summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_base.h2
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_config.c51
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_transport.c196
3 files changed, 232 insertions, 17 deletions
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
index 014318fa3b0..93c067f5dbb 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -853,6 +853,8 @@ int mpt2sas_config_set_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
*mpi_reply, Mpi2IOUnitPage1_t *config_page);
int mpt2sas_config_get_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
*mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz);
+int mpt2sas_config_set_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc,
+ Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz);
int mpt2sas_config_get_ioc_pg8(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
*mpi_reply, Mpi2IOCPage8_t *config_page);
int mpt2sas_config_get_expander_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
diff --git a/drivers/scsi/mpt2sas/mpt2sas_config.c b/drivers/scsi/mpt2sas/mpt2sas_config.c
index 594a389c652..411c27d7f78 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_config.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_config.c
@@ -324,7 +324,9 @@ _config_request(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
if (r != 0)
goto out;
if (mpi_request->Action ==
- MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT) {
+ MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT ||
+ mpi_request->Action ==
+ MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM) {
ioc->base_add_sg_single(&mpi_request->PageBufferSGE,
MPT2_CONFIG_COMMON_WRITE_SGLFLAGS | mem.sz,
mem.page_dma);
@@ -882,7 +884,7 @@ mpt2sas_config_get_sas_iounit_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
}
/**
- * mpt2sas_config_get_sas_iounit_pg1 - obtain sas iounit page 0
+ * mpt2sas_config_get_sas_iounit_pg1 - obtain sas iounit page 1
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
@@ -907,7 +909,7 @@ mpt2sas_config_get_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
mpi_request.Header.PageNumber = 1;
- mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE0_PAGEVERSION;
+ mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE1_PAGEVERSION;
mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
@@ -922,6 +924,49 @@ mpt2sas_config_get_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
}
/**
+ * mpt2sas_config_set_sas_iounit_pg1 - send sas iounit page 1
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * @sz: size of buffer passed in config_page
+ * Context: sleep.
+ *
+ * Calling function should call config_get_number_hba_phys prior to
+ * this function, so enough memory is allocated for config_page.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt2sas_config_set_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+ *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz)
+{
+ Mpi2ConfigRequest_t mpi_request;
+ int r;
+
+ memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+ mpi_request.Function = MPI2_FUNCTION_CONFIG;
+ mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+ mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+ mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
+ mpi_request.Header.PageNumber = 1;
+ mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE1_PAGEVERSION;
+ mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
+ r = _config_request(ioc, &mpi_request, mpi_reply,
+ MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+ if (r)
+ goto out;
+
+ mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
+ _config_request(ioc, &mpi_request, mpi_reply,
+ MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
+ mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM;
+ r = _config_request(ioc, &mpi_request, mpi_reply,
+ MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
+ out:
+ return r;
+}
+
+/**
* mpt2sas_config_get_expander_pg0 - obtain expander page 0
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c
index 3a82872bad4..789f9ee7f00 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_transport.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c
@@ -855,6 +855,17 @@ rphy_to_ioc(struct sas_rphy *rphy)
return shost_priv(shost);
}
+static struct _sas_phy *
+_transport_find_local_phy(struct MPT2SAS_ADAPTER *ioc, struct sas_phy *phy)
+{
+ int i;
+
+ for (i = 0; i < ioc->sas_hba.num_phys; i++)
+ if (ioc->sas_hba.phy[i].phy == phy)
+ return(&ioc->sas_hba.phy[i]);
+ return NULL;
+}
+
/**
* _transport_get_linkerrors -
* @phy: The sas phy object
@@ -870,14 +881,8 @@ _transport_get_linkerrors(struct sas_phy *phy)
struct _sas_phy *mpt2sas_phy;
Mpi2ConfigReply_t mpi_reply;
Mpi2SasPhyPage1_t phy_pg1;
- int i;
- for (i = 0, mpt2sas_phy = NULL; i < ioc->sas_hba.num_phys &&
- !mpt2sas_phy; i++) {
- if (ioc->sas_hba.phy[i].phy != phy)
- continue;
- mpt2sas_phy = &ioc->sas_hba.phy[i];
- }
+ mpt2sas_phy = _transport_find_local_phy(ioc, phy);
if (!mpt2sas_phy) /* this phy not on sas_host */
return -EINVAL;
@@ -971,14 +976,8 @@ _transport_phy_reset(struct sas_phy *phy, int hard_reset)
struct _sas_phy *mpt2sas_phy;
Mpi2SasIoUnitControlReply_t mpi_reply;
Mpi2SasIoUnitControlRequest_t mpi_request;
- int i;
- for (i = 0, mpt2sas_phy = NULL; i < ioc->sas_hba.num_phys &&
- !mpt2sas_phy; i++) {
- if (ioc->sas_hba.phy[i].phy != phy)
- continue;
- mpt2sas_phy = &ioc->sas_hba.phy[i];
- }
+ mpt2sas_phy = _transport_find_local_phy(ioc, phy);
if (!mpt2sas_phy) /* this phy not on sas_host */
return -EINVAL;
@@ -1006,6 +1005,173 @@ _transport_phy_reset(struct sas_phy *phy, int hard_reset)
}
/**
+ * _transport_phy_enable - enable/disable phys
+ * @phy: The sas phy object
+ * @enable: enable phy when true
+ *
+ * Only support sas_host direct attached phys.
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_transport_phy_enable(struct sas_phy *phy, int enable)
+{
+ struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy);
+ struct _sas_phy *mpt2sas_phy;
+ Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
+ Mpi2ConfigReply_t mpi_reply;
+ u16 ioc_status;
+ u16 sz;
+ int rc = 0;
+
+ mpt2sas_phy = _transport_find_local_phy(ioc, phy);
+
+ if (!mpt2sas_phy) /* this phy not on sas_host */
+ return -EINVAL;
+
+ /* sas_iounit page 1 */
+ sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys *
+ sizeof(Mpi2SasIOUnit1PhyData_t));
+ sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
+ if (!sas_iounit_pg1) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ rc = -ENOMEM;
+ goto out;
+ }
+ if ((mpt2sas_config_get_sas_iounit_pg1(ioc, &mpi_reply,
+ sas_iounit_pg1, sz))) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ rc = -ENXIO;
+ goto out;
+ }
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ rc = -EIO;
+ goto out;
+ }
+
+ if (enable)
+ sas_iounit_pg1->PhyData[mpt2sas_phy->phy_id].PhyFlags
+ &= ~MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE;
+ else
+ sas_iounit_pg1->PhyData[mpt2sas_phy->phy_id].PhyFlags
+ |= MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE;
+
+ mpt2sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1, sz);
+
+ out:
+ kfree(sas_iounit_pg1);
+ return rc;
+}
+
+/**
+ * _transport_phy_speed - set phy min/max link rates
+ * @phy: The sas phy object
+ * @rates: rates defined in sas_phy_linkrates
+ *
+ * Only support sas_host direct attached phys.
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_transport_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates)
+{
+ struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy);
+ struct _sas_phy *mpt2sas_phy;
+ Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
+ Mpi2SasPhyPage0_t phy_pg0;
+ Mpi2ConfigReply_t mpi_reply;
+ u16 ioc_status;
+ u16 sz;
+ int i;
+ int rc = 0;
+
+ mpt2sas_phy = _transport_find_local_phy(ioc, phy);
+
+ if (!mpt2sas_phy) /* this phy not on sas_host */
+ return -EINVAL;
+
+ if (!rates->minimum_linkrate)
+ rates->minimum_linkrate = phy->minimum_linkrate;
+ else if (rates->minimum_linkrate < phy->minimum_linkrate_hw)
+ rates->minimum_linkrate = phy->minimum_linkrate_hw;
+
+ if (!rates->maximum_linkrate)
+ rates->maximum_linkrate = phy->maximum_linkrate;
+ else if (rates->maximum_linkrate > phy->maximum_linkrate_hw)
+ rates->maximum_linkrate = phy->maximum_linkrate_hw;
+
+ /* sas_iounit page 1 */
+ sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys *
+ sizeof(Mpi2SasIOUnit1PhyData_t));
+ sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
+ if (!sas_iounit_pg1) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ rc = -ENOMEM;
+ goto out;
+ }
+ if ((mpt2sas_config_get_sas_iounit_pg1(ioc, &mpi_reply,
+ sas_iounit_pg1, sz))) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ rc = -ENXIO;
+ goto out;
+ }
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ rc = -EIO;
+ goto out;
+ }
+
+ for (i = 0; i < ioc->sas_hba.num_phys; i++) {
+ if (mpt2sas_phy->phy_id != i) {
+ sas_iounit_pg1->PhyData[i].MaxMinLinkRate =
+ (ioc->sas_hba.phy[i].phy->minimum_linkrate +
+ (ioc->sas_hba.phy[i].phy->maximum_linkrate << 4));
+ } else {
+ sas_iounit_pg1->PhyData[i].MaxMinLinkRate =
+ (rates->minimum_linkrate +
+ (rates->maximum_linkrate << 4));
+ }
+ }
+
+ if (mpt2sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1,
+ sz)) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ rc = -ENXIO;
+ goto out;
+ }
+
+ /* link reset */
+ _transport_phy_reset(phy, 0);
+
+ /* read phy page 0, then update the rates in the sas transport phy */
+ if (!mpt2sas_config_get_phy_pg0(ioc, &mpi_reply, &phy_pg0,
+ mpt2sas_phy->phy_id)) {
+ phy->minimum_linkrate = _transport_convert_phy_link_rate(
+ phy_pg0.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK);
+ phy->maximum_linkrate = _transport_convert_phy_link_rate(
+ phy_pg0.ProgrammedLinkRate >> 4);
+ phy->negotiated_linkrate = _transport_convert_phy_link_rate(
+ phy_pg0.NegotiatedLinkRate &
+ MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL);
+ }
+
+ out:
+ kfree(sas_iounit_pg1);
+ return rc;
+}
+
+
+/**
* _transport_smp_handler - transport portal for smp passthru
* @shost: shost object
* @rphy: sas transport rphy object
@@ -1207,6 +1373,8 @@ struct sas_function_template mpt2sas_transport_functions = {
.get_enclosure_identifier = _transport_get_enclosure_identifier,
.get_bay_identifier = _transport_get_bay_identifier,
.phy_reset = _transport_phy_reset,
+ .phy_enable = _transport_phy_enable,
+ .set_phy_speed = _transport_phy_speed,
.smp_handler = _transport_smp_handler,
};
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-14 03:46:12 +0000