diff options
| -rw-r--r-- | drivers/usb/host/Kconfig | 81 |
1 files changed, 42 insertions, 39 deletions
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 436b6828afd..bc9123c0c68 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -93,14 +93,19 @@ config USB_EHCI_TT_NEWSCHED If unsure, say Y. +config USB_FSL_MPH_DR_OF + tristate + +if USB_EHCI_HCD + config USB_EHCI_PCI tristate - depends on USB_EHCI_HCD && PCI + depends on PCI default y config USB_EHCI_HCD_PMC_MSP tristate "EHCI support for on-chip PMC MSP71xx USB controller" - depends on USB_EHCI_HCD && MSP_HAS_USB + depends on MSP_HAS_USB default n select USB_EHCI_BIG_ENDIAN_DESC select USB_EHCI_BIG_ENDIAN_MMIO @@ -110,15 +115,13 @@ config USB_EHCI_HCD_PMC_MSP config USB_EHCI_BIG_ENDIAN_MMIO bool - depends on USB_EHCI_HCD config USB_EHCI_BIG_ENDIAN_DESC bool - depends on USB_EHCI_HCD config XPS_USB_HCD_XILINX bool "Use Xilinx usb host EHCI controller core" - depends on USB_EHCI_HCD && (PPC32 || MICROBLAZE) + depends on (PPC32 || MICROBLAZE) select USB_EHCI_BIG_ENDIAN_DESC select USB_EHCI_BIG_ENDIAN_MMIO ---help--- @@ -127,12 +130,9 @@ config XPS_USB_HCD_XILINX support both high speed and full speed devices, or high speed devices only. -config USB_FSL_MPH_DR_OF - tristate - config USB_EHCI_FSL bool "Support for Freescale PPC on-chip EHCI USB controller" - depends on USB_EHCI_HCD && FSL_SOC + depends on FSL_SOC select USB_EHCI_ROOT_HUB_TT select USB_FSL_MPH_DR_OF if OF ---help--- @@ -140,14 +140,14 @@ config USB_EHCI_FSL config USB_EHCI_MXC tristate "Support for Freescale i.MX on-chip EHCI USB controller" - depends on USB_EHCI_HCD && ARCH_MXC + depends on ARCH_MXC select USB_EHCI_ROOT_HUB_TT ---help--- Variation of ARC USB block used in some Freescale chips. config USB_EHCI_HCD_OMAP tristate "EHCI support for OMAP3 and later chips" - depends on USB_EHCI_HCD && ARCH_OMAP + depends on ARCH_OMAP select NOP_USB_XCEIV default y ---help--- @@ -183,7 +183,7 @@ config USB_EHCI_HCD_AT91 config USB_EHCI_MSM tristate "Support for Qualcomm QSD/MSM on-chip EHCI USB controller" - depends on USB_EHCI_HCD && ARCH_MSM + depends on ARCH_MSM select USB_EHCI_ROOT_HUB_TT select USB_MSM_OTG ---help--- @@ -196,7 +196,7 @@ config USB_EHCI_MSM config USB_EHCI_TEGRA boolean "NVIDIA Tegra HCD support" - depends on USB_EHCI_HCD && ARCH_TEGRA + depends on ARCH_TEGRA select USB_EHCI_ROOT_HUB_TT select USB_PHY help @@ -205,7 +205,7 @@ config USB_EHCI_TEGRA config USB_EHCI_HCD_PPC_OF bool "EHCI support for PPC USB controller on OF platform bus" - depends on USB_EHCI_HCD && PPC_OF + depends on PPC_OF default y ---help--- Enables support for the USB controller present on the PowerPC @@ -213,21 +213,21 @@ config USB_EHCI_HCD_PPC_OF config USB_EHCI_SH bool "EHCI support for SuperH USB controller" - depends on USB_EHCI_HCD && SUPERH + depends on SUPERH ---help--- Enables support for the on-chip EHCI controller on the SuperH. If you use the PCI EHCI controller, this option is not necessary. config USB_EHCI_S5P tristate "EHCI support for Samsung S5P/EXYNOS SoC Series" - depends on USB_EHCI_HCD && PLAT_S5P + depends on PLAT_S5P help Enable support for the Samsung S5Pxxxx and Exynos3/4/5 SOC's on-chip EHCI controller. config USB_EHCI_MV bool "EHCI support for Marvell PXA/MMP USB controller" - depends on USB_EHCI_HCD && (ARCH_PXA || ARCH_MMP) + depends on (ARCH_PXA || ARCH_MMP) select USB_EHCI_ROOT_HUB_TT ---help--- Enables support for Marvell (including PXA and MMP series) on-chip @@ -240,13 +240,13 @@ config USB_EHCI_MV config USB_W90X900_EHCI bool "W90X900(W90P910) EHCI support" - depends on USB_EHCI_HCD && ARCH_W90X900 + depends on ARCH_W90X900 ---help--- Enables support for the W90X900 USB controller config USB_CNS3XXX_EHCI bool "Cavium CNS3XXX EHCI Module (DEPRECATED)" - depends on USB_EHCI_HCD && ARCH_CNS3XXX + depends on ARCH_CNS3XXX select USB_EHCI_HCD_PLATFORM ---help--- This option is deprecated now and the driver was removed, use @@ -258,7 +258,7 @@ config USB_CNS3XXX_EHCI config USB_EHCI_ATH79 bool "EHCI support for AR7XXX/AR9XXX SoCs (DEPRECATED)" - depends on USB_EHCI_HCD && (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X) + depends on (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X) select USB_EHCI_ROOT_HUB_TT select USB_EHCI_HCD_PLATFORM default y @@ -269,6 +269,28 @@ config USB_EHCI_ATH79 Enables support for the built-in EHCI controller present on the Atheros AR7XXX/AR9XXX SoCs. +config USB_EHCI_HCD_PLATFORM + tristate "Generic EHCI driver for a platform device" + default n + ---help--- + Adds an EHCI host driver for a generic platform device, which + provides a memory space and an irq. + + If unsure, say N. + +config USB_OCTEON_EHCI + bool "Octeon on-chip EHCI support" + depends on CPU_CAVIUM_OCTEON + default n + select USB_EHCI_BIG_ENDIAN_MMIO + help + Enable support for the Octeon II SOC's on-chip EHCI + controller. It is needed for high-speed (480Mbit/sec) + USB 2.0 device support. All CN6XXX based chips with USB are + supported. + +endif # USB_EHCI_HCD + config USB_OXU210HP_HCD tristate "OXU210HP HCD support" depends on GENERIC_HARDIRQS @@ -450,15 +472,6 @@ config USB_OHCI_HCD_PLATFORM If unsure, say N. -config USB_EHCI_HCD_PLATFORM - tristate "Generic EHCI driver for a platform device" - depends on USB_EHCI_HCD - default n - ---help--- - Adds an EHCI host driver for a generic platform device, which - provides a memory space and an irq. - - If unsure, say N. config USB_OHCI_BIG_ENDIAN_DESC bool @@ -651,16 +664,6 @@ config USB_IMX21_HCD To compile this driver as a module, choose M here: the module will be called "imx21-hcd". -config USB_OCTEON_EHCI - bool "Octeon on-chip EHCI support" - depends on USB_EHCI_HCD && CPU_CAVIUM_OCTEON - default n - select USB_EHCI_BIG_ENDIAN_MMIO - help - Enable support for the Octeon II SOC's on-chip EHCI - controller. It is needed for high-speed (480Mbit/sec) - USB 2.0 device support. All CN6XXX based chips with USB are - supported. config USB_OCTEON_OHCI bool "Octeon on-chip OHCI support" |