summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/ABI/testing/sysfs-bus-pci12
-rw-r--r--Documentation/ABI/testing/sysfs-tty9
-rw-r--r--Documentation/devicetree/bindings/arm/omap/omap.txt3
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-twl4030.txt6
-rw-r--r--Documentation/devicetree/bindings/i2c/trivial-devices.txt1
-rw-r--r--Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt52
-rw-r--r--Documentation/devicetree/bindings/lpddr2/lpddr2.txt102
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/ti/emif.txt55
-rw-r--r--Documentation/devicetree/bindings/tty/serial/nxp-lpc32xx-hsuart.txt14
-rw-r--r--Documentation/devicetree/bindings/tty/serial/of-serial.txt2
-rw-r--r--Documentation/feature-removal-schedule.txt2
-rw-r--r--Documentation/serial/00-INDEX2
-rw-r--r--Documentation/serial/computone.txt520
-rw-r--r--Makefile2
-rw-r--r--arch/alpha/kernel/srmcons.c1
-rw-r--r--arch/arm/Kconfig2
-rw-r--r--arch/arm/boot/dts/am335x-bone.dts60
-rw-r--r--arch/arm/boot/dts/am335x-evm.dts100
-rw-r--r--arch/arm/boot/dts/am33xx.dtsi71
-rw-r--r--arch/arm/boot/dts/at91sam9g25ek.dts2
-rw-r--r--arch/arm/boot/dts/elpida_ecb240abacn.dtsi67
-rw-r--r--arch/arm/boot/dts/omap2420-h4.dts2
-rw-r--r--arch/arm/boot/dts/omap2420.dtsi48
-rw-r--r--arch/arm/boot/dts/omap2430.dtsi92
-rw-r--r--arch/arm/boot/dts/omap3-beagle-xm.dts (renamed from arch/arm/boot/dts/omap3-beagle.dts)54
-rw-r--r--arch/arm/boot/dts/omap3-evm.dts13
-rw-r--r--arch/arm/boot/dts/omap3-overo.dtsi57
-rw-r--r--arch/arm/boot/dts/omap3-tobi.dts35
-rw-r--r--arch/arm/boot/dts/omap3.dtsi94
-rw-r--r--arch/arm/boot/dts/omap36xx.dtsi25
-rw-r--r--arch/arm/boot/dts/omap4-panda.dts11
-rw-r--r--arch/arm/boot/dts/omap4-sdp.dts127
-rw-r--r--arch/arm/boot/dts/omap4.dtsi195
-rw-r--r--arch/arm/boot/dts/omap5-evm.dts64
-rw-r--r--arch/arm/boot/dts/omap5.dtsi127
-rw-r--r--arch/arm/boot/dts/tps65217.dtsi56
-rw-r--r--arch/arm/boot/dts/tps65910.dtsi86
-rw-r--r--arch/arm/boot/dts/twl4030.dtsi6
-rw-r--r--arch/arm/boot/dts/twl6030.dtsi26
-rw-r--r--arch/arm/configs/armadillo800eva_defconfig2
-rw-r--r--arch/arm/configs/omap2plus_defconfig1
-rw-r--r--arch/arm/include/asm/dma-mapping.h7
-rw-r--r--arch/arm/mach-at91/at91rm9200_time.c2
-rw-r--r--arch/arm/mach-at91/at91sam9260_devices.c6
-rw-r--r--arch/arm/mach-at91/at91sam9261_devices.c6
-rw-r--r--arch/arm/mach-at91/at91sam9263_devices.c10
-rw-r--r--arch/arm/mach-at91/at91sam9g45_devices.c6
-rw-r--r--arch/arm/mach-at91/at91sam9rl_devices.c6
-rw-r--r--arch/arm/mach-at91/clock.c12
-rw-r--r--arch/arm/mach-gemini/irq.c1
-rw-r--r--arch/arm/mach-kirkwood/common.c7
-rw-r--r--arch/arm/mach-kirkwood/db88f6281-bp-setup.c1
-rw-r--r--arch/arm/mach-omap1/ams-delta-fiq-handler.S1
-rw-r--r--arch/arm/mach-omap1/board-ams-delta.c2
-rw-r--r--arch/arm/mach-omap1/board-fsample.c1
-rw-r--r--arch/arm/mach-omap1/board-generic.c6
-rw-r--r--arch/arm/mach-omap1/board-htcherald.c3
-rw-r--r--arch/arm/mach-omap1/board-nokia770.c1
-rw-r--r--arch/arm/mach-omap1/board-osk.c2
-rw-r--r--arch/arm/mach-omap1/board-palmte.c2
-rw-r--r--arch/arm/mach-omap1/board-palmtt.c2
-rw-r--r--arch/arm/mach-omap1/board-palmz71.c2
-rw-r--r--arch/arm/mach-omap1/board-perseus2.c1
-rw-r--r--arch/arm/mach-omap1/board-sx1.c1
-rw-r--r--arch/arm/mach-omap1/board-voiceblue.c6
-rw-r--r--arch/arm/mach-omap1/clock_data.c8
-rw-r--r--arch/arm/mach-omap1/devices.c3
-rw-r--r--arch/arm/mach-omap1/dma.c3
-rw-r--r--arch/arm/mach-omap1/gpio15xx.c1
-rw-r--r--arch/arm/mach-omap1/gpio16xx.c1
-rw-r--r--arch/arm/mach-omap1/gpio7xx.c1
-rw-r--r--arch/arm/mach-omap1/include/mach/ams-delta-fiq.h2
-rw-r--r--arch/arm/mach-omap1/include/mach/gpio.h2
-rw-r--r--arch/arm/mach-omap1/include/mach/hardware.h285
-rw-r--r--arch/arm/mach-omap1/include/mach/irqs.h267
-rw-r--r--arch/arm/mach-omap1/include/mach/omap1510.h (renamed from arch/arm/plat-omap/include/plat/omap1510.h)3
-rw-r--r--arch/arm/mach-omap1/include/mach/omap16xx.h (renamed from arch/arm/plat-omap/include/plat/omap16xx.h)3
-rw-r--r--arch/arm/mach-omap1/include/mach/omap7xx.h (renamed from arch/arm/plat-omap/include/plat/omap7xx.h)3
-rw-r--r--arch/arm/mach-omap1/leds-h2p2-debug.c1
-rw-r--r--arch/arm/mach-omap1/leds.c1
-rw-r--r--arch/arm/mach-omap1/serial.c1
-rw-r--r--arch/arm/mach-omap2/Kconfig1
-rw-r--r--arch/arm/mach-omap2/Makefile.boot6
-rw-r--r--arch/arm/mach-omap2/am33xx.h (renamed from arch/arm/plat-omap/include/plat/am33xx.h)0
-rw-r--r--arch/arm/mach-omap2/board-2430sdp.c6
-rw-r--r--arch/arm/mach-omap2/board-3430sdp.c10
-rw-r--r--arch/arm/mach-omap2/board-3630sdp.c6
-rw-r--r--arch/arm/mach-omap2/board-4430sdp.c6
-rw-r--r--arch/arm/mach-omap2/board-am3517crane.c10
-rw-r--r--arch/arm/mach-omap2/board-am3517evm.c11
-rw-r--r--arch/arm/mach-omap2/board-apollon.c2
-rw-r--r--arch/arm/mach-omap2/board-cm-t35.c10
-rw-r--r--arch/arm/mach-omap2/board-cm-t3517.c9
-rw-r--r--arch/arm/mach-omap2/board-devkit8000.c7
-rw-r--r--arch/arm/mach-omap2/board-flash.c4
-rw-r--r--arch/arm/mach-omap2/board-generic.c2
-rw-r--r--arch/arm/mach-omap2/board-h4.c5
-rw-r--r--arch/arm/mach-omap2/board-igep0020.c5
-rw-r--r--arch/arm/mach-omap2/board-ldp.c7
-rw-r--r--arch/arm/mach-omap2/board-n8x0.c5
-rw-r--r--arch/arm/mach-omap2/board-omap3beagle.c5
-rw-r--r--arch/arm/mach-omap2/board-omap3evm.c23
-rw-r--r--arch/arm/mach-omap2/board-omap3logic.c18
-rw-r--r--arch/arm/mach-omap2/board-omap3pandora.c5
-rw-r--r--arch/arm/mach-omap2/board-omap3stalker.c15
-rw-r--r--arch/arm/mach-omap2/board-omap3touchbook.c5
-rw-r--r--arch/arm/mach-omap2/board-omap4panda.c6
-rw-r--r--arch/arm/mach-omap2/board-overo.c6
-rw-r--r--arch/arm/mach-omap2/board-rm680.c6
-rw-r--r--arch/arm/mach-omap2/board-rx51-peripherals.c6
-rw-r--r--arch/arm/mach-omap2/board-rx51.c2
-rw-r--r--arch/arm/mach-omap2/board-ti8168evm.c8
-rw-r--r--arch/arm/mach-omap2/board-zoom-debugboard.c3
-rw-r--r--arch/arm/mach-omap2/board-zoom-display.c2
-rw-r--r--arch/arm/mach-omap2/board-zoom-peripherals.c6
-rw-r--r--arch/arm/mach-omap2/board-zoom.c1
-rw-r--r--arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c2
-rw-r--r--arch/arm/mach-omap2/clkt_dpll.c2
-rw-r--r--arch/arm/mach-omap2/clock.c8
-rw-r--r--arch/arm/mach-omap2/clock2420_data.c2
-rw-r--r--arch/arm/mach-omap2/clock2430.c2
-rw-r--r--arch/arm/mach-omap2/clock2430_data.c2
-rw-r--r--arch/arm/mach-omap2/clock2xxx.c2
-rw-r--r--arch/arm/mach-omap2/clock33xx_data.c2
-rw-r--r--arch/arm/mach-omap2/clock3xxx.c2
-rw-r--r--arch/arm/mach-omap2/clock3xxx_data.c2
-rw-r--r--arch/arm/mach-omap2/clock44xx_data.c2
-rw-r--r--arch/arm/mach-omap2/cm2xxx_3xxx.c3
-rw-r--r--arch/arm/mach-omap2/common-board-devices.c1
-rw-r--r--arch/arm/mach-omap2/common.c3
-rw-r--r--arch/arm/mach-omap2/common.h9
-rw-r--r--arch/arm/mach-omap2/control.c2
-rw-r--r--arch/arm/mach-omap2/control.h2
-rw-r--r--arch/arm/mach-omap2/cpuidle34xx.c1
-rw-r--r--arch/arm/mach-omap2/devices.c19
-rw-r--r--arch/arm/mach-omap2/dpll3xxx.c2
-rw-r--r--arch/arm/mach-omap2/dpll44xx.c2
-rw-r--r--arch/arm/mach-omap2/emu.c3
-rw-r--r--arch/arm/mach-omap2/gpio.c1
-rw-r--r--arch/arm/mach-omap2/gpmc-nand.c32
-rw-r--r--arch/arm/mach-omap2/gpmc-onenand.c27
-rw-r--r--arch/arm/mach-omap2/gpmc-smc91x.c3
-rw-r--r--arch/arm/mach-omap2/gpmc-smsc911x.c1
-rw-r--r--arch/arm/mach-omap2/gpmc.c167
-rw-r--r--arch/arm/mach-omap2/hsmmc.c2
-rw-r--r--arch/arm/mach-omap2/i2c.c1
-rw-r--r--arch/arm/mach-omap2/id.c2
-rw-r--r--arch/arm/mach-omap2/include/mach/gpio.h2
-rw-r--r--arch/arm/mach-omap2/include/mach/hardware.h2
-rw-r--r--arch/arm/mach-omap2/include/mach/irqs.h2
-rw-r--r--arch/arm/mach-omap2/io.c1
-rw-r--r--arch/arm/mach-omap2/irq.c5
-rw-r--r--arch/arm/mach-omap2/mailbox.c4
-rw-r--r--arch/arm/mach-omap2/mcbsp.c2
-rw-r--r--arch/arm/mach-omap2/msdi.c1
-rw-r--r--arch/arm/mach-omap2/omap-iommu.c12
-rw-r--r--arch/arm/mach-omap2/omap-mpuss-lowpower.c3
-rw-r--r--arch/arm/mach-omap2/omap-smp.c2
-rw-r--r--arch/arm/mach-omap2/omap-wakeupgen.c1
-rw-r--r--arch/arm/mach-omap2/omap24xx.h (renamed from arch/arm/plat-omap/include/plat/omap24xx.h)2
-rw-r--r--arch/arm/mach-omap2/omap34xx.h (renamed from arch/arm/plat-omap/include/plat/omap34xx.h)2
-rw-r--r--arch/arm/mach-omap2/omap4-common.c14
-rw-r--r--arch/arm/mach-omap2/omap44xx.h (renamed from arch/arm/plat-omap/include/plat/omap44xx.h)2
-rw-r--r--arch/arm/mach-omap2/omap54xx.h (renamed from arch/arm/plat-omap/include/plat/omap54xx.h)0
-rw-r--r--arch/arm/mach-omap2/omap_hwmod.c35
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_2420_data.c25
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_2430_data.c73
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c108
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c8
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_3xxx_data.c152
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_44xx_data.c3
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_common_data.h1
-rw-r--r--arch/arm/mach-omap2/omap_l3_noc.c5
-rw-r--r--arch/arm/mach-omap2/omap_phy_internal.c2
-rw-r--r--arch/arm/mach-omap2/opp2420_data.c2
-rw-r--r--arch/arm/mach-omap2/opp2430_data.c2
-rw-r--r--arch/arm/mach-omap2/opp3xxx_data.c2
-rw-r--r--arch/arm/mach-omap2/opp4xxx_data.c3
-rw-r--r--arch/arm/mach-omap2/pm-debug.c1
-rw-r--r--arch/arm/mach-omap2/pm24xx.c14
-rw-r--r--arch/arm/mach-omap2/pm34xx.c2
-rw-r--r--arch/arm/mach-omap2/powerdomain.c6
-rw-r--r--arch/arm/mach-omap2/powerdomains3xxx_data.c4
-rw-r--r--arch/arm/mach-omap2/prcm.c1
-rw-r--r--arch/arm/mach-omap2/prm2xxx_3xxx.c7
-rw-r--r--arch/arm/mach-omap2/prm44xx.c5
-rw-r--r--arch/arm/mach-omap2/prm_common.c1
-rw-r--r--arch/arm/mach-omap2/sdrc2xxx.c2
-rw-r--r--arch/arm/mach-omap2/serial.c20
-rw-r--r--arch/arm/mach-omap2/sleep24xx.S3
-rw-r--r--arch/arm/mach-omap2/sleep34xx.S2
-rw-r--r--arch/arm/mach-omap2/sleep44xx.S2
-rw-r--r--arch/arm/mach-omap2/soc.h7
-rw-r--r--arch/arm/mach-omap2/sram242x.S3
-rw-r--r--arch/arm/mach-omap2/sram243x.S3
-rw-r--r--arch/arm/mach-omap2/sram34xx.S3
-rw-r--r--arch/arm/mach-omap2/ti81xx.h (renamed from arch/arm/plat-omap/include/plat/ti81xx.h)0
-rw-r--r--arch/arm/mach-omap2/timer.c15
-rw-r--r--arch/arm/mach-omap2/twl-common.c3
-rw-r--r--arch/arm/mach-omap2/twl-common.h6
-rw-r--r--arch/arm/mach-omap2/usb-host.c2
-rw-r--r--arch/arm/mach-omap2/usb-musb.c7
-rw-r--r--arch/arm/mach-omap2/vc.c3
-rw-r--r--arch/arm/mach-omap2/voltagedomains3xxx_data.c3
-rw-r--r--arch/arm/mach-shmobile/board-armadillo800eva.c13
-rw-r--r--arch/arm/mach-shmobile/board-mackerel.c3
-rw-r--r--arch/arm/mach-shmobile/board-marzen.c2
-rw-r--r--arch/arm/mach-shmobile/intc-sh73a0.c4
-rw-r--r--arch/arm/mach-ux500/board-mop500.c21
-rw-r--r--arch/arm/mm/dma-mapping.c114
-rw-r--r--arch/arm/plat-omap/Kconfig1
-rw-r--r--arch/arm/plat-omap/Makefile3
-rw-r--r--arch/arm/plat-omap/common.c40
-rw-r--r--arch/arm/plat-omap/counter_32k.c3
-rw-r--r--arch/arm/plat-omap/debug-devices.c3
-rw-r--r--arch/arm/plat-omap/debug-leds.c1
-rw-r--r--arch/arm/plat-omap/devices.c92
-rw-r--r--arch/arm/plat-omap/dma.c3
-rw-r--r--arch/arm/plat-omap/fb.c2
-rw-r--r--arch/arm/plat-omap/i2c.c3
-rw-r--r--arch/arm/plat-omap/include/plat/board.h138
-rw-r--r--arch/arm/plat-omap/include/plat/cpu.h3
-rw-r--r--arch/arm/plat-omap/include/plat/debug-devices.h9
-rw-r--r--arch/arm/plat-omap/include/plat/dma.h2
-rw-r--r--arch/arm/plat-omap/include/plat/gpio-switch.h54
-rw-r--r--arch/arm/plat-omap/include/plat/gpmc.h19
-rw-r--r--arch/arm/plat-omap/include/plat/hardware.h293
-rw-r--r--arch/arm/plat-omap/include/plat/irqs-44xx.h144
-rw-r--r--arch/arm/plat-omap/include/plat/irqs.h453
-rw-r--r--arch/arm/plat-omap/include/plat/mmc.h1
-rw-r--r--arch/arm/plat-omap/include/plat/nand.h3
-rw-r--r--arch/arm/plat-omap/include/plat/omap-serial.h50
-rw-r--r--arch/arm/plat-omap/include/plat/omap4-keypad.h2
-rw-r--r--arch/arm/plat-omap/include/plat/omap_hwmod.h1
-rw-r--r--arch/arm/plat-omap/include/plat/usb.h1
-rw-r--r--arch/arm/plat-omap/omap_device.c79
-rw-r--r--arch/arm/plat-omap/sram.c1
-rw-r--r--arch/ia64/hp/sim/simserial.c3
-rw-r--r--arch/m68k/emu/nfcon.c4
-rw-r--r--arch/mips/cavium-octeon/serial.c30
-rw-r--r--arch/mips/sni/a20r.c32
-rw-r--r--arch/parisc/kernel/pdc_cons.c1
-rw-r--r--arch/powerpc/include/asm/processor.h1
-rw-r--r--arch/powerpc/kernel/asm-offsets.c1
-rw-r--r--arch/powerpc/kernel/dbell.c2
-rw-r--r--arch/powerpc/kernel/entry_64.S23
-rw-r--r--arch/powerpc/kernel/exceptions-64s.S3
-rw-r--r--arch/powerpc/kernel/idle_power7.S2
-rw-r--r--arch/powerpc/kernel/process.c12
-rw-r--r--arch/powerpc/kernel/smp.c11
-rw-r--r--arch/powerpc/kernel/sysfs.c10
-rw-r--r--arch/powerpc/kernel/time.c9
-rw-r--r--arch/powerpc/kernel/traps.c3
-rw-r--r--arch/powerpc/lib/code-patching.c2
-rw-r--r--arch/powerpc/mm/numa.c7
-rw-r--r--arch/powerpc/platforms/powernv/smp.c10
-rw-r--r--arch/powerpc/sysdev/xics/icp-hv.c6
-rw-r--r--arch/um/drivers/line.c3
-rw-r--r--arch/um/os-Linux/time.c2
-rw-r--r--arch/x86/xen/mmu.c2
-rw-r--r--arch/x86/xen/p2m.c2
-rw-r--r--arch/xtensa/platforms/iss/console.c1
-rw-r--r--drivers/base/dma-contiguous.c2
-rw-r--r--drivers/bluetooth/hci_ath.c2
-rw-r--r--drivers/char/mwave/mwavedd.c16
-rw-r--r--drivers/char/pcmcia/synclink_cs.c131
-rw-r--r--drivers/char/ttyprintk.c33
-rw-r--r--drivers/dma/omap-dma.c2
-rw-r--r--drivers/gpio/Kconfig2
-rw-r--r--drivers/gpio/gpio-em.c4
-rw-r--r--drivers/gpio/gpio-omap.c15
-rw-r--r--drivers/gpio/gpio-rdc321x.c1
-rw-r--r--drivers/gpio/gpio-twl4030.c90
-rw-r--r--drivers/gpio/gpiolib-of.c2
-rw-r--r--drivers/hid/hid-core.c7
-rw-r--r--drivers/hid/hid-logitech-dj.c4
-rw-r--r--drivers/hid/usbhid/hid-quirks.c1
-rw-r--r--drivers/input/keyboard/Kconfig2
-rw-r--r--drivers/input/keyboard/imx_keypad.c3
-rw-r--r--drivers/input/keyboard/omap-keypad.c154
-rw-r--r--drivers/input/serio/i8042-x86ia64io.h14
-rw-r--r--drivers/input/tablet/wacom_wac.c6
-rw-r--r--drivers/input/touchscreen/edt-ft5x06.c2
-rw-r--r--drivers/isdn/capi/capi.c3
-rw-r--r--drivers/isdn/gigaset/interface.c7
-rw-r--r--drivers/isdn/i4l/isdn_tty.c41
-rw-r--r--drivers/media/video/omap/omap_vout.c1
-rw-r--r--drivers/media/video/omap3isp/isp.c2
-rw-r--r--drivers/mfd/twl-core.c2
-rw-r--r--drivers/misc/ibmasm/uart.c16
-rw-r--r--drivers/misc/pti.c128
-rw-r--r--drivers/mmc/card/block.c26
-rw-r--r--drivers/mmc/card/sdio_uart.c24
-rw-r--r--drivers/mmc/host/atmel-mci.c6
-rw-r--r--drivers/mmc/host/bfin_sdh.c7
-rw-r--r--drivers/mmc/host/dw_mmc.c85
-rw-r--r--drivers/mmc/host/mxs-mmc.c14
-rw-r--r--drivers/mmc/host/omap.c15
-rw-r--r--drivers/mmc/host/omap_hsmmc.c1
-rw-r--r--drivers/mmc/host/sdhci-esdhc.h6
-rw-r--r--drivers/mtd/nand/ams-delta.c8
-rw-r--r--drivers/mtd/nand/omap2.c301
-rw-r--r--drivers/mtd/onenand/omap2.c32
-rw-r--r--drivers/mtd/ubi/vtbl.c4
-rw-r--r--drivers/net/can/sja1000/sja1000_platform.c4
-rw-r--r--drivers/net/can/softing/softing_fw.c7
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x.h3
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c4
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h4
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c2
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c18
-rw-r--r--drivers/net/ethernet/cirrus/cs89x0.c10
-rw-r--r--drivers/net/ethernet/emulex/benet/be_cmds.c6
-rw-r--r--drivers/net/ethernet/emulex/benet/be_main.c2
-rw-r--r--drivers/net/ethernet/freescale/gianfar.c2
-rw-r--r--drivers/net/ethernet/intel/e1000e/e1000.h1
-rw-r--r--drivers/net/ethernet/intel/e1000e/netdev.c48
-rw-r--r--drivers/net/ethernet/sfc/ethtool.c4
-rw-r--r--drivers/net/ethernet/sgi/ioc3-eth.c22
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/common.h5
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/descs.h6
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/descs_com.h5
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac100.h5
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac1000.h5
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h5
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/mmc.h5
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/mmc_core.c6
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac.h5
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h4
-rw-r--r--drivers/net/ethernet/ti/davinci_mdio.c4
-rw-r--r--drivers/net/fddi/skfp/pmf.c2
-rw-r--r--drivers/net/irda/irtty-sir.c10
-rw-r--r--drivers/net/usb/hso.c19
-rw-r--r--drivers/net/usb/qmi_wwan.c4
-rw-r--r--drivers/net/usb/usbnet.c2
-rw-r--r--drivers/net/wireless/ath/ath5k/eeprom.c2
-rw-r--r--drivers/net/wireless/ath/ath5k/eeprom.h1
-rw-r--r--drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c3
-rw-r--r--drivers/net/wireless/ipw2x00/ipw2100.c3
-rw-r--r--drivers/net/wireless/iwlwifi/dvm/debugfs.c3
-rw-r--r--drivers/net/wireless/iwlwifi/pcie/internal.h2
-rw-r--r--drivers/net/wireless/iwlwifi/pcie/rx.c2
-rw-r--r--drivers/net/wireless/iwlwifi/pcie/trans.c30
-rw-r--r--drivers/net/xen-netfront.c39
-rw-r--r--drivers/parport/parport_gsc.c1
-rw-r--r--drivers/parport/parport_serial.c11
-rw-r--r--drivers/pci/pci-driver.c6
-rw-r--r--drivers/pci/pci-sysfs.c42
-rw-r--r--drivers/pci/pci.c1
-rw-r--r--drivers/pci/pcie/portdrv_pci.c14
-rw-r--r--drivers/pci/probe.c31
-rw-r--r--drivers/power/avs/smartreflex.c2
-rw-r--r--drivers/rtc/rtc-at91sam9.c22
-rw-r--r--drivers/s390/char/con3215.c28
-rw-r--r--drivers/s390/char/sclp_tty.c1
-rw-r--r--drivers/s390/char/sclp_vt220.c1
-rw-r--r--drivers/s390/char/tty3270.c34
-rw-r--r--drivers/spi/spi-omap-uwire.c3
-rw-r--r--drivers/staging/ipack/devices/ipoctal.c14
-rw-r--r--drivers/staging/serqt_usb2/serqt_usb2.c18
-rw-r--r--drivers/staging/speakup/serialio.h3
-rw-r--r--drivers/staging/tidspbridge/core/wdt.c2
-rw-r--r--drivers/tty/amiserial.c45
-rw-r--r--drivers/tty/bfin_jtag_comm.c1
-rw-r--r--drivers/tty/cyclades.c102
-rw-r--r--drivers/tty/ehv_bytechan.c9
-rw-r--r--drivers/tty/hvc/hvc_console.c31
-rw-r--r--drivers/tty/hvc/hvcs.c82
-rw-r--r--drivers/tty/hvc/hvsi.c2
-rw-r--r--drivers/tty/hvc/hvsi_lib.c2
-rw-r--r--drivers/tty/ipwireless/tty.c2
-rw-r--r--drivers/tty/isicom.c13
-rw-r--r--drivers/tty/moxa.c39
-rw-r--r--drivers/tty/mxser.c63
-rw-r--r--drivers/tty/n_gsm.c142
-rw-r--r--drivers/tty/n_r3964.c10
-rw-r--r--drivers/tty/n_tty.c29
-rw-r--r--drivers/tty/nozomi.c4
-rw-r--r--drivers/tty/pty.c234
-rw-r--r--drivers/tty/rocket.c22
-rw-r--r--drivers/tty/serial/68328serial.c23
-rw-r--r--drivers/tty/serial/8250/8250.c84
-rw-r--r--drivers/tty/serial/8250/8250.h34
-rw-r--r--drivers/tty/serial/8250/8250_acorn.c22
-rw-r--r--drivers/tty/serial/8250/8250_dw.c38
-rw-r--r--drivers/tty/serial/8250/8250_gsc.c26
-rw-r--r--drivers/tty/serial/8250/8250_hp300.c26
-rw-r--r--drivers/tty/serial/8250/8250_pci.c205
-rw-r--r--drivers/tty/serial/8250/8250_pnp.c28
-rw-r--r--drivers/tty/serial/8250/serial_cs.c30
-rw-r--r--drivers/tty/serial/Kconfig50
-rw-r--r--drivers/tty/serial/Makefile4
-rw-r--r--drivers/tty/serial/altera_uart.c6
-rw-r--r--drivers/tty/serial/amba-pl010.c15
-rw-r--r--drivers/tty/serial/amba-pl011.c89
-rw-r--r--drivers/tty/serial/bfin_uart.c2
-rw-r--r--drivers/tty/serial/crisv10.c45
-rw-r--r--drivers/tty/serial/ifx6x60.c4
-rw-r--r--drivers/tty/serial/imx.c5
-rw-r--r--drivers/tty/serial/ioc3_serial.c3
-rw-r--r--drivers/tty/serial/ioc4_serial.c5
-rw-r--r--drivers/tty/serial/jsm/jsm_tty.c8
-rw-r--r--drivers/tty/serial/lpc32xx_hs.c823
-rw-r--r--drivers/tty/serial/m32r_sio.c36
-rw-r--r--drivers/tty/serial/max3100.c12
-rw-r--r--drivers/tty/serial/max3107.c1215
-rw-r--r--drivers/tty/serial/max3107.h441
-rw-r--r--drivers/tty/serial/max310x.c1260
-rw-r--r--drivers/tty/serial/mpc52xx_uart.c8
-rw-r--r--drivers/tty/serial/msm_serial.c2
-rw-r--r--drivers/tty/serial/msm_smd_tty.c8
-rw-r--r--drivers/tty/serial/mxs-auart.c7
-rw-r--r--drivers/tty/serial/of_serial.c13
-rw-r--r--drivers/tty/serial/omap-serial.c860
-rw-r--r--drivers/tty/serial/pch_uart.c4
-rw-r--r--drivers/tty/serial/pxa.c14
-rw-r--r--drivers/tty/serial/samsung.c46
-rw-r--r--drivers/tty/serial/sc26xx.c4
-rw-r--r--drivers/tty/serial/sccnxp.c985
-rw-r--r--drivers/tty/serial/serial_core.c223
-rw-r--r--drivers/tty/serial/sirfsoc_uart.c8
-rw-r--r--drivers/tty/serial/sunsu.c8
-rw-r--r--drivers/tty/synclink.c86
-rw-r--r--drivers/tty/synclink_gt.c37
-rw-r--r--drivers/tty/synclinkmp.c58
-rw-r--r--drivers/tty/tty_io.c375
-rw-r--r--drivers/tty/tty_ioctl.c100
-rw-r--r--drivers/tty/tty_ldisc.c78
-rw-r--r--drivers/tty/tty_mutex.c71
-rw-r--r--drivers/tty/tty_port.c94
-rw-r--r--drivers/tty/vt/keyboard.c50
-rw-r--r--drivers/tty/vt/vt.c141
-rw-r--r--drivers/usb/class/cdc-acm.c5
-rw-r--r--drivers/usb/gadget/u_serial.c3
-rw-r--r--drivers/usb/serial/ark3116.c4
-rw-r--r--drivers/usb/serial/belkin_sa.c2
-rw-r--r--drivers/usb/serial/console.c4
-rw-r--r--drivers/usb/serial/cp210x.c8
-rw-r--r--drivers/usb/serial/cypress_m8.c40
-rw-r--r--drivers/usb/serial/digi_acceleport.c14
-rw-r--r--drivers/usb/serial/empeg.c2
-rw-r--r--drivers/usb/serial/f81232.c3
-rw-r--r--drivers/usb/serial/ftdi_sio.c2
-rw-r--r--drivers/usb/serial/io_edgeport.c12
-rw-r--r--drivers/usb/serial/io_ti.c12
-rw-r--r--drivers/usb/serial/ir-usb.c2
-rw-r--r--drivers/usb/serial/iuu_phoenix.c28
-rw-r--r--drivers/usb/serial/keyspan.c6
-rw-r--r--drivers/usb/serial/keyspan_pda.c4
-rw-r--r--drivers/usb/serial/kl5kusb105.c18
-rw-r--r--drivers/usb/serial/kobil_sct.c14
-rw-r--r--drivers/usb/serial/mct_u232.c4
-rw-r--r--drivers/usb/serial/metro-usb.c6
-rw-r--r--drivers/usb/serial/mos7720.c14
-rw-r--r--drivers/usb/serial/mos7840.c12
-rw-r--r--drivers/usb/serial/oti6858.c10
-rw-r--r--drivers/usb/serial/pl2303.c6
-rw-r--r--drivers/usb/serial/quatech2.c4
-rw-r--r--drivers/usb/serial/sierra.c2
-rw-r--r--drivers/usb/serial/spcp8x5.c12
-rw-r--r--drivers/usb/serial/ssu100.c4
-rw-r--r--drivers/usb/serial/ti_usb_3410_5052.c10
-rw-r--r--drivers/usb/serial/usb-serial.c7
-rw-r--r--drivers/usb/serial/usb_wwan.c2
-rw-r--r--drivers/usb/serial/whiteheat.c2
-rw-r--r--drivers/video/auo_k190x.c2
-rw-r--r--drivers/video/backlight/omap1_bl.c2
-rw-r--r--drivers/video/console/bitblit.c2
-rw-r--r--drivers/video/console/fbcon.c2
-rw-r--r--drivers/video/mb862xx/mb862xxfbdrv.c2
-rw-r--r--drivers/video/omap2/dss/dispc.c1
-rw-r--r--drivers/video/omap2/dss/sdi.c14
-rw-r--r--drivers/video/omap2/omapfb/omapfb-main.c3
-rw-r--r--drivers/w1/masters/omap_hdq.c3
-rw-r--r--drivers/watchdog/omap_wdt.c5
-rw-r--r--drivers/xen/swiotlb-xen.c2
-rw-r--r--drivers/xen/xen-pciback/pci_stub.c8
-rw-r--r--firmware/Makefile1
-rw-r--r--firmware/intelliport2.bin.ihex2147
-rw-r--r--fs/cifs/cifssmb.c11
-rw-r--r--fs/cifs/dir.c9
-rw-r--r--fs/cifs/inode.c24
-rw-r--r--fs/cifs/link.c2
-rw-r--r--fs/cifs/smb2misc.c16
-rw-r--r--fs/cifs/smb2pdu.h10
-rw-r--r--fs/cifs/transport.c9
-rw-r--r--include/linux/Kbuild4
-rw-r--r--include/linux/amba/serial.h1
-rw-r--r--include/linux/cd1400.h292
-rw-r--r--include/linux/cdk.h486
-rw-r--r--include/linux/comstats.h119
-rw-r--r--include/linux/generic_serial.h35
-rw-r--r--include/linux/i2c/twl.h3
-rw-r--r--include/linux/istallion.h123
-rw-r--r--include/linux/kbd_kern.h13
-rw-r--r--include/linux/kernel.h12
-rw-r--r--include/linux/mfd/twl6040.h1
-rw-r--r--include/linux/mmc/card.h1
-rw-r--r--include/linux/omapfb.h7
-rw-r--r--include/linux/pci_ids.h2
-rw-r--r--include/linux/platform_data/gpio-omap.h (renamed from arch/arm/plat-omap/include/plat/gpio.h)15
-rw-r--r--include/linux/platform_data/max310x.h67
-rw-r--r--include/linux/platform_data/omap1_bl.h11
-rw-r--r--include/linux/platform_data/sccnxp.h93
-rw-r--r--include/linux/sc26198.h533
-rw-r--r--include/linux/serial.h81
-rw-r--r--include/linux/serial167.h157
-rw-r--r--include/linux/serial_8250.h33
-rw-r--r--include/linux/serial_core.h4
-rw-r--r--include/linux/serial_reg.h4
-rw-r--r--include/linux/stallion.h147
-rw-r--r--include/linux/tty.h92
-rw-r--r--include/linux/tty_driver.h47
-rw-r--r--include/linux/tty_flags.h78
-rw-r--r--include/net/irda/ircomm_tty.h17
-rw-r--r--include/net/netfilter/nf_conntrack_ecache.h1
-rw-r--r--mm/mempolicy.c2
-rw-r--r--net/bluetooth/rfcomm/tty.c10
-rw-r--r--net/core/netpoll.c10
-rw-r--r--net/ipv4/ipmr.c14
-rw-r--r--net/ipv4/netfilter/nf_nat_sip.c5
-rw-r--r--net/ipv4/route.c6
-rw-r--r--net/ipv4/tcp_input.c15
-rw-r--r--net/ipv6/esp6.c6
-rw-r--r--net/irda/ircomm/ircomm_param.c5
-rw-r--r--net/irda/ircomm/ircomm_tty.c320
-rw-r--r--net/irda/ircomm/ircomm_tty_attach.c40
-rw-r--r--net/irda/ircomm/ircomm_tty_ioctl.c33
-rw-r--r--net/l2tp/l2tp_core.c3
-rw-r--r--net/l2tp/l2tp_core.h1
-rw-r--r--net/mac80211/tx.c38
-rw-r--r--net/netfilter/ipvs/ip_vs_ctl.c4
-rw-r--r--net/netfilter/nf_conntrack_core.c16
-rw-r--r--net/netfilter/nf_conntrack_netlink.c3
-rw-r--r--net/netfilter/nfnetlink_log.c6
-rw-r--r--net/netlink/af_netlink.c4
-rw-r--r--net/packet/af_packet.c2
-rw-r--r--net/socket.c4
-rw-r--r--net/xfrm/xfrm_state.c4
-rw-r--r--scripts/Makefile.fwinst2
-rw-r--r--scripts/link-vmlinux.sh2
-rw-r--r--sound/pci/hda/hda_codec.c10
-rw-r--r--sound/pci/hda/hda_codec.h1
-rw-r--r--sound/pci/hda/patch_sigmatel.c4
-rw-r--r--sound/soc/omap/mcbsp.c2
-rw-r--r--sound/soc/omap/omap-abe-twl6040.c4
-rw-r--r--sound/soc/omap/omap-mcbsp.c1
-rw-r--r--sound/soc/omap/omap-mcpdm.c2
-rw-r--r--sound/soc/omap/omap-pcm.c1
-rw-r--r--sound/soc/omap/sdp3430.c1
-rw-r--r--sound/usb/card.c4
-rw-r--r--sound/usb/endpoint.c24
-rw-r--r--sound/usb/endpoint.h3
-rw-r--r--sound/usb/pcm.c64
554 files changed, 10469 insertions, 11431 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
index 34f51100f02..dff1f48d252 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci
+++ b/Documentation/ABI/testing/sysfs-bus-pci
@@ -210,3 +210,15 @@ Users:
firmware assigned instance number of the PCI
device that can help in understanding the firmware
intended order of the PCI device.
+
+What: /sys/bus/pci/devices/.../d3cold_allowed
+Date: July 2012
+Contact: Huang Ying <ying.huang@intel.com>
+Description:
+ d3cold_allowed is bit to control whether the corresponding PCI
+ device can be put into D3Cold state. If it is cleared, the
+ device will never be put into D3Cold state. If it is set, the
+ device may be put into D3Cold state if other requirements are
+ satisfied too. Reading this attribute will show the current
+ value of d3cold_allowed bit. Writing this attribute will set
+ the value of d3cold_allowed bit.
diff --git a/Documentation/ABI/testing/sysfs-tty b/Documentation/ABI/testing/sysfs-tty
index b138b663bf5..0c430150d92 100644
--- a/Documentation/ABI/testing/sysfs-tty
+++ b/Documentation/ABI/testing/sysfs-tty
@@ -17,3 +17,12 @@ Description:
device, like 'tty1'.
The file supports poll() to detect virtual
console switches.
+
+What: /sys/class/tty/ttyS0/uartclk
+Date: Sep 2012
+Contact: Tomas Hlavacek <tmshlvck@gmail.com>
+Description:
+ Shows the current uartclk value associated with the
+ UART port in serial_core, that is bound to TTY like ttyS0.
+ uartclk = 16 * baud_base
+
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index ccdd0e53451..d0051a75058 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -36,6 +36,9 @@ Boards:
- OMAP3 BeagleBoard : Low cost community board
compatible = "ti,omap3-beagle", "ti,omap3"
+- OMAP3 Tobi with Overo : Commercial expansion board with daughter board
+ compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3"
+
- OMAP4 SDP : Software Developement Board
compatible = "ti,omap4-sdp", "ti,omap4430"
diff --git a/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt b/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt
index 16695d9cf1e..66788fda1db 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt
@@ -11,6 +11,11 @@ Required properties:
- interrupt-controller: Mark the device node as an interrupt controller
The first cell is the GPIO number.
The second cell is not used.
+- ti,use-leds : Enables LEDA and LEDB outputs if set
+- ti,debounce : if n-th bit is set, debounces GPIO-n
+- ti,mmc-cd : if n-th bit is set, GPIO-n controls VMMC(n+1)
+- ti,pullups : if n-th bit is set, set a pullup on GPIO-n
+- ti,pulldowns : if n-th bit is set, set a pulldown on GPIO-n
Example:
@@ -20,4 +25,5 @@ twl_gpio: gpio {
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
+ ti,use-leds;
};
diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
index 1a85f986961..2f5322b119e 100644
--- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -56,3 +56,4 @@ stm,m41t00 Serial Access TIMEKEEPER
stm,m41t62 Serial real-time clock (RTC) with alarm
stm,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS
ti,tsc2003 I2C Touch-Screen Controller
+ti,tmp102 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
diff --git a/Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt b/Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt
new file mode 100644
index 00000000000..9ceb19e0c7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt
@@ -0,0 +1,52 @@
+* AC timing parameters of LPDDR2(JESD209-2) memories for a given speed-bin
+
+Required properties:
+- compatible : Should be "jedec,lpddr2-timings"
+- min-freq : minimum DDR clock frequency for the speed-bin. Type is <u32>
+- max-freq : maximum DDR clock frequency for the speed-bin. Type is <u32>
+
+Optional properties:
+
+The following properties represent AC timing parameters from the memory
+data-sheet of the device for a given speed-bin. All these properties are
+of type <u32> and the default unit is ps (pico seconds). Parameters with
+a different unit have a suffix indicating the unit such as 'tRAS-max-ns'
+- tRCD
+- tWR
+- tRAS-min
+- tRRD
+- tWTR
+- tXP
+- tRTP
+- tDQSCK-max
+- tFAW
+- tZQCS
+- tZQinit
+- tRPab
+- tZQCL
+- tCKESR
+- tRAS-max-ns
+- tDQSCK-max-derated
+
+Example:
+
+timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
+ compatible = "jedec,lpddr2-timings";
+ min-freq = <10000000>;
+ max-freq = <400000000>;
+ tRPab = <21000>;
+ tRCD = <18000>;
+ tWR = <15000>;
+ tRAS-min = <42000>;
+ tRRD = <10000>;
+ tWTR = <7500>;
+ tXP = <7500>;
+ tRTP = <7500>;
+ tCKESR = <15000>;
+ tDQSCK-max = <5500>;
+ tFAW = <50000>;
+ tZQCS = <90000>;
+ tZQCL = <360000>;
+ tZQinit = <1000000>;
+ tRAS-max-ns = <70000>;
+};
diff --git a/Documentation/devicetree/bindings/lpddr2/lpddr2.txt b/Documentation/devicetree/bindings/lpddr2/lpddr2.txt
new file mode 100644
index 00000000000..58354a075e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/lpddr2/lpddr2.txt
@@ -0,0 +1,102 @@
+* LPDDR2 SDRAM memories compliant to JEDEC JESD209-2
+
+Required properties:
+- compatible : Should be one of - "jedec,lpddr2-nvm", "jedec,lpddr2-s2",
+ "jedec,lpddr2-s4"
+
+ "ti,jedec-lpddr2-s2" should be listed if the memory part is LPDDR2-S2 type
+
+ "ti,jedec-lpddr2-s4" should be listed if the memory part is LPDDR2-S4 type
+
+ "ti,jedec-lpddr2-nvm" should be listed if the memory part is LPDDR2-NVM type
+
+- density : <u32> representing density in Mb (Mega bits)
+
+- io-width : <u32> representing bus width. Possible values are 8, 16, and 32
+
+Optional properties:
+
+The following optional properties represent the minimum value of some AC
+timing parameters of the DDR device in terms of number of clock cycles.
+These values shall be obtained from the device data-sheet.
+- tRRD-min-tck
+- tWTR-min-tck
+- tXP-min-tck
+- tRTP-min-tck
+- tCKE-min-tck
+- tRPab-min-tck
+- tRCD-min-tck
+- tWR-min-tck
+- tRASmin-min-tck
+- tCKESR-min-tck
+- tFAW-min-tck
+
+Child nodes:
+- The lpddr2 node may have one or more child nodes of type "lpddr2-timings".
+ "lpddr2-timings" provides AC timing parameters of the device for
+ a given speed-bin. The user may provide the timings for as many
+ speed-bins as is required. Please see Documentation/devicetree/
+ bindings/lpddr2/lpddr2-timings.txt for more information on "lpddr2-timings"
+
+Example:
+
+elpida_ECB240ABACN : lpddr2 {
+ compatible = "Elpida,ECB240ABACN","jedec,lpddr2-s4";
+ density = <2048>;
+ io-width = <32>;
+
+ tRPab-min-tck = <3>;
+ tRCD-min-tck = <3>;
+ tWR-min-tck = <3>;
+ tRASmin-min-tck = <3>;
+ tRRD-min-tck = <2>;
+ tWTR-min-tck = <2>;
+ tXP-min-tck = <2>;
+ tRTP-min-tck = <2>;
+ tCKE-min-tck = <3>;
+ tCKESR-min-tck = <3>;
+ tFAW-min-tck = <8>;
+
+ timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
+ compatible = "jedec,lpddr2-timings";
+ min-freq = <10000000>;
+ max-freq = <400000000>;
+ tRPab = <21000>;
+ tRCD = <18000>;
+ tWR = <15000>;
+ tRAS-min = <42000>;
+ tRRD = <10000>;
+ tWTR = <7500>;
+ tXP = <7500>;
+ tRTP = <7500>;
+ tCKESR = <15000>;
+ tDQSCK-max = <5500>;
+ tFAW = <50000>;
+ tZQCS = <90000>;
+ tZQCL = <360000>;
+ tZQinit = <1000000>;
+ tRAS-max-ns = <70000>;
+ };
+
+ timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 {
+ compatible = "jedec,lpddr2-timings";
+ min-freq = <10000000>;
+ max-freq = <200000000>;
+ tRPab = <21000>;
+ tRCD = <18000>;
+ tWR = <15000>;
+ tRAS-min = <42000>;
+ tRRD = <10000>;
+ tWTR = <10000>;
+ tXP = <7500>;
+ tRTP = <7500>;
+ tCKESR = <15000>;
+ tDQSCK-max = <5500>;
+ tFAW = <50000>;
+ tZQCS = <90000>;
+ tZQCL = <360000>;
+ tZQinit = <1000000>;
+ tRAS-max-ns = <70000>;
+ };
+
+}
diff --git a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
new file mode 100644
index 00000000000..938f8e1ba20
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
@@ -0,0 +1,55 @@
+* EMIF family of TI SDRAM controllers
+
+EMIF - External Memory Interface - is an SDRAM controller used in
+TI SoCs. EMIF supports, based on the IP revision, one or more of
+DDR2/DDR3/LPDDR2 protocols. This binding describes a given instance
+of the EMIF IP and memory parts attached to it.
+
+Required properties:
+- compatible : Should be of the form "ti,emif-<ip-rev>" where <ip-rev>
+ is the IP revision of the specific EMIF instance.
+
+- phy-type : <u32> indicating the DDR phy type. Following are the
+ allowed values
+ <1> : Attila PHY
+ <2> : Intelli PHY
+
+- device-handle : phandle to a "lpddr2" node representing the memory part
+
+- ti,hwmods : For TI hwmods processing and omap device creation
+ the value shall be "emif<n>" where <n> is the number of the EMIF
+ instance with base 1.
+
+Optional properties:
+- cs1-used : Have this property if CS1 of this EMIF
+ instance has a memory part attached to it. If there is a memory
+ part attached to CS1, it should be the same type as the one on CS0,
+ so there is no need to give the details of this memory part.
+
+- cal-resistor-per-cs : Have this property if the board has one
+ calibration resistor per chip-select.
+
+- hw-caps-read-idle-ctrl: Have this property if the controller
+ supports read idle window programming
+
+- hw-caps-dll-calib-ctrl: Have this property if the controller
+ supports dll calibration control
+
+- hw-caps-ll-interface : Have this property if the controller
+ has a low latency interface and corresponding interrupt events
+
+- hw-caps-temp-alert : Have this property if the controller
+ has capability for generating SDRAM temperature alerts
+
+Example:
+
+emif1: emif@0x4c000000 {
+ compatible = "ti,emif-4d";
+ ti,hwmods = "emif2";
+ phy-type = <1>;
+ device-handle = <&elpida_ECB240ABACN>;
+ cs1-used;
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+};
diff --git a/Documentation/devicetree/bindings/tty/serial/nxp-lpc32xx-hsuart.txt b/Documentation/devicetree/bindings/tty/serial/nxp-lpc32xx-hsuart.txt
new file mode 100644
index 00000000000..0d439dfc1aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/tty/serial/nxp-lpc32xx-hsuart.txt
@@ -0,0 +1,14 @@
+* NXP LPC32xx SoC High Speed UART
+
+Required properties:
+- compatible: Should be "nxp,lpc3220-hsuart"
+- reg: Should contain registers location and length
+- interrupts: Should contain interrupt
+
+Example:
+
+ uart1: serial@40014000 {
+ compatible = "nxp,lpc3220-hsuart";
+ reg = <0x40014000 0x1000>;
+ interrupts = <26 0>;
+ };
diff --git a/Documentation/devicetree/bindings/tty/serial/of-serial.txt b/Documentation/devicetree/bindings/tty/serial/of-serial.txt
index 0847fdeee11..ba385f2e0dd 100644
--- a/Documentation/devicetree/bindings/tty/serial/of-serial.txt
+++ b/Documentation/devicetree/bindings/tty/serial/of-serial.txt
@@ -25,6 +25,8 @@ Optional properties:
accesses to the UART (e.g. TI davinci).
- used-by-rtas : set to indicate that the port is in use by the OpenFirmware
RTAS and should not be registered.
+- no-loopback-test: set to indicate that the port does not implements loopback
+ test mode
Example:
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index afaff312bf4..f4d8c7105fc 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -579,7 +579,7 @@ Why: KVM tracepoints provide mostly equivalent information in a much more
----------------------------
What: at91-mci driver ("CONFIG_MMC_AT91")
-When: 3.7
+When: 3.8
Why: There are two mci drivers: at91-mci and atmel-mci. The PDC support
was added to atmel-mci as a first step to support more chips.
Then at91-mci was kept only for old IP versions (on at91rm9200 and
diff --git a/Documentation/serial/00-INDEX b/Documentation/serial/00-INDEX
index e09468ad3cb..f7b0c7dc25e 100644
--- a/Documentation/serial/00-INDEX
+++ b/Documentation/serial/00-INDEX
@@ -2,8 +2,6 @@
- this file.
README.cycladesZ
- info on Cyclades-Z firmware loading.
-computone.txt
- - info on Computone Intelliport II/Plus Multiport Serial Driver.
digiepca.txt
- info on Digi Intl. {PC,PCI,EISA}Xx and Xem series cards.
hayes-esp.txt
diff --git a/Documentation/serial/computone.txt b/Documentation/serial/computone.txt
deleted file mode 100644
index a6a1158ea2b..00000000000
--- a/Documentation/serial/computone.txt
+++ /dev/null
@@ -1,520 +0,0 @@
-NOTE: This is an unmaintained driver. It is not guaranteed to work due to
-changes made in the tty layer in 2.6. If you wish to take over maintenance of
-this driver, contact Michael Warfield <mhw@wittsend.com>.
-
-Changelog:
-----------
-11-01-2001: Original Document
-
-10-29-2004: Minor misspelling & format fix, update status of driver.
- James Nelson <james4765@gmail.com>
-
-Computone Intelliport II/Plus Multiport Serial Driver
------------------------------------------------------
-
-Release Notes For Linux Kernel 2.2 and higher.
-These notes are for the drivers which have already been integrated into the
-kernel and have been tested on Linux kernels 2.0, 2.2, 2.3, and 2.4.
-
-Version: 1.2.14
-Date: 11/01/2001
-Historical Author: Andrew Manison <amanison@america.net>
-Primary Author: Doug McNash
-
-This file assumes that you are using the Computone drivers which are
-integrated into the kernel sources. For updating the drivers or installing
-drivers into kernels which do not already have Computone drivers, please
-refer to the instructions in the README.computone file in the driver patch.
-
-
-1. INTRODUCTION
-
-This driver supports the entire family of Intelliport II/Plus controllers
-with the exception of the MicroChannel controllers. It does not support
-products previous to the Intelliport II.
-
-This driver was developed on the v2.0.x Linux tree and has been tested up
-to v2.4.14; it will probably not work with earlier v1.X kernels,.
-
-
-2. QUICK INSTALLATION
-
-Hardware - If you have an ISA card, find a free interrupt and io port.
- List those in use with `cat /proc/interrupts` and
- `cat /proc/ioports`. Set the card dip switches to a free
- address. You may need to configure your BIOS to reserve an
- irq for an ISA card. PCI and EISA parameters are set
- automagically. Insert card into computer with the power off
- before or after drivers installation.
-
- Note the hardware address from the Computone ISA cards installed into
- the system. These are required for editing ip2.c or editing
- /etc/modprobe.d/*.conf, or for specification on the modprobe
- command line.
-
- Note that the /etc/modules.conf should be used for older (pre-2.6)
- kernels.
-
-Software -
-
-Module installation:
-
-a) Determine free irq/address to use if any (configure BIOS if need be)
-b) Run "make config" or "make menuconfig" or "make xconfig"
- Select (m) module for CONFIG_COMPUTONE under character
- devices. CONFIG_PCI and CONFIG_MODULES also may need to be set.
-c) Set address on ISA cards then:
- edit /usr/src/linux/drivers/char/ip2.c if needed
- or
- edit config file in /etc/modprobe.d/ if needed (module).
- or both to match this setting.
-d) Run "make modules"
-e) Run "make modules_install"
-f) Run "/sbin/depmod -a"
-g) install driver using `modprobe ip2 <options>` (options listed below)
-h) run ip2mkdev (either the script below or the binary version)
-
-
-Kernel installation:
-
-a) Determine free irq/address to use if any (configure BIOS if need be)
-b) Run "make config" or "make menuconfig" or "make xconfig"
- Select (y) kernel for CONFIG_COMPUTONE under character
- devices. CONFIG_PCI may need to be set if you have PCI bus.
-c) Set address on ISA cards then:
- edit /usr/src/linux/drivers/char/ip2.c
- (Optional - may be specified on kernel command line now)
-d) Run "make zImage" or whatever target you prefer.
-e) mv /usr/src/linux/arch/x86/boot/zImage to /boot.
-f) Add new config for this kernel into /etc/lilo.conf, run "lilo"
- or copy to a floppy disk and boot from that floppy disk.
-g) Reboot using this kernel
-h) run ip2mkdev (either the script below or the binary version)
-
-Kernel command line options:
-
-When compiling the driver into the kernel, io and irq may be
-compiled into the driver by editing ip2.c and setting the values for
-io and irq in the appropriate array. An alternative is to specify
-a command line parameter to the kernel at boot up.
-
- ip2=io0,irq0,io1,irq1,io2,irq2,io3,irq3
-
-Note that this order is very different from the specifications for the
-modload parameters which have separate IRQ and IO specifiers.
-
-The io port also selects PCI (1) and EISA (2) boards.
-
- io=0 No board
- io=1 PCI board
- io=2 EISA board
- else ISA board io address
-
-You only need to specify the boards which are present.
-
- Examples:
-
- 2 PCI boards:
-
- ip2=1,0,1,0
-
- 1 ISA board at 0x310 irq 5:
-
- ip2=0x310,5
-
-This can be added to and "append" option in lilo.conf similar to this:
-
- append="ip2=1,0,1,0"
-
-
-3. INSTALLATION
-
-Previously, the driver sources were packaged with a set of patch files
-to update the character drivers' makefile and configuration file, and other
-kernel source files. A build script (ip2build) was included which applies
-the patches if needed, and build any utilities needed.
-What you receive may be a single patch file in conventional kernel
-patch format build script. That form can also be applied by
-running patch -p1 < ThePatchFile. Otherwise run ip2build.
-
-The driver can be installed as a module (recommended) or built into the
-kernel. This is selected as for other drivers through the `make config`
-command from the root of the Linux source tree. If the driver is built
-into the kernel you will need to edit the file ip2.c to match the boards
-you are installing. See that file for instructions. If the driver is
-installed as a module the configuration can also be specified on the
-modprobe command line as follows:
-
- modprobe ip2 irq=irq1,irq2,irq3,irq4 io=addr1,addr2,addr3,addr4
-
-where irqnum is one of the valid Intelliport II interrupts (3,4,5,7,10,11,
-12,15) and addr1-4 are the base addresses for up to four controllers. If
-the irqs are not specified the driver uses the default in ip2.c (which
-selects polled mode). If no base addresses are specified the defaults in
-ip2.c are used. If you are autoloading the driver module with kerneld or
-kmod the base addresses and interrupt number must also be set in ip2.c
-and recompile or just insert and options line in /etc/modprobe.d/*.conf or both.
-The options line is equivalent to the command line and takes precedence over
-what is in ip2.c.
-
-config sample to put /etc/modprobe.d/*.conf:
- options ip2 io=1,0x328 irq=1,10
- alias char-major-71 ip2
- alias char-major-72 ip2
- alias char-major-73 ip2
-
-The equivalent in ip2.c:
-
-static int io[IP2_MAX_BOARDS]= { 1, 0x328, 0, 0 };
-static int irq[IP2_MAX_BOARDS] = { 1, 10, -1, -1 };
-
-The equivalent for the kernel command line (in lilo.conf):
-
- append="ip2=1,1,0x328,10"
-
-
-Note: Both io and irq should be updated to reflect YOUR system. An "io"
- address of 1 or 2 indicates a PCI or EISA card in the board table.
- The PCI or EISA irq will be assigned automatically.
-
-Specifying an invalid or in-use irq will default the driver into
-running in polled mode for that card. If all irq entries are 0 then
-all cards will operate in polled mode.
-
-If you select the driver as part of the kernel run :
-
- make zlilo (or whatever you do to create a bootable kernel)
-
-If you selected a module run :
-
- make modules && make modules_install
-
-The utility ip2mkdev (see 5 and 7 below) creates all the device nodes
-required by the driver. For a device to be created it must be configured
-in the driver and the board must be installed. Only devices corresponding
-to real IntelliPort II ports are created. With multiple boards and expansion
-boxes this will leave gaps in the sequence of device names. ip2mkdev uses
-Linux tty naming conventions: ttyF0 - ttyF255 for normal devices, and
-cuf0 - cuf255 for callout devices.
-
-
-4. USING THE DRIVERS
-
-As noted above, the driver implements the ports in accordance with Linux
-conventions, and the devices should be interchangeable with the standard
-serial devices. (This is a key point for problem reporting: please make
-sure that what you are trying do works on the ttySx/cuax ports first; then
-tell us what went wrong with the ip2 ports!)
-
-Higher speeds can be obtained using the setserial utility which remaps
-38,400 bps (extb) to 57,600 bps, 115,200 bps, or a custom speed.
-Intelliport II installations using the PowerPort expansion module can
-use the custom speed setting to select the highest speeds: 153,600 bps,
-230,400 bps, 307,200 bps, 460,800bps and 921,600 bps. The base for
-custom baud rate configuration is fixed at 921,600 for cards/expansion
-modules with ST654's and 115200 for those with Cirrus CD1400's. This
-corresponds to the maximum bit rates those chips are capable.
-For example if the baud base is 921600 and the baud divisor is 18 then
-the custom rate is 921600/18 = 51200 bps. See the setserial man page for
-complete details. Of course if stty accepts the higher rates now you can
-use that as well as the standard ioctls().
-
-
-5. ip2mkdev and assorted utilities...
-
-Several utilities, including the source for a binary ip2mkdev utility are
-available under .../drivers/char/ip2. These can be build by changing to
-that directory and typing "make" after the kernel has be built. If you do
-not wish to compile the binary utilities, the shell script below can be
-cut out and run as "ip2mkdev" to create the necessary device files. To
-use the ip2mkdev script, you must have procfs enabled and the proc file
-system mounted on /proc.
-
-
-6. NOTES
-
-This is a release version of the driver, but it is impossible to test it
-in all configurations of Linux. If there is any anomalous behaviour that
-does not match the standard serial port's behaviour please let us know.
-
-
-7. ip2mkdev shell script
-
-Previously, this script was simply attached here. It is now attached as a
-shar archive to make it easier to extract the script from the documentation.
-To create the ip2mkdev shell script change to a convenient directory (/tmp
-works just fine) and run the following command:
-
- unshar Documentation/serial/computone.txt
- (This file)
-
-You should now have a file ip2mkdev in your current working directory with
-permissions set to execute. Running that script with then create the
-necessary devices for the Computone boards, interfaces, and ports which
-are present on you system at the time it is run.
-
-
-#!/bin/sh
-# This is a shell archive (produced by GNU sharutils 4.2.1).
-# To extract the files from this archive, save it to some FILE, remove
-# everything before the `!/bin/sh' line above, then type `sh FILE'.
-#
-# Made on 2001-10-29 10:32 EST by <mhw@alcove.wittsend.com>.
-# Source directory was `/home2/src/tmp'.
-#
-# Existing files will *not* be overwritten unless `-c' is specified.
-#
-# This shar contains:
-# length mode name
-# ------ ---------- ------------------------------------------
-# 4251 -rwxr-xr-x ip2mkdev
-#
-save_IFS="${IFS}"
-IFS="${IFS}:"
-gettext_dir=FAILED
-locale_dir=FAILED
-first_param="$1"
-for dir in $PATH
-do
- if test "$gettext_dir" = FAILED && test -f $dir/gettext \
- && ($dir/gettext --version >/dev/null 2>&1)
- then
- set `$dir/gettext --version 2>&1`
- if test "$3" = GNU
- then
- gettext_dir=$dir
- fi
- fi
- if test "$locale_dir" = FAILED && test -f $dir/shar \
- && ($dir/shar --print-text-domain-dir >/dev/null 2>&1)
- then
- locale_dir=`$dir/shar --print-text-domain-dir`
- fi
-done
-IFS="$save_IFS"
-if test "$locale_dir" = FAILED || test "$gettext_dir" = FAILED
-then
- echo=echo
-else
- TEXTDOMAINDIR=$locale_dir
- export TEXTDOMAINDIR
- TEXTDOMAIN=sharutils
- export TEXTDOMAIN
- echo="$gettext_dir/gettext -s"
-fi
-if touch -am -t 200112312359.59 $$.touch >/dev/null 2>&1 && test ! -f 200112312359.59 -a -f $$.touch; then
- shar_touch='touch -am -t $1$2$3$4$5$6.$7 "$8"'
-elif touch -am 123123592001.59 $$.touch >/dev/null 2>&1 && test ! -f 123123592001.59 -a ! -f 123123592001.5 -a -f $$.touch; then
- shar_touch='touch -am $3$4$5$6$1$2.$7 "$8"'
-elif touch -am 1231235901 $$.touch >/dev/null 2>&1 && test ! -f 1231235901 -a -f $$.touch; then
- shar_touch='touch -am $3$4$5$6$2 "$8"'
-else
- shar_touch=:
- echo
- $echo 'WARNING: not restoring timestamps. Consider getting and'
- $echo "installing GNU \`touch', distributed in GNU File Utilities..."
- echo
-fi
-rm -f 200112312359.59 123123592001.59 123123592001.5 1231235901 $$.touch
-#
-if mkdir _sh17581; then
- $echo 'x -' 'creating lock directory'
-else
- $echo 'failed to create lock directory'
- exit 1
-fi
-# ============= ip2mkdev ==============
-if test -f 'ip2mkdev' && test "$first_param" != -c; then
- $echo 'x -' SKIPPING 'ip2mkdev' '(file already exists)'
-else
- $echo 'x -' extracting 'ip2mkdev' '(text)'
- sed 's/^X//' << 'SHAR_EOF' > 'ip2mkdev' &&
-#!/bin/sh -
-#
-# ip2mkdev
-#
-# Make or remove devices as needed for Computone Intelliport drivers
-#
-# First rule! If the dev file exists and you need it, don't mess
-# with it. That prevents us from screwing up open ttys, ownership
-# and permissions on a running system!
-#
-# This script will NOT remove devices that no longer exist if their
-# board or interface box has been removed. If you want to get rid
-# of them, you can manually do an "rm -f /dev/ttyF* /dev/cuaf*"
-# before running this script. Running this script will then recreate
-# all the valid devices.
-#
-# Michael H. Warfield
-# /\/\|=mhw=|\/\/
-# mhw@wittsend.com
-#
-# Updated 10/29/2000 for version 1.2.13 naming convention
-# under devfs. /\/\|=mhw=|\/\/
-#
-# Updated 03/09/2000 for devfs support in ip2 drivers. /\/\|=mhw=|\/\/
-#
-X
-if test -d /dev/ip2 ; then
-# This is devfs mode... We don't do anything except create symlinks
-# from the real devices to the old names!
-X cd /dev
-X echo "Creating symbolic links to devfs devices"
-X for i in `ls ip2` ; do
-X if test ! -L ip2$i ; then
-X # Remove it incase it wasn't a symlink (old device)
-X rm -f ip2$i
-X ln -s ip2/$i ip2$i
-X fi
-X done
-X for i in `( cd tts ; ls F* )` ; do
-X if test ! -L tty$i ; then
-X # Remove it incase it wasn't a symlink (old device)
-X rm -f tty$i
-X ln -s tts/$i tty$i
-X fi
-X done
-X for i in `( cd cua ; ls F* )` ; do
-X DEVNUMBER=`expr $i : 'F\(.*\)'`
-X if test ! -L cuf$DEVNUMBER ; then
-X # Remove it incase it wasn't a symlink (old device)
-X rm -f cuf$DEVNUMBER
-X ln -s cua/$i cuf$DEVNUMBER
-X fi
-X done
-X exit 0
-fi
-X
-if test ! -f /proc/tty/drivers
-then
-X echo "\
-Unable to check driver status.
-Make sure proc file system is mounted."
-X
-X exit 255
-fi
-X
-if test ! -f /proc/tty/driver/ip2
-then
-X echo "\
-Unable to locate ip2 proc file.
-Attempting to load driver"
-X
-X if /sbin/insmod ip2
-X then
-X if test ! -f /proc/tty/driver/ip2
-X then
-X echo "\
-Unable to locate ip2 proc file after loading driver.
-Driver initialization failure or driver version error.
-"
-X exit 255
-X fi
-X else
-X echo "Unable to load ip2 driver."
-X exit 255
-X fi
-fi
-X
-# Ok... So we got the driver loaded and we can locate the procfs files.
-# Next we need our major numbers.
-X
-TTYMAJOR=`sed -e '/^ip2/!d' -e '/\/dev\/tt/!d' -e 's/.*tt[^ ]*[ ]*\([0-9]*\)[ ]*.*/\1/' < /proc/tty/drivers`
-CUAMAJOR=`sed -e '/^ip2/!d' -e '/\/dev\/cu/!d' -e 's/.*cu[^ ]*[ ]*\([0-9]*\)[ ]*.*/\1/' < /proc/tty/drivers`
-BRDMAJOR=`sed -e '/^Driver: /!d' -e 's/.*IMajor=\([0-9]*\)[ ]*.*/\1/' < /proc/tty/driver/ip2`
-X
-echo "\
-TTYMAJOR = $TTYMAJOR
-CUAMAJOR = $CUAMAJOR
-BRDMAJOR = $BRDMAJOR
-"
-X
-# Ok... Now we should know our major numbers, if appropriate...
-# Now we need our boards and start the device loops.
-X
-grep '^Board [0-9]:' /proc/tty/driver/ip2 | while read token number type alltherest
-do
-X # The test for blank "type" will catch the stats lead-in lines
-X # if they exist in the file
-X if test "$type" = "vacant" -o "$type" = "Vacant" -o "$type" = ""
-X then
-X continue
-X fi
-X
-X BOARDNO=`expr "$number" : '\([0-9]\):'`
-X PORTS=`expr "$alltherest" : '.*ports=\([0-9]*\)' | tr ',' ' '`
-X MINORS=`expr "$alltherest" : '.*minors=\([0-9,]*\)' | tr ',' ' '`
-X
-X if test "$BOARDNO" = "" -o "$PORTS" = ""
-X then
-# This may be a bug. We should at least get this much information
-X echo "Unable to process board line"
-X continue
-X fi
-X
-X if test "$MINORS" = ""
-X then
-# Silently skip this one. This board seems to have no boxes
-X continue
-X fi
-X
-X echo "board $BOARDNO: $type ports = $PORTS; port numbers = $MINORS"
-X
-X if test "$BRDMAJOR" != ""
-X then
-X BRDMINOR=`expr $BOARDNO \* 4`
-X STSMINOR=`expr $BRDMINOR + 1`
-X if test ! -c /dev/ip2ipl$BOARDNO ; then
-X mknod /dev/ip2ipl$BOARDNO c $BRDMAJOR $BRDMINOR
-X fi
-X if test ! -c /dev/ip2stat$BOARDNO ; then
-X mknod /dev/ip2stat$BOARDNO c $BRDMAJOR $STSMINOR
-X fi
-X fi
-X
-X if test "$TTYMAJOR" != ""
-X then
-X PORTNO=$BOARDBASE
-X
-X for PORTNO in $MINORS
-X do
-X if test ! -c /dev/ttyF$PORTNO ; then
-X # We got the hardware but no device - make it
-X mknod /dev/ttyF$PORTNO c $TTYMAJOR $PORTNO
-X fi
-X done
-X fi
-X
-X if test "$CUAMAJOR" != ""
-X then
-X PORTNO=$BOARDBASE
-X
-X for PORTNO in $MINORS
-X do
-X if test ! -c /dev/cuf$PORTNO ; then
-X # We got the hardware but no device - make it
-X mknod /dev/cuf$PORTNO c $CUAMAJOR $PORTNO
-X fi
-X done
-X fi
-done
-X
-Xexit 0
-SHAR_EOF
- (set 20 01 10 29 10 32 01 'ip2mkdev'; eval "$shar_touch") &&
- chmod 0755 'ip2mkdev' ||
- $echo 'restore of' 'ip2mkdev' 'failed'
- if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \
- && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then
- md5sum -c << SHAR_EOF >/dev/null 2>&1 \
- || $echo 'ip2mkdev:' 'MD5 check failed'
-cb5717134509f38bad9fde6b1f79b4a4 ip2mkdev
-SHAR_EOF
- else
- shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'ip2mkdev'`"
- test 4251 -eq "$shar_count" ||
- $echo 'ip2mkdev:' 'original size' '4251,' 'current size' "$shar_count!"
- fi
-fi
-rm -fr _sh17581
-exit 0
diff --git a/Makefile b/Makefile
index 371ce8899f5..0f66f146d57 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 6
SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*
diff --git a/arch/alpha/kernel/srmcons.c b/arch/alpha/kernel/srmcons.c
index 3ea809430ed..5d5865204a1 100644
--- a/arch/alpha/kernel/srmcons.c
+++ b/arch/alpha/kernel/srmcons.c
@@ -223,6 +223,7 @@ srmcons_init(void)
driver->subtype = SYSTEM_TYPE_SYSCONS;
driver->init_termios = tty_std_termios;
tty_set_operations(driver, &srmcons_ops);
+ tty_port_link_device(&srmcons_singleton.port, driver, 0);
err = tty_register_driver(driver);
if (err) {
put_tty_driver(driver);
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 93d2fab25b3..de325f4615b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -6,7 +6,7 @@ config ARM
select HAVE_DMA_API_DEBUG
select HAVE_IDE if PCI || ISA || PCMCIA
select HAVE_DMA_ATTRS
- select HAVE_DMA_CONTIGUOUS if (CPU_V6 || CPU_V6K || CPU_V7)
+ select HAVE_DMA_CONTIGUOUS if MMU
select HAVE_MEMBLOCK
select RTC_LIB
select SYS_SUPPORTS_APM_EMULATION
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index a9af4db7234..c634f87e230 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -17,4 +17,64 @@
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
+
+ ocp {
+ uart1: serial@44e09000 {
+ status = "okay";
+ };
+
+ i2c1: i2c@44e0b000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps: tps@24 {
+ reg = <0x24>;
+ };
+
+ };
+ };
+};
+
+/include/ "tps65217.dtsi"
+
+&tps {
+ regulators {
+ dcdc1_reg: regulator@0 {
+ regulator-always-on;
+ };
+
+ dcdc2_reg: regulator@1 {
+ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1325000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc3_reg: regulator@2 {
+ /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: regulator@3 {
+ regulator-always-on;
+ };
+
+ ldo2_reg: regulator@4 {
+ regulator-always-on;
+ };
+
+ ldo3_reg: regulator@5 {
+ regulator-always-on;
+ };
+
+ ldo4_reg: regulator@6 {
+ regulator-always-on;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index d6a97d9eff7..185d6325a45 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -17,4 +17,104 @@
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
+
+ ocp {
+ uart1: serial@44e09000 {
+ status = "okay";
+ };
+
+ i2c1: i2c@44e0b000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps: tps@2d {
+ reg = <0x2d>;
+ };
+ };
+ };
+
+ vbat: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+};
+
+/include/ "tps65910.dtsi"
+
+&tps {
+ vcc1-supply = <&vbat>;
+ vcc2-supply = <&vbat>;
+ vcc3-supply = <&vbat>;
+ vcc4-supply = <&vbat>;
+ vcc5-supply = <&vbat>;
+ vcc6-supply = <&vbat>;
+ vcc7-supply = <&vbat>;
+ vccio-supply = <&vbat>;
+
+ regulators {
+ vrtc_reg: regulator@0 {
+ regulator-always-on;
+ };
+
+ vio_reg: regulator@1 {
+ regulator-always-on;
+ };
+
+ vdd1_reg: regulator@2 {
+ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1312500>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd2_reg: regulator@3 {
+ /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd3_reg: regulator@4 {
+ regulator-always-on;
+ };
+
+ vdig1_reg: regulator@5 {
+ regulator-always-on;
+ };
+
+ vdig2_reg: regulator@6 {
+ regulator-always-on;
+ };
+
+ vpll_reg: regulator@7 {
+ regulator-always-on;
+ };
+
+ vdac_reg: regulator@8 {
+ regulator-always-on;
+ };
+
+ vaux1_reg: regulator@9 {
+ regulator-always-on;
+ };
+
+ vaux2_reg: regulator@10 {
+ regulator-always-on;
+ };
+
+ vaux33_reg: regulator@11 {
+ regulator-always-on;
+ };
+
+ vmmc_reg: regulator@12 {
+ regulator-always-on;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index bd0cff3f808..bb31bff0199 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -69,95 +69,146 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
+ reg = <0x44e07000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <96>;
};
- gpio2: gpio@4804C000 {
+ gpio2: gpio@4804c000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio2";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
+ reg = <0x4804c000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <98>;
};
- gpio3: gpio@481AC000 {
+ gpio3: gpio@481ac000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio3";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
+ reg = <0x481ac000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <32>;
};
- gpio4: gpio@481AE000 {
+ gpio4: gpio@481ae000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio4";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
+ reg = <0x481ae000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <62>;
};
- uart1: serial@44E09000 {
+ uart1: serial@44e09000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart1";
clock-frequency = <48000000>;
+ reg = <0x44e09000 0x2000>;
+ interrupt-parent = <&intc>;
+ interrupts = <72>;
+ status = "disabled";
};
uart2: serial@48022000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart2";
clock-frequency = <48000000>;
+ reg = <0x48022000 0x2000>;
+ interrupt-parent = <&intc>;
+ interrupts = <73>;
+ status = "disabled";
};
uart3: serial@48024000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart3";
clock-frequency = <48000000>;
+ reg = <0x48024000 0x2000>;
+ interrupt-parent = <&intc>;
+ interrupts = <74>;
+ status = "disabled";
};
- uart4: serial@481A6000 {
+ uart4: serial@481a6000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart4";
clock-frequency = <48000000>;
+ reg = <0x481a6000 0x2000>;
+ interrupt-parent = <&intc>;
+ interrupts = <44>;
+ status = "disabled";
};
- uart5: serial@481A8000 {
+ uart5: serial@481a8000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart5";
clock-frequency = <48000000>;
+ reg = <0x481a8000 0x2000>;
+ interrupt-parent = <&intc>;
+ interrupts = <45>;
+ status = "disabled";
};
- uart6: serial@481AA000 {
+ uart6: serial@481aa000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart6";
clock-frequency = <48000000>;
+ reg = <0x481aa000 0x2000>;
+ interrupt-parent = <&intc>;
+ interrupts = <46>;
+ status = "disabled";
};
- i2c1: i2c@44E0B000 {
+ i2c1: i2c@44e0b000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c1";
+ reg = <0x44e0b000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <70>;
+ status = "disabled";
};
- i2c2: i2c@4802A000 {
+ i2c2: i2c@4802a000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c2";
+ reg = <0x4802a000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <71>;
+ status = "disabled";
};
- i2c3: i2c@4819C000 {
+ i2c3: i2c@4819c000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c3";
+ reg = <0x4819c000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <30>;
+ status = "disabled";
};
wdt2: wdt@44e35000 {
compatible = "ti,omap3-wdt";
ti,hwmods = "wd_timer2";
+ reg = <0x44e35000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <91>;
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts
index 7829a4d0cb2..96514c134e5 100644
--- a/arch/arm/boot/dts/at91sam9g25ek.dts
+++ b/arch/arm/boot/dts/at91sam9g25ek.dts
@@ -15,7 +15,7 @@
compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
chosen {
- bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
+ bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
};
ahb {
diff --git a/arch/arm/boot/dts/elpida_ecb240abacn.dtsi b/arch/arm/boot/dts/elpida_ecb240abacn.dtsi
new file mode 100644
index 00000000000..f97f70f8337
--- /dev/null
+++ b/arch/arm/boot/dts/elpida_ecb240abacn.dtsi
@@ -0,0 +1,67 @@
+/*
+ * Common devices used in different OMAP boards
+ */
+
+/ {
+ elpida_ECB240ABACN: lpddr2 {
+ compatible = "Elpida,ECB240ABACN","jedec,lpddr2-s4";
+ density = <2048>;
+ io-width = <32>;
+
+ tRPab-min-tck = <3>;
+ tRCD-min-tck = <3>;
+ tWR-min-tck = <3>;
+ tRASmin-min-tck = <3>;
+ tRRD-min-tck = <2>;
+ tWTR-min-tck = <2>;
+ tXP-min-tck = <2>;
+ tRTP-min-tck = <2>;
+ tCKE-min-tck = <3>;
+ tCKESR-min-tck = <3>;
+ tFAW-min-tck = <8>;
+
+ timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
+ compatible = "jedec,lpddr2-timings";
+ min-freq = <10000000>;
+ max-freq = <400000000>;
+ tRPab = <21000>;
+ tRCD = <18000>;
+ tWR = <15000>;
+ tRAS-min = <42000>;
+ tRRD = <10000>;
+ tWTR = <7500>;
+ tXP = <7500>;
+ tRTP = <7500>;
+ tCKESR = <15000>;
+ tDQSCK-max = <5500>;
+ tFAW = <50000>;
+ tZQCS = <90000>;
+ tZQCL = <360000>;
+ tZQinit = <1000000>;
+ tRAS-max-ns = <70000>;
+ tDQSCK-max-derated = <6000>;
+ };
+
+ timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 {
+ compatible = "jedec,lpddr2-timings";
+ min-freq = <10000000>;
+ max-freq = <200000000>;
+ tRPab = <21000>;
+ tRCD = <18000>;
+ tWR = <15000>;
+ tRAS-min = <42000>;
+ tRRD = <10000>;
+ tWTR = <10000>;
+ tXP = <7500>;
+ tRTP = <7500>;
+ tCKESR = <15000>;
+ tDQSCK-max = <5500>;
+ tFAW = <50000>;
+ tZQCS = <90000>;
+ tZQCL = <360000>;
+ tZQinit = <1000000>;
+ tRAS-max-ns = <70000>;
+ tDQSCK-max-derated = <6000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts
index 25b50b759de..77b84e17c47 100644
--- a/arch/arm/boot/dts/omap2420-h4.dts
+++ b/arch/arm/boot/dts/omap2420-h4.dts
@@ -7,7 +7,7 @@
*/
/dts-v1/;
-/include/ "omap2.dtsi"
+/include/ "omap2420.dtsi"
/ {
model = "TI OMAP2420 H4 board";
diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
new file mode 100644
index 00000000000..bfd76b4a0dd
--- /dev/null
+++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -0,0 +1,48 @@
+/*
+ * Device Tree Source for OMAP2420 SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "omap2.dtsi"
+
+/ {
+ compatible = "ti,omap2420", "ti,omap2";
+
+ ocp {
+ omap2420_pmx: pinmux@48000030 {
+ compatible = "ti,omap2420-padconf", "pinctrl-single";
+ reg = <0x48000030 0x0113>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <8>;
+ pinctrl-single,function-mask = <0x3f>;
+ };
+
+ mcbsp1: mcbsp@48074000 {
+ compatible = "ti,omap2420-mcbsp";
+ reg = <0x48074000 0xff>;
+ reg-names = "mpu";
+ interrupts = <59>, /* TX interrupt */
+ <60>; /* RX interrupt */
+ interrupt-names = "tx", "rx";
+ interrupt-parent = <&intc>;
+ ti,hwmods = "mcbsp1";
+ };
+
+ mcbsp2: mcbsp@48076000 {
+ compatible = "ti,omap2420-mcbsp";
+ reg = <0x48076000 0xff>;
+ reg-names = "mpu";
+ interrupts = <62>, /* TX interrupt */
+ <63>; /* RX interrupt */
+ interrupt-names = "tx", "rx";
+ interrupt-parent = <&intc>;
+ ti,hwmods = "mcbsp2";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
new file mode 100644
index 00000000000..4565d9750f4
--- /dev/null
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -0,0 +1,92 @@
+/*
+ * Device Tree Source for OMAP243x SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "omap2.dtsi"
+
+/ {
+ compatible = "ti,omap2430", "ti,omap2";
+
+ ocp {
+ omap2430_pmx: pinmux@49002030 {
+ compatible = "ti,omap2430-padconf", "pinctrl-single";
+ reg = <0x49002030 0x0154>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <8>;
+ pinctrl-single,function-mask = <0x3f>;
+ };
+
+ mcbsp1: mcbsp@48074000 {
+ compatible = "ti,omap2430-mcbsp";
+ reg = <0x48074000 0xff>;
+ reg-names = "mpu";
+ interrupts = <64>, /* OCP compliant interrupt */
+ <59>, /* TX interrupt */
+ <60>, /* RX interrupt */
+ <61>; /* RX overflow interrupt */
+ interrupt-names = "common", "tx", "rx", "rx_overflow";
+ interrupt-parent = <&intc>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp1";
+ };
+
+ mcbsp2: mcbsp@48076000 {
+ compatible = "ti,omap2430-mcbsp";
+ reg = <0x48076000 0xff>;
+ reg-names = "mpu";
+ interrupts = <16>, /* OCP compliant interrupt */
+ <62>, /* TX interrupt */
+ <63>; /* RX interrupt */
+ interrupt-names = "common", "tx", "rx";
+ interrupt-parent = <&intc>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp2";
+ };
+
+ mcbsp3: mcbsp@4808c000 {
+ compatible = "ti,omap2430-mcbsp";
+ reg = <0x4808c000 0xff>;
+ reg-names = "mpu";
+ interrupts = <17>, /* OCP compliant interrupt */
+ <89>, /* TX interrupt */
+ <90>; /* RX interrupt */
+ interrupt-names = "common", "tx", "rx";
+ interrupt-parent = <&intc>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp3";
+ };
+
+ mcbsp4: mcbsp@4808e000 {
+ compatible = "ti,omap2430-mcbsp";
+ reg = <0x4808e000 0xff>;
+ reg-names = "mpu";
+ interrupts = <18>, /* OCP compliant interrupt */
+ <54>, /* TX interrupt */
+ <55>; /* RX interrupt */
+ interrupt-names = "common", "tx", "rx";
+ interrupt-parent = <&intc>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp4";
+ };
+
+ mcbsp5: mcbsp@48096000 {
+ compatible = "ti,omap2430-mcbsp";
+ reg = <0x48096000 0xff>;
+ reg-names = "mpu";
+ interrupts = <19>, /* OCP compliant interrupt */
+ <81>, /* TX interrupt */
+ <82>; /* RX interrupt */
+ interrupt-names = "common", "tx", "rx";
+ interrupt-parent = <&intc>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp5";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index cdcb98c7e07..c38cf76df81 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -7,16 +7,44 @@
*/
/dts-v1/;
-/include/ "omap3.dtsi"
+/include/ "omap36xx.dtsi"
/ {
- model = "TI OMAP3 BeagleBoard";
- compatible = "ti,omap3-beagle", "ti,omap3";
+ model = "TI OMAP3 BeagleBoard xM";
+ compatible = "ti,omap3-beagle-xm, ti,omap3-beagle", "ti,omap3";
memory {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB */
};
+
+ leds {
+ compatible = "gpio-leds";
+ pmu_stat {
+ label = "beagleboard::pmu_stat";
+ gpios = <&twl_gpio 19 0>; /* LEDB */
+ };
+
+ heartbeat {
+ label = "beagleboard::usr0";
+ gpios = <&gpio5 22 0>; /* 150 -> D6 LED */
+ linux,default-trigger = "heartbeat";
+ };
+
+ mmc {
+ label = "beagleboard::usr1";
+ gpios = <&gpio5 21 0>; /* 149 -> D7 LED */
+ linux,default-trigger = "mmc0";
+ };
+ };
+
+ sound {
+ compatible = "ti,omap-twl4030";
+ ti,model = "omap3beagle";
+
+ ti,mcbsp = <&mcbsp2>;
+ ti,codec = <&twl_audio>;
+ };
};
&i2c1 {
@@ -27,11 +55,17 @@
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
interrupt-parent = <&intc>;
- vsim: regulator@10 {
+ vsim: regulator-vsim {
compatible = "ti,twl4030-vsim";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3000000>;
};
+
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+ codec {
+ };
+ };
};
};
@@ -67,3 +101,15 @@
&mmc3 {
status = "disabled";
};
+
+&twl_gpio {
+ ti,use-leds;
+ /* pullups: BIT(1) */
+ ti,pullups = <0x000002>;
+ /*
+ * pulldowns:
+ * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
+ * BIT(15), BIT(16), BIT(17)
+ */
+ ti,pulldowns = <0x03a1c4>;
+};
diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts
index f349ee9182c..e8ba1c247a3 100644
--- a/arch/arm/boot/dts/omap3-evm.dts
+++ b/arch/arm/boot/dts/omap3-evm.dts
@@ -17,6 +17,15 @@
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
+
+ leds {
+ compatible = "gpio-leds";
+ ledb {
+ label = "omap3evm::ledb";
+ gpios = <&twl_gpio 19 0>; /* LEDB */
+ linux,default-trigger = "default-on";
+ };
+ };
};
&i2c1 {
@@ -46,3 +55,7 @@
reg = <0x5c>;
};
};
+
+&twl_gpio {
+ ti,use-leds;
+};
diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi
new file mode 100644
index 00000000000..89808ce0167
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo.dtsi
@@ -0,0 +1,57 @@
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * The Gumstix Overo must be combined with an expansion board.
+ */
+/dts-v1/;
+
+/include/ "omap3.dtsi"
+
+/ {
+ leds {
+ compatible = "gpio-leds";
+ overo {
+ label = "overo:blue:COM";
+ gpios = <&twl_gpio 19 0>;
+ linux,default-trigger = "mmc0";
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+ };
+};
+
+/include/ "twl4030.dtsi"
+
+/* i2c2 pins are used for gpio */
+&i2c2 {
+ status = "disabled";
+};
+
+/* on board microSD slot */
+&mmc1 {
+ vmmc-supply = <&vmmc1>;
+ bus-width = <4>;
+};
+
+/* optional on board WiFi */
+&mmc2 {
+ bus-width = <4>;
+};
+
+&twl_gpio {
+ ti,use-leds;
+};
diff --git a/arch/arm/boot/dts/omap3-tobi.dts b/arch/arm/boot/dts/omap3-tobi.dts
new file mode 100644
index 00000000000..a13d12de77f
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-tobi.dts
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Tobi expansion board is manufactured by Gumstix Inc.
+ */
+
+/include/ "omap3-overo.dtsi"
+
+/ {
+ model = "TI OMAP3 Gumstix Overo on Tobi";
+ compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3";
+
+ leds {
+ compatible = "gpio-leds";
+ heartbeat {
+ label = "overo:red:gpio21";
+ gpios = <&gpio1 21 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+};
+
+&mmc3 {
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 81094719820..f38ea8771b4 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -17,7 +17,6 @@
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
- serial3 = &uart4;
};
cpus {
@@ -69,6 +68,24 @@
reg = <0x48200000 0x1000>;
};
+ omap3_pmx_core: pinmux@48002030 {
+ compatible = "ti,omap3-padconf", "pinctrl-single";
+ reg = <0x48002030 0x05cc>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0x7fff>;
+ };
+
+ omap3_pmx_wkup: pinmux@0x48002a58 {
+ compatible = "ti,omap3-padconf", "pinctrl-single";
+ reg = <0x48002a58 0x5c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0x7fff>;
+ };
+
gpio1: gpio@48310000 {
compatible = "ti,omap3-gpio";
ti,hwmods = "gpio1";
@@ -141,12 +158,6 @@
clock-frequency = <48000000>;
};
- uart4: serial@49042000 {
- compatible = "ti,omap3-uart";
- ti,hwmods = "uart4";
- clock-frequency = <48000000>;
- };
-
i2c1: i2c@48070000 {
compatible = "ti,omap3-i2c";
#address-cells = <1>;
@@ -220,5 +231,74 @@
compatible = "ti,omap3-wdt";
ti,hwmods = "wd_timer2";
};
+
+ mcbsp1: mcbsp@48074000 {
+ compatible = "ti,omap3-mcbsp";
+ reg = <0x48074000 0xff>;
+ reg-names = "mpu";
+ interrupts = <16>, /* OCP compliant interrupt */
+ <59>, /* TX interrupt */
+ <60>; /* RX interrupt */
+ interrupt-names = "common", "tx", "rx";
+ interrupt-parent = <&intc>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp1";
+ };
+
+ mcbsp2: mcbsp@49022000 {
+ compatible = "ti,omap3-mcbsp";
+ reg = <0x49022000 0xff>,
+ <0x49028000 0xff>;
+ reg-names = "mpu", "sidetone";
+ interrupts = <17>, /* OCP compliant interrupt */
+ <62>, /* TX interrupt */
+ <63>, /* RX interrupt */
+ <4>; /* Sidetone */
+ interrupt-names = "common", "tx", "rx", "sidetone";
+ interrupt-parent = <&intc>;
+ ti,buffer-size = <1280>;
+ ti,hwmods = "mcbsp2";
+ };
+
+ mcbsp3: mcbsp@49024000 {
+ compatible = "ti,omap3-mcbsp";
+ reg = <0x49024000 0xff>,
+ <0x4902a000 0xff>;
+ reg-names = "mpu", "sidetone";
+ interrupts = <22>, /* OCP compliant interrupt */
+ <89>, /* TX interrupt */
+ <90>, /* RX interrupt */
+ <5>; /* Sidetone */
+ interrupt-names = "common", "tx", "rx", "sidetone";
+ interrupt-parent = <&intc>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp3";
+ };
+
+ mcbsp4: mcbsp@49026000 {
+ compatible = "ti,omap3-mcbsp";
+ reg = <0x49026000 0xff>;
+ reg-names = "mpu";
+ interrupts = <23>, /* OCP compliant interrupt */
+ <54>, /* TX interrupt */
+ <55>; /* RX interrupt */
+ interrupt-names = "common", "tx", "rx";
+ interrupt-parent = <&intc>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp4";
+ };
+
+ mcbsp5: mcbsp@48096000 {
+ compatible = "ti,omap3-mcbsp";
+ reg = <0x48096000 0xff>;
+ reg-names = "mpu";
+ interrupts = <27>, /* OCP compliant interrupt */
+ <81>, /* TX interrupt */
+ <82>; /* RX interrupt */
+ interrupt-names = "common", "tx", "rx";
+ interrupt-parent = <&intc>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp5";
+ };
};
};
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
new file mode 100644
index 00000000000..96bf0287cb9
--- /dev/null
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -0,0 +1,25 @@
+/*
+ * Device Tree Source for OMAP3 SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "omap3.dtsi"
+
+/ {
+ aliases {
+ serial3 = &uart4;
+ };
+
+ ocp {
+ uart4: serial@49042000 {
+ compatible = "ti,omap3-uart";
+ ti,hwmods = "uart4";
+ clock-frequency = <48000000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
index 9880c12877b..20b966ee1bb 100644
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -8,6 +8,7 @@
/dts-v1/;
/include/ "omap4.dtsi"
+/include/ "elpida_ecb240abacn.dtsi"
/ {
model = "TI OMAP4 PandaBoard";
@@ -126,3 +127,13 @@
ti,non-removable;
bus-width = <4>;
};
+
+&emif1 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+};
+
+&emif2 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 72216e932fc..94a23b39033 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -8,6 +8,7 @@
/dts-v1/;
/include/ "omap4.dtsi"
+/include/ "elpida_ecb240abacn.dtsi"
/ {
model = "TI OMAP4 SDP board";
@@ -18,7 +19,7 @@
reg = <0x80000000 0x40000000>; /* 1 GB */
};
- vdd_eth: fixedregulator@0 {
+ vdd_eth: fixedregulator-vdd-eth {
compatible = "regulator-fixed";
regulator-name = "VDD_ETH";
regulator-min-microvolt = <3300000>;
@@ -28,7 +29,7 @@
regulator-boot-on;
};
- vbat: fixedregulator@2 {
+ vbat: fixedregulator-vbat {
compatible = "regulator-fixed";
regulator-name = "VBAT";
regulator-min-microvolt = <3750000>;
@@ -115,6 +116,33 @@
};
};
+&omap4_pmx_core {
+ uart2_pins: pinmux_uart2_pins {
+ pinctrl-single,pins = <
+ 0xd8 0x118 /* uart2_cts.uart2_cts INPUT_PULLUP | MODE0 */
+ 0xda 0 /* uart2_rts.uart2_rts OUTPUT | MODE0 */
+ 0xdc 0x118 /* uart2_rx.uart2_rx INPUT_PULLUP | MODE0 */
+ 0xde 0 /* uart2_tx.uart2_tx OUTPUT | MODE0 */
+ >;
+ };
+
+ uart3_pins: pinmux_uart3_pins {
+ pinctrl-single,pins = <
+ 0x100 0x118 /* uart3_cts_rctx.uart3_cts_rctx INPUT_PULLUP | MODE0 */
+ 0x102 0 /* uart3_rts_sd.uart3_rts_sd OUTPUT | MODE0 */
+ 0x104 0x100 /* uart3_rx_irrx.uart3_rx_irrx INPUT | MODE0 */
+ 0x106 0 /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
+ >;
+ };
+
+ uart4_pins: pinmux_uart4_pins {
+ pinctrl-single,pins = <
+ 0x11c 0x100 /* uart4_rx.uart4_rx INPUT | MODE0 */
+ 0x11e 0 /* uart4_tx.uart4_tx OUTPUT | MODE0 */
+ >;
+ };
+};
+
&i2c1 {
clock-frequency = <400000>;
@@ -226,3 +254,98 @@
bus-width = <4>;
ti,non-removable;
};
+
+&emif1 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+};
+
+&emif2 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+};
+
+&keypad {
+ keypad,num-rows = <8>;
+ keypad,num-columns = <8>;
+ linux,keymap = <0x00000012 /* KEY_E */
+ 0x00010013 /* KEY_R */
+ 0x00020014 /* KEY_T */
+ 0x00030066 /* KEY_HOME */
+ 0x0004003f /* KEY_F5 */
+ 0x000500f0 /* KEY_UNKNOWN */
+ 0x00060017 /* KEY_I */
+ 0x0007002a /* KEY_LEFTSHIFT */
+ 0x01000020 /* KEY_D*/
+ 0x01010021 /* KEY_F */
+ 0x01020022 /* KEY_G */
+ 0x010300e7 /* KEY_SEND */
+ 0x01040040 /* KEY_F6 */
+ 0x010500f0 /* KEY_UNKNOWN */
+ 0x01060025 /* KEY_K */
+ 0x0107001c /* KEY_ENTER */
+ 0x0200002d /* KEY_X */
+ 0x0201002e /* KEY_C */
+ 0x0202002f /* KEY_V */
+ 0x0203006b /* KEY_END */
+ 0x02040041 /* KEY_F7 */
+ 0x020500f0 /* KEY_UNKNOWN */
+ 0x02060034 /* KEY_DOT */
+ 0x0207003a /* KEY_CAPSLOCK */
+ 0x0300002c /* KEY_Z */
+ 0x0301004e /* KEY_KPLUS */
+ 0x03020030 /* KEY_B */
+ 0x0303003b /* KEY_F1 */
+ 0x03040042 /* KEY_F8 */
+ 0x030500f0 /* KEY_UNKNOWN */
+ 0x03060018 /* KEY_O */
+ 0x03070039 /* KEY_SPACE */
+ 0x04000011 /* KEY_W */
+ 0x04010015 /* KEY_Y */
+ 0x04020016 /* KEY_U */
+ 0x0403003c /* KEY_F2 */
+ 0x04040073 /* KEY_VOLUMEUP */
+ 0x040500f0 /* KEY_UNKNOWN */
+ 0x04060026 /* KEY_L */
+ 0x04070069 /* KEY_LEFT */
+ 0x0500001f /* KEY_S */
+ 0x05010023 /* KEY_H */
+ 0x05020024 /* KEY_J */
+ 0x0503003d /* KEY_F3 */
+ 0x05040043 /* KEY_F9 */
+ 0x05050072 /* KEY_VOLUMEDOWN */
+ 0x05060032 /* KEY_M */
+ 0x0507006a /* KEY_RIGHT */
+ 0x06000010 /* KEY_Q */
+ 0x0601001e /* KEY_A */
+ 0x06020031 /* KEY_N */
+ 0x0603009e /* KEY_BACK */
+ 0x0604000e /* KEY_BACKSPACE */
+ 0x060500f0 /* KEY_UNKNOWN */
+ 0x06060019 /* KEY_P */
+ 0x06070067 /* KEY_UP */
+ 0x07000094 /* KEY_PROG1 */
+ 0x07010095 /* KEY_PROG2 */
+ 0x070200ca /* KEY_PROG3 */
+ 0x070300cb /* KEY_PROG4 */
+ 0x0704003e /* KEY_F4 */
+ 0x070500f0 /* KEY_UNKNOWN */
+ 0x07060160 /* KEY_OK */
+ 0x0707006c>; /* KEY_DOWN */
+ linux,input-no-autorepeat;
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins>;
+};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 04cbbcb6ff9..5d1c48459e6 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -30,12 +30,35 @@
cpus {
cpu@0 {
compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
};
cpu@1 {
compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
};
};
+ gic: interrupt-controller@48241000 {
+ compatible = "arm,cortex-a9-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x48241000 0x1000>,
+ <0x48240100 0x0100>;
+ };
+
+ L2: l2-cache-controller@48242000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x48242000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ local-timer@0x48240600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x48240600 0x20>;
+ interrupts = <1 13 0x304>;
+ };
+
/*
* The soc node represents the soc top level view. It is uses for IPs
* that are not memory mapped in the MPU view or for the MPU itself.
@@ -61,30 +84,6 @@
/*
* XXX: Use a flat representation of the OMAP4 interconnect.
* The real OMAP interconnect network is quite complex.
- *
- * MPU -+-- MPU_PRIVATE - GIC, L2
- * |
- * +----------------+----------+
- * | | |
- * + +- EMIF - DDR |
- * | | |
- * | + +--------+
- * | | |
- * | +- L4_ABE - AESS, MCBSP, TIMERs...
- * | |
- * +- L3_MAIN --+- L4_CORE - IPs...
- * |
- * +- L4_PER - IPs...
- * |
- * +- L4_CFG -+- L4_WKUP - IPs...
- * | |
- * | +- IPs...
- * +- IPU ----+
- * | |
- * +- DSP ----+
- * | |
- * +- DSS ----+
- *
* Since that will not bring real advantage to represent that in DT for
* the moment, just use a fake OCP bus entry to represent the whole bus
* hierarchy.
@@ -96,16 +95,27 @@
ranges;
ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
- gic: interrupt-controller@48241000 {
- compatible = "arm,cortex-a9-gic";
- interrupt-controller;
- #interrupt-cells = <3>;
- reg = <0x48241000 0x1000>,
- <0x48240100 0x0100>;
+ omap4_pmx_core: pinmux@4a100040 {
+ compatible = "ti,omap4-padconf", "pinctrl-single";
+ reg = <0x4a100040 0x0196>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0x7fff>;
+ };
+ omap4_pmx_wkup: pinmux@4a31e040 {
+ compatible = "ti,omap4-padconf", "pinctrl-single";
+ reg = <0x4a31e040 0x0038>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0x7fff>;
};
gpio1: gpio@4a310000 {
compatible = "ti,omap4-gpio";
+ reg = <0x4a310000 0x200>;
+ interrupts = <0 29 0x4>;
ti,hwmods = "gpio1";
gpio-controller;
#gpio-cells = <2>;
@@ -115,6 +125,8 @@
gpio2: gpio@48055000 {
compatible = "ti,omap4-gpio";
+ reg = <0x48055000 0x200>;
+ interrupts = <0 30 0x4>;
ti,hwmods = "gpio2";
gpio-controller;
#gpio-cells = <2>;
@@ -124,6 +136,8 @@
gpio3: gpio@48057000 {
compatible = "ti,omap4-gpio";
+ reg = <0x48057000 0x200>;
+ interrupts = <0 31 0x4>;
ti,hwmods = "gpio3";
gpio-controller;
#gpio-cells = <2>;
@@ -133,6 +147,8 @@
gpio4: gpio@48059000 {
compatible = "ti,omap4-gpio";
+ reg = <0x48059000 0x200>;
+ interrupts = <0 32 0x4>;
ti,hwmods = "gpio4";
gpio-controller;
#gpio-cells = <2>;
@@ -142,6 +158,8 @@
gpio5: gpio@4805b000 {
compatible = "ti,omap4-gpio";
+ reg = <0x4805b000 0x200>;
+ interrupts = <0 33 0x4>;
ti,hwmods = "gpio5";
gpio-controller;
#gpio-cells = <2>;
@@ -151,6 +169,8 @@
gpio6: gpio@4805d000 {
compatible = "ti,omap4-gpio";
+ reg = <0x4805d000 0x200>;
+ interrupts = <0 34 0x4>;
ti,hwmods = "gpio6";
gpio-controller;
#gpio-cells = <2>;
@@ -160,30 +180,40 @@
uart1: serial@4806a000 {
compatible = "ti,omap4-uart";
+ reg = <0x4806a000 0x100>;
+ interrupts = <0 72 0x4>;
ti,hwmods = "uart1";
clock-frequency = <48000000>;
};
uart2: serial@4806c000 {
compatible = "ti,omap4-uart";
+ reg = <0x4806c000 0x100>;
+ interrupts = <0 73 0x4>;
ti,hwmods = "uart2";
clock-frequency = <48000000>;
};
uart3: serial@48020000 {
compatible = "ti,omap4-uart";
+ reg = <0x48020000 0x100>;
+ interrupts = <0 74 0x4>;
ti,hwmods = "uart3";
clock-frequency = <48000000>;
};
uart4: serial@4806e000 {
compatible = "ti,omap4-uart";
+ reg = <0x4806e000 0x100>;
+ interrupts = <0 70 0x4>;
ti,hwmods = "uart4";
clock-frequency = <48000000>;
};
i2c1: i2c@48070000 {
compatible = "ti,omap4-i2c";
+ reg = <0x48070000 0x100>;
+ interrupts = <0 56 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c1";
@@ -191,6 +221,8 @@
i2c2: i2c@48072000 {
compatible = "ti,omap4-i2c";
+ reg = <0x48072000 0x100>;
+ interrupts = <0 57 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c2";
@@ -198,6 +230,8 @@
i2c3: i2c@48060000 {
compatible = "ti,omap4-i2c";
+ reg = <0x48060000 0x100>;
+ interrupts = <0 61 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c3";
@@ -205,6 +239,8 @@
i2c4: i2c@48350000 {
compatible = "ti,omap4-i2c";
+ reg = <0x48350000 0x100>;
+ interrupts = <0 62 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c4";
@@ -212,6 +248,8 @@
mcspi1: spi@48098000 {
compatible = "ti,omap4-mcspi";
+ reg = <0x48098000 0x200>;
+ interrupts = <0 65 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi1";
@@ -220,6 +258,8 @@
mcspi2: spi@4809a000 {
compatible = "ti,omap4-mcspi";
+ reg = <0x4809a000 0x200>;
+ interrupts = <0 66 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi2";
@@ -228,6 +268,8 @@
mcspi3: spi@480b8000 {
compatible = "ti,omap4-mcspi";
+ reg = <0x480b8000 0x200>;
+ interrupts = <0 91 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi3";
@@ -236,6 +278,8 @@
mcspi4: spi@480ba000 {
compatible = "ti,omap4-mcspi";
+ reg = <0x480ba000 0x200>;
+ interrupts = <0 48 0x4>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi4";
@@ -244,6 +288,8 @@
mmc1: mmc@4809c000 {
compatible = "ti,omap4-hsmmc";
+ reg = <0x4809c000 0x400>;
+ interrupts = <0 83 0x4>;
ti,hwmods = "mmc1";
ti,dual-volt;
ti,needs-special-reset;
@@ -251,30 +297,40 @@
mmc2: mmc@480b4000 {
compatible = "ti,omap4-hsmmc";
+ reg = <0x480b4000 0x400>;
+ interrupts = <0 86 0x4>;
ti,hwmods = "mmc2";
ti,needs-special-reset;
};
mmc3: mmc@480ad000 {
compatible = "ti,omap4-hsmmc";
+ reg = <0x480ad000 0x400>;
+ interrupts = <0 94 0x4>;
ti,hwmods = "mmc3";
ti,needs-special-reset;
};
mmc4: mmc@480d1000 {
compatible = "ti,omap4-hsmmc";
+ reg = <0x480d1000 0x400>;
+ interrupts = <0 96 0x4>;
ti,hwmods = "mmc4";
ti,needs-special-reset;
};
mmc5: mmc@480d5000 {
compatible = "ti,omap4-hsmmc";
+ reg = <0x480d5000 0x400>;
+ interrupts = <0 59 0x4>;
ti,hwmods = "mmc5";
ti,needs-special-reset;
};
wdt2: wdt@4a314000 {
compatible = "ti,omap4-wdt", "ti,omap3-wdt";
+ reg = <0x4a314000 0x80>;
+ interrupts = <0 80 0x4>;
ti,hwmods = "wd_timer2";
};
@@ -282,6 +338,7 @@
compatible = "ti,omap4-mcpdm";
reg = <0x40132000 0x7f>, /* MPU private access */
<0x49032000 0x7f>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
interrupts = <0 112 0x4>;
interrupt-parent = <&gic>;
ti,hwmods = "mcpdm";
@@ -291,9 +348,87 @@
compatible = "ti,omap4-dmic";
reg = <0x4012e000 0x7f>, /* MPU private access */
<0x4902e000 0x7f>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
interrupts = <0 114 0x4>;
interrupt-parent = <&gic>;
ti,hwmods = "dmic";
};
+
+ mcbsp1: mcbsp@40122000 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x40122000 0xff>, /* MPU private access */
+ <0x49022000 0xff>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <0 17 0x4>;
+ interrupt-names = "common";
+ interrupt-parent = <&gic>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp1";
+ };
+
+ mcbsp2: mcbsp@40124000 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x40124000 0xff>, /* MPU private access */
+ <0x49024000 0xff>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <0 22 0x4>;
+ interrupt-names = "common";
+ interrupt-parent = <&gic>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp2";
+ };
+
+ mcbsp3: mcbsp@40126000 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x40126000 0xff>, /* MPU private access */
+ <0x49026000 0xff>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <0 23 0x4>;
+ interrupt-names = "common";
+ interrupt-parent = <&gic>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp3";
+ };
+
+ mcbsp4: mcbsp@48096000 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x48096000 0xff>; /* L4 Interconnect */
+ reg-names = "mpu";
+ interrupts = <0 16 0x4>;
+ interrupt-names = "common";
+ interrupt-parent = <&gic>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp4";
+ };
+
+ keypad: keypad@4a31c000 {
+ compatible = "ti,omap4-keypad";
+ reg = <0x4a31c000 0x80>;
+ interrupts = <0 120 0x4>;
+ reg-names = "mpu";
+ ti,hwmods = "kbd";
+ };
+
+ emif1: emif@4c000000 {
+ compatible = "ti,emif-4d";
+ reg = <0x4c000000 0x100>;
+ interrupts = <0 110 0x4>;
+ ti,hwmods = "emif1";
+ phy-type = <1>;
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+ };
+
+ emif2: emif@4d000000 {
+ compatible = "ti,emif-4d";
+ reg = <0x4d000000 0x100>;
+ interrupts = <0 111 0x4>;
+ ti,hwmods = "emif2";
+ phy-type = <1>;
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+ };
};
};
diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts
index 200c39ad1c8..9c41a3f311a 100644
--- a/arch/arm/boot/dts/omap5-evm.dts
+++ b/arch/arm/boot/dts/omap5-evm.dts
@@ -17,4 +17,68 @@
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
+
+ vmmcsd_fixed: fixedregulator-mmcsd {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <4>;
+};
+
+&mmc2 {
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <8>;
+ ti,non-removable;
+};
+
+&mmc3 {
+ bus-width = <4>;
+ ti,non-removable;
+};
+
+&mmc4 {
+ status = "disabled";
+};
+
+&mmc5 {
+ status = "disabled";
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+
+ /* Pressure Sensor */
+ bmp085@77 {
+ compatible = "bosch,bmp085";
+ reg = <0x77>;
+ };
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+
+ /* Temperature Sensor */
+ tmp102@48{
+ compatible = "ti,tmp102";
+ reg = <0x48>;
+ };
+};
+
+&keypad {
+ keypad,num-rows = <8>;
+ keypad,num-columns = <8>;
+ linux,keymap = <0x02020073 /* VOLUP */
+ 0x02030072 /* VOLDOWM */
+ 0x020400e7 /* SEND */
+ 0x02050066 /* HOME */
+ 0x0206006b /* END */
+ 0x020700d9>; /* SEARCH */
+ linux,input-no-autorepeat;
};
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 57e52708374..9ac75b37c99 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -145,6 +145,41 @@
#interrupt-cells = <1>;
};
+ i2c1: i2c@48070000 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c1";
+ };
+
+ i2c2: i2c@48072000 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c2";
+ };
+
+ i2c3: i2c@48060000 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c3";
+ };
+
+ i2c4: i2c@4807A000 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c4";
+ };
+
+ i2c5: i2c@4807C000 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c5";
+ };
+
uart1: serial@4806a000 {
compatible = "ti,omap4-uart";
ti,hwmods = "uart1";
@@ -180,5 +215,97 @@
ti,hwmods = "uart6";
clock-frequency = <48000000>;
};
+
+ mmc1: mmc@4809c000 {
+ compatible = "ti,omap4-hsmmc";
+ ti,hwmods = "mmc1";
+ ti,dual-volt;
+ ti,needs-special-reset;
+ };
+
+ mmc2: mmc@480b4000 {
+ compatible = "ti,omap4-hsmmc";
+ ti,hwmods = "mmc2";
+ ti,needs-special-reset;
+ };
+
+ mmc3: mmc@480ad000 {
+ compatible = "ti,omap4-hsmmc";
+ ti,hwmods = "mmc3";
+ ti,needs-special-reset;
+ };
+
+ mmc4: mmc@480d1000 {
+ compatible = "ti,omap4-hsmmc";
+ ti,hwmods = "mmc4";
+ ti,needs-special-reset;
+ };
+
+ mmc5: mmc@480d5000 {
+ compatible = "ti,omap4-hsmmc";
+ ti,hwmods = "mmc5";
+ ti,needs-special-reset;
+ };
+
+ keypad: keypad@4ae1c000 {
+ compatible = "ti,omap4-keypad";
+ ti,hwmods = "kbd";
+ };
+
+ mcpdm: mcpdm@40132000 {
+ compatible = "ti,omap4-mcpdm";
+ reg = <0x40132000 0x7f>, /* MPU private access */
+ <0x49032000 0x7f>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <0 112 0x4>;
+ interrupt-parent = <&gic>;
+ ti,hwmods = "mcpdm";
+ };
+
+ dmic: dmic@4012e000 {
+ compatible = "ti,omap4-dmic";
+ reg = <0x4012e000 0x7f>, /* MPU private access */
+ <0x4902e000 0x7f>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <0 114 0x4>;
+ interrupt-parent = <&gic>;
+ ti,hwmods = "dmic";
+ };
+
+ mcbsp1: mcbsp@40122000 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x40122000 0xff>, /* MPU private access */
+ <0x49022000 0xff>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <0 17 0x4>;
+ interrupt-names = "common";
+ interrupt-parent = <&gic>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp1";
+ };
+
+ mcbsp2: mcbsp@40124000 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x40124000 0xff>, /* MPU private access */
+ <0x49024000 0xff>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <0 22 0x4>;
+ interrupt-names = "common";
+ interrupt-parent = <&gic>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp2";
+ };
+
+ mcbsp3: mcbsp@40126000 {
+ compatible = "ti,omap4-mcbsp";
+ reg = <0x40126000 0xff>, /* MPU private access */
+ <0x49026000 0xff>; /* L3 Interconnect */
+ reg-names = "mpu", "dma";
+ interrupts = <0 23 0x4>;
+ interrupt-names = "common";
+ interrupt-parent = <&gic>;
+ ti,buffer-size = <128>;
+ ti,hwmods = "mcbsp3";
+ };
};
};
diff --git a/arch/arm/boot/dts/tps65217.dtsi b/arch/arm/boot/dts/tps65217.dtsi
new file mode 100644
index 00000000000..a63272422d7
--- /dev/null
+++ b/arch/arm/boot/dts/tps65217.dtsi
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/tps65217.pdf
+ */
+
+&tps {
+ compatible = "ti,tps65217";
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dcdc1_reg: regulator@0 {
+ reg = <0>;
+ regulator-compatible = "dcdc1";
+ };
+
+ dcdc2_reg: regulator@1 {
+ reg = <1>;
+ regulator-compatible = "dcdc2";
+ };
+
+ dcdc3_reg: regulator@2 {
+ reg = <2>;
+ regulator-compatible = "dcdc3";
+ };
+
+ ldo1_reg: regulator@3 {
+ reg = <3>;
+ regulator-compatible = "ldo1";
+ };
+
+ ldo2_reg: regulator@4 {
+ reg = <4>;
+ regulator-compatible = "ldo2";
+ };
+
+ ldo3_reg: regulator@5 {
+ reg = <5>;
+ regulator-compatible = "ldo3";
+ };
+
+ ldo4_reg: regulator@6 {
+ reg = <6>;
+ regulator-compatible = "ldo4";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/tps65910.dtsi b/arch/arm/boot/dts/tps65910.dtsi
new file mode 100644
index 00000000000..92693a89160
--- /dev/null
+++ b/arch/arm/boot/dts/tps65910.dtsi
@@ -0,0 +1,86 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/tps65910.pdf
+ */
+
+&tps {
+ compatible = "ti,tps65910";
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vrtc_reg: regulator@0 {
+ reg = <0>;
+ regulator-compatible = "vrtc";
+ };
+
+ vio_reg: regulator@1 {
+ reg = <1>;
+ regulator-compatible = "vio";
+ };
+
+ vdd1_reg: regulator@2 {
+ reg = <2>;
+ regulator-compatible = "vdd1";
+ };
+
+ vdd2_reg: regulator@3 {
+ reg = <3>;
+ regulator-compatible = "vdd2";
+ };
+
+ vdd3_reg: regulator@4 {
+ reg = <4>;
+ regulator-compatible = "vdd3";
+ };
+
+ vdig1_reg: regulator@5 {
+ reg = <5>;
+ regulator-compatible = "vdig1";
+ };
+
+ vdig2_reg: regulator@6 {
+ reg = <6>;
+ regulator-compatible = "vdig2";
+ };
+
+ vpll_reg: regulator@7 {
+ reg = <7>;
+ regulator-compatible = "vpll";
+ };
+
+ vdac_reg: regulator@8 {
+ reg = <8>;
+ regulator-compatible = "vdac";
+ };
+
+ vaux1_reg: regulator@9 {
+ reg = <9>;
+ regulator-compatible = "vaux1";
+ };
+
+ vaux2_reg: regulator@10 {
+ reg = <10>;
+ regulator-compatible = "vaux2";
+ };
+
+ vaux33_reg: regulator@11 {
+ reg = <11>;
+ regulator-compatible = "vaux33";
+ };
+
+ vmmc_reg: regulator@12 {
+ reg = <12>;
+ regulator-compatible = "vmmc";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
index 22f4d1394ed..ff000172c93 100644
--- a/arch/arm/boot/dts/twl4030.dtsi
+++ b/arch/arm/boot/dts/twl4030.dtsi
@@ -19,19 +19,19 @@
interrupts = <11>;
};
- vdac: regulator@0 {
+ vdac: regulator-vdac {
compatible = "ti,twl4030-vdac";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- vpll2: regulator@1 {
+ vpll2: regulator-vpll2 {
compatible = "ti,twl4030-vpll2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- vmmc1: regulator@2 {
+ vmmc1: regulator-vmmc1 {
compatible = "ti,twl4030-vmmc1";
regulator-min-microvolt = <1850000>;
regulator-max-microvolt = <3150000>;
diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi
index d351b27d721..123e2c40218 100644
--- a/arch/arm/boot/dts/twl6030.dtsi
+++ b/arch/arm/boot/dts/twl6030.dtsi
@@ -20,70 +20,70 @@
interrupts = <11>;
};
- vaux1: regulator@0 {
+ vaux1: regulator-vaux1 {
compatible = "ti,twl6030-vaux1";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3000000>;
};
- vaux2: regulator@1 {
+ vaux2: regulator-vaux2 {
compatible = "ti,twl6030-vaux2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <2800000>;
};
- vaux3: regulator@2 {
+ vaux3: regulator-vaux3 {
compatible = "ti,twl6030-vaux3";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3000000>;
};
- vmmc: regulator@3 {
+ vmmc: regulator-vmmc {
compatible = "ti,twl6030-vmmc";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3000000>;
};
- vpp: regulator@4 {
+ vpp: regulator-vpp {
compatible = "ti,twl6030-vpp";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2500000>;
};
- vusim: regulator@5 {
+ vusim: regulator-vusim {
compatible = "ti,twl6030-vusim";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <2900000>;
};
- vdac: regulator@6 {
+ vdac: regulator-vdac {
compatible = "ti,twl6030-vdac";
};
- vana: regulator@7 {
+ vana: regulator-vana {
compatible = "ti,twl6030-vana";
};
- vcxio: regulator@8 {
+ vcxio: regulator-vcxio {
compatible = "ti,twl6030-vcxio";
regulator-always-on;
};
- vusb: regulator@9 {
+ vusb: regulator-vusb {
compatible = "ti,twl6030-vusb";
};
- v1v8: regulator@10 {
+ v1v8: regulator-v1v8 {
compatible = "ti,twl6030-v1v8";
regulator-always-on;
};
- v2v1: regulator@11 {
+ v2v1: regulator-v2v1 {
compatible = "ti,twl6030-v2v1";
regulator-always-on;
};
- clk32kg: regulator@12 {
+ clk32kg: regulator-clk32kg {
compatible = "ti,twl6030-clk32kg";
};
};
diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig
index 7d8718468e0..90610c7030f 100644
--- a/arch/arm/configs/armadillo800eva_defconfig
+++ b/arch/arm/configs/armadillo800eva_defconfig
@@ -33,7 +33,7 @@ CONFIG_AEABI=y
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"
+CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw"
CONFIG_CMDLINE_FORCE=y
CONFIG_KEXEC=y
CONFIG_VFP=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index e58edc36b40..62303043db9 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -123,6 +123,7 @@ CONFIG_HW_RANDOM=y
CONFIG_I2C_CHARDEV=y
CONFIG_SPI=y
CONFIG_SPI_OMAP24XX=y
+CONFIG_PINCTRL_SINGLE=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_TWL4030=y
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index 2ae842df455..5c44dcb0987 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -203,6 +203,13 @@ static inline void dma_free_writecombine(struct device *dev, size_t size,
}
/*
+ * This can be called during early boot to increase the size of the atomic
+ * coherent DMA pool above the default value of 256KiB. It must be called
+ * before postcore_initcall.
+ */
+extern void __init init_dma_coherent_pool_size(unsigned long size);
+
+/*
* This can be called during boot to increase the size of the consistent
* DMA region above it's default value of 2MB. It must be called before the
* memory allocator is initialised, i.e. before any core_initcall.
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index 104ca40d8d1..aaa443b48c9 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -197,7 +197,7 @@ void __init at91rm9200_timer_init(void)
at91_st_read(AT91_ST_SR);
/* Make IRQs happen for the system timer */
- setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq);
+ setup_irq(NR_IRQS_LEGACY + AT91_ID_SYS, &at91rm9200_timer_irq);
/* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used
* directly for the clocksource and all clockevents, after adjusting
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 7b9c2ba396e..bce572a530e 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -726,6 +726,8 @@ static struct resource rtt_resources[] = {
.flags = IORESOURCE_MEM,
}, {
.flags = IORESOURCE_MEM,
+ }, {
+ .flags = IORESOURCE_IRQ,
},
};
@@ -744,10 +746,12 @@ static void __init at91_add_device_rtt_rtc(void)
* The second resource is needed:
* GPBR will serve as the storage for RTC time offset
*/
- at91sam9260_rtt_device.num_resources = 2;
+ at91sam9260_rtt_device.num_resources = 3;
rtt_resources[1].start = AT91SAM9260_BASE_GPBR +
4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
rtt_resources[1].end = rtt_resources[1].start + 3;
+ rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
+ rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
}
#else
static void __init at91_add_device_rtt_rtc(void)
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 8df5c1bdff9..bc2590d712d 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -609,6 +609,8 @@ static struct resource rtt_resources[] = {
.flags = IORESOURCE_MEM,
}, {
.flags = IORESOURCE_MEM,
+ }, {
+ .flags = IORESOURCE_IRQ,
}
};
@@ -626,10 +628,12 @@ static void __init at91_add_device_rtt_rtc(void)
* The second resource is needed:
* GPBR will serve as the storage for RTC time offset
*/
- at91sam9261_rtt_device.num_resources = 2;
+ at91sam9261_rtt_device.num_resources = 3;
rtt_resources[1].start = AT91SAM9261_BASE_GPBR +
4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
rtt_resources[1].end = rtt_resources[1].start + 3;
+ rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
+ rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
}
#else
static void __init at91_add_device_rtt_rtc(void)
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index eb6bbf86fb9..9b6ca734f1a 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -990,6 +990,8 @@ static struct resource rtt0_resources[] = {
.flags = IORESOURCE_MEM,
}, {
.flags = IORESOURCE_MEM,
+ }, {
+ .flags = IORESOURCE_IRQ,
}
};
@@ -1006,6 +1008,8 @@ static struct resource rtt1_resources[] = {
.flags = IORESOURCE_MEM,
}, {
.flags = IORESOURCE_MEM,
+ }, {
+ .flags = IORESOURCE_IRQ,
}
};
@@ -1027,14 +1031,14 @@ static void __init at91_add_device_rtt_rtc(void)
* The second resource is needed only for the chosen RTT:
* GPBR will serve as the storage for RTC time offset
*/
- at91sam9263_rtt0_device.num_resources = 2;
+ at91sam9263_rtt0_device.num_resources = 3;
at91sam9263_rtt1_device.num_resources = 1;
pdev = &at91sam9263_rtt0_device;
r = rtt0_resources;
break;
case 1:
at91sam9263_rtt0_device.num_resources = 1;
- at91sam9263_rtt1_device.num_resources = 2;
+ at91sam9263_rtt1_device.num_resources = 3;
pdev = &at91sam9263_rtt1_device;
r = rtt1_resources;
break;
@@ -1047,6 +1051,8 @@ static void __init at91_add_device_rtt_rtc(void)
pdev->name = "rtc-at91sam9";
r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
r[1].end = r[1].start + 3;
+ r[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
+ r[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
}
#else
static void __init at91_add_device_rtt_rtc(void)
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 06073996a38..1b47319ca00 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -1293,6 +1293,8 @@ static struct resource rtt_resources[] = {
.flags = IORESOURCE_MEM,
}, {
.flags = IORESOURCE_MEM,
+ }, {
+ .flags = IORESOURCE_IRQ,
}
};
@@ -1310,10 +1312,12 @@ static void __init at91_add_device_rtt_rtc(void)
* The second resource is needed:
* GPBR will serve as the storage for RTC time offset
*/
- at91sam9g45_rtt_device.num_resources = 2;
+ at91sam9g45_rtt_device.num_resources = 3;
rtt_resources[1].start = AT91SAM9G45_BASE_GPBR +
4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
rtt_resources[1].end = rtt_resources[1].start + 3;
+ rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
+ rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
}
#else
static void __init at91_add_device_rtt_rtc(void)
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index f09fff93217..b3d365dadef 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -688,6 +688,8 @@ static struct resource rtt_resources[] = {
.flags = IORESOURCE_MEM,
}, {
.flags = IORESOURCE_MEM,
+ }, {
+ .flags = IORESOURCE_IRQ,
}
};
@@ -705,10 +707,12 @@ static void __init at91_add_device_rtt_rtc(void)
* The second resource is needed:
* GPBR will serve as the storage for RTC time offset
*/
- at91sam9rl_rtt_device.num_resources = 2;
+ at91sam9rl_rtt_device.num_resources = 3;
rtt_resources[1].start = AT91SAM9RL_BASE_GPBR +
4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
rtt_resources[1].end = rtt_resources[1].start + 3;
+ rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
+ rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
}
#else
static void __init at91_add_device_rtt_rtc(void)
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index de2ec6b8fea..188c82971eb 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -63,6 +63,12 @@ EXPORT_SYMBOL_GPL(at91_pmc_base);
#define cpu_has_300M_plla() (cpu_is_at91sam9g10())
+#define cpu_has_240M_plla() (cpu_is_at91sam9261() \
+ || cpu_is_at91sam9263() \
+ || cpu_is_at91sam9rl())
+
+#define cpu_has_210M_plla() (cpu_is_at91sam9260())
+
#define cpu_has_pllb() (!(cpu_is_at91sam9rl() \
|| cpu_is_at91sam9g45() \
|| cpu_is_at91sam9x5() \
@@ -706,6 +712,12 @@ static int __init at91_pmc_init(unsigned long main_clock)
} else if (cpu_has_800M_plla()) {
if (plla.rate_hz > 800000000)
pll_overclock = true;
+ } else if (cpu_has_240M_plla()) {
+ if (plla.rate_hz > 240000000)
+ pll_overclock = true;
+ } else if (cpu_has_210M_plla()) {
+ if (plla.rate_hz > 210000000)
+ pll_overclock = true;
} else {
if (plla.rate_hz > 209000000)
pll_overclock = true;
diff --git a/arch/arm/mach-gemini/irq.c b/arch/arm/mach-gemini/irq.c
index ca70e5fcc7a..020852d3bdd 100644
--- a/arch/arm/mach-gemini/irq.c
+++ b/arch/arm/mach-gemini/irq.c
@@ -17,6 +17,7 @@
#include <linux/sched.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
+#include <asm/system_misc.h>
#include <mach/hardware.h>
#define IRQ_SOURCE(base_addr) (base_addr + 0x00)
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 3226077735b..1201191d7f1 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -517,6 +517,13 @@ void __init kirkwood_wdt_init(void)
void __init kirkwood_init_early(void)
{
orion_time_set_base(TIMER_VIRT_BASE);
+
+ /*
+ * Some Kirkwood devices allocate their coherent buffers from atomic
+ * context. Increase size of atomic coherent pool to make sure such
+ * the allocations won't fail.
+ */
+ init_dma_coherent_pool_size(SZ_1M);
}
int kirkwood_tclk;
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index d9335937959..be90b7d0e10 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -10,6 +10,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/sizes.h>
#include <linux/platform_device.h>
#include <linux/mtd/partitions.h>
#include <linux/ata_platform.h>
diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
index a051cb8ae57..d2b6acce8fc 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
@@ -18,6 +18,7 @@
#include <plat/board-ams-delta.h>
+#include <mach/irqs.h>
#include <mach/ams-delta-fiq.h>
#include "iomap.h"
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index c53469802c0..6f192c4900b 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -26,6 +26,7 @@
#include <linux/export.h>
#include <linux/omapfb.h>
#include <linux/io.h>
+#include <linux/platform_data/gpio-omap.h>
#include <media/soc_camera.h>
@@ -37,7 +38,6 @@
#include <plat/board-ams-delta.h>
#include <plat/keypad.h>
#include <plat/mux.h>
-#include <plat/board.h>
#include <mach/hardware.h>
#include <mach/ams-delta-fiq.h>
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 6872f3fd400..6d985521a39 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -32,7 +32,6 @@
#include <plat/flash.h>
#include <plat/fpga.h>
#include <plat/keypad.h>
-#include <plat/board.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 6ec385e2b98..04b5fdaff83 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -23,7 +23,6 @@
#include <asm/mach/map.h>
#include <plat/mux.h>
-#include <plat/board.h>
#include <mach/usb.h>
@@ -52,9 +51,6 @@ static struct omap_usb_config generic1610_usb_config __initdata = {
};
#endif
-static struct omap_board_config_kernel generic_config[] __initdata = {
-};
-
static void __init omap_generic_init(void)
{
#ifdef CONFIG_ARCH_OMAP15XX
@@ -76,8 +72,6 @@ static void __init omap_generic_init(void)
}
#endif
- omap_board_config = generic_config;
- omap_board_config_size = ARRAY_SIZE(generic_config);
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
}
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index b3f6e943e66..a5ac352d68d 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -41,8 +41,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <plat/omap7xx.h>
-#include <plat/board.h>
+#include <mach/omap7xx.h>
#include <plat/keypad.h>
#include <plat/mmc.h>
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 2c0ca8fc338..ec01f03d044 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -26,7 +26,6 @@
#include <asm/mach/map.h>
#include <plat/mux.h>
-#include <plat/board.h>
#include <plat/keypad.h>
#include <plat/lcd_mipid.h>
#include <plat/mmc.h>
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 8784705edb6..3b2d9071022 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -39,6 +39,8 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/i2c/tps65010.h>
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/omap1_bl.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 26bcb9defcd..49f8d745ea1 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -28,6 +28,7 @@
#include <linux/interrupt.h>
#include <linux/apm-emulation.h>
#include <linux/omapfb.h>
+#include <linux/platform_data/omap1_bl.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -37,7 +38,6 @@
#include <plat/mux.h>
#include <plat/tc.h>
#include <plat/dma.h>
-#include <plat/board.h>
#include <plat/irda.h>
#include <plat/keypad.h>
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 4d099446dfa..01523cd78e5 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -27,6 +27,7 @@
#include <linux/omapfb.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
+#include <linux/platform_data/omap1_bl.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -37,7 +38,6 @@
#include <plat/mux.h>
#include <plat/dma.h>
#include <plat/tc.h>
-#include <plat/board.h>
#include <plat/irda.h>
#include <plat/keypad.h>
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 355980321c2..a7abce69043 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -30,6 +30,7 @@
#include <linux/omapfb.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
+#include <linux/platform_data/omap1_bl.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -39,7 +40,6 @@
#include <plat/mux.h>
#include <plat/dma.h>
#include <plat/tc.h>
-#include <plat/board.h>
#include <plat/irda.h>
#include <plat/keypad.h>
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 703d55ecffe..277e0bc60a4 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -32,7 +32,6 @@
#include <plat/fpga.h>
#include <plat/flash.h>
#include <plat/keypad.h>
-#include <plat/board.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 8c665bd16ac..2e1fff26a2f 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -38,7 +38,6 @@
#include <plat/dma.h>
#include <plat/irda.h>
#include <plat/tc.h>
-#include <plat/board.h>
#include <plat/keypad.h>
#include <plat/board-sx1.h>
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 3497769eb35..1668af3017d 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -35,7 +35,6 @@
#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/tc.h>
-#include <plat/board.h>
#include <mach/hardware.h>
#include <mach/usb.h>
@@ -155,9 +154,6 @@ static struct omap_usb_config voiceblue_usb_config __initdata = {
.pins[2] = 6,
};
-static struct omap_board_config_kernel voiceblue_config[] = {
-};
-
#define MACHINE_PANICED 1
#define MACHINE_REBOOTING 2
#define MACHINE_REBOOT 4
@@ -275,8 +271,6 @@ static void __init voiceblue_init(void)
voiceblue_smc91x_resources[1].start = gpio_to_irq(8);
voiceblue_smc91x_resources[1].end = gpio_to_irq(8);
platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
- omap_board_config = voiceblue_config;
- omap_board_config_size = ARRAY_SIZE(voiceblue_config);
omap_serial_init();
omap1_usb_init(&voiceblue_usb_config);
omap_register_i2c_bus(1, 100, NULL, 0);
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index c007d80dfb6..6a32b9b0dc3 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -25,7 +25,6 @@
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/clkdev_omap.h>
-#include <plat/board.h>
#include <plat/sram.h> /* for omap_sram_reprogram_clock() */
#include <mach/hardware.h>
@@ -788,7 +787,6 @@ u32 cpu_mask;
int __init omap1_clk_init(void)
{
struct omap_clk *c;
- const struct omap_clock_config *info;
int crystal_type = 0; /* Default 12 MHz */
u32 reg;
@@ -837,12 +835,6 @@ int __init omap1_clk_init(void)
ck_dpll1_p = clk_get(NULL, "ck_dpll1");
ck_ref_p = clk_get(NULL, "ck_ref");
- info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config);
- if (info != NULL) {
- if (!cpu_is_omap15xx())
- crystal_type = info->system_clock_type;
- }
-
if (cpu_is_omap7xx())
ck_ref.rate = 13000000;
if (cpu_is_omap16xx() && crystal_type == 2)
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index fa1fa4deb6a..05fdbd992c7 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -20,12 +20,11 @@
#include <asm/mach/map.h>
#include <plat/tc.h>
-#include <plat/board.h>
#include <plat/mux.h>
#include <plat/dma.h>
#include <plat/mmc.h>
-#include <plat/omap7xx.h>
+#include <mach/omap7xx.h>
#include <mach/camera.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
index 3ef7d52316b..b0b0f0f2745 100644
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@@ -27,7 +27,8 @@
#include <plat/dma.h>
#include <plat/tc.h>
-#include <plat/irqs.h>
+
+#include <mach/irqs.h>
#define OMAP1_DMA_BASE (0xfffed800)
#define OMAP1_LOGICAL_DMA_CH_COUNT 17
diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c
index ebef15e5e7b..98e6f39224a 100644
--- a/arch/arm/mach-omap1/gpio15xx.c
+++ b/arch/arm/mach-omap1/gpio15xx.c
@@ -17,6 +17,7 @@
*/
#include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
#define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE
#define OMAP1510_GPIO_BASE 0xFFFCE000
diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c
index 2a48cd2e175..33f419236b1 100644
--- a/arch/arm/mach-omap1/gpio16xx.c
+++ b/arch/arm/mach-omap1/gpio16xx.c
@@ -17,6 +17,7 @@
*/
#include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
#define OMAP1610_GPIO1_BASE 0xfffbe400
#define OMAP1610_GPIO2_BASE 0xfffbec00
diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c
index acf12b73eac..958ce9acee9 100644
--- a/arch/arm/mach-omap1/gpio7xx.c
+++ b/arch/arm/mach-omap1/gpio7xx.c
@@ -17,6 +17,7 @@
*/
#include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
#define OMAP7XX_GPIO1_BASE 0xfffbc000
#define OMAP7XX_GPIO2_BASE 0xfffbc800
diff --git a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
index 23eed0035ed..adb5e764965 100644
--- a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
+++ b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
@@ -14,8 +14,6 @@
#ifndef __AMS_DELTA_FIQ_H
#define __AMS_DELTA_FIQ_H
-#include <plat/irqs.h>
-
/*
* Interrupt number used for passing control from FIQ to IRQ.
* IRQ12, described as reserved, has been selected.
diff --git a/arch/arm/mach-omap1/include/mach/gpio.h b/arch/arm/mach-omap1/include/mach/gpio.h
index e737706a8fe..ebf86c0f4f4 100644
--- a/arch/arm/mach-omap1/include/mach/gpio.h
+++ b/arch/arm/mach-omap1/include/mach/gpio.h
@@ -1,5 +1,3 @@
/*
* arch/arm/mach-omap1/include/mach/gpio.h
*/
-
-#include <plat/gpio.h>
diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h
index 01e35fa106b..84248d250ad 100644
--- a/arch/arm/mach-omap1/include/mach/hardware.h
+++ b/arch/arm/mach-omap1/include/mach/hardware.h
@@ -1,11 +1,46 @@
/*
* arch/arm/mach-omap1/include/mach/hardware.h
+ *
+ * Hardware definitions for TI OMAP processors and boards
+ *
+ * NOTE: Please put device driver specific defines into a separate header
+ * file for each driver.
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
+ * and Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#ifndef __MACH_HARDWARE_H
-#define __MACH_HARDWARE_H
+#ifndef __ASM_ARCH_OMAP_HARDWARE_H
+#define __ASM_ARCH_OMAP_HARDWARE_H
+#include <asm/sizes.h>
#ifndef __ASSEMBLER__
+#include <asm/types.h>
+#include <plat/cpu.h>
+
/*
* NOTE: Please use ioremap + __raw_read/write where possible instead of these
*/
@@ -35,7 +70,249 @@ static inline u32 omap_cs3_phys(void)
? 0 : OMAP_CS3_PHYS;
}
+#endif /* ifndef __ASSEMBLER__ */
+
+#include <plat/serial.h>
+
+/*
+ * ---------------------------------------------------------------------------
+ * Common definitions for all OMAP processors
+ * NOTE: Put all processor or board specific parts to the special header
+ * files.
+ * ---------------------------------------------------------------------------
+ */
+
+/*
+ * ----------------------------------------------------------------------------
+ * Timers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_MPU_TIMER1_BASE (0xfffec500)
+#define OMAP_MPU_TIMER2_BASE (0xfffec600)
+#define OMAP_MPU_TIMER3_BASE (0xfffec700)
+#define MPU_TIMER_FREE (1 << 6)
+#define MPU_TIMER_CLOCK_ENABLE (1 << 5)
+#define MPU_TIMER_AR (1 << 1)
+#define MPU_TIMER_ST (1 << 0)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Clocks
+ * ----------------------------------------------------------------------------
+ */
+#define CLKGEN_REG_BASE (0xfffece00)
+#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0)
+#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4)
+#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8)
+#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC)
+#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10)
+#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14)
+#define ARM_SYSST (CLKGEN_REG_BASE + 0x18)
+#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24)
+
+#define CK_RATEF 1
+#define CK_IDLEF 2
+#define CK_ENABLEF 4
+#define CK_SELECTF 8
+#define SETARM_IDLE_SHIFT
+
+/* DPLL control registers */
+#define DPLL_CTL (0xfffecf00)
+
+/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
+#define DSP_CONFIG_REG_BASE IOMEM(0xe1008000)
+#define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0)
+#define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4)
+#define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8)
+#define DSP_RSTCT2 (DSP_CONFIG_REG_BASE + 0x14)
+
+/*
+ * ---------------------------------------------------------------------------
+ * UPLD
+ * ---------------------------------------------------------------------------
+ */
+#define ULPD_REG_BASE (0xfffe0800)
+#define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14)
+#define ULPD_SETUP_ANALOG_CELL_3 (ULPD_REG_BASE + 0x24)
+#define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30)
+# define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */
+# define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */
+#define ULPD_SOFT_REQ (ULPD_REG_BASE + 0x34)
+# define SOFT_UDC_REQ (1 << 4)
+# define SOFT_USB_CLK_REQ (1 << 3)
+# define SOFT_DPLL_REQ (1 << 0)
+#define ULPD_DPLL_CTRL (ULPD_REG_BASE + 0x3c)
+#define ULPD_STATUS_REQ (ULPD_REG_BASE + 0x40)
+#define ULPD_APLL_CTRL (ULPD_REG_BASE + 0x4c)
+#define ULPD_POWER_CTRL (ULPD_REG_BASE + 0x50)
+#define ULPD_SOFT_DISABLE_REQ_REG (ULPD_REG_BASE + 0x68)
+# define DIS_MMC2_DPLL_REQ (1 << 11)
+# define DIS_MMC1_DPLL_REQ (1 << 10)
+# define DIS_UART3_DPLL_REQ (1 << 9)
+# define DIS_UART2_DPLL_REQ (1 << 8)
+# define DIS_UART1_DPLL_REQ (1 << 7)
+# define DIS_USB_HOST_DPLL_REQ (1 << 6)
+#define ULPD_SDW_CLK_DIV_CTRL_SEL (ULPD_REG_BASE + 0x74)
+#define ULPD_CAM_CLK_CTRL (ULPD_REG_BASE + 0x7c)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Watchdog timer
+ * ---------------------------------------------------------------------------
+ */
+
+/* Watchdog timer within the OMAP3.2 gigacell */
+#define OMAP_MPU_WATCHDOG_BASE (0xfffec800)
+#define OMAP_WDT_TIMER (OMAP_MPU_WATCHDOG_BASE + 0x0)
+#define OMAP_WDT_LOAD_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_READ_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_TIMER_MODE (OMAP_MPU_WATCHDOG_BASE + 0x8)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Interrupts
+ * ---------------------------------------------------------------------------
+ */
+#ifdef CONFIG_ARCH_OMAP1
+
+/*
+ * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
+ * or something similar.. -- PFM.
+ */
+
+#define OMAP_IH1_BASE 0xfffecb00
+#define OMAP_IH2_BASE 0xfffe0000
+
+#define OMAP_IH1_ITR (OMAP_IH1_BASE + 0x00)
+#define OMAP_IH1_MIR (OMAP_IH1_BASE + 0x04)
+#define OMAP_IH1_SIR_IRQ (OMAP_IH1_BASE + 0x10)
+#define OMAP_IH1_SIR_FIQ (OMAP_IH1_BASE + 0x14)
+#define OMAP_IH1_CONTROL (OMAP_IH1_BASE + 0x18)
+#define OMAP_IH1_ILR0 (OMAP_IH1_BASE + 0x1c)
+#define OMAP_IH1_ISR (OMAP_IH1_BASE + 0x9c)
+
+#define OMAP_IH2_ITR (OMAP_IH2_BASE + 0x00)
+#define OMAP_IH2_MIR (OMAP_IH2_BASE + 0x04)
+#define OMAP_IH2_SIR_IRQ (OMAP_IH2_BASE + 0x10)
+#define OMAP_IH2_SIR_FIQ (OMAP_IH2_BASE + 0x14)
+#define OMAP_IH2_CONTROL (OMAP_IH2_BASE + 0x18)
+#define OMAP_IH2_ILR0 (OMAP_IH2_BASE + 0x1c)
+#define OMAP_IH2_ISR (OMAP_IH2_BASE + 0x9c)
+
+#define IRQ_ITR_REG_OFFSET 0x00
+#define IRQ_MIR_REG_OFFSET 0x04
+#define IRQ_SIR_IRQ_REG_OFFSET 0x10
+#define IRQ_SIR_FIQ_REG_OFFSET 0x14
+#define IRQ_CONTROL_REG_OFFSET 0x18
+#define IRQ_ISR_REG_OFFSET 0x9c
+#define IRQ_ILR0_REG_OFFSET 0x1c
+#define IRQ_GMR_REG_OFFSET 0xa0
+
#endif
-#endif
-#include <plat/hardware.h>
+/*
+ * ----------------------------------------------------------------------------
+ * System control registers
+ * ----------------------------------------------------------------------------
+ */
+#define MOD_CONF_CTRL_0 0xfffe1080
+#define MOD_CONF_CTRL_1 0xfffe1110
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pin multiplexing registers
+ * ----------------------------------------------------------------------------
+ */
+#define FUNC_MUX_CTRL_0 0xfffe1000
+#define FUNC_MUX_CTRL_1 0xfffe1004
+#define FUNC_MUX_CTRL_2 0xfffe1008
+#define COMP_MODE_CTRL_0 0xfffe100c
+#define FUNC_MUX_CTRL_3 0xfffe1010
+#define FUNC_MUX_CTRL_4 0xfffe1014
+#define FUNC_MUX_CTRL_5 0xfffe1018
+#define FUNC_MUX_CTRL_6 0xfffe101C
+#define FUNC_MUX_CTRL_7 0xfffe1020
+#define FUNC_MUX_CTRL_8 0xfffe1024
+#define FUNC_MUX_CTRL_9 0xfffe1028
+#define FUNC_MUX_CTRL_A 0xfffe102C
+#define FUNC_MUX_CTRL_B 0xfffe1030
+#define FUNC_MUX_CTRL_C 0xfffe1034
+#define FUNC_MUX_CTRL_D 0xfffe1038
+#define PULL_DWN_CTRL_0 0xfffe1040
+#define PULL_DWN_CTRL_1 0xfffe1044
+#define PULL_DWN_CTRL_2 0xfffe1048
+#define PULL_DWN_CTRL_3 0xfffe104c
+#define PULL_DWN_CTRL_4 0xfffe10ac
+
+/* OMAP-1610 specific multiplexing registers */
+#define FUNC_MUX_CTRL_E 0xfffe1090
+#define FUNC_MUX_CTRL_F 0xfffe1094
+#define FUNC_MUX_CTRL_10 0xfffe1098
+#define FUNC_MUX_CTRL_11 0xfffe109c
+#define FUNC_MUX_CTRL_12 0xfffe10a0
+#define PU_PD_SEL_0 0xfffe10b4
+#define PU_PD_SEL_1 0xfffe10b8
+#define PU_PD_SEL_2 0xfffe10bc
+#define PU_PD_SEL_3 0xfffe10c0
+#define PU_PD_SEL_4 0xfffe10c4
+
+/* Timer32K for 1610 and 1710*/
+#define OMAP_TIMER32K_BASE 0xFFFBC400
+
+/*
+ * ---------------------------------------------------------------------------
+ * TIPB bus interface
+ * ---------------------------------------------------------------------------
+ */
+#define TIPB_PUBLIC_CNTL_BASE 0xfffed300
+#define MPU_PUBLIC_TIPB_CNTL (TIPB_PUBLIC_CNTL_BASE + 0x8)
+#define TIPB_PRIVATE_CNTL_BASE 0xfffeca00
+#define MPU_PRIVATE_TIPB_CNTL (TIPB_PRIVATE_CNTL_BASE + 0x8)
+
+/*
+ * ----------------------------------------------------------------------------
+ * MPUI interface
+ * ----------------------------------------------------------------------------
+ */
+#define MPUI_BASE (0xfffec900)
+#define MPUI_CTRL (MPUI_BASE + 0x0)
+#define MPUI_DEBUG_ADDR (MPUI_BASE + 0x4)
+#define MPUI_DEBUG_DATA (MPUI_BASE + 0x8)
+#define MPUI_DEBUG_FLAG (MPUI_BASE + 0xc)
+#define MPUI_STATUS_REG (MPUI_BASE + 0x10)
+#define MPUI_DSP_STATUS (MPUI_BASE + 0x14)
+#define MPUI_DSP_BOOT_CONFIG (MPUI_BASE + 0x18)
+#define MPUI_DSP_API_CONFIG (MPUI_BASE + 0x1c)
+
+/*
+ * ----------------------------------------------------------------------------
+ * LED Pulse Generator
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_LPG1_BASE 0xfffbd000
+#define OMAP_LPG2_BASE 0xfffbd800
+#define OMAP_LPG1_LCR (OMAP_LPG1_BASE + 0x00)
+#define OMAP_LPG1_PMR (OMAP_LPG1_BASE + 0x04)
+#define OMAP_LPG2_LCR (OMAP_LPG2_BASE + 0x00)
+#define OMAP_LPG2_PMR (OMAP_LPG2_BASE + 0x04)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pulse-Width Light
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_PWL_BASE 0xfffb5800
+#define OMAP_PWL_ENABLE (OMAP_PWL_BASE + 0x00)
+#define OMAP_PWL_CLK_ENABLE (OMAP_PWL_BASE + 0x04)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Processor specific defines
+ * ---------------------------------------------------------------------------
+ */
+
+#include "omap7xx.h"
+#include "omap1510.h"
+#include "omap16xx.h"
+
+#endif /* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/mach-omap1/include/mach/irqs.h b/arch/arm/mach-omap1/include/mach/irqs.h
index 9292fdc1cb0..729992d7d26 100644
--- a/arch/arm/mach-omap1/include/mach/irqs.h
+++ b/arch/arm/mach-omap1/include/mach/irqs.h
@@ -1,5 +1,268 @@
/*
- * arch/arm/mach-omap1/include/mach/irqs.h
+ * arch/arm/plat-omap/include/mach/irqs.h
+ *
+ * Copyright (C) Greg Lonnon 2001
+ * Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
+ * are different.
*/
-#include <plat/irqs.h>
+#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
+#define __ASM_ARCH_OMAP15XX_IRQS_H
+
+/*
+ * IRQ numbers for interrupt handler 1
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ *
+ */
+#define INT_CAMERA 1
+#define INT_FIQ 3
+#define INT_RTDX 6
+#define INT_DSP_MMU_ABORT 7
+#define INT_HOST 8
+#define INT_ABORT 9
+#define INT_BRIDGE_PRIV 13
+#define INT_GPIO_BANK1 14
+#define INT_UART3 15
+#define INT_TIMER3 16
+#define INT_DMA_CH0_6 19
+#define INT_DMA_CH1_7 20
+#define INT_DMA_CH2_8 21
+#define INT_DMA_CH3 22
+#define INT_DMA_CH4 23
+#define INT_DMA_CH5 24
+#define INT_TIMER1 26
+#define INT_WD_TIMER 27
+#define INT_BRIDGE_PUB 28
+#define INT_TIMER2 30
+#define INT_LCD_CTRL 31
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1510_IH2_IRQ 0
+#define INT_1510_RES2 2
+#define INT_1510_SPI_TX 4
+#define INT_1510_SPI_RX 5
+#define INT_1510_DSP_MAILBOX1 10
+#define INT_1510_DSP_MAILBOX2 11
+#define INT_1510_RES12 12
+#define INT_1510_LB_MMU 17
+#define INT_1510_RES18 18
+#define INT_1510_LOCAL_BUS 29
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1610_IH2_IRQ INT_1510_IH2_IRQ
+#define INT_1610_IH2_FIQ 2
+#define INT_1610_McBSP2_TX 4
+#define INT_1610_McBSP2_RX 5
+#define INT_1610_DSP_MAILBOX1 10
+#define INT_1610_DSP_MAILBOX2 11
+#define INT_1610_LCD_LINE 12
+#define INT_1610_GPTIMER1 17
+#define INT_1610_GPTIMER2 18
+#define INT_1610_SSR_FIFO_0 29
+
+/*
+ * OMAP-7xx specific IRQ numbers for interrupt handler 1
+ */
+#define INT_7XX_IH2_FIQ 0
+#define INT_7XX_IH2_IRQ 1
+#define INT_7XX_USB_NON_ISO 2
+#define INT_7XX_USB_ISO 3
+#define INT_7XX_ICR 4
+#define INT_7XX_EAC 5
+#define INT_7XX_GPIO_BANK1 6
+#define INT_7XX_GPIO_BANK2 7
+#define INT_7XX_GPIO_BANK3 8
+#define INT_7XX_McBSP2TX 10
+#define INT_7XX_McBSP2RX 11
+#define INT_7XX_McBSP2RX_OVF 12
+#define INT_7XX_LCD_LINE 14
+#define INT_7XX_GSM_PROTECT 15
+#define INT_7XX_TIMER3 16
+#define INT_7XX_GPIO_BANK5 17
+#define INT_7XX_GPIO_BANK6 18
+#define INT_7XX_SPGIO_WR 29
+
+/*
+ * IRQ numbers for interrupt handler 2
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ */
+#define IH2_BASE 32
+
+#define INT_KEYBOARD (1 + IH2_BASE)
+#define INT_uWireTX (2 + IH2_BASE)
+#define INT_uWireRX (3 + IH2_BASE)
+#define INT_I2C (4 + IH2_BASE)
+#define INT_MPUIO (5 + IH2_BASE)
+#define INT_USB_HHC_1 (6 + IH2_BASE)
+#define INT_McBSP3TX (10 + IH2_BASE)
+#define INT_McBSP3RX (11 + IH2_BASE)
+#define INT_McBSP1TX (12 + IH2_BASE)
+#define INT_McBSP1RX (13 + IH2_BASE)
+#define INT_UART1 (14 + IH2_BASE)
+#define INT_UART2 (15 + IH2_BASE)
+#define INT_BT_MCSI1TX (16 + IH2_BASE)
+#define INT_BT_MCSI1RX (17 + IH2_BASE)
+#define INT_SOSSI_MATCH (19 + IH2_BASE)
+#define INT_USB_W2FC (20 + IH2_BASE)
+#define INT_1WIRE (21 + IH2_BASE)
+#define INT_OS_TIMER (22 + IH2_BASE)
+#define INT_MMC (23 + IH2_BASE)
+#define INT_GAUGE_32K (24 + IH2_BASE)
+#define INT_RTC_TIMER (25 + IH2_BASE)
+#define INT_RTC_ALARM (26 + IH2_BASE)
+#define INT_MEM_STICK (27 + IH2_BASE)
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1510_DSP_MMU (28 + IH2_BASE)
+#define INT_1510_COM_SPI_RO (31 + IH2_BASE)
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1610_FAC (0 + IH2_BASE)
+#define INT_1610_USB_HHC_2 (7 + IH2_BASE)
+#define INT_1610_USB_OTG (8 + IH2_BASE)
+#define INT_1610_SoSSI (9 + IH2_BASE)
+#define INT_1610_SoSSI_MATCH (19 + IH2_BASE)
+#define INT_1610_DSP_MMU (28 + IH2_BASE)
+#define INT_1610_McBSP2RX_OF (31 + IH2_BASE)
+#define INT_1610_STI (32 + IH2_BASE)
+#define INT_1610_STI_WAKEUP (33 + IH2_BASE)
+#define INT_1610_GPTIMER3 (34 + IH2_BASE)
+#define INT_1610_GPTIMER4 (35 + IH2_BASE)
+#define INT_1610_GPTIMER5 (36 + IH2_BASE)
+#define INT_1610_GPTIMER6 (37 + IH2_BASE)
+#define INT_1610_GPTIMER7 (38 + IH2_BASE)
+#define INT_1610_GPTIMER8 (39 + IH2_BASE)
+#define INT_1610_GPIO_BANK2 (40 + IH2_BASE)
+#define INT_1610_GPIO_BANK3 (41 + IH2_BASE)
+#define INT_1610_MMC2 (42 + IH2_BASE)
+#define INT_1610_CF (43 + IH2_BASE)
+#define INT_1610_WAKE_UP_REQ (46 + IH2_BASE)
+#define INT_1610_GPIO_BANK4 (48 + IH2_BASE)
+#define INT_1610_SPI (49 + IH2_BASE)
+#define INT_1610_DMA_CH6 (53 + IH2_BASE)
+#define INT_1610_DMA_CH7 (54 + IH2_BASE)
+#define INT_1610_DMA_CH8 (55 + IH2_BASE)
+#define INT_1610_DMA_CH9 (56 + IH2_BASE)
+#define INT_1610_DMA_CH10 (57 + IH2_BASE)
+#define INT_1610_DMA_CH11 (58 + IH2_BASE)
+#define INT_1610_DMA_CH12 (59 + IH2_BASE)
+#define INT_1610_DMA_CH13 (60 + IH2_BASE)
+#define INT_1610_DMA_CH14 (61 + IH2_BASE)
+#define INT_1610_DMA_CH15 (62 + IH2_BASE)
+#define INT_1610_NAND (63 + IH2_BASE)
+#define INT_1610_SHA1MD5 (91 + IH2_BASE)
+
+/*
+ * OMAP-7xx specific IRQ numbers for interrupt handler 2
+ */
+#define INT_7XX_HW_ERRORS (0 + IH2_BASE)
+#define INT_7XX_NFIQ_PWR_FAIL (1 + IH2_BASE)
+#define INT_7XX_CFCD (2 + IH2_BASE)
+#define INT_7XX_CFIREQ (3 + IH2_BASE)
+#define INT_7XX_I2C (4 + IH2_BASE)
+#define INT_7XX_PCC (5 + IH2_BASE)
+#define INT_7XX_MPU_EXT_NIRQ (6 + IH2_BASE)
+#define INT_7XX_SPI_100K_1 (7 + IH2_BASE)
+#define INT_7XX_SYREN_SPI (8 + IH2_BASE)
+#define INT_7XX_VLYNQ (9 + IH2_BASE)
+#define INT_7XX_GPIO_BANK4 (10 + IH2_BASE)
+#define INT_7XX_McBSP1TX (11 + IH2_BASE)
+#define INT_7XX_McBSP1RX (12 + IH2_BASE)
+#define INT_7XX_McBSP1RX_OF (13 + IH2_BASE)
+#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE)
+#define INT_7XX_UART_MODEM_1 (15 + IH2_BASE)
+#define INT_7XX_MCSI (16 + IH2_BASE)
+#define INT_7XX_uWireTX (17 + IH2_BASE)
+#define INT_7XX_uWireRX (18 + IH2_BASE)
+#define INT_7XX_SMC_CD (19 + IH2_BASE)
+#define INT_7XX_SMC_IREQ (20 + IH2_BASE)
+#define INT_7XX_HDQ_1WIRE (21 + IH2_BASE)
+#define INT_7XX_TIMER32K (22 + IH2_BASE)
+#define INT_7XX_MMC_SDIO (23 + IH2_BASE)
+#define INT_7XX_UPLD (24 + IH2_BASE)
+#define INT_7XX_USB_HHC_1 (27 + IH2_BASE)
+#define INT_7XX_USB_HHC_2 (28 + IH2_BASE)
+#define INT_7XX_USB_GENI (29 + IH2_BASE)
+#define INT_7XX_USB_OTG (30 + IH2_BASE)
+#define INT_7XX_CAMERA_IF (31 + IH2_BASE)
+#define INT_7XX_RNG (32 + IH2_BASE)
+#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE)
+#define INT_7XX_DBB_RF_EN (34 + IH2_BASE)
+#define INT_7XX_MPUIO_KEYPAD (35 + IH2_BASE)
+#define INT_7XX_SHA1_MD5 (36 + IH2_BASE)
+#define INT_7XX_SPI_100K_2 (37 + IH2_BASE)
+#define INT_7XX_RNG_IDLE (38 + IH2_BASE)
+#define INT_7XX_MPUIO (39 + IH2_BASE)
+#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE)
+#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE)
+#define INT_7XX_LLPC_OE_RISING (42 + IH2_BASE)
+#define INT_7XX_LLPC_VSYNC (43 + IH2_BASE)
+#define INT_7XX_WAKE_UP_REQ (46 + IH2_BASE)
+#define INT_7XX_DMA_CH6 (53 + IH2_BASE)
+#define INT_7XX_DMA_CH7 (54 + IH2_BASE)
+#define INT_7XX_DMA_CH8 (55 + IH2_BASE)
+#define INT_7XX_DMA_CH9 (56 + IH2_BASE)
+#define INT_7XX_DMA_CH10 (57 + IH2_BASE)
+#define INT_7XX_DMA_CH11 (58 + IH2_BASE)
+#define INT_7XX_DMA_CH12 (59 + IH2_BASE)
+#define INT_7XX_DMA_CH13 (60 + IH2_BASE)
+#define INT_7XX_DMA_CH14 (61 + IH2_BASE)
+#define INT_7XX_DMA_CH15 (62 + IH2_BASE)
+#define INT_7XX_NAND (63 + IH2_BASE)
+
+/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
+ * 16 MPUIO lines */
+#define OMAP_MAX_GPIO_LINES 192
+#define IH_GPIO_BASE (128 + IH2_BASE)
+#define IH_MPUIO_BASE (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
+#define OMAP_IRQ_END (IH_MPUIO_BASE + 16)
+
+/* External FPGA handles interrupts on Innovator boards */
+#define OMAP_FPGA_IRQ_BASE (OMAP_IRQ_END)
+#ifdef CONFIG_MACH_OMAP_INNOVATOR
+#define OMAP_FPGA_NR_IRQS 24
+#else
+#define OMAP_FPGA_NR_IRQS 0
+#endif
+#define OMAP_FPGA_IRQ_END (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
+
+#define NR_IRQS OMAP_FPGA_IRQ_END
+
+#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32))
+
+#include <mach/hardware.h>
+
+#ifdef CONFIG_FIQ
+#define FIQ_START 1024
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/omap1510.h b/arch/arm/mach-omap1/include/mach/omap1510.h
index d2400466813..8fe05d6137c 100644
--- a/arch/arm/plat-omap/include/plat/omap1510.h
+++ b/arch/arm/mach-omap1/include/mach/omap1510.h
@@ -1,5 +1,4 @@
-/* arch/arm/plat-omap/include/mach/omap1510.h
- *
+/*
* Hardware definitions for TI OMAP1510 processor.
*
* Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
diff --git a/arch/arm/plat-omap/include/plat/omap16xx.h b/arch/arm/mach-omap1/include/mach/omap16xx.h
index e69e1d857b4..cd1c724869c 100644
--- a/arch/arm/plat-omap/include/plat/omap16xx.h
+++ b/arch/arm/mach-omap1/include/mach/omap16xx.h
@@ -1,5 +1,4 @@
-/* arch/arm/plat-omap/include/mach/omap16xx.h
- *
+/*
* Hardware definitions for TI OMAP1610/5912/1710 processors.
*
* Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
diff --git a/arch/arm/plat-omap/include/plat/omap7xx.h b/arch/arm/mach-omap1/include/mach/omap7xx.h
index 48e4757e1e3..63da994bc60 100644
--- a/arch/arm/plat-omap/include/plat/omap7xx.h
+++ b/arch/arm/mach-omap1/include/mach/omap7xx.h
@@ -1,5 +1,4 @@
-/* arch/arm/plat-omap/include/mach/omap7xx.h
- *
+/*
* Hardware definitions for TI OMAP7XX processor.
*
* Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c
index f6b14a14a95..7f4bba9fa02 100644
--- a/arch/arm/mach-omap1/leds-h2p2-debug.c
+++ b/arch/arm/mach-omap1/leds-h2p2-debug.c
@@ -14,6 +14,7 @@
#include <linux/kernel_stat.h>
#include <linux/sched.h>
#include <linux/io.h>
+#include <linux/platform_data/gpio-omap.h>
#include <mach/hardware.h>
#include <asm/leds.h>
diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c
index ae6dd93b8dd..7b1a3833165 100644
--- a/arch/arm/mach-omap1/leds.c
+++ b/arch/arm/mach-omap1/leds.c
@@ -6,6 +6,7 @@
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/platform_data/gpio-omap.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 6809c9e56c9..0d1709b1a6f 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -22,7 +22,6 @@
#include <asm/mach-types.h>
-#include <plat/board.h>
#include <plat/mux.h>
#include <plat/fpga.h>
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index fcd4e85c4dd..c1309495eeb 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -18,6 +18,7 @@ config ARCH_OMAP2PLUS_TYPICAL
select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
select HIGHMEM
+ select PINCTRL
help
Compile a kernel suitable for booting most boards
diff --git a/arch/arm/mach-omap2/Makefile.boot b/arch/arm/mach-omap2/Makefile.boot
index b03e562acc6..be0fe9226d6 100644
--- a/arch/arm/mach-omap2/Makefile.boot
+++ b/arch/arm/mach-omap2/Makefile.boot
@@ -1,3 +1,9 @@
zreladdr-y += 0x80008000
params_phys-y := 0x80000100
initrd_phys-y := 0x80800000
+
+dtb-$(CONFIG_SOC_OMAP2420) += omap2420-h4.dtb
+dtb-$(CONFIG_ARCH_OMAP3) += omap3-beagle-xm.dtb omap3-evm.dtb omap3-tobi.dtb
+dtb-$(CONFIG_ARCH_OMAP4) += omap4-panda.dtb omap4-pandaES.dtb
+dtb-$(CONFIG_ARCH_OMAP4) += omap4-var_som.dtb omap4-sdp.dtb
+dtb-$(CONFIG_SOC_OMAP5) += omap5-evm.dtb
diff --git a/arch/arm/plat-omap/include/plat/am33xx.h b/arch/arm/mach-omap2/am33xx.h
index 06c19bb7bca..06c19bb7bca 100644
--- a/arch/arm/plat-omap/include/plat/am33xx.h
+++ b/arch/arm/mach-omap2/am33xx.h
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 9511584fdc4..0900eac57d5 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -33,7 +33,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/board.h>
#include "common.h"
#include <plat/gpmc.h>
#include <plat/usb.h>
@@ -212,9 +211,6 @@ static struct regulator_init_data sdp2430_vmmc1 = {
};
static struct twl4030_gpio_platform_data sdp2430_gpio_data = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
};
static struct twl4030_platform_data sdp2430_twldata = {
@@ -235,7 +231,7 @@ static int __init omap2430_i2c_init(void)
sdp2430_i2c1_boardinfo[0].irq = gpio_to_irq(78);
omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo,
ARRAY_SIZE(sdp2430_i2c1_boardinfo));
- omap_pmic_init(2, 100, "twl4030", INT_24XX_SYS_NIRQ,
+ omap_pmic_init(2, 100, "twl4030", 7 + OMAP_INTC_START,
&sdp2430_twldata);
return 0;
}
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index a98c688058a..5453173ff57 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -25,13 +25,11 @@
#include <linux/gpio.h>
#include <linux/mmc/host.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/mcspi.h>
-#include <plat/board.h>
#include <plat/usb.h>
#include "common.h"
#include <plat/dma.h>
@@ -191,9 +189,6 @@ static struct omap_dss_board_info sdp3430_dss_data = {
.default_device = &sdp3430_lcd_device,
};
-static struct omap_board_config_kernel sdp3430_config[] __initdata = {
-};
-
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
@@ -233,9 +228,6 @@ static int sdp3430_twl_gpio_setup(struct device *dev,
}
static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
.pulldowns = BIT(2) | BIT(6) | BIT(8) | BIT(13)
| BIT(16) | BIT(17),
.setup = sdp3430_twl_gpio_setup,
@@ -576,8 +568,6 @@ static void __init omap_3430sdp_init(void)
int gpio_pendown;
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
- omap_board_config = sdp3430_config;
- omap_board_config_size = ARRAY_SIZE(sdp3430_config);
omap_hsmmc_init(mmc);
omap3430_i2c_init();
omap_display_init(&sdp3430_dss_data);
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 2dc9ba523c7..8518b134598 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -17,7 +17,6 @@
#include <asm/mach/arch.h>
#include "common.h"
-#include <plat/board.h>
#include <plat/gpmc-smc91x.h>
#include <plat/usb.h>
@@ -67,9 +66,6 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
.reset_gpio_port[2] = -EINVAL
};
-static struct omap_board_config_kernel sdp_config[] __initdata = {
-};
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -197,8 +193,6 @@ static struct flash_partitions sdp_flash_partitions[] = {
static void __init omap_sdp_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
- omap_board_config = sdp_config;
- omap_board_config_size = ARRAY_SIZE(sdp_config);
zoom_peripherals_init();
omap_sdrc_init(h8mbx00u0mer0em_sdrc_params,
h8mbx00u0mer0em_sdrc_params);
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index ad8a7d94afc..db43e22526c 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -28,13 +28,11 @@
#include <linux/leds_pwm.h>
#include <linux/platform_data/omap4-keypad.h>
-#include <mach/hardware.h>
#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/board.h>
#include "common.h"
#include <plat/usb.h>
#include <plat/mmc.h>
@@ -45,6 +43,7 @@
#include <linux/wl12xx.h>
#include <linux/platform_data/omap-abe-twl6040.h>
+#include "soc.h"
#include "mux.h"
#include "hsmmc.h"
#include "control.h"
@@ -544,7 +543,6 @@ static struct twl6040_platform_data twl6040_data = {
.codec = &twl6040_codec,
.vibra = &twl6040_vibra,
.audpwron_gpio = 127,
- .irq_base = TWL6040_CODEC_IRQ_BASE,
};
static struct twl4030_platform_data sdp4430_twldata = {
@@ -581,7 +579,7 @@ static int __init omap4_i2c_init(void)
TWL_COMMON_REGULATOR_V1V8 |
TWL_COMMON_REGULATOR_V2V1);
omap4_pmic_init("twl6030", &sdp4430_twldata,
- &twl6040_data, OMAP44XX_IRQ_SYS_2N);
+ &twl6040_data, 119 + OMAP44XX_IRQ_GIC_START);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
ARRAY_SIZE(sdp4430_i2c_3_boardinfo));
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 92432c28673..318feadb1d6 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -21,12 +21,10 @@
#include <linux/init.h>
#include <linux/gpio.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/board.h>
#include "common.h"
#include <plat/usb.h>
@@ -37,11 +35,6 @@
#define GPIO_USB_POWER 35
#define GPIO_USB_NRESET 38
-
-/* Board initialization */
-static struct omap_board_config_kernel am3517_crane_config[] __initdata = {
-};
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -67,9 +60,6 @@ static void __init am3517_crane_init(void)
omap_serial_init();
omap_sdrc_init(NULL, NULL);
- omap_board_config = am3517_crane_config;
- omap_board_config_size = ARRAY_SIZE(am3517_crane_config);
-
/* Configure GPIO for EHCI port */
if (omap_mux_init_gpio(GPIO_USB_NRESET, OMAP_PIN_OUTPUT)) {
pr_err("Can not configure mux for GPIO_USB_NRESET %d\n",
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 18f601096ce..403d048a00e 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -25,14 +25,13 @@
#include <linux/can/platform/ti_hecc.h>
#include <linux/davinci_emac.h>
#include <linux/mmc/host.h>
+#include <linux/platform_data/gpio-omap.h>
-#include <mach/hardware.h>
#include <mach/am35xx.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/board.h>
#include "common.h"
#include <plat/usb.h>
#include <video/omapdss.h>
@@ -296,8 +295,7 @@ static struct resource am3517_hecc_resources[] = {
.flags = IORESOURCE_MEM,
},
{
- .start = INT_35XX_HECC0_IRQ,
- .end = INT_35XX_HECC0_IRQ,
+ .start = 24 + OMAP_INTC_START,
.flags = IORESOURCE_IRQ,
},
};
@@ -324,9 +322,6 @@ static void am3517_evm_hecc_init(struct ti_hecc_platform_data *pdata)
platform_device_register(&am3517_hecc_device);
}
-static struct omap_board_config_kernel am3517_evm_config[] __initdata = {
-};
-
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
@@ -346,8 +341,6 @@ static struct omap2_hsmmc_info mmc[] = {
static void __init am3517_evm_init(void)
{
- omap_board_config = am3517_evm_config;
- omap_board_config_size = ARRAY_SIZE(am3517_evm_config);
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
am3517_evm_i2c_init();
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index e5fa46bfde2..3e2d76f05af 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -29,13 +29,11 @@
#include <linux/smc91x.h>
#include <linux/gpio.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <plat/led.h>
-#include <plat/board.h>
#include "common.h"
#include <plat/gpmc.h>
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 97d719047af..34cb90471d9 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -23,6 +23,7 @@
#include <linux/input/matrix_keypad.h>
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
#include <linux/i2c/at24.h>
#include <linux/i2c/twl.h>
@@ -37,7 +38,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/board.h>
#include "common.h"
#include <plat/nand.h>
#include <plat/gpmc.h>
@@ -470,9 +470,6 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
}
static struct twl4030_gpio_platform_data cm_t35_gpio_data = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
.setup = cm_t35_twl_gpio_setup,
};
@@ -714,13 +711,8 @@ static inline void cm_t35_init_mux(void) {}
static inline void cm_t3730_init_mux(void) {}
#endif
-static struct omap_board_config_kernel cm_t35_config[] __initdata = {
-};
-
static void __init cm_t3x_common_init(void)
{
- omap_board_config = cm_t35_config;
- omap_board_config_size = ARRAY_SIZE(cm_t35_config);
omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index a33ad4641d9..27a5450751e 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -38,7 +38,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/board.h>
#include "common.h"
#include <plat/usb.h>
#include <plat/nand.h>
@@ -90,8 +89,7 @@ static struct resource cm_t3517_hecc_resources[] = {
.flags = IORESOURCE_MEM,
},
{
- .start = INT_35XX_HECC0_IRQ,
- .end = INT_35XX_HECC0_IRQ,
+ .start = 24 + OMAP_INTC_START,
.flags = IORESOURCE_IRQ,
},
};
@@ -249,9 +247,6 @@ static void __init cm_t3517_init_nand(void)
static inline void cm_t3517_init_nand(void) {}
#endif
-static struct omap_board_config_kernel cm_t3517_config[] __initdata = {
-};
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* GPIO186 - Green LED */
@@ -285,8 +280,6 @@ static void __init cm_t3517_init(void)
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_serial_init();
omap_sdrc_init(NULL, NULL);
- omap_board_config = cm_t3517_config;
- omap_board_config_size = ARRAY_SIZE(cm_t3517_config);
cm_t3517_init_leds();
cm_t3517_init_nand();
cm_t3517_init_rtc();
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 6567c1cd557..18b63ad5627 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -32,15 +32,12 @@
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
-
-#include <mach/hardware.h>
#include <mach/id.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
-#include <plat/board.h>
#include "common.h"
#include <plat/gpmc.h>
#include <plat/nand.h>
@@ -56,7 +53,6 @@
#include <linux/interrupt.h>
#include "sdram-micron-mt46h32m32lf-6.h"
-
#include "mux.h"
#include "hsmmc.h"
#include "common-board-devices.h"
@@ -236,9 +232,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
}
static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
.pulldowns = BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13)
| BIT(15) | BIT(16) | BIT(17),
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index 53c39d239d6..9017813f9ab 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -16,13 +16,14 @@
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/io.h>
-#include <plat/irqs.h>
+#include <plat/cpu.h>
#include <plat/gpmc.h>
#include <plat/nand.h>
#include <plat/onenand.h>
#include <plat/tc.h>
+#include "common.h"
#include "board-flash.h"
#define REG_FPGA_REV 0x10
@@ -140,7 +141,6 @@ __init board_nand_init(struct mtd_partition *nand_parts,
board_nand_data.devsize = nand_type;
board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT;
- board_nand_data.gpmc_irq = OMAP_GPMC_IRQ_BASE + cs;
gpmc_nand_init(&board_nand_data);
}
#endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 6f93a20536e..2ea7c577b29 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -16,11 +16,9 @@
#include <linux/of_platform.h>
#include <linux/irqdomain.h>
-#include <mach/hardware.h>
#include <asm/hardware/gic.h>
#include <asm/mach/arch.h>
-#include <plat/board.h>
#include "common.h"
#include "common-board-devices.h"
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index ace20482e3e..12569cb0edd 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -27,20 +27,19 @@
#include <linux/io.h>
#include <linux/input/matrix_keypad.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/board.h>
-#include "common.h"
#include <plat/menelaus.h>
#include <plat/dma.h>
#include <plat/gpmc.h>
+#include <plat/debug-devices.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
+#include "common.h"
#include "mux.h"
#include "control.h"
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 28214483aab..8408bb2748a 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -29,10 +29,10 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <plat/board.h>
#include "common.h"
#include <plat/gpmc.h>
#include <plat/usb.h>
+
#include <video/omapdss.h>
#include <video/omap-panel-tfp410.h>
#include <plat/onenand.h>
@@ -425,9 +425,6 @@ static int igep_twl_gpio_setup(struct device *dev,
};
static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
.setup = igep_twl_gpio_setup,
};
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index ef9e8297749..3f3a552b103 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -29,18 +29,14 @@
#include <linux/smsc911x.h>
#include <linux/mmc/host.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/mcspi.h>
-#include <plat/board.h>
#include "common.h"
#include <plat/gpmc.h>
#include <mach/board-zoom.h>
-
-#include <asm/delay.h>
#include <plat/usb.h>
#include <plat/gpmc-smsc911x.h>
@@ -275,9 +271,6 @@ static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio)
}
static struct twl4030_gpio_platform_data ldp_gpio_data = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
.setup = ldp_twl_gpio_setup,
};
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 677357ff61a..d8deaea37dc 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -25,14 +25,11 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <plat/board.h>
#include "common.h"
#include <plat/menelaus.h>
-#include <mach/irqs.h>
#include <plat/mcspi.h>
#include <plat/onenand.h>
#include <plat/mmc.h>
-#include <plat/serial.h>
#include "mux.h"
@@ -600,7 +597,7 @@ static struct menelaus_platform_data n8x0_menelaus_platform_data __initdata = {
static struct i2c_board_info __initdata n8x0_i2c_board_info_1[] __initdata = {
{
I2C_BOARD_INFO("menelaus", 0x72),
- .irq = INT_24XX_SYS_NIRQ,
+ .irq = 7 + OMAP_INTC_START,
.platform_data = &n8x0_menelaus_platform_data,
},
};
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 6202fc76e49..801bcb4c5e2 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -33,13 +33,11 @@
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
-#include <plat/board.h>
#include "common.h"
#include <video/omapdss.h>
#include <video/omap-panel-tfp410.h>
@@ -297,9 +295,6 @@ static int beagle_twl_gpio_setup(struct device *dev,
}
static struct twl4030_gpio_platform_data beagle_gpio_data = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
.pullups = BIT(1),
.pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 0d362e9f9cb..b94873d0c6b 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -40,12 +40,10 @@
#include <linux/mmc/host.h>
#include <linux/export.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/board.h>
#include <plat/usb.h>
#include <plat/nand.h>
#include "common.h"
@@ -75,6 +73,18 @@
#define OMAP3EVM_GEN1_ETHR_GPIO_RST 64
#define OMAP3EVM_GEN2_ETHR_GPIO_RST 7
+/*
+ * OMAP35x EVM revision
+ * Run time detection of EVM revision is done by reading Ethernet
+ * PHY ID -
+ * GEN_1 = 0x01150000
+ * GEN_2 = 0x92200000
+ */
+enum {
+ OMAP3EVM_BOARD_GEN_1 = 0, /* EVM Rev between A - D */
+ OMAP3EVM_BOARD_GEN_2, /* EVM Rev >= Rev E */
+};
+
static u8 omap3_evm_version;
u8 get_omap3_evm_rev(void)
@@ -377,9 +387,6 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
}
static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
.setup = omap3evm_twl_gpio_setup,
};
@@ -526,9 +533,6 @@ static int __init omap3_evm_i2c_init(void)
return 0;
}
-static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
-};
-
static struct usbhs_omap_board_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
@@ -688,9 +692,6 @@ static void __init omap3_evm_init(void)
obm = (cpu_is_omap3630()) ? omap36x_board_mux : omap35x_board_mux;
omap3_mux_init(obm, OMAP_PACKAGE_CBB);
- omap_board_config = omap3_evm_config;
- omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
-
omap_mux_init_gpio(63, OMAP_PIN_INPUT);
omap_hsmmc_init(mmc);
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index fca93d1afd4..b5e56fa83c1 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -30,24 +30,21 @@
#include <linux/i2c/twl.h>
#include <linux/mmc/host.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include "mux.h"
-#include "hsmmc.h"
-#include "control.h"
-#include "common-board-devices.h"
-
-#include <plat/mux.h>
-#include <plat/board.h>
-#include "common.h"
#include <plat/gpmc-smsc911x.h>
#include <plat/gpmc.h>
#include <plat/sdrc.h>
#include <plat/usb.h>
+#include "common.h"
+#include "mux.h"
+#include "hsmmc.h"
+#include "control.h"
+#include "common-board-devices.h"
+
#define OMAP3LOGIC_SMSC911X_CS 1
#define OMAP3530_LV_SOM_MMC_GPIO_CD 110
@@ -78,9 +75,6 @@ static struct regulator_init_data omap3logic_vmmc1 = {
};
static struct twl4030_gpio_platform_data omap3logic_gpio_data = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
.pullups = BIT(1),
.pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8)
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 57aebee44fd..e700a98feba 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -40,9 +40,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/board.h>
#include "common.h"
-#include <mach/hardware.h>
#include <plat/mcspi.h>
#include <plat/usb.h>
#include <video/omapdss.h>
@@ -321,9 +319,6 @@ static int omap3pandora_twl_gpio_setup(struct device *dev,
}
static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
.setup = omap3pandora_twl_gpio_setup,
};
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index b318f5602e3..b8756f0d2a0 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -28,14 +28,17 @@
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
#include <linux/mmc/host.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/spi/spi.h>
+#include <linux/interrupt.h>
+#include <linux/smsc911x.h>
+#include <linux/i2c/at24.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
-#include <plat/board.h>
#include "common.h"
#include <plat/gpmc.h>
#include <plat/nand.h>
@@ -279,9 +282,6 @@ omap3stalker_twl_gpio_setup(struct device *dev,
}
static struct twl4030_gpio_platform_data omap3stalker_gpio_data = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
.setup = omap3stalker_twl_gpio_setup,
};
@@ -362,9 +362,6 @@ static int __init omap3_stalker_i2c_init(void)
#define OMAP3_STALKER_TS_GPIO 175
-static struct omap_board_config_kernel omap3_stalker_config[] __initdata = {
-};
-
static struct platform_device *omap3_stalker_devices[] __initdata = {
&keys_gpio,
};
@@ -399,8 +396,6 @@ static void __init omap3_stalker_init(void)
{
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
- omap_board_config = omap3_stalker_config;
- omap_board_config_size = ARRAY_SIZE(omap3_stalker_config);
omap_mux_init_gpio(23, OMAP_PIN_INPUT);
omap_hsmmc_init(mmc);
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 485d14d6a8c..0e2f838e400 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -37,14 +37,12 @@
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <asm/system_info.h>
-#include <plat/board.h>
#include "common.h"
#include <plat/gpmc.h>
#include <plat/nand.h>
@@ -139,9 +137,6 @@ static int touchbook_twl_gpio_setup(struct device *dev,
}
static struct twl4030_gpio_platform_data touchbook_gpio_data = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
.pullups = BIT(1),
.pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 70f6d1d2546..45fe2d3f59b 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -32,19 +32,18 @@
#include <linux/wl12xx.h>
#include <linux/platform_data/omap-abe-twl6040.h>
-#include <mach/hardware.h>
#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <video/omapdss.h>
-#include <plat/board.h>
#include "common.h"
#include <plat/usb.h>
#include <plat/mmc.h>
#include <video/omap-panel-tfp410.h>
+#include "soc.h"
#include "hsmmc.h"
#include "control.h"
#include "mux.h"
@@ -263,7 +262,6 @@ static struct twl6040_codec_data twl6040_codec = {
static struct twl6040_platform_data twl6040_data = {
.codec = &twl6040_codec,
.audpwron_gpio = 127,
- .irq_base = TWL6040_CODEC_IRQ_BASE,
};
/* Panda board uses the common PMIC configuration */
@@ -294,7 +292,7 @@ static int __init omap4_panda_i2c_init(void)
TWL_COMMON_REGULATOR_V1V8 |
TWL_COMMON_REGULATOR_V2V1);
omap4_pmic_init("twl6030", &omap4_panda_twldata,
- &twl6040_data, OMAP44XX_IRQ_SYS_2N);
+ &twl6040_data, 119 + OMAP44XX_IRQ_GIC_START);
omap_register_i2c_bus(2, 400, NULL, 0);
/*
* Bus 3 is attached to the DVI port where devices like the pico DLP
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 779734d8ba3..7a62d1322b7 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -42,16 +42,13 @@
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
-#include <plat/board.h>
#include "common.h"
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
#include <plat/gpmc.h>
-#include <mach/hardware.h>
#include <plat/nand.h>
#include <plat/mcspi.h>
-#include <plat/mux.h>
#include <plat/usb.h>
#include "mux.h"
@@ -399,9 +396,6 @@ static int overo_twl_gpio_setup(struct device *dev,
}
static struct twl4030_gpio_platform_data overo_gpio_data = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
.setup = overo_twl_gpio_setup,
};
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 0ad1bb3bdb9..00773a32524 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -27,6 +27,7 @@
#include <plat/gpmc.h>
#include "common.h"
#include <plat/onenand.h>
+#include <plat/serial.h>
#include "mux.h"
#include "hsmmc.h"
@@ -72,9 +73,6 @@ static struct platform_device *rm680_peripherals_devices[] __initdata = {
/* TWL */
static struct twl4030_gpio_platform_data rm680_gpio_data = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
.pullups = BIT(0),
.pulldowns = BIT(1) | BIT(2) | BIT(8) | BIT(15),
};
@@ -87,7 +85,7 @@ static struct twl4030_platform_data rm680_twl_data = {
static void __init rm680_i2c_init(void)
{
omap3_pmic_get_config(&rm680_twl_data, TWL_COMMON_PDATA_USB, 0);
- omap_pmic_init(1, 2900, "twl5031", INT_34XX_SYS_NIRQ, &rm680_twl_data);
+ omap_pmic_init(1, 2900, "twl5031", 7 + OMAP_INTC_START, &rm680_twl_data);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
}
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index df2534de336..456049055da 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -28,7 +28,6 @@
#include <asm/system_info.h>
#include <plat/mcspi.h>
-#include <plat/board.h>
#include "common.h"
#include <plat/dma.h>
#include <plat/gpmc.h>
@@ -774,9 +773,6 @@ static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
}
static struct twl4030_gpio_platform_data rx51_gpio_data = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
.pulldowns = BIT(0) | BIT(1) | BIT(2) | BIT(3)
| BIT(4) | BIT(5)
| BIT(8) | BIT(9) | BIT(10) | BIT(11)
@@ -1051,7 +1047,7 @@ static int __init rx51_i2c_init(void)
rx51_twldata.vdac->constraints.apply_uV = true;
rx51_twldata.vdac->constraints.name = "VDAC";
- omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata);
+ omap_pmic_init(1, 2200, "twl5030", 7 + OMAP_INTC_START, &rx51_twldata);
omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 345dd931f76..93b46615000 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -18,13 +18,11 @@
#include <linux/gpio.h>
#include <linux/leds.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/mcspi.h>
-#include <plat/board.h>
#include "common.h"
#include <plat/dma.h>
#include <plat/gpmc.h>
diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c
index d4c8392cadb..c4f8833b4c3 100644
--- a/arch/arm/mach-omap2/board-ti8168evm.c
+++ b/arch/arm/mach-omap2/board-ti8168evm.c
@@ -15,13 +15,10 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/irqs.h>
-#include <plat/board.h>
#include "common.h"
#include <plat/usb.h>
@@ -32,15 +29,10 @@ static struct omap_musb_board_data musb_board_data = {
.power = 500,
};
-static struct omap_board_config_kernel ti81xx_evm_config[] __initdata = {
-};
-
static void __init ti81xx_evm_init(void)
{
omap_serial_init();
omap_sdrc_init(NULL, NULL);
- omap_board_config = ti81xx_evm_config;
- omap_board_config_size = ARRAY_SIZE(ti81xx_evm_config);
usb_musb_init(&musb_board_data);
}
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index f64f4417306..5ec069e529e 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -22,6 +22,9 @@
#include <mach/board-zoom.h>
+#include "soc.h"
+#include "common.h"
+
#define ZOOM_SMSC911X_CS 7
#define ZOOM_SMSC911X_GPIO 158
#define ZOOM_QUADUART_CS 3
diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c
index 28187f134ff..ea79bc299ba 100644
--- a/arch/arm/mach-omap2/board-zoom-display.c
+++ b/arch/arm/mach-omap2/board-zoom-display.c
@@ -18,6 +18,8 @@
#include <video/omapdss.h>
#include <mach/board-zoom.h>
+#include "common.h"
+
#define LCD_PANEL_RESET_GPIO_PROD 96
#define LCD_PANEL_RESET_GPIO_PILOT 55
#define LCD_PANEL_QVGA_GPIO 56
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index b797cb27961..6bcc107b9fc 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -19,6 +19,7 @@
#include <linux/regulator/fixed.h>
#include <linux/wl12xx.h>
#include <linux/mmc/host.h>
+#include <linux/platform_data/gpio-omap.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -251,9 +252,6 @@ static void zoom2_set_hs_extmute(int mute)
}
static struct twl4030_gpio_platform_data zoom_gpio_data = {
- .gpio_base = OMAP_MAX_GPIO_LINES,
- .irq_base = TWL4030_GPIO_IRQ_BASE,
- .irq_end = TWL4030_GPIO_IRQ_END,
.setup = zoom_twl_gpio_setup,
};
@@ -281,7 +279,7 @@ static int __init omap_i2c_init(void)
codec_data->hs_extmute = 1;
codec_data->set_hs_extmute = zoom2_set_hs_extmute;
}
- omap_pmic_init(1, 2400, "twl5030", INT_34XX_SYS_NIRQ, &zoom_twldata);
+ omap_pmic_init(1, 2400, "twl5030", 7 + OMAP_INTC_START, &zoom_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
return 0;
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index 4e7e56142e6..4994438e1f4 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -22,7 +22,6 @@
#include <asm/mach/arch.h>
#include "common.h"
-#include <plat/board.h>
#include <plat/usb.h>
#include <mach/board-zoom.h>
diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
index 3d9d746b221..cabcfdba524 100644
--- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
+++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
@@ -33,11 +33,11 @@
#include <linux/cpufreq.h>
#include <linux/slab.h>
-#include <plat/cpu.h>
#include <plat/clock.h>
#include <plat/sram.h>
#include <plat/sdrc.h>
+#include "soc.h"
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index cd7fd0f9114..ae624c3b832 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -22,8 +22,8 @@
#include <asm/div64.h>
#include <plat/clock.h>
-#include <plat/cpu.h>
+#include "soc.h"
#include "clock.h"
#include "cm-regbits-24xx.h"
#include "cm-regbits-34xx.h"
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index ea3f565ba1a..1a1f97f3ca6 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -22,14 +22,16 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/bitops.h>
-#include <trace/events/power.h>
#include <asm/cpu.h>
+
#include <plat/clock.h>
-#include "clockdomain.h"
-#include <plat/cpu.h>
#include <plat/prcm.h>
+#include <trace/events/power.h>
+
+#include "soc.h"
+#include "clockdomain.h"
#include "clock.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c
index 002745181ad..12c178dbc9f 100644
--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -18,9 +18,9 @@
#include <linux/clk.h>
#include <linux/list.h>
-#include <plat/hardware.h>
#include <plat/clkdev_omap.h>
+#include "soc.h"
#include "iomap.h"
#include "clock.h"
#include "clock2xxx.h"
diff --git a/arch/arm/mach-omap2/clock2430.c b/arch/arm/mach-omap2/clock2430.c
index dfda9a3f2cb..a8e32617746 100644
--- a/arch/arm/mach-omap2/clock2430.c
+++ b/arch/arm/mach-omap2/clock2430.c
@@ -21,9 +21,9 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/hardware.h>
#include <plat/clock.h>
+#include "soc.h"
#include "iomap.h"
#include "clock.h"
#include "clock2xxx.h"
diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c
index cacabb070e2..02fe1f28aff 100644
--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -17,9 +17,9 @@
#include <linux/clk.h>
#include <linux/list.h>
-#include <plat/hardware.h>
#include <plat/clkdev_omap.h>
+#include "soc.h"
#include "iomap.h"
#include "clock.h"
#include "clock2xxx.h"
diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c
index 12500097378..e92be1fc1a0 100644
--- a/arch/arm/mach-omap2/clock2xxx.c
+++ b/arch/arm/mach-omap2/clock2xxx.c
@@ -22,9 +22,9 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/cpu.h>
#include <plat/clock.h>
+#include "soc.h"
#include "clock.h"
#include "clock2xxx.h"
#include "cm.h"
diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c
index 25bbcc7ca4d..7aa5ecaee5a 100644
--- a/arch/arm/mach-omap2/clock33xx_data.c
+++ b/arch/arm/mach-omap2/clock33xx_data.c
@@ -18,8 +18,8 @@
#include <linux/list.h>
#include <linux/clk.h>
#include <plat/clkdev_omap.h>
-#include <plat/am33xx.h>
+#include "am33xx.h"
#include "iomap.h"
#include "control.h"
#include "clock.h"
diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c
index 794d82702c8..fc2765bcdd4 100644
--- a/arch/arm/mach-omap2/clock3xxx.c
+++ b/arch/arm/mach-omap2/clock3xxx.c
@@ -21,9 +21,9 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/hardware.h>
#include <plat/clock.h>
+#include "soc.h"
#include "clock.h"
#include "clock3xxx.h"
#include "prm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 83bed9ad301..10a2398e173 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -21,9 +21,9 @@
#include <linux/list.h>
#include <linux/io.h>
-#include <plat/hardware.h>
#include <plat/clkdev_omap.h>
+#include "soc.h"
#include "iomap.h"
#include "clock.h"
#include "clock3xxx.h"
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index d7f55e43b76..500682c051c 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -28,9 +28,9 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/hardware.h>
#include <plat/clkdev_omap.h>
+#include "soc.h"
#include "iomap.h"
#include "clock.h"
#include "clock44xx.h"
diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.c b/arch/arm/mach-omap2/cm2xxx_3xxx.c
index 389f9f8b570..a911e76b4ec 100644
--- a/arch/arm/mach-omap2/cm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/cm2xxx_3xxx.c
@@ -18,8 +18,7 @@
#include <linux/err.h>
#include <linux/io.h>
-#include <plat/hardware.h>
-
+#include "soc.h"
#include "iomap.h"
#include "common.h"
#include "cm.h"
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index c1875862679..013fedc9e13 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -27,6 +27,7 @@
#include <plat/mcspi.h>
#include <plat/nand.h>
+#include "common.h"
#include "common-board-devices.h"
#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c
index 069f9725b1c..8e43c4d885d 100644
--- a/arch/arm/mach-omap2/common.c
+++ b/arch/arm/mach-omap2/common.c
@@ -17,11 +17,10 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/hardware.h>
-#include <plat/board.h>
#include <plat/mux.h>
#include <plat/clock.h>
+#include "soc.h"
#include "iomap.h"
#include "common.h"
#include "sdrc.h"
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 1f65b1871c2..da0f5c18735 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -26,11 +26,18 @@
#define __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H
#ifndef __ASSEMBLER__
+#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/i2c/twl.h>
-#include <plat/common.h>
+
#include <asm/proc-fns.h>
+#include <plat/cpu.h>
+#include <plat/serial.h>
+#include <plat/common.h>
+
+#define OMAP_INTC_START NR_IRQS
+
#ifdef CONFIG_SOC_OMAP2420
extern void omap242x_map_common_io(void);
#else
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 3223b81e753..d1ff8399a22 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -15,9 +15,9 @@
#include <linux/kernel.h>
#include <linux/io.h>
-#include <plat/hardware.h>
#include <plat/sdrc.h>
+#include "soc.h"
#include "iomap.h"
#include "common.h"
#include "cm-regbits-34xx.h"
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index b8cdc8531b6..c1a5cab0f23 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -21,7 +21,7 @@
#include <mach/ctrl_module_pad_core_44xx.h>
#include <mach/ctrl_module_pad_wkup_44xx.h>
-#include <plat/am33xx.h>
+#include "am33xx.h"
#ifndef __ASSEMBLY__
#define OMAP242X_CTRL_REGADDR(reg) \
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index f2a49a48ef5..bc2756959be 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -28,7 +28,6 @@
#include <linux/cpu_pm.h>
#include <plat/prcm.h>
-#include <plat/irqs.h>
#include "powerdomain.h"
#include "clockdomain.h"
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index c00c68961bb..1efa984b1a4 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -19,19 +19,18 @@
#include <linux/of.h>
#include <linux/platform_data/omap4-keypad.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/pmu.h>
#include "iomap.h"
-#include <plat/board.h>
#include <plat/dma.h>
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
#include <plat/omap4-keypad.h>
+#include "soc.h"
+#include "common.h"
#include "mux.h"
#include "control.h"
#include "devices.h"
@@ -112,7 +111,7 @@ static struct resource omap2cam_resources[] = {
.flags = IORESOURCE_MEM,
},
{
- .start = INT_24XX_CAM_IRQ,
+ .start = 24 + OMAP_INTC_START,
.flags = IORESOURCE_IRQ,
}
};
@@ -201,7 +200,7 @@ static struct resource omap3isp_resources[] = {
.flags = IORESOURCE_MEM,
},
{
- .start = INT_34XX_CAM_IRQ,
+ .start = 24 + OMAP_INTC_START,
.flags = IORESOURCE_IRQ,
}
};
@@ -435,14 +434,12 @@ static inline void omap_init_mcspi(void) {}
#endif
static struct resource omap2_pmu_resource = {
- .start = 3,
- .end = 3,
+ .start = 3 + OMAP_INTC_START,
.flags = IORESOURCE_IRQ,
};
static struct resource omap3_pmu_resource = {
- .start = INT_34XX_BENCH_MPU_EMUL,
- .end = INT_34XX_BENCH_MPU_EMUL,
+ .start = 3 + OMAP_INTC_START,
.flags = IORESOURCE_IRQ,
};
@@ -475,7 +472,7 @@ static struct resource omap2_sham_resources[] = {
.flags = IORESOURCE_MEM,
},
{
- .start = INT_24XX_SHA1MD5,
+ .start = 51 + OMAP_INTC_START,
.flags = IORESOURCE_IRQ,
}
};
@@ -493,7 +490,7 @@ static struct resource omap3_sham_resources[] = {
.flags = IORESOURCE_MEM,
},
{
- .start = INT_34XX_SHA1MD52_IRQ,
+ .start = 49 + OMAP_INTC_START,
.flags = IORESOURCE_IRQ,
},
{
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index b9c8d2f6a81..d8318dc5ee9 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -28,9 +28,9 @@
#include <linux/bitops.h>
#include <linux/clkdev.h>
-#include <plat/cpu.h>
#include <plat/clock.h>
+#include "soc.h"
#include "clock.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c
index 9c6a296b3dc..09d0ccccb86 100644
--- a/arch/arm/mach-omap2/dpll44xx.c
+++ b/arch/arm/mach-omap2/dpll44xx.c
@@ -15,9 +15,9 @@
#include <linux/io.h>
#include <linux/bitops.h>
-#include <plat/cpu.h>
#include <plat/clock.h>
+#include "soc.h"
#include "clock.h"
#include "clock44xx.h"
#include "cm-regbits-44xx.h"
diff --git a/arch/arm/mach-omap2/emu.c b/arch/arm/mach-omap2/emu.c
index e28e761b7ab..b3566f68a55 100644
--- a/arch/arm/mach-omap2/emu.c
+++ b/arch/arm/mach-omap2/emu.c
@@ -21,8 +21,7 @@
#include <linux/clk.h>
#include <linux/err.h>
-#include <mach/hardware.h>
-
+#include "soc.h"
#include "iomap.h"
MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 9ad7d489b0d..7b52bdfc59c 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -21,6 +21,7 @@
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/of.h>
+#include <linux/platform_data/gpio-omap.h>
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index 386dec8d235..9e9f47ad618 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -16,20 +16,28 @@
#include <asm/mach/flash.h>
-#include <plat/cpu.h>
#include <plat/nand.h>
-#include <plat/board.h>
#include <plat/gpmc.h>
-static struct resource gpmc_nand_resource = {
- .flags = IORESOURCE_MEM,
+#include "soc.h"
+
+static struct resource gpmc_nand_resource[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .flags = IORESOURCE_IRQ,
+ },
};
static struct platform_device gpmc_nand_device = {
.name = "omap2-nand",
.id = 0,
- .num_resources = 1,
- .resource = &gpmc_nand_resource,
+ .num_resources = ARRAY_SIZE(gpmc_nand_resource),
+ .resource = gpmc_nand_resource,
};
static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data)
@@ -75,6 +83,7 @@ static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data
gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 0);
gpmc_cs_configure(gpmc_nand_data->cs,
GPMC_CONFIG_DEV_TYPE, GPMC_DEVICETYPE_NAND);
+ gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_WP, 0);
err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t);
if (err)
return err;
@@ -90,12 +99,19 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data)
gpmc_nand_device.dev.platform_data = gpmc_nand_data;
err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE,
- &gpmc_nand_data->phys_base);
+ (unsigned long *)&gpmc_nand_resource[0].start);
if (err < 0) {
dev_err(dev, "Cannot request GPMC CS\n");
return err;
}
+ gpmc_nand_resource[0].end = gpmc_nand_resource[0].start +
+ NAND_IO_SIZE - 1;
+
+ gpmc_nand_resource[1].start =
+ gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE);
+ gpmc_nand_resource[2].start =
+ gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT);
/* Set timings in GPMC */
err = omap2_nand_gpmc_retime(gpmc_nand_data);
if (err < 0) {
@@ -108,6 +124,8 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data)
gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_RDY_BSY, 1);
}
+ gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs);
+
err = platform_device_register(&gpmc_nand_device);
if (err < 0) {
dev_err(dev, "Unable to register NAND device\n");
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index a0fa9bb2bda..b66fb8e5faa 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -18,16 +18,24 @@
#include <asm/mach/flash.h>
-#include <plat/cpu.h>
#include <plat/onenand.h>
-#include <plat/board.h>
#include <plat/gpmc.h>
+#include "soc.h"
+
+#define ONENAND_IO_SIZE SZ_128K
+
static struct omap_onenand_platform_data *gpmc_onenand_data;
+static struct resource gpmc_onenand_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
static struct platform_device gpmc_onenand_device = {
.name = "omap2-onenand",
.id = -1,
+ .num_resources = 1,
+ .resource = &gpmc_onenand_resource,
};
static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
@@ -390,6 +398,8 @@ static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr)
void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
{
+ int err;
+
gpmc_onenand_data = _onenand_data;
gpmc_onenand_data->onenand_setup = gpmc_onenand_setup;
gpmc_onenand_device.dev.platform_data = gpmc_onenand_data;
@@ -401,8 +411,19 @@ void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
}
+ err = gpmc_cs_request(gpmc_onenand_data->cs, ONENAND_IO_SIZE,
+ (unsigned long *)&gpmc_onenand_resource.start);
+ if (err < 0) {
+ pr_err("%s: Cannot request GPMC CS\n", __func__);
+ return;
+ }
+
+ gpmc_onenand_resource.end = gpmc_onenand_resource.start +
+ ONENAND_IO_SIZE - 1;
+
if (platform_device_register(&gpmc_onenand_device) < 0) {
- printk(KERN_ERR "Unable to register OneNAND device\n");
+ pr_err("%s: Unable to register OneNAND device\n", __func__);
+ gpmc_cs_free(gpmc_onenand_data->cs);
return;
}
}
diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c
index ba10c24f3d8..245839dfc72 100644
--- a/arch/arm/mach-omap2/gpmc-smc91x.c
+++ b/arch/arm/mach-omap2/gpmc-smc91x.c
@@ -17,10 +17,11 @@
#include <linux/io.h>
#include <linux/smc91x.h>
-#include <plat/board.h>
#include <plat/gpmc.h>
#include <plat/gpmc-smc91x.h>
+#include "soc.h"
+
static struct omap_smc91x_platform_data *gpmc_cfg;
static struct resource gpmc_smc91x_resources[] = {
diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c
index b6c77be3e8f..a3a28878f0c 100644
--- a/arch/arm/mach-omap2/gpmc-smsc911x.c
+++ b/arch/arm/mach-omap2/gpmc-smsc911x.c
@@ -20,7 +20,6 @@
#include <linux/io.h>
#include <linux/smsc911x.h>
-#include <plat/board.h>
#include <plat/gpmc.h>
#include <plat/gpmc-smsc911x.h>
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index b2b5759ab0f..055ae8bd943 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -28,8 +28,13 @@
#include <asm/mach-types.h>
#include <plat/gpmc.h>
+#include <plat/cpu.h>
+#include <plat/gpmc.h>
#include <plat/sdrc.h>
+#include "soc.h"
+#include "common.h"
+
/* GPMC register offsets */
#define GPMC_REVISION 0x00
#define GPMC_SYSCONFIG 0x10
@@ -78,6 +83,15 @@
#define ENABLE_PREFETCH (0x1 << 7)
#define DMA_MPU_MODE 2
+/* XXX: Only NAND irq has been considered,currently these are the only ones used
+ */
+#define GPMC_NR_IRQ 2
+
+struct gpmc_client_irq {
+ unsigned irq;
+ u32 bitmask;
+};
+
/* Structure to save gpmc cs context */
struct gpmc_cs_config {
u32 config1;
@@ -105,6 +119,10 @@ struct omap3_gpmc_regs {
struct gpmc_cs_config cs_context[GPMC_CS_NUM];
};
+static struct gpmc_client_irq gpmc_client_irq[GPMC_NR_IRQ];
+static struct irq_chip gpmc_irq_chip;
+static unsigned gpmc_irq_start;
+
static struct resource gpmc_mem_root;
static struct resource gpmc_cs_mem[GPMC_CS_NUM];
static DEFINE_SPINLOCK(gpmc_mem_lock);
@@ -682,6 +700,117 @@ int gpmc_prefetch_reset(int cs)
}
EXPORT_SYMBOL(gpmc_prefetch_reset);
+void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
+{
+ reg->gpmc_status = gpmc_base + GPMC_STATUS;
+ reg->gpmc_nand_command = gpmc_base + GPMC_CS0_OFFSET +
+ GPMC_CS_NAND_COMMAND + GPMC_CS_SIZE * cs;
+ reg->gpmc_nand_address = gpmc_base + GPMC_CS0_OFFSET +
+ GPMC_CS_NAND_ADDRESS + GPMC_CS_SIZE * cs;
+ reg->gpmc_nand_data = gpmc_base + GPMC_CS0_OFFSET +
+ GPMC_CS_NAND_DATA + GPMC_CS_SIZE * cs;
+ reg->gpmc_prefetch_config1 = gpmc_base + GPMC_PREFETCH_CONFIG1;
+ reg->gpmc_prefetch_config2 = gpmc_base + GPMC_PREFETCH_CONFIG2;
+ reg->gpmc_prefetch_control = gpmc_base + GPMC_PREFETCH_CONTROL;
+ reg->gpmc_prefetch_status = gpmc_base + GPMC_PREFETCH_STATUS;
+ reg->gpmc_ecc_config = gpmc_base + GPMC_ECC_CONFIG;
+ reg->gpmc_ecc_control = gpmc_base + GPMC_ECC_CONTROL;
+ reg->gpmc_ecc_size_config = gpmc_base + GPMC_ECC_SIZE_CONFIG;
+ reg->gpmc_ecc1_result = gpmc_base + GPMC_ECC1_RESULT;
+ reg->gpmc_bch_result0 = gpmc_base + GPMC_ECC_BCH_RESULT_0;
+}
+
+int gpmc_get_client_irq(unsigned irq_config)
+{
+ int i;
+
+ if (hweight32(irq_config) > 1)
+ return 0;
+
+ for (i = 0; i < GPMC_NR_IRQ; i++)
+ if (gpmc_client_irq[i].bitmask & irq_config)
+ return gpmc_client_irq[i].irq;
+
+ return 0;
+}
+
+static int gpmc_irq_endis(unsigned irq, bool endis)
+{
+ int i;
+ u32 regval;
+
+ for (i = 0; i < GPMC_NR_IRQ; i++)
+ if (irq == gpmc_client_irq[i].irq) {
+ regval = gpmc_read_reg(GPMC_IRQENABLE);
+ if (endis)
+ regval |= gpmc_client_irq[i].bitmask;
+ else
+ regval &= ~gpmc_client_irq[i].bitmask;
+ gpmc_write_reg(GPMC_IRQENABLE, regval);
+ break;
+ }
+
+ return 0;
+}
+
+static void gpmc_irq_disable(struct irq_data *p)
+{
+ gpmc_irq_endis(p->irq, false);
+}
+
+static void gpmc_irq_enable(struct irq_data *p)
+{
+ gpmc_irq_endis(p->irq, true);
+}
+
+static void gpmc_irq_noop(struct irq_data *data) { }
+
+static unsigned int gpmc_irq_noop_ret(struct irq_data *data) { return 0; }
+
+static int gpmc_setup_irq(int gpmc_irq)
+{
+ int i;
+ u32 regval;
+
+ if (!gpmc_irq)
+ return -EINVAL;
+
+ gpmc_irq_start = irq_alloc_descs(-1, 0, GPMC_NR_IRQ, 0);
+ if (IS_ERR_VALUE(gpmc_irq_start)) {
+ pr_err("irq_alloc_descs failed\n");
+ return gpmc_irq_start;
+ }
+
+ gpmc_irq_chip.name = "gpmc";
+ gpmc_irq_chip.irq_startup = gpmc_irq_noop_ret;
+ gpmc_irq_chip.irq_enable = gpmc_irq_enable;
+ gpmc_irq_chip.irq_disable = gpmc_irq_disable;
+ gpmc_irq_chip.irq_shutdown = gpmc_irq_noop;
+ gpmc_irq_chip.irq_ack = gpmc_irq_noop;
+ gpmc_irq_chip.irq_mask = gpmc_irq_noop;
+ gpmc_irq_chip.irq_unmask = gpmc_irq_noop;
+
+ gpmc_client_irq[0].bitmask = GPMC_IRQ_FIFOEVENTENABLE;
+ gpmc_client_irq[1].bitmask = GPMC_IRQ_COUNT_EVENT;
+
+ for (i = 0; i < GPMC_NR_IRQ; i++) {
+ gpmc_client_irq[i].irq = gpmc_irq_start + i;
+ irq_set_chip_and_handler(gpmc_client_irq[i].irq,
+ &gpmc_irq_chip, handle_simple_irq);
+ set_irq_flags(gpmc_client_irq[i].irq,
+ IRQF_VALID | IRQF_NOAUTOEN);
+ }
+
+ /* Disable interrupts */
+ gpmc_write_reg(GPMC_IRQENABLE, 0);
+
+ /* clear interrupts */
+ regval = gpmc_read_reg(GPMC_IRQSTATUS);
+ gpmc_write_reg(GPMC_IRQSTATUS, regval);
+
+ return request_irq(gpmc_irq, gpmc_handle_irq, 0, "gpmc", NULL);
+}
+
static void __init gpmc_mem_init(void)
{
int cs;
@@ -711,8 +840,8 @@ static void __init gpmc_mem_init(void)
static int __init gpmc_init(void)
{
- u32 l, irq;
- int cs, ret = -EINVAL;
+ u32 l;
+ int ret = -EINVAL;
int gpmc_irq;
char *ck = NULL;
@@ -722,16 +851,16 @@ static int __init gpmc_init(void)
l = OMAP2420_GPMC_BASE;
else
l = OMAP34XX_GPMC_BASE;
- gpmc_irq = INT_34XX_GPMC_IRQ;
+ gpmc_irq = 20 + OMAP_INTC_START;
} else if (cpu_is_omap34xx()) {
ck = "gpmc_fck";
l = OMAP34XX_GPMC_BASE;
- gpmc_irq = INT_34XX_GPMC_IRQ;
+ gpmc_irq = 20 + OMAP_INTC_START;
} else if (cpu_is_omap44xx() || soc_is_omap54xx()) {
/* Base address and irq number are same for OMAP4/5 */
ck = "gpmc_ck";
l = OMAP44XX_GPMC_BASE;
- gpmc_irq = OMAP44XX_IRQ_GPMC;
+ gpmc_irq = 20 + OMAP44XX_IRQ_GIC_START;
}
if (WARN_ON(!ck))
@@ -761,16 +890,7 @@ static int __init gpmc_init(void)
gpmc_write_reg(GPMC_SYSCONFIG, l);
gpmc_mem_init();
- /* initalize the irq_chained */
- irq = OMAP_GPMC_IRQ_BASE;
- for (cs = 0; cs < GPMC_CS_NUM; cs++) {
- irq_set_chip_and_handler(irq, &dummy_irq_chip,
- handle_simple_irq);
- set_irq_flags(irq, IRQF_VALID);
- irq++;
- }
-
- ret = request_irq(gpmc_irq, gpmc_handle_irq, IRQF_SHARED, "gpmc", NULL);
+ ret = gpmc_setup_irq(gpmc_irq);
if (ret)
pr_err("gpmc: irq-%d could not claim: err %d\n",
gpmc_irq, ret);
@@ -780,12 +900,19 @@ postcore_initcall(gpmc_init);
static irqreturn_t gpmc_handle_irq(int irq, void *dev)
{
- u8 cs;
+ int i;
+ u32 regval;
+
+ regval = gpmc_read_reg(GPMC_IRQSTATUS);
+
+ if (!regval)
+ return IRQ_NONE;
+
+ for (i = 0; i < GPMC_NR_IRQ; i++)
+ if (regval & gpmc_client_irq[i].bitmask)
+ generic_handle_irq(gpmc_client_irq[i].irq);
- /* check cs to invoke the irq */
- cs = ((gpmc_read_reg(GPMC_PREFETCH_CONFIG1)) >> CS_NUM_SHIFT) & 0x7;
- if (OMAP_GPMC_IRQ_BASE+cs <= OMAP_GPMC_IRQ_END)
- generic_handle_irq(OMAP_GPMC_IRQ_BASE+cs);
+ gpmc_write_reg(GPMC_IRQSTATUS, regval);
return IRQ_HANDLED;
}
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index a9675d8d182..80399d74095 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -15,6 +15,8 @@
#include <linux/delay.h>
#include <linux/gpio.h>
#include <mach/hardware.h>
+#include <linux/platform_data/gpio-omap.h>
+
#include <plat/mmc.h>
#include <plat/omap-pm.h>
#include <plat/mux.h>
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
index a12e224eb97..fc57e67b321 100644
--- a/arch/arm/mach-omap2/i2c.c
+++ b/arch/arm/mach-omap2/i2c.c
@@ -19,7 +19,6 @@
*
*/
-#include <plat/cpu.h>
#include <plat/i2c.h>
#include "common.h"
#include <plat/omap_hwmod.h>
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 40373db649a..7219df0e831 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -22,10 +22,10 @@
#include <asm/cputype.h>
#include "common.h"
-#include <plat/cpu.h>
#include <mach/id.h>
+#include "soc.h"
#include "control.h"
static unsigned int omap_revision;
diff --git a/arch/arm/mach-omap2/include/mach/gpio.h b/arch/arm/mach-omap2/include/mach/gpio.h
index be4d290d57e..5621cc59c9f 100644
--- a/arch/arm/mach-omap2/include/mach/gpio.h
+++ b/arch/arm/mach-omap2/include/mach/gpio.h
@@ -1,5 +1,3 @@
/*
* arch/arm/mach-omap2/include/mach/gpio.h
*/
-
-#include <plat/gpio.h>
diff --git a/arch/arm/mach-omap2/include/mach/hardware.h b/arch/arm/mach-omap2/include/mach/hardware.h
index 78edf9d33f7..54492dbf697 100644
--- a/arch/arm/mach-omap2/include/mach/hardware.h
+++ b/arch/arm/mach-omap2/include/mach/hardware.h
@@ -1,5 +1,3 @@
/*
* arch/arm/mach-omap2/include/mach/hardware.h
*/
-
-#include <plat/hardware.h>
diff --git a/arch/arm/mach-omap2/include/mach/irqs.h b/arch/arm/mach-omap2/include/mach/irqs.h
index 44dab772569..ba5282cafa4 100644
--- a/arch/arm/mach-omap2/include/mach/irqs.h
+++ b/arch/arm/mach-omap2/include/mach/irqs.h
@@ -1,5 +1,3 @@
/*
* arch/arm/mach-omap2/include/mach/irqs.h
*/
-
-#include <plat/irqs.h>
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 4d2d981ff5c..0d79c23e9f8 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -33,6 +33,7 @@
#include <plat/multi.h>
#include <plat/dma.h>
+#include "soc.h"
#include "iomap.h"
#include "voltage.h"
#include "powerdomain.h"
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index bcd83db41bb..efed4f540ad 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -23,8 +23,7 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
-#include <mach/hardware.h>
-
+#include "soc.h"
#include "iomap.h"
#include "common.h"
@@ -49,6 +48,8 @@
#define OMAP3_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* omap2/3 active interrupt offset */
#define ACTIVEIRQ_MASK 0x7f /* omap2/3 active interrupt bits */
+#define INTCPS_NR_MIR_REGS 3
+#define INTCPS_NR_IRQS 96
/*
* OMAP2 has a number of different interrupt controllers, each interrupt
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 6875be837d9..0d974565f8c 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -16,8 +16,10 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/pm_runtime.h>
+
#include <plat/mailbox.h>
-#include <mach/irqs.h>
+
+#include "soc.h"
#define MAILBOX_REVISION 0x000
#define MAILBOX_MESSAGE(m) (0x040 + 4 * (m))
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 577cb77db26..d493727632e 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -18,9 +18,7 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
-#include <mach/irqs.h>
#include <plat/dma.h>
-#include <plat/cpu.h>
#include <plat/mcbsp.h>
#include <plat/omap_device.h>
#include <linux/pm_runtime.h>
diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c
index fb5bc6cf377..9e57b4aadb0 100644
--- a/arch/arm/mach-omap2/msdi.c
+++ b/arch/arm/mach-omap2/msdi.c
@@ -23,6 +23,7 @@
#include <linux/kernel.h>
#include <linux/err.h>
+#include <linux/platform_data/gpio-omap.h>
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c
index 1be8bcb52e9..df298d46707 100644
--- a/arch/arm/mach-omap2/omap-iommu.c
+++ b/arch/arm/mach-omap2/omap-iommu.c
@@ -14,7 +14,9 @@
#include <linux/platform_device.h>
#include <plat/iommu.h>
-#include <plat/irqs.h>
+
+#include "soc.h"
+#include "common.h"
struct iommu_device {
resource_size_t base;
@@ -29,7 +31,7 @@ static int num_iommu_devices;
static struct iommu_device omap3_devices[] = {
{
.base = 0x480bd400,
- .irq = 24,
+ .irq = 24 + OMAP_INTC_START,
.pdata = {
.name = "isp",
.nr_tlb_entries = 8,
@@ -41,7 +43,7 @@ static struct iommu_device omap3_devices[] = {
#if defined(CONFIG_OMAP_IOMMU_IVA2)
{
.base = 0x5d000000,
- .irq = 28,
+ .irq = 28 + OMAP_INTC_START,
.pdata = {
.name = "iva2",
.nr_tlb_entries = 32,
@@ -64,7 +66,7 @@ static struct platform_device *omap3_iommu_pdev[NR_OMAP3_IOMMU_DEVICES];
static struct iommu_device omap4_devices[] = {
{
.base = OMAP4_MMU1_BASE,
- .irq = OMAP44XX_IRQ_DUCATI_MMU,
+ .irq = 100 + OMAP44XX_IRQ_GIC_START,
.pdata = {
.name = "ducati",
.nr_tlb_entries = 32,
@@ -75,7 +77,7 @@ static struct iommu_device omap4_devices[] = {
},
{
.base = OMAP4_MMU2_BASE,
- .irq = OMAP44XX_IRQ_TESLA_MMU,
+ .irq = 28 + OMAP44XX_IRQ_GIC_START,
.pdata = {
.name = "tesla",
.nr_tlb_entries = 32,
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
index 637a1bdf2ac..ff4e6a0e9c7 100644
--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -50,9 +50,8 @@
#include <asm/suspend.h>
#include <asm/hardware/cache-l2x0.h>
-#include <plat/omap44xx.h>
-
#include "common.h"
+#include "omap44xx.h"
#include "omap4-sar-layout.h"
#include "pm.h"
#include "prcm_mpu44xx.h"
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 9a35adf9123..19cc5f504f7 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -24,11 +24,11 @@
#include <asm/hardware/gic.h>
#include <asm/smp_scu.h>
-#include <mach/hardware.h>
#include <mach/omap-secure.h>
#include <mach/omap-wakeupgen.h>
#include <asm/cputype.h>
+#include "soc.h"
#include "iomap.h"
#include "common.h"
#include "clockdomain.h"
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
index 05fdebfaa19..b54427dec2a 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.c
+++ b/arch/arm/mach-omap2/omap-wakeupgen.c
@@ -30,6 +30,7 @@
#include <mach/omap-wakeupgen.h>
#include <mach/omap-secure.h>
+#include "soc.h"
#include "omap4-sar-layout.h"
#include "common.h"
diff --git a/arch/arm/plat-omap/include/plat/omap24xx.h b/arch/arm/mach-omap2/omap24xx.h
index 92df9e27cc5..641a2c8d2ee 100644
--- a/arch/arm/plat-omap/include/plat/omap24xx.h
+++ b/arch/arm/mach-omap2/omap24xx.h
@@ -1,6 +1,4 @@
/*
- * arch/arm/plat-omap/include/mach/omap24xx.h
- *
* This file contains the processor specific definitions
* of the TI OMAP24XX.
*
diff --git a/arch/arm/plat-omap/include/plat/omap34xx.h b/arch/arm/mach-omap2/omap34xx.h
index 0d818acf391..c0d1b4b1653 100644
--- a/arch/arm/plat-omap/include/plat/omap34xx.h
+++ b/arch/arm/mach-omap2/omap34xx.h
@@ -1,6 +1,4 @@
/*
- * arch/arm/plat-omap/include/mach/omap34xx.h
- *
* This file contains the processor specific definitions of the TI OMAP34XX.
*
* Copyright (C) 2007 Texas Instruments.
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index c29dee998a7..3cd2564ed5c 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -16,26 +16,25 @@
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/memblock.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/export.h>
#include <asm/hardware/gic.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/map.h>
#include <asm/memblock.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <plat/irqs.h>
#include <plat/sram.h>
#include <plat/omap-secure.h>
#include <plat/mmc.h>
-#include <mach/hardware.h>
#include <mach/omap-wakeupgen.h>
+#include "soc.h"
#include "common.h"
#include "hsmmc.h"
#include "omap4-sar-layout.h"
-#include <linux/export.h>
#ifdef CONFIG_CACHE_L2X0
static void __iomem *l2cache_base;
@@ -171,7 +170,10 @@ static int __init omap_l2_cache_init(void)
/* Enable PL310 L2 Cache controller */
omap_smc1(0x102, 0x1);
- l2x0_init(l2cache_base, aux_ctrl, L2X0_AUX_CTRL_MASK);
+ if (of_have_populated_dt())
+ l2x0_of_init(aux_ctrl, L2X0_AUX_CTRL_MASK);
+ else
+ l2x0_init(l2cache_base, aux_ctrl, L2X0_AUX_CTRL_MASK);
/*
* Override default outer_cache.disable with a OMAP4
diff --git a/arch/arm/plat-omap/include/plat/omap44xx.h b/arch/arm/mach-omap2/omap44xx.h
index c0d478e55c8..43b927b2e2e 100644
--- a/arch/arm/plat-omap/include/plat/omap44xx.h
+++ b/arch/arm/mach-omap2/omap44xx.h
@@ -39,12 +39,12 @@
#define IRQ_SIR_IRQ 0x0040
#define OMAP44XX_GIC_DIST_BASE 0x48241000
#define OMAP44XX_GIC_CPU_BASE 0x48240100
+#define OMAP44XX_IRQ_GIC_START 32
#define OMAP44XX_SCU_BASE 0x48240000
#define OMAP44XX_LOCAL_TWD_BASE 0x48240600
#define OMAP44XX_L2CACHE_BASE 0x48242000
#define OMAP44XX_WKUPGEN_BASE 0x48281000
#define OMAP44XX_MCPDM_BASE 0x40132000
-#define OMAP44XX_MCPDM_L3_BASE 0x49032000
#define OMAP44XX_SAR_RAM_BASE 0x4a326000
#define OMAP44XX_MAILBOX_BASE (L4_44XX_BASE + 0xF4000)
diff --git a/arch/arm/plat-omap/include/plat/omap54xx.h b/arch/arm/mach-omap2/omap54xx.h
index a2582bb3cab..a2582bb3cab 100644
--- a/arch/arm/plat-omap/include/plat/omap54xx.h
+++ b/arch/arm/mach-omap2/omap54xx.h
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 6ca8e519968..4c6b5a77405 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -139,14 +139,14 @@
#include <linux/slab.h>
#include <linux/bootmem.h>
-#include "common.h"
-#include <plat/cpu.h>
-#include "clockdomain.h"
-#include "powerdomain.h"
#include <plat/clock.h>
#include <plat/omap_hwmod.h>
#include <plat/prcm.h>
+#include "soc.h"
+#include "common.h"
+#include "clockdomain.h"
+#include "powerdomain.h"
#include "cm2xxx_3xxx.h"
#include "cminst44xx.h"
#include "prm2xxx_3xxx.h"
@@ -3158,6 +3158,33 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
}
/**
+ * omap_hwmod_fill_dma_resources - fill struct resource array with dma data
+ * @oh: struct omap_hwmod *
+ * @res: pointer to the array of struct resource to fill
+ *
+ * Fill the struct resource array @res with dma resource data from the
+ * omap_hwmod @oh. Intended to be called by code that registers
+ * omap_devices. See also omap_hwmod_count_resources(). Returns the
+ * number of array elements filled.
+ */
+int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res)
+{
+ int i, sdma_reqs_cnt;
+ int r = 0;
+
+ sdma_reqs_cnt = _count_sdma_reqs(oh);
+ for (i = 0; i < sdma_reqs_cnt; i++) {
+ (res + r)->name = (oh->sdma_reqs + i)->name;
+ (res + r)->start = (oh->sdma_reqs + i)->dma_req;
+ (res + r)->end = (oh->sdma_reqs + i)->dma_req;
+ (res + r)->flags = IORESOURCE_DMA;
+ r++;
+ }
+
+ return r;
+}
+
+/**
* omap_hwmod_get_resource_byname - fetch IP block integration data by name
* @oh: struct omap_hwmod * to operate on
* @type: one of the IORESOURCE_* constants from include/linux/ioport.h
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index 50cfab61b0e..4e81637640e 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -13,12 +13,9 @@
* XXX these should be marked initdata for multi-OMAP kernels
*/
#include <plat/omap_hwmod.h>
-#include <mach/irqs.h>
-#include <plat/cpu.h>
#include <plat/dma.h>
#include <plat/serial.h>
#include <plat/i2c.h>
-#include <plat/gpio.h>
#include <plat/mcspi.h>
#include <plat/dmtimer.h>
#include <plat/l3_2xxx.h>
@@ -162,9 +159,9 @@ static struct omap_hwmod omap2420_dma_system_hwmod = {
/* mailbox */
static struct omap_hwmod_irq_info omap2420_mailbox_irqs[] = {
- { .name = "dsp", .irq = 26 },
- { .name = "iva", .irq = 34 },
- { .irq = -1 }
+ { .name = "dsp", .irq = 26 + OMAP_INTC_START, },
+ { .name = "iva", .irq = 34 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap2420_mailbox_hwmod = {
@@ -199,9 +196,9 @@ static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = {
/* mcbsp1 */
static struct omap_hwmod_irq_info omap2420_mcbsp1_irqs[] = {
- { .name = "tx", .irq = 59 },
- { .name = "rx", .irq = 60 },
- { .irq = -1 }
+ { .name = "tx", .irq = 59 + OMAP_INTC_START, },
+ { .name = "rx", .irq = 60 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap2420_mcbsp1_hwmod = {
@@ -225,9 +222,9 @@ static struct omap_hwmod omap2420_mcbsp1_hwmod = {
/* mcbsp2 */
static struct omap_hwmod_irq_info omap2420_mcbsp2_irqs[] = {
- { .name = "tx", .irq = 62 },
- { .name = "rx", .irq = 63 },
- { .irq = -1 }
+ { .name = "tx", .irq = 62 + OMAP_INTC_START, },
+ { .name = "rx", .irq = 63 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap2420_mcbsp2_hwmod = {
@@ -265,8 +262,8 @@ static struct omap_hwmod_class omap2420_msdi_hwmod_class = {
/* msdi1 */
static struct omap_hwmod_irq_info omap2420_msdi1_irqs[] = {
- { .irq = 83 },
- { .irq = -1 }
+ { .irq = 83 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod_dma_info omap2420_msdi1_sdma_reqs[] = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 58b5bc196d3..ceb23c3fa89 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -13,20 +13,17 @@
* XXX these should be marked initdata for multi-OMAP kernels
*/
#include <plat/omap_hwmod.h>
-#include <mach/irqs.h>
-#include <plat/cpu.h>
#include <plat/dma.h>
#include <plat/serial.h>
#include <plat/i2c.h>
-#include <plat/gpio.h>
#include <plat/mcbsp.h>
#include <plat/mcspi.h>
#include <plat/dmtimer.h>
#include <plat/mmc.h>
#include <plat/l3_2xxx.h>
+#include "soc.h"
#include "omap_hwmod_common_data.h"
-
#include "prm-regbits-24xx.h"
#include "cm-regbits-24xx.h"
#include "wd_timer.h"
@@ -133,8 +130,8 @@ static struct omap_hwmod omap2430_i2c2_hwmod = {
/* gpio5 */
static struct omap_hwmod_irq_info omap243x_gpio5_irqs[] = {
- { .irq = 33 }, /* INT_24XX_GPIO_BANK5 */
- { .irq = -1 }
+ { .irq = 33 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK5 */
+ { .irq = -1 },
};
static struct omap_hwmod omap2430_gpio5_hwmod = {
@@ -173,8 +170,8 @@ static struct omap_hwmod omap2430_dma_system_hwmod = {
/* mailbox */
static struct omap_hwmod_irq_info omap2430_mailbox_irqs[] = {
- { .irq = 26 },
- { .irq = -1 }
+ { .irq = 26 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap2430_mailbox_hwmod = {
@@ -195,8 +192,8 @@ static struct omap_hwmod omap2430_mailbox_hwmod = {
/* mcspi3 */
static struct omap_hwmod_irq_info omap2430_mcspi3_mpu_irqs[] = {
- { .irq = 91 },
- { .irq = -1 }
+ { .irq = 91 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod_dma_info omap2430_mcspi3_sdma_reqs[] = {
@@ -250,9 +247,9 @@ static struct omap_hwmod_class usbotg_class = {
/* usb_otg_hs */
static struct omap_hwmod_irq_info omap2430_usbhsotg_mpu_irqs[] = {
- { .name = "mc", .irq = 92 },
- { .name = "dma", .irq = 93 },
- { .irq = -1 }
+ { .name = "mc", .irq = 92 + OMAP_INTC_START, },
+ { .name = "dma", .irq = 93 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap2430_usbhsotg_hwmod = {
@@ -303,11 +300,11 @@ static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = {
/* mcbsp1 */
static struct omap_hwmod_irq_info omap2430_mcbsp1_irqs[] = {
- { .name = "tx", .irq = 59 },
- { .name = "rx", .irq = 60 },
- { .name = "ovr", .irq = 61 },
- { .name = "common", .irq = 64 },
- { .irq = -1 }
+ { .name = "tx", .irq = 59 + OMAP_INTC_START, },
+ { .name = "rx", .irq = 60 + OMAP_INTC_START, },
+ { .name = "ovr", .irq = 61 + OMAP_INTC_START, },
+ { .name = "common", .irq = 64 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap2430_mcbsp1_hwmod = {
@@ -331,10 +328,10 @@ static struct omap_hwmod omap2430_mcbsp1_hwmod = {
/* mcbsp2 */
static struct omap_hwmod_irq_info omap2430_mcbsp2_irqs[] = {
- { .name = "tx", .irq = 62 },
- { .name = "rx", .irq = 63 },
- { .name = "common", .irq = 16 },
- { .irq = -1 }
+ { .name = "tx", .irq = 62 + OMAP_INTC_START, },
+ { .name = "rx", .irq = 63 + OMAP_INTC_START, },
+ { .name = "common", .irq = 16 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap2430_mcbsp2_hwmod = {
@@ -358,10 +355,10 @@ static struct omap_hwmod omap2430_mcbsp2_hwmod = {
/* mcbsp3 */
static struct omap_hwmod_irq_info omap2430_mcbsp3_irqs[] = {
- { .name = "tx", .irq = 89 },
- { .name = "rx", .irq = 90 },
- { .name = "common", .irq = 17 },
- { .irq = -1 }
+ { .name = "tx", .irq = 89 + OMAP_INTC_START, },
+ { .name = "rx", .irq = 90 + OMAP_INTC_START, },
+ { .name = "common", .irq = 17 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap2430_mcbsp3_hwmod = {
@@ -385,10 +382,10 @@ static struct omap_hwmod omap2430_mcbsp3_hwmod = {
/* mcbsp4 */
static struct omap_hwmod_irq_info omap2430_mcbsp4_irqs[] = {
- { .name = "tx", .irq = 54 },
- { .name = "rx", .irq = 55 },
- { .name = "common", .irq = 18 },
- { .irq = -1 }
+ { .name = "tx", .irq = 54 + OMAP_INTC_START, },
+ { .name = "rx", .irq = 55 + OMAP_INTC_START, },
+ { .name = "common", .irq = 18 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod_dma_info omap2430_mcbsp4_sdma_chs[] = {
@@ -418,10 +415,10 @@ static struct omap_hwmod omap2430_mcbsp4_hwmod = {
/* mcbsp5 */
static struct omap_hwmod_irq_info omap2430_mcbsp5_irqs[] = {
- { .name = "tx", .irq = 81 },
- { .name = "rx", .irq = 82 },
- { .name = "common", .irq = 19 },
- { .irq = -1 }
+ { .name = "tx", .irq = 81 + OMAP_INTC_START, },
+ { .name = "rx", .irq = 82 + OMAP_INTC_START, },
+ { .name = "common", .irq = 19 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod_dma_info omap2430_mcbsp5_sdma_chs[] = {
@@ -468,8 +465,8 @@ static struct omap_hwmod_class omap2430_mmc_class = {
/* MMC/SD/SDIO1 */
static struct omap_hwmod_irq_info omap2430_mmc1_mpu_irqs[] = {
- { .irq = 83 },
- { .irq = -1 }
+ { .irq = 83 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod_dma_info omap2430_mmc1_sdma_reqs[] = {
@@ -509,8 +506,8 @@ static struct omap_hwmod omap2430_mmc1_hwmod = {
/* MMC/SD/SDIO2 */
static struct omap_hwmod_irq_info omap2430_mmc2_mpu_irqs[] = {
- { .irq = 86 },
- { .irq = -1 }
+ { .irq = 86 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod_dma_info omap2430_mmc2_sdma_reqs[] = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
index 102d76e9e9e..bea700e928e 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
@@ -15,8 +15,6 @@
#include <plat/common.h>
#include <plat/hdq1w.h>
-#include <mach/irqs.h>
-
#include "omap_hwmod_common_data.h"
/* UART */
@@ -182,126 +180,126 @@ struct omap_hwmod_class iva_hwmod_class = {
/* Common MPU IRQ line data */
struct omap_hwmod_irq_info omap2_timer1_mpu_irqs[] = {
- { .irq = 37, },
- { .irq = -1 }
+ { .irq = 37 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_timer2_mpu_irqs[] = {
- { .irq = 38, },
- { .irq = -1 }
+ { .irq = 38 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_timer3_mpu_irqs[] = {
- { .irq = 39, },
- { .irq = -1 }
+ { .irq = 39 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_timer4_mpu_irqs[] = {
- { .irq = 40, },
- { .irq = -1 }
+ { .irq = 40 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_timer5_mpu_irqs[] = {
- { .irq = 41, },
- { .irq = -1 }
+ { .irq = 41 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_timer6_mpu_irqs[] = {
- { .irq = 42, },
- { .irq = -1 }
+ { .irq = 42 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_timer7_mpu_irqs[] = {
- { .irq = 43, },
- { .irq = -1 }
+ { .irq = 43 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_timer8_mpu_irqs[] = {
- { .irq = 44, },
- { .irq = -1 }
+ { .irq = 44 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_timer9_mpu_irqs[] = {
- { .irq = 45, },
- { .irq = -1 }
+ { .irq = 45 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_timer10_mpu_irqs[] = {
- { .irq = 46, },
- { .irq = -1 }
+ { .irq = 46 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_timer11_mpu_irqs[] = {
- { .irq = 47, },
- { .irq = -1 }
+ { .irq = 47 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_uart1_mpu_irqs[] = {
- { .irq = INT_24XX_UART1_IRQ, },
- { .irq = -1 }
+ { .irq = 72 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_uart2_mpu_irqs[] = {
- { .irq = INT_24XX_UART2_IRQ, },
- { .irq = -1 }
+ { .irq = 73 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_uart3_mpu_irqs[] = {
- { .irq = INT_24XX_UART3_IRQ, },
- { .irq = -1 }
+ { .irq = 74 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_dispc_irqs[] = {
- { .irq = 25 },
- { .irq = -1 }
+ { .irq = 25 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_i2c1_mpu_irqs[] = {
- { .irq = INT_24XX_I2C1_IRQ, },
- { .irq = -1 }
+ { .irq = 56 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_i2c2_mpu_irqs[] = {
- { .irq = INT_24XX_I2C2_IRQ, },
- { .irq = -1 }
+ { .irq = 57 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_gpio1_irqs[] = {
- { .irq = 29 }, /* INT_24XX_GPIO_BANK1 */
- { .irq = -1 }
+ { .irq = 29 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK1 */
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_gpio2_irqs[] = {
- { .irq = 30 }, /* INT_24XX_GPIO_BANK2 */
- { .irq = -1 }
+ { .irq = 30 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK2 */
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_gpio3_irqs[] = {
- { .irq = 31 }, /* INT_24XX_GPIO_BANK3 */
- { .irq = -1 }
+ { .irq = 31 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK3 */
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_gpio4_irqs[] = {
- { .irq = 32 }, /* INT_24XX_GPIO_BANK4 */
- { .irq = -1 }
+ { .irq = 32 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK4 */
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_dma_system_irqs[] = {
- { .name = "0", .irq = 12 }, /* INT_24XX_SDMA_IRQ0 */
- { .name = "1", .irq = 13 }, /* INT_24XX_SDMA_IRQ1 */
- { .name = "2", .irq = 14 }, /* INT_24XX_SDMA_IRQ2 */
- { .name = "3", .irq = 15 }, /* INT_24XX_SDMA_IRQ3 */
- { .irq = -1 }
+ { .name = "0", .irq = 12 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ0 */
+ { .name = "1", .irq = 13 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ1 */
+ { .name = "2", .irq = 14 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ2 */
+ { .name = "3", .irq = 15 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ3 */
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_mcspi1_mpu_irqs[] = {
- { .irq = 65 },
- { .irq = -1 }
+ { .irq = 65 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_irq_info omap2_mcspi2_mpu_irqs[] = {
- { .irq = 66 },
- { .irq = -1 }
+ { .irq = 66 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_class_sysconfig omap2_hdq1w_sysc = {
@@ -320,7 +318,7 @@ struct omap_hwmod_class omap2_hdq1w_class = {
};
struct omap_hwmod_irq_info omap2_hdq1w_mpu_irqs[] = {
- { .irq = 58, },
- { .irq = -1 }
+ { .irq = 58 + OMAP_INTC_START, },
+ { .irq = -1 },
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index afad69c6ba6..ceb30524234 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -10,21 +10,19 @@
*/
#include <plat/omap_hwmod.h>
#include <plat/serial.h>
-#include <plat/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
#include <plat/dma.h>
#include <plat/dmtimer.h>
#include <plat/mcspi.h>
-#include <mach/irqs.h>
-
#include "omap_hwmod_common_data.h"
#include "cm-regbits-24xx.h"
#include "prm-regbits-24xx.h"
#include "wd_timer.h"
struct omap_hwmod_irq_info omap2xxx_timer12_mpu_irqs[] = {
- { .irq = 48, },
- { .irq = -1 }
+ { .irq = 48 + OMAP_INTC_START, },
+ { .irq = -1 },
};
struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[] = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index c9e38200216..75fbbac1392 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -15,26 +15,26 @@
* XXX these should be marked initdata for multi-OMAP kernels
*/
#include <linux/power/smartreflex.h>
+#include <linux/platform_data/gpio-omap.h>
#include <plat/omap_hwmod.h>
-#include <mach/irqs.h>
-#include <plat/cpu.h>
#include <plat/dma.h>
#include <plat/serial.h>
#include <plat/l3_3xxx.h>
#include <plat/l4_3xxx.h>
#include <plat/i2c.h>
-#include <plat/gpio.h>
#include <plat/mmc.h>
#include <plat/mcbsp.h>
#include <plat/mcspi.h>
#include <plat/dmtimer.h>
+#include <mach/am35xx.h>
+
+#include "soc.h"
#include "omap_hwmod_common_data.h"
#include "prm-regbits-34xx.h"
#include "cm-regbits-34xx.h"
#include "wd_timer.h"
-#include <mach/am35xx.h>
/*
* OMAP3xxx hardware module integration data
@@ -51,9 +51,9 @@
/* L3 */
static struct omap_hwmod_irq_info omap3xxx_l3_main_irqs[] = {
- { .irq = INT_34XX_L3_DBG_IRQ },
- { .irq = INT_34XX_L3_APP_IRQ },
- { .irq = -1 }
+ { .irq = 9 + OMAP_INTC_START, },
+ { .irq = 10 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap3xxx_l3_main_hwmod = {
@@ -355,8 +355,8 @@ static struct omap_hwmod omap3xxx_timer11_hwmod = {
/* timer12 */
static struct omap_hwmod_irq_info omap3xxx_timer12_mpu_irqs[] = {
- { .irq = 95, },
- { .irq = -1 }
+ { .irq = 95 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap3xxx_timer12_hwmod = {
@@ -490,8 +490,8 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = {
/* UART4 */
static struct omap_hwmod_irq_info uart4_mpu_irqs[] = {
- { .irq = INT_36XX_UART4_IRQ, },
- { .irq = -1 }
+ { .irq = 80 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod_dma_info uart4_sdma_reqs[] = {
@@ -518,8 +518,8 @@ static struct omap_hwmod omap36xx_uart4_hwmod = {
};
static struct omap_hwmod_irq_info am35xx_uart4_mpu_irqs[] = {
- { .irq = INT_35XX_UART4_IRQ, },
- { .irq = -1 }
+ { .irq = 84 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod_dma_info am35xx_uart4_sdma_reqs[] = {
@@ -674,8 +674,8 @@ static struct omap_hwmod_class omap3xxx_dsi_hwmod_class = {
};
static struct omap_hwmod_irq_info omap3xxx_dsi1_irqs[] = {
- { .irq = 25 },
- { .irq = -1 }
+ { .irq = 25 + OMAP_INTC_START, },
+ { .irq = -1 },
};
/* dss_dsi1 */
@@ -804,8 +804,8 @@ static struct omap_i2c_dev_attr i2c3_dev_attr = {
};
static struct omap_hwmod_irq_info i2c3_mpu_irqs[] = {
- { .irq = INT_34XX_I2C3_IRQ, },
- { .irq = -1 }
+ { .irq = 61 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod_dma_info i2c3_sdma_reqs[] = {
@@ -963,8 +963,8 @@ static struct omap_hwmod omap3xxx_gpio4_hwmod = {
/* gpio5 */
static struct omap_hwmod_irq_info omap3xxx_gpio5_irqs[] = {
- { .irq = 33 }, /* INT_34XX_GPIO_BANK5 */
- { .irq = -1 }
+ { .irq = 33 + OMAP_INTC_START, }, /* INT_34XX_GPIO_BANK5 */
+ { .irq = -1 },
};
static struct omap_hwmod_opt_clk gpio5_opt_clks[] = {
@@ -993,8 +993,8 @@ static struct omap_hwmod omap3xxx_gpio5_hwmod = {
/* gpio6 */
static struct omap_hwmod_irq_info omap3xxx_gpio6_irqs[] = {
- { .irq = 34 }, /* INT_34XX_GPIO_BANK6 */
- { .irq = -1 }
+ { .irq = 34 + OMAP_INTC_START, }, /* INT_34XX_GPIO_BANK6 */
+ { .irq = -1 },
};
static struct omap_hwmod_opt_clk gpio6_opt_clks[] = {
@@ -1098,10 +1098,10 @@ static struct omap_hwmod_opt_clk mcbsp234_opt_clks[] = {
/* mcbsp1 */
static struct omap_hwmod_irq_info omap3xxx_mcbsp1_irqs[] = {
- { .name = "common", .irq = 16 },
- { .name = "tx", .irq = 59 },
- { .name = "rx", .irq = 60 },
- { .irq = -1 }
+ { .name = "common", .irq = 16 + OMAP_INTC_START, },
+ { .name = "tx", .irq = 59 + OMAP_INTC_START, },
+ { .name = "rx", .irq = 60 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap3xxx_mcbsp1_hwmod = {
@@ -1125,10 +1125,10 @@ static struct omap_hwmod omap3xxx_mcbsp1_hwmod = {
/* mcbsp2 */
static struct omap_hwmod_irq_info omap3xxx_mcbsp2_irqs[] = {
- { .name = "common", .irq = 17 },
- { .name = "tx", .irq = 62 },
- { .name = "rx", .irq = 63 },
- { .irq = -1 }
+ { .name = "common", .irq = 17 + OMAP_INTC_START, },
+ { .name = "tx", .irq = 62 + OMAP_INTC_START, },
+ { .name = "rx", .irq = 63 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_mcbsp_dev_attr omap34xx_mcbsp2_dev_attr = {
@@ -1157,10 +1157,10 @@ static struct omap_hwmod omap3xxx_mcbsp2_hwmod = {
/* mcbsp3 */
static struct omap_hwmod_irq_info omap3xxx_mcbsp3_irqs[] = {
- { .name = "common", .irq = 22 },
- { .name = "tx", .irq = 89 },
- { .name = "rx", .irq = 90 },
- { .irq = -1 }
+ { .name = "common", .irq = 22 + OMAP_INTC_START, },
+ { .name = "tx", .irq = 89 + OMAP_INTC_START, },
+ { .name = "rx", .irq = 90 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_mcbsp_dev_attr omap34xx_mcbsp3_dev_attr = {
@@ -1189,10 +1189,10 @@ static struct omap_hwmod omap3xxx_mcbsp3_hwmod = {
/* mcbsp4 */
static struct omap_hwmod_irq_info omap3xxx_mcbsp4_irqs[] = {
- { .name = "common", .irq = 23 },
- { .name = "tx", .irq = 54 },
- { .name = "rx", .irq = 55 },
- { .irq = -1 }
+ { .name = "common", .irq = 23 + OMAP_INTC_START, },
+ { .name = "tx", .irq = 54 + OMAP_INTC_START, },
+ { .name = "rx", .irq = 55 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod_dma_info omap3xxx_mcbsp4_sdma_chs[] = {
@@ -1222,10 +1222,10 @@ static struct omap_hwmod omap3xxx_mcbsp4_hwmod = {
/* mcbsp5 */
static struct omap_hwmod_irq_info omap3xxx_mcbsp5_irqs[] = {
- { .name = "common", .irq = 27 },
- { .name = "tx", .irq = 81 },
- { .name = "rx", .irq = 82 },
- { .irq = -1 }
+ { .name = "common", .irq = 27 + OMAP_INTC_START, },
+ { .name = "tx", .irq = 81 + OMAP_INTC_START, },
+ { .name = "rx", .irq = 82 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod_dma_info omap3xxx_mcbsp5_sdma_chs[] = {
@@ -1267,8 +1267,8 @@ static struct omap_hwmod_class omap3xxx_mcbsp_sidetone_hwmod_class = {
/* mcbsp2_sidetone */
static struct omap_hwmod_irq_info omap3xxx_mcbsp2_sidetone_irqs[] = {
- { .name = "irq", .irq = 4 },
- { .irq = -1 }
+ { .name = "irq", .irq = 4 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = {
@@ -1289,8 +1289,8 @@ static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = {
/* mcbsp3_sidetone */
static struct omap_hwmod_irq_info omap3xxx_mcbsp3_sidetone_irqs[] = {
- { .name = "irq", .irq = 5 },
- { .irq = -1 }
+ { .name = "irq", .irq = 5 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = {
@@ -1352,8 +1352,8 @@ static struct omap_smartreflex_dev_attr sr1_dev_attr = {
};
static struct omap_hwmod_irq_info omap3_smartreflex_mpu_irqs[] = {
- { .irq = 18 },
- { .irq = -1 }
+ { .irq = 18 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap34xx_sr1_hwmod = {
@@ -1397,8 +1397,8 @@ static struct omap_smartreflex_dev_attr sr2_dev_attr = {
};
static struct omap_hwmod_irq_info omap3_smartreflex_core_irqs[] = {
- { .irq = 19 },
- { .irq = -1 }
+ { .irq = 19 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap34xx_sr2_hwmod = {
@@ -1458,8 +1458,8 @@ static struct omap_hwmod_class omap3xxx_mailbox_hwmod_class = {
};
static struct omap_hwmod_irq_info omap3xxx_mailbox_irqs[] = {
- { .irq = 26 },
- { .irq = -1 }
+ { .irq = 26 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap3xxx_mailbox_hwmod = {
@@ -1549,8 +1549,8 @@ static struct omap_hwmod omap34xx_mcspi2 = {
/* mcspi3 */
static struct omap_hwmod_irq_info omap34xx_mcspi3_mpu_irqs[] = {
- { .name = "irq", .irq = 91 }, /* 91 */
- { .irq = -1 }
+ { .name = "irq", .irq = 91 + OMAP_INTC_START, }, /* 91 */
+ { .irq = -1 },
};
static struct omap_hwmod_dma_info omap34xx_mcspi3_sdma_reqs[] = {
@@ -1585,8 +1585,8 @@ static struct omap_hwmod omap34xx_mcspi3 = {
/* mcspi4 */
static struct omap_hwmod_irq_info omap34xx_mcspi4_mpu_irqs[] = {
- { .name = "irq", .irq = INT_34XX_SPI4_IRQ }, /* 48 */
- { .irq = -1 }
+ { .name = "irq", .irq = 48 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod_dma_info omap34xx_mcspi4_sdma_reqs[] = {
@@ -1638,9 +1638,9 @@ static struct omap_hwmod_class usbotg_class = {
/* usb_otg_hs */
static struct omap_hwmod_irq_info omap3xxx_usbhsotg_mpu_irqs[] = {
- { .name = "mc", .irq = 92 },
- { .name = "dma", .irq = 93 },
- { .irq = -1 }
+ { .name = "mc", .irq = 92 + OMAP_INTC_START, },
+ { .name = "dma", .irq = 93 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap3xxx_usbhsotg_hwmod = {
@@ -1670,8 +1670,8 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = {
/* usb_otg_hs */
static struct omap_hwmod_irq_info am35xx_usbhsotg_mpu_irqs[] = {
- { .name = "mc", .irq = 71 },
- { .irq = -1 }
+ { .name = "mc", .irq = 71 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod_class am35xx_usbotg_class = {
@@ -1706,8 +1706,8 @@ static struct omap_hwmod_class omap34xx_mmc_class = {
/* MMC/SD/SDIO1 */
static struct omap_hwmod_irq_info omap34xx_mmc1_mpu_irqs[] = {
- { .irq = 83, },
- { .irq = -1 }
+ { .irq = 83 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod_dma_info omap34xx_mmc1_sdma_reqs[] = {
@@ -1773,8 +1773,8 @@ static struct omap_hwmod omap3xxx_es3plus_mmc1_hwmod = {
/* MMC/SD/SDIO2 */
static struct omap_hwmod_irq_info omap34xx_mmc2_mpu_irqs[] = {
- { .irq = INT_24XX_MMC2_IRQ, },
- { .irq = -1 }
+ { .irq = 86 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod_dma_info omap34xx_mmc2_sdma_reqs[] = {
@@ -1834,8 +1834,8 @@ static struct omap_hwmod omap3xxx_es3plus_mmc2_hwmod = {
/* MMC/SD/SDIO3 */
static struct omap_hwmod_irq_info omap34xx_mmc3_mpu_irqs[] = {
- { .irq = 94, },
- { .irq = -1 }
+ { .irq = 94 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod_dma_info omap34xx_mmc3_sdma_reqs[] = {
@@ -1893,9 +1893,9 @@ static struct omap_hwmod_opt_clk omap3xxx_usb_host_hs_opt_clks[] = {
};
static struct omap_hwmod_irq_info omap3xxx_usb_host_hs_irqs[] = {
- { .name = "ohci-irq", .irq = 76 },
- { .name = "ehci-irq", .irq = 77 },
- { .irq = -1 }
+ { .name = "ohci-irq", .irq = 76 + OMAP_INTC_START, },
+ { .name = "ehci-irq", .irq = 77 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = {
@@ -1987,8 +1987,8 @@ static struct omap_hwmod_class omap3xxx_usb_tll_hs_hwmod_class = {
};
static struct omap_hwmod_irq_info omap3xxx_usb_tll_hs_irqs[] = {
- { .name = "tll-irq", .irq = 78 },
- { .irq = -1 }
+ { .name = "tll-irq", .irq = 78 + OMAP_INTC_START, },
+ { .irq = -1 },
};
static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = {
@@ -3214,11 +3214,11 @@ static struct omap_hwmod_ocp_if am35xx_l4_core__mdio = {
};
static struct omap_hwmod_irq_info am35xx_emac_mpu_irqs[] = {
- { .name = "rxthresh", .irq = INT_35XX_EMAC_C0_RXTHRESH_IRQ },
- { .name = "rx_pulse", .irq = INT_35XX_EMAC_C0_RX_PULSE_IRQ },
- { .name = "tx_pulse", .irq = INT_35XX_EMAC_C0_TX_PULSE_IRQ },
- { .name = "misc_pulse", .irq = INT_35XX_EMAC_C0_MISC_PULSE_IRQ },
- { .irq = -1 }
+ { .name = "rxthresh", .irq = 67 + OMAP_INTC_START, },
+ { .name = "rx_pulse", .irq = 68 + OMAP_INTC_START, },
+ { .name = "tx_pulse", .irq = 69 + OMAP_INTC_START },
+ { .name = "misc_pulse", .irq = 70 + OMAP_INTC_START },
+ { .irq = -1 },
};
static struct omap_hwmod_class am35xx_emac_class = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 242aee498ce..b95244b76a1 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -19,12 +19,11 @@
*/
#include <linux/io.h>
+#include <linux/platform_data/gpio-omap.h>
#include <linux/power/smartreflex.h>
#include <plat/omap_hwmod.h>
-#include <plat/cpu.h>
#include <plat/i2c.h>
-#include <plat/gpio.h>
#include <plat/dma.h>
#include <plat/mcspi.h>
#include <plat/mcbsp.h>
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h
index e7e8eeae95e..dddb677fed6 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h
@@ -16,6 +16,7 @@
#include <plat/omap_hwmod.h>
+#include "common.h"
#include "display.h"
/* Common address space across OMAP2xxx */
diff --git a/arch/arm/mach-omap2/omap_l3_noc.c b/arch/arm/mach-omap2/omap_l3_noc.c
index d15225ff5c4..f447e02102b 100644
--- a/arch/arm/mach-omap2/omap_l3_noc.c
+++ b/arch/arm/mach-omap2/omap_l3_noc.c
@@ -28,6 +28,7 @@
#include <linux/kernel.h>
#include <linux/slab.h>
+#include "soc.h"
#include "omap_l3_noc.h"
/*
@@ -190,7 +191,7 @@ static int __devinit omap4_l3_probe(struct platform_device *pdev)
IRQF_DISABLED, "l3-dbg-irq", l3);
if (ret) {
pr_crit("L3: request_irq failed to register for 0x%x\n",
- OMAP44XX_IRQ_L3_DBG);
+ 9 + OMAP44XX_IRQ_GIC_START);
goto err3;
}
@@ -200,7 +201,7 @@ static int __devinit omap4_l3_probe(struct platform_device *pdev)
IRQF_DISABLED, "l3-app-irq", l3);
if (ret) {
pr_crit("L3: request_irq failed to register for 0x%x\n",
- OMAP44XX_IRQ_L3_APP);
+ 10 + OMAP44XX_IRQ_GIC_START);
goto err4;
}
diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
index d52651a05da..593eaea35ce 100644
--- a/arch/arm/mach-omap2/omap_phy_internal.c
+++ b/arch/arm/mach-omap2/omap_phy_internal.c
@@ -29,6 +29,8 @@
#include <linux/usb.h>
#include <plat/usb.h>
+
+#include "soc.h"
#include "control.h"
/* OMAP control module register for UTMI PHY */
diff --git a/arch/arm/mach-omap2/opp2420_data.c b/arch/arm/mach-omap2/opp2420_data.c
index 5037e76e4e2..a9e8cf21705 100644
--- a/arch/arm/mach-omap2/opp2420_data.c
+++ b/arch/arm/mach-omap2/opp2420_data.c
@@ -28,7 +28,7 @@
* http://repository.maemo.org/pool/diablo/free/k/kernel-source-diablo/
*/
-#include <plat/hardware.h>
+#include <linux/kernel.h>
#include "opp2xxx.h"
#include "sdrc.h"
diff --git a/arch/arm/mach-omap2/opp2430_data.c b/arch/arm/mach-omap2/opp2430_data.c
index 750805c528d..0e75ec3e114 100644
--- a/arch/arm/mach-omap2/opp2430_data.c
+++ b/arch/arm/mach-omap2/opp2430_data.c
@@ -26,7 +26,7 @@
* This is technically part of the OMAP2xxx clock code.
*/
-#include <plat/hardware.h>
+#include <linux/kernel.h>
#include "opp2xxx.h"
#include "sdrc.h"
diff --git a/arch/arm/mach-omap2/opp3xxx_data.c b/arch/arm/mach-omap2/opp3xxx_data.c
index d95f3f945d4..75cef5f67a8 100644
--- a/arch/arm/mach-omap2/opp3xxx_data.c
+++ b/arch/arm/mach-omap2/opp3xxx_data.c
@@ -19,8 +19,6 @@
*/
#include <linux/module.h>
-#include <plat/cpu.h>
-
#include "control.h"
#include "omap_opp_data.h"
#include "pm.h"
diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c
index c95415da23c..a9fd6d5fe79 100644
--- a/arch/arm/mach-omap2/opp4xxx_data.c
+++ b/arch/arm/mach-omap2/opp4xxx_data.c
@@ -20,8 +20,7 @@
*/
#include <linux/module.h>
-#include <plat/cpu.h>
-
+#include "soc.h"
#include "control.h"
#include "omap_opp_data.h"
#include "pm.h"
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 814bcd90159..3e1345fc071 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -28,7 +28,6 @@
#include <linux/slab.h>
#include <plat/clock.h>
-#include <plat/board.h>
#include "powerdomain.h"
#include "clockdomain.h"
#include <plat/dmtimer.h>
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index 2edeffc923a..8af6cd6ac33 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -29,6 +29,7 @@
#include <linux/irq.h>
#include <linux/time.h>
#include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
@@ -38,9 +39,6 @@
#include <plat/clock.h>
#include <plat/sram.h>
#include <plat/dma.h>
-#include <plat/board.h>
-
-#include <mach/irqs.h>
#include "common.h"
#include "prm2xxx_3xxx.h"
@@ -352,16 +350,6 @@ int __init omap2_pm_init(void)
prcm_setup_regs();
- /* Hack to prevent MPU retention when STI console is enabled. */
- {
- const struct omap_sti_console_config *sti;
-
- sti = omap_get_config(OMAP_TAG_STI_CONSOLE,
- struct omap_sti_console_config);
- if (sti != NULL && sti->enable)
- sti_console_enabled = 1;
- }
-
/*
* We copy the assembler sleep/wakeup routines to SRAM.
* These routines need to be in SRAM as that's the only
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 05bd8f02723..90480f75997 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -28,6 +28,8 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/slab.h>
+#include <linux/platform_data/gpio-omap.h>
+
#include <trace/events/power.h>
#include <asm/suspend.h>
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 69b36e185e9..ca5be83d501 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -28,11 +28,13 @@
#include "prm44xx.h"
#include <asm/cpu.h>
-#include <plat/cpu.h>
+
+#include <plat/prcm.h>
+
#include "powerdomain.h"
#include "clockdomain.h"
-#include <plat/prcm.h>
+#include "soc.h"
#include "pm.h"
#define PWRDM_TRACE_STATES_FLAG (1<<31)
diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c
index bb883e46307..8b23d234fb5 100644
--- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
@@ -15,11 +15,9 @@
#include <linux/init.h>
#include <linux/bug.h>
-#include <plat/cpu.h>
-
+#include "soc.h"
#include "powerdomain.h"
#include "powerdomains2xxx_3xxx_data.h"
-
#include "prcm-common.h"
#include "prm2xxx_3xxx.h"
#include "prm-regbits-34xx.h"
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index 053e24ed3c4..9c9d23c1020 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -27,7 +27,6 @@
#include "common.h"
#include <plat/prcm.h>
-#include <plat/irqs.h>
#include "clock.h"
#include "clock2xxx.h"
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
index a0309dea679..9529984d8d2 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -17,11 +17,10 @@
#include <linux/io.h>
#include <linux/irq.h>
-#include "common.h"
-#include <plat/cpu.h>
#include <plat/prcm.h>
-#include <plat/irqs.h>
+#include "soc.h"
+#include "common.h"
#include "vp.h"
#include "prm2xxx_3xxx.h"
@@ -40,7 +39,7 @@ static struct omap_prcm_irq_setup omap3_prcm_irq_setup = {
.nr_regs = 1,
.irqs = omap3_prcm_irqs,
.nr_irqs = ARRAY_SIZE(omap3_prcm_irqs),
- .irq = INT_34XX_PRCM_MPU_IRQ,
+ .irq = 11 + OMAP_INTC_START,
.read_pending_irqs = &omap3xxx_prm_read_pending_irqs,
.ocp_barrier = &omap3xxx_prm_ocp_barrier,
.save_and_clear_irqen = &omap3xxx_prm_save_and_clear_irqen,
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index bb727c2d933..f0c4d5f4a17 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -17,10 +17,9 @@
#include <linux/err.h>
#include <linux/io.h>
-#include <plat/cpu.h>
-#include <plat/irqs.h>
#include <plat/prcm.h>
+#include "soc.h"
#include "iomap.h"
#include "common.h"
#include "vp.h"
@@ -40,7 +39,7 @@ static struct omap_prcm_irq_setup omap4_prcm_irq_setup = {
.nr_regs = 2,
.irqs = omap4_prcm_irqs,
.nr_irqs = ARRAY_SIZE(omap4_prcm_irqs),
- .irq = OMAP44XX_IRQ_PRCM,
+ .irq = 11 + OMAP44XX_IRQ_GIC_START,
.read_pending_irqs = &omap44xx_prm_read_pending_irqs,
.ocp_barrier = &omap44xx_prm_ocp_barrier,
.save_and_clear_irqen = &omap44xx_prm_save_and_clear_irqen,
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 03b126d9ad9..6b4d332be2f 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -26,7 +26,6 @@
#include <plat/common.h>
#include <plat/prcm.h>
-#include <plat/irqs.h>
#include "prm2xxx_3xxx.h"
#include "prm44xx.h"
diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c
index 1133bb2f632..73e55e48532 100644
--- a/arch/arm/mach-omap2/sdrc2xxx.c
+++ b/arch/arm/mach-omap2/sdrc2xxx.c
@@ -24,11 +24,11 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/hardware.h>
#include <plat/clock.h>
#include <plat/sram.h>
#include <plat/sdrc.h>
+#include "soc.h"
#include "iomap.h"
#include "common.h"
#include "prm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index c1b93c752d7..7ca266e987f 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -29,11 +29,11 @@
#include <plat/omap-serial.h>
#include "common.h"
-#include <plat/board.h>
#include <plat/dma.h>
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
#include <plat/omap-pm.h>
+#include <plat/serial.h>
#include "prm2xxx_3xxx.h"
#include "pm.h"
@@ -81,8 +81,9 @@ static struct omap_uart_port_info omap_serial_default_info[] __initdata = {
};
#ifdef CONFIG_PM
-static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable)
+static void omap_uart_enable_wakeup(struct device *dev, bool enable)
{
+ struct platform_device *pdev = to_platform_device(dev);
struct omap_device *od = to_omap_device(pdev);
if (!od)
@@ -99,15 +100,17 @@ static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable)
* in Smartidle Mode When Configured for DMA Operations.
* WA: configure uart in force idle mode.
*/
-static void omap_uart_set_noidle(struct platform_device *pdev)
+static void omap_uart_set_noidle(struct device *dev)
{
+ struct platform_device *pdev = to_platform_device(dev);
struct omap_device *od = to_omap_device(pdev);
omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO);
}
-static void omap_uart_set_smartidle(struct platform_device *pdev)
+static void omap_uart_set_smartidle(struct device *dev)
{
+ struct platform_device *pdev = to_platform_device(dev);
struct omap_device *od = to_omap_device(pdev);
u8 idlemode;
@@ -120,10 +123,10 @@ static void omap_uart_set_smartidle(struct platform_device *pdev)
}
#else
-static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable)
+static void omap_uart_enable_wakeup(struct device *dev, bool enable)
{}
-static void omap_uart_set_noidle(struct platform_device *pdev) {}
-static void omap_uart_set_smartidle(struct platform_device *pdev) {}
+static void omap_uart_set_noidle(struct device *dev) {}
+static void omap_uart_set_smartidle(struct device *dev) {}
#endif /* CONFIG_PM */
#ifdef CONFIG_OMAP_MUX
@@ -304,6 +307,9 @@ void __init omap_serial_init_port(struct omap_board_data *bdata,
omap_up.dma_rx_timeout = info->dma_rx_timeout;
omap_up.dma_rx_poll_rate = info->dma_rx_poll_rate;
omap_up.autosuspend_timeout = info->autosuspend_timeout;
+ omap_up.DTR_gpio = info->DTR_gpio;
+ omap_up.DTR_inverted = info->DTR_inverted;
+ omap_up.DTR_present = info->DTR_present;
pdata = &omap_up;
pdata_size = sizeof(struct omap_uart_port_info);
diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S
index d4bf904d84a..ce0ccd26efb 100644
--- a/arch/arm/mach-omap2/sleep24xx.S
+++ b/arch/arm/mach-omap2/sleep24xx.S
@@ -28,8 +28,7 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <plat/omap24xx.h>
-
+#include "omap24xx.h"
#include "sdrc.h"
/* First address of reserved address space? apparently valid for OMAP2 & 3 */
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index 1f62f23673f..506987979c1 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -26,9 +26,9 @@
#include <asm/assembler.h>
-#include <plat/hardware.h>
#include <plat/sram.h>
+#include "omap34xx.h"
#include "iomap.h"
#include "cm2xxx_3xxx.h"
#include "prm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S
index 91e71d8f46f..b7d8ead4b86 100644
--- a/arch/arm/mach-omap2/sleep44xx.S
+++ b/arch/arm/mach-omap2/sleep44xx.S
@@ -14,10 +14,10 @@
#include <asm/memory.h>
#include <asm/hardware/cache-l2x0.h>
-#include <plat/omap44xx.h>
#include <mach/omap-secure.h>
#include "common.h"
+#include "omap44xx.h"
#include "omap4-sar-layout.h"
#if defined(CONFIG_SMP) && defined(CONFIG_PM)
diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h
new file mode 100644
index 00000000000..fc9b96daf85
--- /dev/null
+++ b/arch/arm/mach-omap2/soc.h
@@ -0,0 +1,7 @@
+#include <plat/cpu.h>
+#include "omap24xx.h"
+#include "omap34xx.h"
+#include "omap44xx.h"
+#include "ti81xx.h"
+#include "am33xx.h"
+#include "omap54xx.h"
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index ee0bfcc1410..8f7326cd435 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -32,8 +32,7 @@
#include <asm/assembler.h>
-#include <mach/hardware.h>
-
+#include "soc.h"
#include "iomap.h"
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
index d4d39ef0476..b140d657852 100644
--- a/arch/arm/mach-omap2/sram243x.S
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -32,8 +32,7 @@
#include <asm/assembler.h>
-#include <mach/hardware.h>
-
+#include "soc.h"
#include "iomap.h"
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index df5a21322b0..2d0ceaa23fb 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -29,8 +29,7 @@
#include <asm/assembler.h>
-#include <mach/hardware.h>
-
+#include "soc.h"
#include "iomap.h"
#include "sdrc.h"
#include "cm2xxx_3xxx.h"
diff --git a/arch/arm/plat-omap/include/plat/ti81xx.h b/arch/arm/mach-omap2/ti81xx.h
index 8f9843f7842..8f9843f7842 100644
--- a/arch/arm/plat-omap/include/plat/ti81xx.h
+++ b/arch/arm/mach-omap2/ti81xx.h
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 2ff6d41ec6c..e2084facca5 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -36,16 +36,19 @@
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/slab.h>
+#include <linux/of.h>
#include <asm/mach/time.h>
-#include <plat/dmtimer.h>
#include <asm/smp_twd.h>
#include <asm/sched_clock.h>
-#include "common.h"
+
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
+#include <plat/dmtimer.h>
#include <plat/omap-pm.h>
+#include "soc.h"
+#include "common.h"
#include "powerdomain.h"
/* Parent clocks, eventually these will come from the clock framework */
@@ -373,8 +376,7 @@ OMAP_SYS_TIMER(3_am33xx)
#ifdef CONFIG_ARCH_OMAP4
#ifdef CONFIG_LOCAL_TIMERS
static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
- OMAP44XX_LOCAL_TWD_BASE,
- OMAP44XX_IRQ_LOCALTIMER);
+ OMAP44XX_LOCAL_TWD_BASE, 29 + OMAP_INTC_START);
#endif
static void __init omap4_timer_init(void)
@@ -386,6 +388,11 @@ static void __init omap4_timer_init(void)
if (omap_rev() != OMAP4430_REV_ES1_0) {
int err;
+ if (of_have_populated_dt()) {
+ twd_local_timer_of_register();
+ return;
+ }
+
err = twd_local_timer_register(&twd_local_timer);
if (err)
pr_err("twd_local_timer_register failed %d\n", err);
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index db5ff664237..99be94e9454 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -29,6 +29,7 @@
#include <plat/i2c.h>
#include <plat/usb.h>
+#include "soc.h"
#include "twl-common.h"
#include "pm.h"
#include "voltage.h"
@@ -84,7 +85,7 @@ void __init omap4_pmic_init(const char *pmic_type,
omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
strncpy(omap4_i2c1_board_info[0].type, pmic_type,
sizeof(omap4_i2c1_board_info[0].type));
- omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N;
+ omap4_i2c1_board_info[0].irq = 7 + OMAP44XX_IRQ_GIC_START;
omap4_i2c1_board_info[0].platform_data = pmic_data;
/* TWL6040 audio IC part */
diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h
index 8fe71cfd002..d109c09ef34 100644
--- a/arch/arm/mach-omap2/twl-common.h
+++ b/arch/arm/mach-omap2/twl-common.h
@@ -1,7 +1,7 @@
#ifndef __OMAP_PMIC_COMMON__
#define __OMAP_PMIC_COMMON__
-#include <plat/irqs.h>
+#include "common.h"
#define TWL_COMMON_PDATA_USB (1 << 0)
#define TWL_COMMON_PDATA_BCI (1 << 1)
@@ -40,13 +40,13 @@ void omap_pmic_late_init(void);
static inline void omap2_pmic_init(const char *pmic_type,
struct twl4030_platform_data *pmic_data)
{
- omap_pmic_init(2, 2600, pmic_type, INT_24XX_SYS_NIRQ, pmic_data);
+ omap_pmic_init(2, 2600, pmic_type, 7 + OMAP_INTC_START, pmic_data);
}
static inline void omap3_pmic_init(const char *pmic_type,
struct twl4030_platform_data *pmic_data)
{
- omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data);
+ omap_pmic_init(1, 2600, pmic_type, 7 + OMAP_INTC_START, pmic_data);
}
void omap4_pmic_init(const char *pmic_type,
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index dde8a11f47d..ac95daaa470 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -25,8 +25,6 @@
#include <asm/io.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
#include <plat/usb.h>
#include <plat/omap_device.h>
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index c4a57685666..89150b2435e 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -23,14 +23,13 @@
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
-
#include <linux/usb/musb.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/am35xx.h>
#include <plat/usb.h>
#include <plat/omap_device.h>
+
+#include <mach/am35xx.h>
+
#include "mux.h"
static struct musb_hdrc_config musb_config = {
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index 84da34f9a7c..b451f3c1329 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -12,8 +12,7 @@
#include <linux/init.h>
#include <linux/bug.h>
-#include <plat/cpu.h>
-
+#include "soc.h"
#include "voltage.h"
#include "vc.h"
#include "prm-regbits-34xx.h"
diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
index d0103c80d04..63afbfed3cb 100644
--- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
@@ -18,9 +18,8 @@
#include <linux/err.h>
#include <linux/init.h>
+#include "soc.h"
#include "common.h"
-#include <plat/cpu.h>
-
#include "prm-regbits-34xx.h"
#include "omap_opp_data.h"
#include "voltage.h"
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index cf10f92856d..453a6e50db8 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -520,13 +520,14 @@ static struct platform_device hdmi_lcdc_device = {
};
/* GPIO KEY */
-#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
+#define GPIO_KEY(c, g, d, ...) \
+ { .code = c, .gpio = g, .desc = d, .active_low = 1, __VA_ARGS__ }
static struct gpio_keys_button gpio_buttons[] = {
- GPIO_KEY(KEY_POWER, GPIO_PORT99, "SW1"),
- GPIO_KEY(KEY_BACK, GPIO_PORT100, "SW2"),
- GPIO_KEY(KEY_MENU, GPIO_PORT97, "SW3"),
- GPIO_KEY(KEY_HOME, GPIO_PORT98, "SW4"),
+ GPIO_KEY(KEY_POWER, GPIO_PORT99, "SW3", .wakeup = 1),
+ GPIO_KEY(KEY_BACK, GPIO_PORT100, "SW4"),
+ GPIO_KEY(KEY_MENU, GPIO_PORT97, "SW5"),
+ GPIO_KEY(KEY_HOME, GPIO_PORT98, "SW6"),
};
static struct gpio_keys_platform_data gpio_key_info = {
@@ -901,8 +902,8 @@ static struct platform_device *eva_devices[] __initdata = {
&camera_device,
&ceu0_device,
&fsi_device,
- &fsi_hdmi_device,
&fsi_wm8978_device,
+ &fsi_hdmi_device,
};
static void __init eva_clock_init(void)
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 7ea2b31e319..c129542f6ae 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -695,6 +695,7 @@ static struct platform_device usbhs0_device = {
* - J30 "open"
* - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET
* - add .get_vbus = usbhs_get_vbus in usbhs1_private
+ * - check usbhs0_device(pio)/usbhs1_device(irq) order in mackerel_devices.
*/
#define IRQ8 evt2irq(0x0300)
#define USB_PHY_MODE (1 << 4)
@@ -1325,8 +1326,8 @@ static struct platform_device *mackerel_devices[] __initdata = {
&nor_flash_device,
&smc911x_device,
&lcdc_device,
- &usbhs1_device,
&usbhs0_device,
+ &usbhs1_device,
&leds_device,
&fsi_device,
&fsi_ak4643_device,
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index 3a528cf4366..fcf5a47f477 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -67,7 +67,7 @@ static struct smsc911x_platform_config smsc911x_platdata = {
static struct platform_device eth_device = {
.name = "smsc911x",
- .id = 0,
+ .id = -1,
.dev = {
.platform_data = &smsc911x_platdata,
},
diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
index ee447404c85..588555a67d9 100644
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ b/arch/arm/mach-shmobile/intc-sh73a0.c
@@ -259,9 +259,9 @@ static int sh73a0_set_wake(struct irq_data *data, unsigned int on)
return 0; /* always allow wakeup */
}
-#define RELOC_BASE 0x1000
+#define RELOC_BASE 0x1200
-/* INTCA IRQ pins at INTCS + 0x1000 to make space for GIC+INTC handling */
+/* INTCA IRQ pins at INTCS + RELOC_BASE to make space for GIC+INTC handling */
#define INTCS_VECT_RELOC(n, vect) INTCS_VECT((n), (vect) + RELOC_BASE)
INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000,
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index a534d8880de..1d2e3c6f8b5 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -524,33 +524,12 @@ static struct stedma40_chan_cfg uart2_dma_cfg_tx = {
};
#endif
-#define PRCC_K_SOFTRST_SET 0x18
-#define PRCC_K_SOFTRST_CLEAR 0x1C
-static void ux500_uart0_reset(void)
-{
- void __iomem *prcc_rst_set, *prcc_rst_clr;
-
- prcc_rst_set = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
- PRCC_K_SOFTRST_SET);
- prcc_rst_clr = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
- PRCC_K_SOFTRST_CLEAR);
-
- /* Activate soft reset PRCC_K_SOFTRST_CLEAR */
- writel((readl(prcc_rst_clr) | 0x1), prcc_rst_clr);
- udelay(1);
-
- /* Release soft reset PRCC_K_SOFTRST_SET */
- writel((readl(prcc_rst_set) | 0x1), prcc_rst_set);
- udelay(1);
-}
-
static struct amba_pl011_data uart0_plat = {
#ifdef CONFIG_STE_DMA40
.dma_filter = stedma40_filter,
.dma_rx_param = &uart0_dma_cfg_rx,
.dma_tx_param = &uart0_dma_cfg_tx,
#endif
- .reset = ux500_uart0_reset,
};
static struct amba_pl011_data uart1_plat = {
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 4e7d1182e8a..051204fc461 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -267,17 +267,19 @@ static void __dma_free_remap(void *cpu_addr, size_t size)
vunmap(cpu_addr);
}
+#define DEFAULT_DMA_COHERENT_POOL_SIZE SZ_256K
+
struct dma_pool {
size_t size;
spinlock_t lock;
unsigned long *bitmap;
unsigned long nr_pages;
void *vaddr;
- struct page *page;
+ struct page **pages;
};
static struct dma_pool atomic_pool = {
- .size = SZ_256K,
+ .size = DEFAULT_DMA_COHERENT_POOL_SIZE,
};
static int __init early_coherent_pool(char *p)
@@ -287,6 +289,21 @@ static int __init early_coherent_pool(char *p)
}
early_param("coherent_pool", early_coherent_pool);
+void __init init_dma_coherent_pool_size(unsigned long size)
+{
+ /*
+ * Catch any attempt to set the pool size too late.
+ */
+ BUG_ON(atomic_pool.vaddr);
+
+ /*
+ * Set architecture specific coherent pool size only if
+ * it has not been changed by kernel command line parameter.
+ */
+ if (atomic_pool.size == DEFAULT_DMA_COHERENT_POOL_SIZE)
+ atomic_pool.size = size;
+}
+
/*
* Initialise the coherent pool for atomic allocations.
*/
@@ -297,6 +314,7 @@ static int __init atomic_pool_init(void)
unsigned long nr_pages = pool->size >> PAGE_SHIFT;
unsigned long *bitmap;
struct page *page;
+ struct page **pages;
void *ptr;
int bitmap_size = BITS_TO_LONGS(nr_pages) * sizeof(long);
@@ -304,21 +322,31 @@ static int __init atomic_pool_init(void)
if (!bitmap)
goto no_bitmap;
+ pages = kzalloc(nr_pages * sizeof(struct page *), GFP_KERNEL);
+ if (!pages)
+ goto no_pages;
+
if (IS_ENABLED(CONFIG_CMA))
ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page);
else
ptr = __alloc_remap_buffer(NULL, pool->size, GFP_KERNEL, prot,
&page, NULL);
if (ptr) {
+ int i;
+
+ for (i = 0; i < nr_pages; i++)
+ pages[i] = page + i;
+
spin_lock_init(&pool->lock);
pool->vaddr = ptr;
- pool->page = page;
+ pool->pages = pages;
pool->bitmap = bitmap;
pool->nr_pages = nr_pages;
pr_info("DMA: preallocated %u KiB pool for atomic coherent allocations\n",
(unsigned)pool->size / 1024);
return 0;
}
+no_pages:
kfree(bitmap);
no_bitmap:
pr_err("DMA: failed to allocate %u KiB pool for atomic coherent allocation\n",
@@ -443,27 +471,45 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page)
if (pageno < pool->nr_pages) {
bitmap_set(pool->bitmap, pageno, count);
ptr = pool->vaddr + PAGE_SIZE * pageno;
- *ret_page = pool->page + pageno;
+ *ret_page = pool->pages[pageno];
+ } else {
+ pr_err_once("ERROR: %u KiB atomic DMA coherent pool is too small!\n"
+ "Please increase it with coherent_pool= kernel parameter!\n",
+ (unsigned)pool->size / 1024);
}
spin_unlock_irqrestore(&pool->lock, flags);
return ptr;
}
+static bool __in_atomic_pool(void *start, size_t size)
+{
+ struct dma_pool *pool = &atomic_pool;
+ void *end = start + size;
+ void *pool_start = pool->vaddr;
+ void *pool_end = pool->vaddr + pool->size;
+
+ if (start < pool_start || start > pool_end)
+ return false;
+
+ if (end <= pool_end)
+ return true;
+
+ WARN(1, "Wrong coherent size(%p-%p) from atomic pool(%p-%p)\n",
+ start, end - 1, pool_start, pool_end - 1);
+
+ return false;
+}
+
static int __free_from_pool(void *start, size_t size)
{
struct dma_pool *pool = &atomic_pool;
unsigned long pageno, count;
unsigned long flags;
- if (start < pool->vaddr || start > pool->vaddr + pool->size)
+ if (!__in_atomic_pool(start, size))
return 0;
- if (start + size > pool->vaddr + pool->size) {
- WARN(1, "freeing wrong coherent size from pool\n");
- return 0;
- }
-
pageno = (start - pool->vaddr) >> PAGE_SHIFT;
count = size >> PAGE_SHIFT;
@@ -1090,10 +1136,22 @@ static int __iommu_remove_mapping(struct device *dev, dma_addr_t iova, size_t si
return 0;
}
+static struct page **__atomic_get_pages(void *addr)
+{
+ struct dma_pool *pool = &atomic_pool;
+ struct page **pages = pool->pages;
+ int offs = (addr - pool->vaddr) >> PAGE_SHIFT;
+
+ return pages + offs;
+}
+
static struct page **__iommu_get_pages(void *cpu_addr, struct dma_attrs *attrs)
{
struct vm_struct *area;
+ if (__in_atomic_pool(cpu_addr, PAGE_SIZE))
+ return __atomic_get_pages(cpu_addr);
+
if (dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs))
return cpu_addr;
@@ -1103,6 +1161,34 @@ static struct page **__iommu_get_pages(void *cpu_addr, struct dma_attrs *attrs)
return NULL;
}
+static void *__iommu_alloc_atomic(struct device *dev, size_t size,
+ dma_addr_t *handle)
+{
+ struct page *page;
+ void *addr;
+
+ addr = __alloc_from_pool(size, &page);
+ if (!addr)
+ return NULL;
+
+ *handle = __iommu_create_mapping(dev, &page, size);
+ if (*handle == DMA_ERROR_CODE)
+ goto err_mapping;
+
+ return addr;
+
+err_mapping:
+ __free_from_pool(addr, size);
+ return NULL;
+}
+
+static void __iommu_free_atomic(struct device *dev, struct page **pages,
+ dma_addr_t handle, size_t size)
+{
+ __iommu_remove_mapping(dev, handle, size);
+ __free_from_pool(page_address(pages[0]), size);
+}
+
static void *arm_iommu_alloc_attrs(struct device *dev, size_t size,
dma_addr_t *handle, gfp_t gfp, struct dma_attrs *attrs)
{
@@ -1113,6 +1199,9 @@ static void *arm_iommu_alloc_attrs(struct device *dev, size_t size,
*handle = DMA_ERROR_CODE;
size = PAGE_ALIGN(size);
+ if (gfp & GFP_ATOMIC)
+ return __iommu_alloc_atomic(dev, size, handle);
+
pages = __iommu_alloc_buffer(dev, size, gfp);
if (!pages)
return NULL;
@@ -1179,6 +1268,11 @@ void arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr,
return;
}
+ if (__in_atomic_pool(cpu_addr, size)) {
+ __iommu_free_atomic(dev, pages, handle, size);
+ return;
+ }
+
if (!dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs)) {
unmap_kernel_range((unsigned long)cpu_addr, size);
vunmap(cpu_addr);
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index dd36eba9506..d15a4a6d614 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -25,6 +25,7 @@ config ARCH_OMAP2PLUS
bool "TI OMAP2/3/4"
select CLKDEV_LOOKUP
select GENERIC_IRQ_CHIP
+ select SPARSE_IRQ
select OMAP_DM_TIMER
select USE_OF
select PROC_DEVICETREE if PROC_FS
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 961bf859bc0..a017e994e00 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -3,8 +3,7 @@
#
# Common support
-obj-y := common.o sram.o clock.o devices.o dma.o mux.o \
- fb.o counter_32k.o
+obj-y := common.o sram.o clock.o dma.o mux.o fb.o counter_32k.o
obj-m :=
obj-n :=
obj- :=
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 89a3723b353..e5778ed689d 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -17,52 +17,12 @@
#include <linux/dma-mapping.h>
#include <plat/common.h>
-#include <plat/board.h>
#include <plat/vram.h>
#include <plat/dsp.h>
#include <plat/dma.h>
#include <plat/omap-secure.h>
-
-#define NO_LENGTH_CHECK 0xffffffff
-
-struct omap_board_config_kernel *omap_board_config __initdata;
-int omap_board_config_size;
-
-static const void *__init get_config(u16 tag, size_t len,
- int skip, size_t *len_out)
-{
- struct omap_board_config_kernel *kinfo = NULL;
- int i;
-
- /* Try to find the config from the board-specific structures
- * in the kernel. */
- for (i = 0; i < omap_board_config_size; i++) {
- if (omap_board_config[i].tag == tag) {
- if (skip == 0) {
- kinfo = &omap_board_config[i];
- break;
- } else {
- skip--;
- }
- }
- }
- if (kinfo == NULL)
- return NULL;
- return kinfo->data;
-}
-
-const void *__init __omap_get_config(u16 tag, size_t len, int nr)
-{
- return get_config(tag, len, nr, NULL);
-}
-
-const void *__init omap_get_var_config(u16 tag, size_t *len)
-{
- return get_config(tag, NO_LENGTH_CHECK, 0, len);
-}
-
void __init omap_reserve(void)
{
omap_vram_reserve_sdram_memblock();
diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c
index dbf1e03029a..2e826f1faf7 100644
--- a/arch/arm/plat-omap/counter_32k.c
+++ b/arch/arm/plat-omap/counter_32k.c
@@ -22,10 +22,7 @@
#include <asm/mach/time.h>
#include <asm/sched_clock.h>
-#include <plat/hardware.h>
#include <plat/common.h>
-#include <plat/board.h>
-
#include <plat/clock.h>
/* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */
diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c
index caa1f7b6cc2..c7a4c0902b3 100644
--- a/arch/arm/plat-omap/debug-devices.c
+++ b/arch/arm/plat-omap/debug-devices.c
@@ -17,9 +17,6 @@
#include <mach/hardware.h>
-#include <plat/board.h>
-
-
/* Many OMAP development platforms reuse the same "debug board"; these
* platforms include H2, H3, H4, and Perseus2.
*/
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index 39407cbe34c..195aaae6587 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -12,6 +12,7 @@
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/io.h>
+#include <linux/platform_data/gpio-omap.h>
#include <mach/hardware.h>
#include <asm/leds.h>
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
deleted file mode 100644
index 1cba9273d2c..00000000000
--- a/arch/arm/plat-omap/devices.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * linux/arch/arm/plat-omap/devices.c
- *
- * Common platform device setup/initialization for OMAP1 and OMAP2
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/gpio.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/memblock.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-#include <asm/memblock.h>
-
-#include <plat/tc.h>
-#include <plat/board.h>
-#include <plat/mmc.h>
-#include <plat/menelaus.h>
-#include <plat/omap44xx.h>
-
-/*-------------------------------------------------------------------------*/
-
-#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE)
-
-#ifdef CONFIG_ARCH_OMAP2
-#define OMAP_RNG_BASE 0x480A0000
-#else
-#define OMAP_RNG_BASE 0xfffe5000
-#endif
-
-static struct resource rng_resources[] = {
- {
- .start = OMAP_RNG_BASE,
- .end = OMAP_RNG_BASE + 0x4f,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device omap_rng_device = {
- .name = "omap_rng",
- .id = -1,
- .num_resources = ARRAY_SIZE(rng_resources),
- .resource = rng_resources,
-};
-
-static void omap_init_rng(void)
-{
- (void) platform_device_register(&omap_rng_device);
-}
-#else
-static inline void omap_init_rng(void) {}
-#endif
-
-/*
- * This gets called after board-specific INIT_MACHINE, and initializes most
- * on-chip peripherals accessible on this board (except for few like USB):
- *
- * (a) Does any "standard config" pin muxing needed. Board-specific
- * code will have muxed GPIO pins and done "nonstandard" setup;
- * that code could live in the boot loader.
- * (b) Populating board-specific platform_data with the data drivers
- * rely on to handle wiring variations.
- * (c) Creating platform devices as meaningful on this board and
- * with this kernel configuration.
- *
- * Claiming GPIOs, and setting their direction and initial values, is the
- * responsibility of the device drivers. So is responding to probe().
- *
- * Board-specific knowledge like creating devices or pin setup is to be
- * kept out of drivers as much as possible. In particular, pin setup
- * may be handled by the boot loader, and drivers should expect it will
- * normally have been done by the time they're probed.
- */
-static int __init omap_init_devices(void)
-{
- /* please keep these calls, and their implementations above,
- * in alphabetical order so they're easier to sort through.
- */
- omap_init_rng();
- return 0;
-}
-arch_initcall(omap_init_devices);
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 7fe626761e5..6dcad5873d5 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -36,9 +36,8 @@
#include <linux/slab.h>
#include <linux/delay.h>
-#include <mach/hardware.h>
+#include <plat/cpu.h>
#include <plat/dma.h>
-
#include <plat/tc.h>
/*
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index dd6f92c99e5..bcbb9d5dc29 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -33,8 +33,6 @@
#include <mach/hardware.h>
#include <asm/mach/map.h>
-#include <plat/board.h>
-
#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
static bool omapfb_lcd_configured;
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index db071bc71c4..40bc06a7ac4 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -39,6 +39,7 @@
#define OMAP_I2C_SIZE 0x3f
#define OMAP1_I2C_BASE 0xfffb3800
+#define OMAP1_INT_I2C (32 + 4)
static const char name[] = "omap_i2c";
@@ -105,7 +106,7 @@ static inline int omap1_i2c_add_bus(int bus_id)
res = pdev->resource;
res[0].start = OMAP1_I2C_BASE;
res[0].end = res[0].start + OMAP_I2C_SIZE;
- res[1].start = INT_I2C;
+ res[1].start = OMAP1_INT_I2C;
pdata = &i2c_pdata[bus_id - 1];
/* all OMAP1 have IP version 1 register set */
diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h
deleted file mode 100644
index e62f20a5c0a..00000000000
--- a/arch/arm/plat-omap/include/plat/board.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board.h
- *
- * Information structures for board-specific data
- *
- * Copyright (C) 2004 Nokia Corporation
- * Written by Juha Yrjölä <juha.yrjola@nokia.com>
- */
-
-#ifndef _OMAP_BOARD_H
-#define _OMAP_BOARD_H
-
-#include <linux/types.h>
-
-#include <plat/gpio-switch.h>
-
-/*
- * OMAP35x EVM revision
- * Run time detection of EVM revision is done by reading Ethernet
- * PHY ID -
- * GEN_1 = 0x01150000
- * GEN_2 = 0x92200000
- */
-enum {
- OMAP3EVM_BOARD_GEN_1 = 0, /* EVM Rev between A - D */
- OMAP3EVM_BOARD_GEN_2, /* EVM Rev >= Rev E */
-};
-
-/* Different peripheral ids */
-#define OMAP_TAG_CLOCK 0x4f01
-#define OMAP_TAG_GPIO_SWITCH 0x4f06
-#define OMAP_TAG_STI_CONSOLE 0x4f09
-#define OMAP_TAG_CAMERA_SENSOR 0x4f0a
-
-#define OMAP_TAG_BOOT_REASON 0x4f80
-#define OMAP_TAG_FLASH_PART 0x4f81
-#define OMAP_TAG_VERSION_STR 0x4f82
-
-struct omap_clock_config {
- /* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
- u8 system_clock_type;
-};
-
-struct omap_serial_console_config {
- u8 console_uart;
- u32 console_speed;
-};
-
-struct omap_sti_console_config {
- unsigned enable:1;
- u8 channel;
-};
-
-struct omap_camera_sensor_config {
- u16 reset_gpio;
- int (*power_on)(void * data);
- int (*power_off)(void * data);
-};
-
-struct omap_lcd_config {
- char panel_name[16];
- char ctrl_name[16];
- s16 nreset_gpio;
- u8 data_lines;
-};
-
-struct device;
-struct fb_info;
-struct omap_backlight_config {
- int default_intensity;
- int (*set_power)(struct device *dev, int state);
-};
-
-struct omap_fbmem_config {
- u32 start;
- u32 size;
-};
-
-struct omap_pwm_led_platform_data {
- const char *name;
- int intensity_timer;
- int blink_timer;
- void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off);
-};
-
-struct omap_uart_config {
- /* Bit field of UARTs present; bit 0 --> UART1 */
- unsigned int enabled_uarts;
-};
-
-
-struct omap_flash_part_config {
- char part_table[0];
-};
-
-struct omap_boot_reason_config {
- char reason_str[12];
-};
-
-struct omap_version_config {
- char component[12];
- char version[12];
-};
-
-struct omap_board_config_entry {
- u16 tag;
- u16 len;
- u8 data[0];
-};
-
-struct omap_board_config_kernel {
- u16 tag;
- const void *data;
-};
-
-extern const void *__init __omap_get_config(u16 tag, size_t len, int nr);
-
-#define omap_get_config(tag, type) \
- ((const type *) __omap_get_config((tag), sizeof(type), 0))
-#define omap_get_nr_config(tag, type, nr) \
- ((const type *) __omap_get_config((tag), sizeof(type), (nr)))
-
-extern const void *__init omap_get_var_config(u16 tag, size_t *len);
-
-extern struct omap_board_config_kernel *omap_board_config;
-extern int omap_board_config_size;
-
-
-/* for TI reference platforms sharing the same debug card */
-extern int debug_card_init(u32 addr, unsigned gpio);
-
-/* OMAP3EVM revision */
-#if defined(CONFIG_MACH_OMAP3EVM)
-u8 get_omap3_evm_rev(void);
-#else
-#define get_omap3_evm_rev() (-EINVAL)
-#endif
-#endif
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index bb5d08a70db..67da857783c 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -30,6 +30,8 @@
#ifndef __ASM_ARCH_OMAP_CPU_H
#define __ASM_ARCH_OMAP_CPU_H
+#ifndef __ASSEMBLY__
+
#include <linux/bitops.h>
#include <plat/multi.h>
@@ -493,4 +495,5 @@ OMAP4_HAS_FEATURE(mpu_1ghz, MPU_1GHZ)
OMAP4_HAS_FEATURE(mpu_1_2ghz, MPU_1_2GHZ)
OMAP4_HAS_FEATURE(mpu_1_5ghz, MPU_1_5GHZ)
+#endif /* __ASSEMBLY__ */
#endif
diff --git a/arch/arm/plat-omap/include/plat/debug-devices.h b/arch/arm/plat-omap/include/plat/debug-devices.h
new file mode 100644
index 00000000000..a4edbd2f748
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/debug-devices.h
@@ -0,0 +1,9 @@
+#ifndef _OMAP_DEBUG_DEVICES_H
+#define _OMAP_DEBUG_DEVICES_H
+
+#include <linux/types.h>
+
+/* for TI reference platforms sharing the same debug card */
+extern int debug_card_init(u32 addr, unsigned gpio);
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h
index c5811d4409b..0a87b052f8f 100644
--- a/arch/arm/plat-omap/include/plat/dma.h
+++ b/arch/arm/plat-omap/include/plat/dma.h
@@ -31,6 +31,8 @@
/* Move omap4 specific defines to dma-44xx.h */
#include "dma-44xx.h"
+#define INT_DMA_LCD 25
+
/* DMA channels for omap1 */
#define OMAP_DMA_NO_DEVICE 0
#define OMAP_DMA_MCSI1_TX 1
diff --git a/arch/arm/plat-omap/include/plat/gpio-switch.h b/arch/arm/plat-omap/include/plat/gpio-switch.h
deleted file mode 100644
index 10da0e07c0c..00000000000
--- a/arch/arm/plat-omap/include/plat/gpio-switch.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * GPIO switch definitions
- *
- * Copyright (C) 2006 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_GPIO_SWITCH_H
-#define __ASM_ARCH_OMAP_GPIO_SWITCH_H
-
-#include <linux/types.h>
-
-/* Cover:
- * high -> closed
- * low -> open
- * Connection:
- * high -> connected
- * low -> disconnected
- * Activity:
- * high -> active
- * low -> inactive
- *
- */
-#define OMAP_GPIO_SWITCH_TYPE_COVER 0x0000
-#define OMAP_GPIO_SWITCH_TYPE_CONNECTION 0x0001
-#define OMAP_GPIO_SWITCH_TYPE_ACTIVITY 0x0002
-#define OMAP_GPIO_SWITCH_FLAG_INVERTED 0x0001
-#define OMAP_GPIO_SWITCH_FLAG_OUTPUT 0x0002
-
-struct omap_gpio_switch {
- const char *name;
- s16 gpio;
- unsigned flags:4;
- unsigned type:4;
-
- /* Time in ms to debounce when transitioning from
- * inactive state to active state. */
- u16 debounce_rising;
- /* Same for transition from active to inactive state. */
- u16 debounce_falling;
-
- /* notify board-specific code about state changes */
- void (* notify)(void *data, int state);
- void *notify_data;
-};
-
-/* Call at init time only */
-extern void omap_register_gpio_switches(const struct omap_gpio_switch *tbl,
- int count);
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
index f37764a3607..2e6e2597178 100644
--- a/arch/arm/plat-omap/include/plat/gpmc.h
+++ b/arch/arm/plat-omap/include/plat/gpmc.h
@@ -133,6 +133,25 @@ struct gpmc_timings {
u16 wr_data_mux_bus; /* WRDATAONADMUXBUS */
};
+struct gpmc_nand_regs {
+ void __iomem *gpmc_status;
+ void __iomem *gpmc_nand_command;
+ void __iomem *gpmc_nand_address;
+ void __iomem *gpmc_nand_data;
+ void __iomem *gpmc_prefetch_config1;
+ void __iomem *gpmc_prefetch_config2;
+ void __iomem *gpmc_prefetch_control;
+ void __iomem *gpmc_prefetch_status;
+ void __iomem *gpmc_ecc_config;
+ void __iomem *gpmc_ecc_control;
+ void __iomem *gpmc_ecc_size_config;
+ void __iomem *gpmc_ecc1_result;
+ void __iomem *gpmc_bch_result0;
+};
+
+extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs);
+extern int gpmc_get_client_irq(unsigned irq_config);
+
extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns);
extern unsigned int gpmc_ps_to_ticks(unsigned int time_ps);
extern unsigned int gpmc_ticks_to_ns(unsigned int ticks);
diff --git a/arch/arm/plat-omap/include/plat/hardware.h b/arch/arm/plat-omap/include/plat/hardware.h
deleted file mode 100644
index ddbde38e1e3..00000000000
--- a/arch/arm/plat-omap/include/plat/hardware.h
+++ /dev/null
@@ -1,293 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/hardware.h
- *
- * Hardware definitions for TI OMAP processors and boards
- *
- * NOTE: Please put device driver specific defines into a separate header
- * file for each driver.
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
- *
- * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
- * and Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_HARDWARE_H
-#define __ASM_ARCH_OMAP_HARDWARE_H
-
-#include <asm/sizes.h>
-#ifndef __ASSEMBLER__
-#include <asm/types.h>
-#include <plat/cpu.h>
-#endif
-#include <plat/serial.h>
-
-/*
- * ---------------------------------------------------------------------------
- * Common definitions for all OMAP processors
- * NOTE: Put all processor or board specific parts to the special header
- * files.
- * ---------------------------------------------------------------------------
- */
-
-/*
- * ----------------------------------------------------------------------------
- * Timers
- * ----------------------------------------------------------------------------
- */
-#define OMAP_MPU_TIMER1_BASE (0xfffec500)
-#define OMAP_MPU_TIMER2_BASE (0xfffec600)
-#define OMAP_MPU_TIMER3_BASE (0xfffec700)
-#define MPU_TIMER_FREE (1 << 6)
-#define MPU_TIMER_CLOCK_ENABLE (1 << 5)
-#define MPU_TIMER_AR (1 << 1)
-#define MPU_TIMER_ST (1 << 0)
-
-/*
- * ----------------------------------------------------------------------------
- * Clocks
- * ----------------------------------------------------------------------------
- */
-#define CLKGEN_REG_BASE (0xfffece00)
-#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0)
-#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4)
-#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8)
-#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC)
-#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10)
-#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14)
-#define ARM_SYSST (CLKGEN_REG_BASE + 0x18)
-#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24)
-
-#define CK_RATEF 1
-#define CK_IDLEF 2
-#define CK_ENABLEF 4
-#define CK_SELECTF 8
-#define SETARM_IDLE_SHIFT
-
-/* DPLL control registers */
-#define DPLL_CTL (0xfffecf00)
-
-/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
-#define DSP_CONFIG_REG_BASE IOMEM(0xe1008000)
-#define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0)
-#define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4)
-#define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8)
-#define DSP_RSTCT2 (DSP_CONFIG_REG_BASE + 0x14)
-
-/*
- * ---------------------------------------------------------------------------
- * UPLD
- * ---------------------------------------------------------------------------
- */
-#define ULPD_REG_BASE (0xfffe0800)
-#define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14)
-#define ULPD_SETUP_ANALOG_CELL_3 (ULPD_REG_BASE + 0x24)
-#define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30)
-# define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */
-# define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */
-#define ULPD_SOFT_REQ (ULPD_REG_BASE + 0x34)
-# define SOFT_UDC_REQ (1 << 4)
-# define SOFT_USB_CLK_REQ (1 << 3)
-# define SOFT_DPLL_REQ (1 << 0)
-#define ULPD_DPLL_CTRL (ULPD_REG_BASE + 0x3c)
-#define ULPD_STATUS_REQ (ULPD_REG_BASE + 0x40)
-#define ULPD_APLL_CTRL (ULPD_REG_BASE + 0x4c)
-#define ULPD_POWER_CTRL (ULPD_REG_BASE + 0x50)
-#define ULPD_SOFT_DISABLE_REQ_REG (ULPD_REG_BASE + 0x68)
-# define DIS_MMC2_DPLL_REQ (1 << 11)
-# define DIS_MMC1_DPLL_REQ (1 << 10)
-# define DIS_UART3_DPLL_REQ (1 << 9)
-# define DIS_UART2_DPLL_REQ (1 << 8)
-# define DIS_UART1_DPLL_REQ (1 << 7)
-# define DIS_USB_HOST_DPLL_REQ (1 << 6)
-#define ULPD_SDW_CLK_DIV_CTRL_SEL (ULPD_REG_BASE + 0x74)
-#define ULPD_CAM_CLK_CTRL (ULPD_REG_BASE + 0x7c)
-
-/*
- * ---------------------------------------------------------------------------
- * Watchdog timer
- * ---------------------------------------------------------------------------
- */
-
-/* Watchdog timer within the OMAP3.2 gigacell */
-#define OMAP_MPU_WATCHDOG_BASE (0xfffec800)
-#define OMAP_WDT_TIMER (OMAP_MPU_WATCHDOG_BASE + 0x0)
-#define OMAP_WDT_LOAD_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4)
-#define OMAP_WDT_READ_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4)
-#define OMAP_WDT_TIMER_MODE (OMAP_MPU_WATCHDOG_BASE + 0x8)
-
-/*
- * ---------------------------------------------------------------------------
- * Interrupts
- * ---------------------------------------------------------------------------
- */
-#ifdef CONFIG_ARCH_OMAP1
-
-/*
- * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
- * or something similar.. -- PFM.
- */
-
-#define OMAP_IH1_BASE 0xfffecb00
-#define OMAP_IH2_BASE 0xfffe0000
-
-#define OMAP_IH1_ITR (OMAP_IH1_BASE + 0x00)
-#define OMAP_IH1_MIR (OMAP_IH1_BASE + 0x04)
-#define OMAP_IH1_SIR_IRQ (OMAP_IH1_BASE + 0x10)
-#define OMAP_IH1_SIR_FIQ (OMAP_IH1_BASE + 0x14)
-#define OMAP_IH1_CONTROL (OMAP_IH1_BASE + 0x18)
-#define OMAP_IH1_ILR0 (OMAP_IH1_BASE + 0x1c)
-#define OMAP_IH1_ISR (OMAP_IH1_BASE + 0x9c)
-
-#define OMAP_IH2_ITR (OMAP_IH2_BASE + 0x00)
-#define OMAP_IH2_MIR (OMAP_IH2_BASE + 0x04)
-#define OMAP_IH2_SIR_IRQ (OMAP_IH2_BASE + 0x10)
-#define OMAP_IH2_SIR_FIQ (OMAP_IH2_BASE + 0x14)
-#define OMAP_IH2_CONTROL (OMAP_IH2_BASE + 0x18)
-#define OMAP_IH2_ILR0 (OMAP_IH2_BASE + 0x1c)
-#define OMAP_IH2_ISR (OMAP_IH2_BASE + 0x9c)
-
-#define IRQ_ITR_REG_OFFSET 0x00
-#define IRQ_MIR_REG_OFFSET 0x04
-#define IRQ_SIR_IRQ_REG_OFFSET 0x10
-#define IRQ_SIR_FIQ_REG_OFFSET 0x14
-#define IRQ_CONTROL_REG_OFFSET 0x18
-#define IRQ_ISR_REG_OFFSET 0x9c
-#define IRQ_ILR0_REG_OFFSET 0x1c
-#define IRQ_GMR_REG_OFFSET 0xa0
-
-#endif
-
-/*
- * ----------------------------------------------------------------------------
- * System control registers
- * ----------------------------------------------------------------------------
- */
-#define MOD_CONF_CTRL_0 0xfffe1080
-#define MOD_CONF_CTRL_1 0xfffe1110
-
-/*
- * ----------------------------------------------------------------------------
- * Pin multiplexing registers
- * ----------------------------------------------------------------------------
- */
-#define FUNC_MUX_CTRL_0 0xfffe1000
-#define FUNC_MUX_CTRL_1 0xfffe1004
-#define FUNC_MUX_CTRL_2 0xfffe1008
-#define COMP_MODE_CTRL_0 0xfffe100c
-#define FUNC_MUX_CTRL_3 0xfffe1010
-#define FUNC_MUX_CTRL_4 0xfffe1014
-#define FUNC_MUX_CTRL_5 0xfffe1018
-#define FUNC_MUX_CTRL_6 0xfffe101C
-#define FUNC_MUX_CTRL_7 0xfffe1020
-#define FUNC_MUX_CTRL_8 0xfffe1024
-#define FUNC_MUX_CTRL_9 0xfffe1028
-#define FUNC_MUX_CTRL_A 0xfffe102C
-#define FUNC_MUX_CTRL_B 0xfffe1030
-#define FUNC_MUX_CTRL_C 0xfffe1034
-#define FUNC_MUX_CTRL_D 0xfffe1038
-#define PULL_DWN_CTRL_0 0xfffe1040
-#define PULL_DWN_CTRL_1 0xfffe1044
-#define PULL_DWN_CTRL_2 0xfffe1048
-#define PULL_DWN_CTRL_3 0xfffe104c
-#define PULL_DWN_CTRL_4 0xfffe10ac
-
-/* OMAP-1610 specific multiplexing registers */
-#define FUNC_MUX_CTRL_E 0xfffe1090
-#define FUNC_MUX_CTRL_F 0xfffe1094
-#define FUNC_MUX_CTRL_10 0xfffe1098
-#define FUNC_MUX_CTRL_11 0xfffe109c
-#define FUNC_MUX_CTRL_12 0xfffe10a0
-#define PU_PD_SEL_0 0xfffe10b4
-#define PU_PD_SEL_1 0xfffe10b8
-#define PU_PD_SEL_2 0xfffe10bc
-#define PU_PD_SEL_3 0xfffe10c0
-#define PU_PD_SEL_4 0xfffe10c4
-
-/* Timer32K for 1610 and 1710*/
-#define OMAP_TIMER32K_BASE 0xFFFBC400
-
-/*
- * ---------------------------------------------------------------------------
- * TIPB bus interface
- * ---------------------------------------------------------------------------
- */
-#define TIPB_PUBLIC_CNTL_BASE 0xfffed300
-#define MPU_PUBLIC_TIPB_CNTL (TIPB_PUBLIC_CNTL_BASE + 0x8)
-#define TIPB_PRIVATE_CNTL_BASE 0xfffeca00
-#define MPU_PRIVATE_TIPB_CNTL (TIPB_PRIVATE_CNTL_BASE + 0x8)
-
-/*
- * ----------------------------------------------------------------------------
- * MPUI interface
- * ----------------------------------------------------------------------------
- */
-#define MPUI_BASE (0xfffec900)
-#define MPUI_CTRL (MPUI_BASE + 0x0)
-#define MPUI_DEBUG_ADDR (MPUI_BASE + 0x4)
-#define MPUI_DEBUG_DATA (MPUI_BASE + 0x8)
-#define MPUI_DEBUG_FLAG (MPUI_BASE + 0xc)
-#define MPUI_STATUS_REG (MPUI_BASE + 0x10)
-#define MPUI_DSP_STATUS (MPUI_BASE + 0x14)
-#define MPUI_DSP_BOOT_CONFIG (MPUI_BASE + 0x18)
-#define MPUI_DSP_API_CONFIG (MPUI_BASE + 0x1c)
-
-/*
- * ----------------------------------------------------------------------------
- * LED Pulse Generator
- * ----------------------------------------------------------------------------
- */
-#define OMAP_LPG1_BASE 0xfffbd000
-#define OMAP_LPG2_BASE 0xfffbd800
-#define OMAP_LPG1_LCR (OMAP_LPG1_BASE + 0x00)
-#define OMAP_LPG1_PMR (OMAP_LPG1_BASE + 0x04)
-#define OMAP_LPG2_LCR (OMAP_LPG2_BASE + 0x00)
-#define OMAP_LPG2_PMR (OMAP_LPG2_BASE + 0x04)
-
-/*
- * ----------------------------------------------------------------------------
- * Pulse-Width Light
- * ----------------------------------------------------------------------------
- */
-#define OMAP_PWL_BASE 0xfffb5800
-#define OMAP_PWL_ENABLE (OMAP_PWL_BASE + 0x00)
-#define OMAP_PWL_CLK_ENABLE (OMAP_PWL_BASE + 0x04)
-
-/*
- * ---------------------------------------------------------------------------
- * Processor specific defines
- * ---------------------------------------------------------------------------
- */
-
-#include <plat/omap7xx.h>
-#include <plat/omap1510.h>
-#include <plat/omap16xx.h>
-#include <plat/omap24xx.h>
-#include <plat/omap34xx.h>
-#include <plat/omap44xx.h>
-#include <plat/ti81xx.h>
-#include <plat/am33xx.h>
-#include <plat/omap54xx.h>
-
-#endif /* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/plat-omap/include/plat/irqs-44xx.h b/arch/arm/plat-omap/include/plat/irqs-44xx.h
deleted file mode 100644
index 518322c8011..00000000000
--- a/arch/arm/plat-omap/include/plat/irqs-44xx.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * OMAP4 Interrupt lines definitions
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- *
- * Santosh Shilimkar (santosh.shilimkar@ti.com)
- * Benoit Cousson (b-cousson@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_OMAP44XX_IRQS_H
-#define __ARCH_ARM_MACH_OMAP2_OMAP44XX_IRQS_H
-
-/* OMAP44XX IRQs numbers definitions */
-#define OMAP44XX_IRQ_LOCALTIMER 29
-#define OMAP44XX_IRQ_LOCALWDT 30
-
-#define OMAP44XX_IRQ_GIC_START 32
-
-#define OMAP44XX_IRQ_PL310 (0 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_CTI0 (1 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_CTI1 (2 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_ELM (4 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SYS_1N (7 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SECURITY_EVENTS (8 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_L3_DBG (9 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_L3_APP (10 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_PRCM (11 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SDMA_0 (12 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SDMA_1 (13 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SDMA_2 (14 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SDMA_3 (15 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MCBSP4 (16 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MCBSP1 (17 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SR_MCU (18 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SR_CORE (19 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPMC (20 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GFX (21 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MCBSP2 (22 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MCBSP3 (23 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_ISS_5 (24 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DSS_DISPC (25 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MAIL_U0 (26 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_C2C_SSCM_0 (27 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_TESLA_MMU (28 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPIO1 (29 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPIO2 (30 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPIO3 (31 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPIO4 (32 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPIO5 (33 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPIO6 (34 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_USIM (35 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_WDT3 (36 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT1 (37 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT2 (38 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT3 (39 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT4 (40 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT5 (41 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT6 (42 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT7 (43 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT8 (44 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT9 (45 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT10 (46 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT11 (47 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SPI4 (48 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SHA1_S (49 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_FPKA_SINTREQUEST_S (50 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SHA1_P (51 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_RNG (52 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DSS_DSI1 (53 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_I2C1 (56 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_I2C2 (57 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_HDQ (58 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MMC5 (59 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_I2C3 (61 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_I2C4 (62 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_AES2_S (63 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_AES2_P (64 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SPI1 (65 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SPI2 (66 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_HSI_P1 (67 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_HSI_P2 (68 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_FDIF_3 (69 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_UART4 (70 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_HSI_DMA (71 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_UART1 (72 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_UART2 (73 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_UART3 (74 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_PBIAS (75 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_OHCI (76 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_EHCI (77 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_TLL (78 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_AES1_S (79 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_WDT2 (80 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DES_S (81 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DES_P (82 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MMC1 (83 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DSS_DSI2 (84 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_AES1_P (85 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MMC2 (86 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MPU_ICR (87 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_C2C_SSCM_1 (88 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_FSUSB (89 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_FSUSB_SMI (90 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SPI3 (91 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_HS_USB_MC_N (92 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_HS_USB_DMA_N (93 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MMC3 (94 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT12 (95 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MMC4 (96 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SLIMBUS1 (97 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SLIMBUS2 (98 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_ABE (99 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DUCATI_MMU (100 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DSS_HDMI (101 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SR_IVA (102 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_IVA_HD_POSYNCITRPEND_1 (103 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_IVA_HD_POSYNCITRPEND_0 (104 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_IVA_HD_POMBINTRPEND_0 (107 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MCASP1_AR (108 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MCASP1_AX (109 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_EMIF4_1 (110 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_EMIF4_2 (111 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MCPDM (112 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DMM (113 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DMIC (114 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_CDMA_0 (115 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_CDMA_1 (116 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_CDMA_2 (117 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_CDMA_3 (118 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SYS_2N (119 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_KBD_CTL (120 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_UNIPRO1 (124 + OMAP44XX_IRQ_GIC_START)
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
deleted file mode 100644
index 37bbbbb981b..00000000000
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ /dev/null
@@ -1,453 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/irqs.h
- *
- * Copyright (C) Greg Lonnon 2001
- * Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
- * are different.
- */
-
-#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
-#define __ASM_ARCH_OMAP15XX_IRQS_H
-
-/* All OMAP4 specific defines are moved to irqs-44xx.h */
-#include "irqs-44xx.h"
-
-/*
- * IRQ numbers for interrupt handler 1
- *
- * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
- *
- */
-#define INT_CAMERA 1
-#define INT_FIQ 3
-#define INT_RTDX 6
-#define INT_DSP_MMU_ABORT 7
-#define INT_HOST 8
-#define INT_ABORT 9
-#define INT_BRIDGE_PRIV 13
-#define INT_GPIO_BANK1 14
-#define INT_UART3 15
-#define INT_TIMER3 16
-#define INT_DMA_CH0_6 19
-#define INT_DMA_CH1_7 20
-#define INT_DMA_CH2_8 21
-#define INT_DMA_CH3 22
-#define INT_DMA_CH4 23
-#define INT_DMA_CH5 24
-#define INT_DMA_LCD 25
-#define INT_TIMER1 26
-#define INT_WD_TIMER 27
-#define INT_BRIDGE_PUB 28
-#define INT_TIMER2 30
-#define INT_LCD_CTRL 31
-
-/*
- * OMAP-1510 specific IRQ numbers for interrupt handler 1
- */
-#define INT_1510_IH2_IRQ 0
-#define INT_1510_RES2 2
-#define INT_1510_SPI_TX 4
-#define INT_1510_SPI_RX 5
-#define INT_1510_DSP_MAILBOX1 10
-#define INT_1510_DSP_MAILBOX2 11
-#define INT_1510_RES12 12
-#define INT_1510_LB_MMU 17
-#define INT_1510_RES18 18
-#define INT_1510_LOCAL_BUS 29
-
-/*
- * OMAP-1610 specific IRQ numbers for interrupt handler 1
- */
-#define INT_1610_IH2_IRQ INT_1510_IH2_IRQ
-#define INT_1610_IH2_FIQ 2
-#define INT_1610_McBSP2_TX 4
-#define INT_1610_McBSP2_RX 5
-#define INT_1610_DSP_MAILBOX1 10
-#define INT_1610_DSP_MAILBOX2 11
-#define INT_1610_LCD_LINE 12
-#define INT_1610_GPTIMER1 17
-#define INT_1610_GPTIMER2 18
-#define INT_1610_SSR_FIFO_0 29
-
-/*
- * OMAP-7xx specific IRQ numbers for interrupt handler 1
- */
-#define INT_7XX_IH2_FIQ 0
-#define INT_7XX_IH2_IRQ 1
-#define INT_7XX_USB_NON_ISO 2
-#define INT_7XX_USB_ISO 3
-#define INT_7XX_ICR 4
-#define INT_7XX_EAC 5
-#define INT_7XX_GPIO_BANK1 6
-#define INT_7XX_GPIO_BANK2 7
-#define INT_7XX_GPIO_BANK3 8
-#define INT_7XX_McBSP2TX 10
-#define INT_7XX_McBSP2RX 11
-#define INT_7XX_McBSP2RX_OVF 12
-#define INT_7XX_LCD_LINE 14
-#define INT_7XX_GSM_PROTECT 15
-#define INT_7XX_TIMER3 16
-#define INT_7XX_GPIO_BANK5 17
-#define INT_7XX_GPIO_BANK6 18
-#define INT_7XX_SPGIO_WR 29
-
-/*
- * IRQ numbers for interrupt handler 2
- *
- * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
- */
-#define IH2_BASE 32
-
-#define INT_KEYBOARD (1 + IH2_BASE)
-#define INT_uWireTX (2 + IH2_BASE)
-#define INT_uWireRX (3 + IH2_BASE)
-#define INT_I2C (4 + IH2_BASE)
-#define INT_MPUIO (5 + IH2_BASE)
-#define INT_USB_HHC_1 (6 + IH2_BASE)
-#define INT_McBSP3TX (10 + IH2_BASE)
-#define INT_McBSP3RX (11 + IH2_BASE)
-#define INT_McBSP1TX (12 + IH2_BASE)
-#define INT_McBSP1RX (13 + IH2_BASE)
-#define INT_UART1 (14 + IH2_BASE)
-#define INT_UART2 (15 + IH2_BASE)
-#define INT_BT_MCSI1TX (16 + IH2_BASE)
-#define INT_BT_MCSI1RX (17 + IH2_BASE)
-#define INT_SOSSI_MATCH (19 + IH2_BASE)
-#define INT_USB_W2FC (20 + IH2_BASE)
-#define INT_1WIRE (21 + IH2_BASE)
-#define INT_OS_TIMER (22 + IH2_BASE)
-#define INT_MMC (23 + IH2_BASE)
-#define INT_GAUGE_32K (24 + IH2_BASE)
-#define INT_RTC_TIMER (25 + IH2_BASE)
-#define INT_RTC_ALARM (26 + IH2_BASE)
-#define INT_MEM_STICK (27 + IH2_BASE)
-
-/*
- * OMAP-1510 specific IRQ numbers for interrupt handler 2
- */
-#define INT_1510_DSP_MMU (28 + IH2_BASE)
-#define INT_1510_COM_SPI_RO (31 + IH2_BASE)
-
-/*
- * OMAP-1610 specific IRQ numbers for interrupt handler 2
- */
-#define INT_1610_FAC (0 + IH2_BASE)
-#define INT_1610_USB_HHC_2 (7 + IH2_BASE)
-#define INT_1610_USB_OTG (8 + IH2_BASE)
-#define INT_1610_SoSSI (9 + IH2_BASE)
-#define INT_1610_SoSSI_MATCH (19 + IH2_BASE)
-#define INT_1610_DSP_MMU (28 + IH2_BASE)
-#define INT_1610_McBSP2RX_OF (31 + IH2_BASE)
-#define INT_1610_STI (32 + IH2_BASE)
-#define INT_1610_STI_WAKEUP (33 + IH2_BASE)
-#define INT_1610_GPTIMER3 (34 + IH2_BASE)
-#define INT_1610_GPTIMER4 (35 + IH2_BASE)
-#define INT_1610_GPTIMER5 (36 + IH2_BASE)
-#define INT_1610_GPTIMER6 (37 + IH2_BASE)
-#define INT_1610_GPTIMER7 (38 + IH2_BASE)
-#define INT_1610_GPTIMER8 (39 + IH2_BASE)
-#define INT_1610_GPIO_BANK2 (40 + IH2_BASE)
-#define INT_1610_GPIO_BANK3 (41 + IH2_BASE)
-#define INT_1610_MMC2 (42 + IH2_BASE)
-#define INT_1610_CF (43 + IH2_BASE)
-#define INT_1610_WAKE_UP_REQ (46 + IH2_BASE)
-#define INT_1610_GPIO_BANK4 (48 + IH2_BASE)
-#define INT_1610_SPI (49 + IH2_BASE)
-#define INT_1610_DMA_CH6 (53 + IH2_BASE)
-#define INT_1610_DMA_CH7 (54 + IH2_BASE)
-#define INT_1610_DMA_CH8 (55 + IH2_BASE)
-#define INT_1610_DMA_CH9 (56 + IH2_BASE)
-#define INT_1610_DMA_CH10 (57 + IH2_BASE)
-#define INT_1610_DMA_CH11 (58 + IH2_BASE)
-#define INT_1610_DMA_CH12 (59 + IH2_BASE)
-#define INT_1610_DMA_CH13 (60 + IH2_BASE)
-#define INT_1610_DMA_CH14 (61 + IH2_BASE)
-#define INT_1610_DMA_CH15 (62 + IH2_BASE)
-#define INT_1610_NAND (63 + IH2_BASE)
-#define INT_1610_SHA1MD5 (91 + IH2_BASE)
-
-/*
- * OMAP-7xx specific IRQ numbers for interrupt handler 2
- */
-#define INT_7XX_HW_ERRORS (0 + IH2_BASE)
-#define INT_7XX_NFIQ_PWR_FAIL (1 + IH2_BASE)
-#define INT_7XX_CFCD (2 + IH2_BASE)
-#define INT_7XX_CFIREQ (3 + IH2_BASE)
-#define INT_7XX_I2C (4 + IH2_BASE)
-#define INT_7XX_PCC (5 + IH2_BASE)
-#define INT_7XX_MPU_EXT_NIRQ (6 + IH2_BASE)
-#define INT_7XX_SPI_100K_1 (7 + IH2_BASE)
-#define INT_7XX_SYREN_SPI (8 + IH2_BASE)
-#define INT_7XX_VLYNQ (9 + IH2_BASE)
-#define INT_7XX_GPIO_BANK4 (10 + IH2_BASE)
-#define INT_7XX_McBSP1TX (11 + IH2_BASE)
-#define INT_7XX_McBSP1RX (12 + IH2_BASE)
-#define INT_7XX_McBSP1RX_OF (13 + IH2_BASE)
-#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE)
-#define INT_7XX_UART_MODEM_1 (15 + IH2_BASE)
-#define INT_7XX_MCSI (16 + IH2_BASE)
-#define INT_7XX_uWireTX (17 + IH2_BASE)
-#define INT_7XX_uWireRX (18 + IH2_BASE)
-#define INT_7XX_SMC_CD (19 + IH2_BASE)
-#define INT_7XX_SMC_IREQ (20 + IH2_BASE)
-#define INT_7XX_HDQ_1WIRE (21 + IH2_BASE)
-#define INT_7XX_TIMER32K (22 + IH2_BASE)
-#define INT_7XX_MMC_SDIO (23 + IH2_BASE)
-#define INT_7XX_UPLD (24 + IH2_BASE)
-#define INT_7XX_USB_HHC_1 (27 + IH2_BASE)
-#define INT_7XX_USB_HHC_2 (28 + IH2_BASE)
-#define INT_7XX_USB_GENI (29 + IH2_BASE)
-#define INT_7XX_USB_OTG (30 + IH2_BASE)
-#define INT_7XX_CAMERA_IF (31 + IH2_BASE)
-#define INT_7XX_RNG (32 + IH2_BASE)
-#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE)
-#define INT_7XX_DBB_RF_EN (34 + IH2_BASE)
-#define INT_7XX_MPUIO_KEYPAD (35 + IH2_BASE)
-#define INT_7XX_SHA1_MD5 (36 + IH2_BASE)
-#define INT_7XX_SPI_100K_2 (37 + IH2_BASE)
-#define INT_7XX_RNG_IDLE (38 + IH2_BASE)
-#define INT_7XX_MPUIO (39 + IH2_BASE)
-#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE)
-#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE)
-#define INT_7XX_LLPC_OE_RISING (42 + IH2_BASE)
-#define INT_7XX_LLPC_VSYNC (43 + IH2_BASE)
-#define INT_7XX_WAKE_UP_REQ (46 + IH2_BASE)
-#define INT_7XX_DMA_CH6 (53 + IH2_BASE)
-#define INT_7XX_DMA_CH7 (54 + IH2_BASE)
-#define INT_7XX_DMA_CH8 (55 + IH2_BASE)
-#define INT_7XX_DMA_CH9 (56 + IH2_BASE)
-#define INT_7XX_DMA_CH10 (57 + IH2_BASE)
-#define INT_7XX_DMA_CH11 (58 + IH2_BASE)
-#define INT_7XX_DMA_CH12 (59 + IH2_BASE)
-#define INT_7XX_DMA_CH13 (60 + IH2_BASE)
-#define INT_7XX_DMA_CH14 (61 + IH2_BASE)
-#define INT_7XX_DMA_CH15 (62 + IH2_BASE)
-#define INT_7XX_NAND (63 + IH2_BASE)
-
-#define INT_24XX_SYS_NIRQ 7
-#define INT_24XX_SDMA_IRQ0 12
-#define INT_24XX_SDMA_IRQ1 13
-#define INT_24XX_SDMA_IRQ2 14
-#define INT_24XX_SDMA_IRQ3 15
-#define INT_24XX_CAM_IRQ 24
-#define INT_24XX_DSS_IRQ 25
-#define INT_24XX_MAIL_U0_MPU 26
-#define INT_24XX_DSP_UMA 27
-#define INT_24XX_DSP_MMU 28
-#define INT_24XX_GPIO_BANK1 29
-#define INT_24XX_GPIO_BANK2 30
-#define INT_24XX_GPIO_BANK3 31
-#define INT_24XX_GPIO_BANK4 32
-#define INT_24XX_GPIO_BANK5 33
-#define INT_24XX_MAIL_U3_MPU 34
-#define INT_24XX_GPTIMER1 37
-#define INT_24XX_GPTIMER2 38
-#define INT_24XX_GPTIMER3 39
-#define INT_24XX_GPTIMER4 40
-#define INT_24XX_GPTIMER5 41
-#define INT_24XX_GPTIMER6 42
-#define INT_24XX_GPTIMER7 43
-#define INT_24XX_GPTIMER8 44
-#define INT_24XX_GPTIMER9 45
-#define INT_24XX_GPTIMER10 46
-#define INT_24XX_GPTIMER11 47
-#define INT_24XX_GPTIMER12 48
-#define INT_24XX_SHA1MD5 51
-#define INT_24XX_MCBSP4_IRQ_TX 54
-#define INT_24XX_MCBSP4_IRQ_RX 55
-#define INT_24XX_I2C1_IRQ 56
-#define INT_24XX_I2C2_IRQ 57
-#define INT_24XX_HDQ_IRQ 58
-#define INT_24XX_MCBSP1_IRQ_TX 59
-#define INT_24XX_MCBSP1_IRQ_RX 60
-#define INT_24XX_MCBSP2_IRQ_TX 62
-#define INT_24XX_MCBSP2_IRQ_RX 63
-#define INT_24XX_SPI1_IRQ 65
-#define INT_24XX_SPI2_IRQ 66
-#define INT_24XX_UART1_IRQ 72
-#define INT_24XX_UART2_IRQ 73
-#define INT_24XX_UART3_IRQ 74
-#define INT_24XX_USB_IRQ_GEN 75
-#define INT_24XX_USB_IRQ_NISO 76
-#define INT_24XX_USB_IRQ_ISO 77
-#define INT_24XX_USB_IRQ_HGEN 78
-#define INT_24XX_USB_IRQ_HSOF 79
-#define INT_24XX_USB_IRQ_OTG 80
-#define INT_24XX_MCBSP5_IRQ_TX 81
-#define INT_24XX_MCBSP5_IRQ_RX 82
-#define INT_24XX_MMC_IRQ 83
-#define INT_24XX_MMC2_IRQ 86
-#define INT_24XX_MCBSP3_IRQ_TX 89
-#define INT_24XX_MCBSP3_IRQ_RX 90
-#define INT_24XX_SPI3_IRQ 91
-
-#define INT_243X_MCBSP2_IRQ 16
-#define INT_243X_MCBSP3_IRQ 17
-#define INT_243X_MCBSP4_IRQ 18
-#define INT_243X_MCBSP5_IRQ 19
-#define INT_243X_MCBSP1_IRQ 64
-#define INT_243X_HS_USB_MC 92
-#define INT_243X_HS_USB_DMA 93
-#define INT_243X_CARKIT_IRQ 94
-
-#define INT_34XX_BENCH_MPU_EMUL 3
-#define INT_34XX_ST_MCBSP2_IRQ 4
-#define INT_34XX_ST_MCBSP3_IRQ 5
-#define INT_34XX_SSM_ABORT_IRQ 6
-#define INT_34XX_SYS_NIRQ 7
-#define INT_34XX_D2D_FW_IRQ 8
-#define INT_34XX_L3_DBG_IRQ 9
-#define INT_34XX_L3_APP_IRQ 10
-#define INT_34XX_PRCM_MPU_IRQ 11
-#define INT_34XX_MCBSP1_IRQ 16
-#define INT_34XX_MCBSP2_IRQ 17
-#define INT_34XX_GPMC_IRQ 20
-#define INT_34XX_MCBSP3_IRQ 22
-#define INT_34XX_MCBSP4_IRQ 23
-#define INT_34XX_CAM_IRQ 24
-#define INT_34XX_MCBSP5_IRQ 27
-#define INT_34XX_GPIO_BANK1 29
-#define INT_34XX_GPIO_BANK2 30
-#define INT_34XX_GPIO_BANK3 31
-#define INT_34XX_GPIO_BANK4 32
-#define INT_34XX_GPIO_BANK5 33
-#define INT_34XX_GPIO_BANK6 34
-#define INT_34XX_USIM_IRQ 35
-#define INT_34XX_WDT3_IRQ 36
-#define INT_34XX_SPI4_IRQ 48
-#define INT_34XX_SHA1MD52_IRQ 49
-#define INT_34XX_FPKA_READY_IRQ 50
-#define INT_34XX_SHA1MD51_IRQ 51
-#define INT_34XX_RNG_IRQ 52
-#define INT_34XX_I2C3_IRQ 61
-#define INT_34XX_FPKA_ERROR_IRQ 64
-#define INT_34XX_PBIAS_IRQ 75
-#define INT_34XX_OHCI_IRQ 76
-#define INT_34XX_EHCI_IRQ 77
-#define INT_34XX_TLL_IRQ 78
-#define INT_34XX_PARTHASH_IRQ 79
-#define INT_34XX_MMC3_IRQ 94
-#define INT_34XX_GPT12_IRQ 95
-
-#define INT_36XX_UART4_IRQ 80
-
-#define INT_35XX_HECC0_IRQ 24
-#define INT_35XX_HECC1_IRQ 28
-#define INT_35XX_EMAC_C0_RXTHRESH_IRQ 67
-#define INT_35XX_EMAC_C0_RX_PULSE_IRQ 68
-#define INT_35XX_EMAC_C0_TX_PULSE_IRQ 69
-#define INT_35XX_EMAC_C0_MISC_PULSE_IRQ 70
-#define INT_35XX_USBOTG_IRQ 71
-#define INT_35XX_UART4_IRQ 84
-#define INT_35XX_CCDC_VD0_IRQ 88
-#define INT_35XX_CCDC_VD1_IRQ 92
-#define INT_35XX_CCDC_VD2_IRQ 93
-
-/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
- * 16 MPUIO lines */
-#define OMAP_MAX_GPIO_LINES 192
-#define IH_GPIO_BASE (128 + IH2_BASE)
-#define IH_MPUIO_BASE (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
-#define OMAP_IRQ_END (IH_MPUIO_BASE + 16)
-
-/* External FPGA handles interrupts on Innovator boards */
-#define OMAP_FPGA_IRQ_BASE (OMAP_IRQ_END)
-#ifdef CONFIG_MACH_OMAP_INNOVATOR
-#define OMAP_FPGA_NR_IRQS 24
-#else
-#define OMAP_FPGA_NR_IRQS 0
-#endif
-#define OMAP_FPGA_IRQ_END (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
-
-/* External TWL4030 can handle interrupts on 2430 and 34xx boards */
-#define TWL4030_IRQ_BASE (OMAP_FPGA_IRQ_END)
-#ifdef CONFIG_TWL4030_CORE
-#define TWL4030_BASE_NR_IRQS 8
-#define TWL4030_PWR_NR_IRQS 8
-#else
-#define TWL4030_BASE_NR_IRQS 0
-#define TWL4030_PWR_NR_IRQS 0
-#endif
-#define TWL4030_IRQ_END (TWL4030_IRQ_BASE + TWL4030_BASE_NR_IRQS)
-#define TWL4030_PWR_IRQ_BASE TWL4030_IRQ_END
-#define TWL4030_PWR_IRQ_END (TWL4030_PWR_IRQ_BASE + TWL4030_PWR_NR_IRQS)
-
-/* External TWL4030 gpio interrupts are optional */
-#define TWL4030_GPIO_IRQ_BASE TWL4030_PWR_IRQ_END
-#ifdef CONFIG_GPIO_TWL4030
-#define TWL4030_GPIO_NR_IRQS 18
-#else
-#define TWL4030_GPIO_NR_IRQS 0
-#endif
-#define TWL4030_GPIO_IRQ_END (TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS)
-
-#define TWL6030_IRQ_BASE (OMAP_FPGA_IRQ_END)
-#ifdef CONFIG_TWL4030_CORE
-#define TWL6030_BASE_NR_IRQS 20
-#else
-#define TWL6030_BASE_NR_IRQS 0
-#endif
-#define TWL6030_IRQ_END (TWL6030_IRQ_BASE + TWL6030_BASE_NR_IRQS)
-
-#define TWL6040_CODEC_IRQ_BASE TWL6030_IRQ_END
-#ifdef CONFIG_TWL6040_CODEC
-#define TWL6040_CODEC_NR_IRQS 6
-#else
-#define TWL6040_CODEC_NR_IRQS 0
-#endif
-#define TWL6040_CODEC_IRQ_END (TWL6040_CODEC_IRQ_BASE + TWL6040_CODEC_NR_IRQS)
-
-/* Total number of interrupts depends on the enabled blocks above */
-#if (TWL4030_GPIO_IRQ_END > TWL6040_CODEC_IRQ_END)
-#define TWL_IRQ_END TWL4030_GPIO_IRQ_END
-#else
-#define TWL_IRQ_END TWL6040_CODEC_IRQ_END
-#endif
-
-/* GPMC related */
-#define OMAP_GPMC_IRQ_BASE (TWL_IRQ_END)
-#define OMAP_GPMC_NR_IRQS 8
-#define OMAP_GPMC_IRQ_END (OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS)
-
-/* PRCM IRQ handler */
-#ifdef CONFIG_ARCH_OMAP2PLUS
-#define OMAP_PRCM_IRQ_BASE (OMAP_GPMC_IRQ_END)
-#define OMAP_PRCM_NR_IRQS 64
-#define OMAP_PRCM_IRQ_END (OMAP_PRCM_IRQ_BASE + OMAP_PRCM_NR_IRQS)
-#else
-#define OMAP_PRCM_IRQ_END OMAP_GPMC_IRQ_END
-#endif
-
-#define NR_IRQS OMAP_PRCM_IRQ_END
-
-#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32))
-
-#define INTCPS_NR_MIR_REGS 3
-#define INTCPS_NR_IRQS 96
-
-#include <mach/hardware.h>
-
-#ifdef CONFIG_FIQ
-#define FIQ_START 1024
-#endif
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index eb3e4d55534..8b4e4f2da2f 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -15,7 +15,6 @@
#include <linux/device.h>
#include <linux/mmc/host.h>
-#include <plat/board.h>
#include <plat/omap_hwmod.h>
#define OMAP15XX_NR_MMC 1
diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h
index 67fc5060183..1a68c1e5fe5 100644
--- a/arch/arm/plat-omap/include/plat/nand.h
+++ b/arch/arm/plat-omap/include/plat/nand.h
@@ -24,11 +24,10 @@ struct omap_nand_platform_data {
struct gpmc_timings *gpmc_t;
int nr_parts;
bool dev_ready;
- int gpmc_irq;
enum nand_io xfer_type;
- unsigned long phys_base;
int devsize;
enum omap_ecc ecc_opt;
+ struct gpmc_nand_regs reg;
};
/* minimum size for IO mapping */
diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
index 1a52725ffcf..a531149823b 100644
--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -18,7 +18,7 @@
#define __OMAP_SERIAL_H__
#include <linux/serial_core.h>
-#include <linux/platform_device.h>
+#include <linux/device.h>
#include <linux/pm_qos.h>
#include <plat/mux.h>
@@ -42,10 +42,10 @@
#define OMAP_UART_WER_MOD_WKUP 0X7F
/* Enable XON/XOFF flow control on output */
-#define OMAP_UART_SW_TX 0x04
+#define OMAP_UART_SW_TX 0x8
/* Enable XON/XOFF flow control on input */
-#define OMAP_UART_SW_RX 0x04
+#define OMAP_UART_SW_RX 0x2
#define OMAP_UART_SYSC_RESET 0X07
#define OMAP_UART_TCR_TRIG 0X0F
@@ -69,11 +69,14 @@ struct omap_uart_port_info {
unsigned int dma_rx_timeout;
unsigned int autosuspend_timeout;
unsigned int dma_rx_poll_rate;
+ int DTR_gpio;
+ int DTR_inverted;
+ int DTR_present;
int (*get_context_loss_count)(struct device *);
- void (*set_forceidle)(struct platform_device *);
- void (*set_noidle)(struct platform_device *);
- void (*enable_wakeup)(struct platform_device *, bool);
+ void (*set_forceidle)(struct device *);
+ void (*set_noidle)(struct device *);
+ void (*enable_wakeup)(struct device *, bool);
};
struct uart_omap_dma {
@@ -102,39 +105,4 @@ struct uart_omap_dma {
unsigned int rx_timeout;
};
-struct uart_omap_port {
- struct uart_port port;
- struct uart_omap_dma uart_dma;
- struct platform_device *pdev;
-
- unsigned char ier;
- unsigned char lcr;
- unsigned char mcr;
- unsigned char fcr;
- unsigned char efr;
- unsigned char dll;
- unsigned char dlh;
- unsigned char mdr1;
- unsigned char scr;
-
- int use_dma;
- /*
- * Some bits in registers are cleared on a read, so they must
- * be saved whenever the register is read but the bits will not
- * be immediately processed.
- */
- unsigned int lsr_break_flag;
- unsigned char msr_saved_flags;
- char name[20];
- unsigned long port_activity;
- u32 context_loss_cnt;
- u32 errata;
- u8 wakeups_enabled;
-
- struct pm_qos_request pm_qos_request;
- u32 latency;
- u32 calc_latency;
- struct work_struct qos_work;
-};
-
#endif /* __OMAP_SERIAL_H__ */
diff --git a/arch/arm/plat-omap/include/plat/omap4-keypad.h b/arch/arm/plat-omap/include/plat/omap4-keypad.h
index 8ad0a377a54..20de0d5a7e7 100644
--- a/arch/arm/plat-omap/include/plat/omap4-keypad.h
+++ b/arch/arm/plat-omap/include/plat/omap4-keypad.h
@@ -1,6 +1,8 @@
#ifndef ARCH_ARM_PLAT_OMAP4_KEYPAD_H
#define ARCH_ARM_PLAT_OMAP4_KEYPAD_H
+struct omap_board_data;
+
extern int omap4_keyboard_init(struct omap4_keypad_platform_data *,
struct omap_board_data *);
#endif
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 6132972aff3..5857b9cd6eb 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -615,6 +615,7 @@ int omap_hwmod_softreset(struct omap_hwmod *oh);
int omap_hwmod_count_resources(struct omap_hwmod *oh);
int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
+int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res);
int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type,
const char *name, struct resource *res);
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index 548a4c8d63d..bd20588c356 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -5,7 +5,6 @@
#include <linux/io.h>
#include <linux/usb/musb.h>
-#include <plat/board.h>
#define OMAP3_HS_USB_PORTS 3
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index c490240bb82..6f5c5809681 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -370,6 +370,14 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
goto odbfd_exit1;
}
+ /* Fix up missing resource names */
+ for (i = 0; i < pdev->num_resources; i++) {
+ struct resource *r = &pdev->resource[i];
+
+ if (r->name == NULL)
+ r->name = dev_name(&pdev->dev);
+ }
+
if (of_get_property(node, "ti,no_idle_on_suspend", NULL))
omap_device_disable_idle_on_suspend(pdev);
@@ -486,6 +494,33 @@ static int omap_device_fill_resources(struct omap_device *od,
}
/**
+ * _od_fill_dma_resources - fill in array of struct resource with dma resources
+ * @od: struct omap_device *
+ * @res: pointer to an array of struct resource to be filled in
+ *
+ * Populate one or more empty struct resource pointed to by @res with
+ * the dma resource data for this omap_device @od. Used by
+ * omap_device_alloc() after calling omap_device_count_resources().
+ *
+ * Ideally this function would not be needed at all. If we have
+ * mechanism to get dma resources from DT.
+ *
+ * Returns 0.
+ */
+static int _od_fill_dma_resources(struct omap_device *od,
+ struct resource *res)
+{
+ int i, r;
+
+ for (i = 0; i < od->hwmods_cnt; i++) {
+ r = omap_hwmod_fill_dma_resources(od->hwmods[i], res);
+ res += r;
+ }
+
+ return 0;
+}
+
+/**
* omap_device_alloc - allocate an omap_device
* @pdev: platform_device that will be included in this omap_device
* @oh: ptr to the single omap_hwmod that backs this omap_device
@@ -524,24 +559,44 @@ struct omap_device *omap_device_alloc(struct platform_device *pdev,
od->hwmods = hwmods;
od->pdev = pdev;
+ res_count = omap_device_count_resources(od);
/*
- * HACK: Ideally the resources from DT should match, and hwmod
- * should just add the missing ones. Since the name is not
- * properly populated by DT, stick to hwmod resources only.
+ * DT Boot:
+ * OF framework will construct the resource structure (currently
+ * does for MEM & IRQ resource) and we should respect/use these
+ * resources, killing hwmod dependency.
+ * If pdev->num_resources > 0, we assume that MEM & IRQ resources
+ * have been allocated by OF layer already (through DTB).
+ *
+ * Non-DT Boot:
+ * Here, pdev->num_resources = 0, and we should get all the
+ * resources from hwmod.
+ *
+ * TODO: Once DMA resource is available from OF layer, we should
+ * kill filling any resources from hwmod.
*/
- if (pdev->num_resources && pdev->resource)
- dev_warn(&pdev->dev, "%s(): resources already allocated %d\n",
- __func__, pdev->num_resources);
-
- res_count = omap_device_count_resources(od);
- if (res_count > 0) {
- dev_dbg(&pdev->dev, "%s(): resources allocated from hwmod %d\n",
- __func__, res_count);
+ if (res_count > pdev->num_resources) {
+ /* Allocate resources memory to account for new resources */
res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL);
if (!res)
goto oda_exit3;
- omap_device_fill_resources(od, res);
+ /*
+ * If pdev->num_resources > 0, then assume that,
+ * MEM and IRQ resources will only come from DT and only
+ * fill DMA resource from hwmod layer.
+ */
+ if (pdev->num_resources && pdev->resource) {
+ dev_dbg(&pdev->dev, "%s(): resources already allocated %d\n",
+ __func__, res_count);
+ memcpy(res, pdev->resource,
+ sizeof(struct resource) * pdev->num_resources);
+ _od_fill_dma_resources(od, &res[pdev->num_resources]);
+ } else {
+ dev_dbg(&pdev->dev, "%s(): using resources from hwmod %d\n",
+ __func__, res_count);
+ omap_device_fill_resources(od, res);
+ }
ret = platform_device_add_resources(pdev, res, res_count);
kfree(res);
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 766181cb5c9..d861aa73299 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -26,7 +26,6 @@
#include <asm/mach/map.h>
#include <plat/sram.h>
-#include <plat/board.h>
#include <plat/cpu.h>
#include "sram.h"
diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
index c34785dca92..ec536e4e36c 100644
--- a/arch/ia64/hp/sim/simserial.c
+++ b/arch/ia64/hp/sim/simserial.c
@@ -338,7 +338,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
/* Handle turning off CRTSCTS */
if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios->c_cflag & CRTSCTS)) {
+ !(tty->termios.c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
}
}
@@ -545,6 +545,7 @@ static int __init simrs_init(void)
/* the port is imaginary */
printk(KERN_INFO "ttyS0 at 0x03f8 (irq = %d) is a 16550\n", state->irq);
+ tty_port_link_device(&state->port, hp_simserial_driver, 0);
retval = tty_register_driver(hp_simserial_driver);
if (retval) {
printk(KERN_ERR "Couldn't register simserial driver\n");
diff --git a/arch/m68k/emu/nfcon.c b/arch/m68k/emu/nfcon.c
index 8db25e80694..16d170f53bf 100644
--- a/arch/m68k/emu/nfcon.c
+++ b/arch/m68k/emu/nfcon.c
@@ -19,6 +19,7 @@
#include <asm/natfeat.h>
static int stderr_id;
+static struct tty_port nfcon_tty_port;
static struct tty_driver *nfcon_tty_driver;
static void nfputs(const char *str, unsigned int count)
@@ -119,6 +120,8 @@ static int __init nfcon_init(void)
{
int res;
+ tty_port_init(&nfcon_tty_port);
+
stderr_id = nf_get_id("NF_STDERR");
if (!stderr_id)
return -ENODEV;
@@ -135,6 +138,7 @@ static int __init nfcon_init(void)
nfcon_tty_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(nfcon_tty_driver, &nfcon_tty_ops);
+ tty_port_link_device(&nfcon_tty_port, nfcon_tty_driver, 0);
res = tty_register_driver(nfcon_tty_driver);
if (res) {
pr_err("failed to register nfcon tty driver\n");
diff --git a/arch/mips/cavium-octeon/serial.c b/arch/mips/cavium-octeon/serial.c
index 138b2216b4f..569f41bdcc4 100644
--- a/arch/mips/cavium-octeon/serial.c
+++ b/arch/mips/cavium-octeon/serial.c
@@ -47,40 +47,40 @@ static int __devinit octeon_serial_probe(struct platform_device *pdev)
{
int irq, res;
struct resource *res_mem;
- struct uart_port port;
+ struct uart_8250_port up;
/* All adaptors have an irq. */
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
- memset(&port, 0, sizeof(port));
+ memset(&up, 0, sizeof(up));
- port.flags = ASYNC_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
- port.type = PORT_OCTEON;
- port.iotype = UPIO_MEM;
- port.regshift = 3;
- port.dev = &pdev->dev;
+ up.port.flags = ASYNC_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
+ up.port.type = PORT_OCTEON;
+ up.port.iotype = UPIO_MEM;
+ up.port.regshift = 3;
+ up.port.dev = &pdev->dev;
if (octeon_is_simulation())
/* Make simulator output fast*/
- port.uartclk = 115200 * 16;
+ up.port.uartclk = 115200 * 16;
else
- port.uartclk = octeon_get_io_clock_rate();
+ up.port.uartclk = octeon_get_io_clock_rate();
- port.serial_in = octeon_serial_in;
- port.serial_out = octeon_serial_out;
- port.irq = irq;
+ up.port.serial_in = octeon_serial_in;
+ up.port.serial_out = octeon_serial_out;
+ up.port.irq = irq;
res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res_mem == NULL) {
dev_err(&pdev->dev, "found no memory resource\n");
return -ENXIO;
}
- port.mapbase = res_mem->start;
- port.membase = ioremap(res_mem->start, resource_size(res_mem));
+ up.port.mapbase = res_mem->start;
+ up.port.membase = ioremap(res_mem->start, resource_size(res_mem));
- res = serial8250_register_port(&port);
+ res = serial8250_register_8250_port(&up);
return res >= 0 ? 0 : res;
}
diff --git a/arch/mips/sni/a20r.c b/arch/mips/sni/a20r.c
index c48194c3073..b2d4f492d78 100644
--- a/arch/mips/sni/a20r.c
+++ b/arch/mips/sni/a20r.c
@@ -133,6 +133,38 @@ static struct platform_device sc26xx_pdev = {
}
};
+#warning "Please try migrate to use new driver SCCNXP and report the status" \
+ "in the linux-serial mailing list."
+
+/* The code bellow is a replacement of SC26XX to SCCNXP */
+#if 0
+#include <linux/platform_data/sccnxp.h>
+
+static struct sccnxp_pdata sccnxp_data = {
+ .reg_shift = 2,
+ .frequency = 3686400,
+ .mctrl_cfg[0] = MCTRL_SIG(DTR_OP, LINE_OP7) |
+ MCTRL_SIG(RTS_OP, LINE_OP3) |
+ MCTRL_SIG(DSR_IP, LINE_IP5) |
+ MCTRL_SIG(DCD_IP, LINE_IP6),
+ .mctrl_cfg[1] = MCTRL_SIG(DTR_OP, LINE_OP2) |
+ MCTRL_SIG(RTS_OP, LINE_OP1) |
+ MCTRL_SIG(DSR_IP, LINE_IP0) |
+ MCTRL_SIG(CTS_IP, LINE_IP1) |
+ MCTRL_SIG(DCD_IP, LINE_IP2) |
+ MCTRL_SIG(RNG_IP, LINE_IP3),
+};
+
+static struct platform_device sc2681_pdev = {
+ .name = "sc2681",
+ .resource = sc2xxx_rsrc,
+ .num_resources = ARRAY_SIZE(sc2xxx_rsrc),
+ .dev = {
+ .platform_data = &sccnxp_data,
+ },
+};
+#endif
+
static u32 a20r_ack_hwint(void)
{
u32 status = read_c0_status();
diff --git a/arch/parisc/kernel/pdc_cons.c b/arch/parisc/kernel/pdc_cons.c
index 47341aa208f..88238638aee 100644
--- a/arch/parisc/kernel/pdc_cons.c
+++ b/arch/parisc/kernel/pdc_cons.c
@@ -202,6 +202,7 @@ static int __init pdc_console_tty_driver_init(void)
pdc_console_tty_driver->flags = TTY_DRIVER_REAL_RAW |
TTY_DRIVER_RESET_TERMIOS;
tty_set_operations(pdc_console_tty_driver, &pdc_console_tty_ops);
+ tty_port_link_device(&tty_port, pdc_console_tty_driver, 0);
err = tty_register_driver(pdc_console_tty_driver);
if (err) {
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 53b6dfa8334..54b73a28c20 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -386,6 +386,7 @@ extern unsigned long cpuidle_disable;
enum idle_boot_override {IDLE_NO_OVERRIDE = 0, IDLE_POWERSAVE_OFF};
extern int powersave_nap; /* set if nap mode can be used in idle loop */
+extern void power7_nap(void);
#ifdef CONFIG_PSERIES_IDLE
extern void update_smt_snooze_delay(int snooze);
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 85b05c463fa..e8995727b1c 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -76,6 +76,7 @@ int main(void)
DEFINE(SIGSEGV, SIGSEGV);
DEFINE(NMI_MASK, NMI_MASK);
DEFINE(THREAD_DSCR, offsetof(struct thread_struct, dscr));
+ DEFINE(THREAD_DSCR_INHERIT, offsetof(struct thread_struct, dscr_inherit));
#else
DEFINE(THREAD_INFO, offsetof(struct task_struct, stack));
#endif /* CONFIG_PPC64 */
diff --git a/arch/powerpc/kernel/dbell.c b/arch/powerpc/kernel/dbell.c
index 5b25c8060fd..a892680668d 100644
--- a/arch/powerpc/kernel/dbell.c
+++ b/arch/powerpc/kernel/dbell.c
@@ -28,6 +28,8 @@ void doorbell_setup_this_cpu(void)
void doorbell_cause_ipi(int cpu, unsigned long data)
{
+ /* Order previous accesses vs. msgsnd, which is treated as a store */
+ mb();
ppc_msgsnd(PPC_DBELL, 0, data);
}
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 4b01a25e29e..b40e0b4815b 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -370,6 +370,12 @@ _GLOBAL(ret_from_fork)
li r3,0
b syscall_exit
+ .section ".toc","aw"
+DSCR_DEFAULT:
+ .tc dscr_default[TC],dscr_default
+
+ .section ".text"
+
/*
* This routine switches between two different tasks. The process
* state of one is saved on its kernel stack. Then the state
@@ -509,9 +515,6 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
mr r1,r8 /* start using new stack pointer */
std r7,PACAKSAVE(r13)
- ld r6,_CCR(r1)
- mtcrf 0xFF,r6
-
#ifdef CONFIG_ALTIVEC
BEGIN_FTR_SECTION
ld r0,THREAD_VRSAVE(r4)
@@ -520,14 +523,22 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
#endif /* CONFIG_ALTIVEC */
#ifdef CONFIG_PPC64
BEGIN_FTR_SECTION
+ lwz r6,THREAD_DSCR_INHERIT(r4)
+ ld r7,DSCR_DEFAULT@toc(2)
ld r0,THREAD_DSCR(r4)
- cmpd r0,r25
- beq 1f
+ cmpwi r6,0
+ bne 1f
+ ld r0,0(r7)
+1: cmpd r0,r25
+ beq 2f
mtspr SPRN_DSCR,r0
-1:
+2:
END_FTR_SECTION_IFSET(CPU_FTR_DSCR)
#endif
+ ld r6,_CCR(r1)
+ mtcrf 0xFF,r6
+
/* r3-r13 are destroyed -- Cort */
REST_8GPRS(14, r1)
REST_10GPRS(22, r1)
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index e894515e77b..39aa97d3ff8 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -186,7 +186,7 @@ hardware_interrupt_hv:
KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0x800)
MASKABLE_EXCEPTION_PSERIES(0x900, 0x900, decrementer)
- MASKABLE_EXCEPTION_HV(0x980, 0x982, decrementer)
+ STD_EXCEPTION_HV(0x980, 0x982, hdecrementer)
STD_EXCEPTION_PSERIES(0xa00, 0xa00, trap_0a)
KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xa00)
@@ -486,6 +486,7 @@ machine_check_common:
STD_EXCEPTION_COMMON_ASYNC(0x500, hardware_interrupt, do_IRQ)
STD_EXCEPTION_COMMON_ASYNC(0x900, decrementer, .timer_interrupt)
+ STD_EXCEPTION_COMMON(0x980, hdecrementer, .hdec_interrupt)
STD_EXCEPTION_COMMON(0xa00, trap_0a, .unknown_exception)
STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception)
STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception)
diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S
index 7140d838339..e11863f4e59 100644
--- a/arch/powerpc/kernel/idle_power7.S
+++ b/arch/powerpc/kernel/idle_power7.S
@@ -28,7 +28,9 @@ _GLOBAL(power7_idle)
lwz r4,ADDROFF(powersave_nap)(r3)
cmpwi 0,r4,0
beqlr
+ /* fall through */
+_GLOBAL(power7_nap)
/* NAP is a state loss, we create a regs frame on the
* stack, fill it up with the state we care about and
* stick a pointer to it in PACAR1. We really only
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 710f400476d..1a1f2ddfb58 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -802,16 +802,8 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
#endif /* CONFIG_PPC_STD_MMU_64 */
#ifdef CONFIG_PPC64
if (cpu_has_feature(CPU_FTR_DSCR)) {
- if (current->thread.dscr_inherit) {
- p->thread.dscr_inherit = 1;
- p->thread.dscr = current->thread.dscr;
- } else if (0 != dscr_default) {
- p->thread.dscr_inherit = 1;
- p->thread.dscr = dscr_default;
- } else {
- p->thread.dscr_inherit = 0;
- p->thread.dscr = 0;
- }
+ p->thread.dscr_inherit = current->thread.dscr_inherit;
+ p->thread.dscr = current->thread.dscr;
}
#endif
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 0321007086f..8d4214afc21 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -198,8 +198,15 @@ void smp_muxed_ipi_message_pass(int cpu, int msg)
struct cpu_messages *info = &per_cpu(ipi_message, cpu);
char *message = (char *)&info->messages;
+ /*
+ * Order previous accesses before accesses in the IPI handler.
+ */
+ smp_mb();
message[msg] = 1;
- mb();
+ /*
+ * cause_ipi functions are required to include a full barrier
+ * before doing whatever causes the IPI.
+ */
smp_ops->cause_ipi(cpu, info->data);
}
@@ -211,7 +218,7 @@ irqreturn_t smp_ipi_demux(void)
mb(); /* order any irq clear */
do {
- all = xchg_local(&info->messages, 0);
+ all = xchg(&info->messages, 0);
#ifdef __BIG_ENDIAN
if (all & (1 << (24 - 8 * PPC_MSG_CALL_FUNCTION)))
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index 3529446c2ab..8302af64921 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -194,6 +194,14 @@ static ssize_t show_dscr_default(struct device *dev,
return sprintf(buf, "%lx\n", dscr_default);
}
+static void update_dscr(void *dummy)
+{
+ if (!current->thread.dscr_inherit) {
+ current->thread.dscr = dscr_default;
+ mtspr(SPRN_DSCR, dscr_default);
+ }
+}
+
static ssize_t __used store_dscr_default(struct device *dev,
struct device_attribute *attr, const char *buf,
size_t count)
@@ -206,6 +214,8 @@ static ssize_t __used store_dscr_default(struct device *dev,
return -EINVAL;
dscr_default = val;
+ on_each_cpu(update_dscr, NULL, 1);
+
return count;
}
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index be171ee73bf..e49e93191b6 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -535,6 +535,15 @@ void timer_interrupt(struct pt_regs * regs)
trace_timer_interrupt_exit(regs);
}
+/*
+ * Hypervisor decrementer interrupts shouldn't occur but are sometimes
+ * left pending on exit from a KVM guest. We don't need to do anything
+ * to clear them, as they are edge-triggered.
+ */
+void hdec_interrupt(struct pt_regs *regs)
+{
+}
+
#ifdef CONFIG_SUSPEND
static void generic_suspend_disable_irqs(void)
{
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 158972341a2..ae0843fa7a6 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -972,8 +972,9 @@ static int emulate_instruction(struct pt_regs *regs)
cpu_has_feature(CPU_FTR_DSCR)) {
PPC_WARN_EMULATED(mtdscr, regs);
rd = (instword >> 21) & 0x1f;
- mtspr(SPRN_DSCR, regs->gpr[rd]);
+ current->thread.dscr = regs->gpr[rd];
current->thread.dscr_inherit = 1;
+ mtspr(SPRN_DSCR, current->thread.dscr);
return 0;
}
#endif
diff --git a/arch/powerpc/lib/code-patching.c b/arch/powerpc/lib/code-patching.c
index dd223b3eb33..17e5b236431 100644
--- a/arch/powerpc/lib/code-patching.c
+++ b/arch/powerpc/lib/code-patching.c
@@ -20,7 +20,7 @@ int patch_instruction(unsigned int *addr, unsigned int instr)
{
int err;
- err = __put_user(instr, addr);
+ __put_user_size(instr, addr, 4, err);
if (err)
return err;
asm ("dcbst 0, %0; sync; icbi 0,%0; sync; isync" : : "r" (addr));
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 39b159751c3..59213cfaeca 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -1436,11 +1436,11 @@ static long vphn_get_associativity(unsigned long cpu,
/*
* Update the node maps and sysfs entries for each cpu whose home node
- * has changed.
+ * has changed. Returns 1 when the topology has changed, and 0 otherwise.
*/
int arch_update_cpu_topology(void)
{
- int cpu, nid, old_nid;
+ int cpu, nid, old_nid, changed = 0;
unsigned int associativity[VPHN_ASSOC_BUFSIZE] = {0};
struct device *dev;
@@ -1466,9 +1466,10 @@ int arch_update_cpu_topology(void)
dev = get_cpu_device(cpu);
if (dev)
kobject_uevent(&dev->kobj, KOBJ_CHANGE);
+ changed = 1;
}
- return 1;
+ return changed;
}
static void topology_work_fn(struct work_struct *work)
diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c
index 3ef46254c35..7698b6e13c5 100644
--- a/arch/powerpc/platforms/powernv/smp.c
+++ b/arch/powerpc/platforms/powernv/smp.c
@@ -106,14 +106,6 @@ static void pnv_smp_cpu_kill_self(void)
{
unsigned int cpu;
- /* If powersave_nap is enabled, use NAP mode, else just
- * spin aimlessly
- */
- if (!powersave_nap) {
- generic_mach_cpu_die();
- return;
- }
-
/* Standard hot unplug procedure */
local_irq_disable();
idle_task_exit();
@@ -128,7 +120,7 @@ static void pnv_smp_cpu_kill_self(void)
*/
mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1);
while (!generic_check_cpu_restart(cpu)) {
- power7_idle();
+ power7_nap();
if (!generic_check_cpu_restart(cpu)) {
DBG("CPU%d Unexpected exit while offline !\n", cpu);
/* We may be getting an IPI, so we re-enable
diff --git a/arch/powerpc/sysdev/xics/icp-hv.c b/arch/powerpc/sysdev/xics/icp-hv.c
index 14469cf9df6..df0fc582146 100644
--- a/arch/powerpc/sysdev/xics/icp-hv.c
+++ b/arch/powerpc/sysdev/xics/icp-hv.c
@@ -65,7 +65,11 @@ static inline void icp_hv_set_xirr(unsigned int value)
static inline void icp_hv_set_qirr(int n_cpu , u8 value)
{
int hw_cpu = get_hard_smp_processor_id(n_cpu);
- long rc = plpar_hcall_norets(H_IPI, hw_cpu, value);
+ long rc;
+
+ /* Make sure all previous accesses are ordered before IPI sending */
+ mb();
+ rc = plpar_hcall_norets(H_IPI, hw_cpu, value);
if (rc != H_SUCCESS) {
pr_err("%s: bad return code qirr cpu=%d hw_cpu=%d mfrr=0x%x "
"returned %ld\n", __func__, n_cpu, hw_cpu, value, rc);
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index bbaf2c59830..457475f9841 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -409,7 +409,8 @@ int setup_one_line(struct line *lines, int n, char *init,
line->valid = 1;
err = parse_chan_pair(new, line, n, opts, error_out);
if (!err) {
- struct device *d = tty_register_device(driver, n, NULL);
+ struct device *d = tty_port_register_device(&line->port,
+ driver, n, NULL);
if (IS_ERR(d)) {
*error_out = "Failed to register device";
err = PTR_ERR(d);
diff --git a/arch/um/os-Linux/time.c b/arch/um/os-Linux/time.c
index f60238559af..0748fe0c8a7 100644
--- a/arch/um/os-Linux/time.c
+++ b/arch/um/os-Linux/time.c
@@ -114,7 +114,7 @@ static void deliver_alarm(void)
skew += this_tick - last_tick;
while (skew >= one_tick) {
- alarm_handler(SIGVTALRM, NULL);
+ alarm_handler(SIGVTALRM, NULL, NULL);
skew -= one_tick;
}
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index b65a76133f4..5141d808e75 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -1283,7 +1283,7 @@ static void xen_flush_tlb_others(const struct cpumask *cpus,
cpumask_clear_cpu(smp_processor_id(), to_cpumask(args->mask));
args->op.cmd = MMUEXT_TLB_FLUSH_MULTI;
- if (start != TLB_FLUSH_ALL && (end - start) <= PAGE_SIZE) {
+ if (end != TLB_FLUSH_ALL && (end - start) <= PAGE_SIZE) {
args->op.cmd = MMUEXT_INVLPG_MULTI;
args->op.arg1.linear_addr = start;
}
diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c
index d4b25546325..76ba0e97e53 100644
--- a/arch/x86/xen/p2m.c
+++ b/arch/x86/xen/p2m.c
@@ -599,7 +599,7 @@ bool __init early_can_reuse_p2m_middle(unsigned long set_pfn, unsigned long set_
if (p2m_index(set_pfn))
return false;
- for (pfn = 0; pfn <= MAX_DOMAIN_PAGES; pfn += P2M_PER_PAGE) {
+ for (pfn = 0; pfn < MAX_DOMAIN_PAGES; pfn += P2M_PER_PAGE) {
topidx = p2m_top_index(pfn);
if (!p2m_top[topidx])
diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c
index f9726f6afdf..2cd3d3a3400 100644
--- a/arch/xtensa/platforms/iss/console.c
+++ b/arch/xtensa/platforms/iss/console.c
@@ -223,6 +223,7 @@ int __init rs_init(void)
serial_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(serial_driver, &serial_ops);
+ tty_port_link_device(&serial_port, serial_driver, 0);
if (tty_register_driver(serial_driver))
panic("Couldn't register serial driver\n");
diff --git a/drivers/base/dma-contiguous.c b/drivers/base/dma-contiguous.c
index 78efb0306a4..34d94c762a1 100644
--- a/drivers/base/dma-contiguous.c
+++ b/drivers/base/dma-contiguous.c
@@ -250,7 +250,7 @@ int __init dma_declare_contiguous(struct device *dev, unsigned long size,
return -EINVAL;
/* Sanitise input arguments */
- alignment = PAGE_SIZE << max(MAX_ORDER, pageblock_order);
+ alignment = PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order);
base = ALIGN(base, alignment);
size = ALIGN(size, alignment);
limit &= ~(alignment - 1);
diff --git a/drivers/bluetooth/hci_ath.c b/drivers/bluetooth/hci_ath.c
index 12172a6a95c..0bc8a6a6a14 100644
--- a/drivers/bluetooth/hci_ath.c
+++ b/drivers/bluetooth/hci_ath.c
@@ -58,7 +58,7 @@ static int ath_wakeup_ar3k(struct tty_struct *tty)
return status;
/* Disable Automatic RTSCTS */
- memcpy(&ktermios, tty->termios, sizeof(ktermios));
+ ktermios = tty->termios;
ktermios.c_cflag &= ~CRTSCTS;
tty_set_termios(tty, &ktermios);
diff --git a/drivers/char/mwave/mwavedd.c b/drivers/char/mwave/mwavedd.c
index 1d82d5838f0..164544afd68 100644
--- a/drivers/char/mwave/mwavedd.c
+++ b/drivers/char/mwave/mwavedd.c
@@ -430,7 +430,7 @@ static ssize_t mwave_write(struct file *file, const char __user *buf,
static int register_serial_portandirq(unsigned int port, int irq)
{
- struct uart_port uart;
+ struct uart_8250_port uart;
switch ( port ) {
case 0x3f8:
@@ -462,14 +462,14 @@ static int register_serial_portandirq(unsigned int port, int irq)
} /* switch */
/* irq is okay */
- memset(&uart, 0, sizeof(struct uart_port));
+ memset(&uart, 0, sizeof(uart));
- uart.uartclk = 1843200;
- uart.iobase = port;
- uart.irq = irq;
- uart.iotype = UPIO_PORT;
- uart.flags = UPF_SHARE_IRQ;
- return serial8250_register_port(&uart);
+ uart.port.uartclk = 1843200;
+ uart.port.iobase = port;
+ uart.port.irq = irq;
+ uart.port.iotype = UPIO_PORT;
+ uart.port.flags = UPF_SHARE_IRQ;
+ return serial8250_register_8250_port(&uart);
}
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index 0a484b4a1b0..3f57d5de395 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -1050,7 +1050,7 @@ static void cts_change(MGSLPC_INFO *info, struct tty_struct *tty)
wake_up_interruptible(&info->status_event_wait_q);
wake_up_interruptible(&info->event_wait_q);
- if (info->port.flags & ASYNC_CTS_FLOW) {
+ if (tty_port_cts_enabled(&info->port)) {
if (tty->hw_stopped) {
if (info->serial_signals & SerialSignal_CTS) {
if (debug_level >= DEBUG_LEVEL_ISR)
@@ -1344,7 +1344,7 @@ static void shutdown(MGSLPC_INFO * info, struct tty_struct *tty)
/* TODO:disable interrupts instead of reset to preserve signal states */
reset_device(info);
- if (!tty || tty->termios->c_cflag & HUPCL) {
+ if (!tty || tty->termios.c_cflag & HUPCL) {
info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
set_signals(info);
}
@@ -1385,7 +1385,7 @@ static void mgslpc_program_hw(MGSLPC_INFO *info, struct tty_struct *tty)
port_irq_enable(info, (unsigned char) PVR_DSR | PVR_RI);
get_signals(info);
- if (info->netcount || (tty && (tty->termios->c_cflag & CREAD)))
+ if (info->netcount || (tty && (tty->termios.c_cflag & CREAD)))
rx_start(info);
spin_unlock_irqrestore(&info->lock,flags);
@@ -1398,14 +1398,14 @@ static void mgslpc_change_params(MGSLPC_INFO *info, struct tty_struct *tty)
unsigned cflag;
int bits_per_char;
- if (!tty || !tty->termios)
+ if (!tty)
return;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgslpc_change_params(%s)\n",
__FILE__,__LINE__, info->device_name );
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
/* if B0 rate (hangup) specified then negate DTR and RTS */
/* otherwise assert DTR and RTS */
@@ -1728,7 +1728,7 @@ static void mgslpc_throttle(struct tty_struct * tty)
if (I_IXOFF(tty))
mgslpc_send_xchar(tty, STOP_CHAR(tty));
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
spin_lock_irqsave(&info->lock,flags);
info->serial_signals &= ~SerialSignal_RTS;
set_signals(info);
@@ -1757,7 +1757,7 @@ static void mgslpc_unthrottle(struct tty_struct * tty)
mgslpc_send_xchar(tty, START_CHAR(tty));
}
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
spin_lock_irqsave(&info->lock,flags);
info->serial_signals |= SerialSignal_RTS;
set_signals(info);
@@ -2293,8 +2293,8 @@ static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_term
tty->driver->name );
/* just return if nothing has changed */
- if ((tty->termios->c_cflag == old_termios->c_cflag)
- && (RELEVANT_IFLAG(tty->termios->c_iflag)
+ if ((tty->termios.c_cflag == old_termios->c_cflag)
+ && (RELEVANT_IFLAG(tty->termios.c_iflag)
== RELEVANT_IFLAG(old_termios->c_iflag)))
return;
@@ -2302,7 +2302,7 @@ static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_term
/* Handle transition to B0 status */
if (old_termios->c_cflag & CBAUD &&
- !(tty->termios->c_cflag & CBAUD)) {
+ !(tty->termios.c_cflag & CBAUD)) {
info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
spin_lock_irqsave(&info->lock,flags);
set_signals(info);
@@ -2311,9 +2311,9 @@ static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_term
/* Handle transition away from B0 status */
if (!(old_termios->c_cflag & CBAUD) &&
- tty->termios->c_cflag & CBAUD) {
+ tty->termios.c_cflag & CBAUD) {
info->serial_signals |= SerialSignal_DTR;
- if (!(tty->termios->c_cflag & CRTSCTS) ||
+ if (!(tty->termios.c_cflag & CRTSCTS) ||
!test_bit(TTY_THROTTLED, &tty->flags)) {
info->serial_signals |= SerialSignal_RTS;
}
@@ -2324,7 +2324,7 @@ static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_term
/* Handle turning off CRTSCTS */
if (old_termios->c_cflag & CRTSCTS &&
- !(tty->termios->c_cflag & CRTSCTS)) {
+ !(tty->termios.c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
tx_release(tty);
}
@@ -2731,6 +2731,8 @@ static void mgslpc_add_device(MGSLPC_INFO *info)
#if SYNCLINK_GENERIC_HDLC
hdlcdev_init(info);
#endif
+ tty_port_register_device(&info->port, serial_driver, info->line,
+ &info->p_dev->dev);
}
static void mgslpc_remove_device(MGSLPC_INFO *remove_info)
@@ -2744,6 +2746,7 @@ static void mgslpc_remove_device(MGSLPC_INFO *remove_info)
last->next_device = info->next_device;
else
mgslpc_device_list = info->next_device;
+ tty_unregister_device(serial_driver, info->line);
#if SYNCLINK_GENERIC_HDLC
hdlcdev_exit(info);
#endif
@@ -2798,77 +2801,63 @@ static const struct tty_operations mgslpc_ops = {
.proc_fops = &mgslpc_proc_fops,
};
-static void synclink_cs_cleanup(void)
+static int __init synclink_cs_init(void)
{
int rc;
- while(mgslpc_device_list)
- mgslpc_remove_device(mgslpc_device_list);
-
- if (serial_driver) {
- if ((rc = tty_unregister_driver(serial_driver)))
- printk("%s(%d) failed to unregister tty driver err=%d\n",
- __FILE__,__LINE__,rc);
- put_tty_driver(serial_driver);
+ if (break_on_load) {
+ mgslpc_get_text_ptr();
+ BREAKPOINT();
}
- pcmcia_unregister_driver(&mgslpc_driver);
-}
-
-static int __init synclink_cs_init(void)
-{
- int rc;
-
- if (break_on_load) {
- mgslpc_get_text_ptr();
- BREAKPOINT();
- }
-
- if ((rc = pcmcia_register_driver(&mgslpc_driver)) < 0)
- return rc;
-
- serial_driver = alloc_tty_driver(MAX_DEVICE_COUNT);
- if (!serial_driver) {
- rc = -ENOMEM;
- goto error;
- }
+ serial_driver = tty_alloc_driver(MAX_DEVICE_COUNT,
+ TTY_DRIVER_REAL_RAW |
+ TTY_DRIVER_DYNAMIC_DEV);
+ if (IS_ERR(serial_driver)) {
+ rc = PTR_ERR(serial_driver);
+ goto err;
+ }
- /* Initialize the tty_driver structure */
-
- serial_driver->driver_name = "synclink_cs";
- serial_driver->name = "ttySLP";
- serial_driver->major = ttymajor;
- serial_driver->minor_start = 64;
- serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
- serial_driver->subtype = SERIAL_TYPE_NORMAL;
- serial_driver->init_termios = tty_std_termios;
- serial_driver->init_termios.c_cflag =
- B9600 | CS8 | CREAD | HUPCL | CLOCAL;
- serial_driver->flags = TTY_DRIVER_REAL_RAW;
- tty_set_operations(serial_driver, &mgslpc_ops);
-
- if ((rc = tty_register_driver(serial_driver)) < 0) {
- printk("%s(%d):Couldn't register serial driver\n",
- __FILE__,__LINE__);
- put_tty_driver(serial_driver);
- serial_driver = NULL;
- goto error;
- }
+ /* Initialize the tty_driver structure */
+ serial_driver->driver_name = "synclink_cs";
+ serial_driver->name = "ttySLP";
+ serial_driver->major = ttymajor;
+ serial_driver->minor_start = 64;
+ serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
+ serial_driver->subtype = SERIAL_TYPE_NORMAL;
+ serial_driver->init_termios = tty_std_termios;
+ serial_driver->init_termios.c_cflag =
+ B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ tty_set_operations(serial_driver, &mgslpc_ops);
+
+ rc = tty_register_driver(serial_driver);
+ if (rc < 0) {
+ printk(KERN_ERR "%s(%d):Couldn't register serial driver\n",
+ __FILE__, __LINE__);
+ goto err_put_tty;
+ }
- printk("%s %s, tty major#%d\n",
- driver_name, driver_version,
- serial_driver->major);
+ rc = pcmcia_register_driver(&mgslpc_driver);
+ if (rc < 0)
+ goto err_unreg_tty;
- return 0;
+ printk(KERN_INFO "%s %s, tty major#%d\n", driver_name, driver_version,
+ serial_driver->major);
-error:
- synclink_cs_cleanup();
- return rc;
+ return 0;
+err_unreg_tty:
+ tty_unregister_driver(serial_driver);
+err_put_tty:
+ put_tty_driver(serial_driver);
+err:
+ return rc;
}
static void __exit synclink_cs_exit(void)
{
- synclink_cs_cleanup();
+ pcmcia_unregister_driver(&mgslpc_driver);
+ tty_unregister_driver(serial_driver);
+ put_tty_driver(serial_driver);
}
module_init(synclink_cs_init);
diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c
index 46b77ede84c..af98f6d6509 100644
--- a/drivers/char/ttyprintk.c
+++ b/drivers/char/ttyprintk.c
@@ -67,7 +67,7 @@ static int tpk_printk(const unsigned char *buf, int count)
tmp[tpk_curr + 1] = '\0';
printk(KERN_INFO "%s%s", tpk_tag, tmp);
tpk_curr = 0;
- if (buf[i + 1] == '\n')
+ if ((i + 1) < count && buf[i + 1] == '\n')
i++;
break;
case '\n':
@@ -178,11 +178,17 @@ static struct tty_driver *ttyprintk_driver;
static int __init ttyprintk_init(void)
{
int ret = -ENOMEM;
- void *rp;
- ttyprintk_driver = alloc_tty_driver(1);
- if (!ttyprintk_driver)
- return ret;
+ tty_port_init(&tpk_port.port);
+ tpk_port.port.ops = &null_ops;
+ mutex_init(&tpk_port.port_write_mutex);
+
+ ttyprintk_driver = tty_alloc_driver(1,
+ TTY_DRIVER_RESET_TERMIOS |
+ TTY_DRIVER_REAL_RAW |
+ TTY_DRIVER_UNNUMBERED_NODE);
+ if (IS_ERR(ttyprintk_driver))
+ return PTR_ERR(ttyprintk_driver);
ttyprintk_driver->driver_name = "ttyprintk";
ttyprintk_driver->name = "ttyprintk";
@@ -191,9 +197,8 @@ static int __init ttyprintk_init(void)
ttyprintk_driver->type = TTY_DRIVER_TYPE_CONSOLE;
ttyprintk_driver->init_termios = tty_std_termios;
ttyprintk_driver->init_termios.c_oflag = OPOST | OCRNL | ONOCR | ONLRET;
- ttyprintk_driver->flags = TTY_DRIVER_RESET_TERMIOS |
- TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
tty_set_operations(ttyprintk_driver, &ttyprintk_ops);
+ tty_port_link_device(&tpk_port.port, ttyprintk_driver, 0);
ret = tty_register_driver(ttyprintk_driver);
if (ret < 0) {
@@ -201,22 +206,10 @@ static int __init ttyprintk_init(void)
goto error;
}
- /* create our unnumbered device */
- rp = device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 3), NULL,
- ttyprintk_driver->name);
- if (IS_ERR(rp)) {
- printk(KERN_ERR "Couldn't create ttyprintk device\n");
- ret = PTR_ERR(rp);
- goto error;
- }
-
- tty_port_init(&tpk_port.port);
- tpk_port.port.ops = &null_ops;
- mutex_init(&tpk_port.port_write_mutex);
-
return 0;
error:
+ tty_unregister_driver(ttyprintk_driver);
put_tty_driver(ttyprintk_driver);
ttyprintk_driver = NULL;
return ret;
diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c
index ae056182613..2e166277766 100644
--- a/drivers/dma/omap-dma.c
+++ b/drivers/dma/omap-dma.c
@@ -18,6 +18,8 @@
#include <linux/spinlock.h>
#include "virt-dma.h"
+
+#include <plat/cpu.h>
#include <plat/dma.h>
struct omap_dmadev {
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index b16c8a72a2e..ba7926f5c09 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -294,7 +294,7 @@ config GPIO_MAX732X_IRQ
config GPIO_MC9S08DZ60
bool "MX35 3DS BOARD MC9S08DZ60 GPIO functions"
- depends on I2C && MACH_MX35_3DS
+ depends on I2C=y && MACH_MX35_3DS
help
Select this to enable the MC9S08DZ60 GPIO driver
diff --git a/drivers/gpio/gpio-em.c b/drivers/gpio/gpio-em.c
index ae37181798b..ec48ed51262 100644
--- a/drivers/gpio/gpio-em.c
+++ b/drivers/gpio/gpio-em.c
@@ -247,9 +247,9 @@ static int __devinit em_gio_irq_domain_init(struct em_gio_priv *p)
p->irq_base = irq_alloc_descs(pdata->irq_base, 0,
pdata->number_of_pins, numa_node_id());
- if (IS_ERR_VALUE(p->irq_base)) {
+ if (p->irq_base < 0) {
dev_err(&pdev->dev, "cannot get irq_desc\n");
- return -ENXIO;
+ return p->irq_base;
}
pr_debug("gio: hw base = %d, nr = %d, sw base = %d\n",
pdata->gpio_base, pdata->number_of_pins, p->irq_base);
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index e6efd77668f..64fbce30c50 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -25,11 +25,9 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/irqdomain.h>
+#include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <mach/irqs.h>
-#include <asm/gpio.h>
#include <asm/mach/irq.h>
#define OFF_MODE 1
@@ -385,13 +383,16 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio,
static int gpio_irq_type(struct irq_data *d, unsigned type)
{
struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
- unsigned gpio;
+ unsigned gpio = 0;
int retval;
unsigned long flags;
- if (!cpu_class_is_omap2() && d->irq > IH_MPUIO_BASE)
+#ifdef CONFIG_ARCH_OMAP1
+ if (d->irq > IH_MPUIO_BASE)
gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE);
- else
+#endif
+
+ if (!gpio)
gpio = irq_to_gpio(bank, d->irq);
if (type & ~IRQ_TYPE_SENSE_MASK)
diff --git a/drivers/gpio/gpio-rdc321x.c b/drivers/gpio/gpio-rdc321x.c
index e97016af644..b62d443e9a5 100644
--- a/drivers/gpio/gpio-rdc321x.c
+++ b/drivers/gpio/gpio-rdc321x.c
@@ -170,6 +170,7 @@ static int __devinit rdc321x_gpio_probe(struct platform_device *pdev)
rdc321x_gpio_dev->reg2_data_base = r->start + 0x4;
rdc321x_gpio_dev->chip.label = "rdc321x-gpio";
+ rdc321x_gpio_dev->chip.owner = THIS_MODULE;
rdc321x_gpio_dev->chip.direction_input = rdc_gpio_direction_input;
rdc321x_gpio_dev->chip.direction_output = rdc_gpio_config;
rdc321x_gpio_dev->chip.get = rdc_gpio_get_value;
diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c
index 94256fe7bf3..c5f8ca233e1 100644
--- a/drivers/gpio/gpio-twl4030.c
+++ b/drivers/gpio/gpio-twl4030.c
@@ -51,6 +51,7 @@
static struct gpio_chip twl_gpiochip;
+static int twl4030_gpio_base;
static int twl4030_gpio_irq_base;
/* genirq interfaces are not available to modules */
@@ -395,6 +396,29 @@ static int __devinit gpio_twl4030_debounce(u32 debounce, u8 mmc_cd)
static int gpio_twl4030_remove(struct platform_device *pdev);
+static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev)
+{
+ struct twl4030_gpio_platform_data *omap_twl_info;
+
+ omap_twl_info = devm_kzalloc(dev, sizeof(*omap_twl_info), GFP_KERNEL);
+ if (!omap_twl_info)
+ return NULL;
+
+ omap_twl_info->use_leds = of_property_read_bool(dev->of_node,
+ "ti,use-leds");
+
+ of_property_read_u32(dev->of_node, "ti,debounce",
+ &omap_twl_info->debounce);
+ of_property_read_u32(dev->of_node, "ti,mmc-cd",
+ (u32 *)&omap_twl_info->mmc_cd);
+ of_property_read_u32(dev->of_node, "ti,pullups",
+ &omap_twl_info->pullups);
+ of_property_read_u32(dev->of_node, "ti,pulldowns",
+ &omap_twl_info->pulldowns);
+
+ return omap_twl_info;
+}
+
static int __devinit gpio_twl4030_probe(struct platform_device *pdev)
{
struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data;
@@ -427,49 +451,57 @@ no_irqs:
twl_gpiochip.ngpio = TWL4030_GPIO_MAX;
twl_gpiochip.dev = &pdev->dev;
- if (pdata) {
- twl_gpiochip.base = pdata->gpio_base;
+ if (node)
+ pdata = of_gpio_twl4030(&pdev->dev);
- /*
- * NOTE: boards may waste power if they don't set pullups
- * and pulldowns correctly ... default for non-ULPI pins is
- * pulldown, and some other pins may have external pullups
- * or pulldowns. Careful!
- */
- ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns);
- if (ret)
- dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n",
- pdata->pullups, pdata->pulldowns,
- ret);
-
- ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd);
- if (ret)
- dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n",
- pdata->debounce, pdata->mmc_cd,
- ret);
-
- /*
- * NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE,
- * is (still) clear if use_leds is set.
- */
- if (pdata->use_leds)
- twl_gpiochip.ngpio += 2;
+ if (pdata == NULL) {
+ dev_err(&pdev->dev, "Platform data is missing\n");
+ return -ENXIO;
}
+ /*
+ * NOTE: boards may waste power if they don't set pullups
+ * and pulldowns correctly ... default for non-ULPI pins is
+ * pulldown, and some other pins may have external pullups
+ * or pulldowns. Careful!
+ */
+ ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns);
+ if (ret)
+ dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n",
+ pdata->pullups, pdata->pulldowns, ret);
+
+ ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd);
+ if (ret)
+ dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n",
+ pdata->debounce, pdata->mmc_cd, ret);
+
+ /*
+ * NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE,
+ * is (still) clear if use_leds is set.
+ */
+ if (pdata->use_leds)
+ twl_gpiochip.ngpio += 2;
+
ret = gpiochip_add(&twl_gpiochip);
if (ret < 0) {
dev_err(&pdev->dev, "could not register gpiochip, %d\n", ret);
twl_gpiochip.ngpio = 0;
gpio_twl4030_remove(pdev);
- } else if (pdata && pdata->setup) {
+ goto out;
+ }
+
+ twl4030_gpio_base = twl_gpiochip.base;
+
+ if (pdata && pdata->setup) {
int status;
status = pdata->setup(&pdev->dev,
- pdata->gpio_base, TWL4030_GPIO_MAX);
+ twl4030_gpio_base, TWL4030_GPIO_MAX);
if (status)
dev_dbg(&pdev->dev, "setup --> %d\n", status);
}
+out:
return ret;
}
@@ -481,7 +513,7 @@ static int gpio_twl4030_remove(struct platform_device *pdev)
if (pdata && pdata->teardown) {
status = pdata->teardown(&pdev->dev,
- pdata->gpio_base, TWL4030_GPIO_MAX);
+ twl4030_gpio_base, TWL4030_GPIO_MAX);
if (status) {
dev_dbg(&pdev->dev, "teardown --> %d\n", status);
return status;
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index a18c4aa68b1..f1a45997aea 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -82,7 +82,7 @@ int of_get_named_gpio_flags(struct device_node *np, const char *propname,
gpiochip_find(&gg_data, of_gpiochip_find_and_xlate);
of_node_put(gg_data.gpiospec.np);
- pr_debug("%s exited with status %d\n", __func__, ret);
+ pr_debug("%s exited with status %d\n", __func__, gg_data.out_gpio);
return gg_data.out_gpio;
}
EXPORT_SYMBOL(of_get_named_gpio_flags);
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 8bf8a64e511..8bcd168fffa 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -996,7 +996,8 @@ static void hid_process_event(struct hid_device *hid, struct hid_field *field,
struct hid_driver *hdrv = hid->driver;
int ret;
- hid_dump_input(hid, usage, value);
+ if (!list_empty(&hid->debug_list))
+ hid_dump_input(hid, usage, value);
if (hdrv && hdrv->event && hid_match_usage(hid, usage)) {
ret = hdrv->event(hid, field, usage, value);
@@ -1558,7 +1559,9 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_M610X) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LCPOWER, USB_DEVICE_ID_LCPOWER_LC1000 ) },
- { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_TPKBD) },
+#if IS_ENABLED(CONFIG_HID_LENOVO_TPKBD)
+ { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_TPKBD) },
+#endif
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER_2) },
diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
index 0f9c146fc00..4d524b5f52f 100644
--- a/drivers/hid/hid-logitech-dj.c
+++ b/drivers/hid/hid-logitech-dj.c
@@ -439,7 +439,7 @@ static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev)
struct dj_report *dj_report;
int retval;
- dj_report = kzalloc(sizeof(dj_report), GFP_KERNEL);
+ dj_report = kzalloc(sizeof(struct dj_report), GFP_KERNEL);
if (!dj_report)
return -ENOMEM;
dj_report->report_id = REPORT_ID_DJ_SHORT;
@@ -456,7 +456,7 @@ static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev,
struct dj_report *dj_report;
int retval;
- dj_report = kzalloc(sizeof(dj_report), GFP_KERNEL);
+ dj_report = kzalloc(sizeof(struct dj_report), GFP_KERNEL);
if (!dj_report)
return -ENOMEM;
dj_report->report_id = REPORT_ID_DJ_SHORT;
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 903eef3d3e1..991e85c7325 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -70,6 +70,7 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_AXIS_295, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN2, HID_QUIRK_NO_INIT_REPORTS },
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index c50fa75416f..b4b65af8612 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -533,7 +533,7 @@ config KEYBOARD_DAVINCI
config KEYBOARD_OMAP
tristate "TI OMAP keypad support"
- depends on (ARCH_OMAP1 || ARCH_OMAP2)
+ depends on ARCH_OMAP1
select INPUT_MATRIXKMAP
help
Say Y here if you want to use the OMAP keypad.
diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c
index ff4c0a87a25..ce68e361558 100644
--- a/drivers/input/keyboard/imx_keypad.c
+++ b/drivers/input/keyboard/imx_keypad.c
@@ -358,6 +358,7 @@ static void imx_keypad_inhibit(struct imx_keypad *keypad)
/* Inhibit KDI and KRI interrupts. */
reg_val = readw(keypad->mmio_base + KPSR);
reg_val &= ~(KBD_STAT_KRIE | KBD_STAT_KDIE);
+ reg_val |= KBD_STAT_KPKR | KBD_STAT_KPKD;
writew(reg_val, keypad->mmio_base + KPSR);
/* Colums as open drain and disable all rows */
@@ -515,7 +516,9 @@ static int __devinit imx_keypad_probe(struct platform_device *pdev)
input_set_drvdata(input_dev, keypad);
/* Ensure that the keypad will stay dormant until opened */
+ clk_enable(keypad->clk);
imx_keypad_inhibit(keypad);
+ clk_disable(keypad->clk);
error = request_irq(irq, imx_keypad_irq_handler, 0,
pdev->name, keypad);
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index a0222db4dc8..2bda5f0b9c6 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -35,13 +35,9 @@
#include <linux/mutex.h>
#include <linux/errno.h>
#include <linux/slab.h>
-#include <asm/gpio.h>
+#include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
#include <plat/keypad.h>
-#include <plat/menelaus.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <asm/io.h>
-#include <plat/mux.h>
#undef NEW_BOARD_LEARNING_MODE
@@ -96,28 +92,8 @@ static u8 get_row_gpio_val(struct omap_kp *omap_kp)
static irqreturn_t omap_kp_interrupt(int irq, void *dev_id)
{
- struct omap_kp *omap_kp = dev_id;
-
/* disable keyboard interrupt and schedule for handling */
- if (cpu_is_omap24xx()) {
- int i;
-
- for (i = 0; i < omap_kp->rows; i++) {
- int gpio_irq = gpio_to_irq(row_gpios[i]);
- /*
- * The interrupt which we're currently handling should
- * be disabled _nosync() to avoid deadlocks waiting
- * for this handler to complete. All others should
- * be disabled the regular way for SMP safety.
- */
- if (gpio_irq == irq)
- disable_irq_nosync(gpio_irq);
- else
- disable_irq(gpio_irq);
- }
- } else
- /* disable keyboard interrupt and schedule for handling */
- omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+ omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
tasklet_schedule(&kp_tasklet);
@@ -133,33 +109,22 @@ static void omap_kp_scan_keypad(struct omap_kp *omap_kp, unsigned char *state)
{
int col = 0;
- /* read the keypad status */
- if (cpu_is_omap24xx()) {
- /* read the keypad status */
- for (col = 0; col < omap_kp->cols; col++) {
- set_col_gpio_val(omap_kp, ~(1 << col));
- state[col] = ~(get_row_gpio_val(omap_kp)) & 0xff;
- }
- set_col_gpio_val(omap_kp, 0);
-
- } else {
- /* disable keyboard interrupt and schedule for handling */
- omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+ /* disable keyboard interrupt and schedule for handling */
+ omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
- /* read the keypad status */
- omap_writew(0xff, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
- for (col = 0; col < omap_kp->cols; col++) {
- omap_writew(~(1 << col) & 0xff,
- OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
+ /* read the keypad status */
+ omap_writew(0xff, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
+ for (col = 0; col < omap_kp->cols; col++) {
+ omap_writew(~(1 << col) & 0xff,
+ OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
- udelay(omap_kp->delay);
+ udelay(omap_kp->delay);
- state[col] = ~omap_readw(OMAP1_MPUIO_BASE +
- OMAP_MPUIO_KBR_LATCH) & 0xff;
- }
- omap_writew(0x00, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
- udelay(2);
+ state[col] = ~omap_readw(OMAP1_MPUIO_BASE +
+ OMAP_MPUIO_KBR_LATCH) & 0xff;
}
+ omap_writew(0x00, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
+ udelay(2);
}
static void omap_kp_tasklet(unsigned long data)
@@ -222,14 +187,8 @@ static void omap_kp_tasklet(unsigned long data)
mod_timer(&omap_kp_data->timer, jiffies + delay);
} else {
/* enable interrupts */
- if (cpu_is_omap24xx()) {
- int i;
- for (i = 0; i < omap_kp_data->rows; i++)
- enable_irq(gpio_to_irq(row_gpios[i]));
- } else {
- omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
- kp_cur_group = -1;
- }
+ omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+ kp_cur_group = -1;
}
}
@@ -242,6 +201,7 @@ static ssize_t omap_kp_enable_show(struct device *dev,
static ssize_t omap_kp_enable_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
+ struct omap_kp *omap_kp = dev_get_drvdata(dev);
int state;
if (sscanf(buf, "%u", &state) != 1)
@@ -253,9 +213,9 @@ static ssize_t omap_kp_enable_store(struct device *dev, struct device_attribute
mutex_lock(&kp_enable_mutex);
if (state != kp_enable) {
if (state)
- enable_irq(INT_KEYBOARD);
+ enable_irq(omap_kp->irq);
else
- disable_irq(INT_KEYBOARD);
+ disable_irq(omap_kp->irq);
kp_enable = state;
}
mutex_unlock(&kp_enable_mutex);
@@ -289,7 +249,7 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
struct omap_kp *omap_kp;
struct input_dev *input_dev;
struct omap_kp_platform_data *pdata = pdev->dev.platform_data;
- int i, col_idx, row_idx, irq_idx, ret;
+ int i, col_idx, row_idx, ret;
unsigned int row_shift, keycodemax;
if (!pdata->rows || !pdata->cols || !pdata->keymap_data) {
@@ -314,8 +274,7 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
omap_kp->input = input_dev;
/* Disable the interrupt for the MPUIO keyboard */
- if (!cpu_is_omap24xx())
- omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+ omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
if (pdata->delay)
omap_kp->delay = pdata->delay;
@@ -328,31 +287,8 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
omap_kp->rows = pdata->rows;
omap_kp->cols = pdata->cols;
- if (cpu_is_omap24xx()) {
- /* Cols: outputs */
- for (col_idx = 0; col_idx < omap_kp->cols; col_idx++) {
- if (gpio_request(col_gpios[col_idx], "omap_kp_col") < 0) {
- printk(KERN_ERR "Failed to request"
- "GPIO%d for keypad\n",
- col_gpios[col_idx]);
- goto err1;
- }
- gpio_direction_output(col_gpios[col_idx], 0);
- }
- /* Rows: inputs */
- for (row_idx = 0; row_idx < omap_kp->rows; row_idx++) {
- if (gpio_request(row_gpios[row_idx], "omap_kp_row") < 0) {
- printk(KERN_ERR "Failed to request"
- "GPIO%d for keypad\n",
- row_gpios[row_idx]);
- goto err2;
- }
- gpio_direction_input(row_gpios[row_idx]);
- }
- } else {
- col_idx = 0;
- row_idx = 0;
- }
+ col_idx = 0;
+ row_idx = 0;
setup_timer(&omap_kp->timer, omap_kp_timer, (unsigned long)omap_kp);
@@ -394,27 +330,16 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
/* scan current status and enable interrupt */
omap_kp_scan_keypad(omap_kp, keypad_state);
- if (!cpu_is_omap24xx()) {
- omap_kp->irq = platform_get_irq(pdev, 0);
- if (omap_kp->irq >= 0) {
- if (request_irq(omap_kp->irq, omap_kp_interrupt, 0,
- "omap-keypad", omap_kp) < 0)
- goto err4;
- }
- omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
- } else {
- for (irq_idx = 0; irq_idx < omap_kp->rows; irq_idx++) {
- if (request_irq(gpio_to_irq(row_gpios[irq_idx]),
- omap_kp_interrupt,
- IRQF_TRIGGER_FALLING,
- "omap-keypad", omap_kp) < 0)
- goto err5;
- }
+ omap_kp->irq = platform_get_irq(pdev, 0);
+ if (omap_kp->irq >= 0) {
+ if (request_irq(omap_kp->irq, omap_kp_interrupt, 0,
+ "omap-keypad", omap_kp) < 0)
+ goto err4;
}
+ omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+
return 0;
-err5:
- for (i = irq_idx - 1; i >=0; i--)
- free_irq(row_gpios[i], omap_kp);
+
err4:
input_unregister_device(omap_kp->input);
input_dev = NULL;
@@ -423,7 +348,6 @@ err3:
err2:
for (i = row_idx - 1; i >=0; i--)
gpio_free(row_gpios[i]);
-err1:
for (i = col_idx - 1; i >=0; i--)
gpio_free(col_gpios[i]);
@@ -439,18 +363,8 @@ static int __devexit omap_kp_remove(struct platform_device *pdev)
/* disable keypad interrupt handling */
tasklet_disable(&kp_tasklet);
- if (cpu_is_omap24xx()) {
- int i;
- for (i = 0; i < omap_kp->cols; i++)
- gpio_free(col_gpios[i]);
- for (i = 0; i < omap_kp->rows; i++) {
- gpio_free(row_gpios[i]);
- free_irq(gpio_to_irq(row_gpios[i]), omap_kp);
- }
- } else {
- omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
- free_irq(omap_kp->irq, omap_kp);
- }
+ omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+ free_irq(omap_kp->irq, omap_kp);
del_timer_sync(&omap_kp->timer);
tasklet_kill(&kp_tasklet);
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 5ec774d6c82..6918773ce02 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -177,6 +177,20 @@ static const struct dmi_system_id __initconst i8042_dmi_noloop_table[] = {
},
},
{
+ /* Gigabyte T1005 - defines wrong chassis type ("Other") */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "T1005"),
+ },
+ },
+ {
+ /* Gigabyte T1005M/P - defines wrong chassis type ("Other") */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "T1005M/P"),
+ },
+ },
+ {
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv9700"),
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 002041975de..532d067a9e0 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -1848,7 +1848,10 @@ static const struct wacom_features wacom_features_0x2A =
{ "Wacom Intuos5 M", WACOM_PKGLEN_INTUOS, 44704, 27940, 2047,
63, INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
static const struct wacom_features wacom_features_0xF4 =
- { "Wacom Cintiq 24HD", WACOM_PKGLEN_INTUOS, 104480, 65600, 2047,
+ { "Wacom Cintiq 24HD", WACOM_PKGLEN_INTUOS, 104480, 65600, 2047,
+ 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+static const struct wacom_features wacom_features_0xF8 =
+ { "Wacom Cintiq 24HD touch", WACOM_PKGLEN_INTUOS, 104480, 65600, 2047,
63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
static const struct wacom_features wacom_features_0x3F =
{ "Wacom Cintiq 21UX", WACOM_PKGLEN_INTUOS, 87200, 65600, 1023,
@@ -2091,6 +2094,7 @@ const struct usb_device_id wacom_ids[] = {
{ USB_DEVICE_WACOM(0xEF) },
{ USB_DEVICE_WACOM(0x47) },
{ USB_DEVICE_WACOM(0xF4) },
+ { USB_DEVICE_WACOM(0xF8) },
{ USB_DEVICE_WACOM(0xFA) },
{ USB_DEVICE_LENOVO(0x6004) },
{ }
diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index 9afc777a40a..b06a5e3a665 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -602,6 +602,7 @@ edt_ft5x06_ts_teardown_debugfs(struct edt_ft5x06_ts_data *tsdata)
{
if (tsdata->debug_dir)
debugfs_remove_recursive(tsdata->debug_dir);
+ kfree(tsdata->raw_buffer);
}
#else
@@ -843,7 +844,6 @@ static int __devexit edt_ft5x06_ts_remove(struct i2c_client *client)
if (gpio_is_valid(pdata->reset_pin))
gpio_free(pdata->reset_pin);
- kfree(tsdata->raw_buffer);
kfree(tsdata);
return 0;
diff --git a/drivers/isdn/capi/capi.c b/drivers/isdn/capi/capi.c
index 38c4bd87b2c..c679867c2cc 100644
--- a/drivers/isdn/capi/capi.c
+++ b/drivers/isdn/capi/capi.c
@@ -234,7 +234,8 @@ static struct capiminor *capiminor_alloc(struct capi20_appl *ap, u32 ncci)
mp->minor = minor;
- dev = tty_register_device(capinc_tty_driver, minor, NULL);
+ dev = tty_port_register_device(&mp->port, capinc_tty_driver, minor,
+ NULL);
if (IS_ERR(dev))
goto err_out2;
diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c
index a6d9fd2858f..67abf3ff45e 100644
--- a/drivers/isdn/gigaset/interface.c
+++ b/drivers/isdn/gigaset/interface.c
@@ -446,8 +446,8 @@ static void if_set_termios(struct tty_struct *tty, struct ktermios *old)
goto out;
}
- iflag = tty->termios->c_iflag;
- cflag = tty->termios->c_cflag;
+ iflag = tty->termios.c_iflag;
+ cflag = tty->termios.c_cflag;
old_cflag = old ? old->c_cflag : cflag;
gig_dbg(DEBUG_IF, "%u: iflag %x cflag %x old %x",
cs->minor_index, iflag, cflag, old_cflag);
@@ -524,7 +524,8 @@ void gigaset_if_init(struct cardstate *cs)
tasklet_init(&cs->if_wake_tasklet, if_wake, (unsigned long) cs);
mutex_lock(&cs->mutex);
- cs->tty_dev = tty_register_device(drv->tty, cs->minor_index, NULL);
+ cs->tty_dev = tty_port_register_device(&cs->port, drv->tty,
+ cs->minor_index, NULL);
if (!IS_ERR(cs->tty_dev))
dev_set_drvdata(cs->tty_dev, cs);
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index 7bc50670d7d..b817809f763 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -1009,15 +1009,15 @@ isdn_tty_change_speed(modem_info *info)
quot;
int i;
- if (!port->tty || !port->tty->termios)
+ if (!port->tty)
return;
- cflag = port->tty->termios->c_cflag;
+ cflag = port->tty->termios.c_cflag;
quot = i = cflag & CBAUD;
if (i & CBAUDEX) {
i &= ~CBAUDEX;
if (i < 1 || i > 2)
- port->tty->termios->c_cflag &= ~CBAUDEX;
+ port->tty->termios.c_cflag &= ~CBAUDEX;
else
i += 15;
}
@@ -1097,7 +1097,7 @@ isdn_tty_shutdown(modem_info *info)
#endif
isdn_unlock_drivers();
info->msr &= ~UART_MSR_RI;
- if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) {
+ if (!info->port.tty || (info->port.tty->termios.c_cflag & HUPCL)) {
info->mcr &= ~(UART_MCR_DTR | UART_MCR_RTS);
if (info->emu.mdmreg[REG_DTRHUP] & BIT_DTRHUP) {
isdn_tty_modem_reset_regs(info, 0);
@@ -1469,13 +1469,13 @@ isdn_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
if (!old_termios)
isdn_tty_change_speed(info);
else {
- if (tty->termios->c_cflag == old_termios->c_cflag &&
- tty->termios->c_ispeed == old_termios->c_ispeed &&
- tty->termios->c_ospeed == old_termios->c_ospeed)
+ if (tty->termios.c_cflag == old_termios->c_cflag &&
+ tty->termios.c_ispeed == old_termios->c_ispeed &&
+ tty->termios.c_ospeed == old_termios->c_ospeed)
return;
isdn_tty_change_speed(info);
if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios->c_cflag & CRTSCTS))
+ !(tty->termios.c_cflag & CRTSCTS))
tty->hw_stopped = 0;
}
}
@@ -1486,6 +1486,18 @@ isdn_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
* ------------------------------------------------------------
*/
+static int isdn_tty_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+ modem_info *info = &dev->mdm.info[tty->index];
+
+ if (isdn_tty_paranoia_check(info, tty->name, __func__))
+ return -ENODEV;
+
+ tty->driver_data = info;
+
+ return tty_port_install(&info->port, driver, tty);
+}
+
/*
* This routine is called whenever a serial port is opened. It
* enables interrupts for a serial port, linking in its async structure into
@@ -1495,22 +1507,16 @@ isdn_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
static int
isdn_tty_open(struct tty_struct *tty, struct file *filp)
{
- struct tty_port *port;
- modem_info *info;
+ modem_info *info = tty->driver_data;
+ struct tty_port *port = &info->port;
int retval;
- info = &dev->mdm.info[tty->index];
- if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_open"))
- return -ENODEV;
- port = &info->port;
#ifdef ISDN_DEBUG_MODEM_OPEN
printk(KERN_DEBUG "isdn_tty_open %s, count = %d\n", tty->name,
port->count);
#endif
port->count++;
- tty->driver_data = info;
port->tty = tty;
- tty->port = port;
/*
* Start up serial port
*/
@@ -1738,6 +1744,7 @@ modem_write_profile(atemu *m)
}
static const struct tty_operations modem_ops = {
+ .install = isdn_tty_install,
.open = isdn_tty_open,
.close = isdn_tty_close,
.write = isdn_tty_write,
@@ -1782,7 +1789,7 @@ isdn_tty_modem_init(void)
m->tty_modem->subtype = SERIAL_TYPE_NORMAL;
m->tty_modem->init_termios = tty_std_termios;
m->tty_modem->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
- m->tty_modem->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+ m->tty_modem->flags = TTY_DRIVER_REAL_RAW;
m->tty_modem->driver_name = "isdn_tty";
tty_set_operations(m->tty_modem, &modem_ops);
retval = tty_register_driver(m->tty_modem);
diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c
index 88cf9d95263..409da0f8e5c 100644
--- a/drivers/media/video/omap/omap_vout.c
+++ b/drivers/media/video/omap/omap_vout.c
@@ -44,6 +44,7 @@
#include <media/v4l2-device.h>
#include <media/v4l2-ioctl.h>
+#include <plat/cpu.h>
#include <plat/dma.h>
#include <plat/vrfb.h>
#include <video/omapdss.h>
diff --git a/drivers/media/video/omap3isp/isp.c b/drivers/media/video/omap3isp/isp.c
index 1c347633e66..43e61fe5df5 100644
--- a/drivers/media/video/omap3isp/isp.c
+++ b/drivers/media/video/omap3isp/isp.c
@@ -70,6 +70,8 @@
#include <media/v4l2-common.h>
#include <media/v4l2-device.h>
+#include <plat/cpu.h>
+
#include "isp.h"
#include "ispreg.h"
#include "ispccdc.h"
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index 1c32afed28a..f462ff226c8 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -46,6 +46,8 @@
#include <linux/i2c.h>
#include <linux/i2c/twl.h>
+#include <plat/cpu.h>
+
#include "twl-core.h"
/*
diff --git a/drivers/misc/ibmasm/uart.c b/drivers/misc/ibmasm/uart.c
index 1dcb9ae1905..01e2b0d7e59 100644
--- a/drivers/misc/ibmasm/uart.c
+++ b/drivers/misc/ibmasm/uart.c
@@ -33,7 +33,7 @@
void ibmasm_register_uart(struct service_processor *sp)
{
- struct uart_port uport;
+ struct uart_8250_port uart;
void __iomem *iomem_base;
iomem_base = sp->base_address + SCOUT_COM_B_BASE;
@@ -47,14 +47,14 @@ void ibmasm_register_uart(struct service_processor *sp)
return;
}
- memset(&uport, 0, sizeof(struct uart_port));
- uport.irq = sp->irq;
- uport.uartclk = 3686400;
- uport.flags = UPF_SHARE_IRQ;
- uport.iotype = UPIO_MEM;
- uport.membase = iomem_base;
+ memset(&uart, 0, sizeof(uart));
+ uart.port.irq = sp->irq;
+ uart.port.uartclk = 3686400;
+ uart.port.flags = UPF_SHARE_IRQ;
+ uart.port.iotype = UPIO_MEM;
+ uart.port.membase = iomem_base;
- sp->serial_line = serial8250_register_port(&uport);
+ sp->serial_line = serial8250_register_8250_port(&uart);
if (sp->serial_line < 0) {
dev_err(sp->dev, "Failed to register serial port\n");
return;
diff --git a/drivers/misc/pti.c b/drivers/misc/pti.c
index b7eb545394b..4999b34b7a6 100644
--- a/drivers/misc/pti.c
+++ b/drivers/misc/pti.c
@@ -60,7 +60,7 @@ struct pti_tty {
};
struct pti_dev {
- struct tty_port port;
+ struct tty_port port[PTITTY_MINOR_NUM];
unsigned long pti_addr;
unsigned long aperture_base;
void __iomem *pti_ioaddr;
@@ -76,7 +76,7 @@ struct pti_dev {
*/
static DEFINE_MUTEX(alloclock);
-static struct pci_device_id pci_ids[] __devinitconst = {
+static const struct pci_device_id pci_ids[] __devinitconst = {
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x82B)},
{0}
};
@@ -393,25 +393,6 @@ void pti_writedata(struct pti_masterchannel *mc, u8 *buf, int count)
}
EXPORT_SYMBOL_GPL(pti_writedata);
-/**
- * pti_pci_remove()- Driver exit method to remove PTI from
- * PCI bus.
- * @pdev: variable containing pci info of PTI.
- */
-static void __devexit pti_pci_remove(struct pci_dev *pdev)
-{
- struct pti_dev *drv_data;
-
- drv_data = pci_get_drvdata(pdev);
- if (drv_data != NULL) {
- pci_iounmap(pdev, drv_data->pti_ioaddr);
- pci_set_drvdata(pdev, NULL);
- kfree(drv_data);
- pci_release_region(pdev, 1);
- pci_disable_device(pdev);
- }
-}
-
/*
* for the tty_driver_*() basic function descriptions, see tty_driver.h.
* Specific header comments made for PTI-related specifics.
@@ -446,7 +427,7 @@ static int pti_tty_driver_open(struct tty_struct *tty, struct file *filp)
* also removes a locking requirement for the actual write
* procedure.
*/
- return tty_port_open(&drv_data->port, tty, filp);
+ return tty_port_open(tty->port, tty, filp);
}
/**
@@ -462,7 +443,7 @@ static int pti_tty_driver_open(struct tty_struct *tty, struct file *filp)
*/
static void pti_tty_driver_close(struct tty_struct *tty, struct file *filp)
{
- tty_port_close(&drv_data->port, tty, filp);
+ tty_port_close(tty->port, tty, filp);
}
/**
@@ -818,6 +799,7 @@ static const struct tty_port_operations tty_port_ops = {
static int __devinit pti_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
+ unsigned int a;
int retval = -EINVAL;
int pci_bar = 1;
@@ -830,7 +812,7 @@ static int __devinit pti_pci_probe(struct pci_dev *pdev,
__func__, __LINE__);
pr_err("%s(%d): Error value returned: %d\n",
__func__, __LINE__, retval);
- return retval;
+ goto err;
}
retval = pci_enable_device(pdev);
@@ -838,17 +820,16 @@ static int __devinit pti_pci_probe(struct pci_dev *pdev,
dev_err(&pdev->dev,
"%s: pci_enable_device() returned error %d\n",
__func__, retval);
- return retval;
+ goto err_unreg_misc;
}
drv_data = kzalloc(sizeof(*drv_data), GFP_KERNEL);
-
if (drv_data == NULL) {
retval = -ENOMEM;
dev_err(&pdev->dev,
"%s(%d): kmalloc() returned NULL memory.\n",
__func__, __LINE__);
- return retval;
+ goto err_disable_pci;
}
drv_data->pti_addr = pci_resource_start(pdev, pci_bar);
@@ -857,33 +838,65 @@ static int __devinit pti_pci_probe(struct pci_dev *pdev,
dev_err(&pdev->dev,
"%s(%d): pci_request_region() returned error %d\n",
__func__, __LINE__, retval);
- kfree(drv_data);
- return retval;
+ goto err_free_dd;
}
drv_data->aperture_base = drv_data->pti_addr+APERTURE_14;
drv_data->pti_ioaddr =
ioremap_nocache((u32)drv_data->aperture_base,
APERTURE_LEN);
if (!drv_data->pti_ioaddr) {
- pci_release_region(pdev, pci_bar);
retval = -ENOMEM;
- kfree(drv_data);
- return retval;
+ goto err_rel_reg;
}
pci_set_drvdata(pdev, drv_data);
- tty_port_init(&drv_data->port);
- drv_data->port.ops = &tty_port_ops;
+ for (a = 0; a < PTITTY_MINOR_NUM; a++) {
+ struct tty_port *port = &drv_data->port[a];
+ tty_port_init(port);
+ port->ops = &tty_port_ops;
- tty_register_device(pti_tty_driver, 0, &pdev->dev);
- tty_register_device(pti_tty_driver, 1, &pdev->dev);
+ tty_port_register_device(port, pti_tty_driver, a, &pdev->dev);
+ }
register_console(&pti_console);
+ return 0;
+err_rel_reg:
+ pci_release_region(pdev, pci_bar);
+err_free_dd:
+ kfree(drv_data);
+err_disable_pci:
+ pci_disable_device(pdev);
+err_unreg_misc:
+ misc_deregister(&pti_char_driver);
+err:
return retval;
}
+/**
+ * pti_pci_remove()- Driver exit method to remove PTI from
+ * PCI bus.
+ * @pdev: variable containing pci info of PTI.
+ */
+static void __devexit pti_pci_remove(struct pci_dev *pdev)
+{
+ struct pti_dev *drv_data = pci_get_drvdata(pdev);
+
+ unregister_console(&pti_console);
+
+ tty_unregister_device(pti_tty_driver, 0);
+ tty_unregister_device(pti_tty_driver, 1);
+
+ iounmap(drv_data->pti_ioaddr);
+ pci_set_drvdata(pdev, NULL);
+ kfree(drv_data);
+ pci_release_region(pdev, 1);
+ pci_disable_device(pdev);
+
+ misc_deregister(&pti_char_driver);
+}
+
static struct pci_driver pti_pci_driver = {
.name = PCINAME,
.id_table = pci_ids,
@@ -933,25 +946,24 @@ static int __init pti_init(void)
pr_err("%s(%d): Error value returned: %d\n",
__func__, __LINE__, retval);
- pti_tty_driver = NULL;
- return retval;
+ goto put_tty;
}
retval = pci_register_driver(&pti_pci_driver);
-
if (retval) {
pr_err("%s(%d): PCI registration failed of pti driver\n",
__func__, __LINE__);
pr_err("%s(%d): Error value returned: %d\n",
__func__, __LINE__, retval);
-
- tty_unregister_driver(pti_tty_driver);
- pr_err("%s(%d): Unregistering TTY part of pti driver\n",
- __func__, __LINE__);
- pti_tty_driver = NULL;
- return retval;
+ goto unreg_tty;
}
+ return 0;
+unreg_tty:
+ tty_unregister_driver(pti_tty_driver);
+put_tty:
+ put_tty_driver(pti_tty_driver);
+ pti_tty_driver = NULL;
return retval;
}
@@ -960,31 +972,9 @@ static int __init pti_init(void)
*/
static void __exit pti_exit(void)
{
- int retval;
-
- tty_unregister_device(pti_tty_driver, 0);
- tty_unregister_device(pti_tty_driver, 1);
-
- retval = tty_unregister_driver(pti_tty_driver);
- if (retval) {
- pr_err("%s(%d): TTY unregistration failed of pti driver\n",
- __func__, __LINE__);
- pr_err("%s(%d): Error value returned: %d\n",
- __func__, __LINE__, retval);
- }
-
+ tty_unregister_driver(pti_tty_driver);
pci_unregister_driver(&pti_pci_driver);
-
- retval = misc_deregister(&pti_char_driver);
- if (retval) {
- pr_err("%s(%d): CHAR unregistration failed of pti driver\n",
- __func__, __LINE__);
- pr_err("%s(%d): Error value returned: %d\n",
- __func__, __LINE__, retval);
- }
-
- unregister_console(&pti_console);
- return;
+ put_tty_driver(pti_tty_driver);
}
module_init(pti_init);
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index f1c84decb19..172a768036d 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -1411,7 +1411,8 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
/* complete ongoing async transfer before issuing discard */
if (card->host->areq)
mmc_blk_issue_rw_rq(mq, NULL);
- if (req->cmd_flags & REQ_SECURE)
+ if (req->cmd_flags & REQ_SECURE &&
+ !(card->quirks & MMC_QUIRK_SEC_ERASE_TRIM_BROKEN))
ret = mmc_blk_issue_secdiscard_rq(mq, req);
else
ret = mmc_blk_issue_discard_rq(mq, req);
@@ -1716,6 +1717,7 @@ force_ro_fail:
#define CID_MANFID_SANDISK 0x2
#define CID_MANFID_TOSHIBA 0x11
#define CID_MANFID_MICRON 0x13
+#define CID_MANFID_SAMSUNG 0x15
static const struct mmc_fixup blk_fixups[] =
{
@@ -1752,6 +1754,28 @@ static const struct mmc_fixup blk_fixups[] =
MMC_FIXUP(CID_NAME_ANY, CID_MANFID_MICRON, 0x200, add_quirk_mmc,
MMC_QUIRK_LONG_READ_TIME),
+ /*
+ * On these Samsung MoviNAND parts, performing secure erase or
+ * secure trim can result in unrecoverable corruption due to a
+ * firmware bug.
+ */
+ MMC_FIXUP("M8G2FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+ MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+ MMC_FIXUP("MAG4FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+ MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+ MMC_FIXUP("MBG8FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+ MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+ MMC_FIXUP("MCGAFA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+ MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+ MMC_FIXUP("VAL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+ MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+ MMC_FIXUP("VYL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+ MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+ MMC_FIXUP("KYL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+ MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+ MMC_FIXUP("VZL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+ MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+
END_FIXUP
};
diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c
index 5a2cbfac66d..d2339ea3781 100644
--- a/drivers/mmc/card/sdio_uart.c
+++ b/drivers/mmc/card/sdio_uart.c
@@ -518,7 +518,7 @@ static void sdio_uart_check_modem_status(struct sdio_uart_port *port)
if (status & UART_MSR_DCTS) {
port->icount.cts++;
tty = tty_port_tty_get(&port->port);
- if (tty && (tty->termios->c_cflag & CRTSCTS)) {
+ if (tty && (tty->termios.c_cflag & CRTSCTS)) {
int cts = (status & UART_MSR_CTS);
if (tty->hw_stopped) {
if (cts) {
@@ -671,12 +671,12 @@ static int sdio_uart_activate(struct tty_port *tport, struct tty_struct *tty)
port->ier = UART_IER_RLSI|UART_IER_RDI|UART_IER_RTOIE|UART_IER_UUE;
port->mctrl = TIOCM_OUT2;
- sdio_uart_change_speed(port, tty->termios, NULL);
+ sdio_uart_change_speed(port, &tty->termios, NULL);
- if (tty->termios->c_cflag & CBAUD)
+ if (tty->termios.c_cflag & CBAUD)
sdio_uart_set_mctrl(port, TIOCM_RTS | TIOCM_DTR);
- if (tty->termios->c_cflag & CRTSCTS)
+ if (tty->termios.c_cflag & CRTSCTS)
if (!(sdio_uart_get_mctrl(port) & TIOCM_CTS))
tty->hw_stopped = 1;
@@ -850,7 +850,7 @@ static void sdio_uart_throttle(struct tty_struct *tty)
{
struct sdio_uart_port *port = tty->driver_data;
- if (!I_IXOFF(tty) && !(tty->termios->c_cflag & CRTSCTS))
+ if (!I_IXOFF(tty) && !(tty->termios.c_cflag & CRTSCTS))
return;
if (sdio_uart_claim_func(port) != 0)
@@ -861,7 +861,7 @@ static void sdio_uart_throttle(struct tty_struct *tty)
sdio_uart_start_tx(port);
}
- if (tty->termios->c_cflag & CRTSCTS)
+ if (tty->termios.c_cflag & CRTSCTS)
sdio_uart_clear_mctrl(port, TIOCM_RTS);
sdio_uart_irq(port->func);
@@ -872,7 +872,7 @@ static void sdio_uart_unthrottle(struct tty_struct *tty)
{
struct sdio_uart_port *port = tty->driver_data;
- if (!I_IXOFF(tty) && !(tty->termios->c_cflag & CRTSCTS))
+ if (!I_IXOFF(tty) && !(tty->termios.c_cflag & CRTSCTS))
return;
if (sdio_uart_claim_func(port) != 0)
@@ -887,7 +887,7 @@ static void sdio_uart_unthrottle(struct tty_struct *tty)
}
}
- if (tty->termios->c_cflag & CRTSCTS)
+ if (tty->termios.c_cflag & CRTSCTS)
sdio_uart_set_mctrl(port, TIOCM_RTS);
sdio_uart_irq(port->func);
@@ -898,12 +898,12 @@ static void sdio_uart_set_termios(struct tty_struct *tty,
struct ktermios *old_termios)
{
struct sdio_uart_port *port = tty->driver_data;
- unsigned int cflag = tty->termios->c_cflag;
+ unsigned int cflag = tty->termios.c_cflag;
if (sdio_uart_claim_func(port) != 0)
return;
- sdio_uart_change_speed(port, tty->termios, old_termios);
+ sdio_uart_change_speed(port, &tty->termios, old_termios);
/* Handle transition to B0 status */
if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD))
@@ -1132,8 +1132,8 @@ static int sdio_uart_probe(struct sdio_func *func,
kfree(port);
} else {
struct device *dev;
- dev = tty_register_device(sdio_uart_tty_driver,
- port->index, &func->dev);
+ dev = tty_port_register_device(&port->port,
+ sdio_uart_tty_driver, port->index, &func->dev);
if (IS_ERR(dev)) {
sdio_uart_port_remove(port);
ret = PTR_ERR(dev);
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 322412cec4e..a53c7c478e0 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -81,6 +81,7 @@ struct atmel_mci_caps {
bool has_bad_data_ordering;
bool need_reset_after_xfer;
bool need_blksz_mul_4;
+ bool need_notbusy_for_read_ops;
};
struct atmel_mci_dma {
@@ -1625,7 +1626,8 @@ static void atmci_tasklet_func(unsigned long priv)
__func__);
atmci_set_completed(host, EVENT_XFER_COMPLETE);
- if (host->data->flags & MMC_DATA_WRITE) {
+ if (host->caps.need_notbusy_for_read_ops ||
+ (host->data->flags & MMC_DATA_WRITE)) {
atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
state = STATE_WAITING_NOTBUSY;
} else if (host->mrq->stop) {
@@ -2218,6 +2220,7 @@ static void __init atmci_get_cap(struct atmel_mci *host)
host->caps.has_bad_data_ordering = 1;
host->caps.need_reset_after_xfer = 1;
host->caps.need_blksz_mul_4 = 1;
+ host->caps.need_notbusy_for_read_ops = 0;
/* keep only major version number */
switch (version & 0xf00) {
@@ -2238,6 +2241,7 @@ static void __init atmci_get_cap(struct atmel_mci *host)
case 0x200:
host->caps.has_rwproof = 1;
host->caps.need_blksz_mul_4 = 0;
+ host->caps.need_notbusy_for_read_ops = 1;
case 0x100:
host->caps.has_bad_data_ordering = 0;
host->caps.need_reset_after_xfer = 0;
diff --git a/drivers/mmc/host/bfin_sdh.c b/drivers/mmc/host/bfin_sdh.c
index 03666174ca4..a17dd7363ce 100644
--- a/drivers/mmc/host/bfin_sdh.c
+++ b/drivers/mmc/host/bfin_sdh.c
@@ -49,13 +49,6 @@
#define bfin_write_SDH_CFG bfin_write_RSI_CFG
#endif
-struct dma_desc_array {
- unsigned long start_addr;
- unsigned short cfg;
- unsigned short x_count;
- short x_modify;
-} __packed;
-
struct sdh_host {
struct mmc_host *mmc;
spinlock_t lock;
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 72dc3cde646..af40d227bec 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -627,6 +627,7 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot)
{
struct dw_mci *host = slot->host;
u32 div;
+ u32 clk_en_a;
if (slot->clock != host->current_speed) {
div = host->bus_hz / slot->clock;
@@ -659,9 +660,11 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot)
mci_send_cmd(slot,
SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT, 0);
- /* enable clock */
- mci_writel(host, CLKENA, ((SDMMC_CLKEN_ENABLE |
- SDMMC_CLKEN_LOW_PWR) << slot->id));
+ /* enable clock; only low power if no SDIO */
+ clk_en_a = SDMMC_CLKEN_ENABLE << slot->id;
+ if (!(mci_readl(host, INTMASK) & SDMMC_INT_SDIO(slot->id)))
+ clk_en_a |= SDMMC_CLKEN_LOW_PWR << slot->id;
+ mci_writel(host, CLKENA, clk_en_a);
/* inform CIU */
mci_send_cmd(slot,
@@ -862,6 +865,30 @@ static int dw_mci_get_cd(struct mmc_host *mmc)
return present;
}
+/*
+ * Disable lower power mode.
+ *
+ * Low power mode will stop the card clock when idle. According to the
+ * description of the CLKENA register we should disable low power mode
+ * for SDIO cards if we need SDIO interrupts to work.
+ *
+ * This function is fast if low power mode is already disabled.
+ */
+static void dw_mci_disable_low_power(struct dw_mci_slot *slot)
+{
+ struct dw_mci *host = slot->host;
+ u32 clk_en_a;
+ const u32 clken_low_pwr = SDMMC_CLKEN_LOW_PWR << slot->id;
+
+ clk_en_a = mci_readl(host, CLKENA);
+
+ if (clk_en_a & clken_low_pwr) {
+ mci_writel(host, CLKENA, clk_en_a & ~clken_low_pwr);
+ mci_send_cmd(slot, SDMMC_CMD_UPD_CLK |
+ SDMMC_CMD_PRV_DAT_WAIT, 0);
+ }
+}
+
static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb)
{
struct dw_mci_slot *slot = mmc_priv(mmc);
@@ -871,6 +898,14 @@ static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb)
/* Enable/disable Slot Specific SDIO interrupt */
int_mask = mci_readl(host, INTMASK);
if (enb) {
+ /*
+ * Turn off low power mode if it was enabled. This is a bit of
+ * a heavy operation and we disable / enable IRQs a lot, so
+ * we'll leave low power mode disabled and it will get
+ * re-enabled again in dw_mci_setup_bus().
+ */
+ dw_mci_disable_low_power(slot);
+
mci_writel(host, INTMASK,
(int_mask | SDMMC_INT_SDIO(slot->id)));
} else {
@@ -1429,22 +1464,10 @@ static void dw_mci_read_data_pio(struct dw_mci *host)
nbytes += len;
remain -= len;
} while (remain);
- sg_miter->consumed = offset;
+ sg_miter->consumed = offset;
status = mci_readl(host, MINTSTS);
mci_writel(host, RINTSTS, SDMMC_INT_RXDR);
- if (status & DW_MCI_DATA_ERROR_FLAGS) {
- host->data_status = status;
- data->bytes_xfered += nbytes;
- sg_miter_stop(sg_miter);
- host->sg = NULL;
- smp_wmb();
-
- set_bit(EVENT_DATA_ERROR, &host->pending_events);
-
- tasklet_schedule(&host->tasklet);
- return;
- }
} while (status & SDMMC_INT_RXDR); /*if the RXDR is ready read again*/
data->bytes_xfered += nbytes;
@@ -1497,23 +1520,10 @@ static void dw_mci_write_data_pio(struct dw_mci *host)
nbytes += len;
remain -= len;
} while (remain);
- sg_miter->consumed = offset;
+ sg_miter->consumed = offset;
status = mci_readl(host, MINTSTS);
mci_writel(host, RINTSTS, SDMMC_INT_TXDR);
- if (status & DW_MCI_DATA_ERROR_FLAGS) {
- host->data_status = status;
- data->bytes_xfered += nbytes;
- sg_miter_stop(sg_miter);
- host->sg = NULL;
-
- smp_wmb();
-
- set_bit(EVENT_DATA_ERROR, &host->pending_events);
-
- tasklet_schedule(&host->tasklet);
- return;
- }
} while (status & SDMMC_INT_TXDR); /* if TXDR write again */
data->bytes_xfered += nbytes;
@@ -1547,12 +1557,11 @@ static void dw_mci_cmd_interrupt(struct dw_mci *host, u32 status)
static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
{
struct dw_mci *host = dev_id;
- u32 status, pending;
+ u32 pending;
unsigned int pass_count = 0;
int i;
do {
- status = mci_readl(host, RINTSTS);
pending = mci_readl(host, MINTSTS); /* read-only mask reg */
/*
@@ -1570,7 +1579,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
if (pending & DW_MCI_CMD_ERROR_FLAGS) {
mci_writel(host, RINTSTS, DW_MCI_CMD_ERROR_FLAGS);
- host->cmd_status = status;
+ host->cmd_status = pending;
smp_wmb();
set_bit(EVENT_CMD_COMPLETE, &host->pending_events);
}
@@ -1578,18 +1587,16 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
if (pending & DW_MCI_DATA_ERROR_FLAGS) {
/* if there is an error report DATA_ERROR */
mci_writel(host, RINTSTS, DW_MCI_DATA_ERROR_FLAGS);
- host->data_status = status;
+ host->data_status = pending;
smp_wmb();
set_bit(EVENT_DATA_ERROR, &host->pending_events);
- if (!(pending & (SDMMC_INT_DTO | SDMMC_INT_DCRC |
- SDMMC_INT_SBE | SDMMC_INT_EBE)))
- tasklet_schedule(&host->tasklet);
+ tasklet_schedule(&host->tasklet);
}
if (pending & SDMMC_INT_DATA_OVER) {
mci_writel(host, RINTSTS, SDMMC_INT_DATA_OVER);
if (!host->data_status)
- host->data_status = status;
+ host->data_status = pending;
smp_wmb();
if (host->dir_status == DW_MCI_RECV_STATUS) {
if (host->sg != NULL)
@@ -1613,7 +1620,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
if (pending & SDMMC_INT_CMD_DONE) {
mci_writel(host, RINTSTS, SDMMC_INT_CMD_DONE);
- dw_mci_cmd_interrupt(host, status);
+ dw_mci_cmd_interrupt(host, pending);
}
if (pending & SDMMC_INT_CD) {
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index a51f9309ffb..ad3fcea1269 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -285,11 +285,11 @@ static irqreturn_t mxs_mmc_irq_handler(int irq, void *dev_id)
writel(stat & MXS_MMC_IRQ_BITS,
host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_CLR);
+ spin_unlock(&host->lock);
+
if ((stat & BM_SSP_CTRL1_SDIO_IRQ) && (stat & BM_SSP_CTRL1_SDIO_IRQ_EN))
mmc_signal_sdio_irq(host->mmc);
- spin_unlock(&host->lock);
-
if (stat & BM_SSP_CTRL1_RESP_TIMEOUT_IRQ)
cmd->error = -ETIMEDOUT;
else if (stat & BM_SSP_CTRL1_RESP_ERR_IRQ)
@@ -644,11 +644,6 @@ static void mxs_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
host->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
writel(BM_SSP_CTRL1_SDIO_IRQ_EN,
host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_SET);
-
- if (readl(host->base + HW_SSP_STATUS(host)) &
- BM_SSP_STATUS_SDIO_IRQ)
- mmc_signal_sdio_irq(host->mmc);
-
} else {
writel(BM_SSP_CTRL0_SDIO_IRQ_CHECK,
host->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
@@ -657,6 +652,11 @@ static void mxs_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
}
spin_unlock_irqrestore(&host->lock, flags);
+
+ if (enable && readl(host->base + HW_SSP_STATUS(host)) &
+ BM_SSP_STATUS_SDIO_IRQ)
+ mmc_signal_sdio_irq(host->mmc);
+
}
static const struct mmc_host_ops mxs_mmc_ops = {
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 50e08f03aa6..87c0293a1ee 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -33,7 +33,6 @@
#include <asm/io.h>
#include <asm/irq.h>
-#include <plat/board.h>
#include <plat/mmc.h>
#include <asm/gpio.h>
#include <plat/dma.h>
@@ -668,7 +667,7 @@ mmc_omap_clk_timer(unsigned long data)
static void
mmc_omap_xfer_data(struct mmc_omap_host *host, int write)
{
- int n;
+ int n, nwords;
if (host->buffer_bytes_left == 0) {
host->sg_idx++;
@@ -678,15 +677,23 @@ mmc_omap_xfer_data(struct mmc_omap_host *host, int write)
n = 64;
if (n > host->buffer_bytes_left)
n = host->buffer_bytes_left;
+
+ nwords = n / 2;
+ nwords += n & 1; /* handle odd number of bytes to transfer */
+
host->buffer_bytes_left -= n;
host->total_bytes_left -= n;
host->data->bytes_xfered += n;
if (write) {
- __raw_writesw(host->virt_base + OMAP_MMC_REG(host, DATA), host->buffer, n);
+ __raw_writesw(host->virt_base + OMAP_MMC_REG(host, DATA),
+ host->buffer, nwords);
} else {
- __raw_readsw(host->virt_base + OMAP_MMC_REG(host, DATA), host->buffer, n);
+ __raw_readsw(host->virt_base + OMAP_MMC_REG(host, DATA),
+ host->buffer, nwords);
}
+
+ host->buffer += nwords;
}
static inline void mmc_omap_report_irq(u16 status)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 3a09f93cc3b..f871b31ece5 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -40,7 +40,6 @@
#include <linux/regulator/consumer.h>
#include <linux/pm_runtime.h>
#include <mach/hardware.h>
-#include <plat/board.h>
#include <plat/mmc.h>
#include <plat/cpu.h>
diff --git a/drivers/mmc/host/sdhci-esdhc.h b/drivers/mmc/host/sdhci-esdhc.h
index b97b2f5dafd..d25f9ab9a54 100644
--- a/drivers/mmc/host/sdhci-esdhc.h
+++ b/drivers/mmc/host/sdhci-esdhc.h
@@ -48,14 +48,14 @@ static inline void esdhc_set_clock(struct sdhci_host *host, unsigned int clock)
int div = 1;
u32 temp;
+ if (clock == 0)
+ goto out;
+
temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
temp &= ~(ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN
| ESDHC_CLOCK_MASK);
sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
- if (clock == 0)
- goto out;
-
while (host->max_clk / pre_div / 16 > clock && pre_div < 256)
pre_div *= 2;
diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
index 861ca8f7e47..78a524b4935 100644
--- a/drivers/mtd/nand/ams-delta.c
+++ b/drivers/mtd/nand/ams-delta.c
@@ -23,12 +23,16 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
+
#include <asm/io.h>
-#include <mach/hardware.h>
#include <asm/sizes.h>
-#include <linux/gpio.h>
+
#include <plat/board-ams-delta.h>
+#include <mach/hardware.h>
+
/*
* MTD structure for E3 (Delta)
*/
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index ac4fd756eda..27293e32851 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -101,6 +101,16 @@
#define P4e_s(a) (TF(a & NAND_Ecc_P4e) << 0)
#define P4o_s(a) (TF(a & NAND_Ecc_P4o) << 1)
+#define PREFETCH_CONFIG1_CS_SHIFT 24
+#define ECC_CONFIG_CS_SHIFT 1
+#define CS_MASK 0x7
+#define ENABLE_PREFETCH (0x1 << 7)
+#define DMA_MPU_MODE_SHIFT 2
+#define ECCSIZE1_SHIFT 22
+#define ECC1RESULTSIZE 0x1
+#define ECCCLEAR 0x100
+#define ECC1 0x1
+
/* oob info generated runtime depending on ecc algorithm and layout selected */
static struct nand_ecclayout omap_oobinfo;
/* Define some generic bad / good block scan pattern which are used
@@ -124,15 +134,18 @@ struct omap_nand_info {
int gpmc_cs;
unsigned long phys_base;
+ unsigned long mem_size;
struct completion comp;
struct dma_chan *dma;
- int gpmc_irq;
+ int gpmc_irq_fifo;
+ int gpmc_irq_count;
enum {
OMAP_NAND_IO_READ = 0, /* read */
OMAP_NAND_IO_WRITE, /* write */
} iomode;
u_char *buf;
int buf_len;
+ struct gpmc_nand_regs reg;
#ifdef CONFIG_MTD_NAND_OMAP_BCH
struct bch_control *bch;
@@ -141,6 +154,63 @@ struct omap_nand_info {
};
/**
+ * omap_prefetch_enable - configures and starts prefetch transfer
+ * @cs: cs (chip select) number
+ * @fifo_th: fifo threshold to be used for read/ write
+ * @dma_mode: dma mode enable (1) or disable (0)
+ * @u32_count: number of bytes to be transferred
+ * @is_write: prefetch read(0) or write post(1) mode
+ */
+static int omap_prefetch_enable(int cs, int fifo_th, int dma_mode,
+ unsigned int u32_count, int is_write, struct omap_nand_info *info)
+{
+ u32 val;
+
+ if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX)
+ return -1;
+
+ if (readl(info->reg.gpmc_prefetch_control))
+ return -EBUSY;
+
+ /* Set the amount of bytes to be prefetched */
+ writel(u32_count, info->reg.gpmc_prefetch_config2);
+
+ /* Set dma/mpu mode, the prefetch read / post write and
+ * enable the engine. Set which cs is has requested for.
+ */
+ val = ((cs << PREFETCH_CONFIG1_CS_SHIFT) |
+ PREFETCH_FIFOTHRESHOLD(fifo_th) | ENABLE_PREFETCH |
+ (dma_mode << DMA_MPU_MODE_SHIFT) | (0x1 & is_write));
+ writel(val, info->reg.gpmc_prefetch_config1);
+
+ /* Start the prefetch engine */
+ writel(0x1, info->reg.gpmc_prefetch_control);
+
+ return 0;
+}
+
+/**
+ * omap_prefetch_reset - disables and stops the prefetch engine
+ */
+static int omap_prefetch_reset(int cs, struct omap_nand_info *info)
+{
+ u32 config1;
+
+ /* check if the same module/cs is trying to reset */
+ config1 = readl(info->reg.gpmc_prefetch_config1);
+ if (((config1 >> PREFETCH_CONFIG1_CS_SHIFT) & CS_MASK) != cs)
+ return -EINVAL;
+
+ /* Stop the PFPW engine */
+ writel(0x0, info->reg.gpmc_prefetch_control);
+
+ /* Reset/disable the PFPW engine */
+ writel(0x0, info->reg.gpmc_prefetch_config1);
+
+ return 0;
+}
+
+/**
* omap_hwcontrol - hardware specific access to control-lines
* @mtd: MTD device structure
* @cmd: command to device
@@ -158,13 +228,13 @@ static void omap_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
if (cmd != NAND_CMD_NONE) {
if (ctrl & NAND_CLE)
- gpmc_nand_write(info->gpmc_cs, GPMC_NAND_COMMAND, cmd);
+ writeb(cmd, info->reg.gpmc_nand_command);
else if (ctrl & NAND_ALE)
- gpmc_nand_write(info->gpmc_cs, GPMC_NAND_ADDRESS, cmd);
+ writeb(cmd, info->reg.gpmc_nand_address);
else /* NAND_NCE */
- gpmc_nand_write(info->gpmc_cs, GPMC_NAND_DATA, cmd);
+ writeb(cmd, info->reg.gpmc_nand_data);
}
}
@@ -198,7 +268,8 @@ static void omap_write_buf8(struct mtd_info *mtd, const u_char *buf, int len)
iowrite8(*p++, info->nand.IO_ADDR_W);
/* wait until buffer is available for write */
do {
- status = gpmc_read_status(GPMC_STATUS_BUFFER);
+ status = readl(info->reg.gpmc_status) &
+ GPMC_STATUS_BUFF_EMPTY;
} while (!status);
}
}
@@ -235,7 +306,8 @@ static void omap_write_buf16(struct mtd_info *mtd, const u_char * buf, int len)
iowrite16(*p++, info->nand.IO_ADDR_W);
/* wait until buffer is available for write */
do {
- status = gpmc_read_status(GPMC_STATUS_BUFFER);
+ status = readl(info->reg.gpmc_status) &
+ GPMC_STATUS_BUFF_EMPTY;
} while (!status);
}
}
@@ -265,8 +337,8 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
}
/* configure and start prefetch transfer */
- ret = gpmc_prefetch_enable(info->gpmc_cs,
- PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x0);
+ ret = omap_prefetch_enable(info->gpmc_cs,
+ PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x0, info);
if (ret) {
/* PFPW engine is busy, use cpu copy method */
if (info->nand.options & NAND_BUSWIDTH_16)
@@ -275,14 +347,15 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
omap_read_buf8(mtd, (u_char *)p, len);
} else {
do {
- r_count = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT);
+ r_count = readl(info->reg.gpmc_prefetch_status);
+ r_count = GPMC_PREFETCH_STATUS_FIFO_CNT(r_count);
r_count = r_count >> 2;
ioread32_rep(info->nand.IO_ADDR_R, p, r_count);
p += r_count;
len -= r_count << 2;
} while (len);
/* disable and stop the PFPW engine */
- gpmc_prefetch_reset(info->gpmc_cs);
+ omap_prefetch_reset(info->gpmc_cs, info);
}
}
@@ -301,6 +374,7 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
int i = 0, ret = 0;
u16 *p = (u16 *)buf;
unsigned long tim, limit;
+ u32 val;
/* take care of subpage writes */
if (len % 2 != 0) {
@@ -310,8 +384,8 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
}
/* configure and start prefetch transfer */
- ret = gpmc_prefetch_enable(info->gpmc_cs,
- PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x1);
+ ret = omap_prefetch_enable(info->gpmc_cs,
+ PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x1, info);
if (ret) {
/* PFPW engine is busy, use cpu copy method */
if (info->nand.options & NAND_BUSWIDTH_16)
@@ -320,7 +394,8 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
omap_write_buf8(mtd, (u_char *)p, len);
} else {
while (len) {
- w_count = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT);
+ w_count = readl(info->reg.gpmc_prefetch_status);
+ w_count = GPMC_PREFETCH_STATUS_FIFO_CNT(w_count);
w_count = w_count >> 1;
for (i = 0; (i < w_count) && len; i++, len -= 2)
iowrite16(*p++, info->nand.IO_ADDR_W);
@@ -329,11 +404,14 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
tim = 0;
limit = (loops_per_jiffy *
msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
- while (gpmc_read_status(GPMC_PREFETCH_COUNT) && (tim++ < limit))
+ do {
cpu_relax();
+ val = readl(info->reg.gpmc_prefetch_status);
+ val = GPMC_PREFETCH_STATUS_COUNT(val);
+ } while (val && (tim++ < limit));
/* disable and stop the PFPW engine */
- gpmc_prefetch_reset(info->gpmc_cs);
+ omap_prefetch_reset(info->gpmc_cs, info);
}
}
@@ -365,6 +443,7 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
unsigned long tim, limit;
unsigned n;
int ret;
+ u32 val;
if (addr >= high_memory) {
struct page *p1;
@@ -396,9 +475,9 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
tx->callback_param = &info->comp;
dmaengine_submit(tx);
- /* configure and start prefetch transfer */
- ret = gpmc_prefetch_enable(info->gpmc_cs,
- PREFETCH_FIFOTHRESHOLD_MAX, 0x1, len, is_write);
+ /* configure and start prefetch transfer */
+ ret = omap_prefetch_enable(info->gpmc_cs,
+ PREFETCH_FIFOTHRESHOLD_MAX, 0x1, len, is_write, info);
if (ret)
/* PFPW engine is busy, use cpu copy method */
goto out_copy_unmap;
@@ -410,11 +489,15 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
wait_for_completion(&info->comp);
tim = 0;
limit = (loops_per_jiffy * msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
- while (gpmc_read_status(GPMC_PREFETCH_COUNT) && (tim++ < limit))
+
+ do {
cpu_relax();
+ val = readl(info->reg.gpmc_prefetch_status);
+ val = GPMC_PREFETCH_STATUS_COUNT(val);
+ } while (val && (tim++ < limit));
/* disable and stop the PFPW engine */
- gpmc_prefetch_reset(info->gpmc_cs);
+ omap_prefetch_reset(info->gpmc_cs, info);
dma_unmap_sg(info->dma->device->dev, &sg, 1, dir);
return 0;
@@ -471,13 +554,12 @@ static irqreturn_t omap_nand_irq(int this_irq, void *dev)
{
struct omap_nand_info *info = (struct omap_nand_info *) dev;
u32 bytes;
- u32 irq_stat;
- irq_stat = gpmc_read_status(GPMC_GET_IRQ_STATUS);
- bytes = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT);
+ bytes = readl(info->reg.gpmc_prefetch_status);
+ bytes = GPMC_PREFETCH_STATUS_FIFO_CNT(bytes);
bytes = bytes & 0xFFFC; /* io in multiple of 4 bytes */
if (info->iomode == OMAP_NAND_IO_WRITE) { /* checks for write io */
- if (irq_stat & 0x2)
+ if (this_irq == info->gpmc_irq_count)
goto done;
if (info->buf_len && (info->buf_len < bytes))
@@ -494,20 +576,17 @@ static irqreturn_t omap_nand_irq(int this_irq, void *dev)
(u32 *)info->buf, bytes >> 2);
info->buf = info->buf + bytes;
- if (irq_stat & 0x2)
+ if (this_irq == info->gpmc_irq_count)
goto done;
}
- gpmc_cs_configure(info->gpmc_cs, GPMC_SET_IRQ_STATUS, irq_stat);
return IRQ_HANDLED;
done:
complete(&info->comp);
- /* disable irq */
- gpmc_cs_configure(info->gpmc_cs, GPMC_ENABLE_IRQ, 0);
- /* clear status */
- gpmc_cs_configure(info->gpmc_cs, GPMC_SET_IRQ_STATUS, irq_stat);
+ disable_irq_nosync(info->gpmc_irq_fifo);
+ disable_irq_nosync(info->gpmc_irq_count);
return IRQ_HANDLED;
}
@@ -534,22 +613,22 @@ static void omap_read_buf_irq_pref(struct mtd_info *mtd, u_char *buf, int len)
init_completion(&info->comp);
/* configure and start prefetch transfer */
- ret = gpmc_prefetch_enable(info->gpmc_cs,
- PREFETCH_FIFOTHRESHOLD_MAX/2, 0x0, len, 0x0);
+ ret = omap_prefetch_enable(info->gpmc_cs,
+ PREFETCH_FIFOTHRESHOLD_MAX/2, 0x0, len, 0x0, info);
if (ret)
/* PFPW engine is busy, use cpu copy method */
goto out_copy;
info->buf_len = len;
- /* enable irq */
- gpmc_cs_configure(info->gpmc_cs, GPMC_ENABLE_IRQ,
- (GPMC_IRQ_FIFOEVENTENABLE | GPMC_IRQ_COUNT_EVENT));
+
+ enable_irq(info->gpmc_irq_count);
+ enable_irq(info->gpmc_irq_fifo);
/* waiting for read to complete */
wait_for_completion(&info->comp);
/* disable and stop the PFPW engine */
- gpmc_prefetch_reset(info->gpmc_cs);
+ omap_prefetch_reset(info->gpmc_cs, info);
return;
out_copy:
@@ -572,6 +651,7 @@ static void omap_write_buf_irq_pref(struct mtd_info *mtd,
struct omap_nand_info, mtd);
int ret = 0;
unsigned long tim, limit;
+ u32 val;
if (len <= mtd->oobsize) {
omap_write_buf_pref(mtd, buf, len);
@@ -583,27 +663,31 @@ static void omap_write_buf_irq_pref(struct mtd_info *mtd,
init_completion(&info->comp);
/* configure and start prefetch transfer : size=24 */
- ret = gpmc_prefetch_enable(info->gpmc_cs,
- (PREFETCH_FIFOTHRESHOLD_MAX * 3) / 8, 0x0, len, 0x1);
+ ret = omap_prefetch_enable(info->gpmc_cs,
+ (PREFETCH_FIFOTHRESHOLD_MAX * 3) / 8, 0x0, len, 0x1, info);
if (ret)
/* PFPW engine is busy, use cpu copy method */
goto out_copy;
info->buf_len = len;
- /* enable irq */
- gpmc_cs_configure(info->gpmc_cs, GPMC_ENABLE_IRQ,
- (GPMC_IRQ_FIFOEVENTENABLE | GPMC_IRQ_COUNT_EVENT));
+
+ enable_irq(info->gpmc_irq_count);
+ enable_irq(info->gpmc_irq_fifo);
/* waiting for write to complete */
wait_for_completion(&info->comp);
+
/* wait for data to flushed-out before reset the prefetch */
tim = 0;
limit = (loops_per_jiffy * msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
- while (gpmc_read_status(GPMC_PREFETCH_COUNT) && (tim++ < limit))
+ do {
+ val = readl(info->reg.gpmc_prefetch_status);
+ val = GPMC_PREFETCH_STATUS_COUNT(val);
cpu_relax();
+ } while (val && (tim++ < limit));
/* disable and stop the PFPW engine */
- gpmc_prefetch_reset(info->gpmc_cs);
+ omap_prefetch_reset(info->gpmc_cs, info);
return;
out_copy:
@@ -843,7 +927,20 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
{
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd);
- return gpmc_calculate_ecc(info->gpmc_cs, dat, ecc_code);
+ u32 val;
+
+ val = readl(info->reg.gpmc_ecc_config);
+ if (((val >> ECC_CONFIG_CS_SHIFT) & ~CS_MASK) != info->gpmc_cs)
+ return -EINVAL;
+
+ /* read ecc result */
+ val = readl(info->reg.gpmc_ecc1_result);
+ *ecc_code++ = val; /* P128e, ..., P1e */
+ *ecc_code++ = val >> 16; /* P128o, ..., P1o */
+ /* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */
+ *ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0);
+
+ return 0;
}
/**
@@ -857,8 +954,34 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int mode)
mtd);
struct nand_chip *chip = mtd->priv;
unsigned int dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0;
+ u32 val;
+
+ /* clear ecc and enable bits */
+ val = ECCCLEAR | ECC1;
+ writel(val, info->reg.gpmc_ecc_control);
+
+ /* program ecc and result sizes */
+ val = ((((info->nand.ecc.size >> 1) - 1) << ECCSIZE1_SHIFT) |
+ ECC1RESULTSIZE);
+ writel(val, info->reg.gpmc_ecc_size_config);
- gpmc_enable_hwecc(info->gpmc_cs, mode, dev_width, info->nand.ecc.size);
+ switch (mode) {
+ case NAND_ECC_READ:
+ case NAND_ECC_WRITE:
+ writel(ECCCLEAR | ECC1, info->reg.gpmc_ecc_control);
+ break;
+ case NAND_ECC_READSYN:
+ writel(ECCCLEAR, info->reg.gpmc_ecc_control);
+ break;
+ default:
+ dev_info(&info->pdev->dev,
+ "error: unrecognized Mode[%d]!\n", mode);
+ break;
+ }
+
+ /* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */
+ val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1);
+ writel(val, info->reg.gpmc_ecc_config);
}
/**
@@ -886,10 +1009,9 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip)
else
timeo += (HZ * 20) / 1000;
- gpmc_nand_write(info->gpmc_cs,
- GPMC_NAND_COMMAND, (NAND_CMD_STATUS & 0xFF));
+ writeb(NAND_CMD_STATUS & 0xFF, info->reg.gpmc_nand_command);
while (time_before(jiffies, timeo)) {
- status = gpmc_nand_read(info->gpmc_cs, GPMC_NAND_DATA);
+ status = readb(info->reg.gpmc_nand_data);
if (status & NAND_STATUS_READY)
break;
cond_resched();
@@ -909,22 +1031,13 @@ static int omap_dev_ready(struct mtd_info *mtd)
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd);
- val = gpmc_read_status(GPMC_GET_IRQ_STATUS);
+ val = readl(info->reg.gpmc_status);
+
if ((val & 0x100) == 0x100) {
- /* Clear IRQ Interrupt */
- val |= 0x100;
- val &= ~(0x0);
- gpmc_cs_configure(info->gpmc_cs, GPMC_SET_IRQ_STATUS, val);
+ return 1;
} else {
- unsigned int cnt = 0;
- while (cnt++ < 0x1FF) {
- if ((val & 0x100) == 0x100)
- return 0;
- val = gpmc_read_status(GPMC_GET_IRQ_STATUS);
- }
+ return 0;
}
-
- return 1;
}
#ifdef CONFIG_MTD_NAND_OMAP_BCH
@@ -1155,6 +1268,7 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
int i, offset;
dma_cap_mask_t mask;
unsigned sig;
+ struct resource *res;
pdata = pdev->dev.platform_data;
if (pdata == NULL) {
@@ -1174,7 +1288,7 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
info->pdev = pdev;
info->gpmc_cs = pdata->cs;
- info->phys_base = pdata->phys_base;
+ info->reg = pdata->reg;
info->mtd.priv = &info->nand;
info->mtd.name = dev_name(&pdev->dev);
@@ -1183,16 +1297,23 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
info->nand.options = pdata->devsize;
info->nand.options |= NAND_SKIP_BBTSCAN;
- /* NAND write protect off */
- gpmc_cs_configure(info->gpmc_cs, GPMC_CONFIG_WP, 0);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ err = -EINVAL;
+ dev_err(&pdev->dev, "error getting memory resource\n");
+ goto out_free_info;
+ }
+
+ info->phys_base = res->start;
+ info->mem_size = resource_size(res);
- if (!request_mem_region(info->phys_base, NAND_IO_SIZE,
+ if (!request_mem_region(info->phys_base, info->mem_size,
pdev->dev.driver->name)) {
err = -EBUSY;
goto out_free_info;
}
- info->nand.IO_ADDR_R = ioremap(info->phys_base, NAND_IO_SIZE);
+ info->nand.IO_ADDR_R = ioremap(info->phys_base, info->mem_size);
if (!info->nand.IO_ADDR_R) {
err = -ENOMEM;
goto out_release_mem_region;
@@ -1265,17 +1386,39 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
break;
case NAND_OMAP_PREFETCH_IRQ:
- err = request_irq(pdata->gpmc_irq,
- omap_nand_irq, IRQF_SHARED, "gpmc-nand", info);
+ info->gpmc_irq_fifo = platform_get_irq(pdev, 0);
+ if (info->gpmc_irq_fifo <= 0) {
+ dev_err(&pdev->dev, "error getting fifo irq\n");
+ err = -ENODEV;
+ goto out_release_mem_region;
+ }
+ err = request_irq(info->gpmc_irq_fifo, omap_nand_irq,
+ IRQF_SHARED, "gpmc-nand-fifo", info);
if (err) {
dev_err(&pdev->dev, "requesting irq(%d) error:%d",
- pdata->gpmc_irq, err);
+ info->gpmc_irq_fifo, err);
+ info->gpmc_irq_fifo = 0;
+ goto out_release_mem_region;
+ }
+
+ info->gpmc_irq_count = platform_get_irq(pdev, 1);
+ if (info->gpmc_irq_count <= 0) {
+ dev_err(&pdev->dev, "error getting count irq\n");
+ err = -ENODEV;
+ goto out_release_mem_region;
+ }
+ err = request_irq(info->gpmc_irq_count, omap_nand_irq,
+ IRQF_SHARED, "gpmc-nand-count", info);
+ if (err) {
+ dev_err(&pdev->dev, "requesting irq(%d) error:%d",
+ info->gpmc_irq_count, err);
+ info->gpmc_irq_count = 0;
goto out_release_mem_region;
- } else {
- info->gpmc_irq = pdata->gpmc_irq;
- info->nand.read_buf = omap_read_buf_irq_pref;
- info->nand.write_buf = omap_write_buf_irq_pref;
}
+
+ info->nand.read_buf = omap_read_buf_irq_pref;
+ info->nand.write_buf = omap_write_buf_irq_pref;
+
break;
default:
@@ -1363,7 +1506,11 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
out_release_mem_region:
if (info->dma)
dma_release_channel(info->dma);
- release_mem_region(info->phys_base, NAND_IO_SIZE);
+ if (info->gpmc_irq_count > 0)
+ free_irq(info->gpmc_irq_count, info);
+ if (info->gpmc_irq_fifo > 0)
+ free_irq(info->gpmc_irq_fifo, info);
+ release_mem_region(info->phys_base, info->mem_size);
out_free_info:
kfree(info);
@@ -1381,8 +1528,10 @@ static int omap_nand_remove(struct platform_device *pdev)
if (info->dma)
dma_release_channel(info->dma);
- if (info->gpmc_irq)
- free_irq(info->gpmc_irq, info);
+ if (info->gpmc_irq_count > 0)
+ free_irq(info->gpmc_irq_count, info);
+ if (info->gpmc_irq_fifo > 0)
+ free_irq(info->gpmc_irq_fifo, info);
/* Release NAND device, its internal structures and partitions */
nand_release(&info->mtd);
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index 398a8278384..9d49b1f4ff5 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -43,18 +43,17 @@
#include <asm/gpio.h>
#include <plat/dma.h>
-
-#include <plat/board.h>
+#include <plat/cpu.h>
#define DRIVER_NAME "omap2-onenand"
-#define ONENAND_IO_SIZE SZ_128K
#define ONENAND_BUFRAM_SIZE (1024 * 5)
struct omap2_onenand {
struct platform_device *pdev;
int gpmc_cs;
unsigned long phys_base;
+ unsigned int mem_size;
int gpio_irq;
struct mtd_info mtd;
struct onenand_chip onenand;
@@ -626,6 +625,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
struct omap2_onenand *c;
struct onenand_chip *this;
int r;
+ struct resource *res;
pdata = pdev->dev.platform_data;
if (pdata == NULL) {
@@ -647,20 +647,24 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
c->gpio_irq = 0;
}
- r = gpmc_cs_request(c->gpmc_cs, ONENAND_IO_SIZE, &c->phys_base);
- if (r < 0) {
- dev_err(&pdev->dev, "Cannot request GPMC CS\n");
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ r = -EINVAL;
+ dev_err(&pdev->dev, "error getting memory resource\n");
goto err_kfree;
}
- if (request_mem_region(c->phys_base, ONENAND_IO_SIZE,
+ c->phys_base = res->start;
+ c->mem_size = resource_size(res);
+
+ if (request_mem_region(c->phys_base, c->mem_size,
pdev->dev.driver->name) == NULL) {
- dev_err(&pdev->dev, "Cannot reserve memory region at 0x%08lx, "
- "size: 0x%x\n", c->phys_base, ONENAND_IO_SIZE);
+ dev_err(&pdev->dev, "Cannot reserve memory region at 0x%08lx, size: 0x%x\n",
+ c->phys_base, c->mem_size);
r = -EBUSY;
- goto err_free_cs;
+ goto err_kfree;
}
- c->onenand.base = ioremap(c->phys_base, ONENAND_IO_SIZE);
+ c->onenand.base = ioremap(c->phys_base, c->mem_size);
if (c->onenand.base == NULL) {
r = -ENOMEM;
goto err_release_mem_region;
@@ -776,9 +780,7 @@ err_release_gpio:
err_iounmap:
iounmap(c->onenand.base);
err_release_mem_region:
- release_mem_region(c->phys_base, ONENAND_IO_SIZE);
-err_free_cs:
- gpmc_cs_free(c->gpmc_cs);
+ release_mem_region(c->phys_base, c->mem_size);
err_kfree:
kfree(c);
@@ -800,7 +802,7 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev)
gpio_free(c->gpio_irq);
}
iounmap(c->onenand.base);
- release_mem_region(c->phys_base, ONENAND_IO_SIZE);
+ release_mem_region(c->phys_base, c->mem_size);
gpmc_cs_free(c->gpmc_cs);
kfree(c);
diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c
index 437bc193e17..568307cc7ca 100644
--- a/drivers/mtd/ubi/vtbl.c
+++ b/drivers/mtd/ubi/vtbl.c
@@ -340,7 +340,7 @@ retry:
* of this LEB as it will be deleted and freed in 'ubi_add_to_av()'.
*/
err = ubi_add_to_av(ubi, ai, new_aeb->pnum, new_aeb->ec, vid_hdr, 0);
- kfree(new_aeb);
+ kmem_cache_free(ai->aeb_slab_cache, new_aeb);
ubi_free_vid_hdr(ubi, vid_hdr);
return err;
@@ -353,7 +353,7 @@ write_error:
list_add(&new_aeb->u.list, &ai->erase);
goto retry;
}
- kfree(new_aeb);
+ kmem_cache_free(ai->aeb_slab_cache, new_aeb);
out_free:
ubi_free_vid_hdr(ubi, vid_hdr);
return err;
diff --git a/drivers/net/can/sja1000/sja1000_platform.c b/drivers/net/can/sja1000/sja1000_platform.c
index 4f50145f648..662c5f7eb0c 100644
--- a/drivers/net/can/sja1000/sja1000_platform.c
+++ b/drivers/net/can/sja1000/sja1000_platform.c
@@ -109,7 +109,9 @@ static int sp_probe(struct platform_device *pdev)
priv = netdev_priv(dev);
dev->irq = res_irq->start;
- priv->irq_flags = res_irq->flags & (IRQF_TRIGGER_MASK | IRQF_SHARED);
+ priv->irq_flags = res_irq->flags & IRQF_TRIGGER_MASK;
+ if (res_irq->flags & IORESOURCE_IRQ_SHAREABLE)
+ priv->irq_flags |= IRQF_SHARED;
priv->reg_base = addr;
/* The CAN clock frequency is half the oscillator clock frequency */
priv->can.clock.freq = pdata->osc_freq / 2;
diff --git a/drivers/net/can/softing/softing_fw.c b/drivers/net/can/softing/softing_fw.c
index 31059617567..b595d3422b9 100644
--- a/drivers/net/can/softing/softing_fw.c
+++ b/drivers/net/can/softing/softing_fw.c
@@ -150,7 +150,7 @@ int softing_load_fw(const char *file, struct softing *card,
const uint8_t *mem, *end, *dat;
uint16_t type, len;
uint32_t addr;
- uint8_t *buf = NULL;
+ uint8_t *buf = NULL, *new_buf;
int buflen = 0;
int8_t type_end = 0;
@@ -199,11 +199,12 @@ int softing_load_fw(const char *file, struct softing *card,
if (len > buflen) {
/* align buflen */
buflen = (len + (1024-1)) & ~(1024-1);
- buf = krealloc(buf, buflen, GFP_KERNEL);
- if (!buf) {
+ new_buf = krealloc(buf, buflen, GFP_KERNEL);
+ if (!new_buf) {
ret = -ENOMEM;
goto failed;
}
+ buf = new_buf;
}
/* verify record data */
memcpy_fromio(buf, &dpram[addr + offset], len);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index 463b9ec57d8..6d1a24acb77 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -1708,9 +1708,6 @@ struct bnx2x_func_init_params {
continue; \
else
-#define for_each_napi_rx_queue(bp, var) \
- for ((var) = 0; (var) < bp->num_napi_queues; (var)++)
-
/* Skip OOO FP */
#define for_each_tx_queue(bp, var) \
for ((var) = 0; (var) < BNX2X_NUM_QUEUES(bp); (var)++) \
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index e879e19eb0d..af20c6ee2cd 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -2046,6 +2046,8 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
*/
bnx2x_setup_tc(bp->dev, bp->max_cos);
+ /* Add all NAPI objects */
+ bnx2x_add_all_napi(bp);
bnx2x_napi_enable(bp);
/* set pf load just before approaching the MCP */
@@ -2408,6 +2410,8 @@ int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
/* Disable HW interrupts, NAPI */
bnx2x_netif_stop(bp, 1);
+ /* Delete all NAPI objects */
+ bnx2x_del_all_napi(bp);
/* Release IRQs */
bnx2x_free_irq(bp);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
index dfa757e7429..21b553229ea 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
@@ -792,7 +792,7 @@ static inline void bnx2x_add_all_napi(struct bnx2x *bp)
bp->num_napi_queues = bp->num_queues;
/* Add NAPI objects */
- for_each_napi_rx_queue(bp, i)
+ for_each_rx_queue(bp, i)
netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi),
bnx2x_poll, BNX2X_NAPI_WEIGHT);
}
@@ -801,7 +801,7 @@ static inline void bnx2x_del_all_napi(struct bnx2x *bp)
{
int i;
- for_each_napi_rx_queue(bp, i)
+ for_each_rx_queue(bp, i)
netif_napi_del(&bnx2x_fp(bp, i, napi));
}
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
index fc4e0e3885b..c37a68d6809 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
@@ -2888,11 +2888,9 @@ static void bnx2x_get_channels(struct net_device *dev,
*/
static void bnx2x_change_num_queues(struct bnx2x *bp, int num_rss)
{
- bnx2x_del_all_napi(bp);
bnx2x_disable_msi(bp);
BNX2X_NUM_QUEUES(bp) = num_rss + NON_ETH_CONTEXT_USE;
bnx2x_set_int_mode(bp);
- bnx2x_add_all_napi(bp);
}
/**
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 02b5a343b19..21054987257 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -8427,6 +8427,8 @@ unload_error:
/* Disable HW interrupts, NAPI */
bnx2x_netif_stop(bp, 1);
+ /* Delete all NAPI objects */
+ bnx2x_del_all_napi(bp);
/* Release IRQs */
bnx2x_free_irq(bp);
@@ -11229,10 +11231,12 @@ static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
static void poll_bnx2x(struct net_device *dev)
{
struct bnx2x *bp = netdev_priv(dev);
+ int i;
- disable_irq(bp->pdev->irq);
- bnx2x_interrupt(bp->pdev->irq, dev);
- enable_irq(bp->pdev->irq);
+ for_each_eth_queue(bp, i) {
+ struct bnx2x_fastpath *fp = &bp->fp[i];
+ napi_schedule(&bnx2x_fp(bp, fp->index, napi));
+ }
}
#endif
@@ -11899,9 +11903,6 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
*/
bnx2x_set_int_mode(bp);
- /* Add all NAPI objects */
- bnx2x_add_all_napi(bp);
-
rc = register_netdev(dev);
if (rc) {
dev_err(&pdev->dev, "Cannot register net device\n");
@@ -11976,9 +11977,6 @@ static void __devexit bnx2x_remove_one(struct pci_dev *pdev)
unregister_netdev(dev);
- /* Delete all NAPI objects */
- bnx2x_del_all_napi(bp);
-
/* Power on: we can't let PCI layer write to us while we are in D3 */
bnx2x_set_power_state(bp, PCI_D0);
@@ -12025,6 +12023,8 @@ static int bnx2x_eeh_nic_unload(struct bnx2x *bp)
bnx2x_tx_disable(bp);
bnx2x_netif_stop(bp, 0);
+ /* Delete all NAPI objects */
+ bnx2x_del_all_napi(bp);
del_timer_sync(&bp->timer);
diff --git a/drivers/net/ethernet/cirrus/cs89x0.c b/drivers/net/ethernet/cirrus/cs89x0.c
index 845b2020f29..13844695778 100644
--- a/drivers/net/ethernet/cirrus/cs89x0.c
+++ b/drivers/net/ethernet/cirrus/cs89x0.c
@@ -1243,6 +1243,7 @@ static void set_multicast_list(struct net_device *dev)
{
struct net_local *lp = netdev_priv(dev);
unsigned long flags;
+ u16 cfg;
spin_lock_irqsave(&lp->lock, flags);
if (dev->flags & IFF_PROMISC)
@@ -1260,11 +1261,10 @@ static void set_multicast_list(struct net_device *dev)
/* in promiscuous mode, we accept errored packets,
* so we have to enable interrupts on them also
*/
- writereg(dev, PP_RxCFG,
- (lp->curr_rx_cfg |
- (lp->rx_mode == RX_ALL_ACCEPT)
- ? (RX_CRC_ERROR_ENBL | RX_RUNT_ENBL | RX_EXTRA_DATA_ENBL)
- : 0));
+ cfg = lp->curr_rx_cfg;
+ if (lp->rx_mode == RX_ALL_ACCEPT)
+ cfg |= RX_CRC_ERROR_ENBL | RX_RUNT_ENBL | RX_EXTRA_DATA_ENBL;
+ writereg(dev, PP_RxCFG, cfg);
spin_unlock_irqrestore(&lp->lock, flags);
}
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index 7fac97b4bb5..8c63d06ab12 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -259,7 +259,7 @@ int be_process_mcc(struct be_adapter *adapter)
int num = 0, status = 0;
struct be_mcc_obj *mcc_obj = &adapter->mcc_obj;
- spin_lock_bh(&adapter->mcc_cq_lock);
+ spin_lock(&adapter->mcc_cq_lock);
while ((compl = be_mcc_compl_get(adapter))) {
if (compl->flags & CQE_FLAGS_ASYNC_MASK) {
/* Interpret flags as an async trailer */
@@ -280,7 +280,7 @@ int be_process_mcc(struct be_adapter *adapter)
if (num)
be_cq_notify(adapter, mcc_obj->cq.id, mcc_obj->rearm_cq, num);
- spin_unlock_bh(&adapter->mcc_cq_lock);
+ spin_unlock(&adapter->mcc_cq_lock);
return status;
}
@@ -295,7 +295,9 @@ static int be_mcc_wait_compl(struct be_adapter *adapter)
if (be_error(adapter))
return -EIO;
+ local_bh_disable();
status = be_process_mcc(adapter);
+ local_bh_enable();
if (atomic_read(&mcc_obj->q.used) == 0)
break;
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 90a903d83d8..78b8aa8069f 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -3763,7 +3763,9 @@ static void be_worker(struct work_struct *work)
/* when interrupts are not yet enabled, just reap any pending
* mcc completions */
if (!netif_running(adapter->netdev)) {
+ local_bh_disable();
be_process_mcc(adapter);
+ local_bh_enable();
goto reschedule;
}
diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 4605f724668..d3233f59a82 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -1041,7 +1041,7 @@ static int gfar_probe(struct platform_device *ofdev)
if (priv->device_flags & FSL_GIANFAR_DEV_HAS_VLAN) {
dev->hw_features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
- dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+ dev->features |= NETIF_F_HW_VLAN_RX;
}
if (priv->device_flags & FSL_GIANFAR_DEV_HAS_EXTENDED_HASH) {
diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
index cd153326c3c..cb3356c9af8 100644
--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -310,6 +310,7 @@ struct e1000_adapter {
*/
struct e1000_ring *tx_ring /* One per active queue */
____cacheline_aligned_in_smp;
+ u32 tx_fifo_limit;
struct napi_struct napi;
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 46c3b1f9ff8..d01a099475a 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -3517,6 +3517,15 @@ void e1000e_reset(struct e1000_adapter *adapter)
}
/*
+ * Alignment of Tx data is on an arbitrary byte boundary with the
+ * maximum size per Tx descriptor limited only to the transmit
+ * allocation of the packet buffer minus 96 bytes with an upper
+ * limit of 24KB due to receive synchronization limitations.
+ */
+ adapter->tx_fifo_limit = min_t(u32, ((er32(PBA) >> 16) << 10) - 96,
+ 24 << 10);
+
+ /*
* Disable Adaptive Interrupt Moderation if 2 full packets cannot
* fit in receive buffer.
*/
@@ -4785,12 +4794,9 @@ static bool e1000_tx_csum(struct e1000_ring *tx_ring, struct sk_buff *skb)
return 1;
}
-#define E1000_MAX_PER_TXD 8192
-#define E1000_MAX_TXD_PWR 12
-
static int e1000_tx_map(struct e1000_ring *tx_ring, struct sk_buff *skb,
unsigned int first, unsigned int max_per_txd,
- unsigned int nr_frags, unsigned int mss)
+ unsigned int nr_frags)
{
struct e1000_adapter *adapter = tx_ring->adapter;
struct pci_dev *pdev = adapter->pdev;
@@ -5023,20 +5029,19 @@ static int __e1000_maybe_stop_tx(struct e1000_ring *tx_ring, int size)
static int e1000_maybe_stop_tx(struct e1000_ring *tx_ring, int size)
{
+ BUG_ON(size > tx_ring->count);
+
if (e1000_desc_unused(tx_ring) >= size)
return 0;
return __e1000_maybe_stop_tx(tx_ring, size);
}
-#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1)
static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
struct net_device *netdev)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_ring *tx_ring = adapter->tx_ring;
unsigned int first;
- unsigned int max_per_txd = E1000_MAX_PER_TXD;
- unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
unsigned int tx_flags = 0;
unsigned int len = skb_headlen(skb);
unsigned int nr_frags;
@@ -5056,18 +5061,8 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
}
mss = skb_shinfo(skb)->gso_size;
- /*
- * The controller does a simple calculation to
- * make sure there is enough room in the FIFO before
- * initiating the DMA for each buffer. The calc is:
- * 4 = ceil(buffer len/mss). To make sure we don't
- * overrun the FIFO, adjust the max buffer len if mss
- * drops.
- */
if (mss) {
u8 hdr_len;
- max_per_txd = min(mss << 2, max_per_txd);
- max_txd_pwr = fls(max_per_txd) - 1;
/*
* TSO Workaround for 82571/2/3 Controllers -- if skb->data
@@ -5097,12 +5092,12 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
count++;
count++;
- count += TXD_USE_COUNT(len, max_txd_pwr);
+ count += DIV_ROUND_UP(len, adapter->tx_fifo_limit);
nr_frags = skb_shinfo(skb)->nr_frags;
for (f = 0; f < nr_frags; f++)
- count += TXD_USE_COUNT(skb_frag_size(&skb_shinfo(skb)->frags[f]),
- max_txd_pwr);
+ count += DIV_ROUND_UP(skb_frag_size(&skb_shinfo(skb)->frags[f]),
+ adapter->tx_fifo_limit);
if (adapter->hw.mac.tx_pkt_filtering)
e1000_transfer_dhcp_info(adapter, skb);
@@ -5144,15 +5139,18 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
tx_flags |= E1000_TX_FLAGS_NO_FCS;
/* if count is 0 then mapping error has occurred */
- count = e1000_tx_map(tx_ring, skb, first, max_per_txd, nr_frags, mss);
+ count = e1000_tx_map(tx_ring, skb, first, adapter->tx_fifo_limit,
+ nr_frags);
if (count) {
skb_tx_timestamp(skb);
netdev_sent_queue(netdev, skb->len);
e1000_tx_queue(tx_ring, tx_flags, count);
/* Make sure there is space in the ring for the next send. */
- e1000_maybe_stop_tx(tx_ring, MAX_SKB_FRAGS + 2);
-
+ e1000_maybe_stop_tx(tx_ring,
+ (MAX_SKB_FRAGS *
+ DIV_ROUND_UP(PAGE_SIZE,
+ adapter->tx_fifo_limit) + 2));
} else {
dev_kfree_skb_any(skb);
tx_ring->buffer_info[first].time_stamp = 0;
@@ -6327,8 +6325,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
adapter->hw.phy.autoneg_advertised = 0x2f;
/* ring size defaults */
- adapter->rx_ring->count = 256;
- adapter->tx_ring->count = 256;
+ adapter->rx_ring->count = E1000_DEFAULT_RXD;
+ adapter->tx_ring->count = E1000_DEFAULT_TXD;
/*
* Initial Wake on LAN setting - If APM wake is enabled in
diff --git a/drivers/net/ethernet/sfc/ethtool.c b/drivers/net/ethernet/sfc/ethtool.c
index 8cba2df82b1..5faedd855b7 100644
--- a/drivers/net/ethernet/sfc/ethtool.c
+++ b/drivers/net/ethernet/sfc/ethtool.c
@@ -863,8 +863,8 @@ static int efx_ethtool_get_class_rule(struct efx_nic *efx,
&ip_entry->ip4dst, &ip_entry->pdst);
if (rc != 0) {
rc = efx_filter_get_ipv4_full(
- &spec, &proto, &ip_entry->ip4src, &ip_entry->psrc,
- &ip_entry->ip4dst, &ip_entry->pdst);
+ &spec, &proto, &ip_entry->ip4dst, &ip_entry->pdst,
+ &ip_entry->ip4src, &ip_entry->psrc);
EFX_WARN_ON_PARANOID(rc);
ip_mask->ip4src = ~0;
ip_mask->psrc = ~0;
diff --git a/drivers/net/ethernet/sgi/ioc3-eth.c b/drivers/net/ethernet/sgi/ioc3-eth.c
index b5ba3084c7f..3e5519a0acc 100644
--- a/drivers/net/ethernet/sgi/ioc3-eth.c
+++ b/drivers/net/ethernet/sgi/ioc3-eth.c
@@ -1147,15 +1147,17 @@ static void __devinit ioc3_8250_register(struct ioc3_uartregs __iomem *uart)
{
#define COSMISC_CONSTANT 6
- struct uart_port port = {
- .irq = 0,
- .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
- .iotype = UPIO_MEM,
- .regshift = 0,
- .uartclk = (22000000 << 1) / COSMISC_CONSTANT,
-
- .membase = (unsigned char __iomem *) uart,
- .mapbase = (unsigned long) uart,
+ struct uart_8250_port port = {
+ .port = {
+ .irq = 0,
+ .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 0,
+ .uartclk = (22000000 << 1) / COSMISC_CONSTANT,
+
+ .membase = (unsigned char __iomem *) uart,
+ .mapbase = (unsigned long) uart,
+ }
};
unsigned char lcr;
@@ -1164,7 +1166,7 @@ static void __devinit ioc3_8250_register(struct ioc3_uartregs __iomem *uart)
uart->iu_scr = COSMISC_CONSTANT,
uart->iu_lcr = lcr;
uart->iu_lcr;
- serial8250_register_port(&port);
+ serial8250_register_8250_port(&port);
}
static void __devinit ioc3_serial_probe(struct pci_dev *pdev, struct ioc3 *ioc3)
diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index e2d083228f3..719be3912aa 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -22,6 +22,9 @@
Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
*******************************************************************************/
+#ifndef __COMMON_H__
+#define __COMMON_H__
+
#include <linux/etherdevice.h>
#include <linux/netdevice.h>
#include <linux/phy.h>
@@ -366,3 +369,5 @@ extern void stmmac_set_mac(void __iomem *ioaddr, bool enable);
extern void dwmac_dma_flush_tx_fifo(void __iomem *ioaddr);
extern const struct stmmac_ring_mode_ops ring_mode_ops;
+
+#endif /* __COMMON_H__ */
diff --git a/drivers/net/ethernet/stmicro/stmmac/descs.h b/drivers/net/ethernet/stmicro/stmmac/descs.h
index 9820ec842cc..223adf95fd0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/descs.h
+++ b/drivers/net/ethernet/stmicro/stmmac/descs.h
@@ -20,6 +20,10 @@
Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
*******************************************************************************/
+
+#ifndef __DESCS_H__
+#define __DESCS_H__
+
struct dma_desc {
/* Receive descriptor */
union {
@@ -166,3 +170,5 @@ enum tdes_csum_insertion {
* is not calculated */
cic_full = 3, /* IP header and pseudoheader */
};
+
+#endif /* __DESCS_H__ */
diff --git a/drivers/net/ethernet/stmicro/stmmac/descs_com.h b/drivers/net/ethernet/stmicro/stmmac/descs_com.h
index dd8d6e19dff..7ee9499a6e3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/descs_com.h
+++ b/drivers/net/ethernet/stmicro/stmmac/descs_com.h
@@ -27,6 +27,9 @@
Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
*******************************************************************************/
+#ifndef __DESC_COM_H__
+#define __DESC_COM_H__
+
#if defined(CONFIG_STMMAC_RING)
static inline void ehn_desc_rx_set_on_ring_chain(struct dma_desc *p, int end)
{
@@ -124,3 +127,5 @@ static inline void norm_set_tx_desc_len(struct dma_desc *p, int len)
p->des01.tx.buffer1_size = len;
}
#endif
+
+#endif /* __DESC_COM_H__ */
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100.h b/drivers/net/ethernet/stmicro/stmmac/dwmac100.h
index 7c6d857a9cc..2ec6aeae349 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac100.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100.h
@@ -22,6 +22,9 @@
Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
*******************************************************************************/
+#ifndef __DWMAC100_H__
+#define __DWMAC100_H__
+
#include <linux/phy.h>
#include "common.h"
@@ -119,3 +122,5 @@ enum ttc_control {
#define DMA_MISSED_FRAME_M_CNTR 0x0000ffff /* Missed Frame Couinter */
extern const struct stmmac_dma_ops dwmac100_dma_ops;
+
+#endif /* __DWMAC100_H__ */
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
index f90fcb5f957..0e4cacedc1f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
@@ -19,6 +19,8 @@
Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
*******************************************************************************/
+#ifndef __DWMAC1000_H__
+#define __DWMAC1000_H__
#include <linux/phy.h>
#include "common.h"
@@ -229,6 +231,7 @@ enum rtc_control {
#define GMAC_MMC_RX_CSUM_OFFLOAD 0x208
/* Synopsys Core versions */
-#define DWMAC_CORE_3_40 34
+#define DWMAC_CORE_3_40 0x34
extern const struct stmmac_dma_ops dwmac1000_dma_ops;
+#endif /* __DWMAC1000_H__ */
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
index e678ce39d01..e49c9a0fd6f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
@@ -22,6 +22,9 @@
Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
*******************************************************************************/
+#ifndef __DWMAC_DMA_H__
+#define __DWMAC_DMA_H__
+
/* DMA CRS Control and Status Register Mapping */
#define DMA_BUS_MODE 0x00001000 /* Bus Mode */
#define DMA_XMT_POLL_DEMAND 0x00001004 /* Transmit Poll Demand */
@@ -109,3 +112,5 @@ extern void dwmac_dma_start_rx(void __iomem *ioaddr);
extern void dwmac_dma_stop_rx(void __iomem *ioaddr);
extern int dwmac_dma_interrupt(void __iomem *ioaddr,
struct stmmac_extra_stats *x);
+
+#endif /* __DWMAC_DMA_H__ */
diff --git a/drivers/net/ethernet/stmicro/stmmac/mmc.h b/drivers/net/ethernet/stmicro/stmmac/mmc.h
index a38352024cb..67995ef2525 100644
--- a/drivers/net/ethernet/stmicro/stmmac/mmc.h
+++ b/drivers/net/ethernet/stmicro/stmmac/mmc.h
@@ -22,6 +22,9 @@
Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
*******************************************************************************/
+#ifndef __MMC_H__
+#define __MMC_H__
+
/* MMC control register */
/* When set, all counter are reset */
#define MMC_CNTRL_COUNTER_RESET 0x1
@@ -129,3 +132,5 @@ struct stmmac_counters {
extern void dwmac_mmc_ctrl(void __iomem *ioaddr, unsigned int mode);
extern void dwmac_mmc_intr_all_mask(void __iomem *ioaddr);
extern void dwmac_mmc_read(void __iomem *ioaddr, struct stmmac_counters *mmc);
+
+#endif /* __MMC_H__ */
diff --git a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c
index c07cfe989f6..0c74a702d46 100644
--- a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c
@@ -33,7 +33,7 @@
#define MMC_TX_INTR 0x00000108 /* MMC TX Interrupt */
#define MMC_RX_INTR_MASK 0x0000010c /* MMC Interrupt Mask */
#define MMC_TX_INTR_MASK 0x00000110 /* MMC Interrupt Mask */
-#define MMC_DEFAUL_MASK 0xffffffff
+#define MMC_DEFAULT_MASK 0xffffffff
/* MMC TX counter registers */
@@ -147,8 +147,8 @@ void dwmac_mmc_ctrl(void __iomem *ioaddr, unsigned int mode)
/* To mask all all interrupts.*/
void dwmac_mmc_intr_all_mask(void __iomem *ioaddr)
{
- writel(MMC_DEFAUL_MASK, ioaddr + MMC_RX_INTR_MASK);
- writel(MMC_DEFAUL_MASK, ioaddr + MMC_TX_INTR_MASK);
+ writel(MMC_DEFAULT_MASK, ioaddr + MMC_RX_INTR_MASK);
+ writel(MMC_DEFAULT_MASK, ioaddr + MMC_TX_INTR_MASK);
}
/* This reads the MAC core counters (if actaully supported).
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index f2d3665430a..e872e1da313 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -20,6 +20,9 @@
Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
*******************************************************************************/
+#ifndef __STMMAC_H__
+#define __STMMAC_H__
+
#define STMMAC_RESOURCE_NAME "stmmaceth"
#define DRV_MODULE_VERSION "March_2012"
@@ -166,3 +169,5 @@ static inline void stmmac_unregister_pci(void)
{
}
#endif /* CONFIG_STMMAC_PCI */
+
+#endif /* __STMMAC_H__ */
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h
index 6863590d184..aea9b14cdfb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h
@@ -21,6 +21,8 @@
Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
*******************************************************************************/
+#ifndef __STMMAC_TIMER_H__
+#define __STMMAC_TIMER_H__
struct stmmac_timer {
void (*timer_start) (unsigned int new_freq);
@@ -40,3 +42,5 @@ void stmmac_schedule(struct net_device *dev);
extern int tmu2_register_user(void *fnt, void *data);
extern void tmu2_unregister_user(void);
#endif
+
+#endif /* __STMMAC_TIMER_H__ */
diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c
index cd7ee204e94..a9ca4a03d31 100644
--- a/drivers/net/ethernet/ti/davinci_mdio.c
+++ b/drivers/net/ethernet/ti/davinci_mdio.c
@@ -394,8 +394,10 @@ static int __devexit davinci_mdio_remove(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct davinci_mdio_data *data = dev_get_drvdata(dev);
- if (data->bus)
+ if (data->bus) {
+ mdiobus_unregister(data->bus);
mdiobus_free(data->bus);
+ }
if (data->clk)
clk_put(data->clk);
diff --git a/drivers/net/fddi/skfp/pmf.c b/drivers/net/fddi/skfp/pmf.c
index 24d8566cfd8..441b4dc7945 100644
--- a/drivers/net/fddi/skfp/pmf.c
+++ b/drivers/net/fddi/skfp/pmf.c
@@ -673,7 +673,7 @@ void smt_add_para(struct s_smc *smc, struct s_pcon *pcon, u_short para,
sm_pm_get_ls(smc,port_to_mib(smc,port))) ;
break ;
case SMT_P_REASON :
- * (u_long *) to = 0 ;
+ *(u32 *)to = 0 ;
sp_len = 4 ;
goto sp_done ;
case SMT_P1033 : /* time stamp */
diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c
index 3352b2443e5..30087ca23a0 100644
--- a/drivers/net/irda/irtty-sir.c
+++ b/drivers/net/irda/irtty-sir.c
@@ -124,8 +124,8 @@ static int irtty_change_speed(struct sir_dev *dev, unsigned speed)
tty = priv->tty;
mutex_lock(&tty->termios_mutex);
- old_termios = *(tty->termios);
- cflag = tty->termios->c_cflag;
+ old_termios = tty->termios;
+ cflag = tty->termios.c_cflag;
tty_encode_baud_rate(tty, speed, speed);
if (tty->ops->set_termios)
tty->ops->set_termios(tty, &old_termios);
@@ -281,15 +281,15 @@ static inline void irtty_stop_receiver(struct tty_struct *tty, int stop)
int cflag;
mutex_lock(&tty->termios_mutex);
- old_termios = *(tty->termios);
- cflag = tty->termios->c_cflag;
+ old_termios = tty->termios;
+ cflag = tty->termios.c_cflag;
if (stop)
cflag &= ~CREAD;
else
cflag |= CREAD;
- tty->termios->c_cflag = cflag;
+ tty->termios.c_cflag = cflag;
if (tty->ops->set_termios)
tty->ops->set_termios(tty, &old_termios);
mutex_unlock(&tty->termios_mutex);
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 62f30b46fa4..605a4baa9b7 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -1107,7 +1107,6 @@ static void _hso_serial_set_termios(struct tty_struct *tty,
struct ktermios *old)
{
struct hso_serial *serial = tty->driver_data;
- struct ktermios *termios;
if (!serial) {
printk(KERN_ERR "%s: no tty structures", __func__);
@@ -1119,16 +1118,15 @@ static void _hso_serial_set_termios(struct tty_struct *tty,
/*
* Fix up unsupported bits
*/
- termios = tty->termios;
- termios->c_iflag &= ~IXON; /* disable enable XON/XOFF flow control */
+ tty->termios.c_iflag &= ~IXON; /* disable enable XON/XOFF flow control */
- termios->c_cflag &=
+ tty->termios.c_cflag &=
~(CSIZE /* no size */
| PARENB /* disable parity bit */
| CBAUD /* clear current baud rate */
| CBAUDEX); /* clear current buad rate */
- termios->c_cflag |= CS8; /* character size 8 bits */
+ tty->termios.c_cflag |= CS8; /* character size 8 bits */
/* baud rate 115200 */
tty_encode_baud_rate(tty, 115200, 115200);
@@ -1425,14 +1423,14 @@ static void hso_serial_set_termios(struct tty_struct *tty, struct ktermios *old)
if (old)
D5("Termios called with: cflags new[%d] - old[%d]",
- tty->termios->c_cflag, old->c_cflag);
+ tty->termios.c_cflag, old->c_cflag);
/* the actual setup */
spin_lock_irqsave(&serial->serial_lock, flags);
if (serial->port.count)
_hso_serial_set_termios(tty, old);
else
- tty->termios = old;
+ tty->termios = *old;
spin_unlock_irqrestore(&serial->serial_lock, flags);
/* done */
@@ -2289,9 +2287,11 @@ static int hso_serial_common_create(struct hso_serial *serial, int num_urbs,
if (minor < 0)
goto exit;
+ tty_port_init(&serial->port);
+
/* register our minor number */
- serial->parent->dev = tty_register_device(tty_drv, minor,
- &serial->parent->interface->dev);
+ serial->parent->dev = tty_port_register_device(&serial->port, tty_drv,
+ minor, &serial->parent->interface->dev);
dev = serial->parent->dev;
dev_set_drvdata(dev, serial->parent);
i = device_create_file(dev, &dev_attr_hsotype);
@@ -2300,7 +2300,6 @@ static int hso_serial_common_create(struct hso_serial *serial, int num_urbs,
serial->minor = minor;
serial->magic = HSO_SERIAL_MAGIC;
spin_lock_init(&serial->serial_lock);
- tty_port_init(&serial->port);
serial->num_rx_urbs = num_urbs;
/* RX, allocate urb and initialize */
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 328397c6673..adfab3fc547 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -413,7 +413,9 @@ static const struct usb_device_id products[] = {
/* 5. Gobi 2000 and 3000 devices */
{QMI_GOBI_DEVICE(0x413c, 0x8186)}, /* Dell Gobi 2000 Modem device (N0218, VU936) */
+ {QMI_GOBI_DEVICE(0x413c, 0x8194)}, /* Dell Gobi 3000 Composite */
{QMI_GOBI_DEVICE(0x05c6, 0x920b)}, /* Generic Gobi 2000 Modem device */
+ {QMI_GOBI_DEVICE(0x05c6, 0x920d)}, /* Gobi 3000 Composite */
{QMI_GOBI_DEVICE(0x05c6, 0x9225)}, /* Sony Gobi 2000 Modem device (N0279, VU730) */
{QMI_GOBI_DEVICE(0x05c6, 0x9245)}, /* Samsung Gobi 2000 Modem device (VL176) */
{QMI_GOBI_DEVICE(0x03f0, 0x251d)}, /* HP Gobi 2000 Modem device (VP412) */
@@ -441,6 +443,8 @@ static const struct usb_device_id products[] = {
{QMI_GOBI_DEVICE(0x1199, 0x9015)}, /* Sierra Wireless Gobi 3000 Modem device */
{QMI_GOBI_DEVICE(0x1199, 0x9019)}, /* Sierra Wireless Gobi 3000 Modem device */
{QMI_GOBI_DEVICE(0x1199, 0x901b)}, /* Sierra Wireless MC7770 */
+ {QMI_GOBI_DEVICE(0x12d1, 0x14f1)}, /* Sony Gobi 3000 Composite */
+ {QMI_GOBI_DEVICE(0x1410, 0xa021)}, /* Foxconn Gobi 3000 Modem device (Novatel E396) */
{ } /* END */
};
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index 8531c1caac2..fd4b26d46fd 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -1573,7 +1573,7 @@ int usbnet_resume (struct usb_interface *intf)
netif_device_present(dev->net) &&
!timer_pending(&dev->delay) &&
!test_bit(EVENT_RX_HALT, &dev->flags))
- rx_alloc_submit(dev, GFP_KERNEL);
+ rx_alloc_submit(dev, GFP_NOIO);
if (!(dev->txq.qlen >= TX_QLEN(dev)))
netif_tx_wake_all_queues(dev->net);
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index 4026c906cc7..b7e0258887e 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -1482,7 +1482,7 @@ ath5k_eeprom_read_target_rate_pwr_info(struct ath5k_hw *ah, unsigned int mode)
case AR5K_EEPROM_MODE_11A:
offset += AR5K_EEPROM_TARGET_PWR_OFF_11A(ee->ee_version);
rate_pcal_info = ee->ee_rate_tpwr_a;
- ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_5GHZ_CHAN;
+ ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_5GHZ_RATE_CHAN;
break;
case AR5K_EEPROM_MODE_11B:
offset += AR5K_EEPROM_TARGET_PWR_OFF_11B(ee->ee_version);
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h
index dc2bcfeadeb..94a9bbea687 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.h
+++ b/drivers/net/wireless/ath/ath5k/eeprom.h
@@ -182,6 +182,7 @@
#define AR5K_EEPROM_EEP_DELTA 10
#define AR5K_EEPROM_N_MODES 3
#define AR5K_EEPROM_N_5GHZ_CHAN 10
+#define AR5K_EEPROM_N_5GHZ_RATE_CHAN 8
#define AR5K_EEPROM_N_2GHZ_CHAN 3
#define AR5K_EEPROM_N_2GHZ_CHAN_2413 4
#define AR5K_EEPROM_N_2GHZ_CHAN_MAX 4
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
index 192ad5c1fcc..a5edebeb0b4 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
@@ -1233,6 +1233,9 @@ uint brcms_reset(struct brcms_info *wl)
/* dpc will not be rescheduled */
wl->resched = false;
+ /* inform publicly that interface is down */
+ wl->pub->up = false;
+
return 0;
}
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 95aa8e1683e..83324b32165 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -2042,7 +2042,8 @@ static void isr_indicate_associated(struct ipw2100_priv *priv, u32 status)
return;
}
len = ETH_ALEN;
- ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, &bssid, &len);
+ ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, bssid,
+ &len);
if (ret) {
IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
__LINE__);
diff --git a/drivers/net/wireless/iwlwifi/dvm/debugfs.c b/drivers/net/wireless/iwlwifi/dvm/debugfs.c
index 46782f1102a..a47b306b522 100644
--- a/drivers/net/wireless/iwlwifi/dvm/debugfs.c
+++ b/drivers/net/wireless/iwlwifi/dvm/debugfs.c
@@ -124,6 +124,9 @@ static ssize_t iwl_dbgfs_sram_read(struct file *file,
const struct fw_img *img;
size_t bufsz;
+ if (!iwl_is_ready_rf(priv))
+ return -EAGAIN;
+
/* default is to dump the entire data segment */
if (!priv->dbgfs_sram_offset && !priv->dbgfs_sram_len) {
priv->dbgfs_sram_offset = 0x800000;
diff --git a/drivers/net/wireless/iwlwifi/pcie/internal.h b/drivers/net/wireless/iwlwifi/pcie/internal.h
index d9694c58208..4ffc18dc3a5 100644
--- a/drivers/net/wireless/iwlwifi/pcie/internal.h
+++ b/drivers/net/wireless/iwlwifi/pcie/internal.h
@@ -350,7 +350,7 @@ int iwl_queue_space(const struct iwl_queue *q);
/*****************************************************
* Error handling
******************************************************/
-int iwl_dump_fh(struct iwl_trans *trans, char **buf, bool display);
+int iwl_dump_fh(struct iwl_trans *trans, char **buf);
void iwl_dump_csr(struct iwl_trans *trans);
/*****************************************************
diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c
index 39a6ca1f009..d1a61ba6247 100644
--- a/drivers/net/wireless/iwlwifi/pcie/rx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/rx.c
@@ -555,7 +555,7 @@ static void iwl_irq_handle_error(struct iwl_trans *trans)
}
iwl_dump_csr(trans);
- iwl_dump_fh(trans, NULL, false);
+ iwl_dump_fh(trans, NULL);
iwl_op_mode_nic_error(trans->op_mode);
}
diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c
index 939c2f78df5..1e86ea2266d 100644
--- a/drivers/net/wireless/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/iwlwifi/pcie/trans.c
@@ -1649,13 +1649,9 @@ static const char *get_fh_string(int cmd)
#undef IWL_CMD
}
-int iwl_dump_fh(struct iwl_trans *trans, char **buf, bool display)
+int iwl_dump_fh(struct iwl_trans *trans, char **buf)
{
int i;
-#ifdef CONFIG_IWLWIFI_DEBUG
- int pos = 0;
- size_t bufsz = 0;
-#endif
static const u32 fh_tbl[] = {
FH_RSCSR_CHNL0_STTS_WPTR_REG,
FH_RSCSR_CHNL0_RBDCB_BASE_REG,
@@ -1667,29 +1663,35 @@ int iwl_dump_fh(struct iwl_trans *trans, char **buf, bool display)
FH_TSSR_TX_STATUS_REG,
FH_TSSR_TX_ERROR_REG
};
-#ifdef CONFIG_IWLWIFI_DEBUG
- if (display) {
- bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40;
+
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+ if (buf) {
+ int pos = 0;
+ size_t bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40;
+
*buf = kmalloc(bufsz, GFP_KERNEL);
if (!*buf)
return -ENOMEM;
+
pos += scnprintf(*buf + pos, bufsz - pos,
"FH register values:\n");
- for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) {
+
+ for (i = 0; i < ARRAY_SIZE(fh_tbl); i++)
pos += scnprintf(*buf + pos, bufsz - pos,
" %34s: 0X%08x\n",
get_fh_string(fh_tbl[i]),
iwl_read_direct32(trans, fh_tbl[i]));
- }
+
return pos;
}
#endif
+
IWL_ERR(trans, "FH register values:\n");
- for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) {
+ for (i = 0; i < ARRAY_SIZE(fh_tbl); i++)
IWL_ERR(trans, " %34s: 0X%08x\n",
get_fh_string(fh_tbl[i]),
iwl_read_direct32(trans, fh_tbl[i]));
- }
+
return 0;
}
@@ -1982,11 +1984,11 @@ static ssize_t iwl_dbgfs_fh_reg_read(struct file *file,
size_t count, loff_t *ppos)
{
struct iwl_trans *trans = file->private_data;
- char *buf;
+ char *buf = NULL;
int pos = 0;
ssize_t ret = -EFAULT;
- ret = pos = iwl_dump_fh(trans, &buf, true);
+ ret = pos = iwl_dump_fh(trans, &buf);
if (buf) {
ret = simple_read_from_buffer(user_buf,
count, ppos, buf, pos);
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index 30899901aef..650f79a1f2b 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -57,8 +57,7 @@
static const struct ethtool_ops xennet_ethtool_ops;
struct netfront_cb {
- struct page *page;
- unsigned offset;
+ int pull_to;
};
#define NETFRONT_SKB_CB(skb) ((struct netfront_cb *)((skb)->cb))
@@ -867,15 +866,9 @@ static int handle_incoming_queue(struct net_device *dev,
struct sk_buff *skb;
while ((skb = __skb_dequeue(rxq)) != NULL) {
- struct page *page = NETFRONT_SKB_CB(skb)->page;
- void *vaddr = page_address(page);
- unsigned offset = NETFRONT_SKB_CB(skb)->offset;
-
- memcpy(skb->data, vaddr + offset,
- skb_headlen(skb));
+ int pull_to = NETFRONT_SKB_CB(skb)->pull_to;
- if (page != skb_frag_page(&skb_shinfo(skb)->frags[0]))
- __free_page(page);
+ __pskb_pull_tail(skb, pull_to - skb_headlen(skb));
/* Ethernet work: Delayed to here as it peeks the header. */
skb->protocol = eth_type_trans(skb, dev);
@@ -913,7 +906,6 @@ static int xennet_poll(struct napi_struct *napi, int budget)
struct sk_buff_head errq;
struct sk_buff_head tmpq;
unsigned long flags;
- unsigned int len;
int err;
spin_lock(&np->rx_lock);
@@ -955,24 +947,13 @@ err:
}
}
- NETFRONT_SKB_CB(skb)->page =
- skb_frag_page(&skb_shinfo(skb)->frags[0]);
- NETFRONT_SKB_CB(skb)->offset = rx->offset;
-
- len = rx->status;
- if (len > RX_COPY_THRESHOLD)
- len = RX_COPY_THRESHOLD;
- skb_put(skb, len);
+ NETFRONT_SKB_CB(skb)->pull_to = rx->status;
+ if (NETFRONT_SKB_CB(skb)->pull_to > RX_COPY_THRESHOLD)
+ NETFRONT_SKB_CB(skb)->pull_to = RX_COPY_THRESHOLD;
- if (rx->status > len) {
- skb_shinfo(skb)->frags[0].page_offset =
- rx->offset + len;
- skb_frag_size_set(&skb_shinfo(skb)->frags[0], rx->status - len);
- skb->data_len = rx->status - len;
- } else {
- __skb_fill_page_desc(skb, 0, NULL, 0, 0);
- skb_shinfo(skb)->nr_frags = 0;
- }
+ skb_shinfo(skb)->frags[0].page_offset = rx->offset;
+ skb_frag_size_set(&skb_shinfo(skb)->frags[0], rx->status);
+ skb->data_len = rx->status;
i = xennet_fill_frags(np, skb, &tmpq);
@@ -999,7 +980,7 @@ err:
* receive throughout using the standard receive
* buffer size was cut by 25%(!!!).
*/
- skb->truesize += skb->data_len - (RX_COPY_THRESHOLD - len);
+ skb->truesize += skb->data_len - RX_COPY_THRESHOLD;
skb->len += skb->data_len;
if (rx->flags & XEN_NETRXF_csum_blank)
diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c
index 5d6de380e42..352f96180bc 100644
--- a/drivers/parport/parport_gsc.c
+++ b/drivers/parport/parport_gsc.c
@@ -271,6 +271,7 @@ struct parport *__devinit parport_gsc_probe_port (unsigned long base,
if (!parport_SPP_supported (p)) {
/* No port. */
kfree (priv);
+ kfree(ops);
return NULL;
}
parport_PS2_supported (p);
diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c
index e9c32274df3..1631eeaf440 100644
--- a/drivers/parport/parport_serial.c
+++ b/drivers/parport/parport_serial.c
@@ -62,6 +62,7 @@ enum parport_pc_pci_cards {
timedia_9079a,
timedia_9079b,
timedia_9079c,
+ wch_ch353_2s1p,
};
/* each element directly indexed from enum list, above */
@@ -145,6 +146,7 @@ static struct parport_pc_pci cards[] __devinitdata = {
/* timedia_9079a */ { 1, { { 2, 3 }, } },
/* timedia_9079b */ { 1, { { 2, 3 }, } },
/* timedia_9079c */ { 1, { { 2, 3 }, } },
+ /* wch_ch353_2s1p*/ { 1, { { 2, -1}, } },
};
static struct pci_device_id parport_serial_pci_tbl[] = {
@@ -243,7 +245,8 @@ static struct pci_device_id parport_serial_pci_tbl[] = {
{ 0x1409, 0x7168, 0x1409, 0xb079, 0, 0, timedia_9079a },
{ 0x1409, 0x7168, 0x1409, 0xc079, 0, 0, timedia_9079b },
{ 0x1409, 0x7168, 0x1409, 0xd079, 0, 0, timedia_9079c },
-
+ /* WCH CARDS */
+ { 0x4348, 0x7053, 0x4348, 0x3253, 0, 0, wch_ch353_2s1p},
{ 0, } /* terminate list */
};
MODULE_DEVICE_TABLE(pci,parport_serial_pci_tbl);
@@ -460,6 +463,12 @@ static struct pciserial_board pci_parport_serial_boards[] __devinitdata = {
.base_baud = 921600,
.uart_offset = 8,
},
+ [wch_ch353_2s1p] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 2,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
};
struct parport_serial_private {
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 5270f1a9932..d6fd6b6d9d4 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -280,8 +280,12 @@ static long local_pci_probe(void *_ddi)
{
struct drv_dev_and_id *ddi = _ddi;
struct device *dev = &ddi->dev->dev;
+ struct device *parent = dev->parent;
int rc;
+ /* The parent bridge must be in active state when probing */
+ if (parent)
+ pm_runtime_get_sync(parent);
/* Unbound PCI devices are always set to disabled and suspended.
* During probe, the device is set to enabled and active and the
* usage count is incremented. If the driver supports runtime PM,
@@ -298,6 +302,8 @@ static long local_pci_probe(void *_ddi)
pm_runtime_set_suspended(dev);
pm_runtime_put_noidle(dev);
}
+ if (parent)
+ pm_runtime_put(parent);
return rc;
}
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 6869009c739..02d107b1528 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -458,6 +458,40 @@ boot_vga_show(struct device *dev, struct device_attribute *attr, char *buf)
}
struct device_attribute vga_attr = __ATTR_RO(boot_vga);
+static void
+pci_config_pm_runtime_get(struct pci_dev *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device *parent = dev->parent;
+
+ if (parent)
+ pm_runtime_get_sync(parent);
+ pm_runtime_get_noresume(dev);
+ /*
+ * pdev->current_state is set to PCI_D3cold during suspending,
+ * so wait until suspending completes
+ */
+ pm_runtime_barrier(dev);
+ /*
+ * Only need to resume devices in D3cold, because config
+ * registers are still accessible for devices suspended but
+ * not in D3cold.
+ */
+ if (pdev->current_state == PCI_D3cold)
+ pm_runtime_resume(dev);
+}
+
+static void
+pci_config_pm_runtime_put(struct pci_dev *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device *parent = dev->parent;
+
+ pm_runtime_put(dev);
+ if (parent)
+ pm_runtime_put_sync(parent);
+}
+
static ssize_t
pci_read_config(struct file *filp, struct kobject *kobj,
struct bin_attribute *bin_attr,
@@ -484,6 +518,8 @@ pci_read_config(struct file *filp, struct kobject *kobj,
size = count;
}
+ pci_config_pm_runtime_get(dev);
+
if ((off & 1) && size) {
u8 val;
pci_user_read_config_byte(dev, off, &val);
@@ -529,6 +565,8 @@ pci_read_config(struct file *filp, struct kobject *kobj,
--size;
}
+ pci_config_pm_runtime_put(dev);
+
return count;
}
@@ -549,6 +587,8 @@ pci_write_config(struct file* filp, struct kobject *kobj,
count = size;
}
+ pci_config_pm_runtime_get(dev);
+
if ((off & 1) && size) {
pci_user_write_config_byte(dev, off, data[off - init_off]);
off++;
@@ -587,6 +627,8 @@ pci_write_config(struct file* filp, struct kobject *kobj,
--size;
}
+ pci_config_pm_runtime_put(dev);
+
return count;
}
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index f3ea977a5b1..ab4bf5a4c2f 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1941,6 +1941,7 @@ void pci_pm_init(struct pci_dev *dev)
dev->pm_cap = pm;
dev->d3_delay = PCI_PM_D3_WAIT;
dev->d3cold_delay = PCI_PM_D3COLD_WAIT;
+ dev->d3cold_allowed = true;
dev->d1_support = false;
dev->d2_support = false;
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index 3a7eefcb270..e76b44777db 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -140,9 +140,17 @@ static int pcie_port_runtime_resume(struct device *dev)
{
return 0;
}
+
+static int pcie_port_runtime_idle(struct device *dev)
+{
+ /* Delay for a short while to prevent too frequent suspend/resume */
+ pm_schedule_suspend(dev, 10);
+ return -EBUSY;
+}
#else
#define pcie_port_runtime_suspend NULL
#define pcie_port_runtime_resume NULL
+#define pcie_port_runtime_idle NULL
#endif
static const struct dev_pm_ops pcie_portdrv_pm_ops = {
@@ -155,6 +163,7 @@ static const struct dev_pm_ops pcie_portdrv_pm_ops = {
.resume_noirq = pcie_port_resume_noirq,
.runtime_suspend = pcie_port_runtime_suspend,
.runtime_resume = pcie_port_runtime_resume,
+ .runtime_idle = pcie_port_runtime_idle,
};
#define PCIE_PORTDRV_PM_OPS (&pcie_portdrv_pm_ops)
@@ -200,6 +209,11 @@ static int __devinit pcie_portdrv_probe(struct pci_dev *dev,
return status;
pci_save_state(dev);
+ /*
+ * D3cold may not work properly on some PCIe port, so disable
+ * it by default.
+ */
+ dev->d3cold_allowed = false;
if (!pci_match_id(port_runtime_pm_black_list, dev))
pm_runtime_put_noidle(&dev->dev);
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 6c143b4497c..9f8a6b79a8e 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -144,15 +144,13 @@ static inline unsigned long decode_bar(struct pci_dev *dev, u32 bar)
case PCI_BASE_ADDRESS_MEM_TYPE_32:
break;
case PCI_BASE_ADDRESS_MEM_TYPE_1M:
- dev_info(&dev->dev, "1M mem BAR treated as 32-bit BAR\n");
+ /* 1M mem BAR treated as 32-bit BAR */
break;
case PCI_BASE_ADDRESS_MEM_TYPE_64:
flags |= IORESOURCE_MEM_64;
break;
default:
- dev_warn(&dev->dev,
- "mem unknown type %x treated as 32-bit BAR\n",
- mem_type);
+ /* mem unknown type treated as 32-bit BAR */
break;
}
return flags;
@@ -173,9 +171,11 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
u32 l, sz, mask;
u16 orig_cmd;
struct pci_bus_region region;
+ bool bar_too_big = false, bar_disabled = false;
mask = type ? PCI_ROM_ADDRESS_MASK : ~0;
+ /* No printks while decoding is disabled! */
if (!dev->mmio_always_on) {
pci_read_config_word(dev, PCI_COMMAND, &orig_cmd);
pci_write_config_word(dev, PCI_COMMAND,
@@ -240,8 +240,7 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
goto fail;
if ((sizeof(resource_size_t) < 8) && (sz64 > 0x100000000ULL)) {
- dev_err(&dev->dev, "reg %x: can't handle 64-bit BAR\n",
- pos);
+ bar_too_big = true;
goto fail;
}
@@ -252,12 +251,11 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
region.start = 0;
region.end = sz64;
pcibios_bus_to_resource(dev, res, &region);
+ bar_disabled = true;
} else {
region.start = l64;
region.end = l64 + sz64;
pcibios_bus_to_resource(dev, res, &region);
- dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n",
- pos, res);
}
} else {
sz = pci_size(l, sz, mask);
@@ -268,18 +266,23 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
region.start = l;
region.end = l + sz;
pcibios_bus_to_resource(dev, res, &region);
-
- dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n", pos, res);
}
- out:
+ goto out;
+
+
+fail:
+ res->flags = 0;
+out:
if (!dev->mmio_always_on)
pci_write_config_word(dev, PCI_COMMAND, orig_cmd);
+ if (bar_too_big)
+ dev_err(&dev->dev, "reg %x: can't handle 64-bit BAR\n", pos);
+ if (res->flags && !bar_disabled)
+ dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n", pos, res);
+
return (res->flags & IORESOURCE_MEM_64) ? 1 : 0;
- fail:
- res->flags = 0;
- goto out;
}
static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
diff --git a/drivers/power/avs/smartreflex.c b/drivers/power/avs/smartreflex.c
index 44efc6e202a..d4957b4edb6 100644
--- a/drivers/power/avs/smartreflex.c
+++ b/drivers/power/avs/smartreflex.c
@@ -27,6 +27,8 @@
#include <linux/pm_runtime.h>
#include <linux/power/smartreflex.h>
+#include <plat/cpu.h>
+
#define SMARTREFLEX_NAME_LEN 16
#define NVALUE_NAME_LEN 40
#define SR_DISABLE_TIMEOUT 200
diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c
index 831868904e0..1dd61f402b0 100644
--- a/drivers/rtc/rtc-at91sam9.c
+++ b/drivers/rtc/rtc-at91sam9.c
@@ -58,6 +58,7 @@ struct sam9_rtc {
struct rtc_device *rtcdev;
u32 imr;
void __iomem *gpbr;
+ int irq;
};
#define rtt_readl(rtc, field) \
@@ -292,7 +293,7 @@ static int __devinit at91_rtc_probe(struct platform_device *pdev)
{
struct resource *r, *r_gpbr;
struct sam9_rtc *rtc;
- int ret;
+ int ret, irq;
u32 mr;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -302,10 +303,18 @@ static int __devinit at91_rtc_probe(struct platform_device *pdev)
return -ENODEV;
}
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "failed to get interrupt resource\n");
+ return irq;
+ }
+
rtc = kzalloc(sizeof *rtc, GFP_KERNEL);
if (!rtc)
return -ENOMEM;
+ rtc->irq = irq;
+
/* platform setup code should have handled this; sigh */
if (!device_can_wakeup(&pdev->dev))
device_init_wakeup(&pdev->dev, 1);
@@ -345,11 +354,10 @@ static int __devinit at91_rtc_probe(struct platform_device *pdev)
}
/* register irq handler after we know what name we'll use */
- ret = request_irq(AT91_ID_SYS, at91_rtc_interrupt,
- IRQF_SHARED,
+ ret = request_irq(rtc->irq, at91_rtc_interrupt, IRQF_SHARED,
dev_name(&rtc->rtcdev->dev), rtc);
if (ret) {
- dev_dbg(&pdev->dev, "can't share IRQ %d?\n", AT91_ID_SYS);
+ dev_dbg(&pdev->dev, "can't share IRQ %d?\n", rtc->irq);
rtc_device_unregister(rtc->rtcdev);
goto fail_register;
}
@@ -386,7 +394,7 @@ static int __devexit at91_rtc_remove(struct platform_device *pdev)
/* disable all interrupts */
rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
- free_irq(AT91_ID_SYS, rtc);
+ free_irq(rtc->irq, rtc);
rtc_device_unregister(rtc->rtcdev);
@@ -423,7 +431,7 @@ static int at91_rtc_suspend(struct platform_device *pdev,
rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
if (rtc->imr) {
if (device_may_wakeup(&pdev->dev) && (mr & AT91_RTT_ALMIEN)) {
- enable_irq_wake(AT91_ID_SYS);
+ enable_irq_wake(rtc->irq);
/* don't let RTTINC cause wakeups */
if (mr & AT91_RTT_RTTINCIEN)
rtt_writel(rtc, MR, mr & ~AT91_RTT_RTTINCIEN);
@@ -441,7 +449,7 @@ static int at91_rtc_resume(struct platform_device *pdev)
if (rtc->imr) {
if (device_may_wakeup(&pdev->dev))
- disable_irq_wake(AT91_ID_SYS);
+ disable_irq_wake(rtc->irq);
mr = rtt_readl(rtc, MR);
rtt_writel(rtc, MR, mr | rtc->imr);
}
diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c
index 6c0116d48c7..9ffb6d5f17a 100644
--- a/drivers/s390/char/con3215.c
+++ b/drivers/s390/char/con3215.c
@@ -716,10 +716,17 @@ static int raw3215_probe (struct ccw_device *cdev)
static void raw3215_remove (struct ccw_device *cdev)
{
struct raw3215_info *raw;
+ unsigned int line;
ccw_device_set_offline(cdev);
raw = dev_get_drvdata(&cdev->dev);
if (raw) {
+ spin_lock(&raw3215_device_lock);
+ for (line = 0; line < NR_3215; line++)
+ if (raw3215[line] == raw)
+ break;
+ raw3215[line] = NULL;
+ spin_unlock(&raw3215_device_lock);
dev_set_drvdata(&cdev->dev, NULL);
raw3215_free_info(raw);
}
@@ -935,6 +942,19 @@ static int __init con3215_init(void)
console_initcall(con3215_init);
#endif
+static int tty3215_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+ struct raw3215_info *raw;
+
+ raw = raw3215[tty->index];
+ if (raw == NULL)
+ return -ENODEV;
+
+ tty->driver_data = raw;
+
+ return tty_port_install(&raw->port, driver, tty);
+}
+
/*
* tty3215_open
*
@@ -942,14 +962,9 @@ console_initcall(con3215_init);
*/
static int tty3215_open(struct tty_struct *tty, struct file * filp)
{
- struct raw3215_info *raw;
+ struct raw3215_info *raw = tty->driver_data;
int retval;
- raw = raw3215[tty->index];
- if (raw == NULL)
- return -ENODEV;
-
- tty->driver_data = raw;
tty_port_tty_set(&raw->port, tty);
tty->low_latency = 0; /* don't use bottom half for pushing chars */
@@ -1110,6 +1125,7 @@ static void tty3215_start(struct tty_struct *tty)
}
static const struct tty_operations tty3215_ops = {
+ .install = tty3215_install,
.open = tty3215_open,
.close = tty3215_close,
.write = tty3215_write,
diff --git a/drivers/s390/char/sclp_tty.c b/drivers/s390/char/sclp_tty.c
index 0792c85baaf..30ec09e3d03 100644
--- a/drivers/s390/char/sclp_tty.c
+++ b/drivers/s390/char/sclp_tty.c
@@ -567,6 +567,7 @@ sclp_tty_init(void)
driver->init_termios.c_lflag = ISIG | ECHO;
driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(driver, &sclp_ops);
+ tty_port_link_device(&sclp_port, driver, 0);
rc = tty_register_driver(driver);
if (rc) {
put_tty_driver(driver);
diff --git a/drivers/s390/char/sclp_vt220.c b/drivers/s390/char/sclp_vt220.c
index edfc0fd73dc..7e60f3d2f3f 100644
--- a/drivers/s390/char/sclp_vt220.c
+++ b/drivers/s390/char/sclp_vt220.c
@@ -691,6 +691,7 @@ static int __init sclp_vt220_tty_init(void)
driver->init_termios = tty_std_termios;
driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(driver, &sclp_vt220_ops);
+ tty_port_link_device(&sclp_vt220_port, driver, 0);
rc = tty_register_driver(driver);
if (rc)
diff --git a/drivers/s390/char/tty3270.c b/drivers/s390/char/tty3270.c
index 1928f3458d1..482ee028f84 100644
--- a/drivers/s390/char/tty3270.c
+++ b/drivers/s390/char/tty3270.c
@@ -842,17 +842,14 @@ static struct raw3270_fn tty3270_fn = {
};
/*
- * This routine is called whenever a 3270 tty is opened.
+ * This routine is called whenever a 3270 tty is opened first time.
*/
-static int
-tty3270_open(struct tty_struct *tty, struct file * filp)
+static int tty3270_install(struct tty_driver *driver, struct tty_struct *tty)
{
struct raw3270_view *view;
struct tty3270 *tp;
int i, rc;
- if (tty->count > 1)
- return 0;
/* Check if the tty3270 is already there. */
view = raw3270_find_view(&tty3270_fn,
tty->index + RAW3270_FIRSTMINOR);
@@ -865,7 +862,7 @@ tty3270_open(struct tty_struct *tty, struct file * filp)
/* why to reassign? */
tty_port_tty_set(&tp->port, tty);
tp->inattr = TF_INPUT;
- return 0;
+ return tty_port_install(&tp->port, driver, tty);
}
if (tty3270_max_index < tty->index + 1)
tty3270_max_index = tty->index + 1;
@@ -895,7 +892,6 @@ tty3270_open(struct tty_struct *tty, struct file * filp)
tty_port_tty_set(&tp->port, tty);
tty->low_latency = 0;
- tty->driver_data = tp;
tty->winsize.ws_row = tp->view.rows - 2;
tty->winsize.ws_col = tp->view.cols;
@@ -915,6 +911,15 @@ tty3270_open(struct tty_struct *tty, struct file * filp)
kbd_ascebc(tp->kbd, tp->view.ascebc);
raw3270_activate_view(&tp->view);
+
+ rc = tty_port_install(&tp->port, driver, tty);
+ if (rc) {
+ raw3270_put_view(&tp->view);
+ return rc;
+ }
+
+ tty->driver_data = tp;
+
return 0;
}
@@ -932,10 +937,17 @@ tty3270_close(struct tty_struct *tty, struct file * filp)
if (tp) {
tty->driver_data = NULL;
tty_port_tty_set(&tp->port, NULL);
- raw3270_put_view(&tp->view);
}
}
+static void tty3270_cleanup(struct tty_struct *tty)
+{
+ struct tty3270 *tp = tty->driver_data;
+
+ if (tp)
+ raw3270_put_view(&tp->view);
+}
+
/*
* We always have room.
*/
@@ -1737,7 +1749,8 @@ static long tty3270_compat_ioctl(struct tty_struct *tty,
#endif
static const struct tty_operations tty3270_ops = {
- .open = tty3270_open,
+ .install = tty3270_install,
+ .cleanup = tty3270_cleanup,
.close = tty3270_close,
.write = tty3270_write,
.put_char = tty3270_put_char,
@@ -1781,7 +1794,7 @@ static int __init tty3270_init(void)
driver->type = TTY_DRIVER_TYPE_SYSTEM;
driver->subtype = SYSTEM_TYPE_TTY;
driver->init_termios = tty_std_termios;
- driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_DYNAMIC_DEV;
+ driver->flags = TTY_DRIVER_RESET_TERMIOS;
tty_set_operations(driver, &tty3270_ops);
ret = tty_register_driver(driver);
if (ret) {
@@ -1800,6 +1813,7 @@ tty3270_exit(void)
driver = tty3270_driver;
tty3270_driver = NULL;
tty_unregister_driver(driver);
+ put_tty_driver(driver);
tty3270_del_views();
}
diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c
index 9b0d7169603..a3996a1c634 100644
--- a/drivers/spi/spi-omap-uwire.c
+++ b/drivers/spi/spi-omap-uwire.c
@@ -53,7 +53,8 @@
#include <asm/mach-types.h>
#include <plat/mux.h>
-#include <plat/omap7xx.h> /* OMAP7XX_IO_CONF registers */
+
+#include <mach/omap7xx.h> /* OMAP7XX_IO_CONF registers */
/* FIXME address is now a platform device resource,
diff --git a/drivers/staging/ipack/devices/ipoctal.c b/drivers/staging/ipack/devices/ipoctal.c
index fd0e30132ca..a68d981c259 100644
--- a/drivers/staging/ipack/devices/ipoctal.c
+++ b/drivers/staging/ipack/devices/ipoctal.c
@@ -502,7 +502,7 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr,
ipoctal->pointer_read[i] = 0;
ipoctal->pointer_write[i] = 0;
ipoctal->nb_bytes[i] = 0;
- tty_register_device(tty, i, NULL);
+ tty_port_register_device(&ipoctal->tty_port[i], tty, i, NULL);
/*
* Enable again the RX. TX will be enabled when
@@ -617,7 +617,7 @@ static void ipoctal_set_termios(struct tty_struct *tty,
struct ipoctal *ipoctal = tty->driver_data;
speed_t baud;
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
/* Disable and reset everything before change the setup */
ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
@@ -643,7 +643,7 @@ static void ipoctal_set_termios(struct tty_struct *tty,
default:
mr1 |= MR1_CHRL_8_BITS;
/* By default, select CS8 */
- tty->termios->c_cflag = (cflag & ~CSIZE) | CS8;
+ tty->termios.c_cflag = (cflag & ~CSIZE) | CS8;
break;
}
@@ -657,7 +657,7 @@ static void ipoctal_set_termios(struct tty_struct *tty,
mr1 |= MR1_PARITY_OFF;
/* Mark or space parity is not supported */
- tty->termios->c_cflag &= ~CMSPAR;
+ tty->termios.c_cflag &= ~CMSPAR;
/* Set stop bits */
if (cflag & CSTOPB)
@@ -690,10 +690,10 @@ static void ipoctal_set_termios(struct tty_struct *tty,
}
baud = tty_get_baud_rate(tty);
- tty_termios_encode_baud_rate(tty->termios, baud, baud);
+ tty_termios_encode_baud_rate(&tty->termios, baud, baud);
/* Set baud rate */
- switch (tty->termios->c_ospeed) {
+ switch (baud) {
case 75:
csr |= TX_CLK_75 | RX_CLK_75;
break;
@@ -734,7 +734,7 @@ static void ipoctal_set_termios(struct tty_struct *tty,
default:
csr |= TX_CLK_38400 | RX_CLK_38400;
/* In case of default, we establish 38400 bps */
- tty_termios_encode_baud_rate(tty->termios, 38400, 38400);
+ tty_termios_encode_baud_rate(&tty->termios, 38400, 38400);
break;
}
diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c
index 8a362f7af37..c90de969be8 100644
--- a/drivers/staging/serqt_usb2/serqt_usb2.c
+++ b/drivers/staging/serqt_usb2/serqt_usb2.c
@@ -315,10 +315,8 @@ static void qt_read_bulk_callback(struct urb *urb)
}
tty = tty_port_tty_get(&port->port);
- if (!tty) {
- dbg("%s - bad tty pointer - exiting", __func__);
+ if (!tty)
return;
- }
data = urb->transfer_buffer;
@@ -364,7 +362,7 @@ static void qt_read_bulk_callback(struct urb *urb)
goto exit;
}
- if (tty && RxCount) {
+ if (RxCount) {
flag_data = 0;
for (i = 0; i < RxCount; ++i) {
/* Look ahead code here */
@@ -428,7 +426,7 @@ static void qt_read_bulk_callback(struct urb *urb)
dbg("%s - failed resubmitting read urb, error %d",
__func__, result);
else {
- if (tty && RxCount) {
+ if (RxCount) {
tty_flip_buffer_push(tty);
tty_schedule_flip(tty);
}
@@ -897,8 +895,6 @@ static int qt_open(struct tty_struct *tty,
* Put this here to make it responsive to stty and defaults set by
* the tty layer
*/
- /* FIXME: is this needed? */
- /* qt_set_termios(tty, port, NULL); */
/* Check to see if we've set up our endpoint info yet */
if (port0->open_ports == 1) {
@@ -1195,7 +1191,7 @@ static void qt_set_termios(struct tty_struct *tty,
struct usb_serial_port *port,
struct ktermios *old_termios)
{
- struct ktermios *termios = tty->termios;
+ struct ktermios *termios = &tty->termios;
unsigned char new_LCR = 0;
unsigned int cflag = termios->c_cflag;
unsigned int index;
@@ -1204,7 +1200,7 @@ static void qt_set_termios(struct tty_struct *tty,
index = tty->index - port->serial->minor;
- switch (cflag) {
+ switch (cflag & CSIZE) {
case CS5:
new_LCR |= SERIAL_5_DATA;
break;
@@ -1215,6 +1211,8 @@ static void qt_set_termios(struct tty_struct *tty,
new_LCR |= SERIAL_7_DATA;
break;
default:
+ termios->c_cflag &= ~CSIZE;
+ termios->c_cflag |= CS8;
case CS8:
new_LCR |= SERIAL_8_DATA;
break;
@@ -1301,7 +1299,7 @@ static void qt_set_termios(struct tty_struct *tty,
dbg(__FILE__ "BoxSetSW_FlowCtrl (diabling) failed\n");
}
- tty->termios->c_cflag &= ~CMSPAR;
+ termios->c_cflag &= ~CMSPAR;
/* FIXME: Error cases should be returning the actual bits changed only */
}
diff --git a/drivers/staging/speakup/serialio.h b/drivers/staging/speakup/serialio.h
index 614271f9b99..55d68b5ad16 100644
--- a/drivers/staging/speakup/serialio.h
+++ b/drivers/staging/speakup/serialio.h
@@ -1,8 +1,7 @@
#ifndef _SPEAKUP_SERIAL_H
#define _SPEAKUP_SERIAL_H
-#include <linux/serial.h> /* for rs_table, serial constants &
- serial_uart_config */
+#include <linux/serial.h> /* for rs_table, serial constants */
#include <linux/serial_reg.h> /* for more serial constants */
#ifndef __sparc__
#include <asm/serial.h>
diff --git a/drivers/staging/tidspbridge/core/wdt.c b/drivers/staging/tidspbridge/core/wdt.c
index 870f934f4f3..453ef748bf4 100644
--- a/drivers/staging/tidspbridge/core/wdt.c
+++ b/drivers/staging/tidspbridge/core/wdt.c
@@ -25,7 +25,7 @@
#include <dspbridge/host_os.h>
-#define OMAP34XX_WDT3_BASE (L4_PER_34XX_BASE + 0x30000)
+#define INT_34XX_WDT3_IRQ (36 + NR_IRQS)
static struct dsp_wdt_setting dsp_wdt;
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 6cc4358f68c..42d0a2581a8 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -420,7 +420,7 @@ static void check_modem_status(struct serial_state *info)
tty_hangup(port->tty);
}
}
- if (port->flags & ASYNC_CTS_FLOW) {
+ if (tty_port_cts_enabled(port)) {
if (port->tty->hw_stopped) {
if (!(status & SER_CTS)) {
#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
@@ -646,7 +646,7 @@ static void shutdown(struct tty_struct *tty, struct serial_state *info)
custom.adkcon = AC_UARTBRK;
mb();
- if (tty->termios->c_cflag & HUPCL)
+ if (tty->termios.c_cflag & HUPCL)
info->MCR &= ~(SER_DTR|SER_RTS);
rtsdtr_ctrl(info->MCR);
@@ -670,7 +670,7 @@ static void change_speed(struct tty_struct *tty, struct serial_state *info,
int bits;
unsigned long flags;
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
/* Byte size is always 8 bits plus parity bit if requested */
@@ -707,8 +707,8 @@ static void change_speed(struct tty_struct *tty, struct serial_state *info,
/* If the quotient is zero refuse the change */
if (!quot && old_termios) {
/* FIXME: Will need updating for new tty in the end */
- tty->termios->c_cflag &= ~CBAUD;
- tty->termios->c_cflag |= (old_termios->c_cflag & CBAUD);
+ tty->termios.c_cflag &= ~CBAUD;
+ tty->termios.c_cflag |= (old_termios->c_cflag & CBAUD);
baud = tty_get_baud_rate(tty);
if (!baud)
baud = 9600;
@@ -984,7 +984,7 @@ static void rs_throttle(struct tty_struct * tty)
if (I_IXOFF(tty))
rs_send_xchar(tty, STOP_CHAR(tty));
- if (tty->termios->c_cflag & CRTSCTS)
+ if (tty->termios.c_cflag & CRTSCTS)
info->MCR &= ~SER_RTS;
local_irq_save(flags);
@@ -1012,7 +1012,7 @@ static void rs_unthrottle(struct tty_struct * tty)
else
rs_send_xchar(tty, START_CHAR(tty));
}
- if (tty->termios->c_cflag & CRTSCTS)
+ if (tty->termios.c_cflag & CRTSCTS)
info->MCR |= SER_RTS;
local_irq_save(flags);
rtsdtr_ctrl(info->MCR);
@@ -1033,7 +1033,7 @@ static int get_serial_info(struct tty_struct *tty, struct serial_state *state,
if (!retinfo)
return -EFAULT;
memset(&tmp, 0, sizeof(tmp));
- tty_lock();
+ tty_lock(tty);
tmp.line = tty->index;
tmp.port = state->port;
tmp.flags = state->tport.flags;
@@ -1042,7 +1042,7 @@ static int get_serial_info(struct tty_struct *tty, struct serial_state *state,
tmp.close_delay = state->tport.close_delay;
tmp.closing_wait = state->tport.closing_wait;
tmp.custom_divisor = state->custom_divisor;
- tty_unlock();
+ tty_unlock(tty);
if (copy_to_user(retinfo,&tmp,sizeof(*retinfo)))
return -EFAULT;
return 0;
@@ -1059,12 +1059,12 @@ static int set_serial_info(struct tty_struct *tty, struct serial_state *state,
if (copy_from_user(&new_serial,new_info,sizeof(new_serial)))
return -EFAULT;
- tty_lock();
+ tty_lock(tty);
change_spd = ((new_serial.flags ^ port->flags) & ASYNC_SPD_MASK) ||
new_serial.custom_divisor != state->custom_divisor;
if (new_serial.irq || new_serial.port != state->port ||
new_serial.xmit_fifo_size != state->xmit_fifo_size) {
- tty_unlock();
+ tty_unlock(tty);
return -EINVAL;
}
@@ -1074,7 +1074,7 @@ static int set_serial_info(struct tty_struct *tty, struct serial_state *state,
(new_serial.xmit_fifo_size != state->xmit_fifo_size) ||
((new_serial.flags & ~ASYNC_USR_MASK) !=
(port->flags & ~ASYNC_USR_MASK))) {
- tty_unlock();
+ tty_unlock(tty);
return -EPERM;
}
port->flags = ((port->flags & ~ASYNC_USR_MASK) |
@@ -1084,7 +1084,7 @@ static int set_serial_info(struct tty_struct *tty, struct serial_state *state,
}
if (new_serial.baud_base < 9600) {
- tty_unlock();
+ tty_unlock(tty);
return -EINVAL;
}
@@ -1116,7 +1116,7 @@ check_and_exit:
}
} else
retval = startup(tty, state);
- tty_unlock();
+ tty_unlock(tty);
return retval;
}
@@ -1330,7 +1330,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
struct serial_state *info = tty->driver_data;
unsigned long flags;
- unsigned int cflag = tty->termios->c_cflag;
+ unsigned int cflag = tty->termios.c_cflag;
change_speed(tty, info, old_termios);
@@ -1347,7 +1347,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
if (!(old_termios->c_cflag & CBAUD) &&
(cflag & CBAUD)) {
info->MCR |= SER_DTR;
- if (!(tty->termios->c_cflag & CRTSCTS) ||
+ if (!(tty->termios.c_cflag & CRTSCTS) ||
!test_bit(TTY_THROTTLED, &tty->flags)) {
info->MCR |= SER_RTS;
}
@@ -1358,7 +1358,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
/* Handle turning off CRTSCTS */
if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios->c_cflag & CRTSCTS)) {
+ !(tty->termios.c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
rs_start(tty);
}
@@ -1371,7 +1371,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
* or not. Hence, this may change.....
*/
if (!(old_termios->c_cflag & CLOCAL) &&
- (tty->termios->c_cflag & CLOCAL))
+ (tty->termios.c_cflag & CLOCAL))
wake_up_interruptible(&info->open_wait);
#endif
}
@@ -1710,10 +1710,6 @@ static int __init amiga_serial_probe(struct platform_device *pdev)
serial_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(serial_driver, &serial_ops);
- error = tty_register_driver(serial_driver);
- if (error)
- goto fail_put_tty_driver;
-
state = rs_table;
state->port = (int)&custom.serdatr; /* Just to give it a value */
state->custom_divisor = 0;
@@ -1724,6 +1720,11 @@ static int __init amiga_serial_probe(struct platform_device *pdev)
state->icount.overrun = state->icount.brk = 0;
tty_port_init(&state->tport);
state->tport.ops = &amiga_port_ops;
+ tty_port_link_device(&state->tport, serial_driver, 0);
+
+ error = tty_register_driver(serial_driver);
+ if (error)
+ goto fail_put_tty_driver;
printk(KERN_INFO "ttyS0 is the amiga builtin serial port\n");
diff --git a/drivers/tty/bfin_jtag_comm.c b/drivers/tty/bfin_jtag_comm.c
index 61fc74fe174..02b7d3a0969 100644
--- a/drivers/tty/bfin_jtag_comm.c
+++ b/drivers/tty/bfin_jtag_comm.c
@@ -263,6 +263,7 @@ static int __init bfin_jc_init(void)
bfin_jc_driver->subtype = SERIAL_TYPE_NORMAL;
bfin_jc_driver->init_termios = tty_std_termios;
tty_set_operations(bfin_jc_driver, &bfin_jc_ops);
+ tty_port_link_device(&port, bfin_jc_driver, 0);
ret = tty_register_driver(bfin_jc_driver);
if (ret)
diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c
index e61cabdd69d..0a6a0bc1b59 100644
--- a/drivers/tty/cyclades.c
+++ b/drivers/tty/cyclades.c
@@ -727,7 +727,7 @@ static void cyy_chip_modem(struct cyclades_card *cinfo, int chip,
else
tty_hangup(tty);
}
- if ((mdm_change & CyCTS) && (info->port.flags & ASYNC_CTS_FLOW)) {
+ if ((mdm_change & CyCTS) && tty_port_cts_enabled(&info->port)) {
if (tty->hw_stopped) {
if (mdm_status & CyCTS) {
/* cy_start isn't used
@@ -1459,7 +1459,7 @@ static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty)
info->port.xmit_buf = NULL;
free_page((unsigned long)temp);
}
- if (tty->termios->c_cflag & HUPCL)
+ if (tty->termios.c_cflag & HUPCL)
cyy_change_rts_dtr(info, 0, TIOCM_RTS | TIOCM_DTR);
cyy_issue_cmd(info, CyCHAN_CTL | CyDIS_RCVR);
@@ -1488,7 +1488,7 @@ static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty)
free_page((unsigned long)temp);
}
- if (tty->termios->c_cflag & HUPCL)
+ if (tty->termios.c_cflag & HUPCL)
tty_port_lower_dtr_rts(&info->port);
set_bit(TTY_IO_ERROR, &tty->flags);
@@ -1599,7 +1599,7 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
* If the port is the middle of closing, bail out now
*/
if (tty_hung_up_p(filp) || (info->port.flags & ASYNC_CLOSING)) {
- wait_event_interruptible_tty(info->port.close_wait,
+ wait_event_interruptible_tty(tty, info->port.close_wait,
!(info->port.flags & ASYNC_CLOSING));
return (info->port.flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS;
}
@@ -1999,14 +1999,11 @@ static void cy_set_line_char(struct cyclades_port *info, struct tty_struct *tty)
int baud, baud_rate = 0;
int i;
- if (!tty->termios) /* XXX can this happen at all? */
- return;
-
if (info->line == -1)
return;
- cflag = tty->termios->c_cflag;
- iflag = tty->termios->c_iflag;
+ cflag = tty->termios.c_cflag;
+ iflag = tty->termios.c_iflag;
/*
* Set up the tty->alt_speed kludge
@@ -2825,7 +2822,7 @@ static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
cy_set_line_char(info, tty);
if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios->c_cflag & CRTSCTS)) {
+ !(tty->termios.c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
cy_start(tty);
}
@@ -2837,7 +2834,7 @@ static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
* or not. Hence, this may change.....
*/
if (!(old_termios->c_cflag & CLOCAL) &&
- (tty->termios->c_cflag & CLOCAL))
+ (tty->termios.c_cflag & CLOCAL))
wake_up_interruptible(&info->port.open_wait);
#endif
} /* cy_set_termios */
@@ -2899,7 +2896,7 @@ static void cy_throttle(struct tty_struct *tty)
info->throttle = 1;
}
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
if (!cy_is_Z(card)) {
spin_lock_irqsave(&card->card_lock, flags);
cyy_change_rts_dtr(info, 0, TIOCM_RTS);
@@ -2938,7 +2935,7 @@ static void cy_unthrottle(struct tty_struct *tty)
cy_send_xchar(tty, START_CHAR(tty));
}
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
card = info->card;
if (!cy_is_Z(card)) {
spin_lock_irqsave(&card->card_lock, flags);
@@ -3289,9 +3286,10 @@ static unsigned short __devinit cyy_init_card(void __iomem *true_base_addr,
static int __init cy_detect_isa(void)
{
#ifdef CONFIG_ISA
+ struct cyclades_card *card;
unsigned short cy_isa_irq, nboard;
void __iomem *cy_isa_address;
- unsigned short i, j, cy_isa_nchan;
+ unsigned short i, j, k, cy_isa_nchan;
int isparam = 0;
nboard = 0;
@@ -3349,7 +3347,8 @@ static int __init cy_detect_isa(void)
}
/* fill the next cy_card structure available */
for (j = 0; j < NR_CARDS; j++) {
- if (cy_card[j].base_addr == NULL)
+ card = &cy_card[j];
+ if (card->base_addr == NULL)
break;
}
if (j == NR_CARDS) { /* no more cy_cards available */
@@ -3363,7 +3362,7 @@ static int __init cy_detect_isa(void)
/* allocate IRQ */
if (request_irq(cy_isa_irq, cyy_interrupt,
- 0, "Cyclom-Y", &cy_card[j])) {
+ 0, "Cyclom-Y", card)) {
printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but "
"could not allocate IRQ#%d.\n",
(unsigned long)cy_isa_address, cy_isa_irq);
@@ -3372,16 +3371,16 @@ static int __init cy_detect_isa(void)
}
/* set cy_card */
- cy_card[j].base_addr = cy_isa_address;
- cy_card[j].ctl_addr.p9050 = NULL;
- cy_card[j].irq = (int)cy_isa_irq;
- cy_card[j].bus_index = 0;
- cy_card[j].first_line = cy_next_channel;
- cy_card[j].num_chips = cy_isa_nchan / CyPORTS_PER_CHIP;
- cy_card[j].nports = cy_isa_nchan;
- if (cy_init_card(&cy_card[j])) {
- cy_card[j].base_addr = NULL;
- free_irq(cy_isa_irq, &cy_card[j]);
+ card->base_addr = cy_isa_address;
+ card->ctl_addr.p9050 = NULL;
+ card->irq = (int)cy_isa_irq;
+ card->bus_index = 0;
+ card->first_line = cy_next_channel;
+ card->num_chips = cy_isa_nchan / CyPORTS_PER_CHIP;
+ card->nports = cy_isa_nchan;
+ if (cy_init_card(card)) {
+ card->base_addr = NULL;
+ free_irq(cy_isa_irq, card);
iounmap(cy_isa_address);
continue;
}
@@ -3393,9 +3392,10 @@ static int __init cy_detect_isa(void)
(unsigned long)(cy_isa_address + (CyISA_Ywin - 1)),
cy_isa_irq, cy_isa_nchan, cy_next_channel);
- for (j = cy_next_channel;
- j < cy_next_channel + cy_isa_nchan; j++)
- tty_register_device(cy_serial_driver, j, NULL);
+ for (k = 0, j = cy_next_channel;
+ j < cy_next_channel + cy_isa_nchan; j++, k++)
+ tty_port_register_device(&card->ports[k].port,
+ cy_serial_driver, j, NULL);
cy_next_channel += cy_isa_nchan;
}
return nboard;
@@ -3695,10 +3695,11 @@ err:
static int __devinit cy_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
+ struct cyclades_card *card;
void __iomem *addr0 = NULL, *addr2 = NULL;
char *card_name = NULL;
u32 uninitialized_var(mailbox);
- unsigned int device_id, nchan = 0, card_no, i;
+ unsigned int device_id, nchan = 0, card_no, i, j;
unsigned char plx_ver;
int retval, irq;
@@ -3829,7 +3830,8 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
}
/* fill the next cy_card structure available */
for (card_no = 0; card_no < NR_CARDS; card_no++) {
- if (cy_card[card_no].base_addr == NULL)
+ card = &cy_card[card_no];
+ if (card->base_addr == NULL)
break;
}
if (card_no == NR_CARDS) { /* no more cy_cards available */
@@ -3843,27 +3845,26 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) {
/* allocate IRQ */
retval = request_irq(irq, cyy_interrupt,
- IRQF_SHARED, "Cyclom-Y", &cy_card[card_no]);
+ IRQF_SHARED, "Cyclom-Y", card);
if (retval) {
dev_err(&pdev->dev, "could not allocate IRQ\n");
goto err_unmap;
}
- cy_card[card_no].num_chips = nchan / CyPORTS_PER_CHIP;
+ card->num_chips = nchan / CyPORTS_PER_CHIP;
} else {
struct FIRM_ID __iomem *firm_id = addr2 + ID_ADDRESS;
struct ZFW_CTRL __iomem *zfw_ctrl;
zfw_ctrl = addr2 + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
- cy_card[card_no].hw_ver = mailbox;
- cy_card[card_no].num_chips = (unsigned int)-1;
- cy_card[card_no].board_ctrl = &zfw_ctrl->board_ctrl;
+ card->hw_ver = mailbox;
+ card->num_chips = (unsigned int)-1;
+ card->board_ctrl = &zfw_ctrl->board_ctrl;
#ifdef CONFIG_CYZ_INTR
/* allocate IRQ only if board has an IRQ */
if (irq != 0 && irq != 255) {
retval = request_irq(irq, cyz_interrupt,
- IRQF_SHARED, "Cyclades-Z",
- &cy_card[card_no]);
+ IRQF_SHARED, "Cyclades-Z", card);
if (retval) {
dev_err(&pdev->dev, "could not allocate IRQ\n");
goto err_unmap;
@@ -3873,17 +3874,17 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
}
/* set cy_card */
- cy_card[card_no].base_addr = addr2;
- cy_card[card_no].ctl_addr.p9050 = addr0;
- cy_card[card_no].irq = irq;
- cy_card[card_no].bus_index = 1;
- cy_card[card_no].first_line = cy_next_channel;
- cy_card[card_no].nports = nchan;
- retval = cy_init_card(&cy_card[card_no]);
+ card->base_addr = addr2;
+ card->ctl_addr.p9050 = addr0;
+ card->irq = irq;
+ card->bus_index = 1;
+ card->first_line = cy_next_channel;
+ card->nports = nchan;
+ retval = cy_init_card(card);
if (retval)
goto err_null;
- pci_set_drvdata(pdev, &cy_card[card_no]);
+ pci_set_drvdata(pdev, card);
if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo ||
device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) {
@@ -3909,14 +3910,15 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
dev_info(&pdev->dev, "%s/PCI #%d found: %d channels starting from "
"port %d.\n", card_name, card_no + 1, nchan, cy_next_channel);
- for (i = cy_next_channel; i < cy_next_channel + nchan; i++)
- tty_register_device(cy_serial_driver, i, &pdev->dev);
+ for (j = 0, i = cy_next_channel; i < cy_next_channel + nchan; i++, j++)
+ tty_port_register_device(&card->ports[j].port,
+ cy_serial_driver, i, &pdev->dev);
cy_next_channel += nchan;
return 0;
err_null:
- cy_card[card_no].base_addr = NULL;
- free_irq(irq, &cy_card[card_no]);
+ card->base_addr = NULL;
+ free_irq(irq, card);
err_unmap:
iounmap(addr0);
if (addr2)
diff --git a/drivers/tty/ehv_bytechan.c b/drivers/tty/ehv_bytechan.c
index 4813684cb63..4ab936b7aac 100644
--- a/drivers/tty/ehv_bytechan.c
+++ b/drivers/tty/ehv_bytechan.c
@@ -738,16 +738,17 @@ static int __devinit ehv_bc_tty_probe(struct platform_device *pdev)
goto error;
}
- bc->dev = tty_register_device(ehv_bc_driver, i, &pdev->dev);
+ tty_port_init(&bc->port);
+ bc->port.ops = &ehv_bc_tty_port_ops;
+
+ bc->dev = tty_port_register_device(&bc->port, ehv_bc_driver, i,
+ &pdev->dev);
if (IS_ERR(bc->dev)) {
ret = PTR_ERR(bc->dev);
dev_err(&pdev->dev, "could not register tty (ret=%i)\n", ret);
goto error;
}
- tty_port_init(&bc->port);
- bc->port.ops = &ehv_bc_tty_port_ops;
-
dev_set_drvdata(&pdev->dev, bc);
dev_info(&pdev->dev, "registered /dev/%s%u for byte channel %u\n",
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index 2d691eb7c40..7f80f15681c 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -299,20 +299,33 @@ static void hvc_unthrottle(struct tty_struct *tty)
hvc_kick();
}
+static int hvc_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+ struct hvc_struct *hp;
+ int rc;
+
+ /* Auto increments kref reference if found. */
+ if (!(hp = hvc_get_by_index(tty->index)))
+ return -ENODEV;
+
+ tty->driver_data = hp;
+
+ rc = tty_port_install(&hp->port, driver, tty);
+ if (rc)
+ tty_port_put(&hp->port);
+ return rc;
+}
+
/*
* The TTY interface won't be used until after the vio layer has exposed the vty
* adapter to the kernel.
*/
static int hvc_open(struct tty_struct *tty, struct file * filp)
{
- struct hvc_struct *hp;
+ struct hvc_struct *hp = tty->driver_data;
unsigned long flags;
int rc = 0;
- /* Auto increments kref reference if found. */
- if (!(hp = hvc_get_by_index(tty->index)))
- return -ENODEV;
-
spin_lock_irqsave(&hp->port.lock, flags);
/* Check and then increment for fast path open. */
if (hp->port.count++ > 0) {
@@ -322,7 +335,6 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
} /* else count == 0 */
spin_unlock_irqrestore(&hp->port.lock, flags);
- tty->driver_data = hp;
tty_port_tty_set(&hp->port, tty);
if (hp->ops->notifier_add)
@@ -389,6 +401,11 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
hp->vtermno, hp->port.count);
spin_unlock_irqrestore(&hp->port.lock, flags);
}
+}
+
+static void hvc_cleanup(struct tty_struct *tty)
+{
+ struct hvc_struct *hp = tty->driver_data;
tty_port_put(&hp->port);
}
@@ -792,8 +809,10 @@ static void hvc_poll_put_char(struct tty_driver *driver, int line, char ch)
#endif
static const struct tty_operations hvc_ops = {
+ .install = hvc_install,
.open = hvc_open,
.close = hvc_close,
+ .cleanup = hvc_cleanup,
.write = hvc_write,
.hangup = hvc_hangup,
.unthrottle = hvc_unthrottle,
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index d56788c8397..cab5c7adf8e 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -1102,27 +1102,20 @@ static struct hvcs_struct *hvcs_get_by_index(int index)
return NULL;
}
-/*
- * This is invoked via the tty_open interface when a user app connects to the
- * /dev node.
- */
-static int hvcs_open(struct tty_struct *tty, struct file *filp)
+static int hvcs_install(struct tty_driver *driver, struct tty_struct *tty)
{
struct hvcs_struct *hvcsd;
- int rc, retval = 0;
- unsigned long flags;
- unsigned int irq;
struct vio_dev *vdev;
- unsigned long unit_address;
-
- if (tty->driver_data)
- goto fast_open;
+ unsigned long unit_address, flags;
+ unsigned int irq;
+ int retval;
/*
* Is there a vty-server that shares the same index?
* This function increments the kref index.
*/
- if (!(hvcsd = hvcs_get_by_index(tty->index))) {
+ hvcsd = hvcs_get_by_index(tty->index);
+ if (!hvcsd) {
printk(KERN_WARNING "HVCS: open failed, no device associated"
" with tty->index %d.\n", tty->index);
return -ENODEV;
@@ -1130,11 +1123,16 @@ static int hvcs_open(struct tty_struct *tty, struct file *filp)
spin_lock_irqsave(&hvcsd->lock, flags);
- if (hvcsd->connected == 0)
- if ((retval = hvcs_partner_connect(hvcsd)))
- goto error_release;
+ if (hvcsd->connected == 0) {
+ retval = hvcs_partner_connect(hvcsd);
+ if (retval) {
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ printk(KERN_WARNING "HVCS: partner connect failed.\n");
+ goto err_put;
+ }
+ }
- hvcsd->port.count = 1;
+ hvcsd->port.count = 0;
hvcsd->port.tty = tty;
tty->driver_data = hvcsd;
@@ -1155,37 +1153,48 @@ static int hvcs_open(struct tty_struct *tty, struct file *filp)
* This must be done outside of the spinlock because it requests irqs
* and will grab the spinlock and free the connection if it fails.
*/
- if (((rc = hvcs_enable_device(hvcsd, unit_address, irq, vdev)))) {
- tty_port_put(&hvcsd->port);
+ retval = hvcs_enable_device(hvcsd, unit_address, irq, vdev);
+ if (retval) {
printk(KERN_WARNING "HVCS: enable device failed.\n");
- return rc;
+ goto err_put;
}
- goto open_success;
+ retval = tty_port_install(&hvcsd->port, driver, tty);
+ if (retval)
+ goto err_irq;
-fast_open:
- hvcsd = tty->driver_data;
+ return 0;
+err_irq:
+ spin_lock_irqsave(&hvcsd->lock, flags);
+ vio_disable_interrupts(hvcsd->vdev);
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ free_irq(irq, hvcsd);
+err_put:
+ tty_port_put(&hvcsd->port);
+
+ return retval;
+}
+
+/*
+ * This is invoked via the tty_open interface when a user app connects to the
+ * /dev node.
+ */
+static int hvcs_open(struct tty_struct *tty, struct file *filp)
+{
+ struct hvcs_struct *hvcsd = tty->driver_data;
+ unsigned long flags;
spin_lock_irqsave(&hvcsd->lock, flags);
- tty_port_get(&hvcsd->port);
hvcsd->port.count++;
hvcsd->todo_mask |= HVCS_SCHED_READ;
spin_unlock_irqrestore(&hvcsd->lock, flags);
-open_success:
hvcs_kick();
printk(KERN_INFO "HVCS: vty-server@%X connection opened.\n",
hvcsd->vdev->unit_address );
return 0;
-
-error_release:
- spin_unlock_irqrestore(&hvcsd->lock, flags);
- tty_port_put(&hvcsd->port);
-
- printk(KERN_WARNING "HVCS: partner connect failed.\n");
- return retval;
}
static void hvcs_close(struct tty_struct *tty, struct file *filp)
@@ -1236,7 +1245,6 @@ static void hvcs_close(struct tty_struct *tty, struct file *filp)
tty->driver_data = NULL;
free_irq(irq, hvcsd);
- tty_port_put(&hvcsd->port);
return;
} else if (hvcsd->port.count < 0) {
printk(KERN_ERR "HVCS: vty-server@%X open_count: %d"
@@ -1245,6 +1253,12 @@ static void hvcs_close(struct tty_struct *tty, struct file *filp)
}
spin_unlock_irqrestore(&hvcsd->lock, flags);
+}
+
+static void hvcs_cleanup(struct tty_struct * tty)
+{
+ struct hvcs_struct *hvcsd = tty->driver_data;
+
tty_port_put(&hvcsd->port);
}
@@ -1431,8 +1445,10 @@ static int hvcs_chars_in_buffer(struct tty_struct *tty)
}
static const struct tty_operations hvcs_ops = {
+ .install = hvcs_install,
.open = hvcs_open,
.close = hvcs_close,
+ .cleanup = hvcs_cleanup,
.hangup = hvcs_hangup,
.write = hvcs_write,
.write_room = hvcs_write_room,
diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c
index 6f5bc49c441..0083bc1f63f 100644
--- a/drivers/tty/hvc/hvsi.c
+++ b/drivers/tty/hvc/hvsi.c
@@ -1080,6 +1080,8 @@ static int __init hvsi_init(void)
struct hvsi_struct *hp = &hvsi_ports[i];
int ret = 1;
+ tty_port_link_device(&hp->port, hvsi_driver, i);
+
ret = request_irq(hp->virq, hvsi_interrupt, 0, "hvsi", hp);
if (ret)
printk(KERN_ERR "HVSI: couldn't reserve irq 0x%x (error %i)\n",
diff --git a/drivers/tty/hvc/hvsi_lib.c b/drivers/tty/hvc/hvsi_lib.c
index 59c135dd5d2..3396eb9d57a 100644
--- a/drivers/tty/hvc/hvsi_lib.c
+++ b/drivers/tty/hvc/hvsi_lib.c
@@ -400,7 +400,7 @@ void hvsilib_close(struct hvsi_priv *pv, struct hvc_struct *hp)
spin_unlock_irqrestore(&hp->lock, flags);
/* Clear our own DTR */
- if (!pv->tty || (pv->tty->termios->c_cflag & HUPCL))
+ if (!pv->tty || (pv->tty->termios.c_cflag & HUPCL))
hvsilib_write_mctrl(pv, 0);
/* Tear down the connection */
diff --git a/drivers/tty/ipwireless/tty.c b/drivers/tty/ipwireless/tty.c
index f8b5fa0093a..160f0ad9589 100644
--- a/drivers/tty/ipwireless/tty.c
+++ b/drivers/tty/ipwireless/tty.c
@@ -476,7 +476,7 @@ static int add_tty(int j,
mutex_init(&ttys[j]->ipw_tty_mutex);
tty_port_init(&ttys[j]->port);
- tty_register_device(ipw_tty_driver, j, NULL);
+ tty_port_register_device(&ttys[j]->port, ipw_tty_driver, j, NULL);
ipwireless_associate_network_tty(network, channel_idx, ttys[j]);
if (secondary_channel_idx != -1)
diff --git a/drivers/tty/isicom.c b/drivers/tty/isicom.c
index e1235accab7..d7492e18360 100644
--- a/drivers/tty/isicom.c
+++ b/drivers/tty/isicom.c
@@ -600,7 +600,7 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
port->status &= ~ISI_DCD;
}
- if (port->port.flags & ASYNC_CTS_FLOW) {
+ if (tty_port_cts_enabled(&port->port)) {
if (tty->hw_stopped) {
if (header & ISI_CTS) {
port->port.tty->hw_stopped = 0;
@@ -702,7 +702,7 @@ static void isicom_config_port(struct tty_struct *tty)
/* 1,2,3,4 => 57.6, 115.2, 230, 460 kbps resp. */
if (baud < 1 || baud > 4)
- tty->termios->c_cflag &= ~CBAUDEX;
+ tty->termios.c_cflag &= ~CBAUDEX;
else
baud += 15;
}
@@ -1196,8 +1196,8 @@ static void isicom_set_termios(struct tty_struct *tty,
if (isicom_paranoia_check(port, tty->name, "isicom_set_termios"))
return;
- if (tty->termios->c_cflag == old_termios->c_cflag &&
- tty->termios->c_iflag == old_termios->c_iflag)
+ if (tty->termios.c_cflag == old_termios->c_cflag &&
+ tty->termios.c_iflag == old_termios->c_iflag)
return;
spin_lock_irqsave(&port->card->card_lock, flags);
@@ -1205,7 +1205,7 @@ static void isicom_set_termios(struct tty_struct *tty,
spin_unlock_irqrestore(&port->card->card_lock, flags);
if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios->c_cflag & CRTSCTS)) {
+ !(tty->termios.c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
isicom_start(tty);
}
@@ -1611,7 +1611,8 @@ static int __devinit isicom_probe(struct pci_dev *pdev,
goto errunri;
for (index = 0; index < board->port_count; index++)
- tty_register_device(isicom_normal, board->index * 16 + index,
+ tty_port_register_device(&board->ports[index].port,
+ isicom_normal, board->index * 16 + index,
&pdev->dev);
return 0;
diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c
index 324467d28a5..56e616b9109 100644
--- a/drivers/tty/moxa.c
+++ b/drivers/tty/moxa.c
@@ -169,6 +169,7 @@ static DEFINE_SPINLOCK(moxa_lock);
static unsigned long baseaddr[MAX_BOARDS];
static unsigned int type[MAX_BOARDS];
static unsigned int numports[MAX_BOARDS];
+static struct tty_port moxa_service_port;
MODULE_AUTHOR("William Chen");
MODULE_DESCRIPTION("MOXA Intellio Family Multiport Board Device Driver");
@@ -367,10 +368,10 @@ static int moxa_ioctl(struct tty_struct *tty,
tmp.dcd = 1;
ttyp = tty_port_tty_get(&p->port);
- if (!ttyp || !ttyp->termios)
+ if (!ttyp)
tmp.cflag = p->cflag;
else
- tmp.cflag = ttyp->termios->c_cflag;
+ tmp.cflag = ttyp->termios.c_cflag;
tty_kref_put(ttyp);
copy:
if (copy_to_user(argm, &tmp, sizeof(tmp)))
@@ -834,7 +835,7 @@ static int moxa_init_board(struct moxa_board_conf *brd, struct device *dev)
const struct firmware *fw;
const char *file;
struct moxa_port *p;
- unsigned int i;
+ unsigned int i, first_idx;
int ret;
brd->ports = kcalloc(MAX_PORTS_PER_BOARD, sizeof(*brd->ports),
@@ -887,6 +888,11 @@ static int moxa_init_board(struct moxa_board_conf *brd, struct device *dev)
mod_timer(&moxaTimer, jiffies + HZ / 50);
spin_unlock_bh(&moxa_lock);
+ first_idx = (brd - moxa_boards) * MAX_PORTS_PER_BOARD;
+ for (i = 0; i < brd->numPorts; i++)
+ tty_port_register_device(&brd->ports[i].port, moxaDriver,
+ first_idx + i, dev);
+
return 0;
err_free:
kfree(brd->ports);
@@ -896,7 +902,7 @@ err:
static void moxa_board_deinit(struct moxa_board_conf *brd)
{
- unsigned int a, opened;
+ unsigned int a, opened, first_idx;
mutex_lock(&moxa_openlock);
spin_lock_bh(&moxa_lock);
@@ -925,6 +931,10 @@ static void moxa_board_deinit(struct moxa_board_conf *brd)
mutex_lock(&moxa_openlock);
}
+ first_idx = (brd - moxa_boards) * MAX_PORTS_PER_BOARD;
+ for (a = 0; a < brd->numPorts; a++)
+ tty_unregister_device(moxaDriver, first_idx + a);
+
iounmap(brd->basemem);
brd->basemem = NULL;
kfree(brd->ports);
@@ -967,6 +977,7 @@ static int __devinit moxa_pci_probe(struct pci_dev *pdev,
board->basemem = ioremap_nocache(pci_resource_start(pdev, 2), 0x4000);
if (board->basemem == NULL) {
dev_err(&pdev->dev, "can't remap io space 2\n");
+ retval = -ENOMEM;
goto err_reg;
}
@@ -1031,9 +1042,14 @@ static int __init moxa_init(void)
printk(KERN_INFO "MOXA Intellio family driver version %s\n",
MOXA_VERSION);
- moxaDriver = alloc_tty_driver(MAX_PORTS + 1);
- if (!moxaDriver)
- return -ENOMEM;
+
+ tty_port_init(&moxa_service_port);
+
+ moxaDriver = tty_alloc_driver(MAX_PORTS + 1,
+ TTY_DRIVER_REAL_RAW |
+ TTY_DRIVER_DYNAMIC_DEV);
+ if (IS_ERR(moxaDriver))
+ return PTR_ERR(moxaDriver);
moxaDriver->name = "ttyMX";
moxaDriver->major = ttymajor;
@@ -1044,8 +1060,9 @@ static int __init moxa_init(void)
moxaDriver->init_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
moxaDriver->init_termios.c_ispeed = 9600;
moxaDriver->init_termios.c_ospeed = 9600;
- moxaDriver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(moxaDriver, &moxa_ops);
+ /* Having one more port only for ioctls is ugly */
+ tty_port_link_device(&moxa_service_port, moxaDriver, MAX_PORTS);
if (tty_register_driver(moxaDriver)) {
printk(KERN_ERR "can't register MOXA Smartio tty driver!\n");
@@ -1178,7 +1195,7 @@ static int moxa_open(struct tty_struct *tty, struct file *filp)
mutex_lock(&ch->port.mutex);
if (!(ch->port.flags & ASYNC_INITIALIZED)) {
ch->statusflags = 0;
- moxa_set_tty_param(tty, tty->termios);
+ moxa_set_tty_param(tty, &tty->termios);
MoxaPortLineCtrl(ch, 1, 1);
MoxaPortEnable(ch);
MoxaSetFifo(ch, ch->type == PORT_16550A);
@@ -1193,7 +1210,7 @@ static int moxa_open(struct tty_struct *tty, struct file *filp)
static void moxa_close(struct tty_struct *tty, struct file *filp)
{
struct moxa_port *ch = tty->driver_data;
- ch->cflag = tty->termios->c_cflag;
+ ch->cflag = tty->termios.c_cflag;
tty_port_close(&ch->port, tty, filp);
}
@@ -1464,7 +1481,7 @@ static void moxa_poll(unsigned long ignored)
static void moxa_set_tty_param(struct tty_struct *tty, struct ktermios *old_termios)
{
- register struct ktermios *ts = tty->termios;
+ register struct ktermios *ts = &tty->termios;
struct moxa_port *ch = tty->driver_data;
int rts, cts, txflow, rxflow, xany, baud;
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index 90cc680c4f0..cfda47dabd2 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -643,7 +643,7 @@ static int mxser_change_speed(struct tty_struct *tty,
int ret = 0;
unsigned char status;
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
if (!info->ioaddr)
return ret;
@@ -830,7 +830,7 @@ static void mxser_check_modem_status(struct tty_struct *tty,
wake_up_interruptible(&port->port.open_wait);
}
- if (port->port.flags & ASYNC_CTS_FLOW) {
+ if (tty_port_cts_enabled(&port->port)) {
if (tty->hw_stopped) {
if (status & UART_MSR_CTS) {
tty->hw_stopped = 0;
@@ -1520,10 +1520,10 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
tty = tty_port_tty_get(port);
- if (!tty || !tty->termios)
+ if (!tty)
ms.cflag = ip->normal_termios.c_cflag;
else
- ms.cflag = tty->termios->c_cflag;
+ ms.cflag = tty->termios.c_cflag;
tty_kref_put(tty);
spin_lock_irq(&ip->slock);
status = inb(ip->ioaddr + UART_MSR);
@@ -1589,13 +1589,13 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
tty = tty_port_tty_get(&ip->port);
- if (!tty || !tty->termios) {
+ if (!tty) {
cflag = ip->normal_termios.c_cflag;
iflag = ip->normal_termios.c_iflag;
me->baudrate[p] = tty_termios_baud_rate(&ip->normal_termios);
} else {
- cflag = tty->termios->c_cflag;
- iflag = tty->termios->c_iflag;
+ cflag = tty->termios.c_cflag;
+ iflag = tty->termios.c_iflag;
me->baudrate[p] = tty_get_baud_rate(tty);
}
tty_kref_put(tty);
@@ -1853,7 +1853,7 @@ static void mxser_stoprx(struct tty_struct *tty)
}
}
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
info->MCR &= ~UART_MCR_RTS;
outb(info->MCR, info->ioaddr + UART_MCR);
}
@@ -1890,7 +1890,7 @@ static void mxser_unthrottle(struct tty_struct *tty)
}
}
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
info->MCR |= UART_MCR_RTS;
outb(info->MCR, info->ioaddr + UART_MCR);
}
@@ -1939,14 +1939,14 @@ static void mxser_set_termios(struct tty_struct *tty, struct ktermios *old_termi
spin_unlock_irqrestore(&info->slock, flags);
if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios->c_cflag & CRTSCTS)) {
+ !(tty->termios.c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
mxser_start(tty);
}
/* Handle sw stopped */
if ((old_termios->c_iflag & IXON) &&
- !(tty->termios->c_iflag & IXON)) {
+ !(tty->termios.c_iflag & IXON)) {
tty->stopped = 0;
if (info->board->chip_flag) {
@@ -2337,11 +2337,36 @@ static struct tty_port_operations mxser_port_ops = {
* The MOXA Smartio/Industio serial driver boot-time initialization code!
*/
+static bool allow_overlapping_vector;
+module_param(allow_overlapping_vector, bool, S_IRUGO);
+MODULE_PARM_DESC(allow_overlapping_vector, "whether we allow ISA cards to be configured such that vector overlabs IO ports (default=no)");
+
+static bool mxser_overlapping_vector(struct mxser_board *brd)
+{
+ return allow_overlapping_vector &&
+ brd->vector >= brd->ports[0].ioaddr &&
+ brd->vector < brd->ports[0].ioaddr + 8 * brd->info->nports;
+}
+
+static int mxser_request_vector(struct mxser_board *brd)
+{
+ if (mxser_overlapping_vector(brd))
+ return 0;
+ return request_region(brd->vector, 1, "mxser(vector)") ? 0 : -EIO;
+}
+
+static void mxser_release_vector(struct mxser_board *brd)
+{
+ if (mxser_overlapping_vector(brd))
+ return;
+ release_region(brd->vector, 1);
+}
+
static void mxser_release_ISA_res(struct mxser_board *brd)
{
free_irq(brd->irq, brd);
release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
- release_region(brd->vector, 1);
+ mxser_release_vector(brd);
}
static int __devinit mxser_initbrd(struct mxser_board *brd,
@@ -2396,7 +2421,7 @@ static int __devinit mxser_initbrd(struct mxser_board *brd,
static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd)
{
- int id, i, bits;
+ int id, i, bits, ret;
unsigned short regs[16], irq;
unsigned char scratch, scratch2;
@@ -2492,13 +2517,15 @@ static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd)
8 * brd->info->nports - 1);
return -EIO;
}
- if (!request_region(brd->vector, 1, "mxser(vector)")) {
+
+ ret = mxser_request_vector(brd);
+ if (ret) {
release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
printk(KERN_ERR "mxser: can't request interrupt vector region: "
"0x%.8lx-0x%.8lx\n",
brd->ports[0].ioaddr, brd->ports[0].ioaddr +
8 * brd->info->nports - 1);
- return -EIO;
+ return ret;
}
return brd->info->nports;
@@ -2598,7 +2625,8 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
goto err_rel3;
for (i = 0; i < brd->info->nports; i++)
- tty_register_device(mxvar_sdriver, brd->idx + i, &pdev->dev);
+ tty_port_register_device(&brd->ports[i].port, mxvar_sdriver,
+ brd->idx + i, &pdev->dev);
pci_set_drvdata(pdev, brd);
@@ -2695,7 +2723,8 @@ static int __init mxser_module_init(void)
brd->idx = m * MXSER_PORTS_PER_BOARD;
for (i = 0; i < brd->info->nports; i++)
- tty_register_device(mxvar_sdriver, brd->idx + i, NULL);
+ tty_port_register_device(&brd->ports[i].port,
+ mxvar_sdriver, brd->idx + i, NULL);
m++;
}
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index c43b683b6eb..3e210a430fb 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -108,7 +108,7 @@ struct gsm_mux_net {
*/
struct gsm_msg {
- struct gsm_msg *next;
+ struct list_head list;
u8 addr; /* DLCI address + flags */
u8 ctrl; /* Control byte + flags */
unsigned int len; /* Length of data block (can be zero) */
@@ -245,8 +245,7 @@ struct gsm_mux {
unsigned int tx_bytes; /* TX data outstanding */
#define TX_THRESH_HI 8192
#define TX_THRESH_LO 2048
- struct gsm_msg *tx_head; /* Pending data packets */
- struct gsm_msg *tx_tail;
+ struct list_head tx_list; /* Pending data packets */
/* Control messages */
struct timer_list t2_timer; /* Retransmit timer for commands */
@@ -663,7 +662,7 @@ static struct gsm_msg *gsm_data_alloc(struct gsm_mux *gsm, u8 addr, int len,
m->len = len;
m->addr = addr;
m->ctrl = ctrl;
- m->next = NULL;
+ INIT_LIST_HEAD(&m->list);
return m;
}
@@ -673,22 +672,21 @@ static struct gsm_msg *gsm_data_alloc(struct gsm_mux *gsm, u8 addr, int len,
*
* The tty device has called us to indicate that room has appeared in
* the transmit queue. Ram more data into the pipe if we have any
+ * If we have been flow-stopped by a CMD_FCOFF, then we can only
+ * send messages on DLCI0 until CMD_FCON
*
* FIXME: lock against link layer control transmissions
*/
static void gsm_data_kick(struct gsm_mux *gsm)
{
- struct gsm_msg *msg = gsm->tx_head;
+ struct gsm_msg *msg, *nmsg;
int len;
int skip_sof = 0;
- /* FIXME: We need to apply this solely to data messages */
- if (gsm->constipated)
- return;
-
- while (gsm->tx_head != NULL) {
- msg = gsm->tx_head;
+ list_for_each_entry_safe(msg, nmsg, &gsm->tx_list, list) {
+ if (gsm->constipated && msg->addr)
+ continue;
if (gsm->encoding != 0) {
gsm->txframe[0] = GSM1_SOF;
len = gsm_stuff_frame(msg->data,
@@ -711,14 +709,13 @@ static void gsm_data_kick(struct gsm_mux *gsm)
len - skip_sof) < 0)
break;
/* FIXME: Can eliminate one SOF in many more cases */
- gsm->tx_head = msg->next;
- if (gsm->tx_head == NULL)
- gsm->tx_tail = NULL;
gsm->tx_bytes -= msg->len;
- kfree(msg);
/* For a burst of frames skip the extra SOF within the
burst */
skip_sof = 1;
+
+ list_del(&msg->list);
+ kfree(msg);
}
}
@@ -768,11 +765,7 @@ static void __gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg)
msg->data = dp;
/* Add to the actual output queue */
- if (gsm->tx_tail)
- gsm->tx_tail->next = msg;
- else
- gsm->tx_head = msg;
- gsm->tx_tail = msg;
+ list_add_tail(&msg->list, &gsm->tx_list);
gsm->tx_bytes += msg->len;
gsm_data_kick(gsm);
}
@@ -875,7 +868,7 @@ static int gsm_dlci_data_output_framed(struct gsm_mux *gsm,
/* dlci->skb is locked by tx_lock */
if (dlci->skb == NULL) {
- dlci->skb = skb_dequeue(&dlci->skb_list);
+ dlci->skb = skb_dequeue_tail(&dlci->skb_list);
if (dlci->skb == NULL)
return 0;
first = 1;
@@ -886,7 +879,7 @@ static int gsm_dlci_data_output_framed(struct gsm_mux *gsm,
if (len > gsm->mtu) {
if (dlci->adaption == 3) {
/* Over long frame, bin it */
- kfree_skb(dlci->skb);
+ dev_kfree_skb_any(dlci->skb);
dlci->skb = NULL;
return 0;
}
@@ -899,8 +892,11 @@ static int gsm_dlci_data_output_framed(struct gsm_mux *gsm,
/* FIXME: need a timer or something to kick this so it can't
get stuck with no work outstanding and no buffer free */
- if (msg == NULL)
+ if (msg == NULL) {
+ skb_queue_tail(&dlci->skb_list, dlci->skb);
+ dlci->skb = NULL;
return -ENOMEM;
+ }
dp = msg->data;
if (dlci->adaption == 4) { /* Interruptible framed (Packetised Data) */
@@ -912,7 +908,7 @@ static int gsm_dlci_data_output_framed(struct gsm_mux *gsm,
skb_pull(dlci->skb, len);
__gsm_data_queue(dlci, msg);
if (last) {
- kfree_skb(dlci->skb);
+ dev_kfree_skb_any(dlci->skb);
dlci->skb = NULL;
}
return size;
@@ -971,16 +967,22 @@ static void gsm_dlci_data_sweep(struct gsm_mux *gsm)
static void gsm_dlci_data_kick(struct gsm_dlci *dlci)
{
unsigned long flags;
+ int sweep;
+
+ if (dlci->constipated)
+ return;
spin_lock_irqsave(&dlci->gsm->tx_lock, flags);
/* If we have nothing running then we need to fire up */
+ sweep = (dlci->gsm->tx_bytes < TX_THRESH_LO);
if (dlci->gsm->tx_bytes == 0) {
if (dlci->net)
gsm_dlci_data_output_framed(dlci->gsm, dlci);
else
gsm_dlci_data_output(dlci->gsm, dlci);
- } else if (dlci->gsm->tx_bytes < TX_THRESH_LO)
- gsm_dlci_data_sweep(dlci->gsm);
+ }
+ if (sweep)
+ gsm_dlci_data_sweep(dlci->gsm);
spin_unlock_irqrestore(&dlci->gsm->tx_lock, flags);
}
@@ -1027,6 +1029,7 @@ static void gsm_process_modem(struct tty_struct *tty, struct gsm_dlci *dlci,
{
int mlines = 0;
u8 brk = 0;
+ int fc;
/* The modem status command can either contain one octet (v.24 signals)
or two octets (v.24 signals + break signals). The length field will
@@ -1038,19 +1041,21 @@ static void gsm_process_modem(struct tty_struct *tty, struct gsm_dlci *dlci,
else {
brk = modem & 0x7f;
modem = (modem >> 7) & 0x7f;
- };
+ }
/* Flow control/ready to communicate */
- if (modem & MDM_FC) {
+ fc = (modem & MDM_FC) || !(modem & MDM_RTR);
+ if (fc && !dlci->constipated) {
/* Need to throttle our output on this device */
dlci->constipated = 1;
- }
- if (modem & MDM_RTC) {
- mlines |= TIOCM_DSR | TIOCM_DTR;
+ } else if (!fc && dlci->constipated) {
dlci->constipated = 0;
gsm_dlci_data_kick(dlci);
}
+
/* Map modem bits */
+ if (modem & MDM_RTC)
+ mlines |= TIOCM_DSR | TIOCM_DTR;
if (modem & MDM_RTR)
mlines |= TIOCM_RTS | TIOCM_CTS;
if (modem & MDM_IC)
@@ -1061,7 +1066,7 @@ static void gsm_process_modem(struct tty_struct *tty, struct gsm_dlci *dlci,
/* Carrier drop -> hangup */
if (tty) {
if ((mlines & TIOCM_CD) == 0 && (dlci->modem_rx & TIOCM_CD))
- if (!(tty->termios->c_cflag & CLOCAL))
+ if (!(tty->termios.c_cflag & CLOCAL))
tty_hangup(tty);
if (brk & 0x01)
tty_insert_flip_char(tty, 0, TTY_BREAK);
@@ -1190,6 +1195,8 @@ static void gsm_control_message(struct gsm_mux *gsm, unsigned int command,
u8 *data, int clen)
{
u8 buf[1];
+ unsigned long flags;
+
switch (command) {
case CMD_CLD: {
struct gsm_dlci *dlci = gsm->dlci[0];
@@ -1206,16 +1213,18 @@ static void gsm_control_message(struct gsm_mux *gsm, unsigned int command,
gsm_control_reply(gsm, CMD_TEST, data, clen);
break;
case CMD_FCON:
- /* Modem wants us to STFU */
- gsm->constipated = 1;
- gsm_control_reply(gsm, CMD_FCON, NULL, 0);
- break;
- case CMD_FCOFF:
/* Modem can accept data again */
gsm->constipated = 0;
- gsm_control_reply(gsm, CMD_FCOFF, NULL, 0);
+ gsm_control_reply(gsm, CMD_FCON, NULL, 0);
/* Kick the link in case it is idling */
+ spin_lock_irqsave(&gsm->tx_lock, flags);
gsm_data_kick(gsm);
+ spin_unlock_irqrestore(&gsm->tx_lock, flags);
+ break;
+ case CMD_FCOFF:
+ /* Modem wants us to STFU */
+ gsm->constipated = 1;
+ gsm_control_reply(gsm, CMD_FCOFF, NULL, 0);
break;
case CMD_MSC:
/* Out of band modem line change indicator for a DLCI */
@@ -1668,7 +1677,7 @@ static void gsm_dlci_free(struct kref *ref)
dlci->gsm->dlci[dlci->addr] = NULL;
kfifo_free(dlci->fifo);
while ((dlci->skb = skb_dequeue(&dlci->skb_list)))
- kfree_skb(dlci->skb);
+ dev_kfree_skb(dlci->skb);
kfree(dlci);
}
@@ -2007,7 +2016,7 @@ void gsm_cleanup_mux(struct gsm_mux *gsm)
{
int i;
struct gsm_dlci *dlci = gsm->dlci[0];
- struct gsm_msg *txq;
+ struct gsm_msg *txq, *ntxq;
struct gsm_control *gc;
gsm->dead = 1;
@@ -2042,11 +2051,9 @@ void gsm_cleanup_mux(struct gsm_mux *gsm)
if (gsm->dlci[i])
gsm_dlci_release(gsm->dlci[i]);
/* Now wipe the queues */
- for (txq = gsm->tx_head; txq != NULL; txq = gsm->tx_head) {
- gsm->tx_head = txq->next;
+ list_for_each_entry_safe(txq, ntxq, &gsm->tx_list, list)
kfree(txq);
- }
- gsm->tx_tail = NULL;
+ INIT_LIST_HEAD(&gsm->tx_list);
}
EXPORT_SYMBOL_GPL(gsm_cleanup_mux);
@@ -2157,6 +2164,7 @@ struct gsm_mux *gsm_alloc_mux(void)
}
spin_lock_init(&gsm->lock);
kref_init(&gsm->ref);
+ INIT_LIST_HEAD(&gsm->tx_list);
gsm->t1 = T1;
gsm->t2 = T2;
@@ -2273,7 +2281,7 @@ static void gsmld_receive_buf(struct tty_struct *tty, const unsigned char *cp,
gsm->error(gsm, *dp, flags);
break;
default:
- WARN_ONCE("%s: unknown flag %d\n",
+ WARN_ONCE(1, "%s: unknown flag %d\n",
tty_name(tty, buf), flags);
break;
}
@@ -2377,12 +2385,12 @@ static void gsmld_write_wakeup(struct tty_struct *tty)
/* Queue poll */
clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
+ spin_lock_irqsave(&gsm->tx_lock, flags);
gsm_data_kick(gsm);
if (gsm->tx_bytes < TX_THRESH_LO) {
- spin_lock_irqsave(&gsm->tx_lock, flags);
gsm_dlci_data_sweep(gsm);
- spin_unlock_irqrestore(&gsm->tx_lock, flags);
}
+ spin_unlock_irqrestore(&gsm->tx_lock, flags);
}
/**
@@ -2868,14 +2876,14 @@ static const struct tty_port_operations gsm_port_ops = {
.dtr_rts = gsm_dtr_rts,
};
-
-static int gsmtty_open(struct tty_struct *tty, struct file *filp)
+static int gsmtty_install(struct tty_driver *driver, struct tty_struct *tty)
{
struct gsm_mux *gsm;
struct gsm_dlci *dlci;
- struct tty_port *port;
unsigned int line = tty->index;
unsigned int mux = line >> 6;
+ bool alloc = false;
+ int ret;
line = line & 0x3F;
@@ -2889,14 +2897,35 @@ static int gsmtty_open(struct tty_struct *tty, struct file *filp)
gsm = gsm_mux[mux];
if (gsm->dead)
return -EL2HLT;
+ /* If DLCI 0 is not yet fully open return an error. This is ok from a locking
+ perspective as we don't have to worry about this if DLCI0 is lost */
+ if (gsm->dlci[0] && gsm->dlci[0]->state != DLCI_OPEN)
+ return -EL2NSYNC;
dlci = gsm->dlci[line];
- if (dlci == NULL)
+ if (dlci == NULL) {
+ alloc = true;
dlci = gsm_dlci_alloc(gsm, line);
+ }
if (dlci == NULL)
return -ENOMEM;
- port = &dlci->port;
- port->count++;
+ ret = tty_port_install(&dlci->port, driver, tty);
+ if (ret) {
+ if (alloc)
+ dlci_put(dlci);
+ return ret;
+ }
+
tty->driver_data = dlci;
+
+ return 0;
+}
+
+static int gsmtty_open(struct tty_struct *tty, struct file *filp)
+{
+ struct gsm_dlci *dlci = tty->driver_data;
+ struct tty_port *port = &dlci->port;
+
+ port->count++;
dlci_get(dlci);
dlci_get(dlci->gsm->dlci[0]);
mux_get(dlci->gsm);
@@ -3043,13 +3072,13 @@ static void gsmtty_set_termios(struct tty_struct *tty, struct ktermios *old)
the RPN control message. This however rapidly gets nasty as we
then have to remap modem signals each way according to whether
our virtual cable is null modem etc .. */
- tty_termios_copy_hw(tty->termios, old);
+ tty_termios_copy_hw(&tty->termios, old);
}
static void gsmtty_throttle(struct tty_struct *tty)
{
struct gsm_dlci *dlci = tty->driver_data;
- if (tty->termios->c_cflag & CRTSCTS)
+ if (tty->termios.c_cflag & CRTSCTS)
dlci->modem_tx &= ~TIOCM_DTR;
dlci->throttled = 1;
/* Send an MSC with DTR cleared */
@@ -3059,7 +3088,7 @@ static void gsmtty_throttle(struct tty_struct *tty)
static void gsmtty_unthrottle(struct tty_struct *tty)
{
struct gsm_dlci *dlci = tty->driver_data;
- if (tty->termios->c_cflag & CRTSCTS)
+ if (tty->termios.c_cflag & CRTSCTS)
dlci->modem_tx |= TIOCM_DTR;
dlci->throttled = 0;
/* Send an MSC with DTR set */
@@ -3085,6 +3114,7 @@ static int gsmtty_break_ctl(struct tty_struct *tty, int state)
/* Virtual ttys for the demux */
static const struct tty_operations gsmtty_ops = {
+ .install = gsmtty_install,
.open = gsmtty_open,
.close = gsmtty_close,
.write = gsmtty_write,
diff --git a/drivers/tty/n_r3964.c b/drivers/tty/n_r3964.c
index 5c6c31459a2..1e6405070ce 100644
--- a/drivers/tty/n_r3964.c
+++ b/drivers/tty/n_r3964.c
@@ -1065,7 +1065,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file,
TRACE_L("read()");
- tty_lock();
+ tty_lock(tty);
pClient = findClient(pInfo, task_pid(current));
if (pClient) {
@@ -1077,7 +1077,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file,
goto unlock;
}
/* block until there is a message: */
- wait_event_interruptible_tty(pInfo->read_wait,
+ wait_event_interruptible_tty(tty, pInfo->read_wait,
(pMsg = remove_msg(pInfo, pClient)));
}
@@ -1107,7 +1107,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file,
}
ret = -EPERM;
unlock:
- tty_unlock();
+ tty_unlock(tty);
return ret;
}
@@ -1156,7 +1156,7 @@ static ssize_t r3964_write(struct tty_struct *tty, struct file *file,
pHeader->locks = 0;
pHeader->owner = NULL;
- tty_lock();
+ tty_lock(tty);
pClient = findClient(pInfo, task_pid(current));
if (pClient) {
@@ -1175,7 +1175,7 @@ static ssize_t r3964_write(struct tty_struct *tty, struct file *file,
add_tx_queue(pInfo, pHeader);
trigger_transmit(pInfo);
- tty_unlock();
+ tty_unlock(tty);
return 0;
}
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index ee1c268f5f9..8c0b7b42319 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -92,10 +92,18 @@ static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
static void n_tty_set_room(struct tty_struct *tty)
{
- /* tty->read_cnt is not read locked ? */
- int left = N_TTY_BUF_SIZE - tty->read_cnt - 1;
+ int left;
int old_left;
+ /* tty->read_cnt is not read locked ? */
+ if (I_PARMRK(tty)) {
+ /* Multiply read_cnt by 3, since each byte might take up to
+ * three times as many spaces when PARMRK is set (depending on
+ * its flags, e.g. parity error). */
+ left = N_TTY_BUF_SIZE - tty->read_cnt * 3 - 1;
+ } else
+ left = N_TTY_BUF_SIZE - tty->read_cnt - 1;
+
/*
* If we are doing input canonicalization, and there are no
* pending newlines, let characters through without limit, so
@@ -1432,6 +1440,12 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
*/
if (tty->receive_room < TTY_THRESHOLD_THROTTLE)
tty_throttle(tty);
+
+ /* FIXME: there is a tiny race here if the receive room check runs
+ before the other work executes and empties the buffer (upping
+ the receiving room and unthrottling. We then throttle and get
+ stuck. This has been observed and traced down by Vincent Pillet/
+ We need to address this when we sort out out the rx path locking */
}
int is_ignored(int sig)
@@ -1460,7 +1474,7 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
BUG_ON(!tty);
if (old)
- canon_change = (old->c_lflag ^ tty->termios->c_lflag) & ICANON;
+ canon_change = (old->c_lflag ^ tty->termios.c_lflag) & ICANON;
if (canon_change) {
memset(&tty->read_flags, 0, sizeof tty->read_flags);
tty->canon_head = tty->read_tail;
@@ -1728,7 +1742,8 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
do_it_again:
- BUG_ON(!tty->read_buf);
+ if (WARN_ON(!tty->read_buf))
+ return -EAGAIN;
c = job_control(tty, file);
if (c < 0)
@@ -1832,13 +1847,13 @@ do_it_again:
if (tty->icanon && !L_EXTPROC(tty)) {
/* N.B. avoid overrun if nr == 0 */
+ spin_lock_irqsave(&tty->read_lock, flags);
while (nr && tty->read_cnt) {
int eol;
eol = test_and_clear_bit(tty->read_tail,
tty->read_flags);
c = tty->read_buf[tty->read_tail];
- spin_lock_irqsave(&tty->read_lock, flags);
tty->read_tail = ((tty->read_tail+1) &
(N_TTY_BUF_SIZE-1));
tty->read_cnt--;
@@ -1856,15 +1871,19 @@ do_it_again:
if (tty_put_user(tty, c, b++)) {
retval = -EFAULT;
b--;
+ spin_lock_irqsave(&tty->read_lock, flags);
break;
}
nr--;
}
if (eol) {
tty_audit_push(tty);
+ spin_lock_irqsave(&tty->read_lock, flags);
break;
}
+ spin_lock_irqsave(&tty->read_lock, flags);
}
+ spin_unlock_irqrestore(&tty->read_lock, flags);
if (retval)
break;
} else {
diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c
index e7592f9037d..b917c942495 100644
--- a/drivers/tty/nozomi.c
+++ b/drivers/tty/nozomi.c
@@ -1473,8 +1473,8 @@ static int __devinit nozomi_card_init(struct pci_dev *pdev,
port->dc = dc;
tty_port_init(&port->port);
port->port.ops = &noz_tty_port_ops;
- tty_dev = tty_register_device(ntty_driver, dc->index_start + i,
- &pdev->dev);
+ tty_dev = tty_port_register_device(&port->port, ntty_driver,
+ dc->index_start + i, &pdev->dev);
if (IS_ERR(tty_dev)) {
ret = PTR_ERR(tty_dev);
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 5505ffc91da..2bace847eb3 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -47,6 +47,7 @@ static void pty_close(struct tty_struct *tty, struct file *filp)
wake_up_interruptible(&tty->read_wait);
wake_up_interruptible(&tty->write_wait);
tty->packet = 0;
+ /* Review - krefs on tty_link ?? */
if (!tty->link)
return;
tty->link->packet = 0;
@@ -62,9 +63,9 @@ static void pty_close(struct tty_struct *tty, struct file *filp)
mutex_unlock(&devpts_mutex);
}
#endif
- tty_unlock();
+ tty_unlock(tty);
tty_vhangup(tty->link);
- tty_lock();
+ tty_lock(tty);
}
}
@@ -231,8 +232,8 @@ out:
static void pty_set_termios(struct tty_struct *tty,
struct ktermios *old_termios)
{
- tty->termios->c_cflag &= ~(CSIZE | PARENB);
- tty->termios->c_cflag |= (CS8 | CREAD);
+ tty->termios.c_cflag &= ~(CSIZE | PARENB);
+ tty->termios.c_cflag |= (CS8 | CREAD);
}
/**
@@ -282,60 +283,110 @@ done:
return 0;
}
-/* Traditional BSD devices */
-#ifdef CONFIG_LEGACY_PTYS
-
-static int pty_install(struct tty_driver *driver, struct tty_struct *tty)
+/**
+ * pty_common_install - set up the pty pair
+ * @driver: the pty driver
+ * @tty: the tty being instantiated
+ * @bool: legacy, true if this is BSD style
+ *
+ * Perform the initial set up for the tty/pty pair. Called from the
+ * tty layer when the port is first opened.
+ *
+ * Locking: the caller must hold the tty_mutex
+ */
+static int pty_common_install(struct tty_driver *driver, struct tty_struct *tty,
+ bool legacy)
{
struct tty_struct *o_tty;
+ struct tty_port *ports[2];
int idx = tty->index;
- int retval;
+ int retval = -ENOMEM;
o_tty = alloc_tty_struct();
if (!o_tty)
- return -ENOMEM;
+ goto err;
+ ports[0] = kmalloc(sizeof **ports, GFP_KERNEL);
+ ports[1] = kmalloc(sizeof **ports, GFP_KERNEL);
+ if (!ports[0] || !ports[1])
+ goto err_free_tty;
if (!try_module_get(driver->other->owner)) {
/* This cannot in fact currently happen */
- retval = -ENOMEM;
goto err_free_tty;
}
initialize_tty_struct(o_tty, driver->other, idx);
- /* We always use new tty termios data so we can do this
- the easy way .. */
- retval = tty_init_termios(tty);
- if (retval)
- goto err_deinit_tty;
-
- retval = tty_init_termios(o_tty);
- if (retval)
- goto err_free_termios;
+ if (legacy) {
+ /* We always use new tty termios data so we can do this
+ the easy way .. */
+ retval = tty_init_termios(tty);
+ if (retval)
+ goto err_deinit_tty;
+
+ retval = tty_init_termios(o_tty);
+ if (retval)
+ goto err_free_termios;
+
+ driver->other->ttys[idx] = o_tty;
+ driver->ttys[idx] = tty;
+ } else {
+ memset(&tty->termios_locked, 0, sizeof(tty->termios_locked));
+ tty->termios = driver->init_termios;
+ memset(&o_tty->termios_locked, 0, sizeof(tty->termios_locked));
+ o_tty->termios = driver->other->init_termios;
+ }
/*
* Everything allocated ... set up the o_tty structure.
*/
- driver->other->ttys[idx] = o_tty;
tty_driver_kref_get(driver->other);
if (driver->subtype == PTY_TYPE_MASTER)
o_tty->count++;
/* Establish the links in both directions */
tty->link = o_tty;
o_tty->link = tty;
+ tty_port_init(ports[0]);
+ tty_port_init(ports[1]);
+ o_tty->port = ports[0];
+ tty->port = ports[1];
tty_driver_kref_get(driver);
tty->count++;
- driver->ttys[idx] = tty;
return 0;
err_free_termios:
- tty_free_termios(tty);
+ if (legacy)
+ tty_free_termios(tty);
err_deinit_tty:
deinitialize_tty_struct(o_tty);
module_put(o_tty->driver->owner);
err_free_tty:
+ kfree(ports[0]);
+ kfree(ports[1]);
free_tty_struct(o_tty);
+err:
return retval;
}
+static void pty_cleanup(struct tty_struct *tty)
+{
+ kfree(tty->port);
+}
+
+/* Traditional BSD devices */
+#ifdef CONFIG_LEGACY_PTYS
+
+static int pty_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+ return pty_common_install(driver, tty, true);
+}
+
+static void pty_remove(struct tty_driver *driver, struct tty_struct *tty)
+{
+ struct tty_struct *pair = tty->link;
+ driver->ttys[tty->index] = NULL;
+ if (pair)
+ pair->driver->ttys[pair->index] = NULL;
+}
+
static int pty_bsd_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
@@ -366,7 +417,9 @@ static const struct tty_operations master_pty_ops_bsd = {
.unthrottle = pty_unthrottle,
.set_termios = pty_set_termios,
.ioctl = pty_bsd_ioctl,
- .resize = pty_resize
+ .cleanup = pty_cleanup,
+ .resize = pty_resize,
+ .remove = pty_remove
};
static const struct tty_operations slave_pty_ops_bsd = {
@@ -379,7 +432,9 @@ static const struct tty_operations slave_pty_ops_bsd = {
.chars_in_buffer = pty_chars_in_buffer,
.unthrottle = pty_unthrottle,
.set_termios = pty_set_termios,
- .resize = pty_resize
+ .cleanup = pty_cleanup,
+ .resize = pty_resize,
+ .remove = pty_remove
};
static void __init legacy_pty_init(void)
@@ -389,12 +444,18 @@ static void __init legacy_pty_init(void)
if (legacy_count <= 0)
return;
- pty_driver = alloc_tty_driver(legacy_count);
- if (!pty_driver)
+ pty_driver = tty_alloc_driver(legacy_count,
+ TTY_DRIVER_RESET_TERMIOS |
+ TTY_DRIVER_REAL_RAW |
+ TTY_DRIVER_DYNAMIC_ALLOC);
+ if (IS_ERR(pty_driver))
panic("Couldn't allocate pty driver");
- pty_slave_driver = alloc_tty_driver(legacy_count);
- if (!pty_slave_driver)
+ pty_slave_driver = tty_alloc_driver(legacy_count,
+ TTY_DRIVER_RESET_TERMIOS |
+ TTY_DRIVER_REAL_RAW |
+ TTY_DRIVER_DYNAMIC_ALLOC);
+ if (IS_ERR(pty_slave_driver))
panic("Couldn't allocate pty slave driver");
pty_driver->driver_name = "pty_master";
@@ -410,7 +471,6 @@ static void __init legacy_pty_init(void)
pty_driver->init_termios.c_lflag = 0;
pty_driver->init_termios.c_ispeed = 38400;
pty_driver->init_termios.c_ospeed = 38400;
- pty_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW;
pty_driver->other = pty_slave_driver;
tty_set_operations(pty_driver, &master_pty_ops_bsd);
@@ -424,8 +484,6 @@ static void __init legacy_pty_init(void)
pty_slave_driver->init_termios.c_cflag = B38400 | CS8 | CREAD;
pty_slave_driver->init_termios.c_ispeed = 38400;
pty_slave_driver->init_termios.c_ospeed = 38400;
- pty_slave_driver->flags = TTY_DRIVER_RESET_TERMIOS |
- TTY_DRIVER_REAL_RAW;
pty_slave_driver->other = pty_driver;
tty_set_operations(pty_slave_driver, &slave_pty_ops_bsd);
@@ -497,78 +555,22 @@ static struct tty_struct *pts_unix98_lookup(struct tty_driver *driver,
return tty;
}
-static void pty_unix98_shutdown(struct tty_struct *tty)
-{
- tty_driver_remove_tty(tty->driver, tty);
- /* We have our own method as we don't use the tty index */
- kfree(tty->termios);
-}
-
/* We have no need to install and remove our tty objects as devpts does all
the work for us */
static int pty_unix98_install(struct tty_driver *driver, struct tty_struct *tty)
{
- struct tty_struct *o_tty;
- int idx = tty->index;
-
- o_tty = alloc_tty_struct();
- if (!o_tty)
- return -ENOMEM;
- if (!try_module_get(driver->other->owner)) {
- /* This cannot in fact currently happen */
- goto err_free_tty;
- }
- initialize_tty_struct(o_tty, driver->other, idx);
-
- tty->termios = kzalloc(sizeof(struct ktermios[2]), GFP_KERNEL);
- if (tty->termios == NULL)
- goto err_free_mem;
- *tty->termios = driver->init_termios;
- tty->termios_locked = tty->termios + 1;
-
- o_tty->termios = kzalloc(sizeof(struct ktermios[2]), GFP_KERNEL);
- if (o_tty->termios == NULL)
- goto err_free_mem;
- *o_tty->termios = driver->other->init_termios;
- o_tty->termios_locked = o_tty->termios + 1;
-
- tty_driver_kref_get(driver->other);
- if (driver->subtype == PTY_TYPE_MASTER)
- o_tty->count++;
- /* Establish the links in both directions */
- tty->link = o_tty;
- o_tty->link = tty;
- /*
- * All structures have been allocated, so now we install them.
- * Failures after this point use release_tty to clean up, so
- * there's no need to null out the local pointers.
- */
- tty_driver_kref_get(driver);
- tty->count++;
- return 0;
-err_free_mem:
- deinitialize_tty_struct(o_tty);
- kfree(o_tty->termios);
- kfree(tty->termios);
- module_put(o_tty->driver->owner);
-err_free_tty:
- free_tty_struct(o_tty);
- return -ENOMEM;
-}
-
-static void ptm_unix98_remove(struct tty_driver *driver, struct tty_struct *tty)
-{
+ return pty_common_install(driver, tty, false);
}
-static void pts_unix98_remove(struct tty_driver *driver, struct tty_struct *tty)
+static void pty_unix98_remove(struct tty_driver *driver, struct tty_struct *tty)
{
}
static const struct tty_operations ptm_unix98_ops = {
.lookup = ptm_unix98_lookup,
.install = pty_unix98_install,
- .remove = ptm_unix98_remove,
+ .remove = pty_unix98_remove,
.open = pty_open,
.close = pty_close,
.write = pty_write,
@@ -578,14 +580,14 @@ static const struct tty_operations ptm_unix98_ops = {
.unthrottle = pty_unthrottle,
.set_termios = pty_set_termios,
.ioctl = pty_unix98_ioctl,
- .shutdown = pty_unix98_shutdown,
- .resize = pty_resize
+ .resize = pty_resize,
+ .cleanup = pty_cleanup
};
static const struct tty_operations pty_unix98_ops = {
.lookup = pts_unix98_lookup,
.install = pty_unix98_install,
- .remove = pts_unix98_remove,
+ .remove = pty_unix98_remove,
.open = pty_open,
.close = pty_close,
.write = pty_write,
@@ -594,7 +596,7 @@ static const struct tty_operations pty_unix98_ops = {
.chars_in_buffer = pty_chars_in_buffer,
.unthrottle = pty_unthrottle,
.set_termios = pty_set_termios,
- .shutdown = pty_unix98_shutdown
+ .cleanup = pty_cleanup,
};
/**
@@ -622,26 +624,27 @@ static int ptmx_open(struct inode *inode, struct file *filp)
return retval;
/* find a device that is not in use. */
- tty_lock();
+ mutex_lock(&devpts_mutex);
index = devpts_new_index(inode);
- tty_unlock();
if (index < 0) {
retval = index;
goto err_file;
}
+ mutex_unlock(&devpts_mutex);
+
mutex_lock(&tty_mutex);
- mutex_lock(&devpts_mutex);
tty = tty_init_dev(ptm_driver, index);
- mutex_unlock(&devpts_mutex);
- tty_lock();
- mutex_unlock(&tty_mutex);
if (IS_ERR(tty)) {
retval = PTR_ERR(tty);
goto out;
}
+ /* The tty returned here is locked so we can safely
+ drop the mutex */
+ mutex_unlock(&tty_mutex);
+
set_bit(TTY_PTY_LOCK, &tty->flags); /* LOCK THE SLAVE */
tty_add_file(tty, filp);
@@ -654,16 +657,17 @@ static int ptmx_open(struct inode *inode, struct file *filp)
if (retval)
goto err_release;
- tty_unlock();
+ tty_unlock(tty);
return 0;
err_release:
- tty_unlock();
+ tty_unlock(tty);
tty_release(inode, filp);
return retval;
out:
+ mutex_unlock(&tty_mutex);
devpts_kill_index(inode, index);
- tty_unlock();
err_file:
+ mutex_unlock(&devpts_mutex);
tty_free_file(filp);
return retval;
}
@@ -672,11 +676,21 @@ static struct file_operations ptmx_fops;
static void __init unix98_pty_init(void)
{
- ptm_driver = alloc_tty_driver(NR_UNIX98_PTY_MAX);
- if (!ptm_driver)
+ ptm_driver = tty_alloc_driver(NR_UNIX98_PTY_MAX,
+ TTY_DRIVER_RESET_TERMIOS |
+ TTY_DRIVER_REAL_RAW |
+ TTY_DRIVER_DYNAMIC_DEV |
+ TTY_DRIVER_DEVPTS_MEM |
+ TTY_DRIVER_DYNAMIC_ALLOC);
+ if (IS_ERR(ptm_driver))
panic("Couldn't allocate Unix98 ptm driver");
- pts_driver = alloc_tty_driver(NR_UNIX98_PTY_MAX);
- if (!pts_driver)
+ pts_driver = tty_alloc_driver(NR_UNIX98_PTY_MAX,
+ TTY_DRIVER_RESET_TERMIOS |
+ TTY_DRIVER_REAL_RAW |
+ TTY_DRIVER_DYNAMIC_DEV |
+ TTY_DRIVER_DEVPTS_MEM |
+ TTY_DRIVER_DYNAMIC_ALLOC);
+ if (IS_ERR(pts_driver))
panic("Couldn't allocate Unix98 pts driver");
ptm_driver->driver_name = "pty_master";
@@ -692,8 +706,6 @@ static void __init unix98_pty_init(void)
ptm_driver->init_termios.c_lflag = 0;
ptm_driver->init_termios.c_ispeed = 38400;
ptm_driver->init_termios.c_ospeed = 38400;
- ptm_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW |
- TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_DEVPTS_MEM;
ptm_driver->other = pts_driver;
tty_set_operations(ptm_driver, &ptm_unix98_ops);
@@ -707,8 +719,6 @@ static void __init unix98_pty_init(void)
pts_driver->init_termios.c_cflag = B38400 | CS8 | CREAD;
pts_driver->init_termios.c_ispeed = 38400;
pts_driver->init_termios.c_ospeed = 38400;
- pts_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW |
- TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_DEVPTS_MEM;
pts_driver->other = ptm_driver;
tty_set_operations(pts_driver, &pty_unix98_ops);
diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c
index 777d5f9cf6c..9700d34b20a 100644
--- a/drivers/tty/rocket.c
+++ b/drivers/tty/rocket.c
@@ -704,8 +704,8 @@ static void init_r_port(int board, int aiop, int chan, struct pci_dev *pci_dev)
spin_lock_init(&info->slock);
mutex_init(&info->write_mtx);
rp_table[line] = info;
- tty_register_device(rocket_driver, line, pci_dev ? &pci_dev->dev :
- NULL);
+ tty_port_register_device(&info->port, rocket_driver, line,
+ pci_dev ? &pci_dev->dev : NULL);
}
/*
@@ -720,7 +720,7 @@ static void configure_r_port(struct tty_struct *tty, struct r_port *info,
unsigned rocketMode;
int bits, baud, divisor;
CHANNEL_t *cp;
- struct ktermios *t = tty->termios;
+ struct ktermios *t = &tty->termios;
cp = &info->channel;
cflag = t->c_cflag;
@@ -978,7 +978,7 @@ static int rp_open(struct tty_struct *tty, struct file *filp)
tty->alt_speed = 460800;
configure_r_port(tty, info, NULL);
- if (tty->termios->c_cflag & CBAUD) {
+ if (tty->termios.c_cflag & CBAUD) {
sSetDTR(cp);
sSetRTS(cp);
}
@@ -1089,35 +1089,35 @@ static void rp_set_termios(struct tty_struct *tty,
if (rocket_paranoia_check(info, "rp_set_termios"))
return;
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
/*
* This driver doesn't support CS5 or CS6
*/
if (((cflag & CSIZE) == CS5) || ((cflag & CSIZE) == CS6))
- tty->termios->c_cflag =
+ tty->termios.c_cflag =
((cflag & ~CSIZE) | (old_termios->c_cflag & CSIZE));
/* Or CMSPAR */
- tty->termios->c_cflag &= ~CMSPAR;
+ tty->termios.c_cflag &= ~CMSPAR;
configure_r_port(tty, info, old_termios);
cp = &info->channel;
/* Handle transition to B0 status */
- if ((old_termios->c_cflag & CBAUD) && !(tty->termios->c_cflag & CBAUD)) {
+ if ((old_termios->c_cflag & CBAUD) && !(tty->termios.c_cflag & CBAUD)) {
sClrDTR(cp);
sClrRTS(cp);
}
/* Handle transition away from B0 status */
- if (!(old_termios->c_cflag & CBAUD) && (tty->termios->c_cflag & CBAUD)) {
- if (!tty->hw_stopped || !(tty->termios->c_cflag & CRTSCTS))
+ if (!(old_termios->c_cflag & CBAUD) && (tty->termios.c_cflag & CBAUD)) {
+ if (!tty->hw_stopped || !(tty->termios.c_cflag & CRTSCTS))
sSetRTS(cp);
sSetDTR(cp);
}
- if ((old_termios->c_cflag & CRTSCTS) && !(tty->termios->c_cflag & CRTSCTS)) {
+ if ((old_termios->c_cflag & CRTSCTS) && !(tty->termios.c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
rp_start(tty);
}
diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c
index 3ed20e435e5..66c38a3f74c 100644
--- a/drivers/tty/serial/68328serial.c
+++ b/drivers/tty/serial/68328serial.c
@@ -515,7 +515,7 @@ static void change_speed(struct m68k_serial *info, struct tty_struct *tty)
unsigned cflag;
int i;
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
if (!(port = info->port))
return;
@@ -617,7 +617,7 @@ static void rs_set_ldisc(struct tty_struct *tty)
if (serial_paranoia_check(info, tty->name, "rs_set_ldisc"))
return;
- info->is_cons = (tty->termios->c_line == N_TTY);
+ info->is_cons = (tty->termios.c_line == N_TTY);
printk("ttyS%d console mode %s\n", info->line, info->is_cons ? "on" : "off");
}
@@ -985,7 +985,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
change_speed(info, tty);
if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios->c_cflag & CRTSCTS)) {
+ !(tty->termios.c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
rs_start(tty);
}
@@ -1070,7 +1070,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
if (tty->ldisc.close)
(tty->ldisc.close)(tty);
tty->ldisc = ldiscs[N_TTY];
- tty->termios->c_line = N_TTY;
+ tty->termios.c_line = N_TTY;
if (tty->ldisc.open)
(tty->ldisc.open)(tty);
}
@@ -1189,12 +1189,6 @@ rs68328_init(void)
serial_driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(serial_driver, &rs_ops);
- if (tty_register_driver(serial_driver)) {
- put_tty_driver(serial_driver);
- printk(KERN_ERR "Couldn't register serial driver\n");
- return -ENOMEM;
- }
-
local_irq_save(flags);
for(i=0;i<NR_PORTS;i++) {
@@ -1224,8 +1218,17 @@ rs68328_init(void)
0,
"M68328_UART", info))
panic("Unable to attach 68328 serial interrupt\n");
+
+ tty_port_link_device(&info->tport, serial_driver, i);
}
local_irq_restore(flags);
+
+ if (tty_register_driver(serial_driver)) {
+ put_tty_driver(serial_driver);
+ printk(KERN_ERR "Couldn't register serial driver\n");
+ return -ENOMEM;
+ }
+
return 0;
}
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index 8123f784bcd..d4e0b07cb13 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -2202,6 +2202,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
unsigned char cval, fcr = 0;
unsigned long flags;
unsigned int baud, quot;
+ int fifo_bug = 0;
switch (termios->c_cflag & CSIZE) {
case CS5:
@@ -2221,8 +2222,11 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
if (termios->c_cflag & CSTOPB)
cval |= UART_LCR_STOP;
- if (termios->c_cflag & PARENB)
+ if (termios->c_cflag & PARENB) {
cval |= UART_LCR_PARITY;
+ if (up->bugs & UART_BUG_PARITY)
+ fifo_bug = 1;
+ }
if (!(termios->c_cflag & PARODD))
cval |= UART_LCR_EPAR;
#ifdef CMSPAR
@@ -2246,7 +2250,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
if (up->capabilities & UART_CAP_FIFO && port->fifosize > 1) {
fcr = uart_config[port->type].fcr;
- if (baud < 2400) {
+ if (baud < 2400 || fifo_bug) {
fcr &= ~UART_FCR_TRIGGER_MASK;
fcr |= UART_FCR_TRIGGER_1;
}
@@ -2336,7 +2340,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
serial_port_out(port, UART_EFR, efr);
}
-#ifdef CONFIG_ARCH_OMAP
+#ifdef CONFIG_ARCH_OMAP1
/* Workaround to enable 115200 baud on OMAP1510 internal ports */
if (cpu_is_omap1510() && is_omap_port(up)) {
if (baud == 115200) {
@@ -2426,7 +2430,7 @@ static unsigned int serial8250_port_size(struct uart_8250_port *pt)
{
if (pt->port.iotype == UPIO_AU)
return 0x1000;
-#ifdef CONFIG_ARCH_OMAP
+#ifdef CONFIG_ARCH_OMAP1
if (is_omap_port(pt))
return 0x16 << pt->port.regshift;
#endif
@@ -2979,36 +2983,36 @@ void serial8250_resume_port(int line)
static int __devinit serial8250_probe(struct platform_device *dev)
{
struct plat_serial8250_port *p = dev->dev.platform_data;
- struct uart_port port;
+ struct uart_8250_port uart;
int ret, i, irqflag = 0;
- memset(&port, 0, sizeof(struct uart_port));
+ memset(&uart, 0, sizeof(uart));
if (share_irqs)
irqflag = IRQF_SHARED;
for (i = 0; p && p->flags != 0; p++, i++) {
- port.iobase = p->iobase;
- port.membase = p->membase;
- port.irq = p->irq;
- port.irqflags = p->irqflags;
- port.uartclk = p->uartclk;
- port.regshift = p->regshift;
- port.iotype = p->iotype;
- port.flags = p->flags;
- port.mapbase = p->mapbase;
- port.hub6 = p->hub6;
- port.private_data = p->private_data;
- port.type = p->type;
- port.serial_in = p->serial_in;
- port.serial_out = p->serial_out;
- port.handle_irq = p->handle_irq;
- port.handle_break = p->handle_break;
- port.set_termios = p->set_termios;
- port.pm = p->pm;
- port.dev = &dev->dev;
- port.irqflags |= irqflag;
- ret = serial8250_register_port(&port);
+ uart.port.iobase = p->iobase;
+ uart.port.membase = p->membase;
+ uart.port.irq = p->irq;
+ uart.port.irqflags = p->irqflags;
+ uart.port.uartclk = p->uartclk;
+ uart.port.regshift = p->regshift;
+ uart.port.iotype = p->iotype;
+ uart.port.flags = p->flags;
+ uart.port.mapbase = p->mapbase;
+ uart.port.hub6 = p->hub6;
+ uart.port.private_data = p->private_data;
+ uart.port.type = p->type;
+ uart.port.serial_in = p->serial_in;
+ uart.port.serial_out = p->serial_out;
+ uart.port.handle_irq = p->handle_irq;
+ uart.port.handle_break = p->handle_break;
+ uart.port.set_termios = p->set_termios;
+ uart.port.pm = p->pm;
+ uart.port.dev = &dev->dev;
+ uart.port.irqflags |= irqflag;
+ ret = serial8250_register_8250_port(&uart);
if (ret < 0) {
dev_err(&dev->dev, "unable to register port at index %d "
"(IO%lx MEM%llx IRQ%d): %d\n", i,
@@ -3081,7 +3085,7 @@ static struct platform_driver serial8250_isa_driver = {
static struct platform_device *serial8250_isa_devs;
/*
- * serial8250_register_port and serial8250_unregister_port allows for
+ * serial8250_register_8250_port and serial8250_unregister_port allows for
* 16x50 serial ports to be configured at run-time, to support PCMCIA
* modems and PCI multiport cards.
*/
@@ -3155,6 +3159,7 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
uart->port.regshift = up->port.regshift;
uart->port.iotype = up->port.iotype;
uart->port.flags = up->port.flags | UPF_BOOT_AUTOCONF;
+ uart->bugs = up->bugs;
uart->port.mapbase = up->port.mapbase;
uart->port.private_data = up->port.private_data;
if (up->port.dev)
@@ -3198,29 +3203,6 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
EXPORT_SYMBOL(serial8250_register_8250_port);
/**
- * serial8250_register_port - register a serial port
- * @port: serial port template
- *
- * Configure the serial port specified by the request. If the
- * port exists and is in use, it is hung up and unregistered
- * first.
- *
- * The port is then probed and if necessary the IRQ is autodetected
- * If this fails an error is returned.
- *
- * On success the port is ready to use and the line number is returned.
- */
-int serial8250_register_port(struct uart_port *port)
-{
- struct uart_8250_port up;
-
- memset(&up, 0, sizeof(up));
- memcpy(&up.port, port, sizeof(*port));
- return serial8250_register_8250_port(&up);
-}
-EXPORT_SYMBOL(serial8250_register_port);
-
-/**
* serial8250_unregister_port - remove a 16x50 serial port at runtime
* @line: serial line number
*
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index f9719d167c8..0c5e908df0b 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -13,36 +13,6 @@
#include <linux/serial_8250.h>
-struct uart_8250_port {
- struct uart_port port;
- struct timer_list timer; /* "no irq" timer */
- struct list_head list; /* ports on this IRQ */
- unsigned short capabilities; /* port capabilities */
- unsigned short bugs; /* port bugs */
- unsigned int tx_loadsz; /* transmit fifo load size */
- unsigned char acr;
- unsigned char ier;
- unsigned char lcr;
- unsigned char mcr;
- unsigned char mcr_mask; /* mask of user bits */
- unsigned char mcr_force; /* mask of forced bits */
- unsigned char cur_iotype; /* Running I/O type */
-
- /*
- * Some bits in registers are cleared on a read, so they must
- * be saved whenever the register is read but the bits will not
- * be immediately processed.
- */
-#define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS
- unsigned char lsr_saved_flags;
-#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
- unsigned char msr_saved_flags;
-
- /* 8250 specific callbacks */
- int (*dl_read)(struct uart_8250_port *);
- void (*dl_write)(struct uart_8250_port *, int);
-};
-
struct old_serial_port {
unsigned int uart;
unsigned int baud_base;
@@ -56,9 +26,6 @@ struct old_serial_port {
unsigned long irqflags;
};
-/*
- * This replaces serial_uart_config in include/linux/serial.h
- */
struct serial8250_config {
const char *name;
unsigned short fifo_size;
@@ -78,6 +45,7 @@ struct serial8250_config {
#define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */
#define UART_BUG_NOMSR (1 << 2) /* UART has buggy MSR status bits (Au1x00) */
#define UART_BUG_THRE (1 << 3) /* UART has buggy THRE reassertion */
+#define UART_BUG_PARITY (1 << 4) /* UART mishandles parity if FIFO enabled */
#define PROBE_RSA (1 << 0)
#define PROBE_ANY (~0)
diff --git a/drivers/tty/serial/8250/8250_acorn.c b/drivers/tty/serial/8250/8250_acorn.c
index b0ce8c56f1a..857498312a9 100644
--- a/drivers/tty/serial/8250/8250_acorn.c
+++ b/drivers/tty/serial/8250/8250_acorn.c
@@ -43,7 +43,7 @@ serial_card_probe(struct expansion_card *ec, const struct ecard_id *id)
{
struct serial_card_info *info;
struct serial_card_type *type = id->data;
- struct uart_port port;
+ struct uart_8250_port uart;
unsigned long bus_addr;
unsigned int i;
@@ -62,19 +62,19 @@ serial_card_probe(struct expansion_card *ec, const struct ecard_id *id)
ecard_set_drvdata(ec, info);
- memset(&port, 0, sizeof(struct uart_port));
- port.irq = ec->irq;
- port.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
- port.uartclk = type->uartclk;
- port.iotype = UPIO_MEM;
- port.regshift = 2;
- port.dev = &ec->dev;
+ memset(&uart, 0, sizeof(struct uart_8250_port));
+ uart.port.irq = ec->irq;
+ uart.port.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
+ uart.port.uartclk = type->uartclk;
+ uart.port.iotype = UPIO_MEM;
+ uart.port.regshift = 2;
+ uart.port.dev = &ec->dev;
for (i = 0; i < info->num_ports; i ++) {
- port.membase = info->vaddr + type->offset[i];
- port.mapbase = bus_addr + type->offset[i];
+ uart.port.membase = info->vaddr + type->offset[i];
+ uart.port.mapbase = bus_addr + type->offset[i];
- info->ports[i] = serial8250_register_port(&port);
+ info->ports[i] = serial8250_register_8250_port(&uart);
}
return 0;
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index f574eef3075..c3b2ec0c8c0 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -89,7 +89,7 @@ static int dw8250_handle_irq(struct uart_port *p)
static int __devinit dw8250_probe(struct platform_device *pdev)
{
- struct uart_port port = {};
+ struct uart_8250_port uart = {};
struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
struct device_node *np = pdev->dev.of_node;
@@ -104,28 +104,28 @@ static int __devinit dw8250_probe(struct platform_device *pdev)
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
- port.private_data = data;
-
- spin_lock_init(&port.lock);
- port.mapbase = regs->start;
- port.irq = irq->start;
- port.handle_irq = dw8250_handle_irq;
- port.type = PORT_8250;
- port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP |
+ uart.port.private_data = data;
+
+ spin_lock_init(&uart.port.lock);
+ uart.port.mapbase = regs->start;
+ uart.port.irq = irq->start;
+ uart.port.handle_irq = dw8250_handle_irq;
+ uart.port.type = PORT_8250;
+ uart.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP |
UPF_FIXED_PORT | UPF_FIXED_TYPE;
- port.dev = &pdev->dev;
+ uart.port.dev = &pdev->dev;
- port.iotype = UPIO_MEM;
- port.serial_in = dw8250_serial_in;
- port.serial_out = dw8250_serial_out;
+ uart.port.iotype = UPIO_MEM;
+ uart.port.serial_in = dw8250_serial_in;
+ uart.port.serial_out = dw8250_serial_out;
if (!of_property_read_u32(np, "reg-io-width", &val)) {
switch (val) {
case 1:
break;
case 4:
- port.iotype = UPIO_MEM32;
- port.serial_in = dw8250_serial_in32;
- port.serial_out = dw8250_serial_out32;
+ uart.port.iotype = UPIO_MEM32;
+ uart.port.serial_in = dw8250_serial_in32;
+ uart.port.serial_out = dw8250_serial_out32;
break;
default:
dev_err(&pdev->dev, "unsupported reg-io-width (%u)\n",
@@ -135,15 +135,15 @@ static int __devinit dw8250_probe(struct platform_device *pdev)
}
if (!of_property_read_u32(np, "reg-shift", &val))
- port.regshift = val;
+ uart.port.regshift = val;
if (of_property_read_u32(np, "clock-frequency", &val)) {
dev_err(&pdev->dev, "no clock-frequency property set\n");
return -EINVAL;
}
- port.uartclk = val;
+ uart.port.uartclk = val;
- data->line = serial8250_register_port(&port);
+ data->line = serial8250_register_8250_port(&uart);
if (data->line < 0)
return data->line;
diff --git a/drivers/tty/serial/8250/8250_gsc.c b/drivers/tty/serial/8250/8250_gsc.c
index d8c0ffbfa6e..097dff9c08a 100644
--- a/drivers/tty/serial/8250/8250_gsc.c
+++ b/drivers/tty/serial/8250/8250_gsc.c
@@ -26,7 +26,7 @@
static int __init serial_init_chip(struct parisc_device *dev)
{
- struct uart_port port;
+ struct uart_8250_port uart;
unsigned long address;
int err;
@@ -48,21 +48,21 @@ static int __init serial_init_chip(struct parisc_device *dev)
if (dev->id.sversion != 0x8d)
address += 0x800;
- memset(&port, 0, sizeof(port));
- port.iotype = UPIO_MEM;
+ memset(&uart, 0, sizeof(uart));
+ uart.port.iotype = UPIO_MEM;
/* 7.272727MHz on Lasi. Assumed the same for Dino, Wax and Timi. */
- port.uartclk = 7272727;
- port.mapbase = address;
- port.membase = ioremap_nocache(address, 16);
- port.irq = dev->irq;
- port.flags = UPF_BOOT_AUTOCONF;
- port.dev = &dev->dev;
-
- err = serial8250_register_port(&port);
+ uart.port.uartclk = 7272727;
+ uart.port.mapbase = address;
+ uart.port.membase = ioremap_nocache(address, 16);
+ uart.port.irq = dev->irq;
+ uart.port.flags = UPF_BOOT_AUTOCONF;
+ uart.port.dev = &dev->dev;
+
+ err = serial8250_register_8250_port(&uart);
if (err < 0) {
printk(KERN_WARNING
- "serial8250_register_port returned error %d\n", err);
- iounmap(port.membase);
+ "serial8250_register_8250_port returned error %d\n", err);
+ iounmap(uart.port.membase);
return err;
}
diff --git a/drivers/tty/serial/8250/8250_hp300.c b/drivers/tty/serial/8250/8250_hp300.c
index c13438c9301..8f1dd2cc00a 100644
--- a/drivers/tty/serial/8250/8250_hp300.c
+++ b/drivers/tty/serial/8250/8250_hp300.c
@@ -171,7 +171,7 @@ static int __devinit hpdca_init_one(struct dio_dev *d,
return 0;
}
#endif
- memset(&port, 0, sizeof(struct uart_port));
+ memset(&uart, 0, sizeof(uart));
/* Memory mapped I/O */
port.iotype = UPIO_MEM;
@@ -182,7 +182,7 @@ static int __devinit hpdca_init_one(struct dio_dev *d,
port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE);
port.regshift = 1;
port.dev = &d->dev;
- line = serial8250_register_port(&port);
+ line = serial8250_register_8250_port(&uart);
if (line < 0) {
printk(KERN_NOTICE "8250_hp300: register_serial() DCA scode %d"
@@ -210,7 +210,7 @@ static int __init hp300_8250_init(void)
#ifdef CONFIG_HPAPCI
int line;
unsigned long base;
- struct uart_port uport;
+ struct uart_8250_port uart;
struct hp300_port *port;
int i;
#endif
@@ -248,26 +248,26 @@ static int __init hp300_8250_init(void)
if (!port)
return -ENOMEM;
- memset(&uport, 0, sizeof(struct uart_port));
+ memset(&uart, 0, sizeof(uart));
base = (FRODO_BASE + FRODO_APCI_OFFSET(i));
/* Memory mapped I/O */
- uport.iotype = UPIO_MEM;
- uport.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ \
+ uart.port.iotype = UPIO_MEM;
+ uart.port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ \
| UPF_BOOT_AUTOCONF;
/* XXX - no interrupt support yet */
- uport.irq = 0;
- uport.uartclk = HPAPCI_BAUD_BASE * 16;
- uport.mapbase = base;
- uport.membase = (char *)(base + DIO_VIRADDRBASE);
- uport.regshift = 2;
+ uart.port.irq = 0;
+ uart.port.uartclk = HPAPCI_BAUD_BASE * 16;
+ uart.port.mapbase = base;
+ uart.port.membase = (char *)(base + DIO_VIRADDRBASE);
+ uart.port.regshift = 2;
- line = serial8250_register_port(&uport);
+ line = serial8250_register_8250_port(&uart);
if (line < 0) {
printk(KERN_NOTICE "8250_hp300: register_serial() APCI"
- " %d irq %d failed\n", i, uport.irq);
+ " %d irq %d failed\n", i, uart.port.irq);
kfree(port);
continue;
}
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 28e7c7cce89..fdab80a4e06 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -44,7 +44,7 @@ struct pci_serial_quirk {
int (*init)(struct pci_dev *dev);
int (*setup)(struct serial_private *,
const struct pciserial_board *,
- struct uart_port *, int);
+ struct uart_8250_port *, int);
void (*exit)(struct pci_dev *dev);
};
@@ -59,7 +59,7 @@ struct serial_private {
};
static int pci_default_setup(struct serial_private*,
- const struct pciserial_board*, struct uart_port*, int);
+ const struct pciserial_board*, struct uart_8250_port *, int);
static void moan_device(const char *str, struct pci_dev *dev)
{
@@ -74,7 +74,7 @@ static void moan_device(const char *str, struct pci_dev *dev)
}
static int
-setup_port(struct serial_private *priv, struct uart_port *port,
+setup_port(struct serial_private *priv, struct uart_8250_port *port,
int bar, int offset, int regshift)
{
struct pci_dev *dev = priv->dev;
@@ -93,17 +93,17 @@ setup_port(struct serial_private *priv, struct uart_port *port,
if (!priv->remapped_bar[bar])
return -ENOMEM;
- port->iotype = UPIO_MEM;
- port->iobase = 0;
- port->mapbase = base + offset;
- port->membase = priv->remapped_bar[bar] + offset;
- port->regshift = regshift;
+ port->port.iotype = UPIO_MEM;
+ port->port.iobase = 0;
+ port->port.mapbase = base + offset;
+ port->port.membase = priv->remapped_bar[bar] + offset;
+ port->port.regshift = regshift;
} else {
- port->iotype = UPIO_PORT;
- port->iobase = base + offset;
- port->mapbase = 0;
- port->membase = NULL;
- port->regshift = 0;
+ port->port.iotype = UPIO_PORT;
+ port->port.iobase = base + offset;
+ port->port.mapbase = 0;
+ port->port.membase = NULL;
+ port->port.regshift = 0;
}
return 0;
}
@@ -113,7 +113,7 @@ setup_port(struct serial_private *priv, struct uart_port *port,
*/
static int addidata_apci7800_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
unsigned int bar = 0, offset = board->first_offset;
bar = FL_GET_BASE(board->flags);
@@ -140,7 +140,7 @@ static int addidata_apci7800_setup(struct serial_private *priv,
*/
static int
afavlab_setup(struct serial_private *priv, const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
unsigned int bar, offset = board->first_offset;
@@ -195,7 +195,7 @@ static int pci_hp_diva_init(struct pci_dev *dev)
static int
pci_hp_diva_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
unsigned int offset = board->first_offset;
unsigned int bar = FL_GET_BASE(board->flags);
@@ -370,7 +370,7 @@ static void __devexit pci_ni8430_exit(struct pci_dev *dev)
/* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */
static int
sbs_setup(struct serial_private *priv, const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
unsigned int bar, offset = board->first_offset;
@@ -525,7 +525,7 @@ static int pci_siig_init(struct pci_dev *dev)
static int pci_siig_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
unsigned int bar = FL_GET_BASE(board->flags) + idx, offset = 0;
@@ -619,7 +619,7 @@ static int pci_timedia_init(struct pci_dev *dev)
static int
pci_timedia_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
unsigned int bar = 0, offset = board->first_offset;
@@ -653,7 +653,7 @@ pci_timedia_setup(struct serial_private *priv,
static int
titan_400l_800l_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
unsigned int bar, offset = board->first_offset;
@@ -754,7 +754,7 @@ static int pci_ni8430_init(struct pci_dev *dev)
static int
pci_ni8430_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
void __iomem *p;
unsigned long base, len;
@@ -781,7 +781,7 @@ pci_ni8430_setup(struct serial_private *priv,
static int pci_netmos_9900_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
unsigned int bar;
@@ -1032,10 +1032,17 @@ static int pci_oxsemi_tornado_init(struct pci_dev *dev)
return number_uarts;
}
-static int
-pci_default_setup(struct serial_private *priv,
+static int pci_asix_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
+{
+ port->bugs |= UART_BUG_PARITY;
+ return pci_default_setup(priv, board, port, idx);
+}
+
+static int pci_default_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_8250_port *port, int idx)
{
unsigned int bar, offset = board->first_offset, maxnr;
@@ -1057,15 +1064,15 @@ pci_default_setup(struct serial_private *priv,
static int
ce4100_serial_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
int ret;
ret = setup_port(priv, port, 0, 0, board->reg_shift);
- port->iotype = UPIO_MEM32;
- port->type = PORT_XSCALE;
- port->flags = (port->flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
- port->regshift = 2;
+ port->port.iotype = UPIO_MEM32;
+ port->port.type = PORT_XSCALE;
+ port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
+ port->port.regshift = 2;
return ret;
}
@@ -1073,16 +1080,16 @@ ce4100_serial_setup(struct serial_private *priv,
static int
pci_omegapci_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
return setup_port(priv, port, 2, idx * 8, 0);
}
static int skip_tx_en_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
- port->flags |= UPF_NO_TXEN_TEST;
+ port->port.flags |= UPF_NO_TXEN_TEST;
printk(KERN_DEBUG "serial8250: skipping TxEn test for device "
"[%04x:%04x] subsystem [%04x:%04x]\n",
priv->dev->vendor,
@@ -1131,11 +1138,11 @@ static unsigned int kt_serial_in(struct uart_port *p, int offset)
static int kt_serial_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
- port->flags |= UPF_BUG_THRE;
- port->serial_in = kt_serial_in;
- port->handle_break = kt_handle_break;
+ port->port.flags |= UPF_BUG_THRE;
+ port->port.serial_in = kt_serial_in;
+ port->port.handle_break = kt_handle_break;
return skip_tx_en_setup(priv, board, port, idx);
}
@@ -1151,9 +1158,19 @@ static int pci_eg20t_init(struct pci_dev *dev)
static int
pci_xr17c154_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
+{
+ port->port.flags |= UPF_EXAR_EFR;
+ return pci_default_setup(priv, board, port, idx);
+}
+
+static int
+pci_wch_ch353_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_8250_port *port, int idx)
{
- port->flags |= UPF_EXAR_EFR;
+ port->port.flags |= UPF_FIXED_TYPE;
+ port->port.type = PORT_16550A;
return pci_default_setup(priv, board, port, idx);
}
@@ -1187,6 +1204,13 @@ pci_xr17c154_setup(struct serial_private *priv,
#define PCIE_DEVICE_ID_NEO_2_OX_IBM 0x00F6
#define PCI_DEVICE_ID_PLX_CRONYX_OMEGA 0xc001
#define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d
+#define PCI_VENDOR_ID_WCH 0x4348
+#define PCI_DEVICE_ID_WCH_CH353_4S 0x3453
+#define PCI_DEVICE_ID_WCH_CH353_2S1PF 0x5046
+#define PCI_DEVICE_ID_WCH_CH353_2S1P 0x7053
+#define PCI_VENDOR_ID_AGESTAR 0x5372
+#define PCI_DEVICE_ID_AGESTAR_9375 0x6872
+#define PCI_VENDOR_ID_ASIX 0x9710
/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
@@ -1726,7 +1750,41 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = pci_omegapci_setup,
- },
+ },
+ /* WCH CH353 2S1P card (16550 clone) */
+ {
+ .vendor = PCI_VENDOR_ID_WCH,
+ .device = PCI_DEVICE_ID_WCH_CH353_2S1P,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_wch_ch353_setup,
+ },
+ /* WCH CH353 4S card (16550 clone) */
+ {
+ .vendor = PCI_VENDOR_ID_WCH,
+ .device = PCI_DEVICE_ID_WCH_CH353_4S,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_wch_ch353_setup,
+ },
+ /* WCH CH353 2S1PF card (16550 clone) */
+ {
+ .vendor = PCI_VENDOR_ID_WCH,
+ .device = PCI_DEVICE_ID_WCH_CH353_2S1PF,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_wch_ch353_setup,
+ },
+ /*
+ * ASIX devices with FIFO bug
+ */
+ {
+ .vendor = PCI_VENDOR_ID_ASIX,
+ .device = PCI_ANY_ID,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_asix_setup,
+ },
/*
* Default "match everything" terminator entry
*/
@@ -1887,7 +1945,6 @@ enum pci_board_num_t {
pbn_panacom,
pbn_panacom2,
pbn_panacom4,
- pbn_exsys_4055,
pbn_plx_romulus,
pbn_oxsemi,
pbn_oxsemi_1_4000000,
@@ -2393,13 +2450,6 @@ static struct pciserial_board pci_boards[] __devinitdata = {
.reg_shift = 7,
},
- [pbn_exsys_4055] = {
- .flags = FL_BASE2,
- .num_ports = 4,
- .base_baud = 115200,
- .uart_offset = 8,
- },
-
/* I think this entry is broken - the first_offset looks wrong --rmk */
[pbn_plx_romulus] = {
.flags = FL_BASE2,
@@ -2624,10 +2674,14 @@ static struct pciserial_board pci_boards[] __devinitdata = {
},
};
-static const struct pci_device_id softmodem_blacklist[] = {
+static const struct pci_device_id blacklist[] = {
+ /* softmodems */
{ PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */
{ PCI_VDEVICE(MOTOROLA, 0x3052), }, /* Motorola Si3052-based modem */
{ PCI_DEVICE(0x1543, 0x3052), }, /* Si3052-based modem, default IDs */
+
+ /* multi-io cards handled by parport_serial */
+ { PCI_DEVICE(0x4348, 0x7053), }, /* WCH CH353 2S1P */
};
/*
@@ -2638,7 +2692,7 @@ static const struct pci_device_id softmodem_blacklist[] = {
static int __devinit
serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
{
- const struct pci_device_id *blacklist;
+ const struct pci_device_id *bldev;
int num_iomem, num_port, first_port = -1, i;
/*
@@ -2655,13 +2709,13 @@ serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
/*
* Do not access blacklisted devices that are known not to
- * feature serial ports.
+ * feature serial ports or are handled by other modules.
*/
- for (blacklist = softmodem_blacklist;
- blacklist < softmodem_blacklist + ARRAY_SIZE(softmodem_blacklist);
- blacklist++) {
- if (dev->vendor == blacklist->vendor &&
- dev->device == blacklist->device)
+ for (bldev = blacklist;
+ bldev < blacklist + ARRAY_SIZE(blacklist);
+ bldev++) {
+ if (dev->vendor == bldev->vendor &&
+ dev->device == bldev->device)
return -ENODEV;
}
@@ -2728,7 +2782,7 @@ serial_pci_matches(const struct pciserial_board *board,
struct serial_private *
pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board)
{
- struct uart_port serial_port;
+ struct uart_8250_port uart;
struct serial_private *priv;
struct pci_serial_quirk *quirk;
int rc, nr_ports, i;
@@ -2768,22 +2822,22 @@ pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board)
priv->dev = dev;
priv->quirk = quirk;
- memset(&serial_port, 0, sizeof(struct uart_port));
- serial_port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
- serial_port.uartclk = board->base_baud * 16;
- serial_port.irq = get_pci_irq(dev, board);
- serial_port.dev = &dev->dev;
+ memset(&uart, 0, sizeof(uart));
+ uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
+ uart.port.uartclk = board->base_baud * 16;
+ uart.port.irq = get_pci_irq(dev, board);
+ uart.port.dev = &dev->dev;
for (i = 0; i < nr_ports; i++) {
- if (quirk->setup(priv, board, &serial_port, i))
+ if (quirk->setup(priv, board, &uart, i))
break;
#ifdef SERIAL_DEBUG_PCI
printk(KERN_DEBUG "Setup PCI port: port %lx, irq %d, type %d\n",
- serial_port.iobase, serial_port.irq, serial_port.iotype);
+ uart.port.iobase, uart.port.irq, uart.port.iotype);
#endif
- priv->line[i] = serial8250_register_port(&serial_port);
+ priv->line[i] = serial8250_register_8250_port(&uart);
if (priv->line[i] < 0) {
printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), priv->line[i]);
break;
@@ -3193,7 +3247,7 @@ static struct pci_device_id serial_pci_tbl[] = {
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_EXSYS,
PCI_SUBDEVICE_ID_EXSYS_4055, 0, 0,
- pbn_exsys_4055 },
+ pbn_b2_4_115200 },
/*
* Megawolf Romulus PCI Serial Card, from Mike Hudson
* (Exoray@isys.ca)
@@ -4179,6 +4233,25 @@ static struct pci_device_id serial_pci_tbl[] = {
pbn_omegapci },
/*
+ * AgeStar as-prs2-009
+ */
+ { PCI_VENDOR_ID_AGESTAR, PCI_DEVICE_ID_AGESTAR_9375,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0, pbn_b0_bt_2_115200 },
+
+ /*
+ * WCH CH353 series devices: The 2S1P is handled by parport_serial
+ * so not listed here.
+ */
+ { PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH353_4S,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0, pbn_b0_bt_4_115200 },
+
+ { PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH353_2S1PF,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0, pbn_b0_bt_2_115200 },
+
+ /*
* These entries match devices with class COMMUNICATION_SERIAL,
* COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
*/
diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
index a2f236510ff..fde5aa60d51 100644
--- a/drivers/tty/serial/8250/8250_pnp.c
+++ b/drivers/tty/serial/8250/8250_pnp.c
@@ -424,7 +424,7 @@ static int __devinit serial_pnp_guess_board(struct pnp_dev *dev, int *flags)
static int __devinit
serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
{
- struct uart_port port;
+ struct uart_8250_port uart;
int ret, line, flags = dev_id->driver_data;
if (flags & UNKNOWN_DEV) {
@@ -433,32 +433,32 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
return ret;
}
- memset(&port, 0, sizeof(struct uart_port));
+ memset(&uart, 0, sizeof(uart));
if (pnp_irq_valid(dev, 0))
- port.irq = pnp_irq(dev, 0);
+ uart.port.irq = pnp_irq(dev, 0);
if (pnp_port_valid(dev, 0)) {
- port.iobase = pnp_port_start(dev, 0);
- port.iotype = UPIO_PORT;
+ uart.port.iobase = pnp_port_start(dev, 0);
+ uart.port.iotype = UPIO_PORT;
} else if (pnp_mem_valid(dev, 0)) {
- port.mapbase = pnp_mem_start(dev, 0);
- port.iotype = UPIO_MEM;
- port.flags = UPF_IOREMAP;
+ uart.port.mapbase = pnp_mem_start(dev, 0);
+ uart.port.iotype = UPIO_MEM;
+ uart.port.flags = UPF_IOREMAP;
} else
return -ENODEV;
#ifdef SERIAL_DEBUG_PNP
printk(KERN_DEBUG
"Setup PNP port: port %x, mem 0x%lx, irq %d, type %d\n",
- port.iobase, port.mapbase, port.irq, port.iotype);
+ uart.port.iobase, uart.port.mapbase, uart.port.irq, uart.port.iotype);
#endif
- port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
+ uart.port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
if (pnp_irq_flags(dev, 0) & IORESOURCE_IRQ_SHAREABLE)
- port.flags |= UPF_SHARE_IRQ;
- port.uartclk = 1843200;
- port.dev = &dev->dev;
+ uart.port.flags |= UPF_SHARE_IRQ;
+ uart.port.uartclk = 1843200;
+ uart.port.dev = &dev->dev;
- line = serial8250_register_port(&port);
+ line = serial8250_register_8250_port(&uart);
if (line < 0)
return -ENODEV;
diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c
index 29b695d041e..b7d48b34639 100644
--- a/drivers/tty/serial/8250/serial_cs.c
+++ b/drivers/tty/serial/8250/serial_cs.c
@@ -73,7 +73,7 @@ struct serial_quirk {
unsigned int prodid;
int multi; /* 1 = multifunction, > 1 = # ports */
void (*config)(struct pcmcia_device *);
- void (*setup)(struct pcmcia_device *, struct uart_port *);
+ void (*setup)(struct pcmcia_device *, struct uart_8250_port *);
void (*wakeup)(struct pcmcia_device *);
int (*post)(struct pcmcia_device *);
};
@@ -105,9 +105,9 @@ struct serial_cfg_mem {
* Elan VPU16551 UART with 14.7456MHz oscillator
* manfid 0x015D, 0x4C45
*/
-static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_port *port)
+static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_8250_port *uart)
{
- port->uartclk = 14745600;
+ uart->port.uartclk = 14745600;
}
static int quirk_post_ibm(struct pcmcia_device *link)
@@ -343,25 +343,25 @@ static void serial_detach(struct pcmcia_device *link)
static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
unsigned int iobase, int irq)
{
- struct uart_port port;
+ struct uart_8250_port uart;
int line;
- memset(&port, 0, sizeof (struct uart_port));
- port.iobase = iobase;
- port.irq = irq;
- port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
- port.uartclk = 1843200;
- port.dev = &handle->dev;
+ memset(&uart, 0, sizeof(uart));
+ uart.port.iobase = iobase;
+ uart.port.irq = irq;
+ uart.port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
+ uart.port.uartclk = 1843200;
+ uart.port.dev = &handle->dev;
if (buggy_uart)
- port.flags |= UPF_BUGGY_UART;
+ uart.port.flags |= UPF_BUGGY_UART;
if (info->quirk && info->quirk->setup)
- info->quirk->setup(handle, &port);
+ info->quirk->setup(handle, &uart);
- line = serial8250_register_port(&port);
+ line = serial8250_register_8250_port(&uart);
if (line < 0) {
- printk(KERN_NOTICE "serial_cs: serial8250_register_port() at "
- "0x%04lx, irq %d failed\n", (u_long)iobase, irq);
+ pr_err("serial_cs: serial8250_register_8250_port() at 0x%04lx, irq %d failed\n",
+ (unsigned long)iobase, irq);
return -EINVAL;
}
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 4720b4ba096..26907cf2574 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -257,12 +257,19 @@ config SERIAL_MAX3100
help
MAX3100 chip support
-config SERIAL_MAX3107
- tristate "MAX3107 support"
+config SERIAL_MAX310X
+ bool "MAX310X support"
depends on SPI
select SERIAL_CORE
+ select REGMAP_SPI if SPI
+ default n
help
- MAX3107 chip support
+ This selects support for an advanced UART from Maxim (Dallas).
+ Supported ICs are MAX3107, MAX3108.
+ Each IC contains 128 words each of receive and transmit FIFO
+ that can be controlled through I2C or high-speed SPI.
+
+ Say Y here if you want to support this ICs.
config SERIAL_DZ
bool "DECstation DZ serial driver"
@@ -704,6 +711,25 @@ config SERIAL_PNX8XXX_CONSOLE
If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330
and you want to use serial console, say Y. Otherwise, say N.
+config SERIAL_HS_LPC32XX
+ tristate "LPC32XX high speed serial port support"
+ depends on ARCH_LPC32XX && OF
+ select SERIAL_CORE
+ help
+ Support for the LPC32XX high speed serial ports (up to 900kbps).
+ Those are UARTs completely different from the Standard UARTs on the
+ LPC32XX SoC.
+ Choose M or Y here to build this driver.
+
+config SERIAL_HS_LPC32XX_CONSOLE
+ bool "Enable LPC32XX high speed UART serial console"
+ depends on SERIAL_HS_LPC32XX
+ select SERIAL_CORE_CONSOLE
+ help
+ If you would like to be able to use one of the high speed serial
+ ports on the LPC32XX as the console, you can do so by answering
+ Y to this option.
+
config SERIAL_CORE
tristate
@@ -1104,6 +1130,24 @@ config SERIAL_SC26XX_CONSOLE
help
Support for Console on SC2681/SC2692 serial ports.
+config SERIAL_SCCNXP
+ bool "SCCNXP serial port support"
+ depends on !SERIAL_SC26XX
+ select SERIAL_CORE
+ default n
+ help
+ This selects support for an advanced UART from NXP (Philips).
+ Supported ICs are SCC2681, SCC2691, SCC2692, SC28L91, SC28L92,
+ SC28L202, SCC68681 and SCC68692.
+ Positioned as a replacement for the driver SC26XX.
+
+config SERIAL_SCCNXP_CONSOLE
+ bool "Console on SCCNXP serial port"
+ depends on SERIAL_SCCNXP
+ select SERIAL_CORE_CONSOLE
+ help
+ Support for console on SCCNXP serial ports.
+
config SERIAL_BFIN_SPORT
tristate "Blackfin SPORT emulate UART"
depends on BLACKFIN
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 7257c5d898a..ce88667cfd1 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -28,12 +28,13 @@ obj-$(CONFIG_SERIAL_BFIN) += bfin_uart.o
obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o
obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o
obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
-obj-$(CONFIG_SERIAL_MAX3107) += max3107.o
+obj-$(CONFIG_SERIAL_MAX310X) += max310x.o
obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
obj-$(CONFIG_SERIAL_MUX) += mux.o
obj-$(CONFIG_SERIAL_68328) += 68328serial.o
obj-$(CONFIG_SERIAL_MCF) += mcf.o
obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o
+obj-$(CONFIG_SERIAL_HS_LPC32XX) += lpc32xx_hs.o
obj-$(CONFIG_SERIAL_DZ) += dz.o
obj-$(CONFIG_SERIAL_ZS) += zs.o
obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o
@@ -47,6 +48,7 @@ obj-$(CONFIG_SERIAL_MPSC) += mpsc.o
obj-$(CONFIG_SERIAL_SB1250_DUART) += sb1250-duart.o
obj-$(CONFIG_ETRAX_SERIAL) += crisv10.o
obj-$(CONFIG_SERIAL_SC26XX) += sc26xx.o
+obj-$(CONFIG_SERIAL_SCCNXP) += sccnxp.o
obj-$(CONFIG_SERIAL_JSM) += jsm/
obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o
obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index 1f0330915d5..15d80b9fb30 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -591,7 +591,7 @@ static int __devinit altera_uart_probe(struct platform_device *pdev)
port->ops = &altera_uart_ops;
port->flags = UPF_BOOT_AUTOCONF;
- dev_set_drvdata(&pdev->dev, port);
+ platform_set_drvdata(pdev, port);
uart_add_one_port(&altera_uart_driver, port);
@@ -600,11 +600,11 @@ static int __devinit altera_uart_probe(struct platform_device *pdev)
static int __devexit altera_uart_remove(struct platform_device *pdev)
{
- struct uart_port *port = dev_get_drvdata(&pdev->dev);
+ struct uart_port *port = platform_get_drvdata(pdev);
if (port) {
uart_remove_one_port(&altera_uart_driver, port);
- dev_set_drvdata(&pdev->dev, NULL);
+ platform_set_drvdata(pdev, NULL);
port->mapbase = 0;
}
diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c
index 0d91a540bf1..22317dd1647 100644
--- a/drivers/tty/serial/amba-pl010.c
+++ b/drivers/tty/serial/amba-pl010.c
@@ -312,16 +312,12 @@ static int pl010_startup(struct uart_port *port)
struct uart_amba_port *uap = (struct uart_amba_port *)port;
int retval;
- retval = clk_prepare(uap->clk);
- if (retval)
- goto out;
-
/*
* Try to enable the clock producer.
*/
- retval = clk_enable(uap->clk);
+ retval = clk_prepare_enable(uap->clk);
if (retval)
- goto clk_unprep;
+ goto out;
uap->port.uartclk = clk_get_rate(uap->clk);
@@ -346,9 +342,7 @@ static int pl010_startup(struct uart_port *port)
return 0;
clk_dis:
- clk_disable(uap->clk);
- clk_unprep:
- clk_unprepare(uap->clk);
+ clk_disable_unprepare(uap->clk);
out:
return retval;
}
@@ -375,8 +369,7 @@ static void pl010_shutdown(struct uart_port *port)
/*
* Shut down the clock producer
*/
- clk_disable(uap->clk);
- clk_unprepare(uap->clk);
+ clk_disable_unprepare(uap->clk);
}
static void
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index d3553b5d3fc..cede9387664 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -52,6 +52,8 @@
#include <linux/scatterlist.h>
#include <linux/delay.h>
#include <linux/types.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/pinctrl/consumer.h>
#include <linux/sizes.h>
@@ -75,7 +77,6 @@ struct vendor_data {
unsigned int lcrh_tx;
unsigned int lcrh_rx;
bool oversampling;
- bool interrupt_may_hang; /* vendor-specific */
bool dma_threshold;
bool cts_event_workaround;
};
@@ -96,7 +97,6 @@ static struct vendor_data vendor_st = {
.lcrh_tx = ST_UART011_LCRH_TX,
.lcrh_rx = ST_UART011_LCRH_RX,
.oversampling = true,
- .interrupt_may_hang = true,
.dma_threshold = true,
.cts_event_workaround = true,
};
@@ -147,7 +147,6 @@ struct uart_amba_port {
unsigned int old_cr; /* state during shutdown */
bool autorts;
char type[12];
- bool interrupt_may_hang; /* vendor-specific */
#ifdef CONFIG_DMA_ENGINE
/* DMA stuff */
bool using_tx_dma;
@@ -1215,14 +1214,14 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
return IRQ_RETVAL(handled);
}
-static unsigned int pl01x_tx_empty(struct uart_port *port)
+static unsigned int pl011_tx_empty(struct uart_port *port)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int status = readw(uap->port.membase + UART01x_FR);
return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT;
}
-static unsigned int pl01x_get_mctrl(struct uart_port *port)
+static unsigned int pl011_get_mctrl(struct uart_port *port)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int result = 0;
@@ -1285,7 +1284,7 @@ static void pl011_break_ctl(struct uart_port *port, int break_state)
}
#ifdef CONFIG_CONSOLE_POLL
-static int pl010_get_poll_char(struct uart_port *port)
+static int pl011_get_poll_char(struct uart_port *port)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int status;
@@ -1297,7 +1296,7 @@ static int pl010_get_poll_char(struct uart_port *port)
return readw(uap->port.membase + UART01x_DR);
}
-static void pl010_put_poll_char(struct uart_port *port,
+static void pl011_put_poll_char(struct uart_port *port,
unsigned char ch)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
@@ -1324,16 +1323,12 @@ static int pl011_startup(struct uart_port *port)
"could not set default pins\n");
}
- retval = clk_prepare(uap->clk);
- if (retval)
- goto out;
-
/*
* Try to enable the clock producer.
*/
- retval = clk_enable(uap->clk);
+ retval = clk_prepare_enable(uap->clk);
if (retval)
- goto clk_unprep;
+ goto out;
uap->port.uartclk = clk_get_rate(uap->clk);
@@ -1411,9 +1406,7 @@ static int pl011_startup(struct uart_port *port)
return 0;
clk_dis:
- clk_disable(uap->clk);
- clk_unprep:
- clk_unprepare(uap->clk);
+ clk_disable_unprepare(uap->clk);
out:
return retval;
}
@@ -1473,8 +1466,7 @@ static void pl011_shutdown(struct uart_port *port)
/*
* Shut down the clock producer
*/
- clk_disable(uap->clk);
- clk_unprepare(uap->clk);
+ clk_disable_unprepare(uap->clk);
/* Optionally let pins go into sleep states */
if (!IS_ERR(uap->pins_sleep)) {
retval = pinctrl_select_state(uap->pinctrl, uap->pins_sleep);
@@ -1637,7 +1629,7 @@ static const char *pl011_type(struct uart_port *port)
/*
* Release the memory region(s) being used by 'port'
*/
-static void pl010_release_port(struct uart_port *port)
+static void pl011_release_port(struct uart_port *port)
{
release_mem_region(port->mapbase, SZ_4K);
}
@@ -1645,7 +1637,7 @@ static void pl010_release_port(struct uart_port *port)
/*
* Request the memory region(s) being used by 'port'
*/
-static int pl010_request_port(struct uart_port *port)
+static int pl011_request_port(struct uart_port *port)
{
return request_mem_region(port->mapbase, SZ_4K, "uart-pl011")
!= NULL ? 0 : -EBUSY;
@@ -1654,18 +1646,18 @@ static int pl010_request_port(struct uart_port *port)
/*
* Configure/autoconfigure the port.
*/
-static void pl010_config_port(struct uart_port *port, int flags)
+static void pl011_config_port(struct uart_port *port, int flags)
{
if (flags & UART_CONFIG_TYPE) {
port->type = PORT_AMBA;
- pl010_request_port(port);
+ pl011_request_port(port);
}
}
/*
* verify the new serial_struct (for TIOCSSERIAL).
*/
-static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser)
+static int pl011_verify_port(struct uart_port *port, struct serial_struct *ser)
{
int ret = 0;
if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA)
@@ -1678,9 +1670,9 @@ static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser)
}
static struct uart_ops amba_pl011_pops = {
- .tx_empty = pl01x_tx_empty,
+ .tx_empty = pl011_tx_empty,
.set_mctrl = pl011_set_mctrl,
- .get_mctrl = pl01x_get_mctrl,
+ .get_mctrl = pl011_get_mctrl,
.stop_tx = pl011_stop_tx,
.start_tx = pl011_start_tx,
.stop_rx = pl011_stop_rx,
@@ -1691,13 +1683,13 @@ static struct uart_ops amba_pl011_pops = {
.flush_buffer = pl011_dma_flush_buffer,
.set_termios = pl011_set_termios,
.type = pl011_type,
- .release_port = pl010_release_port,
- .request_port = pl010_request_port,
- .config_port = pl010_config_port,
- .verify_port = pl010_verify_port,
+ .release_port = pl011_release_port,
+ .request_port = pl011_request_port,
+ .config_port = pl011_config_port,
+ .verify_port = pl011_verify_port,
#ifdef CONFIG_CONSOLE_POLL
- .poll_get_char = pl010_get_poll_char,
- .poll_put_char = pl010_put_poll_char,
+ .poll_get_char = pl011_get_poll_char,
+ .poll_put_char = pl011_put_poll_char,
#endif
};
@@ -1869,6 +1861,38 @@ static struct uart_driver amba_reg = {
.cons = AMBA_CONSOLE,
};
+static int pl011_probe_dt_alias(int index, struct device *dev)
+{
+ struct device_node *np;
+ static bool seen_dev_with_alias = false;
+ static bool seen_dev_without_alias = false;
+ int ret = index;
+
+ if (!IS_ENABLED(CONFIG_OF))
+ return ret;
+
+ np = dev->of_node;
+ if (!np)
+ return ret;
+
+ ret = of_alias_get_id(np, "serial");
+ if (IS_ERR_VALUE(ret)) {
+ seen_dev_without_alias = true;
+ ret = index;
+ } else {
+ seen_dev_with_alias = true;
+ if (ret >= ARRAY_SIZE(amba_ports) || amba_ports[ret] != NULL) {
+ dev_warn(dev, "requested serial port %d not available.\n", ret);
+ ret = index;
+ }
+ }
+
+ if (seen_dev_with_alias && seen_dev_without_alias)
+ dev_warn(dev, "aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable.\n");
+
+ return ret;
+}
+
static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
{
struct uart_amba_port *uap;
@@ -1891,6 +1915,8 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
goto out;
}
+ i = pl011_probe_dt_alias(i, &dev->dev);
+
base = ioremap(dev->res.start, resource_size(&dev->res));
if (!base) {
ret = -ENOMEM;
@@ -1923,7 +1949,6 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
uap->lcrh_tx = vendor->lcrh_tx;
uap->old_cr = 0;
uap->fifosize = vendor->fifosize;
- uap->interrupt_may_hang = vendor->interrupt_may_hang;
uap->port.dev = &dev->dev;
uap->port.mapbase = dev->res.start;
uap->port.membase = base;
diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c
index bd97db23985..9242d56ba26 100644
--- a/drivers/tty/serial/bfin_uart.c
+++ b/drivers/tty/serial/bfin_uart.c
@@ -182,7 +182,7 @@ static void bfin_serial_start_tx(struct uart_port *port)
* To avoid losting RX interrupt, we reset IR function
* before sending data.
*/
- if (tty->termios->c_line == N_IRDA)
+ if (tty->termios.c_line == N_IRDA)
bfin_serial_reset_irda(port);
#ifdef CONFIG_SERIAL_BFIN_DMA
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index 80b6b1b1f72..35ee6a2c687 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -955,7 +955,7 @@ static const struct control_pins e100_modem_pins[NR_PORTS] =
/* Calculate the chartime depending on baudrate, numbor of bits etc. */
static void update_char_time(struct e100_serial * info)
{
- tcflag_t cflags = info->port.tty->termios->c_cflag;
+ tcflag_t cflags = info->port.tty->termios.c_cflag;
int bits;
/* calc. number of bits / data byte */
@@ -1473,7 +1473,7 @@ rs_stop(struct tty_struct *tty)
xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char,
STOP_CHAR(info->port.tty));
xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, stop);
- if (tty->termios->c_iflag & IXON ) {
+ if (tty->termios.c_iflag & IXON ) {
xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
}
@@ -1496,7 +1496,7 @@ rs_start(struct tty_struct *tty)
info->xmit.tail,SERIAL_XMIT_SIZE)));
xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(tty));
xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable);
- if (tty->termios->c_iflag & IXON ) {
+ if (tty->termios.c_iflag & IXON ) {
xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
}
@@ -2929,7 +2929,7 @@ shutdown(struct e100_serial * info)
descr[i].buf = 0;
}
- if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) {
+ if (!info->port.tty || (info->port.tty->termios.c_cflag & HUPCL)) {
/* hang up DTR and RTS if HUPCL is enabled */
e100_dtr(info, 0);
e100_rts(info, 0); /* could check CRTSCTS before doing this */
@@ -2953,12 +2953,12 @@ change_speed(struct e100_serial *info)
unsigned long flags;
/* first some safety checks */
- if (!info->port.tty || !info->port.tty->termios)
+ if (!info->port.tty)
return;
if (!info->ioport)
return;
- cflag = info->port.tty->termios->c_cflag;
+ cflag = info->port.tty->termios.c_cflag;
/* possibly, the tx/rx should be disabled first to do this safely */
@@ -3088,7 +3088,7 @@ change_speed(struct e100_serial *info)
info->ioport[REG_REC_CTRL] = info->rx_ctrl;
xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(info->port.tty));
xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable);
- if (info->port.tty->termios->c_iflag & IXON ) {
+ if (info->port.tty->termios.c_iflag & IXON ) {
DFLOW(DEBUG_LOG(info->line, "FLOW XOFF enabled 0x%02X\n",
STOP_CHAR(info->port.tty)));
xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
@@ -3355,7 +3355,7 @@ rs_throttle(struct tty_struct * tty)
DFLOW(DEBUG_LOG(info->line,"rs_throttle %lu\n", tty->ldisc.chars_in_buffer(tty)));
/* Do RTS before XOFF since XOFF might take some time */
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
/* Turn off RTS line */
e100_rts(info, 0);
}
@@ -3377,7 +3377,7 @@ rs_unthrottle(struct tty_struct * tty)
DFLOW(DEBUG_LOG(info->line,"rs_unthrottle ldisc %d\n", tty->ldisc.chars_in_buffer(tty)));
DFLOW(DEBUG_LOG(info->line,"rs_unthrottle flip.count: %i\n", tty->flip.count));
/* Do RTS before XOFF since XOFF might take some time */
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
/* Assert RTS line */
e100_rts(info, 1);
}
@@ -3748,7 +3748,7 @@ rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
/* Handle turning off CRTSCTS */
if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios->c_cflag & CRTSCTS)) {
+ !(tty->termios.c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
rs_start(tty);
}
@@ -3815,7 +3815,7 @@ rs_close(struct tty_struct *tty, struct file * filp)
* separate termios for callout and dialin.
*/
if (info->flags & ASYNC_NORMAL_ACTIVE)
- info->normal_termios = *tty->termios;
+ info->normal_termios = tty->termios;
/*
* Now we wait for the transmit buffer to clear; and we notify
* the line discipline to only process XON/XOFF characters.
@@ -3976,7 +3976,7 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
*/
if (tty_hung_up_p(filp) ||
(info->flags & ASYNC_CLOSING)) {
- wait_event_interruptible_tty(info->close_wait,
+ wait_event_interruptible_tty(tty, info->close_wait,
!(info->flags & ASYNC_CLOSING));
#ifdef SERIAL_DO_RESTART
if (info->flags & ASYNC_HUP_NOTIFY)
@@ -3998,7 +3998,7 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
return 0;
}
- if (tty->termios->c_cflag & CLOCAL) {
+ if (tty->termios.c_cflag & CLOCAL) {
do_clocal = 1;
}
@@ -4052,9 +4052,9 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
printk("block_til_ready blocking: ttyS%d, count = %d\n",
info->line, info->count);
#endif
- tty_unlock();
+ tty_unlock(tty);
schedule();
- tty_lock();
+ tty_lock(tty);
}
set_current_state(TASK_RUNNING);
remove_wait_queue(&info->open_wait, &wait);
@@ -4115,7 +4115,7 @@ rs_open(struct tty_struct *tty, struct file * filp)
*/
if (tty_hung_up_p(filp) ||
(info->flags & ASYNC_CLOSING)) {
- wait_event_interruptible_tty(info->close_wait,
+ wait_event_interruptible_tty(tty, info->close_wait,
!(info->flags & ASYNC_CLOSING));
#ifdef SERIAL_DO_RESTART
return ((info->flags & ASYNC_HUP_NOTIFY) ?
@@ -4219,7 +4219,7 @@ rs_open(struct tty_struct *tty, struct file * filp)
}
if ((info->count == 1) && (info->flags & ASYNC_SPLIT_TERMIOS)) {
- *tty->termios = info->normal_termios;
+ tty->termios = info->normal_termios;
change_speed(info);
}
@@ -4443,14 +4443,12 @@ static int __init rs_init(void)
B115200 | CS8 | CREAD | HUPCL | CLOCAL; /* is normally B9600 default... */
driver->init_termios.c_ispeed = 115200;
driver->init_termios.c_ospeed = 115200;
- driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+ driver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(driver, &rs_ops);
serial_driver = driver;
- if (tty_register_driver(driver))
- panic("Couldn't register serial driver\n");
- /* do some initializing for the separate ports */
+ /* do some initializing for the separate ports */
for (i = 0, info = rs_table; i < NR_PORTS; i++,info++) {
if (info->enabled) {
if (cris_request_io_interface(info->io_if,
@@ -4502,7 +4500,12 @@ static int __init rs_init(void)
printk(KERN_INFO "%s%d at %p is a builtin UART with DMA\n",
serial_driver->name, info->line, info->ioport);
}
+ tty_port_link_device(&info->port, driver, i);
}
+
+ if (tty_register_driver(driver))
+ panic("Couldn't register serial driver\n");
+
#ifdef CONFIG_ETRAX_FAST_TIMER
#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
memset(fast_timers, 0, sizeof(fast_timers));
diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index 3ad079ffd04..5b9bc19ed13 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -800,8 +800,8 @@ static int ifx_spi_create_port(struct ifx_spi_device *ifx_dev)
tty_port_init(pport);
pport->ops = &ifx_tty_port_ops;
ifx_dev->minor = IFX_SPI_TTY_ID;
- ifx_dev->tty_dev = tty_register_device(tty_drv, ifx_dev->minor,
- &ifx_dev->spi_dev->dev);
+ ifx_dev->tty_dev = tty_port_register_device(pport, tty_drv,
+ ifx_dev->minor, &ifx_dev->spi_dev->dev);
if (IS_ERR(ifx_dev->tty_dev)) {
dev_dbg(&ifx_dev->spi_dev->dev,
"%s: registering tty device failed", __func__);
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index d5c689d6217..72ec56e6d42 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -206,7 +206,7 @@ struct imx_port {
unsigned short trcv_delay; /* transceiver delay */
struct clk *clk_ipg;
struct clk *clk_per;
- struct imx_uart_data *devdata;
+ const struct imx_uart_data *devdata;
};
struct imx_port_ucrs {
@@ -1505,18 +1505,21 @@ static int serial_imx_probe(struct platform_device *pdev)
pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
if (IS_ERR(pinctrl)) {
ret = PTR_ERR(pinctrl);
+ dev_err(&pdev->dev, "failed to get default pinctrl: %d\n", ret);
goto unmap;
}
sport->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
if (IS_ERR(sport->clk_ipg)) {
ret = PTR_ERR(sport->clk_ipg);
+ dev_err(&pdev->dev, "failed to get ipg clk: %d\n", ret);
goto unmap;
}
sport->clk_per = devm_clk_get(&pdev->dev, "per");
if (IS_ERR(sport->clk_per)) {
ret = PTR_ERR(sport->clk_per);
+ dev_err(&pdev->dev, "failed to get per clk: %d\n", ret);
goto unmap;
}
diff --git a/drivers/tty/serial/ioc3_serial.c b/drivers/tty/serial/ioc3_serial.c
index 758ff310f7f..5ac52898a0b 100644
--- a/drivers/tty/serial/ioc3_serial.c
+++ b/drivers/tty/serial/ioc3_serial.c
@@ -1120,13 +1120,14 @@ static inline int do_read(struct uart_port *the_port, char *buf, int len)
struct ioc3_port *port = get_ioc3_port(the_port);
struct ring *inring;
struct ring_entry *entry;
- struct port_hooks *hooks = port->ip_hooks;
+ struct port_hooks *hooks;
int byte_num;
char *sc;
int loop_counter;
BUG_ON(!(len >= 0));
BUG_ON(!port);
+ hooks = port->ip_hooks;
/* There is a nasty timing issue in the IOC3. When the rx_timer
* expires or the rx_high condition arises, we take an interrupt.
diff --git a/drivers/tty/serial/ioc4_serial.c b/drivers/tty/serial/ioc4_serial.c
index e16894fb2ca..3e7da10cebb 100644
--- a/drivers/tty/serial/ioc4_serial.c
+++ b/drivers/tty/serial/ioc4_serial.c
@@ -1803,7 +1803,7 @@ static inline int ic4_startup_local(struct uart_port *the_port)
ioc4_set_proto(port, the_port->mapbase);
/* set the speed of the serial port */
- ioc4_change_speed(the_port, state->port.tty->termios,
+ ioc4_change_speed(the_port, &state->port.tty->termios,
(struct ktermios *)0);
return 0;
@@ -2069,13 +2069,14 @@ static inline int do_read(struct uart_port *the_port, unsigned char *buf,
struct ioc4_port *port = get_ioc4_port(the_port, 0);
struct ring *inring;
struct ring_entry *entry;
- struct hooks *hooks = port->ip_hooks;
+ struct hooks *hooks;
int byte_num;
char *sc;
int loop_counter;
BUG_ON(!(len >= 0));
BUG_ON(!port);
+ hooks = port->ip_hooks;
/* There is a nasty timing issue in the IOC4. When the rx_timer
* expires or the rx_high condition arises, we take an interrupt.
diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c
index 434bd881fca..71397961773 100644
--- a/drivers/tty/serial/jsm/jsm_tty.c
+++ b/drivers/tty/serial/jsm/jsm_tty.c
@@ -161,7 +161,7 @@ static void jsm_tty_send_xchar(struct uart_port *port, char ch)
struct ktermios *termios;
spin_lock_irqsave(&port->lock, lock_flags);
- termios = port->state->port.tty->termios;
+ termios = &port->state->port.tty->termios;
if (ch == termios->c_cc[VSTART])
channel->ch_bd->bd_ops->send_start_character(channel);
@@ -250,7 +250,7 @@ static int jsm_tty_open(struct uart_port *port)
channel->ch_cached_lsr = 0;
channel->ch_stops_sent = 0;
- termios = port->state->port.tty->termios;
+ termios = &port->state->port.tty->termios;
channel->ch_c_cflag = termios->c_cflag;
channel->ch_c_iflag = termios->c_iflag;
channel->ch_c_oflag = termios->c_oflag;
@@ -283,7 +283,7 @@ static void jsm_tty_close(struct uart_port *port)
jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "start\n");
bd = channel->ch_bd;
- ts = port->state->port.tty->termios;
+ ts = &port->state->port.tty->termios;
channel->ch_flags &= ~(CH_STOPI);
@@ -567,7 +567,7 @@ void jsm_input(struct jsm_channel *ch)
*input data and return immediately.
*/
if (!tp ||
- !(tp->termios->c_cflag & CREAD) ) {
+ !(tp->termios.c_cflag & CREAD) ) {
jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
"input. dropping %d bytes on port %d...\n", data_len, ch->ch_portnum);
diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c
new file mode 100644
index 00000000000..ba3af3bf6d4
--- /dev/null
+++ b/drivers/tty/serial/lpc32xx_hs.c
@@ -0,0 +1,823 @@
+/*
+ * High Speed Serial Ports on NXP LPC32xx SoC
+ *
+ * Authors: Kevin Wells <kevin.wells@nxp.com>
+ * Roland Stigge <stigge@antcom.de>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ * Copyright (C) 2012 Roland Stigge
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/nmi.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <mach/platform.h>
+#include <mach/hardware.h>
+
+/*
+ * High Speed UART register offsets
+ */
+#define LPC32XX_HSUART_FIFO(x) ((x) + 0x00)
+#define LPC32XX_HSUART_LEVEL(x) ((x) + 0x04)
+#define LPC32XX_HSUART_IIR(x) ((x) + 0x08)
+#define LPC32XX_HSUART_CTRL(x) ((x) + 0x0C)
+#define LPC32XX_HSUART_RATE(x) ((x) + 0x10)
+
+#define LPC32XX_HSU_BREAK_DATA (1 << 10)
+#define LPC32XX_HSU_ERROR_DATA (1 << 9)
+#define LPC32XX_HSU_RX_EMPTY (1 << 8)
+
+#define LPC32XX_HSU_TX_LEV(n) (((n) >> 8) & 0xFF)
+#define LPC32XX_HSU_RX_LEV(n) ((n) & 0xFF)
+
+#define LPC32XX_HSU_TX_INT_SET (1 << 6)
+#define LPC32XX_HSU_RX_OE_INT (1 << 5)
+#define LPC32XX_HSU_BRK_INT (1 << 4)
+#define LPC32XX_HSU_FE_INT (1 << 3)
+#define LPC32XX_HSU_RX_TIMEOUT_INT (1 << 2)
+#define LPC32XX_HSU_RX_TRIG_INT (1 << 1)
+#define LPC32XX_HSU_TX_INT (1 << 0)
+
+#define LPC32XX_HSU_HRTS_INV (1 << 21)
+#define LPC32XX_HSU_HRTS_TRIG_8B (0x0 << 19)
+#define LPC32XX_HSU_HRTS_TRIG_16B (0x1 << 19)
+#define LPC32XX_HSU_HRTS_TRIG_32B (0x2 << 19)
+#define LPC32XX_HSU_HRTS_TRIG_48B (0x3 << 19)
+#define LPC32XX_HSU_HRTS_EN (1 << 18)
+#define LPC32XX_HSU_TMO_DISABLED (0x0 << 16)
+#define LPC32XX_HSU_TMO_INACT_4B (0x1 << 16)
+#define LPC32XX_HSU_TMO_INACT_8B (0x2 << 16)
+#define LPC32XX_HSU_TMO_INACT_16B (0x3 << 16)
+#define LPC32XX_HSU_HCTS_INV (1 << 15)
+#define LPC32XX_HSU_HCTS_EN (1 << 14)
+#define LPC32XX_HSU_OFFSET(n) ((n) << 9)
+#define LPC32XX_HSU_BREAK (1 << 8)
+#define LPC32XX_HSU_ERR_INT_EN (1 << 7)
+#define LPC32XX_HSU_RX_INT_EN (1 << 6)
+#define LPC32XX_HSU_TX_INT_EN (1 << 5)
+#define LPC32XX_HSU_RX_TL1B (0x0 << 2)
+#define LPC32XX_HSU_RX_TL4B (0x1 << 2)
+#define LPC32XX_HSU_RX_TL8B (0x2 << 2)
+#define LPC32XX_HSU_RX_TL16B (0x3 << 2)
+#define LPC32XX_HSU_RX_TL32B (0x4 << 2)
+#define LPC32XX_HSU_RX_TL48B (0x5 << 2)
+#define LPC32XX_HSU_TX_TLEMPTY (0x0 << 0)
+#define LPC32XX_HSU_TX_TL0B (0x0 << 0)
+#define LPC32XX_HSU_TX_TL4B (0x1 << 0)
+#define LPC32XX_HSU_TX_TL8B (0x2 << 0)
+#define LPC32XX_HSU_TX_TL16B (0x3 << 0)
+
+#define MODNAME "lpc32xx_hsuart"
+
+struct lpc32xx_hsuart_port {
+ struct uart_port port;
+};
+
+#define FIFO_READ_LIMIT 128
+#define MAX_PORTS 3
+#define LPC32XX_TTY_NAME "ttyTX"
+static struct lpc32xx_hsuart_port lpc32xx_hs_ports[MAX_PORTS];
+
+#ifdef CONFIG_SERIAL_HS_LPC32XX_CONSOLE
+static void wait_for_xmit_empty(struct uart_port *port)
+{
+ unsigned int timeout = 10000;
+
+ do {
+ if (LPC32XX_HSU_TX_LEV(readl(LPC32XX_HSUART_LEVEL(
+ port->membase))) == 0)
+ break;
+ if (--timeout == 0)
+ break;
+ udelay(1);
+ } while (1);
+}
+
+static void wait_for_xmit_ready(struct uart_port *port)
+{
+ unsigned int timeout = 10000;
+
+ while (1) {
+ if (LPC32XX_HSU_TX_LEV(readl(LPC32XX_HSUART_LEVEL(
+ port->membase))) < 32)
+ break;
+ if (--timeout == 0)
+ break;
+ udelay(1);
+ }
+}
+
+static void lpc32xx_hsuart_console_putchar(struct uart_port *port, int ch)
+{
+ wait_for_xmit_ready(port);
+ writel((u32)ch, LPC32XX_HSUART_FIFO(port->membase));
+}
+
+static void lpc32xx_hsuart_console_write(struct console *co, const char *s,
+ unsigned int count)
+{
+ struct lpc32xx_hsuart_port *up = &lpc32xx_hs_ports[co->index];
+ unsigned long flags;
+ int locked = 1;
+
+ touch_nmi_watchdog();
+ local_irq_save(flags);
+ if (up->port.sysrq)
+ locked = 0;
+ else if (oops_in_progress)
+ locked = spin_trylock(&up->port.lock);
+ else
+ spin_lock(&up->port.lock);
+
+ uart_console_write(&up->port, s, count, lpc32xx_hsuart_console_putchar);
+ wait_for_xmit_empty(&up->port);
+
+ if (locked)
+ spin_unlock(&up->port.lock);
+ local_irq_restore(flags);
+}
+
+static int __init lpc32xx_hsuart_console_setup(struct console *co,
+ char *options)
+{
+ struct uart_port *port;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ if (co->index >= MAX_PORTS)
+ co->index = 0;
+
+ port = &lpc32xx_hs_ports[co->index].port;
+ if (!port->membase)
+ return -ENODEV;
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver lpc32xx_hsuart_reg;
+static struct console lpc32xx_hsuart_console = {
+ .name = LPC32XX_TTY_NAME,
+ .write = lpc32xx_hsuart_console_write,
+ .device = uart_console_device,
+ .setup = lpc32xx_hsuart_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &lpc32xx_hsuart_reg,
+};
+
+static int __init lpc32xx_hsuart_console_init(void)
+{
+ register_console(&lpc32xx_hsuart_console);
+ return 0;
+}
+console_initcall(lpc32xx_hsuart_console_init);
+
+#define LPC32XX_HSUART_CONSOLE (&lpc32xx_hsuart_console)
+#else
+#define LPC32XX_HSUART_CONSOLE NULL
+#endif
+
+static struct uart_driver lpc32xx_hs_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = MODNAME,
+ .dev_name = LPC32XX_TTY_NAME,
+ .nr = MAX_PORTS,
+ .cons = LPC32XX_HSUART_CONSOLE,
+};
+static int uarts_registered;
+
+static unsigned int __serial_get_clock_div(unsigned long uartclk,
+ unsigned long rate)
+{
+ u32 div, goodrate, hsu_rate, l_hsu_rate, comprate;
+ u32 rate_diff;
+
+ /* Find the closest divider to get the desired clock rate */
+ div = uartclk / rate;
+ goodrate = hsu_rate = (div / 14) - 1;
+ if (hsu_rate != 0)
+ hsu_rate--;
+
+ /* Tweak divider */
+ l_hsu_rate = hsu_rate + 3;
+ rate_diff = 0xFFFFFFFF;
+
+ while (hsu_rate < l_hsu_rate) {
+ comprate = uartclk / ((hsu_rate + 1) * 14);
+ if (abs(comprate - rate) < rate_diff) {
+ goodrate = hsu_rate;
+ rate_diff = abs(comprate - rate);
+ }
+
+ hsu_rate++;
+ }
+ if (hsu_rate > 0xFF)
+ hsu_rate = 0xFF;
+
+ return goodrate;
+}
+
+static void __serial_uart_flush(struct uart_port *port)
+{
+ u32 tmp;
+ int cnt = 0;
+
+ while ((readl(LPC32XX_HSUART_LEVEL(port->membase)) > 0) &&
+ (cnt++ < FIFO_READ_LIMIT))
+ tmp = readl(LPC32XX_HSUART_FIFO(port->membase));
+}
+
+static void __serial_lpc32xx_rx(struct uart_port *port)
+{
+ unsigned int tmp, flag;
+ struct tty_struct *tty = tty_port_tty_get(&port->state->port);
+
+ if (!tty) {
+ /* Discard data: no tty available */
+ while (!(readl(LPC32XX_HSUART_FIFO(port->membase)) &
+ LPC32XX_HSU_RX_EMPTY))
+ ;
+
+ return;
+ }
+
+ /* Read data from FIFO and push into terminal */
+ tmp = readl(LPC32XX_HSUART_FIFO(port->membase));
+ while (!(tmp & LPC32XX_HSU_RX_EMPTY)) {
+ flag = TTY_NORMAL;
+ port->icount.rx++;
+
+ if (tmp & LPC32XX_HSU_ERROR_DATA) {
+ /* Framing error */
+ writel(LPC32XX_HSU_FE_INT,
+ LPC32XX_HSUART_IIR(port->membase));
+ port->icount.frame++;
+ flag = TTY_FRAME;
+ tty_insert_flip_char(tty, 0, TTY_FRAME);
+ }
+
+ tty_insert_flip_char(tty, (tmp & 0xFF), flag);
+
+ tmp = readl(LPC32XX_HSUART_FIFO(port->membase));
+ }
+ tty_flip_buffer_push(tty);
+ tty_kref_put(tty);
+}
+
+static void __serial_lpc32xx_tx(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->state->xmit;
+ unsigned int tmp;
+
+ if (port->x_char) {
+ writel((u32)port->x_char, LPC32XX_HSUART_FIFO(port->membase));
+ port->icount.tx++;
+ port->x_char = 0;
+ return;
+ }
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port))
+ goto exit_tx;
+
+ /* Transfer data */
+ while (LPC32XX_HSU_TX_LEV(readl(
+ LPC32XX_HSUART_LEVEL(port->membase))) < 64) {
+ writel((u32) xmit->buf[xmit->tail],
+ LPC32XX_HSUART_FIFO(port->membase));
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+exit_tx:
+ if (uart_circ_empty(xmit)) {
+ tmp = readl(LPC32XX_HSUART_CTRL(port->membase));
+ tmp &= ~LPC32XX_HSU_TX_INT_EN;
+ writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
+ }
+}
+
+static irqreturn_t serial_lpc32xx_interrupt(int irq, void *dev_id)
+{
+ struct uart_port *port = dev_id;
+ struct tty_struct *tty = tty_port_tty_get(&port->state->port);
+ u32 status;
+
+ spin_lock(&port->lock);
+
+ /* Read UART status and clear latched interrupts */
+ status = readl(LPC32XX_HSUART_IIR(port->membase));
+
+ if (status & LPC32XX_HSU_BRK_INT) {
+ /* Break received */
+ writel(LPC32XX_HSU_BRK_INT, LPC32XX_HSUART_IIR(port->membase));
+ port->icount.brk++;
+ uart_handle_break(port);
+ }
+
+ /* Framing error */
+ if (status & LPC32XX_HSU_FE_INT)
+ writel(LPC32XX_HSU_FE_INT, LPC32XX_HSUART_IIR(port->membase));
+
+ if (status & LPC32XX_HSU_RX_OE_INT) {
+ /* Receive FIFO overrun */
+ writel(LPC32XX_HSU_RX_OE_INT,
+ LPC32XX_HSUART_IIR(port->membase));
+ port->icount.overrun++;
+ if (tty) {
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ tty_schedule_flip(tty);
+ }
+ }
+
+ /* Data received? */
+ if (status & (LPC32XX_HSU_RX_TIMEOUT_INT | LPC32XX_HSU_RX_TRIG_INT)) {
+ __serial_lpc32xx_rx(port);
+ if (tty)
+ tty_flip_buffer_push(tty);
+ }
+
+ /* Transmit data request? */
+ if ((status & LPC32XX_HSU_TX_INT) && (!uart_tx_stopped(port))) {
+ writel(LPC32XX_HSU_TX_INT, LPC32XX_HSUART_IIR(port->membase));
+ __serial_lpc32xx_tx(port);
+ }
+
+ spin_unlock(&port->lock);
+ tty_kref_put(tty);
+
+ return IRQ_HANDLED;
+}
+
+/* port->lock is not held. */
+static unsigned int serial_lpc32xx_tx_empty(struct uart_port *port)
+{
+ unsigned int ret = 0;
+
+ if (LPC32XX_HSU_TX_LEV(readl(LPC32XX_HSUART_LEVEL(port->membase))) == 0)
+ ret = TIOCSER_TEMT;
+
+ return ret;
+}
+
+/* port->lock held by caller. */
+static void serial_lpc32xx_set_mctrl(struct uart_port *port,
+ unsigned int mctrl)
+{
+ /* No signals are supported on HS UARTs */
+}
+
+/* port->lock is held by caller and interrupts are disabled. */
+static unsigned int serial_lpc32xx_get_mctrl(struct uart_port *port)
+{
+ /* No signals are supported on HS UARTs */
+ return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
+}
+
+/* port->lock held by caller. */
+static void serial_lpc32xx_stop_tx(struct uart_port *port)
+{
+ u32 tmp;
+
+ tmp = readl(LPC32XX_HSUART_CTRL(port->membase));
+ tmp &= ~LPC32XX_HSU_TX_INT_EN;
+ writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
+}
+
+/* port->lock held by caller. */
+static void serial_lpc32xx_start_tx(struct uart_port *port)
+{
+ u32 tmp;
+
+ __serial_lpc32xx_tx(port);
+ tmp = readl(LPC32XX_HSUART_CTRL(port->membase));
+ tmp |= LPC32XX_HSU_TX_INT_EN;
+ writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
+}
+
+/* port->lock held by caller. */
+static void serial_lpc32xx_stop_rx(struct uart_port *port)
+{
+ u32 tmp;
+
+ tmp = readl(LPC32XX_HSUART_CTRL(port->membase));
+ tmp &= ~(LPC32XX_HSU_RX_INT_EN | LPC32XX_HSU_ERR_INT_EN);
+ writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
+
+ writel((LPC32XX_HSU_BRK_INT | LPC32XX_HSU_RX_OE_INT |
+ LPC32XX_HSU_FE_INT), LPC32XX_HSUART_IIR(port->membase));
+}
+
+/* port->lock held by caller. */
+static void serial_lpc32xx_enable_ms(struct uart_port *port)
+{
+ /* Modem status is not supported */
+}
+
+/* port->lock is not held. */
+static void serial_lpc32xx_break_ctl(struct uart_port *port,
+ int break_state)
+{
+ unsigned long flags;
+ u32 tmp;
+
+ spin_lock_irqsave(&port->lock, flags);
+ tmp = readl(LPC32XX_HSUART_CTRL(port->membase));
+ if (break_state != 0)
+ tmp |= LPC32XX_HSU_BREAK;
+ else
+ tmp &= ~LPC32XX_HSU_BREAK;
+ writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/* LPC3250 Errata HSUART.1: Hang workaround via loopback mode on inactivity */
+static void lpc32xx_loopback_set(resource_size_t mapbase, int state)
+{
+ int bit;
+ u32 tmp;
+
+ switch (mapbase) {
+ case LPC32XX_HS_UART1_BASE:
+ bit = 0;
+ break;
+ case LPC32XX_HS_UART2_BASE:
+ bit = 1;
+ break;
+ case LPC32XX_HS_UART7_BASE:
+ bit = 6;
+ break;
+ default:
+ WARN(1, "lpc32xx_hs: Warning: Unknown port at %08x\n", mapbase);
+ return;
+ }
+
+ tmp = readl(LPC32XX_UARTCTL_CLOOP);
+ if (state)
+ tmp |= (1 << bit);
+ else
+ tmp &= ~(1 << bit);
+ writel(tmp, LPC32XX_UARTCTL_CLOOP);
+}
+
+/* port->lock is not held. */
+static int serial_lpc32xx_startup(struct uart_port *port)
+{
+ int retval;
+ unsigned long flags;
+ u32 tmp;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ __serial_uart_flush(port);
+
+ writel((LPC32XX_HSU_TX_INT | LPC32XX_HSU_FE_INT |
+ LPC32XX_HSU_BRK_INT | LPC32XX_HSU_RX_OE_INT),
+ LPC32XX_HSUART_IIR(port->membase));
+
+ writel(0xFF, LPC32XX_HSUART_RATE(port->membase));
+
+ /*
+ * Set receiver timeout, HSU offset of 20, no break, no interrupts,
+ * and default FIFO trigger levels
+ */
+ tmp = LPC32XX_HSU_TX_TL8B | LPC32XX_HSU_RX_TL32B |
+ LPC32XX_HSU_OFFSET(20) | LPC32XX_HSU_TMO_INACT_4B;
+ writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
+
+ lpc32xx_loopback_set(port->mapbase, 0); /* get out of loopback mode */
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ retval = request_irq(port->irq, serial_lpc32xx_interrupt,
+ 0, MODNAME, port);
+ if (!retval)
+ writel((tmp | LPC32XX_HSU_RX_INT_EN | LPC32XX_HSU_ERR_INT_EN),
+ LPC32XX_HSUART_CTRL(port->membase));
+
+ return retval;
+}
+
+/* port->lock is not held. */
+static void serial_lpc32xx_shutdown(struct uart_port *port)
+{
+ u32 tmp;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ tmp = LPC32XX_HSU_TX_TL8B | LPC32XX_HSU_RX_TL32B |
+ LPC32XX_HSU_OFFSET(20) | LPC32XX_HSU_TMO_INACT_4B;
+ writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
+
+ lpc32xx_loopback_set(port->mapbase, 1); /* go to loopback mode */
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ free_irq(port->irq, port);
+}
+
+/* port->lock is not held. */
+static void serial_lpc32xx_set_termios(struct uart_port *port,
+ struct ktermios *termios,
+ struct ktermios *old)
+{
+ unsigned long flags;
+ unsigned int baud, quot;
+ u32 tmp;
+
+ /* Always 8-bit, no parity, 1 stop bit */
+ termios->c_cflag &= ~(CSIZE | CSTOPB | PARENB | PARODD);
+ termios->c_cflag |= CS8;
+
+ termios->c_cflag &= ~(HUPCL | CMSPAR | CLOCAL | CRTSCTS);
+
+ baud = uart_get_baud_rate(port, termios, old, 0,
+ port->uartclk / 14);
+
+ quot = __serial_get_clock_div(port->uartclk, baud);
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* Ignore characters? */
+ tmp = readl(LPC32XX_HSUART_CTRL(port->membase));
+ if ((termios->c_cflag & CREAD) == 0)
+ tmp &= ~(LPC32XX_HSU_RX_INT_EN | LPC32XX_HSU_ERR_INT_EN);
+ else
+ tmp |= LPC32XX_HSU_RX_INT_EN | LPC32XX_HSU_ERR_INT_EN;
+ writel(tmp, LPC32XX_HSUART_CTRL(port->membase));
+
+ writel(quot, LPC32XX_HSUART_RATE(port->membase));
+
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ /* Don't rewrite B0 */
+ if (tty_termios_baud_rate(termios))
+ tty_termios_encode_baud_rate(termios, baud, baud);
+}
+
+static const char *serial_lpc32xx_type(struct uart_port *port)
+{
+ return MODNAME;
+}
+
+static void serial_lpc32xx_release_port(struct uart_port *port)
+{
+ if ((port->iotype == UPIO_MEM32) && (port->mapbase)) {
+ if (port->flags & UPF_IOREMAP) {
+ iounmap(port->membase);
+ port->membase = NULL;
+ }
+
+ release_mem_region(port->mapbase, SZ_4K);
+ }
+}
+
+static int serial_lpc32xx_request_port(struct uart_port *port)
+{
+ int ret = -ENODEV;
+
+ if ((port->iotype == UPIO_MEM32) && (port->mapbase)) {
+ ret = 0;
+
+ if (!request_mem_region(port->mapbase, SZ_4K, MODNAME))
+ ret = -EBUSY;
+ else if (port->flags & UPF_IOREMAP) {
+ port->membase = ioremap(port->mapbase, SZ_4K);
+ if (!port->membase) {
+ release_mem_region(port->mapbase, SZ_4K);
+ ret = -ENOMEM;
+ }
+ }
+ }
+
+ return ret;
+}
+
+static void serial_lpc32xx_config_port(struct uart_port *port, int uflags)
+{
+ int ret;
+
+ ret = serial_lpc32xx_request_port(port);
+ if (ret < 0)
+ return;
+ port->type = PORT_UART00;
+ port->fifosize = 64;
+
+ __serial_uart_flush(port);
+
+ writel((LPC32XX_HSU_TX_INT | LPC32XX_HSU_FE_INT |
+ LPC32XX_HSU_BRK_INT | LPC32XX_HSU_RX_OE_INT),
+ LPC32XX_HSUART_IIR(port->membase));
+
+ writel(0xFF, LPC32XX_HSUART_RATE(port->membase));
+
+ /* Set receiver timeout, HSU offset of 20, no break, no interrupts,
+ and default FIFO trigger levels */
+ writel(LPC32XX_HSU_TX_TL8B | LPC32XX_HSU_RX_TL32B |
+ LPC32XX_HSU_OFFSET(20) | LPC32XX_HSU_TMO_INACT_4B,
+ LPC32XX_HSUART_CTRL(port->membase));
+}
+
+static int serial_lpc32xx_verify_port(struct uart_port *port,
+ struct serial_struct *ser)
+{
+ int ret = 0;
+
+ if (ser->type != PORT_UART00)
+ ret = -EINVAL;
+
+ return ret;
+}
+
+static struct uart_ops serial_lpc32xx_pops = {
+ .tx_empty = serial_lpc32xx_tx_empty,
+ .set_mctrl = serial_lpc32xx_set_mctrl,
+ .get_mctrl = serial_lpc32xx_get_mctrl,
+ .stop_tx = serial_lpc32xx_stop_tx,
+ .start_tx = serial_lpc32xx_start_tx,
+ .stop_rx = serial_lpc32xx_stop_rx,
+ .enable_ms = serial_lpc32xx_enable_ms,
+ .break_ctl = serial_lpc32xx_break_ctl,
+ .startup = serial_lpc32xx_startup,
+ .shutdown = serial_lpc32xx_shutdown,
+ .set_termios = serial_lpc32xx_set_termios,
+ .type = serial_lpc32xx_type,
+ .release_port = serial_lpc32xx_release_port,
+ .request_port = serial_lpc32xx_request_port,
+ .config_port = serial_lpc32xx_config_port,
+ .verify_port = serial_lpc32xx_verify_port,
+};
+
+/*
+ * Register a set of serial devices attached to a platform device
+ */
+static int __devinit serial_hs_lpc32xx_probe(struct platform_device *pdev)
+{
+ struct lpc32xx_hsuart_port *p = &lpc32xx_hs_ports[uarts_registered];
+ int ret = 0;
+ struct resource *res;
+
+ if (uarts_registered >= MAX_PORTS) {
+ dev_err(&pdev->dev,
+ "Error: Number of possible ports exceeded (%d)!\n",
+ uarts_registered + 1);
+ return -ENXIO;
+ }
+
+ memset(p, 0, sizeof(*p));
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev,
+ "Error getting mem resource for HS UART port %d\n",
+ uarts_registered);
+ return -ENXIO;
+ }
+ p->port.mapbase = res->start;
+ p->port.membase = NULL;
+
+ p->port.irq = platform_get_irq(pdev, 0);
+ if (p->port.irq < 0) {
+ dev_err(&pdev->dev, "Error getting irq for HS UART port %d\n",
+ uarts_registered);
+ return p->port.irq;
+ }
+
+ p->port.iotype = UPIO_MEM32;
+ p->port.uartclk = LPC32XX_MAIN_OSC_FREQ;
+ p->port.regshift = 2;
+ p->port.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | UPF_IOREMAP;
+ p->port.dev = &pdev->dev;
+ p->port.ops = &serial_lpc32xx_pops;
+ p->port.line = uarts_registered++;
+ spin_lock_init(&p->port.lock);
+
+ /* send port to loopback mode by default */
+ lpc32xx_loopback_set(p->port.mapbase, 1);
+
+ ret = uart_add_one_port(&lpc32xx_hs_reg, &p->port);
+
+ platform_set_drvdata(pdev, p);
+
+ return ret;
+}
+
+/*
+ * Remove serial ports registered against a platform device.
+ */
+static int __devexit serial_hs_lpc32xx_remove(struct platform_device *pdev)
+{
+ struct lpc32xx_hsuart_port *p = platform_get_drvdata(pdev);
+
+ uart_remove_one_port(&lpc32xx_hs_reg, &p->port);
+
+ return 0;
+}
+
+
+#ifdef CONFIG_PM
+static int serial_hs_lpc32xx_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ struct lpc32xx_hsuart_port *p = platform_get_drvdata(pdev);
+
+ uart_suspend_port(&lpc32xx_hs_reg, &p->port);
+
+ return 0;
+}
+
+static int serial_hs_lpc32xx_resume(struct platform_device *pdev)
+{
+ struct lpc32xx_hsuart_port *p = platform_get_drvdata(pdev);
+
+ uart_resume_port(&lpc32xx_hs_reg, &p->port);
+
+ return 0;
+}
+#else
+#define serial_hs_lpc32xx_suspend NULL
+#define serial_hs_lpc32xx_resume NULL
+#endif
+
+static const struct of_device_id serial_hs_lpc32xx_dt_ids[] = {
+ { .compatible = "nxp,lpc3220-hsuart" },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, serial_hs_lpc32xx_dt_ids);
+
+static struct platform_driver serial_hs_lpc32xx_driver = {
+ .probe = serial_hs_lpc32xx_probe,
+ .remove = __devexit_p(serial_hs_lpc32xx_remove),
+ .suspend = serial_hs_lpc32xx_suspend,
+ .resume = serial_hs_lpc32xx_resume,
+ .driver = {
+ .name = MODNAME,
+ .owner = THIS_MODULE,
+ .of_match_table = serial_hs_lpc32xx_dt_ids,
+ },
+};
+
+static int __init lpc32xx_hsuart_init(void)
+{
+ int ret;
+
+ ret = uart_register_driver(&lpc32xx_hs_reg);
+ if (ret)
+ return ret;
+
+ ret = platform_driver_register(&serial_hs_lpc32xx_driver);
+ if (ret)
+ uart_unregister_driver(&lpc32xx_hs_reg);
+
+ return ret;
+}
+
+static void __exit lpc32xx_hsuart_exit(void)
+{
+ platform_driver_unregister(&serial_hs_lpc32xx_driver);
+ uart_unregister_driver(&lpc32xx_hs_reg);
+}
+
+module_init(lpc32xx_hsuart_init);
+module_exit(lpc32xx_hsuart_exit);
+
+MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>");
+MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
+MODULE_DESCRIPTION("NXP LPC32XX High Speed UART driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/m32r_sio.c
index a0703624d5e..b13949ad340 100644
--- a/drivers/tty/serial/m32r_sio.c
+++ b/drivers/tty/serial/m32r_sio.c
@@ -44,8 +44,6 @@
#include <asm/io.h>
#include <asm/irq.h>
-#define PORT_M32R_BASE PORT_M32R_SIO
-#define PORT_INDEX(x) (x - PORT_M32R_BASE + 1)
#define BAUD_RATE 115200
#include <linux/serial_core.h>
@@ -132,22 +130,6 @@ struct irq_info {
static struct irq_info irq_lists[NR_IRQS];
-/*
- * Here we define the default xmit fifo size used for each type of UART.
- */
-static const struct serial_uart_config uart_config[] = {
- [PORT_UNKNOWN] = {
- .name = "unknown",
- .dfl_xmit_fifo_size = 1,
- .flags = 0,
- },
- [PORT_INDEX(PORT_M32R_SIO)] = {
- .name = "M32RSIO",
- .dfl_xmit_fifo_size = 1,
- .flags = 0,
- },
-};
-
#ifdef CONFIG_SERIAL_M32R_PLDSIO
#define __sio_in(x) inw((unsigned long)(x))
@@ -907,8 +889,7 @@ static void m32r_sio_config_port(struct uart_port *port, int unused)
spin_lock_irqsave(&up->port.lock, flags);
- up->port.type = (PORT_M32R_SIO - PORT_M32R_BASE + 1);
- up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size;
+ up->port.fifosize = 1;
spin_unlock_irqrestore(&up->port.lock, flags);
}
@@ -916,23 +897,11 @@ static void m32r_sio_config_port(struct uart_port *port, int unused)
static int
m32r_sio_verify_port(struct uart_port *port, struct serial_struct *ser)
{
- if (ser->irq >= nr_irqs || ser->irq < 0 ||
- ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
- ser->type >= ARRAY_SIZE(uart_config))
+ if (ser->irq >= nr_irqs || ser->irq < 0 || ser->baud_base < 9600)
return -EINVAL;
return 0;
}
-static const char *
-m32r_sio_type(struct uart_port *port)
-{
- int type = port->type;
-
- if (type >= ARRAY_SIZE(uart_config))
- type = 0;
- return uart_config[type].name;
-}
-
static struct uart_ops m32r_sio_pops = {
.tx_empty = m32r_sio_tx_empty,
.set_mctrl = m32r_sio_set_mctrl,
@@ -946,7 +915,6 @@ static struct uart_ops m32r_sio_pops = {
.shutdown = m32r_sio_shutdown,
.set_termios = m32r_sio_set_termios,
.pm = m32r_sio_pm,
- .type = m32r_sio_type,
.release_port = m32r_sio_release_port,
.request_port = m32r_sio_request_port,
.config_port = m32r_sio_config_port,
diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c
index b4902b99cfd..46043c2521c 100644
--- a/drivers/tty/serial/max3100.c
+++ b/drivers/tty/serial/max3100.c
@@ -910,17 +910,7 @@ static struct spi_driver max3100_driver = {
.resume = max3100_resume,
};
-static int __init max3100_init(void)
-{
- return spi_register_driver(&max3100_driver);
-}
-module_init(max3100_init);
-
-static void __exit max3100_exit(void)
-{
- spi_unregister_driver(&max3100_driver);
-}
-module_exit(max3100_exit);
+module_spi_driver(max3100_driver);
MODULE_DESCRIPTION("MAX3100 driver");
MODULE_AUTHOR("Christian Pellegrin <chripell@evolware.org>");
diff --git a/drivers/tty/serial/max3107.c b/drivers/tty/serial/max3107.c
deleted file mode 100644
index 17c7ba805d9..00000000000
--- a/drivers/tty/serial/max3107.c
+++ /dev/null
@@ -1,1215 +0,0 @@
-/*
- * max3107.c - spi uart protocol driver for Maxim 3107
- * Based on max3100.c
- * by Christian Pellegrin <chripell@evolware.org>
- * and max3110.c
- * by Feng Tang <feng.tang@intel.com>
- *
- * Copyright (C) Aavamobile 2009
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- */
-
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/freezer.h>
-#include <linux/module.h>
-#include "max3107.h"
-
-static const struct baud_table brg26_ext[] = {
- { 300, MAX3107_BRG26_B300 },
- { 600, MAX3107_BRG26_B600 },
- { 1200, MAX3107_BRG26_B1200 },
- { 2400, MAX3107_BRG26_B2400 },
- { 4800, MAX3107_BRG26_B4800 },
- { 9600, MAX3107_BRG26_B9600 },
- { 19200, MAX3107_BRG26_B19200 },
- { 57600, MAX3107_BRG26_B57600 },
- { 115200, MAX3107_BRG26_B115200 },
- { 230400, MAX3107_BRG26_B230400 },
- { 460800, MAX3107_BRG26_B460800 },
- { 921600, MAX3107_BRG26_B921600 },
- { 0, 0 }
-};
-
-static const struct baud_table brg13_int[] = {
- { 300, MAX3107_BRG13_IB300 },
- { 600, MAX3107_BRG13_IB600 },
- { 1200, MAX3107_BRG13_IB1200 },
- { 2400, MAX3107_BRG13_IB2400 },
- { 4800, MAX3107_BRG13_IB4800 },
- { 9600, MAX3107_BRG13_IB9600 },
- { 19200, MAX3107_BRG13_IB19200 },
- { 57600, MAX3107_BRG13_IB57600 },
- { 115200, MAX3107_BRG13_IB115200 },
- { 230400, MAX3107_BRG13_IB230400 },
- { 460800, MAX3107_BRG13_IB460800 },
- { 921600, MAX3107_BRG13_IB921600 },
- { 0, 0 }
-};
-
-static u32 get_new_brg(int baud, struct max3107_port *s)
-{
- int i;
- const struct baud_table *baud_tbl = s->baud_tbl;
-
- for (i = 0; i < 13; i++) {
- if (baud == baud_tbl[i].baud)
- return baud_tbl[i].new_brg;
- }
-
- return 0;
-}
-
-/* Perform SPI transfer for write/read of device register(s) */
-int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len)
-{
- struct spi_message spi_msg;
- struct spi_transfer spi_xfer;
-
- /* Initialize SPI ,message */
- spi_message_init(&spi_msg);
-
- /* Initialize SPI transfer */
- memset(&spi_xfer, 0, sizeof spi_xfer);
- spi_xfer.len = len;
- spi_xfer.tx_buf = tx;
- spi_xfer.rx_buf = rx;
- spi_xfer.speed_hz = MAX3107_SPI_SPEED;
-
- /* Add SPI transfer to SPI message */
- spi_message_add_tail(&spi_xfer, &spi_msg);
-
-#ifdef DBG_TRACE_SPI_DATA
- {
- int i;
- pr_info("tx len %d:\n", spi_xfer.len);
- for (i = 0 ; i < spi_xfer.len && i < 32 ; i++)
- pr_info(" %x", ((u8 *)spi_xfer.tx_buf)[i]);
- pr_info("\n");
- }
-#endif
-
- /* Perform synchronous SPI transfer */
- if (spi_sync(s->spi, &spi_msg)) {
- dev_err(&s->spi->dev, "spi_sync failure\n");
- return -EIO;
- }
-
-#ifdef DBG_TRACE_SPI_DATA
- if (spi_xfer.rx_buf) {
- int i;
- pr_info("rx len %d:\n", spi_xfer.len);
- for (i = 0 ; i < spi_xfer.len && i < 32 ; i++)
- pr_info(" %x", ((u8 *)spi_xfer.rx_buf)[i]);
- pr_info("\n");
- }
-#endif
- return 0;
-}
-EXPORT_SYMBOL_GPL(max3107_rw);
-
-/* Puts received data to circular buffer */
-static void put_data_to_circ_buf(struct max3107_port *s, unsigned char *data,
- int len)
-{
- struct uart_port *port = &s->port;
- struct tty_struct *tty;
-
- if (!port->state)
- return;
-
- tty = port->state->port.tty;
- if (!tty)
- return;
-
- /* Insert received data */
- tty_insert_flip_string(tty, data, len);
- /* Update RX counter */
- port->icount.rx += len;
-}
-
-/* Handle data receiving */
-static void max3107_handlerx(struct max3107_port *s, u16 rxlvl)
-{
- int i;
- int j;
- int len; /* SPI transfer buffer length */
- u16 *buf;
- u8 *valid_str;
-
- if (!s->rx_enabled)
- /* RX is disabled */
- return;
-
- if (rxlvl == 0) {
- /* RX fifo is empty */
- return;
- } else if (rxlvl >= MAX3107_RX_FIFO_SIZE) {
- dev_warn(&s->spi->dev, "Possible RX FIFO overrun %d\n", rxlvl);
- /* Ensure sanity of RX level */
- rxlvl = MAX3107_RX_FIFO_SIZE;
- }
- if ((s->rxbuf == 0) || (s->rxstr == 0)) {
- dev_warn(&s->spi->dev, "Rx buffer/str isn't ready\n");
- return;
- }
- buf = s->rxbuf;
- valid_str = s->rxstr;
- while (rxlvl) {
- pr_debug("rxlvl %d\n", rxlvl);
- /* Clear buffer */
- memset(buf, 0, sizeof(u16) * (MAX3107_RX_FIFO_SIZE + 2));
- len = 0;
- if (s->irqen_reg & MAX3107_IRQ_RXFIFO_BIT) {
- /* First disable RX FIFO interrupt */
- pr_debug("Disabling RX INT\n");
- buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG);
- s->irqen_reg &= ~MAX3107_IRQ_RXFIFO_BIT;
- buf[0] |= s->irqen_reg;
- len++;
- }
- /* Just increase the length by amount of words in FIFO since
- * buffer was zeroed and SPI transfer of 0x0000 means reading
- * from RX FIFO
- */
- len += rxlvl;
- /* Append RX level query */
- buf[len] = MAX3107_RXFIFOLVL_REG;
- len++;
-
- /* Perform the SPI transfer */
- if (max3107_rw(s, (u8 *)buf, (u8 *)buf, len * 2)) {
- dev_err(&s->spi->dev, "SPI transfer for RX h failed\n");
- return;
- }
-
- /* Skip RX FIFO interrupt disabling word if it was added */
- j = ((len - 1) - rxlvl);
- /* Read received words */
- for (i = 0; i < rxlvl; i++, j++)
- valid_str[i] = (u8)buf[j];
- put_data_to_circ_buf(s, valid_str, rxlvl);
- /* Get new RX level */
- rxlvl = (buf[len - 1] & MAX3107_SPI_RX_DATA_MASK);
- }
-
- if (s->rx_enabled) {
- /* RX still enabled, re-enable RX FIFO interrupt */
- pr_debug("Enabling RX INT\n");
- buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG);
- s->irqen_reg |= MAX3107_IRQ_RXFIFO_BIT;
- buf[0] |= s->irqen_reg;
- if (max3107_rw(s, (u8 *)buf, NULL, 2))
- dev_err(&s->spi->dev, "RX FIFO INT enabling failed\n");
- }
-
- /* Push the received data to receivers */
- if (s->port.state->port.tty)
- tty_flip_buffer_push(s->port.state->port.tty);
-}
-
-
-/* Handle data sending */
-static void max3107_handletx(struct max3107_port *s)
-{
- struct circ_buf *xmit = &s->port.state->xmit;
- int i;
- unsigned long flags;
- int len; /* SPI transfer buffer length */
- u16 *buf;
-
- if (!s->tx_fifo_empty)
- /* Don't send more data before previous data is sent */
- return;
-
- if (uart_circ_empty(xmit) || uart_tx_stopped(&s->port))
- /* No data to send or TX is stopped */
- return;
-
- if (!s->txbuf) {
- dev_warn(&s->spi->dev, "Txbuf isn't ready\n");
- return;
- }
- buf = s->txbuf;
- /* Get length of data pending in circular buffer */
- len = uart_circ_chars_pending(xmit);
- if (len) {
- /* Limit to size of TX FIFO */
- if (len > MAX3107_TX_FIFO_SIZE)
- len = MAX3107_TX_FIFO_SIZE;
-
- pr_debug("txlen %d\n", len);
-
- /* Update TX counter */
- s->port.icount.tx += len;
-
- /* TX FIFO will no longer be empty */
- s->tx_fifo_empty = 0;
-
- i = 0;
- if (s->irqen_reg & MAX3107_IRQ_TXEMPTY_BIT) {
- /* First disable TX empty interrupt */
- pr_debug("Disabling TE INT\n");
- buf[i] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG);
- s->irqen_reg &= ~MAX3107_IRQ_TXEMPTY_BIT;
- buf[i] |= s->irqen_reg;
- i++;
- len++;
- }
- /* Add data to send */
- spin_lock_irqsave(&s->port.lock, flags);
- for ( ; i < len ; i++) {
- buf[i] = (MAX3107_WRITE_BIT | MAX3107_THR_REG);
- buf[i] |= ((u16)xmit->buf[xmit->tail] &
- MAX3107_SPI_TX_DATA_MASK);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- }
- spin_unlock_irqrestore(&s->port.lock, flags);
- if (!(s->irqen_reg & MAX3107_IRQ_TXEMPTY_BIT)) {
- /* Enable TX empty interrupt */
- pr_debug("Enabling TE INT\n");
- buf[i] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG);
- s->irqen_reg |= MAX3107_IRQ_TXEMPTY_BIT;
- buf[i] |= s->irqen_reg;
- i++;
- len++;
- }
- if (!s->tx_enabled) {
- /* Enable TX */
- pr_debug("Enable TX\n");
- buf[i] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG);
- spin_lock_irqsave(&s->data_lock, flags);
- s->mode1_reg &= ~MAX3107_MODE1_TXDIS_BIT;
- buf[i] |= s->mode1_reg;
- spin_unlock_irqrestore(&s->data_lock, flags);
- s->tx_enabled = 1;
- i++;
- len++;
- }
-
- /* Perform the SPI transfer */
- if (max3107_rw(s, (u8 *)buf, NULL, len*2)) {
- dev_err(&s->spi->dev,
- "SPI transfer TX handling failed\n");
- return;
- }
- }
-
- /* Indicate wake up if circular buffer is getting low on data */
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(&s->port);
-
-}
-
-/* Handle interrupts
- * Also reads and returns current RX FIFO level
- */
-static u16 handle_interrupt(struct max3107_port *s)
-{
- u16 buf[4]; /* Buffer for SPI transfers */
- u8 irq_status;
- u16 rx_level;
- unsigned long flags;
-
- /* Read IRQ status register */
- buf[0] = MAX3107_IRQSTS_REG;
- /* Read status IRQ status register */
- buf[1] = MAX3107_STS_IRQSTS_REG;
- /* Read LSR IRQ status register */
- buf[2] = MAX3107_LSR_IRQSTS_REG;
- /* Query RX level */
- buf[3] = MAX3107_RXFIFOLVL_REG;
-
- if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 8)) {
- dev_err(&s->spi->dev,
- "SPI transfer for INTR handling failed\n");
- return 0;
- }
-
- irq_status = (u8)buf[0];
- pr_debug("IRQSTS %x\n", irq_status);
- rx_level = (buf[3] & MAX3107_SPI_RX_DATA_MASK);
-
- if (irq_status & MAX3107_IRQ_LSR_BIT) {
- /* LSR interrupt */
- if (buf[2] & MAX3107_LSR_RXTO_BIT)
- /* RX timeout interrupt,
- * handled by normal RX handling
- */
- pr_debug("RX TO INT\n");
- }
-
- if (irq_status & MAX3107_IRQ_TXEMPTY_BIT) {
- /* Tx empty interrupt,
- * disable TX and set tx_fifo_empty flag
- */
- pr_debug("TE INT, disabling TX\n");
- buf[0] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG);
- spin_lock_irqsave(&s->data_lock, flags);
- s->mode1_reg |= MAX3107_MODE1_TXDIS_BIT;
- buf[0] |= s->mode1_reg;
- spin_unlock_irqrestore(&s->data_lock, flags);
- if (max3107_rw(s, (u8 *)buf, NULL, 2))
- dev_err(&s->spi->dev, "SPI transfer TX dis failed\n");
- s->tx_enabled = 0;
- s->tx_fifo_empty = 1;
- }
-
- if (irq_status & MAX3107_IRQ_RXFIFO_BIT)
- /* RX FIFO interrupt,
- * handled by normal RX handling
- */
- pr_debug("RFIFO INT\n");
-
- /* Return RX level */
- return rx_level;
-}
-
-/* Trigger work thread*/
-static void max3107_dowork(struct max3107_port *s)
-{
- if (!work_pending(&s->work) && !freezing(current) && !s->suspended)
- queue_work(s->workqueue, &s->work);
- else
- dev_warn(&s->spi->dev, "interrup isn't serviced normally!\n");
-}
-
-/* Work thread */
-static void max3107_work(struct work_struct *w)
-{
- struct max3107_port *s = container_of(w, struct max3107_port, work);
- u16 rxlvl = 0;
- int len; /* SPI transfer buffer length */
- u16 buf[5]; /* Buffer for SPI transfers */
- unsigned long flags;
-
- /* Start by reading current RX FIFO level */
- buf[0] = MAX3107_RXFIFOLVL_REG;
- if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
- dev_err(&s->spi->dev, "SPI transfer RX lev failed\n");
- rxlvl = 0;
- } else {
- rxlvl = (buf[0] & MAX3107_SPI_RX_DATA_MASK);
- }
-
- do {
- pr_debug("rxlvl %d\n", rxlvl);
-
- /* Handle RX */
- max3107_handlerx(s, rxlvl);
- rxlvl = 0;
-
- if (s->handle_irq) {
- /* Handle pending interrupts
- * We also get new RX FIFO level since new data may
- * have been received while pushing received data to
- * receivers
- */
- s->handle_irq = 0;
- rxlvl = handle_interrupt(s);
- }
-
- /* Handle TX */
- max3107_handletx(s);
-
- /* Handle configuration changes */
- len = 0;
- spin_lock_irqsave(&s->data_lock, flags);
- if (s->mode1_commit) {
- pr_debug("mode1_commit\n");
- buf[len] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG);
- buf[len++] |= s->mode1_reg;
- s->mode1_commit = 0;
- }
- if (s->lcr_commit) {
- pr_debug("lcr_commit\n");
- buf[len] = (MAX3107_WRITE_BIT | MAX3107_LCR_REG);
- buf[len++] |= s->lcr_reg;
- s->lcr_commit = 0;
- }
- if (s->brg_commit) {
- pr_debug("brg_commit\n");
- buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVMSB_REG);
- buf[len++] |= ((s->brg_cfg >> 16) &
- MAX3107_SPI_TX_DATA_MASK);
- buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVLSB_REG);
- buf[len++] |= ((s->brg_cfg >> 8) &
- MAX3107_SPI_TX_DATA_MASK);
- buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGCFG_REG);
- buf[len++] |= ((s->brg_cfg) & 0xff);
- s->brg_commit = 0;
- }
- spin_unlock_irqrestore(&s->data_lock, flags);
-
- if (len > 0) {
- if (max3107_rw(s, (u8 *)buf, NULL, len * 2))
- dev_err(&s->spi->dev,
- "SPI transfer config failed\n");
- }
-
- /* Reloop if interrupt handling indicated data in RX FIFO */
- } while (rxlvl);
-
-}
-
-/* Set sleep mode */
-static void max3107_set_sleep(struct max3107_port *s, int mode)
-{
- u16 buf[1]; /* Buffer for SPI transfer */
- unsigned long flags;
- pr_debug("enter, mode %d\n", mode);
-
- buf[0] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG);
- spin_lock_irqsave(&s->data_lock, flags);
- switch (mode) {
- case MAX3107_DISABLE_FORCED_SLEEP:
- s->mode1_reg &= ~MAX3107_MODE1_FORCESLEEP_BIT;
- break;
- case MAX3107_ENABLE_FORCED_SLEEP:
- s->mode1_reg |= MAX3107_MODE1_FORCESLEEP_BIT;
- break;
- case MAX3107_DISABLE_AUTOSLEEP:
- s->mode1_reg &= ~MAX3107_MODE1_AUTOSLEEP_BIT;
- break;
- case MAX3107_ENABLE_AUTOSLEEP:
- s->mode1_reg |= MAX3107_MODE1_AUTOSLEEP_BIT;
- break;
- default:
- spin_unlock_irqrestore(&s->data_lock, flags);
- dev_warn(&s->spi->dev, "invalid sleep mode\n");
- return;
- }
- buf[0] |= s->mode1_reg;
- spin_unlock_irqrestore(&s->data_lock, flags);
-
- if (max3107_rw(s, (u8 *)buf, NULL, 2))
- dev_err(&s->spi->dev, "SPI transfer sleep mode failed\n");
-
- if (mode == MAX3107_DISABLE_AUTOSLEEP ||
- mode == MAX3107_DISABLE_FORCED_SLEEP)
- msleep(MAX3107_WAKEUP_DELAY);
-}
-
-/* Perform full register initialization */
-static void max3107_register_init(struct max3107_port *s)
-{
- u16 buf[11]; /* Buffer for SPI transfers */
-
- /* 1. Configure baud rate, 9600 as default */
- s->baud = 9600;
- /* the below is default*/
- if (s->ext_clk) {
- s->brg_cfg = MAX3107_BRG26_B9600;
- s->baud_tbl = (struct baud_table *)brg26_ext;
- } else {
- s->brg_cfg = MAX3107_BRG13_IB9600;
- s->baud_tbl = (struct baud_table *)brg13_int;
- }
-
- if (s->pdata->init)
- s->pdata->init(s);
-
- buf[0] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVMSB_REG)
- | ((s->brg_cfg >> 16) & MAX3107_SPI_TX_DATA_MASK);
- buf[1] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVLSB_REG)
- | ((s->brg_cfg >> 8) & MAX3107_SPI_TX_DATA_MASK);
- buf[2] = (MAX3107_WRITE_BIT | MAX3107_BRGCFG_REG)
- | ((s->brg_cfg) & 0xff);
-
- /* 2. Configure LCR register, 8N1 mode by default */
- s->lcr_reg = MAX3107_LCR_WORD_LEN_8;
- buf[3] = (MAX3107_WRITE_BIT | MAX3107_LCR_REG)
- | s->lcr_reg;
-
- /* 3. Configure MODE 1 register */
- s->mode1_reg = 0;
- /* Enable IRQ pin */
- s->mode1_reg |= MAX3107_MODE1_IRQSEL_BIT;
- /* Disable TX */
- s->mode1_reg |= MAX3107_MODE1_TXDIS_BIT;
- s->tx_enabled = 0;
- /* RX is enabled */
- s->rx_enabled = 1;
- buf[4] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG)
- | s->mode1_reg;
-
- /* 4. Configure MODE 2 register */
- buf[5] = (MAX3107_WRITE_BIT | MAX3107_MODE2_REG);
- if (s->loopback) {
- /* Enable loopback */
- buf[5] |= MAX3107_MODE2_LOOPBACK_BIT;
- }
- /* Reset FIFOs */
- buf[5] |= MAX3107_MODE2_FIFORST_BIT;
- s->tx_fifo_empty = 1;
-
- /* 5. Configure FIFO trigger level register */
- buf[6] = (MAX3107_WRITE_BIT | MAX3107_FIFOTRIGLVL_REG);
- /* RX FIFO trigger for 16 words, TX FIFO trigger not used */
- buf[6] |= (MAX3107_FIFOTRIGLVL_RX(16) | MAX3107_FIFOTRIGLVL_TX(0));
-
- /* 6. Configure flow control levels */
- buf[7] = (MAX3107_WRITE_BIT | MAX3107_FLOWLVL_REG);
- /* Flow control halt level 96, resume level 48 */
- buf[7] |= (MAX3107_FLOWLVL_RES(48) | MAX3107_FLOWLVL_HALT(96));
-
- /* 7. Configure flow control */
- buf[8] = (MAX3107_WRITE_BIT | MAX3107_FLOWCTRL_REG);
- /* Enable auto CTS and auto RTS flow control */
- buf[8] |= (MAX3107_FLOWCTRL_AUTOCTS_BIT | MAX3107_FLOWCTRL_AUTORTS_BIT);
-
- /* 8. Configure RX timeout register */
- buf[9] = (MAX3107_WRITE_BIT | MAX3107_RXTO_REG);
- /* Timeout after 48 character intervals */
- buf[9] |= 0x0030;
-
- /* 9. Configure LSR interrupt enable register */
- buf[10] = (MAX3107_WRITE_BIT | MAX3107_LSR_IRQEN_REG);
- /* Enable RX timeout interrupt */
- buf[10] |= MAX3107_LSR_RXTO_BIT;
-
- /* Perform SPI transfer */
- if (max3107_rw(s, (u8 *)buf, NULL, 22))
- dev_err(&s->spi->dev, "SPI transfer for init failed\n");
-
- /* 10. Clear IRQ status register by reading it */
- buf[0] = MAX3107_IRQSTS_REG;
-
- /* 11. Configure interrupt enable register */
- /* Enable LSR interrupt */
- s->irqen_reg = MAX3107_IRQ_LSR_BIT;
- /* Enable RX FIFO interrupt */
- s->irqen_reg |= MAX3107_IRQ_RXFIFO_BIT;
- buf[1] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG)
- | s->irqen_reg;
-
- /* 12. Clear FIFO reset that was set in step 6 */
- buf[2] = (MAX3107_WRITE_BIT | MAX3107_MODE2_REG);
- if (s->loopback) {
- /* Keep loopback enabled */
- buf[2] |= MAX3107_MODE2_LOOPBACK_BIT;
- }
-
- /* Perform SPI transfer */
- if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 6))
- dev_err(&s->spi->dev, "SPI transfer for init failed\n");
-
-}
-
-/* IRQ handler */
-static irqreturn_t max3107_irq(int irqno, void *dev_id)
-{
- struct max3107_port *s = dev_id;
-
- if (irqno != s->spi->irq) {
- /* Unexpected IRQ */
- return IRQ_NONE;
- }
-
- /* Indicate irq */
- s->handle_irq = 1;
-
- /* Trigger work thread */
- max3107_dowork(s);
-
- return IRQ_HANDLED;
-}
-
-/* HW suspension function
- *
- * Currently autosleep is used to decrease current consumption, alternative
- * approach would be to set the chip to reset mode if UART is not being
- * used but that would mess the GPIOs
- *
- */
-void max3107_hw_susp(struct max3107_port *s, int suspend)
-{
- pr_debug("enter, suspend %d\n", suspend);
-
- if (suspend) {
- /* Suspend requested,
- * enable autosleep to decrease current consumption
- */
- s->suspended = 1;
- max3107_set_sleep(s, MAX3107_ENABLE_AUTOSLEEP);
- } else {
- /* Resume requested,
- * disable autosleep
- */
- s->suspended = 0;
- max3107_set_sleep(s, MAX3107_DISABLE_AUTOSLEEP);
- }
-}
-EXPORT_SYMBOL_GPL(max3107_hw_susp);
-
-/* Modem status IRQ enabling */
-static void max3107_enable_ms(struct uart_port *port)
-{
- /* Modem status not supported */
-}
-
-/* Data send function */
-static void max3107_start_tx(struct uart_port *port)
-{
- struct max3107_port *s = container_of(port, struct max3107_port, port);
-
- /* Trigger work thread for sending data */
- max3107_dowork(s);
-}
-
-/* Function for checking that there is no pending transfers */
-static unsigned int max3107_tx_empty(struct uart_port *port)
-{
- struct max3107_port *s = container_of(port, struct max3107_port, port);
-
- pr_debug("returning %d\n",
- (s->tx_fifo_empty && uart_circ_empty(&s->port.state->xmit)));
- return s->tx_fifo_empty && uart_circ_empty(&s->port.state->xmit);
-}
-
-/* Function for stopping RX */
-static void max3107_stop_rx(struct uart_port *port)
-{
- struct max3107_port *s = container_of(port, struct max3107_port, port);
- unsigned long flags;
-
- /* Set RX disabled in MODE 1 register */
- spin_lock_irqsave(&s->data_lock, flags);
- s->mode1_reg |= MAX3107_MODE1_RXDIS_BIT;
- s->mode1_commit = 1;
- spin_unlock_irqrestore(&s->data_lock, flags);
- /* Set RX disabled */
- s->rx_enabled = 0;
- /* Trigger work thread for doing the actual configuration change */
- max3107_dowork(s);
-}
-
-/* Function for returning control pin states */
-static unsigned int max3107_get_mctrl(struct uart_port *port)
-{
- /* DCD and DSR are not wired and CTS/RTS is handled automatically
- * so just indicate DSR and CAR asserted
- */
- return TIOCM_DSR | TIOCM_CAR;
-}
-
-/* Function for setting control pin states */
-static void max3107_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
- /* DCD and DSR are not wired and CTS/RTS is hadnled automatically
- * so do nothing
- */
-}
-
-/* Function for configuring UART parameters */
-static void max3107_set_termios(struct uart_port *port,
- struct ktermios *termios,
- struct ktermios *old)
-{
- struct max3107_port *s = container_of(port, struct max3107_port, port);
- struct tty_struct *tty;
- int baud;
- u16 new_lcr = 0;
- u32 new_brg = 0;
- unsigned long flags;
-
- if (!port->state)
- return;
-
- tty = port->state->port.tty;
- if (!tty)
- return;
-
- /* Get new LCR register values */
- /* Word size */
- if ((termios->c_cflag & CSIZE) == CS7)
- new_lcr |= MAX3107_LCR_WORD_LEN_7;
- else
- new_lcr |= MAX3107_LCR_WORD_LEN_8;
-
- /* Parity */
- if (termios->c_cflag & PARENB) {
- new_lcr |= MAX3107_LCR_PARITY_BIT;
- if (!(termios->c_cflag & PARODD))
- new_lcr |= MAX3107_LCR_EVENPARITY_BIT;
- }
-
- /* Stop bits */
- if (termios->c_cflag & CSTOPB) {
- /* 2 stop bits */
- new_lcr |= MAX3107_LCR_STOPLEN_BIT;
- }
-
- /* Mask termios capabilities we don't support */
- termios->c_cflag &= ~CMSPAR;
-
- /* Set status ignore mask */
- s->port.ignore_status_mask = 0;
- if (termios->c_iflag & IGNPAR)
- s->port.ignore_status_mask |= MAX3107_ALL_ERRORS;
-
- /* Set low latency to immediately handle pushed data */
- s->port.state->port.tty->low_latency = 1;
-
- /* Get new baud rate generator configuration */
- baud = tty_get_baud_rate(tty);
-
- spin_lock_irqsave(&s->data_lock, flags);
- new_brg = get_new_brg(baud, s);
- /* if can't find the corrent config, use previous */
- if (!new_brg) {
- baud = s->baud;
- new_brg = s->brg_cfg;
- }
- spin_unlock_irqrestore(&s->data_lock, flags);
- tty_termios_encode_baud_rate(termios, baud, baud);
- s->baud = baud;
-
- /* Update timeout according to new baud rate */
- uart_update_timeout(port, termios->c_cflag, baud);
-
- spin_lock_irqsave(&s->data_lock, flags);
- if (s->lcr_reg != new_lcr) {
- s->lcr_reg = new_lcr;
- s->lcr_commit = 1;
- }
- if (s->brg_cfg != new_brg) {
- s->brg_cfg = new_brg;
- s->brg_commit = 1;
- }
- spin_unlock_irqrestore(&s->data_lock, flags);
-
- /* Trigger work thread for doing the actual configuration change */
- max3107_dowork(s);
-}
-
-/* Port shutdown function */
-static void max3107_shutdown(struct uart_port *port)
-{
- struct max3107_port *s = container_of(port, struct max3107_port, port);
-
- if (s->suspended && s->pdata->hw_suspend)
- s->pdata->hw_suspend(s, 0);
-
- /* Free the interrupt */
- free_irq(s->spi->irq, s);
-
- if (s->workqueue) {
- /* Flush and destroy work queue */
- flush_workqueue(s->workqueue);
- destroy_workqueue(s->workqueue);
- s->workqueue = NULL;
- }
-
- /* Suspend HW */
- if (s->pdata->hw_suspend)
- s->pdata->hw_suspend(s, 1);
-}
-
-/* Port startup function */
-static int max3107_startup(struct uart_port *port)
-{
- struct max3107_port *s = container_of(port, struct max3107_port, port);
-
- /* Initialize work queue */
- s->workqueue = create_freezable_workqueue("max3107");
- if (!s->workqueue) {
- dev_err(&s->spi->dev, "Workqueue creation failed\n");
- return -EBUSY;
- }
- INIT_WORK(&s->work, max3107_work);
-
- /* Setup IRQ */
- if (request_irq(s->spi->irq, max3107_irq, IRQF_TRIGGER_FALLING,
- "max3107", s)) {
- dev_err(&s->spi->dev, "IRQ reguest failed\n");
- destroy_workqueue(s->workqueue);
- s->workqueue = NULL;
- return -EBUSY;
- }
-
- /* Resume HW */
- if (s->pdata->hw_suspend)
- s->pdata->hw_suspend(s, 0);
-
- /* Init registers */
- max3107_register_init(s);
-
- return 0;
-}
-
-/* Port type function */
-static const char *max3107_type(struct uart_port *port)
-{
- struct max3107_port *s = container_of(port, struct max3107_port, port);
- return s->spi->modalias;
-}
-
-/* Port release function */
-static void max3107_release_port(struct uart_port *port)
-{
- /* Do nothing */
-}
-
-/* Port request function */
-static int max3107_request_port(struct uart_port *port)
-{
- /* Do nothing */
- return 0;
-}
-
-/* Port config function */
-static void max3107_config_port(struct uart_port *port, int flags)
-{
- struct max3107_port *s = container_of(port, struct max3107_port, port);
- s->port.type = PORT_MAX3107;
-}
-
-/* Port verify function */
-static int max3107_verify_port(struct uart_port *port,
- struct serial_struct *ser)
-{
- if (ser->type == PORT_UNKNOWN || ser->type == PORT_MAX3107)
- return 0;
-
- return -EINVAL;
-}
-
-/* Port stop TX function */
-static void max3107_stop_tx(struct uart_port *port)
-{
- /* Do nothing */
-}
-
-/* Port break control function */
-static void max3107_break_ctl(struct uart_port *port, int break_state)
-{
- /* We don't support break control, do nothing */
-}
-
-
-/* Port functions */
-static struct uart_ops max3107_ops = {
- .tx_empty = max3107_tx_empty,
- .set_mctrl = max3107_set_mctrl,
- .get_mctrl = max3107_get_mctrl,
- .stop_tx = max3107_stop_tx,
- .start_tx = max3107_start_tx,
- .stop_rx = max3107_stop_rx,
- .enable_ms = max3107_enable_ms,
- .break_ctl = max3107_break_ctl,
- .startup = max3107_startup,
- .shutdown = max3107_shutdown,
- .set_termios = max3107_set_termios,
- .type = max3107_type,
- .release_port = max3107_release_port,
- .request_port = max3107_request_port,
- .config_port = max3107_config_port,
- .verify_port = max3107_verify_port,
-};
-
-/* UART driver data */
-static struct uart_driver max3107_uart_driver = {
- .owner = THIS_MODULE,
- .driver_name = "ttyMAX",
- .dev_name = "ttyMAX",
- .nr = 1,
-};
-
-static int driver_registered = 0;
-
-
-
-/* 'Generic' platform data */
-static struct max3107_plat generic_plat_data = {
- .loopback = 0,
- .ext_clk = 1,
- .hw_suspend = max3107_hw_susp,
- .polled_mode = 0,
- .poll_time = 0,
-};
-
-
-/*******************************************************************/
-
-/**
- * max3107_probe - SPI bus probe entry point
- * @spi: the spi device
- *
- * SPI wants us to probe this device and if appropriate claim it.
- * Perform any platform specific requirements and then initialise
- * the device.
- */
-
-int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata)
-{
- struct max3107_port *s;
- u16 buf[2]; /* Buffer for SPI transfers */
- int retval;
-
- pr_info("enter max3107 probe\n");
-
- /* Allocate port structure */
- s = kzalloc(sizeof(*s), GFP_KERNEL);
- if (!s) {
- pr_err("Allocating port structure failed\n");
- return -ENOMEM;
- }
-
- s->pdata = pdata;
-
- /* SPI Rx buffer
- * +2 for RX FIFO interrupt
- * disabling and RX level query
- */
- s->rxbuf = kzalloc(sizeof(u16) * (MAX3107_RX_FIFO_SIZE+2), GFP_KERNEL);
- if (!s->rxbuf) {
- pr_err("Allocating RX buffer failed\n");
- retval = -ENOMEM;
- goto err_free4;
- }
- s->rxstr = kzalloc(sizeof(u8) * MAX3107_RX_FIFO_SIZE, GFP_KERNEL);
- if (!s->rxstr) {
- pr_err("Allocating RX buffer failed\n");
- retval = -ENOMEM;
- goto err_free3;
- }
- /* SPI Tx buffer
- * SPI transfer buffer
- * +3 for TX FIFO empty
- * interrupt disabling and
- * enabling and TX enabling
- */
- s->txbuf = kzalloc(sizeof(u16) * MAX3107_TX_FIFO_SIZE + 3, GFP_KERNEL);
- if (!s->txbuf) {
- pr_err("Allocating TX buffer failed\n");
- retval = -ENOMEM;
- goto err_free2;
- }
- /* Initialize shared data lock */
- spin_lock_init(&s->data_lock);
-
- /* SPI intializations */
- dev_set_drvdata(&spi->dev, s);
- spi->mode = SPI_MODE_0;
- spi->dev.platform_data = pdata;
- spi->bits_per_word = 16;
- s->ext_clk = pdata->ext_clk;
- s->loopback = pdata->loopback;
- spi_setup(spi);
- s->spi = spi;
-
- /* Check REV ID to ensure we are talking to what we expect */
- buf[0] = MAX3107_REVID_REG;
- if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
- dev_err(&s->spi->dev, "SPI transfer for REVID read failed\n");
- retval = -EIO;
- goto err_free1;
- }
- if ((buf[0] & MAX3107_SPI_RX_DATA_MASK) != MAX3107_REVID1 &&
- (buf[0] & MAX3107_SPI_RX_DATA_MASK) != MAX3107_REVID2) {
- dev_err(&s->spi->dev, "REVID %x does not match\n",
- (buf[0] & MAX3107_SPI_RX_DATA_MASK));
- retval = -ENODEV;
- goto err_free1;
- }
-
- /* Disable all interrupts */
- buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG | 0x0000);
- buf[0] |= 0x0000;
-
- /* Configure clock source */
- buf[1] = (MAX3107_WRITE_BIT | MAX3107_CLKSRC_REG);
- if (s->ext_clk) {
- /* External clock */
- buf[1] |= MAX3107_CLKSRC_EXTCLK_BIT;
- }
-
- /* PLL bypass ON */
- buf[1] |= MAX3107_CLKSRC_PLLBYP_BIT;
-
- /* Perform SPI transfer */
- if (max3107_rw(s, (u8 *)buf, NULL, 4)) {
- dev_err(&s->spi->dev, "SPI transfer for init failed\n");
- retval = -EIO;
- goto err_free1;
- }
-
- /* Register UART driver */
- if (!driver_registered) {
- retval = uart_register_driver(&max3107_uart_driver);
- if (retval) {
- dev_err(&s->spi->dev, "Registering UART driver failed\n");
- goto err_free1;
- }
- driver_registered = 1;
- }
-
- /* Initialize UART port data */
- s->port.fifosize = 128;
- s->port.ops = &max3107_ops;
- s->port.line = 0;
- s->port.dev = &spi->dev;
- s->port.uartclk = 9600;
- s->port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
- s->port.irq = s->spi->irq;
- s->port.type = PORT_MAX3107;
-
- /* Add UART port */
- retval = uart_add_one_port(&max3107_uart_driver, &s->port);
- if (retval < 0) {
- dev_err(&s->spi->dev, "Adding UART port failed\n");
- goto err_free1;
- }
-
- if (pdata->configure) {
- retval = pdata->configure(s);
- if (retval < 0)
- goto err_free1;
- }
-
- /* Go to suspend mode */
- if (pdata->hw_suspend)
- pdata->hw_suspend(s, 1);
-
- return 0;
-
-err_free1:
- kfree(s->txbuf);
-err_free2:
- kfree(s->rxstr);
-err_free3:
- kfree(s->rxbuf);
-err_free4:
- kfree(s);
- return retval;
-}
-EXPORT_SYMBOL_GPL(max3107_probe);
-
-/* Driver remove function */
-int max3107_remove(struct spi_device *spi)
-{
- struct max3107_port *s = dev_get_drvdata(&spi->dev);
-
- pr_info("enter max3107 remove\n");
-
- /* Remove port */
- if (uart_remove_one_port(&max3107_uart_driver, &s->port))
- dev_warn(&s->spi->dev, "Removing UART port failed\n");
-
-
- /* Free TxRx buffer */
- kfree(s->rxbuf);
- kfree(s->rxstr);
- kfree(s->txbuf);
-
- /* Free port structure */
- kfree(s);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(max3107_remove);
-
-/* Driver suspend function */
-int max3107_suspend(struct spi_device *spi, pm_message_t state)
-{
-#ifdef CONFIG_PM
- struct max3107_port *s = dev_get_drvdata(&spi->dev);
-
- pr_debug("enter suspend\n");
-
- /* Suspend UART port */
- uart_suspend_port(&max3107_uart_driver, &s->port);
-
- /* Go to suspend mode */
- if (s->pdata->hw_suspend)
- s->pdata->hw_suspend(s, 1);
-#endif /* CONFIG_PM */
- return 0;
-}
-EXPORT_SYMBOL_GPL(max3107_suspend);
-
-/* Driver resume function */
-int max3107_resume(struct spi_device *spi)
-{
-#ifdef CONFIG_PM
- struct max3107_port *s = dev_get_drvdata(&spi->dev);
-
- pr_debug("enter resume\n");
-
- /* Resume from suspend */
- if (s->pdata->hw_suspend)
- s->pdata->hw_suspend(s, 0);
-
- /* Resume UART port */
- uart_resume_port(&max3107_uart_driver, &s->port);
-#endif /* CONFIG_PM */
- return 0;
-}
-EXPORT_SYMBOL_GPL(max3107_resume);
-
-static int max3107_probe_generic(struct spi_device *spi)
-{
- return max3107_probe(spi, &generic_plat_data);
-}
-
-/* Spi driver data */
-static struct spi_driver max3107_driver = {
- .driver = {
- .name = "max3107",
- .owner = THIS_MODULE,
- },
- .probe = max3107_probe_generic,
- .remove = __devexit_p(max3107_remove),
- .suspend = max3107_suspend,
- .resume = max3107_resume,
-};
-
-/* Driver init function */
-static int __init max3107_init(void)
-{
- pr_info("enter max3107 init\n");
- return spi_register_driver(&max3107_driver);
-}
-
-/* Driver exit function */
-static void __exit max3107_exit(void)
-{
- pr_info("enter max3107 exit\n");
- /* Unregister UART driver */
- if (driver_registered)
- uart_unregister_driver(&max3107_uart_driver);
- spi_unregister_driver(&max3107_driver);
-}
-
-module_init(max3107_init);
-module_exit(max3107_exit);
-
-MODULE_DESCRIPTION("MAX3107 driver");
-MODULE_AUTHOR("Aavamobile");
-MODULE_ALIAS("spi:max3107");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/serial/max3107.h b/drivers/tty/serial/max3107.h
deleted file mode 100644
index 8415fc723b9..00000000000
--- a/drivers/tty/serial/max3107.h
+++ /dev/null
@@ -1,441 +0,0 @@
-/*
- * max3107.h - spi uart protocol driver header for Maxim 3107
- *
- * Copyright (C) Aavamobile 2009
- * Based on serial_max3100.h by Christian Pellegrin
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef _MAX3107_H
-#define _MAX3107_H
-
-/* Serial error status definitions */
-#define MAX3107_PARITY_ERROR 1
-#define MAX3107_FRAME_ERROR 2
-#define MAX3107_OVERRUN_ERROR 4
-#define MAX3107_ALL_ERRORS (MAX3107_PARITY_ERROR | \
- MAX3107_FRAME_ERROR | \
- MAX3107_OVERRUN_ERROR)
-
-/* GPIO definitions */
-#define MAX3107_GPIO_BASE 88
-#define MAX3107_GPIO_COUNT 4
-
-
-/* GPIO connected to chip's reset pin */
-#define MAX3107_RESET_GPIO 87
-
-
-/* Chip reset delay */
-#define MAX3107_RESET_DELAY 10
-
-/* Chip wakeup delay */
-#define MAX3107_WAKEUP_DELAY 50
-
-
-/* Sleep mode definitions */
-#define MAX3107_DISABLE_FORCED_SLEEP 0
-#define MAX3107_ENABLE_FORCED_SLEEP 1
-#define MAX3107_DISABLE_AUTOSLEEP 2
-#define MAX3107_ENABLE_AUTOSLEEP 3
-
-
-/* Definitions for register access with SPI transfers
- *
- * SPI transfer format:
- *
- * Master to slave bits xzzzzzzzyyyyyyyy
- * Slave to master bits aaaaaaaabbbbbbbb
- *
- * where:
- * x = 0 for reads, 1 for writes
- * z = register address
- * y = new register value if write, 0 if read
- * a = unspecified
- * b = register value if read, unspecified if write
- */
-
-/* SPI speed */
-#define MAX3107_SPI_SPEED (3125000 * 2)
-
-/* Write bit */
-#define MAX3107_WRITE_BIT (1 << 15)
-
-/* SPI TX data mask */
-#define MAX3107_SPI_RX_DATA_MASK (0x00ff)
-
-/* SPI RX data mask */
-#define MAX3107_SPI_TX_DATA_MASK (0x00ff)
-
-/* Register access masks */
-#define MAX3107_RHR_REG (0x0000) /* RX FIFO */
-#define MAX3107_THR_REG (0x0000) /* TX FIFO */
-#define MAX3107_IRQEN_REG (0x0100) /* IRQ enable */
-#define MAX3107_IRQSTS_REG (0x0200) /* IRQ status */
-#define MAX3107_LSR_IRQEN_REG (0x0300) /* LSR IRQ enable */
-#define MAX3107_LSR_IRQSTS_REG (0x0400) /* LSR IRQ status */
-#define MAX3107_SPCHR_IRQEN_REG (0x0500) /* Special char IRQ enable */
-#define MAX3107_SPCHR_IRQSTS_REG (0x0600) /* Special char IRQ status */
-#define MAX3107_STS_IRQEN_REG (0x0700) /* Status IRQ enable */
-#define MAX3107_STS_IRQSTS_REG (0x0800) /* Status IRQ status */
-#define MAX3107_MODE1_REG (0x0900) /* MODE1 */
-#define MAX3107_MODE2_REG (0x0a00) /* MODE2 */
-#define MAX3107_LCR_REG (0x0b00) /* LCR */
-#define MAX3107_RXTO_REG (0x0c00) /* RX timeout */
-#define MAX3107_HDPIXDELAY_REG (0x0d00) /* Auto transceiver delays */
-#define MAX3107_IRDA_REG (0x0e00) /* IRDA settings */
-#define MAX3107_FLOWLVL_REG (0x0f00) /* Flow control levels */
-#define MAX3107_FIFOTRIGLVL_REG (0x1000) /* FIFO IRQ trigger levels */
-#define MAX3107_TXFIFOLVL_REG (0x1100) /* TX FIFO level */
-#define MAX3107_RXFIFOLVL_REG (0x1200) /* RX FIFO level */
-#define MAX3107_FLOWCTRL_REG (0x1300) /* Flow control */
-#define MAX3107_XON1_REG (0x1400) /* XON1 character */
-#define MAX3107_XON2_REG (0x1500) /* XON2 character */
-#define MAX3107_XOFF1_REG (0x1600) /* XOFF1 character */
-#define MAX3107_XOFF2_REG (0x1700) /* XOFF2 character */
-#define MAX3107_GPIOCFG_REG (0x1800) /* GPIO config */
-#define MAX3107_GPIODATA_REG (0x1900) /* GPIO data */
-#define MAX3107_PLLCFG_REG (0x1a00) /* PLL config */
-#define MAX3107_BRGCFG_REG (0x1b00) /* Baud rate generator conf */
-#define MAX3107_BRGDIVLSB_REG (0x1c00) /* Baud rate divisor LSB */
-#define MAX3107_BRGDIVMSB_REG (0x1d00) /* Baud rate divisor MSB */
-#define MAX3107_CLKSRC_REG (0x1e00) /* Clock source */
-#define MAX3107_REVID_REG (0x1f00) /* Revision identification */
-
-/* IRQ register bits */
-#define MAX3107_IRQ_LSR_BIT (1 << 0) /* LSR interrupt */
-#define MAX3107_IRQ_SPCHR_BIT (1 << 1) /* Special char interrupt */
-#define MAX3107_IRQ_STS_BIT (1 << 2) /* Status interrupt */
-#define MAX3107_IRQ_RXFIFO_BIT (1 << 3) /* RX FIFO interrupt */
-#define MAX3107_IRQ_TXFIFO_BIT (1 << 4) /* TX FIFO interrupt */
-#define MAX3107_IRQ_TXEMPTY_BIT (1 << 5) /* TX FIFO empty interrupt */
-#define MAX3107_IRQ_RXEMPTY_BIT (1 << 6) /* RX FIFO empty interrupt */
-#define MAX3107_IRQ_CTS_BIT (1 << 7) /* CTS interrupt */
-
-/* LSR register bits */
-#define MAX3107_LSR_RXTO_BIT (1 << 0) /* RX timeout */
-#define MAX3107_LSR_RXOVR_BIT (1 << 1) /* RX overrun */
-#define MAX3107_LSR_RXPAR_BIT (1 << 2) /* RX parity error */
-#define MAX3107_LSR_FRERR_BIT (1 << 3) /* Frame error */
-#define MAX3107_LSR_RXBRK_BIT (1 << 4) /* RX break */
-#define MAX3107_LSR_RXNOISE_BIT (1 << 5) /* RX noise */
-#define MAX3107_LSR_UNDEF6_BIT (1 << 6) /* Undefined/not used */
-#define MAX3107_LSR_CTS_BIT (1 << 7) /* CTS pin state */
-
-/* Special character register bits */
-#define MAX3107_SPCHR_XON1_BIT (1 << 0) /* XON1 character */
-#define MAX3107_SPCHR_XON2_BIT (1 << 1) /* XON2 character */
-#define MAX3107_SPCHR_XOFF1_BIT (1 << 2) /* XOFF1 character */
-#define MAX3107_SPCHR_XOFF2_BIT (1 << 3) /* XOFF2 character */
-#define MAX3107_SPCHR_BREAK_BIT (1 << 4) /* RX break */
-#define MAX3107_SPCHR_MULTIDROP_BIT (1 << 5) /* 9-bit multidrop addr char */
-#define MAX3107_SPCHR_UNDEF6_BIT (1 << 6) /* Undefined/not used */
-#define MAX3107_SPCHR_UNDEF7_BIT (1 << 7) /* Undefined/not used */
-
-/* Status register bits */
-#define MAX3107_STS_GPIO0_BIT (1 << 0) /* GPIO 0 interrupt */
-#define MAX3107_STS_GPIO1_BIT (1 << 1) /* GPIO 1 interrupt */
-#define MAX3107_STS_GPIO2_BIT (1 << 2) /* GPIO 2 interrupt */
-#define MAX3107_STS_GPIO3_BIT (1 << 3) /* GPIO 3 interrupt */
-#define MAX3107_STS_UNDEF4_BIT (1 << 4) /* Undefined/not used */
-#define MAX3107_STS_CLKREADY_BIT (1 << 5) /* Clock ready */
-#define MAX3107_STS_SLEEP_BIT (1 << 6) /* Sleep interrupt */
-#define MAX3107_STS_UNDEF7_BIT (1 << 7) /* Undefined/not used */
-
-/* MODE1 register bits */
-#define MAX3107_MODE1_RXDIS_BIT (1 << 0) /* RX disable */
-#define MAX3107_MODE1_TXDIS_BIT (1 << 1) /* TX disable */
-#define MAX3107_MODE1_TXHIZ_BIT (1 << 2) /* TX pin three-state */
-#define MAX3107_MODE1_RTSHIZ_BIT (1 << 3) /* RTS pin three-state */
-#define MAX3107_MODE1_TRNSCVCTRL_BIT (1 << 4) /* Transceiver ctrl enable */
-#define MAX3107_MODE1_FORCESLEEP_BIT (1 << 5) /* Force sleep mode */
-#define MAX3107_MODE1_AUTOSLEEP_BIT (1 << 6) /* Auto sleep enable */
-#define MAX3107_MODE1_IRQSEL_BIT (1 << 7) /* IRQ pin enable */
-
-/* MODE2 register bits */
-#define MAX3107_MODE2_RST_BIT (1 << 0) /* Chip reset */
-#define MAX3107_MODE2_FIFORST_BIT (1 << 1) /* FIFO reset */
-#define MAX3107_MODE2_RXTRIGINV_BIT (1 << 2) /* RX FIFO INT invert */
-#define MAX3107_MODE2_RXEMPTINV_BIT (1 << 3) /* RX FIFO empty INT invert */
-#define MAX3107_MODE2_SPCHR_BIT (1 << 4) /* Special chr detect enable */
-#define MAX3107_MODE2_LOOPBACK_BIT (1 << 5) /* Internal loopback enable */
-#define MAX3107_MODE2_MULTIDROP_BIT (1 << 6) /* 9-bit multidrop enable */
-#define MAX3107_MODE2_ECHOSUPR_BIT (1 << 7) /* ECHO suppression enable */
-
-/* LCR register bits */
-#define MAX3107_LCR_LENGTH0_BIT (1 << 0) /* Word length bit 0 */
-#define MAX3107_LCR_LENGTH1_BIT (1 << 1) /* Word length bit 1
- *
- * Word length bits table:
- * 00 -> 5 bit words
- * 01 -> 6 bit words
- * 10 -> 7 bit words
- * 11 -> 8 bit words
- */
-#define MAX3107_LCR_STOPLEN_BIT (1 << 2) /* STOP length bit
- *
- * STOP length bit table:
- * 0 -> 1 stop bit
- * 1 -> 1-1.5 stop bits if
- * word length is 5,
- * 2 stop bits otherwise
- */
-#define MAX3107_LCR_PARITY_BIT (1 << 3) /* Parity bit enable */
-#define MAX3107_LCR_EVENPARITY_BIT (1 << 4) /* Even parity bit enable */
-#define MAX3107_LCR_FORCEPARITY_BIT (1 << 5) /* 9-bit multidrop parity */
-#define MAX3107_LCR_TXBREAK_BIT (1 << 6) /* TX break enable */
-#define MAX3107_LCR_RTS_BIT (1 << 7) /* RTS pin control */
-#define MAX3107_LCR_WORD_LEN_5 (0x0000)
-#define MAX3107_LCR_WORD_LEN_6 (0x0001)
-#define MAX3107_LCR_WORD_LEN_7 (0x0002)
-#define MAX3107_LCR_WORD_LEN_8 (0x0003)
-
-
-/* IRDA register bits */
-#define MAX3107_IRDA_IRDAEN_BIT (1 << 0) /* IRDA mode enable */
-#define MAX3107_IRDA_SIR_BIT (1 << 1) /* SIR mode enable */
-#define MAX3107_IRDA_SHORTIR_BIT (1 << 2) /* Short SIR mode enable */
-#define MAX3107_IRDA_MIR_BIT (1 << 3) /* MIR mode enable */
-#define MAX3107_IRDA_RXINV_BIT (1 << 4) /* RX logic inversion enable */
-#define MAX3107_IRDA_TXINV_BIT (1 << 5) /* TX logic inversion enable */
-#define MAX3107_IRDA_UNDEF6_BIT (1 << 6) /* Undefined/not used */
-#define MAX3107_IRDA_UNDEF7_BIT (1 << 7) /* Undefined/not used */
-
-/* Flow control trigger level register masks */
-#define MAX3107_FLOWLVL_HALT_MASK (0x000f) /* Flow control halt level */
-#define MAX3107_FLOWLVL_RES_MASK (0x00f0) /* Flow control resume level */
-#define MAX3107_FLOWLVL_HALT(words) ((words/8) & 0x000f)
-#define MAX3107_FLOWLVL_RES(words) (((words/8) & 0x000f) << 4)
-
-/* FIFO interrupt trigger level register masks */
-#define MAX3107_FIFOTRIGLVL_TX_MASK (0x000f) /* TX FIFO trigger level */
-#define MAX3107_FIFOTRIGLVL_RX_MASK (0x00f0) /* RX FIFO trigger level */
-#define MAX3107_FIFOTRIGLVL_TX(words) ((words/8) & 0x000f)
-#define MAX3107_FIFOTRIGLVL_RX(words) (((words/8) & 0x000f) << 4)
-
-/* Flow control register bits */
-#define MAX3107_FLOWCTRL_AUTORTS_BIT (1 << 0) /* Auto RTS flow ctrl enable */
-#define MAX3107_FLOWCTRL_AUTOCTS_BIT (1 << 1) /* Auto CTS flow ctrl enable */
-#define MAX3107_FLOWCTRL_GPIADDR_BIT (1 << 2) /* Enables that GPIO inputs
- * are used in conjunction with
- * XOFF2 for definition of
- * special character */
-#define MAX3107_FLOWCTRL_SWFLOWEN_BIT (1 << 3) /* Auto SW flow ctrl enable */
-#define MAX3107_FLOWCTRL_SWFLOW0_BIT (1 << 4) /* SWFLOW bit 0 */
-#define MAX3107_FLOWCTRL_SWFLOW1_BIT (1 << 5) /* SWFLOW bit 1
- *
- * SWFLOW bits 1 & 0 table:
- * 00 -> no transmitter flow
- * control
- * 01 -> receiver compares
- * XON2 and XOFF2
- * and controls
- * transmitter
- * 10 -> receiver compares
- * XON1 and XOFF1
- * and controls
- * transmitter
- * 11 -> receiver compares
- * XON1, XON2, XOFF1 and
- * XOFF2 and controls
- * transmitter
- */
-#define MAX3107_FLOWCTRL_SWFLOW2_BIT (1 << 6) /* SWFLOW bit 2 */
-#define MAX3107_FLOWCTRL_SWFLOW3_BIT (1 << 7) /* SWFLOW bit 3
- *
- * SWFLOW bits 3 & 2 table:
- * 00 -> no received flow
- * control
- * 01 -> transmitter generates
- * XON2 and XOFF2
- * 10 -> transmitter generates
- * XON1 and XOFF1
- * 11 -> transmitter generates
- * XON1, XON2, XOFF1 and
- * XOFF2
- */
-
-/* GPIO configuration register bits */
-#define MAX3107_GPIOCFG_GP0OUT_BIT (1 << 0) /* GPIO 0 output enable */
-#define MAX3107_GPIOCFG_GP1OUT_BIT (1 << 1) /* GPIO 1 output enable */
-#define MAX3107_GPIOCFG_GP2OUT_BIT (1 << 2) /* GPIO 2 output enable */
-#define MAX3107_GPIOCFG_GP3OUT_BIT (1 << 3) /* GPIO 3 output enable */
-#define MAX3107_GPIOCFG_GP0OD_BIT (1 << 4) /* GPIO 0 open-drain enable */
-#define MAX3107_GPIOCFG_GP1OD_BIT (1 << 5) /* GPIO 1 open-drain enable */
-#define MAX3107_GPIOCFG_GP2OD_BIT (1 << 6) /* GPIO 2 open-drain enable */
-#define MAX3107_GPIOCFG_GP3OD_BIT (1 << 7) /* GPIO 3 open-drain enable */
-
-/* GPIO DATA register bits */
-#define MAX3107_GPIODATA_GP0OUT_BIT (1 << 0) /* GPIO 0 output value */
-#define MAX3107_GPIODATA_GP1OUT_BIT (1 << 1) /* GPIO 1 output value */
-#define MAX3107_GPIODATA_GP2OUT_BIT (1 << 2) /* GPIO 2 output value */
-#define MAX3107_GPIODATA_GP3OUT_BIT (1 << 3) /* GPIO 3 output value */
-#define MAX3107_GPIODATA_GP0IN_BIT (1 << 4) /* GPIO 0 input value */
-#define MAX3107_GPIODATA_GP1IN_BIT (1 << 5) /* GPIO 1 input value */
-#define MAX3107_GPIODATA_GP2IN_BIT (1 << 6) /* GPIO 2 input value */
-#define MAX3107_GPIODATA_GP3IN_BIT (1 << 7) /* GPIO 3 input value */
-
-/* PLL configuration register masks */
-#define MAX3107_PLLCFG_PREDIV_MASK (0x003f) /* PLL predivision value */
-#define MAX3107_PLLCFG_PLLFACTOR_MASK (0x00c0) /* PLL multiplication factor */
-
-/* Baud rate generator configuration register masks and bits */
-#define MAX3107_BRGCFG_FRACT_MASK (0x000f) /* Fractional portion of
- * Baud rate generator divisor
- */
-#define MAX3107_BRGCFG_2XMODE_BIT (1 << 4) /* Double baud rate */
-#define MAX3107_BRGCFG_4XMODE_BIT (1 << 5) /* Quadruple baud rate */
-#define MAX3107_BRGCFG_UNDEF6_BIT (1 << 6) /* Undefined/not used */
-#define MAX3107_BRGCFG_UNDEF7_BIT (1 << 7) /* Undefined/not used */
-
-/* Clock source register bits */
-#define MAX3107_CLKSRC_INTOSC_BIT (1 << 0) /* Internal osc enable */
-#define MAX3107_CLKSRC_CRYST_BIT (1 << 1) /* Crystal osc enable */
-#define MAX3107_CLKSRC_PLL_BIT (1 << 2) /* PLL enable */
-#define MAX3107_CLKSRC_PLLBYP_BIT (1 << 3) /* PLL bypass */
-#define MAX3107_CLKSRC_EXTCLK_BIT (1 << 4) /* External clock enable */
-#define MAX3107_CLKSRC_UNDEF5_BIT (1 << 5) /* Undefined/not used */
-#define MAX3107_CLKSRC_UNDEF6_BIT (1 << 6) /* Undefined/not used */
-#define MAX3107_CLKSRC_CLK2RTS_BIT (1 << 7) /* Baud clk to RTS pin */
-
-
-/* HW definitions */
-#define MAX3107_RX_FIFO_SIZE 128
-#define MAX3107_TX_FIFO_SIZE 128
-#define MAX3107_REVID1 0x00a0
-#define MAX3107_REVID2 0x00a1
-
-
-/* Baud rate generator configuration values for external clock 13MHz */
-#define MAX3107_BRG13_B300 (0x0A9400 | 0x05)
-#define MAX3107_BRG13_B600 (0x054A00 | 0x03)
-#define MAX3107_BRG13_B1200 (0x02A500 | 0x01)
-#define MAX3107_BRG13_B2400 (0x015200 | 0x09)
-#define MAX3107_BRG13_B4800 (0x00A900 | 0x04)
-#define MAX3107_BRG13_B9600 (0x005400 | 0x0A)
-#define MAX3107_BRG13_B19200 (0x002A00 | 0x05)
-#define MAX3107_BRG13_B38400 (0x001500 | 0x03)
-#define MAX3107_BRG13_B57600 (0x000E00 | 0x02)
-#define MAX3107_BRG13_B115200 (0x000700 | 0x01)
-#define MAX3107_BRG13_B230400 (0x000300 | 0x08)
-#define MAX3107_BRG13_B460800 (0x000100 | 0x0c)
-#define MAX3107_BRG13_B921600 (0x000100 | 0x1c)
-
-/* Baud rate generator configuration values for external clock 26MHz */
-#define MAX3107_BRG26_B300 (0x152800 | 0x0A)
-#define MAX3107_BRG26_B600 (0x0A9400 | 0x05)
-#define MAX3107_BRG26_B1200 (0x054A00 | 0x03)
-#define MAX3107_BRG26_B2400 (0x02A500 | 0x01)
-#define MAX3107_BRG26_B4800 (0x015200 | 0x09)
-#define MAX3107_BRG26_B9600 (0x00A900 | 0x04)
-#define MAX3107_BRG26_B19200 (0x005400 | 0x0A)
-#define MAX3107_BRG26_B38400 (0x002A00 | 0x05)
-#define MAX3107_BRG26_B57600 (0x001C00 | 0x03)
-#define MAX3107_BRG26_B115200 (0x000E00 | 0x02)
-#define MAX3107_BRG26_B230400 (0x000700 | 0x01)
-#define MAX3107_BRG26_B460800 (0x000300 | 0x08)
-#define MAX3107_BRG26_B921600 (0x000100 | 0x0C)
-
-/* Baud rate generator configuration values for internal clock */
-#define MAX3107_BRG13_IB300 (0x008000 | 0x00)
-#define MAX3107_BRG13_IB600 (0x004000 | 0x00)
-#define MAX3107_BRG13_IB1200 (0x002000 | 0x00)
-#define MAX3107_BRG13_IB2400 (0x001000 | 0x00)
-#define MAX3107_BRG13_IB4800 (0x000800 | 0x00)
-#define MAX3107_BRG13_IB9600 (0x000400 | 0x00)
-#define MAX3107_BRG13_IB19200 (0x000200 | 0x00)
-#define MAX3107_BRG13_IB38400 (0x000100 | 0x00)
-#define MAX3107_BRG13_IB57600 (0x000000 | 0x0B)
-#define MAX3107_BRG13_IB115200 (0x000000 | 0x05)
-#define MAX3107_BRG13_IB230400 (0x000000 | 0x03)
-#define MAX3107_BRG13_IB460800 (0x000000 | 0x00)
-#define MAX3107_BRG13_IB921600 (0x000000 | 0x00)
-
-
-struct baud_table {
- int baud;
- u32 new_brg;
-};
-
-struct max3107_port {
- /* UART port structure */
- struct uart_port port;
-
- /* SPI device structure */
- struct spi_device *spi;
-
-#if defined(CONFIG_GPIOLIB)
- /* GPIO chip structure */
- struct gpio_chip chip;
-#endif
-
- /* Workqueue that does all the magic */
- struct workqueue_struct *workqueue;
- struct work_struct work;
-
- /* Lock for shared data */
- spinlock_t data_lock;
-
- /* Device configuration */
- int ext_clk; /* 1 if external clock used */
- int loopback; /* Current loopback mode state */
- int baud; /* Current baud rate */
-
- /* State flags */
- int suspended; /* Indicates suspend mode */
- int tx_fifo_empty; /* Flag for TX FIFO state */
- int rx_enabled; /* Flag for receiver state */
- int tx_enabled; /* Flag for transmitter state */
-
- u16 irqen_reg; /* Current IRQ enable register value */
- /* Shared data */
- u16 mode1_reg; /* Current mode1 register value*/
- int mode1_commit; /* Flag for setting new mode1 register value */
- u16 lcr_reg; /* Current LCR register value */
- int lcr_commit; /* Flag for setting new LCR register value */
- u32 brg_cfg; /* Current Baud rate generator config */
- int brg_commit; /* Flag for setting new baud rate generator
- * config
- */
- struct baud_table *baud_tbl;
- int handle_irq; /* Indicates that IRQ should be handled */
-
- /* Rx buffer and str*/
- u16 *rxbuf;
- u8 *rxstr;
- /* Tx buffer*/
- u16 *txbuf;
-
- struct max3107_plat *pdata; /* Platform data */
-};
-
-/* Platform data structure */
-struct max3107_plat {
- /* Loopback mode enable */
- int loopback;
- /* External clock enable */
- int ext_clk;
- /* Called during the register initialisation */
- void (*init)(struct max3107_port *s);
- /* Called when the port is found and configured */
- int (*configure)(struct max3107_port *s);
- /* HW suspend function */
- void (*hw_suspend) (struct max3107_port *s, int suspend);
- /* Polling mode enable */
- int polled_mode;
- /* Polling period if polling mode enabled */
- int poll_time;
-};
-
-extern int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len);
-extern void max3107_hw_susp(struct max3107_port *s, int suspend);
-extern int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata);
-extern int max3107_remove(struct spi_device *spi);
-extern int max3107_suspend(struct spi_device *spi, pm_message_t state);
-extern int max3107_resume(struct spi_device *spi);
-
-#endif /* _LINUX_SERIAL_MAX3107_H */
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
new file mode 100644
index 00000000000..2bc28a59d38
--- /dev/null
+++ b/drivers/tty/serial/max310x.c
@@ -0,0 +1,1260 @@
+/*
+ * Maxim (Dallas) MAX3107/8 serial driver
+ *
+ * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * Based on max3100.c, by Christian Pellegrin <chripell@evolware.org>
+ * Based on max3110.c, by Feng Tang <feng.tang@intel.com>
+ * Based on max3107.c, by Aavamobile
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/* TODO: MAX3109 support (Dual) */
+/* TODO: MAX14830 support (Quad) */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/regmap.h>
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/platform_data/max310x.h>
+
+#define MAX310X_MAJOR 204
+#define MAX310X_MINOR 209
+
+/* MAX310X register definitions */
+#define MAX310X_RHR_REG (0x00) /* RX FIFO */
+#define MAX310X_THR_REG (0x00) /* TX FIFO */
+#define MAX310X_IRQEN_REG (0x01) /* IRQ enable */
+#define MAX310X_IRQSTS_REG (0x02) /* IRQ status */
+#define MAX310X_LSR_IRQEN_REG (0x03) /* LSR IRQ enable */
+#define MAX310X_LSR_IRQSTS_REG (0x04) /* LSR IRQ status */
+#define MAX310X_SPCHR_IRQEN_REG (0x05) /* Special char IRQ enable */
+#define MAX310X_SPCHR_IRQSTS_REG (0x06) /* Special char IRQ status */
+#define MAX310X_STS_IRQEN_REG (0x07) /* Status IRQ enable */
+#define MAX310X_STS_IRQSTS_REG (0x08) /* Status IRQ status */
+#define MAX310X_MODE1_REG (0x09) /* MODE1 */
+#define MAX310X_MODE2_REG (0x0a) /* MODE2 */
+#define MAX310X_LCR_REG (0x0b) /* LCR */
+#define MAX310X_RXTO_REG (0x0c) /* RX timeout */
+#define MAX310X_HDPIXDELAY_REG (0x0d) /* Auto transceiver delays */
+#define MAX310X_IRDA_REG (0x0e) /* IRDA settings */
+#define MAX310X_FLOWLVL_REG (0x0f) /* Flow control levels */
+#define MAX310X_FIFOTRIGLVL_REG (0x10) /* FIFO IRQ trigger levels */
+#define MAX310X_TXFIFOLVL_REG (0x11) /* TX FIFO level */
+#define MAX310X_RXFIFOLVL_REG (0x12) /* RX FIFO level */
+#define MAX310X_FLOWCTRL_REG (0x13) /* Flow control */
+#define MAX310X_XON1_REG (0x14) /* XON1 character */
+#define MAX310X_XON2_REG (0x15) /* XON2 character */
+#define MAX310X_XOFF1_REG (0x16) /* XOFF1 character */
+#define MAX310X_XOFF2_REG (0x17) /* XOFF2 character */
+#define MAX310X_GPIOCFG_REG (0x18) /* GPIO config */
+#define MAX310X_GPIODATA_REG (0x19) /* GPIO data */
+#define MAX310X_PLLCFG_REG (0x1a) /* PLL config */
+#define MAX310X_BRGCFG_REG (0x1b) /* Baud rate generator conf */
+#define MAX310X_BRGDIVLSB_REG (0x1c) /* Baud rate divisor LSB */
+#define MAX310X_BRGDIVMSB_REG (0x1d) /* Baud rate divisor MSB */
+#define MAX310X_CLKSRC_REG (0x1e) /* Clock source */
+/* Only present in MAX3107 */
+#define MAX3107_REVID_REG (0x1f) /* Revision identification */
+
+/* IRQ register bits */
+#define MAX310X_IRQ_LSR_BIT (1 << 0) /* LSR interrupt */
+#define MAX310X_IRQ_SPCHR_BIT (1 << 1) /* Special char interrupt */
+#define MAX310X_IRQ_STS_BIT (1 << 2) /* Status interrupt */
+#define MAX310X_IRQ_RXFIFO_BIT (1 << 3) /* RX FIFO interrupt */
+#define MAX310X_IRQ_TXFIFO_BIT (1 << 4) /* TX FIFO interrupt */
+#define MAX310X_IRQ_TXEMPTY_BIT (1 << 5) /* TX FIFO empty interrupt */
+#define MAX310X_IRQ_RXEMPTY_BIT (1 << 6) /* RX FIFO empty interrupt */
+#define MAX310X_IRQ_CTS_BIT (1 << 7) /* CTS interrupt */
+
+/* LSR register bits */
+#define MAX310X_LSR_RXTO_BIT (1 << 0) /* RX timeout */
+#define MAX310X_LSR_RXOVR_BIT (1 << 1) /* RX overrun */
+#define MAX310X_LSR_RXPAR_BIT (1 << 2) /* RX parity error */
+#define MAX310X_LSR_FRERR_BIT (1 << 3) /* Frame error */
+#define MAX310X_LSR_RXBRK_BIT (1 << 4) /* RX break */
+#define MAX310X_LSR_RXNOISE_BIT (1 << 5) /* RX noise */
+#define MAX310X_LSR_CTS_BIT (1 << 7) /* CTS pin state */
+
+/* Special character register bits */
+#define MAX310X_SPCHR_XON1_BIT (1 << 0) /* XON1 character */
+#define MAX310X_SPCHR_XON2_BIT (1 << 1) /* XON2 character */
+#define MAX310X_SPCHR_XOFF1_BIT (1 << 2) /* XOFF1 character */
+#define MAX310X_SPCHR_XOFF2_BIT (1 << 3) /* XOFF2 character */
+#define MAX310X_SPCHR_BREAK_BIT (1 << 4) /* RX break */
+#define MAX310X_SPCHR_MULTIDROP_BIT (1 << 5) /* 9-bit multidrop addr char */
+
+/* Status register bits */
+#define MAX310X_STS_GPIO0_BIT (1 << 0) /* GPIO 0 interrupt */
+#define MAX310X_STS_GPIO1_BIT (1 << 1) /* GPIO 1 interrupt */
+#define MAX310X_STS_GPIO2_BIT (1 << 2) /* GPIO 2 interrupt */
+#define MAX310X_STS_GPIO3_BIT (1 << 3) /* GPIO 3 interrupt */
+#define MAX310X_STS_CLKREADY_BIT (1 << 5) /* Clock ready */
+#define MAX310X_STS_SLEEP_BIT (1 << 6) /* Sleep interrupt */
+
+/* MODE1 register bits */
+#define MAX310X_MODE1_RXDIS_BIT (1 << 0) /* RX disable */
+#define MAX310X_MODE1_TXDIS_BIT (1 << 1) /* TX disable */
+#define MAX310X_MODE1_TXHIZ_BIT (1 << 2) /* TX pin three-state */
+#define MAX310X_MODE1_RTSHIZ_BIT (1 << 3) /* RTS pin three-state */
+#define MAX310X_MODE1_TRNSCVCTRL_BIT (1 << 4) /* Transceiver ctrl enable */
+#define MAX310X_MODE1_FORCESLEEP_BIT (1 << 5) /* Force sleep mode */
+#define MAX310X_MODE1_AUTOSLEEP_BIT (1 << 6) /* Auto sleep enable */
+#define MAX310X_MODE1_IRQSEL_BIT (1 << 7) /* IRQ pin enable */
+
+/* MODE2 register bits */
+#define MAX310X_MODE2_RST_BIT (1 << 0) /* Chip reset */
+#define MAX310X_MODE2_FIFORST_BIT (1 << 1) /* FIFO reset */
+#define MAX310X_MODE2_RXTRIGINV_BIT (1 << 2) /* RX FIFO INT invert */
+#define MAX310X_MODE2_RXEMPTINV_BIT (1 << 3) /* RX FIFO empty INT invert */
+#define MAX310X_MODE2_SPCHR_BIT (1 << 4) /* Special chr detect enable */
+#define MAX310X_MODE2_LOOPBACK_BIT (1 << 5) /* Internal loopback enable */
+#define MAX310X_MODE2_MULTIDROP_BIT (1 << 6) /* 9-bit multidrop enable */
+#define MAX310X_MODE2_ECHOSUPR_BIT (1 << 7) /* ECHO suppression enable */
+
+/* LCR register bits */
+#define MAX310X_LCR_LENGTH0_BIT (1 << 0) /* Word length bit 0 */
+#define MAX310X_LCR_LENGTH1_BIT (1 << 1) /* Word length bit 1
+ *
+ * Word length bits table:
+ * 00 -> 5 bit words
+ * 01 -> 6 bit words
+ * 10 -> 7 bit words
+ * 11 -> 8 bit words
+ */
+#define MAX310X_LCR_STOPLEN_BIT (1 << 2) /* STOP length bit
+ *
+ * STOP length bit table:
+ * 0 -> 1 stop bit
+ * 1 -> 1-1.5 stop bits if
+ * word length is 5,
+ * 2 stop bits otherwise
+ */
+#define MAX310X_LCR_PARITY_BIT (1 << 3) /* Parity bit enable */
+#define MAX310X_LCR_EVENPARITY_BIT (1 << 4) /* Even parity bit enable */
+#define MAX310X_LCR_FORCEPARITY_BIT (1 << 5) /* 9-bit multidrop parity */
+#define MAX310X_LCR_TXBREAK_BIT (1 << 6) /* TX break enable */
+#define MAX310X_LCR_RTS_BIT (1 << 7) /* RTS pin control */
+#define MAX310X_LCR_WORD_LEN_5 (0x00)
+#define MAX310X_LCR_WORD_LEN_6 (0x01)
+#define MAX310X_LCR_WORD_LEN_7 (0x02)
+#define MAX310X_LCR_WORD_LEN_8 (0x03)
+
+/* IRDA register bits */
+#define MAX310X_IRDA_IRDAEN_BIT (1 << 0) /* IRDA mode enable */
+#define MAX310X_IRDA_SIR_BIT (1 << 1) /* SIR mode enable */
+#define MAX310X_IRDA_SHORTIR_BIT (1 << 2) /* Short SIR mode enable */
+#define MAX310X_IRDA_MIR_BIT (1 << 3) /* MIR mode enable */
+#define MAX310X_IRDA_RXINV_BIT (1 << 4) /* RX logic inversion enable */
+#define MAX310X_IRDA_TXINV_BIT (1 << 5) /* TX logic inversion enable */
+
+/* Flow control trigger level register masks */
+#define MAX310X_FLOWLVL_HALT_MASK (0x000f) /* Flow control halt level */
+#define MAX310X_FLOWLVL_RES_MASK (0x00f0) /* Flow control resume level */
+#define MAX310X_FLOWLVL_HALT(words) ((words / 8) & 0x0f)
+#define MAX310X_FLOWLVL_RES(words) (((words / 8) & 0x0f) << 4)
+
+/* FIFO interrupt trigger level register masks */
+#define MAX310X_FIFOTRIGLVL_TX_MASK (0x0f) /* TX FIFO trigger level */
+#define MAX310X_FIFOTRIGLVL_RX_MASK (0xf0) /* RX FIFO trigger level */
+#define MAX310X_FIFOTRIGLVL_TX(words) ((words / 8) & 0x0f)
+#define MAX310X_FIFOTRIGLVL_RX(words) (((words / 8) & 0x0f) << 4)
+
+/* Flow control register bits */
+#define MAX310X_FLOWCTRL_AUTORTS_BIT (1 << 0) /* Auto RTS flow ctrl enable */
+#define MAX310X_FLOWCTRL_AUTOCTS_BIT (1 << 1) /* Auto CTS flow ctrl enable */
+#define MAX310X_FLOWCTRL_GPIADDR_BIT (1 << 2) /* Enables that GPIO inputs
+ * are used in conjunction with
+ * XOFF2 for definition of
+ * special character */
+#define MAX310X_FLOWCTRL_SWFLOWEN_BIT (1 << 3) /* Auto SW flow ctrl enable */
+#define MAX310X_FLOWCTRL_SWFLOW0_BIT (1 << 4) /* SWFLOW bit 0 */
+#define MAX310X_FLOWCTRL_SWFLOW1_BIT (1 << 5) /* SWFLOW bit 1
+ *
+ * SWFLOW bits 1 & 0 table:
+ * 00 -> no transmitter flow
+ * control
+ * 01 -> receiver compares
+ * XON2 and XOFF2
+ * and controls
+ * transmitter
+ * 10 -> receiver compares
+ * XON1 and XOFF1
+ * and controls
+ * transmitter
+ * 11 -> receiver compares
+ * XON1, XON2, XOFF1 and
+ * XOFF2 and controls
+ * transmitter
+ */
+#define MAX310X_FLOWCTRL_SWFLOW2_BIT (1 << 6) /* SWFLOW bit 2 */
+#define MAX310X_FLOWCTRL_SWFLOW3_BIT (1 << 7) /* SWFLOW bit 3
+ *
+ * SWFLOW bits 3 & 2 table:
+ * 00 -> no received flow
+ * control
+ * 01 -> transmitter generates
+ * XON2 and XOFF2
+ * 10 -> transmitter generates
+ * XON1 and XOFF1
+ * 11 -> transmitter generates
+ * XON1, XON2, XOFF1 and
+ * XOFF2
+ */
+
+/* GPIO configuration register bits */
+#define MAX310X_GPIOCFG_GP0OUT_BIT (1 << 0) /* GPIO 0 output enable */
+#define MAX310X_GPIOCFG_GP1OUT_BIT (1 << 1) /* GPIO 1 output enable */
+#define MAX310X_GPIOCFG_GP2OUT_BIT (1 << 2) /* GPIO 2 output enable */
+#define MAX310X_GPIOCFG_GP3OUT_BIT (1 << 3) /* GPIO 3 output enable */
+#define MAX310X_GPIOCFG_GP0OD_BIT (1 << 4) /* GPIO 0 open-drain enable */
+#define MAX310X_GPIOCFG_GP1OD_BIT (1 << 5) /* GPIO 1 open-drain enable */
+#define MAX310X_GPIOCFG_GP2OD_BIT (1 << 6) /* GPIO 2 open-drain enable */
+#define MAX310X_GPIOCFG_GP3OD_BIT (1 << 7) /* GPIO 3 open-drain enable */
+
+/* GPIO DATA register bits */
+#define MAX310X_GPIODATA_GP0OUT_BIT (1 << 0) /* GPIO 0 output value */
+#define MAX310X_GPIODATA_GP1OUT_BIT (1 << 1) /* GPIO 1 output value */
+#define MAX310X_GPIODATA_GP2OUT_BIT (1 << 2) /* GPIO 2 output value */
+#define MAX310X_GPIODATA_GP3OUT_BIT (1 << 3) /* GPIO 3 output value */
+#define MAX310X_GPIODATA_GP0IN_BIT (1 << 4) /* GPIO 0 input value */
+#define MAX310X_GPIODATA_GP1IN_BIT (1 << 5) /* GPIO 1 input value */
+#define MAX310X_GPIODATA_GP2IN_BIT (1 << 6) /* GPIO 2 input value */
+#define MAX310X_GPIODATA_GP3IN_BIT (1 << 7) /* GPIO 3 input value */
+
+/* PLL configuration register masks */
+#define MAX310X_PLLCFG_PREDIV_MASK (0x3f) /* PLL predivision value */
+#define MAX310X_PLLCFG_PLLFACTOR_MASK (0xc0) /* PLL multiplication factor */
+
+/* Baud rate generator configuration register bits */
+#define MAX310X_BRGCFG_2XMODE_BIT (1 << 4) /* Double baud rate */
+#define MAX310X_BRGCFG_4XMODE_BIT (1 << 5) /* Quadruple baud rate */
+
+/* Clock source register bits */
+#define MAX310X_CLKSRC_CRYST_BIT (1 << 1) /* Crystal osc enable */
+#define MAX310X_CLKSRC_PLL_BIT (1 << 2) /* PLL enable */
+#define MAX310X_CLKSRC_PLLBYP_BIT (1 << 3) /* PLL bypass */
+#define MAX310X_CLKSRC_EXTCLK_BIT (1 << 4) /* External clock enable */
+#define MAX310X_CLKSRC_CLK2RTS_BIT (1 << 7) /* Baud clk to RTS pin */
+
+/* Misc definitions */
+#define MAX310X_FIFO_SIZE (128)
+
+/* MAX3107 specific */
+#define MAX3107_REV_ID (0xa0)
+#define MAX3107_REV_MASK (0xfe)
+
+/* IRQ status bits definitions */
+#define MAX310X_IRQ_TX (MAX310X_IRQ_TXFIFO_BIT | \
+ MAX310X_IRQ_TXEMPTY_BIT)
+#define MAX310X_IRQ_RX (MAX310X_IRQ_RXFIFO_BIT | \
+ MAX310X_IRQ_RXEMPTY_BIT)
+
+/* Supported chip types */
+enum {
+ MAX310X_TYPE_MAX3107 = 3107,
+ MAX310X_TYPE_MAX3108 = 3108,
+};
+
+struct max310x_port {
+ struct uart_driver uart;
+ struct uart_port port;
+
+ const char *name;
+ int uartclk;
+
+ unsigned int nr_gpio;
+#ifdef CONFIG_GPIOLIB
+ struct gpio_chip gpio;
+#endif
+
+ struct regmap *regmap;
+ struct regmap_config regcfg;
+
+ struct workqueue_struct *wq;
+ struct work_struct tx_work;
+
+ struct mutex max310x_mutex;
+
+ struct max310x_pdata *pdata;
+};
+
+static bool max3107_8_reg_writeable(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case MAX310X_IRQSTS_REG:
+ case MAX310X_LSR_IRQSTS_REG:
+ case MAX310X_SPCHR_IRQSTS_REG:
+ case MAX310X_STS_IRQSTS_REG:
+ case MAX310X_TXFIFOLVL_REG:
+ case MAX310X_RXFIFOLVL_REG:
+ case MAX3107_REVID_REG: /* Only available on MAX3107 */
+ return false;
+ default:
+ break;
+ }
+
+ return true;
+}
+
+static bool max310x_reg_volatile(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case MAX310X_RHR_REG:
+ case MAX310X_IRQSTS_REG:
+ case MAX310X_LSR_IRQSTS_REG:
+ case MAX310X_SPCHR_IRQSTS_REG:
+ case MAX310X_STS_IRQSTS_REG:
+ case MAX310X_TXFIFOLVL_REG:
+ case MAX310X_RXFIFOLVL_REG:
+ case MAX310X_GPIODATA_REG:
+ return true;
+ default:
+ break;
+ }
+
+ return false;
+}
+
+static bool max310x_reg_precious(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case MAX310X_RHR_REG:
+ case MAX310X_IRQSTS_REG:
+ case MAX310X_SPCHR_IRQSTS_REG:
+ case MAX310X_STS_IRQSTS_REG:
+ return true;
+ default:
+ break;
+ }
+
+ return false;
+}
+
+static void max310x_set_baud(struct max310x_port *s, int baud)
+{
+ unsigned int mode = 0, div = s->uartclk / baud;
+
+ if (!(div / 16)) {
+ /* Mode x2 */
+ mode = MAX310X_BRGCFG_2XMODE_BIT;
+ div = (s->uartclk * 2) / baud;
+ }
+
+ if (!(div / 16)) {
+ /* Mode x4 */
+ mode = MAX310X_BRGCFG_4XMODE_BIT;
+ div = (s->uartclk * 4) / baud;
+ }
+
+ regmap_write(s->regmap, MAX310X_BRGDIVMSB_REG,
+ ((div / 16) >> 8) & 0xff);
+ regmap_write(s->regmap, MAX310X_BRGDIVLSB_REG, (div / 16) & 0xff);
+ regmap_write(s->regmap, MAX310X_BRGCFG_REG, (div % 16) | mode);
+}
+
+static void max310x_wait_pll(struct max310x_port *s)
+{
+ int tryes = 1000;
+
+ /* Wait for PLL only if crystal is used */
+ if (!(s->pdata->driver_flags & MAX310X_EXT_CLK)) {
+ unsigned int sts = 0;
+
+ while (tryes--) {
+ regmap_read(s->regmap, MAX310X_STS_IRQSTS_REG, &sts);
+ if (sts & MAX310X_STS_CLKREADY_BIT)
+ break;
+ }
+ }
+}
+
+static int __devinit max310x_update_best_err(unsigned long f, long *besterr)
+{
+ /* Use baudrate 115200 for calculate error */
+ long err = f % (115200 * 16);
+
+ if ((*besterr < 0) || (*besterr > err)) {
+ *besterr = err;
+ return 0;
+ }
+
+ return 1;
+}
+
+static int __devinit max310x_set_ref_clk(struct max310x_port *s)
+{
+ unsigned int div, clksrc, pllcfg = 0;
+ long besterr = -1;
+ unsigned long fdiv, fmul, bestfreq = s->pdata->frequency;
+
+ /* First, update error without PLL */
+ max310x_update_best_err(s->pdata->frequency, &besterr);
+
+ /* Try all possible PLL dividers */
+ for (div = 1; (div <= 63) && besterr; div++) {
+ fdiv = DIV_ROUND_CLOSEST(s->pdata->frequency, div);
+
+ /* Try multiplier 6 */
+ fmul = fdiv * 6;
+ if ((fdiv >= 500000) && (fdiv <= 800000))
+ if (!max310x_update_best_err(fmul, &besterr)) {
+ pllcfg = (0 << 6) | div;
+ bestfreq = fmul;
+ }
+ /* Try multiplier 48 */
+ fmul = fdiv * 48;
+ if ((fdiv >= 850000) && (fdiv <= 1200000))
+ if (!max310x_update_best_err(fmul, &besterr)) {
+ pllcfg = (1 << 6) | div;
+ bestfreq = fmul;
+ }
+ /* Try multiplier 96 */
+ fmul = fdiv * 96;
+ if ((fdiv >= 425000) && (fdiv <= 1000000))
+ if (!max310x_update_best_err(fmul, &besterr)) {
+ pllcfg = (2 << 6) | div;
+ bestfreq = fmul;
+ }
+ /* Try multiplier 144 */
+ fmul = fdiv * 144;
+ if ((fdiv >= 390000) && (fdiv <= 667000))
+ if (!max310x_update_best_err(fmul, &besterr)) {
+ pllcfg = (3 << 6) | div;
+ bestfreq = fmul;
+ }
+ }
+
+ /* Configure clock source */
+ if (s->pdata->driver_flags & MAX310X_EXT_CLK)
+ clksrc = MAX310X_CLKSRC_EXTCLK_BIT;
+ else
+ clksrc = MAX310X_CLKSRC_CRYST_BIT;
+
+ /* Configure PLL */
+ if (pllcfg) {
+ clksrc |= MAX310X_CLKSRC_PLL_BIT;
+ regmap_write(s->regmap, MAX310X_PLLCFG_REG, pllcfg);
+ } else
+ clksrc |= MAX310X_CLKSRC_PLLBYP_BIT;
+
+ regmap_write(s->regmap, MAX310X_CLKSRC_REG, clksrc);
+
+ if (pllcfg)
+ max310x_wait_pll(s);
+
+ dev_dbg(s->port.dev, "Reference clock set to %lu Hz\n", bestfreq);
+
+ return (int)bestfreq;
+}
+
+static void max310x_handle_rx(struct max310x_port *s, unsigned int rxlen)
+{
+ unsigned int sts = 0, ch = 0, flag;
+ struct tty_struct *tty = tty_port_tty_get(&s->port.state->port);
+
+ if (!tty)
+ return;
+
+ if (unlikely(rxlen >= MAX310X_FIFO_SIZE)) {
+ dev_warn(s->port.dev, "Possible RX FIFO overrun %d\n", rxlen);
+ /* Ensure sanity of RX level */
+ rxlen = MAX310X_FIFO_SIZE;
+ }
+
+ dev_dbg(s->port.dev, "RX Len = %u\n", rxlen);
+
+ while (rxlen--) {
+ regmap_read(s->regmap, MAX310X_RHR_REG, &ch);
+ regmap_read(s->regmap, MAX310X_LSR_IRQSTS_REG, &sts);
+
+ sts &= MAX310X_LSR_RXPAR_BIT | MAX310X_LSR_FRERR_BIT |
+ MAX310X_LSR_RXOVR_BIT | MAX310X_LSR_RXBRK_BIT;
+
+ s->port.icount.rx++;
+ flag = TTY_NORMAL;
+
+ if (unlikely(sts)) {
+ if (sts & MAX310X_LSR_RXBRK_BIT) {
+ s->port.icount.brk++;
+ if (uart_handle_break(&s->port))
+ continue;
+ } else if (sts & MAX310X_LSR_RXPAR_BIT)
+ s->port.icount.parity++;
+ else if (sts & MAX310X_LSR_FRERR_BIT)
+ s->port.icount.frame++;
+ else if (sts & MAX310X_LSR_RXOVR_BIT)
+ s->port.icount.overrun++;
+
+ sts &= s->port.read_status_mask;
+ if (sts & MAX310X_LSR_RXBRK_BIT)
+ flag = TTY_BREAK;
+ else if (sts & MAX310X_LSR_RXPAR_BIT)
+ flag = TTY_PARITY;
+ else if (sts & MAX310X_LSR_FRERR_BIT)
+ flag = TTY_FRAME;
+ else if (sts & MAX310X_LSR_RXOVR_BIT)
+ flag = TTY_OVERRUN;
+ }
+
+ if (uart_handle_sysrq_char(s->port, ch))
+ continue;
+
+ if (sts & s->port.ignore_status_mask)
+ continue;
+
+ uart_insert_char(&s->port, sts, MAX310X_LSR_RXOVR_BIT,
+ ch, flag);
+ }
+
+ tty_flip_buffer_push(tty);
+
+ tty_kref_put(tty);
+}
+
+static void max310x_handle_tx(struct max310x_port *s)
+{
+ struct circ_buf *xmit = &s->port.state->xmit;
+ unsigned int txlen = 0, to_send;
+
+ if (unlikely(s->port.x_char)) {
+ regmap_write(s->regmap, MAX310X_THR_REG, s->port.x_char);
+ s->port.icount.tx++;
+ s->port.x_char = 0;
+ return;
+ }
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&s->port))
+ return;
+
+ /* Get length of data pending in circular buffer */
+ to_send = uart_circ_chars_pending(xmit);
+ if (likely(to_send)) {
+ /* Limit to size of TX FIFO */
+ regmap_read(s->regmap, MAX310X_TXFIFOLVL_REG, &txlen);
+ txlen = MAX310X_FIFO_SIZE - txlen;
+ to_send = (to_send > txlen) ? txlen : to_send;
+
+ dev_dbg(s->port.dev, "TX Len = %u\n", to_send);
+
+ /* Add data to send */
+ s->port.icount.tx += to_send;
+ while (to_send--) {
+ regmap_write(s->regmap, MAX310X_THR_REG,
+ xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ };
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&s->port);
+}
+
+static irqreturn_t max310x_ist(int irq, void *dev_id)
+{
+ struct max310x_port *s = (struct max310x_port *)dev_id;
+ unsigned int ists = 0, lsr = 0, rxlen = 0;
+
+ mutex_lock(&s->max310x_mutex);
+
+ for (;;) {
+ /* Read IRQ status & RX FIFO level */
+ regmap_read(s->regmap, MAX310X_IRQSTS_REG, &ists);
+ regmap_read(s->regmap, MAX310X_LSR_IRQSTS_REG, &lsr);
+ regmap_read(s->regmap, MAX310X_RXFIFOLVL_REG, &rxlen);
+ if (!ists && !(lsr & MAX310X_LSR_RXTO_BIT) && !rxlen)
+ break;
+
+ dev_dbg(s->port.dev, "IRQ status: 0x%02x\n", ists);
+
+ if (rxlen)
+ max310x_handle_rx(s, rxlen);
+ if (ists & MAX310X_IRQ_TX)
+ max310x_handle_tx(s);
+ if (ists & MAX310X_IRQ_CTS_BIT)
+ uart_handle_cts_change(&s->port,
+ !!(lsr & MAX310X_LSR_CTS_BIT));
+ }
+
+ mutex_unlock(&s->max310x_mutex);
+
+ return IRQ_HANDLED;
+}
+
+static void max310x_wq_proc(struct work_struct *ws)
+{
+ struct max310x_port *s = container_of(ws, struct max310x_port, tx_work);
+
+ mutex_lock(&s->max310x_mutex);
+ max310x_handle_tx(s);
+ mutex_unlock(&s->max310x_mutex);
+}
+
+static void max310x_start_tx(struct uart_port *port)
+{
+ struct max310x_port *s = container_of(port, struct max310x_port, port);
+
+ queue_work(s->wq, &s->tx_work);
+}
+
+static void max310x_stop_tx(struct uart_port *port)
+{
+ /* Do nothing */
+}
+
+static void max310x_stop_rx(struct uart_port *port)
+{
+ /* Do nothing */
+}
+
+static unsigned int max310x_tx_empty(struct uart_port *port)
+{
+ unsigned int val = 0;
+ struct max310x_port *s = container_of(port, struct max310x_port, port);
+
+ mutex_lock(&s->max310x_mutex);
+ regmap_read(s->regmap, MAX310X_TXFIFOLVL_REG, &val);
+ mutex_unlock(&s->max310x_mutex);
+
+ return val ? 0 : TIOCSER_TEMT;
+}
+
+static void max310x_enable_ms(struct uart_port *port)
+{
+ /* Modem status not supported */
+}
+
+static unsigned int max310x_get_mctrl(struct uart_port *port)
+{
+ /* DCD and DSR are not wired and CTS/RTS is handled automatically
+ * so just indicate DSR and CAR asserted
+ */
+ return TIOCM_DSR | TIOCM_CAR;
+}
+
+static void max310x_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ /* DCD and DSR are not wired and CTS/RTS is hadnled automatically
+ * so do nothing
+ */
+}
+
+static void max310x_break_ctl(struct uart_port *port, int break_state)
+{
+ struct max310x_port *s = container_of(port, struct max310x_port, port);
+
+ mutex_lock(&s->max310x_mutex);
+ regmap_update_bits(s->regmap, MAX310X_LCR_REG,
+ MAX310X_LCR_TXBREAK_BIT,
+ break_state ? MAX310X_LCR_TXBREAK_BIT : 0);
+ mutex_unlock(&s->max310x_mutex);
+}
+
+static void max310x_set_termios(struct uart_port *port,
+ struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct max310x_port *s = container_of(port, struct max310x_port, port);
+ unsigned int lcr, flow = 0;
+ int baud;
+
+ mutex_lock(&s->max310x_mutex);
+
+ /* Mask termios capabilities we don't support */
+ termios->c_cflag &= ~CMSPAR;
+ termios->c_iflag &= ~IXANY;
+
+ /* Word size */
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ lcr = MAX310X_LCR_WORD_LEN_5;
+ break;
+ case CS6:
+ lcr = MAX310X_LCR_WORD_LEN_6;
+ break;
+ case CS7:
+ lcr = MAX310X_LCR_WORD_LEN_7;
+ break;
+ case CS8:
+ default:
+ lcr = MAX310X_LCR_WORD_LEN_8;
+ break;
+ }
+
+ /* Parity */
+ if (termios->c_cflag & PARENB) {
+ lcr |= MAX310X_LCR_PARITY_BIT;
+ if (!(termios->c_cflag & PARODD))
+ lcr |= MAX310X_LCR_EVENPARITY_BIT;
+ }
+
+ /* Stop bits */
+ if (termios->c_cflag & CSTOPB)
+ lcr |= MAX310X_LCR_STOPLEN_BIT; /* 2 stops */
+
+ /* Update LCR register */
+ regmap_write(s->regmap, MAX310X_LCR_REG, lcr);
+
+ /* Set read status mask */
+ port->read_status_mask = MAX310X_LSR_RXOVR_BIT;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= MAX310X_LSR_RXPAR_BIT |
+ MAX310X_LSR_FRERR_BIT;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ port->read_status_mask |= MAX310X_LSR_RXBRK_BIT;
+
+ /* Set status ignore mask */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNBRK)
+ port->ignore_status_mask |= MAX310X_LSR_RXBRK_BIT;
+ if (!(termios->c_cflag & CREAD))
+ port->ignore_status_mask |= MAX310X_LSR_RXPAR_BIT |
+ MAX310X_LSR_RXOVR_BIT |
+ MAX310X_LSR_FRERR_BIT |
+ MAX310X_LSR_RXBRK_BIT;
+
+ /* Configure flow control */
+ regmap_write(s->regmap, MAX310X_XON1_REG, termios->c_cc[VSTART]);
+ regmap_write(s->regmap, MAX310X_XOFF1_REG, termios->c_cc[VSTOP]);
+ if (termios->c_cflag & CRTSCTS)
+ flow |= MAX310X_FLOWCTRL_AUTOCTS_BIT |
+ MAX310X_FLOWCTRL_AUTORTS_BIT;
+ if (termios->c_iflag & IXON)
+ flow |= MAX310X_FLOWCTRL_SWFLOW3_BIT |
+ MAX310X_FLOWCTRL_SWFLOWEN_BIT;
+ if (termios->c_iflag & IXOFF)
+ flow |= MAX310X_FLOWCTRL_SWFLOW1_BIT |
+ MAX310X_FLOWCTRL_SWFLOWEN_BIT;
+ regmap_write(s->regmap, MAX310X_FLOWCTRL_REG, flow);
+
+ /* Get baud rate generator configuration */
+ baud = uart_get_baud_rate(port, termios, old,
+ port->uartclk / 16 / 0xffff,
+ port->uartclk / 4);
+
+ /* Setup baudrate generator */
+ max310x_set_baud(s, baud);
+
+ /* Update timeout according to new baud rate */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ mutex_unlock(&s->max310x_mutex);
+}
+
+static int max310x_startup(struct uart_port *port)
+{
+ unsigned int val, line = port->line;
+ struct max310x_port *s = container_of(port, struct max310x_port, port);
+
+ if (s->pdata->suspend)
+ s->pdata->suspend(0);
+
+ mutex_lock(&s->max310x_mutex);
+
+ /* Configure baud rate, 9600 as default */
+ max310x_set_baud(s, 9600);
+
+ /* Configure LCR register, 8N1 mode by default */
+ val = MAX310X_LCR_WORD_LEN_8;
+ regmap_write(s->regmap, MAX310X_LCR_REG, val);
+
+ /* Configure MODE1 register */
+ regmap_update_bits(s->regmap, MAX310X_MODE1_REG,
+ MAX310X_MODE1_TRNSCVCTRL_BIT,
+ (s->pdata->uart_flags[line] & MAX310X_AUTO_DIR_CTRL)
+ ? MAX310X_MODE1_TRNSCVCTRL_BIT : 0);
+
+ /* Configure MODE2 register */
+ val = MAX310X_MODE2_RXEMPTINV_BIT;
+ if (s->pdata->uart_flags[line] & MAX310X_LOOPBACK)
+ val |= MAX310X_MODE2_LOOPBACK_BIT;
+ if (s->pdata->uart_flags[line] & MAX310X_ECHO_SUPRESS)
+ val |= MAX310X_MODE2_ECHOSUPR_BIT;
+
+ /* Reset FIFOs */
+ val |= MAX310X_MODE2_FIFORST_BIT;
+ regmap_write(s->regmap, MAX310X_MODE2_REG, val);
+
+ /* Configure FIFO trigger level register */
+ /* RX FIFO trigger for 16 words, TX FIFO trigger for 64 words */
+ val = MAX310X_FIFOTRIGLVL_RX(16) | MAX310X_FIFOTRIGLVL_TX(64);
+ regmap_write(s->regmap, MAX310X_FIFOTRIGLVL_REG, val);
+
+ /* Configure flow control levels */
+ /* Flow control halt level 96, resume level 48 */
+ val = MAX310X_FLOWLVL_RES(48) | MAX310X_FLOWLVL_HALT(96);
+ regmap_write(s->regmap, MAX310X_FLOWLVL_REG, val);
+
+ /* Clear timeout register */
+ regmap_write(s->regmap, MAX310X_RXTO_REG, 0);
+
+ /* Configure LSR interrupt enable register */
+ /* Enable RX timeout interrupt */
+ val = MAX310X_LSR_RXTO_BIT;
+ regmap_write(s->regmap, MAX310X_LSR_IRQEN_REG, val);
+
+ /* Clear FIFO reset */
+ regmap_update_bits(s->regmap, MAX310X_MODE2_REG,
+ MAX310X_MODE2_FIFORST_BIT, 0);
+
+ /* Clear IRQ status register by reading it */
+ regmap_read(s->regmap, MAX310X_IRQSTS_REG, &val);
+
+ /* Configure interrupt enable register */
+ /* Enable CTS change interrupt */
+ val = MAX310X_IRQ_CTS_BIT;
+ /* Enable RX, TX interrupts */
+ val |= MAX310X_IRQ_RX | MAX310X_IRQ_TX;
+ regmap_write(s->regmap, MAX310X_IRQEN_REG, val);
+
+ mutex_unlock(&s->max310x_mutex);
+
+ return 0;
+}
+
+static void max310x_shutdown(struct uart_port *port)
+{
+ struct max310x_port *s = container_of(port, struct max310x_port, port);
+
+ /* Disable all interrupts */
+ mutex_lock(&s->max310x_mutex);
+ regmap_write(s->regmap, MAX310X_IRQEN_REG, 0);
+ mutex_unlock(&s->max310x_mutex);
+
+ if (s->pdata->suspend)
+ s->pdata->suspend(1);
+}
+
+static const char *max310x_type(struct uart_port *port)
+{
+ struct max310x_port *s = container_of(port, struct max310x_port, port);
+
+ return (port->type == PORT_MAX310X) ? s->name : NULL;
+}
+
+static int max310x_request_port(struct uart_port *port)
+{
+ /* Do nothing */
+ return 0;
+}
+
+static void max310x_release_port(struct uart_port *port)
+{
+ /* Do nothing */
+}
+
+static void max310x_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE)
+ port->type = PORT_MAX310X;
+}
+
+static int max310x_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ if ((ser->type == PORT_UNKNOWN) || (ser->type == PORT_MAX310X))
+ return 0;
+ if (ser->irq == port->irq)
+ return 0;
+
+ return -EINVAL;
+}
+
+static struct uart_ops max310x_ops = {
+ .tx_empty = max310x_tx_empty,
+ .set_mctrl = max310x_set_mctrl,
+ .get_mctrl = max310x_get_mctrl,
+ .stop_tx = max310x_stop_tx,
+ .start_tx = max310x_start_tx,
+ .stop_rx = max310x_stop_rx,
+ .enable_ms = max310x_enable_ms,
+ .break_ctl = max310x_break_ctl,
+ .startup = max310x_startup,
+ .shutdown = max310x_shutdown,
+ .set_termios = max310x_set_termios,
+ .type = max310x_type,
+ .request_port = max310x_request_port,
+ .release_port = max310x_release_port,
+ .config_port = max310x_config_port,
+ .verify_port = max310x_verify_port,
+};
+
+static int max310x_suspend(struct spi_device *spi, pm_message_t state)
+{
+ int ret;
+ struct max310x_port *s = dev_get_drvdata(&spi->dev);
+
+ dev_dbg(&spi->dev, "Suspend\n");
+
+ ret = uart_suspend_port(&s->uart, &s->port);
+
+ mutex_lock(&s->max310x_mutex);
+
+ /* Enable sleep mode */
+ regmap_update_bits(s->regmap, MAX310X_MODE1_REG,
+ MAX310X_MODE1_FORCESLEEP_BIT,
+ MAX310X_MODE1_FORCESLEEP_BIT);
+
+ mutex_unlock(&s->max310x_mutex);
+
+ if (s->pdata->suspend)
+ s->pdata->suspend(1);
+
+ return ret;
+}
+
+static int max310x_resume(struct spi_device *spi)
+{
+ struct max310x_port *s = dev_get_drvdata(&spi->dev);
+
+ dev_dbg(&spi->dev, "Resume\n");
+
+ if (s->pdata->suspend)
+ s->pdata->suspend(0);
+
+ mutex_lock(&s->max310x_mutex);
+
+ /* Disable sleep mode */
+ regmap_update_bits(s->regmap, MAX310X_MODE1_REG,
+ MAX310X_MODE1_FORCESLEEP_BIT,
+ 0);
+
+ max310x_wait_pll(s);
+
+ mutex_unlock(&s->max310x_mutex);
+
+ return uart_resume_port(&s->uart, &s->port);
+}
+
+#ifdef CONFIG_GPIOLIB
+static int max310x_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ unsigned int val = 0;
+ struct max310x_port *s = container_of(chip, struct max310x_port, gpio);
+
+ mutex_lock(&s->max310x_mutex);
+ regmap_read(s->regmap, MAX310X_GPIODATA_REG, &val);
+ mutex_unlock(&s->max310x_mutex);
+
+ return !!((val >> 4) & (1 << offset));
+}
+
+static void max310x_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct max310x_port *s = container_of(chip, struct max310x_port, gpio);
+
+ mutex_lock(&s->max310x_mutex);
+ regmap_update_bits(s->regmap, MAX310X_GPIODATA_REG, 1 << offset, value ?
+ 1 << offset : 0);
+ mutex_unlock(&s->max310x_mutex);
+}
+
+static int max310x_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct max310x_port *s = container_of(chip, struct max310x_port, gpio);
+
+ mutex_lock(&s->max310x_mutex);
+
+ regmap_update_bits(s->regmap, MAX310X_GPIOCFG_REG, 1 << offset, 0);
+
+ mutex_unlock(&s->max310x_mutex);
+
+ return 0;
+}
+
+static int max310x_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct max310x_port *s = container_of(chip, struct max310x_port, gpio);
+
+ mutex_lock(&s->max310x_mutex);
+
+ regmap_update_bits(s->regmap, MAX310X_GPIOCFG_REG, 1 << offset,
+ 1 << offset);
+ regmap_update_bits(s->regmap, MAX310X_GPIODATA_REG, 1 << offset, value ?
+ 1 << offset : 0);
+
+ mutex_unlock(&s->max310x_mutex);
+
+ return 0;
+}
+#endif
+
+/* Generic platform data */
+static struct max310x_pdata generic_plat_data = {
+ .driver_flags = MAX310X_EXT_CLK,
+ .uart_flags[0] = MAX310X_ECHO_SUPRESS,
+ .frequency = 26000000,
+};
+
+static int __devinit max310x_probe(struct spi_device *spi)
+{
+ struct max310x_port *s;
+ struct device *dev = &spi->dev;
+ int chiptype = spi_get_device_id(spi)->driver_data;
+ struct max310x_pdata *pdata = dev->platform_data;
+ unsigned int val = 0;
+ int ret;
+
+ /* Check for IRQ */
+ if (spi->irq <= 0) {
+ dev_err(dev, "No IRQ specified\n");
+ return -ENOTSUPP;
+ }
+
+ /* Alloc port structure */
+ s = devm_kzalloc(dev, sizeof(struct max310x_port), GFP_KERNEL);
+ if (!s) {
+ dev_err(dev, "Error allocating port structure\n");
+ return -ENOMEM;
+ }
+ dev_set_drvdata(dev, s);
+
+ if (!pdata) {
+ dev_warn(dev, "No platform data supplied, using defaults\n");
+ pdata = &generic_plat_data;
+ }
+ s->pdata = pdata;
+
+ /* Individual chip settings */
+ switch (chiptype) {
+ case MAX310X_TYPE_MAX3107:
+ s->name = "MAX3107";
+ s->nr_gpio = 4;
+ s->uart.nr = 1;
+ s->regcfg.max_register = 0x1f;
+ break;
+ case MAX310X_TYPE_MAX3108:
+ s->name = "MAX3108";
+ s->nr_gpio = 4;
+ s->uart.nr = 1;
+ s->regcfg.max_register = 0x1e;
+ break;
+ default:
+ dev_err(dev, "Unsupported chip type %i\n", chiptype);
+ return -ENOTSUPP;
+ }
+
+ /* Check input frequency */
+ if ((pdata->driver_flags & MAX310X_EXT_CLK) &&
+ ((pdata->frequency < 500000) || (pdata->frequency > 35000000)))
+ goto err_freq;
+ /* Check frequency for quartz */
+ if (!(pdata->driver_flags & MAX310X_EXT_CLK) &&
+ ((pdata->frequency < 1000000) || (pdata->frequency > 4000000)))
+ goto err_freq;
+
+ mutex_init(&s->max310x_mutex);
+
+ /* Setup SPI bus */
+ spi->mode = SPI_MODE_0;
+ spi->bits_per_word = 8;
+ spi->max_speed_hz = 26000000;
+ spi_setup(spi);
+
+ /* Setup regmap */
+ s->regcfg.reg_bits = 8;
+ s->regcfg.val_bits = 8;
+ s->regcfg.read_flag_mask = 0x00;
+ s->regcfg.write_flag_mask = 0x80;
+ s->regcfg.cache_type = REGCACHE_RBTREE;
+ s->regcfg.writeable_reg = max3107_8_reg_writeable;
+ s->regcfg.volatile_reg = max310x_reg_volatile;
+ s->regcfg.precious_reg = max310x_reg_precious;
+ s->regmap = devm_regmap_init_spi(spi, &s->regcfg);
+ if (IS_ERR(s->regmap)) {
+ ret = PTR_ERR(s->regmap);
+ dev_err(dev, "Failed to initialize register map\n");
+ goto err_out;
+ }
+
+ /* Reset chip & check SPI function */
+ ret = regmap_write(s->regmap, MAX310X_MODE2_REG, MAX310X_MODE2_RST_BIT);
+ if (ret) {
+ dev_err(dev, "SPI transfer failed\n");
+ goto err_out;
+ }
+ /* Clear chip reset */
+ regmap_write(s->regmap, MAX310X_MODE2_REG, 0);
+
+ switch (chiptype) {
+ case MAX310X_TYPE_MAX3107:
+ /* Check REV ID to ensure we are talking to what we expect */
+ regmap_read(s->regmap, MAX3107_REVID_REG, &val);
+ if (((val & MAX3107_REV_MASK) != MAX3107_REV_ID)) {
+ dev_err(dev, "%s ID 0x%02x does not match\n",
+ s->name, val);
+ ret = -ENODEV;
+ goto err_out;
+ }
+ break;
+ case MAX310X_TYPE_MAX3108:
+ /* MAX3108 have not REV ID register, we just check default value
+ * from clocksource register to make sure everything works.
+ */
+ regmap_read(s->regmap, MAX310X_CLKSRC_REG, &val);
+ if (val != (MAX310X_CLKSRC_EXTCLK_BIT |
+ MAX310X_CLKSRC_PLLBYP_BIT)) {
+ dev_err(dev, "%s not present\n", s->name);
+ ret = -ENODEV;
+ goto err_out;
+ }
+ break;
+ }
+
+ /* Board specific configure */
+ if (pdata->init)
+ pdata->init();
+ if (pdata->suspend)
+ pdata->suspend(0);
+
+ /* Calculate referecne clock */
+ s->uartclk = max310x_set_ref_clk(s);
+
+ /* Disable all interrupts */
+ regmap_write(s->regmap, MAX310X_IRQEN_REG, 0);
+
+ /* Setup MODE1 register */
+ val = MAX310X_MODE1_IRQSEL_BIT; /* Enable IRQ pin */
+ if (pdata->driver_flags & MAX310X_AUTOSLEEP)
+ val = MAX310X_MODE1_AUTOSLEEP_BIT;
+ regmap_write(s->regmap, MAX310X_MODE1_REG, val);
+
+ /* Setup interrupt */
+ ret = devm_request_threaded_irq(dev, spi->irq, NULL, max310x_ist,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ dev_name(dev), s);
+ if (ret) {
+ dev_err(dev, "Unable to reguest IRQ %i\n", spi->irq);
+ goto err_out;
+ }
+
+ /* Register UART driver */
+ s->uart.owner = THIS_MODULE;
+ s->uart.driver_name = dev_name(dev);
+ s->uart.dev_name = "ttyMAX";
+ s->uart.major = MAX310X_MAJOR;
+ s->uart.minor = MAX310X_MINOR;
+ ret = uart_register_driver(&s->uart);
+ if (ret) {
+ dev_err(dev, "Registering UART driver failed\n");
+ goto err_out;
+ }
+
+ /* Initialize workqueue for start TX */
+ s->wq = create_freezable_workqueue(dev_name(dev));
+ INIT_WORK(&s->tx_work, max310x_wq_proc);
+
+ /* Initialize UART port data */
+ s->port.line = 0;
+ s->port.dev = dev;
+ s->port.irq = spi->irq;
+ s->port.type = PORT_MAX310X;
+ s->port.fifosize = MAX310X_FIFO_SIZE;
+ s->port.flags = UPF_SKIP_TEST | UPF_FIXED_TYPE;
+ s->port.iotype = UPIO_PORT;
+ s->port.membase = (void __iomem *)0xffffffff; /* Bogus value */
+ s->port.uartclk = s->uartclk;
+ s->port.ops = &max310x_ops;
+ uart_add_one_port(&s->uart, &s->port);
+
+#ifdef CONFIG_GPIOLIB
+ /* Setup GPIO cotroller */
+ if (pdata->gpio_base) {
+ s->gpio.owner = THIS_MODULE;
+ s->gpio.dev = dev;
+ s->gpio.label = dev_name(dev);
+ s->gpio.direction_input = max310x_gpio_direction_input;
+ s->gpio.get = max310x_gpio_get;
+ s->gpio.direction_output= max310x_gpio_direction_output;
+ s->gpio.set = max310x_gpio_set;
+ s->gpio.base = pdata->gpio_base;
+ s->gpio.ngpio = s->nr_gpio;
+ if (gpiochip_add(&s->gpio)) {
+ /* Indicate that we should not call gpiochip_remove */
+ s->gpio.base = 0;
+ }
+ } else
+ dev_info(dev, "GPIO support not enabled\n");
+#endif
+
+ /* Go to suspend mode */
+ if (pdata->suspend)
+ pdata->suspend(1);
+
+ return 0;
+
+err_freq:
+ dev_err(dev, "Frequency parameter incorrect\n");
+ ret = -EINVAL;
+
+err_out:
+ dev_set_drvdata(dev, NULL);
+
+ return ret;
+}
+
+static int __devexit max310x_remove(struct spi_device *spi)
+{
+ struct device *dev = &spi->dev;
+ struct max310x_port *s = dev_get_drvdata(dev);
+ int ret = 0;
+
+ dev_dbg(dev, "Removing port\n");
+
+ devm_free_irq(dev, s->port.irq, s);
+
+ destroy_workqueue(s->wq);
+
+ uart_remove_one_port(&s->uart, &s->port);
+
+ uart_unregister_driver(&s->uart);
+
+#ifdef CONFIG_GPIOLIB
+ if (s->pdata->gpio_base) {
+ ret = gpiochip_remove(&s->gpio);
+ if (ret)
+ dev_err(dev, "Failed to remove gpio chip: %d\n", ret);
+ }
+#endif
+
+ dev_set_drvdata(dev, NULL);
+
+ if (s->pdata->suspend)
+ s->pdata->suspend(1);
+ if (s->pdata->exit)
+ s->pdata->exit();
+
+ return ret;
+}
+
+static const struct spi_device_id max310x_id_table[] = {
+ { "max3107", MAX310X_TYPE_MAX3107 },
+ { "max3108", MAX310X_TYPE_MAX3108 },
+};
+MODULE_DEVICE_TABLE(spi, max310x_id_table);
+
+static struct spi_driver max310x_driver = {
+ .driver = {
+ .name = "max310x",
+ .owner = THIS_MODULE,
+ },
+ .probe = max310x_probe,
+ .remove = __devexit_p(max310x_remove),
+ .suspend = max310x_suspend,
+ .resume = max310x_resume,
+ .id_table = max310x_id_table,
+};
+module_spi_driver(max310x_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
+MODULE_DESCRIPTION("MAX310X serial driver");
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
index bedac0d4c9c..f19d04ed858 100644
--- a/drivers/tty/serial/mpc52xx_uart.c
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -775,11 +775,15 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
}
if (new->c_cflag & PARENB) {
+ if (new->c_cflag & CMSPAR)
+ mr1 |= MPC52xx_PSC_MODE_PARFORCE;
+
+ /* With CMSPAR, PARODD also means high parity (same as termios) */
mr1 |= (new->c_cflag & PARODD) ?
MPC52xx_PSC_MODE_PARODD : MPC52xx_PSC_MODE_PAREVEN;
- } else
+ } else {
mr1 |= MPC52xx_PSC_MODE_PARNONE;
-
+ }
mr2 = 0;
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index 8131e2c2801..033e0bc9eba 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -896,7 +896,7 @@ static int __init msm_serial_probe(struct platform_device *pdev)
return PTR_ERR(msm_port->clk);
if (msm_port->is_uartdm)
- clk_set_rate(msm_port->clk, 7372800);
+ clk_set_rate(msm_port->clk, 1843200);
port->uartclk = clk_get_rate(msm_port->clk);
printk(KERN_INFO "uartclk = %d\n", port->uartclk);
diff --git a/drivers/tty/serial/msm_smd_tty.c b/drivers/tty/serial/msm_smd_tty.c
index b25e6ee7144..925d1fa153d 100644
--- a/drivers/tty/serial/msm_smd_tty.c
+++ b/drivers/tty/serial/msm_smd_tty.c
@@ -223,9 +223,11 @@ static int __init smd_tty_init(void)
return ret;
for (i = 0; i < smd_tty_channels_len; i++) {
- tty_port_init(&smd_tty[smd_tty_channels[i].id].port);
- smd_tty[smd_tty_channels[i].id].port.ops = &smd_tty_port_ops;
- tty_register_device(smd_tty_driver, smd_tty_channels[i].id, 0);
+ struct tty_port *port = &smd_tty[smd_tty_channels[i].id].port;
+ tty_port_init(port);
+ port->ops = &smd_tty_port_ops;
+ tty_port_register_device(port, smd_tty_driver,
+ smd_tty_channels[i].id, NULL);
}
return 0;
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 3a667eed63d..68984136bfb 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -262,7 +262,7 @@ static void mxs_auart_set_mctrl(struct uart_port *u, unsigned mctrl)
ctrl &= ~AUART_CTRL2_RTSEN;
if (mctrl & TIOCM_RTS) {
- if (u->state->port.flags & ASYNC_CTS_FLOW)
+ if (tty_port_cts_enabled(&u->state->port))
ctrl |= AUART_CTRL2_RTSEN;
}
@@ -457,11 +457,11 @@ static void mxs_auart_shutdown(struct uart_port *u)
writel(AUART_CTRL2_UARTEN, u->membase + AUART_CTRL2_CLR);
- writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_SET);
-
writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN,
u->membase + AUART_INTR_CLR);
+ writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_SET);
+
clk_disable_unprepare(s->clk);
}
@@ -796,6 +796,7 @@ static int __devexit mxs_auart_remove(struct platform_device *pdev)
auart_port[pdev->id] = NULL;
+ put_device(s->dev);
clk_put(s->clk);
free_irq(s->irq, s);
kfree(s);
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index 34e71874a89..df443b908ca 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -105,6 +105,10 @@ static int __devinit of_platform_serial_setup(struct platform_device *ofdev,
port->uartclk = clk;
port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
| UPF_FIXED_PORT | UPF_FIXED_TYPE;
+
+ if (of_find_property(np, "no-loopback-test", NULL))
+ port->flags |= UPF_SKIP_TEST;
+
port->dev = &ofdev->dev;
if (type == PORT_TEGRA)
@@ -144,8 +148,15 @@ static int __devinit of_platform_serial_probe(struct platform_device *ofdev)
switch (port_type) {
#ifdef CONFIG_SERIAL_8250
case PORT_8250 ... PORT_MAX_8250:
- ret = serial8250_register_port(&port);
+ {
+ /* For now the of bindings don't support the extra
+ 8250 specific bits */
+ struct uart_8250_port port8250;
+ memset(&port8250, 0, sizeof(port8250));
+ port8250.port = port;
+ ret = serial8250_register_8250_port(&port8250);
break;
+ }
#endif
#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
case PORT_NWPSERIAL:
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index d3cda0cb2df..f175385bb30 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -32,16 +32,16 @@
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
+#include <linux/platform_device.h>
#include <linux/io.h>
-#include <linux/dma-mapping.h>
#include <linux/clk.h>
#include <linux/serial_core.h>
#include <linux/irq.h>
#include <linux/pm_runtime.h>
#include <linux/of.h>
+#include <linux/gpio.h>
+#include <linux/pinctrl/consumer.h>
-#include <plat/dma.h>
-#include <plat/dmtimer.h>
#include <plat/omap-serial.h>
#define UART_BUILD_REVISION(x, y) (((x) << 8) | (y))
@@ -57,8 +57,8 @@
#define OMAP_UART_SCR_RX_TRIG_GRANU1_MASK (1 << 7)
/* FCR register bitmasks */
-#define OMAP_UART_FCR_RX_FIFO_TRIG_SHIFT 6
#define OMAP_UART_FCR_RX_FIFO_TRIG_MASK (0x3 << 6)
+#define OMAP_UART_FCR_TX_FIFO_TRIG_MASK (0x3 << 4)
/* MVR register bitmasks */
#define OMAP_UART_MVR_SCHEME_SHIFT 30
@@ -71,12 +71,52 @@
#define OMAP_UART_MVR_MAJ_SHIFT 8
#define OMAP_UART_MVR_MIN_MASK 0x3f
+struct uart_omap_port {
+ struct uart_port port;
+ struct uart_omap_dma uart_dma;
+ struct device *dev;
+
+ unsigned char ier;
+ unsigned char lcr;
+ unsigned char mcr;
+ unsigned char fcr;
+ unsigned char efr;
+ unsigned char dll;
+ unsigned char dlh;
+ unsigned char mdr1;
+ unsigned char scr;
+
+ int use_dma;
+ /*
+ * Some bits in registers are cleared on a read, so they must
+ * be saved whenever the register is read but the bits will not
+ * be immediately processed.
+ */
+ unsigned int lsr_break_flag;
+ unsigned char msr_saved_flags;
+ char name[20];
+ unsigned long port_activity;
+ u32 context_loss_cnt;
+ u32 errata;
+ u8 wakeups_enabled;
+ unsigned int irq_pending:1;
+
+ int DTR_gpio;
+ int DTR_inverted;
+ int DTR_active;
+
+ struct pm_qos_request pm_qos_request;
+ u32 latency;
+ u32 calc_latency;
+ struct work_struct qos_work;
+ struct pinctrl *pins;
+};
+
+#define to_uart_omap_port(p) ((container_of((p), struct uart_omap_port, port)))
+
static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS];
/* Forward declaration of functions */
-static void uart_tx_dma_callback(int lch, u16 ch_status, void *data);
-static void serial_omap_rxdma_poll(unsigned long uart_no);
-static int serial_omap_start_rxdma(struct uart_omap_port *up);
static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1);
static struct workqueue_struct *serial_omap_uart_wq;
@@ -101,6 +141,46 @@ static inline void serial_omap_clear_fifos(struct uart_omap_port *up)
serial_out(up, UART_FCR, 0);
}
+static int serial_omap_get_context_loss_count(struct uart_omap_port *up)
+{
+ struct omap_uart_port_info *pdata = up->dev->platform_data;
+
+ if (!pdata || !pdata->get_context_loss_count)
+ return 0;
+
+ return pdata->get_context_loss_count(up->dev);
+}
+
+static void serial_omap_set_forceidle(struct uart_omap_port *up)
+{
+ struct omap_uart_port_info *pdata = up->dev->platform_data;
+
+ if (!pdata || !pdata->set_forceidle)
+ return;
+
+ pdata->set_forceidle(up->dev);
+}
+
+static void serial_omap_set_noidle(struct uart_omap_port *up)
+{
+ struct omap_uart_port_info *pdata = up->dev->platform_data;
+
+ if (!pdata || !pdata->set_noidle)
+ return;
+
+ pdata->set_noidle(up->dev);
+}
+
+static void serial_omap_enable_wakeup(struct uart_omap_port *up, bool enable)
+{
+ struct omap_uart_port_info *pdata = up->dev->platform_data;
+
+ if (!pdata || !pdata->enable_wakeup)
+ return;
+
+ pdata->enable_wakeup(up->dev, enable);
+}
+
/*
* serial_omap_get_divisor - calculate divisor value
* @port: uart port info
@@ -126,151 +206,55 @@ serial_omap_get_divisor(struct uart_port *port, unsigned int baud)
return port->uartclk/(baud * divisor);
}
-static void serial_omap_stop_rxdma(struct uart_omap_port *up)
-{
- if (up->uart_dma.rx_dma_used) {
- del_timer(&up->uart_dma.rx_timer);
- omap_stop_dma(up->uart_dma.rx_dma_channel);
- omap_free_dma(up->uart_dma.rx_dma_channel);
- up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE;
- up->uart_dma.rx_dma_used = false;
- pm_runtime_mark_last_busy(&up->pdev->dev);
- pm_runtime_put_autosuspend(&up->pdev->dev);
- }
-}
-
static void serial_omap_enable_ms(struct uart_port *port)
{
- struct uart_omap_port *up = (struct uart_omap_port *)port;
+ struct uart_omap_port *up = to_uart_omap_port(port);
dev_dbg(up->port.dev, "serial_omap_enable_ms+%d\n", up->port.line);
- pm_runtime_get_sync(&up->pdev->dev);
+ pm_runtime_get_sync(up->dev);
up->ier |= UART_IER_MSI;
serial_out(up, UART_IER, up->ier);
- pm_runtime_put(&up->pdev->dev);
+ pm_runtime_mark_last_busy(up->dev);
+ pm_runtime_put_autosuspend(up->dev);
}
static void serial_omap_stop_tx(struct uart_port *port)
{
- struct uart_omap_port *up = (struct uart_omap_port *)port;
- struct omap_uart_port_info *pdata = up->pdev->dev.platform_data;
+ struct uart_omap_port *up = to_uart_omap_port(port);
- if (up->use_dma &&
- up->uart_dma.tx_dma_channel != OMAP_UART_DMA_CH_FREE) {
- /*
- * Check if dma is still active. If yes do nothing,
- * return. Else stop dma
- */
- if (omap_get_dma_active_status(up->uart_dma.tx_dma_channel))
- return;
- omap_stop_dma(up->uart_dma.tx_dma_channel);
- omap_free_dma(up->uart_dma.tx_dma_channel);
- up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE;
- pm_runtime_mark_last_busy(&up->pdev->dev);
- pm_runtime_put_autosuspend(&up->pdev->dev);
- }
-
- pm_runtime_get_sync(&up->pdev->dev);
+ pm_runtime_get_sync(up->dev);
if (up->ier & UART_IER_THRI) {
up->ier &= ~UART_IER_THRI;
serial_out(up, UART_IER, up->ier);
}
- if (!up->use_dma && pdata && pdata->set_forceidle)
- pdata->set_forceidle(up->pdev);
+ serial_omap_set_forceidle(up);
- pm_runtime_mark_last_busy(&up->pdev->dev);
- pm_runtime_put_autosuspend(&up->pdev->dev);
+ pm_runtime_mark_last_busy(up->dev);
+ pm_runtime_put_autosuspend(up->dev);
}
static void serial_omap_stop_rx(struct uart_port *port)
{
- struct uart_omap_port *up = (struct uart_omap_port *)port;
+ struct uart_omap_port *up = to_uart_omap_port(port);
- pm_runtime_get_sync(&up->pdev->dev);
- if (up->use_dma)
- serial_omap_stop_rxdma(up);
+ pm_runtime_get_sync(up->dev);
up->ier &= ~UART_IER_RLSI;
up->port.read_status_mask &= ~UART_LSR_DR;
serial_out(up, UART_IER, up->ier);
- pm_runtime_mark_last_busy(&up->pdev->dev);
- pm_runtime_put_autosuspend(&up->pdev->dev);
-}
-
-static inline void receive_chars(struct uart_omap_port *up,
- unsigned int *status)
-{
- struct tty_struct *tty = up->port.state->port.tty;
- unsigned int flag, lsr = *status;
- unsigned char ch = 0;
- int max_count = 256;
-
- do {
- if (likely(lsr & UART_LSR_DR))
- ch = serial_in(up, UART_RX);
- flag = TTY_NORMAL;
- up->port.icount.rx++;
-
- if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) {
- /*
- * For statistics only
- */
- if (lsr & UART_LSR_BI) {
- lsr &= ~(UART_LSR_FE | UART_LSR_PE);
- up->port.icount.brk++;
- /*
- * We do the SysRQ and SAK checking
- * here because otherwise the break
- * may get masked by ignore_status_mask
- * or read_status_mask.
- */
- if (uart_handle_break(&up->port))
- goto ignore_char;
- } else if (lsr & UART_LSR_PE) {
- up->port.icount.parity++;
- } else if (lsr & UART_LSR_FE) {
- up->port.icount.frame++;
- }
-
- if (lsr & UART_LSR_OE)
- up->port.icount.overrun++;
-
- /*
- * Mask off conditions which should be ignored.
- */
- lsr &= up->port.read_status_mask;
-
-#ifdef CONFIG_SERIAL_OMAP_CONSOLE
- if (up->port.line == up->port.cons->index) {
- /* Recover the break flag from console xmit */
- lsr |= up->lsr_break_flag;
- }
-#endif
- if (lsr & UART_LSR_BI)
- flag = TTY_BREAK;
- else if (lsr & UART_LSR_PE)
- flag = TTY_PARITY;
- else if (lsr & UART_LSR_FE)
- flag = TTY_FRAME;
- }
-
- if (uart_handle_sysrq_char(&up->port, ch))
- goto ignore_char;
- uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag);
-ignore_char:
- lsr = serial_in(up, UART_LSR);
- } while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (max_count-- > 0));
- spin_unlock(&up->port.lock);
- tty_flip_buffer_push(tty);
- spin_lock(&up->port.lock);
+ pm_runtime_mark_last_busy(up->dev);
+ pm_runtime_put_autosuspend(up->dev);
}
-static void transmit_chars(struct uart_omap_port *up)
+static void transmit_chars(struct uart_omap_port *up, unsigned int lsr)
{
struct circ_buf *xmit = &up->port.state->xmit;
int count;
+ if (!(lsr & UART_LSR_THRE))
+ return;
+
if (up->port.x_char) {
serial_out(up, UART_TX, up->port.x_char);
up->port.icount.tx++;
@@ -290,8 +274,11 @@ static void transmit_chars(struct uart_omap_port *up)
break;
} while (--count > 0);
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) {
+ spin_unlock(&up->port.lock);
uart_write_wakeup(&up->port);
+ spin_lock(&up->port.lock);
+ }
if (uart_circ_empty(xmit))
serial_omap_stop_tx(&up->port);
@@ -307,70 +294,13 @@ static inline void serial_omap_enable_ier_thri(struct uart_omap_port *up)
static void serial_omap_start_tx(struct uart_port *port)
{
- struct uart_omap_port *up = (struct uart_omap_port *)port;
- struct omap_uart_port_info *pdata = up->pdev->dev.platform_data;
- struct circ_buf *xmit;
- unsigned int start;
- int ret = 0;
-
- if (!up->use_dma) {
- pm_runtime_get_sync(&up->pdev->dev);
- serial_omap_enable_ier_thri(up);
- if (pdata && pdata->set_noidle)
- pdata->set_noidle(up->pdev);
- pm_runtime_mark_last_busy(&up->pdev->dev);
- pm_runtime_put_autosuspend(&up->pdev->dev);
- return;
- }
-
- if (up->uart_dma.tx_dma_used)
- return;
-
- xmit = &up->port.state->xmit;
-
- if (up->uart_dma.tx_dma_channel == OMAP_UART_DMA_CH_FREE) {
- pm_runtime_get_sync(&up->pdev->dev);
- ret = omap_request_dma(up->uart_dma.uart_dma_tx,
- "UART Tx DMA",
- (void *)uart_tx_dma_callback, up,
- &(up->uart_dma.tx_dma_channel));
+ struct uart_omap_port *up = to_uart_omap_port(port);
- if (ret < 0) {
- serial_omap_enable_ier_thri(up);
- return;
- }
- }
- spin_lock(&(up->uart_dma.tx_lock));
- up->uart_dma.tx_dma_used = true;
- spin_unlock(&(up->uart_dma.tx_lock));
-
- start = up->uart_dma.tx_buf_dma_phys +
- (xmit->tail & (UART_XMIT_SIZE - 1));
-
- up->uart_dma.tx_buf_size = uart_circ_chars_pending(xmit);
- /*
- * It is a circular buffer. See if the buffer has wounded back.
- * If yes it will have to be transferred in two separate dma
- * transfers
- */
- if (start + up->uart_dma.tx_buf_size >=
- up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE)
- up->uart_dma.tx_buf_size =
- (up->uart_dma.tx_buf_dma_phys +
- UART_XMIT_SIZE) - start;
-
- omap_set_dma_dest_params(up->uart_dma.tx_dma_channel, 0,
- OMAP_DMA_AMODE_CONSTANT,
- up->uart_dma.uart_base, 0, 0);
- omap_set_dma_src_params(up->uart_dma.tx_dma_channel, 0,
- OMAP_DMA_AMODE_POST_INC, start, 0, 0);
- omap_set_dma_transfer_params(up->uart_dma.tx_dma_channel,
- OMAP_DMA_DATA_TYPE_S8,
- up->uart_dma.tx_buf_size, 1,
- OMAP_DMA_SYNC_ELEMENT,
- up->uart_dma.uart_dma_tx, 0);
- /* FIXME: Cache maintenance needed here? */
- omap_start_dma(up->uart_dma.tx_dma_channel);
+ pm_runtime_get_sync(up->dev);
+ serial_omap_enable_ier_thri(up);
+ serial_omap_set_noidle(up);
+ pm_runtime_mark_last_busy(up->dev);
+ pm_runtime_put_autosuspend(up->dev);
}
static unsigned int check_modem_status(struct uart_omap_port *up)
@@ -401,76 +331,158 @@ static unsigned int check_modem_status(struct uart_omap_port *up)
return status;
}
+static void serial_omap_rlsi(struct uart_omap_port *up, unsigned int lsr)
+{
+ unsigned int flag;
+
+ up->port.icount.rx++;
+ flag = TTY_NORMAL;
+
+ if (lsr & UART_LSR_BI) {
+ flag = TTY_BREAK;
+ lsr &= ~(UART_LSR_FE | UART_LSR_PE);
+ up->port.icount.brk++;
+ /*
+ * We do the SysRQ and SAK checking
+ * here because otherwise the break
+ * may get masked by ignore_status_mask
+ * or read_status_mask.
+ */
+ if (uart_handle_break(&up->port))
+ return;
+
+ }
+
+ if (lsr & UART_LSR_PE) {
+ flag = TTY_PARITY;
+ up->port.icount.parity++;
+ }
+
+ if (lsr & UART_LSR_FE) {
+ flag = TTY_FRAME;
+ up->port.icount.frame++;
+ }
+
+ if (lsr & UART_LSR_OE)
+ up->port.icount.overrun++;
+
+#ifdef CONFIG_SERIAL_OMAP_CONSOLE
+ if (up->port.line == up->port.cons->index) {
+ /* Recover the break flag from console xmit */
+ lsr |= up->lsr_break_flag;
+ }
+#endif
+ uart_insert_char(&up->port, lsr, UART_LSR_OE, 0, flag);
+}
+
+static void serial_omap_rdi(struct uart_omap_port *up, unsigned int lsr)
+{
+ unsigned char ch = 0;
+ unsigned int flag;
+
+ if (!(lsr & UART_LSR_DR))
+ return;
+
+ ch = serial_in(up, UART_RX);
+ flag = TTY_NORMAL;
+ up->port.icount.rx++;
+
+ if (uart_handle_sysrq_char(&up->port, ch))
+ return;
+
+ uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag);
+}
+
/**
* serial_omap_irq() - This handles the interrupt from one port
* @irq: uart port irq number
* @dev_id: uart port info
*/
-static inline irqreturn_t serial_omap_irq(int irq, void *dev_id)
+static irqreturn_t serial_omap_irq(int irq, void *dev_id)
{
struct uart_omap_port *up = dev_id;
+ struct tty_struct *tty = up->port.state->port.tty;
unsigned int iir, lsr;
- unsigned long flags;
+ unsigned int type;
+ irqreturn_t ret = IRQ_NONE;
+ int max_count = 256;
- pm_runtime_get_sync(&up->pdev->dev);
- iir = serial_in(up, UART_IIR);
- if (iir & UART_IIR_NO_INT) {
- pm_runtime_mark_last_busy(&up->pdev->dev);
- pm_runtime_put_autosuspend(&up->pdev->dev);
- return IRQ_NONE;
- }
+ spin_lock(&up->port.lock);
+ pm_runtime_get_sync(up->dev);
- spin_lock_irqsave(&up->port.lock, flags);
- lsr = serial_in(up, UART_LSR);
- if (iir & UART_IIR_RLSI) {
- if (!up->use_dma) {
- if (lsr & UART_LSR_DR)
- receive_chars(up, &lsr);
- } else {
- up->ier &= ~(UART_IER_RDI | UART_IER_RLSI);
- serial_out(up, UART_IER, up->ier);
- if ((serial_omap_start_rxdma(up) != 0) &&
- (lsr & UART_LSR_DR))
- receive_chars(up, &lsr);
+ do {
+ iir = serial_in(up, UART_IIR);
+ if (iir & UART_IIR_NO_INT)
+ break;
+
+ ret = IRQ_HANDLED;
+ lsr = serial_in(up, UART_LSR);
+
+ /* extract IRQ type from IIR register */
+ type = iir & 0x3e;
+
+ switch (type) {
+ case UART_IIR_MSI:
+ check_modem_status(up);
+ break;
+ case UART_IIR_THRI:
+ transmit_chars(up, lsr);
+ break;
+ case UART_IIR_RX_TIMEOUT:
+ /* FALLTHROUGH */
+ case UART_IIR_RDI:
+ serial_omap_rdi(up, lsr);
+ break;
+ case UART_IIR_RLSI:
+ serial_omap_rlsi(up, lsr);
+ break;
+ case UART_IIR_CTS_RTS_DSR:
+ /* simply try again */
+ break;
+ case UART_IIR_XOFF:
+ /* FALLTHROUGH */
+ default:
+ break;
}
- }
+ } while (!(iir & UART_IIR_NO_INT) && max_count--);
- check_modem_status(up);
- if ((lsr & UART_LSR_THRE) && (iir & UART_IIR_THRI))
- transmit_chars(up);
+ spin_unlock(&up->port.lock);
- spin_unlock_irqrestore(&up->port.lock, flags);
- pm_runtime_mark_last_busy(&up->pdev->dev);
- pm_runtime_put_autosuspend(&up->pdev->dev);
+ tty_flip_buffer_push(tty);
+ pm_runtime_mark_last_busy(up->dev);
+ pm_runtime_put_autosuspend(up->dev);
up->port_activity = jiffies;
- return IRQ_HANDLED;
+
+ return ret;
}
static unsigned int serial_omap_tx_empty(struct uart_port *port)
{
- struct uart_omap_port *up = (struct uart_omap_port *)port;
+ struct uart_omap_port *up = to_uart_omap_port(port);
unsigned long flags = 0;
unsigned int ret = 0;
- pm_runtime_get_sync(&up->pdev->dev);
+ pm_runtime_get_sync(up->dev);
dev_dbg(up->port.dev, "serial_omap_tx_empty+%d\n", up->port.line);
spin_lock_irqsave(&up->port.lock, flags);
ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
spin_unlock_irqrestore(&up->port.lock, flags);
- pm_runtime_put(&up->pdev->dev);
+ pm_runtime_mark_last_busy(up->dev);
+ pm_runtime_put_autosuspend(up->dev);
return ret;
}
static unsigned int serial_omap_get_mctrl(struct uart_port *port)
{
- struct uart_omap_port *up = (struct uart_omap_port *)port;
+ struct uart_omap_port *up = to_uart_omap_port(port);
unsigned int status;
unsigned int ret = 0;
- pm_runtime_get_sync(&up->pdev->dev);
+ pm_runtime_get_sync(up->dev);
status = check_modem_status(up);
- pm_runtime_put(&up->pdev->dev);
+ pm_runtime_mark_last_busy(up->dev);
+ pm_runtime_put_autosuspend(up->dev);
dev_dbg(up->port.dev, "serial_omap_get_mctrl+%d\n", up->port.line);
@@ -487,7 +499,7 @@ static unsigned int serial_omap_get_mctrl(struct uart_port *port)
static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
- struct uart_omap_port *up = (struct uart_omap_port *)port;
+ struct uart_omap_port *up = to_uart_omap_port(port);
unsigned char mcr = 0;
dev_dbg(up->port.dev, "serial_omap_set_mctrl+%d\n", up->port.line);
@@ -502,20 +514,31 @@ static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl)
if (mctrl & TIOCM_LOOP)
mcr |= UART_MCR_LOOP;
- pm_runtime_get_sync(&up->pdev->dev);
+ pm_runtime_get_sync(up->dev);
up->mcr = serial_in(up, UART_MCR);
up->mcr |= mcr;
serial_out(up, UART_MCR, up->mcr);
- pm_runtime_put(&up->pdev->dev);
+ pm_runtime_mark_last_busy(up->dev);
+ pm_runtime_put_autosuspend(up->dev);
+
+ if (gpio_is_valid(up->DTR_gpio) &&
+ !!(mctrl & TIOCM_DTR) != up->DTR_active) {
+ up->DTR_active = !up->DTR_active;
+ if (gpio_cansleep(up->DTR_gpio))
+ schedule_work(&up->qos_work);
+ else
+ gpio_set_value(up->DTR_gpio,
+ up->DTR_active != up->DTR_inverted);
+ }
}
static void serial_omap_break_ctl(struct uart_port *port, int break_state)
{
- struct uart_omap_port *up = (struct uart_omap_port *)port;
+ struct uart_omap_port *up = to_uart_omap_port(port);
unsigned long flags = 0;
dev_dbg(up->port.dev, "serial_omap_break_ctl+%d\n", up->port.line);
- pm_runtime_get_sync(&up->pdev->dev);
+ pm_runtime_get_sync(up->dev);
spin_lock_irqsave(&up->port.lock, flags);
if (break_state == -1)
up->lcr |= UART_LCR_SBC;
@@ -523,12 +546,13 @@ static void serial_omap_break_ctl(struct uart_port *port, int break_state)
up->lcr &= ~UART_LCR_SBC;
serial_out(up, UART_LCR, up->lcr);
spin_unlock_irqrestore(&up->port.lock, flags);
- pm_runtime_put(&up->pdev->dev);
+ pm_runtime_mark_last_busy(up->dev);
+ pm_runtime_put_autosuspend(up->dev);
}
static int serial_omap_startup(struct uart_port *port)
{
- struct uart_omap_port *up = (struct uart_omap_port *)port;
+ struct uart_omap_port *up = to_uart_omap_port(port);
unsigned long flags = 0;
int retval;
@@ -542,7 +566,7 @@ static int serial_omap_startup(struct uart_port *port)
dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->port.line);
- pm_runtime_get_sync(&up->pdev->dev);
+ pm_runtime_get_sync(up->dev);
/*
* Clear the FIFO buffers and disable them.
* (they will be reenabled in set_termios())
@@ -573,20 +597,6 @@ static int serial_omap_startup(struct uart_port *port)
spin_unlock_irqrestore(&up->port.lock, flags);
up->msr_saved_flags = 0;
- if (up->use_dma) {
- free_page((unsigned long)up->port.state->xmit.buf);
- up->port.state->xmit.buf = dma_alloc_coherent(NULL,
- UART_XMIT_SIZE,
- (dma_addr_t *)&(up->uart_dma.tx_buf_dma_phys),
- 0);
- init_timer(&(up->uart_dma.rx_timer));
- up->uart_dma.rx_timer.function = serial_omap_rxdma_poll;
- up->uart_dma.rx_timer.data = up->port.line;
- /* Currently the buffer size is 4KB. Can increase it */
- up->uart_dma.rx_buf = dma_alloc_coherent(NULL,
- up->uart_dma.rx_buf_size,
- (dma_addr_t *)&(up->uart_dma.rx_buf_dma_phys), 0);
- }
/*
* Finally, enable interrupts. Note: Modem status interrupts
* are set via set_termios(), which will be occurring imminently
@@ -598,20 +608,20 @@ static int serial_omap_startup(struct uart_port *port)
/* Enable module level wake up */
serial_out(up, UART_OMAP_WER, OMAP_UART_WER_MOD_WKUP);
- pm_runtime_mark_last_busy(&up->pdev->dev);
- pm_runtime_put_autosuspend(&up->pdev->dev);
+ pm_runtime_mark_last_busy(up->dev);
+ pm_runtime_put_autosuspend(up->dev);
up->port_activity = jiffies;
return 0;
}
static void serial_omap_shutdown(struct uart_port *port)
{
- struct uart_omap_port *up = (struct uart_omap_port *)port;
+ struct uart_omap_port *up = to_uart_omap_port(port);
unsigned long flags = 0;
dev_dbg(up->port.dev, "serial_omap_shutdown+%d\n", up->port.line);
- pm_runtime_get_sync(&up->pdev->dev);
+ pm_runtime_get_sync(up->dev);
/*
* Disable interrupts from this port
*/
@@ -634,19 +644,9 @@ static void serial_omap_shutdown(struct uart_port *port)
*/
if (serial_in(up, UART_LSR) & UART_LSR_DR)
(void) serial_in(up, UART_RX);
- if (up->use_dma) {
- dma_free_coherent(up->port.dev,
- UART_XMIT_SIZE, up->port.state->xmit.buf,
- up->uart_dma.tx_buf_dma_phys);
- up->port.state->xmit.buf = NULL;
- serial_omap_stop_rx(port);
- dma_free_coherent(up->port.dev,
- up->uart_dma.rx_buf_size, up->uart_dma.rx_buf,
- up->uart_dma.rx_buf_dma_phys);
- up->uart_dma.rx_buf = NULL;
- }
- pm_runtime_put(&up->pdev->dev);
+ pm_runtime_mark_last_busy(up->dev);
+ pm_runtime_put_autosuspend(up->dev);
free_irq(up->port.irq, up);
}
@@ -667,19 +667,19 @@ serial_omap_configure_xonxoff
/*
* IXON Flag:
- * Enable XON/XOFF flow control on output.
- * Transmit XON1, XOFF1
+ * Flow control for OMAP.TX
+ * OMAP.RX should listen for XON/XOFF
*/
if (termios->c_iflag & IXON)
- up->efr |= OMAP_UART_SW_TX;
+ up->efr |= OMAP_UART_SW_RX;
/*
* IXOFF Flag:
- * Enable XON/XOFF flow control on input.
- * Receiver compares XON1, XOFF1.
+ * Flow control for OMAP.RX
+ * OMAP.TX should send XON/XOFF
*/
if (termios->c_iflag & IXOFF)
- up->efr |= OMAP_UART_SW_RX;
+ up->efr |= OMAP_UART_SW_TX;
serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
@@ -715,13 +715,16 @@ static void serial_omap_uart_qos_work(struct work_struct *work)
qos_work);
pm_qos_update_request(&up->pm_qos_request, up->latency);
+ if (gpio_is_valid(up->DTR_gpio))
+ gpio_set_value_cansleep(up->DTR_gpio,
+ up->DTR_active != up->DTR_inverted);
}
static void
serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
- struct uart_omap_port *up = (struct uart_omap_port *)port;
+ struct uart_omap_port *up = to_uart_omap_port(port);
unsigned char cval = 0;
unsigned char efr = 0;
unsigned long flags = 0;
@@ -768,14 +771,12 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
up->fcr = UART_FCR_R_TRIG_01 | UART_FCR_T_TRIG_01 |
UART_FCR_ENABLE_FIFO;
- if (up->use_dma)
- up->fcr |= UART_FCR_DMA_SELECT;
/*
* Ok, we're now changing the port state. Do it with
* interrupts disabled.
*/
- pm_runtime_get_sync(&up->pdev->dev);
+ pm_runtime_get_sync(up->dev);
spin_lock_irqsave(&up->port.lock, flags);
/*
@@ -845,14 +846,13 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
up->scr |= OMAP_UART_SCR_RX_TRIG_GRANU1_MASK;
- if (up->use_dma) {
- serial_out(up, UART_TI752_TLR, 0);
- up->scr |= UART_FCR_TRIGGER_4;
- } else {
- /* Set receive FIFO threshold to 1 byte */
- up->fcr &= ~OMAP_UART_FCR_RX_FIFO_TRIG_MASK;
- up->fcr |= (0x1 << OMAP_UART_FCR_RX_FIFO_TRIG_SHIFT);
- }
+ /* Set receive FIFO threshold to 16 characters and
+ * transmit FIFO threshold to 16 spaces
+ */
+ up->fcr &= ~OMAP_UART_FCR_RX_FIFO_TRIG_MASK;
+ up->fcr &= ~OMAP_UART_FCR_TX_FIFO_TRIG_MASK;
+ up->fcr |= UART_FCR6_R_TRIGGER_16 | UART_FCR6_T_TRIGGER_24 |
+ UART_FCR_ENABLE_FIFO;
serial_out(up, UART_FCR, up->fcr);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
@@ -924,20 +924,30 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
serial_omap_configure_xonxoff(up, termios);
spin_unlock_irqrestore(&up->port.lock, flags);
- pm_runtime_put(&up->pdev->dev);
+ pm_runtime_mark_last_busy(up->dev);
+ pm_runtime_put_autosuspend(up->dev);
dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->port.line);
}
+static int serial_omap_set_wake(struct uart_port *port, unsigned int state)
+{
+ struct uart_omap_port *up = to_uart_omap_port(port);
+
+ serial_omap_enable_wakeup(up, state);
+
+ return 0;
+}
+
static void
serial_omap_pm(struct uart_port *port, unsigned int state,
unsigned int oldstate)
{
- struct uart_omap_port *up = (struct uart_omap_port *)port;
+ struct uart_omap_port *up = to_uart_omap_port(port);
unsigned char efr;
dev_dbg(up->port.dev, "serial_omap_pm+%d\n", up->port.line);
- pm_runtime_get_sync(&up->pdev->dev);
+ pm_runtime_get_sync(up->dev);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
efr = serial_in(up, UART_EFR);
serial_out(up, UART_EFR, efr | UART_EFR_ECB);
@@ -948,14 +958,15 @@ serial_omap_pm(struct uart_port *port, unsigned int state,
serial_out(up, UART_EFR, efr);
serial_out(up, UART_LCR, 0);
- if (!device_may_wakeup(&up->pdev->dev)) {
+ if (!device_may_wakeup(up->dev)) {
if (!state)
- pm_runtime_forbid(&up->pdev->dev);
+ pm_runtime_forbid(up->dev);
else
- pm_runtime_allow(&up->pdev->dev);
+ pm_runtime_allow(up->dev);
}
- pm_runtime_put(&up->pdev->dev);
+ pm_runtime_mark_last_busy(up->dev);
+ pm_runtime_put_autosuspend(up->dev);
}
static void serial_omap_release_port(struct uart_port *port)
@@ -971,7 +982,7 @@ static int serial_omap_request_port(struct uart_port *port)
static void serial_omap_config_port(struct uart_port *port, int flags)
{
- struct uart_omap_port *up = (struct uart_omap_port *)port;
+ struct uart_omap_port *up = to_uart_omap_port(port);
dev_dbg(up->port.dev, "serial_omap_config_port+%d\n",
up->port.line);
@@ -989,7 +1000,7 @@ serial_omap_verify_port(struct uart_port *port, struct serial_struct *ser)
static const char *
serial_omap_type(struct uart_port *port)
{
- struct uart_omap_port *up = (struct uart_omap_port *)port;
+ struct uart_omap_port *up = to_uart_omap_port(port);
dev_dbg(up->port.dev, "serial_omap_type+%d\n", up->port.line);
return up->name;
@@ -1032,26 +1043,33 @@ static inline void wait_for_xmitr(struct uart_omap_port *up)
static void serial_omap_poll_put_char(struct uart_port *port, unsigned char ch)
{
- struct uart_omap_port *up = (struct uart_omap_port *)port;
+ struct uart_omap_port *up = to_uart_omap_port(port);
- pm_runtime_get_sync(&up->pdev->dev);
+ pm_runtime_get_sync(up->dev);
wait_for_xmitr(up);
serial_out(up, UART_TX, ch);
- pm_runtime_put(&up->pdev->dev);
+ pm_runtime_mark_last_busy(up->dev);
+ pm_runtime_put_autosuspend(up->dev);
}
static int serial_omap_poll_get_char(struct uart_port *port)
{
- struct uart_omap_port *up = (struct uart_omap_port *)port;
+ struct uart_omap_port *up = to_uart_omap_port(port);
unsigned int status;
- pm_runtime_get_sync(&up->pdev->dev);
+ pm_runtime_get_sync(up->dev);
status = serial_in(up, UART_LSR);
- if (!(status & UART_LSR_DR))
- return NO_POLL_CHAR;
+ if (!(status & UART_LSR_DR)) {
+ status = NO_POLL_CHAR;
+ goto out;
+ }
status = serial_in(up, UART_RX);
- pm_runtime_put(&up->pdev->dev);
+
+out:
+ pm_runtime_mark_last_busy(up->dev);
+ pm_runtime_put_autosuspend(up->dev);
+
return status;
}
@@ -1065,7 +1083,7 @@ static struct uart_driver serial_omap_reg;
static void serial_omap_console_putchar(struct uart_port *port, int ch)
{
- struct uart_omap_port *up = (struct uart_omap_port *)port;
+ struct uart_omap_port *up = to_uart_omap_port(port);
wait_for_xmitr(up);
serial_out(up, UART_TX, ch);
@@ -1080,7 +1098,7 @@ serial_omap_console_write(struct console *co, const char *s,
unsigned int ier;
int locked = 1;
- pm_runtime_get_sync(&up->pdev->dev);
+ pm_runtime_get_sync(up->dev);
local_irq_save(flags);
if (up->port.sysrq)
@@ -1114,8 +1132,8 @@ serial_omap_console_write(struct console *co, const char *s,
if (up->msr_saved_flags)
check_modem_status(up);
- pm_runtime_mark_last_busy(&up->pdev->dev);
- pm_runtime_put_autosuspend(&up->pdev->dev);
+ pm_runtime_mark_last_busy(up->dev);
+ pm_runtime_put_autosuspend(up->dev);
if (locked)
spin_unlock(&up->port.lock);
local_irq_restore(flags);
@@ -1179,6 +1197,7 @@ static struct uart_ops serial_omap_pops = {
.shutdown = serial_omap_shutdown,
.set_termios = serial_omap_set_termios,
.pm = serial_omap_pm,
+ .set_wake = serial_omap_set_wake,
.type = serial_omap_type,
.release_port = serial_omap_release_port,
.request_port = serial_omap_request_port,
@@ -1221,150 +1240,7 @@ static int serial_omap_resume(struct device *dev)
}
#endif
-static void serial_omap_rxdma_poll(unsigned long uart_no)
-{
- struct uart_omap_port *up = ui[uart_no];
- unsigned int curr_dma_pos, curr_transmitted_size;
- int ret = 0;
-
- curr_dma_pos = omap_get_dma_dst_pos(up->uart_dma.rx_dma_channel);
- if ((curr_dma_pos == up->uart_dma.prev_rx_dma_pos) ||
- (curr_dma_pos == 0)) {
- if (jiffies_to_msecs(jiffies - up->port_activity) <
- up->uart_dma.rx_timeout) {
- mod_timer(&up->uart_dma.rx_timer, jiffies +
- usecs_to_jiffies(up->uart_dma.rx_poll_rate));
- } else {
- serial_omap_stop_rxdma(up);
- up->ier |= (UART_IER_RDI | UART_IER_RLSI);
- serial_out(up, UART_IER, up->ier);
- }
- return;
- }
-
- curr_transmitted_size = curr_dma_pos -
- up->uart_dma.prev_rx_dma_pos;
- up->port.icount.rx += curr_transmitted_size;
- tty_insert_flip_string(up->port.state->port.tty,
- up->uart_dma.rx_buf +
- (up->uart_dma.prev_rx_dma_pos -
- up->uart_dma.rx_buf_dma_phys),
- curr_transmitted_size);
- tty_flip_buffer_push(up->port.state->port.tty);
- up->uart_dma.prev_rx_dma_pos = curr_dma_pos;
- if (up->uart_dma.rx_buf_size +
- up->uart_dma.rx_buf_dma_phys == curr_dma_pos) {
- ret = serial_omap_start_rxdma(up);
- if (ret < 0) {
- serial_omap_stop_rxdma(up);
- up->ier |= (UART_IER_RDI | UART_IER_RLSI);
- serial_out(up, UART_IER, up->ier);
- }
- } else {
- mod_timer(&up->uart_dma.rx_timer, jiffies +
- usecs_to_jiffies(up->uart_dma.rx_poll_rate));
- }
- up->port_activity = jiffies;
-}
-
-static void uart_rx_dma_callback(int lch, u16 ch_status, void *data)
-{
- return;
-}
-
-static int serial_omap_start_rxdma(struct uart_omap_port *up)
-{
- int ret = 0;
-
- if (up->uart_dma.rx_dma_channel == -1) {
- pm_runtime_get_sync(&up->pdev->dev);
- ret = omap_request_dma(up->uart_dma.uart_dma_rx,
- "UART Rx DMA",
- (void *)uart_rx_dma_callback, up,
- &(up->uart_dma.rx_dma_channel));
- if (ret < 0)
- return ret;
-
- omap_set_dma_src_params(up->uart_dma.rx_dma_channel, 0,
- OMAP_DMA_AMODE_CONSTANT,
- up->uart_dma.uart_base, 0, 0);
- omap_set_dma_dest_params(up->uart_dma.rx_dma_channel, 0,
- OMAP_DMA_AMODE_POST_INC,
- up->uart_dma.rx_buf_dma_phys, 0, 0);
- omap_set_dma_transfer_params(up->uart_dma.rx_dma_channel,
- OMAP_DMA_DATA_TYPE_S8,
- up->uart_dma.rx_buf_size, 1,
- OMAP_DMA_SYNC_ELEMENT,
- up->uart_dma.uart_dma_rx, 0);
- }
- up->uart_dma.prev_rx_dma_pos = up->uart_dma.rx_buf_dma_phys;
- /* FIXME: Cache maintenance needed here? */
- omap_start_dma(up->uart_dma.rx_dma_channel);
- mod_timer(&up->uart_dma.rx_timer, jiffies +
- usecs_to_jiffies(up->uart_dma.rx_poll_rate));
- up->uart_dma.rx_dma_used = true;
- return ret;
-}
-
-static void serial_omap_continue_tx(struct uart_omap_port *up)
-{
- struct circ_buf *xmit = &up->port.state->xmit;
- unsigned int start = up->uart_dma.tx_buf_dma_phys
- + (xmit->tail & (UART_XMIT_SIZE - 1));
-
- if (uart_circ_empty(xmit))
- return;
-
- up->uart_dma.tx_buf_size = uart_circ_chars_pending(xmit);
- /*
- * It is a circular buffer. See if the buffer has wounded back.
- * If yes it will have to be transferred in two separate dma
- * transfers
- */
- if (start + up->uart_dma.tx_buf_size >=
- up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE)
- up->uart_dma.tx_buf_size =
- (up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE) - start;
- omap_set_dma_dest_params(up->uart_dma.tx_dma_channel, 0,
- OMAP_DMA_AMODE_CONSTANT,
- up->uart_dma.uart_base, 0, 0);
- omap_set_dma_src_params(up->uart_dma.tx_dma_channel, 0,
- OMAP_DMA_AMODE_POST_INC, start, 0, 0);
- omap_set_dma_transfer_params(up->uart_dma.tx_dma_channel,
- OMAP_DMA_DATA_TYPE_S8,
- up->uart_dma.tx_buf_size, 1,
- OMAP_DMA_SYNC_ELEMENT,
- up->uart_dma.uart_dma_tx, 0);
- /* FIXME: Cache maintenance needed here? */
- omap_start_dma(up->uart_dma.tx_dma_channel);
-}
-
-static void uart_tx_dma_callback(int lch, u16 ch_status, void *data)
-{
- struct uart_omap_port *up = (struct uart_omap_port *)data;
- struct circ_buf *xmit = &up->port.state->xmit;
-
- xmit->tail = (xmit->tail + up->uart_dma.tx_buf_size) & \
- (UART_XMIT_SIZE - 1);
- up->port.icount.tx += up->uart_dma.tx_buf_size;
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(&up->port);
-
- if (uart_circ_empty(xmit)) {
- spin_lock(&(up->uart_dma.tx_lock));
- serial_omap_stop_tx(&up->port);
- up->uart_dma.tx_dma_used = false;
- spin_unlock(&(up->uart_dma.tx_lock));
- } else {
- omap_stop_dma(up->uart_dma.tx_dma_channel);
- serial_omap_continue_tx(up);
- }
- up->port_activity = jiffies;
- return;
-}
-
-static void omap_serial_fill_features_erratas(struct uart_omap_port *up)
+static void __devinit omap_serial_fill_features_erratas(struct uart_omap_port *up)
{
u32 mvr, scheme;
u16 revision, major, minor;
@@ -1389,7 +1265,7 @@ static void omap_serial_fill_features_erratas(struct uart_omap_port *up)
minor = (mvr & OMAP_UART_MVR_MIN_MASK);
break;
default:
- dev_warn(&up->pdev->dev,
+ dev_warn(up->dev,
"Unknown %s revision, defaulting to highest\n",
up->name);
/* highest possible revision */
@@ -1417,7 +1293,7 @@ static void omap_serial_fill_features_erratas(struct uart_omap_port *up)
}
}
-static struct omap_uart_port_info *of_get_uart_port_info(struct device *dev)
+static __devinit struct omap_uart_port_info *of_get_uart_port_info(struct device *dev)
{
struct omap_uart_port_info *omap_up_info;
@@ -1430,12 +1306,12 @@ static struct omap_uart_port_info *of_get_uart_port_info(struct device *dev)
return omap_up_info;
}
-static int serial_omap_probe(struct platform_device *pdev)
+static int __devinit serial_omap_probe(struct platform_device *pdev)
{
struct uart_omap_port *up;
- struct resource *mem, *irq, *dma_tx, *dma_rx;
+ struct resource *mem, *irq;
struct omap_uart_port_info *omap_up_info = pdev->dev.platform_data;
- int ret = -ENOSPC;
+ int ret;
if (pdev->dev.of_node)
omap_up_info = of_get_uart_port_info(&pdev->dev);
@@ -1458,19 +1334,30 @@ static int serial_omap_probe(struct platform_device *pdev)
return -EBUSY;
}
- dma_rx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx");
- if (!dma_rx)
- return -ENXIO;
-
- dma_tx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx");
- if (!dma_tx)
- return -ENXIO;
+ if (gpio_is_valid(omap_up_info->DTR_gpio) &&
+ omap_up_info->DTR_present) {
+ ret = gpio_request(omap_up_info->DTR_gpio, "omap-serial");
+ if (ret < 0)
+ return ret;
+ ret = gpio_direction_output(omap_up_info->DTR_gpio,
+ omap_up_info->DTR_inverted);
+ if (ret < 0)
+ return ret;
+ }
up = devm_kzalloc(&pdev->dev, sizeof(*up), GFP_KERNEL);
if (!up)
return -ENOMEM;
- up->pdev = pdev;
+ if (gpio_is_valid(omap_up_info->DTR_gpio) &&
+ omap_up_info->DTR_present) {
+ up->DTR_gpio = omap_up_info->DTR_gpio;
+ up->DTR_inverted = omap_up_info->DTR_inverted;
+ } else
+ up->DTR_gpio = -EINVAL;
+ up->DTR_active = 0;
+
+ up->dev = &pdev->dev;
up->port.dev = &pdev->dev;
up->port.type = PORT_OMAP;
up->port.iotype = UPIO_MEM;
@@ -1492,6 +1379,13 @@ static int serial_omap_probe(struct platform_device *pdev)
goto err_port_line;
}
+ up->pins = devm_pinctrl_get_select_default(&pdev->dev);
+ if (IS_ERR(up->pins)) {
+ dev_warn(&pdev->dev, "did not get pins for uart%i error: %li\n",
+ up->port.line, PTR_ERR(up->pins));
+ up->pins = NULL;
+ }
+
sprintf(up->name, "OMAP UART%d", up->port.line);
up->port.mapbase = mem->start;
up->port.membase = devm_ioremap(&pdev->dev, mem->start,
@@ -1509,20 +1403,6 @@ static int serial_omap_probe(struct platform_device *pdev)
dev_warn(&pdev->dev, "No clock speed specified: using default:"
"%d\n", DEFAULT_CLK_SPEED);
}
- up->uart_dma.uart_base = mem->start;
-
- if (omap_up_info->dma_enabled) {
- up->uart_dma.uart_dma_tx = dma_tx->start;
- up->uart_dma.uart_dma_rx = dma_rx->start;
- up->use_dma = 1;
- up->uart_dma.rx_buf_size = omap_up_info->dma_rx_buf_size;
- up->uart_dma.rx_timeout = omap_up_info->dma_rx_timeout;
- up->uart_dma.rx_poll_rate = omap_up_info->dma_rx_poll_rate;
- spin_lock_init(&(up->uart_dma.tx_lock));
- spin_lock_init(&(up->uart_dma.rx_lock));
- up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE;
- up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE;
- }
up->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
up->calc_latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
@@ -1531,12 +1411,13 @@ static int serial_omap_probe(struct platform_device *pdev)
serial_omap_uart_wq = create_singlethread_workqueue(up->name);
INIT_WORK(&up->qos_work, serial_omap_uart_qos_work);
+ platform_set_drvdata(pdev, up);
+ pm_runtime_enable(&pdev->dev);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_autosuspend_delay(&pdev->dev,
omap_up_info->autosuspend_timeout);
pm_runtime_irq_safe(&pdev->dev);
- pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
omap_serial_fill_features_erratas(up);
@@ -1548,8 +1429,8 @@ static int serial_omap_probe(struct platform_device *pdev)
if (ret != 0)
goto err_add_port;
- pm_runtime_put(&pdev->dev);
- platform_set_drvdata(pdev, up);
+ pm_runtime_mark_last_busy(up->dev);
+ pm_runtime_put_autosuspend(up->dev);
return 0;
err_add_port:
@@ -1562,17 +1443,15 @@ err_port_line:
return ret;
}
-static int serial_omap_remove(struct platform_device *dev)
+static int __devexit serial_omap_remove(struct platform_device *dev)
{
struct uart_omap_port *up = platform_get_drvdata(dev);
- if (up) {
- pm_runtime_disable(&up->pdev->dev);
- uart_remove_one_port(&serial_omap_reg, &up->port);
- pm_qos_remove_request(&up->pm_qos_request);
- }
+ pm_runtime_put_sync(up->dev);
+ pm_runtime_disable(up->dev);
+ uart_remove_one_port(&serial_omap_reg, &up->port);
+ pm_qos_remove_request(&up->pm_qos_request);
- platform_set_drvdata(dev, NULL);
return 0;
}
@@ -1602,7 +1481,7 @@ static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1)
timeout--;
if (!timeout) {
/* Should *never* happen. we warn and carry on */
- dev_crit(&up->pdev->dev, "Errata i202: timedout %x\n",
+ dev_crit(up->dev, "Errata i202: timedout %x\n",
serial_in(up, UART_LSR));
break;
}
@@ -1648,29 +1527,23 @@ static int serial_omap_runtime_suspend(struct device *dev)
if (!up)
return -EINVAL;
- if (!pdata || !pdata->enable_wakeup)
+ if (!pdata)
return 0;
- if (pdata->get_context_loss_count)
- up->context_loss_cnt = pdata->get_context_loss_count(dev);
+ up->context_loss_cnt = serial_omap_get_context_loss_count(up);
if (device_may_wakeup(dev)) {
if (!up->wakeups_enabled) {
- pdata->enable_wakeup(up->pdev, true);
+ serial_omap_enable_wakeup(up, true);
up->wakeups_enabled = true;
}
} else {
if (up->wakeups_enabled) {
- pdata->enable_wakeup(up->pdev, false);
+ serial_omap_enable_wakeup(up, false);
up->wakeups_enabled = false;
}
}
- /* Errata i291 */
- if (up->use_dma && pdata->set_forceidle &&
- (up->errata & UART_ERRATA_i291_DMA_FORCEIDLE))
- pdata->set_forceidle(up->pdev);
-
up->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
schedule_work(&up->qos_work);
@@ -1683,17 +1556,10 @@ static int serial_omap_runtime_resume(struct device *dev)
struct omap_uart_port_info *pdata = dev->platform_data;
if (up && pdata) {
- if (pdata->get_context_loss_count) {
- u32 loss_cnt = pdata->get_context_loss_count(dev);
+ u32 loss_cnt = serial_omap_get_context_loss_count(up);
if (up->context_loss_cnt != loss_cnt)
serial_omap_restore_context(up);
- }
-
- /* Errata i291 */
- if (up->use_dma && pdata->set_noidle &&
- (up->errata & UART_ERRATA_i291_DMA_FORCEIDLE))
- pdata->set_noidle(up->pdev);
up->latency = up->calc_latency;
schedule_work(&up->qos_work);
@@ -1721,7 +1587,7 @@ MODULE_DEVICE_TABLE(of, omap_serial_of_match);
static struct platform_driver serial_omap_driver = {
.probe = serial_omap_probe,
- .remove = serial_omap_remove,
+ .remove = __devexit_p(serial_omap_remove),
.driver = {
.name = DRIVER_NAME,
.pm = &serial_omap_dev_pm_ops,
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 558ce8509a9..4cd6c238152 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -979,6 +979,10 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv)
priv->tx_dma_use = 1;
priv->sg_tx_p = kzalloc(sizeof(struct scatterlist)*num, GFP_ATOMIC);
+ if (!priv->sg_tx_p) {
+ dev_err(priv->port.dev, "%s:kzalloc Failed\n", __func__);
+ return 0;
+ }
sg_init_table(priv->sg_tx_p, num); /* Initialize SG table */
sg = priv->sg_tx_p;
diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index 5847a4b855f..9033fc6e0e4 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -670,9 +670,19 @@ serial_pxa_console_write(struct console *co, const char *s, unsigned int count)
{
struct uart_pxa_port *up = serial_pxa_ports[co->index];
unsigned int ier;
+ unsigned long flags;
+ int locked = 1;
clk_prepare_enable(up->clk);
+ local_irq_save(flags);
+ if (up->port.sysrq)
+ locked = 0;
+ else if (oops_in_progress)
+ locked = spin_trylock(&up->port.lock);
+ else
+ spin_lock(&up->port.lock);
+
/*
* First save the IER then disable the interrupts
*/
@@ -688,6 +698,10 @@ serial_pxa_console_write(struct console *co, const char *s, unsigned int count)
wait_for_xmitr(up);
serial_out(up, UART_IER, ier);
+ if (locked)
+ spin_unlock(&up->port.lock);
+ local_irq_restore(flags);
+
clk_disable_unprepare(up->clk);
}
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 02d07bfcfa8..bdaa06f3ab6 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -82,7 +82,7 @@ static inline const char *s3c24xx_serial_portname(struct uart_port *port)
static int s3c24xx_serial_txempty_nofifo(struct uart_port *port)
{
- return (rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE);
+ return rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE;
}
/*
@@ -268,7 +268,7 @@ s3c24xx_serial_rx_chars(int irq, void *dev_id)
dbg("break!\n");
port->icount.brk++;
if (uart_handle_break(port))
- goto ignore_char;
+ goto ignore_char;
}
if (uerstat & S3C2410_UERSTAT_FRAME)
@@ -459,7 +459,7 @@ static int s3c24xx_serial_startup(struct uart_port *port)
s3c24xx_serial_portname(port), ourport);
if (ret != 0) {
- printk(KERN_ERR "cannot get irq %d\n", ourport->rx_irq);
+ dev_err(port->dev, "cannot get irq %d\n", ourport->rx_irq);
return ret;
}
@@ -473,7 +473,7 @@ static int s3c24xx_serial_startup(struct uart_port *port)
s3c24xx_serial_portname(port), ourport);
if (ret) {
- printk(KERN_ERR "cannot get irq %d\n", ourport->tx_irq);
+ dev_err(port->dev, "cannot get irq %d\n", ourport->tx_irq);
goto err;
}
@@ -502,7 +502,7 @@ static int s3c64xx_serial_startup(struct uart_port *port)
ret = request_irq(port->irq, s3c64xx_serial_handle_irq, IRQF_SHARED,
s3c24xx_serial_portname(port), ourport);
if (ret) {
- printk(KERN_ERR "cannot get irq %d\n", port->irq);
+ dev_err(port->dev, "cannot get irq %d\n", port->irq);
return ret;
}
@@ -529,7 +529,7 @@ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
switch (level) {
case 3:
- if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
+ if (!IS_ERR(ourport->baudclk))
clk_disable(ourport->baudclk);
clk_disable(ourport->clk);
@@ -538,12 +538,12 @@ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
case 0:
clk_enable(ourport->clk);
- if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
+ if (!IS_ERR(ourport->baudclk))
clk_enable(ourport->baudclk);
break;
default:
- printk(KERN_ERR "s3c24xx_serial: unknown pm %d\n", level);
+ dev_err(port->dev, "s3c24xx_serial: unknown pm %d\n", level);
}
}
@@ -604,7 +604,6 @@ static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport,
char clkname[MAX_CLK_NAME_LENGTH];
int calc_deviation, deviation = (1 << 30) - 1;
- *best_clk = NULL;
clk_sel = (ourport->cfg->clk_sel) ? ourport->cfg->clk_sel :
ourport->info->def_clk_sel;
for (cnt = 0; cnt < info->num_clks; cnt++) {
@@ -613,7 +612,7 @@ static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport,
sprintf(clkname, "clk_uart_baud%d", cnt);
clk = clk_get(ourport->port.dev, clkname);
- if (IS_ERR_OR_NULL(clk))
+ if (IS_ERR(clk))
continue;
rate = clk_get_rate(clk);
@@ -684,7 +683,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
{
struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
struct s3c24xx_uart_port *ourport = to_ourport(port);
- struct clk *clk = NULL;
+ struct clk *clk = ERR_PTR(-EINVAL);
unsigned long flags;
unsigned int baud, quot, clk_sel = 0;
unsigned int ulcon;
@@ -705,7 +704,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
quot = s3c24xx_serial_getclk(ourport, baud, &clk, &clk_sel);
if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST)
quot = port->custom_divisor;
- if (!clk)
+ if (IS_ERR(clk))
return;
/* check to see if we need to change clock source */
@@ -713,9 +712,9 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
if (ourport->baudclk != clk) {
s3c24xx_serial_setsource(port, clk_sel);
- if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
+ if (!IS_ERR(ourport->baudclk)) {
clk_disable(ourport->baudclk);
- ourport->baudclk = NULL;
+ ourport->baudclk = ERR_PTR(-EINVAL);
}
clk_enable(clk);
@@ -1036,10 +1035,10 @@ static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb,
if (tty == NULL)
goto exit;
- termios = tty->termios;
+ termios = &tty->termios;
if (termios == NULL) {
- printk(KERN_WARNING "%s: no termios?\n", __func__);
+ dev_warn(uport->dev, "%s: no termios?\n", __func__);
goto exit;
}
@@ -1114,7 +1113,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
res = platform_get_resource(platdev, IORESOURCE_MEM, 0);
if (res == NULL) {
- printk(KERN_ERR "failed to find memory resource for uart\n");
+ dev_err(port->dev, "failed to find memory resource for uart\n");
return -EINVAL;
}
@@ -1130,7 +1129,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
ourport->rx_irq = ret;
ourport->tx_irq = ret + 1;
}
-
+
ret = platform_get_irq(platdev, 1);
if (ret > 0)
ourport->tx_irq = ret;
@@ -1160,7 +1159,11 @@ static ssize_t s3c24xx_serial_show_clksrc(struct device *dev,
struct uart_port *port = s3c24xx_dev_to_port(dev);
struct s3c24xx_uart_port *ourport = to_ourport(port);
- return snprintf(buf, PAGE_SIZE, "* %s\n", ourport->baudclk->name);
+ if (IS_ERR(ourport->baudclk))
+ return -EINVAL;
+
+ return snprintf(buf, PAGE_SIZE, "* %s\n",
+ ourport->baudclk->name ?: "(null)");
}
static DEVICE_ATTR(clock_source, S_IRUGO, s3c24xx_serial_show_clksrc, NULL);
@@ -1200,6 +1203,7 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
return -ENODEV;
}
+ ourport->baudclk = ERR_PTR(-EINVAL);
ourport->info = ourport->drv_data->info;
ourport->cfg = (pdev->dev.platform_data) ?
(struct s3c2410_uartcfg *)pdev->dev.platform_data :
@@ -1387,7 +1391,7 @@ s3c24xx_serial_get_options(struct uart_port *port, int *baud,
sprintf(clk_name, "clk_uart_baud%d", clk_sel);
clk = clk_get(port->dev, clk_name);
- if (!IS_ERR(clk) && clk != NULL)
+ if (!IS_ERR(clk))
rate = clk_get_rate(clk);
else
rate = 1;
@@ -1679,7 +1683,7 @@ static int __init s3c24xx_serial_modinit(void)
ret = uart_register_driver(&s3c24xx_uart_drv);
if (ret < 0) {
- printk(KERN_ERR "failed to register UART driver\n");
+ pr_err("Failed to register Samsung UART driver\n");
return -1;
}
diff --git a/drivers/tty/serial/sc26xx.c b/drivers/tty/serial/sc26xx.c
index e0b4b0a30a5..9d664242b31 100644
--- a/drivers/tty/serial/sc26xx.c
+++ b/drivers/tty/serial/sc26xx.c
@@ -20,6 +20,10 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
+#include <linux/io.h>
+
+#warning "Please try migrate to use new driver SCCNXP and report the status" \
+ "in the linux-serial mailing list."
#if defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c
new file mode 100644
index 00000000000..05d767cf82a
--- /dev/null
+++ b/drivers/tty/serial/sccnxp.c
@@ -0,0 +1,985 @@
+/*
+ * NXP (Philips) SCC+++(SCN+++) serial driver
+ *
+ * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * Based on sc26xx.c, by Thomas Bogendörfer (tsbogend@alpha.franken.de)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#if defined(CONFIG_SERIAL_SCCNXP_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/console.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/io.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/sccnxp.h>
+
+#define SCCNXP_NAME "uart-sccnxp"
+#define SCCNXP_MAJOR 204
+#define SCCNXP_MINOR 205
+
+#define SCCNXP_MR_REG (0x00)
+# define MR0_BAUD_NORMAL (0 << 0)
+# define MR0_BAUD_EXT1 (1 << 0)
+# define MR0_BAUD_EXT2 (5 << 0)
+# define MR0_FIFO (1 << 3)
+# define MR0_TXLVL (1 << 4)
+# define MR1_BITS_5 (0 << 0)
+# define MR1_BITS_6 (1 << 0)
+# define MR1_BITS_7 (2 << 0)
+# define MR1_BITS_8 (3 << 0)
+# define MR1_PAR_EVN (0 << 2)
+# define MR1_PAR_ODD (1 << 2)
+# define MR1_PAR_NO (4 << 2)
+# define MR2_STOP1 (7 << 0)
+# define MR2_STOP2 (0xf << 0)
+#define SCCNXP_SR_REG (0x01)
+#define SCCNXP_CSR_REG SCCNXP_SR_REG
+# define SR_RXRDY (1 << 0)
+# define SR_FULL (1 << 1)
+# define SR_TXRDY (1 << 2)
+# define SR_TXEMT (1 << 3)
+# define SR_OVR (1 << 4)
+# define SR_PE (1 << 5)
+# define SR_FE (1 << 6)
+# define SR_BRK (1 << 7)
+#define SCCNXP_CR_REG (0x02)
+# define CR_RX_ENABLE (1 << 0)
+# define CR_RX_DISABLE (1 << 1)
+# define CR_TX_ENABLE (1 << 2)
+# define CR_TX_DISABLE (1 << 3)
+# define CR_CMD_MRPTR1 (0x01 << 4)
+# define CR_CMD_RX_RESET (0x02 << 4)
+# define CR_CMD_TX_RESET (0x03 << 4)
+# define CR_CMD_STATUS_RESET (0x04 << 4)
+# define CR_CMD_BREAK_RESET (0x05 << 4)
+# define CR_CMD_START_BREAK (0x06 << 4)
+# define CR_CMD_STOP_BREAK (0x07 << 4)
+# define CR_CMD_MRPTR0 (0x0b << 4)
+#define SCCNXP_RHR_REG (0x03)
+#define SCCNXP_THR_REG SCCNXP_RHR_REG
+#define SCCNXP_IPCR_REG (0x04)
+#define SCCNXP_ACR_REG SCCNXP_IPCR_REG
+# define ACR_BAUD0 (0 << 7)
+# define ACR_BAUD1 (1 << 7)
+# define ACR_TIMER_MODE (6 << 4)
+#define SCCNXP_ISR_REG (0x05)
+#define SCCNXP_IMR_REG SCCNXP_ISR_REG
+# define IMR_TXRDY (1 << 0)
+# define IMR_RXRDY (1 << 1)
+# define ISR_TXRDY(x) (1 << ((x * 4) + 0))
+# define ISR_RXRDY(x) (1 << ((x * 4) + 1))
+#define SCCNXP_IPR_REG (0x0d)
+#define SCCNXP_OPCR_REG SCCNXP_IPR_REG
+#define SCCNXP_SOP_REG (0x0e)
+#define SCCNXP_ROP_REG (0x0f)
+
+/* Route helpers */
+#define MCTRL_MASK(sig) (0xf << (sig))
+#define MCTRL_IBIT(cfg, sig) ((((cfg) >> (sig)) & 0xf) - LINE_IP0)
+#define MCTRL_OBIT(cfg, sig) ((((cfg) >> (sig)) & 0xf) - LINE_OP0)
+
+/* Supported chip types */
+enum {
+ SCCNXP_TYPE_SC2681 = 2681,
+ SCCNXP_TYPE_SC2691 = 2691,
+ SCCNXP_TYPE_SC2692 = 2692,
+ SCCNXP_TYPE_SC2891 = 2891,
+ SCCNXP_TYPE_SC2892 = 2892,
+ SCCNXP_TYPE_SC28202 = 28202,
+ SCCNXP_TYPE_SC68681 = 68681,
+ SCCNXP_TYPE_SC68692 = 68692,
+};
+
+struct sccnxp_port {
+ struct uart_driver uart;
+ struct uart_port port[SCCNXP_MAX_UARTS];
+
+ const char *name;
+ int irq;
+
+ u8 imr;
+ u8 addr_mask;
+ int freq_std;
+
+ int flags;
+#define SCCNXP_HAVE_IO 0x00000001
+#define SCCNXP_HAVE_MR0 0x00000002
+
+#ifdef CONFIG_SERIAL_SCCNXP_CONSOLE
+ struct console console;
+#endif
+
+ struct mutex sccnxp_mutex;
+
+ struct sccnxp_pdata pdata;
+};
+
+static inline u8 sccnxp_raw_read(void __iomem *base, u8 reg, u8 shift)
+{
+ return readb(base + (reg << shift));
+}
+
+static inline void sccnxp_raw_write(void __iomem *base, u8 reg, u8 shift, u8 v)
+{
+ writeb(v, base + (reg << shift));
+}
+
+static inline u8 sccnxp_read(struct uart_port *port, u8 reg)
+{
+ struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+ return sccnxp_raw_read(port->membase, reg & s->addr_mask,
+ port->regshift);
+}
+
+static inline void sccnxp_write(struct uart_port *port, u8 reg, u8 v)
+{
+ struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+ sccnxp_raw_write(port->membase, reg & s->addr_mask, port->regshift, v);
+}
+
+static inline u8 sccnxp_port_read(struct uart_port *port, u8 reg)
+{
+ return sccnxp_read(port, (port->line << 3) + reg);
+}
+
+static inline void sccnxp_port_write(struct uart_port *port, u8 reg, u8 v)
+{
+ sccnxp_write(port, (port->line << 3) + reg, v);
+}
+
+static int sccnxp_update_best_err(int a, int b, int *besterr)
+{
+ int err = abs(a - b);
+
+ if ((*besterr < 0) || (*besterr > err)) {
+ *besterr = err;
+ return 0;
+ }
+
+ return 1;
+}
+
+struct baud_table {
+ u8 csr;
+ u8 acr;
+ u8 mr0;
+ int baud;
+};
+
+const struct baud_table baud_std[] = {
+ { 0, ACR_BAUD0, MR0_BAUD_NORMAL, 50, },
+ { 0, ACR_BAUD1, MR0_BAUD_NORMAL, 75, },
+ { 1, ACR_BAUD0, MR0_BAUD_NORMAL, 110, },
+ { 2, ACR_BAUD0, MR0_BAUD_NORMAL, 134, },
+ { 3, ACR_BAUD1, MR0_BAUD_NORMAL, 150, },
+ { 3, ACR_BAUD0, MR0_BAUD_NORMAL, 200, },
+ { 4, ACR_BAUD0, MR0_BAUD_NORMAL, 300, },
+ { 0, ACR_BAUD1, MR0_BAUD_EXT1, 450, },
+ { 1, ACR_BAUD0, MR0_BAUD_EXT2, 880, },
+ { 3, ACR_BAUD1, MR0_BAUD_EXT1, 900, },
+ { 5, ACR_BAUD0, MR0_BAUD_NORMAL, 600, },
+ { 7, ACR_BAUD0, MR0_BAUD_NORMAL, 1050, },
+ { 2, ACR_BAUD0, MR0_BAUD_EXT2, 1076, },
+ { 6, ACR_BAUD0, MR0_BAUD_NORMAL, 1200, },
+ { 10, ACR_BAUD1, MR0_BAUD_NORMAL, 1800, },
+ { 7, ACR_BAUD1, MR0_BAUD_NORMAL, 2000, },
+ { 8, ACR_BAUD0, MR0_BAUD_NORMAL, 2400, },
+ { 5, ACR_BAUD1, MR0_BAUD_EXT1, 3600, },
+ { 9, ACR_BAUD0, MR0_BAUD_NORMAL, 4800, },
+ { 10, ACR_BAUD0, MR0_BAUD_NORMAL, 7200, },
+ { 11, ACR_BAUD0, MR0_BAUD_NORMAL, 9600, },
+ { 8, ACR_BAUD0, MR0_BAUD_EXT1, 14400, },
+ { 12, ACR_BAUD1, MR0_BAUD_NORMAL, 19200, },
+ { 9, ACR_BAUD0, MR0_BAUD_EXT1, 28800, },
+ { 12, ACR_BAUD0, MR0_BAUD_NORMAL, 38400, },
+ { 11, ACR_BAUD0, MR0_BAUD_EXT1, 57600, },
+ { 12, ACR_BAUD1, MR0_BAUD_EXT1, 115200, },
+ { 12, ACR_BAUD0, MR0_BAUD_EXT1, 230400, },
+ { 0, 0, 0, 0 }
+};
+
+static void sccnxp_set_baud(struct uart_port *port, int baud)
+{
+ struct sccnxp_port *s = dev_get_drvdata(port->dev);
+ int div_std, tmp_baud, bestbaud = baud, besterr = -1;
+ u8 i, acr = 0, csr = 0, mr0 = 0;
+
+ /* Find best baud from table */
+ for (i = 0; baud_std[i].baud && besterr; i++) {
+ if (baud_std[i].mr0 && !(s->flags & SCCNXP_HAVE_MR0))
+ continue;
+ div_std = DIV_ROUND_CLOSEST(s->freq_std, baud_std[i].baud);
+ tmp_baud = DIV_ROUND_CLOSEST(port->uartclk, div_std);
+ if (!sccnxp_update_best_err(baud, tmp_baud, &besterr)) {
+ acr = baud_std[i].acr;
+ csr = baud_std[i].csr;
+ mr0 = baud_std[i].mr0;
+ bestbaud = tmp_baud;
+ }
+ }
+
+ if (s->flags & SCCNXP_HAVE_MR0) {
+ /* Enable FIFO, set half level for TX */
+ mr0 |= MR0_FIFO | MR0_TXLVL;
+ /* Update MR0 */
+ sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_MRPTR0);
+ sccnxp_port_write(port, SCCNXP_MR_REG, mr0);
+ }
+
+ sccnxp_port_write(port, SCCNXP_ACR_REG, acr | ACR_TIMER_MODE);
+ sccnxp_port_write(port, SCCNXP_CSR_REG, (csr << 4) | csr);
+
+ dev_dbg(port->dev, "Baudrate desired: %i, calculated: %i\n",
+ baud, bestbaud);
+}
+
+static void sccnxp_enable_irq(struct uart_port *port, int mask)
+{
+ struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+ s->imr |= mask << (port->line * 4);
+ sccnxp_write(port, SCCNXP_IMR_REG, s->imr);
+}
+
+static void sccnxp_disable_irq(struct uart_port *port, int mask)
+{
+ struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+ s->imr &= ~(mask << (port->line * 4));
+ sccnxp_write(port, SCCNXP_IMR_REG, s->imr);
+}
+
+static void sccnxp_set_bit(struct uart_port *port, int sig, int state)
+{
+ u8 bitmask;
+ struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+ if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(sig)) {
+ bitmask = 1 << MCTRL_OBIT(s->pdata.mctrl_cfg[port->line], sig);
+ if (state)
+ sccnxp_write(port, SCCNXP_SOP_REG, bitmask);
+ else
+ sccnxp_write(port, SCCNXP_ROP_REG, bitmask);
+ }
+}
+
+static void sccnxp_handle_rx(struct uart_port *port)
+{
+ u8 sr;
+ unsigned int ch, flag;
+ struct tty_struct *tty = tty_port_tty_get(&port->state->port);
+
+ if (!tty)
+ return;
+
+ for (;;) {
+ sr = sccnxp_port_read(port, SCCNXP_SR_REG);
+ if (!(sr & SR_RXRDY))
+ break;
+ sr &= SR_PE | SR_FE | SR_OVR | SR_BRK;
+
+ ch = sccnxp_port_read(port, SCCNXP_RHR_REG);
+
+ port->icount.rx++;
+ flag = TTY_NORMAL;
+
+ if (unlikely(sr)) {
+ if (sr & SR_BRK) {
+ port->icount.brk++;
+ if (uart_handle_break(port))
+ continue;
+ } else if (sr & SR_PE)
+ port->icount.parity++;
+ else if (sr & SR_FE)
+ port->icount.frame++;
+ else if (sr & SR_OVR)
+ port->icount.overrun++;
+
+ sr &= port->read_status_mask;
+ if (sr & SR_BRK)
+ flag = TTY_BREAK;
+ else if (sr & SR_PE)
+ flag = TTY_PARITY;
+ else if (sr & SR_FE)
+ flag = TTY_FRAME;
+ else if (sr & SR_OVR)
+ flag = TTY_OVERRUN;
+ }
+
+ if (uart_handle_sysrq_char(port, ch))
+ continue;
+
+ if (sr & port->ignore_status_mask)
+ continue;
+
+ uart_insert_char(port, sr, SR_OVR, ch, flag);
+ }
+
+ tty_flip_buffer_push(tty);
+
+ tty_kref_put(tty);
+}
+
+static void sccnxp_handle_tx(struct uart_port *port)
+{
+ u8 sr;
+ struct circ_buf *xmit = &port->state->xmit;
+ struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+ if (unlikely(port->x_char)) {
+ sccnxp_port_write(port, SCCNXP_THR_REG, port->x_char);
+ port->icount.tx++;
+ port->x_char = 0;
+ return;
+ }
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ /* Disable TX if FIFO is empty */
+ if (sccnxp_port_read(port, SCCNXP_SR_REG) & SR_TXEMT) {
+ sccnxp_disable_irq(port, IMR_TXRDY);
+
+ /* Set direction to input */
+ if (s->flags & SCCNXP_HAVE_IO)
+ sccnxp_set_bit(port, DIR_OP, 0);
+ }
+ return;
+ }
+
+ while (!uart_circ_empty(xmit)) {
+ sr = sccnxp_port_read(port, SCCNXP_SR_REG);
+ if (!(sr & SR_TXRDY))
+ break;
+
+ sccnxp_port_write(port, SCCNXP_THR_REG, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+}
+
+static irqreturn_t sccnxp_ist(int irq, void *dev_id)
+{
+ int i;
+ u8 isr;
+ struct sccnxp_port *s = (struct sccnxp_port *)dev_id;
+
+ mutex_lock(&s->sccnxp_mutex);
+
+ for (;;) {
+ isr = sccnxp_read(&s->port[0], SCCNXP_ISR_REG);
+ isr &= s->imr;
+ if (!isr)
+ break;
+
+ dev_dbg(s->port[0].dev, "IRQ status: 0x%02x\n", isr);
+
+ for (i = 0; i < s->uart.nr; i++) {
+ if (isr & ISR_RXRDY(i))
+ sccnxp_handle_rx(&s->port[i]);
+ if (isr & ISR_TXRDY(i))
+ sccnxp_handle_tx(&s->port[i]);
+ }
+ }
+
+ mutex_unlock(&s->sccnxp_mutex);
+
+ return IRQ_HANDLED;
+}
+
+static void sccnxp_start_tx(struct uart_port *port)
+{
+ struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+ mutex_lock(&s->sccnxp_mutex);
+
+ /* Set direction to output */
+ if (s->flags & SCCNXP_HAVE_IO)
+ sccnxp_set_bit(port, DIR_OP, 1);
+
+ sccnxp_enable_irq(port, IMR_TXRDY);
+
+ mutex_unlock(&s->sccnxp_mutex);
+}
+
+static void sccnxp_stop_tx(struct uart_port *port)
+{
+ /* Do nothing */
+}
+
+static void sccnxp_stop_rx(struct uart_port *port)
+{
+ struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+ mutex_lock(&s->sccnxp_mutex);
+ sccnxp_port_write(port, SCCNXP_CR_REG, CR_RX_DISABLE);
+ mutex_unlock(&s->sccnxp_mutex);
+}
+
+static unsigned int sccnxp_tx_empty(struct uart_port *port)
+{
+ u8 val;
+ struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+ mutex_lock(&s->sccnxp_mutex);
+ val = sccnxp_port_read(port, SCCNXP_SR_REG);
+ mutex_unlock(&s->sccnxp_mutex);
+
+ return (val & SR_TXEMT) ? TIOCSER_TEMT : 0;
+}
+
+static void sccnxp_enable_ms(struct uart_port *port)
+{
+ /* Do nothing */
+}
+
+static void sccnxp_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+ if (!(s->flags & SCCNXP_HAVE_IO))
+ return;
+
+ mutex_lock(&s->sccnxp_mutex);
+
+ sccnxp_set_bit(port, DTR_OP, mctrl & TIOCM_DTR);
+ sccnxp_set_bit(port, RTS_OP, mctrl & TIOCM_RTS);
+
+ mutex_unlock(&s->sccnxp_mutex);
+}
+
+static unsigned int sccnxp_get_mctrl(struct uart_port *port)
+{
+ u8 bitmask, ipr;
+ struct sccnxp_port *s = dev_get_drvdata(port->dev);
+ unsigned int mctrl = TIOCM_DSR | TIOCM_CTS | TIOCM_CAR;
+
+ if (!(s->flags & SCCNXP_HAVE_IO))
+ return mctrl;
+
+ mutex_lock(&s->sccnxp_mutex);
+
+ ipr = ~sccnxp_read(port, SCCNXP_IPCR_REG);
+
+ if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(DSR_IP)) {
+ bitmask = 1 << MCTRL_IBIT(s->pdata.mctrl_cfg[port->line],
+ DSR_IP);
+ mctrl &= ~TIOCM_DSR;
+ mctrl |= (ipr & bitmask) ? TIOCM_DSR : 0;
+ }
+ if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(CTS_IP)) {
+ bitmask = 1 << MCTRL_IBIT(s->pdata.mctrl_cfg[port->line],
+ CTS_IP);
+ mctrl &= ~TIOCM_CTS;
+ mctrl |= (ipr & bitmask) ? TIOCM_CTS : 0;
+ }
+ if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(DCD_IP)) {
+ bitmask = 1 << MCTRL_IBIT(s->pdata.mctrl_cfg[port->line],
+ DCD_IP);
+ mctrl &= ~TIOCM_CAR;
+ mctrl |= (ipr & bitmask) ? TIOCM_CAR : 0;
+ }
+ if (s->pdata.mctrl_cfg[port->line] & MCTRL_MASK(RNG_IP)) {
+ bitmask = 1 << MCTRL_IBIT(s->pdata.mctrl_cfg[port->line],
+ RNG_IP);
+ mctrl &= ~TIOCM_RNG;
+ mctrl |= (ipr & bitmask) ? TIOCM_RNG : 0;
+ }
+
+ mutex_unlock(&s->sccnxp_mutex);
+
+ return mctrl;
+}
+
+static void sccnxp_break_ctl(struct uart_port *port, int break_state)
+{
+ struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+ mutex_lock(&s->sccnxp_mutex);
+ sccnxp_port_write(port, SCCNXP_CR_REG, break_state ?
+ CR_CMD_START_BREAK : CR_CMD_STOP_BREAK);
+ mutex_unlock(&s->sccnxp_mutex);
+}
+
+static void sccnxp_set_termios(struct uart_port *port,
+ struct ktermios *termios, struct ktermios *old)
+{
+ struct sccnxp_port *s = dev_get_drvdata(port->dev);
+ u8 mr1, mr2;
+ int baud;
+
+ mutex_lock(&s->sccnxp_mutex);
+
+ /* Mask termios capabilities we don't support */
+ termios->c_cflag &= ~CMSPAR;
+ termios->c_iflag &= ~(IXON | IXOFF | IXANY);
+
+ /* Disable RX & TX, reset break condition, status and FIFOs */
+ sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_RX_RESET |
+ CR_RX_DISABLE | CR_TX_DISABLE);
+ sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_TX_RESET);
+ sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_STATUS_RESET);
+ sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_BREAK_RESET);
+
+ /* Word size */
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ mr1 = MR1_BITS_5;
+ break;
+ case CS6:
+ mr1 = MR1_BITS_6;
+ break;
+ case CS7:
+ mr1 = MR1_BITS_7;
+ break;
+ default:
+ case CS8:
+ mr1 = MR1_BITS_8;
+ break;
+ }
+
+ /* Parity */
+ if (termios->c_cflag & PARENB) {
+ if (termios->c_cflag & PARODD)
+ mr1 |= MR1_PAR_ODD;
+ } else
+ mr1 |= MR1_PAR_NO;
+
+ /* Stop bits */
+ mr2 = (termios->c_cflag & CSTOPB) ? MR2_STOP2 : MR2_STOP1;
+
+ /* Update desired format */
+ sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_MRPTR1);
+ sccnxp_port_write(port, SCCNXP_MR_REG, mr1);
+ sccnxp_port_write(port, SCCNXP_MR_REG, mr2);
+
+ /* Set read status mask */
+ port->read_status_mask = SR_OVR;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= SR_PE | SR_FE;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ port->read_status_mask |= SR_BRK;
+
+ /* Set status ignore mask */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNBRK)
+ port->ignore_status_mask |= SR_BRK;
+ if (!(termios->c_cflag & CREAD))
+ port->ignore_status_mask |= SR_PE | SR_OVR | SR_FE | SR_BRK;
+
+ /* Setup baudrate */
+ baud = uart_get_baud_rate(port, termios, old, 50,
+ (s->flags & SCCNXP_HAVE_MR0) ?
+ 230400 : 38400);
+ sccnxp_set_baud(port, baud);
+
+ /* Update timeout according to new baud rate */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ /* Enable RX & TX */
+ sccnxp_port_write(port, SCCNXP_CR_REG, CR_RX_ENABLE | CR_TX_ENABLE);
+
+ mutex_unlock(&s->sccnxp_mutex);
+}
+
+static int sccnxp_startup(struct uart_port *port)
+{
+ struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+ mutex_lock(&s->sccnxp_mutex);
+
+ if (s->flags & SCCNXP_HAVE_IO) {
+ /* Outputs are controlled manually */
+ sccnxp_write(port, SCCNXP_OPCR_REG, 0);
+ }
+
+ /* Reset break condition, status and FIFOs */
+ sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_RX_RESET);
+ sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_TX_RESET);
+ sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_STATUS_RESET);
+ sccnxp_port_write(port, SCCNXP_CR_REG, CR_CMD_BREAK_RESET);
+
+ /* Enable RX & TX */
+ sccnxp_port_write(port, SCCNXP_CR_REG, CR_RX_ENABLE | CR_TX_ENABLE);
+
+ /* Enable RX interrupt */
+ sccnxp_enable_irq(port, IMR_RXRDY);
+
+ mutex_unlock(&s->sccnxp_mutex);
+
+ return 0;
+}
+
+static void sccnxp_shutdown(struct uart_port *port)
+{
+ struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+ mutex_lock(&s->sccnxp_mutex);
+
+ /* Disable interrupts */
+ sccnxp_disable_irq(port, IMR_TXRDY | IMR_RXRDY);
+
+ /* Disable TX & RX */
+ sccnxp_port_write(port, SCCNXP_CR_REG, CR_RX_DISABLE | CR_TX_DISABLE);
+
+ /* Leave direction to input */
+ if (s->flags & SCCNXP_HAVE_IO)
+ sccnxp_set_bit(port, DIR_OP, 0);
+
+ mutex_unlock(&s->sccnxp_mutex);
+}
+
+static const char *sccnxp_type(struct uart_port *port)
+{
+ struct sccnxp_port *s = dev_get_drvdata(port->dev);
+
+ return (port->type == PORT_SC26XX) ? s->name : NULL;
+}
+
+static void sccnxp_release_port(struct uart_port *port)
+{
+ /* Do nothing */
+}
+
+static int sccnxp_request_port(struct uart_port *port)
+{
+ /* Do nothing */
+ return 0;
+}
+
+static void sccnxp_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE)
+ port->type = PORT_SC26XX;
+}
+
+static int sccnxp_verify_port(struct uart_port *port, struct serial_struct *s)
+{
+ if ((s->type == PORT_UNKNOWN) || (s->type == PORT_SC26XX))
+ return 0;
+ if (s->irq == port->irq)
+ return 0;
+
+ return -EINVAL;
+}
+
+static const struct uart_ops sccnxp_ops = {
+ .tx_empty = sccnxp_tx_empty,
+ .set_mctrl = sccnxp_set_mctrl,
+ .get_mctrl = sccnxp_get_mctrl,
+ .stop_tx = sccnxp_stop_tx,
+ .start_tx = sccnxp_start_tx,
+ .stop_rx = sccnxp_stop_rx,
+ .enable_ms = sccnxp_enable_ms,
+ .break_ctl = sccnxp_break_ctl,
+ .startup = sccnxp_startup,
+ .shutdown = sccnxp_shutdown,
+ .set_termios = sccnxp_set_termios,
+ .type = sccnxp_type,
+ .release_port = sccnxp_release_port,
+ .request_port = sccnxp_request_port,
+ .config_port = sccnxp_config_port,
+ .verify_port = sccnxp_verify_port,
+};
+
+#ifdef CONFIG_SERIAL_SCCNXP_CONSOLE
+static void sccnxp_console_putchar(struct uart_port *port, int c)
+{
+ int tryes = 100000;
+
+ while (tryes--) {
+ if (sccnxp_port_read(port, SCCNXP_SR_REG) & SR_TXRDY) {
+ sccnxp_port_write(port, SCCNXP_THR_REG, c);
+ break;
+ }
+ barrier();
+ }
+}
+
+static void sccnxp_console_write(struct console *co, const char *c, unsigned n)
+{
+ struct sccnxp_port *s = (struct sccnxp_port *)co->data;
+ struct uart_port *port = &s->port[co->index];
+
+ mutex_lock(&s->sccnxp_mutex);
+ uart_console_write(port, c, n, sccnxp_console_putchar);
+ mutex_unlock(&s->sccnxp_mutex);
+}
+
+static int sccnxp_console_setup(struct console *co, char *options)
+{
+ struct sccnxp_port *s = (struct sccnxp_port *)co->data;
+ struct uart_port *port = &s->port[(co->index > 0) ? co->index : 0];
+ int baud = 9600, bits = 8, parity = 'n', flow = 'n';
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+#endif
+
+static int __devinit sccnxp_probe(struct platform_device *pdev)
+{
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ int chiptype = pdev->id_entry->driver_data;
+ struct sccnxp_pdata *pdata = dev_get_platdata(&pdev->dev);
+ int i, ret, fifosize, freq_min, freq_max;
+ struct sccnxp_port *s;
+ void __iomem *membase;
+
+ if (!res) {
+ dev_err(&pdev->dev, "Missing memory resource data\n");
+ return -EADDRNOTAVAIL;
+ }
+
+ dev_set_name(&pdev->dev, SCCNXP_NAME);
+
+ s = devm_kzalloc(&pdev->dev, sizeof(struct sccnxp_port), GFP_KERNEL);
+ if (!s) {
+ dev_err(&pdev->dev, "Error allocating port structure\n");
+ return -ENOMEM;
+ }
+ platform_set_drvdata(pdev, s);
+
+ mutex_init(&s->sccnxp_mutex);
+
+ /* Individual chip settings */
+ switch (chiptype) {
+ case SCCNXP_TYPE_SC2681:
+ s->name = "SC2681";
+ s->uart.nr = 2;
+ s->freq_std = 3686400;
+ s->addr_mask = 0x0f;
+ s->flags = SCCNXP_HAVE_IO;
+ fifosize = 3;
+ freq_min = 1000000;
+ freq_max = 4000000;
+ break;
+ case SCCNXP_TYPE_SC2691:
+ s->name = "SC2691";
+ s->uart.nr = 1;
+ s->freq_std = 3686400;
+ s->addr_mask = 0x07;
+ s->flags = 0;
+ fifosize = 3;
+ freq_min = 1000000;
+ freq_max = 4000000;
+ break;
+ case SCCNXP_TYPE_SC2692:
+ s->name = "SC2692";
+ s->uart.nr = 2;
+ s->freq_std = 3686400;
+ s->addr_mask = 0x0f;
+ s->flags = SCCNXP_HAVE_IO;
+ fifosize = 3;
+ freq_min = 1000000;
+ freq_max = 4000000;
+ break;
+ case SCCNXP_TYPE_SC2891:
+ s->name = "SC2891";
+ s->uart.nr = 1;
+ s->freq_std = 3686400;
+ s->addr_mask = 0x0f;
+ s->flags = SCCNXP_HAVE_IO | SCCNXP_HAVE_MR0;
+ fifosize = 16;
+ freq_min = 100000;
+ freq_max = 8000000;
+ break;
+ case SCCNXP_TYPE_SC2892:
+ s->name = "SC2892";
+ s->uart.nr = 2;
+ s->freq_std = 3686400;
+ s->addr_mask = 0x0f;
+ s->flags = SCCNXP_HAVE_IO | SCCNXP_HAVE_MR0;
+ fifosize = 16;
+ freq_min = 100000;
+ freq_max = 8000000;
+ break;
+ case SCCNXP_TYPE_SC28202:
+ s->name = "SC28202";
+ s->uart.nr = 2;
+ s->freq_std = 14745600;
+ s->addr_mask = 0x7f;
+ s->flags = SCCNXP_HAVE_IO | SCCNXP_HAVE_MR0;
+ fifosize = 256;
+ freq_min = 1000000;
+ freq_max = 50000000;
+ break;
+ case SCCNXP_TYPE_SC68681:
+ s->name = "SC68681";
+ s->uart.nr = 2;
+ s->freq_std = 3686400;
+ s->addr_mask = 0x0f;
+ s->flags = SCCNXP_HAVE_IO;
+ fifosize = 3;
+ freq_min = 1000000;
+ freq_max = 4000000;
+ break;
+ case SCCNXP_TYPE_SC68692:
+ s->name = "SC68692";
+ s->uart.nr = 2;
+ s->freq_std = 3686400;
+ s->addr_mask = 0x0f;
+ s->flags = SCCNXP_HAVE_IO;
+ fifosize = 3;
+ freq_min = 1000000;
+ freq_max = 4000000;
+ break;
+ default:
+ dev_err(&pdev->dev, "Unsupported chip type %i\n", chiptype);
+ ret = -ENOTSUPP;
+ goto err_out;
+ }
+
+ if (!pdata) {
+ dev_warn(&pdev->dev,
+ "No platform data supplied, using defaults\n");
+ s->pdata.frequency = s->freq_std;
+ } else
+ memcpy(&s->pdata, pdata, sizeof(struct sccnxp_pdata));
+
+ s->irq = platform_get_irq(pdev, 0);
+ if (s->irq <= 0) {
+ dev_err(&pdev->dev, "Missing irq resource data\n");
+ ret = -ENXIO;
+ goto err_out;
+ }
+
+ /* Check input frequency */
+ if ((s->pdata.frequency < freq_min) ||
+ (s->pdata.frequency > freq_max)) {
+ dev_err(&pdev->dev, "Frequency out of bounds\n");
+ ret = -EINVAL;
+ goto err_out;
+ }
+
+ membase = devm_request_and_ioremap(&pdev->dev, res);
+ if (!membase) {
+ dev_err(&pdev->dev, "Failed to ioremap\n");
+ ret = -EIO;
+ goto err_out;
+ }
+
+ s->uart.owner = THIS_MODULE;
+ s->uart.dev_name = "ttySC";
+ s->uart.major = SCCNXP_MAJOR;
+ s->uart.minor = SCCNXP_MINOR;
+#ifdef CONFIG_SERIAL_SCCNXP_CONSOLE
+ s->uart.cons = &s->console;
+ s->uart.cons->device = uart_console_device;
+ s->uart.cons->write = sccnxp_console_write;
+ s->uart.cons->setup = sccnxp_console_setup;
+ s->uart.cons->flags = CON_PRINTBUFFER;
+ s->uart.cons->index = -1;
+ s->uart.cons->data = s;
+ strcpy(s->uart.cons->name, "ttySC");
+#endif
+ ret = uart_register_driver(&s->uart);
+ if (ret) {
+ dev_err(&pdev->dev, "Registering UART driver failed\n");
+ goto err_out;
+ }
+
+ for (i = 0; i < s->uart.nr; i++) {
+ s->port[i].line = i;
+ s->port[i].dev = &pdev->dev;
+ s->port[i].irq = s->irq;
+ s->port[i].type = PORT_SC26XX;
+ s->port[i].fifosize = fifosize;
+ s->port[i].flags = UPF_SKIP_TEST | UPF_FIXED_TYPE;
+ s->port[i].iotype = UPIO_MEM;
+ s->port[i].mapbase = res->start;
+ s->port[i].membase = membase;
+ s->port[i].regshift = s->pdata.reg_shift;
+ s->port[i].uartclk = s->pdata.frequency;
+ s->port[i].ops = &sccnxp_ops;
+ uart_add_one_port(&s->uart, &s->port[i]);
+ /* Set direction to input */
+ if (s->flags & SCCNXP_HAVE_IO)
+ sccnxp_set_bit(&s->port[i], DIR_OP, 0);
+ }
+
+ /* Disable interrupts */
+ s->imr = 0;
+ sccnxp_write(&s->port[0], SCCNXP_IMR_REG, 0);
+
+ /* Board specific configure */
+ if (s->pdata.init)
+ s->pdata.init();
+
+ ret = devm_request_threaded_irq(&pdev->dev, s->irq, NULL, sccnxp_ist,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ dev_name(&pdev->dev), s);
+ if (!ret)
+ return 0;
+
+ dev_err(&pdev->dev, "Unable to reguest IRQ %i\n", s->irq);
+
+err_out:
+ platform_set_drvdata(pdev, NULL);
+
+ return ret;
+}
+
+static int __devexit sccnxp_remove(struct platform_device *pdev)
+{
+ int i;
+ struct sccnxp_port *s = platform_get_drvdata(pdev);
+
+ devm_free_irq(&pdev->dev, s->irq, s);
+
+ for (i = 0; i < s->uart.nr; i++)
+ uart_remove_one_port(&s->uart, &s->port[i]);
+
+ uart_unregister_driver(&s->uart);
+ platform_set_drvdata(pdev, NULL);
+
+ if (s->pdata.exit)
+ s->pdata.exit();
+
+ return 0;
+}
+
+static const struct platform_device_id sccnxp_id_table[] = {
+ { "sc2681", SCCNXP_TYPE_SC2681 },
+ { "sc2691", SCCNXP_TYPE_SC2691 },
+ { "sc2692", SCCNXP_TYPE_SC2692 },
+ { "sc2891", SCCNXP_TYPE_SC2891 },
+ { "sc2892", SCCNXP_TYPE_SC2892 },
+ { "sc28202", SCCNXP_TYPE_SC28202 },
+ { "sc68681", SCCNXP_TYPE_SC68681 },
+ { "sc68692", SCCNXP_TYPE_SC68692 },
+};
+MODULE_DEVICE_TABLE(platform, sccnxp_id_table);
+
+static struct platform_driver sccnxp_uart_driver = {
+ .driver = {
+ .name = SCCNXP_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = sccnxp_probe,
+ .remove = __devexit_p(sccnxp_remove),
+ .id_table = sccnxp_id_table,
+};
+module_platform_driver(sccnxp_uart_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
+MODULE_DESCRIPTION("SCCNXP serial driver");
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index a21dc8e3b7c..046279ce3e8 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -159,7 +159,7 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state,
retval = uport->ops->startup(uport);
if (retval == 0) {
if (uart_console(uport) && uport->cons->cflag) {
- tty->termios->c_cflag = uport->cons->cflag;
+ tty->termios.c_cflag = uport->cons->cflag;
uport->cons->cflag = 0;
}
/*
@@ -172,11 +172,11 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state,
* Setup the RTS and DTR signals once the
* port is open and ready to respond.
*/
- if (tty->termios->c_cflag & CBAUD)
+ if (tty->termios.c_cflag & CBAUD)
uart_set_mctrl(uport, TIOCM_RTS | TIOCM_DTR);
}
- if (port->flags & ASYNC_CTS_FLOW) {
+ if (tty_port_cts_enabled(port)) {
spin_lock_irq(&uport->lock);
if (!(uport->ops->get_mctrl(uport) & TIOCM_CTS))
tty->hw_stopped = 1;
@@ -240,7 +240,7 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state)
/*
* Turn off DTR and RTS early.
*/
- if (!tty || (tty->termios->c_cflag & HUPCL))
+ if (!tty || (tty->termios.c_cflag & HUPCL))
uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
uart_port_shutdown(port);
@@ -440,10 +440,10 @@ static void uart_change_speed(struct tty_struct *tty, struct uart_state *state,
* If we have no tty, termios, or the port does not exist,
* then we can't set the parameters for this port.
*/
- if (!tty || !tty->termios || uport->type == PORT_UNKNOWN)
+ if (!tty || uport->type == PORT_UNKNOWN)
return;
- termios = tty->termios;
+ termios = &tty->termios;
/*
* Set flags based on termios cflag
@@ -614,7 +614,7 @@ static void uart_throttle(struct tty_struct *tty)
if (I_IXOFF(tty))
uart_send_xchar(tty, STOP_CHAR(tty));
- if (tty->termios->c_cflag & CRTSCTS)
+ if (tty->termios.c_cflag & CRTSCTS)
uart_clear_mctrl(state->uart_port, TIOCM_RTS);
}
@@ -630,42 +630,48 @@ static void uart_unthrottle(struct tty_struct *tty)
uart_send_xchar(tty, START_CHAR(tty));
}
- if (tty->termios->c_cflag & CRTSCTS)
+ if (tty->termios.c_cflag & CRTSCTS)
uart_set_mctrl(port, TIOCM_RTS);
}
-static int uart_get_info(struct uart_state *state,
- struct serial_struct __user *retinfo)
+static void uart_get_info(struct tty_port *port,
+ struct uart_state *state,
+ struct serial_struct *retinfo)
{
struct uart_port *uport = state->uart_port;
- struct tty_port *port = &state->port;
- struct serial_struct tmp;
-
- memset(&tmp, 0, sizeof(tmp));
- /* Ensure the state we copy is consistent and no hardware changes
- occur as we go */
- mutex_lock(&port->mutex);
+ memset(retinfo, 0, sizeof(*retinfo));
- tmp.type = uport->type;
- tmp.line = uport->line;
- tmp.port = uport->iobase;
+ retinfo->type = uport->type;
+ retinfo->line = uport->line;
+ retinfo->port = uport->iobase;
if (HIGH_BITS_OFFSET)
- tmp.port_high = (long) uport->iobase >> HIGH_BITS_OFFSET;
- tmp.irq = uport->irq;
- tmp.flags = uport->flags;
- tmp.xmit_fifo_size = uport->fifosize;
- tmp.baud_base = uport->uartclk / 16;
- tmp.close_delay = jiffies_to_msecs(port->close_delay) / 10;
- tmp.closing_wait = port->closing_wait == ASYNC_CLOSING_WAIT_NONE ?
+ retinfo->port_high = (long) uport->iobase >> HIGH_BITS_OFFSET;
+ retinfo->irq = uport->irq;
+ retinfo->flags = uport->flags;
+ retinfo->xmit_fifo_size = uport->fifosize;
+ retinfo->baud_base = uport->uartclk / 16;
+ retinfo->close_delay = jiffies_to_msecs(port->close_delay) / 10;
+ retinfo->closing_wait = port->closing_wait == ASYNC_CLOSING_WAIT_NONE ?
ASYNC_CLOSING_WAIT_NONE :
jiffies_to_msecs(port->closing_wait) / 10;
- tmp.custom_divisor = uport->custom_divisor;
- tmp.hub6 = uport->hub6;
- tmp.io_type = uport->iotype;
- tmp.iomem_reg_shift = uport->regshift;
- tmp.iomem_base = (void *)(unsigned long)uport->mapbase;
+ retinfo->custom_divisor = uport->custom_divisor;
+ retinfo->hub6 = uport->hub6;
+ retinfo->io_type = uport->iotype;
+ retinfo->iomem_reg_shift = uport->regshift;
+ retinfo->iomem_base = (void *)(unsigned long)uport->mapbase;
+}
+static int uart_get_info_user(struct uart_state *state,
+ struct serial_struct __user *retinfo)
+{
+ struct tty_port *port = &state->port;
+ struct serial_struct tmp;
+
+ /* Ensure the state we copy is consistent and no hardware changes
+ occur as we go */
+ mutex_lock(&port->mutex);
+ uart_get_info(port, state, &tmp);
mutex_unlock(&port->mutex);
if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
@@ -673,42 +679,30 @@ static int uart_get_info(struct uart_state *state,
return 0;
}
-static int uart_set_info(struct tty_struct *tty, struct uart_state *state,
- struct serial_struct __user *newinfo)
+static int uart_set_info(struct tty_struct *tty, struct tty_port *port,
+ struct uart_state *state,
+ struct serial_struct *new_info)
{
- struct serial_struct new_serial;
struct uart_port *uport = state->uart_port;
- struct tty_port *port = &state->port;
unsigned long new_port;
unsigned int change_irq, change_port, closing_wait;
unsigned int old_custom_divisor, close_delay;
upf_t old_flags, new_flags;
int retval = 0;
- if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
- return -EFAULT;
-
- new_port = new_serial.port;
+ new_port = new_info->port;
if (HIGH_BITS_OFFSET)
- new_port += (unsigned long) new_serial.port_high << HIGH_BITS_OFFSET;
+ new_port += (unsigned long) new_info->port_high << HIGH_BITS_OFFSET;
- new_serial.irq = irq_canonicalize(new_serial.irq);
- close_delay = msecs_to_jiffies(new_serial.close_delay * 10);
- closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
+ new_info->irq = irq_canonicalize(new_info->irq);
+ close_delay = msecs_to_jiffies(new_info->close_delay * 10);
+ closing_wait = new_info->closing_wait == ASYNC_CLOSING_WAIT_NONE ?
ASYNC_CLOSING_WAIT_NONE :
- msecs_to_jiffies(new_serial.closing_wait * 10);
+ msecs_to_jiffies(new_info->closing_wait * 10);
- /*
- * This semaphore protects port->count. It is also
- * very useful to prevent opens. Also, take the
- * port configuration semaphore to make sure that a
- * module insertion/removal doesn't change anything
- * under us.
- */
- mutex_lock(&port->mutex);
change_irq = !(uport->flags & UPF_FIXED_PORT)
- && new_serial.irq != uport->irq;
+ && new_info->irq != uport->irq;
/*
* Since changing the 'type' of the port changes its resource
@@ -717,29 +711,29 @@ static int uart_set_info(struct tty_struct *tty, struct uart_state *state,
*/
change_port = !(uport->flags & UPF_FIXED_PORT)
&& (new_port != uport->iobase ||
- (unsigned long)new_serial.iomem_base != uport->mapbase ||
- new_serial.hub6 != uport->hub6 ||
- new_serial.io_type != uport->iotype ||
- new_serial.iomem_reg_shift != uport->regshift ||
- new_serial.type != uport->type);
+ (unsigned long)new_info->iomem_base != uport->mapbase ||
+ new_info->hub6 != uport->hub6 ||
+ new_info->io_type != uport->iotype ||
+ new_info->iomem_reg_shift != uport->regshift ||
+ new_info->type != uport->type);
old_flags = uport->flags;
- new_flags = new_serial.flags;
+ new_flags = new_info->flags;
old_custom_divisor = uport->custom_divisor;
if (!capable(CAP_SYS_ADMIN)) {
retval = -EPERM;
if (change_irq || change_port ||
- (new_serial.baud_base != uport->uartclk / 16) ||
+ (new_info->baud_base != uport->uartclk / 16) ||
(close_delay != port->close_delay) ||
(closing_wait != port->closing_wait) ||
- (new_serial.xmit_fifo_size &&
- new_serial.xmit_fifo_size != uport->fifosize) ||
+ (new_info->xmit_fifo_size &&
+ new_info->xmit_fifo_size != uport->fifosize) ||
(((new_flags ^ old_flags) & ~UPF_USR_MASK) != 0))
goto exit;
uport->flags = ((uport->flags & ~UPF_USR_MASK) |
(new_flags & UPF_USR_MASK));
- uport->custom_divisor = new_serial.custom_divisor;
+ uport->custom_divisor = new_info->custom_divisor;
goto check_and_exit;
}
@@ -747,10 +741,10 @@ static int uart_set_info(struct tty_struct *tty, struct uart_state *state,
* Ask the low level driver to verify the settings.
*/
if (uport->ops->verify_port)
- retval = uport->ops->verify_port(uport, &new_serial);
+ retval = uport->ops->verify_port(uport, new_info);
- if ((new_serial.irq >= nr_irqs) || (new_serial.irq < 0) ||
- (new_serial.baud_base < 9600))
+ if ((new_info->irq >= nr_irqs) || (new_info->irq < 0) ||
+ (new_info->baud_base < 9600))
retval = -EINVAL;
if (retval)
@@ -790,11 +784,11 @@ static int uart_set_info(struct tty_struct *tty, struct uart_state *state,
uport->ops->release_port(uport);
uport->iobase = new_port;
- uport->type = new_serial.type;
- uport->hub6 = new_serial.hub6;
- uport->iotype = new_serial.io_type;
- uport->regshift = new_serial.iomem_reg_shift;
- uport->mapbase = (unsigned long)new_serial.iomem_base;
+ uport->type = new_info->type;
+ uport->hub6 = new_info->hub6;
+ uport->iotype = new_info->io_type;
+ uport->regshift = new_info->iomem_reg_shift;
+ uport->mapbase = (unsigned long)new_info->iomem_base;
/*
* Claim and map the new regions
@@ -835,16 +829,16 @@ static int uart_set_info(struct tty_struct *tty, struct uart_state *state,
}
if (change_irq)
- uport->irq = new_serial.irq;
+ uport->irq = new_info->irq;
if (!(uport->flags & UPF_FIXED_PORT))
- uport->uartclk = new_serial.baud_base * 16;
+ uport->uartclk = new_info->baud_base * 16;
uport->flags = (uport->flags & ~UPF_CHANGE_MASK) |
(new_flags & UPF_CHANGE_MASK);
- uport->custom_divisor = new_serial.custom_divisor;
+ uport->custom_divisor = new_info->custom_divisor;
port->close_delay = close_delay;
port->closing_wait = closing_wait;
- if (new_serial.xmit_fifo_size)
- uport->fifosize = new_serial.xmit_fifo_size;
+ if (new_info->xmit_fifo_size)
+ uport->fifosize = new_info->xmit_fifo_size;
if (port->tty)
port->tty->low_latency =
(uport->flags & UPF_LOW_LATENCY) ? 1 : 0;
@@ -873,6 +867,28 @@ static int uart_set_info(struct tty_struct *tty, struct uart_state *state,
} else
retval = uart_startup(tty, state, 1);
exit:
+ return retval;
+}
+
+static int uart_set_info_user(struct tty_struct *tty, struct uart_state *state,
+ struct serial_struct __user *newinfo)
+{
+ struct serial_struct new_serial;
+ struct tty_port *port = &state->port;
+ int retval;
+
+ if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
+ return -EFAULT;
+
+ /*
+ * This semaphore protects port->count. It is also
+ * very useful to prevent opens. Also, take the
+ * port configuration semaphore to make sure that a
+ * module insertion/removal doesn't change anything
+ * under us.
+ */
+ mutex_lock(&port->mutex);
+ retval = uart_set_info(tty, port, state, &new_serial);
mutex_unlock(&port->mutex);
return retval;
}
@@ -1115,11 +1131,11 @@ uart_ioctl(struct tty_struct *tty, unsigned int cmd,
*/
switch (cmd) {
case TIOCGSERIAL:
- ret = uart_get_info(state, uarg);
+ ret = uart_get_info_user(state, uarg);
break;
case TIOCSSERIAL:
- ret = uart_set_info(tty, state, uarg);
+ ret = uart_set_info_user(tty, state, uarg);
break;
case TIOCSERCONFIG:
@@ -1187,7 +1203,7 @@ static void uart_set_ldisc(struct tty_struct *tty)
struct uart_port *uport = state->uart_port;
if (uport->ops->set_ldisc)
- uport->ops->set_ldisc(uport, tty->termios->c_line);
+ uport->ops->set_ldisc(uport, tty->termios.c_line);
}
static void uart_set_termios(struct tty_struct *tty,
@@ -1195,7 +1211,7 @@ static void uart_set_termios(struct tty_struct *tty,
{
struct uart_state *state = tty->driver_data;
unsigned long flags;
- unsigned int cflag = tty->termios->c_cflag;
+ unsigned int cflag = tty->termios.c_cflag;
/*
@@ -1206,9 +1222,9 @@ static void uart_set_termios(struct tty_struct *tty,
*/
#define RELEVANT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
if ((cflag ^ old_termios->c_cflag) == 0 &&
- tty->termios->c_ospeed == old_termios->c_ospeed &&
- tty->termios->c_ispeed == old_termios->c_ispeed &&
- RELEVANT_IFLAG(tty->termios->c_iflag ^ old_termios->c_iflag) == 0) {
+ tty->termios.c_ospeed == old_termios->c_ospeed &&
+ tty->termios.c_ispeed == old_termios->c_ispeed &&
+ RELEVANT_IFLAG(tty->termios.c_iflag ^ old_termios->c_iflag) == 0) {
return;
}
@@ -1960,8 +1976,8 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
/*
* If that's unset, use the tty termios setting.
*/
- if (port->tty && port->tty->termios && termios.c_cflag == 0)
- termios = *(port->tty->termios);
+ if (port->tty && termios.c_cflag == 0)
+ termios = port->tty->termios;
if (console_suspend_enabled)
uart_change_pm(state, 0);
@@ -2293,6 +2309,36 @@ struct tty_driver *uart_console_device(struct console *co, int *index)
return p->tty_driver;
}
+static ssize_t uart_get_attr_uartclk(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int ret;
+ struct tty_port *port = dev_get_drvdata(dev);
+ struct uart_state *state = container_of(port, struct uart_state, port);
+
+ mutex_lock(&state->port.mutex);
+ ret = snprintf(buf, PAGE_SIZE, "%d\n", state->uart_port->uartclk);
+ mutex_unlock(&state->port.mutex);
+
+ return ret;
+}
+
+static DEVICE_ATTR(uartclk, S_IRUSR | S_IRGRP, uart_get_attr_uartclk, NULL);
+
+static struct attribute *tty_dev_attrs[] = {
+ &dev_attr_uartclk.attr,
+ NULL,
+ };
+
+static const struct attribute_group tty_dev_attr_group = {
+ .attrs = tty_dev_attrs,
+ };
+
+static const struct attribute_group *tty_dev_attr_groups[] = {
+ &tty_dev_attr_group,
+ NULL
+ };
+
/**
* uart_add_one_port - attach a driver-defined port structure
* @drv: pointer to the uart low level driver structure for this port
@@ -2346,7 +2392,8 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)
* Register the port whether it's detected or not. This allows
* setserial to be used to alter this ports parameters.
*/
- tty_dev = tty_register_device(drv->tty_driver, uport->line, uport->dev);
+ tty_dev = tty_port_register_device_attr(port, drv->tty_driver,
+ uport->line, uport->dev, port, tty_dev_attr_groups);
if (likely(!IS_ERR(tty_dev))) {
device_set_wakeup_capable(tty_dev, 1);
} else {
@@ -2492,7 +2539,7 @@ void uart_handle_cts_change(struct uart_port *uport, unsigned int status)
uport->icount.cts++;
- if (port->flags & ASYNC_CTS_FLOW) {
+ if (tty_port_cts_enabled(port)) {
if (tty->hw_stopped) {
if (status) {
tty->hw_stopped = 0;
diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c
index 5b3eda2024f..a9e2bd1ab53 100644
--- a/drivers/tty/serial/sirfsoc_uart.c
+++ b/drivers/tty/serial/sirfsoc_uart.c
@@ -668,7 +668,7 @@ int sirfsoc_uart_probe(struct platform_device *pdev)
if (res == NULL) {
dev_err(&pdev->dev, "Insufficient resources.\n");
ret = -EFAULT;
- goto irq_err;
+ goto err;
}
port->irq = res->start;
@@ -676,7 +676,7 @@ int sirfsoc_uart_probe(struct platform_device *pdev)
sirfport->p = pinctrl_get_select_default(&pdev->dev);
ret = IS_ERR(sirfport->p);
if (ret)
- goto pin_err;
+ goto err;
}
port->ops = &sirfsoc_uart_ops;
@@ -695,9 +695,6 @@ port_err:
platform_set_drvdata(pdev, NULL);
if (sirfport->hw_flow_ctrl)
pinctrl_put(sirfport->p);
-pin_err:
-irq_err:
- devm_iounmap(&pdev->dev, port->membase);
err:
return ret;
}
@@ -709,7 +706,6 @@ static int sirfsoc_uart_remove(struct platform_device *pdev)
platform_set_drvdata(pdev, NULL);
if (sirfport->hw_flow_ctrl)
pinctrl_put(sirfport->p);
- devm_iounmap(&pdev->dev, port->membase);
uart_remove_one_port(&sirfsoc_uart_drv, port);
return 0;
}
diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c
index 675303b8ed8..b97913dcdbf 100644
--- a/drivers/tty/serial/sunsu.c
+++ b/drivers/tty/serial/sunsu.c
@@ -58,10 +58,16 @@
enum su_type { SU_PORT_NONE, SU_PORT_MS, SU_PORT_KBD, SU_PORT_PORT };
static char *su_typev[] = { "su(???)", "su(mouse)", "su(kbd)", "su(serial)" };
+struct serial_uart_config {
+ char *name;
+ int dfl_xmit_fifo_size;
+ int flags;
+};
+
/*
* Here we define the default xmit fifo size used for each type of UART.
*/
-static const struct serial_uart_config uart_config[PORT_MAX_8250+1] = {
+static const struct serial_uart_config uart_config[] = {
{ "unknown", 1, 0 },
{ "8250", 1, 0 },
{ "16450", 1, 0 },
diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
index 593d40ad0a6..70e3a525bc8 100644
--- a/drivers/tty/synclink.c
+++ b/drivers/tty/synclink.c
@@ -1359,7 +1359,7 @@ static void mgsl_isr_io_pin( struct mgsl_struct *info )
}
}
- if ( (info->port.flags & ASYNC_CTS_FLOW) &&
+ if (tty_port_cts_enabled(&info->port) &&
(status & MISCSTATUS_CTS_LATCHED) ) {
if (info->port.tty->hw_stopped) {
if (status & MISCSTATUS_CTS) {
@@ -1840,22 +1840,22 @@ static void shutdown(struct mgsl_struct * info)
usc_DisableInterrupts(info,RECEIVE_DATA + RECEIVE_STATUS +
TRANSMIT_DATA + TRANSMIT_STATUS + IO_PIN + MISC );
usc_DisableDmaInterrupts(info,DICR_MASTER + DICR_TRANSMIT + DICR_RECEIVE);
-
+
/* Disable DMAEN (Port 7, Bit 14) */
/* This disconnects the DMA request signal from the ISA bus */
/* on the ISA adapter. This has no effect for the PCI adapter */
usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) | BIT14));
-
+
/* Disable INTEN (Port 6, Bit12) */
/* This disconnects the IRQ request signal to the ISA bus */
/* on the ISA adapter. This has no effect for the PCI adapter */
usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) | BIT12));
-
- if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
+
+ if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) {
info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
usc_set_serial_signals(info);
}
-
+
spin_unlock_irqrestore(&info->irq_spinlock,flags);
mgsl_release_resources(info);
@@ -1895,7 +1895,7 @@ static void mgsl_program_hw(struct mgsl_struct *info)
usc_EnableInterrupts(info, IO_PIN);
usc_get_serial_signals(info);
- if (info->netcount || info->port.tty->termios->c_cflag & CREAD)
+ if (info->netcount || info->port.tty->termios.c_cflag & CREAD)
usc_start_receiver(info);
spin_unlock_irqrestore(&info->irq_spinlock,flags);
@@ -1908,14 +1908,14 @@ static void mgsl_change_params(struct mgsl_struct *info)
unsigned cflag;
int bits_per_char;
- if (!info->port.tty || !info->port.tty->termios)
+ if (!info->port.tty)
return;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_change_params(%s)\n",
__FILE__,__LINE__, info->device_name );
- cflag = info->port.tty->termios->c_cflag;
+ cflag = info->port.tty->termios.c_cflag;
/* if B0 rate (hangup) specified then negate DTR and RTS */
/* otherwise assert DTR and RTS */
@@ -2367,8 +2367,8 @@ static void mgsl_throttle(struct tty_struct * tty)
if (I_IXOFF(tty))
mgsl_send_xchar(tty, STOP_CHAR(tty));
-
- if (tty->termios->c_cflag & CRTSCTS) {
+
+ if (tty->termios.c_cflag & CRTSCTS) {
spin_lock_irqsave(&info->irq_spinlock,flags);
info->serial_signals &= ~SerialSignal_RTS;
usc_set_serial_signals(info);
@@ -2401,8 +2401,8 @@ static void mgsl_unthrottle(struct tty_struct * tty)
else
mgsl_send_xchar(tty, START_CHAR(tty));
}
-
- if (tty->termios->c_cflag & CRTSCTS) {
+
+ if (tty->termios.c_cflag & CRTSCTS) {
spin_lock_irqsave(&info->irq_spinlock,flags);
info->serial_signals |= SerialSignal_RTS;
usc_set_serial_signals(info);
@@ -3045,7 +3045,7 @@ static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termio
/* Handle transition to B0 status */
if (old_termios->c_cflag & CBAUD &&
- !(tty->termios->c_cflag & CBAUD)) {
+ !(tty->termios.c_cflag & CBAUD)) {
info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
spin_lock_irqsave(&info->irq_spinlock,flags);
usc_set_serial_signals(info);
@@ -3054,9 +3054,9 @@ static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termio
/* Handle transition away from B0 status */
if (!(old_termios->c_cflag & CBAUD) &&
- tty->termios->c_cflag & CBAUD) {
+ tty->termios.c_cflag & CBAUD) {
info->serial_signals |= SerialSignal_DTR;
- if (!(tty->termios->c_cflag & CRTSCTS) ||
+ if (!(tty->termios.c_cflag & CRTSCTS) ||
!test_bit(TTY_THROTTLED, &tty->flags)) {
info->serial_signals |= SerialSignal_RTS;
}
@@ -3067,7 +3067,7 @@ static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termio
/* Handle turning off CRTSCTS */
if (old_termios->c_cflag & CRTSCTS &&
- !(tty->termios->c_cflag & CRTSCTS)) {
+ !(tty->termios.c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
mgsl_start(tty);
}
@@ -3287,7 +3287,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
return 0;
}
- if (tty->termios->c_cflag & CLOCAL)
+ if (tty->termios.c_cflag & CLOCAL)
do_clocal = true;
/* Wait for carrier detect and the line to become
@@ -3313,7 +3313,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
port->blocked_open++;
while (1) {
- if (tty->termios->c_cflag & CBAUD)
+ if (tty->termios.c_cflag & CBAUD)
tty_port_raise_dtr_rts(port);
set_current_state(TASK_INTERRUPTIBLE);
@@ -3338,9 +3338,9 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
printk("%s(%d):block_til_ready blocking on %s count=%d\n",
__FILE__,__LINE__, tty->driver->name, port->count );
- tty_unlock();
+ tty_unlock(tty);
schedule();
- tty_lock();
+ tty_lock(tty);
}
set_current_state(TASK_RUNNING);
@@ -3362,6 +3362,29 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
} /* end of block_til_ready() */
+static int mgsl_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+ struct mgsl_struct *info;
+ int line = tty->index;
+
+ /* verify range of specified line number */
+ if (line >= mgsl_device_count) {
+ printk("%s(%d):mgsl_open with invalid line #%d.\n",
+ __FILE__, __LINE__, line);
+ return -ENODEV;
+ }
+
+ /* find the info structure for the specified line */
+ info = mgsl_device_list;
+ while (info && info->line != line)
+ info = info->next_device;
+ if (mgsl_paranoia_check(info, tty->name, "mgsl_open"))
+ return -ENODEV;
+ tty->driver_data = info;
+
+ return tty_port_install(&info->port, driver, tty);
+}
+
/* mgsl_open()
*
* Called when a port is opened. Init and enable port.
@@ -3374,26 +3397,10 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
*/
static int mgsl_open(struct tty_struct *tty, struct file * filp)
{
- struct mgsl_struct *info;
- int retval, line;
+ struct mgsl_struct *info = tty->driver_data;
unsigned long flags;
+ int retval;
- /* verify range of specified line number */
- line = tty->index;
- if (line >= mgsl_device_count) {
- printk("%s(%d):mgsl_open with invalid line #%d.\n",
- __FILE__,__LINE__,line);
- return -ENODEV;
- }
-
- /* find the info structure for the specified line */
- info = mgsl_device_list;
- while(info && info->line != line)
- info = info->next_device;
- if (mgsl_paranoia_check(info, tty->name, "mgsl_open"))
- return -ENODEV;
-
- tty->driver_data = info;
info->port.tty = tty;
if (debug_level >= DEBUG_LEVEL_INFO)
@@ -4297,6 +4304,7 @@ static struct mgsl_struct* mgsl_allocate_device(void)
} /* end of mgsl_allocate_device()*/
static const struct tty_operations mgsl_ops = {
+ .install = mgsl_install,
.open = mgsl_open,
.close = mgsl_close,
.write = mgsl_write,
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index aa1debf97cc..b38e954eedd 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -785,7 +785,7 @@ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
/* Handle transition to B0 status */
if (old_termios->c_cflag & CBAUD &&
- !(tty->termios->c_cflag & CBAUD)) {
+ !(tty->termios.c_cflag & CBAUD)) {
info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
spin_lock_irqsave(&info->lock,flags);
set_signals(info);
@@ -794,9 +794,9 @@ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
/* Handle transition away from B0 status */
if (!(old_termios->c_cflag & CBAUD) &&
- tty->termios->c_cflag & CBAUD) {
+ tty->termios.c_cflag & CBAUD) {
info->signals |= SerialSignal_DTR;
- if (!(tty->termios->c_cflag & CRTSCTS) ||
+ if (!(tty->termios.c_cflag & CRTSCTS) ||
!test_bit(TTY_THROTTLED, &tty->flags)) {
info->signals |= SerialSignal_RTS;
}
@@ -807,7 +807,7 @@ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
/* Handle turning off CRTSCTS */
if (old_termios->c_cflag & CRTSCTS &&
- !(tty->termios->c_cflag & CRTSCTS)) {
+ !(tty->termios.c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
tx_release(tty);
}
@@ -1372,7 +1372,7 @@ static void throttle(struct tty_struct * tty)
DBGINFO(("%s throttle\n", info->device_name));
if (I_IXOFF(tty))
send_xchar(tty, STOP_CHAR(tty));
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
spin_lock_irqsave(&info->lock,flags);
info->signals &= ~SerialSignal_RTS;
set_signals(info);
@@ -1397,7 +1397,7 @@ static void unthrottle(struct tty_struct * tty)
else
send_xchar(tty, START_CHAR(tty));
}
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
spin_lock_irqsave(&info->lock,flags);
info->signals |= SerialSignal_RTS;
set_signals(info);
@@ -2053,7 +2053,7 @@ static void cts_change(struct slgt_info *info, unsigned short status)
wake_up_interruptible(&info->event_wait_q);
info->pending_bh |= BH_STATUS;
- if (info->port.flags & ASYNC_CTS_FLOW) {
+ if (tty_port_cts_enabled(&info->port)) {
if (info->port.tty) {
if (info->port.tty->hw_stopped) {
if (info->signals & SerialSignal_CTS) {
@@ -2493,7 +2493,7 @@ static void shutdown(struct slgt_info *info)
slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
- if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
+ if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) {
info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
set_signals(info);
}
@@ -2534,7 +2534,7 @@ static void program_hw(struct slgt_info *info)
get_signals(info);
if (info->netcount ||
- (info->port.tty && info->port.tty->termios->c_cflag & CREAD))
+ (info->port.tty && info->port.tty->termios.c_cflag & CREAD))
rx_start(info);
spin_unlock_irqrestore(&info->lock,flags);
@@ -2548,11 +2548,11 @@ static void change_params(struct slgt_info *info)
unsigned cflag;
int bits_per_char;
- if (!info->port.tty || !info->port.tty->termios)
+ if (!info->port.tty)
return;
DBGINFO(("%s change_params\n", info->device_name));
- cflag = info->port.tty->termios->c_cflag;
+ cflag = info->port.tty->termios.c_cflag;
/* if B0 rate (hangup) specified then negate DTR and RTS */
/* otherwise assert DTR and RTS */
@@ -3292,7 +3292,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
return 0;
}
- if (tty->termios->c_cflag & CLOCAL)
+ if (tty->termios.c_cflag & CLOCAL)
do_clocal = true;
/* Wait for carrier detect and the line to become
@@ -3314,7 +3314,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
port->blocked_open++;
while (1) {
- if ((tty->termios->c_cflag & CBAUD))
+ if ((tty->termios.c_cflag & CBAUD))
tty_port_raise_dtr_rts(port);
set_current_state(TASK_INTERRUPTIBLE);
@@ -3336,9 +3336,9 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
}
DBGINFO(("%s block_til_ready wait\n", tty->driver->name));
- tty_unlock();
+ tty_unlock(tty);
schedule();
- tty_lock();
+ tty_lock(tty);
}
set_current_state(TASK_RUNNING);
@@ -3689,8 +3689,11 @@ static void device_init(int adapter_num, struct pci_dev *pdev)
}
}
- for (i=0; i < port_count; ++i)
- tty_register_device(serial_driver, port_array[i]->line, &(port_array[i]->pdev->dev));
+ for (i = 0; i < port_count; ++i) {
+ struct slgt_info *info = port_array[i];
+ tty_port_register_device(&info->port, serial_driver, info->line,
+ &info->pdev->dev);
+ }
}
static int __devinit init_one(struct pci_dev *dev,
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
index a3dddc12d2f..f17d9f3d84a 100644
--- a/drivers/tty/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -711,15 +711,11 @@ static void ldisc_receive_buf(struct tty_struct *tty,
/* tty callbacks */
-/* Called when a port is opened. Init and enable port.
- */
-static int open(struct tty_struct *tty, struct file *filp)
+static int install(struct tty_driver *driver, struct tty_struct *tty)
{
SLMP_INFO *info;
- int retval, line;
- unsigned long flags;
+ int line = tty->index;
- line = tty->index;
if (line >= synclinkmp_device_count) {
printk("%s(%d): open with invalid line #%d.\n",
__FILE__,__LINE__,line);
@@ -727,17 +723,30 @@ static int open(struct tty_struct *tty, struct file *filp)
}
info = synclinkmp_device_list;
- while(info && info->line != line)
+ while (info && info->line != line)
info = info->next_device;
if (sanity_check(info, tty->name, "open"))
return -ENODEV;
- if ( info->init_error ) {
+ if (info->init_error) {
printk("%s(%d):%s device is not allocated, init error=%d\n",
- __FILE__,__LINE__,info->device_name,info->init_error);
+ __FILE__, __LINE__, info->device_name,
+ info->init_error);
return -ENODEV;
}
tty->driver_data = info;
+
+ return tty_port_install(&info->port, driver, tty);
+}
+
+/* Called when a port is opened. Init and enable port.
+ */
+static int open(struct tty_struct *tty, struct file *filp)
+{
+ SLMP_INFO *info = tty->driver_data;
+ unsigned long flags;
+ int retval;
+
info->port.tty = tty;
if (debug_level >= DEBUG_LEVEL_INFO)
@@ -873,7 +882,7 @@ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
/* Handle transition to B0 status */
if (old_termios->c_cflag & CBAUD &&
- !(tty->termios->c_cflag & CBAUD)) {
+ !(tty->termios.c_cflag & CBAUD)) {
info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
spin_lock_irqsave(&info->lock,flags);
set_signals(info);
@@ -882,9 +891,9 @@ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
/* Handle transition away from B0 status */
if (!(old_termios->c_cflag & CBAUD) &&
- tty->termios->c_cflag & CBAUD) {
+ tty->termios.c_cflag & CBAUD) {
info->serial_signals |= SerialSignal_DTR;
- if (!(tty->termios->c_cflag & CRTSCTS) ||
+ if (!(tty->termios.c_cflag & CRTSCTS) ||
!test_bit(TTY_THROTTLED, &tty->flags)) {
info->serial_signals |= SerialSignal_RTS;
}
@@ -895,7 +904,7 @@ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
/* Handle turning off CRTSCTS */
if (old_termios->c_cflag & CRTSCTS &&
- !(tty->termios->c_cflag & CRTSCTS)) {
+ !(tty->termios.c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
tx_release(tty);
}
@@ -1473,7 +1482,7 @@ static void throttle(struct tty_struct * tty)
if (I_IXOFF(tty))
send_xchar(tty, STOP_CHAR(tty));
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
spin_lock_irqsave(&info->lock,flags);
info->serial_signals &= ~SerialSignal_RTS;
set_signals(info);
@@ -1502,7 +1511,7 @@ static void unthrottle(struct tty_struct * tty)
send_xchar(tty, START_CHAR(tty));
}
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
spin_lock_irqsave(&info->lock,flags);
info->serial_signals |= SerialSignal_RTS;
set_signals(info);
@@ -2491,7 +2500,7 @@ static void isr_io_pin( SLMP_INFO *info, u16 status )
}
}
- if ( (info->port.flags & ASYNC_CTS_FLOW) &&
+ if (tty_port_cts_enabled(&info->port) &&
(status & MISCSTATUS_CTS_LATCHED) ) {
if ( info->port.tty ) {
if (info->port.tty->hw_stopped) {
@@ -2708,7 +2717,7 @@ static void shutdown(SLMP_INFO * info)
reset_port(info);
- if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
+ if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) {
info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
set_signals(info);
}
@@ -2749,7 +2758,7 @@ static void program_hw(SLMP_INFO *info)
get_signals(info);
- if (info->netcount || (info->port.tty && info->port.tty->termios->c_cflag & CREAD) )
+ if (info->netcount || (info->port.tty && info->port.tty->termios.c_cflag & CREAD) )
rx_start(info);
spin_unlock_irqrestore(&info->lock,flags);
@@ -2762,14 +2771,14 @@ static void change_params(SLMP_INFO *info)
unsigned cflag;
int bits_per_char;
- if (!info->port.tty || !info->port.tty->termios)
+ if (!info->port.tty)
return;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):%s change_params()\n",
__FILE__,__LINE__, info->device_name );
- cflag = info->port.tty->termios->c_cflag;
+ cflag = info->port.tty->termios.c_cflag;
/* if B0 rate (hangup) specified then negate DTR and RTS */
/* otherwise assert DTR and RTS */
@@ -3306,7 +3315,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
return 0;
}
- if (tty->termios->c_cflag & CLOCAL)
+ if (tty->termios.c_cflag & CLOCAL)
do_clocal = true;
/* Wait for carrier detect and the line to become
@@ -3332,7 +3341,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
port->blocked_open++;
while (1) {
- if (tty->termios->c_cflag & CBAUD)
+ if (tty->termios.c_cflag & CBAUD)
tty_port_raise_dtr_rts(port);
set_current_state(TASK_INTERRUPTIBLE);
@@ -3357,9 +3366,9 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
printk("%s(%d):%s block_til_ready() count=%d\n",
__FILE__,__LINE__, tty->driver->name, port->count );
- tty_unlock();
+ tty_unlock(tty);
schedule();
- tty_lock();
+ tty_lock(tty);
}
set_current_state(TASK_RUNNING);
@@ -3881,6 +3890,7 @@ static void device_init(int adapter_num, struct pci_dev *pdev)
}
static const struct tty_operations ops = {
+ .install = install,
.open = open,
.close = close,
.write = write,
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index b425c79675a..8a5a8b06461 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -181,10 +181,13 @@ struct tty_struct *alloc_tty_struct(void)
void free_tty_struct(struct tty_struct *tty)
{
+ if (!tty)
+ return;
if (tty->dev)
put_device(tty->dev);
kfree(tty->write_buf);
tty_buffer_free_all(tty);
+ tty->magic = 0xDEADDEAD;
kfree(tty);
}
@@ -573,7 +576,7 @@ void __tty_hangup(struct tty_struct *tty)
}
spin_unlock(&redirect_lock);
- tty_lock();
+ tty_lock(tty);
/* some functions below drop BTM, so we need this bit */
set_bit(TTY_HUPPING, &tty->flags);
@@ -666,7 +669,7 @@ void __tty_hangup(struct tty_struct *tty)
clear_bit(TTY_HUPPING, &tty->flags);
tty_ldisc_enable(tty);
- tty_unlock();
+ tty_unlock(tty);
if (f)
fput(f);
@@ -1103,12 +1106,12 @@ void tty_write_message(struct tty_struct *tty, char *msg)
{
if (tty) {
mutex_lock(&tty->atomic_write_lock);
- tty_lock();
+ tty_lock(tty);
if (tty->ops->write && !test_bit(TTY_CLOSING, &tty->flags)) {
- tty_unlock();
+ tty_unlock(tty);
tty->ops->write(tty, msg, strlen(msg));
} else
- tty_unlock();
+ tty_unlock(tty);
tty_write_unlock(tty);
}
return;
@@ -1213,7 +1216,10 @@ static void pty_line_name(struct tty_driver *driver, int index, char *p)
*/
static void tty_line_name(struct tty_driver *driver, int index, char *p)
{
- sprintf(p, "%s%d", driver->name, index + driver->name_base);
+ if (driver->flags & TTY_DRIVER_UNNUMBERED_NODE)
+ strcpy(p, driver->name);
+ else
+ sprintf(p, "%s%d", driver->name, index + driver->name_base);
}
/**
@@ -1249,21 +1255,19 @@ int tty_init_termios(struct tty_struct *tty)
struct ktermios *tp;
int idx = tty->index;
- tp = tty->driver->termios[idx];
- if (tp == NULL) {
- tp = kzalloc(sizeof(struct ktermios[2]), GFP_KERNEL);
- if (tp == NULL)
- return -ENOMEM;
- memcpy(tp, &tty->driver->init_termios,
- sizeof(struct ktermios));
- tty->driver->termios[idx] = tp;
+ if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS)
+ tty->termios = tty->driver->init_termios;
+ else {
+ /* Check for lazy saved data */
+ tp = tty->driver->termios[idx];
+ if (tp != NULL)
+ tty->termios = *tp;
+ else
+ tty->termios = tty->driver->init_termios;
}
- tty->termios = tp;
- tty->termios_locked = tp + 1;
-
/* Compatibility until drivers always set this */
- tty->termios->c_ispeed = tty_termios_input_baud_rate(tty->termios);
- tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios);
+ tty->termios.c_ispeed = tty_termios_input_baud_rate(&tty->termios);
+ tty->termios.c_ospeed = tty_termios_baud_rate(&tty->termios);
return 0;
}
EXPORT_SYMBOL_GPL(tty_init_termios);
@@ -1403,10 +1407,18 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx)
}
initialize_tty_struct(tty, driver, idx);
+ tty_lock(tty);
retval = tty_driver_install_tty(driver, tty);
if (retval < 0)
goto err_deinit_tty;
+ if (!tty->port)
+ tty->port = driver->ports[idx];
+
+ WARN_RATELIMIT(!tty->port,
+ "%s: %s driver does not set tty->port. This will crash the kernel later. Fix the driver!\n",
+ __func__, tty->driver->name);
+
/*
* Structures all installed ... call the ldisc open routines.
* If we fail here just call release_tty to clean up. No need
@@ -1415,9 +1427,11 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx)
retval = tty_ldisc_setup(tty, tty->link);
if (retval)
goto err_release_tty;
+ /* Return the tty locked so that it cannot vanish under the caller */
return tty;
err_deinit_tty:
+ tty_unlock(tty);
deinitialize_tty_struct(tty);
free_tty_struct(tty);
err_module_put:
@@ -1426,6 +1440,7 @@ err_module_put:
/* call the tty release_tty routine to clean out this slot */
err_release_tty:
+ tty_unlock(tty);
printk_ratelimited(KERN_INFO "tty_init_dev: ldisc open failed, "
"clearing slot %d\n", idx);
release_tty(tty, idx);
@@ -1436,22 +1451,25 @@ void tty_free_termios(struct tty_struct *tty)
{
struct ktermios *tp;
int idx = tty->index;
- /* Kill this flag and push into drivers for locking etc */
- if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) {
- /* FIXME: Locking on ->termios array */
- tp = tty->termios;
- tty->driver->termios[idx] = NULL;
- kfree(tp);
+
+ /* If the port is going to reset then it has no termios to save */
+ if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS)
+ return;
+
+ /* Stash the termios data */
+ tp = tty->driver->termios[idx];
+ if (tp == NULL) {
+ tp = kmalloc(sizeof(struct ktermios), GFP_KERNEL);
+ if (tp == NULL) {
+ pr_warn("tty: no memory to save termios state.\n");
+ return;
+ }
+ tty->driver->termios[idx] = tp;
}
+ *tp = tty->termios;
}
EXPORT_SYMBOL(tty_free_termios);
-void tty_shutdown(struct tty_struct *tty)
-{
- tty_driver_remove_tty(tty->driver, tty);
- tty_free_termios(tty);
-}
-EXPORT_SYMBOL(tty_shutdown);
/**
* release_one_tty - release tty structure memory
@@ -1462,7 +1480,6 @@ EXPORT_SYMBOL(tty_shutdown);
* in use. It also gets called when setup of a device fails.
*
* Locking:
- * tty_mutex - sometimes only
* takes the file list lock internally when working on the list
* of ttys that the driver keeps.
*
@@ -1495,11 +1512,6 @@ static void queue_release_one_tty(struct kref *kref)
{
struct tty_struct *tty = container_of(kref, struct tty_struct, kref);
- if (tty->ops->shutdown)
- tty->ops->shutdown(tty);
- else
- tty_shutdown(tty);
-
/* The hangup queue is now free so we can reuse it rather than
waste a chunk of memory for each port */
INIT_WORK(&tty->hangup_work, release_one_tty);
@@ -1528,16 +1540,20 @@ EXPORT_SYMBOL(tty_kref_put);
* and decrement the refcount of the backing module.
*
* Locking:
- * tty_mutex - sometimes only
+ * tty_mutex
* takes the file list lock internally when working on the list
* of ttys that the driver keeps.
- * FIXME: should we require tty_mutex is held here ??
*
*/
static void release_tty(struct tty_struct *tty, int idx)
{
/* This should always be true but check for the moment */
WARN_ON(tty->index != idx);
+ WARN_ON(!mutex_is_locked(&tty_mutex));
+ if (tty->ops->shutdown)
+ tty->ops->shutdown(tty);
+ tty_free_termios(tty);
+ tty_driver_remove_tty(tty->driver, tty);
if (tty->link)
tty_kref_put(tty->link);
@@ -1572,22 +1588,12 @@ static int tty_release_checks(struct tty_struct *tty, struct tty_struct *o_tty,
__func__, idx, tty->name);
return -1;
}
- if (tty->termios != tty->driver->termios[idx]) {
- printk(KERN_DEBUG "%s: driver.termios[%d] not termios for (%s)\n",
- __func__, idx, tty->name);
- return -1;
- }
if (tty->driver->other) {
if (o_tty != tty->driver->other->ttys[idx]) {
printk(KERN_DEBUG "%s: other->table[%d] not o_tty for (%s)\n",
__func__, idx, tty->name);
return -1;
}
- if (o_tty->termios != tty->driver->other->termios[idx]) {
- printk(KERN_DEBUG "%s: other->termios[%d] not o_termios for (%s)\n",
- __func__, idx, tty->name);
- return -1;
- }
if (o_tty->link != tty) {
printk(KERN_DEBUG "%s: bad pty pointers\n", __func__);
return -1;
@@ -1628,7 +1634,7 @@ int tty_release(struct inode *inode, struct file *filp)
if (tty_paranoia_check(tty, inode, __func__))
return 0;
- tty_lock();
+ tty_lock(tty);
check_tty_count(tty, __func__);
__tty_fasync(-1, filp, 0);
@@ -1637,10 +1643,11 @@ int tty_release(struct inode *inode, struct file *filp)
pty_master = (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
tty->driver->subtype == PTY_TYPE_MASTER);
devpts = (tty->driver->flags & TTY_DRIVER_DEVPTS_MEM) != 0;
+ /* Review: parallel close */
o_tty = tty->link;
if (tty_release_checks(tty, o_tty, idx)) {
- tty_unlock();
+ tty_unlock(tty);
return 0;
}
@@ -1652,7 +1659,7 @@ int tty_release(struct inode *inode, struct file *filp)
if (tty->ops->close)
tty->ops->close(tty, filp);
- tty_unlock();
+ tty_unlock(tty);
/*
* Sanity check: if tty->count is going to zero, there shouldn't be
* any waiters on tty->read_wait or tty->write_wait. We test the
@@ -1675,7 +1682,7 @@ int tty_release(struct inode *inode, struct file *filp)
opens on /dev/tty */
mutex_lock(&tty_mutex);
- tty_lock();
+ tty_lock_pair(tty, o_tty);
tty_closing = tty->count <= 1;
o_tty_closing = o_tty &&
(o_tty->count <= (pty_master ? 1 : 0));
@@ -1706,7 +1713,7 @@ int tty_release(struct inode *inode, struct file *filp)
printk(KERN_WARNING "%s: %s: read/write wait queue active!\n",
__func__, tty_name(tty, buf));
- tty_unlock();
+ tty_unlock_pair(tty, o_tty);
mutex_unlock(&tty_mutex);
schedule();
}
@@ -1715,6 +1722,9 @@ int tty_release(struct inode *inode, struct file *filp)
* The closing flags are now consistent with the open counts on
* both sides, and we've completed the last operation that could
* block, so it's safe to proceed with closing.
+ *
+ * We must *not* drop the tty_mutex until we ensure that a further
+ * entry into tty_open can not pick up this tty.
*/
if (pty_master) {
if (--o_tty->count < 0) {
@@ -1766,12 +1776,13 @@ int tty_release(struct inode *inode, struct file *filp)
}
mutex_unlock(&tty_mutex);
+ tty_unlock_pair(tty, o_tty);
+ /* At this point the TTY_CLOSING flag should ensure a dead tty
+ cannot be re-opened by a racing opener */
/* check whether both sides are closing ... */
- if (!tty_closing || (o_tty && !o_tty_closing)) {
- tty_unlock();
+ if (!tty_closing || (o_tty && !o_tty_closing))
return 0;
- }
#ifdef TTY_DEBUG_HANGUP
printk(KERN_DEBUG "%s: freeing tty structure...\n", __func__);
@@ -1782,14 +1793,17 @@ int tty_release(struct inode *inode, struct file *filp)
tty_ldisc_release(tty, o_tty);
/*
* The release_tty function takes care of the details of clearing
- * the slots and preserving the termios structure.
+ * the slots and preserving the termios structure. The tty_unlock_pair
+ * should be safe as we keep a kref while the tty is locked (so the
+ * unlock never unlocks a freed tty).
*/
+ mutex_lock(&tty_mutex);
release_tty(tty, idx);
+ mutex_unlock(&tty_mutex);
/* Make this pty number available for reallocation */
if (devpts)
devpts_kill_index(inode, idx);
- tty_unlock();
return 0;
}
@@ -1893,6 +1907,9 @@ static struct tty_driver *tty_lookup_driver(dev_t device, struct file *filp,
* Locking: tty_mutex protects tty, tty_lookup_driver and tty_init_dev.
* tty->count should protect the rest.
* ->siglock protects ->signal/->sighand
+ *
+ * Note: the tty_unlock/lock cases without a ref are only safe due to
+ * tty_mutex
*/
static int tty_open(struct inode *inode, struct file *filp)
@@ -1916,8 +1933,7 @@ retry_open:
retval = 0;
mutex_lock(&tty_mutex);
- tty_lock();
-
+ /* This is protected by the tty_mutex */
tty = tty_open_current_tty(device, filp);
if (IS_ERR(tty)) {
retval = PTR_ERR(tty);
@@ -1938,17 +1954,19 @@ retry_open:
}
if (tty) {
+ tty_lock(tty);
retval = tty_reopen(tty);
- if (retval)
+ if (retval < 0) {
+ tty_unlock(tty);
tty = ERR_PTR(retval);
- } else
+ }
+ } else /* Returns with the tty_lock held for now */
tty = tty_init_dev(driver, index);
mutex_unlock(&tty_mutex);
if (driver)
tty_driver_kref_put(driver);
if (IS_ERR(tty)) {
- tty_unlock();
retval = PTR_ERR(tty);
goto err_file;
}
@@ -1977,7 +1995,7 @@ retry_open:
printk(KERN_DEBUG "%s: error %d in opening %s...\n", __func__,
retval, tty->name);
#endif
- tty_unlock(); /* need to call tty_release without BTM */
+ tty_unlock(tty); /* need to call tty_release without BTM */
tty_release(inode, filp);
if (retval != -ERESTARTSYS)
return retval;
@@ -1989,17 +2007,15 @@ retry_open:
/*
* Need to reset f_op in case a hangup happened.
*/
- tty_lock();
if (filp->f_op == &hung_up_tty_fops)
filp->f_op = &tty_fops;
- tty_unlock();
goto retry_open;
}
- tty_unlock();
+ tty_unlock(tty);
mutex_lock(&tty_mutex);
- tty_lock();
+ tty_lock(tty);
spin_lock_irq(&current->sighand->siglock);
if (!noctty &&
current->signal->leader &&
@@ -2007,11 +2023,10 @@ retry_open:
tty->session == NULL)
__proc_set_tty(current, tty);
spin_unlock_irq(&current->sighand->siglock);
- tty_unlock();
+ tty_unlock(tty);
mutex_unlock(&tty_mutex);
return 0;
err_unlock:
- tty_unlock();
mutex_unlock(&tty_mutex);
/* after locks to avoid deadlock */
if (!IS_ERR_OR_NULL(driver))
@@ -2094,10 +2109,13 @@ out:
static int tty_fasync(int fd, struct file *filp, int on)
{
+ struct tty_struct *tty = file_tty(filp);
int retval;
- tty_lock();
+
+ tty_lock(tty);
retval = __tty_fasync(fd, filp, on);
- tty_unlock();
+ tty_unlock(tty);
+
return retval;
}
@@ -2756,7 +2774,7 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
if (ld->ops->ioctl) {
retval = ld->ops->ioctl(tty, file, cmd, arg);
if (retval == -ENOIOCTLCMD)
- retval = -EINVAL;
+ retval = -ENOTTY;
}
tty_ldisc_deref(ld);
return retval;
@@ -2934,6 +2952,7 @@ void initialize_tty_struct(struct tty_struct *tty,
tty->pgrp = NULL;
tty->overrun_time = jiffies;
tty_buffer_init(tty);
+ mutex_init(&tty->legacy_mutex);
mutex_init(&tty->termios_mutex);
mutex_init(&tty->ldisc_mutex);
init_waitqueue_head(&tty->write_wait);
@@ -2991,6 +3010,15 @@ EXPORT_SYMBOL_GPL(tty_put_char);
struct class *tty_class;
+static int tty_cdev_add(struct tty_driver *driver, dev_t dev,
+ unsigned int index, unsigned int count)
+{
+ /* init here, since reused cdevs cause crashes */
+ cdev_init(&driver->cdevs[index], &tty_fops);
+ driver->cdevs[index].owner = driver->owner;
+ return cdev_add(&driver->cdevs[index], dev, count);
+}
+
/**
* tty_register_device - register a tty device
* @driver: the tty driver that describes the tty device
@@ -3013,8 +3041,46 @@ struct class *tty_class;
struct device *tty_register_device(struct tty_driver *driver, unsigned index,
struct device *device)
{
+ return tty_register_device_attr(driver, index, device, NULL, NULL);
+}
+EXPORT_SYMBOL(tty_register_device);
+
+static void tty_device_create_release(struct device *dev)
+{
+ pr_debug("device: '%s': %s\n", dev_name(dev), __func__);
+ kfree(dev);
+}
+
+/**
+ * tty_register_device_attr - register a tty device
+ * @driver: the tty driver that describes the tty device
+ * @index: the index in the tty driver for this tty device
+ * @device: a struct device that is associated with this tty device.
+ * This field is optional, if there is no known struct device
+ * for this tty device it can be set to NULL safely.
+ * @drvdata: Driver data to be set to device.
+ * @attr_grp: Attribute group to be set on device.
+ *
+ * Returns a pointer to the struct device for this tty device
+ * (or ERR_PTR(-EFOO) on error).
+ *
+ * This call is required to be made to register an individual tty device
+ * if the tty driver's flags have the TTY_DRIVER_DYNAMIC_DEV bit set. If
+ * that bit is not set, this function should not be called by a tty
+ * driver.
+ *
+ * Locking: ??
+ */
+struct device *tty_register_device_attr(struct tty_driver *driver,
+ unsigned index, struct device *device,
+ void *drvdata,
+ const struct attribute_group **attr_grp)
+{
char name[64];
- dev_t dev = MKDEV(driver->major, driver->minor_start) + index;
+ dev_t devt = MKDEV(driver->major, driver->minor_start) + index;
+ struct device *dev = NULL;
+ int retval = -ENODEV;
+ bool cdev = false;
if (index >= driver->num) {
printk(KERN_ERR "Attempt to register invalid tty line number "
@@ -3027,9 +3093,40 @@ struct device *tty_register_device(struct tty_driver *driver, unsigned index,
else
tty_line_name(driver, index, name);
- return device_create(tty_class, device, dev, NULL, name);
+ if (!(driver->flags & TTY_DRIVER_DYNAMIC_ALLOC)) {
+ retval = tty_cdev_add(driver, devt, index, 1);
+ if (retval)
+ goto error;
+ cdev = true;
+ }
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev) {
+ retval = -ENOMEM;
+ goto error;
+ }
+
+ dev->devt = devt;
+ dev->class = tty_class;
+ dev->parent = device;
+ dev->release = tty_device_create_release;
+ dev_set_name(dev, "%s", name);
+ dev->groups = attr_grp;
+ dev_set_drvdata(dev, drvdata);
+
+ retval = device_register(dev);
+ if (retval)
+ goto error;
+
+ return dev;
+
+error:
+ put_device(dev);
+ if (cdev)
+ cdev_del(&driver->cdevs[index]);
+ return ERR_PTR(retval);
}
-EXPORT_SYMBOL(tty_register_device);
+EXPORT_SYMBOL_GPL(tty_register_device_attr);
/**
* tty_unregister_device - unregister a tty device
@@ -3046,31 +3143,82 @@ void tty_unregister_device(struct tty_driver *driver, unsigned index)
{
device_destroy(tty_class,
MKDEV(driver->major, driver->minor_start) + index);
+ if (!(driver->flags & TTY_DRIVER_DYNAMIC_ALLOC))
+ cdev_del(&driver->cdevs[index]);
}
EXPORT_SYMBOL(tty_unregister_device);
-struct tty_driver *__alloc_tty_driver(int lines, struct module *owner)
+/**
+ * __tty_alloc_driver -- allocate tty driver
+ * @lines: count of lines this driver can handle at most
+ * @owner: module which is repsonsible for this driver
+ * @flags: some of TTY_DRIVER_* flags, will be set in driver->flags
+ *
+ * This should not be called directly, some of the provided macros should be
+ * used instead. Use IS_ERR and friends on @retval.
+ */
+struct tty_driver *__tty_alloc_driver(unsigned int lines, struct module *owner,
+ unsigned long flags)
{
struct tty_driver *driver;
+ unsigned int cdevs = 1;
+ int err;
+
+ if (!lines || (flags & TTY_DRIVER_UNNUMBERED_NODE && lines > 1))
+ return ERR_PTR(-EINVAL);
driver = kzalloc(sizeof(struct tty_driver), GFP_KERNEL);
- if (driver) {
- kref_init(&driver->kref);
- driver->magic = TTY_DRIVER_MAGIC;
- driver->num = lines;
- driver->owner = owner;
- /* later we'll move allocation of tables here */
+ if (!driver)
+ return ERR_PTR(-ENOMEM);
+
+ kref_init(&driver->kref);
+ driver->magic = TTY_DRIVER_MAGIC;
+ driver->num = lines;
+ driver->owner = owner;
+ driver->flags = flags;
+
+ if (!(flags & TTY_DRIVER_DEVPTS_MEM)) {
+ driver->ttys = kcalloc(lines, sizeof(*driver->ttys),
+ GFP_KERNEL);
+ driver->termios = kcalloc(lines, sizeof(*driver->termios),
+ GFP_KERNEL);
+ if (!driver->ttys || !driver->termios) {
+ err = -ENOMEM;
+ goto err_free_all;
+ }
}
+
+ if (!(flags & TTY_DRIVER_DYNAMIC_ALLOC)) {
+ driver->ports = kcalloc(lines, sizeof(*driver->ports),
+ GFP_KERNEL);
+ if (!driver->ports) {
+ err = -ENOMEM;
+ goto err_free_all;
+ }
+ cdevs = lines;
+ }
+
+ driver->cdevs = kcalloc(cdevs, sizeof(*driver->cdevs), GFP_KERNEL);
+ if (!driver->cdevs) {
+ err = -ENOMEM;
+ goto err_free_all;
+ }
+
return driver;
+err_free_all:
+ kfree(driver->ports);
+ kfree(driver->ttys);
+ kfree(driver->termios);
+ kfree(driver);
+ return ERR_PTR(err);
}
-EXPORT_SYMBOL(__alloc_tty_driver);
+EXPORT_SYMBOL(__tty_alloc_driver);
static void destruct_tty_driver(struct kref *kref)
{
struct tty_driver *driver = container_of(kref, struct tty_driver, kref);
int i;
struct ktermios *tp;
- void *p;
if (driver->flags & TTY_DRIVER_INSTALLED) {
/*
@@ -3087,13 +3235,14 @@ static void destruct_tty_driver(struct kref *kref)
if (!(driver->flags & TTY_DRIVER_DYNAMIC_DEV))
tty_unregister_device(driver, i);
}
- p = driver->ttys;
proc_tty_unregister_driver(driver);
- driver->ttys = NULL;
- driver->termios = NULL;
- kfree(p);
- cdev_del(&driver->cdev);
+ if (driver->flags & TTY_DRIVER_DYNAMIC_ALLOC)
+ cdev_del(&driver->cdevs[0]);
}
+ kfree(driver->cdevs);
+ kfree(driver->ports);
+ kfree(driver->termios);
+ kfree(driver->ttys);
kfree(driver);
}
@@ -3124,15 +3273,8 @@ int tty_register_driver(struct tty_driver *driver)
int error;
int i;
dev_t dev;
- void **p = NULL;
struct device *d;
- if (!(driver->flags & TTY_DRIVER_DEVPTS_MEM) && driver->num) {
- p = kzalloc(driver->num * 2 * sizeof(void *), GFP_KERNEL);
- if (!p)
- return -ENOMEM;
- }
-
if (!driver->major) {
error = alloc_chrdev_region(&dev, driver->minor_start,
driver->num, driver->name);
@@ -3144,28 +3286,13 @@ int tty_register_driver(struct tty_driver *driver)
dev = MKDEV(driver->major, driver->minor_start);
error = register_chrdev_region(dev, driver->num, driver->name);
}
- if (error < 0) {
- kfree(p);
- return error;
- }
+ if (error < 0)
+ goto err;
- if (p) {
- driver->ttys = (struct tty_struct **)p;
- driver->termios = (struct ktermios **)(p + driver->num);
- } else {
- driver->ttys = NULL;
- driver->termios = NULL;
- }
-
- cdev_init(&driver->cdev, &tty_fops);
- driver->cdev.owner = driver->owner;
- error = cdev_add(&driver->cdev, dev, driver->num);
- if (error) {
- unregister_chrdev_region(dev, driver->num);
- driver->ttys = NULL;
- driver->termios = NULL;
- kfree(p);
- return error;
+ if (driver->flags & TTY_DRIVER_DYNAMIC_ALLOC) {
+ error = tty_cdev_add(driver, dev, 0, driver->num);
+ if (error)
+ goto err_unreg_char;
}
mutex_lock(&tty_mutex);
@@ -3177,7 +3304,7 @@ int tty_register_driver(struct tty_driver *driver)
d = tty_register_device(driver, i, NULL);
if (IS_ERR(d)) {
error = PTR_ERR(d);
- goto err;
+ goto err_unreg_devs;
}
}
}
@@ -3185,7 +3312,7 @@ int tty_register_driver(struct tty_driver *driver)
driver->flags |= TTY_DRIVER_INSTALLED;
return 0;
-err:
+err_unreg_devs:
for (i--; i >= 0; i--)
tty_unregister_device(driver, i);
@@ -3193,13 +3320,11 @@ err:
list_del(&driver->tty_drivers);
mutex_unlock(&tty_mutex);
+err_unreg_char:
unregister_chrdev_region(dev, driver->num);
- driver->ttys = NULL;
- driver->termios = NULL;
- kfree(p);
+err:
return error;
}
-
EXPORT_SYMBOL(tty_register_driver);
/*
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index a1b9a2f6856..12b1fa0f4f8 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -410,7 +410,7 @@ EXPORT_SYMBOL_GPL(tty_termios_encode_baud_rate);
void tty_encode_baud_rate(struct tty_struct *tty, speed_t ibaud, speed_t obaud)
{
- tty_termios_encode_baud_rate(tty->termios, ibaud, obaud);
+ tty_termios_encode_baud_rate(&tty->termios, ibaud, obaud);
}
EXPORT_SYMBOL_GPL(tty_encode_baud_rate);
@@ -427,7 +427,7 @@ EXPORT_SYMBOL_GPL(tty_encode_baud_rate);
speed_t tty_get_baud_rate(struct tty_struct *tty)
{
- speed_t baud = tty_termios_baud_rate(tty->termios);
+ speed_t baud = tty_termios_baud_rate(&tty->termios);
if (baud == 38400 && tty->alt_speed) {
if (!tty->warned) {
@@ -509,14 +509,14 @@ int tty_set_termios(struct tty_struct *tty, struct ktermios *new_termios)
/* FIXME: we need to decide on some locking/ordering semantics
for the set_termios notification eventually */
mutex_lock(&tty->termios_mutex);
- old_termios = *tty->termios;
- *tty->termios = *new_termios;
- unset_locked_termios(tty->termios, &old_termios, tty->termios_locked);
+ old_termios = tty->termios;
+ tty->termios = *new_termios;
+ unset_locked_termios(&tty->termios, &old_termios, &tty->termios_locked);
/* See if packet mode change of state. */
if (tty->link && tty->link->packet) {
int extproc = (old_termios.c_lflag & EXTPROC) |
- (tty->termios->c_lflag & EXTPROC);
+ (tty->termios.c_lflag & EXTPROC);
int old_flow = ((old_termios.c_iflag & IXON) &&
(old_termios.c_cc[VSTOP] == '\023') &&
(old_termios.c_cc[VSTART] == '\021'));
@@ -542,7 +542,7 @@ int tty_set_termios(struct tty_struct *tty, struct ktermios *new_termios)
if (tty->ops->set_termios)
(*tty->ops->set_termios)(tty, &old_termios);
else
- tty_termios_copy_hw(tty->termios, &old_termios);
+ tty_termios_copy_hw(&tty->termios, &old_termios);
ld = tty_ldisc_ref(tty);
if (ld != NULL) {
@@ -578,7 +578,7 @@ static int set_termios(struct tty_struct *tty, void __user *arg, int opt)
return retval;
mutex_lock(&tty->termios_mutex);
- memcpy(&tmp_termios, tty->termios, sizeof(struct ktermios));
+ tmp_termios = tty->termios;
mutex_unlock(&tty->termios_mutex);
if (opt & TERMIOS_TERMIO) {
@@ -632,14 +632,14 @@ static int set_termios(struct tty_struct *tty, void __user *arg, int opt)
static void copy_termios(struct tty_struct *tty, struct ktermios *kterm)
{
mutex_lock(&tty->termios_mutex);
- memcpy(kterm, tty->termios, sizeof(struct ktermios));
+ *kterm = tty->termios;
mutex_unlock(&tty->termios_mutex);
}
static void copy_termios_locked(struct tty_struct *tty, struct ktermios *kterm)
{
mutex_lock(&tty->termios_mutex);
- memcpy(kterm, tty->termios_locked, sizeof(struct ktermios));
+ *kterm = tty->termios_locked;
mutex_unlock(&tty->termios_mutex);
}
@@ -707,16 +707,16 @@ static int get_sgflags(struct tty_struct *tty)
{
int flags = 0;
- if (!(tty->termios->c_lflag & ICANON)) {
- if (tty->termios->c_lflag & ISIG)
+ if (!(tty->termios.c_lflag & ICANON)) {
+ if (tty->termios.c_lflag & ISIG)
flags |= 0x02; /* cbreak */
else
flags |= 0x20; /* raw */
}
- if (tty->termios->c_lflag & ECHO)
+ if (tty->termios.c_lflag & ECHO)
flags |= 0x08; /* echo */
- if (tty->termios->c_oflag & OPOST)
- if (tty->termios->c_oflag & ONLCR)
+ if (tty->termios.c_oflag & OPOST)
+ if (tty->termios.c_oflag & ONLCR)
flags |= 0x10; /* crmod */
return flags;
}
@@ -726,10 +726,10 @@ static int get_sgttyb(struct tty_struct *tty, struct sgttyb __user *sgttyb)
struct sgttyb tmp;
mutex_lock(&tty->termios_mutex);
- tmp.sg_ispeed = tty->termios->c_ispeed;
- tmp.sg_ospeed = tty->termios->c_ospeed;
- tmp.sg_erase = tty->termios->c_cc[VERASE];
- tmp.sg_kill = tty->termios->c_cc[VKILL];
+ tmp.sg_ispeed = tty->termios.c_ispeed;
+ tmp.sg_ospeed = tty->termios.c_ospeed;
+ tmp.sg_erase = tty->termios.c_cc[VERASE];
+ tmp.sg_kill = tty->termios.c_cc[VKILL];
tmp.sg_flags = get_sgflags(tty);
mutex_unlock(&tty->termios_mutex);
@@ -787,7 +787,7 @@ static int set_sgttyb(struct tty_struct *tty, struct sgttyb __user *sgttyb)
return -EFAULT;
mutex_lock(&tty->termios_mutex);
- termios = *tty->termios;
+ termios = tty->termios;
termios.c_cc[VERASE] = tmp.sg_erase;
termios.c_cc[VKILL] = tmp.sg_kill;
set_sgflags(&termios, tmp.sg_flags);
@@ -808,12 +808,12 @@ static int get_tchars(struct tty_struct *tty, struct tchars __user *tchars)
struct tchars tmp;
mutex_lock(&tty->termios_mutex);
- tmp.t_intrc = tty->termios->c_cc[VINTR];
- tmp.t_quitc = tty->termios->c_cc[VQUIT];
- tmp.t_startc = tty->termios->c_cc[VSTART];
- tmp.t_stopc = tty->termios->c_cc[VSTOP];
- tmp.t_eofc = tty->termios->c_cc[VEOF];
- tmp.t_brkc = tty->termios->c_cc[VEOL2]; /* what is brkc anyway? */
+ tmp.t_intrc = tty->termios.c_cc[VINTR];
+ tmp.t_quitc = tty->termios.c_cc[VQUIT];
+ tmp.t_startc = tty->termios.c_cc[VSTART];
+ tmp.t_stopc = tty->termios.c_cc[VSTOP];
+ tmp.t_eofc = tty->termios.c_cc[VEOF];
+ tmp.t_brkc = tty->termios.c_cc[VEOL2]; /* what is brkc anyway? */
mutex_unlock(&tty->termios_mutex);
return copy_to_user(tchars, &tmp, sizeof(tmp)) ? -EFAULT : 0;
}
@@ -825,12 +825,12 @@ static int set_tchars(struct tty_struct *tty, struct tchars __user *tchars)
if (copy_from_user(&tmp, tchars, sizeof(tmp)))
return -EFAULT;
mutex_lock(&tty->termios_mutex);
- tty->termios->c_cc[VINTR] = tmp.t_intrc;
- tty->termios->c_cc[VQUIT] = tmp.t_quitc;
- tty->termios->c_cc[VSTART] = tmp.t_startc;
- tty->termios->c_cc[VSTOP] = tmp.t_stopc;
- tty->termios->c_cc[VEOF] = tmp.t_eofc;
- tty->termios->c_cc[VEOL2] = tmp.t_brkc; /* what is brkc anyway? */
+ tty->termios.c_cc[VINTR] = tmp.t_intrc;
+ tty->termios.c_cc[VQUIT] = tmp.t_quitc;
+ tty->termios.c_cc[VSTART] = tmp.t_startc;
+ tty->termios.c_cc[VSTOP] = tmp.t_stopc;
+ tty->termios.c_cc[VEOF] = tmp.t_eofc;
+ tty->termios.c_cc[VEOL2] = tmp.t_brkc; /* what is brkc anyway? */
mutex_unlock(&tty->termios_mutex);
return 0;
}
@@ -842,14 +842,14 @@ static int get_ltchars(struct tty_struct *tty, struct ltchars __user *ltchars)
struct ltchars tmp;
mutex_lock(&tty->termios_mutex);
- tmp.t_suspc = tty->termios->c_cc[VSUSP];
+ tmp.t_suspc = tty->termios.c_cc[VSUSP];
/* what is dsuspc anyway? */
- tmp.t_dsuspc = tty->termios->c_cc[VSUSP];
- tmp.t_rprntc = tty->termios->c_cc[VREPRINT];
+ tmp.t_dsuspc = tty->termios.c_cc[VSUSP];
+ tmp.t_rprntc = tty->termios.c_cc[VREPRINT];
/* what is flushc anyway? */
- tmp.t_flushc = tty->termios->c_cc[VEOL2];
- tmp.t_werasc = tty->termios->c_cc[VWERASE];
- tmp.t_lnextc = tty->termios->c_cc[VLNEXT];
+ tmp.t_flushc = tty->termios.c_cc[VEOL2];
+ tmp.t_werasc = tty->termios.c_cc[VWERASE];
+ tmp.t_lnextc = tty->termios.c_cc[VLNEXT];
mutex_unlock(&tty->termios_mutex);
return copy_to_user(ltchars, &tmp, sizeof(tmp)) ? -EFAULT : 0;
}
@@ -862,14 +862,14 @@ static int set_ltchars(struct tty_struct *tty, struct ltchars __user *ltchars)
return -EFAULT;
mutex_lock(&tty->termios_mutex);
- tty->termios->c_cc[VSUSP] = tmp.t_suspc;
+ tty->termios.c_cc[VSUSP] = tmp.t_suspc;
/* what is dsuspc anyway? */
- tty->termios->c_cc[VEOL2] = tmp.t_dsuspc;
- tty->termios->c_cc[VREPRINT] = tmp.t_rprntc;
+ tty->termios.c_cc[VEOL2] = tmp.t_dsuspc;
+ tty->termios.c_cc[VREPRINT] = tmp.t_rprntc;
/* what is flushc anyway? */
- tty->termios->c_cc[VEOL2] = tmp.t_flushc;
- tty->termios->c_cc[VWERASE] = tmp.t_werasc;
- tty->termios->c_cc[VLNEXT] = tmp.t_lnextc;
+ tty->termios.c_cc[VEOL2] = tmp.t_flushc;
+ tty->termios.c_cc[VWERASE] = tmp.t_werasc;
+ tty->termios.c_cc[VLNEXT] = tmp.t_lnextc;
mutex_unlock(&tty->termios_mutex);
return 0;
}
@@ -920,12 +920,12 @@ static int tty_change_softcar(struct tty_struct *tty, int arg)
struct ktermios old;
mutex_lock(&tty->termios_mutex);
- old = *tty->termios;
- tty->termios->c_cflag &= ~CLOCAL;
- tty->termios->c_cflag |= bit;
+ old = tty->termios;
+ tty->termios.c_cflag &= ~CLOCAL;
+ tty->termios.c_cflag |= bit;
if (tty->ops->set_termios)
tty->ops->set_termios(tty, &old);
- if ((tty->termios->c_cflag & CLOCAL) != bit)
+ if ((tty->termios.c_cflag & CLOCAL) != bit)
ret = -EINVAL;
mutex_unlock(&tty->termios_mutex);
return ret;
@@ -1031,7 +1031,7 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
(struct termios __user *) arg))
return -EFAULT;
mutex_lock(&real_tty->termios_mutex);
- memcpy(real_tty->termios_locked, &kterm, sizeof(struct ktermios));
+ real_tty->termios_locked = kterm;
mutex_unlock(&real_tty->termios_mutex);
return 0;
#else
@@ -1048,7 +1048,7 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
(struct termios __user *) arg))
return -EFAULT;
mutex_lock(&real_tty->termios_mutex);
- memcpy(real_tty->termios_locked, &kterm, sizeof(struct ktermios));
+ real_tty->termios_locked = kterm;
mutex_unlock(&real_tty->termios_mutex);
return ret;
#endif
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 6f99c9959f0..4d7b56268c7 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -413,7 +413,7 @@ EXPORT_SYMBOL_GPL(tty_ldisc_flush);
static void tty_set_termios_ldisc(struct tty_struct *tty, int num)
{
mutex_lock(&tty->termios_mutex);
- tty->termios->c_line = num;
+ tty->termios.c_line = num;
mutex_unlock(&tty->termios_mutex);
}
@@ -568,7 +568,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
if (IS_ERR(new_ldisc))
return PTR_ERR(new_ldisc);
- tty_lock();
+ tty_lock(tty);
/*
* We need to look at the tty locking here for pty/tty pairs
* when both sides try to change in parallel.
@@ -582,12 +582,12 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
*/
if (tty->ldisc->ops->num == ldisc) {
- tty_unlock();
+ tty_unlock(tty);
tty_ldisc_put(new_ldisc);
return 0;
}
- tty_unlock();
+ tty_unlock(tty);
/*
* Problem: What do we do if this blocks ?
* We could deadlock here
@@ -595,7 +595,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
tty_wait_until_sent(tty, 0);
- tty_lock();
+ tty_lock(tty);
mutex_lock(&tty->ldisc_mutex);
/*
@@ -605,10 +605,10 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
while (test_bit(TTY_LDISC_CHANGING, &tty->flags)) {
mutex_unlock(&tty->ldisc_mutex);
- tty_unlock();
+ tty_unlock(tty);
wait_event(tty_ldisc_wait,
test_bit(TTY_LDISC_CHANGING, &tty->flags) == 0);
- tty_lock();
+ tty_lock(tty);
mutex_lock(&tty->ldisc_mutex);
}
@@ -623,7 +623,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
o_ldisc = tty->ldisc;
- tty_unlock();
+ tty_unlock(tty);
/*
* Make sure we don't change while someone holds a
* reference to the line discipline. The TTY_LDISC bit
@@ -650,7 +650,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
retval = tty_ldisc_wait_idle(tty, 5 * HZ);
- tty_lock();
+ tty_lock(tty);
mutex_lock(&tty->ldisc_mutex);
/* handle wait idle failure locked */
@@ -665,7 +665,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
clear_bit(TTY_LDISC_CHANGING, &tty->flags);
mutex_unlock(&tty->ldisc_mutex);
tty_ldisc_put(new_ldisc);
- tty_unlock();
+ tty_unlock(tty);
return -EIO;
}
@@ -708,7 +708,7 @@ enable:
if (o_work)
schedule_work(&o_tty->buf.work);
mutex_unlock(&tty->ldisc_mutex);
- tty_unlock();
+ tty_unlock(tty);
return retval;
}
@@ -722,9 +722,9 @@ enable:
static void tty_reset_termios(struct tty_struct *tty)
{
mutex_lock(&tty->termios_mutex);
- *tty->termios = tty->driver->init_termios;
- tty->termios->c_ispeed = tty_termios_input_baud_rate(tty->termios);
- tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios);
+ tty->termios = tty->driver->init_termios;
+ tty->termios.c_ispeed = tty_termios_input_baud_rate(&tty->termios);
+ tty->termios.c_ospeed = tty_termios_baud_rate(&tty->termios);
mutex_unlock(&tty->termios_mutex);
}
@@ -816,11 +816,11 @@ void tty_ldisc_hangup(struct tty_struct *tty)
* need to wait for another function taking the BTM
*/
clear_bit(TTY_LDISC, &tty->flags);
- tty_unlock();
+ tty_unlock(tty);
cancel_work_sync(&tty->buf.work);
mutex_unlock(&tty->ldisc_mutex);
retry:
- tty_lock();
+ tty_lock(tty);
mutex_lock(&tty->ldisc_mutex);
/* At this point we have a closed ldisc and we want to
@@ -831,7 +831,7 @@ retry:
if (atomic_read(&tty->ldisc->users) != 1) {
char cur_n[TASK_COMM_LEN], tty_n[64];
long timeout = 3 * HZ;
- tty_unlock();
+ tty_unlock(tty);
while (tty_ldisc_wait_idle(tty, timeout) == -EBUSY) {
timeout = MAX_SCHEDULE_TIMEOUT;
@@ -846,7 +846,7 @@ retry:
if (reset == 0) {
- if (!tty_ldisc_reinit(tty, tty->termios->c_line))
+ if (!tty_ldisc_reinit(tty, tty->termios.c_line))
err = tty_ldisc_open(tty, tty->ldisc);
else
err = 1;
@@ -894,6 +894,23 @@ int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty)
tty_ldisc_enable(tty);
return 0;
}
+
+static void tty_ldisc_kill(struct tty_struct *tty)
+{
+ mutex_lock(&tty->ldisc_mutex);
+ /*
+ * Now kill off the ldisc
+ */
+ tty_ldisc_close(tty, tty->ldisc);
+ tty_ldisc_put(tty->ldisc);
+ /* Force an oops if we mess this up */
+ tty->ldisc = NULL;
+
+ /* Ensure the next open requests the N_TTY ldisc */
+ tty_set_termios_ldisc(tty, N_TTY);
+ mutex_unlock(&tty->ldisc_mutex);
+}
+
/**
* tty_ldisc_release - release line discipline
* @tty: tty being shut down
@@ -912,28 +929,21 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty)
* race with the set_ldisc code path.
*/
- tty_unlock();
+ tty_lock_pair(tty, o_tty);
tty_ldisc_halt(tty);
tty_ldisc_flush_works(tty);
- tty_lock();
-
- mutex_lock(&tty->ldisc_mutex);
- /*
- * Now kill off the ldisc
- */
- tty_ldisc_close(tty, tty->ldisc);
- tty_ldisc_put(tty->ldisc);
- /* Force an oops if we mess this up */
- tty->ldisc = NULL;
-
- /* Ensure the next open requests the N_TTY ldisc */
- tty_set_termios_ldisc(tty, N_TTY);
- mutex_unlock(&tty->ldisc_mutex);
+ if (o_tty) {
+ tty_ldisc_halt(o_tty);
+ tty_ldisc_flush_works(o_tty);
+ }
/* This will need doing differently if we need to lock */
+ tty_ldisc_kill(tty);
+
if (o_tty)
- tty_ldisc_release(o_tty, NULL);
+ tty_ldisc_kill(o_tty);
+ tty_unlock_pair(tty, o_tty);
/* And the memory resources remaining (buffers, termios) will be
disposed of when the kref hits zero */
}
diff --git a/drivers/tty/tty_mutex.c b/drivers/tty/tty_mutex.c
index 9ff986c32a2..67feac9e6eb 100644
--- a/drivers/tty/tty_mutex.c
+++ b/drivers/tty/tty_mutex.c
@@ -4,29 +4,70 @@
#include <linux/semaphore.h>
#include <linux/sched.h>
-/*
- * The 'big tty mutex'
- *
- * This mutex is taken and released by tty_lock() and tty_unlock(),
- * replacing the older big kernel lock.
- * It can no longer be taken recursively, and does not get
- * released implicitly while sleeping.
- *
- * Don't use in new code.
- */
-static DEFINE_MUTEX(big_tty_mutex);
+/* Legacy tty mutex glue */
+
+enum {
+ TTY_MUTEX_NORMAL,
+ TTY_MUTEX_NESTED,
+};
/*
* Getting the big tty mutex.
*/
-void __lockfunc tty_lock(void)
+
+static void __lockfunc tty_lock_nested(struct tty_struct *tty,
+ unsigned int subclass)
{
- mutex_lock(&big_tty_mutex);
+ if (tty->magic != TTY_MAGIC) {
+ printk(KERN_ERR "L Bad %p\n", tty);
+ WARN_ON(1);
+ return;
+ }
+ tty_kref_get(tty);
+ mutex_lock_nested(&tty->legacy_mutex, subclass);
+}
+
+void __lockfunc tty_lock(struct tty_struct *tty)
+{
+ return tty_lock_nested(tty, TTY_MUTEX_NORMAL);
}
EXPORT_SYMBOL(tty_lock);
-void __lockfunc tty_unlock(void)
+void __lockfunc tty_unlock(struct tty_struct *tty)
{
- mutex_unlock(&big_tty_mutex);
+ if (tty->magic != TTY_MAGIC) {
+ printk(KERN_ERR "U Bad %p\n", tty);
+ WARN_ON(1);
+ return;
+ }
+ mutex_unlock(&tty->legacy_mutex);
+ tty_kref_put(tty);
}
EXPORT_SYMBOL(tty_unlock);
+
+/*
+ * Getting the big tty mutex for a pair of ttys with lock ordering
+ * On a non pty/tty pair tty2 can be NULL which is just fine.
+ */
+void __lockfunc tty_lock_pair(struct tty_struct *tty,
+ struct tty_struct *tty2)
+{
+ if (tty < tty2) {
+ tty_lock(tty);
+ tty_lock_nested(tty2, TTY_MUTEX_NESTED);
+ } else {
+ if (tty2 && tty2 != tty)
+ tty_lock(tty2);
+ tty_lock_nested(tty, TTY_MUTEX_NESTED);
+ }
+}
+EXPORT_SYMBOL(tty_lock_pair);
+
+void __lockfunc tty_unlock_pair(struct tty_struct *tty,
+ struct tty_struct *tty2)
+{
+ tty_unlock(tty);
+ if (tty2 && tty2 != tty)
+ tty_unlock(tty2);
+}
+EXPORT_SYMBOL(tty_unlock_pair);
diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c
index bf6e238146a..d7bdd8d0c23 100644
--- a/drivers/tty/tty_port.c
+++ b/drivers/tty/tty_port.c
@@ -33,6 +33,70 @@ void tty_port_init(struct tty_port *port)
}
EXPORT_SYMBOL(tty_port_init);
+/**
+ * tty_port_link_device - link tty and tty_port
+ * @port: tty_port of the device
+ * @driver: tty_driver for this device
+ * @index: index of the tty
+ *
+ * Provide the tty layer wit ha link from a tty (specified by @index) to a
+ * tty_port (@port). Use this only if neither tty_port_register_device nor
+ * tty_port_install is used in the driver. If used, this has to be called before
+ * tty_register_driver.
+ */
+void tty_port_link_device(struct tty_port *port,
+ struct tty_driver *driver, unsigned index)
+{
+ if (WARN_ON(index >= driver->num))
+ return;
+ driver->ports[index] = port;
+}
+EXPORT_SYMBOL_GPL(tty_port_link_device);
+
+/**
+ * tty_port_register_device - register tty device
+ * @port: tty_port of the device
+ * @driver: tty_driver for this device
+ * @index: index of the tty
+ * @device: parent if exists, otherwise NULL
+ *
+ * It is the same as tty_register_device except the provided @port is linked to
+ * a concrete tty specified by @index. Use this or tty_port_install (or both).
+ * Call tty_port_link_device as a last resort.
+ */
+struct device *tty_port_register_device(struct tty_port *port,
+ struct tty_driver *driver, unsigned index,
+ struct device *device)
+{
+ tty_port_link_device(port, driver, index);
+ return tty_register_device(driver, index, device);
+}
+EXPORT_SYMBOL_GPL(tty_port_register_device);
+
+/**
+ * tty_port_register_device_attr - register tty device
+ * @port: tty_port of the device
+ * @driver: tty_driver for this device
+ * @index: index of the tty
+ * @device: parent if exists, otherwise NULL
+ * @drvdata: Driver data to be set to device.
+ * @attr_grp: Attribute group to be set on device.
+ *
+ * It is the same as tty_register_device_attr except the provided @port is
+ * linked to a concrete tty specified by @index. Use this or tty_port_install
+ * (or both). Call tty_port_link_device as a last resort.
+ */
+struct device *tty_port_register_device_attr(struct tty_port *port,
+ struct tty_driver *driver, unsigned index,
+ struct device *device, void *drvdata,
+ const struct attribute_group **attr_grp)
+{
+ tty_port_link_device(port, driver, index);
+ return tty_register_device_attr(driver, index, device, drvdata,
+ attr_grp);
+}
+EXPORT_SYMBOL_GPL(tty_port_register_device_attr);
+
int tty_port_alloc_xmit_buf(struct tty_port *port)
{
/* We may sleep in get_zeroed_page() */
@@ -230,7 +294,7 @@ int tty_port_block_til_ready(struct tty_port *port,
/* block if port is in the process of being closed */
if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
- wait_event_interruptible_tty(port->close_wait,
+ wait_event_interruptible_tty(tty, port->close_wait,
!(port->flags & ASYNC_CLOSING));
if (port->flags & ASYNC_HUP_NOTIFY)
return -EAGAIN;
@@ -246,7 +310,7 @@ int tty_port_block_til_ready(struct tty_port *port,
}
if (filp->f_flags & O_NONBLOCK) {
/* Indicate we are open */
- if (tty->termios->c_cflag & CBAUD)
+ if (tty->termios.c_cflag & CBAUD)
tty_port_raise_dtr_rts(port);
port->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
@@ -270,7 +334,7 @@ int tty_port_block_til_ready(struct tty_port *port,
while (1) {
/* Indicate we are open */
- if (tty->termios->c_cflag & CBAUD)
+ if (tty->termios.c_cflag & CBAUD)
tty_port_raise_dtr_rts(port);
prepare_to_wait(&port->open_wait, &wait, TASK_INTERRUPTIBLE);
@@ -296,9 +360,9 @@ int tty_port_block_til_ready(struct tty_port *port,
retval = -ERESTARTSYS;
break;
}
- tty_unlock();
+ tty_unlock(tty);
schedule();
- tty_lock();
+ tty_lock(tty);
}
finish_wait(&port->open_wait, &wait);
@@ -369,7 +433,7 @@ int tty_port_close_start(struct tty_port *port,
/* Drop DTR/RTS if HUPCL is set. This causes any attached modem to
hang up the line */
- if (tty->termios->c_cflag & HUPCL)
+ if (tty->termios.c_cflag & HUPCL)
tty_port_lower_dtr_rts(port);
/* Don't call port->drop for the last reference. Callers will want
@@ -413,6 +477,24 @@ void tty_port_close(struct tty_port *port, struct tty_struct *tty,
}
EXPORT_SYMBOL(tty_port_close);
+/**
+ * tty_port_install - generic tty->ops->install handler
+ * @port: tty_port of the device
+ * @driver: tty_driver for this device
+ * @tty: tty to be installed
+ *
+ * It is the same as tty_standard_install except the provided @port is linked
+ * to a concrete tty specified by @tty. Use this or tty_port_register_device
+ * (or both). Call tty_port_link_device as a last resort.
+ */
+int tty_port_install(struct tty_port *port, struct tty_driver *driver,
+ struct tty_struct *tty)
+{
+ tty->port = port;
+ return tty_standard_install(driver, tty);
+}
+EXPORT_SYMBOL_GPL(tty_port_install);
+
int tty_port_open(struct tty_port *port, struct tty_struct *tty,
struct file *filp)
{
diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
index 48cc6f25cfd..681765baef6 100644
--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -119,6 +119,7 @@ static const int NR_TYPES = ARRAY_SIZE(max_vals);
static struct input_handler kbd_handler;
static DEFINE_SPINLOCK(kbd_event_lock);
+static DEFINE_SPINLOCK(led_lock);
static unsigned long key_down[BITS_TO_LONGS(KEY_CNT)]; /* keyboard key bitmap */
static unsigned char shift_down[NR_SHIFT]; /* shift state counters.. */
static bool dead_key_next;
@@ -310,7 +311,7 @@ static void put_queue(struct vc_data *vc, int ch)
if (tty) {
tty_insert_flip_char(tty, ch, 0);
- con_schedule_flip(tty);
+ tty_schedule_flip(tty);
}
}
@@ -325,7 +326,7 @@ static void puts_queue(struct vc_data *vc, char *cp)
tty_insert_flip_char(tty, *cp, 0);
cp++;
}
- con_schedule_flip(tty);
+ tty_schedule_flip(tty);
}
static void applkey(struct vc_data *vc, int key, char mode)
@@ -586,7 +587,7 @@ static void fn_send_intr(struct vc_data *vc)
if (!tty)
return;
tty_insert_flip_char(tty, 0, TTY_BREAK);
- con_schedule_flip(tty);
+ tty_schedule_flip(tty);
}
static void fn_scroll_forw(struct vc_data *vc)
@@ -984,7 +985,7 @@ static void k_brl(struct vc_data *vc, unsigned char value, char up_flag)
* or (ii) whatever pattern of lights people want to show using KDSETLED,
* or (iii) specified bits of specified words in kernel memory.
*/
-unsigned char getledstate(void)
+static unsigned char getledstate(void)
{
return ledstate;
}
@@ -992,7 +993,7 @@ unsigned char getledstate(void)
void setledstate(struct kbd_struct *kbd, unsigned int led)
{
unsigned long flags;
- spin_lock_irqsave(&kbd_event_lock, flags);
+ spin_lock_irqsave(&led_lock, flags);
if (!(led & ~7)) {
ledioctl = led;
kbd->ledmode = LED_SHOW_IOCTL;
@@ -1000,7 +1001,7 @@ void setledstate(struct kbd_struct *kbd, unsigned int led)
kbd->ledmode = LED_SHOW_FLAGS;
set_leds();
- spin_unlock_irqrestore(&kbd_event_lock, flags);
+ spin_unlock_irqrestore(&led_lock, flags);
}
static inline unsigned char getleds(void)
@@ -1049,13 +1050,13 @@ static int kbd_update_leds_helper(struct input_handle *handle, void *data)
*/
int vt_get_leds(int console, int flag)
{
- unsigned long flags;
struct kbd_struct * kbd = kbd_table + console;
int ret;
+ unsigned long flags;
- spin_lock_irqsave(&kbd_event_lock, flags);
+ spin_lock_irqsave(&led_lock, flags);
ret = vc_kbd_led(kbd, flag);
- spin_unlock_irqrestore(&kbd_event_lock, flags);
+ spin_unlock_irqrestore(&led_lock, flags);
return ret;
}
@@ -1091,11 +1092,11 @@ void vt_set_led_state(int console, int leds)
void vt_kbd_con_start(int console)
{
struct kbd_struct * kbd = kbd_table + console;
-/* unsigned long flags; */
-/* spin_lock_irqsave(&kbd_event_lock, flags); */
+ unsigned long flags;
+ spin_lock_irqsave(&led_lock, flags);
clr_vc_kbd_led(kbd, VC_SCROLLOCK);
set_leds();
-/* spin_unlock_irqrestore(&kbd_event_lock, flags); */
+ spin_unlock_irqrestore(&led_lock, flags);
}
/**
@@ -1104,21 +1105,15 @@ void vt_kbd_con_start(int console)
*
* Handle console stop. This is a wrapper for the VT layer
* so that we can keep kbd knowledge internal
- *
- * FIXME: We eventually need to hold the kbd lock here to protect
- * the LED updating. We can't do it yet because fn_hold calls stop_tty
- * and start_tty under the kbd_event_lock, while normal tty paths
- * don't hold the lock. We probably need to split out an LED lock
- * but not during an -rc release!
*/
void vt_kbd_con_stop(int console)
{
struct kbd_struct * kbd = kbd_table + console;
-/* unsigned long flags; */
-/* spin_lock_irqsave(&kbd_event_lock, flags); */
+ unsigned long flags;
+ spin_lock_irqsave(&led_lock, flags);
set_vc_kbd_led(kbd, VC_SCROLLOCK);
set_leds();
-/* spin_unlock_irqrestore(&kbd_event_lock, flags); */
+ spin_unlock_irqrestore(&led_lock, flags);
}
/*
@@ -1130,7 +1125,12 @@ void vt_kbd_con_stop(int console)
*/
static void kbd_bh(unsigned long dummy)
{
- unsigned char leds = getleds();
+ unsigned char leds;
+ unsigned long flags;
+
+ spin_lock_irqsave(&led_lock, flags);
+ leds = getleds();
+ spin_unlock_irqrestore(&led_lock, flags);
if (leds != ledstate) {
input_handler_for_each_handle(&kbd_handler, &leds,
@@ -2035,11 +2035,11 @@ int vt_do_kdskled(int console, int cmd, unsigned long arg, int perm)
return -EPERM;
if (arg & ~0x77)
return -EINVAL;
- spin_lock_irqsave(&kbd_event_lock, flags);
+ spin_lock_irqsave(&led_lock, flags);
kbd->ledflagstate = (arg & 7);
kbd->default_ledflagstate = ((arg >> 4) & 7);
set_leds();
- spin_unlock_irqrestore(&kbd_event_lock, flags);
+ spin_unlock_irqrestore(&led_lock, flags);
return 0;
/* the ioctls below only set the lights, not the functions */
@@ -2134,8 +2134,10 @@ void vt_reset_keyboard(int console)
clr_vc_kbd_mode(kbd, VC_CRLF);
kbd->lockstate = 0;
kbd->slockstate = 0;
+ spin_lock(&led_lock);
kbd->ledmode = LED_SHOW_FLAGS;
kbd->ledflagstate = kbd->default_ledflagstate;
+ spin_unlock(&led_lock);
/* do not do set_leds here because this causes an endless tasklet loop
when the keyboard hasn't been initialized yet */
spin_unlock_irqrestore(&kbd_event_lock, flags);
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 84cbf298c09..999ca63afde 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -537,45 +537,27 @@ void complement_pos(struct vc_data *vc, int offset)
static void insert_char(struct vc_data *vc, unsigned int nr)
{
- unsigned short *p, *q = (unsigned short *)vc->vc_pos;
+ unsigned short *p = (unsigned short *) vc->vc_pos;
- p = q + vc->vc_cols - nr - vc->vc_x;
- while (--p >= q)
- scr_writew(scr_readw(p), p + nr);
- scr_memsetw(q, vc->vc_video_erase_char, nr * 2);
+ scr_memmovew(p + nr, p, vc->vc_cols - vc->vc_x);
+ scr_memsetw(p, vc->vc_video_erase_char, nr * 2);
vc->vc_need_wrap = 0;
- if (DO_UPDATE(vc)) {
- unsigned short oldattr = vc->vc_attr;
- vc->vc_sw->con_bmove(vc, vc->vc_y, vc->vc_x, vc->vc_y, vc->vc_x + nr, 1,
- vc->vc_cols - vc->vc_x - nr);
- vc->vc_attr = vc->vc_video_erase_char >> 8;
- while (nr--)
- vc->vc_sw->con_putc(vc, vc->vc_video_erase_char, vc->vc_y, vc->vc_x + nr);
- vc->vc_attr = oldattr;
- }
+ if (DO_UPDATE(vc))
+ do_update_region(vc, (unsigned long) p,
+ (vc->vc_cols - vc->vc_x) / 2 + 1);
}
static void delete_char(struct vc_data *vc, unsigned int nr)
{
- unsigned int i = vc->vc_x;
- unsigned short *p = (unsigned short *)vc->vc_pos;
+ unsigned short *p = (unsigned short *) vc->vc_pos;
- while (++i <= vc->vc_cols - nr) {
- scr_writew(scr_readw(p+nr), p);
- p++;
- }
- scr_memsetw(p, vc->vc_video_erase_char, nr * 2);
+ scr_memcpyw(p, p + nr, vc->vc_cols - vc->vc_x - nr);
+ scr_memsetw(p + vc->vc_cols - vc->vc_x - nr, vc->vc_video_erase_char,
+ nr * 2);
vc->vc_need_wrap = 0;
- if (DO_UPDATE(vc)) {
- unsigned short oldattr = vc->vc_attr;
- vc->vc_sw->con_bmove(vc, vc->vc_y, vc->vc_x + nr, vc->vc_y, vc->vc_x, 1,
- vc->vc_cols - vc->vc_x - nr);
- vc->vc_attr = vc->vc_video_erase_char >> 8;
- while (nr--)
- vc->vc_sw->con_putc(vc, vc->vc_video_erase_char, vc->vc_y,
- vc->vc_cols - 1 - nr);
- vc->vc_attr = oldattr;
- }
+ if (DO_UPDATE(vc))
+ do_update_region(vc, (unsigned long) p,
+ (vc->vc_cols - vc->vc_x) / 2);
}
static int softcursor_original;
@@ -1172,45 +1154,26 @@ static void csi_J(struct vc_data *vc, int vpar)
case 0: /* erase from cursor to end of display */
count = (vc->vc_scr_end - vc->vc_pos) >> 1;
start = (unsigned short *)vc->vc_pos;
- if (DO_UPDATE(vc)) {
- /* do in two stages */
- vc->vc_sw->con_clear(vc, vc->vc_y, vc->vc_x, 1,
- vc->vc_cols - vc->vc_x);
- vc->vc_sw->con_clear(vc, vc->vc_y + 1, 0,
- vc->vc_rows - vc->vc_y - 1,
- vc->vc_cols);
- }
break;
case 1: /* erase from start to cursor */
count = ((vc->vc_pos - vc->vc_origin) >> 1) + 1;
start = (unsigned short *)vc->vc_origin;
- if (DO_UPDATE(vc)) {
- /* do in two stages */
- vc->vc_sw->con_clear(vc, 0, 0, vc->vc_y,
- vc->vc_cols);
- vc->vc_sw->con_clear(vc, vc->vc_y, 0, 1,
- vc->vc_x + 1);
- }
break;
case 3: /* erase scroll-back buffer (and whole display) */
scr_memsetw(vc->vc_screenbuf, vc->vc_video_erase_char,
vc->vc_screenbuf_size >> 1);
set_origin(vc);
- if (CON_IS_VISIBLE(vc))
- update_screen(vc);
/* fall through */
case 2: /* erase whole display */
count = vc->vc_cols * vc->vc_rows;
start = (unsigned short *)vc->vc_origin;
- if (DO_UPDATE(vc))
- vc->vc_sw->con_clear(vc, 0, 0,
- vc->vc_rows,
- vc->vc_cols);
break;
default:
return;
}
scr_memsetw(start, vc->vc_video_erase_char, 2 * count);
+ if (DO_UPDATE(vc))
+ do_update_region(vc, (unsigned long) start, count);
vc->vc_need_wrap = 0;
}
@@ -1223,29 +1186,22 @@ static void csi_K(struct vc_data *vc, int vpar)
case 0: /* erase from cursor to end of line */
count = vc->vc_cols - vc->vc_x;
start = (unsigned short *)vc->vc_pos;
- if (DO_UPDATE(vc))
- vc->vc_sw->con_clear(vc, vc->vc_y, vc->vc_x, 1,
- vc->vc_cols - vc->vc_x);
break;
case 1: /* erase from start of line to cursor */
start = (unsigned short *)(vc->vc_pos - (vc->vc_x << 1));
count = vc->vc_x + 1;
- if (DO_UPDATE(vc))
- vc->vc_sw->con_clear(vc, vc->vc_y, 0, 1,
- vc->vc_x + 1);
break;
case 2: /* erase whole line */
start = (unsigned short *)(vc->vc_pos - (vc->vc_x << 1));
count = vc->vc_cols;
- if (DO_UPDATE(vc))
- vc->vc_sw->con_clear(vc, vc->vc_y, 0, 1,
- vc->vc_cols);
break;
default:
return;
}
scr_memsetw(start, vc->vc_video_erase_char, 2 * count);
vc->vc_need_wrap = 0;
+ if (DO_UPDATE(vc))
+ do_update_region(vc, (unsigned long) start, count);
}
static void csi_X(struct vc_data *vc, int vpar) /* erase the following vpar positions */
@@ -1380,7 +1336,7 @@ static void respond_string(const char *p, struct tty_struct *tty)
tty_insert_flip_char(tty, *p, 0);
p++;
}
- con_schedule_flip(tty);
+ tty_schedule_flip(tty);
}
static void cursor_report(struct vc_data *vc, struct tty_struct *tty)
@@ -2792,41 +2748,52 @@ static void con_flush_chars(struct tty_struct *tty)
/*
* Allocate the console screen memory.
*/
-static int con_open(struct tty_struct *tty, struct file *filp)
+static int con_install(struct tty_driver *driver, struct tty_struct *tty)
{
unsigned int currcons = tty->index;
- int ret = 0;
+ struct vc_data *vc;
+ int ret;
console_lock();
- if (tty->driver_data == NULL) {
- ret = vc_allocate(currcons);
- if (ret == 0) {
- struct vc_data *vc = vc_cons[currcons].d;
+ ret = vc_allocate(currcons);
+ if (ret)
+ goto unlock;
- /* Still being freed */
- if (vc->port.tty) {
- console_unlock();
- return -ERESTARTSYS;
- }
- tty->driver_data = vc;
- vc->port.tty = tty;
+ vc = vc_cons[currcons].d;
- if (!tty->winsize.ws_row && !tty->winsize.ws_col) {
- tty->winsize.ws_row = vc_cons[currcons].d->vc_rows;
- tty->winsize.ws_col = vc_cons[currcons].d->vc_cols;
- }
- if (vc->vc_utf)
- tty->termios->c_iflag |= IUTF8;
- else
- tty->termios->c_iflag &= ~IUTF8;
- console_unlock();
- return ret;
- }
+ /* Still being freed */
+ if (vc->port.tty) {
+ ret = -ERESTARTSYS;
+ goto unlock;
}
+
+ ret = tty_port_install(&vc->port, driver, tty);
+ if (ret)
+ goto unlock;
+
+ tty->driver_data = vc;
+ vc->port.tty = tty;
+
+ if (!tty->winsize.ws_row && !tty->winsize.ws_col) {
+ tty->winsize.ws_row = vc_cons[currcons].d->vc_rows;
+ tty->winsize.ws_col = vc_cons[currcons].d->vc_cols;
+ }
+ if (vc->vc_utf)
+ tty->termios.c_iflag |= IUTF8;
+ else
+ tty->termios.c_iflag &= ~IUTF8;
+unlock:
console_unlock();
return ret;
}
+static int con_open(struct tty_struct *tty, struct file *filp)
+{
+ /* everything done in install */
+ return 0;
+}
+
+
static void con_close(struct tty_struct *tty, struct file *filp)
{
/* Nothing to do - we defer to shutdown */
@@ -2839,7 +2806,6 @@ static void con_shutdown(struct tty_struct *tty)
console_lock();
vc->port.tty = NULL;
console_unlock();
- tty_shutdown(tty);
}
static int default_italic_color = 2; // green (ASCII)
@@ -2947,6 +2913,7 @@ static int __init con_init(void)
console_initcall(con_init);
static const struct tty_operations con_ops = {
+ .install = con_install,
.open = con_open,
.close = con_close,
.write = con_write,
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index f763ed7ba91..ff7b5a8d501 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -826,7 +826,7 @@ static void acm_tty_set_termios(struct tty_struct *tty,
struct ktermios *termios_old)
{
struct acm *acm = tty->driver_data;
- struct ktermios *termios = tty->termios;
+ struct ktermios *termios = &tty->termios;
struct usb_cdc_line_coding newline;
int newctrl = acm->ctrlout;
@@ -1299,7 +1299,8 @@ skip_countries:
usb_set_intfdata(data_interface, acm);
usb_get_intf(control_interface);
- tty_register_device(acm_tty_driver, minor, &control_interface->dev);
+ tty_port_register_device(&acm->port, acm_tty_driver, minor,
+ &control_interface->dev);
return 0;
alloc_fail7:
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index 5b3f5fffea9..2b5534c2ab8 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -1129,7 +1129,8 @@ int gserial_setup(struct usb_gadget *g, unsigned count)
for (i = 0; i < count; i++) {
struct device *tty_dev;
- tty_dev = tty_register_device(gs_tty_driver, i, &g->dev);
+ tty_dev = tty_port_register_device(&ports[i].port->port,
+ gs_tty_driver, i, &g->dev);
if (IS_ERR(tty_dev))
pr_warning("%s: no classdev for port %d, err %ld\n",
__func__, i, PTR_ERR(tty_dev));
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index f8ce97d8b0a..3b98fb73336 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -215,7 +215,7 @@ static void ark3116_release(struct usb_serial *serial)
static void ark3116_init_termios(struct tty_struct *tty)
{
- struct ktermios *termios = tty->termios;
+ struct ktermios *termios = &tty->termios;
*termios = tty_std_termios;
termios->c_cflag = B9600 | CS8
| CREAD | HUPCL | CLOCAL;
@@ -229,7 +229,7 @@ static void ark3116_set_termios(struct tty_struct *tty,
{
struct usb_serial *serial = port->serial;
struct ark3116_private *priv = usb_get_serial_port_data(port);
- struct ktermios *termios = tty->termios;
+ struct ktermios *termios = &tty->termios;
unsigned int cflag = termios->c_cflag;
int bps = tty_get_baud_rate(tty);
int quot;
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index 6b736563295..a46df73ee96 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -307,7 +307,7 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
unsigned long control_state;
int bad_flow_control;
speed_t baud;
- struct ktermios *termios = tty->termios;
+ struct ktermios *termios = &tty->termios;
iflag = termios->c_iflag;
cflag = termios->c_cflag;
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index b9cca6dcde0..9a564286bfd 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -165,8 +165,8 @@ static int usb_console_setup(struct console *co, char *options)
}
if (serial->type->set_termios) {
- tty->termios->c_cflag = cflag;
- tty_termios_encode_baud_rate(tty->termios, baud, baud);
+ tty->termios.c_cflag = cflag;
+ tty_termios_encode_baud_rate(&tty->termios, baud, baud);
memset(&dummy, 0, sizeof(struct ktermios));
serial->type->set_termios(tty, port, &dummy);
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 1e71079ce33..ba5e07e188a 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -469,7 +469,7 @@ static void cp210x_get_termios(struct tty_struct *tty,
if (tty) {
cp210x_get_termios_port(tty->driver_data,
- &tty->termios->c_cflag, &baud);
+ &tty->termios.c_cflag, &baud);
tty_encode_baud_rate(tty, baud, baud);
}
@@ -631,7 +631,7 @@ static void cp210x_change_speed(struct tty_struct *tty,
{
u32 baud;
- baud = tty->termios->c_ospeed;
+ baud = tty->termios.c_ospeed;
/* This maps the requested rate to a rate valid on cp2102 or cp2103,
* or to an arbitrary rate in [1M,2M].
@@ -665,10 +665,10 @@ static void cp210x_set_termios(struct tty_struct *tty,
if (!tty)
return;
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
old_cflag = old_termios->c_cflag;
- if (tty->termios->c_ospeed != old_termios->c_ospeed)
+ if (tty->termios.c_ospeed != old_termios->c_ospeed)
cp210x_change_speed(tty, port, old_termios);
/* If the number of data bits is to be updated */
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index b78c34eb5d3..be34f153e56 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -922,38 +922,38 @@ static void cypress_set_termios(struct tty_struct *tty,
early enough */
if (!priv->termios_initialized) {
if (priv->chiptype == CT_EARTHMATE) {
- *(tty->termios) = tty_std_termios;
- tty->termios->c_cflag = B4800 | CS8 | CREAD | HUPCL |
+ tty->termios = tty_std_termios;
+ tty->termios.c_cflag = B4800 | CS8 | CREAD | HUPCL |
CLOCAL;
- tty->termios->c_ispeed = 4800;
- tty->termios->c_ospeed = 4800;
+ tty->termios.c_ispeed = 4800;
+ tty->termios.c_ospeed = 4800;
} else if (priv->chiptype == CT_CYPHIDCOM) {
- *(tty->termios) = tty_std_termios;
- tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
+ tty->termios = tty_std_termios;
+ tty->termios.c_cflag = B9600 | CS8 | CREAD | HUPCL |
CLOCAL;
- tty->termios->c_ispeed = 9600;
- tty->termios->c_ospeed = 9600;
+ tty->termios.c_ispeed = 9600;
+ tty->termios.c_ospeed = 9600;
} else if (priv->chiptype == CT_CA42V2) {
- *(tty->termios) = tty_std_termios;
- tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
+ tty->termios = tty_std_termios;
+ tty->termios.c_cflag = B9600 | CS8 | CREAD | HUPCL |
CLOCAL;
- tty->termios->c_ispeed = 9600;
- tty->termios->c_ospeed = 9600;
+ tty->termios.c_ispeed = 9600;
+ tty->termios.c_ospeed = 9600;
}
priv->termios_initialized = 1;
}
spin_unlock_irqrestore(&priv->lock, flags);
/* Unsupported features need clearing */
- tty->termios->c_cflag &= ~(CMSPAR|CRTSCTS);
+ tty->termios.c_cflag &= ~(CMSPAR|CRTSCTS);
- cflag = tty->termios->c_cflag;
- iflag = tty->termios->c_iflag;
+ cflag = tty->termios.c_cflag;
+ iflag = tty->termios.c_iflag;
/* check if there are new settings */
if (old_termios) {
spin_lock_irqsave(&priv->lock, flags);
- priv->tmp_termios = *(tty->termios);
+ priv->tmp_termios = tty->termios;
spin_unlock_irqrestore(&priv->lock, flags);
}
@@ -1021,7 +1021,7 @@ static void cypress_set_termios(struct tty_struct *tty,
"4800bps.");
/* define custom termios settings for NMEA protocol */
- tty->termios->c_iflag /* input modes - */
+ tty->termios.c_iflag /* input modes - */
&= ~(IGNBRK /* disable ignore break */
| BRKINT /* disable break causes interrupt */
| PARMRK /* disable mark parity errors */
@@ -1031,10 +1031,10 @@ static void cypress_set_termios(struct tty_struct *tty,
| ICRNL /* disable translate CR to NL */
| IXON); /* disable enable XON/XOFF flow control */
- tty->termios->c_oflag /* output modes */
+ tty->termios.c_oflag /* output modes */
&= ~OPOST; /* disable postprocess output char */
- tty->termios->c_lflag /* line discipline modes */
+ tty->termios.c_lflag /* line discipline modes */
&= ~(ECHO /* disable echo input characters */
| ECHONL /* disable echo new line */
| ICANON /* disable erase, kill, werase, and rprnt
@@ -1200,7 +1200,7 @@ static void cypress_read_int_callback(struct urb *urb)
/* hangup, as defined in acm.c... this might be a bad place for it
* though */
- if (tty && !(tty->termios->c_cflag & CLOCAL) &&
+ if (tty && !(tty->termios.c_cflag & CLOCAL) &&
!(priv->current_status & UART_CD)) {
dbg("%s - calling hangup", __func__);
tty_hangup(tty);
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index b5cd838093e..afd9d2ec577 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -687,8 +687,8 @@ static void digi_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
struct digi_port *priv = usb_get_serial_port_data(port);
- unsigned int iflag = tty->termios->c_iflag;
- unsigned int cflag = tty->termios->c_cflag;
+ unsigned int iflag = tty->termios.c_iflag;
+ unsigned int cflag = tty->termios.c_cflag;
unsigned int old_iflag = old_termios->c_iflag;
unsigned int old_cflag = old_termios->c_cflag;
unsigned char buf[32];
@@ -709,7 +709,7 @@ static void digi_set_termios(struct tty_struct *tty,
/* don't set RTS if using hardware flow control */
/* and throttling input */
modem_signals = TIOCM_DTR;
- if (!(tty->termios->c_cflag & CRTSCTS) ||
+ if (!(tty->termios.c_cflag & CRTSCTS) ||
!test_bit(TTY_THROTTLED, &tty->flags))
modem_signals |= TIOCM_RTS;
digi_set_modem_signals(port, modem_signals, 1);
@@ -748,7 +748,7 @@ static void digi_set_termios(struct tty_struct *tty,
}
}
/* set parity */
- tty->termios->c_cflag &= ~CMSPAR;
+ tty->termios.c_cflag &= ~CMSPAR;
if ((cflag&(PARENB|PARODD)) != (old_cflag&(PARENB|PARODD))) {
if (cflag&PARENB) {
@@ -1124,8 +1124,8 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port)
/* set termios settings */
if (tty) {
- not_termios.c_cflag = ~tty->termios->c_cflag;
- not_termios.c_iflag = ~tty->termios->c_iflag;
+ not_termios.c_cflag = ~tty->termios.c_cflag;
+ not_termios.c_iflag = ~tty->termios.c_iflag;
digi_set_termios(tty, port, &not_termios);
}
return 0;
@@ -1500,7 +1500,7 @@ static int digi_read_oob_callback(struct urb *urb)
rts = 0;
if (tty)
- rts = tty->termios->c_cflag & CRTSCTS;
+ rts = tty->termios.c_cflag & CRTSCTS;
if (tty && opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
spin_lock(&priv->dp_port_lock);
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index cdf61dd0731..34e86383090 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -87,7 +87,7 @@ static int empeg_startup(struct usb_serial *serial)
static void empeg_init_termios(struct tty_struct *tty)
{
- struct ktermios *termios = tty->termios;
+ struct ktermios *termios = &tty->termios;
/*
* The empeg-car player wants these particular tty settings.
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 499b15fd82f..79451ee12ca 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -173,10 +173,11 @@ static void f81232_set_termios(struct tty_struct *tty,
/* FIXME - Stubbed out for now */
/* Don't change anything if nothing has changed */
- if (!tty_termios_hw_change(tty->termios, old_termios))
+ if (!tty_termios_hw_change(&tty->termios, old_termios))
return;
/* Do the real work here... */
+ tty_termios_copy_hw(&tty->termios, old_termios);
}
static int f81232_tiocmget(struct tty_struct *tty)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 5620db6469e..24e3e19849a 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -2082,7 +2082,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
{
struct usb_device *dev = port->serial->dev;
struct ftdi_private *priv = usb_get_serial_port_data(port);
- struct ktermios *termios = tty->termios;
+ struct ktermios *termios = &tty->termios;
unsigned int cflag = termios->c_cflag;
__u16 urb_value; /* will hold the new flags */
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index e1f5ccd1e8f..f435575c4e6 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -1458,7 +1458,7 @@ static void edge_throttle(struct tty_struct *tty)
}
/* if we are implementing RTS/CTS, toggle that line */
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
edge_port->shadowMCR &= ~MCR_RTS;
status = send_cmd_write_uart_register(edge_port, MCR,
edge_port->shadowMCR);
@@ -1497,7 +1497,7 @@ static void edge_unthrottle(struct tty_struct *tty)
return;
}
/* if we are implementing RTS/CTS, toggle that line */
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
edge_port->shadowMCR |= MCR_RTS;
send_cmd_write_uart_register(edge_port, MCR,
edge_port->shadowMCR);
@@ -1516,9 +1516,9 @@ static void edge_set_termios(struct tty_struct *tty,
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
unsigned int cflag;
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
dbg("%s - clfag %08x iflag %08x", __func__,
- tty->termios->c_cflag, tty->termios->c_iflag);
+ tty->termios.c_cflag, tty->termios.c_iflag);
dbg("%s - old clfag %08x old iflag %08x", __func__,
old_termios->c_cflag, old_termios->c_iflag);
@@ -1987,7 +1987,7 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial,
tty = tty_port_tty_get(&edge_port->port->port);
if (tty) {
change_port_settings(tty,
- edge_port, tty->termios);
+ edge_port, &tty->termios);
tty_kref_put(tty);
}
@@ -2570,7 +2570,7 @@ static void change_port_settings(struct tty_struct *tty,
return;
}
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
switch (cflag & CSIZE) {
case CS5:
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 3936904c641..765978ae752 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -1870,7 +1870,7 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
/* set up the port settings */
if (tty)
- edge_set_termios(tty, port, tty->termios);
+ edge_set_termios(tty, port, &tty->termios);
/* open up the port */
@@ -2272,13 +2272,13 @@ static void change_port_settings(struct tty_struct *tty,
config = kmalloc (sizeof (*config), GFP_KERNEL);
if (!config) {
- *tty->termios = *old_termios;
+ tty->termios = *old_termios;
dev_err(&edge_port->port->dev, "%s - out of memory\n",
__func__);
return;
}
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
config->wFlags = 0;
@@ -2362,7 +2362,7 @@ static void change_port_settings(struct tty_struct *tty,
} else
dbg("%s - OUTBOUND XON/XOFF is disabled", __func__);
- tty->termios->c_cflag &= ~CMSPAR;
+ tty->termios.c_cflag &= ~CMSPAR;
/* Round the baud rate */
baud = tty_get_baud_rate(tty);
@@ -2408,10 +2408,10 @@ static void edge_set_termios(struct tty_struct *tty,
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
unsigned int cflag;
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
dbg("%s - clfag %08x iflag %08x", __func__,
- tty->termios->c_cflag, tty->termios->c_iflag);
+ tty->termios.c_cflag, tty->termios.c_iflag);
dbg("%s - old clfag %08x old iflag %08x", __func__,
old_termios->c_cflag, old_termios->c_iflag);
dbg("%s - port %d", __func__, port->number);
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index fc09414c960..5a96692b12a 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -381,7 +381,7 @@ static void ir_set_termios(struct tty_struct *tty,
ir_xbof = ir_xbof_change(xbof) ;
/* Only speed changes are supported */
- tty_termios_copy_hw(tty->termios, old_termios);
+ tty_termios_copy_hw(&tty->termios, old_termios);
tty_encode_baud_rate(tty, baud, baud);
/*
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 22b1eb5040b..bf3864045c1 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -921,7 +921,7 @@ static void iuu_set_termios(struct tty_struct *tty,
{
const u32 supported_mask = CMSPAR|PARENB|PARODD;
struct iuu_private *priv = usb_get_serial_port_data(port);
- unsigned int cflag = tty->termios->c_cflag;
+ unsigned int cflag = tty->termios.c_cflag;
int status;
u32 actual;
u32 parity;
@@ -930,7 +930,7 @@ static void iuu_set_termios(struct tty_struct *tty,
u32 newval = cflag & supported_mask;
/* Just use the ospeed. ispeed should be the same. */
- baud = tty->termios->c_ospeed;
+ baud = tty->termios.c_ospeed;
dbg("%s - enter c_ospeed or baud=%d", __func__, baud);
@@ -961,13 +961,13 @@ static void iuu_set_termios(struct tty_struct *tty,
* settings back over and then adjust them
*/
if (old_termios)
- tty_termios_copy_hw(tty->termios, old_termios);
+ tty_termios_copy_hw(&tty->termios, old_termios);
if (status != 0) /* Set failed - return old bits */
return;
/* Re-encode speed, parity and csize */
tty_encode_baud_rate(tty, baud, baud);
- tty->termios->c_cflag &= ~(supported_mask|CSIZE);
- tty->termios->c_cflag |= newval | csize;
+ tty->termios.c_cflag &= ~(supported_mask|CSIZE);
+ tty->termios.c_cflag |= newval | csize;
}
static void iuu_close(struct usb_serial_port *port)
@@ -993,14 +993,14 @@ static void iuu_close(struct usb_serial_port *port)
static void iuu_init_termios(struct tty_struct *tty)
{
- *(tty->termios) = tty_std_termios;
- tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600
+ tty->termios = tty_std_termios;
+ tty->termios.c_cflag = CLOCAL | CREAD | CS8 | B9600
| TIOCM_CTS | CSTOPB | PARENB;
- tty->termios->c_ispeed = 9600;
- tty->termios->c_ospeed = 9600;
- tty->termios->c_lflag = 0;
- tty->termios->c_oflag = 0;
- tty->termios->c_iflag = 0;
+ tty->termios.c_ispeed = 9600;
+ tty->termios.c_ospeed = 9600;
+ tty->termios.c_lflag = 0;
+ tty->termios.c_oflag = 0;
+ tty->termios.c_iflag = 0;
}
static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port)
@@ -1012,8 +1012,8 @@ static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port)
u32 actual;
struct iuu_private *priv = usb_get_serial_port_data(port);
- baud = tty->termios->c_ospeed;
- tty->termios->c_ispeed = baud;
+ baud = tty->termios.c_ospeed;
+ tty->termios.c_ispeed = baud;
/* Re-encode speed */
tty_encode_baud_rate(tty, baud, baud);
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index af0b70eaf03..7bcbb47e144 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -158,7 +158,7 @@ static void keyspan_set_termios(struct tty_struct *tty,
p_priv = usb_get_serial_port_data(port);
d_details = p_priv->device_details;
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
device_port = port->number - port->serial->minor;
/* Baud rate calculation takes baud rate as an integer
@@ -179,7 +179,7 @@ static void keyspan_set_termios(struct tty_struct *tty,
p_priv->flow_control = (cflag & CRTSCTS) ? flow_cts : flow_none;
/* Mark/Space not supported */
- tty->termios->c_cflag &= ~CMSPAR;
+ tty->termios.c_cflag &= ~CMSPAR;
keyspan_send_setup(port, 0);
}
@@ -1086,7 +1086,7 @@ static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port)
device_port = port->number - port->serial->minor;
if (tty) {
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
/* Baud rate calculation takes baud rate as an integer
so other rates can be generated if desired. */
baud_rate = tty_get_baud_rate(tty);
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index a4ac3cfeffc..dcada8615fc 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -338,7 +338,7 @@ static void keyspan_pda_set_termios(struct tty_struct *tty,
7[EOMS]1: 10 bit, b0/b7 is parity
7[EOMS]2: 11 bit, b0/b7 is parity, extra bit always (mark?)
- HW flow control is dictated by the tty->termios->c_cflags & CRTSCTS
+ HW flow control is dictated by the tty->termios.c_cflags & CRTSCTS
bit.
For now, just do baud. */
@@ -353,7 +353,7 @@ static void keyspan_pda_set_termios(struct tty_struct *tty,
}
/* Only speed can change so copy the old h/w parameters
then encode the new speed */
- tty_termios_copy_hw(tty->termios, old_termios);
+ tty_termios_copy_hw(&tty->termios, old_termios);
tty_encode_baud_rate(tty, speed, speed);
}
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 5bed59cd577..def9ad25871 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -311,12 +311,12 @@ static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
/* set up termios structure */
spin_lock_irqsave(&priv->lock, flags);
- priv->termios.c_iflag = tty->termios->c_iflag;
- priv->termios.c_oflag = tty->termios->c_oflag;
- priv->termios.c_cflag = tty->termios->c_cflag;
- priv->termios.c_lflag = tty->termios->c_lflag;
+ priv->termios.c_iflag = tty->termios.c_iflag;
+ priv->termios.c_oflag = tty->termios.c_oflag;
+ priv->termios.c_cflag = tty->termios.c_cflag;
+ priv->termios.c_lflag = tty->termios.c_lflag;
for (i = 0; i < NCCS; i++)
- priv->termios.c_cc[i] = tty->termios->c_cc[i];
+ priv->termios.c_cc[i] = tty->termios.c_cc[i];
priv->cfg.pktlen = cfg->pktlen;
priv->cfg.baudrate = cfg->baudrate;
priv->cfg.databits = cfg->databits;
@@ -445,9 +445,9 @@ static void klsi_105_set_termios(struct tty_struct *tty,
struct ktermios *old_termios)
{
struct klsi_105_private *priv = usb_get_serial_port_data(port);
- unsigned int iflag = tty->termios->c_iflag;
+ unsigned int iflag = tty->termios.c_iflag;
unsigned int old_iflag = old_termios->c_iflag;
- unsigned int cflag = tty->termios->c_cflag;
+ unsigned int cflag = tty->termios.c_cflag;
unsigned int old_cflag = old_termios->c_cflag;
struct klsi_105_port_settings *cfg;
unsigned long flags;
@@ -560,7 +560,7 @@ static void klsi_105_set_termios(struct tty_struct *tty,
if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))
|| (cflag & CSTOPB) != (old_cflag & CSTOPB)) {
/* Not currently supported */
- tty->termios->c_cflag &= ~(PARENB|PARODD|CSTOPB);
+ tty->termios.c_cflag &= ~(PARENB|PARODD|CSTOPB);
#if 0
priv->last_lcr = 0;
@@ -587,7 +587,7 @@ static void klsi_105_set_termios(struct tty_struct *tty,
|| (iflag & IXON) != (old_iflag & IXON)
|| (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
/* Not currently supported */
- tty->termios->c_cflag &= ~CRTSCTS;
+ tty->termios.c_cflag &= ~CRTSCTS;
/* Drop DTR/RTS if no flow control otherwise assert */
#if 0
if ((iflag & IXOFF) || (iflag & IXON) || (cflag & CRTSCTS))
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index fafeabb64c5..bf5c74965d3 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -191,11 +191,11 @@ static void kobil_release(struct usb_serial *serial)
static void kobil_init_termios(struct tty_struct *tty)
{
/* Default to echo off and other sane device settings */
- tty->termios->c_lflag = 0;
- tty->termios->c_lflag &= ~(ISIG | ICANON | ECHO | IEXTEN | XCASE);
- tty->termios->c_iflag = IGNBRK | IGNPAR | IXOFF;
+ tty->termios.c_lflag = 0;
+ tty->termios.c_iflag &= ~(ISIG | ICANON | ECHO | IEXTEN | XCASE);
+ tty->termios.c_iflag |= IGNBRK | IGNPAR | IXOFF;
/* do NOT translate CR to CR-NL (0x0A -> 0x0A 0x0D) */
- tty->termios->c_oflag &= ~ONLCR;
+ tty->termios.c_oflag &= ~ONLCR;
}
static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port)
@@ -581,14 +581,14 @@ static void kobil_set_termios(struct tty_struct *tty,
struct kobil_private *priv;
int result;
unsigned short urb_val = 0;
- int c_cflag = tty->termios->c_cflag;
+ int c_cflag = tty->termios.c_cflag;
speed_t speed;
priv = usb_get_serial_port_data(port);
if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID ||
priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID) {
/* This device doesn't support ioctl calls */
- *tty->termios = *old;
+ tty_termios_copy_hw(&tty->termios, old);
return;
}
@@ -612,7 +612,7 @@ static void kobil_set_termios(struct tty_struct *tty,
urb_val |= SUSBCR_SPASB_EvenParity;
} else
urb_val |= SUSBCR_SPASB_NoParity;
- tty->termios->c_cflag &= ~CMSPAR;
+ tty->termios.c_cflag &= ~CMSPAR;
tty_encode_baud_rate(tty, speed, speed);
result = usb_control_msg(port->serial->dev,
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index a71fa0aa040..df98cffdba6 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -454,7 +454,7 @@ static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port)
* either.
*/
spin_lock_irqsave(&priv->lock, flags);
- if (tty && (tty->termios->c_cflag & CBAUD))
+ if (tty && (tty->termios.c_cflag & CBAUD))
priv->control_state = TIOCM_DTR | TIOCM_RTS;
else
priv->control_state = 0;
@@ -634,7 +634,7 @@ static void mct_u232_set_termios(struct tty_struct *tty,
{
struct usb_serial *serial = port->serial;
struct mct_u232_private *priv = usb_get_serial_port_data(port);
- struct ktermios *termios = tty->termios;
+ struct ktermios *termios = &tty->termios;
unsigned int cflag = termios->c_cflag;
unsigned int old_cflag = old_termios->c_cflag;
unsigned long flags;
diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c
index d47eb06fe46..2b0627b5fe2 100644
--- a/drivers/usb/serial/metro-usb.c
+++ b/drivers/usb/serial/metro-usb.c
@@ -130,12 +130,6 @@ static void metrousb_read_int_callback(struct urb *urb)
/* Set the data read from the usb port into the serial port buffer. */
tty = tty_port_tty_get(&port->port);
- if (!tty) {
- dev_err(&port->dev, "%s - bad tty pointer - exiting\n",
- __func__);
- return;
- }
-
if (tty && urb->actual_length) {
/* Loop through the data copying each byte to the tty layer. */
tty_insert_flip_string(tty, data, urb->actual_length);
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index a07dd3c8cfe..012f67b2e4c 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -1349,7 +1349,7 @@ static void mos7720_throttle(struct tty_struct *tty)
}
/* if we are implementing RTS/CTS, toggle that line */
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
mos7720_port->shadowMCR &= ~UART_MCR_RTS;
write_mos_reg(port->serial, port->number - port->serial->minor,
MCR, mos7720_port->shadowMCR);
@@ -1383,7 +1383,7 @@ static void mos7720_unthrottle(struct tty_struct *tty)
}
/* if we are implementing RTS/CTS, toggle that line */
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
mos7720_port->shadowMCR |= UART_MCR_RTS;
write_mos_reg(port->serial, port->number - port->serial->minor,
MCR, mos7720_port->shadowMCR);
@@ -1604,8 +1604,8 @@ static void change_port_settings(struct tty_struct *tty,
lStop = 0x00; /* 1 stop bit */
lParity = 0x00; /* No parity */
- cflag = tty->termios->c_cflag;
- iflag = tty->termios->c_iflag;
+ cflag = tty->termios.c_cflag;
+ iflag = tty->termios.c_iflag;
/* Change the number of bits */
switch (cflag & CSIZE) {
@@ -1753,11 +1753,11 @@ static void mos7720_set_termios(struct tty_struct *tty,
dbg("%s\n", "setting termios - ASPIRE");
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
dbg("%s - cflag %08x iflag %08x", __func__,
- tty->termios->c_cflag,
- RELEVANT_IFLAG(tty->termios->c_iflag));
+ tty->termios.c_cflag,
+ RELEVANT_IFLAG(tty->termios.c_iflag));
dbg("%s - old cflag %08x old iflag %08x", __func__,
old_termios->c_cflag,
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 2f6da1e89bf..402c32d7acc 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1651,7 +1651,7 @@ static void mos7840_throttle(struct tty_struct *tty)
return;
}
/* if we are implementing RTS/CTS, toggle that line */
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
mos7840_port->shadowMCR &= ~MCR_RTS;
status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
mos7840_port->shadowMCR);
@@ -1694,7 +1694,7 @@ static void mos7840_unthrottle(struct tty_struct *tty)
}
/* if we are implementing RTS/CTS, toggle that line */
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
mos7840_port->shadowMCR |= MCR_RTS;
status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
mos7840_port->shadowMCR);
@@ -2000,8 +2000,8 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
lStop = LCR_STOP_1;
lParity = LCR_PAR_NONE;
- cflag = tty->termios->c_cflag;
- iflag = tty->termios->c_iflag;
+ cflag = tty->termios.c_cflag;
+ iflag = tty->termios.c_iflag;
/* Change the number of bits */
if (cflag & CSIZE) {
@@ -2161,10 +2161,10 @@ static void mos7840_set_termios(struct tty_struct *tty,
dbg("%s", "setting termios - ");
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
dbg("%s - clfag %08x iflag %08x", __func__,
- tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag));
+ tty->termios.c_cflag, RELEVANT_IFLAG(tty->termios.c_iflag));
dbg("%s - old clfag %08x old iflag %08x", __func__,
old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag));
dbg("%s - port %d", __func__, port->number);
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index 5976b65ab6e..9f555560bfb 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -404,10 +404,10 @@ static int oti6858_chars_in_buffer(struct tty_struct *tty)
static void oti6858_init_termios(struct tty_struct *tty)
{
- *(tty->termios) = tty_std_termios;
- tty->termios->c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL;
- tty->termios->c_ispeed = 38400;
- tty->termios->c_ospeed = 38400;
+ tty->termios = tty_std_termios;
+ tty->termios.c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL;
+ tty->termios.c_ispeed = 38400;
+ tty->termios.c_ospeed = 38400;
}
static void oti6858_set_termios(struct tty_struct *tty,
@@ -425,7 +425,7 @@ static void oti6858_set_termios(struct tty_struct *tty,
return;
}
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
spin_lock_irqsave(&priv->lock, flags);
divisor = priv->pending_setup.divisor;
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 13b8dd6481f..2b9108a8ea6 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -260,16 +260,16 @@ static void pl2303_set_termios(struct tty_struct *tty,
serial settings even to the same values as before. Thus
we actually need to filter in this specific case */
- if (!tty_termios_hw_change(tty->termios, old_termios))
+ if (!tty_termios_hw_change(&tty->termios, old_termios))
return;
- cflag = tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
buf = kzalloc(7, GFP_KERNEL);
if (!buf) {
dev_err(&port->dev, "%s - out of memory.\n", __func__);
/* Report back no change occurred */
- *tty->termios = *old_termios;
+ tty->termios = *old_termios;
return;
}
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index 151670b6b72..7df9cdb053e 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -275,7 +275,7 @@ static void qt2_set_termios(struct tty_struct *tty,
{
struct usb_device *dev = port->serial->dev;
struct qt2_port_private *port_priv;
- struct ktermios *termios = tty->termios;
+ struct ktermios *termios = &tty->termios;
u16 baud;
unsigned int cflag = termios->c_cflag;
u16 new_lcr = 0;
@@ -406,7 +406,7 @@ static int qt2_open(struct tty_struct *tty, struct usb_serial_port *port)
port_priv->device_port = (u8) device_port;
if (tty)
- qt2_set_termios(tty, port, tty->termios);
+ qt2_set_termios(tty, port, &tty->termios);
return 0;
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 0274710cced..b14ebbd7356 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -382,7 +382,7 @@ static int sierra_send_setup(struct usb_serial_port *port)
static void sierra_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
- tty_termios_copy_hw(tty->termios, old_termios);
+ tty_termios_copy_hw(&tty->termios, old_termios);
sierra_send_setup(port);
}
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index cad60898471..ab68a4d74d6 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -316,10 +316,10 @@ static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on)
static void spcp8x5_init_termios(struct tty_struct *tty)
{
/* for the 1st time call this function */
- *(tty->termios) = tty_std_termios;
- tty->termios->c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
- tty->termios->c_ispeed = 115200;
- tty->termios->c_ospeed = 115200;
+ tty->termios = tty_std_termios;
+ tty->termios.c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
+ tty->termios.c_ispeed = 115200;
+ tty->termios.c_ospeed = 115200;
}
/* set the serial param for transfer. we should check if we really need to
@@ -330,7 +330,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
struct usb_serial *serial = port->serial;
struct spcp8x5_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
- unsigned int cflag = tty->termios->c_cflag;
+ unsigned int cflag = tty->termios.c_cflag;
unsigned int old_cflag = old_termios->c_cflag;
unsigned short uartdata;
unsigned char buf[2] = {0, 0};
@@ -340,7 +340,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
/* check that they really want us to change something */
- if (!tty_termios_hw_change(tty->termios, old_termios))
+ if (!tty_termios_hw_change(&tty->termios, old_termios))
return;
/* set DTR/RTS active */
diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c
index 3fee23bf0c1..cf2d30cf758 100644
--- a/drivers/usb/serial/ssu100.c
+++ b/drivers/usb/serial/ssu100.c
@@ -216,7 +216,7 @@ static void ssu100_set_termios(struct tty_struct *tty,
struct ktermios *old_termios)
{
struct usb_device *dev = port->serial->dev;
- struct ktermios *termios = tty->termios;
+ struct ktermios *termios = &tty->termios;
u16 baud, divisor, remainder;
unsigned int cflag = termios->c_cflag;
u16 urb_value = 0; /* will hold the new flags */
@@ -322,7 +322,7 @@ static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port)
dbg("%s - set uart failed", __func__);
if (tty)
- ssu100_set_termios(tty, port, tty->termios);
+ ssu100_set_termios(tty, port, &tty->termios);
return usb_serial_generic_open(tty, port);
}
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index a4404f5ad68..f502a16aac2 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -520,7 +520,7 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
}
if (tty)
- ti_set_termios(tty, port, tty->termios);
+ ti_set_termios(tty, port, &tty->termios);
dbg("%s - sending TI_OPEN_PORT", __func__);
status = ti_command_out_sync(tdev, TI_OPEN_PORT,
@@ -562,7 +562,7 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
usb_clear_halt(dev, port->read_urb->pipe);
if (tty)
- ti_set_termios(tty, port, tty->termios);
+ ti_set_termios(tty, port, &tty->termios);
dbg("%s - sending TI_OPEN_PORT (2)", __func__);
status = ti_command_out_sync(tdev, TI_OPEN_PORT,
@@ -831,8 +831,8 @@ static void ti_set_termios(struct tty_struct *tty,
int port_number = port->number - port->serial->minor;
unsigned int mcr;
- cflag = tty->termios->c_cflag;
- iflag = tty->termios->c_iflag;
+ cflag = tty->termios.c_cflag;
+ iflag = tty->termios.c_iflag;
dbg("%s - cflag %08x, iflag %08x", __func__, cflag, iflag);
dbg("%s - old clfag %08x, old iflag %08x", __func__,
@@ -871,7 +871,7 @@ static void ti_set_termios(struct tty_struct *tty,
}
/* CMSPAR isn't supported by this driver */
- tty->termios->c_cflag &= ~CMSPAR;
+ tty->termios.c_cflag &= ~CMSPAR;
if (cflag & PARENB) {
if (cflag & PARODD) {
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 27483f91a4a..aa4b0d77599 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -207,7 +207,7 @@ static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
if (retval)
goto error_get_interface;
- retval = tty_standard_install(driver, tty);
+ retval = tty_port_install(&port->port, driver, tty);
if (retval)
goto error_init_termios;
@@ -305,8 +305,7 @@ static void serial_close(struct tty_struct *tty, struct file *filp)
* Do the resource freeing and refcount dropping for the port.
* Avoid freeing the console.
*
- * Called asynchronously after the last tty kref is dropped,
- * and the tty layer has already done the tty_shutdown(tty);
+ * Called asynchronously after the last tty kref is dropped.
*/
static void serial_cleanup(struct tty_struct *tty)
{
@@ -423,7 +422,7 @@ static void serial_set_termios(struct tty_struct *tty, struct ktermios *old)
if (port->serial->type->set_termios)
port->serial->type->set_termios(tty, port, old);
else
- tty_termios_copy_hw(tty->termios, old);
+ tty_termios_copy_hw(&tty->termios, old);
}
static int serial_break(struct tty_struct *tty, int break_state)
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index 6855d5ed033..72b678d9083 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -67,7 +67,7 @@ void usb_wwan_set_termios(struct tty_struct *tty,
struct usb_wwan_intf_private *intfdata = port->serial->private;
/* Doesn't support option setting */
- tty_termios_copy_hw(tty->termios, old_termios);
+ tty_termios_copy_hw(&tty->termios, old_termios);
if (intfdata->send_setup)
intfdata->send_setup(port);
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 473635e7f5d..b36077de72b 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -724,7 +724,7 @@ static void firm_setup_port(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct whiteheat_port_settings port_settings;
- unsigned int cflag = tty->termios->c_cflag;
+ unsigned int cflag = tty->termios.c_cflag;
port_settings.port = port->number + 1;
diff --git a/drivers/video/auo_k190x.c b/drivers/video/auo_k190x.c
index 77da6a2f43d..c03ecdd31e4 100644
--- a/drivers/video/auo_k190x.c
+++ b/drivers/video/auo_k190x.c
@@ -987,7 +987,6 @@ err_regfb:
fb_dealloc_cmap(&info->cmap);
err_cmap:
fb_deferred_io_cleanup(info);
- kfree(info->fbdefio);
err_defio:
vfree((void *)info->screen_base);
err_irq:
@@ -1022,7 +1021,6 @@ int __devexit auok190x_common_remove(struct platform_device *pdev)
fb_dealloc_cmap(&info->cmap);
fb_deferred_io_cleanup(info);
- kfree(info->fbdefio);
vfree((void *)info->screen_base);
diff --git a/drivers/video/backlight/omap1_bl.c b/drivers/video/backlight/omap1_bl.c
index bfdc5fbeaa1..92257ef1940 100644
--- a/drivers/video/backlight/omap1_bl.c
+++ b/drivers/video/backlight/omap1_bl.c
@@ -27,9 +27,9 @@
#include <linux/fb.h>
#include <linux/backlight.h>
#include <linux/slab.h>
+#include <linux/platform_data/omap1_bl.h>
#include <mach/hardware.h>
-#include <plat/board.h>
#include <plat/mux.h>
#define OMAPBL_MAX_INTENSITY 0xff
diff --git a/drivers/video/console/bitblit.c b/drivers/video/console/bitblit.c
index 28b1a834906..61b182bf32a 100644
--- a/drivers/video/console/bitblit.c
+++ b/drivers/video/console/bitblit.c
@@ -162,7 +162,7 @@ static void bit_putcs(struct vc_data *vc, struct fb_info *info,
image.depth = 1;
if (attribute) {
- buf = kmalloc(cellsize, GFP_KERNEL);
+ buf = kmalloc(cellsize, GFP_ATOMIC);
if (!buf)
return;
}
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index 88e92041d8f..fdefa8fd72c 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -449,7 +449,7 @@ static int __init fb_console_setup(char *this_opt)
while ((options = strsep(&this_opt, ",")) != NULL) {
if (!strncmp(options, "font:", 5))
- strcpy(fontname, options + 5);
+ strlcpy(fontname, options + 5, sizeof(fontname));
if (!strncmp(options, "scrollback:", 11)) {
options += 11;
diff --git a/drivers/video/mb862xx/mb862xxfbdrv.c b/drivers/video/mb862xx/mb862xxfbdrv.c
index 00ce1f34b49..57d940be5f3 100644
--- a/drivers/video/mb862xx/mb862xxfbdrv.c
+++ b/drivers/video/mb862xx/mb862xxfbdrv.c
@@ -328,6 +328,8 @@ static int mb862xxfb_ioctl(struct fb_info *fbi, unsigned int cmd,
case MB862XX_L1_SET_CFG:
if (copy_from_user(l1_cfg, argp, sizeof(*l1_cfg)))
return -EFAULT;
+ if (l1_cfg->dh == 0 || l1_cfg->dw == 0)
+ return -EINVAL;
if ((l1_cfg->sw >= l1_cfg->dw) && (l1_cfg->sh >= l1_cfg->dh)) {
/* downscaling */
outreg(cap, GC_CAP_CSC,
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 5b289c5f695..ee9e29639dc 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -37,6 +37,7 @@
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
+#include <plat/cpu.h>
#include <plat/clock.h>
#include <video/omapdss.h>
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index 5d31699fbd3..f43bfe17b3b 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -105,6 +105,20 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
sdi_config_lcd_manager(dssdev);
+ /*
+ * LCLK and PCLK divisors are located in shadow registers, and we
+ * normally write them to DISPC registers when enabling the output.
+ * However, SDI uses pck-free as source clock for its PLL, and pck-free
+ * is affected by the divisors. And as we need the PLL before enabling
+ * the output, we need to write the divisors early.
+ *
+ * It seems just writing to the DISPC register is enough, and we don't
+ * need to care about the shadow register mechanism for pck-free. The
+ * exact reason for this is unknown.
+ */
+ dispc_mgr_set_clock_div(dssdev->manager->id,
+ &sdi.mgr_config.clock_info);
+
dss_sdi_init(dssdev->phy.sdi.datapairs);
r = dss_sdi_enable();
if (r)
diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index 08ec1a7103f..3c39aa8de92 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -31,6 +31,7 @@
#include <linux/omapfb.h>
#include <video/omapdss.h>
+#include <plat/cpu.h>
#include <plat/vram.h>
#include <plat/vrfb.h>
@@ -1192,7 +1193,7 @@ static int _setcolreg(struct fb_info *fbi, u_int regno, u_int red, u_int green,
break;
if (regno < 16) {
- u16 pal;
+ u32 pal;
pal = ((red >> (16 - var->red.length)) <<
var->red.offset) |
((green >> (16 - var->green.length)) <<
diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
index 4b0fcf3c2d0..fee195a7694 100644
--- a/drivers/w1/masters/omap_hdq.c
+++ b/drivers/w1/masters/omap_hdq.c
@@ -19,7 +19,6 @@
#include <linux/pm_runtime.h>
#include <asm/irq.h>
-#include <mach/hardware.h>
#include "../w1.h"
#include "../w1_int.h"
@@ -644,7 +643,7 @@ static int omap_hdq_remove(struct platform_device *pdev)
/* remove module dependency */
pm_runtime_disable(&pdev->dev);
- free_irq(INT_24XX_HDQ_IRQ, hdq_data);
+ free_irq(platform_get_irq(pdev, 0), hdq_data);
platform_set_drvdata(pdev, NULL);
iounmap(hdq_data->hdq_base);
kfree(hdq_data);
diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c
index fceec4f4eb7..f5db18dbc0f 100644
--- a/drivers/watchdog/omap_wdt.c
+++ b/drivers/watchdog/omap_wdt.c
@@ -46,6 +46,7 @@
#include <linux/slab.h>
#include <linux/pm_runtime.h>
#include <mach/hardware.h>
+#include <plat/cpu.h>
#include <plat/prcm.h>
#include "omap_wdt.h"
@@ -218,12 +219,16 @@ static long omap_wdt_ioctl(struct file *file, unsigned int cmd,
case WDIOC_GETSTATUS:
return put_user(0, (int __user *)arg);
case WDIOC_GETBOOTSTATUS:
+#ifdef CONFIG_ARCH_OMAP1
if (cpu_is_omap16xx())
return put_user(__raw_readw(ARM_SYSST),
(int __user *)arg);
+#endif
+#ifdef CONFIG_ARCH_OMAP2PLUS
if (cpu_is_omap24xx())
return put_user(omap_prcm_get_reset_sources(),
(int __user *)arg);
+#endif
return put_user(0, (int __user *)arg);
case WDIOC_KEEPALIVE:
spin_lock(&wdt_lock);
diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c
index 1afb4fba11b..4d519488d30 100644
--- a/drivers/xen/swiotlb-xen.c
+++ b/drivers/xen/swiotlb-xen.c
@@ -232,7 +232,7 @@ xen_swiotlb_alloc_coherent(struct device *hwdev, size_t size,
return ret;
if (hwdev && hwdev->coherent_dma_mask)
- dma_mask = hwdev->coherent_dma_mask;
+ dma_mask = dma_alloc_coherent_mask(hwdev, flags);
phys = virt_to_phys(ret);
dev_addr = xen_phys_to_bus(phys);
diff --git a/drivers/xen/xen-pciback/pci_stub.c b/drivers/xen/xen-pciback/pci_stub.c
index 097e536e867..03342728bf2 100644
--- a/drivers/xen/xen-pciback/pci_stub.c
+++ b/drivers/xen/xen-pciback/pci_stub.c
@@ -353,16 +353,16 @@ static int __devinit pcistub_init_device(struct pci_dev *dev)
if (err)
goto config_release;
- dev_dbg(&dev->dev, "reseting (FLR, D3, etc) the device\n");
- __pci_reset_function_locked(dev);
-
/* We need the device active to save the state. */
dev_dbg(&dev->dev, "save state of device\n");
pci_save_state(dev);
dev_data->pci_saved_state = pci_store_saved_state(dev);
if (!dev_data->pci_saved_state)
dev_err(&dev->dev, "Could not store PCI conf saved state!\n");
-
+ else {
+ dev_dbg(&dev->dev, "reseting (FLR, D3, etc) the device\n");
+ __pci_reset_function_locked(dev);
+ }
/* Now disable the device (this also ensures some private device
* data is setup before we export)
*/
diff --git a/firmware/Makefile b/firmware/Makefile
index 344713b1166..fdc9ff045ef 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -40,7 +40,6 @@ fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-6.2.1a.fw \
bnx2/bnx2-mips-06-6.2.1.fw \
bnx2/bnx2-rv2p-06-6.0.15.fw
fw-shipped-$(CONFIG_CASSINI) += sun/cassini.bin
-fw-shipped-$(CONFIG_COMPUTONE) += intelliport2.bin
fw-shipped-$(CONFIG_CHELSIO_T3) += cxgb3/t3b_psram-1.1.0.bin \
cxgb3/t3c_psram-1.1.0.bin \
cxgb3/t3fw-7.10.0.bin \
diff --git a/firmware/intelliport2.bin.ihex b/firmware/intelliport2.bin.ihex
deleted file mode 100644
index e9cfe8cb2b2..00000000000
--- a/firmware/intelliport2.bin.ihex
+++ /dev/null
@@ -1,2147 +0,0 @@
-:100000003C4237180201030000000000000000001D
-:10001000576564204465632030312031323A3234F0
-:100020003A33302031393939000000000000000037
-:10003000E96C0F426547694E6E496E47206F462056
-:10004000634F6445CC135A15E8167618041A921BB0
-:10005000201DAE1E3C20CA215823E6247426022807
-:1000600090291E2BAC2C3A2EC82F5631E432723414
-:1000700000368E371C39AA3A383CC63D543FE24020
-:100080007042FE438C451A47A848364AC44B524D2D
-:10009000E04E6E50FC518A531855A6563458C2593A
-:1000A000505BDE5C6C5EFA5F88611663A464326646
-:1000B000C0674E69DC6A6A6CF86D866F1471A27253
-:1000C0003074BE754C776C778C77AC7733DB8ADC19
-:1000D0005333DB250700750A8A1E080183E30CEB06
-:1000E00020903C01750A8A1E080180E3C0EB129043
-:1000F0008A1E0D013C02750680E30CEB049080E340
-:10010000C053508B1EBA138EDBE86A65558BEC53D7
-:100110001E2BC08ED88B5E04C1E304035E06D1E3C0
-:100120002E8B9F44008D472A1E5A1F5B5DC3558B43
-:10013000EC531E2BC08ED88B5E04C1E304035E0615
-:10014000D1E32E8B9F44008D47341E5A1F5B5DC345
-:10015000FB558BEC53515256571E061E0733C08E6B
-:10016000D88B5E04268A47592503008BF0D1E62EF2
-:100170008BB4C400C1E0042602471AD1E08BE82EFC
-:100180008BAE4400892C268A471C88440F268A4758
-:100190001D884410268A471E884411268A471F88D6
-:1001A0004412268A4720884413268A472388441409
-:1001B000268A4724884415268A475A88440E33C025
-:1001C00089440689440888440B88440AB021B464F1
-:1001D000894404894402B05588440D88440CE86A77
-:1001E00000725BE8C900E8C110894408807C0F01F7
-:1001F0007429E82B02E87F02807C0F03741DE8A9B4
-:10020000108BF82B44083DA00F7210897C0833C076
-:1002100087440685C07504C6440AFF8A440A84C020
-:10022000750BB80800E86A4AE8A90173BFE84F01F6
-:100230008166487FFF83667ABFB002E8040E8A4475
-:100240000A98071F5F5E5A595B5DC3814E48800064
-:10025000B040E83D4AE88940732AE84D108BD8B099
-:1002600005E82E4AF6462702751AE83D102BC33DD5
-:10027000581B72EB8166487FFFB002E8C40DC6448C
-:100280000A01F9C3834E7A40F8C3FBB001E8024A81
-:10029000FAE8991EE40A84C075F0B04EE60AFBB095
-:1002A00001E8EE49FAE8851EE40A84C075F0C3FA55
-:1002B000E87A1EE4EC884416E4E4884417E4F888FD
-:1002C0004418E4F0884419E41088441AE41288447D
-:1002D0001BE41488441CE43488441DE43688441E1E
-:1002E000E4D824018AE0E4DA24020AC488441F8A9C
-:1002F0004410E8CD1F8A4411E835218A4412E88968
-:10030000218A4413E84321C686A10000E414241086
-:10031000E614E412243DE6128A44153C01721E776D
-:1003200016B011E634B013E636E4140C10E614E40B
-:10033000120C40E612EB06E4120C02E6128A440F9D
-:100340003C0174063C02740AEB0EE4120C08E6123F
-:10035000EB06E4120C10E612E82FFF8A44143C026C
-:100360007508B05588440C88440DB021B4648944A4
-:1003700004894402E40C0C10E60CE8ED39FBC3E8F8
-:100380005F3F7308FBB00AE80849EBF3FAE89D1DEC
-:100390008A64168A441789869400E6E48AC4E6ECE7
-:1003A0008A64188A441989869600E6F08AC4E6F8B9
-:1003B0008A441AE6108A441BE6128A441CE6148A10
-:1003C000441DE6348A441EE6368A441FE6D8E6DA3F
-:1003D000E9B7FE90FA8A440EE6FEE402A80175052C
-:1003E00033C0FBF8C333C0E400FBF9C38A64148054
-:1003F000FC02742BFEC0FEC780FF4E721C74098085
-:10040000FF507308B00AEB17B00DEB1302DC32FF9C
-:1004100080FB7F7C02B3218AC33C7F7C02B021C376
-:10042000FA807C0B047602FBC38B46243D080072E5
-:10043000F68E46028B7E228A440C8B5C02AAE8ABC5
-:10044000FFAAE8A7FFAAE8A3FFAAE89FFF88440C39
-:10045000895C0280440B04897E22836E24048346D7
-:100460001A04807E26027406806626FDFBC360B0F7
-:10047000FDE8023F61FBC3FA807C0F037509C644A7
-:100480000B00E8E538FBC3C47E148B4E3A85C97572
-:1004900035268B0D4747E3EA3B7E047622B80200FF
-:1004A00039462E7707C7462E0000EB138B5E2C894A
-:1004B0005E0426C70700004343895E2C29462E852B
-:1004C000C978CE894E3A8A440D8B5C04268A25472A
-:1004D0003AC47516FE4C0BFF4406E80FFFE2ED88A8
-:1004E000440D895C04894E3AEBA7C6440AFEE879BC
-:1004F00038FBC390E8B30D8AE88A0ECB13B3078AA2
-:10050000C1EEEB00EC3AC1750902CDFECB75F0EB04
-:100510000C90880ECB138AE8BBFFFFF9C3880ECB83
-:1005200013F8C390BB3F3F8A8E9E00BAFE00EC8A50
-:10053000E832C122C37502F8C3F9C390E8E5FF733E
-:1005400001C3BAD000BB03038A8E9F00EC8AE83255
-:10055000C122C37502F8C3F9C39033C08ED88EC0D0
-:10056000803EC813007507B00AE82647EBF2FB335C
-:10057000DB8A1EC913434383FB7E760733DBB0025D
-:10058000E80F472E8BAF4400837E080074E7881E77
-:10059000C913B002E8FB46FAF7463840007414E885
-:1005A000961BE87FFF721C33D28A969F0083C20E8F
-:1005B000EB0C90E8771BE883FF7208BA4800E83339
-:1005C000FF73AB23CB898E9A0089969C00FE86B57B
-:1005D00000C606C81300B00AE8670AFBEB891018CA
-:1005E000082833C0A005018AC824407524C7067CAA
-:1005F000128E45C70642120100C606541202B00808
-:10060000F6C1017402B004A34612A24C12A29412C5
-:10061000C3C7067C12B645A00F0184C0750E6A00E0
-:100620001FC60693121E9C0EE8B10C90C70644121A
-:100630000100A342128BD8C1E304881E9412BEE2CB
-:10064000052BF08BC833DB8BFB2EAC888548128AD8
-:10065000D80C05E6FE8AE0EB00E4FE32C4A83F7445
-:1006600003E99E00E400888550128AE02430BA1025
-:10067000FF3C30741280FC04740ABA0403F60608C6
-:1006800001FE7403BA080F88954C1202FA32C0F6C4
-:10069000C4087402B001888558128AC43C35745B62
-:1006A0003C3674573C3474533C04744F3C14744BC4
-:1006B0003C157447A8407425C685541204D1E7B48C
-:1006C000038AC389855C128AC38AE380CC01898549
-:1006D0006412D1EF47E203EB1A90E96CFFC6855430
-:1006E0001202D1E78AE68AC30C0489855C12D1EF35
-:1006F00047E2E733C08AC7A34612C3C68554120631
-:10070000EBBBC68554120033C08885501288854CD7
-:100710001288855812EBA6C7462602128B461E8900
-:1007200046008946228B4620894624C7461A000087
-:10073000C3C7463C8000C7463801001E568B763042
-:100740008976048976148E5E0633C089044646890C
-:10075000762C89463A8B4632484889462E5E1FC31E
-:1007600033C089464889464AC74646AE0189464E47
-:100770008B46448946508B4642894640894608C389
-:1007800033C0894676894678C7467A1000561E8B54
-:10079000767089761089760C8E5E12C70400008B05
-:1007A00046728946741F5EC3895618895602895657
-:1007B0000689560A89560E8956128956168BD84BC9
-:1007C0004BC1E302BF0200897E1E03FB897E30031A
-:1007D000FB897E4203FB897E7083EB08895E20895A
-:1007E0005E32895E44895E7250E82BFFE871FFE853
-:1007F0003FFFE88BFF58C3B83075C1E8040E5B03B8
-:10080000C3A3BA13833E4212007407803E941200C1
-:10081000750E6A001FC60693121E9C0EE8BD0A9054
-:10082000B8307AC1E80440A3C0132B061201F7D8F0
-:1008300033D28BCA8A0E9412F7F13D8000770E6A8C
-:10084000001FC6069312259C0EE8900A90483DFFB3
-:10085000077203B8FF07A3C21333C98A0E94123379
-:10086000F6B800092E8BAC440089464C404646E25F
-:10087000F38A0E941233F68B16C013A1C2132E8B7B
-:10088000AC4400E822FF03D04646E2F2C333C02E58
-:100890008BAD44008946084747E2F4C35133C00A90
-:1008A000C22E8BAD440089869E00814E38002047C1
-:1008B00047FEC480FC04720432E4FEC0E2E35983C4
-:1008C000E9107405F7D9E8C4FFC35133C00AC22E3A
-:1008D0008BAD440089869E00834E3840474780C4D4
-:1008E00010790432E4FEC0E2E65983E9107405F79A
-:1008F000D9E899FFC3E8D2FFC38D089C08CA08F560
-:10090000088B0E421233F6515633DB8BCB8A944858
-:10091000128A8C4C128A9C54128BFEC1E70585DB2F
-:100920007502B1102EFF97F9085E5946E2D9C3014E
-:10093000CC03D000E802D000E801D000E800D000ED
-:10094000E804D0A8DA00DC00DE01D803CC03CC0335
-:10095000CC04D0A8DA20DC00DE03CC03CC03CC002E
-:10096000D803CC03CC03CC03CC03CC03CC03CC0303
-:10097000CC03CC03CC03CC03CC03CC03CC03CC03FF
-:10098000CC04D000DA20DC03DE01D803CC03CC0396
-:10099000CC03CC00D800CC00D0000056521E0E1F55
-:1009A000BE2F0933D2FCAD85C0740D8AD4EEAD855F
-:1009B000C074058AD4EEEBEE1F5A5EC3E48084C097
-:1009C00074167814B027E6FCB011E634E4FC3C273A
-:1009D0007506E4117502F8C3F9C383C206B0BFEE11
-:1009E00083EA02B010EE8886AF00B01183C204EE35
-:1009F00083C202EEB01383C202EE83C202EE2EA1C6
-:100A00004C2D8986940083EA0EEE83C2028AC4EEDE
-:100A100083C204B003EE8886A80083EA0432C0EEE5
-:100A200083C202B089EE8886A6000C06EEB040B400
-:100A30003889461CC74636380083C20432C0EE8867
-:100A400086A700C383C206B0BFEE83EA02EC3A86F3
-:100A5000AF00752483C204EC3C11751C83C206EC04
-:100A60003C13751483EA088A86A800EE83EA02EC38
-:100A700024C03CC07502F8C3F9C333C98BD18BF1D4
-:100A80008A0E9412C1E9022E8BAC4400F74638005E
-:100A900020740E8A869E00E6FE32C0E68042E8FAA6
-:100AA000FE83C608E2E185D27403E80508C333C9B2
-:100AB0008BF18A0E94122E8BAC4400F7463840001E
-:100AC0007406E87316E812FF4646E2EAC333C98BA0
-:100AD000F18A0E9412C1E9022E8BAC4400F746381D
-:100AE00000207416E84616E8D2FE730E6A001FC690
-:100AF0000693121C9C0EE8E3079083C608E2D9C354
-:100B000033C98BF18A0E94122E8BAC4400F7463811
-:100B100040007416E82116E82AFF730E6A001FC60B
-:100B20000693121C9C0EE8B307904646E2DAC30C0B
-:100B300000001000131200001400283C001B3E00AF
-:100B4000002A00002C0000420014D80000DA000047
-:100B50003400113600133800113A001300005650CB
-:100B600052BE2F0B2EAD85C07406922EACEEEBF468
-:100B70005A585EC3532EA16022E6E4E6F08AC4E62A
-:100B8000ECE6F8E8D8FFB04BE610B050E612B0380B
-:100B9000E614E8AE15B046E60AE8A715B01AE60A6C
-:100BA000E8A015B022E60AE89915E8FD068BD8E41E
-:100BB00016A8047518E8F2062BC33D320072F06ADD
-:100BC000001FC6069312239C0EE8100790E8DA0671
-:100BD0002BC33D2400771BB031E6FC565155B910AC
-:100BE000002E8BAC4400814E3880004646E2F25D18
-:100BF000595EE869FFE84B15B046E60AE844155B24
-:100C0000C333F68B0E42122E8BAC4400F7463800ED
-:100C1000207406E81715E85BFF83C620E2E9C38B62
-:100C2000C20504008946282EA14C2D89868E008994
-:100C300086900089869200C686A3000AC686C300F5
-:100C4000035283C2048A86A6000C06EE5A83C202AF
-:100C5000B005EE8886A500C3E803FFE8E514B042BE
-:100C6000E60AF74638800074062EA19C22EB042E7B
-:100C7000A16C22C7461C0C008986940089869600C8
-:100C800089868E008986900089869200E6F0E6E4E7
-:100C90008AC4E6F8E6ECC686C30003E8A514B01AD9
-:100CA000E60AB0108886A500E60CC333C98BF18A2A
-:100CB0000E94122E8BAC4400F7463840007406E8C0
-:100CC0007614E85AFF4646E2EAC333C98BF18A0E2E
-:100CD00094122E8BAC4400F7463800207406E84C82
-:100CE00014E874FF4646E2EAC390833E441200755E
-:100CF00014B001BA0601EE2AC0EEB002EEB004EE66
-:100D0000B80002EB0FBA0601B040EEB801008A0E3F
-:100D10000E01D3E0A38812C3A18812A384122D2050
-:100D200000A38A122D2000A38212C706861220007B
-:100D3000C70680123200C3833E44120074768B0EC5
-:100D4000421233F68AA4541284E4745F8A844812EF
-:100D50000C04E6FEF6C4047425B01BBA0000EEEBEA
-:100D6000002AC0BA0200EEEB00B003EEEB0032C086
-:100D7000BA0200EEEB00BA0000B000EEEB2DB01F9F
-:100D8000BA0000EEEB002AC0BA0200EEEB00B0039E
-:100D9000EEEB00D1E68A845D12D1EEF6D0BA020005
-:100DA000EEEB00BA0000B00AEEEB00E404EB00E466
-:100DB0000446E290C390B81400BA3EFFEFB80600B4
-:100DC000BA32FFEFB80F00BA34FFEFBA36FFEF8345
-:100DD0003E4412007516B81100BA38FFEFB8120081
-:100DE000BA3AFFEFB81B00BA3CFFEFC3B81100BA24
-:100DF00038FFEFB81200BA3AFFEFB81B00BA3CFF59
-:100E0000EFC3B8FC00BA28FFEFFB833E4412007426
-:100E100007B8CC00BA28FFEFC300FFFF202428FF4B
-:100E20002CFFFF303438FFFF3C903C0F770EBB198E
-:100E30000E2ED73CFF74058AD8F8C3902ADBF9C37D
-:100E4000833E4412007427A00601802606013080EC
-:100E50003E0601307518B90200BFC413BA0601EC92
-:100E6000A82075F8BA0401EDABE2F1EB1690B904D5
-:100E700000BFC413BA0601ECA82075F8BA0401EC4F
-:100E8000AAE2F1FA90BEC413AD80E43F80FC027484
-:100E90000E6A001FC60693120A9C0EE83E0490AD2F
-:100EA0003C0F75ED8AC4E881FF72E6881E1A01C600
-:100EB000068E1200B0000A061A01BA0001EEC6063C
-:100EC0008F1240833E4412007506B80C00EB04906C
-:100ED000B84C00BA28FFEFC3833E4412007501C32B
-:100EE000A150120B0652120AC4A80874F2A00F01F6
-:100EF0002AE450FF36BA131FE8505683C4026A0032
-:100F00001F33C0A3BC13A00F01A3BE138B1EBC13C1
-:100F10008A875012F687501208740D24078AE0BEA3
-:100F2000CC00A0BC13E8943DFF06BC13FF0EBE131B
-:100F300075DAC3901E33C08ED8B001E8543D1FC38C
-:100F400033C98BF18A0E94122E8BAC4400C74662D3
-:100F50003844C7467CFC3BC7467EE23BC7868000E0
-:100F6000EC3CE8AB16C686C00011837E080074070F
-:100F70005156E833335E594646E2CDC333C98BF14F
-:100F80008BF98A0E9412C1E902E3132E8BAC440054
-:100F90008A869E0088856C1283C60847E2EDC3FAF4
-:100FA000FCB0C0BA0001EE33C08ED88EC08ED0BF68
-:100FB0001601B9CC772BCFD1E9F3ABBC4012E8D9FD
-:100FC00002E8703CBECC0FE8F23CF49033C08ED8FF
-:100FD0008EC08ED0F6060A0180740BBE3555E8DB54
-:100FE0003CB001E8AC3CE8B300E8F6F5E808F8E806
-:100FF0000FF9E885FAE8B6FAE8EFFCE8C210E80372
-:101000003CE8B2FDE830FDE85402C6068F12C0E8A5
-:10101000BBFAE8EBFAE8E9FBE8AFFCE88DFCE81F77
-:10102000FFE858FFE8DBFDE816FE33C0BE5A05E8CE
-:101030008A3CE8A3FEE8E0FCFBBEA444E87D3CE972
-:10104000CA2D56988BF08B425285C07527C74252E5
-:10105000010053368B9C2C01F6C301750C36896850
-:10106000523689AC2C015B5EC33689AC2C013689C3
-:10107000AC1C015B5EC356988BF033ED368B841C41
-:1010800001A80175158BE833C08742523689841C4C
-:1010900001A80174053689842C015EC3565133F6CC
-:1010A000B80100B9080089841C0189842C014646D6
-:1010B000E2F4595EC390BB01008BE8FF4E6E740AE8
-:1010C0008BDD8B4658A80174F0C38B4648A90800F5
-:1010D0007445F7463840007427E85C1080C2068AE1
-:1010E00086A80024BF8886A800EE60B0FEE886329D
-:1010F00061B002E84CFF8B464824F7894648EB175D
-:10110000E82A10814E2600408A86A5000C028886B7
-:10111000A500E60C8B4648A904007414B002E8212F
-:10112000FF8B464824FB89464860B0DFE8473261C0
-:1011300033C0874658F6C301750B36894758A80156
-:10114000750DE974FFA32201A8017503E96AFF89FF
-:101150001E3201C3BB01008BE8F74638400074150E
-:10116000E8D50F80C20AECA840750A8BDD8B465685
-:10117000A80174E3C38B462680E4FE80CC02894636
-:1011800026B002E8BCFE33C0874656F6C301750A96
-:1011900036894756A801750BEBBDA32001A8017540
-:1011A00002EBB4891E3001C3601E062BC08ED8A08E
-:1011B000901284C07549A12201A8017503E8F6FECA
-:1011C000A12001A8017503E88AFFA1AC13487805A6
-:1011D0007445A3AC13A1AE134878057451A3AE13A4
-:1011E000A1B0134878057463A3B013A17E124078B0
-:1011F00003A37E12B80080BA22FFEF071F61CFA0C1
-:101200009112403C02720B33C0A29112FF167C1265
-:10121000EBA4A29112EB9FA08E1232068F12A28E27
-:10122000120A061A01BA0001EEB82C01EBA4833EA3
-:101230008412107211BA28FFED0C81EFE85337BA0F
-:1012400028FFED247EEFB80400EB92C6068D120154
-:10125000E83F37C6068D1200A1B213EB8B908A1EB1
-:101260000B012AFF6BC319BA62FFEFB80A00BA601C
-:10127000FFEFB801E0BA66FFEFB8FFFFBA52FFEF29
-:10128000B809C0BA56FFEFC706AC132C01C706AEAB
-:10129000130400C606911200C3908A1E0B012AFF98
-:1012A0006BC305D1E8A31801C39052BA50FFED5AA1
-:1012B000C39053518B1E1801B9320590E2FE4B7555
-:1012C000F7595BC3B080BA00010A061A01EEC39059
-:1012D000B040EBF2B0C0EBEEB000EBEAFA60061EF5
-:1012E000162BDB8EDB2EA1BA4C2EA3924CA09312B0
-:1012F000988BE889262D7A803ECA13007403E96B27
-:1013000042E8C0FFE8ABFFE8A8FFB020C606901295
-:1013100000FF167C128BFD83FF0A7211E8B9FFE80B
-:1013200090FFE8ABFFE88AFF83EF0AEBEA0BFF745C
-:101330000FE8A4FFE87BFFE89AFFE875FF4F75F11F
-:10134000E895FFE86CFFEBB98A86A50024FDEE88DE
-:1013500086A500C38A86A6000C02EEC38B7638F7FA
-:10136000C6010074EF8B4E368B462E3BC173028B49
-:10137000C82BC189462E014E34C47E0426010D8B34
-:101380007E2C83EA04F36C8EC1897E2C3B463C7232
-:1013900012F7C62000750B83CE20897638B000E89E
-:1013A000A0FCC3F7C60400741B8BD883CE108976CB
-:1013B000388A86A70024FE8886A70083C208EE83A9
-:1013C000EA088BC33D40007201C3814E380004839C
-:1013D000C2028A86A50024FA8886A500EEC38A8602
-:1013E000A6000C02EEC3F74638010074F18B4E2EB6
-:1013F00032DB8ABEA30083C206C476048B7E2C83B4
-:10140000F908722CECA80174168AE083EA0AEC83CE
-:10141000C20A84E77551AAFEC34983F90873E5320D
-:10142000FF26011C015E34897604894E2E897E2CAC
-:101430003B4E3C7211F64638207401C3834E38206F
-:10144000B000E8FDFBC3F64638047415834E38102F
-:101450008A86A70024FE8886A70083EA02EE83C25C
-:10146000023D4000725DC332FF26031C85DB740918
-:1014700026891C8BF74747494980E41E80CCC0264B
-:101480008904F6C41074278B7638F7C60010740BE5
-:1014900050FE86B200B00AE8A8FB58F7C6000174F7
-:1014A0000DE882268B76388B4E2E8B7E04AB8BF725
-:1014B00033C0AB32DB8ABEA300494983F9087217F7
-:1014C000E941FF814E38000483C2F88A86A50024D2
-:1014D000FA8886A500EEC3E945FF83C208EC88863A
-:1014E000AA00C0E8048AE08AC88686A90032E08B98
-:1014F0005E3E84E3744F8AC18B4E26F6C504740C9D
-:10150000A808740580E1BFEB0380C940F6C50874E4
-:101510000CA802740580E17FEB0380C980884E2609
-:101520008BF08A86A50084C97408A802741524FD6E
-:10153000EB06A802750D0C028886A50083EA0AEE68
-:1015400083C20A8BC684E77501C3C686BA0001B0A0
-:101550000EE8EEFAF74638000274EE837E2E06722D
-:10156000E88AA6AA00C45E048B7E2CB0FFAAB00253
-:10157000AB26830703836E2E03897E2CF646382024
-:101580007401C3834E3820B000E8B6FAC39083EAF2
-:1015900008E9B4FD83C2068B5E26F6C3C075EF8BE7
-:1015A0004E1CEC8886A40083EA0AA82075028ACD26
-:1015B00032ED8B461A3BC87318014E2A2BC189465F
-:1015C0001AC57600F36E8ED98976003D2000723000
-:1015D000C385C074318BC801462AC57600F36E8E70
-:1015E000D980CB02895E26E832F1F6C701751683F1
-:1015F000C202E853FDF6C710750BB002E843FAC308
-:10160000F6C70174F0C380CB02895E26F6C7017469
-:10161000DE83C202E831FDF686A40040740B80E749
-:10162000FE80CF02895E26EBCCB004E814FAC3C07A
-:10163000C2C8CAC4C6CCCED0D2D8DAD4D6DCDE90EA
-:10164000E90E01E4C48AE0E4C48BD083F90872F0A7
-:1016500026833F0074048BDF49498BFB8ADE83E3DA
-:101660000F2E8AA72F16ABF6C4107424F7C60010ED
-:10167000740B50FE86B200B00AE8C6F958F7C600EF
-:1016800001740DE8A0248B76388B4E2E8B7E04AB34
-:10169000897E0433C0AB4949894E2E897E2C8BC18B
-:1016A000EB4E90EB9E90E4D684C07963E6D08AC876
-:1016B00025030003D8D1E32E8BAF4400888EAE0003
-:1016C0008B4E2EC45E048B7E2C8B7638E4862407EA
-:1016D0003C0375CFE41C913BC173028BC82BC189BD
-:1016E000462E014E3426010FBAC400F36C897E2CBD
-:1016F0003B463C721CF7C62000750B83CE208976D2
-:1017000038B000E83CF98A86AE00243FE6D6C3F93B
-:10171000C3F7C60A007435F7C61000752F83CE10C4
-:10172000897638F7C60200740E50E4D824FEE6D855
-:1017300058F7C6080074155051B9E803E40A84C08C
-:10174000E0FA84C07504B024E60A59583D4000739D
-:10175000B58A86A50024EF8886A500E60C81CE1008
-:1017600004897638EBA00008040C0109050D020A73
-:10177000060E030B070F004080C02060A0E0105051
-:1017800090D03070B0F0E4D2E6D08AC825030003D0
-:10179000D8D1E32E8BAF4400888EAE00E4D8C0E8E9
-:1017A000048BD82E8A8766178AE08AC88686A900A5
-:1017B00032E0E4988B5E3E84E374548AC18B4E26FB
-:1017C000F6C504740CA808740580E1BFEB0380C95A
-:1017D00040F6C508740CA802740580E17FEB038015
-:1017E000C980884E268BF08A86A500F6C1FD740854
-:1017F000A806741924F9EB0FA8067511F6C5017532
-:10180000040C04EB020C028886A500E60C8BC6844F
-:10181000E775098A86AE00243FE6D2C3C686BA00C1
-:1018200001B00EE81CF8F74638000274E6837E2EFD
-:101830000672E08A86A9008AE08686AA008AC832F3
-:10184000C480C90B22C1C0E4040AE0C45E048B7EDC
-:101850002CB0FFAAB002AB26830703836E2E038948
-:101860007E2CF646382075AB834E3820B000E8D188
-:10187000F7EBA090E41224DFE61281E3FE9F895E7D
-:1018800026836648F7EB7390F6C72075E7E4120CE1
-:1018900020E61232C0E6C6B083E6C680CF20895E5D
-:1018A000268A86A5000C028886A500E60CEB7490BB
-:1018B000F6C74075D3E4120C20E61232C0E6C6B07B
-:1018C00081E6C680E7DF80CB01895E26B006E8713D
-:1018D000F7908A86A50024F9E60C8886A500EB43DC
-:1018E000E4D4E6D08BF825030003D8D1E32E8BAFE8
-:1018F00044008B5E26F6C76075B6F6C3C075D3BAD2
-:10190000C6008B4E1C8B461A3BC8731E014E2A2BF9
-:10191000C189461AC57600F36E8ED98976003D20BE
-:1019200000723D8BC7243FE6D4C385C074398BC891
-:1019300001462AC57600F36E8ED983CB02895E26D6
-:10194000E8D9EDF6C70175398A86A50024F9E60CB9
-:101950008886A500F6C71075CAB002E8E4F6EBC3A6
-:10196000F6C70174EFEBBCF6C70174DC8A86A500EC
-:10197000A802741181E3FFFE81CB0002895E26EB91
-:10198000C78A86A50024FB0C02E60C8886A500EB1E
-:101990009290FDF7DF7FFEFBEFBF0004000405041B
-:1019A00005040104000405040504060406040504F6
-:1019B00005040604060405040504020400040504E5
-:1019C00005040104000405040504060406040504D6
-:1019D00005040604060405040504070407040504B9
-:1019E00005040704070405040504060406040504A9
-:1019F0000504060406040504050407040704050499
-:101A00000504070407040504050406040604050488
-:101A10000504060406040504050403040004050483
-:101A20000504010400040504050406040604050475
-:101A30000504060406040504050402040004050464
-:101A40000504010400040504050406040604050455
-:101A50000504060406040504050407040704050438
-:101A60000504070407040504050406040604050428
-:101A70000504060406040504050407040704050418
-:101A80000504070407040504050406040604050408
-:101A90000504060406040504050433DB8AD88A8796
-:101AA0006C12E6FEC1E302E4CEA8047509A8027434
-:101AB00003E92CFEF9C35053E8CBFC5B58A8027431
-:101AC00003E91CFEF8C333DB8AD88A876C12E6FE72
-:101AD000C1E302E9D0FB9A1AC61A00000200040012
-:101AE00002000600020004000200080002000400D8
-:101AF000020006000200040002000A0002000400C6
-:101B000002000600020004000200080002000400B7
-:101B1000020006000200040002000C0002000400A3
-:101B20000200060002000400020008000200040097
-:101B3000020006000200040002000A000200040085
-:101B40000200060002000400020008000200040077
-:101B5000020006000200040002000E000200040061
-:101B60000200060002000400020008000200040057
-:101B7000020006000200040002000A000200040045
-:101B80000200060002000400020008000200040037
-:101B9000020006000200040002000C000200040023
-:101BA0000200060002000400020008000200040017
-:101BB000020006000200040002000A000200040005
-:101BC00002000600020004000200080002000400F7
-:101BD00002000600020004000200C390DA1494150B
-:101BE0005C13E613DA1BDA1BE613DA1B8B94641220
-:101BF000C1E604A80174355033C08AC2E6FEE4A0F1
-:101C000085C074278BD82E8A9FDA1A52562E8BA83D
-:101C100044008B5628ECA801750D8886AD00240E73
-:101C20008AD82EFF97DC1B5E5AEBCD58A80274367B
-:101C300083C61033C08AC6E6FEE4A085C074278B35
-:101C4000D82E8A9FDA1A52562E8BA844008B56281B
-:101C5000ECA801750D8886AD00240E8AD82EFF975A
-:101C6000DC1B5E5AEBCDC39032E48BD88BD02E8A2E
-:101C70009F9A192E2297921956528AC3240303C69B
-:101C800080E304D0EB2EFF97D61A585EA955007555
-:101C9000D9C3601E062BC08ED8A15C12E6FEE400FC
-:101CA00022C4740833F6E8BFFFEBEE90E40407E4C7
-:101CB000041FB80080BA22FFEF61CF90601E062B90
-:101CC000C08ED8A15E12E6FEE40022C47408BE04F1
-:101CD00000E894FFEBEDE40407E4041FB80080BAC9
-:101CE00022FFEF61CF90601E062BC08ED8A15C1240
-:101CF000E6FEE40022C4741833F6E86BFFA160121C
-:101D0000E6FEE40022C474E5BE0800E85AFFEBDDFD
-:101D1000A16012E6FEE40022C475EDE40407E404C9
-:101D2000A15C12E6FEE4041FE404B80080BA22FFBE
-:101D3000EF61CF90601E062BC08ED8A15E12E6FE2A
-:101D4000E40022C47419BE0400E81CFFA16212E67C
-:101D5000FEE40022C474E4BE0C00E80BFFEBDCA13F
-:101D60006212E6FEE40022C475EDE40407E404A177
-:101D70005E12E6FEE4041FE404B80080BA22FFEF1E
-:101D800061CF601E062BC08ED8A15C12E6FEE480F7
-:101D900084C4740833F6E853FEEBEE90B80080BAC2
-:101DA00022FFEF071F61CF90601E062BC08ED8A1C7
-:101DB0005E12E6FEE48084C47408BE0200E82CFED5
-:101DC000EBEDB80080BA22FFEF071F61CF90601ED5
-:101DD000062BC08ED8A16012E6FEE48084C474088D
-:101DE000BE0400E806FEEBEDB80080BA22FFEF0764
-:101DF0001F61CF90601E062BC08ED8A16212E6FE36
-:101E0000E48084C47408BE0600E8E0FDEBEDB80091
-:101E100080BA22FFEF071F61CF90601E062BC08E95
-:101E2000D8A15C12E6FEE40022C4741833F6E83749
-:101E3000FEA16012E6FEE48084C474E5BE0400E8FE
-:101E4000AAFDEBDDA16012E6FEE48084C475EDA17D
-:101E50005C12E6FEE40407E4041FB80080BA22FF27
-:101E6000EF61CF90601E062BC08ED8A15E12E6FEF9
-:101E7000E40022C47419BE0400E8ECFDA16212E67D
-:101E8000FEE48084C474E4BE0600E85FFDEBDCA1E0
-:101E90006212E6FEE48084C475EDA15E12E6FEE403
-:101EA0000407E4041FB80080BA22FFEF61CF601E70
-:101EB000062BC08ED8A15C12E6FEE48084C47418A0
-:101EC00033F6E827FDA16012E6FEE40022C474E5C3
-:101ED000BE0800E892FDEBDDA16012E6FEE4002200
-:101EE000C475EDE40407E4041FB80080BA22FFEFD4
-:101EF00061CF601E062BC08ED8A15E12E6FEE48084
-:101F000084C47419BE0200E8E2FCA16212E6FEE499
-:101F10000022C474E4BE0C00E84DFDEBDCA16212AB
-:101F2000E6FEE40022C475EDE40407E4041FB800F3
-:101F300080BA22FFEF61CF90601E062BC08ED8A121
-:101F40005C12E6FEE48084C4741833F6E89DFCA1BC
-:101F50006012E6FEE48084C474E5BE0400E88CFCF4
-:101F6000EBDDA16012E6FEE48084C475ED071FB8C6
-:101F70000080BA22FFEF61CF601E062BC08ED8A171
-:101F80005E12E6FEE48084C47419BE0200E85CFCC4
-:101F9000A16212E6FEE48084C474E4BE0600E84B4D
-:101FA000FCEBDCA16212E6FEE48084C475ED071F41
-:101FB000B80080BA22FFEF61CF90601E062BC08E62
-:101FC000D8902AC0E6FEE4CEA801741433DBE8D52D
-:101FD000F6EBEF90B80080BA22FFEF071F61CF90B9
-:101FE000F60605010175EDB001E6FEE4CEA8017428
-:101FF000E3BB0400E8AFF6EBC990601E062BC08E71
-:10200000D890FB90FA2AC0E6FEE4CEA802741333FF
-:10201000DBE8CCF8EBECB80080BA22FFEF071F61D9
-:10202000CF90A80474F033DBE85BF7EBD590601E2B
-:10203000062BC08ED890FB90FAB001E6FEE4CEA845
-:10204000027415BB0400E897F8EBEB90B80080BA77
-:1020500022FFEF071F61CF90A80474F0BB0400E8D3
-:1020600024F7EBD26A001FC6069312099C0EE86B98
-:10207000F2906A001FC6069312299C0EE85DF2904A
-:10208000722072207220CE1D921CE61C1A1E722035
-:10209000821DAE1E381F7220821D72207220381FD2
-:1020A000722072207220F41DBC1C341D641E72202C
-:1020B000A81DF21E781F7220A81D72207220781FA2
-:1020C000FCB940008CCBB864202BFFAB93AB93E200
-:1020D000FAC7064C00A811833E4412007520C706BB
-:1020E0003C00084BC7063000BA1FC7063400FA1F71
-:1020F000F6060501017506C70638002E20C3C7067F
-:102100003C00564B33DB8A1E5412C1E302021E56BA
-:10211000122E8B878020A330008A1E5512C1E30245
-:10212000021E57122E8B87A020A33400C38B869EDD
-:1021300000E6FE86C4E6D0C38B869E00E6FE33D260
-:102140008AD4C351B91027E40A909084C07405E280
-:10215000F659F9C359F8C384C0781E518AE88AC871
-:10216000B80100D3E0098698003AAEA00059751076
-:10217000E8A9E5834E2602F9C39889869800EBF01A
-:10218000F8C384C07812518AE08AC8B80100D3E04D
-:1021900059F7D021869800C3C78698000000C383F2
-:1021A000C2048A86A6000C04EE83EA04C3E893FF07
-:1021B0007204B082E60AC38B4626A8FD74118A8693
-:1021C000A500A806740824F98886A500E60CC3F6C5
-:1021D000C401740A8A86A50024FB0C02EB0CA80239
-:1021E000750F8A86A50024FD0C043A86A50075D8D3
-:1021F000C38A86A500EBCFE4D833DB8AD8C0EB04D2
-:102200002E8A9F6617889EA9008B5E2680E33FF684
-:10221000C7047407A810750380CB40F6C70874077D
-:10222000A880750380CB40885E268A86A500F6C309
-:10223000FD740DA806740824F98886A500E60CC371
-:10224000F6C70174040C02EBF0F6C30275E90C0446
-:10225000EBE7C404C4048504590448044104C303DF
-:10226000820341038202570241028201410182003E
-:1022700041004E02AD0157012D002B002700210027
-:102280001600F404F404A3046F045B045104F40383
-:10229000A3035103A3026D025102A3015101A30044
-:1022A00051006202D9016D01380036003100290069
-:1022B0001B005157BF0200EB0F905156BF0100EBBE
-:1022C00007905156BF0300903C197602B017988BC7
-:1022D000F08A82C4002AE48BF083FE187346D1E6AC
-:1022E0002E8B8C5222F74638800074052E8B8C8200
-:1022F00022F7C7020074123B8E9400740C898E94EE
-:10230000008AC5E6EC8AC1E6E4F7C7010074123B17
-:102310008E9600740C898E96008AC5E6F88AC1E60E
-:10232000F05E59C377068B8E8E00EBC58B8E9000C6
-:10233000EBBFD503F6003E0010000400CA043301D1
-:102340004D00140005000103050709000102030404
-:1023500080841E00A02526000000608BF033FF2E35
-:10236000A150232E8B165223BB3223F74638800010
-:10237000740C2EA154232E8B165623BB3C23B90577
-:10238000002E3B31730A4747E2F7B8FFFFEB1D9081
-:10239000D1EF2E8A8D46232AEDD1EAD1D8E2FAF781
-:1023A000F6050200C1E8022E8AA54B232EA358236E
-:1023B000612EA15823C3080020008000000260099C
-:1023C0000800200080000002000800000100020058
-:1023D0000300040052565785C074053D0109760379
-:1023E000B80109BF5B01F7463880007403BFB20132
-:1023F00033F62E3B84B62376044646EBF5F7E72EFC
-:102400008BBCC02303C783D200D1E7F7F72E8AA481
-:10241000CA235F5E5AC3E43E80BEC30003750CF757
-:10242000467A200074050C80E63EC3247FE63EC356
-:1024300024038886C3008AE0E41024FC0AC4E61062
-:10244000808EA10042E8CEFFC390568BF083E60752
-:10245000D1E62EFFA458249068246C2470247424A0
-:102460007824872487248724B400EB0EB4C0EB0AB9
-:10247000B440EB06B420EB02B4A0E410241F0AC45D
-:10248000E610808EA100425EC3903C0277128AE083
-:10249000E41024F3C0E4020AC4E610808EA10042D6
-:1024A000C3908B5E3884C0741F3C02742083CB08B9
-:1024B0008B462E3B463C770CE888FC7207B024E63E
-:1024C0000A83CB10895E38C383E3F7EBF7F7C310B9
-:1024D0000074F5E86DFC72EC8A86C000E638B02323
-:1024E000E60AEBE08B5E388B462E3B463CE4D87721
-:1024F0000B24FE80CB12E6D8895E38C30C0180CB5A
-:1025000002EBF35033DBC1E804250F0F8AD82E8A83
-:102510008766178ADC2E8AA7661709463E58C3507D
-:1025200033DBC1E804250F0F8AD82E8A8766178A05
-:10253000DC2E8AA76617F7D021463E58C38B463E4D
-:1025400033DB8AD80ADC2E8A877617E62C8AE0E409
-:102550002A240F0AC4E62A8A86A50084E4750DA8F9
-:10256000807411247F8886A500E60CC3A8807504BA
-:102570000C80EBF1C31E6033C933D233F68ED98D94
-:10258000BEFD00578B0584C074168BD1428BFE4F65
-:10259000780938A3E40074084F79F788A2E400466C
-:1025A0005F83C7094183F91072D989B6860089967D
-:1025B0008400611FC353C7466600008B4664A94070
-:1025C00000740DB300A980007402B37F889EC1001F
-:1025D00032DBA90200740380CB40A9004074038061
-:1025E000CB02A90080740380CB01A9301E74038044
-:1025F000CBBCA90020740380CB08A904017403801C
-:10260000CB10A90800740380CB20889EC2005BC356
-:102610000651575016078DBEC400B91F0033C0AA1B
-:1026200040E2FC8B86920089868E00898690005855
-:102630005F5907C3E4D8C0E80453250F008BD82E98
-:102640008A8766178886A9005AC30886AC00C686A2
-:10265000BA0001B00EE8EAE9C3AD36A3B413AD3653
-:10266000A3B613AD36A3B81383E90636F706B6133F
-:102670000F00C38A4626F74648800074020C108873
-:1026800086BD0032C0837E1A00750E8B5E4043808B
-:10269000E3FE3B5E0875020C01837E3A00750D1E59
-:1026A000C55E148B1F1F85DB75020C02F7463810C0
-:1026B0000074020C048B5E7AF7C3020074020C08EB
-:1026C000F7C3040074020C10F7C3080074020C2056
-:1026D000F7C3400074020C408886BF00C3906A00B4
-:1026E0001FC60693120D9C0EE8F1EB90B002E6DADD
-:1026F000F8C333C0E6DAF8C3B001E6D8F8C333C094
-:10270000E6D8F8C3B0FFE84EFAE8A1FAF8C3AC493E
-:10271000E8AFFBF8C390AC49E815FDF8C390AC49AD
-:10272000E867FDF8C390AC49E81FFDF8C390AC49D9
-:10273000E634F8C3AC49E636F8C3AC493C02771F2F
-:1027400084C0751DE41424EFE614E412243FE6125D
-:10275000E416A8047409E8EAF97204B018E60AF865
-:10276000C38AE0E4140C10E614E4120CC0F6C401B1
-:102770007402247FE612F8C3AC49E825FDF8C39043
-:10278000B80040E87DFDE8B4FDE8A8FEB001E8B976
-:10279000FEF8C390B80040E885FDE8A0FDF8C390BE
-:1027A000B80010E85DFDE894FDE888FEB008E899FF
-:1027B000FEF8C390B80010E865FDE880FDF8C3900E
-:1027C000B80080E83DFDE874FDE868FEB002E879F5
-:1027D000FEF8C390B80080E845FDE860FDF8C390BE
-:1027E000B80020E81DFDE854FDE848FEB004E859B3
-:1027F000FEF8C390B80020E825FDE840FDF8C3903E
-:10280000AC49E84814E43C24E70AC4E63CF8C39029
-:10281000B8FC3B89467CE43C0C18E63CF8C3E41267
-:102820000C02E612F8C3E41224FDEBF6E8B5FCF85E
-:10283000C390836638FDF8C3AC49A8017406834E83
-:102840007A20EB0483667ADFE8CBFBF8C3908A86B4
-:10285000A5000C0224FB8886A500E60C814E26010B
-:1028600020AC4932E489466E834E48084946F9C394
-:102870008A86A5000C0224FB8886A500E60C814E02
-:10288000260120ACB40AF6E4EBD8E8FA13E43C24C1
-:10289000F80AC4E63CF8C390AD4949894664A901E9
-:1028A00000741B8BD883E3FA751AA90400740FE433
-:1028B0003E0C02E63EB83844894662F8C390E43ED6
-:1028C00024FCEBEFE43E24FCE63EE8E8FCB8AA403A
-:1028D000EBE6E86EF87205B018E60AF8C390AC496A
-:1028E000E8CFF9F8C390AC49E8CFF9F8C390E868AD
-:1028F000FD750632C0E6DAF8C3B002E6DA36A0B4F7
-:102900001324103410E8160136A1B413A901007481
-:1029100005E8FCFEEB0EA90200740432C0EB02B025
-:1029200001E8DEFE36A1B413E8B513E43C24F80A4E
-:10293000C4E63C36A1B413C1E805250100E8FAFE5F
-:1029400036A0B5132410E859FB32C0368A26B513D9
-:10295000F6C4047409FEC0F6C4087402FEC0E8DBC5
-:10296000FD36A1B613250F00E857F936A1B613C1FD
-:10297000E804250300E8B8FA36A1B613C1E8052536
-:102980000200E805FB36A1B613F6C401750432C097
-:10299000EB0980E402D0ECB0022AC4E8ACFA36F6C7
-:1029A00006B713407405E883FEEB03E884FE36F6B1
-:1029B00006B713207405E865FEEB03E868FEF8C36C
-:1029C000E4120C01E612F8C3E41224FEEBF6E41460
-:1029D00024F00C05E614E42A24F00C06E62AF8C3D9
-:1029E000E42A24F0E62AE41424F00C07E614F8C3E1
-:1029F000AD4949E864F989868E00F8C3AD4949E8D4
-:102A000058F989869000F8C3834E2604E8A8F7F8A1
-:102A1000C390836626FBE89EF7F8C390AC4984C058
-:102A2000750DE41024EFE610808EA10042F8C3E497
-:102A3000100C10EBF190AC493C02760232C0C0E0C1
-:102A400004A82074020C0824188AE0E41224E70A7F
-:102A5000C4E612808EA10044F8C3AC498886C00049
-:102A6000F8C3AC49E63AF8C3AC4984C07408E41230
-:102A70000C04E612F8C3E41224FBEBF6AC49E8D6EA
-:102A8000F67303E827F7F8C3E412A802740424FDE0
-:102A9000E612B8F000E887FA816626FFF3E857F7F8
-:102AA000E89AFAF8C390B88000E857FA804E2708F1
-:102AB000E844F7E887FAF8C3B88000E861FA81666D
-:102AC00026FFF7E831F7E874FAF8C390B81000E889
-:102AD00031FA804E2704E81EF7E861FAF8C3B8100F
-:102AE00000E83BFA816626FFFBE80BF7E84EFAF8B0
-:102AF000C39033C0AC493C017304B001EB063C0CFD
-:102B00007602B00C89461CF8C390814E2600208ABC
-:102B100086A5000C0224FB8886A500E60C834E26C1
-:102B200001F8C390814E2600408A86A5000C0288D9
-:102B300086A500E60CF8C390AC4950E805F658723B
-:102B400008E638B023E60AF8C3F9C390AC50ADE804
-:102B500082F85AF6C201741239869600740C89867E
-:102B60009600E6F086E0E6F886E0F6C202741039D8
-:102B7000869400740A89869400E6E486E0E6EC8395
-:102B8000E903C390E4168886BC00E8E6FA33DBE488
-:102B90000CA806740380CB01A810740380CB02A894
-:102BA00080740380CB04E4128AE024180AD8E4DAA3
-:102BB000F6C4027407A840750380CB20A8027509EB
-:102BC000E42AA80F740380CB40F74638020074094A
-:102BD000E4D8A801750380CB80889EBE00FE86B431
-:102BE00000B00AE85CE4F8C3AC493C027441771FCA
-:102BF00050E84FF558720C84C0740AB012E60A808F
-:102C00004E3801F8C3B011E60A806638FEF8C38B6F
-:102C1000463825FFF7894638A9000475E68A86A557
-:102C200000A81075DE0C108886A500E60CF8C3819C
-:102C30004E3800088A86A500A81074C724EFEBE779
-:102C4000AD49493C0172113C0C770D508AE0E41407
-:102C500025F00F0AC4E614588AC484C07402E64200
-:102C6000F8C3E8CFF9FE86B900B00EE8D4E3F8C3A4
-:102C70003A86AF00741F8886AF008AE080C206B033
-:102C8000BFEE80EA028AC4EE8A86A80080C202EE05
-:102C900080EA068AC4C38B463E85C08A86A5007436
-:102CA00012A808750D0C088886A50080C202EE8067
-:102CB000EA02C3A80874FB24F7EBEC8B462684C019
-:102CC00074168A86A500A802740D24FD8886A500C6
-:102CD00083C202EE83EA02C38A86A500A80275F7C2
-:102CE0000C02EBE85283C20CECC0E8048886A90011
-:102CF0008B5E2680E33FF6C7047407A8087503803F
-:102D0000CB40F6C7087407A802750380CB80885EA5
-:102D1000268A86A50084DB7410A802740A24FD8824
-:102D200086A50083EA0AEE5AC3A80275FA0C02EBE4
-:102D3000EE90FFFF00480030BA20C41A00180012BD
-:102D4000000C0006000300028001C000600030009B
-:102D50001800CD0100018000100010000E000C00D2
-:102D6000080000000000060004000300020001004B
-:102D70005251563C1E7747988BF08A82C40032E449
-:102D800083FE18743D83FE19743E83FE1E772FD197
-:102D9000E62E8B8C322D3B8E94007422898E94000B
-:102DA00083C2068A86A8008AE00C80EE83EA068A3F
-:102DB000C1EE83C2028AC5EE83C2048AC4EE5E59A4
-:102DC0005AC38B8E8E00EBCE8B8E9000EBC8525187
-:102DD0003D05007703B805008BC8BA0200B800D0E3
-:102DE000F7F1050100D1E8595AC38B467AA820743F
-:102DF0000B80BEC3000375040C01EB0224FE894660
-:102E00007AC324038886C3008AA6A8008ADC80E4EB
-:102E1000FC0AC43AC3740B8886A80083C206EE83FA
-:102E2000EA06E8C5FFC30008183828903C04772359
-:102E300032E48BD82E8A87262E8AA6A8008ADC80C8
-:102E4000E4C70AC43AC3740B8886A80083C206EE9E
-:102E500083EA06C384C07402B0048AA6A8008ADC90
-:102E600080E4FB0AC43AC3740B8886A80083C206B8
-:102E7000EE83EA06C3908B5E3884C074343C0274DF
-:102E80003B8A86AF000C04E8E6FD8B462E3B463CB1
-:102E9000771BF7C30004751581CB000483C2028A37
-:102EA00086A50024FA8886A500EE83EA02895E38AA
-:102EB000C38A86AF0024FBE8B6FDEBF1F7C3100030
-:102EC00074EFEBED83C20CEC83EA0CC0E804888657
-:102ED000A900C3908A86A7000C018886A7008BDA18
-:102EE00080C208EE8BD3F8C38A86A70024FEEBEAE3
-:102EF0008A86A7000C02EBE28A86A70024FDEBDAA3
-:102F0000B0FFE852F2E897F2F8C3AC49E861FEF886
-:102F1000C390AC49E8EBFEF8C390AC49E835FFF844
-:102F2000C390AC49E805FFF8C3905283C206B0BF16
-:102F3000EE5283C202AC49EE5A8A86A800EE5AF8D5
-:102F4000C3905283C206B0BFEE5283C206EBE69036
-:102F5000AC493C02770D84C0750B8A86AF0024FD16
-:102F6000E80DFDF8C3508A86AF000C02E801FD5B56
-:102F700083C2088A86A700F6C301740C24DF888602
-:102F8000A700EE83EA08F8C30C20EBF2AC49E8E5B1
-:102F9000FEF8C390B80040E869F5E8F9FCE824FFC2
-:102FA000B001E8A5F6F8C390B80040E871F5E8E58F
-:102FB000FCF8C390B80010E849F5E8D9FCE804FF34
-:102FC000B008E885F6F8C390B80010E851F5E8C5F8
-:102FD000FCF8C390B80080E829F5E8B9FCE8E4FE05
-:102FE000B002E865F6F8C390B80080E831F5E8A5CE
-:102FF000FCF8C390B80020E809F5E899FCE8C4FEA5
-:10300000B004E845F6F8C390B80020E811F5E8856B
-:10301000FCF8C390AC49E8340CF8C390B8FC3B8989
-:10302000467CF8C38A86AF000C80E843FCF8C39066
-:103030008A86AF00247FEBF28A86AF000C40E82F2F
-:10304000FCF8C3908A86AF0024BFEBF2AC49A8011C
-:103050007407834E7A20EB059083667ADFE88AFD59
-:10306000F8C383C2068A86A8000C408886A800EEB2
-:1030700083EA06AC4932E489466E834E2601834ECC
-:103080004808B006E8BBDF4946F9C39083C2068A08
-:1030900086A8000C408886A800EE83EA06ACB40A35
-:1030A000F6E4EBD0E8E00BF8C390AD4949894664FB
-:1030B000A9010074198BD883E3FA750AA904007476
-:1030C0000DB8E23FEB0BE8ECF4B8AA40EB03B838DC
-:1030D00044894662F8C38A86AF00A802740A24FDB8
-:1030E000E88DFB0C02E888FBF8C3AC49E881FCF8EA
-:1030F000C390AC49E879FCF8C390E85CF57505E845
-:10310000E6FDF8C3E8CDFD36A0B41324103410E872
-:10311000260136A1B413A901007405E8FEFEEB0EEA
-:10312000A90200740432C0EB02B001E8E8FE36A147
-:10313000B413E8AB0B36A1B413C1E805250100E8D0
-:103140000CFF36A0B5132410E82BFD32C0368A26BA
-:10315000B513F6C4047409FEC0F6C4087402FEC0B8
-:10316000E8EFFD36A1B613250F00E803FC36A1B643
-:1031700013C1E804250300E888FC36A1B613C1E8B2
-:1031800005250200E8CDFC36A1B613F6C40175048E
-:1031900032C0EB0980E402D0ECB0022AC4E88CFC17
-:1031A00036F606B713407405E88DFEEB03E894FE8F
-:1031B00036F606B713207405E869FEEB03E870FEE7
-:1031C000F8C3F8C38B4638A9040075230D040089A1
-:1031D000463883C2088B462E3B463C7314834E38D8
-:1031E000108A86A70024FE8886A700EE83EA08F8E6
-:1031F000C38A86A7000C01EBEE908B4638A9040029
-:10320000740625FBFF894638F8C3AD4949E8BEFB83
-:1032100089868E00F8C3AD4949E8B2FB89869000E3
-:10322000F8C3834E2604E892FAF8C390836626FB1F
-:10323000E888FAF8C390AC4984C07507808EA30073
-:1032400004F8C380A6A300FBF8C3AC4983C2083CC2
-:1032500002760232C03C017412770B8A86A70024E2
-:10326000EF8886A700EE83EA08F8C38A86A7000CD9
-:1032700010EBEE905283C206B0BFEE5283C204AC94
-:1032800049EE5A8A86A800EE5AF8C3905283C206C5
-:10329000B0BFEE5283C208EBE690AC49F8C3AC492C
-:1032A000E8B4EE7303E8F7EEF8C38A86AF00247F34
-:1032B000E8BDF9B8F000E866F2816626FFF3E8237E
-:1032C000FAE8D2F9F8C3B88000E837F2804E270850
-:1032D000E811FAE8C0F9F8C3B88000E841F2816665
-:1032E00026FFF7E8FEF9E8ADF9F8C390B81000E85A
-:1032F00011F2804E2704E8EBF9E89AF9F8C3B81008
-:1033000000E8FFF1816626FFFBE8D8F9F8C3AC4975
-:10331000F8C383C2068A86A8000C408886A800EEFF
-:1033200083EA06F8C39083C2068A86A80024BFEB0E
-:10333000EA90AC498AE080C20AEC80EA0AA82074CC
-:10334000058AC4EEF8C30651578B4E24E3344989ED
-:103350004E24FF461A8E46028B7E228AC4AA897E9C
-:10336000228B462624FD89462675298A86A500A833
-:1033700002752180C2020C028886A500EE80EA0256
-:10338000EB12C47E003B7E1E760A4F268825897E7E
-:1033900000FF461A5F5907F8C390ACAD83E9038577
-:1033A000C074053D00207205B8FFFFEB03C1E003C8
-:1033B0003B8694007426898694008BD85283C2067B
-:1033C0008A86A8008AE00C80EE83EA068AC3EE8330
-:1033D000C2028AC7EE83C2048AC4EE5AF8C3B08818
-:1033E0008886BC00E88CF233DB8A86A500A80274CC
-:1033F0000380CB01A805740380CB02A80874038066
-:10340000CB04F686A70010740380CB108A86A9002F
-:10341000F6C304750A83C20CEC83EA0CC0E8048A84
-:10342000E08A86AF00A8807408F6C401750380CBDB
-:1034300020F686A70002750AF74638040074038058
-:10344000CB40889EBE00FE86B400B00AE8F3DBF8ED
-:10345000C3FE86B400B00AE8E8DBF8C3AC493C021E
-:103460007437771084C07406804E3801F8C38066C4
-:1034700038FEF8C38B463825FFF7894638A9000483
-:1034800075EA8A86A500A80175E20C0583C2028848
-:1034900086A500EE83EA02F8C3814E3800088A86CA
-:1034A000A500A80174C624FAEBE2AD4949F8C3901F
-:1034B000E811FAFE86B900B00EE886DBF8C3B0FF6B
-:1034C000E8BFECF8C39083667AFBB000E873DBF8E2
-:1034D000C390AC49E853D9721136881E1A0136A040
-:1034E0008E120AC352BA0001EE5AF8C3AC4932E454
-:1034F00036A38612050600368B1E88122BD8368915
-:103500001E8A12F8C390AD8BD8AD83E90403C32B98
-:103510004676894678F7467A0200740A83667AFD11
-:10352000B80000E81CDBF8C3061607AC49250F00FD
-:103530006BC0098DBEFD0003F8AC49250F00AA85BC
-:10354000C074082BC8518BC8F3A459E827F0E8448D
-:103550000307F8C333C0AC4936A3B21336A3B01384
-:10356000F8C383667AEFE82C03F8C390834E7A1091
-:10357000EBF4E89BF0F8C390AD3C19770E3C19775B
-:103580000A8BF881E7FF0088A6C400F8C390834E39
-:103590002620AC4932E4D1E08BD8C1E30203C389D1
-:1035A000466E834E4804B006E897DA4946F9C39060
-:1035B000FE86B300B00AE889DAF8C39033C0AC499C
-:1035C0006BC00A89868A00F8C390AC4932E43D0A90
-:1035D000007705B80A00EB083D5A007203B85A009C
-:1035E00051F7D80564008BC88B4644F7E1B96400F5
-:1035F000F7F189464659F8C3AC49E885EBF8C39022
-:10360000AC4984C07507816638FFFDF8C3814E3828
-:103610000002F74638400075088A86A9008886AA05
-:1036200000F8C3905156E87F0C5E59F8C390FE86AF
-:10363000B600B00AE80BDAF8C390FE86B700B00A0D
-:10364000E8FFD9F8C390FE86B800B00AE8F3D9F8CD
-:10365000C39000905155AC2EA2523633C9AD8BF9B0
-:10366000C1E705A9010074232E8BAD4400837E08B9
-:103670000074182E803E523601740960B004E8BB15
-:103680000C61EB0760B0FBE8EC0C614747D1E875D3
-:10369000D24183F90472C65D5983E905F746384083
-:1036A000007405E887EAF8C3E88DEAF8C39036C6E7
-:1036B00006C81301F8C333C0AC4936A38012AC4925
-:1036C000362B068812F7D836A38212F8C390DE266E
-:1036D000DE26EC26F226F826FE2604270E271627DD
-:1036E0001E2726272E273427BE34C634D2343A2745
-:1036F000782780279427A027B427C027D427E0273E
-:10370000F42700281028EC34DE261E2826282C2832
-:10371000322838284E288A28063528359828BE2889
-:10372000D228DE28E628543562356C35EE28C029CB
-:10373000C829CE29E02972357835F029FC298E3543
-:10374000082A122A1C2AB035362ABC355A2A622A7F
-:10375000682ACA357C2AF835882AA62AB82ACC2AAB
-:10376000DE2AF22A00360A2B242B2436382B4C2B47
-:10377000842B2E363A3646365436E82BAE36402C5D
-:10378000622CB6367028DE26DE26D42EE82EF02EE9
-:10379000F82E002F0A2F122F1A2F222F2A2F422FF6
-:1037A000BE34C634D234502F8C2F942FA82FB42F70
-:1037B000C82FD42FE82FF42F083014301C30EC34ED
-:1037C000DE2624303030383044304C306230A43083
-:1037D00006352835AA30CE30D630EA30F2305435AE
-:1037E00062356C35FA30C231C231C431FA317235CA
-:1037F00078350A3216328E3522322C323632B035D6
-:103800004A32BC3574328C329A32CA359E32F8351F
-:10381000AA32C632D832EC32FE320E3300361233C0
-:103820002633243632339A33DE332E363A36463652
-:1038300054365C34AE36AA34B034B6368C30E32815
-:10384000F7463840007532E8E3E833C0AC493D5BE9
-:103850000077198BD8D1E32EFF97CE36720B85C92E
-:1038600075E88B4648E81A0CC34E41C36A001FC670
-:103870000693120C9C0EE863DAE8BCE833C0AC494E
-:103880003D5B0077E78BD8D1E32EFF97863772D95F
-:1038900085C975E8C3F7467A1000750F83BE8400AA
-:1038A000007408B8483A89868000C381BE8000EC65
-:1038B0003C74F783BE8800007505B8EC3CEBE7F775
-:1038C000467A080075401E608B8E88003B4E7477E8
-:1038D000333B4E78772EC47E108BDF26033D47475F
-:1038E00033C08ED88DB6F4008BC1F7467A010075CF
-:1038F0001DF3A4260107294678014676294674B0AF
-:103900000CE83ED7611FC78688000000EBACE3E3FC
-:103910005090AC247FAAE2FA58EBD8908B8E8800A6
-:10392000E3468B9E8A0085DB743EBA50FFED2B8602
-:1039300082003BC372378DB6F400C47E108BDF2645
-:10394000033D47478BC1161FF7467A01007524F3E4
-:10395000A4260107294678014676294674C7868839
-:10396000000000B00CE8DAD683667AF7C3B000E84E
-:10397000D0D6C3E3DC50AC247FAAE2FA58EBD29055
-:103980001E6033C08ED88DB6FD008B8688008B9666
-:1039900084003A0475108BDE468BC88DBEF400F3AC
-:1039A000A674668BF39083C6094A75E68DB6FD0052
-:1039B0008B9684003A0473108BDE468BC88DBEF460
-:1039C00000F3A674768BF39083C6094A75E68DB62C
-:1039D000F400ACF7467A01007402247F1EC55E1025
-:1039E0008B37884002468937FF4E78FF4676FF4E78
-:1039F000741F8B8E880049898E8800E3438DB6F44E
-:103A0000008BFE46F3A4E97DFFC576108B1C85DB99
-:103A1000740803F383C60383E6FE8B8684002BC2FF
-:103A2000B48089044646C7040000897610834E7A24
-:103A300004C78688000000611FF9C333C0611FC33B
-:103A4000B08084C0611FC3908B4E782B8E88007627
-:103A50002789B68C008B5E743BCB72028BCB3BC844
-:103A600072028BC88BC1E34433D28EC28BD183BE2A
-:103A70008800007406E98E0033C0C38B5E10031FFC
-:103A8000434352F7467A0100752AAC8DBEE4008BA1
-:103A90008E8600F2AE74348807434A75ED588B5E0B
-:103AA0001001072946780146762946748BC62B8675
-:103AB0008C00C390AC8DBEE4008B8E8600F2AE7499
-:103AC0000A247F8807434A75EBEBD28886F400C747
-:103AD0008688000100582BC2740E8B5E10010729E6
-:103AE000467801467629467440E894FE72BE4A75CF
-:103AF0001583BE8A000074B4BA50FFED8986820037
-:103B0000834E7A08EBA68DBEF40003BE8800A4FFA6
-:103B1000868800E86AFE729479064A748FE95BFF32
-:103B20004A74CEEBE19050E811CC8B467439467262
-:103B300074271E565133C9C5760CAD74107809032D
-:103B4000C805010024FE03F03B761076ED294E7681
-:103B5000014E78E837CC595E1F58C390C47E1026BA
-:103B60008B1D83C30326891D4B03FBAB91AAB803AE
-:103B700000294678014676294674C390C47E1026F3
-:103B80008B1D4326891D4303FBAAFF4E78FF467613
-:103B9000FF4E74C3E8E5FFC38081848582838687F6
-:103BA00050538ADC83E30ED1EB2E8A87983B08863C
-:103BB000B000FE86B100B00AE887D45B58C3508AD3
-:103BC000C8B8FF00E895FF58C3908A86BB00E8ABF1
-:103BD000FFC3E8CBFFE8F2FFC390E8C3FFE8B4FF00
-:103BE000C39033C0E895FFC3B8FF0033C9E86CFF4A
-:103BF000C390B8FF01B110E862FFC390C3FC3BE281
-:103C00003BF23BF23BFC3BE23BE83BE83BFC3BE26C
-:103C10003BE83BE83BFC3BE23BE23BE23B00100085
-:103C20000000100000001000000010000000100054
-:103C3000000010000000100000001000000008004C
-:103C40000000080000000800000008000051538B2D
-:103C50004E3881E1FFEEA804740481C900018AE0B6
-:103C600080E4032418D0E40AC433DB8AD82E8B877F
-:103C7000FD3B89467C2E0B8F1D3C894E38D1EB2EA7
-:103C80008AA73D3C5B59C3AC493C01721D74203C82
-:103C900003722374283C08722B74303C20723774F2
-:103CA0003ABBDA3B32E4895E7EC3BBA03BEBF5BB9B
-:103CB000943BB401EBF0BBFC3BB402EBE9BBE23B51
-:103CC000B403EBE2BBBE3BB404EBDBBBCA3BAC4989
-:103CD0008886BB00EBCEBBD23BEBF3BBFC3BEBC41B
-:103CE000A9040075D1A9080075DAEBD18B5E748B3D
-:103CF0004E783BCB72028BCB3BC872028BC88BC118
-:103D0000E32CC47E108BDF26033D4747F7467A013C
-:103D100000751CF7C70100740249A4D1E9F3A5732B
-:103D200001A4260107294678014676294674C35026
-:103D300053BB7F7FF7C70100740549AC22C3AAD1EA
-:103D4000E9E31D9CAD23C3AB497414AD23C3AB4958
-:103D5000740DAD23C3AB497406AD23C3ABE2E59D3F
-:103D60007304AC22C3AB5B58EBB8E8CEC98B5E38AA
-:103D7000F7C310047501C3F7C340007405E8B8E346
-:103D8000EB03E8A8E3816638EFFBF6C310743CF65A
-:103D9000C3027406E4D80C01E6D8F6C30474118398
-:103DA000C2088A86A7000C01EE8886A70083EA086D
-:103DB000F6C308740FE88BE3720A8A86C000E638FF
-:103DC000B023E60AF7C300047501C3F7C300087502
-:103DD000F98A86A500F6C340750DA81075EC0C1085
-:103DE0008886A500E60CC3A80175DF83C2020C0516
-:103DF000EE8886A500C3B000E847D2EB0FB002E81A
-:103E0000900EEB08836638DF834E7A0233C08ED87B
-:103E1000FAA0921240A292123C05721EC60692129D
-:103E200000FBB001E86B0EFAA1260123062A01A8C7
-:103E3000017507E8E207E8610990B000E837D2FBB6
-:103E400085ED74B9FAF7467A460075C08B46783D21
-:103E50000A0072B08B4E7483F950729A836638DF11
-:103E6000C576148B463A85C07558AD85C0750FE888
-:103E7000F8FEF7467A08007493E8A0FAEB8E3B76DA
-:103E8000047621B90200394E2E7705C7462E000070
-:103E9000568B762C897604C7040000464689762C1A
-:103EA000294E2E5E85C07917F6C4107405FF567C26
-:103EB000EB03FF567E897614B00CE885D1EB86893A
-:103EC000463AFF96800029463A897614B00CE8718C
-:103ED000D1E971FF0000000000000000080410029A
-:103EE00001200000000000000000000000000000B1
-:103EF00000000000808080808080808080808080C2
-:103F000080808080808080808080808080808080B1
-:103F100080808080808080808080808080808080A1
-:103F20008080808080808080808080808080808091
-:103F30008080808080C0C0C0C0C0C0C0C0C0C0C0C1
-:103F4000C0C0C0C0C0C0C0C0C0C0C0C0C0C0C080B1
-:103F500080808000808080808080808080808080E1
-:103F60008080808080808080808080808080808051
-:103F70008080808080808080808080808080808041
-:103F80008080808080808080808080808080808031
-:103F90008080808080808080808080808080808021
-:103FA0008080808080808080808080808080808011
-:103FB0008080808080808080808080808080808001
-:103FC00080808080808080808080808080808080F1
-:103FD000808080804E417841D041F44106421842B1
-:103FE000C3908E46028B7E22897E6C806627FD8B75
-:103FF000562483FA0472E983EA028BD93BCA76021B
-:104000008BCAB00A57518BFEF2AE8BC1595F751E39
-:1040100050402BC874062BD12BD9F3A4594B4A4AD4
-:10402000B00DAAA43BCA76028BCAE313EBD42BD9FA
-:10403000F7C601007402A449D1E9F3A57301A4896C
-:104040007E222B7E6C297E24017E1A8BCB807E26DD
-:10405000027405806626FDC360B0FDE8180361C3E5
-:10406000C390E87C0272F990834E26208B466A89C1
-:10407000466E8B46480D040025BFFF894648B006B2
-:10408000E8BFCFC3897E222B7E6C017E1A297E2455
-:10409000807E26027405836626FDC360B0FDE8D5E8
-:1040A0000261C3908ABEC200EB24F7464840007507
-:1040B000B18E46028B7E22897E6C8B562483EA0A5F
-:1040C000789E03D7806627FD33C08ABEC200E3B462
-:1040D0003BFA77B0AC49932E8A87D43E9322DF75A2
-:1040E00017AAE3A03BFA779CAC49932E8A87D43E6B
-:1040F0009322DF7503AAEBD6F6C37F7505FF4666EC
-:10410000EBDFF6C340750C8BD883EB08D1E32EFFB1
-:10411000A7D43FFF46662C20EBC785C0742C894688
-:104120006A834E4840897E222B7E6C017E1A297E4E
-:1041300024807E26027408836626FDE8A301C360FE
-:10414000B0FDE8310261E89801C3E957FF908B5E4A
-:10415000664B7803895E66AA8B5E64F7C3002075A0
-:1041600003E940FFF7C3400074088A86C100AAE94A
-:1041700032FFB83200EBA3908B5E66895E6883C322
-:104180000880E3F8895E668B5E6481E3001881FB3A
-:104190000018742DAA85DB7425F746644000751855
-:1041A00081FB0010740C8B46662B4668C1E004E965
-:1041B00068FFB86400E962FF8A86C100AAAAE9E341
-:1041C000FE518B4E662B4E68B020F3AA59E9D4FEFF
-:1041D0008B5E66895E688B5E64F7C324007410C7CB
-:1041E00046660000F7C304007405B00DAAB00AAA21
-:1041F000EB489090AAF7466400407406B8D007E9EF
-:1042000018FFE99FFE90AAF7466400807406B8D0B4
-:1042100007E906FFE98DFE908B5E66895E6885DBA7
-:10422000750C8B5E64F7C310007406E976FE8B5E36
-:1042300064F7C308007427B00AAAF7C32000751FEB
-:10424000F7C300017503E95BFEF7C340007506B8CC
-:104250006400E9C5FE8A86C100AAAAE946FEAAC78B
-:1042600046660000F7C3000674F1F7C340007419F6
-:104270008A86C10081E3000681FB00047206760293
-:10428000AAAAAAAAAAAAE91BFE81E3000681FB004A
-:1042900004720E7606B89600E97FFEB86400E979EC
-:1042A000FE8B4668E973FE90368B0EDA1283F93284
-:1042B000731D1E0633C08ED88EC08D764CBFDC12A7
-:1042C00003F9A5A5A583C106890EDA12071FC3B09D
-:1042D00008E86ECDC390836648FEE893C4E8C8FF43
-:1042E000C3F6462702750F9CFA837E1A0074098074
-:1042F0004E27019DF9C3F8C35052F7463840007469
-:104300001DE834DE83C20AECA840752783EA088AD8
-:1043100086A5000C028886A500EE5A58EBD1E80C61
-:10432000DE8A86A50024FB0C028886A500E60C5ACE
-:1043300058EBBC804E27025A589DF8C30846269C6D
-:10434000FA8A8EA500F7463840007514F6C1067447
-:1043500023E8D9DD8AC124F98886A500E60C9DC32F
-:10436000F6C102740FE8D0DD83C2028AC124FD8841
-:1043700086A500EE9DC38B5E2622C3884626740167
-:10438000C3806627FD9CFA8A8EA500F74638400058
-:104390007516F6C104750FE893DD8AC124FD0C047F
-:1043A0008886A500E60C9DC3F6C10275F9E888DD94
-:1043B00083C20AECA820750E83EA088AC10C028821
-:1043C00086A500EE9DC383EA0A33C98A4E1C8B463C
-:1043D0001A3BC8731B014E2A2BC189461A1EC5768B
-:1043E00000F36E1F89760083C2028A86A500EBCD9A
-:1043F00085C0741201462A8BC81EC57600F36E1F55
-:10440000897600894E1AF6C701752380CB02895E32
-:1044100026E808C383C2028A86A50024FDEE8886AA
-:10442000A500F6C7107505B002E816CC9DC383C27F
-:10443000028A86A500EB86908BD18B46243BC876FA
-:10444000028BC82BD12BC18BD9E322806627FD8E2E
-:1044500046028B7E22F7C601007402A449D1E9F31B
-:10446000A57301A4897E22894624015E1A8BCA8025
-:104470007E26027405806626FDC360B0FDE8F6FE68
-:1044800061C350E40A84C0750A8686A10084C074A2
-:104490000AE60A580C20894648F9C35824DF8946A1
-:1044A00048F8C390FBB002E8E807FAE82E01FBB039
-:1044B00001E8DE07FAB002E8BCCBFB85ED74E5FA53
-:1044C0008E5E0AFB90FA8B46488B7640A88C75DE90
-:1044D000A820741A50E855DC58E8A6FF7310B00203
-:1044E000E85FCBEBC99025FF008BC8EB3690A801A5
-:1044F00075224683E6FE3B76087479AD8AFCB3F0FC
-:1045000022FB3AFB74E03ABEA000742EE8D2FD73A1
-:1045100077EB9B908AE024FC8846488B4E4AF6C491
-:1045200002741DE8BBFD7286E813F3897640E393BD
-:10453000834E4803894E4AE974FF25FF0F8BC890CC
-:104540008B86980085C0741A518A8EA000C0E90439
-:10455000BA0100D3E25923C2740803F1897640E915
-:1045600061FFFF5662E3F5834E4801894E4A897622
-:1045700040E93AFF814E2600108B46503B46467775
-:1045800003E852FDE927FF9088BEA000EBAC0A06C5
-:1045900090128AE0BA0601B004EEEC84C07512B045
-:1045A00004EE8AC4EE32E4A8807406C706841200C2
-:1045B0000088269012C30A0690128AE0BA0601EC1F
-:1045C000A80175EDBA08018AC4EE32E4A88074E14E
-:1045D000C7068412000088269012C39036F706247E
-:1045E0000101007530368B0EDA1280F936732633EE
-:1045F000C08EC08ED8BFDC1203F9B008E877CA8538
-:10460000ED740E8D764CA5A5A580C10680F9367295
-:10461000E9890EDA12C3C390F7062601010075F688
-:104620008B0E201385C975EE33C08EC08ED8BF2483
-:1046300013B93600B00AE83DCA85ED7506E91201E6
-:10464000E90A0133DB8A464C8AA6B300FECC780E19
-:1046500088A6B3000ADCB40AAB83E90276E28AA634
-:10466000B200FECC780E88A6B2000ADCB408AB8398
-:10467000E90276CC8AA6B100FECC78188ABEB000DA
-:10468000750488A6B00088A6B1000ADC8AE7AB836F
-:10469000E90276AC8AA6B400FECC781F88A6B400E6
-:1046A0000ADCB40BAB8A86BC008AA6BD00AB8B8645
-:1046B000BE00AB83E90676888A464C8AA6B600FE21
-:1046C000CC781988A6B6000ADCB40CABE8DBCBAB1F
-:1046D0008B462AAB83E90676748A464C8AA6B700D5
-:1046E000FECC781988A6B7000ADCB40DABE8BACBCB
-:1046F000AB8B4634AB83E90676538A464C8AA6B820
-:1047000000FECC781988A6B8000ADCB40EABA15024
-:1047100012ABA15212AB83E90676328A464C8AA6C6
-:10472000B500FECC781888A6B5000ADCB40FAB8BB8
-:10473000869A00AB8B869C00AB83E906760F84DB00
-:104740007503E9EFFEB00AE8F8C8E9E7FEB00AE849
-:10475000F0C8F7D983C1368BC10D800086C4A3226F
-:10476000134141890E2013C3A184122BC17211A3DE
-:104770008412BE2213D1E9F36F90890E2013F8C37F
-:10478000F9C3C381EF6A1374F98BC70D800086C427
-:10479000A368134747893E6613C3F7062A01010041
-:1047A00075E08B0E6613E30780F92077D54949330E
-:1047B000C08EC08ED8BF6A138BF703F983C6343B13
-:1047C000FE77C0B00EE8AEC885ED74B78A464C8A55
-:1047D000B6B900FECE781588B6B9008AA6A90080C1
-:1047E000CCC0AB84F67405B00EE856C88AB6BA00E1
-:1047F000FECE78CB8A9EA9008ABEAB008A563F8A3D
-:10480000F332F70AB6AC00C686AC000022F2744B55
-:10481000F6C608740FB402F6C3087502B403AB8081
-:10482000E6F77437F6C601740FB400F6C3017502DB
-:10483000B401AB80E6FE7423F6C602740FB404F62E
-:10484000C3027502B405AB80E6FD740FF6C60474AE
-:104850000AB406F6C3047502B407ABC686BA0000F4
-:10486000889EAB00E958FF90A184122BC17211A35E
-:104870008412BE6813D1E9F36F90890E6613F8C3F2
-:10488000F9C3A1841241412BC17223A384128BC1AD
-:10489000484832E40C8086C4EF9090909090BEDC43
-:1048A000124949D1E9F36F90890EDA12F8C3F9C3BE
-:1048B0008AC88A464CB40183EB06EF9090909090A2
-:1048C000B80100EF90909090908AC1EF90909090F6
-:1048D00090E99700E9AC0033C08ED8891E8412C3DA
-:1048E000368B1E8412FB90FAB00CE889C785ED74F4
-:1048F000E6C5760C83FB1472DBFB90FAAD85C078BD
-:10490000AF74E28BFE03F8368B0E86123BC1770242
-:104910008BC883EB043BD977028BCB33C08A464CE0
-:10492000EF90909090908BC1EF90909090904180FC
-:10493000E1FE2BD951D1E9F36F90598BC74024FE8A
-:104940003BC674272BFE4E4E538B5E103BF3721307
-:10495000031F83C30380E3FEC7070000836E740256
-:10496000895E105B893C89760CEB8989760C3976F7
-:104970001077817208833C007403E977FFE80DBE6D
-:10498000E962FF36891E8412B00CE8B5C633C08ECA
-:10499000D8C3A184123D10007277BA04013B068887
-:1049A000127506C7067E1200008B0EDA12E30BE8C2
-:1049B000D0FE7257C7067E12FF7F8B0E2013E30BCB
-:1049C000E8A5FD7246C7067E12FF7F8B0E6613E3D5
-:1049D0000BE894FE7235C7067E12FF7FA12801A95D
-:1049E00001007503E8F9FE803E8D1200751DA1845B
-:1049F000123D200076153B0682127609A17E123BFD
-:104A0000068012720C800E901280C3B080FF167C5C
-:104A100012C3800E901240C36A001FC6069312177D
-:104A20009C0EE8B7C86A001FC6069312209C0EE8C9
-:104A3000AAC86A001FC6069312169C0EE89DC8906D
-:104A4000BA0601ECA82075CAFB90FABA0401ED90F1
-:104A5000909090903A06941277BE33DB8AD8D1E3D7
-:104A60002E8BAF4400C47E0885FF74B9F6C4C075B0
-:104A70005532C0C1E00280E4F08BF0ED9090909050
-:104A80009085C074BB8BC84180E1FE0BC68B5E5025
-:104A90004B4B2BD9789CAB8BC1404001464ED1E9A2
-:104AA000F36D90895E50897E088B462680E4EF89FD
-:104AB0004626F6C401750CF746480C007505B00291
-:104AC000E87FC5E97AFF86C48BC883E13F4180E176
-:104AD000FEE30A3C807209243FB4F0EBB0E960FFCA
-:104AE000253F0033FF8EC7BF96128BF7D1E9F36DD8
-:104AF000908BC8E848EDE947FF906A001FC606930F
-:104B0000121B9C0EE8D5C790601E0633C08ED88E4F
-:104B1000C0BA0601ECA80474E1B006EEECA28C1257
-:104B2000A8407411A18812A38412C6068D1200E851
-:104B300060FEA08C12A8807403E804FFB80080BA5D
-:104B400022FFEF071F61CF906A001FC60693121B5A
-:104B50009C0EE887C790601E0633C08ED88EC0BA00
-:104B60000601ECA80474E1BA0801ECA28C12A8407A
-:104B70007411A18812A38412C6068D1200E812FED9
-:104B8000A08C12A8807403E8B6FEB80080BA22FF99
-:104B9000EF071F61CF90EE86E0EE86E0EC86E0EC5A
-:104BA00086E080E1FEF36C9080E1FEF36E900500FC
-:104BB0007547A84B05007548A84B0500A348A84BAE
-:104BC00005003549A84B06009848964B0600BA48A0
-:104BD000964B0600C348964B0600CB48964B060002
-:104BE0002049964B06002849964B06004E4A9C4B9E
-:104BF00006007B4A9C4B05009E4AA24B0500EC4AEE
-:104C0000A24B00001E06833E4412007409A0060158
-:104C100024303C30741A8CC88ED88EC0BBAE4B8BFF
-:104C20000FE30D8B7F028B7704F3A483C306EBEFB6
-:104C3000071FC39033C0A33E01B90C01BE40018BD6
-:104C4000FE81C6B40F89048BC62BF13BC777F6A350
-:104C50003C01C3901E0660368B2E3E018B5E003BEE
-:104C6000EB742B8B7602891C89770236A13C018973
-:104C7000460036892E3C018BEBFF4E0674088B6E86
-:104C800000FF4E0675F836892E3E018B66046107DB
-:104C90001FC31E0660368B2E3E0198894606896624
-:104CA000043B6E0074108B6E00FF4E0675F836895B
-:104CB0002E3E018B660461071FC3C3901E06609CD5
-:104CC000FA33ED8EDD8B2E3C0185ED743D8B4E006D
-:104CD000890E3C018BCC8DA60A01561E06608966A2
-:104CE00004C746080F1AC7460601008B1E3E018501
-:104CF000DB741D8BC58707894600895E028BD889C6
-:104D00006F028BE19D61071FF8C39D61071FF9C307
-:104D1000892E3E01896E00896E0287E19D8BE1EB51
-:104D2000E4000D0A5465726D696E616C73207375D1
-:104D300070706F727465643A0D0A312920414E53C8
-:104D40004920636F6D70617469626C650D0A322968
-:104D500020577973652033300D0A506C6561736597
-:104D60002073656C6563743A20000D0A636F646597
-:104D7000207365676D656E743D000D0A4D6F6E6939
-:104D8000746F722076322E350A0D0A3E000D0A50DD
-:104D90006172646F6E3F000D0A4E6F206164647231
-:104DA00065737320737065636966696564000D0AD5
-:104DB0003A000D0A004C6F633D000D0A4641544114
-:104DC0004C204552524F523D000D0A4D6F6E697492
-:104DD0006F7220636F6D6D616E64733A2D0D0A20E2
-:104DE0002020442C645B5B787878783A5D7878781A
-:104DF000785D202D2064756D70206D656D6F727902
-:104E00000D0A2020204C2C6C5B5B787878783A5D1A
-:104E1000787878785D202D2064756D702073696EC8
-:104E2000676C65206C696E650D0A202020452C6535
-:104E30005B5B787878783A5D787878785D202D209B
-:104E400065646974206D656D6F72790D0A2020208C
-:104E5000462C665B5B78787878205D787878785D2A
-:104E6000202D2066696C6C206D656D6F72792070E5
-:104E70006172616772617068730D0A202020495B5E
-:104E8000787878785D202020202020202020202D78
-:104E900020776F726420696E7075742066726F6D12
-:104EA00020706F72740D0A202020695B7878787802
-:104EB0005D202020202020202020202D20627974B9
-:104EC0006520696E7075742066726F6D20706F72E8
-:104ED000740D0A2020204F78787878207878202068
-:104EE000202020202020202D206F757470757420C4
-:104EF000776F726420746F20706F72740D0A2020B7
-:104F0000206F787878782078782020202020202042
-:104F100020202D206F75747075742062797465205F
-:104F2000746F20706F72740D0A202020475B5B78CD
-:104F30007878783A5D787878785D2020202D206721
-:104F40006F746F20616464726573730D0A20202092
-:104F5000575B5B787878783A5D787878785D202050
-:104F6000202D207761746368206120776F72640D53
-:104F70000A20202043202020202020202020202024
-:104F800020202020202D20696E7465727275707447
-:104F900073206F66660D0A202020532020202020D9
-:104FA00020202020202020202020202D20696E7409
-:104FB00065727275707473206F6E0D0A20202073F5
-:104FC00020202020202020202020202020202020E1
-:104FD0002D2073696E676C6520737465700D0A20EF
-:104FE000202042787878782020202020202020203F
-:104FF0002020202D20627265616B706F696E7420B5
-:105000007365740D0A20202062202020202020209B
-:105010002020202020202020202D20627265616B1E
-:10502000706F696E7420636C6561720D0A202020B8
-:10503000522020202020202020202020202020203E
-:10504000202D207265737461727420627265616BC9
-:10505000706F696E740D0A2020207220202020209D
-:1050600020202020202020202020202D2072656755
-:105070006973746572732061742062726B70740D51
-:105080000A202020582C78206E202020202020204C
-:1050900020202020202D206578616D696E652063B9
-:1050A00068616E6E656C206E0D0A202020482C3FD2
-:1050B00020202020202020202020202020202D20E3
-:1050C00074686973206D657373616765001B5B327B
-:1050D0004A1B5B313B3148414E5349205465726D48
-:1050E000696E616C0D0A0A001B5B4B001B5B4A007A
-:1050F0001B5B324A1B5B313B3148001B5B44201B6E
-:105100005B44001B5B313B373248001B5B003B00BC
-:1051100048001B5B73001B5B75001B7A2B0B7F1B0E
-:105120007A2E0C7F1B7A2D087F1B7A2C0A7F1B7A24
-:1051300022087F1A57797365203330205465726DC9
-:10514000696E616C0D0A001B54001B59001A001E89
-:105150000008200800001B3D0000001B46000D0059
-:105160003F4464456546664767486849694F6F43F1
-:1051700063537342625272577758784C6C3C60D4D8
-:1051800057D45750585058D659D659B459B4593C99
-:10519000603C606C57485726570657905790579871
-:1051A00057485F0C5F585F335F405FA057A057FEC2
-:1051B00059FE59DC57DC5788619861C061CC61D8D1
-:1051C00061F66102622262F8564A625862605920B2
-:1051D00020666C6167733D00202061783D002020CF
-:1051E00062783D00202063783D00202064783D00F7
-:1051F000202063733D00202064733D0020206573F0
-:105200003D00202073733D00202064693D00202074
-:1052100073693D00202062703D00202073703D00C6
-:10522000202069703D00206368616E656C3D002040
-:105230002020207365673D002074695F7374723DA0
-:10524000002074695F746F733D002074695F6D6145
-:10525000783D002074695F6261733D002074695F6E
-:1052600073697A3D002074695F7374663D00207431
-:10527000695F726F6F3D002074695F666C673D0007
-:105280002074695F746F743D002072695F70636E93
-:105290003D002072695F7374723D002072695F7314
-:1052A00074663D002072695F726F6F3D0020726905
-:1052B0005F6261733D002072695F73697A3D00200F
-:1052C00072695F746F743D002072695F6D696E3D35
-:1052D000002072695F666C673D002072695F746FC1
-:1052E000733D002072695F7468723D002074685FCE
-:1052F0007374663D002074685F7374723D0020749F
-:10530000685F6261733D002074685F73697A3D0075
-:105310002074685F7472673D002074685F666C6714
-:105320003D002074685F636E743D002072685F7397
-:1053300074723D002072685F7374663D002072686D
-:105340005F6261733D002072685F73697A3D00207F
-:1053500072685F7370613D002072685F61736F3DBA
-:10536000002072685F726F6F3D002072685F666C2C
-:10537000673D00206D5F636172653D002070745F62
-:10538000666C6F3D002061735F666C6F3D0020723C
-:105390006D5F666C6F3D00202020715F696E3D007F
-:1053A0002020715F6F75743D0020715F6472616EC3
-:1053B0003D002020715F74696D3D00202020715FE9
-:1053C00066633D0020715F737461743D0020715FFE
-:1053D000646174613D0020715F6D6F646D3D0020FC
-:1053E00068616E645F6F3D002068616E645F623D5E
-:1053F000002068616E645F653D002068616E645FD7
-:10540000693D0020206F706F73743D002020746927
-:105410006D656F3D0020637573746D313D002063D1
-:105420007573746D323D0020637573746D643D0057
-:10543000207478726174653D0020727872617465C1
-:105440003D002020635F6D61703D0020635F6164FB
-:1054500064723D0020635F616973723D0020635F89
-:10546000787461673D0020635F646566723D00206B
-:10547000635F666C73683D002074786D6178733D7E
-:10548000002072695F656D733D002020635F6C735F
-:10549000723D002020635F6965723D002020635FDC
-:1054A0006663723D002020635F6D63723D002020C3
-:1054B000635F6C63723D002020635F6473733D0023
-:1054C00020635F647373693D0020635F647373726C
-:1054D0003D002020635F6973723D002020635F639D
-:1054E00061723D002020635F6566723D0020635F4E
-:1054F000657273743D0020635F65636E743D0020C8
-:10550000635F62726B633D0020635F626F6B633D3C
-:105510000020635F7265706C3D0020635F6363739E
-:10552000723D0020635F737474313D0020635F73CC
-:105530007474323D002BC08ED88EC0E8C200E8E5FE
-:1055400000FABF8400C705DC568C4D02BF0C00C7B3
-:10555000056E5E8C4D02BF0400C705BA5E8C4D021D
-:10556000E8F10090E84901E81600F490E8E500BE93
-:10557000BA4DE8090CA09312E85D0CE8C209EBE40F
-:10558000E8D50CE8C40C0AC074F68B1EF8793C0D03
-:10559000742E3C0874173C7F741383FB207FE188D2
-:1055A00087D67943891EF879E8770CEBD30BDB7447
-:1055B000CF4B891EF8798B36167AE8C10BEBC19078
-:1055C000E80200EBBBC687D679000BDB741EA0D6C1
-:1055D00079BF6051B91D008BD9060E07F2AE077571
-:1055E00017412BD9D1E32EFF977D519033C0A3F8FB
-:1055F00079BE894DE8870BC3BE8D4DE8800BEBEC7F
-:10560000BA0002B093EEB055EEBA1002B093EEB00D
-:10561000AAEEBA0002EC3C557508BA1002EC3CAA9E
-:105620007403E82FF6C3BA0402B01AEEB020EEB04D
-:1056300030EEB040EEB080EEBA0002B013EEB0072C
-:10564000EEBA0802B080EEBA0202B0BBEEBA0402B3
-:10565000B005EEC3C606CA1301C706F8790000C636
-:1056600006F67901C706D0790000C706D279000096
-:10567000C706D4790000C706FA790000C706FC798E
-:105680000000C706FE790000C706007A0000C706C2
-:10569000027ACE598C0E047AC706067A0000C70635
-:1056A000277A0000C606297A00C6062A7A00C39027
-:1056B000BE224DE8C80AE83F002C313C0177F7E8EC
-:1056C00081098B360C7AE8B50ABE6A4DE8AF0A0E3E
-:1056D00058E8F80ABE7A4DE8A40AC39060D1E38383
-:1056E000FB1873111EBA00008EDA2EFF97B7518B8C
-:1056F000EC8946101F61CF90E84F0B0AC07505E892
-:10570000560BEBF4C390833EF879017416BED7793B
-:10571000E8310A8BD0AC3C2C74043C207505E8239E
-:105720000AEEC3E9D2FE833EF8790174F6BED7795A
-:10573000E8110A8BD0AC3C2C74083C207404E9B707
-:10574000FE90E8FF09EFC3908B16067A833EF87946
-:1057500001740BBED779E8EB098BD0A3067AB02091
-:10576000E8570B8B16067AECE86F0BC38B16067A9C
-:10577000833EF87901740BBED779E8C7098BD0A3B3
-:10578000067AB020E8330B8B16067AEDE8670BC378
-:10579000FAC606F67900C390C606F67901FBC390F7
-:1057A00006E85809B020E8110B268B05E8470BB036
-:1057B00008E8060BE8030BE8000BE8FD0AB8010057
-:1057C000E8CFF4BA0202EC24017502EBDCBA06025F
-:1057D000EC07C390C706087A1000EB06C706087AE4
-:1057E0000100068E06FC798B3EFA79E80E09E80B7B
-:1057F00000893EFA798C06FC7907C390BEB24DE869
-:105800007C098B16087A52E82A09E80F0AE80C0A84
-:1058100033DBB9100090268A01E8BC09E8FD094392
-:10582000E2F4E8F709E8F40933DBB9100090268ABE
-:10583000013C2072053C7E760390B02EE8E30943DC
-:10584000E2ECBEB24DE8360983C7105A4A75B7C3B9
-:10585000068E06007A8B3EFE79E8A008893EFE7926
-:105860008C06007A578B360E7AE81209C706087A3A
-:105870001000BA0002E8E800E881FF5FBA0000E823
-:10588000DE00BEB54DE8F6088CC0E83F09B03AE846
-:1058900090098BC7E83509E87E08E8C30090E8B7AF
-:1058A00009E8A6090AC074F63C0B750683EF10EBF5
-:1058B00019903C0A750683C710EB0F903C0C7504D9
-:1058C00047EB07903C0875244F908B36FE798BC7C9
-:1058D0002BC63D000172A53D1001720483EE20909D
-:1058E00083C6108936FE79578BFEEB803C2E7508F7
-:1058F000BA0113E86A0007C3C6060A7A0232C990E1
-:105900003C30724C3C39760C245F3C4172423C4640
-:10591000773E2C072C3050E8CC085802C8FE0E0AFF
-:105920007A740FC0E104E82F09E81E090AC074F672
-:10593000EBCE26880DE8E0078AD0E823008AC13C38
-:105940002072053C7E760390B02EE8D508E970FF02
-:10595000E8C507E80A00268A05E87C08E91DFF90EB
-:10596000F606267A02750286F2528B361A7AE80D0E
-:10597000085A528AC60206247AF606267A01750665
-:10598000E89F08EB0D9032E4E80D088B361C7AE8AE
-:10599000EC075A8AC20206257AF606267A017506AF
-:1059A000E87F08EB069032E4E8ED078B361E7AE8D4
-:1059B000CC07C390068E06047A8B3E027AE83C0739
-:1059C000893E027A8C06047A07FF1E027AC3BE97CC
-:1059D0004DE8AA07CB900657BED779E866078BD863
-:1059E000E861078BC82BCB78118EC3BF0000B8FFCE
-:1059F000FF51B90800F3AB59E2F75F07C39006BE49
-:105A0000D779E83F078BD8D1E32E8B9F4400BE2681
-:105A100052E8F1088BC3E8DD08B80100E873F2E84A
-:105A2000E008BE2F52E8DD088B4718E8C808BE77AB
-:105A300052E8D1088B4726E8BC08BE5352E8C50897
-:105A40008B471EE8B008BE5C52E8B9088B4720E8D7
-:105A5000A408BE6E52E8AD088B4724E89808BE80C3
-:105A600052E8A1088B472AE88C08E89508BE38520E
-:105A7000E892088B07E87E08BE4152E887088B470A
-:105A80001AE87208BE4A52E87B088B471CE8660891
-:105A9000BE6552E86F088B4722E85A08E86308BEE3
-:105AA000D152E860088B4738E84B08BEAD52E85445
-:105AB000088B4730E83F08BEB652E848088B4732AB
-:105AC000E83308BEA452E83C088B472EE82708BEFE
-:105AD000BF52E830088B4734E81B08E82408BE8929
-:105AE00052E821088B4704E80C08BE9252E81508DA
-:105AF0008B4714E80008BE9B52E809088B472CE846
-:105B0000F407BEC852E8FD078B4736E8E807BEDA5F
-:105B100052E8F1078B473AE8DC07BEE352E8E507B5
-:105B20008B473CE8D007E8D907BE1953E8D6078B66
-:105B30004748E8C107BEFE52E8CA078B4742E8B5AE
-:105B400007BE0753E8BE078B4744E8A907BE7C534E
-:105B5000E8B2078B474CE89D07BE8553E8A6078B44
-:105B6000474EE89107BE8E53E89A078B4750E88569
-:105B700007E88E07BE2253E88B078B474AE8760773
-:105B8000BEEC52E87F078B4708E86A07BEF552E88B
-:105B900073078B4740E85E07BE1053E867078B47E3
-:105BA00046E85207E85B07BE6A53E858078B477A16
-:105BB000E84307BE3D53E84C078B4770E83707BE04
-:105BC0004653E840078B4772E82B07BE4F53E83433
-:105BD000078B4774E81F07E82807BE2B53E8250703
-:105BE0008B470CE81007BE3453E819078B4710E8C1
-:105BF0000407BE5853E80D078B4776E8F806BE61E8
-:105C000053E801078B4778E8EC06BE7353E8F506C6
-:105C10008B473EE8E006E8E906BE9753E8E6068BC8
-:105C20004752E8D106BEA053E8DA068B4754E8C5D0
-:105C300006BEA953E8CE068B4756E8B906BEB25356
-:105C4000E8C2068B4758E8AD06BEBB53E8B6068BE4
-:105C5000475AE8A106BEC453E8AA068B475CE895FC
-:105C600006E89E06BECD53E89B068B475EE8860697
-:105C7000BED653E88F068B4760E87A06BEDF53E84E
-:105C800083068B4762E86E06BEE853E877068B47CB
-:105C90007CE86206BEF153E86B068B477EE8560649
-:105CA000BEFA53E85F068B878000E84906E8520693
-:105CB000BE4254E84F068B879E00E83906BE035467
-:105CC000E842068B4764E82D06BE0C54E836068B86
-:105CD000476EE82106BE1554E82A068B878E00E839
-:105CE0001406BE1E54E81D068B879000E80706BE0A
-:105CF0002754E810068B879200E8FA05E80306BEF1
-:105D00003054E800068B879400E8EA05BE3954E871
-:105D1000F3058B879600E8DD05BE6F54E8E6058B3A
-:105D2000879800E8D005BE5D54E8D9058A87A000B1
-:105D3000E8A705BE5454E8CC058A4728E89B05BE71
-:105D40006654E8C0058A87A100E88E05E8B305BE61
-:105D50007854E8B0058A87A200E87E05BE8154E841
-:105D6000A3058A87A300E87105BE8A54E896058AD0
-:105D700087A400E86405BE9354E889058A87A500D6
-:105D8000E85705BE9C54E87C058A87A600E84A05CA
-:105D9000BEA554E86F058A87A700E83D05BEAE544E
-:105DA000E862058A87A800E83005E85505BEB754C3
-:105DB000E852058A87A900E82005BEC054E84505D9
-:105DC0008A87AA00E81305BEC954E838058A87AB5C
-:105DD00000E80605BED254E82B058A87AD00E8F935
-:105DE00004BEDB54E81E058A87AE00E8EC04BEE47E
-:105DF00054E811058A87AF00E8DF04BEED54E804DB
-:105E0000058A87B000E8D204E8F704BEF654E8F447
-:105E1000048A87B100E8C204BEFF54E8E7048A8719
-:105E2000B200E8B504BE0855E8DA048A87B300E892
-:105E3000A804BE1155E8CD048A87BB00E89B04E89E
-:105E4000C004BE1A55E8BD048A87BC00E88B04BEB6
-:105E50002355E8B0048A87BE00E87E04BE2C55E8CE
-:105E6000A3048A87BF00E87104E8960407C36006AC
-:105E70001E168BECFF4E16F7461A00027401FBB893
-:105E800000008ED88EC0892E2D7AE8CB0081661A4C
-:105E9000FFFEC6062A7A00E8D800B8005FA32B7A76
-:105EA000E85D00803E2A7A00740A814E1A0001C61D
-:105EB000062A7A00171F0761CF9060061E168BEC2A
-:105EC000F7461A00027401FBB800008ED88EC08914
-:105ED0002E2D7A81661AFFFEC6062A7A00E8920005
-:105EE000B8005FA32B7AE81700803E2A7A00740A74
-:105EF000814E1A0001C6062A7A00171F0761CF904B
-:105F0000B8F000E88CEDFF262B7AC390065356803C
-:105F10003E297A007403E83F00BED779E825028B5A
-:105F2000D8A3277A2E8A07A2297AB0CC2E88075EBA
-:105F30005B07C3C6062A7A00B80A5FA32B7AC39010
-:105F40008B2E2D7AE82B00C3C6062A7A01E80800BA
-:105F5000B80A5FA32B7AC39057803E297A00740F4A
-:105F60008B3E277AA0297A2E8805C606297A005FFB
-:105F7000C390BEB24DE80602BED851E80002FF76DB
-:105F80001458E84702BEDE51E8F301FF760E58E8E8
-:105F90003A02BEE451E8E601FF761258E82D02BE4F
-:105FA000EA51E8D901FF761058E82002BE1452E801
-:105FB000CC01FF760A58E81302BE1A52E8BF01FF6F
-:105FC000760C58E80602BECF51E8B201FF761A58A7
-:105FD000E8F901BEB24DE8A501BEF051E89F01FF0E
-:105FE000761858E8E601BEF651E89201FF760258AD
-:105FF000E8D901BEFC51E88501FF760458E8CC01E0
-:10600000BE0252E87801FF760058E8BF01BE085290
-:10601000E86B01FF760658E8B201BE0E52E85E0159
-:10602000FF760858E8A501BE2052E85101FF761618
-:1060300058E89801BE894DE84401C390BEC94DE8B7
-:106040003C01C33C0074053C017459C3C7060C7A7B
-:10605000CD50C7060E7AF050C706107AE850C70632
-:10606000127AEC50C706147AF450C706167AFB5021
-:10607000C706187A0351C7061A7A0B51C7061C7A4D
-:106080000E51C7061E7A1051C706207A1251C70654
-:10609000227A1651C606247A01C606257A01C6065A
-:1060A000267A03C3C7060C7A1A51C7060E7A4D51D9
-:1060B000C706107A4751C706127A4A51C706147AA2
-:1060C0004F51C706167A5151C706187A5551C7065F
-:1060D0001A7A5651C7061C7A5951C7061E7A5A5168
-:1060E000C706207A5B51C706227A5E51C606247A1B
-:1060F00020C606257A20C606267A02C3A1F879486A
-:106100007414BED779E83C008BF8AC3C3A75078E26
-:10611000C7E830008BF8C3908BC72B06FE798AF056
-:10612000240F8AD002D002D080C20BC0EE0480C6F9
-:1061300003043DC38CC0E89300B03AE8E4008BC789
-:10614000E88900C35133C990AC3C2074FB900AC06D
-:1061500074262C3072223C0976143C11721A2C07DA
-:106160003C0F760A3C2A72102C203C0F770A98C10B
-:10617000E10403C8ACEBD7904E8BC159C390068C99
-:10618000C88EC0E8020007C3268A04460AC0740607
-:10619000E88F00EBF390C3900BC0747A5133D2B9FF
-:1061A000E803F7F18BCAE803008BC159BA6400F623
-:1061B000F2E80C008AC498B20AF6F2E802008AC437
-:1061C000500AF074050430E8580058C386C4E80744
-:1061D0000086C4E80200C390C1C804E80800C1C03A
-:1061E00004E80200C3905350240FBBCA622ED7E8C4
-:1061F0003000585BC39086C4E8070086C4E80200FC
-:10620000C39050B908008AE032C0D1C00430E81110
-:1062100000E2F558C390B030E80700C3B020E801B1
-:1062200000C3568B36D0798884D0774681E6FF014B
-:10623000FF06D4798936D079813ED479FE0175087C
-:1062400056E814005EEBF1905EC3BA0202EC240142
-:106250007404BA0602ECC390803EF67900740960BB
-:10626000B80100E82CEA6190BA0202ECA804742894
-:106270008B36D279833ED47900741D8A84D07746D8
-:1062800081E6FF018936D279FF0ED479BA0602EE93
-:10629000BA0202ECA80475DCA1D479C352BA060292
-:1062A000EE5AC3905250BA0202ECA8047408585A2D
-:1062B000E8E9FFF9C390585AF8C35250BA0202EC09
-:1062C000A80474FB585AE8D3FFC330313233343555
-:1062D0003637383941424344454653508AE080E4DA
-:1062E0000FBBCA62C0E8042ED7E8CEFF8AC42ED7FF
-:1062F000E8C7FF585BC386E0E8DFFF86E0E8DAFF27
-:10630000C390BEB24D502EAC3C007405E8ABFFEB21
-:10631000F558C390C808000056578B7604BF040098
-:10632000C746FC0000C746FA0000C746F8000083D5
-:106330007E0600750E56E8B60E590BC075058BC764
-:10634000E95B018B46FC8946FE0BFF7505B8010031
-:10635000EB0233C05056E8A40D5959B4008946FCED
-:106360008B5EFC83FB087603E92B01D1E32EFFA7AC
-:10637000B264B80300E92601837EFA007414C746AC
-:10638000FA00008A445898508A44599850E8C20F3D
-:106390005959837EF800740AC746F8000056E89BF6
-:1063A0000859837E060075058BC7E9F10083FF0459
-:1063B0007503E9E6008BC7E9E400837EFE00750300
-:1063C000BF0200E9D500837EFE007503BF0100E92E
-:1063D000C9008B5EFE83FB077603E98600D1E32EBE
-:1063E000FFA7A26433FFE97F00BF0400807C580F41
-:1063F0007422837EF800751CFE44586A0856E87EB5
-:106400000C59598A445804805056E8720C5959C79F
-:1064100046FA0100837EF800740AC746F800005669
-:10642000E8190859EB42BF0400807C5800742283AD
-:106430007EF800751CFE4C586A0856E8410C595904
-:106440008A445804805056E8350C5959C746FA0119
-:1064500000837EF800740AC746F8000056E8DC079F
-:1064600059EB05BF0400EB00EB31BF0400EB2CC778
-:1064700046F801006A0856E8050C5959807C58090D
-:106480007D04B00FEB02B00004805056E8F00B59C9
-:1064900059BF0400EB05BF0400EB00E9A5FE5F5EF9
-:1064A000C9C3E4636364636463646364E963266427
-:1064B00051647863BA63C6639664D2636A646A643B
-:1064C0006F647263C808000056578B76048B7E0891
-:1064D0006A0156E8A90B59598A4606C0E0060480AD
-:1064E0005056E89A0B5959C746FE0000897EF8EBD2
-:1064F00003FF46FE8B5EF8FF46F8803F0075F2838F
-:106500007EFE107D25B810002B46FED1F88946FC92
-:10651000C746FA0000EB0B6A2056E8620B5959FF98
-:1065200046FA8B46FA3B46FC7CEDEB0C8BDF478A48
-:10653000075056E8490B5959803D0075EF6A0256DD
-:10654000E83C0B5959EB005F5EC9C3C80400005614
-:10655000578B7E04C746FE0000BE1400E909018B7C
-:106560005EFE83C3042BDF8A87AC0B88445AC64483
-:1065700058088A46FE884459C744060000C6441994
-:1065800000C6441A00C6441B00C6441D0DC6441E66
-:1065900003C6441F00C6442000C6442100C6445B15
-:1065A00000C6445D00C6445E00C6445F00C6446049
-:1065B00000C746FC0000EB0D8B5EFCD1E3C740300A
-:1065C0000000FF46FC837EFC107CEDC746FC00000B
-:1065D000EB0A8B5EFCC6405000FF46FC837EFC0449
-:1065E0007CF0C744540000C7445600008A445A98BF
-:1065F000BAF80023D0B805000BC28946FC9CFA8A81
-:1066000046FCBAFE00EEBA0000EC9D24088846FC69
-:10661000837EFC007502EB4AFF76FEE87A0C59682F
-:10662000350256E8320A59590BC07534683802569B
-:10663000E8250A59590BC0752768420256E8180A1E
-:1066400059590BC0751A684C0256E80B0A59590B78
-:10665000C0750D68560256E8FE0959590BC0740200
-:10666000EB00FF46FE83C662397EFE7D03E9EFFE46
-:10667000EB005F5EC9C3C808000056578B4604BADA
-:106680006200F7EA0514008BF0837E06007405B8FB
-:106690001000EB03B808008944048A460888445C6B
-:1066A00056E85904598BF88BC78944568944548A53
-:1066B000445D88442F0BFF751D68C20F6A0156E8C0
-:1066C00002FE83C406EB006A0156E847FC59590BE9
-:1066D000C075F4BF0100897EFAB90500BBE96A2ED6
-:1066E0008B073B46FA74074343E2F4E9A4032EFF09
-:1066F000670AC744060200C74408F4088B5E04D149
-:10670000E38B87FC0889440A33C08BF8894454E939
-:10671000800356E8BB0559BF01008A445D88446088
-:10672000E96F03837C04087530807C5C0175158AF1
-:10673000445DB400D1E08BD8FFB7E40856E8F70811
-:106740005959EB138A445DB400D1E08BD8FFB7C42C
-:106750000856E8E2085959EB2E807C5C0175158AD1
-:10676000445DB400D1E08BD8FFB7D40856E8C70821
-:106770005959EB138A445DB400D1E08BD8FFB7B40C
-:106780000856E8B20859596A0156E887FB59598BEF
-:10679000D883FB03772AD1E32EFFA7E16ABF01006C
-:1067A0008A445D88445EEB188A445D04FF240788B0
-:1067B000445DEB0C8A445DFEC0240788445DEB0019
-:1067C000E9CF028A445DB400D1E08BD8FFB7FD0267
-:1067D00056E863085959681D0356E85A0859596A1A
-:1067E0000156E82FFB59598BD883FB037736D1E349
-:1067F0002EFFA7D96ABF01008A445D88445FEB245D
-:106800008A445D04FF8A540480C2FF22C288445D2A
-:10681000EB128A445DFEC08A540480C2FF22C28803
-:10682000445DEB00E96B028B5C0683C3FED1E38B16
-:10683000400889048B1CFF77066A0056E885FC83B4
-:10684000C4068B5C064BD1E38B40088944028B5C09
-:1068500002FF77066A0156E86AFC83C4066A01569D
-:10686000E8B1FA59598BD883FB037603E91F02D1AB
-:10687000E32EFFA7D16A8B5C028B47048944028B0D
-:106880005C02803F44750D8B5C028A4701B4003B7B
-:1068900044047DE28B4604D1E08B1C03D88B440278
-:1068A0008947088B5C064BD1E38B4402894008E999
-:1068B000DE018B5C028B47028944028B5C02803FC5
-:1068C00044750D8B5C028A4701B4003B44047DE2B1
-:1068D0008B4604D1E08B1C03D88B44028947088B7C
-:1068E0005C064BD1E38B4402894008E9A201BF0159
-:1068F00000E99C018B5C028A07B4008946F8B90C58
-:1069000000BBA16A2E8B073B46F874074343E2F4B1
-:10691000E977012EFF67188B4604D1E08B5C0203F8
-:10692000D88B47088B5C06FF4406D1E38940088B6F
-:106930001C807F010074128B5C028A47018B1C8AC9
-:106940005701B6008BDA884018E94001FF4C06E990
-:106950003A018B5C028A47018B1C8A5701B6008B77
-:10696000DA884018E925018B5C028A47018B1C8A72
-:106970005701B6008BDA884018FF4C06E90D018BF1
-:106980005C028A47018B1C8A5701B6008BDA3040C3
-:1069900018E9F800B8F0108BF88944548A445F88ED
-:1069A000445DE9E7008A441C983D020074073D03FA
-:1069B000007402EB07C746FE0000EB2B8A441C98CC
-:1069C000D1E08BD8FFB7690256E86B0659596A01C6
-:1069D00056E840F959598946FE837EFE00740683C5
-:1069E0007EFE0375E9EB00837EFE0374628A441C1D
-:1069F00098D1E08BD8FFB76D0256E83A0659595640
-:106A0000E84D97598946FC8B5EFC83EBFE83FB03C4
-:106A10007733D1E32EFFA7996A68AC0256E81706D0
-:106A20005959EB23688F0256E80C065959EB186840
-:106A3000750256E801065959EB0D68C60256E8F68C
-:106A4000055959EB02EB006A0156E8C7F85959BFDE
-:106A50000100EB3868DD0256E8DC0559596A015639
-:106A6000E8B1F85959BF0100EB22B8D0308BF88952
-:106A700044548A446088445DEB12B8E0208BF88966
-:106A800044548A445E88445DEB02EB00EB02EB0069
-:106A9000EB00E941FC5F5EC9C3196A246A2F6A3AB8
-:106AA0006A0000010002000400410042004300446B
-:106AB00000800081008200FF001769546A7A6AA58D
-:106AC00069526994696A6A676952697F6967694C42
-:106AD00069F4687668B268EE68F56700681268F570
-:106AE000679D67A867B4679D6700000100F010E02C
-:106AF00020D0302768F266C36723671267C8040096
-:106B00000056578B76048A4459988946FC6A098B4B
-:106B100046FC05840150E8930859598BF88BC7252A
-:106B200000F03D001075558BC725F0003DF0007555
-:106B30004B8BC725000FC1F8088946FE8B44043BE8
-:106B400046FE7D0533C0E9EF008BC7250F00BA0F65
-:106B5000002BD03B56FE740533C0E9DB00C744026E
-:106B600004098A46FE88445F88445D8B5EFCD1E35D
-:106B7000C787FC080409B8F010E9BC008BC72500E2
-:106B8000F03D002075528BC725F0003DE0007548B0
-:106B90008BC725000FC1F8088946FE837EFE087E5C
-:106BA0000533C0E992008BC7250F00BA0F002BD028
-:106BB0003B56FE740533C0EB7F90C744020C098A34
-:106BC00046FE88445E88445D8B5EFCD1E3C787FC4B
-:106BD000080C09B8E020EB608BC72500F03D0030C1
-:106BE00075528BC725F0003DD00075488BC7250036
-:106BF0000FC1F8088946FE8B44043B46FE7D0433F2
-:106C0000C0EB358BC7250F00BA0F002BD03B56FECB
-:106C1000740433C0EB22C7440214098A46FE884438
-:106C20006088445D8B5EFCD1E3C787FC081409B81B
-:106C3000D030EB0433C0EB005F5EC9C3C806000070
-:106C4000568B76046A0856E8350459598A44580424
-:106C5000805056E8290459598B44543B4456750AD0
-:106C60008A445D3A442F7502EB648B445489445640
-:106C70008B5C028A470188442F8A445DB400C1E0DE
-:106C8000088B54540BD08A445DB400BB0F002BD842
-:106C90000BD38956FE6A108A445998050400990559
-:106CA000400183D2005250E8540883C4068956FC40
-:106CB0008946FA8B46FE0946FA834EFC006A19FFA4
-:106CC00076FCFF76FAE8730783C406E8FE075EC920
-:106CD000C3C81C000056578B5E048A4759988BF036
-:106CE0008B5E048A475DB4008946E6837EE6007DBC
-:106CF0000A8B5E048B4704488946E68B5E048B470B
-:106D0000043B46E67F05C746E600008B5E048A46E4
-:106D1000E688475D8BDED1E38B9F5902C647022090
-:106D20008BDED1E38B9F5902C64703308BDED1E364
-:106D30008B9F6102C64702208BDED1E38B9F6102ED
-:106D4000C64703308B46E68946FA837EFA007418FC
-:106D50008B46FABB0A0033D2F7F380C2308BDED108
-:106D6000E38B9F5902885703BB0A008B46FA33D244
-:106D7000F7F38946FA837EFA0074188B46FABB0A49
-:106D80000033D2F7F380C2308BDED1E38B9F590200
-:106D90008857028B46E68946FA837EFA0074188B80
-:106DA00046FABB0A0033D2F7F380C2308BDED1E360
-:106DB0008B9F6102885703BB0A008B46FA33D2F7D8
-:106DC000F38946FA837EFA0074188B46FABB0A00F0
-:106DD00033D2F7F380C2308BDED1E38B9F61028820
-:106DE00057028B5EE6D1E3FFB712026A00FF76041A
-:106DF000E8D1F683C40668D30F6A01FF7604E8C3BE
-:106E0000F683C406FF76E656E8019359598956F28F
-:106E10008946F0FF76E656E8149359598956EE896B
-:106E200046EC9CFAC45EF0268B078946EAC45EEC09
-:106E3000268B078946E8BA50FFED8946FE9DC74676
-:106E4000E40100E8EEA0BA50FFED8946FC8B46FC59
-:106E50002B46FE3DE8037303E980019CFABA50FF1C
-:106E6000ED8946FC8B46FC2B46FE8946F8C45EF055
-:106E7000268B072B46EA8946F6C45EF0268B0789E7
-:106E800046EAC45EEC268B072B46E88946F4C45ECE
-:106E9000EC268B078946E8BA50FFED8946FE9D81B6
-:106EA0007EF8E803761CFF76F8FF76F6E87601595F
-:106EB000598946F6FF76F8FF76F4E8680159598952
-:106EC00046F4BF0E00EB178BDED1E38B9F5902C651
-:106ED00001208BDED1E38B9F6102C601204783FF37
-:106EE0001176E48BDED1E38B9F5902C6470D308BC0
-:106EF000DED1E38B9F6102C6470D30837EF60977B2
-:106F000005B80D00EB26837EF6637705B80E00EB1F
-:106F10001B817EF6E7037705B80F00EB0F817EF645
-:106F20000F277705B81000EB03B811008BF8EB259D
-:106F30008B46F6BB0A0033D2F7F380C2308BDED12A
-:106F4000E38B9F590288114FBB0A008B46F633D260
-:106F5000F7F38946F6837EF60075D5837EF40977CC
-:106F600005B80D00EB26837EF4637705B80E00EBC1
-:106F70001B817EF4E7037705B80F00EB0F817EF4E9
-:106F80000F277705B81000EB03B811008BF8EB253D
-:106F90008B46F4BB0A0033D2F7F380C2308BDED1CC
-:106FA000E38B9F610288114FBB0A008B46F433D2FA
-:106FB000F7F38946F4837EF40075D58BDED1E3FFC9
-:106FC000B75902FF7604E86E0059598BDED1E3FF12
-:106FD000B76102FF7604E85E0059596A00FF760443
-:106FE000E831F359598BD883FB04771FD1E32EFF87
-:106FF000A71B70EB22C746E40000FF4EE6EB0CC770
-:1070000046E40000FF46E6EB02EB00837EE40074FA
-:1070100003E92AFEE9D4FC5F5EC9C3F36FF56FFF95
-:107020006FF36F0970558BEC8B4604B9E803F7E1F9
-:107030008B4E06F7F15DC3558BEC568B7606EB0E47
-:107040008BDE468A0750FF7604E833005959803CAE
-:107050000075EDEB005E5DC3558BEC568B7606EB51
-:10706000148BDE468A0750FF7604E8450059590B19
-:10707000C07402EB07803C0075E7EB005E5DC3C89F
-:10708000020000568B76048A445A988946FE9CFA80
-:107090008A46FEBAFE00EEBA0200ECA80274069D13
-:1070A000E8919EEBE9BA00008A4606EE9DEB005E91
-:1070B000C9C3C8040000568B76048A445A9889468E
-:1070C000FEE8E6A18946FCE8E0A12B46FC3DB80BB2
-:1070D0007605B80100EB239CFA8A46FEBAFE00EE64
-:1070E000BA0200ECA80274069DE8489EEBD9BA00EB
-:1070F000008A4606EE9D33C0EB005EC9C3C804009B
-:107100000056578B7604837E0600740756E8030109
-:1071100059EB0556E8A200598846FF807EFF0877A4
-:10712000068A46FFE98400807EFF0F7603EB7990A4
-:107130008A46FFB4002D0A008BD883FB047767D101
-:10714000E32EFFA7AF71B000EB6156E86B0059B4B6
-:1071500000250F008946FC56E85E0059B4008BF804
-:1071600056E8550059B400C1E0088BD703D08BFA1C
-:107170008B5EFCD1E3897830EB2E56E83B005988D2
-:10718000445BEB2456E831005988445056E8290006
-:107190005988445156E821005988445256E819004C
-:1071A00059884453EB02EB00E95BFF5F5EC9C346BD
-:1071B00071A6714A717A718471C8040000568B7689
-:1071C000048A445A988946FE9CFA8A46FEBAFE0012
-:1071D000EEBA0200ECA80175069DE8579DEBE9BAEE
-:1071E0000000EC8846FD9D8A46FDEB005EC9C3C8E1
-:1071F000020000568B76048A445A988946FE9CFA0F
-:107200008A46FEBAFE00EEBA0200EC32E424019D8A
-:107210005EC9C3C8060000568B76048A445A988912
-:1072200046FEE885A08946FAE87FA02B46FA3DB8DD
-:107230000B7604B008EB249CFA8A46FEBAFE00EEF8
-:10724000BA0200ECA80175069DE8E89CEBDABA00EA
-:1072500000EC8846FD9D8A46FDEB005EC9C3558B58
-:10726000EC568B56048A4606EE33F6EB035058462E
-:1072700083FE147CF85E5DC3C8020000568B560482
-:10728000EC8846FF33F6EB0350584683FE147CF837
-:107290008A46FFEB005EC9C3C802000056578B76D2
-:1072A00004833EB00B00751FBA8801B000EEBA86A9
-:1072B00001B000EE6A096A00683001E87D0183C40C
-:1072C00006C706B00B01006A098BC605800150E8AD
-:1072D000DA0059598BF88BC7C1E80C250F00894695
-:1072E000FE8BC7C1E808250F008B56FE83F20C3BCE
-:1072F000C275218BC7C1E804250F008B56FE83F2AF
-:10730000063BC2750F8BC7250F008B56FE83F20913
-:107310003BC2740D6A0756E838005959C746FE0744
-:10732000008A46FE0480A233028BC6BA6200F7EAE6
-:107330008A56FE8BD888976C006832028BC6BA6278
-:1073400000F7EA05140050E80EFD5959EB005F5EA6
-:10735000C9C3C8020000568B760683E60F8BC6C1F0
-:10736000E00C8BD683F20CC1E2080BC28BD683F201
-:1073700006C1E2040BC28BD683F2090BC28946FE1A
-:107380006A196A108B46049905400183D200525055
-:10739000E86B0183C4060B46FE83CA005250E89A8C
-:1073A0000083C406E82501EB005EC9C3558BEC568B
-:1073B0005733FF6A01688601E8A3FE5959B1102AC4
-:1073C0004E06D3660433F6EB2E817E0400807204F1
-:1073D000B001EB02B00050688801E881FE59596A9B
-:1073E00003688601E877FE59596A01688601E86DED
-:1073F000FE5959D16604463B76067CCD33F6EB2424
-:10740000D1E76A03688601E854FE59596A01688623
-:1074100001E84AFE5959688801E85CFE599825013F
-:10742000000BF84683FE107CD76A00688601E82DC1
-:10743000FE59598BC7EB005F5E5DC3558BEC565709
-:107440008B7E086A01688601E813FE5959B820004E
-:107450002BC750FF7606FF7604E8A20083C4068996
-:10746000560689460433F6EB47817E060080720C8F
-:107470007506837E04007204B001EB02B000506810
-:107480008801E8D9FD59596A03688601E8CFFD599A
-:10749000596A01688601E8C5FD59596A01FF7606F7
-:1074A000FF7604E8580083C40689560689460446D8
-:1074B0003BF77CB56A00688601E8A2FD59596A006D
-:1074C000688601E898FD59595F5E5DC3558BEC569F
-:1074D0006A01688601E886FD595933F6EB00688831
-:1074E00001E894FD59A80175088BC6463D64007CEF
-:1074F000ED6A00688601E865FD59595E5DC3C80400
-:1075000000008B46048B56068B4E08E306D1E0D173
-:10751000D2E2FA8946FC8956FE8B56FE8B46FCEB7E
-:1075200000C9C300000000000000000000000000CF
-:1075300050726576696F7573204D656E7500426592
-:1075400067696E00000000000000000000000000FD
-:10755000000000000000000000000000000000002B
-:10756000000000000000000000000000000000001B
-:10757000000000000000000000000000000000000B
-:1075800000000000000000000000000000000000FB
-:1075900000000000000000000000000000000000EB
-:1075A00000000000000000000000000000000000DB
-:1075B00000000000000000000000000000000000CB
-:1075C00000000000000000000000000000000000BB
-:1075D00000000000000000000000000000000000AB
-:1075E000000000000000000000000000000000009B
-:1075F000000000000000000000000000000000008B
-:10760000000000000000000000000000000000007A
-:10761000000000000000000000000000000000006A
-:10762000000000000000000000000000000000005A
-:10763000000000000000000000000000000000004A
-:10764000000000000000000000000000000000003A
-:10765000000000000000000000000000000000002A
-:10766000000000000000000000000000000000001A
-:10767000000000000000000000000000000000000A
-:1076800000000000000000000000000000000000FA
-:1076900000000000000000000000000000000000EA
-:1076A00000000000000000000000000000000000DA
-:1076B00000000000000000000000000000000000CA
-:1076C000000000000000000000000000506F727415
-:1076D000203000506F7274203100506F727420326D
-:1076E00000506F7274203300506F72742034005059
-:1076F0006F7274203500506F7274203600506F72B4
-:1077000074203700506F7274203800506F727420EC
-:107710003900506F727420313000506F7274203114
-:107720003100506F727420313200506F727420310A
-:107730003300506F727420313400506F72742031F6
-:1077400035009C01A301AA01B101B801BF01C60126
-:10775000CD01D401DB01E201EA01F201FA010202EA
-:107760000A02080000078100038080809F919591A4
-:107770009F000381848E95848484840003828484A2
-:107780008484958E8400048800B20BC60BDA0BEE5D
-:107790000B020C160C2A0C3E0C520C770C9C0CBEE7
-:1077A0000CE00C020D01802054657374205061734D
-:1077B000736564201F20507265737320800200017E
-:1077C00080204D697373696E67205278204461741C
-:1077D000611F205072657373208002000180204277
-:1077E00061642052782044617461201F20507265CA
-:1077F000737320800200018020586D7472204275DE
-:1078000073791F20507265737320800200018020FD
-:107810006E6F742063757272656E746C791F2020B0
-:10782000696D706C656D656E7465640200240D2F62
-:107830000D3A0D450D500D5B0D660D710D7C0D87DC
-:107840000D920D9D0DA80DB30DBE0DC90D53802CCD
-:107850003254442053862C334454522053822C33C8
-:10786000525453201F53812C3252442053852C32C2
-:1078700043442053832C334354532053842C3344A8
-:1078800053522053872C3252492702000180202076
-:10789000444344202D2070696E2032301F275385C9
-:1078A0002E31818263908081828384858687888956
-:1078B0008A8B8C8D8E8F27020001802020445352AA
-:1078C000202D2070696E2031311F2753842E318185
-:1078D000826390808182838485868788898A8B8C65
-:1078E0008D8E8F27020001802020435453202D20AD
-:1078F00070696E20341F2753832E318182639080FC
-:107900008182838485868788898A8B8C8D8E8F2758
-:107910000200018020205249202D2070696E203203
-:10792000321F2753872E3181826390808182838426
-:1079300085868788898A8B8C8D8E8F2702000180AF
-:107940002020445452202D2070696E20362F381F7D
-:107950002753862E3181826390808182838485863D
-:107960008788898A8B8C8D8E8F270200018020204A
-:10797000525453202D2070696E20351F2753822EBC
-:107980003181826390808182838485868788898A19
-:107990008B8C8D8E8F27020001802020527844200E
-:1079A0002D2070696E20321F2753812E30534D8158
-:1079B000826390808182838485868788898A8B8C84
-:1079C0008D8E8F27020001802020547844202D20A6
-:1079D00070696E20331F2753802E30534D81826390
-:1079E00090808182838485868788898A8B8C8D8E1E
-:1079F0008F27020001802020444344202D207069FD
-:107A00006E20351F2753852E3181826390808182BD
-:107A1000838485868788898A8B8C8D8E8F27020048
-:107A200001802020445352202D2070696E20351F84
-:107A30002753842E3181826390808182838485865E
-:107A40008788898A8B8C8D8E8F2702000180202069
-:107A5000435453202D2070696E20311F2753832EED
-:107A60003181826390808182838485868788898A38
-:107A70008B8C8D8E8F270200018020205249202D73
-:107A800020286E2E632E291F2753872E3181826373
-:107A900090808182838485868788898A8B8C8D8E6D
-:107AA0008F27020001802020445452202D2070692D
-:107AB0006E20321F2753862E31818263908081820F
-:107AC000838485868788898A8B8C8D8E8F27020098
-:107AD00001802020525453202D2070696E20371FC2
-:107AE0002753822E318182639080818283848586B0
-:107AF0008788898A8B8C8D8E8F27020001802020B9
-:107B0000527844202D2070696E20361F2753812E15
-:107B100030534D81826390808182838485868788FB
-:107B2000898A8B8C8D8E8F270200018020205478CB
-:107B300044202D2070696E20331F2753802E305330
-:107B40004D81826390808182838485868788898A3B
-:107B50008B8C8D8E8F27020001802020444344208F
-:107B60002D2070696E20351F202020202753852E60
-:107B700031818263888081828384858687270200A1
-:107B800001802020445352202D2070696E20351F23
-:107B9000202020202753842E318182638880818297
-:107BA0008384858687270200018020204354532048
-:107BB0002D2070696E20311F202020202753832E16
-:107BC0003181826388808182838485868727020051
-:107BD000018020205249202D20286E2E632E291F3F
-:107BE000202020202753872E318182638880818244
-:107BF00083848586872702000180202044545220F8
-:107C00002D2070696E20321F202020202753862EC1
-:107C10003181826388808182838485868727020000
-:107C200001802020525453202D2070696E20371F70
-:107C3000202020202753822E3181826388808182F8
-:107C40008384858687270200018020205278442083
-:107C50002D2070696E20361F202020202753812E72
-:107C600030534D8182638880818283848586872713
-:107C7000020001802020547844202D2070696E205D
-:107C8000331F202020202753802E30534D818263C4
-:107C90008880818283848586872702000180202056
-:107CA000444344202D2070696E2032301F20202054
-:107CB000202753852E318182638880818283848549
-:107CC000868727020001802020445352202D2070F7
-:107CD000696E2031311F202020202753842E3181CE
-:107CE0008263888081828384858687270200018061
-:107CF0002020435453202D2070696E20341F2020F3
-:107D000020202753832E318182638880818283845F
-:107D1000858687270200018020205249202D20706F
-:107D2000696E2032321F202020202753872E318178
-:107D30008263888081828384858687270200018010
-:107D40002020445452202D2070696E20362F381F79
-:107D5000202020202753862E3181826388808182D3
-:107D60008384858687270200018020205254532077
-:107D70002D2070696E20351F202020202753822E51
-:107D8000318182638880818283848586872702008F
-:107D900001802020527844202D2070696E20321FEF
-:107DA000202020202753812E30534D8182638880EC
-:107DB0008182838485868727020001802020547871
-:107DC00044202D2070696E20331F2020202027534F
-:107DD000802E30534D8182638880818283848586A2
-:107DE0008727020068049604B6033C040E04890346
-:107DF0005C03E20360088A08BE0738080E0895078E
-:107E00006C07E6071C057405FA05C404F004CC05EC
-:107E1000A00548057806C806420728065006180738
-:107E2000F006A0060000F408F408D40D04090409C3
-:107E30000409040942000C091C09E50D020014099B
-:107E40000409F40D43001C090C09050E0004040983
-:107E50001409120E2C092C092C092C0900003C09CC
-:107E60006C091E0E740974097409740900014C0927
-:107E70002C092D0E740974097409740900025C0937
-:107E80003C093D0E740974097409740900036C09F6
-:107E90004C094D0E7409740974097409FF002C090A
-:107EA0005C09000000058409EC095E0EF409F40980
-:107EB000F409F409000694097409680EAC0AAC0AC6
-:107EC000AC0AAC0A0007A4098409720EBC0ABC0AF9
-:107ED000BC0ABC0A0008B40994097C0ED40AD40A6E
-:107EE000D40AD40A000BC409A409830EFC0AFC0AB4
-:107EF000FC0AFC0A000CD409B409900E140B140BF4
-:107F0000140B140B0002E409C409A00E2C0B2C0B5B
-:107F10002C0B2C0B0400EC09D4090E00FF00740993
-:107F2000E40900008201FC09A40AAC0E8202040AE2
-:107F3000F409AF0E82030C0AFC09B20E8204140A83
-:107F4000040AB60E82051C0A0C0ABC0E8206240A1C
-:107F5000140AC00E82072C0A1C0AC40E8208340AB6
-:107F6000240AC80E82093C0A2C0ACC0E820A440A52
-:107F7000340AD10E82104C0A3C0AD60E820B540AE7
-:107F8000440ADB0E82115C0A4C0AE00E820C640A81
-:107F9000540AE50E82126C0A5C0AEA0E820D740A1B
-:107FA000640AEF0E820E7C0A6C0AF40E820F840AB9
-:107FB000740AFB0E82138C0A7C0A020F8214940A44
-:107FC000840A090F82159C0A8C0A100F8216A40AD3
-:107FD000940A170F8217F4099C0A1E0F8202B40A32
-:107FE000B40A260F8203AC0AAC0A2D0F8200C40A21
-:107FF000CC0A340F8201CC0ABC0A3F0F8202BC0AB1
-:10800000C40A4D0F8200DC0AF40A590F8201E40A07
-:10801000D40A630F8202EC0ADC0A6E0F8203F40AB0
-:10802000E40A7A0F8204D40AEC0A870F8200040B58
-:108030000C0B930F82010C0BFC0A9B0F8202FC0AB3
-:10804000040BA70F82001C0B240BB00F8201240B22
-:10805000140BB50F8202140B1C0BBE0F4400340B23
-:10806000A40B9C0144013C0B2C0BA3014402440BC8
-:10807000340BAA0144034C0B3C0BB1014404540BD8
-:10808000440BB80144055C0B4C0BBF014406640B68
-:10809000540BC60144076C0B5C0BCD014408740BF8
-:1080A000640BD40144097C0B6C0BDB01440A840B88
-:1080B000740BE201440B8C0B7C0BEA01440C940B17
-:1080C000840BF201440D9C0B8C0BFA01440EA40BA3
-:1080D000940B0202440F2C0B9C0B0A02171F0F2F4C
-:1080E0000000018078783A20747820637073202A29
-:1080F0002A2A2A2A0200018078783A20747820639C
-:108100007073202A2A2A2A2A0200018078783A20CD
-:10811000747820637073202A2A2A2A2A0200018098
-:1081200078783A20747820637073202A2A2A2A2AC1
-:10813000020001C078783A20726320637073202AAD
-:108140002A2A2A2A020001C078783A207263206322
-:108150007073202A2A2A2A2A020001C078783A203D
-:10816000726320637073202A2A2A2A2A020001C01F
-:1081700078783A20726320637073202A2A2A2A2A88
-:1081800002000180496E7374616C6C204C6F6F70DB
-:108190006261636B1F5072657373208020746F205F
-:1081A000737461727402000180204361626C652007
-:1081B000746F2052656D6F74651F50726573732004
-:1081C0008020746F20737461727402000180204CEF
-:1081D0006F63616C204C6F6F706261636B201F2056
-:1081E0002052756E6E696E67202E2E2E0200018061
-:1081F00052656D6F7465204C6F6F706261636B20A8
-:108200001F202052756E6E696E67202E2E2E020082
-:10821000018020496E74726E6C204C6F6F706261C9
-:10822000636B1F202052756E6E696E67202E2E2E96
-:10823000020001805472616E736D69742050617424
-:108240007465726E1F202052756E6E696E67202EE7
-:108250002E2E020001802020303A2027438000018A
-:10826000802020313A202743810001802020323AAB
-:10827000202743820001802020333A2027438300B7
-:1082800001802020343A20274384000180202035BB
-:108290003A202743850001802020363A2027438654
-:1082A0000001802020373A202743870001802020CA
-:1082B000383A202743880001802020393A2027437C
-:1082C000890001802031303A2027438A0001802034
-:1082D00031313A2027438B0001802031323A202768
-:1082E000438C0001802031333A2027438D000180E8
-:1082F0002031343A2027438E0001802031353A2046
-:1083000027438F002A2A204D61696E20204D656E1B
-:1083100075202A2A004D6F6E69746F72206120509B
-:108320006F7274004D6F6E69746F722061205369B3
-:10833000676E616C00457374696D617465204350AC
-:108340005300446961676E6F7374696373004C6FA7
-:1083500063616C204C6F6F706261636B0052656D7E
-:108360006F7465204C6F6F706261636B00496E744F
-:10837000726E6C204C6F6F706261636B005472613F
-:108380006E736D6974205061747465726E00426121
-:10839000756420526174650044617461204269749F
-:1083A000730053746F702042697473005061726976
-:1083B00074790044617461205061747465726E0058
-:1083C000547820466C6F7720436F6E74726F6C0028
-:1083D000506F7274204E756D6265720035300037D3
-:1083E0003500313130003133342E35003135300035
-:1083F00032303000333030003630300031323030FF
-:10840000003138303000323030300032343030001B
-:1084100033363030003438303000373230300039C5
-:108420003630300031392C3230300033382C343093
-:10843000300035362C3030300035372C36303000B7
-:1084400036342C3030300037362C38303000313173
-:10845000352C323030003720626974730038206266
-:1084600069747300312073746F7020626974003115
-:108470002E352073746F702062697473003220731C
-:10848000746F702062697473006E6F20706172691E
-:108490007479006F64642070617269747900657624
-:1084A000656E207061726974790073706163652014
-:1084B000706172697479006D61726B2070617269AC
-:1084C000747900436F6C756D6E7300426172626502
-:1084D0007220506F6C650055555555552E2E2E0047
-:1084E0004E6F6E6500586F6E2F586F66660043546E
-:1084F00053005072657373208020666F72206D6523
-:108500006E750028636F756E74696E672E2E2E2946
-:108510000000654E64204F6620436F4465000000F4
-:10852000000000000000000000000000000000004B
-:10853000000000000000000000000000000000003B
-:10854000000000000000000000000000000000002B
-:10855000000000000000000000000000000000001B
-:10856000000000000000000000000000000000000B
-:1085700000000000000000000000000000000000FB
-:1085800000000000000000000000000000000000EB
-:1085900000000000000000000000000000000000DB
-:1085A00000000000000000000000000000000000CB
-:1085B00000000000000000000000000000000000BB
-:1085C00000000000000000000000000000000000AB
-:1085D000000000000000000000000000000000009B
-:1085E000000000000000000000000000000000008B
-:1085F000000000000000000000000000000000007B
-:00000001FF
-/* Intelliport II loadware */
-/* -31232 bytes read from ff.lod */
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 074923ce593..f0cf934ba87 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -1576,9 +1576,14 @@ cifs_readv_callback(struct mid_q_entry *mid)
/* result already set, check signature */
if (server->sec_mode &
(SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) {
- if (cifs_verify_signature(rdata->iov, rdata->nr_iov,
- server, mid->sequence_number + 1))
- cERROR(1, "Unexpected SMB signature");
+ int rc = 0;
+
+ rc = cifs_verify_signature(rdata->iov, rdata->nr_iov,
+ server,
+ mid->sequence_number + 1);
+ if (rc)
+ cERROR(1, "SMB signature verification returned "
+ "error = %d", rc);
}
/* FIXME: should this be counted toward the initiating task? */
task_io_account_read(rdata->bytes);
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index cbe709ad666..781025be48b 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -356,19 +356,12 @@ cifs_create_get_file_info:
cifs_create_set_dentry:
if (rc != 0) {
cFYI(1, "Create worked, get_inode_info failed rc = %d", rc);
+ CIFSSMBClose(xid, tcon, *fileHandle);
goto out;
}
d_drop(direntry);
d_add(direntry, newinode);
- /* ENOENT for create? How weird... */
- rc = -ENOENT;
- if (!newinode) {
- CIFSSMBClose(xid, tcon, *fileHandle);
- goto out;
- }
- rc = 0;
-
out:
kfree(buf);
kfree(full_path);
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 7354877fa3b..cb79c7edecb 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -124,10 +124,10 @@ cifs_fattr_to_inode(struct inode *inode, struct cifs_fattr *fattr)
{
struct cifsInodeInfo *cifs_i = CIFS_I(inode);
struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
- unsigned long oldtime = cifs_i->time;
cifs_revalidate_cache(inode, fattr);
+ spin_lock(&inode->i_lock);
inode->i_atime = fattr->cf_atime;
inode->i_mtime = fattr->cf_mtime;
inode->i_ctime = fattr->cf_ctime;
@@ -148,9 +148,6 @@ cifs_fattr_to_inode(struct inode *inode, struct cifs_fattr *fattr)
else
cifs_i->time = jiffies;
- cFYI(1, "inode 0x%p old_time=%ld new_time=%ld", inode,
- oldtime, cifs_i->time);
-
cifs_i->delete_pending = fattr->cf_flags & CIFS_FATTR_DELETE_PENDING;
cifs_i->server_eof = fattr->cf_eof;
@@ -158,7 +155,6 @@ cifs_fattr_to_inode(struct inode *inode, struct cifs_fattr *fattr)
* Can't safely change the file size here if the client is writing to
* it due to potential races.
*/
- spin_lock(&inode->i_lock);
if (is_size_safe_to_change(cifs_i, fattr->cf_eof)) {
i_size_write(inode, fattr->cf_eof);
@@ -859,12 +855,14 @@ struct inode *cifs_root_iget(struct super_block *sb)
if (rc && tcon->ipc) {
cFYI(1, "ipc connection - fake read inode");
+ spin_lock(&inode->i_lock);
inode->i_mode |= S_IFDIR;
set_nlink(inode, 2);
inode->i_op = &cifs_ipc_inode_ops;
inode->i_fop = &simple_dir_operations;
inode->i_uid = cifs_sb->mnt_uid;
inode->i_gid = cifs_sb->mnt_gid;
+ spin_unlock(&inode->i_lock);
} else if (rc) {
iget_failed(inode);
inode = ERR_PTR(rc);
@@ -1110,6 +1108,15 @@ undo_setattr:
goto out_close;
}
+/* copied from fs/nfs/dir.c with small changes */
+static void
+cifs_drop_nlink(struct inode *inode)
+{
+ spin_lock(&inode->i_lock);
+ if (inode->i_nlink > 0)
+ drop_nlink(inode);
+ spin_unlock(&inode->i_lock);
+}
/*
* If dentry->d_inode is null (usually meaning the cached dentry
@@ -1166,13 +1173,13 @@ retry_std_delete:
psx_del_no_retry:
if (!rc) {
if (inode)
- drop_nlink(inode);
+ cifs_drop_nlink(inode);
} else if (rc == -ENOENT) {
d_drop(dentry);
} else if (rc == -ETXTBSY) {
rc = cifs_rename_pending_delete(full_path, dentry, xid);
if (rc == 0)
- drop_nlink(inode);
+ cifs_drop_nlink(inode);
} else if ((rc == -EACCES) && (dosattr == 0) && inode) {
attrs = kzalloc(sizeof(*attrs), GFP_KERNEL);
if (attrs == NULL) {
@@ -1241,9 +1248,10 @@ cifs_mkdir_qinfo(struct inode *inode, struct dentry *dentry, umode_t mode,
* setting nlink not necessary except in cases where we failed to get it
* from the server or was set bogus
*/
+ spin_lock(&dentry->d_inode->i_lock);
if ((dentry->d_inode) && (dentry->d_inode->i_nlink < 2))
set_nlink(dentry->d_inode, 2);
-
+ spin_unlock(&dentry->d_inode->i_lock);
mode &= ~current_umask();
/* must turn on setgid bit if parent dir has it */
if (inode->i_mode & S_ISGID)
diff --git a/fs/cifs/link.c b/fs/cifs/link.c
index 09e4b3ae456..e6ce3b11287 100644
--- a/fs/cifs/link.c
+++ b/fs/cifs/link.c
@@ -433,7 +433,9 @@ cifs_hardlink(struct dentry *old_file, struct inode *inode,
if (old_file->d_inode) {
cifsInode = CIFS_I(old_file->d_inode);
if (rc == 0) {
+ spin_lock(&old_file->d_inode->i_lock);
inc_nlink(old_file->d_inode);
+ spin_unlock(&old_file->d_inode->i_lock);
/* BB should we make this contingent on superblock flag NOATIME? */
/* old_file->d_inode->i_ctime = CURRENT_TIME;*/
/* parent dir timestamps will update from srv
diff --git a/fs/cifs/smb2misc.c b/fs/cifs/smb2misc.c
index a4ff5d54755..e4d3b996416 100644
--- a/fs/cifs/smb2misc.c
+++ b/fs/cifs/smb2misc.c
@@ -52,7 +52,8 @@ check_smb2_hdr(struct smb2_hdr *hdr, __u64 mid)
cERROR(1, "Bad protocol string signature header %x",
*(unsigned int *) hdr->ProtocolId);
if (mid != hdr->MessageId)
- cERROR(1, "Mids do not match");
+ cERROR(1, "Mids do not match: %llu and %llu", mid,
+ hdr->MessageId);
}
cERROR(1, "Bad SMB detected. The Mid=%llu", hdr->MessageId);
return 1;
@@ -107,7 +108,7 @@ smb2_check_message(char *buf, unsigned int length)
* ie Validate the wct via smb2_struct_sizes table above
*/
- if (length < 2 + sizeof(struct smb2_hdr)) {
+ if (length < sizeof(struct smb2_pdu)) {
if ((length >= sizeof(struct smb2_hdr)) && (hdr->Status != 0)) {
pdu->StructureSize2 = 0;
/*
@@ -121,15 +122,15 @@ smb2_check_message(char *buf, unsigned int length)
return 1;
}
if (len > CIFSMaxBufSize + MAX_SMB2_HDR_SIZE - 4) {
- cERROR(1, "SMB length greater than maximum, mid=%lld", mid);
+ cERROR(1, "SMB length greater than maximum, mid=%llu", mid);
return 1;
}
if (check_smb2_hdr(hdr, mid))
return 1;
- if (hdr->StructureSize != SMB2_HEADER_SIZE) {
- cERROR(1, "Illegal structure size %d",
+ if (hdr->StructureSize != SMB2_HEADER_STRUCTURE_SIZE) {
+ cERROR(1, "Illegal structure size %u",
le16_to_cpu(hdr->StructureSize));
return 1;
}
@@ -161,8 +162,9 @@ smb2_check_message(char *buf, unsigned int length)
if (4 + len != clc_len) {
cFYI(1, "Calculated size %u length %u mismatch mid %llu",
clc_len, 4 + len, mid);
- if (clc_len == 4 + len + 1) /* BB FIXME (fix samba) */
- return 0; /* BB workaround Samba 3 bug SessSetup rsp */
+ /* server can return one byte more */
+ if (clc_len == 4 + len + 1)
+ return 0;
return 1;
}
return 0;
diff --git a/fs/cifs/smb2pdu.h b/fs/cifs/smb2pdu.h
index f37a1b41b40..c5fbfac5d57 100644
--- a/fs/cifs/smb2pdu.h
+++ b/fs/cifs/smb2pdu.h
@@ -87,10 +87,6 @@
#define SMB2_PROTO_NUMBER __constant_cpu_to_le32(0x424d53fe)
-#define SMB2_HEADER_SIZE __constant_le16_to_cpu(64)
-
-#define SMB2_ERROR_STRUCTURE_SIZE2 __constant_le16_to_cpu(9)
-
/*
* SMB2 Header Definition
*
@@ -99,6 +95,9 @@
* "PDU" : "Protocol Data Unit" (ie a network "frame")
*
*/
+
+#define SMB2_HEADER_STRUCTURE_SIZE __constant_le16_to_cpu(64)
+
struct smb2_hdr {
__be32 smb2_buf_length; /* big endian on wire */
/* length is only two or three bytes - with
@@ -140,6 +139,9 @@ struct smb2_pdu {
* command code name for the struct. Note that structures must be packed.
*
*/
+
+#define SMB2_ERROR_STRUCTURE_SIZE2 __constant_le16_to_cpu(9)
+
struct smb2_err_rsp {
struct smb2_hdr hdr;
__le16 StructureSize;
diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c
index 83867ef348d..d9b639b95fa 100644
--- a/fs/cifs/transport.c
+++ b/fs/cifs/transport.c
@@ -503,13 +503,16 @@ cifs_check_receive(struct mid_q_entry *mid, struct TCP_Server_Info *server,
/* convert the length into a more usable form */
if (server->sec_mode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) {
struct kvec iov;
+ int rc = 0;
iov.iov_base = mid->resp_buf;
iov.iov_len = len;
/* FIXME: add code to kill session */
- if (cifs_verify_signature(&iov, 1, server,
- mid->sequence_number + 1) != 0)
- cERROR(1, "Unexpected SMB signature");
+ rc = cifs_verify_signature(&iov, 1, server,
+ mid->sequence_number + 1);
+ if (rc)
+ cERROR(1, "SMB signature verification returned error = "
+ "%d", rc);
}
/* BB special case reconnect tid and uid here? */
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index fa217607c58..c57e064666e 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -84,7 +84,6 @@ header-y += capability.h
header-y += capi.h
header-y += cciss_defs.h
header-y += cciss_ioctl.h
-header-y += cdk.h
header-y += cdrom.h
header-y += cgroupstats.h
header-y += chio.h
@@ -93,7 +92,6 @@ header-y += cn_proc.h
header-y += coda.h
header-y += coda_psdev.h
header-y += coff.h
-header-y += comstats.h
header-y += connector.h
header-y += const.h
header-y += cramfs_fs.h
@@ -140,7 +138,6 @@ header-y += fuse.h
header-y += futex.h
header-y += gameport.h
header-y += gen_stats.h
-header-y += generic_serial.h
header-y += genetlink.h
header-y += gfs2_ondisk.h
header-y += gigaset_dev.h
@@ -372,6 +369,7 @@ header-y += tipc.h
header-y += tipc_config.h
header-y += toshiba.h
header-y += tty.h
+header-y += tty_flags.h
header-y += types.h
header-y += udf_fs_i.h
header-y += udp.h
diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h
index d117b29d106..f612c783170 100644
--- a/include/linux/amba/serial.h
+++ b/include/linux/amba/serial.h
@@ -205,7 +205,6 @@ struct amba_pl011_data {
void *dma_tx_param;
void (*init) (void);
void (*exit) (void);
- void (*reset) (void);
};
#endif
diff --git a/include/linux/cd1400.h b/include/linux/cd1400.h
deleted file mode 100644
index 1dc3ab0523f..00000000000
--- a/include/linux/cd1400.h
+++ /dev/null
@@ -1,292 +0,0 @@
-/*****************************************************************************/
-
-/*
- * cd1400.h -- cd1400 UART hardware info.
- *
- * Copyright (C) 1996-1998 Stallion Technologies
- * Copyright (C) 1994-1996 Greg Ungerer.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*****************************************************************************/
-#ifndef _CD1400_H
-#define _CD1400_H
-/*****************************************************************************/
-
-/*
- * Define the number of async ports per cd1400 uart chip.
- */
-#define CD1400_PORTS 4
-
-/*
- * Define the cd1400 uarts internal FIFO sizes.
- */
-#define CD1400_TXFIFOSIZE 12
-#define CD1400_RXFIFOSIZE 12
-
-/*
- * Local RX FIFO thresh hold level. Also define the RTS thresh hold
- * based on the RX thresh hold.
- */
-#define FIFO_RXTHRESHOLD 6
-#define FIFO_RTSTHRESHOLD 7
-
-/*****************************************************************************/
-
-/*
- * Define the cd1400 register addresses. These are all the valid
- * registers with the cd1400. Some are global, some virtual, some
- * per port.
- */
-#define GFRCR 0x40
-#define CAR 0x68
-#define GCR 0x4b
-#define SVRR 0x67
-#define RICR 0x44
-#define TICR 0x45
-#define MICR 0x46
-#define RIR 0x6b
-#define TIR 0x6a
-#define MIR 0x69
-#define PPR 0x7e
-
-#define RIVR 0x43
-#define TIVR 0x42
-#define MIVR 0x41
-#define TDR 0x63
-#define RDSR 0x62
-#define MISR 0x4c
-#define EOSRR 0x60
-
-#define LIVR 0x18
-#define CCR 0x05
-#define SRER 0x06
-#define COR1 0x08
-#define COR2 0x09
-#define COR3 0x0a
-#define COR4 0x1e
-#define COR5 0x1f
-#define CCSR 0x0b
-#define RDCR 0x0e
-#define SCHR1 0x1a
-#define SCHR2 0x1b
-#define SCHR3 0x1c
-#define SCHR4 0x1d
-#define SCRL 0x22
-#define SCRH 0x23
-#define LNC 0x24
-#define MCOR1 0x15
-#define MCOR2 0x16
-#define RTPR 0x21
-#define MSVR1 0x6c
-#define MSVR2 0x6d
-#define PSVR 0x6f
-#define RBPR 0x78
-#define RCOR 0x7c
-#define TBPR 0x72
-#define TCOR 0x76
-
-/*****************************************************************************/
-
-/*
- * Define the set of baud rate clock divisors.
- */
-#define CD1400_CLK0 8
-#define CD1400_CLK1 32
-#define CD1400_CLK2 128
-#define CD1400_CLK3 512
-#define CD1400_CLK4 2048
-
-#define CD1400_NUMCLKS 5
-
-/*****************************************************************************/
-
-/*
- * Define the clock pre-scalar value to be a 5 ms clock. This should be
- * OK for now. It would probably be better to make it 10 ms, but we
- * can't fit that divisor into 8 bits!
- */
-#define PPR_SCALAR 244
-
-/*****************************************************************************/
-
-/*
- * Define values used to set character size options.
- */
-#define COR1_CHL5 0x00
-#define COR1_CHL6 0x01
-#define COR1_CHL7 0x02
-#define COR1_CHL8 0x03
-
-/*
- * Define values used to set the number of stop bits.
- */
-#define COR1_STOP1 0x00
-#define COR1_STOP15 0x04
-#define COR1_STOP2 0x08
-
-/*
- * Define values used to set the parity scheme in use.
- */
-#define COR1_PARNONE 0x00
-#define COR1_PARFORCE 0x20
-#define COR1_PARENB 0x40
-#define COR1_PARIGNORE 0x10
-
-#define COR1_PARODD 0x80
-#define COR1_PAREVEN 0x00
-
-#define COR2_IXM 0x80
-#define COR2_TXIBE 0x40
-#define COR2_ETC 0x20
-#define COR2_LLM 0x10
-#define COR2_RLM 0x08
-#define COR2_RTSAO 0x04
-#define COR2_CTSAE 0x02
-
-#define COR3_SCDRNG 0x80
-#define COR3_SCD34 0x40
-#define COR3_FCT 0x20
-#define COR3_SCD12 0x10
-
-/*
- * Define values used by COR4.
- */
-#define COR4_BRKINT 0x08
-#define COR4_IGNBRK 0x18
-
-/*****************************************************************************/
-
-/*
- * Define the modem control register values.
- * Note that the actual hardware is a little different to the conventional
- * pin names on the cd1400.
- */
-#define MSVR1_DTR 0x01
-#define MSVR1_DSR 0x10
-#define MSVR1_RI 0x20
-#define MSVR1_CTS 0x40
-#define MSVR1_DCD 0x80
-
-#define MSVR2_RTS 0x02
-#define MSVR2_DSR 0x10
-#define MSVR2_RI 0x20
-#define MSVR2_CTS 0x40
-#define MSVR2_DCD 0x80
-
-#define MCOR1_DCD 0x80
-#define MCOR1_CTS 0x40
-#define MCOR1_RI 0x20
-#define MCOR1_DSR 0x10
-
-#define MCOR2_DCD 0x80
-#define MCOR2_CTS 0x40
-#define MCOR2_RI 0x20
-#define MCOR2_DSR 0x10
-
-/*****************************************************************************/
-
-/*
- * Define the bits used with the service (interrupt) enable register.
- */
-#define SRER_NNDT 0x01
-#define SRER_TXEMPTY 0x02
-#define SRER_TXDATA 0x04
-#define SRER_RXDATA 0x10
-#define SRER_MODEM 0x80
-
-/*****************************************************************************/
-
-/*
- * Define operational commands for the command register.
- */
-#define CCR_RESET 0x80
-#define CCR_CORCHANGE 0x4e
-#define CCR_SENDCH 0x20
-#define CCR_CHANCTRL 0x10
-
-#define CCR_TXENABLE (CCR_CHANCTRL | 0x08)
-#define CCR_TXDISABLE (CCR_CHANCTRL | 0x04)
-#define CCR_RXENABLE (CCR_CHANCTRL | 0x02)
-#define CCR_RXDISABLE (CCR_CHANCTRL | 0x01)
-
-#define CCR_SENDSCHR1 (CCR_SENDCH | 0x01)
-#define CCR_SENDSCHR2 (CCR_SENDCH | 0x02)
-#define CCR_SENDSCHR3 (CCR_SENDCH | 0x03)
-#define CCR_SENDSCHR4 (CCR_SENDCH | 0x04)
-
-#define CCR_RESETCHAN (CCR_RESET | 0x00)
-#define CCR_RESETFULL (CCR_RESET | 0x01)
-#define CCR_TXFLUSHFIFO (CCR_RESET | 0x02)
-
-#define CCR_MAXWAIT 10000
-
-/*****************************************************************************/
-
-/*
- * Define the valid acknowledgement types (for hw ack cycle).
- */
-#define ACK_TYPMASK 0x07
-#define ACK_TYPTX 0x02
-#define ACK_TYPMDM 0x01
-#define ACK_TYPRXGOOD 0x03
-#define ACK_TYPRXBAD 0x07
-
-#define SVRR_RX 0x01
-#define SVRR_TX 0x02
-#define SVRR_MDM 0x04
-
-#define ST_OVERRUN 0x01
-#define ST_FRAMING 0x02
-#define ST_PARITY 0x04
-#define ST_BREAK 0x08
-#define ST_SCHAR1 0x10
-#define ST_SCHAR2 0x20
-#define ST_SCHAR3 0x30
-#define ST_SCHAR4 0x40
-#define ST_RANGE 0x70
-#define ST_SCHARMASK 0x70
-#define ST_TIMEOUT 0x80
-
-#define MISR_DCD 0x80
-#define MISR_CTS 0x40
-#define MISR_RI 0x20
-#define MISR_DSR 0x10
-
-/*****************************************************************************/
-
-/*
- * Defines for the CCSR status register.
- */
-#define CCSR_RXENABLED 0x80
-#define CCSR_RXFLOWON 0x40
-#define CCSR_RXFLOWOFF 0x20
-#define CCSR_TXENABLED 0x08
-#define CCSR_TXFLOWON 0x04
-#define CCSR_TXFLOWOFF 0x02
-
-/*****************************************************************************/
-
-/*
- * Define the embedded commands.
- */
-#define ETC_CMD 0x00
-#define ETC_STARTBREAK 0x81
-#define ETC_DELAY 0x82
-#define ETC_STOPBREAK 0x83
-
-/*****************************************************************************/
-#endif
diff --git a/include/linux/cdk.h b/include/linux/cdk.h
deleted file mode 100644
index 80093a8d4f6..00000000000
--- a/include/linux/cdk.h
+++ /dev/null
@@ -1,486 +0,0 @@
-/*****************************************************************************/
-
-/*
- * cdk.h -- CDK interface definitions.
- *
- * Copyright (C) 1996-1998 Stallion Technologies
- * Copyright (C) 1994-1996 Greg Ungerer.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*****************************************************************************/
-#ifndef _CDK_H
-#define _CDK_H
-/*****************************************************************************/
-
-#pragma pack(2)
-
-/*
- * The following set of definitions is used to communicate with the
- * shared memory interface of the Stallion intelligent multiport serial
- * boards. The definitions in this file are taken directly from the
- * document titled "Generic Stackable Interface, Downloader and
- * Communications Development Kit".
- */
-
-/*
- * Define the set of important shared memory addresses. These are
- * required to initialize the board and get things started. All of these
- * addresses are relative to the start of the shared memory.
- */
-#define CDK_SIGADDR 0x200
-#define CDK_FEATADDR 0x280
-#define CDK_CDKADDR 0x300
-#define CDK_RDYADDR 0x262
-
-#define CDK_ALIVEMARKER 13
-
-/*
- * On hardware power up the ROMs located on the EasyConnection 8/64 will
- * fill out the following signature information into shared memory. This
- * way the host system can quickly determine that the board is present
- * and is operational.
- */
-typedef struct cdkecpsig {
- unsigned long magic;
- unsigned short romver;
- unsigned short cputype;
- unsigned char panelid[8];
-} cdkecpsig_t;
-
-#define ECP_MAGIC 0x21504345
-
-/*
- * On hardware power up the ROMs located on the ONboard, Stallion and
- * Brumbys will fill out the following signature information into shared
- * memory. This way the host system can quickly determine that the board
- * is present and is operational.
- */
-typedef struct cdkonbsig {
- unsigned short magic0;
- unsigned short magic1;
- unsigned short magic2;
- unsigned short magic3;
- unsigned short romver;
- unsigned short memoff;
- unsigned short memseg;
- unsigned short amask0;
- unsigned short pic;
- unsigned short status;
- unsigned short btype;
- unsigned short clkticks;
- unsigned short clkspeed;
- unsigned short amask1;
- unsigned short amask2;
-} cdkonbsig_t;
-
-#define ONB_MAGIC0 0xf2a7
-#define ONB_MAGIC1 0xa149
-#define ONB_MAGIC2 0x6352
-#define ONB_MAGIC3 0xf121
-
-/*
- * Define the feature area structure. The feature area is the set of
- * startup parameters used by the slave image when it starts executing.
- * They allow for the specification of buffer sizes, debug trace, etc.
- */
-typedef struct cdkfeature {
- unsigned long debug;
- unsigned long banner;
- unsigned long etype;
- unsigned long nrdevs;
- unsigned long brdspec;
- unsigned long txrqsize;
- unsigned long rxrqsize;
- unsigned long flags;
-} cdkfeature_t;
-
-#define ETYP_DDK 0
-#define ETYP_CDK 1
-
-/*
- * Define the CDK header structure. This is the info that the slave
- * environment sets up after it has been downloaded and started. It
- * essentially provides a memory map for the shared memory interface.
- */
-typedef struct cdkhdr {
- unsigned short command;
- unsigned short status;
- unsigned short port;
- unsigned short mode;
- unsigned long cmd_buf[14];
- unsigned short alive_cnt;
- unsigned short intrpt_mode;
- unsigned char intrpt_id[8];
- unsigned char ver_release;
- unsigned char ver_modification;
- unsigned char ver_fix;
- unsigned char deadman_restart;
- unsigned short deadman;
- unsigned short nrdevs;
- unsigned long memp;
- unsigned long hostp;
- unsigned long slavep;
- unsigned char hostreq;
- unsigned char slavereq;
- unsigned char cmd_reserved[30];
-} cdkhdr_t;
-
-#define MODE_DDK 0
-#define MODE_CDK 1
-
-#define IMD_INTR 0x0
-#define IMD_PPINTR 0x1
-#define IMD_POLL 0xff
-
-/*
- * Define the memory mapping structure. This structure is pointed to by
- * the memp field in the stlcdkhdr struct. As many as these structures
- * as required are laid out in shared memory to define how the rest of
- * shared memory is divided up. There will be one for each port.
- */
-typedef struct cdkmem {
- unsigned short dtype;
- unsigned long offset;
-} cdkmem_t;
-
-#define TYP_UNDEFINED 0x0
-#define TYP_ASYNCTRL 0x1
-#define TYP_ASYNC 0x20
-#define TYP_PARALLEL 0x40
-#define TYP_SYNCX21 0x60
-
-/*****************************************************************************/
-
-/*
- * Following is a set of defines and structures used to actually deal
- * with the serial ports on the board. Firstly is the set of commands
- * that can be applied to ports.
- */
-#define ASYCMD (((unsigned long) 'a') << 8)
-
-#define A_NULL (ASYCMD | 0)
-#define A_FLUSH (ASYCMD | 1)
-#define A_BREAK (ASYCMD | 2)
-#define A_GETPORT (ASYCMD | 3)
-#define A_SETPORT (ASYCMD | 4)
-#define A_SETPORTF (ASYCMD | 5)
-#define A_SETPORTFTX (ASYCMD | 6)
-#define A_SETPORTFRX (ASYCMD | 7)
-#define A_GETSIGNALS (ASYCMD | 8)
-#define A_SETSIGNALS (ASYCMD | 9)
-#define A_SETSIGNALSF (ASYCMD | 10)
-#define A_SETSIGNALSFTX (ASYCMD | 11)
-#define A_SETSIGNALSFRX (ASYCMD | 12)
-#define A_GETNOTIFY (ASYCMD | 13)
-#define A_SETNOTIFY (ASYCMD | 14)
-#define A_NOTIFY (ASYCMD | 15)
-#define A_PORTCTRL (ASYCMD | 16)
-#define A_GETSTATS (ASYCMD | 17)
-#define A_RQSTATE (ASYCMD | 18)
-#define A_FLOWSTATE (ASYCMD | 19)
-#define A_CLEARSTATS (ASYCMD | 20)
-
-/*
- * Define those arguments used for simple commands.
- */
-#define FLUSHRX 0x1
-#define FLUSHTX 0x2
-
-#define BREAKON -1
-#define BREAKOFF -2
-
-/*
- * Define the port setting structure, and all those defines that go along
- * with it. Basically this structure defines the characteristics of this
- * port: baud rate, chars, parity, input/output char cooking etc.
- */
-typedef struct asyport {
- unsigned long baudout;
- unsigned long baudin;
- unsigned long iflag;
- unsigned long oflag;
- unsigned long lflag;
- unsigned long pflag;
- unsigned long flow;
- unsigned long spare1;
- unsigned short vtime;
- unsigned short vmin;
- unsigned short txlo;
- unsigned short txhi;
- unsigned short rxlo;
- unsigned short rxhi;
- unsigned short rxhog;
- unsigned short spare2;
- unsigned char csize;
- unsigned char stopbs;
- unsigned char parity;
- unsigned char stopin;
- unsigned char startin;
- unsigned char stopout;
- unsigned char startout;
- unsigned char parmark;
- unsigned char brkmark;
- unsigned char cc[11];
-} asyport_t;
-
-#define PT_STOP1 0x0
-#define PT_STOP15 0x1
-#define PT_STOP2 0x2
-
-#define PT_NOPARITY 0x0
-#define PT_ODDPARITY 0x1
-#define PT_EVENPARITY 0x2
-#define PT_MARKPARITY 0x3
-#define PT_SPACEPARITY 0x4
-
-#define F_NONE 0x0
-#define F_IXON 0x1
-#define F_IXOFF 0x2
-#define F_IXANY 0x4
-#define F_IOXANY 0x8
-#define F_RTSFLOW 0x10
-#define F_CTSFLOW 0x20
-#define F_DTRFLOW 0x40
-#define F_DCDFLOW 0x80
-#define F_DSROFLOW 0x100
-#define F_DSRIFLOW 0x200
-
-#define FI_NORX 0x1
-#define FI_RAW 0x2
-#define FI_ISTRIP 0x4
-#define FI_UCLC 0x8
-#define FI_INLCR 0x10
-#define FI_ICRNL 0x20
-#define FI_IGNCR 0x40
-#define FI_IGNBREAK 0x80
-#define FI_DSCRDBREAK 0x100
-#define FI_1MARKBREAK 0x200
-#define FI_2MARKBREAK 0x400
-#define FI_XCHNGBREAK 0x800
-#define FI_IGNRXERRS 0x1000
-#define FI_DSCDRXERRS 0x2000
-#define FI_1MARKRXERRS 0x4000
-#define FI_2MARKRXERRS 0x8000
-#define FI_XCHNGRXERRS 0x10000
-#define FI_DSCRDNULL 0x20000
-
-#define FO_OLCUC 0x1
-#define FO_ONLCR 0x2
-#define FO_OOCRNL 0x4
-#define FO_ONOCR 0x8
-#define FO_ONLRET 0x10
-#define FO_ONL 0x20
-#define FO_OBS 0x40
-#define FO_OVT 0x80
-#define FO_OFF 0x100
-#define FO_OTAB1 0x200
-#define FO_OTAB2 0x400
-#define FO_OTAB3 0x800
-#define FO_OCR1 0x1000
-#define FO_OCR2 0x2000
-#define FO_OCR3 0x4000
-#define FO_OFILL 0x8000
-#define FO_ODELL 0x10000
-
-#define P_RTSLOCK 0x1
-#define P_CTSLOCK 0x2
-#define P_MAPRTS 0x4
-#define P_MAPCTS 0x8
-#define P_LOOPBACK 0x10
-#define P_DTRFOLLOW 0x20
-#define P_FAKEDCD 0x40
-
-#define P_RXIMIN 0x10000
-#define P_RXITIME 0x20000
-#define P_RXTHOLD 0x40000
-
-/*
- * Define a structure to communicate serial port signal and data state
- * information.
- */
-typedef struct asysigs {
- unsigned long data;
- unsigned long signal;
- unsigned long sigvalue;
-} asysigs_t;
-
-#define DT_TXBUSY 0x1
-#define DT_TXEMPTY 0x2
-#define DT_TXLOW 0x4
-#define DT_TXHIGH 0x8
-#define DT_TXFULL 0x10
-#define DT_TXHOG 0x20
-#define DT_TXFLOWED 0x40
-#define DT_TXBREAK 0x80
-
-#define DT_RXBUSY 0x100
-#define DT_RXEMPTY 0x200
-#define DT_RXLOW 0x400
-#define DT_RXHIGH 0x800
-#define DT_RXFULL 0x1000
-#define DT_RXHOG 0x2000
-#define DT_RXFLOWED 0x4000
-#define DT_RXBREAK 0x8000
-
-#define SG_DTR 0x1
-#define SG_DCD 0x2
-#define SG_RTS 0x4
-#define SG_CTS 0x8
-#define SG_DSR 0x10
-#define SG_RI 0x20
-
-/*
- * Define the notification setting structure. This is used to tell the
- * port what events we want to be informed about. Fields here use the
- * same defines as for the asysigs structure above.
- */
-typedef struct asynotify {
- unsigned long ctrl;
- unsigned long data;
- unsigned long signal;
- unsigned long sigvalue;
-} asynotify_t;
-
-/*
- * Define the port control structure. It is used to do fine grain
- * control operations on the port.
- */
-typedef struct {
- unsigned long rxctrl;
- unsigned long txctrl;
- char rximdch;
- char tximdch;
- char spare1;
- char spare2;
-} asyctrl_t;
-
-#define CT_ENABLE 0x1
-#define CT_DISABLE 0x2
-#define CT_STOP 0x4
-#define CT_START 0x8
-#define CT_STARTFLOW 0x10
-#define CT_STOPFLOW 0x20
-#define CT_SENDCHR 0x40
-
-/*
- * Define the stats structure kept for each port. This is a useful set
- * of data collected for each port on the slave. The A_GETSTATS command
- * is used to retrieve this data from the slave.
- */
-typedef struct asystats {
- unsigned long opens;
- unsigned long txchars;
- unsigned long rxchars;
- unsigned long txringq;
- unsigned long rxringq;
- unsigned long txmsgs;
- unsigned long rxmsgs;
- unsigned long txflushes;
- unsigned long rxflushes;
- unsigned long overruns;
- unsigned long framing;
- unsigned long parity;
- unsigned long ringover;
- unsigned long lost;
- unsigned long rxstart;
- unsigned long rxstop;
- unsigned long txstart;
- unsigned long txstop;
- unsigned long dcdcnt;
- unsigned long dtrcnt;
- unsigned long ctscnt;
- unsigned long rtscnt;
- unsigned long dsrcnt;
- unsigned long ricnt;
- unsigned long txbreaks;
- unsigned long rxbreaks;
- unsigned long signals;
- unsigned long state;
- unsigned long hwid;
-} asystats_t;
-
-/*****************************************************************************/
-
-/*
- * All command and control communication with a device on the slave is
- * via a control block in shared memory. Each device has its own control
- * block, defined by the following structure. The control block allows
- * the host to open, close and control the device on the slave.
- */
-typedef struct cdkctrl {
- unsigned char open;
- unsigned char close;
- unsigned long openarg;
- unsigned long closearg;
- unsigned long cmd;
- unsigned long status;
- unsigned long args[32];
-} cdkctrl_t;
-
-/*
- * Each device on the slave passes data to and from the host via a ring
- * queue in shared memory. Define a ring queue structure to hold the
- * vital information about each ring queue. Two ring queues will be
- * allocated for each port, one for receive data and one for transmit
- * data.
- */
-typedef struct cdkasyrq {
- unsigned long offset;
- unsigned short size;
- unsigned short head;
- unsigned short tail;
-} cdkasyrq_t;
-
-/*
- * Each asynchronous port is defined in shared memory by the following
- * structure. It contains a control block to command a device, and also
- * the necessary data channel information as well.
- */
-typedef struct cdkasy {
- cdkctrl_t ctrl;
- unsigned short notify;
- asynotify_t changed;
- unsigned short receive;
- cdkasyrq_t rxq;
- unsigned short transmit;
- cdkasyrq_t txq;
-} cdkasy_t;
-
-#pragma pack()
-
-/*****************************************************************************/
-
-/*
- * Define the set of ioctls used by the driver to do special things
- * to the board. These include interrupting it, and initializing
- * the driver after board startup and shutdown.
- */
-#include <linux/ioctl.h>
-
-#define STL_BINTR _IO('s',20)
-#define STL_BSTART _IO('s',21)
-#define STL_BSTOP _IO('s',22)
-#define STL_BRESET _IO('s',23)
-
-/*
- * Define a set of ioctl extensions, used to get at special stuff.
- */
-#define STL_GETPFLAG _IO('s',80)
-#define STL_SETPFLAG _IO('s',81)
-
-/*****************************************************************************/
-#endif
diff --git a/include/linux/comstats.h b/include/linux/comstats.h
deleted file mode 100644
index 3f5ea8e8026..00000000000
--- a/include/linux/comstats.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/*****************************************************************************/
-
-/*
- * comstats.h -- Serial Port Stats.
- *
- * Copyright (C) 1996-1998 Stallion Technologies
- * Copyright (C) 1994-1996 Greg Ungerer.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*****************************************************************************/
-#ifndef _COMSTATS_H
-#define _COMSTATS_H
-/*****************************************************************************/
-
-/*
- * Serial port stats structure. The structure itself is UART
- * independent, but some fields may be UART/driver specific (for
- * example state).
- */
-
-typedef struct {
- unsigned long brd;
- unsigned long panel;
- unsigned long port;
- unsigned long hwid;
- unsigned long type;
- unsigned long txtotal;
- unsigned long rxtotal;
- unsigned long txbuffered;
- unsigned long rxbuffered;
- unsigned long rxoverrun;
- unsigned long rxparity;
- unsigned long rxframing;
- unsigned long rxlost;
- unsigned long txbreaks;
- unsigned long rxbreaks;
- unsigned long txxon;
- unsigned long txxoff;
- unsigned long rxxon;
- unsigned long rxxoff;
- unsigned long txctson;
- unsigned long txctsoff;
- unsigned long rxrtson;
- unsigned long rxrtsoff;
- unsigned long modem;
- unsigned long state;
- unsigned long flags;
- unsigned long ttystate;
- unsigned long cflags;
- unsigned long iflags;
- unsigned long oflags;
- unsigned long lflags;
- unsigned long signals;
-} comstats_t;
-
-
-/*
- * Board stats structure. Returns useful info about the board.
- */
-
-#define COM_MAXPANELS 8
-
-typedef struct {
- unsigned long panel;
- unsigned long type;
- unsigned long hwid;
- unsigned long nrports;
-} companel_t;
-
-typedef struct {
- unsigned long brd;
- unsigned long type;
- unsigned long hwid;
- unsigned long state;
- unsigned long ioaddr;
- unsigned long ioaddr2;
- unsigned long memaddr;
- unsigned long irq;
- unsigned long nrpanels;
- unsigned long nrports;
- companel_t panels[COM_MAXPANELS];
-} combrd_t;
-
-
-/*
- * Define the ioctl operations for stats stuff.
- */
-#include <linux/ioctl.h>
-
-#define COM_GETPORTSTATS _IO('c',30)
-#define COM_CLRPORTSTATS _IO('c',31)
-#define COM_GETBRDSTATS _IO('c',32)
-
-
-/*
- * Define the set of ioctls that give user level access to the
- * private port, panel and board structures. The argument required
- * will be driver dependent!
- */
-#define COM_READPORT _IO('c',40)
-#define COM_READBOARD _IO('c',41)
-#define COM_READPANEL _IO('c',42)
-
-/*****************************************************************************/
-#endif
diff --git a/include/linux/generic_serial.h b/include/linux/generic_serial.h
deleted file mode 100644
index 79b3eb37243..00000000000
--- a/include/linux/generic_serial.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * generic_serial.h
- *
- * Copyright (C) 1998 R.E.Wolff@BitWizard.nl
- *
- * written for the SX serial driver.
- *
- * Version 0.1 -- December, 1998.
- */
-
-#ifndef GENERIC_SERIAL_H
-#define GENERIC_SERIAL_H
-
-#warning Use of this header is deprecated.
-#warning Since nobody sets the constants defined here for you, you should not, in any case, use them. Including the header is thus pointless.
-
-/* Flags */
-/* Warning: serial.h defines some ASYNC_ flags, they say they are "only"
- used in serial.c, but they are also used in all other serial drivers.
- Make sure they don't clash with these here... */
-#define GS_TX_INTEN 0x00800000
-#define GS_RX_INTEN 0x00400000
-#define GS_ACTIVE 0x00200000
-
-#define GS_TYPE_NORMAL 1
-
-#define GS_DEBUG_FLUSH 0x00000001
-#define GS_DEBUG_BTR 0x00000002
-#define GS_DEBUG_TERMIOS 0x00000004
-#define GS_DEBUG_STUFF 0x00000008
-#define GS_DEBUG_CLOSE 0x00000010
-#define GS_DEBUG_FLOW 0x00000020
-#define GS_DEBUG_WRITE 0x00000040
-
-#endif
diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
index 7ea898c55a6..a12a38107c1 100644
--- a/include/linux/i2c/twl.h
+++ b/include/linux/i2c/twl.h
@@ -561,9 +561,6 @@ struct twl4030_bci_platform_data {
/* TWL4030_GPIO_MAX (18) GPIOs, with interrupts */
struct twl4030_gpio_platform_data {
- int gpio_base;
- unsigned irq_base, irq_end;
-
/* package the two LED signals as output-only GPIOs? */
bool use_leds;
diff --git a/include/linux/istallion.h b/include/linux/istallion.h
deleted file mode 100644
index ad700a60c15..00000000000
--- a/include/linux/istallion.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*****************************************************************************/
-
-/*
- * istallion.h -- stallion intelligent multiport serial driver.
- *
- * Copyright (C) 1996-1998 Stallion Technologies
- * Copyright (C) 1994-1996 Greg Ungerer.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*****************************************************************************/
-#ifndef _ISTALLION_H
-#define _ISTALLION_H
-/*****************************************************************************/
-
-/*
- * Define important driver constants here.
- */
-#define STL_MAXBRDS 4
-#define STL_MAXPANELS 4
-#define STL_MAXPORTS 64
-#define STL_MAXCHANS (STL_MAXPORTS + 1)
-#define STL_MAXDEVS (STL_MAXBRDS * STL_MAXPORTS)
-
-
-/*
- * Define a set of structures to hold all the board/panel/port info
- * for our ports. These will be dynamically allocated as required at
- * driver initialization time.
- */
-
-/*
- * Port and board structures to hold status info about each object.
- * The board structure contains pointers to structures for each port
- * connected to it. Panels are not distinguished here, since
- * communication with the slave board will always be on a per port
- * basis.
- */
-struct stliport {
- unsigned long magic;
- struct tty_port port;
- unsigned int portnr;
- unsigned int panelnr;
- unsigned int brdnr;
- unsigned long state;
- unsigned int devnr;
- int baud_base;
- int custom_divisor;
- int closing_wait;
- int rc;
- int argsize;
- void *argp;
- unsigned int rxmarkmsk;
- wait_queue_head_t raw_wait;
- struct asysigs asig;
- unsigned long addr;
- unsigned long rxoffset;
- unsigned long txoffset;
- unsigned long sigs;
- unsigned long pflag;
- unsigned int rxsize;
- unsigned int txsize;
- unsigned char reqbit;
- unsigned char portidx;
- unsigned char portbit;
-};
-
-/*
- * Use a structure of function pointers to do board level operations.
- * These include, enable/disable, paging shared memory, interrupting, etc.
- */
-struct stlibrd {
- unsigned long magic;
- unsigned int brdnr;
- unsigned int brdtype;
- unsigned long state;
- unsigned int nrpanels;
- unsigned int nrports;
- unsigned int nrdevs;
- unsigned int iobase;
- int iosize;
- unsigned long memaddr;
- void __iomem *membase;
- unsigned long memsize;
- int pagesize;
- int hostoffset;
- int slaveoffset;
- int bitsize;
- int enabval;
- unsigned int panels[STL_MAXPANELS];
- int panelids[STL_MAXPANELS];
- void (*init)(struct stlibrd *brdp);
- void (*enable)(struct stlibrd *brdp);
- void (*reenable)(struct stlibrd *brdp);
- void (*disable)(struct stlibrd *brdp);
- void __iomem *(*getmemptr)(struct stlibrd *brdp, unsigned long offset, int line);
- void (*intr)(struct stlibrd *brdp);
- void (*reset)(struct stlibrd *brdp);
- struct stliport *ports[STL_MAXPORTS];
-};
-
-
-/*
- * Define MAGIC numbers used for above structures.
- */
-#define STLI_PORTMAGIC 0xe671c7a1
-#define STLI_BOARDMAGIC 0x4bc6c825
-
-/*****************************************************************************/
-#endif
diff --git a/include/linux/kbd_kern.h b/include/linux/kbd_kern.h
index daf4a3a40ee..b7c8cdc1d42 100644
--- a/include/linux/kbd_kern.h
+++ b/include/linux/kbd_kern.h
@@ -65,7 +65,6 @@ struct kbd_struct {
extern int kbd_init(void);
-extern unsigned char getledstate(void);
extern void setledstate(struct kbd_struct *kbd, unsigned int led);
extern int do_poke_blanked_console;
@@ -145,16 +144,4 @@ void compute_shiftstate(void);
extern unsigned int keymap_count;
-/* console.c */
-
-static inline void con_schedule_flip(struct tty_struct *t)
-{
- unsigned long flags;
- spin_lock_irqsave(&t->buf.lock, flags);
- if (t->buf.tail != NULL)
- t->buf.tail->commit = t->buf.tail->used;
- spin_unlock_irqrestore(&t->buf.lock, flags);
- schedule_work(&t->buf.work);
-}
-
#endif
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 604382143bc..594b419b7d2 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -82,10 +82,18 @@
__x - (__x % (y)); \
} \
)
+
+/*
+ * Divide positive or negative dividend by positive divisor and round
+ * to closest integer. Result is undefined for negative divisors.
+ */
#define DIV_ROUND_CLOSEST(x, divisor)( \
{ \
- typeof(divisor) __divisor = divisor; \
- (((x) + ((__divisor) / 2)) / (__divisor)); \
+ typeof(x) __x = x; \
+ typeof(divisor) __d = divisor; \
+ (((typeof(x))-1) >= 0 || (__x) >= 0) ? \
+ (((__x) + ((__d) / 2)) / (__d)) : \
+ (((__x) - ((__d) / 2)) / (__d)); \
} \
)
diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h
index eaad49f7c13..ba43d4806b8 100644
--- a/include/linux/mfd/twl6040.h
+++ b/include/linux/mfd/twl6040.h
@@ -194,7 +194,6 @@ struct twl6040_vibra_data {
struct twl6040_platform_data {
int audpwron_gpio; /* audio power-on gpio */
- unsigned int irq_base;
struct twl6040_codec_data *codec;
struct twl6040_vibra_data *vibra;
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 111aca5e97f..4b27f9f503e 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -239,6 +239,7 @@ struct mmc_card {
#define MMC_QUIRK_BLK_NO_CMD23 (1<<7) /* Avoid CMD23 for regular multiblock */
#define MMC_QUIRK_BROKEN_BYTE_MODE_512 (1<<8) /* Avoid sending 512 bytes in */
#define MMC_QUIRK_LONG_READ_TIME (1<<9) /* Data read time > CSD says */
+#define MMC_QUIRK_SEC_ERASE_TRIM_BROKEN (1<<10) /* Skip secure for erase/trim */
/* byte mode */
unsigned int poweroff_notify_state; /* eMMC4.5 notify feature */
#define MMC_NO_POWER_NOTIFICATION 0
diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h
index 4ff57e81051..85af8184691 100644
--- a/include/linux/omapfb.h
+++ b/include/linux/omapfb.h
@@ -220,7 +220,12 @@ struct omapfb_display_info {
#ifdef __KERNEL__
-#include <plat/board.h>
+struct omap_lcd_config {
+ char panel_name[16];
+ char ctrl_name[16];
+ s16 nreset_gpio;
+ u8 data_lines;
+};
struct omapfb_platform_data {
struct omap_lcd_config lcd;
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index fc352607734..6b4565c440c 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2149,7 +2149,7 @@
#define PCI_DEVICE_ID_TIGON3_5704S 0x16a8
#define PCI_DEVICE_ID_NX2_57800_VF 0x16a9
#define PCI_DEVICE_ID_NX2_5706S 0x16aa
-#define PCI_DEVICE_ID_NX2_57840_MF 0x16ab
+#define PCI_DEVICE_ID_NX2_57840_MF 0x16a4
#define PCI_DEVICE_ID_NX2_5708S 0x16ac
#define PCI_DEVICE_ID_NX2_57840_VF 0x16ad
#define PCI_DEVICE_ID_NX2_57810_MF 0x16ae
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/include/linux/platform_data/gpio-omap.h
index 50fb7cc000e..e8741c2678d 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/include/linux/platform_data/gpio-omap.h
@@ -1,6 +1,4 @@
/*
- * arch/arm/plat-omap/include/mach/gpio.h
- *
* OMAP GPIO handling defines and functions
*
* Copyright (C) 2003-2005 Nokia Corporation
@@ -155,6 +153,8 @@
#define OMAP4_GPIO_CLEARDATAOUT 0x0190
#define OMAP4_GPIO_SETDATAOUT 0x0194
+#define OMAP_MAX_GPIO_LINES 192
+
#define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr))
#define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES)
@@ -213,16 +213,5 @@ extern void omap2_gpio_prepare_for_idle(int off_mode);
extern void omap2_gpio_resume_after_idle(void);
extern void omap_set_gpio_debounce(int gpio, int enable);
extern void omap_set_gpio_debounce_time(int gpio, int enable);
-/*-------------------------------------------------------------------------*/
-
-/*
- * Wrappers for "new style" GPIO calls, using the new infrastructure
- * which lets us plug in FPGA, I2C, and other implementations.
- *
- * The original OMAP-specific calls should eventually be removed.
- */
-
-#include <linux/errno.h>
-#include <asm-generic/gpio.h>
#endif
diff --git a/include/linux/platform_data/max310x.h b/include/linux/platform_data/max310x.h
new file mode 100644
index 00000000000..91648bf5fc5
--- /dev/null
+++ b/include/linux/platform_data/max310x.h
@@ -0,0 +1,67 @@
+/*
+ * Maxim (Dallas) MAX3107/8 serial driver
+ *
+ * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * Based on max3100.c, by Christian Pellegrin <chripell@evolware.org>
+ * Based on max3110.c, by Feng Tang <feng.tang@intel.com>
+ * Based on max3107.c, by Aavamobile
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _MAX310X_H_
+#define _MAX310X_H_
+
+/*
+ * Example board initialization data:
+ *
+ * static struct max310x_pdata max3107_pdata = {
+ * .driver_flags = MAX310X_EXT_CLK,
+ * .uart_flags[0] = MAX310X_ECHO_SUPRESS | MAX310X_AUTO_DIR_CTRL,
+ * .frequency = 3686400,
+ * .gpio_base = -1,
+ * };
+ *
+ * static struct spi_board_info spi_device_max3107[] = {
+ * {
+ * .modalias = "max3107",
+ * .irq = IRQ_EINT3,
+ * .bus_num = 1,
+ * .chip_select = 1,
+ * .platform_data = &max3107_pdata,
+ * },
+ * };
+ */
+
+#define MAX310X_MAX_UARTS 1
+
+/* MAX310X platform data structure */
+struct max310x_pdata {
+ /* Flags global to driver */
+ const u8 driver_flags:2;
+#define MAX310X_EXT_CLK (0x00000001) /* External clock enable */
+#define MAX310X_AUTOSLEEP (0x00000002) /* Enable AutoSleep mode */
+ /* Flags global to UART port */
+ const u8 uart_flags[MAX310X_MAX_UARTS];
+#define MAX310X_LOOPBACK (0x00000001) /* Loopback mode enable */
+#define MAX310X_ECHO_SUPRESS (0x00000002) /* Enable echo supress */
+#define MAX310X_AUTO_DIR_CTRL (0x00000004) /* Enable Auto direction
+ * control (RS-485)
+ */
+ /* Frequency (extrenal clock or crystal) */
+ const int frequency;
+ /* GPIO base number (can be negative) */
+ const int gpio_base;
+ /* Called during startup */
+ void (*init)(void);
+ /* Called before finish */
+ void (*exit)(void);
+ /* Suspend callback */
+ void (*suspend)(int do_suspend);
+};
+
+#endif
diff --git a/include/linux/platform_data/omap1_bl.h b/include/linux/platform_data/omap1_bl.h
new file mode 100644
index 00000000000..881a8e92d60
--- /dev/null
+++ b/include/linux/platform_data/omap1_bl.h
@@ -0,0 +1,11 @@
+#ifndef __OMAP1_BL_H__
+#define __OMAP1_BL_H__
+
+#include <linux/device.h>
+
+struct omap_backlight_config {
+ int default_intensity;
+ int (*set_power)(struct device *dev, int state);
+};
+
+#endif
diff --git a/include/linux/platform_data/sccnxp.h b/include/linux/platform_data/sccnxp.h
new file mode 100644
index 00000000000..7311ccd3217
--- /dev/null
+++ b/include/linux/platform_data/sccnxp.h
@@ -0,0 +1,93 @@
+/*
+ * NXP (Philips) SCC+++(SCN+++) serial driver
+ *
+ * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * Based on sc26xx.c, by Thomas Bogendörfer (tsbogend@alpha.franken.de)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __SCCNXP_H
+#define __SCCNXP_H
+
+#define SCCNXP_MAX_UARTS 2
+
+/* Output lines */
+#define LINE_OP0 1
+#define LINE_OP1 2
+#define LINE_OP2 3
+#define LINE_OP3 4
+#define LINE_OP4 5
+#define LINE_OP5 6
+#define LINE_OP6 7
+#define LINE_OP7 8
+
+/* Input lines */
+#define LINE_IP0 9
+#define LINE_IP1 10
+#define LINE_IP2 11
+#define LINE_IP3 12
+#define LINE_IP4 13
+#define LINE_IP5 14
+#define LINE_IP6 15
+
+/* Signals */
+#define DTR_OP 0 /* DTR */
+#define RTS_OP 4 /* RTS */
+#define DSR_IP 8 /* DSR */
+#define CTS_IP 12 /* CTS */
+#define DCD_IP 16 /* DCD */
+#define RNG_IP 20 /* RNG */
+
+#define DIR_OP 24 /* Special signal for control RS-485.
+ * Goes high when transmit,
+ * then goes low.
+ */
+
+/* Routing control signal 'sig' to line 'line' */
+#define MCTRL_SIG(sig, line) ((line) << (sig))
+
+/*
+ * Example board initialization data:
+ *
+ * static struct resource sc2892_resources[] = {
+ * DEFINE_RES_MEM(UART_PHYS_START, 0x10),
+ * DEFINE_RES_IRQ(IRQ_EXT2),
+ * };
+ *
+ * static struct sccnxp_pdata sc2892_info = {
+ * .frequency = 3686400,
+ * .mctrl_cfg[0] = MCTRL_SIG(DIR_OP, LINE_OP0),
+ * .mctrl_cfg[1] = MCTRL_SIG(DIR_OP, LINE_OP1),
+ * };
+ *
+ * static struct platform_device sc2892 = {
+ * .name = "sc2892",
+ * .id = -1,
+ * .resource = sc2892_resources,
+ * .num_resources = ARRAY_SIZE(sc2892_resources),
+ * .dev = {
+ * .platform_data = &sc2892_info,
+ * },
+ * };
+ */
+
+/* SCCNXP platform data structure */
+struct sccnxp_pdata {
+ /* Frequency (extrenal clock or crystal) */
+ int frequency;
+ /* Shift for A0 line */
+ const u8 reg_shift;
+ /* Modem control lines configuration */
+ const u32 mctrl_cfg[SCCNXP_MAX_UARTS];
+ /* Called during startup */
+ void (*init)(void);
+ /* Called before finish */
+ void (*exit)(void);
+};
+
+#endif
diff --git a/include/linux/sc26198.h b/include/linux/sc26198.h
deleted file mode 100644
index 7ca35abad38..00000000000
--- a/include/linux/sc26198.h
+++ /dev/null
@@ -1,533 +0,0 @@
-/*****************************************************************************/
-
-/*
- * sc26198.h -- SC26198 UART hardware info.
- *
- * Copyright (C) 1995-1998 Stallion Technologies
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*****************************************************************************/
-#ifndef _SC26198_H
-#define _SC26198_H
-/*****************************************************************************/
-
-/*
- * Define the number of async ports per sc26198 uart device.
- */
-#define SC26198_PORTS 8
-
-/*
- * Baud rate timing clocks. All derived from a master 14.7456 MHz clock.
- */
-#define SC26198_MASTERCLOCK 14745600L
-#define SC26198_DCLK (SC26198_MASTERCLOCK)
-#define SC26198_CCLK (SC26198_MASTERCLOCK / 2)
-#define SC26198_BCLK (SC26198_MASTERCLOCK / 4)
-
-/*
- * Define internal FIFO sizes for the 26198 ports.
- */
-#define SC26198_TXFIFOSIZE 16
-#define SC26198_RXFIFOSIZE 16
-
-/*****************************************************************************/
-
-/*
- * Global register definitions. These registers are global to each 26198
- * device, not specific ports on it.
- */
-#define TSTR 0x0d
-#define GCCR 0x0f
-#define ICR 0x1b
-#define WDTRCR 0x1d
-#define IVR 0x1f
-#define BRGTRUA 0x84
-#define GPOSR 0x87
-#define GPOC 0x8b
-#define UCIR 0x8c
-#define CIR 0x8c
-#define BRGTRUB 0x8d
-#define GRXFIFO 0x8e
-#define GTXFIFO 0x8e
-#define GCCR2 0x8f
-#define BRGTRLA 0x94
-#define GPOR 0x97
-#define GPOD 0x9b
-#define BRGTCR 0x9c
-#define GICR 0x9c
-#define BRGTRLB 0x9d
-#define GIBCR 0x9d
-#define GITR 0x9f
-
-/*
- * Per port channel registers. These are the register offsets within
- * the port address space, so need to have the port address (0 to 7)
- * inserted in bit positions 4:6.
- */
-#define MR0 0x00
-#define MR1 0x01
-#define IOPCR 0x02
-#define BCRBRK 0x03
-#define BCRCOS 0x04
-#define BCRX 0x06
-#define BCRA 0x07
-#define XONCR 0x08
-#define XOFFCR 0x09
-#define ARCR 0x0a
-#define RXCSR 0x0c
-#define TXCSR 0x0e
-#define MR2 0x80
-#define SR 0x81
-#define SCCR 0x81
-#define ISR 0x82
-#define IMR 0x82
-#define TXFIFO 0x83
-#define RXFIFO 0x83
-#define IPR 0x84
-#define IOPIOR 0x85
-#define XISR 0x86
-
-/*
- * For any given port calculate the address to use to access a specified
- * register. This is only used for unusual access, mostly this is done
- * through the assembler access routines.
- */
-#define SC26198_PORTREG(port,reg) ((((port) & 0x07) << 4) | (reg))
-
-/*****************************************************************************/
-
-/*
- * Global configuration control register bit definitions.
- */
-#define GCCR_NOACK 0x00
-#define GCCR_IVRACK 0x02
-#define GCCR_IVRCHANACK 0x04
-#define GCCR_IVRTYPCHANACK 0x06
-#define GCCR_ASYNCCYCLE 0x00
-#define GCCR_SYNCCYCLE 0x40
-
-/*****************************************************************************/
-
-/*
- * Mode register 0 bit definitions.
- */
-#define MR0_ADDRNONE 0x00
-#define MR0_AUTOWAKE 0x01
-#define MR0_AUTODOZE 0x02
-#define MR0_AUTOWAKEDOZE 0x03
-#define MR0_SWFNONE 0x00
-#define MR0_SWFTX 0x04
-#define MR0_SWFRX 0x08
-#define MR0_SWFRXTX 0x0c
-#define MR0_TXMASK 0x30
-#define MR0_TXEMPTY 0x00
-#define MR0_TXHIGH 0x10
-#define MR0_TXHALF 0x20
-#define MR0_TXRDY 0x00
-#define MR0_ADDRNT 0x00
-#define MR0_ADDRT 0x40
-#define MR0_SWFNT 0x00
-#define MR0_SWFT 0x80
-
-/*
- * Mode register 1 bit definitions.
- */
-#define MR1_CS5 0x00
-#define MR1_CS6 0x01
-#define MR1_CS7 0x02
-#define MR1_CS8 0x03
-#define MR1_PAREVEN 0x00
-#define MR1_PARODD 0x04
-#define MR1_PARENB 0x00
-#define MR1_PARFORCE 0x08
-#define MR1_PARNONE 0x10
-#define MR1_PARSPECIAL 0x18
-#define MR1_ERRCHAR 0x00
-#define MR1_ERRBLOCK 0x20
-#define MR1_ISRUNMASKED 0x00
-#define MR1_ISRMASKED 0x40
-#define MR1_AUTORTS 0x80
-
-/*
- * Mode register 2 bit definitions.
- */
-#define MR2_STOP1 0x00
-#define MR2_STOP15 0x01
-#define MR2_STOP2 0x02
-#define MR2_STOP916 0x03
-#define MR2_RXFIFORDY 0x00
-#define MR2_RXFIFOHALF 0x04
-#define MR2_RXFIFOHIGH 0x08
-#define MR2_RXFIFOFULL 0x0c
-#define MR2_AUTOCTS 0x10
-#define MR2_TXRTS 0x20
-#define MR2_MODENORM 0x00
-#define MR2_MODEAUTOECHO 0x40
-#define MR2_MODELOOP 0x80
-#define MR2_MODEREMECHO 0xc0
-
-/*****************************************************************************/
-
-/*
- * Baud Rate Generator (BRG) selector values.
- */
-#define BRG_50 0x00
-#define BRG_75 0x01
-#define BRG_150 0x02
-#define BRG_200 0x03
-#define BRG_300 0x04
-#define BRG_450 0x05
-#define BRG_600 0x06
-#define BRG_900 0x07
-#define BRG_1200 0x08
-#define BRG_1800 0x09
-#define BRG_2400 0x0a
-#define BRG_3600 0x0b
-#define BRG_4800 0x0c
-#define BRG_7200 0x0d
-#define BRG_9600 0x0e
-#define BRG_14400 0x0f
-#define BRG_19200 0x10
-#define BRG_28200 0x11
-#define BRG_38400 0x12
-#define BRG_57600 0x13
-#define BRG_115200 0x14
-#define BRG_230400 0x15
-#define BRG_GIN0 0x16
-#define BRG_GIN1 0x17
-#define BRG_CT0 0x18
-#define BRG_CT1 0x19
-#define BRG_RX2TX316 0x1b
-#define BRG_RX2TX31 0x1c
-
-#define SC26198_MAXBAUD 921600
-
-/*****************************************************************************/
-
-/*
- * Command register command definitions.
- */
-#define CR_NULL 0x04
-#define CR_ADDRNORMAL 0x0c
-#define CR_RXRESET 0x14
-#define CR_TXRESET 0x1c
-#define CR_CLEARRXERR 0x24
-#define CR_BREAKRESET 0x2c
-#define CR_TXSTARTBREAK 0x34
-#define CR_TXSTOPBREAK 0x3c
-#define CR_RTSON 0x44
-#define CR_RTSOFF 0x4c
-#define CR_ADDRINIT 0x5c
-#define CR_RXERRBLOCK 0x6c
-#define CR_TXSENDXON 0x84
-#define CR_TXSENDXOFF 0x8c
-#define CR_GANGXONSET 0x94
-#define CR_GANGXOFFSET 0x9c
-#define CR_GANGXONINIT 0xa4
-#define CR_GANGXOFFINIT 0xac
-#define CR_HOSTXON 0xb4
-#define CR_HOSTXOFF 0xbc
-#define CR_CANCELXOFF 0xc4
-#define CR_ADDRRESET 0xdc
-#define CR_RESETALLPORTS 0xf4
-#define CR_RESETALL 0xfc
-
-#define CR_RXENABLE 0x01
-#define CR_TXENABLE 0x02
-
-/*****************************************************************************/
-
-/*
- * Channel status register.
- */
-#define SR_RXRDY 0x01
-#define SR_RXFULL 0x02
-#define SR_TXRDY 0x04
-#define SR_TXEMPTY 0x08
-#define SR_RXOVERRUN 0x10
-#define SR_RXPARITY 0x20
-#define SR_RXFRAMING 0x40
-#define SR_RXBREAK 0x80
-
-#define SR_RXERRS (SR_RXPARITY | SR_RXFRAMING | SR_RXOVERRUN)
-
-/*****************************************************************************/
-
-/*
- * Interrupt status register and interrupt mask register bit definitions.
- */
-#define IR_TXRDY 0x01
-#define IR_RXRDY 0x02
-#define IR_RXBREAK 0x04
-#define IR_XONXOFF 0x10
-#define IR_ADDRRECOG 0x20
-#define IR_RXWATCHDOG 0x40
-#define IR_IOPORT 0x80
-
-/*****************************************************************************/
-
-/*
- * Interrupt vector register field definitions.
- */
-#define IVR_CHANMASK 0x07
-#define IVR_TYPEMASK 0x18
-#define IVR_CONSTMASK 0xc0
-
-#define IVR_RXDATA 0x10
-#define IVR_RXBADDATA 0x18
-#define IVR_TXDATA 0x08
-#define IVR_OTHER 0x00
-
-/*****************************************************************************/
-
-/*
- * BRG timer control register bit definitions.
- */
-#define BRGCTCR_DISABCLK0 0x00
-#define BRGCTCR_ENABCLK0 0x08
-#define BRGCTCR_DISABCLK1 0x00
-#define BRGCTCR_ENABCLK1 0x80
-
-#define BRGCTCR_0SCLK16 0x00
-#define BRGCTCR_0SCLK32 0x01
-#define BRGCTCR_0SCLK64 0x02
-#define BRGCTCR_0SCLK128 0x03
-#define BRGCTCR_0X1 0x04
-#define BRGCTCR_0X12 0x05
-#define BRGCTCR_0IO1A 0x06
-#define BRGCTCR_0GIN0 0x07
-
-#define BRGCTCR_1SCLK16 0x00
-#define BRGCTCR_1SCLK32 0x10
-#define BRGCTCR_1SCLK64 0x20
-#define BRGCTCR_1SCLK128 0x30
-#define BRGCTCR_1X1 0x40
-#define BRGCTCR_1X12 0x50
-#define BRGCTCR_1IO1B 0x60
-#define BRGCTCR_1GIN1 0x70
-
-/*****************************************************************************/
-
-/*
- * Watch dog timer enable register.
- */
-#define WDTRCR_ENABALL 0xff
-
-/*****************************************************************************/
-
-/*
- * XON/XOFF interrupt status register.
- */
-#define XISR_TXCHARMASK 0x03
-#define XISR_TXCHARNORMAL 0x00
-#define XISR_TXWAIT 0x01
-#define XISR_TXXOFFPEND 0x02
-#define XISR_TXXONPEND 0x03
-
-#define XISR_TXFLOWMASK 0x0c
-#define XISR_TXNORMAL 0x00
-#define XISR_TXSTOPPEND 0x04
-#define XISR_TXSTARTED 0x08
-#define XISR_TXSTOPPED 0x0c
-
-#define XISR_RXFLOWMASK 0x30
-#define XISR_RXFLOWNONE 0x00
-#define XISR_RXXONSENT 0x10
-#define XISR_RXXOFFSENT 0x20
-
-#define XISR_RXXONGOT 0x40
-#define XISR_RXXOFFGOT 0x80
-
-/*****************************************************************************/
-
-/*
- * Current interrupt register.
- */
-#define CIR_TYPEMASK 0xc0
-#define CIR_TYPEOTHER 0x00
-#define CIR_TYPETX 0x40
-#define CIR_TYPERXGOOD 0x80
-#define CIR_TYPERXBAD 0xc0
-
-#define CIR_RXDATA 0x80
-#define CIR_RXBADDATA 0x40
-#define CIR_TXDATA 0x40
-
-#define CIR_CHANMASK 0x07
-#define CIR_CNTMASK 0x38
-
-#define CIR_SUBTYPEMASK 0x38
-#define CIR_SUBNONE 0x00
-#define CIR_SUBCOS 0x08
-#define CIR_SUBADDR 0x10
-#define CIR_SUBXONXOFF 0x18
-#define CIR_SUBBREAK 0x28
-
-/*****************************************************************************/
-
-/*
- * Global interrupting channel register.
- */
-#define GICR_CHANMASK 0x07
-
-/*****************************************************************************/
-
-/*
- * Global interrupting byte count register.
- */
-#define GICR_COUNTMASK 0x0f
-
-/*****************************************************************************/
-
-/*
- * Global interrupting type register.
- */
-#define GITR_RXMASK 0xc0
-#define GITR_RXNONE 0x00
-#define GITR_RXBADDATA 0x80
-#define GITR_RXGOODDATA 0xc0
-#define GITR_TXDATA 0x20
-
-#define GITR_SUBTYPEMASK 0x07
-#define GITR_SUBNONE 0x00
-#define GITR_SUBCOS 0x01
-#define GITR_SUBADDR 0x02
-#define GITR_SUBXONXOFF 0x03
-#define GITR_SUBBREAK 0x05
-
-/*****************************************************************************/
-
-/*
- * Input port change register.
- */
-#define IPR_CTS 0x01
-#define IPR_DTR 0x02
-#define IPR_RTS 0x04
-#define IPR_DCD 0x08
-#define IPR_CTSCHANGE 0x10
-#define IPR_DTRCHANGE 0x20
-#define IPR_RTSCHANGE 0x40
-#define IPR_DCDCHANGE 0x80
-
-#define IPR_CHANGEMASK 0xf0
-
-/*****************************************************************************/
-
-/*
- * IO port interrupt and output register.
- */
-#define IOPR_CTS 0x01
-#define IOPR_DTR 0x02
-#define IOPR_RTS 0x04
-#define IOPR_DCD 0x08
-#define IOPR_CTSCOS 0x10
-#define IOPR_DTRCOS 0x20
-#define IOPR_RTSCOS 0x40
-#define IOPR_DCDCOS 0x80
-
-/*****************************************************************************/
-
-/*
- * IO port configuration register.
- */
-#define IOPCR_SETCTS 0x00
-#define IOPCR_SETDTR 0x04
-#define IOPCR_SETRTS 0x10
-#define IOPCR_SETDCD 0x00
-
-#define IOPCR_SETSIGS (IOPCR_SETRTS | IOPCR_SETRTS | IOPCR_SETDTR | IOPCR_SETDCD)
-
-/*****************************************************************************/
-
-/*
- * General purpose output select register.
- */
-#define GPORS_TXC1XA 0x08
-#define GPORS_TXC16XA 0x09
-#define GPORS_RXC16XA 0x0a
-#define GPORS_TXC16XB 0x0b
-#define GPORS_GPOR3 0x0c
-#define GPORS_GPOR2 0x0d
-#define GPORS_GPOR1 0x0e
-#define GPORS_GPOR0 0x0f
-
-/*****************************************************************************/
-
-/*
- * General purpose output register.
- */
-#define GPOR_0 0x01
-#define GPOR_1 0x02
-#define GPOR_2 0x04
-#define GPOR_3 0x08
-
-/*****************************************************************************/
-
-/*
- * General purpose output clock register.
- */
-#define GPORC_0NONE 0x00
-#define GPORC_0GIN0 0x01
-#define GPORC_0GIN1 0x02
-#define GPORC_0IO3A 0x02
-
-#define GPORC_1NONE 0x00
-#define GPORC_1GIN0 0x04
-#define GPORC_1GIN1 0x08
-#define GPORC_1IO3C 0x0c
-
-#define GPORC_2NONE 0x00
-#define GPORC_2GIN0 0x10
-#define GPORC_2GIN1 0x20
-#define GPORC_2IO3E 0x20
-
-#define GPORC_3NONE 0x00
-#define GPORC_3GIN0 0x40
-#define GPORC_3GIN1 0x80
-#define GPORC_3IO3G 0xc0
-
-/*****************************************************************************/
-
-/*
- * General purpose output data register.
- */
-#define GPOD_0MASK 0x03
-#define GPOD_0SET1 0x00
-#define GPOD_0SET0 0x01
-#define GPOD_0SETR0 0x02
-#define GPOD_0SETIO3B 0x03
-
-#define GPOD_1MASK 0x0c
-#define GPOD_1SET1 0x00
-#define GPOD_1SET0 0x04
-#define GPOD_1SETR0 0x08
-#define GPOD_1SETIO3D 0x0c
-
-#define GPOD_2MASK 0x30
-#define GPOD_2SET1 0x00
-#define GPOD_2SET0 0x10
-#define GPOD_2SETR0 0x20
-#define GPOD_2SETIO3F 0x30
-
-#define GPOD_3MASK 0xc0
-#define GPOD_3SET1 0x00
-#define GPOD_3SET0 0x40
-#define GPOD_3SETR0 0x80
-#define GPOD_3SETIO3H 0xc0
-
-/*****************************************************************************/
-#endif
diff --git a/include/linux/serial.h b/include/linux/serial.h
index 90e9f981358..861e51de476 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -12,9 +12,12 @@
#include <linux/types.h>
+#include <linux/tty_flags.h>
+
#ifdef __KERNEL__
#include <asm/page.h>
+
/*
* Counters of the input lines (CTS, DSR, RI, CD) interrupts
*/
@@ -83,89 +86,11 @@ struct serial_struct {
#define SERIAL_IO_HUB6 1
#define SERIAL_IO_MEM 2
-struct serial_uart_config {
- char *name;
- int dfl_xmit_fifo_size;
- int flags;
-};
-
#define UART_CLEAR_FIFO 0x01
#define UART_USE_FIFO 0x02
#define UART_STARTECH 0x04
#define UART_NATSEMI 0x08
-/*
- * Definitions for async_struct (and serial_struct) flags field
- *
- * Define ASYNCB_* for convenient use with {test,set,clear}_bit.
- */
-#define ASYNCB_HUP_NOTIFY 0 /* Notify getty on hangups and closes
- * on the callout port */
-#define ASYNCB_FOURPORT 1 /* Set OU1, OUT2 per AST Fourport settings */
-#define ASYNCB_SAK 2 /* Secure Attention Key (Orange book) */
-#define ASYNCB_SPLIT_TERMIOS 3 /* Separate termios for dialin/callout */
-#define ASYNCB_SPD_HI 4 /* Use 56000 instead of 38400 bps */
-#define ASYNCB_SPD_VHI 5 /* Use 115200 instead of 38400 bps */
-#define ASYNCB_SKIP_TEST 6 /* Skip UART test during autoconfiguration */
-#define ASYNCB_AUTO_IRQ 7 /* Do automatic IRQ during
- * autoconfiguration */
-#define ASYNCB_SESSION_LOCKOUT 8 /* Lock out cua opens based on session */
-#define ASYNCB_PGRP_LOCKOUT 9 /* Lock out cua opens based on pgrp */
-#define ASYNCB_CALLOUT_NOHUP 10 /* Don't do hangups for cua device */
-#define ASYNCB_HARDPPS_CD 11 /* Call hardpps when CD goes high */
-#define ASYNCB_SPD_SHI 12 /* Use 230400 instead of 38400 bps */
-#define ASYNCB_LOW_LATENCY 13 /* Request low latency behaviour */
-#define ASYNCB_BUGGY_UART 14 /* This is a buggy UART, skip some safety
- * checks. Note: can be dangerous! */
-#define ASYNCB_AUTOPROBE 15 /* Port was autoprobed by PCI or PNP code */
-#define ASYNCB_LAST_USER 15
-
-/* Internal flags used only by kernel */
-#define ASYNCB_INITIALIZED 31 /* Serial port was initialized */
-#define ASYNCB_SUSPENDED 30 /* Serial port is suspended */
-#define ASYNCB_NORMAL_ACTIVE 29 /* Normal device is active */
-#define ASYNCB_BOOT_AUTOCONF 28 /* Autoconfigure port on bootup */
-#define ASYNCB_CLOSING 27 /* Serial port is closing */
-#define ASYNCB_CTS_FLOW 26 /* Do CTS flow control */
-#define ASYNCB_CHECK_CD 25 /* i.e., CLOCAL */
-#define ASYNCB_SHARE_IRQ 24 /* for multifunction cards, no longer used */
-#define ASYNCB_CONS_FLOW 23 /* flow control for console */
-#define ASYNCB_FIRST_KERNEL 22
-
-#define ASYNC_HUP_NOTIFY (1U << ASYNCB_HUP_NOTIFY)
-#define ASYNC_SUSPENDED (1U << ASYNCB_SUSPENDED)
-#define ASYNC_FOURPORT (1U << ASYNCB_FOURPORT)
-#define ASYNC_SAK (1U << ASYNCB_SAK)
-#define ASYNC_SPLIT_TERMIOS (1U << ASYNCB_SPLIT_TERMIOS)
-#define ASYNC_SPD_HI (1U << ASYNCB_SPD_HI)
-#define ASYNC_SPD_VHI (1U << ASYNCB_SPD_VHI)
-#define ASYNC_SKIP_TEST (1U << ASYNCB_SKIP_TEST)
-#define ASYNC_AUTO_IRQ (1U << ASYNCB_AUTO_IRQ)
-#define ASYNC_SESSION_LOCKOUT (1U << ASYNCB_SESSION_LOCKOUT)
-#define ASYNC_PGRP_LOCKOUT (1U << ASYNCB_PGRP_LOCKOUT)
-#define ASYNC_CALLOUT_NOHUP (1U << ASYNCB_CALLOUT_NOHUP)
-#define ASYNC_HARDPPS_CD (1U << ASYNCB_HARDPPS_CD)
-#define ASYNC_SPD_SHI (1U << ASYNCB_SPD_SHI)
-#define ASYNC_LOW_LATENCY (1U << ASYNCB_LOW_LATENCY)
-#define ASYNC_BUGGY_UART (1U << ASYNCB_BUGGY_UART)
-#define ASYNC_AUTOPROBE (1U << ASYNCB_AUTOPROBE)
-
-#define ASYNC_FLAGS ((1U << (ASYNCB_LAST_USER + 1)) - 1)
-#define ASYNC_USR_MASK (ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \
- ASYNC_LOW_LATENCY)
-#define ASYNC_SPD_CUST (ASYNC_SPD_HI|ASYNC_SPD_VHI)
-#define ASYNC_SPD_WARP (ASYNC_SPD_HI|ASYNC_SPD_SHI)
-#define ASYNC_SPD_MASK (ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)
-
-#define ASYNC_INITIALIZED (1U << ASYNCB_INITIALIZED)
-#define ASYNC_NORMAL_ACTIVE (1U << ASYNCB_NORMAL_ACTIVE)
-#define ASYNC_BOOT_AUTOCONF (1U << ASYNCB_BOOT_AUTOCONF)
-#define ASYNC_CLOSING (1U << ASYNCB_CLOSING)
-#define ASYNC_CTS_FLOW (1U << ASYNCB_CTS_FLOW)
-#define ASYNC_CHECK_CD (1U << ASYNCB_CHECK_CD)
-#define ASYNC_SHARE_IRQ (1U << ASYNCB_SHARE_IRQ)
-#define ASYNC_CONS_FLOW (1U << ASYNCB_CONS_FLOW)
-#define ASYNC_INTERNAL_FLAGS (~((1U << ASYNCB_FIRST_KERNEL) - 1))
/*
* Multiport serial configuration structure --- external structure
diff --git a/include/linux/serial167.h b/include/linux/serial167.h
deleted file mode 100644
index 59c81b70856..00000000000
--- a/include/linux/serial167.h
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * serial167.h
- *
- * Richard Hirst [richard@sleepie.demon.co.uk]
- *
- * Based on cyclades.h
- */
-
-struct cyclades_monitor {
- unsigned long int_count;
- unsigned long char_count;
- unsigned long char_max;
- unsigned long char_last;
-};
-
-/*
- * This is our internal structure for each serial port's state.
- *
- * Many fields are paralleled by the structure used by the serial_struct
- * structure.
- *
- * For definitions of the flags field, see tty.h
- */
-
-struct cyclades_port {
- int magic;
- int type;
- int card;
- int line;
- int flags; /* defined in tty.h */
- struct tty_struct *tty;
- int read_status_mask;
- int timeout;
- int xmit_fifo_size;
- int cor1,cor2,cor3,cor4,cor5,cor6,cor7;
- int tbpr,tco,rbpr,rco;
- int ignore_status_mask;
- int close_delay;
- int IER; /* Interrupt Enable Register */
- unsigned long last_active;
- int count; /* # of fd on device */
- int x_char; /* to be pushed out ASAP */
- int x_break;
- int blocked_open; /* # of blocked opens */
- unsigned char *xmit_buf;
- int xmit_head;
- int xmit_tail;
- int xmit_cnt;
- int default_threshold;
- int default_timeout;
- wait_queue_head_t open_wait;
- wait_queue_head_t close_wait;
- struct cyclades_monitor mon;
-};
-
-#define CYCLADES_MAGIC 0x4359
-
-#define CYGETMON 0x435901
-#define CYGETTHRESH 0x435902
-#define CYSETTHRESH 0x435903
-#define CYGETDEFTHRESH 0x435904
-#define CYSETDEFTHRESH 0x435905
-#define CYGETTIMEOUT 0x435906
-#define CYSETTIMEOUT 0x435907
-#define CYGETDEFTIMEOUT 0x435908
-#define CYSETDEFTIMEOUT 0x435909
-
-#define CyMaxChipsPerCard 1
-
-/**** cd2401 registers ****/
-
-#define CyGFRCR (0x81)
-#define CyCCR (0x13)
-#define CyCLR_CHAN (0x40)
-#define CyINIT_CHAN (0x20)
-#define CyCHIP_RESET (0x10)
-#define CyENB_XMTR (0x08)
-#define CyDIS_XMTR (0x04)
-#define CyENB_RCVR (0x02)
-#define CyDIS_RCVR (0x01)
-#define CyCAR (0xee)
-#define CyIER (0x11)
-#define CyMdmCh (0x80)
-#define CyRxExc (0x20)
-#define CyRxData (0x08)
-#define CyTxMpty (0x02)
-#define CyTxRdy (0x01)
-#define CyLICR (0x26)
-#define CyRISR (0x89)
-#define CyTIMEOUT (0x80)
-#define CySPECHAR (0x70)
-#define CyOVERRUN (0x08)
-#define CyPARITY (0x04)
-#define CyFRAME (0x02)
-#define CyBREAK (0x01)
-#define CyREOIR (0x84)
-#define CyTEOIR (0x85)
-#define CyMEOIR (0x86)
-#define CyNOTRANS (0x08)
-#define CyRFOC (0x30)
-#define CyRDR (0xf8)
-#define CyTDR (0xf8)
-#define CyMISR (0x8b)
-#define CyRISR (0x89)
-#define CyTISR (0x8a)
-#define CyMSVR1 (0xde)
-#define CyMSVR2 (0xdf)
-#define CyDSR (0x80)
-#define CyDCD (0x40)
-#define CyCTS (0x20)
-#define CyDTR (0x02)
-#define CyRTS (0x01)
-#define CyRTPRL (0x25)
-#define CyRTPRH (0x24)
-#define CyCOR1 (0x10)
-#define CyPARITY_NONE (0x00)
-#define CyPARITY_E (0x40)
-#define CyPARITY_O (0xC0)
-#define Cy_5_BITS (0x04)
-#define Cy_6_BITS (0x05)
-#define Cy_7_BITS (0x06)
-#define Cy_8_BITS (0x07)
-#define CyCOR2 (0x17)
-#define CyETC (0x20)
-#define CyCtsAE (0x02)
-#define CyCOR3 (0x16)
-#define Cy_1_STOP (0x02)
-#define Cy_2_STOP (0x04)
-#define CyCOR4 (0x15)
-#define CyREC_FIFO (0x0F) /* Receive FIFO threshold */
-#define CyCOR5 (0x14)
-#define CyCOR6 (0x18)
-#define CyCOR7 (0x07)
-#define CyRBPR (0xcb)
-#define CyRCOR (0xc8)
-#define CyTBPR (0xc3)
-#define CyTCOR (0xc0)
-#define CySCHR1 (0x1f)
-#define CySCHR2 (0x1e)
-#define CyTPR (0xda)
-#define CyPILR1 (0xe3)
-#define CyPILR2 (0xe0)
-#define CyPILR3 (0xe1)
-#define CyCMR (0x1b)
-#define CyASYNC (0x02)
-#define CyLICR (0x26)
-#define CyLIVR (0x09)
-#define CySCRL (0x23)
-#define CySCRH (0x22)
-#define CyTFTC (0x80)
-
-
-/* max number of chars in the FIFO */
-
-#define CyMAX_CHAR_FIFO 12
-
-/***************************************************************************/
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index a416e92012e..c174c90fb3f 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -65,11 +65,38 @@ enum {
* platform device. Using these will make your driver
* dependent on the 8250 driver.
*/
-struct uart_port;
-struct uart_8250_port;
+
+struct uart_8250_port {
+ struct uart_port port;
+ struct timer_list timer; /* "no irq" timer */
+ struct list_head list; /* ports on this IRQ */
+ unsigned short capabilities; /* port capabilities */
+ unsigned short bugs; /* port bugs */
+ unsigned int tx_loadsz; /* transmit fifo load size */
+ unsigned char acr;
+ unsigned char ier;
+ unsigned char lcr;
+ unsigned char mcr;
+ unsigned char mcr_mask; /* mask of user bits */
+ unsigned char mcr_force; /* mask of forced bits */
+ unsigned char cur_iotype; /* Running I/O type */
+
+ /*
+ * Some bits in registers are cleared on a read, so they must
+ * be saved whenever the register is read but the bits will not
+ * be immediately processed.
+ */
+#define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS
+ unsigned char lsr_saved_flags;
+#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
+ unsigned char msr_saved_flags;
+
+ /* 8250 specific callbacks */
+ int (*dl_read)(struct uart_8250_port *);
+ void (*dl_write)(struct uart_8250_port *, int);
+};
int serial8250_register_8250_port(struct uart_8250_port *);
-int serial8250_register_port(struct uart_port *);
void serial8250_unregister_port(int line);
void serial8250_suspend_port(int line);
void serial8250_resume_port(int line);
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 0253c2022e5..7cf0b68bbe9 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -193,8 +193,8 @@
/* SH-SCI */
#define PORT_SCIFB 93
-/* MAX3107 */
-#define PORT_MAX3107 94
+/* MAX310X */
+#define PORT_MAX310X 94
/* High Speed UART for Medfield */
#define PORT_MFD 95
diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h
index 8ce70d76f83..5ed325e88a8 100644
--- a/include/linux/serial_reg.h
+++ b/include/linux/serial_reg.h
@@ -40,6 +40,10 @@
#define UART_IIR_BUSY 0x07 /* DesignWare APB Busy Detect */
+#define UART_IIR_RX_TIMEOUT 0x0c /* OMAP RX Timeout interrupt */
+#define UART_IIR_XOFF 0x10 /* OMAP XOFF/Special Character */
+#define UART_IIR_CTS_RTS_DSR 0x20 /* OMAP CTS/RTS/DSR Change */
+
#define UART_FCR 2 /* Out: FIFO Control Register */
#define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */
#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */
diff --git a/include/linux/stallion.h b/include/linux/stallion.h
deleted file mode 100644
index 336af33c6ea..00000000000
--- a/include/linux/stallion.h
+++ /dev/null
@@ -1,147 +0,0 @@
-/*****************************************************************************/
-
-/*
- * stallion.h -- stallion multiport serial driver.
- *
- * Copyright (C) 1996-1998 Stallion Technologies
- * Copyright (C) 1994-1996 Greg Ungerer.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*****************************************************************************/
-#ifndef _STALLION_H
-#define _STALLION_H
-/*****************************************************************************/
-
-/*
- * Define important driver constants here.
- */
-#define STL_MAXBRDS 4
-#define STL_MAXPANELS 4
-#define STL_MAXBANKS 8
-#define STL_PORTSPERPANEL 16
-#define STL_MAXPORTS 64
-#define STL_MAXDEVS (STL_MAXBRDS * STL_MAXPORTS)
-
-
-/*
- * Define a set of structures to hold all the board/panel/port info
- * for our ports. These will be dynamically allocated as required.
- */
-
-/*
- * Define a ring queue structure for each port. This will hold the
- * TX data waiting to be output. Characters are fed into this buffer
- * from the line discipline (or even direct from user space!) and
- * then fed into the UARTs during interrupts. Will use a classic ring
- * queue here for this. The good thing about this type of ring queue
- * is that the head and tail pointers can be updated without interrupt
- * protection - since "write" code only needs to change the head, and
- * interrupt code only needs to change the tail.
- */
-struct stlrq {
- char *buf;
- char *head;
- char *tail;
-};
-
-/*
- * Port, panel and board structures to hold status info about each.
- * The board structure contains pointers to structures for each panel
- * connected to it, and in turn each panel structure contains pointers
- * for each port structure for each port on that panel. Note that
- * the port structure also contains the board and panel number that it
- * is associated with, this makes it (fairly) easy to get back to the
- * board/panel info for a port.
- */
-struct stlport {
- unsigned long magic;
- struct tty_port port;
- unsigned int portnr;
- unsigned int panelnr;
- unsigned int brdnr;
- int ioaddr;
- int uartaddr;
- unsigned int pagenr;
- unsigned long istate;
- int baud_base;
- int custom_divisor;
- int close_delay;
- int closing_wait;
- int openwaitcnt;
- int brklen;
- unsigned int sigs;
- unsigned int rxignoremsk;
- unsigned int rxmarkmsk;
- unsigned int imr;
- unsigned int crenable;
- unsigned long clk;
- unsigned long hwid;
- void *uartp;
- comstats_t stats;
- struct stlrq tx;
-};
-
-struct stlpanel {
- unsigned long magic;
- unsigned int panelnr;
- unsigned int brdnr;
- unsigned int pagenr;
- unsigned int nrports;
- int iobase;
- void *uartp;
- void (*isr)(struct stlpanel *panelp, unsigned int iobase);
- unsigned int hwid;
- unsigned int ackmask;
- struct stlport *ports[STL_PORTSPERPANEL];
-};
-
-struct stlbrd {
- unsigned long magic;
- unsigned int brdnr;
- unsigned int brdtype;
- unsigned int state;
- unsigned int nrpanels;
- unsigned int nrports;
- unsigned int nrbnks;
- int irq;
- int irqtype;
- int (*isr)(struct stlbrd *brdp);
- unsigned int ioaddr1;
- unsigned int ioaddr2;
- unsigned int iosize1;
- unsigned int iosize2;
- unsigned int iostatus;
- unsigned int ioctrl;
- unsigned int ioctrlval;
- unsigned int hwid;
- unsigned long clk;
- unsigned int bnkpageaddr[STL_MAXBANKS];
- unsigned int bnkstataddr[STL_MAXBANKS];
- struct stlpanel *bnk2panel[STL_MAXBANKS];
- struct stlpanel *panels[STL_MAXPANELS];
-};
-
-
-/*
- * Define MAGIC numbers used for above structures.
- */
-#define STL_PORTMAGIC 0x5a7182c9
-#define STL_PANELMAGIC 0x7ef621a1
-#define STL_BOARDMAGIC 0xa2267f52
-
-/*****************************************************************************/
-#endif
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 9f47ab540f6..1509b86825d 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -43,6 +43,7 @@
#include <linux/tty_driver.h>
#include <linux/tty_ldisc.h>
#include <linux/mutex.h>
+#include <linux/tty_flags.h>
@@ -103,28 +104,28 @@ struct tty_bufhead {
#define TTY_PARITY 3
#define TTY_OVERRUN 4
-#define INTR_CHAR(tty) ((tty)->termios->c_cc[VINTR])
-#define QUIT_CHAR(tty) ((tty)->termios->c_cc[VQUIT])
-#define ERASE_CHAR(tty) ((tty)->termios->c_cc[VERASE])
-#define KILL_CHAR(tty) ((tty)->termios->c_cc[VKILL])
-#define EOF_CHAR(tty) ((tty)->termios->c_cc[VEOF])
-#define TIME_CHAR(tty) ((tty)->termios->c_cc[VTIME])
-#define MIN_CHAR(tty) ((tty)->termios->c_cc[VMIN])
-#define SWTC_CHAR(tty) ((tty)->termios->c_cc[VSWTC])
-#define START_CHAR(tty) ((tty)->termios->c_cc[VSTART])
-#define STOP_CHAR(tty) ((tty)->termios->c_cc[VSTOP])
-#define SUSP_CHAR(tty) ((tty)->termios->c_cc[VSUSP])
-#define EOL_CHAR(tty) ((tty)->termios->c_cc[VEOL])
-#define REPRINT_CHAR(tty) ((tty)->termios->c_cc[VREPRINT])
-#define DISCARD_CHAR(tty) ((tty)->termios->c_cc[VDISCARD])
-#define WERASE_CHAR(tty) ((tty)->termios->c_cc[VWERASE])
-#define LNEXT_CHAR(tty) ((tty)->termios->c_cc[VLNEXT])
-#define EOL2_CHAR(tty) ((tty)->termios->c_cc[VEOL2])
-
-#define _I_FLAG(tty, f) ((tty)->termios->c_iflag & (f))
-#define _O_FLAG(tty, f) ((tty)->termios->c_oflag & (f))
-#define _C_FLAG(tty, f) ((tty)->termios->c_cflag & (f))
-#define _L_FLAG(tty, f) ((tty)->termios->c_lflag & (f))
+#define INTR_CHAR(tty) ((tty)->termios.c_cc[VINTR])
+#define QUIT_CHAR(tty) ((tty)->termios.c_cc[VQUIT])
+#define ERASE_CHAR(tty) ((tty)->termios.c_cc[VERASE])
+#define KILL_CHAR(tty) ((tty)->termios.c_cc[VKILL])
+#define EOF_CHAR(tty) ((tty)->termios.c_cc[VEOF])
+#define TIME_CHAR(tty) ((tty)->termios.c_cc[VTIME])
+#define MIN_CHAR(tty) ((tty)->termios.c_cc[VMIN])
+#define SWTC_CHAR(tty) ((tty)->termios.c_cc[VSWTC])
+#define START_CHAR(tty) ((tty)->termios.c_cc[VSTART])
+#define STOP_CHAR(tty) ((tty)->termios.c_cc[VSTOP])
+#define SUSP_CHAR(tty) ((tty)->termios.c_cc[VSUSP])
+#define EOL_CHAR(tty) ((tty)->termios.c_cc[VEOL])
+#define REPRINT_CHAR(tty) ((tty)->termios.c_cc[VREPRINT])
+#define DISCARD_CHAR(tty) ((tty)->termios.c_cc[VDISCARD])
+#define WERASE_CHAR(tty) ((tty)->termios.c_cc[VWERASE])
+#define LNEXT_CHAR(tty) ((tty)->termios.c_cc[VLNEXT])
+#define EOL2_CHAR(tty) ((tty)->termios.c_cc[VEOL2])
+
+#define _I_FLAG(tty, f) ((tty)->termios.c_iflag & (f))
+#define _O_FLAG(tty, f) ((tty)->termios.c_oflag & (f))
+#define _C_FLAG(tty, f) ((tty)->termios.c_cflag & (f))
+#define _L_FLAG(tty, f) ((tty)->termios.c_lflag & (f))
#define I_IGNBRK(tty) _I_FLAG((tty), IGNBRK)
#define I_BRKINT(tty) _I_FLAG((tty), BRKINT)
@@ -268,10 +269,11 @@ struct tty_struct {
struct mutex ldisc_mutex;
struct tty_ldisc *ldisc;
+ struct mutex legacy_mutex;
struct mutex termios_mutex;
spinlock_t ctrl_lock;
/* Termios values are protected by the termios mutex */
- struct ktermios *termios, *termios_locked;
+ struct ktermios termios, termios_locked;
struct termiox *termiox; /* May be NULL for unsupported */
char name[64];
struct pid *pgrp; /* Protected by ctrl lock */
@@ -410,6 +412,10 @@ extern int tty_register_driver(struct tty_driver *driver);
extern int tty_unregister_driver(struct tty_driver *driver);
extern struct device *tty_register_device(struct tty_driver *driver,
unsigned index, struct device *dev);
+extern struct device *tty_register_device_attr(struct tty_driver *driver,
+ unsigned index, struct device *device,
+ void *drvdata,
+ const struct attribute_group **attr_grp);
extern void tty_unregister_device(struct tty_driver *driver, unsigned index);
extern int tty_read_raw_data(struct tty_struct *tty, unsigned char *bufp,
int buflen);
@@ -423,7 +429,6 @@ extern void tty_unthrottle(struct tty_struct *tty);
extern int tty_do_resize(struct tty_struct *tty, struct winsize *ws);
extern void tty_driver_remove_tty(struct tty_driver *driver,
struct tty_struct *tty);
-extern void tty_shutdown(struct tty_struct *tty);
extern void tty_free_termios(struct tty_struct *tty);
extern int is_current_pgrp_orphaned(void);
extern struct pid *tty_get_pgrp(struct tty_struct *tty);
@@ -497,6 +502,15 @@ extern int tty_write_lock(struct tty_struct *tty, int ndelay);
#define tty_is_writelocked(tty) (mutex_is_locked(&tty->atomic_write_lock))
extern void tty_port_init(struct tty_port *port);
+extern void tty_port_link_device(struct tty_port *port,
+ struct tty_driver *driver, unsigned index);
+extern struct device *tty_port_register_device(struct tty_port *port,
+ struct tty_driver *driver, unsigned index,
+ struct device *device);
+extern struct device *tty_port_register_device_attr(struct tty_port *port,
+ struct tty_driver *driver, unsigned index,
+ struct device *device, void *drvdata,
+ const struct attribute_group **attr_grp);
extern int tty_port_alloc_xmit_buf(struct tty_port *port);
extern void tty_port_free_xmit_buf(struct tty_port *port);
extern void tty_port_put(struct tty_port *port);
@@ -508,6 +522,12 @@ static inline struct tty_port *tty_port_get(struct tty_port *port)
return port;
}
+/* If the cts flow control is enabled, return true. */
+static inline bool tty_port_cts_enabled(struct tty_port *port)
+{
+ return port->flags & ASYNC_CTS_FLOW;
+}
+
extern struct tty_struct *tty_port_tty_get(struct tty_port *port);
extern void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty);
extern int tty_port_carrier_raised(struct tty_port *port);
@@ -521,6 +541,8 @@ extern int tty_port_close_start(struct tty_port *port,
extern void tty_port_close_end(struct tty_port *port, struct tty_struct *tty);
extern void tty_port_close(struct tty_port *port,
struct tty_struct *tty, struct file *filp);
+extern int tty_port_install(struct tty_port *port, struct tty_driver *driver,
+ struct tty_struct *tty);
extern int tty_port_open(struct tty_port *port,
struct tty_struct *tty, struct file *filp);
static inline int tty_port_users(struct tty_port *port)
@@ -605,8 +627,12 @@ extern long vt_compat_ioctl(struct tty_struct *tty,
/* tty_mutex.c */
/* functions for preparation of BKL removal */
-extern void __lockfunc tty_lock(void) __acquires(tty_lock);
-extern void __lockfunc tty_unlock(void) __releases(tty_lock);
+extern void __lockfunc tty_lock(struct tty_struct *tty);
+extern void __lockfunc tty_unlock(struct tty_struct *tty);
+extern void __lockfunc tty_lock_pair(struct tty_struct *tty,
+ struct tty_struct *tty2);
+extern void __lockfunc tty_unlock_pair(struct tty_struct *tty,
+ struct tty_struct *tty2);
/*
* this shall be called only from where BTM is held (like close)
@@ -621,9 +647,9 @@ extern void __lockfunc tty_unlock(void) __releases(tty_lock);
static inline void tty_wait_until_sent_from_close(struct tty_struct *tty,
long timeout)
{
- tty_unlock(); /* tty->ops->close holds the BTM, drop it while waiting */
+ tty_unlock(tty); /* tty->ops->close holds the BTM, drop it while waiting */
tty_wait_until_sent(tty, timeout);
- tty_lock();
+ tty_lock(tty);
}
/*
@@ -638,16 +664,16 @@ static inline void tty_wait_until_sent_from_close(struct tty_struct *tty,
*
* Do not use in new code.
*/
-#define wait_event_interruptible_tty(wq, condition) \
+#define wait_event_interruptible_tty(tty, wq, condition) \
({ \
int __ret = 0; \
if (!(condition)) { \
- __wait_event_interruptible_tty(wq, condition, __ret); \
+ __wait_event_interruptible_tty(tty, wq, condition, __ret); \
} \
__ret; \
})
-#define __wait_event_interruptible_tty(wq, condition, ret) \
+#define __wait_event_interruptible_tty(tty, wq, condition, ret) \
do { \
DEFINE_WAIT(__wait); \
\
@@ -656,9 +682,9 @@ do { \
if (condition) \
break; \
if (!signal_pending(current)) { \
- tty_unlock(); \
+ tty_unlock(tty); \
schedule(); \
- tty_lock(); \
+ tty_lock(tty); \
continue; \
} \
ret = -ERESTARTSYS; \
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index 6e6dbb7447b..dd976cfb613 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -45,14 +45,9 @@
*
* void (*shutdown)(struct tty_struct * tty);
*
- * This routine is called synchronously when a particular tty device
- * is closed for the last time freeing up the resources.
- * Note that tty_shutdown() is not called if ops->shutdown is defined.
- * This means one is responsible to take care of calling ops->remove (e.g.
- * via tty_driver_remove_tty) and releasing tty->termios.
- * Note that this hook may be called from *all* the contexts where one
- * uses tty refcounting (e.g. tty_port_tty_get).
- *
+ * This routine is called under the tty lock when a particular tty device
+ * is closed for the last time. It executes before the tty resources
+ * are freed so may execute while another function holds a tty kref.
*
* void (*cleanup)(struct tty_struct * tty);
*
@@ -294,18 +289,18 @@ struct tty_operations {
struct tty_driver {
int magic; /* magic number for this structure */
struct kref kref; /* Reference management */
- struct cdev cdev;
+ struct cdev *cdevs;
struct module *owner;
const char *driver_name;
const char *name;
int name_base; /* offset of printed name */
int major; /* major device number */
int minor_start; /* start of minor device number */
- int num; /* number of devices allocated */
+ unsigned int num; /* number of devices allocated */
short type; /* type of tty driver */
short subtype; /* subtype of tty driver */
struct ktermios init_termios; /* Initial termios */
- int flags; /* tty driver flags */
+ unsigned long flags; /* tty driver flags */
struct proc_dir_entry *proc_entry; /* /proc fs entry */
struct tty_driver *other; /* only used for the PTY driver */
@@ -313,6 +308,7 @@ struct tty_driver {
* Pointer to the tty data structures
*/
struct tty_struct **ttys;
+ struct tty_port **ports;
struct ktermios **termios;
void *driver_state;
@@ -326,7 +322,8 @@ struct tty_driver {
extern struct list_head tty_drivers;
-extern struct tty_driver *__alloc_tty_driver(int lines, struct module *owner);
+extern struct tty_driver *__tty_alloc_driver(unsigned int lines,
+ struct module *owner, unsigned long flags);
extern void put_tty_driver(struct tty_driver *driver);
extern void tty_set_operations(struct tty_driver *driver,
const struct tty_operations *op);
@@ -334,7 +331,21 @@ extern struct tty_driver *tty_find_polling_driver(char *name, int *line);
extern void tty_driver_kref_put(struct tty_driver *driver);
-#define alloc_tty_driver(lines) __alloc_tty_driver(lines, THIS_MODULE)
+/* Use TTY_DRIVER_* flags below */
+#define tty_alloc_driver(lines, flags) \
+ __tty_alloc_driver(lines, THIS_MODULE, flags)
+
+/*
+ * DEPRECATED Do not use this in new code, use tty_alloc_driver instead.
+ * (And change the return value checks.)
+ */
+static inline struct tty_driver *alloc_tty_driver(unsigned int lines)
+{
+ struct tty_driver *ret = tty_alloc_driver(lines, 0);
+ if (IS_ERR(ret))
+ return NULL;
+ return ret;
+}
static inline struct tty_driver *tty_driver_kref_get(struct tty_driver *d)
{
@@ -380,6 +391,14 @@ static inline struct tty_driver *tty_driver_kref_get(struct tty_driver *d)
* the requested timeout to the caller instead of using a simple
* on/off interface.
*
+ * TTY_DRIVER_DYNAMIC_ALLOC -- do not allocate structures which are
+ * needed per line for this driver as it would waste memory.
+ * The driver will take care.
+ *
+ * TTY_DRIVER_UNNUMBERED_NODE -- do not create numbered /dev nodes. In
+ * other words create /dev/ttyprintk and not /dev/ttyprintk0.
+ * Applicable only when a driver for a single tty device is
+ * being allocated.
*/
#define TTY_DRIVER_INSTALLED 0x0001
#define TTY_DRIVER_RESET_TERMIOS 0x0002
@@ -387,6 +406,8 @@ static inline struct tty_driver *tty_driver_kref_get(struct tty_driver *d)
#define TTY_DRIVER_DYNAMIC_DEV 0x0008
#define TTY_DRIVER_DEVPTS_MEM 0x0010
#define TTY_DRIVER_HARDWARE_BREAK 0x0020
+#define TTY_DRIVER_DYNAMIC_ALLOC 0x0040
+#define TTY_DRIVER_UNNUMBERED_NODE 0x0080
/* tty driver types */
#define TTY_DRIVER_TYPE_SYSTEM 0x0001
diff --git a/include/linux/tty_flags.h b/include/linux/tty_flags.h
new file mode 100644
index 00000000000..eefcb483a2c
--- /dev/null
+++ b/include/linux/tty_flags.h
@@ -0,0 +1,78 @@
+#ifndef _LINUX_TTY_FLAGS_H
+#define _LINUX_TTY_FLAGS_H
+
+/*
+ * Definitions for async_struct (and serial_struct) flags field also
+ * shared by the tty_port flags structures.
+ *
+ * Define ASYNCB_* for convenient use with {test,set,clear}_bit.
+ */
+#define ASYNCB_HUP_NOTIFY 0 /* Notify getty on hangups and closes
+ * on the callout port */
+#define ASYNCB_FOURPORT 1 /* Set OU1, OUT2 per AST Fourport settings */
+#define ASYNCB_SAK 2 /* Secure Attention Key (Orange book) */
+#define ASYNCB_SPLIT_TERMIOS 3 /* Separate termios for dialin/callout */
+#define ASYNCB_SPD_HI 4 /* Use 56000 instead of 38400 bps */
+#define ASYNCB_SPD_VHI 5 /* Use 115200 instead of 38400 bps */
+#define ASYNCB_SKIP_TEST 6 /* Skip UART test during autoconfiguration */
+#define ASYNCB_AUTO_IRQ 7 /* Do automatic IRQ during
+ * autoconfiguration */
+#define ASYNCB_SESSION_LOCKOUT 8 /* Lock out cua opens based on session */
+#define ASYNCB_PGRP_LOCKOUT 9 /* Lock out cua opens based on pgrp */
+#define ASYNCB_CALLOUT_NOHUP 10 /* Don't do hangups for cua device */
+#define ASYNCB_HARDPPS_CD 11 /* Call hardpps when CD goes high */
+#define ASYNCB_SPD_SHI 12 /* Use 230400 instead of 38400 bps */
+#define ASYNCB_LOW_LATENCY 13 /* Request low latency behaviour */
+#define ASYNCB_BUGGY_UART 14 /* This is a buggy UART, skip some safety
+ * checks. Note: can be dangerous! */
+#define ASYNCB_AUTOPROBE 15 /* Port was autoprobed by PCI or PNP code */
+#define ASYNCB_LAST_USER 15
+
+/* Internal flags used only by kernel */
+#define ASYNCB_INITIALIZED 31 /* Serial port was initialized */
+#define ASYNCB_SUSPENDED 30 /* Serial port is suspended */
+#define ASYNCB_NORMAL_ACTIVE 29 /* Normal device is active */
+#define ASYNCB_BOOT_AUTOCONF 28 /* Autoconfigure port on bootup */
+#define ASYNCB_CLOSING 27 /* Serial port is closing */
+#define ASYNCB_CTS_FLOW 26 /* Do CTS flow control */
+#define ASYNCB_CHECK_CD 25 /* i.e., CLOCAL */
+#define ASYNCB_SHARE_IRQ 24 /* for multifunction cards, no longer used */
+#define ASYNCB_CONS_FLOW 23 /* flow control for console */
+#define ASYNCB_FIRST_KERNEL 22
+
+#define ASYNC_HUP_NOTIFY (1U << ASYNCB_HUP_NOTIFY)
+#define ASYNC_SUSPENDED (1U << ASYNCB_SUSPENDED)
+#define ASYNC_FOURPORT (1U << ASYNCB_FOURPORT)
+#define ASYNC_SAK (1U << ASYNCB_SAK)
+#define ASYNC_SPLIT_TERMIOS (1U << ASYNCB_SPLIT_TERMIOS)
+#define ASYNC_SPD_HI (1U << ASYNCB_SPD_HI)
+#define ASYNC_SPD_VHI (1U << ASYNCB_SPD_VHI)
+#define ASYNC_SKIP_TEST (1U << ASYNCB_SKIP_TEST)
+#define ASYNC_AUTO_IRQ (1U << ASYNCB_AUTO_IRQ)
+#define ASYNC_SESSION_LOCKOUT (1U << ASYNCB_SESSION_LOCKOUT)
+#define ASYNC_PGRP_LOCKOUT (1U << ASYNCB_PGRP_LOCKOUT)
+#define ASYNC_CALLOUT_NOHUP (1U << ASYNCB_CALLOUT_NOHUP)
+#define ASYNC_HARDPPS_CD (1U << ASYNCB_HARDPPS_CD)
+#define ASYNC_SPD_SHI (1U << ASYNCB_SPD_SHI)
+#define ASYNC_LOW_LATENCY (1U << ASYNCB_LOW_LATENCY)
+#define ASYNC_BUGGY_UART (1U << ASYNCB_BUGGY_UART)
+#define ASYNC_AUTOPROBE (1U << ASYNCB_AUTOPROBE)
+
+#define ASYNC_FLAGS ((1U << (ASYNCB_LAST_USER + 1)) - 1)
+#define ASYNC_USR_MASK (ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \
+ ASYNC_LOW_LATENCY)
+#define ASYNC_SPD_CUST (ASYNC_SPD_HI|ASYNC_SPD_VHI)
+#define ASYNC_SPD_WARP (ASYNC_SPD_HI|ASYNC_SPD_SHI)
+#define ASYNC_SPD_MASK (ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)
+
+#define ASYNC_INITIALIZED (1U << ASYNCB_INITIALIZED)
+#define ASYNC_NORMAL_ACTIVE (1U << ASYNCB_NORMAL_ACTIVE)
+#define ASYNC_BOOT_AUTOCONF (1U << ASYNCB_BOOT_AUTOCONF)
+#define ASYNC_CLOSING (1U << ASYNCB_CLOSING)
+#define ASYNC_CTS_FLOW (1U << ASYNCB_CTS_FLOW)
+#define ASYNC_CHECK_CD (1U << ASYNCB_CHECK_CD)
+#define ASYNC_SHARE_IRQ (1U << ASYNCB_SHARE_IRQ)
+#define ASYNC_CONS_FLOW (1U << ASYNCB_CONS_FLOW)
+#define ASYNC_INTERNAL_FLAGS (~((1U << ASYNCB_FIRST_KERNEL) - 1))
+
+#endif
diff --git a/include/net/irda/ircomm_tty.h b/include/net/irda/ircomm_tty.h
index 59ba38bc400..80ffde3bb16 100644
--- a/include/net/irda/ircomm_tty.h
+++ b/include/net/irda/ircomm_tty.h
@@ -52,21 +52,16 @@
/* Same for payload size. See qos.c for the smallest max data size */
#define IRCOMM_TTY_DATA_UNINITIALISED (64 - IRCOMM_TTY_HDR_UNINITIALISED)
-/* Those are really defined in include/linux/serial.h - Jean II */
-#define ASYNC_B_INITIALIZED 31 /* Serial port was initialized */
-#define ASYNC_B_NORMAL_ACTIVE 29 /* Normal device is active */
-#define ASYNC_B_CLOSING 27 /* Serial port is closing */
-
/*
* IrCOMM TTY driver state
*/
struct ircomm_tty_cb {
irda_queue_t queue; /* Must be first */
+ struct tty_port port;
magic_t magic;
int state; /* Connect state */
- struct tty_struct *tty;
struct ircomm_cb *ircomm; /* IrCOMM layer instance */
struct sk_buff *tx_skb; /* Transmit buffer */
@@ -80,7 +75,6 @@ struct ircomm_tty_cb {
LOCAL_FLOW flow; /* IrTTP flow status */
int line;
- unsigned long flags;
__u8 dlsap_sel;
__u8 slsap_sel;
@@ -97,19 +91,10 @@ struct ircomm_tty_cb {
void *skey;
void *ckey;
- wait_queue_head_t open_wait;
- wait_queue_head_t close_wait;
struct timer_list watchdog_timer;
struct work_struct tqueue;
- unsigned short close_delay;
- unsigned short closing_wait; /* time to wait before closing */
-
- int open_count;
- int blocked_open; /* # of blocked opens */
-
/* Protect concurent access to :
- * o self->open_count
* o self->ctrl_skb
* o self->tx_skb
* Maybe other things may gain to be protected as well...
diff --git a/include/net/netfilter/nf_conntrack_ecache.h b/include/net/netfilter/nf_conntrack_ecache.h
index e1ce1048fe5..4a045cda9c6 100644
--- a/include/net/netfilter/nf_conntrack_ecache.h
+++ b/include/net/netfilter/nf_conntrack_ecache.h
@@ -18,6 +18,7 @@ struct nf_conntrack_ecache {
u16 ctmask; /* bitmask of ct events to be delivered */
u16 expmask; /* bitmask of expect events to be delivered */
u32 pid; /* netlink pid of destroyer */
+ struct timer_list timeout;
};
static inline struct nf_conntrack_ecache *
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index bd92431d4c4..4ada3be6e25 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -2562,7 +2562,7 @@ int mpol_to_str(char *buffer, int maxlen, struct mempolicy *pol, int no_context)
break;
default:
- BUG();
+ return -EINVAL;
}
l = strlen(policy_modes[mode]);
diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c
index 56f182393c4..ccc248791d5 100644
--- a/net/bluetooth/rfcomm/tty.c
+++ b/net/bluetooth/rfcomm/tty.c
@@ -278,8 +278,8 @@ out:
if (err < 0)
goto free;
- dev->tty_dev = tty_register_device(rfcomm_tty_driver, dev->id, NULL);
-
+ dev->tty_dev = tty_port_register_device(&dev->port, rfcomm_tty_driver,
+ dev->id, NULL);
if (IS_ERR(dev->tty_dev)) {
err = PTR_ERR(dev->tty_dev);
list_del(&dev->list);
@@ -705,9 +705,9 @@ static int rfcomm_tty_open(struct tty_struct *tty, struct file *filp)
break;
}
- tty_unlock();
+ tty_unlock(tty);
schedule();
- tty_lock();
+ tty_lock(tty);
}
set_current_state(TASK_RUNNING);
remove_wait_queue(&dev->wait, &wait);
@@ -861,7 +861,7 @@ static int rfcomm_tty_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned l
static void rfcomm_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
{
- struct ktermios *new = tty->termios;
+ struct ktermios *new = &tty->termios;
int old_baud_rate = tty_termios_baud_rate(old);
int new_baud_rate = tty_termios_baud_rate(new);
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index 346b1eb83a1..e4ba3e70c17 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -168,24 +168,16 @@ static void poll_napi(struct net_device *dev)
struct napi_struct *napi;
int budget = 16;
- WARN_ON_ONCE(!irqs_disabled());
-
list_for_each_entry(napi, &dev->napi_list, dev_list) {
- local_irq_enable();
if (napi->poll_owner != smp_processor_id() &&
spin_trylock(&napi->poll_lock)) {
- rcu_read_lock_bh();
budget = poll_one_napi(rcu_dereference_bh(dev->npinfo),
napi, budget);
- rcu_read_unlock_bh();
spin_unlock(&napi->poll_lock);
- if (!budget) {
- local_irq_disable();
+ if (!budget)
break;
- }
}
- local_irq_disable();
}
}
diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c
index 8eec8f4a053..ebdf06f938b 100644
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -124,6 +124,8 @@ static DEFINE_SPINLOCK(mfc_unres_lock);
static struct kmem_cache *mrt_cachep __read_mostly;
static struct mr_table *ipmr_new_table(struct net *net, u32 id);
+static void ipmr_free_table(struct mr_table *mrt);
+
static int ip_mr_forward(struct net *net, struct mr_table *mrt,
struct sk_buff *skb, struct mfc_cache *cache,
int local);
@@ -131,6 +133,7 @@ static int ipmr_cache_report(struct mr_table *mrt,
struct sk_buff *pkt, vifi_t vifi, int assert);
static int __ipmr_fill_mroute(struct mr_table *mrt, struct sk_buff *skb,
struct mfc_cache *c, struct rtmsg *rtm);
+static void mroute_clean_tables(struct mr_table *mrt);
static void ipmr_expire_process(unsigned long arg);
#ifdef CONFIG_IP_MROUTE_MULTIPLE_TABLES
@@ -271,7 +274,7 @@ static void __net_exit ipmr_rules_exit(struct net *net)
list_for_each_entry_safe(mrt, next, &net->ipv4.mr_tables, list) {
list_del(&mrt->list);
- kfree(mrt);
+ ipmr_free_table(mrt);
}
fib_rules_unregister(net->ipv4.mr_rules_ops);
}
@@ -299,7 +302,7 @@ static int __net_init ipmr_rules_init(struct net *net)
static void __net_exit ipmr_rules_exit(struct net *net)
{
- kfree(net->ipv4.mrt);
+ ipmr_free_table(net->ipv4.mrt);
}
#endif
@@ -336,6 +339,13 @@ static struct mr_table *ipmr_new_table(struct net *net, u32 id)
return mrt;
}
+static void ipmr_free_table(struct mr_table *mrt)
+{
+ del_timer_sync(&mrt->ipmr_expire_timer);
+ mroute_clean_tables(mrt);
+ kfree(mrt);
+}
+
/* Service routines creating virtual interfaces: DVMRP tunnels and PIMREG */
static void ipmr_del_tunnel(struct net_device *dev, struct vifctl *v)
diff --git a/net/ipv4/netfilter/nf_nat_sip.c b/net/ipv4/netfilter/nf_nat_sip.c
index 4ad9cf17399..9c87cde28ff 100644
--- a/net/ipv4/netfilter/nf_nat_sip.c
+++ b/net/ipv4/netfilter/nf_nat_sip.c
@@ -502,7 +502,10 @@ static unsigned int ip_nat_sdp_media(struct sk_buff *skb, unsigned int dataoff,
ret = nf_ct_expect_related(rtcp_exp);
if (ret == 0)
break;
- else if (ret != -EBUSY) {
+ else if (ret == -EBUSY) {
+ nf_ct_unexpect_related(rtp_exp);
+ continue;
+ } else if (ret < 0) {
nf_ct_unexpect_related(rtp_exp);
port = 0;
break;
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index fd9ecb52c66..82cf2a722b2 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -934,12 +934,14 @@ static u32 __ip_rt_update_pmtu(struct rtable *rt, struct flowi4 *fl4, u32 mtu)
if (mtu < ip_rt_min_pmtu)
mtu = ip_rt_min_pmtu;
+ rcu_read_lock();
if (fib_lookup(dev_net(rt->dst.dev), fl4, &res) == 0) {
struct fib_nh *nh = &FIB_RES_NH(res);
update_or_create_fnhe(nh, fl4->daddr, 0, mtu,
jiffies + ip_rt_mtu_expires);
}
+ rcu_read_unlock();
return mtu;
}
@@ -956,7 +958,7 @@ static void ip_rt_update_pmtu(struct dst_entry *dst, struct sock *sk,
dst->obsolete = DST_OBSOLETE_KILL;
} else {
rt->rt_pmtu = mtu;
- dst_set_expires(&rt->dst, ip_rt_mtu_expires);
+ rt->dst.expires = max(1UL, jiffies + ip_rt_mtu_expires);
}
}
@@ -1263,7 +1265,7 @@ static void ipv4_dst_destroy(struct dst_entry *dst)
{
struct rtable *rt = (struct rtable *) dst;
- if (dst->flags & DST_NOCACHE) {
+ if (!list_empty(&rt->rt_uncached)) {
spin_lock_bh(&rt_uncached_lock);
list_del(&rt->rt_uncached);
spin_unlock_bh(&rt_uncached_lock);
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 85308b90df8..6e38c6c23ca 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -2926,13 +2926,14 @@ static void tcp_enter_recovery(struct sock *sk, bool ece_ack)
* tcp_xmit_retransmit_queue().
*/
static void tcp_fastretrans_alert(struct sock *sk, int pkts_acked,
- int newly_acked_sacked, bool is_dupack,
+ int prior_sacked, bool is_dupack,
int flag)
{
struct inet_connection_sock *icsk = inet_csk(sk);
struct tcp_sock *tp = tcp_sk(sk);
int do_lost = is_dupack || ((flag & FLAG_DATA_SACKED) &&
(tcp_fackets_out(tp) > tp->reordering));
+ int newly_acked_sacked = 0;
int fast_rexmit = 0;
if (WARN_ON(!tp->packets_out && tp->sacked_out))
@@ -2992,6 +2993,7 @@ static void tcp_fastretrans_alert(struct sock *sk, int pkts_acked,
tcp_add_reno_sack(sk);
} else
do_lost = tcp_try_undo_partial(sk, pkts_acked);
+ newly_acked_sacked = pkts_acked + tp->sacked_out - prior_sacked;
break;
case TCP_CA_Loss:
if (flag & FLAG_DATA_ACKED)
@@ -3013,6 +3015,7 @@ static void tcp_fastretrans_alert(struct sock *sk, int pkts_acked,
if (is_dupack)
tcp_add_reno_sack(sk);
}
+ newly_acked_sacked = pkts_acked + tp->sacked_out - prior_sacked;
if (icsk->icsk_ca_state <= TCP_CA_Disorder)
tcp_try_undo_dsack(sk);
@@ -3590,7 +3593,6 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag)
int prior_packets;
int prior_sacked = tp->sacked_out;
int pkts_acked = 0;
- int newly_acked_sacked = 0;
bool frto_cwnd = false;
/* If the ack is older than previous acks
@@ -3666,8 +3668,6 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag)
flag |= tcp_clean_rtx_queue(sk, prior_fackets, prior_snd_una);
pkts_acked = prior_packets - tp->packets_out;
- newly_acked_sacked = (prior_packets - prior_sacked) -
- (tp->packets_out - tp->sacked_out);
if (tp->frto_counter)
frto_cwnd = tcp_process_frto(sk, flag);
@@ -3681,7 +3681,7 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag)
tcp_may_raise_cwnd(sk, flag))
tcp_cong_avoid(sk, ack, prior_in_flight);
is_dupack = !(flag & (FLAG_SND_UNA_ADVANCED | FLAG_NOT_DUP));
- tcp_fastretrans_alert(sk, pkts_acked, newly_acked_sacked,
+ tcp_fastretrans_alert(sk, pkts_acked, prior_sacked,
is_dupack, flag);
} else {
if ((flag & FLAG_DATA_ACKED) && !frto_cwnd)
@@ -3698,7 +3698,7 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag)
no_queue:
/* If data was DSACKed, see if we can undo a cwnd reduction. */
if (flag & FLAG_DSACKING_ACK)
- tcp_fastretrans_alert(sk, pkts_acked, newly_acked_sacked,
+ tcp_fastretrans_alert(sk, pkts_acked, prior_sacked,
is_dupack, flag);
/* If this ack opens up a zero window, clear backoff. It was
* being used to time the probes, and is probably far higher than
@@ -3718,8 +3718,7 @@ old_ack:
*/
if (TCP_SKB_CB(skb)->sacked) {
flag |= tcp_sacktag_write_queue(sk, skb, prior_snd_una);
- newly_acked_sacked = tp->sacked_out - prior_sacked;
- tcp_fastretrans_alert(sk, pkts_acked, newly_acked_sacked,
+ tcp_fastretrans_alert(sk, pkts_acked, prior_sacked,
is_dupack, flag);
}
diff --git a/net/ipv6/esp6.c b/net/ipv6/esp6.c
index 6dc7fd353ef..282f3723ee1 100644
--- a/net/ipv6/esp6.c
+++ b/net/ipv6/esp6.c
@@ -167,8 +167,6 @@ static int esp6_output(struct xfrm_state *x, struct sk_buff *skb)
struct esp_data *esp = x->data;
/* skb is pure payload to encrypt */
- err = -ENOMEM;
-
aead = esp->aead;
alen = crypto_aead_authsize(aead);
@@ -203,8 +201,10 @@ static int esp6_output(struct xfrm_state *x, struct sk_buff *skb)
}
tmp = esp_alloc_tmp(aead, nfrags + sglists, seqhilen);
- if (!tmp)
+ if (!tmp) {
+ err = -ENOMEM;
goto error;
+ }
seqhi = esp_tmp_seqhi(tmp);
iv = esp_tmp_iv(aead, tmp, seqhilen);
diff --git a/net/irda/ircomm/ircomm_param.c b/net/irda/ircomm/ircomm_param.c
index 8b915f3ac3b..30893912835 100644
--- a/net/irda/ircomm/ircomm_param.c
+++ b/net/irda/ircomm/ircomm_param.c
@@ -99,7 +99,6 @@ pi_param_info_t ircomm_param_info = { pi_major_call_table, 3, 0x0f, 4 };
*/
int ircomm_param_request(struct ircomm_tty_cb *self, __u8 pi, int flush)
{
- struct tty_struct *tty;
unsigned long flags;
struct sk_buff *skb;
int count;
@@ -109,10 +108,6 @@ int ircomm_param_request(struct ircomm_tty_cb *self, __u8 pi, int flush)
IRDA_ASSERT(self != NULL, return -1;);
IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
- tty = self->tty;
- if (!tty)
- return 0;
-
/* Make sure we don't send parameters for raw mode */
if (self->service_type == IRCOMM_3_WIRE_RAW)
return 0;
diff --git a/net/irda/ircomm/ircomm_tty.c b/net/irda/ircomm/ircomm_tty.c
index 6b9d5a0e42f..95a3a7a336b 100644
--- a/net/irda/ircomm/ircomm_tty.c
+++ b/net/irda/ircomm/ircomm_tty.c
@@ -52,6 +52,8 @@
#include <net/irda/ircomm_tty_attach.h>
#include <net/irda/ircomm_tty.h>
+static int ircomm_tty_install(struct tty_driver *driver,
+ struct tty_struct *tty);
static int ircomm_tty_open(struct tty_struct *tty, struct file *filp);
static void ircomm_tty_close(struct tty_struct * tty, struct file *filp);
static int ircomm_tty_write(struct tty_struct * tty,
@@ -82,6 +84,7 @@ static struct tty_driver *driver;
static hashbin_t *ircomm_tty = NULL;
static const struct tty_operations ops = {
+ .install = ircomm_tty_install,
.open = ircomm_tty_open,
.close = ircomm_tty_close,
.write = ircomm_tty_write,
@@ -104,6 +107,35 @@ static const struct tty_operations ops = {
#endif /* CONFIG_PROC_FS */
};
+static void ircomm_port_raise_dtr_rts(struct tty_port *port, int raise)
+{
+ struct ircomm_tty_cb *self = container_of(port, struct ircomm_tty_cb,
+ port);
+ /*
+ * Here, we use to lock those two guys, but as ircomm_param_request()
+ * does it itself, I don't see the point (and I see the deadlock).
+ * Jean II
+ */
+ if (raise)
+ self->settings.dte |= IRCOMM_RTS | IRCOMM_DTR;
+ else
+ self->settings.dte &= ~(IRCOMM_RTS | IRCOMM_DTR);
+
+ ircomm_param_request(self, IRCOMM_DTE, TRUE);
+}
+
+static int ircomm_port_carrier_raised(struct tty_port *port)
+{
+ struct ircomm_tty_cb *self = container_of(port, struct ircomm_tty_cb,
+ port);
+ return self->settings.dce & IRCOMM_CD;
+}
+
+static const struct tty_port_operations ircomm_port_ops = {
+ .dtr_rts = ircomm_port_raise_dtr_rts,
+ .carrier_raised = ircomm_port_carrier_raised,
+};
+
/*
* Function ircomm_tty_init()
*
@@ -194,7 +226,7 @@ static int ircomm_tty_startup(struct ircomm_tty_cb *self)
IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
/* Check if already open */
- if (test_and_set_bit(ASYNC_B_INITIALIZED, &self->flags)) {
+ if (test_and_set_bit(ASYNCB_INITIALIZED, &self->port.flags)) {
IRDA_DEBUG(2, "%s(), already open so break out!\n", __func__ );
return 0;
}
@@ -231,7 +263,7 @@ static int ircomm_tty_startup(struct ircomm_tty_cb *self)
return 0;
err:
- clear_bit(ASYNC_B_INITIALIZED, &self->flags);
+ clear_bit(ASYNCB_INITIALIZED, &self->port.flags);
return ret;
}
@@ -242,72 +274,62 @@ err:
*
*/
static int ircomm_tty_block_til_ready(struct ircomm_tty_cb *self,
- struct file *filp)
+ struct tty_struct *tty, struct file *filp)
{
+ struct tty_port *port = &self->port;
DECLARE_WAITQUEUE(wait, current);
int retval;
int do_clocal = 0, extra_count = 0;
unsigned long flags;
- struct tty_struct *tty;
IRDA_DEBUG(2, "%s()\n", __func__ );
- tty = self->tty;
-
/*
* If non-blocking mode is set, or the port is not enabled,
* then make the check up front and then exit.
*/
if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
/* nonblock mode is set or port is not enabled */
- self->flags |= ASYNC_NORMAL_ACTIVE;
+ port->flags |= ASYNC_NORMAL_ACTIVE;
IRDA_DEBUG(1, "%s(), O_NONBLOCK requested!\n", __func__ );
return 0;
}
- if (tty->termios->c_cflag & CLOCAL) {
+ if (tty->termios.c_cflag & CLOCAL) {
IRDA_DEBUG(1, "%s(), doing CLOCAL!\n", __func__ );
do_clocal = 1;
}
/* Wait for carrier detect and the line to become
* free (i.e., not in use by the callout). While we are in
- * this loop, self->open_count is dropped by one, so that
+ * this loop, port->count is dropped by one, so that
* mgsl_close() knows when to free things. We restore it upon
* exit, either normal or abnormal.
*/
retval = 0;
- add_wait_queue(&self->open_wait, &wait);
+ add_wait_queue(&port->open_wait, &wait);
IRDA_DEBUG(2, "%s(%d):block_til_ready before block on %s open_count=%d\n",
- __FILE__,__LINE__, tty->driver->name, self->open_count );
+ __FILE__, __LINE__, tty->driver->name, port->count);
- /* As far as I can see, we protect open_count - Jean II */
- spin_lock_irqsave(&self->spinlock, flags);
+ spin_lock_irqsave(&port->lock, flags);
if (!tty_hung_up_p(filp)) {
extra_count = 1;
- self->open_count--;
+ port->count--;
}
- spin_unlock_irqrestore(&self->spinlock, flags);
- self->blocked_open++;
+ spin_unlock_irqrestore(&port->lock, flags);
+ port->blocked_open++;
while (1) {
- if (tty->termios->c_cflag & CBAUD) {
- /* Here, we use to lock those two guys, but
- * as ircomm_param_request() does it itself,
- * I don't see the point (and I see the deadlock).
- * Jean II */
- self->settings.dte |= IRCOMM_RTS + IRCOMM_DTR;
-
- ircomm_param_request(self, IRCOMM_DTE, TRUE);
- }
+ if (tty->termios.c_cflag & CBAUD)
+ tty_port_raise_dtr_rts(port);
current->state = TASK_INTERRUPTIBLE;
if (tty_hung_up_p(filp) ||
- !test_bit(ASYNC_B_INITIALIZED, &self->flags)) {
- retval = (self->flags & ASYNC_HUP_NOTIFY) ?
+ !test_bit(ASYNCB_INITIALIZED, &port->flags)) {
+ retval = (port->flags & ASYNC_HUP_NOTIFY) ?
-EAGAIN : -ERESTARTSYS;
break;
}
@@ -317,8 +339,8 @@ static int ircomm_tty_block_til_ready(struct ircomm_tty_cb *self,
* specified, we cannot return before the IrCOMM link is
* ready
*/
- if (!test_bit(ASYNC_B_CLOSING, &self->flags) &&
- (do_clocal || (self->settings.dce & IRCOMM_CD)) &&
+ if (!test_bit(ASYNCB_CLOSING, &port->flags) &&
+ (do_clocal || tty_port_carrier_raised(port)) &&
self->state == IRCOMM_TTY_READY)
{
break;
@@ -330,46 +352,36 @@ static int ircomm_tty_block_til_ready(struct ircomm_tty_cb *self,
}
IRDA_DEBUG(1, "%s(%d):block_til_ready blocking on %s open_count=%d\n",
- __FILE__,__LINE__, tty->driver->name, self->open_count );
+ __FILE__, __LINE__, tty->driver->name, port->count);
schedule();
}
__set_current_state(TASK_RUNNING);
- remove_wait_queue(&self->open_wait, &wait);
+ remove_wait_queue(&port->open_wait, &wait);
if (extra_count) {
/* ++ is not atomic, so this should be protected - Jean II */
- spin_lock_irqsave(&self->spinlock, flags);
- self->open_count++;
- spin_unlock_irqrestore(&self->spinlock, flags);
+ spin_lock_irqsave(&port->lock, flags);
+ port->count++;
+ spin_unlock_irqrestore(&port->lock, flags);
}
- self->blocked_open--;
+ port->blocked_open--;
IRDA_DEBUG(1, "%s(%d):block_til_ready after blocking on %s open_count=%d\n",
- __FILE__,__LINE__, tty->driver->name, self->open_count);
+ __FILE__, __LINE__, tty->driver->name, port->count);
if (!retval)
- self->flags |= ASYNC_NORMAL_ACTIVE;
+ port->flags |= ASYNC_NORMAL_ACTIVE;
return retval;
}
-/*
- * Function ircomm_tty_open (tty, filp)
- *
- * This routine is called when a particular tty device is opened. This
- * routine is mandatory; if this routine is not filled in, the attempted
- * open will fail with ENODEV.
- */
-static int ircomm_tty_open(struct tty_struct *tty, struct file *filp)
+
+static int ircomm_tty_install(struct tty_driver *driver, struct tty_struct *tty)
{
struct ircomm_tty_cb *self;
unsigned int line = tty->index;
- unsigned long flags;
- int ret;
-
- IRDA_DEBUG(2, "%s()\n", __func__ );
/* Check if instance already exists */
self = hashbin_lock_find(ircomm_tty, line, NULL);
@@ -381,6 +393,8 @@ static int ircomm_tty_open(struct tty_struct *tty, struct file *filp)
return -ENOMEM;
}
+ tty_port_init(&self->port);
+ self->port.ops = &ircomm_port_ops;
self->magic = IRCOMM_TTY_MAGIC;
self->flow = FLOW_STOP;
@@ -388,13 +402,9 @@ static int ircomm_tty_open(struct tty_struct *tty, struct file *filp)
INIT_WORK(&self->tqueue, ircomm_tty_do_softint);
self->max_header_size = IRCOMM_TTY_HDR_UNINITIALISED;
self->max_data_size = IRCOMM_TTY_DATA_UNINITIALISED;
- self->close_delay = 5*HZ/10;
- self->closing_wait = 30*HZ;
/* Init some important stuff */
init_timer(&self->watchdog_timer);
- init_waitqueue_head(&self->open_wait);
- init_waitqueue_head(&self->close_wait);
spin_lock_init(&self->spinlock);
/*
@@ -404,31 +414,48 @@ static int ircomm_tty_open(struct tty_struct *tty, struct file *filp)
*
* Note this is completely usafe and doesn't work properly
*/
- tty->termios->c_iflag = 0;
- tty->termios->c_oflag = 0;
+ tty->termios.c_iflag = 0;
+ tty->termios.c_oflag = 0;
/* Insert into hash */
hashbin_insert(ircomm_tty, (irda_queue_t *) self, line, NULL);
}
- /* ++ is not atomic, so this should be protected - Jean II */
- spin_lock_irqsave(&self->spinlock, flags);
- self->open_count++;
- tty->driver_data = self;
- self->tty = tty;
- spin_unlock_irqrestore(&self->spinlock, flags);
+ return tty_port_install(&self->port, driver, tty);
+}
+
+/*
+ * Function ircomm_tty_open (tty, filp)
+ *
+ * This routine is called when a particular tty device is opened. This
+ * routine is mandatory; if this routine is not filled in, the attempted
+ * open will fail with ENODEV.
+ */
+static int ircomm_tty_open(struct tty_struct *tty, struct file *filp)
+{
+ struct ircomm_tty_cb *self = tty->driver_data;
+ unsigned long flags;
+ int ret;
+
+ IRDA_DEBUG(2, "%s()\n", __func__ );
+
+ /* ++ is not atomic, so this should be protected - Jean II */
+ spin_lock_irqsave(&self->port.lock, flags);
+ self->port.count++;
+ spin_unlock_irqrestore(&self->port.lock, flags);
+ tty_port_tty_set(&self->port, tty);
IRDA_DEBUG(1, "%s(), %s%d, count = %d\n", __func__ , tty->driver->name,
- self->line, self->open_count);
+ self->line, self->port.count);
/* Not really used by us, but lets do it anyway */
- self->tty->low_latency = (self->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+ tty->low_latency = (self->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
/*
* If the port is the middle of closing, bail out now
*/
if (tty_hung_up_p(filp) ||
- test_bit(ASYNC_B_CLOSING, &self->flags)) {
+ test_bit(ASYNCB_CLOSING, &self->port.flags)) {
/* Hm, why are we blocking on ASYNC_CLOSING if we
* do return -EAGAIN/-ERESTARTSYS below anyway?
@@ -438,14 +465,15 @@ static int ircomm_tty_open(struct tty_struct *tty, struct file *filp)
* probably better sleep uninterruptible?
*/
- if (wait_event_interruptible(self->close_wait, !test_bit(ASYNC_B_CLOSING, &self->flags))) {
+ if (wait_event_interruptible(self->port.close_wait,
+ !test_bit(ASYNCB_CLOSING, &self->port.flags))) {
IRDA_WARNING("%s - got signal while blocking on ASYNC_CLOSING!\n",
__func__);
return -ERESTARTSYS;
}
#ifdef SERIAL_DO_RESTART
- return (self->flags & ASYNC_HUP_NOTIFY) ?
+ return (self->port.flags & ASYNC_HUP_NOTIFY) ?
-EAGAIN : -ERESTARTSYS;
#else
return -EAGAIN;
@@ -453,7 +481,7 @@ static int ircomm_tty_open(struct tty_struct *tty, struct file *filp)
}
/* Check if this is a "normal" ircomm device, or an irlpt device */
- if (line < 0x10) {
+ if (self->line < 0x10) {
self->service_type = IRCOMM_3_WIRE | IRCOMM_9_WIRE;
self->settings.service_type = IRCOMM_9_WIRE; /* 9 wire as default */
/* Jan Kiszka -> add DSR/RI -> Conform to IrCOMM spec */
@@ -469,7 +497,7 @@ static int ircomm_tty_open(struct tty_struct *tty, struct file *filp)
if (ret)
return ret;
- ret = ircomm_tty_block_til_ready(self, filp);
+ ret = ircomm_tty_block_til_ready(self, tty, filp);
if (ret) {
IRDA_DEBUG(2,
"%s(), returning after block_til_ready with %d\n", __func__ ,
@@ -489,81 +517,22 @@ static int ircomm_tty_open(struct tty_struct *tty, struct file *filp)
static void ircomm_tty_close(struct tty_struct *tty, struct file *filp)
{
struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
- unsigned long flags;
+ struct tty_port *port = &self->port;
IRDA_DEBUG(0, "%s()\n", __func__ );
IRDA_ASSERT(self != NULL, return;);
IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
- spin_lock_irqsave(&self->spinlock, flags);
-
- if (tty_hung_up_p(filp)) {
- spin_unlock_irqrestore(&self->spinlock, flags);
-
- IRDA_DEBUG(0, "%s(), returning 1\n", __func__ );
- return;
- }
-
- if ((tty->count == 1) && (self->open_count != 1)) {
- /*
- * Uh, oh. tty->count is 1, which means that the tty
- * structure will be freed. state->count should always
- * be one in these conditions. If it's greater than
- * one, we've got real problems, since it means the
- * serial port won't be shutdown.
- */
- IRDA_DEBUG(0, "%s(), bad serial port count; "
- "tty->count is 1, state->count is %d\n", __func__ ,
- self->open_count);
- self->open_count = 1;
- }
-
- if (--self->open_count < 0) {
- IRDA_ERROR("%s(), bad serial port count for ttys%d: %d\n",
- __func__, self->line, self->open_count);
- self->open_count = 0;
- }
- if (self->open_count) {
- spin_unlock_irqrestore(&self->spinlock, flags);
-
- IRDA_DEBUG(0, "%s(), open count > 0\n", __func__ );
+ if (tty_port_close_start(port, tty, filp) == 0)
return;
- }
-
- /* Hum... Should be test_and_set_bit ??? - Jean II */
- set_bit(ASYNC_B_CLOSING, &self->flags);
-
- /* We need to unlock here (we were unlocking at the end of this
- * function), because tty_wait_until_sent() may schedule.
- * I don't know if the rest should be protected somehow,
- * so someone should check. - Jean II */
- spin_unlock_irqrestore(&self->spinlock, flags);
-
- /*
- * Now we wait for the transmit buffer to clear; and we notify
- * the line discipline to only process XON/XOFF characters.
- */
- tty->closing = 1;
- if (self->closing_wait != ASYNC_CLOSING_WAIT_NONE)
- tty_wait_until_sent_from_close(tty, self->closing_wait);
ircomm_tty_shutdown(self);
tty_driver_flush_buffer(tty);
- tty_ldisc_flush(tty);
-
- tty->closing = 0;
- self->tty = NULL;
- if (self->blocked_open) {
- if (self->close_delay)
- schedule_timeout_interruptible(self->close_delay);
- wake_up_interruptible(&self->open_wait);
- }
-
- self->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
- wake_up_interruptible(&self->close_wait);
+ tty_port_close_end(port, tty);
+ tty_port_tty_set(port, NULL);
}
/*
@@ -606,7 +575,7 @@ static void ircomm_tty_do_softint(struct work_struct *work)
if (!self || self->magic != IRCOMM_TTY_MAGIC)
return;
- tty = self->tty;
+ tty = tty_port_tty_get(&self->port);
if (!tty)
return;
@@ -627,7 +596,7 @@ static void ircomm_tty_do_softint(struct work_struct *work)
}
if (tty->hw_stopped)
- return;
+ goto put;
/* Unlink transmit buffer */
spin_lock_irqsave(&self->spinlock, flags);
@@ -646,6 +615,8 @@ static void ircomm_tty_do_softint(struct work_struct *work)
/* Check if user (still) wants to be waken up */
tty_wakeup(tty);
+put:
+ tty_kref_put(tty);
}
/*
@@ -880,7 +851,7 @@ static void ircomm_tty_throttle(struct tty_struct *tty)
ircomm_tty_send_xchar(tty, STOP_CHAR(tty));
/* Hardware flow control? */
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
self->settings.dte &= ~IRCOMM_RTS;
self->settings.dte |= IRCOMM_DELTA_RTS;
@@ -912,7 +883,7 @@ static void ircomm_tty_unthrottle(struct tty_struct *tty)
}
/* Using hardware flow control? */
- if (tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios.c_cflag & CRTSCTS) {
self->settings.dte |= (IRCOMM_RTS|IRCOMM_DELTA_RTS);
ircomm_param_request(self, IRCOMM_DTE, TRUE);
@@ -955,7 +926,7 @@ static void ircomm_tty_shutdown(struct ircomm_tty_cb *self)
IRDA_DEBUG(0, "%s()\n", __func__ );
- if (!test_and_clear_bit(ASYNC_B_INITIALIZED, &self->flags))
+ if (!test_and_clear_bit(ASYNCB_INITIALIZED, &self->port.flags))
return;
ircomm_tty_detach_cable(self);
@@ -994,6 +965,7 @@ static void ircomm_tty_shutdown(struct ircomm_tty_cb *self)
static void ircomm_tty_hangup(struct tty_struct *tty)
{
struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
+ struct tty_port *port = &self->port;
unsigned long flags;
IRDA_DEBUG(0, "%s()\n", __func__ );
@@ -1004,14 +976,17 @@ static void ircomm_tty_hangup(struct tty_struct *tty)
/* ircomm_tty_flush_buffer(tty); */
ircomm_tty_shutdown(self);
- /* I guess we need to lock here - Jean II */
- spin_lock_irqsave(&self->spinlock, flags);
- self->flags &= ~ASYNC_NORMAL_ACTIVE;
- self->tty = NULL;
- self->open_count = 0;
- spin_unlock_irqrestore(&self->spinlock, flags);
+ spin_lock_irqsave(&port->lock, flags);
+ port->flags &= ~ASYNC_NORMAL_ACTIVE;
+ if (port->tty) {
+ set_bit(TTY_IO_ERROR, &port->tty->flags);
+ tty_kref_put(port->tty);
+ }
+ port->tty = NULL;
+ port->count = 0;
+ spin_unlock_irqrestore(&port->lock, flags);
- wake_up_interruptible(&self->open_wait);
+ wake_up_interruptible(&port->open_wait);
}
/*
@@ -1071,20 +1046,20 @@ void ircomm_tty_check_modem_status(struct ircomm_tty_cb *self)
IRDA_ASSERT(self != NULL, return;);
IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
- tty = self->tty;
+ tty = tty_port_tty_get(&self->port);
status = self->settings.dce;
if (status & IRCOMM_DCE_DELTA_ANY) {
/*wake_up_interruptible(&self->delta_msr_wait);*/
}
- if ((self->flags & ASYNC_CHECK_CD) && (status & IRCOMM_DELTA_CD)) {
+ if ((self->port.flags & ASYNC_CHECK_CD) && (status & IRCOMM_DELTA_CD)) {
IRDA_DEBUG(2,
"%s(), ircomm%d CD now %s...\n", __func__ , self->line,
(status & IRCOMM_CD) ? "on" : "off");
if (status & IRCOMM_CD) {
- wake_up_interruptible(&self->open_wait);
+ wake_up_interruptible(&self->port.open_wait);
} else {
IRDA_DEBUG(2,
"%s(), Doing serial hangup..\n", __func__ );
@@ -1092,10 +1067,10 @@ void ircomm_tty_check_modem_status(struct ircomm_tty_cb *self)
tty_hangup(tty);
/* Hangup will remote the tty, so better break out */
- return;
+ goto put;
}
}
- if (self->flags & ASYNC_CTS_FLOW) {
+ if (tty && tty_port_cts_enabled(&self->port)) {
if (tty->hw_stopped) {
if (status & IRCOMM_CTS) {
IRDA_DEBUG(2,
@@ -1103,10 +1078,10 @@ void ircomm_tty_check_modem_status(struct ircomm_tty_cb *self)
tty->hw_stopped = 0;
/* Wake up processes blocked on open */
- wake_up_interruptible(&self->open_wait);
+ wake_up_interruptible(&self->port.open_wait);
schedule_work(&self->tqueue);
- return;
+ goto put;
}
} else {
if (!(status & IRCOMM_CTS)) {
@@ -1116,6 +1091,8 @@ void ircomm_tty_check_modem_status(struct ircomm_tty_cb *self)
}
}
}
+put:
+ tty_kref_put(tty);
}
/*
@@ -1128,6 +1105,7 @@ static int ircomm_tty_data_indication(void *instance, void *sap,
struct sk_buff *skb)
{
struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+ struct tty_struct *tty;
IRDA_DEBUG(2, "%s()\n", __func__ );
@@ -1135,7 +1113,8 @@ static int ircomm_tty_data_indication(void *instance, void *sap,
IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
IRDA_ASSERT(skb != NULL, return -1;);
- if (!self->tty) {
+ tty = tty_port_tty_get(&self->port);
+ if (!tty) {
IRDA_DEBUG(0, "%s(), no tty!\n", __func__ );
return 0;
}
@@ -1146,7 +1125,7 @@ static int ircomm_tty_data_indication(void *instance, void *sap,
* Devices like WinCE can do this, and since they don't send any
* params, we can just as well declare the hardware for running.
*/
- if (self->tty->hw_stopped && (self->flow == FLOW_START)) {
+ if (tty->hw_stopped && (self->flow == FLOW_START)) {
IRDA_DEBUG(0, "%s(), polling for line settings!\n", __func__ );
ircomm_param_request(self, IRCOMM_POLL, TRUE);
@@ -1159,8 +1138,9 @@ static int ircomm_tty_data_indication(void *instance, void *sap,
* Use flip buffer functions since the code may be called from interrupt
* context
*/
- tty_insert_flip_string(self->tty, skb->data, skb->len);
- tty_flip_buffer_push(self->tty);
+ tty_insert_flip_string(tty, skb->data, skb->len);
+ tty_flip_buffer_push(tty);
+ tty_kref_put(tty);
/* No need to kfree_skb - see ircomm_ttp_data_indication() */
@@ -1211,12 +1191,13 @@ static void ircomm_tty_flow_indication(void *instance, void *sap,
IRDA_ASSERT(self != NULL, return;);
IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
- tty = self->tty;
+ tty = tty_port_tty_get(&self->port);
switch (cmd) {
case FLOW_START:
IRDA_DEBUG(2, "%s(), hw start!\n", __func__ );
- tty->hw_stopped = 0;
+ if (tty)
+ tty->hw_stopped = 0;
/* ircomm_tty_do_softint will take care of the rest */
schedule_work(&self->tqueue);
@@ -1224,15 +1205,19 @@ static void ircomm_tty_flow_indication(void *instance, void *sap,
default: /* If we get here, something is very wrong, better stop */
case FLOW_STOP:
IRDA_DEBUG(2, "%s(), hw stopped!\n", __func__ );
- tty->hw_stopped = 1;
+ if (tty)
+ tty->hw_stopped = 1;
break;
}
+
+ tty_kref_put(tty);
self->flow = cmd;
}
#ifdef CONFIG_PROC_FS
static void ircomm_tty_line_info(struct ircomm_tty_cb *self, struct seq_file *m)
{
+ struct tty_struct *tty;
char sep;
seq_printf(m, "State: %s\n", ircomm_tty_state[self->state]);
@@ -1328,40 +1313,43 @@ static void ircomm_tty_line_info(struct ircomm_tty_cb *self, struct seq_file *m)
seq_puts(m, "Flags:");
sep = ' ';
- if (self->flags & ASYNC_CTS_FLOW) {
+ if (tty_port_cts_enabled(&self->port)) {
seq_printf(m, "%cASYNC_CTS_FLOW", sep);
sep = '|';
}
- if (self->flags & ASYNC_CHECK_CD) {
+ if (self->port.flags & ASYNC_CHECK_CD) {
seq_printf(m, "%cASYNC_CHECK_CD", sep);
sep = '|';
}
- if (self->flags & ASYNC_INITIALIZED) {
+ if (self->port.flags & ASYNC_INITIALIZED) {
seq_printf(m, "%cASYNC_INITIALIZED", sep);
sep = '|';
}
- if (self->flags & ASYNC_LOW_LATENCY) {
+ if (self->port.flags & ASYNC_LOW_LATENCY) {
seq_printf(m, "%cASYNC_LOW_LATENCY", sep);
sep = '|';
}
- if (self->flags & ASYNC_CLOSING) {
+ if (self->port.flags & ASYNC_CLOSING) {
seq_printf(m, "%cASYNC_CLOSING", sep);
sep = '|';
}
- if (self->flags & ASYNC_NORMAL_ACTIVE) {
+ if (self->port.flags & ASYNC_NORMAL_ACTIVE) {
seq_printf(m, "%cASYNC_NORMAL_ACTIVE", sep);
sep = '|';
}
seq_putc(m, '\n');
seq_printf(m, "Role: %s\n", self->client ? "client" : "server");
- seq_printf(m, "Open count: %d\n", self->open_count);
+ seq_printf(m, "Open count: %d\n", self->port.count);
seq_printf(m, "Max data size: %d\n", self->max_data_size);
seq_printf(m, "Max header size: %d\n", self->max_header_size);
- if (self->tty)
+ tty = tty_port_tty_get(&self->port);
+ if (tty) {
seq_printf(m, "Hardware: %s\n",
- self->tty->hw_stopped ? "Stopped" : "Running");
+ tty->hw_stopped ? "Stopped" : "Running");
+ tty_kref_put(tty);
+ }
}
static int ircomm_tty_proc_show(struct seq_file *m, void *v)
diff --git a/net/irda/ircomm/ircomm_tty_attach.c b/net/irda/ircomm/ircomm_tty_attach.c
index b65d66e0d81..edab393e0c8 100644
--- a/net/irda/ircomm/ircomm_tty_attach.c
+++ b/net/irda/ircomm/ircomm_tty_attach.c
@@ -130,6 +130,8 @@ static int (*state[])(struct ircomm_tty_cb *self, IRCOMM_TTY_EVENT event,
*/
int ircomm_tty_attach_cable(struct ircomm_tty_cb *self)
{
+ struct tty_struct *tty;
+
IRDA_DEBUG(0, "%s()\n", __func__ );
IRDA_ASSERT(self != NULL, return -1;);
@@ -142,7 +144,11 @@ int ircomm_tty_attach_cable(struct ircomm_tty_cb *self)
}
/* Make sure nobody tries to write before the link is up */
- self->tty->hw_stopped = 1;
+ tty = tty_port_tty_get(&self->port);
+ if (tty) {
+ tty->hw_stopped = 1;
+ tty_kref_put(tty);
+ }
ircomm_tty_ias_register(self);
@@ -398,23 +404,26 @@ void ircomm_tty_disconnect_indication(void *instance, void *sap,
struct sk_buff *skb)
{
struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+ struct tty_struct *tty;
IRDA_DEBUG(2, "%s()\n", __func__ );
IRDA_ASSERT(self != NULL, return;);
IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
- if (!self->tty)
+ tty = tty_port_tty_get(&self->port);
+ if (!tty)
return;
/* This will stop control data transfers */
self->flow = FLOW_STOP;
/* Stop data transfers */
- self->tty->hw_stopped = 1;
+ tty->hw_stopped = 1;
ircomm_tty_do_event(self, IRCOMM_TTY_DISCONNECT_INDICATION, NULL,
NULL);
+ tty_kref_put(tty);
}
/*
@@ -550,12 +559,15 @@ void ircomm_tty_connect_indication(void *instance, void *sap,
*/
void ircomm_tty_link_established(struct ircomm_tty_cb *self)
{
+ struct tty_struct *tty;
+
IRDA_DEBUG(2, "%s()\n", __func__ );
IRDA_ASSERT(self != NULL, return;);
IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
- if (!self->tty)
+ tty = tty_port_tty_get(&self->port);
+ if (!tty)
return;
del_timer(&self->watchdog_timer);
@@ -566,19 +578,22 @@ void ircomm_tty_link_established(struct ircomm_tty_cb *self)
* will have to wait for the peer device (DCE) to raise the CTS
* line.
*/
- if ((self->flags & ASYNC_CTS_FLOW) && ((self->settings.dce & IRCOMM_CTS) == 0)) {
+ if (tty_port_cts_enabled(&self->port) &&
+ ((self->settings.dce & IRCOMM_CTS) == 0)) {
IRDA_DEBUG(0, "%s(), waiting for CTS ...\n", __func__ );
- return;
+ goto put;
} else {
IRDA_DEBUG(1, "%s(), starting hardware!\n", __func__ );
- self->tty->hw_stopped = 0;
+ tty->hw_stopped = 0;
/* Wake up processes blocked on open */
- wake_up_interruptible(&self->open_wait);
+ wake_up_interruptible(&self->port.open_wait);
}
schedule_work(&self->tqueue);
+put:
+ tty_kref_put(tty);
}
/*
@@ -977,14 +992,17 @@ static int ircomm_tty_state_ready(struct ircomm_tty_cb *self,
ircomm_tty_next_state(self, IRCOMM_TTY_SEARCH);
ircomm_tty_start_watchdog_timer(self, 3*HZ);
- if (self->flags & ASYNC_CHECK_CD) {
+ if (self->port.flags & ASYNC_CHECK_CD) {
/* Drop carrier */
self->settings.dce = IRCOMM_DELTA_CD;
ircomm_tty_check_modem_status(self);
} else {
+ struct tty_struct *tty = tty_port_tty_get(&self->port);
IRDA_DEBUG(0, "%s(), hanging up!\n", __func__ );
- if (self->tty)
- tty_hangup(self->tty);
+ if (tty) {
+ tty_hangup(tty);
+ tty_kref_put(tty);
+ }
}
break;
default:
diff --git a/net/irda/ircomm/ircomm_tty_ioctl.c b/net/irda/ircomm/ircomm_tty_ioctl.c
index d0667d68351..b343f50dc8d 100644
--- a/net/irda/ircomm/ircomm_tty_ioctl.c
+++ b/net/irda/ircomm/ircomm_tty_ioctl.c
@@ -52,17 +52,18 @@
* Change speed of the driver. If the remote device is a DCE, then this
* should make it change the speed of its serial port
*/
-static void ircomm_tty_change_speed(struct ircomm_tty_cb *self)
+static void ircomm_tty_change_speed(struct ircomm_tty_cb *self,
+ struct tty_struct *tty)
{
unsigned int cflag, cval;
int baud;
IRDA_DEBUG(2, "%s()\n", __func__ );
- if (!self->tty || !self->tty->termios || !self->ircomm)
+ if (!self->ircomm)
return;
- cflag = self->tty->termios->c_cflag;
+ cflag = tty->termios.c_cflag;
/* byte size and parity */
switch (cflag & CSIZE) {
@@ -81,7 +82,7 @@ static void ircomm_tty_change_speed(struct ircomm_tty_cb *self)
cval |= IRCOMM_PARITY_EVEN;
/* Determine divisor based on baud rate */
- baud = tty_get_baud_rate(self->tty);
+ baud = tty_get_baud_rate(tty);
if (!baud)
baud = 9600; /* B0 transition handled in rs_set_termios */
@@ -90,19 +91,19 @@ static void ircomm_tty_change_speed(struct ircomm_tty_cb *self)
/* CTS flow control flag and modem status interrupts */
if (cflag & CRTSCTS) {
- self->flags |= ASYNC_CTS_FLOW;
+ self->port.flags |= ASYNC_CTS_FLOW;
self->settings.flow_control |= IRCOMM_RTS_CTS_IN;
/* This got me. Bummer. Jean II */
if (self->service_type == IRCOMM_3_WIRE_RAW)
IRDA_WARNING("%s(), enabling RTS/CTS on link that doesn't support it (3-wire-raw)\n", __func__);
} else {
- self->flags &= ~ASYNC_CTS_FLOW;
+ self->port.flags &= ~ASYNC_CTS_FLOW;
self->settings.flow_control &= ~IRCOMM_RTS_CTS_IN;
}
if (cflag & CLOCAL)
- self->flags &= ~ASYNC_CHECK_CD;
+ self->port.flags &= ~ASYNC_CHECK_CD;
else
- self->flags |= ASYNC_CHECK_CD;
+ self->port.flags |= ASYNC_CHECK_CD;
#if 0
/*
* Set up parity check flag
@@ -148,18 +149,18 @@ void ircomm_tty_set_termios(struct tty_struct *tty,
struct ktermios *old_termios)
{
struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
- unsigned int cflag = tty->termios->c_cflag;
+ unsigned int cflag = tty->termios.c_cflag;
IRDA_DEBUG(2, "%s()\n", __func__ );
if ((cflag == old_termios->c_cflag) &&
- (RELEVANT_IFLAG(tty->termios->c_iflag) ==
+ (RELEVANT_IFLAG(tty->termios.c_iflag) ==
RELEVANT_IFLAG(old_termios->c_iflag)))
{
return;
}
- ircomm_tty_change_speed(self);
+ ircomm_tty_change_speed(self, tty);
/* Handle transition to B0 status */
if ((old_termios->c_cflag & CBAUD) &&
@@ -172,7 +173,7 @@ void ircomm_tty_set_termios(struct tty_struct *tty,
if (!(old_termios->c_cflag & CBAUD) &&
(cflag & CBAUD)) {
self->settings.dte |= IRCOMM_DTR;
- if (!(tty->termios->c_cflag & CRTSCTS) ||
+ if (!(tty->termios.c_cflag & CRTSCTS) ||
!test_bit(TTY_THROTTLED, &tty->flags)) {
self->settings.dte |= IRCOMM_RTS;
}
@@ -181,7 +182,7 @@ void ircomm_tty_set_termios(struct tty_struct *tty,
/* Handle turning off CRTSCTS */
if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios->c_cflag & CRTSCTS))
+ !(tty->termios.c_cflag & CRTSCTS))
{
tty->hw_stopped = 0;
ircomm_tty_start(tty);
@@ -270,10 +271,10 @@ static int ircomm_tty_get_serial_info(struct ircomm_tty_cb *self,
memset(&info, 0, sizeof(info));
info.line = self->line;
- info.flags = self->flags;
+ info.flags = self->port.flags;
info.baud_base = self->settings.data_rate;
- info.close_delay = self->close_delay;
- info.closing_wait = self->closing_wait;
+ info.close_delay = self->port.close_delay;
+ info.closing_wait = self->port.closing_wait;
/* For compatibility */
info.type = PORT_16550A;
diff --git a/net/l2tp/l2tp_core.c b/net/l2tp/l2tp_core.c
index 393355d37b4..513cab08a98 100644
--- a/net/l2tp/l2tp_core.c
+++ b/net/l2tp/l2tp_core.c
@@ -1347,11 +1347,10 @@ static void l2tp_tunnel_free(struct l2tp_tunnel *tunnel)
/* Remove from tunnel list */
spin_lock_bh(&pn->l2tp_tunnel_list_lock);
list_del_rcu(&tunnel->list);
+ kfree_rcu(tunnel, rcu);
spin_unlock_bh(&pn->l2tp_tunnel_list_lock);
- synchronize_rcu();
atomic_dec(&l2tp_tunnel_count);
- kfree(tunnel);
}
/* Create a socket for the tunnel, if one isn't set up by
diff --git a/net/l2tp/l2tp_core.h b/net/l2tp/l2tp_core.h
index a38ec6cdeee..56d583e083a 100644
--- a/net/l2tp/l2tp_core.h
+++ b/net/l2tp/l2tp_core.h
@@ -163,6 +163,7 @@ struct l2tp_tunnel_cfg {
struct l2tp_tunnel {
int magic; /* Should be L2TP_TUNNEL_MAGIC */
+ struct rcu_head rcu;
rwlock_t hlist_lock; /* protect session_hlist */
struct hlist_head session_hlist[L2TP_HASH_SIZE];
/* hashed list of sessions,
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index acf712ffb5e..c5e8c9c31f7 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1811,37 +1811,31 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb,
meshhdrlen = ieee80211_new_mesh_header(&mesh_hdr,
sdata, NULL, NULL);
} else {
- int is_mesh_mcast = 1;
- const u8 *mesh_da;
+ /* DS -> MBSS (802.11-2012 13.11.3.3).
+ * For unicast with unknown forwarding information,
+ * destination might be in the MBSS or if that fails
+ * forwarded to another mesh gate. In either case
+ * resolution will be handled in ieee80211_xmit(), so
+ * leave the original DA. This also works for mcast */
+ const u8 *mesh_da = skb->data;
+
+ if (mppath)
+ mesh_da = mppath->mpp;
+ else if (mpath)
+ mesh_da = mpath->dst;
+ rcu_read_unlock();
- if (is_multicast_ether_addr(skb->data))
- /* DA TA mSA AE:SA */
- mesh_da = skb->data;
- else {
- static const u8 bcast[ETH_ALEN] =
- { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
- if (mppath) {
- /* RA TA mDA mSA AE:DA SA */
- mesh_da = mppath->mpp;
- is_mesh_mcast = 0;
- } else if (mpath) {
- mesh_da = mpath->dst;
- is_mesh_mcast = 0;
- } else {
- /* DA TA mSA AE:SA */
- mesh_da = bcast;
- }
- }
hdrlen = ieee80211_fill_mesh_addresses(&hdr, &fc,
mesh_da, sdata->vif.addr);
- rcu_read_unlock();
- if (is_mesh_mcast)
+ if (is_multicast_ether_addr(mesh_da))
+ /* DA TA mSA AE:SA */
meshhdrlen =
ieee80211_new_mesh_header(&mesh_hdr,
sdata,
skb->data + ETH_ALEN,
NULL);
else
+ /* RA TA mDA mSA AE:DA SA */
meshhdrlen =
ieee80211_new_mesh_header(&mesh_hdr,
sdata,
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index 72bf32a8487..f51013c07b9 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -1171,8 +1171,10 @@ ip_vs_add_service(struct net *net, struct ip_vs_service_user_kern *u,
goto out_err;
}
svc->stats.cpustats = alloc_percpu(struct ip_vs_cpu_stats);
- if (!svc->stats.cpustats)
+ if (!svc->stats.cpustats) {
+ ret = -ENOMEM;
goto out_err;
+ }
/* I'm the first user of the service */
atomic_set(&svc->usecnt, 0);
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index cf4875565d6..2ceec64b19f 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -249,12 +249,15 @@ static void death_by_event(unsigned long ul_conntrack)
{
struct nf_conn *ct = (void *)ul_conntrack;
struct net *net = nf_ct_net(ct);
+ struct nf_conntrack_ecache *ecache = nf_ct_ecache_find(ct);
+
+ BUG_ON(ecache == NULL);
if (nf_conntrack_event(IPCT_DESTROY, ct) < 0) {
/* bad luck, let's retry again */
- ct->timeout.expires = jiffies +
+ ecache->timeout.expires = jiffies +
(random32() % net->ct.sysctl_events_retry_timeout);
- add_timer(&ct->timeout);
+ add_timer(&ecache->timeout);
return;
}
/* we've got the event delivered, now it's dying */
@@ -268,6 +271,9 @@ static void death_by_event(unsigned long ul_conntrack)
void nf_ct_insert_dying_list(struct nf_conn *ct)
{
struct net *net = nf_ct_net(ct);
+ struct nf_conntrack_ecache *ecache = nf_ct_ecache_find(ct);
+
+ BUG_ON(ecache == NULL);
/* add this conntrack to the dying list */
spin_lock_bh(&nf_conntrack_lock);
@@ -275,10 +281,10 @@ void nf_ct_insert_dying_list(struct nf_conn *ct)
&net->ct.dying);
spin_unlock_bh(&nf_conntrack_lock);
/* set a new timer to retry event delivery */
- setup_timer(&ct->timeout, death_by_event, (unsigned long)ct);
- ct->timeout.expires = jiffies +
+ setup_timer(&ecache->timeout, death_by_event, (unsigned long)ct);
+ ecache->timeout.expires = jiffies +
(random32() % net->ct.sysctl_events_retry_timeout);
- add_timer(&ct->timeout);
+ add_timer(&ecache->timeout);
}
EXPORT_SYMBOL_GPL(nf_ct_insert_dying_list);
diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index da4fc37a857..9807f3278fc 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -2790,7 +2790,8 @@ static int __init ctnetlink_init(void)
goto err_unreg_subsys;
}
- if (register_pernet_subsys(&ctnetlink_net_ops)) {
+ ret = register_pernet_subsys(&ctnetlink_net_ops);
+ if (ret < 0) {
pr_err("ctnetlink_init: cannot register pernet operations\n");
goto err_unreg_exp_subsys;
}
diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c
index 169ab59ed9d..14e2f390314 100644
--- a/net/netfilter/nfnetlink_log.c
+++ b/net/netfilter/nfnetlink_log.c
@@ -480,7 +480,7 @@ __build_packet_message(struct nfulnl_instance *inst,
}
if (indev && skb_mac_header_was_set(skb)) {
- if (nla_put_be32(inst->skb, NFULA_HWTYPE, htons(skb->dev->type)) ||
+ if (nla_put_be16(inst->skb, NFULA_HWTYPE, htons(skb->dev->type)) ||
nla_put_be16(inst->skb, NFULA_HWLEN,
htons(skb->dev->hard_header_len)) ||
nla_put(inst->skb, NFULA_HWHEADER, skb->dev->hard_header_len,
@@ -996,8 +996,10 @@ static int __init nfnetlink_log_init(void)
#ifdef CONFIG_PROC_FS
if (!proc_create("nfnetlink_log", 0440,
- proc_net_netfilter, &nful_file_ops))
+ proc_net_netfilter, &nful_file_ops)) {
+ status = -ENOMEM;
goto cleanup_logger;
+ }
#endif
return status;
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index 1445d73533e..527023823b5 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -1373,7 +1373,8 @@ static int netlink_sendmsg(struct kiocb *kiocb, struct socket *sock,
dst_pid = addr->nl_pid;
dst_group = ffs(addr->nl_groups);
err = -EPERM;
- if (dst_group && !netlink_capable(sock, NL_NONROOT_SEND))
+ if ((dst_group || dst_pid) &&
+ !netlink_capable(sock, NL_NONROOT_SEND))
goto out;
} else {
dst_pid = nlk->dst_pid;
@@ -2147,6 +2148,7 @@ static void __init netlink_add_usersock_entry(void)
rcu_assign_pointer(nl_table[NETLINK_USERSOCK].listeners, listeners);
nl_table[NETLINK_USERSOCK].module = THIS_MODULE;
nl_table[NETLINK_USERSOCK].registered = 1;
+ nl_table[NETLINK_USERSOCK].nl_nonroot = NL_NONROOT_SEND;
netlink_table_ungrab();
}
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index aee7196aac3..c5c9e2a5421 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -1273,7 +1273,7 @@ static void __fanout_unlink(struct sock *sk, struct packet_sock *po)
spin_unlock(&f->lock);
}
-bool match_fanout_group(struct packet_type *ptype, struct sock * sk)
+static bool match_fanout_group(struct packet_type *ptype, struct sock * sk)
{
if (ptype->af_packet_priv == (void*)((struct packet_sock *)sk)->fanout)
return true;
diff --git a/net/socket.c b/net/socket.c
index a5471f804d9..edc3c4af908 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -2604,7 +2604,7 @@ static int do_siocgstamp(struct net *net, struct socket *sock,
err = sock_do_ioctl(net, sock, cmd, (unsigned long)&ktv);
set_fs(old_fs);
if (!err)
- err = compat_put_timeval(up, &ktv);
+ err = compat_put_timeval(&ktv, up);
return err;
}
@@ -2620,7 +2620,7 @@ static int do_siocgstampns(struct net *net, struct socket *sock,
err = sock_do_ioctl(net, sock, cmd, (unsigned long)&kts);
set_fs(old_fs);
if (!err)
- err = compat_put_timespec(up, &kts);
+ err = compat_put_timespec(&kts, up);
return err;
}
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index 87cd0e4d428..210be48d8ae 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -1994,8 +1994,10 @@ int __xfrm_init_state(struct xfrm_state *x, bool init_replay)
goto error;
x->outer_mode = xfrm_get_mode(x->props.mode, family);
- if (x->outer_mode == NULL)
+ if (x->outer_mode == NULL) {
+ err = -EPROTONOSUPPORT;
goto error;
+ }
if (init_replay) {
err = xfrm_init_replay(x);
diff --git a/scripts/Makefile.fwinst b/scripts/Makefile.fwinst
index 6bf8e87f1dc..c3f69ae275d 100644
--- a/scripts/Makefile.fwinst
+++ b/scripts/Makefile.fwinst
@@ -42,7 +42,7 @@ quiet_cmd_install = INSTALL $(subst $(srctree)/,,$@)
$(installed-fw-dirs):
$(call cmd,mkdir)
-$(installed-fw): $(INSTALL_FW_PATH)/%: $(obj)/% | $(INSTALL_FW_PATH)/$$(dir %)
+$(installed-fw): $(INSTALL_FW_PATH)/%: $(obj)/% | $$(dir $(INSTALL_FW_PATH)/%)
$(call cmd,install)
PHONY += __fw_install __fw_modinst FORCE
diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index 4629038c9e5..4235a6361fe 100644
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -211,7 +211,7 @@ if [ -n "${CONFIG_KALLSYMS}" ]; then
if ! cmp -s System.map .tmp_System.map; then
echo >&2 Inconsistent kallsyms data
- echo >&2 echo Try "make KALLSYMS_EXTRA_PASS=1" as a workaround
+ echo >&2 Try "make KALLSYMS_EXTRA_PASS=1" as a workaround
cleanup
exit 1
fi
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index f560051a949..f25c24c743f 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -1209,6 +1209,9 @@ static void snd_hda_codec_free(struct hda_codec *codec)
kfree(codec);
}
+static bool snd_hda_codec_get_supported_ps(struct hda_codec *codec,
+ hda_nid_t fg, unsigned int power_state);
+
static void hda_set_power_state(struct hda_codec *codec, hda_nid_t fg,
unsigned int power_state);
@@ -1317,6 +1320,10 @@ int /*__devinit*/ snd_hda_codec_new(struct hda_bus *bus,
AC_VERB_GET_SUBSYSTEM_ID, 0);
}
+ codec->epss = snd_hda_codec_get_supported_ps(codec,
+ codec->afg ? codec->afg : codec->mfg,
+ AC_PWRST_EPSS);
+
/* power-up all before initialization */
hda_set_power_state(codec,
codec->afg ? codec->afg : codec->mfg,
@@ -3543,8 +3550,7 @@ static void hda_set_power_state(struct hda_codec *codec, hda_nid_t fg,
/* this delay seems necessary to avoid click noise at power-down */
if (power_state == AC_PWRST_D3) {
/* transition time less than 10ms for power down */
- bool epss = snd_hda_codec_get_supported_ps(codec, fg, AC_PWRST_EPSS);
- msleep(epss ? 10 : 100);
+ msleep(codec->epss ? 10 : 100);
}
/* repeat power states setting at most 10 times*/
diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
index 7fbc1bcaf1a..e5a7e19a807 100644
--- a/sound/pci/hda/hda_codec.h
+++ b/sound/pci/hda/hda_codec.h
@@ -862,6 +862,7 @@ struct hda_codec {
unsigned int ignore_misc_bit:1; /* ignore MISC_NO_PRESENCE bit */
unsigned int no_jack_detect:1; /* Machine has no jack-detection */
unsigned int pcm_format_first:1; /* PCM format must be set first */
+ unsigned int epss:1; /* supporting EPSS? */
#ifdef CONFIG_SND_HDA_POWER_SAVE
unsigned int power_on :1; /* current (global) power-state */
int power_transition; /* power-state in transition */
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index ea5775a1a7d..6f806d3e56b 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -4543,6 +4543,9 @@ static void stac92xx_line_out_detect(struct hda_codec *codec,
struct auto_pin_cfg *cfg = &spec->autocfg;
int i;
+ if (cfg->speaker_outs == 0)
+ return;
+
for (i = 0; i < cfg->line_outs; i++) {
if (presence)
break;
@@ -5531,6 +5534,7 @@ static int patch_stac92hd83xxx(struct hda_codec *codec)
snd_hda_codec_set_pincfg(codec, 0xf, 0x2181205e);
}
+ codec->epss = 0; /* longer delay needed for D3 */
codec->no_trigger_sense = 1;
codec->spec = spec;
diff --git a/sound/soc/omap/mcbsp.c b/sound/soc/omap/mcbsp.c
index d33c48baaf7..f18e4884732 100644
--- a/sound/soc/omap/mcbsp.c
+++ b/sound/soc/omap/mcbsp.c
@@ -27,6 +27,8 @@
#include <plat/mcbsp.h>
+#include <plat/cpu.h>
+
#include "mcbsp.h"
static void omap_mcbsp_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val)
diff --git a/sound/soc/omap/omap-abe-twl6040.c b/sound/soc/omap/omap-abe-twl6040.c
index 9d93793d307..45909ca889f 100644
--- a/sound/soc/omap/omap-abe-twl6040.c
+++ b/sound/soc/omap/omap-abe-twl6040.c
@@ -31,10 +31,6 @@
#include <sound/soc.h>
#include <sound/jack.h>
-#include <asm/mach-types.h>
-#include <plat/hardware.h>
-#include <plat/mux.h>
-
#include "omap-dmic.h"
#include "omap-mcpdm.h"
#include "omap-pcm.h"
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index acdd3ef14e0..d0ee71d6cc2 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -32,6 +32,7 @@
#include <sound/initval.h>
#include <sound/soc.h>
+#include <plat/cpu.h>
#include <plat/dma.h>
#include <plat/mcbsp.h>
#include "mcbsp.h"
diff --git a/sound/soc/omap/omap-mcpdm.c b/sound/soc/omap/omap-mcpdm.c
index 2c66e2498a4..ea053c3d2ab 100644
--- a/sound/soc/omap/omap-mcpdm.c
+++ b/sound/soc/omap/omap-mcpdm.c
@@ -45,6 +45,8 @@
#include "omap-mcpdm.h"
#include "omap-pcm.h"
+#define OMAP44XX_MCPDM_L3_BASE 0x49032000
+
struct omap_mcpdm {
struct device *dev;
unsigned long phys_base;
diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c
index f0feb06615f..b3099417988 100644
--- a/sound/soc/omap/omap-pcm.c
+++ b/sound/soc/omap/omap-pcm.c
@@ -30,6 +30,7 @@
#include <sound/pcm_params.h>
#include <sound/soc.h>
+#include <plat/cpu.h>
#include <plat/dma.h>
#include "omap-pcm.h"
diff --git a/sound/soc/omap/sdp3430.c b/sound/soc/omap/sdp3430.c
index 0e283226e2b..78e14198aa1 100644
--- a/sound/soc/omap/sdp3430.c
+++ b/sound/soc/omap/sdp3430.c
@@ -34,6 +34,7 @@
#include <mach/hardware.h>
#include <mach/gpio.h>
#include <plat/mcbsp.h>
+#include <linux/platform_data/gpio-omap.h>
/* Register descriptions for twl4030 codec part */
#include <linux/mfd/twl4030-audio.h>
diff --git a/sound/usb/card.c b/sound/usb/card.c
index d5b5c3388e2..4a469f0cb6d 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -553,7 +553,7 @@ static void snd_usb_audio_disconnect(struct usb_device *dev,
struct snd_usb_audio *chip)
{
struct snd_card *card;
- struct list_head *p;
+ struct list_head *p, *n;
if (chip == (void *)-1L)
return;
@@ -570,7 +570,7 @@ static void snd_usb_audio_disconnect(struct usb_device *dev,
snd_usb_stream_disconnect(p);
}
/* release the endpoint resources */
- list_for_each(p, &chip->ep_list) {
+ list_for_each_safe(p, n, &chip->ep_list) {
snd_usb_endpoint_free(p);
}
/* release the midi resources */
diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c
index c4118120268..d6e2bb49c59 100644
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -141,7 +141,7 @@ int snd_usb_endpoint_implict_feedback_sink(struct snd_usb_endpoint *ep)
*
* For implicit feedback, next_packet_size() is unused.
*/
-static int next_packet_size(struct snd_usb_endpoint *ep)
+int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep)
{
unsigned long flags;
int ret;
@@ -177,15 +177,6 @@ static void retire_inbound_urb(struct snd_usb_endpoint *ep,
ep->retire_data_urb(ep->data_subs, urb);
}
-static void prepare_outbound_urb_sizes(struct snd_usb_endpoint *ep,
- struct snd_urb_ctx *ctx)
-{
- int i;
-
- for (i = 0; i < ctx->packets; ++i)
- ctx->packet_size[i] = next_packet_size(ep);
-}
-
/*
* Prepare a PLAYBACK urb for submission to the bus.
*/
@@ -370,7 +361,6 @@ static void snd_complete_urb(struct urb *urb)
goto exit_clear;
}
- prepare_outbound_urb_sizes(ep, ctx);
prepare_outbound_urb(ep, ctx);
} else {
retire_inbound_urb(ep, ctx);
@@ -799,7 +789,9 @@ int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep,
/**
* snd_usb_endpoint_start: start an snd_usb_endpoint
*
- * @ep: the endpoint to start
+ * @ep: the endpoint to start
+ * @can_sleep: flag indicating whether the operation is executed in
+ * non-atomic context
*
* A call to this function will increment the use count of the endpoint.
* In case it is not already running, the URBs for this endpoint will be
@@ -809,7 +801,7 @@ int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep,
*
* Returns an error if the URB submission failed, 0 in all other cases.
*/
-int snd_usb_endpoint_start(struct snd_usb_endpoint *ep)
+int snd_usb_endpoint_start(struct snd_usb_endpoint *ep, int can_sleep)
{
int err;
unsigned int i;
@@ -821,6 +813,11 @@ int snd_usb_endpoint_start(struct snd_usb_endpoint *ep)
if (++ep->use_count != 1)
return 0;
+ /* just to be sure */
+ deactivate_urbs(ep, 0, can_sleep);
+ if (can_sleep)
+ wait_clear_urbs(ep);
+
ep->active_mask = 0;
ep->unlink_mask = 0;
ep->phase = 0;
@@ -850,7 +847,6 @@ int snd_usb_endpoint_start(struct snd_usb_endpoint *ep)
goto __error;
if (usb_pipeout(ep->pipe)) {
- prepare_outbound_urb_sizes(ep, urb->context);
prepare_outbound_urb(ep, urb->context);
} else {
prepare_inbound_urb(ep, urb->context);
diff --git a/sound/usb/endpoint.h b/sound/usb/endpoint.h
index ee2723fb174..cbbbdf226d6 100644
--- a/sound/usb/endpoint.h
+++ b/sound/usb/endpoint.h
@@ -13,7 +13,7 @@ int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep,
struct audioformat *fmt,
struct snd_usb_endpoint *sync_ep);
-int snd_usb_endpoint_start(struct snd_usb_endpoint *ep);
+int snd_usb_endpoint_start(struct snd_usb_endpoint *ep, int can_sleep);
void snd_usb_endpoint_stop(struct snd_usb_endpoint *ep,
int force, int can_sleep, int wait);
int snd_usb_endpoint_activate(struct snd_usb_endpoint *ep);
@@ -21,6 +21,7 @@ int snd_usb_endpoint_deactivate(struct snd_usb_endpoint *ep);
void snd_usb_endpoint_free(struct list_head *head);
int snd_usb_endpoint_implict_feedback_sink(struct snd_usb_endpoint *ep);
+int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep);
void snd_usb_handle_sync_urb(struct snd_usb_endpoint *ep,
struct snd_usb_endpoint *sender,
diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index 62ec808ed79..fd5e982fc98 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -212,7 +212,7 @@ int snd_usb_init_pitch(struct snd_usb_audio *chip, int iface,
}
}
-static int start_endpoints(struct snd_usb_substream *subs)
+static int start_endpoints(struct snd_usb_substream *subs, int can_sleep)
{
int err;
@@ -225,7 +225,7 @@ static int start_endpoints(struct snd_usb_substream *subs)
snd_printdd(KERN_DEBUG "Starting data EP @%p\n", ep);
ep->data_subs = subs;
- err = snd_usb_endpoint_start(ep);
+ err = snd_usb_endpoint_start(ep, can_sleep);
if (err < 0) {
clear_bit(SUBSTREAM_FLAG_DATA_EP_STARTED, &subs->flags);
return err;
@@ -236,10 +236,25 @@ static int start_endpoints(struct snd_usb_substream *subs)
!test_and_set_bit(SUBSTREAM_FLAG_SYNC_EP_STARTED, &subs->flags)) {
struct snd_usb_endpoint *ep = subs->sync_endpoint;
+ if (subs->data_endpoint->iface != subs->sync_endpoint->iface ||
+ subs->data_endpoint->alt_idx != subs->sync_endpoint->alt_idx) {
+ err = usb_set_interface(subs->dev,
+ subs->sync_endpoint->iface,
+ subs->sync_endpoint->alt_idx);
+ if (err < 0) {
+ snd_printk(KERN_ERR
+ "%d:%d:%d: cannot set interface (%d)\n",
+ subs->dev->devnum,
+ subs->sync_endpoint->iface,
+ subs->sync_endpoint->alt_idx, err);
+ return -EIO;
+ }
+ }
+
snd_printdd(KERN_DEBUG "Starting sync EP @%p\n", ep);
ep->sync_slave = subs->data_endpoint;
- err = snd_usb_endpoint_start(ep);
+ err = snd_usb_endpoint_start(ep, can_sleep);
if (err < 0) {
clear_bit(SUBSTREAM_FLAG_SYNC_EP_STARTED, &subs->flags);
return err;
@@ -544,13 +559,10 @@ static int snd_usb_pcm_prepare(struct snd_pcm_substream *substream)
subs->last_frame_number = 0;
runtime->delay = 0;
- /* clear the pending deactivation on the target EPs */
- deactivate_endpoints(subs);
-
/* for playback, submit the URBs now; otherwise, the first hwptr_done
* updates for all URBs would happen at the same time when starting */
if (subs->direction == SNDRV_PCM_STREAM_PLAYBACK)
- return start_endpoints(subs);
+ return start_endpoints(subs, 1);
return 0;
}
@@ -1032,6 +1044,7 @@ static void prepare_playback_urb(struct snd_usb_substream *subs,
struct urb *urb)
{
struct snd_pcm_runtime *runtime = subs->pcm_substream->runtime;
+ struct snd_usb_endpoint *ep = subs->data_endpoint;
struct snd_urb_ctx *ctx = urb->context;
unsigned int counts, frames, bytes;
int i, stride, period_elapsed = 0;
@@ -1043,7 +1056,11 @@ static void prepare_playback_urb(struct snd_usb_substream *subs,
urb->number_of_packets = 0;
spin_lock_irqsave(&subs->lock, flags);
for (i = 0; i < ctx->packets; i++) {
- counts = ctx->packet_size[i];
+ if (ctx->packet_size[i])
+ counts = ctx->packet_size[i];
+ else
+ counts = snd_usb_endpoint_next_packet_size(ep);
+
/* set up descriptor */
urb->iso_frame_desc[i].offset = frames * stride;
urb->iso_frame_desc[i].length = counts * stride;
@@ -1094,7 +1111,16 @@ static void prepare_playback_urb(struct snd_usb_substream *subs,
subs->hwptr_done += bytes;
if (subs->hwptr_done >= runtime->buffer_size * stride)
subs->hwptr_done -= runtime->buffer_size * stride;
+
+ /* update delay with exact number of samples queued */
+ runtime->delay = subs->last_delay;
runtime->delay += frames;
+ subs->last_delay = runtime->delay;
+
+ /* realign last_frame_number */
+ subs->last_frame_number = usb_get_current_frame_number(subs->dev);
+ subs->last_frame_number &= 0xFF; /* keep 8 LSBs */
+
spin_unlock_irqrestore(&subs->lock, flags);
urb->transfer_buffer_length = bytes;
if (period_elapsed)
@@ -1112,12 +1138,26 @@ static void retire_playback_urb(struct snd_usb_substream *subs,
struct snd_pcm_runtime *runtime = subs->pcm_substream->runtime;
int stride = runtime->frame_bits >> 3;
int processed = urb->transfer_buffer_length / stride;
+ int est_delay;
spin_lock_irqsave(&subs->lock, flags);
- if (processed > runtime->delay)
- runtime->delay = 0;
+ est_delay = snd_usb_pcm_delay(subs, runtime->rate);
+ /* update delay with exact number of samples played */
+ if (processed > subs->last_delay)
+ subs->last_delay = 0;
else
- runtime->delay -= processed;
+ subs->last_delay -= processed;
+ runtime->delay = subs->last_delay;
+
+ /*
+ * Report when delay estimate is off by more than 2ms.
+ * The error should be lower than 2ms since the estimate relies
+ * on two reads of a counter updated every ms.
+ */
+ if (abs(est_delay - subs->last_delay) * 1000 > runtime->rate * 2)
+ snd_printk(KERN_DEBUG "delay: estimated %d, actual %d\n",
+ est_delay, subs->last_delay);
+
spin_unlock_irqrestore(&subs->lock, flags);
}
@@ -1175,7 +1215,7 @@ static int snd_usb_substream_capture_trigger(struct snd_pcm_substream *substream
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
- err = start_endpoints(subs);
+ err = start_endpoints(subs, 0);
if (err < 0)
return err;