summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arc/Kconfig1
-rw-r--r--arch/cris/arch-v32/drivers/Kconfig2
-rw-r--r--drivers/misc/mic/Kconfig2
-rw-r--r--drivers/staging/android/Kconfig2
-rw-r--r--drivers/staging/bcm/Kconfig1
-rw-r--r--drivers/staging/frontier/Kconfig1
-rw-r--r--drivers/staging/media/go7007/Kconfig3
-rw-r--r--drivers/staging/rtl8187se/Kconfig1
-rw-r--r--drivers/staging/rtl8188eu/Kconfig1
-rw-r--r--drivers/staging/rtl8192e/rtl8192e/Kconfig1
-rw-r--r--drivers/staging/rtl8192u/Kconfig1
-rw-r--r--drivers/staging/rtl8712/Kconfig2
-rw-r--r--drivers/staging/usbip/Kconfig4
-rw-r--r--drivers/usb/core/Kconfig1
-rw-r--r--drivers/usb/host/Kconfig3
15 files changed, 0 insertions, 26 deletions
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 9063ae6553c..3d7f1137a21 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -356,7 +356,6 @@ config ARC_CURR_IN_REG
config ARC_MISALIGN_ACCESS
bool "Emulate unaligned memory access (userspace only)"
- default N
select SYSCTL_ARCH_UNALIGN_NO_WARN
select SYSCTL_ARCH_UNALIGN_ALLOW
help
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index 6792503aaf7..15a9ed1d579 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -11,7 +11,6 @@ config ETRAX_ETHERNET
config ETRAX_NO_PHY
bool "PHY not present"
depends on ETRAX_ETHERNET
- default N
help
This option disables all MDIO communication with an ethernet
transceiver connected to the MII interface. This option shall
@@ -116,7 +115,6 @@ config ETRAX_AXISFLASHMAP
config ETRAX_AXISFLASHMAP_MTD0WHOLE
bool "MTD0 is whole boot flash device"
depends on ETRAX_AXISFLASHMAP
- default N
help
When this option is not set, mtd0 refers to the first partition
on the boot flash device. When set, mtd0 refers to the whole
diff --git a/drivers/misc/mic/Kconfig b/drivers/misc/mic/Kconfig
index e42b331edbc..462a5b1d865 100644
--- a/drivers/misc/mic/Kconfig
+++ b/drivers/misc/mic/Kconfig
@@ -4,7 +4,6 @@ config INTEL_MIC_HOST
tristate "Intel MIC Host Driver"
depends on 64BIT && PCI && X86
select VHOST_RING
- default N
help
This enables Host Driver support for the Intel Many Integrated
Core (MIC) family of PCIe form factor coprocessor devices that
@@ -25,7 +24,6 @@ config INTEL_MIC_CARD
tristate "Intel MIC Card Driver"
depends on 64BIT && X86
select VIRTIO
- default N
help
This enables card driver support for the Intel Many Integrated
Core (MIC) device family. The card driver communicates shutdown/
diff --git a/drivers/staging/android/Kconfig b/drivers/staging/android/Kconfig
index 1e9ab6dfc90..22cf17dcb7d 100644
--- a/drivers/staging/android/Kconfig
+++ b/drivers/staging/android/Kconfig
@@ -2,7 +2,6 @@ menu "Android"
config ANDROID
bool "Android Drivers"
- default N
---help---
Enable support for various drivers needed on the Android platform
@@ -60,7 +59,6 @@ config ANDROID_TIMED_GPIO
config ANDROID_LOW_MEMORY_KILLER
bool "Android Low Memory Killer"
- default N
---help---
Registers processes to be killed when memory is low
diff --git a/drivers/staging/bcm/Kconfig b/drivers/staging/bcm/Kconfig
index 83c9752504d..8acf4b24a7c 100644
--- a/drivers/staging/bcm/Kconfig
+++ b/drivers/staging/bcm/Kconfig
@@ -1,7 +1,6 @@
config BCM_WIMAX
tristate "Beceem BCS200/BCS220-3 and BCSM250 wimax support"
depends on USB && NET
- default N
help
This is an experimental driver for the Beceem WIMAX chipset used
by Sprint 4G.
diff --git a/drivers/staging/frontier/Kconfig b/drivers/staging/frontier/Kconfig
index 7121853bd39..4da290b2f5b 100644
--- a/drivers/staging/frontier/Kconfig
+++ b/drivers/staging/frontier/Kconfig
@@ -1,6 +1,5 @@
config TRANZPORT
tristate "Frontier Tranzport and Alphatrack support"
depends on USB
- default N
---help---
Enable support for the Frontier Tranzport and Alphatrack devices.
diff --git a/drivers/staging/media/go7007/Kconfig b/drivers/staging/media/go7007/Kconfig
index 04bd0fba7b1..95a3af644a9 100644
--- a/drivers/staging/media/go7007/Kconfig
+++ b/drivers/staging/media/go7007/Kconfig
@@ -13,7 +13,6 @@ config VIDEO_GO7007
select VIDEO_TW9906 if MEDIA_SUBDRV_AUTOSELECT
select VIDEO_OV7640 if MEDIA_SUBDRV_AUTOSELECT
select VIDEO_UDA1342 if MEDIA_SUBDRV_AUTOSELECT
- default N
---help---
This is a video4linux driver for the WIS GO7007 MPEG
encoder chip.
@@ -24,7 +23,6 @@ config VIDEO_GO7007
config VIDEO_GO7007_USB
tristate "WIS GO7007 USB support"
depends on VIDEO_GO7007 && USB
- default N
---help---
This is a video4linux driver for the WIS GO7007 MPEG
encoder chip over USB.
@@ -46,7 +44,6 @@ config VIDEO_GO7007_LOADER
config VIDEO_GO7007_USB_S2250_BOARD
tristate "Sensoray 2250/2251 support"
depends on VIDEO_GO7007_USB && USB
- default N
---help---
This is a video4linux driver for the Sensoray 2250/2251 device.
diff --git a/drivers/staging/rtl8187se/Kconfig b/drivers/staging/rtl8187se/Kconfig
index 3162aabbeb0..ff8d41ebca3 100644
--- a/drivers/staging/rtl8187se/Kconfig
+++ b/drivers/staging/rtl8187se/Kconfig
@@ -6,6 +6,5 @@ config R8187SE
select WEXT_PRIV
select EEPROM_93CX6
select CRYPTO
- default N
---help---
If built as a module, it will be called r8187se.ko.
diff --git a/drivers/staging/rtl8188eu/Kconfig b/drivers/staging/rtl8188eu/Kconfig
index c9c548f1749..70fecfabc0c 100644
--- a/drivers/staging/rtl8188eu/Kconfig
+++ b/drivers/staging/rtl8188eu/Kconfig
@@ -3,7 +3,6 @@ config R8188EU
depends on WLAN && USB
select WIRELESS_EXT
select WEXT_PRIV
- default N
---help---
This option adds the Realtek RTL8188EU USB device such as TP-Link TL-WN725N.
If built as a module, it will be called r8188eu.
diff --git a/drivers/staging/rtl8192e/rtl8192e/Kconfig b/drivers/staging/rtl8192e/rtl8192e/Kconfig
index 50e0d91a409..ad82bc348a7 100644
--- a/drivers/staging/rtl8192e/rtl8192e/Kconfig
+++ b/drivers/staging/rtl8192e/rtl8192e/Kconfig
@@ -5,5 +5,4 @@ config RTL8192E
select WIRELESS_EXT
select WEXT_PRIV
select CRYPTO
- default N
---help---
diff --git a/drivers/staging/rtl8192u/Kconfig b/drivers/staging/rtl8192u/Kconfig
index 3f055091b35..3ee9d0d00fb 100644
--- a/drivers/staging/rtl8192u/Kconfig
+++ b/drivers/staging/rtl8192u/Kconfig
@@ -5,5 +5,4 @@ config RTL8192U
select WIRELESS_EXT
select WEXT_PRIV
select CRYPTO
- default N
---help---
diff --git a/drivers/staging/rtl8712/Kconfig b/drivers/staging/rtl8712/Kconfig
index 6a43312380e..f160eee52f0 100644
--- a/drivers/staging/rtl8712/Kconfig
+++ b/drivers/staging/rtl8712/Kconfig
@@ -4,7 +4,6 @@ config R8712U
select WIRELESS_EXT
select WEXT_PRIV
select FW_LOADER
- default N
---help---
This option adds the Realtek RTL8712 USB device such as the D-Link DWA-130.
If built as a module, it will be called r8712u.
@@ -12,7 +11,6 @@ config R8712U
config R8712_TX_AGGR
bool "Realtek RTL8712U Transmit Aggregation code"
depends on R8712U && BROKEN
- default N
---help---
This option provides transmit aggregation for the Realtek RTL8712 USB device.
diff --git a/drivers/staging/usbip/Kconfig b/drivers/staging/usbip/Kconfig
index 88600098047..bd99e9e47e5 100644
--- a/drivers/staging/usbip/Kconfig
+++ b/drivers/staging/usbip/Kconfig
@@ -1,7 +1,6 @@
config USBIP_CORE
tristate "USB/IP support"
depends on USB && NET
- default N
---help---
This enables pushing USB packets over IP to allow remote
machines direct access to USB devices. It provides the
@@ -18,7 +17,6 @@ config USBIP_CORE
config USBIP_VHCI_HCD
tristate "VHCI hcd"
depends on USBIP_CORE
- default N
---help---
This enables the USB/IP virtual host controller driver,
which is run on the remote machine.
@@ -29,7 +27,6 @@ config USBIP_VHCI_HCD
config USBIP_HOST
tristate "Host driver"
depends on USBIP_CORE
- default N
---help---
This enables the USB/IP host driver, which is run on the
machine that is sharing the USB devices.
@@ -40,6 +37,5 @@ config USBIP_HOST
config USBIP_DEBUG
bool "Debug messages for USB/IP"
depends on USBIP_CORE
- default N
---help---
This enables the debug messages from the USB/IP drivers.
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index fed7f68d025..cb8e99156f5 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -10,7 +10,6 @@ config USB_DEBUG
config USB_ANNOUNCE_NEW_DEVICES
bool "USB announce new devices"
- default N
help
Say Y here if you want the USB core to always announce the
idVendor, idProduct, Manufacturer, Product, and SerialNumber
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index a9707da7da0..c8b4161613c 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -314,7 +314,6 @@ config USB_ISP1760_HCD
config USB_ISP1362_HCD
tristate "ISP1362 HCD support"
- default N
---help---
Supports the Philips ISP1362 chip as a host controller
@@ -326,7 +325,6 @@ config USB_ISP1362_HCD
config USB_FUSBH200_HCD
tristate "FUSBH200 HCD support"
depends on USB
- default N
---help---
Faraday FUSBH200 is designed to meet USB2.0 EHCI specification
with minor modification.
@@ -337,7 +335,6 @@ config USB_FUSBH200_HCD
config USB_FOTG210_HCD
tristate "FOTG210 HCD support"
depends on USB
- default N
---help---
Faraday FOTG210 is an OTG controller which can be configured as
an USB2.0 host. It is designed to meet USB2.0 EHCI specification
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-18 16:09:14 +0000