diff options
-rw-r--r-- | Documentation/hwmon/sch5627 | 22 | ||||
-rw-r--r-- | MAINTAINERS | 7 | ||||
-rw-r--r-- | drivers/hwmon/Kconfig | 9 | ||||
-rw-r--r-- | drivers/hwmon/Makefile | 1 | ||||
-rw-r--r-- | drivers/hwmon/sch5627.c | 858 |
5 files changed, 897 insertions, 0 deletions
diff --git a/Documentation/hwmon/sch5627 b/Documentation/hwmon/sch5627 new file mode 100644 index 00000000000..446a054e491 --- /dev/null +++ b/Documentation/hwmon/sch5627 @@ -0,0 +1,22 @@ +Kernel driver sch5627 +===================== + +Supported chips: + * SMSC SCH5627 + Prefix: 'sch5627' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Application Note available upon request + +Author: Hans de Goede <hdegoede@redhat.com> + + +Description +----------- + +SMSC SCH5627 Super I/O chips include complete hardware monitoring +capabilities. They can monitor up to 5 voltages, 4 fans and 8 temperatures. + +The hardware monitoring part of the SMSC SCH5627 is accessed by talking +through an embedded microcontroller. An application note describing the +protocol for communicating with the microcontroller is available upon +request. Please mail me if you want a copy. diff --git a/MAINTAINERS b/MAINTAINERS index 666287a6f3d..b8a123f7e81 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5769,6 +5769,13 @@ S: Supported F: Documentation/hwmon/emc2103 F: drivers/hwmon/emc2103.c +SMSC SCH5627 HARDWARE MONITOR DRIVER +M: Hans de Goede <hdegoede@redhat.com> +L: lm-sensors@lm-sensors.org +S: Supported +F: Documentation/hwmon/sch5627 +F: drivers/hwmon/sch5627.c + SMSC47B397 HARDWARE MONITOR DRIVER M: "Mark M. Hoffman" <mhoffman@lightlink.com> L: lm-sensors@lm-sensors.org diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 19d72bcf966..6fad9f082f6 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -959,6 +959,15 @@ config SENSORS_SMSC47B397 This driver can also be built as a module. If so, the module will be called smsc47b397. +config SENSORS_SCH5627 + tristate "SMSC SCH5627" + help + If you say yes here you get support for the hardware monitoring + features of the SMSC SCH5627 Super-I/O chip. + + This driver can also be built as a module. If so, the module + will be called sch5627. + config SENSORS_ADS7828 tristate "Texas Instruments ADS7828" depends on I2C diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index c068f82082c..4d0122c5221 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -90,6 +90,7 @@ obj-$(CONFIG_SENSORS_PC87360) += pc87360.o obj-$(CONFIG_SENSORS_PC87427) += pc87427.o obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o obj-$(CONFIG_SENSORS_S3C) += s3c-hwmon.o +obj-$(CONFIG_SENSORS_SCH5627) += sch5627.o obj-$(CONFIG_SENSORS_SHT15) += sht15.o obj-$(CONFIG_SENSORS_SHT21) += sht21.o obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o diff --git a/drivers/hwmon/sch5627.c b/drivers/hwmon/sch5627.c new file mode 100644 index 00000000000..9a51dcca9b0 --- /dev/null +++ b/drivers/hwmon/sch5627.c @@ -0,0 +1,858 @@ +/*************************************************************************** + * Copyright (C) 2010-2011 Hans de Goede <hdegoede@redhat.com> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the * + * Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + ***************************************************************************/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/platform_device.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/io.h> +#include <linux/acpi.h> +#include <linux/delay.h> + +#define DRVNAME "sch5627" +#define DEVNAME DRVNAME /* We only support one model */ + +#define SIO_SCH5627_EM_LD 0x0C /* Embedded Microcontroller LD */ +#define SIO_UNLOCK_KEY 0x55 /* Key to enable Super-I/O */ +#define SIO_LOCK_KEY 0xAA /* Key to disable Super-I/O */ + +#define SIO_REG_LDSEL 0x07 /* Logical device select */ +#define SIO_REG_DEVID 0x20 /* Device ID */ +#define SIO_REG_ENABLE 0x30 /* Logical device enable */ +#define SIO_REG_ADDR 0x66 /* Logical device address (2 bytes) */ + +#define SIO_SCH5627_ID 0xC6 /* Chipset ID */ + +#define REGION_LENGTH 9 + +#define SCH5627_HWMON_ID 0xa5 +#define SCH5627_COMPANY_ID 0x5c +#define SCH5627_PRIMARY_ID 0xa0 + +#define SCH5627_REG_BUILD_CODE 0x39 +#define SCH5627_REG_BUILD_ID 0x3a +#define SCH5627_REG_HWMON_ID 0x3c +#define SCH5627_REG_HWMON_REV 0x3d +#define SCH5627_REG_COMPANY_ID 0x3e +#define SCH5627_REG_PRIMARY_ID 0x3f +#define SCH5627_REG_CTRL 0x40 + +#define SCH5627_NO_TEMPS 8 +#define SCH5627_NO_FANS 4 +#define SCH5627_NO_IN 5 + +static const u16 SCH5627_REG_TEMP_MSB[SCH5627_NO_TEMPS] = { + 0x2B, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x180, 0x181 }; +static const u16 SCH5627_REG_TEMP_LSN[SCH5627_NO_TEMPS] = { + 0xE2, 0xE1, 0xE1, 0xE5, 0xE5, 0xE6, 0x182, 0x182 }; +static const u16 SCH5627_REG_TEMP_HIGH_NIBBLE[SCH5627_NO_TEMPS] = { + 0, 0, 1, 1, 0, 0, 0, 1 }; +static const u16 SCH5627_REG_TEMP_HIGH[SCH5627_NO_TEMPS] = { + 0x61, 0x57, 0x59, 0x5B, 0x5D, 0x5F, 0x184, 0x186 }; +static const u16 SCH5627_REG_TEMP_ABS[SCH5627_NO_TEMPS] = { + 0x9B, 0x96, 0x97, 0x98, 0x99, 0x9A, 0x1A8, 0x1A9 }; + +static const u16 SCH5627_REG_FAN[SCH5627_NO_FANS] = { + 0x2C, 0x2E, 0x30, 0x32 }; +static const u16 SCH5627_REG_FAN_MIN[SCH5627_NO_FANS] = { + 0x62, 0x64, 0x66, 0x68 }; + +static const u16 SCH5627_REG_IN_MSB[SCH5627_NO_IN] = { + 0x22, 0x23, 0x24, 0x25, 0x189 }; +static const u16 SCH5627_REG_IN_LSN[SCH5627_NO_IN] = { + 0xE4, 0xE4, 0xE3, 0xE3, 0x18A }; +static const u16 SCH5627_REG_IN_HIGH_NIBBLE[SCH5627_NO_IN] = { + 1, 0, 1, 0, 1 }; +static const u16 SCH5627_REG_IN_FACTOR[SCH5627_NO_IN] = { + 10745, 3660, 9765, 10745, 3660 }; +static const char * const SCH5627_IN_LABELS[SCH5627_NO_IN] = { + "VCC", "VTT", "VBAT", "VTR", "V_IN" }; + +struct sch5627_data { + unsigned short addr; + struct device *hwmon_dev; + u8 temp_max[SCH5627_NO_TEMPS]; + u8 temp_crit[SCH5627_NO_TEMPS]; + u16 fan_min[SCH5627_NO_FANS]; + + struct mutex update_lock; + char valid; /* !=0 if following fields are valid */ + unsigned long last_updated; /* In jiffies */ + u16 temp[SCH5627_NO_TEMPS]; + u16 fan[SCH5627_NO_FANS]; + u16 in[SCH5627_NO_IN]; +}; + +static struct platform_device *sch5627_pdev; + +/* Super I/O functions */ +static inline int superio_inb(int base, int reg) +{ + outb(reg, base); + return inb(base + 1); +} + +static inline int superio_enter(int base) +{ + /* Don't step on other drivers' I/O space by accident */ + if (!request_muxed_region(base, 2, DRVNAME)) { + pr_err("I/O address 0x%04x already in use\n", base); + return -EBUSY; + } + + outb(SIO_UNLOCK_KEY, base); + + return 0; +} + +static inline void superio_select(int base, int ld) +{ + outb(SIO_REG_LDSEL, base); + outb(ld, base + 1); +} + +static inline void superio_exit(int base) +{ + outb(SIO_LOCK_KEY, base); + release_region(base, 2); +} + +static int sch5627_read_virtual_reg(struct sch5627_data *data, u16 reg) +{ + u8 val; + int i; + /* + * According to SMSC for the commands we use the maximum time for + * the EM to respond is 15 ms, but testing shows in practice it + * responds within 15-32 reads, so we first busy poll, and if + * that fails sleep a bit and try again until we are way past + * the 15 ms maximum response time. + */ + const int max_busy_polls = 64; + const int max_lazy_polls = 32; + + /* (Optional) Write-Clear the EC to Host Mailbox Register */ + val = inb(data->addr + 1); + outb(val, data->addr + 1); + + /* Set Mailbox Address Pointer to first location in Region 1 */ + outb(0x00, data->addr + 2); + outb(0x80, data->addr + 3); + + /* Write Request Packet Header */ + outb(0x02, data->addr + 4); /* Access Type: VREG read */ + outb(0x01, data->addr + 5); /* # of Entries: 1 Byte (8-bit) */ + outb(0x04, data->addr + 2); /* Mailbox AP to first data entry loc. */ + + /* Write Address field */ + outb(reg & 0xff, data->addr + 6); + outb(reg >> 8, data->addr + 7); + + /* Execute the Random Access Command */ + outb(0x01, data->addr); /* Write 01h to the Host-to-EC register */ + + /* EM Interface Polling "Algorithm" */ + for (i = 0; i < max_busy_polls + max_lazy_polls; i++) { + if (i >= max_busy_polls) + msleep(1); + /* Read Interrupt source Register */ + val = inb(data->addr + 8); + /* Write Clear the interrupt source bits */ + if (val) + outb(val, data->addr + 8); + /* Command Completed ? */ + if (val & 0x01) + break; + } + if (i == max_busy_polls + max_lazy_polls) { + pr_err("Max retries exceeded reading virtual " + "register 0x%04hx (%d)\n", reg, 1); + return -EIO; + } + + /* + * According to SMSC we may need to retry this, but sofar I've always + * seen this succeed in 1 try. + */ + for (i = 0; i < max_busy_polls; i++) { + /* Read EC-to-Host Register */ + val = inb(data->addr + 1); + /* Command Completed ? */ + if (val == 0x01) + break; + + if (i == 0) + pr_warn("EC reports: 0x%02x reading virtual register " + "0x%04hx\n", (unsigned int)val, reg); + } + if (i == max_busy_polls) { + pr_err("Max retries exceeded reading virtual " + "register 0x%04hx (%d)\n", reg, 2); + return -EIO; + } + + /* + * According to the SMSC app note we should now do: + * + * Set Mailbox Address Pointer to first location in Region 1 * + * outb(0x00, data->addr + 2); + * outb(0x80, data->addr + 3); + * + * But if we do that things don't work, so let's not. + */ + + /* Read Data from Mailbox */ + return inb(data->addr + 4); +} + +static int sch5627_read_virtual_reg16(struct sch5627_data *data, u16 reg) +{ + int lsb, msb; + + /* Read LSB first, this will cause the matching MSB to be latched */ + lsb = sch5627_read_virtual_reg(data, reg); + if (lsb < 0) + return lsb; + + msb = sch5627_read_virtual_reg(data, reg + 1); + if (msb < 0) + return msb; + + return lsb | (msb << 8); +} + +static int sch5627_read_virtual_reg12(struct sch5627_data *data, u16 msb_reg, + u16 lsn_reg, int high_nibble) +{ + int msb, lsn; + + /* Read MSB first, this will cause the matching LSN to be latched */ + msb = sch5627_read_virtual_reg(data, msb_reg); + if (msb < 0) + return msb; + + lsn = sch5627_read_virtual_reg(data, lsn_reg); + if (lsn < 0) + return lsn; + + if (high_nibble) + return (msb << 4) | (lsn >> 4); + else + return (msb << 4) | (lsn & 0x0f); +} + +static struct sch5627_data *sch5627_update_device(struct device *dev) +{ + struct sch5627_data *data = dev_get_drvdata(dev); + struct sch5627_data *ret = data; + int i, val; + + mutex_lock(&data->update_lock); + + /* Cache the values for 1 second */ + if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { + for (i = 0; i < SCH5627_NO_TEMPS; i++) { + val = sch5627_read_virtual_reg12(data, + SCH5627_REG_TEMP_MSB[i], + SCH5627_REG_TEMP_LSN[i], + SCH5627_REG_TEMP_HIGH_NIBBLE[i]); + if (unlikely(val < 0)) { + ret = ERR_PTR(val); + goto abort; + } + data->temp[i] = val; + } + + for (i = 0; i < SCH5627_NO_FANS; i++) { + val = sch5627_read_virtual_reg16(data, + SCH5627_REG_FAN[i]); + if (unlikely(val < 0)) { + ret = ERR_PTR(val); + goto abort; + } + data->fan[i] = val; + } + + for (i = 0; i < SCH5627_NO_IN; i++) { + val = sch5627_read_virtual_reg12(data, + SCH5627_REG_IN_MSB[i], + SCH5627_REG_IN_LSN[i], + SCH5627_REG_IN_HIGH_NIBBLE[i]); + if (unlikely(val < 0)) { + ret = ERR_PTR(val); + goto abort; + } + data->in[i] = val; + } + + data->last_updated = jiffies; + data->valid = 1; + } +abort: + mutex_unlock(&data->update_lock); + return ret; +} + +static int __devinit sch5627_read_limits(struct sch5627_data *data) +{ + int i, val; + + for (i = 0; i < SCH5627_NO_TEMPS; i++) { + /* + * Note what SMSC calls ABS, is what lm_sensors calls max + * (aka high), and HIGH is what lm_sensors calls crit. + */ + val = sch5627_read_virtual_reg(data, SCH5627_REG_TEMP_ABS[i]); + if (val < 0) + return val; + data->temp_max[i] = val; + + val = sch5627_read_virtual_reg(data, SCH5627_REG_TEMP_HIGH[i]); + if (val < 0) + return val; + data->temp_crit[i] = val; + } + for (i = 0; i < SCH5627_NO_FANS; i++) { + val = sch5627_read_virtual_reg16(data, SCH5627_REG_FAN_MIN[i]); + if (val < 0) + return val; + data->fan_min[i] = val; + } + + return 0; +} + +static int reg_to_temp(u16 reg) +{ + return (reg * 625) / 10 - 64000; +} + +static int reg_to_temp_limit(u8 reg) +{ + return (reg - 64) * 1000; +} + +static int reg_to_rpm(u16 reg) +{ + if (reg == 0) + return -EIO; + if (reg == 0xffff) + return 0; + + return 5400540 / reg; +} + +static ssize_t show_name(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%s\n", DEVNAME); +} + +static ssize_t show_temp(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct sch5627_data *data = sch5627_update_device(dev); + int val; + + if (IS_ERR(data)) + return PTR_ERR(data); + + val = reg_to_temp(data->temp[attr->index]); + return snprintf(buf, PAGE_SIZE, "%d\n", val); +} + +static ssize_t show_temp_fault(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct sch5627_data *data = sch5627_update_device(dev); + + if (IS_ERR(data)) + return PTR_ERR(data); + + return snprintf(buf, PAGE_SIZE, "%d\n", data->temp[attr->index] == 0); +} + +static ssize_t show_temp_max(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct sch5627_data *data = dev_get_drvdata(dev); + int val; + + val = reg_to_temp_limit(data->temp_max[attr->index]); + return snprintf(buf, PAGE_SIZE, "%d\n", val); +} + +static ssize_t show_temp_crit(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct sch5627_data *data = dev_get_drvdata(dev); + int val; + + val = reg_to_temp_limit(data->temp_crit[attr->index]); + return snprintf(buf, PAGE_SIZE, "%d\n", val); +} + +static ssize_t show_fan(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct sch5627_data *data = sch5627_update_device(dev); + int val; + + if (IS_ERR(data)) + return PTR_ERR(data); + + val = reg_to_rpm(data->fan[attr->index]); + if (val < 0) + return val; + + return snprintf(buf, PAGE_SIZE, "%d\n", val); +} + +static ssize_t show_fan_fault(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct sch5627_data *data = sch5627_update_device(dev); + + if (IS_ERR(data)) + return PTR_ERR(data); + + return snprintf(buf, PAGE_SIZE, "%d\n", + data->fan[attr->index] == 0xffff); +} + +static ssize_t show_fan_min(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct sch5627_data *data = dev_get_drvdata(dev); + int val = reg_to_rpm(data->fan_min[attr->index]); + if (val < 0) + return val; + + return snprintf(buf, PAGE_SIZE, "%d\n", val); +} + +static ssize_t show_in(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct sch5627_data *data = sch5627_update_device(dev); + int val; + + if (IS_ERR(data)) + return PTR_ERR(data); + + val = DIV_ROUND_CLOSEST( + data->in[attr->index] * SCH5627_REG_IN_FACTOR[attr->index], + 10000); + return snprintf(buf, PAGE_SIZE, "%d\n", val); +} + +static ssize_t show_in_label(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + + return snprintf(buf, PAGE_SIZE, "%s\n", + SCH5627_IN_LABELS[attr->index]); +} + +static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1); +static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2); +static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3); +static SENSOR_DEVICE_ATTR(temp5_input, S_IRUGO, show_temp, NULL, 4); +static SENSOR_DEVICE_ATTR(temp6_input, S_IRUGO, show_temp, NULL, 5); +static SENSOR_DEVICE_ATTR(temp7_input, S_IRUGO, show_temp, NULL, 6); +static SENSOR_DEVICE_ATTR(temp8_input, S_IRUGO, show_temp, NULL, 7); +static SENSOR_DEVICE_ATTR(temp1_fault, S_IRUGO, show_temp_fault, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_temp_fault, NULL, 1); +static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_temp_fault, NULL, 2); +static SENSOR_DEVICE_ATTR(temp4_fault, S_IRUGO, show_temp_fault, NULL, 3); +static SENSOR_DEVICE_ATTR(temp5_fault, S_IRUGO, show_temp_fault, NULL, 4); +static SENSOR_DEVICE_ATTR(temp6_fault, S_IRUGO, show_temp_fault, NULL, 5); +static SENSOR_DEVICE_ATTR(temp7_fault, S_IRUGO, show_temp_fault, NULL, 6); +static SENSOR_DEVICE_ATTR(temp8_fault, S_IRUGO, show_temp_fault, NULL, 7); +static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp_max, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO, show_temp_max, NULL, 1); +static SENSOR_DEVICE_ATTR(temp3_max, S_IRUGO, show_temp_max, NULL, 2); +static SENSOR_DEVICE_ATTR(temp4_max, S_IRUGO, show_temp_max, NULL, 3); +static SENSOR_DEVICE_ATTR(temp5_max, S_IRUGO, show_temp_max, NULL, 4); +static SENSOR_DEVICE_ATTR(temp6_max, S_IRUGO, show_temp_max, NULL, 5); +static SENSOR_DEVICE_ATTR(temp7_max, S_IRUGO, show_temp_max, NULL, 6); +static SENSOR_DEVICE_ATTR(temp8_max, S_IRUGO, show_temp_max, NULL, 7); +static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp_crit, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp_crit, NULL, 1); +static SENSOR_DEVICE_ATTR(temp3_crit, S_IRUGO, show_temp_crit, NULL, 2); +static SENSOR_DEVICE_ATTR(temp4_crit, S_IRUGO, show_temp_crit, NULL, 3); +static SENSOR_DEVICE_ATTR(temp5_crit, S_IRUGO, show_temp_crit, NULL, 4); +static SENSOR_DEVICE_ATTR(temp6_crit, S_IRUGO, show_temp_crit, NULL, 5); +static SENSOR_DEVICE_ATTR(temp7_crit, S_IRUGO, show_temp_crit, NULL, 6); +static SENSOR_DEVICE_ATTR(temp8_crit, S_IRUGO, show_temp_crit, NULL, 7); + +static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); +static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1); +static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2); +static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3); +static SENSOR_DEVICE_ATTR(fan1_fault, S_IRUGO, show_fan_fault, NULL, 0); +static SENSOR_DEVICE_ATTR(fan2_fault, S_IRUGO, show_fan_fault, NULL, 1); +static SENSOR_DEVICE_ATTR(fan3_fault, S_IRUGO, show_fan_fault, NULL, 2); +static SENSOR_DEVICE_ATTR(fan4_fault, S_IRUGO, show_fan_fault, NULL, 3); +static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO, show_fan_min, NULL, 0); +static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO, show_fan_min, NULL, 1); +static SENSOR_DEVICE_ATTR(fan3_min, S_IRUGO, show_fan_min, NULL, 2); +static SENSOR_DEVICE_ATTR(fan4_min, S_IRUGO, show_fan_min, NULL, 3); + +static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_in, NULL, 0); +static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_in, NULL, 1); +static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_in, NULL, 2); +static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_in, NULL, 3); +static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_in, NULL, 4); +static SENSOR_DEVICE_ATTR(in0_label, S_IRUGO, show_in_label, NULL, 0); +static SENSOR_DEVICE_ATTR(in1_label, S_IRUGO, show_in_label, NULL, 1); +static SENSOR_DEVICE_ATTR(in2_label, S_IRUGO, show_in_label, NULL, 2); +static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_in_label, NULL, 3); + +static struct attribute *sch5627_attributes[] = { + &dev_attr_name.attr, + + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp4_input.dev_attr.attr, + &sensor_dev_attr_temp5_input.dev_attr.attr, + &sensor_dev_attr_temp6_input.dev_attr.attr, + &sensor_dev_attr_temp7_input.dev_attr.attr, + &sensor_dev_attr_temp8_input.dev_attr.attr, + &sensor_dev_attr_temp1_fault.dev_attr.attr, + &sensor_dev_attr_temp2_fault.dev_attr.attr, + &sensor_dev_attr_temp3_fault.dev_attr.attr, + &sensor_dev_attr_temp4_fault.dev_attr.attr, + &sensor_dev_attr_temp5_fault.dev_attr.attr, + &sensor_dev_attr_temp6_fault.dev_attr.attr, + &sensor_dev_attr_temp7_fault.dev_attr.attr, + &sensor_dev_attr_temp8_fault.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp3_max.dev_attr.attr, + &sensor_dev_attr_temp4_max.dev_attr.attr, + &sensor_dev_attr_temp5_max.dev_attr.attr, + &sensor_dev_attr_temp6_max.dev_attr.attr, + &sensor_dev_attr_temp7_max.dev_attr.attr, + &sensor_dev_attr_temp8_max.dev_attr.attr, + &sensor_dev_attr_temp1_crit.dev_attr.attr, + &sensor_dev_attr_temp2_crit.dev_attr.attr, + &sensor_dev_attr_temp3_crit.dev_attr.attr, + &sensor_dev_attr_temp4_crit.dev_attr.attr, + &sensor_dev_attr_temp5_crit.dev_attr.attr, + &sensor_dev_attr_temp6_crit.dev_attr.attr, + &sensor_dev_attr_temp7_crit.dev_attr.attr, + &sensor_dev_attr_temp8_crit.dev_attr.attr, + + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan2_input.dev_attr.attr, + &sensor_dev_attr_fan3_input.dev_attr.attr, + &sensor_dev_attr_fan4_input.dev_attr.attr, + &sensor_dev_attr_fan1_fault.dev_attr.attr, + &sensor_dev_attr_fan2_fault.dev_attr.attr, + &sensor_dev_attr_fan3_fault.dev_attr.attr, + &sensor_dev_attr_fan4_fault.dev_attr.attr, + &sensor_dev_attr_fan1_min.dev_attr.attr, + &sensor_dev_attr_fan2_min.dev_attr.attr, + &sensor_dev_attr_fan3_min.dev_attr.attr, + &sensor_dev_attr_fan4_min.dev_attr.attr, + + &sensor_dev_attr_in0_input.dev_attr.attr, + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in0_label.dev_attr.attr, + &sensor_dev_attr_in1_label.dev_attr.attr, + &sensor_dev_attr_in2_label.dev_attr.attr, + &sensor_dev_attr_in3_label.dev_attr.attr, + /* No in4_label as in4 is a generic input pin */ + + NULL +}; + +static const struct attribute_group sch5627_group = { + .attrs = sch5627_attributes, +}; + +static int sch5627_remove(struct platform_device *pdev) +{ + struct sch5627_data *data = platform_get_drvdata(pdev); + + if (data->hwmon_dev) + hwmon_device_unregister(data->hwmon_dev); + + sysfs_remove_group(&pdev->dev.kobj, &sch5627_group); + platform_set_drvdata(pdev, NULL); + kfree(data); + + return 0; +} + +static int __devinit sch5627_probe(struct platform_device *pdev) +{ + struct sch5627_data *data; + int err, build_code, build_id, hwmon_rev, val; + + data = kzalloc(sizeof(struct sch5627_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->addr = platform_get_resource(pdev, IORESOURCE_IO, 0)->start; + mutex_init(&data->update_lock); + platform_set_drvdata(pdev, data); + + val = sch5627_read_virtual_reg(data, SCH5627_REG_HWMON_ID); + if (val < 0) { + err = val; + goto error; + } + if (val != SCH5627_HWMON_ID) { + pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "hwmon", + val, SCH5627_HWMON_ID); + err = -ENODEV; + goto error; + } + + val = sch5627_read_virtual_reg(data, SCH5627_REG_COMPANY_ID); + if (val < 0) { + err = val; + goto error; + } + if (val != SCH5627_COMPANY_ID) { + pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "company", + val, SCH5627_COMPANY_ID); + err = -ENODEV; + goto error; + } + + val = sch5627_read_virtual_reg(data, SCH5627_REG_PRIMARY_ID); + if (val < 0) { + err = val; + goto error; + } + if (val != SCH5627_PRIMARY_ID) { + pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "primary", + val, SCH5627_PRIMARY_ID); + err = -ENODEV; + goto error; + } + + build_code = sch5627_read_virtual_reg(data, SCH5627_REG_BUILD_CODE); + if (build_code < 0) { + err = build_code; + goto error; + } + + build_id = sch5627_read_virtual_reg16(data, SCH5627_REG_BUILD_ID); + if (build_id < 0) { + err = build_id; + goto error; + } + + hwmon_rev = sch5627_read_virtual_reg(data, SCH5627_REG_HWMON_REV); + if (hwmon_rev < 0) { + err = hwmon_rev; + goto error; + } + + val = sch5627_read_virtual_reg(data, SCH5627_REG_CTRL); + if (val < 0) { + err = val; + goto error; + } + if (!(val & 0x01)) { + pr_err("hardware monitoring not enabled\n"); + err = -ENODEV; + goto error; + } + + /* + * Read limits, we do this only once as reading a register on + * the sch5627 is quite expensive (and they don't change). + */ + err = sch5627_read_limits(data); + if (err) + goto error; + + pr_info("firmware build: code 0x%02X, id 0x%04X, hwmon: rev 0x%02X\n", + build_code, build_id, hwmon_rev); + + /* Register sysfs interface files */ + err = sysfs_create_group(&pdev->dev.kobj, &sch5627_group); + if (err) + goto error; + + data->hwmon_dev = hwmon_device_register(&pdev->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + data->hwmon_dev = NULL; + goto error; + } + + return 0; + +error: + sch5627_remove(pdev); + return err; +} + +static int __init sch5627_find(int sioaddr, unsigned short *address) +{ + u8 devid; + int err = superio_enter(sioaddr); + if (err) + return err; + + devid = superio_inb(sioaddr, SIO_REG_DEVID); + if (devid != SIO_SCH5627_ID) { + pr_debug("Unsupported device id: 0x%02x\n", + (unsigned int)devid); + err = -ENODEV; + goto exit; + } + + superio_select(sioaddr, SIO_SCH5627_EM_LD); + + if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) { + pr_warn("Device not activated\n"); + err = -ENODEV; + goto exit; + } + + /* + * Warning the order of the low / high byte is the other way around + * as on most other superio devices!! + */ + *address = superio_inb(sioaddr, SIO_REG_ADDR) | + superio_inb(sioaddr, SIO_REG_ADDR + 1) << 8; + if (*address == 0) { + pr_warn("Base address not set\n"); + err = -ENODEV; + goto exit; + } + + pr_info("Found %s chip at %#hx\n", DEVNAME, *address); +exit: + superio_exit(sioaddr); + return err; +} + +static int __init sch5627_device_add(unsigned short address) +{ + struct resource res = { + .start = address, + .end = address + REGION_LENGTH - 1, + .flags = IORESOURCE_IO, + }; + int err; + + sch5627_pdev = platform_device_alloc(DRVNAME, address); + if (!sch5627_pdev) + return -ENOMEM; + + res.name = sch5627_pdev->name; + err = acpi_check_resource_conflict(&res); + if (err) + goto exit_device_put; + + err = platform_device_add_resources(sch5627_pdev, &res, 1); + if (err) { + pr_err("Device resource addition failed\n"); + goto exit_device_put; + } + + err = platform_device_add(sch5627_pdev); + if (err) { + pr_err("Device addition failed\n"); + goto exit_device_put; + } + + return 0; + +exit_device_put: + platform_device_put(sch5627_pdev); + + return err; +} + +static struct platform_driver sch5627_driver = { + .driver = { + .owner = THIS_MODULE, + .name = DRVNAME, + }, + .probe = sch5627_probe, + .remove = sch5627_remove, +}; + +static int __init sch5627_init(void) +{ + int err = -ENODEV; + unsigned short address; + + if (sch5627_find(0x4e, &address) && sch5627_find(0x2e, &address)) + goto exit; + + err = platform_driver_register(&sch5627_driver); + if (err) + goto exit; + + err = sch5627_device_add(address); + if (err) + goto exit_driver; + + return 0; + +exit_driver: + platform_driver_unregister(&sch5627_driver); +exit: + return err; +} + +static void __exit sch5627_exit(void) +{ + platform_device_unregister(sch5627_pdev); + platform_driver_unregister(&sch5627_driver); +} + +MODULE_DESCRIPTION("SMSC SCH5627 Hardware Monitoring Driver"); +MODULE_AUTHOR("Hans de Goede (hdegoede@redhat.com)"); +MODULE_LICENSE("GPL"); + +module_init(sch5627_init); +module_exit(sch5627_exit); |