diff options
| -rw-r--r-- | drivers/ata/libata-core.c | 36 | ||||
| -rw-r--r-- | drivers/ata/pata_it821x.c | 35 |
2 files changed, 53 insertions, 18 deletions
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index ee72994500a..627703cba9a 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -950,8 +950,8 @@ unsigned int ata_dev_try_classify(struct ata_device *dev, int present, if (r_err) *r_err = err; - /* see if device passed diags: if master then continue and warn later */ - if (err == 0 && dev->devno == 0) + /* see if device passed diags: continue and warn later */ + if (err == 0) /* diagnostic fail : do nothing _YET_ */ dev->horkage |= ATA_HORKAGE_DIAGNOSTIC; else if (err == 1) @@ -2262,19 +2262,8 @@ int ata_dev_configure(struct ata_device *dev) dev->flags |= ATA_DFLAG_DIPM; } - if (dev->horkage & ATA_HORKAGE_DIAGNOSTIC) { - /* Let the user know. We don't want to disallow opens for - rescue purposes, or in case the vendor is just a blithering - idiot */ - if (print_info) { - ata_dev_printk(dev, KERN_WARNING, -"Drive reports diagnostics failure. This may indicate a drive\n"); - ata_dev_printk(dev, KERN_WARNING, -"fault or invalid emulation. Contact drive vendor for information.\n"); - } - } - - /* limit bridge transfers to udma5, 200 sectors */ + /* Limit PATA drive on SATA cable bridge transfers to udma5, + 200 sectors */ if (ata_dev_knobble(dev)) { if (ata_msg_drv(ap) && print_info) ata_dev_printk(dev, KERN_INFO, @@ -2303,6 +2292,21 @@ int ata_dev_configure(struct ata_device *dev) if (ap->ops->dev_config) ap->ops->dev_config(dev); + if (dev->horkage & ATA_HORKAGE_DIAGNOSTIC) { + /* Let the user know. We don't want to disallow opens for + rescue purposes, or in case the vendor is just a blithering + idiot. Do this after the dev_config call as some controllers + with buggy firmware may want to avoid reporting false device + bugs */ + + if (print_info) { + ata_dev_printk(dev, KERN_WARNING, +"Drive reports diagnostics failure. This may indicate a drive\n"); + ata_dev_printk(dev, KERN_WARNING, +"fault or invalid emulation. Contact drive vendor for information.\n"); + } + } + if (ata_msg_probe(ap)) ata_dev_printk(dev, KERN_DEBUG, "%s: EXIT, drv_stat = 0x%x\n", __FUNCTION__, ata_chk_status(ap)); @@ -3066,7 +3070,7 @@ static int ata_dev_set_mode(struct ata_device *dev) /* Early MWDMA devices do DMA but don't allow DMA mode setting. Don't fail an MWDMA0 set IFF the device indicates it is in MWDMA0 */ - if (dev->xfer_shift == ATA_SHIFT_MWDMA && + if (dev->xfer_shift == ATA_SHIFT_MWDMA && dev->dma_mode == XFER_MW_DMA_0 && (dev->id[63] >> 8) & 1) err_mask &= ~AC_ERR_DEV; diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index ca9aae09dae..109ddd42c26 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -430,7 +430,7 @@ static unsigned int it821x_smart_qc_issue_prot(struct ata_queued_cmd *qc) return ata_qc_issue_prot(qc); } printk(KERN_DEBUG "it821x: can't process command 0x%02X\n", qc->tf.command); - return AC_ERR_INVALID; + return AC_ERR_DEV; } /** @@ -516,6 +516,37 @@ static void it821x_dev_config(struct ata_device *adev) printk("(%dK stripe)", adev->id[146]); printk(".\n"); } + /* This is a controller firmware triggered funny, don't + report the drive faulty! */ + adev->horkage &= ~ATA_HORKAGE_DIAGNOSTIC; +} + +/** + * it821x_ident_hack - Hack identify data up + * @ap: Port + * + * Walk the devices on this firmware driven port and slightly + * mash the identify data to stop us and common tools trying to + * use features not firmware supported. The firmware itself does + * some masking (eg SMART) but not enough. + * + * This is a bit of an abuse of the cable method, but it is the + * only method called at the right time. We could modify the libata + * core specifically for ident hacking but while we have one offender + * it seems better to keep the fallout localised. + */ + +static int it821x_ident_hack(struct ata_port *ap) +{ + struct ata_device *adev; + ata_link_for_each_dev(adev, &ap->link) { + if (ata_dev_enabled(adev)) { + adev->id[84] &= ~(1 << 6); /* No FUA */ + adev->id[85] &= ~(1 << 10); /* No HPA */ + adev->id[76] = 0; /* No NCQ/AN etc */ + } + } + return ata_cable_unknown(ap); } @@ -634,7 +665,7 @@ static struct ata_port_operations it821x_smart_port_ops = { .thaw = ata_bmdma_thaw, .error_handler = ata_bmdma_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, - .cable_detect = ata_cable_unknown, + .cable_detect = it821x_ident_hack, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, |