summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/serial/sh-sci.c77
-rw-r--r--include/linux/serial_sci.h1
2 files changed, 47 insertions, 31 deletions
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 408624ae7fe..3daf76725ac 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -76,8 +76,10 @@ struct sci_port {
int break_flag;
#ifdef CONFIG_HAVE_CLK
- /* Port clock */
- struct clk *clk;
+ /* Interface clock */
+ struct clk *iclk;
+ /* Data clock */
+ struct clk *dclk;
#endif
struct list_head node;
};
@@ -166,12 +168,12 @@ static void h8300_sci_config(struct uart_port *port, unsigned int ctrl)
*mstpcrl &= ~mask;
}
-static inline void h8300_sci_enable(struct uart_port *port)
+static void h8300_sci_enable(struct uart_port *port)
{
h8300_sci_config(port, sci_enable);
}
-static inline void h8300_sci_disable(struct uart_port *port)
+static void h8300_sci_disable(struct uart_port *port)
{
h8300_sci_config(port, sci_disable);
}
@@ -742,13 +744,34 @@ static int sci_notifier(struct notifier_block *self,
(phase == CPUFREQ_RESUMECHANGE)) {
spin_lock_irqsave(&priv->lock, flags);
list_for_each_entry(sci_port, &priv->ports, node)
- sci_port->port.uartclk = clk_get_rate(sci_port->clk);
+ sci_port->port.uartclk = clk_get_rate(sci_port->dclk);
spin_unlock_irqrestore(&priv->lock, flags);
}
return NOTIFY_OK;
}
+
+static void sci_clk_enable(struct uart_port *port)
+{
+ struct sci_port *sci_port = to_sci_port(port);
+
+ clk_enable(sci_port->dclk);
+ sci_port->port.uartclk = clk_get_rate(sci_port->dclk);
+
+ if (sci_port->iclk)
+ clk_enable(sci_port->iclk);
+}
+
+static void sci_clk_disable(struct uart_port *port)
+{
+ struct sci_port *sci_port = to_sci_port(port);
+
+ if (sci_port->iclk)
+ clk_disable(sci_port->iclk);
+
+ clk_disable(sci_port->dclk);
+}
#endif
static int sci_request_irq(struct sci_port *port)
@@ -880,10 +903,6 @@ static int sci_startup(struct uart_port *port)
if (s->enable)
s->enable(port);
-#ifdef CONFIG_HAVE_CLK
- s->clk = clk_get(NULL, "module_clk");
-#endif
-
sci_request_irq(s);
sci_start_tx(port);
sci_start_rx(port, 1);
@@ -901,11 +920,6 @@ static void sci_shutdown(struct uart_port *port)
if (s->disable)
s->disable(port);
-
-#ifdef CONFIG_HAVE_CLK
- clk_put(s->clk);
- s->clk = NULL;
-#endif
}
static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
@@ -1048,7 +1062,8 @@ static struct uart_ops sci_uart_ops = {
#endif
};
-static void __devinit sci_init_single(struct sci_port *sci_port,
+static void __devinit sci_init_single(struct platform_device *dev,
+ struct sci_port *sci_port,
unsigned int index,
struct plat_sci_port *p)
{
@@ -1064,14 +1079,10 @@ static void __devinit sci_init_single(struct sci_port *sci_port,
#endif
sci_port->port.uartclk = CONFIG_CPU_CLOCK;
#elif defined(CONFIG_HAVE_CLK)
- /*
- * XXX: We should use a proper SCI/SCIF clock
- */
- {
- struct clk *clk = clk_get(NULL, "module_clk");
- sci_port->port.uartclk = clk_get_rate(clk);
- clk_put(clk);
- }
+ sci_port->iclk = p->clk ? clk_get(&dev->dev, p->clk) : NULL;
+ sci_port->dclk = clk_get(&dev->dev, "module_clk");
+ sci_port->enable = sci_clk_enable;
+ sci_port->disable = sci_clk_disable;
#else
#error "Need a valid uartclk"
#endif
@@ -1085,9 +1096,11 @@ static void __devinit sci_init_single(struct sci_port *sci_port,
sci_port->port.irq = p->irqs[SCIx_TXI_IRQ];
sci_port->port.flags = p->flags;
+ sci_port->port.dev = &dev->dev;
sci_port->type = sci_port->port.type = p->type;
memcpy(&sci_port->irqs, &p->irqs, sizeof(p->irqs));
+
}
#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
@@ -1111,14 +1124,21 @@ static void serial_console_write(struct console *co, const char *s,
unsigned count)
{
struct uart_port *port = co->data;
+ struct sci_port *sci_port = to_sci_port(port);
unsigned short bits;
- uart_console_write(co->data, s, count, serial_console_putchar);
+ if (sci_port->enable)
+ sci_port->enable(port);
+
+ uart_console_write(port, s, count, serial_console_putchar);
/* wait until fifo is empty and last bit has been transmitted */
bits = SCxSR_TDxE(port) | SCxSR_TEND(port);
while ((sci_in(port, SCxSR) & bits) != bits)
cpu_relax();
+
+ if (sci_port->disable);
+ sci_port->disable(port);
}
static int __init serial_console_setup(struct console *co, char *options)
@@ -1152,11 +1172,6 @@ static int __init serial_console_setup(struct console *co, char *options)
if (!port->type)
return -ENODEV;
-#ifdef CONFIG_HAVE_CLK
- if (!sci_port->clk)
- sci_port->clk = clk_get(NULL, "module_clk");
-#endif
-
sci_config_port(port, 0);
if (sci_port->enable)
@@ -1171,6 +1186,7 @@ static int __init serial_console_setup(struct console *co, char *options)
if (ret == 0)
sci_stop_rx(port);
#endif
+ /* TODO: disable clock */
return ret;
}
@@ -1250,8 +1266,7 @@ static int __devinit sci_probe_single(struct platform_device *dev,
return 0;
}
- sciport->port.dev = &dev->dev;
- sci_init_single(sciport, index, p);
+ sci_init_single(dev, sciport, index, p);
ret = uart_add_one_port(&sci_uart_driver, &sciport->port);
if (ret)
diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h
index 717059d6791..1c297ddc9d5 100644
--- a/include/linux/serial_sci.h
+++ b/include/linux/serial_sci.h
@@ -25,6 +25,7 @@ struct plat_sci_port {
unsigned int irqs[SCIx_NR_IRQS]; /* ERI, RXI, TXI, BRI */
unsigned int type; /* SCI / SCIF / IRDA */
upf_t flags; /* UPF_* flags */
+ char *clk; /* clock string */
};
#endif /* __LINUX_SERIAL_SCI_H */