diff options
| -rw-r--r-- | arch/arm/Kconfig.debug | 54 | ||||
| -rw-r--r-- | arch/arm/include/asm/hardware/debug-pl01x.S | 7 | ||||
| -rw-r--r-- | arch/arm/include/debug/bcm2835.S | 9 | ||||
| -rw-r--r-- | arch/arm/include/debug/cns3xxx.S | 7 | ||||
| -rw-r--r-- | arch/arm/include/debug/highbank.S | 6 | ||||
| -rw-r--r-- | arch/arm/include/debug/mxs.S | 14 | ||||
| -rw-r--r-- | arch/arm/include/debug/nomadik.S | 8 | ||||
| -rw-r--r-- | arch/arm/include/debug/nspire.S | 10 | ||||
| -rw-r--r-- | arch/arm/include/debug/u300.S | 11 | ||||
| -rw-r--r-- | arch/arm/include/debug/vexpress.S | 46 | ||||
| -rw-r--r-- | arch/arm/mach-ep93xx/include/mach/debug-macro.S | 9 | ||||
| -rw-r--r-- | arch/arm/mach-integrator/include/mach/debug-macro.S | 7 | ||||
| -rw-r--r-- | arch/arm/mach-realview/include/mach/debug-macro.S | 17 | ||||
| -rw-r--r-- | arch/arm/mach-versatile/include/mach/debug-macro.S | 8 |
14 files changed, 57 insertions, 156 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 09e70090cfd..f9573d9a6d9 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -92,6 +92,7 @@ choice config DEBUG_BCM2835 bool "Kernel low-level debugging on BCM2835 PL011 UART" depends on ARCH_BCM2835 + select DEBUG_UART_PL01X config DEBUG_CLPS711X_UART1 bool "Kernel low-level debugging messages via UART1" @@ -110,6 +111,7 @@ choice config DEBUG_CNS3XXX bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx" depends on ARCH_CNS3XXX + select DEBUG_UART_PL01X help Say Y here if you want the debug print routines to direct their output to the CNS3xxx UART0. @@ -177,6 +179,7 @@ choice config DEBUG_HIGHBANK_UART bool "Kernel low-level debugging messages via Highbank UART" depends on ARCH_HIGHBANK + select DEBUG_UART_PL01X help Say Y here if you want the debug print routines to direct their output to the UART on Highbank based devices. @@ -191,6 +194,7 @@ choice config DEBUG_IMX23_UART bool "i.MX23 Debug UART" depends on SOC_IMX23 + select DEBUG_UART_PL01X help Say Y here if you want kernel low-level debugging support on i.MX23. @@ -212,6 +216,7 @@ choice config DEBUG_IMX28_UART bool "i.MX28 Debug UART" depends on SOC_IMX28 + select DEBUG_UART_PL01X help Say Y here if you want kernel low-level debugging support on i.MX28. @@ -362,6 +367,7 @@ choice config DEBUG_NOMADIK_UART bool "Kernel low-level debugging messages via NOMADIK UART" depends on ARCH_NOMADIK + select DEBUG_UART_PL01X help Say Y here if you want kernel low-level debugging support on NOMADIK based platforms. @@ -377,6 +383,7 @@ choice config DEBUG_NSPIRE_CX_UART bool "Kernel low-level debugging via TI-NSPIRE PL011 UART" depends on ARCH_NSPIRE + select DEBUG_UART_PL01X help Say Y here if you want kernel low-level debugging support on TI-NSPIRE CX models. @@ -467,6 +474,7 @@ choice config DEBUG_REALVIEW_STD_PORT bool "RealView Default UART" depends on ARCH_REALVIEW + select DEBUG_UART_PL01X help Say Y here if you want the debug print routines to direct their output to the serial port on RealView EB, PB11MP, PBA8 @@ -475,6 +483,7 @@ choice config DEBUG_REALVIEW_PB1176_PORT bool "RealView PB1176 UART" depends on MACH_REALVIEW_PB1176 + select DEBUG_UART_PL01X help Say Y here if you want the debug print routines to direct their output to the standard serial port on the RealView @@ -706,6 +715,7 @@ choice config DEBUG_U300_UART bool "Kernel low-level debugging messages via U300 UART0" depends on ARCH_U300 + select DEBUG_UART_PL01X help Say Y here if you want the debug print routines to direct their output to the uart port on U300 devices. @@ -731,6 +741,7 @@ choice config DEBUG_VEXPRESS_UART0_CA9 bool "Use PL011 UART0 at 0x10009000 (V2P-CA9 core tile)" depends on ARCH_VEXPRESS + select DEBUG_UART_PL01X help This option selects UART0 at 0x10009000. Except for custom models, this applies only to the V2P-CA9 tile. @@ -738,6 +749,7 @@ choice config DEBUG_VEXPRESS_UART0_RS1 bool "Use PL011 UART0 at 0x1c090000 (RS1 complaint tiles)" depends on ARCH_VEXPRESS + select DEBUG_UART_PL01X help This option selects UART0 at 0x1c090000. This applies to most of the tiles using the RS1 memory map, including all new A-class @@ -746,6 +758,7 @@ choice config DEBUG_VEXPRESS_UART0_CRX bool "Use PL011 UART0 at 0xb0090000 (Cortex-R compliant tiles)" depends on ARCH_VEXPRESS && !MMU + select DEBUG_UART_PL01X help This option selects UART0 at 0xb0090000. This is appropriate for Cortex-R series tiles and SMMs, such as Cortex-R5 and Cortex-R7 @@ -865,6 +878,11 @@ config DEBUG_LL_INCLUDE default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1 default "mach/debug-macro.S" +config DEBUG_UART_PL01X + def_bool ARCH_EP93XX || \ + ARCH_INTEGRATOR || \ + ARCH_VERSATILE + config DEBUG_UART_8250 def_bool ARCH_DOVE || ARCH_EBSA110 || \ (FOOTBRIDGE && !DEBUG_DC21285_PORT) || \ @@ -877,17 +895,30 @@ config DEBUG_UART_PHYS default 0x01c28000 if DEBUG_SUNXI_UART0 default 0x01c28400 if DEBUG_SUNXI_UART1 default 0x03010fe0 if ARCH_RPC + default 0x10009000 if DEBUG_REALVIEW_STD_PORT || DEBUG_CNS3XXX || \ + DEBUG_VEXPRESS_UART0_CA9 + default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT default 0x10124000 if DEBUG_RK3X_UART0 default 0x10126000 if DEBUG_RK3X_UART1 + default 0x101f1000 if ARCH_VERSATILE + default 0x101fb000 if DEBUG_NOMADIK_UART + default 0x16000000 if ARCH_INTEGRATOR + default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1 default 0x20060000 if DEBUG_RK29_UART0 default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 + default 0x20201000 if DEBUG_BCM2835 default 0x40090000 if ARCH_LPC32XX default 0x40100000 if DEBUG_PXA_UART1 default 0x42000000 if ARCH_GEMINI default 0x7c0003f8 if FOOTBRIDGE default 0x80230000 if DEBUG_PICOXCELL_UART - default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART + default 0x80070000 if DEBUG_IMX23_UART + default 0x80074000 if DEBUG_IMX28_UART + default 0x808c0000 if ARCH_EP93XX + default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART + default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX + default 0xc0013000 if DEBUG_U300_UART default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN default 0xd0012000 if DEBUG_MVEBU_UART @@ -900,23 +931,34 @@ config DEBUG_UART_PHYS default 0xfe800000 if ARCH_IOP32X default 0xffc02000 if DEBUG_SOCFPGA_UART default 0xffd82340 if ARCH_IOP13XX + default 0xfff36000 if DEBUG_HIGHBANK_UART default 0xfffff700 if ARCH_IOP33X - depends on DEBUG_UART_8250 + depends on DEBUG_UART_8250 || DEBUG_UART_PL01X config DEBUG_UART_VIRT hex "Virtual base address of debug UART" default 0xe0010fe0 if ARCH_RPC default 0xf0000be0 if ARCH_EBSA110 + default 0xf0009000 if DEBUG_CNS3XXX + default 0xf01fb000 if DEBUG_NOMADIK_UART + default 0xf0201000 if DEBUG_BCM2835 + default 0xf11f1000 if ARCH_VERSATILE + default 0xf1600000 if ARCH_INTEGRATOR default 0xf1c28000 if DEBUG_SUNXI_UART0 default 0xf1c28400 if DEBUG_SUNXI_UART1 default 0xf2100000 if DEBUG_PXA_UART1 default 0xf4090000 if ARCH_LPC32XX default 0xf4200000 if ARCH_GEMINI + default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9 + default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1 + default 0xfb009000 if DEBUG_REALVIEW_STD_PORT + default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT default 0xfd012000 if ARCH_MV78XX0 default 0xfde12000 if ARCH_DOVE default 0xfe012000 if ARCH_ORION5X default 0xfe017000 if DEBUG_MMP_UART2 default 0xfe018000 if DEBUG_MMP_UART3 + default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART default 0xfe230000 if DEBUG_PICOXCELL_UART default 0xfe800000 if ARCH_IOP32X default 0xfeb24000 if DEBUG_RK3X_UART0 @@ -927,13 +969,17 @@ config DEBUG_UART_VIRT default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 default 0xfec02000 if DEBUG_SOCFPGA_UART default 0xfed12000 if ARCH_KIRKWOOD + default 0xfedc0000 if ARCH_EP93XX default 0xfee003f8 if FOOTBRIDGE - default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART + default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART + default 0xfee36000 if DEBUG_HIGHBANK_UART default 0xfee82340 if ARCH_IOP13XX default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN default 0xfefff700 if ARCH_IOP33X - depends on DEBUG_UART_8250 + default 0xff003000 if DEBUG_U300_UART + default DEBUG_UART_PHYS if !MMU + depends on DEBUG_UART_8250 || DEBUG_UART_PL01X config DEBUG_UART_8250_SHIFT int "Register offset shift for the 8250 debug UART" diff --git a/arch/arm/include/asm/hardware/debug-pl01x.S b/arch/arm/include/asm/hardware/debug-pl01x.S index f9fd083eff6..9d1e286cecf 100644 --- a/arch/arm/include/asm/hardware/debug-pl01x.S +++ b/arch/arm/include/asm/hardware/debug-pl01x.S @@ -12,6 +12,13 @@ */ #include <linux/amba/serial.h> +#ifdef CONFIG_DEBUG_UART_PHYS + .macro addruart, rp, rv, tmp + ldr \rp, =CONFIG_DEBUG_UART_PHYS + ldr \rv, =CONFIG_DEBUG_UART_VIRT + .endm +#endif + .macro senduart,rd,rx strb \rd, [\rx, #UART01x_DR] .endm diff --git a/arch/arm/include/debug/bcm2835.S b/arch/arm/include/debug/bcm2835.S index aed9199bd84..726e0694293 100644 --- a/arch/arm/include/debug/bcm2835.S +++ b/arch/arm/include/debug/bcm2835.S @@ -10,13 +10,4 @@ * published by the Free Software Foundation. * */ - -#define BCM2835_DEBUG_PHYS 0x20201000 -#define BCM2835_DEBUG_VIRT 0xf0201000 - - .macro addruart, rp, rv, tmp - ldr \rp, =BCM2835_DEBUG_PHYS - ldr \rv, =BCM2835_DEBUG_VIRT - .endm - #include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/include/debug/cns3xxx.S b/arch/arm/include/debug/cns3xxx.S index d04c150baa1..2d5fb519df2 100644 --- a/arch/arm/include/debug/cns3xxx.S +++ b/arch/arm/include/debug/cns3xxx.S @@ -9,11 +9,4 @@ * it under the terms of the GNU General Public License, Version 2, as * published by the Free Software Foundation. */ - - .macro addruart,rp,rv,tmp - mov \rp, #0x00009000 - orr \rv, \rp, #0xf0000000 @ virtual base - orr \rp, \rp, #0x10000000 - .endm - #include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/include/debug/highbank.S b/arch/arm/include/debug/highbank.S index 8cad4322a5a..3c6f63ff0d3 100644 --- a/arch/arm/include/debug/highbank.S +++ b/arch/arm/include/debug/highbank.S @@ -8,10 +8,4 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - - .macro addruart,rp,rv,tmp - ldr \rv, =0xfee36000 - ldr \rp, =0xfff36000 - .endm - #include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/include/debug/mxs.S b/arch/arm/include/debug/mxs.S index d86951551ca..8a10ed264b0 100644 --- a/arch/arm/include/debug/mxs.S +++ b/arch/arm/include/debug/mxs.S @@ -10,18 +10,4 @@ * published by the Free Software Foundation. * */ - -#ifdef CONFIG_DEBUG_IMX23_UART -#define UART_PADDR 0x80070000 -#elif defined (CONFIG_DEBUG_IMX28_UART) -#define UART_PADDR 0x80074000 -#endif - -#define UART_VADDR 0xfe100000 - - .macro addruart, rp, rv, tmp - ldr \rp, =UART_PADDR @ physical - ldr \rv, =UART_VADDR @ virtual - .endm - #include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/include/debug/nomadik.S b/arch/arm/include/debug/nomadik.S index 735417922ce..a6d238eba21 100644 --- a/arch/arm/include/debug/nomadik.S +++ b/arch/arm/include/debug/nomadik.S @@ -9,12 +9,4 @@ * published by the Free Software Foundation. * */ - - .macro addruart, rp, rv, tmp - mov \rp, #0x00100000 - add \rp, \rp, #0x000fb000 - add \rv, \rp, #0xf0000000 @ virtual base - add \rp, \rp, #0x10000000 @ physical base address - .endm - #include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/include/debug/nspire.S b/arch/arm/include/debug/nspire.S index 9c2fbeceedd..fc17e50cc6d 100644 --- a/arch/arm/include/debug/nspire.S +++ b/arch/arm/include/debug/nspire.S @@ -8,14 +8,4 @@ * published by the Free Software Foundation. * */ -#ifdef CONFIG_DEBUG_NSPIRE_CX_UART -#define NSPIRE_EARLY_UART_PHYS_BASE 0x90020000 -#define NSPIRE_EARLY_UART_VIRT_BASE 0xfee20000 - -.macro addruart, rp, rv, tmp - ldr \rp, =(NSPIRE_EARLY_UART_PHYS_BASE) @ physical base address - ldr \rv, =(NSPIRE_EARLY_UART_VIRT_BASE) @ virtual base address -.endm - #include <asm/hardware/debug-pl01x.S> -#endif diff --git a/arch/arm/include/debug/u300.S b/arch/arm/include/debug/u300.S index 6f04f08a203..58b9d6286cd 100644 --- a/arch/arm/include/debug/u300.S +++ b/arch/arm/include/debug/u300.S @@ -4,15 +4,4 @@ * Debugging macro include header. * Author: Linus Walleij <linus.walleij@stericsson.com> */ -#define U300_SLOW_PER_PHYS_BASE 0xc0010000 -#define U300_SLOW_PER_VIRT_BASE 0xff000000 - - .macro addruart, rp, rv, tmp - /* If we move the address using MMU, use this. */ - ldr \rp, = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address - ldr \rv, = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address - orr \rp, \rp, #0x00003000 - orr \rv, \rv, #0x00003000 - .endm - #include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/include/debug/vexpress.S b/arch/arm/include/debug/vexpress.S index acafb229e2b..114bf4cc6ea 100644 --- a/arch/arm/include/debug/vexpress.S +++ b/arch/arm/include/debug/vexpress.S @@ -48,50 +48,4 @@ .endm #include <asm/hardware/debug-pl01x.S> - -#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_CA9) - - .macro addruart,rp,rv,tmp - mov \rp, #DEBUG_LL_UART_OFFSET - orr \rv, \rp, #DEBUG_LL_VIRT_BASE - orr \rp, \rp, #DEBUG_LL_PHYS_BASE - .endm - -#include <asm/hardware/debug-pl01x.S> - -#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_RS1) - - .macro addruart,rp,rv,tmp - mov \rp, #DEBUG_LL_UART_OFFSET_RS1 - orr \rv, \rp, #DEBUG_LL_VIRT_BASE - orr \rp, \rp, #DEBUG_LL_PHYS_BASE_RS1 - .endm - -#include <asm/hardware/debug-pl01x.S> - -#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_CRX) - - .macro addruart,rp,tmp,tmp2 - ldr \rp, =DEBUG_LL_UART_PHYS_CRX - .endm - -#include <asm/hardware/debug-pl01x.S> - -#else /* CONFIG_DEBUG_LL_UART_NONE */ - - .macro addruart, rp, rv, tmp - /* Safe dummy values */ - mov \rp, #0 - mov \rv, #DEBUG_LL_VIRT_BASE - .endm - - .macro senduart,rd,rx - .endm - - .macro waituart,rd,rx - .endm - - .macro busyuart,rd,rx - .endm - #endif diff --git a/arch/arm/mach-ep93xx/include/mach/debug-macro.S b/arch/arm/mach-ep93xx/include/mach/debug-macro.S index af54e43132c..a1bfe4cbf74 100644 --- a/arch/arm/mach-ep93xx/include/mach/debug-macro.S +++ b/arch/arm/mach-ep93xx/include/mach/debug-macro.S @@ -9,13 +9,4 @@ * the Free Software Foundation; either version 2 of the License, or (at * your option) any later version. */ -#include <mach/ep93xx-regs.h> - - .macro addruart, rp, rv, tmp - ldr \rp, =EP93XX_APB_PHYS_BASE @ Physical base - ldr \rv, =EP93XX_APB_VIRT_BASE @ virtual base - orr \rp, \rp, #0x000c0000 - orr \rv, \rv, #0x000c0000 - .endm - #include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-integrator/include/mach/debug-macro.S b/arch/arm/mach-integrator/include/mach/debug-macro.S index 411b116077e..03ee0fd8860 100644 --- a/arch/arm/mach-integrator/include/mach/debug-macro.S +++ b/arch/arm/mach-integrator/include/mach/debug-macro.S @@ -10,11 +10,4 @@ * published by the Free Software Foundation. * */ - - .macro addruart, rp, rv, tmp - mov \rp, #0x16000000 @ physical base address - mov \rv, #0xf0000000 @ virtual base - add \rv, \rv, #0x16000000 >> 4 - .endm - #include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S index 8cc372dc66a..99488f4a7d4 100644 --- a/arch/arm/mach-realview/include/mach/debug-macro.S +++ b/arch/arm/mach-realview/include/mach/debug-macro.S @@ -9,21 +9,4 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - -#ifdef CONFIG_DEBUG_REALVIEW_STD_PORT -#define DEBUG_LL_UART_OFFSET 0x00009000 -#elif defined(CONFIG_DEBUG_REALVIEW_PB1176_PORT) -#define DEBUG_LL_UART_OFFSET 0x0010c000 -#endif - -#ifndef DEBUG_LL_UART_OFFSET -#error "Unknown RealView platform" -#endif - - .macro addruart, rp, rv, tmp - mov \rp, #DEBUG_LL_UART_OFFSET - orr \rv, \rp, #0xfb000000 @ virtual base - orr \rp, \rp, #0x10000000 @ physical base - .endm - #include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-versatile/include/mach/debug-macro.S b/arch/arm/mach-versatile/include/mach/debug-macro.S index d0fbd7f1cb0..c25697774d1 100644 --- a/arch/arm/mach-versatile/include/mach/debug-macro.S +++ b/arch/arm/mach-versatile/include/mach/debug-macro.S @@ -10,12 +10,4 @@ * published by the Free Software Foundation. * */ - - .macro addruart, rp, rv, tmp - mov \rp, #0x001F0000 - orr \rp, \rp, #0x00001000 - orr \rv, \rp, #0xf1000000 @ virtual base - orr \rp, \rp, #0x10000000 @ physical base - .endm - #include <asm/hardware/debug-pl01x.S> |