diff options
-rw-r--r-- | MAINTAINERS | 4 | ||||
-rw-r--r-- | drivers/usb/host/ehci-pci.c | 5 | ||||
-rw-r--r-- | drivers/usb/musb/musb_debugfs.c | 5 | ||||
-rw-r--r-- | drivers/usb/otg/twl4030-usb.c | 78 | ||||
-rw-r--r-- | drivers/usb/serial/mos7720.c | 3 | ||||
-rw-r--r-- | drivers/usb/serial/mos7840.c | 3 |
6 files changed, 66 insertions, 32 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 411b0d04f69..50b8148448f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3942,7 +3942,7 @@ F: drivers/char/isicom.c F: include/linux/isicom.h MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER -M: Felipe Balbi <felipe.balbi@nokia.com> +M: Felipe Balbi <balbi@ti.com> L: linux-usb@vger.kernel.org T: git git://gitorious.org/usb/usb.git S: Maintained @@ -4240,7 +4240,7 @@ S: Maintained F: drivers/char/hw_random/omap-rng.c OMAP USB SUPPORT -M: Felipe Balbi <felipe.balbi@nokia.com> +M: Felipe Balbi <balbi@ti.com> M: David Brownell <dbrownell@users.sourceforge.net> L: linux-usb@vger.kernel.org L: linux-omap@vger.kernel.org diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 58b72d741d9..a1e8d273103 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -119,6 +119,11 @@ static int ehci_pci_setup(struct usb_hcd *hcd) ehci->broken_periodic = 1; ehci_info(ehci, "using broken periodic workaround\n"); } + if (pdev->device == 0x0806 || pdev->device == 0x0811 + || pdev->device == 0x0829) { + ehci_info(ehci, "disable lpm for langwell/penwell\n"); + ehci->has_lpm = 0; + } break; case PCI_VENDOR_ID_TDI: if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) { diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c index c79a5e30d43..9e8639d4e86 100644 --- a/drivers/usb/musb/musb_debugfs.c +++ b/drivers/usb/musb/musb_debugfs.c @@ -195,15 +195,14 @@ static const struct file_operations musb_regdump_fops = { static int musb_test_mode_open(struct inode *inode, struct file *file) { - file->private_data = inode->i_private; - return single_open(file, musb_test_mode_show, inode->i_private); } static ssize_t musb_test_mode_write(struct file *file, const char __user *ubuf, size_t count, loff_t *ppos) { - struct musb *musb = file->private_data; + struct seq_file *s = file->private_data; + struct musb *musb = s->private; u8 test = 0; char buf[18]; diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c index 05aaac1c386..0bc97698af1 100644 --- a/drivers/usb/otg/twl4030-usb.c +++ b/drivers/usb/otg/twl4030-usb.c @@ -347,11 +347,20 @@ static void twl4030_i2c_access(struct twl4030_usb *twl, int on) } } -static void twl4030_phy_power(struct twl4030_usb *twl, int on) +static void __twl4030_phy_power(struct twl4030_usb *twl, int on) { - u8 pwr; + u8 pwr = twl4030_usb_read(twl, PHY_PWR_CTRL); + + if (on) + pwr &= ~PHY_PWR_PHYPWD; + else + pwr |= PHY_PWR_PHYPWD; - pwr = twl4030_usb_read(twl, PHY_PWR_CTRL); + WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0); +} + +static void twl4030_phy_power(struct twl4030_usb *twl, int on) +{ if (on) { regulator_enable(twl->usb3v1); regulator_enable(twl->usb1v8); @@ -365,15 +374,13 @@ static void twl4030_phy_power(struct twl4030_usb *twl, int on) twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2); regulator_enable(twl->usb1v5); - pwr &= ~PHY_PWR_PHYPWD; - WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0); + __twl4030_phy_power(twl, 1); twl4030_usb_write(twl, PHY_CLK_CTRL, twl4030_usb_read(twl, PHY_CLK_CTRL) | (PHY_CLK_CTRL_CLOCKGATING_EN | PHY_CLK_CTRL_CLK32K_EN)); - } else { - pwr |= PHY_PWR_PHYPWD; - WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0); + } else { + __twl4030_phy_power(twl, 0); regulator_disable(twl->usb1v5); regulator_disable(twl->usb1v8); regulator_disable(twl->usb3v1); @@ -387,19 +394,25 @@ static void twl4030_phy_suspend(struct twl4030_usb *twl, int controller_off) twl4030_phy_power(twl, 0); twl->asleep = 1; + dev_dbg(twl->dev, "%s\n", __func__); } -static void twl4030_phy_resume(struct twl4030_usb *twl) +static void __twl4030_phy_resume(struct twl4030_usb *twl) { - if (!twl->asleep) - return; - twl4030_phy_power(twl, 1); twl4030_i2c_access(twl, 1); twl4030_usb_set_mode(twl, twl->usb_mode); if (twl->usb_mode == T2_USB_MODE_ULPI) twl4030_i2c_access(twl, 0); +} + +static void twl4030_phy_resume(struct twl4030_usb *twl) +{ + if (!twl->asleep) + return; + __twl4030_phy_resume(twl); twl->asleep = 0; + dev_dbg(twl->dev, "%s\n", __func__); } static int twl4030_usb_ldo_init(struct twl4030_usb *twl) @@ -408,8 +421,8 @@ static int twl4030_usb_ldo_init(struct twl4030_usb *twl) twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0xC0, PROTECT_KEY); twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0x0C, PROTECT_KEY); - /* put VUSB3V1 LDO in active state */ - twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2); + /* Keep VUSB3V1 LDO in sleep state until VBUS/ID change detected*/ + /*twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);*/ /* input to VUSB3V1 LDO is from VBAT, not VBUS */ twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1); @@ -502,6 +515,26 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl) return IRQ_HANDLED; } +static void twl4030_usb_phy_init(struct twl4030_usb *twl) +{ + int status; + + status = twl4030_usb_linkstat(twl); + if (status >= 0) { + if (status == USB_EVENT_NONE) { + __twl4030_phy_power(twl, 0); + twl->asleep = 1; + } else { + __twl4030_phy_resume(twl); + twl->asleep = 0; + } + + blocking_notifier_call_chain(&twl->otg.notifier, status, + twl->otg.gadget); + } + sysfs_notify(&twl->dev->kobj, NULL, "vbus"); +} + static int twl4030_set_suspend(struct otg_transceiver *x, int suspend) { struct twl4030_usb *twl = xceiv_to_twl(x); @@ -550,7 +583,6 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev) struct twl4030_usb_data *pdata = pdev->dev.platform_data; struct twl4030_usb *twl; int status, err; - u8 pwr; if (!pdata) { dev_dbg(&pdev->dev, "platform_data not available\n"); @@ -569,10 +601,7 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev) twl->otg.set_peripheral = twl4030_set_peripheral; twl->otg.set_suspend = twl4030_set_suspend; twl->usb_mode = pdata->usb_mode; - - pwr = twl4030_usb_read(twl, PHY_PWR_CTRL); - - twl->asleep = (pwr & PHY_PWR_PHYPWD); + twl->asleep = 1; /* init spinlock for workqueue */ spin_lock_init(&twl->lock); @@ -610,15 +639,10 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev) return status; } - /* The IRQ handler just handles changes from the previous states - * of the ID and VBUS pins ... in probe() we must initialize that - * previous state. The easy way: fake an IRQ. - * - * REVISIT: a real IRQ might have happened already, if PREEMPT is - * enabled. Else the IRQ may not yet be configured or enabled, - * because of scheduling delays. + /* Power down phy or make it work according to + * current link state. */ - twl4030_usb_irq(twl->irq, twl); + twl4030_usb_phy_init(twl); dev_info(&pdev->dev, "Initialized TWL4030 USB module\n"); return 0; diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 30922a7e334..aa665817a27 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -2024,6 +2024,9 @@ static int mos7720_ioctl(struct tty_struct *tty, struct file *file, case TIOCGICOUNT: cnow = mos7720_port->icount; + + memset(&icount, 0, sizeof(struct serial_icounter_struct)); + icount.cts = cnow.cts; icount.dsr = cnow.dsr; icount.rng = cnow.rng; diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 1c9b6e9b238..1a42bc21379 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -2285,6 +2285,9 @@ static int mos7840_ioctl(struct tty_struct *tty, struct file *file, case TIOCGICOUNT: cnow = mos7840_port->icount; smp_rmb(); + + memset(&icount, 0, sizeof(struct serial_icounter_struct)); + icount.cts = cnow.cts; icount.dsr = cnow.dsr; icount.rng = cnow.rng; |