diff options
| -rw-r--r-- | drivers/scsi/libata-core.c | 187 | ||||
| -rw-r--r-- | include/linux/libata.h | 8 |
2 files changed, 13 insertions, 182 deletions
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 01f2c59536b..30a6020c512 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1479,31 +1479,21 @@ static int ata_bus_probe(struct ata_port *ap) down_xfermask = 0; /* reset and determine device classes */ - for (i = 0; i < ATA_MAX_DEVICES; i++) - classes[i] = ATA_DEV_UNKNOWN; + ap->ops->phy_reset(ap); - if (ap->ops->probe_reset) { - rc = ap->ops->probe_reset(ap, classes); - if (rc) { - ata_port_printk(ap, KERN_ERR, - "reset failed (errno=%d)\n", rc); - return rc; - } - } else { - ap->ops->phy_reset(ap); + for (i = 0; i < ATA_MAX_DEVICES; i++) { + dev = &ap->device[i]; - for (i = 0; i < ATA_MAX_DEVICES; i++) { - if (!(ap->flags & ATA_FLAG_DISABLED)) - classes[i] = ap->device[i].class; - ap->device[i].class = ATA_DEV_UNKNOWN; - } + if (!(ap->flags & ATA_FLAG_DISABLED) && + dev->class != ATA_DEV_UNKNOWN) + classes[dev->devno] = dev->class; + else + classes[dev->devno] = ATA_DEV_NONE; - ata_port_probe(ap); + dev->class = ATA_DEV_UNKNOWN; } - for (i = 0; i < ATA_MAX_DEVICES; i++) - if (classes[i] == ATA_DEV_UNKNOWN) - classes[i] = ATA_DEV_NONE; + ata_port_probe(ap); /* after the reset the device state is PIO 0 and the controller state is undefined. Record the mode */ @@ -2610,37 +2600,11 @@ int ata_std_prereset(struct ata_port *ap) } /** - * ata_std_probeinit - initialize probing - * @ap: port to be probed - * - * @ap is about to be probed. Initialize it. This function is - * to be used as standard callback for ata_drive_probe_reset(). - * - * NOTE!!! Do not use this function as probeinit if a low level - * driver implements only hardreset. Just pass NULL as probeinit - * in that case. Using this function is probably okay but doing - * so makes reset sequence different from the original - * ->phy_reset implementation and Jeff nervous. :-P - */ -void ata_std_probeinit(struct ata_port *ap) -{ - static const unsigned long deb_timing[] = { 5, 100, 5000 }; - - /* resume link */ - sata_phy_resume(ap, deb_timing); - - /* wait for device */ - if (ata_port_online(ap)) - ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); -} - -/** * ata_std_softreset - reset host port via ATA SRST * @ap: port to reset * @classes: resulting classes of attached devices * - * Reset host port using ATA SRST. This function is to be used - * as standard callback for ata_drive_*_reset() functions. + * Reset host port using ATA SRST. * * LOCKING: * Kernel thread context (may sleep) @@ -2695,8 +2659,6 @@ int ata_std_softreset(struct ata_port *ap, unsigned int *classes) * @class: resulting class of attached device * * SATA phy-reset host port using DET bits of SControl register. - * This function is to be used as standard callback for - * ata_drive_*_reset(). * * LOCKING: * Kernel thread context (may sleep) @@ -2775,9 +2737,6 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class) * the device might have been reset more than once using * different reset methods before postreset is invoked. * - * This function is to be used as standard callback for - * ata_drive_*_reset(). - * * LOCKING: * Kernel thread context (may sleep) */ @@ -2824,32 +2783,6 @@ void ata_std_postreset(struct ata_port *ap, unsigned int *classes) DPRINTK("EXIT\n"); } -/** - * ata_std_probe_reset - standard probe reset method - * @ap: prot to perform probe-reset - * @classes: resulting classes of attached devices - * - * The stock off-the-shelf ->probe_reset method. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, -errno otherwise. - */ -int ata_std_probe_reset(struct ata_port *ap, unsigned int *classes) -{ - ata_reset_fn_t hardreset; - - hardreset = NULL; - if (sata_scr_valid(ap)) - hardreset = sata_std_hardreset; - - return ata_drive_probe_reset(ap, ata_std_probeinit, - ata_std_softreset, hardreset, - ata_std_postreset, classes); -} - int ata_do_reset(struct ata_port *ap, ata_reset_fn_t reset, unsigned int *classes) { @@ -2879,97 +2812,6 @@ int ata_do_reset(struct ata_port *ap, ata_reset_fn_t reset, } /** - * ata_drive_probe_reset - Perform probe reset with given methods - * @ap: port to reset - * @probeinit: probeinit method (can be NULL) - * @softreset: softreset method (can be NULL) - * @hardreset: hardreset method (can be NULL) - * @postreset: postreset method (can be NULL) - * @classes: resulting classes of attached devices - * - * Reset the specified port and classify attached devices using - * given methods. This function prefers softreset but tries all - * possible reset sequences to reset and classify devices. This - * function is intended to be used for constructing ->probe_reset - * callback by low level drivers. - * - * Reset methods should follow the following rules. - * - * - Return 0 on sucess, -errno on failure. - * - If classification is supported, fill classes[] with - * recognized class codes. - * - If classification is not supported, leave classes[] alone. - * - * LOCKING: - * Kernel thread context (may sleep) - * - * RETURNS: - * 0 on success, -EINVAL if no reset method is avaliable, -ENODEV - * if classification fails, and any error code from reset - * methods. - */ -int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit, - ata_reset_fn_t softreset, ata_reset_fn_t hardreset, - ata_postreset_fn_t postreset, unsigned int *classes) -{ - int rc = -EINVAL; - - ata_eh_freeze_port(ap); - - if (probeinit) - probeinit(ap); - - if (softreset && !sata_set_spd_needed(ap)) { - rc = ata_do_reset(ap, softreset, classes); - if (rc == 0 && classes[0] != ATA_DEV_UNKNOWN) - goto done; - ata_port_printk(ap, KERN_INFO, "softreset failed, " - "will try hardreset in 5 secs\n"); - ssleep(5); - } - - if (!hardreset) - goto done; - - while (1) { - rc = ata_do_reset(ap, hardreset, classes); - if (rc == 0) { - if (classes[0] != ATA_DEV_UNKNOWN) - goto done; - break; - } - - if (sata_down_spd_limit(ap)) - goto done; - - ata_port_printk(ap, KERN_INFO, "hardreset failed, " - "will retry in 5 secs\n"); - ssleep(5); - } - - if (softreset) { - ata_port_printk(ap, KERN_INFO, - "hardreset succeeded without classification, " - "will retry softreset in 5 secs\n"); - ssleep(5); - - rc = ata_do_reset(ap, softreset, classes); - } - - done: - if (rc == 0) { - if (postreset) - postreset(ap, classes); - - ata_eh_thaw_port(ap); - - if (classes[0] == ATA_DEV_UNKNOWN) - rc = -ENODEV; - } - return rc; -} - -/** * ata_dev_same_device - Determine whether new ID matches configured device * @dev: device to compare against * @new_class: class of the new device @@ -5419,7 +5261,7 @@ static struct ata_port * ata_host_add(const struct ata_probe_ent *ent, DPRINTK("ENTER\n"); - if (!ent->port_ops->probe_reset && !ent->port_ops->error_handler && + if (!ent->port_ops->error_handler && !(ent->host_flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST))) { printk(KERN_ERR "ata%u: no reset mechanism available\n", port_no); @@ -5551,7 +5393,7 @@ int ata_device_add(const struct ata_probe_ent *ent) */ } - if (!ap->ops->probe_reset) { + if (ap->ops->error_handler) { unsigned long flags; ata_port_probe(ap); @@ -5998,13 +5840,10 @@ EXPORT_SYMBOL_GPL(sata_phy_resume); EXPORT_SYMBOL_GPL(sata_phy_reset); EXPORT_SYMBOL_GPL(__sata_phy_reset); EXPORT_SYMBOL_GPL(ata_bus_reset); -EXPORT_SYMBOL_GPL(ata_std_probeinit); EXPORT_SYMBOL_GPL(ata_std_prereset); EXPORT_SYMBOL_GPL(ata_std_softreset); EXPORT_SYMBOL_GPL(sata_std_hardreset); EXPORT_SYMBOL_GPL(ata_std_postreset); -EXPORT_SYMBOL_GPL(ata_std_probe_reset); -EXPORT_SYMBOL_GPL(ata_drive_probe_reset); EXPORT_SYMBOL_GPL(ata_dev_revalidate); EXPORT_SYMBOL_GPL(ata_dev_classify); EXPORT_SYMBOL_GPL(ata_dev_pair); diff --git a/include/linux/libata.h b/include/linux/libata.h index f11ba2715be..a2a33a90291 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -303,7 +303,6 @@ struct ata_queued_cmd; /* typedefs */ typedef void (*ata_qc_cb_t) (struct ata_queued_cmd *qc); -typedef void (*ata_probeinit_fn_t)(struct ata_port *ap); typedef int (*ata_prereset_fn_t)(struct ata_port *ap); typedef int (*ata_reset_fn_t)(struct ata_port *ap, unsigned int *classes); typedef void (*ata_postreset_fn_t)(struct ata_port *ap, unsigned int *classes); @@ -553,7 +552,6 @@ struct ata_port_operations { void (*phy_reset) (struct ata_port *ap); /* obsolete */ void (*set_mode) (struct ata_port *ap); - int (*probe_reset) (struct ata_port *ap, unsigned int *classes); void (*post_set_mode) (struct ata_port *ap); @@ -628,11 +626,6 @@ extern void ata_bus_reset(struct ata_port *ap); extern int sata_set_spd(struct ata_port *ap); extern int sata_phy_debounce(struct ata_port *ap, const unsigned long *param); extern int sata_phy_resume(struct ata_port *ap, const unsigned long *param); -extern int ata_drive_probe_reset(struct ata_port *ap, - ata_probeinit_fn_t probeinit, - ata_reset_fn_t softreset, ata_reset_fn_t hardreset, - ata_postreset_fn_t postreset, unsigned int *classes); -extern void ata_std_probeinit(struct ata_port *ap); extern int ata_std_prereset(struct ata_port *ap); extern int ata_std_softreset(struct ata_port *ap, unsigned int *classes); extern int sata_std_hardreset(struct ata_port *ap, unsigned int *class); @@ -688,7 +681,6 @@ extern void ata_std_dev_select (struct ata_port *ap, unsigned int device); extern u8 ata_check_status(struct ata_port *ap); extern u8 ata_altstatus(struct ata_port *ap); extern void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf); -extern int ata_std_probe_reset(struct ata_port *ap, unsigned int *classes); extern int ata_port_start (struct ata_port *ap); extern void ata_port_stop (struct ata_port *ap); extern void ata_host_stop (struct ata_host_set *host_set); |