summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/scsi/arm/acornscsi.c14
-rw-r--r--drivers/scsi/arm/scsi.h87
2 files changed, 58 insertions, 43 deletions
diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c
index eceacf6d49e..3bedf2466bd 100644
--- a/drivers/scsi/arm/acornscsi.c
+++ b/drivers/scsi/arm/acornscsi.c
@@ -1790,7 +1790,7 @@ int acornscsi_starttransfer(AS_Host *host)
return 0;
}
- residual = host->SCpnt->request_bufflen - host->scsi.SCp.scsi_xferred;
+ residual = scsi_bufflen(host->SCpnt) - host->scsi.SCp.scsi_xferred;
sbic_arm_write(host->scsi.io_port, SBIC_SYNCHTRANSFER, host->device[host->SCpnt->device->id].sync_xfer);
sbic_arm_writenext(host->scsi.io_port, residual >> 16);
@@ -2270,7 +2270,7 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq)
case 0x4b: /* -> PHASE_STATUSIN */
case 0x8b: /* -> PHASE_STATUSIN */
/* DATA IN -> STATUS */
- host->scsi.SCp.scsi_xferred = host->SCpnt->request_bufflen -
+ host->scsi.SCp.scsi_xferred = scsi_bufflen(host->SCpnt) -
acornscsi_sbic_xfcount(host);
acornscsi_dma_stop(host);
acornscsi_readstatusbyte(host);
@@ -2281,7 +2281,7 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq)
case 0x4e: /* -> PHASE_MSGOUT */
case 0x8e: /* -> PHASE_MSGOUT */
/* DATA IN -> MESSAGE OUT */
- host->scsi.SCp.scsi_xferred = host->SCpnt->request_bufflen -
+ host->scsi.SCp.scsi_xferred = scsi_bufflen(host->SCpnt) -
acornscsi_sbic_xfcount(host);
acornscsi_dma_stop(host);
acornscsi_sendmessage(host);
@@ -2291,7 +2291,7 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq)
case 0x4f: /* message in */
case 0x8f: /* message in */
/* DATA IN -> MESSAGE IN */
- host->scsi.SCp.scsi_xferred = host->SCpnt->request_bufflen -
+ host->scsi.SCp.scsi_xferred = scsi_bufflen(host->SCpnt) -
acornscsi_sbic_xfcount(host);
acornscsi_dma_stop(host);
acornscsi_message(host); /* -> PHASE_MSGIN, PHASE_DISCONNECT */
@@ -2319,7 +2319,7 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq)
case 0x4b: /* -> PHASE_STATUSIN */
case 0x8b: /* -> PHASE_STATUSIN */
/* DATA OUT -> STATUS */
- host->scsi.SCp.scsi_xferred = host->SCpnt->request_bufflen -
+ host->scsi.SCp.scsi_xferred = scsi_bufflen(host->SCpnt) -
acornscsi_sbic_xfcount(host);
acornscsi_dma_stop(host);
acornscsi_dma_adjust(host);
@@ -2331,7 +2331,7 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq)
case 0x4e: /* -> PHASE_MSGOUT */
case 0x8e: /* -> PHASE_MSGOUT */
/* DATA OUT -> MESSAGE OUT */
- host->scsi.SCp.scsi_xferred = host->SCpnt->request_bufflen -
+ host->scsi.SCp.scsi_xferred = scsi_bufflen(host->SCpnt) -
acornscsi_sbic_xfcount(host);
acornscsi_dma_stop(host);
acornscsi_dma_adjust(host);
@@ -2342,7 +2342,7 @@ intr_ret_t acornscsi_sbicintr(AS_Host *host, int in_irq)
case 0x4f: /* message in */
case 0x8f: /* message in */
/* DATA OUT -> MESSAGE IN */
- host->scsi.SCp.scsi_xferred = host->SCpnt->request_bufflen -
+ host->scsi.SCp.scsi_xferred = scsi_bufflen(host->SCpnt) -
acornscsi_sbic_xfcount(host);
acornscsi_dma_stop(host);
acornscsi_dma_adjust(host);
diff --git a/drivers/scsi/arm/scsi.h b/drivers/scsi/arm/scsi.h
index bb6550e3192..138a521ba1a 100644
--- a/drivers/scsi/arm/scsi.h
+++ b/drivers/scsi/arm/scsi.h
@@ -18,17 +18,32 @@
* The scatter-gather list handling. This contains all
* the yucky stuff that needs to be fixed properly.
*/
+
+/*
+ * copy_SCp_to_sg() Assumes contiguous allocation at @sg of at-most @max
+ * entries of uninitialized memory. SCp is from scsi-ml and has a valid
+ * (possibly chained) sg-list
+ */
static inline int copy_SCp_to_sg(struct scatterlist *sg, struct scsi_pointer *SCp, int max)
{
int bufs = SCp->buffers_residual;
+ /* FIXME: It should be easy for drivers to loop on copy_SCp_to_sg().
+ * and to remove this BUG_ON. Use min() in-its-place
+ */
BUG_ON(bufs + 1 > max);
sg_set_buf(sg, SCp->ptr, SCp->this_residual);
- if (bufs)
- memcpy(sg + 1, SCp->buffer + 1,
- sizeof(struct scatterlist) * bufs);
+ if (bufs) {
+ struct scatterlist *src_sg;
+ unsigned i;
+
+ for_each_sg(sg_next(SCp->buffer), src_sg, bufs, i)
+ *(++sg) = *src_sg;
+ sg_mark_end(sg);
+ }
+
return bufs + 1;
}
@@ -36,7 +51,7 @@ static inline int next_SCp(struct scsi_pointer *SCp)
{
int ret = SCp->buffers_residual;
if (ret) {
- SCp->buffer++;
+ SCp->buffer = sg_next(SCp->buffer);
SCp->buffers_residual--;
SCp->ptr = sg_virt(SCp->buffer);
SCp->this_residual = SCp->buffer->length;
@@ -68,46 +83,46 @@ static inline void init_SCp(struct scsi_cmnd *SCpnt)
{
memset(&SCpnt->SCp, 0, sizeof(struct scsi_pointer));
- if (SCpnt->use_sg) {
+ if (scsi_bufflen(SCpnt)) {
unsigned long len = 0;
- int buf;
- SCpnt->SCp.buffer = (struct scatterlist *) SCpnt->request_buffer;
- SCpnt->SCp.buffers_residual = SCpnt->use_sg - 1;
+ SCpnt->SCp.buffer = scsi_sglist(SCpnt);
+ SCpnt->SCp.buffers_residual = scsi_sg_count(SCpnt) - 1;
SCpnt->SCp.ptr = sg_virt(SCpnt->SCp.buffer);
SCpnt->SCp.this_residual = SCpnt->SCp.buffer->length;
- SCpnt->SCp.phase = SCpnt->request_bufflen;
+ SCpnt->SCp.phase = scsi_bufflen(SCpnt);
#ifdef BELT_AND_BRACES
- /*
- * Calculate correct buffer length. Some commands
- * come in with the wrong request_bufflen.
- */
- for (buf = 0; buf <= SCpnt->SCp.buffers_residual; buf++)
- len += SCpnt->SCp.buffer[buf].length;
-
- if (SCpnt->request_bufflen != len)
- printk(KERN_WARNING "scsi%d.%c: bad request buffer "
- "length %d, should be %ld\n", SCpnt->device->host->host_no,
- '0' + SCpnt->device->id, SCpnt->request_bufflen, len);
- SCpnt->request_bufflen = len;
+ { /*
+ * Calculate correct buffer length. Some commands
+ * come in with the wrong scsi_bufflen.
+ */
+ struct scatterlist *sg;
+ unsigned i, sg_count = scsi_sg_count(SCpnt);
+
+ scsi_for_each_sg(SCpnt, sg, sg_count, i)
+ len += sg->length;
+
+ if (scsi_bufflen(SCpnt) != len) {
+ printk(KERN_WARNING
+ "scsi%d.%c: bad request buffer "
+ "length %d, should be %ld\n",
+ SCpnt->device->host->host_no,
+ '0' + SCpnt->device->id,
+ scsi_bufflen(SCpnt), len);
+ /*
+ * FIXME: Totaly naive fixup. We should abort
+ * with error
+ */
+ SCpnt->SCp.phase =
+ min_t(unsigned long, len,
+ scsi_bufflen(SCpnt));
+ }
+ }
#endif
} else {
- SCpnt->SCp.ptr = (unsigned char *)SCpnt->request_buffer;
- SCpnt->SCp.this_residual = SCpnt->request_bufflen;
- SCpnt->SCp.phase = SCpnt->request_bufflen;
- }
-
- /*
- * If the upper SCSI layers pass a buffer, but zero length,
- * we aren't interested in the buffer pointer.
- */
- if (SCpnt->SCp.this_residual == 0 && SCpnt->SCp.ptr) {
-#if 0 //def BELT_AND_BRACES
- printk(KERN_WARNING "scsi%d.%c: zero length buffer passed for "
- "command ", SCpnt->host->host_no, '0' + SCpnt->target);
- __scsi_print_command(SCpnt->cmnd);
-#endif
SCpnt->SCp.ptr = NULL;
+ SCpnt->SCp.this_residual = 0;
+ SCpnt->SCp.phase = 0;
}
}