summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/hwmon/lm637
-rw-r--r--drivers/hwmon/Kconfig11
-rw-r--r--drivers/hwmon/lm63.c16
3 files changed, 25 insertions, 9 deletions
diff --git a/Documentation/hwmon/lm63 b/Documentation/hwmon/lm63
index 31660bf9797..b9843eab1af 100644
--- a/Documentation/hwmon/lm63
+++ b/Documentation/hwmon/lm63
@@ -7,6 +7,11 @@ Supported chips:
Addresses scanned: I2C 0x4c
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/pf/LM/LM63.html
+ * National Semiconductor LM64
+ Prefix: 'lm64'
+ Addresses scanned: I2C 0x18 and 0x4e
+ Datasheet: Publicly available at the National Semiconductor website
+ http://www.national.com/pf/LM/LM64.html
Author: Jean Delvare <khali@linux-fr.org>
@@ -55,3 +60,5 @@ The lm63 driver will not update its values more frequently than every
second; reading them more often will do no harm, but will return 'old'
values.
+The LM64 is effectively an LM63 with GPIO lines. The driver does not
+support these GPIO lines at present.
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 6a9ac754ca5..fa609586c7c 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -447,13 +447,14 @@ config SENSORS_IT87
will be called it87.
config SENSORS_LM63
- tristate "National Semiconductor LM63"
+ tristate "National Semiconductor LM63 and LM64"
depends on I2C
help
- If you say yes here you get support for the National Semiconductor
- LM63 remote diode digital temperature sensor with integrated fan
- control. Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
- motherboard, among others.
+ If you say yes here you get support for the National
+ Semiconductor LM63 and LM64 remote diode digital temperature
+ sensors with integrated fan control. Such chips are found
+ on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
+ others.
This driver can also be built as a module. If so, the module
will be called lm63.
diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c
index bf81aff7051..776aeb3019d 100644
--- a/drivers/hwmon/lm63.c
+++ b/drivers/hwmon/lm63.c
@@ -53,7 +53,7 @@
* Address is fully defined internally and cannot be changed.
*/
-static const unsigned short normal_i2c[] = { 0x4c, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x18, 0x4c, 0x4e, I2C_CLIENT_END };
/*
* The LM63 registers
@@ -131,12 +131,15 @@ static struct lm63_data *lm63_update_device(struct device *dev);
static int lm63_detect(struct i2c_client *client, struct i2c_board_info *info);
static void lm63_init_client(struct i2c_client *client);
+enum chips { lm63, lm64 };
+
/*
* Driver data (common to all clients)
*/
static const struct i2c_device_id lm63_id[] = {
- { "lm63", 0 },
+ { "lm63", lm63 },
+ { "lm64", lm64 },
{ }
};
MODULE_DEVICE_TABLE(i2c, lm63_id);
@@ -422,6 +425,7 @@ static int lm63_detect(struct i2c_client *new_client,
struct i2c_adapter *adapter = new_client->adapter;
u8 man_id, chip_id, reg_config1, reg_config2;
u8 reg_alert_status, reg_alert_mask;
+ int address = new_client->addr;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
@@ -439,7 +443,6 @@ static int lm63_detect(struct i2c_client *new_client,
LM63_REG_ALERT_MASK);
if (man_id != 0x01 /* National Semiconductor */
- || chip_id != 0x41 /* LM63 */
|| (reg_config1 & 0x18) != 0x00
|| (reg_config2 & 0xF8) != 0x00
|| (reg_alert_status & 0x20) != 0x00
@@ -450,7 +453,12 @@ static int lm63_detect(struct i2c_client *new_client,
return -ENODEV;
}
- strlcpy(info->type, "lm63", I2C_NAME_SIZE);
+ if (chip_id == 0x41 && address == 0x4c)
+ strlcpy(info->type, "lm63", I2C_NAME_SIZE);
+ else if (chip_id == 0x51 && (address == 0x18 || address == 0x4e))
+ strlcpy(info->type, "lm64", I2C_NAME_SIZE);
+ else
+ return -ENODEV;
return 0;
}