summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/input/gpio-keys.txt10
-rw-r--r--Documentation/devicetree/bindings/input/stmpe-keypad.txt2
-rw-r--r--drivers/input/evdev.c60
-rw-r--r--drivers/input/input.c22
-rw-r--r--drivers/input/keyboard/Kconfig1
-rw-r--r--drivers/input/keyboard/gpio_keys.c114
-rw-r--r--drivers/input/keyboard/stmpe-keypad.c141
-rw-r--r--drivers/input/mouse/alps.c84
-rw-r--r--drivers/input/mouse/trackpoint.c4
-rw-r--r--drivers/input/mouse/trackpoint.h5
-rw-r--r--drivers/input/touchscreen/edt-ft5x06.c4
-rw-r--r--drivers/mfd/stmpe.c4
-rw-r--r--drivers/mfd/stmpe.h3
-rw-r--r--include/linux/mfd/stmpe.h22
14 files changed, 299 insertions, 177 deletions
diff --git a/Documentation/devicetree/bindings/input/gpio-keys.txt b/Documentation/devicetree/bindings/input/gpio-keys.txt
index a4a38fcf2ed..44b705767ac 100644
--- a/Documentation/devicetree/bindings/input/gpio-keys.txt
+++ b/Documentation/devicetree/bindings/input/gpio-keys.txt
@@ -10,12 +10,13 @@ Optional properties:
Each button (key) is represented as a sub-node of "gpio-keys":
Subnode properties:
+ - gpios: OF device-tree gpio specification.
+ - interrupts: the interrupt line for that input.
- label: Descriptive name of the key.
- linux,code: Keycode to emit.
-Required mutual exclusive subnode-properties:
- - gpios: OF device-tree gpio specification.
- - interrupts: the interrupt line for that input
+Note that either "interrupts" or "gpios" properties can be omitted, but not
+both at the same time. Specifying both properties is allowed.
Optional subnode-properties:
- linux,input-type: Specify event type this button/key generates.
@@ -23,6 +24,9 @@ Optional subnode-properties:
- debounce-interval: Debouncing interval time in milliseconds.
If not specified defaults to 5.
- gpio-key,wakeup: Boolean, button can wake-up the system.
+ - linux,can-disable: Boolean, indicates that button is connected
+ to dedicated (not shared) interrupt which can be disabled to
+ suppress events from the button.
Example nodes:
diff --git a/Documentation/devicetree/bindings/input/stmpe-keypad.txt b/Documentation/devicetree/bindings/input/stmpe-keypad.txt
index 1b97222e8a0..12bb771d66d 100644
--- a/Documentation/devicetree/bindings/input/stmpe-keypad.txt
+++ b/Documentation/devicetree/bindings/input/stmpe-keypad.txt
@@ -8,6 +8,8 @@ Optional properties:
- debounce-interval : Debouncing interval time in milliseconds
- st,scan-count : Scanning cycles elapsed before key data is updated
- st,no-autorepeat : If specified device will not autorepeat
+ - keypad,num-rows : See ./matrix-keymap.txt
+ - keypad,num-columns : See ./matrix-keymap.txt
Example:
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index bc203485716..b1a52abc58d 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -28,6 +28,13 @@
#include <linux/cdev.h>
#include "input-compat.h"
+enum evdev_clock_type {
+ EV_CLK_REAL = 0,
+ EV_CLK_MONO,
+ EV_CLK_BOOT,
+ EV_CLK_MAX
+};
+
struct evdev {
int open;
struct input_handle handle;
@@ -49,12 +56,32 @@ struct evdev_client {
struct fasync_struct *fasync;
struct evdev *evdev;
struct list_head node;
- int clkid;
+ int clk_type;
bool revoked;
unsigned int bufsize;
struct input_event buffer[];
};
+static int evdev_set_clk_type(struct evdev_client *client, unsigned int clkid)
+{
+ switch (clkid) {
+
+ case CLOCK_REALTIME:
+ client->clk_type = EV_CLK_REAL;
+ break;
+ case CLOCK_MONOTONIC:
+ client->clk_type = EV_CLK_MONO;
+ break;
+ case CLOCK_BOOTTIME:
+ client->clk_type = EV_CLK_BOOT;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
/* flush queued events of type @type, caller must hold client->buffer_lock */
static void __evdev_flush_queue(struct evdev_client *client, unsigned int type)
{
@@ -108,8 +135,11 @@ static void evdev_queue_syn_dropped(struct evdev_client *client)
struct input_event ev;
ktime_t time;
- time = (client->clkid == CLOCK_MONOTONIC) ?
- ktime_get() : ktime_get_real();
+ time = client->clk_type == EV_CLK_REAL ?
+ ktime_get_real() :
+ client->clk_type == EV_CLK_MONO ?
+ ktime_get() :
+ ktime_get_boottime();
ev.time = ktime_to_timeval(time);
ev.type = EV_SYN;
@@ -159,7 +189,7 @@ static void __pass_event(struct evdev_client *client,
static void evdev_pass_values(struct evdev_client *client,
const struct input_value *vals, unsigned int count,
- ktime_t mono, ktime_t real)
+ ktime_t *ev_time)
{
struct evdev *evdev = client->evdev;
const struct input_value *v;
@@ -169,8 +199,7 @@ static void evdev_pass_values(struct evdev_client *client,
if (client->revoked)
return;
- event.time = ktime_to_timeval(client->clkid == CLOCK_MONOTONIC ?
- mono : real);
+ event.time = ktime_to_timeval(ev_time[client->clk_type]);
/* Interrupts are disabled, just acquire the lock. */
spin_lock(&client->buffer_lock);
@@ -198,21 +227,22 @@ static void evdev_events(struct input_handle *handle,
{
struct evdev *evdev = handle->private;
struct evdev_client *client;
- ktime_t time_mono, time_real;
+ ktime_t ev_time[EV_CLK_MAX];
- time_mono = ktime_get();
- time_real = ktime_mono_to_real(time_mono);
+ ev_time[EV_CLK_MONO] = ktime_get();
+ ev_time[EV_CLK_REAL] = ktime_mono_to_real(ev_time[EV_CLK_MONO]);
+ ev_time[EV_CLK_BOOT] = ktime_mono_to_any(ev_time[EV_CLK_MONO],
+ TK_OFFS_BOOT);
rcu_read_lock();
client = rcu_dereference(evdev->grab);
if (client)
- evdev_pass_values(client, vals, count, time_mono, time_real);
+ evdev_pass_values(client, vals, count, ev_time);
else
list_for_each_entry_rcu(client, &evdev->client_list, node)
- evdev_pass_values(client, vals, count,
- time_mono, time_real);
+ evdev_pass_values(client, vals, count, ev_time);
rcu_read_unlock();
}
@@ -877,10 +907,8 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
case EVIOCSCLOCKID:
if (copy_from_user(&i, p, sizeof(unsigned int)))
return -EFAULT;
- if (i != CLOCK_MONOTONIC && i != CLOCK_REALTIME)
- return -EINVAL;
- client->clkid = i;
- return 0;
+
+ return evdev_set_clk_type(client, i);
case EVIOCGKEYCODE:
return evdev_handle_get_keycode(dev, p);
diff --git a/drivers/input/input.c b/drivers/input/input.c
index 04217c2e345..213e3a1903e 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -1974,18 +1974,22 @@ static unsigned int input_estimate_events_per_packet(struct input_dev *dev)
events = mt_slots + 1; /* count SYN_MT_REPORT and SYN_REPORT */
- for (i = 0; i < ABS_CNT; i++) {
- if (test_bit(i, dev->absbit)) {
- if (input_is_mt_axis(i))
- events += mt_slots;
- else
- events++;
+ if (test_bit(EV_ABS, dev->evbit)) {
+ for (i = 0; i < ABS_CNT; i++) {
+ if (test_bit(i, dev->absbit)) {
+ if (input_is_mt_axis(i))
+ events += mt_slots;
+ else
+ events++;
+ }
}
}
- for (i = 0; i < REL_CNT; i++)
- if (test_bit(i, dev->relbit))
- events++;
+ if (test_bit(EV_REL, dev->evbit)) {
+ for (i = 0; i < REL_CNT; i++)
+ if (test_bit(i, dev->relbit))
+ events++;
+ }
/* Make room for KEY and MSC events */
events += 7;
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 96ee26c555e..a5d9b3f3c87 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -559,6 +559,7 @@ config KEYBOARD_SH_KEYSC
config KEYBOARD_STMPE
tristate "STMPE keypad support"
depends on MFD_STMPE
+ depends on OF
select INPUT_MATRIXKMAP
help
Say Y here if you want to use the keypad controller on STMPE I/O
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index f44f05b70ee..eefd976ab4e 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -35,9 +35,13 @@
struct gpio_button_data {
const struct gpio_keys_button *button;
struct input_dev *input;
- struct timer_list timer;
- struct work_struct work;
- unsigned int timer_debounce; /* in msecs */
+
+ struct timer_list release_timer;
+ unsigned int release_delay; /* in msecs, for IRQ-only buttons */
+
+ struct delayed_work work;
+ unsigned int software_debounce; /* in msecs, for GPIO-driven buttons */
+
unsigned int irq;
spinlock_t lock;
bool disabled;
@@ -116,11 +120,14 @@ static void gpio_keys_disable_button(struct gpio_button_data *bdata)
{
if (!bdata->disabled) {
/*
- * Disable IRQ and possible debouncing timer.
+ * Disable IRQ and associated timer/work structure.
*/
disable_irq(bdata->irq);
- if (bdata->timer_debounce)
- del_timer_sync(&bdata->timer);
+
+ if (gpio_is_valid(bdata->button->gpio))
+ cancel_delayed_work_sync(&bdata->work);
+ else
+ del_timer_sync(&bdata->release_timer);
bdata->disabled = true;
}
@@ -343,7 +350,7 @@ static void gpio_keys_gpio_report_event(struct gpio_button_data *bdata)
static void gpio_keys_gpio_work_func(struct work_struct *work)
{
struct gpio_button_data *bdata =
- container_of(work, struct gpio_button_data, work);
+ container_of(work, struct gpio_button_data, work.work);
gpio_keys_gpio_report_event(bdata);
@@ -351,13 +358,6 @@ static void gpio_keys_gpio_work_func(struct work_struct *work)
pm_relax(bdata->input->dev.parent);
}
-static void gpio_keys_gpio_timer(unsigned long _data)
-{
- struct gpio_button_data *bdata = (struct gpio_button_data *)_data;
-
- schedule_work(&bdata->work);
-}
-
static irqreturn_t gpio_keys_gpio_isr(int irq, void *dev_id)
{
struct gpio_button_data *bdata = dev_id;
@@ -366,11 +366,10 @@ static irqreturn_t gpio_keys_gpio_isr(int irq, void *dev_id)
if (bdata->button->wakeup)
pm_stay_awake(bdata->input->dev.parent);
- if (bdata->timer_debounce)
- mod_timer(&bdata->timer,
- jiffies + msecs_to_jiffies(bdata->timer_debounce));
- else
- schedule_work(&bdata->work);
+
+ mod_delayed_work(system_wq,
+ &bdata->work,
+ msecs_to_jiffies(bdata->software_debounce));
return IRQ_HANDLED;
}
@@ -408,7 +407,7 @@ static irqreturn_t gpio_keys_irq_isr(int irq, void *dev_id)
input_event(input, EV_KEY, button->code, 1);
input_sync(input);
- if (!bdata->timer_debounce) {
+ if (!bdata->release_delay) {
input_event(input, EV_KEY, button->code, 0);
input_sync(input);
goto out;
@@ -417,9 +416,9 @@ static irqreturn_t gpio_keys_irq_isr(int irq, void *dev_id)
bdata->key_pressed = true;
}
- if (bdata->timer_debounce)
- mod_timer(&bdata->timer,
- jiffies + msecs_to_jiffies(bdata->timer_debounce));
+ if (bdata->release_delay)
+ mod_timer(&bdata->release_timer,
+ jiffies + msecs_to_jiffies(bdata->release_delay));
out:
spin_unlock_irqrestore(&bdata->lock, flags);
return IRQ_HANDLED;
@@ -429,10 +428,10 @@ static void gpio_keys_quiesce_key(void *data)
{
struct gpio_button_data *bdata = data;
- if (bdata->timer_debounce)
- del_timer_sync(&bdata->timer);
-
- cancel_work_sync(&bdata->work);
+ if (gpio_is_valid(bdata->button->gpio))
+ cancel_delayed_work_sync(&bdata->work);
+ else
+ del_timer_sync(&bdata->release_timer);
}
static int gpio_keys_setup_key(struct platform_device *pdev,
@@ -466,23 +465,25 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
button->debounce_interval * 1000);
/* use timer if gpiolib doesn't provide debounce */
if (error < 0)
- bdata->timer_debounce =
+ bdata->software_debounce =
button->debounce_interval;
}
- irq = gpio_to_irq(button->gpio);
- if (irq < 0) {
- error = irq;
- dev_err(dev,
- "Unable to get irq number for GPIO %d, error %d\n",
- button->gpio, error);
- return error;
+ if (button->irq) {
+ bdata->irq = button->irq;
+ } else {
+ irq = gpio_to_irq(button->gpio);
+ if (irq < 0) {
+ error = irq;
+ dev_err(dev,
+ "Unable to get irq number for GPIO %d, error %d\n",
+ button->gpio, error);
+ return error;
+ }
+ bdata->irq = irq;
}
- bdata->irq = irq;
- INIT_WORK(&bdata->work, gpio_keys_gpio_work_func);
- setup_timer(&bdata->timer,
- gpio_keys_gpio_timer, (unsigned long)bdata);
+ INIT_DELAYED_WORK(&bdata->work, gpio_keys_gpio_work_func);
isr = gpio_keys_gpio_isr;
irqflags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING;
@@ -499,8 +500,8 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
return -EINVAL;
}
- bdata->timer_debounce = button->debounce_interval;
- setup_timer(&bdata->timer,
+ bdata->release_delay = button->debounce_interval;
+ setup_timer(&bdata->release_timer,
gpio_keys_irq_timer, (unsigned long)bdata);
isr = gpio_keys_irq_isr;
@@ -510,7 +511,7 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
input_set_capability(input, button->type ?: EV_KEY, button->code);
/*
- * Install custom action to cancel debounce timer and
+ * Install custom action to cancel release timer and
* workqueue item.
*/
error = devm_add_action(&pdev->dev, gpio_keys_quiesce_key, bdata);
@@ -618,33 +619,30 @@ gpio_keys_get_devtree_pdata(struct device *dev)
i = 0;
for_each_child_of_node(node, pp) {
- int gpio = -1;
enum of_gpio_flags flags;
button = &pdata->buttons[i++];
- if (!of_find_property(pp, "gpios", NULL)) {
- button->irq = irq_of_parse_and_map(pp, 0);
- if (button->irq == 0) {
- i--;
- pdata->nbuttons--;
- dev_warn(dev, "Found button without gpios or irqs\n");
- continue;
- }
- } else {
- gpio = of_get_gpio_flags(pp, 0, &flags);
- if (gpio < 0) {
- error = gpio;
+ button->gpio = of_get_gpio_flags(pp, 0, &flags);
+ if (button->gpio < 0) {
+ error = button->gpio;
+ if (error != -ENOENT) {
if (error != -EPROBE_DEFER)
dev_err(dev,
"Failed to get gpio flags, error: %d\n",
error);
return ERR_PTR(error);
}
+ } else {
+ button->active_low = flags & OF_GPIO_ACTIVE_LOW;
}
- button->gpio = gpio;
- button->active_low = flags & OF_GPIO_ACTIVE_LOW;
+ button->irq = irq_of_parse_and_map(pp, 0);
+
+ if (!gpio_is_valid(button->gpio) && !button->irq) {
+ dev_err(dev, "Found button without gpios or irqs\n");
+ return ERR_PTR(-EINVAL);
+ }
if (of_property_read_u32(pp, "linux,code", &button->code)) {
dev_err(dev, "Button without keycode: 0x%x\n",
@@ -659,6 +657,8 @@ gpio_keys_get_devtree_pdata(struct device *dev)
button->wakeup = !!of_get_property(pp, "gpio-key,wakeup", NULL);
+ button->can_disable = !!of_get_property(pp, "linux,can-disable", NULL);
+
if (of_property_read_u32(pp, "debounce-interval",
&button->debounce_interval))
button->debounce_interval = 5;
diff --git a/drivers/input/keyboard/stmpe-keypad.c b/drivers/input/keyboard/stmpe-keypad.c
index ef5e67fb567..fe6e3f22eed 100644
--- a/drivers/input/keyboard/stmpe-keypad.c
+++ b/drivers/input/keyboard/stmpe-keypad.c
@@ -45,13 +45,14 @@
#define STMPE_KEYPAD_MAX_ROWS 8
#define STMPE_KEYPAD_MAX_COLS 8
#define STMPE_KEYPAD_ROW_SHIFT 3
-#define STMPE_KEYPAD_KEYMAP_SIZE \
+#define STMPE_KEYPAD_KEYMAP_MAX_SIZE \
(STMPE_KEYPAD_MAX_ROWS * STMPE_KEYPAD_MAX_COLS)
/**
* struct stmpe_keypad_variant - model-specific attributes
* @auto_increment: whether the KPC_DATA_BYTE register address
* auto-increments on multiple read
+ * @set_pullup: whether the pins need to have their pull-ups set
* @num_data: number of data bytes
* @num_normal_data: number of normal keys' data bytes
* @max_cols: maximum number of columns supported
@@ -61,6 +62,7 @@
*/
struct stmpe_keypad_variant {
bool auto_increment;
+ bool set_pullup;
int num_data;
int num_normal_data;
int max_cols;
@@ -81,6 +83,7 @@ static const struct stmpe_keypad_variant stmpe_keypad_variants[] = {
},
[STMPE2401] = {
.auto_increment = false,
+ .set_pullup = true,
.num_data = 3,
.num_normal_data = 2,
.max_cols = 8,
@@ -90,6 +93,7 @@ static const struct stmpe_keypad_variant stmpe_keypad_variants[] = {
},
[STMPE2403] = {
.auto_increment = true,
+ .set_pullup = true,
.num_data = 5,
.num_normal_data = 3,
.max_cols = 8,
@@ -99,16 +103,30 @@ static const struct stmpe_keypad_variant stmpe_keypad_variants[] = {
},
};
+/**
+ * struct stmpe_keypad - STMPE keypad state container
+ * @stmpe: pointer to parent STMPE device
+ * @input: spawned input device
+ * @variant: STMPE variant
+ * @debounce_ms: debounce interval, in ms. Maximum is
+ * %STMPE_KEYPAD_MAX_DEBOUNCE.
+ * @scan_count: number of key scanning cycles to confirm key data.
+ * Maximum is %STMPE_KEYPAD_MAX_SCAN_COUNT.
+ * @no_autorepeat: disable key autorepeat
+ * @rows: bitmask for the rows
+ * @cols: bitmask for the columns
+ * @keymap: the keymap
+ */
struct stmpe_keypad {
struct stmpe *stmpe;
struct input_dev *input;
const struct stmpe_keypad_variant *variant;
- const struct stmpe_keypad_platform_data *plat;
-
+ unsigned int debounce_ms;
+ unsigned int scan_count;
+ bool no_autorepeat;
unsigned int rows;
unsigned int cols;
-
- unsigned short keymap[STMPE_KEYPAD_KEYMAP_SIZE];
+ unsigned short keymap[STMPE_KEYPAD_KEYMAP_MAX_SIZE];
};
static int stmpe_keypad_read_data(struct stmpe_keypad *keypad, u8 *data)
@@ -171,7 +189,10 @@ static int stmpe_keypad_altfunc_init(struct stmpe_keypad *keypad)
unsigned int col_gpios = variant->col_gpios;
unsigned int row_gpios = variant->row_gpios;
struct stmpe *stmpe = keypad->stmpe;
+ u8 pureg = stmpe->regs[STMPE_IDX_GPPUR_LSB];
unsigned int pins = 0;
+ unsigned int pu_pins = 0;
+ int ret;
int i;
/*
@@ -188,8 +209,10 @@ static int stmpe_keypad_altfunc_init(struct stmpe_keypad *keypad)
for (i = 0; i < variant->max_cols; i++) {
int num = __ffs(col_gpios);
- if (keypad->cols & (1 << i))
+ if (keypad->cols & (1 << i)) {
pins |= 1 << num;
+ pu_pins |= 1 << num;
+ }
col_gpios &= ~(1 << num);
}
@@ -203,20 +226,43 @@ static int stmpe_keypad_altfunc_init(struct stmpe_keypad *keypad)
row_gpios &= ~(1 << num);
}
- return stmpe_set_altfunc(stmpe, pins, STMPE_BLOCK_KEYPAD);
+ ret = stmpe_set_altfunc(stmpe, pins, STMPE_BLOCK_KEYPAD);
+ if (ret)
+ return ret;
+
+ /*
+ * On STMPE24xx, set pin bias to pull-up on all keypad input
+ * pins (columns), this incidentally happen to be maximum 8 pins
+ * and placed at GPIO0-7 so only the LSB of the pull up register
+ * ever needs to be written.
+ */
+ if (variant->set_pullup) {
+ u8 val;
+
+ ret = stmpe_reg_read(stmpe, pureg);
+ if (ret)
+ return ret;
+
+ /* Do not touch unused pins, may be used for GPIO */
+ val = ret & ~pu_pins;
+ val |= pu_pins;
+
+ ret = stmpe_reg_write(stmpe, pureg, val);
+ }
+
+ return 0;
}
static int stmpe_keypad_chip_init(struct stmpe_keypad *keypad)
{
- const struct stmpe_keypad_platform_data *plat = keypad->plat;
const struct stmpe_keypad_variant *variant = keypad->variant;
struct stmpe *stmpe = keypad->stmpe;
int ret;
- if (plat->debounce_ms > STMPE_KEYPAD_MAX_DEBOUNCE)
+ if (keypad->debounce_ms > STMPE_KEYPAD_MAX_DEBOUNCE)
return -EINVAL;
- if (plat->scan_count > STMPE_KEYPAD_MAX_SCAN_COUNT)
+ if (keypad->scan_count > STMPE_KEYPAD_MAX_SCAN_COUNT)
return -EINVAL;
ret = stmpe_enable(stmpe, STMPE_BLOCK_KEYPAD);
@@ -245,7 +291,7 @@ static int stmpe_keypad_chip_init(struct stmpe_keypad *keypad)
ret = stmpe_set_bits(stmpe, STMPE_KPC_CTRL_MSB,
STMPE_KPC_CTRL_MSB_SCAN_COUNT,
- plat->scan_count << 4);
+ keypad->scan_count << 4);
if (ret < 0)
return ret;
@@ -253,17 +299,18 @@ static int stmpe_keypad_chip_init(struct stmpe_keypad *keypad)
STMPE_KPC_CTRL_LSB_SCAN |
STMPE_KPC_CTRL_LSB_DEBOUNCE,
STMPE_KPC_CTRL_LSB_SCAN |
- (plat->debounce_ms << 1));
+ (keypad->debounce_ms << 1));
}
-static void stmpe_keypad_fill_used_pins(struct stmpe_keypad *keypad)
+static void stmpe_keypad_fill_used_pins(struct stmpe_keypad *keypad,
+ u32 used_rows, u32 used_cols)
{
int row, col;
- for (row = 0; row < STMPE_KEYPAD_MAX_ROWS; row++) {
- for (col = 0; col < STMPE_KEYPAD_MAX_COLS; col++) {
+ for (row = 0; row < used_rows; row++) {
+ for (col = 0; col < used_cols; col++) {
int code = MATRIX_SCAN_CODE(row, col,
- STMPE_KEYPAD_ROW_SHIFT);
+ STMPE_KEYPAD_ROW_SHIFT);
if (keypad->keymap[code] != KEY_RESERVED) {
keypad->rows |= 1 << row;
keypad->cols |= 1 << col;
@@ -272,51 +319,17 @@ static void stmpe_keypad_fill_used_pins(struct stmpe_keypad *keypad)
}
}
-#ifdef CONFIG_OF
-static const struct stmpe_keypad_platform_data *
-stmpe_keypad_of_probe(struct device *dev)
-{
- struct device_node *np = dev->of_node;
- struct stmpe_keypad_platform_data *plat;
-
- if (!np)
- return ERR_PTR(-ENODEV);
-
- plat = devm_kzalloc(dev, sizeof(*plat), GFP_KERNEL);
- if (!plat)
- return ERR_PTR(-ENOMEM);
-
- of_property_read_u32(np, "debounce-interval", &plat->debounce_ms);
- of_property_read_u32(np, "st,scan-count", &plat->scan_count);
-
- plat->no_autorepeat = of_property_read_bool(np, "st,no-autorepeat");
-
- return plat;
-}
-#else
-static inline const struct stmpe_keypad_platform_data *
-stmpe_keypad_of_probe(struct device *dev)
-{
- return ERR_PTR(-EINVAL);
-}
-#endif
-
static int stmpe_keypad_probe(struct platform_device *pdev)
{
struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
- const struct stmpe_keypad_platform_data *plat;
+ struct device_node *np = pdev->dev.of_node;
struct stmpe_keypad *keypad;
struct input_dev *input;
+ u32 rows;
+ u32 cols;
int error;
int irq;
- plat = stmpe->pdata->keypad;
- if (!plat) {
- plat = stmpe_keypad_of_probe(&pdev->dev);
- if (IS_ERR(plat))
- return PTR_ERR(plat);
- }
-
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
@@ -326,6 +339,13 @@ static int stmpe_keypad_probe(struct platform_device *pdev)
if (!keypad)
return -ENOMEM;
+ keypad->stmpe = stmpe;
+ keypad->variant = &stmpe_keypad_variants[stmpe->partnum];
+
+ of_property_read_u32(np, "debounce-interval", &keypad->debounce_ms);
+ of_property_read_u32(np, "st,scan-count", &keypad->scan_count);
+ keypad->no_autorepeat = of_property_read_bool(np, "st,no-autorepeat");
+
input = devm_input_allocate_device(&pdev->dev);
if (!input)
return -ENOMEM;
@@ -334,23 +354,22 @@ static int stmpe_keypad_probe(struct platform_device *pdev)
input->id.bustype = BUS_I2C;
input->dev.parent = &pdev->dev;
- error = matrix_keypad_build_keymap(plat->keymap_data, NULL,
- STMPE_KEYPAD_MAX_ROWS,
- STMPE_KEYPAD_MAX_COLS,
+ error = matrix_keypad_parse_of_params(&pdev->dev, &rows, &cols);
+ if (error)
+ return error;
+
+ error = matrix_keypad_build_keymap(NULL, NULL, rows, cols,
keypad->keymap, input);
if (error)
return error;
input_set_capability(input, EV_MSC, MSC_SCAN);
- if (!plat->no_autorepeat)
+ if (!keypad->no_autorepeat)
__set_bit(EV_REP, input->evbit);
- stmpe_keypad_fill_used_pins(keypad);
+ stmpe_keypad_fill_used_pins(keypad, rows, cols);
- keypad->stmpe = stmpe;
- keypad->plat = plat;
keypad->input = input;
- keypad->variant = &stmpe_keypad_variants[stmpe->partnum];
error = stmpe_keypad_chip_init(keypad);
if (error < 0)
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index d125a019383..d88d73d8355 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -881,6 +881,34 @@ static void alps_get_finger_coordinate_v7(struct input_mt_pos *mt,
unsigned char *pkt,
unsigned char pkt_id)
{
+ /*
+ * packet-fmt b7 b6 b5 b4 b3 b2 b1 b0
+ * Byte0 TWO & MULTI L 1 R M 1 Y0-2 Y0-1 Y0-0
+ * Byte0 NEW L 1 X1-5 1 1 Y0-2 Y0-1 Y0-0
+ * Byte1 Y0-10 Y0-9 Y0-8 Y0-7 Y0-6 Y0-5 Y0-4 Y0-3
+ * Byte2 X0-11 1 X0-10 X0-9 X0-8 X0-7 X0-6 X0-5
+ * Byte3 X1-11 1 X0-4 X0-3 1 X0-2 X0-1 X0-0
+ * Byte4 TWO X1-10 TWO X1-9 X1-8 X1-7 X1-6 X1-5 X1-4
+ * Byte4 MULTI X1-10 TWO X1-9 X1-8 X1-7 X1-6 Y1-5 1
+ * Byte4 NEW X1-10 TWO X1-9 X1-8 X1-7 X1-6 0 0
+ * Byte5 TWO & NEW Y1-10 0 Y1-9 Y1-8 Y1-7 Y1-6 Y1-5 Y1-4
+ * Byte5 MULTI Y1-10 0 Y1-9 Y1-8 Y1-7 Y1-6 F-1 F-0
+ * L: Left button
+ * R / M: Non-clickpads: Right / Middle button
+ * Clickpads: When > 2 fingers are down, and some fingers
+ * are in the button area, then the 2 coordinates reported
+ * are for fingers outside the button area and these report
+ * extra fingers being present in the right / left button
+ * area. Note these fingers are not added to the F field!
+ * so if a TWO packet is received and R = 1 then there are
+ * 3 fingers down, etc.
+ * TWO: 1: Two touches present, byte 0/4/5 are in TWO fmt
+ * 0: If byte 4 bit 0 is 1, then byte 0/4/5 are in MULTI fmt
+ * otherwise byte 0 bit 4 must be set and byte 0/4/5 are
+ * in NEW fmt
+ * F: Number of fingers - 3, 0 means 3 fingers, 1 means 4 ...
+ */
+
mt[0].x = ((pkt[2] & 0x80) << 4);
mt[0].x |= ((pkt[2] & 0x3F) << 5);
mt[0].x |= ((pkt[3] & 0x30) >> 1);
@@ -919,18 +947,21 @@ static void alps_get_finger_coordinate_v7(struct input_mt_pos *mt,
static int alps_get_mt_count(struct input_mt_pos *mt)
{
- int i;
+ int i, fingers = 0;
- for (i = 0; i < MAX_TOUCHES && mt[i].x != 0 && mt[i].y != 0; i++)
- /* empty */;
+ for (i = 0; i < MAX_TOUCHES; i++) {
+ if (mt[i].x != 0 || mt[i].y != 0)
+ fingers++;
+ }
- return i;
+ return fingers;
}
static int alps_decode_packet_v7(struct alps_fields *f,
unsigned char *p,
struct psmouse *psmouse)
{
+ struct alps_data *priv = psmouse->private;
unsigned char pkt_id;
pkt_id = alps_get_packet_id_v7(p);
@@ -938,19 +969,52 @@ static int alps_decode_packet_v7(struct alps_fields *f,
return 0;
if (pkt_id == V7_PACKET_ID_UNKNOWN)
return -1;
+ /*
+ * NEW packets are send to indicate a discontinuity in the finger
+ * coordinate reporting. Specifically a finger may have moved from
+ * slot 0 to 1 or vice versa. INPUT_MT_TRACK takes care of this for
+ * us.
+ *
+ * NEW packets have 3 problems:
+ * 1) They do not contain middle / right button info (on non clickpads)
+ * this can be worked around by preserving the old button state
+ * 2) They do not contain an accurate fingercount, and they are
+ * typically send when the number of fingers changes. We cannot use
+ * the old finger count as that may mismatch with the amount of
+ * touch coordinates we've available in the NEW packet
+ * 3) Their x data for the second touch is inaccurate leading to
+ * a possible jump of the x coordinate by 16 units when the first
+ * non NEW packet comes in
+ * Since problems 2 & 3 cannot be worked around, just ignore them.
+ */
+ if (pkt_id == V7_PACKET_ID_NEW)
+ return 1;
alps_get_finger_coordinate_v7(f->mt, p, pkt_id);
- if (pkt_id == V7_PACKET_ID_TWO || pkt_id == V7_PACKET_ID_MULTI) {
- f->left = (p[0] & 0x80) >> 7;
+ if (pkt_id == V7_PACKET_ID_TWO)
+ f->fingers = alps_get_mt_count(f->mt);
+ else /* pkt_id == V7_PACKET_ID_MULTI */
+ f->fingers = 3 + (p[5] & 0x03);
+
+ f->left = (p[0] & 0x80) >> 7;
+ if (priv->flags & ALPS_BUTTONPAD) {
+ if (p[0] & 0x20)
+ f->fingers++;
+ if (p[0] & 0x10)
+ f->fingers++;
+ } else {
f->right = (p[0] & 0x20) >> 5;
f->middle = (p[0] & 0x10) >> 4;
}
- if (pkt_id == V7_PACKET_ID_TWO)
- f->fingers = alps_get_mt_count(f->mt);
- else if (pkt_id == V7_PACKET_ID_MULTI)
- f->fingers = 3 + (p[5] & 0x03);
+ /* Sometimes a single touch is reported in mt[1] rather then mt[0] */
+ if (f->fingers == 1 && f->mt[0].x == 0 && f->mt[0].y == 0) {
+ f->mt[0].x = f->mt[1].x;
+ f->mt[0].y = f->mt[1].y;
+ f->mt[1].x = 0;
+ f->mt[1].y = 0;
+ }
return 0;
}
diff --git a/drivers/input/mouse/trackpoint.c b/drivers/input/mouse/trackpoint.c
index 30c8b699880..354d47ecd66 100644
--- a/drivers/input/mouse/trackpoint.c
+++ b/drivers/input/mouse/trackpoint.c
@@ -227,6 +227,7 @@ TRACKPOINT_INT_ATTR(thresh, TP_THRESH, TP_DEF_THRESH);
TRACKPOINT_INT_ATTR(upthresh, TP_UP_THRESH, TP_DEF_UP_THRESH);
TRACKPOINT_INT_ATTR(ztime, TP_Z_TIME, TP_DEF_Z_TIME);
TRACKPOINT_INT_ATTR(jenks, TP_JENKS_CURV, TP_DEF_JENKS_CURV);
+TRACKPOINT_INT_ATTR(drift_time, TP_DRIFT_TIME, TP_DEF_DRIFT_TIME);
TRACKPOINT_BIT_ATTR(press_to_select, TP_TOGGLE_PTSON, TP_MASK_PTSON, 0,
TP_DEF_PTSON);
@@ -246,6 +247,7 @@ static struct attribute *trackpoint_attrs[] = {
&psmouse_attr_upthresh.dattr.attr,
&psmouse_attr_ztime.dattr.attr,
&psmouse_attr_jenks.dattr.attr,
+ &psmouse_attr_drift_time.dattr.attr,
&psmouse_attr_press_to_select.dattr.attr,
&psmouse_attr_skipback.dattr.attr,
&psmouse_attr_ext_dev.dattr.attr,
@@ -312,6 +314,7 @@ static int trackpoint_sync(struct psmouse *psmouse, bool in_power_on_state)
TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, upthresh);
TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, ztime);
TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, jenks);
+ TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, drift_time);
/* toggles */
TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, press_to_select);
@@ -332,6 +335,7 @@ static void trackpoint_defaults(struct trackpoint_data *tp)
TRACKPOINT_SET_POWER_ON_DEFAULT(tp, upthresh);
TRACKPOINT_SET_POWER_ON_DEFAULT(tp, ztime);
TRACKPOINT_SET_POWER_ON_DEFAULT(tp, jenks);
+ TRACKPOINT_SET_POWER_ON_DEFAULT(tp, drift_time);
TRACKPOINT_SET_POWER_ON_DEFAULT(tp, inertia);
/* toggles */
diff --git a/drivers/input/mouse/trackpoint.h b/drivers/input/mouse/trackpoint.h
index ecd0547964a..5617ed3a7d7 100644
--- a/drivers/input/mouse/trackpoint.h
+++ b/drivers/input/mouse/trackpoint.h
@@ -70,6 +70,9 @@
#define TP_UP_THRESH 0x5A /* Used to generate a 'click' on Z-axis */
#define TP_Z_TIME 0x5E /* How sharp of a press */
#define TP_JENKS_CURV 0x5D /* Minimum curvature for double click */
+#define TP_DRIFT_TIME 0x5F /* How long a 'hands off' condition */
+ /* must last (x*107ms) for drift */
+ /* correction to occur */
/*
* Toggling Flag bits
@@ -120,6 +123,7 @@
#define TP_DEF_UP_THRESH 0xFF
#define TP_DEF_Z_TIME 0x26
#define TP_DEF_JENKS_CURV 0x87
+#define TP_DEF_DRIFT_TIME 0x05
/* Toggles */
#define TP_DEF_MB 0x00
@@ -137,6 +141,7 @@ struct trackpoint_data
unsigned char draghys, mindrag;
unsigned char thresh, upthresh;
unsigned char ztime, jenks;
+ unsigned char drift_time;
/* toggles */
unsigned char press_to_select;
diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index 2e4d90919f4..dcc68efd0d7 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -850,9 +850,11 @@ static int edt_ft5x06_ts_identify(struct i2c_client *client,
}
#define EDT_ATTR_CHECKSET(name, reg) \
+do { \
if (pdata->name >= edt_ft5x06_attr_##name.limit_low && \
pdata->name <= edt_ft5x06_attr_##name.limit_high) \
- edt_ft5x06_register_write(tsdata, reg, pdata->name)
+ edt_ft5x06_register_write(tsdata, reg, pdata->name); \
+} while (0)
#define EDT_GET_PROP(name, reg) { \
u32 val; \
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index 02a17c388e8..2d29d17518c 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -519,6 +519,7 @@ static const u8 stmpe1601_regs[] = {
[STMPE_IDX_GPDR_LSB] = STMPE1601_REG_GPIO_SET_DIR_LSB,
[STMPE_IDX_GPRER_LSB] = STMPE1601_REG_GPIO_RE_LSB,
[STMPE_IDX_GPFER_LSB] = STMPE1601_REG_GPIO_FE_LSB,
+ [STMPE_IDX_GPPUR_LSB] = STMPE1601_REG_GPIO_PU_LSB,
[STMPE_IDX_GPAFR_U_MSB] = STMPE1601_REG_GPIO_AF_U_MSB,
[STMPE_IDX_IEGPIOR_LSB] = STMPE1601_REG_INT_EN_GPIO_MASK_LSB,
[STMPE_IDX_ISGPIOR_MSB] = STMPE1601_REG_INT_STA_GPIO_MSB,
@@ -667,6 +668,7 @@ static const u8 stmpe1801_regs[] = {
[STMPE_IDX_GPDR_LSB] = STMPE1801_REG_GPIO_SET_DIR_LOW,
[STMPE_IDX_GPRER_LSB] = STMPE1801_REG_GPIO_RE_LOW,
[STMPE_IDX_GPFER_LSB] = STMPE1801_REG_GPIO_FE_LOW,
+ [STMPE_IDX_GPPUR_LSB] = STMPE1801_REG_GPIO_PULL_UP_LOW,
[STMPE_IDX_IEGPIOR_LSB] = STMPE1801_REG_INT_EN_GPIO_MASK_LOW,
[STMPE_IDX_ISGPIOR_LSB] = STMPE1801_REG_INT_STA_GPIO_LOW,
};
@@ -750,6 +752,8 @@ static const u8 stmpe24xx_regs[] = {
[STMPE_IDX_GPDR_LSB] = STMPE24XX_REG_GPDR_LSB,
[STMPE_IDX_GPRER_LSB] = STMPE24XX_REG_GPRER_LSB,
[STMPE_IDX_GPFER_LSB] = STMPE24XX_REG_GPFER_LSB,
+ [STMPE_IDX_GPPUR_LSB] = STMPE24XX_REG_GPPUR_LSB,
+ [STMPE_IDX_GPPDR_LSB] = STMPE24XX_REG_GPPDR_LSB,
[STMPE_IDX_GPAFR_U_MSB] = STMPE24XX_REG_GPAFR_U_MSB,
[STMPE_IDX_IEGPIOR_LSB] = STMPE24XX_REG_IEGPIOR_LSB,
[STMPE_IDX_ISGPIOR_MSB] = STMPE24XX_REG_ISGPIOR_MSB,
diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h
index 2d045f26f19..e00710b6393 100644
--- a/drivers/mfd/stmpe.h
+++ b/drivers/mfd/stmpe.h
@@ -188,6 +188,7 @@ int stmpe_remove(struct stmpe *stmpe);
#define STMPE1601_REG_GPIO_ED_MSB 0x8A
#define STMPE1601_REG_GPIO_RE_LSB 0x8D
#define STMPE1601_REG_GPIO_FE_LSB 0x8F
+#define STMPE1601_REG_GPIO_PU_LSB 0x91
#define STMPE1601_REG_GPIO_AF_U_MSB 0x92
#define STMPE1601_SYS_CTRL_ENABLE_GPIO (1 << 3)
@@ -276,6 +277,8 @@ int stmpe_remove(struct stmpe *stmpe);
#define STMPE24XX_REG_GPEDR_MSB 0x8C
#define STMPE24XX_REG_GPRER_LSB 0x91
#define STMPE24XX_REG_GPFER_LSB 0x94
+#define STMPE24XX_REG_GPPUR_LSB 0x97
+#define STMPE24XX_REG_GPPDR_LSB 0x9a
#define STMPE24XX_REG_GPAFR_U_MSB 0x9B
#define STMPE24XX_SYS_CTRL_ENABLE_GPIO (1 << 3)
diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h
index 575a86c7fcb..f742b6717d5 100644
--- a/include/linux/mfd/stmpe.h
+++ b/include/linux/mfd/stmpe.h
@@ -50,6 +50,8 @@ enum {
STMPE_IDX_GPEDR_MSB,
STMPE_IDX_GPRER_LSB,
STMPE_IDX_GPFER_LSB,
+ STMPE_IDX_GPPUR_LSB,
+ STMPE_IDX_GPPDR_LSB,
STMPE_IDX_GPAFR_U_MSB,
STMPE_IDX_IEGPIOR_LSB,
STMPE_IDX_ISGPIOR_LSB,
@@ -113,24 +115,6 @@ extern int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins,
extern int stmpe_enable(struct stmpe *stmpe, unsigned int blocks);
extern int stmpe_disable(struct stmpe *stmpe, unsigned int blocks);
-struct matrix_keymap_data;
-
-/**
- * struct stmpe_keypad_platform_data - STMPE keypad platform data
- * @keymap_data: key map table and size
- * @debounce_ms: debounce interval, in ms. Maximum is
- * %STMPE_KEYPAD_MAX_DEBOUNCE.
- * @scan_count: number of key scanning cycles to confirm key data.
- * Maximum is %STMPE_KEYPAD_MAX_SCAN_COUNT.
- * @no_autorepeat: disable key autorepeat
- */
-struct stmpe_keypad_platform_data {
- const struct matrix_keymap_data *keymap_data;
- unsigned int debounce_ms;
- unsigned int scan_count;
- bool no_autorepeat;
-};
-
#define STMPE_GPIO_NOREQ_811_TOUCH (0xf0)
/**
@@ -199,7 +183,6 @@ struct stmpe_ts_platform_data {
* @irq_gpio: gpio number over which irq will be requested (significant only if
* irq_over_gpio is true)
* @gpio: GPIO-specific platform data
- * @keypad: keypad-specific platform data
* @ts: touchscreen-specific platform data
*/
struct stmpe_platform_data {
@@ -212,7 +195,6 @@ struct stmpe_platform_data {
int autosleep_timeout;
struct stmpe_gpio_platform_data *gpio;
- struct stmpe_keypad_platform_data *keypad;
struct stmpe_ts_platform_data *ts;
};
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-27 13:13:48 +0000