summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/SubmittingPatches2
-rw-r--r--Documentation/fb/cmap_xfbdev.txt53
-rw-r--r--Documentation/fb/metronomefb.txt38
-rw-r--r--Documentation/feature-removal-schedule.txt10
-rw-r--r--Documentation/hw_random.txt59
-rw-r--r--Documentation/i386/IO-APIC.txt2
-rw-r--r--Documentation/ide/ide.txt21
-rw-r--r--Documentation/input/notifier.txt52
-rw-r--r--Documentation/kernel-parameters.txt11
-rw-r--r--Documentation/lguest/lguest.c70
-rw-r--r--Documentation/lguest/lguest.txt19
-rw-r--r--Documentation/mca.txt17
-rw-r--r--Documentation/nmi_watchdog.txt3
-rw-r--r--Documentation/unaligned-memory-access.txt4
-rw-r--r--MAINTAINERS18
-rw-r--r--Makefile4
-rw-r--r--arch/alpha/kernel/pci_iommu.c8
-rw-r--r--arch/arm/Kconfig1
-rw-r--r--arch/arm/common/it8152.c5
-rw-r--r--arch/arm/kernel/calls.S2
-rw-r--r--arch/arm/kernel/signal.c4
-rw-r--r--arch/arm/kernel/sys_oabi-compat.c24
-rw-r--r--arch/arm/mach-iop32x/glantank.c12
-rw-r--r--arch/arm/mach-omap1/time.c12
-rw-r--r--arch/arm/mm/proc-xscale.S4
-rw-r--r--arch/arm/plat-omap/Kconfig1
-rw-r--r--arch/arm/plat-omap/Makefile5
-rw-r--r--arch/arm/plat-omap/dma.c9
-rw-r--r--arch/arm/plat-omap/gpio.c3
-rw-r--r--arch/avr32/kernel/setup.c1
-rw-r--r--arch/avr32/kernel/traps.c4
-rw-r--r--arch/mips/Makefile7
-rw-r--r--arch/mips/au1000/common/cputable.c36
-rw-r--r--arch/mips/au1000/common/setup.c13
-rw-r--r--arch/mips/au1000/common/time.c24
-rw-r--r--arch/mips/au1000/xxs1500/board_setup.c3
-rw-r--r--arch/mips/au1000/xxs1500/irqmap.c2
-rw-r--r--arch/mips/configs/bigsur_defconfig939
-rw-r--r--arch/mips/kernel/i8253.c1
-rw-r--r--arch/mips/kernel/time.c2
-rw-r--r--arch/mips/kernel/vpe.c21
-rw-r--r--arch/mips/mm/tlbex.c1
-rw-r--r--arch/mips/pci/pci-bcm1480.c6
-rw-r--r--arch/mips/pci/pci-bcm1480ht.c21
-rw-r--r--arch/powerpc/boot/Makefile4
-rw-r--r--arch/powerpc/boot/dts/lite5200b.dts2
-rwxr-xr-xarch/powerpc/boot/wrapper4
-rw-r--r--arch/powerpc/configs/cell_defconfig141
-rw-r--r--arch/powerpc/configs/celleb_defconfig117
-rw-r--r--arch/powerpc/configs/chrp32_defconfig165
-rw-r--r--arch/powerpc/configs/ep8248e_defconfig74
-rw-r--r--arch/powerpc/configs/ep88xc_defconfig56
-rw-r--r--arch/powerpc/configs/g5_defconfig137
-rw-r--r--arch/powerpc/configs/iseries_defconfig99
-rw-r--r--arch/powerpc/configs/linkstation_defconfig131
-rw-r--r--arch/powerpc/configs/mpc7448_hpc2_defconfig119
-rw-r--r--arch/powerpc/configs/mpc8272_ads_defconfig75
-rw-r--r--arch/powerpc/configs/mpc8313_rdb_defconfig114
-rw-r--r--arch/powerpc/configs/mpc8315_rdb_defconfig110
-rw-r--r--arch/powerpc/configs/mpc832x_mds_defconfig101
-rw-r--r--arch/powerpc/configs/mpc832x_rdb_defconfig106
-rw-r--r--arch/powerpc/configs/mpc834x_itx_defconfig111
-rw-r--r--arch/powerpc/configs/mpc834x_itxgp_defconfig109
-rw-r--r--arch/powerpc/configs/mpc834x_mds_defconfig104
-rw-r--r--arch/powerpc/configs/mpc836x_mds_defconfig102
-rw-r--r--arch/powerpc/configs/mpc837x_mds_defconfig197
-rw-r--r--arch/powerpc/configs/mpc837x_rdb_defconfig83
-rw-r--r--arch/powerpc/configs/mpc83xx_defconfig88
-rw-r--r--arch/powerpc/configs/mpc8540_ads_defconfig121
-rw-r--r--arch/powerpc/configs/mpc8544_ds_defconfig127
-rw-r--r--arch/powerpc/configs/mpc8560_ads_defconfig126
-rw-r--r--arch/powerpc/configs/mpc8568mds_defconfig106
-rw-r--r--arch/powerpc/configs/mpc8572_ds_defconfig127
-rw-r--r--arch/powerpc/configs/mpc85xx_cds_defconfig131
-rw-r--r--arch/powerpc/configs/mpc85xx_defconfig111
-rw-r--r--arch/powerpc/configs/mpc8610_hpcd_defconfig131
-rw-r--r--arch/powerpc/configs/mpc8641_hpcn_defconfig115
-rw-r--r--arch/powerpc/configs/mpc866_ads_defconfig112
-rw-r--r--arch/powerpc/configs/mpc885_ads_defconfig56
-rw-r--r--arch/powerpc/configs/pasemi_defconfig142
-rw-r--r--arch/powerpc/configs/pmac32_defconfig195
-rw-r--r--arch/powerpc/configs/ppc64_defconfig169
-rw-r--r--arch/powerpc/configs/pq2fads_defconfig89
-rw-r--r--arch/powerpc/configs/prpmc2800_defconfig160
-rw-r--r--arch/powerpc/configs/ps3_defconfig103
-rw-r--r--arch/powerpc/configs/pseries_defconfig136
-rw-r--r--arch/powerpc/configs/sbc834x_defconfig78
-rw-r--r--arch/powerpc/configs/sbc8548_defconfig115
-rw-r--r--arch/powerpc/configs/sbc8560_defconfig124
-rw-r--r--arch/powerpc/configs/storcenter_defconfig102
-rw-r--r--arch/powerpc/configs/stx_gp3_defconfig154
-rw-r--r--arch/powerpc/configs/tqm8540_defconfig133
-rw-r--r--arch/powerpc/configs/tqm8541_defconfig133
-rw-r--r--arch/powerpc/configs/tqm8555_defconfig133
-rw-r--r--arch/powerpc/configs/tqm8560_defconfig133
-rw-r--r--arch/powerpc/kernel/process.c16
-rw-r--r--arch/powerpc/kernel/ptrace.c10
-rw-r--r--arch/powerpc/mm/hash_utils_64.c11
-rw-r--r--arch/powerpc/mm/slb.c6
-rw-r--r--arch/powerpc/oprofile/cell/vma_map.c37
-rw-r--r--arch/powerpc/platforms/cell/iommu.c41
-rw-r--r--arch/powerpc/platforms/cell/setup.c36
-rw-r--r--arch/powerpc/platforms/pseries/xics.c2
-rw-r--r--arch/powerpc/sysdev/bestcomm/bestcomm.c8
-rw-r--r--arch/powerpc/sysdev/ipic.c2
-rw-r--r--arch/s390/lib/uaccess_pt.c2
-rw-r--r--arch/sh/Kconfig4
-rw-r--r--arch/sh/Makefile8
-rw-r--r--arch/sh/boot/Makefile6
-rw-r--r--arch/sh/kernel/cpu/sh2/entry.S1
-rw-r--r--arch/sh/kernel/cpu/sh2a/fpu.c1
-rw-r--r--arch/sh/kernel/cpu/sh4/fpu.c1
-rw-r--r--arch/sh/kernel/cpu/sh5/fpu.c1
-rw-r--r--arch/sh/kernel/dump_task.c1
-rw-r--r--arch/sh/kernel/process_32.c1
-rw-r--r--arch/sh/kernel/signal_32.c1
-rw-r--r--arch/sh/kernel/smp.c2
-rw-r--r--arch/sparc64/defconfig12
-rw-r--r--arch/sparc64/kernel/cpu.c10
-rw-r--r--arch/sparc64/kernel/ds.c3
-rw-r--r--arch/sparc64/kernel/entry.S30
-rw-r--r--arch/sparc64/kernel/entry.h196
-rw-r--r--arch/sparc64/kernel/head.S8
-rw-r--r--arch/sparc64/kernel/iommu.c20
-rw-r--r--arch/sparc64/kernel/iommu_common.h18
-rw-r--r--arch/sparc64/kernel/irq.c21
-rw-r--r--arch/sparc64/kernel/pci_sun4v.c12
-rw-r--r--arch/sparc64/kernel/process.c3
-rw-r--r--arch/sparc64/kernel/ptrace.c20
-rw-r--r--arch/sparc64/kernel/setup.c5
-rw-r--r--arch/sparc64/kernel/signal.c3
-rw-r--r--arch/sparc64/kernel/smp.c20
-rw-r--r--arch/sparc64/kernel/stacktrace.c4
-rw-r--r--arch/sparc64/kernel/sys_sparc.c14
-rw-r--r--arch/sparc64/kernel/sys_sparc32.c3
-rw-r--r--arch/sparc64/kernel/systbls.h53
-rw-r--r--arch/sparc64/kernel/time.c66
-rw-r--r--arch/sparc64/kernel/trampoline.S188
-rw-r--r--arch/sparc64/kernel/traps.c49
-rw-r--r--arch/sparc64/mm/init.c43
-rw-r--r--arch/sparc64/mm/tlb.c6
-rw-r--r--arch/x86/kernel/aperture_64.c3
-rw-r--r--arch/x86/kernel/cpu/cpufreq/speedstep-smi.c39
-rw-r--r--arch/x86/kernel/cpu/mtrr/generic.c42
-rw-r--r--arch/x86/kernel/cpu/mtrr/main.c3
-rw-r--r--arch/x86/kernel/e820_32.c26
-rw-r--r--arch/x86/kernel/e820_64.c27
-rw-r--r--arch/x86/kernel/head_32.S2
-rw-r--r--arch/x86/kernel/io_delay.c8
-rw-r--r--arch/x86/kernel/machine_kexec_64.c1
-rw-r--r--arch/x86/kernel/mfgpt_32.c1
-rw-r--r--arch/x86/kernel/pci-dma_64.c5
-rw-r--r--arch/x86/kernel/ptrace.c169
-rw-r--r--arch/x86/kernel/quirks.c2
-rw-r--r--arch/x86/kernel/reboot.c18
-rw-r--r--arch/x86/kernel/setup64.c14
-rw-r--r--arch/x86/kernel/setup_32.c9
-rw-r--r--arch/x86/kernel/setup_64.c2
-rw-r--r--arch/x86/kvm/mmu.c18
-rw-r--r--arch/x86/kvm/vmx.c7
-rw-r--r--arch/x86/lguest/boot.c108
-rw-r--r--arch/x86/lguest/i386_head.S15
-rw-r--r--arch/x86/mach-rdc321x/gpio.c199
-rw-r--r--arch/x86/mach-rdc321x/platform.c2
-rw-r--r--arch/x86/mach-visws/traps.c5
-rw-r--r--arch/x86/mm/discontig_32.c1
-rw-r--r--arch/x86/mm/fault.c10
-rw-r--r--arch/x86/mm/highmem_32.c6
-rw-r--r--arch/x86/mm/hugetlbpage.c2
-rw-r--r--arch/x86/mm/ioremap.c12
-rw-r--r--arch/x86/mm/numa_64.c3
-rw-r--r--arch/x86/mm/pageattr.c2
-rw-r--r--arch/x86/xen/enlighten.c47
-rw-r--r--arch/x86/xen/xen-asm.S9
-rw-r--r--block/blk-settings.c2
-rw-r--r--block/cfq-iosched.c57
-rw-r--r--crypto/async_tx/async_xor.c2
-rw-r--r--crypto/xcbc.c17
-rw-r--r--drivers/acpi/asus_acpi.c2
-rw-r--r--drivers/acpi/battery.c11
-rw-r--r--drivers/acpi/dock.c1
-rw-r--r--drivers/acpi/ec.c11
-rw-r--r--drivers/acpi/pci_irq.c4
-rw-r--r--drivers/acpi/processor_idle.c19
-rw-r--r--drivers/acpi/sbshc.c1
-rw-r--r--drivers/acpi/scan.c18
-rw-r--r--drivers/acpi/sleep/main.c71
-rw-r--r--drivers/acpi/video.c60
-rw-r--r--drivers/ata/Kconfig1
-rw-r--r--drivers/ata/ahci.c6
-rw-r--r--drivers/ata/libata-core.c48
-rw-r--r--drivers/ata/libata-eh.c2
-rw-r--r--drivers/ata/libata-scsi.c14
-rw-r--r--drivers/ata/pata_it821x.c2
-rw-r--r--drivers/ata/pata_sil680.c6
-rw-r--r--drivers/ata/sata_promise.c109
-rw-r--r--drivers/base/core.c5
-rw-r--r--drivers/base/driver.c5
-rw-r--r--drivers/block/Kconfig10
-rw-r--r--drivers/block/Makefile1
-rw-r--r--drivers/block/nbd.c6
-rw-r--r--drivers/block/ps2esdi.c1079
-rw-r--r--drivers/char/drm/ati_pcigart.c102
-rw-r--r--drivers/char/drm/drmP.h3
-rw-r--r--drivers/char/drm/drm_fops.c7
-rw-r--r--drivers/char/drm/drm_lock.c35
-rw-r--r--drivers/char/drm/drm_pciids.h7
-rw-r--r--drivers/char/drm/drm_scatter.c11
-rw-r--r--drivers/char/drm/drm_vm.c20
-rw-r--r--drivers/char/drm/i915_dma.c3
-rw-r--r--drivers/char/drm/r128_cce.c1
-rw-r--r--drivers/char/drm/r300_cmdbuf.c54
-rw-r--r--drivers/char/drm/radeon_cp.c1
-rw-r--r--drivers/char/drm/radeon_drm.h12
-rw-r--r--drivers/char/drm/radeon_mem.c8
-rw-r--r--drivers/char/drm/via_dma.c59
-rw-r--r--drivers/char/drm/via_dmablit.c2
-rw-r--r--drivers/char/hw_random/Kconfig9
-rw-r--r--drivers/char/ip2/i2lib.c12
-rw-r--r--drivers/char/n_tty.c2
-rw-r--r--drivers/char/nozomi.c20
-rw-r--r--drivers/char/rio/riotable.c4
-rw-r--r--drivers/char/rio/riotty.c4
-rw-r--r--drivers/char/rocket.c37
-rw-r--r--drivers/char/rocket_int.h83
-rw-r--r--drivers/cpuidle/cpuidle.c4
-rw-r--r--drivers/cpuidle/sysfs.c10
-rw-r--r--drivers/crypto/hifn_795x.c28
-rw-r--r--drivers/dma/fsldma.c30
-rw-r--r--drivers/dma/fsldma.h48
-rw-r--r--drivers/dma/ioat_dca.c4
-rw-r--r--drivers/firewire/fw-ohci.c9
-rw-r--r--drivers/firewire/fw-transaction.c6
-rw-r--r--drivers/hid/hid-core.c2
-rw-r--r--drivers/hid/hid-input.c22
-rw-r--r--drivers/hid/usbhid/hid-core.c2
-rw-r--r--drivers/hid/usbhid/hid-quirks.c6
-rw-r--r--drivers/hwmon/Kconfig5
-rw-r--r--drivers/hwmon/ibmpex.c13
-rw-r--r--drivers/hwmon/w83781d.c21
-rw-r--r--drivers/i2c/busses/Kconfig2
-rw-r--r--drivers/i2c/busses/i2c-omap.c36
-rw-r--r--drivers/i2c/i2c-core.c4
-rw-r--r--drivers/ide/arm/ide_arm.c2
-rw-r--r--drivers/ide/cris/ide-cris.c2
-rw-r--r--drivers/ide/h8300/ide-h8300.c3
-rw-r--r--drivers/ide/ide-iops.c3
-rw-r--r--drivers/ide/ide-lib.c10
-rw-r--r--drivers/ide/ide-pnp.c2
-rw-r--r--drivers/ide/ide-probe.c5
-rw-r--r--drivers/ide/ide-tape.c5
-rw-r--r--drivers/ide/ide-taskfile.c36
-rw-r--r--drivers/ide/ide.c20
-rw-r--r--drivers/ide/legacy/buddha.c2
-rw-r--r--drivers/ide/legacy/falconide.c2
-rw-r--r--drivers/ide/legacy/gayle.c2
-rw-r--r--drivers/ide/legacy/macide.c2
-rw-r--r--drivers/ide/legacy/q40ide.c2
-rw-r--r--drivers/ide/pci/cmd640.c2
-rw-r--r--drivers/ide/ppc/mpc8xx.c2
-rw-r--r--drivers/ide/ppc/pmac.c2
-rw-r--r--drivers/infiniband/core/addr.c8
-rw-r--r--drivers/infiniband/core/cm.c2
-rw-r--r--drivers/infiniband/core/cma.c24
-rw-r--r--drivers/infiniband/hw/cxgb3/iwch_cm.c2
-rw-r--r--drivers/infiniband/hw/nes/nes_cm.c3
-rw-r--r--drivers/input/apm-power.c7
-rw-r--r--drivers/input/evdev.c3
-rw-r--r--drivers/input/joydev.c3
-rw-r--r--drivers/input/keyboard/pxa27x_keypad.c6
-rw-r--r--drivers/input/misc/cobalt_btns.c16
-rw-r--r--drivers/input/misc/ixp4xx-beeper.c1
-rw-r--r--drivers/input/mouse/alps.c5
-rw-r--r--drivers/input/mousedev.c3
-rw-r--r--drivers/input/serio/i8042-snirm.h75
-rw-r--r--drivers/input/serio/i8042-x86ia64io.h7
-rw-r--r--drivers/input/serio/i8042.c3
-rw-r--r--drivers/input/serio/i8042.h2
-rw-r--r--drivers/input/tablet/wacom.h6
-rw-r--r--drivers/input/tablet/wacom_sys.c6
-rw-r--r--drivers/input/tablet/wacom_wac.c31
-rw-r--r--drivers/input/tablet/wacom_wac.h1
-rw-r--r--drivers/input/touchscreen/ads7846.c2
-rw-r--r--drivers/leds/leds-gpio.c20
-rw-r--r--drivers/lguest/Makefile8
-rw-r--r--drivers/lguest/core.c18
-rw-r--r--drivers/lguest/hypercalls.c11
-rw-r--r--drivers/lguest/interrupts_and_traps.c7
-rw-r--r--drivers/lguest/lguest_device.c11
-rw-r--r--drivers/lguest/lguest_user.c32
-rw-r--r--drivers/lguest/page_tables.c32
-rw-r--r--drivers/lguest/x86/core.c33
-rw-r--r--drivers/lguest/x86/switcher_32.S8
-rw-r--r--drivers/md/dm-crypt.c58
-rw-r--r--drivers/md/dm-io.c2
-rw-r--r--drivers/md/dm-raid1.c4
-rw-r--r--drivers/md/dm-snap.c2
-rw-r--r--drivers/md/kcopyd.c10
-rw-r--r--drivers/md/kcopyd.h4
-rw-r--r--drivers/md/md.c12
-rw-r--r--drivers/md/raid5.c6
-rw-r--r--drivers/media/common/saa7146_core.c13
-rw-r--r--drivers/media/common/saa7146_fops.c2
-rw-r--r--drivers/media/dvb/dvb-core/dvb_net.c4
-rw-r--r--drivers/media/dvb/dvb-usb/opera1.c2
-rw-r--r--drivers/media/radio/radio-cadet.c6
-rw-r--r--drivers/media/video/Kconfig4
-rw-r--r--drivers/media/video/adv7170.c2
-rw-r--r--drivers/media/video/adv7175.c2
-rw-r--r--drivers/media/video/bt819.c2
-rw-r--r--drivers/media/video/bt856.c2
-rw-r--r--drivers/media/video/bt8xx/bttv-driver.c32
-rw-r--r--drivers/media/video/cx23885/cx23885-cards.c6
-rw-r--r--drivers/media/video/cx23885/cx23885-core.c134
-rw-r--r--drivers/media/video/cx88/cx88-cards.c5
-rw-r--r--drivers/media/video/cx88/cx88-video.c2
-rw-r--r--drivers/media/video/dpc7146.c2
-rw-r--r--drivers/media/video/em28xx/em28xx-core.c2
-rw-r--r--drivers/media/video/ivtv/ivtv-driver.c7
-rw-r--r--drivers/media/video/ivtv/ivtv-firmware.c8
-rw-r--r--drivers/media/video/mt20xx.c2
-rw-r--r--drivers/media/video/mxb.c5
-rw-r--r--drivers/media/video/pvrusb2/pvrusb2-ctrl.c4
-rw-r--r--drivers/media/video/pvrusb2/pvrusb2-hdw.c6
-rw-r--r--drivers/media/video/pvrusb2/pvrusb2-io.c2
-rw-r--r--drivers/media/video/pvrusb2/pvrusb2-ioread.c2
-rw-r--r--drivers/media/video/pwc/pwc-if.c7
-rw-r--r--drivers/media/video/saa7110.c4
-rw-r--r--drivers/media/video/saa7111.c2
-rw-r--r--drivers/media/video/saa7114.c2
-rw-r--r--drivers/media/video/saa7134/saa7134-cards.c41
-rw-r--r--drivers/media/video/saa7134/saa7134-core.c5
-rw-r--r--drivers/media/video/saa7185.c2
-rw-r--r--drivers/media/video/tda9840.c2
-rw-r--r--drivers/media/video/tea6415c.c2
-rw-r--r--drivers/media/video/tea6420.c2
-rw-r--r--drivers/media/video/tvp5150.c8
-rw-r--r--drivers/media/video/usbvideo/usbvideo.c9
-rw-r--r--drivers/media/video/v4l1-compat.c50
-rw-r--r--drivers/media/video/v4l2-int-device.c2
-rw-r--r--drivers/media/video/zoran_driver.c2
-rw-r--r--drivers/media/video/zr364xx.c2
-rw-r--r--drivers/memstick/core/memstick.c9
-rw-r--r--drivers/memstick/core/mspro_block.c94
-rw-r--r--drivers/memstick/host/jmb38x_ms.c113
-rw-r--r--drivers/memstick/host/tifm_ms.c21
-rw-r--r--drivers/message/fusion/mptbase.c276
-rw-r--r--drivers/message/fusion/mptscsih.c11
-rw-r--r--drivers/mfd/asic3.c4
-rw-r--r--drivers/misc/fujitsu-laptop.c2
-rw-r--r--drivers/misc/ibmasm/module.c2
-rw-r--r--drivers/misc/lkdtm.c2
-rw-r--r--drivers/mmc/core/Makefile2
-rw-r--r--drivers/mmc/core/bus.c23
-rw-r--r--drivers/mmc/core/bus.h11
-rw-r--r--drivers/mmc/core/core.h2
-rw-r--r--drivers/mmc/core/mmc.c90
-rw-r--r--drivers/mmc/core/sd.c95
-rw-r--r--drivers/mmc/core/sdio.c2
-rw-r--r--drivers/mmc/core/sysfs.c43
-rw-r--r--drivers/mmc/core/sysfs.h26
-rw-r--r--drivers/mtd/devices/block2mtd.c1
-rw-r--r--drivers/mtd/maps/physmap.c15
-rw-r--r--drivers/mtd/nand/rtc_from4.c2
-rw-r--r--drivers/net/dm9000.c2
-rw-r--r--drivers/net/fec_mpc52xx_phy.c3
-rw-r--r--drivers/net/plip.c7
-rw-r--r--drivers/net/sky2.c6
-rw-r--r--drivers/net/usb/rtl8150.c2
-rw-r--r--drivers/pci/hotplug/pciehp_core.c2
-rw-r--r--drivers/pci/intel-iommu.c7
-rw-r--r--drivers/pci/pci.c21
-rw-r--r--drivers/pci/quirks.c11
-rw-r--r--drivers/pci/setup-bus.c5
-rw-r--r--drivers/pnp/isapnp/core.c25
-rw-r--r--drivers/pnp/pnpacpi/rsparser.c8
-rw-r--r--drivers/rtc/Kconfig2
-rw-r--r--drivers/rtc/rtc-at91sam9.c6
-rw-r--r--drivers/scsi/Kconfig2
-rw-r--r--drivers/scsi/a100u2w.c9
-rw-r--r--drivers/scsi/advansys.c2
-rw-r--r--drivers/scsi/arcmsr/arcmsr.h14
-rw-r--r--drivers/scsi/gdth.c7
-rw-r--r--drivers/scsi/hosts.c16
-rw-r--r--drivers/scsi/libsas/sas_discover.c5
-rw-r--r--drivers/scsi/mvsas.c711
-rw-r--r--drivers/scsi/scsi_lib.c5
-rw-r--r--drivers/scsi/sd.c1
-rw-r--r--drivers/scsi/sr.c1
-rw-r--r--drivers/serial/8250_pci.c7
-rw-r--r--drivers/serial/atmel_serial.c30
-rw-r--r--drivers/serial/sh-sci.c4
-rw-r--r--drivers/thermal/Kconfig2
-rw-r--r--drivers/thermal/thermal.c169
-rw-r--r--drivers/uio/uio.c2
-rw-r--r--drivers/usb/core/message.c5
-rw-r--r--drivers/usb/core/quirks.c3
-rw-r--r--drivers/usb/gadget/inode.c4
-rw-r--r--drivers/usb/host/ehci-hub.c5
-rw-r--r--drivers/usb/host/ehci-pci.c14
-rw-r--r--drivers/usb/host/ohci-hcd.c2
-rw-r--r--drivers/usb/host/ohci-q.c2
-rw-r--r--drivers/usb/misc/usbtest.c3
-rw-r--r--drivers/usb/serial/cp2101.c1
-rw-r--r--drivers/usb/serial/keyspan.h4
-rw-r--r--drivers/usb/serial/pl2303.c1
-rw-r--r--drivers/usb/serial/pl2303.h1
-rw-r--r--drivers/usb/serial/sierra.c18
-rw-r--r--drivers/usb/serial/ti_usb_3410_5052.c4
-rw-r--r--drivers/usb/serial/visor.c2
-rw-r--r--drivers/usb/storage/isd200.c6
-rw-r--r--drivers/usb/storage/transport.c3
-rw-r--r--drivers/usb/storage/unusual_devs.h11
-rw-r--r--drivers/video/Kconfig14
-rw-r--r--drivers/video/Makefile1
-rw-r--r--drivers/video/bf54x-lq043fb.c2
-rw-r--r--drivers/video/bfin-t350mcqb-fb.c38
-rw-r--r--drivers/video/fb_defio.c22
-rw-r--r--drivers/video/i810/i810_main.c2
-rw-r--r--drivers/video/metronomefb.c999
-rw-r--r--drivers/virtio/virtio_pci.c7
-rw-r--r--drivers/watchdog/it8712f_wdt.c14
-rw-r--r--fs/afs/cell.c16
-rw-r--r--fs/afs/internal.h1
-rw-r--r--fs/afs/mntpt.c8
-rw-r--r--fs/afs/super.c1
-rw-r--r--fs/aio.c8
-rw-r--r--fs/anon_inodes.c18
-rw-r--r--fs/bio.c2
-rw-r--r--fs/buffer.c17
-rw-r--r--fs/cifs/cifs_dfs_ref.c19
-rw-r--r--fs/cifs/cifsacl.c29
-rw-r--r--fs/cifs/cifsproto.h9
-rw-r--r--fs/cifs/dir.c5
-rw-r--r--fs/cifs/dns_resolve.c8
-rw-r--r--fs/cifs/file.c4
-rw-r--r--fs/cifs/inode.c161
-rw-r--r--fs/cifs/link.c2
-rw-r--r--fs/dquot.c2
-rw-r--r--fs/ecryptfs/dentry.c2
-rw-r--r--fs/efs/inode.c2
-rw-r--r--fs/ext3/acl.c8
-rw-r--r--fs/ext3/resize.c4
-rw-r--r--fs/ext3/xattr.c4
-rw-r--r--fs/file_table.c6
-rw-r--r--fs/fs-writeback.c6
-rw-r--r--fs/hppfs/hppfs_kern.c435
-rw-r--r--fs/hugetlbfs/inode.c2
-rw-r--r--fs/isofs/compress.c11
-rw-r--r--fs/jbd/journal.c9
-rw-r--r--fs/jbd/recovery.c2
-rw-r--r--fs/jbd/revoke.c4
-rw-r--r--fs/jbd/transaction.c8
-rw-r--r--fs/jbd2/journal.c12
-rw-r--r--fs/jbd2/recovery.c2
-rw-r--r--fs/jbd2/revoke.c4
-rw-r--r--fs/locks.c4
-rw-r--r--fs/namei.c69
-rw-r--r--fs/namespace.c200
-rw-r--r--fs/nfs/read.c5
-rw-r--r--fs/nfs/super.c2
-rw-r--r--fs/nfs/write.c8
-rw-r--r--fs/open.c12
-rw-r--r--fs/pipe.c19
-rw-r--r--fs/pnode.c2
-rw-r--r--fs/proc/base.c22
-rw-r--r--fs/proc/task_mmu.c50
-rw-r--r--fs/reiserfs/do_balan.c8
-rw-r--r--fs/reiserfs/fix_node.c8
-rw-r--r--fs/reiserfs/lbalance.c2
-rw-r--r--fs/reiserfs/namei.c2
-rw-r--r--fs/reiserfs/xattr.c110
-rw-r--r--fs/romfs/inode.c30
-rw-r--r--fs/smbfs/smbiod.c2
-rw-r--r--fs/super.c7
-rw-r--r--fs/sysfs/file.c8
-rw-r--r--fs/ufs/balloc.c4
-rw-r--r--include/asm-alpha/current.h2
-rw-r--r--include/asm-alpha/dma-mapping.h2
-rw-r--r--include/asm-alpha/kvm.h6
-rw-r--r--include/asm-alpha/pci.h8
-rw-r--r--include/asm-arm/arch-at91/at91cap9.h7
-rw-r--r--include/asm-arm/arch-omap/dsp_common.h8
-rw-r--r--include/asm-arm/arch-s3c2410/irqs.h2
-rw-r--r--include/asm-arm/kvm.h6
-rw-r--r--include/asm-avr32/byteorder.h6
-rw-r--r--include/asm-avr32/kvm.h6
-rw-r--r--include/asm-blackfin/kvm.h6
-rw-r--r--include/asm-cris/kvm.h6
-rw-r--r--include/asm-frv/kvm.h6
-rw-r--r--include/asm-frv/system.h4
-rw-r--r--include/asm-generic/Kbuild.asm2
-rw-r--r--include/asm-h8300/kvm.h6
-rw-r--r--include/asm-ia64/kvm.h6
-rw-r--r--include/asm-m32r/kvm.h6
-rw-r--r--include/asm-m68k/kvm.h6
-rw-r--r--include/asm-m68knommu/kvm.h6
-rw-r--r--include/asm-mips/kvm.h6
-rw-r--r--include/asm-mips/mach-au1x00/au1000.h1
-rw-r--r--include/asm-mn10300/kvm.h6
-rw-r--r--include/asm-parisc/kvm.h6
-rw-r--r--include/asm-powerpc/kvm.h6
-rw-r--r--include/asm-s390/kvm.h6
-rw-r--r--include/asm-sh/byteorder.h15
-rw-r--r--include/asm-sh/floppy.h268
-rw-r--r--include/asm-sh/fpu.h39
-rw-r--r--include/asm-sh/kvm.h6
-rw-r--r--include/asm-sh/posix_types.h6
-rw-r--r--include/asm-sh/processor.h1
-rw-r--r--include/asm-sh/processor_32.h1
-rw-r--r--include/asm-sh/processor_64.h1
-rw-r--r--include/asm-sparc/kvm.h6
-rw-r--r--include/asm-sparc64/backoff.h3
-rw-r--r--include/asm-sparc64/cpudata.h2
-rw-r--r--include/asm-sparc64/dcu.h41
-rw-r--r--include/asm-sparc64/hvtramp.h2
-rw-r--r--include/asm-sparc64/irq.h1
-rw-r--r--include/asm-sparc64/kvm.h6
-rw-r--r--include/asm-sparc64/pgtable.h12
-rw-r--r--include/asm-sparc64/processor.h3
-rw-r--r--include/asm-sparc64/spitfire.h2
-rw-r--r--include/asm-sparc64/stacktrace.h6
-rw-r--r--include/asm-sparc64/timer.h9
-rw-r--r--include/asm-um/kvm.h6
-rw-r--r--include/asm-v850/kvm.h6
-rw-r--r--include/asm-x86/cmpxchg_32.h32
-rw-r--r--include/asm-x86/e820_32.h2
-rw-r--r--include/asm-x86/e820_64.h2
-rw-r--r--include/asm-x86/io_32.h6
-rw-r--r--include/asm-x86/io_64.h6
-rw-r--r--include/asm-x86/lguest_hcall.h2
-rw-r--r--include/asm-x86/mach-rdc321x/gpio.h9
-rw-r--r--include/asm-x86/mach-rdc321x/rdc321x_defs.h8
-rw-r--r--include/asm-x86/page.h4
-rw-r--r--include/asm-x86/pgtable.h2
-rw-r--r--include/asm-x86/sync_bitops.h9
-rw-r--r--include/asm-xtensa/kvm.h6
-rw-r--r--include/linux/Kbuild5
-rw-r--r--include/linux/bitops.h40
-rw-r--r--include/linux/compat.h4
-rw-r--r--include/linux/cpuidle.h4
-rw-r--r--include/linux/dmaengine.h2
-rw-r--r--include/linux/hardirq.h7
-rw-r--r--include/linux/ide.h2
-rw-r--r--include/linux/input.h5
-rw-r--r--include/linux/iocontext.h3
-rw-r--r--include/linux/jbd.h11
-rw-r--r--include/linux/lguest_launcher.h6
-rw-r--r--include/linux/libata.h10
-rw-r--r--include/linux/memstick.h1
-rw-r--r--include/linux/mount.h2
-rw-r--r--include/linux/pci.h4
-rw-r--r--include/linux/pnp.h2
-rw-r--r--include/linux/ps2esdi.h98
-rw-r--r--include/linux/rcupreempt.h4
-rw-r--r--include/linux/sched.h10
-rw-r--r--include/linux/security.h3
-rw-r--r--include/linux/topology.h3
-rw-r--r--include/linux/usb/quirks.h3
-rw-r--r--include/linux/usb_usual.h4
-rw-r--r--kernel/acct.c23
-rw-r--r--kernel/audit.c6
-rw-r--r--kernel/cgroup.c4
-rw-r--r--kernel/fork.c2
-rw-r--r--kernel/futex.c6
-rw-r--r--kernel/futex_compat.c2
-rw-r--r--kernel/marker.c40
-rw-r--r--kernel/printk.c83
-rw-r--r--kernel/relay.c12
-rw-r--r--kernel/sched.c71
-rw-r--r--kernel/sched_debug.c1
-rw-r--r--kernel/sched_fair.c205
-rw-r--r--kernel/time/clocksource.c16
-rw-r--r--kernel/time/timekeeping.c4
-rw-r--r--kernel/timer.c10
-rw-r--r--lib/iomap.c2
-rw-r--r--lib/kobject_uevent.c2
-rw-r--r--mm/bootmem.c25
-rw-r--r--mm/filemap.c20
-rw-r--r--mm/fremap.c2
-rw-r--r--mm/highmem.c30
-rw-r--r--mm/hugetlb.c17
-rw-r--r--mm/memcontrol.c2
-rw-r--r--mm/oom_kill.c9
-rw-r--r--mm/pagewalk.c10
-rw-r--r--mm/readahead.c5
-rw-r--r--mm/rmap.c13
-rw-r--r--mm/shmem.c25
-rw-r--r--mm/slab.c9
-rw-r--r--mm/slub.c17
-rw-r--r--mm/sparse-vmemmap.c8
-rw-r--r--mm/swap.c5
-rw-r--r--mm/swap_state.c2
-rw-r--r--mm/tiny-shmem.c10
-rw-r--r--mm/vmalloc.c6
-rw-r--r--mm/vmscan.c27
-rw-r--r--net/9p/trans_fd.c2
-rw-r--r--net/core/sock.c4
-rw-r--r--net/rxrpc/ar-internal.h2
-rw-r--r--net/rxrpc/rxkad.c27
-rw-r--r--net/sunrpc/xprtrdma/svc_rdma_recvfrom.c23
-rw-r--r--scripts/Makefile.modpost6
-rwxr-xr-xscripts/checkpatch.pl463
-rw-r--r--scripts/mod/file2alias.c4
-rw-r--r--scripts/mod/modpost.c5
-rw-r--r--scripts/mod/modpost.h1
-rw-r--r--security/capability.c1
-rw-r--r--security/commoncap.c40
-rw-r--r--security/selinux/hooks.c9
-rw-r--r--security/smack/smack_lsm.c14
-rw-r--r--security/smack/smackfs.c35
-rw-r--r--sound/oss/ac97_codec.c2
-rw-r--r--sound/soc/codecs/tlv320aic3x.c2
613 files changed, 11365 insertions, 7843 deletions
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index 08a1ed1cb5d..47a539c7642 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -512,7 +512,7 @@ They provide type safety, have no length limitations, no formatting
limitations, and under gcc they are as cheap as macros.
Macros should only be used for cases where a static inline is clearly
-suboptimal [there a few, isolated cases of this in fast paths],
+suboptimal [there are a few, isolated cases of this in fast paths],
or where it is impossible to use a static inline function [such as
string-izing].
diff --git a/Documentation/fb/cmap_xfbdev.txt b/Documentation/fb/cmap_xfbdev.txt
new file mode 100644
index 00000000000..55e1f0a3d2b
--- /dev/null
+++ b/Documentation/fb/cmap_xfbdev.txt
@@ -0,0 +1,53 @@
+Understanding fbdev's cmap
+--------------------------
+
+These notes explain how X's dix layer uses fbdev's cmap structures.
+
+*. example of relevant structures in fbdev as used for a 3-bit grayscale cmap
+struct fb_var_screeninfo {
+ .bits_per_pixel = 8,
+ .grayscale = 1,
+ .red = { 4, 3, 0 },
+ .green = { 0, 0, 0 },
+ .blue = { 0, 0, 0 },
+}
+struct fb_fix_screeninfo {
+ .visual = FB_VISUAL_STATIC_PSEUDOCOLOR,
+}
+for (i = 0; i < 8; i++)
+ info->cmap.red[i] = (((2*i)+1)*(0xFFFF))/16;
+memcpy(info->cmap.green, info->cmap.red, sizeof(u16)*8);
+memcpy(info->cmap.blue, info->cmap.red, sizeof(u16)*8);
+
+*. X11 apps do something like the following when trying to use grayscale.
+for (i=0; i < 8; i++) {
+ char colorspec[64];
+ memset(colorspec,0,64);
+ sprintf(colorspec, "rgb:%x/%x/%x", i*36,i*36,i*36);
+ if (!XParseColor(outputDisplay, testColormap, colorspec, &wantedColor))
+ printf("Can't get color %s\n",colorspec);
+ XAllocColor(outputDisplay, testColormap, &wantedColor);
+ grays[i] = wantedColor;
+}
+There's also named equivalents like gray1..x provided you have an rgb.txt.
+
+Somewhere in X's callchain, this results in a call to X code that handles the
+colormap. For example, Xfbdev hits the following:
+
+xc-011010/programs/Xserver/dix/colormap.c:
+
+FindBestPixel(pentFirst, size, prgb, channel)
+
+dr = (long) pent->co.local.red - prgb->red;
+dg = (long) pent->co.local.green - prgb->green;
+db = (long) pent->co.local.blue - prgb->blue;
+sq = dr * dr;
+UnsignedToBigNum (sq, &sum);
+BigNumAdd (&sum, &temp, &sum);
+
+co.local.red are entries that were brought in through FBIOGETCMAP which come
+directly from the info->cmap.red that was listed above. The prgb is the rgb
+that the app wants to match to. The above code is doing what looks like a least
+squares matching function. That's why the cmap entries can't be set to the left
+hand side boundaries of a color range.
+
diff --git a/Documentation/fb/metronomefb.txt b/Documentation/fb/metronomefb.txt
new file mode 100644
index 00000000000..b9a2e7b7e83
--- /dev/null
+++ b/Documentation/fb/metronomefb.txt
@@ -0,0 +1,38 @@
+ Metronomefb
+ -----------
+Maintained by Jaya Kumar <jayakumar.lkml.gmail.com>
+Last revised: Nov 20, 2007
+
+Metronomefb is a driver for the Metronome display controller. The controller
+is from E-Ink Corporation. It is intended to be used to drive the E-Ink
+Vizplex display media. E-Ink hosts some details of this controller and the
+display media here http://www.e-ink.com/products/matrix/metronome.html .
+
+Metronome is interfaced to the host CPU through the AMLCD interface. The
+host CPU generates the control information and the image in a framebuffer
+which is then delivered to the AMLCD interface by a host specific method.
+Currently, that's implemented for the PXA's LCDC controller. The display and
+error status are each pulled through individual GPIOs.
+
+Metronomefb was written for the PXA255/gumstix/lyre combination and
+therefore currently has board set specific code in it. If other boards based on
+other architectures are available, then the host specific code can be separated
+and abstracted out.
+
+Metronomefb requires waveform information which is delivered via the AMLCD
+interface to the metronome controller. The waveform information is expected to
+be delivered from userspace via the firmware class interface. The waveform file
+can be compressed as long as your udev or hotplug script is aware of the need
+to uncompress it before delivering it. metronomefb will ask for waveform.wbf
+which would typically go into /lib/firmware/waveform.wbf depending on your
+udev/hotplug setup. I have only tested with a single waveform file which was
+originally labeled 23P01201_60_WT0107_MTC. I do not know what it stands for.
+Caution should be exercised when manipulating the waveform as there may be
+a possibility that it could have some permanent effects on the display media.
+I neither have access to nor know exactly what the waveform does in terms of
+the physical media.
+
+Metronomefb uses the deferred IO interface so that it can provide a memory
+mappable frame buffer. It has been tested with tinyx (Xfbdev). It is known
+to work at this time with xeyes, xclock, xloadimage, xpdf.
+
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 1d171fe5fcd..ee3cc8b8c84 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -172,16 +172,6 @@ Who: Len Brown <len.brown@intel.com>
---------------------------
-What: ide-tape driver
-When: July 2008
-Files: drivers/ide/ide-tape.c
-Why: This driver might not have any users anymore and maintaining it for no
- reason is an effort no one wants to make.
-Who: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>, Borislav Petkov
- <petkovbb@googlemail.com>
-
----------------------------
-
What: libata spindown skipping and warning
When: Dec 2008
Why: Some halt(8) implementations synchronize caches for and spin
diff --git a/Documentation/hw_random.txt b/Documentation/hw_random.txt
index bb58c36b584..690f52550c8 100644
--- a/Documentation/hw_random.txt
+++ b/Documentation/hw_random.txt
@@ -1,33 +1,26 @@
- Hardware driver for Intel/AMD/VIA Random Number Generators (RNG)
- Copyright 2000,2001 Jeff Garzik <jgarzik@pobox.com>
- Copyright 2000,2001 Philipp Rumpf <prumpf@mandrakesoft.com>
-
Introduction:
- The hw_random device driver is software that makes use of a
+ The hw_random framework is software that makes use of a
special hardware feature on your CPU or motherboard,
- a Random Number Generator (RNG).
+ a Random Number Generator (RNG). The software has two parts:
+ a core providing the /dev/hw_random character device and its
+ sysfs support, plus a hardware-specific driver that plugs
+ into that core.
- In order to make effective use of this device driver, you
+ To make the most effective use of these mechanisms, you
should download the support software as well. Download the
latest version of the "rng-tools" package from the
hw_random driver's official Web site:
http://sourceforge.net/projects/gkernel/
-About the Intel RNG hardware, from the firmware hub datasheet:
-
- The Firmware Hub integrates a Random Number Generator (RNG)
- using thermal noise generated from inherently random quantum
- mechanical properties of silicon. When not generating new random
- bits the RNG circuitry will enter a low power state. Intel will
- provide a binary software driver to give third party software
- access to our RNG for use as a security feature. At this time,
- the RNG is only to be used with a system in an OS-present state.
+ Those tools use /dev/hw_random to fill the kernel entropy pool,
+ which is used internally and exported by the /dev/urandom and
+ /dev/random special files.
Theory of operation:
- Character driver. Using the standard open()
+ CHARACTER DEVICE. Using the standard open()
and read() system calls, you can read random data from
the hardware RNG device. This data is NOT CHECKED by any
fitness tests, and could potentially be bogus (if the
@@ -36,9 +29,37 @@ Theory of operation:
a security-conscious person would run fitness tests on the
data before assuming it is truly random.
- /dev/hwrandom is char device major 10, minor 183.
+ The rng-tools package uses such tests in "rngd", and lets you
+ run them by hand with a "rngtest" utility.
+
+ /dev/hw_random is char device major 10, minor 183.
+
+ CLASS DEVICE. There is a /sys/class/misc/hw_random node with
+ two unique attributes, "rng_available" and "rng_current". The
+ "rng_available" attribute lists the hardware-specific drivers
+ available, while "rng_current" lists the one which is currently
+ connected to /dev/hw_random. If your system has more than one
+ RNG available, you may change the one used by writing a name from
+ the list in "rng_available" into "rng_current".
+
+==========================================================================
+
+ Hardware driver for Intel/AMD/VIA Random Number Generators (RNG)
+ Copyright 2000,2001 Jeff Garzik <jgarzik@pobox.com>
+ Copyright 2000,2001 Philipp Rumpf <prumpf@mandrakesoft.com>
+
+
+About the Intel RNG hardware, from the firmware hub datasheet:
+
+ The Firmware Hub integrates a Random Number Generator (RNG)
+ using thermal noise generated from inherently random quantum
+ mechanical properties of silicon. When not generating new random
+ bits the RNG circuitry will enter a low power state. Intel will
+ provide a binary software driver to give third party software
+ access to our RNG for use as a security feature. At this time,
+ the RNG is only to be used with a system in an OS-present state.
-Driver notes:
+Intel RNG Driver notes:
* FIXME: support poll(2)
diff --git a/Documentation/i386/IO-APIC.txt b/Documentation/i386/IO-APIC.txt
index f95166645d2..30b4c714fbe 100644
--- a/Documentation/i386/IO-APIC.txt
+++ b/Documentation/i386/IO-APIC.txt
@@ -70,7 +70,7 @@ Every PCI card emits a PCI IRQ, which can be INTA, INTB, INTC or INTD:
These INTA-D PCI IRQs are always 'local to the card', their real meaning
depends on which slot they are in. If you look at the daisy chaining diagram,
-a card in slot4, issuing INTA IRQ, it will end up as a signal on PIRQ2 of
+a card in slot4, issuing INTA IRQ, it will end up as a signal on PIRQ4 of
the PCI chipset. Most cards issue INTA, this creates optimal distribution
between the PIRQ lines. (distributing IRQ sources properly is not a
necessity, PCI IRQs can be shared at will, but it's a good for performance
diff --git a/Documentation/ide/ide.txt b/Documentation/ide/ide.txt
index e3b3425328b..818676aad45 100644
--- a/Documentation/ide/ide.txt
+++ b/Documentation/ide/ide.txt
@@ -105,7 +105,7 @@ Drives are normally found by auto-probing and/or examining the CMOS/BIOS data.
For really weird situations, the apparent (fdisk) geometry can also be specified
on the kernel "command line" using LILO. The format of such lines is:
- hdx=cyls,heads,sects,wpcom,irq
+ hdx=cyls,heads,sects
or hdx=cdrom
where hdx can be any of hda through hdh, Three values are required
@@ -214,9 +214,9 @@ driver using the "options=" keyword to insmod, while replacing any ',' with
Summary of ide driver parameters for kernel command line
--------------------------------------------------------
- "hdx=" is recognized for all "x" from "a" to "h", such as "hdc".
+ "hdx=" is recognized for all "x" from "a" to "u", such as "hdc".
- "idex=" is recognized for all "x" from "0" to "3", such as "ide1".
+ "idex=" is recognized for all "x" from "0" to "9", such as "ide1".
"hdx=noprobe" : drive may be present, but do not probe for it
@@ -228,13 +228,6 @@ Summary of ide driver parameters for kernel command line
"hdx=cyl,head,sect" : disk drive is present, with specified geometry
- "hdx=remap" : remap access of sector 0 to sector 1 (for EZDrive)
-
- "hdx=remap63" : remap the drive: add 63 to all sector numbers
- (for DM OnTrack)
-
- "idex=noautotune" : driver will NOT attempt to tune interface speed
-
"hdx=autotune" : driver will attempt to tune interface speed
to the fastest PIO mode supported,
if possible for this drive only.
@@ -244,10 +237,6 @@ Summary of ide driver parameters for kernel command line
"hdx=nodma" : disallow DMA
- "hdx=scsi" : the return of the ide-scsi flag, this is useful for
- allowing ide-floppy, ide-tape, and ide-cdrom|writers
- to use ide-scsi emulation on a device specific option.
-
"idebus=xx" : inform IDE driver of VESA/PCI bus speed in MHz,
where "xx" is between 20 and 66 inclusive,
used when tuning chipset PIO modes.
@@ -282,10 +271,6 @@ Summary of ide driver parameters for kernel command line
"ide=reverse" : formerly called to pci sub-system, but now local.
-The following are valid ONLY on ide0, which usually corresponds
-to the first ATA interface found on the particular host, and the defaults for
-the base,ctl ports must not be altered.
-
"ide=doubler" : probe/support IDE doublers on Amiga
There may be more options than shown -- use the source, Luke!
diff --git a/Documentation/input/notifier.txt b/Documentation/input/notifier.txt
new file mode 100644
index 00000000000..95172ca6f3d
--- /dev/null
+++ b/Documentation/input/notifier.txt
@@ -0,0 +1,52 @@
+Keyboard notifier
+
+One can use register_keyboard_notifier to get called back on keyboard
+events (see kbd_keycode() function for details). The passed structure is
+keyboard_notifier_param:
+
+- 'vc' always provide the VC for which the keyboard event applies;
+- 'down' is 1 for a key press event, 0 for a key release;
+- 'shift' is the current modifier state, mask bit indexes are KG_*;
+- 'value' depends on the type of event.
+
+- KBD_KEYCODE events are always sent before other events, value is the keycode.
+- KBD_UNBOUND_KEYCODE events are sent if the keycode is not bound to a keysym.
+ value is the keycode.
+- KBD_UNICODE events are sent if the keycode -> keysym translation produced a
+ unicode character. value is the unicode value.
+- KBD_KEYSYM events are sent if the keycode -> keysym translation produced a
+ non-unicode character. value is the keysym.
+- KBD_POST_KEYSYM events are sent after the treatment of non-unicode keysyms.
+ That permits one to inspect the resulting LEDs for instance.
+
+For each kind of event but the last, the callback may return NOTIFY_STOP in
+order to "eat" the event: the notify loop is stopped and the keyboard event is
+dropped.
+
+In a rough C snippet, we have:
+
+kbd_keycode(keycode) {
+ ...
+ params.value = keycode;
+ if (notifier_call_chain(KBD_KEYCODE,&params) == NOTIFY_STOP)
+ || !bound) {
+ notifier_call_chain(KBD_UNBOUND_KEYCODE,&params);
+ return;
+ }
+
+ if (unicode) {
+ param.value = unicode;
+ if (notifier_call_chain(KBD_UNICODE,&params) == NOTIFY_STOP)
+ return;
+ emit unicode;
+ return;
+ }
+
+ params.value = keysym;
+ if (notifier_call_chain(KBD_KEYSYM,&params) == NOTIFY_STOP)
+ return;
+ apply keysym;
+ notifier_call_chain(KBD_POST_KEYSYM,&params);
+}
+
+NOTE: This notifier is usually called from interrupt context.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 622f7849edb..4cd1a5da80a 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -170,11 +170,6 @@ and is between 256 and 4096 characters. It is defined in the file
acpi_irq_isa= [HW,ACPI] If irq_balance, mark listed IRQs used by ISA
Format: <irq>,<irq>...
- acpi_new_pts_ordering [HW,ACPI]
- Enforce the ACPI 2.0 ordering of the _PTS control
- method wrt putting devices into low power states
- default: pre ACPI 2.0 ordering of _PTS
-
acpi_no_auto_ssdt [HW,ACPI] Disable automatic loading of SSDT
acpi_os_name= [HW,ACPI] Tell ACPI BIOS the name of the OS
@@ -732,6 +727,8 @@ and is between 256 and 4096 characters. It is defined in the file
(Don't attempt to blink the leds)
i8042.noaux [HW] Don't check for auxiliary (== mouse) port
i8042.nokbd [HW] Don't check/create keyboard port
+ i8042.noloop [HW] Disable the AUX Loopback command while probing
+ for the AUX port
i8042.nomux [HW] Don't check presence of an active multiplexing
controller
i8042.nopnp [HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX
@@ -1128,6 +1125,10 @@ and is between 256 and 4096 characters. It is defined in the file
memmap=nn[KMG]$ss[KMG]
[KNL,ACPI] Mark specific memory as reserved.
Region of memory to be used, from ss to ss+nn.
+ Example: Exclude memory from 0x18690000-0x1869ffff
+ memmap=64K$0x18690000
+ or
+ memmap=0x10000$0x18690000
meye.*= [HW] Set MotionEye Camera parameters
See Documentation/video4linux/meye.txt.
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index bec5a32e409..4c1fc65a8b3 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -1,7 +1,7 @@
/*P:100 This is the Launcher code, a simple program which lays out the
- * "physical" memory for the new Guest by mapping the kernel image and the
- * virtual devices, then reads repeatedly from /dev/lguest to run the Guest.
-:*/
+ * "physical" memory for the new Guest by mapping the kernel image and
+ * the virtual devices, then opens /dev/lguest to tell the kernel
+ * about the Guest and control it. :*/
#define _LARGEFILE64_SOURCE
#define _GNU_SOURCE
#include <stdio.h>
@@ -43,7 +43,7 @@
#include "linux/virtio_console.h"
#include "linux/virtio_ring.h"
#include "asm-x86/bootparam.h"
-/*L:110 We can ignore the 38 include files we need for this program, but I do
+/*L:110 We can ignore the 39 include files we need for this program, but I do
* want to draw attention to the use of kernel-style types.
*
* As Linus said, "C is a Spartan language, and so should your naming be." I
@@ -320,7 +320,7 @@ static unsigned long map_elf(int elf_fd, const Elf32_Ehdr *ehdr)
err(1, "Reading program headers");
/* Try all the headers: there are usually only three. A read-only one,
- * a read-write one, and a "note" section which isn't loadable. */
+ * a read-write one, and a "note" section which we don't load. */
for (i = 0; i < ehdr->e_phnum; i++) {
/* If this isn't a loadable segment, we ignore it */
if (phdr[i].p_type != PT_LOAD)
@@ -387,7 +387,7 @@ static unsigned long load_kernel(int fd)
if (memcmp(hdr.e_ident, ELFMAG, SELFMAG) == 0)
return map_elf(fd, &hdr);
- /* Otherwise we assume it's a bzImage, and try to unpack it */
+ /* Otherwise we assume it's a bzImage, and try to load it. */
return load_bzimage(fd);
}
@@ -433,12 +433,12 @@ static unsigned long load_initrd(const char *name, unsigned long mem)
return len;
}
-/* Once we know how much memory we have, we can construct simple linear page
+/* Once we know how much memory we have we can construct simple linear page
* tables which set virtual == physical which will get the Guest far enough
* into the boot to create its own.
*
* We lay them out of the way, just below the initrd (which is why we need to
- * know its size). */
+ * know its size here). */
static unsigned long setup_pagetables(unsigned long mem,
unsigned long initrd_size)
{
@@ -850,7 +850,8 @@ static void handle_console_output(int fd, struct virtqueue *vq)
*
* Handling output for network is also simple: we get all the output buffers
* and write them (ignoring the first element) to this device's file descriptor
- * (stdout). */
+ * (/dev/net/tun).
+ */
static void handle_net_output(int fd, struct virtqueue *vq)
{
unsigned int head, out, in;
@@ -924,7 +925,7 @@ static void enable_fd(int fd, struct virtqueue *vq)
write(waker_fd, &vq->dev->fd, sizeof(vq->dev->fd));
}
-/* Resetting a device is fairly easy. */
+/* When the Guest asks us to reset a device, it's is fairly easy. */
static void reset_device(struct device *dev)
{
struct virtqueue *vq;
@@ -1003,8 +1004,8 @@ static void handle_input(int fd)
if (select(devices.max_infd+1, &fds, NULL, NULL, &poll) == 0)
break;
- /* Otherwise, call the device(s) which have readable
- * file descriptors and a method of handling them. */
+ /* Otherwise, call the device(s) which have readable file
+ * descriptors and a method of handling them. */
for (i = devices.dev; i; i = i->next) {
if (i->handle_input && FD_ISSET(i->fd, &fds)) {
int dev_fd;
@@ -1015,8 +1016,7 @@ static void handle_input(int fd)
* should no longer service it. Networking and
* console do this when there's no input
* buffers to deliver into. Console also uses
- * it when it discovers that stdin is
- * closed. */
+ * it when it discovers that stdin is closed. */
FD_CLR(i->fd, &devices.infds);
/* Tell waker to ignore it too, by sending a
* negative fd number (-1, since 0 is a valid
@@ -1033,7 +1033,8 @@ static void handle_input(int fd)
*
* All devices need a descriptor so the Guest knows it exists, and a "struct
* device" so the Launcher can keep track of it. We have common helper
- * routines to allocate and manage them. */
+ * routines to allocate and manage them.
+ */
/* The layout of the device page is a "struct lguest_device_desc" followed by a
* number of virtqueue descriptors, then two sets of feature bits, then an
@@ -1078,7 +1079,7 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
struct virtqueue **i, *vq = malloc(sizeof(*vq));
void *p;
- /* First we need some pages for this virtqueue. */
+ /* First we need some memory for this virtqueue. */
pages = (vring_size(num_descs, getpagesize()) + getpagesize() - 1)
/ getpagesize();
p = get_pages(pages);
@@ -1122,7 +1123,7 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
}
/* The first half of the feature bitmask is for us to advertise features. The
- * second half if for the Guest to accept features. */
+ * second half is for the Guest to accept features. */
static void add_feature(struct device *dev, unsigned bit)
{
u8 *features = get_feature_bits(dev);
@@ -1151,7 +1152,9 @@ static void set_config(struct device *dev, unsigned len, const void *conf)
}
/* This routine does all the creation and setup of a new device, including
- * calling new_dev_desc() to allocate the descriptor and device memory. */
+ * calling new_dev_desc() to allocate the descriptor and device memory.
+ *
+ * See what I mean about userspace being boring? */
static struct device *new_device(const char *name, u16 type, int fd,
bool (*handle_input)(int, struct device *))
{
@@ -1383,7 +1386,6 @@ struct vblk_info
* Launcher triggers interrupt to Guest. */
int done_fd;
};
-/*:*/
/*L:210
* The Disk
@@ -1493,7 +1495,10 @@ static int io_thread(void *_dev)
while (read(vblk->workpipe[0], &c, 1) == 1) {
/* We acknowledge each request immediately to reduce latency,
* rather than waiting until we've done them all. I haven't
- * measured to see if it makes any difference. */
+ * measured to see if it makes any difference.
+ *
+ * That would be an interesting test, wouldn't it? You could
+ * also try having more than one I/O thread. */
while (service_io(dev))
write(vblk->done_fd, &c, 1);
}
@@ -1501,7 +1506,7 @@ static int io_thread(void *_dev)
}
/* Now we've seen the I/O thread, we return to the Launcher to see what happens
- * when the thread tells us it's completed some I/O. */
+ * when that thread tells us it's completed some I/O. */
static bool handle_io_finish(int fd, struct device *dev)
{
char c;
@@ -1573,11 +1578,12 @@ static void setup_block_file(const char *filename)
* more work. */
pipe(vblk->workpipe);
- /* Create stack for thread and run it */
+ /* Create stack for thread and run it. Since stack grows upwards, we
+ * point the stack pointer to the end of this region. */
stack = malloc(32768);
/* SIGCHLD - We dont "wait" for our cloned thread, so prevent it from
* becoming a zombie. */
- if (clone(io_thread, stack + 32768, CLONE_VM | SIGCHLD, dev) == -1)
+ if (clone(io_thread, stack + 32768, CLONE_VM | SIGCHLD, dev) == -1)
err(1, "Creating clone");
/* We don't need to keep the I/O thread's end of the pipes open. */
@@ -1587,14 +1593,14 @@ static void setup_block_file(const char *filename)
verbose("device %u: virtblock %llu sectors\n",
devices.device_num, le64_to_cpu(conf.capacity));
}
-/* That's the end of device setup. :*/
+/* That's the end of device setup. */
-/* Reboot */
+/*L:230 Reboot is pretty easy: clean up and exec() the Launcher afresh. */
static void __attribute__((noreturn)) restart_guest(void)
{
unsigned int i;
- /* Closing pipes causes the waker thread and io_threads to die, and
+ /* Closing pipes causes the Waker thread and io_threads to die, and
* closing /dev/lguest cleans up the Guest. Since we don't track all
* open fds, we simply close everything beyond stderr. */
for (i = 3; i < FD_SETSIZE; i++)
@@ -1603,7 +1609,7 @@ static void __attribute__((noreturn)) restart_guest(void)
err(1, "Could not exec %s", main_args[0]);
}
-/*L:220 Finally we reach the core of the Launcher, which runs the Guest, serves
+/*L:220 Finally we reach the core of the Launcher which runs the Guest, serves
* its input and output, and finally, lays it to rest. */
static void __attribute__((noreturn)) run_guest(int lguest_fd)
{
@@ -1644,7 +1650,7 @@ static void __attribute__((noreturn)) run_guest(int lguest_fd)
err(1, "Resetting break");
}
}
-/*
+/*L:240
* This is the end of the Launcher. The good news: we are over halfway
* through! The bad news: the most fiendish part of the code still lies ahead
* of us.
@@ -1691,8 +1697,8 @@ int main(int argc, char *argv[])
* device receive input from a file descriptor, we keep an fdset
* (infds) and the maximum fd number (max_infd) with the head of the
* list. We also keep a pointer to the last device. Finally, we keep
- * the next interrupt number to hand out (1: remember that 0 is used by
- * the timer). */
+ * the next interrupt number to use for devices (1: remember that 0 is
+ * used by the timer). */
FD_ZERO(&devices.infds);
devices.max_infd = -1;
devices.lastdev = NULL;
@@ -1793,8 +1799,8 @@ int main(int argc, char *argv[])
lguest_fd = tell_kernel(pgdir, start);
/* We fork off a child process, which wakes the Launcher whenever one
- * of the input file descriptors needs attention. Otherwise we would
- * run the Guest until it tries to output something. */
+ * of the input file descriptors needs attention. We call this the
+ * Waker, and we'll cover it in a moment. */
waker_fd = setup_waker(lguest_fd);
/* Finally, run the Guest. This doesn't return. */
diff --git a/Documentation/lguest/lguest.txt b/Documentation/lguest/lguest.txt
index 722d4e7fbeb..29510dc5151 100644
--- a/Documentation/lguest/lguest.txt
+++ b/Documentation/lguest/lguest.txt
@@ -1,6 +1,7 @@
-Rusty's Remarkably Unreliable Guide to Lguest
- - or, A Young Coder's Illustrated Hypervisor
-http://lguest.ozlabs.org
+ __
+ (___()'`; Rusty's Remarkably Unreliable Guide to Lguest
+ /, /` - or, A Young Coder's Illustrated Hypervisor
+ \\"--\\ http://lguest.ozlabs.org
Lguest is designed to be a minimal hypervisor for the Linux kernel, for
Linux developers and users to experiment with virtualization with the
@@ -41,12 +42,16 @@ Running Lguest:
CONFIG_PHYSICAL_ALIGN=0x100000)
"Device Drivers":
+ "Block devices"
+ "Virtio block driver (EXPERIMENTAL)" = M/Y
"Network device support"
"Universal TUN/TAP device driver support" = M/Y
- (CONFIG_TUN=m)
- "Virtualization"
- "Linux hypervisor example code" = M/Y
- (CONFIG_LGUEST=m)
+ "Virtio network driver (EXPERIMENTAL)" = M/Y
+ (CONFIG_VIRTIO_BLK=m, CONFIG_VIRTIO_NET=m and CONFIG_TUN=m)
+
+ "Virtualization"
+ "Linux hypervisor example code" = M/Y
+ (CONFIG_LGUEST=m)
- A tool called "lguest" is available in this directory: type "make"
to build it. If you didn't build your kernel in-tree, use "make
diff --git a/Documentation/mca.txt b/Documentation/mca.txt
index aabce4ad90f..510375d4209 100644
--- a/Documentation/mca.txt
+++ b/Documentation/mca.txt
@@ -143,14 +143,7 @@ MCA Device Drivers
Currently, there are a number of MCA-specific device drivers.
-1) PS/2 ESDI
- drivers/block/ps2esdi.c
- include/linux/ps2esdi.h
- Uses major number 36, and should use /dev files /dev/eda, /dev/edb.
- Supports two drives, but only one controller. May use the
- command-line args "ed=cyl,head,sec" and "tp720".
-
-2) PS/2 SCSI
+1) PS/2 SCSI
drivers/scsi/ibmmca.c
drivers/scsi/ibmmca.h
The driver for the IBM SCSI subsystem. Includes both integrated
@@ -159,25 +152,25 @@ Currently, there are a number of MCA-specific device drivers.
machine with a front-panel display (i.e. model 95), you can use
"ibmmcascsi=display" to enable a drive activity indicator.
-3) 3c523
+2) 3c523
drivers/net/3c523.c
drivers/net/3c523.h
3Com 3c523 Etherlink/MC ethernet driver.
-4) SMC Ultra/MCA and IBM Adapter/A
+3) SMC Ultra/MCA and IBM Adapter/A
drivers/net/smc-mca.c
drivers/net/smc-mca.h
Driver for the MCA version of the SMC Ultra and various other
OEM'ed and work-alike cards (Elite, Adapter/A, etc).
-5) NE/2
+4) NE/2
driver/net/ne2.c
driver/net/ne2.h
The NE/2 is the MCA version of the NE2000. This may not work
with clones that have a different adapter id than the original
NE/2.
-6) Future Domain MCS-600/700, OEM'd IBM Fast SCSI Adapter/A and
+5) Future Domain MCS-600/700, OEM'd IBM Fast SCSI Adapter/A and
Reply Sound Blaster/SCSI (SCSI part)
Better support for these cards than the driver for ISA.
Supports multiple cards with IRQ sharing.
diff --git a/Documentation/nmi_watchdog.txt b/Documentation/nmi_watchdog.txt
index c025a4561c1..757c729ee42 100644
--- a/Documentation/nmi_watchdog.txt
+++ b/Documentation/nmi_watchdog.txt
@@ -23,8 +23,7 @@ kernel debugging options, such as Kernel Stack Meter or Kernel Tracer,
may implicitly disable the NMI watchdog.]
For x86-64, the needed APIC is always compiled in, and the NMI watchdog is
-always enabled with I/O-APIC mode (nmi_watchdog=1). Currently, local APIC
-mode (nmi_watchdog=2) does not work on x86-64.
+always enabled with I/O-APIC mode (nmi_watchdog=1).
Using local APIC (nmi_watchdog=2) needs the first performance register, so
you can't use it for other purposes (such as high precision performance
diff --git a/Documentation/unaligned-memory-access.txt b/Documentation/unaligned-memory-access.txt
index 6223eace3c0..b0472ac5226 100644
--- a/Documentation/unaligned-memory-access.txt
+++ b/Documentation/unaligned-memory-access.txt
@@ -57,7 +57,7 @@ here; a summary of the common scenarios is presented below:
unaligned access to be corrected.
- Some architectures are not capable of unaligned memory access, but will
silently perform a different memory access to the one that was requested,
- resulting a a subtle code bug that is hard to detect!
+ resulting in a subtle code bug that is hard to detect!
It should be obvious from the above that if your code causes unaligned
memory accesses to happen, your code will not work correctly on certain
@@ -209,7 +209,7 @@ memory and you wish to avoid unaligned access, its usage is as follows:
u32 value = get_unaligned((u32 *) data);
-These macros work work for memory accesses of any length (not just 32 bits as
+These macros work for memory accesses of any length (not just 32 bits as
in the examples above). Be aware that when compared to standard access of
aligned memory, using these macros to access unaligned memory can be costly in
terms of performance.
diff --git a/MAINTAINERS b/MAINTAINERS
index fc7365cdc8d..c6ade7e777f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -163,6 +163,12 @@ M: A2232@gmx.net
L: linux-m68k@lists.linux-m68k.org
S: Maintained
+AFS FILESYSTEM & AF_RXRPC SOCKET DOMAIN
+P: David Howells
+M: dhowells@redhat.com
+L: linux-afs@lists.infradead.org
+S: Supported
+
AIO
P: Benjamin LaHaise
M: bcrl@kvack.org
@@ -452,7 +458,7 @@ S: Maintained
ARM/ATMEL AT91RM9200 ARM ARCHITECTURE
P: Andrew Victor
-M: andrew@sanpeople.com
+M: linux@maxim.org.za
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://maxim.org.za/at91_26.html
S: Maintained
@@ -2305,14 +2311,14 @@ L: kexec@lists.infradead.org
S: Maintained
KPROBES
-P: Prasanna S Panchamukhi
-M: prasanna@in.ibm.com
P: Ananth N Mavinakayanahalli
M: ananth@in.ibm.com
P: Anil S Keshavamurthy
M: anil.s.keshavamurthy@intel.com
P: David S. Miller
M: davem@davemloft.net
+P: Masami Hiramatsu
+M: mhiramat@redhat.com
L: linux-kernel@vger.kernel.org
S: Maintained
@@ -2926,9 +2932,9 @@ S: Maintained
ORACLE CLUSTER FILESYSTEM 2 (OCFS2)
P: Mark Fasheh
-M: mark.fasheh@oracle.com
-P: Kurt Hackel
-M: kurt.hackel@oracle.com
+M: mfasheh@suse.com
+P: Joel Becker
+M: joel.becker@oracle.com
L: ocfs2-devel@oss.oracle.com
W: http://oss.oracle.com/projects/ocfs2/
S: Supported
diff --git a/Makefile b/Makefile
index 7a4d34b91e0..fec2a12710e 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 25
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc8
NAME = Funky Weasel is Jiggy wit it
# *DOCUMENTATION*
@@ -189,7 +189,7 @@ SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
# Alternatively CROSS_COMPILE can be set in the environment.
# Default value for CROSS_COMPILE is not to prefix executables
# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
-
+export KBUILD_BUILDHOST := $(SUBARCH)
ARCH ?= $(SUBARCH)
CROSS_COMPILE ?=
diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c
index 4e1c08636ed..dd6e334ab9e 100644
--- a/arch/alpha/kernel/pci_iommu.c
+++ b/arch/alpha/kernel/pci_iommu.c
@@ -424,11 +424,13 @@ EXPORT_SYMBOL(pci_unmap_page);
else DMA_ADDRP is undefined. */
void *
-pci_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp)
+__pci_alloc_consistent(struct pci_dev *pdev, size_t size,
+ dma_addr_t *dma_addrp, gfp_t gfp)
{
void *cpu_addr;
long order = get_order(size);
- gfp_t gfp = GFP_ATOMIC;
+
+ gfp &= ~GFP_DMA;
try_again:
cpu_addr = (void *)__get_free_pages(gfp, order);
@@ -458,7 +460,7 @@ try_again:
return cpu_addr;
}
-EXPORT_SYMBOL(pci_alloc_consistent);
+EXPORT_SYMBOL(__pci_alloc_consistent);
/* Free and unmap a consistent DMA buffer. CPU_ADDR and DMA_ADDR must
be values that were returned from pci_alloc_consistent. SIZE must
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 955fc53c1c0..4039a133006 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -469,6 +469,7 @@ config ARCH_OMAP
bool "TI OMAP"
select GENERIC_GPIO
select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
help
Support for TI's OMAP platform (OMAP1 and OMAP2).
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index 53826224148..5fe9588db07 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -120,6 +120,7 @@ void it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
time, when they all three were 0. */
bits_pd = __raw_readl(IT8152_INTC_PDCNIRR);
bits_lp = __raw_readl(IT8152_INTC_LPCNIRR);
+ bits_ld = __raw_readl(IT8152_INTC_LDCNIRR);
if (!(bits_ld | bits_lp | bits_pd))
return;
}
@@ -133,14 +134,14 @@ void it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
bits_lp &= ((1 << IT8152_LP_IRQ_COUNT) - 1);
while (bits_lp) {
- i = __ffs(bits_pd);
+ i = __ffs(bits_lp);
it8152_irq(IT8152_LP_IRQ(i));
bits_lp &= ~(1 << i);
}
bits_ld &= ((1 << IT8152_LD_IRQ_COUNT) - 1);
while (bits_ld) {
- i = __ffs(bits_pd);
+ i = __ffs(bits_ld);
it8152_irq(IT8152_LD_IRQ(i));
bits_ld &= ~(1 << i);
}
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index 283e14fff99..7e97b737656 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -336,7 +336,7 @@
CALL(sys_mknodat)
/* 325 */ CALL(sys_fchownat)
CALL(sys_futimesat)
- CALL(sys_fstatat64)
+ CALL(ABI(sys_fstatat64, sys_oabi_fstatat64))
CALL(sys_unlinkat)
CALL(sys_renameat)
/* 330 */ CALL(sys_linkat)
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 54cdf1aeefc..ef2f86a5e78 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -26,8 +26,8 @@
/*
* For ARM syscalls, we encode the syscall number into the instruction.
*/
-#define SWI_SYS_SIGRETURN (0xef000000|(__NR_sigreturn))
-#define SWI_SYS_RT_SIGRETURN (0xef000000|(__NR_rt_sigreturn))
+#define SWI_SYS_SIGRETURN (0xef000000|(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE))
+#define SWI_SYS_RT_SIGRETURN (0xef000000|(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE))
/*
* With EABI, the syscall number has to be loaded into r7.
diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c
index e8b98046895..96ab5f52949 100644
--- a/arch/arm/kernel/sys_oabi-compat.c
+++ b/arch/arm/kernel/sys_oabi-compat.c
@@ -25,6 +25,7 @@
* sys_stat64:
* sys_lstat64:
* sys_fstat64:
+ * sys_fstatat64:
*
* struct stat64 has different sizes and some members are shifted
* Compatibility wrappers are needed for them and provided below.
@@ -169,6 +170,29 @@ asmlinkage long sys_oabi_fstat64(unsigned long fd,
return error;
}
+asmlinkage long sys_oabi_fstatat64(int dfd,
+ char __user *filename,
+ struct oldabi_stat64 __user *statbuf,
+ int flag)
+{
+ struct kstat stat;
+ int error = -EINVAL;
+
+ if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
+ goto out;
+
+ if (flag & AT_SYMLINK_NOFOLLOW)
+ error = vfs_lstat_fd(dfd, filename, &stat);
+ else
+ error = vfs_stat_fd(dfd, filename, &stat);
+
+ if (!error)
+ error = cp_oldabi_stat64(&stat, statbuf);
+
+out:
+ return error;
+}
+
struct oabi_flock64 {
short l_type;
short l_whence;
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index 74c65ce221d..d2a7b04f1cb 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -14,8 +14,10 @@
#include <linux/mm.h>
#include <linux/init.h>
+#include <linux/f75375s.h>
#include <linux/kernel.h>
#include <linux/pci.h>
+#include <linux/pm.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/serial_core.h>
@@ -167,11 +169,21 @@ static struct platform_device glantank_serial_device = {
.resource = &glantank_uart_resource,
};
+static struct f75375s_platform_data glantank_f75375s = {
+ .pwm = { 255, 255 },
+ .pwm_enable = { 0, 0 },
+};
+
static struct i2c_board_info __initdata glantank_i2c_devices[] = {
{
I2C_BOARD_INFO("rtc-rs5c372", 0x32),
.type = "rs5c372a",
},
+ {
+ I2C_BOARD_INFO("f75375", 0x2e),
+ .type = "f75375",
+ .platform_data = &glantank_f75375s,
+ },
};
static void glantank_power_off(void)
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 237651ebae5..a4f8b205543 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -132,13 +132,20 @@ static inline void omap_mpu_timer_start(int nr, unsigned long load_val,
timer->cntl = timerflags;
}
+static inline void omap_mpu_timer_stop(int nr)
+{
+ volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
+
+ timer->cntl &= ~MPU_TIMER_ST;
+}
+
/*
* ---------------------------------------------------------------------------
* MPU timer 1 ... count down to zero, interrupt, reload
* ---------------------------------------------------------------------------
*/
static int omap_mpu_set_next_event(unsigned long cycles,
- struct clock_event_device *evt)
+ struct clock_event_device *evt)
{
omap_mpu_timer_start(0, cycles, 0);
return 0;
@@ -152,6 +159,7 @@ static void omap_mpu_set_mode(enum clock_event_mode mode,
omap_mpu_set_autoreset(0);
break;
case CLOCK_EVT_MODE_ONESHOT:
+ omap_mpu_timer_stop(0);
omap_mpu_remove_autoreset(0);
break;
case CLOCK_EVT_MODE_UNUSED:
@@ -163,7 +171,7 @@ static void omap_mpu_set_mode(enum clock_event_mode mode,
static struct clock_event_device clockevent_mpu_timer1 = {
.name = "mpu_timer1",
- .features = CLOCK_EVT_FEAT_PERIODIC, CLOCK_EVT_FEAT_ONESHOT,
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.shift = 32,
.set_next_event = omap_mpu_set_next_event,
.set_mode = omap_mpu_set_mode,
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index c156ddab9a2..016690b9d56 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -114,6 +114,10 @@ clean_addr: .word CLEAN_ADDR
* Nothing too exciting at the moment
*/
ENTRY(cpu_xscale_proc_init)
+ @ enable write buffer coalescing. Some bootloader disable it
+ mrc p15, 0, r1, c1, c0, 1
+ bic r1, r1, #1
+ mcr p15, 0, r1, c1, c0, 1
mov pc, lr
/*
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index c1f7e5a819a..b917206ee90 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -11,7 +11,6 @@ choice
config ARCH_OMAP1
bool "TI OMAP1"
- select GENERIC_CLOCKEVENTS
config ARCH_OMAP2
bool "TI OMAP2"
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index ce17df31b84..8f56c255d1e 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -14,9 +14,14 @@ obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o
# OCPI interconnect support for 1710, 1610 and 5912
obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
+obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
obj-$(CONFIG_CPU_FREQ) += cpu-omap.o
obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
obj-$(CONFIG_I2C_OMAP) += i2c.o
+
+# OMAP mailbox framework
+obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o
+
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 91004a3c479..793740686be 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -1020,12 +1020,12 @@ static void create_dma_lch_chain(int lch_head, int lch_queue)
}
w = OMAP_DMA_CLNK_CTRL_REG(lch_head);
- w &= ~(0x0f);
+ w &= ~(0x1f);
w |= lch_queue;
OMAP_DMA_CLNK_CTRL_REG(lch_head) = w;
w = OMAP_DMA_CLNK_CTRL_REG(lch_queue);
- w &= ~(0x0f);
+ w &= ~(0x1f);
w |= (dma_chan[lch_queue].next_linked_ch);
OMAP_DMA_CLNK_CTRL_REG(lch_queue) = w;
}
@@ -1248,7 +1248,7 @@ EXPORT_SYMBOL(omap_dma_chain_status);
* @param frame_count
* @param callbk_data - channel callback parameter data.
*
- * @return - Success : start_dma status
+ * @return - Success : 0
* Failure: -EINVAL/-EBUSY
*/
int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
@@ -1367,7 +1367,7 @@ int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
}
}
- return start_dma;
+ return 0;
}
EXPORT_SYMBOL(omap_dma_chain_a_transfer);
@@ -1663,6 +1663,7 @@ static int omap2_dma_handle_ch(int ch)
if (!status) {
if (printk_ratelimit())
printk(KERN_WARNING "Spurious DMA IRQ for lch %d\n", ch);
+ omap_writel(1 << ch, OMAP_DMA4_IRQSTATUS_L0);
return 0;
}
if (unlikely(dma_chan[ch].dev_id == -1)) {
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 66a1455595f..8c78e4e57b5 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -1134,10 +1134,9 @@ static void gpio_mask_irq(unsigned int irq)
static void gpio_unmask_irq(unsigned int irq)
{
unsigned int gpio = irq - IH_GPIO_BASE;
- unsigned int gpio_idx = get_gpio_index(gpio);
struct gpio_bank *bank = get_irq_chip_data(irq);
- _set_gpio_irqenable(bank, gpio_idx, 1);
+ _set_gpio_irqenable(bank, gpio, 1);
}
static struct irq_chip gpio_irq_chip = {
diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c
index e66a07a928c..2687b730e2d 100644
--- a/arch/avr32/kernel/setup.c
+++ b/arch/avr32/kernel/setup.c
@@ -163,6 +163,7 @@ add_reserved_region(resource_size_t start, resource_size_t end,
new->start = start;
new->end = end;
new->name = name;
+ new->sibling = next;
new->flags = IORESOURCE_MEM;
*pprev = new;
diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c
index cf6f686d9b0..b835c4c0136 100644
--- a/arch/avr32/kernel/traps.c
+++ b/arch/avr32/kernel/traps.c
@@ -178,6 +178,7 @@ static int do_cop_absent(u32 insn)
return 0;
}
+#ifdef CONFIG_BUG
int is_valid_bugaddr(unsigned long pc)
{
unsigned short opcode;
@@ -189,6 +190,7 @@ int is_valid_bugaddr(unsigned long pc)
return opcode == AVR32_BUG_OPCODE;
}
+#endif
asmlinkage void do_illegal_opcode(unsigned long ecr, struct pt_regs *regs)
{
@@ -197,6 +199,7 @@ asmlinkage void do_illegal_opcode(unsigned long ecr, struct pt_regs *regs)
void __user *pc;
long code;
+#ifdef CONFIG_BUG
if (!user_mode(regs) && (ecr == ECR_ILLEGAL_OPCODE)) {
enum bug_trap_type type;
@@ -211,6 +214,7 @@ asmlinkage void do_illegal_opcode(unsigned long ecr, struct pt_regs *regs)
die("Kernel BUG", regs, SIGKILL);
}
}
+#endif
local_irq_enable();
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 72097dacabd..1c62381f5c2 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -482,10 +482,13 @@ endif
# be 16kb aligned or the handling of the current variable will break.
# Simplified: what IP22 does at 128MB+ in ksegN, IP28 does at 512MB+ in xkphys
#
-#core-$(CONFIG_SGI_IP28) += arch/mips/sgi-ip22/ arch/mips/arc/arc_con.o
+ifdef CONFIG_SGI_IP28
+ ifeq ($(call cc-option-yn,-mr10k-cache-barrier=1), n)
+ $(error gcc doesn't support needed option -mr10k-cache-barrier=1)
+ endif
+endif
core-$(CONFIG_SGI_IP28) += arch/mips/sgi-ip22/
cflags-$(CONFIG_SGI_IP28) += -mr10k-cache-barrier=1 -Iinclude/asm-mips/mach-ip28
-#cflags-$(CONFIG_SGI_IP28) += -Iinclude/asm-mips/mach-ip28
load-$(CONFIG_SGI_IP28) += 0xa800000020004000
#
diff --git a/arch/mips/au1000/common/cputable.c b/arch/mips/au1000/common/cputable.c
index d8df5fdb045..5c0d35d6e22 100644
--- a/arch/mips/au1000/common/cputable.c
+++ b/arch/mips/au1000/common/cputable.c
@@ -22,24 +22,24 @@ struct cpu_spec* cur_cpu_spec[NR_CPUS];
/* With some thought, we can probably use the mask to reduce the
* size of the table.
*/
-struct cpu_spec cpu_specs[] = {
- { 0xffffffff, 0x00030100, "Au1000 DA", 1, 0 },
- { 0xffffffff, 0x00030201, "Au1000 HA", 1, 0 },
- { 0xffffffff, 0x00030202, "Au1000 HB", 1, 0 },
- { 0xffffffff, 0x00030203, "Au1000 HC", 1, 1 },
- { 0xffffffff, 0x00030204, "Au1000 HD", 1, 1 },
- { 0xffffffff, 0x01030200, "Au1500 AB", 1, 1 },
- { 0xffffffff, 0x01030201, "Au1500 AC", 0, 1 },
- { 0xffffffff, 0x01030202, "Au1500 AD", 0, 1 },
- { 0xffffffff, 0x02030200, "Au1100 AB", 1, 1 },
- { 0xffffffff, 0x02030201, "Au1100 BA", 1, 1 },
- { 0xffffffff, 0x02030202, "Au1100 BC", 1, 1 },
- { 0xffffffff, 0x02030203, "Au1100 BD", 0, 1 },
- { 0xffffffff, 0x02030204, "Au1100 BE", 0, 1 },
- { 0xffffffff, 0x03030200, "Au1550 AA", 0, 1 },
- { 0xffffffff, 0x04030200, "Au1200 AB", 0, 0 },
- { 0xffffffff, 0x04030201, "Au1200 AC", 1, 0 },
- { 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0 },
+struct cpu_spec cpu_specs[] = {
+ { 0xffffffff, 0x00030100, "Au1000 DA", 1, 0, 1 },
+ { 0xffffffff, 0x00030201, "Au1000 HA", 1, 0, 1 },
+ { 0xffffffff, 0x00030202, "Au1000 HB", 1, 0, 1 },
+ { 0xffffffff, 0x00030203, "Au1000 HC", 1, 1, 0 },
+ { 0xffffffff, 0x00030204, "Au1000 HD", 1, 1, 0 },
+ { 0xffffffff, 0x01030200, "Au1500 AB", 1, 1, 0 },
+ { 0xffffffff, 0x01030201, "Au1500 AC", 0, 1, 0 },
+ { 0xffffffff, 0x01030202, "Au1500 AD", 0, 1, 0 },
+ { 0xffffffff, 0x02030200, "Au1100 AB", 1, 1, 0 },
+ { 0xffffffff, 0x02030201, "Au1100 BA", 1, 1, 0 },
+ { 0xffffffff, 0x02030202, "Au1100 BC", 1, 1, 0 },
+ { 0xffffffff, 0x02030203, "Au1100 BD", 0, 1, 0 },
+ { 0xffffffff, 0x02030204, "Au1100 BE", 0, 1, 0 },
+ { 0xffffffff, 0x03030200, "Au1550 AA", 0, 1, 0 },
+ { 0xffffffff, 0x04030200, "Au1200 AB", 0, 0, 0 },
+ { 0xffffffff, 0x04030201, "Au1200 AC", 1, 0, 0 },
+ { 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0, 0 }
};
void
diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c
index d885e3848ec..9e4ab80caab 100644
--- a/arch/mips/au1000/common/setup.c
+++ b/arch/mips/au1000/common/setup.c
@@ -57,7 +57,7 @@ void __init plat_mem_setup(void)
{
struct cpu_spec *sp;
char *argptr;
- unsigned long prid, cpupll, bclk = 1;
+ unsigned long prid, cpufreq, bclk = 1;
set_cpuspec();
sp = cur_cpu_spec[0];
@@ -65,8 +65,15 @@ void __init plat_mem_setup(void)
board_setup(); /* board specific setup */
prid = read_c0_prid();
- cpupll = (au_readl(0xB1900060) & 0x3F) * 12;
- printk("(PRId %08lx) @ %ldMHZ\n", prid, cpupll);
+ if (sp->cpu_pll_wo)
+#ifdef CONFIG_SOC_AU1000_FREQUENCY
+ cpufreq = CONFIG_SOC_AU1000_FREQUENCY / 1000000;
+#else
+ cpufreq = 396;
+#endif
+ else
+ cpufreq = (au_readl(SYS_CPUPLL) & 0x3F) * 12;
+ printk(KERN_INFO "(PRID %08lx) @ %ld MHz\n", prid, cpufreq);
bclk = sp->cpu_bclk;
if (bclk)
diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c
index f113b512d7b..e122bbc6cd8 100644
--- a/arch/mips/au1000/common/time.c
+++ b/arch/mips/au1000/common/time.c
@@ -209,18 +209,22 @@ unsigned long cal_r4koff(void)
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S);
au_writel(0, SYS_TOYWRITE);
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S);
+ } else
+ no_au1xxx_32khz = 1;
- cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) *
- AU1000_SRC_CLK;
- }
- else {
- /* The 32KHz oscillator isn't running, so assume there
- * isn't one and grab the processor speed from the PLL.
- * NOTE: some old silicon doesn't allow reading the PLL.
- */
+ /*
+ * On early Au1000, sys_cpupll was write-only. Since these
+ * silicon versions of Au1000 are not sold by AMD, we don't bend
+ * over backwards trying to determine the frequency.
+ */
+ if (cur_cpu_spec[0]->cpu_pll_wo)
+#ifdef CONFIG_SOC_AU1000_FREQUENCY
+ cpu_speed = CONFIG_SOC_AU1000_FREQUENCY;
+#else
+ cpu_speed = 396000000;
+#endif
+ else
cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK;
- no_au1xxx_32khz = 1;
- }
mips_hpt_frequency = cpu_speed;
// Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16)
set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16));
diff --git a/arch/mips/au1000/xxs1500/board_setup.c b/arch/mips/au1000/xxs1500/board_setup.c
index a9237f41933..b2e413e597a 100644
--- a/arch/mips/au1000/xxs1500/board_setup.c
+++ b/arch/mips/au1000/xxs1500/board_setup.c
@@ -33,11 +33,10 @@
#include <asm/cpu.h>
#include <asm/bootinfo.h>
#include <asm/irq.h>
-#include <asm/keyboard.h>
#include <asm/mipsregs.h>
#include <asm/reboot.h>
#include <asm/pgtable.h>
-#include <asm/au1000.h>
+#include <asm/mach-au1x00/au1000.h>
void board_reset(void)
{
diff --git a/arch/mips/au1000/xxs1500/irqmap.c b/arch/mips/au1000/xxs1500/irqmap.c
index 389349295d7..a343da13433 100644
--- a/arch/mips/au1000/xxs1500/irqmap.c
+++ b/arch/mips/au1000/xxs1500/irqmap.c
@@ -45,7 +45,7 @@
#include <asm/io.h>
#include <asm/mipsregs.h>
#include <asm/system.h>
-#include <asm/au1000.h>
+#include <asm/mach-au1x00/au1000.h>
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
index abf70d74e9d..3b42cea2e40 100644
--- a/arch/mips/configs/bigsur_defconfig
+++ b/arch/mips/configs/bigsur_defconfig
@@ -1,58 +1,48 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:22 2007
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 08:11:19 2008
#
CONFIG_MIPS=y
#
# Machine selection
#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
-CONFIG_SIBYTE_BIGSUR=y
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+CONFIG_SIBYTE_BIGSUR=y
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_WR_PPMC is not set
CONFIG_SIBYTE_BCM1x80=y
CONFIG_SIBYTE_SB1xxx_SOC=y
# CONFIG_CPU_SB1_PASS_1 is not set
@@ -68,9 +58,11 @@ CONFIG_SIBYTE_CFE=y
# CONFIG_SIBYTE_CFE_CONSOLE is not set
# CONFIG_SIBYTE_BUS_WATCHER is not set
# CONFIG_SIBYTE_TBPROF is not set
+CONFIG_SIBYTE_HAS_ZBUS_PROFILING=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
@@ -81,11 +73,17 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
CONFIG_CEVT_BCM1480=y
CONFIG_CSRC_BCM1480=y
+CONFIG_CFE=y
CONFIG_DMA_COHERENT=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
CONFIG_SWAP_IO_SPACE=y
CONFIG_BOOT_ELF32=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -93,10 +91,6 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_CPU_LOONGSON2 is not set
# CONFIG_CPU_MIPS32_R1 is not set
# CONFIG_CPU_MIPS32_R2 is not set
@@ -137,14 +131,15 @@ CONFIG_PAGE_SIZE_4KB=y
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_IRQ_PER_CPU=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -152,13 +147,19 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
CONFIG_SMP=y
CONFIG_SYS_SUPPORTS_SMP=y
CONFIG_NR_CPUS_DEFAULT_4=y
CONFIG_NR_CPUS=4
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
@@ -171,38 +172,45 @@ CONFIG_HZ=1000
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
# CONFIG_KEXEC is not set
+CONFIG_SECCOMP=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
-# CONFIG_CPUSETS is not set
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
@@ -211,24 +219,33 @@ CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
@@ -236,12 +253,10 @@ CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
@@ -255,6 +270,7 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -262,23 +278,19 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
CONFIG_PCI_DEBUG=y
CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# PCI Hotplug Support
-#
+CONFIG_ZONE_DMA32=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-# CONFIG_BUILD_ELF64 is not set
CONFIG_MIPS32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
@@ -292,7 +304,6 @@ CONFIG_BINFMT_ELF32=y
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
#
# Networking
@@ -302,7 +313,6 @@ CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -310,10 +320,11 @@ CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
@@ -322,41 +333,141 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_ADVANCED is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -369,10 +480,6 @@ CONFIG_NETWORK_SECMARK=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -380,9 +487,21 @@ CONFIG_NETWORK_SECMARK=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
@@ -391,85 +510,70 @@ CONFIG_NETWORK_SECMARK=y
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_SGI_IOC4=m
# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=y
CONFIG_BLK_DEV_IDEFLOPPY=y
+# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
+CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_PCI_AUTO is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
@@ -495,87 +599,196 @@ CONFIG_BLK_DEV_IT8213=m
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_TC86C001=m
# CONFIG_BLK_DEV_IDE_SWARM is not set
-# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_IDEDMA_AUTO is not set
+CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+CONFIG_SATA_SIL24=y
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+CONFIG_PATA_SIL680=y
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_AX88796 is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -585,52 +798,53 @@ CONFIG_SB1250_MAC=y
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3=m
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
@@ -660,17 +874,16 @@ CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
-CONFIG_MOXA_SMARTIO_NEW=m
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
-CONFIG_SERIAL_SB1250_DUART=y
-CONFIG_SERIAL_SB1250_DUART_CONSOLE=y
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -680,39 +893,24 @@ CONFIG_SERIAL_SB1250_DUART_CONSOLE=y
#
# Non-8250 serial port support
#
+CONFIG_SERIAL_SB1250_DUART=y
+CONFIG_SERIAL_SB1250_DUART_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
@@ -736,29 +934,30 @@ CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PASEMI is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
CONFIG_I2C_SIBYTE=y
+# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
-CONFIG_SENSORS_DS1337=y
-CONFIG_SENSORS_DS1374=y
+# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=y
CONFIG_SENSORS_PCF8574=y
-CONFIG_SENSORS_PCA9539=y
+# CONFIG_PCF8575 is not set
CONFIG_SENSORS_PCF8591=y
+# CONFIG_TPS65010 is not set
CONFIG_SENSORS_MAX6875=y
+# CONFIG_SENSORS_TSL2550 is not set
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
@@ -769,43 +968,49 @@ CONFIG_I2C_DEBUG_CHIP=y
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
#
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
#
-# CONFIG_W1 is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
-# Hardware Monitoring support
+# Multifunction device drivers
#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Sound
+# Display device support
#
-# CONFIG_SOUND is not set
+# CONFIG_DISPLAY_SUPPORT is not set
#
-# USB support
+# Sound
#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
@@ -814,104 +1019,73 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
+# Userspace I/O
#
+# CONFIG_UIO is not set
#
# File systems
#
-CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=m
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
#
# Pseudo filesystems
@@ -923,7 +1097,6 @@ CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
@@ -939,14 +1112,13 @@ CONFIG_CONFIGFS_FS=m
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
@@ -958,6 +1130,7 @@ CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -965,37 +1138,61 @@ CONFIG_SUNRPC=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
# CONFIG_DLM_DEBUG is not set
#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
@@ -1003,8 +1200,8 @@ CONFIG_MAGIC_SYSRQ=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
@@ -1014,15 +1211,19 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_CROSSCOMPILE=y
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
CONFIG_CMDLINE=""
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_SB1XXX_CORELIS is not set
@@ -1034,23 +1235,22 @@ CONFIG_CMDLINE=""
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_GF128MUL=m
@@ -1058,39 +1258,50 @@ CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_CRC32C is not set
CONFIG_CRYPTO_CAMELLIA=m
# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
+CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c
index fc4aa07b6d3..38fa1a194bf 100644
--- a/arch/mips/kernel/i8253.c
+++ b/arch/mips/kernel/i8253.c
@@ -15,6 +15,7 @@
#include <asm/time.h>
DEFINE_SPINLOCK(i8253_lock);
+EXPORT_SYMBOL(i8253_lock);
/*
* Initialize the PIT timer.
diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
index 9f85d4cecc5..b45a7093ca2 100644
--- a/arch/mips/kernel/time.c
+++ b/arch/mips/kernel/time.c
@@ -157,6 +157,6 @@ void __init time_init(void)
{
plat_time_init();
- if (mips_clockevent_init() || !cpu_has_mfc0_count_bug())
+ if (!mips_clockevent_init() || !cpu_has_mfc0_count_bug())
init_mips_clocksource();
}
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index eed2dc4273e..39804c584ed 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -262,13 +262,21 @@ void dump_mtregs(void)
/* Find some VPE program space */
static void *alloc_progmem(unsigned long len)
{
+ void *addr;
+
#ifdef CONFIG_MIPS_VPE_LOADER_TOM
- /* this means you must tell linux to use less memory than you physically have */
- return pfn_to_kaddr(max_pfn);
+ /*
+ * This means you must tell Linux to use less memory than you
+ * physically have, for example by passing a mem= boot argument.
+ */
+ addr = pfn_to_kaddr(max_pfn);
+ memset(addr, 0, len);
#else
- // simple grab some mem for now
- return kmalloc(len, GFP_KERNEL);
+ /* simple grab some mem for now */
+ addr = kzalloc(len, GFP_KERNEL);
#endif
+
+ return addr;
}
static void release_progmem(void *ptr)
@@ -884,9 +892,10 @@ static int vpe_elfload(struct vpe * v)
}
v->load_addr = alloc_progmem(mod.core_size);
- memset(v->load_addr, 0, mod.core_size);
+ if (!v->load_addr)
+ return -ENOMEM;
- printk("VPE loader: loading to %p\n", v->load_addr);
+ pr_info("VPE loader: loading to %p\n", v->load_addr);
if (relocate) {
for (i = 0; i < hdr->e_shnum; i++) {
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 3a93d4ce270..382738ca8a0 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -307,6 +307,7 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l,
case CPU_R12000:
case CPU_R14000:
case CPU_4KC:
+ case CPU_4KEC:
case CPU_SB1:
case CPU_SB1A:
case CPU_4KSC:
diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c
index ab68c4318a3..87e2c8f54e2 100644
--- a/arch/mips/pci/pci-bcm1480.c
+++ b/arch/mips/pci/pci-bcm1480.c
@@ -185,8 +185,8 @@ static struct resource bcm1480_mem_resource = {
static struct resource bcm1480_io_resource = {
.name = "BCM1480 PCI I/O",
- .start = 0x2c000000UL,
- .end = 0x2dffffffUL,
+ .start = A_BCM1480_PHYS_PCI_IO_MATCH_BYTES,
+ .end = A_BCM1480_PHYS_PCI_IO_MATCH_BYTES + 0x1ffffffUL,
.flags = IORESOURCE_IO,
};
@@ -194,6 +194,7 @@ struct pci_controller bcm1480_controller = {
.pci_ops = &bcm1480_pci_ops,
.mem_resource = &bcm1480_mem_resource,
.io_resource = &bcm1480_io_resource,
+ .io_offset = A_BCM1480_PHYS_PCI_IO_MATCH_BYTES,
};
@@ -251,6 +252,7 @@ static int __init bcm1480_pcibios_init(void)
bcm1480_controller.io_map_base = (unsigned long)
ioremap(A_BCM1480_PHYS_PCI_IO_MATCH_BYTES, 65536);
+ bcm1480_controller.io_map_base -= bcm1480_controller.io_offset;
set_io_port_base(bcm1480_controller.io_map_base);
isa_slot_offset = (unsigned long)
ioremap(A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES, 1024*1024);
diff --git a/arch/mips/pci/pci-bcm1480ht.c b/arch/mips/pci/pci-bcm1480ht.c
index 005e7fecab0..f54f45412b0 100644
--- a/arch/mips/pci/pci-bcm1480ht.c
+++ b/arch/mips/pci/pci-bcm1480ht.c
@@ -180,8 +180,8 @@ static struct resource bcm1480ht_mem_resource = {
static struct resource bcm1480ht_io_resource = {
.name = "BCM1480 HT I/O",
- .start = 0x00000000UL,
- .end = 0x01ffffffUL,
+ .start = A_BCM1480_PHYS_HT_IO_MATCH_BYTES,
+ .end = A_BCM1480_PHYS_HT_IO_MATCH_BYTES + 0x01ffffffUL,
.flags = IORESOURCE_IO,
};
@@ -191,29 +191,22 @@ struct pci_controller bcm1480ht_controller = {
.io_resource = &bcm1480ht_io_resource,
.index = 1,
.get_busno = bcm1480ht_pcibios_get_busno,
+ .io_offset = A_BCM1480_PHYS_HT_IO_MATCH_BYTES,
};
static int __init bcm1480ht_pcibios_init(void)
{
- uint32_t cmdreg;
-
ht_cfg_space = ioremap(A_BCM1480_PHYS_HT_CFG_MATCH_BITS, 16*1024*1024);
- /*
- * See if the PCI bus has been configured by the firmware.
- */
- cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0),
- PCI_COMMAND));
- if (!(cmdreg & PCI_COMMAND_MASTER)) {
- printk("HT: Skipping HT probe. Bus is not initialized.\n");
- iounmap(ht_cfg_space);
- return 1; /* XXX */
- }
+ /* CFE doesn't always init all HT paths, so we always scan */
bcm1480ht_bus_status |= PCI_BUS_ENABLED;
ht_eoi_space = (unsigned long)
ioremap(A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES,
4 * 1024 * 1024);
+ bcm1480ht_controller.io_map_base = (unsigned long)
+ ioremap(A_BCM1480_PHYS_HT_IO_MATCH_BYTES, 65536);
+ bcm1480ht_controller.io_map_base -= bcm1480ht_controller.io_offset;
register_pci_controller(&bcm1480ht_controller);
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 4974d9e56ea..1aded8f759d 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -253,8 +253,8 @@ image-$(CONFIG_TQM8540) += cuImage.tqm8540
image-$(CONFIG_TQM8541) += cuImage.tqm8541
image-$(CONFIG_TQM8555) += cuImage.tqm8555
image-$(CONFIG_TQM8560) += cuImage.tqm8560
-image-$(CONFIG_SBC8548) += cuImage.tqm8548
-image-$(CONFIG_SBC8560) += cuImage.tqm8560
+image-$(CONFIG_SBC8548) += cuImage.sbc8548
+image-$(CONFIG_SBC8560) += cuImage.sbc8560
# Board ports in arch/powerpc/platform/embedded6xx/Kconfig
image-$(CONFIG_STORCENTER) += cuImage.storcenter
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index 571ba02acca..2e9bc397ae9 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -270,7 +270,7 @@
mdio@3000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,mpc5200b-mdio";
+ compatible = "fsl,mpc5200b-mdio", "fsl,mpc5200-mdio";
reg = <3000 400>; // fec range, since we need to setup fec interrupts
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
interrupt-parent = <&mpc5200_pic>;
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index d50e498a072..8f8b8494d62 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -174,10 +174,10 @@ cuboot*)
*-mpc83*)
platformo=$object/cuboot-83xx.o
;;
- *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555*)
+ *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555)
platformo=$object/cuboot-85xx-cpm2.o
;;
- *-mpc85*)
+ *-mpc85*|*-tqm8540|*-sbc85*)
platformo=$object/cuboot-85xx.o
;;
esac
diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig
index f3bde8c6c8c..c420e47426f 100644
--- a/arch/powerpc/configs/cell_defconfig
+++ b/arch/powerpc/configs/cell_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:05 2007
+# Linux kernel version: 2.6.25-rc6
+# Thu Mar 20 10:31:04 2008
#
CONFIG_PPC64=y
@@ -28,6 +28,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -69,8 +70,6 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
@@ -79,13 +78,20 @@ CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_NS is not set
CONFIG_CPUSETS=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_USER_SCHED is not set
+# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUP_CPUACCT is not set
+# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_PROC_PID_CPUSET=y
# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -99,11 +105,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -111,6 +119,15 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -138,6 +155,7 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
@@ -148,8 +166,8 @@ CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_PPC_86xx is not set
# CONFIG_PPC_PSERIES is not set
# CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_PASEMI is not set
@@ -162,14 +180,14 @@ CONFIG_PPC_PS3=y
# CONFIG_PS3_ADVANCED is not set
CONFIG_PS3_HTAB_SIZE=20
# CONFIG_PS3_DYNAMIC_DMA is not set
-CONFIG_PS3_USE_LPAR_ADDR=y
CONFIG_PS3_VUART=y
CONFIG_PS3_PS3AV=y
-CONFIG_PS3_SYS_MANAGER=m
+CONFIG_PS3_SYS_MANAGER=y
CONFIG_PS3_STORAGE=y
CONFIG_PS3_DISK=y
CONFIG_PS3_ROM=m
CONFIG_PS3_FLASH=m
+CONFIG_PS3_LPM=m
CONFIG_PPC_CELL=y
CONFIG_PPC_CELL_NATIVE=y
CONFIG_PPC_IBM_CELL_BLADE=y
@@ -183,10 +201,12 @@ CONFIG_CBE_RAS=y
CONFIG_CBE_THERM=m
CONFIG_CBE_CPUFREQ=m
CONFIG_CBE_CPUFREQ_PMI=m
+CONFIG_OPROFILE_CELL=y
# CONFIG_PQ2ADS is not set
CONFIG_PPC_NATIVE=y
CONFIG_UDBG_RTAS_CONSOLE=y
CONFIG_PPC_UDBG_BEAT=y
+# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
@@ -219,7 +239,6 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# CPU Frequency drivers
#
-# CONFIG_CPM2 is not set
CONFIG_AXON_RAM=m
# CONFIG_FSL_ULI1575 is not set
@@ -235,16 +254,20 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_FORCE_MAX_ZONEORDER=9
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
# CONFIG_IOMMU_VMERGE is not set
+CONFIG_IOMMU_HELPER=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
@@ -267,6 +290,7 @@ CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
+CONFIG_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
@@ -276,12 +300,12 @@ CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_NODES_SPAN_OTHER_NODES=y
CONFIG_PPC_HAS_HASH_64K=y
CONFIG_PPC_64K_PAGES=y
+# CONFIG_PPC_SUBPAGE_PROT is not set
CONFIG_SCHED_SMT=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_SECCOMP=y
-# CONFIG_WANT_DEVICE_TREE is not set
CONFIG_ISA_DMA_API=y
#
@@ -318,6 +342,7 @@ CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -368,6 +393,7 @@ CONFIG_IPV6_TUNNEL=m
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
@@ -375,7 +401,6 @@ CONFIG_NETFILTER=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
-# CONFIG_NF_CONNTRACK_ENABLED is not set
# CONFIG_NF_CONNTRACK is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -383,20 +408,25 @@ CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -411,20 +441,16 @@ CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
@@ -433,7 +459,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
#
# CONFIG_IP6_NF_QUEUE is not set
# CONFIG_IP6_NF_IPTABLES is not set
@@ -459,6 +485,7 @@ CONFIG_NET_CLS_ROUTE=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -467,7 +494,7 @@ CONFIG_NET_CLS_ROUTE=y
# Wireless
#
# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
+CONFIG_WIRELESS_EXT=y
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
@@ -505,7 +532,7 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
@@ -513,11 +540,13 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
@@ -534,12 +563,12 @@ CONFIG_IDE_PROC_FS=y
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
@@ -571,7 +600,6 @@ CONFIG_BLK_DEV_SIIMAGE=y
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_CELLEB=y
-# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
@@ -637,6 +665,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -689,6 +718,7 @@ CONFIG_SATA_PROMISE=y
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
@@ -703,6 +733,7 @@ CONFIG_PATA_PDC2027X=m
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_SCC is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
@@ -748,7 +779,6 @@ CONFIG_MACVLAN=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
@@ -773,6 +803,9 @@ CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -788,6 +821,7 @@ CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
CONFIG_SPIDER_NET=y
CONFIG_GELIC_NET=m
+CONFIG_GELIC_WIRELESS=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_NETDEV_10000=y
@@ -802,6 +836,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_PASEMI_MAC is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
@@ -824,7 +859,6 @@ CONFIG_NETDEV_10000=y
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -883,16 +917,17 @@ CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_MOXA_SMARTIO_NEW is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -976,13 +1011,12 @@ CONFIG_I2C_ALGOBIT=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -998,6 +1032,7 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1082,6 +1117,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@@ -1095,10 +1131,10 @@ CONFIG_USB_DEVICE_CLASS=y
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD_PPC_OF=y
@@ -1149,10 +1185,6 @@ CONFIG_USB_MON=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
@@ -1178,16 +1210,9 @@ CONFIG_USB_MON=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
@@ -1198,6 +1223,7 @@ CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
# CONFIG_INFINIBAND_AMSO1100 is not set
# CONFIG_MLX4_INFINIBAND is not set
+# CONFIG_INFINIBAND_NES is not set
CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_CM is not set
CONFIG_INFINIBAND_IPOIB_DEBUG=y
@@ -1211,7 +1237,9 @@ CONFIG_EDAC=y
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
+CONFIG_EDAC_CELL=y
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -1239,12 +1267,10 @@ CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
@@ -1293,8 +1319,10 @@ CONFIG_HUGETLB_PAGE=y
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -1382,7 +1410,6 @@ CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
@@ -1404,11 +1431,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-# CONFIG_KPROBES is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
@@ -1427,6 +1449,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1439,9 +1462,9 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-# CONFIG_FORCED_INLINING is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -1464,7 +1487,9 @@ CONFIG_IRQSTACKS=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
@@ -1483,6 +1508,9 @@ CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
@@ -1497,11 +1525,14 @@ CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/celleb_defconfig b/arch/powerpc/configs/celleb_defconfig
index 9ed2e098f96..9ba3c6fc2fe 100644
--- a/arch/powerpc/configs/celleb_defconfig
+++ b/arch/powerpc/configs/celleb_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:07 2007
+# Linux kernel version: 2.6.25-rc6
+# Thu Mar 20 10:32:45 2008
#
CONFIG_PPC64=y
@@ -28,6 +28,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -69,16 +70,22 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_USER_SCHED is not set
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -92,11 +99,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -104,6 +113,14 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -131,6 +148,7 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
@@ -141,8 +159,8 @@ CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_PPC_86xx is not set
# CONFIG_PPC_PSERIES is not set
# CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_PASEMI is not set
@@ -164,6 +182,7 @@ CONFIG_CBE_RAS=y
CONFIG_PPC_NATIVE=y
CONFIG_UDBG_RTAS_CONSOLE=y
CONFIG_PPC_UDBG_BEAT=y
+# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
@@ -177,7 +196,6 @@ CONFIG_PPC_RTAS=y
CONFIG_PPC_INDIRECT_IO=y
CONFIG_GENERIC_IOMAP=y
# CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
@@ -192,16 +210,20 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
# CONFIG_IOMMU_VMERGE is not set
+CONFIG_IOMMU_HELPER=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_IRQ_ALL_CPUS is not set
@@ -223,6 +245,7 @@ CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
+# CONFIG_MEMORY_HOTREMOVE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
@@ -237,7 +260,6 @@ CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_SECCOMP=y
-# CONFIG_WANT_DEVICE_TREE is not set
CONFIG_ISA_DMA_API=y
#
@@ -273,6 +295,7 @@ CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -320,12 +343,13 @@ CONFIG_IPV6_TUNNEL=m
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
@@ -337,7 +361,7 @@ CONFIG_IP_NF_QUEUE=m
# CONFIG_IP_NF_ARPTABLES is not set
#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
#
# CONFIG_IP6_NF_QUEUE is not set
# CONFIG_IP6_NF_IPTABLES is not set
@@ -362,6 +386,7 @@ CONFIG_IP_NF_QUEUE=m
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -408,7 +433,7 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
@@ -416,16 +441,19 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=m
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
@@ -437,12 +465,12 @@ CONFIG_IDE_PROC_FS=y
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
@@ -474,7 +502,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_CELLEB=y
-# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
@@ -540,6 +567,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
@@ -589,7 +617,6 @@ CONFIG_NETDEVICES=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
@@ -612,6 +639,9 @@ CONFIG_NETDEV_1000=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -638,6 +668,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_PASEMI_MAC is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
@@ -660,7 +691,6 @@ CONFIG_NETDEV_10000=y
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -719,16 +749,17 @@ CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_MOXA_SMARTIO_NEW is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -802,13 +833,12 @@ CONFIG_I2C_ALGOBIT=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -824,6 +854,7 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -905,6 +936,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@@ -918,10 +950,10 @@ CONFIG_USB_DEVICEFS=y
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
@@ -969,10 +1001,6 @@ CONFIG_USB_MON=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
@@ -998,20 +1026,14 @@ CONFIG_USB_MON=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -1041,12 +1063,10 @@ CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -1095,8 +1115,10 @@ CONFIG_HUGETLB_PAGE=y
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -1188,7 +1210,6 @@ CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
@@ -1206,10 +1227,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
@@ -1228,6 +1245,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1240,9 +1258,9 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-# CONFIG_FORCED_INLINING is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -1265,7 +1283,9 @@ CONFIG_IRQSTACKS=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
@@ -1284,6 +1304,9 @@ CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
@@ -1299,11 +1322,13 @@ CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_TEST=m
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig
index 5989b5d2277..38b85b211c3 100644
--- a/arch/powerpc/configs/chrp32_defconfig
+++ b/arch/powerpc/configs/chrp32_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:09 2007
+# Linux kernel version: 2.6.25-rc6
+# Thu Mar 20 10:33:36 2008
#
# CONFIG_PPC64 is not set
@@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -67,16 +68,22 @@ CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_USER_SCHED is not set
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -90,11 +97,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -102,6 +111,14 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -130,6 +147,7 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
@@ -140,16 +158,17 @@ CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
CONFIG_PPC_CHRP=y
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_MPC5121_ADS is not set
# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
-# CONFIG_PPC_EFIKA is not set
-# CONFIG_PPC_LITE5200 is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
CONFIG_PPC_NATIVE=y
# CONFIG_UDBG_RTAS_CONSOLE is not set
+# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC_I8259=y
@@ -163,7 +182,6 @@ CONFIG_PPC_MPC106=y
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_TAU is not set
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
@@ -179,13 +197,16 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
CONFIG_IRQ_ALL_CPUS=y
CONFIG_ARCH_FLATMEM_ENABLE=y
@@ -207,7 +228,6 @@ CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_SECCOMP=y
-# CONFIG_WANT_DEVICE_TREE is not set
CONFIG_ISA_DMA_API=y
#
@@ -286,74 +306,32 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_ADVANCED is not set
#
# Core Netfilter Configuration
#
-# CONFIG_NETFILTER_NETLINK is not set
-CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
-# CONFIG_NF_CT_ACCT is not set
-# CONFIG_NF_CONNTRACK_MARK is not set
-# CONFIG_NF_CONNTRACK_EVENTS is not set
-# CONFIG_NF_CT_PROTO_SCTP is not set
-# CONFIG_NF_CT_PROTO_UDPLITE is not set
-# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_NF_CONNTRACK_FTP=m
-# CONFIG_NF_CONNTRACK_H323 is not set
CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-# CONFIG_NF_CONNTRACK_PPTP is not set
-# CONFIG_NF_CONNTRACK_SANE is not set
CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_IPRANGE is not set
-# CONFIG_IP_NF_MATCH_TOS is not set
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_AH is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_OWNER is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
@@ -361,20 +339,14 @@ CONFIG_IP_NF_TARGET_LOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_SAME is not set
-# CONFIG_NF_NAT_SNMP_BASIC is not set
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
+# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
CONFIG_NF_NAT_SIP=m
# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
@@ -396,6 +368,7 @@ CONFIG_NF_NAT_SIP=m
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -445,7 +418,7 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
@@ -453,16 +426,19 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
@@ -474,12 +450,12 @@ CONFIG_IDE_PROC_FS=y
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
@@ -510,7 +486,6 @@ CONFIG_BLK_DEV_SL82C105=y
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
#
# Other IDE chipsets support
@@ -599,6 +574,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
@@ -607,7 +583,6 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
@@ -640,7 +615,6 @@ CONFIG_NETDEVICES=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
@@ -688,6 +662,7 @@ CONFIG_8139TOO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
@@ -701,6 +676,9 @@ CONFIG_NETDEV_1000=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -726,6 +704,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
@@ -758,7 +737,6 @@ CONFIG_PPPOE=m
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -838,6 +816,7 @@ CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -917,14 +896,12 @@ CONFIG_I2C_ALGOBIT=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -940,6 +917,7 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -1083,6 +1061,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@@ -1096,9 +1075,9 @@ CONFIG_USB_DEVICE_CLASS=y
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
@@ -1147,10 +1126,6 @@ CONFIG_USB_MON=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
@@ -1176,20 +1151,14 @@ CONFIG_USB_MON=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -1215,12 +1184,10 @@ CONFIG_FS_MBCACHE=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -1267,8 +1234,10 @@ CONFIG_TMPFS=y
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -1342,7 +1311,6 @@ CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
@@ -1360,10 +1328,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
@@ -1382,6 +1346,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1395,9 +1360,9 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -1420,6 +1385,7 @@ CONFIG_XMON_DISASSEMBLY=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_BLKCIPHER=m
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=m
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
@@ -1437,6 +1403,9 @@ CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
@@ -1451,11 +1420,13 @@ CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig
index 01ad5951ade..2b1504e0a11 100644
--- a/arch/powerpc/configs/ep8248e_defconfig
+++ b/arch/powerpc/configs/ep8248e_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Fri Jan 11 14:02:06 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:09 2008
#
# CONFIG_PPC64 is not set
@@ -28,6 +28,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -69,11 +70,14 @@ CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
@@ -85,17 +89,26 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -117,6 +130,7 @@ CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
@@ -125,8 +139,8 @@ CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_PPC_82xx=y
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_MPC8272_ADS is not set
@@ -135,6 +149,7 @@ CONFIG_EP8248E=y
# CONFIG_PQ2ADS is not set
CONFIG_8260=y
CONFIG_8272=y
+# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
@@ -163,12 +178,16 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_FLATMEM=y
@@ -183,11 +202,7 @@ CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="ep8248e.dts"
CONFIG_ISA_DMA_API=y
#
@@ -272,12 +287,13 @@ CONFIG_IPV6_SIT=y
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
@@ -287,6 +303,13 @@ CONFIG_NETFILTER=y
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
@@ -300,6 +323,7 @@ CONFIG_NETFILTER=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
@@ -308,6 +332,7 @@ CONFIG_NETFILTER=y
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
@@ -415,6 +440,7 @@ CONFIG_BLK_DEV_LOOP=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -448,6 +474,7 @@ CONFIG_DAVICOM_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
CONFIG_MDIO_BITBANG=y
CONFIG_NET_ETHERNET=y
@@ -462,6 +489,8 @@ CONFIG_FS_ENET=y
CONFIG_FS_ENET_HAS_FCC=y
# CONFIG_FS_ENET_MDIO_FCC is not set
CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_GIANFAR is not set
CONFIG_NETDEV_10000=y
#
@@ -532,6 +561,7 @@ CONFIG_HW_RANDOM=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -571,8 +601,10 @@ CONFIG_DAB=y
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -593,12 +625,10 @@ CONFIG_JBD=y
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
@@ -626,6 +656,7 @@ CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -634,8 +665,10 @@ CONFIG_TMPFS=y
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -715,7 +748,6 @@ CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_UCC_SLOW is not set
#
# Library routines
@@ -731,9 +763,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
@@ -764,8 +793,8 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -784,6 +813,7 @@ CONFIG_BDI_SWITCH=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
@@ -797,6 +827,9 @@ CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -816,6 +849,7 @@ CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig
index a1f98200d9e..125b4764aad 100644
--- a/arch/powerpc/configs/ep88xc_defconfig
+++ b/arch/powerpc/configs/ep88xc_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:13 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:10 2008
#
# CONFIG_PPC64 is not set
@@ -26,6 +26,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -63,15 +64,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
@@ -84,11 +89,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
+CONFIG_COMPAT_BRK=y
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_VM_EVENT_COUNTERS is not set
@@ -96,6 +103,13 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
@@ -117,12 +131,13 @@ CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
CONFIG_CPM1=y
@@ -130,6 +145,7 @@ CONFIG_CPM1=y
# CONFIG_MPC86XADS is not set
# CONFIG_MPC885ADS is not set
CONFIG_PPC_EP88XC=y
+# CONFIG_PPC_ADDER875 is not set
#
# MPC8xx CPM Options
@@ -146,6 +162,7 @@ CONFIG_NO_UCODE_PATCH=y
# CONFIG_I2C_SPI_UCODE_PATCH is not set
# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
@@ -156,7 +173,6 @@ CONFIG_NO_UCODE_PATCH=y
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
CONFIG_PPC_CPM_NEW_BINDING=y
# CONFIG_FSL_ULI1575 is not set
CONFIG_CPM=y
@@ -174,6 +190,7 @@ CONFIG_HZ_100=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
@@ -181,7 +198,10 @@ CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_8XX_MINIMAL_FPEMU=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -200,11 +220,7 @@ CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="ep88xc.dts"
CONFIG_ISA_DMA_API=y
#
@@ -301,6 +317,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -407,6 +424,7 @@ CONFIG_OF_DEVICE=y
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -441,6 +459,7 @@ CONFIG_LXT_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -465,7 +484,6 @@ CONFIG_FS_ENET_MDIO_FEC=y
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -528,6 +546,7 @@ CONFIG_GEN_RTC=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -567,9 +586,11 @@ CONFIG_DAB=y
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -588,11 +609,9 @@ CONFIG_DAB=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -635,8 +654,10 @@ CONFIG_TMPFS=y
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -683,7 +704,6 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
@@ -698,7 +718,6 @@ CONFIG_ZLIB_INFLATE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
@@ -717,6 +736,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -727,8 +747,8 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index 3673dd23120..0f82f66a60f 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:15 2007
+# Linux kernel version: 2.6.25-rc6
+# Thu Mar 20 10:36:41 2008
#
CONFIG_PPC64=y
@@ -27,6 +27,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -48,7 +49,9 @@ CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_PPC64_SWSUSP=y
+CONFIG_HIBERNATE_64=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
# CONFIG_PPC_OF_PLATFORM_PCI is not set
@@ -68,18 +71,22 @@ CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_USER_SCHED is not set
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -93,11 +100,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -105,6 +114,15 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -132,6 +150,7 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
@@ -142,8 +161,8 @@ CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_PPC_86xx is not set
# CONFIG_PPC_PSERIES is not set
# CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
CONFIG_PPC_PMAC=y
CONFIG_PPC_PMAC64=y
# CONFIG_PPC_MAPLE is not set
@@ -155,6 +174,7 @@ CONFIG_PPC_PMAC64=y
# CONFIG_PPC_IBM_CELL_BLADE is not set
# CONFIG_PQ2ADS is not set
CONFIG_PPC_NATIVE=y
+# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
@@ -185,7 +205,6 @@ CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CPU Frequency drivers
#
CONFIG_CPU_FREQ_PMAC64=y
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
@@ -200,17 +219,21 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_IOMMU_VMERGE=y
+CONFIG_IOMMU_HELPER=y
# CONFIG_HOTPLUG_CPU is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
@@ -236,11 +259,9 @@ CONFIG_BOUNCE=y
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
# CONFIG_PM is not set
-CONFIG_SUSPEND_SMP_POSSIBLE=y
-CONFIG_HIBERNATION_SMP_POSSIBLE=y
CONFIG_SECCOMP=y
-# CONFIG_WANT_DEVICE_TREE is not set
CONFIG_ISA_DMA_API=y
#
@@ -276,6 +297,7 @@ CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
@@ -310,12 +332,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
-# CONFIG_NETFILTER_NETLINK is not set
-CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
# CONFIG_NF_CT_ACCT is not set
CONFIG_NF_CONNTRACK_MARK=y
@@ -331,6 +355,7 @@ CONFIG_NF_CONNTRACK_IRC=m
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set
CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
# CONFIG_NETFILTER_XTABLES is not set
#
@@ -363,6 +388,7 @@ CONFIG_LLC=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -409,7 +435,7 @@ CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -419,16 +445,19 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
@@ -440,12 +469,12 @@ CONFIG_IDE_PROC_FS=y
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
@@ -478,7 +507,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_IDE_PMAC=y
CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
CONFIG_BLK_DEV_IDEDMA_PMAC=y
-# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
@@ -544,6 +572,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -596,6 +625,7 @@ CONFIG_SATA_SVW=y
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
@@ -610,6 +640,7 @@ CONFIG_SATA_SVW=y
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
@@ -676,7 +707,6 @@ CONFIG_BONDING=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
@@ -701,6 +731,9 @@ CONFIG_E1000=y
# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -726,6 +759,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_PASEMI_MAC is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
CONFIG_TR=y
CONFIG_IBMOL=y
# CONFIG_3C359 is not set
@@ -771,7 +805,6 @@ CONFIG_PPPOE=m
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -834,6 +867,7 @@ CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -901,13 +935,12 @@ CONFIG_I2C_POWERMAC=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -923,6 +956,7 @@ CONFIG_I2C_POWERMAC=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -1083,6 +1117,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
@@ -1108,6 +1143,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
@@ -1125,6 +1161,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
@@ -1166,6 +1203,10 @@ CONFIG_SND_USB_AUDIO=m
#
#
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
@@ -1192,6 +1233,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@@ -1205,9 +1247,9 @@ CONFIG_USB_DEVICE_CLASS=y
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
@@ -1259,11 +1301,8 @@ CONFIG_USB_MON=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
@@ -1284,6 +1323,7 @@ CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
+# CONFIG_USB_SERIAL_IUU is not set
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
@@ -1316,7 +1356,6 @@ CONFIG_USB_SERIAL_XIRCOM=m
# CONFIG_USB_SERIAL_OPTION is not set
CONFIG_USB_SERIAL_OMNINET=m
# CONFIG_USB_SERIAL_DEBUG is not set
-CONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
@@ -1341,20 +1380,14 @@ CONFIG_USB_APPLEDISPLAY=m
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -1393,12 +1426,10 @@ CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -1447,8 +1478,10 @@ CONFIG_HFSPLUS_FS=m
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -1546,7 +1579,6 @@ CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
@@ -1564,11 +1596,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
@@ -1587,6 +1614,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1599,9 +1627,9 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -1621,7 +1649,9 @@ CONFIG_BOOTX_TEXT=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
@@ -1640,6 +1670,9 @@ CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -1655,11 +1688,13 @@ CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_TEST=m
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig
index 4a87745c780..8d9a84f5015 100644
--- a/arch/powerpc/configs/iseries_defconfig
+++ b/arch/powerpc/configs/iseries_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc3
-# Wed Nov 21 11:19:59 2007
+# Linux kernel version: 2.6.25-rc6
+# Thu Mar 20 10:43:46 2008
#
CONFIG_PPC64=y
@@ -28,6 +28,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -68,8 +69,6 @@ CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
@@ -77,11 +76,17 @@ CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_USER_SCHED is not set
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -95,11 +100,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -107,6 +114,14 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -134,6 +149,7 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
@@ -153,8 +169,8 @@ CONFIG_VIODASD=y
CONFIG_VIOCD=m
CONFIG_VIOTAPE=m
CONFIG_VIOPATH=y
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_PASEMI is not set
@@ -164,6 +180,7 @@ CONFIG_VIOPATH=y
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_IBM_CELL_BLADE is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
@@ -176,7 +193,6 @@ CONFIG_IBMVIO=y
CONFIG_PPC_INDIRECT_IO=y
CONFIG_GENERIC_IOMAP=y
# CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
@@ -191,15 +207,19 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_IOMMU_VMERGE=y
+CONFIG_IOMMU_HELPER=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
@@ -227,7 +247,6 @@ CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_SECCOMP=y
-# CONFIG_WANT_DEVICE_TREE is not set
CONFIG_ISA_DMA_API=y
#
@@ -263,6 +282,7 @@ CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_XFRM_SUB_POLICY=y
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
@@ -297,12 +317,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
-# CONFIG_NETFILTER_NETLINK is not set
-CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
# CONFIG_NF_CT_ACCT is not set
CONFIG_NF_CONNTRACK_MARK=y
@@ -318,6 +340,7 @@ CONFIG_NF_CONNTRACK_IRC=m
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set
CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
@@ -326,8 +349,10 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
@@ -337,14 +362,17 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
@@ -362,13 +390,10 @@ CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
# CONFIG_IP_NF_MATCH_AH is not set
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
@@ -379,7 +404,6 @@ CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
# CONFIG_NF_NAT_SNMP_BASIC is not set
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
@@ -389,7 +413,6 @@ CONFIG_NF_NAT_TFTP=m
# CONFIG_NF_NAT_H323 is not set
# CONFIG_NF_NAT_SIP is not set
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
@@ -425,6 +448,7 @@ CONFIG_NET_CLS_ROUTE=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -470,7 +494,7 @@ CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
@@ -478,6 +502,8 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -518,6 +544,7 @@ CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_LOWLEVEL=y
@@ -543,6 +570,7 @@ CONFIG_SCSI_LOWLEVEL=y
CONFIG_SCSI_IBMVSCSI=m
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
@@ -589,7 +617,6 @@ CONFIG_BONDING=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
@@ -618,6 +645,7 @@ CONFIG_E100=y
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
@@ -631,6 +659,9 @@ CONFIG_E1000=m
# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -656,6 +687,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_PASEMI_MAC is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
CONFIG_TR=y
CONFIG_IBMOL=y
# CONFIG_3C359 is not set
@@ -683,7 +715,6 @@ CONFIG_PPPOE=m
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
@@ -734,6 +765,7 @@ CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -772,6 +804,7 @@ CONFIG_DEVPORT=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -821,10 +854,12 @@ CONFIG_DUMMY_CONSOLE=y
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -869,12 +904,10 @@ CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_NOLOCK=m
CONFIG_GFS2_FS_LOCKING_DLM=m
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -924,8 +957,10 @@ CONFIG_CONFIGFS_FS=m
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -1009,7 +1044,6 @@ CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_UTF8 is not set
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
@@ -1031,10 +1065,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
@@ -1053,6 +1083,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1065,9 +1096,9 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-# CONFIG_FORCED_INLINING is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
CONFIG_DEBUG_STACKOVERFLOW=y
@@ -1089,6 +1120,7 @@ CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
@@ -1107,6 +1139,9 @@ CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -1122,11 +1157,13 @@ CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_SEED=m
+# CONFIG_CRYPTO_SALSA20 is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index 7b4280811fb..22a943afc3c 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:22 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:10 2008
#
# CONFIG_PPC64 is not set
@@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -66,16 +67,24 @@ CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -89,11 +98,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -101,6 +112,14 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -128,6 +147,7 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
@@ -138,22 +158,24 @@ CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_MPC5121_ADS is not set
# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
-# CONFIG_PPC_EFIKA is not set
-# CONFIG_PPC_LITE5200 is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
CONFIG_EMBEDDED6xx=y
CONFIG_LINKSTATION=y
+# CONFIG_STORCENTER is not set
# CONFIG_MPC7448HPC2 is not set
# CONFIG_PPC_HOLLY is not set
# CONFIG_PPC_PRPMC2800 is not set
CONFIG_MPC10X_BRIDGE=y
CONFIG_MPC10X_OPENPIC=y
# CONFIG_MPC10X_STORE_GATHERING is not set
+# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
@@ -165,7 +187,6 @@ CONFIG_MPIC=y
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_TAU is not set
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
@@ -181,12 +202,16 @@ CONFIG_HZ_100=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -206,10 +231,7 @@ CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-# CONFIG_WANT_DEVICE_TREE is not set
CONFIG_ISA_DMA_API=y
#
@@ -259,6 +281,7 @@ CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -295,12 +318,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
-# CONFIG_NETFILTER_NETLINK is not set
-CONFIG_NF_CONNTRACK_ENABLED=m
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
CONFIG_NF_CONNTRACK=m
# CONFIG_NF_CT_ACCT is not set
# CONFIG_NF_CONNTRACK_MARK is not set
@@ -317,6 +341,7 @@ CONFIG_NF_CONNTRACK_PPTP=m
# CONFIG_NF_CONNTRACK_SANE is not set
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
@@ -325,8 +350,10 @@ CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
@@ -336,14 +363,17 @@ CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
CONFIG_NETFILTER_XT_MATCH_MAC=m
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
CONFIG_NETFILTER_XT_MATCH_STATE=m
@@ -361,13 +391,10 @@ CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-# CONFIG_IP_NF_MATCH_TOS is not set
CONFIG_IP_NF_MATCH_RECENT=m
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
-CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
@@ -378,7 +405,6 @@ CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_SAME is not set
# CONFIG_NF_NAT_SNMP_BASIC is not set
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_FTP=m
@@ -389,7 +415,6 @@ CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
@@ -418,6 +443,7 @@ CONFIG_IP_NF_ARP_MANGLE=m
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -459,6 +485,7 @@ CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_OF_PARTS is not set
#
# User Modules And Translation Layers
@@ -554,7 +581,7 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=2
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
@@ -562,6 +589,8 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -626,6 +655,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -656,6 +686,7 @@ CONFIG_ATA=y
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
+# CONFIG_SATA_FSL is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
@@ -679,6 +710,7 @@ CONFIG_PATA_IT821X=y
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
@@ -693,6 +725,7 @@ CONFIG_PATA_SIL680=y
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
@@ -711,7 +744,6 @@ CONFIG_NETDEVICES=y
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
@@ -742,6 +774,9 @@ CONFIG_NETDEV_1000=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -754,6 +789,7 @@ CONFIG_R8169=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_GIANFAR is not set
# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
@@ -768,6 +804,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
@@ -790,7 +827,6 @@ CONFIG_NETDEV_10000=y
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
@@ -851,6 +887,7 @@ CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -924,14 +961,12 @@ CONFIG_I2C_MPC=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -956,6 +991,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -985,6 +1021,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
@@ -994,9 +1031,11 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -1063,6 +1102,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@@ -1076,9 +1116,10 @@ CONFIG_USB_DEVICE_CLASS=y
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_FSL is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
@@ -1130,12 +1171,9 @@ CONFIG_USB_MON=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
+# CONFIG_USB_EZUSB is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
@@ -1156,6 +1194,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=y
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
@@ -1199,16 +1238,9 @@ CONFIG_USB_SERIAL_FTDI_SIO=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
@@ -1240,6 +1272,7 @@ CONFIG_RTC_DRV_RS5C372=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
@@ -1249,9 +1282,10 @@ CONFIG_RTC_DRV_RS5C372=y
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@@ -1259,6 +1293,7 @@ CONFIG_RTC_DRV_RS5C372=y
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -1288,12 +1323,10 @@ CONFIG_XFS_FS=m
# CONFIG_XFS_RT is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -1344,8 +1377,10 @@ CONFIG_TMPFS=y
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -1427,7 +1462,6 @@ CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
@@ -1447,7 +1481,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
@@ -1466,6 +1499,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1478,9 +1512,9 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -1500,6 +1534,7 @@ CONFIG_FORCED_INLINING=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
@@ -1517,6 +1552,9 @@ CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -1532,11 +1570,14 @@ CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig
index b0266de4849..a3d52e3f2de 100644
--- a/arch/powerpc/configs/mpc7448_hpc2_defconfig
+++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:28 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:11 2008
#
# CONFIG_PPC64 is not set
@@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -66,15 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -87,11 +92,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -99,6 +106,13 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -121,6 +135,7 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
@@ -131,20 +146,22 @@ CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_MPC5121_ADS is not set
# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
-# CONFIG_PPC_EFIKA is not set
-# CONFIG_PPC_LITE5200 is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
CONFIG_EMBEDDED6xx=y
# CONFIG_LINKSTATION is not set
+# CONFIG_STORCENTER is not set
CONFIG_MPC7448HPC2=y
# CONFIG_PPC_HOLLY is not set
# CONFIG_PPC_PRPMC2800 is not set
CONFIG_TSI108_BRIDGE=y
+# CONFIG_IPIC is not set
CONFIG_MPIC=y
CONFIG_MPIC_WEIRD=y
# CONFIG_PPC_I8259 is not set
@@ -156,7 +173,6 @@ CONFIG_MPIC_WEIRD=y
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_TAU is not set
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
@@ -172,12 +188,16 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -197,11 +217,7 @@ CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
@@ -249,6 +265,7 @@ CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -304,6 +321,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -348,7 +366,7 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
@@ -356,6 +374,8 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -419,6 +439,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -472,6 +493,7 @@ CONFIG_SATA_MV=y
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
@@ -505,7 +527,6 @@ CONFIG_NETDEVICES=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
@@ -521,6 +542,7 @@ CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -552,6 +574,7 @@ CONFIG_8139TOO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
@@ -563,6 +586,9 @@ CONFIG_NETDEV_1000=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -589,6 +615,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
@@ -602,7 +629,6 @@ CONFIG_NETDEV_10000=y
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -645,6 +671,7 @@ CONFIG_INPUT=y
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -703,6 +730,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -755,16 +783,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -790,12 +816,10 @@ CONFIG_FS_MBCACHE=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -837,8 +861,10 @@ CONFIG_TMPFS=y
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -883,7 +909,6 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
@@ -899,7 +924,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
@@ -913,6 +937,7 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_BOOTX_TEXT is not set
@@ -924,5 +949,49 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig
index 5eae305215d..0264c5757f7 100644
--- a/arch/powerpc/configs/mpc8272_ads_defconfig
+++ b/arch/powerpc/configs/mpc8272_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc5
-# Thu Dec 13 22:40:57 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:13 2008
#
# CONFIG_PPC64 is not set
@@ -28,6 +28,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -69,9 +70,14 @@ CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
@@ -83,11 +89,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -95,6 +103,13 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -116,6 +131,7 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
@@ -124,16 +140,18 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_PPC_82xx=y
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
CONFIG_MPC8272_ADS=y
# CONFIG_PQ2FADS is not set
+# CONFIG_EP8248E is not set
CONFIG_PQ2ADS=y
CONFIG_8260=y
CONFIG_8272=y
CONFIG_PQ2_ADS_PCI_PIC=y
+# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
@@ -162,12 +180,16 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_FLATMEM=y
@@ -182,11 +204,7 @@ CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="mpc8272ads.dts"
CONFIG_ISA_DMA_API=y
#
@@ -205,6 +223,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
#
# Advanced setup
@@ -277,12 +296,13 @@ CONFIG_IPV6_SIT=y
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
@@ -292,6 +312,13 @@ CONFIG_NETFILTER=y
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
@@ -305,6 +332,7 @@ CONFIG_NETFILTER=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
@@ -313,6 +341,7 @@ CONFIG_NETFILTER=y
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
@@ -427,6 +456,7 @@ CONFIG_BLK_DEV_LOOP=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -472,6 +502,7 @@ CONFIG_DAVICOM_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
CONFIG_MDIO_BITBANG=y
CONFIG_NET_ETHERNET=y
@@ -497,6 +528,8 @@ CONFIG_NETDEV_1000=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_R8169 is not set
@@ -507,6 +540,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_GIANFAR is not set
# CONFIG_QLA3XXX is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
@@ -519,6 +553,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
@@ -642,6 +677,7 @@ CONFIG_DEVPORT=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -684,9 +720,11 @@ CONFIG_DAB=y
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -710,12 +748,10 @@ CONFIG_FS_MBCACHE=y
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
@@ -743,6 +779,7 @@ CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -751,8 +788,10 @@ CONFIG_TMPFS=y
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -833,7 +872,6 @@ CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_UCC_SLOW is not set
#
# Library routines
@@ -851,7 +889,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
@@ -870,6 +907,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -882,8 +920,8 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -902,6 +940,7 @@ CONFIG_BDI_SWITCH=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
@@ -915,6 +954,9 @@ CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -934,6 +976,7 @@ CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/mpc8313_rdb_defconfig b/arch/powerpc/configs/mpc8313_rdb_defconfig
index 3b29ac53844..7a862a6e3be 100644
--- a/arch/powerpc/configs/mpc8313_rdb_defconfig
+++ b/arch/powerpc/configs/mpc8313_rdb_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Thu Jan 17 16:35:55 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:14 2008
#
# CONFIG_PPC64 is not set
@@ -14,8 +14,8 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_83xx=y
CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
@@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -66,15 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -86,11 +91,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -98,6 +105,13 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -125,6 +139,7 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
@@ -133,11 +148,12 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_MPC83xx=y
CONFIG_MPC831x_RDB=y
# CONFIG_MPC832x_MDS is not set
# CONFIG_MPC832x_RDB is not set
@@ -145,7 +161,10 @@ CONFIG_MPC831x_RDB=y
# CONFIG_MPC834x_ITX is not set
# CONFIG_MPC836x_MDS is not set
# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
CONFIG_PPC_MPC831x=y
+CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
@@ -156,7 +175,6 @@ CONFIG_PPC_MPC831x=y
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
@@ -172,12 +190,16 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -196,11 +218,7 @@ CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
@@ -250,6 +268,7 @@ CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -305,6 +324,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -340,6 +360,7 @@ CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_OF_PARTS is not set
#
# User Modules And Translation Layers
@@ -415,6 +436,7 @@ CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_NAND_FSL_ELBC is not set
# CONFIG_MTD_ONENAND is not set
#
@@ -438,7 +460,7 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
@@ -446,6 +468,8 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -510,6 +534,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
@@ -549,7 +574,6 @@ CONFIG_NETDEVICES=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
@@ -565,6 +589,7 @@ CONFIG_CICADA_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -573,6 +598,7 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ENC28J60 is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -592,6 +618,7 @@ CONFIG_E100=y
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
@@ -603,6 +630,9 @@ CONFIG_NETDEV_1000=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -629,6 +659,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
@@ -651,7 +682,6 @@ CONFIG_NETDEV_10000=y
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -694,6 +724,7 @@ CONFIG_INPUT=y
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -767,14 +798,12 @@ CONFIG_I2C_MPC=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -813,6 +842,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -843,6 +873,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
@@ -852,9 +883,11 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -934,6 +967,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@@ -947,10 +981,10 @@ CONFIG_USB_DEVICE_CLASS=y
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
@@ -1001,10 +1035,6 @@ CONFIG_USB_MON=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
@@ -1030,14 +1060,6 @@ CONFIG_USB_MON=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -1063,7 +1085,9 @@ CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
@@ -1095,20 +1119,23 @@ CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
#
-# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@@ -1116,6 +1143,7 @@ CONFIG_RTC_DRV_DS1307=y
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -1141,12 +1169,10 @@ CONFIG_FS_MBCACHE=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -1199,8 +1225,10 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -1248,7 +1276,6 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
@@ -1266,7 +1293,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
@@ -1285,6 +1311,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1297,9 +1324,9 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -1318,6 +1345,7 @@ CONFIG_FORCED_INLINING=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
@@ -1335,6 +1363,9 @@ CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -1349,11 +1380,14 @@ CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/mpc8315_rdb_defconfig b/arch/powerpc/configs/mpc8315_rdb_defconfig
index 9adf7f98f67..1f57456dd81 100644
--- a/arch/powerpc/configs/mpc8315_rdb_defconfig
+++ b/arch/powerpc/configs/mpc8315_rdb_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Wed Jan 23 20:02:25 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:15 2008
#
# CONFIG_PPC64 is not set
@@ -14,8 +14,8 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_83xx=y
CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
@@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -66,15 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -86,11 +91,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -98,6 +105,12 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
@@ -126,6 +139,7 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
@@ -134,11 +148,12 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_MPC83xx=y
CONFIG_MPC831x_RDB=y
# CONFIG_MPC832x_MDS is not set
# CONFIG_MPC832x_RDB is not set
@@ -146,6 +161,8 @@ CONFIG_MPC831x_RDB=y
# CONFIG_MPC834x_ITX is not set
# CONFIG_MPC836x_MDS is not set
# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
CONFIG_PPC_MPC831x=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
@@ -158,7 +175,6 @@ CONFIG_IPIC=y
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
@@ -174,12 +190,16 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -198,11 +218,7 @@ CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
@@ -252,6 +268,7 @@ CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -307,6 +324,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -342,6 +360,7 @@ CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_OF_PARTS is not set
#
# User Modules And Translation Layers
@@ -417,6 +436,7 @@ CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_NAND_FSL_ELBC is not set
# CONFIG_MTD_ONENAND is not set
#
@@ -440,7 +460,7 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
@@ -448,6 +468,8 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -512,6 +534,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -566,6 +589,7 @@ CONFIG_SATA_FSL=y
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
@@ -623,6 +647,7 @@ CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -631,6 +656,7 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ENC28J60 is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -650,6 +676,7 @@ CONFIG_E100=y
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
@@ -661,7 +688,9 @@ CONFIG_NETDEV_1000=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -688,6 +717,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
@@ -710,7 +740,6 @@ CONFIG_NETDEV_10000=y
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -753,6 +782,7 @@ CONFIG_INPUT=y
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -826,14 +856,12 @@ CONFIG_I2C_MPC=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -872,6 +900,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -902,6 +931,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
@@ -911,9 +941,11 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -993,6 +1025,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@@ -1006,10 +1039,10 @@ CONFIG_USB_DEVICE_CLASS=y
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
@@ -1060,10 +1093,6 @@ CONFIG_USB_MON=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
@@ -1089,14 +1118,6 @@ CONFIG_USB_MON=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -1122,7 +1143,9 @@ CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
@@ -1154,20 +1177,23 @@ CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
#
-# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@@ -1175,6 +1201,7 @@ CONFIG_RTC_DRV_DS1307=y
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -1200,12 +1227,10 @@ CONFIG_FS_MBCACHE=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -1258,8 +1283,10 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -1324,7 +1351,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
@@ -1343,6 +1369,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1355,9 +1382,9 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -1376,6 +1403,7 @@ CONFIG_FORCED_INLINING=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
@@ -1393,6 +1421,9 @@ CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -1407,11 +1438,14 @@ CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/mpc832x_mds_defconfig b/arch/powerpc/configs/mpc832x_mds_defconfig
index 2d8951b1096..79d228f84c5 100644
--- a/arch/powerpc/configs/mpc832x_mds_defconfig
+++ b/arch/powerpc/configs/mpc832x_mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:33 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:16 2008
#
# CONFIG_PPC64 is not set
@@ -14,8 +14,8 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_83xx=y
CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
@@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -66,15 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -86,11 +91,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -98,6 +105,13 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -125,6 +139,7 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
@@ -133,18 +148,23 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-# CONFIG_MPC8313_RDB is not set
+CONFIG_MPC83xx=y
+# CONFIG_MPC831x_RDB is not set
CONFIG_MPC832x_MDS=y
# CONFIG_MPC832x_RDB is not set
# CONFIG_MPC834x_MDS is not set
# CONFIG_MPC834x_ITX is not set
# CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
CONFIG_PPC_MPC832x=y
+CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
@@ -156,7 +176,6 @@ CONFIG_PPC_MPC832x=y
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
CONFIG_QUICC_ENGINE=y
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
@@ -172,13 +191,17 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -197,11 +220,7 @@ CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
@@ -250,6 +269,7 @@ CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -305,6 +325,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -349,7 +370,7 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
@@ -357,6 +378,8 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -421,6 +444,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
@@ -451,7 +475,6 @@ CONFIG_NETDEVICES=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
@@ -467,6 +490,7 @@ CONFIG_DAVICOM_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -488,6 +512,9 @@ CONFIG_NETDEV_1000=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -518,6 +545,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
@@ -531,7 +559,6 @@ CONFIG_NETDEV_10000=y
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -574,6 +601,7 @@ CONFIG_INPUT=y
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -593,6 +621,7 @@ CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_QE is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -647,14 +676,12 @@ CONFIG_I2C_MPC=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -679,6 +706,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -708,6 +736,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
@@ -717,9 +746,11 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -785,17 +816,18 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
+
+#
+# Conflicting RTC option has been selected, check GEN_RTC and RTC
+#
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
@@ -822,6 +854,7 @@ CONFIG_RTC_DRV_DS1374=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
@@ -831,9 +864,10 @@ CONFIG_RTC_DRV_DS1374=y
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@@ -841,6 +875,7 @@ CONFIG_RTC_DRV_DS1374=y
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -866,12 +901,10 @@ CONFIG_FS_MBCACHE=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -913,8 +946,10 @@ CONFIG_TMPFS=y
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -958,7 +993,6 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
CONFIG_UCC_FAST=y
CONFIG_UCC=y
@@ -976,7 +1010,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
@@ -990,6 +1023,7 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1003,6 +1037,7 @@ CONFIG_ENABLE_MUST_CHECK=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
@@ -1020,6 +1055,9 @@ CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -1034,12 +1072,15 @@ CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/mpc832x_rdb_defconfig b/arch/powerpc/configs/mpc832x_rdb_defconfig
index 761718a63b7..ac913025713 100644
--- a/arch/powerpc/configs/mpc832x_rdb_defconfig
+++ b/arch/powerpc/configs/mpc832x_rdb_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:35 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:16 2008
#
# CONFIG_PPC64 is not set
@@ -14,8 +14,8 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_83xx=y
CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
@@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -66,15 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -86,11 +91,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -98,6 +105,13 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -125,6 +139,7 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
@@ -133,18 +148,23 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-# CONFIG_MPC8313_RDB is not set
+CONFIG_MPC83xx=y
+# CONFIG_MPC831x_RDB is not set
# CONFIG_MPC832x_MDS is not set
CONFIG_MPC832x_RDB=y
# CONFIG_MPC834x_MDS is not set
# CONFIG_MPC834x_ITX is not set
# CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
CONFIG_PPC_MPC832x=y
+CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
@@ -156,7 +176,6 @@ CONFIG_PPC_MPC832x=y
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
CONFIG_QUICC_ENGINE=y
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
@@ -172,13 +191,17 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -197,11 +220,7 @@ CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
@@ -250,6 +269,7 @@ CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -305,6 +325,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -350,7 +371,7 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
@@ -358,6 +379,8 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -422,6 +445,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
@@ -452,7 +476,6 @@ CONFIG_NETDEVICES=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
@@ -468,6 +491,7 @@ CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
CONFIG_ICPLUS_PHY=y
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -476,6 +500,7 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ENC28J60 is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -491,6 +516,9 @@ CONFIG_E1000=y
# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -521,6 +549,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
@@ -543,7 +572,6 @@ CONFIG_NETDEV_10000=y
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -586,6 +614,7 @@ CONFIG_INPUT=y
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -605,6 +634,7 @@ CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_QE is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -660,14 +690,12 @@ CONFIG_I2C_MPC=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -705,6 +733,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -735,6 +764,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
@@ -744,9 +774,11 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -826,6 +858,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@@ -839,9 +872,10 @@ CONFIG_USB_DEVICE_CLASS=y
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_FSL is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
@@ -892,10 +926,6 @@ CONFIG_USB_MON=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
@@ -921,14 +951,6 @@ CONFIG_USB_MON=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
@@ -948,10 +970,12 @@ CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set
CONFIG_MMC_SPI=y
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -977,12 +1001,10 @@ CONFIG_FS_MBCACHE=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -1027,8 +1049,10 @@ CONFIG_TMPFS=y
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -1116,7 +1140,6 @@ CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
CONFIG_UCC_FAST=y
CONFIG_UCC=y
@@ -1134,7 +1157,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
@@ -1148,6 +1170,7 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1161,6 +1184,7 @@ CONFIG_ENABLE_MUST_CHECK=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
@@ -1178,6 +1202,9 @@ CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -1192,12 +1219,15 @@ CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/mpc834x_itx_defconfig b/arch/powerpc/configs/mpc834x_itx_defconfig
index 2fbe4e5344f..e1de399a7bd 100644
--- a/arch/powerpc/configs/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/mpc834x_itx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:37 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:17 2008
#
# CONFIG_PPC64 is not set
@@ -14,8 +14,8 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_83xx=y
CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
@@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -66,15 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -86,11 +91,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -98,6 +105,13 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -125,6 +139,7 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
@@ -133,18 +148,23 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-# CONFIG_MPC8313_RDB is not set
+CONFIG_MPC83xx=y
+# CONFIG_MPC831x_RDB is not set
# CONFIG_MPC832x_MDS is not set
# CONFIG_MPC832x_RDB is not set
# CONFIG_MPC834x_MDS is not set
CONFIG_MPC834x_ITX=y
# CONFIG_MPC836x_MDS is not set
-CONFIG_MPC834x=y
+# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
+CONFIG_PPC_MPC834x=y
+CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
@@ -155,7 +175,6 @@ CONFIG_MPC834x=y
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
@@ -171,12 +190,16 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -195,11 +218,7 @@ CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
@@ -248,6 +267,7 @@ CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -303,6 +323,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -427,7 +448,7 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
@@ -435,6 +456,8 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
# CONFIG_BLK_DEV_IDE is not set
@@ -503,6 +526,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -533,6 +557,7 @@ CONFIG_SATA_SIL=y
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
+# CONFIG_SATA_FSL is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
@@ -556,6 +581,7 @@ CONFIG_SATA_SIL=y
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
@@ -599,7 +625,6 @@ CONFIG_NETDEVICES=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
@@ -615,6 +640,7 @@ CONFIG_CICADA_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_NET_ETHERNET is not set
@@ -623,6 +649,9 @@ CONFIG_NETDEV_1000=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -649,6 +678,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
@@ -671,7 +701,6 @@ CONFIG_NETDEV_10000=y
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -694,6 +723,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -767,14 +797,12 @@ CONFIG_I2C_MPC=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
CONFIG_SENSORS_PCF8574=y
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -803,6 +831,7 @@ CONFIG_SPI_MPC83xx=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -867,6 +896,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@@ -880,10 +910,10 @@ CONFIG_USB_DEVICE_CLASS=y
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
@@ -927,10 +957,6 @@ CONFIG_USB_MON=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
@@ -956,16 +982,9 @@ CONFIG_USB_MON=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
@@ -997,20 +1016,23 @@ CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
#
-# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@@ -1018,6 +1040,7 @@ CONFIG_RTC_DRV_DS1307=y
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -1043,12 +1066,10 @@ CONFIG_FS_MBCACHE=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -1094,8 +1115,10 @@ CONFIG_TMPFS=y
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -1182,7 +1205,6 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
@@ -1198,7 +1220,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
@@ -1212,6 +1233,7 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1225,6 +1247,7 @@ CONFIG_ENABLE_MUST_CHECK=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
@@ -1242,6 +1265,9 @@ CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -1256,11 +1282,14 @@ CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/mpc834x_itxgp_defconfig b/arch/powerpc/configs/mpc834x_itxgp_defconfig
index 67cb09cc3ac..b4e39cf82a8 100644
--- a/arch/powerpc/configs/mpc834x_itxgp_defconfig
+++ b/arch/powerpc/configs/mpc834x_itxgp_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:39 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:18 2008
#
# CONFIG_PPC64 is not set
@@ -14,8 +14,8 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_83xx=y
CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
@@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -66,15 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -86,11 +91,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -98,6 +105,13 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -125,6 +139,7 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
@@ -133,18 +148,23 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-# CONFIG_MPC8313_RDB is not set
+CONFIG_MPC83xx=y
+# CONFIG_MPC831x_RDB is not set
# CONFIG_MPC832x_MDS is not set
# CONFIG_MPC832x_RDB is not set
# CONFIG_MPC834x_MDS is not set
CONFIG_MPC834x_ITX=y
# CONFIG_MPC836x_MDS is not set
-CONFIG_MPC834x=y
+# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
+CONFIG_PPC_MPC834x=y
+CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
@@ -155,7 +175,6 @@ CONFIG_MPC834x=y
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
@@ -171,12 +190,16 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -195,11 +218,7 @@ CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
@@ -248,6 +267,7 @@ CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -303,6 +323,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -427,7 +448,7 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
@@ -435,6 +456,8 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -499,6 +522,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
@@ -529,7 +553,6 @@ CONFIG_NETDEVICES=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
@@ -545,6 +568,7 @@ CONFIG_CICADA_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_NET_ETHERNET is not set
@@ -553,6 +577,9 @@ CONFIG_NETDEV_1000=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -579,6 +606,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
@@ -601,7 +629,6 @@ CONFIG_NETDEV_10000=y
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -624,6 +651,7 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -697,14 +725,12 @@ CONFIG_I2C_MPC=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
CONFIG_SENSORS_PCF8574=y
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -733,6 +759,7 @@ CONFIG_SPI_MPC83xx=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -797,6 +824,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@@ -810,10 +838,10 @@ CONFIG_USB_DEVICE_CLASS=y
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
@@ -857,10 +885,6 @@ CONFIG_USB_MON=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
@@ -885,16 +909,9 @@ CONFIG_USB_MON=y
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
@@ -926,20 +943,23 @@ CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
#
-# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@@ -947,6 +967,7 @@ CONFIG_RTC_DRV_DS1307=y
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -972,12 +993,10 @@ CONFIG_FS_MBCACHE=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -1023,8 +1042,10 @@ CONFIG_TMPFS=y
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -1111,7 +1132,6 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
@@ -1127,7 +1147,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
@@ -1141,6 +1160,7 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1154,6 +1174,7 @@ CONFIG_ENABLE_MUST_CHECK=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
@@ -1171,6 +1192,9 @@ CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -1185,11 +1209,14 @@ CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/mpc834x_mds_defconfig b/arch/powerpc/configs/mpc834x_mds_defconfig
index 217539f3ece..9360144942f 100644
--- a/arch/powerpc/configs/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/mpc834x_mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:41 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:20 2008
#
# CONFIG_PPC64 is not set
@@ -14,8 +14,8 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_83xx=y
CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
@@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -66,15 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -86,11 +91,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -98,6 +105,13 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -125,6 +139,7 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
@@ -133,18 +148,23 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-# CONFIG_MPC8313_RDB is not set
+CONFIG_MPC83xx=y
+# CONFIG_MPC831x_RDB is not set
# CONFIG_MPC832x_MDS is not set
# CONFIG_MPC832x_RDB is not set
CONFIG_MPC834x_MDS=y
# CONFIG_MPC834x_ITX is not set
# CONFIG_MPC836x_MDS is not set
-CONFIG_MPC834x=y
+# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
+CONFIG_PPC_MPC834x=y
+CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
@@ -155,7 +175,6 @@ CONFIG_MPC834x=y
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
@@ -171,12 +190,16 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -195,11 +218,7 @@ CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
@@ -248,6 +267,7 @@ CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -303,6 +323,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -347,7 +368,7 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
@@ -355,6 +376,8 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -383,7 +406,6 @@ CONFIG_NETDEVICES=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
@@ -399,6 +421,7 @@ CONFIG_MARVELL_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -426,6 +449,7 @@ CONFIG_E100=y
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
@@ -437,6 +461,9 @@ CONFIG_NETDEV_1000=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -463,6 +490,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
@@ -475,7 +503,6 @@ CONFIG_NETDEV_10000=y
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -518,6 +545,7 @@ CONFIG_INPUT=y
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -591,14 +619,12 @@ CONFIG_I2C_MPC=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -623,6 +649,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -652,6 +679,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
@@ -661,9 +689,11 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -725,23 +755,22 @@ CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_FSL=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
+
+#
+# Conflicting RTC option has been selected, check GEN_RTC and RTC
+#
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
@@ -768,6 +797,7 @@ CONFIG_RTC_DRV_DS1374=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
@@ -777,9 +807,10 @@ CONFIG_RTC_DRV_DS1374=y
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@@ -787,6 +818,7 @@ CONFIG_RTC_DRV_DS1374=y
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -812,12 +844,10 @@ CONFIG_FS_MBCACHE=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -859,8 +889,10 @@ CONFIG_TMPFS=y
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -904,7 +936,6 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
@@ -920,7 +951,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
@@ -934,6 +964,7 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -947,6 +978,7 @@ CONFIG_ENABLE_MUST_CHECK=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
@@ -964,6 +996,9 @@ CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -978,11 +1013,14 @@ CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/mpc836x_mds_defconfig b/arch/powerpc/configs/mpc836x_mds_defconfig
index c44fc56263e..7c8b06046d5 100644
--- a/arch/powerpc/configs/mpc836x_mds_defconfig
+++ b/arch/powerpc/configs/mpc836x_mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:43 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:21 2008
#
# CONFIG_PPC64 is not set
@@ -14,8 +14,8 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_83xx=y
CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
@@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -66,15 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -86,11 +91,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -98,6 +105,13 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -125,6 +139,7 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
@@ -133,18 +148,22 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-# CONFIG_MPC8313_RDB is not set
+CONFIG_MPC83xx=y
+# CONFIG_MPC831x_RDB is not set
# CONFIG_MPC832x_MDS is not set
# CONFIG_MPC832x_RDB is not set
# CONFIG_MPC834x_MDS is not set
# CONFIG_MPC834x_ITX is not set
CONFIG_MPC836x_MDS=y
-CONFIG_PPC_MPC836x=y
+# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
+CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
@@ -156,7 +175,6 @@ CONFIG_PPC_MPC836x=y
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
CONFIG_QUICC_ENGINE=y
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
@@ -172,12 +190,16 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -196,11 +218,7 @@ CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
@@ -249,6 +267,7 @@ CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -304,6 +323,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -348,7 +368,7 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
@@ -356,6 +376,8 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -420,6 +442,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
@@ -450,7 +473,6 @@ CONFIG_NETDEVICES=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
@@ -466,6 +488,7 @@ CONFIG_MARVELL_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -487,6 +510,9 @@ CONFIG_NETDEV_1000=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -517,6 +543,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
@@ -530,7 +557,6 @@ CONFIG_NETDEV_10000=y
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -573,6 +599,7 @@ CONFIG_INPUT=y
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -592,6 +619,7 @@ CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_QE is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -646,14 +674,12 @@ CONFIG_I2C_MPC=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -678,6 +704,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -707,6 +734,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
@@ -716,9 +744,11 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -784,17 +814,18 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
+
+#
+# Conflicting RTC option has been selected, check GEN_RTC and RTC
+#
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
@@ -821,6 +852,7 @@ CONFIG_RTC_DRV_DS1374=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
@@ -830,9 +862,10 @@ CONFIG_RTC_DRV_DS1374=y
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@@ -840,6 +873,7 @@ CONFIG_RTC_DRV_DS1374=y
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -865,12 +899,10 @@ CONFIG_FS_MBCACHE=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -912,8 +944,10 @@ CONFIG_TMPFS=y
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -957,7 +991,6 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
CONFIG_UCC_FAST=y
CONFIG_UCC=y
@@ -975,7 +1008,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
@@ -989,6 +1021,7 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1002,6 +1035,7 @@ CONFIG_ENABLE_MUST_CHECK=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
@@ -1019,6 +1053,9 @@ CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -1033,12 +1070,15 @@ CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/mpc837x_mds_defconfig b/arch/powerpc/configs/mpc837x_mds_defconfig
index 4f49aee5da6..f377cde785b 100644
--- a/arch/powerpc/configs/mpc837x_mds_defconfig
+++ b/arch/powerpc/configs/mpc837x_mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Wed Oct 10 16:31:39 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:23 2008
#
# CONFIG_PPC64 is not set
@@ -14,16 +14,22 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_83xx=y
CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -61,12 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -79,17 +92,27 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -117,28 +140,32 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_EMBEDDED6xx is not set
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-# CONFIG_MPC8313_RDB is not set
+CONFIG_MPC83xx=y
+# CONFIG_MPC831x_RDB is not set
# CONFIG_MPC832x_MDS is not set
# CONFIG_MPC832x_RDB is not set
# CONFIG_MPC834x_MDS is not set
# CONFIG_MPC834x_ITX is not set
# CONFIG_MPC836x_MDS is not set
CONFIG_MPC837x_MDS=y
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
CONFIG_PPC_MPC837x=y
+CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
@@ -149,25 +176,31 @@ CONFIG_PPC_MPC837x=y
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
-CONFIG_FSL_SERDES=y
#
# Kernel options
#
# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -177,6 +210,7 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
@@ -185,11 +219,7 @@ CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
@@ -203,10 +233,6 @@ CONFIG_FSL_SOC=y
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
#
@@ -220,7 +246,7 @@ CONFIG_FSL_SOC=y
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
+CONFIG_TASK_SIZE=0xc0000000
CONFIG_BOOT_LOAD=0x00800000
#
@@ -238,6 +264,7 @@ CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -260,6 +287,7 @@ CONFIG_SYN_COOKIES=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -285,10 +313,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -296,6 +320,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -317,6 +342,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
@@ -334,11 +360,13 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -377,11 +405,13 @@ CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_MV is not set
CONFIG_SATA_FSL=y
# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
@@ -393,6 +423,7 @@ CONFIG_NETDEVICES=y
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
CONFIG_PHYLIB=y
#
@@ -407,10 +438,18 @@ CONFIG_MARVELL_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
CONFIG_GIANFAR=y
# CONFIG_GFAR_NAPI is not set
CONFIG_NETDEV_10000=y
@@ -423,7 +462,6 @@ CONFIG_NETDEV_10000=y
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -442,7 +480,6 @@ CONFIG_INPUT=y
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -488,14 +525,6 @@ CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
@@ -527,14 +556,12 @@ CONFIG_I2C_MPC=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -551,8 +578,6 @@ CONFIG_I2C_MPC=y
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
@@ -560,12 +585,13 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -588,6 +614,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
@@ -595,9 +622,25 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_83xx_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
@@ -614,16 +657,15 @@ CONFIG_DAB=y
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
#
# Sound
@@ -632,6 +674,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -641,28 +684,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -681,7 +709,6 @@ CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
@@ -689,12 +716,10 @@ CONFIG_FS_MBCACHE=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -722,7 +747,6 @@ CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@@ -737,14 +761,13 @@ CONFIG_RAMFS=y
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
@@ -787,17 +810,8 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
@@ -815,15 +829,10 @@ CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
-
-#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
@@ -831,6 +840,7 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
@@ -838,9 +848,11 @@ CONFIG_ENABLE_MUST_CHECK=y
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
@@ -857,6 +869,10 @@ CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -870,9 +886,14 @@ CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/mpc837x_rdb_defconfig b/arch/powerpc/configs/mpc837x_rdb_defconfig
index 91d291e3ee3..44093a0eaf8 100644
--- a/arch/powerpc/configs/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/mpc837x_rdb_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Thu Jan 24 20:04:39 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:24 2008
#
# CONFIG_PPC64 is not set
@@ -14,8 +14,8 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_83xx=y
CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
@@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -66,17 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -89,17 +92,26 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
@@ -128,6 +140,7 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
@@ -136,11 +149,12 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_MPC83xx=y
# CONFIG_MPC831x_RDB is not set
# CONFIG_MPC832x_MDS is not set
# CONFIG_MPC832x_RDB is not set
@@ -149,6 +163,7 @@ CONFIG_PPC_83xx=y
# CONFIG_MPC836x_MDS is not set
# CONFIG_MPC837x_MDS is not set
CONFIG_MPC837x_RDB=y
+# CONFIG_SBC834x is not set
CONFIG_PPC_MPC837x=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
@@ -161,7 +176,6 @@ CONFIG_IPIC=y
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
@@ -177,12 +191,16 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -201,11 +219,7 @@ CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
@@ -301,6 +315,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -340,11 +355,13 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -389,6 +406,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_MV is not set
CONFIG_SATA_FSL=y
# CONFIG_PATA_PLATFORM is not set
CONFIG_MD=y
@@ -425,6 +443,7 @@ CONFIG_MARVELL_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -435,6 +454,7 @@ CONFIG_MII=y
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
CONFIG_GIANFAR=y
CONFIG_GFAR_NAPI=y
# CONFIG_NETDEV_10000 is not set
@@ -447,7 +467,6 @@ CONFIG_GFAR_NAPI=y
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -542,14 +561,12 @@ CONFIG_I2C_MPC=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -574,6 +591,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
@@ -601,6 +619,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
@@ -608,9 +627,11 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -668,15 +689,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -702,12 +721,10 @@ CONFIG_FS_MBCACHE=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -749,8 +766,10 @@ CONFIG_TMPFS=y
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -813,10 +832,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
@@ -846,6 +861,7 @@ CONFIG_ASYNC_XOR=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
@@ -863,6 +879,9 @@ CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -877,11 +896,13 @@ CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index a9807f083bc..1f6cf68e89f 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Mon Jan 28 13:14:19 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:25 2008
#
# CONFIG_PPC64 is not set
@@ -15,6 +15,7 @@ CONFIG_6xx=y
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
@@ -28,6 +29,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -65,17 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -88,17 +92,26 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
@@ -127,6 +140,7 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
@@ -135,8 +149,8 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
@@ -181,13 +195,17 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -206,11 +224,7 @@ CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
@@ -255,6 +269,7 @@ CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -310,6 +325,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -349,11 +365,13 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -398,6 +416,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_MV is not set
CONFIG_SATA_FSL=y
# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
@@ -424,6 +443,7 @@ CONFIG_VITESSE_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
CONFIG_ICPLUS_PHY=y
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -434,9 +454,14 @@ CONFIG_MII=y
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
CONFIG_GIANFAR=y
# CONFIG_GFAR_NAPI is not set
CONFIG_UCC_GETH=y
+# CONFIG_UGETH_NAPI is not set
+# CONFIG_UGETH_MAGIC_PACKET is not set
+# CONFIG_UGETH_FILTERING is not set
+# CONFIG_UGETH_TX_ON_DEMAND is not set
CONFIG_NETDEV_10000=y
#
@@ -447,7 +472,6 @@ CONFIG_NETDEV_10000=y
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -543,14 +567,12 @@ CONFIG_I2C_MPC=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -575,6 +597,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
@@ -602,6 +625,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
@@ -609,9 +633,11 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -665,21 +691,17 @@ CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_FSL=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -705,12 +727,10 @@ CONFIG_FS_MBCACHE=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -752,8 +772,10 @@ CONFIG_TMPFS=y
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -801,6 +823,8 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+CONFIG_UCC_FAST=y
+CONFIG_UCC=y
#
# Library routines
@@ -816,10 +840,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
@@ -845,6 +865,7 @@ CONFIG_ENABLE_MUST_CHECK=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
@@ -862,6 +883,9 @@ CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -876,12 +900,14 @@ CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/mpc8540_ads_defconfig b/arch/powerpc/configs/mpc8540_ads_defconfig
index 3791e29e7d0..b998539da86 100644
--- a/arch/powerpc/configs/mpc8540_ads_defconfig
+++ b/arch/powerpc/configs/mpc8540_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:44 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:25 2008
#
# CONFIG_PPC64 is not set
@@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_85xx=y
CONFIG_E500=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
# CONFIG_PPC_MM_SLICES is not set
@@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -67,15 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -89,11 +94,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -101,6 +108,13 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -123,22 +137,30 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
CONFIG_MPC8540_ADS=y
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
-CONFIG_MPC8540=y
-CONFIG_MPC85xx=y
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
+# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
@@ -165,13 +187,17 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -190,18 +216,13 @@ CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
@@ -238,6 +259,7 @@ CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -293,6 +315,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -334,11 +357,13 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -373,6 +398,7 @@ CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -383,6 +409,7 @@ CONFIG_MII=y
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
CONFIG_GIANFAR=y
CONFIG_GFAR_NAPI=y
CONFIG_NETDEV_10000=y
@@ -395,7 +422,6 @@ CONFIG_NETDEV_10000=y
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -489,6 +515,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -538,15 +565,13 @@ CONFIG_USB_SUPPORT=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -572,12 +597,10 @@ CONFIG_FS_MBCACHE=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -619,8 +642,10 @@ CONFIG_TMPFS=y
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -661,7 +686,6 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
@@ -677,7 +701,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
@@ -696,6 +719,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -708,8 +732,8 @@ CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -725,5 +749,48 @@ CONFIG_FORCED_INLINING=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/mpc8544_ds_defconfig b/arch/powerpc/configs/mpc8544_ds_defconfig
index 18623a8ee75..c75b6aee76d 100644
--- a/arch/powerpc/configs/mpc8544_ds_defconfig
+++ b/arch/powerpc/configs/mpc8544_ds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:46 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:26 2008
#
# CONFIG_PPC64 is not set
@@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_85xx=y
CONFIG_E500=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
# CONFIG_PPC_MM_SLICES is not set
@@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -68,17 +69,21 @@ CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -92,11 +97,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -104,6 +111,14 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -131,21 +146,30 @@ CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
CONFIG_MPC85xx_DS=y
-CONFIG_MPC85xx=y
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
+# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC_I8259=y
@@ -172,13 +196,17 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -197,11 +225,7 @@ CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
@@ -252,6 +276,7 @@ CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
@@ -335,6 +360,7 @@ CONFIG_SCTP_HMAC_MD5=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -383,7 +409,7 @@ CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
@@ -391,6 +417,8 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -456,6 +484,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -486,6 +515,7 @@ CONFIG_SATA_AHCI=y
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
+# CONFIG_SATA_FSL is not set
CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
@@ -509,6 +539,7 @@ CONFIG_PATA_ALI=y
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
@@ -542,7 +573,6 @@ CONFIG_DUMMY=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
@@ -558,6 +588,7 @@ CONFIG_VITESSE_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -579,6 +610,9 @@ CONFIG_NETDEV_1000=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -605,6 +639,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
@@ -627,7 +662,6 @@ CONFIG_NETDEV_10000=y
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -678,6 +712,7 @@ CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -756,14 +791,12 @@ CONFIG_I2C_MPC=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -779,6 +812,7 @@ CONFIG_SENSORS_EEPROM=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -803,6 +837,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#
+# CONFIG_TTPCI_EEPROM is not set
+# CONFIG_DVB_BUDGET_CORE is not set
#
# Supported USB Adapters
@@ -888,11 +924,13 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
# CONFIG_DVB_PLL is not set
# CONFIG_DVB_TDA826X is not set
# CONFIG_DVB_TDA827X is not set
+# CONFIG_DVB_TDA18271 is not set
# CONFIG_DVB_TUNER_QT1010 is not set
# CONFIG_DVB_TUNER_MT2060 is not set
# CONFIG_DVB_TUNER_MT2266 is not set
# CONFIG_DVB_TUNER_MT2131 is not set
# CONFIG_DVB_TUNER_DIB0070 is not set
+# CONFIG_DVB_TUNER_XC5000 is not set
#
# Miscellaneous devices
@@ -970,6 +1008,7 @@ CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
@@ -995,6 +1034,7 @@ CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
@@ -1012,6 +1052,7 @@ CONFIG_SND_INTEL8X0=y
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
@@ -1041,6 +1082,10 @@ CONFIG_SND_INTEL8X0=y
#
#
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
@@ -1063,6 +1108,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@@ -1076,9 +1122,10 @@ CONFIG_USB_DEVICE_CLASS=y
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_FSL is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
@@ -1129,10 +1176,6 @@ CONFIG_USB_MON=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
@@ -1158,21 +1201,18 @@ CONFIG_USB_MON=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
+
+#
+# Conflicting RTC option has been selected, check GEN_RTC and RTC
+#
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
@@ -1199,6 +1239,7 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
@@ -1208,9 +1249,10 @@ CONFIG_RTC_INTF_DEV=y
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@@ -1218,6 +1260,7 @@ CONFIG_RTC_DRV_CMOS=y
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -1243,12 +1286,10 @@ CONFIG_FS_MBCACHE=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -1300,8 +1341,10 @@ CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_CRAMFS=y
CONFIG_VXFS_FS=m
+# CONFIG_MINIX_FS is not set
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
+# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
@@ -1393,7 +1436,6 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
@@ -1410,7 +1452,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
@@ -1429,6 +1470,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1442,9 +1484,9 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -1463,6 +1505,7 @@ CONFIG_FORCED_INLINING=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
@@ -1481,6 +1524,9 @@ CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -1495,11 +1541,14 @@ CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/mpc8560_ads_defconfig b/arch/powerpc/configs/mpc8560_ads_defconfig
index 51f9693bacd..851ac911561 100644
--- a/arch/powerpc/configs/mpc8560_ads_defconfig
+++ b/arch/powerpc/configs/mpc8560_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:48 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:27 2008
#
# CONFIG_PPC64 is not set
@@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_85xx=y
CONFIG_E500=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
# CONFIG_PPC_MM_SLICES is not set
@@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -67,15 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -89,11 +94,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -101,6 +108,13 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -123,22 +137,30 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
# CONFIG_MPC8540_ADS is not set
CONFIG_MPC8560_ADS=y
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
-CONFIG_MPC8560=y
-CONFIG_MPC85xx=y
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
+# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
@@ -167,13 +189,17 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -192,11 +218,7 @@ CONFIG_VIRT_TO_BUS=y
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
@@ -246,6 +268,7 @@ CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -301,6 +324,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -347,7 +371,7 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
@@ -355,6 +379,8 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -383,7 +409,6 @@ CONFIG_NETDEVICES=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
@@ -399,6 +424,7 @@ CONFIG_DAVICOM_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -426,6 +452,9 @@ CONFIG_E1000=y
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -452,6 +481,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
@@ -464,7 +494,6 @@ CONFIG_NETDEV_10000=y
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -507,6 +536,7 @@ CONFIG_INPUT=y
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -567,6 +597,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -619,16 +650,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -654,12 +683,10 @@ CONFIG_FS_MBCACHE=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -701,8 +728,10 @@ CONFIG_TMPFS=y
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -743,7 +772,6 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
@@ -759,7 +787,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
@@ -778,6 +805,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -790,8 +818,8 @@ CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -808,6 +836,50 @@ CONFIG_FORCED_INLINING=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/mpc8568mds_defconfig b/arch/powerpc/configs/mpc8568mds_defconfig
index f51b58ae329..e7da4b96cde 100644
--- a/arch/powerpc/configs/mpc8568mds_defconfig
+++ b/arch/powerpc/configs/mpc8568mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:50 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:28 2008
#
# CONFIG_PPC64 is not set
@@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_85xx=y
CONFIG_E500=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
# CONFIG_PPC_MM_SLICES is not set
@@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -67,15 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -87,11 +92,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -99,6 +106,13 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -126,21 +140,30 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
CONFIG_MPC85xx_MDS=y
# CONFIG_MPC85xx_DS is not set
-CONFIG_MPC85xx=y
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
+# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
@@ -168,13 +191,17 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -193,11 +220,7 @@ CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
@@ -247,6 +270,7 @@ CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -302,6 +326,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -348,7 +373,7 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
@@ -356,6 +381,8 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -420,6 +447,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
@@ -450,7 +478,6 @@ CONFIG_NETDEVICES=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
@@ -466,6 +493,7 @@ CONFIG_MARVELL_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -487,6 +515,9 @@ CONFIG_NETDEV_1000=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -514,6 +545,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
@@ -527,7 +559,6 @@ CONFIG_NETDEV_10000=y
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -570,6 +601,7 @@ CONFIG_INPUT=y
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -590,6 +622,7 @@ CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_QE is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -644,14 +677,12 @@ CONFIG_I2C_MPC=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -676,6 +707,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -705,6 +737,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
@@ -714,9 +747,11 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -782,17 +817,18 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
+
+#
+# Conflicting RTC option has been selected, check GEN_RTC and RTC
+#
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
@@ -819,6 +855,7 @@ CONFIG_RTC_DRV_DS1374=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
@@ -828,9 +865,10 @@ CONFIG_RTC_DRV_DS1374=y
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@@ -838,6 +876,7 @@ CONFIG_RTC_DRV_DS1374=y
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -863,12 +902,10 @@ CONFIG_FS_MBCACHE=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -910,8 +947,10 @@ CONFIG_TMPFS=y
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -955,7 +994,6 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
@@ -971,7 +1009,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
@@ -990,6 +1027,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1002,9 +1040,9 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -1023,6 +1061,7 @@ CONFIG_PPC_EARLY_DEBUG=y
# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
# CONFIG_PPC_EARLY_DEBUG_44x is not set
+# CONFIG_PPC_EARLY_DEBUG_40x is not set
# CONFIG_PPC_EARLY_DEBUG_CPM is not set
#
@@ -1034,6 +1073,7 @@ CONFIG_PPC_EARLY_DEBUG=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
@@ -1051,6 +1091,9 @@ CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -1065,12 +1108,15 @@ CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/mpc8572_ds_defconfig b/arch/powerpc/configs/mpc8572_ds_defconfig
index b40802d17e0..460afe99c65 100644
--- a/arch/powerpc/configs/mpc8572_ds_defconfig
+++ b/arch/powerpc/configs/mpc8572_ds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:52 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:29 2008
#
# CONFIG_PPC64 is not set
@@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_85xx=y
CONFIG_E500=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
# CONFIG_PPC_MM_SLICES is not set
@@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -68,17 +69,21 @@ CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -92,11 +97,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -104,6 +111,14 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -131,21 +146,30 @@ CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
CONFIG_MPC85xx_DS=y
-CONFIG_MPC85xx=y
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
+# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC_I8259=y
@@ -172,13 +196,17 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -197,11 +225,7 @@ CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
@@ -252,6 +276,7 @@ CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
@@ -335,6 +360,7 @@ CONFIG_SCTP_HMAC_MD5=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -383,7 +409,7 @@ CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
@@ -391,6 +417,8 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -456,6 +484,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -486,6 +515,7 @@ CONFIG_SATA_AHCI=y
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
+# CONFIG_SATA_FSL is not set
CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
@@ -509,6 +539,7 @@ CONFIG_PATA_ALI=y
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
@@ -542,7 +573,6 @@ CONFIG_DUMMY=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
@@ -558,6 +588,7 @@ CONFIG_VITESSE_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -579,6 +610,9 @@ CONFIG_NETDEV_1000=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -605,6 +639,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
@@ -627,7 +662,6 @@ CONFIG_NETDEV_10000=y
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -678,6 +712,7 @@ CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -756,14 +791,12 @@ CONFIG_I2C_MPC=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -779,6 +812,7 @@ CONFIG_SENSORS_EEPROM=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -803,6 +837,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#
+# CONFIG_TTPCI_EEPROM is not set
+# CONFIG_DVB_BUDGET_CORE is not set
#
# Supported USB Adapters
@@ -888,11 +924,13 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
# CONFIG_DVB_PLL is not set
# CONFIG_DVB_TDA826X is not set
# CONFIG_DVB_TDA827X is not set
+# CONFIG_DVB_TDA18271 is not set
# CONFIG_DVB_TUNER_QT1010 is not set
# CONFIG_DVB_TUNER_MT2060 is not set
# CONFIG_DVB_TUNER_MT2266 is not set
# CONFIG_DVB_TUNER_MT2131 is not set
# CONFIG_DVB_TUNER_DIB0070 is not set
+# CONFIG_DVB_TUNER_XC5000 is not set
#
# Miscellaneous devices
@@ -970,6 +1008,7 @@ CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
@@ -995,6 +1034,7 @@ CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
@@ -1012,6 +1052,7 @@ CONFIG_SND_INTEL8X0=y
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
@@ -1041,6 +1082,10 @@ CONFIG_SND_INTEL8X0=y
#
#
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
@@ -1063,6 +1108,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@@ -1076,9 +1122,10 @@ CONFIG_USB_DEVICE_CLASS=y
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_FSL is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
@@ -1129,10 +1176,6 @@ CONFIG_USB_MON=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
@@ -1158,21 +1201,18 @@ CONFIG_USB_MON=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
+
+#
+# Conflicting RTC option has been selected, check GEN_RTC and RTC
+#
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
@@ -1199,6 +1239,7 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
@@ -1208,9 +1249,10 @@ CONFIG_RTC_INTF_DEV=y
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@@ -1218,6 +1260,7 @@ CONFIG_RTC_DRV_CMOS=y
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -1243,12 +1286,10 @@ CONFIG_FS_MBCACHE=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -1300,8 +1341,10 @@ CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_CRAMFS=y
CONFIG_VXFS_FS=m
+# CONFIG_MINIX_FS is not set
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
+# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
@@ -1393,7 +1436,6 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
@@ -1410,7 +1452,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
@@ -1429,6 +1470,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1442,9 +1484,9 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -1463,6 +1505,7 @@ CONFIG_FORCED_INLINING=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
@@ -1481,6 +1524,9 @@ CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -1495,11 +1541,14 @@ CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/mpc85xx_cds_defconfig b/arch/powerpc/configs/mpc85xx_cds_defconfig
index 2f9ad589b00..a469fe91881 100644
--- a/arch/powerpc/configs/mpc85xx_cds_defconfig
+++ b/arch/powerpc/configs/mpc85xx_cds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:54 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:30 2008
#
# CONFIG_PPC64 is not set
@@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_85xx=y
CONFIG_E500=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
# CONFIG_PPC_MM_SLICES is not set
@@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -67,15 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -89,11 +94,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -101,6 +108,13 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -123,22 +137,30 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
CONFIG_MPC85xx_CDS=y
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
-CONFIG_MPC8540=y
-CONFIG_MPC85xx=y
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
+# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC_I8259=y
@@ -165,13 +187,17 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -190,11 +216,7 @@ CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
@@ -244,6 +266,7 @@ CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -299,6 +322,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -345,7 +369,7 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
@@ -353,12 +377,14 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_IDEDISK is not set
@@ -374,12 +400,12 @@ CONFIG_IDE_PROC_FS=y
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
@@ -410,7 +436,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
@@ -441,7 +466,6 @@ CONFIG_NETDEVICES=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
@@ -457,6 +481,7 @@ CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -480,6 +505,9 @@ CONFIG_E1000=y
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -506,6 +534,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
@@ -518,7 +547,6 @@ CONFIG_NETDEV_10000=y
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -561,6 +589,7 @@ CONFIG_INPUT=y
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -620,6 +649,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -672,16 +702,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -707,12 +735,10 @@ CONFIG_FS_MBCACHE=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -754,8 +780,10 @@ CONFIG_TMPFS=y
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -796,7 +824,6 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
@@ -812,7 +839,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
@@ -831,6 +857,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -843,8 +870,8 @@ CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -860,5 +887,49 @@ CONFIG_FORCED_INLINING=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index 90e38ba3832..615e4c1bf73 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Mon Jan 28 13:12:07 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:31 2008
#
# CONFIG_PPC64 is not set
@@ -17,6 +17,7 @@ CONFIG_PPC_85xx=y
CONFIG_E500=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
# CONFIG_PPC_MM_SLICES is not set
@@ -29,6 +30,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -67,17 +69,21 @@ CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -91,11 +97,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -103,6 +111,13 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
@@ -131,12 +146,13 @@ CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
@@ -184,13 +200,17 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -209,11 +229,7 @@ CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
@@ -264,6 +280,7 @@ CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
@@ -347,6 +364,7 @@ CONFIG_SCTP_HMAC_MD5=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -395,7 +413,7 @@ CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
@@ -403,6 +421,8 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -468,6 +488,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -522,6 +543,7 @@ CONFIG_PATA_ALI=y
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
@@ -570,6 +592,7 @@ CONFIG_VITESSE_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -592,7 +615,9 @@ CONFIG_NETDEV_1000=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -620,6 +645,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
@@ -642,7 +668,6 @@ CONFIG_NETDEV_10000=y
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -693,6 +718,7 @@ CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -773,14 +799,12 @@ CONFIG_I2C_MPC=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -796,6 +820,7 @@ CONFIG_SENSORS_EEPROM=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -820,6 +845,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#
+# CONFIG_TTPCI_EEPROM is not set
+# CONFIG_DVB_BUDGET_CORE is not set
#
# Supported USB Adapters
@@ -905,11 +932,13 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
# CONFIG_DVB_PLL is not set
# CONFIG_DVB_TDA826X is not set
# CONFIG_DVB_TDA827X is not set
+# CONFIG_DVB_TDA18271 is not set
# CONFIG_DVB_TUNER_QT1010 is not set
# CONFIG_DVB_TUNER_MT2060 is not set
# CONFIG_DVB_TUNER_MT2266 is not set
# CONFIG_DVB_TUNER_MT2131 is not set
# CONFIG_DVB_TUNER_DIB0070 is not set
+# CONFIG_DVB_TUNER_XC5000 is not set
#
# Miscellaneous devices
@@ -987,6 +1016,7 @@ CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
@@ -1012,6 +1042,7 @@ CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
@@ -1029,6 +1060,7 @@ CONFIG_SND_INTEL8X0=y
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
@@ -1058,6 +1090,10 @@ CONFIG_SND_INTEL8X0=y
#
#
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
@@ -1080,6 +1116,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@@ -1093,9 +1130,10 @@ CONFIG_USB_DEVICE_CLASS=y
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_FSL is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
@@ -1146,10 +1184,6 @@ CONFIG_USB_MON=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
@@ -1175,21 +1209,18 @@ CONFIG_USB_MON=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
+
+#
+# Conflicting RTC option has been selected, check GEN_RTC and RTC
+#
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
@@ -1216,6 +1247,7 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
@@ -1225,9 +1257,10 @@ CONFIG_RTC_INTF_DEV=y
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@@ -1235,6 +1268,7 @@ CONFIG_RTC_DRV_CMOS=y
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -1260,12 +1294,10 @@ CONFIG_FS_MBCACHE=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -1317,8 +1349,10 @@ CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_CRAMFS=y
CONFIG_VXFS_FS=m
+# CONFIG_MINIX_FS is not set
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
+# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
@@ -1426,7 +1460,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
@@ -1445,6 +1478,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1458,9 +1492,9 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -1480,6 +1514,7 @@ CONFIG_FORCED_INLINING=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
@@ -1498,6 +1533,9 @@ CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -1512,12 +1550,15 @@ CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/mpc8610_hpcd_defconfig b/arch/powerpc/configs/mpc8610_hpcd_defconfig
index 2500ef42959..9270afe7594 100644
--- a/arch/powerpc/configs/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/mpc8610_hpcd_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:56 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:33 2008
#
# CONFIG_PPC64 is not set
@@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -65,16 +66,20 @@ CONFIG_LOCALVERSION=""
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -88,11 +93,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -100,6 +107,13 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -122,6 +136,7 @@ CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
@@ -130,14 +145,15 @@ CONFIG_DEFAULT_IOSCHED="deadline"
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
CONFIG_PPC_86xx=y
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
# CONFIG_MPC8641_HPCN is not set
CONFIG_MPC8610_HPCD=y
CONFIG_MPC8610=y
+# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
@@ -148,7 +164,6 @@ CONFIG_MPIC=y
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
@@ -164,12 +179,16 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -188,10 +207,7 @@ CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
-# CONFIG_WANT_DEVICE_TREE is not set
CONFIG_ISA_DMA_API=y
#
@@ -243,6 +259,7 @@ CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -311,6 +328,7 @@ CONFIG_IPV6_SIT=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -357,7 +375,7 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
@@ -365,6 +383,8 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
# CONFIG_BLK_DEV_IDE is not set
@@ -432,6 +452,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -462,6 +483,7 @@ CONFIG_SATA_AHCI=y
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
+# CONFIG_SATA_FSL is not set
CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
@@ -485,6 +507,7 @@ CONFIG_PATA_ALI=y
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
@@ -518,7 +541,6 @@ CONFIG_DUMMY=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
@@ -534,6 +556,7 @@ CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -574,6 +597,7 @@ CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
@@ -585,6 +609,9 @@ CONFIG_NETDEV_1000=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -610,6 +637,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
@@ -623,7 +651,6 @@ CONFIG_NETDEV_10000=y
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -674,6 +701,7 @@ CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -748,14 +776,12 @@ CONFIG_I2C_MPC=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -771,6 +797,7 @@ CONFIG_I2C_MPC=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -859,6 +886,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
@@ -884,6 +912,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
@@ -901,6 +930,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
@@ -929,6 +959,10 @@ CONFIG_SND_SOC_MPC8610_HPCD=y
CONFIG_SND_SOC_CS4270=y
CONFIG_SND_SOC_CS4270_VD33_ERRATA=y
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
@@ -942,16 +976,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -977,11 +1009,9 @@ CONFIG_FS_MBCACHE=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -1023,8 +1053,10 @@ CONFIG_TMPFS=y
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -1114,7 +1146,6 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
@@ -1130,7 +1161,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
@@ -1149,6 +1179,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1162,8 +1193,8 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -1179,5 +1210,49 @@ CONFIG_FORCED_INLINING=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/mpc8641_hpcn_defconfig b/arch/powerpc/configs/mpc8641_hpcn_defconfig
index ff092fc4c6b..994e7681796 100644
--- a/arch/powerpc/configs/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/mpc8641_hpcn_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:58 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:34 2008
#
# CONFIG_PPC64 is not set
@@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -68,17 +69,21 @@ CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -92,11 +97,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -104,6 +111,14 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -132,6 +147,7 @@ CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
@@ -140,14 +156,15 @@ CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
CONFIG_PPC_86xx=y
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
CONFIG_MPC8641_HPCN=y
# CONFIG_MPC8610_HPCD is not set
CONFIG_MPC8641=y
+# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC_I8259=y
@@ -158,7 +175,6 @@ CONFIG_PPC_I8259=y
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
CONFIG_FSL_ULI1575=y
#
@@ -174,13 +190,16 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_IRQ_ALL_CPUS is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -201,7 +220,6 @@ CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_SECCOMP=y
-# CONFIG_WANT_DEVICE_TREE is not set
CONFIG_ISA_DMA_API=y
#
@@ -252,6 +270,7 @@ CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
@@ -335,6 +354,7 @@ CONFIG_SCTP_HMAC_MD5=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -383,7 +403,7 @@ CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
@@ -391,6 +411,8 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -456,6 +478,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -486,6 +509,7 @@ CONFIG_SATA_AHCI=y
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
+# CONFIG_SATA_FSL is not set
CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
@@ -509,6 +533,7 @@ CONFIG_PATA_ALI=y
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
@@ -542,7 +567,6 @@ CONFIG_DUMMY=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
@@ -558,6 +582,7 @@ CONFIG_VITESSE_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -579,6 +604,9 @@ CONFIG_NETDEV_1000=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -605,6 +633,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
@@ -627,7 +656,6 @@ CONFIG_NETDEV_10000=y
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -678,6 +706,7 @@ CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -756,14 +785,12 @@ CONFIG_I2C_MPC=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -779,6 +806,7 @@ CONFIG_SENSORS_EEPROM=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -803,6 +831,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#
+# CONFIG_TTPCI_EEPROM is not set
+# CONFIG_DVB_BUDGET_CORE is not set
#
# Supported USB Adapters
@@ -888,11 +918,13 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
# CONFIG_DVB_PLL is not set
# CONFIG_DVB_TDA826X is not set
# CONFIG_DVB_TDA827X is not set
+# CONFIG_DVB_TDA18271 is not set
# CONFIG_DVB_TUNER_QT1010 is not set
# CONFIG_DVB_TUNER_MT2060 is not set
# CONFIG_DVB_TUNER_MT2266 is not set
# CONFIG_DVB_TUNER_MT2131 is not set
# CONFIG_DVB_TUNER_DIB0070 is not set
+# CONFIG_DVB_TUNER_XC5000 is not set
#
# Miscellaneous devices
@@ -970,6 +1002,7 @@ CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
@@ -995,6 +1028,7 @@ CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
@@ -1012,6 +1046,7 @@ CONFIG_SND_INTEL8X0=y
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
@@ -1041,6 +1076,10 @@ CONFIG_SND_INTEL8X0=y
#
#
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
@@ -1063,6 +1102,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@@ -1076,9 +1116,10 @@ CONFIG_USB_DEVICE_CLASS=y
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_FSL is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
@@ -1129,10 +1170,6 @@ CONFIG_USB_MON=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
@@ -1158,21 +1195,18 @@ CONFIG_USB_MON=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
+
+#
+# Conflicting RTC option has been selected, check GEN_RTC and RTC
+#
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
@@ -1199,6 +1233,7 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
@@ -1208,9 +1243,10 @@ CONFIG_RTC_INTF_DEV=y
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@@ -1218,6 +1254,7 @@ CONFIG_RTC_DRV_CMOS=y
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -1243,12 +1280,10 @@ CONFIG_FS_MBCACHE=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -1300,8 +1335,10 @@ CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_CRAMFS=y
CONFIG_VXFS_FS=m
+# CONFIG_MINIX_FS is not set
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
+# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
@@ -1393,7 +1430,6 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
@@ -1410,7 +1446,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
@@ -1429,6 +1464,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1442,9 +1478,9 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -1463,6 +1499,7 @@ CONFIG_FORCED_INLINING=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
@@ -1481,6 +1518,9 @@ CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -1495,11 +1535,14 @@ CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig
index a7ef231f2ab..2d831db9ae5 100644
--- a/arch/powerpc/configs/mpc866_ads_defconfig
+++ b/arch/powerpc/configs/mpc866_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:59 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:35 2008
#
# CONFIG_PPC64 is not set
@@ -26,6 +26,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -62,15 +63,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
@@ -82,11 +87,13 @@ CONFIG_KALLSYMS=y
CONFIG_PRINTK=y
# CONFIG_BUG is not set
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_VM_EVENT_COUNTERS is not set
@@ -94,6 +101,13 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
@@ -116,12 +130,13 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
CONFIG_CPM1=y
@@ -129,6 +144,7 @@ CONFIG_CPM1=y
CONFIG_MPC86XADS=y
# CONFIG_MPC885ADS is not set
# CONFIG_PPC_EP88XC is not set
+# CONFIG_PPC_ADDER875 is not set
#
# MPC8xx CPM Options
@@ -145,6 +161,7 @@ CONFIG_NO_UCODE_PATCH=y
# CONFIG_I2C_SPI_UCODE_PATCH is not set
# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
@@ -155,7 +172,7 @@ CONFIG_NO_UCODE_PATCH=y
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
+CONFIG_PPC_CPM_NEW_BINDING=y
# CONFIG_FSL_ULI1575 is not set
CONFIG_CPM=y
@@ -172,13 +189,17 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -197,11 +218,7 @@ CONFIG_VIRT_TO_BUS=y
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
@@ -246,6 +263,7 @@ CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -301,6 +319,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -340,6 +359,8 @@ CONFIG_BLK_DEV_LOOP=y
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -374,11 +395,8 @@ CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
CONFIG_FIXED_PHY=y
-CONFIG_FIXED_MII_10_FDX=y
-CONFIG_FIXED_MII_100_FDX=y
-# CONFIG_FIXED_MII_1000_FDX is not set
-CONFIG_FIXED_MII_AMNT=1
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
@@ -392,6 +410,8 @@ CONFIG_FS_ENET_HAS_SCC=y
CONFIG_FS_ENET_HAS_FEC=y
CONFIG_FS_ENET_MDIO_FEC=y
CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_GIANFAR is not set
CONFIG_NETDEV_10000=y
#
@@ -402,7 +422,6 @@ CONFIG_NETDEV_10000=y
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -519,6 +538,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -568,15 +588,13 @@ CONFIG_USB_SUPPORT=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -604,12 +622,10 @@ CONFIG_FS_MBCACHE=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -651,8 +667,10 @@ CONFIG_TMPFS=y
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -699,7 +717,6 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
@@ -716,7 +733,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
@@ -730,6 +746,7 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_SAMPLES is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -739,6 +756,49 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig
index 22f8171d6d4..82151b9bba2 100644
--- a/arch/powerpc/configs/mpc885_ads_defconfig
+++ b/arch/powerpc/configs/mpc885_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:49:01 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:35 2008
#
# CONFIG_PPC64 is not set
@@ -26,6 +26,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -63,15 +64,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
@@ -84,11 +89,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
+CONFIG_COMPAT_BRK=y
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_VM_EVENT_COUNTERS is not set
@@ -96,6 +103,13 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
@@ -117,12 +131,13 @@ CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
CONFIG_CPM1=y
@@ -130,6 +145,7 @@ CONFIG_CPM1=y
# CONFIG_MPC86XADS is not set
CONFIG_MPC885ADS=y
# CONFIG_PPC_EP88XC is not set
+# CONFIG_PPC_ADDER875 is not set
#
# Freescale Ethernet driver platform-specific options
@@ -153,6 +169,7 @@ CONFIG_NO_UCODE_PATCH=y
# CONFIG_I2C_SPI_UCODE_PATCH is not set
# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
@@ -163,7 +180,6 @@ CONFIG_NO_UCODE_PATCH=y
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
CONFIG_PPC_CPM_NEW_BINDING=y
# CONFIG_FSL_ULI1575 is not set
CONFIG_CPM=y
@@ -181,6 +197,7 @@ CONFIG_HZ_100=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
@@ -188,7 +205,10 @@ CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_8XX_MINIMAL_FPEMU=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -207,11 +227,7 @@ CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="mpc885ads.dts"
CONFIG_ISA_DMA_API=y
#
@@ -308,6 +324,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -418,6 +435,7 @@ CONFIG_OF_DEVICE=y
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -452,6 +470,7 @@ CONFIG_DAVICOM_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -476,7 +495,6 @@ CONFIG_FS_ENET_MDIO_FEC=y
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -539,6 +557,7 @@ CONFIG_GEN_RTC=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -578,9 +597,11 @@ CONFIG_DAB=y
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -599,11 +620,9 @@ CONFIG_DAB=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -646,8 +665,10 @@ CONFIG_TMPFS=y
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -694,7 +715,6 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
@@ -709,7 +729,6 @@ CONFIG_ZLIB_INFLATE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
@@ -728,6 +747,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -738,8 +758,8 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig
index 797f0dfebde..09f306248f2 100644
--- a/arch/powerpc/configs/pasemi_defconfig
+++ b/arch/powerpc/configs/pasemi_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Tue Jan 15 10:26:10 2008
+# Linux kernel version: 2.6.25-rc6
+# Tue Mar 25 10:25:48 2008
#
CONFIG_PPC64=y
@@ -27,6 +27,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -67,17 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -91,11 +94,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -103,6 +108,15 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -130,6 +144,7 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
@@ -140,8 +155,8 @@ CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_PPC_86xx is not set
# CONFIG_PPC_PSERIES is not set
# CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
CONFIG_PPC_PASEMI=y
@@ -159,6 +174,7 @@ CONFIG_PPC_PASEMI_MDIO=y
# CONFIG_PPC_IBM_CELL_BLADE is not set
# CONFIG_PQ2ADS is not set
CONFIG_PPC_NATIVE=y
+# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
@@ -189,7 +205,6 @@ CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CPU Frequency drivers
#
CONFIG_PPC_PASEMI_CPUFREQ=y
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
@@ -204,16 +219,20 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_FORCE_MAX_ZONEORDER=9
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_IOMMU_VMERGE=y
+CONFIG_IOMMU_HELPER=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
# CONFIG_IRQ_ALL_CPUS is not set
@@ -236,12 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_PPC_HAS_HASH_64K=y
CONFIG_PPC_64K_PAGES=y
+# CONFIG_PPC_SUBPAGE_PROT is not set
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_SECCOMP is not set
-# CONFIG_WANT_DEVICE_TREE is not set
CONFIG_ISA_DMA_API=y
#
@@ -290,6 +309,7 @@ CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
@@ -346,6 +366,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -441,8 +462,10 @@ CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_CAFE is not set
+CONFIG_MTD_NAND_PASEMI=y
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_NAND_FSL_ELBC is not set
# CONFIG_MTD_ONENAND is not set
#
@@ -465,7 +488,7 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
@@ -473,11 +496,13 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
@@ -485,6 +510,7 @@ CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=y
@@ -500,7 +526,6 @@ CONFIG_IDE_PROC_FS=y
#
# PCI IDE chipsets support
#
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_AEC62XX is not set
@@ -528,7 +553,6 @@ CONFIG_IDE_PROC_FS=y
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
@@ -593,6 +617,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -646,6 +671,7 @@ CONFIG_ATA_GENERIC=y
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
@@ -699,7 +725,6 @@ CONFIG_DUMMY=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
@@ -715,6 +740,7 @@ CONFIG_MARVELL_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -742,6 +768,7 @@ CONFIG_NET_PCI=y
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
@@ -754,6 +781,9 @@ CONFIG_E1000=y
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -779,6 +809,7 @@ CONFIG_NETDEV_10000=y
CONFIG_PASEMI_MAC=y
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
@@ -802,7 +833,6 @@ CONFIG_PASEMI_MAC=y
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -861,6 +891,7 @@ CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -886,8 +917,7 @@ CONFIG_LEGACY_PTY_COUNT=4
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_PASEMI=y
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
+# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@@ -897,6 +927,7 @@ CONFIG_GEN_RTC_X=y
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
@@ -944,13 +975,12 @@ CONFIG_I2C_PASEMI=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -975,6 +1005,7 @@ CONFIG_HWMON_VID=y
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -1004,6 +1035,7 @@ CONFIG_SENSORS_LM90=y
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
@@ -1013,9 +1045,11 @@ CONFIG_SENSORS_LM90=y
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -1183,6 +1217,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
@@ -1208,6 +1243,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
@@ -1225,6 +1261,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
@@ -1259,6 +1296,10 @@ CONFIG_SND_USB_USX2Y=y
#
#
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
@@ -1280,6 +1321,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@@ -1293,17 +1335,14 @@ CONFIG_USB_DEVICEFS=y
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+# CONFIG_USB_OHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_SL811_HCD=y
@@ -1348,10 +1387,6 @@ CONFIG_USB_LIBUSUAL=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
@@ -1377,16 +1412,9 @@ CONFIG_USB_LIBUSUAL=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
@@ -1425,6 +1453,7 @@ CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
@@ -1434,9 +1463,10 @@ CONFIG_RTC_DRV_DS1307=y
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@@ -1444,6 +1474,7 @@ CONFIG_RTC_DRV_DS1307=y
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -1471,12 +1502,10 @@ CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
@@ -1536,8 +1565,10 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -1629,7 +1660,6 @@ CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
@@ -1647,11 +1677,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
@@ -1670,6 +1695,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1682,9 +1708,9 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-# CONFIG_FORCED_INLINING is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -1710,7 +1736,9 @@ CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
@@ -1729,6 +1757,9 @@ CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -1743,11 +1774,14 @@ CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig
index 5416be4419b..558b0d348d4 100644
--- a/arch/powerpc/configs/pmac32_defconfig
+++ b/arch/powerpc/configs/pmac32_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:49:05 2007
+# Linux kernel version: 2.6.25-rc6
+# Thu Mar 20 11:05:14 2008
#
# CONFIG_PPC64 is not set
@@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -49,6 +50,9 @@ CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -67,18 +71,22 @@ CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_USER_SCHED is not set
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -92,11 +100,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -104,6 +114,15 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -131,6 +150,7 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
@@ -141,16 +161,17 @@ CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_MPC5121_ADS is not set
# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
-# CONFIG_PPC_EFIKA is not set
-# CONFIG_PPC_LITE5200 is not set
CONFIG_PPC_PMAC=y
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
# CONFIG_EMBEDDED6xx is not set
CONFIG_PPC_NATIVE=y
+# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
@@ -181,7 +202,6 @@ CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_PMAC=y
CONFIG_PPC601_SYNC_FIX=y
# CONFIG_TAU is not set
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
@@ -197,12 +217,16 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -221,19 +245,19 @@ CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
CONFIG_SUSPEND=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
+CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_APM_EMULATION=y
CONFIG_SECCOMP=y
-# CONFIG_WANT_DEVICE_TREE is not set
CONFIG_ISA_DMA_API=y
#
@@ -300,6 +324,7 @@ CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
@@ -334,12 +359,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
-# CONFIG_NETFILTER_NETLINK is not set
-CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
# CONFIG_NF_CT_ACCT is not set
# CONFIG_NF_CONNTRACK_MARK is not set
@@ -355,6 +382,7 @@ CONFIG_NF_CONNTRACK_IRC=m
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set
CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
@@ -363,8 +391,10 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -374,14 +404,17 @@ CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
@@ -399,13 +432,10 @@ CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
@@ -416,7 +446,6 @@ CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
# CONFIG_NF_NAT_SNMP_BASIC is not set
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
@@ -426,7 +455,6 @@ CONFIG_NF_NAT_TFTP=m
# CONFIG_NF_NAT_H323 is not set
# CONFIG_NF_NAT_SIP is not set
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
@@ -444,9 +472,9 @@ CONFIG_IP_DCCP_ACKVEC=y
CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=m
-CONFIG_IP_DCCP_TFRC_LIB=m
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
#
# DCCP Kernel Hacking
@@ -474,6 +502,7 @@ CONFIG_NET_SCH_FIFO=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
CONFIG_IRDA=m
#
@@ -509,15 +538,6 @@ CONFIG_IRTTY_SIR=m
# CONFIG_KS959_DONGLE is not set
#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
@@ -563,8 +583,26 @@ CONFIG_CFG80211=m
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=m
-CONFIG_MAC80211_RCSIMPLE=y
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_SIMPLE is not set
+# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
+
+#
+# Selecting 'y' for an algorithm will
+#
+
+#
+# build the algorithm into mac80211.
+#
+CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_RC_SIMPLE is not set
CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
# CONFIG_MAC80211_DEBUG is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
@@ -610,7 +648,7 @@ CONFIG_BLK_DEV_UB=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
@@ -618,11 +656,13 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
@@ -630,6 +670,7 @@ CONFIG_BLK_DEV_IDEDISK=y
CONFIG_BLK_DEV_IDECS=m
# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=y
@@ -641,12 +682,12 @@ CONFIG_IDE_PROC_FS=y
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
@@ -680,7 +721,6 @@ CONFIG_BLK_DEV_SL82C105=y
CONFIG_BLK_DEV_IDE_PMAC=y
CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
CONFIG_BLK_DEV_IDEDMA_PMAC=y
-# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
@@ -754,6 +794,7 @@ CONFIG_SCSI_AIC7XXX_OLD=m
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
@@ -848,7 +889,6 @@ CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
@@ -880,6 +920,7 @@ CONFIG_PCNET32=y
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
@@ -891,6 +932,9 @@ CONFIG_NETDEV_1000=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -916,6 +960,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
@@ -941,12 +986,16 @@ CONFIG_PCMCIA_HERMES=m
# CONFIG_PCMCIA_WL3501 is not set
CONFIG_PRISM54=m
# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
CONFIG_P54_COMMON=m
# CONFIG_P54_USB is not set
# CONFIG_P54_PCI is not set
-# CONFIG_IWLWIFI is not set
+# CONFIG_ATH5K is not set
+# CONFIG_IWL4965 is not set
+# CONFIG_IWL3945 is not set
# CONFIG_HOSTAP is not set
CONFIG_B43=m
CONFIG_B43_PCI_AUTOSELECT=y
@@ -954,20 +1003,17 @@ CONFIG_B43_PCICORE_AUTOSELECT=y
# CONFIG_B43_PCMCIA is not set
CONFIG_B43_LEDS=y
# CONFIG_B43_DEBUG is not set
-CONFIG_B43_DMA=y
-CONFIG_B43_PIO=y
-CONFIG_B43_DMA_AND_PIO_MODE=y
-# CONFIG_B43_DMA_MODE is not set
-# CONFIG_B43_PIO_MODE is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
+# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
#
@@ -1005,7 +1051,6 @@ CONFIG_PPP_BSDCOMP=m
# CONFIG_SLIP is not set
CONFIG_SLHC=y
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -1068,6 +1113,7 @@ CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -1105,6 +1151,7 @@ CONFIG_GEN_RTC=y
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
@@ -1151,14 +1198,12 @@ CONFIG_I2C_POWERMAC=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -1179,6 +1224,7 @@ CONFIG_APM_POWER=y
# CONFIG_BATTERY_DS2760 is not set
CONFIG_BATTERY_PMU=y
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -1188,6 +1234,7 @@ CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
# CONFIG_SSB_DEBUG is not set
@@ -1372,6 +1419,7 @@ CONFIG_SND_DUMMY=m
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
@@ -1397,6 +1445,7 @@ CONFIG_SND_DUMMY=m
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
@@ -1414,6 +1463,7 @@ CONFIG_SND_DUMMY=m
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
@@ -1461,6 +1511,10 @@ CONFIG_SND_USB_AUDIO=m
#
#
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
@@ -1482,6 +1536,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@@ -1497,9 +1552,9 @@ CONFIG_USB_DYNAMIC_MINORS=y
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
-CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
@@ -1547,11 +1602,8 @@ CONFIG_USB_MON=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
@@ -1572,6 +1624,7 @@ CONFIG_USB_SERIAL_IPAQ=m
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
@@ -1603,7 +1656,6 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_DEBUG is not set
-CONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
@@ -1628,16 +1680,9 @@ CONFIG_USB_APPLEDISPLAY=m
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
@@ -1655,6 +1700,7 @@ CONFIG_LEDS_TRIGGER_IDE_DISK=y
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -1680,12 +1726,10 @@ CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
@@ -1733,8 +1777,10 @@ CONFIG_HFSPLUS_FS=m
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -1828,7 +1874,6 @@ CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
@@ -1850,11 +1895,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
@@ -1873,6 +1913,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1885,9 +1926,9 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-# CONFIG_FORCED_INLINING is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -1908,7 +1949,9 @@ CONFIG_BOOTX_TEXT=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
@@ -1927,6 +1970,9 @@ CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -1942,11 +1988,14 @@ CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 7695a4c66e8..880ab7ad10c 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Fri Dec 21 14:47:29 2007
+# Linux kernel version: 2.6.25-rc6
+# Thu Mar 20 11:06:28 2008
#
CONFIG_PPC64=y
@@ -28,6 +28,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -49,7 +50,9 @@ CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_PPC64_SWSUSP=y
+CONFIG_HIBERNATE_64=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
CONFIG_PPC_DCR_MMIO=y
CONFIG_PPC_DCR=y
@@ -72,8 +75,6 @@ CONFIG_POSIX_MQUEUE=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
@@ -82,13 +83,20 @@ CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_NS is not set
CONFIG_CPUSETS=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_USER_SCHED is not set
+# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUP_CPUACCT is not set
+# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -102,11 +110,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -114,6 +124,15 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -141,6 +160,7 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
@@ -163,8 +183,8 @@ CONFIG_VIODASD=y
CONFIG_VIOCD=m
CONFIG_VIOTAPE=m
CONFIG_VIOPATH=y
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
CONFIG_PPC_PMAC=y
CONFIG_PPC_PMAC64=y
CONFIG_PPC_MAPLE=y
@@ -176,7 +196,6 @@ CONFIG_PPC_PASEMI=y
CONFIG_PPC_PASEMI_IOMMU=y
# CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
CONFIG_PPC_PASEMI_MDIO=y
-CONFIG_ELECTRA_IDE=y
CONFIG_PPC_CELLEB=y
# CONFIG_PPC_PS3 is not set
CONFIG_PPC_CELL=y
@@ -193,11 +212,13 @@ CONFIG_CBE_RAS=y
CONFIG_CBE_THERM=m
CONFIG_CBE_CPUFREQ=m
CONFIG_CBE_CPUFREQ_PMI=m
+CONFIG_OPROFILE_CELL=y
# CONFIG_PQ2ADS is not set
CONFIG_PPC_NATIVE=y
CONFIG_UDBG_RTAS_CONSOLE=y
CONFIG_PPC_UDBG_BEAT=y
CONFIG_XICS=y
+# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC_I8259=y
@@ -236,7 +257,6 @@ CONFIG_CPU_FREQ_GOV_USERSPACE=y
#
CONFIG_CPU_FREQ_PMAC64=y
CONFIG_PPC_PASEMI_CPUFREQ=y
-# CONFIG_CPM2 is not set
CONFIG_AXON_RAM=m
# CONFIG_FSL_ULI1575 is not set
@@ -252,17 +272,21 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_IOMMU_VMERGE=y
+CONFIG_IOMMU_HELPER=y
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
@@ -294,11 +318,9 @@ CONFIG_PPC_HAS_HASH_64K=y
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
# CONFIG_PM is not set
-CONFIG_SUSPEND_SMP_POSSIBLE=y
-CONFIG_HIBERNATION_SMP_POSSIBLE=y
CONFIG_SECCOMP=y
-# CONFIG_WANT_DEVICE_TREE is not set
CONFIG_ISA_DMA_API=y
#
@@ -352,6 +374,7 @@ CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
@@ -375,7 +398,7 @@ CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=m
+CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -389,14 +412,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
-CONFIG_NETFILTER_NETLINK=y
+CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
@@ -422,8 +445,10 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -433,14 +458,17 @@ CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
@@ -458,13 +486,10 @@ CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
@@ -475,7 +500,6 @@ CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_FTP=m
@@ -486,7 +510,6 @@ CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
@@ -517,6 +540,7 @@ CONFIG_NET_CLS_ROUTE=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -563,7 +587,7 @@ CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
@@ -571,11 +595,13 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
@@ -583,6 +609,7 @@ CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
@@ -594,12 +621,12 @@ CONFIG_IDE_PROC_FS=y
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
@@ -634,7 +661,6 @@ CONFIG_BLK_DEV_CELLEB=y
CONFIG_BLK_DEV_IDE_PMAC=y
CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
CONFIG_BLK_DEV_IDEDMA_PMAC=y
-# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
@@ -701,6 +727,7 @@ CONFIG_SCSI_LOWLEVEL=y
CONFIG_SCSI_IBMVSCSI=y
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
@@ -760,6 +787,7 @@ CONFIG_SATA_SIL24=y
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
@@ -776,6 +804,7 @@ CONFIG_PATA_PCMCIA=y
# CONFIG_PATA_VIA is not set
CONFIG_PATA_WINBOND=y
CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_OF_PLATFORM is not set
CONFIG_PATA_SCC=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
@@ -847,7 +876,6 @@ CONFIG_BONDING=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
@@ -863,11 +891,8 @@ CONFIG_MARVELL_PHY=y
# CONFIG_SMSC_PHY is not set
CONFIG_BROADCOM_PHY=m
# CONFIG_ICPLUS_PHY is not set
-CONFIG_FIXED_PHY=m
-CONFIG_FIXED_MII_10_FDX=y
-CONFIG_FIXED_MII_100_FDX=y
-# CONFIG_FIXED_MII_1000_FDX is not set
-CONFIG_FIXED_MII_AMNT=1
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
@@ -899,6 +924,7 @@ CONFIG_E100=y
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
@@ -912,6 +938,9 @@ CONFIG_E1000=y
# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -940,6 +969,7 @@ CONFIG_IXGB=m
CONFIG_PASEMI_MAC=y
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
CONFIG_TR=y
CONFIG_IBMOL=y
# CONFIG_3C359 is not set
@@ -977,7 +1007,6 @@ CONFIG_PPPOE=m
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
@@ -1056,6 +1085,7 @@ CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -1103,6 +1133,7 @@ CONFIG_GEN_RTC=y
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
@@ -1151,13 +1182,12 @@ CONFIG_I2C_PASEMI=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -1173,6 +1203,7 @@ CONFIG_I2C_PASEMI=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -1337,6 +1368,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
@@ -1362,6 +1394,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
@@ -1379,6 +1412,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
@@ -1426,6 +1460,10 @@ CONFIG_SND_AOA_SOUNDBUS_I2S=m
#
#
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
@@ -1447,6 +1485,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@@ -1460,10 +1499,10 @@ CONFIG_USB_DEVICE_CLASS=y
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
@@ -1512,10 +1551,6 @@ CONFIG_USB_STORAGE=m
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
@@ -1541,16 +1576,9 @@ CONFIG_USB_APPLEDISPLAY=m
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
CONFIG_INFINIBAND=m
# CONFIG_INFINIBAND_USER_MAD is not set
@@ -1562,6 +1590,7 @@ CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_EHCA=m
# CONFIG_INFINIBAND_AMSO1100 is not set
# CONFIG_MLX4_INFINIBAND is not set
+# CONFIG_INFINIBAND_NES is not set
CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_CM is not set
CONFIG_INFINIBAND_IPOIB_DEBUG=y
@@ -1576,8 +1605,13 @@ CONFIG_EDAC=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_PASEMI=y
+# CONFIG_EDAC_CELL is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
+
+#
+# Conflicting RTC option has been selected, check GEN_RTC and RTC
+#
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
@@ -1604,6 +1638,7 @@ CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
@@ -1613,9 +1648,10 @@ CONFIG_RTC_DRV_DS1307=y
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@@ -1623,6 +1659,7 @@ CONFIG_RTC_DRV_DS1307=y
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -1665,12 +1702,10 @@ CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
@@ -1719,8 +1754,10 @@ CONFIG_HFSPLUS_FS=m
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -1821,7 +1858,6 @@ CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
@@ -1835,6 +1871,8 @@ CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
@@ -1843,11 +1881,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
@@ -1866,6 +1899,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1878,9 +1912,9 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
CONFIG_DEBUG_STACKOVERFLOW=y
@@ -1908,7 +1942,9 @@ CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
@@ -1921,12 +1957,15 @@ CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -1942,11 +1981,13 @@ CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_TEST=m
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig
index a3bfbb65a93..1383eb696a2 100644
--- a/arch/powerpc/configs/pq2fads_defconfig
+++ b/arch/powerpc/configs/pq2fads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc5
-# Thu Dec 13 22:39:18 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:36 2008
#
# CONFIG_PPC64 is not set
@@ -28,6 +28,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -69,9 +70,14 @@ CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
@@ -84,11 +90,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -96,6 +104,13 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -117,6 +132,7 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
@@ -125,15 +141,17 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_PPC_82xx=y
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_MPC8272_ADS is not set
CONFIG_PQ2FADS=y
+# CONFIG_EP8248E is not set
CONFIG_PQ2ADS=y
CONFIG_8260=y
CONFIG_PQ2_ADS_PCI_PIC=y
+# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
@@ -162,12 +180,16 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_FLATMEM=y
@@ -182,11 +204,7 @@ CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="pq2fads.dts"
CONFIG_ISA_DMA_API=y
#
@@ -206,6 +224,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
#
# Advanced setup
@@ -278,12 +297,13 @@ CONFIG_IPV6_SIT=y
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
@@ -293,6 +313,13 @@ CONFIG_NETFILTER=y
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
@@ -306,6 +333,7 @@ CONFIG_NETFILTER=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
@@ -314,6 +342,7 @@ CONFIG_NETFILTER=y
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
@@ -431,17 +460,20 @@ CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
@@ -455,7 +487,6 @@ CONFIG_IDE_PROC_FS=y
#
# PCI IDE chipsets support
#
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
@@ -481,7 +512,6 @@ CONFIG_IDE_PROC_FS=y
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
@@ -529,6 +559,7 @@ CONFIG_DAVICOM_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
CONFIG_MDIO_BITBANG=y
CONFIG_NET_ETHERNET=y
@@ -554,6 +585,8 @@ CONFIG_NETDEV_1000=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_R8169 is not set
@@ -564,6 +597,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_GIANFAR is not set
# CONFIG_QLA3XXX is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
@@ -576,6 +610,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
@@ -700,6 +735,7 @@ CONFIG_DEVPORT=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -749,10 +785,6 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_SELECTED=y
@@ -776,10 +808,13 @@ CONFIG_USB_ETH=y
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -803,12 +838,10 @@ CONFIG_FS_MBCACHE=y
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
@@ -836,6 +869,7 @@ CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -844,8 +878,10 @@ CONFIG_TMPFS=y
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -926,7 +962,6 @@ CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_UCC_SLOW is not set
#
# Library routines
@@ -944,7 +979,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
@@ -963,6 +997,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -975,8 +1010,8 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -995,6 +1030,7 @@ CONFIG_BDI_SWITCH=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
@@ -1008,6 +1044,9 @@ CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -1027,6 +1066,8 @@ CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig
index 46b2579d38b..f53d55bbdd7 100644
--- a/arch/powerpc/configs/prpmc2800_defconfig
+++ b/arch/powerpc/configs/prpmc2800_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:49:11 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:37 2008
#
# CONFIG_PPC64 is not set
@@ -31,6 +31,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -68,15 +69,23 @@ CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -89,11 +98,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -101,6 +112,13 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -123,6 +141,7 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
@@ -133,20 +152,22 @@ CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_MPC5121_ADS is not set
# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
-# CONFIG_PPC_EFIKA is not set
-# CONFIG_PPC_LITE5200 is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
CONFIG_EMBEDDED6xx=y
# CONFIG_LINKSTATION is not set
+# CONFIG_STORCENTER is not set
# CONFIG_MPC7448HPC2 is not set
# CONFIG_PPC_HOLLY is not set
CONFIG_PPC_PRPMC2800=y
CONFIG_MV64X60=y
+# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
@@ -158,7 +179,6 @@ CONFIG_MV64X60=y
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_TAU is not set
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
@@ -174,12 +194,16 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -199,11 +223,7 @@ CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="prpmc2800.dts"
CONFIG_ISA_DMA_API=y
#
@@ -253,6 +273,7 @@ CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -308,6 +329,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -341,6 +363,7 @@ CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_OF_PARTS is not set
#
# User Modules And Translation Layers
@@ -428,7 +451,7 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
@@ -436,11 +459,13 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
@@ -457,12 +482,12 @@ CONFIG_IDE_PROC_FS=y
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
@@ -493,7 +518,6 @@ CONFIG_BLK_DEV_PDC202XX_NEW=y
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
@@ -559,6 +583,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
@@ -612,6 +637,7 @@ CONFIG_SATA_MV=y
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
@@ -626,6 +652,7 @@ CONFIG_SATA_MV=y
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
@@ -646,7 +673,6 @@ CONFIG_NETDEVICES=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
@@ -662,6 +688,7 @@ CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -693,6 +720,7 @@ CONFIG_8139TOO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
@@ -706,6 +734,9 @@ CONFIG_E1000=y
# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -731,6 +762,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
@@ -753,7 +785,6 @@ CONFIG_NETDEV_10000=y
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -802,6 +833,7 @@ CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -872,14 +904,12 @@ CONFIG_I2C_MV64XXX=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -904,6 +934,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -933,6 +964,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
@@ -942,9 +974,11 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -1009,6 +1043,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@@ -1022,9 +1057,9 @@ CONFIG_USB_DEVICEFS=y
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
@@ -1061,10 +1096,6 @@ CONFIG_USB_MON=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
@@ -1090,21 +1121,18 @@ CONFIG_USB_MON=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
+
+#
+# Conflicting RTC option has been selected, check GEN_RTC and RTC
+#
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
@@ -1131,6 +1159,7 @@ CONFIG_RTC_DRV_MAX6900=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
@@ -1140,9 +1169,10 @@ CONFIG_RTC_DRV_MAX6900=y
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@@ -1150,6 +1180,7 @@ CONFIG_RTC_DRV_MAX6900=y
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -1175,12 +1206,10 @@ CONFIG_FS_MBCACHE=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -1223,8 +1252,10 @@ CONFIG_TMPFS=y
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -1269,7 +1300,6 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
@@ -1285,7 +1315,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
@@ -1299,6 +1328,7 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_SAMPLES is not set
# CONFIG_BOOTX_TEXT is not set
@@ -1310,5 +1340,49 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index 7994955c29d..7a64c564f6e 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Wed Jan 16 14:31:21 2008
+# Linux kernel version: 2.6.25-rc6
+# Thu Mar 20 11:07:04 2008
#
CONFIG_PPC64=y
@@ -28,6 +28,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,7 +52,6 @@ CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
-# CONFIG_PPC_OF_PLATFORM_PCI is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -68,17 +68,21 @@ CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_USER_SCHED is not set
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -92,17 +96,27 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
@@ -131,6 +145,7 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
@@ -141,8 +156,8 @@ CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_PPC_86xx is not set
# CONFIG_PPC_PSERIES is not set
# CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_PASEMI is not set
@@ -173,6 +188,7 @@ CONFIG_PPC_CELL=y
CONFIG_SPU_FS=y
CONFIG_SPU_BASE=y
# CONFIG_PQ2ADS is not set
+# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
@@ -184,7 +200,6 @@ CONFIG_SPU_BASE=y
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
@@ -199,15 +214,19 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_FORCE_MAX_ZONEORDER=13
# CONFIG_IOMMU_VMERGE is not set
+CONFIG_IOMMU_HELPER=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_IRQ_ALL_CPUS is not set
@@ -241,7 +260,6 @@ CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_SECCOMP is not set
-# CONFIG_WANT_DEVICE_TREE is not set
CONFIG_ISA_DMA_API=y
#
@@ -271,6 +289,7 @@ CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -338,6 +357,7 @@ CONFIG_IPV6_SIT=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
@@ -405,11 +425,13 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65535
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -472,7 +494,9 @@ CONFIG_MII=m
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
CONFIG_GELIC_NET=y
+CONFIG_GELIC_WIRELESS=y
# CONFIG_NETDEV_10000 is not set
#
@@ -482,9 +506,8 @@ CONFIG_GELIC_NET=y
CONFIG_WLAN_80211=y
# CONFIG_LIBERTAS is not set
# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_HOSTAP is not set
-CONFIG_ZD1211RW=m
-# CONFIG_ZD1211RW_DEBUG is not set
#
# USB Network Adapters
@@ -507,7 +530,6 @@ CONFIG_USB_NET_MCS7830=m
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -606,6 +628,7 @@ CONFIG_GEN_RTC=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -742,6 +765,10 @@ CONFIG_SND_PS3_DEFAULT_START_DELAY=2000
#
#
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
@@ -769,6 +796,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@@ -782,10 +810,10 @@ CONFIG_USB_DEVICEFS=y
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
@@ -833,10 +861,6 @@ CONFIG_USB_MON=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
@@ -862,19 +886,13 @@ CONFIG_USB_MON=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -900,8 +918,7 @@ CONFIG_FS_MBCACHE=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
@@ -910,7 +927,6 @@ CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
@@ -959,8 +975,10 @@ CONFIG_TMPFS=y
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -1036,7 +1054,6 @@ CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
@@ -1048,15 +1065,12 @@ CONFIG_BITREVERSE=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-# CONFIG_KPROBES is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
@@ -1087,9 +1101,9 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
CONFIG_DEBUG_STACKOVERFLOW=y
@@ -1108,7 +1122,9 @@ CONFIG_IRQSTACKS=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
@@ -1120,12 +1136,15 @@ CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -1140,11 +1159,13 @@ CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SALSA20=m
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 92bbf51ad4f..755aca72b52 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:49:15 2007
+# Linux kernel version: 2.6.25-rc6
+# Thu Mar 20 11:08:01 2008
#
CONFIG_PPC64=y
@@ -28,6 +28,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -71,8 +72,6 @@ CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
@@ -83,13 +82,20 @@ CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
CONFIG_CPUSETS=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_FAIR_USER_SCHED is not set
-CONFIG_FAIR_CGROUP_SCHED=y
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_USER_SCHED is not set
+# CONFIG_CGROUP_SCHED is not set
CONFIG_CGROUP_CPUACCT=y
+# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_PROC_PID_CPUSET=y
# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -103,11 +109,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -115,6 +123,16 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_MARKERS=y
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -142,6 +160,7 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
@@ -156,8 +175,8 @@ CONFIG_EEH=y
CONFIG_SCANLOG=m
CONFIG_LPARCFG=y
# CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_PASEMI is not set
@@ -170,6 +189,7 @@ CONFIG_LPARCFG=y
CONFIG_PPC_NATIVE=y
# CONFIG_UDBG_RTAS_CONSOLE is not set
CONFIG_XICS=y
+# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC_I8259=y
@@ -186,7 +206,6 @@ CONFIG_IBMEBUS=y
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
@@ -201,17 +220,21 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_IOMMU_VMERGE=y
+CONFIG_IOMMU_HELPER=y
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
@@ -245,9 +268,7 @@ CONFIG_SCHED_SMT=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_SMP_POSSIBLE=y
CONFIG_SECCOMP=y
-# CONFIG_WANT_DEVICE_TREE is not set
CONFIG_ISA_DMA_API=y
#
@@ -288,6 +309,7 @@ CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
@@ -322,14 +344,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
-CONFIG_NETFILTER_NETLINK=y
+CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
@@ -351,6 +373,7 @@ CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
@@ -361,14 +384,17 @@ CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
@@ -386,13 +412,10 @@ CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
@@ -403,7 +426,6 @@ CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
@@ -439,6 +461,7 @@ CONFIG_NET_CLS_ROUTE=y
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -493,7 +516,7 @@ CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
@@ -501,16 +524,19 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
@@ -522,12 +548,12 @@ CONFIG_IDE_PROC_FS=y
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
@@ -558,7 +584,6 @@ CONFIG_BLK_DEV_AMD74XX=y
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
@@ -627,6 +652,7 @@ CONFIG_SCSI_IBMVSCSI=y
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
@@ -685,6 +711,7 @@ CONFIG_ATA=y
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
@@ -699,6 +726,7 @@ CONFIG_ATA=y
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
CONFIG_PATA_WINBOND=y
+# CONFIG_PATA_PLATFORM is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
@@ -737,7 +765,6 @@ CONFIG_BONDING=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
@@ -769,6 +796,7 @@ CONFIG_E100=y
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
@@ -783,6 +811,9 @@ CONFIG_E1000=y
# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -811,6 +842,7 @@ CONFIG_S2IO=m
# CONFIG_PASEMI_MAC is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
CONFIG_TR=y
CONFIG_IBMOL=y
# CONFIG_3C359 is not set
@@ -847,7 +879,6 @@ CONFIG_PPPOE=m
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
@@ -927,6 +958,7 @@ CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -951,7 +983,6 @@ CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
CONFIG_HVC_DRIVER=y
CONFIG_HVC_CONSOLE=y
CONFIG_HVC_RTAS=y
@@ -1009,13 +1040,12 @@ CONFIG_I2C_ALGOBIT=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -1031,6 +1061,7 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -1166,6 +1197,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@@ -1179,9 +1211,9 @@ CONFIG_USB_DEVICE_CLASS=y
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
@@ -1230,10 +1262,6 @@ CONFIG_USB_MON=y
# USB port drivers
#
# CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
@@ -1259,16 +1287,9 @@ CONFIG_USB_MON=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
@@ -1281,6 +1302,7 @@ CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_EHCA=m
# CONFIG_INFINIBAND_AMSO1100 is not set
# CONFIG_MLX4_INFINIBAND is not set
+# CONFIG_INFINIBAND_NES is not set
CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_CM is not set
CONFIG_INFINIBAND_IPOIB_DEBUG=y
@@ -1289,6 +1311,7 @@ CONFIG_INFINIBAND_SRP=m
# CONFIG_INFINIBAND_ISER is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
#
@@ -1334,12 +1357,10 @@ CONFIG_XFS_POSIX_ACL=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
@@ -1388,8 +1409,10 @@ CONFIG_CONFIGFS_FS=m
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -1473,7 +1496,6 @@ CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
@@ -1487,6 +1509,8 @@ CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
@@ -1495,11 +1519,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_KPROBES=y
-CONFIG_MARKERS=y
#
# Kernel hacking
@@ -1518,6 +1537,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1530,9 +1550,10 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
@@ -1557,7 +1578,9 @@ CONFIG_VIRQ_DEBUG=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
@@ -1570,12 +1593,15 @@ CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -1591,11 +1617,13 @@ CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_TEST=m
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/sbc834x_defconfig b/arch/powerpc/configs/sbc834x_defconfig
index 9245bcc2472..1f1518229f6 100644
--- a/arch/powerpc/configs/sbc834x_defconfig
+++ b/arch/powerpc/configs/sbc834x_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Thu Jan 24 15:54:27 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:38 2008
#
# CONFIG_PPC64 is not set
@@ -14,8 +14,8 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_83xx=y
CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
@@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -66,17 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -88,17 +91,25 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
@@ -127,6 +138,7 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
@@ -135,20 +147,22 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-# CONFIG_MPC8313_RDB is not set
+CONFIG_MPC83xx=y
+# CONFIG_MPC831x_RDB is not set
# CONFIG_MPC832x_MDS is not set
# CONFIG_MPC832x_RDB is not set
# CONFIG_MPC834x_MDS is not set
# CONFIG_MPC834x_ITX is not set
# CONFIG_MPC836x_MDS is not set
# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
CONFIG_SBC834x=y
-CONFIG_MPC834x=y
+CONFIG_PPC_MPC834x=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
@@ -175,12 +189,16 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -199,11 +217,7 @@ CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
@@ -248,6 +262,7 @@ CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -303,6 +318,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -342,11 +358,13 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -381,6 +399,7 @@ CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
CONFIG_BROADCOM_PHY=y
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -391,6 +410,7 @@ CONFIG_MII=y
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
CONFIG_GIANFAR=y
# CONFIG_GFAR_NAPI is not set
# CONFIG_NETDEV_10000 is not set
@@ -403,7 +423,6 @@ CONFIG_GIANFAR=y
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -498,14 +517,12 @@ CONFIG_I2C_MPC=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -530,6 +547,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
@@ -557,6 +575,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
@@ -564,9 +583,11 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -617,9 +638,11 @@ CONFIG_HID=y
# CONFIG_HIDRAW is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -638,12 +661,10 @@ CONFIG_HID=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -685,8 +706,10 @@ CONFIG_TMPFS=y
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -733,7 +756,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
@@ -759,6 +781,7 @@ CONFIG_ENABLE_MUST_CHECK=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
@@ -776,6 +799,9 @@ CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -790,11 +816,13 @@ CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/sbc8548_defconfig b/arch/powerpc/configs/sbc8548_defconfig
index 3b7fa53a247..67f67978c74 100644
--- a/arch/powerpc/configs/sbc8548_defconfig
+++ b/arch/powerpc/configs/sbc8548_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Thu Jan 24 15:19:12 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:39 2008
#
# CONFIG_PPC64 is not set
@@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_85xx=y
CONFIG_E500=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
# CONFIG_PPC_MM_SLICES is not set
@@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -67,17 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -90,17 +93,25 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
@@ -124,24 +135,29 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
CONFIG_SBC8548=y
# CONFIG_SBC8560 is not set
-CONFIG_MPC8540=y
-CONFIG_MPC85xx=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
@@ -153,6 +169,7 @@ CONFIG_MPIC=y
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
+# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
@@ -168,13 +185,17 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -193,11 +214,7 @@ CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
@@ -246,6 +263,7 @@ CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -301,6 +319,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -345,7 +364,7 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
@@ -353,6 +372,8 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -396,6 +417,7 @@ CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
CONFIG_BROADCOM_PHY=y
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -417,7 +439,9 @@ CONFIG_NETDEV_1000=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -444,6 +468,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
@@ -456,7 +481,6 @@ CONFIG_NETDEV_10000=y
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -499,6 +523,7 @@ CONFIG_INPUT=y
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -558,6 +583,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -600,10 +626,12 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -622,12 +650,10 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -669,8 +695,10 @@ CONFIG_TMPFS=y
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -714,7 +742,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
@@ -737,5 +764,49 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/sbc8560_defconfig b/arch/powerpc/configs/sbc8560_defconfig
index d89fce0d3ba..fef605579e2 100644
--- a/arch/powerpc/configs/sbc8560_defconfig
+++ b/arch/powerpc/configs/sbc8560_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Wed Jan 23 14:59:20 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:39 2008
#
# CONFIG_PPC64 is not set
@@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_85xx=y
CONFIG_E500=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
# CONFIG_PPC_MM_SLICES is not set
@@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -67,17 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -91,17 +94,26 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -124,23 +136,30 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
CONFIG_SBC8560=y
-CONFIG_MPC8560=y
-CONFIG_MPC85xx=y
+# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
@@ -167,13 +186,17 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -192,11 +215,7 @@ CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
@@ -239,6 +258,7 @@ CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -294,6 +314,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -335,11 +356,13 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -374,6 +397,7 @@ CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
CONFIG_BROADCOM_PHY=y
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -384,6 +408,7 @@ CONFIG_MII=y
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
CONFIG_GIANFAR=y
CONFIG_GFAR_NAPI=y
CONFIG_NETDEV_10000=y
@@ -396,7 +421,6 @@ CONFIG_NETDEV_10000=y
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -489,6 +513,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -538,12 +563,9 @@ CONFIG_USB_SUPPORT=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
@@ -569,9 +591,10 @@ CONFIG_RTC_INTF_DEV=y
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T59=y
# CONFIG_RTC_DRV_V3020 is not set
@@ -579,6 +602,7 @@ CONFIG_RTC_DRV_M48T59=y
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -597,12 +621,10 @@ CONFIG_RTC_DRV_M48T59=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -644,8 +666,10 @@ CONFIG_TMPFS=y
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -686,7 +710,6 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
@@ -702,7 +725,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
@@ -733,8 +755,8 @@ CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -752,6 +774,7 @@ CONFIG_PPC_EARLY_DEBUG=y
# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
# CONFIG_PPC_EARLY_DEBUG_44x is not set
+# CONFIG_PPC_EARLY_DEBUG_40x is not set
# CONFIG_PPC_EARLY_DEBUG_CPM is not set
#
@@ -760,5 +783,48 @@ CONFIG_PPC_EARLY_DEBUG=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index a034a5e452e..8fc85747a0a 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Tue Jan 8 09:33:54 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:41 2008
#
# CONFIG_PPC64 is not set
@@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -66,17 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
@@ -87,11 +90,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -99,6 +104,13 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -126,6 +138,7 @@ CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
@@ -136,10 +149,10 @@ CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_MPC5121_ADS is not set
# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
-# CONFIG_PPC_EFIKA is not set
-# CONFIG_PPC_LITE5200 is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
@@ -153,6 +166,7 @@ CONFIG_STORCENTER=y
CONFIG_MPC10X_BRIDGE=y
CONFIG_MPC10X_OPENPIC=y
# CONFIG_MPC10X_STORE_GATHERING is not set
+# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
@@ -164,7 +178,6 @@ CONFIG_MPIC=y
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_TAU is not set
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
@@ -180,12 +193,16 @@ CONFIG_HZ_100=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -206,11 +223,7 @@ CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,115200"
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="storcenter.dts"
CONFIG_ISA_DMA_API=y
#
@@ -310,6 +323,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -343,6 +357,7 @@ CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_OF_PARTS is not set
#
# User Modules And Translation Layers
@@ -438,12 +453,14 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
@@ -460,12 +477,12 @@ CONFIG_IDE_PROC_FS=y
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
@@ -495,7 +512,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
@@ -563,6 +579,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
@@ -603,7 +620,6 @@ CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
@@ -611,6 +627,9 @@ CONFIG_NETDEV_1000=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -623,6 +642,7 @@ CONFIG_R8169=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_GIANFAR is not set
# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
@@ -649,7 +669,6 @@ CONFIG_R8169=y
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -672,6 +691,7 @@ CONFIG_R8169=y
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -746,14 +766,12 @@ CONFIG_I2C_MPC=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -769,6 +787,7 @@ CONFIG_I2C_MPC=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -814,6 +833,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@@ -827,9 +847,10 @@ CONFIG_USB_DEVICE_CLASS=y
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_FSL is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
@@ -877,10 +898,6 @@ CONFIG_USB_STORAGE=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
@@ -906,21 +923,18 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
+
+#
+# Conflicting RTC option has been selected, check GEN_RTC and RTC
+#
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
@@ -947,6 +961,7 @@ CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
@@ -956,9 +971,10 @@ CONFIG_RTC_DRV_DS1307=y
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@@ -966,6 +982,7 @@ CONFIG_RTC_DRV_DS1307=y
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -995,12 +1012,10 @@ CONFIG_XFS_FS=m
# CONFIG_XFS_RT is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -1053,8 +1068,10 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
@@ -1121,7 +1138,6 @@ CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
@@ -1139,9 +1155,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
@@ -1155,6 +1168,7 @@ CONFIG_INSTRUMENTATION=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/stx_gp3_defconfig b/arch/powerpc/configs/stx_gp3_defconfig
index e8137a839bd..1d303c49bb0 100644
--- a/arch/powerpc/configs/stx_gp3_defconfig
+++ b/arch/powerpc/configs/stx_gp3_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Thu Jan 24 02:02:30 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:42 2008
#
# CONFIG_PPC64 is not set
@@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_85xx=y
CONFIG_E500=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
# CONFIG_PPC_MM_SLICES is not set
@@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -67,17 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -91,11 +94,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -103,6 +108,13 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
@@ -130,23 +142,29 @@ CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
CONFIG_STX_GP3=y
-CONFIG_MPC8560=y
-CONFIG_MPC85xx=y
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
@@ -176,13 +194,17 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -201,11 +223,7 @@ CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="stx_gp3_8560.dts"
CONFIG_ISA_DMA_API=y
#
@@ -255,6 +273,7 @@ CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -290,31 +309,36 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
@@ -329,13 +353,10 @@ CONFIG_NETFILTER_XTABLES=m
#
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_IPRANGE is not set
-# CONFIG_IP_NF_MATCH_TOS is not set
# CONFIG_IP_NF_MATCH_RECENT is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_OWNER is not set
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
CONFIG_IP_NF_FILTER=m
# CONFIG_IP_NF_TARGET_REJECT is not set
@@ -365,6 +386,7 @@ CONFIG_IP_NF_FILTER=m
#
CONFIG_NET_PKTGEN=y
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -418,7 +440,7 @@ CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
@@ -426,17 +448,20 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=m
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
@@ -452,7 +477,6 @@ CONFIG_IDE_GENERIC=y
#
# PCI IDE chipsets support
#
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_AEC62XX is not set
@@ -480,7 +504,6 @@ CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
@@ -550,6 +573,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
@@ -595,6 +619,7 @@ CONFIG_MARVELL_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -618,7 +643,9 @@ CONFIG_NETDEV_1000=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -645,6 +672,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
@@ -659,7 +687,6 @@ CONFIG_NETDEV_10000=y
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -727,6 +754,7 @@ CONFIG_SERIO_LIBPS2=y
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -805,14 +833,12 @@ CONFIG_I2C_ALGOBIT=m
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -837,6 +863,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -866,6 +893,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
@@ -875,9 +903,11 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -947,16 +977,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
#
@@ -983,12 +1011,10 @@ CONFIG_FS_MBCACHE=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
@@ -1036,8 +1062,10 @@ CONFIG_TMPFS=y
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -1124,10 +1152,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
@@ -1146,6 +1170,7 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1159,9 +1184,9 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -1178,6 +1203,51 @@ CONFIG_BDI_SWITCH=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/tqm8540_defconfig b/arch/powerpc/configs/tqm8540_defconfig
index 732de34cfc2..d39ee3b35bf 100644
--- a/arch/powerpc/configs/tqm8540_defconfig
+++ b/arch/powerpc/configs/tqm8540_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Fri Jan 25 01:32:05 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:43 2008
#
# CONFIG_PPC64 is not set
@@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_85xx=y
CONFIG_E500=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
# CONFIG_PPC_MM_SLICES is not set
@@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -67,17 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -89,11 +92,13 @@ CONFIG_SYSCTL_SYSCALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -101,6 +106,12 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
@@ -124,15 +135,17 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
@@ -143,8 +156,9 @@ CONFIG_TQM8540=y
# CONFIG_TQM8541 is not set
# CONFIG_TQM8555 is not set
# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
CONFIG_TQM85xx=y
-CONFIG_MPC85xx=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
@@ -173,13 +187,17 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -198,11 +216,7 @@ CONFIG_VIRT_TO_BUS=y
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="tqm8540.dts"
CONFIG_ISA_DMA_API=y
#
@@ -249,6 +263,7 @@ CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -304,6 +319,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -335,6 +351,7 @@ CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
#
# User Modules And Translation Layers
@@ -421,7 +438,7 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
@@ -429,12 +446,14 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
@@ -450,12 +469,12 @@ CONFIG_IDE_PROC_FS=y
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
@@ -486,7 +505,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
@@ -532,6 +550,7 @@ CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -559,6 +578,7 @@ CONFIG_E100=y
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
@@ -570,7 +590,9 @@ CONFIG_NETDEV_1000=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -597,6 +619,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
@@ -609,7 +632,6 @@ CONFIG_NETDEV_10000=y
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -652,6 +674,7 @@ CONFIG_INPUT=y
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -725,14 +748,12 @@ CONFIG_I2C_MPC=y
#
# Miscellaneous I2C Chip support
#
-CONFIG_SENSORS_DS1337=y
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -757,6 +778,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -786,6 +808,7 @@ CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
@@ -795,9 +818,11 @@ CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_HWMON_DEBUG_CHIP=y
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -850,16 +875,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -885,12 +908,10 @@ CONFIG_FS_MBCACHE=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -943,8 +964,10 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -1002,9 +1025,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
@@ -1018,6 +1038,7 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1028,5 +1049,49 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/tqm8541_defconfig b/arch/powerpc/configs/tqm8541_defconfig
index 1aff35f0c53..cbf6ad2d71d 100644
--- a/arch/powerpc/configs/tqm8541_defconfig
+++ b/arch/powerpc/configs/tqm8541_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Fri Jan 25 01:31:28 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:44 2008
#
# CONFIG_PPC64 is not set
@@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_85xx=y
CONFIG_E500=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
# CONFIG_PPC_MM_SLICES is not set
@@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -67,17 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -89,11 +92,13 @@ CONFIG_SYSCTL_SYSCALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -101,6 +106,12 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
@@ -124,15 +135,17 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
@@ -143,8 +156,9 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_TQM8541=y
# CONFIG_TQM8555 is not set
# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
CONFIG_TQM85xx=y
-CONFIG_MPC85xx=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
@@ -174,13 +188,17 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -199,11 +217,7 @@ CONFIG_VIRT_TO_BUS=y
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="tqm8541.dts"
CONFIG_ISA_DMA_API=y
#
@@ -250,6 +264,7 @@ CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -305,6 +320,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -336,6 +352,7 @@ CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
#
# User Modules And Translation Layers
@@ -422,7 +439,7 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
@@ -430,12 +447,14 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
@@ -451,12 +470,12 @@ CONFIG_IDE_PROC_FS=y
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
@@ -487,7 +506,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
@@ -533,6 +551,7 @@ CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -560,6 +579,7 @@ CONFIG_E100=y
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
@@ -572,7 +592,9 @@ CONFIG_NETDEV_1000=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -599,6 +621,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
@@ -611,7 +634,6 @@ CONFIG_NETDEV_10000=y
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -654,6 +676,7 @@ CONFIG_INPUT=y
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -735,14 +758,12 @@ CONFIG_I2C_MPC=y
#
# Miscellaneous I2C Chip support
#
-CONFIG_SENSORS_DS1337=y
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -767,6 +788,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -796,6 +818,7 @@ CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
@@ -805,9 +828,11 @@ CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_HWMON_DEBUG_CHIP=y
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -860,16 +885,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -895,12 +918,10 @@ CONFIG_FS_MBCACHE=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -953,8 +974,10 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -1012,9 +1035,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
@@ -1028,6 +1048,7 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_KGDB_CONSOLE is not set
@@ -1039,6 +1060,50 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/tqm8555_defconfig b/arch/powerpc/configs/tqm8555_defconfig
index a3af2262128..bbff962c847 100644
--- a/arch/powerpc/configs/tqm8555_defconfig
+++ b/arch/powerpc/configs/tqm8555_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Fri Jan 25 01:15:24 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:44 2008
#
# CONFIG_PPC64 is not set
@@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_85xx=y
CONFIG_E500=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
# CONFIG_PPC_MM_SLICES is not set
@@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -67,17 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -89,11 +92,13 @@ CONFIG_SYSCTL_SYSCALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -101,6 +106,12 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
@@ -124,15 +135,17 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
@@ -143,8 +156,9 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_TQM8541 is not set
CONFIG_TQM8555=y
# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
CONFIG_TQM85xx=y
-CONFIG_MPC85xx=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
@@ -174,13 +188,17 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -199,11 +217,7 @@ CONFIG_VIRT_TO_BUS=y
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="tqm8555.dts"
CONFIG_ISA_DMA_API=y
#
@@ -250,6 +264,7 @@ CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -305,6 +320,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -336,6 +352,7 @@ CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
#
# User Modules And Translation Layers
@@ -422,7 +439,7 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
@@ -430,12 +447,14 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
@@ -451,12 +470,12 @@ CONFIG_IDE_PROC_FS=y
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
@@ -487,7 +506,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
@@ -533,6 +551,7 @@ CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -560,6 +579,7 @@ CONFIG_E100=y
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
@@ -572,7 +592,9 @@ CONFIG_NETDEV_1000=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -599,6 +621,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
@@ -611,7 +634,6 @@ CONFIG_NETDEV_10000=y
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -654,6 +676,7 @@ CONFIG_INPUT=y
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -735,14 +758,12 @@ CONFIG_I2C_MPC=y
#
# Miscellaneous I2C Chip support
#
-CONFIG_SENSORS_DS1337=y
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -767,6 +788,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -796,6 +818,7 @@ CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
@@ -805,9 +828,11 @@ CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_HWMON_DEBUG_CHIP=y
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -860,16 +885,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -895,12 +918,10 @@ CONFIG_FS_MBCACHE=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -953,8 +974,10 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -1012,9 +1035,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
@@ -1028,6 +1048,7 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_KGDB_CONSOLE is not set
@@ -1039,6 +1060,50 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/tqm8560_defconfig b/arch/powerpc/configs/tqm8560_defconfig
index 0832e8996ac..63c5ec8b651 100644
--- a/arch/powerpc/configs/tqm8560_defconfig
+++ b/arch/powerpc/configs/tqm8560_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Thu Jan 24 23:50:42 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:45 2008
#
# CONFIG_PPC64 is not set
@@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_85xx=y
CONFIG_E500=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
# CONFIG_PPC_MM_SLICES is not set
@@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -67,17 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -89,11 +92,13 @@ CONFIG_SYSCTL_SYSCALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -101,6 +106,12 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
@@ -124,15 +135,17 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
@@ -143,8 +156,9 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_TQM8541 is not set
# CONFIG_TQM8555 is not set
CONFIG_TQM8560=y
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
CONFIG_TQM85xx=y
-CONFIG_MPC85xx=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
@@ -174,13 +188,17 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -199,11 +217,7 @@ CONFIG_VIRT_TO_BUS=y
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="tqm8560.dts"
CONFIG_ISA_DMA_API=y
#
@@ -250,6 +264,7 @@ CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -305,6 +320,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -336,6 +352,7 @@ CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
#
# User Modules And Translation Layers
@@ -422,7 +439,7 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
@@ -430,12 +447,14 @@ CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
@@ -451,12 +470,12 @@ CONFIG_IDE_PROC_FS=y
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
@@ -487,7 +506,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
@@ -533,6 +551,7 @@ CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -560,6 +579,7 @@ CONFIG_E100=y
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
@@ -572,7 +592,9 @@ CONFIG_NETDEV_1000=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -599,6 +621,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
@@ -611,7 +634,6 @@ CONFIG_NETDEV_10000=y
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -654,6 +676,7 @@ CONFIG_INPUT=y
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -735,14 +758,12 @@ CONFIG_I2C_MPC=y
#
# Miscellaneous I2C Chip support
#
-CONFIG_SENSORS_DS1337=y
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -767,6 +788,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@@ -796,6 +818,7 @@ CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
@@ -805,9 +828,11 @@ CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_HWMON_DEBUG_CHIP=y
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -860,16 +885,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
@@ -895,12 +918,10 @@ CONFIG_FS_MBCACHE=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -953,8 +974,10 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -1012,9 +1035,6 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
@@ -1028,6 +1048,7 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_KGDB_CONSOLE is not set
@@ -1039,6 +1060,50 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 4846bf543a8..4ec60552150 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -241,8 +241,12 @@ void discard_lazy_cpu_state(void)
}
#endif /* CONFIG_SMP */
+static DEFINE_PER_CPU(unsigned long, current_dabr);
+
int set_dabr(unsigned long dabr)
{
+ __get_cpu_var(current_dabr) = dabr;
+
#ifdef CONFIG_PPC_MERGE /* XXX for now */
if (ppc_md.set_dabr)
return ppc_md.set_dabr(dabr);
@@ -259,8 +263,6 @@ int set_dabr(unsigned long dabr)
DEFINE_PER_CPU(struct cpu_usage, cpu_usage_array);
#endif
-static DEFINE_PER_CPU(unsigned long, current_dabr);
-
struct task_struct *__switch_to(struct task_struct *prev,
struct task_struct *new)
{
@@ -325,10 +327,8 @@ struct task_struct *__switch_to(struct task_struct *prev,
#endif /* CONFIG_SMP */
- if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr)) {
+ if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr))
set_dabr(new->thread.dabr);
- __get_cpu_var(current_dabr) = new->thread.dabr;
- }
new_thread = &new->thread;
old_thread = &current->thread;
@@ -353,6 +353,12 @@ struct task_struct *__switch_to(struct task_struct *prev,
account_process_vtime(current);
calculate_steal_time();
+ /*
+ * We can't take a PMU exception inside _switch() since there is a
+ * window where the kernel stack SLB and the kernel stack are out
+ * of sync. Hard disable here.
+ */
+ hard_irq_disable();
last = _switch(old_thread, new_thread);
local_irq_restore(flags);
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 7673e986573..2a9fe97e452 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -530,15 +530,21 @@ static int gpr32_set(struct task_struct *target,
--count;
}
- if (kbuf)
+ if (kbuf) {
for (; count > 0 && pos <= PT_MAX_PUT_REG; --count)
regs[pos++] = *k++;
- else
+ for (; count > 0 && pos < PT_TRAP; --count, ++pos)
+ ++k;
+ } else {
for (; count > 0 && pos <= PT_MAX_PUT_REG; --count) {
if (__get_user(reg, u++))
return -EFAULT;
regs[pos++] = reg;
}
+ for (; count > 0 && pos < PT_TRAP; --count, ++pos)
+ if (__get_user(reg, u++))
+ return -EFAULT;
+ }
if (count > 0 && pos == PT_TRAP) {
if (kbuf)
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 590f1f67c87..a83dfa3cf40 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -351,9 +351,14 @@ static void __init htab_init_page_sizes(void)
mmu_vmalloc_psize = MMU_PAGE_64K;
if (mmu_linear_psize == MMU_PAGE_4K)
mmu_linear_psize = MMU_PAGE_64K;
- if (cpu_has_feature(CPU_FTR_CI_LARGE_PAGE))
- mmu_io_psize = MMU_PAGE_64K;
- else
+ if (cpu_has_feature(CPU_FTR_CI_LARGE_PAGE)) {
+ /*
+ * Don't use 64k pages for ioremap on pSeries, since
+ * that would stop us accessing the HEA ethernet.
+ */
+ if (!machine_is(pseries))
+ mmu_io_psize = MMU_PAGE_64K;
+ } else
mmu_ci_restrictions = 1;
}
#endif /* CONFIG_PPC_64K_PAGES */
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 47b06bad24a..906daeda59a 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -124,6 +124,12 @@ void slb_flush_and_rebolt(void)
ksp_vsid_data = get_slb_shadow()->save_area[2].vsid;
}
+ /*
+ * We can't take a PMU exception in the following code, so hard
+ * disable interrupts.
+ */
+ hard_irq_disable();
+
/* We need to do this all in asm, so we're sure we don't touch
* the stack between the slbia and rebolting it. */
asm volatile("isync\n"
diff --git a/arch/powerpc/oprofile/cell/vma_map.c b/arch/powerpc/oprofile/cell/vma_map.c
index 76ec1d16aef..9a932177e70 100644
--- a/arch/powerpc/oprofile/cell/vma_map.c
+++ b/arch/powerpc/oprofile/cell/vma_map.c
@@ -92,7 +92,7 @@ vma_map_add(struct vma_to_fileoffset_map *map, unsigned int vma,
* A pointer to the first vma_map in the generated list
* of vma_maps is returned. */
struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
- unsigned long spu_elf_start)
+ unsigned long __spu_elf_start)
{
static const unsigned char expected[EI_PAD] = {
[EI_MAG0] = ELFMAG0,
@@ -107,9 +107,11 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
int grd_val;
struct vma_to_fileoffset_map *map = NULL;
+ void __user *spu_elf_start = (void __user *)__spu_elf_start;
struct spu_overlay_info ovly;
unsigned int overlay_tbl_offset = -1;
- unsigned long phdr_start, shdr_start;
+ Elf32_Phdr __user *phdr_start;
+ Elf32_Shdr __user *shdr_start;
Elf32_Ehdr ehdr;
Elf32_Phdr phdr;
Elf32_Shdr shdr, shdr_str;
@@ -121,12 +123,12 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
unsigned int ovly_buf_table_sym = 0;
unsigned int ovly_table_end_sym = 0;
unsigned int ovly_buf_table_end_sym = 0;
- unsigned long ovly_table;
+ struct spu_overlay_info __user *ovly_table;
unsigned int n_ovlys;
/* Get and validate ELF header. */
- if (copy_from_user(&ehdr, (void *) spu_elf_start, sizeof (ehdr)))
+ if (copy_from_user(&ehdr, spu_elf_start, sizeof (ehdr)))
goto fail;
if (memcmp(ehdr.e_ident, expected, EI_PAD) != 0) {
@@ -152,9 +154,7 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
/* Traverse program headers. */
for (i = 0; i < ehdr.e_phnum; i++) {
- if (copy_from_user(&phdr,
- (void *) (phdr_start + i * sizeof(phdr)),
- sizeof(phdr)))
+ if (copy_from_user(&phdr, phdr_start + i, sizeof(phdr)))
goto fail;
if (phdr.p_type != PT_LOAD)
@@ -171,9 +171,7 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
pr_debug("SPU_PROF: Created non-overlay maps\n");
/* Traverse section table and search for overlay-related symbols. */
for (i = 0; i < ehdr.e_shnum; i++) {
- if (copy_from_user(&shdr,
- (void *) (shdr_start + i * sizeof(shdr)),
- sizeof(shdr)))
+ if (copy_from_user(&shdr, shdr_start + i, sizeof(shdr)))
goto fail;
if (shdr.sh_type != SHT_SYMTAB)
@@ -182,8 +180,7 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
continue;
if (copy_from_user(&shdr_str,
- (void *) (shdr_start + shdr.sh_link *
- sizeof(shdr)),
+ shdr_start + shdr.sh_link,
sizeof(shdr)))
goto fail;
@@ -191,15 +188,15 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
goto fail;;
for (j = 0; j < shdr.sh_size / sizeof (sym); j++) {
- if (copy_from_user(&sym, (void *) (spu_elf_start +
- shdr.sh_offset + j *
- sizeof (sym)),
+ if (copy_from_user(&sym, spu_elf_start +
+ shdr.sh_offset +
+ j * sizeof (sym),
sizeof (sym)))
goto fail;
- if (copy_from_user(name, (void *)
- (spu_elf_start + shdr_str.sh_offset +
- sym.st_name),
+ if (copy_from_user(name,
+ spu_elf_start + shdr_str.sh_offset +
+ sym.st_name,
20))
goto fail;
@@ -245,9 +242,7 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
/* Traverse overlay table. */
for (i = 0; i < n_ovlys; i++) {
- if (copy_from_user(&ovly, (void *)
- (ovly_table + i * sizeof (ovly)),
- sizeof (ovly)))
+ if (copy_from_user(&ovly, ovly_table + i, sizeof (ovly)))
goto fail;
/* The ovly.vma/size/offset arguments are analogous to the same
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 20ea0e118f2..d75ccded7f1 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -802,17 +802,24 @@ static int __init cell_iommu_init_disabled(void)
static u64 cell_iommu_get_fixed_address(struct device *dev)
{
- u64 cpu_addr, size, best_size, pci_addr = OF_BAD_ADDR;
+ u64 cpu_addr, size, best_size, dev_addr = OF_BAD_ADDR;
struct device_node *np;
const u32 *ranges = NULL;
- int i, len, best;
+ int i, len, best, naddr, nsize, pna, range_size;
np = of_node_get(dev->archdata.of_node);
- while (np) {
+ while (1) {
+ naddr = of_n_addr_cells(np);
+ nsize = of_n_size_cells(np);
+ np = of_get_next_parent(np);
+ if (!np)
+ break;
+
ranges = of_get_property(np, "dma-ranges", &len);
- if (ranges)
+
+ /* Ignore empty ranges, they imply no translation required */
+ if (ranges && len > 0)
break;
- np = of_get_next_parent(np);
}
if (!ranges) {
@@ -822,15 +829,17 @@ static u64 cell_iommu_get_fixed_address(struct device *dev)
len /= sizeof(u32);
+ pna = of_n_addr_cells(np);
+ range_size = naddr + nsize + pna;
+
/* dma-ranges format:
- * 1 cell: pci space
- * 2 cells: pci address
- * 2 cells: parent address
- * 2 cells: size
+ * child addr : naddr cells
+ * parent addr : pna cells
+ * size : nsize cells
*/
- for (i = 0, best = -1, best_size = 0; i < len; i += 7) {
- cpu_addr = of_translate_dma_address(np, ranges +i + 3);
- size = of_read_number(ranges + i + 5, 2);
+ for (i = 0, best = -1, best_size = 0; i < len; i += range_size) {
+ cpu_addr = of_translate_dma_address(np, ranges + i + naddr);
+ size = of_read_number(ranges + i + naddr + pna, nsize);
if (cpu_addr == 0 && size > best_size) {
best = i;
@@ -838,15 +847,15 @@ static u64 cell_iommu_get_fixed_address(struct device *dev)
}
}
- if (best >= 0)
- pci_addr = of_read_number(ranges + best + 1, 2);
- else
+ if (best >= 0) {
+ dev_addr = of_read_number(ranges + best, naddr);
+ } else
dev_dbg(dev, "iommu: no suitable range found!\n");
out:
of_node_put(np);
- return pci_addr;
+ return dev_addr;
}
static int dma_set_mask_and_switch(struct device *dev, u64 dma_mask)
diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c
index dda34650cb0..5c531e8f9f6 100644
--- a/arch/powerpc/platforms/cell/setup.c
+++ b/arch/powerpc/platforms/cell/setup.c
@@ -81,6 +81,42 @@ static void cell_progress(char *s, unsigned short hex)
printk("*** %04x : %s\n", hex, s ? s : "");
}
+static void cell_fixup_pcie_rootcomplex(struct pci_dev *dev)
+{
+ struct pci_controller *hose;
+ const char *s;
+ int i;
+
+ if (!machine_is(cell))
+ return;
+
+ /* We're searching for a direct child of the PHB */
+ if (dev->bus->self != NULL || dev->devfn != 0)
+ return;
+
+ hose = pci_bus_to_host(dev->bus);
+ if (hose == NULL)
+ return;
+
+ /* Only on PCIE */
+ if (!of_device_is_compatible(hose->dn, "pciex"))
+ return;
+
+ /* And only on axon */
+ s = of_get_property(hose->dn, "model", NULL);
+ if (!s || strcmp(s, "Axon") != 0)
+ return;
+
+ for (i = 0; i < PCI_BRIDGE_RESOURCES; i++) {
+ dev->resource[i].start = dev->resource[i].end = 0;
+ dev->resource[i].flags = 0;
+ }
+
+ printk(KERN_DEBUG "PCI: Hiding resources on Axon PCIE RC %s\n",
+ pci_name(dev));
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, cell_fixup_pcie_rootcomplex);
+
static int __init cell_publish_devices(void)
{
int node;
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index ca52b587166..a977f200db8 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -763,7 +763,7 @@ void xics_request_IPIs(void)
}
#endif /* CONFIG_SMP */
-void xics_teardown_cpu()
+void xics_teardown_cpu(void)
{
int cpu = smp_processor_id();
diff --git a/arch/powerpc/sysdev/bestcomm/bestcomm.c b/arch/powerpc/sysdev/bestcomm/bestcomm.c
index f589999361e..64ec7d62936 100644
--- a/arch/powerpc/sysdev/bestcomm/bestcomm.c
+++ b/arch/powerpc/sysdev/bestcomm/bestcomm.c
@@ -52,6 +52,10 @@ bcom_task_alloc(int bd_count, int bd_size, int priv_size)
int i, tasknum = -1;
struct bcom_task *tsk;
+ /* Don't try to do anything if bestcomm init failed */
+ if (!bcom_eng)
+ return NULL;
+
/* Get and reserve a task num */
spin_lock(&bcom_eng->lock);
@@ -484,8 +488,8 @@ mpc52xx_bcom_remove(struct of_device *op)
}
static struct of_device_id mpc52xx_bcom_of_match[] = {
- { .type = "dma-controller", .compatible = "fsl,mpc5200-bestcomm", },
- { .type = "dma-controller", .compatible = "mpc5200-bestcomm", },
+ { .compatible = "fsl,mpc5200-bestcomm", },
+ { .compatible = "mpc5200-bestcomm", },
{},
};
diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c
index ae0dbf4c1d6..0f2dfb0aaa6 100644
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -906,7 +906,7 @@ static int __init init_ipic_sysfs(void)
{
int rc;
- if (!primary_ipic->regs)
+ if (!primary_ipic || !primary_ipic->regs)
return -ENODEV;
printk(KERN_DEBUG "Registering ipic with sysfs...\n");
diff --git a/arch/s390/lib/uaccess_pt.c b/arch/s390/lib/uaccess_pt.c
index 7e8efaade2e..5efdfe9f5e7 100644
--- a/arch/s390/lib/uaccess_pt.c
+++ b/arch/s390/lib/uaccess_pt.c
@@ -406,6 +406,8 @@ int futex_atomic_cmpxchg_pt(int __user *uaddr, int oldval, int newval)
{
int ret;
+ if (!current->mm)
+ return -EFAULT;
spin_lock(&current->mm->page_table_lock);
uaddr = (int __user *) __dat_user_addr((unsigned long) uaddr);
if (!uaddr) {
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 95b7534e9e3..8d2cd1de572 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -72,9 +72,6 @@ config SYS_SUPPORTS_NUMA
config SYS_SUPPORTS_PCI
bool
-config ARCH_MAY_HAVE_PC_FDC
- bool
-
config STACKTRACE_SUPPORT
def_bool y
@@ -580,6 +577,7 @@ config SH_TIMER_IRQ
CPU_SUBTYPE_SH7763
default "86" if CPU_SUBTYPE_SH7619
default "140" if CPU_SUBTYPE_SH7206
+ default "142" if CPU_SUBTYPE_SH7203
default "16"
config SH_PCLK_FREQ
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index c510c225144..cffc92b1bf2 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -154,7 +154,11 @@ drivers-$(CONFIG_OPROFILE) += arch/sh/oprofile/
boot := arch/sh/boot
+ifneq ($(KBUILD_SRC),)
incdir-prefix := $(srctree)/include/asm-sh/
+else
+incdir-prefix :=
+endif
# Update machine arch and proc symlinks if something which affects
# them changed. We use .arch and .mach to indicate when they were
@@ -182,7 +186,7 @@ include/asm-sh/.mach: $(wildcard include/config/sh/*.h) \
$(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi
$(Q)rm -f include/asm-sh/mach
$(Q)for i in $(incdir-y); do \
- if [ -d $(incdir-prefix)$$i ]; then \
+ if [ -d $(srctree)/include/asm-sh/$$i ]; then \
echo -n ' SYMLINK include/asm-sh/mach -> '; \
echo -e "include/asm-sh/$$i"; \
ln -fsn $(incdir-prefix)$$i \
@@ -191,7 +195,7 @@ include/asm-sh/.mach: $(wildcard include/config/sh/*.h) \
if [ ! -d include/asm-sh/mach ]; then \
echo -n ' SYMLINK include/asm-sh/mach -> '; \
echo -e 'include/asm-sh'; \
- ln -fsn $(incdir-prefix) include/asm-sh/mach; \
+ ln -fsn $(incdir-prefix)../asm-sh include/asm-sh/mach; \
fi; \
fi; \
done
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
index 59f552c1334..89b408620dc 100644
--- a/arch/sh/boot/Makefile
+++ b/arch/sh/boot/Makefile
@@ -32,19 +32,19 @@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE
$(obj)/compressed/vmlinux: FORCE
$(Q)$(MAKE) $(build)=$(obj)/compressed $@
-KERNEL_LOAD := $(shell /bin/bash -c 'printf "0x%8x" \
+KERNEL_LOAD := $(shell /bin/bash -c 'printf "0x%08x" \
$$[$(CONFIG_PAGE_OFFSET) + \
$(CONFIG_MEMORY_START) + \
$(CONFIG_ZERO_PAGE_OFFSET)]')
-KERNEL_ENTRY := $(shell /bin/bash -c 'printf "0x%8x" \
+KERNEL_ENTRY := $(shell /bin/bash -c 'printf "0x%08x" \
$$[$(CONFIG_PAGE_OFFSET) + \
$(CONFIG_MEMORY_START) + \
$(CONFIG_ZERO_PAGE_OFFSET)+0x1000]')
quiet_cmd_uimage = UIMAGE $@
cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel \
- -C none -a $(KERNEL_LOAD) -e $(KERNEL_ENTRY) \
+ -C gzip -a $(KERNEL_LOAD) -e $(KERNEL_ENTRY) \
-n 'Linux-$(KERNELRELEASE)' -d $< $@
$(obj)/uImage: $(obj)/vmlinux.bin.gz FORCE
diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S
index 7a26569e795..0fc89069d8c 100644
--- a/arch/sh/kernel/cpu/sh2/entry.S
+++ b/arch/sh/kernel/cpu/sh2/entry.S
@@ -267,7 +267,6 @@ ENTRY(sh_bios_handler)
ENTRY(address_error_trap_handler)
mov r15,r4 ! regs
- add #4,r4
mov #OFF_PC,r0
mov.l @(r0,r15),r6 ! pc
mov.l 1f,r0
diff --git a/arch/sh/kernel/cpu/sh2a/fpu.c b/arch/sh/kernel/cpu/sh2a/fpu.c
index ff99562456f..5627c0b3ffa 100644
--- a/arch/sh/kernel/cpu/sh2a/fpu.c
+++ b/arch/sh/kernel/cpu/sh2a/fpu.c
@@ -13,6 +13,7 @@
#include <linux/signal.h>
#include <asm/processor.h>
#include <asm/io.h>
+#include <asm/fpu.h>
/* The PR (precision) bit in the FP Status Register must be clear when
* an frchg instruction is executed, otherwise the instruction is undefined.
diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c
index 817f9939cda..8020796139f 100644
--- a/arch/sh/kernel/cpu/sh4/fpu.c
+++ b/arch/sh/kernel/cpu/sh4/fpu.c
@@ -16,6 +16,7 @@
#include <asm/cpu/fpu.h>
#include <asm/processor.h>
#include <asm/system.h>
+#include <asm/fpu.h>
/* The PR (precision) bit in the FP Status Register must be clear when
* an frchg instruction is executed, otherwise the instruction is undefined.
diff --git a/arch/sh/kernel/cpu/sh5/fpu.c b/arch/sh/kernel/cpu/sh5/fpu.c
index 30b76a94abf..dd4f51ffb50 100644
--- a/arch/sh/kernel/cpu/sh5/fpu.c
+++ b/arch/sh/kernel/cpu/sh5/fpu.c
@@ -17,6 +17,7 @@
#include <asm/processor.h>
#include <asm/user.h>
#include <asm/io.h>
+#include <asm/fpu.h>
/*
* Initially load the FPU with signalling NANS. This bit pattern
diff --git a/arch/sh/kernel/dump_task.c b/arch/sh/kernel/dump_task.c
index 4a8a4083ff0..1db7ce0f25d 100644
--- a/arch/sh/kernel/dump_task.c
+++ b/arch/sh/kernel/dump_task.c
@@ -1,5 +1,6 @@
#include <linux/elfcore.h>
#include <linux/sched.h>
+#include <asm/fpu.h>
/*
* Capture the user space registers if the task is not running (in user space)
diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c
index 9ab1926b9d1..b98e37a1f54 100644
--- a/arch/sh/kernel/process_32.c
+++ b/arch/sh/kernel/process_32.c
@@ -25,6 +25,7 @@
#include <asm/pgalloc.h>
#include <asm/system.h>
#include <asm/ubc.h>
+#include <asm/fpu.h>
static int hlt_counter;
int ubc_usercnt = 0;
diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
index f6b5fbfe75c..f311551d9a0 100644
--- a/arch/sh/kernel/signal_32.c
+++ b/arch/sh/kernel/signal_32.c
@@ -29,6 +29,7 @@
#include <asm/uaccess.h>
#include <asm/pgtable.h>
#include <asm/cacheflush.h>
+#include <asm/fpu.h>
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c
index 94075e1a1e6..5d039d168f5 100644
--- a/arch/sh/kernel/smp.c
+++ b/arch/sh/kernel/smp.c
@@ -179,7 +179,7 @@ void smp_send_stop(void)
}
struct smp_fn_call_struct smp_fn_call = {
- .lock = SPIN_LOCK_UNLOCKED,
+ .lock = __SPIN_LOCK_UNLOCKED(smp_fn_call.lock),
.finished = ATOMIC_INIT(0),
};
diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig
index 250958d1e3c..9d4bd222949 100644
--- a/arch/sparc64/defconfig
+++ b/arch/sparc64/defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc1
-# Sun Feb 17 22:44:12 2008
+# Linux kernel version: 2.6.25-rc3
+# Wed Mar 26 04:33:35 2008
#
CONFIG_SPARC=y
CONFIG_SPARC64=y
@@ -55,9 +55,11 @@ CONFIG_POSIX_MQUEUE=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
@@ -482,6 +484,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
@@ -810,6 +813,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
diff --git a/arch/sparc64/kernel/cpu.c b/arch/sparc64/kernel/cpu.c
index dd5d28e3d79..0097c08dc60 100644
--- a/arch/sparc64/kernel/cpu.c
+++ b/arch/sparc64/kernel/cpu.c
@@ -15,6 +15,8 @@
#include <asm/spitfire.h>
#include <asm/oplib.h>
+#include "entry.h"
+
DEFINE_PER_CPU(cpuinfo_sparc, __cpu_data) = { 0 };
struct cpu_iu_info {
@@ -65,8 +67,6 @@ static struct cpu_iu_info linux_sparc_chips[] = {
char *sparc_cpu_type;
char *sparc_fpu_type;
-unsigned int fsr_storage;
-
static void __init sun4v_cpu_probe(void)
{
switch (sun4v_chip_type) {
@@ -94,8 +94,10 @@ void __init cpu_probe(void)
unsigned long ver, fpu_vers, manuf, impl, fprs;
int i;
- if (tlb_type == hypervisor)
- return sun4v_cpu_probe();
+ if (tlb_type == hypervisor) {
+ sun4v_cpu_probe();
+ return;
+ }
fprs = fprs_read();
fprs_write(FPRS_FEF);
diff --git a/arch/sparc64/kernel/ds.c b/arch/sparc64/kernel/ds.c
index bd76482077b..edb74f5a118 100644
--- a/arch/sparc64/kernel/ds.c
+++ b/arch/sparc64/kernel/ds.c
@@ -972,8 +972,7 @@ static void process_ds_work(void)
LIST_HEAD(todo);
spin_lock_irqsave(&ds_lock, flags);
- list_splice(&ds_work_list, &todo);
- INIT_LIST_HEAD(&ds_work_list);
+ list_splice_init(&ds_work_list, &todo);
spin_unlock_irqrestore(&ds_lock, flags);
list_for_each_entry_safe(qp, tmp, &todo, list) {
diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S
index 6be4d2d2904..49eca4b1cf2 100644
--- a/arch/sparc64/kernel/entry.S
+++ b/arch/sparc64/kernel/entry.S
@@ -1705,6 +1705,36 @@ __flushw_user:
2: retl
nop
+ /* Flush %fp and %i7 to the stack for all register
+ * windows active inside of the cpu. This allows
+ * show_stack_trace() to avoid using an expensive
+ * 'flushw'.
+ */
+ .globl stack_trace_flush
+ .type stack_trace_flush,#function
+stack_trace_flush:
+ rdpr %pstate, %o0
+ wrpr %o0, PSTATE_IE, %pstate
+
+ rdpr %cwp, %g1
+ rdpr %canrestore, %g2
+ sub %g1, 1, %g3
+
+1: brz,pn %g2, 2f
+ sub %g2, 1, %g2
+ wrpr %g3, %cwp
+ stx %fp, [%sp + STACK_BIAS + RW_V9_I6]
+ stx %i7, [%sp + STACK_BIAS + RW_V9_I7]
+ ba,pt %xcc, 1b
+ sub %g3, 1, %g3
+
+2: wrpr %g1, %cwp
+ wrpr %o0, %pstate
+
+ retl
+ nop
+ .size stack_trace_flush,.-stack_trace_flush
+
#ifdef CONFIG_SMP
.globl hard_smp_processor_id
hard_smp_processor_id:
diff --git a/arch/sparc64/kernel/entry.h b/arch/sparc64/kernel/entry.h
new file mode 100644
index 00000000000..4a91e9c6d31
--- /dev/null
+++ b/arch/sparc64/kernel/entry.h
@@ -0,0 +1,196 @@
+#ifndef _ENTRY_H
+#define _ENTRY_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+
+extern char *sparc_cpu_type;
+extern char *sparc_fpu_type;
+
+extern void __init per_cpu_patch(void);
+extern void __init sun4v_patch(void);
+extern void __init boot_cpu_id_too_large(int cpu);
+extern unsigned int dcache_parity_tl1_occurred;
+extern unsigned int icache_parity_tl1_occurred;
+
+extern asmlinkage void update_perfctrs(void);
+extern asmlinkage void sparc_breakpoint(struct pt_regs *regs);
+extern void timer_interrupt(int irq, struct pt_regs *regs);
+
+extern void do_notify_resume(struct pt_regs *regs,
+ unsigned long orig_i0,
+ int restart_syscall,
+ unsigned long thread_info_flags);
+
+extern asmlinkage void syscall_trace(struct pt_regs *regs,
+ int syscall_exit_p);
+
+extern void bad_trap_tl1(struct pt_regs *regs, long lvl);
+
+extern void do_fpe_common(struct pt_regs *regs);
+extern void do_fpieee(struct pt_regs *regs);
+extern void do_fpother(struct pt_regs *regs);
+extern void do_tof(struct pt_regs *regs);
+extern void do_div0(struct pt_regs *regs);
+extern void do_illegal_instruction(struct pt_regs *regs);
+extern void mem_address_unaligned(struct pt_regs *regs,
+ unsigned long sfar,
+ unsigned long sfsr);
+extern void sun4v_do_mna(struct pt_regs *regs,
+ unsigned long addr,
+ unsigned long type_ctx);
+extern void do_privop(struct pt_regs *regs);
+extern void do_privact(struct pt_regs *regs);
+extern void do_cee(struct pt_regs *regs);
+extern void do_cee_tl1(struct pt_regs *regs);
+extern void do_dae_tl1(struct pt_regs *regs);
+extern void do_iae_tl1(struct pt_regs *regs);
+extern void do_div0_tl1(struct pt_regs *regs);
+extern void do_fpdis_tl1(struct pt_regs *regs);
+extern void do_fpieee_tl1(struct pt_regs *regs);
+extern void do_fpother_tl1(struct pt_regs *regs);
+extern void do_ill_tl1(struct pt_regs *regs);
+extern void do_irq_tl1(struct pt_regs *regs);
+extern void do_lddfmna_tl1(struct pt_regs *regs);
+extern void do_stdfmna_tl1(struct pt_regs *regs);
+extern void do_paw(struct pt_regs *regs);
+extern void do_paw_tl1(struct pt_regs *regs);
+extern void do_vaw(struct pt_regs *regs);
+extern void do_vaw_tl1(struct pt_regs *regs);
+extern void do_tof_tl1(struct pt_regs *regs);
+extern void do_getpsr(struct pt_regs *regs);
+
+extern void spitfire_insn_access_exception(struct pt_regs *regs,
+ unsigned long sfsr,
+ unsigned long sfar);
+extern void spitfire_insn_access_exception_tl1(struct pt_regs *regs,
+ unsigned long sfsr,
+ unsigned long sfar);
+extern void spitfire_data_access_exception(struct pt_regs *regs,
+ unsigned long sfsr,
+ unsigned long sfar);
+extern void spitfire_data_access_exception_tl1(struct pt_regs *regs,
+ unsigned long sfsr,
+ unsigned long sfar);
+extern void spitfire_access_error(struct pt_regs *regs,
+ unsigned long status_encoded,
+ unsigned long afar);
+
+extern void cheetah_fecc_handler(struct pt_regs *regs,
+ unsigned long afsr,
+ unsigned long afar);
+extern void cheetah_cee_handler(struct pt_regs *regs,
+ unsigned long afsr,
+ unsigned long afar);
+extern void cheetah_deferred_handler(struct pt_regs *regs,
+ unsigned long afsr,
+ unsigned long afar);
+extern void cheetah_plus_parity_error(int type, struct pt_regs *regs);
+
+extern void sun4v_insn_access_exception(struct pt_regs *regs,
+ unsigned long addr,
+ unsigned long type_ctx);
+extern void sun4v_insn_access_exception_tl1(struct pt_regs *regs,
+ unsigned long addr,
+ unsigned long type_ctx);
+extern void sun4v_data_access_exception(struct pt_regs *regs,
+ unsigned long addr,
+ unsigned long type_ctx);
+extern void sun4v_data_access_exception_tl1(struct pt_regs *regs,
+ unsigned long addr,
+ unsigned long type_ctx);
+extern void sun4v_resum_error(struct pt_regs *regs,
+ unsigned long offset);
+extern void sun4v_resum_overflow(struct pt_regs *regs);
+extern void sun4v_nonresum_error(struct pt_regs *regs,
+ unsigned long offset);
+extern void sun4v_nonresum_overflow(struct pt_regs *regs);
+
+extern unsigned long sun4v_err_itlb_vaddr;
+extern unsigned long sun4v_err_itlb_ctx;
+extern unsigned long sun4v_err_itlb_pte;
+extern unsigned long sun4v_err_itlb_error;
+
+extern void sun4v_itlb_error_report(struct pt_regs *regs, int tl);
+
+extern unsigned long sun4v_err_dtlb_vaddr;
+extern unsigned long sun4v_err_dtlb_ctx;
+extern unsigned long sun4v_err_dtlb_pte;
+extern unsigned long sun4v_err_dtlb_error;
+
+extern void sun4v_dtlb_error_report(struct pt_regs *regs, int tl);
+extern void hypervisor_tlbop_error(unsigned long err,
+ unsigned long op);
+extern void hypervisor_tlbop_error_xcall(unsigned long err,
+ unsigned long op);
+
+/* WARNING: The error trap handlers in assembly know the precise
+ * layout of the following structure.
+ *
+ * C-level handlers in traps.c use this information to log the
+ * error and then determine how to recover (if possible).
+ */
+struct cheetah_err_info {
+/*0x00*/u64 afsr;
+/*0x08*/u64 afar;
+
+ /* D-cache state */
+/*0x10*/u64 dcache_data[4]; /* The actual data */
+/*0x30*/u64 dcache_index; /* D-cache index */
+/*0x38*/u64 dcache_tag; /* D-cache tag/valid */
+/*0x40*/u64 dcache_utag; /* D-cache microtag */
+/*0x48*/u64 dcache_stag; /* D-cache snooptag */
+
+ /* I-cache state */
+/*0x50*/u64 icache_data[8]; /* The actual insns + predecode */
+/*0x90*/u64 icache_index; /* I-cache index */
+/*0x98*/u64 icache_tag; /* I-cache phys tag */
+/*0xa0*/u64 icache_utag; /* I-cache microtag */
+/*0xa8*/u64 icache_stag; /* I-cache snooptag */
+/*0xb0*/u64 icache_upper; /* I-cache upper-tag */
+/*0xb8*/u64 icache_lower; /* I-cache lower-tag */
+
+ /* E-cache state */
+/*0xc0*/u64 ecache_data[4]; /* 32 bytes from staging registers */
+/*0xe0*/u64 ecache_index; /* E-cache index */
+/*0xe8*/u64 ecache_tag; /* E-cache tag/state */
+
+/*0xf0*/u64 __pad[32 - 30];
+};
+#define CHAFSR_INVALID ((u64)-1L)
+
+/* This is allocated at boot time based upon the largest hardware
+ * cpu ID in the system. We allocate two entries per cpu, one for
+ * TL==0 logging and one for TL >= 1 logging.
+ */
+extern struct cheetah_err_info *cheetah_error_log;
+
+/* UPA nodes send interrupt packet to UltraSparc with first data reg
+ * value low 5 (7 on Starfire) bits holding the IRQ identifier being
+ * delivered. We must translate this into a non-vector IRQ so we can
+ * set the softint on this cpu.
+ *
+ * To make processing these packets efficient and race free we use
+ * an array of irq buckets below. The interrupt vector handler in
+ * entry.S feeds incoming packets into per-cpu pil-indexed lists.
+ *
+ * If you make changes to ino_bucket, please update hand coded assembler
+ * of the vectored interrupt trap handler(s) in entry.S and sun4v_ivec.S
+ */
+struct ino_bucket {
+/*0x00*/unsigned long __irq_chain_pa;
+
+ /* Virtual interrupt number assigned to this INO. */
+/*0x08*/unsigned int __virt_irq;
+/*0x0c*/unsigned int __pad;
+};
+
+extern struct ino_bucket *ivector_table;
+extern unsigned long ivector_table_pa;
+
+extern void handler_irq(int irq, struct pt_regs *regs);
+extern void init_irqwork_curcpu(void);
+extern void __cpuinit sun4v_register_mondo_queues(int this_cpu);
+
+#endif /* _ENTRY_H */
diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S
index 44b105c04dd..34f8ff57c56 100644
--- a/arch/sparc64/kernel/head.S
+++ b/arch/sparc64/kernel/head.S
@@ -288,8 +288,12 @@ sun4v_chip_type:
/* Leave arg2 as-is, prom_mmu_ihandle_cache */
mov -1, %l3
stx %l3, [%sp + 2047 + 128 + 0x28] ! arg3: mode (-1 default)
- sethi %hi(8 * 1024 * 1024), %l3
- stx %l3, [%sp + 2047 + 128 + 0x30] ! arg4: size (8MB)
+ /* 4MB align the kernel image size. */
+ set (_end - KERNBASE), %l3
+ set ((4 * 1024 * 1024) - 1), %l4
+ add %l3, %l4, %l3
+ andn %l3, %l4, %l3
+ stx %l3, [%sp + 2047 + 128 + 0x30] ! arg4: roundup(ksize, 4MB)
sethi %hi(KERNBASE), %l3
stx %l3, [%sp + 2047 + 128 + 0x38] ! arg5: vaddr (KERNBASE)
stx %g0, [%sp + 2047 + 128 + 0x40] ! arg6: empty
diff --git a/arch/sparc64/kernel/iommu.c b/arch/sparc64/kernel/iommu.c
index fbaab3497bf..756fa24eeef 100644
--- a/arch/sparc64/kernel/iommu.c
+++ b/arch/sparc64/kernel/iommu.c
@@ -516,9 +516,11 @@ static int dma_4u_map_sg(struct device *dev, struct scatterlist *sglist,
unsigned long flags, handle, prot, ctx;
dma_addr_t dma_next = 0, dma_addr;
unsigned int max_seg_size;
+ unsigned long seg_boundary_size;
int outcount, incount, i;
struct strbuf *strbuf;
struct iommu *iommu;
+ unsigned long base_shift;
BUG_ON(direction == DMA_NONE);
@@ -549,8 +551,11 @@ static int dma_4u_map_sg(struct device *dev, struct scatterlist *sglist,
outs->dma_length = 0;
max_seg_size = dma_get_max_seg_size(dev);
+ seg_boundary_size = ALIGN(dma_get_seg_boundary(dev) + 1,
+ IO_PAGE_SIZE) >> IO_PAGE_SHIFT;
+ base_shift = iommu->page_table_map_base >> IO_PAGE_SHIFT;
for_each_sg(sglist, s, nelems, i) {
- unsigned long paddr, npages, entry, slen;
+ unsigned long paddr, npages, entry, out_entry = 0, slen;
iopte_t *base;
slen = s->length;
@@ -593,7 +598,9 @@ static int dma_4u_map_sg(struct device *dev, struct scatterlist *sglist,
* - allocated dma_addr isn't contiguous to previous allocation
*/
if ((dma_addr != dma_next) ||
- (outs->dma_length + s->length > max_seg_size)) {
+ (outs->dma_length + s->length > max_seg_size) ||
+ (is_span_boundary(out_entry, base_shift,
+ seg_boundary_size, outs, s))) {
/* Can't merge: create a new segment */
segstart = s;
outcount++;
@@ -607,6 +614,7 @@ static int dma_4u_map_sg(struct device *dev, struct scatterlist *sglist,
/* This is a new segment, fill entries */
outs->dma_address = dma_addr;
outs->dma_length = slen;
+ out_entry = entry;
}
/* Calculate next page pointer for contiguous check */
@@ -626,7 +634,7 @@ static int dma_4u_map_sg(struct device *dev, struct scatterlist *sglist,
iommu_map_failed:
for_each_sg(sglist, s, nelems, i) {
if (s->dma_length != 0) {
- unsigned long vaddr, npages, entry, i;
+ unsigned long vaddr, npages, entry, j;
iopte_t *base;
vaddr = s->dma_address & IO_PAGE_MASK;
@@ -637,8 +645,8 @@ iommu_map_failed:
>> IO_PAGE_SHIFT;
base = iommu->page_table + entry;
- for (i = 0; i < npages; i++)
- iopte_make_dummy(iommu, base + i);
+ for (j = 0; j < npages; j++)
+ iopte_make_dummy(iommu, base + j);
s->dma_address = DMA_ERROR_CODE;
s->dma_length = 0;
@@ -803,7 +811,7 @@ static void dma_4u_sync_sg_for_cpu(struct device *dev,
spin_unlock_irqrestore(&iommu->lock, flags);
}
-const struct dma_ops sun4u_dma_ops = {
+static const struct dma_ops sun4u_dma_ops = {
.alloc_coherent = dma_4u_alloc_coherent,
.free_coherent = dma_4u_free_coherent,
.map_single = dma_4u_map_single,
diff --git a/arch/sparc64/kernel/iommu_common.h b/arch/sparc64/kernel/iommu_common.h
index 0713bd58499..f3575a614fa 100644
--- a/arch/sparc64/kernel/iommu_common.h
+++ b/arch/sparc64/kernel/iommu_common.h
@@ -12,6 +12,7 @@
#include <linux/mm.h>
#include <linux/scatterlist.h>
#include <linux/device.h>
+#include <linux/iommu-helper.h>
#include <asm/iommu.h>
#include <asm/scatterlist.h>
@@ -45,17 +46,16 @@ static inline unsigned long iommu_num_pages(unsigned long vaddr,
return npages;
}
-static inline unsigned long calc_npages(struct scatterlist *sglist, int nelems)
+static inline int is_span_boundary(unsigned long entry,
+ unsigned long shift,
+ unsigned long boundary_size,
+ struct scatterlist *outs,
+ struct scatterlist *sg)
{
- unsigned long i, npages = 0;
- struct scatterlist *sg;
+ unsigned long paddr = SG_ENT_PHYS_ADDRESS(outs);
+ int nr = iommu_num_pages(paddr, outs->dma_length + sg->length);
- for_each_sg(sglist, sg, nelems, i) {
- unsigned long paddr = SG_ENT_PHYS_ADDRESS(sg);
- npages += iommu_num_pages(paddr, sg->length);
- }
-
- return npages;
+ return iommu_is_span_boundary(entry, nr, shift, boundary_size);
}
extern unsigned long iommu_range_alloc(struct device *dev,
diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c
index 5ec06c8c7fe..eb88bd6e674 100644
--- a/arch/sparc64/kernel/irq.c
+++ b/arch/sparc64/kernel/irq.c
@@ -44,27 +44,10 @@
#include <asm/hypervisor.h>
#include <asm/cacheflush.h>
-/* UPA nodes send interrupt packet to UltraSparc with first data reg
- * value low 5 (7 on Starfire) bits holding the IRQ identifier being
- * delivered. We must translate this into a non-vector IRQ so we can
- * set the softint on this cpu.
- *
- * To make processing these packets efficient and race free we use
- * an array of irq buckets below. The interrupt vector handler in
- * entry.S feeds incoming packets into per-cpu pil-indexed lists.
- *
- * If you make changes to ino_bucket, please update hand coded assembler
- * of the vectored interrupt trap handler(s) in entry.S and sun4v_ivec.S
- */
-struct ino_bucket {
-/*0x00*/unsigned long __irq_chain_pa;
-
- /* Virtual interrupt number assigned to this INO. */
-/*0x08*/unsigned int __virt_irq;
-/*0x0c*/unsigned int __pad;
-};
+#include "entry.h"
#define NUM_IVECS (IMAP_INR + 1)
+
struct ino_bucket *ivector_table;
unsigned long ivector_table_pa;
diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c
index ddca6c6c0b4..01839706bd5 100644
--- a/arch/sparc64/kernel/pci_sun4v.c
+++ b/arch/sparc64/kernel/pci_sun4v.c
@@ -335,8 +335,10 @@ static int dma_4v_map_sg(struct device *dev, struct scatterlist *sglist,
unsigned long flags, handle, prot;
dma_addr_t dma_next = 0, dma_addr;
unsigned int max_seg_size;
+ unsigned long seg_boundary_size;
int outcount, incount, i;
struct iommu *iommu;
+ unsigned long base_shift;
long err;
BUG_ON(direction == DMA_NONE);
@@ -362,8 +364,11 @@ static int dma_4v_map_sg(struct device *dev, struct scatterlist *sglist,
iommu_batch_start(dev, prot, ~0UL);
max_seg_size = dma_get_max_seg_size(dev);
+ seg_boundary_size = ALIGN(dma_get_seg_boundary(dev) + 1,
+ IO_PAGE_SIZE) >> IO_PAGE_SHIFT;
+ base_shift = iommu->page_table_map_base >> IO_PAGE_SHIFT;
for_each_sg(sglist, s, nelems, i) {
- unsigned long paddr, npages, entry, slen;
+ unsigned long paddr, npages, entry, out_entry = 0, slen;
slen = s->length;
/* Sanity check */
@@ -406,7 +411,9 @@ static int dma_4v_map_sg(struct device *dev, struct scatterlist *sglist,
* - allocated dma_addr isn't contiguous to previous allocation
*/
if ((dma_addr != dma_next) ||
- (outs->dma_length + s->length > max_seg_size)) {
+ (outs->dma_length + s->length > max_seg_size) ||
+ (is_span_boundary(out_entry, base_shift,
+ seg_boundary_size, outs, s))) {
/* Can't merge: create a new segment */
segstart = s;
outcount++;
@@ -420,6 +427,7 @@ static int dma_4v_map_sg(struct device *dev, struct scatterlist *sglist,
/* This is a new segment, fill entries */
outs->dma_address = dma_addr;
outs->dma_length = slen;
+ out_entry = entry;
}
/* Calculate next page pointer for contiguous check */
diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c
index e116e38b160..acf8c5250aa 100644
--- a/arch/sparc64/kernel/process.c
+++ b/arch/sparc64/kernel/process.c
@@ -731,9 +731,6 @@ asmlinkage int sparc_execve(struct pt_regs *regs)
current_thread_info()->xfsr[0] = 0;
current_thread_info()->fpsaved[0] = 0;
regs->tstate &= ~TSTATE_PEF;
- task_lock(current);
- current->ptrace &= ~PT_DTRACE;
- task_unlock(current);
}
out:
return error;
diff --git a/arch/sparc64/kernel/ptrace.c b/arch/sparc64/kernel/ptrace.c
index 9a1ba1fe859..aaae865e793 100644
--- a/arch/sparc64/kernel/ptrace.c
+++ b/arch/sparc64/kernel/ptrace.c
@@ -35,6 +35,9 @@
#include <asm/spitfire.h>
#include <asm/page.h>
#include <asm/cpudata.h>
+#include <asm/cacheflush.h>
+
+#include "entry.h"
/* #define ALLOW_INIT_TRACING */
@@ -67,6 +70,8 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
if (tlb_type == hypervisor)
return;
+ preempt_disable();
+
#ifdef DCACHE_ALIASING_POSSIBLE
/* If bit 13 of the kernel address we used to access the
* user page is the same as the virtual address that page
@@ -105,6 +110,8 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
for (; start < end; start += icache_line_size)
flushi(start);
}
+
+ preempt_enable();
}
enum sparc_regset {
@@ -382,6 +389,7 @@ static const struct user_regset_view user_sparc64_view = {
.regsets = sparc64_regsets, .n = ARRAY_SIZE(sparc64_regsets)
};
+#ifdef CONFIG_COMPAT
static int genregs32_get(struct task_struct *target,
const struct user_regset *regset,
unsigned int pos, unsigned int count,
@@ -676,14 +684,18 @@ static const struct user_regset_view user_sparc32_view = {
.name = "sparc", .e_machine = EM_SPARC,
.regsets = sparc32_regsets, .n = ARRAY_SIZE(sparc32_regsets)
};
+#endif /* CONFIG_COMPAT */
const struct user_regset_view *task_user_regset_view(struct task_struct *task)
{
+#ifdef CONFIG_COMPAT
if (test_tsk_thread_flag(task, TIF_32BIT))
return &user_sparc32_view;
+#endif
return &user_sparc64_view;
}
+#ifdef CONFIG_COMPAT
struct compat_fps {
unsigned int regs[32];
unsigned int fsr;
@@ -798,6 +810,7 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
return ret;
}
+#endif /* CONFIG_COMPAT */
struct fps {
unsigned int regs[64];
@@ -807,11 +820,14 @@ struct fps {
long arch_ptrace(struct task_struct *child, long request, long addr, long data)
{
const struct user_regset_view *view = task_user_regset_view(child);
- struct pt_regs __user *pregs = (struct pt_regs __user *) addr;
unsigned long addr2 = task_pt_regs(current)->u_regs[UREG_I4];
- struct fps __user *fps = (struct fps __user *) addr;
+ struct pt_regs __user *pregs;
+ struct fps __user *fps;
int ret;
+ pregs = (struct pt_regs __user *) (unsigned long) addr;
+ fps = (struct fps __user *) (unsigned long) addr;
+
switch (request) {
case PTRACE_PEEKUSR:
ret = (addr != 0) ? -EIO : 0;
diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c
index d036dbe7286..6acb4c51cfe 100644
--- a/arch/sparc64/kernel/setup.c
+++ b/arch/sparc64/kernel/setup.c
@@ -51,6 +51,8 @@
#include <net/ipconfig.h>
#endif
+#include "entry.h"
+
/* Used to synchronize accesses to NatSemi SUPER I/O chip configure
* operations in asm/ns87303.h
*/
@@ -335,9 +337,6 @@ void __init setup_arch(char **cmdline_p)
/* BUFFER is PAGE_SIZE bytes long. */
-extern char *sparc_cpu_type;
-extern char *sparc_fpu_type;
-
extern void smp_info(struct seq_file *);
extern void smp_bogo(struct seq_file *);
extern void mmu_info(struct seq_file *);
diff --git a/arch/sparc64/kernel/signal.c b/arch/sparc64/kernel/signal.c
index fb13775b368..94a9d64208e 100644
--- a/arch/sparc64/kernel/signal.c
+++ b/arch/sparc64/kernel/signal.c
@@ -32,6 +32,9 @@
#include <asm/siginfo.h>
#include <asm/visasm.h>
+#include "entry.h"
+#include "systbls.h"
+
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
/* {set, get}context() needed for 64-bit SparcLinux userland. */
diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index cc454731d87..59f020d69d4 100644
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -1,6 +1,6 @@
/* smp.c: Sparc64 SMP support.
*
- * Copyright (C) 1997, 2007 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1997, 2007, 2008 David S. Miller (davem@davemloft.net)
*/
#include <linux/module.h>
@@ -30,6 +30,7 @@
#include <asm/cpudata.h>
#include <asm/hvtramp.h>
#include <asm/io.h>
+#include <asm/timer.h>
#include <asm/irq.h>
#include <asm/irq_regs.h>
@@ -284,14 +285,17 @@ static void ldom_startcpu_cpuid(unsigned int cpu, unsigned long thread_reg)
{
extern unsigned long sparc64_ttable_tl0;
extern unsigned long kern_locked_tte_data;
- extern int bigkernel;
struct hvtramp_descr *hdesc;
unsigned long trampoline_ra;
struct trap_per_cpu *tb;
u64 tte_vaddr, tte_data;
unsigned long hv_err;
+ int i;
- hdesc = kzalloc(sizeof(*hdesc), GFP_KERNEL);
+ hdesc = kzalloc(sizeof(*hdesc) +
+ (sizeof(struct hvtramp_mapping) *
+ num_kernel_image_mappings - 1),
+ GFP_KERNEL);
if (!hdesc) {
printk(KERN_ERR "ldom_startcpu_cpuid: Cannot allocate "
"hvtramp_descr.\n");
@@ -299,7 +303,7 @@ static void ldom_startcpu_cpuid(unsigned int cpu, unsigned long thread_reg)
}
hdesc->cpu = cpu;
- hdesc->num_mappings = (bigkernel ? 2 : 1);
+ hdesc->num_mappings = num_kernel_image_mappings;
tb = &trap_block[cpu];
tb->hdesc = hdesc;
@@ -312,13 +316,11 @@ static void ldom_startcpu_cpuid(unsigned int cpu, unsigned long thread_reg)
tte_vaddr = (unsigned long) KERNBASE;
tte_data = kern_locked_tte_data;
- hdesc->maps[0].vaddr = tte_vaddr;
- hdesc->maps[0].tte = tte_data;
- if (bigkernel) {
+ for (i = 0; i < hdesc->num_mappings; i++) {
+ hdesc->maps[i].vaddr = tte_vaddr;
+ hdesc->maps[i].tte = tte_data;
tte_vaddr += 0x400000;
tte_data += 0x400000;
- hdesc->maps[1].vaddr = tte_vaddr;
- hdesc->maps[1].tte = tte_data;
}
trampoline_ra = kimage_addr_to_ra(hv_cpu_startup);
diff --git a/arch/sparc64/kernel/stacktrace.c b/arch/sparc64/kernel/stacktrace.c
index 47f92a59be1..84d39e873e8 100644
--- a/arch/sparc64/kernel/stacktrace.c
+++ b/arch/sparc64/kernel/stacktrace.c
@@ -2,13 +2,15 @@
#include <linux/stacktrace.h>
#include <linux/thread_info.h>
#include <asm/ptrace.h>
+#include <asm/stacktrace.h>
void save_stack_trace(struct stack_trace *trace)
{
unsigned long ksp, fp, thread_base;
struct thread_info *tp = task_thread_info(current);
- flushw_all();
+ stack_trace_flush();
+
__asm__ __volatile__(
"mov %%fp, %0"
: "=r" (ksp)
diff --git a/arch/sparc64/kernel/sys_sparc.c b/arch/sparc64/kernel/sys_sparc.c
index 134d801579f..f952745d0f3 100644
--- a/arch/sparc64/kernel/sys_sparc.c
+++ b/arch/sparc64/kernel/sys_sparc.c
@@ -1,5 +1,4 @@
-/* $Id: sys_sparc.c,v 1.57 2002/02/09 19:49:30 davem Exp $
- * linux/arch/sparc64/kernel/sys_sparc.c
+/* linux/arch/sparc64/kernel/sys_sparc.c
*
* This file contains various random system calls that
* have a non-standard calling sequence on the Linux/sparc
@@ -30,6 +29,9 @@
#include <asm/perfctr.h>
#include <asm/unistd.h>
+#include "entry.h"
+#include "systbls.h"
+
/* #define DEBUG_UNIMP_SYSCALL */
asmlinkage unsigned long sys_getpagesize(void)
@@ -445,7 +447,8 @@ asmlinkage long sys_ipc(unsigned int call, int first, unsigned long second,
goto out;
case SEMTIMEDOP:
err = sys_semtimedop(first, ptr, (unsigned)second,
- (const struct timespec __user *) fifth);
+ (const struct timespec __user *)
+ (unsigned long) fifth);
goto out;
case SEMGET:
err = sys_semget(first, (int)second, (int)third);
@@ -788,7 +791,7 @@ asmlinkage long sys_utrap_install(utrap_entry_t type,
} else {
if ((utrap_handler_t)current_thread_info()->utraps[type] != new_p &&
current_thread_info()->utraps[0] > 1) {
- long *p = current_thread_info()->utraps;
+ unsigned long *p = current_thread_info()->utraps;
current_thread_info()->utraps =
kmalloc((UT_TRAP_INSTRUCTION_31+1)*sizeof(long),
@@ -816,7 +819,8 @@ asmlinkage long sys_utrap_install(utrap_entry_t type,
return 0;
}
-long sparc_memory_ordering(unsigned long model, struct pt_regs *regs)
+asmlinkage long sparc_memory_ordering(unsigned long model,
+ struct pt_regs *regs)
{
if (model >= 3)
return -EINVAL;
diff --git a/arch/sparc64/kernel/sys_sparc32.c b/arch/sparc64/kernel/sys_sparc32.c
index deaba2bd053..2455fa49887 100644
--- a/arch/sparc64/kernel/sys_sparc32.c
+++ b/arch/sparc64/kernel/sys_sparc32.c
@@ -678,9 +678,6 @@ asmlinkage long sparc32_execve(struct pt_regs *regs)
current_thread_info()->xfsr[0] = 0;
current_thread_info()->fpsaved[0] = 0;
regs->tstate &= ~TSTATE_PEF;
- task_lock(current);
- current->ptrace &= ~PT_DTRACE;
- task_unlock(current);
}
out:
return error;
diff --git a/arch/sparc64/kernel/systbls.h b/arch/sparc64/kernel/systbls.h
new file mode 100644
index 00000000000..8a0d20a35d0
--- /dev/null
+++ b/arch/sparc64/kernel/systbls.h
@@ -0,0 +1,53 @@
+#ifndef _SYSTBLS_H
+#define _SYSTBLS_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/utsname.h>
+#include <asm/utrap.h>
+#include <asm/signal.h>
+
+extern asmlinkage unsigned long sys_getpagesize(void);
+extern asmlinkage unsigned long sparc_brk(unsigned long brk);
+extern asmlinkage long sparc_pipe(struct pt_regs *regs);
+extern asmlinkage long sys_ipc(unsigned int call, int first,
+ unsigned long second,
+ unsigned long third,
+ void __user *ptr, long fifth);
+extern asmlinkage long sparc64_newuname(struct new_utsname __user *name);
+extern asmlinkage long sparc64_personality(unsigned long personality);
+extern asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, unsigned long off);
+extern asmlinkage long sys64_munmap(unsigned long addr, size_t len);
+extern asmlinkage unsigned long sys64_mremap(unsigned long addr,
+ unsigned long old_len,
+ unsigned long new_len,
+ unsigned long flags,
+ unsigned long new_addr);
+extern asmlinkage unsigned long c_sys_nis_syscall(struct pt_regs *regs);
+extern asmlinkage long sys_getdomainname(char __user *name, int len);
+extern asmlinkage long solaris_syscall(struct pt_regs *regs);
+extern asmlinkage long sunos_syscall(struct pt_regs *regs);
+extern asmlinkage long sys_utrap_install(utrap_entry_t type,
+ utrap_handler_t new_p,
+ utrap_handler_t new_d,
+ utrap_handler_t __user *old_p,
+ utrap_handler_t __user *old_d);
+extern asmlinkage long sparc_memory_ordering(unsigned long model,
+ struct pt_regs *regs);
+extern asmlinkage long sys_rt_sigaction(int sig,
+ const struct sigaction __user *act,
+ struct sigaction __user *oact,
+ void __user *restorer,
+ size_t sigsetsize);
+extern asmlinkage long sys_perfctr(int opcode, unsigned long arg0,
+ unsigned long arg1, unsigned long arg2);
+
+extern asmlinkage void sparc64_set_context(struct pt_regs *regs);
+extern asmlinkage void sparc64_get_context(struct pt_regs *regs);
+extern asmlinkage long sys_sigpause(unsigned int set);
+extern asmlinkage long sys_sigsuspend(old_sigset_t set);
+extern void do_rt_sigreturn(struct pt_regs *regs);
+
+#endif /* _SYSTBLS_H */
diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c
index d204f1ab1d4..e5d238970c7 100644
--- a/arch/sparc64/kernel/time.c
+++ b/arch/sparc64/kernel/time.c
@@ -1,7 +1,6 @@
-/* $Id: time.c,v 1.42 2002/01/23 14:33:55 davem Exp $
- * time.c: UltraSparc timer and TOD clock support.
+/* time.c: UltraSparc timer and TOD clock support.
*
- * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1997, 2008 David S. Miller (davem@davemloft.net)
* Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be)
*
* Based largely on code which is:
@@ -48,6 +47,8 @@
#include <asm/uaccess.h>
#include <asm/irq_regs.h>
+#include "entry.h"
+
DEFINE_SPINLOCK(mostek_lock);
DEFINE_SPINLOCK(rtc_lock);
void __iomem *mstk48t02_regs = NULL;
@@ -508,6 +509,37 @@ static int __init has_low_battery(void)
return (data1 == data2); /* Was the write blocked? */
}
+static void __init mostek_set_system_time(void __iomem *mregs)
+{
+ unsigned int year, mon, day, hour, min, sec;
+ u8 tmp;
+
+ spin_lock_irq(&mostek_lock);
+
+ /* Traditional Mostek chip. */
+ tmp = mostek_read(mregs + MOSTEK_CREG);
+ tmp |= MSTK_CREG_READ;
+ mostek_write(mregs + MOSTEK_CREG, tmp);
+
+ sec = MSTK_REG_SEC(mregs);
+ min = MSTK_REG_MIN(mregs);
+ hour = MSTK_REG_HOUR(mregs);
+ day = MSTK_REG_DOM(mregs);
+ mon = MSTK_REG_MONTH(mregs);
+ year = MSTK_CVT_YEAR( MSTK_REG_YEAR(mregs) );
+
+ xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
+ xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
+ set_normalized_timespec(&wall_to_monotonic,
+ -xtime.tv_sec, -xtime.tv_nsec);
+
+ tmp = mostek_read(mregs + MOSTEK_CREG);
+ tmp &= ~MSTK_CREG_READ;
+ mostek_write(mregs + MOSTEK_CREG, tmp);
+
+ spin_unlock_irq(&mostek_lock);
+}
+
/* Probe for the real time clock chip. */
static void __init set_system_time(void)
{
@@ -520,7 +552,6 @@ static void __init set_system_time(void)
unsigned long dregs = 0UL;
void __iomem *bregs = 0UL;
#endif
- u8 tmp;
if (!mregs && !dregs && !bregs) {
prom_printf("Something wrong, clock regs not mapped yet.\n");
@@ -528,20 +559,11 @@ static void __init set_system_time(void)
}
if (mregs) {
- spin_lock_irq(&mostek_lock);
-
- /* Traditional Mostek chip. */
- tmp = mostek_read(mregs + MOSTEK_CREG);
- tmp |= MSTK_CREG_READ;
- mostek_write(mregs + MOSTEK_CREG, tmp);
+ mostek_set_system_time(mregs);
+ return;
+ }
- sec = MSTK_REG_SEC(mregs);
- min = MSTK_REG_MIN(mregs);
- hour = MSTK_REG_HOUR(mregs);
- day = MSTK_REG_DOM(mregs);
- mon = MSTK_REG_MONTH(mregs);
- year = MSTK_CVT_YEAR( MSTK_REG_YEAR(mregs) );
- } else if (bregs) {
+ if (bregs) {
unsigned char val = readb(bregs + 0x0e);
unsigned int century;
@@ -596,14 +618,6 @@ static void __init set_system_time(void)
xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
set_normalized_timespec(&wall_to_monotonic,
-xtime.tv_sec, -xtime.tv_nsec);
-
- if (mregs) {
- tmp = mostek_read(mregs + MOSTEK_CREG);
- tmp &= ~MSTK_CREG_READ;
- mostek_write(mregs + MOSTEK_CREG, tmp);
-
- spin_unlock_irq(&mostek_lock);
- }
}
/* davem suggests we keep this within the 4M locked kernel image */
@@ -1027,7 +1041,7 @@ void __init time_init(void)
setup_clockevent_multiplier(clock);
sparc64_clockevent.max_delta_ns =
- clockevent_delta2ns(0x7fffffffffffffff, &sparc64_clockevent);
+ clockevent_delta2ns(0x7fffffffffffffffUL, &sparc64_clockevent);
sparc64_clockevent.min_delta_ns =
clockevent_delta2ns(0xF, &sparc64_clockevent);
diff --git a/arch/sparc64/kernel/trampoline.S b/arch/sparc64/kernel/trampoline.S
index 4ae2e525d68..56ff5521134 100644
--- a/arch/sparc64/kernel/trampoline.S
+++ b/arch/sparc64/kernel/trampoline.S
@@ -105,7 +105,7 @@ startup_continue:
wr %g2, 0, %tick_cmpr
/* Call OBP by hand to lock KERNBASE into i/d tlbs.
- * We lock 2 consequetive entries if we are 'bigkernel'.
+ * We lock 'num_kernel_image_mappings' consequetive entries.
*/
sethi %hi(prom_entry_lock), %g2
1: ldstub [%g2 + %lo(prom_entry_lock)], %g1
@@ -119,6 +119,29 @@ startup_continue:
add %l2, -(192 + 128), %sp
flushw
+ /* Setup the loop variables:
+ * %l3: VADDR base
+ * %l4: TTE base
+ * %l5: Loop iterator, iterates from 0 to 'num_kernel_image_mappings'
+ * %l6: Number of TTE entries to map
+ * %l7: Highest TTE entry number, we count down
+ */
+ sethi %hi(KERNBASE), %l3
+ sethi %hi(kern_locked_tte_data), %l4
+ ldx [%l4 + %lo(kern_locked_tte_data)], %l4
+ clr %l5
+ sethi %hi(num_kernel_image_mappings), %l6
+ lduw [%l6 + %lo(num_kernel_image_mappings)], %l6
+ add %l6, 1, %l6
+
+ mov 15, %l7
+ BRANCH_IF_ANY_CHEETAH(g1,g5,2f)
+
+ mov 63, %l7
+2:
+
+3:
+ /* Lock into I-MMU */
sethi %hi(call_method), %g2
or %g2, %lo(call_method), %g2
stx %g2, [%sp + 2047 + 128 + 0x00]
@@ -132,63 +155,26 @@ startup_continue:
sethi %hi(prom_mmu_ihandle_cache), %g2
lduw [%g2 + %lo(prom_mmu_ihandle_cache)], %g2
stx %g2, [%sp + 2047 + 128 + 0x20]
- sethi %hi(KERNBASE), %g2
- stx %g2, [%sp + 2047 + 128 + 0x28]
- sethi %hi(kern_locked_tte_data), %g2
- ldx [%g2 + %lo(kern_locked_tte_data)], %g2
- stx %g2, [%sp + 2047 + 128 + 0x30]
-
- mov 15, %g2
- BRANCH_IF_ANY_CHEETAH(g1,g5,1f)
- mov 63, %g2
-1:
- stx %g2, [%sp + 2047 + 128 + 0x38]
- sethi %hi(p1275buf), %g2
- or %g2, %lo(p1275buf), %g2
- ldx [%g2 + 0x08], %o1
- call %o1
- add %sp, (2047 + 128), %o0
+ /* Each TTE maps 4MB, convert index to offset. */
+ sllx %l5, 22, %g1
- sethi %hi(bigkernel), %g2
- lduw [%g2 + %lo(bigkernel)], %g2
- brz,pt %g2, do_dtlb
- nop
+ add %l3, %g1, %g2
+ stx %g2, [%sp + 2047 + 128 + 0x28] ! VADDR
+ add %l4, %g1, %g2
+ stx %g2, [%sp + 2047 + 128 + 0x30] ! TTE
- sethi %hi(call_method), %g2
- or %g2, %lo(call_method), %g2
- stx %g2, [%sp + 2047 + 128 + 0x00]
- mov 5, %g2
- stx %g2, [%sp + 2047 + 128 + 0x08]
- mov 1, %g2
- stx %g2, [%sp + 2047 + 128 + 0x10]
- sethi %hi(itlb_load), %g2
- or %g2, %lo(itlb_load), %g2
- stx %g2, [%sp + 2047 + 128 + 0x18]
- sethi %hi(prom_mmu_ihandle_cache), %g2
- lduw [%g2 + %lo(prom_mmu_ihandle_cache)], %g2
- stx %g2, [%sp + 2047 + 128 + 0x20]
- sethi %hi(KERNBASE + 0x400000), %g2
- stx %g2, [%sp + 2047 + 128 + 0x28]
- sethi %hi(kern_locked_tte_data), %g2
- ldx [%g2 + %lo(kern_locked_tte_data)], %g2
- sethi %hi(0x400000), %g1
- add %g2, %g1, %g2
- stx %g2, [%sp + 2047 + 128 + 0x30]
-
- mov 14, %g2
- BRANCH_IF_ANY_CHEETAH(g1,g5,1f)
-
- mov 62, %g2
-1:
+ /* TTE index is highest minus loop index. */
+ sub %l7, %l5, %g2
stx %g2, [%sp + 2047 + 128 + 0x38]
+
sethi %hi(p1275buf), %g2
or %g2, %lo(p1275buf), %g2
ldx [%g2 + 0x08], %o1
call %o1
add %sp, (2047 + 128), %o0
-do_dtlb:
+ /* Lock into D-MMU */
sethi %hi(call_method), %g2
or %g2, %lo(call_method), %g2
stx %g2, [%sp + 2047 + 128 + 0x00]
@@ -202,65 +188,30 @@ do_dtlb:
sethi %hi(prom_mmu_ihandle_cache), %g2
lduw [%g2 + %lo(prom_mmu_ihandle_cache)], %g2
stx %g2, [%sp + 2047 + 128 + 0x20]
- sethi %hi(KERNBASE), %g2
- stx %g2, [%sp + 2047 + 128 + 0x28]
- sethi %hi(kern_locked_tte_data), %g2
- ldx [%g2 + %lo(kern_locked_tte_data)], %g2
- stx %g2, [%sp + 2047 + 128 + 0x30]
- mov 15, %g2
- BRANCH_IF_ANY_CHEETAH(g1,g5,1f)
+ /* Each TTE maps 4MB, convert index to offset. */
+ sllx %l5, 22, %g1
- mov 63, %g2
-1:
+ add %l3, %g1, %g2
+ stx %g2, [%sp + 2047 + 128 + 0x28] ! VADDR
+ add %l4, %g1, %g2
+ stx %g2, [%sp + 2047 + 128 + 0x30] ! TTE
+ /* TTE index is highest minus loop index. */
+ sub %l7, %l5, %g2
stx %g2, [%sp + 2047 + 128 + 0x38]
+
sethi %hi(p1275buf), %g2
or %g2, %lo(p1275buf), %g2
ldx [%g2 + 0x08], %o1
call %o1
add %sp, (2047 + 128), %o0
- sethi %hi(bigkernel), %g2
- lduw [%g2 + %lo(bigkernel)], %g2
- brz,pt %g2, do_unlock
+ add %l5, 1, %l5
+ cmp %l5, %l6
+ bne,pt %xcc, 3b
nop
- sethi %hi(call_method), %g2
- or %g2, %lo(call_method), %g2
- stx %g2, [%sp + 2047 + 128 + 0x00]
- mov 5, %g2
- stx %g2, [%sp + 2047 + 128 + 0x08]
- mov 1, %g2
- stx %g2, [%sp + 2047 + 128 + 0x10]
- sethi %hi(dtlb_load), %g2
- or %g2, %lo(dtlb_load), %g2
- stx %g2, [%sp + 2047 + 128 + 0x18]
- sethi %hi(prom_mmu_ihandle_cache), %g2
- lduw [%g2 + %lo(prom_mmu_ihandle_cache)], %g2
- stx %g2, [%sp + 2047 + 128 + 0x20]
- sethi %hi(KERNBASE + 0x400000), %g2
- stx %g2, [%sp + 2047 + 128 + 0x28]
- sethi %hi(kern_locked_tte_data), %g2
- ldx [%g2 + %lo(kern_locked_tte_data)], %g2
- sethi %hi(0x400000), %g1
- add %g2, %g1, %g2
- stx %g2, [%sp + 2047 + 128 + 0x30]
-
- mov 14, %g2
- BRANCH_IF_ANY_CHEETAH(g1,g5,1f)
-
- mov 62, %g2
-1:
-
- stx %g2, [%sp + 2047 + 128 + 0x38]
- sethi %hi(p1275buf), %g2
- or %g2, %lo(p1275buf), %g2
- ldx [%g2 + 0x08], %o1
- call %o1
- add %sp, (2047 + 128), %o0
-
-do_unlock:
sethi %hi(prom_entry_lock), %g2
stb %g0, [%g2 + %lo(prom_entry_lock)]
membar #StoreStore | #StoreLoad
@@ -269,47 +220,36 @@ do_unlock:
nop
niagara_lock_tlb:
+ sethi %hi(KERNBASE), %l3
+ sethi %hi(kern_locked_tte_data), %l4
+ ldx [%l4 + %lo(kern_locked_tte_data)], %l4
+ clr %l5
+ sethi %hi(num_kernel_image_mappings), %l6
+ lduw [%l6 + %lo(num_kernel_image_mappings)], %l6
+ add %l6, 1, %l6
+
+1:
mov HV_FAST_MMU_MAP_PERM_ADDR, %o5
- sethi %hi(KERNBASE), %o0
+ sllx %l5, 22, %g2
+ add %l3, %g2, %o0
clr %o1
- sethi %hi(kern_locked_tte_data), %o2
- ldx [%o2 + %lo(kern_locked_tte_data)], %o2
+ add %l4, %g2, %o2
mov HV_MMU_IMMU, %o3
ta HV_FAST_TRAP
mov HV_FAST_MMU_MAP_PERM_ADDR, %o5
- sethi %hi(KERNBASE), %o0
+ sllx %l5, 22, %g2
+ add %l3, %g2, %o0
clr %o1
- sethi %hi(kern_locked_tte_data), %o2
- ldx [%o2 + %lo(kern_locked_tte_data)], %o2
+ add %l4, %g2, %o2
mov HV_MMU_DMMU, %o3
ta HV_FAST_TRAP
- sethi %hi(bigkernel), %g2
- lduw [%g2 + %lo(bigkernel)], %g2
- brz,pt %g2, after_lock_tlb
+ add %l5, 1, %l5
+ cmp %l5, %l6
+ bne,pt %xcc, 1b
nop
- mov HV_FAST_MMU_MAP_PERM_ADDR, %o5
- sethi %hi(KERNBASE + 0x400000), %o0
- clr %o1
- sethi %hi(kern_locked_tte_data), %o2
- ldx [%o2 + %lo(kern_locked_tte_data)], %o2
- sethi %hi(0x400000), %o3
- add %o2, %o3, %o2
- mov HV_MMU_IMMU, %o3
- ta HV_FAST_TRAP
-
- mov HV_FAST_MMU_MAP_PERM_ADDR, %o5
- sethi %hi(KERNBASE + 0x400000), %o0
- clr %o1
- sethi %hi(kern_locked_tte_data), %o2
- ldx [%o2 + %lo(kern_locked_tte_data)], %o2
- sethi %hi(0x400000), %o3
- add %o2, %o3, %o2
- mov HV_MMU_DMMU, %o3
- ta HV_FAST_TRAP
-
after_lock_tlb:
wrpr %g0, (PSTATE_PRIV | PSTATE_PEF), %pstate
wr %g0, 0, %fprs
diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c
index 007f5317c0d..96da847023f 100644
--- a/arch/sparc64/kernel/traps.c
+++ b/arch/sparc64/kernel/traps.c
@@ -42,6 +42,7 @@
#endif
#include <asm/prom.h>
+#include "entry.h"
/* When an irrecoverable trap occurs at tl > 0, the trap entry
* code logs the trap state registers at every level in the trap
@@ -77,11 +78,6 @@ static void dump_tl1_traplog(struct tl1_traplog *p)
}
}
-void do_call_debug(struct pt_regs *regs)
-{
- notify_die(DIE_CALL, "debug call", regs, 0, 255, SIGINT);
-}
-
void bad_trap(struct pt_regs *regs, long lvl)
{
char buffer[32];
@@ -550,41 +546,6 @@ static unsigned long ecache_flush_physbase;
static unsigned long ecache_flush_linesize;
static unsigned long ecache_flush_size;
-/* WARNING: The error trap handlers in assembly know the precise
- * layout of the following structure.
- *
- * C-level handlers below use this information to log the error
- * and then determine how to recover (if possible).
- */
-struct cheetah_err_info {
-/*0x00*/u64 afsr;
-/*0x08*/u64 afar;
-
- /* D-cache state */
-/*0x10*/u64 dcache_data[4]; /* The actual data */
-/*0x30*/u64 dcache_index; /* D-cache index */
-/*0x38*/u64 dcache_tag; /* D-cache tag/valid */
-/*0x40*/u64 dcache_utag; /* D-cache microtag */
-/*0x48*/u64 dcache_stag; /* D-cache snooptag */
-
- /* I-cache state */
-/*0x50*/u64 icache_data[8]; /* The actual insns + predecode */
-/*0x90*/u64 icache_index; /* I-cache index */
-/*0x98*/u64 icache_tag; /* I-cache phys tag */
-/*0xa0*/u64 icache_utag; /* I-cache microtag */
-/*0xa8*/u64 icache_stag; /* I-cache snooptag */
-/*0xb0*/u64 icache_upper; /* I-cache upper-tag */
-/*0xb8*/u64 icache_lower; /* I-cache lower-tag */
-
- /* E-cache state */
-/*0xc0*/u64 ecache_data[4]; /* 32 bytes from staging registers */
-/*0xe0*/u64 ecache_index; /* E-cache index */
-/*0xe8*/u64 ecache_tag; /* E-cache tag/state */
-
-/*0xf0*/u64 __pad[32 - 30];
-};
-#define CHAFSR_INVALID ((u64)-1L)
-
/* This table is ordered in priority of errors and matches the
* AFAR overwrite policy as well.
*/
@@ -758,10 +719,6 @@ static struct afsr_error_table __jalapeno_error_table[] = {
static struct afsr_error_table *cheetah_error_table;
static unsigned long cheetah_afsr_errors;
-/* This is allocated at boot time based upon the largest hardware
- * cpu ID in the system. We allocate two entries per cpu, one for
- * TL==0 logging and one for TL >= 1 logging.
- */
struct cheetah_err_info *cheetah_error_log;
static inline struct cheetah_err_info *cheetah_get_error_log(unsigned long afsr)
@@ -2102,7 +2059,7 @@ void do_div0(struct pt_regs *regs)
force_sig_info(SIGFPE, &info, current);
}
-void instruction_dump (unsigned int *pc)
+static void instruction_dump(unsigned int *pc)
{
int i;
@@ -2115,7 +2072,7 @@ void instruction_dump (unsigned int *pc)
printk("\n");
}
-static void user_instruction_dump (unsigned int __user *pc)
+static void user_instruction_dump(unsigned int __user *pc)
{
int i;
unsigned int buf[9];
diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c
index b5c30416fda..f37078d9640 100644
--- a/arch/sparc64/mm/init.c
+++ b/arch/sparc64/mm/init.c
@@ -46,6 +46,7 @@
#include <asm/prom.h>
#include <asm/sstate.h>
#include <asm/mdesc.h>
+#include <asm/cpudata.h>
#define MAX_PHYS_ADDRESS (1UL << 42UL)
#define KPTE_BITMAP_CHUNK_SZ (256UL * 1024UL * 1024UL)
@@ -166,7 +167,7 @@ unsigned long sparc64_kern_pri_context __read_mostly;
unsigned long sparc64_kern_pri_nuc_bits __read_mostly;
unsigned long sparc64_kern_sec_context __read_mostly;
-int bigkernel = 0;
+int num_kernel_image_mappings;
#ifdef CONFIG_DEBUG_DCFLUSH
atomic_t dcpage_flushes = ATOMIC_INIT(0);
@@ -572,7 +573,7 @@ static unsigned long kern_large_tte(unsigned long paddr);
static void __init remap_kernel(void)
{
unsigned long phys_page, tte_vaddr, tte_data;
- int tlb_ent = sparc64_highest_locked_tlbent();
+ int i, tlb_ent = sparc64_highest_locked_tlbent();
tte_vaddr = (unsigned long) KERNBASE;
phys_page = (prom_boot_mapping_phys_low >> 22UL) << 22UL;
@@ -582,27 +583,20 @@ static void __init remap_kernel(void)
/* Now lock us into the TLBs via Hypervisor or OBP. */
if (tlb_type == hypervisor) {
- hypervisor_tlb_lock(tte_vaddr, tte_data, HV_MMU_DMMU);
- hypervisor_tlb_lock(tte_vaddr, tte_data, HV_MMU_IMMU);
- if (bigkernel) {
- tte_vaddr += 0x400000;
- tte_data += 0x400000;
+ for (i = 0; i < num_kernel_image_mappings; i++) {
hypervisor_tlb_lock(tte_vaddr, tte_data, HV_MMU_DMMU);
hypervisor_tlb_lock(tte_vaddr, tte_data, HV_MMU_IMMU);
+ tte_vaddr += 0x400000;
+ tte_data += 0x400000;
}
} else {
- prom_dtlb_load(tlb_ent, tte_data, tte_vaddr);
- prom_itlb_load(tlb_ent, tte_data, tte_vaddr);
- if (bigkernel) {
- tlb_ent -= 1;
- prom_dtlb_load(tlb_ent,
- tte_data + 0x400000,
- tte_vaddr + 0x400000);
- prom_itlb_load(tlb_ent,
- tte_data + 0x400000,
- tte_vaddr + 0x400000);
+ for (i = 0; i < num_kernel_image_mappings; i++) {
+ prom_dtlb_load(tlb_ent - i, tte_data, tte_vaddr);
+ prom_itlb_load(tlb_ent - i, tte_data, tte_vaddr);
+ tte_vaddr += 0x400000;
+ tte_data += 0x400000;
}
- sparc64_highest_unlocked_tlb_ent = tlb_ent - 1;
+ sparc64_highest_unlocked_tlb_ent = tlb_ent - i;
}
if (tlb_type == cheetah_plus) {
sparc64_kern_pri_context = (CTX_CHEETAH_PLUS_CTX0 |
@@ -1280,10 +1274,6 @@ void __cpuinit sun4v_ktsb_register(void)
/* paging_init() sets up the page tables */
-extern void cheetah_ecache_flush_init(void);
-extern void sun4v_patch_tlb_handlers(void);
-
-extern void cpu_probe(void);
extern void central_probe(void);
static unsigned long last_valid_pfn;
@@ -1352,12 +1342,9 @@ void __init paging_init(void)
shift = kern_base + PAGE_OFFSET - ((unsigned long)KERNBASE);
real_end = (unsigned long)_end;
- if ((real_end > ((unsigned long)KERNBASE + 0x400000)))
- bigkernel = 1;
- if ((real_end > ((unsigned long)KERNBASE + 0x800000))) {
- prom_printf("paging_init: Kernel > 8MB, too large.\n");
- prom_halt();
- }
+ num_kernel_image_mappings = DIV_ROUND_UP(real_end - KERNBASE, 1 << 22);
+ printk("Kernel: Using %d locked TLB entries for main kernel image.\n",
+ num_kernel_image_mappings);
/* Set kernel pgd to upper alias so physical page computations
* work.
diff --git a/arch/sparc64/mm/tlb.c b/arch/sparc64/mm/tlb.c
index 3f10fc921b0..ae24919cba7 100644
--- a/arch/sparc64/mm/tlb.c
+++ b/arch/sparc64/mm/tlb.c
@@ -23,9 +23,7 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers) = { 0, };
void flush_tlb_pending(void)
{
- struct mmu_gather *mp = &__get_cpu_var(mmu_gathers);
-
- preempt_disable();
+ struct mmu_gather *mp = &get_cpu_var(mmu_gathers);
if (mp->tlb_nr) {
flush_tsb_user(mp);
@@ -42,7 +40,7 @@ void flush_tlb_pending(void)
mp->tlb_nr = 0;
}
- preempt_enable();
+ put_cpu_var(mmu_gathers);
}
void tlb_batch_add(struct mm_struct *mm, unsigned long vaddr, pte_t *ptep, pte_t orig)
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index 608152a2a05..00df126169b 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -18,6 +18,7 @@
#include <linux/pci.h>
#include <linux/bitops.h>
#include <linux/ioport.h>
+#include <linux/suspend.h>
#include <asm/e820.h>
#include <asm/io.h>
#include <asm/gart.h>
@@ -76,6 +77,8 @@ static u32 __init allocate_aperture(void)
printk(KERN_INFO "Mapping aperture over %d KB of RAM @ %lx\n",
aper_size >> 10, __pa(p));
insert_aperture_resource((u32)__pa(p), aper_size);
+ register_nosave_region((u32)__pa(p) >> PAGE_SHIFT,
+ (u32)__pa(p+aper_size) >> PAGE_SHIFT);
return (u32)__pa(p);
}
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
index f2b5a621d27..8a85c93bd62 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
@@ -63,7 +63,7 @@ static struct cpufreq_frequency_table speedstep_freqs[] = {
*/
static int speedstep_smi_ownership (void)
{
- u32 command, result, magic;
+ u32 command, result, magic, dummy;
u32 function = GET_SPEEDSTEP_OWNER;
unsigned char magic_data[] = "Copyright (c) 1999 Intel Corporation";
@@ -73,8 +73,11 @@ static int speedstep_smi_ownership (void)
dprintk("trying to obtain ownership with command %x at port %x\n", command, smi_port);
__asm__ __volatile__(
+ "push %%ebp\n"
"out %%al, (%%dx)\n"
- : "=D" (result)
+ "pop %%ebp\n"
+ : "=D" (result), "=a" (dummy), "=b" (dummy), "=c" (dummy), "=d" (dummy),
+ "=S" (dummy)
: "a" (command), "b" (function), "c" (0), "d" (smi_port),
"D" (0), "S" (magic)
: "memory"
@@ -96,7 +99,7 @@ static int speedstep_smi_ownership (void)
*/
static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high)
{
- u32 command, result = 0, edi, high_mhz, low_mhz;
+ u32 command, result = 0, edi, high_mhz, low_mhz, dummy;
u32 state=0;
u32 function = GET_SPEEDSTEP_FREQS;
@@ -109,10 +112,12 @@ static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high)
dprintk("trying to determine frequencies with command %x at port %x\n", command, smi_port);
- __asm__ __volatile__("movl $0, %%edi\n"
+ __asm__ __volatile__(
+ "push %%ebp\n"
"out %%al, (%%dx)\n"
- : "=a" (result), "=b" (high_mhz), "=c" (low_mhz), "=d" (state), "=D" (edi)
- : "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0)
+ "pop %%ebp"
+ : "=a" (result), "=b" (high_mhz), "=c" (low_mhz), "=d" (state), "=D" (edi), "=S" (dummy)
+ : "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0), "D" (0)
);
dprintk("result %x, low_freq %u, high_freq %u\n", result, low_mhz, high_mhz);
@@ -135,16 +140,18 @@ static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high)
static int speedstep_get_state (void)
{
u32 function=GET_SPEEDSTEP_STATE;
- u32 result, state, edi, command;
+ u32 result, state, edi, command, dummy;
command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
dprintk("trying to determine current setting with command %x at port %x\n", command, smi_port);
- __asm__ __volatile__("movl $0, %%edi\n"
+ __asm__ __volatile__(
+ "push %%ebp\n"
"out %%al, (%%dx)\n"
- : "=a" (result), "=b" (state), "=D" (edi)
- : "a" (command), "b" (function), "c" (0), "d" (smi_port), "S" (0)
+ "pop %%ebp\n"
+ : "=a" (result), "=b" (state), "=D" (edi), "=c" (dummy), "=d" (dummy), "=S" (dummy)
+ : "a" (command), "b" (function), "c" (0), "d" (smi_port), "S" (0), "D" (0)
);
dprintk("state is %x, result is %x\n", state, result);
@@ -160,7 +167,7 @@ static int speedstep_get_state (void)
*/
static void speedstep_set_state (unsigned int state)
{
- unsigned int result = 0, command, new_state;
+ unsigned int result = 0, command, new_state, dummy;
unsigned long flags;
unsigned int function=SET_SPEEDSTEP_STATE;
unsigned int retry = 0;
@@ -182,10 +189,12 @@ static void speedstep_set_state (unsigned int state)
}
retry++;
__asm__ __volatile__(
- "movl $0, %%edi\n"
+ "push %%ebp\n"
"out %%al, (%%dx)\n"
- : "=b" (new_state), "=D" (result)
- : "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0)
+ "pop %%ebp"
+ : "=b" (new_state), "=D" (result), "=c" (dummy), "=a" (dummy),
+ "=d" (dummy), "=S" (dummy)
+ : "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0), "D" (0)
);
} while ((new_state != state) && (retry <= SMI_TRIES));
@@ -195,7 +204,7 @@ static void speedstep_set_state (unsigned int state)
if (new_state == state) {
dprintk("change to %u MHz succeeded after %u tries with result %u\n", (speedstep_freqs[new_state].frequency / 1000), retry, result);
} else {
- printk(KERN_ERR "cpufreq: change failed with new_state %u and result %u\n", new_state, result);
+ printk(KERN_ERR "cpufreq: change to state %u failed with new_state %u and result %u\n", state, new_state, result);
}
return;
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index 103d61a59b1..3e18db4cefe 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -176,12 +176,13 @@ static inline void k8_enable_fixed_iorrs(void)
}
/**
- * Checks and updates an fixed-range MTRR if it differs from the value it
- * should have. If K8 extentions are wanted, update the K8 SYSCFG MSR also.
- * see AMD publication no. 24593, chapter 7.8.1, page 233 for more information
- * \param msr MSR address of the MTTR which should be checked and updated
- * \param changed pointer which indicates whether the MTRR needed to be changed
- * \param msrwords pointer to the MSR values which the MSR should have
+ * set_fixed_range - checks & updates a fixed-range MTRR if it differs from the value it should have
+ * @msr: MSR address of the MTTR which should be checked and updated
+ * @changed: pointer which indicates whether the MTRR needed to be changed
+ * @msrwords: pointer to the MSR values which the MSR should have
+ *
+ * If K8 extentions are wanted, update the K8 SYSCFG MSR also.
+ * See AMD publication no. 24593, chapter 7.8.1, page 233 for more information.
*/
static void set_fixed_range(int msr, bool *changed, unsigned int *msrwords)
{
@@ -199,12 +200,15 @@ static void set_fixed_range(int msr, bool *changed, unsigned int *msrwords)
}
}
+/**
+ * generic_get_free_region - Get a free MTRR.
+ * @base: The starting (base) address of the region.
+ * @size: The size (in bytes) of the region.
+ * @replace_reg: mtrr index to be replaced; set to invalid value if none.
+ *
+ * Returns: The index of the region on success, else negative on error.
+ */
int generic_get_free_region(unsigned long base, unsigned long size, int replace_reg)
-/* [SUMMARY] Get a free MTRR.
- <base> The starting (base) address of the region.
- <size> The size (in bytes) of the region.
- [RETURNS] The index of the region on success, else -1 on error.
-*/
{
int i, max;
mtrr_type ltype;
@@ -249,8 +253,8 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base,
}
/**
- * Checks and updates the fixed-range MTRRs if they differ from the saved set
- * \param frs pointer to fixed-range MTRR values, saved by get_fixed_ranges()
+ * set_fixed_ranges - checks & updates the fixed-range MTRRs if they differ from the saved set
+ * @frs: pointer to fixed-range MTRR values, saved by get_fixed_ranges()
*/
static int set_fixed_ranges(mtrr_type * frs)
{
@@ -294,13 +298,13 @@ static bool set_mtrr_var_ranges(unsigned int index, struct mtrr_var_range *vr)
static u32 deftype_lo, deftype_hi;
+/**
+ * set_mtrr_state - Set the MTRR state for this CPU.
+ *
+ * NOTE: The CPU must already be in a safe state for MTRR changes.
+ * RETURNS: 0 if no changes made, else a mask indicating what was changed.
+ */
static unsigned long set_mtrr_state(void)
-/* [SUMMARY] Set the MTRR state for this CPU.
- <state> The MTRR state information to read.
- <ctxt> Some relevant CPU context.
- [NOTE] The CPU must already be in a safe state for MTRR changes.
- [RETURNS] 0 if no changes made, else a mask indication what was changed.
-*/
{
unsigned int i;
unsigned long change_mask = 0;
diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index be83336fddb..a6450b3ae75 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -711,7 +711,8 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
trim_size = end_pfn;
trim_size <<= PAGE_SHIFT;
trim_size -= trim_start;
- add_memory_region(trim_start, trim_size, E820_RESERVED);
+ update_memory_range(trim_start, trim_size, E820_RAM,
+ E820_RESERVED);
update_e820();
return 1;
}
diff --git a/arch/x86/kernel/e820_32.c b/arch/x86/kernel/e820_32.c
index 4e16ef4a265..80444c5c9b1 100644
--- a/arch/x86/kernel/e820_32.c
+++ b/arch/x86/kernel/e820_32.c
@@ -749,6 +749,32 @@ static int __init parse_memmap(char *arg)
return 0;
}
early_param("memmap", parse_memmap);
+void __init update_memory_range(u64 start, u64 size, unsigned old_type,
+ unsigned new_type)
+{
+ int i;
+
+ BUG_ON(old_type == new_type);
+
+ for (i = 0; i < e820.nr_map; i++) {
+ struct e820entry *ei = &e820.map[i];
+ u64 final_start, final_end;
+ if (ei->type != old_type)
+ continue;
+ /* totally covered? */
+ if (ei->addr >= start && ei->size <= size) {
+ ei->type = new_type;
+ continue;
+ }
+ /* partially covered */
+ final_start = max(start, ei->addr);
+ final_end = min(start + size, ei->addr + ei->size);
+ if (final_start >= final_end)
+ continue;
+ add_memory_region(final_start, final_end - final_start,
+ new_type);
+ }
+}
void __init update_e820(void)
{
u8 nr_map;
diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c
index 9f65b4cc323..9be69712601 100644
--- a/arch/x86/kernel/e820_64.c
+++ b/arch/x86/kernel/e820_64.c
@@ -744,6 +744,33 @@ void __init finish_e820_parsing(void)
}
}
+void __init update_memory_range(u64 start, u64 size, unsigned old_type,
+ unsigned new_type)
+{
+ int i;
+
+ BUG_ON(old_type == new_type);
+
+ for (i = 0; i < e820.nr_map; i++) {
+ struct e820entry *ei = &e820.map[i];
+ u64 final_start, final_end;
+ if (ei->type != old_type)
+ continue;
+ /* totally covered? */
+ if (ei->addr >= start && ei->size <= size) {
+ ei->type = new_type;
+ continue;
+ }
+ /* partially covered */
+ final_start = max(start, ei->addr);
+ final_end = min(start + size, ei->addr + ei->size);
+ if (final_start >= final_end)
+ continue;
+ add_memory_region(final_start, final_end - final_start,
+ new_type);
+ }
+}
+
void __init update_e820(void)
{
u8 nr_map;
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index fd8ca53943a..74d87ea85b5 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -657,7 +657,7 @@ int_msg:
.asciz "Unknown interrupt or fault at EIP %p %p %p\n"
fault_msg:
- .ascii \
+ .asciz \
/* fault info: */ "BUG: Int %d: CR2 %p\n" \
/* pusha regs: */ " EDI %p ESI %p EBP %p ESP %p\n" \
" EBX %p EDX %p ECX %p EAX %p\n" \
diff --git a/arch/x86/kernel/io_delay.c b/arch/x86/kernel/io_delay.c
index c706a306155..5921e5f0a64 100644
--- a/arch/x86/kernel/io_delay.c
+++ b/arch/x86/kernel/io_delay.c
@@ -78,6 +78,14 @@ static struct dmi_system_id __initdata io_delay_0xed_port_dmi_table[] = {
},
{
.callback = dmi_io_delay_0xed_port,
+ .ident = "HP Pavilion dv6000",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Quanta"),
+ DMI_MATCH(DMI_BOARD_NAME, "30B8")
+ }
+ },
+ {
+ .callback = dmi_io_delay_0xed_port,
.ident = "HP Pavilion tx1000",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Quanta"),
diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
index 236d2f8f7dd..576a03db451 100644
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -233,6 +233,7 @@ NORET_TYPE void machine_kexec(struct kimage *image)
void arch_crash_save_vmcoreinfo(void)
{
+ VMCOREINFO_SYMBOL(phys_base);
VMCOREINFO_SYMBOL(init_level4_pgt);
#ifdef CONFIG_NUMA
diff --git a/arch/x86/kernel/mfgpt_32.c b/arch/x86/kernel/mfgpt_32.c
index 027fc067b39..b402c0f3f19 100644
--- a/arch/x86/kernel/mfgpt_32.c
+++ b/arch/x86/kernel/mfgpt_32.c
@@ -30,6 +30,7 @@
#include <linux/kernel.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <asm/geode.h>
static struct mfgpt_timer_t {
diff --git a/arch/x86/kernel/pci-dma_64.c b/arch/x86/kernel/pci-dma_64.c
index a82473d192a..375cb2bc45b 100644
--- a/arch/x86/kernel/pci-dma_64.c
+++ b/arch/x86/kernel/pci-dma_64.c
@@ -53,11 +53,6 @@ dma_alloc_pages(struct device *dev, gfp_t gfp, unsigned order)
int node;
node = dev_to_node(dev);
- if (node == -1)
- node = numa_node_id();
-
- if (node < first_node(node_online_map))
- node = first_node(node_online_map);
page = alloc_pages_node(node, gfp, order);
return page ? page_address(page) : NULL;
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index d5904eef1d3..eb92ccbb350 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -600,21 +600,6 @@ static int ptrace_bts_read_record(struct task_struct *child,
return sizeof(ret);
}
-static int ptrace_bts_write_record(struct task_struct *child,
- const struct bts_struct *in)
-{
- int retval;
-
- if (!child->thread.ds_area_msr)
- return -ENXIO;
-
- retval = ds_write_bts((void *)child->thread.ds_area_msr, in);
- if (retval)
- return retval;
-
- return sizeof(*in);
-}
-
static int ptrace_bts_clear(struct task_struct *child)
{
if (!child->thread.ds_area_msr)
@@ -657,75 +642,6 @@ static int ptrace_bts_drain(struct task_struct *child,
return end;
}
-static int ptrace_bts_realloc(struct task_struct *child,
- int size, int reduce_size)
-{
- unsigned long rlim, vm;
- int ret, old_size;
-
- if (size < 0)
- return -EINVAL;
-
- old_size = ds_get_bts_size((void *)child->thread.ds_area_msr);
- if (old_size < 0)
- return old_size;
-
- ret = ds_free((void **)&child->thread.ds_area_msr);
- if (ret < 0)
- goto out;
-
- size >>= PAGE_SHIFT;
- old_size >>= PAGE_SHIFT;
-
- current->mm->total_vm -= old_size;
- current->mm->locked_vm -= old_size;
-
- if (size == 0)
- goto out;
-
- rlim = current->signal->rlim[RLIMIT_AS].rlim_cur >> PAGE_SHIFT;
- vm = current->mm->total_vm + size;
- if (rlim < vm) {
- ret = -ENOMEM;
-
- if (!reduce_size)
- goto out;
-
- size = rlim - current->mm->total_vm;
- if (size <= 0)
- goto out;
- }
-
- rlim = current->signal->rlim[RLIMIT_MEMLOCK].rlim_cur >> PAGE_SHIFT;
- vm = current->mm->locked_vm + size;
- if (rlim < vm) {
- ret = -ENOMEM;
-
- if (!reduce_size)
- goto out;
-
- size = rlim - current->mm->locked_vm;
- if (size <= 0)
- goto out;
- }
-
- ret = ds_allocate((void **)&child->thread.ds_area_msr,
- size << PAGE_SHIFT);
- if (ret < 0)
- goto out;
-
- current->mm->total_vm += size;
- current->mm->locked_vm += size;
-
-out:
- if (child->thread.ds_area_msr)
- set_tsk_thread_flag(child, TIF_DS_AREA_MSR);
- else
- clear_tsk_thread_flag(child, TIF_DS_AREA_MSR);
-
- return ret;
-}
-
static int ptrace_bts_config(struct task_struct *child,
long cfg_size,
const struct ptrace_bts_config __user *ucfg)
@@ -828,6 +744,91 @@ static int ptrace_bts_status(struct task_struct *child,
return sizeof(cfg);
}
+
+static int ptrace_bts_write_record(struct task_struct *child,
+ const struct bts_struct *in)
+{
+ int retval;
+
+ if (!child->thread.ds_area_msr)
+ return -ENXIO;
+
+ retval = ds_write_bts((void *)child->thread.ds_area_msr, in);
+ if (retval)
+ return retval;
+
+ return sizeof(*in);
+}
+
+static int ptrace_bts_realloc(struct task_struct *child,
+ int size, int reduce_size)
+{
+ unsigned long rlim, vm;
+ int ret, old_size;
+
+ if (size < 0)
+ return -EINVAL;
+
+ old_size = ds_get_bts_size((void *)child->thread.ds_area_msr);
+ if (old_size < 0)
+ return old_size;
+
+ ret = ds_free((void **)&child->thread.ds_area_msr);
+ if (ret < 0)
+ goto out;
+
+ size >>= PAGE_SHIFT;
+ old_size >>= PAGE_SHIFT;
+
+ current->mm->total_vm -= old_size;
+ current->mm->locked_vm -= old_size;
+
+ if (size == 0)
+ goto out;
+
+ rlim = current->signal->rlim[RLIMIT_AS].rlim_cur >> PAGE_SHIFT;
+ vm = current->mm->total_vm + size;
+ if (rlim < vm) {
+ ret = -ENOMEM;
+
+ if (!reduce_size)
+ goto out;
+
+ size = rlim - current->mm->total_vm;
+ if (size <= 0)
+ goto out;
+ }
+
+ rlim = current->signal->rlim[RLIMIT_MEMLOCK].rlim_cur >> PAGE_SHIFT;
+ vm = current->mm->locked_vm + size;
+ if (rlim < vm) {
+ ret = -ENOMEM;
+
+ if (!reduce_size)
+ goto out;
+
+ size = rlim - current->mm->locked_vm;
+ if (size <= 0)
+ goto out;
+ }
+
+ ret = ds_allocate((void **)&child->thread.ds_area_msr,
+ size << PAGE_SHIFT);
+ if (ret < 0)
+ goto out;
+
+ current->mm->total_vm += size;
+ current->mm->locked_vm += size;
+
+out:
+ if (child->thread.ds_area_msr)
+ set_tsk_thread_flag(child, TIF_DS_AREA_MSR);
+ else
+ clear_tsk_thread_flag(child, TIF_DS_AREA_MSR);
+
+ return ret;
+}
+
void ptrace_bts_take_timestamp(struct task_struct *tsk,
enum bts_qualifier qualifier)
{
diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c
index c47208fc593..d89a648fe71 100644
--- a/arch/x86/kernel/quirks.c
+++ b/arch/x86/kernel/quirks.c
@@ -363,6 +363,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0051,
nvidia_force_enable_hpet);
/* LPC bridges */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0260,
+ nvidia_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0360,
nvidia_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0361,
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 55ceb8cdef7..484c4a80d38 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -152,6 +152,24 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
DMI_MATCH(DMI_BOARD_NAME, "0WF810"),
},
},
+ { /* Handle problems with rebooting on Dell Optiplex 745's DFF*/
+ .callback = set_bios_reboot,
+ .ident = "Dell OptiPlex 745",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 745"),
+ DMI_MATCH(DMI_BOARD_NAME, "0MM599"),
+ },
+ },
+ { /* Handle problems with rebooting on Dell Optiplex 745 with 0KW626 */
+ .callback = set_bios_reboot,
+ .ident = "Dell OptiPlex 745",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 745"),
+ DMI_MATCH(DMI_BOARD_NAME, "0KW626"),
+ },
+ },
{ /* Handle problems with rebooting on Dell 2400's */
.callback = set_bios_reboot,
.ident = "Dell PowerEdge 2400",
diff --git a/arch/x86/kernel/setup64.c b/arch/x86/kernel/setup64.c
index 309366f8f60..e24c4567709 100644
--- a/arch/x86/kernel/setup64.c
+++ b/arch/x86/kernel/setup64.c
@@ -142,14 +142,16 @@ void __init setup_per_cpu_areas(void)
printk(KERN_INFO "PERCPU: Allocating %lu bytes of per cpu data\n", size);
for_each_cpu_mask (i, cpu_possible_map) {
char *ptr;
+#ifndef CONFIG_NEED_MULTIPLE_NODES
+ ptr = alloc_bootmem_pages(size);
+#else
+ int node = early_cpu_to_node(i);
- if (!NODE_DATA(early_cpu_to_node(i))) {
- printk("cpu with no node %d, num_online_nodes %d\n",
- i, num_online_nodes());
+ if (!node_online(node) || !NODE_DATA(node))
ptr = alloc_bootmem_pages(size);
- } else {
- ptr = alloc_bootmem_pages_node(NODE_DATA(early_cpu_to_node(i)), size);
- }
+ else
+ ptr = alloc_bootmem_pages_node(NODE_DATA(node), size);
+#endif
if (!ptr)
panic("Cannot allocate cpu data for CPU %d\n", i);
cpu_pda(i)->data_offset = ptr - __per_cpu_start;
diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c
index a1d7071a51c..2b3e5d45176 100644
--- a/arch/x86/kernel/setup_32.c
+++ b/arch/x86/kernel/setup_32.c
@@ -406,8 +406,6 @@ static unsigned long __init setup_memory(void)
*/
min_low_pfn = PFN_UP(init_pg_tables_end);
- find_max_pfn();
-
max_low_pfn = find_max_low_pfn();
#ifdef CONFIG_HIGHMEM
@@ -764,12 +762,13 @@ void __init setup_arch(char **cmdline_p)
if (efi_enabled)
efi_init();
- max_low_pfn = setup_memory();
-
/* update e820 for memory not covered by WB MTRRs */
+ find_max_pfn();
mtrr_bp_init();
if (mtrr_trim_uncached_memory(max_pfn))
- max_low_pfn = setup_memory();
+ find_max_pfn();
+
+ max_low_pfn = setup_memory();
#ifdef CONFIG_VMI
/*
diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c
index 7637dc91c79..f4f7ecfb898 100644
--- a/arch/x86/kernel/setup_64.c
+++ b/arch/x86/kernel/setup_64.c
@@ -801,7 +801,7 @@ static void __cpuinit srat_detect_node(void)
/* Don't do the funky fallback heuristics the AMD version employs
for now. */
node = apicid_to_node[apicid];
- if (node == NUMA_NO_NODE)
+ if (node == NUMA_NO_NODE || !node_online(node))
node = first_node(node_online_map);
numa_set_node(cpu, node);
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index d8172aabc66..e55af12e11b 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -222,8 +222,7 @@ static int is_io_pte(unsigned long pte)
static int is_rmap_pte(u64 pte)
{
- return pte != shadow_trap_nonpresent_pte
- && pte != shadow_notrap_nonpresent_pte;
+ return is_shadow_present_pte(pte);
}
static gfn_t pse36_gfn_delta(u32 gpte)
@@ -893,14 +892,25 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
int *ptwrite, gfn_t gfn, struct page *page)
{
u64 spte;
- int was_rmapped = is_rmap_pte(*shadow_pte);
+ int was_rmapped = 0;
int was_writeble = is_writeble_pte(*shadow_pte);
+ hfn_t host_pfn = (*shadow_pte & PT64_BASE_ADDR_MASK) >> PAGE_SHIFT;
pgprintk("%s: spte %llx access %x write_fault %d"
" user_fault %d gfn %lx\n",
__FUNCTION__, *shadow_pte, pt_access,
write_fault, user_fault, gfn);
+ if (is_rmap_pte(*shadow_pte)) {
+ if (host_pfn != page_to_pfn(page)) {
+ pgprintk("hfn old %lx new %lx\n",
+ host_pfn, page_to_pfn(page));
+ rmap_remove(vcpu->kvm, shadow_pte);
+ }
+ else
+ was_rmapped = 1;
+ }
+
/*
* We don't set the accessed bit, since we sometimes want to see
* whether the guest actually used the pte (in order to detect
@@ -1402,7 +1412,7 @@ static void mmu_guess_page_from_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
up_read(&current->mm->mmap_sem);
vcpu->arch.update_pte.gfn = gfn;
- vcpu->arch.update_pte.page = gfn_to_page(vcpu->kvm, gfn);
+ vcpu->arch.update_pte.page = page;
}
void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 94ea724638f..8e1462880d1 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -349,8 +349,6 @@ static void update_exception_bitmap(struct kvm_vcpu *vcpu)
static void reload_tss(void)
{
-#ifndef CONFIG_X86_64
-
/*
* VT restores TR but not its size. Useless.
*/
@@ -361,7 +359,6 @@ static void reload_tss(void)
descs = (void *)gdt.base;
descs[GDT_ENTRY_TSS].type = 9; /* available TSS */
load_TR_desc();
-#endif
}
static void load_transition_efer(struct vcpu_vmx *vmx)
@@ -1436,7 +1433,7 @@ static int init_rmode_tss(struct kvm *kvm)
int ret = 0;
int r;
- down_read(&current->mm->mmap_sem);
+ down_read(&kvm->slots_lock);
r = kvm_clear_guest_page(kvm, fn, 0, PAGE_SIZE);
if (r < 0)
goto out;
@@ -1459,7 +1456,7 @@ static int init_rmode_tss(struct kvm *kvm)
ret = 1;
out:
- up_read(&current->mm->mmap_sem);
+ up_read(&kvm->slots_lock);
return ret;
}
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index a104c532ff7..3335b4595ef 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -10,21 +10,19 @@
* (such as the example in Documentation/lguest/lguest.c) is called the
* Launcher.
*
- * Secondly, we only run specially modified Guests, not normal kernels. When
- * you set CONFIG_LGUEST to 'y' or 'm', this automatically sets
- * CONFIG_LGUEST_GUEST=y, which compiles this file into the kernel so it knows
- * how to be a Guest. This means that you can use the same kernel you boot
- * normally (ie. as a Host) as a Guest.
+ * Secondly, we only run specially modified Guests, not normal kernels: setting
+ * CONFIG_LGUEST_GUEST to "y" compiles this file into the kernel so it knows
+ * how to be a Guest at boot time. This means that you can use the same kernel
+ * you boot normally (ie. as a Host) as a Guest.
*
* These Guests know that they cannot do privileged operations, such as disable
* interrupts, and that they have to ask the Host to do such things explicitly.
* This file consists of all the replacements for such low-level native
* hardware operations: these special Guest versions call the Host.
*
- * So how does the kernel know it's a Guest? The Guest starts at a special
- * entry point marked with a magic string, which sets up a few things then
- * calls here. We replace the native functions various "paravirt" structures
- * with our Guest versions, then boot like normal. :*/
+ * So how does the kernel know it's a Guest? We'll see that later, but let's
+ * just say that we end up here where we replace the native functions various
+ * "paravirt" structures with our Guest versions, then boot like normal. :*/
/*
* Copyright (C) 2006, Rusty Russell <rusty@rustcorp.com.au> IBM Corporation.
@@ -134,7 +132,7 @@ static void async_hcall(unsigned long call, unsigned long arg1,
* lguest_leave_lazy_mode().
*
* So, when we're in lazy mode, we call async_hcall() to store the call for
- * future processing. */
+ * future processing: */
static void lazy_hcall(unsigned long call,
unsigned long arg1,
unsigned long arg2,
@@ -147,7 +145,7 @@ static void lazy_hcall(unsigned long call,
}
/* When lazy mode is turned off reset the per-cpu lazy mode variable and then
- * issue a hypercall to flush any stored calls. */
+ * issue the do-nothing hypercall to flush any stored calls. */
static void lguest_leave_lazy_mode(void)
{
paravirt_leave_lazy(paravirt_get_lazy_mode());
@@ -164,7 +162,7 @@ static void lguest_leave_lazy_mode(void)
*
* So instead we keep an "irq_enabled" field inside our "struct lguest_data",
* which the Guest can update with a single instruction. The Host knows to
- * check there when it wants to deliver an interrupt.
+ * check there before it tries to deliver an interrupt.
*/
/* save_flags() is expected to return the processor state (ie. "flags"). The
@@ -196,10 +194,15 @@ static void irq_enable(void)
/*M:003 Note that we don't check for outstanding interrupts when we re-enable
* them (or when we unmask an interrupt). This seems to work for the moment,
* since interrupts are rare and we'll just get the interrupt on the next timer
- * tick, but when we turn on CONFIG_NO_HZ, we should revisit this. One way
+ * tick, but now we can run with CONFIG_NO_HZ, we should revisit this. One way
* would be to put the "irq_enabled" field in a page by itself, and have the
* Host write-protect it when an interrupt comes in when irqs are disabled.
- * There will then be a page fault as soon as interrupts are re-enabled. :*/
+ * There will then be a page fault as soon as interrupts are re-enabled.
+ *
+ * A better method is to implement soft interrupt disable generally for x86:
+ * instead of disabling interrupts, we set a flag. If an interrupt does come
+ * in, we then disable them for real. This is uncommon, so we could simply use
+ * a hypercall for interrupt control and not worry about efficiency. :*/
/*G:034
* The Interrupt Descriptor Table (IDT).
@@ -212,6 +215,10 @@ static void irq_enable(void)
static void lguest_write_idt_entry(gate_desc *dt,
int entrynum, const gate_desc *g)
{
+ /* The gate_desc structure is 8 bytes long: we hand it to the Host in
+ * two 32-bit chunks. The whole 32-bit kernel used to hand descriptors
+ * around like this; typesafety wasn't a big concern in Linux's early
+ * years. */
u32 *desc = (u32 *)g;
/* Keep the local copy up to date. */
native_write_idt_entry(dt, entrynum, g);
@@ -243,7 +250,8 @@ static void lguest_load_idt(const struct desc_ptr *desc)
*
* This is the opposite of the IDT code where we have a LOAD_IDT_ENTRY
* hypercall and use that repeatedly to load a new IDT. I don't think it
- * really matters, but wouldn't it be nice if they were the same?
+ * really matters, but wouldn't it be nice if they were the same? Wouldn't
+ * it be even better if you were the one to send the patch to fix it?
*/
static void lguest_load_gdt(const struct desc_ptr *desc)
{
@@ -298,9 +306,9 @@ static void lguest_load_tr_desc(void)
/* The "cpuid" instruction is a way of querying both the CPU identity
* (manufacturer, model, etc) and its features. It was introduced before the
- * Pentium in 1993 and keeps getting extended by both Intel and AMD. As you
- * might imagine, after a decade and a half this treatment, it is now a giant
- * ball of hair. Its entry in the current Intel manual runs to 28 pages.
+ * Pentium in 1993 and keeps getting extended by both Intel, AMD and others.
+ * As you might imagine, after a decade and a half this treatment, it is now a
+ * giant ball of hair. Its entry in the current Intel manual runs to 28 pages.
*
* This instruction even it has its own Wikipedia entry. The Wikipedia entry
* has been translated into 4 languages. I am not making this up!
@@ -594,17 +602,17 @@ static unsigned long lguest_get_wallclock(void)
return lguest_data.time.tv_sec;
}
-/* The TSC is a Time Stamp Counter. The Host tells us what speed it runs at,
- * or 0 if it's unusable as a reliable clock source. This matches what we want
- * here: if we return 0 from this function, the x86 TSC clock will not register
- * itself. */
+/* The TSC is an Intel thing called the Time Stamp Counter. The Host tells us
+ * what speed it runs at, or 0 if it's unusable as a reliable clock source.
+ * This matches what we want here: if we return 0 from this function, the x86
+ * TSC clock will give up and not register itself. */
static unsigned long lguest_cpu_khz(void)
{
return lguest_data.tsc_khz;
}
-/* If we can't use the TSC, the kernel falls back to our "lguest_clock", where
- * we read the time value given to us by the Host. */
+/* If we can't use the TSC, the kernel falls back to our lower-priority
+ * "lguest_clock", where we read the time value given to us by the Host. */
static cycle_t lguest_clock_read(void)
{
unsigned long sec, nsec;
@@ -648,12 +656,16 @@ static struct clocksource lguest_clock = {
static int lguest_clockevent_set_next_event(unsigned long delta,
struct clock_event_device *evt)
{
+ /* FIXME: I don't think this can ever happen, but James tells me he had
+ * to put this code in. Maybe we should remove it now. Anyone? */
if (delta < LG_CLOCK_MIN_DELTA) {
if (printk_ratelimit())
printk(KERN_DEBUG "%s: small delta %lu ns\n",
__FUNCTION__, delta);
return -ETIME;
}
+
+ /* Please wake us this far in the future. */
hcall(LHCALL_SET_CLOCKEVENT, delta, 0, 0);
return 0;
}
@@ -738,7 +750,7 @@ static void lguest_time_init(void)
* will not tolerate us trying to use that), the stack pointer, and the number
* of pages in the stack. */
static void lguest_load_sp0(struct tss_struct *tss,
- struct thread_struct *thread)
+ struct thread_struct *thread)
{
lazy_hcall(LHCALL_SET_STACK, __KERNEL_DS|0x1, thread->sp0,
THREAD_SIZE/PAGE_SIZE);
@@ -786,9 +798,8 @@ static void lguest_safe_halt(void)
hcall(LHCALL_HALT, 0, 0, 0);
}
-/* Perhaps CRASH isn't the best name for this hypercall, but we use it to get a
- * message out when we're crashing as well as elegant termination like powering
- * off.
+/* The SHUTDOWN hypercall takes a string to describe what's happening, and
+ * an argument which says whether this to restart (reboot) the Guest or not.
*
* Note that the Host always prefers that the Guest speak in physical addresses
* rather than virtual addresses, so we use __pa() here. */
@@ -816,8 +827,9 @@ static struct notifier_block paniced = {
/* Setting up memory is fairly easy. */
static __init char *lguest_memory_setup(void)
{
- /* We do this here and not earlier because lockcheck barfs if we do it
- * before start_kernel() */
+ /* We do this here and not earlier because lockcheck used to barf if we
+ * did it before start_kernel(). I think we fixed that, so it'd be
+ * nice to move it back to lguest_init. Patch welcome... */
atomic_notifier_chain_register(&panic_notifier_list, &paniced);
/* The Linux bootloader header contains an "e820" memory map: the
@@ -850,12 +862,19 @@ static __init int early_put_chars(u32 vtermno, const char *buf, int count)
return len;
}
+/* Rebooting also tells the Host we're finished, but the RESTART flag tells the
+ * Launcher to reboot us. */
+static void lguest_restart(char *reason)
+{
+ hcall(LHCALL_SHUTDOWN, __pa(reason), LGUEST_SHUTDOWN_RESTART, 0);
+}
+
/*G:050
* Patching (Powerfully Placating Performance Pedants)
*
- * We have already seen that pv_ops structures let us replace simple
- * native instructions with calls to the appropriate back end all throughout
- * the kernel. This allows the same kernel to run as a Guest and as a native
+ * We have already seen that pv_ops structures let us replace simple native
+ * instructions with calls to the appropriate back end all throughout the
+ * kernel. This allows the same kernel to run as a Guest and as a native
* kernel, but it's slow because of all the indirect branches.
*
* Remember that David Wheeler quote about "Any problem in computer science can
@@ -908,14 +927,9 @@ static unsigned lguest_patch(u8 type, u16 clobber, void *ibuf,
return insn_len;
}
-static void lguest_restart(char *reason)
-{
- hcall(LHCALL_SHUTDOWN, __pa(reason), LGUEST_SHUTDOWN_RESTART, 0);
-}
-
-/*G:030 Once we get to lguest_init(), we know we're a Guest. The pv_ops
- * structures in the kernel provide points for (almost) every routine we have
- * to override to avoid privileged instructions. */
+/*G:030 Once we get to lguest_init(), we know we're a Guest. The various
+ * pv_ops structures in the kernel provide points for (almost) every routine we
+ * have to override to avoid privileged instructions. */
__init void lguest_init(void)
{
/* We're under lguest, paravirt is enabled, and we're running at
@@ -1003,9 +1017,9 @@ __init void lguest_init(void)
* the normal data segment to get through booting. */
asm volatile ("mov %0, %%fs" : : "r" (__KERNEL_DS) : "memory");
- /* The Host uses the top of the Guest's virtual address space for the
- * Host<->Guest Switcher, and it tells us how big that is in
- * lguest_data.reserve_mem, set up on the LGUEST_INIT hypercall. */
+ /* The Host<->Guest Switcher lives at the top of our address space, and
+ * the Host told us how big it is when we made LGUEST_INIT hypercall:
+ * it put the answer in lguest_data.reserve_mem */
reserve_top_address(lguest_data.reserve_mem);
/* If we don't initialize the lock dependency checker now, it crashes
@@ -1027,6 +1041,7 @@ __init void lguest_init(void)
/* Math is always hard! */
new_cpu_data.hard_math = 1;
+ /* We don't have features. We have puppies! Puppies! */
#ifdef CONFIG_X86_MCE
mce_disabled = 1;
#endif
@@ -1044,10 +1059,11 @@ __init void lguest_init(void)
virtio_cons_early_init(early_put_chars);
/* Last of all, we set the power management poweroff hook to point to
- * the Guest routine to power off. */
+ * the Guest routine to power off, and the reboot hook to our restart
+ * routine. */
pm_power_off = lguest_power_off;
-
machine_ops.restart = lguest_restart;
+
/* Now we're set up, call start_kernel() in init/main.c and we proceed
* to boot as normal. It never returns. */
start_kernel();
diff --git a/arch/x86/lguest/i386_head.S b/arch/x86/lguest/i386_head.S
index 95b6fbcded6..5c7cef34c9e 100644
--- a/arch/x86/lguest/i386_head.S
+++ b/arch/x86/lguest/i386_head.S
@@ -5,13 +5,20 @@
#include <asm/thread_info.h>
#include <asm/processor-flags.h>
-/*G:020 This is where we begin: head.S notes that the boot header's platform
- * type field is "1" (lguest), so calls us here.
+/*G:020 Our story starts with the kernel booting into startup_32 in
+ * arch/x86/kernel/head_32.S. It expects a boot header, which is created by
+ * the bootloader (the Launcher in our case).
+ *
+ * The startup_32 function does very little: it clears the uninitialized global
+ * C variables which we expect to be zero (ie. BSS) and then copies the boot
+ * header and kernel command line somewhere safe. Finally it checks the
+ * 'hardware_subarch' field. This was introduced in 2.6.24 for lguest and Xen:
+ * if it's set to '1' (lguest's assigned number), then it calls us here.
*
* WARNING: be very careful here! We're running at addresses equal to physical
* addesses (around 0), not above PAGE_OFFSET as most code expectes
* (eg. 0xC0000000). Jumps are relative, so they're OK, but we can't touch any
- * data.
+ * data without remembering to subtract __PAGE_OFFSET!
*
* The .section line puts this code in .init.text so it will be discarded after
* boot. */
@@ -24,7 +31,7 @@ ENTRY(lguest_entry)
int $LGUEST_TRAP_ENTRY
/* The Host put the toplevel pagetable in lguest_data.pgdir. The movsl
- * instruction uses %esi implicitly as the source for the copy we'
+ * instruction uses %esi implicitly as the source for the copy we're
* about to do. */
movl lguest_data - __PAGE_OFFSET + LGUEST_DATA_pgdir, %esi
diff --git a/arch/x86/mach-rdc321x/gpio.c b/arch/x86/mach-rdc321x/gpio.c
index 031269163bd..247f33d3a40 100644
--- a/arch/x86/mach-rdc321x/gpio.c
+++ b/arch/x86/mach-rdc321x/gpio.c
@@ -1,91 +1,194 @@
/*
- * Copyright (C) 2007, OpenWrt.org, Florian Fainelli <florian@openwrt.org>
- * RDC321x architecture specific GPIO support
+ * GPIO support for RDC SoC R3210/R8610
+ *
+ * Copyright (C) 2007, Florian Fainelli <florian@openwrt.org>
+ * Copyright (C) 2008, Volker Weiss <dev@tintuc.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
*/
-#include <linux/autoconf.h>
-#include <linux/init.h>
+
+#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/types.h>
#include <linux/module.h>
-#include <linux/delay.h>
+#include <asm/gpio.h>
#include <asm/mach-rdc321x/rdc321x_defs.h>
-static inline int rdc_gpio_is_valid(unsigned gpio)
+
+/* spin lock to protect our private copy of GPIO data register plus
+ the access to PCI conf registers. */
+static DEFINE_SPINLOCK(gpio_lock);
+
+/* copy of GPIO data registers */
+static u32 gpio_data_reg1;
+static u32 gpio_data_reg2;
+
+static u32 gpio_request_data[2];
+
+
+static inline void rdc321x_conf_write(unsigned addr, u32 value)
{
- return (gpio <= RDC_MAX_GPIO);
+ outl((1 << 31) | (7 << 11) | addr, RDC3210_CFGREG_ADDR);
+ outl(value, RDC3210_CFGREG_DATA);
}
-static unsigned int rdc_gpio_read(unsigned gpio)
+static inline void rdc321x_conf_or(unsigned addr, u32 value)
{
- unsigned int val;
-
- val = 0x80000000 | (7 << 11) | ((gpio&0x20?0x84:0x48));
- outl(val, RDC3210_CFGREG_ADDR);
- udelay(10);
- val = inl(RDC3210_CFGREG_DATA);
- val |= (0x1 << (gpio & 0x1F));
- outl(val, RDC3210_CFGREG_DATA);
- udelay(10);
- val = 0x80000000 | (7 << 11) | ((gpio&0x20?0x88:0x4C));
- outl(val, RDC3210_CFGREG_ADDR);
- udelay(10);
- val = inl(RDC3210_CFGREG_DATA);
-
- return val;
+ outl((1 << 31) | (7 << 11) | addr, RDC3210_CFGREG_ADDR);
+ value |= inl(RDC3210_CFGREG_DATA);
+ outl(value, RDC3210_CFGREG_DATA);
}
-static void rdc_gpio_write(unsigned int val)
+static inline u32 rdc321x_conf_read(unsigned addr)
{
- if (val) {
- outl(val, RDC3210_CFGREG_DATA);
- udelay(10);
- }
+ outl((1 << 31) | (7 << 11) | addr, RDC3210_CFGREG_ADDR);
+
+ return inl(RDC3210_CFGREG_DATA);
}
-int rdc_gpio_get_value(unsigned gpio)
+/* configure pin as GPIO */
+static void rdc321x_configure_gpio(unsigned gpio)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&gpio_lock, flags);
+ rdc321x_conf_or(gpio < 32
+ ? RDC321X_GPIO_CTRL_REG1 : RDC321X_GPIO_CTRL_REG2,
+ 1 << (gpio & 0x1f));
+ spin_unlock_irqrestore(&gpio_lock, flags);
+}
+
+/* initially setup the 2 copies of the gpio data registers.
+ This function must be called by the platform setup code. */
+void __init rdc321x_gpio_setup()
+{
+ /* this might not be, what others (BIOS, bootloader, etc.)
+ wrote to these registers before, but it's a good guess. Still
+ better than just using 0xffffffff. */
+
+ gpio_data_reg1 = rdc321x_conf_read(RDC321X_GPIO_DATA_REG1);
+ gpio_data_reg2 = rdc321x_conf_read(RDC321X_GPIO_DATA_REG2);
+}
+
+/* determine, if gpio number is valid */
+static inline int rdc321x_is_gpio(unsigned gpio)
+{
+ return gpio <= RDC321X_MAX_GPIO;
+}
+
+/* request GPIO */
+int rdc_gpio_request(unsigned gpio, const char *label)
{
- if (rdc_gpio_is_valid(gpio))
- return (int)rdc_gpio_read(gpio);
- else
+ unsigned long flags;
+
+ if (!rdc321x_is_gpio(gpio))
return -EINVAL;
+
+ spin_lock_irqsave(&gpio_lock, flags);
+ if (gpio_request_data[(gpio & 0x20) ? 1 : 0] & (1 << (gpio & 0x1f)))
+ goto inuse;
+ gpio_request_data[(gpio & 0x20) ? 1 : 0] |= (1 << (gpio & 0x1f));
+ spin_unlock_irqrestore(&gpio_lock, flags);
+
+ return 0;
+inuse:
+ spin_unlock_irqrestore(&gpio_lock, flags);
+ return -EINVAL;
}
-EXPORT_SYMBOL(rdc_gpio_get_value);
+EXPORT_SYMBOL(rdc_gpio_request);
-void rdc_gpio_set_value(unsigned gpio, int value)
+/* release previously-claimed GPIO */
+void rdc_gpio_free(unsigned gpio)
{
- unsigned int val;
+ unsigned long flags;
- if (!rdc_gpio_is_valid(gpio))
+ if (!rdc321x_is_gpio(gpio))
return;
- val = rdc_gpio_read(gpio);
+ spin_lock_irqsave(&gpio_lock, flags);
+ gpio_request_data[(gpio & 0x20) ? 1 : 0] &= ~(1 << (gpio & 0x1f));
+ spin_unlock_irqrestore(&gpio_lock, flags);
+}
+EXPORT_SYMBOL(rdc_gpio_free);
+
+/* read GPIO pin */
+int rdc_gpio_get_value(unsigned gpio)
+{
+ u32 reg;
+ unsigned long flags;
+
+ spin_lock_irqsave(&gpio_lock, flags);
+ reg = rdc321x_conf_read(gpio < 32
+ ? RDC321X_GPIO_DATA_REG1 : RDC321X_GPIO_DATA_REG2);
+ spin_unlock_irqrestore(&gpio_lock, flags);
- if (value)
- val &= ~(0x1 << (gpio & 0x1F));
- else
- val |= (0x1 << (gpio & 0x1F));
+ return (1 << (gpio & 0x1f)) & reg ? 1 : 0;
+}
+EXPORT_SYMBOL(rdc_gpio_get_value);
- rdc_gpio_write(val);
+/* set GPIO pin to value */
+void rdc_gpio_set_value(unsigned gpio, int value)
+{
+ unsigned long flags;
+ u32 reg;
+
+ reg = 1 << (gpio & 0x1f);
+ if (gpio < 32) {
+ spin_lock_irqsave(&gpio_lock, flags);
+ if (value)
+ gpio_data_reg1 |= reg;
+ else
+ gpio_data_reg1 &= ~reg;
+ rdc321x_conf_write(RDC321X_GPIO_DATA_REG1, gpio_data_reg1);
+ spin_unlock_irqrestore(&gpio_lock, flags);
+ } else {
+ spin_lock_irqsave(&gpio_lock, flags);
+ if (value)
+ gpio_data_reg2 |= reg;
+ else
+ gpio_data_reg2 &= ~reg;
+ rdc321x_conf_write(RDC321X_GPIO_DATA_REG2, gpio_data_reg2);
+ spin_unlock_irqrestore(&gpio_lock, flags);
+ }
}
EXPORT_SYMBOL(rdc_gpio_set_value);
+/* configure GPIO pin as input */
int rdc_gpio_direction_input(unsigned gpio)
{
+ if (!rdc321x_is_gpio(gpio))
+ return -EINVAL;
+
+ rdc321x_configure_gpio(gpio);
+
return 0;
}
EXPORT_SYMBOL(rdc_gpio_direction_input);
+/* configure GPIO pin as output and set value */
int rdc_gpio_direction_output(unsigned gpio, int value)
{
+ if (!rdc321x_is_gpio(gpio))
+ return -EINVAL;
+
+ gpio_set_value(gpio, value);
+ rdc321x_configure_gpio(gpio);
+
return 0;
}
EXPORT_SYMBOL(rdc_gpio_direction_output);
-
-
diff --git a/arch/x86/mach-rdc321x/platform.c b/arch/x86/mach-rdc321x/platform.c
index dda6024a586..a037041817c 100644
--- a/arch/x86/mach-rdc321x/platform.c
+++ b/arch/x86/mach-rdc321x/platform.c
@@ -62,6 +62,8 @@ static struct platform_device *rdc321x_devs[] = {
static int __init rdc_board_setup(void)
{
+ rdc321x_gpio_setup();
+
return platform_add_devices(rdc321x_devs, ARRAY_SIZE(rdc321x_devs));
}
diff --git a/arch/x86/mach-visws/traps.c b/arch/x86/mach-visws/traps.c
index 843b67acf43..bfac6ba10f8 100644
--- a/arch/x86/mach-visws/traps.c
+++ b/arch/x86/mach-visws/traps.c
@@ -46,8 +46,9 @@ static __init void cobalt_init(void)
*/
set_fixmap(FIX_APIC_BASE, APIC_DEFAULT_PHYS_BASE);
setup_local_APIC();
- printk(KERN_INFO "Local APIC Version %#lx, ID %#lx\n",
- apic_read(APIC_LVR), apic_read(APIC_ID));
+ printk(KERN_INFO "Local APIC Version %#x, ID %#x\n",
+ (unsigned int)apic_read(APIC_LVR),
+ (unsigned int)apic_read(APIC_ID));
set_fixmap(FIX_CO_CPU, CO_CPU_PHYS);
set_fixmap(FIX_CO_APIC, CO_APIC_PHYS);
diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c
index c394ca0720b..8e25e06ff73 100644
--- a/arch/x86/mm/discontig_32.c
+++ b/arch/x86/mm/discontig_32.c
@@ -324,7 +324,6 @@ unsigned long __init setup_memory(void)
* this space and use it to adjust the boundary between ZONE_NORMAL
* and ZONE_HIGHMEM.
*/
- find_max_pfn();
get_memcfg_numa();
kva_pages = calculate_numa_remap_pages();
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index fdc667422df..ec08d838985 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -91,12 +91,10 @@ static int is_prefetch(struct pt_regs *regs, unsigned long addr,
int prefetch = 0;
unsigned char *max_instr;
-#ifdef CONFIG_X86_32
- if (!(__supported_pte_mask & _PAGE_NX))
- return 0;
-#endif
-
- /* If it was a exec fault on NX page, ignore */
+ /*
+ * If it was a exec (instruction fetch) fault on NX page, then
+ * do not ignore the fault:
+ */
if (error_code & PF_INSTR)
return 0;
diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c
index 3d936f23270..9cf33d3ee5b 100644
--- a/arch/x86/mm/highmem_32.c
+++ b/arch/x86/mm/highmem_32.c
@@ -73,15 +73,15 @@ void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
{
enum fixed_addresses idx;
unsigned long vaddr;
- /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
-
- debug_kmap_atomic_prot(type);
+ /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
pagefault_disable();
if (!PageHighMem(page))
return page_address(page);
+ debug_kmap_atomic_prot(type);
+
idx = type + KM_TYPE_NR*smp_processor_id();
vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
BUG_ON(!pte_none(*(kmap_pte-idx)));
diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c
index 4fbafb4bc2f..0b3d567e686 100644
--- a/arch/x86/mm/hugetlbpage.c
+++ b/arch/x86/mm/hugetlbpage.c
@@ -178,7 +178,7 @@ follow_huge_addr(struct mm_struct *mm, unsigned long address, int write)
page = &pte_page(*pte)[vpfn % (HPAGE_SIZE/PAGE_SIZE)];
- WARN_ON(!PageCompound(page));
+ WARN_ON(!PageHead(page));
return page;
}
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 8fe576baa14..794895c6dcc 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -106,7 +106,7 @@ static int ioremap_change_attr(unsigned long vaddr, unsigned long size,
* have to convert them into an offset in a page-aligned mapping, but the
* caller shouldn't need to know that small detail.
*/
-static void __iomem *__ioremap(unsigned long phys_addr, unsigned long size,
+static void __iomem *__ioremap(resource_size_t phys_addr, unsigned long size,
enum ioremap_mode mode)
{
unsigned long pfn, offset, last_addr, vaddr;
@@ -137,7 +137,11 @@ static void __iomem *__ioremap(unsigned long phys_addr, unsigned long size,
switch (mode) {
case IOR_MODE_UNCACHED:
default:
- prot = PAGE_KERNEL_NOCACHE;
+ /*
+ * FIXME: we will use UC MINUS for now, as video fb drivers
+ * depend on it. Upcoming ioremap_wc() will fix this behavior.
+ */
+ prot = PAGE_KERNEL_UC_MINUS;
break;
case IOR_MODE_CACHED:
prot = PAGE_KERNEL;
@@ -193,13 +197,13 @@ static void __iomem *__ioremap(unsigned long phys_addr, unsigned long size,
*
* Must be freed with iounmap.
*/
-void __iomem *ioremap_nocache(unsigned long phys_addr, unsigned long size)
+void __iomem *ioremap_nocache(resource_size_t phys_addr, unsigned long size)
{
return __ioremap(phys_addr, size, IOR_MODE_UNCACHED);
}
EXPORT_SYMBOL(ioremap_nocache);
-void __iomem *ioremap_cache(unsigned long phys_addr, unsigned long size)
+void __iomem *ioremap_cache(resource_size_t phys_addr, unsigned long size)
{
return __ioremap(phys_addr, size, IOR_MODE_CACHED);
}
diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
index 8ccfee10f5b..16b82ad34b9 100644
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -221,8 +221,7 @@ void __init setup_node_bootmem(int nodeid, unsigned long start,
bootmap_pages<<PAGE_SHIFT, PAGE_SIZE);
if (bootmap == NULL) {
if (nodedata_phys < start || nodedata_phys >= end)
- free_bootmem((unsigned long)node_data[nodeid],
- pgdat_size);
+ free_bootmem(nodedata_phys, pgdat_size);
node_data[nodeid] = NULL;
return;
}
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 14e48b5a94b..7b79f6be4e7 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -771,7 +771,7 @@ static inline int change_page_attr_clear(unsigned long addr, int numpages,
int set_memory_uc(unsigned long addr, int numpages)
{
return change_page_attr_set(addr, numpages,
- __pgprot(_PAGE_PCD | _PAGE_PWT));
+ __pgprot(_PAGE_PCD));
}
EXPORT_SYMBOL(set_memory_uc);
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 8b9ee27805f..de4e6f05840 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -95,7 +95,7 @@ struct shared_info *HYPERVISOR_shared_info = (void *)&dummy_shared_info;
*
* 0: not available, 1: available
*/
-static int have_vcpu_info_placement = 0;
+static int have_vcpu_info_placement = 1;
static void __init xen_vcpu_setup(int cpu)
{
@@ -103,6 +103,7 @@ static void __init xen_vcpu_setup(int cpu)
int err;
struct vcpu_info *vcpup;
+ BUG_ON(HYPERVISOR_shared_info == &dummy_shared_info);
per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu];
if (!have_vcpu_info_placement)
@@ -805,33 +806,43 @@ static __init void xen_pagetable_setup_start(pgd_t *base)
PFN_DOWN(__pa(xen_start_info->pt_base)));
}
-static __init void xen_pagetable_setup_done(pgd_t *base)
+static __init void setup_shared_info(void)
{
- /* This will work as long as patching hasn't happened yet
- (which it hasn't) */
- pv_mmu_ops.alloc_pt = xen_alloc_pt;
- pv_mmu_ops.alloc_pd = xen_alloc_pd;
- pv_mmu_ops.release_pt = xen_release_pt;
- pv_mmu_ops.release_pd = xen_release_pt;
- pv_mmu_ops.set_pte = xen_set_pte;
-
if (!xen_feature(XENFEAT_auto_translated_physmap)) {
+ unsigned long addr = fix_to_virt(FIX_PARAVIRT_BOOTMAP);
+
/*
* Create a mapping for the shared info page.
* Should be set_fixmap(), but shared_info is a machine
* address with no corresponding pseudo-phys address.
*/
- set_pte_mfn(fix_to_virt(FIX_PARAVIRT_BOOTMAP),
+ set_pte_mfn(addr,
PFN_DOWN(xen_start_info->shared_info),
PAGE_KERNEL);
- HYPERVISOR_shared_info =
- (struct shared_info *)fix_to_virt(FIX_PARAVIRT_BOOTMAP);
-
+ HYPERVISOR_shared_info = (struct shared_info *)addr;
} else
HYPERVISOR_shared_info =
(struct shared_info *)__va(xen_start_info->shared_info);
+#ifndef CONFIG_SMP
+ /* In UP this is as good a place as any to set up shared info */
+ xen_setup_vcpu_info_placement();
+#endif
+}
+
+static __init void xen_pagetable_setup_done(pgd_t *base)
+{
+ /* This will work as long as patching hasn't happened yet
+ (which it hasn't) */
+ pv_mmu_ops.alloc_pt = xen_alloc_pt;
+ pv_mmu_ops.alloc_pd = xen_alloc_pd;
+ pv_mmu_ops.release_pt = xen_release_pt;
+ pv_mmu_ops.release_pd = xen_release_pt;
+ pv_mmu_ops.set_pte = xen_set_pte;
+
+ setup_shared_info();
+
/* Actually pin the pagetable down, but we can't set PG_pinned
yet because the page structures don't exist yet. */
{
@@ -1182,15 +1193,9 @@ asmlinkage void __init xen_start_kernel(void)
x86_write_percpu(xen_cr3, __pa(pgd));
x86_write_percpu(xen_current_cr3, __pa(pgd));
-#ifdef CONFIG_SMP
/* Don't do the full vcpu_info placement stuff until we have a
- possible map. */
+ possible map and a non-dummy shared_info. */
per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
-#else
- /* May as well do it now, since there's no good time to call
- it later on UP. */
- xen_setup_vcpu_info_placement();
-#endif
pv_info.kernel_rpl = 1;
if (xen_feature(XENFEAT_supervisor_mode_kernel))
diff --git a/arch/x86/xen/xen-asm.S b/arch/x86/xen/xen-asm.S
index 1a43b60c0c6..6b7190449d0 100644
--- a/arch/x86/xen/xen-asm.S
+++ b/arch/x86/xen/xen-asm.S
@@ -33,12 +33,17 @@
events, then enter the hypervisor to get them handled.
*/
ENTRY(xen_irq_enable_direct)
- /* Clear mask and test pending */
- andw $0x00ff, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_pending
+ /* Unmask events */
+ movb $0, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_mask
+
/* Preempt here doesn't matter because that will deal with
any pending interrupts. The pending check may end up being
run on the wrong CPU, but that doesn't hurt. */
+
+ /* Test for pending */
+ testb $0xff, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_pending
jz 1f
+
2: call check_events
1:
ENDPATCH(xen_irq_enable_direct)
diff --git a/block/blk-settings.c b/block/blk-settings.c
index 1344a0ea5cc..5713f7e5cbd 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -140,7 +140,7 @@ void blk_queue_bounce_limit(struct request_queue *q, u64 dma_addr)
/* Assume anything <= 4GB can be handled by IOMMU.
Actually some IOMMUs can handle everything, but I don't
know of a way to test this here. */
- if (b_pfn <= (min_t(u64, 0xffffffff, BLK_BOUNCE_HIGH) >> PAGE_SHIFT))
+ if (b_pfn < (min_t(u64, 0x100000000UL, BLK_BOUNCE_HIGH) >> PAGE_SHIFT))
dma = 1;
q->bounce_pfn = max_low_pfn;
#else
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 0f962ecae91..f26da2bfcc1 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -1143,24 +1143,37 @@ static void cfq_put_queue(struct cfq_queue *cfqq)
}
/*
- * Call func for each cic attached to this ioc. Returns number of cic's seen.
+ * Call func for each cic attached to this ioc.
*/
-static unsigned int
+static void
call_for_each_cic(struct io_context *ioc,
void (*func)(struct io_context *, struct cfq_io_context *))
{
struct cfq_io_context *cic;
struct hlist_node *n;
- int called = 0;
rcu_read_lock();
- hlist_for_each_entry_rcu(cic, n, &ioc->cic_list, cic_list) {
+ hlist_for_each_entry_rcu(cic, n, &ioc->cic_list, cic_list)
func(ioc, cic);
- called++;
- }
rcu_read_unlock();
+}
+
+static void cfq_cic_free_rcu(struct rcu_head *head)
+{
+ struct cfq_io_context *cic;
+
+ cic = container_of(head, struct cfq_io_context, rcu_head);
+
+ kmem_cache_free(cfq_ioc_pool, cic);
+ elv_ioc_count_dec(ioc_count);
+
+ if (ioc_gone && !elv_ioc_count_read(ioc_count))
+ complete(ioc_gone);
+}
- return called;
+static void cfq_cic_free(struct cfq_io_context *cic)
+{
+ call_rcu(&cic->rcu_head, cfq_cic_free_rcu);
}
static void cic_free_func(struct io_context *ioc, struct cfq_io_context *cic)
@@ -1174,24 +1187,18 @@ static void cic_free_func(struct io_context *ioc, struct cfq_io_context *cic)
hlist_del_rcu(&cic->cic_list);
spin_unlock_irqrestore(&ioc->lock, flags);
- kmem_cache_free(cfq_ioc_pool, cic);
+ cfq_cic_free(cic);
}
static void cfq_free_io_context(struct io_context *ioc)
{
- int freed;
-
/*
- * ioc->refcount is zero here, so no more cic's are allowed to be
- * linked into this ioc. So it should be ok to iterate over the known
- * list, we will see all cic's since no new ones are added.
+ * ioc->refcount is zero here, or we are called from elv_unregister(),
+ * so no more cic's are allowed to be linked into this ioc. So it
+ * should be ok to iterate over the known list, we will see all cic's
+ * since no new ones are added.
*/
- freed = call_for_each_cic(ioc, cic_free_func);
-
- elv_ioc_count_mod(ioc_count, -freed);
-
- if (ioc_gone && !elv_ioc_count_read(ioc_count))
- complete(ioc_gone);
+ call_for_each_cic(ioc, cic_free_func);
}
static void cfq_exit_cfqq(struct cfq_data *cfqd, struct cfq_queue *cfqq)
@@ -1458,15 +1465,6 @@ cfq_get_queue(struct cfq_data *cfqd, int is_sync, struct io_context *ioc,
return cfqq;
}
-static void cfq_cic_free(struct cfq_io_context *cic)
-{
- kmem_cache_free(cfq_ioc_pool, cic);
- elv_ioc_count_dec(ioc_count);
-
- if (ioc_gone && !elv_ioc_count_read(ioc_count))
- complete(ioc_gone);
-}
-
/*
* We drop cfq io contexts lazily, so we may find a dead one.
*/
@@ -2138,7 +2136,7 @@ static int __init cfq_slab_setup(void)
if (!cfq_pool)
goto fail;
- cfq_ioc_pool = KMEM_CACHE(cfq_io_context, SLAB_DESTROY_BY_RCU);
+ cfq_ioc_pool = KMEM_CACHE(cfq_io_context, 0);
if (!cfq_ioc_pool)
goto fail;
@@ -2286,7 +2284,6 @@ static void __exit cfq_exit(void)
smp_wmb();
if (elv_ioc_count_read(ioc_count))
wait_for_completion(ioc_gone);
- synchronize_rcu();
cfq_slab_kill();
}
diff --git a/crypto/async_tx/async_xor.c b/crypto/async_tx/async_xor.c
index 7a9db353f19..1c445c7bdab 100644
--- a/crypto/async_tx/async_xor.c
+++ b/crypto/async_tx/async_xor.c
@@ -271,7 +271,7 @@ async_xor_zero_sum(struct page *dest, struct page **src_list,
BUG_ON(src_cnt <= 1);
- if (device) {
+ if (device && src_cnt <= device->max_xor) {
dma_addr_t *dma_src = (dma_addr_t *) src_list;
unsigned long dma_prep_flags = cb_fn ? DMA_PREP_INTERRUPT : 0;
int i;
diff --git a/crypto/xcbc.c b/crypto/xcbc.c
index 2feb0f239c3..b63b633e549 100644
--- a/crypto/xcbc.c
+++ b/crypto/xcbc.c
@@ -116,13 +116,11 @@ static int crypto_xcbc_digest_update2(struct hash_desc *pdesc,
struct crypto_xcbc_ctx *ctx = crypto_hash_ctx_aligned(parent);
struct crypto_cipher *tfm = ctx->child;
int bs = crypto_hash_blocksize(parent);
- unsigned int i = 0;
- do {
-
- struct page *pg = sg_page(&sg[i]);
- unsigned int offset = sg[i].offset;
- unsigned int slen = sg[i].length;
+ for (;;) {
+ struct page *pg = sg_page(sg);
+ unsigned int offset = sg->offset;
+ unsigned int slen = sg->length;
if (unlikely(slen > nbytes))
slen = nbytes;
@@ -182,8 +180,11 @@ static int crypto_xcbc_digest_update2(struct hash_desc *pdesc,
offset = 0;
pg++;
}
- i++;
- } while (nbytes>0);
+
+ if (!nbytes)
+ break;
+ sg = scatterwalk_sg_next(sg);
+ }
return 0;
}
diff --git a/drivers/acpi/asus_acpi.c b/drivers/acpi/asus_acpi.c
index d25ef961415..44ad90c03c2 100644
--- a/drivers/acpi/asus_acpi.c
+++ b/drivers/acpi/asus_acpi.c
@@ -610,7 +610,7 @@ write_led(const char __user * buffer, unsigned long count,
(led_out) ? (hotk->status | ledmask) : (hotk->status & ~ledmask);
if (invert) /* invert target value */
- led_out = !led_out & 0x1;
+ led_out = !led_out;
if (!write_acpi_int(hotk->handle, ledname, led_out, NULL))
printk(KERN_WARNING "Asus ACPI: LED (%s) write failed\n",
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index f6215e80980..d5729d5dc19 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -293,13 +293,12 @@ static int extract_package(struct acpi_battery *battery,
strncpy(ptr, (u8 *)&element->integer.value,
sizeof(acpi_integer));
ptr[sizeof(acpi_integer)] = 0;
- } else return -EFAULT;
+ } else
+ *ptr = 0; /* don't have value */
} else {
- if (element->type == ACPI_TYPE_INTEGER) {
- int *x = (int *)((u8 *)battery +
- offsets[i].offset);
- *x = element->integer.value;
- } else return -EFAULT;
+ int *x = (int *)((u8 *)battery + offsets[i].offset);
+ *x = (element->type == ACPI_TYPE_INTEGER) ?
+ element->integer.value : -1;
}
}
return 0;
diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c
index 307cef65c24..fa44fb96fc3 100644
--- a/drivers/acpi/dock.c
+++ b/drivers/acpi/dock.c
@@ -710,6 +710,7 @@ static ssize_t write_undock(struct device *dev, struct device_attribute *attr,
if (!count)
return -EINVAL;
+ begin_undock(dock_station);
ret = handle_eject_request(dock_station, ACPI_NOTIFY_EJECT_REQUEST);
return ret ? ret: count;
}
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index e7e197e3a4f..7222a18a031 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -129,7 +129,6 @@ static struct acpi_ec {
struct mutex lock;
wait_queue_head_t wait;
struct list_head list;
- atomic_t irq_count;
u8 handlers_installed;
} *boot_ec, *first_ec;
@@ -182,8 +181,6 @@ static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, int force_poll)
{
int ret = 0;
- atomic_set(&ec->irq_count, 0);
-
if (unlikely(event == ACPI_EC_EVENT_OBF_1 &&
test_bit(EC_FLAGS_NO_OBF1_GPE, &ec->flags)))
force_poll = 1;
@@ -230,7 +227,6 @@ static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, int force_poll)
while (time_before(jiffies, delay)) {
if (acpi_ec_check_status(ec, event))
goto end;
- msleep(5);
}
}
pr_err(PREFIX "acpi_ec_wait timeout,"
@@ -533,13 +529,6 @@ static u32 acpi_ec_gpe_handler(void *data)
struct acpi_ec *ec = data;
pr_debug(PREFIX "~~~> interrupt\n");
- atomic_inc(&ec->irq_count);
- if (atomic_read(&ec->irq_count) > 5) {
- pr_err(PREFIX "GPE storm detected, disabling EC GPE\n");
- acpi_disable_gpe(NULL, ec->gpe, ACPI_ISR);
- clear_bit(EC_FLAGS_GPE_MODE, &ec->flags);
- return ACPI_INTERRUPT_HANDLED;
- }
clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags))
wake_up(&ec->wait);
diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index 7af414a3c63..89022a74fae 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -131,8 +131,8 @@ struct prt_quirk {
*/
static struct prt_quirk prt_quirks[] = {
{ medion_md9580, 0, 0, 9, 'A',
- "\\_SB_.PCI0.ISA.LNKA",
- "\\_SB_.PCI0.ISA.LNKB"},
+ "\\_SB_.PCI0.ISA_.LNKA",
+ "\\_SB_.PCI0.ISA_.LNKB"},
{ dell_optiplex, 0, 0, 0xd, 'A',
"\\_SB_.LNKB",
"\\_SB_.LNKA"},
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 6f3b217699e..788da9781f8 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -216,8 +216,10 @@ static void acpi_safe_halt(void)
* test NEED_RESCHED:
*/
smp_mb();
- if (!need_resched())
+ if (!need_resched()) {
safe_halt();
+ local_irq_disable();
+ }
current_thread_info()->status |= TS_POLLING;
}
@@ -421,7 +423,9 @@ static void acpi_processor_idle(void)
else
acpi_safe_halt();
- local_irq_enable();
+ if (irqs_disabled())
+ local_irq_enable();
+
return;
}
@@ -530,7 +534,9 @@ static void acpi_processor_idle(void)
* skew otherwise.
*/
sleep_ticks = 0xFFFFFFFF;
- local_irq_enable();
+ if (irqs_disabled())
+ local_irq_enable();
+
break;
case ACPI_STATE_C2:
@@ -1481,7 +1487,6 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev,
return 0;
}
- acpi_unlazy_tlb(smp_processor_id());
/*
* Must be done before busmaster disable as we might need to
* access HPET !
@@ -1571,6 +1576,8 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,
return 0;
}
+ acpi_unlazy_tlb(smp_processor_id());
+
/* Tell the scheduler that we are going deep-idle: */
sched_clock_idle_sleep_event();
/*
@@ -1686,7 +1693,9 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr)
switch (cx->type) {
case ACPI_STATE_C1:
state->flags |= CPUIDLE_FLAG_SHALLOW;
- state->flags |= CPUIDLE_FLAG_TIME_VALID;
+ if (cx->entry_method == ACPI_CSTATE_FFH)
+ state->flags |= CPUIDLE_FLAG_TIME_VALID;
+
state->enter = acpi_idle_enter_c1;
dev->safe_state = state;
break;
diff --git a/drivers/acpi/sbshc.c b/drivers/acpi/sbshc.c
index a2cf3008ce6..bcf2c70fca8 100644
--- a/drivers/acpi/sbshc.c
+++ b/drivers/acpi/sbshc.c
@@ -130,7 +130,6 @@ static int acpi_smbus_transaction(struct acpi_smb_hc *hc, u8 protocol,
goto end;
}
smb_hc_write(hc, ACPI_SMB_COMMAND, command);
- smb_hc_write(hc, ACPI_SMB_COMMAND, command);
if (!(protocol & 0x01)) {
smb_hc_write(hc, ACPI_SMB_BLOCK_COUNT, length);
for (i = 0; i < length; ++i)
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 57570ac4780..e6ce262b5d4 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -39,20 +39,26 @@ static int create_modalias(struct acpi_device *acpi_dev, char *modalias,
int size)
{
int len;
+ int count;
- if (!acpi_dev->flags.hardware_id)
+ if (!acpi_dev->flags.hardware_id && !acpi_dev->flags.compatible_ids)
return -ENODEV;
- len = snprintf(modalias, size, "acpi:%s:",
- acpi_dev->pnp.hardware_id);
- if (len < 0 || len >= size)
- return -EINVAL;
+ len = snprintf(modalias, size, "acpi:");
size -= len;
+ if (acpi_dev->flags.hardware_id) {
+ count = snprintf(&modalias[len], size, "%s:",
+ acpi_dev->pnp.hardware_id);
+ if (count < 0 || count >= size)
+ return -EINVAL;
+ len += count;
+ size -= count;
+ }
+
if (acpi_dev->flags.compatible_ids) {
struct acpi_compatible_id_list *cid_list;
int i;
- int count;
cid_list = acpi_dev->pnp.cid_list;
for (i = 0; i < cid_list->count; i++) {
diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c
index d2f71a54726..71183eea790 100644
--- a/drivers/acpi/sleep/main.c
+++ b/drivers/acpi/sleep/main.c
@@ -26,21 +26,6 @@ u8 sleep_states[ACPI_S_STATE_COUNT];
#ifdef CONFIG_PM_SLEEP
static u32 acpi_target_sleep_state = ACPI_STATE_S0;
-static bool acpi_sleep_finish_wake_up;
-
-/*
- * ACPI 2.0 and later want us to execute _PTS after suspending devices, so we
- * allow the user to request that behavior by using the 'acpi_new_pts_ordering'
- * kernel command line option that causes the following variable to be set.
- */
-static bool new_pts_ordering;
-
-static int __init acpi_new_pts_ordering(char *str)
-{
- new_pts_ordering = true;
- return 1;
-}
-__setup("acpi_new_pts_ordering", acpi_new_pts_ordering);
#endif
static int acpi_sleep_prepare(u32 acpi_state)
@@ -91,14 +76,6 @@ static int acpi_pm_begin(suspend_state_t pm_state)
if (sleep_states[acpi_state]) {
acpi_target_sleep_state = acpi_state;
- if (new_pts_ordering)
- return 0;
-
- error = acpi_sleep_prepare(acpi_state);
- if (error)
- acpi_target_sleep_state = ACPI_STATE_S0;
- else
- acpi_sleep_finish_wake_up = true;
} else {
printk(KERN_ERR "ACPI does not support this state: %d\n",
pm_state);
@@ -116,14 +93,11 @@ static int acpi_pm_begin(suspend_state_t pm_state)
static int acpi_pm_prepare(void)
{
- if (new_pts_ordering) {
- int error = acpi_sleep_prepare(acpi_target_sleep_state);
+ int error = acpi_sleep_prepare(acpi_target_sleep_state);
- if (error) {
- acpi_target_sleep_state = ACPI_STATE_S0;
- return error;
- }
- acpi_sleep_finish_wake_up = true;
+ if (error) {
+ acpi_target_sleep_state = ACPI_STATE_S0;
+ return error;
}
return ACPI_SUCCESS(acpi_hw_disable_all_gpes()) ? 0 : -EFAULT;
@@ -212,7 +186,6 @@ static void acpi_pm_finish(void)
acpi_set_firmware_waking_vector((acpi_physical_address) 0);
acpi_target_sleep_state = ACPI_STATE_S0;
- acpi_sleep_finish_wake_up = false;
#ifdef CONFIG_X86
if (init_8259A_after_S1) {
@@ -229,11 +202,10 @@ static void acpi_pm_finish(void)
static void acpi_pm_end(void)
{
/*
- * This is necessary in case acpi_pm_finish() is not called directly
- * during a failing transition to a sleep state.
+ * This is necessary in case acpi_pm_finish() is not called during a
+ * failing transition to a sleep state.
*/
- if (acpi_sleep_finish_wake_up)
- acpi_pm_finish();
+ acpi_target_sleep_state = ACPI_STATE_S0;
}
static int acpi_pm_state_valid(suspend_state_t pm_state)
@@ -285,31 +257,18 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
#ifdef CONFIG_HIBERNATION
static int acpi_hibernation_begin(void)
{
- int error;
-
acpi_target_sleep_state = ACPI_STATE_S4;
- if (new_pts_ordering)
- return 0;
- error = acpi_sleep_prepare(ACPI_STATE_S4);
- if (error)
- acpi_target_sleep_state = ACPI_STATE_S0;
- else
- acpi_sleep_finish_wake_up = true;
-
- return error;
+ return 0;
}
static int acpi_hibernation_prepare(void)
{
- if (new_pts_ordering) {
- int error = acpi_sleep_prepare(ACPI_STATE_S4);
+ int error = acpi_sleep_prepare(ACPI_STATE_S4);
- if (error) {
- acpi_target_sleep_state = ACPI_STATE_S0;
- return error;
- }
- acpi_sleep_finish_wake_up = true;
+ if (error) {
+ acpi_target_sleep_state = ACPI_STATE_S0;
+ return error;
}
return ACPI_SUCCESS(acpi_hw_disable_all_gpes()) ? 0 : -EFAULT;
@@ -353,17 +312,15 @@ static void acpi_hibernation_finish(void)
acpi_set_firmware_waking_vector((acpi_physical_address) 0);
acpi_target_sleep_state = ACPI_STATE_S0;
- acpi_sleep_finish_wake_up = false;
}
static void acpi_hibernation_end(void)
{
/*
* This is necessary in case acpi_hibernation_finish() is not called
- * directly during a failing transition to the sleep state.
+ * during a failing transition to the sleep state.
*/
- if (acpi_sleep_finish_wake_up)
- acpi_hibernation_finish();
+ acpi_target_sleep_state = ACPI_STATE_S0;
}
static int acpi_hibernation_pre_restore(void)
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 1bc0c74f275..12fb44f1676 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -807,40 +807,11 @@ static void acpi_video_bus_find_cap(struct acpi_video_bus *video)
static int acpi_video_bus_check(struct acpi_video_bus *video)
{
acpi_status status = -ENOENT;
- long device_id;
- struct device *dev;
- struct acpi_device *device;
+
if (!video)
return -EINVAL;
- device = video->device;
-
- status =
- acpi_evaluate_integer(device->handle, "_ADR", NULL, &device_id);
-
- if (!ACPI_SUCCESS(status))
- return -ENODEV;
-
- /* We need to attempt to determine whether the _ADR refers to a
- PCI device or not. There's no terribly good way to do this,
- so the best we can hope for is to assume that there'll never
- be a video device in the host bridge */
- if (device_id >= 0x10000) {
- /* It looks like a PCI device. Does it exist? */
- dev = acpi_get_physical_device(device->handle);
- } else {
- /* It doesn't look like a PCI device. Does its parent
- exist? */
- acpi_handle phandle;
- if (acpi_get_parent(device->handle, &phandle))
- return -ENODEV;
- dev = acpi_get_physical_device(phandle);
- }
- if (!dev)
- return -ENODEV;
- put_device(dev);
-
/* Since there is no HID, CID and so on for VGA driver, we have
* to check well known required nodes.
*/
@@ -1366,37 +1337,8 @@ acpi_video_bus_write_DOS(struct file *file,
static int acpi_video_bus_add_fs(struct acpi_device *device)
{
- long device_id;
- int status;
struct proc_dir_entry *entry = NULL;
struct acpi_video_bus *video;
- struct device *dev;
-
- status =
- acpi_evaluate_integer(device->handle, "_ADR", NULL, &device_id);
-
- if (!ACPI_SUCCESS(status))
- return -ENODEV;
-
- /* We need to attempt to determine whether the _ADR refers to a
- PCI device or not. There's no terribly good way to do this,
- so the best we can hope for is to assume that there'll never
- be a video device in the host bridge */
- if (device_id >= 0x10000) {
- /* It looks like a PCI device. Does it exist? */
- dev = acpi_get_physical_device(device->handle);
- } else {
- /* It doesn't look like a PCI device. Does its parent
- exist? */
- acpi_handle phandle;
- if (acpi_get_parent(device->handle, &phandle))
- return -ENODEV;
- dev = acpi_get_physical_device(phandle);
- }
- if (!dev)
- return -ENODEV;
- put_device(dev);
-
video = acpi_driver_data(device);
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index e469647330d..25aba69b59b 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -30,6 +30,7 @@ config ATA_NONSTANDARD
config ATA_ACPI
bool
depends on ACPI && PCI
+ select ACPI_DOCK
default y
help
This option adds support for ATA-related ACPI objects.
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 17ee6ed985d..b1eb4e24c86 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -433,6 +433,7 @@ static const struct ata_port_info ahci_port_info[] = {
/* board_ahci_sb600 */
{
AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL |
+ AHCI_HFLAG_32BIT_ONLY |
AHCI_HFLAG_SECT255 | AHCI_HFLAG_NO_PMP),
.flags = AHCI_FLAG_COMMON,
.link_flags = AHCI_LFLAG_COMMON,
@@ -1217,8 +1218,11 @@ static void ahci_dev_config(struct ata_device *dev)
{
struct ahci_host_priv *hpriv = dev->link->ap->host->private_data;
- if (hpriv->flags & AHCI_HFLAG_SECT255)
+ if (hpriv->flags & AHCI_HFLAG_SECT255) {
dev->max_sectors = 255;
+ ata_dev_printk(dev, KERN_INFO,
+ "SB600 AHCI: limiting to 255 sectors per cmd\n");
+ }
}
static unsigned int ahci_dev_classify(struct ata_port *ap)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 4bbe31f98ef..48519887f94 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -972,7 +972,7 @@ static void ata_dev_disable_pm(struct ata_device *dev)
void ata_lpm_schedule(struct ata_port *ap, enum link_pm policy)
{
ap->pm_policy = policy;
- ap->link.eh_info.action |= ATA_EHI_LPM;
+ ap->link.eh_info.action |= ATA_EH_LPM;
ap->link.eh_info.flags |= ATA_EHI_NO_AUTOPSY;
ata_port_schedule_eh(ap);
}
@@ -1416,12 +1416,12 @@ static int ata_hpa_resize(struct ata_device *dev)
/* read native max address */
rc = ata_read_native_max_address(dev, &native_sectors);
if (rc) {
- /* If HPA isn't going to be unlocked, skip HPA
- * resizing from the next try.
+ /* If device aborted the command or HPA isn't going to
+ * be unlocked, skip HPA resizing.
*/
- if (!ata_ignore_hpa) {
+ if (rc == -EACCES || !ata_ignore_hpa) {
ata_dev_printk(dev, KERN_WARNING, "HPA support seems "
- "broken, will skip HPA handling\n");
+ "broken, skipping HPA handling\n");
dev->horkage |= ATA_HORKAGE_BROKEN_HPA;
/* we can continue if device aborted the command */
@@ -2092,24 +2092,34 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
id, sizeof(id[0]) * ATA_ID_WORDS, 0);
if (err_mask) {
if (err_mask & AC_ERR_NODEV_HINT) {
- DPRINTK("ata%u.%d: NODEV after polling detection\n",
- ap->print_id, dev->devno);
+ ata_dev_printk(dev, KERN_DEBUG,
+ "NODEV after polling detection\n");
return -ENOENT;
}
- /* Device or controller might have reported the wrong
- * device class. Give a shot at the other IDENTIFY if
- * the current one is aborted by the device.
- */
- if (may_fallback &&
- (err_mask == AC_ERR_DEV) && (tf.feature & ATA_ABORTED)) {
- may_fallback = 0;
+ if ((err_mask == AC_ERR_DEV) && (tf.feature & ATA_ABORTED)) {
+ /* Device or controller might have reported
+ * the wrong device class. Give a shot at the
+ * other IDENTIFY if the current one is
+ * aborted by the device.
+ */
+ if (may_fallback) {
+ may_fallback = 0;
- if (class == ATA_DEV_ATA)
- class = ATA_DEV_ATAPI;
- else
- class = ATA_DEV_ATA;
- goto retry;
+ if (class == ATA_DEV_ATA)
+ class = ATA_DEV_ATAPI;
+ else
+ class = ATA_DEV_ATA;
+ goto retry;
+ }
+
+ /* Control reaches here iff the device aborted
+ * both flavors of IDENTIFYs which happens
+ * sometimes with phantom devices.
+ */
+ ata_dev_printk(dev, KERN_DEBUG,
+ "both IDENTIFYs aborted, assuming NODEV\n");
+ return -ENOENT;
}
rc = -EIO;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 681252fd814..a5830329eda 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2748,7 +2748,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
ehc->i.flags &= ~ATA_EHI_SETMODE;
}
- if (ehc->i.action & ATA_EHI_LPM)
+ if (ehc->i.action & ATA_EH_LPM)
ata_link_for_each_dev(dev, link)
ata_dev_enable_pm(dev, ap->pm_policy);
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 8f0e8f2bc62..15795394b0a 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -527,6 +527,14 @@ static struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev,
return qc;
}
+static void ata_qc_set_pc_nbytes(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *scmd = qc->scsicmd;
+
+ qc->extrabytes = scmd->request->extra_len;
+ qc->nbytes = scsi_bufflen(scmd) + qc->extrabytes;
+}
+
/**
* ata_dump_status - user friendly display of error info
* @id: id of the port in question
@@ -2539,7 +2547,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc)
}
qc->tf.command = ATA_CMD_PACKET;
- qc->nbytes = scsi_bufflen(scmd) + scmd->request->extra_len;
+ ata_qc_set_pc_nbytes(qc);
/* check whether ATAPI DMA is safe */
if (!using_pio && ata_check_atapi_dma(qc))
@@ -2550,7 +2558,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc)
* want to set it properly, and for DMA where it is
* effectively meaningless.
*/
- nbytes = min(scmd->request->data_len, (unsigned int)63 * 1024);
+ nbytes = min(ata_qc_raw_nbytes(qc), (unsigned int)63 * 1024);
/* Most ATAPI devices which honor transfer chunk size don't
* behave according to the spec when odd chunk size which
@@ -2876,7 +2884,7 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc)
* TODO: find out if we need to do more here to
* cover scatter/gather case.
*/
- qc->nbytes = scsi_bufflen(scmd) + scmd->request->extra_len;
+ ata_qc_set_pc_nbytes(qc);
/* request result TF and be quiet about device error */
qc->flags |= ATA_QCFLAG_RESULT_TF | ATA_QCFLAG_QUIET;
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 109ddd42c26..257951d03db 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -564,7 +564,7 @@ static int it821x_check_atapi_dma(struct ata_queued_cmd *qc)
struct it821x_dev *itdev = ap->private_data;
/* Only use dma for transfers to/from the media. */
- if (qc->nbytes < 2048)
+ if (ata_qc_raw_nbytes(qc) < 2048)
return -EOPNOTSUPP;
/* No ATAPI DMA in smart mode */
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 503245a1eaf..3988e44f493 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -269,7 +269,11 @@ static u8 sil680_init_chip(struct pci_dev *pdev, int *try_mmio)
dev_dbg(&pdev->dev, "sil680: BA5_EN = %d clock = %02X\n",
tmpbyte & 1, tmpbyte & 0x30);
- *try_mmio = (tmpbyte & 1) || pci_resource_start(pdev, 5);
+ *try_mmio = 0;
+#ifdef CONFIG_PPC
+ if (machine_is(cell))
+ *try_mmio = (tmpbyte & 1) || pci_resource_start(pdev, 5);
+#endif
switch(tmpbyte & 0x30) {
case 0x00:
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index f251a5f569d..11c1afea2db 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -46,7 +46,7 @@
#include "sata_promise.h"
#define DRV_NAME "sata_promise"
-#define DRV_VERSION "2.11"
+#define DRV_VERSION "2.12"
enum {
PDC_MAX_PORTS = 4,
@@ -145,7 +145,9 @@ static int pdc_old_sata_check_atapi_dma(struct ata_queued_cmd *qc);
static void pdc_irq_clear(struct ata_port *ap);
static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc);
static void pdc_freeze(struct ata_port *ap);
+static void pdc_sata_freeze(struct ata_port *ap);
static void pdc_thaw(struct ata_port *ap);
+static void pdc_sata_thaw(struct ata_port *ap);
static void pdc_pata_error_handler(struct ata_port *ap);
static void pdc_sata_error_handler(struct ata_port *ap);
static void pdc_post_internal_cmd(struct ata_queued_cmd *qc);
@@ -180,8 +182,8 @@ static const struct ata_port_operations pdc_sata_ops = {
.qc_prep = pdc_qc_prep,
.qc_issue = pdc_qc_issue_prot,
- .freeze = pdc_freeze,
- .thaw = pdc_thaw,
+ .freeze = pdc_sata_freeze,
+ .thaw = pdc_sata_thaw,
.error_handler = pdc_sata_error_handler,
.post_internal_cmd = pdc_post_internal_cmd,
.cable_detect = pdc_sata_cable_detect,
@@ -205,8 +207,8 @@ static const struct ata_port_operations pdc_old_sata_ops = {
.qc_prep = pdc_qc_prep,
.qc_issue = pdc_qc_issue_prot,
- .freeze = pdc_freeze,
- .thaw = pdc_thaw,
+ .freeze = pdc_sata_freeze,
+ .thaw = pdc_sata_thaw,
.error_handler = pdc_sata_error_handler,
.post_internal_cmd = pdc_post_internal_cmd,
.cable_detect = pdc_sata_cable_detect,
@@ -631,6 +633,41 @@ static void pdc_qc_prep(struct ata_queued_cmd *qc)
}
}
+static int pdc_is_sataii_tx4(unsigned long flags)
+{
+ const unsigned long mask = PDC_FLAG_GEN_II | PDC_FLAG_4_PORTS;
+ return (flags & mask) == mask;
+}
+
+static unsigned int pdc_port_no_to_ata_no(unsigned int port_no,
+ int is_sataii_tx4)
+{
+ static const unsigned char sataii_tx4_port_remap[4] = { 3, 1, 0, 2};
+ return is_sataii_tx4 ? sataii_tx4_port_remap[port_no] : port_no;
+}
+
+static unsigned int pdc_sata_nr_ports(const struct ata_port *ap)
+{
+ return (ap->flags & PDC_FLAG_4_PORTS) ? 4 : 2;
+}
+
+static unsigned int pdc_sata_ata_port_to_ata_no(const struct ata_port *ap)
+{
+ const struct ata_host *host = ap->host;
+ unsigned int nr_ports = pdc_sata_nr_ports(ap);
+ unsigned int i;
+
+ for(i = 0; i < nr_ports && host->ports[i] != ap; ++i)
+ ;
+ BUG_ON(i >= nr_ports);
+ return pdc_port_no_to_ata_no(i, pdc_is_sataii_tx4(ap->flags));
+}
+
+static unsigned int pdc_sata_hotplug_offset(const struct ata_port *ap)
+{
+ return (ap->flags & PDC_FLAG_GEN_II) ? PDC2_SATA_PLUG_CSR : PDC_SATA_PLUG_CSR;
+}
+
static void pdc_freeze(struct ata_port *ap)
{
void __iomem *mmio = ap->ioaddr.cmd_addr;
@@ -643,6 +680,29 @@ static void pdc_freeze(struct ata_port *ap)
readl(mmio + PDC_CTLSTAT); /* flush */
}
+static void pdc_sata_freeze(struct ata_port *ap)
+{
+ struct ata_host *host = ap->host;
+ void __iomem *host_mmio = host->iomap[PDC_MMIO_BAR];
+ unsigned int hotplug_offset = pdc_sata_hotplug_offset(ap);
+ unsigned int ata_no = pdc_sata_ata_port_to_ata_no(ap);
+ u32 hotplug_status;
+
+ /* Disable hotplug events on this port.
+ *
+ * Locking:
+ * 1) hotplug register accesses must be serialised via host->lock
+ * 2) ap->lock == &ap->host->lock
+ * 3) ->freeze() and ->thaw() are called with ap->lock held
+ */
+ hotplug_status = readl(host_mmio + hotplug_offset);
+ hotplug_status |= 0x11 << (ata_no + 16);
+ writel(hotplug_status, host_mmio + hotplug_offset);
+ readl(host_mmio + hotplug_offset); /* flush */
+
+ pdc_freeze(ap);
+}
+
static void pdc_thaw(struct ata_port *ap)
{
void __iomem *mmio = ap->ioaddr.cmd_addr;
@@ -658,6 +718,26 @@ static void pdc_thaw(struct ata_port *ap)
readl(mmio + PDC_CTLSTAT); /* flush */
}
+static void pdc_sata_thaw(struct ata_port *ap)
+{
+ struct ata_host *host = ap->host;
+ void __iomem *host_mmio = host->iomap[PDC_MMIO_BAR];
+ unsigned int hotplug_offset = pdc_sata_hotplug_offset(ap);
+ unsigned int ata_no = pdc_sata_ata_port_to_ata_no(ap);
+ u32 hotplug_status;
+
+ pdc_thaw(ap);
+
+ /* Enable hotplug events on this port.
+ * Locking: see pdc_sata_freeze().
+ */
+ hotplug_status = readl(host_mmio + hotplug_offset);
+ hotplug_status |= 0x11 << ata_no;
+ hotplug_status &= ~(0x11 << (ata_no + 16));
+ writel(hotplug_status, host_mmio + hotplug_offset);
+ readl(host_mmio + hotplug_offset); /* flush */
+}
+
static void pdc_common_error_handler(struct ata_port *ap, ata_reset_fn_t hardreset)
{
if (!(ap->pflags & ATA_PFLAG_FROZEN))
@@ -765,19 +845,6 @@ static void pdc_irq_clear(struct ata_port *ap)
readl(mmio + PDC_INT_SEQMASK);
}
-static int pdc_is_sataii_tx4(unsigned long flags)
-{
- const unsigned long mask = PDC_FLAG_GEN_II | PDC_FLAG_4_PORTS;
- return (flags & mask) == mask;
-}
-
-static unsigned int pdc_port_no_to_ata_no(unsigned int port_no,
- int is_sataii_tx4)
-{
- static const unsigned char sataii_tx4_port_remap[4] = { 3, 1, 0, 2};
- return is_sataii_tx4 ? sataii_tx4_port_remap[port_no] : port_no;
-}
-
static irqreturn_t pdc_interrupt(int irq, void *dev_instance)
{
struct ata_host *host = dev_instance;
@@ -799,6 +866,8 @@ static irqreturn_t pdc_interrupt(int irq, void *dev_instance)
mmio_base = host->iomap[PDC_MMIO_BAR];
+ spin_lock(&host->lock);
+
/* read and clear hotplug flags for all ports */
if (host->ports[0]->flags & PDC_FLAG_GEN_II)
hotplug_offset = PDC2_SATA_PLUG_CSR;
@@ -814,11 +883,9 @@ static irqreturn_t pdc_interrupt(int irq, void *dev_instance)
if (mask == 0xffffffff && hotplug_status == 0) {
VPRINTK("QUICK EXIT 2\n");
- return IRQ_NONE;
+ goto done_irq;
}
- spin_lock(&host->lock);
-
mask &= 0xffff; /* only 16 tags possible */
if (mask == 0 && hotplug_status == 0) {
VPRINTK("QUICK EXIT 3\n");
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 7de543d1d0b..24198ad0197 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -19,6 +19,7 @@
#include <linux/kdev_t.h>
#include <linux/notifier.h>
#include <linux/genhd.h>
+#include <linux/kallsyms.h>
#include <asm/semaphore.h>
#include "base.h"
@@ -68,6 +69,10 @@ static ssize_t dev_attr_show(struct kobject *kobj, struct attribute *attr,
if (dev_attr->show)
ret = dev_attr->show(dev, dev_attr, buf);
+ if (ret >= (ssize_t)PAGE_SIZE) {
+ print_symbol("dev_attr_show: %s returned bad count\n",
+ (unsigned long)dev_attr->show);
+ }
return ret;
}
diff --git a/drivers/base/driver.c b/drivers/base/driver.c
index bf31a0170a4..9a6537f1440 100644
--- a/drivers/base/driver.c
+++ b/drivers/base/driver.c
@@ -133,6 +133,7 @@ int driver_add_kobj(struct device_driver *drv, struct kobject *kobj,
{
va_list args;
char *name;
+ int ret;
va_start(args, fmt);
name = kvasprintf(GFP_KERNEL, fmt, args);
@@ -141,7 +142,9 @@ int driver_add_kobj(struct device_driver *drv, struct kobject *kobj,
if (!name)
return -ENOMEM;
- return kobject_add(kobj, &drv->p->kobj, "%s", name);
+ ret = kobject_add(kobj, &drv->p->kobj, "%s", name);
+ kfree(name);
+ return ret;
}
EXPORT_SYMBOL_GPL(driver_add_kobj);
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index b6d230b3209..0d1d2133d9b 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -44,16 +44,6 @@ config MAC_FLOPPY
If you have a SWIM-3 (Super Woz Integrated Machine 3; from Apple)
floppy controller, say Y here. Most commonly found in PowerMacs.
-config BLK_DEV_PS2
- tristate "PS/2 ESDI hard disk support"
- depends on MCA && MCA_LEGACY && BROKEN
- help
- Say Y here if you have a PS/2 machine with a MCA bus and an ESDI
- hard disk.
-
- To compile this driver as a module, choose M here: the
- module will be called ps2esdi.
-
config AMIGA_Z2RAM
tristate "Amiga Zorro II ramdisk support"
depends on ZORRO
diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index 01c972415cb..5e584306be9 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -13,7 +13,6 @@ obj-$(CONFIG_ATARI_FLOPPY) += ataflop.o
obj-$(CONFIG_AMIGA_Z2RAM) += z2ram.o
obj-$(CONFIG_BLK_DEV_RAM) += brd.o
obj-$(CONFIG_BLK_DEV_LOOP) += loop.o
-obj-$(CONFIG_BLK_DEV_PS2) += ps2esdi.o
obj-$(CONFIG_BLK_DEV_XD) += xd.o
obj-$(CONFIG_BLK_CPQ_DA) += cpqarray.o
obj-$(CONFIG_BLK_CPQ_CISS_DA) += cciss.o
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index b53fdb0a282..60cc54368b6 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -153,6 +153,12 @@ static int sock_xmit(struct nbd_device *lo, int send, void *buf, int size,
struct kvec iov;
sigset_t blocked, oldset;
+ if (unlikely(!sock)) {
+ printk(KERN_ERR "%s: Attempted %s on closed socket in sock_xmit\n",
+ lo->disk->disk_name, (send ? "send" : "recv"));
+ return -EINVAL;
+ }
+
/* Allow interception of SIGKILL only
* Don't allow other signals to interrupt the transmission */
siginitsetinv(&blocked, sigmask(SIGKILL));
diff --git a/drivers/block/ps2esdi.c b/drivers/block/ps2esdi.c
deleted file mode 100644
index 3c796e23625..00000000000
--- a/drivers/block/ps2esdi.c
+++ /dev/null
@@ -1,1079 +0,0 @@
-/* ps2esdi driver based on assembler code by Arindam Banerji,
- written by Peter De Schrijver */
-/* Reassuring note to IBM : This driver was NOT developed by vice-versa
- engineering the PS/2's BIOS */
-/* Dedicated to Wannes, Tofke, Ykke, Godot, Killroy and all those
- other lovely fish out there... */
-/* This code was written during the long and boring WINA
- elections 1994 */
-/* Thanks to Arindam Banerij for giving me the source of his driver */
-/* This code may be freely distributed and modified in any way,
- as long as these notes remain intact */
-
-/* Revised: 05/07/94 by Arindam Banerji (axb@cse.nd.edu) */
-/* Revised: 09/08/94 by Peter De Schrijver (stud11@cc4.kuleuven.ac.be)
- Thanks to Arindam Banerij for sending me the docs of the adapter */
-
-/* BA Modified for ThinkPad 720 by Boris Ashkinazi */
-/* (bash@vnet.ibm.com) 08/08/95 */
-
-/* Modified further for ThinkPad-720C by Uri Blumenthal */
-/* (uri@watson.ibm.com) Sep 11, 1995 */
-
-/* TODO :
- + Timeouts
- + Get disk parameters
- + DMA above 16MB
- + reset after read/write error
- */
-
-#define DEVICE_NAME "PS/2 ESDI"
-
-#include <linux/major.h>
-#include <linux/errno.h>
-#include <linux/wait.h>
-#include <linux/interrupt.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/genhd.h>
-#include <linux/ps2esdi.h>
-#include <linux/blkdev.h>
-#include <linux/mca-legacy.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/module.h>
-#include <linux/hdreg.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <asm/mca_dma.h>
-#include <asm/uaccess.h>
-
-#define PS2ESDI_IRQ 14
-#define MAX_HD 2
-#define MAX_RETRIES 5
-#define MAX_16BIT 65536
-#define ESDI_TIMEOUT 0xf000
-#define ESDI_STAT_TIMEOUT 4
-
-#define TYPE_0_CMD_BLK_LENGTH 2
-#define TYPE_1_CMD_BLK_LENGTH 4
-
-static void reset_ctrl(void);
-
-static int ps2esdi_geninit(void);
-
-static void do_ps2esdi_request(struct request_queue * q);
-
-static void ps2esdi_readwrite(int cmd, struct request *req);
-
-static void ps2esdi_fill_cmd_block(u_short * cmd_blk, u_short cmd,
-u_short cyl, u_short head, u_short sector, u_short length, u_char drive);
-
-static int ps2esdi_out_cmd_blk(u_short * cmd_blk);
-
-static void ps2esdi_prep_dma(char *buffer, u_short length, u_char dma_xmode);
-
-static irqreturn_t ps2esdi_interrupt_handler(int irq, void *dev_id);
-static void (*current_int_handler) (u_int) = NULL;
-static void ps2esdi_normal_interrupt_handler(u_int);
-static void ps2esdi_initial_reset_int_handler(u_int);
-static void ps2esdi_geometry_int_handler(u_int);
-static int ps2esdi_getgeo(struct block_device *bdev, struct hd_geometry *geo);
-
-static int ps2esdi_read_status_words(int num_words, int max_words, u_short * buffer);
-
-static void dump_cmd_complete_status(u_int int_ret_code);
-
-static void ps2esdi_get_device_cfg(void);
-
-static void ps2esdi_reset_timer(unsigned long unused);
-
-static u_int dma_arb_level; /* DMA arbitration level */
-
-static DECLARE_WAIT_QUEUE_HEAD(ps2esdi_int);
-
-static int no_int_yet;
-static int ps2esdi_drives;
-static u_short io_base;
-static DEFINE_TIMER(esdi_timer, ps2esdi_reset_timer, 0, 0);
-static int reset_status;
-static int ps2esdi_slot = -1;
-static int tp720esdi = 0; /* Is it Integrated ESDI of ThinkPad-720? */
-static int intg_esdi = 0; /* If integrated adapter */
-struct ps2esdi_i_struct {
- unsigned int head, sect, cyl, wpcom, lzone, ctl;
-};
-static DEFINE_SPINLOCK(ps2esdi_lock);
-static struct request_queue *ps2esdi_queue;
-static struct request *current_req;
-
-#if 0
-#if 0 /* try both - I don't know which one is better... UB */
-static struct ps2esdi_i_struct ps2esdi_info[MAX_HD] =
-{
- {4, 48, 1553, 0, 0, 0},
- {0, 0, 0, 0, 0, 0}};
-#else
-static struct ps2esdi_i_struct ps2esdi_info[MAX_HD] =
-{
- {64, 32, 161, 0, 0, 0},
- {0, 0, 0, 0, 0, 0}};
-#endif
-#endif
-static struct ps2esdi_i_struct ps2esdi_info[MAX_HD] =
-{
- {0, 0, 0, 0, 0, 0},
- {0, 0, 0, 0, 0, 0}};
-
-static struct block_device_operations ps2esdi_fops =
-{
- .owner = THIS_MODULE,
- .getgeo = ps2esdi_getgeo,
-};
-
-static struct gendisk *ps2esdi_gendisk[2];
-
-/* initialization routine called by ll_rw_blk.c */
-static int __init ps2esdi_init(void)
-{
-
- int error = 0;
-
- /* register the device - pass the name and major number */
- if (register_blkdev(PS2ESDI_MAJOR, "ed"))
- return -EBUSY;
-
- /* set up some global information - indicating device specific info */
- ps2esdi_queue = blk_init_queue(do_ps2esdi_request, &ps2esdi_lock);
- if (!ps2esdi_queue) {
- unregister_blkdev(PS2ESDI_MAJOR, "ed");
- return -ENOMEM;
- }
-
- /* some minor housekeeping - setup the global gendisk structure */
- error = ps2esdi_geninit();
- if (error) {
- printk(KERN_WARNING "PS2ESDI: error initialising"
- " device, releasing resources\n");
- unregister_blkdev(PS2ESDI_MAJOR, "ed");
- blk_cleanup_queue(ps2esdi_queue);
- return error;
- }
- return 0;
-} /* ps2esdi_init */
-
-#ifndef MODULE
-
-module_init(ps2esdi_init);
-
-#else
-
-static int cyl[MAX_HD] = {-1,-1};
-static int head[MAX_HD] = {-1, -1};
-static int sect[MAX_HD] = {-1, -1};
-
-module_param(tp720esdi, bool, 0);
-module_param_array(cyl, int, NULL, 0);
-module_param_array(head, int, NULL, 0);
-module_param_array(sect, int, NULL, 0);
-MODULE_LICENSE("GPL");
-
-int init_module(void) {
- int drive;
-
- for(drive = 0; drive < MAX_HD; drive++) {
- struct ps2esdi_i_struct *info = &ps2esdi_info[drive];
-
- if (cyl[drive] != -1) {
- info->cyl = info->lzone = cyl[drive];
- info->wpcom = 0;
- }
- if (head[drive] != -1) {
- info->head = head[drive];
- info->ctl = (head[drive] > 8 ? 8 : 0);
- }
- if (sect[drive] != -1) info->sect = sect[drive];
- }
- return ps2esdi_init();
-}
-
-void
-cleanup_module(void) {
- int i;
- if(ps2esdi_slot) {
- mca_mark_as_unused(ps2esdi_slot);
- mca_set_adapter_procfn(ps2esdi_slot, NULL, NULL);
- }
- release_region(io_base, 4);
- free_dma(dma_arb_level);
- free_irq(PS2ESDI_IRQ, &ps2esdi_gendisk);
- unregister_blkdev(PS2ESDI_MAJOR, "ed");
- blk_cleanup_queue(ps2esdi_queue);
- for (i = 0; i < ps2esdi_drives; i++) {
- del_gendisk(ps2esdi_gendisk[i]);
- put_disk(ps2esdi_gendisk[i]);
- }
-}
-#endif /* MODULE */
-
-/* handles boot time command line parameters */
-void __init tp720_setup(char *str, int *ints)
-{
- /* no params, just sets the tp720esdi flag if it exists */
-
- printk("%s: TP 720 ESDI flag set\n", DEVICE_NAME);
- tp720esdi = 1;
-}
-
-void __init ed_setup(char *str, int *ints)
-{
- int hdind = 0;
-
- /* handles 3 parameters only - corresponding to
- 1. Number of cylinders
- 2. Number of heads
- 3. Sectors/track
- */
-
- if (ints[0] != 3)
- return;
-
- /* print out the information - seen at boot time */
- printk("%s: ints[0]=%d ints[1]=%d ints[2]=%d ints[3]=%d\n",
- DEVICE_NAME, ints[0], ints[1], ints[2], ints[3]);
-
- /* set the index into device specific information table */
- if (ps2esdi_info[0].head != 0)
- hdind = 1;
-
- /* set up all the device information */
- ps2esdi_info[hdind].head = ints[2];
- ps2esdi_info[hdind].sect = ints[3];
- ps2esdi_info[hdind].cyl = ints[1];
- ps2esdi_info[hdind].wpcom = 0;
- ps2esdi_info[hdind].lzone = ints[1];
- ps2esdi_info[hdind].ctl = (ints[2] > 8 ? 8 : 0);
-#if 0 /* this may be needed for PS2/Mod.80, but it hurts ThinkPad! */
- ps2esdi_drives = hdind + 1; /* increment index for the next time */
-#endif
-} /* ed_setup */
-
-static int ps2esdi_getinfo(char *buf, int slot, void *d)
-{
- int len = 0;
-
- len += sprintf(buf + len, "DMA Arbitration Level: %d\n",
- dma_arb_level);
- len += sprintf(buf + len, "IO Port: %x\n", io_base);
- len += sprintf(buf + len, "IRQ: 14\n");
- len += sprintf(buf + len, "Drives: %d\n", ps2esdi_drives);
-
- return len;
-}
-
-/* ps2 esdi specific initialization - called thru the gendisk chain */
-static int __init ps2esdi_geninit(void)
-{
- /*
- The first part contains the initialization code
- for the ESDI disk subsystem. All we really do
- is search for the POS registers of the controller
- to do some simple setup operations. First, we
- must ensure that the controller is installed,
- enabled, and configured as PRIMARY. Then we must
- determine the DMA arbitration level being used by
- the controller so we can handle data transfer
- operations properly. If all of this works, then
- we will set the INIT_FLAG to a non-zero value.
- */
-
- int slot = 0, i, reset_start, reset_end;
- u_char status;
- unsigned short adapterID;
- int error = 0;
-
- if ((slot = mca_find_adapter(INTG_ESDI_ID, 0)) != MCA_NOTFOUND) {
- adapterID = INTG_ESDI_ID;
- printk("%s: integrated ESDI adapter found in slot %d\n",
- DEVICE_NAME, slot+1);
-#ifndef MODULE
- mca_set_adapter_name(slot, "PS/2 Integrated ESDI");
-#endif
- } else if ((slot = mca_find_adapter(NRML_ESDI_ID, 0)) != -1) {
- adapterID = NRML_ESDI_ID;
- printk("%s: normal ESDI adapter found in slot %d\n",
- DEVICE_NAME, slot+1);
- mca_set_adapter_name(slot, "PS/2 ESDI");
- } else {
- return -ENODEV;
- }
-
- ps2esdi_slot = slot;
- mca_mark_as_used(slot);
- mca_set_adapter_procfn(slot, (MCA_ProcFn) ps2esdi_getinfo, NULL);
-
- /* Found the slot - read the POS register 2 to get the necessary
- configuration and status information. POS register 2 has the
- following information :
- Bit Function
- 7 reserved = 0
- 6 arbitration method
- 0 - fairness enabled
- 1 - fairness disabled, linear priority assignment
- 5-2 arbitration level
- 1 alternate address
- 1 alternate address
- 0 - use addresses 0x3510 - 0x3517
- 0 adapter enable
- */
-
- status = mca_read_stored_pos(slot, 2);
- /* is it enabled ? */
- if (!(status & STATUS_ENABLED)) {
- printk("%s: ESDI adapter disabled\n", DEVICE_NAME);
- error = -ENODEV;
- goto err_out1;
- }
- /* try to grab IRQ, and try to grab a slow IRQ if it fails, so we can
- share with the SCSI driver */
- if (request_irq(PS2ESDI_IRQ, ps2esdi_interrupt_handler,
- IRQF_DISABLED | IRQF_SHARED, "PS/2 ESDI", &ps2esdi_gendisk)
- && request_irq(PS2ESDI_IRQ, ps2esdi_interrupt_handler,
- IRQF_SHARED, "PS/2 ESDI", &ps2esdi_gendisk)
- ) {
- printk("%s: Unable to get IRQ %d\n", DEVICE_NAME, PS2ESDI_IRQ);
- error = -EBUSY;
- goto err_out1;
- }
- if (status & STATUS_ALTERNATE)
- io_base = ALT_IO_BASE;
- else
- io_base = PRIMARY_IO_BASE;
-
- if (!request_region(io_base, 4, "ed")) {
- printk(KERN_WARNING"Unable to request region 0x%x\n", io_base);
- error = -EBUSY;
- goto err_out2;
- }
- /* get the dma arbitration level */
- dma_arb_level = (status >> 2) & 0xf;
-
- /* BA */
- printk("%s: DMA arbitration level : %d\n",
- DEVICE_NAME, dma_arb_level);
-
- LITE_ON;
- current_int_handler = ps2esdi_initial_reset_int_handler;
- reset_ctrl();
- reset_status = 0;
- reset_start = jiffies;
- while (!reset_status) {
- init_timer(&esdi_timer);
- esdi_timer.expires = jiffies + HZ;
- esdi_timer.data = 0;
- add_timer(&esdi_timer);
- sleep_on(&ps2esdi_int);
- }
- reset_end = jiffies;
- LITE_OFF;
- printk("%s: reset interrupt after %d jiffies, %u.%02u secs\n",
- DEVICE_NAME, reset_end - reset_start, (reset_end - reset_start) / HZ,
- (reset_end - reset_start) % HZ);
-
-
- /* Integrated ESDI Disk and Controller has only one drive! */
- if (adapterID == INTG_ESDI_ID) {/* if not "normal" PS2 ESDI adapter */
- ps2esdi_drives = 1; /* then we have only one physical disk! */ intg_esdi = 1;
- }
-
-
-
- /* finally this part sets up some global data structures etc. */
-
- ps2esdi_get_device_cfg();
-
- /* some annoyance in the above routine returns TWO drives?
- Is something else happining in the background?
- Regaurdless we fix the # of drives again. AJK */
- /* Integrated ESDI Disk and Controller has only one drive! */
- if (adapterID == INTG_ESDI_ID) /* if not "normal" PS2 ESDI adapter */
- ps2esdi_drives = 1; /* Not three or two, ONE DAMNIT! */
-
- current_int_handler = ps2esdi_normal_interrupt_handler;
-
- if (request_dma(dma_arb_level, "ed") !=0) {
- printk(KERN_WARNING "PS2ESDI: Can't request dma-channel %d\n"
- ,(int) dma_arb_level);
- error = -EBUSY;
- goto err_out3;
- }
- blk_queue_max_sectors(ps2esdi_queue, 128);
-
- error = -ENOMEM;
- for (i = 0; i < ps2esdi_drives; i++) {
- struct gendisk *disk = alloc_disk(64);
- if (!disk)
- goto err_out4;
- disk->major = PS2ESDI_MAJOR;
- disk->first_minor = i<<6;
- sprintf(disk->disk_name, "ed%c", 'a'+i);
- disk->fops = &ps2esdi_fops;
- ps2esdi_gendisk[i] = disk;
- }
-
- for (i = 0; i < ps2esdi_drives; i++) {
- struct gendisk *disk = ps2esdi_gendisk[i];
- set_capacity(disk, ps2esdi_info[i].head * ps2esdi_info[i].sect *
- ps2esdi_info[i].cyl);
- disk->queue = ps2esdi_queue;
- disk->private_data = &ps2esdi_info[i];
- add_disk(disk);
- }
- return 0;
-err_out4:
- while (i--)
- put_disk(ps2esdi_gendisk[i]);
-err_out3:
- release_region(io_base, 4);
-err_out2:
- free_irq(PS2ESDI_IRQ, &ps2esdi_gendisk);
-err_out1:
- if(ps2esdi_slot) {
- mca_mark_as_unused(ps2esdi_slot);
- mca_set_adapter_procfn(ps2esdi_slot, NULL, NULL);
- }
- return error;
-}
-
-static void __init ps2esdi_get_device_cfg(void)
-{
- u_short cmd_blk[TYPE_0_CMD_BLK_LENGTH];
-
- /*BA */ printk("%s: Drive 0\n", DEVICE_NAME);
- current_int_handler = ps2esdi_geometry_int_handler;
- cmd_blk[0] = CMD_GET_DEV_CONFIG | 0x600;
- cmd_blk[1] = 0;
- no_int_yet = TRUE;
- ps2esdi_out_cmd_blk(cmd_blk);
- if (no_int_yet)
- sleep_on(&ps2esdi_int);
-
- if (ps2esdi_drives > 1) {
- printk("%s: Drive 1\n", DEVICE_NAME); /*BA */
- cmd_blk[0] = CMD_GET_DEV_CONFIG | (1 << 5) | 0x600;
- cmd_blk[1] = 0;
- no_int_yet = TRUE;
- ps2esdi_out_cmd_blk(cmd_blk);
- if (no_int_yet)
- sleep_on(&ps2esdi_int);
- } /* if second physical drive is present */
- return;
-}
-
-/* strategy routine that handles most of the IO requests */
-static void do_ps2esdi_request(struct request_queue * q)
-{
- struct request *req;
- /* since, this routine is called with interrupts cleared - they
- must be before it finishes */
-
- req = elv_next_request(q);
- if (!req)
- return;
-
-#if 0
- printk("%s:got request. device : %s command : %d sector : %ld count : %ld, buffer: %p\n",
- DEVICE_NAME,
- req->rq_disk->disk_name,
- req->cmd, req->sector,
- req->current_nr_sectors, req->buffer);
-#endif
-
- /* check for above 16Mb dmas */
- if (isa_virt_to_bus(req->buffer + req->current_nr_sectors * 512) > 16 * MB) {
- printk("%s: DMA above 16MB not supported\n", DEVICE_NAME);
- end_request(req, FAIL);
- return;
- }
-
- if (req->sector+req->current_nr_sectors > get_capacity(req->rq_disk)) {
- printk("Grrr. error. ps2esdi_drives: %d, %llu %llu\n",
- ps2esdi_drives, req->sector,
- (unsigned long long)get_capacity(req->rq_disk));
- end_request(req, FAIL);
- return;
- }
-
- switch (rq_data_dir(req)) {
- case READ:
- ps2esdi_readwrite(READ, req);
- break;
- case WRITE:
- ps2esdi_readwrite(WRITE, req);
- break;
- default:
- printk("%s: Unknown command\n", req->rq_disk->disk_name);
- end_request(req, FAIL);
- break;
- } /* handle different commands */
-} /* main strategy routine */
-
-/* resets the ESDI adapter */
-static void reset_ctrl(void)
-{
-
- u_long expire;
- u_short status;
-
- /* enable interrupts on the controller */
- status = inb(ESDI_INTRPT);
- outb((status & 0xe0) | ATT_EOI, ESDI_ATTN); /* to be sure we don't have
- any interrupt pending... */
- outb_p(CTRL_ENABLE_INTR, ESDI_CONTROL);
-
- /* read the ESDI status port - if the controller is not busy,
- simply do a soft reset (fast) - otherwise we'll have to do a
- hard (slow) reset. */
- if (!(inb_p(ESDI_STATUS) & STATUS_BUSY)) {
- /*BA */ printk("%s: soft reset...\n", DEVICE_NAME);
- outb_p(CTRL_SOFT_RESET, ESDI_ATTN);
- }
- /* soft reset */
- else {
- /*BA */
- printk("%s: hard reset...\n", DEVICE_NAME);
- outb_p(CTRL_HARD_RESET, ESDI_CONTROL);
- expire = jiffies + 2*HZ;
- while (time_before(jiffies, expire));
- outb_p(1, ESDI_CONTROL);
- } /* hard reset */
-
-
-} /* reset the controller */
-
-/* called by the strategy routine to handle read and write requests */
-static void ps2esdi_readwrite(int cmd, struct request *req)
-{
- struct ps2esdi_i_struct *p = req->rq_disk->private_data;
- unsigned block = req->sector;
- unsigned count = req->current_nr_sectors;
- int drive = p - ps2esdi_info;
- u_short track, head, cylinder, sector;
- u_short cmd_blk[TYPE_1_CMD_BLK_LENGTH];
-
- /* do some relevant arithmatic */
- track = block / p->sect;
- head = track % p->head;
- cylinder = track / p->head;
- sector = block % p->sect;
-
-#if 0
- printk("%s: cyl=%d head=%d sect=%d\n", DEVICE_NAME, cylinder, head, sector);
-#endif
- /* call the routine that actually fills out a command block */
- ps2esdi_fill_cmd_block
- (cmd_blk,
- (cmd == READ) ? CMD_READ : CMD_WRITE,
- cylinder, head, sector, count, drive);
-
- /* send the command block to the controller */
- current_req = req;
- spin_unlock_irq(&ps2esdi_lock);
- if (ps2esdi_out_cmd_blk(cmd_blk)) {
- spin_lock_irq(&ps2esdi_lock);
- printk("%s: Controller failed\n", DEVICE_NAME);
- if ((++req->errors) >= MAX_RETRIES)
- end_request(req, FAIL);
- }
- /* check for failure to put out the command block */
- else {
- spin_lock_irq(&ps2esdi_lock);
-#if 0
- printk("%s: waiting for xfer\n", DEVICE_NAME);
-#endif
- /* turn disk lights on */
- LITE_ON;
- }
-
-} /* ps2esdi_readwrite */
-
-/* fill out the command block */
-static void ps2esdi_fill_cmd_block(u_short * cmd_blk, u_short cmd,
- u_short cyl, u_short head, u_short sector, u_short length, u_char drive)
-{
-
- cmd_blk[0] = (drive << 5) | cmd;
- cmd_blk[1] = length;
- cmd_blk[2] = ((cyl & 0x1f) << 11) | (head << 5) | sector;
- cmd_blk[3] = (cyl & 0x3E0) >> 5;
-
-} /* fill out the command block */
-
-/* write a command block to the controller */
-static int ps2esdi_out_cmd_blk(u_short * cmd_blk)
-{
-
- int i;
- unsigned long jif;
- u_char status;
-
- /* enable interrupts */
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
-
- /* do not write to the controller, if it is busy */
- for (jif = jiffies + ESDI_STAT_TIMEOUT;
- time_after(jif, jiffies) &&
- (inb(ESDI_STATUS) & STATUS_BUSY); )
- ;
-
-#if 0
- printk("%s: i(1)=%ld\n", DEVICE_NAME, jif);
-#endif
-
- /* if device is still busy - then just time out */
- if (inb(ESDI_STATUS) & STATUS_BUSY) {
- printk("%s: ps2esdi_out_cmd timed out (1)\n", DEVICE_NAME);
- return ERROR;
- } /* timeout ??? */
- /* Set up the attention register in the controller */
- outb(((*cmd_blk) & 0xE0) | 1, ESDI_ATTN);
-
-#if 0
- printk("%s: sending %d words to controller\n", DEVICE_NAME, (((*cmd_blk) >> 14) + 1) << 1);
-#endif
-
- /* one by one send each word out */
- for (i = (((*cmd_blk) >> 14) + 1) << 1; i; i--) {
- status = inb(ESDI_STATUS);
- for (jif = jiffies + ESDI_STAT_TIMEOUT;
- time_after(jif, jiffies) && (status & STATUS_BUSY) &&
- (status & STATUS_CMD_INF); status = inb(ESDI_STATUS));
- if ((status & (STATUS_BUSY | STATUS_CMD_INF)) == STATUS_BUSY) {
-#if 0
- printk("%s: sending %04X\n", DEVICE_NAME, *cmd_blk);
-#endif
- outw(*cmd_blk++, ESDI_CMD_INT);
- } else {
- printk("%s: ps2esdi_out_cmd timed out while sending command (status=%02X)\n",
- DEVICE_NAME, status);
- return ERROR;
- }
- } /* send all words out */
- return OK;
-} /* send out the commands */
-
-
-/* prepare for dma - do all the necessary setup */
-static void ps2esdi_prep_dma(char *buffer, u_short length, u_char dma_xmode)
-{
- unsigned long flags = claim_dma_lock();
-
- mca_disable_dma(dma_arb_level);
-
- mca_set_dma_addr(dma_arb_level, isa_virt_to_bus(buffer));
-
- mca_set_dma_count(dma_arb_level, length * 512 / 2);
-
- mca_set_dma_mode(dma_arb_level, dma_xmode);
-
- mca_enable_dma(dma_arb_level);
-
- release_dma_lock(flags);
-
-} /* prepare for dma */
-
-
-
-static irqreturn_t ps2esdi_interrupt_handler(int irq, void *dev_id)
-{
- u_int int_ret_code;
-
- if (inb(ESDI_STATUS) & STATUS_INTR) {
- int_ret_code = inb(ESDI_INTRPT);
- if (current_int_handler) {
- /* Disable adapter interrupts till processing is finished */
- outb(CTRL_DISABLE_INTR, ESDI_CONTROL);
- current_int_handler(int_ret_code);
- } else
- printk("%s: help ! No interrupt handler.\n", DEVICE_NAME);
- } else {
- return IRQ_NONE;
- }
- return IRQ_HANDLED;
-}
-
-static void ps2esdi_initial_reset_int_handler(u_int int_ret_code)
-{
-
- switch (int_ret_code & 0xf) {
- case INT_RESET:
- /*BA */
- printk("%s: initial reset completed.\n", DEVICE_NAME);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- wake_up(&ps2esdi_int);
- break;
- case INT_ATTN_ERROR:
- printk("%s: Attention error. interrupt status : %02X\n", DEVICE_NAME,
- int_ret_code);
- printk("%s: status: %02x\n", DEVICE_NAME, inb(ESDI_STATUS));
- break;
- default:
- printk("%s: initial reset handler received interrupt: %02X\n",
- DEVICE_NAME, int_ret_code);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- break;
- }
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
-}
-
-
-static void ps2esdi_geometry_int_handler(u_int int_ret_code)
-{
- u_int status, drive_num;
- unsigned long rba;
- int i;
-
- drive_num = int_ret_code >> 5;
- switch (int_ret_code & 0xf) {
- case INT_CMD_COMPLETE:
- for (i = ESDI_TIMEOUT; i && !(inb(ESDI_STATUS) & STATUS_STAT_AVAIL); i--);
- if (!(inb(ESDI_STATUS) & STATUS_STAT_AVAIL)) {
- printk("%s: timeout reading status word\n", DEVICE_NAME);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- break;
- }
- status = inw(ESDI_STT_INT);
- if ((status & 0x1F) == CMD_GET_DEV_CONFIG) {
-#define REPLY_WORDS 5 /* we already read word 0 */
- u_short reply[REPLY_WORDS];
-
- if (ps2esdi_read_status_words((status >> 8) - 1, REPLY_WORDS, reply)) {
- /*BA */
- printk("%s: Device Configuration Status for drive %u\n",
- DEVICE_NAME, drive_num);
-
- printk("%s: Spares/cyls: %u", DEVICE_NAME, reply[0] >> 8);
-
- printk
- ("Config bits: %s%s%s%s%s\n",
- (reply[0] & CONFIG_IS) ? "Invalid Secondary, " : "",
- ((reply[0] & CONFIG_ZD) && !(reply[0] & CONFIG_IS))
- ? "Zero Defect, " : "Defects Present, ",
- (reply[0] & CONFIG_SF) ? "Skewed Format, " : "",
- (reply[0] & CONFIG_FR) ? "Removable, " : "Non-Removable, ",
- (reply[0] & CONFIG_RT) ? "No Retries" : "Retries");
-
- rba = reply[1] | ((unsigned long) reply[2] << 16);
- printk("%s: Number of RBA's: %lu\n", DEVICE_NAME, rba);
-
- printk("%s: Physical number of cylinders: %u, Sectors/Track: %u, Heads: %u\n",
- DEVICE_NAME, reply[3], reply[4] >> 8, reply[4] & 0xff);
-
- if (!ps2esdi_info[drive_num].head) {
- ps2esdi_info[drive_num].head = 64;
- ps2esdi_info[drive_num].sect = 32;
- ps2esdi_info[drive_num].cyl = rba / (64 * 32);
- ps2esdi_info[drive_num].wpcom = 0;
- ps2esdi_info[drive_num].lzone = ps2esdi_info[drive_num].cyl;
- ps2esdi_info[drive_num].ctl = 8;
- if (tp720esdi) { /* store the retrieved parameters */
- ps2esdi_info[0].head = reply[4] & 0Xff;
- ps2esdi_info[0].sect = reply[4] >> 8;
- ps2esdi_info[0].cyl = reply[3];
- ps2esdi_info[0].wpcom = 0;
- ps2esdi_info[0].lzone = reply[3];
- } else {
- if (!intg_esdi)
- ps2esdi_drives++;
- }
- }
-#ifdef OBSOLETE
- if (!ps2esdi_info[drive_num].head) {
- ps2esdi_info[drive_num].head = reply[4] & 0Xff;
- ps2esdi_info[drive_num].sect = reply[4] >> 8;
- ps2esdi_info[drive_num].cyl = reply[3];
- ps2esdi_info[drive_num].wpcom = 0;
- ps2esdi_info[drive_num].lzone = reply[3];
- if (tp720esdi) { /* store the retrieved parameters */
- ps2esdi_info[0].head = reply[4] & 0Xff;
- ps2esdi_info[0].sect = reply[4] >> 8;
- ps2esdi_info[0].cyl = reply[3];
- ps2esdi_info[0].wpcom = 0;
- ps2esdi_info[0].lzone = reply[3];
- } else {
- ps2esdi_drives++;
- }
- }
-#endif
-
- } else
- printk("%s: failed while getting device config\n", DEVICE_NAME);
-#undef REPLY_WORDS
- } else
- printk("%s: command %02X unknown by geometry handler\n",
- DEVICE_NAME, status & 0x1f);
-
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- break;
-
- case INT_ATTN_ERROR:
- printk("%s: Attention error. interrupt status : %02X\n", DEVICE_NAME,
- int_ret_code);
- printk("%s: Device not available\n", DEVICE_NAME);
- break;
- case INT_CMD_ECC:
- case INT_CMD_RETRY:
- case INT_CMD_ECC_RETRY:
- case INT_CMD_WARNING:
- case INT_CMD_ABORT:
- case INT_CMD_FAILED:
- case INT_DMA_ERR:
- case INT_CMD_BLK_ERR:
- /*BA */ printk("%s: Whaa. Error occurred...\n", DEVICE_NAME);
- dump_cmd_complete_status(int_ret_code);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- break;
- default:
- printk("%s: Unknown interrupt reason: %02X\n",
- DEVICE_NAME, int_ret_code & 0xf);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- break;
- }
-
- wake_up(&ps2esdi_int);
- no_int_yet = FALSE;
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
-
-}
-
-static void ps2esdi_normal_interrupt_handler(u_int int_ret_code)
-{
- unsigned long flags;
- u_int status;
- u_int ending;
- int i;
-
- switch (int_ret_code & 0x0f) {
- case INT_TRANSFER_REQ:
- ps2esdi_prep_dma(current_req->buffer,
- current_req->current_nr_sectors,
- (rq_data_dir(current_req) == READ)
- ? MCA_DMA_MODE_16 | MCA_DMA_MODE_WRITE | MCA_DMA_MODE_XFER
- : MCA_DMA_MODE_16 | MCA_DMA_MODE_READ);
- outb(CTRL_ENABLE_DMA | CTRL_ENABLE_INTR, ESDI_CONTROL);
- ending = -1;
- break;
-
- case INT_ATTN_ERROR:
- printk("%s: Attention error. interrupt status : %02X\n", DEVICE_NAME,
- int_ret_code);
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
- ending = FAIL;
- break;
-
- case INT_CMD_COMPLETE:
- for (i = ESDI_TIMEOUT; i && !(inb(ESDI_STATUS) & STATUS_STAT_AVAIL); i--);
- if (!(inb(ESDI_STATUS) & STATUS_STAT_AVAIL)) {
- printk("%s: timeout reading status word\n", DEVICE_NAME);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
- if ((++current_req->errors) >= MAX_RETRIES)
- ending = FAIL;
- else
- ending = -1;
- break;
- }
- status = inw(ESDI_STT_INT);
- switch (status & 0x1F) {
- case (CMD_READ & 0xff):
- case (CMD_WRITE & 0xff):
- LITE_OFF;
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
- ending = SUCCES;
- break;
- default:
- printk("%s: interrupt for unknown command %02X\n",
- DEVICE_NAME, status & 0x1f);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
- ending = -1;
- break;
- }
- break;
- case INT_CMD_ECC:
- case INT_CMD_RETRY:
- case INT_CMD_ECC_RETRY:
- LITE_OFF;
- dump_cmd_complete_status(int_ret_code);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
- ending = SUCCES;
- break;
- case INT_CMD_WARNING:
- case INT_CMD_ABORT:
- case INT_CMD_FAILED:
- case INT_DMA_ERR:
- LITE_OFF;
- dump_cmd_complete_status(int_ret_code);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
- if ((++current_req->errors) >= MAX_RETRIES)
- ending = FAIL;
- else
- ending = -1;
- break;
-
- case INT_CMD_BLK_ERR:
- dump_cmd_complete_status(int_ret_code);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
- ending = FAIL;
- break;
-
- case INT_CMD_FORMAT:
- printk("%s: huh ? Who issued this format command ?\n"
- ,DEVICE_NAME);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
- ending = -1;
- break;
-
- case INT_RESET:
- /* BA printk("%s: reset completed.\n", DEVICE_NAME) */ ;
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
- ending = -1;
- break;
-
- default:
- printk("%s: Unknown interrupt reason: %02X\n",
- DEVICE_NAME, int_ret_code & 0xf);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
- ending = -1;
- break;
- }
- if(ending != -1) {
- spin_lock_irqsave(&ps2esdi_lock, flags);
- end_request(current_req, ending);
- current_req = NULL;
- do_ps2esdi_request(ps2esdi_queue);
- spin_unlock_irqrestore(&ps2esdi_lock, flags);
- }
-} /* handle interrupts */
-
-
-
-static int ps2esdi_read_status_words(int num_words,
- int max_words,
- u_short * buffer)
-{
- int i;
-
- for (; max_words && num_words; max_words--, num_words--, buffer++) {
- for (i = ESDI_TIMEOUT; i && !(inb(ESDI_STATUS) & STATUS_STAT_AVAIL); i--);
- if (!(inb(ESDI_STATUS) & STATUS_STAT_AVAIL)) {
- printk("%s: timeout reading status word\n", DEVICE_NAME);
- return FAIL;
- }
- *buffer = inw(ESDI_STT_INT);
- }
- return SUCCES;
-}
-
-
-
-
-static void dump_cmd_complete_status(u_int int_ret_code)
-{
-#define WAIT_FOR_STATUS \
- for(i=ESDI_TIMEOUT;i && !(inb(ESDI_STATUS) & STATUS_STAT_AVAIL);i--); \
- if(!(inb(ESDI_STATUS) & STATUS_STAT_AVAIL)) { \
- printk("%s: timeout reading status word\n",DEVICE_NAME); \
- return; \
- }
-
- int i, word_count;
- u_short stat_word;
- u_long rba;
-
- printk("%s: Device: %u, interrupt ID: %02X\n",
- DEVICE_NAME, int_ret_code >> 5,
- int_ret_code & 0xf);
-
- WAIT_FOR_STATUS;
- stat_word = inw(ESDI_STT_INT);
- word_count = (stat_word >> 8) - 1;
- printk("%s: %u status words, command: %02X\n", DEVICE_NAME, word_count,
- stat_word & 0xff);
-
- if (word_count--) {
- WAIT_FOR_STATUS;
- stat_word = inw(ESDI_STT_INT);
- printk("%s: command status code: %02X, command error code: %02X\n",
- DEVICE_NAME, stat_word >> 8, stat_word & 0xff);
- }
- if (word_count--) {
- WAIT_FOR_STATUS;
- stat_word = inw(ESDI_STT_INT);
- printk("%s: device error code: %s%s%s%s%s,%02X\n", DEVICE_NAME,
- (stat_word & 0x1000) ? "Ready, " : "Not Ready, ",
- (stat_word & 0x0800) ? "Selected, " : "Not Selected, ",
- (stat_word & 0x0400) ? "Write Fault, " : "",
- (stat_word & 0x0200) ? "Track 0, " : "",
- (stat_word & 0x0100) ? "Seek or command complete, " : "",
- stat_word >> 8);
- }
- if (word_count--) {
- WAIT_FOR_STATUS;
- stat_word = inw(ESDI_STT_INT);
- printk("%s: Blocks to do: %u", DEVICE_NAME, stat_word);
- }
- if (word_count -= 2) {
- WAIT_FOR_STATUS;
- rba = inw(ESDI_STT_INT);
- WAIT_FOR_STATUS;
- rba |= inw(ESDI_STT_INT) << 16;
- printk(", Last Cyl: %u Head: %u Sector: %u\n",
- (u_short) ((rba & 0x1ff80000) >> 11),
- (u_short) ((rba & 0x7E0) >> 5), (u_short) (rba & 0x1f));
- } else
- printk("\n");
-
- if (word_count--) {
- WAIT_FOR_STATUS;
- stat_word = inw(ESDI_STT_INT);
- printk("%s: Blocks required ECC: %u", DEVICE_NAME, stat_word);
- }
- printk("\n");
-
-#undef WAIT_FOR_STATUS
-
-}
-
-static int ps2esdi_getgeo(struct block_device *bdev, struct hd_geometry *geo)
-{
- struct ps2esdi_i_struct *p = bdev->bd_disk->private_data;
-
- geo->heads = p->head;
- geo->sectors = p->sect;
- geo->cylinders = p->cyl;
- return 0;
-}
-
-static void ps2esdi_reset_timer(unsigned long unused)
-{
-
- int status;
-
- status = inb(ESDI_INTRPT);
- if ((status & 0xf) == INT_RESET) {
- outb((status & 0xe0) | ATT_EOI, ESDI_ATTN);
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
- reset_status = 1;
- }
- wake_up(&ps2esdi_int);
-}
diff --git a/drivers/char/drm/ati_pcigart.c b/drivers/char/drm/ati_pcigart.c
index d352dbb4ccf..141f4dfa0a1 100644
--- a/drivers/char/drm/ati_pcigart.c
+++ b/drivers/char/drm/ati_pcigart.c
@@ -35,42 +35,23 @@
# define ATI_PCIGART_PAGE_SIZE 4096 /**< PCI GART page size */
-static void *drm_ati_alloc_pcigart_table(int order)
+static int drm_ati_alloc_pcigart_table(struct drm_device *dev,
+ struct drm_ati_pcigart_info *gart_info)
{
- unsigned long address;
- struct page *page;
- int i;
-
- DRM_DEBUG("%d order\n", order);
-
- address = __get_free_pages(GFP_KERNEL | __GFP_COMP,
- order);
- if (address == 0UL) {
- return NULL;
- }
-
- page = virt_to_page(address);
-
- for (i = 0; i < order; i++, page++)
- SetPageReserved(page);
+ gart_info->table_handle = drm_pci_alloc(dev, gart_info->table_size,
+ PAGE_SIZE,
+ gart_info->table_mask);
+ if (gart_info->table_handle == NULL)
+ return -ENOMEM;
- DRM_DEBUG("returning 0x%08lx\n", address);
- return (void *)address;
+ return 0;
}
-static void drm_ati_free_pcigart_table(void *address, int order)
+static void drm_ati_free_pcigart_table(struct drm_device *dev,
+ struct drm_ati_pcigart_info *gart_info)
{
- struct page *page;
- int i;
- int num_pages = 1 << order;
- DRM_DEBUG("\n");
-
- page = virt_to_page((unsigned long)address);
-
- for (i = 0; i < num_pages; i++, page++)
- ClearPageReserved(page);
-
- free_pages((unsigned long)address, order);
+ drm_pci_free(dev, gart_info->table_handle);
+ gart_info->table_handle = NULL;
}
int drm_ati_pcigart_cleanup(struct drm_device *dev, struct drm_ati_pcigart_info *gart_info)
@@ -78,8 +59,7 @@ int drm_ati_pcigart_cleanup(struct drm_device *dev, struct drm_ati_pcigart_info
struct drm_sg_mem *entry = dev->sg;
unsigned long pages;
int i;
- int order;
- int num_pages, max_pages;
+ int max_pages;
/* we need to support large memory configurations */
if (!entry) {
@@ -87,15 +67,7 @@ int drm_ati_pcigart_cleanup(struct drm_device *dev, struct drm_ati_pcigart_info
return 0;
}
- order = drm_order((gart_info->table_size + (PAGE_SIZE-1)) / PAGE_SIZE);
- num_pages = 1 << order;
-
if (gart_info->bus_addr) {
- if (gart_info->gart_table_location == DRM_ATI_GART_MAIN) {
- pci_unmap_single(dev->pdev, gart_info->bus_addr,
- num_pages * PAGE_SIZE,
- PCI_DMA_TODEVICE);
- }
max_pages = (gart_info->table_size / sizeof(u32));
pages = (entry->pages <= max_pages)
@@ -112,10 +84,9 @@ int drm_ati_pcigart_cleanup(struct drm_device *dev, struct drm_ati_pcigart_info
gart_info->bus_addr = 0;
}
- if (gart_info->gart_table_location == DRM_ATI_GART_MAIN
- && gart_info->addr) {
- drm_ati_free_pcigart_table(gart_info->addr, order);
- gart_info->addr = NULL;
+ if (gart_info->gart_table_location == DRM_ATI_GART_MAIN &&
+ gart_info->table_handle) {
+ drm_ati_free_pcigart_table(dev, gart_info);
}
return 1;
@@ -127,11 +98,10 @@ int drm_ati_pcigart_init(struct drm_device *dev, struct drm_ati_pcigart_info *ga
struct drm_sg_mem *entry = dev->sg;
void *address = NULL;
unsigned long pages;
- u32 *pci_gart, page_base, bus_address = 0;
+ u32 *pci_gart, page_base;
+ dma_addr_t bus_address = 0;
int i, j, ret = 0;
- int order;
int max_pages;
- int num_pages;
if (!entry) {
DRM_ERROR("no scatter/gather memory!\n");
@@ -141,36 +111,20 @@ int drm_ati_pcigart_init(struct drm_device *dev, struct drm_ati_pcigart_info *ga
if (gart_info->gart_table_location == DRM_ATI_GART_MAIN) {
DRM_DEBUG("PCI: no table in VRAM: using normal RAM\n");
- order = drm_order((gart_info->table_size +
- (PAGE_SIZE-1)) / PAGE_SIZE);
- num_pages = 1 << order;
- address = drm_ati_alloc_pcigart_table(order);
- if (!address) {
+ ret = drm_ati_alloc_pcigart_table(dev, gart_info);
+ if (ret) {
DRM_ERROR("cannot allocate PCI GART page!\n");
goto done;
}
- if (!dev->pdev) {
- DRM_ERROR("PCI device unknown!\n");
- goto done;
- }
-
- bus_address = pci_map_single(dev->pdev, address,
- num_pages * PAGE_SIZE,
- PCI_DMA_TODEVICE);
- if (bus_address == 0) {
- DRM_ERROR("unable to map PCIGART pages!\n");
- order = drm_order((gart_info->table_size +
- (PAGE_SIZE-1)) / PAGE_SIZE);
- drm_ati_free_pcigart_table(address, order);
- address = NULL;
- goto done;
- }
+ address = gart_info->table_handle->vaddr;
+ bus_address = gart_info->table_handle->busaddr;
} else {
address = gart_info->addr;
bus_address = gart_info->bus_addr;
- DRM_DEBUG("PCI: Gart Table: VRAM %08X mapped at %08lX\n",
- bus_address, (unsigned long)address);
+ DRM_DEBUG("PCI: Gart Table: VRAM %08LX mapped at %08lX\n",
+ (unsigned long long)bus_address,
+ (unsigned long)address);
}
pci_gart = (u32 *) address;
@@ -214,6 +168,12 @@ int drm_ati_pcigart_init(struct drm_device *dev, struct drm_ati_pcigart_info *ga
}
}
+ if (gart_info->gart_table_location == DRM_ATI_GART_MAIN)
+ dma_sync_single_for_device(&dev->pdev->dev,
+ bus_address,
+ max_pages * sizeof(u32),
+ PCI_DMA_TODEVICE);
+
ret = 1;
#if defined(__i386__) || defined(__x86_64__)
diff --git a/drivers/char/drm/drmP.h b/drivers/char/drm/drmP.h
index a6789f25009..8ea9dd1717a 100644
--- a/drivers/char/drm/drmP.h
+++ b/drivers/char/drm/drmP.h
@@ -54,6 +54,7 @@
#include <linux/pci.h>
#include <linux/jiffies.h>
#include <linux/smp_lock.h> /* For (un)lock_kernel */
+#include <linux/dma-mapping.h>
#include <linux/mm.h>
#include <linux/cdev.h>
#include <linux/mutex.h>
@@ -551,6 +552,8 @@ struct drm_ati_pcigart_info {
int gart_reg_if;
void *addr;
dma_addr_t bus_addr;
+ dma_addr_t table_mask;
+ struct drm_dma_handle *table_handle;
drm_local_map_t mapping;
int table_size;
};
diff --git a/drivers/char/drm/drm_fops.c b/drivers/char/drm/drm_fops.c
index 3992f73299c..f09d4b5002b 100644
--- a/drivers/char/drm/drm_fops.c
+++ b/drivers/char/drm/drm_fops.c
@@ -326,6 +326,7 @@ int drm_release(struct inode *inode, struct file *filp)
struct drm_file *file_priv = filp->private_data;
struct drm_device *dev = file_priv->head->dev;
int retcode = 0;
+ unsigned long irqflags;
lock_kernel();
@@ -357,9 +358,11 @@ int drm_release(struct inode *inode, struct file *filp)
*/
do{
- spin_lock(&dev->lock.spinlock);
+ spin_lock_irqsave(&dev->lock.spinlock,
+ irqflags);
locked = dev->lock.idle_has_lock;
- spin_unlock(&dev->lock.spinlock);
+ spin_unlock_irqrestore(&dev->lock.spinlock,
+ irqflags);
if (locked)
break;
schedule();
diff --git a/drivers/char/drm/drm_lock.c b/drivers/char/drm/drm_lock.c
index bea2a7d5b2b..12dcdd1832f 100644
--- a/drivers/char/drm/drm_lock.c
+++ b/drivers/char/drm/drm_lock.c
@@ -53,6 +53,7 @@ int drm_lock(struct drm_device *dev, void *data, struct drm_file *file_priv)
DECLARE_WAITQUEUE(entry, current);
struct drm_lock *lock = data;
int ret = 0;
+ unsigned long irqflags;
++file_priv->lock_count;
@@ -71,9 +72,9 @@ int drm_lock(struct drm_device *dev, void *data, struct drm_file *file_priv)
return -EINVAL;
add_wait_queue(&dev->lock.lock_queue, &entry);
- spin_lock(&dev->lock.spinlock);
+ spin_lock_irqsave(&dev->lock.spinlock, irqflags);
dev->lock.user_waiters++;
- spin_unlock(&dev->lock.spinlock);
+ spin_unlock_irqrestore(&dev->lock.spinlock, irqflags);
for (;;) {
__set_current_state(TASK_INTERRUPTIBLE);
if (!dev->lock.hw_lock) {
@@ -95,9 +96,9 @@ int drm_lock(struct drm_device *dev, void *data, struct drm_file *file_priv)
break;
}
}
- spin_lock(&dev->lock.spinlock);
+ spin_lock_irqsave(&dev->lock.spinlock, irqflags);
dev->lock.user_waiters--;
- spin_unlock(&dev->lock.spinlock);
+ spin_unlock_irqrestore(&dev->lock.spinlock, irqflags);
__set_current_state(TASK_RUNNING);
remove_wait_queue(&dev->lock.lock_queue, &entry);
@@ -198,8 +199,9 @@ int drm_lock_take(struct drm_lock_data *lock_data,
{
unsigned int old, new, prev;
volatile unsigned int *lock = &lock_data->hw_lock->lock;
+ unsigned long irqflags;
- spin_lock(&lock_data->spinlock);
+ spin_lock_irqsave(&lock_data->spinlock, irqflags);
do {
old = *lock;
if (old & _DRM_LOCK_HELD)
@@ -211,7 +213,7 @@ int drm_lock_take(struct drm_lock_data *lock_data,
}
prev = cmpxchg(lock, old, new);
} while (prev != old);
- spin_unlock(&lock_data->spinlock);
+ spin_unlock_irqrestore(&lock_data->spinlock, irqflags);
if (_DRM_LOCKING_CONTEXT(old) == context) {
if (old & _DRM_LOCK_HELD) {
@@ -272,15 +274,16 @@ int drm_lock_free(struct drm_lock_data *lock_data, unsigned int context)
{
unsigned int old, new, prev;
volatile unsigned int *lock = &lock_data->hw_lock->lock;
+ unsigned long irqflags;
- spin_lock(&lock_data->spinlock);
+ spin_lock_irqsave(&lock_data->spinlock, irqflags);
if (lock_data->kernel_waiters != 0) {
drm_lock_transfer(lock_data, 0);
lock_data->idle_has_lock = 1;
- spin_unlock(&lock_data->spinlock);
+ spin_unlock_irqrestore(&lock_data->spinlock, irqflags);
return 1;
}
- spin_unlock(&lock_data->spinlock);
+ spin_unlock_irqrestore(&lock_data->spinlock, irqflags);
do {
old = *lock;
@@ -344,19 +347,20 @@ static int drm_notifier(void *priv)
void drm_idlelock_take(struct drm_lock_data *lock_data)
{
int ret = 0;
+ unsigned long irqflags;
- spin_lock(&lock_data->spinlock);
+ spin_lock_irqsave(&lock_data->spinlock, irqflags);
lock_data->kernel_waiters++;
if (!lock_data->idle_has_lock) {
- spin_unlock(&lock_data->spinlock);
+ spin_unlock_irqrestore(&lock_data->spinlock, irqflags);
ret = drm_lock_take(lock_data, DRM_KERNEL_CONTEXT);
- spin_lock(&lock_data->spinlock);
+ spin_lock_irqsave(&lock_data->spinlock, irqflags);
if (ret == 1)
lock_data->idle_has_lock = 1;
}
- spin_unlock(&lock_data->spinlock);
+ spin_unlock_irqrestore(&lock_data->spinlock, irqflags);
}
EXPORT_SYMBOL(drm_idlelock_take);
@@ -364,8 +368,9 @@ void drm_idlelock_release(struct drm_lock_data *lock_data)
{
unsigned int old, prev;
volatile unsigned int *lock = &lock_data->hw_lock->lock;
+ unsigned long irqflags;
- spin_lock(&lock_data->spinlock);
+ spin_lock_irqsave(&lock_data->spinlock, irqflags);
if (--lock_data->kernel_waiters == 0) {
if (lock_data->idle_has_lock) {
do {
@@ -376,7 +381,7 @@ void drm_idlelock_release(struct drm_lock_data *lock_data)
lock_data->idle_has_lock = 0;
}
}
- spin_unlock(&lock_data->spinlock);
+ spin_unlock_irqrestore(&lock_data->spinlock, irqflags);
}
EXPORT_SYMBOL(drm_idlelock_release);
diff --git a/drivers/char/drm/drm_pciids.h b/drivers/char/drm/drm_pciids.h
index 715b361f0c2..a6a499f97e2 100644
--- a/drivers/char/drm/drm_pciids.h
+++ b/drivers/char/drm/drm_pciids.h
@@ -205,9 +205,9 @@
{0x1002, 0x71D6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x71DA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_NEW_MEMMAP}, \
{0x1002, 0x71DE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
- {0x1002, 0x7200, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_NEW_MEMMAP}, \
- {0x1002, 0x7210, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
- {0x1002, 0x7211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7200, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7210, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x7211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x7240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \
{0x1002, 0x7243, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \
{0x1002, 0x7244, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \
@@ -238,6 +238,7 @@
{0x1002, 0x7834, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP|RADEON_NEW_MEMMAP}, \
{0x1002, 0x7835, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x791e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS690|RADEON_IS_IGP|RADEON_NEW_MEMMAP|RADEON_IS_IGPGART}, \
+ {0x1002, 0x791f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS690|RADEON_IS_IGP|RADEON_NEW_MEMMAP|RADEON_IS_IGPGART}, \
{0, 0, 0}
#define r128_PCI_IDS \
diff --git a/drivers/char/drm/drm_scatter.c b/drivers/char/drm/drm_scatter.c
index 26d8f675ed5..b2b0f3d4171 100644
--- a/drivers/char/drm/drm_scatter.c
+++ b/drivers/char/drm/drm_scatter.c
@@ -36,6 +36,15 @@
#define DEBUG_SCATTER 0
+static inline void *drm_vmalloc_dma(unsigned long size)
+{
+#if defined(__powerpc__) && defined(CONFIG_NOT_COHERENT_CACHE)
+ return __vmalloc(size, GFP_KERNEL, PAGE_KERNEL | _PAGE_NO_CACHE);
+#else
+ return vmalloc_32(size);
+#endif
+}
+
void drm_sg_cleanup(struct drm_sg_mem * entry)
{
struct page *page;
@@ -104,7 +113,7 @@ int drm_sg_alloc(struct drm_device *dev, struct drm_scatter_gather * request)
}
memset((void *)entry->busaddr, 0, pages * sizeof(*entry->busaddr));
- entry->virtual = vmalloc_32(pages << PAGE_SHIFT);
+ entry->virtual = drm_vmalloc_dma(pages << PAGE_SHIFT);
if (!entry->virtual) {
drm_free(entry->busaddr,
entry->pages * sizeof(*entry->busaddr), DRM_MEM_PAGES);
diff --git a/drivers/char/drm/drm_vm.c b/drivers/char/drm/drm_vm.c
index 3d65c4dcd0c..945df72a51a 100644
--- a/drivers/char/drm/drm_vm.c
+++ b/drivers/char/drm/drm_vm.c
@@ -54,13 +54,24 @@ static pgprot_t drm_io_prot(uint32_t map_type, struct vm_area_struct *vma)
pgprot_val(tmp) |= _PAGE_NO_CACHE;
if (map_type == _DRM_REGISTERS)
pgprot_val(tmp) |= _PAGE_GUARDED;
-#endif
-#if defined(__ia64__)
+#elif defined(__ia64__)
if (efi_range_is_wc(vma->vm_start, vma->vm_end -
vma->vm_start))
tmp = pgprot_writecombine(tmp);
else
tmp = pgprot_noncached(tmp);
+#elif defined(__sparc__)
+ tmp = pgprot_noncached(tmp);
+#endif
+ return tmp;
+}
+
+static pgprot_t drm_dma_prot(uint32_t map_type, struct vm_area_struct *vma)
+{
+ pgprot_t tmp = vm_get_page_prot(vma->vm_flags);
+
+#if defined(__powerpc__) && defined(CONFIG_NOT_COHERENT_CACHE)
+ tmp |= _PAGE_NO_CACHE;
#endif
return tmp;
}
@@ -603,9 +614,6 @@ static int drm_mmap_locked(struct file *filp, struct vm_area_struct *vma)
offset = dev->driver->get_reg_ofs(dev);
vma->vm_flags |= VM_IO; /* not in core dump */
vma->vm_page_prot = drm_io_prot(map->type, vma);
-#ifdef __sparc__
- vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-#endif
if (io_remap_pfn_range(vma, vma->vm_start,
(map->offset + offset) >> PAGE_SHIFT,
vma->vm_end - vma->vm_start,
@@ -624,6 +632,7 @@ static int drm_mmap_locked(struct file *filp, struct vm_area_struct *vma)
page_to_pfn(virt_to_page(map->handle)),
vma->vm_end - vma->vm_start, vma->vm_page_prot))
return -EAGAIN;
+ vma->vm_page_prot = drm_dma_prot(map->type, vma);
/* fall through to _DRM_SHM */
case _DRM_SHM:
vma->vm_ops = &drm_vm_shm_ops;
@@ -631,6 +640,7 @@ static int drm_mmap_locked(struct file *filp, struct vm_area_struct *vma)
/* Don't let this area swap. Change when
DRM_KERNEL advisory is supported. */
vma->vm_flags |= VM_RESERVED;
+ vma->vm_page_prot = drm_dma_prot(map->type, vma);
break;
case _DRM_SCATTER_GATHER:
vma->vm_ops = &drm_vm_sg_ops;
diff --git a/drivers/char/drm/i915_dma.c b/drivers/char/drm/i915_dma.c
index e9d6663bec7..a043bb12301 100644
--- a/drivers/char/drm/i915_dma.c
+++ b/drivers/char/drm/i915_dma.c
@@ -804,6 +804,9 @@ void i915_driver_lastclose(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
+ if (!dev_priv)
+ return;
+
if (dev_priv->agp_heap)
i915_mem_takedown(&(dev_priv->agp_heap));
diff --git a/drivers/char/drm/r128_cce.c b/drivers/char/drm/r128_cce.c
index 892e0a58984..f36adbd3aaf 100644
--- a/drivers/char/drm/r128_cce.c
+++ b/drivers/char/drm/r128_cce.c
@@ -558,6 +558,7 @@ static int r128_do_init_cce(struct drm_device * dev, drm_r128_init_t * init)
#if __OS_HAS_AGP
if (dev_priv->is_pci) {
#endif
+ dev_priv->gart_info.table_mask = DMA_BIT_MASK(32);
dev_priv->gart_info.gart_table_location = DRM_ATI_GART_MAIN;
dev_priv->gart_info.table_size = R128_PCIGART_TABLE_SIZE;
dev_priv->gart_info.addr = NULL;
diff --git a/drivers/char/drm/r300_cmdbuf.c b/drivers/char/drm/r300_cmdbuf.c
index 0f4afc44245..f535812e405 100644
--- a/drivers/char/drm/r300_cmdbuf.c
+++ b/drivers/char/drm/r300_cmdbuf.c
@@ -729,6 +729,47 @@ static void r300_discard_buffer(struct drm_device * dev, struct drm_buf * buf)
buf->used = 0;
}
+static void r300_cmd_wait(drm_radeon_private_t * dev_priv,
+ drm_r300_cmd_header_t header)
+{
+ u32 wait_until;
+ RING_LOCALS;
+
+ if (!header.wait.flags)
+ return;
+
+ wait_until = 0;
+
+ switch(header.wait.flags) {
+ case R300_WAIT_2D:
+ wait_until = RADEON_WAIT_2D_IDLE;
+ break;
+ case R300_WAIT_3D:
+ wait_until = RADEON_WAIT_3D_IDLE;
+ break;
+ case R300_NEW_WAIT_2D_3D:
+ wait_until = RADEON_WAIT_2D_IDLE|RADEON_WAIT_3D_IDLE;
+ break;
+ case R300_NEW_WAIT_2D_2D_CLEAN:
+ wait_until = RADEON_WAIT_2D_IDLE|RADEON_WAIT_2D_IDLECLEAN;
+ break;
+ case R300_NEW_WAIT_3D_3D_CLEAN:
+ wait_until = RADEON_WAIT_3D_IDLE|RADEON_WAIT_3D_IDLECLEAN;
+ break;
+ case R300_NEW_WAIT_2D_2D_CLEAN_3D_3D_CLEAN:
+ wait_until = RADEON_WAIT_2D_IDLE|RADEON_WAIT_2D_IDLECLEAN;
+ wait_until |= RADEON_WAIT_3D_IDLE|RADEON_WAIT_3D_IDLECLEAN;
+ break;
+ default:
+ return;
+ }
+
+ BEGIN_RING(2);
+ OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0));
+ OUT_RING(wait_until);
+ ADVANCE_RING();
+}
+
static int r300_scratch(drm_radeon_private_t *dev_priv,
drm_radeon_kcmd_buffer_t *cmdbuf,
drm_r300_cmd_header_t header)
@@ -909,19 +950,8 @@ int r300_do_cp_cmdbuf(struct drm_device *dev,
break;
case R300_CMD_WAIT:
- /* simple enough, we can do it here */
DRM_DEBUG("R300_CMD_WAIT\n");
- if (header.wait.flags == 0)
- break; /* nothing to do */
-
- {
- RING_LOCALS;
-
- BEGIN_RING(2);
- OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0));
- OUT_RING((header.wait.flags & 0xf) << 14);
- ADVANCE_RING();
- }
+ r300_cmd_wait(dev_priv, header);
break;
case R300_CMD_SCRATCH:
diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c
index 833abc7e55f..9072e4a1894 100644
--- a/drivers/char/drm/radeon_cp.c
+++ b/drivers/char/drm/radeon_cp.c
@@ -1807,6 +1807,7 @@ static int radeon_do_init_cp(struct drm_device * dev, drm_radeon_init_t * init)
} else
#endif
{
+ dev_priv->gart_info.table_mask = DMA_BIT_MASK(32);
/* if we have an offset set from userspace */
if (dev_priv->pcigart_offset_set) {
dev_priv->gart_info.bus_addr =
diff --git a/drivers/char/drm/radeon_drm.h b/drivers/char/drm/radeon_drm.h
index 71e5b21fad2..aab82e121e0 100644
--- a/drivers/char/drm/radeon_drm.h
+++ b/drivers/char/drm/radeon_drm.h
@@ -225,8 +225,20 @@ typedef union {
#define R300_CMD_WAIT 7
# define R300_WAIT_2D 0x1
# define R300_WAIT_3D 0x2
+/* these two defines are DOING IT WRONG - however
+ * we have userspace which relies on using these.
+ * The wait interface is backwards compat new
+ * code should use the NEW_WAIT defines below
+ * THESE ARE NOT BIT FIELDS
+ */
# define R300_WAIT_2D_CLEAN 0x3
# define R300_WAIT_3D_CLEAN 0x4
+
+# define R300_NEW_WAIT_2D_3D 0x3
+# define R300_NEW_WAIT_2D_2D_CLEAN 0x4
+# define R300_NEW_WAIT_3D_3D_CLEAN 0x6
+# define R300_NEW_WAIT_2D_2D_CLEAN_3D_3D_CLEAN 0x8
+
#define R300_CMD_SCRATCH 8
typedef union {
diff --git a/drivers/char/drm/radeon_mem.c b/drivers/char/drm/radeon_mem.c
index 78b34fa7c89..4af5286a36f 100644
--- a/drivers/char/drm/radeon_mem.c
+++ b/drivers/char/drm/radeon_mem.c
@@ -88,7 +88,7 @@ static struct mem_block *alloc_block(struct mem_block *heap, int size,
list_for_each(p, heap) {
int start = (p->start + mask) & ~mask;
- if (p->file_priv == 0 && start + size <= p->start + p->size)
+ if (p->file_priv == NULL && start + size <= p->start + p->size)
return split_block(p, start, size, file_priv);
}
@@ -113,7 +113,7 @@ static void free_block(struct mem_block *p)
/* Assumes a single contiguous range. Needs a special file_priv in
* 'heap' to stop it being subsumed.
*/
- if (p->next->file_priv == 0) {
+ if (p->next->file_priv == NULL) {
struct mem_block *q = p->next;
p->size += q->size;
p->next = q->next;
@@ -121,7 +121,7 @@ static void free_block(struct mem_block *p)
drm_free(q, sizeof(*q), DRM_MEM_BUFS);
}
- if (p->prev->file_priv == 0) {
+ if (p->prev->file_priv == NULL) {
struct mem_block *q = p->prev;
q->size += p->size;
q->next = p->next;
@@ -174,7 +174,7 @@ void radeon_mem_release(struct drm_file *file_priv, struct mem_block *heap)
* 'heap' to stop it being subsumed.
*/
list_for_each(p, heap) {
- while (p->file_priv == 0 && p->next->file_priv == 0) {
+ while (p->file_priv == NULL && p->next->file_priv == NULL) {
struct mem_block *q = p->next;
p->size += q->size;
p->next = q->next;
diff --git a/drivers/char/drm/via_dma.c b/drivers/char/drm/via_dma.c
index 94baec692b5..7a339dba6a6 100644
--- a/drivers/char/drm/via_dma.c
+++ b/drivers/char/drm/via_dma.c
@@ -126,6 +126,8 @@ via_cmdbuf_wait(drm_via_private_t * dev_priv, unsigned int size)
hw_addr, cur_addr, next_addr);
return -1;
}
+ if ((cur_addr < hw_addr) && (next_addr >= hw_addr))
+ msleep(1);
} while ((cur_addr < hw_addr) && (next_addr >= hw_addr));
return 0;
}
@@ -416,27 +418,50 @@ static int via_hook_segment(drm_via_private_t * dev_priv,
int paused, count;
volatile uint32_t *paused_at = dev_priv->last_pause_ptr;
uint32_t reader,ptr;
+ uint32_t diff;
paused = 0;
via_flush_write_combine();
(void) *(volatile uint32_t *)(via_get_dma(dev_priv) -1);
+
*paused_at = pause_addr_lo;
via_flush_write_combine();
(void) *paused_at;
+
reader = *(dev_priv->hw_addr_ptr);
ptr = ((volatile char *)paused_at - dev_priv->dma_ptr) +
dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr + 4;
+
dev_priv->last_pause_ptr = via_get_dma(dev_priv) - 1;
- if ((ptr - reader) <= dev_priv->dma_diff ) {
- count = 10000000;
- while (!(paused = (VIA_READ(0x41c) & 0x80000000)) && count--);
+ /*
+ * If there is a possibility that the command reader will
+ * miss the new pause address and pause on the old one,
+ * In that case we need to program the new start address
+ * using PCI.
+ */
+
+ diff = (uint32_t) (ptr - reader) - dev_priv->dma_diff;
+ count = 10000000;
+ while(diff == 0 && count--) {
+ paused = (VIA_READ(0x41c) & 0x80000000);
+ if (paused)
+ break;
+ reader = *(dev_priv->hw_addr_ptr);
+ diff = (uint32_t) (ptr - reader) - dev_priv->dma_diff;
}
+ paused = VIA_READ(0x41c) & 0x80000000;
+
if (paused && !no_pci_fire) {
reader = *(dev_priv->hw_addr_ptr);
- if ((ptr - reader) == dev_priv->dma_diff) {
-
+ diff = (uint32_t) (ptr - reader) - dev_priv->dma_diff;
+ diff &= (dev_priv->dma_high - 1);
+ if (diff != 0 && diff < (dev_priv->dma_high >> 1)) {
+ DRM_ERROR("Paused at incorrect address. "
+ "0x%08x, 0x%08x 0x%08x\n",
+ ptr, reader, dev_priv->dma_diff);
+ } else if (diff == 0) {
/*
* There is a concern that these writes may stall the PCI bus
* if the GPU is not idle. However, idling the GPU first
@@ -577,6 +602,7 @@ static void via_cmdbuf_jump(drm_via_private_t * dev_priv)
uint32_t pause_addr_lo, pause_addr_hi;
uint32_t jump_addr_lo, jump_addr_hi;
volatile uint32_t *last_pause_ptr;
+ uint32_t dma_low_save1, dma_low_save2;
agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr;
via_align_cmd(dev_priv, HC_HAGPBpID_JUMP, 0, &jump_addr_hi,
@@ -603,8 +629,29 @@ static void via_cmdbuf_jump(drm_via_private_t * dev_priv)
&pause_addr_lo, 0);
*last_pause_ptr = pause_addr_lo;
+ dma_low_save1 = dev_priv->dma_low;
- via_hook_segment( dev_priv, jump_addr_hi, jump_addr_lo, 0);
+ /*
+ * Now, set a trap that will pause the regulator if it tries to rerun the old
+ * command buffer. (Which may happen if via_hook_segment detecs a command regulator pause
+ * and reissues the jump command over PCI, while the regulator has already taken the jump
+ * and actually paused at the current buffer end).
+ * There appears to be no other way to detect this condition, since the hw_addr_pointer
+ * does not seem to get updated immediately when a jump occurs.
+ */
+
+ last_pause_ptr =
+ via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, &pause_addr_hi,
+ &pause_addr_lo, 0) - 1;
+ via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, &pause_addr_hi,
+ &pause_addr_lo, 0);
+ *last_pause_ptr = pause_addr_lo;
+
+ dma_low_save2 = dev_priv->dma_low;
+ dev_priv->dma_low = dma_low_save1;
+ via_hook_segment(dev_priv, jump_addr_hi, jump_addr_lo, 0);
+ dev_priv->dma_low = dma_low_save2;
+ via_hook_segment(dev_priv, pause_addr_hi, pause_addr_lo, 0);
}
diff --git a/drivers/char/drm/via_dmablit.c b/drivers/char/drm/via_dmablit.c
index 33c5197b73c..409e00afdd0 100644
--- a/drivers/char/drm/via_dmablit.c
+++ b/drivers/char/drm/via_dmablit.c
@@ -603,7 +603,7 @@ via_build_sg_info(struct drm_device *dev, drm_via_sg_info_t *vsg, drm_via_dmabli
* (Not a big limitation anyway.)
*/
- if ((xfer->mem_stride - xfer->line_length) >= PAGE_SIZE) {
+ if ((xfer->mem_stride - xfer->line_length) > 2*PAGE_SIZE) {
DRM_ERROR("Too large system memory stride. Stride: %d, "
"Length: %d\n", xfer->mem_stride, xfer->line_length);
return -EINVAL;
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 6bbd4fa50f3..8d6c2089d2a 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -9,7 +9,14 @@ config HW_RANDOM
Hardware Random Number Generator Core infrastructure.
To compile this driver as a module, choose M here: the
- module will be called rng-core.
+ module will be called rng-core. This provides a device
+ that's usually called /dev/hw_random, and which exposes one
+ of possibly several hardware random number generators.
+
+ These hardware random number generators do not feed directly
+ into the kernel's random number generator. That is usually
+ handled by the "rngd" daemon. Documentation/hw_random.txt
+ has more information.
If unsure, say Y.
diff --git a/drivers/char/ip2/i2lib.c b/drivers/char/ip2/i2lib.c
index d6567b32fb5..9c25320121e 100644
--- a/drivers/char/ip2/i2lib.c
+++ b/drivers/char/ip2/i2lib.c
@@ -644,12 +644,12 @@ i2QueueCommands(int type, i2ChanStrPtr pCh, int timeout, int nCommands,
// Normal Expected path - We still hold LOCK
break; /* from for()- Enough room: goto proceed */
}
- }
-
- ip2trace (CHANN, ITRC_QUEUE, 3, 1, totalsize );
+ ip2trace(CHANN, ITRC_QUEUE, 3, 1, totalsize);
+ WRITE_UNLOCK_IRQRESTORE(lock_var_p, flags);
+ } else
+ ip2trace(CHANN, ITRC_QUEUE, 3, 1, totalsize);
- // Prepare to wait for buffers to empty
- WRITE_UNLOCK_IRQRESTORE(lock_var_p,flags);
+ /* Prepare to wait for buffers to empty */
serviceOutgoingFifo(pB); // Dump what we got
if (timeout == 0) {
@@ -1830,6 +1830,8 @@ i2StripFifo(i2eBordStrPtr pB)
default: // Neither packet? should be impossible
ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 5, 1,
PTYPE_OF(pB->i2eLeadoffWord) );
+ WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock,
+ bflags);
break;
} // End of switch on type of packets
diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c
index 46b2a1cc8b5..0c09409fa45 100644
--- a/drivers/char/n_tty.c
+++ b/drivers/char/n_tty.c
@@ -1183,7 +1183,7 @@ static int copy_from_read_buf(struct tty_struct *tty,
return retval;
}
-extern ssize_t redirected_tty_write(struct file *, const char *,
+extern ssize_t redirected_tty_write(struct file *, const char __user *,
size_t, loff_t *);
/**
diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c
index 6d0dc5f9b6b..6a6843a0a67 100644
--- a/drivers/char/nozomi.c
+++ b/drivers/char/nozomi.c
@@ -438,7 +438,7 @@ static void read_mem32(u32 *buf, const void __iomem *mem_addr_start,
u32 size_bytes)
{
u32 i = 0;
- const u32 *ptr = (__force u32 *) mem_addr_start;
+ const u32 __iomem *ptr = mem_addr_start;
u16 *buf16;
if (unlikely(!ptr || !buf))
@@ -448,11 +448,11 @@ static void read_mem32(u32 *buf, const void __iomem *mem_addr_start,
switch (size_bytes) {
case 2: /* 2 bytes */
buf16 = (u16 *) buf;
- *buf16 = __le16_to_cpu(readw((void __iomem *)ptr));
+ *buf16 = __le16_to_cpu(readw(ptr));
goto out;
break;
case 4: /* 4 bytes */
- *(buf) = __le32_to_cpu(readl((void __iomem *)ptr));
+ *(buf) = __le32_to_cpu(readl(ptr));
goto out;
break;
}
@@ -461,11 +461,11 @@ static void read_mem32(u32 *buf, const void __iomem *mem_addr_start,
if (size_bytes - i == 2) {
/* Handle 2 bytes in the end */
buf16 = (u16 *) buf;
- *(buf16) = __le16_to_cpu(readw((void __iomem *)ptr));
+ *(buf16) = __le16_to_cpu(readw(ptr));
i += 2;
} else {
/* Read 4 bytes */
- *(buf) = __le32_to_cpu(readl((void __iomem *)ptr));
+ *(buf) = __le32_to_cpu(readl(ptr));
i += 4;
}
buf++;
@@ -484,7 +484,7 @@ static u32 write_mem32(void __iomem *mem_addr_start, const u32 *buf,
u32 size_bytes)
{
u32 i = 0;
- u32 *ptr = (__force u32 *) mem_addr_start;
+ u32 __iomem *ptr = mem_addr_start;
const u16 *buf16;
if (unlikely(!ptr || !buf))
@@ -494,7 +494,7 @@ static u32 write_mem32(void __iomem *mem_addr_start, const u32 *buf,
switch (size_bytes) {
case 2: /* 2 bytes */
buf16 = (const u16 *)buf;
- writew(__cpu_to_le16(*buf16), (void __iomem *)ptr);
+ writew(__cpu_to_le16(*buf16), ptr);
return 2;
break;
case 1: /*
@@ -502,7 +502,7 @@ static u32 write_mem32(void __iomem *mem_addr_start, const u32 *buf,
* so falling through..
*/
case 4: /* 4 bytes */
- writel(__cpu_to_le32(*buf), (void __iomem *)ptr);
+ writel(__cpu_to_le32(*buf), ptr);
return 4;
break;
}
@@ -511,11 +511,11 @@ static u32 write_mem32(void __iomem *mem_addr_start, const u32 *buf,
if (size_bytes - i == 2) {
/* 2 bytes */
buf16 = (const u16 *)buf;
- writew(__cpu_to_le16(*buf16), (void __iomem *)ptr);
+ writew(__cpu_to_le16(*buf16), ptr);
i += 2;
} else {
/* 4 bytes */
- writel(__cpu_to_le32(*buf), (void __iomem *)ptr);
+ writel(__cpu_to_le32(*buf), ptr);
i += 4;
}
buf++;
diff --git a/drivers/char/rio/riotable.c b/drivers/char/rio/riotable.c
index 991119c9f47..9b52892a501 100644
--- a/drivers/char/rio/riotable.c
+++ b/drivers/char/rio/riotable.c
@@ -425,8 +425,10 @@ int RIOApel(struct rio_info *p)
MapP = &p->RIOConnectTable[Next++];
MapP->HostUniqueNum = HostP->UniqueNum;
- if ((HostP->Flags & RUN_STATE) != RC_RUNNING)
+ if ((HostP->Flags & RUN_STATE) != RC_RUNNING) {
+ rio_spin_unlock_irqrestore(&HostP->HostLock, flags);
continue;
+ }
MapP->RtaUniqueNum = 0;
MapP->ID = 0;
MapP->Flags = SLOT_IN_USE;
diff --git a/drivers/char/rio/riotty.c b/drivers/char/rio/riotty.c
index a4f0b1e3e7f..cfa54361473 100644
--- a/drivers/char/rio/riotty.c
+++ b/drivers/char/rio/riotty.c
@@ -319,6 +319,7 @@ int riotopen(struct tty_struct *tty, struct file *filp)
PortP->State |= RIO_WOPEN;
rio_spin_unlock_irqrestore(&PortP->portSem, flags);
if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) {
+ rio_spin_lock_irqsave(&PortP->portSem, flags);
/*
** ACTION: verify that this is a good thing
** to do here. -- ???
@@ -334,6 +335,7 @@ int riotopen(struct tty_struct *tty, struct file *filp)
func_exit();
return -EINTR;
}
+ rio_spin_lock_irqsave(&PortP->portSem, flags);
}
PortP->State &= ~RIO_WOPEN;
}
@@ -493,6 +495,7 @@ int riotclose(void *ptr)
if (RIOShortCommand(p, PortP, CLOSE, 1, 0) == RIO_FAIL) {
RIOPreemptiveCmd(p, PortP, FCLOSE);
+ rio_spin_lock_irqsave(&PortP->portSem, flags);
goto close_end;
}
@@ -508,6 +511,7 @@ int riotclose(void *ptr)
if (p->RIOHalted) {
RIOClearUp(PortP);
+ rio_spin_lock_irqsave(&PortP->portSem, flags);
goto close_end;
}
if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) {
diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c
index 72f289279d8..f585bc8579e 100644
--- a/drivers/char/rocket.c
+++ b/drivers/char/rocket.c
@@ -83,6 +83,7 @@
#include <linux/pci.h>
#include <asm/uaccess.h>
#include <asm/atomic.h>
+#include <asm/unaligned.h>
#include <linux/bitops.h>
#include <linux/spinlock.h>
#include <linux/init.h>
@@ -1312,7 +1313,7 @@ static int rp_tiocmset(struct tty_struct *tty, struct file *file,
if (clear & TIOCM_DTR)
info->channel.TxControl[3] &= ~SET_DTR;
- sOutDW(info->channel.IndexAddr, *(DWord_t *) & (info->channel.TxControl[0]));
+ out32(info->channel.IndexAddr, info->channel.TxControl);
return 0;
}
@@ -1748,7 +1749,7 @@ static int rp_write(struct tty_struct *tty,
/* Write remaining data into the port's xmit_buf */
while (1) {
- if (info->tty == 0) /* Seemingly obligatory check... */
+ if (!info->tty) /* Seemingly obligatory check... */
goto end;
c = min(count, min(XMIT_BUF_SIZE - info->xmit_cnt - 1, XMIT_BUF_SIZE - info->xmit_head));
@@ -2798,7 +2799,7 @@ static int sReadAiopNumChan(WordIO_t io)
static Byte_t R[4] = { 0x00, 0x00, 0x34, 0x12 };
/* write to chan 0 SRAM */
- sOutDW((DWordIO_t) io + _INDX_ADDR, *((DWord_t *) & R[0]));
+ out32((DWordIO_t) io + _INDX_ADDR, R);
sOutW(io + _INDX_ADDR, 0); /* read from SRAM, chan 0 */
x = sInW(io + _INDX_DATA);
sOutW(io + _INDX_ADDR, 0x4000); /* read from SRAM, chan 4 */
@@ -2864,7 +2865,7 @@ static int sInitChan(CONTROLLER_T * CtlP, CHANNEL_T * ChP, int AiopNum,
R[1] = RData[i + 1] + 0x10 * ChanNum;
R[2] = RData[i + 2];
R[3] = RData[i + 3];
- sOutDW(ChP->IndexAddr, *((DWord_t *) & R[0]));
+ out32(ChP->IndexAddr, R);
}
ChR = ChP->R;
@@ -2887,43 +2888,43 @@ static int sInitChan(CONTROLLER_T * CtlP, CHANNEL_T * ChP, int AiopNum,
ChP->BaudDiv[1] = (Byte_t) ((ChOff + _BAUD) >> 8);
ChP->BaudDiv[2] = (Byte_t) brd9600;
ChP->BaudDiv[3] = (Byte_t) (brd9600 >> 8);
- sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->BaudDiv[0]);
+ out32(ChP->IndexAddr, ChP->BaudDiv);
ChP->TxControl[0] = (Byte_t) (ChOff + _TX_CTRL);
ChP->TxControl[1] = (Byte_t) ((ChOff + _TX_CTRL) >> 8);
ChP->TxControl[2] = 0;
ChP->TxControl[3] = 0;
- sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->TxControl[0]);
+ out32(ChP->IndexAddr, ChP->TxControl);
ChP->RxControl[0] = (Byte_t) (ChOff + _RX_CTRL);
ChP->RxControl[1] = (Byte_t) ((ChOff + _RX_CTRL) >> 8);
ChP->RxControl[2] = 0;
ChP->RxControl[3] = 0;
- sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->RxControl[0]);
+ out32(ChP->IndexAddr, ChP->RxControl);
ChP->TxEnables[0] = (Byte_t) (ChOff + _TX_ENBLS);
ChP->TxEnables[1] = (Byte_t) ((ChOff + _TX_ENBLS) >> 8);
ChP->TxEnables[2] = 0;
ChP->TxEnables[3] = 0;
- sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->TxEnables[0]);
+ out32(ChP->IndexAddr, ChP->TxEnables);
ChP->TxCompare[0] = (Byte_t) (ChOff + _TXCMP1);
ChP->TxCompare[1] = (Byte_t) ((ChOff + _TXCMP1) >> 8);
ChP->TxCompare[2] = 0;
ChP->TxCompare[3] = 0;
- sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->TxCompare[0]);
+ out32(ChP->IndexAddr, ChP->TxCompare);
ChP->TxReplace1[0] = (Byte_t) (ChOff + _TXREP1B1);
ChP->TxReplace1[1] = (Byte_t) ((ChOff + _TXREP1B1) >> 8);
ChP->TxReplace1[2] = 0;
ChP->TxReplace1[3] = 0;
- sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->TxReplace1[0]);
+ out32(ChP->IndexAddr, ChP->TxReplace1);
ChP->TxReplace2[0] = (Byte_t) (ChOff + _TXREP2);
ChP->TxReplace2[1] = (Byte_t) ((ChOff + _TXREP2) >> 8);
ChP->TxReplace2[2] = 0;
ChP->TxReplace2[3] = 0;
- sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->TxReplace2[0]);
+ out32(ChP->IndexAddr, ChP->TxReplace2);
ChP->TxFIFOPtrs = ChOff + _TXF_OUTP;
ChP->TxFIFO = ChOff + _TX_FIFO;
@@ -2979,7 +2980,7 @@ static void sStopRxProcessor(CHANNEL_T * ChP)
R[1] = ChP->R[1];
R[2] = 0x0a;
R[3] = ChP->R[3];
- sOutDW(ChP->IndexAddr, *(DWord_t *) & R[0]);
+ out32(ChP->IndexAddr, R);
}
/***************************************************************************
@@ -3094,13 +3095,13 @@ static int sWriteTxPrioByte(CHANNEL_T * ChP, Byte_t Data)
*WordPtr = ChP->TxPrioBuf; /* data byte address */
DWBuf[2] = Data; /* data byte value */
- sOutDW(IndexAddr, *((DWord_t *) (&DWBuf[0]))); /* write it out */
+ out32(IndexAddr, DWBuf); /* write it out */
*WordPtr = ChP->TxPrioCnt; /* Tx priority count address */
DWBuf[2] = PRI_PEND + 1; /* indicate 1 byte pending */
DWBuf[3] = 0; /* priority buffer pointer */
- sOutDW(IndexAddr, *((DWord_t *) (&DWBuf[0]))); /* write it out */
+ out32(IndexAddr, DWBuf); /* write it out */
} else { /* write it to Tx FIFO */
sWriteTxByte(sGetTxRxDataIO(ChP), Data);
@@ -3147,11 +3148,11 @@ static void sEnInterrupts(CHANNEL_T * ChP, Word_t Flags)
ChP->RxControl[2] |=
((Byte_t) Flags & (RXINT_EN | SRCINT_EN | MCINT_EN));
- sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->RxControl[0]);
+ out32(ChP->IndexAddr, ChP->RxControl);
ChP->TxControl[2] |= ((Byte_t) Flags & TXINT_EN);
- sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->TxControl[0]);
+ out32(ChP->IndexAddr, ChP->TxControl);
if (Flags & CHANINT_EN) {
Mask = sInB(ChP->IntMask) | sBitMapSetTbl[ChP->ChanNum];
@@ -3190,9 +3191,9 @@ static void sDisInterrupts(CHANNEL_T * ChP, Word_t Flags)
ChP->RxControl[2] &=
~((Byte_t) Flags & (RXINT_EN | SRCINT_EN | MCINT_EN));
- sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->RxControl[0]);
+ out32(ChP->IndexAddr, ChP->RxControl);
ChP->TxControl[2] &= ~((Byte_t) Flags & TXINT_EN);
- sOutDW(ChP->IndexAddr, *(DWord_t *) & ChP->TxControl[0]);
+ out32(ChP->IndexAddr, ChP->TxControl);
if (Flags & CHANINT_EN) {
Mask = sInB(ChP->IntMask) & sBitMapClrTbl[ChP->ChanNum];
diff --git a/drivers/char/rocket_int.h b/drivers/char/rocket_int.h
index f3a75791b81..b01d38125a8 100644
--- a/drivers/char/rocket_int.h
+++ b/drivers/char/rocket_int.h
@@ -26,7 +26,6 @@ typedef unsigned int ByteIO_t;
typedef unsigned int Word_t;
typedef unsigned int WordIO_t;
-typedef unsigned long DWord_t;
typedef unsigned int DWordIO_t;
/*
@@ -38,7 +37,6 @@ typedef unsigned int DWordIO_t;
* instruction.
*/
-#ifdef ROCKET_DEBUG_IO
static inline void sOutB(unsigned short port, unsigned char value)
{
#ifdef ROCKET_DEBUG_IO
@@ -55,12 +53,13 @@ static inline void sOutW(unsigned short port, unsigned short value)
outw_p(value, port);
}
-static inline void sOutDW(unsigned short port, unsigned long value)
+static inline void out32(unsigned short port, Byte_t *p)
{
+ u32 value = le32_to_cpu(get_unaligned((__le32 *)p));
#ifdef ROCKET_DEBUG_IO
- printk(KERN_DEBUG "sOutDW(%x, %lx)...\n", port, value);
+ printk(KERN_DEBUG "out32(%x, %lx)...\n", port, value);
#endif
- outl_p(cpu_to_le32(value), port);
+ outl_p(value, port);
}
static inline unsigned char sInB(unsigned short port)
@@ -73,14 +72,6 @@ static inline unsigned short sInW(unsigned short port)
return inw_p(port);
}
-#else /* !ROCKET_DEBUG_IO */
-#define sOutB(a, b) outb_p(b, a)
-#define sOutW(a, b) outw_p(b, a)
-#define sOutDW(port, value) outl_p(cpu_to_le32(value), port)
-#define sInB(a) (inb_p(a))
-#define sInW(a) (inw_p(a))
-#endif /* ROCKET_DEBUG_IO */
-
/* This is used to move arrays of bytes so byte swapping isn't appropriate. */
#define sOutStrW(port, addr, count) if (count) outsw(port, addr, count)
#define sInStrW(port, addr, count) if (count) insw(port, addr, count)
@@ -390,7 +381,7 @@ Call: sClrBreak(ChP)
#define sClrBreak(ChP) \
do { \
(ChP)->TxControl[3] &= ~SETBREAK; \
- sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
+ out32((ChP)->IndexAddr,(ChP)->TxControl); \
} while (0)
/***************************************************************************
@@ -402,7 +393,7 @@ Call: sClrDTR(ChP)
#define sClrDTR(ChP) \
do { \
(ChP)->TxControl[3] &= ~SET_DTR; \
- sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
+ out32((ChP)->IndexAddr,(ChP)->TxControl); \
} while (0)
/***************************************************************************
@@ -415,7 +406,7 @@ Call: sClrRTS(ChP)
do { \
if ((ChP)->rtsToggle) break; \
(ChP)->TxControl[3] &= ~SET_RTS; \
- sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
+ out32((ChP)->IndexAddr,(ChP)->TxControl); \
} while (0)
/***************************************************************************
@@ -489,7 +480,7 @@ Call: sDisCTSFlowCtl(ChP)
#define sDisCTSFlowCtl(ChP) \
do { \
(ChP)->TxControl[2] &= ~CTSFC_EN; \
- sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
+ out32((ChP)->IndexAddr,(ChP)->TxControl); \
} while (0)
/***************************************************************************
@@ -501,7 +492,7 @@ Call: sDisIXANY(ChP)
#define sDisIXANY(ChP) \
do { \
(ChP)->R[0x0e] = 0x86; \
- sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->R[0x0c]); \
+ out32((ChP)->IndexAddr,&(ChP)->R[0x0c]); \
} while (0)
/***************************************************************************
@@ -515,7 +506,7 @@ Comments: Function sSetParity() can be used in place of functions sEnParity(),
#define sDisParity(ChP) \
do { \
(ChP)->TxControl[2] &= ~PARITY_EN; \
- sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
+ out32((ChP)->IndexAddr,(ChP)->TxControl); \
} while (0)
/***************************************************************************
@@ -527,7 +518,7 @@ Call: sDisRTSToggle(ChP)
#define sDisRTSToggle(ChP) \
do { \
(ChP)->TxControl[2] &= ~RTSTOG_EN; \
- sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
+ out32((ChP)->IndexAddr,(ChP)->TxControl); \
(ChP)->rtsToggle = 0; \
} while (0)
@@ -540,7 +531,7 @@ Call: sDisRxFIFO(ChP)
#define sDisRxFIFO(ChP) \
do { \
(ChP)->R[0x32] = 0x0a; \
- sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->R[0x30]); \
+ out32((ChP)->IndexAddr,&(ChP)->R[0x30]); \
} while (0)
/***************************************************************************
@@ -567,7 +558,7 @@ Call: sDisTransmit(ChP)
#define sDisTransmit(ChP) \
do { \
(ChP)->TxControl[3] &= ~TX_ENABLE; \
- sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
+ out32((ChP)->IndexAddr,(ChP)->TxControl); \
} while (0)
/***************************************************************************
@@ -579,7 +570,7 @@ Call: sDisTxSoftFlowCtl(ChP)
#define sDisTxSoftFlowCtl(ChP) \
do { \
(ChP)->R[0x06] = 0x8a; \
- sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->R[0x04]); \
+ out32((ChP)->IndexAddr,&(ChP)->R[0x04]); \
} while (0)
/***************************************************************************
@@ -604,7 +595,7 @@ Call: sEnCTSFlowCtl(ChP)
#define sEnCTSFlowCtl(ChP) \
do { \
(ChP)->TxControl[2] |= CTSFC_EN; \
- sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
+ out32((ChP)->IndexAddr,(ChP)->TxControl); \
} while (0)
/***************************************************************************
@@ -616,7 +607,7 @@ Call: sEnIXANY(ChP)
#define sEnIXANY(ChP) \
do { \
(ChP)->R[0x0e] = 0x21; \
- sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->R[0x0c]); \
+ out32((ChP)->IndexAddr,&(ChP)->R[0x0c]); \
} while (0)
/***************************************************************************
@@ -633,7 +624,7 @@ Warnings: Before enabling parity odd or even parity should be chosen using
#define sEnParity(ChP) \
do { \
(ChP)->TxControl[2] |= PARITY_EN; \
- sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
+ out32((ChP)->IndexAddr,(ChP)->TxControl); \
} while (0)
/***************************************************************************
@@ -647,10 +638,10 @@ Comments: This function will disable RTS flow control and clear the RTS
#define sEnRTSToggle(ChP) \
do { \
(ChP)->RxControl[2] &= ~RTSFC_EN; \
- sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->RxControl[0]); \
+ out32((ChP)->IndexAddr,(ChP)->RxControl); \
(ChP)->TxControl[2] |= RTSTOG_EN; \
(ChP)->TxControl[3] &= ~SET_RTS; \
- sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
+ out32((ChP)->IndexAddr,(ChP)->TxControl); \
(ChP)->rtsToggle = 1; \
} while (0)
@@ -663,7 +654,7 @@ Call: sEnRxFIFO(ChP)
#define sEnRxFIFO(ChP) \
do { \
(ChP)->R[0x32] = 0x08; \
- sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->R[0x30]); \
+ out32((ChP)->IndexAddr,&(ChP)->R[0x30]); \
} while (0)
/***************************************************************************
@@ -684,7 +675,7 @@ Warnings: This function must be called after valid microcode has been
#define sEnRxProcessor(ChP) \
do { \
(ChP)->RxControl[2] |= RXPROC_EN; \
- sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->RxControl[0]); \
+ out32((ChP)->IndexAddr,(ChP)->RxControl); \
} while (0)
/***************************************************************************
@@ -708,7 +699,7 @@ Call: sEnTransmit(ChP)
#define sEnTransmit(ChP) \
do { \
(ChP)->TxControl[3] |= TX_ENABLE; \
- sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
+ out32((ChP)->IndexAddr,(ChP)->TxControl); \
} while (0)
/***************************************************************************
@@ -720,7 +711,7 @@ Call: sEnTxSoftFlowCtl(ChP)
#define sEnTxSoftFlowCtl(ChP) \
do { \
(ChP)->R[0x06] = 0xc5; \
- sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->R[0x04]); \
+ out32((ChP)->IndexAddr,&(ChP)->R[0x04]); \
} while (0)
/***************************************************************************
@@ -927,7 +918,7 @@ Call: sSendBreak(ChP)
#define sSendBreak(ChP) \
do { \
(ChP)->TxControl[3] |= SETBREAK; \
- sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
+ out32((ChP)->IndexAddr,(ChP)->TxControl); \
} while (0)
/***************************************************************************
@@ -941,7 +932,7 @@ Call: sSetBaud(ChP,Divisor)
do { \
(ChP)->BaudDiv[2] = (Byte_t)(DIVISOR); \
(ChP)->BaudDiv[3] = (Byte_t)((DIVISOR) >> 8); \
- sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->BaudDiv[0]); \
+ out32((ChP)->IndexAddr,(ChP)->BaudDiv); \
} while (0)
/***************************************************************************
@@ -953,7 +944,7 @@ Call: sSetData7(ChP)
#define sSetData7(ChP) \
do { \
(ChP)->TxControl[2] &= ~DATA8BIT; \
- sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
+ out32((ChP)->IndexAddr,(ChP)->TxControl); \
} while (0)
/***************************************************************************
@@ -965,7 +956,7 @@ Call: sSetData8(ChP)
#define sSetData8(ChP) \
do { \
(ChP)->TxControl[2] |= DATA8BIT; \
- sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
+ out32((ChP)->IndexAddr,(ChP)->TxControl); \
} while (0)
/***************************************************************************
@@ -977,7 +968,7 @@ Call: sSetDTR(ChP)
#define sSetDTR(ChP) \
do { \
(ChP)->TxControl[3] |= SET_DTR; \
- sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
+ out32((ChP)->IndexAddr,(ChP)->TxControl); \
} while (0)
/***************************************************************************
@@ -994,7 +985,7 @@ Warnings: This function has no effect unless parity is enabled with function
#define sSetEvenParity(ChP) \
do { \
(ChP)->TxControl[2] |= EVEN_PAR; \
- sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
+ out32((ChP)->IndexAddr,(ChP)->TxControl); \
} while (0)
/***************************************************************************
@@ -1011,7 +1002,7 @@ Warnings: This function has no effect unless parity is enabled with function
#define sSetOddParity(ChP) \
do { \
(ChP)->TxControl[2] &= ~EVEN_PAR; \
- sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
+ out32((ChP)->IndexAddr,(ChP)->TxControl); \
} while (0)
/***************************************************************************
@@ -1024,7 +1015,7 @@ Call: sSetRTS(ChP)
do { \
if ((ChP)->rtsToggle) break; \
(ChP)->TxControl[3] |= SET_RTS; \
- sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
+ out32((ChP)->IndexAddr,(ChP)->TxControl); \
} while (0)
/***************************************************************************
@@ -1050,7 +1041,7 @@ Comments: An interrupt will be generated when the trigger level is reached
do { \
(ChP)->RxControl[2] &= ~TRIG_MASK; \
(ChP)->RxControl[2] |= LEVEL; \
- sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->RxControl[0]); \
+ out32((ChP)->IndexAddr,(ChP)->RxControl); \
} while (0)
/***************************************************************************
@@ -1062,7 +1053,7 @@ Call: sSetStop1(ChP)
#define sSetStop1(ChP) \
do { \
(ChP)->TxControl[2] &= ~STOP2; \
- sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
+ out32((ChP)->IndexAddr,(ChP)->TxControl); \
} while (0)
/***************************************************************************
@@ -1074,7 +1065,7 @@ Call: sSetStop2(ChP)
#define sSetStop2(ChP) \
do { \
(ChP)->TxControl[2] |= STOP2; \
- sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->TxControl[0]); \
+ out32((ChP)->IndexAddr,(ChP)->TxControl); \
} while (0)
/***************************************************************************
@@ -1087,7 +1078,7 @@ Call: sSetTxXOFFChar(ChP,Ch)
#define sSetTxXOFFChar(ChP,CH) \
do { \
(ChP)->R[0x07] = (CH); \
- sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->R[0x04]); \
+ out32((ChP)->IndexAddr,&(ChP)->R[0x04]); \
} while (0)
/***************************************************************************
@@ -1100,7 +1091,7 @@ Call: sSetTxXONChar(ChP,Ch)
#define sSetTxXONChar(ChP,CH) \
do { \
(ChP)->R[0x0b] = (CH); \
- sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->R[0x08]); \
+ out32((ChP)->IndexAddr,&(ChP)->R[0x08]); \
} while (0)
/***************************************************************************
@@ -1113,7 +1104,7 @@ Comments: This function is used to start a Rx processor after it was
will restart both the Rx processor and software input flow control.
*/
-#define sStartRxProcessor(ChP) sOutDW((ChP)->IndexAddr,*(DWord_t *)&(ChP)->R[0])
+#define sStartRxProcessor(ChP) out32((ChP)->IndexAddr,&(ChP)->R[0])
/***************************************************************************
Function: sWriteTxByte
diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index d73663a5232..fc555a90bb2 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -67,7 +67,7 @@ static void cpuidle_idle_call(void)
/* enter the state and update stats */
dev->last_residency = target_state->enter(dev, target_state);
dev->last_state = target_state;
- target_state->time += dev->last_residency;
+ target_state->time += (unsigned long long)dev->last_residency;
target_state->usage++;
/* give the governor an opportunity to reflect on the outcome */
@@ -224,7 +224,7 @@ static void poll_idle_init(struct cpuidle_device *dev)
state->exit_latency = 0;
state->target_residency = 0;
state->power_usage = -1;
- state->flags = CPUIDLE_FLAG_POLL | CPUIDLE_FLAG_TIME_VALID;
+ state->flags = CPUIDLE_FLAG_POLL;
state->enter = poll_idle;
}
#else
diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c
index 69102ca0568..e949618b9be 100644
--- a/drivers/cpuidle/sysfs.c
+++ b/drivers/cpuidle/sysfs.c
@@ -218,6 +218,12 @@ static ssize_t show_state_##_name(struct cpuidle_state *state, char *buf) \
return sprintf(buf, "%u\n", state->_name);\
}
+#define define_show_state_ull_function(_name) \
+static ssize_t show_state_##_name(struct cpuidle_state *state, char *buf) \
+{ \
+ return sprintf(buf, "%llu\n", state->_name);\
+}
+
#define define_show_state_str_function(_name) \
static ssize_t show_state_##_name(struct cpuidle_state *state, char *buf) \
{ \
@@ -228,8 +234,8 @@ static ssize_t show_state_##_name(struct cpuidle_state *state, char *buf) \
define_show_state_function(exit_latency)
define_show_state_function(power_usage)
-define_show_state_function(usage)
-define_show_state_function(time)
+define_show_state_ull_function(usage)
+define_show_state_ull_function(time)
define_show_state_str_function(name)
define_show_state_str_function(desc)
diff --git a/drivers/crypto/hifn_795x.c b/drivers/crypto/hifn_795x.c
index 3110bf7014f..81f3f950cd7 100644
--- a/drivers/crypto/hifn_795x.c
+++ b/drivers/crypto/hifn_795x.c
@@ -392,8 +392,8 @@ static atomic_t hifn_dev_number;
struct hifn_desc
{
- volatile u32 l;
- volatile u32 p;
+ volatile __le32 l;
+ volatile __le32 p;
};
struct hifn_dma {
@@ -481,10 +481,10 @@ struct hifn_device
struct hifn_base_command
{
- volatile u16 masks;
- volatile u16 session_num;
- volatile u16 total_source_count;
- volatile u16 total_dest_count;
+ volatile __le16 masks;
+ volatile __le16 session_num;
+ volatile __le16 total_source_count;
+ volatile __le16 total_dest_count;
};
#define HIFN_BASE_CMD_COMP 0x0100 /* enable compression engine */
@@ -504,10 +504,10 @@ struct hifn_base_command
*/
struct hifn_crypt_command
{
- volatile u16 masks;
- volatile u16 header_skip;
- volatile u16 source_count;
- volatile u16 reserved;
+ volatile __le16 masks;
+ volatile __le16 header_skip;
+ volatile __le16 source_count;
+ volatile __le16 reserved;
};
#define HIFN_CRYPT_CMD_ALG_MASK 0x0003 /* algorithm: */
@@ -670,7 +670,7 @@ static inline u32 hifn_read_0(struct hifn_device *dev, u32 reg)
{
u32 ret;
- ret = readl((char *)(dev->bar[0]) + reg);
+ ret = readl(dev->bar[0] + reg);
return ret;
}
@@ -679,19 +679,19 @@ static inline u32 hifn_read_1(struct hifn_device *dev, u32 reg)
{
u32 ret;
- ret = readl((char *)(dev->bar[1]) + reg);
+ ret = readl(dev->bar[1] + reg);
return ret;
}
static inline void hifn_write_0(struct hifn_device *dev, u32 reg, u32 val)
{
- writel(val, (char *)(dev->bar[0]) + reg);
+ writel(val, dev->bar[0] + reg);
}
static inline void hifn_write_1(struct hifn_device *dev, u32 reg, u32 val)
{
- writel(val, (char *)(dev->bar[1]) + reg);
+ writel(val, dev->bar[1] + reg);
}
static void hifn_wait_puc(struct hifn_device *dev)
diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
index ad2f938597e..72692309398 100644
--- a/drivers/dma/fsldma.c
+++ b/drivers/dma/fsldma.c
@@ -123,6 +123,11 @@ static dma_addr_t get_ndar(struct fsl_dma_chan *fsl_chan)
return DMA_IN(fsl_chan, &fsl_chan->reg_base->ndar, 64);
}
+static u32 get_bcr(struct fsl_dma_chan *fsl_chan)
+{
+ return DMA_IN(fsl_chan, &fsl_chan->reg_base->bcr, 32);
+}
+
static int dma_is_idle(struct fsl_dma_chan *fsl_chan)
{
u32 sr = get_sr(fsl_chan);
@@ -426,6 +431,9 @@ fsl_dma_prep_interrupt(struct dma_chan *chan)
new->async_tx.cookie = -EBUSY;
new->async_tx.ack = 0;
+ /* Insert the link descriptor to the LD ring */
+ list_add_tail(&new->node, &new->async_tx.tx_list);
+
/* Set End-of-link to the last link descriptor of new list*/
set_ld_eol(fsl_chan, new);
@@ -701,6 +709,23 @@ static irqreturn_t fsl_dma_chan_do_interrupt(int irq, void *data)
if (stat & FSL_DMA_SR_TE)
dev_err(fsl_chan->dev, "Transfer Error!\n");
+ /* Programming Error
+ * The DMA_INTERRUPT async_tx is a NULL transfer, which will
+ * triger a PE interrupt.
+ */
+ if (stat & FSL_DMA_SR_PE) {
+ dev_dbg(fsl_chan->dev, "event: Programming Error INT\n");
+ if (get_bcr(fsl_chan) == 0) {
+ /* BCR register is 0, this is a DMA_INTERRUPT async_tx.
+ * Now, update the completed cookie, and continue the
+ * next uncompleted transfer.
+ */
+ fsl_dma_update_completed_cookie(fsl_chan);
+ fsl_chan_xfer_ld_queue(fsl_chan);
+ }
+ stat &= ~FSL_DMA_SR_PE;
+ }
+
/* If the link descriptor segment transfer finishes,
* we will recycle the used descriptor.
*/
@@ -841,6 +866,11 @@ static int fsl_dma_self_test(struct fsl_dma_chan *fsl_chan)
tx3 = fsl_dma_prep_memcpy(chan, dma_dest, dma_src, test_size / 4, 0);
async_tx_ack(tx3);
+ /* Interrupt tx test */
+ tx1 = fsl_dma_prep_interrupt(chan);
+ async_tx_ack(tx1);
+ cookie = fsl_dma_tx_submit(tx1);
+
/* Test exchanging the prepared tx sort */
cookie = fsl_dma_tx_submit(tx3);
cookie = fsl_dma_tx_submit(tx2);
diff --git a/drivers/dma/fsldma.h b/drivers/dma/fsldma.h
index ba78c42121b..6faf07ba0d0 100644
--- a/drivers/dma/fsldma.h
+++ b/drivers/dma/fsldma.h
@@ -40,6 +40,7 @@
#define FSL_DMA_MR_EOTIE 0x00000080
#define FSL_DMA_SR_CH 0x00000020
+#define FSL_DMA_SR_PE 0x00000010
#define FSL_DMA_SR_CB 0x00000004
#define FSL_DMA_SR_TE 0x00000080
#define FSL_DMA_SR_EOSI 0x00000002
@@ -74,12 +75,15 @@
#define FSL_DMA_DGSR_EOSI 0x02
#define FSL_DMA_DGSR_EOLSI 0x01
+typedef u64 __bitwise v64;
+typedef u32 __bitwise v32;
+
struct fsl_dma_ld_hw {
- u64 __bitwise src_addr;
- u64 __bitwise dst_addr;
- u64 __bitwise next_ln_addr;
- u32 __bitwise count;
- u32 __bitwise reserve;
+ v64 src_addr;
+ v64 dst_addr;
+ v64 next_ln_addr;
+ v32 count;
+ v32 reserve;
} __attribute__((aligned(32)));
struct fsl_desc_sw {
@@ -91,13 +95,13 @@ struct fsl_desc_sw {
} __attribute__((aligned(32)));
struct fsl_dma_chan_regs {
- u32 __bitwise mr; /* 0x00 - Mode Register */
- u32 __bitwise sr; /* 0x04 - Status Register */
- u64 __bitwise cdar; /* 0x08 - Current descriptor address register */
- u64 __bitwise sar; /* 0x10 - Source Address Register */
- u64 __bitwise dar; /* 0x18 - Destination Address Register */
- u32 __bitwise bcr; /* 0x20 - Byte Count Register */
- u64 __bitwise ndar; /* 0x24 - Next Descriptor Address Register */
+ u32 mr; /* 0x00 - Mode Register */
+ u32 sr; /* 0x04 - Status Register */
+ u64 cdar; /* 0x08 - Current descriptor address register */
+ u64 sar; /* 0x10 - Source Address Register */
+ u64 dar; /* 0x18 - Destination Address Register */
+ u32 bcr; /* 0x20 - Byte Count Register */
+ u64 ndar; /* 0x24 - Next Descriptor Address Register */
};
struct fsl_dma_chan;
@@ -150,25 +154,27 @@ struct fsl_dma_chan {
#ifndef __powerpc64__
static u64 in_be64(const u64 __iomem *addr)
{
- return ((u64)in_be32((u32 *)addr) << 32) | (in_be32((u32 *)addr + 1));
+ return ((u64)in_be32((u32 __iomem *)addr) << 32) |
+ (in_be32((u32 __iomem *)addr + 1));
}
static void out_be64(u64 __iomem *addr, u64 val)
{
- out_be32((u32 *)addr, val >> 32);
- out_be32((u32 *)addr + 1, (u32)val);
+ out_be32((u32 __iomem *)addr, val >> 32);
+ out_be32((u32 __iomem *)addr + 1, (u32)val);
}
/* There is no asm instructions for 64 bits reverse loads and stores */
static u64 in_le64(const u64 __iomem *addr)
{
- return ((u64)in_le32((u32 *)addr + 1) << 32) | (in_le32((u32 *)addr));
+ return ((u64)in_le32((u32 __iomem *)addr + 1) << 32) |
+ (in_le32((u32 __iomem *)addr));
}
static void out_le64(u64 __iomem *addr, u64 val)
{
- out_le32((u32 *)addr + 1, val >> 32);
- out_le32((u32 *)addr, (u32)val);
+ out_le32((u32 __iomem *)addr + 1, val >> 32);
+ out_le32((u32 __iomem *)addr, (u32)val);
}
#endif
@@ -181,9 +187,11 @@ static void out_le64(u64 __iomem *addr, u64 val)
#define DMA_TO_CPU(fsl_chan, d, width) \
(((fsl_chan)->feature & FSL_DMA_BIG_ENDIAN) ? \
- be##width##_to_cpu(d) : le##width##_to_cpu(d))
+ be##width##_to_cpu((__force __be##width)(v##width)d) : \
+ le##width##_to_cpu((__force __le##width)(v##width)d))
#define CPU_TO_DMA(fsl_chan, c, width) \
(((fsl_chan)->feature & FSL_DMA_BIG_ENDIAN) ? \
- cpu_to_be##width(c) : cpu_to_le##width(c))
+ (__force v##width)cpu_to_be##width(c) : \
+ (__force v##width)cpu_to_le##width(c))
#endif /* __DMA_FSLDMA_H */
diff --git a/drivers/dma/ioat_dca.c b/drivers/dma/ioat_dca.c
index 0fa8a98051a..9e922760b7f 100644
--- a/drivers/dma/ioat_dca.c
+++ b/drivers/dma/ioat_dca.c
@@ -98,7 +98,7 @@ struct ioat_dca_slot {
struct ioat_dca_priv {
void __iomem *iobase;
- void *dca_base;
+ void __iomem *dca_base;
int max_requesters;
int requester_count;
u8 tag_map[IOAT_TAG_MAP_LEN];
@@ -338,7 +338,7 @@ static struct dca_ops ioat2_dca_ops = {
.get_tag = ioat2_dca_get_tag,
};
-static int ioat2_dca_count_dca_slots(void *iobase, u16 dca_offset)
+static int ioat2_dca_count_dca_slots(void __iomem *iobase, u16 dca_offset)
{
int slots = 0;
u32 req;
diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c
index 996d61f0d46..ca6d51efd8b 100644
--- a/drivers/firewire/fw-ohci.c
+++ b/drivers/firewire/fw-ohci.c
@@ -401,7 +401,8 @@ static void ar_context_tasklet(unsigned long data)
if (d->res_count == 0) {
size_t size, rest, offset;
- dma_addr_t buffer_bus;
+ dma_addr_t start_bus;
+ void *start;
/*
* This descriptor is finished and we may have a
@@ -410,9 +411,9 @@ static void ar_context_tasklet(unsigned long data)
*/
offset = offsetof(struct ar_buffer, data);
- buffer_bus = le32_to_cpu(ab->descriptor.data_address) - offset;
+ start = buffer = ab;
+ start_bus = le32_to_cpu(ab->descriptor.data_address) - offset;
- buffer = ab;
ab = ab->next;
d = &ab->descriptor;
size = buffer + PAGE_SIZE - ctx->pointer;
@@ -427,7 +428,7 @@ static void ar_context_tasklet(unsigned long data)
buffer = handle_ar_packet(ctx, buffer);
dma_free_coherent(ohci->card.device, PAGE_SIZE,
- buffer, buffer_bus);
+ start, start_bus);
ar_context_add_page(ctx);
} else {
buffer = ctx->pointer;
diff --git a/drivers/firewire/fw-transaction.c b/drivers/firewire/fw-transaction.c
index 99529e59a0b..e6f1bda3894 100644
--- a/drivers/firewire/fw-transaction.c
+++ b/drivers/firewire/fw-transaction.c
@@ -736,6 +736,12 @@ fw_core_handle_response(struct fw_card *card, struct fw_packet *p)
break;
}
+ /*
+ * The response handler may be executed while the request handler
+ * is still pending. Cancel the request handler.
+ */
+ card->driver->cancel_packet(card, &t->packet);
+
t->callback(card, rcode, data, data_length, t->callback_data);
}
EXPORT_SYMBOL(fw_core_handle_response);
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index d73a768e176..f0b00ec1e47 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -968,7 +968,7 @@ int hid_input_report(struct hid_device *hid, int type, u8 *data, int size, int i
size--;
}
- /* dump the report descriptor */
+ /* dump the report */
dbg_hid("report %d (size %u) = ", n, size);
for (i = 0; i < size; i++)
dbg_hid_line(" %02x", data[i]);
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 5a38fb27d69..c3eb3f13e2c 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -98,18 +98,16 @@ struct hidinput_key_translation {
static struct hidinput_key_translation apple_fn_keys[] = {
{ KEY_BACKSPACE, KEY_DELETE },
- { KEY_F1, KEY_BRIGHTNESSDOWN, APPLE_FLAG_FKEY },
- { KEY_F2, KEY_BRIGHTNESSUP, APPLE_FLAG_FKEY },
- { KEY_F3, KEY_CYCLEWINDOWS, APPLE_FLAG_FKEY }, /* Exposé */
- { KEY_F4, KEY_FN_F4, APPLE_FLAG_FKEY }, /* Dashboard */
- { KEY_F5, KEY_FN_F5 },
- { KEY_F6, KEY_FN_F6 },
- { KEY_F7, KEY_BACK, APPLE_FLAG_FKEY },
- { KEY_F8, KEY_PLAYPAUSE, APPLE_FLAG_FKEY },
- { KEY_F9, KEY_FORWARD, APPLE_FLAG_FKEY },
- { KEY_F10, KEY_MUTE, APPLE_FLAG_FKEY },
- { KEY_F11, KEY_VOLUMEDOWN, APPLE_FLAG_FKEY },
- { KEY_F12, KEY_VOLUMEUP, APPLE_FLAG_FKEY },
+ { KEY_F1, KEY_BRIGHTNESSDOWN, APPLE_FLAG_FKEY },
+ { KEY_F2, KEY_BRIGHTNESSUP, APPLE_FLAG_FKEY },
+ { KEY_F3, KEY_FN_F5, APPLE_FLAG_FKEY }, /* Exposé */
+ { KEY_F4, KEY_FN_F4, APPLE_FLAG_FKEY }, /* Dashboard */
+ { KEY_F7, KEY_PREVIOUSSONG, APPLE_FLAG_FKEY },
+ { KEY_F8, KEY_PLAYPAUSE, APPLE_FLAG_FKEY },
+ { KEY_F9, KEY_NEXTSONG, APPLE_FLAG_FKEY },
+ { KEY_F10, KEY_MUTE, APPLE_FLAG_FKEY },
+ { KEY_F11, KEY_VOLUMEDOWN, APPLE_FLAG_FKEY },
+ { KEY_F12, KEY_VOLUMEUP, APPLE_FLAG_FKEY },
{ KEY_UP, KEY_PAGEUP },
{ KEY_DOWN, KEY_PAGEDOWN },
{ KEY_LEFT, KEY_HOME },
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index b38e559b7a4..d95979f0e02 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -278,7 +278,7 @@ static int hid_submit_ctrl(struct hid_device *hid)
usbhid->urbctrl->pipe = usb_rcvctrlpipe(hid_to_usb_dev(hid), 0);
maxpacket = usb_maxpacket(hid_to_usb_dev(hid), usbhid->urbctrl->pipe, 0);
if (maxpacket > 0) {
- padlen = (len + maxpacket - 1) / maxpacket;
+ padlen = DIV_ROUND_UP(len, maxpacket);
padlen *= maxpacket;
if (padlen > usbhid->bufsize)
padlen = usbhid->bufsize;
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index e6d05f6b1c1..e29a057cbea 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -345,6 +345,9 @@
#define USB_VENDOR_ID_NATIONAL_SEMICONDUCTOR 0x0400
#define USB_DEVICE_ID_N_S_HARMONY 0xc359
+#define USB_VENDOR_ID_NATSU 0x08b7
+#define USB_DEVICE_ID_NATSU_GAMEPAD 0x0001
+
#define USB_VENDOR_ID_NEC 0x073e
#define USB_DEVICE_ID_NEC_USB_GAME_PAD 0x0301
@@ -426,6 +429,7 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_DRIVING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FLYING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FIGHTING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
+ { USB_VENDOR_ID_NATSU, USB_DEVICE_ID_NATSU_GAMEPAD, HID_QUIRK_BADPAD },
{ USB_VENDOR_ID_NEC, USB_DEVICE_ID_NEC_USB_GAME_PAD, HID_QUIRK_BADPAD },
{ USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RUMBLEPAD, HID_QUIRK_BADPAD },
{ USB_VENDOR_ID_TOPMAX, USB_DEVICE_ID_TOPMAX_COBRAPAD, HID_QUIRK_BADPAD },
@@ -624,7 +628,7 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_JIS, HID_QUIRK_APPLE_HAS_FN },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ANSI, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE | HID_QUIRK_APPLE_ISO_KEYBOARD },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI, HID_QUIRK_APPLE_HAS_FN },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD },
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 368879ff5d8..4dc76bc45c9 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -337,8 +337,9 @@ config SENSORS_IBMPEX
help
If you say yes here you get support for the temperature and
power sensors in various IBM System X servers that support
- PowerExecutive. So far this includes the x3550, x3650, x3655,
- x3755, and certain HS20 blades.
+ PowerExecutive. So far this includes the x3350, x3550, x3650,
+ x3655, and x3755; the x3800, x3850, and x3950 models that have
+ PCI Express; and some of the HS2x, LS2x, and QS2x blades.
This driver can also be built as a module. If so, the module
will be called ibmpex.
diff --git a/drivers/hwmon/ibmpex.c b/drivers/hwmon/ibmpex.c
index 9c9cdb0685e..4e9b19c6732 100644
--- a/drivers/hwmon/ibmpex.c
+++ b/drivers/hwmon/ibmpex.c
@@ -327,10 +327,14 @@ static int is_temp_sensor(const char *sensor_id, int len)
return 0;
}
-static int power_sensor_multiplier(const char *sensor_id, int len)
+static int power_sensor_multiplier(struct ibmpex_bmc_data *data,
+ const char *sensor_id, int len)
{
int i;
+ if (data->sensor_major == 2)
+ return 1000000;
+
for (i = PEX_SENSOR_TYPE_LEN; i < len - 1; i++)
if (!memcmp(&sensor_id[i], watt_sensor_sig, PEX_MULT_LEN))
return 1000000;
@@ -398,14 +402,15 @@ static int ibmpex_find_sensors(struct ibmpex_bmc_data *data)
num_power++;
sensor_counter = num_power;
data->sensors[i].multiplier =
- power_sensor_multiplier(data->rx_msg_data,
- data->rx_msg_len);
+ power_sensor_multiplier(data,
+ data->rx_msg_data,
+ data->rx_msg_len);
} else if (is_temp_sensor(data->rx_msg_data,
data->rx_msg_len)) {
sensor_type = TEMP_SENSOR;
num_temp++;
sensor_counter = num_temp;
- data->sensors[i].multiplier = 1;
+ data->sensors[i].multiplier = 1000;
} else
continue;
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index 5c85670e2d1..f942ecdd47c 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -1367,7 +1367,8 @@ w83781d_isa_probe(struct platform_device *pdev)
/* Reserve the ISA region */
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
- if (!request_region(res->start, W83781D_EXTENT, "w83781d")) {
+ if (!request_region(res->start + W83781D_ADDR_REG_OFFSET, 2,
+ "w83781d")) {
err = -EBUSY;
goto exit;
}
@@ -1415,7 +1416,7 @@ w83781d_isa_probe(struct platform_device *pdev)
device_remove_file(&pdev->dev, &dev_attr_name);
kfree(data);
exit_release_region:
- release_region(res->start, W83781D_EXTENT);
+ release_region(res->start + W83781D_ADDR_REG_OFFSET, 2);
exit:
return err;
}
@@ -1429,7 +1430,7 @@ w83781d_isa_remove(struct platform_device *pdev)
sysfs_remove_group(&pdev->dev.kobj, &w83781d_group);
sysfs_remove_group(&pdev->dev.kobj, &w83781d_group_opt);
device_remove_file(&pdev->dev, &dev_attr_name);
- release_region(data->client.addr, W83781D_EXTENT);
+ release_region(data->client.addr + W83781D_ADDR_REG_OFFSET, 2);
kfree(data);
return 0;
@@ -1797,8 +1798,17 @@ w83781d_isa_found(unsigned short address)
{
int val, save, found = 0;
- if (!request_region(address, W83781D_EXTENT, "w83781d"))
+ /* We have to request the region in two parts because some
+ boards declare base+4 to base+7 as a PNP device */
+ if (!request_region(address, 4, "w83781d")) {
+ pr_debug("w83781d: Failed to request low part of region\n");
return 0;
+ }
+ if (!request_region(address + 4, 4, "w83781d")) {
+ pr_debug("w83781d: Failed to request high part of region\n");
+ release_region(address, 4);
+ return 0;
+ }
#define REALLY_SLOW_IO
/* We need the timeouts for at least some W83781D-like
@@ -1871,7 +1881,8 @@ w83781d_isa_found(unsigned short address)
val == 0x30 ? "W83782D" : "W83781D", (int)address);
release:
- release_region(address, W83781D_EXTENT);
+ release_region(address + 4, 4);
+ release_region(address, 4);
return found;
}
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 476b0bb72d6..5fa9c3c67e0 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -100,7 +100,7 @@ config I2C_AU1550
config I2C_BLACKFIN_TWI
tristate "Blackfin TWI I2C support"
- depends on BF534 || BF536 || BF537 || BF54x
+ depends on BF534 || BF536 || BF537
help
This is the TWI I2C device driver for Blackfin 534/536/537/54x.
This driver can also be built as a module. If so, the module
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index da6639707ea..7ba31770d77 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -128,6 +128,8 @@ struct omap_i2c_dev {
size_t buf_len;
struct i2c_adapter adapter;
unsigned rev1:1;
+ unsigned idle:1;
+ u16 iestate; /* Saved interrupt register */
};
static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev,
@@ -174,18 +176,30 @@ static void omap_i2c_put_clocks(struct omap_i2c_dev *dev)
}
}
-static void omap_i2c_enable_clocks(struct omap_i2c_dev *dev)
+static void omap_i2c_unidle(struct omap_i2c_dev *dev)
{
if (dev->iclk != NULL)
clk_enable(dev->iclk);
clk_enable(dev->fclk);
+ if (dev->iestate)
+ omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
+ dev->idle = 0;
}
-static void omap_i2c_disable_clocks(struct omap_i2c_dev *dev)
+static void omap_i2c_idle(struct omap_i2c_dev *dev)
{
+ u16 iv;
+
+ dev->idle = 1;
+ dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
+ omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
+ if (dev->rev1)
+ iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG); /* Read clears */
+ else
+ omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, dev->iestate);
+ clk_disable(dev->fclk);
if (dev->iclk != NULL)
clk_disable(dev->iclk);
- clk_disable(dev->fclk);
}
static int omap_i2c_init(struct omap_i2c_dev *dev)
@@ -360,7 +374,7 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
int i;
int r;
- omap_i2c_enable_clocks(dev);
+ omap_i2c_unidle(dev);
if ((r = omap_i2c_wait_for_bb(dev)) < 0)
goto out;
@@ -374,7 +388,7 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
if (r == 0)
r = num;
out:
- omap_i2c_disable_clocks(dev);
+ omap_i2c_idle(dev);
return r;
}
@@ -403,6 +417,9 @@ omap_i2c_rev1_isr(int this_irq, void *dev_id)
struct omap_i2c_dev *dev = dev_id;
u16 iv, w;
+ if (dev->idle)
+ return IRQ_NONE;
+
iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG);
switch (iv) {
case 0x00: /* None */
@@ -457,6 +474,9 @@ omap_i2c_isr(int this_irq, void *dev_id)
u16 stat, w;
int count = 0;
+ if (dev->idle)
+ return IRQ_NONE;
+
bits = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
while ((stat = (omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG))) & bits) {
dev_dbg(dev->dev, "IRQ (ISR = 0x%04x)\n", stat);
@@ -575,7 +595,7 @@ omap_i2c_probe(struct platform_device *pdev)
if ((r = omap_i2c_get_clocks(dev)) != 0)
goto err_free_mem;
- omap_i2c_enable_clocks(dev);
+ omap_i2c_unidle(dev);
if (cpu_is_omap15xx())
dev->rev1 = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) < 0x20;
@@ -610,7 +630,7 @@ omap_i2c_probe(struct platform_device *pdev)
goto err_free_irq;
}
- omap_i2c_disable_clocks(dev);
+ omap_i2c_idle(dev);
return 0;
@@ -618,7 +638,7 @@ err_free_irq:
free_irq(dev->irq, dev);
err_unuse_clocks:
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
- omap_i2c_disable_clocks(dev);
+ omap_i2c_idle(dev);
omap_i2c_put_clocks(dev);
err_free_mem:
platform_set_drvdata(pdev, NULL);
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index fd84b2a3633..8b645c6b2cb 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -489,8 +489,8 @@ EXPORT_SYMBOL(i2c_add_adapter);
* Context: can sleep
*
* This routine is used to declare an I2C adapter when its bus number
- * matters. Example: for I2C adapters from system-on-chip CPUs, or
- * otherwise built in to the system's mainboard, and where i2c_board_info
+ * matters. For example, use it for I2C adapters from system-on-chip CPUs,
+ * or otherwise built in to the system's mainboard, and where i2c_board_info
* is used to properly configure I2C devices.
*
* If no devices have pre-been declared for this bus, then be sure to
diff --git a/drivers/ide/arm/ide_arm.c b/drivers/ide/arm/ide_arm.c
index 43a70e91363..be9ff7334c5 100644
--- a/drivers/ide/arm/ide_arm.c
+++ b/drivers/ide/arm/ide_arm.c
@@ -46,3 +46,5 @@ static int __init ide_arm_init(void)
}
module_init(ide_arm_init);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c
index e79bf8f9b7d..c8ffbaf29a8 100644
--- a/drivers/ide/cris/ide-cris.c
+++ b/drivers/ide/cris/ide-cris.c
@@ -1067,3 +1067,5 @@ static void cris_dma_start(ide_drive_t *drive)
}
module_init(init_e100_ide);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c
index 520aec07570..4108ec4ffa7 100644
--- a/drivers/ide/h8300/ide-h8300.c
+++ b/drivers/ide/h8300/ide-h8300.c
@@ -110,6 +110,7 @@ static int __init h8300_ide_init(void)
ide_init_port_data(hwif, index);
ide_init_port_hw(hwif, &hw);
hwif_setup(hwif);
+ hwif->host_flags = IDE_HFLAG_NO_IO_32BIT;
printk(KERN_INFO "ide%d: H8/300 generic IDE interface\n", index);
idx[0] = index;
@@ -125,3 +126,5 @@ out_busy:
}
module_init(h8300_ide_init);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index c419266234a..e77cee0e5d6 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -595,6 +595,7 @@ u8 eighty_ninty_three (ide_drive_t *drive)
/*
* FIXME:
+ * - change master/slave IDENTIFY order
* - force bit13 (80c cable present) check also for !ivb devices
* (unless the slave device is pre-ATA3)
*/
@@ -657,7 +658,7 @@ int ide_driveid_update(ide_drive_t *drive)
local_irq_restore(flags);
return 0;
}
- ata_input_data(drive, id, SECTOR_WORDS);
+ hwif->ata_input_data(drive, id, SECTOR_WORDS);
(void)ide_read_status(drive); /* clear drive IRQ */
local_irq_enable();
local_irq_restore(flags);
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index 29e2c9719c3..7031a8dcf69 100644
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -122,7 +122,6 @@ static struct ide_pio_info {
const char *name;
int pio;
} ide_pio_blacklist [] = {
-/* { "Conner Peripherals 1275MB - CFS1275A", 4 }, */
{ "Conner Peripherals 540MB - CFS540A", 3 },
{ "WDC AC2700", 3 },
@@ -138,10 +137,8 @@ static struct ide_pio_info {
{ "WDC AC1170", 1 },
{ "WDC AC1210", 1 },
{ "WDC AC280", 0 },
-/* { "WDC AC21000", 4 }, */
{ "WDC AC31000", 3 },
{ "WDC AC31200", 3 },
-/* { "WDC AC31600", 4 }, */
{ "Maxtor 7131 AT", 1 },
{ "Maxtor 7171 AT", 1 },
@@ -155,13 +152,6 @@ static struct ide_pio_info {
{ "SAMSUNG SHD-3122A", 1 },
{ "SAMSUNG SHD-3172A", 1 },
-/* { "ST51080A", 4 },
- * { "ST51270A", 4 },
- * { "ST31220A", 4 },
- * { "ST31640A", 4 },
- * { "ST32140A", 4 },
- * { "ST3780A", 4 },
- */
{ "ST5660A", 3 },
{ "ST3660A", 3 },
{ "ST3630A", 3 },
diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c
index b163b2e5221..c14bb5380c2 100644
--- a/drivers/ide/ide-pnp.c
+++ b/drivers/ide/ide-pnp.c
@@ -86,3 +86,5 @@ static void __exit pnpide_exit(void)
module_init(pnpide_init);
module_exit(pnpide_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 194ecb0049e..47a114927c3 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -774,9 +774,10 @@ static int ide_probe_port(ide_hwif_t *hwif)
printk(KERN_DEBUG "%s: Wait for ready failed before probe !\n", hwif->name);
/*
- * Need to probe slave device first to make it release PDIAG-.
+ * Second drive should only exist if first drive was found,
+ * but a lot of cdrom drives are configured as single slaves.
*/
- for (unit = MAX_DRIVES - 1; unit >= 0; unit--) {
+ for (unit = 0; unit < MAX_DRIVES; ++unit) {
ide_drive_t *drive = &hwif->drives[unit];
drive->dn = (hwif->channel ? 2 : 0) + unit;
(void) probe_for_drive(drive);
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 43e0e055777..0598ecfd5f3 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -3765,11 +3765,6 @@ static int ide_tape_probe(ide_drive_t *drive)
g->fops = &idetape_block_ops;
ide_register_region(g);
- printk(KERN_WARNING "It is possible that this driver does not have any"
- " users anymore and, as a result, it will be REMOVED soon."
- " Please notify Bart <bzolnier@gmail.com> or Boris"
- " <petkovbb@gmail.com> in case you still need it.\n");
-
return 0;
out_free_tape:
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index 0518a2e948c..4c86a8d84b4 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -423,6 +423,25 @@ void task_end_request(ide_drive_t *drive, struct request *rq, u8 stat)
}
/*
+ * We got an interrupt on a task_in case, but no errors and no DRQ.
+ *
+ * It might be a spurious irq (shared irq), but it might be a
+ * command that had no output.
+ */
+static ide_startstop_t task_in_unexpected(ide_drive_t *drive, struct request *rq, u8 stat)
+{
+ /* Command all done? */
+ if (OK_STAT(stat, READY_STAT, BUSY_STAT)) {
+ task_end_request(drive, rq, stat);
+ return ide_stopped;
+ }
+
+ /* Assume it was a spurious irq */
+ ide_set_handler(drive, &task_in_intr, WAIT_WORSTCASE, NULL);
+ return ide_started;
+}
+
+/*
* Handler for command with PIO data-in phase (Read/Read Multiple).
*/
static ide_startstop_t task_in_intr(ide_drive_t *drive)
@@ -431,18 +450,17 @@ static ide_startstop_t task_in_intr(ide_drive_t *drive)
struct request *rq = HWGROUP(drive)->rq;
u8 stat = ide_read_status(drive);
- /* new way for dealing with premature shared PCI interrupts */
- if (!OK_STAT(stat, DRQ_STAT, BAD_R_STAT)) {
- if (stat & (ERR_STAT | DRQ_STAT))
- return task_error(drive, rq, __FUNCTION__, stat);
- /* No data yet, so wait for another IRQ. */
- ide_set_handler(drive, &task_in_intr, WAIT_WORSTCASE, NULL);
- return ide_started;
- }
+ /* Error? */
+ if (stat & ERR_STAT)
+ return task_error(drive, rq, __FUNCTION__, stat);
+
+ /* Didn't want any data? Odd. */
+ if (!(stat & DRQ_STAT))
+ return task_in_unexpected(drive, rq, stat);
ide_pio_datablock(drive, rq, 0);
- /* If it was the last datablock check status and finish transfer. */
+ /* Are we done? Check status and finish transfer. */
if (!hwif->nleft) {
stat = wait_drive_not_busy(drive);
if (!OK_STAT(stat, 0, BAD_STAT))
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 9976f9d627d..fc69fe2e3ec 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -1258,7 +1258,7 @@ static int __init ide_setup(char *s)
drive = &hwif->drives[unit];
if (strncmp(s + 4, "ide-", 4) == 0) {
strlcpy(drive->driver_req, s + 4, sizeof(drive->driver_req));
- goto done;
+ goto obsolete_option;
}
switch (match_parm(&s[3], hd_words, vals, 3)) {
case -1: /* "none" */
@@ -1290,13 +1290,13 @@ static int __init ide_setup(char *s)
goto done;
case -12: /* "remap" */
drive->remap_0_to_1 = 1;
- goto done;
+ goto obsolete_option;
case -13: /* "remap63" */
drive->sect0 = 63;
- goto done;
+ goto obsolete_option;
case -14: /* "scsi" */
drive->scsi = 1;
- goto done;
+ goto obsolete_option;
case 3: /* cyl,head,sect */
drive->media = ide_disk;
drive->ready_stat = READY_STAT;
@@ -1370,32 +1370,32 @@ static int __init ide_setup(char *s)
#ifdef CONFIG_BLK_DEV_ALI14XX
case -17: /* "ali14xx" */
probe_ali14xx = 1;
- goto done;
+ goto obsolete_option;
#endif
#ifdef CONFIG_BLK_DEV_UMC8672
case -16: /* "umc8672" */
probe_umc8672 = 1;
- goto done;
+ goto obsolete_option;
#endif
#ifdef CONFIG_BLK_DEV_DTC2278
case -15: /* "dtc2278" */
probe_dtc2278 = 1;
- goto done;
+ goto obsolete_option;
#endif
#ifdef CONFIG_BLK_DEV_CMD640
case -14: /* "cmd640_vlb" */
cmd640_vlb = 1;
- goto done;
+ goto obsolete_option;
#endif
#ifdef CONFIG_BLK_DEV_HT6560B
case -13: /* "ht6560b" */
probe_ht6560b = 1;
- goto done;
+ goto obsolete_option;
#endif
#ifdef CONFIG_BLK_DEV_QD65XX
case -12: /* "qd65xx" */
probe_qd65xx = 1;
- goto done;
+ goto obsolete_option;
#endif
#ifdef CONFIG_BLK_DEV_4DRIVES
case -11: /* "four" drives on one set of ports */
diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/legacy/buddha.c
index 50ffa871d5e..fdd3791e465 100644
--- a/drivers/ide/legacy/buddha.c
+++ b/drivers/ide/legacy/buddha.c
@@ -241,3 +241,5 @@ fail_base2:
}
module_init(buddha_init);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c
index 8949ce71bdd..e950afa5939 100644
--- a/drivers/ide/legacy/falconide.c
+++ b/drivers/ide/legacy/falconide.c
@@ -93,3 +93,5 @@ static int __init falconide_init(void)
}
module_init(falconide_init);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c
index b7d81090d5d..e3b4638cc88 100644
--- a/drivers/ide/legacy/gayle.c
+++ b/drivers/ide/legacy/gayle.c
@@ -195,3 +195,5 @@ found:
}
module_init(gayle_init);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c
index 9a79098d9eb..eaf5dbe58bc 100644
--- a/drivers/ide/legacy/macide.c
+++ b/drivers/ide/legacy/macide.c
@@ -137,3 +137,5 @@ static int __init macide_init(void)
}
module_init(macide_init);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c
index 1381b91bc31..2da28759686 100644
--- a/drivers/ide/legacy/q40ide.c
+++ b/drivers/ide/legacy/q40ide.c
@@ -153,3 +153,5 @@ static int __init q40ide_init(void)
}
module_init(q40ide_init);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c
index ec667982809..29fbc5ead03 100644
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -881,3 +881,5 @@ module_param_named(probe_vlb, cmd640_vlb, bool, 0);
MODULE_PARM_DESC(probe_vlb, "probe for VLB version of CMD640 chipset");
module_init(cmd640x_init);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c
index 38fbfb8d544..ebaba01c755 100644
--- a/drivers/ide/ppc/mpc8xx.c
+++ b/drivers/ide/ppc/mpc8xx.c
@@ -853,3 +853,5 @@ static int __init mpc8xx_ide_probe(void)
}
module_init(mpc8xx_ide_probe);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 78c9eeb8563..d9ca52e6cda 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -1771,3 +1771,5 @@ static int __devinit pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
module_init(pmac_ide_probe);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/infiniband/core/addr.c b/drivers/infiniband/core/addr.c
index a58ad8a470f..781ea595037 100644
--- a/drivers/infiniband/core/addr.c
+++ b/drivers/infiniband/core/addr.c
@@ -154,7 +154,7 @@ static void addr_send_arp(struct sockaddr_in *dst_in)
{
struct rtable *rt;
struct flowi fl;
- u32 dst_ip = dst_in->sin_addr.s_addr;
+ __be32 dst_ip = dst_in->sin_addr.s_addr;
memset(&fl, 0, sizeof fl);
fl.nl_u.ip4_u.daddr = dst_ip;
@@ -169,8 +169,8 @@ static int addr_resolve_remote(struct sockaddr_in *src_in,
struct sockaddr_in *dst_in,
struct rdma_dev_addr *addr)
{
- u32 src_ip = src_in->sin_addr.s_addr;
- u32 dst_ip = dst_in->sin_addr.s_addr;
+ __be32 src_ip = src_in->sin_addr.s_addr;
+ __be32 dst_ip = dst_in->sin_addr.s_addr;
struct flowi fl;
struct rtable *rt;
struct neighbour *neigh;
@@ -257,7 +257,7 @@ static int addr_resolve_local(struct sockaddr_in *src_in,
struct rdma_dev_addr *addr)
{
struct net_device *dev;
- u32 src_ip = src_in->sin_addr.s_addr;
+ __be32 src_ip = src_in->sin_addr.s_addr;
__be32 dst_ip = dst_in->sin_addr.s_addr;
int ret;
diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c
index 4df40515708..faa7ce318a6 100644
--- a/drivers/infiniband/core/cm.c
+++ b/drivers/infiniband/core/cm.c
@@ -393,7 +393,7 @@ static int cm_alloc_id(struct cm_id_private *cm_id_priv)
spin_unlock_irqrestore(&cm.lock, flags);
} while( (ret == -EAGAIN) && idr_pre_get(&cm.local_id_table, GFP_KERNEL) );
- cm_id_priv->id.local_id = (__force __be32) (id ^ cm.random_id_operand);
+ cm_id_priv->id.local_id = (__force __be32)id ^ cm.random_id_operand;
return ret;
}
diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index 34507daaf9b..d81c156a22b 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -168,15 +168,15 @@ struct cma_work {
union cma_ip_addr {
struct in6_addr ip6;
struct {
- __u32 pad[3];
- __u32 addr;
+ __be32 pad[3];
+ __be32 addr;
} ip4;
};
struct cma_hdr {
u8 cma_version;
u8 ip_version; /* IP version: 7:4 */
- __u16 port;
+ __be16 port;
union cma_ip_addr src_addr;
union cma_ip_addr dst_addr;
};
@@ -186,8 +186,8 @@ struct sdp_hh {
u8 sdp_version; /* Major version: 7:4 */
u8 ip_version; /* IP version: 7:4 */
u8 sdp_specific1[10];
- __u16 port;
- __u16 sdp_specific2;
+ __be16 port;
+ __be16 sdp_specific2;
union cma_ip_addr src_addr;
union cma_ip_addr dst_addr;
};
@@ -663,7 +663,7 @@ static inline int cma_any_port(struct sockaddr *addr)
}
static int cma_get_net_info(void *hdr, enum rdma_port_space ps,
- u8 *ip_ver, __u16 *port,
+ u8 *ip_ver, __be16 *port,
union cma_ip_addr **src, union cma_ip_addr **dst)
{
switch (ps) {
@@ -695,7 +695,7 @@ static int cma_get_net_info(void *hdr, enum rdma_port_space ps,
static void cma_save_net_info(struct rdma_addr *addr,
struct rdma_addr *listen_addr,
- u8 ip_ver, __u16 port,
+ u8 ip_ver, __be16 port,
union cma_ip_addr *src, union cma_ip_addr *dst)
{
struct sockaddr_in *listen4, *ip4;
@@ -996,7 +996,7 @@ static struct rdma_id_private *cma_new_conn_id(struct rdma_cm_id *listen_id,
struct rdma_cm_id *id;
struct rdma_route *rt;
union cma_ip_addr *src, *dst;
- __u16 port;
+ __be16 port;
u8 ip_ver;
if (cma_get_net_info(ib_event->private_data, listen_id->ps,
@@ -1043,7 +1043,7 @@ static struct rdma_id_private *cma_new_udp_id(struct rdma_cm_id *listen_id,
struct rdma_id_private *id_priv;
struct rdma_cm_id *id;
union cma_ip_addr *src, *dst;
- __u16 port;
+ __be16 port;
u8 ip_ver;
int ret;
@@ -1165,7 +1165,7 @@ static void cma_set_compare_data(enum rdma_port_space ps, struct sockaddr *addr,
{
struct cma_hdr *cma_data, *cma_mask;
struct sdp_hh *sdp_data, *sdp_mask;
- __u32 ip4_addr;
+ __be32 ip4_addr;
struct in6_addr ip6_addr;
memset(compare, 0, sizeof *compare);
@@ -1181,12 +1181,12 @@ static void cma_set_compare_data(enum rdma_port_space ps, struct sockaddr *addr,
sdp_set_ip_ver(sdp_data, 4);
sdp_set_ip_ver(sdp_mask, 0xF);
sdp_data->dst_addr.ip4.addr = ip4_addr;
- sdp_mask->dst_addr.ip4.addr = ~0;
+ sdp_mask->dst_addr.ip4.addr = htonl(~0);
} else {
cma_set_ip_ver(cma_data, 4);
cma_set_ip_ver(cma_mask, 0xF);
cma_data->dst_addr.ip4.addr = ip4_addr;
- cma_mask->dst_addr.ip4.addr = ~0;
+ cma_mask->dst_addr.ip4.addr = htonl(~0);
}
break;
case AF_INET6:
diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.c b/drivers/infiniband/hw/cxgb3/iwch_cm.c
index 320f2b6ddee..99f2f2a46bf 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_cm.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_cm.c
@@ -1745,7 +1745,7 @@ int iwch_accept_cr(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
/* bind QP to EP and move to RTS */
attrs.mpa_attr = ep->mpa_attr;
- attrs.max_ird = ep->ord;
+ attrs.max_ird = ep->ird;
attrs.max_ord = ep->ord;
attrs.llp_stream_handle = ep;
attrs.next_state = IWCH_QP_STATE_RTS;
diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c
index 39adb267fb1..0bef878e0f6 100644
--- a/drivers/infiniband/hw/nes/nes_cm.c
+++ b/drivers/infiniband/hw/nes/nes_cm.c
@@ -40,6 +40,7 @@
#include <linux/tcp.h>
#include <linux/init.h>
#include <linux/if_arp.h>
+#include <linux/if_vlan.h>
#include <linux/notifier.h>
#include <linux/net.h>
#include <linux/types.h>
@@ -1072,7 +1073,7 @@ static struct nes_cm_node *make_cm_node(struct nes_cm_core *cm_core,
ts = current_kernel_time();
cm_node->tcp_cntxt.loc_seq_num = htonl(ts.tv_nsec);
cm_node->tcp_cntxt.mss = nesvnic->max_frame_size - sizeof(struct iphdr) -
- sizeof(struct tcphdr) - ETH_HLEN;
+ sizeof(struct tcphdr) - ETH_HLEN - VLAN_HLEN;
cm_node->tcp_cntxt.rcv_nxt = 0;
/* get a unique session ID , add thread_id to an upcounter to handle race */
atomic_inc(&cm_core->node_cnt);
diff --git a/drivers/input/apm-power.c b/drivers/input/apm-power.c
index c36d110b349..7d61a966080 100644
--- a/drivers/input/apm-power.c
+++ b/drivers/input/apm-power.c
@@ -63,8 +63,6 @@ static int apmpower_connect(struct input_handler *handler,
handle->handler = handler;
handle->name = "apm-power";
- handler->private = handle;
-
error = input_register_handle(handle);
if (error) {
printk(KERN_ERR
@@ -87,11 +85,10 @@ static int apmpower_connect(struct input_handler *handler,
return 0;
}
-static void apmpower_disconnect(struct input_handle *handler)
+static void apmpower_disconnect(struct input_handle *handle)
{
- struct input_handle *handle = handler->private;
-
input_close_device(handle);
+ input_unregister_handle(handle);
kfree(handle);
}
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 0727b0a1255..b32984bc516 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -124,6 +124,7 @@ static void evdev_free(struct device *dev)
{
struct evdev *evdev = container_of(dev, struct evdev, dev);
+ input_put_device(evdev->handle.dev);
kfree(evdev);
}
@@ -893,7 +894,7 @@ static int evdev_connect(struct input_handler *handler, struct input_dev *dev,
evdev->exist = 1;
evdev->minor = minor;
- evdev->handle.dev = dev;
+ evdev->handle.dev = input_get_device(dev);
evdev->handle.name = evdev->name;
evdev->handle.handler = handler;
evdev->handle.private = evdev;
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index 22b2789ef58..65d7077a75a 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -171,6 +171,7 @@ static void joydev_free(struct device *dev)
{
struct joydev *joydev = container_of(dev, struct joydev, dev);
+ input_put_device(joydev->handle.dev);
kfree(joydev);
}
@@ -750,7 +751,7 @@ static int joydev_connect(struct input_handler *handler, struct input_dev *dev,
joydev->minor = minor;
joydev->exist = 1;
- joydev->handle.dev = dev;
+ joydev->handle.dev = input_get_device(dev);
joydev->handle.name = joydev->name;
joydev->handle.handler = handler;
joydev->handle.private = joydev;
diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
index 6224c2fb3b6..4e651c11c1d 100644
--- a/drivers/input/keyboard/pxa27x_keypad.c
+++ b/drivers/input/keyboard/pxa27x_keypad.c
@@ -50,9 +50,9 @@
#define KPKDI 0x0048
/* bit definitions */
-#define KPC_MKRN(n) ((((n) & 0x7) - 1) << 26) /* matrix key row number */
-#define KPC_MKCN(n) ((((n) & 0x7) - 1) << 23) /* matrix key column number */
-#define KPC_DKN(n) ((((n) & 0x7) - 1) << 6) /* direct key number */
+#define KPC_MKRN(n) ((((n) - 1) & 0x7) << 26) /* matrix key row number */
+#define KPC_MKCN(n) ((((n) - 1) & 0x7) << 23) /* matrix key column number */
+#define KPC_DKN(n) ((((n) - 1) & 0x7) << 6) /* direct key number */
#define KPC_AS (0x1 << 30) /* Automatic Scan bit */
#define KPC_ASACT (0x1 << 29) /* Automatic Scan on Activity */
diff --git a/drivers/input/misc/cobalt_btns.c b/drivers/input/misc/cobalt_btns.c
index 4833b1a8262..5511ef006a6 100644
--- a/drivers/input/misc/cobalt_btns.c
+++ b/drivers/input/misc/cobalt_btns.c
@@ -1,7 +1,7 @@
/*
* Cobalt button interface driver.
*
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,7 +15,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/init.h>
#include <linux/input-polldev.h>
@@ -55,7 +55,7 @@ static void handle_buttons(struct input_polled_dev *dev)
status = ~readl(bdev->reg) >> 24;
for (i = 0; i < ARRAY_SIZE(bdev->keymap); i++) {
- if (status & (1UL << i)) {
+ if (status & (1U << i)) {
if (++bdev->count[i] == BUTTONS_COUNT_THRESHOLD) {
input_event(input, EV_MSC, MSC_SCAN, i);
input_report_key(input, bdev->keymap[i], 1);
@@ -97,16 +97,16 @@ static int __devinit cobalt_buttons_probe(struct platform_device *pdev)
input->name = "Cobalt buttons";
input->phys = "cobalt/input0";
input->id.bustype = BUS_HOST;
- input->cdev.dev = &pdev->dev;
+ input->dev.parent = &pdev->dev;
- input->keycode = pdev->keymap;
- input->keycodemax = ARRAY_SIZE(pdev->keymap);
+ input->keycode = bdev->keymap;
+ input->keycodemax = ARRAY_SIZE(bdev->keymap);
input->keycodesize = sizeof(unsigned short);
input_set_capability(input, EV_MSC, MSC_SCAN);
__set_bit(EV_KEY, input->evbit);
- for (i = 0; i < ARRAY_SIZE(buttons_map); i++)
- __set_bit(input->keycode[i], input->keybit);
+ for (i = 0; i < ARRAY_SIZE(cobalt_map); i++)
+ __set_bit(bdev->keymap[i], input->keybit);
__clear_bit(KEY_RESERVED, input->keybit);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
diff --git a/drivers/input/misc/ixp4xx-beeper.c b/drivers/input/misc/ixp4xx-beeper.c
index d2ade7443b7..798d84c44d0 100644
--- a/drivers/input/misc/ixp4xx-beeper.c
+++ b/drivers/input/misc/ixp4xx-beeper.c
@@ -25,6 +25,7 @@
MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
MODULE_DESCRIPTION("ixp4xx beeper driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ixp4xx-beeper");
static DEFINE_SPINLOCK(beep_lock);
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index b346a3b418e..385e32bcf6a 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -116,8 +116,8 @@ static void alps_process_packet(struct psmouse *psmouse)
}
if (priv->i->flags & ALPS_FW_BK_1) {
- back = packet[2] & 4;
- forward = packet[0] & 0x10;
+ back = packet[0] & 0x10;
+ forward = packet[2] & 4;
}
if (priv->i->flags & ALPS_FW_BK_2) {
@@ -483,6 +483,7 @@ int alps_init(struct psmouse *psmouse)
dev2->id.vendor = 0x0002;
dev2->id.product = PSMOUSE_ALPS;
dev2->id.version = 0x0000;
+ dev2->dev.parent = &psmouse->ps2dev.serio->dev;
dev2->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
dev2->relbit[BIT_WORD(REL_X)] |= BIT_MASK(REL_X) | BIT_MASK(REL_Y);
diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c
index bbbe5e81adc..b989748598a 100644
--- a/drivers/input/mousedev.c
+++ b/drivers/input/mousedev.c
@@ -414,6 +414,7 @@ static void mousedev_free(struct device *dev)
{
struct mousedev *mousedev = container_of(dev, struct mousedev, dev);
+ input_put_device(mousedev->handle.dev);
kfree(mousedev);
}
@@ -865,7 +866,7 @@ static struct mousedev *mousedev_create(struct input_dev *dev,
mousedev->minor = minor;
mousedev->exist = 1;
- mousedev->handle.dev = dev;
+ mousedev->handle.dev = input_get_device(dev);
mousedev->handle.name = mousedev->name;
mousedev->handle.handler = handler;
mousedev->handle.private = mousedev;
diff --git a/drivers/input/serio/i8042-snirm.h b/drivers/input/serio/i8042-snirm.h
new file mode 100644
index 00000000000..409a9341143
--- /dev/null
+++ b/drivers/input/serio/i8042-snirm.h
@@ -0,0 +1,75 @@
+#ifndef _I8042_SNIRM_H
+#define _I8042_SNIRM_H
+
+#include <asm/sni.h>
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+/*
+ * Names.
+ */
+
+#define I8042_KBD_PHYS_DESC "onboard/serio0"
+#define I8042_AUX_PHYS_DESC "onboard/serio1"
+#define I8042_MUX_PHYS_DESC "onboard/serio%d"
+
+/*
+ * IRQs.
+ */
+static int i8042_kbd_irq;
+static int i8042_aux_irq;
+#define I8042_KBD_IRQ i8042_kbd_irq
+#define I8042_AUX_IRQ i8042_aux_irq
+
+static void __iomem *kbd_iobase;
+
+#define I8042_COMMAND_REG (kbd_iobase + 0x64UL)
+#define I8042_DATA_REG (kbd_iobase + 0x60UL)
+
+static inline int i8042_read_data(void)
+{
+ return readb(kbd_iobase + 0x60UL);
+}
+
+static inline int i8042_read_status(void)
+{
+ return readb(kbd_iobase + 0x64UL);
+}
+
+static inline void i8042_write_data(int val)
+{
+ writeb(val, kbd_iobase + 0x60UL);
+}
+
+static inline void i8042_write_command(int val)
+{
+ writeb(val, kbd_iobase + 0x64UL);
+}
+static inline int i8042_platform_init(void)
+{
+ /* RM200 is strange ... */
+ if (sni_brd_type == SNI_BRD_RM200) {
+ kbd_iobase = ioremap(0x16000000, 4);
+ i8042_kbd_irq = 33;
+ i8042_aux_irq = 44;
+ } else {
+ kbd_iobase = ioremap(0x14000000, 4);
+ i8042_kbd_irq = 1;
+ i8042_aux_irq = 12;
+ }
+ if (!kbd_iobase)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static inline void i8042_platform_exit(void)
+{
+
+}
+
+#endif /* _I8042_SNIRM_H */
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 662e84482c2..60931aceb82 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -277,6 +277,13 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "M636/A737 platform"),
},
},
+ {
+ .ident = "Lenovo 3000 n100",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "3000 N100"),
+ },
+ },
{ }
};
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 2763394869d..65a74cfc187 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -1151,7 +1151,6 @@ static int __devinit i8042_setup_kbd(void)
static int __devinit i8042_probe(struct platform_device *dev)
{
int error;
- char param;
error = i8042_controller_selftest();
if (error)
@@ -1174,7 +1173,7 @@ static int __devinit i8042_probe(struct platform_device *dev)
}
#ifdef CONFIG_X86
if (i8042_dritek) {
- param = 0x90;
+ char param = 0x90;
error = i8042_command(&param, 0x1059);
if (error)
goto out_fail;
diff --git a/drivers/input/serio/i8042.h b/drivers/input/serio/i8042.h
index c972e5d03a3..cbc1beb6657 100644
--- a/drivers/input/serio/i8042.h
+++ b/drivers/input/serio/i8042.h
@@ -18,6 +18,8 @@
#include "i8042-jazzio.h"
#elif defined(CONFIG_SGI_HAS_I8042)
#include "i8042-ip22io.h"
+#elif defined(CONFIG_SNI_RM)
+#include "i8042-snirm.h"
#elif defined(CONFIG_PPC)
#include "i8042-ppcio.h"
#elif defined(CONFIG_SPARC)
diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h
index 6542edb6f76..acf9830698c 100644
--- a/drivers/input/tablet/wacom.h
+++ b/drivers/input/tablet/wacom.h
@@ -11,7 +11,7 @@
* Copyright (c) 2000 Daniel Egger <egger@suse.de>
* Copyright (c) 2001 Frederic Lepied <flepied@mandrakesoft.com>
* Copyright (c) 2004 Panagiotis Issaris <panagiotis.issaris@mech.kuleuven.ac.be>
- * Copyright (c) 2002-2007 Ping Cheng <pingc@wacom.com>
+ * Copyright (c) 2002-2008 Ping Cheng <pingc@wacom.com>
*
* ChangeLog:
* v0.1 (vp) - Initial release
@@ -65,6 +65,7 @@
* - and wacom_wac.c deals with Wacom specific code
* - Support Intuos3 4x6
* v1.47 (pc) - Added support for Bamboo
+ * v1.48 (pc) - Added support for Bamboo1, BambooFun, and Cintiq 12WX
*/
/*
@@ -85,7 +86,7 @@
/*
* Version Information
*/
-#define DRIVER_VERSION "v1.47"
+#define DRIVER_VERSION "v1.48"
#define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
#define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver"
#define DRIVER_LICENSE "GPL"
@@ -125,6 +126,7 @@ extern void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac
extern void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
extern void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
extern void input_dev_mo(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
+extern void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
extern __u16 wacom_le16_to_cpu(unsigned char *data);
extern __u16 wacom_be16_to_cpu(unsigned char *data);
extern struct wacom_features * get_wacom_feature(const struct usb_device_id *id);
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index d64b1ea136b..41caaef8e2d 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -171,6 +171,7 @@ void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_0) |
BIT_MASK(BTN_1) | BIT_MASK(BTN_2) | BIT_MASK(BTN_3);
input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
+ input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
}
void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
@@ -180,6 +181,11 @@ void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
}
+void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
+{
+ input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_8) | BIT_MASK(BTN_9);
+}
+
void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
input_dev->evbit[0] |= BIT_MASK(EV_MSC) | BIT_MASK(EV_REL);
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index fc03ba256f4..ffe33842143 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -163,7 +163,9 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
}
id = STYLUS_DEVICE_ID;
- if (data[1] & 0x80) { /* in prox */
+ if ((data[1] & 0x80) && ((data[1] & 0x07) || data[2] || data[3] || data[4]
+ || data[5] || data[6] || (data[7] & 0x07))) {
+ /* in prox and not a pad data */
switch ((data[1] >> 5) & 3) {
@@ -233,7 +235,6 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
if (data[7] & 0xf8) {
wacom_input_sync(wcombo); /* sync last event */
wacom->id[1] = 1;
- wacom->serial[1] = (data[7] & 0xf8);
wacom_report_key(wcombo, BTN_0, (data[7] & 0x40));
wacom_report_key(wcombo, BTN_4, (data[7] & 0x80));
rw = ((data[7] & 0x18) >> 3) - ((data[7] & 0x20) >> 3);
@@ -252,10 +253,9 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
}
break;
case WACOM_MO:
- if ((data[7] & 0xf8) || (data[8] & 0x80)) {
+ if ((data[7] & 0xf8) || (data[8] & 0xff)) {
wacom_input_sync(wcombo); /* sync last event */
wacom->id[1] = 1;
- wacom->serial[1] = (data[7] & 0xf8);
wacom_report_key(wcombo, BTN_0, (data[7] & 0x08));
wacom_report_key(wcombo, BTN_1, (data[7] & 0x20));
wacom_report_key(wcombo, BTN_4, (data[7] & 0x10));
@@ -434,10 +434,12 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
wacom_report_key(wcombo, BTN_5, (data[6] & 0x02));
wacom_report_key(wcombo, BTN_6, (data[6] & 0x04));
wacom_report_key(wcombo, BTN_7, (data[6] & 0x08));
+ wacom_report_key(wcombo, BTN_8, (data[5] & 0x10));
+ wacom_report_key(wcombo, BTN_9, (data[6] & 0x10));
wacom_report_abs(wcombo, ABS_RX, ((data[1] & 0x1f) << 8) | data[2]);
wacom_report_abs(wcombo, ABS_RY, ((data[3] & 0x1f) << 8) | data[4]);
- if((data[5] & 0x0f) | (data[6] & 0x0f) | (data[1] & 0x1f) |
+ if ((data[5] & 0x1f) | (data[6] & 0x1f) | (data[1] & 0x1f) |
data[2] | (data[3] & 0x1f) | data[4])
wacom_report_key(wcombo, wacom->tool[1], 1);
else
@@ -481,13 +483,11 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
if (data[1] & 0x02) {
/* Rotation packet */
if (wacom->features->type >= INTUOS3S) {
- /* I3 marker pen rotation reported as wheel
- * due to valuator limitation
- */
+ /* I3 marker pen rotation */
t = (data[6] << 3) | ((data[7] >> 5) & 7);
t = (data[7] & 0x20) ? ((t > 900) ? ((t-1) / 2 - 1350) :
((t-1) / 2 + 450)) : (450 - t / 2) ;
- wacom_report_abs(wcombo, ABS_WHEEL, t);
+ wacom_report_abs(wcombo, ABS_Z, t);
} else {
/* 4D mouse rotation packet */
t = (data[6] << 3) | ((data[7] >> 5) & 7);
@@ -558,6 +558,7 @@ int wacom_wac_irq(struct wacom_wac *wacom_wac, void *wcombo)
case INTUOS3:
case INTUOS3L:
case CINTIQ:
+ case WACOM_BEE:
return (wacom_intuos_irq(wacom_wac, wcombo));
break;
default:
@@ -577,6 +578,8 @@ void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_w
case GRAPHIRE:
input_dev_g(input_dev, wacom_wac);
break;
+ case WACOM_BEE:
+ input_dev_bee(input_dev, wacom_wac);
case INTUOS3:
case INTUOS3L:
case CINTIQ:
@@ -607,12 +610,15 @@ static struct wacom_features wacom_features[] = {
{ "Wacom Graphire3 6x8", 8, 16704, 12064, 511, 63, GRAPHIRE },
{ "Wacom Graphire4 4x5", 8, 10208, 7424, 511, 63, WACOM_G4 },
{ "Wacom Graphire4 6x8", 8, 16704, 12064, 511, 63, WACOM_G4 },
+ { "Wacom BambooFun 4x5", 9, 14760, 9225, 511, 63, WACOM_MO },
+ { "Wacom BambooFun 6x8", 9, 21648, 13530, 511, 63, WACOM_MO },
{ "Wacom Volito", 8, 5104, 3712, 511, 63, GRAPHIRE },
{ "Wacom PenStation2", 8, 3250, 2320, 255, 63, GRAPHIRE },
{ "Wacom Volito2 4x5", 8, 5104, 3712, 511, 63, GRAPHIRE },
{ "Wacom Volito2 2x3", 8, 3248, 2320, 511, 63, GRAPHIRE },
- { "Wacom PenPartner2", 8, 3250, 2320, 255, 63, GRAPHIRE },
+ { "Wacom PenPartner2", 8, 3250, 2320, 511, 63, GRAPHIRE },
{ "Wacom Bamboo", 9, 14760, 9225, 511, 63, WACOM_MO },
+ { "Wacom Bamboo1", 8, 5104, 3712, 511, 63, GRAPHIRE },
{ "Wacom Intuos 4x5", 10, 12700, 10600, 1023, 31, INTUOS },
{ "Wacom Intuos 6x8", 10, 20320, 16240, 1023, 31, INTUOS },
{ "Wacom Intuos 9x12", 10, 30480, 24060, 1023, 31, INTUOS },
@@ -643,6 +649,7 @@ static struct wacom_features wacom_features[] = {
{ "Wacom Intuos3 6x11", 10, 54204, 31750, 1023, 63, INTUOS3 },
{ "Wacom Intuos3 4x6", 10, 31496, 19685, 1023, 63, INTUOS3S },
{ "Wacom Cintiq 21UX", 10, 87200, 65600, 1023, 63, CINTIQ },
+ { "Wacom Cintiq 12WX", 10, 53020, 33440, 1023, 63, WACOM_BEE },
{ "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 31, INTUOS },
{ }
};
@@ -656,12 +663,15 @@ static struct usb_device_id wacom_ids[] = {
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x14) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x15) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x16) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x17) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x18) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x61) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x63) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x64) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x65) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x69) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x20) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x21) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x22) },
@@ -692,6 +702,7 @@ static struct usb_device_id wacom_ids[] = {
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB5) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB7) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC6) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) },
{ }
};
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index a302e229bb8..3342bc05847 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -25,6 +25,7 @@ enum {
INTUOS3,
INTUOS3L,
CINTIQ,
+ WACOM_BEE,
WACOM_MO,
MAX_TYPE
};
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 58934a40f5c..57a1c28bf12 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -213,7 +213,7 @@ static int ads7846_read12_ser(struct device *dev, unsigned command)
struct ads7846 *ts = dev_get_drvdata(dev);
struct ser_req *req = kzalloc(sizeof *req, GFP_KERNEL);
int status;
- int sample;
+ int uninitialized_var(sample);
int use_internal;
if (!req)
diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
index 6c0a9c4761e..4c0b05852cb 100644
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -49,13 +49,13 @@ static void gpio_led_set(struct led_classdev *led_cdev,
if (led_dat->active_low)
level = !level;
- /* setting GPIOs with I2C/etc requires a preemptible task context */
+ /* Setting GPIOs with I2C/etc requires a task context, and we don't
+ * seem to have a reliable way to know if we're already in one; so
+ * let's just assume the worst.
+ */
if (led_dat->can_sleep) {
- if (preempt_count()) {
- led_dat->new_level = level;
- schedule_work(&led_dat->work);
- } else
- gpio_set_value_cansleep(led_dat->gpio, level);
+ led_dat->new_level = level;
+ schedule_work(&led_dat->work);
} else
gpio_set_value(led_dat->gpio, level);
}
@@ -79,6 +79,10 @@ static int gpio_led_probe(struct platform_device *pdev)
cur_led = &pdata->leds[i];
led_dat = &leds_data[i];
+ ret = gpio_request(cur_led->gpio, cur_led->name);
+ if (ret < 0)
+ goto err;
+
led_dat->cdev.name = cur_led->name;
led_dat->cdev.default_trigger = cur_led->default_trigger;
led_dat->gpio = cur_led->gpio;
@@ -87,10 +91,6 @@ static int gpio_led_probe(struct platform_device *pdev)
led_dat->cdev.brightness_set = gpio_led_set;
led_dat->cdev.brightness = LED_OFF;
- ret = gpio_request(led_dat->gpio, led_dat->cdev.name);
- if (ret < 0)
- goto err;
-
gpio_direction_output(led_dat->gpio, led_dat->active_low);
INIT_WORK(&led_dat->work, gpio_led_work);
diff --git a/drivers/lguest/Makefile b/drivers/lguest/Makefile
index 5e8272d296d..7d463c26124 100644
--- a/drivers/lguest/Makefile
+++ b/drivers/lguest/Makefile
@@ -19,3 +19,11 @@ Beer:
@for f in Preparation Guest Drivers Launcher Host Switcher Mastery; do echo "{==- $$f -==}"; make -s $$f; done; echo "{==-==}"
Preparation Preparation! Guest Drivers Launcher Host Switcher Mastery:
@sh ../../Documentation/lguest/extract $(PREFIX) `find ../../* -name '*.[chS]' -wholename '*lguest*'`
+Puppy:
+ @clear
+ @printf " __ \n (___()'\`;\n /, /\`\n \\\\\\\"--\\\\\\ \n"
+ @sleep 2; clear; printf "\n\n Sit!\n\n"; sleep 1; clear
+ @printf " __ \n ()'\`; \n /\\|\` \n / | \n(/_)_|_ \n"
+ @sleep 2; clear; printf "\n\n Stand!\n\n"; sleep 1; clear
+ @printf " __ \n ()'\`; \n /\\|\` \n /._.= \n /| / \n(_\_)_ \n"
+ @sleep 2; clear; printf "\n\n Good puppy!\n\n"; sleep 1; clear
diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c
index c632c08cbbd..5eea4356d70 100644
--- a/drivers/lguest/core.c
+++ b/drivers/lguest/core.c
@@ -1,8 +1,6 @@
/*P:400 This contains run_guest() which actually calls into the Host<->Guest
* Switcher and analyzes the return, such as determining if the Guest wants the
- * Host to do something. This file also contains useful helper routines, and a
- * couple of non-obvious setup and teardown pieces which were implemented after
- * days of debugging pain. :*/
+ * Host to do something. This file also contains useful helper routines. :*/
#include <linux/module.h>
#include <linux/stringify.h>
#include <linux/stddef.h>
@@ -49,8 +47,8 @@ static __init int map_switcher(void)
* easy.
*/
- /* We allocate an array of "struct page"s. map_vm_area() wants the
- * pages in this form, rather than just an array of pointers. */
+ /* We allocate an array of struct page pointers. map_vm_area() wants
+ * this, rather than just an array of pages. */
switcher_page = kmalloc(sizeof(switcher_page[0])*TOTAL_SWITCHER_PAGES,
GFP_KERNEL);
if (!switcher_page) {
@@ -172,7 +170,7 @@ void __lgread(struct lg_cpu *cpu, void *b, unsigned long addr, unsigned bytes)
}
}
-/* This is the write (copy into guest) version. */
+/* This is the write (copy into Guest) version. */
void __lgwrite(struct lg_cpu *cpu, unsigned long addr, const void *b,
unsigned bytes)
{
@@ -209,9 +207,9 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user)
if (cpu->break_out)
return -EAGAIN;
- /* Check if there are any interrupts which can be delivered
- * now: if so, this sets up the hander to be executed when we
- * next run the Guest. */
+ /* Check if there are any interrupts which can be delivered now:
+ * if so, this sets up the hander to be executed when we next
+ * run the Guest. */
maybe_do_interrupt(cpu);
/* All long-lived kernel loops need to check with this horrible
@@ -246,8 +244,10 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user)
lguest_arch_handle_trap(cpu);
}
+ /* Special case: Guest is 'dead' but wants a reboot. */
if (cpu->lg->dead == ERR_PTR(-ERESTART))
return -ERESTART;
+
/* The Guest is dead => "No such file or directory" */
return -ENOENT;
}
diff --git a/drivers/lguest/hypercalls.c b/drivers/lguest/hypercalls.c
index 0f2cb4fd7c6..54d66f05fef 100644
--- a/drivers/lguest/hypercalls.c
+++ b/drivers/lguest/hypercalls.c
@@ -29,7 +29,7 @@
#include "lg.h"
/*H:120 This is the core hypercall routine: where the Guest gets what it wants.
- * Or gets killed. Or, in the case of LHCALL_CRASH, both. */
+ * Or gets killed. Or, in the case of LHCALL_SHUTDOWN, both. */
static void do_hcall(struct lg_cpu *cpu, struct hcall_args *args)
{
switch (args->arg0) {
@@ -190,6 +190,13 @@ static void initialize(struct lg_cpu *cpu)
* pagetable. */
guest_pagetable_clear_all(cpu);
}
+/*:*/
+
+/*M:013 If a Guest reads from a page (so creates a mapping) that it has never
+ * written to, and then the Launcher writes to it (ie. the output of a virtual
+ * device), the Guest will still see the old page. In practice, this never
+ * happens: why would the Guest read a page which it has never written to? But
+ * a similar scenario might one day bite us, so it's worth mentioning. :*/
/*H:100
* Hypercalls
@@ -227,7 +234,7 @@ void do_hypercalls(struct lg_cpu *cpu)
* However, if we are signalled or the Guest sends I/O to the
* Launcher, the run_guest() loop will exit without running the
* Guest. When it comes back it would try to re-run the
- * hypercall. */
+ * hypercall. Finding that bug sucked. */
cpu->hcall = NULL;
}
}
diff --git a/drivers/lguest/interrupts_and_traps.c b/drivers/lguest/interrupts_and_traps.c
index 32e97c1858e..0414ddf8758 100644
--- a/drivers/lguest/interrupts_and_traps.c
+++ b/drivers/lguest/interrupts_and_traps.c
@@ -144,7 +144,6 @@ void maybe_do_interrupt(struct lg_cpu *cpu)
if (copy_from_user(&blk, cpu->lg->lguest_data->blocked_interrupts,
sizeof(blk)))
return;
-
bitmap_andnot(blk, cpu->irqs_pending, blk, LGUEST_IRQS);
/* Find the first interrupt. */
@@ -237,9 +236,9 @@ void free_interrupts(void)
clear_bit(syscall_vector, used_vectors);
}
-/*H:220 Now we've got the routines to deliver interrupts, delivering traps
- * like page fault is easy. The only trick is that Intel decided that some
- * traps should have error codes: */
+/*H:220 Now we've got the routines to deliver interrupts, delivering traps like
+ * page fault is easy. The only trick is that Intel decided that some traps
+ * should have error codes: */
static int has_err(unsigned int trap)
{
return (trap == 8 || (trap >= 10 && trap <= 14) || trap == 17);
diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c
index 1b2ec0bf5eb..2bc9bf7e88e 100644
--- a/drivers/lguest/lguest_device.c
+++ b/drivers/lguest/lguest_device.c
@@ -1,10 +1,10 @@
/*P:050 Lguest guests use a very simple method to describe devices. It's a
- * series of device descriptors contained just above the top of normal
+ * series of device descriptors contained just above the top of normal Guest
* memory.
*
* We use the standard "virtio" device infrastructure, which provides us with a
* console, a network and a block driver. Each one expects some configuration
- * information and a "virtqueue" mechanism to send and receive data. :*/
+ * information and a "virtqueue" or two to send and receive data. :*/
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/lguest_launcher.h>
@@ -53,7 +53,7 @@ struct lguest_device {
* Device configurations
*
* The configuration information for a device consists of one or more
- * virtqueues, a feature bitmaks, and some configuration bytes. The
+ * virtqueues, a feature bitmap, and some configuration bytes. The
* configuration bytes don't really matter to us: the Launcher sets them up, and
* the driver will look at them during setup.
*
@@ -179,7 +179,7 @@ struct lguest_vq_info
};
/* When the virtio_ring code wants to prod the Host, it calls us here and we
- * make a hypercall. We hand the page number of the virtqueue so the Host
+ * make a hypercall. We hand the physical address of the virtqueue so the Host
* knows which virtqueue we're talking about. */
static void lg_notify(struct virtqueue *vq)
{
@@ -199,7 +199,8 @@ static void lg_notify(struct virtqueue *vq)
* allocate its own pages and tell the Host where they are, but for lguest it's
* simpler for the Host to simply tell us where the pages are.
*
- * So we provide devices with a "find virtqueue and set it up" function. */
+ * So we provide drivers with a "find the Nth virtqueue and set it up"
+ * function. */
static struct virtqueue *lg_find_vq(struct virtio_device *vdev,
unsigned index,
void (*callback)(struct virtqueue *vq))
diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c
index 2221485b077..645e6e040bf 100644
--- a/drivers/lguest/lguest_user.c
+++ b/drivers/lguest/lguest_user.c
@@ -73,7 +73,7 @@ static ssize_t read(struct file *file, char __user *user, size_t size,loff_t*o)
if (current != cpu->tsk)
return -EPERM;
- /* If the guest is already dead, we indicate why */
+ /* If the Guest is already dead, we indicate why */
if (lg->dead) {
size_t len;
@@ -88,7 +88,7 @@ static ssize_t read(struct file *file, char __user *user, size_t size,loff_t*o)
return len;
}
- /* If we returned from read() last time because the Guest notified,
+ /* If we returned from read() last time because the Guest sent I/O,
* clear the flag. */
if (cpu->pending_notify)
cpu->pending_notify = 0;
@@ -97,14 +97,20 @@ static ssize_t read(struct file *file, char __user *user, size_t size,loff_t*o)
return run_guest(cpu, (unsigned long __user *)user);
}
+/*L:025 This actually initializes a CPU. For the moment, a Guest is only
+ * uniprocessor, so "id" is always 0. */
static int lg_cpu_start(struct lg_cpu *cpu, unsigned id, unsigned long start_ip)
{
+ /* We have a limited number the number of CPUs in the lguest struct. */
if (id >= NR_CPUS)
return -EINVAL;
+ /* Set up this CPU's id, and pointer back to the lguest struct. */
cpu->id = id;
cpu->lg = container_of((cpu - id), struct lguest, cpus[0]);
cpu->lg->nr_cpus++;
+
+ /* Each CPU has a timer it can set. */
init_clockdev(cpu);
/* We need a complete page for the Guest registers: they are accessible
@@ -120,11 +126,11 @@ static int lg_cpu_start(struct lg_cpu *cpu, unsigned id, unsigned long start_ip)
* address. */
lguest_arch_setup_regs(cpu, start_ip);
- /* Initialize the queue for the waker to wait on */
+ /* Initialize the queue for the Waker to wait on */
init_waitqueue_head(&cpu->break_wq);
/* We keep a pointer to the Launcher task (ie. current task) for when
- * other Guests want to wake this one (inter-Guest I/O). */
+ * other Guests want to wake this one (eg. console input). */
cpu->tsk = current;
/* We need to keep a pointer to the Launcher's memory map, because if
@@ -136,6 +142,7 @@ static int lg_cpu_start(struct lg_cpu *cpu, unsigned id, unsigned long start_ip)
* when the same Guest runs on the same CPU twice. */
cpu->last_pages = NULL;
+ /* No error == success. */
return 0;
}
@@ -182,17 +189,16 @@ static int initialize(struct file *file, const unsigned long __user *input)
}
/* Populate the easy fields of our "struct lguest" */
- lg->mem_base = (void __user *)(long)args[0];
+ lg->mem_base = (void __user *)args[0];
lg->pfn_limit = args[1];
- /* This is the first cpu */
+ /* This is the first cpu (cpu 0) and it will start booting at args[3] */
err = lg_cpu_start(&lg->cpus[0], 0, args[3]);
if (err)
goto release_guest;
/* Initialize the Guest's shadow page tables, using the toplevel
- * address the Launcher gave us. This allocates memory, so can
- * fail. */
+ * address the Launcher gave us. This allocates memory, so can fail. */
err = init_guest_pagetable(lg, args[2]);
if (err)
goto free_regs;
@@ -218,11 +224,16 @@ unlock:
/*L:010 The first operation the Launcher does must be a write. All writes
* start with an unsigned long number: for the first write this must be
* LHREQ_INITIALIZE to set up the Guest. After that the Launcher can use
- * writes of other values to send interrupts. */
+ * writes of other values to send interrupts.
+ *
+ * Note that we overload the "offset" in the /dev/lguest file to indicate what
+ * CPU number we're dealing with. Currently this is always 0, since we only
+ * support uniprocessor Guests, but you can see the beginnings of SMP support
+ * here. */
static ssize_t write(struct file *file, const char __user *in,
size_t size, loff_t *off)
{
- /* Once the guest is initialized, we hold the "struct lguest" in the
+ /* Once the Guest is initialized, we hold the "struct lguest" in the
* file private data. */
struct lguest *lg = file->private_data;
const unsigned long __user *input = (const unsigned long __user *)in;
@@ -230,6 +241,7 @@ static ssize_t write(struct file *file, const char __user *in,
struct lg_cpu *uninitialized_var(cpu);
unsigned int cpu_id = *off;
+ /* The first value tells us what this request is. */
if (get_user(req, input) != 0)
return -EFAULT;
input++;
diff --git a/drivers/lguest/page_tables.c b/drivers/lguest/page_tables.c
index a7f64a9d67e..d93500f24fb 100644
--- a/drivers/lguest/page_tables.c
+++ b/drivers/lguest/page_tables.c
@@ -2,8 +2,8 @@
* previous encounters. It's functional, and as neat as it can be in the
* circumstances, but be wary, for these things are subtle and break easily.
* The Guest provides a virtual to physical mapping, but we can neither trust
- * it nor use it: we verify and convert it here to point the hardware to the
- * actual Guest pages when running the Guest. :*/
+ * it nor use it: we verify and convert it here then point the CPU to the
+ * converted Guest pages when running the Guest. :*/
/* Copyright (C) Rusty Russell IBM Corporation 2006.
* GPL v2 and any later version */
@@ -106,6 +106,11 @@ static unsigned long gpte_addr(pgd_t gpgd, unsigned long vaddr)
BUG_ON(!(pgd_flags(gpgd) & _PAGE_PRESENT));
return gpage + ((vaddr>>PAGE_SHIFT) % PTRS_PER_PTE) * sizeof(pte_t);
}
+/*:*/
+
+/*M:014 get_pfn is slow; it takes the mmap sem and calls get_user_pages. We
+ * could probably try to grab batches of pages here as an optimization
+ * (ie. pre-faulting). :*/
/*H:350 This routine takes a page number given by the Guest and converts it to
* an actual, physical page number. It can fail for several reasons: the
@@ -113,8 +118,8 @@ static unsigned long gpte_addr(pgd_t gpgd, unsigned long vaddr)
* and the page is read-only, or the write flag was set and the page was
* shared so had to be copied, but we ran out of memory.
*
- * This holds a reference to the page, so release_pte() is careful to
- * put that back. */
+ * This holds a reference to the page, so release_pte() is careful to put that
+ * back. */
static unsigned long get_pfn(unsigned long virtpfn, int write)
{
struct page *page;
@@ -532,13 +537,13 @@ static void do_set_pte(struct lg_cpu *cpu, int idx,
* all processes. So when the page table above that address changes, we update
* all the page tables, not just the current one. This is rare.
*
- * The benefit is that when we have to track a new page table, we can copy keep
- * all the kernel mappings. This speeds up context switch immensely. */
+ * The benefit is that when we have to track a new page table, we can keep all
+ * the kernel mappings. This speeds up context switch immensely. */
void guest_set_pte(struct lg_cpu *cpu,
unsigned long gpgdir, unsigned long vaddr, pte_t gpte)
{
- /* Kernel mappings must be changed on all top levels. Slow, but
- * doesn't happen often. */
+ /* Kernel mappings must be changed on all top levels. Slow, but doesn't
+ * happen often. */
if (vaddr >= cpu->lg->kernel_address) {
unsigned int i;
for (i = 0; i < ARRAY_SIZE(cpu->lg->pgdirs); i++)
@@ -704,12 +709,11 @@ static __init void populate_switcher_pte_page(unsigned int cpu,
/* We've made it through the page table code. Perhaps our tired brains are
* still processing the details, or perhaps we're simply glad it's over.
*
- * If nothing else, note that all this complexity in juggling shadow page
- * tables in sync with the Guest's page tables is for one reason: for most
- * Guests this page table dance determines how bad performance will be. This
- * is why Xen uses exotic direct Guest pagetable manipulation, and why both
- * Intel and AMD have implemented shadow page table support directly into
- * hardware.
+ * If nothing else, note that all this complexity in juggling shadow page tables
+ * in sync with the Guest's page tables is for one reason: for most Guests this
+ * page table dance determines how bad performance will be. This is why Xen
+ * uses exotic direct Guest pagetable manipulation, and why both Intel and AMD
+ * have implemented shadow page table support directly into hardware.
*
* There is just one file remaining in the Host. */
diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c
index 635187812d5..5126d5d9ea0 100644
--- a/drivers/lguest/x86/core.c
+++ b/drivers/lguest/x86/core.c
@@ -17,6 +17,13 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+/*P:450 This file contains the x86-specific lguest code. It used to be all
+ * mixed in with drivers/lguest/core.c but several foolhardy code slashers
+ * wrestled most of the dependencies out to here in preparation for porting
+ * lguest to other architectures (see what I mean by foolhardy?).
+ *
+ * This also contains a couple of non-obvious setup and teardown pieces which
+ * were implemented after days of debugging pain. :*/
#include <linux/kernel.h>
#include <linux/start_kernel.h>
#include <linux/string.h>
@@ -157,6 +164,8 @@ static void run_guest_once(struct lg_cpu *cpu, struct lguest_pages *pages)
* also simplify copy_in_guest_info(). Note that we'd still need to restore
* things when we exit to Launcher userspace, but that's fairly easy.
*
+ * We could also try using this hooks for PGE, but that might be too expensive.
+ *
* The hooks were designed for KVM, but we can also put them to good use. :*/
/*H:040 This is the i386-specific code to setup and run the Guest. Interrupts
@@ -182,7 +191,7 @@ void lguest_arch_run_guest(struct lg_cpu *cpu)
* was doing. */
run_guest_once(cpu, lguest_pages(raw_smp_processor_id()));
- /* Note that the "regs" pointer contains two extra entries which are
+ /* Note that the "regs" structure contains two extra entries which are
* not really registers: a trap number which says what interrupt or
* trap made the switcher code come back, and an error code which some
* traps set. */
@@ -293,11 +302,10 @@ void lguest_arch_handle_trap(struct lg_cpu *cpu)
break;
case 14: /* We've intercepted a Page Fault. */
/* The Guest accessed a virtual address that wasn't mapped.
- * This happens a lot: we don't actually set up most of the
- * page tables for the Guest at all when we start: as it runs
- * it asks for more and more, and we set them up as
- * required. In this case, we don't even tell the Guest that
- * the fault happened.
+ * This happens a lot: we don't actually set up most of the page
+ * tables for the Guest at all when we start: as it runs it asks
+ * for more and more, and we set them up as required. In this
+ * case, we don't even tell the Guest that the fault happened.
*
* The errcode tells whether this was a read or a write, and
* whether kernel or userspace code. */
@@ -342,7 +350,7 @@ void lguest_arch_handle_trap(struct lg_cpu *cpu)
if (!deliver_trap(cpu, cpu->regs->trapnum))
/* If the Guest doesn't have a handler (either it hasn't
* registered any yet, or it's one of the faults we don't let
- * it handle), it dies with a cryptic error message. */
+ * it handle), it dies with this cryptic error message. */
kill_guest(cpu, "unhandled trap %li at %#lx (%#lx)",
cpu->regs->trapnum, cpu->regs->eip,
cpu->regs->trapnum == 14 ? cpu->arch.last_pagefault
@@ -375,8 +383,8 @@ void __init lguest_arch_host_init(void)
* The only exception is the interrupt handlers in switcher.S: their
* addresses are placed in a table (default_idt_entries), so we need to
* update the table with the new addresses. switcher_offset() is a
- * convenience function which returns the distance between the builtin
- * switcher code and the high-mapped copy we just made. */
+ * convenience function which returns the distance between the
+ * compiled-in switcher code and the high-mapped copy we just made. */
for (i = 0; i < IDT_ENTRIES; i++)
default_idt_entries[i] += switcher_offset();
@@ -416,7 +424,7 @@ void __init lguest_arch_host_init(void)
state->guest_gdt_desc.address = (long)&state->guest_gdt;
/* We know where we want the stack to be when the Guest enters
- * the switcher: in pages->regs. The stack grows upwards, so
+ * the Switcher: in pages->regs. The stack grows upwards, so
* we start it at the end of that structure. */
state->guest_tss.sp0 = (long)(&pages->regs + 1);
/* And this is the GDT entry to use for the stack: we keep a
@@ -513,8 +521,8 @@ int lguest_arch_init_hypercalls(struct lg_cpu *cpu)
{
u32 tsc_speed;
- /* The pointer to the Guest's "struct lguest_data" is the only
- * argument. We check that address now. */
+ /* The pointer to the Guest's "struct lguest_data" is the only argument.
+ * We check that address now. */
if (!lguest_address_ok(cpu->lg, cpu->hcall->arg1,
sizeof(*cpu->lg->lguest_data)))
return -EFAULT;
@@ -546,6 +554,7 @@ int lguest_arch_init_hypercalls(struct lg_cpu *cpu)
return 0;
}
+/*:*/
/*L:030 lguest_arch_setup_regs()
*
diff --git a/drivers/lguest/x86/switcher_32.S b/drivers/lguest/x86/switcher_32.S
index 0af8baaa0d4..3fc15318a80 100644
--- a/drivers/lguest/x86/switcher_32.S
+++ b/drivers/lguest/x86/switcher_32.S
@@ -1,6 +1,6 @@
-/*P:900 This is the Switcher: code which sits at 0xFFC00000 to do the low-level
- * Guest<->Host switch. It is as simple as it can be made, but it's naturally
- * very specific to x86.
+/*P:900 This is the Switcher: code which sits at 0xFFC00000 astride both the
+ * Host and Guest to do the low-level Guest<->Host switch. It is as simple as
+ * it can be made, but it's naturally very specific to x86.
*
* You have now completed Preparation. If this has whet your appetite; if you
* are feeling invigorated and refreshed then the next, more challenging stage
@@ -189,7 +189,7 @@ ENTRY(switch_to_guest)
// Interrupts are turned back on: we are Guest.
iret
-// We treat two paths to switch back to the Host
+// We tread two paths to switch back to the Host
// Yet both must save Guest state and restore Host
// So we put the routine in a macro.
#define SWITCH_TO_HOST \
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index b04f98df94e..835def11419 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -1,7 +1,7 @@
/*
* Copyright (C) 2003 Christophe Saout <christophe@saout.de>
* Copyright (C) 2004 Clemens Fruhwirth <clemens@endorphin.org>
- * Copyright (C) 2006-2007 Red Hat, Inc. All rights reserved.
+ * Copyright (C) 2006-2008 Red Hat, Inc. All rights reserved.
*
* This file is released under the GPL.
*/
@@ -93,6 +93,8 @@ struct crypt_config {
struct workqueue_struct *io_queue;
struct workqueue_struct *crypt_queue;
+ wait_queue_head_t writeq;
+
/*
* crypto related data
*/
@@ -331,14 +333,7 @@ static void crypt_convert_init(struct crypt_config *cc,
ctx->idx_out = bio_out ? bio_out->bi_idx : 0;
ctx->sector = sector + cc->iv_offset;
init_completion(&ctx->restart);
- /*
- * Crypto operation can be asynchronous,
- * ctx->pending is increased after request submission.
- * We need to ensure that we don't call the crypt finish
- * operation before pending got incremented
- * (dependent on crypt submission return code).
- */
- atomic_set(&ctx->pending, 2);
+ atomic_set(&ctx->pending, 1);
}
static int crypt_convert_block(struct crypt_config *cc,
@@ -411,43 +406,42 @@ static void crypt_alloc_req(struct crypt_config *cc,
static int crypt_convert(struct crypt_config *cc,
struct convert_context *ctx)
{
- int r = 0;
+ int r;
while(ctx->idx_in < ctx->bio_in->bi_vcnt &&
ctx->idx_out < ctx->bio_out->bi_vcnt) {
crypt_alloc_req(cc, ctx);
+ atomic_inc(&ctx->pending);
+
r = crypt_convert_block(cc, ctx, cc->req);
switch (r) {
+ /* async */
case -EBUSY:
wait_for_completion(&ctx->restart);
INIT_COMPLETION(ctx->restart);
/* fall through*/
case -EINPROGRESS:
- atomic_inc(&ctx->pending);
cc->req = NULL;
- r = 0;
- /* fall through*/
+ ctx->sector++;
+ continue;
+
+ /* sync */
case 0:
+ atomic_dec(&ctx->pending);
ctx->sector++;
continue;
- }
- break;
+ /* error */
+ default:
+ atomic_dec(&ctx->pending);
+ return r;
+ }
}
- /*
- * If there are pending crypto operation run async
- * code. Otherwise process return code synchronously.
- * The step of 2 ensures that async finish doesn't
- * call crypto finish too early.
- */
- if (atomic_sub_return(2, &ctx->pending))
- return -EINPROGRESS;
-
- return r;
+ return 0;
}
static void dm_crypt_bio_destructor(struct bio *bio)
@@ -624,8 +618,10 @@ static void kcryptd_io_read(struct dm_crypt_io *io)
static void kcryptd_io_write(struct dm_crypt_io *io)
{
struct bio *clone = io->ctx.bio_out;
+ struct crypt_config *cc = io->target->private;
generic_make_request(clone);
+ wake_up(&cc->writeq);
}
static void kcryptd_io(struct work_struct *work)
@@ -698,7 +694,8 @@ static void kcryptd_crypt_write_convert_loop(struct dm_crypt_io *io)
r = crypt_convert(cc, &io->ctx);
- if (r != -EINPROGRESS) {
+ if (atomic_dec_and_test(&io->ctx.pending)) {
+ /* processed, no running async crypto */
kcryptd_crypt_write_io_submit(io, r, 0);
if (unlikely(r < 0))
return;
@@ -706,8 +703,12 @@ static void kcryptd_crypt_write_convert_loop(struct dm_crypt_io *io)
atomic_inc(&io->pending);
/* out of memory -> run queues */
- if (unlikely(remaining))
+ if (unlikely(remaining)) {
+ /* wait for async crypto then reinitialize pending */
+ wait_event(cc->writeq, !atomic_read(&io->ctx.pending));
+ atomic_set(&io->ctx.pending, 1);
congestion_wait(WRITE, HZ/100);
+ }
}
}
@@ -746,7 +747,7 @@ static void kcryptd_crypt_read_convert(struct dm_crypt_io *io)
r = crypt_convert(cc, &io->ctx);
- if (r != -EINPROGRESS)
+ if (atomic_dec_and_test(&io->ctx.pending))
kcryptd_crypt_read_done(io, r);
crypt_dec_pending(io);
@@ -1047,6 +1048,7 @@ static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv)
goto bad_crypt_queue;
}
+ init_waitqueue_head(&cc->writeq);
ti->private = cc;
return 0;
diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c
index b8e342fe758..8f25f628ef1 100644
--- a/drivers/md/dm-io.c
+++ b/drivers/md/dm-io.c
@@ -114,7 +114,7 @@ static void dec_count(struct io *io, unsigned int region, int error)
wake_up_process(io->sleeper);
else {
- int r = io->error;
+ unsigned long r = io->error;
io_notify_fn fn = io->callback;
void *context = io->context;
diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c
index 51605870f89..762cb086bb7 100644
--- a/drivers/md/dm-raid1.c
+++ b/drivers/md/dm-raid1.c
@@ -753,7 +753,7 @@ out:
* are in the no-sync state. We have to recover these by
* recopying from the default mirror to all the others.
*---------------------------------------------------------------*/
-static void recovery_complete(int read_err, unsigned int write_err,
+static void recovery_complete(int read_err, unsigned long write_err,
void *context)
{
struct region *reg = (struct region *)context;
@@ -767,7 +767,7 @@ static void recovery_complete(int read_err, unsigned int write_err,
}
if (write_err) {
- DMERR_LIMIT("Write error during recovery (error = 0x%x)",
+ DMERR_LIMIT("Write error during recovery (error = 0x%lx)",
write_err);
/*
* Bits correspond to devices (excluding default mirror).
diff --git a/drivers/md/dm-snap.c b/drivers/md/dm-snap.c
index ae24eab8cd8..4dc8a43c034 100644
--- a/drivers/md/dm-snap.c
+++ b/drivers/md/dm-snap.c
@@ -804,7 +804,7 @@ static void commit_callback(void *context, int success)
* Called when the copy I/O has finished. kcopyd actually runs
* this code so don't block.
*/
-static void copy_callback(int read_err, unsigned int write_err, void *context)
+static void copy_callback(int read_err, unsigned long write_err, void *context)
{
struct dm_snap_pending_exception *pe = context;
struct dm_snapshot *s = pe->snap;
diff --git a/drivers/md/kcopyd.c b/drivers/md/kcopyd.c
index f3831f31223..e76b52ade69 100644
--- a/drivers/md/kcopyd.c
+++ b/drivers/md/kcopyd.c
@@ -169,7 +169,7 @@ struct kcopyd_job {
* Error state of the job.
*/
int read_err;
- unsigned int write_err;
+ unsigned long write_err;
/*
* Either READ or WRITE
@@ -293,7 +293,7 @@ static int run_complete_job(struct kcopyd_job *job)
{
void *context = job->context;
int read_err = job->read_err;
- unsigned int write_err = job->write_err;
+ unsigned long write_err = job->write_err;
kcopyd_notify_fn fn = job->fn;
struct kcopyd_client *kc = job->kc;
@@ -396,7 +396,7 @@ static int process_jobs(struct list_head *jobs, int (*fn) (struct kcopyd_job *))
if (r < 0) {
/* error this rogue job */
if (job->rw == WRITE)
- job->write_err = (unsigned int) -1;
+ job->write_err = (unsigned long) -1L;
else
job->read_err = 1;
push(&_complete_jobs, job);
@@ -448,8 +448,8 @@ static void dispatch_job(struct kcopyd_job *job)
}
#define SUB_JOB_SIZE 128
-static void segment_complete(int read_err,
- unsigned int write_err, void *context)
+static void segment_complete(int read_err, unsigned long write_err,
+ void *context)
{
/* FIXME: tidy this function */
sector_t progress = 0;
diff --git a/drivers/md/kcopyd.h b/drivers/md/kcopyd.h
index 4621ea055c0..4845f2a0c67 100644
--- a/drivers/md/kcopyd.h
+++ b/drivers/md/kcopyd.h
@@ -32,8 +32,8 @@ void kcopyd_client_destroy(struct kcopyd_client *kc);
* read_err is a boolean,
* write_err is a bitset, with 1 bit for each destination region
*/
-typedef void (*kcopyd_notify_fn)(int read_err,
- unsigned int write_err, void *context);
+typedef void (*kcopyd_notify_fn)(int read_err, unsigned long write_err,
+ void *context);
int kcopyd_copy(struct kcopyd_client *kc, struct io_region *from,
unsigned int num_dests, struct io_region *dests,
diff --git a/drivers/md/md.c b/drivers/md/md.c
index ccbbf63727c..61ccbd2683f 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -1864,17 +1864,6 @@ static struct rdev_sysfs_entry rdev_state =
__ATTR(state, S_IRUGO|S_IWUSR, state_show, state_store);
static ssize_t
-super_show(mdk_rdev_t *rdev, char *page)
-{
- if (rdev->sb_loaded && rdev->sb_size) {
- memcpy(page, page_address(rdev->sb_page), rdev->sb_size);
- return rdev->sb_size;
- } else
- return 0;
-}
-static struct rdev_sysfs_entry rdev_super = __ATTR_RO(super);
-
-static ssize_t
errors_show(mdk_rdev_t *rdev, char *page)
{
return sprintf(page, "%d\n", atomic_read(&rdev->corrected_errors));
@@ -2060,7 +2049,6 @@ __ATTR(size, S_IRUGO|S_IWUSR, rdev_size_show, rdev_size_store);
static struct attribute *rdev_default_attrs[] = {
&rdev_state.attr,
- &rdev_super.attr,
&rdev_errors.attr,
&rdev_slot.attr,
&rdev_offset.attr,
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 2d6f1a51359..c574cf5efb5 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -1143,7 +1143,7 @@ static void raid5_end_read_request(struct bio * bi, int error)
rdev = conf->disks[i].rdev;
printk(KERN_INFO "raid5:%s: read error corrected (%lu sectors at %llu on %s)\n",
mdname(conf->mddev), STRIPE_SECTORS,
- (unsigned long long)sh->sector + rdev->data_offset,
+ (unsigned long long)(sh->sector + rdev->data_offset),
bdevname(rdev->bdev, b));
clear_bit(R5_ReadError, &sh->dev[i].flags);
clear_bit(R5_ReWrite, &sh->dev[i].flags);
@@ -1160,13 +1160,13 @@ static void raid5_end_read_request(struct bio * bi, int error)
if (conf->mddev->degraded)
printk(KERN_WARNING "raid5:%s: read error not correctable (sector %llu on %s).\n",
mdname(conf->mddev),
- (unsigned long long)sh->sector + rdev->data_offset,
+ (unsigned long long)(sh->sector + rdev->data_offset),
bdn);
else if (test_bit(R5_ReWrite, &sh->dev[i].flags))
/* Oh, no!!! */
printk(KERN_WARNING "raid5:%s: read error NOT corrected!! (sector %llu on %s).\n",
mdname(conf->mddev),
- (unsigned long long)sh->sector + rdev->data_offset,
+ (unsigned long long)(sh->sector + rdev->data_offset),
bdn);
else if (atomic_read(&rdev->read_errors)
> conf->max_nr_stripes)
diff --git a/drivers/media/common/saa7146_core.c b/drivers/media/common/saa7146_core.c
index 168a8d3a5e5..7707b8c7394 100644
--- a/drivers/media/common/saa7146_core.c
+++ b/drivers/media/common/saa7146_core.c
@@ -306,25 +306,22 @@ static irqreturn_t interrupt_hw(int irq, void *dev_id)
return IRQ_NONE;
}
- if( 0 != (dev->ext)) {
- if( 0 != (dev->ext->irq_mask & isr )) {
- if( 0 != dev->ext->irq_func ) {
+ if (dev->ext) {
+ if (dev->ext->irq_mask & isr) {
+ if (dev->ext->irq_func)
dev->ext->irq_func(dev, &isr);
- }
isr &= ~dev->ext->irq_mask;
}
}
if (0 != (isr & (MASK_27))) {
DEB_INT(("irq: RPS0 (0x%08x).\n",isr));
- if( 0 != dev->vv_data && 0 != dev->vv_callback) {
+ if (dev->vv_data && dev->vv_callback)
dev->vv_callback(dev,isr);
- }
isr &= ~MASK_27;
}
if (0 != (isr & (MASK_28))) {
- if( 0 != dev->vv_data && 0 != dev->vv_callback) {
+ if (dev->vv_data && dev->vv_callback)
dev->vv_callback(dev,isr);
- }
isr &= ~MASK_28;
}
if (0 != (isr & (MASK_16|MASK_17))) {
diff --git a/drivers/media/common/saa7146_fops.c b/drivers/media/common/saa7146_fops.c
index f0703d8bc3e..171afe7da6b 100644
--- a/drivers/media/common/saa7146_fops.c
+++ b/drivers/media/common/saa7146_fops.c
@@ -272,7 +272,7 @@ static int fops_open(struct inode *inode, struct file *file)
result = 0;
out:
- if( fh != 0 && result != 0 ) {
+ if (fh && result != 0) {
kfree(fh);
file->private_data = NULL;
}
diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c
index ed3f8268ed1..4c8b62e2c03 100644
--- a/drivers/media/dvb/dvb-core/dvb_net.c
+++ b/drivers/media/dvb/dvb-core/dvb_net.c
@@ -784,8 +784,8 @@ static int dvb_net_ts_callback(const u8 *buffer1, size_t buffer1_len,
{
struct net_device *dev = feed->priv;
- if (buffer2 != 0)
- printk(KERN_WARNING "buffer2 not 0: %p.\n", buffer2);
+ if (buffer2)
+ printk(KERN_WARNING "buffer2 not NULL: %p.\n", buffer2);
if (buffer1_len > 32768)
printk(KERN_WARNING "length > 32k: %zu.\n", buffer1_len);
/* printk("TS callback: %u bytes, %u TS cells @ %p.\n",
diff --git a/drivers/media/dvb/dvb-usb/opera1.c b/drivers/media/dvb/dvb-usb/opera1.c
index 21935bf7059..302cc67407c 100644
--- a/drivers/media/dvb/dvb-usb/opera1.c
+++ b/drivers/media/dvb/dvb-usb/opera1.c
@@ -478,9 +478,9 @@ static int opera1_xilinx_load_firmware(struct usb_device *dev,
err("could not restart the USB controller CPU.");
ret = -EINVAL;
}
- kfree(p);
}
}
+ kfree(p);
if (fw) {
release_firmware(fw);
}
diff --git a/drivers/media/radio/radio-cadet.c b/drivers/media/radio/radio-cadet.c
index 34e317ced5a..57b9e3adc8f 100644
--- a/drivers/media/radio/radio-cadet.c
+++ b/drivers/media/radio/radio-cadet.c
@@ -587,6 +587,8 @@ static struct video_device cadet_radio=
.vidioc_s_input = vidioc_s_input,
};
+#ifdef CONFIG_PNP
+
static struct pnp_device_id cadet_pnp_devices[] = {
/* ADS Cadet AM/FM Radio Card */
{.id = "MSM0c24", .driver_data = 0},
@@ -621,6 +623,10 @@ static struct pnp_driver cadet_pnp_driver = {
.remove = NULL,
};
+#else
+static struct pnp_driver cadet_pnp_driver;
+#endif
+
static int cadet_probe(void)
{
static int iovals[8]={0x330,0x332,0x334,0x336,0x338,0x33a,0x33c,0x33e};
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 37072a21d8c..1832966f53f 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -305,7 +305,7 @@ comment "MPEG video encoders"
config VIDEO_CX2341X
tristate "Conexant CX2341x MPEG encoders"
- depends on VIDEO_V4L2 && EXPERIMENTAL
+ depends on VIDEO_V4L2 && EXPERIMENTAL && VIDEO_V4L2_COMMON
---help---
Support for the Conexant CX23416 MPEG encoders
and CX23415 MPEG encoder/decoders.
@@ -382,7 +382,7 @@ endmenu # encoder / decoder chips
config VIDEO_VIVI
tristate "Virtual Video Driver"
- depends on VIDEO_V4L2 && !SPARC32 && !SPARC64
+ depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
select VIDEOBUF_VMALLOC
default n
---help---
diff --git a/drivers/media/video/adv7170.c b/drivers/media/video/adv7170.c
index cbab53fc624..fea2e723e34 100644
--- a/drivers/media/video/adv7170.c
+++ b/drivers/media/video/adv7170.c
@@ -408,7 +408,7 @@ adv7170_detect_client (struct i2c_adapter *adapter,
return 0;
client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == 0)
+ if (!client)
return -ENOMEM;
client->addr = address;
client->adapter = adapter;
diff --git a/drivers/media/video/adv7175.c b/drivers/media/video/adv7175.c
index 0d0c554bfdf..10d4d89623f 100644
--- a/drivers/media/video/adv7175.c
+++ b/drivers/media/video/adv7175.c
@@ -426,7 +426,7 @@ adv7175_detect_client (struct i2c_adapter *adapter,
return 0;
client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == 0)
+ if (!client)
return -ENOMEM;
client->addr = address;
client->adapter = adapter;
diff --git a/drivers/media/video/bt819.c b/drivers/media/video/bt819.c
index 12d1b9248be..e663cc045c4 100644
--- a/drivers/media/video/bt819.c
+++ b/drivers/media/video/bt819.c
@@ -524,7 +524,7 @@ bt819_detect_client (struct i2c_adapter *adapter,
return 0;
client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == 0)
+ if (!client)
return -ENOMEM;
client->addr = address;
client->adapter = adapter;
diff --git a/drivers/media/video/bt856.c b/drivers/media/video/bt856.c
index e1028a76c04..7dee2e3235a 100644
--- a/drivers/media/video/bt856.c
+++ b/drivers/media/video/bt856.c
@@ -311,7 +311,7 @@ bt856_detect_client (struct i2c_adapter *adapter,
return 0;
client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == 0)
+ if (!client)
return -ENOMEM;
client->addr = address;
client->adapter = adapter;
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index 5404fcc5276..fcf8f2d208a 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -1990,7 +1990,7 @@ static int bttv_g_frequency(struct file *file, void *priv,
if (0 != err)
return err;
- f->type = V4L2_TUNER_ANALOG_TV;
+ f->type = btv->radio_user ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
f->frequency = btv->freq;
return 0;
@@ -2009,7 +2009,8 @@ static int bttv_s_frequency(struct file *file, void *priv,
if (unlikely(f->tuner != 0))
return -EINVAL;
- if (unlikely(f->type != V4L2_TUNER_ANALOG_TV))
+ if (unlikely(f->type != (btv->radio_user
+ ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV)))
return -EINVAL;
mutex_lock(&btv->lock);
btv->freq = f->frequency;
@@ -3389,7 +3390,6 @@ static struct video_device bttv_video_template =
.vidiocgmbuf = vidiocgmbuf,
#endif
.vidioc_g_crop = bttv_g_crop,
- .vidioc_g_crop = bttv_g_crop,
.vidioc_s_crop = bttv_s_crop,
.vidioc_g_fbuf = bttv_g_fbuf,
.vidioc_s_fbuf = bttv_s_fbuf,
@@ -3416,6 +3416,7 @@ static int radio_open(struct inode *inode, struct file *file)
{
int minor = iminor(inode);
struct bttv *btv = NULL;
+ struct bttv_fh *fh;
unsigned int i;
dprintk("bttv: open minor=%d\n",minor);
@@ -3430,12 +3431,19 @@ static int radio_open(struct inode *inode, struct file *file)
return -ENODEV;
dprintk("bttv%d: open called (radio)\n",btv->c.nr);
+
+ /* allocate per filehandle data */
+ fh = kmalloc(sizeof(*fh), GFP_KERNEL);
+ if (NULL == fh)
+ return -ENOMEM;
+ file->private_data = fh;
+ *fh = btv->init;
+ v4l2_prio_open(&btv->prio, &fh->prio);
+
mutex_lock(&btv->lock);
btv->radio_user++;
- file->private_data = btv;
-
bttv_call_i2c_clients(btv,AUDC_SET_RADIO,NULL);
audio_input(btv,TVAUDIO_INPUT_RADIO);
@@ -3445,7 +3453,8 @@ static int radio_open(struct inode *inode, struct file *file)
static int radio_release(struct inode *inode, struct file *file)
{
- struct bttv *btv = file->private_data;
+ struct bttv_fh *fh = file->private_data;
+ struct bttv *btv = fh->btv;
struct rds_command cmd;
btv->radio_user--;
@@ -3509,8 +3518,12 @@ static int radio_enum_input(struct file *file, void *priv,
static int radio_g_audio(struct file *file, void *priv,
struct v4l2_audio *a)
{
+ if (a->index != 0)
+ return -EINVAL;
+
memset(a, 0, sizeof(*a));
strcpy(a->name, "Radio");
+
return 0;
}
@@ -3570,7 +3583,8 @@ static int radio_g_input(struct file *filp, void *priv, unsigned int *i)
static ssize_t radio_read(struct file *file, char __user *data,
size_t count, loff_t *ppos)
{
- struct bttv *btv = file->private_data;
+ struct bttv_fh *fh = file->private_data;
+ struct bttv *btv = fh->btv;
struct rds_command cmd;
cmd.block_count = count/3;
cmd.buffer = data;
@@ -3584,7 +3598,8 @@ static ssize_t radio_read(struct file *file, char __user *data,
static unsigned int radio_poll(struct file *file, poll_table *wait)
{
- struct bttv *btv = file->private_data;
+ struct bttv_fh *fh = file->private_data;
+ struct bttv *btv = fh->btv;
struct rds_command cmd;
cmd.instance = file;
cmd.event_list = wait;
@@ -3600,6 +3615,7 @@ static const struct file_operations radio_fops =
.open = radio_open,
.read = radio_read,
.release = radio_release,
+ .compat_ioctl = v4l_compat_ioctl32,
.ioctl = video_ioctl2,
.llseek = no_llseek,
.poll = radio_poll,
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index 2d414dad5c3..dfa269838e0 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -232,6 +232,7 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
case 78631: /* WinTV-HVR1800 (PCIe, OEM, No IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */
case 79001: /* WinTV-HVR1250 (PCIe, Retail, IR, full height, ATSC and Basic analog */
case 79101: /* WinTV-HVR1250 (PCIe, Retail, IR, half height, ATSC and Basic analog */
+ case 79561: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */
case 79571: /* WinTV-HVR1250 (PCIe, OEM, No IR, full height, ATSC and Basic analog */
case 79671: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */
break;
@@ -347,10 +348,13 @@ void cx23885_card_setup(struct cx23885_dev *dev)
case CX23885_BOARD_HAUPPAUGE_HVR1250:
case CX23885_BOARD_HAUPPAUGE_HVR1500:
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
+ if (dev->i2c_bus[0].i2c_rc == 0)
+ hauppauge_eeprom(dev, eeprom+0x80);
+ break;
case CX23885_BOARD_HAUPPAUGE_HVR1800:
case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
if (dev->i2c_bus[0].i2c_rc == 0)
- hauppauge_eeprom(dev, eeprom+0x80);
+ hauppauge_eeprom(dev, eeprom+0xc0);
break;
}
diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c
index 8e40c7bcc06..7f10b273598 100644
--- a/drivers/media/video/cx23885/cx23885-core.c
+++ b/drivers/media/video/cx23885/cx23885-core.c
@@ -56,137 +56,6 @@ LIST_HEAD(cx23885_devlist);
#define NO_SYNC_LINE (-1U)
-/*
- * CX23885 Assumptions
- * 1 line = 16 bytes of CDT
- * cmds size = 80
- * cdt size = 16 * linesize
- * iqsize = 64
- * maxlines = 6
- *
- * Address Space:
- * 0x00000000 0x00008fff FIFO clusters
- * 0x00010000 0x000104af Channel Management Data Structures
- * 0x000104b0 0x000104ff Free
- * 0x00010500 0x000108bf 15 channels * iqsize
- * 0x000108c0 0x000108ff Free
- * 0x00010900 0x00010e9f IQ's + Cluster Descriptor Tables
- * 15 channels * (iqsize + (maxlines * linesize))
- * 0x00010ea0 0x00010xxx Free
- */
-
-static struct sram_channel cx23885_sram_channels[] = {
- [SRAM_CH01] = {
- .name = "VID A",
- .cmds_start = 0x10000,
- .ctrl_start = 0x105b0,
- .cdt = 0x107b0,
- .fifo_start = 0x40,
- .fifo_size = 0x2800,
- .ptr1_reg = DMA1_PTR1,
- .ptr2_reg = DMA1_PTR2,
- .cnt1_reg = DMA1_CNT1,
- .cnt2_reg = DMA1_CNT2,
- .jumponly = 1,
- },
- [SRAM_CH02] = {
- .name = "ch2",
- .cmds_start = 0x0,
- .ctrl_start = 0x0,
- .cdt = 0x0,
- .fifo_start = 0x0,
- .fifo_size = 0x0,
- .ptr1_reg = DMA2_PTR1,
- .ptr2_reg = DMA2_PTR2,
- .cnt1_reg = DMA2_CNT1,
- .cnt2_reg = DMA2_CNT2,
- },
- [SRAM_CH03] = {
- .name = "TS1 B",
- .cmds_start = 0x100A0,
- .ctrl_start = 0x10630,
- .cdt = 0x10870,
- .fifo_start = 0x5000,
- .fifo_size = 0x1000,
- .ptr1_reg = DMA3_PTR1,
- .ptr2_reg = DMA3_PTR2,
- .cnt1_reg = DMA3_CNT1,
- .cnt2_reg = DMA3_CNT2,
- },
- [SRAM_CH04] = {
- .name = "ch4",
- .cmds_start = 0x0,
- .ctrl_start = 0x0,
- .cdt = 0x0,
- .fifo_start = 0x0,
- .fifo_size = 0x0,
- .ptr1_reg = DMA4_PTR1,
- .ptr2_reg = DMA4_PTR2,
- .cnt1_reg = DMA4_CNT1,
- .cnt2_reg = DMA4_CNT2,
- },
- [SRAM_CH05] = {
- .name = "ch5",
- .cmds_start = 0x0,
- .ctrl_start = 0x0,
- .cdt = 0x0,
- .fifo_start = 0x0,
- .fifo_size = 0x0,
- .ptr1_reg = DMA5_PTR1,
- .ptr2_reg = DMA5_PTR2,
- .cnt1_reg = DMA5_CNT1,
- .cnt2_reg = DMA5_CNT2,
- },
- [SRAM_CH06] = {
- .name = "TS2 C",
- .cmds_start = 0x10140,
- .ctrl_start = 0x10680,
- .cdt = 0x108d0,
- .fifo_start = 0x6000,
- .fifo_size = 0x1000,
- .ptr1_reg = DMA5_PTR1,
- .ptr2_reg = DMA5_PTR2,
- .cnt1_reg = DMA5_CNT1,
- .cnt2_reg = DMA5_CNT2,
- },
- [SRAM_CH07] = {
- .name = "ch7",
- .cmds_start = 0x0,
- .ctrl_start = 0x0,
- .cdt = 0x0,
- .fifo_start = 0x0,
- .fifo_size = 0x0,
- .ptr1_reg = DMA6_PTR1,
- .ptr2_reg = DMA6_PTR2,
- .cnt1_reg = DMA6_CNT1,
- .cnt2_reg = DMA6_CNT2,
- },
- [SRAM_CH08] = {
- .name = "ch8",
- .cmds_start = 0x0,
- .ctrl_start = 0x0,
- .cdt = 0x0,
- .fifo_start = 0x0,
- .fifo_size = 0x0,
- .ptr1_reg = DMA7_PTR1,
- .ptr2_reg = DMA7_PTR2,
- .cnt1_reg = DMA7_CNT1,
- .cnt2_reg = DMA7_CNT2,
- },
- [SRAM_CH09] = {
- .name = "ch9",
- .cmds_start = 0x0,
- .ctrl_start = 0x0,
- .cdt = 0x0,
- .fifo_start = 0x0,
- .fifo_size = 0x0,
- .ptr1_reg = DMA8_PTR1,
- .ptr2_reg = DMA8_PTR2,
- .cnt1_reg = DMA8_CNT1,
- .cnt2_reg = DMA8_CNT2,
- },
-};
-
/* FIXME, these allocations will change when
* analog arrives. The be reviewed.
* CX23887 Assumptions
@@ -754,6 +623,7 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
atomic_inc(&dev->refcount);
dev->nr = cx23885_devcount++;
+ dev->sram_channels = cx23887_sram_channels;
sprintf(dev->name, "cx23885[%d]", dev->nr);
mutex_lock(&devlist);
@@ -763,13 +633,11 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
/* Configure the internal memory */
if(dev->pci->device == 0x8880) {
dev->bridge = CX23885_BRIDGE_887;
- dev->sram_channels = cx23887_sram_channels;
/* Apply a sensible clock frequency for the PCIe bridge */
dev->clk_freq = 25000000;
} else
if(dev->pci->device == 0x8852) {
dev->bridge = CX23885_BRIDGE_885;
- dev->sram_channels = cx23885_sram_channels;
/* Apply a sensible clock frequency for the PCIe bridge */
dev->clk_freq = 28000000;
} else
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index e6b7f518c56..8c9a8adf52d 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -2196,6 +2196,11 @@ struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr)
cx88_reset(core);
cx88_card_setup_pre_i2c(core);
cx88_i2c_init(core, pci);
+
+ /* load tuner module, if needed */
+ if (TUNER_ABSENT != core->board.tuner_type)
+ request_module("tuner");
+
cx88_call_i2c_clients (core, TUNER_SET_STANDBY, NULL);
cx88_card_setup(core);
cx88_ir_init(core, pci);
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index 7f1931aed20..227179620d1 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -1826,8 +1826,6 @@ static int __devinit cx8800_initdev(struct pci_dev *pci_dev,
cx_set(MO_PCI_INTMSK, core->pci_irqmask);
/* load and configure helper modules */
- if (TUNER_ABSENT != core->board.tuner_type)
- request_module("tuner");
if (core->board.audio_chip == AUDIO_CHIP_WM8775)
request_module("wm8775");
diff --git a/drivers/media/video/dpc7146.c b/drivers/media/video/dpc7146.c
index 566e479e262..9ceb6b2f394 100644
--- a/drivers/media/video/dpc7146.c
+++ b/drivers/media/video/dpc7146.c
@@ -131,7 +131,7 @@ static int dpc_probe(struct saa7146_dev* dev)
device_for_each_child(&dpc->i2c_adapter.dev, dpc, dpc_check_clients);
/* check if all devices are present */
- if( 0 == dpc->saa7111a ) {
+ if (!dpc->saa7111a) {
DEB_D(("dpc_v4l2.o: dpc_attach failed for this device.\n"));
i2c_del_adapter(&dpc->i2c_adapter);
kfree(dpc);
diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index 7d1537cab86..c1caaa855b9 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -267,7 +267,7 @@ static int em28xx_write_ac97(struct em28xx *dev, u8 reg, u8 *val)
for (i = 0; i < 10; i++) {
if ((ret = em28xx_read_reg(dev, AC97BUSY_REG)) < 0)
return ret;
- if (!((u8) ret) & 0x01)
+ if (!(ret & 0x01))
return 0;
msleep(5);
}
diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c
index d42f120354e..948ca35e7ee 100644
--- a/drivers/media/video/ivtv/ivtv-driver.c
+++ b/drivers/media/video/ivtv/ivtv-driver.c
@@ -54,7 +54,6 @@
#include "ivtv-vbi.h"
#include "ivtv-routing.h"
#include "ivtv-gpio.h"
-#include "ivtv-yuv.h"
#include <media/tveeprom.h>
#include <media/saa7115.h>
@@ -700,6 +699,9 @@ static int __devinit ivtv_init_struct1(struct ivtv *itv)
itv->vbi.in.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE;
itv->vbi.sliced_in = &itv->vbi.in.fmt.sliced;
+ /* Init the sg table for osd/yuv output */
+ sg_init_table(itv->udma.SGlist, IVTV_DMA_SG_OSD_ENT);
+
/* OSD */
itv->osd_global_alpha_state = 1;
itv->osd_global_alpha = 255;
@@ -1053,9 +1055,6 @@ static int __devinit ivtv_probe(struct pci_dev *dev,
goto free_io;
}
- /* Check yuv output filter table */
- if (itv->has_cx23415) ivtv_yuv_filter_check(itv);
-
ivtv_gpio_init(itv);
/* active i2c */
diff --git a/drivers/media/video/ivtv/ivtv-firmware.c b/drivers/media/video/ivtv/ivtv-firmware.c
index 425eb106390..6dba55b7e25 100644
--- a/drivers/media/video/ivtv/ivtv-firmware.c
+++ b/drivers/media/video/ivtv/ivtv-firmware.c
@@ -22,6 +22,7 @@
#include "ivtv-driver.h"
#include "ivtv-mailbox.h"
#include "ivtv-firmware.h"
+#include "ivtv-yuv.h"
#include <linux/firmware.h>
#define IVTV_MASK_SPU_ENABLE 0xFFFFFFFE
@@ -225,11 +226,14 @@ int ivtv_firmware_init(struct ivtv *itv)
return 0;
itv->dec_mbox.mbox = ivtv_search_mailbox(itv->dec_mem, IVTV_DECODER_SIZE);
- if (itv->dec_mbox.mbox == NULL)
+ if (itv->dec_mbox.mbox == NULL) {
IVTV_ERR("Decoder mailbox not found\n");
- else if (itv->has_cx23415 && ivtv_vapi(itv, CX2341X_DEC_PING_FW, 0)) {
+ } else if (itv->has_cx23415 && ivtv_vapi(itv, CX2341X_DEC_PING_FW, 0)) {
IVTV_ERR("Decoder firmware dead!\n");
itv->dec_mbox.mbox = NULL;
+ } else {
+ /* Firmware okay, so check yuv output filter table */
+ ivtv_yuv_filter_check(itv);
}
return itv->dec_mbox.mbox ? 0 : -ENODEV;
}
diff --git a/drivers/media/video/mt20xx.c b/drivers/media/video/mt20xx.c
index 58bab653330..74fd6a01d4c 100644
--- a/drivers/media/video/mt20xx.c
+++ b/drivers/media/video/mt20xx.c
@@ -647,7 +647,7 @@ struct dvb_frontend *microtune_attach(struct dvb_frontend *fe,
default:
tuner_info("microtune %s found, not (yet?) supported, sorry :-/\n",
name);
- return 0;
+ return NULL;
}
strlcpy(fe->ops.tuner_ops.info.name, name,
diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c
index add6d0d680b..cb5a510f925 100644
--- a/drivers/media/video/mxb.c
+++ b/drivers/media/video/mxb.c
@@ -221,9 +221,8 @@ static int mxb_probe(struct saa7146_dev* dev)
device_for_each_child(&mxb->i2c_adapter.dev, mxb, mxb_check_clients);
/* check if all devices are present */
- if( 0 == mxb->tea6420_1 || 0 == mxb->tea6420_2 || 0 == mxb->tea6415c
- || 0 == mxb->tda9840 || 0 == mxb->saa7111a || 0 == mxb->tuner ) {
-
+ if (!mxb->tea6420_1 || !mxb->tea6420_2 || !mxb->tea6415c ||
+ !mxb->tda9840 || !mxb->saa7111a || !mxb->tuner) {
printk("mxb: did not find all i2c devices. aborting\n");
i2c_del_adapter(&mxb->i2c_adapter);
kfree(mxb);
diff --git a/drivers/media/video/pvrusb2/pvrusb2-ctrl.c b/drivers/media/video/pvrusb2/pvrusb2-ctrl.c
index 46f156fb108..5a3e8d21a38 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-ctrl.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-ctrl.c
@@ -60,7 +60,7 @@ int pvr2_ctrl_set_mask_value(struct pvr2_ctrl *cptr,int mask,int val)
int ret = 0;
if (!cptr) return -EINVAL;
LOCK_TAKE(cptr->hdw->big_lock); do {
- if (cptr->info->set_value != 0) {
+ if (cptr->info->set_value) {
if (cptr->info->type == pvr2_ctl_bitmask) {
mask &= cptr->info->def.type_bitmask.valid_bits;
} else if (cptr->info->type == pvr2_ctl_int) {
@@ -265,7 +265,7 @@ unsigned int pvr2_ctrl_get_v4lflags(struct pvr2_ctrl *cptr)
int pvr2_ctrl_is_writable(struct pvr2_ctrl *cptr)
{
if (!cptr) return 0;
- return cptr->info->set_value != 0;
+ return cptr->info->set_value != NULL;
}
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
index 41ae980405e..d6955fa3959 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
@@ -2291,7 +2291,7 @@ static int pvr2_hdw_commit_setup(struct pvr2_hdw *hdw)
for (idx = 0; idx < hdw->control_cnt; idx++) {
cptr = hdw->controls + idx;
- if (cptr->info->is_dirty == 0) continue;
+ if (!cptr->info->is_dirty) continue;
if (!cptr->info->is_dirty(cptr)) continue;
commit_flag = !0;
@@ -2646,7 +2646,7 @@ void pvr2_hdw_cpufw_set_enabled(struct pvr2_hdw *hdw,
u16 address;
unsigned int pipe;
LOCK_TAKE(hdw->big_lock); do {
- if ((hdw->fw_buffer == 0) == !enable_flag) break;
+ if ((hdw->fw_buffer == NULL) == !enable_flag) break;
if (!enable_flag) {
pvr2_trace(PVR2_TRACE_FIRMWARE,
@@ -2715,7 +2715,7 @@ void pvr2_hdw_cpufw_set_enabled(struct pvr2_hdw *hdw,
/* Return true if we're in a mode for retrieval CPU firmware */
int pvr2_hdw_cpufw_get_enabled(struct pvr2_hdw *hdw)
{
- return hdw->fw_buffer != 0;
+ return hdw->fw_buffer != NULL;
}
diff --git a/drivers/media/video/pvrusb2/pvrusb2-io.c b/drivers/media/video/pvrusb2/pvrusb2-io.c
index ce3c8982ffe..a9889ff96ec 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-io.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-io.c
@@ -563,7 +563,7 @@ void pvr2_stream_kill(struct pvr2_stream *sp)
struct pvr2_buffer *bp;
mutex_lock(&sp->mutex); do {
pvr2_stream_internal_flush(sp);
- while ((bp = pvr2_stream_get_ready_buffer(sp)) != 0) {
+ while ((bp = pvr2_stream_get_ready_buffer(sp)) != NULL) {
pvr2_buffer_set_idle(bp);
}
if (sp->buffer_total_count != sp->buffer_target_count) {
diff --git a/drivers/media/video/pvrusb2/pvrusb2-ioread.c b/drivers/media/video/pvrusb2/pvrusb2-ioread.c
index f782418afa4..c572212c9f1 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-ioread.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-ioread.c
@@ -165,7 +165,7 @@ static int pvr2_ioread_start(struct pvr2_ioread *cp)
if (!(cp->stream)) return 0;
pvr2_trace(PVR2_TRACE_START_STOP,
"/*---TRACE_READ---*/ pvr2_ioread_start id=%p",cp);
- while ((bp = pvr2_stream_get_idle_buffer(cp->stream)) != 0) {
+ while ((bp = pvr2_stream_get_idle_buffer(cp->stream)) != NULL) {
stat = pvr2_buffer_queue(bp);
if (stat < 0) {
pvr2_trace(PVR2_TRACE_DATA_FLOW,
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index f991d72fe10..e0a453a6543 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -915,7 +915,7 @@ static void pwc_iso_stop(struct pwc_device *pdev)
struct urb *urb;
urb = pdev->sbuf[i].urb;
- if (urb != 0) {
+ if (urb) {
PWC_DEBUG_MEMORY("Unlinking URB %p\n", urb);
usb_kill_urb(urb);
}
@@ -931,7 +931,7 @@ static void pwc_iso_free(struct pwc_device *pdev)
struct urb *urb;
urb = pdev->sbuf[i].urb;
- if (urb != 0) {
+ if (urb) {
PWC_DEBUG_MEMORY("Freeing URB\n");
usb_free_urb(urb);
pdev->sbuf[i].urb = NULL;
@@ -1759,8 +1759,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
/* Allocate video_device structure */
pdev->vdev = video_device_alloc();
- if (pdev->vdev == 0)
- {
+ if (!pdev->vdev) {
PWC_ERROR("Err, cannot allocate video_device struture. Failing probe.");
kfree(pdev);
return -ENOMEM;
diff --git a/drivers/media/video/saa7110.c b/drivers/media/video/saa7110.c
index 061134a7ba9..1df2602cd18 100644
--- a/drivers/media/video/saa7110.c
+++ b/drivers/media/video/saa7110.c
@@ -488,7 +488,7 @@ saa7110_detect_client (struct i2c_adapter *adapter,
return 0;
client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == 0)
+ if (!client)
return -ENOMEM;
client->addr = address;
client->adapter = adapter;
@@ -496,7 +496,7 @@ saa7110_detect_client (struct i2c_adapter *adapter,
strlcpy(I2C_NAME(client), "saa7110", sizeof(I2C_NAME(client)));
decoder = kzalloc(sizeof(struct saa7110), GFP_KERNEL);
- if (decoder == 0) {
+ if (!decoder) {
kfree(client);
return -ENOMEM;
}
diff --git a/drivers/media/video/saa7111.c b/drivers/media/video/saa7111.c
index 7ae2d646d00..a0772c53bb1 100644
--- a/drivers/media/video/saa7111.c
+++ b/drivers/media/video/saa7111.c
@@ -502,7 +502,7 @@ saa7111_detect_client (struct i2c_adapter *adapter,
return 0;
client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == 0)
+ if (!client)
return -ENOMEM;
client->addr = address;
client->adapter = adapter;
diff --git a/drivers/media/video/saa7114.c b/drivers/media/video/saa7114.c
index 677df51de1a..bf91a4faa70 100644
--- a/drivers/media/video/saa7114.c
+++ b/drivers/media/video/saa7114.c
@@ -841,7 +841,7 @@ saa7114_detect_client (struct i2c_adapter *adapter,
return 0;
client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == 0)
+ if (!client)
return -ENOMEM;
client->addr = address;
client->adapter = adapter;
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 262830da08c..6f5744286e8 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -2484,27 +2484,28 @@ struct saa7134_board saa7134_boards[] = {
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.gpiomask = 0x080200000,
- .inputs = {{
- .name = name_tv,
- .vmux = 4,
- .amux = TV,
- .tv = 1,
- },{
- .name = name_comp1,
- .vmux = 1,
- .amux = LINE2,
- },{
- .name = name_comp2,
- .vmux = 0,
- .amux = LINE2,
- },{
- .name = name_svideo,
- .vmux = 8,
- .amux = LINE2,
- }},
+ .inputs = { {
+ .name = name_tv,
+ .vmux = 4,
+ .amux = TV,
+ .tv = 1,
+ }, {
+ .name = name_comp1,
+ .vmux = 1,
+ .amux = LINE2,
+ }, {
+ .name = name_comp2,
+ .vmux = 0,
+ .amux = LINE2,
+ }, {
+ .name = name_svideo,
+ .vmux = 8,
+ .amux = LINE2,
+ } },
.radio = {
- .name = name_radio,
- .amux = LINE1,
+ .name = name_radio,
+ .amux = TV,
+ .gpio = 0x0200000,
},
},
[SAA7134_BOARD_ASUSTeK_P7131_DUAL] = {
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index 52baa4f7f7d..58ab163fdbd 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -1022,12 +1022,13 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
saa7134_i2c_register(dev);
/* initialize hardware #2 */
+ if (TUNER_ABSENT != dev->tuner_type)
+ request_module("tuner");
saa7134_board_init2(dev);
+
saa7134_hwinit2(dev);
/* load i2c helpers */
- if (TUNER_ABSENT != dev->tuner_type)
- request_module("tuner");
if (card_is_empress(dev)) {
request_module("saa6752hs");
}
diff --git a/drivers/media/video/saa7185.c b/drivers/media/video/saa7185.c
index 66cc92c0ea6..41f70440fd3 100644
--- a/drivers/media/video/saa7185.c
+++ b/drivers/media/video/saa7185.c
@@ -403,7 +403,7 @@ saa7185_detect_client (struct i2c_adapter *adapter,
return 0;
client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == 0)
+ if (!client)
return -ENOMEM;
client->addr = address;
client->adapter = adapter;
diff --git a/drivers/media/video/tda9840.c b/drivers/media/video/tda9840.c
index ef494febb5e..bdca5d27897 100644
--- a/drivers/media/video/tda9840.c
+++ b/drivers/media/video/tda9840.c
@@ -172,7 +172,7 @@ static int detect(struct i2c_adapter *adapter, int address, int kind)
/* allocate memory for client structure */
client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (0 == client) {
+ if (!client) {
printk("not enough kernel memory\n");
return -ENOMEM;
}
diff --git a/drivers/media/video/tea6415c.c b/drivers/media/video/tea6415c.c
index 523df0b8cc6..df2fad9f391 100644
--- a/drivers/media/video/tea6415c.c
+++ b/drivers/media/video/tea6415c.c
@@ -64,7 +64,7 @@ static int detect(struct i2c_adapter *adapter, int address, int kind)
/* allocate memory for client structure */
client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (0 == client) {
+ if (!client) {
return -ENOMEM;
}
diff --git a/drivers/media/video/tea6420.c b/drivers/media/video/tea6420.c
index ca05cd65508..4ff6c63f723 100644
--- a/drivers/media/video/tea6420.c
+++ b/drivers/media/video/tea6420.c
@@ -101,7 +101,7 @@ static int tea6420_detect(struct i2c_adapter *adapter, int address, int kind)
/* allocate memory for client structure */
client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (0 == client) {
+ if (!client) {
return -ENOMEM;
}
diff --git a/drivers/media/video/tvp5150.c b/drivers/media/video/tvp5150.c
index 445eba4174d..b6e24e714a2 100644
--- a/drivers/media/video/tvp5150.c
+++ b/drivers/media/video/tvp5150.c
@@ -672,7 +672,7 @@ static int tvp5150_set_vbi(struct i2c_client *c,
if (std == V4L2_STD_ALL) {
tvp5150_err("VBI can't be configured without knowing number of lines\n");
return 0;
- } else if (std && V4L2_STD_625_50) {
+ } else if (std & V4L2_STD_625_50) {
/* Don't follow NTSC Line number convension */
line += 3;
}
@@ -719,7 +719,7 @@ static int tvp5150_get_vbi(struct i2c_client *c,
if (std == V4L2_STD_ALL) {
tvp5150_err("VBI can't be configured without knowing number of lines\n");
return 0;
- } else if (std && V4L2_STD_625_50) {
+ } else if (std & V4L2_STD_625_50) {
/* Don't follow NTSC Line number convension */
line += 3;
}
@@ -1072,12 +1072,12 @@ static int tvp5150_detect_client(struct i2c_adapter *adapter,
return 0;
c = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (c == 0)
+ if (!c)
return -ENOMEM;
memcpy(c, &client_template, sizeof(struct i2c_client));
core = kzalloc(sizeof(struct tvp5150), GFP_KERNEL);
- if (core == 0) {
+ if (!core) {
kfree(c);
return -ENOMEM;
}
diff --git a/drivers/media/video/usbvideo/usbvideo.c b/drivers/media/video/usbvideo/usbvideo.c
index fb434b5602a..5d363be7bc7 100644
--- a/drivers/media/video/usbvideo/usbvideo.c
+++ b/drivers/media/video/usbvideo/usbvideo.c
@@ -1034,6 +1034,11 @@ int usbvideo_RegisterVideoDevice(struct uvd *uvd)
info("%s: iface=%d. endpoint=$%02x paletteBits=$%08lx",
__FUNCTION__, uvd->iface, uvd->video_endp, uvd->paletteBits);
}
+ if (uvd->dev == NULL) {
+ err("%s: uvd->dev == NULL", __FUNCTION__);
+ return -EINVAL;
+ }
+ uvd->vdev.dev=&(uvd->dev->dev);
if (video_register_device(&uvd->vdev, VFL_TYPE_GRABBER, video_nr) == -1) {
err("%s: video_register_device failed", __FUNCTION__);
return -EPIPE;
@@ -1041,10 +1046,6 @@ int usbvideo_RegisterVideoDevice(struct uvd *uvd)
if (uvd->debug > 1) {
info("%s: video_register_device() successful", __FUNCTION__);
}
- if (uvd->dev == NULL) {
- err("%s: uvd->dev == NULL", __FUNCTION__);
- return -EINVAL;
- }
info("%s on /dev/video%d: canvas=%s videosize=%s",
(uvd->handle != NULL) ? uvd->handle->drvName : "???",
diff --git a/drivers/media/video/v4l1-compat.c b/drivers/media/video/v4l1-compat.c
index dcf22a3b672..50e1ff9f2be 100644
--- a/drivers/media/video/v4l1-compat.c
+++ b/drivers/media/video/v4l1-compat.c
@@ -303,7 +303,11 @@ v4l_compat_translate_ioctl(struct inode *inode,
{
struct video_capability *cap = arg;
- cap2 = kzalloc(sizeof(*cap2),GFP_KERNEL);
+ cap2 = kzalloc(sizeof(*cap2), GFP_KERNEL);
+ if (!cap2) {
+ err = -ENOMEM;
+ break;
+ }
memset(cap, 0, sizeof(*cap));
memset(&fbuf2, 0, sizeof(fbuf2));
@@ -426,7 +430,11 @@ v4l_compat_translate_ioctl(struct inode *inode,
{
struct video_window *win = arg;
- fmt2 = kzalloc(sizeof(*fmt2),GFP_KERNEL);
+ fmt2 = kzalloc(sizeof(*fmt2), GFP_KERNEL);
+ if (!fmt2) {
+ err = -ENOMEM;
+ break;
+ }
memset(win,0,sizeof(*win));
fmt2->type = V4L2_BUF_TYPE_VIDEO_OVERLAY;
@@ -464,7 +472,11 @@ v4l_compat_translate_ioctl(struct inode *inode,
struct video_window *win = arg;
int err1,err2;
- fmt2 = kzalloc(sizeof(*fmt2),GFP_KERNEL);
+ fmt2 = kzalloc(sizeof(*fmt2), GFP_KERNEL);
+ if (!fmt2) {
+ err = -ENOMEM;
+ break;
+ }
fmt2->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
drv(inode, file, VIDIOC_STREAMOFF, &fmt2->type);
err1 = drv(inode, file, VIDIOC_G_FMT, fmt2);
@@ -586,6 +598,12 @@ v4l_compat_translate_ioctl(struct inode *inode,
{
struct video_picture *pict = arg;
+ fmt2 = kzalloc(sizeof(*fmt2), GFP_KERNEL);
+ if (!fmt2) {
+ err = -ENOMEM;
+ break;
+ }
+
pict->brightness = get_v4l_control(inode, file,
V4L2_CID_BRIGHTNESS,drv);
pict->hue = get_v4l_control(inode, file,
@@ -597,7 +615,6 @@ v4l_compat_translate_ioctl(struct inode *inode,
pict->whiteness = get_v4l_control(inode, file,
V4L2_CID_WHITENESS, drv);
- fmt2 = kzalloc(sizeof(*fmt2),GFP_KERNEL);
fmt2->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
err = drv(inode, file, VIDIOC_G_FMT, fmt2);
if (err < 0) {
@@ -617,6 +634,11 @@ v4l_compat_translate_ioctl(struct inode *inode,
struct video_picture *pict = arg;
int mem_err = 0, ovl_err = 0;
+ fmt2 = kzalloc(sizeof(*fmt2), GFP_KERNEL);
+ if (!fmt2) {
+ err = -ENOMEM;
+ break;
+ }
memset(&fbuf2, 0, sizeof(fbuf2));
set_v4l_control(inode, file,
@@ -636,7 +658,6 @@ v4l_compat_translate_ioctl(struct inode *inode,
* different pixel formats for memory vs overlay.
*/
- fmt2 = kzalloc(sizeof(*fmt2),GFP_KERNEL);
fmt2->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
err = drv(inode, file, VIDIOC_G_FMT, fmt2);
/* If VIDIOC_G_FMT failed, then the driver likely doesn't
@@ -890,7 +911,11 @@ v4l_compat_translate_ioctl(struct inode *inode,
{
struct video_mmap *mm = arg;
- fmt2 = kzalloc(sizeof(*fmt2),GFP_KERNEL);
+ fmt2 = kzalloc(sizeof(*fmt2), GFP_KERNEL);
+ if (!fmt2) {
+ err = -ENOMEM;
+ break;
+ }
memset(&buf2,0,sizeof(buf2));
fmt2->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
@@ -986,7 +1011,11 @@ v4l_compat_translate_ioctl(struct inode *inode,
{
struct vbi_format *fmt = arg;
- fmt2 = kzalloc(sizeof(*fmt2),GFP_KERNEL);
+ fmt2 = kzalloc(sizeof(*fmt2), GFP_KERNEL);
+ if (!fmt2) {
+ err = -ENOMEM;
+ break;
+ }
fmt2->type = V4L2_BUF_TYPE_VBI_CAPTURE;
err = drv(inode, file, VIDIOC_G_FMT, fmt2);
@@ -1018,8 +1047,11 @@ v4l_compat_translate_ioctl(struct inode *inode,
break;
}
- fmt2 = kzalloc(sizeof(*fmt2),GFP_KERNEL);
-
+ fmt2 = kzalloc(sizeof(*fmt2), GFP_KERNEL);
+ if (!fmt2) {
+ err = -ENOMEM;
+ break;
+ }
fmt2->type = V4L2_BUF_TYPE_VBI_CAPTURE;
fmt2->fmt.vbi.samples_per_line = fmt->samples_per_line;
fmt2->fmt.vbi.sampling_rate = fmt->sampling_rate;
diff --git a/drivers/media/video/v4l2-int-device.c b/drivers/media/video/v4l2-int-device.c
index a545dcaf857..0e4549922f2 100644
--- a/drivers/media/video/v4l2-int-device.c
+++ b/drivers/media/video/v4l2-int-device.c
@@ -156,3 +156,5 @@ int v4l2_int_ioctl_1(struct v4l2_int_device *d, int cmd, void *arg)
find_ioctl(d->u.slave, cmd,
(v4l2_int_ioctl_func *)no_such_ioctl_1))(d, arg);
}
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/zoran_driver.c b/drivers/media/video/zoran_driver.c
index dd3d7d2c8b0..fea4946ee71 100644
--- a/drivers/media/video/zoran_driver.c
+++ b/drivers/media/video/zoran_driver.c
@@ -339,7 +339,7 @@ v4l_fbuffer_alloc (struct file *file)
/* Use kmalloc */
mem = kmalloc(fh->v4l_buffers.buffer_size, GFP_KERNEL);
- if (mem == 0) {
+ if (!mem) {
dprintk(1,
KERN_ERR
"%s: v4l_fbuffer_alloc() - kmalloc for V4L buf %d failed\n",
diff --git a/drivers/media/video/zr364xx.c b/drivers/media/video/zr364xx.c
index 1b44784d0ef..04949c82365 100644
--- a/drivers/media/video/zr364xx.c
+++ b/drivers/media/video/zr364xx.c
@@ -390,7 +390,7 @@ static int read_frame(struct zr364xx_camera *cam, int framenum)
}
-static ssize_t zr364xx_read(struct file *file, char *buf, size_t cnt,
+static ssize_t zr364xx_read(struct file *file, char __user *buf, size_t cnt,
loff_t * ppos)
{
unsigned long count = cnt;
diff --git a/drivers/memstick/core/memstick.c b/drivers/memstick/core/memstick.c
index de80dba12f9..946e3d3506a 100644
--- a/drivers/memstick/core/memstick.c
+++ b/drivers/memstick/core/memstick.c
@@ -276,8 +276,6 @@ void memstick_init_req_sg(struct memstick_request *mrq, unsigned char tpc,
mrq->need_card_int = 1;
else
mrq->need_card_int = 0;
-
- mrq->get_int_reg = 0;
}
EXPORT_SYMBOL(memstick_init_req_sg);
@@ -311,8 +309,6 @@ void memstick_init_req(struct memstick_request *mrq, unsigned char tpc,
mrq->need_card_int = 1;
else
mrq->need_card_int = 0;
-
- mrq->get_int_reg = 0;
}
EXPORT_SYMBOL(memstick_init_req);
@@ -342,6 +338,7 @@ static int h_memstick_read_dev_id(struct memstick_dev *card,
card->id.class = id_reg.class;
}
complete(&card->mrq_complete);
+ dev_dbg(&card->dev, "if_mode = %02x\n", id_reg.if_mode);
return -EAGAIN;
}
}
@@ -422,7 +419,6 @@ static void memstick_power_on(struct memstick_host *host)
{
host->set_param(host, MEMSTICK_POWER, MEMSTICK_POWER_ON);
host->set_param(host, MEMSTICK_INTERFACE, MEMSTICK_SERIAL);
- msleep(1);
}
static void memstick_check(struct work_struct *work)
@@ -579,7 +575,8 @@ EXPORT_SYMBOL(memstick_suspend_host);
void memstick_resume_host(struct memstick_host *host)
{
mutex_lock(&host->lock);
- host->set_param(host, MEMSTICK_POWER, MEMSTICK_POWER_ON);
+ if (host->card)
+ memstick_power_on(host);
mutex_unlock(&host->lock);
memstick_detect_change(host);
}
diff --git a/drivers/memstick/core/mspro_block.c b/drivers/memstick/core/mspro_block.c
index 1d637e4561d..557dbbba5cb 100644
--- a/drivers/memstick/core/mspro_block.c
+++ b/drivers/memstick/core/mspro_block.c
@@ -133,6 +133,7 @@ struct mspro_devinfo {
struct mspro_block_data {
struct memstick_dev *card;
unsigned int usage_count;
+ unsigned int caps;
struct gendisk *disk;
struct request_queue *queue;
spinlock_t q_lock;
@@ -577,7 +578,6 @@ static int h_mspro_block_wait_for_ced(struct memstick_dev *card,
static int h_mspro_block_transfer_data(struct memstick_dev *card,
struct memstick_request **mrq)
{
- struct memstick_host *host = card->host;
struct mspro_block_data *msb = memstick_get_drvdata(card);
unsigned char t_val = 0;
struct scatterlist t_sg = { 0 };
@@ -591,12 +591,12 @@ static int h_mspro_block_transfer_data(struct memstick_dev *card,
switch ((*mrq)->tpc) {
case MS_TPC_WRITE_REG:
memstick_init_req(*mrq, MS_TPC_SET_CMD, &msb->transfer_cmd, 1);
- (*mrq)->get_int_reg = 1;
+ (*mrq)->need_card_int = 1;
return 0;
case MS_TPC_SET_CMD:
t_val = (*mrq)->int_reg;
memstick_init_req(*mrq, MS_TPC_GET_INT, NULL, 1);
- if (host->caps & MEMSTICK_CAP_AUTO_GET_INT)
+ if (msb->caps & MEMSTICK_CAP_AUTO_GET_INT)
goto has_int_reg;
return 0;
case MS_TPC_GET_INT:
@@ -646,12 +646,12 @@ has_int_reg:
? MS_TPC_READ_LONG_DATA
: MS_TPC_WRITE_LONG_DATA,
&t_sg);
- (*mrq)->get_int_reg = 1;
+ (*mrq)->need_card_int = 1;
return 0;
case MS_TPC_READ_LONG_DATA:
case MS_TPC_WRITE_LONG_DATA:
msb->current_page++;
- if (host->caps & MEMSTICK_CAP_AUTO_GET_INT) {
+ if (msb->caps & MEMSTICK_CAP_AUTO_GET_INT) {
t_val = (*mrq)->int_reg;
goto has_int_reg;
} else {
@@ -816,12 +816,13 @@ static int mspro_block_wait_for_ced(struct memstick_dev *card)
return card->current_mrq.error;
}
-static int mspro_block_switch_to_parallel(struct memstick_dev *card)
+static int mspro_block_set_interface(struct memstick_dev *card,
+ unsigned char sys_reg)
{
struct memstick_host *host = card->host;
struct mspro_block_data *msb = memstick_get_drvdata(card);
struct mspro_param_register param = {
- .system = MEMSTICK_SYS_PAR4,
+ .system = sys_reg,
.data_count = 0,
.data_address = 0,
.tpc_param = 0
@@ -833,41 +834,70 @@ static int mspro_block_switch_to_parallel(struct memstick_dev *card)
sizeof(param));
memstick_new_req(host);
wait_for_completion(&card->mrq_complete);
- if (card->current_mrq.error)
- return card->current_mrq.error;
+ return card->current_mrq.error;
+}
+
+static int mspro_block_switch_interface(struct memstick_dev *card)
+{
+ struct memstick_host *host = card->host;
+ struct mspro_block_data *msb = memstick_get_drvdata(card);
+ int rc = 0;
+
+ if (msb->caps & MEMSTICK_CAP_PAR4)
+ rc = mspro_block_set_interface(card, MEMSTICK_SYS_PAR4);
+ else
+ return 0;
+
+ if (rc) {
+ printk(KERN_WARNING
+ "%s: could not switch to 4-bit mode, error %d\n",
+ card->dev.bus_id, rc);
+ return 0;
+ }
msb->system = MEMSTICK_SYS_PAR4;
host->set_param(host, MEMSTICK_INTERFACE, MEMSTICK_PAR4);
+ printk(KERN_INFO "%s: switching to 4-bit parallel mode\n",
+ card->dev.bus_id);
+
+ if (msb->caps & MEMSTICK_CAP_PAR8) {
+ rc = mspro_block_set_interface(card, MEMSTICK_SYS_PAR8);
+
+ if (!rc) {
+ msb->system = MEMSTICK_SYS_PAR8;
+ host->set_param(host, MEMSTICK_INTERFACE,
+ MEMSTICK_PAR8);
+ printk(KERN_INFO
+ "%s: switching to 8-bit parallel mode\n",
+ card->dev.bus_id);
+ } else
+ printk(KERN_WARNING
+ "%s: could not switch to 8-bit mode, error %d\n",
+ card->dev.bus_id, rc);
+ }
card->next_request = h_mspro_block_req_init;
msb->mrq_handler = h_mspro_block_default;
memstick_init_req(&card->current_mrq, MS_TPC_GET_INT, NULL, 1);
memstick_new_req(card->host);
wait_for_completion(&card->mrq_complete);
+ rc = card->current_mrq.error;
- if (card->current_mrq.error) {
+ if (rc) {
+ printk(KERN_WARNING
+ "%s: interface error, trying to fall back to serial\n",
+ card->dev.bus_id);
msb->system = MEMSTICK_SYS_SERIAL;
host->set_param(host, MEMSTICK_POWER, MEMSTICK_POWER_OFF);
- msleep(1000);
+ msleep(10);
host->set_param(host, MEMSTICK_POWER, MEMSTICK_POWER_ON);
host->set_param(host, MEMSTICK_INTERFACE, MEMSTICK_SERIAL);
- if (memstick_set_rw_addr(card))
- return card->current_mrq.error;
-
- param.system = msb->system;
-
- card->next_request = h_mspro_block_req_init;
- msb->mrq_handler = h_mspro_block_default;
- memstick_init_req(&card->current_mrq, MS_TPC_WRITE_REG, &param,
- sizeof(param));
- memstick_new_req(host);
- wait_for_completion(&card->mrq_complete);
-
- return -EFAULT;
+ rc = memstick_set_rw_addr(card);
+ if (!rc)
+ rc = mspro_block_set_interface(card, msb->system);
}
-
- return 0;
+ return rc;
}
/* Memory allocated for attributes by this function should be freed by
@@ -1052,16 +1082,18 @@ static int mspro_block_init_card(struct memstick_dev *card)
if (memstick_set_rw_addr(card))
return -EIO;
- if (host->caps & MEMSTICK_CAP_PAR4) {
- if (mspro_block_switch_to_parallel(card))
- printk(KERN_WARNING "%s: could not switch to "
- "parallel interface\n", card->dev.bus_id);
- }
+ msb->caps = host->caps;
+ rc = mspro_block_switch_interface(card);
+ if (rc)
+ return rc;
+ msleep(200);
rc = mspro_block_wait_for_ced(card);
if (rc)
return rc;
dev_dbg(&card->dev, "card activated\n");
+ if (msb->system != MEMSTICK_SYS_SERIAL)
+ msb->caps |= MEMSTICK_CAP_AUTO_GET_INT;
card->next_request = h_mspro_block_req_init;
msb->mrq_handler = h_mspro_block_get_ro;
diff --git a/drivers/memstick/host/jmb38x_ms.c b/drivers/memstick/host/jmb38x_ms.c
index 03fe8783b1e..8770a5fac3b 100644
--- a/drivers/memstick/host/jmb38x_ms.c
+++ b/drivers/memstick/host/jmb38x_ms.c
@@ -12,6 +12,7 @@
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
+#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/highmem.h>
#include <linux/memstick.h>
@@ -56,8 +57,6 @@ struct jmb38x_ms_host {
unsigned long timeout_jiffies;
struct timer_list timer;
struct memstick_request *req;
- unsigned char eject:1,
- use_dma:1;
unsigned char cmd_flags;
unsigned char io_pos;
unsigned int io_word[2];
@@ -94,9 +93,22 @@ struct jmb38x_ms {
#define HOST_CONTROL_IF_PAR4 0x1
#define HOST_CONTROL_IF_PAR8 0x3
+#define STATUS_BUSY 0x00080000
+#define STATUS_MS_DAT7 0x00040000
+#define STATUS_MS_DAT6 0x00020000
+#define STATUS_MS_DAT5 0x00010000
+#define STATUS_MS_DAT4 0x00008000
+#define STATUS_MS_DAT3 0x00004000
+#define STATUS_MS_DAT2 0x00002000
+#define STATUS_MS_DAT1 0x00001000
+#define STATUS_MS_DAT0 0x00000800
#define STATUS_HAS_MEDIA 0x00000400
#define STATUS_FIFO_EMPTY 0x00000200
#define STATUS_FIFO_FULL 0x00000100
+#define STATUS_MS_CED 0x00000080
+#define STATUS_MS_ERR 0x00000040
+#define STATUS_MS_BRQ 0x00000020
+#define STATUS_MS_CNK 0x00000001
#define INT_STATUS_TPC_ERR 0x00080000
#define INT_STATUS_CRC_ERR 0x00040000
@@ -119,11 +131,17 @@ struct jmb38x_ms {
#define PAD_PU_PD_ON_MS_SOCK0 0x5f8f0000
#define PAD_PU_PD_ON_MS_SOCK1 0x0f0f0000
+#define CLOCK_CONTROL_40MHZ 0x00000001
+#define CLOCK_CONTROL_50MHZ 0x00000002
+#define CLOCK_CONTROL_60MHZ 0x00000008
+#define CLOCK_CONTROL_62_5MHZ 0x0000000c
+#define CLOCK_CONTROL_OFF 0x00000000
+
enum {
CMD_READY = 0x01,
FIFO_READY = 0x02,
REG_DATA = 0x04,
- AUTO_GET_INT = 0x08
+ DMA_DATA = 0x08
};
static unsigned int jmb38x_ms_read_data(struct jmb38x_ms_host *host,
@@ -273,7 +291,7 @@ static int jmb38x_ms_transfer_data(struct jmb38x_ms_host *host)
{
unsigned int length;
unsigned int off;
- unsigned int t_size, p_off, p_cnt;
+ unsigned int t_size, p_cnt;
unsigned char *buf;
struct page *pg;
unsigned long flags = 0;
@@ -287,6 +305,8 @@ static int jmb38x_ms_transfer_data(struct jmb38x_ms_host *host)
}
while (length) {
+ unsigned int uninitialized_var(p_off);
+
if (host->req->long_data) {
pg = nth_page(sg_page(&host->req->sg),
off >> PAGE_SHIFT);
@@ -364,28 +384,27 @@ static int jmb38x_ms_issue_cmd(struct memstick_host *msh)
cmd |= TPC_DIR;
if (host->req->need_card_int)
cmd |= TPC_WAIT_INT;
- if (host->req->get_int_reg)
- cmd |= TPC_GET_INT;
data = host->req->data;
- host->use_dma = !no_dma;
+ if (!no_dma)
+ host->cmd_flags |= DMA_DATA;
if (host->req->long_data) {
data_len = host->req->sg.length;
} else {
data_len = host->req->data_len;
- host->use_dma = 0;
+ host->cmd_flags &= ~DMA_DATA;
}
if (data_len <= 8) {
cmd &= ~(TPC_DATA_SEL | 0xf);
host->cmd_flags |= REG_DATA;
cmd |= data_len & 0xf;
- host->use_dma = 0;
+ host->cmd_flags &= ~DMA_DATA;
}
- if (host->use_dma) {
+ if (host->cmd_flags & DMA_DATA) {
if (1 != pci_map_sg(host->chip->pdev, &host->req->sg, 1,
host->req->data_dir == READ
? PCI_DMA_FROMDEVICE
@@ -448,13 +467,12 @@ static void jmb38x_ms_complete_cmd(struct memstick_host *msh, int last)
readl(host->addr + INT_STATUS));
dev_dbg(msh->cdev.dev, "c hstatus %08x\n", readl(host->addr + STATUS));
- if (host->req->get_int_reg) {
- t_val = readl(host->addr + TPC_P0);
- host->req->int_reg = (t_val & 0xff);
- }
+ host->req->int_reg = readl(host->addr + STATUS) & 0xff;
+
+ writel(0, host->addr + BLOCK);
+ writel(0, host->addr + DMA_CONTROL);
- if (host->use_dma) {
- writel(0, host->addr + DMA_CONTROL);
+ if (host->cmd_flags & DMA_DATA) {
pci_unmap_sg(host->chip->pdev, &host->req->sg, 1,
host->req->data_dir == READ
? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE);
@@ -506,7 +524,7 @@ static irqreturn_t jmb38x_ms_isr(int irq, void *dev_id)
else
host->req->error = -ETIME;
} else {
- if (host->use_dma) {
+ if (host->cmd_flags & DMA_DATA) {
if (irq_status & INT_STATUS_EOTRAN)
host->cmd_flags |= FIFO_READY;
} else {
@@ -595,19 +613,18 @@ static void jmb38x_ms_reset(struct jmb38x_ms_host *host)
{
unsigned int host_ctl = readl(host->addr + HOST_CONTROL);
- writel(host_ctl | HOST_CONTROL_RESET_REQ | HOST_CONTROL_RESET,
- host->addr + HOST_CONTROL);
+ writel(HOST_CONTROL_RESET_REQ, host->addr + HOST_CONTROL);
while (HOST_CONTROL_RESET_REQ
& (host_ctl = readl(host->addr + HOST_CONTROL))) {
- ndelay(100);
- dev_dbg(&host->chip->pdev->dev, "reset\n");
+ ndelay(20);
+ dev_dbg(&host->chip->pdev->dev, "reset %08x\n", host_ctl);
}
- writel(INT_STATUS_ALL, host->addr + INT_STATUS_ENABLE);
+ writel(HOST_CONTROL_RESET, host->addr + HOST_CONTROL);
+ mmiowb();
writel(INT_STATUS_ALL, host->addr + INT_SIGNAL_ENABLE);
-
- dev_dbg(&host->chip->pdev->dev, "reset\n");
+ writel(INT_STATUS_ALL, host->addr + INT_STATUS_ENABLE);
}
static void jmb38x_ms_set_param(struct memstick_host *msh,
@@ -615,10 +632,8 @@ static void jmb38x_ms_set_param(struct memstick_host *msh,
int value)
{
struct jmb38x_ms_host *host = memstick_priv(msh);
- unsigned int host_ctl;
- unsigned long flags;
-
- spin_lock_irqsave(&host->lock, flags);
+ unsigned int host_ctl = readl(host->addr + HOST_CONTROL);
+ unsigned int clock_ctl = CLOCK_CONTROL_40MHZ, clock_delay = 0;
switch (param) {
case MEMSTICK_POWER:
@@ -626,60 +641,57 @@ static void jmb38x_ms_set_param(struct memstick_host *msh,
jmb38x_ms_reset(host);
writel(host->id ? PAD_PU_PD_ON_MS_SOCK1
- : PAD_PU_PD_ON_MS_SOCK0,
+ : PAD_PU_PD_ON_MS_SOCK0,
host->addr + PAD_PU_PD);
writel(PAD_OUTPUT_ENABLE_MS,
host->addr + PAD_OUTPUT_ENABLE);
- host_ctl = readl(host->addr + HOST_CONTROL);
- host_ctl |= 7;
- writel(host_ctl | (HOST_CONTROL_POWER_EN
- | HOST_CONTROL_CLOCK_EN),
- host->addr + HOST_CONTROL);
+ host_ctl = 7;
+ host_ctl |= HOST_CONTROL_POWER_EN
+ | HOST_CONTROL_CLOCK_EN;
+ writel(host_ctl, host->addr + HOST_CONTROL);
dev_dbg(&host->chip->pdev->dev, "power on\n");
} else if (value == MEMSTICK_POWER_OFF) {
- writel(readl(host->addr + HOST_CONTROL)
- & ~(HOST_CONTROL_POWER_EN
- | HOST_CONTROL_CLOCK_EN),
- host->addr + HOST_CONTROL);
+ host_ctl &= ~(HOST_CONTROL_POWER_EN
+ | HOST_CONTROL_CLOCK_EN);
+ writel(host_ctl, host->addr + HOST_CONTROL);
writel(0, host->addr + PAD_OUTPUT_ENABLE);
writel(PAD_PU_PD_OFF, host->addr + PAD_PU_PD);
dev_dbg(&host->chip->pdev->dev, "power off\n");
}
break;
case MEMSTICK_INTERFACE:
- /* jmb38x_ms_reset(host); */
-
- host_ctl = readl(host->addr + HOST_CONTROL);
host_ctl &= ~(3 << HOST_CONTROL_IF_SHIFT);
- /* host_ctl |= 7; */
if (value == MEMSTICK_SERIAL) {
host_ctl &= ~HOST_CONTROL_FAST_CLK;
host_ctl |= HOST_CONTROL_IF_SERIAL
<< HOST_CONTROL_IF_SHIFT;
host_ctl |= HOST_CONTROL_REI;
- writel(0, host->addr + CLOCK_DELAY);
+ clock_ctl = CLOCK_CONTROL_40MHZ;
+ clock_delay = 0;
} else if (value == MEMSTICK_PAR4) {
host_ctl |= HOST_CONTROL_FAST_CLK;
host_ctl |= HOST_CONTROL_IF_PAR4
<< HOST_CONTROL_IF_SHIFT;
host_ctl &= ~HOST_CONTROL_REI;
- writel(4, host->addr + CLOCK_DELAY);
+ clock_ctl = CLOCK_CONTROL_40MHZ;
+ clock_delay = 4;
} else if (value == MEMSTICK_PAR8) {
host_ctl |= HOST_CONTROL_FAST_CLK;
host_ctl |= HOST_CONTROL_IF_PAR8
<< HOST_CONTROL_IF_SHIFT;
host_ctl &= ~HOST_CONTROL_REI;
- writel(4, host->addr + CLOCK_DELAY);
+ clock_ctl = CLOCK_CONTROL_60MHZ;
+ clock_delay = 0;
}
writel(host_ctl, host->addr + HOST_CONTROL);
+ writel(clock_ctl, host->addr + CLOCK_CONTROL);
+ writel(clock_delay, host->addr + CLOCK_DELAY);
break;
};
-
- spin_unlock_irqrestore(&host->lock, flags);
}
#ifdef CONFIG_PM
@@ -772,13 +784,10 @@ static struct memstick_host *jmb38x_ms_alloc_host(struct jmb38x_ms *jm, int cnt)
snprintf(host->host_id, DEVICE_ID_SIZE, DRIVER_NAME ":slot%d",
host->id);
host->irq = jm->pdev->irq;
- host->timeout_jiffies = msecs_to_jiffies(4000);
+ host->timeout_jiffies = msecs_to_jiffies(1000);
msh->request = jmb38x_ms_request;
msh->set_param = jmb38x_ms_set_param;
- /*
- msh->caps = MEMSTICK_CAP_AUTO_GET_INT | MEMSTICK_CAP_PAR4
- | MEMSTICK_CAP_PAR8;
- */
+
msh->caps = MEMSTICK_CAP_PAR4 | MEMSTICK_CAP_PAR8;
setup_timer(&host->timer, jmb38x_ms_abort, (unsigned long)msh);
diff --git a/drivers/memstick/host/tifm_ms.c b/drivers/memstick/host/tifm_ms.c
index 2b5bf52a830..8577de4ebb0 100644
--- a/drivers/memstick/host/tifm_ms.c
+++ b/drivers/memstick/host/tifm_ms.c
@@ -182,7 +182,7 @@ static unsigned int tifm_ms_transfer_data(struct tifm_ms *host)
struct tifm_dev *sock = host->dev;
unsigned int length;
unsigned int off;
- unsigned int t_size, p_off, p_cnt;
+ unsigned int t_size, p_cnt;
unsigned char *buf;
struct page *pg;
unsigned long flags = 0;
@@ -198,6 +198,8 @@ static unsigned int tifm_ms_transfer_data(struct tifm_ms *host)
host->block_pos);
while (length) {
+ unsigned int uninitialized_var(p_off);
+
if (host->req->long_data) {
pg = nth_page(sg_page(&host->req->sg),
off >> PAGE_SHIFT);
@@ -340,11 +342,20 @@ static void tifm_ms_complete_cmd(struct tifm_ms *host)
del_timer(&host->timer);
- if (host->use_dma)
+ host->req->int_reg = readl(sock->addr + SOCK_MS_STATUS) & 0xff;
+ host->req->int_reg = (host->req->int_reg & 1)
+ | ((host->req->int_reg << 4) & 0xe0);
+
+ writel(TIFM_FIFO_INT_SETALL,
+ sock->addr + SOCK_DMA_FIFO_INT_ENABLE_CLEAR);
+ writel(TIFM_DMA_RESET, sock->addr + SOCK_DMA_CONTROL);
+
+ if (host->use_dma) {
tifm_unmap_sg(sock, &host->req->sg, 1,
host->req->data_dir == READ
? PCI_DMA_FROMDEVICE
: PCI_DMA_TODEVICE);
+ }
writel((~TIFM_CTRL_LED) & readl(sock->addr + SOCK_CONTROL),
sock->addr + SOCK_CONTROL);
@@ -424,12 +435,6 @@ static void tifm_ms_card_event(struct tifm_dev *sock)
else if (host_status & TIFM_MS_STAT_CRC)
host->req->error = -EILSEQ;
- if (host->req->error) {
- writel(TIFM_FIFO_INT_SETALL,
- sock->addr + SOCK_DMA_FIFO_INT_ENABLE_CLEAR);
- writel(TIFM_DMA_RESET, sock->addr + SOCK_DMA_CONTROL);
- }
-
if (host_status & TIFM_MS_STAT_RDY)
host->cmd_flags |= CMD_READY;
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 6b6df867958..c6be6eba7dc 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -1430,6 +1430,98 @@ mpt_get_product_name(u16 vendor, u16 device, u8 revision, char *prod_name)
sprintf(prod_name, "%s", product_str);
}
+/**
+ * mpt_mapresources - map in memory mapped io
+ * @ioc: Pointer to pointer to IOC adapter
+ *
+ **/
+static int
+mpt_mapresources(MPT_ADAPTER *ioc)
+{
+ u8 __iomem *mem;
+ int ii;
+ unsigned long mem_phys;
+ unsigned long port;
+ u32 msize;
+ u32 psize;
+ u8 revision;
+ int r = -ENODEV;
+ struct pci_dev *pdev;
+
+ pdev = ioc->pcidev;
+ ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
+ if (pci_enable_device_mem(pdev)) {
+ printk(MYIOC_s_ERR_FMT "pci_enable_device_mem() "
+ "failed\n", ioc->name);
+ return r;
+ }
+ if (pci_request_selected_regions(pdev, ioc->bars, "mpt")) {
+ printk(MYIOC_s_ERR_FMT "pci_request_selected_regions() with "
+ "MEM failed\n", ioc->name);
+ return r;
+ }
+
+ pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
+
+ if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)
+ && !pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) {
+ dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+ ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
+ ioc->name));
+ } else if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)
+ && !pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) {
+ dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+ ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
+ ioc->name));
+ } else {
+ printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
+ ioc->name, pci_name(pdev));
+ pci_release_selected_regions(pdev, ioc->bars);
+ return r;
+ }
+
+ mem_phys = msize = 0;
+ port = psize = 0;
+ for (ii = 0; ii < DEVICE_COUNT_RESOURCE; ii++) {
+ if (pci_resource_flags(pdev, ii) & PCI_BASE_ADDRESS_SPACE_IO) {
+ if (psize)
+ continue;
+ /* Get I/O space! */
+ port = pci_resource_start(pdev, ii);
+ psize = pci_resource_len(pdev, ii);
+ } else {
+ if (msize)
+ continue;
+ /* Get memmap */
+ mem_phys = pci_resource_start(pdev, ii);
+ msize = pci_resource_len(pdev, ii);
+ }
+ }
+ ioc->mem_size = msize;
+
+ mem = NULL;
+ /* Get logical ptr for PciMem0 space */
+ /*mem = ioremap(mem_phys, msize);*/
+ mem = ioremap(mem_phys, msize);
+ if (mem == NULL) {
+ printk(MYIOC_s_ERR_FMT ": ERROR - Unable to map adapter"
+ " memory!\n", ioc->name);
+ return -EINVAL;
+ }
+ ioc->memmap = mem;
+ dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %lx\n",
+ ioc->name, mem, mem_phys));
+
+ ioc->mem_phys = mem_phys;
+ ioc->chip = (SYSIF_REGS __iomem *)mem;
+
+ /* Save Port IO values in case we need to do downloadboot */
+ ioc->pio_mem_phys = port;
+ ioc->pio_chip = (SYSIF_REGS __iomem *)port;
+
+ return 0;
+}
+
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mpt_attach - Install a PCI intelligent MPT adapter.
@@ -1452,13 +1544,6 @@ int
mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
{
MPT_ADAPTER *ioc;
- u8 __iomem *mem;
- u8 __iomem *pmem;
- unsigned long mem_phys;
- unsigned long port;
- u32 msize;
- u32 psize;
- int ii;
u8 cb_idx;
int r = -ENODEV;
u8 revision;
@@ -1468,52 +1553,32 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
struct proc_dir_entry *dent, *ent;
#endif
- if (mpt_debug_level)
- printk(KERN_INFO MYNAM ": mpt_debug_level=%xh\n", mpt_debug_level);
-
ioc = kzalloc(sizeof(MPT_ADAPTER), GFP_ATOMIC);
if (ioc == NULL) {
printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n");
return -ENOMEM;
}
- ioc->debug_level = mpt_debug_level;
+
ioc->id = mpt_ids++;
sprintf(ioc->name, "ioc%d", ioc->id);
- ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
- if (pci_enable_device_mem(pdev)) {
- printk(MYIOC_s_ERR_FMT "pci_enable_device_mem() "
- "failed\n", ioc->name);
- kfree(ioc);
- return r;
- }
- if (pci_request_selected_regions(pdev, ioc->bars, "mpt")) {
- printk(MYIOC_s_ERR_FMT "pci_request_selected_regions() with "
- "MEM failed\n", ioc->name);
- kfree(ioc);
- return r;
- }
+ /*
+ * set initial debug level
+ * (refer to mptdebug.h)
+ *
+ */
+ ioc->debug_level = mpt_debug_level;
+ if (mpt_debug_level)
+ printk(KERN_INFO "mpt_debug_level=%xh\n", mpt_debug_level);
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": mpt_adapter_install\n", ioc->name));
- if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
- dprintk(ioc, printk(MYIOC_s_INFO_FMT
- ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n", ioc->name));
- } else if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
- printk(MYIOC_s_WARN_FMT ": 32 BIT PCI BUS DMA ADDRESSING NOT SUPPORTED\n",
- ioc->name);
+ ioc->pcidev = pdev;
+ if (mpt_mapresources(ioc)) {
kfree(ioc);
return r;
}
- if (!pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) {
- dprintk(ioc, printk(MYIOC_s_INFO_FMT
- ": Using 64 bit consistent mask\n", ioc->name));
- } else {
- dprintk(ioc, printk(MYIOC_s_INFO_FMT
- ": Not using 64 bit consistent mask\n", ioc->name));
- }
-
ioc->alloc_total = sizeof(MPT_ADAPTER);
ioc->req_sz = MPT_DEFAULT_FRAME_SIZE; /* avoid div by zero! */
ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
@@ -1551,48 +1616,9 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
/* Find lookup slot. */
INIT_LIST_HEAD(&ioc->list);
- mem_phys = msize = 0;
- port = psize = 0;
- for (ii=0; ii < DEVICE_COUNT_RESOURCE; ii++) {
- if (pci_resource_flags(pdev, ii) & PCI_BASE_ADDRESS_SPACE_IO) {
- if (psize)
- continue;
- /* Get I/O space! */
- port = pci_resource_start(pdev, ii);
- psize = pci_resource_len(pdev,ii);
- } else {
- if (msize)
- continue;
- /* Get memmap */
- mem_phys = pci_resource_start(pdev, ii);
- msize = pci_resource_len(pdev,ii);
- }
- }
- ioc->mem_size = msize;
-
- mem = NULL;
- /* Get logical ptr for PciMem0 space */
- /*mem = ioremap(mem_phys, msize);*/
- mem = ioremap(mem_phys, msize);
- if (mem == NULL) {
- printk(MYIOC_s_ERR_FMT "Unable to map adapter memory!\n", ioc->name);
- kfree(ioc);
- return -EINVAL;
- }
- ioc->memmap = mem;
- dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %lx\n", ioc->name, mem, mem_phys));
-
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "facts @ %p, pfacts[0] @ %p\n",
ioc->name, &ioc->facts, &ioc->pfacts[0]));
- ioc->mem_phys = mem_phys;
- ioc->chip = (SYSIF_REGS __iomem *)mem;
-
- /* Save Port IO values in case we need to do downloadboot */
- ioc->pio_mem_phys = port;
- pmem = (u8 __iomem *)port;
- ioc->pio_chip = (SYSIF_REGS __iomem *)pmem;
-
pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
mpt_get_product_name(pdev->vendor, pdev->device, revision, ioc->prod_name);
@@ -1688,7 +1714,9 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
list_del(&ioc->list);
if (ioc->alt_ioc)
ioc->alt_ioc->alt_ioc = NULL;
- iounmap(mem);
+ iounmap(ioc->memmap);
+ if (r != -5)
+ pci_release_selected_regions(pdev, ioc->bars);
kfree(ioc);
pci_set_drvdata(pdev, NULL);
return r;
@@ -1784,13 +1812,10 @@ mpt_suspend(struct pci_dev *pdev, pm_message_t state)
u32 device_state;
MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
- device_state=pci_choose_state(pdev, state);
-
- printk(MYIOC_s_INFO_FMT
- "pci-suspend: pdev=0x%p, slot=%s, Entering operating state [D%d]\n",
- ioc->name, pdev, pci_name(pdev), device_state);
-
- pci_save_state(pdev);
+ device_state = pci_choose_state(pdev, state);
+ printk(MYIOC_s_INFO_FMT "pci-suspend: pdev=0x%p, slot=%s, Entering "
+ "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
+ device_state);
/* put ioc into READY_STATE */
if(SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, CAN_SLEEP)) {
@@ -1805,10 +1830,14 @@ mpt_suspend(struct pci_dev *pdev, pm_message_t state)
/* Clear any lingering interrupt */
CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+ free_irq(ioc->pci_irq, ioc);
+ if (mpt_msi_enable)
+ pci_disable_msi(ioc->pcidev);
+ ioc->pci_irq = -1;
+ pci_save_state(pdev);
pci_disable_device(pdev);
pci_release_selected_regions(pdev, ioc->bars);
pci_set_power_state(pdev, device_state);
-
return 0;
}
@@ -1823,48 +1852,54 @@ mpt_resume(struct pci_dev *pdev)
MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
u32 device_state = pdev->current_state;
int recovery_state;
+ int err;
- printk(MYIOC_s_INFO_FMT
- "pci-resume: pdev=0x%p, slot=%s, Previous operating state [D%d]\n",
- ioc->name, pdev, pci_name(pdev), device_state);
+ printk(MYIOC_s_INFO_FMT "pci-resume: pdev=0x%p, slot=%s, Previous "
+ "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
+ device_state);
- pci_set_power_state(pdev, 0);
+ pci_set_power_state(pdev, PCI_D0);
+ pci_enable_wake(pdev, PCI_D0, 0);
pci_restore_state(pdev);
- if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT) {
- ioc->bars = pci_select_bars(ioc->pcidev, IORESOURCE_MEM |
- IORESOURCE_IO);
- if (pci_enable_device(pdev))
- return 0;
- } else {
- ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
- if (pci_enable_device_mem(pdev))
- return 0;
- }
- if (pci_request_selected_regions(pdev, ioc->bars, "mpt"))
- return 0;
+ ioc->pcidev = pdev;
+ err = mpt_mapresources(ioc);
+ if (err)
+ return err;
- /* enable interrupts */
- CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
- ioc->active = 1;
+ printk(MYIOC_s_INFO_FMT "pci-resume: ioc-state=0x%x,doorbell=0x%x\n",
+ ioc->name, (mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT),
+ CHIPREG_READ32(&ioc->chip->Doorbell));
- printk(MYIOC_s_INFO_FMT
- "pci-resume: ioc-state=0x%x,doorbell=0x%x\n",
- ioc->name,
- (mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT),
- CHIPREG_READ32(&ioc->chip->Doorbell));
+ /*
+ * Errata workaround for SAS pci express:
+ * Upon returning to the D0 state, the contents of the doorbell will be
+ * stale data, and this will incorrectly signal to the host driver that
+ * the firmware is ready to process mpt commands. The workaround is
+ * to issue a diagnostic reset.
+ */
+ if (ioc->bus_type == SAS && (pdev->device ==
+ MPI_MANUFACTPAGE_DEVID_SAS1068E || pdev->device ==
+ MPI_MANUFACTPAGE_DEVID_SAS1064E)) {
+ if (KickStart(ioc, 1, CAN_SLEEP) < 0) {
+ printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover\n",
+ ioc->name);
+ goto out;
+ }
+ }
/* bring ioc to operational state */
- if ((recovery_state = mpt_do_ioc_recovery(ioc,
- MPT_HOSTEVENT_IOC_RECOVER, CAN_SLEEP)) != 0) {
- printk(MYIOC_s_INFO_FMT
- "pci-resume: Cannot recover, error:[%x]\n",
- ioc->name, recovery_state);
- } else {
+ printk(MYIOC_s_INFO_FMT "Sending mpt_do_ioc_recovery\n", ioc->name);
+ recovery_state = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
+ CAN_SLEEP);
+ if (recovery_state != 0)
+ printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover, "
+ "error:[%x]\n", ioc->name, recovery_state);
+ else
printk(MYIOC_s_INFO_FMT
- "pci-resume: success\n", ioc->name);
- }
-
+ "pci-resume: success\n", ioc->name);
+ out:
return 0;
+
}
#endif
@@ -1903,6 +1938,7 @@ mpt_signal_reset(u8 index, MPT_ADAPTER *ioc, int reset_phase)
* -3 if READY but PrimeIOCFifos Failed
* -4 if READY but IOCInit Failed
* -5 if failed to enable_device and/or request_selected_regions
+ * -6 if failed to upload firmware
*/
static int
mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
@@ -2097,7 +2133,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
} else {
printk(MYIOC_s_WARN_FMT
"firmware upload failure!\n", ioc->name);
- ret = -5;
+ ret = -6;
}
}
}
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index 0c252f60c4c..c207bda6723 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -1170,6 +1170,10 @@ mptscsih_shutdown(struct pci_dev *pdev)
int
mptscsih_suspend(struct pci_dev *pdev, pm_message_t state)
{
+ MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
+
+ scsi_block_requests(ioc->sh);
+ flush_scheduled_work();
mptscsih_shutdown(pdev);
return mpt_suspend(pdev,state);
}
@@ -1183,7 +1187,12 @@ mptscsih_suspend(struct pci_dev *pdev, pm_message_t state)
int
mptscsih_resume(struct pci_dev *pdev)
{
- return mpt_resume(pdev);
+ MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
+ int rc;
+
+ rc = mpt_resume(pdev);
+ scsi_unblock_requests(ioc->sh);
+ return rc;
}
#endif
diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index 63fb1ff3ad1..f6f2d960cad 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -28,14 +28,14 @@
static inline void asic3_write_register(struct asic3 *asic,
unsigned int reg, u32 value)
{
- iowrite16(value, (unsigned long)asic->mapping +
+ iowrite16(value, asic->mapping +
(reg >> asic->bus_shift));
}
static inline u32 asic3_read_register(struct asic3 *asic,
unsigned int reg)
{
- return ioread16((unsigned long)asic->mapping +
+ return ioread16(asic->mapping +
(reg >> asic->bus_shift));
}
diff --git a/drivers/misc/fujitsu-laptop.c b/drivers/misc/fujitsu-laptop.c
index 1cfd7f3f129..e2e7c05a147 100644
--- a/drivers/misc/fujitsu-laptop.c
+++ b/drivers/misc/fujitsu-laptop.c
@@ -231,7 +231,7 @@ static int acpi_fujitsu_remove(struct acpi_device *device, int type)
if (!device || !acpi_driver_data(device))
return -EINVAL;
- fujitsu->acpi_handle = 0;
+ fujitsu->acpi_handle = NULL;
return 0;
}
diff --git a/drivers/misc/ibmasm/module.c b/drivers/misc/ibmasm/module.c
index 4f9d4a9da98..b5f6add34b0 100644
--- a/drivers/misc/ibmasm/module.c
+++ b/drivers/misc/ibmasm/module.c
@@ -106,7 +106,7 @@ static int __devinit ibmasm_init_one(struct pci_dev *pdev, const struct pci_devi
sp->irq = pdev->irq;
sp->base_address = ioremap(pci_resource_start(pdev, 0),
pci_resource_len(pdev, 0));
- if (sp->base_address == 0) {
+ if (!sp->base_address) {
dev_err(sp->dev, "Failed to ioremap pci memory\n");
result = -ENODEV;
goto error_ioremap;
diff --git a/drivers/misc/lkdtm.c b/drivers/misc/lkdtm.c
index c884730c5ea..1bfe5d16963 100644
--- a/drivers/misc/lkdtm.c
+++ b/drivers/misc/lkdtm.c
@@ -197,7 +197,7 @@ static int lkdtm_parse_commandline(void)
{
int i;
- if (cpoint_name == INVALID || cpoint_type == NONE ||
+ if (cpoint_name == NULL || cpoint_type == NULL ||
cpoint_count < 1 || recur_count < 1)
return -EINVAL;
diff --git a/drivers/mmc/core/Makefile b/drivers/mmc/core/Makefile
index 4985807257a..19a1a254a0c 100644
--- a/drivers/mmc/core/Makefile
+++ b/drivers/mmc/core/Makefile
@@ -7,7 +7,7 @@ ifeq ($(CONFIG_MMC_DEBUG),y)
endif
obj-$(CONFIG_MMC) += mmc_core.o
-mmc_core-y := core.o sysfs.o bus.o host.o \
+mmc_core-y := core.o bus.o host.o \
mmc.o mmc_ops.o sd.o sd_ops.o \
sdio.o sdio_ops.o sdio_bus.o \
sdio_cis.o sdio_io.o sdio_irq.o
diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
index b0c22cad942..fd95b18e988 100644
--- a/drivers/mmc/core/bus.c
+++ b/drivers/mmc/core/bus.c
@@ -17,7 +17,6 @@
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
-#include "sysfs.h"
#include "core.h"
#include "sdio_cis.h"
#include "bus.h"
@@ -43,7 +42,7 @@ static ssize_t mmc_type_show(struct device *dev,
}
static struct device_attribute mmc_dev_attrs[] = {
- MMC_ATTR_RO(type),
+ __ATTR(type, S_IRUGO, mmc_type_show, NULL),
__ATTR_NULL,
};
@@ -189,7 +188,7 @@ static void mmc_release_card(struct device *dev)
/*
* Allocate and initialise a new MMC card structure.
*/
-struct mmc_card *mmc_alloc_card(struct mmc_host *host)
+struct mmc_card *mmc_alloc_card(struct mmc_host *host, struct device_type *type)
{
struct mmc_card *card;
@@ -204,6 +203,7 @@ struct mmc_card *mmc_alloc_card(struct mmc_host *host)
card->dev.parent = mmc_classdev(host);
card->dev.bus = &mmc_bus_type;
card->dev.release = mmc_release_card;
+ card->dev.type = type;
return card;
}
@@ -248,24 +248,10 @@ int mmc_add_card(struct mmc_card *card)
type, card->rca);
}
- card->dev.uevent_suppress = 1;
-
ret = device_add(&card->dev);
if (ret)
return ret;
- if (card->host->bus_ops->sysfs_add) {
- ret = card->host->bus_ops->sysfs_add(card->host, card);
- if (ret) {
- device_del(&card->dev);
- return ret;
- }
- }
-
- card->dev.uevent_suppress = 0;
-
- kobject_uevent(&card->dev.kobj, KOBJ_ADD);
-
mmc_card_set_present(card);
return 0;
@@ -285,9 +271,6 @@ void mmc_remove_card(struct mmc_card *card)
printk(KERN_INFO "%s: card %04x removed\n",
mmc_hostname(card->host), card->rca);
}
-
- if (card->host->bus_ops->sysfs_remove)
- card->host->bus_ops->sysfs_remove(card->host, card);
device_del(&card->dev);
}
diff --git a/drivers/mmc/core/bus.h b/drivers/mmc/core/bus.h
index 4f35431116a..18178766ab4 100644
--- a/drivers/mmc/core/bus.h
+++ b/drivers/mmc/core/bus.h
@@ -11,7 +11,16 @@
#ifndef _MMC_CORE_BUS_H
#define _MMC_CORE_BUS_H
-struct mmc_card *mmc_alloc_card(struct mmc_host *host);
+#define MMC_DEV_ATTR(name, fmt, args...) \
+static ssize_t mmc_##name##_show (struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+ struct mmc_card *card = container_of(dev, struct mmc_card, dev); \
+ return sprintf(buf, fmt, args); \
+} \
+static DEVICE_ATTR(name, S_IRUGO, mmc_##name##_show, NULL)
+
+struct mmc_card *mmc_alloc_card(struct mmc_host *host,
+ struct device_type *type);
int mmc_add_card(struct mmc_card *card);
void mmc_remove_card(struct mmc_card *card);
diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h
index 39daf2fb5dc..cfa8e15b592 100644
--- a/drivers/mmc/core/core.h
+++ b/drivers/mmc/core/core.h
@@ -18,8 +18,6 @@
struct mmc_bus_ops {
void (*remove)(struct mmc_host *);
void (*detect)(struct mmc_host *);
- int (*sysfs_add)(struct mmc_host *, struct mmc_card *card);
- void (*sysfs_remove)(struct mmc_host *, struct mmc_card *card);
void (*suspend)(struct mmc_host *);
void (*resume)(struct mmc_host *);
};
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 68c0e3b2f0e..3da29eef8f7 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -17,7 +17,6 @@
#include <linux/mmc/mmc.h>
#include "core.h"
-#include "sysfs.h"
#include "bus.h"
#include "mmc_ops.h"
@@ -248,6 +247,44 @@ out:
return err;
}
+MMC_DEV_ATTR(cid, "%08x%08x%08x%08x\n", card->raw_cid[0], card->raw_cid[1],
+ card->raw_cid[2], card->raw_cid[3]);
+MMC_DEV_ATTR(csd, "%08x%08x%08x%08x\n", card->raw_csd[0], card->raw_csd[1],
+ card->raw_csd[2], card->raw_csd[3]);
+MMC_DEV_ATTR(date, "%02d/%04d\n", card->cid.month, card->cid.year);
+MMC_DEV_ATTR(fwrev, "0x%x\n", card->cid.fwrev);
+MMC_DEV_ATTR(hwrev, "0x%x\n", card->cid.hwrev);
+MMC_DEV_ATTR(manfid, "0x%06x\n", card->cid.manfid);
+MMC_DEV_ATTR(name, "%s\n", card->cid.prod_name);
+MMC_DEV_ATTR(oemid, "0x%04x\n", card->cid.oemid);
+MMC_DEV_ATTR(serial, "0x%08x\n", card->cid.serial);
+
+static struct attribute *mmc_std_attrs[] = {
+ &dev_attr_cid.attr,
+ &dev_attr_csd.attr,
+ &dev_attr_date.attr,
+ &dev_attr_fwrev.attr,
+ &dev_attr_hwrev.attr,
+ &dev_attr_manfid.attr,
+ &dev_attr_name.attr,
+ &dev_attr_oemid.attr,
+ &dev_attr_serial.attr,
+ NULL,
+};
+
+static struct attribute_group mmc_std_attr_group = {
+ .attrs = mmc_std_attrs,
+};
+
+static struct attribute_group *mmc_attr_groups[] = {
+ &mmc_std_attr_group,
+ NULL,
+};
+
+static struct device_type mmc_type = {
+ .groups = mmc_attr_groups,
+};
+
/*
* Handle the detection and initialisation of a card.
*
@@ -308,7 +345,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
/*
* Allocate card structure.
*/
- card = mmc_alloc_card(host);
+ card = mmc_alloc_card(host, &mmc_type);
if (IS_ERR(card)) {
err = PTR_ERR(card);
goto err;
@@ -459,53 +496,6 @@ static void mmc_detect(struct mmc_host *host)
}
}
-MMC_ATTR_FN(cid, "%08x%08x%08x%08x\n", card->raw_cid[0], card->raw_cid[1],
- card->raw_cid[2], card->raw_cid[3]);
-MMC_ATTR_FN(csd, "%08x%08x%08x%08x\n", card->raw_csd[0], card->raw_csd[1],
- card->raw_csd[2], card->raw_csd[3]);
-MMC_ATTR_FN(date, "%02d/%04d\n", card->cid.month, card->cid.year);
-MMC_ATTR_FN(fwrev, "0x%x\n", card->cid.fwrev);
-MMC_ATTR_FN(hwrev, "0x%x\n", card->cid.hwrev);
-MMC_ATTR_FN(manfid, "0x%06x\n", card->cid.manfid);
-MMC_ATTR_FN(name, "%s\n", card->cid.prod_name);
-MMC_ATTR_FN(oemid, "0x%04x\n", card->cid.oemid);
-MMC_ATTR_FN(serial, "0x%08x\n", card->cid.serial);
-
-static struct device_attribute mmc_dev_attrs[] = {
- MMC_ATTR_RO(cid),
- MMC_ATTR_RO(csd),
- MMC_ATTR_RO(date),
- MMC_ATTR_RO(fwrev),
- MMC_ATTR_RO(hwrev),
- MMC_ATTR_RO(manfid),
- MMC_ATTR_RO(name),
- MMC_ATTR_RO(oemid),
- MMC_ATTR_RO(serial),
- __ATTR_NULL,
-};
-
-/*
- * Adds sysfs entries as relevant.
- */
-static int mmc_sysfs_add(struct mmc_host *host, struct mmc_card *card)
-{
- int ret;
-
- ret = mmc_add_attrs(card, mmc_dev_attrs);
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
-/*
- * Removes the sysfs entries added by mmc_sysfs_add().
- */
-static void mmc_sysfs_remove(struct mmc_host *host, struct mmc_card *card)
-{
- mmc_remove_attrs(card, mmc_dev_attrs);
-}
-
#ifdef CONFIG_MMC_UNSAFE_RESUME
/*
@@ -560,8 +550,6 @@ static void mmc_resume(struct mmc_host *host)
static const struct mmc_bus_ops mmc_ops = {
.remove = mmc_remove,
.detect = mmc_detect,
- .sysfs_add = mmc_sysfs_add,
- .sysfs_remove = mmc_sysfs_remove,
.suspend = mmc_suspend,
.resume = mmc_resume,
};
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index d1c1e0f592f..7ef3b15c5e3 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -18,7 +18,6 @@
#include <linux/mmc/sd.h>
#include "core.h"
-#include "sysfs.h"
#include "bus.h"
#include "mmc_ops.h"
#include "sd_ops.h"
@@ -283,6 +282,47 @@ out:
return err;
}
+MMC_DEV_ATTR(cid, "%08x%08x%08x%08x\n", card->raw_cid[0], card->raw_cid[1],
+ card->raw_cid[2], card->raw_cid[3]);
+MMC_DEV_ATTR(csd, "%08x%08x%08x%08x\n", card->raw_csd[0], card->raw_csd[1],
+ card->raw_csd[2], card->raw_csd[3]);
+MMC_DEV_ATTR(scr, "%08x%08x\n", card->raw_scr[0], card->raw_scr[1]);
+MMC_DEV_ATTR(date, "%02d/%04d\n", card->cid.month, card->cid.year);
+MMC_DEV_ATTR(fwrev, "0x%x\n", card->cid.fwrev);
+MMC_DEV_ATTR(hwrev, "0x%x\n", card->cid.hwrev);
+MMC_DEV_ATTR(manfid, "0x%06x\n", card->cid.manfid);
+MMC_DEV_ATTR(name, "%s\n", card->cid.prod_name);
+MMC_DEV_ATTR(oemid, "0x%04x\n", card->cid.oemid);
+MMC_DEV_ATTR(serial, "0x%08x\n", card->cid.serial);
+
+
+static struct attribute *sd_std_attrs[] = {
+ &dev_attr_cid.attr,
+ &dev_attr_csd.attr,
+ &dev_attr_scr.attr,
+ &dev_attr_date.attr,
+ &dev_attr_fwrev.attr,
+ &dev_attr_hwrev.attr,
+ &dev_attr_manfid.attr,
+ &dev_attr_name.attr,
+ &dev_attr_oemid.attr,
+ &dev_attr_serial.attr,
+ NULL,
+};
+
+static struct attribute_group sd_std_attr_group = {
+ .attrs = sd_std_attrs,
+};
+
+static struct attribute_group *sd_attr_groups[] = {
+ &sd_std_attr_group,
+ NULL,
+};
+
+static struct device_type sd_type = {
+ .groups = sd_attr_groups,
+};
+
/*
* Handle the detection and initialisation of a card.
*
@@ -352,7 +392,7 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
/*
* Allocate card structure.
*/
- card = mmc_alloc_card(host);
+ card = mmc_alloc_card(host, &sd_type);
if (IS_ERR(card)) {
err = PTR_ERR(card);
goto err;
@@ -518,55 +558,6 @@ static void mmc_sd_detect(struct mmc_host *host)
}
}
-MMC_ATTR_FN(cid, "%08x%08x%08x%08x\n", card->raw_cid[0], card->raw_cid[1],
- card->raw_cid[2], card->raw_cid[3]);
-MMC_ATTR_FN(csd, "%08x%08x%08x%08x\n", card->raw_csd[0], card->raw_csd[1],
- card->raw_csd[2], card->raw_csd[3]);
-MMC_ATTR_FN(scr, "%08x%08x\n", card->raw_scr[0], card->raw_scr[1]);
-MMC_ATTR_FN(date, "%02d/%04d\n", card->cid.month, card->cid.year);
-MMC_ATTR_FN(fwrev, "0x%x\n", card->cid.fwrev);
-MMC_ATTR_FN(hwrev, "0x%x\n", card->cid.hwrev);
-MMC_ATTR_FN(manfid, "0x%06x\n", card->cid.manfid);
-MMC_ATTR_FN(name, "%s\n", card->cid.prod_name);
-MMC_ATTR_FN(oemid, "0x%04x\n", card->cid.oemid);
-MMC_ATTR_FN(serial, "0x%08x\n", card->cid.serial);
-
-static struct device_attribute mmc_sd_dev_attrs[] = {
- MMC_ATTR_RO(cid),
- MMC_ATTR_RO(csd),
- MMC_ATTR_RO(scr),
- MMC_ATTR_RO(date),
- MMC_ATTR_RO(fwrev),
- MMC_ATTR_RO(hwrev),
- MMC_ATTR_RO(manfid),
- MMC_ATTR_RO(name),
- MMC_ATTR_RO(oemid),
- MMC_ATTR_RO(serial),
- __ATTR_NULL,
-};
-
-/*
- * Adds sysfs entries as relevant.
- */
-static int mmc_sd_sysfs_add(struct mmc_host *host, struct mmc_card *card)
-{
- int ret;
-
- ret = mmc_add_attrs(card, mmc_sd_dev_attrs);
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
-/*
- * Removes the sysfs entries added by mmc_sysfs_add().
- */
-static void mmc_sd_sysfs_remove(struct mmc_host *host, struct mmc_card *card)
-{
- mmc_remove_attrs(card, mmc_sd_dev_attrs);
-}
-
#ifdef CONFIG_MMC_UNSAFE_RESUME
/*
@@ -621,8 +612,6 @@ static void mmc_sd_resume(struct mmc_host *host)
static const struct mmc_bus_ops mmc_sd_ops = {
.remove = mmc_sd_remove,
.detect = mmc_sd_detect,
- .sysfs_add = mmc_sd_sysfs_add,
- .sysfs_remove = mmc_sd_sysfs_remove,
.suspend = mmc_sd_suspend,
.resume = mmc_sd_resume,
};
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 87a50f456ef..4eab79e09cc 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -287,7 +287,7 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr)
/*
* Allocate card structure.
*/
- card = mmc_alloc_card(host);
+ card = mmc_alloc_card(host, NULL);
if (IS_ERR(card)) {
err = PTR_ERR(card);
goto err;
diff --git a/drivers/mmc/core/sysfs.c b/drivers/mmc/core/sysfs.c
deleted file mode 100644
index 00a97e70f91..00000000000
--- a/drivers/mmc/core/sysfs.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * linux/drivers/mmc/core/sysfs.c
- *
- * Copyright (C) 2003 Russell King, All Rights Reserved.
- * Copyright 2007 Pierre Ossman
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * MMC sysfs/driver model support.
- */
-#include <linux/device.h>
-
-#include <linux/mmc/card.h>
-
-#include "sysfs.h"
-
-int mmc_add_attrs(struct mmc_card *card, struct device_attribute *attrs)
-{
- int error = 0;
- int i;
-
- for (i = 0; attr_name(attrs[i]); i++) {
- error = device_create_file(&card->dev, &attrs[i]);
- if (error) {
- while (--i >= 0)
- device_remove_file(&card->dev, &attrs[i]);
- break;
- }
- }
-
- return error;
-}
-
-void mmc_remove_attrs(struct mmc_card *card, struct device_attribute *attrs)
-{
- int i;
-
- for (i = 0; attr_name(attrs[i]); i++)
- device_remove_file(&card->dev, &attrs[i]);
-}
-
diff --git a/drivers/mmc/core/sysfs.h b/drivers/mmc/core/sysfs.h
deleted file mode 100644
index 4b8f670bd10..00000000000
--- a/drivers/mmc/core/sysfs.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * linux/drivers/mmc/core/sysfs.h
- *
- * Copyright (C) 2003 Russell King, All Rights Reserved.
- * Copyright 2007 Pierre Ossman
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _MMC_CORE_SYSFS_H
-#define _MMC_CORE_SYSFS_H
-
-#define MMC_ATTR_FN(name, fmt, args...) \
-static ssize_t mmc_##name##_show (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct mmc_card *card = container_of(dev, struct mmc_card, dev);\
- return sprintf(buf, fmt, args); \
-}
-
-#define MMC_ATTR_RO(name) __ATTR(name, S_IRUGO, mmc_##name##_show, NULL)
-
-int mmc_add_attrs(struct mmc_card *card, struct device_attribute *attrs);
-void mmc_remove_attrs(struct mmc_card *card, struct device_attribute *attrs);
-
-#endif
diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c
index eeaaa9dce6e..ad1880c6751 100644
--- a/drivers/mtd/devices/block2mtd.c
+++ b/drivers/mtd/devices/block2mtd.c
@@ -408,7 +408,6 @@ static int block2mtd_setup2(const char *val)
if (token[1]) {
ret = parse_num(&erase_size, token[1]);
if (ret) {
- kfree(name);
parse_err("illegal erase size");
}
}
diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c
index f00e04efbe2..bc4649a17b9 100644
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -202,9 +202,8 @@ static int physmap_flash_suspend(struct platform_device *dev, pm_message_t state
int ret = 0;
int i;
- if (info)
- for (i = 0; i < MAX_RESOURCES; i++)
- ret |= info->mtd[i]->suspend(info->mtd[i]);
+ for (i = 0; i < MAX_RESOURCES && info->mtd[i]; i++)
+ ret |= info->mtd[i]->suspend(info->mtd[i]);
return ret;
}
@@ -214,9 +213,9 @@ static int physmap_flash_resume(struct platform_device *dev)
struct physmap_flash_info *info = platform_get_drvdata(dev);
int i;
- if (info)
- for (i = 0; i < MAX_RESOURCES; i++)
- info->mtd[i]->resume(info->mtd[i]);
+ for (i = 0; i < MAX_RESOURCES && info->mtd[i]; i++)
+ info->mtd[i]->resume(info->mtd[i]);
+
return 0;
}
@@ -225,8 +224,8 @@ static void physmap_flash_shutdown(struct platform_device *dev)
struct physmap_flash_info *info = platform_get_drvdata(dev);
int i;
- for (i = 0; i < MAX_RESOURCES; i++)
- if (info && info->mtd[i]->suspend(info->mtd[i]) == 0)
+ for (i = 0; i < MAX_RESOURCES && info->mtd[i]; i++)
+ if (info->mtd[i]->suspend(info->mtd[i]) == 0)
info->mtd[i]->resume(info->mtd[i]);
}
#else
diff --git a/drivers/mtd/nand/rtc_from4.c b/drivers/mtd/nand/rtc_from4.c
index 9189ec8f243..0f6ac250f43 100644
--- a/drivers/mtd/nand/rtc_from4.c
+++ b/drivers/mtd/nand/rtc_from4.c
@@ -460,7 +460,7 @@ static int rtc_from4_errstat(struct mtd_info *mtd, struct nand_chip *this,
er_stat |= 1 << 1;
kfree(buf);
}
-
+out:
rtn = status;
if (er_stat == 0) { /* if ECC is available */
rtn = (status & ~NAND_STATUS_FAIL); /* clear the error bit */
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index b09a53de1c5..d63cc93f055 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -968,7 +968,7 @@ dm9000_interrupt(int irq, void *dev_id)
struct dm9000_rxhdr {
u8 RxPktReady;
u8 RxStatus;
- u16 RxLen;
+ __le16 RxLen;
} __attribute__((__packed__));
/*
diff --git a/drivers/net/fec_mpc52xx_phy.c b/drivers/net/fec_mpc52xx_phy.c
index 1837584c450..6a3ac4ea97e 100644
--- a/drivers/net/fec_mpc52xx_phy.c
+++ b/drivers/net/fec_mpc52xx_phy.c
@@ -109,7 +109,8 @@ static int mpc52xx_fec_mdio_probe(struct of_device *of, const struct of_device_i
int irq = irq_of_parse_and_map(child, 0);
if (irq != NO_IRQ) {
const u32 *id = of_get_property(child, "reg", NULL);
- bus->irq[*id] = irq;
+ if (id)
+ bus->irq[*id] = irq;
}
}
diff --git a/drivers/net/plip.c b/drivers/net/plip.c
index fee3d7b1feb..1e965427b0e 100644
--- a/drivers/net/plip.c
+++ b/drivers/net/plip.c
@@ -903,17 +903,18 @@ plip_interrupt(void *dev_id)
struct net_local *nl;
struct plip_local *rcv;
unsigned char c0;
+ unsigned long flags;
nl = netdev_priv(dev);
rcv = &nl->rcv_data;
- spin_lock_irq (&nl->lock);
+ spin_lock_irqsave (&nl->lock, flags);
c0 = read_status(dev);
if ((c0 & 0xf8) != 0xc0) {
if ((dev->irq != -1) && (net_debug > 1))
printk(KERN_DEBUG "%s: spurious interrupt\n", dev->name);
- spin_unlock_irq (&nl->lock);
+ spin_unlock_irqrestore (&nl->lock, flags);
return;
}
@@ -942,7 +943,7 @@ plip_interrupt(void *dev_id)
break;
}
- spin_unlock_irq(&nl->lock);
+ spin_unlock_irqrestore(&nl->lock, flags);
}
static int
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 54c662690f6..853bce0ac47 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -4329,10 +4329,14 @@ static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
if (!hw)
return 0;
+ del_timer_sync(&hw->watchdog_timer);
+ cancel_work_sync(&hw->restart_work);
+
for (i = 0; i < hw->ports; i++) {
struct net_device *dev = hw->dev[i];
struct sky2_port *sky2 = netdev_priv(dev);
+ netif_device_detach(dev);
if (netif_running(dev))
sky2_down(dev);
@@ -4383,6 +4387,8 @@ static int sky2_resume(struct pci_dev *pdev)
for (i = 0; i < hw->ports; i++) {
struct net_device *dev = hw->dev[i];
+
+ netif_device_attach(dev);
if (netif_running(dev)) {
err = sky2_up(dev);
if (err) {
diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c
index 7e1f00131f9..df56a518691 100644
--- a/drivers/net/usb/rtl8150.c
+++ b/drivers/net/usb/rtl8150.c
@@ -376,7 +376,7 @@ static int alloc_all_urbs(rtl8150_t * dev)
return 0;
}
dev->ctrl_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!dev->intr_urb) {
+ if (!dev->ctrl_urb) {
usb_free_urb(dev->rx_urb);
usb_free_urb(dev->tx_urb);
usb_free_urb(dev->intr_urb);
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index 7f4836b8e71..5fa4ba0d993 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -467,7 +467,7 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_
t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset);
t_slot->hpc_ops->get_adapter_status(t_slot, &value); /* Check if slot is occupied */
- if (value) {
+ if (value && pciehp_force) {
rc = pciehp_enable_slot(t_slot);
if (rc) /* -ENODEV: shouldn't happen, but deal with it */
value = 0;
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index 977d29b3229..4cb949f0ebd 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -1097,6 +1097,8 @@ static void iommu_free_domain(struct dmar_domain *domain)
}
static struct iova_domain reserved_iova_list;
+static struct lock_class_key reserved_alloc_key;
+static struct lock_class_key reserved_rbtree_key;
static void dmar_init_reserved_ranges(void)
{
@@ -1107,6 +1109,11 @@ static void dmar_init_reserved_ranges(void)
init_iova_domain(&reserved_iova_list, DMA_32BIT_PFN);
+ lockdep_set_class(&reserved_iova_list.iova_alloc_lock,
+ &reserved_alloc_key);
+ lockdep_set_class(&reserved_iova_list.iova_rbtree_lock,
+ &reserved_rbtree_key);
+
/* IOAPIC ranges shouldn't be accessed by DMA */
iova = reserve_iova(&reserved_iova_list, IOVA_PFN(IOAPIC_RANGE_START),
IOVA_PFN(IOAPIC_RANGE_END));
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 183fddaa38b..a4445b7210b 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -314,24 +314,6 @@ int pci_find_ht_capability(struct pci_dev *dev, int ht_cap)
}
EXPORT_SYMBOL_GPL(pci_find_ht_capability);
-void pcie_wait_pending_transaction(struct pci_dev *dev)
-{
- int pos;
- u16 reg16;
-
- pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
- if (!pos)
- return;
- while (1) {
- pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &reg16);
- if (!(reg16 & PCI_EXP_DEVSTA_TRPND))
- break;
- cpu_relax();
- }
-
-}
-EXPORT_SYMBOL_GPL(pcie_wait_pending_transaction);
-
/**
* pci_find_parent_resource - return resource region of parent bus of given region
* @dev: PCI device structure contains resources to be searched
@@ -936,9 +918,6 @@ pci_disable_device(struct pci_dev *dev)
if (atomic_sub_return(1, &dev->enable_cnt) != 0)
return;
- /* Wait for all transactions are finished before disabling the device */
- pcie_wait_pending_transaction(dev);
-
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index e9a333d9855..e887aa45c9c 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -951,6 +951,12 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82375, quirk_e
* accesses to the SMBus registers, with potentially bad effects. Thus you
* should be very careful when adding new entries: if SMM is accessing the
* Intel SMBus, this is a very good reason to leave it hidden.
+ *
+ * Likewise, many recent laptops use ACPI for thermal management. If the
+ * ACPI DSDT code accesses the SMBus, then Linux should not access it
+ * natively, and keeping the SMBus hidden is the right thing to do. If you
+ * are about to add an entry in the table below, please first disassemble
+ * the DSDT and double-check that there is no code accessing the SMBus.
*/
static int asus_hides_smbus;
@@ -1028,11 +1034,6 @@ static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev)
case 0x12bf: /* HP xw4100 */
asus_hides_smbus = 1;
}
- else if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB)
- switch (dev->subsystem_device) {
- case 0x099c: /* HP Compaq nx6110 */
- asus_hides_smbus = 1;
- }
} else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)) {
if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
switch(dev->subsystem_device) {
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 125e7b7f34f..f7cb8e0758b 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -486,12 +486,7 @@ void __ref pci_bus_size_bridges(struct pci_bus *bus)
break;
case PCI_CLASS_BRIDGE_PCI:
- /* don't size subtractive decoding (transparent)
- * PCI-to-PCI bridges */
- if (bus->self->transparent)
- break;
pci_bridge_check_ranges(bus);
- /* fall through */
default:
pbus_size_io(bus);
/* If the bridge supports prefetchable range, size it
diff --git a/drivers/pnp/isapnp/core.c b/drivers/pnp/isapnp/core.c
index 2c925b7cd93..257f5d827d8 100644
--- a/drivers/pnp/isapnp/core.c
+++ b/drivers/pnp/isapnp/core.c
@@ -88,6 +88,15 @@ MODULE_LICENSE("GPL");
#define _LTAG_MEM32RANGE 0x85
#define _LTAG_FIXEDMEM32RANGE 0x86
+/*
+ * Sizes of ISAPNP logical device configuration register sets.
+ * See PNP-ISA-v1.0a.pdf, Appendix A.
+ */
+#define ISAPNP_MAX_MEM 4
+#define ISAPNP_MAX_PORT 8
+#define ISAPNP_MAX_IRQ 2
+#define ISAPNP_MAX_DMA 2
+
static unsigned char isapnp_checksum_value;
static DEFINE_MUTEX(isapnp_cfg_mutex);
static int isapnp_csn_count;
@@ -945,14 +954,14 @@ static int isapnp_read_resources(struct pnp_dev *dev,
dev->active = isapnp_read_byte(ISAPNP_CFG_ACTIVATE);
if (dev->active) {
- for (tmp = 0; tmp < PNP_MAX_PORT; tmp++) {
+ for (tmp = 0; tmp < ISAPNP_MAX_PORT; tmp++) {
ret = isapnp_read_word(ISAPNP_CFG_PORT + (tmp << 1));
if (!ret)
continue;
res->port_resource[tmp].start = ret;
res->port_resource[tmp].flags = IORESOURCE_IO;
}
- for (tmp = 0; tmp < PNP_MAX_MEM; tmp++) {
+ for (tmp = 0; tmp < ISAPNP_MAX_MEM; tmp++) {
ret =
isapnp_read_word(ISAPNP_CFG_MEM + (tmp << 3)) << 8;
if (!ret)
@@ -960,7 +969,7 @@ static int isapnp_read_resources(struct pnp_dev *dev,
res->mem_resource[tmp].start = ret;
res->mem_resource[tmp].flags = IORESOURCE_MEM;
}
- for (tmp = 0; tmp < PNP_MAX_IRQ; tmp++) {
+ for (tmp = 0; tmp < ISAPNP_MAX_IRQ; tmp++) {
ret =
(isapnp_read_word(ISAPNP_CFG_IRQ + (tmp << 1)) >>
8);
@@ -970,7 +979,7 @@ static int isapnp_read_resources(struct pnp_dev *dev,
res->irq_resource[tmp].end = ret;
res->irq_resource[tmp].flags = IORESOURCE_IRQ;
}
- for (tmp = 0; tmp < PNP_MAX_DMA; tmp++) {
+ for (tmp = 0; tmp < ISAPNP_MAX_DMA; tmp++) {
ret = isapnp_read_byte(ISAPNP_CFG_DMA + tmp);
if (ret == 4)
continue;
@@ -1002,14 +1011,14 @@ static int isapnp_set_resources(struct pnp_dev *dev,
isapnp_cfg_begin(dev->card->number, dev->number);
dev->active = 1;
for (tmp = 0;
- tmp < PNP_MAX_PORT
+ tmp < ISAPNP_MAX_PORT
&& (res->port_resource[tmp].
flags & (IORESOURCE_IO | IORESOURCE_UNSET)) == IORESOURCE_IO;
tmp++)
isapnp_write_word(ISAPNP_CFG_PORT + (tmp << 1),
res->port_resource[tmp].start);
for (tmp = 0;
- tmp < PNP_MAX_IRQ
+ tmp < ISAPNP_MAX_IRQ
&& (res->irq_resource[tmp].
flags & (IORESOURCE_IRQ | IORESOURCE_UNSET)) == IORESOURCE_IRQ;
tmp++) {
@@ -1019,14 +1028,14 @@ static int isapnp_set_resources(struct pnp_dev *dev,
isapnp_write_byte(ISAPNP_CFG_IRQ + (tmp << 1), irq);
}
for (tmp = 0;
- tmp < PNP_MAX_DMA
+ tmp < ISAPNP_MAX_DMA
&& (res->dma_resource[tmp].
flags & (IORESOURCE_DMA | IORESOURCE_UNSET)) == IORESOURCE_DMA;
tmp++)
isapnp_write_byte(ISAPNP_CFG_DMA + tmp,
res->dma_resource[tmp].start);
for (tmp = 0;
- tmp < PNP_MAX_MEM
+ tmp < ISAPNP_MAX_MEM
&& (res->mem_resource[tmp].
flags & (IORESOURCE_MEM | IORESOURCE_UNSET)) == IORESOURCE_MEM;
tmp++)
diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c
index 6aa231ef642..2dcd1960aca 100644
--- a/drivers/pnp/pnpacpi/rsparser.c
+++ b/drivers/pnp/pnpacpi/rsparser.c
@@ -85,7 +85,7 @@ static void pnpacpi_parse_allocated_irqresource(struct pnp_resource_table *res,
i < PNP_MAX_IRQ)
i++;
if (i >= PNP_MAX_IRQ && !warned) {
- printk(KERN_ERR "pnpacpi: exceeded the max number of IRQ "
+ printk(KERN_WARNING "pnpacpi: exceeded the max number of IRQ "
"resources: %d \n", PNP_MAX_IRQ);
warned = 1;
return;
@@ -187,7 +187,7 @@ static void pnpacpi_parse_allocated_dmaresource(struct pnp_resource_table *res,
res->dma_resource[i].start = dma;
res->dma_resource[i].end = dma;
} else if (!warned) {
- printk(KERN_ERR "pnpacpi: exceeded the max number of DMA "
+ printk(KERN_WARNING "pnpacpi: exceeded the max number of DMA "
"resources: %d \n", PNP_MAX_DMA);
warned = 1;
}
@@ -213,7 +213,7 @@ static void pnpacpi_parse_allocated_ioresource(struct pnp_resource_table *res,
res->port_resource[i].start = io;
res->port_resource[i].end = io + len - 1;
} else if (!warned) {
- printk(KERN_ERR "pnpacpi: exceeded the max number of IO "
+ printk(KERN_WARNING "pnpacpi: exceeded the max number of IO "
"resources: %d \n", PNP_MAX_PORT);
warned = 1;
}
@@ -241,7 +241,7 @@ static void pnpacpi_parse_allocated_memresource(struct pnp_resource_table *res,
res->mem_resource[i].start = mem;
res->mem_resource[i].end = mem + len - 1;
} else if (!warned) {
- printk(KERN_ERR "pnpacpi: exceeded the max number of mem "
+ printk(KERN_WARNING "pnpacpi: exceeded the max number of mem "
"resources: %d\n", PNP_MAX_MEM);
warned = 1;
}
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 82f5ad9c3af..9e7de63b26e 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -16,7 +16,7 @@ menuconfig RTC_CLASS
probably want to enable one or more of the interfaces below.
This driver can also be built as a module. If so, the module
- will be called rtc-class.
+ will be called rtc-core.
if RTC_CLASS
diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c
index bbf10ecf416..56728a2a338 100644
--- a/drivers/rtc/rtc-at91sam9.c
+++ b/drivers/rtc/rtc-at91sam9.c
@@ -274,7 +274,7 @@ static irqreturn_t at91_rtc_interrupt(int irq, void *_rtc)
* SR clears it, so we must only read it in this irq handler!
*/
mr = rtt_readl(rtc, MR) & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
- sr = rtt_readl(rtc, SR) & mr;
+ sr = rtt_readl(rtc, SR) & (mr >> 16);
if (!sr)
return IRQ_NONE;
@@ -321,6 +321,10 @@ static int __init at91_rtc_probe(struct platform_device *pdev)
if (!rtc)
return -ENOMEM;
+ /* platform setup code should have handled this; sigh */
+ if (!device_can_wakeup(&pdev->dev))
+ device_init_wakeup(&pdev->dev, 1);
+
platform_set_drvdata(pdev, rtc);
rtc->rtt = (void __force __iomem *) (AT91_VA_BASE_SYS - AT91_BASE_SYS);
rtc->rtt += r->start;
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index c46666a2480..b9d374082b6 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -325,7 +325,7 @@ menuconfig SCSI_LOWLEVEL
depends on SCSI!=n
default y
-if SCSI_LOWLEVEL
+if SCSI_LOWLEVEL && SCSI
config ISCSI_TCP
tristate "iSCSI Initiator over TCP/IP"
diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c
index f608d4a1d6d..792b2e807bf 100644
--- a/drivers/scsi/a100u2w.c
+++ b/drivers/scsi/a100u2w.c
@@ -674,12 +674,13 @@ static struct orc_scb *__orc_alloc_scb(struct orc_host * host)
for (index = 0; index < 32; index++) {
if ((host->allocation_map[channel][i] >> index) & 0x01) {
host->allocation_map[channel][i] &= ~(1 << index);
- break;
+ idx = index + 32 * i;
+ /*
+ * Translate the index to a structure instance
+ */
+ return host->scb_virt + idx;
}
}
- idx = index + 32 * i;
- /* Translate the index to a structure instance */
- return (struct orc_scb *) ((unsigned long) host->scb_virt + (idx * sizeof(struct orc_scb)));
}
return NULL;
}
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 3c2d6888bb8..8591585e5cc 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -6439,7 +6439,7 @@ static int AdvLoadMicrocode(AdvPortAddr iop_base, unsigned char *buf, int size,
i += 2;
len += 2;
} else {
- unsigned char off = buf[i] * 2;
+ unsigned int off = buf[i] * 2;
unsigned short word = (buf[off + 1] << 8) | buf[off];
AdvWriteWordAutoIncLram(iop_base, word);
len += 2;
diff --git a/drivers/scsi/arcmsr/arcmsr.h b/drivers/scsi/arcmsr/arcmsr.h
index 0393707bdfc..3288be2e49f 100644
--- a/drivers/scsi/arcmsr/arcmsr.h
+++ b/drivers/scsi/arcmsr/arcmsr.h
@@ -341,13 +341,13 @@ struct MessageUnit_B
uint32_t done_qbuffer[ARCMSR_MAX_HBB_POSTQUEUE];
uint32_t postq_index;
uint32_t doneq_index;
- uint32_t __iomem *drv2iop_doorbell_reg;
- uint32_t __iomem *drv2iop_doorbell_mask_reg;
- uint32_t __iomem *iop2drv_doorbell_reg;
- uint32_t __iomem *iop2drv_doorbell_mask_reg;
- uint32_t __iomem *msgcode_rwbuffer_reg;
- uint32_t __iomem *ioctl_wbuffer_reg;
- uint32_t __iomem *ioctl_rbuffer_reg;
+ void __iomem *drv2iop_doorbell_reg;
+ void __iomem *drv2iop_doorbell_mask_reg;
+ void __iomem *iop2drv_doorbell_reg;
+ void __iomem *iop2drv_doorbell_mask_reg;
+ void __iomem *msgcode_rwbuffer_reg;
+ void __iomem *ioctl_wbuffer_reg;
+ void __iomem *ioctl_rbuffer_reg;
};
/*
diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c
index 27ebd336409..0b2080d3357 100644
--- a/drivers/scsi/gdth.c
+++ b/drivers/scsi/gdth.c
@@ -493,6 +493,12 @@ int __gdth_execute(struct scsi_device *sdev, gdth_cmd_str *gdtcmd, char *cmnd,
if (!scp)
return -ENOMEM;
+ scp->sense_buffer = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL);
+ if (!scp->sense_buffer) {
+ kfree(scp);
+ return -ENOMEM;
+ }
+
scp->device = sdev;
memset(&cmndinfo, 0, sizeof(cmndinfo));
@@ -513,6 +519,7 @@ int __gdth_execute(struct scsi_device *sdev, gdth_cmd_str *gdtcmd, char *cmnd,
rval = cmndinfo.status;
if (info)
*info = cmndinfo.info;
+ kfree(scp->sense_buffer);
kfree(scp);
return rval;
}
diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c
index 880c78bff0e..ed7e0a1fc34 100644
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -218,18 +218,24 @@ int scsi_add_host(struct Scsi_Host *shost, struct device *dev)
get_device(&shost->shost_gendev);
- if (shost->transportt->host_size &&
- (shost->shost_data = kzalloc(shost->transportt->host_size,
- GFP_KERNEL)) == NULL)
- goto out_del_classdev;
+ if (shost->transportt->host_size) {
+ shost->shost_data = kzalloc(shost->transportt->host_size,
+ GFP_KERNEL);
+ if (shost->shost_data == NULL) {
+ error = -ENOMEM;
+ goto out_del_classdev;
+ }
+ }
if (shost->transportt->create_work_queue) {
snprintf(shost->work_q_name, KOBJ_NAME_LEN, "scsi_wq_%d",
shost->host_no);
shost->work_q = create_singlethread_workqueue(
shost->work_q_name);
- if (!shost->work_q)
+ if (!shost->work_q) {
+ error = -EINVAL;
goto out_free_shost_data;
+ }
}
error = scsi_sysfs_add_host(shost);
diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c
index 31b9af22424..709a6f75ca9 100644
--- a/drivers/scsi/libsas/sas_discover.c
+++ b/drivers/scsi/libsas/sas_discover.c
@@ -295,11 +295,14 @@ static void sas_discover_domain(struct work_struct *work)
case FANOUT_DEV:
error = sas_discover_root_expander(dev);
break;
-#ifdef CONFIG_SCSI_SAS_ATA
case SATA_DEV:
case SATA_PM:
+#ifdef CONFIG_SCSI_SAS_ATA
error = sas_discover_sata(dev);
break;
+#else
+ SAS_DPRINTK("ATA device seen but CONFIG_SCSI_SAS_ATA=N so cannot attach\n");
+ /* Fall through */
#endif
default:
error = -ENXIO;
diff --git a/drivers/scsi/mvsas.c b/drivers/scsi/mvsas.c
index 5ec0665b3a3..e55b9037adb 100644
--- a/drivers/scsi/mvsas.c
+++ b/drivers/scsi/mvsas.c
@@ -37,11 +37,13 @@
#include <linux/dma-mapping.h>
#include <linux/ctype.h>
#include <scsi/libsas.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/sas_ata.h>
#include <asm/io.h>
#define DRV_NAME "mvsas"
-#define DRV_VERSION "0.5.1"
-#define _MV_DUMP 0
+#define DRV_VERSION "0.5.2"
+#define _MV_DUMP 0
#define MVS_DISABLE_NVRAM
#define MVS_DISABLE_MSI
@@ -52,7 +54,7 @@
readl(regs + MVS_##reg); \
} while (0)
-#define MVS_ID_NOT_MAPPED 0xff
+#define MVS_ID_NOT_MAPPED 0x7f
#define MVS_CHIP_SLOT_SZ (1U << mvi->chip->slot_width)
/* offset for D2H FIS in the Received FIS List Structure */
@@ -84,6 +86,7 @@ enum driver_configuration {
MVS_RX_FIS_COUNT = 17, /* Optional rx'd FISs (max 17) */
MVS_QUEUE_SIZE = 30, /* Support Queue depth */
+ MVS_CAN_QUEUE = MVS_SLOTS - 1, /* SCSI Queue depth */
};
/* unchangeable hardware details */
@@ -358,7 +361,20 @@ enum hw_register_bits {
/* VSR */
/* PHYMODE 6 (CDB) */
- PHY_MODE6_DTL_SPEED = (1U << 27),
+ PHY_MODE6_LATECLK = (1U << 29), /* Lock Clock */
+ PHY_MODE6_DTL_SPEED = (1U << 27), /* Digital Loop Speed */
+ PHY_MODE6_FC_ORDER = (1U << 26), /* Fibre Channel Mode Order*/
+ PHY_MODE6_MUCNT_EN = (1U << 24), /* u Count Enable */
+ PHY_MODE6_SEL_MUCNT_LEN = (1U << 22), /* Training Length Select */
+ PHY_MODE6_SELMUPI = (1U << 20), /* Phase Multi Select (init) */
+ PHY_MODE6_SELMUPF = (1U << 18), /* Phase Multi Select (final) */
+ PHY_MODE6_SELMUFF = (1U << 16), /* Freq Loop Multi Sel(final) */
+ PHY_MODE6_SELMUFI = (1U << 14), /* Freq Loop Multi Sel(init) */
+ PHY_MODE6_FREEZE_LOOP = (1U << 12), /* Freeze Rx CDR Loop */
+ PHY_MODE6_INT_RXFOFFS = (1U << 3), /* Rx CDR Freq Loop Enable */
+ PHY_MODE6_FRC_RXFOFFS = (1U << 2), /* Initial Rx CDR Offset */
+ PHY_MODE6_STAU_0D8 = (1U << 1), /* Rx CDR Freq Loop Saturate */
+ PHY_MODE6_RXSAT_DIS = (1U << 0), /* Saturate Ctl */
};
enum mvs_info_flags {
@@ -511,7 +527,43 @@ enum status_buffer {
};
enum error_info_rec {
- CMD_ISS_STPD = (1U << 31), /* Cmd Issue Stopped */
+ CMD_ISS_STPD = (1U << 31), /* Cmd Issue Stopped */
+ CMD_PI_ERR = (1U << 30), /* Protection info error. see flags2 */
+ RSP_OVER = (1U << 29), /* rsp buffer overflow */
+ RETRY_LIM = (1U << 28), /* FIS/frame retry limit exceeded */
+ UNK_FIS = (1U << 27), /* unknown FIS */
+ DMA_TERM = (1U << 26), /* DMA terminate primitive rx'd */
+ SYNC_ERR = (1U << 25), /* SYNC rx'd during frame xmit */
+ TFILE_ERR = (1U << 24), /* SATA taskfile Error bit set */
+ R_ERR = (1U << 23), /* SATA returned R_ERR prim */
+ RD_OFS = (1U << 20), /* Read DATA frame invalid offset */
+ XFER_RDY_OFS = (1U << 19), /* XFER_RDY offset error */
+ UNEXP_XFER_RDY = (1U << 18), /* unexpected XFER_RDY error */
+ DATA_OVER_UNDER = (1U << 16), /* data overflow/underflow */
+ INTERLOCK = (1U << 15), /* interlock error */
+ NAK = (1U << 14), /* NAK rx'd */
+ ACK_NAK_TO = (1U << 13), /* ACK/NAK timeout */
+ CXN_CLOSED = (1U << 12), /* cxn closed w/out ack/nak */
+ OPEN_TO = (1U << 11), /* I_T nexus lost, open cxn timeout */
+ PATH_BLOCKED = (1U << 10), /* I_T nexus lost, pathway blocked */
+ NO_DEST = (1U << 9), /* I_T nexus lost, no destination */
+ STP_RES_BSY = (1U << 8), /* STP resources busy */
+ BREAK = (1U << 7), /* break received */
+ BAD_DEST = (1U << 6), /* bad destination */
+ BAD_PROTO = (1U << 5), /* protocol not supported */
+ BAD_RATE = (1U << 4), /* cxn rate not supported */
+ WRONG_DEST = (1U << 3), /* wrong destination error */
+ CREDIT_TO = (1U << 2), /* credit timeout */
+ WDOG_TO = (1U << 1), /* watchdog timeout */
+ BUF_PAR = (1U << 0), /* buffer parity error */
+};
+
+enum error_info_rec_2 {
+ SLOT_BSY_ERR = (1U << 31), /* Slot Busy Error */
+ GRD_CHK_ERR = (1U << 14), /* Guard Check Error */
+ APP_CHK_ERR = (1U << 13), /* Application Check error */
+ REF_CHK_ERR = (1U << 12), /* Reference Check Error */
+ USR_BLK_NM = (1U << 0), /* User Block Number */
};
struct mvs_chip_info {
@@ -543,28 +595,12 @@ struct mvs_cmd_hdr {
__le32 reserved[4];
};
-struct mvs_slot_info {
- struct sas_task *task;
- u32 n_elem;
- u32 tx;
-
- /* DMA buffer for storing cmd tbl, open addr frame, status buffer,
- * and PRD table
- */
- void *buf;
- dma_addr_t buf_dma;
-#if _MV_DUMP
- u32 cmd_size;
-#endif
-
- void *response;
-};
-
struct mvs_port {
struct asd_sas_port sas_port;
u8 port_attached;
u8 taskfileset;
u8 wide_port_phymap;
+ struct list_head list;
};
struct mvs_phy {
@@ -582,6 +618,27 @@ struct mvs_phy {
u32 frame_rcvd_size;
u8 frame_rcvd[32];
u8 phy_attached;
+ enum sas_linkrate minimum_linkrate;
+ enum sas_linkrate maximum_linkrate;
+};
+
+struct mvs_slot_info {
+ struct list_head list;
+ struct sas_task *task;
+ u32 n_elem;
+ u32 tx;
+
+ /* DMA buffer for storing cmd tbl, open addr frame, status buffer,
+ * and PRD table
+ */
+ void *buf;
+ dma_addr_t buf_dma;
+#if _MV_DUMP
+ u32 cmd_size;
+#endif
+
+ void *response;
+ struct mvs_port *port;
};
struct mvs_info {
@@ -612,21 +669,14 @@ struct mvs_info {
const struct mvs_chip_info *chip;
- unsigned long tags[MVS_SLOTS];
+ u8 tags[MVS_SLOTS];
struct mvs_slot_info slot_info[MVS_SLOTS];
/* further per-slot information */
struct mvs_phy phy[MVS_MAX_PHYS];
struct mvs_port port[MVS_MAX_PHYS];
-
- u32 can_queue; /* per adapter */
- u32 tag_out; /*Get*/
- u32 tag_in; /*Give*/
-};
-
-struct mvs_queue_task {
- struct list_head list;
-
- void *uldd_task;
+#ifdef MVS_USE_TASKLET
+ struct tasklet_struct tasklet;
+#endif
};
static int mvs_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
@@ -641,10 +691,11 @@ static u32 mvs_read_port_irq_mask(struct mvs_info *mvi, u32 port);
static u32 mvs_is_phy_ready(struct mvs_info *mvi, int i);
static void mvs_detect_porttype(struct mvs_info *mvi, int i);
static void mvs_update_phyinfo(struct mvs_info *mvi, int i, int get_st);
+static void mvs_release_task(struct mvs_info *mvi, int phy_no);
static int mvs_scan_finished(struct Scsi_Host *, unsigned long);
static void mvs_scan_start(struct Scsi_Host *);
-static int mvs_sas_slave_alloc(struct scsi_device *scsi_dev);
+static int mvs_slave_configure(struct scsi_device *sdev);
static struct scsi_transport_template *mvs_stt;
@@ -659,7 +710,7 @@ static struct scsi_host_template mvs_sht = {
.name = DRV_NAME,
.queuecommand = sas_queuecommand,
.target_alloc = sas_target_alloc,
- .slave_configure = sas_slave_configure,
+ .slave_configure = mvs_slave_configure,
.slave_destroy = sas_slave_destroy,
.scan_finished = mvs_scan_finished,
.scan_start = mvs_scan_start,
@@ -674,7 +725,7 @@ static struct scsi_host_template mvs_sht = {
.use_clustering = ENABLE_CLUSTERING,
.eh_device_reset_handler = sas_eh_device_reset_handler,
.eh_bus_reset_handler = sas_eh_bus_reset_handler,
- .slave_alloc = mvs_sas_slave_alloc,
+ .slave_alloc = sas_slave_alloc,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
};
@@ -709,10 +760,10 @@ static void mvs_hexdump(u32 size, u8 *data, u32 baseaddr)
printk("\n");
}
+#if _MV_DUMP
static void mvs_hba_sb_dump(struct mvs_info *mvi, u32 tag,
enum sas_protocol proto)
{
-#if _MV_DUMP
u32 offset;
struct pci_dev *pdev = mvi->pdev;
struct mvs_slot_info *slot = &mvi->slot_info[tag];
@@ -723,14 +774,14 @@ static void mvs_hba_sb_dump(struct mvs_info *mvi, u32 tag,
tag);
mvs_hexdump(32, (u8 *) slot->response,
(u32) slot->buf_dma + offset);
-#endif
}
+#endif
static void mvs_hba_memory_dump(struct mvs_info *mvi, u32 tag,
enum sas_protocol proto)
{
#if _MV_DUMP
- u32 sz, w_ptr, r_ptr;
+ u32 sz, w_ptr;
u64 addr;
void __iomem *regs = mvi->regs;
struct pci_dev *pdev = mvi->pdev;
@@ -738,12 +789,10 @@ static void mvs_hba_memory_dump(struct mvs_info *mvi, u32 tag,
/*Delivery Queue */
sz = mr32(TX_CFG) & TX_RING_SZ_MASK;
- w_ptr = mr32(TX_PROD_IDX) & TX_RING_SZ_MASK;
- r_ptr = mr32(TX_CONS_IDX) & TX_RING_SZ_MASK;
+ w_ptr = slot->tx;
addr = mr32(TX_HI) << 16 << 16 | mr32(TX_LO);
dev_printk(KERN_DEBUG, &pdev->dev,
- "Delivery Queue Size=%04d , WRT_PTR=%04X , RD_PTR=%04X\n",
- sz, w_ptr, r_ptr);
+ "Delivery Queue Size=%04d , WRT_PTR=%04X\n", sz, w_ptr);
dev_printk(KERN_DEBUG, &pdev->dev,
"Delivery Queue Base Address=0x%llX (PA)"
"(tx_dma=0x%llX), Entry=%04d\n",
@@ -751,11 +800,11 @@ static void mvs_hba_memory_dump(struct mvs_info *mvi, u32 tag,
mvs_hexdump(sizeof(u32), (u8 *)(&mvi->tx[mvi->tx_prod]),
(u32) mvi->tx_dma + sizeof(u32) * w_ptr);
/*Command List */
- addr = mr32(CMD_LIST_HI) << 16 << 16 | mr32(CMD_LIST_LO);
+ addr = mvi->slot_dma;
dev_printk(KERN_DEBUG, &pdev->dev,
"Command List Base Address=0x%llX (PA)"
"(slot_dma=0x%llX), Header=%03d\n",
- addr, mvi->slot_dma, tag);
+ addr, slot->buf_dma, tag);
dev_printk(KERN_DEBUG, &pdev->dev, "Command Header[%03d]:\n", tag);
/*mvs_cmd_hdr */
mvs_hexdump(sizeof(struct mvs_cmd_hdr), (u8 *)(&mvi->slot[tag]),
@@ -779,7 +828,7 @@ static void mvs_hba_memory_dump(struct mvs_info *mvi, u32 tag,
static void mvs_hba_cq_dump(struct mvs_info *mvi)
{
-#if _MV_DUMP
+#if (_MV_DUMP > 2)
u64 addr;
void __iomem *regs = mvi->regs;
struct pci_dev *pdev = mvi->pdev;
@@ -788,8 +837,8 @@ static void mvs_hba_cq_dump(struct mvs_info *mvi)
/*Completion Queue */
addr = mr32(RX_HI) << 16 << 16 | mr32(RX_LO);
- dev_printk(KERN_DEBUG, &pdev->dev, "Completion Task = 0x%08X\n",
- (u32) mvi->slot_info[rx_desc & RXQ_SLOT_MASK].task);
+ dev_printk(KERN_DEBUG, &pdev->dev, "Completion Task = 0x%p\n",
+ mvi->slot_info[rx_desc & RXQ_SLOT_MASK].task);
dev_printk(KERN_DEBUG, &pdev->dev,
"Completion List Base Address=0x%llX (PA), "
"CQ_Entry=%04d, CQ_WP=0x%08X\n",
@@ -854,34 +903,53 @@ static int pci_go_64(struct pci_dev *pdev)
return rc;
}
+static int mvs_find_tag(struct mvs_info *mvi, struct sas_task *task, u32 *tag)
+{
+ if (task->lldd_task) {
+ struct mvs_slot_info *slot;
+ slot = (struct mvs_slot_info *) task->lldd_task;
+ *tag = slot - mvi->slot_info;
+ return 1;
+ }
+ return 0;
+}
+
static void mvs_tag_clear(struct mvs_info *mvi, u32 tag)
{
- mvi->tag_in = (mvi->tag_in + 1) & (MVS_SLOTS - 1);
- mvi->tags[mvi->tag_in] = tag;
+ void *bitmap = (void *) &mvi->tags;
+ clear_bit(tag, bitmap);
}
static void mvs_tag_free(struct mvs_info *mvi, u32 tag)
{
- mvi->tag_out = (mvi->tag_out - 1) & (MVS_SLOTS - 1);
+ mvs_tag_clear(mvi, tag);
+}
+
+static void mvs_tag_set(struct mvs_info *mvi, unsigned int tag)
+{
+ void *bitmap = (void *) &mvi->tags;
+ set_bit(tag, bitmap);
}
static int mvs_tag_alloc(struct mvs_info *mvi, u32 *tag_out)
{
- if (mvi->tag_out != mvi->tag_in) {
- *tag_out = mvi->tags[mvi->tag_out];
- mvi->tag_out = (mvi->tag_out + 1) & (MVS_SLOTS - 1);
- return 0;
- }
- return -EBUSY;
+ unsigned int index, tag;
+ void *bitmap = (void *) &mvi->tags;
+
+ index = find_first_zero_bit(bitmap, MVS_SLOTS);
+ tag = index;
+ if (tag >= MVS_SLOTS)
+ return -SAS_QUEUE_FULL;
+ mvs_tag_set(mvi, tag);
+ *tag_out = tag;
+ return 0;
}
static void mvs_tag_init(struct mvs_info *mvi)
{
int i;
for (i = 0; i < MVS_SLOTS; ++i)
- mvi->tags[i] = i;
- mvi->tag_out = 0;
- mvi->tag_in = MVS_SLOTS - 1;
+ mvs_tag_clear(mvi, i);
}
#ifndef MVS_DISABLE_NVRAM
@@ -1013,10 +1081,21 @@ err_out:
static void mvs_bytes_dmaed(struct mvs_info *mvi, int i)
{
struct mvs_phy *phy = &mvi->phy[i];
+ struct asd_sas_phy *sas_phy = mvi->sas.sas_phy[i];
if (!phy->phy_attached)
return;
+ if (sas_phy->phy) {
+ struct sas_phy *sphy = sas_phy->phy;
+
+ sphy->negotiated_linkrate = sas_phy->linkrate;
+ sphy->minimum_linkrate = phy->minimum_linkrate;
+ sphy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
+ sphy->maximum_linkrate = phy->maximum_linkrate;
+ sphy->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS;
+ }
+
if (phy->phy_type & PORT_TYPE_SAS) {
struct sas_identify_frame *id;
@@ -1053,80 +1132,149 @@ static void mvs_scan_start(struct Scsi_Host *shost)
}
}
-static int mvs_sas_slave_alloc(struct scsi_device *scsi_dev)
+static int mvs_slave_configure(struct scsi_device *sdev)
{
- int rc;
+ struct domain_device *dev = sdev_to_domain_dev(sdev);
+ int ret = sas_slave_configure(sdev);
- rc = sas_slave_alloc(scsi_dev);
+ if (ret)
+ return ret;
- return rc;
+ if (dev_is_sata(dev)) {
+ /* struct ata_port *ap = dev->sata_dev.ap; */
+ /* struct ata_device *adev = ap->link.device; */
+
+ /* clamp at no NCQ for the time being */
+ /* adev->flags |= ATA_DFLAG_NCQ_OFF; */
+ scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, 1);
+ }
+ return 0;
}
-static void mvs_int_port(struct mvs_info *mvi, int port_no, u32 events)
+static void mvs_int_port(struct mvs_info *mvi, int phy_no, u32 events)
{
struct pci_dev *pdev = mvi->pdev;
struct sas_ha_struct *sas_ha = &mvi->sas;
- struct mvs_phy *phy = &mvi->phy[port_no];
+ struct mvs_phy *phy = &mvi->phy[phy_no];
struct asd_sas_phy *sas_phy = &phy->sas_phy;
- phy->irq_status = mvs_read_port_irq_stat(mvi, port_no);
+ phy->irq_status = mvs_read_port_irq_stat(mvi, phy_no);
/*
* events is port event now ,
* we need check the interrupt status which belongs to per port.
*/
dev_printk(KERN_DEBUG, &pdev->dev,
"Port %d Event = %X\n",
- port_no, phy->irq_status);
+ phy_no, phy->irq_status);
if (phy->irq_status & (PHYEV_POOF | PHYEV_DEC_ERR)) {
- if (!mvs_is_phy_ready(mvi, port_no)) {
+ mvs_release_task(mvi, phy_no);
+ if (!mvs_is_phy_ready(mvi, phy_no)) {
sas_phy_disconnected(sas_phy);
sas_ha->notify_phy_event(sas_phy, PHYE_LOSS_OF_SIGNAL);
+ dev_printk(KERN_INFO, &pdev->dev,
+ "Port %d Unplug Notice\n", phy_no);
+
} else
mvs_phy_control(sas_phy, PHY_FUNC_LINK_RESET, NULL);
}
if (!(phy->irq_status & PHYEV_DEC_ERR)) {
if (phy->irq_status & PHYEV_COMWAKE) {
- u32 tmp = mvs_read_port_irq_mask(mvi, port_no);
- mvs_write_port_irq_mask(mvi, port_no,
+ u32 tmp = mvs_read_port_irq_mask(mvi, phy_no);
+ mvs_write_port_irq_mask(mvi, phy_no,
tmp | PHYEV_SIG_FIS);
}
if (phy->irq_status & (PHYEV_SIG_FIS | PHYEV_ID_DONE)) {
- phy->phy_status = mvs_is_phy_ready(mvi, port_no);
+ phy->phy_status = mvs_is_phy_ready(mvi, phy_no);
if (phy->phy_status) {
- mvs_detect_porttype(mvi, port_no);
+ mvs_detect_porttype(mvi, phy_no);
if (phy->phy_type & PORT_TYPE_SATA) {
u32 tmp = mvs_read_port_irq_mask(mvi,
- port_no);
+ phy_no);
tmp &= ~PHYEV_SIG_FIS;
mvs_write_port_irq_mask(mvi,
- port_no, tmp);
+ phy_no, tmp);
}
- mvs_update_phyinfo(mvi, port_no, 0);
+ mvs_update_phyinfo(mvi, phy_no, 0);
sas_ha->notify_phy_event(sas_phy,
PHYE_OOB_DONE);
- mvs_bytes_dmaed(mvi, port_no);
+ mvs_bytes_dmaed(mvi, phy_no);
} else {
dev_printk(KERN_DEBUG, &pdev->dev,
"plugin interrupt but phy is gone\n");
mvs_phy_control(sas_phy, PHY_FUNC_LINK_RESET,
NULL);
}
- } else if (phy->irq_status & PHYEV_BROAD_CH)
+ } else if (phy->irq_status & PHYEV_BROAD_CH) {
+ mvs_release_task(mvi, phy_no);
sas_ha->notify_port_event(sas_phy,
PORTE_BROADCAST_RCVD);
+ }
}
- mvs_write_port_irq_stat(mvi, port_no, phy->irq_status);
+ mvs_write_port_irq_stat(mvi, phy_no, phy->irq_status);
}
static void mvs_int_sata(struct mvs_info *mvi)
{
- /* FIXME */
+ u32 tmp;
+ void __iomem *regs = mvi->regs;
+ tmp = mr32(INT_STAT_SRS);
+ mw32(INT_STAT_SRS, tmp & 0xFFFF);
+}
+
+static void mvs_slot_reset(struct mvs_info *mvi, struct sas_task *task,
+ u32 slot_idx)
+{
+ void __iomem *regs = mvi->regs;
+ struct domain_device *dev = task->dev;
+ struct asd_sas_port *sas_port = dev->port;
+ struct mvs_port *port = mvi->slot_info[slot_idx].port;
+ u32 reg_set, phy_mask;
+
+ if (!sas_protocol_ata(task->task_proto)) {
+ reg_set = 0;
+ phy_mask = (port->wide_port_phymap) ? port->wide_port_phymap :
+ sas_port->phy_mask;
+ } else {
+ reg_set = port->taskfileset;
+ phy_mask = sas_port->phy_mask;
+ }
+ mvi->tx[mvi->tx_prod] = cpu_to_le32(TXQ_MODE_I | slot_idx |
+ (TXQ_CMD_SLOT_RESET << TXQ_CMD_SHIFT) |
+ (phy_mask << TXQ_PHY_SHIFT) |
+ (reg_set << TXQ_SRS_SHIFT));
+
+ mw32(TX_PROD_IDX, mvi->tx_prod);
+ mvi->tx_prod = (mvi->tx_prod + 1) & (MVS_CHIP_SLOT_SZ - 1);
+}
+
+static int mvs_sata_done(struct mvs_info *mvi, struct sas_task *task,
+ u32 slot_idx, int err)
+{
+ struct mvs_port *port = mvi->slot_info[slot_idx].port;
+ struct task_status_struct *tstat = &task->task_status;
+ struct ata_task_resp *resp = (struct ata_task_resp *)tstat->buf;
+ int stat = SAM_GOOD;
+
+ resp->frame_len = sizeof(struct dev_to_host_fis);
+ memcpy(&resp->ending_fis[0],
+ SATA_RECEIVED_D2H_FIS(port->taskfileset),
+ sizeof(struct dev_to_host_fis));
+ tstat->buf_valid_size = sizeof(*resp);
+ if (unlikely(err))
+ stat = SAS_PROTO_RESPONSE;
+ return stat;
}
-static void mvs_slot_free(struct mvs_info *mvi, struct sas_task *task,
+static void mvs_slot_free(struct mvs_info *mvi, u32 rx_desc)
+{
+ u32 slot_idx = rx_desc & RXQ_SLOT_MASK;
+ mvs_tag_clear(mvi, slot_idx);
+}
+
+static void mvs_slot_task_free(struct mvs_info *mvi, struct sas_task *task,
struct mvs_slot_info *slot, u32 slot_idx)
{
if (!sas_protocol_ata(task->task_proto))
@@ -1149,38 +1297,58 @@ static void mvs_slot_free(struct mvs_info *mvi, struct sas_task *task,
/* do nothing */
break;
}
-
+ list_del(&slot->list);
+ task->lldd_task = NULL;
slot->task = NULL;
- mvs_tag_clear(mvi, slot_idx);
+ slot->port = NULL;
}
-static void mvs_slot_err(struct mvs_info *mvi, struct sas_task *task,
+static int mvs_slot_err(struct mvs_info *mvi, struct sas_task *task,
u32 slot_idx)
{
struct mvs_slot_info *slot = &mvi->slot_info[slot_idx];
- u64 err_dw0 = *(u32 *) slot->response;
- void __iomem *regs = mvi->regs;
- u32 tmp;
+ u32 err_dw0 = le32_to_cpu(*(u32 *) (slot->response));
+ u32 err_dw1 = le32_to_cpu(*(u32 *) (slot->response + 4));
+ int stat = SAM_CHECK_COND;
- if (err_dw0 & CMD_ISS_STPD)
- if (sas_protocol_ata(task->task_proto)) {
- tmp = mr32(INT_STAT_SRS);
- mw32(INT_STAT_SRS, tmp & 0xFFFF);
- }
+ if (err_dw1 & SLOT_BSY_ERR) {
+ stat = SAS_QUEUE_FULL;
+ mvs_slot_reset(mvi, task, slot_idx);
+ }
+ switch (task->task_proto) {
+ case SAS_PROTOCOL_SSP:
+ break;
+ case SAS_PROTOCOL_SMP:
+ break;
+ case SAS_PROTOCOL_SATA:
+ case SAS_PROTOCOL_STP:
+ case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
+ if (err_dw0 & TFILE_ERR)
+ stat = mvs_sata_done(mvi, task, slot_idx, 1);
+ break;
+ default:
+ break;
+ }
- mvs_hba_sb_dump(mvi, slot_idx, task->task_proto);
+ mvs_hexdump(16, (u8 *) slot->response, 0);
+ return stat;
}
-static int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc)
+static int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc, u32 flags)
{
u32 slot_idx = rx_desc & RXQ_SLOT_MASK;
struct mvs_slot_info *slot = &mvi->slot_info[slot_idx];
struct sas_task *task = slot->task;
- struct task_status_struct *tstat = &task->task_status;
- struct mvs_port *port = &mvi->port[task->dev->port->id];
+ struct task_status_struct *tstat;
+ struct mvs_port *port;
bool aborted;
void *to;
+ if (unlikely(!task || !task->lldd_task))
+ return -1;
+
+ mvs_hba_cq_dump(mvi);
+
spin_lock(&task->task_state_lock);
aborted = task->task_state_flags & SAS_TASK_STATE_ABORTED;
if (!aborted) {
@@ -1190,22 +1358,27 @@ static int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc)
}
spin_unlock(&task->task_state_lock);
- if (aborted)
+ if (aborted) {
+ mvs_slot_task_free(mvi, task, slot, slot_idx);
+ mvs_slot_free(mvi, rx_desc);
return -1;
+ }
+ port = slot->port;
+ tstat = &task->task_status;
memset(tstat, 0, sizeof(*tstat));
tstat->resp = SAS_TASK_COMPLETE;
-
- if (unlikely(!port->port_attached)) {
- tstat->stat = SAS_PHY_DOWN;
+ if (unlikely(!port->port_attached || flags)) {
+ mvs_slot_err(mvi, task, slot_idx);
+ if (!sas_protocol_ata(task->task_proto))
+ tstat->stat = SAS_PHY_DOWN;
goto out;
}
/* error info record present */
- if ((rx_desc & RXQ_ERR) && (*(u64 *) slot->response)) {
- tstat->stat = SAM_CHECK_COND;
- mvs_slot_err(mvi, task, slot_idx);
+ if (unlikely((rx_desc & RXQ_ERR) && (*(u64 *) slot->response))) {
+ tstat->stat = mvs_slot_err(mvi, task, slot_idx);
goto out;
}
@@ -1242,21 +1415,7 @@ static int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc)
case SAS_PROTOCOL_SATA:
case SAS_PROTOCOL_STP:
case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP: {
- struct ata_task_resp *resp =
- (struct ata_task_resp *)tstat->buf;
-
- if ((rx_desc & (RXQ_DONE | RXQ_ERR | RXQ_ATTN)) ==
- RXQ_DONE)
- tstat->stat = SAM_GOOD;
- else
- tstat->stat = SAM_CHECK_COND;
-
- resp->frame_len = sizeof(struct dev_to_host_fis);
- memcpy(&resp->ending_fis[0],
- SATA_RECEIVED_D2H_FIS(port->taskfileset),
- sizeof(struct dev_to_host_fis));
- if (resp->ending_fis[2] & ATA_ERR)
- mvs_hexdump(16, resp->ending_fis, 0);
+ tstat->stat = mvs_sata_done(mvi, task, slot_idx, 0);
break;
}
@@ -1266,11 +1425,34 @@ static int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc)
}
out:
- mvs_slot_free(mvi, task, slot, slot_idx);
+ mvs_slot_task_free(mvi, task, slot, slot_idx);
+ if (unlikely(tstat->stat != SAS_QUEUE_FULL))
+ mvs_slot_free(mvi, rx_desc);
+
+ spin_unlock(&mvi->lock);
task->task_done(task);
+ spin_lock(&mvi->lock);
return tstat->stat;
}
+static void mvs_release_task(struct mvs_info *mvi, int phy_no)
+{
+ struct list_head *pos, *n;
+ struct mvs_slot_info *slot;
+ struct mvs_phy *phy = &mvi->phy[phy_no];
+ struct mvs_port *port = phy->port;
+ u32 rx_desc;
+
+ if (!port)
+ return;
+
+ list_for_each_safe(pos, n, &port->list) {
+ slot = container_of(pos, struct mvs_slot_info, list);
+ rx_desc = (u32) (slot - mvi->slot_info);
+ mvs_slot_complete(mvi, rx_desc, 1);
+ }
+}
+
static void mvs_int_full(struct mvs_info *mvi)
{
void __iomem *regs = mvi->regs;
@@ -1305,40 +1487,43 @@ static int mvs_int_rx(struct mvs_info *mvi, bool self_clear)
* we don't have to stall the CPU reading that register.
* The actual RX ring is offset by one dword, due to this.
*/
- rx_prod_idx = mr32(RX_CONS_IDX) & RX_RING_SZ_MASK;
- if (rx_prod_idx == 0xfff) { /* h/w hasn't touched RX ring yet */
- mvi->rx_cons = 0xfff;
+ rx_prod_idx = mvi->rx_cons;
+ mvi->rx_cons = le32_to_cpu(mvi->rx[0]);
+ if (mvi->rx_cons == 0xfff) /* h/w hasn't touched RX ring yet */
return 0;
- }
/* The CMPL_Q may come late, read from register and try again
* note: if coalescing is enabled,
* it will need to read from register every time for sure
*/
if (mvi->rx_cons == rx_prod_idx)
- return 0;
+ mvi->rx_cons = mr32(RX_CONS_IDX) & RX_RING_SZ_MASK;
- if (mvi->rx_cons == 0xfff)
- mvi->rx_cons = MVS_RX_RING_SZ - 1;
+ if (mvi->rx_cons == rx_prod_idx)
+ return 0;
while (mvi->rx_cons != rx_prod_idx) {
/* increment our internal RX consumer pointer */
- mvi->rx_cons = (mvi->rx_cons + 1) & (MVS_RX_RING_SZ - 1);
+ rx_prod_idx = (rx_prod_idx + 1) & (MVS_RX_RING_SZ - 1);
- rx_desc = le32_to_cpu(mvi->rx[mvi->rx_cons + 1]);
-
- mvs_hba_cq_dump(mvi);
+ rx_desc = le32_to_cpu(mvi->rx[rx_prod_idx + 1]);
if (likely(rx_desc & RXQ_DONE))
- mvs_slot_complete(mvi, rx_desc);
+ mvs_slot_complete(mvi, rx_desc, 0);
if (rx_desc & RXQ_ATTN) {
attn = true;
dev_printk(KERN_DEBUG, &pdev->dev, "ATTN %X\n",
rx_desc);
} else if (rx_desc & RXQ_ERR) {
+ if (!(rx_desc & RXQ_DONE))
+ mvs_slot_complete(mvi, rx_desc, 0);
dev_printk(KERN_DEBUG, &pdev->dev, "RXQ_ERR %X\n",
rx_desc);
+ } else if (rx_desc & RXQ_SLOT_RESET) {
+ dev_printk(KERN_DEBUG, &pdev->dev, "Slot reset[%X]\n",
+ rx_desc);
+ mvs_slot_free(mvi, rx_desc);
}
}
@@ -1348,6 +1533,23 @@ static int mvs_int_rx(struct mvs_info *mvi, bool self_clear)
return 0;
}
+#ifdef MVS_USE_TASKLET
+static void mvs_tasklet(unsigned long data)
+{
+ struct mvs_info *mvi = (struct mvs_info *) data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&mvi->lock, flags);
+
+#ifdef MVS_DISABLE_MSI
+ mvs_int_full(mvi);
+#else
+ mvs_int_rx(mvi, true);
+#endif
+ spin_unlock_irqrestore(&mvi->lock, flags);
+}
+#endif
+
static irqreturn_t mvs_interrupt(int irq, void *opaque)
{
struct mvs_info *mvi = opaque;
@@ -1356,18 +1558,21 @@ static irqreturn_t mvs_interrupt(int irq, void *opaque)
stat = mr32(GBL_INT_STAT);
- /* clear CMD_CMPLT ASAP */
- mw32_f(INT_STAT, CINT_DONE);
-
if (stat == 0 || stat == 0xffffffff)
return IRQ_NONE;
+ /* clear CMD_CMPLT ASAP */
+ mw32_f(INT_STAT, CINT_DONE);
+
+#ifndef MVS_USE_TASKLET
spin_lock(&mvi->lock);
mvs_int_full(mvi);
spin_unlock(&mvi->lock);
-
+#else
+ tasklet_schedule(&mvi->tasklet);
+#endif
return IRQ_HANDLED;
}
@@ -1376,12 +1581,15 @@ static irqreturn_t mvs_msi_interrupt(int irq, void *opaque)
{
struct mvs_info *mvi = opaque;
+#ifndef MVS_USE_TASKLET
spin_lock(&mvi->lock);
mvs_int_rx(mvi, true);
spin_unlock(&mvi->lock);
-
+#else
+ tasklet_schedule(&mvi->tasklet);
+#endif
return IRQ_HANDLED;
}
#endif
@@ -1576,15 +1784,19 @@ static u8 mvs_assign_reg_set(struct mvs_info *mvi, struct mvs_port *port)
return MVS_ID_NOT_MAPPED;
}
-static u32 mvs_get_ncq_tag(struct sas_task *task)
+static u32 mvs_get_ncq_tag(struct sas_task *task, u32 *tag)
{
- u32 tag = 0;
struct ata_queued_cmd *qc = task->uldd_task;
- if (qc)
- tag = qc->tag;
+ if (qc) {
+ if (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
+ qc->tf.command == ATA_CMD_FPDMA_READ) {
+ *tag = qc->tag;
+ return 1;
+ }
+ }
- return tag;
+ return 0;
}
static int mvs_task_prep_ata(struct mvs_info *mvi,
@@ -1628,11 +1840,9 @@ static int mvs_task_prep_ata(struct mvs_info *mvi,
hdr->flags = cpu_to_le32(flags);
/* FIXME: the low order order 5 bits for the TAG if enable NCQ */
- if (task->ata_task.use_ncq) {
- hdr->tags = cpu_to_le32(mvs_get_ncq_tag(task));
- /*Fill in task file */
- task->ata_task.fis.sector_count = hdr->tags << 3;
- } else
+ if (task->ata_task.use_ncq && mvs_get_ncq_tag(task, &hdr->tags))
+ task->ata_task.fis.sector_count |= hdr->tags << 3;
+ else
hdr->tags = cpu_to_le32(tag);
hdr->data_len = cpu_to_le32(task->total_xfer_len);
@@ -1725,13 +1935,16 @@ static int mvs_task_prep_ssp(struct mvs_info *mvi,
u32 flags;
u32 resp_len, req_len, i, tag = tei->tag;
const u32 max_resp_len = SB_RFB_MAX;
+ u8 phy_mask;
slot = &mvi->slot_info[tag];
+ phy_mask = (port->wide_port_phymap) ? port->wide_port_phymap :
+ task->dev->port->phy_mask;
slot->tx = mvi->tx_prod;
mvi->tx[mvi->tx_prod] = cpu_to_le32(TXQ_MODE_I | tag |
(TXQ_CMD_SSP << TXQ_CMD_SHIFT) |
- (port->wide_port_phymap << TXQ_PHY_SHIFT));
+ (phy_mask << TXQ_PHY_SHIFT));
flags = MCH_RETRY;
if (task->ssp_task.enable_first_burst) {
@@ -1832,22 +2045,32 @@ static int mvs_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags)
void __iomem *regs = mvi->regs;
struct mvs_task_exec_info tei;
struct sas_task *t = task;
+ struct mvs_slot_info *slot;
u32 tag = 0xdeadbeef, rc, n_elem = 0;
unsigned long flags;
u32 n = num, pass = 0;
spin_lock_irqsave(&mvi->lock, flags);
-
do {
+ dev = t->dev;
tei.port = &mvi->port[dev->port->id];
if (!tei.port->port_attached) {
- struct task_status_struct *ts = &t->task_status;
- ts->stat = SAS_PHY_DOWN;
- t->task_done(t);
- rc = 0;
- goto exec_exit;
+ if (sas_protocol_ata(t->task_proto)) {
+ rc = SAS_PHY_DOWN;
+ goto out_done;
+ } else {
+ struct task_status_struct *ts = &t->task_status;
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_PHY_DOWN;
+ t->task_done(t);
+ if (n > 1)
+ t = list_entry(t->list.next,
+ struct sas_task, list);
+ continue;
+ }
}
+
if (!sas_protocol_ata(t->task_proto)) {
if (t->num_scatter) {
n_elem = pci_map_sg(mvi->pdev, t->scatter,
@@ -1866,9 +2089,10 @@ static int mvs_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags)
if (rc)
goto err_out;
- mvi->slot_info[tag].task = t;
- mvi->slot_info[tag].n_elem = n_elem;
- memset(mvi->slot_info[tag].buf, 0, MVS_SLOT_BUF_SZ);
+ slot = &mvi->slot_info[tag];
+ t->lldd_task = NULL;
+ slot->n_elem = n_elem;
+ memset(slot->buf, 0, MVS_SLOT_BUF_SZ);
tei.task = t;
tei.hdr = &mvi->slot[tag];
tei.tag = tag;
@@ -1897,28 +2121,26 @@ static int mvs_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags)
if (rc)
goto err_out_tag;
+ slot->task = t;
+ slot->port = tei.port;
+ t->lldd_task = (void *) slot;
+ list_add_tail(&slot->list, &slot->port->list);
/* TODO: select normal or high priority */
spin_lock(&t->task_state_lock);
t->task_state_flags |= SAS_TASK_AT_INITIATOR;
spin_unlock(&t->task_state_lock);
- if (n == 1) {
- spin_unlock_irqrestore(&mvi->lock, flags);
- mw32(TX_PROD_IDX, mvi->tx_prod);
- }
mvs_hba_memory_dump(mvi, tag, t->task_proto);
++pass;
mvi->tx_prod = (mvi->tx_prod + 1) & (MVS_CHIP_SLOT_SZ - 1);
-
- if (n == 1)
- break;
-
- t = list_entry(t->list.next, struct sas_task, list);
+ if (n > 1)
+ t = list_entry(t->list.next, struct sas_task, list);
} while (--n);
- return 0;
+ rc = 0;
+ goto out_done;
err_out_tag:
mvs_tag_free(mvi, tag);
@@ -1928,7 +2150,7 @@ err_out:
if (n_elem)
pci_unmap_sg(mvi->pdev, t->scatter, n_elem,
t->data_dir);
-exec_exit:
+out_done:
if (pass)
mw32(TX_PROD_IDX, (mvi->tx_prod - 1) & (MVS_CHIP_SLOT_SZ - 1));
spin_unlock_irqrestore(&mvi->lock, flags);
@@ -1937,42 +2159,59 @@ exec_exit:
static int mvs_task_abort(struct sas_task *task)
{
- int rc = 1;
+ int rc;
unsigned long flags;
struct mvs_info *mvi = task->dev->port->ha->lldd_ha;
struct pci_dev *pdev = mvi->pdev;
+ int tag;
spin_lock_irqsave(&task->task_state_lock, flags);
if (task->task_state_flags & SAS_TASK_STATE_DONE) {
rc = TMF_RESP_FUNC_COMPLETE;
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
goto out_done;
}
spin_unlock_irqrestore(&task->task_state_lock, flags);
- /*FIXME*/
- rc = TMF_RESP_FUNC_COMPLETE;
-
switch (task->task_proto) {
case SAS_PROTOCOL_SMP:
- dev_printk(KERN_DEBUG, &pdev->dev, "SMP Abort! ");
+ dev_printk(KERN_DEBUG, &pdev->dev, "SMP Abort! \n");
break;
case SAS_PROTOCOL_SSP:
- dev_printk(KERN_DEBUG, &pdev->dev, "SSP Abort! ");
+ dev_printk(KERN_DEBUG, &pdev->dev, "SSP Abort! \n");
break;
case SAS_PROTOCOL_SATA:
case SAS_PROTOCOL_STP:
case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:{
- dev_printk(KERN_DEBUG, &pdev->dev, "STP Abort! "
- "Dump D2H FIS: \n");
+ dev_printk(KERN_DEBUG, &pdev->dev, "STP Abort! \n");
+#if _MV_DUMP
+ dev_printk(KERN_DEBUG, &pdev->dev, "Dump D2H FIS: \n");
mvs_hexdump(sizeof(struct host_to_dev_fis),
(void *)&task->ata_task.fis, 0);
dev_printk(KERN_DEBUG, &pdev->dev, "Dump ATAPI Cmd : \n");
mvs_hexdump(16, task->ata_task.atapi_packet, 0);
+#endif
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET) {
+ /* TODO */
+ ;
+ }
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
break;
}
default:
break;
}
+
+ if (mvs_find_tag(mvi, task, &tag)) {
+ spin_lock_irqsave(&mvi->lock, flags);
+ mvs_slot_task_free(mvi, task, &mvi->slot_info[tag], tag);
+ spin_unlock_irqrestore(&mvi->lock, flags);
+ }
+ if (!mvs_task_exec(task, 1, GFP_ATOMIC))
+ rc = TMF_RESP_FUNC_COMPLETE;
+ else
+ rc = TMF_RESP_FUNC_FAILED;
out_done:
return rc;
}
@@ -2001,7 +2240,7 @@ static void mvs_free(struct mvs_info *mvi)
mvi->rx_fis, mvi->rx_fis_dma);
if (mvi->rx)
dma_free_coherent(&mvi->pdev->dev,
- sizeof(*mvi->rx) * MVS_RX_RING_SZ,
+ sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1),
mvi->rx, mvi->rx_dma);
if (mvi->slot)
dma_free_coherent(&mvi->pdev->dev,
@@ -2109,6 +2348,9 @@ static struct mvs_info *__devinit mvs_alloc(struct pci_dev *pdev,
return NULL;
spin_lock_init(&mvi->lock);
+#ifdef MVS_USE_TASKLET
+ tasklet_init(&mvi->tasklet, mvs_tasklet, (unsigned long)mvi);
+#endif
mvi->pdev = pdev;
mvi->chip = chip;
@@ -2132,6 +2374,10 @@ static struct mvs_info *__devinit mvs_alloc(struct pci_dev *pdev,
mvs_phy_init(mvi, i);
arr_phy[i] = &mvi->phy[i].sas_phy;
arr_port[i] = &mvi->port[i].sas_port;
+ mvi->port[i].taskfileset = MVS_ID_NOT_MAPPED;
+ mvi->port[i].wide_port_phymap = 0;
+ mvi->port[i].port_attached = 0;
+ INIT_LIST_HEAD(&mvi->port[i].list);
}
SHOST_TO_SAS_HA(mvi->shost) = &mvi->sas;
@@ -2148,9 +2394,10 @@ static struct mvs_info *__devinit mvs_alloc(struct pci_dev *pdev,
mvi->sas.sas_phy = arr_phy;
mvi->sas.sas_port = arr_port;
mvi->sas.num_phys = chip->n_phy;
- mvi->sas.lldd_max_execute_num = MVS_CHIP_SLOT_SZ - 1;
+ mvi->sas.lldd_max_execute_num = 1;
mvi->sas.lldd_queue_size = MVS_QUEUE_SIZE;
- mvi->can_queue = (MVS_CHIP_SLOT_SZ >> 1) - 1;
+ mvi->shost->can_queue = MVS_CAN_QUEUE;
+ mvi->shost->cmd_per_lun = MVS_SLOTS / mvi->sas.num_phys;
mvi->sas.lldd_ha = mvi;
mvi->sas.core.shost = mvi->shost;
@@ -2203,11 +2450,11 @@ static struct mvs_info *__devinit mvs_alloc(struct pci_dev *pdev,
memset(mvi->rx_fis, 0, MVS_RX_FISL_SZ);
mvi->rx = dma_alloc_coherent(&pdev->dev,
- sizeof(*mvi->rx) * MVS_RX_RING_SZ,
+ sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1),
&mvi->rx_dma, GFP_KERNEL);
if (!mvi->rx)
goto err_out;
- memset(mvi->rx, 0, sizeof(*mvi->rx) * MVS_RX_RING_SZ);
+ memset(mvi->rx, 0, sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1));
mvi->rx[0] = cpu_to_le32(0xfff);
mvi->rx_cons = 0xfff;
@@ -2357,7 +2604,7 @@ static void __devinit mvs_phy_hacks(struct mvs_info *mvi)
mvs_cw32(regs, CMD_SAS_CTL0, tmp);
/* workaround for WDTIMEOUT , set to 550 ms */
- mvs_cw32(regs, CMD_WD_TIMER, 0xffffff);
+ mvs_cw32(regs, CMD_WD_TIMER, 0x86470);
/* not to halt for different port op during wideport link change */
mvs_cw32(regs, CMD_APP_ERR_CONFIG, 0xffefbf7d);
@@ -2465,17 +2712,16 @@ static u32 mvs_is_phy_ready(struct mvs_info *mvi, int i)
{
u32 tmp;
struct mvs_phy *phy = &mvi->phy[i];
- struct mvs_port *port;
+ struct mvs_port *port = phy->port;;
tmp = mvs_read_phy_ctl(mvi, i);
if ((tmp & PHY_READY_MASK) && !(phy->irq_status & PHYEV_POOF)) {
- if (!phy->port)
+ if (!port)
phy->phy_attached = 1;
return tmp;
}
- port = phy->port;
if (port) {
if (phy->phy_type & PORT_TYPE_SAS) {
port->wide_port_phymap &= ~(1U << i);
@@ -2497,7 +2743,7 @@ static void mvs_update_phyinfo(struct mvs_info *mvi, int i,
{
struct mvs_phy *phy = &mvi->phy[i];
struct pci_dev *pdev = mvi->pdev;
- u32 tmp, j;
+ u32 tmp;
u64 tmp64;
mvs_write_port_cfg_addr(mvi, i, PHYR_IDENTIFY);
@@ -2524,46 +2770,20 @@ static void mvs_update_phyinfo(struct mvs_info *mvi, int i,
sas_phy->linkrate =
(phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >>
PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET;
-
- /* Updated attached_sas_addr */
- mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_HI);
- phy->att_dev_sas_addr =
- (u64) mvs_read_port_cfg_data(mvi, i) << 32;
-
- mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_LO);
- phy->att_dev_sas_addr |= mvs_read_port_cfg_data(mvi, i);
-
- dev_printk(KERN_DEBUG, &pdev->dev,
- "phy[%d] Get Attached Address 0x%llX ,"
- " SAS Address 0x%llX\n",
- i, phy->att_dev_sas_addr, phy->dev_sas_addr);
- dev_printk(KERN_DEBUG, &pdev->dev,
- "Rate = %x , type = %d\n",
- sas_phy->linkrate, phy->phy_type);
-
-#if 1
- /*
- * If the device is capable of supporting a wide port
- * on its phys, it may configure the phys as a wide port.
- */
- if (phy->phy_type & PORT_TYPE_SAS)
- for (j = 0; j < mvi->chip->n_phy && j != i; ++j) {
- if ((mvi->phy[j].phy_attached) &&
- (mvi->phy[j].phy_type & PORT_TYPE_SAS))
- if (phy->att_dev_sas_addr ==
- mvi->phy[j].att_dev_sas_addr - 1) {
- phy->att_dev_sas_addr =
- mvi->phy[j].att_dev_sas_addr;
- break;
- }
- }
-
-#endif
-
- tmp64 = cpu_to_be64(phy->att_dev_sas_addr);
- memcpy(sas_phy->attached_sas_addr, &tmp64, SAS_ADDR_SIZE);
+ phy->minimum_linkrate =
+ (phy->phy_status &
+ PHY_MIN_SPP_PHYS_LINK_RATE_MASK) >> 8;
+ phy->maximum_linkrate =
+ (phy->phy_status &
+ PHY_MAX_SPP_PHYS_LINK_RATE_MASK) >> 12;
if (phy->phy_type & PORT_TYPE_SAS) {
+ /* Updated attached_sas_addr */
+ mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_HI);
+ phy->att_dev_sas_addr =
+ (u64) mvs_read_port_cfg_data(mvi, i) << 32;
+ mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_LO);
+ phy->att_dev_sas_addr |= mvs_read_port_cfg_data(mvi, i);
mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_DEV_INFO);
phy->att_dev_info = mvs_read_port_cfg_data(mvi, i);
phy->identify.device_type =
@@ -2582,6 +2802,7 @@ static void mvs_update_phyinfo(struct mvs_info *mvi, int i,
} else if (phy->phy_type & PORT_TYPE_SATA) {
phy->identify.target_port_protocols = SAS_PROTOCOL_STP;
if (mvs_is_sig_fis_received(phy->irq_status)) {
+ phy->att_dev_sas_addr = i; /* temp */
if (phy_st & PHY_OOB_DTCTD)
sas_phy->oob_mode = SATA_OOB_MODE;
phy->frame_rcvd_size =
@@ -2591,20 +2812,34 @@ static void mvs_update_phyinfo(struct mvs_info *mvi, int i,
} else {
dev_printk(KERN_DEBUG, &pdev->dev,
"No sig fis\n");
+ phy->phy_type &= ~(PORT_TYPE_SATA);
+ goto out_done;
}
}
+ tmp64 = cpu_to_be64(phy->att_dev_sas_addr);
+ memcpy(sas_phy->attached_sas_addr, &tmp64, SAS_ADDR_SIZE);
+
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "phy[%d] Get Attached Address 0x%llX ,"
+ " SAS Address 0x%llX\n",
+ i, phy->att_dev_sas_addr, phy->dev_sas_addr);
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "Rate = %x , type = %d\n",
+ sas_phy->linkrate, phy->phy_type);
+
/* workaround for HW phy decoding error on 1.5g disk drive */
mvs_write_port_vsr_addr(mvi, i, VSR_PHY_MODE6);
tmp = mvs_read_port_vsr_data(mvi, i);
if (((phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >>
PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET) ==
SAS_LINK_RATE_1_5_GBPS)
- tmp &= ~PHY_MODE6_DTL_SPEED;
+ tmp &= ~PHY_MODE6_LATECLK;
else
- tmp |= PHY_MODE6_DTL_SPEED;
+ tmp |= PHY_MODE6_LATECLK;
mvs_write_port_vsr_data(mvi, i, tmp);
}
+out_done:
if (get_st)
mvs_write_port_irq_stat(mvi, i, phy->irq_status);
}
@@ -2629,6 +2864,11 @@ static void mvs_port_formed(struct asd_sas_phy *sas_phy)
spin_unlock_irqrestore(&mvi->lock, flags);
}
+static int mvs_I_T_nexus_reset(struct domain_device *dev)
+{
+ return TMF_RESP_FUNC_FAILED;
+}
+
static int __devinit mvs_hw_init(struct mvs_info *mvi)
{
void __iomem *regs = mvi->regs;
@@ -2790,13 +3030,12 @@ static int __devinit mvs_hw_init(struct mvs_info *mvi)
/* enable CMD/CMPL_Q/RESP mode */
mw32(PCS, PCS_SATA_RETRY | PCS_FIS_RX_EN | PCS_CMD_EN);
- /* re-enable interrupts globally */
- mvs_hba_interrupt_enable(mvi);
-
/* enable completion queue interrupt */
- tmp = (CINT_PORT_MASK | CINT_DONE | CINT_MEM);
+ tmp = (CINT_PORT_MASK | CINT_DONE | CINT_MEM | CINT_SRS);
mw32(INT_MASK, tmp);
+ /* Enable SRS interrupt */
+ mw32(INT_MASK_SRS, 0xFF);
return 0;
}
@@ -2870,6 +3109,8 @@ static int __devinit mvs_pci_init(struct pci_dev *pdev,
mvs_print_info(mvi);
+ mvs_hba_interrupt_enable(mvi);
+
scsi_scan_host(mvi->shost);
return 0;
@@ -2915,12 +3156,22 @@ static struct sas_domain_function_template mvs_transport_ops = {
.lldd_execute_task = mvs_task_exec,
.lldd_control_phy = mvs_phy_control,
.lldd_abort_task = mvs_task_abort,
- .lldd_port_formed = mvs_port_formed
+ .lldd_port_formed = mvs_port_formed,
+ .lldd_I_T_nexus_reset = mvs_I_T_nexus_reset,
};
static struct pci_device_id __devinitdata mvs_pci_table[] = {
{ PCI_VDEVICE(MARVELL, 0x6320), chip_6320 },
{ PCI_VDEVICE(MARVELL, 0x6340), chip_6440 },
+ {
+ .vendor = PCI_VENDOR_ID_MARVELL,
+ .device = 0x6440,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = 0x6480,
+ .class = 0,
+ .class_mask = 0,
+ .driver_data = chip_6480,
+ },
{ PCI_VDEVICE(MARVELL, 0x6440), chip_6440 },
{ PCI_VDEVICE(MARVELL, 0x6480), chip_6480 },
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index ba21d97d185..f40898dc2d1 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -2162,10 +2162,15 @@ void sdev_evt_send(struct scsi_device *sdev, struct scsi_event *evt)
{
unsigned long flags;
+#if 0
+ /* FIXME: currently this check eliminates all media change events
+ * for polled devices. Need to update to discriminate between AN
+ * and polled events */
if (!test_bit(evt->evt_type, sdev->supported_events)) {
kfree(evt);
return;
}
+#endif
spin_lock_irqsave(&sdev->list_lock, flags);
list_add_tail(&evt->node, &sdev->event_list);
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 7aee64dbfbe..5fe7aaed904 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1654,6 +1654,7 @@ static int sd_probe(struct device *dev)
sdkp->disk = gd;
sdkp->index = index;
sdkp->openers = 0;
+ sdkp->previous_state = 1;
if (!sdp->timeout) {
if (sdp->type != TYPE_MOD)
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index 208565bdbe8..7ee86d4a761 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -623,6 +623,7 @@ static int sr_probe(struct device *dev)
cd->disk = disk;
cd->capacity = 0x1fffff;
cd->device->changed = 1; /* force recheck CD type */
+ cd->previous_state = 1;
cd->use = 1;
cd->readcd_known = 0;
cd->readcd_cdda = 0;
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index a8bec498cad..f97224ce59d 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -1214,13 +1214,6 @@ static struct pciserial_board pci_boards[] __devinitdata = {
.base_baud = 115200,
.uart_offset = 8,
},
- [pbn_b0_8_115200] = {
- .flags = FL_BASE0,
- .num_ports = 8,
- .base_baud = 115200,
- .uart_offset = 8,
- },
-
[pbn_b0_1_921600] = {
.flags = FL_BASE0,
.num_ports = 1,
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index d57bf3e708d..430997e33fc 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -96,6 +96,7 @@
/* PDC registers */
#define UART_PUT_PTCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_PTCR)
+#define UART_GET_TCR(port) __raw_readl((port)->membase + ATMEL_PDC_TCR)
#define UART_GET_PTSR(port) __raw_readl((port)->membase + ATMEL_PDC_PTSR)
#define UART_PUT_RPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RPR)
@@ -106,6 +107,7 @@
#define UART_PUT_TPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TPR)
#define UART_PUT_TCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TCR)
+#define UART_GET_TCR(port) __raw_readl((port)->membase + ATMEL_PDC_TCR)
static int (*atmel_open_hook)(struct uart_port *);
static void (*atmel_close_hook)(struct uart_port *);
@@ -562,17 +564,22 @@ static void atmel_tx_dma(struct uart_port *port)
struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
int count;
+ /* nothing left to transmit? */
+ if (UART_GET_TCR(port))
+ return;
+
xmit->tail += pdc->ofs;
xmit->tail &= UART_XMIT_SIZE - 1;
port->icount.tx += pdc->ofs;
pdc->ofs = 0;
- if (!uart_circ_empty(xmit)) {
- /* more to transmit - setup next transfer */
+ /* more to transmit - setup next transfer */
- /* disable PDC transmit */
- UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
+ /* disable PDC transmit */
+ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
+
+ if (!uart_circ_empty(xmit)) {
dma_sync_single_for_device(port->dev,
pdc->dma_addr,
pdc->dma_size,
@@ -586,11 +593,6 @@ static void atmel_tx_dma(struct uart_port *port)
/* re-enable PDC transmit and interrupts */
UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
- } else {
- /* nothing left to transmit - disable the transmitter */
-
- /* disable PDC transmit */
- UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
}
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -1274,6 +1276,7 @@ static void atmel_console_write(struct console *co, const char *s, u_int count)
{
struct uart_port *port = &atmel_ports[co->index].uart;
unsigned int status, imr;
+ unsigned int pdc_tx;
/*
* First, save IMR and then disable interrupts
@@ -1281,6 +1284,10 @@ static void atmel_console_write(struct console *co, const char *s, u_int count)
imr = UART_GET_IMR(port);
UART_PUT_IDR(port, ATMEL_US_RXRDY | ATMEL_US_TXRDY);
+ /* Store PDC transmit status and disable it */
+ pdc_tx = UART_GET_PTSR(port) & ATMEL_PDC_TXTEN;
+ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
+
uart_console_write(port, s, count, atmel_console_putchar);
/*
@@ -1290,6 +1297,11 @@ static void atmel_console_write(struct console *co, const char *s, u_int count)
do {
status = UART_GET_CSR(port);
} while (!(status & ATMEL_US_TXRDY));
+
+ /* Restore PDC transmit status */
+ if (pdc_tx)
+ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
+
/* set interrupts back the way they were */
UART_PUT_IER(port, imr);
}
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index a8c116b80bf..9d244d1644e 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -414,12 +414,12 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
defined(CONFIG_CPU_SUBTYPE_SH7785)
static inline int scif_txroom(struct uart_port *port)
{
- return SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0x7f);
+ return SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0xff);
}
static inline int scif_rxroom(struct uart_port *port)
{
- return sci_in(port, SCRFDR) & 0x7f;
+ return sci_in(port, SCRFDR) & 0xff;
}
#else
static inline int scif_txroom(struct uart_port *port)
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 3ab313ed441..17e71d56f31 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -4,8 +4,6 @@
menuconfig THERMAL
bool "Generic Thermal sysfs driver"
- select HWMON
- default y
help
Generic Thermal Sysfs driver offers a generic mechanism for
thermal management. Usually it's made up of one or more thermal
diff --git a/drivers/thermal/thermal.c b/drivers/thermal/thermal.c
index 41bd4c805ac..8b86e53ccf7 100644
--- a/drivers/thermal/thermal.c
+++ b/drivers/thermal/thermal.c
@@ -30,10 +30,8 @@
#include <linux/idr.h>
#include <linux/thermal.h>
#include <linux/spinlock.h>
-#include <linux/hwmon.h>
-#include <linux/hwmon-sysfs.h>
-MODULE_AUTHOR("Zhang Rui");
+MODULE_AUTHOR("Zhang Rui")
MODULE_DESCRIPTION("Generic thermal management sysfs support");
MODULE_LICENSE("GPL");
@@ -58,9 +56,6 @@ static LIST_HEAD(thermal_tz_list);
static LIST_HEAD(thermal_cdev_list);
static DEFINE_MUTEX(thermal_list_lock);
-static struct device *thermal_hwmon;
-#define MAX_THERMAL_ZONES 10
-
static int get_idr(struct idr *idr, struct mutex *lock, int *id)
{
int err;
@@ -92,67 +87,7 @@ static void release_idr(struct idr *idr, struct mutex *lock, int id)
mutex_unlock(lock);
}
-/* hwmon sys I/F*/
-static ssize_t
-name_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
- return sprintf(buf, "thermal_sys_class\n");
-}
-
-static ssize_t
-temp_input_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct thermal_zone_device *tz;
- struct sensor_device_attribute *sensor_attr
- = to_sensor_dev_attr(attr);
-
- list_for_each_entry(tz, &thermal_tz_list, node)
- if (tz->id == sensor_attr->index)
- return tz->ops->get_temp(tz, buf);
-
- return -ENODEV;
-}
-
-static ssize_t
-temp_crit_show(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct thermal_zone_device *tz;
- struct sensor_device_attribute *sensor_attr
- = to_sensor_dev_attr(attr);
-
- list_for_each_entry(tz, &thermal_tz_list, node)
- if (tz->id == sensor_attr->index)
- return tz->ops->get_trip_temp(tz, 0, buf);
-
- return -ENODEV;
-}
-
-static DEVICE_ATTR(name, 0444, name_show, NULL);
-static struct sensor_device_attribute sensor_attrs[] = {
- SENSOR_ATTR(temp1_input, 0444, temp_input_show, NULL, 0),
- SENSOR_ATTR(temp1_crit, 0444, temp_crit_show, NULL, 0),
- SENSOR_ATTR(temp2_input, 0444, temp_input_show, NULL, 1),
- SENSOR_ATTR(temp2_crit, 0444, temp_crit_show, NULL, 1),
- SENSOR_ATTR(temp3_input, 0444, temp_input_show, NULL, 2),
- SENSOR_ATTR(temp3_crit, 0444, temp_crit_show, NULL, 2),
- SENSOR_ATTR(temp4_input, 0444, temp_input_show, NULL, 3),
- SENSOR_ATTR(temp4_crit, 0444, temp_crit_show, NULL, 3),
- SENSOR_ATTR(temp5_input, 0444, temp_input_show, NULL, 4),
- SENSOR_ATTR(temp5_crit, 0444, temp_crit_show, NULL, 4),
- SENSOR_ATTR(temp6_input, 0444, temp_input_show, NULL, 5),
- SENSOR_ATTR(temp6_crit, 0444, temp_crit_show, NULL, 5),
- SENSOR_ATTR(temp7_input, 0444, temp_input_show, NULL, 6),
- SENSOR_ATTR(temp7_crit, 0444, temp_crit_show, NULL, 6),
- SENSOR_ATTR(temp8_input, 0444, temp_input_show, NULL, 7),
- SENSOR_ATTR(temp8_crit, 0444, temp_crit_show, NULL, 7),
- SENSOR_ATTR(temp9_input, 0444, temp_input_show, NULL, 8),
- SENSOR_ATTR(temp9_crit, 0444, temp_crit_show, NULL, 8),
- SENSOR_ATTR(temp10_input, 0444, temp_input_show, NULL, 9),
- SENSOR_ATTR(temp10_crit, 0444, temp_crit_show, NULL, 9),
-};
-
-/* thermal zone sys I/F */
+/* sys I/F for thermal zone */
#define to_thermal_zone(_dev) \
container_of(_dev, struct thermal_zone_device, device)
@@ -279,7 +214,7 @@ do { \
device_remove_file(_dev, &trip_point_attrs[_index * 2 + 1]); \
} while (0)
-/* cooling device sys I/F */
+/* sys I/F for cooling device */
#define to_cooling_device(_dev) \
container_of(_dev, struct thermal_cooling_device, device)
@@ -512,9 +447,6 @@ struct thermal_cooling_device *thermal_cooling_device_register(char *type,
struct thermal_zone_device *pos;
int result;
- if (!type)
- return ERR_PTR(-EINVAL);
-
if (strlen(type) >= THERMAL_NAME_LENGTH)
return ERR_PTR(-EINVAL);
@@ -545,9 +477,11 @@ struct thermal_cooling_device *thermal_cooling_device_register(char *type,
}
/* sys I/F */
- result = device_create_file(&cdev->device, &dev_attr_cdev_type);
- if (result)
- goto unregister;
+ if (type) {
+ result = device_create_file(&cdev->device, &dev_attr_cdev_type);
+ if (result)
+ goto unregister;
+ }
result = device_create_file(&cdev->device, &dev_attr_max_state);
if (result)
@@ -613,8 +547,8 @@ void thermal_cooling_device_unregister(struct
tz->ops->unbind(tz, cdev);
}
mutex_unlock(&thermal_list_lock);
-
- device_remove_file(&cdev->device, &dev_attr_cdev_type);
+ if (cdev->type[0])
+ device_remove_file(&cdev->device, &dev_attr_cdev_type);
device_remove_file(&cdev->device, &dev_attr_max_state);
device_remove_file(&cdev->device, &dev_attr_cur_state);
@@ -646,9 +580,6 @@ struct thermal_zone_device *thermal_zone_device_register(char *type,
int result;
int count;
- if (!type)
- return ERR_PTR(-EINVAL);
-
if (strlen(type) >= THERMAL_NAME_LENGTH)
return ERR_PTR(-EINVAL);
@@ -670,13 +601,6 @@ struct thermal_zone_device *thermal_zone_device_register(char *type,
kfree(tz);
return ERR_PTR(result);
}
- if (tz->id >= MAX_THERMAL_ZONES) {
- printk(KERN_ERR PREFIX
- "Too many thermal zones\n");
- release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id);
- kfree(tz);
- return ERR_PTR(-EINVAL);
- }
strcpy(tz->type, type);
tz->ops = ops;
@@ -691,27 +615,12 @@ struct thermal_zone_device *thermal_zone_device_register(char *type,
return ERR_PTR(result);
}
- /* hwmon sys I/F */
- result = device_create_file(thermal_hwmon,
- &sensor_attrs[tz->id * 2].dev_attr);
- if (result)
- goto unregister;
-
- if (trips > 0) {
- char buf[40];
- result = tz->ops->get_trip_type(tz, 0, buf);
- if (result > 0 && !strcmp(buf, "critical\n")) {
- result = device_create_file(thermal_hwmon,
- &sensor_attrs[tz->id * 2 + 1].dev_attr);
- if (result)
- goto unregister;
- }
- }
-
/* sys I/F */
- result = device_create_file(&tz->device, &dev_attr_type);
- if (result)
- goto unregister;
+ if (type) {
+ result = device_create_file(&tz->device, &dev_attr_type);
+ if (result)
+ goto unregister;
+ }
result = device_create_file(&tz->device, &dev_attr_temp);
if (result)
@@ -778,17 +687,8 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz)
tz->ops->unbind(tz, cdev);
mutex_unlock(&thermal_list_lock);
- device_remove_file(thermal_hwmon,
- &sensor_attrs[tz->id * 2].dev_attr);
- if (tz->trips > 0) {
- char buf[40];
- if (tz->ops->get_trip_type(tz, 0, buf) > 0)
- if (!strcmp(buf, "critical\n"))
- device_remove_file(thermal_hwmon,
- &sensor_attrs[tz->id * 2 + 1].dev_attr);
- }
-
- device_remove_file(&tz->device, &dev_attr_type);
+ if (tz->type[0])
+ device_remove_file(&tz->device, &dev_attr_type);
device_remove_file(&tz->device, &dev_attr_temp);
if (tz->ops->get_mode)
device_remove_file(&tz->device, &dev_attr_mode);
@@ -805,19 +705,6 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz)
EXPORT_SYMBOL(thermal_zone_device_unregister);
-static void thermal_exit(void)
-{
- if (thermal_hwmon) {
- device_remove_file(thermal_hwmon, &dev_attr_name);
- hwmon_device_unregister(thermal_hwmon);
- }
- class_unregister(&thermal_class);
- idr_destroy(&thermal_tz_idr);
- idr_destroy(&thermal_cdev_idr);
- mutex_destroy(&thermal_idr_lock);
- mutex_destroy(&thermal_list_lock);
-}
-
static int __init thermal_init(void)
{
int result = 0;
@@ -829,21 +716,17 @@ static int __init thermal_init(void)
mutex_destroy(&thermal_idr_lock);
mutex_destroy(&thermal_list_lock);
}
-
- thermal_hwmon = hwmon_device_register(NULL);
- if (IS_ERR(thermal_hwmon)) {
- result = PTR_ERR(thermal_hwmon);
- thermal_hwmon = NULL;
- printk(KERN_ERR PREFIX
- "unable to register hwmon device\n");
- thermal_exit();
- return result;
- }
-
- result = device_create_file(thermal_hwmon, &dev_attr_name);
-
return result;
}
+static void __exit thermal_exit(void)
+{
+ class_unregister(&thermal_class);
+ idr_destroy(&thermal_tz_idr);
+ idr_destroy(&thermal_cdev_idr);
+ mutex_destroy(&thermal_idr_lock);
+ mutex_destroy(&thermal_list_lock);
+}
+
subsys_initcall(thermal_init);
module_exit(thermal_exit);
diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c
index e8a01f26454..11759080ca5 100644
--- a/drivers/uio/uio.c
+++ b/drivers/uio/uio.c
@@ -470,6 +470,8 @@ static int uio_mmap_physical(struct vm_area_struct *vma)
vma->vm_flags |= VM_IO | VM_RESERVED;
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
return remap_pfn_range(vma,
vma->vm_start,
idev->info->mem[mi].addr >> PAGE_SHIFT,
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index fefb92296e8..c311f67b7f0 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1206,7 +1206,10 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
return -EINVAL;
}
- ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ if (dev->quirks & USB_QUIRK_NO_SET_INTF)
+ ret = -EPIPE;
+ else
+ ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
USB_REQ_SET_INTERFACE, USB_RECIP_INTERFACE,
alternate, interface, NULL, 0, 5000);
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index d9d1eb19f2a..dfc5418ea10 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -50,6 +50,9 @@ static const struct usb_device_id usb_quirk_list[] = {
/* M-Systems Flash Disk Pioneers */
{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */
+ { USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF },
+
/* Action Semiconductor flash disk */
{ USB_DEVICE(0x10d6, 0x2200), .driver_info =
USB_QUIRK_STRING_FETCH_255 },
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 805602a687c..0a6feafc8d2 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -1458,7 +1458,7 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
/* currently one config, two speeds */
case USB_REQ_SET_CONFIGURATION:
if (ctrl->bRequestType != 0)
- break;
+ goto unrecognized;
if (0 == (u8) w_value) {
value = 0;
dev->current_config = 0;
@@ -1505,7 +1505,7 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
/* PXA automagically handles this request too */
case USB_REQ_GET_CONFIGURATION:
if (ctrl->bRequestType != 0x80)
- break;
+ goto unrecognized;
*(u8 *)req->buf = dev->current_config;
value = min (w_length, (u16) 1);
break;
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 40e8240b785..4e065e556e4 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -135,8 +135,6 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
hcd->state = HC_STATE_QUIESCING;
}
ehci->command = ehci_readl(ehci, &ehci->regs->command);
- if (ehci->reclaim)
- end_unlink_async(ehci);
ehci_work(ehci);
/* Unlike other USB host controller types, EHCI doesn't have
@@ -180,6 +178,9 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
ehci_halt (ehci);
hcd->state = HC_STATE_SUSPENDED;
+ if (ehci->reclaim)
+ end_unlink_async(ehci);
+
/* allow remote wakeup */
mask = INTR_MASK;
if (!device_may_wakeup(&hcd->self.root_hub->dev))
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 3ba01664f82..72ccd56e36d 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -152,6 +152,20 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
break;
}
break;
+ case PCI_VENDOR_ID_VIA:
+ if (pdev->device == 0x3104 && (pdev->revision & 0xf0) == 0x60) {
+ u8 tmp;
+
+ /* The VT6212 defaults to a 1 usec EHCI sleep time which
+ * hogs the PCI bus *badly*. Setting bit 5 of 0x4B makes
+ * that sleep time use the conventional 10 usec.
+ */
+ pci_read_config_byte(pdev, 0x4b, &tmp);
+ if (tmp & 0x20)
+ break;
+ pci_write_config_byte(pdev, 0x4b, tmp | 0x20);
+ }
+ break;
}
ehci_reset(ehci);
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index dd4798ee028..33f1c1c32ed 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -467,7 +467,7 @@ static void unlink_watchdog_func(unsigned long _ohci)
out:
kfree(seen);
if (ohci->eds_scheduled)
- mod_timer(&ohci->unlink_watchdog, round_jiffies_relative(HZ));
+ mod_timer(&ohci->unlink_watchdog, round_jiffies(jiffies + HZ));
done:
spin_unlock_irqrestore(&ohci->lock, flags);
}
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index 51817322232..9c9f3b59186 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -169,7 +169,7 @@ static int ed_schedule (struct ohci_hcd *ohci, struct ed *ed)
if (quirk_zfmicro(ohci)
&& (ed->type == PIPE_INTERRUPT)
&& !(ohci->eds_scheduled++))
- mod_timer(&ohci->unlink_watchdog, round_jiffies_relative(HZ));
+ mod_timer(&ohci->unlink_watchdog, round_jiffies(jiffies + HZ));
wmb ();
/* we care about rm_list when setting CLE/BLE in case the HC was at
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index da922dfc0dc..b6b5b2affad 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -378,6 +378,7 @@ alloc_sglist (int nents, int max, int vary)
sg = kmalloc (nents * sizeof *sg, GFP_KERNEL);
if (!sg)
return NULL;
+ sg_init_table(sg, nents);
for (i = 0; i < nents; i++) {
char *buf;
@@ -390,7 +391,7 @@ alloc_sglist (int nents, int max, int vary)
}
/* kmalloc pages are always physically contiguous! */
- sg_init_one(&sg[i], buf, size);
+ sg_set_buf(&sg[i], buf, size);
switch (pattern) {
case 0:
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index f3ca66017a0..324bb61d68f 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -75,6 +75,7 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
{ USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
+ { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index 8a0d1740152..74ce8bca3e6 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -637,6 +637,7 @@ static struct usb_serial_driver keyspan_pre_device = {
.description = "Keyspan - (without firmware)",
.id_table = keyspan_pre_ids,
.num_interrupt_in = NUM_DONT_CARE,
+ .num_interrupt_out = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
.num_ports = 1,
@@ -651,6 +652,7 @@ static struct usb_serial_driver keyspan_1port_device = {
.description = "Keyspan 1 port adapter",
.id_table = keyspan_1port_ids,
.num_interrupt_in = NUM_DONT_CARE,
+ .num_interrupt_out = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
.num_ports = 1,
@@ -678,6 +680,7 @@ static struct usb_serial_driver keyspan_2port_device = {
.description = "Keyspan 2 port adapter",
.id_table = keyspan_2port_ids,
.num_interrupt_in = NUM_DONT_CARE,
+ .num_interrupt_out = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
.num_ports = 2,
@@ -705,6 +708,7 @@ static struct usb_serial_driver keyspan_4port_device = {
.description = "Keyspan 4 port adapter",
.id_table = keyspan_4port_ids,
.num_interrupt_in = NUM_DONT_CARE,
+ .num_interrupt_out = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
.num_ports = 4,
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index ae3ec1a6400..2af778555bd 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -55,6 +55,7 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 237a41f6638..10cf872e5ec 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -13,6 +13,7 @@
#define PL2303_PRODUCT_ID_DCU11 0x1234
#define PL2303_PRODUCT_ID_PHAROS 0xaaa0
#define PL2303_PRODUCT_ID_RSAQ3 0xaaa2
+#define PL2303_PRODUCT_ID_ALDIGA 0x0611
#define ATEN_VENDOR_ID 0x0557
#define ATEN_VENDOR_ID2 0x0547
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index e3d44ae8d44..ed678811e6a 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -14,7 +14,7 @@
Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org>
*/
-#define DRIVER_VERSION "v.1.2.7"
+#define DRIVER_VERSION "v.1.2.8"
#define DRIVER_AUTHOR "Kevin Lloyd <linux@sierrawireless.com>"
#define DRIVER_DESC "USB Driver for Sierra Wireless USB modems"
@@ -163,6 +163,7 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */
{ USB_DEVICE(0x1199, 0x6812) }, /* Sierra Wireless MC8775 & AC 875U */
{ USB_DEVICE(0x1199, 0x6813) }, /* Sierra Wireless MC8775 (Thinkpad internal) */
+ { USB_DEVICE(0x1199, 0x6815) }, /* Sierra Wireless MC8775 */
{ USB_DEVICE(0x1199, 0x6820) }, /* Sierra Wireless AirCard 875 */
{ USB_DEVICE(0x1199, 0x6832) }, /* Sierra Wireless MC8780*/
{ USB_DEVICE(0x1199, 0x6833) }, /* Sierra Wireless MC8781*/
@@ -196,9 +197,9 @@ struct sierra_port_private {
spinlock_t lock; /* lock the structure */
int outstanding_urbs; /* number of out urbs in flight */
- /* Input endpoints and buffer for this port */
+ /* Input endpoints and buffers for this port */
struct urb *in_urbs[N_IN_URB];
- char in_buffer[N_IN_URB][IN_BUFLEN];
+ char *in_buffer[N_IN_URB];
/* Settings for the port */
int rts_state; /* Handshaking pins (outputs) */
@@ -638,6 +639,15 @@ static int sierra_startup(struct usb_serial *serial)
return -ENOMEM;
}
spin_lock_init(&portdata->lock);
+ for (j = 0; j < N_IN_URB; j++) {
+ portdata->in_buffer[j] = kmalloc(IN_BUFLEN, GFP_KERNEL);
+ if (!portdata->in_buffer[j]) {
+ for (--j; j >= 0; j--)
+ kfree(portdata->in_buffer[j]);
+ kfree(portdata);
+ return -ENOMEM;
+ }
+ }
usb_set_serial_port_data(port, portdata);
@@ -681,7 +691,7 @@ static void sierra_shutdown(struct usb_serial *serial)
for (j = 0; j < N_IN_URB; j++) {
usb_kill_urb(portdata->in_urbs[j]);
usb_free_urb(portdata->in_urbs[j]);
- portdata->in_urbs[j] = NULL;
+ kfree(portdata->in_buffer[j]);
}
kfree(portdata);
usb_set_serial_port_data(port, NULL);
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index b517f93352e..e3d241f67af 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -265,8 +265,8 @@ static struct usb_serial_driver ti_1port_device = {
.description = "TI USB 3410 1 port adapter",
.usb_driver = &ti_usb_driver,
.id_table = ti_id_table_3410,
- .num_interrupt_in = 1,
- .num_bulk_in = 1,
+ .num_interrupt_in = NUM_DONT_CARE,
+ .num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = 1,
.num_ports = 1,
.attach = ti_startup,
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 22b3f78a388..c2b01f7c319 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -191,7 +191,7 @@ static struct usb_serial_driver handspring_device = {
.id_table = id_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 2,
- .num_bulk_out = 2,
+ .num_bulk_out = NUM_DONT_CARE,
.num_ports = 2,
.open = visor_open,
.close = visor_close,
diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
index 2ae1e8673b1..971d13dd5e6 100644
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -1230,6 +1230,7 @@ static int isd200_get_inquiry_data( struct us_data *us )
/* Free driver structure */
us->extra_destructor(info);
+ kfree(info);
us->extra = NULL;
us->extra_destructor = NULL;
}
@@ -1469,6 +1470,7 @@ static void isd200_free_info_ptrs(void *info_)
if (info) {
kfree(info->id);
kfree(info->RegsBuf);
+ kfree(info->srb.sense_buffer);
}
}
@@ -1494,7 +1496,9 @@ static int isd200_init_info(struct us_data *us)
kzalloc(sizeof(struct hd_driveid), GFP_KERNEL);
info->RegsBuf = (unsigned char *)
kmalloc(sizeof(info->ATARegs), GFP_KERNEL);
- if (!info->id || !info->RegsBuf) {
+ info->srb.sense_buffer =
+ kmalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL);
+ if (!info->id || !info->RegsBuf || !info->srb.sense_buffer) {
isd200_free_info_ptrs(info);
kfree(info);
retStatus = ISD200_ERROR;
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index 5780ed15f1a..bdd4334bed5 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -1009,7 +1009,8 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
US_DEBUGP("Bulk Status S 0x%x T 0x%x R %u Stat 0x%x\n",
le32_to_cpu(bcs->Signature), bcs->Tag,
residue, bcs->Status);
- if (bcs->Tag != us->tag || bcs->Status > US_BULK_STAT_PHASE) {
+ if (!(bcs->Tag == us->tag || (us->flags & US_FL_BULK_IGNORE_TAG)) ||
+ bcs->Status > US_BULK_STAT_PHASE) {
US_DEBUGP("Bulk logical error\n");
return USB_STOR_TRANSPORT_ERROR;
}
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 99679a8cfa0..e5219a56947 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1589,6 +1589,17 @@ UNUSUAL_DEV( 0x22b8, 0x4810, 0x0001, 0x0001,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
+/*
+ * Patch by Constantin Baranov <const@tltsu.ru>
+ * Report by Andreas Koenecke.
+ * Motorola ROKR Z6.
+ */
+UNUSUAL_DEV( 0x22b8, 0x6426, 0x0101, 0x0101,
+ "Motorola",
+ "MSnc.",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY | US_FL_BULK_IGNORE_TAG),
+
/* Reported by Radovan Garabik <garabik@kassiopeia.juls.savba.sk> */
UNUSUAL_DEV( 0x2735, 0x100b, 0x0000, 0x9999,
"MPIO",
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index e0b0580705e..1bd5fb30237 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1893,6 +1893,20 @@ config FB_XILINX
framebuffer. ML300 carries a 640*480 LCD display on the board,
ML403 uses a standard DB15 VGA connector.
+config FB_METRONOME
+ tristate "Metronome display controller support"
+ depends on FB && ARCH_PXA && MMU
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select FB_DEFERRED_IO
+ help
+ This enables support for the Metronome display controller. Tested
+ with an E-Ink 800x600 display and Gumstix Connex through an AMLCD
+ interface. Please read <file:Documentation/fb/metronomefb.txt>
+ for more information.
+
config FB_VIRTUAL
tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
depends on FB
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 03371c78903..11c0e5e05f2 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -103,6 +103,7 @@ obj-$(CONFIG_FB_PMAG_AA) += pmag-aa-fb.o
obj-$(CONFIG_FB_PMAG_BA) += pmag-ba-fb.o
obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o
obj-$(CONFIG_FB_MAXINE) += maxinefb.o
+obj-$(CONFIG_FB_METRONOME) += metronomefb.o
obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o
obj-$(CONFIG_FB_IMX) += imxfb.o
obj-$(CONFIG_FB_S3C2410) += s3c2410fb.o
diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/bf54x-lq043fb.c
index 986a550c043..eefba3d0e4b 100644
--- a/drivers/video/bf54x-lq043fb.c
+++ b/drivers/video/bf54x-lq043fb.c
@@ -384,7 +384,7 @@ static int bfin_bf54x_fb_mmap(struct fb_info *info, struct vm_area_struct *vma)
* Other flags can be set, and are documented in
* include/linux/mm.h
*/
- vma->vm_flags |= VM_MAYSHARE;
+ vma->vm_flags |= VM_MAYSHARE | VM_SHARED;
return 0;
}
diff --git a/drivers/video/bfin-t350mcqb-fb.c b/drivers/video/bfin-t350mcqb-fb.c
index a2bb2de9e02..135d6dd7e67 100644
--- a/drivers/video/bfin-t350mcqb-fb.c
+++ b/drivers/video/bfin-t350mcqb-fb.c
@@ -91,6 +91,7 @@ struct bfin_t350mcqbfb_info {
int lq043_open_cnt;
int irq;
spinlock_t lock; /* lock */
+ u32 pseudo_pal[16];
};
static int nocursor;
@@ -182,13 +183,13 @@ static void bfin_t350mcqb_config_dma(struct bfin_t350mcqbfb_info *fbi)
}
-static int bfin_t350mcqb_request_ports(int action)
-{
- u16 ppi0_req_8[] = {P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
+static u16 ppi0_req_8[] = {P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
P_PPI0_D0, P_PPI0_D1, P_PPI0_D2,
P_PPI0_D3, P_PPI0_D4, P_PPI0_D5,
P_PPI0_D6, P_PPI0_D7, 0};
+static int bfin_t350mcqb_request_ports(int action)
+{
if (action) {
if (peripheral_request_list(ppi0_req_8, DRIVER_NAME)) {
printk(KERN_ERR "Requesting Peripherals faild\n");
@@ -301,7 +302,7 @@ static int bfin_t350mcqb_fb_mmap(struct fb_info *info, struct vm_area_struct *vm
* Other flags can be set, and are documented in
* include/linux/mm.h
*/
- vma->vm_flags |= VM_MAYSHARE;
+ vma->vm_flags |= VM_MAYSHARE | VM_SHARED;
return 0;
}
@@ -520,16 +521,7 @@ static int __init bfin_t350mcqb_probe(struct platform_device *pdev)
fbinfo->fbops = &bfin_t350mcqb_fb_ops;
- fbinfo->pseudo_palette = kmalloc(sizeof(u32) * 16, GFP_KERNEL);
- if (!fbinfo->pseudo_palette) {
- printk(KERN_ERR DRIVER_NAME
- "Fail to allocate pseudo_palette\n");
-
- ret = -ENOMEM;
- goto out4;
- }
-
- memset(fbinfo->pseudo_palette, 0, sizeof(u32) * 16);
+ fbinfo->pseudo_palette = &info->pseudo_pal;
if (fb_alloc_cmap(&fbinfo->cmap, BFIN_LCD_NBR_PALETTE_ENTRIES, 0)
< 0) {
@@ -537,7 +529,7 @@ static int __init bfin_t350mcqb_probe(struct platform_device *pdev)
"Fail to allocate colormap (%d entries)\n",
BFIN_LCD_NBR_PALETTE_ENTRIES);
ret = -EFAULT;
- goto out5;
+ goto out4;
}
if (bfin_t350mcqb_request_ports(1)) {
@@ -552,11 +544,11 @@ static int __init bfin_t350mcqb_probe(struct platform_device *pdev)
goto out7;
}
- if (request_irq(info->irq, (void *)bfin_t350mcqb_irq_error, IRQF_DISABLED,
- "PPI ERROR", info) < 0) {
+ ret = request_irq(info->irq, bfin_t350mcqb_irq_error, IRQF_DISABLED,
+ "PPI ERROR", info);
+ if (ret < 0) {
printk(KERN_ERR DRIVER_NAME
": unable to request PPI ERROR IRQ\n");
- ret = -EFAULT;
goto out7;
}
@@ -584,8 +576,6 @@ out7:
bfin_t350mcqb_request_ports(0);
out6:
fb_dealloc_cmap(&fbinfo->cmap);
-out5:
- kfree(fbinfo->pseudo_palette);
out4:
dma_free_coherent(NULL, fbinfo->fix.smem_len, info->fb_buffer,
info->dma_handle);
@@ -605,6 +595,8 @@ static int bfin_t350mcqb_remove(struct platform_device *pdev)
struct fb_info *fbinfo = platform_get_drvdata(pdev);
struct bfin_t350mcqbfb_info *info = fbinfo->par;
+ unregister_framebuffer(fbinfo);
+
free_dma(CH_PPI);
free_irq(info->irq, info);
@@ -612,7 +604,6 @@ static int bfin_t350mcqb_remove(struct platform_device *pdev)
dma_free_coherent(NULL, fbinfo->fix.smem_len, info->fb_buffer,
info->dma_handle);
- kfree(fbinfo->pseudo_palette);
fb_dealloc_cmap(&fbinfo->cmap);
#ifndef NO_BL_SUPPORT
@@ -620,10 +611,11 @@ static int bfin_t350mcqb_remove(struct platform_device *pdev)
backlight_device_unregister(bl_dev);
#endif
- unregister_framebuffer(fbinfo);
-
bfin_t350mcqb_request_ports(0);
+ platform_set_drvdata(pdev, NULL);
+ framebuffer_release(fbinfo);
+
printk(KERN_INFO DRIVER_NAME ": Unregister LCD driver.\n");
return 0;
diff --git a/drivers/video/fb_defio.c b/drivers/video/fb_defio.c
index 0f8cfb988c9..24843fdd539 100644
--- a/drivers/video/fb_defio.c
+++ b/drivers/video/fb_defio.c
@@ -4,7 +4,7 @@
* Copyright (C) 2006 Jaya Kumar
*
* This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
+ * License. See the file COPYING in the main directory of this archive
* for more details.
*/
@@ -31,7 +31,7 @@ static int fb_deferred_io_fault(struct vm_area_struct *vma,
unsigned long offset;
struct page *page;
struct fb_info *info = vma->vm_private_data;
- /* info->screen_base is in System RAM */
+ /* info->screen_base is virtual memory */
void *screen_base = (void __force *) info->screen_base;
offset = vmf->pgoff << PAGE_SHIFT;
@@ -43,6 +43,15 @@ static int fb_deferred_io_fault(struct vm_area_struct *vma,
return VM_FAULT_SIGBUS;
get_page(page);
+
+ if (vma->vm_file)
+ page->mapping = vma->vm_file->f_mapping;
+ else
+ printk(KERN_ERR "no mapping available\n");
+
+ BUG_ON(!page->mapping);
+ page->index = vmf->pgoff;
+
vmf->page = page;
return 0;
}
@@ -138,11 +147,20 @@ EXPORT_SYMBOL_GPL(fb_deferred_io_init);
void fb_deferred_io_cleanup(struct fb_info *info)
{
+ void *screen_base = (void __force *) info->screen_base;
struct fb_deferred_io *fbdefio = info->fbdefio;
+ struct page *page;
+ int i;
BUG_ON(!fbdefio);
cancel_delayed_work(&info->deferred_work);
flush_scheduled_work();
+
+ /* clear out the mapping that we setup */
+ for (i = 0 ; i < info->fix.smem_len; i += PAGE_SIZE) {
+ page = vmalloc_to_page(screen_base + i);
+ page->mapping = NULL;
+ }
}
EXPORT_SYMBOL_GPL(fb_deferred_io_cleanup);
diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c
index 1d13dd099af..a24e680d2b9 100644
--- a/drivers/video/i810/i810_main.c
+++ b/drivers/video/i810/i810_main.c
@@ -1476,7 +1476,7 @@ static int i810fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
struct i810fb_par *par = info->par;
u8 __iomem *mmio = par->mmio_start_virtual;
- if (!(par->dev_flags & LOCKUP))
+ if (par->dev_flags & LOCKUP)
return -ENXIO;
if (cursor->image.width > 64 || cursor->image.height > 64)
diff --git a/drivers/video/metronomefb.c b/drivers/video/metronomefb.c
new file mode 100644
index 00000000000..e9a89fd8275
--- /dev/null
+++ b/drivers/video/metronomefb.c
@@ -0,0 +1,999 @@
+/*
+ * linux/drivers/video/metronomefb.c -- FB driver for Metronome controller
+ *
+ * Copyright (C) 2008, Jaya Kumar
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
+ *
+ * This work was made possible by help and equipment support from E-Ink
+ * Corporation. http://support.eink.com/community
+ *
+ * This driver is written to be used with the Metronome display controller.
+ * It was tested with an E-Ink 800x600 Vizplex EPD on a Gumstix Connex board
+ * using the Lyre interface board.
+ *
+ * General notes:
+ * - User must set metronomefb_enable=1 to enable it.
+ * - See Documentation/fb/metronomefb.txt for how metronome works.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/list.h>
+#include <linux/firmware.h>
+#include <linux/dma-mapping.h>
+#include <linux/uaccess.h>
+#include <linux/irq.h>
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/unaligned.h>
+
+#define DEBUG 1
+#ifdef DEBUG
+#define DPRINTK(f, a...) printk(KERN_DEBUG "%s: " f, __func__ , ## a)
+#else
+#define DPRINTK(f, a...)
+#endif
+
+
+/* Display specific information */
+#define DPY_W 832
+#define DPY_H 622
+
+struct metromem_desc {
+ u32 mFDADR0;
+ u32 mFSADR0;
+ u32 mFIDR0;
+ u32 mLDCMD0;
+};
+
+struct metromem_cmd {
+ u16 opcode;
+ u16 args[((64-2)/2)];
+ u16 csum;
+};
+
+struct metronomefb_par {
+ unsigned char *metromem;
+ struct metromem_desc *metromem_desc;
+ struct metromem_cmd *metromem_cmd;
+ unsigned char *metromem_wfm;
+ unsigned char *metromem_img;
+ u16 *metromem_img_csum;
+ u16 *csum_table;
+ int metromemsize;
+ dma_addr_t metromem_dma;
+ dma_addr_t metromem_desc_dma;
+ struct fb_info *info;
+ wait_queue_head_t waitq;
+ u8 frame_count;
+};
+
+/* frame differs from image. frame includes non-visible pixels */
+struct epd_frame {
+ int fw; /* frame width */
+ int fh; /* frame height */
+};
+
+static struct epd_frame epd_frame_table[] = {
+ {
+ .fw = 832,
+ .fh = 622
+ },
+};
+
+static struct fb_fix_screeninfo metronomefb_fix __devinitdata = {
+ .id = "metronomefb",
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_STATIC_PSEUDOCOLOR,
+ .xpanstep = 0,
+ .ypanstep = 0,
+ .ywrapstep = 0,
+ .line_length = DPY_W,
+ .accel = FB_ACCEL_NONE,
+};
+
+static struct fb_var_screeninfo metronomefb_var __devinitdata = {
+ .xres = DPY_W,
+ .yres = DPY_H,
+ .xres_virtual = DPY_W,
+ .yres_virtual = DPY_H,
+ .bits_per_pixel = 8,
+ .grayscale = 1,
+ .nonstd = 1,
+ .red = { 4, 3, 0 },
+ .green = { 0, 0, 0 },
+ .blue = { 0, 0, 0 },
+ .transp = { 0, 0, 0 },
+};
+
+static unsigned int metronomefb_enable;
+
+struct waveform_hdr {
+ u8 stuff[32];
+
+ u8 wmta[3];
+ u8 fvsn;
+
+ u8 luts;
+ u8 mc;
+ u8 trc;
+ u8 stuff3;
+
+ u8 endb;
+ u8 swtb;
+ u8 stuff2a[2];
+
+ u8 stuff2b[3];
+ u8 wfm_cs;
+} __attribute__ ((packed));
+
+/* main metronomefb functions */
+static u8 calc_cksum(int start, int end, u8 *mem)
+{
+ u8 tmp = 0;
+ int i;
+
+ for (i = start; i < end; i++)
+ tmp += mem[i];
+
+ return tmp;
+}
+
+static u16 calc_img_cksum(u16 *start, int length)
+{
+ u16 tmp = 0;
+
+ while (length--)
+ tmp += *start++;
+
+ return tmp;
+}
+
+/* here we decode the incoming waveform file and populate metromem */
+#define EXP_WFORM_SIZE 47001
+static int load_waveform(u8 *mem, size_t size, u8 *metromem, int m, int t,
+ u8 *frame_count)
+{
+ int tta;
+ int wmta;
+ int trn = 0;
+ int i;
+ unsigned char v;
+ u8 cksum;
+ int cksum_idx;
+ int wfm_idx, owfm_idx;
+ int mem_idx = 0;
+ struct waveform_hdr *wfm_hdr;
+
+ if (size != EXP_WFORM_SIZE) {
+ printk(KERN_ERR "Error: unexpected size %d != %d\n", size,
+ EXP_WFORM_SIZE);
+ return -EINVAL;
+ }
+
+ wfm_hdr = (struct waveform_hdr *) mem;
+
+ if (wfm_hdr->fvsn != 1) {
+ printk(KERN_ERR "Error: bad fvsn %x\n", wfm_hdr->fvsn);
+ return -EINVAL;
+ }
+ if (wfm_hdr->luts != 0) {
+ printk(KERN_ERR "Error: bad luts %x\n", wfm_hdr->luts);
+ return -EINVAL;
+ }
+ cksum = calc_cksum(32, 47, mem);
+ if (cksum != wfm_hdr->wfm_cs) {
+ printk(KERN_ERR "Error: bad cksum %x != %x\n", cksum,
+ wfm_hdr->wfm_cs);
+ return -EINVAL;
+ }
+ wfm_hdr->mc += 1;
+ wfm_hdr->trc += 1;
+ for (i = 0; i < 5; i++) {
+ if (*(wfm_hdr->stuff2a + i) != 0) {
+ printk(KERN_ERR "Error: unexpected value in padding\n");
+ return -EINVAL;
+ }
+ }
+
+ /* calculating trn. trn is something used to index into
+ the waveform. presumably selecting the right one for the
+ desired temperature. it works out the offset of the first
+ v that exceeds the specified temperature */
+ if ((sizeof(*wfm_hdr) + wfm_hdr->trc) > size)
+ return -EINVAL;
+
+ for (i = sizeof(*wfm_hdr); i <= sizeof(*wfm_hdr) + wfm_hdr->trc; i++) {
+ if (mem[i] > t) {
+ trn = i - sizeof(*wfm_hdr) - 1;
+ break;
+ }
+ }
+
+ /* check temperature range table checksum */
+ cksum_idx = sizeof(*wfm_hdr) + wfm_hdr->trc + 1;
+ if (cksum_idx > size)
+ return -EINVAL;
+ cksum = calc_cksum(sizeof(*wfm_hdr), cksum_idx, mem);
+ if (cksum != mem[cksum_idx]) {
+ printk(KERN_ERR "Error: bad temperature range table cksum"
+ " %x != %x\n", cksum, mem[cksum_idx]);
+ return -EINVAL;
+ }
+
+ /* check waveform mode table address checksum */
+ wmta = le32_to_cpu(get_unaligned((__le32 *) wfm_hdr->wmta));
+ wmta &= 0x00FFFFFF;
+ cksum_idx = wmta + m*4 + 3;
+ if (cksum_idx > size)
+ return -EINVAL;
+ cksum = calc_cksum(cksum_idx - 3, cksum_idx, mem);
+ if (cksum != mem[cksum_idx]) {
+ printk(KERN_ERR "Error: bad mode table address cksum"
+ " %x != %x\n", cksum, mem[cksum_idx]);
+ return -EINVAL;
+ }
+
+ /* check waveform temperature table address checksum */
+ tta = le32_to_cpu(get_unaligned((int *) (mem + wmta + m*4)));
+ tta &= 0x00FFFFFF;
+ cksum_idx = tta + trn*4 + 3;
+ if (cksum_idx > size)
+ return -EINVAL;
+ cksum = calc_cksum(cksum_idx - 3, cksum_idx, mem);
+ if (cksum != mem[cksum_idx]) {
+ printk(KERN_ERR "Error: bad temperature table address cksum"
+ " %x != %x\n", cksum, mem[cksum_idx]);
+ return -EINVAL;
+ }
+
+ /* here we do the real work of putting the waveform into the
+ metromem buffer. this does runlength decoding of the waveform */
+ wfm_idx = le32_to_cpu(get_unaligned((__le32 *) (mem + tta + trn*4)));
+ wfm_idx &= 0x00FFFFFF;
+ owfm_idx = wfm_idx;
+ if (wfm_idx > size)
+ return -EINVAL;
+ while (wfm_idx < size) {
+ unsigned char rl;
+ v = mem[wfm_idx++];
+ if (v == wfm_hdr->swtb) {
+ while (((v = mem[wfm_idx++]) != wfm_hdr->swtb) &&
+ wfm_idx < size)
+ metromem[mem_idx++] = v;
+
+ continue;
+ }
+
+ if (v == wfm_hdr->endb)
+ break;
+
+ rl = mem[wfm_idx++];
+ for (i = 0; i <= rl; i++)
+ metromem[mem_idx++] = v;
+ }
+
+ cksum_idx = wfm_idx;
+ if (cksum_idx > size)
+ return -EINVAL;
+ cksum = calc_cksum(owfm_idx, cksum_idx, mem);
+ if (cksum != mem[cksum_idx]) {
+ printk(KERN_ERR "Error: bad waveform data cksum"
+ " %x != %x\n", cksum, mem[cksum_idx]);
+ return -EINVAL;
+ }
+ *frame_count = (mem_idx/64);
+
+ return 0;
+}
+
+/* register offsets for gpio control */
+#define LED_GPIO_PIN 51
+#define STDBY_GPIO_PIN 48
+#define RST_GPIO_PIN 49
+#define RDY_GPIO_PIN 32
+#define ERR_GPIO_PIN 17
+#define PCBPWR_GPIO_PIN 16
+
+#define AF_SEL_GPIO_N 0x3
+#define GAFR0_U_OFFSET(pin) ((pin - 16) * 2)
+#define GAFR1_L_OFFSET(pin) ((pin - 32) * 2)
+#define GAFR1_U_OFFSET(pin) ((pin - 48) * 2)
+#define GPDR1_OFFSET(pin) (pin - 32)
+#define GPCR1_OFFSET(pin) (pin - 32)
+#define GPSR1_OFFSET(pin) (pin - 32)
+#define GPCR0_OFFSET(pin) (pin)
+#define GPSR0_OFFSET(pin) (pin)
+
+static void metronome_set_gpio_output(int pin, int val)
+{
+ u8 index;
+
+ index = pin >> 4;
+
+ switch (index) {
+ case 1:
+ if (val)
+ GPSR0 |= (1 << GPSR0_OFFSET(pin));
+ else
+ GPCR0 |= (1 << GPCR0_OFFSET(pin));
+ break;
+ case 2:
+ break;
+ case 3:
+ if (val)
+ GPSR1 |= (1 << GPSR1_OFFSET(pin));
+ else
+ GPCR1 |= (1 << GPCR1_OFFSET(pin));
+ break;
+ default:
+ printk(KERN_ERR "unimplemented\n");
+ }
+}
+
+static void __devinit metronome_init_gpio_pin(int pin, int dir)
+{
+ u8 index;
+ /* dir 0 is output, 1 is input
+ - do 2 things here:
+ - set gpio alternate function to standard gpio
+ - set gpio direction to input or output */
+
+ index = pin >> 4;
+ switch (index) {
+ case 1:
+ GAFR0_U &= ~(AF_SEL_GPIO_N << GAFR0_U_OFFSET(pin));
+
+ if (dir)
+ GPDR0 &= ~(1 << pin);
+ else
+ GPDR0 |= (1 << pin);
+ break;
+ case 2:
+ GAFR1_L &= ~(AF_SEL_GPIO_N << GAFR1_L_OFFSET(pin));
+
+ if (dir)
+ GPDR1 &= ~(1 << GPDR1_OFFSET(pin));
+ else
+ GPDR1 |= (1 << GPDR1_OFFSET(pin));
+ break;
+ case 3:
+ GAFR1_U &= ~(AF_SEL_GPIO_N << GAFR1_U_OFFSET(pin));
+
+ if (dir)
+ GPDR1 &= ~(1 << GPDR1_OFFSET(pin));
+ else
+ GPDR1 |= (1 << GPDR1_OFFSET(pin));
+ break;
+ default:
+ printk(KERN_ERR "unimplemented\n");
+ }
+}
+
+static void __devinit metronome_init_gpio_regs(void)
+{
+ metronome_init_gpio_pin(LED_GPIO_PIN, 0);
+ metronome_set_gpio_output(LED_GPIO_PIN, 0);
+
+ metronome_init_gpio_pin(STDBY_GPIO_PIN, 0);
+ metronome_set_gpio_output(STDBY_GPIO_PIN, 0);
+
+ metronome_init_gpio_pin(RST_GPIO_PIN, 0);
+ metronome_set_gpio_output(RST_GPIO_PIN, 0);
+
+ metronome_init_gpio_pin(RDY_GPIO_PIN, 1);
+
+ metronome_init_gpio_pin(ERR_GPIO_PIN, 1);
+
+ metronome_init_gpio_pin(PCBPWR_GPIO_PIN, 0);
+ metronome_set_gpio_output(PCBPWR_GPIO_PIN, 0);
+}
+
+static void metronome_disable_lcd_controller(struct metronomefb_par *par)
+{
+ LCSR = 0xffffffff; /* Clear LCD Status Register */
+ LCCR0 |= LCCR0_DIS; /* Disable LCD Controller */
+
+ /* we reset and just wait for things to settle */
+ msleep(200);
+}
+
+static void metronome_enable_lcd_controller(struct metronomefb_par *par)
+{
+ LCSR = 0xffffffff;
+ FDADR0 = par->metromem_desc_dma;
+ LCCR0 |= LCCR0_ENB;
+}
+
+static void __devinit metronome_init_lcdc_regs(struct metronomefb_par *par)
+{
+ /* here we do:
+ - disable the lcd controller
+ - setup lcd control registers
+ - setup dma descriptor
+ - reenable lcd controller
+ */
+
+ /* disable the lcd controller */
+ metronome_disable_lcd_controller(par);
+
+ /* setup lcd control registers */
+ LCCR0 = LCCR0_LDM | LCCR0_SFM | LCCR0_IUM | LCCR0_EFM | LCCR0_PAS
+ | LCCR0_QDM | LCCR0_BM | LCCR0_OUM;
+
+ LCCR1 = (epd_frame_table[0].fw/2 - 1) /* pixels per line */
+ | (27 << 10) /* hsync pulse width - 1 */
+ | (33 << 16) /* eol pixel count */
+ | (33 << 24); /* bol pixel count */
+
+ LCCR2 = (epd_frame_table[0].fh - 1) /* lines per panel */
+ | (24 << 10) /* vsync pulse width - 1 */
+ | (2 << 16) /* eof pixel count */
+ | (0 << 24); /* bof pixel count */
+
+ LCCR3 = 2 /* pixel clock divisor */
+ | (24 << 8) /* AC Bias pin freq */
+ | LCCR3_16BPP /* BPP */
+ | LCCR3_PCP; /* PCP falling edge */
+
+ /* setup dma descriptor */
+ par->metromem_desc->mFDADR0 = par->metromem_desc_dma;
+ par->metromem_desc->mFSADR0 = par->metromem_dma;
+ par->metromem_desc->mFIDR0 = 0;
+ par->metromem_desc->mLDCMD0 = epd_frame_table[0].fw
+ * epd_frame_table[0].fh;
+ /* reenable lcd controller */
+ metronome_enable_lcd_controller(par);
+}
+
+static int metronome_display_cmd(struct metronomefb_par *par)
+{
+ int i;
+ u16 cs;
+ u16 opcode;
+ static u8 borderval;
+ u8 *ptr;
+
+ /* setup display command
+ we can't immediately set the opcode since the controller
+ will try parse the command before we've set it all up
+ so we just set cs here and set the opcode at the end */
+
+ ptr = par->metromem;
+
+ if (par->metromem_cmd->opcode == 0xCC40)
+ opcode = cs = 0xCC41;
+ else
+ opcode = cs = 0xCC40;
+
+ /* set the args ( 2 bytes ) for display */
+ i = 0;
+ par->metromem_cmd->args[i] = 1 << 3 /* border update */
+ | ((borderval++ % 4) & 0x0F) << 4
+ | (par->frame_count - 1) << 8;
+ cs += par->metromem_cmd->args[i++];
+
+ /* the rest are 0 */
+ memset((u8 *) (par->metromem_cmd->args + i), 0, (32-i)*2);
+
+ par->metromem_cmd->csum = cs;
+ par->metromem_cmd->opcode = opcode; /* display cmd */
+
+ i = wait_event_interruptible_timeout(par->waitq, (GPLR1 & 0x01), HZ);
+ return i;
+}
+
+static int __devinit metronome_powerup_cmd(struct metronomefb_par *par)
+{
+ int i;
+ u16 cs;
+
+ /* setup power up command */
+ par->metromem_cmd->opcode = 0x1234; /* pwr up pseudo cmd */
+ cs = par->metromem_cmd->opcode;
+
+ /* set pwr1,2,3 to 1024 */
+ for (i = 0; i < 3; i++) {
+ par->metromem_cmd->args[i] = 1024;
+ cs += par->metromem_cmd->args[i];
+ }
+
+ /* the rest are 0 */
+ memset((u8 *) (par->metromem_cmd->args + i), 0, (32-i)*2);
+
+ par->metromem_cmd->csum = cs;
+
+ msleep(1);
+ metronome_set_gpio_output(RST_GPIO_PIN, 1);
+
+ msleep(1);
+ metronome_set_gpio_output(STDBY_GPIO_PIN, 1);
+
+ i = wait_event_timeout(par->waitq, (GPLR1 & 0x01), HZ);
+ return i;
+}
+
+static int __devinit metronome_config_cmd(struct metronomefb_par *par)
+{
+ int i;
+ u16 cs;
+
+ /* setup config command
+ we can't immediately set the opcode since the controller
+ will try parse the command before we've set it all up
+ so we just set cs here and set the opcode at the end */
+
+ cs = 0xCC10;
+
+ /* set the 12 args ( 8 bytes ) for config. see spec for meanings */
+ i = 0;
+ par->metromem_cmd->args[i] = 15 /* sdlew */
+ | 2 << 8 /* sdosz */
+ | 0 << 11 /* sdor */
+ | 0 << 12 /* sdces */
+ | 0 << 15; /* sdcer */
+ cs += par->metromem_cmd->args[i++];
+
+ par->metromem_cmd->args[i] = 42 /* gdspl */
+ | 1 << 8 /* gdr1 */
+ | 1 << 9 /* sdshr */
+ | 0 << 15; /* gdspp */
+ cs += par->metromem_cmd->args[i++];
+
+ par->metromem_cmd->args[i] = 18 /* gdspw */
+ | 0 << 15; /* dispc */
+ cs += par->metromem_cmd->args[i++];
+
+ par->metromem_cmd->args[i] = 599 /* vdlc */
+ | 0 << 11 /* dsi */
+ | 0 << 12; /* dsic */
+ cs += par->metromem_cmd->args[i++];
+
+ /* the rest are 0 */
+ memset((u8 *) (par->metromem_cmd->args + i), 0, (32-i)*2);
+
+ par->metromem_cmd->csum = cs;
+ par->metromem_cmd->opcode = 0xCC10; /* config cmd */
+
+ i = wait_event_timeout(par->waitq, (GPLR1 & 0x01), HZ);
+ return i;
+}
+
+static int __devinit metronome_init_cmd(struct metronomefb_par *par)
+{
+ int i;
+ u16 cs;
+
+ /* setup init command
+ we can't immediately set the opcode since the controller
+ will try parse the command before we've set it all up
+ so we just set cs here and set the opcode at the end */
+
+ cs = 0xCC20;
+
+ /* set the args ( 2 bytes ) for init */
+ i = 0;
+ par->metromem_cmd->args[i] = 0;
+ cs += par->metromem_cmd->args[i++];
+
+ /* the rest are 0 */
+ memset((u8 *) (par->metromem_cmd->args + i), 0, (32-i)*2);
+
+ par->metromem_cmd->csum = cs;
+ par->metromem_cmd->opcode = 0xCC20; /* init cmd */
+
+ i = wait_event_timeout(par->waitq, (GPLR1 & 0x01), HZ);
+ return i;
+}
+
+static int __devinit metronome_init_regs(struct metronomefb_par *par)
+{
+ int res;
+
+ metronome_init_gpio_regs();
+ metronome_init_lcdc_regs(par);
+
+ res = metronome_powerup_cmd(par);
+ if (res)
+ return res;
+
+ res = metronome_config_cmd(par);
+ if (res)
+ return res;
+
+ res = metronome_init_cmd(par);
+ if (res)
+ return res;
+
+ return res;
+}
+
+static void metronomefb_dpy_update(struct metronomefb_par *par)
+{
+ u16 cksum;
+ unsigned char *buf = (unsigned char __force *)par->info->screen_base;
+
+ /* copy from vm to metromem */
+ memcpy(par->metromem_img, buf, DPY_W*DPY_H);
+
+ cksum = calc_img_cksum((u16 *) par->metromem_img,
+ (epd_frame_table[0].fw * DPY_H)/2);
+ *((u16 *) (par->metromem_img) +
+ (epd_frame_table[0].fw * DPY_H)/2) = cksum;
+ metronome_display_cmd(par);
+}
+
+static u16 metronomefb_dpy_update_page(struct metronomefb_par *par, int index)
+{
+ int i;
+ u16 csum = 0;
+ u16 *buf = (u16 __force *) (par->info->screen_base + index);
+ u16 *img = (u16 *) (par->metromem_img + index);
+
+ /* swizzle from vm to metromem and recalc cksum at the same time*/
+ for (i = 0; i < PAGE_SIZE/2; i++) {
+ *(img + i) = (buf[i] << 5) & 0xE0E0;
+ csum += *(img + i);
+ }
+ return csum;
+}
+
+/* this is called back from the deferred io workqueue */
+static void metronomefb_dpy_deferred_io(struct fb_info *info,
+ struct list_head *pagelist)
+{
+ u16 cksum;
+ struct page *cur;
+ struct fb_deferred_io *fbdefio = info->fbdefio;
+ struct metronomefb_par *par = info->par;
+
+ /* walk the written page list and swizzle the data */
+ list_for_each_entry(cur, &fbdefio->pagelist, lru) {
+ cksum = metronomefb_dpy_update_page(par,
+ (cur->index << PAGE_SHIFT));
+ par->metromem_img_csum -= par->csum_table[cur->index];
+ par->csum_table[cur->index] = cksum;
+ par->metromem_img_csum += cksum;
+ }
+
+ metronome_display_cmd(par);
+}
+
+static void metronomefb_fillrect(struct fb_info *info,
+ const struct fb_fillrect *rect)
+{
+ struct metronomefb_par *par = info->par;
+
+ cfb_fillrect(info, rect);
+ metronomefb_dpy_update(par);
+}
+
+static void metronomefb_copyarea(struct fb_info *info,
+ const struct fb_copyarea *area)
+{
+ struct metronomefb_par *par = info->par;
+
+ cfb_copyarea(info, area);
+ metronomefb_dpy_update(par);
+}
+
+static void metronomefb_imageblit(struct fb_info *info,
+ const struct fb_image *image)
+{
+ struct metronomefb_par *par = info->par;
+
+ cfb_imageblit(info, image);
+ metronomefb_dpy_update(par);
+}
+
+/*
+ * this is the slow path from userspace. they can seek and write to
+ * the fb. it is based on fb_sys_write
+ */
+static ssize_t metronomefb_write(struct fb_info *info, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct metronomefb_par *par = info->par;
+ unsigned long p = *ppos;
+ void *dst;
+ int err = 0;
+ unsigned long total_size;
+
+ if (info->state != FBINFO_STATE_RUNNING)
+ return -EPERM;
+
+ total_size = info->fix.smem_len;
+
+ if (p > total_size)
+ return -EFBIG;
+
+ if (count > total_size) {
+ err = -EFBIG;
+ count = total_size;
+ }
+
+ if (count + p > total_size) {
+ if (!err)
+ err = -ENOSPC;
+
+ count = total_size - p;
+ }
+
+ dst = (void __force *) (info->screen_base + p);
+
+ if (copy_from_user(dst, buf, count))
+ err = -EFAULT;
+
+ if (!err)
+ *ppos += count;
+
+ metronomefb_dpy_update(par);
+
+ return (err) ? err : count;
+}
+
+static struct fb_ops metronomefb_ops = {
+ .owner = THIS_MODULE,
+ .fb_write = metronomefb_write,
+ .fb_fillrect = metronomefb_fillrect,
+ .fb_copyarea = metronomefb_copyarea,
+ .fb_imageblit = metronomefb_imageblit,
+};
+
+static struct fb_deferred_io metronomefb_defio = {
+ .delay = HZ,
+ .deferred_io = metronomefb_dpy_deferred_io,
+};
+
+static irqreturn_t metronome_handle_irq(int irq, void *dev_id)
+{
+ struct fb_info *info = dev_id;
+ struct metronomefb_par *par = info->par;
+
+ wake_up_interruptible(&par->waitq);
+ return IRQ_HANDLED;
+}
+
+static int __devinit metronomefb_probe(struct platform_device *dev)
+{
+ struct fb_info *info;
+ int retval = -ENOMEM;
+ int videomemorysize;
+ unsigned char *videomemory;
+ struct metronomefb_par *par;
+ const struct firmware *fw_entry;
+ int cmd_size, wfm_size, img_size, padding_size, totalsize;
+ int i;
+
+ /* we have two blocks of memory.
+ info->screen_base which is vm, and is the fb used by apps.
+ par->metromem which is physically contiguous memory and
+ contains the display controller commands, waveform,
+ processed image data and padding. this is the data pulled
+ by the pxa255's LCD controller and pushed to Metronome */
+
+ videomemorysize = (DPY_W*DPY_H);
+ videomemory = vmalloc(videomemorysize);
+ if (!videomemory)
+ return retval;
+
+ memset(videomemory, 0, videomemorysize);
+
+ info = framebuffer_alloc(sizeof(struct metronomefb_par), &dev->dev);
+ if (!info)
+ goto err_vfree;
+
+ info->screen_base = (char __iomem *) videomemory;
+ info->fbops = &metronomefb_ops;
+
+ info->var = metronomefb_var;
+ info->fix = metronomefb_fix;
+ info->fix.smem_len = videomemorysize;
+ par = info->par;
+ par->info = info;
+ init_waitqueue_head(&par->waitq);
+
+ /* this table caches per page csum values. */
+ par->csum_table = vmalloc(videomemorysize/PAGE_SIZE);
+ if (!par->csum_table)
+ goto err_csum_table;
+
+ /* the metromem buffer is divided as follows:
+ command | CRC | padding
+ 16kb waveform data | CRC | padding
+ image data | CRC
+ and an extra 256 bytes for dma descriptors
+ eg: IW=832 IH=622 WS=128
+ */
+
+ cmd_size = 1 * epd_frame_table[0].fw;
+ wfm_size = ((16*1024 + 2 + epd_frame_table[0].fw - 1)
+ / epd_frame_table[0].fw) * epd_frame_table[0].fw;
+ img_size = epd_frame_table[0].fh * epd_frame_table[0].fw;
+ padding_size = 4 * epd_frame_table[0].fw;
+ totalsize = cmd_size + wfm_size + img_size + padding_size;
+ par->metromemsize = PAGE_ALIGN(totalsize + 256);
+ DPRINTK("desired memory size = %d\n", par->metromemsize);
+ dev->dev.coherent_dma_mask = 0xffffffffull;
+ par->metromem = dma_alloc_writecombine(&dev->dev, par->metromemsize,
+ &par->metromem_dma, GFP_KERNEL);
+ if (!par->metromem) {
+ printk(KERN_ERR
+ "metronomefb: unable to allocate dma buffer\n");
+ goto err_vfree;
+ }
+
+ info->fix.smem_start = par->metromem_dma;
+ par->metromem_cmd = (struct metromem_cmd *) par->metromem;
+ par->metromem_wfm = par->metromem + cmd_size;
+ par->metromem_img = par->metromem + cmd_size + wfm_size;
+ par->metromem_img_csum = (u16 *) (par->metromem_img +
+ (epd_frame_table[0].fw * DPY_H));
+ DPRINTK("img offset=0x%x\n", cmd_size + wfm_size);
+ par->metromem_desc = (struct metromem_desc *) (par->metromem + cmd_size
+ + wfm_size + img_size + padding_size);
+ par->metromem_desc_dma = par->metromem_dma + cmd_size + wfm_size
+ + img_size + padding_size;
+
+ /* load the waveform in. assume mode 3, temp 31 for now */
+ /* a) request the waveform file from userspace
+ b) process waveform and decode into metromem */
+
+ retval = request_firmware(&fw_entry, "waveform.wbf", &dev->dev);
+ if (retval < 0) {
+ printk(KERN_ERR "metronomefb: couldn't get waveform\n");
+ goto err_dma_free;
+ }
+
+ retval = load_waveform((u8 *) fw_entry->data, fw_entry->size,
+ par->metromem_wfm, 3, 31, &par->frame_count);
+ if (retval < 0) {
+ printk(KERN_ERR "metronomefb: couldn't process waveform\n");
+ goto err_ld_wfm;
+ }
+ release_firmware(fw_entry);
+
+ retval = request_irq(IRQ_GPIO(RDY_GPIO_PIN), metronome_handle_irq,
+ IRQF_DISABLED, "Metronome", info);
+ if (retval) {
+ dev_err(&dev->dev, "request_irq failed: %d\n", retval);
+ goto err_ld_wfm;
+ }
+ set_irq_type(IRQ_GPIO(RDY_GPIO_PIN), IRQT_FALLING);
+
+ retval = metronome_init_regs(par);
+ if (retval < 0)
+ goto err_free_irq;
+
+ info->flags = FBINFO_FLAG_DEFAULT;
+
+ info->fbdefio = &metronomefb_defio;
+ fb_deferred_io_init(info);
+
+ retval = fb_alloc_cmap(&info->cmap, 8, 0);
+ if (retval < 0) {
+ printk(KERN_ERR "Failed to allocate colormap\n");
+ goto err_fb_rel;
+ }
+
+ /* set cmap */
+ for (i = 0; i < 8; i++)
+ info->cmap.red[i] = (((2*i)+1)*(0xFFFF))/16;
+ memcpy(info->cmap.green, info->cmap.red, sizeof(u16)*8);
+ memcpy(info->cmap.blue, info->cmap.red, sizeof(u16)*8);
+
+ retval = register_framebuffer(info);
+ if (retval < 0)
+ goto err_cmap;
+
+ platform_set_drvdata(dev, info);
+
+ printk(KERN_INFO
+ "fb%d: Metronome frame buffer device, using %dK of video"
+ " memory\n", info->node, videomemorysize >> 10);
+
+ return 0;
+
+err_cmap:
+ fb_dealloc_cmap(&info->cmap);
+err_fb_rel:
+ framebuffer_release(info);
+err_free_irq:
+ free_irq(IRQ_GPIO(RDY_GPIO_PIN), info);
+err_ld_wfm:
+ release_firmware(fw_entry);
+err_dma_free:
+ dma_free_writecombine(&dev->dev, par->metromemsize, par->metromem,
+ par->metromem_dma);
+err_csum_table:
+ vfree(par->csum_table);
+err_vfree:
+ vfree(videomemory);
+ return retval;
+}
+
+static int __devexit metronomefb_remove(struct platform_device *dev)
+{
+ struct fb_info *info = platform_get_drvdata(dev);
+
+ if (info) {
+ struct metronomefb_par *par = info->par;
+ fb_deferred_io_cleanup(info);
+ dma_free_writecombine(&dev->dev, par->metromemsize,
+ par->metromem, par->metromem_dma);
+ fb_dealloc_cmap(&info->cmap);
+ vfree(par->csum_table);
+ unregister_framebuffer(info);
+ vfree((void __force *)info->screen_base);
+ free_irq(IRQ_GPIO(RDY_GPIO_PIN), info);
+ framebuffer_release(info);
+ }
+ return 0;
+}
+
+static struct platform_driver metronomefb_driver = {
+ .probe = metronomefb_probe,
+ .remove = metronomefb_remove,
+ .driver = {
+ .name = "metronomefb",
+ },
+};
+
+static struct platform_device *metronomefb_device;
+
+static int __init metronomefb_init(void)
+{
+ int ret;
+
+ if (!metronomefb_enable) {
+ printk(KERN_ERR
+ "Use metronomefb_enable to enable the device\n");
+ return -ENXIO;
+ }
+
+ ret = platform_driver_register(&metronomefb_driver);
+ if (!ret) {
+ metronomefb_device = platform_device_alloc("metronomefb", 0);
+ if (metronomefb_device)
+ ret = platform_device_add(metronomefb_device);
+ else
+ ret = -ENOMEM;
+
+ if (ret) {
+ platform_device_put(metronomefb_device);
+ platform_driver_unregister(&metronomefb_driver);
+ }
+ }
+ return ret;
+
+}
+
+static void __exit metronomefb_exit(void)
+{
+ platform_device_unregister(metronomefb_device);
+ platform_driver_unregister(&metronomefb_driver);
+}
+
+module_param(metronomefb_enable, uint, 0);
+MODULE_PARM_DESC(metronomefb_enable, "Enable communication with Metronome");
+
+module_init(metronomefb_init);
+module_exit(metronomefb_exit);
+
+MODULE_DESCRIPTION("fbdev driver for Metronome controller");
+MODULE_AUTHOR("Jaya Kumar");
+MODULE_LICENSE("GPL");
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 59a8f73dec7..c0df924766a 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -37,7 +37,7 @@ struct virtio_pci_device
struct pci_dev *pci_dev;
/* the IO mapping for the PCI config space */
- void *ioaddr;
+ void __iomem *ioaddr;
/* a list of queues so we can dispatch IRQs */
spinlock_t lock;
@@ -111,7 +111,7 @@ static void vp_get(struct virtio_device *vdev, unsigned offset,
void *buf, unsigned len)
{
struct virtio_pci_device *vp_dev = to_vp_device(vdev);
- void *ioaddr = vp_dev->ioaddr + VIRTIO_PCI_CONFIG + offset;
+ void __iomem *ioaddr = vp_dev->ioaddr + VIRTIO_PCI_CONFIG + offset;
u8 *ptr = buf;
int i;
@@ -125,7 +125,7 @@ static void vp_set(struct virtio_device *vdev, unsigned offset,
const void *buf, unsigned len)
{
struct virtio_pci_device *vp_dev = to_vp_device(vdev);
- void *ioaddr = vp_dev->ioaddr + VIRTIO_PCI_CONFIG + offset;
+ void __iomem *ioaddr = vp_dev->ioaddr + VIRTIO_PCI_CONFIG + offset;
const u8 *ptr = buf;
int i;
@@ -388,6 +388,7 @@ static void __devexit virtio_pci_remove(struct pci_dev *pci_dev)
{
struct virtio_pci_device *vp_dev = pci_get_drvdata(pci_dev);
+ unregister_virtio_device(&vp_dev->vdev);
free_irq(pci_dev->irq, vp_dev);
pci_set_drvdata(pci_dev, NULL);
pci_iounmap(pci_dev, vp_dev->ioaddr);
diff --git a/drivers/watchdog/it8712f_wdt.c b/drivers/watchdog/it8712f_wdt.c
index 1efcad3b6fc..ca90c519259 100644
--- a/drivers/watchdog/it8712f_wdt.c
+++ b/drivers/watchdog/it8712f_wdt.c
@@ -111,15 +111,6 @@ superio_inw(int reg)
return val;
}
-static void
-superio_outw(int val, int reg)
-{
- outb(reg++, REG);
- outb((val >> 8) & 0xff, VAL);
- outb(reg, REG);
- outb(val & 0xff, VAL);
-}
-
static inline void
superio_select(int ldn)
{
@@ -170,9 +161,8 @@ it8712f_wdt_update_margin(void)
superio_outb(config, WDT_CONFIG);
if (revision >= 0x08)
- superio_outw(units, WDT_TIMEOUT);
- else
- superio_outb(units, WDT_TIMEOUT);
+ superio_outb(units >> 8, WDT_TIMEOUT + 1);
+ superio_outb(units, WDT_TIMEOUT);
}
static int
diff --git a/fs/afs/cell.c b/fs/afs/cell.c
index 970d38f3056..584bb0f9c36 100644
--- a/fs/afs/cell.c
+++ b/fs/afs/cell.c
@@ -127,14 +127,21 @@ struct afs_cell *afs_cell_create(const char *name, char *vllist)
_enter("%s,%s", name, vllist);
+ down_write(&afs_cells_sem);
+ read_lock(&afs_cells_lock);
+ list_for_each_entry(cell, &afs_cells, link) {
+ if (strcasecmp(cell->name, name) == 0)
+ goto duplicate_name;
+ }
+ read_unlock(&afs_cells_lock);
+
cell = afs_cell_alloc(name, vllist);
if (IS_ERR(cell)) {
_leave(" = %ld", PTR_ERR(cell));
+ up_write(&afs_cells_sem);
return cell;
}
- down_write(&afs_cells_sem);
-
/* add a proc directory for this cell */
ret = afs_proc_cell_setup(cell);
if (ret < 0)
@@ -167,6 +174,11 @@ error:
kfree(cell);
_leave(" = %d", ret);
return ERR_PTR(ret);
+
+duplicate_name:
+ read_unlock(&afs_cells_lock);
+ up_write(&afs_cells_sem);
+ return ERR_PTR(-EEXIST);
}
/*
diff --git a/fs/afs/internal.h b/fs/afs/internal.h
index 5ca3625cd39..9ba16edc0af 100644
--- a/fs/afs/internal.h
+++ b/fs/afs/internal.h
@@ -573,7 +573,6 @@ extern const struct file_operations afs_mntpt_file_operations;
extern int afs_mntpt_check_symlink(struct afs_vnode *, struct key *);
extern void afs_mntpt_kill_timer(void);
-extern void afs_umount_begin(struct vfsmount *, int);
/*
* proc.c
diff --git a/fs/afs/mntpt.c b/fs/afs/mntpt.c
index a3510b8ba3e..2f5503902c3 100644
--- a/fs/afs/mntpt.c
+++ b/fs/afs/mntpt.c
@@ -283,11 +283,3 @@ void afs_mntpt_kill_timer(void)
cancel_delayed_work(&afs_mntpt_expiry_timer);
flush_scheduled_work();
}
-
-/*
- * begin unmount by attempting to remove all automounted mountpoints we added
- */
-void afs_umount_begin(struct vfsmount *vfsmnt, int flags)
-{
- shrink_submounts(vfsmnt, &afs_vfsmounts);
-}
diff --git a/fs/afs/super.c b/fs/afs/super.c
index 36bbce45f44..4b572b801d8 100644
--- a/fs/afs/super.c
+++ b/fs/afs/super.c
@@ -50,7 +50,6 @@ static const struct super_operations afs_super_ops = {
.write_inode = afs_write_inode,
.destroy_inode = afs_destroy_inode,
.clear_inode = afs_clear_inode,
- .umount_begin = afs_umount_begin,
.put_super = afs_put_super,
.show_options = generic_show_options,
};
diff --git a/fs/aio.c b/fs/aio.c
index b74c567383b..6af92194062 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -996,6 +996,14 @@ put_rq:
/* everything turned out well, dispose of the aiocb. */
ret = __aio_put_req(ctx, iocb);
+ /*
+ * We have to order our ring_info tail store above and test
+ * of the wait list below outside the wait lock. This is
+ * like in wake_up_bit() where clearing a bit has to be
+ * ordered with the unlocked test.
+ */
+ smp_mb();
+
if (waitqueue_active(&ctx->wait))
wake_up(&ctx->wait);
diff --git a/fs/anon_inodes.c b/fs/anon_inodes.c
index 23321889d9b..f42be069e08 100644
--- a/fs/anon_inodes.c
+++ b/fs/anon_inodes.c
@@ -81,13 +81,10 @@ int anon_inode_getfd(int *pfd, struct inode **pinode, struct file **pfile,
if (IS_ERR(anon_inode_inode))
return -ENODEV;
- file = get_empty_filp();
- if (!file)
- return -ENFILE;
error = get_unused_fd();
if (error < 0)
- goto err_put_filp;
+ return error;
fd = error;
/*
@@ -114,14 +111,15 @@ int anon_inode_getfd(int *pfd, struct inode **pinode, struct file **pfile,
dentry->d_flags &= ~DCACHE_UNHASHED;
d_instantiate(dentry, anon_inode_inode);
- file->f_path.mnt = mntget(anon_inode_mnt);
- file->f_path.dentry = dentry;
+ error = -ENFILE;
+ file = alloc_file(anon_inode_mnt, dentry,
+ FMODE_READ | FMODE_WRITE, fops);
+ if (!file)
+ goto err_dput;
file->f_mapping = anon_inode_inode->i_mapping;
file->f_pos = 0;
file->f_flags = O_RDWR;
- file->f_op = fops;
- file->f_mode = FMODE_READ | FMODE_WRITE;
file->f_version = 0;
file->private_data = priv;
@@ -132,10 +130,10 @@ int anon_inode_getfd(int *pfd, struct inode **pinode, struct file **pfile,
*pfile = file;
return 0;
+err_dput:
+ dput(dentry);
err_put_unused_fd:
put_unused_fd(fd);
-err_put_filp:
- put_filp(file);
return error;
}
EXPORT_SYMBOL_GPL(anon_inode_getfd);
diff --git a/fs/bio.c b/fs/bio.c
index 3312fcc3c09..553b5b7960a 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -1194,6 +1194,8 @@ EXPORT_SYMBOL(bio_hw_segments);
EXPORT_SYMBOL(bio_add_page);
EXPORT_SYMBOL(bio_add_pc_page);
EXPORT_SYMBOL(bio_get_nr_vecs);
+EXPORT_SYMBOL(bio_map_user);
+EXPORT_SYMBOL(bio_unmap_user);
EXPORT_SYMBOL(bio_map_kern);
EXPORT_SYMBOL(bio_pair_release);
EXPORT_SYMBOL(bio_split);
diff --git a/fs/buffer.c b/fs/buffer.c
index ddfdd2c80bf..98196327ddf 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -2564,14 +2564,13 @@ int nobh_write_end(struct file *file, struct address_space *mapping,
struct inode *inode = page->mapping->host;
struct buffer_head *head = fsdata;
struct buffer_head *bh;
+ BUG_ON(fsdata != NULL && page_has_buffers(page));
- if (!PageMappedToDisk(page)) {
- if (unlikely(copied < len) && !page_has_buffers(page))
- attach_nobh_buffers(page, head);
- if (page_has_buffers(page))
- return generic_write_end(file, mapping, pos, len,
- copied, page, fsdata);
- }
+ if (unlikely(copied < len) && !page_has_buffers(page))
+ attach_nobh_buffers(page, head);
+ if (page_has_buffers(page))
+ return generic_write_end(file, mapping, pos, len,
+ copied, page, fsdata);
SetPageUptodate(page);
set_page_dirty(page);
@@ -3213,7 +3212,7 @@ static int buffer_cpu_notify(struct notifier_block *self,
}
/**
- * bh_uptodate_or_lock: Test whether the buffer is uptodate
+ * bh_uptodate_or_lock - Test whether the buffer is uptodate
* @bh: struct buffer_head
*
* Return true if the buffer is up-to-date and false,
@@ -3232,7 +3231,7 @@ int bh_uptodate_or_lock(struct buffer_head *bh)
EXPORT_SYMBOL(bh_uptodate_or_lock);
/**
- * bh_submit_read: Submit a locked buffer for reading
+ * bh_submit_read - Submit a locked buffer for reading
* @bh: struct buffer_head
*
* Returns zero on success and -EIO on error.
diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c
index 7f883825341..56c924033b7 100644
--- a/fs/cifs/cifs_dfs_ref.c
+++ b/fs/cifs/cifs_dfs_ref.c
@@ -33,7 +33,6 @@ void dfs_shrink_umount_helper(struct vfsmount *vfsmnt)
{
mark_mounts_for_expiry(&cifs_dfs_automount_list);
mark_mounts_for_expiry(&cifs_dfs_automount_list);
- shrink_submounts(vfsmnt, &cifs_dfs_automount_list);
}
/**
@@ -74,7 +73,7 @@ static char *cifs_get_share_name(const char *node_name)
pSep = memchr(UNC+2, '\\', len-2);
if (!pSep) {
cERROR(1, ("%s: no server name end in node name: %s",
- __FUNCTION__, node_name));
+ __func__, node_name));
kfree(UNC);
return NULL;
}
@@ -84,7 +83,7 @@ static char *cifs_get_share_name(const char *node_name)
pSep = memchr(UNC+(pSep-UNC), '\\', len-(pSep-UNC));
if (!pSep) {
cERROR(1, ("%s:2 cant find share name in node name: %s",
- __FUNCTION__, node_name));
+ __func__, node_name));
kfree(UNC);
return NULL;
}
@@ -127,7 +126,7 @@ static char *compose_mount_options(const char *sb_mountdata,
rc = dns_resolve_server_name_to_ip(*devname, &srvIP);
if (rc != 0) {
cERROR(1, ("%s: Failed to resolve server part of %s to IP",
- __FUNCTION__, *devname));
+ __func__, *devname));
mountdata = ERR_PTR(rc);
goto compose_mount_options_out;
}
@@ -181,8 +180,8 @@ static char *compose_mount_options(const char *sb_mountdata,
}
}
- /*cFYI(1,("%s: parent mountdata: %s", __FUNCTION__,sb_mountdata));*/
- /*cFYI(1, ("%s: submount mountdata: %s", __FUNCTION__, mountdata ));*/
+ /*cFYI(1,("%s: parent mountdata: %s", __func__,sb_mountdata));*/
+ /*cFYI(1, ("%s: submount mountdata: %s", __func__, mountdata ));*/
compose_mount_options_out:
kfree(srvIP);
@@ -302,7 +301,7 @@ cifs_dfs_follow_mountpoint(struct dentry *dentry, struct nameidata *nd)
int rc = 0;
struct vfsmount *mnt = ERR_PTR(-ENOENT);
- cFYI(1, ("in %s", __FUNCTION__));
+ cFYI(1, ("in %s", __func__));
BUG_ON(IS_ROOT(dentry));
xid = GetXid();
@@ -336,7 +335,7 @@ cifs_dfs_follow_mountpoint(struct dentry *dentry, struct nameidata *nd)
len = strlen(referrals[i].node_name);
if (len < 2) {
cERROR(1, ("%s: Net Address path too short: %s",
- __FUNCTION__, referrals[i].node_name));
+ __func__, referrals[i].node_name));
rc = -EINVAL;
goto out_err;
}
@@ -344,7 +343,7 @@ cifs_dfs_follow_mountpoint(struct dentry *dentry, struct nameidata *nd)
nd->path.dentry,
referrals[i].node_name);
cFYI(1, ("%s: cifs_dfs_do_refmount:%s , mnt:%p",
- __FUNCTION__,
+ __func__,
referrals[i].node_name, mnt));
/* complete mount procedure if we accured submount */
@@ -365,7 +364,7 @@ out:
FreeXid(xid);
free_dfs_info_array(referrals, num_referrals);
kfree(full_path);
- cFYI(1, ("leaving %s" , __FUNCTION__));
+ cFYI(1, ("leaving %s" , __func__));
return ERR_PTR(rc);
out_err:
path_put(&nd->path);
diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c
index f93932c2177..1cb5b0a9f2a 100644
--- a/fs/cifs/cifsacl.c
+++ b/fs/cifs/cifsacl.c
@@ -1,7 +1,7 @@
/*
* fs/cifs/cifsacl.c
*
- * Copyright (C) International Business Machines Corp., 2007
+ * Copyright (C) International Business Machines Corp., 2007,2008
* Author(s): Steve French (sfrench@us.ibm.com)
*
* Contains the routines for mapping CIFS/NTFS ACLs
@@ -261,7 +261,7 @@ static void mode_to_access_flags(umode_t mode, umode_t bits_to_use,
return;
}
-static __le16 fill_ace_for_sid(struct cifs_ace *pntace,
+static __u16 fill_ace_for_sid(struct cifs_ace *pntace,
const struct cifs_sid *psid, __u64 nmode, umode_t bits)
{
int i;
@@ -411,7 +411,7 @@ static void parse_dacl(struct cifs_acl *pdacl, char *end_of_acl,
static int set_chmod_dacl(struct cifs_acl *pndacl, struct cifs_sid *pownersid,
struct cifs_sid *pgrpsid, __u64 nmode)
{
- __le16 size = 0;
+ u16 size = 0;
struct cifs_acl *pnndacl;
pnndacl = (struct cifs_acl *)((char *)pndacl + sizeof(struct cifs_acl));
@@ -556,9 +556,9 @@ static int build_sec_desc(struct cifs_ntsd *pntsd, struct cifs_ntsd *pnntsd,
/* Retrieve an ACL from the server */
static struct cifs_ntsd *get_cifs_acl(u32 *pacllen, struct inode *inode,
- const char *path)
+ const char *path, const __u16 *pfid)
{
- struct cifsFileInfo *open_file;
+ struct cifsFileInfo *open_file = NULL;
int unlock_file = FALSE;
int xid;
int rc = -EIO;
@@ -573,7 +573,11 @@ static struct cifs_ntsd *get_cifs_acl(u32 *pacllen, struct inode *inode,
return NULL;
xid = GetXid();
- open_file = find_readable_file(CIFS_I(inode));
+ if (pfid == NULL)
+ open_file = find_readable_file(CIFS_I(inode));
+ else
+ fid = *pfid;
+
sb = inode->i_sb;
if (sb == NULL) {
FreeXid(xid);
@@ -584,7 +588,7 @@ static struct cifs_ntsd *get_cifs_acl(u32 *pacllen, struct inode *inode,
if (open_file) {
unlock_file = TRUE;
fid = open_file->netfid;
- } else {
+ } else if (pfid == NULL) {
int oplock = FALSE;
/* open file */
rc = CIFSSMBOpen(xid, cifs_sb->tcon, path, FILE_OPEN,
@@ -600,10 +604,11 @@ static struct cifs_ntsd *get_cifs_acl(u32 *pacllen, struct inode *inode,
rc = CIFSSMBGetCIFSACL(xid, cifs_sb->tcon, fid, &pntsd, pacllen);
cFYI(1, ("GetCIFSACL rc = %d ACL len %d", rc, *pacllen));
- if (unlock_file == TRUE)
+ if (unlock_file == TRUE) /* find_readable_file increments ref count */
atomic_dec(&open_file->wrtPending);
- else
+ else if (pfid == NULL) /* if opened above we have to close the handle */
CIFSSMBClose(xid, cifs_sb->tcon, fid);
+ /* else handle was passed in by caller */
FreeXid(xid);
return pntsd;
@@ -664,14 +669,14 @@ static int set_cifs_acl(struct cifs_ntsd *pnntsd, __u32 acllen,
}
/* Translate the CIFS ACL (simlar to NTFS ACL) for a file into mode bits */
-void acl_to_uid_mode(struct inode *inode, const char *path)
+void acl_to_uid_mode(struct inode *inode, const char *path, const __u16 *pfid)
{
struct cifs_ntsd *pntsd = NULL;
u32 acllen = 0;
int rc = 0;
cFYI(DBG2, ("converting ACL to mode for %s", path));
- pntsd = get_cifs_acl(&acllen, inode, path);
+ pntsd = get_cifs_acl(&acllen, inode, path, pfid);
/* if we can retrieve the ACL, now parse Access Control Entries, ACEs */
if (pntsd)
@@ -694,7 +699,7 @@ int mode_to_acl(struct inode *inode, const char *path, __u64 nmode)
cFYI(DBG2, ("set ACL from mode for %s", path));
/* Get the security descriptor */
- pntsd = get_cifs_acl(&acllen, inode, path);
+ pntsd = get_cifs_acl(&acllen, inode, path, NULL);
/* Add three ACEs for owner, group, everyone getting rid of
other ACEs as chmod disables ACEs and set the security descriptor */
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index 0af63e6b426..7e5e0e78cd7 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -39,8 +39,8 @@ extern int smb_send(struct socket *, struct smb_hdr *,
unsigned int /* length */ , struct sockaddr *);
extern unsigned int _GetXid(void);
extern void _FreeXid(unsigned int);
-#define GetXid() (int)_GetXid(); cFYI(1,("CIFS VFS: in %s as Xid: %d with uid: %d",__FUNCTION__, xid,current->fsuid));
-#define FreeXid(curr_xid) {_FreeXid(curr_xid); cFYI(1,("CIFS VFS: leaving %s (xid = %d) rc = %d",__FUNCTION__,curr_xid,(int)rc));}
+#define GetXid() (int)_GetXid(); cFYI(1,("CIFS VFS: in %s as Xid: %d with uid: %d",__func__, xid,current->fsuid));
+#define FreeXid(curr_xid) {_FreeXid(curr_xid); cFYI(1,("CIFS VFS: leaving %s (xid = %d) rc = %d",__func__,curr_xid,(int)rc));}
extern char *build_path_from_dentry(struct dentry *);
extern char *build_wildcard_path_from_dentry(struct dentry *direntry);
/* extern void renew_parental_timestamps(struct dentry *direntry);*/
@@ -92,11 +92,12 @@ extern struct timespec cnvrtDosUnixTm(__u16 date, __u16 time);
extern int cifs_get_inode_info(struct inode **pinode,
const unsigned char *search_path,
FILE_ALL_INFO * pfile_info,
- struct super_block *sb, int xid);
+ struct super_block *sb, int xid, const __u16 *pfid);
extern int cifs_get_inode_info_unix(struct inode **pinode,
const unsigned char *search_path,
struct super_block *sb, int xid);
-extern void acl_to_uid_mode(struct inode *inode, const char *search_path);
+extern void acl_to_uid_mode(struct inode *inode, const char *path,
+ const __u16 *pfid);
extern int mode_to_acl(struct inode *inode, const char *path, __u64);
extern int cifs_mount(struct super_block *, struct cifs_sb_info *, char *,
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index 4e83b47c4b3..0f5c62ba403 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -229,7 +229,8 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode,
inode->i_sb, xid);
else {
rc = cifs_get_inode_info(&newinode, full_path,
- buf, inode->i_sb, xid);
+ buf, inode->i_sb, xid,
+ &fileHandle);
if (newinode) {
newinode->i_mode = mode;
if ((oplock & CIFS_CREATE_ACTION) &&
@@ -483,7 +484,7 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry,
parent_dir_inode->i_sb, xid);
else
rc = cifs_get_inode_info(&newInode, full_path, NULL,
- parent_dir_inode->i_sb, xid);
+ parent_dir_inode->i_sb, xid, NULL);
if ((rc == 0) && (newInode != NULL)) {
if (pTcon->nocase)
diff --git a/fs/cifs/dns_resolve.c b/fs/cifs/dns_resolve.c
index ef7f4382434..7cc86c41818 100644
--- a/fs/cifs/dns_resolve.c
+++ b/fs/cifs/dns_resolve.c
@@ -77,14 +77,14 @@ dns_resolve_server_name_to_ip(const char *unc, char **ip_addr)
/* search for server name delimiter */
len = strlen(unc);
if (len < 3) {
- cFYI(1, ("%s: unc is too short: %s", __FUNCTION__, unc));
+ cFYI(1, ("%s: unc is too short: %s", __func__, unc));
return -EINVAL;
}
len -= 2;
name = memchr(unc+2, '\\', len);
if (!name) {
cFYI(1, ("%s: probably server name is whole unc: %s",
- __FUNCTION__, unc));
+ __func__, unc));
} else {
len = (name - unc) - 2/* leading // */;
}
@@ -104,7 +104,7 @@ dns_resolve_server_name_to_ip(const char *unc, char **ip_addr)
if (*ip_addr) {
memcpy(*ip_addr, rkey->payload.data, len);
(*ip_addr)[len] = '\0';
- cFYI(1, ("%s: resolved: %s to %s", __FUNCTION__,
+ cFYI(1, ("%s: resolved: %s to %s", __func__,
rkey->description,
*ip_addr
));
@@ -114,7 +114,7 @@ dns_resolve_server_name_to_ip(const char *unc, char **ip_addr)
}
key_put(rkey);
} else {
- cERROR(1, ("%s: unable to resolve: %s", __FUNCTION__, name));
+ cERROR(1, ("%s: unable to resolve: %s", __func__, name));
}
kfree(name);
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index fa849c91d32..40b690073fc 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -145,7 +145,7 @@ client_can_cache:
full_path, inode->i_sb, xid);
else
rc = cifs_get_inode_info(&file->f_path.dentry->d_inode,
- full_path, buf, inode->i_sb, xid);
+ full_path, buf, inode->i_sb, xid, NULL);
if ((*oplock & 0xF) == OPLOCK_EXCLUSIVE) {
pCifsInode->clientCanCacheAll = TRUE;
@@ -440,7 +440,7 @@ reopen_error_exit:
else
rc = cifs_get_inode_info(&inode,
full_path, NULL, inode->i_sb,
- xid);
+ xid, NULL);
} /* else we are writing out data to server already
and could deadlock if we tried to flush data, and
since we do not know if we have data that would
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 24eb4d39215..bc673c8c1e6 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -30,7 +30,7 @@
#include "cifs_fs_sb.h"
-static void cifs_set_ops(struct inode *inode)
+static void cifs_set_ops(struct inode *inode, const bool is_dfs_referral)
{
struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
@@ -57,8 +57,16 @@ static void cifs_set_ops(struct inode *inode)
inode->i_data.a_ops = &cifs_addr_ops;
break;
case S_IFDIR:
- inode->i_op = &cifs_dir_inode_ops;
- inode->i_fop = &cifs_dir_ops;
+#ifdef CONFIG_CIFS_DFS_UPCALL
+ if (is_dfs_referral) {
+ inode->i_op = &cifs_dfs_referral_inode_operations;
+ } else {
+#else /* NO DFS support, treat as a directory */
+ {
+#endif
+ inode->i_op = &cifs_dir_inode_ops;
+ inode->i_fop = &cifs_dir_ops;
+ }
break;
case S_IFLNK:
inode->i_op = &cifs_symlink_inode_ops;
@@ -153,6 +161,30 @@ static void cifs_unix_info_to_inode(struct inode *inode,
spin_unlock(&inode->i_lock);
}
+static const unsigned char *cifs_get_search_path(struct cifsTconInfo *pTcon,
+ const char *search_path)
+{
+ int tree_len;
+ int path_len;
+ char *tmp_path;
+
+ if (!(pTcon->Flags & SMB_SHARE_IS_IN_DFS))
+ return search_path;
+
+ /* use full path name for working with DFS */
+ tree_len = strnlen(pTcon->treeName, MAX_TREE_SIZE + 1);
+ path_len = strnlen(search_path, MAX_PATHCONF);
+
+ tmp_path = kmalloc(tree_len+path_len+1, GFP_KERNEL);
+ if (tmp_path == NULL)
+ return search_path;
+
+ strncpy(tmp_path, pTcon->treeName, tree_len);
+ strncpy(tmp_path+tree_len, search_path, path_len);
+ tmp_path[tree_len+path_len] = 0;
+ return tmp_path;
+}
+
int cifs_get_inode_info_unix(struct inode **pinode,
const unsigned char *search_path, struct super_block *sb, int xid)
{
@@ -161,41 +193,31 @@ int cifs_get_inode_info_unix(struct inode **pinode,
struct cifsTconInfo *pTcon;
struct inode *inode;
struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
- char *tmp_path;
+ const unsigned char *full_path;
+ bool is_dfs_referral = false;
pTcon = cifs_sb->tcon;
cFYI(1, ("Getting info on %s", search_path));
+
+ full_path = cifs_get_search_path(pTcon, search_path);
+
+try_again_CIFSSMBUnixQPathInfo:
/* could have done a find first instead but this returns more info */
- rc = CIFSSMBUnixQPathInfo(xid, pTcon, search_path, &findData,
+ rc = CIFSSMBUnixQPathInfo(xid, pTcon, full_path, &findData,
cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
/* dump_mem("\nUnixQPathInfo return data", &findData,
sizeof(findData)); */
if (rc) {
- if (rc == -EREMOTE) {
- tmp_path =
- kmalloc(strnlen(pTcon->treeName,
- MAX_TREE_SIZE + 1) +
- strnlen(search_path, MAX_PATHCONF) + 1,
- GFP_KERNEL);
- if (tmp_path == NULL)
- return -ENOMEM;
-
- /* have to skip first of the double backslash of
- UNC name */
- strncpy(tmp_path, pTcon->treeName, MAX_TREE_SIZE);
- strncat(tmp_path, search_path, MAX_PATHCONF);
- rc = connect_to_dfs_path(xid, pTcon->ses,
- /* treename + */ tmp_path,
- cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_MAP_SPECIAL_CHR);
- kfree(tmp_path);
-
- /* BB fix up inode etc. */
- } else if (rc) {
- return rc;
+ if (rc == -EREMOTE && !is_dfs_referral) {
+ is_dfs_referral = true;
+ if (full_path != search_path) {
+ kfree(full_path);
+ full_path = search_path;
+ }
+ goto try_again_CIFSSMBUnixQPathInfo;
}
+ goto cgiiu_exit;
} else {
struct cifsInodeInfo *cifsInfo;
__u64 num_of_bytes = le64_to_cpu(findData.NumOfBytes);
@@ -204,8 +226,10 @@ int cifs_get_inode_info_unix(struct inode **pinode,
/* get new inode */
if (*pinode == NULL) {
*pinode = new_inode(sb);
- if (*pinode == NULL)
- return -ENOMEM;
+ if (*pinode == NULL) {
+ rc = -ENOMEM;
+ goto cgiiu_exit;
+ }
/* Is an i_ino of zero legal? */
/* Are there sanity checks we can use to ensure that
the server is really filling in that field? */
@@ -237,8 +261,11 @@ int cifs_get_inode_info_unix(struct inode **pinode,
(unsigned long) inode->i_size,
(unsigned long long)inode->i_blocks));
- cifs_set_ops(inode);
+ cifs_set_ops(inode, is_dfs_referral);
}
+cgiiu_exit:
+ if (full_path != search_path)
+ kfree(full_path);
return rc;
}
@@ -347,15 +374,16 @@ static int get_sfu_mode(struct inode *inode,
int cifs_get_inode_info(struct inode **pinode,
const unsigned char *search_path, FILE_ALL_INFO *pfindData,
- struct super_block *sb, int xid)
+ struct super_block *sb, int xid, const __u16 *pfid)
{
int rc = 0;
struct cifsTconInfo *pTcon;
struct inode *inode;
struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
- char *tmp_path;
+ const unsigned char *full_path = NULL;
char *buf = NULL;
int adjustTZ = FALSE;
+ bool is_dfs_referral = false;
pTcon = cifs_sb->tcon;
cFYI(1, ("Getting info on %s", search_path));
@@ -373,8 +401,12 @@ int cifs_get_inode_info(struct inode **pinode,
if (buf == NULL)
return -ENOMEM;
pfindData = (FILE_ALL_INFO *)buf;
+
+ full_path = cifs_get_search_path(pTcon, search_path);
+
+try_again_CIFSSMBQPathInfo:
/* could do find first instead but this returns more info */
- rc = CIFSSMBQPathInfo(xid, pTcon, search_path, pfindData,
+ rc = CIFSSMBQPathInfo(xid, pTcon, full_path, pfindData,
0 /* not legacy */,
cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
@@ -382,7 +414,7 @@ int cifs_get_inode_info(struct inode **pinode,
when server claims no NT SMB support and the above call
failed at least once - set flag in tcon or mount */
if ((rc == -EOPNOTSUPP) || (rc == -EINVAL)) {
- rc = SMBQueryInformation(xid, pTcon, search_path,
+ rc = SMBQueryInformation(xid, pTcon, full_path,
pfindData, cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
@@ -391,31 +423,15 @@ int cifs_get_inode_info(struct inode **pinode,
}
/* dump_mem("\nQPathInfo return data",&findData, sizeof(findData)); */
if (rc) {
- if (rc == -EREMOTE) {
- tmp_path =
- kmalloc(strnlen
- (pTcon->treeName,
- MAX_TREE_SIZE + 1) +
- strnlen(search_path, MAX_PATHCONF) + 1,
- GFP_KERNEL);
- if (tmp_path == NULL) {
- kfree(buf);
- return -ENOMEM;
+ if (rc == -EREMOTE && !is_dfs_referral) {
+ is_dfs_referral = true;
+ if (full_path != search_path) {
+ kfree(full_path);
+ full_path = search_path;
}
-
- strncpy(tmp_path, pTcon->treeName, MAX_TREE_SIZE);
- strncat(tmp_path, search_path, MAX_PATHCONF);
- rc = connect_to_dfs_path(xid, pTcon->ses,
- /* treename + */ tmp_path,
- cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_MAP_SPECIAL_CHR);
- kfree(tmp_path);
- /* BB fix up inode etc. */
- } else if (rc) {
- kfree(buf);
- return rc;
+ goto try_again_CIFSSMBQPathInfo;
}
+ goto cgii_exit;
} else {
struct cifsInodeInfo *cifsInfo;
__u32 attr = le32_to_cpu(pfindData->Attributes);
@@ -424,8 +440,8 @@ int cifs_get_inode_info(struct inode **pinode,
if (*pinode == NULL) {
*pinode = new_inode(sb);
if (*pinode == NULL) {
- kfree(buf);
- return -ENOMEM;
+ rc = -ENOMEM;
+ goto cgii_exit;
}
/* Is an i_ino of zero legal? Can we use that to check
if the server supports returning inode numbers? Are
@@ -559,7 +575,7 @@ int cifs_get_inode_info(struct inode **pinode,
/* fill in 0777 bits from ACL */
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
cFYI(1, ("Getting mode bits from ACL"));
- acl_to_uid_mode(inode, search_path);
+ acl_to_uid_mode(inode, search_path, pfid);
}
#endif
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) {
@@ -573,8 +589,11 @@ int cifs_get_inode_info(struct inode **pinode,
atomic_set(&cifsInfo->inUse, 1);
}
- cifs_set_ops(inode);
+ cifs_set_ops(inode, is_dfs_referral);
}
+cgii_exit:
+ if (full_path != search_path)
+ kfree(full_path);
kfree(buf);
return rc;
}
@@ -603,7 +622,8 @@ struct inode *cifs_iget(struct super_block *sb, unsigned long ino)
if (cifs_sb->tcon->unix_ext)
rc = cifs_get_inode_info_unix(&inode, "", inode->i_sb, xid);
else
- rc = cifs_get_inode_info(&inode, "", NULL, inode->i_sb, xid);
+ rc = cifs_get_inode_info(&inode, "", NULL, inode->i_sb, xid,
+ NULL);
if (rc && cifs_sb->tcon->ipc) {
cFYI(1, ("ipc connection - fake read inode"));
inode->i_mode |= S_IFDIR;
@@ -804,7 +824,7 @@ static void posix_fill_in_inode(struct inode *tmp_inode,
local_size = tmp_inode->i_size;
cifs_unix_info_to_inode(tmp_inode, pData, 1);
- cifs_set_ops(tmp_inode);
+ cifs_set_ops(tmp_inode, false);
if (!S_ISREG(tmp_inode->i_mode))
return;
@@ -936,7 +956,7 @@ mkdir_get_info:
inode->i_sb, xid);
else
rc = cifs_get_inode_info(&newinode, full_path, NULL,
- inode->i_sb, xid);
+ inode->i_sb, xid, NULL);
if (pTcon->nocase)
direntry->d_op = &cifs_ci_dentry_ops;
@@ -1218,7 +1238,7 @@ int cifs_revalidate(struct dentry *direntry)
}
} else {
rc = cifs_get_inode_info(&direntry->d_inode, full_path, NULL,
- direntry->d_sb, xid);
+ direntry->d_sb, xid, NULL);
if (rc) {
cFYI(1, ("error on getting revalidate info %d", rc));
/* if (rc != -ENOENT)
@@ -1407,11 +1427,10 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs)
}
cifsInode = CIFS_I(direntry->d_inode);
- /* BB check if we need to refresh inode from server now ? BB */
-
- if (attrs->ia_valid & ATTR_SIZE) {
+ if ((attrs->ia_valid & ATTR_MTIME) || (attrs->ia_valid & ATTR_SIZE)) {
/*
- Flush data before changing file size on server. If the
+ Flush data before changing file size or changing the last
+ write time of the file on the server. If the
flush returns error, store it to report later and continue.
BB: This should be smarter. Why bother flushing pages that
will be truncated anyway? Also, should we error out here if
@@ -1422,7 +1441,9 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs)
CIFS_I(direntry->d_inode)->write_behind_rc = rc;
rc = 0;
}
+ }
+ if (attrs->ia_valid & ATTR_SIZE) {
/* To avoid spurious oplock breaks from server, in the case of
inodes that we already have open, avoid doing path based
setting of file size if we can do it by handle.
diff --git a/fs/cifs/link.c b/fs/cifs/link.c
index 1d6fb01b8e6..d4e7ec93285 100644
--- a/fs/cifs/link.c
+++ b/fs/cifs/link.c
@@ -205,7 +205,7 @@ cifs_symlink(struct inode *inode, struct dentry *direntry, const char *symname)
inode->i_sb, xid);
else
rc = cifs_get_inode_info(&newinode, full_path, NULL,
- inode->i_sb, xid);
+ inode->i_sb, xid, NULL);
if (rc != 0) {
cFYI(1, ("Create symlink ok, getinodeinfo fail rc = %d",
diff --git a/fs/dquot.c b/fs/dquot.c
index 9c7feb62eed..41b9dbd68b0 100644
--- a/fs/dquot.c
+++ b/fs/dquot.c
@@ -1522,8 +1522,8 @@ int vfs_quota_off(struct super_block *sb, int type)
truncate_inode_pages(&toputinode[cnt]->i_data, 0);
mutex_unlock(&toputinode[cnt]->i_mutex);
mark_inode_dirty(toputinode[cnt]);
- iput(toputinode[cnt]);
}
+ iput(toputinode[cnt]);
mutex_unlock(&dqopt->dqonoff_mutex);
}
if (sb->s_bdev)
diff --git a/fs/ecryptfs/dentry.c b/fs/ecryptfs/dentry.c
index 841a032050a..5e596583946 100644
--- a/fs/ecryptfs/dentry.c
+++ b/fs/ecryptfs/dentry.c
@@ -80,8 +80,8 @@ static void ecryptfs_d_release(struct dentry *dentry)
{
if (ecryptfs_dentry_to_private(dentry)) {
if (ecryptfs_dentry_to_lower(dentry)) {
- mntput(ecryptfs_dentry_to_lower_mnt(dentry));
dput(ecryptfs_dentry_to_lower(dentry));
+ mntput(ecryptfs_dentry_to_lower_mnt(dentry));
}
kmem_cache_free(ecryptfs_dentry_info_cache,
ecryptfs_dentry_to_private(dentry));
diff --git a/fs/efs/inode.c b/fs/efs/inode.c
index 79e19e5958e..a8e7797b947 100644
--- a/fs/efs/inode.c
+++ b/fs/efs/inode.c
@@ -140,7 +140,7 @@ struct inode *efs_iget(struct super_block *super, unsigned long ino)
brelse(bh);
#ifdef DEBUG
- printk(KERN_DEBUG "EFS: read_inode(): inode %lu, extents %d, mode %o\n",
+ printk(KERN_DEBUG "EFS: efs_iget(): inode %lu, extents %d, mode %o\n",
inode->i_ino, in->numextents, inode->i_mode);
#endif
diff --git a/fs/ext3/acl.c b/fs/ext3/acl.c
index d34e9967430..a754d184817 100644
--- a/fs/ext3/acl.c
+++ b/fs/ext3/acl.c
@@ -37,7 +37,7 @@ ext3_acl_from_disk(const void *value, size_t size)
return ERR_PTR(-EINVAL);
if (count == 0)
return NULL;
- acl = posix_acl_alloc(count, GFP_KERNEL);
+ acl = posix_acl_alloc(count, GFP_NOFS);
if (!acl)
return ERR_PTR(-ENOMEM);
for (n=0; n < count; n++) {
@@ -91,7 +91,7 @@ ext3_acl_to_disk(const struct posix_acl *acl, size_t *size)
*size = ext3_acl_size(acl->a_count);
ext_acl = kmalloc(sizeof(ext3_acl_header) + acl->a_count *
- sizeof(ext3_acl_entry), GFP_KERNEL);
+ sizeof(ext3_acl_entry), GFP_NOFS);
if (!ext_acl)
return ERR_PTR(-ENOMEM);
ext_acl->a_version = cpu_to_le32(EXT3_ACL_VERSION);
@@ -187,7 +187,7 @@ ext3_get_acl(struct inode *inode, int type)
}
retval = ext3_xattr_get(inode, name_index, "", NULL, 0);
if (retval > 0) {
- value = kmalloc(retval, GFP_KERNEL);
+ value = kmalloc(retval, GFP_NOFS);
if (!value)
return ERR_PTR(-ENOMEM);
retval = ext3_xattr_get(inode, name_index, "", value, retval);
@@ -335,7 +335,7 @@ ext3_init_acl(handle_t *handle, struct inode *inode, struct inode *dir)
if (error)
goto cleanup;
}
- clone = posix_acl_clone(acl, GFP_KERNEL);
+ clone = posix_acl_clone(acl, GFP_NOFS);
error = -ENOMEM;
if (!clone)
goto cleanup;
diff --git a/fs/ext3/resize.c b/fs/ext3/resize.c
index 9397d779c43..0e97b6e07cb 100644
--- a/fs/ext3/resize.c
+++ b/fs/ext3/resize.c
@@ -485,7 +485,7 @@ static int add_new_gdb(handle_t *handle, struct inode *inode,
goto exit_dindj;
n_group_desc = kmalloc((gdb_num + 1) * sizeof(struct buffer_head *),
- GFP_KERNEL);
+ GFP_NOFS);
if (!n_group_desc) {
err = -ENOMEM;
ext3_warning (sb, __FUNCTION__,
@@ -568,7 +568,7 @@ static int reserve_backup_gdb(handle_t *handle, struct inode *inode,
int res, i;
int err;
- primary = kmalloc(reserved_gdb * sizeof(*primary), GFP_KERNEL);
+ primary = kmalloc(reserved_gdb * sizeof(*primary), GFP_NOFS);
if (!primary)
return -ENOMEM;
diff --git a/fs/ext3/xattr.c b/fs/ext3/xattr.c
index fb89c299bec..a6ea4d6a8bb 100644
--- a/fs/ext3/xattr.c
+++ b/fs/ext3/xattr.c
@@ -728,7 +728,7 @@ ext3_xattr_block_set(handle_t *handle, struct inode *inode,
ce = NULL;
}
ea_bdebug(bs->bh, "cloning");
- s->base = kmalloc(bs->bh->b_size, GFP_KERNEL);
+ s->base = kmalloc(bs->bh->b_size, GFP_NOFS);
error = -ENOMEM;
if (s->base == NULL)
goto cleanup;
@@ -740,7 +740,7 @@ ext3_xattr_block_set(handle_t *handle, struct inode *inode,
}
} else {
/* Allocate a buffer where we construct the new block. */
- s->base = kzalloc(sb->s_blocksize, GFP_KERNEL);
+ s->base = kzalloc(sb->s_blocksize, GFP_NOFS);
/* assert(header == s->base) */
error = -ENOMEM;
if (s->base == NULL)
diff --git a/fs/file_table.c b/fs/file_table.c
index 6d27befe2d4..986ff4ed0a7 100644
--- a/fs/file_table.c
+++ b/fs/file_table.c
@@ -83,6 +83,12 @@ int proc_nr_files(ctl_table *table, int write, struct file *filp,
/* Find an unused file structure and return a pointer to it.
* Returns NULL, if there are no more free file structures or
* we run out of memory.
+ *
+ * Be very careful using this. You are responsible for
+ * getting write access to any mount that you might assign
+ * to this filp, if it is opened for write. If this is not
+ * done, you will imbalance int the mount's writer count
+ * and a warning at __fput() time.
*/
struct file *get_empty_filp(void)
{
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index c0076077d33..06557679ca4 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -751,7 +751,7 @@ int generic_osync_inode(struct inode *inode, struct address_space *mapping, int
EXPORT_SYMBOL(generic_osync_inode);
/**
- * writeback_acquire: attempt to get exclusive writeback access to a device
+ * writeback_acquire - attempt to get exclusive writeback access to a device
* @bdi: the device's backing_dev_info structure
*
* It is a waste of resources to have more than one pdflush thread blocked on
@@ -768,7 +768,7 @@ int writeback_acquire(struct backing_dev_info *bdi)
}
/**
- * writeback_in_progress: determine whether there is writeback in progress
+ * writeback_in_progress - determine whether there is writeback in progress
* @bdi: the device's backing_dev_info structure.
*
* Determine whether there is writeback in progress against a backing device.
@@ -779,7 +779,7 @@ int writeback_in_progress(struct backing_dev_info *bdi)
}
/**
- * writeback_release: relinquish exclusive writeback access against a device.
+ * writeback_release - relinquish exclusive writeback access against a device.
* @bdi: the device's backing_dev_info structure
*/
void writeback_release(struct backing_dev_info *bdi)
diff --git a/fs/hppfs/hppfs_kern.c b/fs/hppfs/hppfs_kern.c
index a1e1f0f61aa..8601d8ef3b5 100644
--- a/fs/hppfs/hppfs_kern.c
+++ b/fs/hppfs/hppfs_kern.c
@@ -1,23 +1,24 @@
/*
- * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
-#include <linux/fs.h>
+#include <linux/ctype.h>
+#include <linux/dcache.h>
#include <linux/file.h>
-#include <linux/module.h>
+#include <linux/fs.h>
#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/list.h>
#include <linux/kernel.h>
-#include <linux/ctype.h>
-#include <linux/dcache.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/mount.h>
+#include <linux/slab.h>
#include <linux/statfs.h>
+#include <linux/types.h>
#include <asm/uaccess.h>
-#include <asm/fcntl.h>
#include "os.h"
-static int init_inode(struct inode *inode, struct dentry *dentry);
+static struct inode *get_inode(struct super_block *, struct dentry *);
struct hppfs_data {
struct list_head list;
@@ -51,14 +52,14 @@ static int is_pid(struct dentry *dentry)
int i;
sb = dentry->d_sb;
- if((sb->s_op != &hppfs_sbops) || (dentry->d_parent != sb->s_root))
- return(0);
+ if ((sb->s_op != &hppfs_sbops) || (dentry->d_parent != sb->s_root))
+ return 0;
- for(i = 0; i < dentry->d_name.len; i++){
- if(!isdigit(dentry->d_name.name[i]))
- return(0);
+ for (i = 0; i < dentry->d_name.len; i++) {
+ if (!isdigit(dentry->d_name.name[i]))
+ return 0;
}
- return(1);
+ return 1;
}
static char *dentry_name(struct dentry *dentry, int extra)
@@ -70,8 +71,8 @@ static char *dentry_name(struct dentry *dentry, int extra)
len = 0;
parent = dentry;
- while(parent->d_parent != parent){
- if(is_pid(parent))
+ while (parent->d_parent != parent) {
+ if (is_pid(parent))
len += strlen("pid") + 1;
else len += parent->d_name.len + 1;
parent = parent->d_parent;
@@ -80,12 +81,13 @@ static char *dentry_name(struct dentry *dentry, int extra)
root = "proc";
len += strlen(root);
name = kmalloc(len + extra + 1, GFP_KERNEL);
- if(name == NULL) return(NULL);
+ if (name == NULL)
+ return NULL;
name[len] = '\0';
parent = dentry;
- while(parent->d_parent != parent){
- if(is_pid(parent)){
+ while (parent->d_parent != parent) {
+ if (is_pid(parent)) {
seg_name = "pid";
seg_len = strlen("pid");
}
@@ -100,27 +102,25 @@ static char *dentry_name(struct dentry *dentry, int extra)
parent = parent->d_parent;
}
strncpy(name, root, strlen(root));
- return(name);
+ return name;
}
-struct dentry_operations hppfs_dentry_ops = {
-};
-
static int file_removed(struct dentry *dentry, const char *file)
{
char *host_file;
int extra, fd;
extra = 0;
- if(file != NULL) extra += strlen(file) + 1;
+ if (file != NULL)
+ extra += strlen(file) + 1;
host_file = dentry_name(dentry, extra + strlen("/remove"));
- if(host_file == NULL){
- printk("file_removed : allocation failed\n");
- return(-ENOMEM);
+ if (host_file == NULL) {
+ printk(KERN_ERR "file_removed : allocation failed\n");
+ return -ENOMEM;
}
- if(file != NULL){
+ if (file != NULL) {
strcat(host_file, "/");
strcat(host_file, file);
}
@@ -128,45 +128,11 @@ static int file_removed(struct dentry *dentry, const char *file)
fd = os_open_file(host_file, of_read(OPENFLAGS()), 0);
kfree(host_file);
- if(fd > 0){
+ if (fd > 0) {
os_close_file(fd);
- return(1);
- }
- return(0);
-}
-
-static void hppfs_read_inode(struct inode *ino)
-{
- struct inode *proc_ino;
-
- if(HPPFS_I(ino)->proc_dentry == NULL)
- return;
-
- proc_ino = HPPFS_I(ino)->proc_dentry->d_inode;
- ino->i_uid = proc_ino->i_uid;
- ino->i_gid = proc_ino->i_gid;
- ino->i_atime = proc_ino->i_atime;
- ino->i_mtime = proc_ino->i_mtime;
- ino->i_ctime = proc_ino->i_ctime;
- ino->i_ino = proc_ino->i_ino;
- ino->i_mode = proc_ino->i_mode;
- ino->i_nlink = proc_ino->i_nlink;
- ino->i_size = proc_ino->i_size;
- ino->i_blocks = proc_ino->i_blocks;
-}
-
-static struct inode *hppfs_iget(struct super_block *sb)
-{
- struct inode *inode;
-
- inode = iget_locked(sb, 0);
- if (!inode)
- return ERR_PTR(-ENOMEM);
- if (inode->i_state & I_NEW) {
- hppfs_read_inode(inode);
- unlock_new_inode(inode);
+ return 1;
}
- return inode;
+ return 0;
}
static struct dentry *hppfs_lookup(struct inode *ino, struct dentry *dentry,
@@ -177,55 +143,45 @@ static struct dentry *hppfs_lookup(struct inode *ino, struct dentry *dentry,
int err, deleted;
deleted = file_removed(dentry, NULL);
- if(deleted < 0)
- return(ERR_PTR(deleted));
- else if(deleted)
- return(ERR_PTR(-ENOENT));
+ if (deleted < 0)
+ return ERR_PTR(deleted);
+ else if (deleted)
+ return ERR_PTR(-ENOENT);
err = -ENOMEM;
parent = HPPFS_I(ino)->proc_dentry;
mutex_lock(&parent->d_inode->i_mutex);
proc_dentry = d_lookup(parent, &dentry->d_name);
- if(proc_dentry == NULL){
+ if (proc_dentry == NULL) {
proc_dentry = d_alloc(parent, &dentry->d_name);
- if(proc_dentry == NULL){
+ if (proc_dentry == NULL) {
mutex_unlock(&parent->d_inode->i_mutex);
goto out;
}
new = (*parent->d_inode->i_op->lookup)(parent->d_inode,
proc_dentry, NULL);
- if(new){
+ if (new) {
dput(proc_dentry);
proc_dentry = new;
}
}
mutex_unlock(&parent->d_inode->i_mutex);
- if(IS_ERR(proc_dentry))
- return(proc_dentry);
+ if (IS_ERR(proc_dentry))
+ return proc_dentry;
- inode = hppfs_iget(ino->i_sb);
- if (IS_ERR(inode)) {
- err = PTR_ERR(inode);
+ err = -ENOMEM;
+ inode = get_inode(ino->i_sb, proc_dentry);
+ if (!inode)
goto out_dput;
- }
-
- err = init_inode(inode, proc_dentry);
- if(err)
- goto out_put;
-
- hppfs_read_inode(inode);
d_add(dentry, inode);
- dentry->d_op = &hppfs_dentry_ops;
- return(NULL);
+ return NULL;
- out_put:
- iput(inode);
out_dput:
dput(proc_dentry);
out:
- return(ERR_PTR(err));
+ return ERR_PTR(err);
}
static const struct inode_operations hppfs_file_iops = {
@@ -239,15 +195,16 @@ static ssize_t read_proc(struct file *file, char __user *buf, ssize_t count,
read = file->f_path.dentry->d_inode->i_fop->read;
- if(!is_user)
+ if (!is_user)
set_fs(KERNEL_DS);
n = (*read)(file, buf, count, &file->f_pos);
- if(!is_user)
+ if (!is_user)
set_fs(USER_DS);
- if(ppos) *ppos = file->f_pos;
+ if (ppos)
+ *ppos = file->f_pos;
return n;
}
@@ -259,24 +216,23 @@ static ssize_t hppfs_read_file(int fd, char __user *buf, ssize_t count)
n = -ENOMEM;
new_buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
- if(new_buf == NULL){
- printk("hppfs_read_file : kmalloc failed\n");
+ if (new_buf == NULL) {
+ printk(KERN_ERR "hppfs_read_file : kmalloc failed\n");
goto out;
}
n = 0;
- while(count > 0){
+ while (count > 0) {
cur = min_t(ssize_t, count, PAGE_SIZE);
err = os_read_file(fd, new_buf, cur);
- if(err < 0){
- printk("hppfs_read : read failed, errno = %d\n",
- err);
+ if (err < 0) {
+ printk(KERN_ERR "hppfs_read : read failed, "
+ "errno = %d\n", err);
n = err;
goto out_free;
- }
- else if(err == 0)
+ } else if (err == 0)
break;
- if(copy_to_user(buf, new_buf, err)){
+ if (copy_to_user(buf, new_buf, err)) {
n = -EFAULT;
goto out_free;
}
@@ -297,35 +253,36 @@ static ssize_t hppfs_read(struct file *file, char __user *buf, size_t count,
loff_t off;
int err;
- if(hppfs->contents != NULL){
- if(*ppos >= hppfs->len) return(0);
+ if (hppfs->contents != NULL) {
+ if (*ppos >= hppfs->len)
+ return 0;
data = hppfs->contents;
off = *ppos;
- while(off >= sizeof(data->contents)){
+ while (off >= sizeof(data->contents)) {
data = list_entry(data->list.next, struct hppfs_data,
list);
off -= sizeof(data->contents);
}
- if(off + count > hppfs->len)
+ if (off + count > hppfs->len)
count = hppfs->len - off;
copy_to_user(buf, &data->contents[off], count);
*ppos += count;
- }
- else if(hppfs->host_fd != -1){
+ } else if (hppfs->host_fd != -1) {
err = os_seek_file(hppfs->host_fd, *ppos);
- if(err){
- printk("hppfs_read : seek failed, errno = %d\n", err);
- return(err);
+ if (err) {
+ printk(KERN_ERR "hppfs_read : seek failed, "
+ "errno = %d\n", err);
+ return err;
}
count = hppfs_read_file(hppfs->host_fd, buf, count);
- if(count > 0)
+ if (count > 0)
*ppos += count;
}
else count = read_proc(hppfs->proc_file, buf, count, ppos, 1);
- return(count);
+ return count;
}
static ssize_t hppfs_write(struct file *file, const char __user *buf, size_t len,
@@ -342,7 +299,7 @@ static ssize_t hppfs_write(struct file *file, const char __user *buf, size_t len
err = (*write)(proc_file, buf, len, &proc_file->f_pos);
file->f_pos = proc_file->f_pos;
- return(err);
+ return err;
}
static int open_host_sock(char *host_file, int *filter_out)
@@ -354,13 +311,13 @@ static int open_host_sock(char *host_file, int *filter_out)
strcpy(end, "/rw");
*filter_out = 1;
fd = os_connect_socket(host_file);
- if(fd > 0)
- return(fd);
+ if (fd > 0)
+ return fd;
strcpy(end, "/r");
*filter_out = 0;
fd = os_connect_socket(host_file);
- return(fd);
+ return fd;
}
static void free_contents(struct hppfs_data *head)
@@ -368,9 +325,10 @@ static void free_contents(struct hppfs_data *head)
struct hppfs_data *data;
struct list_head *ele, *next;
- if(head == NULL) return;
+ if (head == NULL)
+ return;
- list_for_each_safe(ele, next, &head->list){
+ list_for_each_safe(ele, next, &head->list) {
data = list_entry(ele, struct hppfs_data, list);
kfree(data);
}
@@ -387,8 +345,8 @@ static struct hppfs_data *hppfs_get_data(int fd, int filter,
err = -ENOMEM;
data = kmalloc(sizeof(*data), GFP_KERNEL);
- if(data == NULL){
- printk("hppfs_get_data : head allocation failed\n");
+ if (data == NULL) {
+ printk(KERN_ERR "hppfs_get_data : head allocation failed\n");
goto failed;
}
@@ -397,36 +355,36 @@ static struct hppfs_data *hppfs_get_data(int fd, int filter,
head = data;
*size_out = 0;
- if(filter){
- while((n = read_proc(proc_file, data->contents,
+ if (filter) {
+ while ((n = read_proc(proc_file, data->contents,
sizeof(data->contents), NULL, 0)) > 0)
os_write_file(fd, data->contents, n);
err = os_shutdown_socket(fd, 0, 1);
- if(err){
- printk("hppfs_get_data : failed to shut down "
+ if (err) {
+ printk(KERN_ERR "hppfs_get_data : failed to shut down "
"socket\n");
goto failed_free;
}
}
- while(1){
+ while (1) {
n = os_read_file(fd, data->contents, sizeof(data->contents));
- if(n < 0){
+ if (n < 0) {
err = n;
- printk("hppfs_get_data : read failed, errno = %d\n",
- err);
+ printk(KERN_ERR "hppfs_get_data : read failed, "
+ "errno = %d\n", err);
goto failed_free;
- }
- else if(n == 0)
+ } else if (n == 0)
break;
*size_out += n;
- if(n < sizeof(data->contents))
+ if (n < sizeof(data->contents))
break;
new = kmalloc(sizeof(*data), GFP_KERNEL);
- if(new == 0){
- printk("hppfs_get_data : data allocation failed\n");
+ if (new == 0) {
+ printk(KERN_ERR "hppfs_get_data : data allocation "
+ "failed\n");
err = -ENOMEM;
goto failed_free;
}
@@ -435,12 +393,12 @@ static struct hppfs_data *hppfs_get_data(int fd, int filter,
list_add(&new->list, &data->list);
data = new;
}
- return(head);
+ return head;
failed_free:
free_contents(head);
failed:
- return(ERR_PTR(err));
+ return ERR_PTR(err);
}
static struct hppfs_private *hppfs_data(void)
@@ -448,77 +406,79 @@ static struct hppfs_private *hppfs_data(void)
struct hppfs_private *data;
data = kmalloc(sizeof(*data), GFP_KERNEL);
- if(data == NULL)
- return(data);
+ if (data == NULL)
+ return data;
*data = ((struct hppfs_private ) { .host_fd = -1,
.len = -1,
.contents = NULL } );
- return(data);
+ return data;
}
static int file_mode(int fmode)
{
- if(fmode == (FMODE_READ | FMODE_WRITE))
- return(O_RDWR);
- if(fmode == FMODE_READ)
- return(O_RDONLY);
- if(fmode == FMODE_WRITE)
- return(O_WRONLY);
- return(0);
+ if (fmode == (FMODE_READ | FMODE_WRITE))
+ return O_RDWR;
+ if (fmode == FMODE_READ)
+ return O_RDONLY;
+ if (fmode == FMODE_WRITE)
+ return O_WRONLY;
+ return 0;
}
static int hppfs_open(struct inode *inode, struct file *file)
{
struct hppfs_private *data;
struct dentry *proc_dentry;
+ struct vfsmount *proc_mnt;
char *host_file;
int err, fd, type, filter;
err = -ENOMEM;
data = hppfs_data();
- if(data == NULL)
+ if (data == NULL)
goto out;
host_file = dentry_name(file->f_path.dentry, strlen("/rw"));
- if(host_file == NULL)
+ if (host_file == NULL)
goto out_free2;
proc_dentry = HPPFS_I(inode)->proc_dentry;
+ proc_mnt = inode->i_sb->s_fs_info;
/* XXX This isn't closed anywhere */
- data->proc_file = dentry_open(dget(proc_dentry), NULL,
+ data->proc_file = dentry_open(dget(proc_dentry), mntget(proc_mnt),
file_mode(file->f_mode));
err = PTR_ERR(data->proc_file);
- if(IS_ERR(data->proc_file))
+ if (IS_ERR(data->proc_file))
goto out_free1;
type = os_file_type(host_file);
- if(type == OS_TYPE_FILE){
+ if (type == OS_TYPE_FILE) {
fd = os_open_file(host_file, of_read(OPENFLAGS()), 0);
- if(fd >= 0)
+ if (fd >= 0)
data->host_fd = fd;
- else printk("hppfs_open : failed to open '%s', errno = %d\n",
- host_file, -fd);
+ else
+ printk(KERN_ERR "hppfs_open : failed to open '%s', "
+ "errno = %d\n", host_file, -fd);
data->contents = NULL;
- }
- else if(type == OS_TYPE_DIR){
+ } else if (type == OS_TYPE_DIR) {
fd = open_host_sock(host_file, &filter);
- if(fd > 0){
+ if (fd > 0) {
data->contents = hppfs_get_data(fd, filter,
data->proc_file,
file, &data->len);
- if(!IS_ERR(data->contents))
+ if (!IS_ERR(data->contents))
data->host_fd = fd;
- }
- else printk("hppfs_open : failed to open a socket in "
- "'%s', errno = %d\n", host_file, -fd);
+ } else
+ printk(KERN_ERR "hppfs_open : failed to open a socket "
+ "in '%s', errno = %d\n", host_file, -fd);
}
kfree(host_file);
file->private_data = data;
- return(0);
+ return 0;
out_free1:
kfree(host_file);
@@ -526,34 +486,36 @@ static int hppfs_open(struct inode *inode, struct file *file)
free_contents(data->contents);
kfree(data);
out:
- return(err);
+ return err;
}
static int hppfs_dir_open(struct inode *inode, struct file *file)
{
struct hppfs_private *data;
struct dentry *proc_dentry;
+ struct vfsmount *proc_mnt;
int err;
err = -ENOMEM;
data = hppfs_data();
- if(data == NULL)
+ if (data == NULL)
goto out;
proc_dentry = HPPFS_I(inode)->proc_dentry;
- data->proc_file = dentry_open(dget(proc_dentry), NULL,
+ proc_mnt = inode->i_sb->s_fs_info;
+ data->proc_file = dentry_open(dget(proc_dentry), mntget(proc_mnt),
file_mode(file->f_mode));
err = PTR_ERR(data->proc_file);
- if(IS_ERR(data->proc_file))
+ if (IS_ERR(data->proc_file))
goto out_free;
file->private_data = data;
- return(0);
+ return 0;
out_free:
kfree(data);
out:
- return(err);
+ return err;
}
static loff_t hppfs_llseek(struct file *file, loff_t off, int where)
@@ -564,13 +526,13 @@ static loff_t hppfs_llseek(struct file *file, loff_t off, int where)
loff_t ret;
llseek = proc_file->f_path.dentry->d_inode->i_fop->llseek;
- if(llseek != NULL){
+ if (llseek != NULL) {
ret = (*llseek)(proc_file, off, where);
- if(ret < 0)
- return(ret);
+ if (ret < 0)
+ return ret;
}
- return(default_llseek(file, off, where));
+ return default_llseek(file, off, where);
}
static const struct file_operations hppfs_file_fops = {
@@ -592,11 +554,11 @@ static int hppfs_filldir(void *d, const char *name, int size,
{
struct hppfs_dirent *dirent = d;
- if(file_removed(dirent->dentry, name))
- return(0);
+ if (file_removed(dirent->dentry, name))
+ return 0;
- return((*dirent->filldir)(dirent->vfs_dirent, name, size, offset,
- inode, type));
+ return (*dirent->filldir)(dirent->vfs_dirent, name, size, offset,
+ inode, type);
}
static int hppfs_readdir(struct file *file, void *ent, filldir_t filldir)
@@ -607,7 +569,8 @@ static int hppfs_readdir(struct file *file, void *ent, filldir_t filldir)
struct hppfs_dirent dirent = ((struct hppfs_dirent)
{ .vfs_dirent = ent,
.filldir = filldir,
- .dentry = file->f_path.dentry } );
+ .dentry = file->f_path.dentry
+ });
int err;
readdir = proc_file->f_path.dentry->d_inode->i_fop->readdir;
@@ -616,12 +579,12 @@ static int hppfs_readdir(struct file *file, void *ent, filldir_t filldir)
err = (*readdir)(proc_file, &dirent, hppfs_filldir);
file->f_pos = proc_file->f_pos;
- return(err);
+ return err;
}
static int hppfs_fsync(struct file *file, struct dentry *dentry, int datasync)
{
- return(0);
+ return 0;
}
static const struct file_operations hppfs_dir_fops = {
@@ -639,7 +602,7 @@ static int hppfs_statfs(struct dentry *dentry, struct kstatfs *sf)
sf->f_files = 0;
sf->f_ffree = 0;
sf->f_type = HPPFS_SUPER_MAGIC;
- return(0);
+ return 0;
}
static struct inode *hppfs_alloc_inode(struct super_block *sb)
@@ -647,12 +610,12 @@ static struct inode *hppfs_alloc_inode(struct super_block *sb)
struct hppfs_inode_info *hi;
hi = kmalloc(sizeof(*hi), GFP_KERNEL);
- if(hi == NULL)
- return(NULL);
+ if (!hi)
+ return NULL;
- *hi = ((struct hppfs_inode_info) { .proc_dentry = NULL });
+ hi->proc_dentry = NULL;
inode_init_once(&hi->vfs_inode);
- return(&hi->vfs_inode);
+ return &hi->vfs_inode;
}
void hppfs_delete_inode(struct inode *ino)
@@ -665,21 +628,31 @@ static void hppfs_destroy_inode(struct inode *inode)
kfree(HPPFS_I(inode));
}
+static void hppfs_put_super(struct super_block *sb)
+{
+ mntput(sb->s_fs_info);
+}
+
static const struct super_operations hppfs_sbops = {
.alloc_inode = hppfs_alloc_inode,
.destroy_inode = hppfs_destroy_inode,
.delete_inode = hppfs_delete_inode,
.statfs = hppfs_statfs,
+ .put_super = hppfs_put_super,
};
-static int hppfs_readlink(struct dentry *dentry, char __user *buffer, int buflen)
+static int hppfs_readlink(struct dentry *dentry, char __user *buffer,
+ int buflen)
{
struct file *proc_file;
struct dentry *proc_dentry;
+ struct vfsmount *proc_mnt;
int ret;
proc_dentry = HPPFS_I(dentry->d_inode)->proc_dentry;
- proc_file = dentry_open(dget(proc_dentry), NULL, O_RDONLY);
+ proc_mnt = dentry->d_sb->s_fs_info;
+
+ proc_file = dentry_open(dget(proc_dentry), mntget(proc_mnt), O_RDONLY);
if (IS_ERR(proc_file))
return PTR_ERR(proc_file);
@@ -694,10 +667,13 @@ static void* hppfs_follow_link(struct dentry *dentry, struct nameidata *nd)
{
struct file *proc_file;
struct dentry *proc_dentry;
+ struct vfsmount *proc_mnt;
void *ret;
proc_dentry = HPPFS_I(dentry->d_inode)->proc_dentry;
- proc_file = dentry_open(dget(proc_dentry), NULL, O_RDONLY);
+ proc_mnt = dentry->d_sb->s_fs_info;
+
+ proc_file = dentry_open(dget(proc_dentry), mntget(proc_mnt), O_RDONLY);
if (IS_ERR(proc_file))
return proc_file;
@@ -717,70 +693,72 @@ static const struct inode_operations hppfs_link_iops = {
.follow_link = hppfs_follow_link,
};
-static int init_inode(struct inode *inode, struct dentry *dentry)
+static struct inode *get_inode(struct super_block *sb, struct dentry *dentry)
{
- if(S_ISDIR(dentry->d_inode->i_mode)){
+ struct inode *proc_ino = dentry->d_inode;
+ struct inode *inode = new_inode(sb);
+
+ if (!inode)
+ return ERR_PTR(-ENOMEM);
+
+ if (S_ISDIR(dentry->d_inode->i_mode)) {
inode->i_op = &hppfs_dir_iops;
inode->i_fop = &hppfs_dir_fops;
- }
- else if(S_ISLNK(dentry->d_inode->i_mode)){
+ } else if (S_ISLNK(dentry->d_inode->i_mode)) {
inode->i_op = &hppfs_link_iops;
inode->i_fop = &hppfs_file_fops;
- }
- else {
+ } else {
inode->i_op = &hppfs_file_iops;
inode->i_fop = &hppfs_file_fops;
}
HPPFS_I(inode)->proc_dentry = dentry;
- return(0);
+ inode->i_uid = proc_ino->i_uid;
+ inode->i_gid = proc_ino->i_gid;
+ inode->i_atime = proc_ino->i_atime;
+ inode->i_mtime = proc_ino->i_mtime;
+ inode->i_ctime = proc_ino->i_ctime;
+ inode->i_ino = proc_ino->i_ino;
+ inode->i_mode = proc_ino->i_mode;
+ inode->i_nlink = proc_ino->i_nlink;
+ inode->i_size = proc_ino->i_size;
+ inode->i_blocks = proc_ino->i_blocks;
+
+ return 0;
}
static int hppfs_fill_super(struct super_block *sb, void *d, int silent)
{
struct inode *root_inode;
- struct file_system_type *procfs;
- struct super_block *proc_sb;
- int err;
+ struct vfsmount *proc_mnt;
+ int err = -ENOENT;
- err = -ENOENT;
- procfs = get_fs_type("proc");
- if(procfs == NULL)
+ proc_mnt = do_kern_mount("proc", 0, "proc", NULL);
+ if (IS_ERR(proc_mnt))
goto out;
- if(list_empty(&procfs->fs_supers))
- goto out;
-
- proc_sb = list_entry(procfs->fs_supers.next, struct super_block,
- s_instances);
-
sb->s_blocksize = 1024;
sb->s_blocksize_bits = 10;
sb->s_magic = HPPFS_SUPER_MAGIC;
sb->s_op = &hppfs_sbops;
-
- root_inode = hppfs_iget(sb);
- if (IS_ERR(root_inode)) {
- err = PTR_ERR(root_inode);
- goto out;
- }
-
- err = init_inode(root_inode, proc_sb->s_root);
- if(err)
- goto out_put;
+ sb->s_fs_info = proc_mnt;
err = -ENOMEM;
- sb->s_root = d_alloc_root(root_inode);
- if(sb->s_root == NULL)
- goto out_put;
+ root_inode = get_inode(sb, proc_mnt->mnt_sb->s_root);
+ if (!root_inode)
+ goto out_mntput;
- hppfs_read_inode(root_inode);
+ sb->s_root = d_alloc_root(root_inode);
+ if (!sb->s_root)
+ goto out_iput;
- return(0);
+ return 0;
- out_put:
+ out_iput:
iput(root_inode);
+ out_mntput:
+ mntput(proc_mnt);
out:
return(err);
}
@@ -802,7 +780,7 @@ static struct file_system_type hppfs_type = {
static int __init init_hppfs(void)
{
- return(register_filesystem(&hppfs_type));
+ return register_filesystem(&hppfs_type);
}
static void __exit exit_hppfs(void)
@@ -813,14 +791,3 @@ static void __exit exit_hppfs(void)
module_init(init_hppfs)
module_exit(exit_hppfs)
MODULE_LICENSE("GPL");
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index eee9487ae47..6846785fe90 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -954,7 +954,7 @@ struct file *hugetlb_file_setup(const char *name, size_t size)
FMODE_WRITE | FMODE_READ,
&hugetlbfs_file_operations);
if (!file)
- goto out_inode;
+ goto out_dentry; /* inode is already attached */
return file;
diff --git a/fs/isofs/compress.c b/fs/isofs/compress.c
index 37dbd640478..defb932eee9 100644
--- a/fs/isofs/compress.c
+++ b/fs/isofs/compress.c
@@ -72,6 +72,17 @@ static int zisofs_readpage(struct file *file, struct page *page)
offset = index & ~zisofs_block_page_mask;
blockindex = offset >> zisofs_block_page_shift;
maxpage = (inode->i_size + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
+
+ /*
+ * If this page is wholly outside i_size we just return zero;
+ * do_generic_file_read() will handle this for us
+ */
+ if (page->index >= maxpage) {
+ SetPageUptodate(page);
+ unlock_page(page);
+ return 0;
+ }
+
maxpage = min(zisofs_block_pages, maxpage-offset);
for ( i = 0 ; i < maxpage ; i++, offset++ ) {
diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c
index 3943a8905eb..0e081d5f32e 100644
--- a/fs/jbd/journal.c
+++ b/fs/jbd/journal.c
@@ -697,13 +697,14 @@ fail:
*/
/**
- * journal_t * journal_init_dev() - creates an initialises a journal structure
+ * journal_t * journal_init_dev() - creates and initialises a journal structure
* @bdev: Block device on which to create the journal
* @fs_dev: Device which hold journalled filesystem for this journal.
* @start: Block nr Start of journal.
* @len: Length of the journal in blocks.
* @blocksize: blocksize of journalling device
- * @returns: a newly created journal_t *
+ *
+ * Returns: a newly created journal_t *
*
* journal_init_dev creates a journal which maps a fixed contiguous
* range of blocks on an arbitrary block device.
@@ -1619,14 +1620,14 @@ static int journal_init_journal_head_cache(void)
{
int retval;
- J_ASSERT(journal_head_cache == 0);
+ J_ASSERT(journal_head_cache == NULL);
journal_head_cache = kmem_cache_create("journal_head",
sizeof(struct journal_head),
0, /* offset */
SLAB_TEMPORARY, /* flags */
NULL); /* ctor */
retval = 0;
- if (journal_head_cache == 0) {
+ if (!journal_head_cache) {
retval = -ENOMEM;
printk(KERN_EMERG "JBD: no memory for journal_head cache\n");
}
diff --git a/fs/jbd/recovery.c b/fs/jbd/recovery.c
index 2b8edf4d6ea..43bc5e5ed06 100644
--- a/fs/jbd/recovery.c
+++ b/fs/jbd/recovery.c
@@ -478,7 +478,7 @@ static int do_one_pass(journal_t *journal,
memcpy(nbh->b_data, obh->b_data,
journal->j_blocksize);
if (flags & JFS_FLAG_ESCAPE) {
- *((__be32 *)bh->b_data) =
+ *((__be32 *)nbh->b_data) =
cpu_to_be32(JFS_MAGIC_NUMBER);
}
diff --git a/fs/jbd/revoke.c b/fs/jbd/revoke.c
index ad2eacf570c..d5f8eee7c88 100644
--- a/fs/jbd/revoke.c
+++ b/fs/jbd/revoke.c
@@ -173,13 +173,13 @@ int __init journal_init_revoke_caches(void)
0,
SLAB_HWCACHE_ALIGN|SLAB_TEMPORARY,
NULL);
- if (revoke_record_cache == 0)
+ if (!revoke_record_cache)
return -ENOMEM;
revoke_table_cache = kmem_cache_create("revoke_table",
sizeof(struct jbd_revoke_table_s),
0, SLAB_TEMPORARY, NULL);
- if (revoke_table_cache == 0) {
+ if (!revoke_table_cache) {
kmem_cache_destroy(revoke_record_cache);
revoke_record_cache = NULL;
return -ENOMEM;
diff --git a/fs/jbd/transaction.c b/fs/jbd/transaction.c
index c6cbb6cd59b..2c9e8f5d13a 100644
--- a/fs/jbd/transaction.c
+++ b/fs/jbd/transaction.c
@@ -1426,7 +1426,8 @@ int journal_stop(handle_t *handle)
return err;
}
-/**int journal_force_commit() - force any uncommitted transactions
+/**
+ * int journal_force_commit() - force any uncommitted transactions
* @journal: journal to force
*
* For synchronous operations: force any uncommitted transactions
@@ -1903,13 +1904,12 @@ zap_buffer_unlocked:
}
/**
- * void journal_invalidatepage()
- * @journal: journal to use for flush...
+ * void journal_invalidatepage() - invalidate a journal page
+ * @journal: journal to use for flush
* @page: page to flush
* @offset: length of page to invalidate.
*
* Reap page buffers containing data after offset in page.
- *
*/
void journal_invalidatepage(journal_t *journal,
struct page *page,
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index 96ba846992e..954cff001df 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -219,7 +219,7 @@ static int jbd2_journal_start_thread(journal_t *journal)
if (IS_ERR(t))
return PTR_ERR(t);
- wait_event(journal->j_wait_done_commit, journal->j_task != 0);
+ wait_event(journal->j_wait_done_commit, journal->j_task != NULL);
return 0;
}
@@ -231,7 +231,7 @@ static void journal_kill_thread(journal_t *journal)
while (journal->j_task) {
wake_up(&journal->j_wait_commit);
spin_unlock(&journal->j_state_lock);
- wait_event(journal->j_wait_done_commit, journal->j_task == 0);
+ wait_event(journal->j_wait_done_commit, journal->j_task == NULL);
spin_lock(&journal->j_state_lock);
}
spin_unlock(&journal->j_state_lock);
@@ -1969,14 +1969,14 @@ static int journal_init_jbd2_journal_head_cache(void)
{
int retval;
- J_ASSERT(jbd2_journal_head_cache == 0);
+ J_ASSERT(jbd2_journal_head_cache == NULL);
jbd2_journal_head_cache = kmem_cache_create("jbd2_journal_head",
sizeof(struct journal_head),
0, /* offset */
SLAB_TEMPORARY, /* flags */
NULL); /* ctor */
retval = 0;
- if (jbd2_journal_head_cache == 0) {
+ if (!jbd2_journal_head_cache) {
retval = -ENOMEM;
printk(KERN_EMERG "JBD: no memory for journal_head cache\n");
}
@@ -2002,14 +2002,14 @@ static struct journal_head *journal_alloc_journal_head(void)
atomic_inc(&nr_journal_heads);
#endif
ret = kmem_cache_alloc(jbd2_journal_head_cache, GFP_NOFS);
- if (ret == 0) {
+ if (!ret) {
jbd_debug(1, "out of memory for journal_head\n");
if (time_after(jiffies, last_warning + 5*HZ)) {
printk(KERN_NOTICE "ENOMEM in %s, retrying.\n",
__FUNCTION__);
last_warning = jiffies;
}
- while (ret == 0) {
+ while (!ret) {
yield();
ret = kmem_cache_alloc(jbd2_journal_head_cache, GFP_NOFS);
}
diff --git a/fs/jbd2/recovery.c b/fs/jbd2/recovery.c
index 146411387ad..5d0405a9e7c 100644
--- a/fs/jbd2/recovery.c
+++ b/fs/jbd2/recovery.c
@@ -535,7 +535,7 @@ static int do_one_pass(journal_t *journal,
memcpy(nbh->b_data, obh->b_data,
journal->j_blocksize);
if (flags & JBD2_FLAG_ESCAPE) {
- *((__be32 *)bh->b_data) =
+ *((__be32 *)nbh->b_data) =
cpu_to_be32(JBD2_MAGIC_NUMBER);
}
diff --git a/fs/jbd2/revoke.c b/fs/jbd2/revoke.c
index df36f42e19e..2e1453a5e99 100644
--- a/fs/jbd2/revoke.c
+++ b/fs/jbd2/revoke.c
@@ -174,13 +174,13 @@ int __init jbd2_journal_init_revoke_caches(void)
0,
SLAB_HWCACHE_ALIGN|SLAB_TEMPORARY,
NULL);
- if (jbd2_revoke_record_cache == 0)
+ if (!jbd2_revoke_record_cache)
return -ENOMEM;
jbd2_revoke_table_cache = kmem_cache_create("jbd2_revoke_table",
sizeof(struct jbd2_revoke_table_s),
0, SLAB_TEMPORARY, NULL);
- if (jbd2_revoke_table_cache == 0) {
+ if (!jbd2_revoke_table_cache) {
kmem_cache_destroy(jbd2_revoke_record_cache);
jbd2_revoke_record_cache = NULL;
return -ENOMEM;
diff --git a/fs/locks.c b/fs/locks.c
index f36f0e61558..d83fab1b77b 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -1275,13 +1275,13 @@ out:
EXPORT_SYMBOL(__break_lease);
/**
- * lease_get_mtime
+ * lease_get_mtime - get the last modified time of an inode
* @inode: the inode
* @time: pointer to a timespec which will contain the last modified time
*
* This is to force NFS clients to flush their caches for files with
* exclusive leases. The justification is that if someone has an
- * exclusive lease, then they could be modifiying it.
+ * exclusive lease, then they could be modifying it.
*/
void lease_get_mtime(struct inode *inode, struct timespec *time)
{
diff --git a/fs/namei.c b/fs/namei.c
index 941c8e8228c..8cf9bb9c2fc 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -106,7 +106,7 @@
* any extra contention...
*/
-static int link_path_walk(const char *name, struct nameidata *nd);
+static int __link_path_walk(const char *name, struct nameidata *nd);
/* In order to reduce some races, while at the same time doing additional
* checking and hopefully speeding things up, we copy filenames to the
@@ -563,6 +563,37 @@ walk_init_root(const char *name, struct nameidata *nd)
return 1;
}
+/*
+ * Wrapper to retry pathname resolution whenever the underlying
+ * file system returns an ESTALE.
+ *
+ * Retry the whole path once, forcing real lookup requests
+ * instead of relying on the dcache.
+ */
+static __always_inline int link_path_walk(const char *name, struct nameidata *nd)
+{
+ struct path save = nd->path;
+ int result;
+
+ /* make sure the stuff we saved doesn't go away */
+ dget(save.dentry);
+ mntget(save.mnt);
+
+ result = __link_path_walk(name, nd);
+ if (result == -ESTALE) {
+ /* nd->path had been dropped */
+ nd->path = save;
+ dget(nd->path.dentry);
+ mntget(nd->path.mnt);
+ nd->flags |= LOOKUP_REVAL;
+ result = __link_path_walk(name, nd);
+ }
+
+ path_put(&save);
+
+ return result;
+}
+
static __always_inline int __vfs_follow_link(struct nameidata *nd, const char *link)
{
int res = 0;
@@ -1020,36 +1051,6 @@ return_err:
return err;
}
-/*
- * Wrapper to retry pathname resolution whenever the underlying
- * file system returns an ESTALE.
- *
- * Retry the whole path once, forcing real lookup requests
- * instead of relying on the dcache.
- */
-static int link_path_walk(const char *name, struct nameidata *nd)
-{
- struct nameidata save = *nd;
- int result;
-
- /* make sure the stuff we saved doesn't go away */
- dget(save.path.dentry);
- mntget(save.path.mnt);
-
- result = __link_path_walk(name, nd);
- if (result == -ESTALE) {
- *nd = save;
- dget(nd->path.dentry);
- mntget(nd->path.mnt);
- nd->flags |= LOOKUP_REVAL;
- result = __link_path_walk(name, nd);
- }
-
- path_put(&save.path);
-
- return result;
-}
-
static int path_walk(const char *name, struct nameidata *nd)
{
current->total_link_count = 0;
@@ -1364,13 +1365,13 @@ static int __lookup_one_len(const char *name, struct qstr *this,
}
/**
- * lookup_one_len: filesystem helper to lookup single pathname component
+ * lookup_one_len - filesystem helper to lookup single pathname component
* @name: pathname component to lookup
* @base: base directory to lookup from
* @len: maximum length @len should be interpreted to
*
- * Note that this routine is purely a helper for filesystem useage and should
- * not be called by generic code. Also note that by using this function to
+ * Note that this routine is purely a helper for filesystem usage and should
+ * not be called by generic code. Also note that by using this function the
* nameidata argument is passed to the filesystem methods and a filesystem
* using this helper needs to be prepared for that.
*/
diff --git a/fs/namespace.c b/fs/namespace.c
index 7953c96a207..94f026ec990 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -155,15 +155,15 @@ static void __touch_mnt_namespace(struct mnt_namespace *ns)
}
}
-static void detach_mnt(struct vfsmount *mnt, struct nameidata *old_nd)
+static void detach_mnt(struct vfsmount *mnt, struct path *old_path)
{
- old_nd->path.dentry = mnt->mnt_mountpoint;
- old_nd->path.mnt = mnt->mnt_parent;
+ old_path->dentry = mnt->mnt_mountpoint;
+ old_path->mnt = mnt->mnt_parent;
mnt->mnt_parent = mnt;
mnt->mnt_mountpoint = mnt->mnt_root;
list_del_init(&mnt->mnt_child);
list_del_init(&mnt->mnt_hash);
- old_nd->path.dentry->d_mounted--;
+ old_path->dentry->d_mounted--;
}
void mnt_set_mountpoint(struct vfsmount *mnt, struct dentry *dentry,
@@ -174,12 +174,12 @@ void mnt_set_mountpoint(struct vfsmount *mnt, struct dentry *dentry,
dentry->d_mounted++;
}
-static void attach_mnt(struct vfsmount *mnt, struct nameidata *nd)
+static void attach_mnt(struct vfsmount *mnt, struct path *path)
{
- mnt_set_mountpoint(nd->path.mnt, nd->path.dentry, mnt);
+ mnt_set_mountpoint(path->mnt, path->dentry, mnt);
list_add_tail(&mnt->mnt_hash, mount_hashtable +
- hash(nd->path.mnt, nd->path.dentry));
- list_add_tail(&mnt->mnt_child, &nd->path.mnt->mnt_mounts);
+ hash(path->mnt, path->dentry));
+ list_add_tail(&mnt->mnt_child, &path->mnt->mnt_mounts);
}
/*
@@ -262,10 +262,8 @@ static struct vfsmount *clone_mnt(struct vfsmount *old, struct dentry *root,
/* stick the duplicate mount on the same expiry list
* as the original if that was on one */
if (flag & CL_EXPIRE) {
- spin_lock(&vfsmount_lock);
if (!list_empty(&old->mnt_expire))
list_add(&mnt->mnt_expire, &old->mnt_expire);
- spin_unlock(&vfsmount_lock);
}
}
return mnt;
@@ -548,6 +546,7 @@ void release_mounts(struct list_head *head)
m = mnt->mnt_parent;
mnt->mnt_mountpoint = mnt->mnt_root;
mnt->mnt_parent = mnt;
+ m->mnt_ghosts--;
spin_unlock(&vfsmount_lock);
dput(dentry);
mntput(m);
@@ -572,12 +571,16 @@ void umount_tree(struct vfsmount *mnt, int propagate, struct list_head *kill)
__touch_mnt_namespace(p->mnt_ns);
p->mnt_ns = NULL;
list_del_init(&p->mnt_child);
- if (p->mnt_parent != p)
+ if (p->mnt_parent != p) {
+ p->mnt_parent->mnt_ghosts++;
p->mnt_mountpoint->d_mounted--;
+ }
change_mnt_propagation(p, MS_PRIVATE);
}
}
+static void shrink_submounts(struct vfsmount *mnt, struct list_head *umounts);
+
static int do_umount(struct vfsmount *mnt, int flags)
{
struct super_block *sb = mnt->mnt_sb;
@@ -650,6 +653,9 @@ static int do_umount(struct vfsmount *mnt, int flags)
spin_lock(&vfsmount_lock);
event++;
+ if (!(flags & MNT_DETACH))
+ shrink_submounts(mnt, &umount_list);
+
retval = -EBUSY;
if (flags & MNT_DETACH || !propagate_mount_busy(mnt, 2)) {
if (!list_empty(&mnt->mnt_list))
@@ -744,7 +750,7 @@ struct vfsmount *copy_tree(struct vfsmount *mnt, struct dentry *dentry,
int flag)
{
struct vfsmount *res, *p, *q, *r, *s;
- struct nameidata nd;
+ struct path path;
if (!(flag & CL_COPY_ALL) && IS_MNT_UNBINDABLE(mnt))
return NULL;
@@ -769,14 +775,14 @@ struct vfsmount *copy_tree(struct vfsmount *mnt, struct dentry *dentry,
q = q->mnt_parent;
}
p = s;
- nd.path.mnt = q;
- nd.path.dentry = p->mnt_mountpoint;
+ path.mnt = q;
+ path.dentry = p->mnt_mountpoint;
q = clone_mnt(p, p->mnt_root, flag);
if (!q)
goto Enomem;
spin_lock(&vfsmount_lock);
list_add_tail(&q->mnt_list, &res->mnt_list);
- attach_mnt(q, &nd);
+ attach_mnt(q, &path);
spin_unlock(&vfsmount_lock);
}
}
@@ -876,11 +882,11 @@ void drop_collected_mounts(struct vfsmount *mnt)
* in allocations.
*/
static int attach_recursive_mnt(struct vfsmount *source_mnt,
- struct nameidata *nd, struct nameidata *parent_nd)
+ struct path *path, struct path *parent_path)
{
LIST_HEAD(tree_list);
- struct vfsmount *dest_mnt = nd->path.mnt;
- struct dentry *dest_dentry = nd->path.dentry;
+ struct vfsmount *dest_mnt = path->mnt;
+ struct dentry *dest_dentry = path->dentry;
struct vfsmount *child, *p;
if (propagate_mnt(dest_mnt, dest_dentry, source_mnt, &tree_list))
@@ -892,9 +898,9 @@ static int attach_recursive_mnt(struct vfsmount *source_mnt,
}
spin_lock(&vfsmount_lock);
- if (parent_nd) {
- detach_mnt(source_mnt, parent_nd);
- attach_mnt(source_mnt, nd);
+ if (parent_path) {
+ detach_mnt(source_mnt, parent_path);
+ attach_mnt(source_mnt, path);
touch_mnt_namespace(current->nsproxy->mnt_ns);
} else {
mnt_set_mountpoint(dest_mnt, dest_dentry, source_mnt);
@@ -930,7 +936,7 @@ static int graft_tree(struct vfsmount *mnt, struct nameidata *nd)
err = -ENOENT;
if (IS_ROOT(nd->path.dentry) || !d_unhashed(nd->path.dentry))
- err = attach_recursive_mnt(mnt, nd, NULL);
+ err = attach_recursive_mnt(mnt, &nd->path, NULL);
out_unlock:
mutex_unlock(&nd->path.dentry->d_inode->i_mutex);
if (!err)
@@ -1059,7 +1065,8 @@ static inline int tree_contains_unbindable(struct vfsmount *mnt)
*/
static noinline int do_move_mount(struct nameidata *nd, char *old_name)
{
- struct nameidata old_nd, parent_nd;
+ struct nameidata old_nd;
+ struct path parent_path;
struct vfsmount *p;
int err = 0;
if (!capable(CAP_SYS_ADMIN))
@@ -1114,21 +1121,19 @@ static noinline int do_move_mount(struct nameidata *nd, char *old_name)
if (p == old_nd.path.mnt)
goto out1;
- err = attach_recursive_mnt(old_nd.path.mnt, nd, &parent_nd);
+ err = attach_recursive_mnt(old_nd.path.mnt, &nd->path, &parent_path);
if (err)
goto out1;
- spin_lock(&vfsmount_lock);
/* if the mount is moved, it should no longer be expire
* automatically */
list_del_init(&old_nd.path.mnt->mnt_expire);
- spin_unlock(&vfsmount_lock);
out1:
mutex_unlock(&nd->path.dentry->d_inode->i_mutex);
out:
up_write(&namespace_sem);
if (!err)
- path_put(&parent_nd.path);
+ path_put(&parent_path);
path_put(&old_nd.path);
return err;
}
@@ -1189,12 +1194,9 @@ int do_add_mount(struct vfsmount *newmnt, struct nameidata *nd,
if ((err = graft_tree(newmnt, nd)))
goto unlock;
- if (fslist) {
- /* add to the specified expiration list */
- spin_lock(&vfsmount_lock);
+ if (fslist) /* add to the specified expiration list */
list_add_tail(&newmnt->mnt_expire, fslist);
- spin_unlock(&vfsmount_lock);
- }
+
up_write(&namespace_sem);
return 0;
@@ -1206,75 +1208,6 @@ unlock:
EXPORT_SYMBOL_GPL(do_add_mount);
-static void expire_mount(struct vfsmount *mnt, struct list_head *mounts,
- struct list_head *umounts)
-{
- spin_lock(&vfsmount_lock);
-
- /*
- * Check if mount is still attached, if not, let whoever holds it deal
- * with the sucker
- */
- if (mnt->mnt_parent == mnt) {
- spin_unlock(&vfsmount_lock);
- return;
- }
-
- /*
- * Check that it is still dead: the count should now be 2 - as
- * contributed by the vfsmount parent and the mntget above
- */
- if (!propagate_mount_busy(mnt, 2)) {
- /* delete from the namespace */
- touch_mnt_namespace(mnt->mnt_ns);
- list_del_init(&mnt->mnt_list);
- mnt->mnt_ns = NULL;
- umount_tree(mnt, 1, umounts);
- spin_unlock(&vfsmount_lock);
- } else {
- /*
- * Someone brought it back to life whilst we didn't have any
- * locks held so return it to the expiration list
- */
- list_add_tail(&mnt->mnt_expire, mounts);
- spin_unlock(&vfsmount_lock);
- }
-}
-
-/*
- * go through the vfsmounts we've just consigned to the graveyard to
- * - check that they're still dead
- * - delete the vfsmount from the appropriate namespace under lock
- * - dispose of the corpse
- */
-static void expire_mount_list(struct list_head *graveyard, struct list_head *mounts)
-{
- struct mnt_namespace *ns;
- struct vfsmount *mnt;
-
- while (!list_empty(graveyard)) {
- LIST_HEAD(umounts);
- mnt = list_first_entry(graveyard, struct vfsmount, mnt_expire);
- list_del_init(&mnt->mnt_expire);
-
- /* don't do anything if the namespace is dead - all the
- * vfsmounts from it are going away anyway */
- ns = mnt->mnt_ns;
- if (!ns || !ns->root)
- continue;
- get_mnt_ns(ns);
-
- spin_unlock(&vfsmount_lock);
- down_write(&namespace_sem);
- expire_mount(mnt, mounts, &umounts);
- up_write(&namespace_sem);
- release_mounts(&umounts);
- mntput(mnt);
- put_mnt_ns(ns);
- spin_lock(&vfsmount_lock);
- }
-}
-
/*
* process a list of expirable mountpoints with the intent of discarding any
* mountpoints that aren't in use and haven't been touched since last we came
@@ -1284,10 +1217,12 @@ void mark_mounts_for_expiry(struct list_head *mounts)
{
struct vfsmount *mnt, *next;
LIST_HEAD(graveyard);
+ LIST_HEAD(umounts);
if (list_empty(mounts))
return;
+ down_write(&namespace_sem);
spin_lock(&vfsmount_lock);
/* extract from the expiration list every vfsmount that matches the
@@ -1298,16 +1233,19 @@ void mark_mounts_for_expiry(struct list_head *mounts)
*/
list_for_each_entry_safe(mnt, next, mounts, mnt_expire) {
if (!xchg(&mnt->mnt_expiry_mark, 1) ||
- atomic_read(&mnt->mnt_count) != 1)
+ propagate_mount_busy(mnt, 1))
continue;
-
- mntget(mnt);
list_move(&mnt->mnt_expire, &graveyard);
}
-
- expire_mount_list(&graveyard, mounts);
-
+ while (!list_empty(&graveyard)) {
+ mnt = list_first_entry(&graveyard, struct vfsmount, mnt_expire);
+ touch_mnt_namespace(mnt->mnt_ns);
+ umount_tree(mnt, 1, &umounts);
+ }
spin_unlock(&vfsmount_lock);
+ up_write(&namespace_sem);
+
+ release_mounts(&umounts);
}
EXPORT_SYMBOL_GPL(mark_mounts_for_expiry);
@@ -1343,7 +1281,6 @@ resume:
}
if (!propagate_mount_busy(mnt, 1)) {
- mntget(mnt);
list_move_tail(&mnt->mnt_expire, graveyard);
found++;
}
@@ -1363,22 +1300,22 @@ resume:
* process a list of expirable mountpoints with the intent of discarding any
* submounts of a specific parent mountpoint
*/
-void shrink_submounts(struct vfsmount *mountpoint, struct list_head *mounts)
+static void shrink_submounts(struct vfsmount *mnt, struct list_head *umounts)
{
LIST_HEAD(graveyard);
- int found;
-
- spin_lock(&vfsmount_lock);
+ struct vfsmount *m;
/* extract submounts of 'mountpoint' from the expiration list */
- while ((found = select_submounts(mountpoint, &graveyard)) != 0)
- expire_mount_list(&graveyard, mounts);
-
- spin_unlock(&vfsmount_lock);
+ while (select_submounts(mnt, &graveyard)) {
+ while (!list_empty(&graveyard)) {
+ m = list_first_entry(&graveyard, struct vfsmount,
+ mnt_expire);
+ touch_mnt_namespace(mnt->mnt_ns);
+ umount_tree(mnt, 1, umounts);
+ }
+ }
}
-EXPORT_SYMBOL_GPL(shrink_submounts);
-
/*
* Some copy_from_user() implementations do not return the exact number of
* bytes remaining to copy on a fault. But copy_mount_options() requires that.
@@ -1683,7 +1620,7 @@ void set_fs_pwd(struct fs_struct *fs, struct path *path)
path_put(&old_pwd);
}
-static void chroot_fs_refs(struct nameidata *old_nd, struct nameidata *new_nd)
+static void chroot_fs_refs(struct path *old_root, struct path *new_root)
{
struct task_struct *g, *p;
struct fs_struct *fs;
@@ -1695,12 +1632,12 @@ static void chroot_fs_refs(struct nameidata *old_nd, struct nameidata *new_nd)
if (fs) {
atomic_inc(&fs->count);
task_unlock(p);
- if (fs->root.dentry == old_nd->path.dentry
- && fs->root.mnt == old_nd->path.mnt)
- set_fs_root(fs, &new_nd->path);
- if (fs->pwd.dentry == old_nd->path.dentry
- && fs->pwd.mnt == old_nd->path.mnt)
- set_fs_pwd(fs, &new_nd->path);
+ if (fs->root.dentry == old_root->dentry
+ && fs->root.mnt == old_root->mnt)
+ set_fs_root(fs, new_root);
+ if (fs->pwd.dentry == old_root->dentry
+ && fs->pwd.mnt == old_root->mnt)
+ set_fs_pwd(fs, new_root);
put_fs_struct(fs);
} else
task_unlock(p);
@@ -1737,7 +1674,8 @@ asmlinkage long sys_pivot_root(const char __user * new_root,
const char __user * put_old)
{
struct vfsmount *tmp;
- struct nameidata new_nd, old_nd, parent_nd, root_parent, user_nd;
+ struct nameidata new_nd, old_nd, user_nd;
+ struct path parent_path, root_parent;
int error;
if (!capable(CAP_SYS_ADMIN))
@@ -1811,19 +1749,19 @@ asmlinkage long sys_pivot_root(const char __user * new_root,
goto out3;
} else if (!is_subdir(old_nd.path.dentry, new_nd.path.dentry))
goto out3;
- detach_mnt(new_nd.path.mnt, &parent_nd);
+ detach_mnt(new_nd.path.mnt, &parent_path);
detach_mnt(user_nd.path.mnt, &root_parent);
/* mount old root on put_old */
- attach_mnt(user_nd.path.mnt, &old_nd);
+ attach_mnt(user_nd.path.mnt, &old_nd.path);
/* mount new_root on / */
attach_mnt(new_nd.path.mnt, &root_parent);
touch_mnt_namespace(current->nsproxy->mnt_ns);
spin_unlock(&vfsmount_lock);
- chroot_fs_refs(&user_nd, &new_nd);
+ chroot_fs_refs(&user_nd.path, &new_nd.path);
security_sb_post_pivotroot(&user_nd, &new_nd);
error = 0;
- path_put(&root_parent.path);
- path_put(&parent_nd.path);
+ path_put(&root_parent);
+ path_put(&parent_path);
out2:
mutex_unlock(&old_nd.path.dentry->d_inode->i_mutex);
up_write(&namespace_sem);
diff --git a/fs/nfs/read.c b/fs/nfs/read.c
index 3d7d9631e12..5a70be589bb 100644
--- a/fs/nfs/read.c
+++ b/fs/nfs/read.c
@@ -533,7 +533,10 @@ readpage_async_filler(void *data, struct page *page)
if (len < PAGE_CACHE_SIZE)
zero_user_segment(page, len, PAGE_CACHE_SIZE);
- nfs_pageio_add_request(desc->pgio, new);
+ if (!nfs_pageio_add_request(desc->pgio, new)) {
+ error = desc->pgio->pg_error;
+ goto out_unlock;
+ }
return 0;
out_error:
error = PTR_ERR(new);
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index dd4dfcd632e..f9219024f31 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -589,8 +589,6 @@ static void nfs_umount_begin(struct vfsmount *vfsmnt, int flags)
struct nfs_server *server = NFS_SB(vfsmnt->mnt_sb);
struct rpc_clnt *rpc;
- shrink_submounts(vfsmnt, &nfs_automount_list);
-
if (!(flags & MNT_FORCE))
return;
/* -EIO all pending I/O */
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index 80c61fdb272..bed63416a55 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -39,6 +39,7 @@ static struct nfs_page * nfs_update_request(struct nfs_open_context*,
unsigned int, unsigned int);
static void nfs_pageio_init_write(struct nfs_pageio_descriptor *desc,
struct inode *inode, int ioflags);
+static void nfs_redirty_request(struct nfs_page *req);
static const struct rpc_call_ops nfs_write_partial_ops;
static const struct rpc_call_ops nfs_write_full_ops;
static const struct rpc_call_ops nfs_commit_ops;
@@ -288,7 +289,12 @@ static int nfs_page_async_flush(struct nfs_pageio_descriptor *pgio,
BUG();
}
spin_unlock(&inode->i_lock);
- nfs_pageio_add_request(pgio, req);
+ if (!nfs_pageio_add_request(pgio, req)) {
+ nfs_redirty_request(req);
+ nfs_end_page_writeback(page);
+ nfs_clear_page_tag_locked(req);
+ return pgio->pg_error;
+ }
return 0;
}
diff --git a/fs/open.c b/fs/open.c
index 54198538b67..a4b12022eda 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -903,6 +903,18 @@ struct file *dentry_open(struct dentry *dentry, struct vfsmount *mnt, int flags)
int error;
struct file *f;
+ /*
+ * We must always pass in a valid mount pointer. Historically
+ * callers got away with not passing it, but we must enforce this at
+ * the earliest possible point now to avoid strange problems deep in the
+ * filesystem stack.
+ */
+ if (!mnt) {
+ printk(KERN_WARNING "%s called with NULL vfsmount\n", __func__);
+ dump_stack();
+ return ERR_PTR(-EINVAL);
+ }
+
error = -ENFILE;
f = get_empty_filp();
if (f == NULL) {
diff --git a/fs/pipe.c b/fs/pipe.c
index 3c185b6527b..8be381bbcb5 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -957,13 +957,10 @@ struct file *create_write_pipe(void)
struct dentry *dentry;
struct qstr name = { .name = "" };
- f = get_empty_filp();
- if (!f)
- return ERR_PTR(-ENFILE);
err = -ENFILE;
inode = get_pipe_inode();
if (!inode)
- goto err_file;
+ goto err;
err = -ENOMEM;
dentry = d_alloc(pipe_mnt->mnt_sb->s_root, &name);
@@ -978,22 +975,24 @@ struct file *create_write_pipe(void)
*/
dentry->d_flags &= ~DCACHE_UNHASHED;
d_instantiate(dentry, inode);
- f->f_path.mnt = mntget(pipe_mnt);
- f->f_path.dentry = dentry;
+
+ err = -ENFILE;
+ f = alloc_file(pipe_mnt, dentry, FMODE_WRITE, &write_pipe_fops);
+ if (!f)
+ goto err_dentry;
f->f_mapping = inode->i_mapping;
f->f_flags = O_WRONLY;
- f->f_op = &write_pipe_fops;
- f->f_mode = FMODE_WRITE;
f->f_version = 0;
return f;
+ err_dentry:
+ dput(dentry);
err_inode:
free_pipe_info(inode);
iput(inode);
- err_file:
- put_filp(f);
+ err:
return ERR_PTR(err);
}
diff --git a/fs/pnode.c b/fs/pnode.c
index 05ba692bc54..1d8f5447f3f 100644
--- a/fs/pnode.c
+++ b/fs/pnode.c
@@ -225,7 +225,7 @@ out:
*/
static inline int do_refcount_check(struct vfsmount *mnt, int count)
{
- int mycount = atomic_read(&mnt->mnt_count);
+ int mycount = atomic_read(&mnt->mnt_count) - mnt->mnt_ghosts;
return (mycount > count);
}
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 770de444eba..81d7d145292 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -1036,6 +1036,26 @@ static const struct file_operations proc_loginuid_operations = {
.read = proc_loginuid_read,
.write = proc_loginuid_write,
};
+
+static ssize_t proc_sessionid_read(struct file * file, char __user * buf,
+ size_t count, loff_t *ppos)
+{
+ struct inode * inode = file->f_path.dentry->d_inode;
+ struct task_struct *task = get_proc_task(inode);
+ ssize_t length;
+ char tmpbuf[TMPBUFLEN];
+
+ if (!task)
+ return -ESRCH;
+ length = scnprintf(tmpbuf, TMPBUFLEN, "%u",
+ audit_get_sessionid(task));
+ put_task_struct(task);
+ return simple_read_from_buffer(buf, count, ppos, tmpbuf, length);
+}
+
+static const struct file_operations proc_sessionid_operations = {
+ .read = proc_sessionid_read,
+};
#endif
#ifdef CONFIG_FAULT_INJECTION
@@ -2319,6 +2339,7 @@ static const struct pid_entry tgid_base_stuff[] = {
REG("oom_adj", S_IRUGO|S_IWUSR, oom_adjust),
#ifdef CONFIG_AUDITSYSCALL
REG("loginuid", S_IWUSR|S_IRUGO, loginuid),
+ REG("sessionid", S_IRUSR, sessionid),
#endif
#ifdef CONFIG_FAULT_INJECTION
REG("make-it-fail", S_IRUGO|S_IWUSR, fault_inject),
@@ -2649,6 +2670,7 @@ static const struct pid_entry tid_base_stuff[] = {
REG("oom_adj", S_IRUGO|S_IWUSR, oom_adjust),
#ifdef CONFIG_AUDITSYSCALL
REG("loginuid", S_IWUSR|S_IRUGO, loginuid),
+ REG("sessionid", S_IRUSR, sessionid),
#endif
#ifdef CONFIG_FAULT_INJECTION
REG("make-it-fail", S_IRUGO|S_IWUSR, fault_inject),
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index 4206454734e..9dfb5ff2420 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -527,13 +527,21 @@ struct pagemapread {
char __user *out, *end;
};
-#define PM_ENTRY_BYTES sizeof(u64)
-#define PM_RESERVED_BITS 3
-#define PM_RESERVED_OFFSET (64 - PM_RESERVED_BITS)
-#define PM_RESERVED_MASK (((1LL<<PM_RESERVED_BITS)-1) << PM_RESERVED_OFFSET)
-#define PM_SPECIAL(nr) (((nr) << PM_RESERVED_OFFSET) & PM_RESERVED_MASK)
-#define PM_NOT_PRESENT PM_SPECIAL(1LL)
-#define PM_SWAP PM_SPECIAL(2LL)
+#define PM_ENTRY_BYTES sizeof(u64)
+#define PM_STATUS_BITS 3
+#define PM_STATUS_OFFSET (64 - PM_STATUS_BITS)
+#define PM_STATUS_MASK (((1LL << PM_STATUS_BITS) - 1) << PM_STATUS_OFFSET)
+#define PM_STATUS(nr) (((nr) << PM_STATUS_OFFSET) & PM_STATUS_MASK)
+#define PM_PSHIFT_BITS 6
+#define PM_PSHIFT_OFFSET (PM_STATUS_OFFSET - PM_PSHIFT_BITS)
+#define PM_PSHIFT_MASK (((1LL << PM_PSHIFT_BITS) - 1) << PM_PSHIFT_OFFSET)
+#define PM_PSHIFT(x) (((u64) (x) << PM_PSHIFT_OFFSET) & PM_PSHIFT_MASK)
+#define PM_PFRAME_MASK ((1LL << PM_PSHIFT_OFFSET) - 1)
+#define PM_PFRAME(x) ((x) & PM_PFRAME_MASK)
+
+#define PM_PRESENT PM_STATUS(4LL)
+#define PM_SWAP PM_STATUS(2LL)
+#define PM_NOT_PRESENT PM_PSHIFT(PAGE_SHIFT)
#define PM_END_OF_BUFFER 1
static int add_to_pagemap(unsigned long addr, u64 pfn,
@@ -574,7 +582,7 @@ static int pagemap_pte_hole(unsigned long start, unsigned long end,
u64 swap_pte_to_pagemap_entry(pte_t pte)
{
swp_entry_t e = pte_to_swp_entry(pte);
- return PM_SWAP | swp_type(e) | (swp_offset(e) << MAX_SWAPFILES_SHIFT);
+ return swp_type(e) | (swp_offset(e) << MAX_SWAPFILES_SHIFT);
}
static int pagemap_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end,
@@ -588,9 +596,11 @@ static int pagemap_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end,
u64 pfn = PM_NOT_PRESENT;
pte = pte_offset_map(pmd, addr);
if (is_swap_pte(*pte))
- pfn = swap_pte_to_pagemap_entry(*pte);
+ pfn = PM_PFRAME(swap_pte_to_pagemap_entry(*pte))
+ | PM_PSHIFT(PAGE_SHIFT) | PM_SWAP;
else if (pte_present(*pte))
- pfn = pte_pfn(*pte);
+ pfn = PM_PFRAME(pte_pfn(*pte))
+ | PM_PSHIFT(PAGE_SHIFT) | PM_PRESENT;
/* unmap so we're not in atomic when we copy to userspace */
pte_unmap(pte);
err = add_to_pagemap(addr, pfn, pm);
@@ -611,12 +621,20 @@ static struct mm_walk pagemap_walk = {
/*
* /proc/pid/pagemap - an array mapping virtual pages to pfns
*
- * For each page in the address space, this file contains one 64-bit
- * entry representing the corresponding physical page frame number
- * (PFN) if the page is present. If there is a swap entry for the
- * physical page, then an encoding of the swap file number and the
- * page's offset into the swap file are returned. If no page is
- * present at all, PM_NOT_PRESENT is returned. This allows determining
+ * For each page in the address space, this file contains one 64-bit entry
+ * consisting of the following:
+ *
+ * Bits 0-55 page frame number (PFN) if present
+ * Bits 0-4 swap type if swapped
+ * Bits 5-55 swap offset if swapped
+ * Bits 55-60 page shift (page size = 1<<page shift)
+ * Bit 61 reserved for future use
+ * Bit 62 page swapped
+ * Bit 63 page present
+ *
+ * If the page is not present but in swap, then the PFN contains an
+ * encoding of the swap file number and the page's offset into the
+ * swap. Unmapped pages return a null PFN. This allows determining
* precisely which pages are mapped (or in swap) and comparing mapped
* pages between processes.
*
diff --git a/fs/reiserfs/do_balan.c b/fs/reiserfs/do_balan.c
index f85c5cf4934..7ee4208793b 100644
--- a/fs/reiserfs/do_balan.c
+++ b/fs/reiserfs/do_balan.c
@@ -283,7 +283,7 @@ static int balance_leaf(struct tree_balance *tb, struct item_head *ih, /* item h
return balance_leaf_when_delete(tb, flag);
zeros_num = 0;
- if (flag == M_INSERT && body == 0)
+ if (flag == M_INSERT && !body)
zeros_num = ih_item_len(ih);
pos_in_item = tb->tb_path->pos_in_item;
@@ -1728,7 +1728,7 @@ struct buffer_head *get_FEB(struct tree_balance *tb)
struct buffer_info bi;
for (i = 0; i < MAX_FEB_SIZE; i++)
- if (tb->FEB[i] != 0)
+ if (tb->FEB[i] != NULL)
break;
if (i == MAX_FEB_SIZE)
@@ -1827,7 +1827,7 @@ int get_left_neighbor_position(struct tree_balance *tb, int h)
{
int Sh_position = PATH_H_POSITION(tb->tb_path, h + 1);
- RFALSE(PATH_H_PPARENT(tb->tb_path, h) == 0 || tb->FL[h] == 0,
+ RFALSE(PATH_H_PPARENT(tb->tb_path, h) == NULL || tb->FL[h] == NULL,
"vs-12325: FL[%d](%p) or F[%d](%p) does not exist",
h, tb->FL[h], h, PATH_H_PPARENT(tb->tb_path, h));
@@ -1841,7 +1841,7 @@ int get_right_neighbor_position(struct tree_balance *tb, int h)
{
int Sh_position = PATH_H_POSITION(tb->tb_path, h + 1);
- RFALSE(PATH_H_PPARENT(tb->tb_path, h) == 0 || tb->FR[h] == 0,
+ RFALSE(PATH_H_PPARENT(tb->tb_path, h) == NULL || tb->FR[h] == NULL,
"vs-12330: F[%d](%p) or FR[%d](%p) does not exist",
h, PATH_H_PPARENT(tb->tb_path, h), h, tb->FR[h]);
diff --git a/fs/reiserfs/fix_node.c b/fs/reiserfs/fix_node.c
index 0ee35c6c9b7..07d05e0842b 100644
--- a/fs/reiserfs/fix_node.c
+++ b/fs/reiserfs/fix_node.c
@@ -153,7 +153,7 @@ static void create_virtual_node(struct tree_balance *tb, int h)
if (vn->vn_mode == M_INSERT) {
struct virtual_item *vi = vn->vn_vi + vn->vn_affected_item_num;
- RFALSE(vn->vn_ins_ih == 0,
+ RFALSE(vn->vn_ins_ih == NULL,
"vs-8040: item header of inserted item is not specified");
vi->vi_item_len = tb->insert_size[0];
vi->vi_ih = vn->vn_ins_ih;
@@ -857,7 +857,8 @@ static int get_lfree(struct tree_balance *tb, int h)
struct buffer_head *l, *f;
int order;
- if ((f = PATH_H_PPARENT(tb->tb_path, h)) == 0 || (l = tb->FL[h]) == 0)
+ if ((f = PATH_H_PPARENT(tb->tb_path, h)) == NULL ||
+ (l = tb->FL[h]) == NULL)
return 0;
if (f == l)
@@ -878,7 +879,8 @@ static int get_rfree(struct tree_balance *tb, int h)
struct buffer_head *r, *f;
int order;
- if ((f = PATH_H_PPARENT(tb->tb_path, h)) == 0 || (r = tb->FR[h]) == 0)
+ if ((f = PATH_H_PPARENT(tb->tb_path, h)) == NULL ||
+ (r = tb->FR[h]) == NULL)
return 0;
if (f == r)
diff --git a/fs/reiserfs/lbalance.c b/fs/reiserfs/lbalance.c
index 281f8061ac5..6de060a6aa7 100644
--- a/fs/reiserfs/lbalance.c
+++ b/fs/reiserfs/lbalance.c
@@ -626,7 +626,7 @@ static void leaf_define_dest_src_infos(int shift_mode, struct tree_balance *tb,
"vs-10250: leaf_define_dest_src_infos: shift type is unknown (%d)",
shift_mode);
}
- RFALSE(src_bi->bi_bh == 0 || dest_bi->bi_bh == 0,
+ RFALSE(!src_bi->bi_bh || !dest_bi->bi_bh,
"vs-10260: mode==%d, source (%p) or dest (%p) buffer is initialized incorrectly",
shift_mode, src_bi->bi_bh, dest_bi->bi_bh);
}
diff --git a/fs/reiserfs/namei.c b/fs/reiserfs/namei.c
index b378eea332c..8867533cb72 100644
--- a/fs/reiserfs/namei.c
+++ b/fs/reiserfs/namei.c
@@ -452,7 +452,7 @@ static int reiserfs_add_entry(struct reiserfs_transaction_handle *th,
buflen = DEH_SIZE + ROUND_UP(namelen);
if (buflen > sizeof(small_buf)) {
buffer = kmalloc(buflen, GFP_NOFS);
- if (buffer == 0)
+ if (!buffer)
return -ENOMEM;
} else
buffer = small_buf;
diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index eba037b3338..344b9b96cc5 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -191,28 +191,11 @@ static struct dentry *get_xa_file_dentry(const struct inode *inode,
dput(xadir);
if (err)
xafile = ERR_PTR(err);
- return xafile;
-}
-
-/* Opens a file pointer to the attribute associated with inode */
-static struct file *open_xa_file(const struct inode *inode, const char *name,
- int flags)
-{
- struct dentry *xafile;
- struct file *fp;
-
- xafile = get_xa_file_dentry(inode, name, flags);
- if (IS_ERR(xafile))
- return ERR_PTR(PTR_ERR(xafile));
else if (!xafile->d_inode) {
dput(xafile);
- return ERR_PTR(-ENODATA);
+ xafile = ERR_PTR(-ENODATA);
}
-
- fp = dentry_open(xafile, NULL, O_RDWR);
- /* dentry_open dputs the dentry if it fails */
-
- return fp;
+ return xafile;
}
/*
@@ -228,9 +211,8 @@ static struct file *open_xa_file(const struct inode *inode, const char *name,
* we're called with i_mutex held, so there are no worries about the directory
* changing underneath us.
*/
-static int __xattr_readdir(struct file *filp, void *dirent, filldir_t filldir)
+static int __xattr_readdir(struct inode *inode, void *dirent, filldir_t filldir)
{
- struct inode *inode = filp->f_path.dentry->d_inode;
struct cpu_key pos_key; /* key of current position in the directory (key of directory entry) */
INITIALIZE_PATH(path_to_entry);
struct buffer_head *bh;
@@ -374,23 +356,16 @@ static int __xattr_readdir(struct file *filp, void *dirent, filldir_t filldir)
*
*/
static
-int xattr_readdir(struct file *file, filldir_t filler, void *buf)
+int xattr_readdir(struct inode *inode, filldir_t filler, void *buf)
{
- struct inode *inode = file->f_path.dentry->d_inode;
- int res = -ENOTDIR;
- if (!file->f_op || !file->f_op->readdir)
- goto out;
+ int res = -ENOENT;
mutex_lock_nested(&inode->i_mutex, I_MUTEX_XATTR);
-// down(&inode->i_zombie);
- res = -ENOENT;
if (!IS_DEADDIR(inode)) {
lock_kernel();
- res = __xattr_readdir(file, buf, filler);
+ res = __xattr_readdir(inode, buf, filler);
unlock_kernel();
}
-// up(&inode->i_zombie);
mutex_unlock(&inode->i_mutex);
- out:
return res;
}
@@ -442,7 +417,7 @@ reiserfs_xattr_set(struct inode *inode, const char *name, const void *buffer,
size_t buffer_size, int flags)
{
int err = 0;
- struct file *fp;
+ struct dentry *dentry;
struct page *page;
char *data;
struct address_space *mapping;
@@ -460,18 +435,18 @@ reiserfs_xattr_set(struct inode *inode, const char *name, const void *buffer,
xahash = xattr_hash(buffer, buffer_size);
open_file:
- fp = open_xa_file(inode, name, flags);
- if (IS_ERR(fp)) {
- err = PTR_ERR(fp);
+ dentry = get_xa_file_dentry(inode, name, flags);
+ if (IS_ERR(dentry)) {
+ err = PTR_ERR(dentry);
goto out;
}
- xinode = fp->f_path.dentry->d_inode;
+ xinode = dentry->d_inode;
REISERFS_I(inode)->i_flags |= i_has_xattr_dir;
/* we need to copy it off.. */
if (xinode->i_nlink > 1) {
- fput(fp);
+ dput(dentry);
err = reiserfs_xattr_del(inode, name);
if (err < 0)
goto out;
@@ -485,7 +460,7 @@ reiserfs_xattr_set(struct inode *inode, const char *name, const void *buffer,
newattrs.ia_size = buffer_size;
newattrs.ia_valid = ATTR_SIZE | ATTR_CTIME;
mutex_lock_nested(&xinode->i_mutex, I_MUTEX_XATTR);
- err = notify_change(fp->f_path.dentry, &newattrs);
+ err = notify_change(dentry, &newattrs);
if (err)
goto out_filp;
@@ -518,15 +493,14 @@ reiserfs_xattr_set(struct inode *inode, const char *name, const void *buffer,
rxh->h_hash = cpu_to_le32(xahash);
}
- err = reiserfs_prepare_write(fp, page, page_offset,
+ err = reiserfs_prepare_write(NULL, page, page_offset,
page_offset + chunk + skip);
if (!err) {
if (buffer)
memcpy(data + skip, buffer + buffer_pos, chunk);
- err =
- reiserfs_commit_write(fp, page, page_offset,
- page_offset + chunk +
- skip);
+ err = reiserfs_commit_write(NULL, page, page_offset,
+ page_offset + chunk +
+ skip);
}
unlock_page(page);
reiserfs_put_page(page);
@@ -548,7 +522,7 @@ reiserfs_xattr_set(struct inode *inode, const char *name, const void *buffer,
out_filp:
mutex_unlock(&xinode->i_mutex);
- fput(fp);
+ dput(dentry);
out:
return err;
@@ -562,7 +536,7 @@ reiserfs_xattr_get(const struct inode *inode, const char *name, void *buffer,
size_t buffer_size)
{
ssize_t err = 0;
- struct file *fp;
+ struct dentry *dentry;
size_t isize;
size_t file_pos = 0;
size_t buffer_pos = 0;
@@ -578,13 +552,13 @@ reiserfs_xattr_get(const struct inode *inode, const char *name, void *buffer,
if (get_inode_sd_version(inode) == STAT_DATA_V1)
return -EOPNOTSUPP;
- fp = open_xa_file(inode, name, FL_READONLY);
- if (IS_ERR(fp)) {
- err = PTR_ERR(fp);
+ dentry = get_xa_file_dentry(inode, name, FL_READONLY);
+ if (IS_ERR(dentry)) {
+ err = PTR_ERR(dentry);
goto out;
}
- xinode = fp->f_path.dentry->d_inode;
+ xinode = dentry->d_inode;
isize = xinode->i_size;
REISERFS_I(inode)->i_flags |= i_has_xattr_dir;
@@ -652,7 +626,7 @@ reiserfs_xattr_get(const struct inode *inode, const char *name, void *buffer,
}
out_dput:
- fput(fp);
+ dput(dentry);
out:
return err;
@@ -742,7 +716,6 @@ reiserfs_delete_xattrs_filler(void *buf, const char *name, int namelen,
/* This is called w/ inode->i_mutex downed */
int reiserfs_delete_xattrs(struct inode *inode)
{
- struct file *fp;
struct dentry *dir, *root;
int err = 0;
@@ -763,15 +736,8 @@ int reiserfs_delete_xattrs(struct inode *inode)
return 0;
}
- fp = dentry_open(dir, NULL, O_RDWR);
- if (IS_ERR(fp)) {
- err = PTR_ERR(fp);
- /* dentry_open dputs the dentry if it fails */
- goto out;
- }
-
lock_kernel();
- err = xattr_readdir(fp, reiserfs_delete_xattrs_filler, dir);
+ err = xattr_readdir(dir->d_inode, reiserfs_delete_xattrs_filler, dir);
if (err) {
unlock_kernel();
goto out_dir;
@@ -791,7 +757,7 @@ int reiserfs_delete_xattrs(struct inode *inode)
unlock_kernel();
out_dir:
- fput(fp);
+ dput(dir);
out:
if (!err)
@@ -833,7 +799,6 @@ reiserfs_chown_xattrs_filler(void *buf, const char *name, int namelen,
int reiserfs_chown_xattrs(struct inode *inode, struct iattr *attrs)
{
- struct file *fp;
struct dentry *dir;
int err = 0;
struct reiserfs_chown_buf buf;
@@ -857,13 +822,6 @@ int reiserfs_chown_xattrs(struct inode *inode, struct iattr *attrs)
goto out;
}
- fp = dentry_open(dir, NULL, O_RDWR);
- if (IS_ERR(fp)) {
- err = PTR_ERR(fp);
- /* dentry_open dputs the dentry if it fails */
- goto out;
- }
-
lock_kernel();
attrs->ia_valid &= (ATTR_UID | ATTR_GID | ATTR_CTIME);
@@ -871,7 +829,7 @@ int reiserfs_chown_xattrs(struct inode *inode, struct iattr *attrs)
buf.attrs = attrs;
buf.inode = inode;
- err = xattr_readdir(fp, reiserfs_chown_xattrs_filler, &buf);
+ err = xattr_readdir(dir->d_inode, reiserfs_chown_xattrs_filler, &buf);
if (err) {
unlock_kernel();
goto out_dir;
@@ -881,7 +839,7 @@ int reiserfs_chown_xattrs(struct inode *inode, struct iattr *attrs)
unlock_kernel();
out_dir:
- fput(fp);
+ dput(dir);
out:
attrs->ia_valid = ia_valid;
@@ -1029,7 +987,6 @@ reiserfs_listxattr_filler(void *buf, const char *name, int namelen,
*/
ssize_t reiserfs_listxattr(struct dentry * dentry, char *buffer, size_t size)
{
- struct file *fp;
struct dentry *dir;
int err = 0;
struct reiserfs_listxattr_buf buf;
@@ -1052,13 +1009,6 @@ ssize_t reiserfs_listxattr(struct dentry * dentry, char *buffer, size_t size)
goto out;
}
- fp = dentry_open(dir, NULL, O_RDWR);
- if (IS_ERR(fp)) {
- err = PTR_ERR(fp);
- /* dentry_open dputs the dentry if it fails */
- goto out;
- }
-
buf.r_buf = buffer;
buf.r_size = buffer ? size : 0;
buf.r_pos = 0;
@@ -1066,7 +1016,7 @@ ssize_t reiserfs_listxattr(struct dentry * dentry, char *buffer, size_t size)
REISERFS_I(dentry->d_inode)->i_flags |= i_has_xattr_dir;
- err = xattr_readdir(fp, reiserfs_listxattr_filler, &buf);
+ err = xattr_readdir(dir->d_inode, reiserfs_listxattr_filler, &buf);
if (err)
goto out_dir;
@@ -1076,7 +1026,7 @@ ssize_t reiserfs_listxattr(struct dentry * dentry, char *buffer, size_t size)
err = buf.r_pos;
out_dir:
- fput(fp);
+ dput(dir);
out:
reiserfs_read_unlock_xattr_i(dentry->d_inode);
diff --git a/fs/romfs/inode.c b/fs/romfs/inode.c
index 00b6f0a518c..3f13d491c7c 100644
--- a/fs/romfs/inode.c
+++ b/fs/romfs/inode.c
@@ -340,8 +340,9 @@ static struct dentry *
romfs_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd)
{
unsigned long offset, maxoff;
- int fslen, res;
- struct inode *inode;
+ long res;
+ int fslen;
+ struct inode *inode = NULL;
char fsname[ROMFS_MAXFN]; /* XXX dynamic? */
struct romfs_inode ri;
const char *name; /* got from dentry */
@@ -351,7 +352,7 @@ romfs_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd)
offset = dir->i_ino & ROMFH_MASK;
lock_kernel();
if (romfs_copyfrom(dir, &ri, offset, ROMFH_SIZE) <= 0)
- goto out;
+ goto error;
maxoff = romfs_maxsize(dir->i_sb);
offset = be32_to_cpu(ri.spec) & ROMFH_MASK;
@@ -364,9 +365,9 @@ romfs_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd)
for(;;) {
if (!offset || offset >= maxoff)
- goto out0;
+ goto success; /* negative success */
if (romfs_copyfrom(dir, &ri, offset, ROMFH_SIZE) <= 0)
- goto out;
+ goto error;
/* try to match the first 16 bytes of name */
fslen = romfs_strnlen(dir, offset+ROMFH_SIZE, ROMFH_SIZE);
@@ -397,23 +398,14 @@ romfs_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd)
inode = romfs_iget(dir->i_sb, offset);
if (IS_ERR(inode)) {
res = PTR_ERR(inode);
- goto out;
+ goto error;
}
- /*
- * it's a bit funky, _lookup needs to return an error code
- * (negative) or a NULL, both as a dentry. ENOENT should not
- * be returned, instead we need to create a negative dentry by
- * d_add(dentry, NULL); and return 0 as no error.
- * (Although as I see, it only matters on writable file
- * systems).
- */
-
-out0: inode = NULL;
+success:
+ d_add(dentry, inode);
res = 0;
- d_add (dentry, inode);
-
-out: unlock_kernel();
+error:
+ unlock_kernel();
return ERR_PTR(res);
}
diff --git a/fs/smbfs/smbiod.c b/fs/smbfs/smbiod.c
index fae8e85af0e..6bd9b691a46 100644
--- a/fs/smbfs/smbiod.c
+++ b/fs/smbfs/smbiod.c
@@ -206,7 +206,7 @@ int smbiod_retry(struct smb_sb_info *server)
smb_close_socket(server);
- if (pid == 0) {
+ if (!pid) {
/* FIXME: this is fatal, umount? */
printk(KERN_ERR "smb_retry: no connection process\n");
server->state = CONN_RETRIED;
diff --git a/fs/super.c b/fs/super.c
index 010446d8c40..09008dbd264 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -556,11 +556,11 @@ out:
}
/**
- * mark_files_ro
+ * mark_files_ro - mark all files read-only
* @sb: superblock in question
*
- * All files are marked read/only. We don't care about pending
- * delete files so this should be used in 'force' mode only
+ * All files are marked read-only. We don't care about pending
+ * delete files so this should be used in 'force' mode only.
*/
static void mark_files_ro(struct super_block *sb)
@@ -945,6 +945,7 @@ do_kern_mount(const char *fstype, int flags, const char *name, void *data)
put_filesystem(type);
return mnt;
}
+EXPORT_SYMBOL_GPL(do_kern_mount);
struct vfsmount *kern_mount_data(struct file_system_type *type, void *data)
{
diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c
index a271c87c447..baa663e6938 100644
--- a/fs/sysfs/file.c
+++ b/fs/sysfs/file.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
#include <linux/kobject.h>
+#include <linux/kallsyms.h>
#include <linux/namei.h>
#include <linux/poll.h>
#include <linux/list.h>
@@ -86,7 +87,12 @@ static int fill_read_buffer(struct dentry * dentry, struct sysfs_buffer * buffer
* The code works fine with PAGE_SIZE return but it's likely to
* indicate truncated result or overflow in normal use cases.
*/
- BUG_ON(count >= (ssize_t)PAGE_SIZE);
+ if (count >= (ssize_t)PAGE_SIZE) {
+ print_symbol("fill_read_buffer: %s returned bad count\n",
+ (unsigned long)ops->show);
+ /* Try to struggle along */
+ count = PAGE_SIZE - 1;
+ }
if (count >= 0) {
buffer->needs_read_fill = 0;
buffer->count = count;
diff --git a/fs/ufs/balloc.c b/fs/ufs/balloc.c
index 1fca381f0ce..1e7598fb978 100644
--- a/fs/ufs/balloc.c
+++ b/fs/ufs/balloc.c
@@ -315,8 +315,8 @@ static void ufs_change_blocknr(struct inode *inode, sector_t beg,
}
UFSD(" change from %llu to %llu, pos %u\n",
- (unsigned long long)pos + oldb,
- (unsigned long long)pos + newb, pos);
+ (unsigned long long)(pos + oldb),
+ (unsigned long long)(pos + newb), pos);
bh->b_blocknr = newb + pos;
unmap_underlying_metadata(bh->b_bdev,
diff --git a/include/asm-alpha/current.h b/include/asm-alpha/current.h
index 8d88a13c1be..094d285a1b3 100644
--- a/include/asm-alpha/current.h
+++ b/include/asm-alpha/current.h
@@ -3,7 +3,7 @@
#include <linux/thread_info.h>
-#define get_current() (current_thread_info()->task + 0)
+#define get_current() (current_thread_info()->task)
#define current get_current()
#endif /* _ALPHA_CURRENT_H */
diff --git a/include/asm-alpha/dma-mapping.h b/include/asm-alpha/dma-mapping.h
index 75a1aff5b57..db351d1296f 100644
--- a/include/asm-alpha/dma-mapping.h
+++ b/include/asm-alpha/dma-mapping.h
@@ -11,7 +11,7 @@
#define dma_unmap_single(dev, addr, size, dir) \
pci_unmap_single(alpha_gendev_to_pci(dev), addr, size, dir)
#define dma_alloc_coherent(dev, size, addr, gfp) \
- pci_alloc_consistent(alpha_gendev_to_pci(dev), size, addr)
+ __pci_alloc_consistent(alpha_gendev_to_pci(dev), size, addr, gfp)
#define dma_free_coherent(dev, size, va, addr) \
pci_free_consistent(alpha_gendev_to_pci(dev), size, va, addr)
#define dma_map_page(dev, page, off, size, dir) \
diff --git a/include/asm-alpha/kvm.h b/include/asm-alpha/kvm.h
new file mode 100644
index 00000000000..b9daec42968
--- /dev/null
+++ b/include/asm-alpha/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_ALPHA_H
+#define __LINUX_KVM_ALPHA_H
+
+/* alpha does not support KVM */
+
+#endif
diff --git a/include/asm-alpha/pci.h b/include/asm-alpha/pci.h
index d5b10ef6436..d31fd49ff79 100644
--- a/include/asm-alpha/pci.h
+++ b/include/asm-alpha/pci.h
@@ -76,7 +76,13 @@ extern inline void pcibios_penalize_isa_irq(int irq, int active)
successful and sets *DMA_ADDRP to the pci side dma address as well,
else DMA_ADDRP is undefined. */
-extern void *pci_alloc_consistent(struct pci_dev *, size_t, dma_addr_t *);
+extern void *__pci_alloc_consistent(struct pci_dev *, size_t,
+ dma_addr_t *, gfp_t);
+static inline void *
+pci_alloc_consistent(struct pci_dev *dev, size_t size, dma_addr_t *dma)
+{
+ return __pci_alloc_consistent(dev, size, dma, GFP_ATOMIC);
+}
/* Free and unmap a consistent DMA buffer. CPU_ADDR and DMA_ADDR must
be values that were returned from pci_alloc_consistent. SIZE must
diff --git a/include/asm-arm/arch-at91/at91cap9.h b/include/asm-arm/arch-at91/at91cap9.h
index 73e1fcf4a0a..bac83adb505 100644
--- a/include/asm-arm/arch-at91/at91cap9.h
+++ b/include/asm-arm/arch-at91/at91cap9.h
@@ -97,12 +97,17 @@
#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS)
#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDC (0xfffffd10 - AT91_BASE_SYS)
+#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
+#define AT91_USART0 AT91CAP9_BASE_US0
+#define AT91_USART1 AT91CAP9_BASE_US1
+#define AT91_USART2 AT91CAP9_BASE_US2
+
+
/*
* Internal Memory.
*/
diff --git a/include/asm-arm/arch-omap/dsp_common.h b/include/asm-arm/arch-omap/dsp_common.h
index c61f868f24e..da97736f3ef 100644
--- a/include/asm-arm/arch-omap/dsp_common.h
+++ b/include/asm-arm/arch-omap/dsp_common.h
@@ -24,11 +24,17 @@
#ifndef ASM_ARCH_DSP_COMMON_H
#define ASM_ARCH_DSP_COMMON_H
-#ifdef CONFIG_ARCH_OMAP1
+#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_OMAP_MMU_FWK)
extern void omap_dsp_request_mpui(void);
extern void omap_dsp_release_mpui(void);
extern int omap_dsp_request_mem(void);
extern int omap_dsp_release_mem(void);
+#else
+static inline int omap_dsp_request_mem(void)
+{
+ return 0;
+}
+#define omap_dsp_release_mem() do {} while (0)
#endif
#endif /* ASM_ARCH_DSP_COMMON_H */
diff --git a/include/asm-arm/arch-s3c2410/irqs.h b/include/asm-arm/arch-s3c2410/irqs.h
index d858b3eb554..f5435d8c376 100644
--- a/include/asm-arm/arch-s3c2410/irqs.h
+++ b/include/asm-arm/arch-s3c2410/irqs.h
@@ -85,7 +85,7 @@
#define IRQ_EINT23 S3C2410_IRQ(51)
-#define IRQ_EINT(x) S3C2410_IRQ((x >= 4) ? (IRQ_EINT4 + (x) - 4) : (S3C2410_IRQ(0) + (x)))
+#define IRQ_EINT(x) (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x)))
#define IRQ_LCD_FIFO S3C2410_IRQ(52)
#define IRQ_LCD_FRAME S3C2410_IRQ(53)
diff --git a/include/asm-arm/kvm.h b/include/asm-arm/kvm.h
new file mode 100644
index 00000000000..cb3c08cbcb9
--- /dev/null
+++ b/include/asm-arm/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_ARM_H
+#define __LINUX_KVM_ARM_H
+
+/* arm does not support KVM */
+
+#endif
diff --git a/include/asm-avr32/byteorder.h b/include/asm-avr32/byteorder.h
index 402ff4125cd..d77b48ba733 100644
--- a/include/asm-avr32/byteorder.h
+++ b/include/asm-avr32/byteorder.h
@@ -12,8 +12,14 @@ extern unsigned long __builtin_bswap_32(unsigned long x);
extern unsigned short __builtin_bswap_16(unsigned short x);
#endif
+/*
+ * avr32-linux-gcc versions earlier than 4.2 improperly sign-extends
+ * the result.
+ */
+#if !(__GNUC__ == 4 && __GNUC_MINOR__ < 2)
#define __arch__swab32(x) __builtin_bswap_32(x)
#define __arch__swab16(x) __builtin_bswap_16(x)
+#endif
#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
# define __BYTEORDER_HAS_U64__
diff --git a/include/asm-avr32/kvm.h b/include/asm-avr32/kvm.h
new file mode 100644
index 00000000000..8c5777020e2
--- /dev/null
+++ b/include/asm-avr32/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_AVR32_H
+#define __LINUX_KVM_AVR32_H
+
+/* avr32 does not support KVM */
+
+#endif
diff --git a/include/asm-blackfin/kvm.h b/include/asm-blackfin/kvm.h
new file mode 100644
index 00000000000..e3477d77c01
--- /dev/null
+++ b/include/asm-blackfin/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_BLACKFIN_H
+#define __LINUX_KVM_BLACKFIN_H
+
+/* blackfin does not support KVM */
+
+#endif
diff --git a/include/asm-cris/kvm.h b/include/asm-cris/kvm.h
new file mode 100644
index 00000000000..c860f51149f
--- /dev/null
+++ b/include/asm-cris/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_CRIS_H
+#define __LINUX_KVM_CRIS_H
+
+/* cris does not support KVM */
+
+#endif
diff --git a/include/asm-frv/kvm.h b/include/asm-frv/kvm.h
new file mode 100644
index 00000000000..9c8a4f08d0a
--- /dev/null
+++ b/include/asm-frv/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_FRV_H
+#define __LINUX_KVM_FRV_H
+
+/* frv does not support KVM */
+
+#endif
diff --git a/include/asm-frv/system.h b/include/asm-frv/system.h
index b400cea8148..2c57f473474 100644
--- a/include/asm-frv/system.h
+++ b/include/asm-frv/system.h
@@ -234,7 +234,7 @@ extern void free_initmem(void);
break; \
\
default: \
- __xg_orig = 0; \
+ __xg_orig = (__typeof__(__xg_orig))0; \
asm volatile("break"); \
break; \
} \
@@ -259,7 +259,7 @@ extern uint32_t __cmpxchg_32(uint32_t *v, uint32_t test, uint32_t new);
(__force uint32_t)__xg_test, \
(__force uint32_t)__xg_new); break; \
default: \
- __xg_orig = 0; \
+ __xg_orig = (__typeof__(__xg_orig))0; \
asm volatile("break"); \
break; \
} \
diff --git a/include/asm-generic/Kbuild.asm b/include/asm-generic/Kbuild.asm
index fd9dcfd91c3..92a6d91d0c1 100644
--- a/include/asm-generic/Kbuild.asm
+++ b/include/asm-generic/Kbuild.asm
@@ -1,3 +1,5 @@
+header-y += kvm.h
+
ifeq ($(wildcard include/asm-$(SRCARCH)/a.out.h),include/asm-$(SRCARCH)/a.out.h)
unifdef-y += a.out.h
endif
diff --git a/include/asm-h8300/kvm.h b/include/asm-h8300/kvm.h
new file mode 100644
index 00000000000..bdbed7b987e
--- /dev/null
+++ b/include/asm-h8300/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_H8300_H
+#define __LINUX_KVM_H8300_H
+
+/* h8300 does not support KVM */
+
+#endif
diff --git a/include/asm-ia64/kvm.h b/include/asm-ia64/kvm.h
new file mode 100644
index 00000000000..030d29b4b26
--- /dev/null
+++ b/include/asm-ia64/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_IA64_H
+#define __LINUX_KVM_IA64_H
+
+/* ia64 does not support KVM */
+
+#endif
diff --git a/include/asm-m32r/kvm.h b/include/asm-m32r/kvm.h
new file mode 100644
index 00000000000..99a40515b77
--- /dev/null
+++ b/include/asm-m32r/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_M32R_H
+#define __LINUX_KVM_M32R_H
+
+/* m32r does not support KVM */
+
+#endif
diff --git a/include/asm-m68k/kvm.h b/include/asm-m68k/kvm.h
new file mode 100644
index 00000000000..7ed27fce524
--- /dev/null
+++ b/include/asm-m68k/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_M68K_H
+#define __LINUX_KVM_M68K_H
+
+/* m68k does not support KVM */
+
+#endif
diff --git a/include/asm-m68knommu/kvm.h b/include/asm-m68knommu/kvm.h
new file mode 100644
index 00000000000..b49d4258dab
--- /dev/null
+++ b/include/asm-m68knommu/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_M68KNOMMU_H
+#define __LINUX_KVM_M68KNOMMU_H
+
+/* m68knommu does not support KVM */
+
+#endif
diff --git a/include/asm-mips/kvm.h b/include/asm-mips/kvm.h
new file mode 100644
index 00000000000..093a5b7f796
--- /dev/null
+++ b/include/asm-mips/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_MIPS_H
+#define __LINUX_KVM_MIPS_H
+
+/* mips does not support KVM */
+
+#endif
diff --git a/include/asm-mips/mach-au1x00/au1000.h b/include/asm-mips/mach-au1x00/au1000.h
index cb18af98964..5bb57bf2b9d 100644
--- a/include/asm-mips/mach-au1x00/au1000.h
+++ b/include/asm-mips/mach-au1x00/au1000.h
@@ -1786,6 +1786,7 @@ struct cpu_spec {
char *cpu_name;
unsigned char cpu_od; /* Set Config[OD] */
unsigned char cpu_bclk; /* Enable BCLK switching */
+ unsigned char cpu_pll_wo; /* sys_cpupll reg. write-only */
};
extern struct cpu_spec cpu_specs[];
diff --git a/include/asm-mn10300/kvm.h b/include/asm-mn10300/kvm.h
new file mode 100644
index 00000000000..f6b609ff4a5
--- /dev/null
+++ b/include/asm-mn10300/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_MN10300_H
+#define __LINUX_KVM_MN10300_H
+
+/* mn10300 does not support KVM */
+
+#endif
diff --git a/include/asm-parisc/kvm.h b/include/asm-parisc/kvm.h
new file mode 100644
index 00000000000..00cc4581254
--- /dev/null
+++ b/include/asm-parisc/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_PARISC_H
+#define __LINUX_KVM_PARISC_H
+
+/* parisc does not support KVM */
+
+#endif
diff --git a/include/asm-powerpc/kvm.h b/include/asm-powerpc/kvm.h
new file mode 100644
index 00000000000..d1b530fbf8d
--- /dev/null
+++ b/include/asm-powerpc/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_POWERPC_H
+#define __LINUX_KVM_POWERPC_H
+
+/* powerpc does not support KVM */
+
+#endif
diff --git a/include/asm-s390/kvm.h b/include/asm-s390/kvm.h
new file mode 100644
index 00000000000..573f2a35138
--- /dev/null
+++ b/include/asm-s390/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_S390_H
+#define __LINUX_KVM_S390_H
+
+/* s390 does not support KVM */
+
+#endif
diff --git a/include/asm-sh/byteorder.h b/include/asm-sh/byteorder.h
index 0eb9904b654..4c13e611756 100644
--- a/include/asm-sh/byteorder.h
+++ b/include/asm-sh/byteorder.h
@@ -11,13 +11,13 @@
static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
{
__asm__(
-#ifdef CONFIG_SUPERH32
+#ifdef __SH5__
+ "byterev %0, %0\n\t"
+ "shari %0, 32, %0"
+#else
"swap.b %0, %0\n\t"
"swap.w %0, %0\n\t"
"swap.b %0, %0"
-#else
- "byterev %0, %0\n\t"
- "shari %0, 32, %0"
#endif
: "=r" (x)
: "0" (x));
@@ -28,12 +28,11 @@ static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
static inline __attribute_const__ __u16 ___arch__swab16(__u16 x)
{
__asm__(
-#ifdef CONFIG_SUPERH32
- "swap.b %0, %0"
-#else
+#ifdef __SH5__
"byterev %0, %0\n\t"
"shari %0, 32, %0"
-
+#else
+ "swap.b %0, %0"
#endif
: "=r" (x)
: "0" (x));
diff --git a/include/asm-sh/floppy.h b/include/asm-sh/floppy.h
deleted file mode 100644
index 59fbfdc90df..00000000000
--- a/include/asm-sh/floppy.h
+++ /dev/null
@@ -1,268 +0,0 @@
-/*
- * Architecture specific parts of the Floppy driver
- * include/asm-i386/floppy.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995
- */
-#ifndef __ASM_SH_FLOPPY_H
-#define __ASM_SH_FLOPPY_H
-
-#include <linux/vmalloc.h>
-
-
-/*
- * The DMA channel used by the floppy controller cannot access data at
- * addresses >= 16MB
- *
- * Went back to the 1MB limit, as some people had problems with the floppy
- * driver otherwise. It doesn't matter much for performance anyway, as most
- * floppy accesses go through the track buffer.
- */
-#define _CROSS_64KB(a,s,vdma) \
-(!vdma && ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64))
-
-#define CROSS_64KB(a,s) _CROSS_64KB(a,s,use_virtual_dma & 1)
-
-
-#define SW fd_routine[use_virtual_dma&1]
-#define CSW fd_routine[can_use_virtual_dma & 1]
-
-
-#define fd_inb(port) inb_p(port)
-#define fd_outb(value,port) outb_p(value,port)
-
-#define fd_request_dma() CSW._request_dma(FLOPPY_DMA,"floppy")
-#define fd_free_dma() CSW._free_dma(FLOPPY_DMA)
-#define fd_enable_irq() enable_irq(FLOPPY_IRQ)
-#define fd_disable_irq() disable_irq(FLOPPY_IRQ)
-#define fd_free_irq() free_irq(FLOPPY_IRQ, NULL)
-#define fd_get_dma_residue() SW._get_dma_residue(FLOPPY_DMA)
-#define fd_dma_mem_alloc(size) SW._dma_mem_alloc(size)
-#define fd_dma_setup(addr, size, mode, io) SW._dma_setup(addr, size, mode, io)
-
-#define FLOPPY_CAN_FALLBACK_ON_NODMA
-
-static int virtual_dma_count;
-static int virtual_dma_residue;
-static char *virtual_dma_addr;
-static int virtual_dma_mode;
-static int doing_pdma;
-
-static void floppy_hardint(int irq, void *dev_id, struct pt_regs * regs)
-{
- register unsigned char st;
-
-#undef TRACE_FLPY_INT
-
-#ifdef TRACE_FLPY_INT
- static int calls=0;
- static int bytes=0;
- static int dma_wait=0;
-#endif
- if(!doing_pdma) {
- floppy_interrupt(irq, dev_id, regs);
- return;
- }
-
-#ifdef TRACE_FLPY_INT
- if(!calls)
- bytes = virtual_dma_count;
-#endif
-
- {
- register int lcount;
- register char *lptr;
-
- st = 1;
- for(lcount=virtual_dma_count, lptr=virtual_dma_addr;
- lcount; lcount--, lptr++) {
- st=inb(virtual_dma_port+4) & 0xa0 ;
- if(st != 0xa0)
- break;
- if(virtual_dma_mode)
- outb_p(*lptr, virtual_dma_port+5);
- else
- *lptr = inb_p(virtual_dma_port+5);
- }
- virtual_dma_count = lcount;
- virtual_dma_addr = lptr;
- st = inb(virtual_dma_port+4);
- }
-
-#ifdef TRACE_FLPY_INT
- calls++;
-#endif
- if(st == 0x20)
- return;
- if(!(st & 0x20)) {
- virtual_dma_residue += virtual_dma_count;
- virtual_dma_count=0;
-#ifdef TRACE_FLPY_INT
- printk("count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n",
- virtual_dma_count, virtual_dma_residue, calls, bytes,
- dma_wait);
- calls = 0;
- dma_wait=0;
-#endif
- doing_pdma = 0;
- floppy_interrupt(irq, dev_id, regs);
- return;
- }
-#ifdef TRACE_FLPY_INT
- if(!virtual_dma_count)
- dma_wait++;
-#endif
-}
-
-static void fd_disable_dma(void)
-{
- if(! (can_use_virtual_dma & 1))
- disable_dma(FLOPPY_DMA);
- doing_pdma = 0;
- virtual_dma_residue += virtual_dma_count;
- virtual_dma_count=0;
-}
-
-static int vdma_request_dma(unsigned int dmanr, const char * device_id)
-{
- return 0;
-}
-
-static void vdma_nop(unsigned int dummy)
-{
-}
-
-
-static int vdma_get_dma_residue(unsigned int dummy)
-{
- return virtual_dma_count + virtual_dma_residue;
-}
-
-
-static int fd_request_irq(void)
-{
- if(can_use_virtual_dma)
- return request_irq(FLOPPY_IRQ, floppy_hardint,
- IRQF_DISABLED, "floppy", NULL);
- else
- return request_irq(FLOPPY_IRQ, floppy_interrupt,
- IRQF_DISABLED, "floppy", NULL);
-}
-
-static unsigned long dma_mem_alloc(unsigned long size)
-{
- return __get_dma_pages(GFP_KERNEL,get_order(size));
-}
-
-
-static unsigned long vdma_mem_alloc(unsigned long size)
-{
- return (unsigned long) vmalloc(size);
-
-}
-
-#define nodma_mem_alloc(size) vdma_mem_alloc(size)
-
-static void _fd_dma_mem_free(unsigned long addr, unsigned long size)
-{
- if((unsigned int) addr >= (unsigned int) high_memory)
- return vfree((void *)addr);
- else
- free_pages(addr, get_order(size));
-}
-
-#define fd_dma_mem_free(addr, size) _fd_dma_mem_free(addr, size)
-
-static void _fd_chose_dma_mode(char *addr, unsigned long size)
-{
- if(can_use_virtual_dma == 2) {
- if((unsigned int) addr >= (unsigned int) high_memory ||
- virt_to_phys(addr) >= 0x10000000)
- use_virtual_dma = 1;
- else
- use_virtual_dma = 0;
- } else {
- use_virtual_dma = can_use_virtual_dma & 1;
- }
-}
-
-#define fd_chose_dma_mode(addr, size) _fd_chose_dma_mode(addr, size)
-
-
-static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
-{
- doing_pdma = 1;
- virtual_dma_port = io;
- virtual_dma_mode = (mode == DMA_MODE_WRITE);
- virtual_dma_addr = addr;
- virtual_dma_count = size;
- virtual_dma_residue = 0;
- return 0;
-}
-
-static int hard_dma_setup(char *addr, unsigned long size, int mode, int io)
-{
-#ifdef FLOPPY_SANITY_CHECK
- if (CROSS_64KB(addr, size)) {
- printk("DMA crossing 64-K boundary %p-%p\n", addr, addr+size);
- return -1;
- }
-#endif
-
- __flush_purge_region(addr, size);
-
- /* actual, physical DMA */
- doing_pdma = 0;
- clear_dma_ff(FLOPPY_DMA);
- set_dma_mode(FLOPPY_DMA,mode);
- set_dma_addr(FLOPPY_DMA,virt_to_phys(addr));
- set_dma_count(FLOPPY_DMA,size);
- enable_dma(FLOPPY_DMA);
- return 0;
-}
-
-static struct fd_routine_l {
- int (*_request_dma)(unsigned int dmanr, const char * device_id);
- void (*_free_dma)(unsigned int dmanr);
- int (*_get_dma_residue)(unsigned int dummy);
- unsigned long (*_dma_mem_alloc) (unsigned long size);
- int (*_dma_setup)(char *addr, unsigned long size, int mode, int io);
-} fd_routine[] = {
- {
- request_dma,
- free_dma,
- get_dma_residue,
- dma_mem_alloc,
- hard_dma_setup
- },
- {
- vdma_request_dma,
- vdma_nop,
- vdma_get_dma_residue,
- vdma_mem_alloc,
- vdma_dma_setup
- }
-};
-
-
-static int FDC1 = 0x3f0;
-static int FDC2 = -1;
-
-/*
- * Floppy types are stored in the rtc's CMOS RAM and so rtc_lock
- * is needed to prevent corrupted CMOS RAM in case "insmod floppy"
- * coincides with another rtc CMOS user. Paul G.
- */
-#define FLOPPY0_TYPE (4)
-#define FLOPPY1_TYPE (0)
-
-#define N_FDC 2
-#define N_DRIVE 8
-
-#define EXTRA_FLOPPY_PARAMS
-
-#endif /* __ASM_SH_FLOPPY_H */
diff --git a/include/asm-sh/fpu.h b/include/asm-sh/fpu.h
index f8429880a27..91462fea150 100644
--- a/include/asm-sh/fpu.h
+++ b/include/asm-sh/fpu.h
@@ -1,9 +1,8 @@
#ifndef __ASM_SH_FPU_H
#define __ASM_SH_FPU_H
-#define SR_FD 0x00008000
-
#ifndef __ASSEMBLY__
+#include <linux/preempt.h>
#include <asm/ptrace.h>
#ifdef CONFIG_SH_FPU
@@ -21,25 +20,35 @@ struct task_struct;
extern void save_fpu(struct task_struct *__tsk, struct pt_regs *regs);
#else
+
#define release_fpu(regs) do { } while (0)
#define grab_fpu(regs) do { } while (0)
-#define save_fpu(tsk, regs) do { } while (0)
+
+static inline void save_fpu(struct task_struct *tsk, struct pt_regs *regs)
+{
+ clear_tsk_thread_flag(tsk, TIF_USEDFPU);
+}
#endif
extern int do_fpu_inst(unsigned short, struct pt_regs *);
-#define unlazy_fpu(tsk, regs) do { \
- if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) { \
- save_fpu(tsk, regs); \
- } \
-} while (0)
-
-#define clear_fpu(tsk, regs) do { \
- if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) { \
- clear_tsk_thread_flag(tsk, TIF_USEDFPU); \
- release_fpu(regs); \
- } \
-} while (0)
+static inline void unlazy_fpu(struct task_struct *tsk, struct pt_regs *regs)
+{
+ preempt_disable();
+ if (test_tsk_thread_flag(tsk, TIF_USEDFPU))
+ save_fpu(tsk, regs);
+ preempt_enable();
+}
+
+static inline void clear_fpu(struct task_struct *tsk, struct pt_regs *regs)
+{
+ preempt_disable();
+ if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) {
+ clear_tsk_thread_flag(tsk, TIF_USEDFPU);
+ release_fpu(regs);
+ }
+ preempt_enable();
+}
#endif /* __ASSEMBLY__ */
diff --git a/include/asm-sh/kvm.h b/include/asm-sh/kvm.h
new file mode 100644
index 00000000000..6af51dbab2d
--- /dev/null
+++ b/include/asm-sh/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_SH_H
+#define __LINUX_KVM_SH_H
+
+/* sh does not support KVM */
+
+#endif
diff --git a/include/asm-sh/posix_types.h b/include/asm-sh/posix_types.h
index 4b9d11c9fc7..4eeb723aee7 100644
--- a/include/asm-sh/posix_types.h
+++ b/include/asm-sh/posix_types.h
@@ -4,4 +4,10 @@
# else
# include "posix_types_64.h"
# endif
+#else
+# ifdef __SH5__
+# include "posix_types_64.h"
+# else
+# include "posix_types_32.h"
+# endif
#endif /* __KERNEL__ */
diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h
index 19fe47c1ca1..ec707b98e5b 100644
--- a/include/asm-sh/processor.h
+++ b/include/asm-sh/processor.h
@@ -2,7 +2,6 @@
#define __ASM_SH_PROCESSOR_H
#include <asm/cpu-features.h>
-#include <asm/fpu.h>
#ifndef __ASSEMBLY__
/*
diff --git a/include/asm-sh/processor_32.h b/include/asm-sh/processor_32.h
index df2d5b039ef..c09305d6a9d 100644
--- a/include/asm-sh/processor_32.h
+++ b/include/asm-sh/processor_32.h
@@ -70,6 +70,7 @@ extern struct sh_cpuinfo cpu_data[];
*/
#define SR_DSP 0x00001000
#define SR_IMASK 0x000000f0
+#define SR_FD 0x00008000
/*
* FPU structure and data
diff --git a/include/asm-sh/processor_64.h b/include/asm-sh/processor_64.h
index eda4bef448e..88a2edf8fa5 100644
--- a/include/asm-sh/processor_64.h
+++ b/include/asm-sh/processor_64.h
@@ -112,6 +112,7 @@ extern struct sh_cpuinfo cpu_data[];
#endif
#define SR_IMASK 0x000000f0
+#define SR_FD 0x00008000
#define SR_SSTEP 0x08000000
#ifndef __ASSEMBLY__
diff --git a/include/asm-sparc/kvm.h b/include/asm-sparc/kvm.h
new file mode 100644
index 00000000000..2e5478da381
--- /dev/null
+++ b/include/asm-sparc/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_SPARC_H
+#define __LINUX_KVM_SPARC_H
+
+/* sparc does not support KVM */
+
+#endif
diff --git a/include/asm-sparc64/backoff.h b/include/asm-sparc64/backoff.h
index dadd6c385c6..fa1fdf67e35 100644
--- a/include/asm-sparc64/backoff.h
+++ b/include/asm-sparc64/backoff.h
@@ -12,7 +12,8 @@
mov reg, tmp; \
88: brnz,pt tmp, 88b; \
sub tmp, 1, tmp; \
- cmp reg, BACKOFF_LIMIT; \
+ set BACKOFF_LIMIT, tmp; \
+ cmp reg, tmp; \
bg,pn %xcc, label; \
nop; \
ba,pt %xcc, label; \
diff --git a/include/asm-sparc64/cpudata.h b/include/asm-sparc64/cpudata.h
index 542421460a1..532975ecfe1 100644
--- a/include/asm-sparc64/cpudata.h
+++ b/include/asm-sparc64/cpudata.h
@@ -86,6 +86,8 @@ extern struct trap_per_cpu trap_block[NR_CPUS];
extern void init_cur_cpu_trap(struct thread_info *);
extern void setup_tba(void);
extern int ncpus_probed;
+extern void __init cpu_probe(void);
+extern const struct seq_operations cpuinfo_op;
extern unsigned long real_hard_smp_processor_id(void);
diff --git a/include/asm-sparc64/dcu.h b/include/asm-sparc64/dcu.h
index ecbed2ae548..0f704e106a1 100644
--- a/include/asm-sparc64/dcu.h
+++ b/include/asm-sparc64/dcu.h
@@ -1,26 +1,27 @@
-/* $Id: dcu.h,v 1.2 2001/03/01 23:23:33 davem Exp $ */
#ifndef _SPARC64_DCU_H
#define _SPARC64_DCU_H
+#include <linux/const.h>
+
/* UltraSparc-III Data Cache Unit Control Register */
-#define DCU_CP 0x0002000000000000 /* Physical Cache Enable w/o mmu*/
-#define DCU_CV 0x0001000000000000 /* Virtual Cache Enable w/o mmu */
-#define DCU_ME 0x0000800000000000 /* NC-store Merging Enable */
-#define DCU_RE 0x0000400000000000 /* RAW bypass Enable */
-#define DCU_PE 0x0000200000000000 /* PCache Enable */
-#define DCU_HPE 0x0000100000000000 /* HW prefetch Enable */
-#define DCU_SPE 0x0000080000000000 /* SW prefetch Enable */
-#define DCU_SL 0x0000040000000000 /* Secondary load steering Enab */
-#define DCU_WE 0x0000020000000000 /* WCache enable */
-#define DCU_PM 0x000001fe00000000 /* PA Watchpoint Byte Mask */
-#define DCU_VM 0x00000001fe000000 /* VA Watchpoint Byte Mask */
-#define DCU_PR 0x0000000001000000 /* PA Watchpoint Read Enable */
-#define DCU_PW 0x0000000000800000 /* PA Watchpoint Write Enable */
-#define DCU_VR 0x0000000000400000 /* VA Watchpoint Read Enable */
-#define DCU_VW 0x0000000000200000 /* VA Watchpoint Write Enable */
-#define DCU_DM 0x0000000000000008 /* DMMU Enable */
-#define DCU_IM 0x0000000000000004 /* IMMU Enable */
-#define DCU_DC 0x0000000000000002 /* Data Cache Enable */
-#define DCU_IC 0x0000000000000001 /* Instruction Cache Enable */
+#define DCU_CP _AC(0x0002000000000000,UL) /* Phys Cache Enable w/o mmu */
+#define DCU_CV _AC(0x0001000000000000,UL) /* Virt Cache Enable w/o mmu */
+#define DCU_ME _AC(0x0000800000000000,UL) /* NC-store Merging Enable */
+#define DCU_RE _AC(0x0000400000000000,UL) /* RAW bypass Enable */
+#define DCU_PE _AC(0x0000200000000000,UL) /* PCache Enable */
+#define DCU_HPE _AC(0x0000100000000000,UL) /* HW prefetch Enable */
+#define DCU_SPE _AC(0x0000080000000000,UL) /* SW prefetch Enable */
+#define DCU_SL _AC(0x0000040000000000,UL) /* Secondary ld-steering Enab*/
+#define DCU_WE _AC(0x0000020000000000,UL) /* WCache enable */
+#define DCU_PM _AC(0x000001fe00000000,UL) /* PA Watchpoint Byte Mask */
+#define DCU_VM _AC(0x00000001fe000000,UL) /* VA Watchpoint Byte Mask */
+#define DCU_PR _AC(0x0000000001000000,UL) /* PA Watchpoint Read Enable */
+#define DCU_PW _AC(0x0000000000800000,UL) /* PA Watchpoint Write Enable*/
+#define DCU_VR _AC(0x0000000000400000,UL) /* VA Watchpoint Read Enable */
+#define DCU_VW _AC(0x0000000000200000,UL) /* VA Watchpoint Write Enable*/
+#define DCU_DM _AC(0x0000000000000008,UL) /* DMMU Enable */
+#define DCU_IM _AC(0x0000000000000004,UL) /* IMMU Enable */
+#define DCU_DC _AC(0x0000000000000002,UL) /* Data Cache Enable */
+#define DCU_IC _AC(0x0000000000000001,UL) /* Instruction Cache Enable */
#endif /* _SPARC64_DCU_H */
diff --git a/include/asm-sparc64/hvtramp.h b/include/asm-sparc64/hvtramp.h
index c7dd6ad056d..b2b9b947b3a 100644
--- a/include/asm-sparc64/hvtramp.h
+++ b/include/asm-sparc64/hvtramp.h
@@ -16,7 +16,7 @@ struct hvtramp_descr {
__u64 fault_info_va;
__u64 fault_info_pa;
__u64 thread_reg;
- struct hvtramp_mapping maps[2];
+ struct hvtramp_mapping maps[1];
};
extern void hv_cpu_startup(unsigned long hvdescr_pa);
diff --git a/include/asm-sparc64/irq.h b/include/asm-sparc64/irq.h
index 30cb76b47be..0bb9bf53174 100644
--- a/include/asm-sparc64/irq.h
+++ b/include/asm-sparc64/irq.h
@@ -64,6 +64,7 @@ extern unsigned char virt_irq_alloc(unsigned int dev_handle,
extern void virt_irq_free(unsigned int virt_irq);
#endif
+extern void __init init_IRQ(void);
extern void fixup_irqs(void);
static inline void set_softint(unsigned long bits)
diff --git a/include/asm-sparc64/kvm.h b/include/asm-sparc64/kvm.h
new file mode 100644
index 00000000000..380537a77bf
--- /dev/null
+++ b/include/asm-sparc64/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_SPARC64_H
+#define __LINUX_KVM_SPARC64_H
+
+/* sparc64 does not support KVM */
+
+#endif
diff --git a/include/asm-sparc64/pgtable.h b/include/asm-sparc64/pgtable.h
index 3167ccff64f..549e45266b6 100644
--- a/include/asm-sparc64/pgtable.h
+++ b/include/asm-sparc64/pgtable.h
@@ -23,9 +23,9 @@
#include <asm/page.h>
#include <asm/processor.h>
-/* The kernel image occupies 0x4000000 to 0x1000000 (4MB --> 32MB).
- * The page copy blockops can use 0x2000000 to 0x4000000.
- * The TSB is mapped in the 0x4000000 to 0x6000000 range.
+/* The kernel image occupies 0x4000000 to 0x6000000 (4MB --> 96MB).
+ * The page copy blockops can use 0x6000000 to 0x8000000.
+ * The TSB is mapped in the 0x8000000 to 0xa000000 range.
* The PROM resides in an area spanning 0xf0000000 to 0x100000000.
* The vmalloc area spans 0x100000000 to 0x200000000.
* Since modules need to be in the lowest 32-bits of the address space,
@@ -33,8 +33,8 @@
* There is a single static kernel PMD which maps from 0x0 to address
* 0x400000000.
*/
-#define TLBTEMP_BASE _AC(0x0000000002000000,UL)
-#define TSBMAP_BASE _AC(0x0000000004000000,UL)
+#define TLBTEMP_BASE _AC(0x0000000006000000,UL)
+#define TSBMAP_BASE _AC(0x0000000008000000,UL)
#define MODULES_VADDR _AC(0x0000000010000000,UL)
#define MODULES_LEN _AC(0x00000000e0000000,UL)
#define MODULES_END _AC(0x00000000f0000000,UL)
@@ -761,6 +761,8 @@ extern unsigned long get_fb_unmapped_area(struct file *filp, unsigned long,
extern void pgtable_cache_init(void);
extern void sun4v_register_fault_status(void);
extern void sun4v_ktsb_register(void);
+extern void __init cheetah_ecache_flush_init(void);
+extern void sun4v_patch_tlb_handlers(void);
extern unsigned long cmdline_memory_size;
diff --git a/include/asm-sparc64/processor.h b/include/asm-sparc64/processor.h
index 8da484c1982..885b6a1dcae 100644
--- a/include/asm-sparc64/processor.h
+++ b/include/asm-sparc64/processor.h
@@ -37,6 +37,9 @@
#endif
#define TASK_SIZE ((unsigned long)-VPTE_SIZE)
+#define TASK_SIZE_OF(tsk) \
+ (test_tsk_thread_flag(tsk,TIF_32BIT) ? \
+ (1UL << 32UL) : TASK_SIZE)
#ifdef __KERNEL__
#define STACK_TOP32 ((1UL << 32UL) - PAGE_SIZE)
diff --git a/include/asm-sparc64/spitfire.h b/include/asm-sparc64/spitfire.h
index 63b7040e813..985ea7e3199 100644
--- a/include/asm-sparc64/spitfire.h
+++ b/include/asm-sparc64/spitfire.h
@@ -63,6 +63,8 @@ extern void cheetah_enable_pcache(void);
SPITFIRE_HIGHEST_LOCKED_TLBENT : \
CHEETAH_HIGHEST_LOCKED_TLBENT)
+extern int num_kernel_image_mappings;
+
/* The data cache is write through, so this just invalidates the
* specified line.
*/
diff --git a/include/asm-sparc64/stacktrace.h b/include/asm-sparc64/stacktrace.h
new file mode 100644
index 00000000000..6cee39adf6d
--- /dev/null
+++ b/include/asm-sparc64/stacktrace.h
@@ -0,0 +1,6 @@
+#ifndef _SPARC64_STACKTRACE_H
+#define _SPARC64_STACKTRACE_H
+
+extern void stack_trace_flush(void);
+
+#endif /* _SPARC64_STACKTRACE_H */
diff --git a/include/asm-sparc64/timer.h b/include/asm-sparc64/timer.h
index ccbd6944886..5b779fd1f78 100644
--- a/include/asm-sparc64/timer.h
+++ b/include/asm-sparc64/timer.h
@@ -1,14 +1,13 @@
-/* $Id: timer.h,v 1.3 2000/05/09 17:40:15 davem Exp $
- * timer.h: System timer definitions for sun5.
+/* timer.h: System timer definitions for sun5.
*
- * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1997, 2008 David S. Miller (davem@davemloft.net)
*/
#ifndef _SPARC64_TIMER_H
#define _SPARC64_TIMER_H
#include <linux/types.h>
-
+#include <linux/init.h>
struct sparc64_tick_ops {
unsigned long (*get_tick)(void);
@@ -25,5 +24,7 @@ struct sparc64_tick_ops {
extern struct sparc64_tick_ops *tick_ops;
extern unsigned long sparc64_get_clock_tick(unsigned int cpu);
+extern void __devinit setup_sparc64_timer(void);
+extern void __init time_init(void);
#endif /* _SPARC64_TIMER_H */
diff --git a/include/asm-um/kvm.h b/include/asm-um/kvm.h
new file mode 100644
index 00000000000..66aa7709455
--- /dev/null
+++ b/include/asm-um/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_UM_H
+#define __LINUX_KVM_UM_H
+
+/* um does not support KVM */
+
+#endif
diff --git a/include/asm-v850/kvm.h b/include/asm-v850/kvm.h
new file mode 100644
index 00000000000..3f729b79feb
--- /dev/null
+++ b/include/asm-v850/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_V850_H
+#define __LINUX_KVM_V850_H
+
+/* v850 does not support KVM */
+
+#endif
diff --git a/include/asm-x86/cmpxchg_32.h b/include/asm-x86/cmpxchg_32.h
index cea1dae288a..959fad00dff 100644
--- a/include/asm-x86/cmpxchg_32.h
+++ b/include/asm-x86/cmpxchg_32.h
@@ -269,22 +269,26 @@ static inline unsigned long cmpxchg_386(volatile void *ptr, unsigned long old,
({ \
__typeof__(*(ptr)) __ret; \
if (likely(boot_cpu_data.x86 > 3)) \
- __ret = __cmpxchg((ptr), (unsigned long)(o), \
- (unsigned long)(n), sizeof(*(ptr))); \
+ __ret = (__typeof__(*(ptr)))__cmpxchg((ptr), \
+ (unsigned long)(o), (unsigned long)(n), \
+ sizeof(*(ptr))); \
else \
- __ret = cmpxchg_386((ptr), (unsigned long)(o), \
- (unsigned long)(n), sizeof(*(ptr))); \
+ __ret = (__typeof__(*(ptr)))cmpxchg_386((ptr), \
+ (unsigned long)(o), (unsigned long)(n), \
+ sizeof(*(ptr))); \
__ret; \
})
#define cmpxchg_local(ptr, o, n) \
({ \
__typeof__(*(ptr)) __ret; \
if (likely(boot_cpu_data.x86 > 3)) \
- __ret = __cmpxchg_local((ptr), (unsigned long)(o), \
- (unsigned long)(n), sizeof(*(ptr))); \
+ __ret = (__typeof__(*(ptr)))__cmpxchg_local((ptr), \
+ (unsigned long)(o), (unsigned long)(n), \
+ sizeof(*(ptr))); \
else \
- __ret = cmpxchg_386((ptr), (unsigned long)(o), \
- (unsigned long)(n), sizeof(*(ptr))); \
+ __ret = (__typeof__(*(ptr)))cmpxchg_386((ptr), \
+ (unsigned long)(o), (unsigned long)(n), \
+ sizeof(*(ptr))); \
__ret; \
})
#endif
@@ -301,10 +305,12 @@ extern unsigned long long cmpxchg_486_u64(volatile void *, u64, u64);
({ \
__typeof__(*(ptr)) __ret; \
if (likely(boot_cpu_data.x86 > 4)) \
- __ret = __cmpxchg64((ptr), (unsigned long long)(o), \
+ __ret = (__typeof__(*(ptr)))__cmpxchg64((ptr), \
+ (unsigned long long)(o), \
(unsigned long long)(n)); \
else \
- __ret = cmpxchg_486_u64((ptr), (unsigned long long)(o), \
+ __ret = (__typeof__(*(ptr)))cmpxchg_486_u64((ptr), \
+ (unsigned long long)(o), \
(unsigned long long)(n)); \
__ret; \
})
@@ -312,10 +318,12 @@ extern unsigned long long cmpxchg_486_u64(volatile void *, u64, u64);
({ \
__typeof__(*(ptr)) __ret; \
if (likely(boot_cpu_data.x86 > 4)) \
- __ret = __cmpxchg64_local((ptr), (unsigned long long)(o), \
+ __ret = (__typeof__(*(ptr)))__cmpxchg64_local((ptr), \
+ (unsigned long long)(o), \
(unsigned long long)(n)); \
else \
- __ret = cmpxchg_486_u64((ptr), (unsigned long long)(o), \
+ __ret = (__typeof__(*(ptr)))cmpxchg_486_u64((ptr), \
+ (unsigned long long)(o), \
(unsigned long long)(n)); \
__ret; \
})
diff --git a/include/asm-x86/e820_32.h b/include/asm-x86/e820_32.h
index f1da7ebd190..e7207a6de3e 100644
--- a/include/asm-x86/e820_32.h
+++ b/include/asm-x86/e820_32.h
@@ -28,6 +28,8 @@ extern void find_max_pfn(void);
extern void register_bootmem_low_pages(unsigned long max_low_pfn);
extern void add_memory_region(unsigned long long start,
unsigned long long size, int type);
+extern void update_memory_range(u64 start, u64 size, unsigned old_type,
+ unsigned new_type);
extern void e820_register_memory(void);
extern void limit_regions(unsigned long long size);
extern void print_memory_map(char *who);
diff --git a/include/asm-x86/e820_64.h b/include/asm-x86/e820_64.h
index a560c4f5d50..22ede73ae72 100644
--- a/include/asm-x86/e820_64.h
+++ b/include/asm-x86/e820_64.h
@@ -18,6 +18,8 @@ extern unsigned long find_e820_area(unsigned long start, unsigned long end,
unsigned size, unsigned long align);
extern void add_memory_region(unsigned long start, unsigned long size,
int type);
+extern void update_memory_range(u64 start, u64 size, unsigned old_type,
+ unsigned new_type);
extern void setup_memory_region(void);
extern void contig_e820_setup(void);
extern unsigned long e820_end_of_ram(void);
diff --git a/include/asm-x86/io_32.h b/include/asm-x86/io_32.h
index 58d2c45cd0b..d4d8fbd9378 100644
--- a/include/asm-x86/io_32.h
+++ b/include/asm-x86/io_32.h
@@ -114,13 +114,13 @@ static inline void * phys_to_virt(unsigned long address)
* If the area you are trying to map is a PCI BAR you should have a
* look at pci_iomap().
*/
-extern void __iomem *ioremap_nocache(unsigned long offset, unsigned long size);
-extern void __iomem *ioremap_cache(unsigned long offset, unsigned long size);
+extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size);
+extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size);
/*
* The default ioremap() behavior is non-cached:
*/
-static inline void __iomem *ioremap(unsigned long offset, unsigned long size)
+static inline void __iomem *ioremap(resource_size_t offset, unsigned long size)
{
return ioremap_nocache(offset, size);
}
diff --git a/include/asm-x86/io_64.h b/include/asm-x86/io_64.h
index f64a59cc396..db0be2011a3 100644
--- a/include/asm-x86/io_64.h
+++ b/include/asm-x86/io_64.h
@@ -158,13 +158,13 @@ extern void early_iounmap(void *addr, unsigned long size);
* it's useful if some control registers are in such an area and write combining
* or read caching is not desirable:
*/
-extern void __iomem *ioremap_nocache(unsigned long offset, unsigned long size);
-extern void __iomem *ioremap_cache(unsigned long offset, unsigned long size);
+extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size);
+extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size);
/*
* The default ioremap() behavior is non-cached:
*/
-static inline void __iomem *ioremap(unsigned long offset, unsigned long size)
+static inline void __iomem *ioremap(resource_size_t offset, unsigned long size)
{
return ioremap_nocache(offset, size);
}
diff --git a/include/asm-x86/lguest_hcall.h b/include/asm-x86/lguest_hcall.h
index 758b9a5d453..f239e7069ca 100644
--- a/include/asm-x86/lguest_hcall.h
+++ b/include/asm-x86/lguest_hcall.h
@@ -27,7 +27,7 @@
#ifndef __ASSEMBLY__
#include <asm/hw_irq.h>
-/*G:031 First, how does our Guest contact the Host to ask for privileged
+/*G:031 But first, how does our Guest contact the Host to ask for privileged
* operations? There are two ways: the direct way is to make a "hypercall",
* to make requests of the Host Itself.
*
diff --git a/include/asm-x86/mach-rdc321x/gpio.h b/include/asm-x86/mach-rdc321x/gpio.h
index db31b929b99..acce0b7d397 100644
--- a/include/asm-x86/mach-rdc321x/gpio.h
+++ b/include/asm-x86/mach-rdc321x/gpio.h
@@ -5,19 +5,20 @@ extern int rdc_gpio_get_value(unsigned gpio);
extern void rdc_gpio_set_value(unsigned gpio, int value);
extern int rdc_gpio_direction_input(unsigned gpio);
extern int rdc_gpio_direction_output(unsigned gpio, int value);
-
+extern int rdc_gpio_request(unsigned gpio, const char *label);
+extern void rdc_gpio_free(unsigned gpio);
+extern void __init rdc321x_gpio_setup(void);
/* Wrappers for the arch-neutral GPIO API */
static inline int gpio_request(unsigned gpio, const char *label)
{
- /* Not yet implemented */
- return 0;
+ return rdc_gpio_request(gpio, label);
}
static inline void gpio_free(unsigned gpio)
{
- /* Not yet implemented */
+ rdc_gpio_free(gpio);
}
static inline int gpio_direction_input(unsigned gpio)
diff --git a/include/asm-x86/mach-rdc321x/rdc321x_defs.h b/include/asm-x86/mach-rdc321x/rdc321x_defs.h
index 838ba8f64fd..c8e9c8bed3d 100644
--- a/include/asm-x86/mach-rdc321x/rdc321x_defs.h
+++ b/include/asm-x86/mach-rdc321x/rdc321x_defs.h
@@ -3,4 +3,10 @@
/* General purpose configuration and data registers */
#define RDC3210_CFGREG_ADDR 0x0CF8
#define RDC3210_CFGREG_DATA 0x0CFC
-#define RDC_MAX_GPIO 0x3A
+
+#define RDC321X_GPIO_CTRL_REG1 0x48
+#define RDC321X_GPIO_CTRL_REG2 0x84
+#define RDC321X_GPIO_DATA_REG1 0x4c
+#define RDC321X_GPIO_DATA_REG2 0x88
+
+#define RDC321X_MAX_GPIO 58
diff --git a/include/asm-x86/page.h b/include/asm-x86/page.h
index 1cb7c51bc29..a05b2896492 100644
--- a/include/asm-x86/page.h
+++ b/include/asm-x86/page.h
@@ -52,13 +52,13 @@ extern int page_is_ram(unsigned long pagenr);
struct page;
-static void inline clear_user_page(void *page, unsigned long vaddr,
+static inline void clear_user_page(void *page, unsigned long vaddr,
struct page *pg)
{
clear_page(page);
}
-static void inline copy_user_page(void *to, void *from, unsigned long vaddr,
+static inline void copy_user_page(void *to, void *from, unsigned long vaddr,
struct page *topage)
{
copy_page(to, from);
diff --git a/include/asm-x86/pgtable.h b/include/asm-x86/pgtable.h
index 174b8773871..9cf472aeb9c 100644
--- a/include/asm-x86/pgtable.h
+++ b/include/asm-x86/pgtable.h
@@ -85,6 +85,7 @@ extern pteval_t __PAGE_KERNEL, __PAGE_KERNEL_EXEC;
#define __PAGE_KERNEL_RX (__PAGE_KERNEL_EXEC & ~_PAGE_RW)
#define __PAGE_KERNEL_EXEC_NOCACHE (__PAGE_KERNEL_EXEC | _PAGE_PCD | _PAGE_PWT)
#define __PAGE_KERNEL_NOCACHE (__PAGE_KERNEL | _PAGE_PCD | _PAGE_PWT)
+#define __PAGE_KERNEL_UC_MINUS (__PAGE_KERNEL | _PAGE_PCD)
#define __PAGE_KERNEL_VSYSCALL (__PAGE_KERNEL_RX | _PAGE_USER)
#define __PAGE_KERNEL_VSYSCALL_NOCACHE (__PAGE_KERNEL_VSYSCALL | _PAGE_PCD | _PAGE_PWT)
#define __PAGE_KERNEL_LARGE (__PAGE_KERNEL | _PAGE_PSE)
@@ -101,6 +102,7 @@ extern pteval_t __PAGE_KERNEL, __PAGE_KERNEL_EXEC;
#define PAGE_KERNEL_EXEC MAKE_GLOBAL(__PAGE_KERNEL_EXEC)
#define PAGE_KERNEL_RX MAKE_GLOBAL(__PAGE_KERNEL_RX)
#define PAGE_KERNEL_NOCACHE MAKE_GLOBAL(__PAGE_KERNEL_NOCACHE)
+#define PAGE_KERNEL_UC_MINUS MAKE_GLOBAL(__PAGE_KERNEL_UC_MINUS)
#define PAGE_KERNEL_EXEC_NOCACHE MAKE_GLOBAL(__PAGE_KERNEL_EXEC_NOCACHE)
#define PAGE_KERNEL_LARGE MAKE_GLOBAL(__PAGE_KERNEL_LARGE)
#define PAGE_KERNEL_LARGE_EXEC MAKE_GLOBAL(__PAGE_KERNEL_LARGE_EXEC)
diff --git a/include/asm-x86/sync_bitops.h b/include/asm-x86/sync_bitops.h
index cbce08a2d13..6b775c90566 100644
--- a/include/asm-x86/sync_bitops.h
+++ b/include/asm-x86/sync_bitops.h
@@ -23,10 +23,6 @@
* This function is atomic and may not be reordered. See __set_bit()
* if you do not require the atomic guarantees.
*
- * Note: there are no guarantees that this function will not be reordered
- * on non-x86 architectures, so if you are writing portable code,
- * make sure not to rely on its reordering guarantees.
- *
* Note that @nr may be almost arbitrarily large; this function is not
* restricted to acting on a single-word quantity.
*/
@@ -61,8 +57,7 @@ static inline void sync_clear_bit(int nr, volatile unsigned long * addr)
* @nr: Bit to change
* @addr: Address to start counting from
*
- * change_bit() is atomic and may not be reordered. It may be
- * reordered on other architectures than x86.
+ * sync_change_bit() is atomic and may not be reordered.
* Note that @nr may be almost arbitrarily large; this function is not
* restricted to acting on a single-word quantity.
*/
@@ -80,7 +75,6 @@ static inline void sync_change_bit(int nr, volatile unsigned long * addr)
* @addr: Address to count from
*
* This operation is atomic and cannot be reordered.
- * It may be reordered on other architectures than x86.
* It also implies a memory barrier.
*/
static inline int sync_test_and_set_bit(int nr, volatile unsigned long * addr)
@@ -99,7 +93,6 @@ static inline int sync_test_and_set_bit(int nr, volatile unsigned long * addr)
* @addr: Address to count from
*
* This operation is atomic and cannot be reordered.
- * It can be reorderdered on other architectures other than x86.
* It also implies a memory barrier.
*/
static inline int sync_test_and_clear_bit(int nr, volatile unsigned long * addr)
diff --git a/include/asm-xtensa/kvm.h b/include/asm-xtensa/kvm.h
new file mode 100644
index 00000000000..bda4e331e98
--- /dev/null
+++ b/include/asm-xtensa/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_XTENSA_H
+#define __LINUX_KVM_XTENSA_H
+
+/* xtensa does not support KVM */
+
+#endif
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 0fac822c115..9cdd12a9e84 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -127,7 +127,6 @@ header-y += pkt_sched.h
header-y += posix_types.h
header-y += ppdev.h
header-y += prctl.h
-header-y += ps2esdi.h
header-y += qnxtypes.h
header-y += quotaio_v1.h
header-y += quotaio_v2.h
@@ -196,7 +195,6 @@ unifdef-y += ethtool.h
unifdef-y += eventpoll.h
unifdef-y += signalfd.h
unifdef-y += ext2_fs.h
-unifdef-y += ext3_fs.h
unifdef-y += fb.h
unifdef-y += fcntl.h
unifdef-y += filter.h
@@ -249,14 +247,13 @@ unifdef-y += isdn.h
unifdef-y += isdnif.h
unifdef-y += isdn_divertif.h
unifdef-y += isdn_ppp.h
-unifdef-y += jbd.h
unifdef-y += joystick.h
unifdef-y += kdev_t.h
unifdef-y += kd.h
unifdef-y += kernelcapi.h
unifdef-y += kernel.h
unifdef-y += keyboard.h
-unifdef-$(CONFIG_HAVE_KVM) += kvm.h
+unifdef-y += kvm.h
unifdef-y += llc.h
unifdef-y += loop.h
unifdef-y += lp.h
diff --git a/include/linux/bitops.h b/include/linux/bitops.h
index 69c1edb9fe5..40d54731de7 100644
--- a/include/linux/bitops.h
+++ b/include/linux/bitops.h
@@ -65,6 +65,46 @@ static inline __u32 ror32(__u32 word, unsigned int shift)
return (word >> shift) | (word << (32 - shift));
}
+/**
+ * rol16 - rotate a 16-bit value left
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u16 rol16(__u16 word, unsigned int shift)
+{
+ return (word << shift) | (word >> (16 - shift));
+}
+
+/**
+ * ror16 - rotate a 16-bit value right
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u16 ror16(__u16 word, unsigned int shift)
+{
+ return (word >> shift) | (word << (16 - shift));
+}
+
+/**
+ * rol8 - rotate an 8-bit value left
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u8 rol8(__u8 word, unsigned int shift)
+{
+ return (word << shift) | (word >> (8 - shift));
+}
+
+/**
+ * ror8 - rotate an 8-bit value right
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u8 ror8(__u8 word, unsigned int shift)
+{
+ return (word >> shift) | (word << (8 - shift));
+}
+
static inline unsigned fls_long(unsigned long l)
{
if (sizeof(l) == 4)
diff --git a/include/linux/compat.h b/include/linux/compat.h
index a671dbff7a1..8fa7857e153 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -192,8 +192,8 @@ asmlinkage long compat_sys_select(int n, compat_ulong_t __user *inp,
struct compat_timeval __user *tvp);
asmlinkage long compat_sys_wait4(compat_pid_t pid,
- compat_uint_t *stat_addr, int options,
- struct compat_rusage *ru);
+ compat_uint_t __user *stat_addr, int options,
+ struct compat_rusage __user *ru);
#define BITS_PER_COMPAT_LONG (8*sizeof(compat_long_t))
diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h
index 6b72a458408..51e6b1e520e 100644
--- a/include/linux/cpuidle.h
+++ b/include/linux/cpuidle.h
@@ -38,8 +38,8 @@ struct cpuidle_state {
unsigned int power_usage; /* in mW */
unsigned int target_residency; /* in US */
- unsigned int usage;
- unsigned int time; /* in US */
+ unsigned long long usage;
+ unsigned long long time; /* in US */
int (*enter) (struct cpuidle_device *dev,
struct cpuidle_state *state);
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 261e43a4c87..34d44069829 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -423,7 +423,7 @@ void dma_async_device_unregister(struct dma_device *device);
/* --- Helper iov-locking functions --- */
struct dma_page_list {
- char *base_address;
+ char __user *base_address;
int nr_pages;
struct page **pages;
};
diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h
index 49829988bfa..897f723bd22 100644
--- a/include/linux/hardirq.h
+++ b/include/linux/hardirq.h
@@ -72,6 +72,13 @@
#define in_softirq() (softirq_count())
#define in_interrupt() (irq_count())
+/*
+ * Are we running in atomic context? WARNING: this macro cannot
+ * always detect atomic context; in particular, it cannot know about
+ * held spinlocks in non-preemptible kernels. Thus it should not be
+ * used in the general case to determine whether sleeping is possible.
+ * Do not use in_atomic() in driver code.
+ */
#define in_atomic() ((preempt_count() & ~PREEMPT_ACTIVE) != 0)
#ifdef CONFIG_PREEMPT
diff --git a/include/linux/ide.h b/include/linux/ide.h
index a3b69c10d66..bc26b2f2735 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -26,7 +26,7 @@
#include <asm/semaphore.h>
#include <asm/mutex.h>
-#if defined(CRIS) || defined(FRV)
+#if defined(CONFIG_CRIS) || defined(CONFIG_FRV)
# define SUPPORT_VLB_SYNC 0
#else
# define SUPPORT_VLB_SYNC 1
diff --git a/include/linux/input.h b/include/linux/input.h
index 1bdc39a8c76..cae2c35d120 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -1227,12 +1227,13 @@ void input_free_device(struct input_dev *dev);
static inline struct input_dev *input_get_device(struct input_dev *dev)
{
- return to_input_dev(get_device(&dev->dev));
+ return dev ? to_input_dev(get_device(&dev->dev)) : NULL;
}
static inline void input_put_device(struct input_dev *dev)
{
- put_device(&dev->dev);
+ if (dev)
+ put_device(&dev->dev);
}
static inline void *input_get_drvdata(struct input_dev *dev)
diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h
index 1b4ccf25b4d..cac4b364cd4 100644
--- a/include/linux/iocontext.h
+++ b/include/linux/iocontext.h
@@ -2,6 +2,7 @@
#define IOCONTEXT_H
#include <linux/radix-tree.h>
+#include <linux/rcupdate.h>
/*
* This is the per-process anticipatory I/O scheduler state.
@@ -54,6 +55,8 @@ struct cfq_io_context {
void (*dtor)(struct io_context *); /* destructor */
void (*exit)(struct io_context *); /* called on task exit */
+
+ struct rcu_head rcu_head;
};
/*
diff --git a/include/linux/jbd.h b/include/linux/jbd.h
index b18fd3b9b83..423f5827218 100644
--- a/include/linux/jbd.h
+++ b/include/linux/jbd.h
@@ -348,8 +348,7 @@ static inline void jbd_unlock_bh_journal_head(struct buffer_head *bh)
struct jbd_revoke_table_s;
/**
- * struct handle_s - The handle_s type is the concrete type associated with
- * handle_t.
+ * struct handle_s - this is the concrete type associated with handle_t.
* @h_transaction: Which compound transaction is this update a part of?
* @h_buffer_credits: Number of remaining buffers we are allowed to dirty.
* @h_ref: Reference count on this handle
@@ -358,12 +357,7 @@ struct jbd_revoke_table_s;
* @h_jdata: flag to force data journaling
* @h_aborted: flag indicating fatal error on handle
* @h_lockdep_map: lockdep info for debugging lock problems
- **/
-
-/* Docbook can't yet cope with the bit fields, but will leave the documentation
- * in so it can be fixed later.
*/
-
struct handle_s
{
/* Which compound transaction is this update a part of? */
@@ -558,8 +552,7 @@ struct transaction_s
};
/**
- * struct journal_s - The journal_s type is the concrete type associated with
- * journal_t.
+ * struct journal_s - this is the concrete type associated with journal_t.
* @j_flags: General journaling state flags
* @j_errno: Is there an outstanding uncleared error on the journal (from a
* prior abort)?
diff --git a/include/linux/lguest_launcher.h b/include/linux/lguest_launcher.h
index 589be3e1f3a..e7217dc58f3 100644
--- a/include/linux/lguest_launcher.h
+++ b/include/linux/lguest_launcher.h
@@ -16,6 +16,10 @@
* a new device, we simply need to write a new virtio driver and create support
* for it in the Launcher: this code won't need to change.
*
+ * Virtio devices are also used by kvm, so we can simply reuse their optimized
+ * device drivers. And one day when everyone uses virtio, my plan will be
+ * complete. Bwahahahah!
+ *
* Devices are described by a simplified ID, a status byte, and some "config"
* bytes which describe this device's configuration. This is placed by the
* Launcher just above the top of physical memory:
@@ -26,7 +30,7 @@ struct lguest_device_desc {
/* The number of virtqueues (first in config array) */
__u8 num_vq;
/* The number of bytes of feature bits. Multiply by 2: one for host
- * features and one for guest acknowledgements. */
+ * features and one for Guest acknowledgements. */
__u8 feature_len;
/* The number of bytes of the config array after virtqueues. */
__u8 config_len;
diff --git a/include/linux/libata.h b/include/linux/libata.h
index a05f6001364..b064bfeb69e 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -295,6 +295,7 @@ enum {
ATA_EH_SOFTRESET = (1 << 1),
ATA_EH_HARDRESET = (1 << 2),
ATA_EH_ENABLE_LINK = (1 << 3),
+ ATA_EH_LPM = (1 << 4), /* link power management action */
ATA_EH_RESET_MASK = ATA_EH_SOFTRESET | ATA_EH_HARDRESET,
ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE,
@@ -304,7 +305,6 @@ enum {
ATA_EHI_RESUME_LINK = (1 << 1), /* resume link (reset modifier) */
ATA_EHI_NO_AUTOPSY = (1 << 2), /* no autopsy */
ATA_EHI_QUIET = (1 << 3), /* be quiet */
- ATA_EHI_LPM = (1 << 4), /* link power management action */
ATA_EHI_DID_SOFTRESET = (1 << 16), /* already soft-reset this port */
ATA_EHI_DID_HARDRESET = (1 << 17), /* already soft-reset this port */
@@ -463,6 +463,7 @@ struct ata_queued_cmd {
unsigned int sect_size;
unsigned int nbytes;
+ unsigned int extrabytes;
unsigned int curbytes;
struct scatterlist *cursg;
@@ -1336,6 +1337,11 @@ static inline struct ata_queued_cmd *ata_qc_from_tag(struct ata_port *ap,
return NULL;
}
+static inline unsigned int ata_qc_raw_nbytes(struct ata_queued_cmd *qc)
+{
+ return qc->nbytes - min(qc->extrabytes, qc->nbytes);
+}
+
static inline void ata_tf_init(struct ata_device *dev, struct ata_taskfile *tf)
{
memset(tf, 0, sizeof(*tf));
@@ -1354,7 +1360,7 @@ static inline void ata_qc_reinit(struct ata_queued_cmd *qc)
qc->flags = 0;
qc->cursg = NULL;
qc->cursg_ofs = 0;
- qc->nbytes = qc->curbytes = 0;
+ qc->nbytes = qc->extrabytes = qc->curbytes = 0;
qc->n_elem = 0;
qc->err_mask = 0;
qc->sect_size = ATA_SECT_SIZE;
diff --git a/include/linux/memstick.h b/include/linux/memstick.h
index b7ee2588883..3e686ec6a96 100644
--- a/include/linux/memstick.h
+++ b/include/linux/memstick.h
@@ -239,7 +239,6 @@ struct memstick_request {
unsigned char tpc;
unsigned char data_dir:1,
need_card_int:1,
- get_int_reg:1,
long_data:1;
unsigned char int_reg;
int error;
diff --git a/include/linux/mount.h b/include/linux/mount.h
index 6d3047d8c91..5ee2df217cd 100644
--- a/include/linux/mount.h
+++ b/include/linux/mount.h
@@ -61,6 +61,7 @@ struct vfsmount {
atomic_t mnt_count;
int mnt_expiry_mark; /* true if marked for expiry */
int mnt_pinned;
+ int mnt_ghosts;
};
static inline struct vfsmount *mntget(struct vfsmount *mnt)
@@ -98,7 +99,6 @@ extern int do_add_mount(struct vfsmount *newmnt, struct nameidata *nd,
int mnt_flags, struct list_head *fslist);
extern void mark_mounts_for_expiry(struct list_head *mounts);
-extern void shrink_submounts(struct vfsmount *mountpoint, struct list_head *mounts);
extern spinlock_t vfsmount_lock;
extern dev_t name_to_dev_t(char *name);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index b7e4b633c69..ea760e519c4 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -513,7 +513,6 @@ int pci_find_next_capability(struct pci_dev *dev, u8 pos, int cap);
int pci_find_ext_capability(struct pci_dev *dev, int cap);
int pci_find_ht_capability(struct pci_dev *dev, int ht_cap);
int pci_find_next_ht_capability(struct pci_dev *dev, int pos, int ht_cap);
-void pcie_wait_pending_transaction(struct pci_dev *dev);
struct pci_bus *pci_find_next_bus(const struct pci_bus *from);
struct pci_dev *pci_get_device(unsigned int vendor, unsigned int device,
@@ -884,9 +883,6 @@ static inline int pci_find_ext_capability(struct pci_dev *dev, int cap)
return 0;
}
-static inline void pcie_wait_pending_transaction(struct pci_dev *dev)
-{ }
-
/* Power management related routines */
static inline int pci_save_state(struct pci_dev *dev)
{
diff --git a/include/linux/pnp.h b/include/linux/pnp.h
index cd6332b8882..29dd55838e8 100644
--- a/include/linux/pnp.h
+++ b/include/linux/pnp.h
@@ -14,7 +14,7 @@
#include <linux/mod_devicetable.h>
#define PNP_MAX_PORT 40
-#define PNP_MAX_MEM 12
+#define PNP_MAX_MEM 24
#define PNP_MAX_IRQ 2
#define PNP_MAX_DMA 2
#define PNP_NAME_LEN 50
diff --git a/include/linux/ps2esdi.h b/include/linux/ps2esdi.h
deleted file mode 100644
index c0e050b1dfe..00000000000
--- a/include/linux/ps2esdi.h
+++ /dev/null
@@ -1,98 +0,0 @@
-#ifndef _PS2ESDI_H_
-#define _PS2ESDI_H_
-
-#define NRML_ESDI_ID 0xddff
-#define INTG_ESDI_ID 0xdf9f
-
-#define PRIMARY_IO_BASE 0x3510
-#define ALT_IO_BASE 0x3518
-
-#define ESDI_CMD_INT (io_base+0)
-#define ESDI_STT_INT (io_base+0)
-#define ESDI_CONTROL (io_base+2)
-#define ESDI_STATUS (io_base+2)
-#define ESDI_ATTN (io_base+3)
-#define ESDI_INTRPT (io_base+3)
-
-#define STATUS_ENABLED 0x01
-#define STATUS_ALTERNATE 0x02
-#define STATUS_BUSY 0x10
-#define STATUS_STAT_AVAIL 0x08
-#define STATUS_INTR 0x01
-#define STATUS_RESET_FAIL 0xea
-#define STATUS_CMD_INF 0x04
-
-#define CTRL_SOFT_RESET 0xe4
-#define CTRL_HARD_RESET 0x80
-#define CTRL_EOI 0xe2
-#define CTRL_ENABLE_DMA 0x02
-#define CTRL_ENABLE_INTR 0x01
-#define CTRL_DISABLE_INTR 0x00
-
-#define ATT_EOI 0x02
-
-/* bits of word 0 of configuration status block. more info see p.38 of tech ref */
-#define CONFIG_IS 0x10 /* Invalid Secondary */
-#define CONFIG_ZD 0x08 /* Zero Defect */
-#define CONFIG_SF 0x04 /* Skewed Format */
-#define CONFIG_FR 0x02 /* Removable */
-#define CONFIG_RT 0x01 /* Retries */
-
-#define PORT_SYS_A 0x92
-#define PORT_DMA_FN 0x18
-#define PORT_DMA_EX 0x1a
-
-#define ON (unsigned char)0x40
-#define OFF (unsigned char)~ON
-#define LITE_ON outb(inb(PORT_SYS_A) | ON,PORT_SYS_A)
-#define LITE_OFF outb((inb(PORT_SYS_A) & OFF),PORT_SYS_A)
-
-#define FAIL 0
-#define SUCCES 1
-
-#define INT_CMD_COMPLETE 0x01
-#define INT_CMD_ECC 0x03
-#define INT_CMD_RETRY 0x05
-#define INT_CMD_FORMAT 0x06
-#define INT_CMD_ECC_RETRY 0x07
-#define INT_CMD_WARNING 0x08
-#define INT_CMD_ABORT 0x09
-#define INT_RESET 0x0A
-#define INT_TRANSFER_REQ 0x0B
-#define INT_CMD_FAILED 0x0C
-#define INT_DMA_ERR 0x0D
-#define INT_CMD_BLK_ERR 0x0E
-#define INT_ATTN_ERROR 0x0F
-
-#define DMA_MASK_CHAN 0x90
-#define DMA_UNMASK_CHAN 0xA0
-#define DMA_WRITE_ADDR 0x20
-#define DMA_WRITE_TC 0x40
-#define DMA_WRITE_MODE 0x70
-
-#define CMD_GET_DEV_CONFIG 0x09
-#define CMD_READ 0x4601
-#define CMD_WRITE 0x4602
-#define DMA_READ_16 0x4C
-#define DMA_WRITE_16 0x44
-
-
-#define MB 1024*1024
-#define SECT_SIZE 512
-
-#define ERROR 1
-#define OK 0
-
-#define HDIO_GETGEO 0x0301
-
-#define FALSE 0
-#define TRUE !FALSE
-
-struct ps2esdi_geometry {
- unsigned char heads;
- unsigned char sectors;
- unsigned short cylinders;
- unsigned long start;
-};
-
-#endif /* _PS2ESDI_H_ */
diff --git a/include/linux/rcupreempt.h b/include/linux/rcupreempt.h
index 01152ed532c..d038aa6e5ee 100644
--- a/include/linux/rcupreempt.h
+++ b/include/linux/rcupreempt.h
@@ -87,15 +87,15 @@ DECLARE_PER_CPU(long, dynticks_progress_counter);
static inline void rcu_enter_nohz(void)
{
+ smp_mb(); /* CPUs seeing ++ must see prior RCU read-side crit sects */
__get_cpu_var(dynticks_progress_counter)++;
WARN_ON(__get_cpu_var(dynticks_progress_counter) & 0x1);
- mb();
}
static inline void rcu_exit_nohz(void)
{
- mb();
__get_cpu_var(dynticks_progress_counter)++;
+ smp_mb(); /* CPUs seeing ++ must see later RCU read-side crit sects */
WARN_ON(!(__get_cpu_var(dynticks_progress_counter) & 0x1));
}
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 11d8e9a74ef..6a1e7afb099 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -790,6 +790,7 @@ struct sched_domain {
};
extern void partition_sched_domains(int ndoms_new, cpumask_t *doms_new);
+extern int arch_reinit_sched_domains(void);
#endif /* CONFIG_SMP */
@@ -929,6 +930,9 @@ struct sched_entity {
u64 vruntime;
u64 prev_sum_exec_runtime;
+ u64 last_wakeup;
+ u64 avg_overlap;
+
#ifdef CONFIG_SCHEDSTATS
u64 wait_start;
u64 wait_max;
@@ -1537,6 +1541,12 @@ static inline void idle_task_exit(void) {}
extern void sched_idle_next(void);
+#if defined(CONFIG_NO_HZ) && defined(CONFIG_SMP)
+extern void wake_up_idle_cpu(int cpu);
+#else
+static inline void wake_up_idle_cpu(int cpu) { }
+#endif
+
#ifdef CONFIG_SCHED_DEBUG
extern unsigned int sysctl_sched_latency;
extern unsigned int sysctl_sched_min_granularity;
diff --git a/include/linux/security.h b/include/linux/security.h
index b07357ca213..c673dfd4dff 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -57,7 +57,6 @@ extern int cap_inode_need_killpriv(struct dentry *dentry);
extern int cap_inode_killpriv(struct dentry *dentry);
extern int cap_task_post_setuid (uid_t old_ruid, uid_t old_euid, uid_t old_suid, int flags);
extern void cap_task_reparent_to_init (struct task_struct *p);
-extern int cap_task_kill(struct task_struct *p, struct siginfo *info, int sig, u32 secid);
extern int cap_task_setscheduler (struct task_struct *p, int policy, struct sched_param *lp);
extern int cap_task_setioprio (struct task_struct *p, int ioprio);
extern int cap_task_setnice (struct task_struct *p, int nice);
@@ -2187,7 +2186,7 @@ static inline int security_task_kill (struct task_struct *p,
struct siginfo *info, int sig,
u32 secid)
{
- return cap_task_kill(p, info, sig, secid);
+ return 0;
}
static inline int security_task_wait (struct task_struct *p)
diff --git a/include/linux/topology.h b/include/linux/topology.h
index 2352f46160d..bd14f8b30f0 100644
--- a/include/linux/topology.h
+++ b/include/linux/topology.h
@@ -50,6 +50,8 @@
for_each_online_node(node) \
if (nr_cpus_node(node))
+void arch_update_cpu_topology(void);
+
/* Conform to ACPI 2.0 SLIT distance definitions */
#define LOCAL_DISTANCE 10
#define REMOTE_DISTANCE 20
@@ -138,7 +140,6 @@
| SD_BALANCE_FORK \
| SD_BALANCE_EXEC \
| SD_WAKE_AFFINE \
- | SD_WAKE_IDLE \
| SD_SHARE_PKG_RESOURCES\
| BALANCE_FOR_MC_POWER, \
.last_balance = jiffies, \
diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h
index 2692ec9389c..1f999ec8d08 100644
--- a/include/linux/usb/quirks.h
+++ b/include/linux/usb/quirks.h
@@ -9,3 +9,6 @@
/* device can't resume correctly so reset it instead */
#define USB_QUIRK_RESET_RESUME 0x00000002
+
+/* device can't handle Set-Interface requests */
+#define USB_QUIRK_NO_SET_INTF 0x00000004
diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h
index cee0623b3c7..0a40dfa44c9 100644
--- a/include/linux/usb_usual.h
+++ b/include/linux/usb_usual.h
@@ -50,7 +50,9 @@
US_FLAG(CAPACITY_HEURISTICS, 0x00001000) \
/* sometimes sizes is too big */ \
US_FLAG(MAX_SECTORS_MIN,0x00002000) \
- /* Sets max_sectors to arch min */
+ /* Sets max_sectors to arch min */ \
+ US_FLAG(BULK_IGNORE_TAG,0x00004000) \
+ /* Ignore tag mismatch in bulk operations */
#define US_FLAG(name, value) US_FL_##name = value ,
diff --git a/kernel/acct.c b/kernel/acct.c
index 521dfa53cb9..91e1cfd734d 100644
--- a/kernel/acct.c
+++ b/kernel/acct.c
@@ -58,6 +58,7 @@
#include <asm/uaccess.h>
#include <asm/div64.h>
#include <linux/blkdev.h> /* sector_div */
+#include <linux/pid_namespace.h>
/*
* These constants control the amount of freespace that suspend and
@@ -74,7 +75,7 @@ int acct_parm[3] = {4, 2, 30};
/*
* External references and all of the globals.
*/
-static void do_acct_process(struct file *);
+static void do_acct_process(struct pid_namespace *ns, struct file *);
/*
* This structure is used so that all the data protected by lock
@@ -86,6 +87,7 @@ struct acct_glbs {
volatile int active;
volatile int needcheck;
struct file *file;
+ struct pid_namespace *ns;
struct timer_list timer;
};
@@ -175,9 +177,11 @@ out:
static void acct_file_reopen(struct file *file)
{
struct file *old_acct = NULL;
+ struct pid_namespace *old_ns = NULL;
if (acct_globals.file) {
old_acct = acct_globals.file;
+ old_ns = acct_globals.ns;
del_timer(&acct_globals.timer);
acct_globals.active = 0;
acct_globals.needcheck = 0;
@@ -185,6 +189,7 @@ static void acct_file_reopen(struct file *file)
}
if (file) {
acct_globals.file = file;
+ acct_globals.ns = get_pid_ns(task_active_pid_ns(current));
acct_globals.needcheck = 0;
acct_globals.active = 1;
/* It's been deleted if it was used before so this is safe */
@@ -196,8 +201,9 @@ static void acct_file_reopen(struct file *file)
if (old_acct) {
mnt_unpin(old_acct->f_path.mnt);
spin_unlock(&acct_globals.lock);
- do_acct_process(old_acct);
+ do_acct_process(old_ns, old_acct);
filp_close(old_acct, NULL);
+ put_pid_ns(old_ns);
spin_lock(&acct_globals.lock);
}
}
@@ -419,7 +425,7 @@ static u32 encode_float(u64 value)
/*
* do_acct_process does all actual work. Caller holds the reference to file.
*/
-static void do_acct_process(struct file *file)
+static void do_acct_process(struct pid_namespace *ns, struct file *file)
{
struct pacct_struct *pacct = &current->signal->pacct;
acct_t ac;
@@ -481,8 +487,10 @@ static void do_acct_process(struct file *file)
ac.ac_gid16 = current->gid;
#endif
#if ACCT_VERSION==3
- ac.ac_pid = current->tgid;
- ac.ac_ppid = current->real_parent->tgid;
+ ac.ac_pid = task_tgid_nr_ns(current, ns);
+ rcu_read_lock();
+ ac.ac_ppid = task_tgid_nr_ns(rcu_dereference(current->real_parent), ns);
+ rcu_read_unlock();
#endif
spin_lock_irq(&current->sighand->siglock);
@@ -578,6 +586,7 @@ void acct_collect(long exitcode, int group_dead)
void acct_process(void)
{
struct file *file = NULL;
+ struct pid_namespace *ns;
/*
* accelerate the common fastpath:
@@ -592,8 +601,10 @@ void acct_process(void)
return;
}
get_file(file);
+ ns = get_pid_ns(acct_globals.ns);
spin_unlock(&acct_globals.lock);
- do_acct_process(file);
+ do_acct_process(ns, file);
fput(file);
+ put_pid_ns(ns);
}
diff --git a/kernel/audit.c b/kernel/audit.c
index be55cb50363..b782b046543 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -1269,8 +1269,8 @@ static void audit_log_n_string(struct audit_buffer *ab, size_t slen,
/**
* audit_string_contains_control - does a string need to be logged in hex
- * @string - string to be checked
- * @len - max length of the string to check
+ * @string: string to be checked
+ * @len: max length of the string to check
*/
int audit_string_contains_control(const char *string, size_t len)
{
@@ -1285,7 +1285,7 @@ int audit_string_contains_control(const char *string, size_t len)
/**
* audit_log_n_untrustedstring - log a string that may contain random characters
* @ab: audit_buffer
- * @len: lenth of string (not including trailing null)
+ * @len: length of string (not including trailing null)
* @string: string to be logged
*
* This code will escape a string that is passed to it if the string
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index e9c2fb01e89..53d86b4b0ce 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -2082,7 +2082,7 @@ static int cgroup_tasks_open(struct inode *unused, struct file *file)
kfree(pidarray);
} else {
- ctr->buf = 0;
+ ctr->buf = NULL;
ctr->bufsz = 0;
}
file->private_data = ctr;
@@ -2614,7 +2614,7 @@ static int proc_cgroupstats_show(struct seq_file *m, void *v)
static int cgroupstats_open(struct inode *inode, struct file *file)
{
- return single_open(file, proc_cgroupstats_show, 0);
+ return single_open(file, proc_cgroupstats_show, NULL);
}
static struct file_operations proc_cgroupstats_operations = {
diff --git a/kernel/fork.c b/kernel/fork.c
index dd249c37b3a..9c042f90157 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -394,7 +394,6 @@ void __mmdrop(struct mm_struct *mm)
{
BUG_ON(mm == &init_mm);
mm_free_pgd(mm);
- mm_free_cgroup(mm);
destroy_context(mm);
free_mm(mm);
}
@@ -416,6 +415,7 @@ void mmput(struct mm_struct *mm)
spin_unlock(&mmlist_lock);
}
put_swap_token(mm);
+ mm_free_cgroup(mm);
mmdrop(mm);
}
}
diff --git a/kernel/futex.c b/kernel/futex.c
index 06968cd7920..e43945e995f 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -281,7 +281,7 @@ static int get_futex_key(u32 __user *uaddr, struct rw_semaphore *fshared,
*/
static void get_futex_key_refs(union futex_key *key)
{
- if (key->both.ptr == 0)
+ if (key->both.ptr == NULL)
return;
switch (key->both.offset & (FUT_OFF_INODE|FUT_OFF_MMSHARED)) {
case FUT_OFF_INODE:
@@ -2158,7 +2158,7 @@ static struct file_system_type futex_fs_type = {
.kill_sb = kill_anon_super,
};
-static int __init init(void)
+static int __init futex_init(void)
{
u32 curval;
int i;
@@ -2194,4 +2194,4 @@ static int __init init(void)
return 0;
}
-__initcall(init);
+__initcall(futex_init);
diff --git a/kernel/futex_compat.c b/kernel/futex_compat.c
index ff90f049f8f..04ac3a9e42c 100644
--- a/kernel/futex_compat.c
+++ b/kernel/futex_compat.c
@@ -30,7 +30,7 @@ fetch_robust_entry(compat_uptr_t *uentry, struct robust_list __user **entry,
return 0;
}
-static void __user *futex_uaddr(struct robust_list *entry,
+static void __user *futex_uaddr(struct robust_list __user *entry,
compat_long_t futex_offset)
{
compat_uptr_t base = ptr_to_compat(entry);
diff --git a/kernel/marker.c b/kernel/marker.c
index 48a4ea5afff..005b9595459 100644
--- a/kernel/marker.c
+++ b/kernel/marker.c
@@ -104,18 +104,18 @@ void marker_probe_cb(const struct marker *mdata, void *call_private,
char ptype;
/*
- * disabling preemption to make sure the teardown of the callbacks can
- * be done correctly when they are in modules and they insure RCU read
- * coherency.
+ * preempt_disable does two things : disabling preemption to make sure
+ * the teardown of the callbacks can be done correctly when they are in
+ * modules and they insure RCU read coherency.
*/
preempt_disable();
- ptype = ACCESS_ONCE(mdata->ptype);
+ ptype = mdata->ptype;
if (likely(!ptype)) {
marker_probe_func *func;
/* Must read the ptype before ptr. They are not data dependant,
* so we put an explicit smp_rmb() here. */
smp_rmb();
- func = ACCESS_ONCE(mdata->single.func);
+ func = mdata->single.func;
/* Must read the ptr before private data. They are not data
* dependant, so we put an explicit smp_rmb() here. */
smp_rmb();
@@ -133,7 +133,7 @@ void marker_probe_cb(const struct marker *mdata, void *call_private,
* in the fast path, so put the explicit barrier here.
*/
smp_read_barrier_depends();
- multi = ACCESS_ONCE(mdata->multi);
+ multi = mdata->multi;
for (i = 0; multi[i].func; i++) {
va_start(args, fmt);
multi[i].func(multi[i].probe_private, call_private, fmt,
@@ -161,13 +161,13 @@ void marker_probe_cb_noarg(const struct marker *mdata,
char ptype;
preempt_disable();
- ptype = ACCESS_ONCE(mdata->ptype);
+ ptype = mdata->ptype;
if (likely(!ptype)) {
marker_probe_func *func;
/* Must read the ptype before ptr. They are not data dependant,
* so we put an explicit smp_rmb() here. */
smp_rmb();
- func = ACCESS_ONCE(mdata->single.func);
+ func = mdata->single.func;
/* Must read the ptr before private data. They are not data
* dependant, so we put an explicit smp_rmb() here. */
smp_rmb();
@@ -183,7 +183,7 @@ void marker_probe_cb_noarg(const struct marker *mdata,
* in the fast path, so put the explicit barrier here.
*/
smp_read_barrier_depends();
- multi = ACCESS_ONCE(mdata->multi);
+ multi = mdata->multi;
for (i = 0; multi[i].func; i++)
multi[i].func(multi[i].probe_private, call_private, fmt,
&args);
@@ -551,9 +551,9 @@ static int set_marker(struct marker_entry **entry, struct marker *elem,
/*
* Disable a marker and its probe callback.
- * Note: only after a synchronize_sched() issued after setting elem->call to the
- * empty function insures that the original callback is not used anymore. This
- * insured by preemption disabling around the call site.
+ * Note: only waiting an RCU period after setting elem->call to the empty
+ * function insures that the original callback is not used anymore. This insured
+ * by preempt_disable around the call site.
*/
static void disable_marker(struct marker *elem)
{
@@ -565,8 +565,8 @@ static void disable_marker(struct marker *elem)
elem->ptype = 0; /* single probe */
/*
* Leave the private data and id there, because removal is racy and
- * should be done only after a synchronize_sched(). These are never used
- * until the next initialization anyway.
+ * should be done only after an RCU period. These are never used until
+ * the next initialization anyway.
*/
}
@@ -601,9 +601,6 @@ void marker_update_probe_range(struct marker *begin,
/*
* Update probes, removing the faulty probes.
- * Issues a synchronize_sched() when no reference to the module passed
- * as parameter is found in the probes so the probe module can be
- * safely unloaded from now on.
*
* Internal callback only changed before the first probe is connected to it.
* Single probe private data can only be changed on 0 -> 1 and 2 -> 1
@@ -674,6 +671,9 @@ int marker_probe_register(const char *name, const char *format,
entry->rcu_pending = 1;
/* write rcu_pending before calling the RCU callback */
smp_wmb();
+#ifdef CONFIG_PREEMPT_RCU
+ synchronize_sched(); /* Until we have the call_rcu_sched() */
+#endif
call_rcu(&entry->rcu, free_old_closure);
end:
mutex_unlock(&markers_mutex);
@@ -717,6 +717,9 @@ int marker_probe_unregister(const char *name,
entry->rcu_pending = 1;
/* write rcu_pending before calling the RCU callback */
smp_wmb();
+#ifdef CONFIG_PREEMPT_RCU
+ synchronize_sched(); /* Until we have the call_rcu_sched() */
+#endif
call_rcu(&entry->rcu, free_old_closure);
remove_marker(name); /* Ignore busy error message */
ret = 0;
@@ -795,6 +798,9 @@ int marker_probe_unregister_private_data(marker_probe_func *probe,
entry->rcu_pending = 1;
/* write rcu_pending before calling the RCU callback */
smp_wmb();
+#ifdef CONFIG_PREEMPT_RCU
+ synchronize_sched(); /* Until we have the call_rcu_sched() */
+#endif
call_rcu(&entry->rcu, free_old_closure);
remove_marker(entry->name); /* Ignore busy error message */
end:
diff --git a/kernel/printk.c b/kernel/printk.c
index 9adc2a473e6..c46a20a19a1 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -616,6 +616,40 @@ asmlinkage int printk(const char *fmt, ...)
/* cpu currently holding logbuf_lock */
static volatile unsigned int printk_cpu = UINT_MAX;
+/*
+ * Can we actually use the console at this time on this cpu?
+ *
+ * Console drivers may assume that per-cpu resources have
+ * been allocated. So unless they're explicitly marked as
+ * being able to cope (CON_ANYTIME) don't call them until
+ * this CPU is officially up.
+ */
+static inline int can_use_console(unsigned int cpu)
+{
+ return cpu_online(cpu) || have_callable_console();
+}
+
+/*
+ * Try to get console ownership to actually show the kernel
+ * messages from a 'printk'. Return true (and with the
+ * console_semaphore held, and 'console_locked' set) if it
+ * is successful, false otherwise.
+ *
+ * This gets called with the 'logbuf_lock' spinlock held and
+ * interrupts disabled. It should return with 'lockbuf_lock'
+ * released but interrupts still disabled.
+ */
+static int acquire_console_semaphore_for_printk(unsigned int cpu)
+{
+ int retval = 0;
+
+ if (can_use_console(cpu))
+ retval = !try_acquire_console_sem();
+ printk_cpu = UINT_MAX;
+ spin_unlock(&logbuf_lock);
+ return retval;
+}
+
const char printk_recursion_bug_msg [] =
KERN_CRIT "BUG: recent printk recursion!\n";
static int printk_recursion_bug;
@@ -725,43 +759,22 @@ asmlinkage int vprintk(const char *fmt, va_list args)
log_level_unknown = 1;
}
- if (!down_trylock(&console_sem)) {
- /*
- * We own the drivers. We can drop the spinlock and
- * let release_console_sem() print the text, maybe ...
- */
- console_locked = 1;
- printk_cpu = UINT_MAX;
- spin_unlock(&logbuf_lock);
+ /*
+ * Try to acquire and then immediately release the
+ * console semaphore. The release will do all the
+ * actual magic (print out buffers, wake up klogd,
+ * etc).
+ *
+ * The acquire_console_semaphore_for_printk() function
+ * will release 'logbuf_lock' regardless of whether it
+ * actually gets the semaphore or not.
+ */
+ if (acquire_console_semaphore_for_printk(this_cpu))
+ release_console_sem();
- /*
- * Console drivers may assume that per-cpu resources have
- * been allocated. So unless they're explicitly marked as
- * being able to cope (CON_ANYTIME) don't call them until
- * this CPU is officially up.
- */
- if (cpu_online(smp_processor_id()) || have_callable_console()) {
- console_may_schedule = 0;
- release_console_sem();
- } else {
- /* Release by hand to avoid flushing the buffer. */
- console_locked = 0;
- up(&console_sem);
- }
- lockdep_on();
- raw_local_irq_restore(flags);
- } else {
- /*
- * Someone else owns the drivers. We drop the spinlock, which
- * allows the semaphore holder to proceed and to call the
- * console drivers with the output which we just produced.
- */
- printk_cpu = UINT_MAX;
- spin_unlock(&logbuf_lock);
- lockdep_on();
+ lockdep_on();
out_restore_irqs:
- raw_local_irq_restore(flags);
- }
+ raw_local_irq_restore(flags);
preempt_enable();
return printed_len;
diff --git a/kernel/relay.c b/kernel/relay.c
index d080b9d161a..d6204a48581 100644
--- a/kernel/relay.c
+++ b/kernel/relay.c
@@ -736,7 +736,7 @@ static int relay_file_open(struct inode *inode, struct file *filp)
kref_get(&buf->kref);
filp->private_data = buf;
- return 0;
+ return nonseekable_open(inode, filp);
}
/**
@@ -1056,6 +1056,10 @@ static struct pipe_buf_operations relay_pipe_buf_ops = {
.get = generic_pipe_buf_get,
};
+static void relay_page_release(struct splice_pipe_desc *spd, unsigned int i)
+{
+}
+
/*
* subbuf_splice_actor - splice up to one subbuf's worth of data
*/
@@ -1066,7 +1070,7 @@ static int subbuf_splice_actor(struct file *in,
unsigned int flags,
int *nonpad_ret)
{
- unsigned int pidx, poff, total_len, subbuf_pages, ret;
+ unsigned int pidx, poff, total_len, subbuf_pages, nr_pages, ret;
struct rchan_buf *rbuf = in->private_data;
unsigned int subbuf_size = rbuf->chan->subbuf_size;
uint64_t pos = (uint64_t) *ppos;
@@ -1083,6 +1087,7 @@ static int subbuf_splice_actor(struct file *in,
.partial = partial,
.flags = flags,
.ops = &relay_pipe_buf_ops,
+ .spd_release = relay_page_release,
};
if (rbuf->subbufs_produced == rbuf->subbufs_consumed)
@@ -1097,8 +1102,9 @@ static int subbuf_splice_actor(struct file *in,
subbuf_pages = rbuf->chan->alloc_size >> PAGE_SHIFT;
pidx = (read_start / PAGE_SIZE) % subbuf_pages;
poff = read_start & ~PAGE_MASK;
+ nr_pages = min_t(unsigned int, subbuf_pages, PIPE_BUFFERS);
- for (total_len = 0; spd.nr_pages < subbuf_pages; spd.nr_pages++) {
+ for (total_len = 0; spd.nr_pages < nr_pages; spd.nr_pages++) {
unsigned int this_len, this_end, private;
unsigned int cur_pos = read_start + total_len;
diff --git a/kernel/sched.c b/kernel/sched.c
index d1ad69b270c..8dcdec6fe0f 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -594,18 +594,14 @@ enum {
SCHED_FEAT_NEW_FAIR_SLEEPERS = 1,
SCHED_FEAT_WAKEUP_PREEMPT = 2,
SCHED_FEAT_START_DEBIT = 4,
- SCHED_FEAT_TREE_AVG = 8,
- SCHED_FEAT_APPROX_AVG = 16,
- SCHED_FEAT_HRTICK = 32,
- SCHED_FEAT_DOUBLE_TICK = 64,
+ SCHED_FEAT_HRTICK = 8,
+ SCHED_FEAT_DOUBLE_TICK = 16,
};
const_debug unsigned int sysctl_sched_features =
SCHED_FEAT_NEW_FAIR_SLEEPERS * 1 |
SCHED_FEAT_WAKEUP_PREEMPT * 1 |
SCHED_FEAT_START_DEBIT * 1 |
- SCHED_FEAT_TREE_AVG * 0 |
- SCHED_FEAT_APPROX_AVG * 0 |
SCHED_FEAT_HRTICK * 1 |
SCHED_FEAT_DOUBLE_TICK * 0;
@@ -1056,6 +1052,49 @@ static void resched_cpu(int cpu)
resched_task(cpu_curr(cpu));
spin_unlock_irqrestore(&rq->lock, flags);
}
+
+#ifdef CONFIG_NO_HZ
+/*
+ * When add_timer_on() enqueues a timer into the timer wheel of an
+ * idle CPU then this timer might expire before the next timer event
+ * which is scheduled to wake up that CPU. In case of a completely
+ * idle system the next event might even be infinite time into the
+ * future. wake_up_idle_cpu() ensures that the CPU is woken up and
+ * leaves the inner idle loop so the newly added timer is taken into
+ * account when the CPU goes back to idle and evaluates the timer
+ * wheel for the next timer event.
+ */
+void wake_up_idle_cpu(int cpu)
+{
+ struct rq *rq = cpu_rq(cpu);
+
+ if (cpu == smp_processor_id())
+ return;
+
+ /*
+ * This is safe, as this function is called with the timer
+ * wheel base lock of (cpu) held. When the CPU is on the way
+ * to idle and has not yet set rq->curr to idle then it will
+ * be serialized on the timer wheel base lock and take the new
+ * timer into account automatically.
+ */
+ if (rq->curr != rq->idle)
+ return;
+
+ /*
+ * We can set TIF_RESCHED on the idle task of the other CPU
+ * lockless. The worst case is that the other CPU runs the
+ * idle task through an additional NOOP schedule()
+ */
+ set_tsk_thread_flag(rq->idle, TIF_NEED_RESCHED);
+
+ /* NEED_RESCHED must be visible before we test polling */
+ smp_mb();
+ if (!tsk_is_polling(rq->idle))
+ smp_send_reschedule(cpu);
+}
+#endif
+
#else
static void __resched_task(struct task_struct *p, int tif_bit)
{
@@ -1396,6 +1435,12 @@ task_hot(struct task_struct *p, u64 now, struct sched_domain *sd)
{
s64 delta;
+ /*
+ * Buddy candidates are cache hot:
+ */
+ if (&p->se == cfs_rq_of(&p->se)->next)
+ return 1;
+
if (p->sched_class != &fair_sched_class)
return 0;
@@ -1855,10 +1900,11 @@ out_activate:
schedstat_inc(p, se.nr_wakeups_remote);
update_rq_clock(rq);
activate_task(rq, p, 1);
- check_preempt_curr(rq, p);
success = 1;
out_running:
+ check_preempt_curr(rq, p);
+
p->state = TASK_RUNNING;
#ifdef CONFIG_SMP
if (p->sched_class->task_wake_up)
@@ -1892,6 +1938,8 @@ static void __sched_fork(struct task_struct *p)
p->se.exec_start = 0;
p->se.sum_exec_runtime = 0;
p->se.prev_sum_exec_runtime = 0;
+ p->se.last_wakeup = 0;
+ p->se.avg_overlap = 0;
#ifdef CONFIG_SCHEDSTATS
p->se.wait_start = 0;
@@ -3877,7 +3925,7 @@ need_resched_nonpreemptible:
if (prev->state && !(preempt_count() & PREEMPT_ACTIVE)) {
if (unlikely((prev->state & TASK_INTERRUPTIBLE) &&
- unlikely(signal_pending(prev)))) {
+ signal_pending(prev))) {
prev->state = TASK_RUNNING;
} else {
deactivate_task(rq, prev, 1);
@@ -6802,6 +6850,10 @@ static int ndoms_cur; /* number of sched domains in 'doms_cur' */
*/
static cpumask_t fallback_doms;
+void __attribute__((weak)) arch_update_cpu_topology(void)
+{
+}
+
/*
* Set up scheduler domains and groups. Callers must hold the hotplug lock.
* For now this just excludes isolated cpus, but could be used to
@@ -6811,6 +6863,7 @@ static int arch_init_sched_domains(const cpumask_t *cpu_map)
{
int err;
+ arch_update_cpu_topology();
ndoms_cur = 1;
doms_cur = kmalloc(sizeof(cpumask_t), GFP_KERNEL);
if (!doms_cur)
@@ -6915,7 +6968,7 @@ match2:
}
#if defined(CONFIG_SCHED_MC) || defined(CONFIG_SCHED_SMT)
-static int arch_reinit_sched_domains(void)
+int arch_reinit_sched_domains(void)
{
int err;
diff --git a/kernel/sched_debug.c b/kernel/sched_debug.c
index 4b5e24cf2f4..ef358ba0768 100644
--- a/kernel/sched_debug.c
+++ b/kernel/sched_debug.c
@@ -288,6 +288,7 @@ void proc_sched_show_task(struct task_struct *p, struct seq_file *m)
PN(se.exec_start);
PN(se.vruntime);
PN(se.sum_exec_runtime);
+ PN(se.avg_overlap);
nr_switches = p->nvcsw + p->nivcsw;
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index f2cc59080ef..86a93376282 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -73,13 +73,13 @@ unsigned int sysctl_sched_batch_wakeup_granularity = 10000000UL;
/*
* SCHED_OTHER wake-up granularity.
- * (default: 10 msec * (1 + ilog(ncpus)), units: nanoseconds)
+ * (default: 5 msec * (1 + ilog(ncpus)), units: nanoseconds)
*
* This option delays the preemption effects of decoupled workloads
* and reduces their over-scheduling. Synchronous workloads will still
* have immediate wakeup/sleep latencies.
*/
-unsigned int sysctl_sched_wakeup_granularity = 10000000UL;
+unsigned int sysctl_sched_wakeup_granularity = 5000000UL;
const_debug unsigned int sysctl_sched_migration_cost = 500000UL;
@@ -302,11 +302,6 @@ static u64 __sched_vslice(unsigned long rq_weight, unsigned long nr_running)
return vslice;
}
-static u64 sched_vslice(struct cfs_rq *cfs_rq)
-{
- return __sched_vslice(cfs_rq->load.weight, cfs_rq->nr_running);
-}
-
static u64 sched_vslice_add(struct cfs_rq *cfs_rq, struct sched_entity *se)
{
return __sched_vslice(cfs_rq->load.weight + se->load.weight,
@@ -504,15 +499,6 @@ place_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int initial)
} else
vruntime = cfs_rq->min_vruntime;
- if (sched_feat(TREE_AVG)) {
- struct sched_entity *last = __pick_last_entity(cfs_rq);
- if (last) {
- vruntime += last->vruntime;
- vruntime >>= 1;
- }
- } else if (sched_feat(APPROX_AVG) && cfs_rq->nr_running)
- vruntime += sched_vslice(cfs_rq)/2;
-
/*
* The 'current' period is already promised to the current tasks,
* however the extra weight of the new task will slow them down a
@@ -556,6 +542,21 @@ enqueue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int wakeup)
account_entity_enqueue(cfs_rq, se);
}
+static void update_avg(u64 *avg, u64 sample)
+{
+ s64 diff = sample - *avg;
+ *avg += diff >> 3;
+}
+
+static void update_avg_stats(struct cfs_rq *cfs_rq, struct sched_entity *se)
+{
+ if (!se->last_wakeup)
+ return;
+
+ update_avg(&se->avg_overlap, se->sum_exec_runtime - se->last_wakeup);
+ se->last_wakeup = 0;
+}
+
static void
dequeue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int sleep)
{
@@ -566,6 +567,7 @@ dequeue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int sleep)
update_stats_dequeue(cfs_rq, se);
if (sleep) {
+ update_avg_stats(cfs_rq, se);
#ifdef CONFIG_SCHEDSTATS
if (entity_is_task(se)) {
struct task_struct *tsk = task_of(se);
@@ -980,96 +982,121 @@ static inline int wake_idle(int cpu, struct task_struct *p)
#endif
#ifdef CONFIG_SMP
-static int select_task_rq_fair(struct task_struct *p, int sync)
+
+static const struct sched_class fair_sched_class;
+
+static int
+wake_affine(struct rq *rq, struct sched_domain *this_sd, struct rq *this_rq,
+ struct task_struct *p, int prev_cpu, int this_cpu, int sync,
+ int idx, unsigned long load, unsigned long this_load,
+ unsigned int imbalance)
{
- int cpu, this_cpu;
- struct rq *rq;
- struct sched_domain *sd, *this_sd = NULL;
- int new_cpu;
+ struct task_struct *curr = this_rq->curr;
+ unsigned long tl = this_load;
+ unsigned long tl_per_task;
+
+ if (!(this_sd->flags & SD_WAKE_AFFINE))
+ return 0;
+
+ /*
+ * If the currently running task will sleep within
+ * a reasonable amount of time then attract this newly
+ * woken task:
+ */
+ if (sync && curr->sched_class == &fair_sched_class) {
+ if (curr->se.avg_overlap < sysctl_sched_migration_cost &&
+ p->se.avg_overlap < sysctl_sched_migration_cost)
+ return 1;
+ }
+
+ schedstat_inc(p, se.nr_wakeups_affine_attempts);
+ tl_per_task = cpu_avg_load_per_task(this_cpu);
+
+ /*
+ * If sync wakeup then subtract the (maximum possible)
+ * effect of the currently running task from the load
+ * of the current CPU:
+ */
+ if (sync)
+ tl -= current->se.load.weight;
+
+ if ((tl <= load && tl + target_load(prev_cpu, idx) <= tl_per_task) ||
+ 100*(tl + p->se.load.weight) <= imbalance*load) {
+ /*
+ * This domain has SD_WAKE_AFFINE and
+ * p is cache cold in this domain, and
+ * there is no bad imbalance.
+ */
+ schedstat_inc(this_sd, ttwu_move_affine);
+ schedstat_inc(p, se.nr_wakeups_affine);
- cpu = task_cpu(p);
- rq = task_rq(p);
- this_cpu = smp_processor_id();
- new_cpu = cpu;
+ return 1;
+ }
+ return 0;
+}
- if (cpu == this_cpu)
- goto out_set_cpu;
+static int select_task_rq_fair(struct task_struct *p, int sync)
+{
+ struct sched_domain *sd, *this_sd = NULL;
+ int prev_cpu, this_cpu, new_cpu;
+ unsigned long load, this_load;
+ struct rq *rq, *this_rq;
+ unsigned int imbalance;
+ int idx;
+
+ prev_cpu = task_cpu(p);
+ rq = task_rq(p);
+ this_cpu = smp_processor_id();
+ this_rq = cpu_rq(this_cpu);
+ new_cpu = prev_cpu;
+ /*
+ * 'this_sd' is the first domain that both
+ * this_cpu and prev_cpu are present in:
+ */
for_each_domain(this_cpu, sd) {
- if (cpu_isset(cpu, sd->span)) {
+ if (cpu_isset(prev_cpu, sd->span)) {
this_sd = sd;
break;
}
}
if (unlikely(!cpu_isset(this_cpu, p->cpus_allowed)))
- goto out_set_cpu;
+ goto out;
/*
* Check for affine wakeup and passive balancing possibilities.
*/
- if (this_sd) {
- int idx = this_sd->wake_idx;
- unsigned int imbalance;
- unsigned long load, this_load;
-
- imbalance = 100 + (this_sd->imbalance_pct - 100) / 2;
-
- load = source_load(cpu, idx);
- this_load = target_load(this_cpu, idx);
-
- new_cpu = this_cpu; /* Wake to this CPU if we can */
-
- if (this_sd->flags & SD_WAKE_AFFINE) {
- unsigned long tl = this_load;
- unsigned long tl_per_task;
-
- /*
- * Attract cache-cold tasks on sync wakeups:
- */
- if (sync && !task_hot(p, rq->clock, this_sd))
- goto out_set_cpu;
-
- schedstat_inc(p, se.nr_wakeups_affine_attempts);
- tl_per_task = cpu_avg_load_per_task(this_cpu);
-
- /*
- * If sync wakeup then subtract the (maximum possible)
- * effect of the currently running task from the load
- * of the current CPU:
- */
- if (sync)
- tl -= current->se.load.weight;
-
- if ((tl <= load &&
- tl + target_load(cpu, idx) <= tl_per_task) ||
- 100*(tl + p->se.load.weight) <= imbalance*load) {
- /*
- * This domain has SD_WAKE_AFFINE and
- * p is cache cold in this domain, and
- * there is no bad imbalance.
- */
- schedstat_inc(this_sd, ttwu_move_affine);
- schedstat_inc(p, se.nr_wakeups_affine);
- goto out_set_cpu;
- }
- }
+ if (!this_sd)
+ goto out;
- /*
- * Start passive balancing when half the imbalance_pct
- * limit is reached.
- */
- if (this_sd->flags & SD_WAKE_BALANCE) {
- if (imbalance*this_load <= 100*load) {
- schedstat_inc(this_sd, ttwu_move_balance);
- schedstat_inc(p, se.nr_wakeups_passive);
- goto out_set_cpu;
- }
+ idx = this_sd->wake_idx;
+
+ imbalance = 100 + (this_sd->imbalance_pct - 100) / 2;
+
+ load = source_load(prev_cpu, idx);
+ this_load = target_load(this_cpu, idx);
+
+ if (wake_affine(rq, this_sd, this_rq, p, prev_cpu, this_cpu, sync, idx,
+ load, this_load, imbalance))
+ return this_cpu;
+
+ if (prev_cpu == this_cpu)
+ goto out;
+
+ /*
+ * Start passive balancing when half the imbalance_pct
+ * limit is reached.
+ */
+ if (this_sd->flags & SD_WAKE_BALANCE) {
+ if (imbalance*this_load <= 100*load) {
+ schedstat_inc(this_sd, ttwu_move_balance);
+ schedstat_inc(p, se.nr_wakeups_passive);
+ return this_cpu;
}
}
- new_cpu = cpu; /* Could not wake to this_cpu. Wake to cpu instead */
-out_set_cpu:
+out:
return wake_idle(new_cpu, p);
}
#endif /* CONFIG_SMP */
@@ -1092,6 +1119,10 @@ static void check_preempt_wakeup(struct rq *rq, struct task_struct *p)
return;
}
+ se->last_wakeup = se->sum_exec_runtime;
+ if (unlikely(se == pse))
+ return;
+
cfs_rq_of(pse)->next = pse;
/*
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 548c436a776..7f60097d443 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -141,13 +141,8 @@ static void clocksource_watchdog(unsigned long data)
}
if (!list_empty(&watchdog_list)) {
- /* Cycle through CPUs to check if the CPUs stay synchronized to
- * each other. */
- int next_cpu = next_cpu(raw_smp_processor_id(), cpu_online_map);
- if (next_cpu >= NR_CPUS)
- next_cpu = first_cpu(cpu_online_map);
- watchdog_timer.expires += WATCHDOG_INTERVAL;
- add_timer_on(&watchdog_timer, next_cpu);
+ __mod_timer(&watchdog_timer,
+ watchdog_timer.expires + WATCHDOG_INTERVAL);
}
spin_unlock(&watchdog_lock);
}
@@ -169,7 +164,7 @@ static void clocksource_check_watchdog(struct clocksource *cs)
if (!started && watchdog) {
watchdog_last = watchdog->read();
watchdog_timer.expires = jiffies + WATCHDOG_INTERVAL;
- add_timer_on(&watchdog_timer, first_cpu(cpu_online_map));
+ add_timer(&watchdog_timer);
}
} else {
if (cs->flags & CLOCK_SOURCE_IS_CONTINUOUS)
@@ -179,7 +174,7 @@ static void clocksource_check_watchdog(struct clocksource *cs)
if (watchdog)
del_timer(&watchdog_timer);
watchdog = cs;
- init_timer_deferrable(&watchdog_timer);
+ init_timer(&watchdog_timer);
watchdog_timer.function = clocksource_watchdog;
/* Reset watchdog cycles */
@@ -190,8 +185,7 @@ static void clocksource_check_watchdog(struct clocksource *cs)
watchdog_last = watchdog->read();
watchdog_timer.expires =
jiffies + WATCHDOG_INTERVAL;
- add_timer_on(&watchdog_timer,
- first_cpu(cpu_online_map));
+ add_timer(&watchdog_timer);
}
}
}
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 671af612b76..a3fa587c350 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -191,8 +191,12 @@ static void change_clocksource(void)
tick_clock_notify();
+ /*
+ * We're holding xtime lock and waking up klogd would deadlock
+ * us on enqueue. So no printing!
printk(KERN_INFO "Time: %s clocksource has been installed.\n",
clock->name);
+ */
}
#else
static inline void change_clocksource(void) { }
diff --git a/kernel/timer.c b/kernel/timer.c
index 99b00a25f88..b024106daa7 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -451,10 +451,18 @@ void add_timer_on(struct timer_list *timer, int cpu)
spin_lock_irqsave(&base->lock, flags);
timer_set_base(timer, base);
internal_add_timer(base, timer);
+ /*
+ * Check whether the other CPU is idle and needs to be
+ * triggered to reevaluate the timer wheel when nohz is
+ * active. We are protected against the other CPU fiddling
+ * with the timer by holding the timer base lock. This also
+ * makes sure that a CPU on the way to idle can not evaluate
+ * the timer wheel.
+ */
+ wake_up_idle_cpu(cpu);
spin_unlock_irqrestore(&base->lock, flags);
}
-
/**
* mod_timer - modify a timer's timeout
* @timer: the timer to be modified
diff --git a/lib/iomap.c b/lib/iomap.c
index db004a9ff50..dd6ca48fe6b 100644
--- a/lib/iomap.c
+++ b/lib/iomap.c
@@ -256,7 +256,7 @@ EXPORT_SYMBOL(ioport_unmap);
* */
void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
{
- unsigned long start = pci_resource_start(dev, bar);
+ resource_size_t start = pci_resource_start(dev, bar);
unsigned long len = pci_resource_len(dev, bar);
unsigned long flags = pci_resource_flags(dev, bar);
diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c
index b06185ed189..9fb6b86cf6b 100644
--- a/lib/kobject_uevent.c
+++ b/lib/kobject_uevent.c
@@ -57,7 +57,7 @@ int kobject_action_type(const char *buf, size_t count,
enum kobject_action action;
int ret = -EINVAL;
- if (count && buf[count-1] == '\n')
+ if (count && (buf[count-1] == '\n' || buf[count-1] == '\0'))
count--;
if (!count)
diff --git a/mm/bootmem.c b/mm/bootmem.c
index f6ff4337b42..2ccea700968 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -125,6 +125,7 @@ static int __init reserve_bootmem_core(bootmem_data_t *bdata,
BUG_ON(!size);
BUG_ON(PFN_DOWN(addr) >= bdata->node_low_pfn);
BUG_ON(PFN_UP(addr + size) > bdata->node_low_pfn);
+ BUG_ON(addr < bdata->node_boot_start);
sidx = PFN_DOWN(addr - bdata->node_boot_start);
eidx = PFN_UP(addr + size - bdata->node_boot_start);
@@ -156,21 +157,31 @@ static void __init free_bootmem_core(bootmem_data_t *bdata, unsigned long addr,
unsigned long sidx, eidx;
unsigned long i;
+ BUG_ON(!size);
+
+ /* out range */
+ if (addr + size < bdata->node_boot_start ||
+ PFN_DOWN(addr) > bdata->node_low_pfn)
+ return;
/*
* round down end of usable mem, partially free pages are
* considered reserved.
*/
- BUG_ON(!size);
- BUG_ON(PFN_DOWN(addr + size) > bdata->node_low_pfn);
- if (addr < bdata->last_success)
+ if (addr >= bdata->node_boot_start && addr < bdata->last_success)
bdata->last_success = addr;
/*
- * Round up the beginning of the address.
+ * Round up to index to the range.
*/
- sidx = PFN_UP(addr) - PFN_DOWN(bdata->node_boot_start);
+ if (PFN_UP(addr) > PFN_DOWN(bdata->node_boot_start))
+ sidx = PFN_UP(addr) - PFN_DOWN(bdata->node_boot_start);
+ else
+ sidx = 0;
+
eidx = PFN_DOWN(addr + size - bdata->node_boot_start);
+ if (eidx > bdata->node_low_pfn - PFN_DOWN(bdata->node_boot_start))
+ eidx = bdata->node_low_pfn - PFN_DOWN(bdata->node_boot_start);
for (i = sidx; i < eidx; i++) {
if (unlikely(!test_and_clear_bit(i, bdata->node_bootmem_map)))
@@ -421,7 +432,9 @@ int __init reserve_bootmem(unsigned long addr, unsigned long size,
void __init free_bootmem(unsigned long addr, unsigned long size)
{
- free_bootmem_core(NODE_DATA(0)->bdata, addr, size);
+ bootmem_data_t *bdata;
+ list_for_each_entry(bdata, &bdata_list, list)
+ free_bootmem_core(bdata, addr, size);
}
unsigned long __init free_all_bootmem(void)
diff --git a/mm/filemap.c b/mm/filemap.c
index df343d1e634..07e9d9258b4 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -343,7 +343,7 @@ int sync_page_range(struct inode *inode, struct address_space *mapping,
EXPORT_SYMBOL(sync_page_range);
/**
- * sync_page_range_nolock
+ * sync_page_range_nolock - write & wait on all pages in the passed range without locking
* @inode: target inode
* @mapping: target address_space
* @pos: beginning offset in pages to write
@@ -611,7 +611,10 @@ int __lock_page_killable(struct page *page)
sync_page_killable, TASK_KILLABLE);
}
-/*
+/**
+ * __lock_page_nosync - get a lock on the page, without calling sync_page()
+ * @page: the page to lock
+ *
* Variant of lock_page that does not require the caller to hold a reference
* on the page's mapping.
*/
@@ -1538,9 +1541,20 @@ repeat:
return page;
}
-/*
+/**
+ * read_cache_page_async - read into page cache, fill it if needed
+ * @mapping: the page's address_space
+ * @index: the page index
+ * @filler: function to perform the read
+ * @data: destination for read data
+ *
* Same as read_cache_page, but don't wait for page to become unlocked
* after submitting it to the filler.
+ *
+ * Read into the page cache. If a page already exists, and PageUptodate() is
+ * not set, try to fill the page but don't wait for it to become unlocked.
+ *
+ * If the page does not get brought uptodate, return -EIO.
*/
struct page *read_cache_page_async(struct address_space *mapping,
pgoff_t index,
diff --git a/mm/fremap.c b/mm/fremap.c
index 69a37c2bdf8..07a9c82ce1a 100644
--- a/mm/fremap.c
+++ b/mm/fremap.c
@@ -113,7 +113,7 @@ static int populate_range(struct mm_struct *mm, struct vm_area_struct *vma,
* mmap()/mremap() it does not create any new vmas. The new mappings are
* also safe across swapout.
*
- * NOTE: the 'prot' parameter right now is ignored (but must be zero),
+ * NOTE: the @prot parameter right now is ignored (but must be zero),
* and the vma's default protection is used. Arbitrary protections
* might be implemented in the future.
*/
diff --git a/mm/highmem.c b/mm/highmem.c
index 35d47733cde..7da4a7b6af1 100644
--- a/mm/highmem.c
+++ b/mm/highmem.c
@@ -104,8 +104,9 @@ static void flush_all_zero_pkmaps(void)
flush_tlb_kernel_range(PKMAP_ADDR(0), PKMAP_ADDR(LAST_PKMAP));
}
-/* Flush all unused kmap mappings in order to remove stray
- mappings. */
+/**
+ * kmap_flush_unused - flush all unused kmap mappings in order to remove stray mappings
+ */
void kmap_flush_unused(void)
{
spin_lock(&kmap_lock);
@@ -163,6 +164,14 @@ start:
return vaddr;
}
+/**
+ * kmap_high - map a highmem page into memory
+ * @page: &struct page to map
+ *
+ * Returns the page's virtual memory address.
+ *
+ * We cannot call this from interrupts, as it may block.
+ */
void *kmap_high(struct page *page)
{
unsigned long vaddr;
@@ -170,8 +179,6 @@ void *kmap_high(struct page *page)
/*
* For highmem pages, we can't trust "virtual" until
* after we have the lock.
- *
- * We cannot call this from interrupts, as it may block
*/
spin_lock(&kmap_lock);
vaddr = (unsigned long)page_address(page);
@@ -185,6 +192,10 @@ void *kmap_high(struct page *page)
EXPORT_SYMBOL(kmap_high);
+/**
+ * kunmap_high - map a highmem page into memory
+ * @page: &struct page to unmap
+ */
void kunmap_high(struct page *page)
{
unsigned long vaddr;
@@ -259,6 +270,12 @@ static struct page_address_slot *page_slot(struct page *page)
return &page_address_htable[hash_ptr(page, PA_HASH_ORDER)];
}
+/**
+ * page_address - get the mapped virtual address of a page
+ * @page: &struct page to get the virtual address of
+ *
+ * Returns the page's virtual address.
+ */
void *page_address(struct page *page)
{
unsigned long flags;
@@ -288,6 +305,11 @@ done:
EXPORT_SYMBOL(page_address);
+/**
+ * set_page_address - set a page's virtual address
+ * @page: &struct page to set
+ * @virtual: virtual address to use
+ */
void set_page_address(struct page *page, void *virtual)
{
unsigned long flags;
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 74c1b6b0b37..51c9e2c0164 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -401,12 +401,20 @@ static void return_unused_surplus_pages(unsigned long unused_resv_pages)
struct page *page;
unsigned long nr_pages;
+ /*
+ * We want to release as many surplus pages as possible, spread
+ * evenly across all nodes. Iterate across all nodes until we
+ * can no longer free unreserved surplus pages. This occurs when
+ * the nodes with surplus pages have no free pages.
+ */
+ unsigned long remaining_iterations = num_online_nodes();
+
/* Uncommit the reservation */
resv_huge_pages -= unused_resv_pages;
nr_pages = min(unused_resv_pages, surplus_huge_pages);
- while (nr_pages) {
+ while (remaining_iterations-- && nr_pages) {
nid = next_node(nid, node_online_map);
if (nid == MAX_NUMNODES)
nid = first_node(node_online_map);
@@ -424,6 +432,7 @@ static void return_unused_surplus_pages(unsigned long unused_resv_pages)
surplus_huge_pages--;
surplus_huge_pages_node[nid]--;
nr_pages--;
+ remaining_iterations = num_online_nodes();
}
}
}
@@ -671,9 +680,11 @@ int hugetlb_report_node_meminfo(int nid, char *buf)
{
return sprintf(buf,
"Node %d HugePages_Total: %5u\n"
- "Node %d HugePages_Free: %5u\n",
+ "Node %d HugePages_Free: %5u\n"
+ "Node %d HugePages_Surp: %5u\n",
nid, nr_huge_pages_node[nid],
- nid, free_huge_pages_node[nid]);
+ nid, free_huge_pages_node[nid],
+ nid, surplus_huge_pages_node[nid]);
}
/* Return the number pages of memory we physically have, in PAGE_SIZE units. */
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 8b9f6cae938..9b648bd6345 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -1079,7 +1079,7 @@ static void mem_cgroup_move_task(struct cgroup_subsys *ss,
* Only thread group leaders are allowed to migrate, the mm_struct is
* in effect owned by the leader
*/
- if (p->tgid != p->pid)
+ if (!thread_group_leader(p))
goto out;
css_get(&mem->css);
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index 44b2da11bf4..f255eda693b 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -37,6 +37,7 @@ static DEFINE_SPINLOCK(zone_scan_mutex);
* badness - calculate a numeric value for how bad this task has been
* @p: task struct of which task we should calculate
* @uptime: current uptime in seconds
+ * @mem: target memory controller
*
* The formula used is relatively simple and documented inline in the
* function. The main rationale is that we want to select a good task
@@ -264,6 +265,9 @@ static struct task_struct *select_bad_process(unsigned long *ppoints,
}
/**
+ * dump_tasks - dump current memory state of all system tasks
+ * @mem: target memory controller
+ *
* Dumps the current memory state of all system tasks, excluding kernel threads.
* State information includes task's pid, uid, tgid, vm size, rss, cpu, oom_adj
* score, and name.
@@ -298,7 +302,7 @@ static void dump_tasks(const struct mem_cgroup *mem)
} while_each_thread(g, p);
}
-/**
+/*
* Send SIGKILL to the selected process irrespective of CAP_SYS_RAW_IO
* flag though it's unlikely that we select a process with CAP_SYS_RAW_IO
* set.
@@ -504,6 +508,9 @@ void clear_zonelist_oom(struct zonelist *zonelist)
/**
* out_of_memory - kill the "best" process when we run out of memory
+ * @zonelist: zonelist pointer
+ * @gfp_mask: memory allocation flags
+ * @order: amount of memory being requested as a power of 2
*
* If we run out of memory, we have the choice between either
* killing a random task (bad), letting the system crash (worse)
diff --git a/mm/pagewalk.c b/mm/pagewalk.c
index b4f27d22da9..1cf1417ef8b 100644
--- a/mm/pagewalk.c
+++ b/mm/pagewalk.c
@@ -77,11 +77,11 @@ static int walk_pud_range(pgd_t *pgd, unsigned long addr, unsigned long end,
/**
* walk_page_range - walk a memory map's page tables with a callback
- * @mm - memory map to walk
- * @addr - starting address
- * @end - ending address
- * @walk - set of callbacks to invoke for each level of the tree
- * @private - private data passed to the callback function
+ * @mm: memory map to walk
+ * @addr: starting address
+ * @end: ending address
+ * @walk: set of callbacks to invoke for each level of the tree
+ * @private: private data passed to the callback function
*
* Recursively walk the page table for the memory area in a VMA,
* calling supplied callbacks. Callbacks are called in-order (first
diff --git a/mm/readahead.c b/mm/readahead.c
index c9c50ca1ec3..8762e898897 100644
--- a/mm/readahead.c
+++ b/mm/readahead.c
@@ -443,9 +443,10 @@ EXPORT_SYMBOL_GPL(page_cache_sync_readahead);
* pagecache pages
*
* page_cache_async_ondemand() should be called when a page is used which
- * has the PG_readahead flag: this is a marker to suggest that the application
+ * has the PG_readahead flag; this is a marker to suggest that the application
* has used up enough of the readahead window that we should start pulling in
- * more pages. */
+ * more pages.
+ */
void
page_cache_async_readahead(struct address_space *mapping,
struct file_ra_state *ra, struct file *filp,
diff --git a/mm/rmap.c b/mm/rmap.c
index 0c9a2df06c3..997f06907b6 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -335,6 +335,7 @@ static int page_referenced_anon(struct page *page,
/**
* page_referenced_file - referenced check for object-based rmap
* @page: the page we're checking references on.
+ * @mem_cont: target memory controller
*
* For an object-based mapped page, find all the places it is mapped and
* check/clear the referenced flag. This is done by following the page->mapping
@@ -402,6 +403,7 @@ static int page_referenced_file(struct page *page,
* page_referenced - test if the page was referenced
* @page: the page to test
* @is_locked: caller holds lock on the page
+ * @mem_cont: target memory controller
*
* Quick test_and_clear_referenced for all mappings to a page,
* returns the number of ptes which referenced the page.
@@ -506,7 +508,7 @@ int page_mkclean(struct page *page)
EXPORT_SYMBOL_GPL(page_mkclean);
/**
- * page_set_anon_rmap - setup new anonymous rmap
+ * __page_set_anon_rmap - setup new anonymous rmap
* @page: the page to add the mapping to
* @vma: the vm area in which the mapping is added
* @address: the user virtual address mapped
@@ -530,7 +532,7 @@ static void __page_set_anon_rmap(struct page *page,
}
/**
- * page_set_anon_rmap - sanity check anonymous rmap addition
+ * __page_check_anon_rmap - sanity check anonymous rmap addition
* @page: the page to add the mapping to
* @vma: the vm area in which the mapping is added
* @address: the user virtual address mapped
@@ -583,7 +585,7 @@ void page_add_anon_rmap(struct page *page,
}
}
-/*
+/**
* page_add_new_anon_rmap - add pte mapping to a new anonymous page
* @page: the page to add the mapping to
* @vma: the vm area in which the mapping is added
@@ -623,6 +625,8 @@ void page_add_file_rmap(struct page *page)
/**
* page_dup_rmap - duplicate pte mapping to a page
* @page: the page to add the mapping to
+ * @vma: the vm area being duplicated
+ * @address: the user virtual address mapped
*
* For copy_page_range only: minimal extract from page_add_file_rmap /
* page_add_anon_rmap, avoiding unnecessary tests (already checked) so it's
@@ -642,6 +646,7 @@ void page_dup_rmap(struct page *page, struct vm_area_struct *vma, unsigned long
/**
* page_remove_rmap - take down pte mapping from a page
* @page: page to remove mapping from
+ * @vma: the vm area in which the mapping is removed
*
* The caller needs to hold the pte lock.
*/
@@ -890,6 +895,7 @@ static int try_to_unmap_anon(struct page *page, int migration)
/**
* try_to_unmap_file - unmap file page using the object-based rmap method
* @page: the page to unmap
+ * @migration: migration flag
*
* Find all the mappings of a page using the mapping pointer and the vma chains
* contained in the address_space struct it points to.
@@ -986,6 +992,7 @@ out:
/**
* try_to_unmap - try to remove all page table mappings to a page
* @page: the page to get unmapped
+ * @migration: migration flag
*
* Tries to remove all the page table entries which are mapping this
* page, used in the pageout path. Caller must hold the page lock.
diff --git a/mm/shmem.c b/mm/shmem.c
index 3372bc579e8..f514dd392cd 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -244,9 +244,8 @@ static void shmem_free_inode(struct super_block *sb)
}
}
-/*
+/**
* shmem_recalc_inode - recalculate the size of an inode
- *
* @inode: inode to recalc
*
* We have to calculate the free blocks since the mm can drop
@@ -270,9 +269,8 @@ static void shmem_recalc_inode(struct inode *inode)
}
}
-/*
+/**
* shmem_swp_entry - find the swap vector position in the info structure
- *
* @info: info structure for the inode
* @index: index of the page to find
* @page: optional page to add to the structure. Has to be preset to
@@ -374,13 +372,13 @@ static void shmem_swp_set(struct shmem_inode_info *info, swp_entry_t *entry, uns
}
}
-/*
+/**
* shmem_swp_alloc - get the position of the swap entry for the page.
- * If it does not exist allocate the entry.
- *
* @info: info structure for the inode
* @index: index of the page to find
* @sgp: check and recheck i_size? skip allocation?
+ *
+ * If the entry does not exist, allocate it.
*/
static swp_entry_t *shmem_swp_alloc(struct shmem_inode_info *info, unsigned long index, enum sgp_type sgp)
{
@@ -440,9 +438,8 @@ static swp_entry_t *shmem_swp_alloc(struct shmem_inode_info *info, unsigned long
return entry;
}
-/*
+/**
* shmem_free_swp - free some swap entries in a directory
- *
* @dir: pointer to the directory
* @edir: pointer after last entry of the directory
* @punch_lock: pointer to spinlock when needed for the holepunch case
@@ -2022,7 +2019,7 @@ static const struct inode_operations shmem_symlink_inode_operations = {
};
#ifdef CONFIG_TMPFS_POSIX_ACL
-/**
+/*
* Superblocks without xattr inode operations will get security.* xattr
* support from the VFS "for free". As soon as we have any other xattrs
* like ACLs, we also need to implement the security.* handlers at
@@ -2561,12 +2558,11 @@ out4:
}
module_init(init_tmpfs)
-/*
+/**
* shmem_file_setup - get an unlinked file living in tmpfs
- *
* @name: name for dentry (to be seen in /proc/<pid>/maps
* @size: size to be set for the file
- *
+ * @flags: vm_flags
*/
struct file *shmem_file_setup(char *name, loff_t size, unsigned long flags)
{
@@ -2621,9 +2617,8 @@ put_memory:
return ERR_PTR(error);
}
-/*
+/**
* shmem_zero_setup - setup a shared anonymous mapping
- *
* @vma: the vma to be mmapped is prepared by do_mmap_pgoff
*/
int shmem_zero_setup(struct vm_area_struct *vma)
diff --git a/mm/slab.c b/mm/slab.c
index e6c698f5567..04b308c3bc5 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -1481,7 +1481,7 @@ void __init kmem_cache_init(void)
list_add(&cache_cache.next, &cache_chain);
cache_cache.colour_off = cache_line_size();
cache_cache.array[smp_processor_id()] = &initarray_cache.cache;
- cache_cache.nodelists[node] = &initkmem_list3[CACHE_CACHE];
+ cache_cache.nodelists[node] = &initkmem_list3[CACHE_CACHE + node];
/*
* struct kmem_cache size depends on nr_node_ids, which
@@ -1602,7 +1602,7 @@ void __init kmem_cache_init(void)
int nid;
for_each_online_node(nid) {
- init_list(&cache_cache, &initkmem_list3[CACHE_CACHE], nid);
+ init_list(&cache_cache, &initkmem_list3[CACHE_CACHE + nid], nid);
init_list(malloc_sizes[INDEX_AC].cs_cachep,
&initkmem_list3[SIZE_AC + nid], nid);
@@ -3624,12 +3624,11 @@ void *kmem_cache_alloc(struct kmem_cache *cachep, gfp_t flags)
EXPORT_SYMBOL(kmem_cache_alloc);
/**
- * kmem_ptr_validate - check if an untrusted pointer might
- * be a slab entry.
+ * kmem_ptr_validate - check if an untrusted pointer might be a slab entry.
* @cachep: the cache we're checking against
* @ptr: pointer to validate
*
- * This verifies that the untrusted pointer looks sane:
+ * This verifies that the untrusted pointer looks sane;
* it is _not_ a guarantee that the pointer is actually
* part of the slab cache in question, but it at least
* validates that the pointer can be dereferenced and
diff --git a/mm/slub.c b/mm/slub.c
index 96d63eb3ab1..acc975fcc8c 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -1470,6 +1470,9 @@ static void *__slab_alloc(struct kmem_cache *s,
void **object;
struct page *new;
+ /* We handle __GFP_ZERO in the caller */
+ gfpflags &= ~__GFP_ZERO;
+
if (!c->page)
goto new_slab;
@@ -1536,9 +1539,15 @@ new_slab:
* That is only possible if certain conditions are met that are being
* checked when a slab is created.
*/
- if (!(gfpflags & __GFP_NORETRY) && (s->flags & __PAGE_ALLOC_FALLBACK))
- return kmalloc_large(s->objsize, gfpflags);
-
+ if (!(gfpflags & __GFP_NORETRY) &&
+ (s->flags & __PAGE_ALLOC_FALLBACK)) {
+ if (gfpflags & __GFP_WAIT)
+ local_irq_enable();
+ object = kmalloc_large(s->objsize, gfpflags);
+ if (gfpflags & __GFP_WAIT)
+ local_irq_disable();
+ return object;
+ }
return NULL;
debug:
if (!alloc_debug_processing(s, c->page, object, addr))
@@ -2679,6 +2688,7 @@ void kfree(const void *x)
}
EXPORT_SYMBOL(kfree);
+#if defined(CONFIG_SLUB_DEBUG) || defined(CONFIG_SLABINFO)
static unsigned long count_partial(struct kmem_cache_node *n)
{
unsigned long flags;
@@ -2691,6 +2701,7 @@ static unsigned long count_partial(struct kmem_cache_node *n)
spin_unlock_irqrestore(&n->list_lock, flags);
return x;
}
+#endif
/*
* kmem_cache_shrink removes empty slabs from the partial lists and sorts
diff --git a/mm/sparse-vmemmap.c b/mm/sparse-vmemmap.c
index cd75b21dd4c..99c4f36eb8a 100644
--- a/mm/sparse-vmemmap.c
+++ b/mm/sparse-vmemmap.c
@@ -76,7 +76,7 @@ pte_t * __meminit vmemmap_pte_populate(pmd_t *pmd, unsigned long addr, int node)
pte_t entry;
void *p = vmemmap_alloc_block(PAGE_SIZE, node);
if (!p)
- return 0;
+ return NULL;
entry = pfn_pte(__pa(p) >> PAGE_SHIFT, PAGE_KERNEL);
set_pte_at(&init_mm, addr, pte, entry);
}
@@ -89,7 +89,7 @@ pmd_t * __meminit vmemmap_pmd_populate(pud_t *pud, unsigned long addr, int node)
if (pmd_none(*pmd)) {
void *p = vmemmap_alloc_block(PAGE_SIZE, node);
if (!p)
- return 0;
+ return NULL;
pmd_populate_kernel(&init_mm, pmd, p);
}
return pmd;
@@ -101,7 +101,7 @@ pud_t * __meminit vmemmap_pud_populate(pgd_t *pgd, unsigned long addr, int node)
if (pud_none(*pud)) {
void *p = vmemmap_alloc_block(PAGE_SIZE, node);
if (!p)
- return 0;
+ return NULL;
pud_populate(&init_mm, pud, p);
}
return pud;
@@ -113,7 +113,7 @@ pgd_t * __meminit vmemmap_pgd_populate(unsigned long addr, int node)
if (pgd_none(*pgd)) {
void *p = vmemmap_alloc_block(PAGE_SIZE, node);
if (!p)
- return 0;
+ return NULL;
pgd_populate(&init_mm, pgd, p);
}
return pgd;
diff --git a/mm/swap.c b/mm/swap.c
index d4ec59aa5c4..aa1139ccf3a 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -78,12 +78,11 @@ void put_page(struct page *page)
EXPORT_SYMBOL(put_page);
/**
- * put_pages_list(): release a list of pages
+ * put_pages_list() - release a list of pages
+ * @pages: list of pages threaded on page->lru
*
* Release a list of pages which are strung together on page.lru. Currently
* used by read_cache_pages() and related error recovery code.
- *
- * @pages: list of pages threaded on page->lru
*/
void put_pages_list(struct list_head *pages)
{
diff --git a/mm/swap_state.c b/mm/swap_state.c
index ec42f01a8d0..50757ee3f9f 100644
--- a/mm/swap_state.c
+++ b/mm/swap_state.c
@@ -115,6 +115,7 @@ void __delete_from_swap_cache(struct page *page)
/**
* add_to_swap - allocate swap space for a page
* @page: page we want to move to swap
+ * @gfp_mask: memory allocation flags
*
* Allocate swap space for the page and add the page to the
* swap cache. Caller needs to hold the page lock.
@@ -315,6 +316,7 @@ struct page *read_swap_cache_async(swp_entry_t entry, gfp_t gfp_mask,
/**
* swapin_readahead - swap in pages in hope we need them soon
* @entry: swap entry of this memory
+ * @gfp_mask: memory allocation flags
* @vma: user vma this address belongs to
* @addr: target address for mempolicy
*
diff --git a/mm/tiny-shmem.c b/mm/tiny-shmem.c
index 702083638c1..ae532f50194 100644
--- a/mm/tiny-shmem.c
+++ b/mm/tiny-shmem.c
@@ -39,12 +39,11 @@ static int __init init_tmpfs(void)
}
module_init(init_tmpfs)
-/*
+/**
* shmem_file_setup - get an unlinked file living in tmpfs
- *
* @name: name for dentry (to be seen in /proc/<pid>/maps
* @size: size to be set for the file
- *
+ * @flags: vm_flags
*/
struct file *shmem_file_setup(char *name, loff_t size, unsigned long flags)
{
@@ -89,15 +88,16 @@ struct file *shmem_file_setup(char *name, loff_t size, unsigned long flags)
close_file:
put_filp(file);
+ return ERR_PTR(error);
+
put_dentry:
dput(dentry);
put_memory:
return ERR_PTR(error);
}
-/*
+/**
* shmem_zero_setup - setup a shared anonymous mapping
- *
* @vma: the vma to be mmapped is prepared by do_mmap_pgoff
*/
int shmem_zero_setup(struct vm_area_struct *vma)
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 950c0be9ca8..ecf91f8034b 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -757,7 +757,8 @@ finished:
* @vma: vma to cover (map full range of vma)
* @addr: vmalloc memory
* @pgoff: number of pages into addr before first page to map
- * @returns: 0 for success, -Exxx on failure
+ *
+ * Returns: 0 for success, -Exxx on failure
*
* This function checks that addr is a valid vmalloc'ed area, and
* that it is big enough to cover the vma. Will return failure if
@@ -829,7 +830,8 @@ static int f(pte_t *pte, pgtable_t table, unsigned long addr, void *data)
/**
* alloc_vm_area - allocate a range of kernel address space
* @size: size of the area
- * @returns: NULL on failure, vm_struct on success
+ *
+ * Returns: NULL on failure, vm_struct on success
*
* This function reserves a range of kernel address space, and
* allocates pagetables to map that range. No actual mappings
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 45711585684..4046434046e 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -70,13 +70,6 @@ struct scan_control {
int order;
- /*
- * Pages that have (or should have) IO pending. If we run into
- * a lot of these, we're better off waiting a little for IO to
- * finish rather than scanning more pages in the VM.
- */
- int nr_io_pages;
-
/* Which cgroup do we reclaim from */
struct mem_cgroup *mem_cgroup;
@@ -512,10 +505,8 @@ static unsigned long shrink_page_list(struct list_head *page_list,
*/
if (sync_writeback == PAGEOUT_IO_SYNC && may_enter_fs)
wait_on_page_writeback(page);
- else {
- sc->nr_io_pages++;
+ else
goto keep_locked;
- }
}
referenced = page_referenced(page, 1, sc->mem_cgroup);
@@ -554,10 +545,8 @@ static unsigned long shrink_page_list(struct list_head *page_list,
if (PageDirty(page)) {
if (sc->order <= PAGE_ALLOC_COSTLY_ORDER && referenced)
goto keep_locked;
- if (!may_enter_fs) {
- sc->nr_io_pages++;
+ if (!may_enter_fs)
goto keep_locked;
- }
if (!sc->may_writepage)
goto keep_locked;
@@ -568,10 +557,8 @@ static unsigned long shrink_page_list(struct list_head *page_list,
case PAGE_ACTIVATE:
goto activate_locked;
case PAGE_SUCCESS:
- if (PageWriteback(page) || PageDirty(page)) {
- sc->nr_io_pages++;
+ if (PageWriteback(page) || PageDirty(page))
goto keep;
- }
/*
* A synchronous write - probably a ramdisk. Go
* ahead and try to reclaim the page.
@@ -1344,7 +1331,6 @@ static unsigned long do_try_to_free_pages(struct zone **zones, gfp_t gfp_mask,
for (priority = DEF_PRIORITY; priority >= 0; priority--) {
sc->nr_scanned = 0;
- sc->nr_io_pages = 0;
if (!priority)
disable_swap_token();
nr_reclaimed += shrink_zones(priority, zones, sc);
@@ -1379,8 +1365,7 @@ static unsigned long do_try_to_free_pages(struct zone **zones, gfp_t gfp_mask,
}
/* Take a nap, wait for some writeback to complete */
- if (sc->nr_scanned && priority < DEF_PRIORITY - 2 &&
- sc->nr_io_pages > sc->swap_cluster_max)
+ if (sc->nr_scanned && priority < DEF_PRIORITY - 2)
congestion_wait(WRITE, HZ/10);
}
/* top priority shrink_caches still had more to do? don't OOM, then */
@@ -1514,7 +1499,6 @@ loop_again:
if (!priority)
disable_swap_token();
- sc.nr_io_pages = 0;
all_zones_ok = 1;
/*
@@ -1607,8 +1591,7 @@ loop_again:
* OK, kswapd is getting into trouble. Take a nap, then take
* another pass across the zones.
*/
- if (total_scanned && priority < DEF_PRIORITY - 2 &&
- sc.nr_io_pages > sc.swap_cluster_max)
+ if (total_scanned && priority < DEF_PRIORITY - 2)
congestion_wait(WRITE, HZ/10);
/*
diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c
index 4e8d4e724b9..f624dff7685 100644
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -1520,7 +1520,7 @@ static int __init p9_trans_fd_init(void)
v9fs_register_trans(&p9_unix_trans);
v9fs_register_trans(&p9_fd_trans);
- return 1;
+ return 0;
}
module_init(p9_trans_fd_init);
diff --git a/net/core/sock.c b/net/core/sock.c
index 83e11f7260f..f2ccb1620dc 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -1642,7 +1642,7 @@ static void sock_def_readable(struct sock *sk, int len)
{
read_lock(&sk->sk_callback_lock);
if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
- wake_up_interruptible(sk->sk_sleep);
+ wake_up_interruptible_sync(sk->sk_sleep);
sk_wake_async(sk, SOCK_WAKE_WAITD, POLL_IN);
read_unlock(&sk->sk_callback_lock);
}
@@ -1656,7 +1656,7 @@ static void sock_def_write_space(struct sock *sk)
*/
if ((atomic_read(&sk->sk_wmem_alloc) << 1) <= sk->sk_sndbuf) {
if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
- wake_up_interruptible(sk->sk_sleep);
+ wake_up_interruptible_sync(sk->sk_sleep);
/* Should agree with poll, otherwise some programs break */
if (sock_writeable(sk))
diff --git a/net/rxrpc/ar-internal.h b/net/rxrpc/ar-internal.h
index e58cc65728b..c89b797b221 100644
--- a/net/rxrpc/ar-internal.h
+++ b/net/rxrpc/ar-internal.h
@@ -23,7 +23,7 @@
struct rxrpc_crypt {
union {
u8 x[FCRYPT_BSIZE];
- u32 n[2];
+ __be32 n[2];
};
} __attribute__((aligned(8)));
diff --git a/net/rxrpc/rxkad.c b/net/rxrpc/rxkad.c
index f48434adb7c..d1c296f2d61 100644
--- a/net/rxrpc/rxkad.c
+++ b/net/rxrpc/rxkad.c
@@ -261,6 +261,7 @@ static int rxkad_secure_packet(const struct rxrpc_call *call,
__be32 x[2];
} tmpbuf __attribute__((aligned(8))); /* must all be in same page */
__be32 x;
+ u32 y;
int ret;
sp = rxrpc_skb(skb);
@@ -292,11 +293,11 @@ static int rxkad_secure_packet(const struct rxrpc_call *call,
sg_init_one(&sg[1], &tmpbuf, sizeof(tmpbuf));
crypto_blkcipher_encrypt_iv(&desc, &sg[0], &sg[1], sizeof(tmpbuf));
- x = ntohl(tmpbuf.x[1]);
- x = (x >> 16) & 0xffff;
- if (x == 0)
- x = 1; /* zero checksums are not permitted */
- sp->hdr.cksum = htons(x);
+ y = ntohl(tmpbuf.x[1]);
+ y = (y >> 16) & 0xffff;
+ if (y == 0)
+ y = 1; /* zero checksums are not permitted */
+ sp->hdr.cksum = htons(y);
switch (call->conn->security_level) {
case RXRPC_SECURITY_PLAIN:
@@ -314,7 +315,7 @@ static int rxkad_secure_packet(const struct rxrpc_call *call,
break;
}
- _leave(" = %d [set %hx]", ret, x);
+ _leave(" = %d [set %hx]", ret, y);
return ret;
}
@@ -492,6 +493,7 @@ static int rxkad_verify_packet(const struct rxrpc_call *call,
__be32 x[2];
} tmpbuf __attribute__((aligned(8))); /* must all be in same page */
__be32 x;
+ u16 y;
__be16 cksum;
int ret;
@@ -526,12 +528,12 @@ static int rxkad_verify_packet(const struct rxrpc_call *call,
sg_init_one(&sg[1], &tmpbuf, sizeof(tmpbuf));
crypto_blkcipher_encrypt_iv(&desc, &sg[0], &sg[1], sizeof(tmpbuf));
- x = ntohl(tmpbuf.x[1]);
- x = (x >> 16) & 0xffff;
- if (x == 0)
- x = 1; /* zero checksums are not permitted */
+ y = ntohl(tmpbuf.x[1]);
+ y = (y >> 16) & 0xffff;
+ if (y == 0)
+ y = 1; /* zero checksums are not permitted */
- cksum = htons(x);
+ cksum = htons(y);
if (sp->hdr.cksum != cksum) {
*_abort_code = RXKADSEALEDINCON;
_leave(" = -EPROTO [csum failed]");
@@ -1001,7 +1003,8 @@ static int rxkad_verify_response(struct rxrpc_connection *conn,
struct rxrpc_crypt session_key;
time_t expiry;
void *ticket;
- u32 abort_code, version, kvno, ticket_len, csum, level;
+ u32 abort_code, version, kvno, ticket_len, level;
+ __be32 csum;
int ret;
_enter("{%d,%x}", conn->debug_id, key_serial(conn->server_key));
diff --git a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
index ab54a736486..c22d6b6f2db 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
@@ -237,14 +237,12 @@ static void rdma_set_ctxt_sge(struct svc_rdma_op_ctxt *ctxt,
static int rdma_read_max_sge(struct svcxprt_rdma *xprt, int sge_count)
{
-#ifdef RDMA_TRANSPORT_IWARP
if ((RDMA_TRANSPORT_IWARP ==
rdma_node_get_transport(xprt->sc_cm_id->
device->node_type))
&& sge_count > 1)
return 1;
else
-#endif
return min_t(int, sge_count, xprt->sc_max_sge);
}
@@ -324,15 +322,6 @@ next_sge:
ctxt->direction = DMA_FROM_DEVICE;
clear_bit(RDMACTXT_F_READ_DONE, &ctxt->flags);
clear_bit(RDMACTXT_F_LAST_CTXT, &ctxt->flags);
- if ((ch+1)->rc_discrim == 0) {
- /*
- * Checked in sq_cq_reap to see if we need to
- * be enqueued
- */
- set_bit(RDMACTXT_F_LAST_CTXT, &ctxt->flags);
- ctxt->next = hdr_ctxt;
- hdr_ctxt->next = head;
- }
/* Prepare READ WR */
memset(&read_wr, 0, sizeof read_wr);
@@ -350,7 +339,17 @@ next_sge:
rdma_set_ctxt_sge(ctxt, &sge[ch_sge_ary[ch_no].start],
&sgl_offset,
read_wr.num_sge);
-
+ if (((ch+1)->rc_discrim == 0) &&
+ (read_wr.num_sge == ch_sge_ary[ch_no].count)) {
+ /*
+ * Mark the last RDMA_READ with a bit to
+ * indicate all RPC data has been fetched from
+ * the client and the RPC needs to be enqueued.
+ */
+ set_bit(RDMACTXT_F_LAST_CTXT, &ctxt->flags);
+ ctxt->next = hdr_ctxt;
+ hdr_ctxt->next = head;
+ }
/* Post the read */
err = svc_rdma_send(xprt, &read_wr);
if (err) {
diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost
index cfc004e0441..2d20640854b 100644
--- a/scripts/Makefile.modpost
+++ b/scripts/Makefile.modpost
@@ -58,6 +58,9 @@ modules := $(patsubst %.o,%.ko, $(wildcard $(__modules:.ko=.o)))
# Stop after building .o files if NOFINAL is set. Makes compile tests quicker
_modpost: $(if $(KBUILD_MODPOST_NOFINAL), $(modules:.ko:.o),$(modules))
+ifneq ($(KBUILD_BUILDHOST),$(ARCH))
+ cross_build := 1
+endif
# Step 2), invoke modpost
# Includes step 3,4
@@ -70,7 +73,8 @@ modpost = scripts/mod/modpost \
$(if $(CONFIG_DEBUG_SECTION_MISMATCH),,-S) \
$(if $(CONFIG_MARKERS),-K $(kernelmarkersfile)) \
$(if $(CONFIG_MARKERS),-M $(markersfile)) \
- $(if $(KBUILD_EXTMOD)$(KBUILD_MODPOST_WARN),-w)
+ $(if $(KBUILD_EXTMOD)$(KBUILD_MODPOST_WARN),-w) \
+ $(if $(cross_build),-c)
quiet_cmd_modpost = MODPOST $(words $(filter-out vmlinux FORCE, $^)) modules
cmd_modpost = $(modpost) -s
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 2a7cef9726e..58a94947d65 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -9,7 +9,7 @@ use strict;
my $P = $0;
$P =~ s@.*/@@g;
-my $V = '0.15';
+my $V = '0.16';
use Getopt::Long qw(:config no_auto_abbrev);
@@ -18,6 +18,7 @@ my $tree = 1;
my $chk_signoff = 1;
my $chk_patch = 1;
my $tst_type = 0;
+my $tst_only;
my $emacs = 0;
my $terse = 0;
my $file = 0;
@@ -44,6 +45,7 @@ GetOptions(
'debug=s' => \%debug,
'test-type!' => \$tst_type,
+ 'test-only=s' => \$tst_only,
) or exit;
my $exit = 0;
@@ -263,17 +265,7 @@ sub expand_tabs {
return $res;
}
sub copy_spacing {
- my ($str) = @_;
-
- my $res = '';
- for my $c (split(//, $str)) {
- if ($c eq "\t") {
- $res .= $c;
- } else {
- $res .= ' ';
- }
- }
-
+ (my $res = shift) =~ tr/\t/ /c;
return $res;
}
@@ -290,53 +282,76 @@ sub line_stats {
return (length($line), length($white));
}
+my $sanitise_quote = '';
+
+sub sanitise_line_reset {
+ my ($in_comment) = @_;
+
+ if ($in_comment) {
+ $sanitise_quote = '*/';
+ } else {
+ $sanitise_quote = '';
+ }
+}
sub sanitise_line {
my ($line) = @_;
my $res = '';
my $l = '';
- my $quote = '';
my $qlen = 0;
+ my $off = 0;
+ my $c;
- foreach my $c (split(//, $line)) {
- # The second backslash of a pair is not a "quote".
- if ($l eq "\\" && $c eq "\\") {
- $c = 'X';
- }
- if ($l ne "\\" && ($c eq "'" || $c eq '"')) {
- if ($quote eq '') {
- $quote = $c;
- $res .= $c;
- $l = $c;
- $qlen = 0;
- next;
- } elsif ($quote eq $c) {
- $quote = '';
- }
+ # Always copy over the diff marker.
+ $res = substr($line, 0, 1);
+
+ for ($off = 1; $off < length($line); $off++) {
+ $c = substr($line, $off, 1);
+
+ # Comments we are wacking completly including the begin
+ # and end, all to $;.
+ if ($sanitise_quote eq '' && substr($line, $off, 2) eq '/*') {
+ $sanitise_quote = '*/';
+
+ substr($res, $off, 2, "$;$;");
+ $off++;
+ next;
}
- if ($quote eq "'" && $qlen > 1) {
- $quote = '';
+ if (substr($line, $off, 2) eq $sanitise_quote) {
+ $sanitise_quote = '';
+ substr($res, $off, 2, "$;$;");
+ $off++;
+ next;
}
- if ($quote && $c ne "\t") {
- $res .= "X";
- $qlen++;
- } else {
- $res .= $c;
+
+ # A \ in a string means ignore the next character.
+ if (($sanitise_quote eq "'" || $sanitise_quote eq '"') &&
+ $c eq "\\") {
+ substr($res, $off, 2, 'XX');
+ $off++;
+ next;
}
+ # Regular quotes.
+ if ($c eq "'" || $c eq '"') {
+ if ($sanitise_quote eq '') {
+ $sanitise_quote = $c;
- $l = $c;
- }
+ substr($res, $off, 1, $c);
+ next;
+ } elsif ($sanitise_quote eq $c) {
+ $sanitise_quote = '';
+ }
+ }
- # Clear out the comments.
- while ($res =~ m@(/\*.*?\*/)@g) {
- substr($res, $-[1], $+[1] - $-[1]) = $; x ($+[1] - $-[1]);
- }
- if ($res =~ m@(/\*.*)@) {
- substr($res, $-[1], $+[1] - $-[1]) = $; x ($+[1] - $-[1]);
- }
- if ($res =~ m@^.(.*\*/)@) {
- substr($res, $-[1], $+[1] - $-[1]) = $; x ($+[1] - $-[1]);
+ #print "SQ:$sanitise_quote\n";
+ if ($off != 0 && $sanitise_quote eq '*/' && $c ne "\t") {
+ substr($res, $off, 1, $;);
+ } elsif ($off != 0 && $sanitise_quote && $c ne "\t") {
+ substr($res, $off, 1, 'X');
+ } else {
+ substr($res, $off, 1, $c);
+ }
}
# The pathname on a #include may be surrounded by '<' and '>'.
@@ -359,6 +374,7 @@ sub ctx_statement_block {
my $blk = '';
my $soff = $off;
my $coff = $off - 1;
+ my $coff_set = 0;
my $loff = 0;
@@ -370,7 +386,7 @@ sub ctx_statement_block {
my $remainder;
while (1) {
- #warn "CSB: blk<$blk>\n";
+ #warn "CSB: blk<$blk> remain<$remain>\n";
# If we are about to drop off the end, pull in more
# context.
if ($off >= $len) {
@@ -393,7 +409,7 @@ sub ctx_statement_block {
$c = substr($blk, $off, 1);
$remainder = substr($blk, $off);
- #warn "CSB: c<$c> type<$type> level<$level>\n";
+ #warn "CSB: c<$c> type<$type> level<$level> remainder<$remainder> coff_set<$coff_set>\n";
# Statement ends at the ';' or a close '}' at the
# outermost level.
if ($level == 0 && $c eq ';') {
@@ -401,10 +417,14 @@ sub ctx_statement_block {
}
# An else is really a conditional as long as its not else if
- if ($level == 0 && (!defined($p) || $p =~ /(?:\s|\})/) &&
- $remainder =~ /(else)(?:\s|{)/ &&
- $remainder !~ /else\s+if\b/) {
- $coff = $off + length($1);
+ if ($level == 0 && $coff_set == 0 &&
+ (!defined($p) || $p =~ /(?:\s|\}|\+)/) &&
+ $remainder =~ /^(else)(?:\s|{)/ &&
+ $remainder !~ /^else\s+if\b/) {
+ $coff = $off + length($1) - 1;
+ $coff_set = 1;
+ #warn "CSB: mark coff<$coff> soff<$soff> 1<$1>\n";
+ #warn "[" . substr($blk, $soff, $coff - $soff + 1) . "]\n";
}
if (($type eq '' || $type eq '(') && $c eq '(') {
@@ -417,6 +437,8 @@ sub ctx_statement_block {
if ($level == 0 && $coff < $soff) {
$coff = $off;
+ $coff_set = 1;
+ #warn "CSB: mark coff<$coff>\n";
}
}
if (($type eq '' || $type eq '{') && $c eq '{') {
@@ -444,7 +466,7 @@ sub ctx_statement_block {
#warn "STATEMENT<$statement>\n";
#warn "CONDITION<$condition>\n";
- #print "off<$off> loff<$loff>\n";
+ #print "coff<$coff> soff<$off> loff<$loff>\n";
return ($statement, $condition,
$line, $remain + 1, $off - $loff + 1, $level);
@@ -502,7 +524,7 @@ sub ctx_statement_full {
# Grab the first conditional/block pair.
($statement, $condition, $linenr, $remain, $off, $level) =
ctx_statement_block($linenr, $remain, $off);
- #print "F: c<$condition> s<$statement>\n";
+ #print "F: c<$condition> s<$statement> remain<$remain>\n";
push(@chunks, [ $condition, $statement ]);
if (!($remain > 0 && $condition =~ /^\s*(?:\n[+-])?\s*(?:if|else|do)\b/s)) {
return ($level, $linenr, @chunks);
@@ -514,7 +536,7 @@ sub ctx_statement_full {
($statement, $condition, $linenr, $remain, $off, $level) =
ctx_statement_block($linenr, $remain, $off);
#print "C: c<$condition> s<$statement> remain<$remain>\n";
- last if (!($remain > 0 && $condition =~ /^\s*(?:\n[+-])?\s*(?:else|do)\b/s));
+ last if (!($remain > 0 && $condition =~ /^(?:\s*\n[+-])*\s*(?:else|do)\b/s));
#print "C: push\n";
push(@chunks, [ $condition, $statement ]);
}
@@ -668,6 +690,7 @@ sub annotate_values {
print "$stream\n" if ($dbg_values > 1);
while (length($cur)) {
+ @av_paren_type = ('E') if ($#av_paren_type < 0);
print " <" . join('', @av_paren_type) .
"> <$type> " if ($dbg_values > 1);
if ($cur =~ /^(\s+)/o) {
@@ -804,28 +827,34 @@ sub possible {
my $prefix = '';
sub report {
+ if (defined $tst_only && $_[0] !~ /\Q$tst_only\E/) {
+ return 0;
+ }
my $line = $prefix . $_[0];
$line = (split('\n', $line))[0] . "\n" if ($terse);
push(our @report, $line);
+
+ return 1;
}
sub report_dump {
our @report;
}
sub ERROR {
- report("ERROR: $_[0]\n");
- our $clean = 0;
- our $cnt_error++;
+ if (report("ERROR: $_[0]\n")) {
+ our $clean = 0;
+ our $cnt_error++;
+ }
}
sub WARN {
- report("WARNING: $_[0]\n");
- our $clean = 0;
- our $cnt_warn++;
+ if (report("WARNING: $_[0]\n")) {
+ our $clean = 0;
+ our $cnt_warn++;
+ }
}
sub CHK {
- if ($check) {
- report("CHECK: $_[0]\n");
+ if ($check && report("CHECK: $_[0]\n")) {
our $clean = 0;
our $cnt_chk++;
}
@@ -867,30 +896,76 @@ sub process {
my $prev_values = 'E';
# suppression flags
- my $suppress_ifbraces = 0;
+ my %suppress_ifbraces;
# Pre-scan the patch sanitizing the lines.
# Pre-scan the patch looking for any __setup documentation.
#
my @setup_docs = ();
my $setup_docs = 0;
+
+ sanitise_line_reset();
my $line;
foreach my $rawline (@rawlines) {
- # Standardise the strings and chars within the input to
- # simplify matching.
- $line = sanitise_line($rawline);
- push(@lines, $line);
-
- ##print "==>$rawline\n";
- ##print "-->$line\n";
+ $linenr++;
+ $line = $rawline;
- if ($line=~/^\+\+\+\s+(\S+)/) {
+ if ($rawline=~/^\+\+\+\s+(\S+)/) {
$setup_docs = 0;
if ($1 =~ m@Documentation/kernel-parameters.txt$@) {
$setup_docs = 1;
}
- next;
+ #next;
+ }
+ if ($rawline=~/^\@\@ -\d+(?:,\d+)? \+(\d+)(,(\d+))? \@\@/) {
+ $realline=$1-1;
+ if (defined $2) {
+ $realcnt=$3+1;
+ } else {
+ $realcnt=1+1;
+ }
+
+ # Guestimate if this is a continuing comment. Run
+ # the context looking for a comment "edge". If this
+ # edge is a close comment then we must be in a comment
+ # at context start.
+ my $edge;
+ for (my $ln = $linenr; $ln < ($linenr + $realcnt); $ln++) {
+ next if ($line =~ /^-/);
+ ($edge) = ($rawlines[$ln - 1] =~ m@(/\*|\*/)@);
+ last if (defined $edge);
+ }
+ if (defined $edge && $edge eq '*/') {
+ $in_comment = 1;
+ }
+
+ # Guestimate if this is a continuing comment. If this
+ # is the start of a diff block and this line starts
+ # ' *' then it is very likely a comment.
+ if (!defined $edge &&
+ $rawlines[$linenr] =~ m@^.\s* \*(?:\s|$)@)
+ {
+ $in_comment = 1;
+ }
+
+ ##print "COMMENT:$in_comment edge<$edge> $rawline\n";
+ sanitise_line_reset($in_comment);
+
+ } elsif ($realcnt) {
+ # Standardise the strings and chars within the input to
+ # simplify matching.
+ $line = sanitise_line($rawline);
}
+ push(@lines, $line);
+
+ if ($realcnt > 1) {
+ $realcnt-- if ($line =~ /^(?:\+| |$)/);
+ } else {
+ $realcnt = 0;
+ }
+
+ #print "==>$rawline\n";
+ #print "-->$line\n";
if ($setup_docs && $line =~ /^\+/) {
push(@setup_docs, $line);
@@ -899,23 +974,17 @@ sub process {
$prefix = '';
+ $realcnt = 0;
+ $linenr = 0;
foreach my $line (@lines) {
$linenr++;
my $rawline = $rawlines[$linenr - 1];
-#extract the filename as it passes
- if ($line=~/^\+\+\+\s+(\S+)/) {
- $realfile=$1;
- $realfile =~ s@^[^/]*/@@;
- $in_comment = 0;
- next;
- }
#extract the line range in the file after the patch is applied
if ($line=~/^\@\@ -\d+(?:,\d+)? \+(\d+)(,(\d+))? \@\@/) {
$is_patch = 1;
$first_line = $linenr + 1;
- $in_comment = 0;
$realline=$1-1;
if (defined $2) {
$realcnt=$3+1;
@@ -925,50 +994,16 @@ sub process {
annotate_reset();
$prev_values = 'E';
- $suppress_ifbraces = $linenr - 1;
+ %suppress_ifbraces = ();
next;
- }
# track the line number as we move through the hunk, note that
# new versions of GNU diff omit the leading space on completely
# blank context lines so we need to count that too.
- if ($line =~ /^( |\+|$)/) {
+ } elsif ($line =~ /^( |\+|$)/) {
$realline++;
$realcnt-- if ($realcnt != 0);
- # Guestimate if this is a continuing comment. Run
- # the context looking for a comment "edge". If this
- # edge is a close comment then we must be in a comment
- # at context start.
- if ($linenr == $first_line) {
- my $edge;
- for (my $ln = $first_line; $ln < ($linenr + $realcnt); $ln++) {
- ($edge) = ($rawlines[$ln - 1] =~ m@(/\*|\*/)@);
- last if (defined $edge);
- }
- if (defined $edge && $edge eq '*/') {
- $in_comment = 1;
- }
- }
-
- # Guestimate if this is a continuing comment. If this
- # is the start of a diff block and this line starts
- # ' *' then it is very likely a comment.
- if ($linenr == $first_line and $rawline =~ m@^.\s* \*(?:\s|$)@) {
- $in_comment = 1;
- }
-
- # Find the last comment edge on _this_ line.
- $comment_edge = 0;
- while (($rawline =~ m@(/\*|\*/)@g)) {
- if ($1 eq '/*') {
- $in_comment = 1;
- } else {
- $in_comment = 0;
- }
- $comment_edge = 1;
- }
-
# Measure the line length and indent.
($length, $indent) = line_stats($rawline);
@@ -977,23 +1012,36 @@ sub process {
($previndent, $stashindent) = ($stashindent, $indent);
($prevrawline, $stashrawline) = ($stashrawline, $rawline);
- #warn "ic<$in_comment> ce<$comment_edge> line<$line>\n";
+ #warn "line<$line>\n";
} elsif ($realcnt == 1) {
$realcnt--;
}
#make up the handle for any error we report on this line
+ $prefix = "$filename:$realline: " if ($emacs && $file);
+ $prefix = "$filename:$linenr: " if ($emacs && !$file);
+
$here = "#$linenr: " if (!$file);
$here = "#$realline: " if ($file);
+
+ # extract the filename as it passes
+ if ($line=~/^\+\+\+\s+(\S+)/) {
+ $realfile = $1;
+ $realfile =~ s@^[^/]*/@@;
+
+ if ($realfile =~ m@include/asm/@) {
+ ERROR("do not modify files in include/asm, change architecture specific files in include/asm-<architecture>\n" . "$here$rawline\n");
+ }
+ next;
+ }
+
$here .= "FILE: $realfile:$realline:" if ($realcnt != 0);
my $hereline = "$here\n$rawline\n";
my $herecurr = "$here\n$rawline\n";
my $hereprev = "$here\n$prevrawline\n$rawline\n";
- $prefix = "$filename:$realline: " if ($emacs && $file);
- $prefix = "$filename:$linenr: " if ($emacs && !$file);
$cnt_lines++ if ($realcnt != 0);
#check the patch for a signoff:
@@ -1005,7 +1053,7 @@ sub process {
$herecurr);
}
if ($line =~ /^\s*signed-off-by:\S/i) {
- WARN("need space after Signed-off-by:\n" .
+ WARN("space required after Signed-off-by:\n" .
$herecurr);
}
}
@@ -1072,11 +1120,6 @@ sub process {
WARN("CVS style keyword markers, these will _not_ be updated\n". $herecurr);
}
-# The rest of our checks refer specifically to C style
-# only apply those _outside_ comments. Only skip
-# lines in the middle of comments.
- next if (!$comment_edge && $in_comment);
-
# Check for potential 'bare' types
if ($realcnt) {
my ($s, $c) = ctx_statement_block($linenr, $realcnt, 0);
@@ -1110,7 +1153,7 @@ sub process {
my ($name_len) = length($1);
my $ctx = $s;
- substr($ctx, 0, $name_len + 1) = '';
+ substr($ctx, 0, $name_len + 1, '');
$ctx =~ s/\)[^\)]*$//;
for my $arg (split(/\s*,\s*/, $ctx)) {
@@ -1151,27 +1194,33 @@ sub process {
# if/while/etc brace do not go on next line, unless defining a do while loop,
# or if that brace on the next line is for something else
- if ($line =~ /\b(?:(if|while|for|switch)\s*\(|do\b|else\b)/ && $line !~ /^.#/) {
+ if ($line =~ /(.*)\b((?:if|while|for|switch)\s*\(|do\b|else\b)/ && $line !~ /^.#/) {
+ my $pre_ctx = "$1$2";
+
my ($level, @ctx) = ctx_statement_level($linenr, $realcnt, 0);
my $ctx_ln = $linenr + $#ctx + 1;
my $ctx_cnt = $realcnt - $#ctx - 1;
my $ctx = join("\n", @ctx);
+ ##warn "realcnt<$realcnt> ctx_cnt<$ctx_cnt>\n";
+
# Skip over any removed lines in the context following statement.
- while ($ctx_cnt > 0 && $lines[$ctx_ln - 1] =~ /^-/) {
+ while (defined($lines[$ctx_ln - 1]) && $lines[$ctx_ln - 1] =~ /^-/) {
$ctx_ln++;
- $ctx_cnt--;
}
- ##warn "line<$line>\nctx<$ctx>\nnext<$lines[$ctx_ln - 1]>";
+ ##warn "pre<$pre_ctx>\nline<$line>\nctx<$ctx>\nnext<$lines[$ctx_ln - 1]>\n";
- if ($ctx !~ /{\s*/ && $ctx_cnt > 0 && $lines[$ctx_ln - 1] =~ /^\+\s*{/) {
- ERROR("That open brace { should be on the previous line\n" .
+ if ($ctx !~ /{\s*/ && defined($lines[$ctx_ln -1]) && $lines[$ctx_ln - 1] =~ /^\+\s*{/) {
+ ERROR("that open brace { should be on the previous line\n" .
"$here\n$ctx\n$lines[$ctx_ln - 1]");
}
- if ($level == 0 && $ctx =~ /\)\s*\;\s*$/ && defined $lines[$ctx_ln - 1]) {
+ if ($level == 0 && $pre_ctx !~ /}\s*while\s*\($/ &&
+ $ctx =~ /\)\s*\;\s*$/ &&
+ defined $lines[$ctx_ln - 1])
+ {
my ($nlength, $nindent) = line_stats($lines[$ctx_ln - 1]);
if ($nindent > $indent) {
- WARN("Trailing semicolon indicates no statements, indent implies otherwise\n" .
+ WARN("trailing semicolon indicates no statements, indent implies otherwise\n" .
"$here\n$ctx\n$lines[$ctx_ln - 1]");
}
}
@@ -1200,7 +1249,7 @@ sub process {
# check for initialisation to aggregates open brace on the next line
if ($prevline =~ /$Declare\s*$Ident\s*=\s*$/ &&
$line =~ /^.\s*{/) {
- ERROR("That open brace { should be on the previous line\n" . $hereprev);
+ ERROR("that open brace { should be on the previous line\n" . $hereprev);
}
#
@@ -1325,22 +1374,31 @@ sub process {
# check for spaces between functions and their parentheses.
while ($line =~ /($Ident)\s+\(/g) {
my $name = $1;
- my $ctx = substr($line, 0, $-[1]);
+ my $ctx_before = substr($line, 0, $-[1]);
+ my $ctx = "$ctx_before$name";
# Ignore those directives where spaces _are_ permitted.
- if ($name =~ /^(?:if|for|while|switch|return|volatile|__volatile__|__attribute__|format|__extension__|Copyright|case|__asm__)$/) {
+ if ($name =~ /^(?:
+ if|for|while|switch|return|case|
+ volatile|__volatile__|
+ __attribute__|format|__extension__|
+ asm|__asm__)$/x)
+ {
# cpp #define statements have non-optional spaces, ie
# if there is a space between the name and the open
# parenthesis it is simply not a parameter group.
- } elsif ($ctx =~ /^.\#\s*define\s*$/) {
+ } elsif ($ctx_before =~ /^.\#\s*define\s*$/) {
+
+ # cpp #elif statement condition may start with a (
+ } elsif ($ctx =~ /^.\#\s*elif\s*$/) {
# If this whole things ends with a type its most
# likely a typedef for a function.
- } elsif ("$ctx$name" =~ /$Type$/) {
+ } elsif ($ctx =~ /$Type$/) {
} else {
- WARN("no space between function name and open parenthesis '('\n" . $herecurr);
+ WARN("space prohibited between function name and open parenthesis '('\n" . $herecurr);
}
}
# Check operator spacing.
@@ -1359,13 +1417,21 @@ sub process {
for (my $n = 0; $n < $#elements; $n += 2) {
$off += length($elements[$n]);
+ # Pick up the preceeding and succeeding characters.
+ my $ca = substr($opline, 0, $off);
+ my $cc = '';
+ if (length($opline) >= ($off + length($elements[$n + 1]))) {
+ $cc = substr($opline, $off + length($elements[$n + 1]));
+ }
+ my $cb = "$ca$;$cc";
+
my $a = '';
$a = 'V' if ($elements[$n] ne '');
$a = 'W' if ($elements[$n] =~ /\s$/);
$a = 'C' if ($elements[$n] =~ /$;$/);
$a = 'B' if ($elements[$n] =~ /(\[|\()$/);
$a = 'O' if ($elements[$n] eq '');
- $a = 'E' if ($elements[$n] eq '' && $n == 0);
+ $a = 'E' if ($ca =~ /^\s*$/);
my $op = $elements[$n + 1];
@@ -1381,14 +1447,6 @@ sub process {
$c = 'E';
}
- # Pick up the preceeding and succeeding characters.
- my $ca = substr($opline, 0, $off);
- my $cc = '';
- if (length($opline) >= ($off + length($elements[$n + 1]))) {
- $cc = substr($opline, $off + length($elements[$n + 1]));
- }
- my $cb = "$ca$;$cc";
-
my $ctx = "${a}x${c}";
my $at = "(ctx:$ctx)";
@@ -1424,7 +1482,7 @@ sub process {
} elsif ($op eq ';') {
if ($ctx !~ /.x[WEBC]/ &&
$cc !~ /^\\/ && $cc !~ /^;/) {
- ERROR("need space after that '$op' $at\n" . $hereptr);
+ ERROR("space required after that '$op' $at\n" . $hereptr);
}
# // is a comment
@@ -1433,13 +1491,13 @@ sub process {
# -> should have no spaces
} elsif ($op eq '->') {
if ($ctx =~ /Wx.|.xW/) {
- ERROR("no spaces around that '$op' $at\n" . $hereptr);
+ ERROR("spaces prohibited around that '$op' $at\n" . $hereptr);
}
# , must have a space on the right.
} elsif ($op eq ',') {
if ($ctx !~ /.x[WEC]/ && $cc !~ /^}/) {
- ERROR("need space after that '$op' $at\n" . $hereptr);
+ ERROR("space required after that '$op' $at\n" . $hereptr);
}
# '*' as part of a type definition -- reported already.
@@ -1452,21 +1510,26 @@ sub process {
} elsif ($op eq '!' || $op eq '~' ||
($is_unary && ($op eq '*' || $op eq '-' || $op eq '&'))) {
if ($ctx !~ /[WEBC]x./ && $ca !~ /(?:\)|!|~|\*|-|\&|\||\+\+|\-\-|\{)$/) {
- ERROR("need space before that '$op' $at\n" . $hereptr);
+ ERROR("space required before that '$op' $at\n" . $hereptr);
}
if ($ctx =~ /.xW/) {
- ERROR("no space after that '$op' $at\n" . $hereptr);
+ ERROR("space prohibited after that '$op' $at\n" . $hereptr);
}
# unary ++ and unary -- are allowed no space on one side.
} elsif ($op eq '++' or $op eq '--') {
- if ($ctx !~ /[WOBC]x[^W]/ && $ctx !~ /[^W]x[WOBEC]/) {
- ERROR("need space one side of that '$op' $at\n" . $hereptr);
+ if ($ctx !~ /[WEOBC]x[^W]/ && $ctx !~ /[^W]x[WOBEC]/) {
+ ERROR("space required one side of that '$op' $at\n" . $hereptr);
+ }
+ if ($ctx =~ /Wx[BE]/ ||
+ ($ctx =~ /Wx./ && $cc =~ /^;/)) {
+ ERROR("space prohibited before that '$op' $at\n" . $hereptr);
}
- if ($ctx =~ /WxB/ || ($ctx =~ /Wx./ && $cc =~ /^;/)) {
- ERROR("no space before that '$op' $at\n" . $hereptr);
+ if ($ctx =~ /ExW/) {
+ ERROR("space prohibited after that '$op' $at\n" . $hereptr);
}
+
# << and >> may either have or not have spaces both sides
} elsif ($op eq '<<' or $op eq '>>' or
$op eq '&' or $op eq '^' or $op eq '|' or
@@ -1474,7 +1537,7 @@ sub process {
$op eq '*' or $op eq '/' or
$op eq '%')
{
- if ($ctx !~ /VxV|WxW|VxE|WxE|VxO|Cx.|.xC/) {
+ if ($ctx =~ /Wx[^WCE]|[^WCE]xW/) {
ERROR("need consistent spacing around '$op' $at\n" .
$hereptr);
}
@@ -1484,7 +1547,7 @@ sub process {
# Ignore email addresses <foo@bar>
if (!($op eq '<' && $cb =~ /$;\S+\@\S+>/) &&
!($op eq '>' && $cb =~ /<\S+\@\S+$;/)) {
- ERROR("need spaces around that '$op' $at\n" . $hereptr);
+ ERROR("spaces required around that '$op' $at\n" . $hereptr);
}
}
$off += length($elements[$n + 1]);
@@ -1514,31 +1577,31 @@ sub process {
#need space before brace following if, while, etc
if (($line =~ /\(.*\){/ && $line !~ /\($Type\){/) ||
$line =~ /do{/) {
- ERROR("need a space before the open brace '{'\n" . $herecurr);
+ ERROR("space required before the open brace '{'\n" . $herecurr);
}
# closing brace should have a space following it when it has anything
# on the line
if ($line =~ /}(?!(?:,|;|\)))\S/) {
- ERROR("need a space after that close brace '}'\n" . $herecurr);
+ ERROR("space required after that close brace '}'\n" . $herecurr);
}
# check spacing on square brackets
if ($line =~ /\[\s/ && $line !~ /\[\s*$/) {
- ERROR("no space after that open square bracket '['\n" . $herecurr);
+ ERROR("space prohibited after that open square bracket '['\n" . $herecurr);
}
if ($line =~ /\s\]/) {
- ERROR("no space before that close square bracket ']'\n" . $herecurr);
+ ERROR("space prohibited before that close square bracket ']'\n" . $herecurr);
}
# check spacing on paretheses
if ($line =~ /\(\s/ && $line !~ /\(\s*(?:\\)?$/ &&
$line !~ /for\s*\(\s+;/) {
- ERROR("no space after that open parenthesis '('\n" . $herecurr);
+ ERROR("space prohibited after that open parenthesis '('\n" . $herecurr);
}
if ($line =~ /(\s+)\)/ && $line !~ /^.\s*\)/ &&
$line !~ /for\s*\(.*;\s+\)/) {
- ERROR("no space before that close parenthesis ')'\n" . $herecurr);
+ ERROR("space prohibited before that close parenthesis ')'\n" . $herecurr);
}
#goto labels aren't indented, allow a single space however
@@ -1549,7 +1612,7 @@ sub process {
# Need a space before open parenthesis after if, while etc
if ($line=~/\b(if|while|for|switch)\(/) {
- ERROR("need a space before the open parenthesis '('\n" . $herecurr);
+ ERROR("space required before the open parenthesis '('\n" . $herecurr);
}
# Check for illegal assignment in if conditional.
@@ -1562,10 +1625,12 @@ sub process {
# Find out what is on the end of the line after the
# conditional.
- substr($s, 0, length($c)) = '';
+ substr($s, 0, length($c), '');
$s =~ s/\n.*//g;
$s =~ s/$;//g; # Remove any comments
- if (length($c) && $s !~ /^\s*({|;|)\s*\\*\s*$/) {
+ if (length($c) && $s !~ /^\s*({|;|)\s*\\*\s*$/ &&
+ $c !~ /^.\#\s*if/)
+ {
ERROR("trailing statements should be on next line\n" . $herecurr);
}
}
@@ -1607,7 +1672,7 @@ sub process {
# Find out what is on the end of the line after the
# conditional.
- substr($s, 0, length($c)) = '';
+ substr($s, 0, length($c), '');
$s =~ s/\n.*//g;
if ($s =~ /^\s*;/) {
@@ -1631,7 +1696,7 @@ sub process {
if ($tree && $rawline =~ m{^.\#\s*include\s*\<asm\/(.*)\.h\>}) {
my $checkfile = "$root/include/linux/$1.h";
if (-f $checkfile && $1 ne 'irq.h') {
- CHK("Use #include <linux/$1.h> instead of <asm/$1.h>\n" .
+ WARN("Use #include <linux/$1.h> instead of <asm/$1.h>\n" .
$herecurr);
}
}
@@ -1692,15 +1757,24 @@ sub process {
if ($#chunks > 0 && $level == 0) {
my $allowed = 0;
my $seen = 0;
- my $herectx = $here . "\n";;
+ my $herectx = $here . "\n";
my $ln = $linenr - 1;
for my $chunk (@chunks) {
my ($cond, $block) = @{$chunk};
- $herectx .= "$rawlines[$ln]\n[...]\n";
+ # If the condition carries leading newlines, then count those as offsets.
+ my ($whitespace) = ($cond =~ /^((?:\s*\n[+-])*\s*)/s);
+ my $offset = statement_rawlines($whitespace) - 1;
+
+ #print "COND<$cond> whitespace<$whitespace> offset<$offset>\n";
+
+ # We have looked at and allowed this specific line.
+ $suppress_ifbraces{$ln + $offset} = 1;
+
+ $herectx .= "$rawlines[$ln + $offset]\n[...]\n";
$ln += statement_rawlines($block) - 1;
- substr($block, 0, length($cond)) = '';
+ substr($block, 0, length($cond), '');
$seen++ if ($block =~ /^\s*{/);
@@ -1721,16 +1795,10 @@ sub process {
if ($seen && !$allowed) {
WARN("braces {} are not necessary for any arm of this statement\n" . $herectx);
}
- # Either way we have looked over this whole
- # statement and said what needs to be said.
- $suppress_ifbraces = $endln;
}
}
- if ($linenr > $suppress_ifbraces &&
+ if (!defined $suppress_ifbraces{$linenr - 1} &&
$line =~ /\b(if|while|for|else)\b/) {
- my ($level, $endln, @chunks) =
- ctx_statement_full($linenr, $realcnt, $-[0]);
-
my $allowed = 0;
# Check the pre-context.
@@ -1738,10 +1806,15 @@ sub process {
#print "APW: ALLOWED: pre<$1>\n";
$allowed = 1;
}
+
+ my ($level, $endln, @chunks) =
+ ctx_statement_full($linenr, $realcnt, $-[0]);
+
# Check the condition.
my ($cond, $block) = @{$chunks[0]};
+ #print "CHECKING<$linenr> cond<$cond> block<$block>\n";
if (defined $cond) {
- substr($block, 0, length($cond)) = '';
+ substr($block, 0, length($cond), '');
}
if (statement_lines($cond) > 1) {
#print "APW: ALLOWED: cond<$cond>\n";
@@ -1759,7 +1832,7 @@ sub process {
if (defined $chunks[1]) {
my ($cond, $block) = @{$chunks[1]};
if (defined $cond) {
- substr($block, 0, length($cond)) = '';
+ substr($block, 0, length($cond), '');
}
if ($block =~ /^\s*\{/) {
#print "APW: ALLOWED: chunk-1 block<$block>\n";
@@ -1882,6 +1955,28 @@ sub process {
if ($line =~ /__FUNCTION__/) {
WARN("__func__ should be used instead of gcc specific __FUNCTION__\n" . $herecurr);
}
+
+# check for semaphores used as mutexes
+ if ($line =~ /\b(DECLARE_MUTEX|init_MUTEX)\s*\(/) {
+ WARN("mutexes are preferred for single holder semaphores\n" . $herecurr);
+ }
+# check for semaphores used as mutexes
+ if ($line =~ /\binit_MUTEX_LOCKED\s*\(/) {
+ WARN("consider using a completion\n" . $herecurr);
+ }
+# recommend strict_strto* over simple_strto*
+ if ($line =~ /\bsimple_(strto.*?)\s*\(/) {
+ WARN("consider using strict_$1 in preference to simple_$1\n" . $herecurr);
+ }
+
+# use of NR_CPUS is usually wrong
+# ignore definitions of NR_CPUS and usage to define arrays as likely right
+ if ($line =~ /\bNR_CPUS\b/ &&
+ $line !~ /^.#\s*define\s+NR_CPUS\s+/ &&
+ $line !~ /^.\s*$Declare\s.*\[[^\]]*NR_CPUS[^\]]*\]/)
+ {
+ WARN("usage of NR_CPUS is often wrong - consider using cpu_possible(), num_possible_cpus(), for_each_possible_cpu(), etc\n" . $herecurr);
+ }
}
# If we have no input at all, then there is nothing to report on
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index 9ddf944cce2..348d8687b7c 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -51,11 +51,13 @@ do { \
sprintf(str + strlen(str), "*"); \
} while(0)
+unsigned int cross_build = 0;
/**
* Check that sizeof(device_id type) are consistent with size of section
* in .o file. If in-consistent then userspace and kernel does not agree
* on actual size which is a bug.
* Also verify that the final entry in the table is all zeros.
+ * Ignore both checks if build host differ from target host and size differs.
**/
static void device_id_check(const char *modname, const char *device_id,
unsigned long size, unsigned long id_size,
@@ -64,6 +66,8 @@ static void device_id_check(const char *modname, const char *device_id,
int i;
if (size % id_size || size < id_size) {
+ if (cross_build != 0)
+ return;
fatal("%s: sizeof(struct %s_device_id)=%lu is not a modulo "
"of the size of section __mod_%s_device_table=%lu.\n"
"Fix definition of struct %s_device_id "
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 695b5d657cf..110cf243fa4 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -2026,7 +2026,7 @@ int main(int argc, char **argv)
int opt;
int err;
- while ((opt = getopt(argc, argv, "i:I:msSo:awM:K:")) != -1) {
+ while ((opt = getopt(argc, argv, "i:I:cmsSo:awM:K:")) != -1) {
switch (opt) {
case 'i':
kernel_read = optarg;
@@ -2035,6 +2035,9 @@ int main(int argc, char **argv)
module_read = optarg;
external_module = 1;
break;
+ case 'c':
+ cross_build = 1;
+ break;
case 'm':
modversions = 1;
break;
diff --git a/scripts/mod/modpost.h b/scripts/mod/modpost.h
index 565c5872407..09f58e33d22 100644
--- a/scripts/mod/modpost.h
+++ b/scripts/mod/modpost.h
@@ -135,6 +135,7 @@ struct elf_info {
};
/* file2alias.c */
+extern unsigned int cross_build;
void handle_moddevtable(struct module *mod, struct elf_info *info,
Elf_Sym *sym, const char *symname);
void add_moddevtable(struct buffer *buf, struct module *mod);
diff --git a/security/capability.c b/security/capability.c
index 9e99f36a8b5..2c6e06d18fa 100644
--- a/security/capability.c
+++ b/security/capability.c
@@ -40,7 +40,6 @@ static struct security_operations capability_ops = {
.inode_need_killpriv = cap_inode_need_killpriv,
.inode_killpriv = cap_inode_killpriv,
- .task_kill = cap_task_kill,
.task_setscheduler = cap_task_setscheduler,
.task_setioprio = cap_task_setioprio,
.task_setnice = cap_task_setnice,
diff --git a/security/commoncap.c b/security/commoncap.c
index bb0c095f576..06d5c9469ba 100644
--- a/security/commoncap.c
+++ b/security/commoncap.c
@@ -540,41 +540,6 @@ int cap_task_setnice (struct task_struct *p, int nice)
return cap_safe_nice(p);
}
-int cap_task_kill(struct task_struct *p, struct siginfo *info,
- int sig, u32 secid)
-{
- if (info != SEND_SIG_NOINFO && (is_si_special(info) || SI_FROMKERNEL(info)))
- return 0;
-
- /*
- * Running a setuid root program raises your capabilities.
- * Killing your own setuid root processes was previously
- * allowed.
- * We must preserve legacy signal behavior in this case.
- */
- if (p->uid == current->uid)
- return 0;
-
- /* sigcont is permitted within same session */
- if (sig == SIGCONT && (task_session_nr(current) == task_session_nr(p)))
- return 0;
-
- if (secid)
- /*
- * Signal sent as a particular user.
- * Capabilities are ignored. May be wrong, but it's the
- * only thing we can do at the moment.
- * Used only by usb drivers?
- */
- return 0;
- if (cap_issubset(p->cap_permitted, current->cap_permitted))
- return 0;
- if (capable(CAP_KILL))
- return 0;
-
- return -EPERM;
-}
-
/*
* called from kernel/sys.c for prctl(PR_CABSET_DROP)
* done without task_capability_lock() because it introduces
@@ -605,11 +570,6 @@ int cap_task_setnice (struct task_struct *p, int nice)
{
return 0;
}
-int cap_task_kill(struct task_struct *p, struct siginfo *info,
- int sig, u32 secid)
-{
- return 0;
-}
#endif
void cap_task_reparent_to_init (struct task_struct *p)
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 4bf4807f2d4..c2fef7b12dc 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -800,7 +800,8 @@ static void selinux_sb_clone_mnt_opts(const struct super_block *oldsb,
mutex_unlock(&newsbsec->lock);
}
-int selinux_parse_opts_str(char *options, struct security_mnt_opts *opts)
+static int selinux_parse_opts_str(char *options,
+ struct security_mnt_opts *opts)
{
char *p;
char *context = NULL, *defcontext = NULL;
@@ -1629,6 +1630,12 @@ static inline u32 file_to_av(struct file *file)
else
av |= FILE__WRITE;
}
+ if (!av) {
+ /*
+ * Special file opened with flags 3 for ioctl-only use.
+ */
+ av = FILE__IOCTL;
+ }
return av;
}
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index 0241fd35967..732ba27923c 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -1117,11 +1117,6 @@ static int smack_task_movememory(struct task_struct *p)
static int smack_task_kill(struct task_struct *p, struct siginfo *info,
int sig, u32 secid)
{
- int rc;
-
- rc = cap_task_kill(p, info, sig, secid);
- if (rc != 0)
- return rc;
/*
* Special cases where signals really ought to go through
* in spite of policy. Stephen Smalley suggests it may
@@ -1508,7 +1503,7 @@ static int smack_shm_associate(struct shmid_kernel *shp, int shmflg)
*/
static int smack_shm_shmctl(struct shmid_kernel *shp, int cmd)
{
- char *ssp = smack_of_shm(shp);
+ char *ssp;
int may;
switch (cmd) {
@@ -1532,6 +1527,7 @@ static int smack_shm_shmctl(struct shmid_kernel *shp, int cmd)
return -EINVAL;
}
+ ssp = smack_of_shm(shp);
return smk_curacc(ssp, may);
}
@@ -1616,7 +1612,7 @@ static int smack_sem_associate(struct sem_array *sma, int semflg)
*/
static int smack_sem_semctl(struct sem_array *sma, int cmd)
{
- char *ssp = smack_of_sem(sma);
+ char *ssp;
int may;
switch (cmd) {
@@ -1645,6 +1641,7 @@ static int smack_sem_semctl(struct sem_array *sma, int cmd)
return -EINVAL;
}
+ ssp = smack_of_sem(sma);
return smk_curacc(ssp, may);
}
@@ -1730,7 +1727,7 @@ static int smack_msg_queue_associate(struct msg_queue *msq, int msqflg)
*/
static int smack_msg_queue_msgctl(struct msg_queue *msq, int cmd)
{
- char *msp = smack_of_msq(msq);
+ char *msp;
int may;
switch (cmd) {
@@ -1752,6 +1749,7 @@ static int smack_msg_queue_msgctl(struct msg_queue *msq, int cmd)
return -EINVAL;
}
+ msp = smack_of_msq(msq);
return smk_curacc(msp, may);
}
diff --git a/security/smack/smackfs.c b/security/smack/smackfs.c
index afe7c9b0732..cfae8afcc26 100644
--- a/security/smack/smackfs.c
+++ b/security/smack/smackfs.c
@@ -74,11 +74,6 @@ struct smk_list_entry *smack_list;
#define SEQ_READ_FINISHED 1
/*
- * Disable concurrent writing open() operations
- */
-static struct semaphore smack_write_sem;
-
-/*
* Values for parsing cipso rules
* SMK_DIGITLEN: Length of a digit field in a rule.
* SMK_CIPSOMIN: Minimum possible cipso rule length.
@@ -168,32 +163,7 @@ static struct seq_operations load_seq_ops = {
*/
static int smk_open_load(struct inode *inode, struct file *file)
{
- if ((file->f_flags & O_ACCMODE) == O_RDONLY)
- return seq_open(file, &load_seq_ops);
-
- if (down_interruptible(&smack_write_sem))
- return -ERESTARTSYS;
-
- return 0;
-}
-
-/**
- * smk_release_load - release() for /smack/load
- * @inode: inode structure representing file
- * @file: "load" file pointer
- *
- * For a reading session, use the seq_file release
- * implementation.
- * Otherwise, we are at the end of a writing session so
- * clean everything up.
- */
-static int smk_release_load(struct inode *inode, struct file *file)
-{
- if ((file->f_flags & O_ACCMODE) == O_RDONLY)
- return seq_release(inode, file);
-
- up(&smack_write_sem);
- return 0;
+ return seq_open(file, &load_seq_ops);
}
/**
@@ -341,7 +311,7 @@ static const struct file_operations smk_load_ops = {
.read = seq_read,
.llseek = seq_lseek,
.write = smk_write_load,
- .release = smk_release_load,
+ .release = seq_release,
};
/**
@@ -1011,7 +981,6 @@ static int __init init_smk_fs(void)
}
}
- sema_init(&smack_write_sem, 1);
smk_cipso_doi();
smk_unlbl_ambient(NULL);
diff --git a/sound/oss/ac97_codec.c b/sound/oss/ac97_codec.c
index 87a67268076..b63839e8f9b 100644
--- a/sound/oss/ac97_codec.c
+++ b/sound/oss/ac97_codec.c
@@ -1202,3 +1202,5 @@ static int pt101_init(struct ac97_codec * codec)
EXPORT_SYMBOL(ac97_probe_codec);
+MODULE_LICENSE("GPL");
+
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index 569ecaca0e8..889a897d41a 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -1187,10 +1187,8 @@ static struct i2c_driver aic3x_i2c_driver = {
.name = "aic3x I2C Codec",
.owner = THIS_MODULE,
},
- .id = I2C_DRIVERID_I2CDEV,
.attach_adapter = aic3x_i2c_attach,
.detach_client = aic3x_i2c_detach,
- .command = NULL,
};
static struct i2c_client client_template = {