2") || + of_machine_is_compatible("lacie,netspace_mini_v2")) + ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); + kirkwood_ge00_init(&ns2_ge00_data); + + if (gpio_request(NS2_GPIO_POWER_OFF, "power-off") == 0 && + gpio_direction_output(NS2_GPIO_POWER_OFF, 0) == 0) + pm_power_off = ns2_power_off; + else + pr_err("ns2: failed to configure power-off GPIO\n"); +} diff --git a/arch/arm/mach-kirkwood/board-nsa310.c b/arch/arm/mach-kirkwood/board-nsa310.c new file mode 100644 index 00000000000..f58d2e1a404 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-nsa310.c @@ -0,0 +1,101 @@ +/* + * arch/arm/mach-kirkwood/nsa-310-setup.c + * + * ZyXEL NSA-310 Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/gpio.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/kirkwood.h> +#include "common.h" +#include "mpp.h" + +#define NSA310_GPIO_USB_POWER_OFF 21 +#define NSA310_GPIO_POWER_OFF 48 + +static unsigned int nsa310_mpp_config[] __initdata = { + MPP12_GPIO, /* led esata green */ + MPP13_GPIO, /* led esata red */ + MPP15_GPIO, /* led usb green */ + MPP16_GPIO, /* led usb red */ + MPP21_GPIO, /* control usb power off */ + MPP28_GPIO, /* led sys green */ + MPP29_GPIO, /* led sys red */ + MPP36_GPIO, /* key reset */ + MPP37_GPIO, /* key copy */ + MPP39_GPIO, /* led copy green */ + MPP40_GPIO, /* led copy red */ + MPP41_GPIO, /* led hdd green */ + MPP42_GPIO, /* led hdd red */ + MPP44_GPIO, /* ?? */ + MPP46_GPIO, /* key power */ + MPP48_GPIO, /* control power off */ + 0 +}; + +static struct i2c_board_info __initdata nsa310_i2c_info[] = { + { I2C_BOARD_INFO("adt7476", 0x2e) }, +}; + +static void nsa310_power_off(void) +{ + gpio_set_value(NSA310_GPIO_POWER_OFF, 1); +} + +static int __init nsa310_gpio_request(unsigned int gpio, unsigned long flags, + const char *label) +{ + int err; + + err = gpio_request_one(gpio, flags, label); + if (err) + pr_err("NSA-310: can't setup GPIO%u (%s), err=%d\n", + gpio, label, err); + + return err; +} + +static void __init nsa310_gpio_init(void) +{ + int err; + + err = nsa310_gpio_request(NSA310_GPIO_POWER_OFF, GPIOF_OUT_INIT_LOW, + "Power Off"); + if (!err) + pm_power_off = nsa310_power_off; + + nsa310_gpio_request(NSA310_GPIO_USB_POWER_OFF, GPIOF_OUT_INIT_LOW, + "USB Power Off"); +} + +void __init nsa310_init(void) +{ + u32 dev, rev; + + kirkwood_mpp_conf(nsa310_mpp_config); + + nsa310_gpio_init(); + + kirkwood_pcie_id(&dev, &rev); + + i2c_register_board_info(0, ARRAY_AND_SIZE(nsa310_i2c_info)); +} + +static int __init nsa310_pci_init(void) +{ + if (of_machine_is_compatible("zyxel,nsa310")) + kirkwood_pcie_init(KW_PCIE0); + + return 0; +} + +subsys_initcall(nsa310_pci_init); diff --git a/arch/arm/mach-kirkwood/board-openblocks_a6.c b/arch/arm/mach-kirkwood/board-openblocks_a6.c new file mode 100644 index 00000000000..815fc6451d5 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-openblocks_a6.c @@ -0,0 +1,70 @@ +/* + * Copyright 2012 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * arch/arm/mach-kirkwood/board-openblocks_a6.c + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mv643xx_eth.h> +#include <linux/clk.h> +#include <linux/clk-private.h> +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data openblocks_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static unsigned int openblocks_a6_mpp_config[] __initdata = { + MPP0_NF_IO2, + MPP1_NF_IO3, + MPP2_NF_IO4, + MPP3_NF_IO5, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP6_SYSRST_OUTn, + MPP8_UART1_RTS, + MPP9_UART1_CTS, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP13_UART1_TXD, + MPP14_UART1_RXD, + MPP15_UART0_RTS, + MPP16_UART0_CTS, + MPP18_NF_IO0, + MPP19_NF_IO1, + MPP20_GPIO, /* DIP SW0 */ + MPP21_GPIO, /* DIP SW1 */ + MPP22_GPIO, /* DIP SW2 */ + MPP23_GPIO, /* DIP SW3 */ + MPP24_GPIO, /* GPIO 0 */ + MPP25_GPIO, /* GPIO 1 */ + MPP26_GPIO, /* GPIO 2 */ + MPP27_GPIO, /* GPIO 3 */ + MPP28_GPIO, /* GPIO 4 */ + MPP29_GPIO, /* GPIO 5 */ + MPP30_GPIO, /* GPIO 6 */ + MPP31_GPIO, /* GPIO 7 */ + MPP36_TW1_SDA, + MPP37_TW1_SCK, + MPP38_GPIO, /* INIT */ + MPP39_GPIO, /* USB OC */ + MPP41_GPIO, /* LED: Red */ + MPP42_GPIO, /* LED: Green */ + MPP43_GPIO, /* LED: Yellow */ + 0, +}; + +void __init openblocks_a6_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(openblocks_a6_mpp_config); + kirkwood_ge00_init(&openblocks_ge00_data); +} diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c index 1750e68506c..329ff682e4e 100644 --- a/arch/arm/mach-kirkwood/board-ts219.c +++ b/arch/arm/mach-kirkwood/board-ts219.c @@ -26,47 +26,21 @@ #include <asm/mach/arch.h> #include <mach/kirkwood.h> #include "common.h" -#include "mpp.h" #include "tsx1x-common.h" static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -static unsigned int qnap_ts219_mpp_config[] __initdata = { - MPP0_SPI_SCn, - MPP1_SPI_MOSI, - MPP2_SPI_SCK, - MPP3_SPI_MISO, - MPP4_SATA1_ACTn, - MPP5_SATA0_ACTn, - MPP8_TW0_SDA, - MPP9_TW0_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP13_UART1_TXD, /* PIC controller */ - MPP14_UART1_RXD, /* PIC controller */ - MPP15_GPIO, /* USB Copy button (on devices with 88F6281) */ - MPP16_GPIO, /* Reset button (on devices with 88F6281) */ - MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */ - MPP37_GPIO, /* Reset button (on devices with 88F6282) */ - MPP43_GPIO, /* USB Copy button (on devices with 88F6282) */ - MPP44_GPIO, /* Board ID: 0: TS-11x, 1: TS-21x */ - 0 -}; - void __init qnap_dt_ts219_init(void) { u32 dev, rev; - kirkwood_mpp_conf(qnap_ts219_mpp_config); - kirkwood_pcie_id(&dev, &rev); if (dev == MV88F6282_DEV_ID) qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); kirkwood_ge00_init(&qnap_ts219_ge00_data); - kirkwood_ehci_init(); pm_power_off = qnap_tsx1x_power_off; } diff --git a/arch/arm/mach-kirkwood/board-usi_topkick.c b/arch/arm/mach-kirkwood/board-usi_topkick.c new file mode 100644 index 00000000000..15e69fcde9f --- /dev/null +++ b/arch/arm/mach-kirkwood/board-usi_topkick.c @@ -0,0 +1,81 @@ +/* + * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net> + * + * arch/arm/mach-kirkwood/board-usi_topkick.c + * + * USI Topkick Init for drivers not converted to flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mv643xx_eth.h> +#include <linux/gpio.h> +#include <linux/platform_data/mmc-mvsdio.h> +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data topkick_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mvsdio_platform_data topkick_mvsdio_data = { + /* unfortunately the CD signal has not been connected */ +}; + +/* + * GPIO LED layout + * + * /-SYS_LED(2) + * | + * | /-DISK_LED + * | | + * | | /-WLAN_LED(2) + * | | | + * [SW] [*] [*] [*] + */ + +/* + * Switch positions + * + * /-SW_LEFT + * | + * | /-SW_IDLE + * | | + * | | /-SW_RIGHT + * | | | + * PS [L] [I] [R] LEDS + */ + +static unsigned int topkick_mpp_config[] __initdata = { + MPP21_GPIO, /* DISK_LED (low active) - yellow */ + MPP36_GPIO, /* SATA0 power enable (high active) */ + MPP37_GPIO, /* SYS_LED2 (low active) - red */ + MPP38_GPIO, /* SYS_LED (low active) - blue */ + MPP39_GPIO, /* WLAN_LED (low active) - green */ + MPP43_GPIO, /* SW_LEFT (low active) */ + MPP44_GPIO, /* SW_RIGHT (low active) */ + MPP45_GPIO, /* SW_IDLE (low active) */ + MPP46_GPIO, /* SW_LEFT (low active) */ + MPP48_GPIO, /* WLAN_LED2 (low active) - yellow */ + 0 +}; + +#define TOPKICK_SATA0_PWR_ENABLE 36 + +void __init usi_topkick_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(topkick_mpp_config); + + /* SATA0 power enable */ + gpio_set_value(TOPKICK_SATA0_PWR_ENABLE, 1); + + kirkwood_ge00_init(&topkick_ge00_data); + kirkwood_sdio_init(&topkick_mvsdio_data); +} diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 2c6c218fb79..906c22eca4e 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -266,6 +266,7 @@ void __init kirkwood_clk_init(void) orion_clkdev_add("1", "pcie", pex1); orion_clkdev_add(NULL, "kirkwood-i2s", audio); orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".0", runit); + orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".1", runit); /* Marvell says runit is used by SPI, UART, NAND, TWSI, ..., * so should never be gated. diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index bcffd7ca1ca..3e079d1d99d 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -112,6 +112,40 @@ void km_kirkwood_init(void); static inline void km_kirkwood_init(void) {}; #endif +#ifdef CONFIG_MACH_MPLCEC4_DT +void mplcec4_init(void); +#else +static inline void mplcec4_init(void) {}; +#endif + +#if defined(CONFIG_MACH_INETSPACE_V2_DT) || \ + defined(CONFIG_MACH_NETSPACE_V2_DT) || \ + defined(CONFIG_MACH_NETSPACE_MAX_V2_DT) || \ + defined(CONFIG_MACH_NETSPACE_LITE_V2_DT) || \ + defined(CONFIG_MACH_NETSPACE_MINI_V2_DT) +void ns2_init(void); +#else +static inline void ns2_init(void) {}; +#endif + +#ifdef CONFIG_MACH_NSA310_DT +void nsa310_init(void); +#else +static inline void nsa310_init(void) {}; +#endif + +#ifdef CONFIG_MACH_OPENBLOCKS_A6_DT +void openblocks_a6_init(void); +#else +static inline void openblocks_a6_init(void) {}; +#endif + +#ifdef CONFIG_MACH_TOPKICK_DT +void usi_topkick_init(void); +#else +static inline void usi_topkick_init(void) {}; +#endif + /* early init functions not converted to fdt yet */ char *kirkwood_id(void); void kirkwood_l2_init(void); diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c index b56d06b4878..95192a062d5 100644 --- a/arch/arm/mach-omap2/clockdomains44xx_data.c +++ b/arch/arm/mach-omap2/clockdomains44xx_data.c @@ -359,7 +359,7 @@ static struct clockdomain iss_44xx_clkdm = { .clkdm_offs = OMAP4430_CM2_CAM_CAM_CDOFFS, .wkdep_srcs = iss_wkup_sleep_deps, .sleepdep_srcs = iss_wkup_sleep_deps, - .flags = CLKDM_CAN_HWSUP_SWSUP, + .flags = CLKDM_CAN_SWSUP, }; static struct clockdomain l3_dss_44xx_clkdm = { diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index cf365c387c0..d2215e9873a 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -19,6 +19,7 @@ #include <linux/of.h> #include <linux/pinctrl/machine.h> #include <linux/platform_data/omap4-keypad.h> +#include <linux/platform_data/omap_ocp2scp.h> #include <asm/mach-types.h> #include <asm/mach/map.h> @@ -615,6 +616,83 @@ static void omap_init_vout(void) static inline void omap_init_vout(void) {} #endif +#if defined(CONFIG_OMAP_OCP2SCP) || defined(CONFIG_OMAP_OCP2SCP_MODULE) +static int count_ocp2scp_devices(struct omap_ocp2scp_dev *ocp2scp_dev) +{ + int cnt = 0; + + while (ocp2scp_dev->drv_name != NULL) { + cnt++; + ocp2scp_dev++; + } + + return cnt; +} + +static void omap_init_ocp2scp(void) +{ + struct omap_hwmod *oh; + struct platform_device *pdev; + int bus_id = -1, dev_cnt = 0, i; + struct omap_ocp2scp_dev *ocp2scp_dev; + const char *oh_name, *name; + struct omap_ocp2scp_platform_data *pdata; + + if (!cpu_is_omap44xx()) + return; + + oh_name = "ocp2scp_usb_phy"; + name = "omap-ocp2scp"; + + oh = omap_hwmod_lookup(oh_name); + if (!oh) { + pr_err("%s: could not find omap_hwmod for %s\n", __func__, + oh_name); + return; + } + + pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + pr_err("%s: No memory for ocp2scp pdata\n", __func__); + return; + } + + ocp2scp_dev = oh->dev_attr; + dev_cnt = count_ocp2scp_devices(ocp2scp_dev); + + if (!dev_cnt) { + pr_err("%s: No devices connected to ocp2scp\n", __func__); + kfree(pdata); + return; + } + + pdata->devices = kzalloc(sizeof(struct omap_ocp2scp_dev *) + * dev_cnt, GFP_KERNEL); + if (!pdata->devices) { + pr_err("%s: No memory for ocp2scp pdata devices\n", __func__); + kfree(pdata); + return; + } + + for (i = 0; i < dev_cnt; i++, ocp2scp_dev++) + pdata->devices[i] = ocp2scp_dev; + + pdata->dev_cnt = dev_cnt; + + pdev = omap_device_build(name, bus_id, oh, pdata, sizeof(*pdata), NULL, + 0, false); + if (IS_ERR(pdev)) { + pr_err("Could not build omap_device for %s %s\n", + name, oh_name); + kfree(pdata->devices); + kfree(pdata); + return; + } +} +#else +static inline void omap_init_ocp2scp(void) { } +#endif + /*-------------------------------------------------------------------------*/ static int __init omap2_init_devices(void) @@ -642,6 +720,7 @@ static int __init omap2_init_devices(void) omap_init_sham(); omap_init_aes(); omap_init_vout(); + omap_init_ocp2scp(); return 0; } diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 139adca3bda..b3b00f43dd7 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -420,6 +420,38 @@ static int _set_softreset(struct omap_hwmod *oh, u32 *v) } /** + * _wait_softreset_complete - wait for an OCP softreset to complete + * @oh: struct omap_hwmod * to wait on + * + * Wait until the IP block represented by @oh reports that its OCP + * softreset is complete. This can be triggered by software (see + * _ocp_softreset()) or by hardware upon returning from off-mode (one + * example is HSMMC). Waits for up to MAX_MODULE_SOFTRESET_WAIT + * microseconds. Returns the number of microseconds waited. + */ +static int _wait_softreset_complete(struct omap_hwmod *oh) +{ + struct omap_hwmod_class_sysconfig *sysc; + u32 softrst_mask; + int c = 0; + + sysc = oh->class->sysc; + + if (sysc->sysc_flags & SYSS_HAS_RESET_STATUS) + omap_test_timeout((omap_hwmod_read(oh, sysc->syss_offs) + & SYSS_RESETDONE_MASK), + MAX_MODULE_SOFTRESET_WAIT, c); + else if (sysc->sysc_flags & SYSC_HAS_RESET_STATUS) { + softrst_mask = (0x1 << sysc->sysc_fields->srst_shift); + omap_test_timeout(!(omap_hwmod_read(oh, sysc->sysc_offs) + & softrst_mask), + MAX_MODULE_SOFTRESET_WAIT, c); + } + + return c; +} + +/** * _set_dmadisable: set OCP_SYSCONFIG.DMADISABLE bit in @v * @oh: struct omap_hwmod * * @@ -1280,6 +1312,18 @@ static void _enable_sysc(struct omap_hwmod *oh) if (!oh->class->sysc) return; + /* + * Wait until reset has completed, this is needed as the IP + * block is reset automatically by hardware in some cases + * (off-mode for example), and the drivers require the + * IP to be ready when they access it + */ + if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET) + _enable_optional_clocks(oh); + _wait_softreset_complete(oh); + if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET) + _disable_optional_clocks(oh); + v = oh->_sysc_cache; sf = oh->class->sysc->sysc_flags; @@ -1802,7 +1846,7 @@ static int _am33xx_disable_module(struct omap_hwmod *oh) */ static int _ocp_softreset(struct omap_hwmod *oh) { - u32 v, softrst_mask; + u32 v; int c = 0; int ret = 0; @@ -1832,19 +1876,7 @@ static int _ocp_softreset(struct omap_hwmod *oh) if (oh->class->sysc->srst_udelay) udelay(oh->class->sysc->srst_udelay); - if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS) - omap_test_timeout((omap_hwmod_read(oh, - oh->class->sysc->syss_offs) - & SYSS_RESETDONE_MASK), - MAX_MODULE_SOFTRESET_WAIT, c); - else if (oh->class->sysc->sysc_flags & SYSC_HAS_RESET_STATUS) { - softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift); - omap_test_timeout(!(omap_hwmod_read(oh, - oh->class->sysc->sysc_offs) - & softrst_mask), - MAX_MODULE_SOFTRESET_WAIT, c); - } - + c = _wait_softreset_complete(oh); if (c == MAX_MODULE_SOFTRESET_WAIT) pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n", oh->name, MAX_MODULE_SOFTRESET_WAIT); @@ -2351,6 +2383,9 @@ static int __init _setup_reset(struct omap_hwmod *oh) if (oh->_state != _HWMOD_STATE_INITIALIZED) return -EINVAL; + if (oh->flags & HWMOD_EXT_OPT_MAIN_CLK) + return -EPERM; + if (oh->rst_lines_cnt == 0) { r = _enable(oh); if (r) { diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 87b59b45c67..87a3c5b7aa7 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -442,6 +442,11 @@ struct omap_hwmod_omap4_prcm { * in order to complete the reset. Optional clocks will be disabled * again after the reset. * HWMOD_16BIT_REG: Module has 16bit registers + * HWMOD_EXT_OPT_MAIN_CLK: The only main functional clock source for + * this IP block comes from an off-chip source and is not always + * enabled. This prevents the hwmod code from being able to + * enable and reset the IP block early. XXX Eventually it should + * be possible to query the clock framework for this information. */ #define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_MSTANDBY (1 << 1) @@ -452,6 +457,7 @@ struct omap_hwmod_omap4_prcm { #define HWMOD_NO_IDLEST (1 << 6) #define HWMOD_CONTROL_OPT_CLKS_IN_RESET (1 << 7) #define HWMOD_16BIT_REG (1 << 8) +#define HWMOD_EXT_OPT_MAIN_CLK (1 << 9) /* * omap_hwmod._int_flags definitions diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 7a6132848f5..b80bbf607ef 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -25,6 +25,7 @@ #include <plat-omap/dma-omap.h> +#include <linux/platform_data/omap_ocp2scp.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/platform_data/asoc-ti-mcbsp.h> #include <plat/dmtimer.h> @@ -2126,6 +2127,14 @@ static struct omap_hwmod omap44xx_mcpdm_hwmod = { .name = "mcpdm", .class = &omap44xx_mcpdm_hwmod_class, .clkdm_name = "abe_clkdm", + /* + * It's suspected that the McPDM requires an off-chip main + * functional clock, controlled via I2C. This IP block is + * currently reset very early during boot, before I2C is + * available, so it doesn't seem that we have any choice in + * the kernel other than to avoid resetting it. + */ + .flags = HWMOD_EXT_OPT_MAIN_CLK, .mpu_irqs = omap44xx_mcpdm_irqs, .sdma_reqs = omap44xx_mcpdm_sdma_reqs, .main_clk = "mcpdm_fck", @@ -2682,6 +2691,32 @@ static struct omap_hwmod_class omap44xx_ocp2scp_hwmod_class = { .sysc = &omap44xx_ocp2scp_sysc, }; +/* ocp2scp dev_attr */ +static struct resource omap44xx_usb_phy_and_pll_addrs[] = { + { + .name = "usb_phy", + .start = 0x4a0ad080, + .end = 0x4a0ae000, + .flags = IORESOURCE_MEM, + }, + { + /* XXX: Remove this once control module driver is in place */ + .name = "ctrl_dev", + .start = 0x4a002300, + .end = 0x4a002303, + .flags = IORESOURCE_MEM, + }, + { } +}; + +static struct omap_ocp2scp_dev ocp2scp_dev_attr[] = { + { + .drv_name = "omap-usb2", + .res = omap44xx_usb_phy_and_pll_addrs, + }, + { } +}; + /* ocp2scp_usb_phy */ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = { .name = "ocp2scp_usb_phy", @@ -2695,6 +2730,7 @@ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = { .modulemode = MODULEMODE_HWCTRL, }, }, + .dev_attr = ocp2scp_dev_attr, }; /* diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 827f54a1dd1..3fa2bdb4410 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -363,7 +363,7 @@ static struct regulator_init_data omap4_clk32kg_idata = { }; static struct regulator_consumer_supply omap4_vdd1_supply[] = { - REGULATOR_SUPPLY("vcc", "mpu.0"), + REGULATOR_SUPPLY("vcc", "cpu0"), }; static struct regulator_consumer_supply omap4_vdd2_supply[] = { diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 880249b1701..75878c37959 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -264,7 +264,7 @@ static void __init omap_vc_i2c_init(struct voltagedomain *voltdm) if (initialized) { if (voltdm->pmic->i2c_high_speed != i2c_high_speed) - pr_warn("%s: I2C config for vdd_%s does not match other channels (%u).", + pr_warn("%s: I2C config for vdd_%s does not match other channels (%u).\n", __func__, voltdm->name, i2c_high_speed); return; } diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index 0673f0c1043..2cb2f06c20f 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -2,6 +2,13 @@ if ARCH_ORION5X menu "Orion Implementations" +config ARCH_ORION5X_DT + bool "Marvell Orion5x Flattened Device Tree" + select USE_OF + help + Say 'Y' here if you want your kernel to support the + Marvell Orion5x using flattened device tree. + config MACH_DB88F5281 bool "Marvell Orion-2 Development Board" select I2C_BOARDINFO @@ -96,12 +103,13 @@ config MACH_MV2120 Say 'Y' here if you want your kernel to support the HP Media Vault mv2120 or mv5100. -config MACH_EDMINI_V2 - bool "LaCie Ethernet Disk mini V2" +config MACH_EDMINI_V2_DT + bool "LaCie Ethernet Disk mini V2 (Flattened Device Tree)" select I2C_BOARDINFO + select ARCH_ORION5X_DT help Say 'Y' here if you want your kernel to support the - LaCie Ethernet Disk mini V2. + LaCie Ethernet Disk mini V2 (Flattened Device Tree). config MACH_D2NET bool "LaCie d2 Network" diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile index 7f18cdacd48..9e809a7c05c 100644 --- a/arch/arm/mach-orion5x/Makefile +++ b/arch/arm/mach-orion5x/Makefile @@ -12,7 +12,6 @@ obj-$(CONFIG_MACH_TS409) += ts409-setup.o tsx09-common.o obj-$(CONFIG_MACH_WRT350N_V2) += wrt350n-v2-setup.o obj-$(CONFIG_MACH_TS78XX) += ts78xx-setup.o obj-$(CONFIG_MACH_MV2120) += mv2120-setup.o -obj-$(CONFIG_MACH_EDMINI_V2) += edmini_v2-setup.o obj-$(CONFIG_MACH_D2NET) += d2net-setup.o obj-$(CONFIG_MACH_BIGDISK) += d2net-setup.o obj-$(CONFIG_MACH_NET2BIG) += net2big-setup.o @@ -22,3 +21,6 @@ obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o obj-$(CONFIG_MACH_RD88F5181L_FXO) += rd88f5181l-fxo-setup.o obj-$(CONFIG_MACH_RD88F6183AP_GE) += rd88f6183ap-ge-setup.o obj-$(CONFIG_MACH_LINKSTATION_LSCHL) += ls-chl-setup.o + +obj-$(CONFIG_ARCH_ORION5X_DT) += board-dt.o +obj-$(CONFIG_MACH_EDMINI_V2_DT) += edmini_v2-setup.o diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c new file mode 100644 index 00000000000..32e5c211a89 --- /dev/null +++ b/arch/arm/mach-orion5x/board-dt.c @@ -0,0 +1,79 @@ +/* + * Copyright 2012 (C), Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * arch/arm/mach-orion5x/board-dt.c + * + * Flattened Device Tree board initialization + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <asm/system_misc.h> +#include <asm/mach/arch.h> +#include <mach/orion5x.h> +#include <plat/irq.h> +#include "common.h" + +struct of_dev_auxdata orion5x_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL), + OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0", + NULL), + OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL), + OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL), + OF_DEV_AUXDATA("marvell,orion-crypto", 0xf1090000, "mv_crypto", NULL), + {}, +}; + +static void __init orion5x_dt_init(void) +{ + char *dev_name; + u32 dev, rev; + + orion5x_id(&dev, &rev, &dev_name); + printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, orion5x_tclk); + + /* + * Setup Orion address map + */ + orion5x_setup_cpu_mbus_bridge(); + + /* Setup root of clk tree */ + clk_init(); + + /* + * Don't issue "Wait for Interrupt" instruction if we are + * running on D0 5281 silicon. + */ + if (dev == MV88F5281_DEV_ID && rev == MV88F5281_REV_D0) { + printk(KERN_INFO "Orion: Applying 5281 D0 WFI workaround.\n"); + disable_hlt(); + } + + if (of_machine_is_compatible("lacie,ethernet-disk-mini-v2")) + edmini_v2_init(); + + of_platform_populate(NULL, of_default_bus_match_table, + orion5x_auxdata_lookup, NULL); +} + +static const char *orion5x_dt_compat[] = { + "marvell,orion5x", + NULL, +}; + +DT_MACHINE_START(ORION5X_DT, "Marvell Orion5x (Flattened Device Tree)") + /* Maintainer: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> */ + .map_io = orion5x_map_io, + .init_early = orion5x_init_early, + .init_irq = orion_dt_init_irq, + .timer = &orion5x_timer, + .init_machine = orion5x_dt_init, + .restart = orion5x_restart, + .dt_compat = orion5x_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index b3eb3da0116..550f92320af 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -65,7 +65,7 @@ void __init orion5x_map_io(void) ****************************************************************************/ static struct clk *tclk; -static void __init clk_init(void) +void __init clk_init(void) { tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT, orion5x_tclk); @@ -236,7 +236,7 @@ struct sys_timer orion5x_timer = { /* * Identify device ID and rev from PCIe configuration header space '0'. */ -static void __init orion5x_id(u32 *dev, u32 *rev, char **dev_name) +void __init orion5x_id(u32 *dev, u32 *rev, char **dev_name) { orion5x_pcie_id(dev, rev); diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index 31bab92ce03..7db5cdd9c4b 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -12,6 +12,8 @@ void orion5x_map_io(void); void orion5x_init_early(void); void orion5x_init_irq(void); void orion5x_init(void); +void orion5x_id(u32 *dev, u32 *rev, char **dev_name); +void clk_init(void); extern int orion5x_tclk; extern struct sys_timer orion5x_timer; @@ -54,6 +56,13 @@ int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys); struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys); int orion5x_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); +/* board init functions for boards not fully converted to fdt */ +#ifdef CONFIG_MACH_EDMINI_V2_DT +void edmini_v2_init(void); +#else +static inline void edmini_v2_init(void) {}; +#endif + struct meminfo; struct tag; extern void __init tag_fixup_mem32(struct tag *, char **, struct meminfo *); diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c index 355e962137c..d675e727803 100644 --- a/arch/arm/mach-orion5x/edmini_v2-setup.c +++ b/arch/arm/mach-orion5x/edmini_v2-setup.c @@ -115,69 +115,6 @@ static struct i2c_board_info __initdata edmini_v2_i2c_rtc = { }; /***************************************************************************** - * Sata - ****************************************************************************/ - -static struct mv_sata_platform_data edmini_v2_sata_data = { - .n_ports = 2, -}; - -/***************************************************************************** - * GPIO LED (simple - doesn't use hardware blinking support) - ****************************************************************************/ - -#define EDMINI_V2_GPIO_LED_POWER 16 - -static struct gpio_led edmini_v2_leds[] = { - { - .name = "power:blue", - .gpio = EDMINI_V2_GPIO_LED_POWER, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data edmini_v2_led_data = { - .num_leds = ARRAY_SIZE(edmini_v2_leds), - .leds = edmini_v2_leds, -}; - -static struct platform_device edmini_v2_gpio_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &edmini_v2_led_data, - }, -}; - -/**************************************************************************** - * GPIO key - ****************************************************************************/ - -#define EDMINI_V2_GPIO_KEY_POWER 18 - -static struct gpio_keys_button edmini_v2_buttons[] = { - { - .code = KEY_POWER, - .gpio = EDMINI_V2_GPIO_KEY_POWER, - .desc = "Power Button", - .active_low = 0, - }, -}; - -static struct gpio_keys_platform_data edmini_v2_button_data = { - .buttons = edmini_v2_buttons, - .nbuttons = ARRAY_SIZE(edmini_v2_buttons), -}; - -static struct platform_device edmini_v2_gpio_buttons = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &edmini_v2_button_data, - }, -}; - -/***************************************************************************** * General Setup ****************************************************************************/ static unsigned int edminiv2_mpp_modes[] __initdata = { @@ -207,13 +144,8 @@ static unsigned int edminiv2_mpp_modes[] __initdata = { 0, }; -static void __init edmini_v2_init(void) +void __init edmini_v2_init(void) { - /* - * Setup basic Orion functions. Need to be called early. - */ - orion5x_init(); - orion5x_mpp_conf(edminiv2_mpp_modes); /* @@ -221,15 +153,10 @@ static void __init edmini_v2_init(void) */ orion5x_ehci0_init(); orion5x_eth_init(&edmini_v2_eth_data); - orion5x_i2c_init(); - orion5x_sata_init(&edmini_v2_sata_data); - orion5x_uart0_init(); orion5x_setup_dev_boot_win(EDMINI_V2_NOR_BOOT_BASE, EDMINI_V2_NOR_BOOT_SIZE); platform_device_register(&edmini_v2_nor_flash); - platform_device_register(&edmini_v2_gpio_leds); - platform_device_register(&edmini_v2_gpio_buttons); pr_notice("edmini_v2: USB device port, flash write and power-off " "are not yet supported.\n"); @@ -247,16 +174,3 @@ static void __init edmini_v2_init(void) i2c_register_board_info(0, &edmini_v2_i2c_rtc, 1); } - -/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */ -MACHINE_START(EDMINI_V2, "LaCie Ethernet Disk mini V2") - /* Maintainer: Christopher Moore <moore@free.fr> */ - .atag_offset = 0x100, - .init_machine = edmini_v2_init, - .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion5x_init_irq, - .timer = &orion5x_timer, - .fixup = tag_fixup_mem32, - .restart = orion5x_restart, -MACHINE_END diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index 5ecbd17b564..e2c6391863f 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -28,6 +28,7 @@ #include <linux/mfd/asic3.h> #include <linux/mtd/physmap.h> #include <linux/pda_power.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/regulator/driver.h> #include <linux/regulator/gpio-regulator.h> @@ -556,7 +557,7 @@ static struct platform_device hx4700_lcd = { */ static struct platform_pwm_backlight_data backlight_data = { - .pwm_id = 1, + .pwm_id = -1, /* Superseded by pwm_lookup */ .max_brightness = 200, .dft_brightness = 100, .pwm_period_ns = 30923, @@ -571,6 +572,10 @@ static struct platform_device backlight = { }, }; +static struct pwm_lookup hx4700_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.1", 0, "pwm-backlight", NULL), +}; + /* * USB "Transceiver" */ @@ -872,6 +877,7 @@ static void __init hx4700_init(void) pxa_set_stuart_info(NULL); platform_add_devices(devices, ARRAY_SIZE(devices)); + pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup)); pxa_set_ficp_info(&ficp_info); pxa27x_set_i2c_power_info(NULL); diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 438f02fe122..842596d4d31 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -86,10 +86,7 @@ static void spitz_discharge1(int on) gpio_set_value(SPITZ_GPIO_LED_GREEN, on); } -static unsigned long gpio18_config[] = { - GPIO18_RDY, - GPIO18_GPIO, -}; +static unsigned long gpio18_config = GPIO18_GPIO; static void spitz_presuspend(void) { @@ -112,7 +109,7 @@ static void spitz_presuspend(void) PGSR3 &= ~SPITZ_GPIO_G3_STROBE_BIT; PGSR2 |= GPIO_bit(SPITZ_GPIO_KEY_STROBE0); - pxa2xx_mfp_config(&gpio18_config[0], 1); + pxa2xx_mfp_config(&gpio18_config, 1); gpio_request_one(18, GPIOF_OUT_INIT_HIGH, "Unknown"); gpio_free(18); @@ -131,7 +128,6 @@ static void spitz_presuspend(void) static void spitz_postsuspend(void) { - pxa2xx_mfp_config(&gpio18_config[1], 1); } static int spitz_should_wakeup(unsigned int resume_on_alarm) diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c index 1867944415c..8db0b981ca6 100644 --- a/arch/arm/plat-orion/irq.c +++ b/arch/arm/plat-orion/irq.c @@ -41,7 +41,7 @@ void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr) static int __init orion_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { - int i = 0, irq_gpio; + int i = 0; void __iomem *base; do { @@ -54,10 +54,6 @@ static int __init orion_add_irq_domain(struct device_node *np, irq_domain_add_legacy(np, i * 32, 0, 0, &irq_domain_simple_ops, NULL); - - irq_gpio = i * 32; - orion_gpio_of_init(irq_gpio); - return 0; } diff --git a/arch/arm/tools/Makefile b/arch/arm/tools/Makefile index cd60a81163e..32d05c8219d 100644 --- a/arch/arm/tools/Makefile +++ b/arch/arm/tools/Makefile @@ -5,6 +5,6 @@ # include/generated/mach-types.h: $(src)/gen-mach-types $(src)/mach-types - $(kecho) ' Generating $@' + @$(kecho) ' Generating $@' @mkdir -p $(dir $@) $(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; } diff --git a/arch/arm64/include/asm/io.h b/arch/arm64/include/asm/io.h index 54f6116697f..d2f05a60827 100644 --- a/arch/arm64/include/asm/io.h +++ b/arch/arm64/include/asm/io.h @@ -222,7 +222,7 @@ extern void __iomem *__ioremap(phys_addr_t phys_addr, size_t size, pgprot_t prot extern void __iounmap(volatile void __iomem *addr); #define PROT_DEFAULT (PTE_TYPE_PAGE | PTE_AF | PTE_DIRTY) -#define PROT_DEVICE_nGnRE (PROT_DEFAULT | PTE_XN | PTE_ATTRINDX(MT_DEVICE_nGnRE)) +#define PROT_DEVICE_nGnRE (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_DEVICE_nGnRE)) #define PROT_NORMAL_NC (PROT_DEFAULT | PTE_ATTRINDX(MT_NORMAL_NC)) #define ioremap(addr, size) __ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE)) diff --git a/arch/arm64/include/asm/pgtable-hwdef.h b/arch/arm64/include/asm/pgtable-hwdef.h index 0f3b4581d92..75fd13d289b 100644 --- a/arch/arm64/include/asm/pgtable-hwdef.h +++ b/arch/arm64/include/asm/pgtable-hwdef.h @@ -38,7 +38,8 @@ #define PMD_SECT_S (_AT(pmdval_t, 3) << 8) #define PMD_SECT_AF (_AT(pmdval_t, 1) << 10) #define PMD_SECT_NG (_AT(pmdval_t, 1) << 11) -#define PMD_SECT_XN (_AT(pmdval_t, 1) << 54) +#define PMD_SECT_PXN (_AT(pmdval_t, 1) << 53) +#define PMD_SECT_UXN (_AT(pmdval_t, 1) << 54) /* * AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers). @@ -57,7 +58,8 @@ #define PTE_SHARED (_AT(pteval_t, 3) << 8) /* SH[1:0], inner shareable */ #define PTE_AF (_AT(pteval_t, 1) << 10) /* Access Flag */ #define PTE_NG (_AT(pteval_t, 1) << 11) /* nG */ -#define PTE_XN (_AT(pteval_t, 1) << 54) /* XN */ +#define PTE_PXN (_AT(pteval_t, 1) << 53) /* Privileged XN */ +#define PTE_UXN (_AT(pteval_t, 1) << 54) /* User XN */ /* * AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers). diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index 8960239be72..14aba2db677 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -62,23 +62,23 @@ extern pgprot_t pgprot_default; #define _MOD_PROT(p, b) __pgprot(pgprot_val(p) | (b)) -#define PAGE_NONE _MOD_PROT(pgprot_default, PTE_NG | PTE_XN | PTE_RDONLY) -#define PAGE_SHARED _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_XN) -#define PAGE_SHARED_EXEC _MOD_PROT(pgprot_default, PTE_USER | PTE_NG) -#define PAGE_COPY _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_XN | PTE_RDONLY) -#define PAGE_COPY_EXEC _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_RDONLY) -#define PAGE_READONLY _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_XN | PTE_RDONLY) -#define PAGE_READONLY_EXEC _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_RDONLY) -#define PAGE_KERNEL _MOD_PROT(pgprot_default, PTE_XN | PTE_DIRTY) -#define PAGE_KERNEL_EXEC _MOD_PROT(pgprot_default, PTE_DIRTY) - -#define __PAGE_NONE __pgprot(_PAGE_DEFAULT | PTE_NG | PTE_XN | PTE_RDONLY) -#define __PAGE_SHARED __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_XN) -#define __PAGE_SHARED_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG) -#define __PAGE_COPY __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_XN | PTE_RDONLY) -#define __PAGE_COPY_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_RDONLY) -#define __PAGE_READONLY __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_XN | PTE_RDONLY) -#define __PAGE_READONLY_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_RDONLY) +#define PAGE_NONE _MOD_PROT(pgprot_default, PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY) +#define PAGE_SHARED _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_UXN) +#define PAGE_SHARED_EXEC _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN) +#define PAGE_COPY _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY) +#define PAGE_COPY_EXEC _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_RDONLY) +#define PAGE_READONLY _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY) +#define PAGE_READONLY_EXEC _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_RDONLY) +#define PAGE_KERNEL _MOD_PROT(pgprot_default, PTE_PXN | PTE_UXN | PTE_DIRTY) +#define PAGE_KERNEL_EXEC _MOD_PROT(pgprot_default, PTE_UXN | PTE_DIRTY) + +#define __PAGE_NONE __pgprot(_PAGE_DEFAULT | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY) +#define __PAGE_SHARED __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN) +#define __PAGE_SHARED_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN) +#define __PAGE_COPY __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY) +#define __PAGE_COPY_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_RDONLY) +#define __PAGE_READONLY __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY) +#define __PAGE_READONLY_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_RDONLY) #endif /* __ASSEMBLY__ */ @@ -130,10 +130,10 @@ extern struct page *empty_zero_page; #define pte_young(pte) (pte_val(pte) & PTE_AF) #define pte_special(pte) (pte_val(pte) & PTE_SPECIAL) #define pte_write(pte) (!(pte_val(pte) & PTE_RDONLY)) -#define pte_exec(pte) (!(pte_val(pte) & PTE_XN)) +#define pte_exec(pte) (!(pte_val(pte) & PTE_UXN)) #define pte_present_exec_user(pte) \ - ((pte_val(pte) & (PTE_VALID | PTE_USER | PTE_XN)) == \ + ((pte_val(pte) & (PTE_VALID | PTE_USER | PTE_UXN)) == \ (PTE_VALID | PTE_USER)) #define PTE_BIT_FUNC(fn,op) \ @@ -262,7 +262,7 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr) static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) { - const pteval_t mask = PTE_USER | PTE_XN | PTE_RDONLY; + const pteval_t mask = PTE_USER | PTE_PXN | PTE_UXN | PTE_RDONLY; pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask); return pte; } diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c index acd5b68e887..082e383c1b6 100644 --- a/arch/ia64/mm/init.c +++ b/arch/ia64/mm/init.c @@ -637,7 +637,6 @@ mem_init (void) high_memory = __va(max_low_pfn * PAGE_SIZE); - reset_zone_present_pages(); for_each_online_pgdat(pgdat) if (pgdat->bdata->node_bootmem_map) totalram_pages += free_all_bootmem_node(pgdat); diff --git a/arch/mips/cavium-octeon/executive/cvmx-l2c.c b/arch/mips/cavium-octeon/executive/cvmx-l2c.c index d38246e33dd..9f883bf7695 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-l2c.c +++ b/arch/mips/cavium-octeon/executive/cvmx-l2c.c @@ -30,6 +30,7 @@ * measurement, and debugging facilities. */ +#include <linux/irqflags.h> #include <asm/octeon/cvmx.h> #include <asm/octeon/cvmx-l2c.h> #include <asm/octeon/cvmx-spinlock.h> diff --git a/arch/mips/fw/arc/misc.c b/arch/mips/fw/arc/misc.c index 7cf80ca2c1d..f9f5307434c 100644 --- a/arch/mips/fw/arc/misc.c +++ b/arch/mips/fw/arc/misc.c @@ -11,6 +11,7 @@ */ #include <linux/init.h> #include <linux/kernel.h> +#include <linux/irqflags.h> #include <asm/bcache.h> diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h index 82ad35ce2b4..46ac73abd5e 100644 --- a/arch/mips/include/asm/bitops.h +++ b/arch/mips/include/asm/bitops.h @@ -14,7 +14,6 @@ #endif #include <linux/compiler.h> -#include <linux/irqflags.h> #include <linux/types.h> #include <asm/barrier.h> #include <asm/byteorder.h> /* sigh ... */ @@ -44,6 +43,24 @@ #define smp_mb__before_clear_bit() smp_mb__before_llsc() #define smp_mb__after_clear_bit() smp_llsc_mb() + +/* + * These are the "slower" versions of the functions and are in bitops.c. + * These functions call raw_local_irq_{save,restore}(). + */ +void __mips_set_bit(unsigned long nr, volatile unsigned long *addr); +void __mips_clear_bit(unsigned long nr, volatile unsigned long *addr); +void __mips_change_bit(unsigned long nr, volatile unsigned long *addr); +int __mips_test_and_set_bit(unsigned long nr, + volatile unsigned long *addr); +int __mips_test_and_set_bit_lock(unsigned long nr, + volatile unsigned long *addr); +int __mips_test_and_clear_bit(unsigned long nr, + volatile unsigned long *addr); +int __mips_test_and_change_bit(unsigned long nr, + volatile unsigned long *addr); + + /* * set_bit - Atomically set a bit in memory * @nr: the bit to set @@ -57,7 +74,7 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr) { unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned short bit = nr & SZLONG_MASK; + int bit = nr & SZLONG_MASK; unsigned long temp; if (kernel_uses_llsc && R10000_LLSC_WAR) { @@ -92,17 +109,8 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr) : "=&r" (temp), "+m" (*m) : "ir" (1UL << bit)); } while (unlikely(!temp)); - } else { - volatile unsigned long *a = addr; - unsigned long mask; - unsigned long flags; - - a += nr >> SZLONG_LOG; - mask = 1UL << bit; - raw_local_irq_save(flags); - *a |= mask; - raw_local_irq_restore(flags); - } + } else + __mips_set_bit(nr, addr); } /* @@ -118,7 +126,7 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr) static inline void clear_bit(unsigned long nr, volatile unsigned long *addr) { unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned short bit = nr & SZLONG_MASK; + int bit = nr & SZLONG_MASK; unsigned long temp; if (kernel_uses_llsc && R10000_LLSC_WAR) { @@ -153,17 +161,8 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr) : "=&r" (temp), "+m" (*m) : "ir" (~(1UL << bit))); } while (unlikely(!temp)); - } else { - volatile unsigned long *a = addr; - unsigned long mask; - unsigned long flags; - - a += nr >> SZLONG_LOG; - mask = 1UL << bit; - raw_local_irq_save(flags); - *a &= ~mask; - raw_local_irq_restore(flags); - } + } else + __mips_clear_bit(nr, addr); } /* @@ -191,7 +190,7 @@ static inline void clear_bit_unlock(unsigned long nr, volatile unsigned long *ad */ static inline void change_bit(unsigned long nr, volatile unsigned long *addr) { - unsigned short bit = nr & SZLONG_MASK; + int bit = nr & SZLONG_MASK; if (kernel_uses_llsc && R10000_LLSC_WAR) { unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); @@ -220,17 +219,8 @@ static inline void change_bit(unsigned long nr, volatile unsigned long *addr) : "=&r" (temp), "+m" (*m) : "ir" (1UL << bit)); } while (unlikely(!temp)); - } else { - volatile unsigned long *a = addr; - unsigned long mask; - unsigned long flags; - - a += nr >> SZLONG_LOG; - mask = 1UL << bit; - raw_local_irq_save(flags); - *a ^= mask; - raw_local_irq_restore(flags); - } + } else + __mips_change_bit(nr, addr); } /* @@ -244,7 +234,7 @@ static inline void change_bit(unsigned long nr, volatile unsigned long *addr) static inline int test_and_set_bit(unsigned long nr, volatile unsigned long *addr) { - unsigned short bit = nr & SZLONG_MASK; + int bit = nr & SZLONG_MASK; unsigned long res; smp_mb__before_llsc(); @@ -281,18 +271,8 @@ static inline int test_and_set_bit(unsigned long nr, } while (unlikely(!res)); res = temp & (1UL << bit); - } else { - volatile unsigned long *a = addr; - unsigned long mask; - unsigned long flags; - - a += nr >> SZLONG_LOG; - mask = 1UL << bit; - raw_local_irq_save(flags); - res = (mask & *a); - *a |= mask; - raw_local_irq_restore(flags); - } + } else + res = __mips_test_and_set_bit(nr, addr); smp_llsc_mb(); @@ -310,7 +290,7 @@ static inline int test_and_set_bit(unsigned long nr, static inline int test_and_set_bit_lock(unsigned long nr, volatile unsigned long *addr) { - unsigned short bit = nr & SZLONG_MASK; + int bit = nr & SZLONG_MASK; unsigned long res; if (kernel_uses_llsc && R10000_LLSC_WAR) { @@ -345,18 +325,8 @@ static inline int test_and_set_bit_lock(unsigned long nr, } while (unlikely(!res)); res = temp & (1UL << bit); - } else { - volatile unsigned long *a = addr; - unsigned long mask; - unsigned long flags; - - a += nr >> SZLONG_LOG; - mask = 1UL << bit; - raw_local_irq_save(flags); - res = (mask & *a); - *a |= mask; - raw_local_irq_restore(flags); - } + } else + res = __mips_test_and_set_bit_lock(nr, addr); smp_llsc_mb(); @@ -373,7 +343,7 @@ static inline int test_and_set_bit_lock(unsigned long nr, static inline int test_and_clear_bit(unsigned long nr, volatile unsigned long *addr) { - unsigned short bit = nr & SZLONG_MASK; + int bit = nr & SZLONG_MASK; unsigned long res; smp_mb__before_llsc(); @@ -428,18 +398,8 @@ static inline int test_and_clear_bit(unsigned long nr, } while (unlikely(!res)); res = temp & (1UL << bit); - } else { - volatile unsigned long *a = addr; - unsigned long mask; - unsigned long flags; - - a += nr >> SZLONG_LOG; - mask = 1UL << bit; - raw_local_irq_save(flags); - res = (mask & *a); - *a &= ~mask; - raw_local_irq_restore(flags); - } + } else + res = __mips_test_and_clear_bit(nr, addr); smp_llsc_mb(); @@ -457,7 +417,7 @@ static inline int test_and_clear_bit(unsigned long nr, static inline int test_and_change_bit(unsigned long nr, volatile unsigned long *addr) { - unsigned short bit = nr & SZLONG_MASK; + int bit = nr & SZLONG_MASK; unsigned long res; smp_mb__before_llsc(); @@ -494,18 +454,8 @@ static inline int test_and_change_bit(unsigned long nr, } while (unlikely(!res)); res = temp & (1UL << bit); - } else { - volatile unsigned long *a = addr; - unsigned long mask; - unsigned long flags; - - a += nr >> SZLONG_LOG; - mask = 1UL << bit; - raw_local_irq_save(flags); - res = (mask & *a); - *a ^= mask; - raw_local_irq_restore(flags); - } + } else + res = __mips_test_and_change_bit(nr, addr); smp_llsc_mb(); diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h index 58277e0e9cd..3c5d1464b7b 100644 --- a/arch/mips/include/asm/compat.h +++ b/arch/mips/include/asm/compat.h @@ -290,7 +290,7 @@ struct compat_shmid64_ds { static inline int is_compat_task(void) { - return test_thread_flag(TIF_32BIT); + return test_thread_flag(TIF_32BIT_ADDR); } #endif /* _ASM_COMPAT_H */ diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h index 29d9c23c20c..ff2e0345e01 100644 --- a/arch/mips/include/asm/io.h +++ b/arch/mips/include/asm/io.h @@ -15,6 +15,7 @@ #include <linux/compiler.h> #include <linux/kernel.h> #include <linux/types.h> +#include <linux/irqflags.h> #include <asm/addrspace.h> #include <asm/bug.h> diff --git a/arch/mips/include/asm/irqflags.h b/arch/mips/include/asm/irqflags.h index 309cbcd6909..9f3384c789d 100644 --- a/arch/mips/include/asm/irqflags.h +++ b/arch/mips/include/asm/irqflags.h @@ -16,83 +16,13 @@ #include <linux/compiler.h> #include <asm/hazards.h> -__asm__( - " .macro arch_local_irq_enable \n" - " .set push \n" - " .set reorder \n" - " .set noat \n" -#ifdef CONFIG_MIPS_MT_SMTC - " mfc0 $1, $2, 1 # SMTC - clear TCStatus.IXMT \n" - " ori $1, 0x400 \n" - " xori $1, 0x400 \n" - " mtc0 $1, $2, 1 \n" -#elif defined(CONFIG_CPU_MIPSR2) - " ei \n" -#else - " mfc0 $1,$12 \n" - " ori $1,0x1f \n" - " xori $1,0x1e \n" - " mtc0 $1,$12 \n" -#endif - " irq_enable_hazard \n" - " .set pop \n" - " .endm"); +#if defined(CONFIG_CPU_MIPSR2) && !defined(CONFIG_MIPS_MT_SMTC) -extern void smtc_ipi_replay(void); - -static inline void arch_local_irq_enable(void) -{ -#ifdef CONFIG_MIPS_MT_SMTC - /* - * SMTC kernel needs to do a software replay of queued - * IPIs, at the cost of call overhead on each local_irq_enable() - */ - smtc_ipi_replay(); -#endif - __asm__ __volatile__( - "arch_local_irq_enable" - : /* no outputs */ - : /* no inputs */ - : "memory"); -} - - -/* - * For cli() we have to insert nops to make sure that the new value - * has actually arrived in the status register before the end of this - * macro. - * R4000/R4400 need three nops, the R4600 two nops and the R10000 needs - * no nops at all. - */ -/* - * For TX49, operating only IE bit is not enough. - * - * If mfc0 $12 follows store and the mfc0 is last instruction of a - * page and fetching the next instruction causes TLB miss, the result - * of the mfc0 might wrongly contain EXL bit. - * - * ERT-TX49H2-027, ERT-TX49H3-012, ERT-TX49HL3-006, ERT-TX49H4-008 - * - * Workaround: mask EXL bit of the result or place a nop before mfc0. - */ __asm__( " .macro arch_local_irq_disable\n" " .set push \n" " .set noat \n" -#ifdef CONFIG_MIPS_MT_SMTC - " mfc0 $1, $2, 1 \n" - " ori $1, 0x400 \n" - " .set noreorder \n" - " mtc0 $1, $2, 1 \n" -#elif defined(CONFIG_CPU_MIPSR2) " di \n" -#else - " mfc0 $1,$12 \n" - " ori $1,0x1f \n" - " xori $1,0x1f \n" - " .set noreorder \n" - " mtc0 $1,$12 \n" -#endif " irq_disable_hazard \n" " .set pop \n" " .endm \n"); @@ -106,46 +36,14 @@ static inline void arch_local_irq_disable(void) : "memory"); } -__asm__( - " .macro arch_local_save_flags flags \n" - " .set push \n" - " .set reorder \n" -#ifdef CONFIG_MIPS_MT_SMTC - " mfc0 \\flags, $2, 1 \n" -#else - " mfc0 \\flags, $12 \n" -#endif - " .set pop \n" - " .endm \n"); - -static inline unsigned long arch_local_save_flags(void) -{ - unsigned long flags; - asm volatile("arch_local_save_flags %0" : "=r" (flags)); - return flags; -} __asm__( " .macro arch_local_irq_save result \n" " .set push \n" " .set reorder \n" " .set noat \n" -#ifdef CONFIG_MIPS_MT_SMTC - " mfc0 \\result, $2, 1 \n" - " ori $1, \\result, 0x400 \n" - " .set noreorder \n" - " mtc0 $1, $2, 1 \n" - " andi \\result, \\result, 0x400 \n" -#elif defined(CONFIG_CPU_MIPSR2) " di \\result \n" " andi \\result, 1 \n" -#else - " mfc0 \\result, $12 \n" - " ori $1, \\result, 0x1f \n" - " xori $1, 0x1f \n" - " .set noreorder \n" - " mtc0 $1, $12 \n" -#endif " irq_disable_hazard \n" " .set pop \n" " .endm \n"); @@ -160,61 +58,37 @@ static inline unsigned long arch_local_irq_save(void) return flags; } + __asm__( " .macro arch_local_irq_restore flags \n" " .set push \n" " .set noreorder \n" " .set noat \n" -#ifdef CONFIG_MIPS_MT_SMTC - "mfc0 $1, $2, 1 \n" - "andi \\flags, 0x400 \n" - "ori $1, 0x400 \n" - "xori $1, 0x400 \n" - "or \\flags, $1 \n" - "mtc0 \\flags, $2, 1 \n" -#elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU) +#if defined(CONFIG_IRQ_CPU) /* * Slow, but doesn't suffer from a relatively unlikely race * condition we're having since days 1. */ " beqz \\flags, 1f \n" - " di \n" + " di \n" " ei \n" "1: \n" -#elif defined(CONFIG_CPU_MIPSR2) +#else /* * Fast, dangerous. Life is fun, life is good. */ " mfc0 $1, $12 \n" " ins $1, \\flags, 0, 1 \n" " mtc0 $1, $12 \n" -#else - " mfc0 $1, $12 \n" - " andi \\flags, 1 \n" - " ori $1, 0x1f \n" - " xori $1, 0x1f \n" - " or \\flags, $1 \n" - " mtc0 \\flags, $12 \n" #endif " irq_disable_hazard \n" " .set pop \n" " .endm \n"); - static inline void arch_local_irq_restore(unsigned long flags) { unsigned long __tmp1; -#ifdef CONFIG_MIPS_MT_SMTC - /* - * SMTC kernel needs to do a software replay of queued - * IPIs, at the cost of branch and call overhead on each - * local_irq_restore() - */ - if (unlikely(!(flags & 0x0400))) - smtc_ipi_replay(); -#endif - __asm__ __volatile__( "arch_local_irq_restore\t%0" : "=r" (__tmp1) @@ -232,6 +106,75 @@ static inline void __arch_local_irq_restore(unsigned long flags) : "0" (flags) : "memory"); } +#else +/* Functions that require preempt_{dis,en}able() are in mips-atomic.c */ +void arch_local_irq_disable(void); +unsigned long arch_local_irq_save(void); +void arch_local_irq_restore(unsigned long flags); +void __arch_local_irq_restore(unsigned long flags); +#endif /* if defined(CONFIG_CPU_MIPSR2) && !defined(CONFIG_MIPS_MT_SMTC) */ + + +__asm__( + " .macro arch_local_irq_enable \n" + " .set push \n" + " .set reorder \n" + " .set noat \n" +#ifdef CONFIG_MIPS_MT_SMTC + " mfc0 $1, $2, 1 # SMTC - clear TCStatus.IXMT \n" + " ori $1, 0x400 \n" + " xori $1, 0x400 \n" + " mtc0 $1, $2, 1 \n" +#elif defined(CONFIG_CPU_MIPSR2) + " ei \n" +#else + " mfc0 $1,$12 \n" + " ori $1,0x1f \n" + " xori $1,0x1e \n" + " mtc0 $1,$12 \n" +#endif + " irq_enable_hazard \n" + " .set pop \n" + " .endm"); + +extern void smtc_ipi_replay(void); + +static inline void arch_local_irq_enable(void) +{ +#ifdef CONFIG_MIPS_MT_SMTC + /* + * SMTC kernel needs to do a software replay of queued + * IPIs, at the cost of call overhead on each local_irq_enable() + */ + smtc_ipi_replay(); +#endif + __asm__ __volatile__( + "arch_local_irq_enable" + : /* no outputs */ + : /* no inputs */ + : "memory"); +} + + +__asm__( + " .macro arch_local_save_flags flags \n" + " .set push \n" + " .set reorder \n" +#ifdef CONFIG_MIPS_MT_SMTC + " mfc0 \\flags, $2, 1 \n" +#else + " mfc0 \\flags, $12 \n" +#endif + " .set pop \n" + " .endm \n"); + +static inline unsigned long arch_local_save_flags(void) +{ + unsigned long flags; + asm volatile("arch_local_save_flags %0" : "=r" (flags)); + return flags; +} + static inline int arch_irqs_disabled_flags(unsigned long flags) { @@ -245,7 +188,7 @@ static inline int arch_irqs_disabled_flags(unsigned long flags) #endif } -#endif +#endif /* #ifndef __ASSEMBLY__ */ /* * Do the CPU's IRQ-state tracing from assembly code. diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h index 8debe9e9175..18806a52061 100644 --- a/arch/mips/include/asm/thread_info.h +++ b/arch/mips/include/asm/thread_info.h @@ -112,12 +112,6 @@ register struct thread_info *__current_thread_info __asm__("$28"); #define TIF_LOAD_WATCH 25 /* If set, load watch registers */ #define TIF_SYSCALL_TRACE 31 /* syscall trace active */ -#ifdef CONFIG_MIPS32_O32 -#define TIF_32BIT TIF_32BIT_REGS -#elif defined(CONFIG_MIPS32_N32) -#define TIF_32BIT _TIF_32BIT_ADDR -#endif /* CONFIG_MIPS32_O32 */ - #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) #define _TIF_SIGPENDING (1<<TIF_SIGPENDING) #define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile index c4a82e841c7..eeddc58802e 100644 --- a/arch/mips/lib/Makefile +++ b/arch/mips/lib/Makefile @@ -2,8 +2,9 @@ # Makefile for MIPS-specific library files.. # -lib-y += csum_partial.o delay.o memcpy.o memset.o \ - strlen_user.o strncpy_user.o strnlen_user.o uncached.o +lib-y += bitops.o csum_partial.o delay.o memcpy.o memset.o \ + mips-atomic.o strlen_user.o strncpy_user.o \ + strnlen_user.o uncached.o obj-y += iomap.o obj-$(CONFIG_PCI) += iomap-pci.o diff --git a/arch/mips/lib/bitops.c b/arch/mips/lib/bitops.c new file mode 100644 index 00000000000..239a9c957b0 --- /dev/null +++ b/arch/mips/lib/bitops.c @@ -0,0 +1,179 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 1994-1997, 99, 2000, 06, 07 Ralf Baechle (ralf@linux-mips.org) + * Copyright (c) 1999, 2000 Silicon Graphics, Inc. + */ +#include <linux/bitops.h> +#include <linux/irqflags.h> +#include <linux/export.h> + + +/** + * __mips_set_bit - Atomically set a bit in memory. This is called by + * set_bit() if it cannot find a faster solution. + * @nr: the bit to set + * @addr: the address to start counting from + */ +void __mips_set_bit(unsigned long nr, volatile unsigned long *addr) +{ + volatile unsigned long *a = addr; + unsigned bit = nr & SZLONG_MASK; + unsigned long mask; + unsigned long flags; + + a += nr >> SZLONG_LOG; + mask = 1UL << bit; + raw_local_irq_save(flags); + *a |= mask; + raw_local_irq_restore(flags); +} +EXPORT_SYMBOL(__mips_set_bit); + + +/** + * __mips_clear_bit - Clears a bit in memory. This is called by clear_bit() if + * it cannot find a faster solution. + * @nr: Bit to clear + * @addr: Address to start counting from + */ +void __mips_clear_bit(unsigned long nr, volatile unsigned long *addr) +{ + volatile unsigned long *a = addr; + unsigned bit = nr & SZLONG_MASK; + unsigned long mask; + unsigned long flags; + + a += nr >> SZLONG_LOG; + mask = 1UL << bit; + raw_local_irq_save(flags); + *a &= ~mask; + raw_local_irq_restore(flags); +} +EXPORT_SYMBOL(__mips_clear_bit); + + +/** + * __mips_change_bit - Toggle a bit in memory. This is called by change_bit() + * if it cannot find a faster solution. + * @nr: Bit to change + * @addr: Address to start counting from + */ +void __mips_change_bit(unsigned long nr, volatile unsigned long *addr) +{ + volatile unsigned long *a = addr; + unsigned bit = nr & SZLONG_MASK; + unsigned long mask; + unsigned long flags; + + a += nr >> SZLONG_LOG; + mask = 1UL << bit; + raw_local_irq_save(flags); + *a ^= mask; + raw_local_irq_restore(flags); +} +EXPORT_SYMBOL(__mips_change_bit); + + +/** + * __mips_test_and_set_bit - Set a bit and return its old value. This is + * called by test_and_set_bit() if it cannot find a faster solution. + * @nr: Bit to set + * @addr: Address to count from + */ +int __mips_test_and_set_bit(unsigned long nr, + volatile unsigned long *addr) +{ + volatile unsigned long *a = addr; + unsigned bit = nr & SZLONG_MASK; + unsigned long mask; + unsigned long flags; + unsigned long res; + + a += nr >> SZLONG_LOG; + mask = 1UL << bit; + raw_local_irq_save(flags); + res = (mask & *a); + *a |= mask; + raw_local_irq_restore(flags); + return res; +} +EXPORT_SYMBOL(__mips_test_and_set_bit); + + +/** + * __mips_test_and_set_bit_lock - Set a bit and return its old value. This is + * called by test_and_set_bit_lock() if it cannot find a faster solution. + * @nr: Bit to set + * @addr: Address to count from + */ +int __mips_test_and_set_bit_lock(unsigned long nr, + volatile unsigned long *addr) +{ + volatile unsigned long *a = addr; + unsigned bit = nr & SZLONG_MASK; + unsigned long mask; + unsigned long flags; + unsigned long res; + + a += nr >> SZLONG_LOG; + mask = 1UL << bit; + raw_local_irq_save(flags); + res = (mask & *a); + *a |= mask; + raw_local_irq_restore(flags); + return res; +} +EXPORT_SYMBOL(__mips_test_and_set_bit_lock); + + +/** + * __mips_test_and_clear_bit - Clear a bit and return its old value. This is + * called by test_and_clear_bit() if it cannot find a faster solution. + * @nr: Bit to clear + * @addr: Address to count from + */ +int __mips_test_and_clear_bit(unsigned long nr, volatile unsigned long *addr) +{ + volatile unsigned long *a = addr; + unsigned bit = nr & SZLONG_MASK; + unsigned long mask; + unsigned long flags; + unsigned long res; + + a += nr >> SZLONG_LOG; + mask = 1UL << bit; + raw_local_irq_save(flags); + res = (mask & *a); + *a &= ~mask; + raw_local_irq_restore(flags); + return res; +} +EXPORT_SYMBOL(__mips_test_and_clear_bit); + + +/** + * __mips_test_and_change_bit - Change a bit and return its old value. This is + * called by test_and_change_bit() if it cannot find a faster solution. + * @nr: Bit to change + * @addr: Address to count from + */ +int __mips_test_and_change_bit(unsigned long nr, volatile unsigned long *addr) +{ + volatile unsigned long *a = addr; + unsigned bit = nr & SZLONG_MASK; + unsigned long mask; + unsigned long flags; + unsigned long res; + + a += nr >> SZLONG_LOG; + mask = 1UL << bit; + raw_local_irq_save(flags); + res = (mask & *a); + *a ^= mask; + raw_local_irq_restore(flags); + return res; +} +EXPORT_SYMBOL(__mips_test_and_change_bit); diff --git a/arch/mips/lib/mips-atomic.c b/arch/mips/lib/mips-atomic.c new file mode 100644 index 00000000000..e091430dbeb --- /dev/null +++ b/arch/mips/lib/mips-atomic.c @@ -0,0 +1,176 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003 by Ralf Baechle + * Copyright (C) 1996 by Paul M. Antoine + * Copyright (C) 1999 Silicon Graphics + * Copyright (C) 2000 MIPS Technologies, Inc. + */ +#include <asm/irqflags.h> +#include <asm/hazards.h> +#include <linux/compiler.h> +#include <linux/preempt.h> +#include <linux/export.h> + +#if !defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_MIPS_MT_SMTC) + +/* + * For cli() we have to insert nops to make sure that the new value + * has actually arrived in the status register before the end of this + * macro. + * R4000/R4400 need three nops, the R4600 two nops and the R10000 needs + * no nops at all. + */ +/* + * For TX49, operating only IE bit is not enough. + * + * If mfc0 $12 follows store and the mfc0 is last instruction of a + * page and fetching the next instruction causes TLB miss, the result + * of the mfc0 might wrongly contain EXL bit. + * + * ERT-TX49H2-027, ERT-TX49H3-012, ERT-TX49HL3-006, ERT-TX49H4-008 + * + * Workaround: mask EXL bit of the result or place a nop before mfc0. + */ +__asm__( + " .macro arch_local_irq_disable\n" + " .set push \n" + " .set noat \n" +#ifdef CONFIG_MIPS_MT_SMTC + " mfc0 $1, $2, 1 \n" + " ori $1, 0x400 \n" + " .set noreorder \n" + " mtc0 $1, $2, 1 \n" +#elif defined(CONFIG_CPU_MIPSR2) + /* see irqflags.h for inline function */ +#else + " mfc0 $1,$12 \n" + " ori $1,0x1f \n" + " xori $1,0x1f \n" + " .set noreorder \n" + " mtc0 $1,$12 \n" +#endif + " irq_disable_hazard \n" + " .set pop \n" + " .endm \n"); + +void arch_local_irq_disable(void) +{ + preempt_disable(); + __asm__ __volatile__( + "arch_local_irq_disable" + : /* no outputs */ + : /* no inputs */ + : "memory"); + preempt_enable(); +} +EXPORT_SYMBOL(arch_local_irq_disable); + + +__asm__( + " .macro arch_local_irq_save result \n" + " .set push \n" + " .set reorder \n" + " .set noat \n" +#ifdef CONFIG_MIPS_MT_SMTC + " mfc0 \\result, $2, 1 \n" + " ori $1, \\result, 0x400 \n" + " .set noreorder \n" + " mtc0 $1, $2, 1 \n" + " andi \\result, \\result, 0x400 \n" +#elif defined(CONFIG_CPU_MIPSR2) + /* see irqflags.h for inline function */ +#else + " mfc0 \\result, $12 \n" + " ori $1, \\result, 0x1f \n" + " xori $1, 0x1f \n" + " .set noreorder \n" + " mtc0 $1, $12 \n" +#endif + " irq_disable_hazard \n" + " .set pop \n" + " .endm \n"); + +unsigned long arch_local_irq_save(void) +{ + unsigned long flags; + preempt_disable(); + asm volatile("arch_local_irq_save\t%0" + : "=r" (flags) + : /* no inputs */ + : "memory"); + preempt_enable(); + return flags; +} +EXPORT_SYMBOL(arch_local_irq_save); + + +__asm__( + " .macro arch_local_irq_restore flags \n" + " .set push \n" + " .set noreorder \n" + " .set noat \n" +#ifdef CONFIG_MIPS_MT_SMTC + "mfc0 $1, $2, 1 \n" + "andi \\flags, 0x400 \n" + "ori $1, 0x400 \n" + "xori $1, 0x400 \n" + "or \\flags, $1 \n" + "mtc0 \\flags, $2, 1 \n" +#elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU) + /* see irqflags.h for inline function */ +#elif defined(CONFIG_CPU_MIPSR2) + /* see irqflags.h for inline function */ +#else + " mfc0 $1, $12 \n" + " andi \\flags, 1 \n" + " ori $1, 0x1f \n" + " xori $1, 0x1f \n" + " or \\flags, $1 \n" + " mtc0 \\flags, $12 \n" +#endif + " irq_disable_hazard \n" + " .set pop \n" + " .endm \n"); + +void arch_local_irq_restore(unsigned long flags) +{ + unsigned long __tmp1; + +#ifdef CONFIG_MIPS_MT_SMTC + /* + * SMTC kernel needs to do a software replay of queued + * IPIs, at the cost of branch and call overhead on each + * local_irq_restore() + */ + if (unlikely(!(flags & 0x0400))) + smtc_ipi_replay(); +#endif + preempt_disable(); + __asm__ __volatile__( + "arch_local_irq_restore\t%0" + : "=r" (__tmp1) + : "0" (flags) + : "memory"); + preempt_enable(); +} +EXPORT_SYMBOL(arch_local_irq_restore); + + +void __arch_local_irq_restore(unsigned long flags) +{ + unsigned long __tmp1; + + preempt_disable(); + __asm__ __volatile__( + "arch_local_irq_restore\t%0" + : "=r" (__tmp1) + : "0" (flags) + : "memory"); + preempt_enable(); +} +EXPORT_SYMBOL(__arch_local_irq_restore); + +#endif /* !defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_MIPS_MT_SMTC) */ diff --git a/arch/mips/mti-malta/malta-platform.c b/arch/mips/mti-malta/malta-platform.c index 80562b81f0f..74732177851 100644 --- a/arch/mips/mti-malta/malta-platform.c +++ b/arch/mips/mti-malta/malta-platform.c @@ -29,6 +29,7 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/platform_device.h> +#include <asm/mips-boards/maltaint.h> #include <mtd/mtd-abi.h> #define SMC_PORT(base, int) \ @@ -48,7 +49,7 @@ static struct plat_serial8250_port uart8250_data[] = { SMC_PORT(0x2F8, 3), { .mapbase = 0x1f000900, /* The CBUS UART */ - .irq = MIPS_CPU_IRQ_BASE + 2, + .irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_MB2, .uartclk = 3686400, /* Twice the usual clk! */ .iotype = UPIO_MEM32, .flags = CBUS_UART_FLAGS, diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 5dba755a43e..d385f396dfe 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -96,6 +96,7 @@ config S390 select HAVE_MEMBLOCK_NODE_MAP select HAVE_CMPXCHG_LOCAL select HAVE_CMPXCHG_DOUBLE + select HAVE_ALIGNED_STRUCT_PAGE if SLUB select HAVE_VIRT_CPU_ACCOUNTING select VIRT_CPU_ACCOUNTING select ARCH_DISCARD_MEMBLOCK diff --git a/arch/s390/include/asm/compat.h b/arch/s390/include/asm/compat.h index a34a9d612fc..18cd6b59265 100644 --- a/arch/s390/include/asm/compat.h +++ b/arch/s390/include/asm/compat.h @@ -20,7 +20,7 @@ #define PSW32_MASK_CC 0x00003000UL #define PSW32_MASK_PM 0x00000f00UL -#define PSW32_MASK_USER 0x00003F00UL +#define PSW32_MASK_USER 0x0000FF00UL #define PSW32_ADDR_AMODE 0x80000000UL #define PSW32_ADDR_INSN 0x7FFFFFFFUL diff --git a/arch/s390/include/asm/topology.h b/arch/s390/include/asm/topology.h index 9ca30538376..9935cbd6a46 100644 --- a/arch/s390/include/asm/topology.h +++ b/arch/s390/include/asm/topology.h @@ -8,6 +8,9 @@ struct cpu; #ifdef CONFIG_SCHED_BOOK +extern unsigned char cpu_socket_id[NR_CPUS]; +#define topology_physical_package_id(cpu) (cpu_socket_id[cpu]) + extern unsigned char cpu_core_id[NR_CPUS]; extern cpumask_t cpu_core_map[NR_CPUS]; diff --git a/arch/s390/include/uapi/asm/ptrace.h b/arch/s390/include/uapi/asm/ptrace.h index 705588a16d7..a5ca214b34f 100644 --- a/arch/s390/include/uapi/asm/ptrace.h +++ b/arch/s390/include/uapi/asm/ptrace.h @@ -239,7 +239,7 @@ typedef struct #define PSW_MASK_EA 0x00000000UL #define PSW_MASK_BA 0x00000000UL -#define PSW_MASK_USER 0x00003F00UL +#define PSW_MASK_USER 0x0000FF00UL #define PSW_ADDR_AMODE 0x80000000UL #define PSW_ADDR_INSN 0x7FFFFFFFUL @@ -269,7 +269,7 @@ typedef struct #define PSW_MASK_EA 0x0000000100000000UL #define PSW_MASK_BA 0x0000000080000000UL -#define PSW_MASK_USER 0x00003F8180000000UL +#define PSW_MASK_USER 0x0000FF8180000000UL #define PSW_ADDR_AMODE 0x0000000000000000UL #define PSW_ADDR_INSN 0xFFFFFFFFFFFFFFFFUL diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c index a1e8a8694bb..593fcc9253f 100644 --- a/arch/s390/kernel/compat_signal.c +++ b/arch/s390/kernel/compat_signal.c @@ -309,6 +309,10 @@ static int restore_sigregs32(struct pt_regs *regs,_sigregs32 __user *sregs) regs->psw.mask = (regs->psw.mask & ~PSW_MASK_USER) | (__u64)(regs32.psw.mask & PSW32_MASK_USER) << 32 | (__u64)(regs32.psw.addr & PSW32_ADDR_AMODE); + /* Check for invalid user address space control. */ + if ((regs->psw.mask & PSW_MASK_ASC) >= (psw_kernel_bits & PSW_MASK_ASC)) + regs->psw.mask = (psw_user_bits & PSW_MASK_ASC) | + (regs->psw.mask & ~PSW_MASK_ASC); regs->psw.addr = (__u64)(regs32.psw.addr & PSW32_ADDR_INSN); for (i = 0; i < NUM_GPRS; i++) regs->gprs[i] = (__u64) regs32.gprs[i]; @@ -481,7 +485,10 @@ static int setup_frame32(int sig, struct k_sigaction *ka, /* Set up registers for signal handler */ regs->gprs[15] = (__force __u64) frame; - regs->psw.mask |= PSW_MASK_BA; /* force amode 31 */ + /* Force 31 bit amode and default user address space control. */ + regs->psw.mask = PSW_MASK_BA | + (psw_user_bits & PSW_MASK_ASC) | + (regs->psw.mask & ~PSW_MASK_ASC); regs->psw.addr = (__force __u64) ka->sa.sa_handler; regs->gprs[2] = map_signal(sig); @@ -549,7 +556,10 @@ static int setup_rt_frame32(int sig, struct k_sigaction *ka, siginfo_t *info, /* Set up registers for signal handler */ regs->gprs[15] = (__force __u64) frame; - regs->psw.mask |= PSW_MASK_BA; /* force amode 31 */ + /* Force 31 bit amode and default user address space control. */ + regs->psw.mask = PSW_MASK_BA | + (psw_user_bits & PSW_MASK_ASC) | + (regs->psw.mask & ~PSW_MASK_ASC); regs->psw.addr = (__u64) ka->sa.sa_handler; regs->gprs[2] = map_signal(sig); diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c index c13a2a37ef0..d1259d87507 100644 --- a/arch/s390/kernel/signal.c +++ b/arch/s390/kernel/signal.c @@ -136,6 +136,10 @@ static int restore_sigregs(struct pt_regs *regs, _sigregs __user *sregs) /* Use regs->psw.mask instead of psw_user_bits to preserve PER bit. */ regs->psw.mask = (regs->psw.mask & ~PSW_MASK_USER) | (user_sregs.regs.psw.mask & PSW_MASK_USER); + /* Check for invalid user address space control. */ + if ((regs->psw.mask & PSW_MASK_ASC) >= (psw_kernel_bits & PSW_MASK_ASC)) + regs->psw.mask = (psw_user_bits & PSW_MASK_ASC) | + (regs->psw.mask & ~PSW_MASK_ASC); /* Check for invalid amode */ if (regs->psw.mask & PSW_MASK_EA) regs->psw.mask |= PSW_MASK_BA; @@ -273,7 +277,10 @@ static int setup_frame(int sig, struct k_sigaction *ka, /* Set up registers for signal handler */ regs->gprs[15] = (unsigned long) frame; - regs->psw.mask |= PSW_MASK_EA | PSW_MASK_BA; /* 64 bit amode */ + /* Force default amode and default user address space control. */ + regs->psw.mask = PSW_MASK_EA | PSW_MASK_BA | + (psw_user_bits & PSW_MASK_ASC) | + (regs->psw.mask & ~PSW_MASK_ASC); regs->psw.addr = (unsigned long) ka->sa.sa_handler | PSW_ADDR_AMODE; regs->gprs[2] = map_signal(sig); @@ -346,7 +353,10 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, /* Set up registers for signal handler */ regs->gprs[15] = (unsigned long) frame; - regs->psw.mask |= PSW_MASK_EA | PSW_MASK_BA; /* 64 bit amode */ + /* Force default amode and default user address space control. */ + regs->psw.mask = PSW_MASK_EA | PSW_MASK_BA | + (psw_user_bits & PSW_MASK_ASC) | + (regs->psw.mask & ~PSW_MASK_ASC); regs->psw.addr = (unsigned long) ka->sa.sa_handler | PSW_ADDR_AMODE; regs->gprs[2] = map_signal(sig); diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c index 54d93f4b681..dd55f7c2010 100644 --- a/arch/s390/kernel/topology.c +++ b/arch/s390/kernel/topology.c @@ -40,6 +40,7 @@ static DEFINE_SPINLOCK(topology_lock); static struct mask_info core_info; cpumask_t cpu_core_map[NR_CPUS]; unsigned char cpu_core_id[NR_CPUS]; +unsigned char cpu_socket_id[NR_CPUS]; static struct mask_info book_info; cpumask_t cpu_book_map[NR_CPUS]; @@ -83,11 +84,12 @@ static struct mask_info *add_cpus_to_mask(struct topology_cpu *tl_cpu, cpumask_set_cpu(lcpu, &book->mask); cpu_book_id[lcpu] = book->id; cpumask_set_cpu(lcpu, &core->mask); + cpu_core_id[lcpu] = rcpu; if (one_core_per_cpu) { - cpu_core_id[lcpu] = rcpu; + cpu_socket_id[lcpu] = rcpu; core = core->next; } else { - cpu_core_id[lcpu] = core->id; + cpu_socket_id[lcpu] = core->id; } smp_cpu_set_polarization(lcpu, tl_cpu->pp); } diff --git a/arch/s390/mm/gup.c b/arch/s390/mm/gup.c index 8b8285310b5..1f5315d1215 100644 --- a/arch/s390/mm/gup.c +++ b/arch/s390/mm/gup.c @@ -180,8 +180,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write, addr = start; len = (unsigned long) nr_pages << PAGE_SHIFT; end = start + len; - if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ, - (void __user *)start, len))) + if ((end < start) || (end > TASK_SIZE)) return 0; local_irq_save(flags); @@ -229,7 +228,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write, addr = start; len = (unsigned long) nr_pages << PAGE_SHIFT; end = start + len; - if (end < start) + if ((end < start) || (end > TASK_SIZE)) goto slow_irqon; /* diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig index e5c5473e69c..c4fbb21e802 100644 --- a/arch/unicore32/Kconfig +++ b/arch/unicore32/Kconfig @@ -16,6 +16,8 @@ config UNICORE32 select ARCH_WANT_FRAME_POINTERS select GENERIC_IOMAP select MODULES_USE_ELF_REL + select GENERIC_KERNEL_THREAD + select GENERIC_KERNEL_EXECVE help UniCore-32 is 32-bit Instruction Set Architecture, including a series of low-power-consumption RISC chip @@ -64,6 +66,9 @@ config GENERIC_CALIBRATE_DELAY config ARCH_MAY_HAVE_PC_FDC bool +config ZONE_DMA + def_bool y + config NEED_DMA_MAP_STATE def_bool y @@ -216,7 +221,7 @@ config PUV3_GPIO bool depends on !ARCH_FPGA select GENERIC_GPIO - select GPIO_SYSFS if EXPERIMENTAL + select GPIO_SYSFS default y if PUV3_NB0916 diff --git a/arch/unicore32/include/asm/Kbuild b/arch/unicore32/include/asm/Kbuild index c910c9857e1..601e92f18af 100644 --- a/arch/unicore32/include/asm/Kbuild +++ b/arch/unicore32/include/asm/Kbuild @@ -1,4 +1,3 @@ -include include/asm-generic/Kbuild.asm generic-y += atomic.h generic-y += auxvec.h diff --git a/arch/unicore32/include/asm/bug.h b/arch/unicore32/include/asm/bug.h index b1ff8cadb08..93a56f3e234 100644 --- a/arch/unicore32/include/asm/bug.h +++ b/arch/unicore32/include/asm/bug.h @@ -19,9 +19,4 @@ extern void die(const char *msg, struct pt_regs *regs, int err); extern void uc32_notify_die(const char *str, struct pt_regs *regs, struct siginfo *info, unsigned long err, unsigned long trap); -extern asmlinkage void __backtrace(void); -extern asmlinkage void c_backtrace(unsigned long fp, int pmode); - -extern void __show_regs(struct pt_regs *); - #endif /* __UNICORE_BUG_H__ */ diff --git a/arch/unicore32/include/asm/cmpxchg.h b/arch/unicore32/include/asm/cmpxchg.h index df4d5acfd19..8e797ad4fa2 100644 --- a/arch/unicore32/include/asm/cmpxchg.h +++ b/arch/unicore32/include/asm/cmpxchg.h @@ -35,7 +35,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, : "memory", "cc"); break; default: - ret = __xchg_bad_pointer(); + __xchg_bad_pointer(); } return ret; diff --git a/arch/unicore32/include/asm/kvm_para.h b/arch/unicore32/include/asm/kvm_para.h deleted file mode 100644 index 14fab8f0b95..00000000000 --- a/arch/unicore32/include/asm/kvm_para.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/kvm_para.h> diff --git a/arch/unicore32/include/asm/processor.h b/arch/unicore32/include/asm/processor.h index 14382cb0965..4eaa4216766 100644 --- a/arch/unicore32/include/asm/processor.h +++ b/arch/unicore32/include/asm/processor.h @@ -72,11 +72,6 @@ unsigned long get_wchan(struct task_struct *p); #define cpu_relax() barrier() -/* - * Create a new kernel thread - */ -extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); - #define task_pt_regs(p) \ ((struct pt_regs *)(THREAD_START_SP + task_stack_page(p)) - 1) diff --git a/arch/unicore32/include/asm/ptrace.h b/arch/unicore32/include/asm/ptrace.h index b9caf9b0997..726749dab52 100644 --- a/arch/unicore32/include/asm/ptrace.h +++ b/arch/unicore32/include/asm/ptrace.h @@ -12,80 +12,10 @@ #ifndef __UNICORE_PTRACE_H__ #define __UNICORE_PTRACE_H__ -#define PTRACE_GET_THREAD_AREA 22 - -/* - * PSR bits - */ -#define USER_MODE 0x00000010 -#define REAL_MODE 0x00000011 -#define INTR_MODE 0x00000012 -#define PRIV_MODE 0x00000013 -#define ABRT_MODE 0x00000017 -#define EXTN_MODE 0x0000001b -#define SUSR_MODE 0x0000001f -#define MODE_MASK 0x0000001f -#define PSR_R_BIT 0x00000040 -#define PSR_I_BIT 0x00000080 -#define PSR_V_BIT 0x10000000 -#define PSR_C_BIT 0x20000000 -#define PSR_Z_BIT 0x40000000 -#define PSR_S_BIT 0x80000000 - -/* - * Groups of PSR bits - */ -#define PSR_f 0xff000000 /* Flags */ -#define PSR_c 0x000000ff /* Control */ +#include <uapi/asm/ptrace.h> #ifndef __ASSEMBLY__ -/* - * This struct defines the way the registers are stored on the - * stack during a system call. Note that sizeof(struct pt_regs) - * has to be a multiple of 8. - */ -struct pt_regs { - unsigned long uregs[34]; -}; - -#define UCreg_asr uregs[32] -#define UCreg_pc uregs[31] -#define UCreg_lr uregs[30] -#define UCreg_sp uregs[29] -#define UCreg_ip uregs[28] -#define UCreg_fp uregs[27] -#define UCreg_26 uregs[26] -#define UCreg_25 uregs[25] -#define UCreg_24 uregs[24] -#define UCreg_23 uregs[23] -#define UCreg_22 uregs[22] -#define UCreg_21 uregs[21] -#define UCreg_20 uregs[20] -#define UCreg_19 uregs[19] -#define UCreg_18 uregs[18] -#define UCreg_17 uregs[17] -#define UCreg_16 uregs[16] -#define UCreg_15 uregs[15] -#define UCreg_14 uregs[14] -#define UCreg_13 uregs[13] -#define UCreg_12 uregs[12] -#define UCreg_11 uregs[11] -#define UCreg_10 uregs[10] -#define UCreg_09 uregs[9] -#define UCreg_08 uregs[8] -#define UCreg_07 uregs[7] -#define UCreg_06 uregs[6] -#define UCreg_05 uregs[5] -#define UCreg_04 uregs[4] -#define UCreg_03 uregs[3] -#define UCreg_02 uregs[2] -#define UCreg_01 uregs[1] -#define UCreg_00 uregs[0] -#define UCreg_ORIG_00 uregs[33] - -#ifdef __KERNEL__ - #define user_mode(regs) \ (processor_mode(regs) == USER_MODE) @@ -125,9 +55,5 @@ static inline int valid_user_regs(struct pt_regs *regs) #define instruction_pointer(regs) ((regs)->UCreg_pc) -#endif /* __KERNEL__ */ - #endif /* __ASSEMBLY__ */ - #endif - diff --git a/arch/unicore32/include/uapi/asm/Kbuild b/arch/unicore32/include/uapi/asm/Kbuild index baebb3da1d4..0514d7ad685 100644 --- a/arch/unicore32/include/uapi/asm/Kbuild +++ b/arch/unicore32/include/uapi/asm/Kbuild @@ -1,3 +1,10 @@ # UAPI Header export list include include/uapi/asm-generic/Kbuild.asm +header-y += byteorder.h +header-y += kvm_para.h +header-y += ptrace.h +header-y += sigcontext.h +header-y += unistd.h + +generic-y += kvm_para.h diff --git a/arch/unicore32/include/asm/byteorder.h b/arch/unicore32/include/uapi/asm/byteorder.h index ebe1b3fef3e..ebe1b3fef3e 100644 --- a/arch/unicore32/include/asm/byteorder.h +++ b/arch/unicore32/include/uapi/asm/byteorder.h diff --git a/arch/unicore32/include/uapi/asm/ptrace.h b/arch/unicore32/include/uapi/asm/ptrace.h new file mode 100644 index 00000000000..187aa2e98a5 --- /dev/null +++ b/arch/unicore32/include/uapi/asm/ptrace.h @@ -0,0 +1,90 @@ +/* + * linux/arch/unicore32/include/asm/ptrace.h + * + * Code specific to PKUnity SoC and UniCore ISA + * + * Copyright (C) 2001-2010 GUAN Xue-tao + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _UAPI__UNICORE_PTRACE_H__ +#define _UAPI__UNICORE_PTRACE_H__ + +#define PTRACE_GET_THREAD_AREA 22 + +/* + * PSR bits + */ +#define USER_MODE 0x00000010 +#define REAL_MODE 0x00000011 +#define INTR_MODE 0x00000012 +#define PRIV_MODE 0x00000013 +#define ABRT_MODE 0x00000017 +#define EXTN_MODE 0x0000001b +#define SUSR_MODE 0x0000001f +#define MODE_MASK 0x0000001f +#define PSR_R_BIT 0x00000040 +#define PSR_I_BIT 0x00000080 +#define PSR_V_BIT 0x10000000 +#define PSR_C_BIT 0x20000000 +#define PSR_Z_BIT 0x40000000 +#define PSR_S_BIT 0x80000000 + +/* + * Groups of PSR bits + */ +#define PSR_f 0xff000000 /* Flags */ +#define PSR_c 0x000000ff /* Control */ + +#ifndef __ASSEMBLY__ + +/* + * This struct defines the way the registers are stored on the + * stack during a system call. Note that sizeof(struct pt_regs) + * has to be a multiple of 8. + */ +struct pt_regs { + unsigned long uregs[34]; +}; + +#define UCreg_asr uregs[32] +#define UCreg_pc uregs[31] +#define UCreg_lr uregs[30] +#define UCreg_sp uregs[29] +#define UCreg_ip uregs[28] +#define UCreg_fp uregs[27] +#define UCreg_26 uregs[26] +#define UCreg_25 uregs[25] +#define UCreg_24 uregs[24] +#define UCreg_23 uregs[23] +#define UCreg_22 uregs[22] +#define UCreg_21 uregs[21] +#define UCreg_20 uregs[20] +#define UCreg_19 uregs[19] +#define UCreg_18 uregs[18] +#define UCreg_17 uregs[17] +#define UCreg_16 uregs[16] +#define UCreg_15 uregs[15] +#define UCreg_14 uregs[14] +#define UCreg_13 uregs[13] +#define UCreg_12 uregs[12] +#define UCreg_11 uregs[11] +#define UCreg_10 uregs[10] +#define UCreg_09 uregs[9] +#define UCreg_08 uregs[8] +#define UCreg_07 uregs[7] +#define UCreg_06 uregs[6] +#define UCreg_05 uregs[5] +#define UCreg_04 uregs[4] +#define UCreg_03 uregs[3] +#define UCreg_02 uregs[2] +#define UCreg_01 uregs[1] +#define UCreg_00 uregs[0] +#define UCreg_ORIG_00 uregs[33] + + +#endif /* __ASSEMBLY__ */ + +#endif /* _UAPI__UNICORE_PTRACE_H__ */ diff --git a/arch/unicore32/include/asm/sigcontext.h b/arch/unicore32/include/uapi/asm/sigcontext.h index 6a2d7671c05..6a2d7671c05 100644 --- a/arch/unicore32/include/asm/sigcontext.h +++ b/arch/unicore32/include/uapi/asm/sigcontext.h diff --git a/arch/unicore32/include/asm/unistd.h b/arch/unicore32/include/uapi/asm/unistd.h index 2abcf61c615..d18a3be89b3 100644 --- a/arch/unicore32/include/asm/unistd.h +++ b/arch/unicore32/include/uapi/asm/unistd.h @@ -12,3 +12,4 @@ /* Use the standard ABI for syscalls. */ #include <asm-generic/unistd.h> +#define __ARCH_WANT_SYS_EXECVE diff --git a/arch/unicore32/kernel/entry.S b/arch/unicore32/kernel/entry.S index dcb87ab19dd..7049350c790 100644 --- a/arch/unicore32/kernel/entry.S +++ b/arch/unicore32/kernel/entry.S @@ -573,17 +573,16 @@ ENDPROC(ret_to_user) */ ENTRY(ret_from_fork) b.l schedule_tail - get_thread_info tsk - ldw r1, [tsk+], #TI_FLAGS @ check for syscall tracing - mov why, #1 - cand.a r1, #_TIF_SYSCALL_TRACE @ are we tracing syscalls? - beq ret_slow_syscall - mov r1, sp - mov r0, #1 @ trace exit [IP = 1] - b.l syscall_trace b ret_slow_syscall ENDPROC(ret_from_fork) +ENTRY(ret_from_kernel_thread) + b.l schedule_tail + mov r0, r5 + adr lr, ret_slow_syscall + mov pc, r4 +ENDPROC(ret_from_kernel_thread) + /*============================================================================= * SWI handler *----------------------------------------------------------------------------- @@ -669,11 +668,6 @@ __cr_alignment: #endif .ltorg -ENTRY(sys_execve) - add r3, sp, #S_OFF - b __sys_execve -ENDPROC(sys_execve) - ENTRY(sys_clone) add ip, sp, #S_OFF stw ip, [sp+], #4 diff --git a/arch/unicore32/kernel/process.c b/arch/unicore32/kernel/process.c index b008586dad7..a8fe265ce2c 100644 --- a/arch/unicore32/kernel/process.c +++ b/arch/unicore32/kernel/process.c @@ -258,6 +258,7 @@ void release_thread(struct task_struct *dead_task) } asmlinkage void ret_from_fork(void) __asm__("ret_from_fork"); +asmlinkage void ret_from_kernel_thread(void) __asm__("ret_from_kernel_thread"); int copy_thread(unsigned long clone_flags, unsigned long stack_start, @@ -266,17 +267,22 @@ copy_thread(unsigned long clone_flags, unsigned long stack_start, struct thread_info *thread = task_thread_info(p); struct pt_regs *childregs = task_pt_regs(p); - *childregs = *regs; - childregs->UCreg_00 = 0; - childregs->UCreg_sp = stack_start; - memset(&thread->cpu_context, 0, sizeof(struct cpu_context_save)); thread->cpu_context.sp = (unsigned long)childregs; - thread->cpu_context.pc = (unsigned long)ret_from_fork; - - if (clone_flags & CLONE_SETTLS) - childregs->UCreg_16 = regs->UCreg_03; + if (unlikely(!regs)) { + thread->cpu_context.pc = (unsigned long)ret_from_kernel_thread; + thread->cpu_context.r4 = stack_start; + thread->cpu_context.r5 = stk_sz; + memset(childregs, 0, sizeof(struct pt_regs)); + } else { + thread->cpu_context.pc = (unsigned long)ret_from_fork; + *childregs = *regs; + childregs->UCreg_00 = 0; + childregs->UCreg_sp = stack_start; + if (clone_flags & CLONE_SETTLS) + childregs->UCreg_16 = regs->UCreg_03; + } return 0; } @@ -305,42 +311,6 @@ int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fp) } EXPORT_SYMBOL(dump_fpu); -/* - * Shuffle the argument into the correct register before calling the - * thread function. r1 is the thread argument, r2 is the pointer to - * the thread function, and r3 points to the exit function. - */ -asm(".pushsection .text\n" -" .align\n" -" .type kernel_thread_helper, #function\n" -"kernel_thread_helper:\n" -" mov.a asr, r7\n" -" mov r0, r4\n" -" mov lr, r6\n" -" mov pc, r5\n" -" .size kernel_thread_helper, . - kernel_thread_helper\n" -" .popsection"); - -/* - * Create a kernel thread. - */ -pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags) -{ - struct pt_regs regs; - - memset(®s, 0, sizeof(regs)); - - regs.UCreg_04 = (unsigned long)arg; - regs.UCreg_05 = (unsigned long)fn; - regs.UCreg_06 = (unsigned long)do_exit; - regs.UCreg_07 = PRIV_MODE; - regs.UCreg_pc = (unsigned long)kernel_thread_helper; - regs.UCreg_asr = regs.UCreg_07 | PSR_I_BIT; - - return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, ®s, 0, NULL, NULL); -} -EXPORT_SYMBOL(kernel_thread); - unsigned long get_wchan(struct task_struct *p) { struct stackframe frame; diff --git a/arch/unicore32/kernel/setup.h b/arch/unicore32/kernel/setup.h index f23955028a1..30f749da8f7 100644 --- a/arch/unicore32/kernel/setup.h +++ b/arch/unicore32/kernel/setup.h @@ -30,4 +30,10 @@ extern char __vectors_start[], __vectors_end[]; extern void kernel_thread_helper(void); extern void __init early_signal_init(void); + +extern asmlinkage void __backtrace(void); +extern asmlinkage void c_backtrace(unsigned long fp, int pmode); + +extern void __show_regs(struct pt_regs *); + #endif diff --git a/arch/unicore32/kernel/sys.c b/arch/unicore32/kernel/sys.c index fabdee96110..9680134b31f 100644 --- a/arch/unicore32/kernel/sys.c +++ b/arch/unicore32/kernel/sys.c @@ -42,69 +42,6 @@ asmlinkage long __sys_clone(unsigned long clone_flags, unsigned long newsp, parent_tid, child_tid); } -/* sys_execve() executes a new program. - * This is called indirectly via a small wrapper - */ -asmlinkage long __sys_execve(const char __user *filename, - const char __user *const __user *argv, - const char __user *const __user *envp, - struct pt_regs *regs) -{ - int error; - struct filename *fn; - - fn = getname(filename); - error = PTR_ERR(fn); - if (IS_ERR(fn)) - goto out; - error = do_execve(fn->name, argv, envp, regs); - putname(fn); -out: - return error; -} - -int kernel_execve(const char *filename, - const char *const argv[], - const char *const envp[]) -{ - struct pt_regs regs; - int ret; - - memset(®s, 0, sizeof(struct pt_regs)); - ret = do_execve(filename, - (const char __user *const __user *)argv, - (const char __user *const __user *)envp, ®s); - if (ret < 0) - goto out; - - /* - * Save argc to the register structure for userspace. - */ - regs.UCreg_00 = ret; - - /* - * We were successful. We won't be returning to our caller, but - * instead to user space by manipulating the kernel stack. - */ - asm("add r0, %0, %1\n\t" - "mov r1, %2\n\t" - "mov r2, %3\n\t" - "mov r22, #0\n\t" /* not a syscall */ - "mov r23, %0\n\t" /* thread structure */ - "b.l memmove\n\t" /* copy regs to top of stack */ - "mov sp, r0\n\t" /* reposition stack pointer */ - "b ret_to_user" - : - : "r" (current_thread_info()), - "Ir" (THREAD_START_SP - sizeof(regs)), - "r" (®s), - "Ir" (sizeof(regs)) - : "r0", "r1", "r2", "r3", "ip", "lr", "memory"); - - out: - return ret; -} - /* Note: used by the compat code even in 64-bit Linux. */ SYSCALL_DEFINE6(mmap2, unsigned long, addr, unsigned long, len, unsigned long, prot, unsigned long, flags, diff --git a/arch/unicore32/mm/fault.c b/arch/unicore32/mm/fault.c index 2eeb9c04cab..f9b5c10bcce 100644 --- a/arch/unicore32/mm/fault.c +++ b/arch/unicore32/mm/fault.c @@ -168,7 +168,7 @@ static inline bool access_error(unsigned int fsr, struct vm_area_struct *vma) } static int __do_pf(struct mm_struct *mm, unsigned long addr, unsigned int fsr, - struct task_struct *tsk) + unsigned int flags, struct task_struct *tsk) { struct vm_area_struct *vma; int fault; @@ -194,14 +194,7 @@ good_area: * If for any reason at all we couldn't handle the fault, make * sure we exit gracefully rather than endlessly redo the fault. */ - fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, - (!(fsr ^ 0x12)) ? FAULT_FLAG_WRITE : 0); - if (unlikely(fault & VM_FAULT_ERROR)) - return fault; - if (fault & VM_FAULT_MAJOR) - tsk->maj_flt++; - else - tsk->min_flt++; + fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, flags); return fault; check_stack: @@ -216,6 +209,8 @@ static int do_pf(unsigned long addr, unsigned int fsr, struct pt_regs *regs) struct task_struct *tsk; struct mm_struct *mm; int fault, sig, code; + unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE | + ((!(fsr ^ 0x12)) ? FAULT_FLAG_WRITE : 0); tsk = current; mm = tsk->mm; @@ -236,6 +231,7 @@ static int do_pf(unsigned long addr, unsigned int fsr, struct pt_regs *regs) if (!user_mode(regs) && !search_exception_tables(regs->UCreg_pc)) goto no_context; +retry: down_read(&mm->mmap_sem); } else { /* @@ -251,7 +247,28 @@ static int do_pf(unsigned long addr, unsigned int fsr, struct pt_regs *regs) #endif } - fault = __do_pf(mm, addr, fsr, tsk); + fault = __do_pf(mm, addr, fsr, flags, tsk); + + /* If we need to retry but a fatal signal is pending, handle the + * signal first. We do not need to release the mmap_sem because + * it would already be released in __lock_page_or_retry in + * mm/filemap.c. */ + if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current)) + return 0; + + if (!(fault & VM_FAULT_ERROR) && (flags & FAULT_FLAG_ALLOW_RETRY)) { + if (fault & VM_FAULT_MAJOR) + tsk->maj_flt++; + else + tsk->min_flt++; + if (fault & VM_FAULT_RETRY) { + /* Clear FAULT_FLAG_ALLOW_RETRY to avoid any risk + * of starvation. */ + flags &= ~FAULT_FLAG_ALLOW_RETRY; + goto retry; + } + } + up_read(&mm->mmap_sem); /* diff --git a/arch/x86/kvm/cpuid.h b/arch/x86/kvm/cpuid.h index a10e4601685..58fc5148882 100644 --- a/arch/x86/kvm/cpuid.h +++ b/arch/x86/kvm/cpuid.h @@ -24,6 +24,9 @@ static inline bool guest_cpuid_has_xsave(struct kvm_vcpu *vcpu) { struct kvm_cpuid_entry2 *best; + if (!static_cpu_has(X86_FEATURE_XSAVE)) + return 0; + best = kvm_find_cpuid_entry(vcpu, 1, 0); return best && (best->ecx & bit(X86_FEATURE_XSAVE)); } diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index ad6b1dd06f8..f85815945fc 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -6549,19 +6549,22 @@ static void vmx_cpuid_update(struct kvm_vcpu *vcpu) } } - exec_control = vmcs_read32(SECONDARY_VM_EXEC_CONTROL); /* Exposing INVPCID only when PCID is exposed */ best = kvm_find_cpuid_entry(vcpu, 0x7, 0); if (vmx_invpcid_supported() && best && (best->ebx & bit(X86_FEATURE_INVPCID)) && guest_cpuid_has_pcid(vcpu)) { + exec_control = vmcs_read32(SECONDARY_VM_EXEC_CONTROL); exec_control |= SECONDARY_EXEC_ENABLE_INVPCID; vmcs_write32(SECONDARY_VM_EXEC_CONTROL, exec_control); } else { - exec_control &= ~SECONDARY_EXEC_ENABLE_INVPCID; - vmcs_write32(SECONDARY_VM_EXEC_CONTROL, - exec_control); + if (cpu_has_secondary_exec_ctrls()) { + exec_control = vmcs_read32(SECONDARY_VM_EXEC_CONTROL); + exec_control &= ~SECONDARY_EXEC_ENABLE_INVPCID; + vmcs_write32(SECONDARY_VM_EXEC_CONTROL, + exec_control); + } if (best) best->ebx &= ~bit(X86_FEATURE_INVPCID); } diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 224a7e78cb6..4f7641756be 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -5781,6 +5781,9 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu, int pending_vec, max_bits, idx; struct desc_ptr dt; + if (!guest_cpuid_has_xsave(vcpu) && (sregs->cr4 & X86_CR4_OSXSAVE)) + return -EINVAL; + dt.size = sregs->idt.limit; dt.address = sregs->idt.base; kvm_x86_ops->set_idt(vcpu, &dt); diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index fc2de5528dc..b00000e8aef 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -67,6 +67,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x13d3, 0x3304) }, { USB_DEVICE(0x0930, 0x0215) }, { USB_DEVICE(0x0489, 0xE03D) }, + { USB_DEVICE(0x0489, 0xE027) }, /* Atheros AR9285 Malbec with sflash firmware */ { USB_DEVICE(0x03F0, 0x311D) }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index debda27df9b..ee82f2fb65f 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -124,6 +124,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE }, { USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE }, { USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE }, + { USB_DEVICE(0x0489, 0xe027), .driver_info = BTUSB_IGNORE }, /* Atheros AR9285 Malbec with sflash firmware */ { USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE }, diff --git a/drivers/bus/omap-ocp2scp.c b/drivers/bus/omap-ocp2scp.c index ff63560b846..0c48b0e05ed 100644 --- a/drivers/bus/omap-ocp2scp.c +++ b/drivers/bus/omap-ocp2scp.c @@ -22,6 +22,26 @@ #include <linux/pm_runtime.h> #include <linux/of.h> #include <linux/of_platform.h> +#include <linux/platform_data/omap_ocp2scp.h> + +/** + * _count_resources - count for the number of resources + * @res: struct resource * + * + * Count and return the number of resources populated for the device that is + * connected to ocp2scp. + */ +static unsigned _count_resources(struct resource *res) +{ + int cnt = 0; + + while (res->start != res->end) { + cnt++; + res++; + } + + return cnt; +} static int ocp2scp_remove_devices(struct device *dev, void *c) { @@ -34,20 +54,62 @@ static int ocp2scp_remove_devices(struct device *dev, void *c) static int __devinit omap_ocp2scp_probe(struct platform_device *pdev) { - int ret; - struct device_node *np = pdev->dev.of_node; + int ret; + unsigned res_cnt, i; + struct device_node *np = pdev->dev.of_node; + struct platform_device *pdev_child; + struct omap_ocp2scp_platform_data *pdata = pdev->dev.platform_data; + struct omap_ocp2scp_dev *dev; if (np) { ret = of_platform_populate(np, NULL, NULL, &pdev->dev); if (ret) { - dev_err(&pdev->dev, "failed to add resources for ocp2scp child\n"); + dev_err(&pdev->dev, + "failed to add resources for ocp2scp child\n"); goto err0; } + } else if (pdata) { + for (i = 0, dev = *pdata->devices; i < pdata->dev_cnt; i++, + dev++) { + res_cnt = _count_resources(dev->res); + + pdev_child = platform_device_alloc(dev->drv_name, + PLATFORM_DEVID_AUTO); + if (!pdev_child) { + dev_err(&pdev->dev, + "failed to allocate mem for ocp2scp child\n"); + goto err0; + } + + ret = platform_device_add_resources(pdev_child, + dev->res, res_cnt); + if (ret) { + dev_err(&pdev->dev, + "failed to add resources for ocp2scp child\n"); + goto err1; + } + + pdev_child->dev.parent = &pdev->dev; + + ret = platform_device_add(pdev_child); + if (ret) { + dev_err(&pdev->dev, + "failed to register ocp2scp child device\n"); + goto err1; + } + } + } else { + dev_err(&pdev->dev, "OCP2SCP initialized without plat data\n"); + return -EINVAL; } + pm_runtime_enable(&pdev->dev); return 0; +err1: + platform_device_put(pdev_child); + err0: device_for_each_child(&pdev->dev, NULL, ocp2scp_remove_devices); diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c index ca4a25ed844..e2c17d187d9 100644 --- a/drivers/clk/ux500/u8500_clk.c +++ b/drivers/clk/ux500/u8500_clk.c @@ -40,7 +40,7 @@ void u8500_clk_init(void) CLK_IS_ROOT|CLK_IGNORE_UNUSED, 32768); clk_register_clkdev(clk, "clk32k", NULL); - clk_register_clkdev(clk, NULL, "rtc-pl031"); + clk_register_clkdev(clk, "apb_pclk", "rtc-pl031"); /* PRCMU clocks */ fw_version = prcmu_get_fw_version(); @@ -228,10 +228,17 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p1_pclk2", "per1clk", U8500_CLKRST1_BASE, BIT(2), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.1"); + clk = clk_reg_prcc_pclk("p1_pclk3", "per1clk", U8500_CLKRST1_BASE, BIT(3), 0); + clk_register_clkdev(clk, "apb_pclk", "msp0"); + clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.0"); + clk = clk_reg_prcc_pclk("p1_pclk4", "per1clk", U8500_CLKRST1_BASE, BIT(4), 0); + clk_register_clkdev(clk, "apb_pclk", "msp1"); + clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.1"); clk = clk_reg_prcc_pclk("p1_pclk5", "per1clk", U8500_CLKRST1_BASE, BIT(5), 0); @@ -239,6 +246,7 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p1_pclk6", "per1clk", U8500_CLKRST1_BASE, BIT(6), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.2"); clk = clk_reg_prcc_pclk("p1_pclk7", "per1clk", U8500_CLKRST1_BASE, BIT(7), 0); @@ -246,6 +254,7 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p1_pclk8", "per1clk", U8500_CLKRST1_BASE, BIT(8), 0); + clk_register_clkdev(clk, "apb_pclk", "slimbus0"); clk = clk_reg_prcc_pclk("p1_pclk9", "per1clk", U8500_CLKRST1_BASE, BIT(9), 0); @@ -255,11 +264,16 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p1_pclk10", "per1clk", U8500_CLKRST1_BASE, BIT(10), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.4"); + clk = clk_reg_prcc_pclk("p1_pclk11", "per1clk", U8500_CLKRST1_BASE, BIT(11), 0); + clk_register_clkdev(clk, "apb_pclk", "msp3"); + clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.3"); clk = clk_reg_prcc_pclk("p2_pclk0", "per2clk", U8500_CLKRST2_BASE, BIT(0), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.3"); clk = clk_reg_prcc_pclk("p2_pclk1", "per2clk", U8500_CLKRST2_BASE, BIT(1), 0); @@ -279,12 +293,13 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p2_pclk5", "per2clk", U8500_CLKRST2_BASE, BIT(5), 0); + clk_register_clkdev(clk, "apb_pclk", "msp2"); + clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.2"); clk = clk_reg_prcc_pclk("p2_pclk6", "per2clk", U8500_CLKRST2_BASE, BIT(6), 0); clk_register_clkdev(clk, "apb_pclk", "sdi1"); - clk = clk_reg_prcc_pclk("p2_pclk7", "per2clk", U8500_CLKRST2_BASE, BIT(7), 0); clk_register_clkdev(clk, "apb_pclk", "sdi3"); @@ -316,10 +331,15 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p3_pclk1", "per3clk", U8500_CLKRST3_BASE, BIT(1), 0); + clk_register_clkdev(clk, "apb_pclk", "ssp0"); + clk = clk_reg_prcc_pclk("p3_pclk2", "per3clk", U8500_CLKRST3_BASE, BIT(2), 0); + clk_register_clkdev(clk, "apb_pclk", "ssp1"); + clk = clk_reg_prcc_pclk("p3_pclk3", "per3clk", U8500_CLKRST3_BASE, BIT(3), 0); + clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.0"); clk = clk_reg_prcc_pclk("p3_pclk4", "per3clk", U8500_CLKRST3_BASE, BIT(4), 0); @@ -401,10 +421,17 @@ void u8500_clk_init(void) clk = clk_reg_prcc_kclk("p1_i2c1_kclk", "i2cclk", U8500_CLKRST1_BASE, BIT(2), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.1"); + clk = clk_reg_prcc_kclk("p1_msp0_kclk", "msp02clk", U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "msp0"); + clk_register_clkdev(clk, NULL, "ux500-msp-i2s.0"); + clk = clk_reg_prcc_kclk("p1_msp1_kclk", "msp1clk", U8500_CLKRST1_BASE, BIT(4), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "msp1"); + clk_register_clkdev(clk, NULL, "ux500-msp-i2s.1"); clk = clk_reg_prcc_kclk("p1_sdi0_kclk", "sdmmcclk", U8500_CLKRST1_BASE, BIT(5), CLK_SET_RATE_GATE); @@ -412,17 +439,25 @@ void u8500_clk_init(void) clk = clk_reg_prcc_kclk("p1_i2c2_kclk", "i2cclk", U8500_CLKRST1_BASE, BIT(6), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.2"); + clk = clk_reg_prcc_kclk("p1_slimbus0_kclk", "slimclk", - U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE); - /* FIXME: Redefinition of BIT(3). */ + U8500_CLKRST1_BASE, BIT(8), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "slimbus0"); + clk = clk_reg_prcc_kclk("p1_i2c4_kclk", "i2cclk", U8500_CLKRST1_BASE, BIT(9), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.4"); + clk = clk_reg_prcc_kclk("p1_msp3_kclk", "msp1clk", U8500_CLKRST1_BASE, BIT(10), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "msp3"); + clk_register_clkdev(clk, NULL, "ux500-msp-i2s.3"); /* Periph2 */ clk = clk_reg_prcc_kclk("p2_i2c3_kclk", "i2cclk", U8500_CLKRST2_BASE, BIT(0), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.3"); clk = clk_reg_prcc_kclk("p2_sdi4_kclk", "sdmmcclk", U8500_CLKRST2_BASE, BIT(2), CLK_SET_RATE_GATE); @@ -430,6 +465,8 @@ void u8500_clk_init(void) clk = clk_reg_prcc_kclk("p2_msp2_kclk", "msp02clk", U8500_CLKRST2_BASE, BIT(3), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "msp2"); + clk_register_clkdev(clk, NULL, "ux500-msp-i2s.2"); clk = clk_reg_prcc_kclk("p2_sdi1_kclk", "sdmmcclk", U8500_CLKRST2_BASE, BIT(4), CLK_SET_RATE_GATE); @@ -450,10 +487,15 @@ void u8500_clk_init(void) /* Periph3 */ clk = clk_reg_prcc_kclk("p3_ssp0_kclk", "sspclk", U8500_CLKRST3_BASE, BIT(1), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "ssp0"); + clk = clk_reg_prcc_kclk("p3_ssp1_kclk", "sspclk", U8500_CLKRST3_BASE, BIT(2), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "ssp1"); + clk = clk_reg_prcc_kclk("p3_i2c0_kclk", "i2cclk", U8500_CLKRST3_BASE, BIT(3), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "nmk-i2c.0"); clk = clk_reg_prcc_kclk("p3_sdi2_kclk", "sdmmcclk", U8500_CLKRST3_BASE, BIT(4), CLK_SET_RATE_GATE); diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index f11d8e3b404..6dbc4031f82 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -152,7 +152,7 @@ config GPIO_MSM_V2 config GPIO_MVEBU def_bool y - depends on ARCH_MVEBU + depends on PLAT_ORION select GPIO_GENERIC select GENERIC_IRQ_CHIP diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index b726b478a4f..6345878ae1e 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -143,7 +143,7 @@ static void intel_crt_dpms(struct drm_connector *connector, int mode) int old_dpms; /* PCH platforms and VLV only support on/off. */ - if (INTEL_INFO(dev)->gen < 5 && mode != DRM_MODE_DPMS_ON) + if (INTEL_INFO(dev)->gen >= 5 && mode != DRM_MODE_DPMS_ON) mode = DRM_MODE_DPMS_OFF; if (mode == connector->dpms) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 461a637f1ef..4154bcd7a07 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -3841,6 +3841,17 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, } } + if (intel_encoder->type == INTEL_OUTPUT_EDP) { + /* Use VBT settings if we have an eDP panel */ + unsigned int edp_bpc = dev_priv->edp.bpp / 3; + + if (edp_bpc < display_bpc) { + DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc); + display_bpc = edp_bpc; + } + continue; + } + /* * HDMI is either 12 or 8, so if the display lets 10bpc sneak * through, clamp it down. (Note: >12bpc will be caught below.) diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 79d308da29f..c600fb06e25 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -2382,6 +2382,18 @@ intel_sdvo_output_setup(struct intel_sdvo *intel_sdvo, uint16_t flags) return true; } +static void intel_sdvo_output_cleanup(struct intel_sdvo *intel_sdvo) +{ + struct drm_device *dev = intel_sdvo->base.base.dev; + struct drm_connector *connector, *tmp; + + list_for_each_entry_safe(connector, tmp, + &dev->mode_config.connector_list, head) { + if (intel_attached_encoder(connector) == &intel_sdvo->base) + intel_sdvo_destroy(connector); + } +} + static bool intel_sdvo_tv_create_property(struct intel_sdvo *intel_sdvo, struct intel_sdvo_connector *intel_sdvo_connector, int type) @@ -2705,7 +2717,8 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob) intel_sdvo->caps.output_flags) != true) { DRM_DEBUG_KMS("SDVO output failed to setup on %s\n", SDVO_NAME(intel_sdvo)); - goto err; + /* Output_setup can leave behind connectors! */ + goto err_output; } /* Only enable the hotplug irq if we need it, to work around noisy @@ -2718,12 +2731,12 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob) /* Set the input timing to the screen. Assume always input 0. */ if (!intel_sdvo_set_target_input(intel_sdvo)) - goto err; + goto err_output; if (!intel_sdvo_get_input_pixel_clock_range(intel_sdvo, &intel_sdvo->pixel_clock_min, &intel_sdvo->pixel_clock_max)) - goto err; + goto err_output; DRM_DEBUG_KMS("%s device VID/DID: %02X:%02X.%02X, " "clock range %dMHz - %dMHz, " @@ -2743,6 +2756,9 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob) (SDVO_OUTPUT_TMDS1 | SDVO_OUTPUT_RGB1) ? 'Y' : 'N'); return true; +err_output: + intel_sdvo_output_cleanup(intel_sdvo); + err: drm_encoder_cleanup(&intel_encoder->base); i2c_del_adapter(&intel_sdvo->ddc); diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c index ba498f8e47a..010bae19554 100644 --- a/drivers/gpu/drm/radeon/atombios_encoders.c +++ b/drivers/gpu/drm/radeon/atombios_encoders.c @@ -1625,7 +1625,7 @@ radeon_atom_encoder_dpms_dig(struct drm_encoder *encoder, int mode) atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_SETUP, 0, 0); atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0); /* some early dce3.2 boards have a bug in their transmitter control table */ - if ((rdev->family != CHIP_RV710) || (rdev->family != CHIP_RV730)) + if ((rdev->family != CHIP_RV710) && (rdev->family != CHIP_RV730)) atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0); } if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(encoder)) && connector) { diff --git a/drivers/gpu/drm/ttm/ttm_page_alloc.c b/drivers/gpu/drm/ttm/ttm_page_alloc.c index 860dc4813e9..bd2a3b40cd1 100644 --- a/drivers/gpu/drm/ttm/ttm_page_alloc.c +++ b/drivers/gpu/drm/ttm/ttm_page_alloc.c @@ -749,7 +749,10 @@ static int ttm_get_pages(struct page **pages, unsigned npages, int flags, /* clear the pages coming from the pool if requested */ if (flags & TTM_PAGE_FLAG_ZERO_ALLOC) { list_for_each_entry(p, &plist, lru) { - clear_page(page_address(p)); + if (PageHighMem(p)) + clear_highpage(p); + else + clear_page(page_address(p)); } } diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c index bf8260133ea..7d759a43029 100644 --- a/drivers/gpu/drm/ttm/ttm_tt.c +++ b/drivers/gpu/drm/ttm/ttm_tt.c @@ -308,9 +308,7 @@ int ttm_tt_swapin(struct ttm_tt *ttm) if (unlikely(to_page == NULL)) goto out_err; - preempt_disable(); copy_highpage(to_page, from_page); - preempt_enable(); page_cache_release(from_page); } @@ -358,9 +356,7 @@ int ttm_tt_swapout(struct ttm_tt *ttm, struct file *persistent_swap_storage) ret = PTR_ERR(to_page); goto out_err; } - preempt_disable(); copy_highpage(to_page, from_page); - preempt_enable(); set_page_dirty(to_page); mark_page_accessed(to_page); page_cache_release(to_page); diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c index b07ca2e4d04..7290811f89b 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c @@ -110,6 +110,8 @@ int vmw_get_cap_3d_ioctl(struct drm_device *dev, void *data, memcpy_fromio(bounce, &fifo_mem[SVGA_FIFO_3D_CAPS], size); ret = copy_to_user(buffer, bounce, size); + if (ret) + ret = -EFAULT; vfree(bounce); if (unlikely(ret != 0)) diff --git a/drivers/hid/hid-microsoft.c b/drivers/hid/hid-microsoft.c index f676c01bb47..6fcd466d082 100644 --- a/drivers/hid/hid-microsoft.c +++ b/drivers/hid/hid-microsoft.c @@ -46,9 +46,9 @@ static __u8 *ms_report_fixup(struct hid_device *hdev, __u8 *rdesc, rdesc[559] = 0x45; } /* the same as above (s/usage/physical/) */ - if ((quirks & MS_RDESC_3K) && *rsize == 106 && - !memcmp((char []){ 0x19, 0x00, 0x29, 0xff }, - &rdesc[94], 4)) { + if ((quirks & MS_RDESC_3K) && *rsize == 106 && rdesc[94] == 0x19 && + rdesc[95] == 0x00 && rdesc[96] == 0x29 && + rdesc[97] == 0xff) { rdesc[94] = 0x35; rdesc[96] = 0x45; } diff --git a/drivers/i2c/muxes/i2c-mux-pinctrl.c b/drivers/i2c/muxes/i2c-mux-pinctrl.c index 5f097f309b9..7fa5b24b16d 100644 --- a/drivers/i2c/muxes/i2c-mux-pinctrl.c +++ b/drivers/i2c/muxes/i2c-mux-pinctrl.c @@ -169,7 +169,7 @@ static int __devinit i2c_mux_pinctrl_probe(struct platform_device *pdev) mux->busses = devm_kzalloc(&pdev->dev, sizeof(mux->busses) * mux->pdata->bus_count, GFP_KERNEL); - if (!mux->states) { + if (!mux->busses) { dev_err(&pdev->dev, "Cannot allocate busses\n"); ret = -ENOMEM; goto err; diff --git a/drivers/irqchip/irq-bcm2835.c b/drivers/irqchip/irq-bcm2835.c index dc670ccc697..16c78f1c5ef 100644 --- a/drivers/irqchip/irq-bcm2835.c +++ b/drivers/irqchip/irq-bcm2835.c @@ -168,7 +168,8 @@ static int __init armctrl_of_init(struct device_node *node, } static struct of_device_id irq_of_match[] __initconst = { - { .compatible = "brcm,bcm2835-armctrl-ic", .data = armctrl_of_init } + { .compatible = "brcm,bcm2835-armctrl-ic", .data = armctrl_of_init }, + { } }; void __init bcm2835_init_irq(void) diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index f508defc0d9..b58bc8a14b9 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -379,7 +379,9 @@ config LEDS_NS2 tristate "LED support for Network Space v2 GPIO LEDs" depends on LEDS_CLASS depends on MACH_NETSPACE_V2 || MACH_INETSPACE_V2 || \ - MACH_NETSPACE_MAX_V2 || MACH_D2NET_V2 + MACH_NETSPACE_MAX_V2 || MACH_D2NET_V2 || \ + MACH_NETSPACE_V2_DT || MACH_INETSPACE_V2_DT || \ + MACH_NETSPACE_MAX_V2_DT || MACH_NETSPACE_MINI_V2_DT default y help This option enable support for the dual-GPIO LED found on the diff --git a/drivers/leds/leds-ns2.c b/drivers/leds/leds-ns2.c index d176ec83f5d..d64cc2227fd 100644 --- a/drivers/leds/leds-ns2.c +++ b/drivers/leds/leds-ns2.c @@ -30,6 +30,7 @@ #include <linux/leds.h> #include <linux/module.h> #include <linux/platform_data/leds-kirkwood-ns2.h> +#include <linux/of_gpio.h> /* * The Network Space v2 dual-GPIO LED is wired to a CPLD and can blink in @@ -263,6 +264,62 @@ static void delete_ns2_led(struct ns2_led_data *led_dat) gpio_free(led_dat->slow); } +#ifdef CONFIG_OF_GPIO +/* + * Translate OpenFirmware node properties into platform_data. + */ +static int __devinit +ns2_leds_get_of_pdata(struct device *dev, struct ns2_led_platform_data *pdata) +{ + struct device_node *np = dev->of_node; + struct device_node *child; + struct ns2_led *leds; + int num_leds = 0; + int i = 0; + + num_leds = of_get_child_count(np); + if (!num_leds) + return -ENODEV; + + leds = devm_kzalloc(dev, num_leds * sizeof(struct ns2_led), + GFP_KERNEL); + if (!leds) + return -ENOMEM; + + for_each_child_of_node(np, child) { + const char *string; + int ret; + + ret = of_get_named_gpio(child, "cmd-gpio", 0); + if (ret < 0) + return ret; + leds[i].cmd = ret; + ret = of_get_named_gpio(child, "slow-gpio", 0); + if (ret < 0) + return ret; + leds[i].slow = ret; + ret = of_property_read_string(child, "label", &string); + leds[i].name = (ret == 0) ? string : child->name; + ret = of_property_read_string(child, "linux,default-trigger", + &string); + if (ret == 0) + leds[i].default_trigger = string; + + i++; + } + + pdata->leds = leds; + pdata->num_leds = num_leds; + + return 0; +} + +static const struct of_device_id of_ns2_leds_match[] = { + { .compatible = "lacie,ns2-leds", }, + {}, +}; +#endif /* CONFIG_OF_GPIO */ + static int __devinit ns2_led_probe(struct platform_device *pdev) { struct ns2_led_platform_data *pdata = pdev->dev.platform_data; @@ -270,11 +327,25 @@ static int __devinit ns2_led_probe(struct platform_device *pdev) int i; int ret; +#ifdef CONFIG_OF_GPIO + if (!pdata) { + pdata = devm_kzalloc(&pdev->dev, + sizeof(struct ns2_led_platform_data), + GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + ret = ns2_leds_get_of_pdata(&pdev->dev, pdata); + if (ret) + return ret; + } +#else if (!pdata) return -EINVAL; +#endif /* CONFIG_OF_GPIO */ leds_data = devm_kzalloc(&pdev->dev, sizeof(struct ns2_led_data) * - pdata->num_leds, GFP_KERNEL); + pdata->num_leds, GFP_KERNEL); if (!leds_data) return -ENOMEM; @@ -312,8 +383,9 @@ static struct platform_driver ns2_led_driver = { .probe = ns2_led_probe, .remove = __devexit_p(ns2_led_remove), .driver = { - .name = "leds-ns2", - .owner = THIS_MODULE, + .name = "leds-ns2", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(of_ns2_leds_match), }, }; diff --git a/drivers/leds/ledtrig-cpu.c b/drivers/leds/ledtrig-cpu.c index b312056da14..4239b3955ff 100644 --- a/drivers/leds/ledtrig-cpu.c +++ b/drivers/leds/ledtrig-cpu.c @@ -33,8 +33,6 @@ struct led_trigger_cpu { char name[MAX_NAME_LEN]; struct led_trigger *_trig; - struct mutex lock; - int lock_is_inited; }; static DEFINE_PER_CPU(struct led_trigger_cpu, cpu_trig); @@ -50,12 +48,6 @@ void ledtrig_cpu(enum cpu_led_event ledevt) { struct led_trigger_cpu *trig = &__get_cpu_var(cpu_trig); - /* mutex lock should be initialized before calling mutex_call() */ - if (!trig->lock_is_inited) - return; - - mutex_lock(&trig->lock); - /* Locate the correct CPU LED */ switch (ledevt) { case CPU_LED_IDLE_END: @@ -75,8 +67,6 @@ void ledtrig_cpu(enum cpu_led_event ledevt) /* Will leave the LED as it is */ break; } - - mutex_unlock(&trig->lock); } EXPORT_SYMBOL(ledtrig_cpu); @@ -117,14 +107,9 @@ static int __init ledtrig_cpu_init(void) for_each_possible_cpu(cpu) { struct led_trigger_cpu *trig = &per_cpu(cpu_trig, cpu); - mutex_init(&trig->lock); - snprintf(trig->name, MAX_NAME_LEN, "cpu%d", cpu); - mutex_lock(&trig->lock); led_trigger_register_simple(trig->name, &trig->_trig); - trig->lock_is_inited = 1; - mutex_unlock(&trig->lock); } register_syscore_ops(&ledtrig_cpu_syscore_ops); @@ -142,15 +127,9 @@ static void __exit ledtrig_cpu_exit(void) for_each_possible_cpu(cpu) { struct led_trigger_cpu *trig = &per_cpu(cpu_trig, cpu); - mutex_lock(&trig->lock); - led_trigger_unregister_simple(trig->_trig); trig->_trig = NULL; memset(trig->name, 0, MAX_NAME_LEN); - trig->lock_is_inited = 0; - - mutex_unlock(&trig->lock); - mutex_destroy(&trig->lock); } unregister_syscore_ops(&ledtrig_cpu_syscore_ops); diff --git a/drivers/net/ethernet/jme.c b/drivers/net/ethernet/jme.c index 92317e9c0f7..60ac46f4ac0 100644 --- a/drivers/net/ethernet/jme.c +++ b/drivers/net/ethernet/jme.c @@ -1860,10 +1860,14 @@ jme_open(struct net_device *netdev) jme_clear_pm(jme); JME_NAPI_ENABLE(jme); - tasklet_enable(&jme->linkch_task); - tasklet_enable(&jme->txclean_task); - tasklet_hi_enable(&jme->rxclean_task); - tasklet_hi_enable(&jme->rxempty_task); + tasklet_init(&jme->linkch_task, jme_link_change_tasklet, + (unsigned long) jme); + tasklet_init(&jme->txclean_task, jme_tx_clean_tasklet, + (unsigned long) jme); + tasklet_init(&jme->rxclean_task, jme_rx_clean_tasklet, + (unsigned long) jme); + tasklet_init(&jme->rxempty_task, jme_rx_empty_tasklet, + (unsigned long) jme); rc = jme_request_irq(jme); if (rc) @@ -3079,22 +3083,6 @@ jme_init_one(struct pci_dev *pdev, tasklet_init(&jme->pcc_task, jme_pcc_tasklet, (unsigned long) jme); - tasklet_init(&jme->linkch_task, - jme_link_change_tasklet, - (unsigned long) jme); - tasklet_init(&jme->txclean_task, - jme_tx_clean_tasklet, - (unsigned long) jme); - tasklet_init(&jme->rxclean_task, - jme_rx_clean_tasklet, - (unsigned long) jme); - tasklet_init(&jme->rxempty_task, - jme_rx_empty_tasklet, - (unsigned long) jme); - tasklet_disable_nosync(&jme->linkch_task); - tasklet_disable_nosync(&jme->txclean_task); - tasklet_disable_nosync(&jme->rxclean_task); - tasklet_disable_nosync(&jme->rxempty_task); jme->dpi.cur = PCC_P1; jme->reg_ghc = 0; diff --git a/drivers/net/ethernet/micrel/ksz884x.c b/drivers/net/ethernet/micrel/ksz884x.c index e558edd1cb6..69e01977a1d 100644 --- a/drivers/net/ethernet/micrel/ksz884x.c +++ b/drivers/net/ethernet/micrel/ksz884x.c @@ -5459,8 +5459,10 @@ static int prepare_hardware(struct net_device *dev) rc = request_irq(dev->irq, netdev_intr, IRQF_SHARED, dev->name, dev); if (rc) return rc; - tasklet_enable(&hw_priv->rx_tasklet); - tasklet_enable(&hw_priv->tx_tasklet); + tasklet_init(&hw_priv->rx_tasklet, rx_proc_task, + (unsigned long) hw_priv); + tasklet_init(&hw_priv->tx_tasklet, tx_proc_task, + (unsigned long) hw_priv); hw->promiscuous = 0; hw->all_multi = 0; @@ -7033,16 +7035,6 @@ static int __devinit pcidev_init(struct pci_dev *pdev, spin_lock_init(&hw_priv->hwlock); mutex_init(&hw_priv->lock); - /* tasklet is enabled. */ - tasklet_init(&hw_priv->rx_tasklet, rx_proc_task, - (unsigned long) hw_priv); - tasklet_init(&hw_priv->tx_tasklet, tx_proc_task, - (unsigned long) hw_priv); - - /* tasklet_enable will decrement the atomic counter. */ - tasklet_disable(&hw_priv->rx_tasklet); - tasklet_disable(&hw_priv->tx_tasklet); - for (i = 0; i < TOTAL_PORT_NUM; i++) init_waitqueue_head(&hw_priv->counter[i].counter); diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c index 62d1baf111e..c53c0f4e2ce 100644 --- a/drivers/net/ethernet/smsc/smsc911x.c +++ b/drivers/net/ethernet/smsc/smsc911x.c @@ -2110,7 +2110,7 @@ static void __devinit smsc911x_read_mac_address(struct net_device *dev) static int __devinit smsc911x_init(struct net_device *dev) { struct smsc911x_data *pdata = netdev_priv(dev); - unsigned int byte_test; + unsigned int byte_test, mask; unsigned int to = 100; SMSC_TRACE(pdata, probe, "Driver Parameters:"); @@ -2130,9 +2130,22 @@ static int __devinit smsc911x_init(struct net_device *dev) /* * poll the READY bit in PMT_CTRL. Any other access to the device is * forbidden while this bit isn't set. Try for 100ms + * + * Note that this test is done before the WORD_SWAP register is + * programmed. So in some configurations the READY bit is at 16 before + * WORD_SWAP is written to. This issue is worked around by waiting + * until either bit 0 or bit 16 gets set in PMT_CTRL. + * + * SMSC has confirmed that checking bit 16 (marked as reserved in + * the datasheet) is fine since these bits "will either never be set + * or can only go high after READY does (so also indicate the device + * is ready)". */ - while (!(smsc911x_reg_read(pdata, PMT_CTRL) & PMT_CTRL_READY_) && --to) + + mask = PMT_CTRL_READY_ | swahw32(PMT_CTRL_READY_); + while (!(smsc911x_reg_read(pdata, PMT_CTRL) & mask) && --to) udelay(1000); + if (to == 0) { pr_err("Device not READY in 100ms aborting\n"); return -ENODEV; diff --git a/drivers/net/ethernet/tile/tilegx.c b/drivers/net/ethernet/tile/tilegx.c index 4e981001385..66e025ad5df 100644 --- a/drivers/net/ethernet/tile/tilegx.c +++ b/drivers/net/ethernet/tile/tilegx.c @@ -917,7 +917,7 @@ static int tile_net_setup_interrupts(struct net_device *dev) ingress_irq = rc; tile_irq_activate(ingress_irq, TILE_IRQ_PERCPU); rc = request_irq(ingress_irq, tile_net_handle_ingress_irq, - 0, NULL, NULL); + 0, "tile_net", NULL); if (rc != 0) { netdev_err(dev, "request_irq failed: %d\n", rc); destroy_irq(ingress_irq); diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index 1d04754a663..77e6db9dcfe 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -942,6 +942,10 @@ static int axienet_open(struct net_device *ndev) phy_start(lp->phy_dev); } + /* Enable tasklets for Axi DMA error handling */ + tasklet_init(&lp->dma_err_tasklet, axienet_dma_err_handler, + (unsigned long) lp); + /* Enable interrupts for Axi DMA Tx */ ret = request_irq(lp->tx_irq, axienet_tx_irq, 0, ndev->name, ndev); if (ret) @@ -950,8 +954,7 @@ static int axienet_open(struct net_device *ndev) ret = request_irq(lp->rx_irq, axienet_rx_irq, 0, ndev->name, ndev); if (ret) goto err_rx_irq; - /* Enable tasklets for Axi DMA error handling */ - tasklet_enable(&lp->dma_err_tasklet); + return 0; err_rx_irq: @@ -960,6 +963,7 @@ err_tx_irq: if (lp->phy_dev) phy_disconnect(lp->phy_dev); lp->phy_dev = NULL; + tasklet_kill(&lp->dma_err_tasklet); dev_err(lp->dev, "request_irq() failed\n"); return ret; } @@ -1613,10 +1617,6 @@ static int __devinit axienet_of_probe(struct platform_device *op) goto err_iounmap_2; } - tasklet_init(&lp->dma_err_tasklet, axienet_dma_err_handler, - (unsigned long) lp); - tasklet_disable(&lp->dma_err_tasklet); - return 0; err_iounmap_2: diff --git a/drivers/net/phy/mdio-bitbang.c b/drivers/net/phy/mdio-bitbang.c index 6428fcbbdd4..daec9b05d16 100644 --- a/drivers/net/phy/mdio-bitbang.c +++ b/drivers/net/phy/mdio-bitbang.c @@ -234,7 +234,6 @@ void free_mdio_bitbang(struct mii_bus *bus) struct mdiobb_ctrl *ctrl = bus->priv; module_put(ctrl->ops->owner); - mdiobus_unregister(bus); mdiobus_free(bus); } EXPORT_SYMBOL(free_mdio_bitbang); diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 4cd582a4f62..74fab1a4015 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -540,10 +540,12 @@ advance: (ctx->ether_desc == NULL) || (ctx->control != intf)) goto error; - /* claim interfaces, if any */ - temp = usb_driver_claim_interface(driver, ctx->data, dev); - if (temp) - goto error; + /* claim data interface, if different from control */ + if (ctx->data != ctx->control) { + temp = usb_driver_claim_interface(driver, ctx->data, dev); + if (temp) + goto error; + } iface_no = ctx->data->cur_altsetting->desc.bInterfaceNumber; @@ -623,6 +625,10 @@ static void cdc_ncm_unbind(struct usbnet *dev, struct usb_interface *intf) tasklet_kill(&ctx->bh); + /* handle devices with combined control and data interface */ + if (ctx->control == ctx->data) + ctx->data = NULL; + /* disconnect master --> disconnect slave */ if (intf == ctx->control && ctx->data) { usb_set_intfdata(ctx->data, NULL); @@ -1245,6 +1251,14 @@ static const struct usb_device_id cdc_devs[] = { .driver_info = (unsigned long) &wwan_info, }, + /* Huawei NCM devices disguised as vendor specific */ + { USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x16), + .driver_info = (unsigned long)&wwan_info, + }, + { USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x46), + .driver_info = (unsigned long)&wwan_info, + }, + /* Generic CDC-NCM devices */ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE), diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 3286166415b..362cb8cfeb9 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -184,7 +184,7 @@ static int smsc95xx_mdio_read(struct net_device *netdev, int phy_id, int idx) /* set the address, index & direction (read from PHY) */ phy_id &= dev->mii.phy_id_mask; idx &= dev->mii.reg_num_mask; - addr = (phy_id << 11) | (idx << 6) | MII_READ_; + addr = (phy_id << 11) | (idx << 6) | MII_READ_ | MII_BUSY_; ret = smsc95xx_write_reg(dev, MII_ADDR, addr); check_warn_goto_done(ret, "Error writing MII_ADDR"); @@ -221,7 +221,7 @@ static void smsc95xx_mdio_write(struct net_device *netdev, int phy_id, int idx, /* set the address, index & direction (write to PHY) */ phy_id &= dev->mii.phy_id_mask; idx &= dev->mii.reg_num_mask; - addr = (phy_id << 11) | (idx << 6) | MII_WRITE_; + addr = (phy_id << 11) | (idx << 6) | MII_WRITE_ | MII_BUSY_; ret = smsc95xx_write_reg(dev, MII_ADDR, addr); check_warn_goto_done(ret, "Error writing MII_ADDR"); diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 7b4adde93c0..8b5c6191707 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -1,5 +1,5 @@ /* - * VXLAN: Virtual eXtensiable Local Area Network + * VXLAN: Virtual eXtensible Local Area Network * * Copyright (c) 2012 Vyatta Inc. * @@ -50,8 +50,8 @@ #define VXLAN_N_VID (1u << 24) #define VXLAN_VID_MASK (VXLAN_N_VID - 1) -/* VLAN + IP header + UDP + VXLAN */ -#define VXLAN_HEADROOM (4 + 20 + 8 + 8) +/* IP header + UDP + VXLAN + Ethernet header */ +#define VXLAN_HEADROOM (20 + 8 + 8 + 14) #define VXLAN_FLAGS 0x08000000 /* struct vxlanhdr.vx_flags required value. */ @@ -1102,6 +1102,10 @@ static int vxlan_newlink(struct net *net, struct net_device *dev, if (!tb[IFLA_MTU]) dev->mtu = lowerdev->mtu - VXLAN_HEADROOM; + + /* update header length based on lower device */ + dev->hard_header_len = lowerdev->hard_header_len + + VXLAN_HEADROOM; } if (data[IFLA_VXLAN_TOS]) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index a6f1e816600..481345c23de 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -4401,7 +4401,7 @@ static s32 brcmf_mode_to_nl80211_iftype(s32 mode) static void brcmf_wiphy_pno_params(struct wiphy *wiphy) { -#ifndef CONFIG_BRCMFISCAN +#ifndef CONFIG_BRCMISCAN /* scheduled scan settings */ wiphy->max_sched_scan_ssids = BRCMF_PNO_MAX_PFN_COUNT; wiphy->max_match_sets = BRCMF_PNO_MAX_PFN_COUNT; diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index ff8162d4c45..fa4d1b8cd9f 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -521,7 +521,7 @@ static void iwlagn_mac_tx(struct ieee80211_hw *hw, ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate); if (iwlagn_tx_skb(priv, control->sta, skb)) - dev_kfree_skb_any(skb); + ieee80211_free_txskb(hw, skb); } static void iwlagn_mac_update_tkip_key(struct ieee80211_hw *hw, diff --git a/drivers/net/wireless/iwlwifi/dvm/main.c b/drivers/net/wireless/iwlwifi/dvm/main.c index 7ff3f143067..408132cf83c 100644 --- a/drivers/net/wireless/iwlwifi/dvm/main.c +++ b/drivers/net/wireless/iwlwifi/dvm/main.c @@ -2114,7 +2114,7 @@ static void iwl_free_skb(struct iwl_op_mode *op_mode, struct sk_buff *skb) info = IEEE80211_SKB_CB(skb); iwl_trans_free_tx_cmd(priv->trans, info->driver_data[1]); - dev_kfree_skb_any(skb); + ieee80211_free_txskb(priv->hw, skb); } static void iwl_set_hw_rfkill_state(struct iwl_op_mode *op_mode, bool state) diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c index 17c8e5d8268..bb69f8f90b3 100644 --- a/drivers/net/wireless/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/iwlwifi/pcie/rx.c @@ -321,6 +321,14 @@ static void iwl_rx_allocate(struct iwl_trans *trans, gfp_t priority) dma_map_page(trans->dev, page, 0, PAGE_SIZE << trans_pcie->rx_page_order, DMA_FROM_DEVICE); + if (dma_mapping_error(trans->dev, rxb->page_dma)) { + rxb->page = NULL; + spin_lock_irqsave(&rxq->lock, flags); + list_add(&rxb->list, &rxq->rx_used); + spin_unlock_irqrestore(&rxq->lock, flags); + __free_pages(page, trans_pcie->rx_page_order); + return; + } /* dma address must be no more than 36 bits */ BUG_ON(rxb->page_dma & ~DMA_BIT_MASK(36)); /* and also 256 byte aligned! */ @@ -488,8 +496,19 @@ static void iwl_rx_handle_rxbuf(struct iwl_trans *trans, dma_map_page(trans->dev, rxb->page, 0, PAGE_SIZE << trans_pcie->rx_page_order, DMA_FROM_DEVICE); - list_add_tail(&rxb->list, &rxq->rx_free); - rxq->free_count++; + if (dma_mapping_error(trans->dev, rxb->page_dma)) { + /* + * free the page(s) as well to not break + * the invariant that the items on the used + * list have no page(s) + */ + __free_pages(rxb->page, trans_pcie->rx_page_order); + rxb->page = NULL; + list_add_tail(&rxb->list, &rxq->rx_used); + } else { + list_add_tail(&rxb->list, &rxq->rx_free); + rxq->free_count++; + } } else list_add_tail(&rxb->list, &rxq->rx_used); spin_unlock_irqrestore(&rxq->lock, flags); diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index d96caefd914..011133772d2 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -188,27 +188,7 @@ config PINCTRL_EXYNOS4 depends on OF && GPIOLIB select PINCTRL_SAMSUNG -config PINCTRL_MVEBU - bool - depends on ARCH_MVEBU - select PINMUX - select PINCONF - -config PINCTRL_DOVE - bool - select PINCTRL_MVEBU - -config PINCTRL_KIRKWOOD - bool - select PINCTRL_MVEBU - -config PINCTRL_ARMADA_370 - bool - select PINCTRL_MVEBU - -config PINCTRL_ARMADA_XP - bool - select PINCTRL_MVEBU +source "drivers/pinctrl/mvebu/Kconfig" source "drivers/pinctrl/spear/Kconfig" diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index f395ba5cec2..3cb6a0a668a 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -36,12 +36,8 @@ obj-$(CONFIG_PINCTRL_U300) += pinctrl-u300.o obj-$(CONFIG_PINCTRL_COH901) += pinctrl-coh901.o obj-$(CONFIG_PINCTRL_SAMSUNG) += pinctrl-samsung.o obj-$(CONFIG_PINCTRL_EXYNOS4) += pinctrl-exynos.o -obj-$(CONFIG_PINCTRL_MVEBU) += pinctrl-mvebu.o -obj-$(CONFIG_PINCTRL_DOVE) += pinctrl-dove.o -obj-$(CONFIG_PINCTRL_KIRKWOOD) += pinctrl-kirkwood.o -obj-$(CONFIG_PINCTRL_ARMADA_370) += pinctrl-armada-370.o -obj-$(CONFIG_PINCTRL_ARMADA_XP) += pinctrl-armada-xp.o obj-$(CONFIG_PINCTRL_XWAY) += pinctrl-xway.o obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl-lantiq.o +obj-$(CONFIG_PLAT_ORION) += mvebu/ obj-$(CONFIG_PLAT_SPEAR) += spear/ diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index 2e39c04fc16..cec6072cd7c 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -563,6 +563,8 @@ static int add_setting(struct pinctrl *p, struct pinctrl_map const *map) return -EPROBE_DEFER; } + setting->dev_name = map->dev_name; + switch (map->type) { case PIN_MAP_TYPE_MUX_GROUP: ret = pinmux_map_to_setting(map, setting); diff --git a/drivers/pinctrl/core.h b/drivers/pinctrl/core.h index 1f40ff68a8c..12f5694f3d5 100644 --- a/drivers/pinctrl/core.h +++ b/drivers/pinctrl/core.h @@ -105,12 +105,14 @@ struct pinctrl_setting_configs { * @type: the type of setting * @pctldev: pin control device handling to be programmed. Not used for * PIN_MAP_TYPE_DUMMY_STATE. + * @dev_name: the name of the device using this state * @data: Data specific to the setting type */ struct pinctrl_setting { struct list_head node; enum pinctrl_map_type type; struct pinctrl_dev *pctldev; + const char *dev_name; union { struct pinctrl_setting_mux mux; struct pinctrl_setting_configs configs; diff --git a/drivers/pinctrl/mvebu/Kconfig b/drivers/pinctrl/mvebu/Kconfig new file mode 100644 index 00000000000..366fa541ee9 --- /dev/null +++ b/drivers/pinctrl/mvebu/Kconfig @@ -0,0 +1,24 @@ +if PLAT_ORION + +config PINCTRL_MVEBU + bool + select PINMUX + select PINCONF + +config PINCTRL_DOVE + bool + select PINCTRL_MVEBU + +config PINCTRL_KIRKWOOD + bool + select PINCTRL_MVEBU + +config PINCTRL_ARMADA_370 + bool + select PINCTRL_MVEBU + +config PINCTRL_ARMADA_XP + bool + select PINCTRL_MVEBU + +endif diff --git a/drivers/pinctrl/mvebu/Makefile b/drivers/pinctrl/mvebu/Makefile new file mode 100644 index 00000000000..37c253297af --- /dev/null +++ b/drivers/pinctrl/mvebu/Makefile @@ -0,0 +1,5 @@ +obj-$(CONFIG_PINCTRL_MVEBU) += pinctrl-mvebu.o +obj-$(CONFIG_PINCTRL_DOVE) += pinctrl-dove.o +obj-$(CONFIG_PINCTRL_KIRKWOOD) += pinctrl-kirkwood.o +obj-$(CONFIG_PINCTRL_ARMADA_370) += pinctrl-armada-370.o +obj-$(CONFIG_PINCTRL_ARMADA_XP) += pinctrl-armada-xp.o diff --git a/drivers/pinctrl/pinctrl-armada-370.c b/drivers/pinctrl/mvebu/pinctrl-armada-370.c index c907647de6a..c907647de6a 100644 --- a/drivers/pinctrl/pinctrl-armada-370.c +++ b/drivers/pinctrl/mvebu/pinctrl-armada-370.c diff --git a/drivers/pinctrl/pinctrl-armada-xp.c b/drivers/pinctrl/mvebu/pinctrl-armada-xp.c index 40bd52a46b4..40bd52a46b4 100644 --- a/drivers/pinctrl/pinctrl-armada-xp.c +++ b/drivers/pinctrl/mvebu/pinctrl-armada-xp.c diff --git a/drivers/pinctrl/pinctrl-dove.c b/drivers/pinctrl/mvebu/pinctrl-dove.c index ffe74b27d66..40c9c3eecd9 100644 --- a/drivers/pinctrl/pinctrl-dove.c +++ b/drivers/pinctrl/mvebu/pinctrl-dove.c @@ -22,22 +22,22 @@ #include "pinctrl-mvebu.h" -#define DOVE_SB_REGS_VIRT_BASE 0xfde00000 -#define DOVE_MPP_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0200) +#define DOVE_SB_REGS_VIRT_BASE IOMEM(0xfde00000) +#define DOVE_MPP_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0200) #define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10) #define DOVE_AU0_AC97_SEL BIT(16) -#define DOVE_GLOBAL_CONFIG_1 (DOVE_SB_REGS_VIRT_BASE | 0xe802C) +#define DOVE_GLOBAL_CONFIG_1 (DOVE_SB_REGS_VIRT_BASE + 0xe802C) #define DOVE_TWSI_ENABLE_OPTION1 BIT(7) -#define DOVE_GLOBAL_CONFIG_2 (DOVE_SB_REGS_VIRT_BASE | 0xe8030) +#define DOVE_GLOBAL_CONFIG_2 (DOVE_SB_REGS_VIRT_BASE + 0xe8030) #define DOVE_TWSI_ENABLE_OPTION2 BIT(20) #define DOVE_TWSI_ENABLE_OPTION3 BIT(21) #define DOVE_TWSI_OPTION3_GPIO BIT(22) -#define DOVE_SSP_CTRL_STATUS_1 (DOVE_SB_REGS_VIRT_BASE | 0xe8034) +#define DOVE_SSP_CTRL_STATUS_1 (DOVE_SB_REGS_VIRT_BASE + 0xe8034) #define DOVE_SSP_ON_AU1 BIT(0) -#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe803c) +#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe803c) #define DOVE_AU1_SPDIFO_GPIO_EN BIT(1) #define DOVE_NAND_GPIO_EN BIT(0) -#define DOVE_GPIO_LO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0400) +#define DOVE_GPIO_LO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0400) #define DOVE_MPP_CTRL4_VIRT_BASE (DOVE_GPIO_LO_VIRT_BASE + 0x40) #define DOVE_SPI_GPIO_SEL BIT(5) #define DOVE_UART1_GPIO_SEL BIT(4) @@ -234,6 +234,14 @@ static int dove_audio1_ctrl_set(struct mvebu_mpp_ctrl *ctrl, unsigned long gmpp = readl(DOVE_MPP_GENERAL_VIRT_BASE); unsigned long gcfg2 = readl(DOVE_GLOBAL_CONFIG_2); + /* + * clear all audio1 related bits before configure + */ + gcfg2 &= ~DOVE_TWSI_OPTION3_GPIO; + gmpp &= ~DOVE_AU1_SPDIFO_GPIO_EN; + sspc1 &= ~DOVE_SSP_ON_AU1; + mpp4 &= ~DOVE_AU1_GPIO_SEL; + if (config & BIT(0)) gcfg2 |= DOVE_TWSI_OPTION3_GPIO; if (config & BIT(1)) diff --git a/drivers/pinctrl/mvebu/pinctrl-kirkwood.c b/drivers/pinctrl/mvebu/pinctrl-kirkwood.c new file mode 100644 index 00000000000..fa6ce31c94d --- /dev/null +++ b/drivers/pinctrl/mvebu/pinctrl-kirkwood.c @@ -0,0 +1,484 @@ +/* + * Marvell Kirkwood pinctrl driver based on mvebu pinctrl core + * + * Author: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/pinctrl/pinctrl.h> + +#include "pinctrl-mvebu.h" + +#define V(f6180, f6190, f6192, f6281, f6282, dx4122) \ + ((f6180 << 0) | (f6190 << 1) | (f6192 << 2) | \ + (f6281 << 3) | (f6282 << 4) | (dx4122 << 5)) + +enum kirkwood_variant { + VARIANT_MV88F6180 = V(1, 0, 0, 0, 0, 0), + VARIANT_MV88F6190 = V(0, 1, 0, 0, 0, 0), + VARIANT_MV88F6192 = V(0, 0, 1, 0, 0, 0), + VARIANT_MV88F6281 = V(0, 0, 0, 1, 0, 0), + VARIANT_MV88F6282 = V(0, 0, 0, 0, 1, 0), + VARIANT_MV98DX4122 = V(0, 0, 0, 0, 0, 1), +}; + +static struct mvebu_mpp_mode mv88f6xxx_mpp_modes[] = { + MPP_MODE(0, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "nand", "io2", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "spi", "cs", V(1, 1, 1, 1, 1, 1))), + MPP_MODE(1, + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "nand", "io3", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "spi", "mosi", V(1, 1, 1, 1, 1, 1))), + MPP_MODE(2, + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "nand", "io4", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "spi", "sck", V(1, 1, 1, 1, 1, 1))), + MPP_MODE(3, + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "nand", "io5", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "spi", "miso", V(1, 1, 1, 1, 1, 1))), + MPP_MODE(4, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "nand", "io6", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "uart0", "rxd", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x5, "sata1", "act", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "hsync", V(0, 0, 0, 0, 1, 0)), + MPP_VAR_FUNCTION(0xd, "ptp", "clk", V(1, 1, 1, 1, 0, 0))), + MPP_MODE(5, + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "nand", "io7", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "uart0", "txd", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x4, "ptp", "trig", V(1, 1, 1, 1, 0, 0)), + MPP_VAR_FUNCTION(0x5, "sata0", "act", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "vsync", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(6, + MPP_VAR_FUNCTION(0x0, "sysrst", "out", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "spi", "mosi", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "ptp", "trig", V(1, 1, 1, 1, 0, 0))), + MPP_MODE(7, + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "pex", "rsto", V(1, 1, 1, 1, 0, 1)), + MPP_VAR_FUNCTION(0x2, "spi", "cs", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "ptp", "trig", V(1, 1, 1, 1, 0, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "pwm", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(8, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "twsi0", "sda", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "uart0", "rts", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "uart1", "rts", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x4, "mii-1", "rxerr", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x5, "sata1", "prsnt", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xc, "ptp", "clk", V(1, 1, 1, 1, 0, 0)), + MPP_VAR_FUNCTION(0xd, "mii", "col", V(1, 1, 1, 1, 1, 0))), + MPP_MODE(9, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "twsi0", "sck", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "uart0", "cts", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "uart1", "cts", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x5, "sata0", "prsnt", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xc, "ptp", "evreq", V(1, 1, 1, 1, 0, 0)), + MPP_VAR_FUNCTION(0xd, "mii", "crs", V(1, 1, 1, 1, 1, 0))), + MPP_MODE(10, + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "spi", "sck", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0X3, "uart0", "txd", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x5, "sata1", "act", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xc, "ptp", "trig", V(1, 1, 1, 1, 0, 0))), + MPP_MODE(11, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "spi", "miso", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "uart0", "rxd", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x4, "ptp-1", "evreq", V(1, 1, 1, 1, 0, 0)), + MPP_VAR_FUNCTION(0xc, "ptp-2", "trig", V(1, 1, 1, 1, 0, 0)), + MPP_VAR_FUNCTION(0xd, "ptp", "clk", V(1, 1, 1, 1, 0, 0)), + MPP_VAR_FUNCTION(0x5, "sata0", "act", V(0, 1, 1, 1, 1, 0))), + MPP_MODE(12, + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 0, 1, 0)), + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 0, 0)), + MPP_VAR_FUNCTION(0x1, "sdio", "clk", V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xa, "audio", "spdifo", V(0, 0, 0, 0, 1, 0)), + MPP_VAR_FUNCTION(0xb, "spi", "mosi", V(0, 0, 0, 0, 1, 0)), + MPP_VAR_FUNCTION(0xd, "twsi1", "sda", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(13, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "sdio", "cmd", V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "uart1", "txd", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0xa, "audio", "rmclk", V(0, 0, 0, 0, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "pwm", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(14, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "sdio", "d0", V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "uart1", "rxd", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x4, "sata1", "prsnt", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xa, "audio", "spdifi", V(0, 0, 0, 0, 1, 0)), + MPP_VAR_FUNCTION(0xb, "audio-1", "sdi", V(0, 0, 0, 0, 1, 0)), + MPP_VAR_FUNCTION(0xd, "mii", "col", V(1, 1, 1, 1, 1, 0))), + MPP_MODE(15, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "sdio", "d1", V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "uart0", "rts", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "uart1", "txd", V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "sata0", "act", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "spi", "cs", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(16, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "sdio", "d2", V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "uart0", "cts", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "uart1", "rxd", V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "sata1", "act", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "extclk", V(0, 0, 0, 0, 1, 0)), + MPP_VAR_FUNCTION(0xd, "mii", "crs", V(1, 1, 1, 1, 1, 0))), + MPP_MODE(17, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x1, "sdio", "d3", V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "sata0", "prsnt", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xa, "sata1", "act", V(0, 0, 0, 0, 1, 0)), + MPP_VAR_FUNCTION(0xd, "twsi1", "sck", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(18, + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "nand", "io0", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "pex", "clkreq", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(19, + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "nand", "io1", V(1, 1, 1, 1, 1, 1))), + MPP_MODE(20, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x1, "ts", "mp0", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "tx0ql", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "ge1", "txd0", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "spdifi", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x5, "sata1", "act", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d0", V(0, 0, 0, 0, 1, 0)), + MPP_VAR_FUNCTION(0xc, "mii", "rxerr", V(1, 0, 0, 0, 0, 0))), + MPP_MODE(21, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x1, "ts", "mp1", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "rx0ql", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "ge1", "txd1", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "spdifi", V(1, 0, 0, 0, 0, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "spdifo", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x5, "sata0", "act", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d1", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(22, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x1, "ts", "mp2", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "tx2ql", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "ge1", "txd2", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "spdifo", V(1, 0, 0, 0, 0, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "rmclk", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x5, "sata1", "prsnt", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d2", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(23, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x1, "ts", "mp3", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "rx2ql", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "ge1", "txd3", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "rmclk", V(1, 0, 0, 0, 0, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "bclk", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x5, "sata0", "prsnt", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d3", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(24, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x1, "ts", "mp4", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs0", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "ge1", "rxd0", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "bclk", V(1, 0, 0, 0, 0, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "sdo", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d4", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(25, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x1, "ts", "mp5", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "spi-sck", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "ge1", "rxd1", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "sdo", V(1, 0, 0, 0, 0, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "lrclk", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d5", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(26, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x1, "ts", "mp6", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "spi-miso", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "ge1", "rxd2", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "lrclk", V(1, 0, 0, 0, 0, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "mclk", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d6", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(27, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x1, "ts", "mp7", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "spi-mosi", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "ge1", "rxd3", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "mclk", V(1, 0, 0, 0, 0, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "sdi", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d7", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(28, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x1, "ts", "mp8", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "int", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "ge1", "col", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "sdi", V(1, 0, 0, 0, 0, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "extclk", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d8", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(29, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x1, "ts", "mp9", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "rst", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "ge1", "txclk", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "extclk", V(1, 0, 0, 0, 0, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d9", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(30, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x1, "ts", "mp10", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "pclk", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "ge1", "rxctl", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d10", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(31, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x1, "ts", "mp11", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "fs", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "ge1", "rxclk", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d11", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(32, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x1, "ts", "mp12", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "drx", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "ge1", "txclko", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d12", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(33, + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "dtx", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "ge1", "txctl", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d13", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(34, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs1", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "ge1", "txen", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x5, "sata1", "act", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d14", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(35, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "tdm", "tx0ql", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "ge1", "rxerr", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x5, "sata0", "act", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d15", V(0, 0, 0, 0, 1, 0)), + MPP_VAR_FUNCTION(0xc, "mii", "rxerr", V(0, 1, 1, 1, 1, 0))), + MPP_MODE(36, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp0", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs1", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "spdifi", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "twsi1", "sda", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(37, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp1", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "tx2ql", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "spdifo", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "twsi1", "sck", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(38, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp2", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "rx2ql", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "rmclk", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d18", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(39, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp3", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs0", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "bclk", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d19", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(40, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp4", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "spi-sck", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "sdo", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d20", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(41, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp5", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "spi-miso", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "lrclk", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d21", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(42, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp6", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "spi-mosi", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "mclk", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d22", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(43, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp7", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "int", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "sdi", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d23", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(44, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp8", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "rst", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "extclk", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "clk", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(45, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp9", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "pclk", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "e", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(46, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x1, "ts", "mp10", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "fs", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "hsync", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(47, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x1, "ts", "mp11", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "drx", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "vsync", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(48, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x1, "ts", "mp12", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "dtx", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d16", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(49, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 0, 1)), + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(0, 0, 0, 0, 1, 0)), + MPP_VAR_FUNCTION(0x1, "ts", "mp9", V(0, 0, 0, 1, 0, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "rx0ql", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x5, "ptp", "clk", V(0, 0, 0, 1, 0, 0)), + MPP_VAR_FUNCTION(0xa, "pex", "clkreq", V(0, 0, 0, 0, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d17", V(0, 0, 0, 0, 1, 0))), +}; + +static struct mvebu_mpp_ctrl mv88f6180_mpp_controls[] = { + MPP_REG_CTRL(0, 29), +}; + +static struct pinctrl_gpio_range mv88f6180_gpio_ranges[] = { + MPP_GPIO_RANGE(0, 0, 0, 30), +}; + +static struct mvebu_mpp_ctrl mv88f619x_mpp_controls[] = { + MPP_REG_CTRL(0, 35), +}; + +static struct pinctrl_gpio_range mv88f619x_gpio_ranges[] = { + MPP_GPIO_RANGE(0, 0, 0, 32), + MPP_GPIO_RANGE(1, 32, 32, 4), +}; + +static struct mvebu_mpp_ctrl mv88f628x_mpp_controls[] = { + MPP_REG_CTRL(0, 49), +}; + +static struct pinctrl_gpio_range mv88f628x_gpio_ranges[] = { + MPP_GPIO_RANGE(0, 0, 0, 32), + MPP_GPIO_RANGE(1, 32, 32, 18), +}; + +static struct mvebu_pinctrl_soc_info mv88f6180_info = { + .variant = VARIANT_MV88F6180, + .controls = mv88f6180_mpp_controls, + .ncontrols = ARRAY_SIZE(mv88f6180_mpp_controls), + .modes = mv88f6xxx_mpp_modes, + .nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes), + .gpioranges = mv88f6180_gpio_ranges, + .ngpioranges = ARRAY_SIZE(mv88f6180_gpio_ranges), +}; + +static struct mvebu_pinctrl_soc_info mv88f6190_info = { + .variant = VARIANT_MV88F6190, + .controls = mv88f619x_mpp_controls, + .ncontrols = ARRAY_SIZE(mv88f619x_mpp_controls), + .modes = mv88f6xxx_mpp_modes, + .nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes), + .gpioranges = mv88f619x_gpio_ranges, + .ngpioranges = ARRAY_SIZE(mv88f619x_gpio_ranges), +}; + +static struct mvebu_pinctrl_soc_info mv88f6192_info = { + .variant = VARIANT_MV88F6192, + .controls = mv88f619x_mpp_controls, + .ncontrols = ARRAY_SIZE(mv88f619x_mpp_controls), + .modes = mv88f6xxx_mpp_modes, + .nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes), + .gpioranges = mv88f619x_gpio_ranges, + .ngpioranges = ARRAY_SIZE(mv88f619x_gpio_ranges), +}; + +static struct mvebu_pinctrl_soc_info mv88f6281_info = { + .variant = VARIANT_MV88F6281, + .controls = mv88f628x_mpp_controls, + .ncontrols = ARRAY_SIZE(mv88f628x_mpp_controls), + .modes = mv88f6xxx_mpp_modes, + .nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes), + .gpioranges = mv88f628x_gpio_ranges, + .ngpioranges = ARRAY_SIZE(mv88f628x_gpio_ranges), +}; + +static struct mvebu_pinctrl_soc_info mv88f6282_info = { + .variant = VARIANT_MV88F6282, + .controls = mv88f628x_mpp_controls, + .ncontrols = ARRAY_SIZE(mv88f628x_mpp_controls), + .modes = mv88f6xxx_mpp_modes, + .nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes), + .gpioranges = mv88f628x_gpio_ranges, + .ngpioranges = ARRAY_SIZE(mv88f628x_gpio_ranges), +}; + +static struct mvebu_pinctrl_soc_info mv98dx4122_info = { + .variant = VARIANT_MV98DX4122, + .controls = mv88f628x_mpp_controls, + .ncontrols = ARRAY_SIZE(mv88f628x_mpp_controls), + .modes = mv88f6xxx_mpp_modes, + .nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes), + .gpioranges = mv88f628x_gpio_ranges, + .ngpioranges = ARRAY_SIZE(mv88f628x_gpio_ranges), +}; + +static struct of_device_id kirkwood_pinctrl_of_match[] __devinitdata = { + { .compatible = "marvell,88f6180-pinctrl", .data = &mv88f6180_info }, + { .compatible = "marvell,88f6190-pinctrl", .data = &mv88f6190_info }, + { .compatible = "marvell,88f6192-pinctrl", .data = &mv88f6192_info }, + { .compatible = "marvell,88f6281-pinctrl", .data = &mv88f6281_info }, + { .compatible = "marvell,88f6282-pinctrl", .data = &mv88f6282_info }, + { .compatible = "marvell,98dx4122-pinctrl", .data = &mv98dx4122_info }, + { } +}; + +static int __devinit kirkwood_pinctrl_probe(struct platform_device *pdev) +{ + const struct of_device_id *match = + of_match_device(kirkwood_pinctrl_of_match, &pdev->dev); + pdev->dev.platform_data = match->data; + return mvebu_pinctrl_probe(pdev); +} + +static int __devexit kirkwood_pinctrl_remove(struct platform_device *pdev) +{ + return mvebu_pinctrl_remove(pdev); +} + +static struct platform_driver kirkwood_pinctrl_driver = { + .driver = { + .name = "kirkwood-pinctrl", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(kirkwood_pinctrl_of_match), + }, + .probe = kirkwood_pinctrl_probe, + .remove = __devexit_p(kirkwood_pinctrl_remove), +}; + +module_platform_driver(kirkwood_pinctrl_driver); + +MODULE_AUTHOR("Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>"); +MODULE_DESCRIPTION("Marvell Kirkwood pinctrl driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pinctrl/pinctrl-mvebu.c b/drivers/pinctrl/mvebu/pinctrl-mvebu.c index 8e6266c6249..6c44b7e8964 100644 --- a/drivers/pinctrl/pinctrl-mvebu.c +++ b/drivers/pinctrl/mvebu/pinctrl-mvebu.c @@ -24,7 +24,6 @@ #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> -#include "core.h" #include "pinctrl-mvebu.h" #define MPPS_PER_REG 8 diff --git a/drivers/pinctrl/pinctrl-mvebu.h b/drivers/pinctrl/mvebu/pinctrl-mvebu.h index 90bd3beee86..90bd3beee86 100644 --- a/drivers/pinctrl/pinctrl-mvebu.h +++ b/drivers/pinctrl/mvebu/pinctrl-mvebu.h diff --git a/drivers/pinctrl/pinctrl-kirkwood.c b/drivers/pinctrl/pinctrl-kirkwood.c deleted file mode 100644 index 9a74ef674a0..00000000000 --- a/drivers/pinctrl/pinctrl-kirkwood.c +++ /dev/null @@ -1,472 +0,0 @@ -/* - * Marvell Kirkwood pinctrl driver based on mvebu pinctrl core - * - * Author: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/err.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/clk.h> -#include <linux/of.h> -#include <linux/of_device.h> -#include <linux/pinctrl/pinctrl.h> - -#include "pinctrl-mvebu.h" - -#define V(f6180, f6190, f6192, f6281, f6282) \ - ((f6180 << 0) | (f6190 << 1) | (f6192 << 2) | \ - (f6281 << 3) | (f6282 << 4)) - -enum kirkwood_variant { - VARIANT_MV88F6180 = V(1, 0, 0, 0, 0), - VARIANT_MV88F6190 = V(0, 1, 0, 0, 0), - VARIANT_MV88F6192 = V(0, 0, 1, 0, 0), - VARIANT_MV88F6281 = V(0, 0, 0, 1, 0), - VARIANT_MV88F6282 = V(0, 0, 0, 0, 1), -}; - -static struct mvebu_mpp_mode mv88f6xxx_mpp_modes[] = { - MPP_MODE(0, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "nand", "io2", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "spi", "cs", V(1, 1, 1, 1, 1))), - MPP_MODE(1, - MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "nand", "io3", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "spi", "mosi", V(1, 1, 1, 1, 1))), - MPP_MODE(2, - MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "nand", "io4", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "spi", "sck", V(1, 1, 1, 1, 1))), - MPP_MODE(3, - MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "nand", "io5", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "spi", "miso", V(1, 1, 1, 1, 1))), - MPP_MODE(4, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "nand", "io6", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "uart0", "rxd", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x5, "sata1", "act", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "hsync", V(0, 0, 0, 0, 1)), - MPP_VAR_FUNCTION(0xd, "ptp", "clk", V(1, 1, 1, 1, 0))), - MPP_MODE(5, - MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "nand", "io7", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "uart0", "txd", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x4, "ptp", "trig", V(1, 1, 1, 1, 0)), - MPP_VAR_FUNCTION(0x5, "sata0", "act", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "vsync", V(0, 0, 0, 0, 1))), - MPP_MODE(6, - MPP_VAR_FUNCTION(0x0, "sysrst", "out", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "spi", "mosi", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "ptp", "trig", V(1, 1, 1, 1, 0))), - MPP_MODE(7, - MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "pex", "rsto", V(1, 1, 1, 1, 0)), - MPP_VAR_FUNCTION(0x2, "spi", "cs", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "ptp", "trig", V(1, 1, 1, 1, 0)), - MPP_VAR_FUNCTION(0xb, "lcd", "pwm", V(0, 0, 0, 0, 1))), - MPP_MODE(8, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "twsi0", "sda", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "uart0", "rts", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "uart1", "rts", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x4, "mii-1", "rxerr", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x5, "sata1", "prsnt", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0xc, "ptp", "clk", V(1, 1, 1, 1, 0)), - MPP_VAR_FUNCTION(0xd, "mii", "col", V(1, 1, 1, 1, 1))), - MPP_MODE(9, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "twsi0", "sck", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "uart0", "cts", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "uart1", "cts", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x5, "sata0", "prsnt", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0xc, "ptp", "evreq", V(1, 1, 1, 1, 0)), - MPP_VAR_FUNCTION(0xd, "mii", "crs", V(1, 1, 1, 1, 1))), - MPP_MODE(10, - MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "spi", "sck", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0X3, "uart0", "txd", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x5, "sata1", "act", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0xc, "ptp", "trig", V(1, 1, 1, 1, 0))), - MPP_MODE(11, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "spi", "miso", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "uart0", "rxd", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x4, "ptp-1", "evreq", V(1, 1, 1, 1, 0)), - MPP_VAR_FUNCTION(0xc, "ptp-2", "trig", V(1, 1, 1, 1, 0)), - MPP_VAR_FUNCTION(0xd, "ptp", "clk", V(1, 1, 1, 1, 0)), - MPP_VAR_FUNCTION(0x5, "sata0", "act", V(0, 1, 1, 1, 1))), - MPP_MODE(12, - MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 0, 1)), - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 0)), - MPP_VAR_FUNCTION(0x1, "sdio", "clk", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0xa, "audio", "spdifo", V(0, 0, 0, 0, 1)), - MPP_VAR_FUNCTION(0xb, "spi", "mosi", V(0, 0, 0, 0, 1)), - MPP_VAR_FUNCTION(0xd, "twsi1", "sda", V(0, 0, 0, 0, 1))), - MPP_MODE(13, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "sdio", "cmd", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "uart1", "txd", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0xa, "audio", "rmclk", V(0, 0, 0, 0, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "pwm", V(0, 0, 0, 0, 1))), - MPP_MODE(14, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "sdio", "d0", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "uart1", "rxd", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x4, "sata1", "prsnt", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0xa, "audio", "spdifi", V(0, 0, 0, 0, 1)), - MPP_VAR_FUNCTION(0xb, "audio-1", "sdi", V(0, 0, 0, 0, 1)), - MPP_VAR_FUNCTION(0xd, "mii", "col", V(1, 1, 1, 1, 1))), - MPP_MODE(15, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "sdio", "d1", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "uart0", "rts", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "uart1", "txd", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x4, "sata0", "act", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "spi", "cs", V(0, 0, 0, 0, 1))), - MPP_MODE(16, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "sdio", "d2", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "uart0", "cts", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "uart1", "rxd", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x4, "sata1", "act", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "extclk", V(0, 0, 0, 0, 1)), - MPP_VAR_FUNCTION(0xd, "mii", "crs", V(1, 1, 1, 1, 1))), - MPP_MODE(17, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "sdio", "d3", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x4, "sata0", "prsnt", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0xa, "sata1", "act", V(0, 0, 0, 0, 1)), - MPP_VAR_FUNCTION(0xd, "twsi1", "sck", V(0, 0, 0, 0, 1))), - MPP_MODE(18, - MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "nand", "io0", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "pex", "clkreq", V(0, 0, 0, 0, 1))), - MPP_MODE(19, - MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "nand", "io1", V(1, 1, 1, 1, 1))), - MPP_MODE(20, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp0", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "tx0ql", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "ge1", "txd0", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "spdifi", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x5, "sata1", "act", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d0", V(0, 0, 0, 0, 1)), - MPP_VAR_FUNCTION(0xc, "mii", "rxerr", V(1, 0, 0, 0, 0))), - MPP_MODE(21, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp1", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "rx0ql", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "ge1", "txd1", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "spdifi", V(1, 0, 0, 0, 0)), - MPP_VAR_FUNCTION(0x4, "audio", "spdifo", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x5, "sata0", "act", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d1", V(0, 0, 0, 0, 1))), - MPP_MODE(22, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp2", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "tx2ql", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "ge1", "txd2", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "spdifo", V(1, 0, 0, 0, 0)), - MPP_VAR_FUNCTION(0x4, "audio", "rmclk", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x5, "sata1", "prsnt", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d2", V(0, 0, 0, 0, 1))), - MPP_MODE(23, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp3", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "rx2ql", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "ge1", "txd3", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "rmclk", V(1, 0, 0, 0, 0)), - MPP_VAR_FUNCTION(0x4, "audio", "bclk", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x5, "sata0", "prsnt", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d3", V(0, 0, 0, 0, 1))), - MPP_MODE(24, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp4", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs0", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "ge1", "rxd0", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "bclk", V(1, 0, 0, 0, 0)), - MPP_VAR_FUNCTION(0x4, "audio", "sdo", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d4", V(0, 0, 0, 0, 1))), - MPP_MODE(25, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp5", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "spi-sck", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "ge1", "rxd1", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "sdo", V(1, 0, 0, 0, 0)), - MPP_VAR_FUNCTION(0x4, "audio", "lrclk", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d5", V(0, 0, 0, 0, 1))), - MPP_MODE(26, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp6", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "spi-miso", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "ge1", "rxd2", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "lrclk", V(1, 0, 0, 0, 0)), - MPP_VAR_FUNCTION(0x4, "audio", "mclk", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d6", V(0, 0, 0, 0, 1))), - MPP_MODE(27, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp7", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "spi-mosi", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "ge1", "rxd3", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "mclk", V(1, 0, 0, 0, 0)), - MPP_VAR_FUNCTION(0x4, "audio", "sdi", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d7", V(0, 0, 0, 0, 1))), - MPP_MODE(28, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp8", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "int", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "ge1", "col", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "sdi", V(1, 0, 0, 0, 0)), - MPP_VAR_FUNCTION(0x4, "audio", "extclk", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d8", V(0, 0, 0, 0, 1))), - MPP_MODE(29, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp9", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "rst", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "ge1", "txclk", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "extclk", V(1, 0, 0, 0, 0)), - MPP_VAR_FUNCTION(0xb, "lcd", "d9", V(0, 0, 0, 0, 1))), - MPP_MODE(30, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp10", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "pclk", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "ge1", "rxctl", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d10", V(0, 0, 0, 0, 1))), - MPP_MODE(31, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp11", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "fs", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "ge1", "rxclk", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d11", V(0, 0, 0, 0, 1))), - MPP_MODE(32, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp12", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "drx", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "ge1", "txclko", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d12", V(0, 0, 0, 0, 1))), - MPP_MODE(33, - MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "dtx", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "ge1", "txctl", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d13", V(0, 0, 0, 0, 1))), - MPP_MODE(34, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs1", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "ge1", "txen", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x5, "sata1", "act", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d14", V(0, 0, 0, 0, 1))), - MPP_MODE(35, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "tx0ql", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "ge1", "rxerr", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x5, "sata0", "act", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d15", V(0, 0, 0, 0, 1)), - MPP_VAR_FUNCTION(0xc, "mii", "rxerr", V(0, 1, 1, 1, 1))), - MPP_MODE(36, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp0", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs1", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "spdifi", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0xb, "twsi1", "sda", V(0, 0, 0, 0, 1))), - MPP_MODE(37, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp1", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "tx2ql", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "spdifo", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0xb, "twsi1", "sck", V(0, 0, 0, 0, 1))), - MPP_MODE(38, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp2", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "rx2ql", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "rmclk", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d18", V(0, 0, 0, 0, 1))), - MPP_MODE(39, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp3", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs0", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "bclk", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d19", V(0, 0, 0, 0, 1))), - MPP_MODE(40, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp4", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "spi-sck", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "sdo", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d20", V(0, 0, 0, 0, 1))), - MPP_MODE(41, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp5", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "spi-miso", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "lrclk", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d21", V(0, 0, 0, 0, 1))), - MPP_MODE(42, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp6", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "spi-mosi", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "mclk", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d22", V(0, 0, 0, 0, 1))), - MPP_MODE(43, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp7", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "int", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "sdi", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d23", V(0, 0, 0, 0, 1))), - MPP_MODE(44, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp8", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "rst", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "extclk", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "clk", V(0, 0, 0, 0, 1))), - MPP_MODE(45, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp9", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "pclk", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "e", V(0, 0, 0, 0, 1))), - MPP_MODE(46, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp10", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "fs", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "hsync", V(0, 0, 0, 0, 1))), - MPP_MODE(47, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp11", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "drx", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "vsync", V(0, 0, 0, 0, 1))), - MPP_MODE(48, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp12", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "dtx", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d16", V(0, 0, 0, 0, 1))), - MPP_MODE(49, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 0)), - MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(0, 0, 0, 0, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp9", V(0, 0, 0, 1, 0)), - MPP_VAR_FUNCTION(0x2, "tdm", "rx0ql", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x5, "ptp", "clk", V(0, 0, 0, 1, 0)), - MPP_VAR_FUNCTION(0xa, "pex", "clkreq", V(0, 0, 0, 0, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d17", V(0, 0, 0, 0, 1))), -}; - -static struct mvebu_mpp_ctrl mv88f6180_mpp_controls[] = { - MPP_REG_CTRL(0, 29), -}; - -static struct pinctrl_gpio_range mv88f6180_gpio_ranges[] = { - MPP_GPIO_RANGE(0, 0, 0, 30), -}; - -static struct mvebu_mpp_ctrl mv88f619x_mpp_controls[] = { - MPP_REG_CTRL(0, 35), -}; - -static struct pinctrl_gpio_range mv88f619x_gpio_ranges[] = { - MPP_GPIO_RANGE(0, 0, 0, 32), - MPP_GPIO_RANGE(1, 32, 32, 4), -}; - -static struct mvebu_mpp_ctrl mv88f628x_mpp_controls[] = { - MPP_REG_CTRL(0, 49), -}; - -static struct pinctrl_gpio_range mv88f628x_gpio_ranges[] = { - MPP_GPIO_RANGE(0, 0, 0, 32), - MPP_GPIO_RANGE(1, 32, 32, 18), -}; - -static struct mvebu_pinctrl_soc_info mv88f6180_info = { - .variant = VARIANT_MV88F6180, - .controls = mv88f6180_mpp_controls, - .ncontrols = ARRAY_SIZE(mv88f6180_mpp_controls), - .modes = mv88f6xxx_mpp_modes, - .nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes), - .gpioranges = mv88f6180_gpio_ranges, - .ngpioranges = ARRAY_SIZE(mv88f6180_gpio_ranges), -}; - -static struct mvebu_pinctrl_soc_info mv88f6190_info = { - .variant = VARIANT_MV88F6190, - .controls = mv88f619x_mpp_controls, - .ncontrols = ARRAY_SIZE(mv88f619x_mpp_controls), - .modes = mv88f6xxx_mpp_modes, - .nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes), - .gpioranges = mv88f619x_gpio_ranges, - .ngpioranges = ARRAY_SIZE(mv88f619x_gpio_ranges), -}; - -static struct mvebu_pinctrl_soc_info mv88f6192_info = { - .variant = VARIANT_MV88F6192, - .controls = mv88f619x_mpp_controls, - .ncontrols = ARRAY_SIZE(mv88f619x_mpp_controls), - .modes = mv88f6xxx_mpp_modes, - .nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes), - .gpioranges = mv88f619x_gpio_ranges, - .ngpioranges = ARRAY_SIZE(mv88f619x_gpio_ranges), -}; - -static struct mvebu_pinctrl_soc_info mv88f6281_info = { - .variant = VARIANT_MV88F6281, - .controls = mv88f628x_mpp_controls, - .ncontrols = ARRAY_SIZE(mv88f628x_mpp_controls), - .modes = mv88f6xxx_mpp_modes, - .nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes), - .gpioranges = mv88f628x_gpio_ranges, - .ngpioranges = ARRAY_SIZE(mv88f628x_gpio_ranges), -}; - -static struct mvebu_pinctrl_soc_info mv88f6282_info = { - .variant = VARIANT_MV88F6282, - .controls = mv88f628x_mpp_controls, - .ncontrols = ARRAY_SIZE(mv88f628x_mpp_controls), - .modes = mv88f6xxx_mpp_modes, - .nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes), - .gpioranges = mv88f628x_gpio_ranges, - .ngpioranges = ARRAY_SIZE(mv88f628x_gpio_ranges), -}; - -static struct of_device_id kirkwood_pinctrl_of_match[] __devinitdata = { - { .compatible = "marvell,88f6180-pinctrl", .data = &mv88f6180_info }, - { .compatible = "marvell,88f6190-pinctrl", .data = &mv88f6190_info }, - { .compatible = "marvell,88f6192-pinctrl", .data = &mv88f6192_info }, - { .compatible = "marvell,88f6281-pinctrl", .data = &mv88f6281_info }, - { .compatible = "marvell,88f6282-pinctrl", .data = &mv88f6282_info }, - { } -}; - -static int __devinit kirkwood_pinctrl_probe(struct platform_device *pdev) -{ - const struct of_device_id *match = - of_match_device(kirkwood_pinctrl_of_match, &pdev->dev); - pdev->dev.platform_data = match->data; - return mvebu_pinctrl_probe(pdev); -} - -static int __devexit kirkwood_pinctrl_remove(struct platform_device *pdev) -{ - return mvebu_pinctrl_remove(pdev); -} - -static struct platform_driver kirkwood_pinctrl_driver = { - .driver = { - .name = "kirkwood-pinctrl", - .owner = THIS_MODULE, - .of_match_table = of_match_ptr(kirkwood_pinctrl_of_match), - }, - .probe = kirkwood_pinctrl_probe, - .remove = __devexit_p(kirkwood_pinctrl_remove), -}; - -module_platform_driver(kirkwood_pinctrl_driver); - -MODULE_AUTHOR("Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>"); -MODULE_DESCRIPTION("Marvell Kirkwood pinctrl driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/pinctrl/pinmux.c b/drivers/pinctrl/pinmux.c index 9301a7a95ef..0ef01ee2835 100644 --- a/drivers/pinctrl/pinmux.c +++ b/drivers/pinctrl/pinmux.c @@ -314,14 +314,11 @@ int pinmux_map_to_setting(struct pinctrl_map const *map, { struct pinctrl_dev *pctldev = setting->pctldev; const struct pinmux_ops *pmxops = pctldev->desc->pmxops; - const struct pinctrl_ops *pctlops = pctldev->desc->pctlops; char const * const *groups; unsigned num_groups; int ret; const char *group; int i; - const unsigned *pins; - unsigned num_pins; if (!pmxops) { dev_err(pctldev->dev, "does not support mux function\n"); @@ -376,53 +373,12 @@ int pinmux_map_to_setting(struct pinctrl_map const *map, } setting->data.mux.group = ret; - ret = pctlops->get_group_pins(pctldev, setting->data.mux.group, &pins, - &num_pins); - if (ret) { - dev_err(pctldev->dev, - "could not get pins for device %s group selector %d\n", - pinctrl_dev_get_name(pctldev), setting->data.mux.group); - return -ENODEV; - } - - /* Try to allocate all pins in this group, one by one */ - for (i = 0; i < num_pins; i++) { - ret = pin_request(pctldev, pins[i], map->dev_name, NULL); - if (ret) { - dev_err(pctldev->dev, - "could not request pin %d on device %s\n", - pins[i], pinctrl_dev_get_name(pctldev)); - /* On error release all taken pins */ - i--; /* this pin just failed */ - for (; i >= 0; i--) - pin_free(pctldev, pins[i], NULL); - return -ENODEV; - } - } - return 0; } void pinmux_free_setting(struct pinctrl_setting const *setting) { - struct pinctrl_dev *pctldev = setting->pctldev; - const struct pinctrl_ops *pctlops = pctldev->desc->pctlops; - const unsigned *pins; - unsigned num_pins; - int ret; - int i; - - ret = pctlops->get_group_pins(pctldev, setting->data.mux.group, - &pins, &num_pins); - if (ret) { - dev_err(pctldev->dev, - "could not get pins for device %s group selector %d\n", - pinctrl_dev_get_name(pctldev), setting->data.mux.group); - return; - } - - for (i = 0; i < num_pins; i++) - pin_free(pctldev, pins[i], NULL); + /* This function is currently unused */ } int pinmux_enable_setting(struct pinctrl_setting const *setting) @@ -446,6 +402,22 @@ int pinmux_enable_setting(struct pinctrl_setting const *setting) num_pins = 0; } + /* Try to allocate all pins in this group, one by one */ + for (i = 0; i < num_pins; i++) { + ret = pin_request(pctldev, pins[i], setting->dev_name, NULL); + if (ret) { + dev_err(pctldev->dev, + "could not request pin %d on device %s\n", + pins[i], pinctrl_dev_get_name(pctldev)); + /* On error release all taken pins */ + i--; /* this pin just failed */ + for (; i >= 0; i--) + pin_free(pctldev, pins[i], NULL); + return -ENODEV; + } + } + + /* Now that we have acquired the pins, encode the mux setting */ for (i = 0; i < num_pins; i++) { desc = pin_desc_get(pctldev, pins[i]); if (desc == NULL) { @@ -482,6 +454,7 @@ void pinmux_disable_setting(struct pinctrl_setting const *setting) num_pins = 0; } + /* Flag the descs that no setting is active */ for (i = 0; i < num_pins; i++) { desc = pin_desc_get(pctldev, pins[i]); if (desc == NULL) { @@ -493,6 +466,10 @@ void pinmux_disable_setting(struct pinctrl_setting const *setting) desc->mux_setting = NULL; } + /* And release the pins */ + for (i = 0; i < num_pins; i++) + pin_free(pctldev, pins[i], NULL); + if (ops->disable) ops->disable(pctldev, setting->data.mux.func, setting->data.mux.group); } diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 49a89397231..b1d956d81f0 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -335,6 +335,9 @@ config AB8500_BATTERY_THERM_ON_BATCTRL help Say Y to enable battery temperature measurements using thermistor connected on BATCTRL ADC. + +source "drivers/power/reset/Kconfig" + endif # POWER_SUPPLY source "drivers/power/avs/Kconfig" diff --git a/drivers/power/Makefile b/drivers/power/Makefile index b949cf85590..f1d99f4a0bc 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -49,3 +49,4 @@ obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o obj-$(CONFIG_POWER_AVS) += avs/ obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o +obj-$(CONFIG_POWER_RESET) += reset/ diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig new file mode 100644 index 00000000000..6461b489fb0 --- /dev/null +++ b/drivers/power/reset/Kconfig @@ -0,0 +1,15 @@ +menuconfig POWER_RESET + bool "Board level reset or power off" + help + Provides a number of drivers which either reset a complete board + or shut it down, by manipulating the main power supply on the board. + + Say Y here to enable board reset and power off + +config POWER_RESET_GPIO + bool "GPIO power-off driver" + depends on OF_GPIO && POWER_RESET + help + This driver supports turning off your board via a GPIO line. + If your board needs a GPIO high/low to power down, say Y and + create a binding in your devicetree. diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile new file mode 100644 index 00000000000..751488a4a0c --- /dev/null +++ b/drivers/power/reset/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o diff --git a/drivers/power/reset/gpio-poweroff.c b/drivers/power/reset/gpio-poweroff.c new file mode 100644 index 00000000000..0491e5335d0 --- /dev/null +++ b/drivers/power/reset/gpio-poweroff.c @@ -0,0 +1,129 @@ +/* + * Toggles a GPIO pin to power down a device + * + * Jamie Lentin <jm@lentin.co.uk> + * Andrew Lunn <andrew@lunn.ch> + * + * Copyright (C) 2012 Jamie Lentin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/of_platform.h> +#include <linux/of_gpio.h> +#include <linux/module.h> + +/* + * Hold configuration here, cannot be more than one instance of the driver + * since pm_power_off itself is global. + */ +static int gpio_num = -1; +static int gpio_active_low; + +static void gpio_poweroff_do_poweroff(void) +{ + BUG_ON(gpio_num == -1); + + /* drive it active */ + gpio_direction_output(gpio_num, !gpio_active_low); + mdelay(100); + /* rising edge or drive inactive */ + gpio_set_value(gpio_num, gpio_active_low); + mdelay(100); + /* falling edge */ + gpio_set_value(gpio_num, !gpio_active_low); + + /* give it some time */ + mdelay(3000); + + WARN_ON(1); +} + +static int __devinit gpio_poweroff_probe(struct platform_device *pdev) +{ + enum of_gpio_flags flags; + bool input = false; + int ret; + + /* If a pm_power_off function has already been added, leave it alone */ + if (pm_power_off != NULL) { + pr_err("%s: pm_power_off function already registered", + __func__); + return -EBUSY; + } + + gpio_num = of_get_gpio_flags(pdev->dev.of_node, 0, &flags); + if (gpio_num < 0) { + pr_err("%s: Could not get GPIO configuration: %d", + __func__, gpio_num); + return -ENODEV; + } + gpio_active_low = flags & OF_GPIO_ACTIVE_LOW; + + if (of_get_property(pdev->dev.of_node, "input", NULL)) + input = true; + + ret = gpio_request(gpio_num, "poweroff-gpio"); + if (ret) { + pr_err("%s: Could not get GPIO %d", __func__, gpio_num); + return ret; + } + if (input) { + if (gpio_direction_input(gpio_num)) { + pr_err("Could not set direction of GPIO %d to input", + gpio_num); + goto err; + } + } else { + if (gpio_direction_output(gpio_num, gpio_active_low)) { + pr_err("Could not set direction of GPIO %d", gpio_num); + goto err; + } + } + + pm_power_off = &gpio_poweroff_do_poweroff; + return 0; + +err: + gpio_free(gpio_num); + return -ENODEV; +} + +static int __devexit gpio_poweroff_remove(struct platform_device *pdev) +{ + if (gpio_num != -1) + gpio_free(gpio_num); + if (pm_power_off == &gpio_poweroff_do_poweroff) + pm_power_off = NULL; + + return 0; +} + +static const struct of_device_id of_gpio_poweroff_match[] = { + { .compatible = "gpio-poweroff", }, + {}, +}; + +static struct platform_driver gpio_poweroff_driver = { + .probe = gpio_poweroff_probe, + .remove = __devexit_p(gpio_poweroff_remove), + .driver = { + .name = "poweroff-gpio", + .owner = THIS_MODULE, + .of_match_table = of_gpio_poweroff_match, + }, +}; + +module_platform_driver(gpio_poweroff_driver); + +MODULE_AUTHOR("Jamie Lentin <jm@lentin.co.uk>"); +MODULE_DESCRIPTION("GPIO poweroff driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:poweroff-gpio"); diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c index c17ae22567e..0c6fcb461fa 100644 --- a/drivers/rapidio/rio.c +++ b/drivers/rapidio/rio.c @@ -401,7 +401,7 @@ EXPORT_SYMBOL_GPL(rio_release_inb_pwrite); /** * rio_map_inb_region -- Map inbound memory region. * @mport: Master port. - * @lstart: physical address of memory region to be mapped + * @local: physical address of memory region to be mapped * @rbase: RIO base address assigned to this window * @size: Size of the memory region * @rflags: Flags for mapping. diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 5c4829cba6a..e872c8be080 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1381,22 +1381,14 @@ struct regulator *regulator_get_exclusive(struct device *dev, const char *id) } EXPORT_SYMBOL_GPL(regulator_get_exclusive); -/** - * regulator_put - "free" the regulator source - * @regulator: regulator source - * - * Note: drivers must ensure that all regulator_enable calls made on this - * regulator source are balanced by regulator_disable calls prior to calling - * this function. - */ -void regulator_put(struct regulator *regulator) +/* Locks held by regulator_put() */ +static void _regulator_put(struct regulator *regulator) { struct regulator_dev *rdev; if (regulator == NULL || IS_ERR(regulator)) return; - mutex_lock(®ulator_list_mutex); rdev = regulator->rdev; debugfs_remove_recursive(regulator->debugfs); @@ -1412,6 +1404,20 @@ void regulator_put(struct regulator *regulator) rdev->exclusive = 0; module_put(rdev->owner); +} + +/** + * regulator_put - "free" the regulator source + * @regulator: regulator source + * + * Note: drivers must ensure that all regulator_enable calls made on this + * regulator source are balanced by regulator_disable calls prior to calling + * this function. + */ +void regulator_put(struct regulator *regulator) +{ + mutex_lock(®ulator_list_mutex); + _regulator_put(regulator); mutex_unlock(®ulator_list_mutex); } EXPORT_SYMBOL_GPL(regulator_put); @@ -1974,7 +1980,7 @@ int regulator_is_supported_voltage(struct regulator *regulator, if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) { ret = regulator_get_voltage(regulator); if (ret >= 0) - return (min_uV >= ret && ret <= max_uV); + return (min_uV <= ret && ret <= max_uV); else return ret; } @@ -3365,7 +3371,7 @@ regulator_register(const struct regulator_desc *regulator_desc, if (ret != 0) { rdev_err(rdev, "Failed to request enable GPIO%d: %d\n", config->ena_gpio, ret); - goto clean; + goto wash; } rdev->ena_gpio = config->ena_gpio; @@ -3445,10 +3451,11 @@ unset_supplies: scrub: if (rdev->supply) - regulator_put(rdev->supply); + _regulator_put(rdev->supply); if (rdev->ena_gpio) gpio_free(rdev->ena_gpio); kfree(rdev->constraints); +wash: device_unregister(&rdev->dev); /* device core frees rdev */ rdev = ERR_PTR(ret); diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c index 9ffb6d5f17a..4ed343e4eb4 100644 --- a/drivers/s390/char/con3215.c +++ b/drivers/s390/char/con3215.c @@ -44,7 +44,6 @@ #define RAW3215_NR_CCWS 3 #define RAW3215_TIMEOUT HZ/10 /* time for delayed output */ -#define RAW3215_FIXED 1 /* 3215 console device is not be freed */ #define RAW3215_WORKING 4 /* set if a request is being worked on */ #define RAW3215_THROTTLED 8 /* set if reading is disabled */ #define RAW3215_STOPPED 16 /* set if writing is disabled */ @@ -339,8 +338,10 @@ static void raw3215_wakeup(unsigned long data) struct tty_struct *tty; tty = tty_port_tty_get(&raw->port); - tty_wakeup(tty); - tty_kref_put(tty); + if (tty) { + tty_wakeup(tty); + tty_kref_put(tty); + } } /* @@ -629,8 +630,7 @@ static void raw3215_shutdown(struct raw3215_info *raw) DECLARE_WAITQUEUE(wait, current); unsigned long flags; - if (!(raw->port.flags & ASYNC_INITIALIZED) || - (raw->flags & RAW3215_FIXED)) + if (!(raw->port.flags & ASYNC_INITIALIZED)) return; /* Wait for outstanding requests, then free irq */ spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags); @@ -926,8 +926,6 @@ static int __init con3215_init(void) dev_set_drvdata(&cdev->dev, raw); cdev->handler = raw3215_irq; - raw->flags |= RAW3215_FIXED; - /* Request the console irq */ if (raw3215_startup(raw) != 0) { raw3215_free_info(raw); diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 3e25d315045..4d6ba00d004 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -2942,13 +2942,33 @@ static int qeth_query_ipassists_cb(struct qeth_card *card, QETH_DBF_TEXT(SETUP, 2, "qipasscb"); cmd = (struct qeth_ipa_cmd *) data; + + switch (cmd->hdr.return_code) { + case IPA_RC_NOTSUPP: + case IPA_RC_L2_UNSUPPORTED_CMD: + QETH_DBF_TEXT(SETUP, 2, "ipaunsup"); + card->options.ipa4.supported_funcs |= IPA_SETADAPTERPARMS; + card->options.ipa6.supported_funcs |= IPA_SETADAPTERPARMS; + return -0; + default: + if (cmd->hdr.return_code) { + QETH_DBF_MESSAGE(1, "%s IPA_CMD_QIPASSIST: Unhandled " + "rc=%d\n", + dev_name(&card->gdev->dev), + cmd->hdr.return_code); + return 0; + } + } + if (cmd->hdr.prot_version == QETH_PROT_IPV4) { card->options.ipa4.supported_funcs = cmd->hdr.ipa_supported; card->options.ipa4.enabled_funcs = cmd->hdr.ipa_enabled; - } else { + } else if (cmd->hdr.prot_version == QETH_PROT_IPV6) { card->options.ipa6.supported_funcs = cmd->hdr.ipa_supported; card->options.ipa6.enabled_funcs = cmd->hdr.ipa_enabled; - } + } else + QETH_DBF_MESSAGE(1, "%s IPA_CMD_QIPASSIST: Flawed LIC detected" + "\n", dev_name(&card->gdev->dev)); QETH_DBF_TEXT(SETUP, 2, "suppenbl"); QETH_DBF_TEXT_(SETUP, 2, "%08x", (__u32)cmd->hdr.ipa_supported); QETH_DBF_TEXT_(SETUP, 2, "%08x", (__u32)cmd->hdr.ipa_enabled); diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index e67e0258aec..fddb62654b6 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -626,10 +626,13 @@ static int qeth_l2_request_initial_mac(struct qeth_card *card) QETH_DBF_TEXT(SETUP, 2, "doL2init"); QETH_DBF_TEXT_(SETUP, 2, "doL2%s", CARD_BUS_ID(card)); - rc = qeth_query_setadapterparms(card); - if (rc) { - QETH_DBF_MESSAGE(2, "could not query adapter parameters on " - "device %s: x%x\n", CARD_BUS_ID(card), rc); + if (qeth_is_supported(card, IPA_SETADAPTERPARMS)) { + rc = qeth_query_setadapterparms(card); + if (rc) { + QETH_DBF_MESSAGE(2, "could not query adapter " + "parameters on device %s: x%x\n", + CARD_BUS_ID(card), rc); + } } if (card->info.type == QETH_CARD_TYPE_IQD || @@ -676,7 +679,7 @@ static int qeth_l2_set_mac_address(struct net_device *dev, void *p) return -ERESTARTSYS; } rc = qeth_l2_send_delmac(card, &card->dev->dev_addr[0]); - if (!rc) + if (!rc || (rc == IPA_RC_L2_MAC_NOT_FOUND)) rc = qeth_l2_send_setmac(card, addr->sa_data); return rc ? -EINVAL : 0; } diff --git a/drivers/staging/android/android_alarm.h b/drivers/staging/android/android_alarm.h index f2ffd963f1c..d0cafd63719 100644 --- a/drivers/staging/android/android_alarm.h +++ b/drivers/staging/android/android_alarm.h @@ -51,12 +51,10 @@ enum android_alarm_return_flags { #define ANDROID_ALARM_WAIT _IO('a', 1) #define ALARM_IOW(c, type, size) _IOW('a', (c) | ((type) << 4), size) -#define ALARM_IOR(c, type, size) _IOR('a', (c) | ((type) << 4), size) - /* Set alarm */ #define ANDROID_ALARM_SET(type) ALARM_IOW(2, type, struct timespec) #define ANDROID_ALARM_SET_AND_WAIT(type) ALARM_IOW(3, type, struct timespec) -#define ANDROID_ALARM_GET_TIME(type) ALARM_IOR(4, type, struct timespec) +#define ANDROID_ALARM_GET_TIME(type) ALARM_IOW(4, type, struct timespec) #define ANDROID_ALARM_SET_RTC _IOW('a', 5, struct timespec) #define ANDROID_ALARM_BASE_CMD(cmd) (cmd & ~(_IOC(0, 0, 0xf0, 0))) #define ANDROID_ALARM_IOCTL_TO_TYPE(cmd) (_IOC_NR(cmd) >> 4) diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c index a5dec1ca1b8..13ee53bd0bf 100644 --- a/drivers/tty/hvc/hvc_console.c +++ b/drivers/tty/hvc/hvc_console.c @@ -424,7 +424,6 @@ static void hvc_hangup(struct tty_struct *tty) { struct hvc_struct *hp = tty->driver_data; unsigned long flags; - int temp_open_count; if (!hp) return; @@ -444,7 +443,6 @@ static void hvc_hangup(struct tty_struct *tty) return; } - temp_open_count = hp->port.count; hp->port.count = 0; spin_unlock_irqrestore(&hp->port.lock, flags); tty_port_tty_set(&hp->port, NULL); @@ -453,11 +451,6 @@ static void hvc_hangup(struct tty_struct *tty) if (hp->ops->notifier_hangup) hp->ops->notifier_hangup(hp, hp->data); - - while(temp_open_count) { - --temp_open_count; - tty_port_put(&hp->port); - } } /* diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index 2bc28a59d38..1ab1d2c66de 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -1239,6 +1239,7 @@ static int __devexit max310x_remove(struct spi_device *spi) static const struct spi_device_id max310x_id_table[] = { { "max3107", MAX310X_TYPE_MAX3107 }, { "max3108", MAX310X_TYPE_MAX3108 }, + { } }; MODULE_DEVICE_TABLE(spi, max310x_id_table); diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 1e741bca026..f034716190f 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2151,8 +2151,15 @@ EXPORT_SYMBOL_GPL(usb_bus_start_enum); irqreturn_t usb_hcd_irq (int irq, void *__hcd) { struct usb_hcd *hcd = __hcd; + unsigned long flags; irqreturn_t rc; + /* IRQF_DISABLED doesn't work correctly with shared IRQs + * when the first handler doesn't use it. So let's just + * assume it's never used. + */ + local_irq_save(flags); + if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd))) rc = IRQ_NONE; else if (hcd->driver->irq(hcd) == IRQ_NONE) @@ -2160,6 +2167,7 @@ irqreturn_t usb_hcd_irq (int irq, void *__hcd) else rc = IRQ_HANDLED; + local_irq_restore(flags); return rc; } EXPORT_SYMBOL_GPL(usb_hcd_irq); @@ -2347,6 +2355,14 @@ static int usb_hcd_request_irqs(struct usb_hcd *hcd, int retval; if (hcd->driver->irq) { + + /* IRQF_DISABLED doesn't work as advertised when used together + * with IRQF_SHARED. As usb_hcd_irq() will always disable + * interrupts we can remove it here. + */ + if (irqflags & IRQF_SHARED) + irqflags &= ~IRQF_DISABLED; + snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d", hcd->driver->description, hcd->self.busnum); retval = request_irq(irqnum, &usb_hcd_irq, irqflags, diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c index e426ad626d7..4bfa78af379 100644 --- a/drivers/usb/early/ehci-dbgp.c +++ b/drivers/usb/early/ehci-dbgp.c @@ -20,6 +20,7 @@ #include <linux/usb/ehci_def.h> #include <linux/delay.h> #include <linux/serial_core.h> +#include <linux/kconfig.h> #include <linux/kgdb.h> #include <linux/kthread.h> #include <asm/io.h> @@ -614,12 +615,6 @@ err: return -ENODEV; } -int dbgp_external_startup(struct usb_hcd *hcd) -{ - return xen_dbgp_external_startup(hcd) ?: _dbgp_external_startup(); -} -EXPORT_SYMBOL_GPL(dbgp_external_startup); - static int ehci_reset_port(int port) { u32 portsc; @@ -979,6 +974,7 @@ struct console early_dbgp_console = { .index = -1, }; +#if IS_ENABLED(CONFIG_USB_EHCI_HCD) int dbgp_reset_prep(struct usb_hcd *hcd) { int ret = xen_dbgp_reset_prep(hcd); @@ -1007,6 +1003,13 @@ int dbgp_reset_prep(struct usb_hcd *hcd) } EXPORT_SYMBOL_GPL(dbgp_reset_prep); +int dbgp_external_startup(struct usb_hcd *hcd) +{ + return xen_dbgp_external_startup(hcd) ?: _dbgp_external_startup(); +} +EXPORT_SYMBOL_GPL(dbgp_external_startup); +#endif /* USB_EHCI_HCD */ + #ifdef CONFIG_KGDB static char kgdbdbgp_buf[DBGP_MAX_PACKET]; diff --git a/drivers/usb/host/ehci-ls1x.c b/drivers/usb/host/ehci-ls1x.c index ca759652626..aa0f328922d 100644 --- a/drivers/usb/host/ehci-ls1x.c +++ b/drivers/usb/host/ehci-ls1x.c @@ -113,7 +113,7 @@ static int ehci_hcd_ls1x_probe(struct platform_device *pdev) goto err_put_hcd; } - ret = usb_add_hcd(hcd, irq, IRQF_SHARED); + ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); if (ret) goto err_put_hcd; diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 9c2717d6673..e7e8275028d 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -14,6 +14,9 @@ #include <linux/mbus.h> #include <linux/clk.h> #include <linux/platform_data/usb-ehci-orion.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_irq.h> #define rdl(off) __raw_readl(hcd->regs + (off)) #define wrl(off, val) __raw_writel((val), hcd->regs + (off)) @@ -181,6 +184,8 @@ ehci_orion_conf_mbus_windows(struct usb_hcd *hcd, } } +static u64 ehci_orion_dma_mask = DMA_BIT_MASK(32); + static int __devinit ehci_orion_drv_probe(struct platform_device *pdev) { struct orion_ehci_data *pd = pdev->dev.platform_data; @@ -191,13 +196,17 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev) struct clk *clk; void __iomem *regs; int irq, err; + enum orion_ehci_phy_ver phy_version; if (usb_disabled()) return -ENODEV; pr_debug("Initializing Orion-SoC USB Host Controller\n"); - irq = platform_get_irq(pdev, 0); + if (pdev->dev.of_node) + irq = irq_of_parse_and_map(pdev->dev.of_node, 0); + else + irq = platform_get_irq(pdev, 0); if (irq <= 0) { dev_err(&pdev->dev, "Found HC with no IRQ. Check %s setup!\n", @@ -215,6 +224,14 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev) goto err1; } + /* + * Right now device-tree probed devices don't get dma_mask + * set. Since shared usb code relies on it, set it here for + * now. Once we have dma capability bindings this can go away. + */ + if (!pdev->dev.dma_mask) + pdev->dev.dma_mask = &ehci_orion_dma_mask; + if (!request_mem_region(res->start, resource_size(res), ehci_orion_hc_driver.description)) { dev_dbg(&pdev->dev, "controller already in use\n"); @@ -262,7 +279,12 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev) /* * setup Orion USB controller. */ - switch (pd->phy_version) { + if (pdev->dev.of_node) + phy_version = EHCI_PHY_NA; + else + phy_version = pd->phy_version; + + switch (phy_version) { case EHCI_PHY_NA: /* dont change USB phy settings */ break; case EHCI_PHY_ORION: @@ -317,9 +339,19 @@ static int __exit ehci_orion_drv_remove(struct platform_device *pdev) MODULE_ALIAS("platform:orion-ehci"); +static const struct of_device_id ehci_orion_dt_ids[] __devinitdata = { + { .compatible = "marvell,orion-ehci", }, + {}, +}; +MODULE_DEVICE_TABLE(of, ehci_orion_dt_ids); + static struct platform_driver ehci_orion_driver = { .probe = ehci_orion_drv_probe, .remove = __exit_p(ehci_orion_drv_remove), .shutdown = usb_hcd_platform_shutdown, - .driver.name = "orion-ehci", + .driver = { + .name = "orion-ehci", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(ehci_orion_dt_ids), + }, }; diff --git a/drivers/usb/host/ohci-xls.c b/drivers/usb/host/ohci-xls.c index 84201cd1a47..41e378f17c6 100644 --- a/drivers/usb/host/ohci-xls.c +++ b/drivers/usb/host/ohci-xls.c @@ -56,7 +56,7 @@ static int ohci_xls_probe_internal(const struct hc_driver *driver, goto err3; } - retval = usb_add_hcd(hcd, irq, IRQF_SHARED); + retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); if (retval != 0) goto err4; return retval; diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index d0b87e7b4ab..b6b84dacc79 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -707,11 +707,12 @@ static void rxstate(struct musb *musb, struct musb_request *req) fifo_count = musb_readw(epio, MUSB_RXCOUNT); /* - * use mode 1 only if we expect data of at least ep packet_sz - * and have not yet received a short packet + * Enable Mode 1 on RX transfers only when short_not_ok flag + * is set. Currently short_not_ok flag is set only from + * file_storage and f_mass_storage drivers */ - if ((request->length - request->actual >= musb_ep->packet_sz) && - (fifo_count >= musb_ep->packet_sz)) + + if (request->short_not_ok && fifo_count == musb_ep->packet_sz) use_mode_1 = 1; else use_mode_1 = 0; @@ -727,6 +728,27 @@ static void rxstate(struct musb *musb, struct musb_request *req) c = musb->dma_controller; channel = musb_ep->dma; + /* We use DMA Req mode 0 in rx_csr, and DMA controller operates in + * mode 0 only. So we do not get endpoint interrupts due to DMA + * completion. We only get interrupts from DMA controller. + * + * We could operate in DMA mode 1 if we knew the size of the tranfer + * in advance. For mass storage class, request->length = what the host + * sends, so that'd work. But for pretty much everything else, + * request->length is routinely more than what the host sends. For + * most these gadgets, end of is signified either by a short packet, + * or filling the last byte of the buffer. (Sending extra data in + * that last pckate should trigger an overflow fault.) But in mode 1, + * we don't get DMA completion interrupt for short packets. + * + * Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1), + * to get endpoint interrupt on every DMA req, but that didn't seem + * to work reliably. + * + * REVISIT an updated g_file_storage can set req->short_not_ok, which + * then becomes usable as a runtime "use mode 1" hint... + */ + /* Experimental: Mode1 works with mass storage use cases */ if (use_mode_1) { csr |= MUSB_RXCSR_AUTOCLEAR; diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c index d62a91fedc2..0e62f504410 100644 --- a/drivers/usb/musb/ux500.c +++ b/drivers/usb/musb/ux500.c @@ -65,7 +65,7 @@ static int __devinit ux500_probe(struct platform_device *pdev) struct platform_device *musb; struct ux500_glue *glue; struct clk *clk; - + int musbid; int ret = -ENOMEM; glue = kzalloc(sizeof(*glue), GFP_KERNEL); diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index d8c8a42bff3..6223062d5d1 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -58,7 +58,7 @@ config USB_ULPI_VIEWPORT config TWL4030_USB tristate "TWL4030 USB Transceiver Driver" - depends on TWL4030_CORE && REGULATOR_TWL4030 + depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS select USB_OTG_UTILS help Enable this to support the USB OTG transceiver on TWL4030 @@ -68,7 +68,7 @@ config TWL4030_USB config TWL6030_USB tristate "TWL6030 USB Transceiver Driver" - depends on TWL4030_CORE && OMAP_USB2 + depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS select USB_OTG_UTILS help Enable this to support the USB OTG transceiver on TWL6030 diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 7179b0c5f81..cff8dd5b462 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -2430,7 +2430,7 @@ static void keyspan_release(struct usb_serial *serial) static int keyspan_port_probe(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; - struct keyspan_port_private *s_priv; + struct keyspan_serial_private *s_priv; struct keyspan_port_private *p_priv; const struct keyspan_device_details *d_details; struct callbacks *cback; @@ -2445,7 +2445,6 @@ static int keyspan_port_probe(struct usb_serial_port *port) if (!p_priv) return -ENOMEM; - s_priv = usb_get_serial_data(port->serial); p_priv->device_details = d_details; /* Setup values for the various callback routines */ diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 5dee7d61241..edc64bb6f45 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -158,6 +158,7 @@ static void option_instat_callback(struct urb *urb); #define NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_HIGHSPEED 0x8001 #define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED 0x9000 #define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED 0x9001 +#define NOVATELWIRELESS_PRODUCT_E362 0x9010 #define NOVATELWIRELESS_PRODUCT_G1 0xA001 #define NOVATELWIRELESS_PRODUCT_G1_M 0xA002 #define NOVATELWIRELESS_PRODUCT_G2 0xA010 @@ -193,6 +194,9 @@ static void option_instat_callback(struct urb *urb); #define DELL_PRODUCT_5730_MINICARD_TELUS 0x8181 #define DELL_PRODUCT_5730_MINICARD_VZW 0x8182 +#define DELL_PRODUCT_5800_MINICARD_VZW 0x8195 /* Novatel E362 */ +#define DELL_PRODUCT_5800_V2_MINICARD_VZW 0x8196 /* Novatel E362 */ + #define KYOCERA_VENDOR_ID 0x0c88 #define KYOCERA_PRODUCT_KPC650 0x17da #define KYOCERA_PRODUCT_KPC680 0x180a @@ -283,6 +287,7 @@ static void option_instat_callback(struct urb *urb); /* ALCATEL PRODUCTS */ #define ALCATEL_VENDOR_ID 0x1bbb #define ALCATEL_PRODUCT_X060S_X200 0x0000 +#define ALCATEL_PRODUCT_X220_X500D 0x0017 #define PIRELLI_VENDOR_ID 0x1266 #define PIRELLI_PRODUCT_C100_1 0x1002 @@ -706,6 +711,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G2) }, /* Novatel Ovation MC551 a.k.a. Verizon USB551L */ { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC551, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E362, 0xff, 0xff, 0xff) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) }, @@ -728,6 +734,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_SPRINT) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */ { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_TELUS) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */ { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_VZW) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */ + { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_MINICARD_VZW, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_V2_MINICARD_VZW, 0xff, 0xff, 0xff) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) }, /* ADU-E100, ADU-310 */ { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) }, @@ -1157,6 +1165,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200), .driver_info = (kernel_ulong_t)&alcatel_x200_blacklist }, + { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D) }, { USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) }, { USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) }, { USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14), diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index 61a73ad1a18..a3e9c095f0d 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -455,9 +455,6 @@ static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port, struct usb_serial *serial = port->serial; struct urb *urb; - if (endpoint == -1) - return NULL; /* endpoint not needed */ - urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */ if (urb == NULL) { dev_dbg(&serial->interface->dev, @@ -489,6 +486,9 @@ int usb_wwan_port_probe(struct usb_serial_port *port) init_usb_anchor(&portdata->delayed); for (i = 0; i < N_IN_URB; i++) { + if (!port->bulk_in_size) + break; + buffer = (u8 *)__get_free_page(GFP_KERNEL); if (!buffer) goto bail_out_error; @@ -502,8 +502,8 @@ int usb_wwan_port_probe(struct usb_serial_port *port) } for (i = 0; i < N_OUT_URB; i++) { - if (port->bulk_out_endpointAddress == -1) - continue; + if (!port->bulk_out_size) + break; buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL); if (!buffer) diff --git a/fs/proc/base.c b/fs/proc/base.c index 144a96732dd..3c231adf845 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -873,6 +873,113 @@ static const struct file_operations proc_environ_operations = { .release = mem_release, }; +static ssize_t oom_adj_read(struct file *file, char __user *buf, size_t count, + loff_t *ppos) +{ + struct task_struct *task = get_proc_task(file->f_path.dentry->d_inode); + char buffer[PROC_NUMBUF]; + int oom_adj = OOM_ADJUST_MIN; + size_t len; + unsigned long flags; + + if (!task) + return -ESRCH; + if (lock_task_sighand(task, &flags)) { + if (task->signal->oom_score_adj == OOM_SCORE_ADJ_MAX) + oom_adj = OOM_ADJUST_MAX; + else + oom_adj = (task->signal->oom_score_adj * -OOM_DISABLE) / + OOM_SCORE_ADJ_MAX; + unlock_task_sighand(task, &flags); + } + put_task_struct(task); + len = snprintf(buffer, sizeof(buffer), "%d\n", oom_adj); + return simple_read_from_buffer(buf, count, ppos, buffer, len); +} + +static ssize_t oom_adj_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + struct task_struct *task; + char buffer[PROC_NUMBUF]; + int oom_adj; + unsigned long flags; + int err; + + memset(buffer, 0, sizeof(buffer)); + if (count > sizeof(buffer) - 1) + count = sizeof(buffer) - 1; + if (copy_from_user(buffer, buf, count)) { + err = -EFAULT; + goto out; + } + + err = kstrtoint(strstrip(buffer), 0, &oom_adj); + if (err) + goto out; + if ((oom_adj < OOM_ADJUST_MIN || oom_adj > OOM_ADJUST_MAX) && + oom_adj != OOM_DISABLE) { + err = -EINVAL; + goto out; + } + + task = get_proc_task(file->f_path.dentry->d_inode); + if (!task) { + err = -ESRCH; + goto out; + } + + task_lock(task); + if (!task->mm) { + err = -EINVAL; + goto err_task_lock; + } + + if (!lock_task_sighand(task, &flags)) { + err = -ESRCH; + goto err_task_lock; + } + + /* + * Scale /proc/pid/oom_score_adj appropriately ensuring that a maximum + * value is always attainable. + */ + if (oom_adj == OOM_ADJUST_MAX) + oom_adj = OOM_SCORE_ADJ_MAX; + else + oom_adj = (oom_adj * OOM_SCORE_ADJ_MAX) / -OOM_DISABLE; + + if (oom_adj < task->signal->oom_score_adj && + !capable(CAP_SYS_RESOURCE)) { + err = -EACCES; + goto err_sighand; + } + + /* + * /proc/pid/oom_adj is provided for legacy purposes, ask users to use + * /proc/pid/oom_score_adj instead. + */ + printk_once(KERN_WARNING "%s (%d): /proc/%d/oom_adj is deprecated, please use /proc/%d/oom_score_adj instead.\n", + current->comm, task_pid_nr(current), task_pid_nr(task), + task_pid_nr(task)); + + task->signal->oom_score_adj = oom_adj; + trace_oom_score_adj_update(task); +err_sighand: + unlock_task_sighand(task, &flags); +err_task_lock: + task_unlock(task); + put_task_struct(task); +out: + return err < 0 ? err : count; +} + +static const struct file_operations proc_oom_adj_operations = { + .read = oom_adj_read, + .write = oom_adj_write, + .llseek = generic_file_llseek, +}; + static ssize_t oom_score_adj_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { @@ -2598,6 +2705,7 @@ static const struct pid_entry tgid_base_stuff[] = { REG("cgroup", S_IRUGO, proc_cgroup_operations), #endif INF("oom_score", S_IRUGO, proc_oom_score), + REG("oom_adj", S_IRUGO|S_IWUSR, proc_oom_adj_operations), REG("oom_score_adj", S_IRUGO|S_IWUSR, proc_oom_score_adj_operations), #ifdef CONFIG_AUDITSYSCALL REG("loginuid", S_IWUSR|S_IRUGO, proc_loginuid_operations), @@ -2964,6 +3072,7 @@ static const struct pid_entry tid_base_stuff[] = { REG("cgroup", S_IRUGO, proc_cgroup_operations), #endif INF("oom_score", S_IRUGO, proc_oom_score), + REG("oom_adj", S_IRUGO|S_IWUSR, proc_oom_adj_operations), REG("oom_score_adj", S_IRUGO|S_IWUSR, proc_oom_score_adj_operations), #ifdef CONFIG_AUDITSYSCALL REG("loginuid", S_IWUSR|S_IRUGO, proc_loginuid_operations), diff --git a/fs/pstore/platform.c b/fs/pstore/platform.c index a40da07e93d..947fbe06c3b 100644 --- a/fs/pstore/platform.c +++ b/fs/pstore/platform.c @@ -161,6 +161,7 @@ static void pstore_console_write(struct console *con, const char *s, unsigned c) while (s < e) { unsigned long flags; + u64 id; if (c > psinfo->bufsize) c = psinfo->bufsize; @@ -172,7 +173,7 @@ static void pstore_console_write(struct console *con, const char *s, unsigned c) spin_lock_irqsave(&psinfo->buf_lock, flags); } memcpy(psinfo->buf, s, c); - psinfo->write(PSTORE_TYPE_CONSOLE, 0, NULL, 0, c, psinfo); + psinfo->write(PSTORE_TYPE_CONSOLE, 0, &id, 0, c, psinfo); spin_unlock_irqrestore(&psinfo->buf_lock, flags); s += c; c = e - s; diff --git a/fs/ubifs/find.c b/fs/ubifs/find.c index 28ec13af28d..2dcf3d473fe 100644 --- a/fs/ubifs/find.c +++ b/fs/ubifs/find.c @@ -681,8 +681,16 @@ int ubifs_find_free_leb_for_idx(struct ubifs_info *c) if (!lprops) { lprops = ubifs_fast_find_freeable(c); if (!lprops) { - ubifs_assert(c->freeable_cnt == 0); - if (c->lst.empty_lebs - c->lst.taken_empty_lebs > 0) { + /* + * The first condition means the following: go scan the + * LPT if there are uncategorized lprops, which means + * there may be freeable LEBs there (UBIFS does not + * store the information about freeable LEBs in the + * master node). + */ + if (c->in_a_category_cnt != c->main_lebs || + c->lst.empty_lebs - c->lst.taken_empty_lebs > 0) { + ubifs_assert(c->freeable_cnt == 0); lprops = scan_for_leb_for_idx(c); if (IS_ERR(lprops)) { err = PTR_ERR(lprops); diff --git a/fs/ubifs/lprops.c b/fs/ubifs/lprops.c index e5a2a35a46d..46190a7c42a 100644 --- a/fs/ubifs/lprops.c +++ b/fs/ubifs/lprops.c @@ -300,8 +300,11 @@ void ubifs_add_to_cat(struct ubifs_info *c, struct ubifs_lprops *lprops, default: ubifs_assert(0); } + lprops->flags &= ~LPROPS_CAT_MASK; lprops->flags |= cat; + c->in_a_category_cnt += 1; + ubifs_assert(c->in_a_category_cnt <= c->main_lebs); } /** @@ -334,6 +337,9 @@ static void ubifs_remove_from_cat(struct ubifs_info *c, default: ubifs_assert(0); } + + c->in_a_category_cnt -= 1; + ubifs_assert(c->in_a_category_cnt >= 0); } /** diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h index 5486346d0a3..d133c276fe0 100644 --- a/fs/ubifs/ubifs.h +++ b/fs/ubifs/ubifs.h @@ -1183,6 +1183,8 @@ struct ubifs_debug_info; * @freeable_list: list of freeable non-index LEBs (free + dirty == @leb_size) * @frdi_idx_list: list of freeable index LEBs (free + dirty == @leb_size) * @freeable_cnt: number of freeable LEBs in @freeable_list + * @in_a_category_cnt: count of lprops which are in a certain category, which + * basically meants that they were loaded from the flash * * @ltab_lnum: LEB number of LPT's own lprops table * @ltab_offs: offset of LPT's own lprops table @@ -1412,6 +1414,7 @@ struct ubifs_info { struct list_head freeable_list; struct list_head frdi_idx_list; int freeable_cnt; + int in_a_category_cnt; int ltab_lnum; int ltab_offs; diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index c1273158292..f9f5e9eeb9d 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -335,8 +335,8 @@ const char *__clk_get_name(struct clk *clk); struct clk_hw *__clk_get_hw(struct clk *clk); u8 __clk_get_num_parents(struct clk *clk); struct clk *__clk_get_parent(struct clk *clk); -inline int __clk_get_enable_count(struct clk *clk); -inline int __clk_get_prepare_count(struct clk *clk); +int __clk_get_enable_count(struct clk *clk); +int __clk_get_prepare_count(struct clk *clk); unsigned long __clk_get_rate(struct clk *clk); unsigned long __clk_get_flags(struct clk *clk); int __clk_is_enabled(struct clk *clk); diff --git a/include/linux/mm.h b/include/linux/mm.h index fa068040273..bcaab4e6fe9 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1684,9 +1684,5 @@ static inline unsigned int debug_guardpage_minorder(void) { return 0; } static inline bool page_is_guard(struct page *page) { return false; } #endif /* CONFIG_DEBUG_PAGEALLOC */ -extern void reset_zone_present_pages(void); -extern void fixup_zone_present_pages(int nid, unsigned long start_pfn, - unsigned long end_pfn); - #endif /* __KERNEL__ */ #endif /* _LINUX_MM_H */ diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 50aaca81f63..a23923ba826 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -752,7 +752,7 @@ extern int init_currently_empty_zone(struct zone *zone, unsigned long start_pfn, unsigned long size, enum memmap_context context); -extern void lruvec_init(struct lruvec *lruvec, struct zone *zone); +extern void lruvec_init(struct lruvec *lruvec); static inline struct zone *lruvec_zone(struct lruvec *lruvec) { diff --git a/include/linux/platform_data/omap_ocp2scp.h b/include/linux/platform_data/omap_ocp2scp.h new file mode 100644 index 00000000000..5c6c3939355 --- /dev/null +++ b/include/linux/platform_data/omap_ocp2scp.h @@ -0,0 +1,31 @@ +/* + * omap_ocp2scp.h -- ocp2scp header file + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Author: Kishon Vijay Abraham I <kishon@ti.com> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __DRIVERS_OMAP_OCP2SCP_H +#define __DRIVERS_OMAP_OCP2SCP_H + +struct omap_ocp2scp_dev { + const char *drv_name; + struct resource *res; +}; + +struct omap_ocp2scp_platform_data { + int dev_cnt; + struct omap_ocp2scp_dev **devices; +}; +#endif /* __DRIVERS_OMAP_OCP2SCP_H */ diff --git a/include/linux/rio.h b/include/linux/rio.h index 4187da51100..a3e78427866 100644 --- a/include/linux/rio.h +++ b/include/linux/rio.h @@ -275,9 +275,11 @@ struct rio_id_table { * struct rio_net - RIO network info * @node: Node in global list of RIO networks * @devices: List of devices in this network + * @switches: List of switches in this netowrk * @mports: List of master ports accessing this network * @hport: Default port for accessing this network * @id: RIO network ID + * @destid_table: destID allocation table */ struct rio_net { struct list_head node; /* node in list of networks */ diff --git a/include/uapi/linux/oom.h b/include/uapi/linux/oom.h index a49c4afc706..b29272d621c 100644 --- a/include/uapi/linux/oom.h +++ b/include/uapi/linux/oom.h @@ -8,4 +8,13 @@ #define OOM_SCORE_ADJ_MIN (-1000) #define OOM_SCORE_ADJ_MAX 1000 +/* + * /proc/<pid>/oom_adj set to -17 protects from the oom killer for legacy + * purposes. + */ +#define OOM_DISABLE (-17) +/* inclusive */ +#define OOM_ADJUST_MIN (-16) +#define OOM_ADJUST_MAX 15 + #endif /* _UAPI__INCLUDE_LINUX_OOM_H */ diff --git a/kernel/futex.c b/kernel/futex.c index 3717e7b306e..20ef219bbe9 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -716,7 +716,7 @@ static int futex_lock_pi_atomic(u32 __user *uaddr, struct futex_hash_bucket *hb, struct futex_pi_state **ps, struct task_struct *task, int set_waiters) { - int lock_taken, ret, ownerdied = 0; + int lock_taken, ret, force_take = 0; u32 uval, newval, curval, vpid = task_pid_vnr(task); retry: @@ -755,17 +755,15 @@ retry: newval = curval | FUTEX_WAITERS; /* - * There are two cases, where a futex might have no owner (the - * owner TID is 0): OWNER_DIED. We take over the futex in this - * case. We also do an unconditional take over, when the owner - * of the futex died. - * - * This is safe as we are protected by the hash bucket lock ! + * Should we force take the futex? See below. */ - if (unlikely(ownerdied || !(curval & FUTEX_TID_MASK))) { - /* Keep the OWNER_DIED bit */ + if (unlikely(force_take)) { + /* + * Keep the OWNER_DIED and the WAITERS bit and set the + * new TID value. + */ newval = (curval & ~FUTEX_TID_MASK) | vpid; - ownerdied = 0; + force_take = 0; lock_taken = 1; } @@ -775,7 +773,7 @@ retry: goto retry; /* - * We took the lock due to owner died take over. + * We took the lock due to forced take over. */ if (unlikely(lock_taken)) return 1; @@ -790,20 +788,25 @@ retry: switch (ret) { case -ESRCH: /* - * No owner found for this futex. Check if the - * OWNER_DIED bit is set to figure out whether - * this is a robust futex or not. + * We failed to find an owner for this + * futex. So we have no pi_state to block + * on. This can happen in two cases: + * + * 1) The owner died + * 2) A stale FUTEX_WAITERS bit + * + * Re-read the futex value. */ if (get_futex_value_locked(&curval, uaddr)) return -EFAULT; /* - * We simply start over in case of a robust - * futex. The code above will take the futex - * and return happy. + * If the owner died or we have a stale + * WAITERS bit the owner TID in the user space + * futex is 0. */ - if (curval & FUTEX_OWNER_DIED) { - ownerdied = 1; + if (!(curval & FUTEX_TID_MASK)) { + force_take = 1; goto retry; } default: diff --git a/mm/bootmem.c b/mm/bootmem.c index 434be4ae7a0..f468185b3b2 100644 --- a/mm/bootmem.c +++ b/mm/bootmem.c @@ -198,8 +198,6 @@ static unsigned long __init free_all_bootmem_core(bootmem_data_t *bdata) int order = ilog2(BITS_PER_LONG); __free_pages_bootmem(pfn_to_page(start), order); - fixup_zone_present_pages(page_to_nid(pfn_to_page(start)), - start, start + BITS_PER_LONG); count += BITS_PER_LONG; start += BITS_PER_LONG; } else { @@ -210,9 +208,6 @@ static unsigned long __init free_all_bootmem_core(bootmem_data_t *bdata) if (vec & 1) { page = pfn_to_page(start + off); __free_pages_bootmem(page, 0); - fixup_zone_present_pages( - page_to_nid(page), - start + off, start + off + 1); count++; } vec >>= 1; @@ -226,11 +221,8 @@ static unsigned long __init free_all_bootmem_core(bootmem_data_t *bdata) pages = bdata->node_low_pfn - bdata->node_min_pfn; pages = bootmem_bootmap_pages(pages); count += pages; - while (pages--) { - fixup_zone_present_pages(page_to_nid(page), - page_to_pfn(page), page_to_pfn(page) + 1); + while (pages--) __free_pages_bootmem(page++, 0); - } bdebug("nid=%td released=%lx\n", bdata - bootmem_node_data, count); diff --git a/mm/highmem.c b/mm/highmem.c index d517cd16a6e..2da13a5c50e 100644 --- a/mm/highmem.c +++ b/mm/highmem.c @@ -98,7 +98,7 @@ struct page *kmap_to_page(void *vaddr) { unsigned long addr = (unsigned long)vaddr; - if (addr >= PKMAP_ADDR(0) && addr <= PKMAP_ADDR(LAST_PKMAP)) { + if (addr >= PKMAP_ADDR(0) && addr < PKMAP_ADDR(LAST_PKMAP)) { int i = (addr - PKMAP_ADDR(0)) >> PAGE_SHIFT; return pte_page(pkmap_page_table[i]); } diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 7acf43bf04a..dd39ba000b3 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -1055,12 +1055,24 @@ struct lruvec *mem_cgroup_zone_lruvec(struct zone *zone, struct mem_cgroup *memcg) { struct mem_cgroup_per_zone *mz; + struct lruvec *lruvec; - if (mem_cgroup_disabled()) - return &zone->lruvec; + if (mem_cgroup_disabled()) { + lruvec = &zone->lruvec; + goto out; + } mz = mem_cgroup_zoneinfo(memcg, zone_to_nid(zone), zone_idx(zone)); - return &mz->lruvec; + lruvec = &mz->lruvec; +out: + /* + * Since a node can be onlined after the mem_cgroup was created, + * we have to be prepared to initialize lruvec->zone here; + * and if offlined then reonlined, we need to reinitialize it. + */ + if (unlikely(lruvec->zone != zone)) + lruvec->zone = zone; + return lruvec; } /* @@ -1087,9 +1099,12 @@ struct lruvec *mem_cgroup_page_lruvec(struct page *page, struct zone *zone) struct mem_cgroup_per_zone *mz; struct mem_cgroup *memcg; struct page_cgroup *pc; + struct lruvec *lruvec; - if (mem_cgroup_disabled()) - return &zone->lruvec; + if (mem_cgroup_disabled()) { + lruvec = &zone->lruvec; + goto out; + } pc = lookup_page_cgroup(page); memcg = pc->mem_cgroup; @@ -1107,7 +1122,16 @@ struct lruvec *mem_cgroup_page_lruvec(struct page *page, struct zone *zone) pc->mem_cgroup = memcg = root_mem_cgroup; mz = page_cgroup_zoneinfo(memcg, page); - return &mz->lruvec; + lruvec = &mz->lruvec; +out: + /* + * Since a node can be onlined after the mem_cgroup was created, + * we have to be prepared to initialize lruvec->zone here; + * and if offlined then reonlined, we need to reinitialize it. + */ + if (unlikely(lruvec->zone != zone)) + lruvec->zone = zone; + return lruvec; } /** @@ -1452,17 +1476,26 @@ static int mem_cgroup_count_children(struct mem_cgroup *memcg) static u64 mem_cgroup_get_limit(struct mem_cgroup *memcg) { u64 limit; - u64 memsw; limit = res_counter_read_u64(&memcg->res, RES_LIMIT); - limit += total_swap_pages << PAGE_SHIFT; - memsw = res_counter_read_u64(&memcg->memsw, RES_LIMIT); /* - * If memsw is finite and limits the amount of swap space available - * to this memcg, return that limit. + * Do not consider swap space if we cannot swap due to swappiness */ - return min(limit, memsw); + if (mem_cgroup_swappiness(memcg)) { + u64 memsw; + + limit += total_swap_pages << PAGE_SHIFT; + memsw = res_counter_read_u64(&memcg->memsw, RES_LIMIT); + + /* + * If memsw is finite and limits the amount of swap space + * available to this memcg, return that limit. + */ + limit = min(limit, memsw); + } + + return limit; } void mem_cgroup_out_of_memory(struct mem_cgroup *memcg, gfp_t gfp_mask, @@ -3688,17 +3721,17 @@ unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order, static bool mem_cgroup_force_empty_list(struct mem_cgroup *memcg, int node, int zid, enum lru_list lru) { - struct mem_cgroup_per_zone *mz; + struct lruvec *lruvec; unsigned long flags, loop; struct list_head *list; struct page *busy; struct zone *zone; zone = &NODE_DATA(node)->node_zones[zid]; - mz = mem_cgroup_zoneinfo(memcg, node, zid); - list = &mz->lruvec.lists[lru]; + lruvec = mem_cgroup_zone_lruvec(zone, memcg); + list = &lruvec->lists[lru]; - loop = mz->lru_size[lru]; + loop = mem_cgroup_get_lru_size(lruvec, lru); /* give some margin against EBUSY etc...*/ loop += 256; busy = NULL; @@ -4736,7 +4769,7 @@ static int alloc_mem_cgroup_per_zone_info(struct mem_cgroup *memcg, int node) for (zone = 0; zone < MAX_NR_ZONES; zone++) { mz = &pn->zoneinfo[zone]; - lruvec_init(&mz->lruvec, &NODE_DATA(node)->node_zones[zone]); + lruvec_init(&mz->lruvec); mz->usage_in_excess = 0; mz->on_tree = false; mz->memcg = memcg; diff --git a/mm/memory.c b/mm/memory.c index fb135ba4aba..221fc9ffcab 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -2527,9 +2527,8 @@ static int do_wp_page(struct mm_struct *mm, struct vm_area_struct *vma, int ret = 0; int page_mkwrite = 0; struct page *dirty_page = NULL; - unsigned long mmun_start; /* For mmu_notifiers */ - unsigned long mmun_end; /* For mmu_notifiers */ - bool mmun_called = false; /* For mmu_notifiers */ + unsigned long mmun_start = 0; /* For mmu_notifiers */ + unsigned long mmun_end = 0; /* For mmu_notifiers */ old_page = vm_normal_page(vma, address, orig_pte); if (!old_page) { @@ -2708,8 +2707,7 @@ gotten: goto oom_free_new; mmun_start = address & PAGE_MASK; - mmun_end = (address & PAGE_MASK) + PAGE_SIZE; - mmun_called = true; + mmun_end = mmun_start + PAGE_SIZE; mmu_notifier_invalidate_range_start(mm, mmun_start, mmun_end); /* @@ -2778,7 +2776,7 @@ gotten: page_cache_release(new_page); unlock: pte_unmap_unlock(page_table, ptl); - if (mmun_called) + if (mmun_end > mmun_start) mmu_notifier_invalidate_range_end(mm, mmun_start, mmun_end); if (old_page) { /* diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index 56b758ae57d..e4eeacae2b9 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -106,7 +106,6 @@ static void get_page_bootmem(unsigned long info, struct page *page, void __ref put_page_bootmem(struct page *page) { unsigned long type; - struct zone *zone; type = (unsigned long) page->lru.next; BUG_ON(type < MEMORY_HOTPLUG_MIN_BOOTMEM_TYPE || @@ -117,12 +116,6 @@ void __ref put_page_bootmem(struct page *page) set_page_private(page, 0); INIT_LIST_HEAD(&page->lru); __free_pages_bootmem(page, 0); - - zone = page_zone(page); - zone_span_writelock(zone); - zone->present_pages++; - zone_span_writeunlock(zone); - totalram_pages++; } } diff --git a/mm/mmap.c b/mm/mmap.c index 2d942353d68..9a796c41e7d 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -334,8 +334,10 @@ void validate_mm(struct mm_struct *mm) struct vm_area_struct *vma = mm->mmap; while (vma) { struct anon_vma_chain *avc; + vma_lock_anon_vma(vma); list_for_each_entry(avc, &vma->anon_vma_chain, same_vma) anon_vma_interval_tree_verify(avc); + vma_unlock_anon_vma(vma); vma = vma->vm_next; i++; } diff --git a/mm/mmzone.c b/mm/mmzone.c index 3cef80f6ac7..4596d81b89b 100644 --- a/mm/mmzone.c +++ b/mm/mmzone.c @@ -87,7 +87,7 @@ int memmap_valid_within(unsigned long pfn, } #endif /* CONFIG_ARCH_HAS_HOLES_MEMORYMODEL */ -void lruvec_init(struct lruvec *lruvec, struct zone *zone) +void lruvec_init(struct lruvec *lruvec) { enum lru_list lru; @@ -95,8 +95,4 @@ void lruvec_init(struct lruvec *lruvec, struct zone *zone) for_each_lru(lru) INIT_LIST_HEAD(&lruvec->lists[lru]); - -#ifdef CONFIG_MEMCG - lruvec->zone = zone; -#endif } diff --git a/mm/nobootmem.c b/mm/nobootmem.c index 714d5d65047..bd82f6b3141 100644 --- a/mm/nobootmem.c +++ b/mm/nobootmem.c @@ -116,8 +116,6 @@ static unsigned long __init __free_memory_core(phys_addr_t start, return 0; __free_pages_memory(start_pfn, end_pfn); - fixup_zone_present_pages(pfn_to_nid(start >> PAGE_SHIFT), - start_pfn, end_pfn); return end_pfn - start_pfn; } @@ -128,7 +126,6 @@ unsigned long __init free_low_memory_core_early(int nodeid) phys_addr_t start, end, size; u64 i; - reset_zone_present_pages(); for_each_free_mem_range(i, MAX_NUMNODES, &start, &end, NULL) count += __free_memory_core(start, end); diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 5b74de6702e..7bb35ac0964 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -4505,7 +4505,7 @@ static void __paginginit free_area_init_core(struct pglist_data *pgdat, zone->zone_pgdat = pgdat; zone_pcp_init(zone); - lruvec_init(&zone->lruvec, zone); + lruvec_init(&zone->lruvec); if (!size) continue; @@ -6098,37 +6098,3 @@ void dump_page(struct page *page) dump_page_flags(page->flags); mem_cgroup_print_bad_page(page); } - -/* reset zone->present_pages */ -void reset_zone_present_pages(void) -{ - struct zone *z; - int i, nid; - - for_each_node_state(nid, N_HIGH_MEMORY) { - for (i = 0; i < MAX_NR_ZONES; i++) { - z = NODE_DATA(nid)->node_zones + i; - z->present_pages = 0; - } - } -} - -/* calculate zone's present pages in buddy system */ -void fixup_zone_present_pages(int nid, unsigned long start_pfn, - unsigned long end_pfn) -{ - struct zone *z; - unsigned long zone_start_pfn, zone_end_pfn; - int i; - - for (i = 0; i < MAX_NR_ZONES; i++) { - z = NODE_DATA(nid)->node_zones + i; - zone_start_pfn = z->zone_start_pfn; - zone_end_pfn = zone_start_pfn + z->spanned_pages; - - /* if the two regions intersect */ - if (!(zone_start_pfn >= end_pfn || zone_end_pfn <= start_pfn)) - z->present_pages += min(end_pfn, zone_end_pfn) - - max(start_pfn, zone_start_pfn); - } -} diff --git a/mm/shmem.c b/mm/shmem.c index 67afba5117f..89341b658bd 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -643,7 +643,7 @@ static void shmem_evict_inode(struct inode *inode) kfree(info->symlink); simple_xattrs_free(&info->xattrs); - BUG_ON(inode->i_blocks); + WARN_ON(inode->i_blocks); shmem_free_inode(inode->i_sb); clear_inode(inode); } @@ -1145,8 +1145,20 @@ repeat: if (!error) { error = shmem_add_to_page_cache(page, mapping, index, gfp, swp_to_radix_entry(swap)); - /* We already confirmed swap, and make no allocation */ - VM_BUG_ON(error); + /* + * We already confirmed swap under page lock, and make + * no memory allocation here, so usually no possibility + * of error; but free_swap_and_cache() only trylocks a + * page, so it is just possible that the entry has been + * truncated or holepunched since swap was confirmed. + * shmem_undo_range() will have done some of the + * unaccounting, now delete_from_swap_cache() will do + * the rest (including mem_cgroup_uncharge_swapcache). + * Reset swap.val? No, leave it so "failed" goes back to + * "repeat": reading a hole and writing should succeed. + */ + if (error) + delete_from_swap_cache(page); } if (error) goto failed; diff --git a/mm/swapfile.c b/mm/swapfile.c index 71cd288b200..f91a25547ff 100644 --- a/mm/swapfile.c +++ b/mm/swapfile.c @@ -1494,9 +1494,8 @@ SYSCALL_DEFINE1(swapoff, const char __user *, specialfile) BUG_ON(!current->mm); pathname = getname(specialfile); - err = PTR_ERR(pathname); if (IS_ERR(pathname)) - goto out; + return PTR_ERR(pathname); victim = file_open_name(pathname, O_RDWR|O_LARGEFILE, 0); err = PTR_ERR(victim); @@ -1608,6 +1607,7 @@ SYSCALL_DEFINE1(swapoff, const char __user *, specialfile) out_dput: filp_close(victim, NULL); out: + putname(pathname); return err; } diff --git a/mm/vmscan.c b/mm/vmscan.c index 8b055e9379b..48550c66f1f 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -1760,28 +1760,6 @@ static bool in_reclaim_compaction(struct scan_control *sc) return false; } -#ifdef CONFIG_COMPACTION -/* - * If compaction is deferred for sc->order then scale the number of pages - * reclaimed based on the number of consecutive allocation failures - */ -static unsigned long scale_for_compaction(unsigned long pages_for_compaction, - struct lruvec *lruvec, struct scan_control *sc) -{ - struct zone *zone = lruvec_zone(lruvec); - - if (zone->compact_order_failed <= sc->order) - pages_for_compaction <<= zone->compact_defer_shift; - return pages_for_compaction; -} -#else -static unsigned long scale_for_compaction(unsigned long pages_for_compaction, - struct lruvec *lruvec, struct scan_control *sc) -{ - return pages_for_compaction; -} -#endif - /* * Reclaim/compaction is used for high-order allocation requests. It reclaims * order-0 pages before compacting the zone. should_continue_reclaim() returns @@ -1829,9 +1807,6 @@ static inline bool should_continue_reclaim(struct lruvec *lruvec, * inactive lists are large enough, continue reclaiming */ pages_for_compaction = (2UL << sc->order); - - pages_for_compaction = scale_for_compaction(pages_for_compaction, - lruvec, sc); inactive_lru_pages = get_lru_size(lruvec, LRU_INACTIVE_FILE); if (nr_swap_pages > 0) inactive_lru_pages += get_lru_size(lruvec, LRU_INACTIVE_ANON); diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c index b9a28d2dd3e..ce0684a1fc8 100644 --- a/net/batman-adv/soft-interface.c +++ b/net/batman-adv/soft-interface.c @@ -325,6 +325,12 @@ void batadv_interface_rx(struct net_device *soft_iface, soft_iface->last_rx = jiffies; + /* Let the bridge loop avoidance check the packet. If will + * not handle it, we can safely push it up. + */ + if (batadv_bla_rx(bat_priv, skb, vid, is_bcast)) + goto out; + if (orig_node) batadv_tt_add_temporary_global_entry(bat_priv, orig_node, ethhdr->h_source); @@ -332,12 +338,6 @@ void batadv_interface_rx(struct net_device *soft_iface, if (batadv_is_ap_isolated(bat_priv, ethhdr->h_source, ethhdr->h_dest)) goto dropped; - /* Let the bridge loop avoidance check the packet. If will - * not handle it, we can safely push it up. - */ - if (batadv_bla_rx(bat_priv, skb, vid, is_bcast)) - goto out; - netif_rx(skb); goto out; diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index 112edd371b2..baae7158580 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -769,6 +769,12 @@ int batadv_tt_global_add(struct batadv_priv *bat_priv, */ tt_global_entry->common.flags &= ~BATADV_TT_CLIENT_TEMP; + /* the change can carry possible "attribute" flags like the + * TT_CLIENT_WIFI, therefore they have to be copied in the + * client entry + */ + tt_global_entry->common.flags |= flags; + /* If there is the BATADV_TT_CLIENT_ROAM flag set, there is only * one originator left in the list and we previously received a * delete + roaming change for this originator. @@ -1496,7 +1502,7 @@ batadv_tt_response_fill_table(uint16_t tt_len, uint8_t ttvn, memcpy(tt_change->addr, tt_common_entry->addr, ETH_ALEN); - tt_change->flags = BATADV_NO_FLAGS; + tt_change->flags = tt_common_entry->flags; tt_count++; tt_change++; @@ -2450,6 +2456,13 @@ bool batadv_tt_add_temporary_global_entry(struct batadv_priv *bat_priv, { bool ret = false; + /* if the originator is a backbone node (meaning it belongs to the same + * LAN of this node) the temporary client must not be added because to + * reach such destination the node must use the LAN instead of the mesh + */ + if (batadv_bla_is_backbone_gw_orig(bat_priv, orig_node->orig)) + goto out; + if (!batadv_tt_global_add(bat_priv, orig_node, addr, BATADV_TT_CLIENT_TEMP, atomic_read(&orig_node->last_ttvn))) diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 8a0ce706aeb..a0a2f97b9c6 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -1754,11 +1754,11 @@ int hci_register_dev(struct hci_dev *hdev) if (hdev->dev_type != HCI_AMP) set_bit(HCI_AUTO_OFF, &hdev->dev_flags); - schedule_work(&hdev->power_on); - hci_notify(hdev, HCI_DEV_REG); hci_dev_hold(hdev); + schedule_work(&hdev->power_on); + return id; err_wqueue: diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index aa2ea0a8142..91de4239da6 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -326,7 +326,7 @@ static int read_index_list(struct sock *sk, struct hci_dev *hdev, void *data, struct hci_dev *d; size_t rp_len; u16 count; - int i, err; + int err; BT_DBG("sock %p", sk); @@ -347,9 +347,7 @@ static int read_index_list(struct sock *sk, struct hci_dev *hdev, void *data, return -ENOMEM; } - rp->num_controllers = cpu_to_le16(count); - - i = 0; + count = 0; list_for_each_entry(d, &hci_dev_list, list) { if (test_bit(HCI_SETUP, &d->dev_flags)) continue; @@ -357,10 +355,13 @@ static int read_index_list(struct sock *sk, struct hci_dev *hdev, void *data, if (!mgmt_valid_hdev(d)) continue; - rp->index[i++] = cpu_to_le16(d->id); + rp->index[count++] = cpu_to_le16(d->id); BT_DBG("Added hci%u", d->id); } + rp->num_controllers = cpu_to_le16(count); + rp_len = sizeof(*rp) + (2 * count); + read_unlock(&hci_dev_list_lock); err = cmd_complete(sk, MGMT_INDEX_NONE, MGMT_OP_READ_INDEX_LIST, 0, rp, @@ -1366,6 +1367,7 @@ static int remove_uuid(struct sock *sk, struct hci_dev *hdev, void *data, continue; list_del(&match->list); + kfree(match); found++; } diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c index 2ac8d50861e..a5923378bdf 100644 --- a/net/bluetooth/smp.c +++ b/net/bluetooth/smp.c @@ -267,7 +267,7 @@ static void smp_failure(struct l2cap_conn *conn, u8 reason, u8 send) clear_bit(HCI_CONN_ENCRYPT_PEND, &conn->hcon->flags); mgmt_auth_failed(conn->hcon->hdev, conn->dst, hcon->type, - hcon->dst_type, reason); + hcon->dst_type, HCI_ERROR_AUTH_FAILURE); cancel_delayed_work_sync(&conn->security_timer); diff --git a/net/core/dev.c b/net/core/dev.c index bda6d004f9f..c0946cb2b35 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2818,8 +2818,10 @@ static int get_rps_cpu(struct net_device *dev, struct sk_buff *skb, if (unlikely(tcpu != next_cpu) && (tcpu == RPS_NO_CPU || !cpu_online(tcpu) || ((int)(per_cpu(softnet_data, tcpu).input_queue_head - - rflow->last_qtail)) >= 0)) + rflow->last_qtail)) >= 0)) { + tcpu = next_cpu; rflow = set_rps_cpu(dev, skb, rflow, next_cpu); + } if (tcpu != RPS_NO_CPU && cpu_online(tcpu)) { *rflowp = rflow; diff --git a/net/core/dev_addr_lists.c b/net/core/dev_addr_lists.c index 87cc17db2d5..b079c7bbc15 100644 --- a/net/core/dev_addr_lists.c +++ b/net/core/dev_addr_lists.c @@ -319,7 +319,8 @@ int dev_addr_del(struct net_device *dev, const unsigned char *addr, */ ha = list_first_entry(&dev->dev_addrs.list, struct netdev_hw_addr, list); - if (ha->addr == dev->dev_addr && ha->refcount == 1) + if (!memcmp(ha->addr, addr, dev->addr_len) && + ha->type == addr_type && ha->refcount == 1) return -ENOENT; err = __hw_addr_del(&dev->dev_addrs, addr, dev->addr_len, diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c index 5eea4a81104..14bbfcf717a 100644 --- a/net/ipv4/ip_sockglue.c +++ b/net/ipv4/ip_sockglue.c @@ -457,19 +457,28 @@ static int do_ip_setsockopt(struct sock *sk, int level, struct inet_sock *inet = inet_sk(sk); int val = 0, err; - if (((1<<optname) & ((1<<IP_PKTINFO) | (1<<IP_RECVTTL) | - (1<<IP_RECVOPTS) | (1<<IP_RECVTOS) | - (1<<IP_RETOPTS) | (1<<IP_TOS) | - (1<<IP_TTL) | (1<<IP_HDRINCL) | - (1<<IP_MTU_DISCOVER) | (1<<IP_RECVERR) | - (1<<IP_ROUTER_ALERT) | (1<<IP_FREEBIND) | - (1<<IP_PASSSEC) | (1<<IP_TRANSPARENT) | - (1<<IP_MINTTL) | (1<<IP_NODEFRAG))) || - optname == IP_UNICAST_IF || - optname == IP_MULTICAST_TTL || - optname == IP_MULTICAST_ALL || - optname == IP_MULTICAST_LOOP || - optname == IP_RECVORIGDSTADDR) { + switch (optname) { + case IP_PKTINFO: + case IP_RECVTTL: + case IP_RECVOPTS: + case IP_RECVTOS: + case IP_RETOPTS: + case IP_TOS: + case IP_TTL: + case IP_HDRINCL: + case IP_MTU_DISCOVER: + case IP_RECVERR: + case IP_ROUTER_ALERT: + case IP_FREEBIND: + case IP_PASSSEC: + case IP_TRANSPARENT: + case IP_MINTTL: + case IP_NODEFRAG: + case IP_UNICAST_IF: + case IP_MULTICAST_TTL: + case IP_MULTICAST_ALL: + case IP_MULTICAST_LOOP: + case IP_RECVORIGDSTADDR: if (optlen >= sizeof(int)) { if (get_user(val, (int __user *) optval)) return -EFAULT; diff --git a/net/ipv4/ip_vti.c b/net/ipv4/ip_vti.c index 1831092f999..858fddf6482 100644 --- a/net/ipv4/ip_vti.c +++ b/net/ipv4/ip_vti.c @@ -338,12 +338,17 @@ static int vti_rcv(struct sk_buff *skb) if (tunnel != NULL) { struct pcpu_tstats *tstats; + if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb)) + return -1; + tstats = this_cpu_ptr(tunnel->dev->tstats); u64_stats_update_begin(&tstats->syncp); tstats->rx_packets++; tstats->rx_bytes += skb->len; u64_stats_update_end(&tstats->syncp); + skb->mark = 0; + secpath_reset(skb); skb->dev = tunnel->dev; return 1; } diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 197c0008503..083092e3aed 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -1212,7 +1212,7 @@ new_segment: wait_for_sndbuf: set_bit(SOCK_NOSPACE, &sk->sk_socket->flags); wait_for_memory: - if (copied && likely(!tp->repair)) + if (copied) tcp_push(sk, flags & ~MSG_MORE, mss_now, TCP_NAGLE_PUSH); if ((err = sk_stream_wait_memory(sk, &timeo)) != 0) @@ -1223,7 +1223,7 @@ wait_for_memory: } out: - if (copied && likely(!tp->repair)) + if (copied) tcp_push(sk, flags, mss_now, tp->nonagle); release_sock(sk); return copied + copied_syn; diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 2c2b13a999e..609ff98aeb4 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -5313,11 +5313,6 @@ static bool tcp_validate_incoming(struct sock *sk, struct sk_buff *skb, goto discard; } - /* ts_recent update must be made after we are sure that the packet - * is in window. - */ - tcp_replace_ts_recent(tp, TCP_SKB_CB(skb)->seq); - /* step 3: check security and precedence [ignored] */ /* step 4: Check for a SYN @@ -5552,6 +5547,11 @@ step5: if (th->ack && tcp_ack(sk, skb, FLAG_SLOWPATH) < 0) goto discard; + /* ts_recent update must be made after we are sure that the packet + * is in window. + */ + tcp_replace_ts_recent(tp, TCP_SKB_CB(skb)->seq); + tcp_rcv_rtt_measure_ts(sk, skb); /* Process urgent data. */ @@ -6130,6 +6130,11 @@ int tcp_rcv_state_process(struct sock *sk, struct sk_buff *skb, } else goto discard; + /* ts_recent update must be made after we are sure that the packet + * is in window. + */ + tcp_replace_ts_recent(tp, TCP_SKB_CB(skb)->seq); + /* step 6: check the URG bit */ tcp_urg(sk, skb, th); diff --git a/net/ipv4/tcp_metrics.c b/net/ipv4/tcp_metrics.c index 53bc5847bfa..f696d7c2e9f 100644 --- a/net/ipv4/tcp_metrics.c +++ b/net/ipv4/tcp_metrics.c @@ -1,7 +1,6 @@ #include <linux/rcupdate.h> #include <linux/spinlock.h> #include <linux/jiffies.h> -#include <linux/bootmem.h> #include <linux/module.h> #include <linux/cache.h> #include <linux/slab.h> @@ -9,6 +8,7 @@ #include <linux/tcp.h> #include <linux/hash.h> #include <linux/tcp_metrics.h> +#include <linux/vmalloc.h> #include <net/inet_connection_sock.h> #include <net/net_namespace.h> @@ -1034,7 +1034,10 @@ static int __net_init tcp_net_metrics_init(struct net *net) net->ipv4.tcp_metrics_hash_log = order_base_2(slots); size = sizeof(struct tcpm_hash_bucket) << net->ipv4.tcp_metrics_hash_log; - net->ipv4.tcp_metrics_hash = kzalloc(size, GFP_KERNEL); + net->ipv4.tcp_metrics_hash = kzalloc(size, GFP_KERNEL | __GFP_NOWARN); + if (!net->ipv4.tcp_metrics_hash) + net->ipv4.tcp_metrics_hash = vzalloc(size); + if (!net->ipv4.tcp_metrics_hash) return -ENOMEM; @@ -1055,7 +1058,10 @@ static void __net_exit tcp_net_metrics_exit(struct net *net) tm = next; } } - kfree(net->ipv4.tcp_metrics_hash); + if (is_vmalloc_addr(net->ipv4.tcp_metrics_hash)) + vfree(net->ipv4.tcp_metrics_hash); + else + kfree(net->ipv4.tcp_metrics_hash); } static __net_initdata struct pernet_operations tcp_net_metrics_ops = { diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index cfe6ffe1c17..2798706cb06 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -1986,6 +1986,9 @@ static bool tcp_write_xmit(struct sock *sk, unsigned int mss_now, int nonagle, tso_segs = tcp_init_tso_segs(sk, skb, mss_now); BUG_ON(!tso_segs); + if (unlikely(tp->repair) && tp->repair_queue == TCP_SEND_QUEUE) + goto repair; /* Skip network transmission */ + cwnd_quota = tcp_cwnd_test(tp, skb); if (!cwnd_quota) break; @@ -2026,6 +2029,7 @@ static bool tcp_write_xmit(struct sock *sk, unsigned int mss_now, int nonagle, if (unlikely(tcp_transmit_skb(sk, skb, 1, gfp))) break; +repair: /* Advance the send_head. This one is sent out. * This call will increment packets_out. */ diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index ba6d13d1f1e..e02faed6d17 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -827,6 +827,7 @@ pref_skip_coa: if (val < 0 || val > 255) goto e_inval; np->min_hopcount = val; + retv = 0; break; case IPV6_DONTFRAG: np->dontfrag = valbool; diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 05f3a313db8..7371f676cf4 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -2594,6 +2594,9 @@ static void ieee80211_mgmt_frame_register(struct wiphy *wiphy, else local->probe_req_reg--; + if (!local->open_count) + break; + ieee80211_queue_work(&local->hw, &local->reconfig_filter); break; default: diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 8c804550465..156e5835e37 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1314,6 +1314,8 @@ netdev_tx_t ieee80211_monitor_start_xmit(struct sk_buff *skb, struct net_device *dev); netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb, struct net_device *dev); +void ieee80211_purge_tx_queue(struct ieee80211_hw *hw, + struct sk_buff_head *skbs); /* HT */ void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata, diff --git a/net/mac80211/main.c b/net/mac80211/main.c index c80c4490351..f57f597972f 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -871,8 +871,10 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) local->hw.wiphy->cipher_suites, sizeof(u32) * local->hw.wiphy->n_cipher_suites, GFP_KERNEL); - if (!suites) - return -ENOMEM; + if (!suites) { + result = -ENOMEM; + goto fail_wiphy_register; + } for (r = 0; r < local->hw.wiphy->n_cipher_suites; r++) { u32 suite = local->hw.wiphy->cipher_suites[r]; if (suite == WLAN_CIPHER_SUITE_WEP40 || diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index c4cdbde24fd..43e60b5a754 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -917,7 +917,7 @@ int ieee80211_request_sched_scan_start(struct ieee80211_sub_if_data *sdata, struct cfg80211_sched_scan_request *req) { struct ieee80211_local *local = sdata->local; - struct ieee80211_sched_scan_ies sched_scan_ies; + struct ieee80211_sched_scan_ies sched_scan_ies = {}; int ret, i; mutex_lock(&local->mtx); diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 0a4e4c04db8..d2eb64e1235 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -117,8 +117,8 @@ static void free_sta_work(struct work_struct *wk) for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { local->total_ps_buffered -= skb_queue_len(&sta->ps_tx_buf[ac]); - __skb_queue_purge(&sta->ps_tx_buf[ac]); - __skb_queue_purge(&sta->tx_filtered[ac]); + ieee80211_purge_tx_queue(&local->hw, &sta->ps_tx_buf[ac]); + ieee80211_purge_tx_queue(&local->hw, &sta->tx_filtered[ac]); } #ifdef CONFIG_MAC80211_MESH @@ -141,7 +141,7 @@ static void free_sta_work(struct work_struct *wk) tid_tx = rcu_dereference_raw(sta->ampdu_mlme.tid_tx[i]); if (!tid_tx) continue; - __skb_queue_purge(&tid_tx->pending); + ieee80211_purge_tx_queue(&local->hw, &tid_tx->pending); kfree(tid_tx); } @@ -961,6 +961,7 @@ void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta) struct ieee80211_local *local = sdata->local; struct sk_buff_head pending; int filtered = 0, buffered = 0, ac; + unsigned long flags; clear_sta_flag(sta, WLAN_STA_SP); @@ -976,12 +977,16 @@ void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta) for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { int count = skb_queue_len(&pending), tmp; + spin_lock_irqsave(&sta->tx_filtered[ac].lock, flags); skb_queue_splice_tail_init(&sta->tx_filtered[ac], &pending); + spin_unlock_irqrestore(&sta->tx_filtered[ac].lock, flags); tmp = skb_queue_len(&pending); filtered += tmp - count; count = tmp; + spin_lock_irqsave(&sta->ps_tx_buf[ac].lock, flags); skb_queue_splice_tail_init(&sta->ps_tx_buf[ac], &pending); + spin_unlock_irqrestore(&sta->ps_tx_buf[ac].lock, flags); tmp = skb_queue_len(&pending); buffered += tmp - count; } diff --git a/net/mac80211/status.c b/net/mac80211/status.c index 3af0cc4130f..101eb88a2b7 100644 --- a/net/mac80211/status.c +++ b/net/mac80211/status.c @@ -668,3 +668,12 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb) dev_kfree_skb_any(skb); } EXPORT_SYMBOL(ieee80211_free_txskb); + +void ieee80211_purge_tx_queue(struct ieee80211_hw *hw, + struct sk_buff_head *skbs) +{ + struct sk_buff *skb; + + while ((skb = __skb_dequeue(skbs))) + ieee80211_free_txskb(hw, skb); +} diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index c9bf83f3665..b858ebe41fd 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1358,7 +1358,7 @@ static int invoke_tx_handlers(struct ieee80211_tx_data *tx) if (tx->skb) ieee80211_free_txskb(&tx->local->hw, tx->skb); else - __skb_queue_purge(&tx->skbs); + ieee80211_purge_tx_queue(&tx->local->hw, &tx->skbs); return -1; } else if (unlikely(res == TX_QUEUED)) { I802_DEBUG_INC(tx->local->tx_handlers_queued); @@ -2120,10 +2120,13 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb, */ void ieee80211_clear_tx_pending(struct ieee80211_local *local) { + struct sk_buff *skb; int i; - for (i = 0; i < local->hw.queues; i++) - skb_queue_purge(&local->pending[i]); + for (i = 0; i < local->hw.queues; i++) { + while ((skb = skb_dequeue(&local->pending[i])) != NULL) + ieee80211_free_txskb(&local->hw, skb); + } } /* diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 239391807ca..0151ae33c4c 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1491,6 +1491,8 @@ int ieee80211_reconfig(struct ieee80211_local *local) list_for_each_entry(sdata, &local->interfaces, list) { if (sdata->vif.type != NL80211_IFTYPE_STATION) continue; + if (!sdata->u.mgd.associated) + continue; ieee80211_send_nullfunc(local, sdata, 0); } diff --git a/net/sctp/proc.c b/net/sctp/proc.c index c3bea269faf..9966e7b1645 100644 --- a/net/sctp/proc.c +++ b/net/sctp/proc.c @@ -102,7 +102,7 @@ static const struct file_operations sctp_snmp_seq_fops = { .open = sctp_snmp_seq_open, .read = seq_read, .llseek = seq_lseek, - .release = single_release, + .release = single_release_net, }; /* Set up the proc fs entry for 'snmp' object. */ @@ -251,7 +251,7 @@ static const struct file_operations sctp_eps_seq_fops = { .open = sctp_eps_seq_open, .read = seq_read, .llseek = seq_lseek, - .release = seq_release, + .release = seq_release_net, }; /* Set up the proc fs entry for 'eps' object. */ @@ -372,7 +372,7 @@ static const struct file_operations sctp_assocs_seq_fops = { .open = sctp_assocs_seq_open, .read = seq_read, .llseek = seq_lseek, - .release = seq_release, + .release = seq_release_net, }; /* Set up the proc fs entry for 'assocs' object. */ @@ -517,7 +517,7 @@ static const struct file_operations sctp_remaddr_seq_fops = { .open = sctp_remaddr_seq_open, .read = seq_read, .llseek = seq_lseek, - .release = seq_release, + .release = seq_release_net, }; int __net_init sctp_remaddr_proc_init(struct net *net) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index bcc7d7ee5a5..b75756b05af 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -141,9 +141,8 @@ static const struct ieee80211_regdomain world_regdom = { .reg_rules = { /* IEEE 802.11b/g, channels 1..11 */ REG_RULE(2412-10, 2462+10, 40, 6, 20, 0), - /* IEEE 802.11b/g, channels 12..13. No HT40 - * channel fits here. */ - REG_RULE(2467-10, 2472+10, 20, 6, 20, + /* IEEE 802.11b/g, channels 12..13. */ + REG_RULE(2467-10, 2472+10, 40, 6, 20, NL80211_RRF_PASSIVE_SCAN | NL80211_RRF_NO_IBSS), /* IEEE 802.11 channel 14 - Only JP enables diff --git a/scripts/kconfig/expr.h b/scripts/kconfig/expr.h index bd2e0989555..cdd48600e02 100644 --- a/scripts/kconfig/expr.h +++ b/scripts/kconfig/expr.h @@ -12,7 +12,7 @@ extern "C" { #include <assert.h> #include <stdio.h> -#include <sys/queue.h> +#include "list.h" #ifndef __cplusplus #include <stdbool.h> #endif @@ -175,12 +175,11 @@ struct menu { #define MENU_ROOT 0x0002 struct jump_key { - CIRCLEQ_ENTRY(jump_key) entries; + struct list_head entries; size_t offset; struct menu *target; int index; }; -CIRCLEQ_HEAD(jk_head, jump_key); #define JUMP_NB 9 diff --git a/scripts/kconfig/list.h b/scripts/kconfig/list.h new file mode 100644 index 00000000000..0ae730be5f4 --- /dev/null +++ b/scripts/kconfig/list.h @@ -0,0 +1,91 @@ +#ifndef LIST_H +#define LIST_H + +/* + * Copied from include/linux/... + */ + +#undef offsetof +#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER) + +/** + * container_of - cast a member of a structure out to the containing structure + * @ptr: the pointer to the member. + * @type: the type of the container struct this is embedded in. + * @member: the name of the member within the struct. + * + */ +#define container_of(ptr, type, member) ({ \ + const typeof( ((type *)0)->member ) *__mptr = (ptr); \ + (type *)( (char *)__mptr - offsetof(type,member) );}) + + +struct list_head { + struct list_head *next, *prev; +}; + + +#define LIST_HEAD_INIT(name) { &(name), &(name) } + +#define LIST_HEAD(name) \ + struct list_head name = LIST_HEAD_INIT(name) + +/** + * list_entry - get the struct for this entry + * @ptr: the &struct list_head pointer. + * @type: the type of the struct this is embedded in. + * @member: the name of the list_struct within the struct. + */ +#define list_entry(ptr, type, member) \ + container_of(ptr, type, member) + +/** + * list_for_each_entry - iterate over list of given type + * @pos: the type * to use as a loop cursor. + * @head: the head for your list. + * @member: the name of the list_struct within the struct. + */ +#define list_for_each_entry(pos, head, member) \ + for (pos = list_entry((head)->next, typeof(*pos), member); \ + &pos->member != (head); \ + pos = list_entry(pos->member.next, typeof(*pos), member)) + +/** + * list_empty - tests whether a list is empty + * @head: the list to test. + */ +static inline int list_empty(const struct list_head *head) +{ + return head->next == head; +} + +/* + * Insert a new entry between two known consecutive entries. + * + * This is only for internal list manipulation where we know + * the prev/next entries already! + */ +static inline void __list_add(struct list_head *_new, + struct list_head *prev, + struct list_head *next) +{ + next->prev = _new; + _new->next = next; + _new->prev = prev; + prev->next = _new; +} + +/** + * list_add_tail - add a new entry + * @new: new entry to be added + * @head: list head to add it before + * + * Insert a new entry before the specified head. + * This is useful for implementing queues. + */ +static inline void list_add_tail(struct list_head *_new, struct list_head *head) +{ + __list_add(_new, head->prev, head); +} + +#endif diff --git a/scripts/kconfig/lkc_proto.h b/scripts/kconfig/lkc_proto.h index 1d1c08537f1..ef1a7381f95 100644 --- a/scripts/kconfig/lkc_proto.h +++ b/scripts/kconfig/lkc_proto.h @@ -21,9 +21,9 @@ P(menu_get_root_menu,struct menu *,(struct menu *menu)); P(menu_get_parent_menu,struct menu *,(struct menu *menu)); P(menu_has_help,bool,(struct menu *menu)); P(menu_get_help,const char *,(struct menu *menu)); -P(get_symbol_str, void, (struct gstr *r, struct symbol *sym, struct jk_head +P(get_symbol_str, void, (struct gstr *r, struct symbol *sym, struct list_head *head)); -P(get_relations_str, struct gstr, (struct symbol **sym_arr, struct jk_head +P(get_relations_str, struct gstr, (struct symbol **sym_arr, struct list_head *head)); P(menu_get_ext_help,void,(struct menu *menu, struct gstr *help)); diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c index 48f67448af7..53975cf8760 100644 --- a/scripts/kconfig/mconf.c +++ b/scripts/kconfig/mconf.c @@ -312,7 +312,7 @@ static void set_config_filename(const char *config_filename) struct search_data { - struct jk_head *head; + struct list_head *head; struct menu **targets; int *keys; }; @@ -323,7 +323,7 @@ static void update_text(char *buf, size_t start, size_t end, void *_data) struct jump_key *pos; int k = 0; - CIRCLEQ_FOREACH(pos, data->head, entries) { + list_for_each_entry(pos, data->head, entries) { if (pos->offset >= start && pos->offset < end) { char header[4]; @@ -375,7 +375,7 @@ again: sym_arr = sym_re_search(dialog_input); do { - struct jk_head head = CIRCLEQ_HEAD_INITIALIZER(head); + LIST_HEAD(head); struct menu *targets[JUMP_NB]; int keys[JUMP_NB + 1], i; struct search_data data = { diff --git a/scripts/kconfig/menu.c b/scripts/kconfig/menu.c index a3cade659f8..e98a05c8e50 100644 --- a/scripts/kconfig/menu.c +++ b/scripts/kconfig/menu.c @@ -508,7 +508,7 @@ const char *menu_get_help(struct menu *menu) } static void get_prompt_str(struct gstr *r, struct property *prop, - struct jk_head *head) + struct list_head *head) { int i, j; struct menu *submenu[8], *menu, *location = NULL; @@ -544,12 +544,13 @@ static void get_prompt_str(struct gstr *r, struct property *prop, } else jump->target = location; - if (CIRCLEQ_EMPTY(head)) + if (list_empty(head)) jump->index = 0; else - jump->index = CIRCLEQ_LAST(head)->index + 1; + jump->index = list_entry(head->prev, struct jump_key, + entries)->index + 1; - CIRCLEQ_INSERT_TAIL(head, jump, entries); + list_add_tail(&jump->entries, head); } if (i > 0) { @@ -573,7 +574,8 @@ static void get_prompt_str(struct gstr *r, struct property *prop, /* * head is optional and may be NULL */ -void get_symbol_str(struct gstr *r, struct symbol *sym, struct jk_head *head) +void get_symbol_str(struct gstr *r, struct symbol *sym, + struct list_head *head) { bool hit; struct property *prop; @@ -612,7 +614,7 @@ void get_symbol_str(struct gstr *r, struct symbol *sym, struct jk_head *head) str_append(r, "\n\n"); } -struct gstr get_relations_str(struct symbol **sym_arr, struct jk_head *head) +struct gstr get_relations_str(struct symbol **sym_arr, struct list_head *head) { struct symbol *sym; struct gstr res = str_new(); diff --git a/security/device_cgroup.c b/security/device_cgroup.c index 842c254396d..b08d20c66c2 100644 --- a/security/device_cgroup.c +++ b/security/device_cgroup.c @@ -164,8 +164,8 @@ static void dev_exception_clean(struct dev_cgroup *dev_cgroup) struct dev_exception_item *ex, *tmp; list_for_each_entry_safe(ex, tmp, &dev_cgroup->exceptions, list) { - list_del(&ex->list); - kfree(ex); + list_del_rcu(&ex->list); + kfree_rcu(ex, rcu); } } @@ -298,7 +298,7 @@ static int may_access(struct dev_cgroup *dev_cgroup, struct dev_exception_item *ex; bool match = false; - list_for_each_entry(ex, &dev_cgroup->exceptions, list) { + list_for_each_entry_rcu(ex, &dev_cgroup->exceptions, list) { if ((refex->type & DEV_BLOCK) && !(ex->type & DEV_BLOCK)) continue; if ((refex->type & DEV_CHAR) && !(ex->type & DEV_CHAR)) @@ -352,6 +352,8 @@ static int parent_has_perm(struct dev_cgroup *childcg, */ static inline int may_allow_all(struct dev_cgroup *parent) { + if (!parent) + return 1; return parent->behavior == DEVCG_DEFAULT_ALLOW; } @@ -376,11 +378,14 @@ static int devcgroup_update_access(struct dev_cgroup *devcgroup, int count, rc; struct dev_exception_item ex; struct cgroup *p = devcgroup->css.cgroup; - struct dev_cgroup *parent = cgroup_to_devcgroup(p->parent); + struct dev_cgroup *parent = NULL; if (!capable(CAP_SYS_ADMIN)) return -EPERM; + if (p->parent) + parent = cgroup_to_devcgroup(p->parent); + memset(&ex, 0, sizeof(ex)); b = buffer; @@ -391,11 +396,14 @@ static int devcgroup_update_access(struct dev_cgroup *devcgroup, if (!may_allow_all(parent)) return -EPERM; dev_exception_clean(devcgroup); + devcgroup->behavior = DEVCG_DEFAULT_ALLOW; + if (!parent) + break; + rc = dev_exceptions_copy(&devcgroup->exceptions, &parent->exceptions); if (rc) return rc; - devcgroup->behavior = DEVCG_DEFAULT_ALLOW; break; case DEVCG_DENY: dev_exception_clean(devcgroup); diff --git a/sound/pci/es1968.c b/sound/pci/es1968.c index 50169bcfd90..7266020c16c 100644 --- a/sound/pci/es1968.c +++ b/sound/pci/es1968.c @@ -2581,9 +2581,14 @@ static u8 snd_es1968_tea575x_get_pins(struct snd_tea575x *tea) struct es1968 *chip = tea->private_data; unsigned long io = chip->io_port + GPIO_DATA; u16 val = inw(io); - - return (val & STR_DATA) ? TEA575X_DATA : 0 | - (val & STR_MOST) ? TEA575X_MOST : 0; + u8 ret; + + ret = 0; + if (val & STR_DATA) + ret |= TEA575X_DATA; + if (val & STR_MOST) + ret |= TEA575X_MOST; + return ret; } static void snd_es1968_tea575x_set_direction(struct snd_tea575x *tea, bool output) diff --git a/sound/pci/fm801.c b/sound/pci/fm801.c index cc2e91d1553..c5806f89be1 100644 --- a/sound/pci/fm801.c +++ b/sound/pci/fm801.c @@ -767,9 +767,14 @@ static u8 snd_fm801_tea575x_get_pins(struct snd_tea575x *tea) struct fm801 *chip = tea->private_data; unsigned short reg = inw(FM801_REG(chip, GPIO_CTRL)); struct snd_fm801_tea575x_gpio gpio = *get_tea575x_gpio(chip); - - return (reg & FM801_GPIO_GP(gpio.data)) ? TEA575X_DATA : 0 | - (reg & FM801_GPIO_GP(gpio.most)) ? TEA575X_MOST : 0; + u8 ret; + + ret = 0; + if (reg & FM801_GPIO_GP(gpio.data)) + ret |= TEA575X_DATA; + if (reg & FM801_GPIO_GP(gpio.most)) + ret |= TEA575X_MOST; + return ret; } static void snd_fm801_tea575x_set_direction(struct snd_tea575x *tea, bool output) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index c0ce3b1f04b..68fd49294b2 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5407,6 +5407,7 @@ static const struct snd_pci_quirk alc882_fixup_tbl[] = { SND_PCI_QUIRK(0x106b, 0x4000, "MacbookPro 5,1", ALC889_FIXUP_IMAC91_VREF), SND_PCI_QUIRK(0x106b, 0x4100, "Macmini 3,1", ALC889_FIXUP_IMAC91_VREF), SND_PCI_QUIRK(0x106b, 0x4200, "Mac Pro 5,1", ALC885_FIXUP_MACPRO_GPIO), + SND_PCI_QUIRK(0x106b, 0x4300, "iMac 9,1", ALC889_FIXUP_IMAC91_VREF), SND_PCI_QUIRK(0x106b, 0x4600, "MacbookPro 5,2", ALC889_FIXUP_IMAC91_VREF), SND_PCI_QUIRK(0x106b, 0x4900, "iMac 9,1 Aluminum", ALC889_FIXUP_IMAC91_VREF), SND_PCI_QUIRK(0x106b, 0x4a00, "Macbook 5,2", ALC889_FIXUP_IMAC91_VREF), diff --git a/sound/soc/codecs/cs42l52.c b/sound/soc/codecs/cs42l52.c index 4d8db3685e9..97a81051e88 100644 --- a/sound/soc/codecs/cs42l52.c +++ b/sound/soc/codecs/cs42l52.c @@ -773,7 +773,6 @@ static int cs42l52_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) { struct snd_soc_codec *codec = codec_dai->codec; struct cs42l52_private *cs42l52 = snd_soc_codec_get_drvdata(codec); - int ret = 0; u8 iface = 0; switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { @@ -822,7 +821,7 @@ static int cs42l52_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) case SND_SOC_DAIFMT_NB_IF: break; default: - ret = -EINVAL; + return -EINVAL; } cs42l52->config.format = iface; snd_soc_write(codec, CS42L52_IFACE_CTL1, cs42l52->config.format); diff --git a/sound/soc/codecs/wm5102.c b/sound/soc/codecs/wm5102.c index 1722b586bdb..7394e73fa43 100644 --- a/sound/soc/codecs/wm5102.c +++ b/sound/soc/codecs/wm5102.c @@ -42,6 +42,556 @@ static DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0); static DECLARE_TLV_DB_SCALE(digital_tlv, -6400, 50, 0); static DECLARE_TLV_DB_SCALE(noise_tlv, 0, 600, 0); +static const struct reg_default wm5102_sysclk_reva_patch[] = { + { 0x3000, 0x2225 }, + { 0x3001, 0x3a03 }, + { 0x3002, 0x0225 }, + { 0x3003, 0x0801 }, + { 0x3004, 0x6249 }, + { 0x3005, 0x0c04 }, + { 0x3006, 0x0225 }, + { 0x3007, 0x5901 }, + { 0x3008, 0xe249 }, + { 0x3009, 0x030d }, + { 0x300a, 0x0249 }, + { 0x300b, 0x2c01 }, + { 0x300c, 0xe249 }, + { 0x300d, 0x4342 }, + { 0x300e, 0xe249 }, + { 0x300f, 0x73c0 }, + { 0x3010, 0x4249 }, + { 0x3011, 0x0c00 }, + { 0x3012, 0x0225 }, + { 0x3013, 0x1f01 }, + { 0x3014, 0x0225 }, + { 0x3015, 0x1e01 }, + { 0x3016, 0x0225 }, + { 0x3017, 0xfa00 }, + { 0x3018, 0x0000 }, + { 0x3019, 0xf000 }, + { 0x301a, 0x0000 }, + { 0x301b, 0xf000 }, + { 0x301c, 0x0000 }, + { 0x301d, 0xf000 }, + { 0x301e, 0x0000 }, + { 0x301f, 0xf000 }, + { 0x3020, 0x0000 }, + { 0x3021, 0xf000 }, + { 0x3022, 0x0000 }, + { 0x3023, 0xf000 }, + { 0x3024, 0x0000 }, + { 0x3025, 0xf000 }, + { 0x3026, 0x0000 }, + { 0x3027, 0xf000 }, + { 0x3028, 0x0000 }, + { 0x3029, 0xf000 }, + { 0x302a, 0x0000 }, + { 0x302b, 0xf000 }, + { 0x302c, 0x0000 }, + { 0x302d, 0xf000 }, + { 0x302e, 0x0000 }, + { 0x302f, 0xf000 }, + { 0x3030, 0x0225 }, + { 0x3031, 0x1a01 }, + { 0x3032, 0x0225 }, + { 0x3033, 0x1e00 }, + { 0x3034, 0x0225 }, + { 0x3035, 0x1f00 }, + { 0x3036, 0x6225 }, + { 0x3037, 0xf800 }, + { 0x3038, 0x0000 }, + { 0x3039, 0xf000 }, + { 0x303a, 0x0000 }, + { 0x303b, 0xf000 }, + { 0x303c, 0x0000 }, + { 0x303d, 0xf000 }, + { 0x303e, 0x0000 }, + { 0x303f, 0xf000 }, + { 0x3040, 0x2226 }, + { 0x3041, 0x3a03 }, + { 0x3042, 0x0226 }, + { 0x3043, 0x0801 }, + { 0x3044, 0x6249 }, + { 0x3045, 0x0c06 }, + { 0x3046, 0x0226 }, + { 0x3047, 0x5901 }, + { 0x3048, 0xe249 }, + { 0x3049, 0x030d }, + { 0x304a, 0x0249 }, + { 0x304b, 0x2c01 }, + { 0x304c, 0xe249 }, + { 0x304d, 0x4342 }, + { 0x304e, 0xe249 }, + { 0x304f, 0x73c0 }, + { 0x3050, 0x4249 }, + { 0x3051, 0x0c00 }, + { 0x3052, 0x0226 }, + { 0x3053, 0x1f01 }, + { 0x3054, 0x0226 }, + { 0x3055, 0x1e01 }, + { 0x3056, 0x0226 }, + { 0x3057, 0xfa00 }, + { 0x3058, 0x0000 }, + { 0x3059, 0xf000 }, + { 0x305a, 0x0000 }, + { 0x305b, 0xf000 }, + { 0x305c, 0x0000 }, + { 0x305d, 0xf000 }, + { 0x305e, 0x0000 }, + { 0x305f, 0xf000 }, + { 0x3060, 0x0000 }, + { 0x3061, 0xf000 }, + { 0x3062, 0x0000 }, + { 0x3063, 0xf000 }, + { 0x3064, 0x0000 }, + { 0x3065, 0xf000 }, + { 0x3066, 0x0000 }, + { 0x3067, 0xf000 }, + { 0x3068, 0x0000 }, + { 0x3069, 0xf000 }, + { 0x306a, 0x0000 }, + { 0x306b, 0xf000 }, + { 0x306c, 0x0000 }, + { 0x306d, 0xf000 }, + { 0x306e, 0x0000 }, + { 0x306f, 0xf000 }, + { 0x3070, 0x0226 }, + { 0x3071, 0x1a01 }, + { 0x3072, 0x0226 }, + { 0x3073, 0x1e00 }, + { 0x3074, 0x0226 }, + { 0x3075, 0x1f00 }, + { 0x3076, 0x6226 }, + { 0x3077, 0xf800 }, + { 0x3078, 0x0000 }, + { 0x3079, 0xf000 }, + { 0x307a, 0x0000 }, + { 0x307b, 0xf000 }, + { 0x307c, 0x0000 }, + { 0x307d, 0xf000 }, + { 0x307e, 0x0000 }, + { 0x307f, 0xf000 }, + { 0x3080, 0x2227 }, + { 0x3081, 0x3a03 }, + { 0x3082, 0x0227 }, + { 0x3083, 0x0801 }, + { 0x3084, 0x6255 }, + { 0x3085, 0x0c04 }, + { 0x3086, 0x0227 }, + { 0x3087, 0x5901 }, + { 0x3088, 0xe255 }, + { 0x3089, 0x030d }, + { 0x308a, 0x0255 }, + { 0x308b, 0x2c01 }, + { 0x308c, 0xe255 }, + { 0x308d, 0x4342 }, + { 0x308e, 0xe255 }, + { 0x308f, 0x73c0 }, + { 0x3090, 0x4255 }, + { 0x3091, 0x0c00 }, + { 0x3092, 0x0227 }, + { 0x3093, 0x1f01 }, + { 0x3094, 0x0227 }, + { 0x3095, 0x1e01 }, + { 0x3096, 0x0227 }, + { 0x3097, 0xfa00 }, + { 0x3098, 0x0000 }, + { 0x3099, 0xf000 }, + { 0x309a, 0x0000 }, + { 0x309b, 0xf000 }, + { 0x309c, 0x0000 }, + { 0x309d, 0xf000 }, + { 0x309e, 0x0000 }, + { 0x309f, 0xf000 }, + { 0x30a0, 0x0000 }, + { 0x30a1, 0xf000 }, + { 0x30a2, 0x0000 }, + { 0x30a3, 0xf000 }, + { 0x30a4, 0x0000 }, + { 0x30a5, 0xf000 }, + { 0x30a6, 0x0000 }, + { 0x30a7, 0xf000 }, + { 0x30a8, 0x0000 }, + { 0x30a9, 0xf000 }, + { 0x30aa, 0x0000 }, + { 0x30ab, 0xf000 }, + { 0x30ac, 0x0000 }, + { 0x30ad, 0xf000 }, + { 0x30ae, 0x0000 }, + { 0x30af, 0xf000 }, + { 0x30b0, 0x0227 }, + { 0x30b1, 0x1a01 }, + { 0x30b2, 0x0227 }, + { 0x30b3, 0x1e00 }, + { 0x30b4, 0x0227 }, + { 0x30b5, 0x1f00 }, + { 0x30b6, 0x6227 }, + { 0x30b7, 0xf800 }, + { 0x30b8, 0x0000 }, + { 0x30b9, 0xf000 }, + { 0x30ba, 0x0000 }, + { 0x30bb, 0xf000 }, + { 0x30bc, 0x0000 }, + { 0x30bd, 0xf000 }, + { 0x30be, 0x0000 }, + { 0x30bf, 0xf000 }, + { 0x30c0, 0x2228 }, + { 0x30c1, 0x3a03 }, + { 0x30c2, 0x0228 }, + { 0x30c3, 0x0801 }, + { 0x30c4, 0x6255 }, + { 0x30c5, 0x0c06 }, + { 0x30c6, 0x0228 }, + { 0x30c7, 0x5901 }, + { 0x30c8, 0xe255 }, + { 0x30c9, 0x030d }, + { 0x30ca, 0x0255 }, + { 0x30cb, 0x2c01 }, + { 0x30cc, 0xe255 }, + { 0x30cd, 0x4342 }, + { 0x30ce, 0xe255 }, + { 0x30cf, 0x73c0 }, + { 0x30d0, 0x4255 }, + { 0x30d1, 0x0c00 }, + { 0x30d2, 0x0228 }, + { 0x30d3, 0x1f01 }, + { 0x30d4, 0x0228 }, + { 0x30d5, 0x1e01 }, + { 0x30d6, 0x0228 }, + { 0x30d7, 0xfa00 }, + { 0x30d8, 0x0000 }, + { 0x30d9, 0xf000 }, + { 0x30da, 0x0000 }, + { 0x30db, 0xf000 }, + { 0x30dc, 0x0000 }, + { 0x30dd, 0xf000 }, + { 0x30de, 0x0000 }, + { 0x30df, 0xf000 }, + { 0x30e0, 0x0000 }, + { 0x30e1, 0xf000 }, + { 0x30e2, 0x0000 }, + { 0x30e3, 0xf000 }, + { 0x30e4, 0x0000 }, + { 0x30e5, 0xf000 }, + { 0x30e6, 0x0000 }, + { 0x30e7, 0xf000 }, + { 0x30e8, 0x0000 }, + { 0x30e9, 0xf000 }, + { 0x30ea, 0x0000 }, + { 0x30eb, 0xf000 }, + { 0x30ec, 0x0000 }, + { 0x30ed, 0xf000 }, + { 0x30ee, 0x0000 }, + { 0x30ef, 0xf000 }, + { 0x30f0, 0x0228 }, + { 0x30f1, 0x1a01 }, + { 0x30f2, 0x0228 }, + { 0x30f3, 0x1e00 }, + { 0x30f4, 0x0228 }, + { 0x30f5, 0x1f00 }, + { 0x30f6, 0x6228 }, + { 0x30f7, 0xf800 }, + { 0x30f8, 0x0000 }, + { 0x30f9, 0xf000 }, + { 0x30fa, 0x0000 }, + { 0x30fb, 0xf000 }, + { 0x30fc, 0x0000 }, + { 0x30fd, 0xf000 }, + { 0x30fe, 0x0000 }, + { 0x30ff, 0xf000 }, + { 0x3100, 0x222b }, + { 0x3101, 0x3a03 }, + { 0x3102, 0x222b }, + { 0x3103, 0x5803 }, + { 0x3104, 0xe26f }, + { 0x3105, 0x030d }, + { 0x3106, 0x626f }, + { 0x3107, 0x2c01 }, + { 0x3108, 0xe26f }, + { 0x3109, 0x4342 }, + { 0x310a, 0xe26f }, + { 0x310b, 0x73c0 }, + { 0x310c, 0x026f }, + { 0x310d, 0x0c00 }, + { 0x310e, 0x022b }, + { 0x310f, 0x1f01 }, + { 0x3110, 0x022b }, + { 0x3111, 0x1e01 }, + { 0x3112, 0x022b }, + { 0x3113, 0xfa00 }, + { 0x3114, 0x0000 }, + { 0x3115, 0xf000 }, + { 0x3116, 0x0000 }, + { 0x3117, 0xf000 }, + { 0x3118, 0x0000 }, + { 0x3119, 0xf000 }, + { 0x311a, 0x0000 }, + { 0x311b, 0xf000 }, + { 0x311c, 0x0000 }, + { 0x311d, 0xf000 }, + { 0x311e, 0x0000 }, + { 0x311f, 0xf000 }, + { 0x3120, 0x022b }, + { 0x3121, 0x0a01 }, + { 0x3122, 0x022b }, + { 0x3123, 0x1e00 }, + { 0x3124, 0x022b }, + { 0x3125, 0x1f00 }, + { 0x3126, 0x622b }, + { 0x3127, 0xf800 }, + { 0x3128, 0x0000 }, + { 0x3129, 0xf000 }, + { 0x312a, 0x0000 }, + { 0x312b, 0xf000 }, + { 0x312c, 0x0000 }, + { 0x312d, 0xf000 }, + { 0x312e, 0x0000 }, + { 0x312f, 0xf000 }, + { 0x3130, 0x0000 }, + { 0x3131, 0xf000 }, + { 0x3132, 0x0000 }, + { 0x3133, 0xf000 }, + { 0x3134, 0x0000 }, + { 0x3135, 0xf000 }, + { 0x3136, 0x0000 }, + { 0x3137, 0xf000 }, + { 0x3138, 0x0000 }, + { 0x3139, 0xf000 }, + { 0x313a, 0x0000 }, + { 0x313b, 0xf000 }, + { 0x313c, 0x0000 }, + { 0x313d, 0xf000 }, + { 0x313e, 0x0000 }, + { 0x313f, 0xf000 }, + { 0x3140, 0x0000 }, + { 0x3141, 0xf000 }, + { 0x3142, 0x0000 }, + { 0x3143, 0xf000 }, + { 0x3144, 0x0000 }, + { 0x3145, 0xf000 }, + { 0x3146, 0x0000 }, + { 0x3147, 0xf000 }, + { 0x3148, 0x0000 }, + { 0x3149, 0xf000 }, + { 0x314a, 0x0000 }, + { 0x314b, 0xf000 }, + { 0x314c, 0x0000 }, + { 0x314d, 0xf000 }, + { 0x314e, 0x0000 }, + { 0x314f, 0xf000 }, + { 0x3150, 0x0000 }, + { 0x3151, 0xf000 }, + { 0x3152, 0x0000 }, + { 0x3153, 0xf000 }, + { 0x3154, 0x0000 }, + { 0x3155, 0xf000 }, + { 0x3156, 0x0000 }, + { 0x3157, 0xf000 }, + { 0x3158, 0x0000 }, + { 0x3159, 0xf000 }, + { 0x315a, 0x0000 }, + { 0x315b, 0xf000 }, + { 0x315c, 0x0000 }, + { 0x315d, 0xf000 }, + { 0x315e, 0x0000 }, + { 0x315f, 0xf000 }, + { 0x3160, 0x0000 }, + { 0x3161, 0xf000 }, + { 0x3162, 0x0000 }, + { 0x3163, 0xf000 }, + { 0x3164, 0x0000 }, + { 0x3165, 0xf000 }, + { 0x3166, 0x0000 }, + { 0x3167, 0xf000 }, + { 0x3168, 0x0000 }, + { 0x3169, 0xf000 }, + { 0x316a, 0x0000 }, + { 0x316b, 0xf000 }, + { 0x316c, 0x0000 }, + { 0x316d, 0xf000 }, + { 0x316e, 0x0000 }, + { 0x316f, 0xf000 }, + { 0x3170, 0x0000 }, + { 0x3171, 0xf000 }, + { 0x3172, 0x0000 }, + { 0x3173, 0xf000 }, + { 0x3174, 0x0000 }, + { 0x3175, 0xf000 }, + { 0x3176, 0x0000 }, + { 0x3177, 0xf000 }, + { 0x3178, 0x0000 }, + { 0x3179, 0xf000 }, + { 0x317a, 0x0000 }, + { 0x317b, 0xf000 }, + { 0x317c, 0x0000 }, + { 0x317d, 0xf000 }, + { 0x317e, 0x0000 }, + { 0x317f, 0xf000 }, + { 0x3180, 0x2001 }, + { 0x3181, 0xf101 }, + { 0x3182, 0x0000 }, + { 0x3183, 0xf000 }, + { 0x3184, 0x0000 }, + { 0x3185, 0xf000 }, + { 0x3186, 0x0000 }, + { 0x3187, 0xf000 }, + { 0x3188, 0x0000 }, + { 0x3189, 0xf000 }, + { 0x318a, 0x0000 }, + { 0x318b, 0xf000 }, + { 0x318c, 0x0000 }, + { 0x318d, 0xf000 }, + { 0x318e, 0x0000 }, + { 0x318f, 0xf000 }, + { 0x3190, 0x0000 }, + { 0x3191, 0xf000 }, + { 0x3192, 0x0000 }, + { 0x3193, 0xf000 }, + { 0x3194, 0x0000 }, + { 0x3195, 0xf000 }, + { 0x3196, 0x0000 }, + { 0x3197, 0xf000 }, + { 0x3198, 0x0000 }, + { 0x3199, 0xf000 }, + { 0x319a, 0x0000 }, + { 0x319b, 0xf000 }, + { 0x319c, 0x0000 }, + { 0x319d, 0xf000 }, + { 0x319e, 0x0000 }, + { 0x319f, 0xf000 }, + { 0x31a0, 0x0000 }, + { 0x31a1, 0xf000 }, + { 0x31a2, 0x0000 }, + { 0x31a3, 0xf000 }, + { 0x31a4, 0x0000 }, + { 0x31a5, 0xf000 }, + { 0x31a6, 0x0000 }, + { 0x31a7, 0xf000 }, + { 0x31a8, 0x0000 }, + { 0x31a9, 0xf000 }, + { 0x31aa, 0x0000 }, + { 0x31ab, 0xf000 }, + { 0x31ac, 0x0000 }, + { 0x31ad, 0xf000 }, + { 0x31ae, 0x0000 }, + { 0x31af, 0xf000 }, + { 0x31b0, 0x0000 }, + { 0x31b1, 0xf000 }, + { 0x31b2, 0x0000 }, + { 0x31b3, 0xf000 }, + { 0x31b4, 0x0000 }, + { 0x31b5, 0xf000 }, + { 0x31b6, 0x0000 }, + { 0x31b7, 0xf000 }, + { 0x31b8, 0x0000 }, + { 0x31b9, 0xf000 }, + { 0x31ba, 0x0000 }, + { 0x31bb, 0xf000 }, + { 0x31bc, 0x0000 }, + { 0x31bd, 0xf000 }, + { 0x31be, 0x0000 }, + { 0x31bf, 0xf000 }, + { 0x31c0, 0x0000 }, + { 0x31c1, 0xf000 }, + { 0x31c2, 0x0000 }, + { 0x31c3, 0xf000 }, + { 0x31c4, 0x0000 }, + { 0x31c5, 0xf000 }, + { 0x31c6, 0x0000 }, + { 0x31c7, 0xf000 }, + { 0x31c8, 0x0000 }, + { 0x31c9, 0xf000 }, + { 0x31ca, 0x0000 }, + { 0x31cb, 0xf000 }, + { 0x31cc, 0x0000 }, + { 0x31cd, 0xf000 }, + { 0x31ce, 0x0000 }, + { 0x31cf, 0xf000 }, + { 0x31d0, 0x0000 }, + { 0x31d1, 0xf000 }, + { 0x31d2, 0x0000 }, + { 0x31d3, 0xf000 }, + { 0x31d4, 0x0000 }, + { 0x31d5, 0xf000 }, + { 0x31d6, 0x0000 }, + { 0x31d7, 0xf000 }, + { 0x31d8, 0x0000 }, + { 0x31d9, 0xf000 }, + { 0x31da, 0x0000 }, + { 0x31db, 0xf000 }, + { 0x31dc, 0x0000 }, + { 0x31dd, 0xf000 }, + { 0x31de, 0x0000 }, + { 0x31df, 0xf000 }, + { 0x31e0, 0x0000 }, + { 0x31e1, 0xf000 }, + { 0x31e2, 0x0000 }, + { 0x31e3, 0xf000 }, + { 0x31e4, 0x0000 }, + { 0x31e5, 0xf000 }, + { 0x31e6, 0x0000 }, + { 0x31e7, 0xf000 }, + { 0x31e8, 0x0000 }, + { 0x31e9, 0xf000 }, + { 0x31ea, 0x0000 }, + { 0x31eb, 0xf000 }, + { 0x31ec, 0x0000 }, + { 0x31ed, 0xf000 }, + { 0x31ee, 0x0000 }, + { 0x31ef, 0xf000 }, + { 0x31f0, 0x0000 }, + { 0x31f1, 0xf000 }, + { 0x31f2, 0x0000 }, + { 0x31f3, 0xf000 }, + { 0x31f4, 0x0000 }, + { 0x31f5, 0xf000 }, + { 0x31f6, 0x0000 }, + { 0x31f7, 0xf000 }, + { 0x31f8, 0x0000 }, + { 0x31f9, 0xf000 }, + { 0x31fa, 0x0000 }, + { 0x31fb, 0xf000 }, + { 0x31fc, 0x0000 }, + { 0x31fd, 0xf000 }, + { 0x31fe, 0x0000 }, + { 0x31ff, 0xf000 }, + { 0x024d, 0xff50 }, + { 0x0252, 0xff50 }, + { 0x0259, 0x0112 }, + { 0x025e, 0x0112 }, +}; + +static int wm5102_sysclk_ev(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + struct arizona *arizona = dev_get_drvdata(codec->dev); + struct regmap *regmap = codec->control_data; + const struct reg_default *patch = NULL; + int i, patch_size; + + switch (arizona->rev) { + case 0: + patch = wm5102_sysclk_reva_patch; + patch_size = ARRAY_SIZE(wm5102_sysclk_reva_patch); + break; + } + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + if (patch) + for (i = 0; i < patch_size; i++) + regmap_write(regmap, patch[i].reg, + patch[i].def); + break; + + default: + break; + } + + return 0; +} + static const struct snd_kcontrol_new wm5102_snd_controls[] = { SOC_SINGLE("IN1 High Performance Switch", ARIZONA_IN1L_CONTROL, ARIZONA_IN1_OSR_SHIFT, 1, 0), @@ -297,7 +847,7 @@ static const struct snd_kcontrol_new wm5102_aec_loopback_mux = static const struct snd_soc_dapm_widget wm5102_dapm_widgets[] = { SND_SOC_DAPM_SUPPLY("SYSCLK", ARIZONA_SYSTEM_CLOCK_1, ARIZONA_SYSCLK_ENA_SHIFT, - 0, NULL, 0), + 0, wm5102_sysclk_ev, SND_SOC_DAPM_POST_PMU), SND_SOC_DAPM_SUPPLY("ASYNCCLK", ARIZONA_ASYNC_CLOCK_1, ARIZONA_ASYNC_CLK_ENA_SHIFT, 0, NULL, 0), SND_SOC_DAPM_SUPPLY("OPCLK", ARIZONA_OUTPUT_SYSTEM_CLOCK, diff --git a/sound/soc/codecs/wm8978.c b/sound/soc/codecs/wm8978.c index 5421fd9fbcb..4c0a8e49613 100644 --- a/sound/soc/codecs/wm8978.c +++ b/sound/soc/codecs/wm8978.c @@ -782,7 +782,7 @@ static int wm8978_hw_params(struct snd_pcm_substream *substream, wm8978->mclk_idx = -1; f_sel = wm8978->f_mclk; } else { - if (!wm8978->f_pllout) { + if (!wm8978->f_opclk) { /* We only enter here, if OPCLK is not used */ int ret = wm8978_configure_pll(codec); if (ret < 0) diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c index aa037b292f3..c294fbb523f 100644 --- a/sound/soc/mxs/mxs-saif.c +++ b/sound/soc/mxs/mxs-saif.c @@ -523,16 +523,24 @@ static int mxs_saif_trigger(struct snd_pcm_substream *substream, int cmd, if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { /* - * write a data to saif data register to trigger - * the transfer + * write data to saif data register to trigger + * the transfer. + * For 24-bit format the 32-bit FIFO register stores + * only one channel, so we need to write twice. + * This is also safe for the other non 24-bit formats. */ __raw_writel(0, saif->base + SAIF_DATA); + __raw_writel(0, saif->base + SAIF_DATA); } else { /* - * read a data from saif data register to trigger - * the receive + * read data from saif data register to trigger + * the receive. + * For 24-bit format the 32-bit FIFO register stores + * only one channel, so we need to read twice. + * This is also safe for the other non 24-bit formats. */ __raw_readl(saif->base + SAIF_DATA); + __raw_readl(saif->base + SAIF_DATA); } master_saif->ongoing = 1; @@ -812,3 +820,4 @@ module_platform_driver(mxs_saif_driver); MODULE_AUTHOR("Freescale Semiconductor, Inc."); MODULE_DESCRIPTION("MXS ASoC SAIF driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:mxs-saif"); diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig index e7b83179aca..3c7c3a59ed3 100644 --- a/sound/soc/samsung/Kconfig +++ b/sound/soc/samsung/Kconfig @@ -207,6 +207,8 @@ config SND_SOC_BELLS select SND_SOC_WM5102 select SND_SOC_WM5110 select SND_SOC_WM9081 + select SND_SOC_WM0010 + select SND_SOC_WM1250_EV1 config SND_SOC_LOWLAND tristate "Audio support for Wolfson Lowland" diff --git a/sound/soc/samsung/bells.c b/sound/soc/samsung/bells.c index b0d46d63d55..b56b9a3c616 100644 --- a/sound/soc/samsung/bells.c +++ b/sound/soc/samsung/bells.c @@ -247,7 +247,7 @@ static struct snd_soc_dai_link bells_dai_wm5110[] = { { .name = "Sub", .stream_name = "Sub", - .cpu_dai_name = "wm5110-aif3", + .cpu_dai_name = "wm5102-aif3", .codec_dai_name = "wm9081-hifi", .codec_name = "wm9081.1-006c", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index d1198627fc4..10d21be383f 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -2786,8 +2786,9 @@ int snd_soc_put_volsw_sx(struct snd_kcontrol *kcontrol, val = (ucontrol->value.integer.value[0] + min) & mask; val = val << shift; - if (snd_soc_update_bits_locked(codec, reg, val_mask, val)) - return err; + err = snd_soc_update_bits_locked(codec, reg, val_mask, val); + if (err < 0) + return err; if (snd_soc_volsw_is_stereo(mc)) { val_mask = mask << rshift; diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index d0a4be38dc0..6e35bcae02d 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -3745,7 +3745,7 @@ void snd_soc_dapm_shutdown(struct snd_soc_card *card) { struct snd_soc_codec *codec; - list_for_each_entry(codec, &card->codec_dev_list, list) { + list_for_each_entry(codec, &card->codec_dev_list, card_list) { soc_dapm_shutdown_codec(&codec->dapm); if (codec->dapm.bias_level == SND_SOC_BIAS_STANDBY) snd_soc_dapm_set_bias_level(&codec->dapm, diff --git a/sound/usb/card.c b/sound/usb/card.c index 282f0fc9fed..dbf7999d18b 100644 --- a/sound/usb/card.c +++ b/sound/usb/card.c @@ -559,9 +559,11 @@ static void snd_usb_audio_disconnect(struct usb_device *dev, return; card = chip->card; - mutex_lock(®ister_mutex); down_write(&chip->shutdown_rwsem); chip->shutdown = 1; + up_write(&chip->shutdown_rwsem); + + mutex_lock(®ister_mutex); chip->num_interfaces--; if (chip->num_interfaces <= 0) { snd_card_disconnect(card); @@ -582,11 +584,9 @@ static void snd_usb_audio_disconnect(struct usb_device *dev, snd_usb_mixer_disconnect(p); } usb_chip[chip->index] = NULL; - up_write(&chip->shutdown_rwsem); mutex_unlock(®ister_mutex); snd_card_free_when_closed(card); } else { - up_write(&chip->shutdown_rwsem); mutex_unlock(®ister_mutex); } } diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 2655ae9a3ad..ea095abbe97 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -206,8 +206,10 @@ int get_msr(int cpu, off_t offset, unsigned long long *msr) retval = pread(fd, msr, sizeof *msr, offset); close(fd); - if (retval != sizeof *msr) + if (retval != sizeof *msr) { + fprintf(stderr, "%s offset 0x%zx read failed\n", pathname, offset); return -1; + } return 0; } @@ -1101,7 +1103,9 @@ void turbostat_loop() restart: retval = for_all_cpus(get_counters, EVEN_COUNTERS); - if (retval) { + if (retval < -1) { + exit(retval); + } else if (retval == -1) { re_initialize(); goto restart; } @@ -1114,7 +1118,9 @@ restart: } sleep(interval_sec); retval = for_all_cpus(get_counters, ODD_COUNTERS); - if (retval) { + if (retval < -1) { + exit(retval); + } else if (retval == -1) { re_initialize(); goto restart; } @@ -1126,7 +1132,9 @@ restart: flush_stdout(); sleep(interval_sec); retval = for_all_cpus(get_counters, EVEN_COUNTERS); - if (retval) { + if (retval < -1) { + exit(retval); + } else if (retval == -1) { re_initialize(); goto restart; } @@ -1545,8 +1553,11 @@ void turbostat_init() int fork_it(char **argv) { pid_t child_pid; + int status; - for_all_cpus(get_counters, EVEN_COUNTERS); + status = for_all_cpus(get_counters, EVEN_COUNTERS); + if (status) + exit(status); /* clear affinity side-effect of get_counters() */ sched_setaffinity(0, cpu_present_setsize, cpu_present_set); gettimeofday(&tv_even, (struct timezone *)NULL); @@ -1556,7 +1567,6 @@ int fork_it(char **argv) /* child */ execvp(argv[0], argv); } else { - int status; /* parent */ if (child_pid == -1) { @@ -1568,7 +1578,7 @@ int fork_it(char **argv) signal(SIGQUIT, SIG_IGN); if (waitpid(child_pid, &status, 0) == -1) { perror("wait"); - exit(1); + exit(status); } } /* @@ -1585,7 +1595,7 @@ int fork_it(char **argv) fprintf(stderr, "%.6f sec\n", tv_delta.tv_sec + tv_delta.tv_usec/1000000.0); - return 0; + return status; } void cmdline(int argc, char **argv) @@ -1594,7 +1604,7 @@ void cmdline(int argc, char **argv) progname = argv[0]; - while ((opt = getopt(argc, argv, "+pPSvisc:sC:m:M:")) != -1) { + while ((opt = getopt(argc, argv, "+pPSvi:sc:sC:m:M:")) != -1) { switch (opt) { case 'p': show_core_only++; |