summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/net/e1000/e1000_ethtool.c44
-rw-r--r--drivers/net/e1000/e1000_hw.c88
-rw-r--r--drivers/net/e1000/e1000_hw.h4
-rw-r--r--drivers/net/e1000/e1000_main.c26
4 files changed, 81 insertions, 81 deletions
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index e48dc578fde..cfdf0b24ffc 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -865,15 +865,15 @@ static int
e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data)
{
struct net_device *netdev = adapter->netdev;
- uint32_t mask, i=0, shared_int = TRUE;
- uint32_t irq = adapter->pdev->irq;
+ uint32_t mask, i=0, shared_int = TRUE;
+ uint32_t irq = adapter->pdev->irq;
*data = 0;
/* Hook up test interrupt handler just for this test */
- if (!request_irq(irq, &e1000_test_intr, 0, netdev->name, netdev)) {
- shared_int = FALSE;
- } else if (request_irq(irq, &e1000_test_intr, SA_SHIRQ,
+ if (!request_irq(irq, &e1000_test_intr, 0, netdev->name, netdev)) {
+ shared_int = FALSE;
+ } else if (request_irq(irq, &e1000_test_intr, SA_SHIRQ,
netdev->name, netdev)){
*data = 1;
return -1;
@@ -889,22 +889,22 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data)
/* Interrupt to test */
mask = 1 << i;
- if (!shared_int) {
- /* Disable the interrupt to be reported in
- * the cause register and then force the same
- * interrupt and see if one gets posted. If
- * an interrupt was posted to the bus, the
- * test failed.
- */
- adapter->test_icr = 0;
- E1000_WRITE_REG(&adapter->hw, IMC, mask);
- E1000_WRITE_REG(&adapter->hw, ICS, mask);
- msec_delay(10);
-
- if (adapter->test_icr & mask) {
- *data = 3;
- break;
- }
+ if (!shared_int) {
+ /* Disable the interrupt to be reported in
+ * the cause register and then force the same
+ * interrupt and see if one gets posted. If
+ * an interrupt was posted to the bus, the
+ * test failed.
+ */
+ adapter->test_icr = 0;
+ E1000_WRITE_REG(&adapter->hw, IMC, mask);
+ E1000_WRITE_REG(&adapter->hw, ICS, mask);
+ msec_delay(10);
+
+ if (adapter->test_icr & mask) {
+ *data = 3;
+ break;
+ }
}
/* Enable the interrupt to be reported in
@@ -923,7 +923,7 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data)
break;
}
- if (!shared_int) {
+ if (!shared_int) {
/* Disable the other interrupts to be reported in
* the cause register and then force the other
* interrupts and see if any get posted. If
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index 2e211df1698..3959039b16e 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -765,7 +765,7 @@ e1000_init_hw(struct e1000_hw *hw)
}
if (hw->mac_type == e1000_82573) {
- e1000_enable_tx_pkt_filtering(hw);
+ e1000_enable_tx_pkt_filtering(hw);
}
switch (hw->mac_type) {
@@ -861,7 +861,7 @@ e1000_adjust_serdes_amplitude(struct e1000_hw *hw)
if(eeprom_data != EEPROM_RESERVED_WORD) {
/* Adjust SERDES output amplitude only. */
- eeprom_data &= EEPROM_SERDES_AMPLITUDE_MASK;
+ eeprom_data &= EEPROM_SERDES_AMPLITUDE_MASK;
ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_EXT_CTRL, eeprom_data);
if(ret_val)
return ret_val;
@@ -1228,7 +1228,7 @@ e1000_copper_link_igp_setup(struct e1000_hw *hw)
if (hw->phy_reset_disable)
return E1000_SUCCESS;
-
+
ret_val = e1000_phy_reset(hw);
if (ret_val) {
DEBUGOUT("Error Resetting the PHY\n");
@@ -1370,7 +1370,7 @@ e1000_copper_link_ggp_setup(struct e1000_hw *hw)
DEBUGFUNC("e1000_copper_link_ggp_setup");
if(!hw->phy_reset_disable) {
-
+
/* Enable CRS on TX for half-duplex operation. */
ret_val = e1000_read_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL,
&phy_data);
@@ -1519,7 +1519,7 @@ e1000_copper_link_mgp_setup(struct e1000_hw *hw)
if(hw->phy_reset_disable)
return E1000_SUCCESS;
-
+
/* Enable CRS on TX. This must be set for half-duplex operation. */
ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
if(ret_val)
@@ -1665,7 +1665,7 @@ e1000_copper_link_autoneg(struct e1000_hw *hw)
* collision distance in the Transmit Control Register.
* 2) Set up flow control on the MAC to that established with
* the link partner.
-* 3) Config DSP to improve Gigabit link quality for some PHY revisions.
+* 3) Config DSP to improve Gigabit link quality for some PHY revisions.
*
* hw - Struct containing variables accessed by shared code
******************************************************************************/
@@ -1674,7 +1674,7 @@ e1000_copper_link_postconfig(struct e1000_hw *hw)
{
int32_t ret_val;
DEBUGFUNC("e1000_copper_link_postconfig");
-
+
if(hw->mac_type >= e1000_82544) {
e1000_config_collision_dist(hw);
} else {
@@ -1698,7 +1698,7 @@ e1000_copper_link_postconfig(struct e1000_hw *hw)
return ret_val;
}
}
-
+
return E1000_SUCCESS;
}
@@ -1754,11 +1754,11 @@ e1000_setup_copper_link(struct e1000_hw *hw)
}
if(hw->autoneg) {
- /* Setup autoneg and flow control advertisement
- * and perform autonegotiation */
+ /* Setup autoneg and flow control advertisement
+ * and perform autonegotiation */
ret_val = e1000_copper_link_autoneg(hw);
if(ret_val)
- return ret_val;
+ return ret_val;
} else {
/* PHY will be set to 10H, 10F, 100H,or 100F
* depending on value from forced_speed_duplex. */
@@ -1786,7 +1786,7 @@ e1000_setup_copper_link(struct e1000_hw *hw)
ret_val = e1000_copper_link_postconfig(hw);
if(ret_val)
return ret_val;
-
+
DEBUGOUT("Valid link established!!!\n");
return E1000_SUCCESS;
}
@@ -1984,7 +1984,7 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw)
DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
- ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
+ ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
if(ret_val)
return ret_val;
@@ -2273,7 +2273,7 @@ e1000_config_mac_to_phy(struct e1000_hw *hw)
DEBUGFUNC("e1000_config_mac_to_phy");
- /* 82544 or newer MAC, Auto Speed Detection takes care of
+ /* 82544 or newer MAC, Auto Speed Detection takes care of
* MAC speed/duplex configuration.*/
if (hw->mac_type >= e1000_82544)
return E1000_SUCCESS;
@@ -2292,9 +2292,9 @@ e1000_config_mac_to_phy(struct e1000_hw *hw)
if(ret_val)
return ret_val;
- if(phy_data & M88E1000_PSSR_DPLX)
+ if(phy_data & M88E1000_PSSR_DPLX)
ctrl |= E1000_CTRL_FD;
- else
+ else
ctrl &= ~E1000_CTRL_FD;
e1000_config_collision_dist(hw);
@@ -2884,7 +2884,7 @@ e1000_get_speed_and_duplex(struct e1000_hw *hw,
}
}
- if ((hw->mac_type == e1000_80003es2lan) &&
+ if ((hw->mac_type == e1000_80003es2lan) &&
(hw->media_type == e1000_media_type_copper)) {
if (*speed == SPEED_1000)
ret_val = e1000_configure_kmrn_for_1000(hw);
@@ -3160,7 +3160,7 @@ e1000_read_phy_reg(struct e1000_hw *hw,
if (e1000_swfw_sync_acquire(hw, swfw))
return -E1000_ERR_SWFW_SYNC;
- if((hw->phy_type == e1000_phy_igp ||
+ if((hw->phy_type == e1000_phy_igp ||
hw->phy_type == e1000_phy_igp_2) &&
(reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
@@ -3299,7 +3299,7 @@ e1000_write_phy_reg(struct e1000_hw *hw,
if (e1000_swfw_sync_acquire(hw, swfw))
return -E1000_ERR_SWFW_SYNC;
- if((hw->phy_type == e1000_phy_igp ||
+ if((hw->phy_type == e1000_phy_igp ||
hw->phy_type == e1000_phy_igp_2) &&
(reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
@@ -3497,22 +3497,22 @@ e1000_phy_hw_reset(struct e1000_hw *hw)
}
/* Read the device control register and assert the E1000_CTRL_PHY_RST
* bit. Then, take it out of reset.
- * For pre-e1000_82571 hardware, we delay for 10ms between the assert
+ * For pre-e1000_82571 hardware, we delay for 10ms between the assert
* and deassert. For e1000_82571 hardware and later, we instead delay
* for 50us between and 10ms after the deassertion.
*/
ctrl = E1000_READ_REG(hw, CTRL);
E1000_WRITE_REG(hw, CTRL, ctrl | E1000_CTRL_PHY_RST);
E1000_WRITE_FLUSH(hw);
-
- if (hw->mac_type < e1000_82571)
+
+ if (hw->mac_type < e1000_82571)
msec_delay(10);
else
udelay(100);
-
+
E1000_WRITE_REG(hw, CTRL, ctrl);
E1000_WRITE_FLUSH(hw);
-
+
if (hw->mac_type >= e1000_82571)
msec_delay(10);
e1000_swfw_sync_release(hw, swfw);
@@ -3816,7 +3816,7 @@ e1000_phy_m88_get_info(struct e1000_hw *hw,
/* Check polarity status */
ret_val = e1000_check_polarity(hw, &polarity);
if(ret_val)
- return ret_val;
+ return ret_val;
phy_info->cable_polarity = polarity;
ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
@@ -4541,14 +4541,14 @@ e1000_read_eeprom_eerd(struct e1000_hw *hw,
E1000_WRITE_REG(hw, EERD, eerd);
error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_READ);
-
+
if(error) {
break;
}
data[i] = (E1000_READ_REG(hw, EERD) >> E1000_EEPROM_RW_REG_DATA);
-
+
}
-
+
return error;
}
@@ -4574,24 +4574,24 @@ e1000_write_eeprom_eewr(struct e1000_hw *hw,
return -E1000_ERR_SWFW_SYNC;
for (i = 0; i < words; i++) {
- register_value = (data[i] << E1000_EEPROM_RW_REG_DATA) |
- ((offset+i) << E1000_EEPROM_RW_ADDR_SHIFT) |
+ register_value = (data[i] << E1000_EEPROM_RW_REG_DATA) |
+ ((offset+i) << E1000_EEPROM_RW_ADDR_SHIFT) |
E1000_EEPROM_RW_REG_START;
error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_WRITE);
if(error) {
break;
- }
+ }
E1000_WRITE_REG(hw, EEWR, register_value);
-
+
error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_WRITE);
-
+
if(error) {
break;
- }
+ }
}
-
+
e1000_swfw_sync_release(hw, E1000_SWFW_EEP_SM);
return error;
}
@@ -4611,7 +4611,7 @@ e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd)
for(i = 0; i < attempts; i++) {
if(eerd == E1000_EEPROM_POLL_READ)
reg = E1000_READ_REG(hw, EERD);
- else
+ else
reg = E1000_READ_REG(hw, EEWR);
if(reg & E1000_EEPROM_RW_REG_DONE) {
@@ -5136,7 +5136,7 @@ e1000_mc_addr_list_update(struct e1000_hw *hw,
uint32_t i;
uint32_t num_rar_entry;
uint32_t num_mta_entry;
-
+
DEBUGFUNC("e1000_mc_addr_list_update");
/* Set the new number of MC addresses that we are being requested to use. */
@@ -6241,7 +6241,7 @@ e1000_check_polarity(struct e1000_hw *hw,
* 1 - Downshift ocured.
*
* returns: - E1000_ERR_XXX
- * E1000_SUCCESS
+ * E1000_SUCCESS
*
* For phy's older then IGP, this function reads the Downshift bit in the Phy
* Specific Status register. For IGP phy's, it reads the Downgrade bit in the
@@ -6256,7 +6256,7 @@ e1000_check_downshift(struct e1000_hw *hw)
DEBUGFUNC("e1000_check_downshift");
- if(hw->phy_type == e1000_phy_igp ||
+ if(hw->phy_type == e1000_phy_igp ||
hw->phy_type == e1000_phy_igp_2) {
ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_LINK_HEALTH,
&phy_data);
@@ -6685,8 +6685,8 @@ e1000_set_d0_lplu_state(struct e1000_hw *hw,
} else {
-
- phy_data |= IGP02E1000_PM_D0_LPLU;
+
+ phy_data |= IGP02E1000_PM_D0_LPLU;
ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
if (ret_val)
return ret_val;
@@ -6778,7 +6778,7 @@ int32_t
e1000_host_if_read_cookie(struct e1000_hw * hw, uint8_t *buffer)
{
uint8_t i;
- uint32_t offset = E1000_MNG_DHCP_COOKIE_OFFSET;
+ uint32_t offset = E1000_MNG_DHCP_COOKIE_OFFSET;
uint8_t length = E1000_MNG_DHCP_COOKIE_LENGTH;
length = (length >> 2);
@@ -6797,7 +6797,7 @@ e1000_host_if_read_cookie(struct e1000_hw * hw, uint8_t *buffer)
* and also checks whether the previous command is completed.
* It busy waits in case of previous command is not completed.
*
- * returns: - E1000_ERR_HOST_INTERFACE_COMMAND in case if is not ready or
+ * returns: - E1000_ERR_HOST_INTERFACE_COMMAND in case if is not ready or
* timeout
* - E1000_SUCCESS for success.
****************************************************************************/
@@ -6821,7 +6821,7 @@ e1000_mng_enable_host_if(struct e1000_hw * hw)
msec_delay_irq(1);
}
- if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) {
+ if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) {
DEBUGOUT("Previous command timeout failed .\n");
return -E1000_ERR_HOST_INTERFACE_COMMAND;
}
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index 03d07ebde4f..467c9ed944f 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -375,7 +375,7 @@ struct e1000_host_mng_dhcp_cookie{
};
#endif
-int32_t e1000_mng_write_dhcp_info(struct e1000_hw *hw, uint8_t *buffer,
+int32_t e1000_mng_write_dhcp_info(struct e1000_hw *hw, uint8_t *buffer,
uint16_t length);
boolean_t e1000_check_mng_mode(struct e1000_hw *hw);
boolean_t e1000_enable_tx_pkt_filtering(struct e1000_hw *hw);
@@ -1802,7 +1802,7 @@ struct e1000_hw {
* value2 = [0..64512], default=4096
* value3 = [0..64512], default=0
*/
-
+
#define E1000_PSRCTL_BSIZE0_MASK 0x0000007F
#define E1000_PSRCTL_BSIZE1_MASK 0x00003F00
#define E1000_PSRCTL_BSIZE2_MASK 0x003F0000
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index df819c1275a..ccbe342198a 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -349,7 +349,7 @@ e1000_update_mng_vlan(struct e1000_adapter *adapter)
* For ASF and Pass Through versions of f/w this means that the
* driver is no longer loaded. For AMT version (only with 82573) i
* of the f/w this means that the netowrk i/f is closed.
- *
+ *
**/
static void
@@ -381,10 +381,10 @@ e1000_release_hw_control(struct e1000_adapter *adapter)
* @adapter: address of board private structure
*
* e1000_get_hw_control sets {CTRL_EXT|FWSM}:DRV_LOAD bit.
- * For ASF and Pass Through versions of f/w this means that
- * the driver is loaded. For AMT version (only with 82573)
+ * For ASF and Pass Through versions of f/w this means that
+ * the driver is loaded. For AMT version (only with 82573)
* of the f/w this means that the netowrk i/f is open.
- *
+ *
**/
static void
@@ -714,8 +714,8 @@ e1000_probe(struct pci_dev *pdev,
DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n");
/* if ksp3, indicate if it's port a being setup */
- if (pdev->device == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 &&
- e1000_ksp3_port_a == 0)
+ if (pdev->device == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 &&
+ e1000_ksp3_port_a == 0)
adapter->ksp3_port_a = 1;
e1000_ksp3_port_a++;
/* Reset for multiple KP3 adapters */
@@ -743,9 +743,9 @@ e1000_probe(struct pci_dev *pdev,
if (pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA;
- /* hard_start_xmit is safe against parallel locking */
- netdev->features |= NETIF_F_LLTX;
-
+ /* hard_start_xmit is safe against parallel locking */
+ netdev->features |= NETIF_F_LLTX;
+
adapter->en_mng_pt = e1000_enable_mng_pass_thru(&adapter->hw);
/* before reading the EEPROM, reset the controller to
@@ -2773,7 +2773,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
unsigned int nr_frags = 0;
unsigned int mss = 0;
int count = 0;
- int tso;
+ int tso;
unsigned int f;
len -= skb->data_len;
@@ -2786,7 +2786,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
#ifdef NETIF_F_TSO
mss = skb_shinfo(skb)->tso_size;
- /* The controller does a simple calculation to
+ /* The controller does a simple calculation to
* make sure there is enough room in the FIFO before
* initiating the DMA for each buffer. The calc is:
* 4 = ceil(buffer len/mss). To make sure we don't
@@ -2809,7 +2809,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
case e1000_82573:
pull_size = min((unsigned int)4, skb->data_len);
if (!__pskb_pull_tail(skb, pull_size)) {
- printk(KERN_ERR
+ printk(KERN_ERR
"__pskb_pull_tail failed.\n");
dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
@@ -3755,7 +3755,7 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
* throughput, so unsplit small packets and save the alloc/put*/
if (l1 && ((length + l1) <= adapter->rx_ps_bsize0)) {
u8 *vaddr;
- /* there is no documentation about how to call
+ /* there is no documentation about how to call
* kmap_atomic, so we can't hold the mapping
* very long */
pci_dma_sync_single_for_cpu(pdev,
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-23 21:36:46 +0000