diff options
-rw-r--r-- | arch/arm/Kconfig | 11 | ||||
-rw-r--r-- | arch/arm/Makefile | 2 | ||||
-rw-r--r-- | arch/arm/mach-tcc8k/Kconfig | 5 | ||||
-rw-r--r-- | arch/arm/plat-tcc/Kconfig | 20 | ||||
-rw-r--r-- | arch/arm/plat-tcc/Makefile | 3 | ||||
-rw-r--r-- | arch/arm/plat-tcc/include/mach/debug-macro.S | 33 | ||||
-rw-r--r-- | arch/arm/plat-tcc/include/mach/entry-macro.S | 68 | ||||
-rw-r--r-- | arch/arm/plat-tcc/include/mach/hardware.h | 43 | ||||
-rw-r--r-- | arch/arm/plat-tcc/include/mach/memory.h | 18 | ||||
-rw-r--r-- | arch/arm/plat-tcc/include/mach/system.h | 31 | ||||
-rw-r--r-- | arch/arm/plat-tcc/include/mach/tcc8k-regs.h | 796 | ||||
-rw-r--r-- | arch/arm/plat-tcc/include/mach/uncompress.h | 34 | ||||
-rw-r--r-- | arch/arm/plat-tcc/include/mach/vmalloc.h | 10 | ||||
-rw-r--r-- | arch/arm/plat-tcc/system.c | 25 |
14 files changed, 1099 insertions, 0 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 553b7cf17bf..8d395352f1c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -748,6 +748,15 @@ config ARCH_SHARK Support for the StrongARM based Digital DNARD machine, also known as "Shark" (<http://www.shark-linux.de/shark.html>). +config ARCH_TCC_926 + bool "Telechips TCC ARM926-based systems" + select CPU_ARM926T + select HAVE_CLK + select COMMON_CLKDEV + select GENERIC_CLOCKEVENTS + help + Support for Telechips TCC ARM926-based systems. + config ARCH_LH7A40X bool "Sharp LH7A40X" select CPU_ARM922T @@ -916,6 +925,8 @@ source "arch/arm/plat-s5p/Kconfig" source "arch/arm/plat-spear/Kconfig" +source "arch/arm/plat-tcc/Kconfig" + if ARCH_S3C2410 source "arch/arm/mach-s3c2400/Kconfig" source "arch/arm/mach-s3c2410/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 59c1ce858fc..4e0b6c8d7ed 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -183,6 +183,7 @@ machine-$(CONFIG_ARCH_SHARK) := shark machine-$(CONFIG_ARCH_SHMOBILE) := shmobile machine-$(CONFIG_ARCH_STMP378X) := stmp378x machine-$(CONFIG_ARCH_STMP37XX) := stmp37xx +machine-$(CONFIG_ARCH_TCC8K) := tcc8k machine-$(CONFIG_ARCH_TEGRA) := tegra machine-$(CONFIG_ARCH_U300) := u300 machine-$(CONFIG_ARCH_U8500) := ux500 @@ -202,6 +203,7 @@ plat-$(CONFIG_ARCH_MXC) := mxc plat-$(CONFIG_ARCH_OMAP) := omap plat-$(CONFIG_ARCH_S3C64XX) := samsung plat-$(CONFIG_ARCH_STMP3XXX) := stmp3xxx +plat-$(CONFIG_ARCH_TCC_926) := tcc plat-$(CONFIG_PLAT_IOP) := iop plat-$(CONFIG_PLAT_NOMADIK) := nomadik plat-$(CONFIG_PLAT_ORION) := orion diff --git a/arch/arm/mach-tcc8k/Kconfig b/arch/arm/mach-tcc8k/Kconfig new file mode 100644 index 00000000000..ec7f71b17c0 --- /dev/null +++ b/arch/arm/mach-tcc8k/Kconfig @@ -0,0 +1,5 @@ +if ARCH_TCC8K + +comment "TCC8000 systems:" + +endif diff --git a/arch/arm/plat-tcc/Kconfig b/arch/arm/plat-tcc/Kconfig new file mode 100644 index 00000000000..1bf499570f4 --- /dev/null +++ b/arch/arm/plat-tcc/Kconfig @@ -0,0 +1,20 @@ +if ARCH_TCC_926 + +menu "Telechips ARM926-based CPUs" + +choice + prompt "Telechips CPU type:" + default ARCH_TCC8K + +config ARCH_TCC8K + bool TCC8000 + select USB_ARCH_HAS_OHCI + help + Support for Telechips TCC8000 systems + +endchoice + +source "arch/arm/mach-tcc8k/Kconfig" + +endmenu +endif diff --git a/arch/arm/plat-tcc/Makefile b/arch/arm/plat-tcc/Makefile new file mode 100644 index 00000000000..3f2e4fe70d5 --- /dev/null +++ b/arch/arm/plat-tcc/Makefile @@ -0,0 +1,3 @@ +# "Telechips Platform Common Modules" + +obj-y := system.o diff --git a/arch/arm/plat-tcc/include/mach/debug-macro.S b/arch/arm/plat-tcc/include/mach/debug-macro.S new file mode 100644 index 00000000000..97537845df6 --- /dev/null +++ b/arch/arm/plat-tcc/include/mach/debug-macro.S @@ -0,0 +1,33 @@ +/* + * Copyright (C) 1994-1999 Russell King + * Copyright (C) 2008-2009 Telechips + * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + + .macro addruart,rx,tmp + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + moveq \rx, #0x90000000 @ physical base address + movne \rx, #0xF1000000 @ virtual base + orr \rx, \rx, #0x00007000 @ UART0 + .endm + + .macro senduart,rd,rx + strb \rd, [\rx, #0x44] + .endm + + .macro waituart,rd,rx + .endm + + .macro busyuart,rd,rx +1001: + ldr \rd, [\rx, #0x14] + tst \rd, #0x20 + + beq 1001b + .endm diff --git a/arch/arm/plat-tcc/include/mach/entry-macro.S b/arch/arm/plat-tcc/include/mach/entry-macro.S new file mode 100644 index 00000000000..748f401e4b6 --- /dev/null +++ b/arch/arm/plat-tcc/include/mach/entry-macro.S @@ -0,0 +1,68 @@ +/* + * include/asm-arm/arch-tcc83x/entry-macro.S + * + * Author : <linux@telechips.com> + * Created: June 10, 2008 + * Description: Low-level IRQ helper macros for Telechips-based platforms + * + * Copyright (C) 2008-2009 Telechips + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <mach/hardware.h> +#include <mach/irqs.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + + ldr \base, =0xF2003000 @ base address of PIC registers + + @@ read MREQ register of PIC0 + + mov \irqnr, #0 + ldr \irqstat, [\base, #0x00000014 ] @ lower 32 interrupts + cmp \irqstat, #0 + bne 1001f + + @@ read MREQ register of PIC1 + + ldr \irqstat, [\base, #0x00000094] @ upper 32 interrupts + cmp \irqstat, #0 + beq 1002f + mov \irqnr, #0x20 + +1001: + movs \tmp, \irqstat, lsl #16 + movne \irqstat, \tmp + addeq \irqnr, \irqnr, #16 + + movs \tmp, \irqstat, lsl #8 + movne \irqstat, \tmp + addeq \irqnr, \irqnr, #8 + + movs \tmp, \irqstat, lsl #4 + movne \irqstat, \tmp + addeq \irqnr, \irqnr, #4 + + movs \tmp, \irqstat, lsl #2 + movne \irqstat, \tmp + addeq \irqnr, \irqnr, #2 + + movs \tmp, \irqstat, lsl #1 + addeq \irqnr, \irqnr, #1 + orrs \base, \base, #1 +1002: + @@ exit here, Z flag unset if IRQ + + .endm diff --git a/arch/arm/plat-tcc/include/mach/hardware.h b/arch/arm/plat-tcc/include/mach/hardware.h new file mode 100644 index 00000000000..e70d126ccaf --- /dev/null +++ b/arch/arm/plat-tcc/include/mach/hardware.h @@ -0,0 +1,43 @@ +/* + * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com> + * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com> + * and Dirk Behme <dirk.behme@de.bosch.com> + * Rewritten by: <linux@telechips.com> + * Description: Hardware definitions for TCC8300 processors and boards + * + * Copyright (C) 2001 RidgeRun, Inc. + * Copyright (C) 2008-2009 Telechips + * + * Modifications for mainline (C) 2009 Hans J. Koch <hjk@linutronix.de> + * + * Licensed under the terms of the GNU Pulic License version 2. + */ + +#ifndef __ASM_ARCH_TCC_HARDWARE_H +#define __ASM_ARCH_TCC_HARDWARE_H + +#include <asm/sizes.h> +#ifndef __ASSEMBLER__ +#include <asm/types.h> +#endif +#include <mach/io.h> + +/* + * ---------------------------------------------------------------------------- + * Clocks + * ---------------------------------------------------------------------------- + */ +#define CLKGEN_REG_BASE 0xfffece00 +#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0) +#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4) +#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8) +#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC) +#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10) +#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14) +#define ARM_SYSST (CLKGEN_REG_BASE + 0x18) +#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) + +/* DPLL control registers */ +#define DPLL_CTL 0xfffecf00 + +#endif /* __ASM_ARCH_TCC_HARDWARE_H */ diff --git a/arch/arm/plat-tcc/include/mach/memory.h b/arch/arm/plat-tcc/include/mach/memory.h new file mode 100644 index 00000000000..cd91ba8a670 --- /dev/null +++ b/arch/arm/plat-tcc/include/mach/memory.h @@ -0,0 +1,18 @@ +/* + * Copyright (C) 1999 ARM Limited + * Copyright (C) 2000 RidgeRun, Inc. + * Copyright (C) 2008-2009 Telechips + * Copyright (C) 2010 Hans J. Koch <hjk@linutronix.de> + * + * Licensed under the terms of the GPL v2. + */ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +/* + * Physical DRAM offset. + */ +#define PHYS_OFFSET UL(0x20000000) + +#endif diff --git a/arch/arm/plat-tcc/include/mach/system.h b/arch/arm/plat-tcc/include/mach/system.h new file mode 100644 index 00000000000..909e6035d84 --- /dev/null +++ b/arch/arm/plat-tcc/include/mach/system.h @@ -0,0 +1,31 @@ +/* + * Author: <linux@telechips.com> + * Created: June 10, 2008 + * Description: LINUX SYSTEM FUNCTIONS for TCC83x + * + * Copyright (C) 2008-2009 Telechips + * + * Licensed under the terms of the GPL v2. + * + */ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H +#include <linux/clk.h> + +#include <asm/mach-types.h> +#include <mach/hardware.h> + +extern void plat_tcc_reboot(void); + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +static inline void arch_reset(char mode, const char *cmd) +{ + plat_tcc_reboot(); +} + +#endif diff --git a/arch/arm/plat-tcc/include/mach/tcc8k-regs.h b/arch/arm/plat-tcc/include/mach/tcc8k-regs.h new file mode 100644 index 00000000000..f3243ebea46 --- /dev/null +++ b/arch/arm/plat-tcc/include/mach/tcc8k-regs.h @@ -0,0 +1,796 @@ +/* + * Telechips TCC8000 register definitions + * + * (C) 2009 Hans J. Koch <hjk@linutronix.de> + * + * Licensed under the terms of the GPLv2. + */ + +#ifndef TCC8K_REGS_H +#define TCC8K_REGS_H + +#include <linux/types.h> + +#define EXT_SDRAM_BASE 0x20000000 +#define INT_SRAM_BASE 0x30000000 +#define INT_SRAM_SIZE SZ_32K +#define CS0_BASE 0x40000000 +#define CS1_BASE 0x50000000 +#define CS1_SIZE SZ_64K +#define CS2_BASE 0x60000000 +#define CS3_BASE 0x70000000 +#define AHB_PERI_BASE 0x80000000 +#define AHB_PERI_SIZE SZ_64K +#define APB0_PERI_BASE 0x90000000 +#define APB0_PERI_SIZE SZ_128K +#define APB1_PERI_BASE 0x98000000 +#define APB1_PERI_SIZE SZ_128K +#define DATA_TCM_BASE 0xa0000000 +#define DATA_TCM_SIZE SZ_8K +#define EXT_MEM_CTRL_BASE 0xf0000000 +#define EXT_MEM_CTRL_SIZE SZ_4K + +#define CS1_BASE_VIRT 0xf7000000 +#define AHB_PERI_BASE_VIRT 0xf4000000 +#define APB0_PERI_BASE_VIRT 0xf1000000 +#define APB1_PERI_BASE_VIRT 0xf2000000 +#define EXT_MEM_CTRL_BASE_VIRT 0xf3000000 +#define INT_SRAM_BASE_VIRT 0xf5000000 +#define DATA_TCM_BASE_VIRT 0xf6000000 + +#define __REG(x) (*((volatile u32 *)(x))) + +/* USB Device Controller Registers */ +#define UDC_BASE (AHB_PERI_BASE_VIRT + 0x8000) +#define UDC_BASE_PHYS (AHB_PERI_BASE + 0x8000) + +#define UDC_IR_OFFS 0x00 +#define UDC_EIR_OFFS 0x04 +#define UDC_EIER_OFFS 0x08 +#define UDC_FAR_OFFS 0x0c +#define UDC_FNR_OFFS 0x10 +#define UDC_EDR_OFFS 0x14 +#define UDC_RT_OFFS 0x18 +#define UDC_SSR_OFFS 0x1c +#define UDC_SCR_OFFS 0x20 +#define UDC_EP0SR_OFFS 0x24 +#define UDC_EP0CR_OFFS 0x28 + +#define UDC_ESR_OFFS 0x2c +#define UDC_ECR_OFFS 0x30 +#define UDC_BRCR_OFFS 0x34 +#define UDC_BWCR_OFFS 0x38 +#define UDC_MPR_OFFS 0x3c +#define UDC_DCR_OFFS 0x40 +#define UDC_DTCR_OFFS 0x44 +#define UDC_DFCR_OFFS 0x48 +#define UDC_DTTCR1_OFFS 0x4c +#define UDC_DTTCR2_OFFS 0x50 +#define UDC_ESR2_OFFS 0x54 + +#define UDC_SCR2_OFFS 0x58 +#define UDC_EP0BUF_OFFS 0x60 +#define UDC_EP1BUF_OFFS 0x64 +#define UDC_EP2BUF_OFFS 0x68 +#define UDC_EP3BUF_OFFS 0x6c +#define UDC_PLICR_OFFS 0xa0 +#define UDC_PCR_OFFS 0xa4 + +#define UDC_UPCR0_OFFS 0xc8 +#define UDC_UPCR1_OFFS 0xcc +#define UDC_UPCR2_OFFS 0xd0 +#define UDC_UPCR3_OFFS 0xd4 + +/* Bits in UDC_EIR */ +#define UDC_EIR_EP0I (1 << 0) +#define UDC_EIR_EP1I (1 << 1) +#define UDC_EIR_EP2I (1 << 2) +#define UDC_EIR_EP3I (1 << 3) +#define UDC_EIR_EPI_MASK 0x0f + +/* Bits in UDC_EIER */ +#define UDC_EIER_EP0IE (1 << 0) +#define UDC_EIER_EP1IE (1 << 1) +#define UDC_EIER_EP2IE (1 << 2) +#define UDC_EIER_EP3IE (1 << 3) + +/* Bits in UDC_FNR */ +#define UDC_FNR_FN_MASK 0x7ff +#define UDC_FNR_SM (1 << 13) +#define UDC_FNR_FTL (1 << 14) + +/* Bits in UDC_SSR */ +#define UDC_SSR_HFRES (1 << 0) +#define UDC_SSR_HFSUSP (1 << 1) +#define UDC_SSR_HFRM (1 << 2) +#define UDC_SSR_SDE (1 << 3) +#define UDC_SSR_HSP (1 << 4) +#define UDC_SSR_DM (1 << 5) +#define UDC_SSR_DP (1 << 6) +#define UDC_SSR_TBM (1 << 7) +#define UDC_SSR_VBON (1 << 8) +#define UDC_SSR_VBOFF (1 << 9) +#define UDC_SSR_EOERR (1 << 10) +#define UDC_SSR_DCERR (1 << 11) +#define UDC_SSR_TCERR (1 << 12) +#define UDC_SSR_BSERR (1 << 13) +#define UDC_SSR_TMERR (1 << 14) +#define UDC_SSR_BAERR (1 << 15) + +/* Bits in UDC_SCR */ +#define UDC_SCR_HRESE (1 << 0) +#define UDC_SCR_HSSPE (1 << 1) +#define UDC_SCR_RRDE (1 << 5) +#define UDC_SCR_SPDEN (1 << 6) +#define UDC_SCR_DIEN (1 << 12) + +/* Bits in UDC_EP0SR */ +#define UDC_EP0SR_RSR (1 << 0) +#define UDC_EP0SR_TST (1 << 1) +#define UDC_EP0SR_SHT (1 << 4) +#define UDC_EP0SR_LWO (1 << 6) + +/* Bits in UDC_EP0CR */ +#define UDC_EP0CR_ESS (1 << 1) + +/* Bits in UDC_ESR */ +#define UDC_ESR_RPS (1 << 0) +#define UDC_ESR_TPS (1 << 1) +#define UDC_ESR_LWO (1 << 4) +#define UDC_ESR_FFS (1 << 6) + +/* Bits in UDC_ECR */ +#define UDC_ECR_ESS (1 << 1) +#define UDC_ECR_CDP (1 << 2) + +#define UDC_ECR_FLUSH (1 << 6) +#define UDC_ECR_DUEN (1 << 7) + +/* Bits in UDC_UPCR0 */ +#define UDC_UPCR0_VBD (1 << 1) +#define UDC_UPCR0_VBDS (1 << 6) +#define UDC_UPCR0_RCD_12 (0x0 << 9) +#define UDC_UPCR0_RCD_24 (0x1 << 9) +#define UDC_UPCR0_RCD_48 (0x2 << 9) +#define UDC_UPCR0_RCS_EXT (0x1 << 11) +#define UDC_UPCR0_RCS_XTAL (0x0 << 11) + +/* Bits in UDC_UPCR1 */ +#define UDC_UPCR1_CDT(x) ((x) << 0) +#define UDC_UPCR1_OTGT(x) ((x) << 3) +#define UDC_UPCR1_SQRXT(x) ((x) << 8) +#define UDC_UPCR1_TXFSLST(x) ((x) << 12) + +/* Bits in UDC_UPCR2 */ +#define UDC_UPCR2_TP (1 << 0) +#define UDC_UPCR2_TXRT(x) ((x) << 2) +#define UDC_UPCR2_TXVRT(x) ((x) << 5) +#define UDC_UPCR2_OPMODE(x) ((x) << 9) +#define UDC_UPCR2_XCVRSEL(x) ((x) << 12) +#define UDC_UPCR2_TM (1 << 14) + +/* USB Host Controller registers */ +#define USBH0_BASE (AHB_PERI_BASE_VIRT + 0xb000) +#define USBH1_BASE (AHB_PERI_BASE_VIRT + 0xb800) + +#define OHCI_INT_ENABLE_OFFS 0x10 + +#define RH_DESCRIPTOR_A_OFFS 0x48 +#define RH_DESCRIPTOR_B_OFFS 0x4c + +#define USBHTCFG0_OFFS 0x100 +#define USBHHCFG0_OFFS 0x104 +#define USBHHCFG1_OFFS 0x104 + +/* DMA controller registers */ +#define DMAC0_BASE (AHB_PERI_BASE + 0x4000) +#define DMAC1_BASE (AHB_PERI_BASE + 0xa000) +#define DMAC2_BASE (AHB_PERI_BASE + 0x4800) +#define DMAC3_BASE (AHB_PERI_BASE + 0xa800) + +#define DMAC_CH_OFFSET(ch) (ch * 0x30) + +#define ST_SADR_OFFS 0x00 +#define SPARAM_OFFS 0x04 +#define C_SADR_OFFS 0x0c +#define ST_DADR_OFFS 0x10 +#define DPARAM_OFFS 0x14 +#define C_DADR_OFFS 0x1c +#define HCOUNT_OFFS 0x20 +#define CHCTRL_OFFS 0x24 +#define RPTCTRL_OFFS 0x28 +#define EXTREQ_A_OFFS 0x2c + +/* Bits in CHCTRL register */ +#define CHCTRL_EN (1 << 0) + +#define CHCTRL_IEN (1 << 2) +#define CHCTRL_FLAG (1 << 3) +#define CHCTRL_WSIZE8 (0 << 4) +#define CHCTRL_WSIZE16 (1 << 4) +#define CHCTRL_WSIZE32 (2 << 4) + +#define CHCTRL_BSIZE1 (0 << 6) +#define CHCTRL_BSIZE2 (1 << 6) +#define CHCTRL_BSIZE4 (2 << 6) +#define CHCTRL_BSIZE8 (3 << 6) + +#define CHCTRL_TYPE_SINGLE_E (0 << 8) +#define CHCTRL_TYPE_HW (1 << 8) +#define CHCTRL_TYPE_SW (2 << 8) +#define CHCTRL_TYPE_SINGLE_L (3 << 8) + +#define CHCTRL_BST (1 << 10) + +/* Use DMA controller 0, channel 2 for USB */ +#define USB_DMA_BASE (DMAC0_BASE + DMAC_CH_OFFSET(2)) + +/* NAND flash controller registers */ +#define NFC_BASE (AHB_PERI_BASE_VIRT + 0xd000) +#define NFC_BASE_PHYS (AHB_PERI_BASE + 0xd000) + +#define NFC_CMD_OFFS 0x00 +#define NFC_LADDR_OFFS 0x04 +#define NFC_BADDR_OFFS 0x08 +#define NFC_SADDR_OFFS 0x0c +#define NFC_WDATA_OFFS 0x10 +#define NFC_LDATA_OFFS 0x20 +#define NFC_SDATA_OFFS 0x40 +#define NFC_CTRL_OFFS 0x50 +#define NFC_PSTART_OFFS 0x54 +#define NFC_RSTART_OFFS 0x58 +#define NFC_DSIZE_OFFS 0x5c +#define NFC_IREQ_OFFS 0x60 +#define NFC_RST_OFFS 0x64 +#define NFC_CTRL1_OFFS 0x68 +#define NFC_MDATA_OFFS 0x70 + +#define NFC_WDATA_PHYS_ADDR (NFC_BASE_PHYS + NFC_WDATA_OFFS) + +/* Bits in NFC_CTRL */ +#define NFC_CTRL_BHLD_MASK (0xf << 0) +#define NFC_CTRL_BPW_MASK (0xf << 4) +#define NFC_CTRL_BSTP_MASK (0xf << 8) +#define NFC_CTRL_CADDR_MASK (0x7 << 12) +#define NFC_CTRL_CADDR_1 (0x0 << 12) +#define NFC_CTRL_CADDR_2 (0x1 << 12) +#define NFC_CTRL_CADDR_3 (0x2 << 12) +#define NFC_CTRL_CADDR_4 (0x3 << 12) +#define NFC_CTRL_CADDR_5 (0x4 << 12) +#define NFC_CTRL_MSK (1 << 15) +#define NFC_CTRL_PSIZE256 (0 << 16) +#define NFC_CTRL_PSIZE512 (1 << 16) +#define NFC_CTRL_PSIZE1024 (2 << 16) +#define NFC_CTRL_PSIZE2048 (3 << 16) +#define NFC_CTRL_PSIZE4096 (4 << 16) +#define NFC_CTRL_PSIZE_MASK (7 << 16) +#define NFC_CTRL_BSIZE1 (0 << 19) +#define NFC_CTRL_BSIZE2 (1 << 19) +#define NFC_CTRL_BSIZE4 (2 << 19) +#define NFC_CTRL_BSIZE8 (3 << 19) +#define NFC_CTRL_BSIZE_MASK (3 << 19) +#define NFC_CTRL_RDY (1 << 21) +#define NFC_CTRL_CS0SEL (1 << 22) +#define NFC_CTRL_CS1SEL (1 << 23) +#define NFC_CTRL_CS2SEL (1 << 24) +#define NFC_CTRL_CS3SEL (1 << 25) +#define NFC_CTRL_CSMASK (0xf << 22) +#define NFC_CTRL_BW (1 << 26) +#define NFC_CTRL_FS (1 << 27) +#define NFC_CTRL_DEN (1 << 28) +#define NFC_CTRL_READ_IEN (1 << 29) +#define NFC_CTRL_PROG_IEN (1 << 30) +#define NFC_CTRL_RDY_IEN (1 << 31) + +/* Bits in NFC_IREQ */ +#define NFC_IREQ_IRQ0 (1 << 0) +#define NFC_IREQ_IRQ1 (1 << 1) +#define NFC_IREQ_IRQ2 (1 << 2) + +#define NFC_IREQ_FLAG0 (1 << 4) +#define NFC_IREQ_FLAG1 (1 << 5) +#define NFC_IREQ_FLAG2 (1 << 6) + +/* MMC controller registers */ +#define MMC0_BASE (AHB_PERI_BASE_VIRT + 0xe000) +#define MMC1_BASE (AHB_PERI_BASE_VIRT + 0xe800) + +/* UART base addresses */ + +#define UART0_BASE (APB0_PERI_BASE_VIRT + 0x07000) +#define UART0_BASE_PHYS (APB0_PERI_BASE + 0x07000) +#define UART1_BASE (APB0_PERI_BASE_VIRT + 0x08000) +#define UART1_BASE_PHYS (APB0_PERI_BASE + 0x08000) +#define UART2_BASE (APB0_PERI_BASE_VIRT + 0x09000) +#define UART2_BASE_PHYS (APB0_PERI_BASE + 0x09000) +#define UART3_BASE (APB0_PERI_BASE_VIRT + 0x0a000) +#define UART3_BASE_PHYS (APB0_PERI_BASE + 0x0a000) +#define UART4_BASE (APB0_PERI_BASE_VIRT + 0x15000) +#define UART4_BASE_PHYS (APB0_PERI_BASE + 0x15000) + +#define UART_BASE UART0_BASE +#define UART_BASE_PHYS UART0_BASE_PHYS + +/* ECC controller */ +#define ECC_CTR_BASE (APB0_PERI_BASE_VIRT + 0xd000) + +#define ECC_CTRL_OFFS 0x00 +#define ECC_BASE_OFFS 0x04 +#define ECC_MASK_OFFS 0x08 +#define ECC_CLEAR_OFFS 0x0c +#define ECC4_0_OFFS 0x10 +#define ECC4_1_OFFS 0x14 + +#define ECC_EADDR0_OFFS 0x50 + +#define ECC_ERRNUM_OFFS 0x90 +#define ECC_IREQ_OFFS 0x94 + +/* Bits in ECC_CTRL */ +#define ECC_CTRL_ECC4_DIEN (1 << 28) +#define ECC_CTRL_ECC8_DIEN (1 << 29) +#define ECC_CTRL_ECC12_DIEN (1 << 30) +#define ECC_CTRL_ECC_DISABLE 0x0 +#define ECC_CTRL_ECC_SLC_ENC 0x8 +#define ECC_CTRL_ECC_SLC_DEC 0x9 +#define ECC_CTRL_ECC4_ENC 0xa +#define ECC_CTRL_ECC4_DEC 0xb +#define ECC_CTRL_ECC8_ENC 0xc +#define ECC_CTRL_ECC8_DEC 0xd +#define ECC_CTRL_ECC12_ENC 0xe +#define ECC_CTRL_ECC12_DEC 0xf + +/* Bits in ECC_IREQ */ +#define ECC_IREQ_E4DI (1 << 4) + +#define ECC_IREQ_E4DF (1 << 20) +#define ECC_IREQ_E4EF (1 << 21) + +/* Interrupt controller */ + +#define PIC0_BASE (APB1_PERI_BASE_VIRT + 0x3000) +#define PIC0_BASE_PHYS (APB1_PERI_BASE + 0x3000) + +#define PIC0_IEN_OFFS 0x00 +#define PIC0_CREQ_OFFS 0x04 +#define PIC0_IREQ_OFFS 0x08 +#define PIC0_IRQSEL_OFFS 0x0c +#define PIC0_SRC_OFFS 0x10 +#define PIC0_MREQ_OFFS 0x14 +#define PIC0_TSTREQ_OFFS 0x18 +#define PIC0_POL_OFFS 0x1c +#define PIC0_IRQ_OFFS 0x20 +#define PIC0_FIQ_OFFS 0x24 +#define PIC0_MIRQ_OFFS 0x28 +#define PIC0_MFIQ_OFFS 0x2c +#define PIC0_TMODE_OFFS 0x30 +#define PIC0_SYNC_OFFS 0x34 +#define PIC0_WKUP_OFFS 0x38 +#define PIC0_TMODEA_OFFS 0x3c +#define PIC0_INTOEN_OFFS 0x40 +#define PIC0_MEN0_OFFS 0x44 +#define PIC0_MEN_OFFS 0x48 + +#define PIC0_IEN __REG(PIC0_BASE + PIC0_IEN_OFFS) +#define PIC0_IEN_PHYS __REG(PIC0_BASE_PHYS + PIC0_IEN_OFFS) +#define PIC0_CREQ __REG(PIC0_BASE + PIC0_CREQ_OFFS) +#define PIC0_CREQ_PHYS __REG(PIC0_BASE_PHYS + PIC0_CREQ_OFFS) +#define PIC0_IREQ __REG(PIC0_BASE + PIC0_IREQ_OFFS) +#define PIC0_IRQSEL __REG(PIC0_BASE + PIC0_IRQSEL_OFFS) +#define PIC0_IRQSEL_PHYS __REG(PIC0_BASE_PHYS + PIC0_IRQSEL_OFFS) +#define PIC0_SRC __REG(PIC0_BASE + PIC0_SRC_OFFS) +#define PIC0_MREQ __REG(PIC0_BASE + PIC0_MREQ_OFFS) +#define PIC0_TSTREQ __REG(PIC0_BASE + PIC0_TSTREQ_OFFS) +#define PIC0_POL __REG(PIC0_BASE + PIC0_POL_OFFS) +#define PIC0_IRQ __REG(PIC0_BASE + PIC0_IRQ_OFFS) +#define PIC0_FIQ __REG(PIC0_BASE + PIC0_FIQ_OFFS) +#define PIC0_MIRQ __REG(PIC0_BASE + PIC0_MIRQ_OFFS) +#define PIC0_MFIQ __REG(PIC0_BASE + PIC0_MFIQ_OFFS) +#define PIC0_TMODE __REG(PIC0_BASE + PIC0_TMODE_OFFS) +#define PIC0_TMODE_PHYS __REG(PIC0_BASE_PHYS + PIC0_TMODE_OFFS) +#define PIC0_SYNC __REG(PIC0_BASE + PIC0_SYNC_OFFS) +#define PIC0_WKUP __REG(PIC0_BASE + PIC0_WKUP_OFFS) +#define PIC0_TMODEA __REG(PIC0_BASE + PIC0_TMODEA_OFFS) +#define PIC0_INTOEN __REG(PIC0_BASE + PIC0_INTOEN_OFFS) +#define PIC0_MEN0 __REG(PIC0_BASE + PIC0_MEN0_OFFS) +#define PIC0_MEN __REG(PIC0_BASE + PIC0_MEN_OFFS) + +#define PIC1_BASE (APB1_PERI_BASE_VIRT + 0x3080) + +#define PIC1_IEN_OFFS 0x00 +#define PIC1_CREQ_OFFS 0x04 +#define PIC1_IREQ_OFFS 0x08 +#define PIC1_IRQSEL_OFFS 0x0c +#define PIC1_SRC_OFFS 0x10 +#define PIC1_MREQ_OFFS 0x14 +#define PIC1_TSTREQ_OFFS 0x18 +#define PIC1_POL_OFFS 0x1c +#define PIC1_IRQ_OFFS 0x20 +#define PIC1_FIQ_OFFS 0x24 +#define PIC1_MIRQ_OFFS 0x28 +#define PIC1_MFIQ_OFFS 0x2c +#define PIC1_TMODE_OFFS 0x30 +#define PIC1_SYNC_OFFS 0x34 +#define PIC1_WKUP_OFFS 0x38 +#define PIC1_TMODEA_OFFS 0x3c +#define PIC1_INTOEN_OFFS 0x40 +#define PIC1_MEN1_OFFS 0x44 +#define PIC1_MEN_OFFS 0x48 + +#define PIC1_IEN __REG(PIC1_BASE + PIC1_IEN_OFFS) +#define PIC1_CREQ __REG(PIC1_BASE + PIC1_CREQ_OFFS) +#define PIC1_IREQ __REG(PIC1_BASE + PIC1_IREQ_OFFS) +#define PIC1_IRQSEL __REG(PIC1_BASE + PIC1_IRQSEL_OFFS) +#define PIC1_SRC __REG(PIC1_BASE + PIC1_SRC_OFFS) +#define PIC1_MREQ __REG(PIC1_BASE + PIC1_MREQ_OFFS) +#define PIC1_TSTREQ __REG(PIC1_BASE + PIC1_TSTREQ_OFFS) +#define PIC1_POL __REG(PIC1_BASE + PIC1_POL_OFFS) +#define PIC1_IRQ __REG(PIC1_BASE + PIC1_IRQ_OFFS) +#define PIC1_FIQ __REG(PIC1_BASE + PIC1_FIQ_OFFS) +#define PIC1_MIRQ __REG(PIC1_BASE + PIC1_MIRQ_OFFS) +#define PIC1_MFIQ __REG(PIC1_BASE + PIC1_MFIQ_OFFS) +#define PIC1_TMODE __REG(PIC1_BASE + PIC1_TMODE_OFFS) +#define PIC1_SYNC __REG(PIC1_BASE + PIC1_SYNC_OFFS) +#define PIC1_WKUP __REG(PIC1_BASE + PIC1_WKUP_OFFS) +#define PIC1_TMODEA __REG(PIC1_BASE + PIC1_TMODEA_OFFS) +#define PIC1_INTOEN __REG(PIC1_BASE + PIC1_INTOEN_OFFS) +#define PIC1_MEN1 __REG(PIC1_BASE + PIC1_MEN1_OFFS) +#define PIC1_MEN __REG(PIC1_BASE + PIC1_MEN_OFFS) + +/* Timer registers */ +#define TIMER_BASE (APB1_PERI_BASE_VIRT + 0x4000) +#define TIMER_BASE_PHYS (APB1_PERI_BASE + 0x4000) + +#define TWDCFG_OFFS 0x70 + +#define TC32EN_OFFS 0x80 +#define TC32LDV_OFFS 0x84 +#define TC32CMP0_OFFS 0x88 +#define TC32CMP1_OFFS 0x8c +#define TC32PCNT_OFFS 0x90 +#define TC32MCNT_OFFS 0x94 +#define TC32IRQ_OFFS 0x98 + +/* Bits in TC32EN */ +#define TC32EN_PRESCALE_MASK 0x00ffffff +#define TC32EN_ENABLE (1 << 24) +#define TC32EN_LOADZERO (1 << 25) +#define TC32EN_STOPMODE (1 << 26) +#define TC32EN_LDM0 (1 << 28) +#define TC32EN_LDM1 (1 << 29) + +/* Bits in TC32IRQ */ +#define TC32IRQ_MSTAT_MASK 0x0000001f +#define TC32IRQ_RSTAT_MASK (0x1f << 8) +#define TC32IRQ_IRQEN0 (1 << 16) +#define TC32IRQ_IRQEN1 (1 << 17) +#define TC32IRQ_IRQEN2 (1 << 18) +#define TC32IRQ_IRQEN3 (1 << 19) +#define TC32IRQ_IRQEN4 (1 << 20) +#define TC32IRQ_RSYNC (1 << 30) +#define TC32IRQ_IRQCLR (1 << 31) + +/* GPIO registers */ +#define GPIOPD_BASE (APB1_PERI_BASE_VIRT + 0x5000) + +#define GPIOPD_DAT_OFFS 0x00 +#define GPIOPD_DOE_OFFS 0x04 +#define GPIOPD_FS0_OFFS 0x08 +#define GPIOPD_FS1_OFFS 0x0c +#define GPIOPD_FS2_OFFS 0x10 +#define GPIOPD_RPU_OFFS 0x30 +#define GPIOPD_RPD_OFFS 0x34 +#define GPIOPD_DV0_OFFS 0x38 +#define GPIOPD_DV1_OFFS 0x3c + +#define GPIOPS_BASE (APB1_PERI_BASE_VIRT + 0x5000) + +#define GPIOPS_DAT_OFFS 0x40 +#define GPIOPS_DOE_OFFS 0x44 +#define GPIOPS_FS0_OFFS 0x48 +#define GPIOPS_FS1_OFFS 0x4c +#define GPIOPS_FS2_OFFS 0x50 +#define GPIOPS_FS3_OFFS 0x54 +#define GPIOPS_RPU_OFFS 0x70 +#define GPIOPS_RPD_OFFS 0x74 +#define GPIOPS_DV0_OFFS 0x78 +#define GPIOPS_DV1_OFFS 0x7c + +#define GPIOPS_FS1_SDH0_BITS 0x000000ff +#define GPIOPS_FS1_SDH1_BITS 0x0000ff00 + +#define GPIOPU_BASE (APB1_PERI_BASE_VIRT + 0x5000) + +#define GPIOPU_DAT_OFFS 0x80 +#define GPIOPU_DOE_OFFS 0x84 +#define GPIOPU_FS0_OFFS 0x88 +#define GPIOPU_FS1_OFFS 0x8c +#define GPIOPU_FS2_OFFS 0x90 +#define GPIOPU_RPU_OFFS 0xb0 +#define GPIOPU_RPD_OFFS 0xb4 +#define GPIOPU_DV0_OFFS 0xb8 +#define GPIOPU_DV1_OFFS 0xbc + +#define GPIOPU_FS0_TXD0 (1 << 0) +#define GPIOPU_FS0_RXD0 (1 << 1) +#define GPIOPU_FS0_CTS0 (1 << 2) +#define GPIOPU_FS0_RTS0 (1 << 3) +#define GPIOPU_FS0_TXD1 (1 << 4) +#define GPIOPU_FS0_RXD1 (1 << 5) +#define GPIOPU_FS0_CTS1 (1 << 6) +#define GPIOPU_FS0_RTS1 (1 << 7) +#define GPIOPU_FS0_TXD2 (1 << 8) +#define GPIOPU_FS0_RXD2 (1 << 9) +#define GPIOPU_FS0_CTS2 (1 << 10) +#define GPIOPU_FS0_RTS2 (1 << 11) +#define GPIOPU_FS0_TXD3 (1 << 12) +#define GPIOPU_FS0_RXD3 (1 << 13) +#define GPIOPU_FS0_CTS3 (1 << 14) +#define GPIOPU_FS0_RTS3 (1 << 15) +#define GPIOPU_FS0_TXD4 (1 << 16) +#define GPIOPU_FS0_RXD4 (1 << 17) +#define GPIOPU_FS0_CTS4 (1 << 18) +#define GPIOPU_FS0_RTS4 (1 << 19) + +#define GPIOFC_BASE (APB1_PERI_BASE_VIRT + 0x5000) + +#define GPIOFC_DAT_OFFS 0xc0 +#define GPIOFC_DOE_OFFS 0xc4 +#define GPIOFC_FS0_OFFS 0xc8 +#define GPIOFC_FS1_OFFS 0xcc +#define GPIOFC_FS2_OFFS 0xd0 +#define GPIOFC_FS3_OFFS 0xd4 +#define GPIOFC_RPU_OFFS 0xf0 +#define GPIOFC_RPD_OFFS 0xf4 +#define GPIOFC_DV0_OFFS 0xf8 +#define GPIOFC_DV1_OFFS 0xfc + +#define GPIOFD_BASE (APB1_PERI_BASE_VIRT + 0x5000) + +#define GPIOFD_DAT_OFFS 0x100 +#define GPIOFD_DOE_OFFS 0x104 +#define GPIOFD_FS0_OFFS 0x108 +#define GPIOFD_FS1_OFFS 0x10c +#define GPIOFD_FS2_OFFS 0x110 +#define GPIOFD_RPU_OFFS 0x130 +#define GPIOFD_RPD_OFFS 0x134 +#define GPIOFD_DV0_OFFS 0x138 +#define GPIOFD_DV1_OFFS 0x13c + +#define GPIOLC_BASE (APB1_PERI_BASE_VIRT + 0x5000) + +#define GPIOLC_DAT_OFFS 0x140 +#define GPIOLC_DOE_OFFS 0x144 +#define GPIOLC_FS0_OFFS 0x148 +#define GPIOLC_FS1_OFFS 0x14c +#define GPIOLC_RPU_OFFS 0x170 +#define GPIOLC_RPD_OFFS 0x174 +#define GPIOLC_DV0_OFFS 0x178 +#define GPIOLC_DV1_OFFS 0x17c + +#define GPIOLD_BASE (APB1_PERI_BASE_VIRT + 0x5000) + +#define GPIOLD_DAT_OFFS 0x180 +#define GPIOLD_DOE_OFFS 0x184 +#define GPIOLD_FS0_OFFS 0x188 +#define GPIOLD_FS1_OFFS 0x18c +#define GPIOLD_FS2_OFFS 0x190 +#define GPIOLD_RPU_OFFS 0x1b0 +#define GPIOLD_RPD_OFFS 0x1b4 +#define GPIOLD_DV0_OFFS 0x1b8 +#define GPIOLD_DV1_OFFS 0x1bc + +#define GPIOAD_BASE (APB1_PERI_BASE_VIRT + 0x5000) + +#define GPIOAD_DAT_OFFS 0x1c0 +#define GPIOAD_DOE_OFFS 0x1c4 +#define GPIOAD_FS0_OFFS 0x1c8 +#define GPIOAD_RPU_OFFS 0x1f0 +#define GPIOAD_RPD_OFFS 0x1f4 +#define GPIOAD_DV0_OFFS 0x1f8 +#define GPIOAD_DV1_OFFS 0x1fc + +#define GPIOXC_BASE (APB1_PERI_BASE_VIRT + 0x5000) + +#define GPIOXC_DAT_OFFS 0x200 +#define GPIOXC_DOE_OFFS 0x204 +#define GPIOXC_FS0_OFFS 0x208 +#define GPIOXC_RPU_OFFS 0x230 +#define GPIOXC_RPD_OFFS 0x234 +#define GPIOXC_DV0_OFFS 0x238 +#define GPIOXC_DV1_OFFS 0x23c + +#define GPIOXC_FS0 __REG(GPIOXC_BASE + GPIOXC_FS0_OFFS) + +#define GPIOXC_FS0_CS0 (1 << 26) +#define GPIOXC_FS0_CS1 (1 << 27) + +#define GPIOXD_BASE (APB1_PERI_BASE_VIRT + 0x5000) + +#define GPIOXD_DAT_OFFS 0x240 +#define GPIOXD_FS0_OFFS 0x248 +#define GPIOXD_RPU_OFFS 0x270 +#define GPIOXD_RPD_OFFS 0x274 +#define GPIOXD_DV0_OFFS 0x278 +#define GPIOXD_DV1_OFFS 0x27c + +#define GPIOPK_BASE (APB1_PERI_BASE_VIRT + 0x1c000) + +#define GPIOPK_RST_OFFS 0x008 +#define GPIOPK_DAT_OFFS 0x100 +#define GPIOPK_DOE_OFFS 0x104 +#define GPIOPK_FS0_OFFS 0x108 +#define GPIOPK_FS1_OFFS 0x10c +#define GPIOPK_FS2_OFFS 0x110 +#define GPIOPK_IRQST_OFFS 0x210 +#define GPIOPK_IRQEN_OFFS 0x214 +#define GPIOPK_IRQPOL_OFFS 0x218 +#define GPIOPK_IRQTM0_OFFS 0x21c +#define GPIOPK_IRQTM1_OFFS 0x220 +#define GPIOPK_CTL_OFFS 0x22c + +#define PMGPIO_BASE (APB1_PERI_BASE_VIRT + 0x10000) +#define BACKUP_RAM_BASE PMGPIO_BASE + +#define PMGPIO_DAT_OFFS 0x800 +#define PMGPIO_DOE_OFFS 0x804 +#define PMGPIO_FS0_OFFS 0x808 +#define PMGPIO_RPU_OFFS 0x810 +#define PMGPIO_RPD_OFFS 0x814 +#define PMGPIO_DV0_OFFS 0x818 +#define PMGPIO_DV1_OFFS 0x81c +#define PMGPIO_EE0_OFFS 0x820 +#define PMGPIO_EE1_OFFS 0x824 +#define PMGPIO_CTL_OFFS 0x828 +#define PMGPIO_DI_OFFS 0x82c +#define PMGPIO_STR_OFFS 0x830 +#define PMGPIO_STF_OFFS 0x834 +#define PMGPIO_POL_OFFS 0x838 +#define PMGPIO_APB_OFFS 0x800 + +/* Clock controller registers */ +#define CKC_BASE (APB1_PERI_BASE_VIRT + 0x6000) +#define CKC_BASE_PHYS (APB1_PERI_BASE + 0x6000) + +#define CLKCTRL_OFFS 0x00 +#define PLL0CFG_OFFS 0x04 +#define PLL1CFG_OFFS 0x08 +#define CLKDIVC0_OFFS 0x0c + +#define BCLKCTR0_OFFS 0x14 +#define SWRESET0_OFFS 0x18 + +#define BCLKCTR1_OFFS 0x60 +#define SWRESET1_OFFS 0x64 +#define PWDCTL_OFFS 0x68 +#define PLL2CFG_OFFS 0x6c +#define CLKDIVC1_OFFS 0x70 + +#define ACLKREF_OFFS 0x80 +#define ACLKI2C_OFFS 0x84 +#define ACLKSPI0_OFFS 0x88 +#define ACLKSPI1_OFFS 0x8c +#define ACLKUART0_OFFS 0x90 +#define ACLKUART1_OFFS 0x94 +#define ACLKUART2_OFFS 0x98 +#define ACLKUART3_OFFS 0x9c +#define ACLKUART4_OFFS 0xa0 +#define ACLKTCT_OFFS 0xa4 +#define ACLKTCX_OFFS 0xa8 +#define ACLKTCZ_OFFS 0xac +#define ACLKADC_OFFS 0xb0 +#define ACLKDAI0_OFFS 0xb4 +#define ACLKDAI1_OFFS 0xb8 +#define ACLKLCD_OFFS 0xbc +#define ACLKSPDIF_OFFS 0xc0 +#define ACLKUSBH_OFFS 0xc4 +#define ACLKSDH0_OFFS 0xc8 +#define ACLKSDH1_OFFS 0xcc +#define ACLKC3DEC_OFFS 0xd0 +#define ACLKEXT_OFFS 0xd4 +#define ACLKCAN0_OFFS 0xd8 +#define ACLKCAN1_OFFS 0xdc +#define ACLKGSB0_OFFS 0xe0 +#define ACLKGSB1_OFFS 0xe4 +#define ACLKGSB2_OFFS 0xe8 +#define ACLKGSB3_OFFS 0xec + +#define PLLxCFG_PD (1 << 31) + +/* CLKCTRL bits */ +#define CLKCTRL_XE (1 << 31) + +/* CLKDIVCx bits */ +#define CLKDIVC0_XTE (1 << 7) +#define CLKDIVC0_XE (1 << 15) +#define CLKDIVC0_P1E (1 << 23) +#define CLKDIVC0_P0E (1 << 31) + +#define CLKDIVC1_P2E (1 << 7) + +/* BCLKCTR0 clock bits */ +#define BCLKCTR0_USBD (1 << 4) +#define BCLKCTR0_ECC (1 << 9) +#define BCLKCTR0_USBH0 (1 << 11) +#define BCLKCTR0_NFC (1 << 16) + +/* BCLKCTR1 clock bits */ +#define BCLKCTR1_USBH1 (1 << 20) + +/* SWRESET0 bits */ +#define SWRESET0_USBD (1 << 4) +#define SWRESET0_USBH0 (1 << 11) + +/* SWRESET1 bits */ +#define SWRESET1_USBH1 (1 << 20) + +/* System clock sources */ +enum root_clks { + CLK_SRC_PLL0 = 0, + CLK_SRC_PLL1, + CLK_SRC_PLL0DIV, + CLK_SRC_PLL1DIV, + CLK_SRC_XI, + CLK_SRC_XIDIV, + CLK_SRC_XTI, + CLK_SRC_XTIDIV, + CLK_SRC_PLL2, + CLK_SRC_PLL2DIV, + CLK_SRC_PK0, + CLK_SRC_PK1, + CLK_SRC_PK2, + CLK_SRC_PK3, + CLK_SRC_PK4, + CLK_SRC_48MHZ +}; + +#define CLK_SRC_MASK 0xf + +/* Bits in ACLK* registers */ +#define ACLK_EN (1 << 28) +#define ACLK_SEL_SHIFT 24 +#define ACLK_SEL_MASK 0x0f000000 +#define ACLK_DIV_MASK 0x00000fff + +/* System configuration registers */ + +#define SCFG_BASE (APB1_PERI_BASE_VIRT + 0x13000) + +#define BMI_OFFS 0x00 +#define AHBCON0_OFFS 0x04 +#define APBPWE_OFFS 0x08 +#define DTCMWAIT_OFFS 0x0c +#define ECCSEL_OFFS 0x10 +#define AHBCON1_OFFS 0x14 +#define SDHCFG_OFFS 0x18 +#define REMAP_OFFS 0x20 +#define LCDSIAE_OFFS 0x24 +#define XMCCFG_OFFS 0xe0 +#define IMCCFG_OFFS 0xe4 + +/* Values for ECCSEL */ +#define ECCSEL_EXTMEM 0x0 +#define ECCSEL_DTCM 0x1 +#define ECCSEL_INT_SRAM 0x2 +#define ECCSEL_AHB 0x3 + +/* Bits in XMCCFG */ +#define XMCCFG_NFCE (1 << 1) +#define XMCCFG_FDXD (1 << 2) + +/* External memory controller registers */ + +#define EMC_BASE EXT_MEM_CTRL_BASE + +#define SDCFG_OFFS 0x00 +#define SDFSM_OFFS 0x04 +#define MCFG_OFFS 0x08 + +#define CSCFG0_OFFS 0x10 +#define CSCFG1_OFFS 0x14 +#define CSCFG2_OFFS 0x18 +#define CSCFG3_OFFS 0x1c + +#define MCFG_SDEN (1 << 4) + +#endif /* TCC8K_REGS_H */ diff --git a/arch/arm/plat-tcc/include/mach/uncompress.h b/arch/arm/plat-tcc/include/mach/uncompress.h new file mode 100644 index 00000000000..7a3e33a27a3 --- /dev/null +++ b/arch/arm/plat-tcc/include/mach/uncompress.h @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de> + * + * This file is licensed under the terms of the GPL version 2. + */ + +#include <linux/serial_reg.h> +#include <linux/types.h> + +#include <mach/tcc8k-regs.h> + +unsigned int system_rev; + +#define ID_MASK 0x7fff + +static void putc(int c) +{ + u32 *uart_lsr = (u32 *)(UART_BASE_PHYS + (UART_LSR << 2)); + u32 *uart_tx = (u32 *)(UART_BASE_PHYS + (UART_TX << 2)); + + while (!(*uart_lsr & UART_LSR_THRE)) + barrier(); + *uart_tx = c; +} + +static inline void flush(void) +{ +} + +/* + * nothing to do + */ +#define arch_decomp_setup() +#define arch_decomp_wdog() diff --git a/arch/arm/plat-tcc/include/mach/vmalloc.h b/arch/arm/plat-tcc/include/mach/vmalloc.h new file mode 100644 index 00000000000..99414d9c2b9 --- /dev/null +++ b/arch/arm/plat-tcc/include/mach/vmalloc.h @@ -0,0 +1,10 @@ +/* + * Author: <linux@telechips.com> + * Created: June 10, 2008 + * + * Copyright (C) 2000 Russell King. + * Copyright (C) 2008-2009 Telechips + * + * Licensed under the terms of the GPL v2. + */ +#define VMALLOC_END 0xf0000000UL diff --git a/arch/arm/plat-tcc/system.c b/arch/arm/plat-tcc/system.c new file mode 100644 index 00000000000..cc208fae3e7 --- /dev/null +++ b/arch/arm/plat-tcc/system.c @@ -0,0 +1,25 @@ +/* + * System functions for Telechips TCCxxxx SoCs + * + * Copyright (C) Hans J. Koch <hjk@linutronix.de> + * + * Licensed under the terms of the GPL v2. + * + */ + +#include <linux/io.h> + +#include <mach/tcc8k-regs.h> + +/* System reboot */ +void plat_tcc_reboot(void) +{ + /* Make sure clocks are on */ + __raw_writel(0xffffffff, CKC_BASE + BCLKCTR0_OFFS); + + /* Enable watchdog reset */ + __raw_writel(0x49, TIMER_BASE + TWDCFG_OFFS); + /* Wait for reset */ + while(1) + ; +} |