diff options
| -rw-r--r-- | drivers/usb/serial/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/usb/serial/Makefile | 1 | ||||
| -rw-r--r-- | drivers/usb/serial/airprime.c | 63 |
3 files changed, 73 insertions, 0 deletions
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 0c4aa00bb39..bc798edf035 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -53,6 +53,15 @@ config USB_SERIAL_GENERIC support" be compiled as a module for this driver to be used properly. +config USB_SERIAL_AIRPRIME + tristate "USB AirPrime CDMA Wireless Driver" + depends on USB_SERIAL + help + Say Y here if you want to use a AirPrime CDMA Wireless PC card. + + To compile this driver as a module, choose M here: the + module will be called airprime. + config USB_SERIAL_BELKIN tristate "USB Belkin and Peracom Single Port Serial Driver" depends on USB_SERIAL diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index b0aac47d195..d56ff6d86cc 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -11,6 +11,7 @@ usbserial-obj-$(CONFIG_USB_EZUSB) += ezusb.o usbserial-objs := usb-serial.o generic.o bus.o $(usbserial-obj-y) +obj-$(CONFIG_USB_SERIAL_AIRPRIME) += airprime.o obj-$(CONFIG_USB_SERIAL_BELKIN) += belkin_sa.o obj-$(CONFIG_USB_SERIAL_CP2101) += cp2101.o obj-$(CONFIG_USB_SERIAL_CYBERJACK) += cyberjack.o diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c new file mode 100644 index 00000000000..a4ce0008d69 --- /dev/null +++ b/drivers/usb/serial/airprime.c @@ -0,0 +1,63 @@ +/* + * AirPrime CDMA Wireless Serial USB driver + * + * Copyright (C) 2005 Greg Kroah-Hartman <gregkh@suse.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/tty.h> +#include <linux/module.h> +#include <linux/usb.h> +#include "usb-serial.h" + +static struct usb_device_id id_table [] = { + { USB_DEVICE(0xf3d, 0x0112) }, + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +static struct usb_driver airprime_driver = { + .owner = THIS_MODULE, + .name = "airprime", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = id_table, +}; + +static struct usb_serial_device_type airprime_device = { + .owner = THIS_MODULE, + .name = "airprime", + .id_table = id_table, + .num_interrupt_in = NUM_DONT_CARE, + .num_bulk_in = NUM_DONT_CARE, + .num_bulk_out = NUM_DONT_CARE, + .num_ports = 1, +}; + +static int __init airprime_init(void) +{ + int retval; + + retval = usb_serial_register(&airprime_device); + if (retval) + return retval; + retval = usb_register(&airprime_driver); + if (retval) + usb_serial_deregister(&airprime_device); + return retval; +} + +static void __exit airprime_exit(void) +{ + usb_deregister(&airprime_driver); + usb_serial_deregister(&airprime_device); +} + +module_init(airprime_init); +module_exit(airprime_exit); +MODULE_LICENSE("GPL"); |