diff options
| -rw-r--r-- | Documentation/RCU/checklist.txt | 26 | ||||
| -rw-r--r-- | Documentation/RCU/lockdep.txt | 5 | ||||
| -rw-r--r-- | Documentation/RCU/rcubarrier.txt | 15 | ||||
| -rw-r--r-- | Documentation/RCU/stallwarn.txt | 33 | ||||
| -rw-r--r-- | Documentation/RCU/whatisRCU.txt | 4 | ||||
| -rw-r--r-- | Documentation/kernel-parameters.txt | 35 | ||||
| -rw-r--r-- | include/linux/list_bl.h | 5 | ||||
| -rw-r--r-- | include/linux/rculist_bl.h | 2 | ||||
| -rw-r--r-- | include/linux/rcupdate.h | 1 | ||||
| -rw-r--r-- | include/trace/events/rcu.h | 55 | ||||
| -rw-r--r-- | init/Kconfig | 73 | ||||
| -rw-r--r-- | kernel/rcutree.c | 260 | ||||
| -rw-r--r-- | kernel/rcutree.h | 41 | ||||
| -rw-r--r-- | kernel/rcutree_plugin.h | 601 | ||||
| -rw-r--r-- | kernel/rcutree_trace.c | 2 |
15 files changed, 640 insertions, 518 deletions
diff --git a/Documentation/RCU/checklist.txt b/Documentation/RCU/checklist.txt index 31ef8fe07f8..79e789b8b8e 100644 --- a/Documentation/RCU/checklist.txt +++ b/Documentation/RCU/checklist.txt @@ -217,9 +217,14 @@ over a rather long period of time, but improvements are always welcome! whether the increased speed is worth it. 8. Although synchronize_rcu() is slower than is call_rcu(), it - usually results in simpler code. So, unless update performance - is critically important or the updaters cannot block, - synchronize_rcu() should be used in preference to call_rcu(). + usually results in simpler code. So, unless update performance is + critically important, the updaters cannot block, or the latency of + synchronize_rcu() is visible from userspace, synchronize_rcu() + should be used in preference to call_rcu(). Furthermore, + kfree_rcu() usually results in even simpler code than does + synchronize_rcu() without synchronize_rcu()'s multi-millisecond + latency. So please take advantage of kfree_rcu()'s "fire and + forget" memory-freeing capabilities where it applies. An especially important property of the synchronize_rcu() primitive is that it automatically self-limits: if grace periods @@ -268,7 +273,8 @@ over a rather long period of time, but improvements are always welcome! e. Periodically invoke synchronize_rcu(), permitting a limited number of updates per grace period. - The same cautions apply to call_rcu_bh() and call_rcu_sched(). + The same cautions apply to call_rcu_bh(), call_rcu_sched(), + call_srcu(), and kfree_rcu(). 9. All RCU list-traversal primitives, which include rcu_dereference(), list_for_each_entry_rcu(), and @@ -296,9 +302,9 @@ over a rather long period of time, but improvements are always welcome! all currently executing rcu_read_lock()-protected RCU read-side critical sections complete. It does -not- necessarily guarantee that all currently running interrupts, NMIs, preempt_disable() - code, or idle loops will complete. Therefore, if you do not have - rcu_read_lock()-protected read-side critical sections, do -not- - use synchronize_rcu(). + code, or idle loops will complete. Therefore, if your + read-side critical sections are protected by something other + than rcu_read_lock(), do -not- use synchronize_rcu(). Similarly, disabling preemption is not an acceptable substitute for rcu_read_lock(). Code that attempts to use preemption @@ -401,9 +407,9 @@ over a rather long period of time, but improvements are always welcome! read-side critical sections. It is the responsibility of the RCU update-side primitives to deal with this. -17. Use CONFIG_PROVE_RCU, CONFIG_DEBUG_OBJECTS_RCU_HEAD, and - the __rcu sparse checks to validate your RCU code. These - can help find problems as follows: +17. Use CONFIG_PROVE_RCU, CONFIG_DEBUG_OBJECTS_RCU_HEAD, and the + __rcu sparse checks (enabled by CONFIG_SPARSE_RCU_POINTER) to + validate your RCU code. These can help find problems as follows: CONFIG_PROVE_RCU: check that accesses to RCU-protected data structures are carried out under the proper RCU diff --git a/Documentation/RCU/lockdep.txt b/Documentation/RCU/lockdep.txt index a102d4b3724..cd83d2348fe 100644 --- a/Documentation/RCU/lockdep.txt +++ b/Documentation/RCU/lockdep.txt @@ -64,6 +64,11 @@ checking of rcu_dereference() primitives: but retain the compiler constraints that prevent duplicating or coalescsing. This is useful when when testing the value of the pointer itself, for example, against NULL. + rcu_access_index(idx): + Return the value of the index and omit all barriers, but + retain the compiler constraints that prevent duplicating + or coalescsing. This is useful when when testing the + value of the index itself, for example, against -1. The rcu_dereference_check() check expression can be any boolean expression, but would normally include a lockdep expression. However, diff --git a/Documentation/RCU/rcubarrier.txt b/Documentation/RCU/rcubarrier.txt index 38428c12513..2e319d1b9ef 100644 --- a/Documentation/RCU/rcubarrier.txt +++ b/Documentation/RCU/rcubarrier.txt @@ -79,7 +79,20 @@ complete. Pseudo-code using rcu_barrier() is as follows: 2. Execute rcu_barrier(). 3. Allow the module to be unloaded. -The rcutorture module makes use of rcu_barrier in its exit function +There are also rcu_barrier_bh(), rcu_barrier_sched(), and srcu_barrier() +functions for the other flavors of RCU, and you of course must match +the flavor of rcu_barrier() with that of call_rcu(). If your module +uses multiple flavors of call_rcu(), then it must also use multiple +flavors of rcu_barrier() when unloading that module. For example, if +it uses call_rcu_bh(), call_srcu() on srcu_struct_1, and call_srcu() on +srcu_struct_2(), then the following three lines of code will be required +when unloading: + + 1 rcu_barrier_bh(); + 2 srcu_barrier(&srcu_struct_1); + 3 srcu_barrier(&srcu_struct_2); + +The rcutorture module makes use of rcu_barrier() in its exit function as follows: 1 static void diff --git a/Documentation/RCU/stallwarn.txt b/Documentation/RCU/stallwarn.txt index 1927151b386..e38b8df3d72 100644 --- a/Documentation/RCU/stallwarn.txt +++ b/Documentation/RCU/stallwarn.txt @@ -92,14 +92,14 @@ If the CONFIG_RCU_CPU_STALL_INFO kernel configuration parameter is set, more information is printed with the stall-warning message, for example: INFO: rcu_preempt detected stall on CPU - 0: (63959 ticks this GP) idle=241/3fffffffffffffff/0 + 0: (63959 ticks this GP) idle=241/3fffffffffffffff/0 softirq=82/543 (t=65000 jiffies) In kernels with CONFIG_RCU_FAST_NO_HZ, even more information is printed: INFO: rcu_preempt detected stall on CPU - 0: (64628 ticks this GP) idle=dd5/3fffffffffffffff/0 drain=0 . timer not pending + 0: (64628 ticks this GP) idle=dd5/3fffffffffffffff/0 softirq=82/543 last_accelerate: a345/d342 nonlazy_posted: 25 .D (t=65000 jiffies) The "(64628 ticks this GP)" indicates that this CPU has taken more @@ -116,13 +116,28 @@ number between the two "/"s is the value of the nesting, which will be a small positive number if in the idle loop and a very large positive number (as shown above) otherwise. -For CONFIG_RCU_FAST_NO_HZ kernels, the "drain=0" indicates that the CPU is -not in the process of trying to force itself into dyntick-idle state, the -"." indicates that the CPU has not given up forcing RCU into dyntick-idle -mode (it would be "H" otherwise), and the "timer not pending" indicates -that the CPU has not recently forced RCU into dyntick-idle mode (it -would otherwise indicate the number of microseconds remaining in this -forced state). +The "softirq=" portion of the message tracks the number of RCU softirq +handlers that the stalled CPU has executed. The number before the "/" +is the number that had executed since boot at the time that this CPU +last noted the beginning of a grace period, which might be the current +(stalled) grace period, or it might be some earlier grace period (for +example, if the CPU might have been in dyntick-idle mode for an extended +time period. The number after the "/" is the number that have executed +since boot until the current time. If this latter number stays constant +across repeated stall-warning messages, it is possible that RCU's softirq +handlers are no longer able to execute on this CPU. This can happen if +the stalled CPU is spinning with interrupts are disabled, or, in -rt +kernels, if a high-priority process is starving RCU's softirq handler. + +For CONFIG_RCU_FAST_NO_HZ kernels, the "last_accelerate:" prints the +low-order 16 bits (in hex) of the jiffies counter when this CPU last +invoked rcu_try_advance_all_cbs() from rcu_needs_cpu() or last invoked +rcu_accelerate_cbs() from rcu_prepare_for_idle(). The "nonlazy_posted:" +prints the number of non-lazy callbacks posted since the last call to +rcu_needs_cpu(). Finally, an "L" indicates that there are currently +no non-lazy callbacks ("." is printed otherwise, as shown above) and +"D" indicates that dyntick-idle processing is enabled ("." is printed +otherwise, for example, if disabled via the "nohz=" kernel boot parameter). Multiple Warnings From One Stall diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt index 0cc7820967f..10df0b82f45 100644 --- a/Documentation/RCU/whatisRCU.txt +++ b/Documentation/RCU/whatisRCU.txt @@ -265,9 +265,9 @@ rcu_dereference() rcu_read_lock(); p = rcu_dereference(head.next); rcu_read_unlock(); - x = p->address; + x = p->address; /* BUG!!! */ rcu_read_lock(); - y = p->data; + y = p->data; /* BUG!!! */ rcu_read_unlock(); Holding a reference from one RCU read-side critical section diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 12bbce346d5..de12397b60a 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2499,9 +2499,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted. In kernels built with CONFIG_RCU_NOCB_CPU=y, set the specified list of CPUs to be no-callback CPUs. Invocation of these CPUs' RCU callbacks will - be offloaded to "rcuoN" kthreads created for - that purpose. This reduces OS jitter on the + be offloaded to "rcuox/N" kthreads created for + that purpose, where "x" is "b" for RCU-bh, "p" + for RCU-preempt, and "s" for RCU-sched, and "N" + is the CPU number. This reduces OS jitter on the offloaded CPUs, which can be useful for HPC and + real-time workloads. It can also improve energy efficiency for asymmetric multiprocessors. @@ -2525,6 +2528,17 @@ bytes respectively. Such letter suffixes can also be entirely omitted. leaf rcu_node structure. Useful for very large systems. + rcutree.jiffies_till_first_fqs= [KNL,BOOT] + Set delay from grace-period initialization to + first attempt to force quiescent states. + Units are jiffies, minimum value is zero, + and maximum value is HZ. + + rcutree.jiffies_till_next_fqs= [KNL,BOOT] + Set delay between subsequent attempts to force + quiescent states. Units are jiffies, minimum + value is one, and maximum value is HZ. + rcutree.qhimark= [KNL,BOOT] Set threshold of queued RCU callbacks over which batch limiting is disabled. @@ -2539,16 +2553,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted. rcutree.rcu_cpu_stall_timeout= [KNL,BOOT] Set timeout for RCU CPU stall warning messages. - rcutree.jiffies_till_first_fqs= [KNL,BOOT] - Set delay from grace-period initialization to - first attempt to force quiescent states. - Units are jiffies, minimum value is zero, - and maximum value is HZ. + rcutree.rcu_idle_gp_delay= [KNL,BOOT] + Set wakeup interval for idle CPUs that have + RCU callbacks (RCU_FAST_NO_HZ=y). - rcutree.jiffies_till_next_fqs= [KNL,BOOT] - Set delay between subsequent attempts to force - quiescent states. Units are jiffies, minimum - value is one, and maximum value is HZ. + rcutree.rcu_idle_lazy_gp_delay= [KNL,BOOT] + Set wakeup interval for idle CPUs that have + only "lazy" RCU callbacks (RCU_FAST_NO_HZ=y). + Lazy RCU callbacks are those which RCU can + prove do nothing more than free memory. rcutorture.fqs_duration= [KNL,BOOT] Set duration of force_quiescent_state bursts. diff --git a/include/linux/list_bl.h b/include/linux/list_bl.h index 31f9d75adc5..2eb88556c5c 100644 --- a/include/linux/list_bl.h +++ b/include/linux/list_bl.h @@ -125,6 +125,11 @@ static inline void hlist_bl_unlock(struct hlist_bl_head *b) __bit_spin_unlock(0, (unsigned long *)b); } +static inline bool hlist_bl_is_locked(struct hlist_bl_head *b) +{ + return bit_spin_is_locked(0, (unsigned long *)b); +} + /** * hlist_bl_for_each_entry - iterate over list of given type * @tpos: the type * to use as a loop cursor. diff --git a/include/linux/rculist_bl.h b/include/linux/rculist_bl.h index cf1244fbf3b..4f216c59e7d 100644 --- a/include/linux/rculist_bl.h +++ b/include/linux/rculist_bl.h @@ -20,7 +20,7 @@ static inline void hlist_bl_set_first_rcu(struct hlist_bl_head *h, static inline struct hlist_bl_node *hlist_bl_first_rcu(struct hlist_bl_head *h) { return (struct hlist_bl_node *) - ((unsigned long)rcu_dereference(h->first) & ~LIST_BL_LOCKMASK); + ((unsigned long)rcu_dereference_check(h->first, hlist_bl_is_locked(h)) & ~LIST_BL_LOCKMASK); } /** diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index b758ce17b30..9ed2c9a4de4 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -80,6 +80,7 @@ extern void do_trace_rcu_torture_read(char *rcutorturename, #define UINT_CMP_LT(a, b) (UINT_MAX / 2 < (a) - (b)) #define ULONG_CMP_GE(a, b) (ULONG_MAX / 2 >= (a) - (b)) #define ULONG_CMP_LT(a, b) (ULONG_MAX / 2 < (a) - (b)) +#define ulong2long(a) (*(long *)(&(a))) /* Exported common interfaces */ diff --git a/include/trace/events/rcu.h b/include/trace/events/rcu.h index 1918e832da4..59ebcc89f14 100644 --- a/include/trace/events/rcu.h +++ b/include/trace/events/rcu.h @@ -72,6 +72,58 @@ TRACE_EVENT(rcu_grace_period, ); /* + * Tracepoint for future grace-period events, including those for no-callbacks + * CPUs. The caller should pull the data from the rcu_node structure, + * other than rcuname, which comes from the rcu_state structure, and event, + * which is one of the following: + * + * "Startleaf": Request a nocb grace period based on leaf-node data. + * "Startedleaf": Leaf-node start proved sufficient. + * "Startedleafroot": Leaf-node start proved sufficient after checking root. + * "Startedroot": Requested a nocb grace period based on root-node data. + * "StartWait": Start waiting for the requested grace period. + * "ResumeWait": Resume waiting after signal. + * "EndWait": Complete wait. + * "Cleanup": Clean up rcu_node structure after previous GP. + * "CleanupMore": Clean up, and another no-CB GP is needed. + */ +TRACE_EVENT(rcu_future_grace_period, + + TP_PROTO(char *rcuname, unsigned long gpnum, unsigned long completed, + unsigned long c, u8 level, int grplo, int grphi, + char *gpevent), + + TP_ARGS(rcuname, gpnum, completed, c, level, grplo, grphi, gpevent), + + TP_STRUCT__entry( + __field(char *, rcuname) + __field(unsigned long, gpnum) + __field(unsigned long, completed) + __field(unsigned long, c) + __field(u8, level) + __field(int, grplo) + __field(int, grphi) + __field(char *, gpevent) + ), + + TP_fast_assign( + __entry->rcuname = rcuname; + __entry->gpnum = gpnum; + __entry->completed = completed; + __entry->c = c; + __entry->level = level; + __entry->grplo = grplo; + __entry->grphi = grphi; + __entry->gpevent = gpevent; + ), + + TP_printk("%s %lu %lu %lu %u %d %d %s", + __entry->rcuname, __entry->gpnum, __entry->completed, + __entry->c, __entry->level, __entry->grplo, __entry->grphi, + __entry->gpevent) +); + +/* * Tracepoint for grace-period-initialization events. These are * distinguished by the type of RCU, the new grace-period number, the * rcu_node structure level, the starting and ending CPU covered by the @@ -601,6 +653,9 @@ TRACE_EVENT(rcu_barrier, #define trace_rcu_grace_period(rcuname, gpnum, gpevent) do { } while (0) #define trace_rcu_grace_period_init(rcuname, gpnum, level, grplo, grphi, \ qsmask) do { } while (0) +#define trace_rcu_future_grace_period(rcuname, gpnum, completed, c, \ + level, grplo, grphi, event) \ + do { } while (0) #define trace_rcu_preempt_task(rcuname, pid, gpnum) do { } while (0) #define trace_rcu_unlock_preempted_task(rcuname, gpnum, pid) do { } while (0) #define trace_rcu_quiescent_state_report(rcuname, gpnum, mask, qsmask, level, \ diff --git a/init/Kconfig b/init/Kconfig index 5341d7232c3..71bb9e73011 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -578,13 +578,16 @@ config RCU_FAST_NO_HZ depends on NO_HZ && SMP default n help - This option causes RCU to attempt to accelerate grace periods in - order to allow CPUs to enter dynticks-idle state more quickly. - On the other hand, this option increases the overhead of the - dynticks-idle checking, thus degrading scheduling latency. + This option permits CPUs to enter dynticks-idle state even if + they have RCU callbacks queued, and prevents RCU from waking + these CPUs up more than roughly once every four jiffies (by + default, you can adjust this using the rcutree.rcu_idle_gp_delay + parameter), thus improving energy efficiency. On the other + hand, this option increases the duration of RCU grace periods, + for example, slowing down synchronize_rcu(). - Say Y if energy efficiency is critically important, and you don't - care about real-time response. + Say Y if energy efficiency is critically important, and you + don't care about increased grace-period durations. Say N if you are unsure. @@ -651,7 +654,7 @@ config RCU_BOOST_DELAY Accept the default if unsure. config RCU_NOCB_CPU - bool "Offload RCU callback processing from boot-selected CPUs" + bool "Offload RCU callback processing from boot-selected CPUs (EXPERIMENTAL" depends on TREE_RCU || TREE_PREEMPT_RCU default n help @@ -662,16 +665,56 @@ config RCU_NOCB_CPU This option offloads callback invocation from the set of CPUs specified at boot time by the rcu_nocbs parameter. - For each such CPU, a kthread ("rcuoN") will be created to - invoke callbacks, where the "N" is the CPU being offloaded. - Nothing prevents this kthread from running on the specified - CPUs, but (1) the kthreads may be preempted between each - callback, and (2) affinity or cgroups can be used to force - the kthreads to run on whatever set of CPUs is desired. - - Say Y here if you want reduced OS jitter on selected CPUs. + For each such CPU, a kthread ("rcuox/N") will be created to + invoke callbacks, where the "N" is the CPU being offloaded, + and where the "x" is "b" for RCU-bh, "p" for RCU-preempt, and + "s" for RCU-sched. Nothing prevents this kthread from running + on the specified CPUs, but (1) the kthreads may be preempted + between each callback, and (2) affinity or cgroups can be used + to force the kthreads to run on whatever set of CPUs is desired. + + Say Y here if you want to help to debug reduced OS jitter. Say N here if you are unsure. +choice + prompt "Build-forced no-CBs CPUs" + default RCU_NOCB_CPU_NONE + help + This option allows no-CBs CPUs to be specified at build time. + Additional no-CBs CPUs may be specified by the rcu_nocbs= + boot parameter. + +config RCU_NOCB_CPU_NONE + bool "No build_forced no-CBs CPUs" + depends on RCU_NOCB_CPU + help + This option does not force any of the CPUs to be no-CBs CPUs. + Only CPUs designated by the rcu_nocbs= boot parameter will be + no-CBs CPUs. + +config RCU_NOCB_CPU_ZERO + bool "CPU 0 is a build_forced no-CBs CPU" + depends on RCU_NOCB_CPU + help + This option forces CPU 0 to be a no-CBs CPU. Additional CPUs + may be designated as no-CBs CPUs using the rcu_nocbs= boot + parameter will be no-CBs CPUs. + + Select this if CPU 0 needs to be a no-CBs CPU for real-time + or energy-efficiency reasons. + +config RCU_NOCB_CPU_ALL + bool "All CPUs are build_forced no-CBs CPUs" + depends on RCU_NOCB_CPU + help + This option forces all CPUs to be no-CBs CPUs. The rcu_nocbs= + boot parameter will be ignored. + + Select this if all CPUs need to be no-CBs CPUs for real-time + or energy-efficiency reasons. + +endchoice + endmenu # "RCU Subsystem" config IKCONFIG diff --git a/kernel/rcutree.c b/kernel/rcutree.c index 2f8530bc4b1..d8534308fd0 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -64,7 +64,7 @@ static struct lock_class_key rcu_node_class[RCU_NUM_LVLS]; static struct lock_class_key rcu_fqs_class[RCU_NUM_LVLS]; -#define RCU_STATE_INITIALIZER(sname, cr) { \ +#define RCU_STATE_INITIALIZER(sname, sabbr, cr) { \ .level = { &sname##_state.node[0] }, \ .call = cr, \ .fqs_state = RCU_GP_IDLE, \ @@ -76,13 +76,14 @@ static struct lock_class_key rcu_fqs_class[RCU_NUM_LVLS]; .barrier_mutex = __MUTEX_INITIALIZER(sname##_state.barrier_mutex), \ .onoff_mutex = __MUTEX_INITIALIZER(sname##_state.onoff_mutex), \ .name = #sname, \ + .abbr = sabbr, \ } struct rcu_state rcu_sched_state = - RCU_STATE_INITIALIZER(rcu_sched, call_rcu_sched); + RCU_STATE_INITIALIZER(rcu_sched, 's', call_rcu_sched); DEFINE_PER_CPU(struct rcu_data, rcu_sched_data); -struct rcu_state rcu_bh_state = RCU_STATE_INITIALIZER(rcu_bh, call_rcu_bh); +struct rcu_state rcu_bh_state = RCU_STATE_INITIALIZER(rcu_bh, 'b', call_rcu_bh); DEFINE_PER_CPU(struct rcu_data, rcu_bh_data); static struct rcu_state *rcu_state; @@ -223,6 +224,8 @@ static ulong jiffies_till_next_fqs = RCU_JIFFIES_TILL_FORCE_QS; module_param(jiffies_till_first_fqs, ulong, 0644); module_param(jiffies_till_next_fqs, ulong, 0644); +static void rcu_start_gp_advanced(struct rcu_state *rsp, struct rcu_node *rnp, + struct rcu_data *rdp); static void force_qs_rnp(struct rcu_state *rsp, int (*f)(struct rcu_data *)); static void force_quiescent_state(struct rcu_state *rsp); static int rcu_pending(int cpu); @@ -310,6 +313,8 @@ cpu_needs_another_gp(struct rcu_state *rsp, struct rcu_data *rdp) if (rcu_gp_in_progress(rsp)) return 0; /* No, a grace period is already in progress. */ + if (rcu_nocb_needs_gp(rsp)) + return 1; /* Yes, a no-CBs CPU needs one. */ if (!rdp->nxttail[RCU_NEXT_TAIL]) return 0; /* No, this is a no-CBs (or offline) CPU. */ if (*rdp->nxttail[RCU_NEXT_READY_TAIL]) @@ -1035,10 +1040,11 @@ static void init_callback_list(struct rcu_data *rdp) { int i; + if (init_nocb_callback_list(rdp)) + return; rdp->nxtlist = NULL; for (i = 0; i < RCU_NEXT_SIZE; i++) rdp->nxttail[i] = &rdp->nxtlist; - init_nocb_callback_list(rdp); } /* @@ -1071,6 +1077,120 @@ static unsigned long rcu_cbs_completed(struct rcu_state *rsp, } /* + * Trace-event helper function for rcu_start_future_gp() and + * rcu_nocb_wait_gp(). + */ +static void trace_rcu_future_gp(struct rcu_node *rnp, struct rcu_data *rdp, + unsigned long c, char *s) +{ + trace_rcu_future_grace_period(rdp->rsp->name, rnp->gpnum, + rnp->completed, c, rnp->level, + rnp->grplo, rnp->grphi, s); +} + +/* + * Start some future grace period, as needed to handle newly arrived + * callbacks. The required future grace periods are recorded in each + * rcu_node structure's ->need_future_gp field. + * + * The caller must hold the specified rcu_node structure's ->lock. + */ +static unsigned long __maybe_unused +rcu_start_future_gp(struct rcu_node *rnp, struct rcu_data *rdp) +{ + unsigned long c; + int i; + struct rcu_node *rnp_root = rcu_get_root(rdp->rsp); + + /* + * Pick up grace-period number for new callbacks. If this + * grace period is already marked as needed, return to the caller. + */ + c = rcu_cbs_completed(rdp->rsp, rnp); + trace_rcu_future_gp(rnp, rdp, c, "Startleaf"); + if (rnp->need_future_gp[c & 0x1]) { + trace_rcu_future_gp(rnp, rdp, c, "Prestartleaf"); + return c; + } + + /* + * If either this rcu_node structure or the root rcu_node structure + * believe that a grace period is in progress, then we must wait + * for the one following, which is in "c". Because our request + * will be noticed at the end of the current grace period, we don't + * need to explicitly start one. + */ + if (rnp->gpnum != rnp->completed || + ACCESS_ONCE(rnp->gpnum) != ACCESS_ONCE(rnp->completed)) { + rnp->need_future_gp[c & 0x1]++; + trace_rcu_future_gp(rnp, rdp, c, "Startedleaf"); + return c; + } + + /* + * There might be no grace period in progress. If we don't already + * hold it, acquire the root rcu_node structure's lock in order to + * start one (if needed). + */ + if (rnp != rnp_root) + raw_spin_lock(&rnp_root->lock); + + /* + * Get a new grace-period number. If there really is no grace + * period in progress, it will be smaller than the one we obtained + * earlier. Adjust callbacks as needed. Note that even no-CBs + * CPUs have a ->nxtcompleted[] array, so no no-CBs checks needed. + */ + c = rcu_cbs_completed(rdp->rsp, rnp_root); + for (i = RCU_DONE_TAIL; i < RCU_NEXT_TAIL; i++) + if (ULONG_CMP_LT(c, rdp->nxtcompleted[i])) + rdp->nxtcompleted[i] = c; + + /* + * If the needed for the required grace period is already + * recorded, trace and leave. + */ + if (rnp_root->need_future_gp[c & 0x1]) { + trace_rcu_future_gp(rnp, rdp, c, "Prestartedroot"); + goto unlock_out; + } + + /* Record the need for the future grace period. */ + rnp_root->need_future_gp[c & 0x1]++; + + /* If a grace period is not already in progress, start one. */ + if (rnp_root->gpnum != rnp_root->completed) { + trace_rcu_future_gp(rnp, rdp, c, "Startedleafroot"); + } else { + trace_rcu_future_gp(rnp, rdp, c, "Startedroot"); + rcu_start_gp_advanced(rdp->rsp, rnp_root, rdp); + } +unlock_out: + if (rnp != rnp_root) + raw_spin_unlock(&rnp_root->lock); + return c; +} + +/* + * Clean up any old requests for the just-ended grace period. Also return + * whether any additional grace periods have been requested. Also invoke + * rcu_nocb_gp_cleanup() in order to wake up any no-callbacks kthreads + * waiting for this grace period to complete. + */ +static int rcu_future_gp_cleanup(struct rcu_state *rsp, struct rcu_node *rnp) +{ + int c = rnp->completed; + int needmore; + struct rcu_data *rdp = this_cpu_ptr(rsp->rda); + + rcu_nocb_gp_cleanup(rsp, rnp); + rnp->need_future_gp[c & 0x1] = 0; + needmore = rnp->need_future_gp[(c + 1) & 0x1]; + trace_rcu_future_gp(rnp, rdp, c, needmore ? "CleanupMore" : "Cleanup"); + return needmore; +} + +/* * If there is room, assign a ->completed number to any callbacks on * this CPU that have not already been assigned. Also accelerate any * callbacks that were previously assigned a ->completed number that has @@ -1129,6 +1249,8 @@ static void rcu_accelerate_cbs(struct rcu_state *rsp, struct rcu_node *rnp, rdp->nxttail[i] = rdp->nxttail[RCU_NEXT_TAIL]; rdp->nxtcompleted[i] = c; } + /* Record any needed additional grace periods. */ + rcu_start_future_gp(rnp, rdp); /* Trace depending on how much we were able to accelerate. */ if (!*rdp->nxttail[RCU_WAIT_TAIL]) @@ -1308,9 +1430,9 @@ static int rcu_gp_init(struct rcu_state *rsp) rdp = this_cpu_ptr(rsp->rda); rcu_preempt_check_blocked_tasks(rnp); rnp->qsmask = rnp->qsmaskinit; - rnp->gpnum = rsp->gpnum; + ACCESS_ONCE(rnp->gpnum) = rsp->gpnum; WARN_ON_ONCE(rnp->completed != rsp->completed); - rnp->completed = rsp->completed; + ACCESS_ONCE(rnp->completed) = rsp->completed; if (rnp == rdp->mynode) rcu_start_gp_per_cpu(rsp, rnp, rdp); rcu_preempt_boost_start_gp(rnp); @@ -1319,7 +1441,8 @@ static int rcu_gp_init(struct rcu_state *rsp) rnp->grphi, rnp->qsmask); raw_spin_unlock_irq(&rnp->lock); #ifdef CONFIG_PROVE_RCU_DELAY - if ((prandom_u32() % (rcu_num_nodes * 8)) == 0) + if ((prandom_u32() % (rcu_num_nodes * 8)) == 0 && + system_state == SYSTEM_RUNNING) schedule_timeout_uninterruptible(2); #endif /* #ifdef CONFIG_PROVE_RCU_DELAY */ cond_resched(); @@ -1361,6 +1484,7 @@ int rcu_gp_fqs(struct rcu_state *rsp, int fqs_state_in) static void rcu_gp_cleanup(struct rcu_state *rsp) { unsigned long gp_duration; + int nocb = 0; struct rcu_data *rdp; struct rcu_node *rnp = rcu_get_root(rsp); @@ -1390,17 +1514,23 @@ static void rcu_gp_cleanup(struct rcu_state *rsp) */ rcu_for_each_node_breadth_first(rsp, rnp) { raw_spin_lock_irq(&rnp->lock); - rnp->completed = rsp->gpnum; + ACCESS_ONCE(rnp->completed) = rsp->gpnum; + rdp = this_cpu_ptr(rsp->rda); + if (rnp == rdp->mynode) + __rcu_process_gp_end(rsp, rnp, rdp); + nocb += rcu_future_gp_cleanup(rsp, rnp); raw_spin_unlock_irq(&rnp->lock); cond_resched(); } rnp = rcu_get_root(rsp); raw_spin_lock_irq(&rnp->lock); + rcu_nocb_gp_set(rnp, nocb); rsp->completed = rsp->gpnum; /* Declare grace period done. */ trace_rcu_grace_period(rsp->name, rsp->completed, "end"); rsp->fqs_state = RCU_GP_IDLE; rdp = this_cpu_ptr(rsp->rda); + rcu_advance_cbs(rsp, rnp, rdp); /* Reduce false positives below. */ if (cpu_needs_another_gp(rsp, rdp)) rsp->gp_flags = 1; raw_spin_unlock_irq(&rnp->lock); @@ -1476,57 +1606,62 @@ static int __noreturn rcu_gp_kthread(void *arg) /* * Start a new RCU grace period if warranted, re-initializing the hierarchy * in preparation for detecting the next grace period. The caller must hold - * the root node's ->lock, which is released before return. Hard irqs must - * be disabled. + * the root node's ->lock and hard irqs must be disabled. * * Note that it is legal for a dying CPU (which is marked as offline) to * invoke this function. This can happen when the dying CPU reports its * quiescent state. */ static void -rcu_start_gp(struct rcu_state *rsp, unsigned long flags) - __releases(rcu_get_root(rsp)->lock) +rcu_start_gp_advanced(struct rcu_state *rsp, struct rcu_node *rnp, + struct rcu_data *rdp) { - struct rcu_data *rdp = this_cpu_ptr(rsp->rda); - struct rcu_node *rnp = rcu_get_root(rsp); - - if (!rsp->gp_kthread || - !cpu_needs_another_gp(rsp, rdp)) { + if (!rsp->gp_kthread || !cpu_needs_another_gp(rsp, rdp)) { /* * Either we have not yet spawned the grace-period * task, this CPU does not need another grace period, * or a grace period is already in progress. * Either way, don't start a new grace period. */ - raw_spin_unlock_irqrestore(&rnp->lock, flags); return; } - - /* - * Because there is no grace period in progress right now, - * any callbacks we have up to this point will be satisfied - * by the next grace period. So this is a good place to - * assign a grace period number to recently posted callbacks. - */ - rcu_accelerate_cbs(rsp, rnp, rdp); - rsp->gp_flags = RCU_GP_FLAG_INIT; - raw_spin_unlock(&rnp->lock); /* Interrupts remain disabled. */ - - /* Ensure that CPU is aware of completion of last grace period. */ - rcu_process_gp_end(rsp, rdp); - local_irq_restore(flags); /* Wake up rcu_gp_kthread() to start the grace period. */ wake_up(&rsp->gp_wq); } /* + * Similar to rcu_start_gp_advanced(), but also advance the calling CPU's + * callbacks. Note that rcu_start_gp_advanced() cannot do this because it + * is invoked indirectly from rcu_advance_cbs(), which would result in + * endless recursion -- or would do so if it wasn't for the self-deadlock + * that is encountered beforehand. + */ +static void +rcu_start_gp(struct rcu_state *rsp) +{ + struct rcu_data *rdp = this_cpu_ptr(rsp->rda); + struct rcu_node *rnp = rcu_get_root(rsp); + + /* + * If there is no grace period in progress right now, any + * callbacks we have up to this point will be satisfied by the + * next grace period. Also, advancing the callbacks reduces the + * probability of false positives from cpu_needs_another_gp() + * resulting in pointless grace periods. So, advance callbacks + * then start the grace period! + */ + rcu_advance_cbs(rsp, rnp, rdp); + rcu_start_gp_advanced(rsp, rnp, rdp); +} + +/* * Report a full set of quiescent states to the specified rcu_state * data structure. This involves cleaning up after the prior grace * period and letting rcu_start_gp() start up the next grace period - * if one is needed. Note that the caller must hold rnp->lock, as - * required by rcu_start_gp(), which will release it. + * if one is needed. Note that the caller must hold rnp->lock, which + * is released before return. */ static void rcu_report_qs_rsp(struct rcu_state *rsp, unsigned long flags) __releases(rcu_get_root(rsp)->lock) @@ -2124,7 +2259,8 @@ __rcu_process_callbacks(struct rcu_state *rsp) local_irq_save(flags); if (cpu_needs_another_gp(rsp, rdp)) { raw_spin_lock(&rcu_get_root(rsp)->lock); /* irqs disabled. */ - rcu_start_gp(rsp, flags); /* releases above lock */ + rcu_start_gp(rsp); + raw_spin_unlock_irqrestore(&rcu_get_root(rsp)->lock, flags); } else { local_irq_restore(flags); } @@ -2169,7 +2305,8 @@ static void invoke_rcu_callbacks(struct rcu_state *rsp, struct rcu_data *rdp) static void invoke_rcu_core(void) { - raise_softirq(RCU_SOFTIRQ); + if (cpu_online(smp_processor_id())) + raise_softirq(RCU_SOFTIRQ); } /* @@ -2204,11 +2341,11 @@ static void __call_rcu_core(struct rcu_state *rsp, struct rcu_data *rdp, /* Start a new grace period if one not already started. */ if (!rcu_gp_in_progress(rsp)) { - unsigned long nestflag; struct rcu_node *rnp_root = rcu_get_root(rsp); - raw_spin_lock_irqsave(&rnp_root->lock, nestflag); - rcu_start_gp(rsp, nestflag); /* rlses rnp_root->lock */ + raw_spin_lock(&rnp_root->lock); + rcu_start_gp(rsp); + raw_spin_unlock(&rnp_root->lock); } else { /* Give the grace period a kick. */ rdp->blimit = LONG_MAX; @@ -2628,19 +2765,27 @@ static int rcu_pending(int cpu) } /* - * Check to see if any future RCU-related work will need to be done - * by the current CPU, even if none need be done immediately, returning - * 1 if so. + * Return true if the specified CPU has any callback. If all_lazy is + * non-NULL, store an indication of whether all callbacks are lazy. + * (If there are no callbacks, all of them are deemed to be lazy.) */ -static int rcu_cpu_has_callbacks(int cpu) +static int rcu_cpu_has_callbacks(int cpu, bool *all_lazy) { + bool al = true; + bool hc = false; + struct rcu_data *rdp; struct rcu_state *rsp; - /* RCU callbacks either ready or pending? */ - for_each_rcu_flavor(rsp) - if (per_cpu_ptr(rsp->rda, cpu)->nxtlist) - return 1; - return 0; + for_each_rcu_flavor(rsp) { + rdp = per_cpu_ptr(rsp->rda, cpu); + if (rdp->qlen != rdp->qlen_lazy) + al = false; + if (rdp->nxtlist) + hc = true; + } + if (all_lazy) + *all_lazy = al; + return hc; } /* @@ -2859,7 +3004,6 @@ rcu_init_percpu_data(int cpu, struct rcu_state *rsp, int preemptible) rdp->dynticks->dynticks_nesting = DYNTICK_TASK_EXIT_IDLE; atomic_set(&rdp->dynticks->dynticks, (atomic_read(&rdp->dynticks->dynticks) & ~0x1) + 1); - rcu_prepare_for_idle_init(cpu); raw_spin_unlock(&rnp->lock); /* irqs remain disabled. */ /* Add CPU to rcu_node bitmasks. */ @@ -2909,7 +3053,6 @@ static int __cpuinit rcu_cpu_notify(struct notifier_block *self, struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, cpu); struct rcu_node *rnp = rdp->mynode; struct rcu_state *rsp; - int ret = NOTIFY_OK; trace_rcu_utilization("Start CPU hotplug"); switch (action) { @@ -2923,21 +3066,12 @@ static int __cpuinit rcu_cpu_notify(struct notifier_block *self, rcu_boost_kthread_setaffinity(rnp, -1); break; case CPU_DOWN_PREPARE: - if (nocb_cpu_expendable(cpu)) - rcu_boost_kthread_setaffinity(rnp, cpu); - else - ret = NOTIFY_BAD; + rcu_boost_kthread_setaffinity(rnp, cpu); break; case CPU_DYING: case CPU_DYING_FROZEN: - /* - * The whole machine is "stopped" except this CPU, so we can - * touch any data without introducing corruption. We send the - * dying CPU's callbacks to an arbitrarily chosen online CPU. - */ for_each_rcu_flavor(rsp) rcu_cleanup_dying_cpu(rsp); - rcu_cleanup_after_idle(cpu); break; case CPU_DEAD: case CPU_DEAD_FROZEN: @@ -2950,7 +3084,7 @@ static int __cpuinit rcu_cpu_notify(struct notifier_block *self, break; } trace_rcu_utilization("End CPU hotplug"); - return ret; + return NOTIFY_OK; } /* @@ -3085,6 +3219,7 @@ static void __init rcu_init_one(struct rcu_state *rsp, } rnp->level = i; INIT_LIST_HEAD(&rnp->blkd_tasks); + rcu_init_one_nocb(rnp); } } @@ -3170,8 +3305,7 @@ void __init rcu_init(void) rcu_init_one(&rcu_sched_state, &rcu_sched_data); rcu_init_one(&rcu_bh_state, &rcu_bh_data); __rcu_init_preempt(); - rcu_init_nocb(); - open_softirq(RCU_SOFTIRQ, rcu_process_callbacks); + open_softirq(RCU_SOFTIRQ, rcu_process_callbacks); /* * We don't need protection against CPU-hotplug here because diff --git a/kernel/rcutree.h b/kernel/rcutree.h index c896b5045d9..14ee40795d6 100644 --- a/kernel/rcutree.h +++ b/kernel/rcutree.h @@ -88,18 +88,13 @@ struct rcu_dynticks { int dynticks_nmi_nesting; /* Track NMI nesting level. */ atomic_t dynticks; /* Even value for idle, else odd. */ #ifdef CONFIG_RCU_FAST_NO_HZ - int dyntick_drain; /* Prepare-for-idle state variable. */ - unsigned long dyntick_holdoff; - /* No retries for the jiffy of failure. */ - struct timer_list idle_gp_timer; - /* Wake up CPU sleeping with callbacks. */ - unsigned long idle_gp_timer_expires; - /* When to wake up CPU (for repost). */ - bool idle_first_pass; /* First pass of attempt to go idle? */ + bool all_lazy; /* Are all CPU's CBs lazy? */ unsigned long nonlazy_posted; /* # times non-lazy CBs posted to CPU. */ unsigned long nonlazy_posted_snap; /* idle-period nonlazy_posted snapshot. */ + unsigned long last_accelerate; + /* Last jiffy CBs were accelerated. */ int tick_nohz_enabled_snap; /* Previously seen value from sysfs. */ #endif /* #ifdef CONFIG_RCU_FAST_NO_HZ */ }; @@ -134,9 +129,6 @@ struct rcu_node { /* elements that need to drain to allow the */ /* current expedited grace period to */ /* complete (only for TREE_PREEMPT_RCU). */ - atomic_t wakemask; /* CPUs whose kthread needs to be awakened. */ - /* Since this has meaning only for leaf */ - /* rcu_node structures, 32 bits suffices. */ unsigned long qsmaskinit; /* Per-GP initial value for qsmask & expmask. */ unsigned long grpmask; /* Mask to apply to parent qsmask. */ @@ -196,6 +188,12 @@ struct rcu_node { /* Refused to boost: not sure why, though. */ /* This can happen due to race conditions. */ #endif /* #ifdef CONFIG_RCU_BOOST */ +#ifdef CONFIG_RCU_NOCB_CPU + wait_queue_head_t nocb_gp_wq[2]; + /* Place for rcu_nocb_kthread() to wait GP. */ +#endif /* #ifdef CONFIG_RCU_NOCB_CPU */ + int need_future_gp[2]; + /* Counts of upcoming no-CB GP requests. */ raw_spinlock_t fqslock ____cacheline_internodealigned_in_smp; } ____cacheline_internodealigned_in_smp; @@ -328,6 +326,11 @@ struct rcu_data { struct task_struct *nocb_kthread; #endif /* #ifdef CONFIG_RCU_NOCB_CPU */ + /* 8) RCU CPU stall data. */ +#ifdef CONFIG_RCU_CPU_STALL_INFO + unsigned int softirq_snap; /* Snapshot of softirq activity. */ +#endif /* #ifdef CONFIG_RCU_CPU_STALL_INFO */ + int cpu; struct rcu_state *rsp; }; @@ -375,12 +378,6 @@ struct rcu_state { struct rcu_data __percpu *rda; /* pointer of percu rcu_data. */ void (*call)(struct rcu_head *head, /* call_rcu() flavor. */ void (*func)(struct rcu_head *head)); -#ifdef CONFIG_RCU_NOCB_CPU - void (*call_remote)(struct rcu_head *head, - void (*func)(struct rcu_head *head)); - /* call_rcu() flavor, but for */ - /* placing on remote CPU. */ -#endif /* #ifdef CONFIG_RCU_NOCB_CPU */ /* The following fields are guarded by the root rcu_node's lock. */ @@ -443,6 +440,7 @@ struct rcu_state { unsigned long gp_max; /* Maximum GP duration in */ /* jiffies. */ char *name; /* Name of structure. */ + char abbr; /* Abbreviated name. */ struct list_head flavors; /* List of RCU flavors. */ }; @@ -520,7 +518,6 @@ static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp, struct rcu_node *rnp); #endif /* #ifdef CONFIG_RCU_BOOST */ static void __cpuinit rcu_prepare_kthreads(int cpu); -static void rcu_prepare_for_idle_init(int cpu); static void rcu_cleanup_after_idle(int cpu); static void rcu_prepare_for_idle(int cpu); static void rcu_idle_count_callbacks_posted(void); @@ -529,16 +526,18 @@ static void print_cpu_stall_info(struct rcu_state *rsp, int cpu); static void print_cpu_stall_info_end(void); static void zero_cpu_stall_ticks(struct rcu_data *rdp); static void increment_cpu_stall_ticks(void); +static int rcu_nocb_needs_gp(struct rcu_state *rsp); +static void rcu_nocb_gp_set(struct rcu_node *rnp, int nrq); +static void rcu_nocb_gp_cleanup(struct rcu_state *rsp, struct rcu_node *rnp); +static void rcu_init_one_nocb(struct rcu_node *rnp); static bool is_nocb_cpu(int cpu); static bool __call_rcu_nocb(struct rcu_data *rdp, struct rcu_head *rhp, bool lazy); static bool rcu_nocb_adopt_orphan_cbs(struct rcu_state *rsp, struct rcu_data *rdp); -static bool nocb_cpu_expendable(int cpu); static void rcu_boot_init_nocb_percpu_data(struct rcu_data *rdp); static void rcu_spawn_nocb_kthreads(struct rcu_state *rsp); -static void init_nocb_callback_list(struct rcu_data *rdp); -static void __init rcu_init_nocb(void); +static bool init_nocb_callback_list(struct rcu_data *rdp); #endif /* #ifndef RCU_TREE_NONCORE */ diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h index c1cc7e17ff9..d084ae3f281 100644 --- a/kernel/rcutree_plugin.h +++ b/kernel/rcutree_plugin.h @@ -85,11 +85,21 @@ static void __init rcu_bootup_announce_oddness(void) if (nr_cpu_ids != NR_CPUS) printk(KERN_INFO "\tRCU restricting CPUs from NR_CPUS=%d to nr_cpu_ids=%d.\n", NR_CPUS, nr_cpu_ids); #ifdef CONFIG_RCU_NOCB_CPU +#ifndef CONFIG_RCU_NOCB_CPU_NONE + if (!have_rcu_nocb_mask) { + alloc_bootmem_cpumask_var(&rcu_nocb_mask); + have_rcu_nocb_mask = true; + } +#ifdef CONFIG_RCU_NOCB_CPU_ZERO + pr_info("\tExperimental no-CBs CPU 0\n"); + cpumask_set_cpu(0, rcu_nocb_mask); +#endif /* #ifdef CONFIG_RCU_NOCB_CPU_ZERO */ +#ifdef CONFIG_RCU_NOCB_CPU_ALL + pr_info("\tExperimental no-CBs for all CPUs\n"); + cpumask_setall(rcu_nocb_mask); +#endif /* #ifdef CONFIG_RCU_NOCB_CPU_ALL */ +#endif /* #ifndef CONFIG_RCU_NOCB_CPU_NONE */ if (have_rcu_nocb_mask) { - if (cpumask_test_cpu(0, rcu_nocb_mask)) { - cpumask_clear_cpu(0, rcu_nocb_mask); - pr_info("\tCPU 0: illegal no-CBs CPU (cleared).\n"); - } cpulist_scnprintf(nocb_buf, sizeof(nocb_buf), rcu_nocb_mask); pr_info("\tExperimental no-CBs CPUs: %s.\n", nocb_buf); if (rcu_nocb_poll) @@ -101,7 +111,7 @@ static void __init rcu_bootup_announce_oddness(void) #ifdef CONFIG_TREE_PREEMPT_RCU struct rcu_state rcu_preempt_state = - RCU_STATE_INITIALIZER(rcu_preempt, call_rcu); + RCU_STATE_INITIALIZER(rcu_preempt, 'p', call_rcu); DEFINE_PER_CPU(struct rcu_data, rcu_preempt_data); static struct rcu_state *rcu_state = &rcu_preempt_state; @@ -1533,14 +1543,7 @@ static void __cpuinit rcu_prepare_kthreads(int cpu) int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies) { *delta_jiffies = ULONG_MAX; - return rcu_cpu_has_callbacks(cpu); -} - -/* - * Because we do not have RCU_FAST_NO_HZ, don't bother initializing for it. - */ -static void rcu_prepare_for_idle_init(int cpu) -{ + return rcu_cpu_has_callbacks(cpu, NULL); } /* @@ -1577,16 +1580,6 @@ static void rcu_idle_count_callbacks_posted(void) * * The following three proprocessor symbols control this state machine: * - * RCU_IDLE_FLUSHES gives the maximum number of times that we will attempt - * to satisfy RCU. Beyond this point, it is better to incur a periodic - * scheduling-clock interrupt than to loop through the state machine - * at full power. - * RCU_IDLE_OPT_FLUSHES gives the number of RCU_IDLE_FLUSHES that are - * optional if RCU does not need anything immediately from this - * CPU, even if this CPU still has RCU callbacks queued. The first - * times through the state machine are mandatory: we need to give - * the state machine a chance to communicate a quiescent state - * to the RCU core. * RCU_IDLE_GP_DELAY gives the number of jiffies that a CPU is permitted * to sleep in dyntick-idle mode with RCU callbacks pending. This * is sized to be roughly one RCU grace period. Those energy-efficiency @@ -1602,186 +1595,108 @@ static void rcu_idle_count_callbacks_posted(void) * adjustment, they can be converted into kernel config parameters, though * making the state machine smarter might be a better option. */ -#define RCU_IDLE_FLUSHES 5 /* Number of dyntick-idle tries. */ -#define RCU_IDLE_OPT_FLUSHES 3 /* Optional dyntick-idle tries. */ #define RCU_IDLE_GP_DELAY 4 /* Roughly one grace period. */ #define RCU_IDLE_LAZY_GP_DELAY (6 * HZ) /* Roughly six seconds. */ -extern int tick_nohz_enabled; - -/* - * Does the specified flavor of RCU have non-lazy callbacks pending on - * the specified CPU? Both RCU flavor and CPU are specified by the - * rcu_data structure. - */ -static bool __rcu_cpu_has_nonlazy_callbacks(struct rcu_data *rdp) -{ - return rdp->qlen != rdp->qlen_lazy; -} +static int rcu_idle_gp_delay = RCU_IDLE_GP_DELAY; +module_param(rcu_idle_gp_delay, int, 0644); +static int rcu_idle_lazy_gp_delay = RCU_IDLE_LAZY_GP_DELAY; +module_param(rcu_idle_lazy_gp_delay, int, 0644); -#ifdef CONFIG_TREE_PREEMPT_RCU +extern int tick_nohz_enabled; /* - * Are there non-lazy RCU-preempt callbacks? (There cannot be if there - * is no RCU-preempt in the kernel.) + * Try to advance callbacks for all flavors of RCU on the current CPU. + * Afterwards, if there are any callbacks ready for immediate invocation, + * return true. */ -static bool rcu_preempt_cpu_has_nonlazy_callbacks(int cpu) +static bool rcu_try_advance_all_cbs(void) { - struct rcu_data *rdp = &per_cpu(rcu_preempt_data, cpu); - - return __rcu_cpu_has_nonlazy_callbacks(rdp); -} - -#else /* #ifdef CONFIG_TREE_PREEMPT_RCU */ + bool cbs_ready = false; + struct rcu_data *rdp; + struct rcu_node *rnp; + struct rcu_state *rsp; -static bool rcu_preempt_cpu_has_nonlazy_callbacks(int cpu) -{ - return 0; -} + for_each_rcu_flavor(rsp) { + rdp = this_cpu_ptr(rsp->rda); + rnp = rdp->mynode; -#endif /* else #ifdef CONFIG_TREE_PREEMPT_RCU */ + /* + * Don't bother checking unless a grace period has + * completed since we last checked and there are + * callbacks not yet ready to invoke. + */ + if (rdp->completed != rnp->completed && + rdp->nxttail[RCU_DONE_TAIL] != rdp->nxttail[RCU_NEXT_TAIL]) + rcu_process_gp_end(rsp, rdp); -/* - * Does any flavor of RCU have non-lazy callbacks on the specified CPU? - */ -static bool rcu_cpu_has_nonlazy_callbacks(int cpu) -{ - return __rcu_cpu_has_nonlazy_callbacks(&per_cpu(rcu_sched_data, cpu)) || - __rcu_cpu_has_nonlazy_callbacks(&per_cpu(rcu_bh_data, cpu)) || - rcu_preempt_cpu_has_nonlazy_callbacks(cpu); + if (cpu_has_callbacks_ready_to_invoke(rdp)) + cbs_ready = true; + } + return cbs_ready; } /* - * Allow the CPU to enter dyntick-idle mode if either: (1) There are no - * callbacks on this CPU, (2) this CPU has not yet attempted to enter - * dyntick-idle mode, or (3) this CPU is in the process of attempting to - * enter dyntick-idle mode. Otherwise, if we have recently tried and failed - * to enter dyntick-idle mode, we refuse to try to enter it. After all, - * it is better to incur scheduling-clock interrupts than to spin - * continuously for the same time duration! + * Allow the CPU to enter dyntick-idle mode unless it has callbacks ready + * to invoke. If the CPU has callbacks, try to advance them. Tell the + * caller to set the timeout based on whether or not there are non-lazy + * callbacks. * - * The delta_jiffies argument is used to store the time when RCU is - * going to need the CPU again if it still has callbacks. The reason - * for this is that rcu_prepare_for_idle() might need to post a timer, - * but if so, it will do so after tick_nohz_stop_sched_tick() has set - * the wakeup time for this CPU. This means that RCU's timer can be - * delayed until the wakeup time, which defeats the purpose of posting - * a timer. + * The caller must have disabled interrupts. */ -int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies) +int rcu_needs_cpu(int cpu, unsigned long *dj) { struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu); - /* Flag a new idle sojourn to the idle-entry state machine. */ - rdtp->idle_first_pass = 1; + /* Snapshot to detect later posting of non-lazy callback. */ + rdtp->nonlazy_posted_snap = rdtp->nonlazy_posted; + /* If no callbacks, RCU doesn't need the CPU. */ - if (!rcu_cpu_has_callbacks(cpu)) { - *delta_jiffies = ULONG_MAX; + if (!rcu_cpu_has_callbacks(cpu, &rdtp->all_lazy)) { + *dj = ULONG_MAX; return 0; } - if (rdtp->dyntick_holdoff == jiffies) { - /* RCU recently tried and failed, so don't try again. */ - *delta_jiffies = 1; + + /* Attempt to advance callbacks. */ + if (rcu_try_advance_all_cbs()) { + /* Some ready to invoke, so initiate later invocation. */ + invoke_rcu_core(); return 1; } - /* Set up for the possibility that RCU will post a timer. */ - if (rcu_cpu_has_nonlazy_callbacks(cpu)) { - *delta_jiffies = round_up(RCU_IDLE_GP_DELAY + jiffies, - RCU_IDLE_GP_DELAY) - jiffies; + rdtp->last_accelerate = jiffies; + + /* Request timer delay depending on laziness, and round. */ + if (rdtp->all_lazy) { + *dj = round_up(rcu_idle_gp_delay + jiffies, + rcu_idle_gp_delay) - jiffies; } else { - *delta_jiffies = jiffies + RCU_IDLE_LAZY_GP_DELAY; - *delta_jiffies = round_jiffies(*delta_jiffies) - jiffies; + *dj = round_jiffies(rcu_idle_lazy_gp_delay + jiffies) - jiffies; } return 0; } /* - * Handler for smp_call_function_single(). The only point of this - * handler is to wake the CPU up, so the handler does only tracing. - */ -void rcu_idle_demigrate(void *unused) -{ - trace_rcu_prep_idle("Demigrate"); -} - -/* - * Timer handler used to force CPU to start pushing its remaining RCU - * callbacks in the case where it entered dyntick-idle mode with callbacks - * pending. The hander doesn't really need to do anything because the - * real work is done upon re-entry to idle, or by the next scheduling-clock - * interrupt should idle not be re-entered. - * - * One special case: the timer gets migrated without awakening the CPU - * on which the timer was scheduled on. In this case, we must wake up - * that CPU. We do so with smp_call_function_single(). - */ -static void rcu_idle_gp_timer_func(unsigned long cpu_in) -{ - int cpu = (int)cpu_in; - - trace_rcu_prep_idle("Timer"); - if (cpu != smp_processor_id()) - smp_call_function_single(cpu, rcu_idle_demigrate, NULL, 0); - else - WARN_ON_ONCE(1); /* Getting here can hang the system... */ -} - -/* - * Initialize the timer used to pull CPUs out of dyntick-idle mode. - */ -static void rcu_prepare_for_idle_init(int cpu) -{ - struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu); - - rdtp->dyntick_holdoff = jiffies - 1; - setup_timer(&rdtp->idle_gp_timer, rcu_idle_gp_timer_func, cpu); - rdtp->idle_gp_timer_expires = jiffies - 1; - rdtp->idle_first_pass = 1; -} - -/* - * Clean up for exit from idle. Because we are exiting from idle, there - * is no longer any point to ->idle_gp_timer, so cancel it. This will - * do nothing if this timer is not active, so just cancel it unconditionally. - */ -static void rcu_cleanup_after_idle(int cpu) -{ - struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu); - - del_timer(&rdtp->idle_gp_timer); - trace_rcu_prep_idle("Cleanup after idle"); - rdtp->tick_nohz_enabled_snap = ACCESS_ONCE(tick_nohz_enabled); -} - -/* - * Check to see if any RCU-related work can be done by the current CPU, - * and if so, schedule a softirq to get it done. This function is part - * of the RCU implementation; it is -not- an exported member of the RCU API. - * - * The idea is for the current CPU to clear out all work required by the - * RCU core for the current grace period, so that this CPU can be permitted - * to enter dyntick-idle mode. In some cases, it will need to be awakened - * at the end of the grace period by whatever CPU ends the grace period. - * This allows CPUs to go dyntick-idle more quickly, and to reduce the - * number of wakeups by a modest integer factor. - * - * Because it is not legal to invoke rcu_process_callbacks() with irqs - * disabled, we do one pass of force_quiescent_state(), then do a - * invoke_rcu_core() to cause rcu_process_callbacks() to be invoked - * later. The ->dyntick_drain field controls the sequencing. + * Prepare a CPU for idle from an RCU perspective. The first major task + * is to sense whether nohz mode has been enabled or disabled via sysfs. + * The second major task is to check to see if a non-lazy callback has + * arrived at a CPU that previously had only lazy callbacks. The third + * major task is to accelerate (that is, assign grace-period numbers to) + * any recently arrived callbacks. * * The caller must have disabled interrupts. */ static void rcu_prepare_for_idle(int cpu) { - struct timer_list *tp; + struct rcu_data *rdp; struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu); + struct rcu_node *rnp; + struct rcu_state *rsp; int tne; /* Handle nohz enablement switches conservatively. */ tne = ACCESS_ONCE(tick_nohz_enabled); if (tne != rdtp->tick_nohz_enabled_snap) { - if (rcu_cpu_has_callbacks(cpu)) + if (rcu_cpu_has_callbacks(cpu, NULL)) invoke_rcu_core(); /* force nohz to see update. */ rdtp->tick_nohz_enabled_snap = tne; return; @@ -1789,125 +1704,56 @@ static void rcu_prepare_for_idle(int cpu) if (!tne) return; - /* Adaptive-tick mode, where usermode execution is idle to RCU. */ - if (!is_idle_task(current)) { - rdtp->dyntick_holdoff = jiffies - 1; - if (rcu_cpu_has_nonlazy_callbacks(cpu)) { - trace_rcu_prep_idle("User dyntick with callbacks"); - rdtp->idle_gp_timer_expires = - round_up(jiffies + RCU_IDLE_GP_DELAY, - RCU_IDLE_GP_DELAY); - } else if (rcu_cpu_has_callbacks(cpu)) { - rdtp->idle_gp_timer_expires = - round_jiffies(jiffies + RCU_IDLE_LAZY_GP_DELAY); - trace_rcu_prep_idle("User dyntick with lazy callbacks"); - } else { - return; - } - tp = &rdtp->idle_gp_timer; - mod_timer_pinned(tp, rdtp->idle_gp_timer_expires); + /* If this is a no-CBs CPU, no callbacks, just return. */ + if (is_nocb_cpu(cpu)) return; - } /* - * If this is an idle re-entry, for example, due to use of - * RCU_NONIDLE() or the new idle-loop tracing API within the idle - * loop, then don't take any state-machine actions, unless the - * momentary exit from idle queued additional non-lazy callbacks. - * Instead, repost the ->idle_gp_timer if this CPU has callbacks - * pending. + * If a non-lazy callback arrived at a CPU having only lazy + * callbacks, invoke RCU core for the side-effect of recalculating + * idle duration on re-entry to idle. */ - if (!rdtp->idle_first_pass && - (rdtp->nonlazy_posted == rdtp->nonlazy_posted_snap)) { - if (rcu_cpu_has_callbacks(cpu)) { - tp = &rdtp->idle_gp_timer; - mod_timer_pinned(tp, rdtp->idle_gp_timer_expires); - } + if (rdtp->all_lazy && + rdtp->nonlazy_posted != rdtp->nonlazy_posted_snap) { + invoke_rcu_core(); return; } - rdtp->idle_first_pass = 0; - rdtp->nonlazy_posted_snap = rdtp->nonlazy_posted - 1; /* - * If there are no callbacks on this CPU, enter dyntick-idle mode. - * Also reset state to avoid prejudicing later attempts. + * If we have not yet accelerated this jiffy, accelerate all + * callbacks on this CPU. */ - if (!rcu_cpu_has_callbacks(cpu)) { - rdtp->dyntick_holdoff = jiffies - 1; - rdtp->dyntick_drain = 0; - trace_rcu_prep_idle("No callbacks"); + if (rdtp->last_accelerate == jiffies) return; + rdtp->last_accelerate = jiffies; + for_each_rcu_flavor(rsp) { + rdp = per_cpu_ptr(rsp->rda, cpu); + if (!*rdp->nxttail[RCU_DONE_TAIL]) + continue; + rnp = rdp->mynode; + raw_spin_lock(&rnp->lock); /* irqs already disabled. */ + rcu_accelerate_cbs(rsp, rnp, rdp); + raw_spin_unlock(&rnp->lock); /* irqs remain disabled. */ } +} - /* - * If in holdoff mode, just return. We will presumably have - * refrained from disabling the scheduling-clock tick. - */ - if (rdtp->dyntick_holdoff == jiffies) { - trace_rcu_prep_idle("In holdoff"); - return; - } +/* + * Clean up for exit from idle. Attempt to advance callbacks based on + * any grace periods that elapsed while the CPU was idle, and if any + * callbacks are now ready to invoke, initiate invocation. + */ +static void rcu_cleanup_after_idle(int cpu) +{ + struct rcu_data *rdp; + struct rcu_state *rsp; - /* Check and update the ->dyntick_drain sequencing. */ - if (rdtp->dyntick_drain <= 0) { - /* First time through, initialize the counter. */ - rdtp->dyntick_drain = RCU_IDLE_FLUSHES; - } else if (rdtp->dyntick_drain <= RCU_IDLE_OPT_FLUSHES && - !rcu_pending(cpu) && - !local_softirq_pending()) { - /* Can we go dyntick-idle despite still having callbacks? */ - rdtp->dyntick_drain = 0; - rdtp->dyntick_holdoff = jiffies; - if (rcu_cpu_has_nonlazy_callbacks(cpu)) { - trace_rcu_prep_idle("Dyntick with callbacks"); - rdtp->idle_gp_timer_expires = - round_up(jiffies + RCU_IDLE_GP_DELAY, - RCU_IDLE_GP_DELAY); - } else { - rdtp->idle_gp_timer_expires = - round_jiffies(jiffies + RCU_IDLE_LAZY_GP_DELAY); - trace_rcu_prep_idle("Dyntick with lazy callbacks"); - } - tp = &rdtp->idle_gp_timer; - mod_timer_pinned(tp, rdtp->idle_gp_timer_expires); - rdtp->nonlazy_posted_snap = rdtp->nonlazy_posted; - return; /* Nothing more to do immediately. */ - } else if (--(rdtp->dyntick_drain) <= 0) { - /* We have hit the limit, so time to give up. */ - rdtp->dyntick_holdoff = jiffies; - trace_rcu_prep_idle("Begin holdoff"); - invoke_rcu_core(); /* Force the CPU out of dyntick-idle. */ + if (is_nocb_cpu(cpu)) return; - } - - /* - * Do one step of pushing the remaining RCU callbacks through - * the RCU core state machine. - */ -#ifdef CONFIG_TREE_PREEMPT_RCU - if (per_cpu(rcu_preempt_data, cpu).nxtlist) { - rcu_preempt_qs(cpu); - force_quiescent_state(&rcu_preempt_state); - } -#endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */ - if (per_cpu(rcu_sched_data, cpu).nxtlist) { - rcu_sched_qs(cpu); - force_quiescent_state(&rcu_sched_state); - } - if (per_cpu(rcu_bh_data, cpu).nxtlist) { - rcu_bh_qs(cpu); - force_quiescent_state(&rcu_bh_state); - } - - /* - * If RCU callbacks are still pending, RCU still needs this CPU. - * So try forcing the callbacks through the grace period. - */ - if (rcu_cpu_has_callbacks(cpu)) { - trace_rcu_prep_idle("More callbacks"); - invoke_rcu_core(); - } else { - trace_rcu_prep_idle("Callbacks drained"); + rcu_try_advance_all_cbs(); + for_each_rcu_flavor(rsp) { + rdp = per_cpu_ptr(rsp->rda, cpu); + if (cpu_has_callbacks_ready_to_invoke(rdp)) + invoke_rcu_core(); } } @@ -2015,16 +1861,13 @@ early_initcall(rcu_register_oom_notifier); static void print_cpu_stall_fast_no_hz(char *cp, int cpu) { struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu); - struct timer_list *tltp = &rdtp->idle_gp_timer; - char c; + unsigned long nlpd = rdtp->nonlazy_posted - rdtp->nonlazy_posted_snap; - c = rdtp->dyntick_holdoff == jiffies ? 'H' : '.'; - if (timer_pending(tltp)) - sprintf(cp, "drain=%d %c timer=%lu", - rdtp->dyntick_drain, c, tltp->expires - jiffies); - else - sprintf(cp, "drain=%d %c timer not pending", - rdtp->dyntick_drain, c); + sprintf(cp, "last_accelerate: %04lx/%04lx, nonlazy_posted: %ld, %c%c", + rdtp->last_accelerate & 0xffff, jiffies & 0xffff, + ulong2long(nlpd), + rdtp->all_lazy ? 'L' : '.', + rdtp->tick_nohz_enabled_snap ? '.' : 'D'); } #else /* #ifdef CONFIG_RCU_FAST_NO_HZ */ @@ -2070,10 +1913,11 @@ static void print_cpu_stall_info(struct rcu_state *rsp, int cpu) ticks_value = rsp->gpnum - rdp->gpnum; } print_cpu_stall_fast_no_hz(fast_no_hz, cpu); - printk(KERN_ERR "\t%d: (%lu %s) idle=%03x/%llx/%d %s\n", + printk(KERN_ERR "\t%d: (%lu %s) idle=%03x/%llx/%d softirq=%u/%u %s\n", cpu, ticks_value, ticks_title, atomic_read(&rdtp->dynticks) & 0xfff, rdtp->dynticks_nesting, rdtp->dynticks_nmi_nesting, + rdp->softirq_snap, kstat_softirqs_cpu(RCU_SOFTIRQ, cpu), fast_no_hz); } @@ -2087,6 +1931,7 @@ static void print_cpu_stall_info_end(void) static void zero_cpu_stall_ticks(struct rcu_data *rdp) { rdp->ticks_this_gp = 0; + rdp->softirq_snap = kstat_softirqs_cpu(RCU_SOFTIRQ, smp_processor_id()); } /* Increment ->ticks_this_gp for all flavors of RCU. */ @@ -2165,6 +2010,47 @@ static int __init parse_rcu_nocb_poll(char *arg) } early_param("rcu_nocb_poll", parse_rcu_nocb_poll); +/* + * Do any no-CBs CPUs need another grace period? + * + * Interrupts must be disabled. If the caller does not hold the root + * rnp_node structure's ->lock, the results are advisory only. + */ +static int rcu_nocb_needs_gp(struct rcu_state *rsp) +{ + struct rcu_node *rnp = rcu_get_root(rsp); + + return rnp->need_future_gp[(ACCESS_ONCE(rnp->completed) + 1) & 0x1]; +} + +/* + * Wake up any no-CBs CPUs' kthreads that were waiting on the just-ended + * grace period. + */ +static void rcu_nocb_gp_cleanup(struct rcu_state *rsp, struct rcu_node *rnp) +{ + wake_up_all(&rnp->nocb_gp_wq[rnp->completed & 0x1]); +} + +/* + * Set the root rcu_node structure's ->need_future_gp field + * based on the sum of those of all rcu_node structures. This does + * double-count the root rcu_node structure's requests, but this + * is necessary to handle the possibility of a rcu_nocb_kthread() + * having awakened during the time that the rcu_node structures + * were being updated for the end of the previous grace period. + */ +static void rcu_nocb_gp_set(struct rcu_node *rnp, int nrq) +{ + rnp->need_future_gp[(rnp->completed + 1) & 0x1] += nrq; +} + +static void rcu_init_one_nocb(struct rcu_node *rnp) +{ + init_waitqueue_head(&rnp->nocb_gp_wq[0]); + init_waitqueue_head(&rnp->nocb_gp_wq[1]); +} + /* Is the specified CPU a no-CPUs CPU? */ static bool is_nocb_cpu(int cpu) { @@ -2227,6 +2113,13 @@ static bool __call_rcu_nocb(struct rcu_data *rdp, struct rcu_head *rhp, if (!is_nocb_cpu(rdp->cpu)) return 0; __call_rcu_nocb_enqueue(rdp, rhp, &rhp->next, 1, lazy); + if (__is_kfree_rcu_offset((unsigned long)rhp->func)) + trace_rcu_kfree_callback(rdp->rsp->name, rhp, + (unsigned long)rhp->func, + rdp->qlen_lazy, rdp->qlen); + else + trace_rcu_callback(rdp->rsp->name, rhp, + rdp->qlen_lazy, rdp->qlen); return 1; } @@ -2265,95 +2158,36 @@ static bool __maybe_unused rcu_nocb_adopt_orphan_cbs(struct rcu_state *rsp, } /* - * There must be at least one non-no-CBs CPU in operation at any given - * time, because no-CBs CPUs are not capable of initiating grace periods - * independently. This function therefore complains if the specified - * CPU is the last non-no-CBs CPU, allowing the CPU-hotplug system to - * avoid offlining the last such CPU. (Recursion is a wonderful thing, - * but you have to have a base case!) + * If necessary, kick off a new grace period, and either way wait + * for a subsequent grace period to complete. */ -static bool nocb_cpu_expendable(int cpu) +static void rcu_nocb_wait_gp(struct rcu_data *rdp) { - cpumask_var_t non_nocb_cpus; - int ret; + unsigned long c; + bool d; + unsigned long flags; + struct rcu_node *rnp = rdp->mynode; + + raw_spin_lock_irqsave(&rnp->lock, flags); + c = rcu_start_future_gp(rnp, rdp); + raw_spin_unlock_irqrestore(&rnp->lock, flags); /* - * If there are no no-CB CPUs or if this CPU is not a no-CB CPU, - * then offlining this CPU is harmless. Let it happen. + * Wait for the grace period. Do so interruptibly to avoid messing + * up the load average. */ - if (!have_rcu_nocb_mask || is_nocb_cpu(cpu)) - return 1; - - /* If no memory, play it safe and keep the CPU around. */ - if (!alloc_cpumask_var(&non_nocb_cpus, GFP_NOIO)) - return 0; - cpumask_andnot(non_nocb_cpus, cpu_online_mask, rcu_nocb_mask); - cpumask_clear_cpu(cpu, non_nocb_cpus); - ret = !cpumask_empty(non_nocb_cpus); - free_cpumask_var(non_nocb_cpus); - return ret; -} - -/* - * Helper structure for remote registry of RCU callbacks. - * This is needed for when a no-CBs CPU needs to start a grace period. - * If it just invokes call_rcu(), the resulting callback will be queued, - * which can result in deadlock. - */ -struct rcu_head_remote { - struct rcu_head *rhp; - call_rcu_func_t *crf; - void (*func)(struct rcu_head *rhp); -}; - -/* - * Register a callback as specified by the rcu_head_remote struct. - * This function is intended to be invoked via smp_call_function_single(). - */ -static void call_rcu_local(void *arg) -{ - struct rcu_head_remote *rhrp = - container_of(arg, struct rcu_head_remote, rhp); - - rhrp->crf(rhrp->rhp, rhrp->func); -} - -/* - * Set up an rcu_head_remote structure and the invoke call_rcu_local() - * on CPU 0 (which is guaranteed to be a non-no-CBs CPU) via - * smp_call_function_single(). - */ -static void invoke_crf_remote(struct rcu_head *rhp, - void (*func)(struct rcu_head *rhp), - call_rcu_func_t crf) -{ - struct rcu_head_remote rhr; - - rhr.rhp = rhp; - rhr.crf = crf; - rhr.func = func; - smp_call_function_single(0, call_rcu_local, &rhr, 1); -} - -/* - * Helper functions to be passed to wait_rcu_gp(), each of which - * invokes invoke_crf_remote() to register a callback appropriately. - */ -static void __maybe_unused -call_rcu_preempt_remote(struct rcu_head *rhp, - void (*func)(struct rcu_head *rhp)) -{ - invoke_crf_remote(rhp, func, call_rcu); -} -static void call_rcu_bh_remote(struct rcu_head *rhp, - void (*func)(struct rcu_head *rhp)) -{ - invoke_crf_remote(rhp, func, call_rcu_bh); -} -static void call_rcu_sched_remote(struct rcu_head *rhp, - void (*func)(struct rcu_head *rhp)) -{ - invoke_crf_remote(rhp, func, call_rcu_sched); + trace_rcu_future_gp(rnp, rdp, c, "StartWait"); + for (;;) { + wait_event_interruptible( + rnp->nocb_gp_wq[c & 0x1], + (d = ULONG_CMP_GE(ACCESS_ONCE(rnp->completed), c))); + if (likely(d)) + break; + flush_signals(current); + trace_rcu_future_gp(rnp, rdp, c, "ResumeWait"); + } + trace_rcu_future_gp(rnp, rdp, c, "EndWait"); + smp_mb(); /* Ensure that CB invocation happens after GP end. */ } /* @@ -2390,7 +2224,7 @@ static int rcu_nocb_kthread(void *arg) cl = atomic_long_xchg(&rdp->nocb_q_count_lazy, 0); ACCESS_ONCE(rdp->nocb_p_count) += c; ACCESS_ONCE(rdp->nocb_p_count_lazy) += cl; - wait_rcu_gp(rdp->rsp->call_remote); + rcu_nocb_wait_gp(rdp); /* Each pass through the following loop invokes a callback. */ trace_rcu_batch_start(rdp->rsp->name, cl, c, -1); @@ -2436,32 +2270,41 @@ static void __init rcu_spawn_nocb_kthreads(struct rcu_state *rsp) return; for_each_cpu(cpu, rcu_nocb_mask) { rdp = per_cpu_ptr(rsp->rda, cpu); - t = kthread_run(rcu_nocb_kthread, rdp, "rcuo%d", cpu); + t = kthread_run(rcu_nocb_kthread, rdp, + "rcuo%c/%d", rsp->abbr, cpu); BUG_ON(IS_ERR(t)); ACCESS_ONCE(rdp->nocb_kthread) = t; } } /* Prevent __call_rcu() from enqueuing callbacks on no-CBs CPUs */ -static void init_nocb_callback_list(struct rcu_data *rdp) +static bool init_nocb_callback_list(struct rcu_data *rdp) { if (rcu_nocb_mask == NULL || !cpumask_test_cpu(rdp->cpu, rcu_nocb_mask)) - return; + return false; rdp->nxttail[RCU_NEXT_TAIL] = NULL; + return true; +} + +#else /* #ifdef CONFIG_RCU_NOCB_CPU */ + +static int rcu_nocb_needs_gp(struct rcu_state *rsp) +{ + return 0; } -/* Initialize the ->call_remote fields in the rcu_state structures. */ -static void __init rcu_init_nocb(void) +static void rcu_nocb_gp_cleanup(struct rcu_state *rsp, struct rcu_node *rnp) { -#ifdef CONFIG_PREEMPT_RCU - rcu_preempt_state.call_remote = call_rcu_preempt_remote; -#endif /* #ifdef CONFIG_PREEMPT_RCU */ - rcu_bh_state.call_remote = call_rcu_bh_remote; - rcu_sched_state.call_remote = call_rcu_sched_remote; } -#else /* #ifdef CONFIG_RCU_NOCB_CPU */ +static void rcu_nocb_gp_set(struct rcu_node *rnp, int nrq) +{ +} + +static void rcu_init_one_nocb(struct rcu_node *rnp) +{ +} static bool is_nocb_cpu(int cpu) { @@ -2480,11 +2323,6 @@ static bool __maybe_unused rcu_nocb_adopt_orphan_cbs(struct rcu_state *rsp, return 0; } -static bool nocb_cpu_expendable(int cpu) -{ - return 1; -} - static void __init rcu_boot_init_nocb_percpu_data(struct rcu_data *rdp) { } @@ -2493,12 +2331,9 @@ static void __init rcu_spawn_nocb_kthreads(struct rcu_state *rsp) { } -static void init_nocb_callback_list(struct rcu_data *rdp) -{ -} - -static void __init rcu_init_nocb(void) +static bool init_nocb_callback_list(struct rcu_data *rdp) { + return false; } #endif /* #else #ifdef CONFIG_RCU_NOCB_CPU */ diff --git a/kernel/rcutree_trace.c b/kernel/rcutree_trace.c index 0d095dcaa67..49099e81c87 100644 --- a/kernel/rcutree_trace.c +++ b/kernel/rcutree_trace.c @@ -46,8 +46,6 @@ #define RCU_TREE_NONCORE #include "rcutree.h" -#define ulong2long(a) (*(long *)(&(a))) - static int r_open(struct inode *inode, struct file *file, const struct seq_operations *op) { |