summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/usb/host/pci-quirks.c142
-rw-r--r--drivers/usb/host/uhci-hcd.c76
2 files changed, 106 insertions, 112 deletions
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 49f7381a6fd..f7411ca4883 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -9,6 +9,12 @@
*/
#include <linux/config.h>
+#ifdef CONFIG_USB_DEBUG
+#define DEBUG
+#else
+#undef DEBUG
+#endif
+
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/pci.h>
@@ -46,13 +52,14 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_2, qui
#define UHCI_USBLEGSUP 0xc0 /* legacy support */
#define UHCI_USBCMD 0 /* command register */
-#define UHCI_USBSTS 2 /* status register */
#define UHCI_USBINTR 4 /* interrupt register */
-#define UHCI_USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */
-#define UHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */
-#define UHCI_USBCMD_GRESET (1 << 2) /* Global reset */
-#define UHCI_USBCMD_CONFIGURE (1 << 6) /* config semaphore */
-#define UHCI_USBSTS_HALTED (1 << 5) /* HCHalted bit */
+#define UHCI_USBLEGSUP_RWC 0x8f00 /* the R/WC bits */
+#define UHCI_USBLEGSUP_RO 0x5040 /* R/O and reserved bits */
+#define UHCI_USBCMD_RUN 0x0001 /* RUN/STOP bit */
+#define UHCI_USBCMD_HCRESET 0x0002 /* Host Controller reset */
+#define UHCI_USBCMD_EGSM 0x0008 /* Global Suspend Mode */
+#define UHCI_USBCMD_CONFIGURE 0x0040 /* Config Flag */
+#define UHCI_USBINTR_RESUME 0x0002 /* Resume interrupt enable */
#define OHCI_CONTROL 0x04
#define OHCI_CMDSTATUS 0x08
@@ -84,57 +91,100 @@ static int __init usb_handoff_early(char *str)
}
__setup("usb-handoff", usb_handoff_early);
-static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev)
+/*
+ * Make sure the controller is completely inactive, unable to
+ * generate interrupts or do DMA.
+ */
+void uhci_reset_hc(struct pci_dev *pdev, unsigned long base)
{
- unsigned long base = 0;
- int wait_time, delta;
- u16 val, sts;
- int i;
+ /* Turn off PIRQ enable and SMI enable. (This also turns off the
+ * BIOS's USB Legacy Support.) Turn off all the R/WC bits too.
+ */
+ pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_RWC);
- for (i = 0; i < PCI_ROM_RESOURCE; i++)
- if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) {
- base = pci_resource_start(pdev, i);
- break;
- }
+ /* Reset the HC - this will force us to get a
+ * new notification of any already connected
+ * ports due to the virtual disconnect that it
+ * implies.
+ */
+ outw(UHCI_USBCMD_HCRESET, base + UHCI_USBCMD);
+ mb();
+ udelay(5);
+ if (inw(base + UHCI_USBCMD) & UHCI_USBCMD_HCRESET)
+ dev_warn(&pdev->dev, "HCRESET not completed yet!\n");
+
+ /* Just to be safe, disable interrupt requests and
+ * make sure the controller is stopped.
+ */
+ outw(0, base + UHCI_USBINTR);
+ outw(0, base + UHCI_USBCMD);
+}
+EXPORT_SYMBOL_GPL(uhci_reset_hc);
- if (!base)
- return;
+/*
+ * Initialize a controller that was newly discovered or has just been
+ * resumed. In either case we can't be sure of its previous state.
+ *
+ * Returns: 1 if the controller was reset, 0 otherwise.
+ */
+int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base)
+{
+ u16 legsup;
+ unsigned int cmd, intr;
/*
- * stop controller
+ * When restarting a suspended controller, we expect all the
+ * settings to be the same as we left them:
+ *
+ * PIRQ and SMI disabled, no R/W bits set in USBLEGSUP;
+ * Controller is stopped and configured with EGSM set;
+ * No interrupts enabled except possibly Resume Detect.
+ *
+ * If any of these conditions are violated we do a complete reset.
*/
- sts = inw(base + UHCI_USBSTS);
- val = inw(base + UHCI_USBCMD);
- val &= ~(u16)(UHCI_USBCMD_RUN | UHCI_USBCMD_CONFIGURE);
- outw(val, base + UHCI_USBCMD);
+ pci_read_config_word(pdev, UHCI_USBLEGSUP, &legsup);
+ if (legsup & ~(UHCI_USBLEGSUP_RO | UHCI_USBLEGSUP_RWC)) {
+ dev_dbg(&pdev->dev, "%s: legsup = 0x%04x\n",
+ __FUNCTION__, legsup);
+ goto reset_needed;
+ }
- /*
- * wait while it stops if it was running
- */
- if ((sts & UHCI_USBSTS_HALTED) == 0)
- {
- wait_time = 1000;
- delta = 100;
+ cmd = inw(base + UHCI_USBCMD);
+ if ((cmd & UHCI_USBCMD_RUN) || !(cmd & UHCI_USBCMD_CONFIGURE) ||
+ !(cmd & UHCI_USBCMD_EGSM)) {
+ dev_dbg(&pdev->dev, "%s: cmd = 0x%04x\n",
+ __FUNCTION__, cmd);
+ goto reset_needed;
+ }
- do {
- outw(0x1f, base + UHCI_USBSTS);
- udelay(delta);
- wait_time -= delta;
- val = inw(base + UHCI_USBSTS);
- if (val & UHCI_USBSTS_HALTED)
- break;
- } while (wait_time > 0);
+ intr = inw(base + UHCI_USBINTR);
+ if (intr & (~UHCI_USBINTR_RESUME)) {
+ dev_dbg(&pdev->dev, "%s: intr = 0x%04x\n",
+ __FUNCTION__, intr);
+ goto reset_needed;
}
+ return 0;
- /*
- * disable interrupts & legacy support
- */
- outw(0, base + UHCI_USBINTR);
- outw(0x1f, base + UHCI_USBSTS);
- pci_read_config_word(pdev, UHCI_USBLEGSUP, &val);
- if (val & 0xbf)
- pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_DEFAULT);
+reset_needed:
+ dev_dbg(&pdev->dev, "Performing full reset\n");
+ uhci_reset_hc(pdev, base);
+ return 1;
+}
+EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);
+
+static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev)
+{
+ unsigned long base = 0;
+ int i;
+
+ for (i = 0; i < PCI_ROM_RESOURCE; i++)
+ if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) {
+ base = pci_resource_start(pdev, i);
+ break;
+ }
+ if (base)
+ uhci_check_and_reset_hc(pdev, base);
}
static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 34c9dbc6a15..6df555e3d97 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -101,37 +101,16 @@ static void uhci_get_current_frame_number(struct uhci_hcd *uhci);
#include "uhci-q.c"
#include "uhci-hub.c"
+extern void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
+extern int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
+
/*
- * Make sure the controller is completely inactive, unable to
- * generate interrupts or do DMA.
+ * Finish up a host controller reset and update the recorded state.
*/
-static void reset_hc(struct uhci_hcd *uhci)
+static void finish_reset(struct uhci_hcd *uhci)
{
int port;
- /* Turn off PIRQ enable and SMI enable. (This also turns off the
- * BIOS's USB Legacy Support.) Turn off all the R/WC bits too.
- */
- pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP,
- USBLEGSUP_RWC);
-
- /* Reset the HC - this will force us to get a
- * new notification of any already connected
- * ports due to the virtual disconnect that it
- * implies.
- */
- outw(USBCMD_HCRESET, uhci->io_addr + USBCMD);
- mb();
- udelay(5);
- if (inw(uhci->io_addr + USBCMD) & USBCMD_HCRESET)
- dev_warn(uhci_dev(uhci), "HCRESET not completed yet!\n");
-
- /* Just to be safe, disable interrupt requests and
- * make sure the controller is stopped.
- */
- outw(0, uhci->io_addr + USBINTR);
- outw(0, uhci->io_addr + USBCMD);
-
/* HCRESET doesn't affect the Suspend, Reset, and Resume Detect
* bits in the port status and control registers.
* We have to clear them by hand.
@@ -153,7 +132,8 @@ static void reset_hc(struct uhci_hcd *uhci)
*/
static void hc_died(struct uhci_hcd *uhci)
{
- reset_hc(uhci);
+ uhci_reset_hc(to_pci_dev(uhci_dev(uhci)), uhci->io_addr);
+ finish_reset(uhci);
uhci->hc_inaccessible = 1;
}
@@ -163,44 +143,8 @@ static void hc_died(struct uhci_hcd *uhci)
*/
static void check_and_reset_hc(struct uhci_hcd *uhci)
{
- u16 legsup;
- unsigned int cmd, intr;
-
- /*
- * When restarting a suspended controller, we expect all the
- * settings to be the same as we left them:
- *
- * PIRQ and SMI disabled, no R/W bits set in USBLEGSUP;
- * Controller is stopped and configured with EGSM set;
- * No interrupts enabled except possibly Resume Detect.
- *
- * If any of these conditions are violated we do a complete reset.
- */
- pci_read_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, &legsup);
- if (legsup & ~(USBLEGSUP_RO | USBLEGSUP_RWC)) {
- dev_dbg(uhci_dev(uhci), "%s: legsup = 0x%04x\n",
- __FUNCTION__, legsup);
- goto reset_needed;
- }
-
- cmd = inw(uhci->io_addr + USBCMD);
- if ((cmd & USBCMD_RS) || !(cmd & USBCMD_CF) || !(cmd & USBCMD_EGSM)) {
- dev_dbg(uhci_dev(uhci), "%s: cmd = 0x%04x\n",
- __FUNCTION__, cmd);
- goto reset_needed;
- }
-
- intr = inw(uhci->io_addr + USBINTR);
- if (intr & (~USBINTR_RESUME)) {
- dev_dbg(uhci_dev(uhci), "%s: intr = 0x%04x\n",
- __FUNCTION__, intr);
- goto reset_needed;
- }
- return;
-
-reset_needed:
- dev_dbg(uhci_dev(uhci), "Performing full reset\n");
- reset_hc(uhci);
+ if (uhci_check_and_reset_hc(to_pci_dev(uhci_dev(uhci)), uhci->io_addr))
+ finish_reset(uhci);
}
/*
@@ -714,7 +658,7 @@ static void uhci_stop(struct usb_hcd *hcd)
spin_lock_irq(&uhci->lock);
if (!uhci->hc_inaccessible)
- reset_hc(uhci);
+ hc_died(uhci);
uhci_scan_schedule(uhci, NULL);
spin_unlock_irq(&uhci->lock);