summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/sound/alsa/HD-Audio-Models.txt1
-rw-r--r--sound/pci/hda/alc260_quirks.c142
2 files changed, 0 insertions, 143 deletions
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index e63d5e2ed47..53703392053 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -29,7 +29,6 @@ ALC880
ALC260
======
- fujitsu Fujitsu S7020
basic fixed pin assignment (old default model)
test for testing/debugging purpose, almost all controls can
adjusted. Appearing only when compiled with
diff --git a/sound/pci/hda/alc260_quirks.c b/sound/pci/hda/alc260_quirks.c
index 94e7a270c5a..305341f892c 100644
--- a/sound/pci/hda/alc260_quirks.c
+++ b/sound/pci/hda/alc260_quirks.c
@@ -7,7 +7,6 @@
enum {
ALC260_AUTO,
ALC260_BASIC,
- ALC260_FUJITSU_S702X,
#ifdef CONFIG_SND_DEBUG
ALC260_TEST,
#endif
@@ -50,33 +49,6 @@ static const struct hda_input_mux alc260_capture_source = {
},
};
-/* On Fujitsu S702x laptops capture only makes sense from Mic/LineIn jack,
- * headphone jack and the internal CD lines since these are the only pins at
- * which audio can appear. For flexibility, also allow the option of
- * recording the mixer output on the second ADC (ADC0 doesn't have a
- * connection to the mixer output).
- */
-static const struct hda_input_mux alc260_fujitsu_capture_sources[2] = {
- {
- .num_items = 3,
- .items = {
- { "Mic/Line", 0x0 },
- { "CD", 0x4 },
- { "Headphone", 0x2 },
- },
- },
- {
- .num_items = 4,
- .items = {
- { "Mic/Line", 0x0 },
- { "CD", 0x4 },
- { "Headphone", 0x2 },
- { "Mixer", 0x5 },
- },
- },
-
-};
-
/* Acer TravelMate(/Extensa/Aspire) notebooks have similar configuration to
* the Fujitsu S702x, but jacks are marked differently.
*/
@@ -142,23 +114,6 @@ static const struct snd_kcontrol_new alc260_input_mixer[] = {
{ } /* end */
};
-/* Fujitsu S702x series laptops. ALC260 pin usage: Mic/Line jack = 0x12,
- * HP jack = 0x14, CD audio = 0x16, internal speaker = 0x10.
- */
-static const struct snd_kcontrol_new alc260_fujitsu_mixer[] = {
- HDA_CODEC_VOLUME("Headphone Playback Volume", 0x08, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Headphone Playback Switch", 0x08, 2, HDA_INPUT),
- ALC_PIN_MODE("Headphone Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
- HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
- HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic/Line Playback Volume", 0x07, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mic/Line Playback Switch", 0x07, 0x0, HDA_INPUT),
- ALC_PIN_MODE("Mic/Line Jack Mode", 0x12, ALC_PIN_DIR_IN),
- HDA_CODEC_VOLUME("Speaker Playback Volume", 0x09, 0x0, HDA_OUTPUT),
- HDA_BIND_MUTE("Speaker Playback Switch", 0x09, 2, HDA_INPUT),
- { } /* end */
-};
-
/*
* initialization verbs
*/
@@ -225,89 +180,6 @@ static const struct hda_verb alc260_init_verbs[] = {
{ }
};
-/* Initialisation sequence for ALC260 as configured in Fujitsu S702x
- * laptops. ALC260 pin usage: Mic/Line jack = 0x12, HP jack = 0x14, CD
- * audio = 0x16, internal speaker = 0x10.
- */
-static const struct hda_verb alc260_fujitsu_init_verbs[] = {
- /* Disable all GPIOs */
- {0x01, AC_VERB_SET_GPIO_MASK, 0},
- /* Internal speaker is connected to headphone pin */
- {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
- /* Headphone/Line-out jack connects to Line1 pin; make it an output */
- {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- /* Mic/Line-in jack is connected to mic1 pin, so make it an input */
- {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- /* Ensure all other unused pins are disabled and muted. */
- {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
- {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
- {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
- {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-
- /* Disable digital (SPDIF) pins */
- {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
- {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},
-
- /* Ensure Line1 pin widget takes its input from the OUT1 sum bus
- * when acting as an output.
- */
- {0x0d, AC_VERB_SET_CONNECT_SEL, 0},
-
- /* Start with output sum widgets muted and their output gains at min */
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-
- /* Unmute HP pin widget amp left and right (no equiv mixer ctrl) */
- {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* Unmute Line1 pin widget output buffer since it starts as an output.
- * If the pin mode is changed by the user the pin mode control will
- * take care of enabling the pin's input/output buffers as needed.
- * Therefore there's no need to enable the input buffer at this
- * stage.
- */
- {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* Unmute input buffer of pin widget used for Line-in (no equiv
- * mixer ctrl)
- */
- {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-
- /* Mute capture amp left and right */
- {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- /* Set ADC connection select to match default mixer setting - line
- * in (on mic1 pin)
- */
- {0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
-
- /* Do the same for the second ADC: mute capture input amp and
- * set ADC connection to line in (on mic1 pin)
- */
- {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
-
- /* Mute all inputs to mixer widget (even unconnected ones) */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
- {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */
-
- { }
-};
-
static const struct hda_verb alc260_hp_dc7600_verbs[] = {
{0x05, AC_VERB_SET_CONNECT_SEL, 0x01},
{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
@@ -515,7 +387,6 @@ static const struct hda_verb alc260_test_init_verbs[] = {
*/
static const char * const alc260_models[ALC260_MODEL_LAST] = {
[ALC260_BASIC] = "basic",
- [ALC260_FUJITSU_S702X] = "fujitsu",
#ifdef CONFIG_SND_DEBUG
[ALC260_TEST] = "test",
#endif
@@ -526,7 +397,6 @@ static const struct snd_pci_quirk alc260_cfg_tbl[] = {
SND_PCI_QUIRK(0x104d, 0x81bb, "Sony VAIO", ALC260_BASIC),
SND_PCI_QUIRK(0x104d, 0x81cc, "Sony VAIO", ALC260_BASIC),
SND_PCI_QUIRK(0x104d, 0x81cd, "Sony VAIO", ALC260_BASIC),
- SND_PCI_QUIRK(0x10cf, 0x1326, "Fujitsu S702X", ALC260_FUJITSU_S702X),
SND_PCI_QUIRK(0x152d, 0x0729, "CTL U553W", ALC260_BASIC),
{}
};
@@ -544,18 +414,6 @@ static const struct alc_config_preset alc260_presets[] = {
.channel_mode = alc260_modes,
.input_mux = &alc260_capture_source,
},
- [ALC260_FUJITSU_S702X] = {
- .mixers = { alc260_fujitsu_mixer },
- .init_verbs = { alc260_fujitsu_init_verbs },
- .num_dacs = ARRAY_SIZE(alc260_dac_nids),
- .dac_nids = alc260_dac_nids,
- .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
- .adc_nids = alc260_dual_adc_nids,
- .num_channel_mode = ARRAY_SIZE(alc260_modes),
- .channel_mode = alc260_modes,
- .num_mux_defs = ARRAY_SIZE(alc260_fujitsu_capture_sources),
- .input_mux = alc260_fujitsu_capture_sources,
- },
#ifdef CONFIG_SND_DEBUG
[ALC260_TEST] = {
.mixers = { alc260_test_mixer },
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-03 04:54:21 +0000