diff options
| -rw-r--r-- | drivers/mmc/host/s3cmci.c | 12 |
1 files changed, 10 insertions, 2 deletions
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 62d73d3497f..2b483953697 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -450,6 +450,7 @@ static irqreturn_t s3cmci_irq(int irq, void *dev_id) } if (mci_csta & S3C2410_SDICMDSTAT_CMDTIMEOUT) { + dbg(host, dbg_err, "CMDSTAT: error CMDTIMEOUT\n"); cmd->error = -ETIMEDOUT; host->status = "error: command timeout"; goto fail_transfer; @@ -505,12 +506,14 @@ static irqreturn_t s3cmci_irq(int irq, void *dev_id) /* Check for FIFO failure */ if (host->is2440) { if (mci_fsta & S3C2440_SDIFSTA_FIFOFAIL) { + dbg(host, dbg_err, "FIFO failure\n"); host->mrq->data->error = -EILSEQ; host->status = "error: 2440 fifo failure"; goto fail_transfer; } } else { if (mci_dsta & S3C2410_SDIDSTA_FIFOFAIL) { + dbg(host, dbg_err, "FIFO failure\n"); cmd->data->error = -EILSEQ; host->status = "error: fifo failure"; goto fail_transfer; @@ -518,18 +521,21 @@ static irqreturn_t s3cmci_irq(int irq, void *dev_id) } if (mci_dsta & S3C2410_SDIDSTA_RXCRCFAIL) { + dbg(host, dbg_err, "bad data crc (outgoing)\n"); cmd->data->error = -EILSEQ; host->status = "error: bad data crc (outgoing)"; goto fail_transfer; } if (mci_dsta & S3C2410_SDIDSTA_CRCFAIL) { + dbg(host, dbg_err, "bad data crc (incoming)\n"); cmd->data->error = -EILSEQ; host->status = "error: bad data crc (incoming)"; goto fail_transfer; } if (mci_dsta & S3C2410_SDIDSTA_DATATIMEOUT) { + dbg(host, dbg_err, "data timeout\n"); cmd->data->error = -ETIMEDOUT; host->status = "error: data timeout"; goto fail_transfer; @@ -956,8 +962,9 @@ static void s3cmci_send_request(struct mmc_host *mmc) host->dcnt++; if (res) { - cmd->error = -EINVAL; - cmd->data->error = -EINVAL; + dbg(host, dbg_err, "setup data error %d\n", res); + cmd->error = res; + cmd->data->error = res; mmc_request_done(mmc, mrq); return; @@ -969,6 +976,7 @@ static void s3cmci_send_request(struct mmc_host *mmc) res = s3cmci_prepare_pio(host, cmd->data); if (res) { + dbg(host, dbg_err, "data prepare error %d\n", res); cmd->error = res; cmd->data->error = res; |