summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/net/wireless/brcm80211/brcmsmac/aiutils.c56
-rw-r--r--drivers/net/wireless/brcm80211/brcmsmac/aiutils.h4
-rw-r--r--drivers/net/wireless/brcm80211/brcmsmac/main.c30
3 files changed, 31 insertions, 59 deletions
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c
index 1b7b17284f5..b64fbc0b37d 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c
@@ -761,39 +761,6 @@ u16 ai_clkctl_fast_pwrup_delay(struct si_pub *sih)
return fpdelay;
}
-/* clk control mechanism through chipcommon, no policy checking */
-static bool _ai_clkctl_cc(struct si_info *sii, uint mode)
-{
- struct bcma_device *cc;
- u32 scc;
-
- cc = ai_findcore(&sii->pub, BCMA_CORE_CHIPCOMMON, 0);
-
- switch (mode) {
- case CLK_FAST: /* FORCEHT, fast (pll) clock */
- bcma_set32(cc, CHIPCREGOFFS(clk_ctl_st), CCS_FORCEHT);
-
- /* wait for the PLL */
- if (ai_get_cccaps(&sii->pub) & CC_CAP_PMU) {
- u32 htavail = CCS_HTAVAIL;
- SPINWAIT(((bcma_read32(cc, CHIPCREGOFFS(clk_ctl_st)) &
- htavail) == 0), PMU_MAX_TRANSITION_DLY);
- } else {
- udelay(PLL_DELAY);
- }
- break;
-
- case CLK_DYNAMIC: /* enable dynamic clock control */
- bcma_mask32(cc, CHIPCREGOFFS(clk_ctl_st), ~CCS_FORCEHT);
- break;
-
- default:
- break;
- }
-
- return mode == CLK_FAST;
-}
-
/*
* clock control policy function throught chipcommon
*
@@ -802,26 +769,32 @@ static bool _ai_clkctl_cc(struct si_info *sii, uint mode)
* this is a wrapper over the next internal function
* to allow flexible policy settings for outside caller
*/
-bool ai_clkctl_cc(struct si_pub *sih, uint mode)
+bool ai_clkctl_cc(struct si_pub *sih, enum bcma_clkmode mode)
{
struct si_info *sii;
+ struct bcma_device *cc;
sii = (struct si_info *)sih;
if (PCI_FORCEHT(sih))
- return mode == CLK_FAST;
+ return mode == BCMA_CLKMODE_FAST;
- return _ai_clkctl_cc(sii, mode);
+ cc = ai_findcore(&sii->pub, BCMA_CORE_CHIPCOMMON, 0);
+ bcma_core_set_clockmode(cc, mode);
+ return mode == BCMA_CLKMODE_FAST;
}
void ai_pci_up(struct si_pub *sih)
{
struct si_info *sii;
+ struct bcma_device *cc;
sii = (struct si_info *)sih;
- if (PCI_FORCEHT(sih))
- _ai_clkctl_cc(sii, CLK_FAST);
+ if (PCI_FORCEHT(sih)) {
+ cc = ai_findcore(&sii->pub, BCMA_CORE_CHIPCOMMON, 0);
+ bcma_core_set_clockmode(cc, BCMA_CLKMODE_FAST);
+ }
if (PCIE(sih))
pcicore_up(sii->pch, SI_PCIUP);
@@ -832,12 +805,15 @@ void ai_pci_up(struct si_pub *sih)
void ai_pci_down(struct si_pub *sih)
{
struct si_info *sii;
+ struct bcma_device *cc;
sii = (struct si_info *)sih;
/* release FORCEHT since chip is going to "down" state */
- if (PCI_FORCEHT(sih))
- _ai_clkctl_cc(sii, CLK_DYNAMIC);
+ if (PCI_FORCEHT(sih)) {
+ cc = ai_findcore(&sii->pub, BCMA_CORE_CHIPCOMMON, 0);
+ bcma_core_set_clockmode(cc, BCMA_CLKMODE_DYNAMIC);
+ }
pcicore_down(sii->pch, SI_PCIDOWN);
}
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h
index 62c3a636014..14ae9f58a90 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h
+++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h
@@ -113,10 +113,6 @@
#define XTAL 0x1 /* primary crystal oscillator (2050) */
#define PLL 0x2 /* main chip pll */
-/* clkctl clk mode */
-#define CLK_FAST 0 /* force fast (pll) clock */
-#define CLK_DYNAMIC 2 /* enable dynamic clock control */
-
/* GPIO usage priorities */
#define GPIO_DRV_PRIORITY 0 /* Driver */
#define GPIO_APP_PRIORITY 1 /* Application */
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c
index 0c66bb726ae..71d7f394c8a 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
@@ -1219,7 +1219,7 @@ static void brcms_b_wait_for_wake(struct brcms_hardware *wlc_hw)
}
/* control chip clock to save power, enable dynamic clock or force fast clock */
-static void brcms_b_clkctl_clk(struct brcms_hardware *wlc_hw, uint mode)
+static void brcms_b_clkctl_clk(struct brcms_hardware *wlc_hw, enum bcma_clkmode mode)
{
if (ai_get_cccaps(wlc_hw->sih) & CC_CAP_PMU) {
/* new chips with PMU, CCS_FORCEHT will distribute the HT clock
@@ -1229,7 +1229,7 @@ static void brcms_b_clkctl_clk(struct brcms_hardware *wlc_hw, uint mode)
*/
if (wlc_hw->clk) {
- if (mode == CLK_FAST) {
+ if (mode == BCMA_CLKMODE_FAST) {
bcma_set32(wlc_hw->d11core,
D11REGOFFS(clk_ctl_st),
CCS_FORCEHT);
@@ -1260,7 +1260,7 @@ static void brcms_b_clkctl_clk(struct brcms_hardware *wlc_hw, uint mode)
~CCS_FORCEHT);
}
}
- wlc_hw->forcefastclk = (mode == CLK_FAST);
+ wlc_hw->forcefastclk = (mode == BCMA_CLKMODE_FAST);
} else {
/* old chips w/o PMU, force HT through cc,
@@ -1567,7 +1567,7 @@ void brcms_b_bw_set(struct brcms_hardware *wlc_hw, u16 bw)
/* request FAST clock if not on */
fastclk = wlc_hw->forcefastclk;
if (!fastclk)
- brcms_b_clkctl_clk(wlc_hw, CLK_FAST);
+ brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_FAST);
wlc_phy_bw_state_set(wlc_hw->band->pi, bw);
@@ -1576,7 +1576,7 @@ void brcms_b_bw_set(struct brcms_hardware *wlc_hw, u16 bw)
/* restore the clk */
if (!fastclk)
- brcms_b_clkctl_clk(wlc_hw, CLK_DYNAMIC);
+ brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_DYNAMIC);
}
static void brcms_b_upd_synthpu(struct brcms_hardware *wlc_hw)
@@ -1994,7 +1994,7 @@ void brcms_b_corereset(struct brcms_hardware *wlc_hw, u32 flags)
/* request FAST clock if not on */
fastclk = wlc_hw->forcefastclk;
if (!fastclk)
- brcms_b_clkctl_clk(wlc_hw, CLK_FAST);
+ brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_FAST);
/* reset the dma engines except first time thru */
if (bcma_core_is_enabled(wlc_hw->d11core)) {
@@ -2043,7 +2043,7 @@ void brcms_b_corereset(struct brcms_hardware *wlc_hw, u32 flags)
brcms_c_mctrl_reset(wlc_hw);
if (ai_get_cccaps(wlc_hw->sih) & CC_CAP_PMU)
- brcms_b_clkctl_clk(wlc_hw, CLK_FAST);
+ brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_FAST);
brcms_b_phy_reset(wlc_hw);
@@ -2055,7 +2055,7 @@ void brcms_b_corereset(struct brcms_hardware *wlc_hw, u32 flags)
/* restore the clk setting */
if (!fastclk)
- brcms_b_clkctl_clk(wlc_hw, CLK_DYNAMIC);
+ brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_DYNAMIC);
}
/* txfifo sizes needs to be modified(increased) since the newer cores
@@ -3361,7 +3361,7 @@ static brcms_b_init(struct brcms_hardware *wlc_hw, u16 chanspec) {
/* request FAST clock if not on */
fastclk = wlc_hw->forcefastclk;
if (!fastclk)
- brcms_b_clkctl_clk(wlc_hw, CLK_FAST);
+ brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_FAST);
/* disable interrupts */
macintmask = brcms_intrsoff(wlc->wl);
@@ -3395,7 +3395,7 @@ static brcms_b_init(struct brcms_hardware *wlc_hw, u16 chanspec) {
/* restore the clk */
if (!fastclk)
- brcms_b_clkctl_clk(wlc_hw, CLK_DYNAMIC);
+ brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_DYNAMIC);
}
static void brcms_c_set_phy_chanspec(struct brcms_c_info *wlc,
@@ -4491,7 +4491,7 @@ static int brcms_b_attach(struct brcms_c_info *wlc, struct bcma_device *core,
* is still false; But it will be called again inside wlc_corereset,
* after d11 is out of reset.
*/
- brcms_b_clkctl_clk(wlc_hw, CLK_FAST);
+ brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_FAST);
brcms_b_corereset(wlc_hw, BRCMS_USE_COREFLAGS);
if (!brcms_b_validate_chip_access(wlc_hw)) {
@@ -5019,7 +5019,7 @@ static void brcms_b_hw_up(struct brcms_hardware *wlc_hw)
*/
brcms_b_xtal(wlc_hw, ON);
ai_clkctl_init(wlc_hw->sih);
- brcms_b_clkctl_clk(wlc_hw, CLK_FAST);
+ brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_FAST);
ai_pci_fixcfg(wlc_hw->sih);
@@ -5058,7 +5058,7 @@ static int brcms_b_up_prep(struct brcms_hardware *wlc_hw)
*/
brcms_b_xtal(wlc_hw, ON);
ai_clkctl_init(wlc_hw->sih);
- brcms_b_clkctl_clk(wlc_hw, CLK_FAST);
+ brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_FAST);
/*
* Configure pci/pcmcia here instead of in brcms_c_attach()
@@ -5095,7 +5095,7 @@ static int brcms_b_up_finish(struct brcms_hardware *wlc_hw)
wlc_phy_hw_state_upd(wlc_hw->band->pi, true);
/* FULLY enable dynamic power control and d11 core interrupt */
- brcms_b_clkctl_clk(wlc_hw, CLK_DYNAMIC);
+ brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_DYNAMIC);
brcms_intrson(wlc_hw->wlc->wl);
return 0;
}
@@ -5236,7 +5236,7 @@ static int brcms_b_bmac_down_prep(struct brcms_hardware *wlc_hw)
brcms_intrsoff(wlc_hw->wlc->wl);
/* ensure we're running on the pll clock again */
- brcms_b_clkctl_clk(wlc_hw, CLK_FAST);
+ brcms_b_clkctl_clk(wlc_hw, BCMA_CLKMODE_FAST);
}
/* down phy at the last of this stage */
callbacks += wlc_phy_down(wlc_hw->band->pi);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-25 02:59:46 +0000