diff options
53 files changed, 911 insertions, 467 deletions
diff --git a/Documentation/devicetree/bindings/power/power-controller.txt b/Documentation/devicetree/bindings/power/power-controller.txt new file mode 100644 index 00000000000..4f7a3bc9c40 --- /dev/null +++ b/Documentation/devicetree/bindings/power/power-controller.txt @@ -0,0 +1,18 @@ +* Generic system power control capability + +Power-management integrated circuits or miscellaneous hardware components are +sometimes able to control the system power. The device driver associated with these +components might need to define this capability, which tells the kernel that +it can be used to switch off the system. The corresponding device must have the +standard property "system-power-controller" in its device node. This property +marks the device as able to control the system power. In order to test if this +property is found programmatically, use the helper function +"of_device_is_system_power_controller" from of.h . + +Example: + +act8846: act8846@5 { + compatible = "active-semi,act8846"; + status = "okay"; + system-power-controller; +} diff --git a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt index 865614b34d6..dad6358074a 100644 --- a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt @@ -5,6 +5,10 @@ Required properties: - compatible: "active-semi,act8846" or "active-semi,act8865" - reg: I2C slave address +Optional properties: +- system-power-controller: Telling whether or not this pmic is controlling + the system power. See Documentation/devicetree/bindings/power/power-controller.txt . + Any standard regulator properties can be used to configure the single regulator. The valid names for regulators are: diff --git a/Documentation/devicetree/bindings/regulator/max77802.txt b/Documentation/devicetree/bindings/regulator/max77802.txt index 5aeaffc0f1f..79e5476444f 100644 --- a/Documentation/devicetree/bindings/regulator/max77802.txt +++ b/Documentation/devicetree/bindings/regulator/max77802.txt @@ -25,6 +25,29 @@ with their hardware counterparts as follow. The valid names are: example: LDO1, LDO2, LDO35. -BUCKn : for BUCKs, where n can lie in range 1 to 10. example: BUCK1, BUCK5, BUCK10. + +The max77802 regulator supports two different operating modes: Normal and Low +Power Mode. Some regulators support the modes to be changed at startup or by +the consumers during normal operation while others only support to change the +mode during system suspend. The standard regulator suspend states binding can +be used to configure the regulator operating mode. + +The regulators that support the standard "regulator-initial-mode" property, +changing their mode during normal operation are: LDOs 1, 3, 20 and 21. + +The possible values for "regulator-initial-mode" and "regulator-mode" are: + 1: Normal regulator voltage output mode. + 3: Low Power which reduces the quiescent current down to only 1uA + +The list of valid modes are defined in the dt-bindings/clock/maxim,max77802.h +header and can be included by device tree source files. + +The standard "regulator-mode" property can only be used for regulators that +support changing their mode to Low Power Mode during suspend. These regulators +are: BUCKs 2-4 and LDOs 1-35. Also, it only takes effect if the regulator has +been enabled for the given suspend state using "regulator-on-in-suspend" and +has not been disabled for that state using "regulator-off-in-suspend". + Example: max77802@09 { @@ -36,11 +59,23 @@ Example: #size-cells = <0>; regulators { + ldo1_reg: LDO1 { + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-initial-mode = <MAX77802_OPMODE_LP>; + }; + ldo11_reg: LDO11 { regulator-name = "vdd_ldo11"; regulator-min-microvolt = <1900000>; regulator-max-microvolt = <1900000>; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; }; buck1_reg: BUCK1 { diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index 86074334e34..abb26b58c83 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -19,6 +19,24 @@ Optional properties: design requires. This property describes the total system ramp time required due to the combination of internal ramping of the regulator itself, and board design issues such as trace capacitance and load on the supply. +- regulator-state-mem sub-root node for Suspend-to-RAM mode + : suspend to memory, the device goes to sleep, but all data stored in memory, + only some external interrupt can wake the device. +- regulator-state-disk sub-root node for Suspend-to-DISK mode + : suspend to disk, this state operates similarly to Suspend-to-RAM, + but includes a final step of writing memory contents to disk. +- regulator-state-[mem/disk] node has following common properties: + - regulator-on-in-suspend: regulator should be on in suspend state. + - regulator-off-in-suspend: regulator should be off in suspend state. + - regulator-suspend-microvolt: regulator should be set to this voltage + in suspend. + - regulator-mode: operating mode in the given suspend state. + The set of possible operating modes depends on the capabilities of + every hardware so the valid modes are documented on each regulator + device tree binding document. +- regulator-initial-mode: initial operating mode. The set of possible operating + modes depends on the capabilities of every hardware so each device binding + documentation explains which values the regulator supports. Deprecated properties: - regulator-compatible: If a regulator chip contains multiple @@ -34,6 +52,10 @@ Example: regulator-max-microvolt = <2500000>; regulator-always-on; vin-supply = <&vin>; + + regulator-state-mem { + regulator-on-in-suspend; + }; }; Regulator Consumers: diff --git a/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt b/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt index 882455e9b36..f9acbc1f3c6 100644 --- a/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt @@ -1,6 +1,7 @@ SKY81452 voltage regulator Required properties: +- regulator node named lout. - any required generic properties defined in regulator.txt Optional properties: @@ -9,8 +10,9 @@ Optional properties: Example: regulator { - /* generic regulator properties */ - regulator-name = "touch_en"; - regulator-min-microvolt = <4500000>; - regulator-max-microvolt = <8000000>; + lout { + regulator-name = "sky81452-lout"; + regulator-min-microvolt = <4500000>; + regulator-max-microvolt = <8000000>; + }; }; diff --git a/drivers/regulator/88pm8607.c b/drivers/regulator/88pm8607.c index 6d77dcd7dcf..3fe47bd6615 100644 --- a/drivers/regulator/88pm8607.c +++ b/drivers/regulator/88pm8607.c @@ -330,7 +330,8 @@ static int pm8607_regulator_dt_init(struct platform_device *pdev, for_each_child_of_node(nproot, np) { if (!of_node_cmp(np->name, info->desc.name)) { config->init_data = - of_get_regulator_init_data(&pdev->dev, np); + of_get_regulator_init_data(&pdev->dev, np, + &info->desc); config->of_node = np; break; } diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 5e061347be9..c3a60b57a86 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -521,6 +521,14 @@ config REGULATOR_RN5T618 help Say y here to support the regulators found on Ricoh RN5T618 PMIC. +config REGULATOR_RT5033 + tristate "Richtek RT5033 Regulators" + depends on MFD_RT5033 + help + This adds support for voltage and current regulators in Richtek + RT5033 PMIC. The device supports multiple regulators like + current source, LDO and Buck. + config REGULATOR_S2MPA01 tristate "Samsung S2MPA01 voltage regulator" depends on MFD_SEC_CORE @@ -547,7 +555,7 @@ config REGULATOR_S5M8767 config REGULATOR_SKY81452 tristate "Skyworks Solutions SKY81452 voltage regulator" - depends on SKY81452 + depends on MFD_SKY81452 help This driver supports Skyworks SKY81452 voltage output regulator via I2C bus. SKY81452 has one voltage linear regulator can be diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 1029ed39c51..1f28ebfc6f3 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -69,6 +69,7 @@ obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o obj-$(CONFIG_REGULATOR_RC5T583) += rc5t583-regulator.o obj-$(CONFIG_REGULATOR_RK808) += rk808-regulator.o obj-$(CONFIG_REGULATOR_RN5T618) += rn5t618-regulator.o +obj-$(CONFIG_REGULATOR_RT5033) += rt5033-regulator.o obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c index afd06f92dfd..9eec453b745 100644 --- a/drivers/regulator/act8865-regulator.c +++ b/drivers/regulator/act8865-regulator.c @@ -61,6 +61,8 @@ #define ACT8846_REG12_VSET 0xa0 #define ACT8846_REG12_CTRL 0xa1 #define ACT8846_REG13_CTRL 0xb1 +#define ACT8846_GLB_OFF_CTRL 0xc3 +#define ACT8846_OFF_SYSMASK 0x18 /* * ACT8865 Global Register Map. @@ -84,6 +86,7 @@ #define ACT8865_LDO3_CTRL 0x61 #define ACT8865_LDO4_VSET 0x64 #define ACT8865_LDO4_CTRL 0x65 +#define ACT8865_MSTROFF 0x20 /* * Field Definitions. @@ -98,6 +101,8 @@ struct act8865 { struct regmap *regmap; + int off_reg; + int off_mask; }; static const struct regmap_config act8865_regmap_config = { @@ -275,6 +280,16 @@ static struct regulator_init_data return NULL; } +static struct i2c_client *act8865_i2c_client; +static void act8865_power_off(void) +{ + struct act8865 *act8865; + + act8865 = i2c_get_clientdata(act8865_i2c_client); + regmap_write(act8865->regmap, act8865->off_reg, act8865->off_mask); + while (1); +} + static int act8865_pmic_probe(struct i2c_client *client, const struct i2c_device_id *i2c_id) { @@ -285,6 +300,7 @@ static int act8865_pmic_probe(struct i2c_client *client, int i, ret, num_regulators; struct act8865 *act8865; unsigned long type; + int off_reg, off_mask; pdata = dev_get_platdata(dev); @@ -304,10 +320,14 @@ static int act8865_pmic_probe(struct i2c_client *client, case ACT8846: regulators = act8846_regulators; num_regulators = ARRAY_SIZE(act8846_regulators); + off_reg = ACT8846_GLB_OFF_CTRL; + off_mask = ACT8846_OFF_SYSMASK; break; case ACT8865: regulators = act8865_regulators; num_regulators = ARRAY_SIZE(act8865_regulators); + off_reg = ACT8865_SYS_CTRL; + off_mask = ACT8865_MSTROFF; break; default: dev_err(dev, "invalid device id %lu\n", type); @@ -345,6 +365,17 @@ static int act8865_pmic_probe(struct i2c_client *client, return ret; } + if (of_device_is_system_power_controller(dev->of_node)) { + if (!pm_power_off) { + act8865_i2c_client = client; + act8865->off_reg = off_reg; + act8865->off_mask = off_mask; + pm_power_off = act8865_power_off; + } else { + dev_err(dev, "Failed to set poweroff capability, already defined\n"); + } + } + /* Finally register devices */ for (i = 0; i < num_regulators; i++) { const struct regulator_desc *desc = ®ulators[i]; diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c index 4f730af70e7..3586571814b 100644 --- a/drivers/regulator/anatop-regulator.c +++ b/drivers/regulator/anatop-regulator.c @@ -189,17 +189,18 @@ static int anatop_regulator_probe(struct platform_device *pdev) int ret = 0; u32 val; - initdata = of_get_regulator_init_data(dev, np); sreg = devm_kzalloc(dev, sizeof(*sreg), GFP_KERNEL); if (!sreg) return -ENOMEM; - sreg->initdata = initdata; sreg->name = of_get_property(np, "regulator-name", NULL); rdesc = &sreg->rdesc; rdesc->name = sreg->name; rdesc->type = REGULATOR_VOLTAGE; rdesc->owner = THIS_MODULE; + initdata = of_get_regulator_init_data(dev, np, rdesc); + sreg->initdata = initdata; + anatop_np = of_get_parent(np); if (!anatop_np) return -ENODEV; @@ -283,6 +284,19 @@ static int anatop_regulator_probe(struct platform_device *pdev) sreg->sel = 0; sreg->bypass = true; } + + /* + * In case vddpu was disabled by the bootloader, we need to set + * a sane default until imx6-cpufreq was probed and changes the + * voltage to the correct value. In this case we set 1.25V. + */ + if (!sreg->sel && !strcmp(sreg->name, "vddpu")) + sreg->sel = 22; + + if (!sreg->sel) { + dev_err(&pdev->dev, "Failed to read a valid default voltage selector.\n"); + return -EINVAL; + } } else { rdesc->ops = &anatop_rops; } diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c index 4c9db589f6c..d071b2119a6 100644 --- a/drivers/regulator/arizona-ldo1.c +++ b/drivers/regulator/arizona-ldo1.c @@ -179,7 +179,8 @@ static const struct regulator_init_data arizona_ldo1_default = { }; static int arizona_ldo1_of_get_pdata(struct arizona *arizona, - struct regulator_config *config) + struct regulator_config *config, + const struct regulator_desc *desc) { struct arizona_pdata *pdata = &arizona->pdata; struct arizona_ldo1 *ldo1 = config->driver_data; @@ -194,7 +195,8 @@ static int arizona_ldo1_of_get_pdata(struct arizona *arizona, if (init_node) { config->of_node = init_node; - init_data = of_get_regulator_init_data(arizona->dev, init_node); + init_data = of_get_regulator_init_data(arizona->dev, init_node, + desc); if (init_data) { init_data->consumer_supplies = &ldo1->supply; @@ -257,9 +259,11 @@ static int arizona_ldo1_probe(struct platform_device *pdev) if (IS_ENABLED(CONFIG_OF)) { if (!dev_get_platdata(arizona->dev)) { - ret = arizona_ldo1_of_get_pdata(arizona, &config); + ret = arizona_ldo1_of_get_pdata(arizona, &config, desc); if (ret < 0) return ret; + + config.ena_gpio_initialized = true; } } diff --git a/drivers/regulator/arizona-micsupp.c b/drivers/regulator/arizona-micsupp.c index ce9aca5f8ee..c313ef4c3a2 100644 --- a/drivers/regulator/arizona-micsupp.c +++ b/drivers/regulator/arizona-micsupp.c @@ -198,7 +198,8 @@ static const struct regulator_init_data arizona_micsupp_ext_default = { }; static int arizona_micsupp_of_get_pdata(struct arizona *arizona, - struct regulator_config *config) + struct regulator_config *config, + const struct regulator_desc *desc) { struct arizona_pdata *pdata = &arizona->pdata; struct arizona_micsupp *micsupp = config->driver_data; @@ -210,7 +211,7 @@ static int arizona_micsupp_of_get_pdata(struct arizona *arizona, if (np) { config->of_node = np; - init_data = of_get_regulator_init_data(arizona->dev, np); + init_data = of_get_regulator_init_data(arizona->dev, np, desc); if (init_data) { init_data->consumer_supplies = &micsupp->supply; @@ -264,7 +265,8 @@ static int arizona_micsupp_probe(struct platform_device *pdev) if (IS_ENABLED(CONFIG_OF)) { if (!dev_get_platdata(arizona->dev)) { - ret = arizona_micsupp_of_get_pdata(arizona, &config); + ret = arizona_micsupp_of_get_pdata(arizona, &config, + desc); if (ret < 0) return ret; } diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index cd87c0c3703..e225711bb8b 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -828,7 +828,7 @@ static void print_constraints(struct regulator_dev *rdev) if (!count) sprintf(buf, "no parameters"); - rdev_info(rdev, "%s\n", buf); + rdev_dbg(rdev, "%s\n", buf); if ((constraints->min_uV != constraints->max_uV) && !(constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) @@ -1713,6 +1713,8 @@ static void regulator_ena_gpio_free(struct regulator_dev *rdev) gpiod_put(pin->gpiod); list_del(&pin->list); kfree(pin); + rdev->ena_pin = NULL; + return; } else { pin->request_count--; } @@ -1976,9 +1978,18 @@ static int _regulator_disable(struct regulator_dev *rdev) /* we are last user */ if (_regulator_can_change_status(rdev)) { + ret = _notifier_call_chain(rdev, + REGULATOR_EVENT_PRE_DISABLE, + NULL); + if (ret & NOTIFY_STOP_MASK) + return -EINVAL; + ret = _regulator_do_disable(rdev); if (ret < 0) { rdev_err(rdev, "failed to disable\n"); + _notifier_call_chain(rdev, + REGULATOR_EVENT_ABORT_DISABLE, + NULL); return ret; } _notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE, @@ -2035,9 +2046,16 @@ static int _regulator_force_disable(struct regulator_dev *rdev) { int ret = 0; + ret = _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE | + REGULATOR_EVENT_PRE_DISABLE, NULL); + if (ret & NOTIFY_STOP_MASK) + return -EINVAL; + ret = _regulator_do_disable(rdev); if (ret < 0) { rdev_err(rdev, "failed to force disable\n"); + _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE | + REGULATOR_EVENT_ABORT_DISABLE, NULL); return ret; } @@ -3650,7 +3668,8 @@ regulator_register(const struct regulator_desc *regulator_desc, dev_set_drvdata(&rdev->dev, rdev); - if (config->ena_gpio && gpio_is_valid(config->ena_gpio)) { + if ((config->ena_gpio || config->ena_gpio_initialized) && + gpio_is_valid(config->ena_gpio)) { ret = regulator_ena_gpio_request(rdev, config); if (ret != 0) { rdev_err(rdev, "Failed to request enable GPIO%d: %d\n", diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c index 00033625a09..3945f1006d2 100644 --- a/drivers/regulator/da9052-regulator.c +++ b/drivers/regulator/da9052-regulator.c @@ -436,7 +436,8 @@ static int da9052_regulator_probe(struct platform_device *pdev) if (!of_node_cmp(np->name, regulator->info->reg_desc.name)) { config.init_data = of_get_regulator_init_data( - &pdev->dev, np); + &pdev->dev, np, + ®ulator->info->reg_desc); config.of_node = np; break; } diff --git a/drivers/regulator/da9063-regulator.c b/drivers/regulator/da9063-regulator.c index 7c9461d1331..37dd42759ca 100644 --- a/drivers/regulator/da9063-regulator.c +++ b/drivers/regulator/da9063-regulator.c @@ -867,17 +867,14 @@ static int da9063_regulator_probe(struct platform_device *pdev) return irq; } - regulators->irq_ldo_lim = regmap_irq_get_virq(da9063->regmap_irq, irq); - if (regulators->irq_ldo_lim >= 0) { - ret = request_threaded_irq(regulators->irq_ldo_lim, - NULL, da9063_ldo_lim_event, - IRQF_TRIGGER_LOW | IRQF_ONESHOT, - "LDO_LIM", regulators); - if (ret) { - dev_err(&pdev->dev, - "Failed to request LDO_LIM IRQ.\n"); - regulators->irq_ldo_lim = -ENXIO; - } + ret = request_threaded_irq(irq, + NULL, da9063_ldo_lim_event, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + "LDO_LIM", regulators); + if (ret) { + dev_err(&pdev->dev, + "Failed to request LDO_LIM IRQ.\n"); + regulators->irq_ldo_lim = -ENXIO; } return 0; diff --git a/drivers/regulator/da9210-regulator.c b/drivers/regulator/da9210-regulator.c index 7a320dd11c4..bc6100103f7 100644 --- a/drivers/regulator/da9210-regulator.c +++ b/drivers/regulator/da9210-regulator.c @@ -147,7 +147,7 @@ static int da9210_i2c_probe(struct i2c_client *i2c, config.dev = &i2c->dev; config.init_data = pdata ? &pdata->da9210_constraints : - of_get_regulator_init_data(dev, dev->of_node); + of_get_regulator_init_data(dev, dev->of_node, &da9210_reg); config.driver_data = chip; config.regmap = chip->regmap; config.of_node = dev->of_node; diff --git a/drivers/regulator/dummy.c b/drivers/regulator/dummy.c index 2436db9e2ca..7aef9e4c6fb 100644 --- a/drivers/regulator/dummy.c +++ b/drivers/regulator/dummy.c @@ -33,7 +33,7 @@ static struct regulator_init_data dummy_initdata = { static struct regulator_ops dummy_ops; -static struct regulator_desc dummy_desc = { +static const struct regulator_desc dummy_desc = { .name = "regulator-dummy", .id = -1, .type = REGULATOR_VOLTAGE, diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c index f8e4257aef9..6c43ab2d512 100644 --- a/drivers/regulator/fan53555.c +++ b/drivers/regulator/fan53555.c @@ -302,7 +302,8 @@ static struct regmap_config fan53555_regmap_config = { }; static struct fan53555_platform_data *fan53555_parse_dt(struct device *dev, - struct device_node *np) + struct device_node *np, + const struct regulator_desc *desc) { struct fan53555_platform_data *pdata; int ret; @@ -312,7 +313,7 @@ static struct fan53555_platform_data *fan53555_parse_dt(struct device *dev, if (!pdata) return NULL; - pdata->regulator = of_get_regulator_init_data(dev, np); + pdata->regulator = of_get_regulator_init_data(dev, np, desc); ret = of_property_read_u32(np, "fcs,suspend-voltage-selector", &tmp); @@ -347,20 +348,20 @@ static int fan53555_regulator_probe(struct i2c_client *client, unsigned int val; int ret; + di = devm_kzalloc(&client->dev, sizeof(struct fan53555_device_info), + GFP_KERNEL); + if (!di) + return -ENOMEM; + pdata = dev_get_platdata(&client->dev); if (!pdata) - pdata = fan53555_parse_dt(&client->dev, np); + pdata = fan53555_parse_dt(&client->dev, np, &di->desc); if (!pdata || !pdata->regulator) { dev_err(&client->dev, "Platform data not found!\n"); return -ENODEV; } - di = devm_kzalloc(&client->dev, sizeof(struct fan53555_device_info), - GFP_KERNEL); - if (!di) - return -ENOMEM; - di->regulator = pdata->regulator; if (client->dev.of_node) { const struct of_device_id *match; diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c index 354105eff1f..d21da27c0eb 100644 --- a/drivers/regulator/fixed.c +++ b/drivers/regulator/fixed.c @@ -40,13 +40,15 @@ struct fixed_voltage_data { /** * of_get_fixed_voltage_config - extract fixed_voltage_config structure info * @dev: device requesting for fixed_voltage_config + * @desc: regulator description * * Populates fixed_voltage_config structure by extracting data from device * tree node, returns a pointer to the populated structure of NULL if memory * alloc fails. */ static struct fixed_voltage_config * -of_get_fixed_voltage_config(struct device *dev) +of_get_fixed_voltage_config(struct device *dev, + const struct regulator_desc *desc) { struct fixed_voltage_config *config; struct device_node *np = dev->of_node; @@ -57,7 +59,7 @@ of_get_fixed_voltage_config(struct device *dev) if (!config) return ERR_PTR(-ENOMEM); - config->init_data = of_get_regulator_init_data(dev, dev->of_node); + config->init_data = of_get_regulator_init_data(dev, dev->of_node, desc); if (!config->init_data) return ERR_PTR(-EINVAL); @@ -112,8 +114,14 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev) struct regulator_config cfg = { }; int ret; + drvdata = devm_kzalloc(&pdev->dev, sizeof(struct fixed_voltage_data), + GFP_KERNEL); + if (!drvdata) + return -ENOMEM; + if (pdev->dev.of_node) { - config = of_get_fixed_voltage_config(&pdev->dev); + config = of_get_fixed_voltage_config(&pdev->dev, + &drvdata->desc); if (IS_ERR(config)) return PTR_ERR(config); } else { @@ -123,11 +131,6 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev) if (!config) return -ENOMEM; - drvdata = devm_kzalloc(&pdev->dev, sizeof(struct fixed_voltage_data), - GFP_KERNEL); - if (!drvdata) - return -ENOMEM; - drvdata->desc.name = devm_kstrdup(&pdev->dev, config->supply_name, GFP_KERNEL); @@ -157,8 +160,11 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev) drvdata->desc.fixed_uV = config->microvolts; - if (config->gpio >= 0) + if (gpio_is_valid(config->gpio)) { cfg.ena_gpio = config->gpio; + if (pdev->dev.of_node) + cfg.ena_gpio_initialized = true; + } cfg.ena_gpio_invert = !config->enable_high; if (config->enabled_at_boot) { if (config->enable_high) diff --git a/drivers/regulator/gpio-regulator.c b/drivers/regulator/gpio-regulator.c index 989b23b377c..c888a9a9482 100644 --- a/drivers/regulator/gpio-regulator.c +++ b/drivers/regulator/gpio-regulator.c @@ -133,7 +133,8 @@ static struct regulator_ops gpio_regulator_voltage_ops = { }; static struct gpio_regulator_config * -of_get_gpio_regulator_config(struct device *dev, struct device_node *np) +of_get_gpio_regulator_config(struct device *dev, struct device_node *np, + const struct regulator_desc *desc) { struct gpio_regulator_config *config; const char *regtype; @@ -146,7 +147,7 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np) if (!config) return ERR_PTR(-ENOMEM); - config->init_data = of_get_regulator_init_data(dev, np); + config->init_data = of_get_regulator_init_data(dev, np, desc); if (!config->init_data) return ERR_PTR(-EINVAL); @@ -162,34 +163,41 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np) config->enable_gpio = of_get_named_gpio(np, "enable-gpio", 0); - /* Fetch GPIOs. */ - config->nr_gpios = of_gpio_count(np); - - config->gpios = devm_kzalloc(dev, - sizeof(struct gpio) * config->nr_gpios, - GFP_KERNEL); - if (!config->gpios) - return ERR_PTR(-ENOMEM); - - proplen = of_property_count_u32_elems(np, "gpios-states"); - /* optional property */ - if (proplen < 0) - proplen = 0; - - if (proplen > 0 && proplen != config->nr_gpios) { - dev_warn(dev, "gpios <-> gpios-states mismatch\n"); - proplen = 0; - } + /* Fetch GPIOs. - optional property*/ + ret = of_gpio_count(np); + if ((ret < 0) && (ret != -ENOENT)) + return ERR_PTR(ret); + + if (ret > 0) { + config->nr_gpios = ret; + config->gpios = devm_kzalloc(dev, + sizeof(struct gpio) * config->nr_gpios, + GFP_KERNEL); + if (!config->gpios) + return ERR_PTR(-ENOMEM); + + proplen = of_property_count_u32_elems(np, "gpios-states"); + /* optional property */ + if (proplen < 0) + proplen = 0; + + if (proplen > 0 && proplen != config->nr_gpios) { + dev_warn(dev, "gpios <-> gpios-states mismatch\n"); + proplen = 0; + } - for (i = 0; i < config->nr_gpios; i++) { - gpio = of_get_named_gpio(np, "gpios", i); - if (gpio < 0) - break; - config->gpios[i].gpio = gpio; - if (proplen > 0) { - of_property_read_u32_index(np, "gpios-states", i, &ret); - if (ret) - config->gpios[i].flags = GPIOF_OUT_INIT_HIGH; + for (i = 0; i < config->nr_gpios; i++) { + gpio = of_get_named_gpio(np, "gpios", i); + if (gpio < 0) + break; + config->gpios[i].gpio = gpio; + if (proplen > 0) { + of_property_read_u32_index(np, "gpios-states", + i, &ret); + if (ret) + config->gpios[i].flags = + GPIOF_OUT_INIT_HIGH; + } } } @@ -243,17 +251,18 @@ static int gpio_regulator_probe(struct platform_device *pdev) struct regulator_config cfg = { }; int ptr, ret, state; - if (np) { - config = of_get_gpio_regulator_config(&pdev->dev, np); - if (IS_ERR(config)) - return PTR_ERR(config); - } - drvdata = devm_kzalloc(&pdev->dev, sizeof(struct gpio_regulator_data), GFP_KERNEL); if (drvdata == NULL) return -ENOMEM; + if (np) { + config = of_get_gpio_regulator_config(&pdev->dev, np, + &drvdata->desc); + if (IS_ERR(config)) + return PTR_ERR(config); + } + drvdata->desc.name = kstrdup(config->supply_name, GFP_KERNEL); if (drvdata->desc.name == NULL) { dev_err(&pdev->dev, "Failed to allocate supply name\n"); @@ -261,13 +270,23 @@ static int gpio_regulator_probe(struct platform_device *pdev) goto err; } - drvdata->gpios = kmemdup(config->gpios, - config->nr_gpios * sizeof(struct gpio), - GFP_KERNEL); - if (drvdata->gpios == NULL) { - dev_err(&pdev->dev, "Failed to allocate gpio data\n"); - ret = -ENOMEM; - goto err_name; + if (config->nr_gpios != 0) { + drvdata->gpios = kmemdup(config->gpios, + config->nr_gpios * sizeof(struct gpio), + GFP_KERNEL); + if (drvdata->gpios == NULL) { + dev_err(&pdev->dev, "Failed to allocate gpio data\n"); + ret = -ENOMEM; + goto err_name; + } + + drvdata->nr_gpios = config->nr_gpios; + ret = gpio_request_array(drvdata->gpios, drvdata->nr_gpios); + if (ret) { + dev_err(&pdev->dev, + "Could not obtain regulator setting GPIOs: %d\n", ret); + goto err_memstate; + } } drvdata->states = kmemdup(config->states, @@ -301,14 +320,6 @@ static int gpio_regulator_probe(struct platform_device *pdev) goto err_memgpio; } - drvdata->nr_gpios = config->nr_gpios; - ret = gpio_request_array(drvdata->gpios, drvdata->nr_gpios); - if (ret) { - dev_err(&pdev->dev, - "Could not obtain regulator setting GPIOs: %d\n", ret); - goto err_memstate; - } - /* build initial state from gpio init data. */ state = 0; for (ptr = 0; ptr < drvdata->nr_gpios; ptr++) { @@ -322,8 +333,10 @@ static int gpio_regulator_probe(struct platform_device *pdev) cfg.driver_data = drvdata; cfg.of_node = np; - if (config->enable_gpio >= 0) + if (gpio_is_valid(config->enable_gpio)) { cfg.ena_gpio = config->enable_gpio; + cfg.ena_gpio_initialized = true; + } cfg.ena_gpio_invert = !config->enable_high; if (config->enabled_at_boot) { if (config->enable_high) diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686.c index f69320e1738..871b96bcd2d 100644 --- a/drivers/regulator/max77686.c +++ b/drivers/regulator/max77686.c @@ -45,6 +45,23 @@ #define MAX77686_DVS_MINUV 600000 #define MAX77686_DVS_UVSTEP 12500 +/* + * Values used for configuring LDOs and bucks. + * Forcing low power mode: LDO1, 3-5, 9, 13, 17-26 + */ +#define MAX77686_LDO_LOWPOWER 0x1 +/* + * On/off controlled by PWRREQ: + * - LDO2, 6-8, 10-12, 14-16 + * - buck[1234] + */ +#define MAX77686_OFF_PWRREQ 0x1 +/* Low power mode controlled by PWRREQ: All LDOs */ +#define MAX77686_LDO_LOWPOWER_PWRREQ 0x2 +/* Forcing low power mode: buck[234] */ +#define MAX77686_BUCK_LOWPOWER 0x2 +#define MAX77686_NORMAL 0x3 + #define MAX77686_OPMODE_SHIFT 6 #define MAX77686_OPMODE_BUCK234_SHIFT 4 #define MAX77686_OPMODE_MASK 0x3 @@ -65,23 +82,36 @@ enum max77686_ramp_rate { }; struct max77686_data { + /* Array indexed by regulator id */ unsigned int opmode[MAX77686_REGULATORS]; }; -/* Some BUCKS supports Normal[ON/OFF] mode during suspend */ -static int max77686_buck_set_suspend_disable(struct regulator_dev *rdev) +static unsigned int max77686_get_opmode_shift(int id) { - unsigned int val; + switch (id) { + case MAX77686_BUCK1: + case MAX77686_BUCK5 ... MAX77686_BUCK9: + return 0; + case MAX77686_BUCK2 ... MAX77686_BUCK4: + return MAX77686_OPMODE_BUCK234_SHIFT; + default: + /* all LDOs */ + return MAX77686_OPMODE_SHIFT; + } +} + +/* Some BUCKs and LDOs supports Normal[ON/OFF] mode during suspend */ +static int max77686_set_suspend_disable(struct regulator_dev *rdev) +{ + unsigned int val, shift; struct max77686_data *max77686 = rdev_get_drvdata(rdev); int ret, id = rdev_get_id(rdev); - if (id == MAX77686_BUCK1) - val = 0x1; - else - val = 0x1 << MAX77686_OPMODE_BUCK234_SHIFT; + shift = max77686_get_opmode_shift(id); + val = MAX77686_OFF_PWRREQ; ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, - rdev->desc->enable_mask, val); + rdev->desc->enable_mask, val << shift); if (ret) return ret; @@ -103,10 +133,10 @@ static int max77686_set_suspend_mode(struct regulator_dev *rdev, switch (mode) { case REGULATOR_MODE_IDLE: /* ON in LP Mode */ - val = 0x2 << MAX77686_OPMODE_SHIFT; + val = MAX77686_LDO_LOWPOWER_PWRREQ; break; case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */ - val = 0x3 << MAX77686_OPMODE_SHIFT; + val = MAX77686_NORMAL; break; default: pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n", @@ -115,7 +145,8 @@ static int max77686_set_suspend_mode(struct regulator_dev *rdev, } ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, - rdev->desc->enable_mask, val); + rdev->desc->enable_mask, + val << MAX77686_OPMODE_SHIFT); if (ret) return ret; @@ -133,13 +164,13 @@ static int max77686_ldo_set_suspend_mode(struct regulator_dev *rdev, switch (mode) { case REGULATOR_MODE_STANDBY: /* switch off */ - val = 0x1 << MAX77686_OPMODE_SHIFT; + val = MAX77686_OFF_PWRREQ; break; case REGULATOR_MODE_IDLE: /* ON in LP Mode */ - val = 0x2 << MAX77686_OPMODE_SHIFT; + val = MAX77686_LDO_LOWPOWER_PWRREQ; break; case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */ - val = 0x3 << MAX77686_OPMODE_SHIFT; + val = MAX77686_NORMAL; break; default: pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n", @@ -148,7 +179,8 @@ static int max77686_ldo_set_suspend_mode(struct regulator_dev *rdev, } ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, - rdev->desc->enable_mask, val); + rdev->desc->enable_mask, + val << MAX77686_OPMODE_SHIFT); if (ret) return ret; @@ -159,10 +191,17 @@ static int max77686_ldo_set_suspend_mode(struct regulator_dev *rdev, static int max77686_enable(struct regulator_dev *rdev) { struct max77686_data *max77686 = rdev_get_drvdata(rdev); + unsigned int shift; + int id = rdev_get_id(rdev); + + shift = max77686_get_opmode_shift(id); + + if (max77686->opmode[id] == MAX77686_OFF_PWRREQ) + max77686->opmode[id] = MAX77686_NORMAL; return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, rdev->desc->enable_mask, - max77686->opmode[rdev_get_id(rdev)]); + max77686->opmode[id] << shift); } static int max77686_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) @@ -212,6 +251,7 @@ static struct regulator_ops max77686_ldo_ops = { .set_voltage_sel = regulator_set_voltage_sel_regmap, .set_voltage_time_sel = regulator_set_voltage_time_sel, .set_suspend_mode = max77686_ldo_set_suspend_mode, + .set_suspend_disable = max77686_set_suspend_disable, }; static struct regulator_ops max77686_buck1_ops = { @@ -223,7 +263,7 @@ static struct regulator_ops max77686_buck1_ops = { .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = regulator_set_voltage_sel_regmap, .set_voltage_time_sel = regulator_set_voltage_time_sel, - .set_suspend_disable = max77686_buck_set_suspend_disable, + .set_suspend_disable = max77686_set_suspend_disable, }; static struct regulator_ops max77686_buck_dvs_ops = { @@ -236,11 +276,13 @@ static struct regulator_ops max77686_buck_dvs_ops = { .set_voltage_sel = regulator_set_voltage_sel_regmap, .set_voltage_time_sel = regulator_set_voltage_time_sel, .set_ramp_delay = max77686_set_ramp_delay, - .set_suspend_disable = max77686_buck_set_suspend_disable, + .set_suspend_disable = max77686_set_suspend_disable, }; #define regulator_desc_ldo(num) { \ .name = "LDO"#num, \ + .of_match = of_match_ptr("LDO"#num), \ + .regulators_node = of_match_ptr("voltage-regulators"), \ .id = MAX77686_LDO##num, \ .ops = &max77686_ops, \ .type = REGULATOR_VOLTAGE, \ @@ -257,6 +299,8 @@ static struct regulator_ops max77686_buck_dvs_ops = { } #define regulator_desc_lpm_ldo(num) { \ .name = "LDO"#num, \ + .of_match = of_match_ptr("LDO"#num), \ + .regulators_node = of_match_ptr("voltage-regulators"), \ .id = MAX77686_LDO##num, \ .ops = &max77686_ldo_ops, \ .type = REGULATOR_VOLTAGE, \ @@ -273,6 +317,8 @@ static struct regulator_ops max77686_buck_dvs_ops = { } #define regulator_desc_ldo_low(num) { \ .name = "LDO"#num, \ + .of_match = of_match_ptr("LDO"#num), \ + .regulators_node = of_match_ptr("voltage-regulators"), \ .id = MAX77686_LDO##num, \ .ops = &max77686_ldo_ops, \ .type = REGULATOR_VOLTAGE, \ @@ -289,6 +335,8 @@ static struct regulator_ops max77686_buck_dvs_ops = { } #define regulator_desc_ldo1_low(num) { \ .name = "LDO"#num, \ + .of_match = of_match_ptr("LDO"#num), \ + .regulators_node = of_match_ptr("voltage-regulators"), \ .id = MAX77686_LDO##num, \ .ops = &max77686_ops, \ .type = REGULATOR_VOLTAGE, \ @@ -305,6 +353,8 @@ static struct regulator_ops max77686_buck_dvs_ops = { } #define regulator_desc_buck(num) { \ .name = "BUCK"#num, \ + .of_match = of_match_ptr("BUCK"#num), \ + .regulators_node = of_match_ptr("voltage-regulators"), \ .id = MAX77686_BUCK##num, \ .ops = &max77686_ops, \ .type = REGULATOR_VOLTAGE, \ @@ -320,6 +370,8 @@ static struct regulator_ops max77686_buck_dvs_ops = { } #define regulator_desc_buck1(num) { \ .name = "BUCK"#num, \ + .of_match = of_match_ptr("BUCK"#num), \ + .regulators_node = of_match_ptr("voltage-regulators"), \ .id = MAX77686_BUCK##num, \ .ops = &max77686_buck1_ops, \ .type = REGULATOR_VOLTAGE, \ @@ -335,6 +387,8 @@ static struct regulator_ops max77686_buck_dvs_ops = { } #define regulator_desc_buck_dvs(num) { \ .name = "BUCK"#num, \ + .of_match = of_match_ptr("BUCK"#num), \ + .regulators_node = of_match_ptr("voltage-regulators"), \ .id = MAX77686_BUCK##num, \ .ops = &max77686_buck_dvs_ops, \ .type = REGULATOR_VOLTAGE, \ @@ -350,7 +404,7 @@ static struct regulator_ops max77686_buck_dvs_ops = { << MAX77686_OPMODE_BUCK234_SHIFT, \ } -static struct regulator_desc regulators[] = { +static const struct regulator_desc regulators[] = { regulator_desc_ldo1_low(1), regulator_desc_ldo_low(2), regulator_desc_ldo(3), @@ -388,103 +442,37 @@ static struct regulator_desc regulators[] = { regulator_desc_buck(9), }; -#ifdef CONFIG_OF -static int max77686_pmic_dt_parse_pdata(struct platform_device *pdev, - struct max77686_platform_data *pdata) -{ - struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent); - struct device_node *pmic_np, *regulators_np; - struct max77686_regulator_data *rdata; - struct of_regulator_match rmatch = { }; - unsigned int i; - - pmic_np = iodev->dev->of_node; - regulators_np = of_get_child_by_name(pmic_np, "voltage-regulators"); - if (!regulators_np) { - dev_err(&pdev->dev, "could not find regulators sub-node\n"); - return -EINVAL; - } - - pdata->num_regulators = ARRAY_SIZE(regulators); - rdata = devm_kzalloc(&pdev->dev, sizeof(*rdata) * - pdata->num_regulators, GFP_KERNEL); - if (!rdata) { - of_node_put(regulators_np); - return -ENOMEM; - } - - for (i = 0; i < pdata->num_regulators; i++) { - rmatch.name = regulators[i].name; - rmatch.init_data = NULL; - rmatch.of_node = NULL; - of_regulator_match(&pdev->dev, regulators_np, &rmatch, 1); - rdata[i].initdata = rmatch.init_data; - rdata[i].of_node = rmatch.of_node; - } - - pdata->regulators = rdata; - of_node_put(regulators_np); - - return 0; -} -#else -static int max77686_pmic_dt_parse_pdata(struct platform_device *pdev, - struct max77686_platform_data *pdata) -{ - return 0; -} -#endif /* CONFIG_OF */ - static int max77686_pmic_probe(struct platform_device *pdev) { struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent); - struct max77686_platform_data *pdata = dev_get_platdata(iodev->dev); struct max77686_data *max77686; - int i, ret = 0; + int i; struct regulator_config config = { }; dev_dbg(&pdev->dev, "%s\n", __func__); - if (!pdata) { - dev_err(&pdev->dev, "no platform data found for regulator\n"); - return -ENODEV; - } - - if (iodev->dev->of_node) { - ret = max77686_pmic_dt_parse_pdata(pdev, pdata); - if (ret) - return ret; - } - - if (pdata->num_regulators != MAX77686_REGULATORS) { - dev_err(&pdev->dev, - "Invalid initial data for regulator's initialiation\n"); - return -EINVAL; - } - max77686 = devm_kzalloc(&pdev->dev, sizeof(struct max77686_data), GFP_KERNEL); if (!max77686) return -ENOMEM; - config.dev = &pdev->dev; + config.dev = iodev->dev; config.regmap = iodev->regmap; config.driver_data = max77686; platform_set_drvdata(pdev, max77686); for (i = 0; i < MAX77686_REGULATORS; i++) { struct regulator_dev *rdev; + int id = regulators[i].id; - config.init_data = pdata->regulators[i].initdata; - config.of_node = pdata->regulators[i].of_node; - - max77686->opmode[i] = regulators[i].enable_mask; + max77686->opmode[id] = MAX77686_NORMAL; rdev = devm_regulator_register(&pdev->dev, ®ulators[i], &config); if (IS_ERR(rdev)) { + int ret = PTR_ERR(rdev); dev_err(&pdev->dev, - "regulator init failed for %d\n", i); - return PTR_ERR(rdev); + "regulator init failed for %d: %d\n", i, ret); + return ret; } } diff --git a/drivers/regulator/max77693.c b/drivers/regulator/max77693.c index d158f71fa12..7b9755a6c3b 100644 --- a/drivers/regulator/max77693.c +++ b/drivers/regulator/max77693.c @@ -139,7 +139,7 @@ static struct regulator_ops max77693_charger_ops = { .enable_mask = SAFEOUT_CTRL_ENSAFEOUT##_num##_MASK , \ } -static struct regulator_desc regulators[] = { +static const struct regulator_desc regulators[] = { regulator_desc_esafeout(1), regulator_desc_esafeout(2), { diff --git a/drivers/regulator/max77802.c b/drivers/regulator/max77802.c index 45fa240fe24..0766615c60b 100644 --- a/drivers/regulator/max77802.c +++ b/drivers/regulator/max77802.c @@ -33,6 +33,7 @@ #include <linux/regulator/of_regulator.h> #include <linux/mfd/max77686.h> #include <linux/mfd/max77686-private.h> +#include <dt-bindings/regulator/maxim,max77802.h> /* Default ramp delay in case it is not manually set */ #define MAX77802_RAMP_DELAY 100000 /* uV/us */ @@ -49,6 +50,10 @@ #define MAX77802_RAMP_RATE_MASK_4BIT 0xF0 #define MAX77802_RAMP_RATE_SHIFT_4BIT 4 +#define MAX77802_STATUS_OFF 0x0 +#define MAX77802_OFF_PWRREQ 0x1 +#define MAX77802_LP_PWRREQ 0x2 + /* MAX77802 has two register formats: 2-bit and 4-bit */ static const unsigned int ramp_table_77802_2bit[] = { 12500, @@ -65,9 +70,16 @@ static unsigned int ramp_table_77802_4bit[] = { }; struct max77802_regulator_prv { + /* Array indexed by regulator id */ unsigned int opmode[MAX77802_REG_MAX]; }; +static inline unsigned int max77802_map_mode(unsigned int mode) +{ + return mode == MAX77802_OPMODE_NORMAL ? + REGULATOR_MODE_NORMAL : REGULATOR_MODE_STANDBY; +} + static int max77802_get_opmode_shift(int id) { if (id == MAX77802_BUCK1 || (id >= MAX77802_BUCK5 && @@ -83,17 +95,16 @@ static int max77802_get_opmode_shift(int id) return -EINVAL; } -/* - * Some BUCKS supports Normal[ON/OFF] mode during suspend +/** + * max77802_set_suspend_disable - Disable the regulator during system suspend + * @rdev: regulator to mark as disabled * - * BUCK 1, 6, 2-4, 5, 7-10 (all) - * - * The other mode (0x02) will make PWRREQ switch between normal - * and low power. + * All regulators expect LDO 1, 3, 20 and 21 support OFF by PWRREQ. + * Configure the regulator so the PMIC will turn it OFF during system suspend. */ -static int max77802_buck_set_suspend_disable(struct regulator_dev *rdev) +static int max77802_set_suspend_disable(struct regulator_dev *rdev) { - unsigned int val = MAX77802_OPMODE_STANDBY; + unsigned int val = MAX77802_OFF_PWRREQ; struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev); int id = rdev_get_id(rdev); int shift = max77802_get_opmode_shift(id); @@ -104,14 +115,11 @@ static int max77802_buck_set_suspend_disable(struct regulator_dev *rdev) } /* - * Some LDOs supports LPM-ON/OFF/Normal-ON mode during suspend state - * (Enable Control Logic1 by PWRREQ) - * - * LDOs 2, 4-19, 22-35. + * Some LDOs support Low Power Mode while the system is running. * + * LDOs 1, 3, 20, 21. */ -static int max77802_ldo_set_suspend_mode_logic1(struct regulator_dev *rdev, - unsigned int mode) +static int max77802_set_mode(struct regulator_dev *rdev, unsigned int mode) { struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev); int id = rdev_get_id(rdev); @@ -119,14 +127,11 @@ static int max77802_ldo_set_suspend_mode_logic1(struct regulator_dev *rdev, int shift = max77802_get_opmode_shift(id); switch (mode) { - case REGULATOR_MODE_IDLE: /* ON in LP Mode */ - val = MAX77802_OPMODE_LP; + case REGULATOR_MODE_STANDBY: + val = MAX77802_OPMODE_LP; /* ON in Low Power Mode */ break; - case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */ - val = MAX77802_OPMODE_NORMAL; - break; - case REGULATOR_MODE_STANDBY: /* ON/OFF by PWRREQ */ - val = MAX77802_OPMODE_STANDBY; + case REGULATOR_MODE_NORMAL: + val = MAX77802_OPMODE_NORMAL; /* ON in Normal Mode */ break; default: dev_warn(&rdev->dev, "%s: regulator mode: 0x%x not supported\n", @@ -139,35 +144,76 @@ static int max77802_ldo_set_suspend_mode_logic1(struct regulator_dev *rdev, rdev->desc->enable_mask, val << shift); } -/* - * Mode 1 (Output[ON/OFF] by PWRREQ) is not supported on some LDOs - * (Enable Control Logic2 by PWRREQ) +static unsigned max77802_get_mode(struct regulator_dev *rdev) +{ + struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev); + int id = rdev_get_id(rdev); + + return max77802_map_mode(max77802->opmode[id]); +} + +/** + * max77802_set_suspend_mode - set regulator opmode when the system is suspended + * @rdev: regulator to change mode + * @mode: operating mode to be set * - * LDOs 1, 20, 21, and 3, + * Will set the operating mode for the regulators during system suspend. + * This function is valid for the three different enable control logics: * + * Enable Control Logic1 by PWRREQ (BUCK 2-4 and LDOs 2, 4-19, 22-35) + * Enable Control Logic2 by PWRREQ (LDOs 1, 20, 21) + * Enable Control Logic3 by PWRREQ (LDO 3) + * + * If setting the regulator mode fails, the function only warns but does + * not return an error code to avoid the regulator core to stop setting + * the operating mode for the remaining regulators. */ -static int max77802_ldo_set_suspend_mode_logic2(struct regulator_dev *rdev, - unsigned int mode) +static int max77802_set_suspend_mode(struct regulator_dev *rdev, + unsigned int mode) { struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev); int id = rdev_get_id(rdev); unsigned int val; int shift = max77802_get_opmode_shift(id); + /* + * If the regulator has been disabled for suspend + * then is invalid to try setting a suspend mode. + */ + if (max77802->opmode[id] == MAX77802_OFF_PWRREQ) { + dev_warn(&rdev->dev, "%s: is disabled, mode: 0x%x not set\n", + rdev->desc->name, mode); + return 0; + } + switch (mode) { - case REGULATOR_MODE_IDLE: /* ON in LP Mode */ - val = MAX77802_OPMODE_LP; - break; - case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */ - val = MAX77802_OPMODE_NORMAL; + case REGULATOR_MODE_STANDBY: + /* + * If the regulator opmode is normal then enable + * ON in Low Power Mode by PWRREQ. If the mode is + * already Low Power then no action is required. + */ + if (max77802->opmode[id] == MAX77802_OPMODE_NORMAL) + val = MAX77802_LP_PWRREQ; + else + return 0; break; + case REGULATOR_MODE_NORMAL: + /* + * If the regulator operating mode is Low Power then + * normal is not a valid opmode in suspend. If the + * mode is already normal then no action is required. + */ + if (max77802->opmode[id] == MAX77802_OPMODE_LP) + dev_warn(&rdev->dev, "%s: in Low Power: 0x%x invalid\n", + rdev->desc->name, mode); + return 0; default: dev_warn(&rdev->dev, "%s: regulator mode: 0x%x not supported\n", rdev->desc->name, mode); return -EINVAL; } - max77802->opmode[id] = val; return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, rdev->desc->enable_mask, val << shift); } @@ -178,6 +224,9 @@ static int max77802_enable(struct regulator_dev *rdev) int id = rdev_get_id(rdev); int shift = max77802_get_opmode_shift(id); + if (max77802->opmode[id] == MAX77802_OFF_PWRREQ) + max77802->opmode[id] = MAX77802_OPMODE_NORMAL; + return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, rdev->desc->enable_mask, max77802->opmode[id] << shift); @@ -247,7 +296,8 @@ static struct regulator_ops max77802_ldo_ops_logic1 = { .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = regulator_set_voltage_sel_regmap, .set_voltage_time_sel = regulator_set_voltage_time_sel, - .set_suspend_mode = max77802_ldo_set_suspend_mode_logic1, + .set_suspend_disable = max77802_set_suspend_disable, + .set_suspend_mode = max77802_set_suspend_mode, }; /* @@ -262,7 +312,9 @@ static struct regulator_ops max77802_ldo_ops_logic2 = { .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = regulator_set_voltage_sel_regmap, .set_voltage_time_sel = regulator_set_voltage_time_sel, - .set_suspend_mode = max77802_ldo_set_suspend_mode_logic2, + .set_mode = max77802_set_mode, + .get_mode = max77802_get_mode, + .set_suspend_mode = max77802_set_suspend_mode, }; /* BUCKS 1, 6 */ @@ -276,10 +328,25 @@ static struct regulator_ops max77802_buck_16_dvs_ops = { .set_voltage_sel = regulator_set_voltage_sel_regmap, .set_voltage_time_sel = regulator_set_voltage_time_sel, .set_ramp_delay = max77802_set_ramp_delay_4bit, - .set_suspend_disable = max77802_buck_set_suspend_disable, + .set_suspend_disable = max77802_set_suspend_disable, }; -/* BUCKs 2-4, 5, 7-10 */ +/* BUCKs 2-4 */ +static struct regulator_ops max77802_buck_234_ops = { + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .is_enabled = regulator_is_enabled_regmap, + .enable = max77802_enable, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_ramp_delay = max77802_set_ramp_delay_2bit, + .set_suspend_disable = max77802_set_suspend_disable, + .set_suspend_mode = max77802_set_suspend_mode, +}; + +/* BUCKs 5, 7-10 */ static struct regulator_ops max77802_buck_dvs_ops = { .list_voltage = regulator_list_voltage_linear, .map_voltage = regulator_map_voltage_linear, @@ -290,12 +357,14 @@ static struct regulator_ops max77802_buck_dvs_ops = { .set_voltage_sel = regulator_set_voltage_sel_regmap, .set_voltage_time_sel = regulator_set_voltage_time_sel, .set_ramp_delay = max77802_set_ramp_delay_2bit, - .set_suspend_disable = max77802_buck_set_suspend_disable, + .set_suspend_disable = max77802_set_suspend_disable, }; /* LDOs 3-7, 9-14, 18-26, 28, 29, 32-34 */ #define regulator_77802_desc_p_ldo(num, supply, log) { \ .name = "LDO"#num, \ + .of_match = of_match_ptr("LDO"#num), \ + .regulators_node = of_match_ptr("regulators"), \ .id = MAX77802_LDO##num, \ .supply_name = "inl"#supply, \ .ops = &max77802_ldo_ops_logic##log, \ @@ -309,11 +378,14 @@ static struct regulator_ops max77802_buck_dvs_ops = { .vsel_mask = MAX77802_VSEL_MASK, \ .enable_reg = MAX77802_REG_LDO1CTRL1 + num - 1, \ .enable_mask = MAX77802_OPMODE_MASK << MAX77802_OPMODE_SHIFT_LDO, \ + .of_map_mode = max77802_map_mode, \ } /* LDOs 1, 2, 8, 15, 17, 27, 30, 35 */ #define regulator_77802_desc_n_ldo(num, supply, log) { \ .name = "LDO"#num, \ + .of_match = of_match_ptr("LDO"#num), \ + .regulators_node = of_match_ptr("regulators"), \ .id = MAX77802_LDO##num, \ .supply_name = "inl"#supply, \ .ops = &max77802_ldo_ops_logic##log, \ @@ -327,11 +399,14 @@ static struct regulator_ops max77802_buck_dvs_ops = { .vsel_mask = MAX77802_VSEL_MASK, \ .enable_reg = MAX77802_REG_LDO1CTRL1 + num - 1, \ .enable_mask = MAX77802_OPMODE_MASK << MAX77802_OPMODE_SHIFT_LDO, \ + .of_map_mode = max77802_map_mode, \ } /* BUCKs 1, 6 */ #define regulator_77802_desc_16_buck(num) { \ .name = "BUCK"#num, \ + .of_match = of_match_ptr("BUCK"#num), \ + .regulators_node = of_match_ptr("regulators"), \ .id = MAX77802_BUCK##num, \ .supply_name = "inb"#num, \ .ops = &max77802_buck_16_dvs_ops, \ @@ -345,14 +420,17 @@ static struct regulator_ops max77802_buck_dvs_ops = { .vsel_mask = MAX77802_DVS_VSEL_MASK, \ .enable_reg = MAX77802_REG_BUCK ## num ## CTRL, \ .enable_mask = MAX77802_OPMODE_MASK, \ + .of_map_mode = max77802_map_mode, \ } /* BUCKS 2-4 */ #define regulator_77802_desc_234_buck(num) { \ .name = "BUCK"#num, \ + .of_match = of_match_ptr("BUCK"#num), \ + .regulators_node = of_match_ptr("regulators"), \ .id = MAX77802_BUCK##num, \ .supply_name = "inb"#num, \ - .ops = &max77802_buck_dvs_ops, \ + .ops = &max77802_buck_234_ops, \ .type = REGULATOR_VOLTAGE, \ .owner = THIS_MODULE, \ .min_uV = 600000, \ @@ -364,11 +442,14 @@ static struct regulator_ops max77802_buck_dvs_ops = { .enable_reg = MAX77802_REG_BUCK ## num ## CTRL1, \ .enable_mask = MAX77802_OPMODE_MASK << \ MAX77802_OPMODE_BUCK234_SHIFT, \ + .of_map_mode = max77802_map_mode, \ } /* BUCK 5 */ #define regulator_77802_desc_buck5(num) { \ .name = "BUCK"#num, \ + .of_match = of_match_ptr("BUCK"#num), \ + .regulators_node = of_match_ptr("regulators"), \ .id = MAX77802_BUCK##num, \ .supply_name = "inb"#num, \ .ops = &max77802_buck_dvs_ops, \ @@ -382,11 +463,14 @@ static struct regulator_ops max77802_buck_dvs_ops = { .vsel_mask = MAX77802_VSEL_MASK, \ .enable_reg = MAX77802_REG_BUCK5CTRL, \ .enable_mask = MAX77802_OPMODE_MASK, \ + .of_map_mode = max77802_map_mode, \ } /* BUCKs 7-10 */ #define regulator_77802_desc_buck7_10(num) { \ .name = "BUCK"#num, \ + .of_match = of_match_ptr("BUCK"#num), \ + .regulators_node = of_match_ptr("regulators"), \ .id = MAX77802_BUCK##num, \ .supply_name = "inb"#num, \ .ops = &max77802_buck_dvs_ops, \ @@ -400,9 +484,10 @@ static struct regulator_ops max77802_buck_dvs_ops = { .vsel_mask = MAX77802_VSEL_MASK, \ .enable_reg = MAX77802_REG_BUCK7CTRL + (num - 7) * 3, \ .enable_mask = MAX77802_OPMODE_MASK, \ + .of_map_mode = max77802_map_mode, \ } -static struct regulator_desc regulators[] = { +static const struct regulator_desc regulators[] = { regulator_77802_desc_16_buck(1), regulator_77802_desc_234_buck(2), regulator_77802_desc_234_buck(3), @@ -447,85 +532,19 @@ static struct regulator_desc regulators[] = { regulator_77802_desc_n_ldo(35, 2, 1), }; -#ifdef CONFIG_OF -static int max77802_pmic_dt_parse_pdata(struct platform_device *pdev, - struct max77686_platform_data *pdata) -{ - struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent); - struct device_node *pmic_np, *regulators_np; - struct max77686_regulator_data *rdata; - struct of_regulator_match rmatch = { }; - unsigned int i; - - pmic_np = iodev->dev->of_node; - regulators_np = of_get_child_by_name(pmic_np, "regulators"); - if (!regulators_np) { - dev_err(&pdev->dev, "could not find regulators sub-node\n"); - return -EINVAL; - } - - pdata->num_regulators = ARRAY_SIZE(regulators); - rdata = devm_kzalloc(&pdev->dev, sizeof(*rdata) * - pdata->num_regulators, GFP_KERNEL); - if (!rdata) { - of_node_put(regulators_np); - return -ENOMEM; - } - - for (i = 0; i < pdata->num_regulators; i++) { - rmatch.name = regulators[i].name; - rmatch.init_data = NULL; - rmatch.of_node = NULL; - if (of_regulator_match(&pdev->dev, regulators_np, &rmatch, - 1) != 1) { - dev_warn(&pdev->dev, "No matching regulator for '%s'\n", - rmatch.name); - continue; - } - rdata[i].initdata = rmatch.init_data; - rdata[i].of_node = rmatch.of_node; - rdata[i].id = regulators[i].id; - } - - pdata->regulators = rdata; - of_node_put(regulators_np); - - return 0; -} -#else -static int max77802_pmic_dt_parse_pdata(struct platform_device *pdev, - struct max77686_platform_data *pdata) -{ - return 0; -} -#endif /* CONFIG_OF */ - static int max77802_pmic_probe(struct platform_device *pdev) { struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent); - struct max77686_platform_data *pdata = dev_get_platdata(iodev->dev); struct max77802_regulator_prv *max77802; - int i, ret = 0, val; + int i, val; struct regulator_config config = { }; - /* This is allocated by the MFD driver */ - if (!pdata) { - dev_err(&pdev->dev, "no platform data found for regulator\n"); - return -ENODEV; - } - max77802 = devm_kzalloc(&pdev->dev, sizeof(struct max77802_regulator_prv), GFP_KERNEL); if (!max77802) return -ENOMEM; - if (iodev->dev->of_node) { - ret = max77802_pmic_dt_parse_pdata(pdev, pdata); - if (ret) - return ret; - } - config.dev = iodev->dev; config.regmap = iodev->regmap; config.driver_data = max77802; @@ -533,21 +552,25 @@ static int max77802_pmic_probe(struct platform_device *pdev) for (i = 0; i < MAX77802_REG_MAX; i++) { struct regulator_dev *rdev; - int id = pdata->regulators[i].id; + int id = regulators[i].id; int shift = max77802_get_opmode_shift(id); - - config.init_data = pdata->regulators[i].initdata; - config.of_node = pdata->regulators[i].of_node; + int ret; ret = regmap_read(iodev->regmap, regulators[i].enable_reg, &val); - val = val >> shift & MAX77802_OPMODE_MASK; + if (ret < 0) { + dev_warn(&pdev->dev, + "cannot read current mode for %d\n", i); + val = MAX77802_OPMODE_NORMAL; + } else { + val = val >> shift & MAX77802_OPMODE_MASK; + } /* * If the regulator is disabled and the system warm rebooted, * the hardware reports OFF as the regulator operating mode. * Default to operating mode NORMAL in that case. */ - if (val == MAX77802_OPMODE_OFF) + if (val == MAX77802_STATUS_OFF) max77802->opmode[id] = MAX77802_OPMODE_NORMAL; else max77802->opmode[id] = val; @@ -555,9 +578,10 @@ static int max77802_pmic_probe(struct platform_device *pdev) rdev = devm_regulator_register(&pdev->dev, ®ulators[i], &config); if (IS_ERR(rdev)) { + ret = PTR_ERR(rdev); dev_err(&pdev->dev, - "regulator init failed for %d\n", i); - return PTR_ERR(rdev); + "regulator init failed for %d: %d\n", i, ret); + return ret; } } diff --git a/drivers/regulator/max8952.c b/drivers/regulator/max8952.c index f7f9efcfedb..1af8f4a2ab8 100644 --- a/drivers/regulator/max8952.c +++ b/drivers/regulator/max8952.c @@ -174,7 +174,7 @@ static struct max8952_platform_data *max8952_parse_dt(struct device *dev) if (of_property_read_u32(np, "max8952,ramp-speed", &pd->ramp_speed)) dev_warn(dev, "max8952,ramp-speed property not specified, defaulting to 32mV/us\n"); - pd->reg_data = of_get_regulator_init_data(dev, np); + pd->reg_data = of_get_regulator_init_data(dev, np, ®ulator); if (!pd->reg_data) { dev_err(dev, "Failed to parse regulator init data\n"); return NULL; @@ -225,6 +225,8 @@ static int max8952_pmic_probe(struct i2c_client *client, config.of_node = client->dev.of_node; config.ena_gpio = pdata->gpio_en; + if (client->dev.of_node) + config.ena_gpio_initialized = true; if (pdata->reg_data->constraints.boot_on) config.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH; diff --git a/drivers/regulator/max8973-regulator.c b/drivers/regulator/max8973-regulator.c index dbedf1768db..c3d55c2db59 100644 --- a/drivers/regulator/max8973-regulator.c +++ b/drivers/regulator/max8973-regulator.c @@ -458,7 +458,8 @@ static int max8973_probe(struct i2c_client *client, config.dev = &client->dev; config.init_data = pdata ? pdata->reg_init_data : - of_get_regulator_init_data(&client->dev, client->dev.of_node); + of_get_regulator_init_data(&client->dev, client->dev.of_node, + &max->desc); config.driver_data = max; config.of_node = client->dev.of_node; config.regmap = max->regmap; diff --git a/drivers/regulator/max8997.c b/drivers/regulator/max8997.c index 9c31e215a52..726fde1d883 100644 --- a/drivers/regulator/max8997.c +++ b/drivers/regulator/max8997.c @@ -953,7 +953,8 @@ static int max8997_pmic_dt_parse_pdata(struct platform_device *pdev, rdata->id = i; rdata->initdata = of_get_regulator_init_data(&pdev->dev, - reg_np); + reg_np, + ®ulators[i]); rdata->reg_node = reg_np; rdata++; } diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c index 961091b4655..59e34a05a4a 100644 --- a/drivers/regulator/max8998.c +++ b/drivers/regulator/max8998.c @@ -686,8 +686,9 @@ static int max8998_pmic_dt_parse_pdata(struct max8998_dev *iodev, continue; rdata->id = regulators[i].id; - rdata->initdata = of_get_regulator_init_data( - iodev->dev, reg_np); + rdata->initdata = of_get_regulator_init_data(iodev->dev, + reg_np, + ®ulators[i]); rdata->reg_node = reg_np; ++rdata; } diff --git a/drivers/regulator/mc13xxx-regulator-core.c b/drivers/regulator/mc13xxx-regulator-core.c index afba024953e..0281c31ae2e 100644 --- a/drivers/regulator/mc13xxx-regulator-core.c +++ b/drivers/regulator/mc13xxx-regulator-core.c @@ -194,7 +194,8 @@ struct mc13xxx_regulator_init_data *mc13xxx_parse_regulators_dt( regulators[i].desc.name)) { p->id = i; p->init_data = of_get_regulator_init_data( - &pdev->dev, child); + &pdev->dev, child, + ®ulators[i].desc); p->node = child; p++; diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c index 5a1d4afa477..91eaaf01052 100644 --- a/drivers/regulator/of_regulator.c +++ b/drivers/regulator/of_regulator.c @@ -19,12 +19,20 @@ #include "internal.h" +static const char *const regulator_states[PM_SUSPEND_MAX + 1] = { + [PM_SUSPEND_MEM] = "regulator-state-mem", + [PM_SUSPEND_MAX] = "regulator-state-disk", +}; + static void of_get_regulation_constraints(struct device_node *np, - struct regulator_init_data **init_data) + struct regulator_init_data **init_data, + const struct regulator_desc *desc) { const __be32 *min_uV, *max_uV; struct regulation_constraints *constraints = &(*init_data)->constraints; - int ret; + struct regulator_state *suspend_state; + struct device_node *suspend_np; + int ret, i; u32 pval; constraints->name = of_get_property(np, "regulator-name", NULL); @@ -73,18 +81,84 @@ static void of_get_regulation_constraints(struct device_node *np, ret = of_property_read_u32(np, "regulator-enable-ramp-delay", &pval); if (!ret) constraints->enable_time = pval; + + if (!of_property_read_u32(np, "regulator-initial-mode", &pval)) { + if (desc && desc->of_map_mode) { + ret = desc->of_map_mode(pval); + if (ret == -EINVAL) + pr_err("%s: invalid mode %u\n", np->name, pval); + else + constraints->initial_mode = ret; + } else { + pr_warn("%s: mapping for mode %d not defined\n", + np->name, pval); + } + } + + for (i = 0; i < ARRAY_SIZE(regulator_states); i++) { + switch (i) { + case PM_SUSPEND_MEM: + suspend_state = &constraints->state_mem; + break; + case PM_SUSPEND_MAX: + suspend_state = &constraints->state_disk; + break; + case PM_SUSPEND_ON: + case PM_SUSPEND_FREEZE: + case PM_SUSPEND_STANDBY: + default: + continue; + }; + + suspend_np = of_get_child_by_name(np, regulator_states[i]); + if (!suspend_np || !suspend_state) + continue; + + if (!of_property_read_u32(suspend_np, "regulator-mode", + &pval)) { + if (desc && desc->of_map_mode) { + ret = desc->of_map_mode(pval); + if (ret == -EINVAL) + pr_err("%s: invalid mode %u\n", + np->name, pval); + else + suspend_state->mode = ret; + } else { + pr_warn("%s: mapping for mode %d not defined\n", + np->name, pval); + } + } + + if (of_property_read_bool(suspend_np, + "regulator-on-in-suspend")) + suspend_state->enabled = true; + else if (of_property_read_bool(suspend_np, + "regulator-off-in-suspend")) + suspend_state->disabled = true; + + if (!of_property_read_u32(suspend_np, + "regulator-suspend-microvolt", &pval)) + suspend_state->uV = pval; + + of_node_put(suspend_np); + suspend_state = NULL; + suspend_np = NULL; + } } /** * of_get_regulator_init_data - extract regulator_init_data structure info * @dev: device requesting for regulator_init_data + * @node: regulator device node + * @desc: regulator description * * Populates regulator_init_data structure by extracting data from device * tree node, returns a pointer to the populated struture or NULL if memory * alloc fails. */ struct regulator_init_data *of_get_regulator_init_data(struct device *dev, - struct device_node *node) + struct device_node *node, + const struct regulator_desc *desc) { struct regulator_init_data *init_data; @@ -95,7 +169,7 @@ struct regulator_init_data *of_get_regulator_init_data(struct device *dev, if (!init_data) return NULL; /* Out of memory? */ - of_get_regulation_constraints(node, &init_data); + of_get_regulation_constraints(node, &init_data, desc); return init_data; } EXPORT_SYMBOL_GPL(of_get_regulator_init_data); @@ -176,7 +250,8 @@ int of_regulator_match(struct device *dev, struct device_node *node, continue; match->init_data = - of_get_regulator_init_data(dev, child); + of_get_regulator_init_data(dev, child, + match->desc); if (!match->init_data) { dev_err(dev, "failed to parse DT for regulator %s\n", @@ -224,7 +299,7 @@ struct regulator_init_data *regulator_of_get_init_data(struct device *dev, if (strcmp(desc->of_match, name)) continue; - init_data = of_get_regulator_init_data(dev, child); + init_data = of_get_regulator_init_data(dev, child, desc); if (!init_data) { dev_err(dev, "failed to parse DT for regulator %s\n", diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c index d3f55eaea05..91f34ca3a9a 100644 --- a/drivers/regulator/pwm-regulator.c +++ b/drivers/regulator/pwm-regulator.c @@ -149,7 +149,8 @@ static int pwm_regulator_probe(struct platform_device *pdev) return ret; } - config.init_data = of_get_regulator_init_data(&pdev->dev, np); + config.init_data = of_get_regulator_init_data(&pdev->dev, np, + &drvdata->desc); if (!config.init_data) return -ENOMEM; diff --git a/drivers/regulator/qcom_rpm-regulator.c b/drivers/regulator/qcom_rpm-regulator.c index b55cd5b50eb..183598b111f 100644 --- a/drivers/regulator/qcom_rpm-regulator.c +++ b/drivers/regulator/qcom_rpm-regulator.c @@ -183,6 +183,13 @@ static const struct regulator_linear_range ftsmps_ranges[] = { REGULATOR_LINEAR_RANGE(1500000, 64, 100, 50000), }; +static const struct regulator_linear_range smb208_ranges[] = { + REGULATOR_LINEAR_RANGE( 375000, 0, 29, 12500), + REGULATOR_LINEAR_RANGE( 750000, 30, 89, 12500), + REGULATOR_LINEAR_RANGE(1500000, 90, 153, 25000), + REGULATOR_LINEAR_RANGE(3100000, 154, 234, 25000), +}; + static const struct regulator_linear_range ncp_ranges[] = { REGULATOR_LINEAR_RANGE(1500000, 0, 31, 50000), }; @@ -559,6 +566,16 @@ static const struct qcom_rpm_reg pm8921_switch = { .parts = &rpm8960_switch_parts, }; +static const struct qcom_rpm_reg smb208_smps = { + .desc.linear_ranges = smb208_ranges, + .desc.n_linear_ranges = ARRAY_SIZE(smb208_ranges), + .desc.n_voltages = 235, + .desc.ops = &uV_ops, + .parts = &rpm8960_smps_parts, + .supports_force_mode_auto = false, + .supports_force_mode_bypass = false, +}; + static const struct of_device_id rpm_of_match[] = { { .compatible = "qcom,rpm-pm8058-pldo", .data = &pm8058_pldo }, { .compatible = "qcom,rpm-pm8058-nldo", .data = &pm8058_nldo }, @@ -578,6 +595,8 @@ static const struct of_device_id rpm_of_match[] = { { .compatible = "qcom,rpm-pm8921-ftsmps", .data = &pm8921_ftsmps }, { .compatible = "qcom,rpm-pm8921-ncp", .data = &pm8921_ncp }, { .compatible = "qcom,rpm-pm8921-switch", .data = &pm8921_switch }, + + { .compatible = "qcom,rpm-smb208", .data = &smb208_smps }, { } }; MODULE_DEVICE_TABLE(of, rpm_of_match); @@ -643,10 +662,6 @@ static int rpm_reg_probe(struct platform_device *pdev) match = of_match_device(rpm_of_match, &pdev->dev); template = match->data; - initdata = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node); - if (!initdata) - return -EINVAL; - vreg = devm_kmalloc(&pdev->dev, sizeof(*vreg), GFP_KERNEL); if (!vreg) { dev_err(&pdev->dev, "failed to allocate vreg\n"); @@ -666,6 +681,11 @@ static int rpm_reg_probe(struct platform_device *pdev) return -ENODEV; } + initdata = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node, + &vreg->desc); + if (!initdata) + return -EINVAL; + key = "reg"; ret = of_property_read_u32(pdev->dev.of_node, key, &val); if (ret) { diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c index 196a5c8838c..ea9d05eabd0 100644 --- a/drivers/regulator/rk808-regulator.c +++ b/drivers/regulator/rk808-regulator.c @@ -36,6 +36,12 @@ #define RK808_RAMP_RATE_6MV_PER_US (2 << RK808_RAMP_RATE_OFFSET) #define RK808_RAMP_RATE_10MV_PER_US (3 << RK808_RAMP_RATE_OFFSET) +/* Offset from XXX_ON_VSEL to XXX_SLP_VSEL */ +#define RK808_SLP_REG_OFFSET 1 + +/* Offset from XXX_EN_REG to SLEEP_SET_OFF_XXX */ +#define RK808_SLP_SET_OFF_REG_OFFSET 2 + static const int rk808_buck_config_regs[] = { RK808_BUCK1_CONFIG_REG, RK808_BUCK2_CONFIG_REG, @@ -91,6 +97,43 @@ static int rk808_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) RK808_RAMP_RATE_MASK, ramp_value); } +int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv) +{ + unsigned int reg; + int sel = regulator_map_voltage_linear_range(rdev, uv, uv); + + if (sel < 0) + return -EINVAL; + + reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET; + + return regmap_update_bits(rdev->regmap, reg, + rdev->desc->vsel_mask, + sel); +} + +int rk808_set_suspend_enable(struct regulator_dev *rdev) +{ + unsigned int reg; + + reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET; + + return regmap_update_bits(rdev->regmap, reg, + rdev->desc->enable_mask, + 0); +} + +int rk808_set_suspend_disable(struct regulator_dev *rdev) +{ + unsigned int reg; + + reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET; + + return regmap_update_bits(rdev->regmap, reg, + rdev->desc->enable_mask, + rdev->desc->enable_mask); +} + static struct regulator_ops rk808_buck1_2_ops = { .list_voltage = regulator_list_voltage_linear_range, .map_voltage = regulator_map_voltage_linear_range, @@ -100,6 +143,9 @@ static struct regulator_ops rk808_buck1_2_ops = { .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, .set_ramp_delay = rk808_set_ramp_delay, + .set_suspend_voltage = rk808_set_suspend_voltage, + .set_suspend_enable = rk808_set_suspend_enable, + .set_suspend_disable = rk808_set_suspend_disable, }; static struct regulator_ops rk808_reg_ops = { @@ -110,12 +156,17 @@ static struct regulator_ops rk808_reg_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, + .set_suspend_voltage = rk808_set_suspend_voltage, + .set_suspend_enable = rk808_set_suspend_enable, + .set_suspend_disable = rk808_set_suspend_disable, }; static struct regulator_ops rk808_switch_ops = { - .enable = regulator_enable_regmap, - .disable = regulator_disable_regmap, - .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_suspend_enable = rk808_set_suspend_enable, + .set_suspend_disable = rk808_set_suspend_disable, }; static const struct regulator_desc rk808_reg[] = { diff --git a/drivers/regulator/rn5t618-regulator.c b/drivers/regulator/rn5t618-regulator.c index e58d79aeb39..b85ceb8ff91 100644 --- a/drivers/regulator/rn5t618-regulator.c +++ b/drivers/regulator/rn5t618-regulator.c @@ -31,6 +31,8 @@ static struct regulator_ops rn5t618_reg_ops = { #define REG(rid, ereg, emask, vreg, vmask, min, max, step) \ [RN5T618_##rid] = { \ .name = #rid, \ + .of_match = of_match_ptr(#rid), \ + .regulators_node = of_match_ptr("regulators"), \ .id = RN5T618_##rid, \ .type = REGULATOR_VOLTAGE, \ .owner = THIS_MODULE, \ @@ -60,60 +62,15 @@ static struct regulator_desc rn5t618_regulators[] = { REG(LDORTC2, LDOEN2, BIT(5), LDORTC2DAC, 0x7f, 900000, 3500000, 25000), }; -static struct of_regulator_match rn5t618_matches[] = { - [RN5T618_DCDC1] = { .name = "DCDC1" }, - [RN5T618_DCDC2] = { .name = "DCDC2" }, - [RN5T618_DCDC3] = { .name = "DCDC3" }, - [RN5T618_LDO1] = { .name = "LDO1" }, - [RN5T618_LDO2] = { .name = "LDO2" }, - [RN5T618_LDO3] = { .name = "LDO3" }, - [RN5T618_LDO4] = { .name = "LDO4" }, - [RN5T618_LDO5] = { .name = "LDO5" }, - [RN5T618_LDORTC1] = { .name = "LDORTC1" }, - [RN5T618_LDORTC2] = { .name = "LDORTC2" }, -}; - -static int rn5t618_regulator_parse_dt(struct platform_device *pdev) -{ - struct device_node *np, *regulators; - int ret; - - np = of_node_get(pdev->dev.parent->of_node); - if (!np) - return 0; - - regulators = of_get_child_by_name(np, "regulators"); - if (!regulators) { - dev_err(&pdev->dev, "regulators node not found\n"); - return -EINVAL; - } - - ret = of_regulator_match(&pdev->dev, regulators, rn5t618_matches, - ARRAY_SIZE(rn5t618_matches)); - of_node_put(regulators); - if (ret < 0) { - dev_err(&pdev->dev, "error parsing regulator init data: %d\n", - ret); - } - - return 0; -} - static int rn5t618_regulator_probe(struct platform_device *pdev) { struct rn5t618 *rn5t618 = dev_get_drvdata(pdev->dev.parent); struct regulator_config config = { }; struct regulator_dev *rdev; - int ret, i; - - ret = rn5t618_regulator_parse_dt(pdev); - if (ret) - return ret; + int i; for (i = 0; i < RN5T618_REG_NUM; i++) { - config.dev = &pdev->dev; - config.init_data = rn5t618_matches[i].init_data; - config.of_node = rn5t618_matches[i].of_node; + config.dev = pdev->dev.parent; config.regmap = rn5t618->regmap; rdev = devm_regulator_register(&pdev->dev, diff --git a/drivers/regulator/rt5033-regulator.c b/drivers/regulator/rt5033-regulator.c new file mode 100644 index 00000000000..870cc49438d --- /dev/null +++ b/drivers/regulator/rt5033-regulator.c @@ -0,0 +1,123 @@ +/* + * Regulator driver for the Richtek RT5033 + * + * Copyright (C) 2014 Samsung Electronics, Co., Ltd. + * Author: Beomho Seo <beomho.seo@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published bythe Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/mfd/rt5033.h> +#include <linux/mfd/rt5033-private.h> +#include <linux/regulator/of_regulator.h> + +static struct regulator_ops rt5033_safe_ldo_ops = { + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .list_voltage = regulator_list_voltage_linear, +}; + +static struct regulator_ops rt5033_buck_ops = { + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, +}; + +static const struct regulator_desc rt5033_supported_regulators[] = { + [RT5033_BUCK] = { + .name = "BUCK", + .id = RT5033_BUCK, + .ops = &rt5033_buck_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .n_voltages = RT5033_REGULATOR_BUCK_VOLTAGE_STEP_NUM, + .min_uV = RT5033_REGULATOR_BUCK_VOLTAGE_MIN, + .uV_step = RT5033_REGULATOR_BUCK_VOLTAGE_STEP, + .enable_reg = RT5033_REG_CTRL, + .enable_mask = RT5033_CTRL_EN_BUCK_MASK, + .vsel_reg = RT5033_REG_BUCK_CTRL, + .vsel_mask = RT5033_BUCK_CTRL_MASK, + }, + [RT5033_LDO] = { + .name = "LDO", + .id = RT5033_LDO, + .ops = &rt5033_buck_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .n_voltages = RT5033_REGULATOR_LDO_VOLTAGE_STEP_NUM, + .min_uV = RT5033_REGULATOR_LDO_VOLTAGE_MIN, + .uV_step = RT5033_REGULATOR_LDO_VOLTAGE_STEP, + .enable_reg = RT5033_REG_CTRL, + .enable_mask = RT5033_CTRL_EN_LDO_MASK, + .vsel_reg = RT5033_REG_LDO_CTRL, + .vsel_mask = RT5033_LDO_CTRL_MASK, + }, + [RT5033_SAFE_LDO] = { + .name = "SAFE_LDO", + .id = RT5033_SAFE_LDO, + .ops = &rt5033_safe_ldo_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .n_voltages = 1, + .min_uV = RT5033_REGULATOR_SAFE_LDO_VOLTAGE, + .enable_reg = RT5033_REG_CTRL, + .enable_mask = RT5033_CTRL_EN_SAFE_LDO_MASK, + }, +}; + +static int rt5033_regulator_probe(struct platform_device *pdev) +{ + struct rt5033_dev *rt5033 = dev_get_drvdata(pdev->dev.parent); + int ret, i; + struct regulator_config config = {}; + + config.dev = &pdev->dev; + config.driver_data = rt5033; + + for (i = 0; i < ARRAY_SIZE(rt5033_supported_regulators); i++) { + struct regulator_dev *regulator; + + config.regmap = rt5033->regmap; + + regulator = devm_regulator_register(&pdev->dev, + &rt5033_supported_regulators[i], &config); + if (IS_ERR(regulator)) { + ret = PTR_ERR(regulator); + dev_err(&pdev->dev, + "Regulator init failed %d: with error: %d\n", + i, ret); + return ret; + } + } + + return 0; +} + +static const struct platform_device_id rt5033_regulator_id[] = { + { "rt5033-regulator", }, + { } +}; +MODULE_DEVICE_TABLE(platform, rt5033_regulator_id); + +static struct platform_driver rt5033_regulator_driver = { + .driver = { + .name = "rt5033-regulator", + }, + .probe = rt5033_regulator_probe, + .id_table = rt5033_regulator_id, +}; +module_platform_driver(rt5033_regulator_driver); + +MODULE_DESCRIPTION("Richtek RT5033 Regulator driver"); +MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/regulator/s2mpa01.c b/drivers/regulator/s2mpa01.c index 7633b9bfbe6..5db4e12a7e0 100644 --- a/drivers/regulator/s2mpa01.c +++ b/drivers/regulator/s2mpa01.c @@ -298,7 +298,7 @@ static struct regulator_ops s2mpa01_buck_ops = { .enable_mask = S2MPA01_ENABLE_MASK \ } -static struct regulator_desc regulators[] = { +static const struct regulator_desc regulators[] = { regulator_desc_ldo(1, STEP_25_MV), regulator_desc_ldo(2, STEP_50_MV), regulator_desc_ldo(3, STEP_50_MV), diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c index 738dc7763d4..b345cf51225 100644 --- a/drivers/regulator/s2mps11.c +++ b/drivers/regulator/s2mps11.c @@ -940,7 +940,7 @@ static int s2mps11_pmic_probe(struct platform_device *pdev) return -EINVAL; }; - s2mps11->ext_control_gpio = devm_kzalloc(&pdev->dev, + s2mps11->ext_control_gpio = devm_kmalloc(&pdev->dev, sizeof(*s2mps11->ext_control_gpio) * s2mps11->rdev_num, GFP_KERNEL); if (!s2mps11->ext_control_gpio) @@ -981,6 +981,7 @@ common_reg: config.regmap = iodev->regmap_pmic; config.driver_data = s2mps11; config.ena_gpio_flags = GPIOF_OUT_INIT_HIGH; + config.ena_gpio_initialized = true; for (i = 0; i < s2mps11->rdev_num; i++) { struct regulator_dev *regulator; diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c index 0ab5cbeeb79..dc1328c0c71 100644 --- a/drivers/regulator/s5m8767.c +++ b/drivers/regulator/s5m8767.c @@ -581,7 +581,8 @@ static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev, rdata->id = i; rdata->initdata = of_get_regulator_init_data( - &pdev->dev, reg_np); + &pdev->dev, reg_np, + ®ulators[i]); rdata->reg_node = reg_np; rdata++; rmode->id = i; @@ -950,6 +951,7 @@ static int s5m8767_pmic_probe(struct platform_device *pdev) config.of_node = pdata->regulators[i].reg_node; config.ena_gpio = -EINVAL; config.ena_gpio_flags = 0; + config.ena_gpio_initialized = true; if (gpio_is_valid(pdata->regulators[i].ext_control_gpio)) s5m8767_regulator_config_ext_control(s5m8767, &pdata->regulators[i], &config); diff --git a/drivers/regulator/sky81452-regulator.c b/drivers/regulator/sky81452-regulator.c index 97aff0ccd65..64786061191 100644 --- a/drivers/regulator/sky81452-regulator.c +++ b/drivers/regulator/sky81452-regulator.c @@ -5,9 +5,8 @@ * Author : Gyungoh Yoo <jack.yoo@skyworksinc.com> * * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. + * under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of @@ -52,6 +51,8 @@ static const struct regulator_linear_range sky81452_reg_ranges[] = { static const struct regulator_desc sky81452_reg = { .name = "LOUT", + .of_match = of_match_ptr("lout"), + .regulators_node = of_match_ptr("regulator"), .ops = &sky81452_reg_ops, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, @@ -64,30 +65,6 @@ static const struct regulator_desc sky81452_reg = { .enable_mask = SKY81452_LEN, }; -#ifdef CONFIG_OF -static struct regulator_init_data *sky81452_reg_parse_dt(struct device *dev) -{ - struct regulator_init_data *init_data; - struct device_node *np; - - np = of_get_child_by_name(dev->parent->of_node, "regulator"); - if (unlikely(!np)) { - dev_err(dev, "regulator node not found"); - return NULL; - } - - init_data = of_get_regulator_init_data(dev, np); - - of_node_put(np); - return init_data; -} -#else -static struct regulator_init_data *sky81452_reg_parse_dt(struct device *dev) -{ - return ERR_PTR(-EINVAL); -} -#endif - static int sky81452_reg_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -95,20 +72,16 @@ static int sky81452_reg_probe(struct platform_device *pdev) struct regulator_config config = { }; struct regulator_dev *rdev; - if (!init_data) { - init_data = sky81452_reg_parse_dt(dev); - if (IS_ERR(init_data)) - return PTR_ERR(init_data); - } - - config.dev = dev; + config.dev = dev->parent; config.init_data = init_data; config.of_node = dev->of_node; config.regmap = dev_get_drvdata(dev->parent); rdev = devm_regulator_register(dev, &sky81452_reg, &config); - if (IS_ERR(rdev)) + if (IS_ERR(rdev)) { + dev_err(dev, "failed to register. err=%ld\n", PTR_ERR(rdev)); return PTR_ERR(rdev); + } platform_set_drvdata(pdev, rdev); @@ -126,5 +99,4 @@ module_platform_driver(sky81452_reg_driver); MODULE_DESCRIPTION("Skyworks SKY81452 Regulator driver"); MODULE_AUTHOR("Gyungoh Yoo <jack.yoo@skyworksinc.com>"); -MODULE_LICENSE("GPL"); -MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/regulator/stw481x-vmmc.c b/drivers/regulator/stw481x-vmmc.c index a7e152696a0..b4f1696456a 100644 --- a/drivers/regulator/stw481x-vmmc.c +++ b/drivers/regulator/stw481x-vmmc.c @@ -72,7 +72,8 @@ static int stw481x_vmmc_regulator_probe(struct platform_device *pdev) config.regmap = stw481x->map; config.of_node = pdev->dev.of_node; config.init_data = of_get_regulator_init_data(&pdev->dev, - pdev->dev.of_node); + pdev->dev.of_node, + &vmmc_regulator); stw481x->vmmc_regulator = devm_regulator_register(&pdev->dev, &vmmc_regulator, &config); diff --git a/drivers/regulator/ti-abb-regulator.c b/drivers/regulator/ti-abb-regulator.c index a2dabb575b9..1ef5aba96f1 100644 --- a/drivers/regulator/ti-abb-regulator.c +++ b/drivers/regulator/ti-abb-regulator.c @@ -837,7 +837,8 @@ skip_opt: return -EINVAL; } - initdata = of_get_regulator_init_data(dev, pdev->dev.of_node); + initdata = of_get_regulator_init_data(dev, pdev->dev.of_node, + &abb->rdesc); if (!initdata) { dev_err(dev, "%s: Unable to alloc regulator init data\n", __func__); diff --git a/drivers/regulator/tps51632-regulator.c b/drivers/regulator/tps51632-regulator.c index f31f22e3e1b..c213e37eb69 100644 --- a/drivers/regulator/tps51632-regulator.c +++ b/drivers/regulator/tps51632-regulator.c @@ -221,7 +221,8 @@ static const struct of_device_id tps51632_of_match[] = { MODULE_DEVICE_TABLE(of, tps51632_of_match); static struct tps51632_regulator_platform_data * - of_get_tps51632_platform_data(struct device *dev) + of_get_tps51632_platform_data(struct device *dev, + const struct regulator_desc *desc) { struct tps51632_regulator_platform_data *pdata; struct device_node *np = dev->of_node; @@ -230,7 +231,8 @@ static struct tps51632_regulator_platform_data * if (!pdata) return NULL; - pdata->reg_init_data = of_get_regulator_init_data(dev, dev->of_node); + pdata->reg_init_data = of_get_regulator_init_data(dev, dev->of_node, + desc); if (!pdata->reg_init_data) { dev_err(dev, "Not able to get OF regulator init data\n"); return NULL; @@ -248,7 +250,8 @@ static struct tps51632_regulator_platform_data * } #else static struct tps51632_regulator_platform_data * - of_get_tps51632_platform_data(struct device *dev) + of_get_tps51632_platform_data(struct device *dev, + const struct regulator_desc *desc) { return NULL; } @@ -273,9 +276,25 @@ static int tps51632_probe(struct i2c_client *client, } } + tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL); + if (!tps) + return -ENOMEM; + + tps->dev = &client->dev; + tps->desc.name = client->name; + tps->desc.id = 0; + tps->desc.ramp_delay = TPS51632_DEFAULT_RAMP_DELAY; + tps->desc.min_uV = TPS51632_MIN_VOLTAGE; + tps->desc.uV_step = TPS51632_VOLTAGE_STEP_10mV; + tps->desc.linear_min_sel = TPS51632_MIN_VSEL; + tps->desc.n_voltages = TPS51632_MAX_VSEL + 1; + tps->desc.ops = &tps51632_dcdc_ops; + tps->desc.type = REGULATOR_VOLTAGE; + tps->desc.owner = THIS_MODULE; + pdata = dev_get_platdata(&client->dev); if (!pdata && client->dev.of_node) - pdata = of_get_tps51632_platform_data(&client->dev); + pdata = of_get_tps51632_platform_data(&client->dev, &tps->desc); if (!pdata) { dev_err(&client->dev, "No Platform data\n"); return -EINVAL; @@ -296,22 +315,6 @@ static int tps51632_probe(struct i2c_client *client, } } - tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL); - if (!tps) - return -ENOMEM; - - tps->dev = &client->dev; - tps->desc.name = client->name; - tps->desc.id = 0; - tps->desc.ramp_delay = TPS51632_DEFAULT_RAMP_DELAY; - tps->desc.min_uV = TPS51632_MIN_VOLTAGE; - tps->desc.uV_step = TPS51632_VOLTAGE_STEP_10mV; - tps->desc.linear_min_sel = TPS51632_MIN_VSEL; - tps->desc.n_voltages = TPS51632_MAX_VSEL + 1; - tps->desc.ops = &tps51632_dcdc_ops; - tps->desc.type = REGULATOR_VOLTAGE; - tps->desc.owner = THIS_MODULE; - if (pdata->enable_pwm_dvfs) tps->desc.vsel_reg = TPS51632_VOLTAGE_BASE_REG; else diff --git a/drivers/regulator/tps62360-regulator.c b/drivers/regulator/tps62360-regulator.c index a1672044e51..a1fd626c6c9 100644 --- a/drivers/regulator/tps62360-regulator.c +++ b/drivers/regulator/tps62360-regulator.c @@ -293,7 +293,8 @@ static const struct regmap_config tps62360_regmap_config = { }; static struct tps62360_regulator_platform_data * - of_get_tps62360_platform_data(struct device *dev) + of_get_tps62360_platform_data(struct device *dev, + const struct regulator_desc *desc) { struct tps62360_regulator_platform_data *pdata; struct device_node *np = dev->of_node; @@ -302,7 +303,8 @@ static struct tps62360_regulator_platform_data * if (!pdata) return NULL; - pdata->reg_init_data = of_get_regulator_init_data(dev, dev->of_node); + pdata->reg_init_data = of_get_regulator_init_data(dev, dev->of_node, + desc); if (!pdata->reg_init_data) { dev_err(dev, "Not able to get OF regulator init data\n"); return NULL; @@ -350,6 +352,17 @@ static int tps62360_probe(struct i2c_client *client, pdata = dev_get_platdata(&client->dev); + tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL); + if (!tps) + return -ENOMEM; + + tps->desc.name = client->name; + tps->desc.id = 0; + tps->desc.ops = &tps62360_dcdc_ops; + tps->desc.type = REGULATOR_VOLTAGE; + tps->desc.owner = THIS_MODULE; + tps->desc.uV_step = 10000; + if (client->dev.of_node) { const struct of_device_id *match; match = of_match_device(of_match_ptr(tps62360_of_match), @@ -360,7 +373,8 @@ static int tps62360_probe(struct i2c_client *client, } chip_id = (int)(long)match->data; if (!pdata) - pdata = of_get_tps62360_platform_data(&client->dev); + pdata = of_get_tps62360_platform_data(&client->dev, + &tps->desc); } else if (id) { chip_id = id->driver_data; } else { @@ -374,10 +388,6 @@ static int tps62360_probe(struct i2c_client *client, return -EIO; } - tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL); - if (!tps) - return -ENOMEM; - tps->en_discharge = pdata->en_discharge; tps->en_internal_pulldn = pdata->en_internal_pulldn; tps->vsel0_gpio = pdata->vsel0_gpio; @@ -401,13 +411,6 @@ static int tps62360_probe(struct i2c_client *client, return -ENODEV; } - tps->desc.name = client->name; - tps->desc.id = 0; - tps->desc.ops = &tps62360_dcdc_ops; - tps->desc.type = REGULATOR_VOLTAGE; - tps->desc.owner = THIS_MODULE; - tps->desc.uV_step = 10000; - tps->regmap = devm_regmap_init_i2c(client, &tps62360_regmap_config); if (IS_ERR(tps->regmap)) { ret = PTR_ERR(tps->regmap); diff --git a/drivers/regulator/tps65090-regulator.c b/drivers/regulator/tps65090-regulator.c index d5df1e9ad1d..f1df4423d36 100644 --- a/drivers/regulator/tps65090-regulator.c +++ b/drivers/regulator/tps65090-regulator.c @@ -312,7 +312,11 @@ static void tps65090_configure_regulator_config( gpio_flag = GPIOF_OUT_INIT_HIGH; config->ena_gpio = tps_pdata->gpio; + config->ena_gpio_initialized = true; config->ena_gpio_flags = gpio_flag; + } else { + config->ena_gpio = -EINVAL; + config->ena_gpio_initialized = false; } } diff --git a/drivers/regulator/tps65218-regulator.c b/drivers/regulator/tps65218-regulator.c index f0a40281b9c..263cc85d620 100644 --- a/drivers/regulator/tps65218-regulator.c +++ b/drivers/regulator/tps65218-regulator.c @@ -231,7 +231,8 @@ static int tps65218_regulator_probe(struct platform_device *pdev) template = match->data; id = template->id; - init_data = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node); + init_data = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node, + ®ulators[id]); platform_set_drvdata(pdev, tps); diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index 0b4f8660fdb..dd727bca198 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -1104,7 +1104,8 @@ static int twlreg_probe(struct platform_device *pdev) template = match->data; id = template->desc.id; initdata = of_get_regulator_init_data(&pdev->dev, - pdev->dev.of_node); + pdev->dev.of_node, + &template->desc); drvdata = NULL; } else { id = pdev->id; diff --git a/drivers/regulator/vexpress.c b/drivers/regulator/vexpress.c index 02e7267ccf9..5e7c789023a 100644 --- a/drivers/regulator/vexpress.c +++ b/drivers/regulator/vexpress.c @@ -74,7 +74,8 @@ static int vexpress_regulator_probe(struct platform_device *pdev) reg->desc.owner = THIS_MODULE; reg->desc.continuous_voltage_range = true; - init_data = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node); + init_data = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node, + ®->desc); if (!init_data) return -EINVAL; diff --git a/drivers/regulator/wm8994-regulator.c b/drivers/regulator/wm8994-regulator.c index c24346db8a7..88f5064e412 100644 --- a/drivers/regulator/wm8994-regulator.c +++ b/drivers/regulator/wm8994-regulator.c @@ -145,10 +145,12 @@ static int wm8994_ldo_probe(struct platform_device *pdev) config.driver_data = ldo; config.regmap = wm8994->regmap; config.init_data = &ldo->init_data; - if (pdata) + if (pdata) { config.ena_gpio = pdata->ldo[id].enable; - else if (wm8994->dev->of_node) + } else if (wm8994->dev->of_node) { config.ena_gpio = wm8994->pdata.ldo[id].enable; + config.ena_gpio_initialized = true; + } /* Use default constraints if none set up */ if (!pdata || !pdata->ldo[id].init_data || wm8994->dev->of_node) { diff --git a/include/dt-bindings/regulator/maxim,max77802.h b/include/dt-bindings/regulator/maxim,max77802.h new file mode 100644 index 00000000000..cf28631d710 --- /dev/null +++ b/include/dt-bindings/regulator/maxim,max77802.h @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2014 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Device Tree binding constants for the Maxim 77802 PMIC regulators + */ + +#ifndef _DT_BINDINGS_REGULATOR_MAXIM_MAX77802_H +#define _DT_BINDINGS_REGULATOR_MAXIM_MAX77802_H + +/* Regulator operating modes */ +#define MAX77802_OPMODE_LP 1 +#define MAX77802_OPMODE_NORMAL 3 + +#endif /* _DT_BINDINGS_REGULATOR_MAXIM_MAX77802_H */ diff --git a/include/linux/mfd/max77686.h b/include/linux/mfd/max77686.h index 7e6dc4b2b79..553f7d09258 100644 --- a/include/linux/mfd/max77686.h +++ b/include/linux/mfd/max77686.h @@ -131,13 +131,6 @@ enum max77686_opmode { MAX77686_OPMODE_STANDBY, }; -enum max77802_opmode { - MAX77802_OPMODE_OFF, - MAX77802_OPMODE_STANDBY, - MAX77802_OPMODE_LP, - MAX77802_OPMODE_NORMAL, -}; - struct max77686_opmode_data { int id; int mode; diff --git a/include/linux/of.h b/include/linux/of.h index 364a1585874..c55b50018ac 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -923,14 +923,14 @@ static inline int of_changeset_update_property(struct of_changeset *ocs, extern int of_resolve_phandles(struct device_node *tree); /** - * of_system_has_poweroff_source - Tells if poweroff-source is found for device_node + * of_device_is_system_power_controller - Tells if system-power-controller is found for device_node * @np: Pointer to the given device_node * * return true if present false otherwise */ -static inline bool of_system_has_poweroff_source(const struct device_node *np) +static inline bool of_device_is_system_power_controller(const struct device_node *np) { - return of_property_read_bool(np, "poweroff-source"); + return of_property_read_bool(np, "system-power-controller"); } #endif /* _LINUX_OF_H */ diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index f540b1496e2..d17e1ff7ad0 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -101,6 +101,8 @@ struct regmap; * Data passed is "struct pre_voltage_change_data" * ABORT_VOLTAGE_CHANGE Regulator voltage change failed for some reason. * Data passed is old voltage cast to (void *). + * PRE_DISABLE Regulator is about to be disabled + * ABORT_DISABLE Regulator disable failed for some reason * * NOTE: These events can be OR'ed together when passed into handler. */ @@ -115,6 +117,8 @@ struct regmap; #define REGULATOR_EVENT_DISABLE 0x80 #define REGULATOR_EVENT_PRE_VOLTAGE_CHANGE 0x100 #define REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE 0x200 +#define REGULATOR_EVENT_PRE_DISABLE 0x400 +#define REGULATOR_EVENT_ABORT_DISABLE 0x800 /** * struct pre_voltage_change_data - Data sent with PRE_VOLTAGE_CHANGE event @@ -284,7 +288,7 @@ devm_regulator_get(struct device *dev, const char *id) static inline struct regulator *__must_check regulator_get_exclusive(struct device *dev, const char *id) { - return NULL; + return ERR_PTR(-ENODEV); } static inline struct regulator *__must_check diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index fc0ee0ce832..5f1e9ca4741 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -243,6 +243,8 @@ enum regulator_type { * * @enable_time: Time taken for initial enable of regulator (in uS). * @off_on_delay: guard time (in uS), before re-enabling a regulator + * + * @of_map_mode: Maps a hardware mode defined in a DeviceTree to a standard mode */ struct regulator_desc { const char *name; @@ -285,6 +287,8 @@ struct regulator_desc { unsigned int enable_time; unsigned int off_on_delay; + + unsigned int (*of_map_mode)(unsigned int mode); }; /** @@ -301,6 +305,9 @@ struct regulator_desc { * NULL). * @regmap: regmap to use for core regmap helpers if dev_get_regulator() is * insufficient. + * @ena_gpio_initialized: GPIO controlling regulator enable was properly + * initialized, meaning that >= 0 is a valid gpio + * identifier and < 0 is a non existent gpio. * @ena_gpio: GPIO controlling regulator enable. * @ena_gpio_invert: Sense for GPIO enable control. * @ena_gpio_flags: Flags to use when calling gpio_request_one() @@ -312,6 +319,7 @@ struct regulator_config { struct device_node *of_node; struct regmap *regmap; + bool ena_gpio_initialized; int ena_gpio; unsigned int ena_gpio_invert:1; unsigned int ena_gpio_flags; diff --git a/include/linux/regulator/of_regulator.h b/include/linux/regulator/of_regulator.h index f9217965aaa..763953f7e3b 100644 --- a/include/linux/regulator/of_regulator.h +++ b/include/linux/regulator/of_regulator.h @@ -6,24 +6,29 @@ #ifndef __LINUX_OF_REG_H #define __LINUX_OF_REG_H +struct regulator_desc; + struct of_regulator_match { const char *name; void *driver_data; struct regulator_init_data *init_data; struct device_node *of_node; + const struct regulator_desc *desc; }; #if defined(CONFIG_OF) extern struct regulator_init_data *of_get_regulator_init_data(struct device *dev, - struct device_node *node); + struct device_node *node, + const struct regulator_desc *desc); extern int of_regulator_match(struct device *dev, struct device_node *node, struct of_regulator_match *matches, unsigned int num_matches); #else static inline struct regulator_init_data *of_get_regulator_init_data(struct device *dev, - struct device_node *node) + struct device_node *node, + const struct regulator_desc *desc) { return NULL; } |