diff options
| -rw-r--r-- | drivers/ide/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/ide/Makefile | 1 | ||||
| -rw-r--r-- | drivers/ide/it8172.c | 166 | ||||
| -rw-r--r-- | include/linux/pci_ids.h | 1 |
4 files changed, 175 insertions, 0 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 4ee85fcf9aa..3f9503867e6 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -511,6 +511,13 @@ config BLK_DEV_PIIX This allows the kernel to change PIO, DMA and UDMA speeds and to configure the chip to optimum performance. +config BLK_DEV_IT8172 + tristate "IT8172 IDE support" + select BLK_DEV_IDEDMA_PCI + help + This driver adds support for the IDE controller on the + IT8172 System Controller. + config BLK_DEV_IT8213 tristate "IT8213 IDE support" select BLK_DEV_IDEDMA_PCI diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index 410728992e6..c2b9c93f009 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -47,6 +47,7 @@ obj-$(CONFIG_BLK_DEV_SC1200) += sc1200.o obj-$(CONFIG_BLK_DEV_CY82C693) += cy82c693.o obj-$(CONFIG_BLK_DEV_DELKIN) += delkin_cb.o obj-$(CONFIG_BLK_DEV_HPT366) += hpt366.o +obj-$(CONFIG_BLK_DEV_IT8172) += it8172.o obj-$(CONFIG_BLK_DEV_IT8213) += it8213.o obj-$(CONFIG_BLK_DEV_IT821X) += it821x.o obj-$(CONFIG_BLK_DEV_JMICRON) += jmicron.o diff --git a/drivers/ide/it8172.c b/drivers/ide/it8172.c new file mode 100644 index 00000000000..e021078cd06 --- /dev/null +++ b/drivers/ide/it8172.c @@ -0,0 +1,166 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * IT8172 IDE controller support + * + * Copyright (C) 2000 MontaVista Software Inc. + * Copyright (C) 2008 Shane McDonald + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/ioport.h> +#include <linux/pci.h> +#include <linux/ide.h> +#include <linux/init.h> + +#define DRV_NAME "IT8172" + +static void it8172_set_pio_mode(ide_drive_t *drive, const u8 pio) +{ + ide_hwif_t *hwif = drive->hwif; + struct pci_dev *dev = to_pci_dev(hwif->dev); + u16 drive_enables; + u32 drive_timing; + + /* + * The highest value of DIOR/DIOW pulse width and recovery time + * that can be set in the IT8172 is 8 PCI clock cycles. As a result, + * it cannot be configured for PIO mode 0. This table sets these + * parameters to the maximum supported by the IT8172. + */ + static const u8 timings[] = { 0x3f, 0x3c, 0x1b, 0x12, 0x0a }; + + pci_read_config_word(dev, 0x40, &drive_enables); + pci_read_config_dword(dev, 0x44, &drive_timing); + + /* + * Enable port 0x44. The IT8172 spec is confused; it calls + * this register the "Slave IDE Timing Register", but in fact, + * it controls timing for both master and slave drives. + */ + drive_enables |= 0x4000; + + drive_enables &= drive->dn ? 0xc006 : 0xc060; + if (drive->media == ide_disk) + /* enable prefetch */ + drive_enables |= 0x0004 << (drive->dn * 4); + if (ata_id_has_iordy(drive->id)) + /* enable IORDY sample-point */ + drive_enables |= 0x0002 << (drive->dn * 4); + + drive_timing &= drive->dn ? 0x00003f00 : 0x000fc000; + drive_timing |= timings[pio] << (drive->dn * 6 + 8); + + pci_write_config_word(dev, 0x40, drive_enables); + pci_write_config_dword(dev, 0x44, drive_timing); +} + +static void it8172_set_dma_mode(ide_drive_t *drive, const u8 speed) +{ + ide_hwif_t *hwif = drive->hwif; + struct pci_dev *dev = to_pci_dev(hwif->dev); + int a_speed = 3 << (drive->dn * 4); + int u_flag = 1 << drive->dn; + int u_speed = 0; + u8 reg48, reg4a; + + pci_read_config_byte(dev, 0x48, ®48); + pci_read_config_byte(dev, 0x4a, ®4a); + + if (speed >= XFER_UDMA_0) { + u8 udma = speed - XFER_UDMA_0; + u_speed = udma << (drive->dn * 4); + + pci_write_config_byte(dev, 0x48, reg48 | u_flag); + reg4a &= ~a_speed; + pci_write_config_byte(dev, 0x4a, reg4a | u_speed); + } else { + const u8 mwdma_to_pio[] = { 0, 3, 4 }; + u8 pio; + + pci_write_config_byte(dev, 0x48, reg48 & ~u_flag); + pci_write_config_byte(dev, 0x4a, reg4a & ~a_speed); + + pio = mwdma_to_pio[speed - XFER_MW_DMA_0]; + + it8172_set_pio_mode(drive, pio); + } +} + + +static const struct ide_port_ops it8172_port_ops = { + .set_pio_mode = it8172_set_pio_mode, + .set_dma_mode = it8172_set_dma_mode, +}; + +static const struct ide_port_info it8172_port_info __devinitdata = { + .name = DRV_NAME, + .port_ops = &it8172_port_ops, + .enablebits = { {0x41, 0x80, 0x80}, {0x00, 0x00, 0x00} }, + .host_flags = IDE_HFLAG_SINGLE, + .pio_mask = ATA_PIO4 & ~ATA_PIO0, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA2, +}; + +static int __devinit it8172_init_one(struct pci_dev *dev, + const struct pci_device_id *id) +{ + if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE) + return -ENODEV; /* IT8172 is more than an IDE controller */ + return ide_pci_init_one(dev, &it8172_port_info, NULL); +} + +static struct pci_device_id it8172_pci_tbl[] = { + { PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8172), 0 }, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, it8172_pci_tbl); + +static struct pci_driver it8172_pci_driver = { + .name = "IT8172_IDE", + .id_table = it8172_pci_tbl, + .probe = it8172_init_one, + .remove = ide_pci_remove, + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, +}; + +static int __init it8172_ide_init(void) +{ + return ide_pci_register_driver(&it8172_pci_driver); +} + +static void __exit it8172_ide_exit(void) +{ + pci_unregister_driver(&it8172_pci_driver); +} + +module_init(it8172_ide_init); +module_exit(it8172_ide_exit); + +MODULE_AUTHOR("Steve Longerbeam"); +MODULE_DESCRIPTION("PCI driver module for ITE 8172 IDE"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 218c73b1e6d..d543365518a 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1658,6 +1658,7 @@ #define PCI_VENDOR_ID_ROCKWELL 0x127A #define PCI_VENDOR_ID_ITE 0x1283 +#define PCI_DEVICE_ID_ITE_8172 0x8172 #define PCI_DEVICE_ID_ITE_8211 0x8211 #define PCI_DEVICE_ID_ITE_8212 0x8212 #define PCI_DEVICE_ID_ITE_8213 0x8213 |