diff options
| -rw-r--r-- | drivers/char/Kconfig | 172 | ||||
| -rw-r--r-- | drivers/char/Makefile | 11 | ||||
| -rw-r--r-- | drivers/tty/Kconfig | 171 | ||||
| -rw-r--r-- | drivers/tty/Makefile | 13 | ||||
| -rw-r--r-- | drivers/tty/amiserial.c (renamed from drivers/char/amiserial.c) | 0 | ||||
| -rw-r--r-- | drivers/tty/bfin_jtag_comm.c (renamed from drivers/char/bfin_jtag_comm.c) | 0 | ||||
| -rw-r--r-- | drivers/tty/cyclades.c (renamed from drivers/char/cyclades.c) | 0 | ||||
| -rw-r--r-- | drivers/tty/isicom.c (renamed from drivers/char/isicom.c) | 0 | ||||
| -rw-r--r-- | drivers/tty/moxa.c (renamed from drivers/char/moxa.c) | 0 | ||||
| -rw-r--r-- | drivers/tty/moxa.h (renamed from drivers/char/moxa.h) | 0 | ||||
| -rw-r--r-- | drivers/tty/mxser.c (renamed from drivers/char/mxser.c) | 0 | ||||
| -rw-r--r-- | drivers/tty/mxser.h (renamed from drivers/char/mxser.h) | 0 | ||||
| -rw-r--r-- | drivers/tty/nozomi.c (renamed from drivers/char/nozomi.c) | 0 | ||||
| -rw-r--r-- | drivers/tty/rocket.c (renamed from drivers/char/rocket.c) | 0 | ||||
| -rw-r--r-- | drivers/tty/rocket.h (renamed from drivers/char/rocket.h) | 0 | ||||
| -rw-r--r-- | drivers/tty/rocket_int.h (renamed from drivers/char/rocket_int.h) | 0 | ||||
| -rw-r--r-- | drivers/tty/synclink.c (renamed from drivers/char/synclink.c) | 0 | ||||
| -rw-r--r-- | drivers/tty/synclink_gt.c (renamed from drivers/char/synclink_gt.c) | 0 | ||||
| -rw-r--r-- | drivers/tty/synclinkmp.c (renamed from drivers/char/synclinkmp.c) | 0 |
19 files changed, 184 insertions, 183 deletions
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 9b9ab867f50..1adfac6a7b0 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -15,36 +15,6 @@ config DEVKMEM kind of kernel debugging operations. When in doubt, say "N". -config BFIN_JTAG_COMM - tristate "Blackfin JTAG Communication" - depends on BLACKFIN - help - Add support for emulating a TTY device over the Blackfin JTAG. - - To compile this driver as a module, choose M here: the - module will be called bfin_jtag_comm. - -config BFIN_JTAG_COMM_CONSOLE - bool "Console on Blackfin JTAG" - depends on BFIN_JTAG_COMM=y - -config SERIAL_NONSTANDARD - bool "Non-standard serial port support" - depends on HAS_IOMEM - ---help--- - Say Y here if you have any non-standard serial boards -- boards - which aren't supported using the standard "dumb" serial driver. - This includes intelligent serial boards such as Cyclades, - Digiboards, etc. These are usually used for systems that need many - serial ports because they serve many terminals or dial-in - connections. - - Note that the answer to this question won't directly affect the - kernel: saying N will just cause the configurator to skip all - the questions about non-standard serial boards. - - Most people can say N here. - config COMPUTONE tristate "Computone IntelliPort Plus serial support" depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) @@ -60,50 +30,6 @@ config COMPUTONE To compile this driver as module, choose M here: the module will be called ip2. -config ROCKETPORT - tristate "Comtrol RocketPort support" - depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) - help - This driver supports Comtrol RocketPort and RocketModem PCI boards. - These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or - modems. For information about the RocketPort/RocketModem boards - and this driver read <file:Documentation/serial/rocket.txt>. - - To compile this driver as a module, choose M here: the - module will be called rocket. - - If you want to compile this driver into the kernel, say Y here. If - you don't have a Comtrol RocketPort/RocketModem card installed, say N. - -config CYCLADES - tristate "Cyclades async mux support" - depends on SERIAL_NONSTANDARD && (PCI || ISA) - select FW_LOADER - ---help--- - This driver supports Cyclades Z and Y multiserial boards. - You would need something like this to connect more than two modems to - your Linux box, for instance in order to become a dial-in server. - - For information about the Cyclades-Z card, read - <file:Documentation/serial/README.cycladesZ>. - - To compile this driver as a module, choose M here: the - module will be called cyclades. - - If you haven't heard about it, it's safe to say N. - -config CYZ_INTR - bool "Cyclades-Z interrupt mode operation (EXPERIMENTAL)" - depends on EXPERIMENTAL && CYCLADES - help - The Cyclades-Z family of multiport cards allows 2 (two) driver op - modes: polling and interrupt. In polling mode, the driver will check - the status of the Cyclades-Z ports every certain amount of time - (which is called polling cycle and is configurable). In interrupt - mode, it will use an interrupt line (IRQ) in order to check the - status of the Cyclades-Z ports. The default op mode is polling. If - unsure, say N. - config DIGIEPCA tristate "Digiboard Intelligent Async Support" depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) @@ -119,94 +45,6 @@ config DIGIEPCA To compile this driver as a module, choose M here: the module will be called epca. -config MOXA_INTELLIO - tristate "Moxa Intellio support" - depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) - select FW_LOADER - help - Say Y here if you have a Moxa Intellio multiport serial card. - - To compile this driver as a module, choose M here: the - module will be called moxa. - -config MOXA_SMARTIO - tristate "Moxa SmartIO support v. 2.0" - depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) - help - Say Y here if you have a Moxa SmartIO multiport serial card and/or - want to help develop a new version of this driver. - - This is upgraded (1.9.1) driver from original Moxa drivers with - changes finally resulting in PCI probing. - - This driver can also be built as a module. The module will be called - mxser. If you want to do that, say M here. - -config ISI - tristate "Multi-Tech multiport card support (EXPERIMENTAL)" - depends on SERIAL_NONSTANDARD && PCI - select FW_LOADER - help - This is a driver for the Multi-Tech cards which provide several - serial ports. The driver is experimental and can currently only be - built as a module. The module will be called isicom. - If you want to do that, choose M here. - -config SYNCLINK - tristate "Microgate SyncLink card support" - depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API - help - Provides support for the SyncLink ISA and PCI multiprotocol serial - adapters. These adapters support asynchronous and HDLC bit - synchronous communication up to 10Mbps (PCI adapter). - - This driver can only be built as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called synclink. If you want to do that, say M - here. - -config SYNCLINKMP - tristate "SyncLink Multiport support" - depends on SERIAL_NONSTANDARD && PCI - help - Enable support for the SyncLink Multiport (2 or 4 ports) - serial adapter, running asynchronous and HDLC communications up - to 2.048Mbps. Each ports is independently selectable for - RS-232, V.35, RS-449, RS-530, and X.21 - - This driver may be built as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called synclinkmp. If you want to do that, say M - here. - -config SYNCLINK_GT - tristate "SyncLink GT/AC support" - depends on SERIAL_NONSTANDARD && PCI - help - Support for SyncLink GT and SyncLink AC families of - synchronous and asynchronous serial adapters - manufactured by Microgate Systems, Ltd. (www.microgate.com) - -config N_HDLC - tristate "HDLC line discipline support" - depends on SERIAL_NONSTANDARD - help - Allows synchronous HDLC communications with tty device drivers that - support synchronous HDLC such as the Microgate SyncLink adapter. - - This driver can be built as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called n_hdlc. If you want to do that, say M - here. - -config N_GSM - tristate "GSM MUX line discipline support (EXPERIMENTAL)" - depends on EXPERIMENTAL - depends on NET - help - This line discipline provides support for the GSM MUX protocol and - presents the mux as a set of 61 individual tty devices. - config RISCOM8 tristate "SDL RISCom/8 card support" depends on SERIAL_NONSTANDARD @@ -296,16 +134,6 @@ config ISTALLION To compile this driver as a module, choose M here: the module will be called istallion. -config NOZOMI - tristate "HSDPA Broadband Wireless Data Card - Globe Trotter" - depends on PCI && EXPERIMENTAL - help - If you have a HSDPA driver Broadband Wireless Data Card - - Globe Trotter PCMCIA card, say Y here. - - To compile this driver as a module, choose M here, the module - will be called nozomi. - config A2232 tristate "Commodore A2232 serial support (EXPERIMENTAL)" depends on EXPERIMENTAL && ZORRO && BROKEN diff --git a/drivers/char/Makefile b/drivers/char/Makefile index 5bc765d4c3c..f5dc7c9bce6 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -5,29 +5,18 @@ obj-y += mem.o random.o obj-$(CONFIG_TTY_PRINTK) += ttyprintk.o obj-y += misc.o -obj-$(CONFIG_BFIN_JTAG_COMM) += bfin_jtag_comm.o obj-$(CONFIG_MVME147_SCC) += generic_serial.o vme_scc.o obj-$(CONFIG_MVME162_SCC) += generic_serial.o vme_scc.o obj-$(CONFIG_BVME6000_SCC) += generic_serial.o vme_scc.o -obj-$(CONFIG_ROCKETPORT) += rocket.o obj-$(CONFIG_SERIAL167) += serial167.o -obj-$(CONFIG_CYCLADES) += cyclades.o obj-$(CONFIG_STALLION) += stallion.o obj-$(CONFIG_ISTALLION) += istallion.o -obj-$(CONFIG_NOZOMI) += nozomi.o obj-$(CONFIG_DIGIEPCA) += epca.o obj-$(CONFIG_SPECIALIX) += specialix.o -obj-$(CONFIG_MOXA_INTELLIO) += moxa.o obj-$(CONFIG_A2232) += ser_a2232.o generic_serial.o obj-$(CONFIG_ATARI_DSP56K) += dsp56k.o -obj-$(CONFIG_MOXA_SMARTIO) += mxser.o obj-$(CONFIG_COMPUTONE) += ip2/ obj-$(CONFIG_RISCOM8) += riscom8.o -obj-$(CONFIG_ISI) += isicom.o -obj-$(CONFIG_SYNCLINK) += synclink.o -obj-$(CONFIG_SYNCLINKMP) += synclinkmp.o -obj-$(CONFIG_SYNCLINK_GT) += synclink_gt.o -obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o obj-$(CONFIG_SX) += sx.o generic_serial.o obj-$(CONFIG_RIO) += rio/ generic_serial.o obj-$(CONFIG_RAW_DRIVER) += raw.o diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig index 9cfbdb318ed..3fd7199301b 100644 --- a/drivers/tty/Kconfig +++ b/drivers/tty/Kconfig @@ -147,4 +147,175 @@ config LEGACY_PTY_COUNT When not in use, each legacy PTY occupies 12 bytes on 32-bit architectures and 24 bytes on 64-bit architectures. +config BFIN_JTAG_COMM + tristate "Blackfin JTAG Communication" + depends on BLACKFIN + help + Add support for emulating a TTY device over the Blackfin JTAG. + + To compile this driver as a module, choose M here: the + module will be called bfin_jtag_comm. + +config BFIN_JTAG_COMM_CONSOLE + bool "Console on Blackfin JTAG" + depends on BFIN_JTAG_COMM=y + +config SERIAL_NONSTANDARD + bool "Non-standard serial port support" + depends on HAS_IOMEM + ---help--- + Say Y here if you have any non-standard serial boards -- boards + which aren't supported using the standard "dumb" serial driver. + This includes intelligent serial boards such as Cyclades, + Digiboards, etc. These are usually used for systems that need many + serial ports because they serve many terminals or dial-in + connections. + + Note that the answer to this question won't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about non-standard serial boards. + + Most people can say N here. + +config ROCKETPORT + tristate "Comtrol RocketPort support" + depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) + help + This driver supports Comtrol RocketPort and RocketModem PCI boards. + These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or + modems. For information about the RocketPort/RocketModem boards + and this driver read <file:Documentation/serial/rocket.txt>. + + To compile this driver as a module, choose M here: the + module will be called rocket. + + If you want to compile this driver into the kernel, say Y here. If + you don't have a Comtrol RocketPort/RocketModem card installed, say N. + +config CYCLADES + tristate "Cyclades async mux support" + depends on SERIAL_NONSTANDARD && (PCI || ISA) + select FW_LOADER + ---help--- + This driver supports Cyclades Z and Y multiserial boards. + You would need something like this to connect more than two modems to + your Linux box, for instance in order to become a dial-in server. + + For information about the Cyclades-Z card, read + <file:Documentation/serial/README.cycladesZ>. + + To compile this driver as a module, choose M here: the + module will be called cyclades. + + If you haven't heard about it, it's safe to say N. + +config CYZ_INTR + bool "Cyclades-Z interrupt mode operation (EXPERIMENTAL)" + depends on EXPERIMENTAL && CYCLADES + help + The Cyclades-Z family of multiport cards allows 2 (two) driver op + modes: polling and interrupt. In polling mode, the driver will check + the status of the Cyclades-Z ports every certain amount of time + (which is called polling cycle and is configurable). In interrupt + mode, it will use an interrupt line (IRQ) in order to check the + status of the Cyclades-Z ports. The default op mode is polling. If + unsure, say N. + +config MOXA_INTELLIO + tristate "Moxa Intellio support" + depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) + select FW_LOADER + help + Say Y here if you have a Moxa Intellio multiport serial card. + + To compile this driver as a module, choose M here: the + module will be called moxa. + +config MOXA_SMARTIO + tristate "Moxa SmartIO support v. 2.0" + depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) + help + Say Y here if you have a Moxa SmartIO multiport serial card and/or + want to help develop a new version of this driver. + + This is upgraded (1.9.1) driver from original Moxa drivers with + changes finally resulting in PCI probing. + + This driver can also be built as a module. The module will be called + mxser. If you want to do that, say M here. + +config SYNCLINK + tristate "Microgate SyncLink card support" + depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API + help + Provides support for the SyncLink ISA and PCI multiprotocol serial + adapters. These adapters support asynchronous and HDLC bit + synchronous communication up to 10Mbps (PCI adapter). + + This driver can only be built as a module ( = code which can be + inserted in and removed from the running kernel whenever you want). + The module will be called synclink. If you want to do that, say M + here. + +config SYNCLINKMP + tristate "SyncLink Multiport support" + depends on SERIAL_NONSTANDARD && PCI + help + Enable support for the SyncLink Multiport (2 or 4 ports) + serial adapter, running asynchronous and HDLC communications up + to 2.048Mbps. Each ports is independently selectable for + RS-232, V.35, RS-449, RS-530, and X.21 + + This driver may be built as a module ( = code which can be + inserted in and removed from the running kernel whenever you want). + The module will be called synclinkmp. If you want to do that, say M + here. + +config SYNCLINK_GT + tristate "SyncLink GT/AC support" + depends on SERIAL_NONSTANDARD && PCI + help + Support for SyncLink GT and SyncLink AC families of + synchronous and asynchronous serial adapters + manufactured by Microgate Systems, Ltd. (www.microgate.com) + +config NOZOMI + tristate "HSDPA Broadband Wireless Data Card - Globe Trotter" + depends on PCI && EXPERIMENTAL + help + If you have a HSDPA driver Broadband Wireless Data Card - + Globe Trotter PCMCIA card, say Y here. + + To compile this driver as a module, choose M here, the module + will be called nozomi. + +config ISI + tristate "Multi-Tech multiport card support (EXPERIMENTAL)" + depends on SERIAL_NONSTANDARD && PCI + select FW_LOADER + help + This is a driver for the Multi-Tech cards which provide several + serial ports. The driver is experimental and can currently only be + built as a module. The module will be called isicom. + If you want to do that, choose M here. + +config N_HDLC + tristate "HDLC line discipline support" + depends on SERIAL_NONSTANDARD + help + Allows synchronous HDLC communications with tty device drivers that + support synchronous HDLC such as the Microgate SyncLink adapter. + + This driver can be built as a module ( = code which can be + inserted in and removed from the running kernel whenever you want). + The module will be called n_hdlc. If you want to do that, say M + here. + +config N_GSM + tristate "GSM MUX line discipline support (EXPERIMENTAL)" + depends on EXPERIMENTAL + depends on NET + help + This line discipline provides support for the GSM MUX protocol and + presents the mux as a set of 61 individual tty devices. diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile index 396277216e4..e549da348a0 100644 --- a/drivers/tty/Makefile +++ b/drivers/tty/Makefile @@ -11,3 +11,16 @@ obj-$(CONFIG_R3964) += n_r3964.o obj-y += vt/ obj-$(CONFIG_HVC_DRIVER) += hvc/ obj-y += serial/ + +# tty drivers +obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o +obj-$(CONFIG_BFIN_JTAG_COMM) += bfin_jtag_comm.o +obj-$(CONFIG_CYCLADES) += cyclades.o +obj-$(CONFIG_ISI) += isicom.o +obj-$(CONFIG_MOXA_INTELLIO) += moxa.o +obj-$(CONFIG_MOXA_SMARTIO) += mxser.o +obj-$(CONFIG_NOZOMI) += nozomi.o +obj-$(CONFIG_ROCKETPORT) += rocket.o +obj-$(CONFIG_SYNCLINK_GT) += synclink_gt.o +obj-$(CONFIG_SYNCLINKMP) += synclinkmp.o +obj-$(CONFIG_SYNCLINK) += synclink.o diff --git a/drivers/char/amiserial.c b/drivers/tty/amiserial.c index f214e502247..f214e502247 100644 --- a/drivers/char/amiserial.c +++ b/drivers/tty/amiserial.c diff --git a/drivers/char/bfin_jtag_comm.c b/drivers/tty/bfin_jtag_comm.c index 16402445f2b..16402445f2b 100644 --- a/drivers/char/bfin_jtag_comm.c +++ b/drivers/tty/bfin_jtag_comm.c diff --git a/drivers/char/cyclades.c b/drivers/tty/cyclades.c index c99728f0cd9..c99728f0cd9 100644 --- a/drivers/char/cyclades.c +++ b/drivers/tty/cyclades.c diff --git a/drivers/char/isicom.c b/drivers/tty/isicom.c index db1cf9c328d..db1cf9c328d 100644 --- a/drivers/char/isicom.c +++ b/drivers/tty/isicom.c diff --git a/drivers/char/moxa.c b/drivers/tty/moxa.c index 35b0c38590e..35b0c38590e 100644 --- a/drivers/char/moxa.c +++ b/drivers/tty/moxa.c diff --git a/drivers/char/moxa.h b/drivers/tty/moxa.h index 87d16ce57be..87d16ce57be 100644 --- a/drivers/char/moxa.h +++ b/drivers/tty/moxa.h diff --git a/drivers/char/mxser.c b/drivers/tty/mxser.c index d188f378684..d188f378684 100644 --- a/drivers/char/mxser.c +++ b/drivers/tty/mxser.c diff --git a/drivers/char/mxser.h b/drivers/tty/mxser.h index 41878a69203..41878a69203 100644 --- a/drivers/char/mxser.h +++ b/drivers/tty/mxser.h diff --git a/drivers/char/nozomi.c b/drivers/tty/nozomi.c index 513ba12064e..513ba12064e 100644 --- a/drivers/char/nozomi.c +++ b/drivers/tty/nozomi.c diff --git a/drivers/char/rocket.c b/drivers/tty/rocket.c index 3780da8ad12..3780da8ad12 100644 --- a/drivers/char/rocket.c +++ b/drivers/tty/rocket.c diff --git a/drivers/char/rocket.h b/drivers/tty/rocket.h index ec863f35f1a..ec863f35f1a 100644 --- a/drivers/char/rocket.h +++ b/drivers/tty/rocket.h diff --git a/drivers/char/rocket_int.h b/drivers/tty/rocket_int.h index 67e0f1e778a..67e0f1e778a 100644 --- a/drivers/char/rocket_int.h +++ b/drivers/tty/rocket_int.h diff --git a/drivers/char/synclink.c b/drivers/tty/synclink.c index 18888d005a0..18888d005a0 100644 --- a/drivers/char/synclink.c +++ b/drivers/tty/synclink.c diff --git a/drivers/char/synclink_gt.c b/drivers/tty/synclink_gt.c index a35dd549a00..a35dd549a00 100644 --- a/drivers/char/synclink_gt.c +++ b/drivers/tty/synclink_gt.c diff --git a/drivers/char/synclinkmp.c b/drivers/tty/synclinkmp.c index 32734369447..32734369447 100644 --- a/drivers/char/synclinkmp.c +++ b/drivers/tty/synclinkmp.c |