diff options
| -rw-r--r-- | arch/powerpc/Kconfig.debug | 31 | ||||
| -rw-r--r-- | arch/powerpc/include/asm/opal.h | 5 | ||||
| -rw-r--r-- | arch/powerpc/include/asm/udbg.h | 2 | ||||
| -rw-r--r-- | arch/powerpc/kernel/head_64.S | 14 | ||||
| -rw-r--r-- | arch/powerpc/kernel/udbg.c | 4 | ||||
| -rw-r--r-- | arch/powerpc/platforms/powernv/opal.c | 31 | ||||
| -rw-r--r-- | arch/powerpc/platforms/powernv/setup.c | 14 | ||||
| -rw-r--r-- | drivers/tty/hvc/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/tty/hvc/Makefile | 1 | ||||
| -rw-r--r-- | drivers/tty/hvc/hvc_opal.c | 424 | ||||
| -rw-r--r-- | drivers/tty/hvc/hvsi_lib.c | 4 |
11 files changed, 517 insertions, 22 deletions
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index 06eb62b0fd9..1b8a9c905cf 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -265,8 +265,27 @@ config PPC_EARLY_DEBUG_PS3GELIC Select this to enable early debugging for the PlayStation3 via UDP broadcasts sent out through the Ethernet port. +config PPC_EARLY_DEBUG_OPAL_RAW + bool "OPAL raw console" + depends on HVC_OPAL + help + Select this to enable early debugging for the PowerNV platform + using a "raw" console + +config PPC_EARLY_DEBUG_OPAL_HVSI + bool "OPAL hvsi console" + depends on HVC_OPAL + help + Select this to enable early debugging for the PowerNV platform + using an "hvsi" console + endchoice +config PPC_EARLY_DEBUG_OPAL + def_bool y + depends on PPC_EARLY_DEBUG_OPAL_RAW || PPC_EARLY_DEBUG_OPAL_HVSI + + config PPC_EARLY_DEBUG_HVSI_VTERMNO hex "vterm number to use with early debug HVSI" depends on PPC_EARLY_DEBUG_LPAR_HVSI @@ -275,6 +294,18 @@ config PPC_EARLY_DEBUG_HVSI_VTERMNO You probably want 0x30000000 for your first serial port and 0x30000001 for your second one +config PPC_EARLY_DEBUG_OPAL_VTERMNO + hex "vterm number to use with OPAL early debug" + depends on PPC_EARLY_DEBUG_OPAL + default "0" + help + This correspond to which /dev/hvcN you want to use for early + debug. + + On OPAL v1 (takeover) this should always be 0 + On OPAL v2, this will be 0 for network console and 1 or 2 for + the machine built-in serial ports. + config PPC_EARLY_DEBUG_44x_PHYSLOW hex "Low 32 bits of early debug UART physical address" depends on PPC_EARLY_DEBUG_44x diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h index c7a3202d10a..749de00a02d 100644 --- a/arch/powerpc/include/asm/opal.h +++ b/arch/powerpc/include/asm/opal.h @@ -425,6 +425,11 @@ extern void hvc_opal_init_early(void); extern int early_init_dt_scan_opal(unsigned long node, const char *uname, int depth, void *data); +extern int opal_get_chars(uint32_t vtermno, char *buf, int count); +extern int opal_put_chars(uint32_t vtermno, const char *buf, int total_len); + +extern void hvc_opal_init_early(void); + #endif /* __ASSEMBLY__ */ #endif /* __OPAL_H */ diff --git a/arch/powerpc/include/asm/udbg.h b/arch/powerpc/include/asm/udbg.h index 7cf796fa03f..6587ec7bc6e 100644 --- a/arch/powerpc/include/asm/udbg.h +++ b/arch/powerpc/include/asm/udbg.h @@ -55,6 +55,8 @@ extern void __init udbg_init_cpm(void); extern void __init udbg_init_usbgecko(void); extern void __init udbg_init_wsp(void); extern void __init udbg_init_ps3gelic(void); +extern void __init udbg_init_debug_opal_raw(void); +extern void __init udbg_init_debug_opal_hvsi(void); #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_UDBG_H */ diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index dea8191253d..06c7251c1bf 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -53,7 +53,8 @@ * 2. The kernel is entered at __start * -or- For OPAL entry: * 1. The MMU is off, processor in HV mode, primary CPU enters at 0 - * with device-tree in gpr3 + * with device-tree in gpr3. We also get OPAL base in r8 and + * entry in r9 for debugging purposes * 2. Secondary processors enter at 0x60 with PIR in gpr3 * * For iSeries: @@ -335,6 +336,11 @@ _GLOBAL(__start_initialization_multiplatform) /* Save parameters */ mr r31,r3 mr r30,r4 +#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL + /* Save OPAL entry */ + mr r28,r8 + mr r29,r9 +#endif #ifdef CONFIG_PPC_BOOK3E bl .start_initialization_book3e @@ -711,6 +717,12 @@ _INIT_STATIC(start_here_multiplatform) bdnz 3b 4: +#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL + /* Setup OPAL entry */ + std r28,0(r11); + std r29,8(r11); +#endif + #ifndef CONFIG_PPC_BOOK3E mfmsr r6 ori r6,r6,MSR_RI diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c index 5b3e98e0315..35f948203ec 100644 --- a/arch/powerpc/kernel/udbg.c +++ b/arch/powerpc/kernel/udbg.c @@ -69,6 +69,10 @@ void __init udbg_early_init(void) udbg_init_wsp(); #elif defined(CONFIG_PPC_EARLY_DEBUG_PS3GELIC) udbg_init_ps3gelic(); +#elif defined(CONFIG_PPC_EARLY_DEBUG_OPAL_RAW) + udbg_init_debug_opal_raw(); +#elif defined(CONFIG_PPC_EARLY_DEBUG_OPAL_HVSI) + udbg_init_debug_opal_hvsi(); #endif #ifdef CONFIG_PPC_EARLY_DEBUG diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c index 8d5510784cc..7887733b9b3 100644 --- a/arch/powerpc/platforms/powernv/opal.c +++ b/arch/powerpc/platforms/powernv/opal.c @@ -67,7 +67,7 @@ int opal_get_chars(uint32_t vtermno, char *buf, int count) u64 evt; if (!opal.entry) - return 0; + return -ENODEV; opal_poll_events(&evt); if ((evt & OPAL_EVENT_CONSOLE_INPUT) == 0) return 0; @@ -81,31 +81,38 @@ int opal_get_chars(uint32_t vtermno, char *buf, int count) int opal_put_chars(uint32_t vtermno, const char *data, int total_len) { int written = 0; - s64 len, rc = OPAL_BUSY; + s64 len, rc; unsigned long flags; u64 evt; if (!opal.entry) - return 0; + return -ENODEV; /* We want put_chars to be atomic to avoid mangling of hvsi * packets. To do that, we first test for room and return - * -EAGAIN if there isn't enough + * -EAGAIN if there isn't enough. + * + * Unfortunately, opal_console_write_buffer_space() doesn't + * appear to work on opal v1, so we just assume there is + * enough room and be done with it */ spin_lock_irqsave(&opal_write_lock, flags); - rc = opal_console_write_buffer_space(vtermno, &len); - if (rc || len < total_len) { - spin_unlock_irqrestore(&opal_write_lock, flags); - /* Closed -> drop characters */ - if (rc) - return total_len; - opal_poll_events(&evt); - return -EAGAIN; + if (firmware_has_feature(FW_FEATURE_OPALv2)) { + rc = opal_console_write_buffer_space(vtermno, &len); + if (rc || len < total_len) { + spin_unlock_irqrestore(&opal_write_lock, flags); + /* Closed -> drop characters */ + if (rc) + return total_len; + opal_poll_events(&evt); + return -EAGAIN; + } } /* We still try to handle partial completions, though they * should no longer happen. */ + rc = OPAL_BUSY; while(total_len > 0 && (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT || rc == OPAL_SUCCESS)) { len = total_len; diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c index b6e5ff85cc6..07ba1ecd180 100644 --- a/arch/powerpc/platforms/powernv/setup.c +++ b/arch/powerpc/platforms/powernv/setup.c @@ -29,17 +29,12 @@ #include <asm/machdep.h> #include <asm/firmware.h> #include <asm/xics.h> +#include <asm/opal.h> #include "powernv.h" static void __init pnv_setup_arch(void) { - /* Force console to hvc for now until we have sorted out the - * real console situation for the platform. This will make - * hvc_udbg work at least. - */ - add_preferred_console("hvc", 0, NULL); - /* Initialize SMP */ pnv_smp_init(); @@ -55,7 +50,12 @@ static void __init pnv_setup_arch(void) static void __init pnv_init_early(void) { - /* XXX IOMMU */ +#ifdef CONFIG_HVC_OPAL + if (firmware_has_feature(FW_FEATURE_OPAL)) + hvc_opal_init_early(); + else +#endif + add_preferred_console("hvc", 0, NULL); } static void __init pnv_init_IRQ(void) diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig index e371753ba92..4222035acfb 100644 --- a/drivers/tty/hvc/Kconfig +++ b/drivers/tty/hvc/Kconfig @@ -34,6 +34,15 @@ config HVC_ISERIES help iSeries machines support a hypervisor virtual console. +config HVC_OPAL + bool "OPAL Console support" + depends on PPC_POWERNV + select HVC_DRIVER + select HVC_IRQ + default y + help + PowerNV machines running under OPAL need that driver to get a console + config HVC_RTAS bool "IBM RTAS Console support" depends on PPC_RTAS diff --git a/drivers/tty/hvc/Makefile b/drivers/tty/hvc/Makefile index e2920531637..89abf40bc73 100644 --- a/drivers/tty/hvc/Makefile +++ b/drivers/tty/hvc/Makefile @@ -1,4 +1,5 @@ obj-$(CONFIG_HVC_CONSOLE) += hvc_vio.o hvsi_lib.o +obj-$(CONFIG_HVC_OPAL) += hvc_opal.o hvsi_lib.o obj-$(CONFIG_HVC_OLD_HVSI) += hvsi.o obj-$(CONFIG_HVC_ISERIES) += hvc_iseries.o obj-$(CONFIG_HVC_RTAS) += hvc_rtas.o diff --git a/drivers/tty/hvc/hvc_opal.c b/drivers/tty/hvc/hvc_opal.c new file mode 100644 index 00000000000..7b38512d6c4 --- /dev/null +++ b/drivers/tty/hvc/hvc_opal.c @@ -0,0 +1,424 @@ +/* + * opal driver interface to hvc_console.c + * + * Copyright 2011 Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#undef DEBUG + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/console.h> +#include <linux/of.h> +#include <linux/of_platform.h> + +#include <asm/hvconsole.h> +#include <asm/prom.h> +#include <asm/firmware.h> +#include <asm/hvsi.h> +#include <asm/udbg.h> +#include <asm/opal.h> + +#include "hvc_console.h" + +static const char hvc_opal_name[] = "hvc_opal"; + +static struct of_device_id hvc_opal_match[] __devinitdata = { + { .name = "serial", .compatible = "ibm,opal-console-raw" }, + { .name = "serial", .compatible = "ibm,opal-console-hvsi" }, + { }, +}; + +typedef enum hv_protocol { + HV_PROTOCOL_RAW, + HV_PROTOCOL_HVSI +} hv_protocol_t; + +struct hvc_opal_priv { + hv_protocol_t proto; /* Raw data or HVSI packets */ + struct hvsi_priv hvsi; /* HVSI specific data */ +}; +static struct hvc_opal_priv *hvc_opal_privs[MAX_NR_HVC_CONSOLES]; + +/* For early boot console */ +static struct hvc_opal_priv hvc_opal_boot_priv; +static u32 hvc_opal_boot_termno; + +static const struct hv_ops hvc_opal_raw_ops = { + .get_chars = opal_get_chars, + .put_chars = opal_put_chars, + .notifier_add = notifier_add_irq, + .notifier_del = notifier_del_irq, + .notifier_hangup = notifier_hangup_irq, +}; + +static int hvc_opal_hvsi_get_chars(uint32_t vtermno, char *buf, int count) +{ + struct hvc_opal_priv *pv = hvc_opal_privs[vtermno]; + + if (WARN_ON(!pv)) + return -ENODEV; + + return hvsilib_get_chars(&pv->hvsi, buf, count); +} + +static int hvc_opal_hvsi_put_chars(uint32_t vtermno, const char *buf, int count) +{ + struct hvc_opal_priv *pv = hvc_opal_privs[vtermno]; + + if (WARN_ON(!pv)) + return -ENODEV; + + return hvsilib_put_chars(&pv->hvsi, buf, count); +} + +static int hvc_opal_hvsi_open(struct hvc_struct *hp, int data) +{ + struct hvc_opal_priv *pv = hvc_opal_privs[hp->vtermno]; + int rc; + + pr_devel("HVSI@%x: do open !\n", hp->vtermno); + + rc = notifier_add_irq(hp, data); + if (rc) + return rc; + + return hvsilib_open(&pv->hvsi, hp); +} + +static void hvc_opal_hvsi_close(struct hvc_struct *hp, int data) +{ + struct hvc_opal_priv *pv = hvc_opal_privs[hp->vtermno]; + + pr_devel("HVSI@%x: do close !\n", hp->vtermno); + + hvsilib_close(&pv->hvsi, hp); + + notifier_del_irq(hp, data); +} + +void hvc_opal_hvsi_hangup(struct hvc_struct *hp, int data) +{ + struct hvc_opal_priv *pv = hvc_opal_privs[hp->vtermno]; + + pr_devel("HVSI@%x: do hangup !\n", hp->vtermno); + + hvsilib_close(&pv->hvsi, hp); + + notifier_hangup_irq(hp, data); +} + +static int hvc_opal_hvsi_tiocmget(struct hvc_struct *hp) +{ + struct hvc_opal_priv *pv = hvc_opal_privs[hp->vtermno]; + + if (!pv) + return -EINVAL; + return pv->hvsi.mctrl; +} + +static int hvc_opal_hvsi_tiocmset(struct hvc_struct *hp, unsigned int set, + unsigned int clear) +{ + struct hvc_opal_priv *pv = hvc_opal_privs[hp->vtermno]; + + pr_devel("HVSI@%x: Set modem control, set=%x,clr=%x\n", + hp->vtermno, set, clear); + + if (set & TIOCM_DTR) + hvsilib_write_mctrl(&pv->hvsi, 1); + else if (clear & TIOCM_DTR) + hvsilib_write_mctrl(&pv->hvsi, 0); + + return 0; +} + +static const struct hv_ops hvc_opal_hvsi_ops = { + .get_chars = hvc_opal_hvsi_get_chars, + .put_chars = hvc_opal_hvsi_put_chars, + .notifier_add = hvc_opal_hvsi_open, + .notifier_del = hvc_opal_hvsi_close, + .notifier_hangup = hvc_opal_hvsi_hangup, + .tiocmget = hvc_opal_hvsi_tiocmget, + .tiocmset = hvc_opal_hvsi_tiocmset, +}; + +static int __devinit hvc_opal_probe(struct platform_device *dev) +{ + const struct hv_ops *ops; + struct hvc_struct *hp; + struct hvc_opal_priv *pv; + hv_protocol_t proto; + unsigned int termno, boot = 0; + const __be32 *reg; + + if (of_device_is_compatible(dev->dev.of_node, "ibm,opal-console-raw")) { + proto = HV_PROTOCOL_RAW; + ops = &hvc_opal_raw_ops; + } else if (of_device_is_compatible(dev->dev.of_node, + "ibm,opal-console-hvsi")) { + proto = HV_PROTOCOL_HVSI; + ops = &hvc_opal_hvsi_ops; + } else { + pr_err("hvc_opal: Unkown protocol for %s\n", + dev->dev.of_node->full_name); + return -ENXIO; + } + + reg = of_get_property(dev->dev.of_node, "reg", NULL); + termno = reg ? be32_to_cpup(reg) : 0; + + /* Is it our boot one ? */ + if (hvc_opal_privs[termno] == &hvc_opal_boot_priv) { + pv = hvc_opal_privs[termno]; + boot = 1; + } else if (hvc_opal_privs[termno] == NULL) { + pv = kzalloc(sizeof(struct hvc_opal_priv), GFP_KERNEL); + if (!pv) + return -ENOMEM; + pv->proto = proto; + hvc_opal_privs[termno] = pv; + if (proto == HV_PROTOCOL_HVSI) + hvsilib_init(&pv->hvsi, opal_get_chars, opal_put_chars, + termno, 0); + + /* Instanciate now to establish a mapping index==vtermno */ + hvc_instantiate(termno, termno, ops); + } else { + pr_err("hvc_opal: Device %s has duplicate terminal number #%d\n", + dev->dev.of_node->full_name, termno); + return -ENXIO; + } + + pr_info("hvc%d: %s protocol on %s%s\n", termno, + proto == HV_PROTOCOL_RAW ? "raw" : "hvsi", + dev->dev.of_node->full_name, + boot ? " (boot console)" : ""); + + /* We don't do IRQ yet */ + hp = hvc_alloc(termno, 0, ops, MAX_VIO_PUT_CHARS); + if (IS_ERR(hp)) + return PTR_ERR(hp); + dev_set_drvdata(&dev->dev, hp); + + return 0; +} + +static int __devexit hvc_opal_remove(struct platform_device *dev) +{ + struct hvc_struct *hp = dev_get_drvdata(&dev->dev); + int rc, termno; + + termno = hp->vtermno; + rc = hvc_remove(hp); + if (rc == 0) { + if (hvc_opal_privs[termno] != &hvc_opal_boot_priv) + kfree(hvc_opal_privs[termno]); + hvc_opal_privs[termno] = NULL; + } + return rc; +} + +static struct platform_driver hvc_opal_driver = { + .probe = hvc_opal_probe, + .remove = __devexit_p(hvc_opal_remove), + .driver = { + .name = hvc_opal_name, + .owner = THIS_MODULE, + .of_match_table = hvc_opal_match, + } +}; + +static int __init hvc_opal_init(void) +{ + if (!firmware_has_feature(FW_FEATURE_OPAL)) + return -ENODEV; + + /* Register as a vio device to receive callbacks */ + return platform_driver_register(&hvc_opal_driver); +} +module_init(hvc_opal_init); + +static void __exit hvc_opal_exit(void) +{ + platform_driver_unregister(&hvc_opal_driver); +} +module_exit(hvc_opal_exit); + +static void udbg_opal_putc(char c) +{ + unsigned int termno = hvc_opal_boot_termno; + int count = -1; + + if (c == '\n') + udbg_opal_putc('\r'); + + do { + switch(hvc_opal_boot_priv.proto) { + case HV_PROTOCOL_RAW: + count = opal_put_chars(termno, &c, 1); + break; + case HV_PROTOCOL_HVSI: + count = hvc_opal_hvsi_put_chars(termno, &c, 1); + break; + } + } while(count == 0 || count == -EAGAIN); +} + +static int udbg_opal_getc_poll(void) +{ + unsigned int termno = hvc_opal_boot_termno; + int rc = 0; + char c; + + switch(hvc_opal_boot_priv.proto) { + case HV_PROTOCOL_RAW: + rc = opal_get_chars(termno, &c, 1); + break; + case HV_PROTOCOL_HVSI: + rc = hvc_opal_hvsi_get_chars(termno, &c, 1); + break; + } + if (!rc) + return -1; + return c; +} + +static int udbg_opal_getc(void) +{ + int ch; + for (;;) { + ch = udbg_opal_getc_poll(); + if (ch == -1) { + /* This shouldn't be needed...but... */ + volatile unsigned long delay; + for (delay=0; delay < 2000000; delay++) + ; + } else { + return ch; + } + } +} + +static void udbg_init_opal_common(void) +{ + udbg_putc = udbg_opal_putc; + udbg_getc = udbg_opal_getc; + udbg_getc_poll = udbg_opal_getc_poll; + tb_ticks_per_usec = 0x200; /* Make udelay not suck */ +} + +void __init hvc_opal_init_early(void) +{ + struct device_node *stdout_node = NULL; + const u32 *termno; + const char *name = NULL; + const struct hv_ops *ops; + u32 index; + + /* find the boot console from /chosen/stdout */ + if (of_chosen) + name = of_get_property(of_chosen, "linux,stdout-path", NULL); + if (name) { + stdout_node = of_find_node_by_path(name); + if (!stdout_node) { + pr_err("hvc_opal: Failed to locate default console!\n"); + return; + } + } else { + struct device_node *opal, *np; + + /* Current OPAL takeover doesn't provide the stdout + * path, so we hard wire it + */ + opal = of_find_node_by_path("/ibm,opal/consoles"); + if (opal) + pr_devel("hvc_opal: Found consoles in new location\n"); + if (!opal) { + opal = of_find_node_by_path("/ibm,opal"); + if (opal) + pr_devel("hvc_opal: " + "Found consoles in old location\n"); + } + if (!opal) + return; + for_each_child_of_node(opal, np) { + if (!strcmp(np->name, "serial")) { + stdout_node = np; + break; + } + } + of_node_put(opal); + } + if (!stdout_node) + return; + termno = of_get_property(stdout_node, "reg", NULL); + index = termno ? *termno : 0; + if (index >= MAX_NR_HVC_CONSOLES) + return; + hvc_opal_privs[index] = &hvc_opal_boot_priv; + + /* Check the protocol */ + if (of_device_is_compatible(stdout_node, "ibm,opal-console-raw")) { + hvc_opal_boot_priv.proto = HV_PROTOCOL_RAW; + ops = &hvc_opal_raw_ops; + pr_devel("hvc_opal: Found RAW console\n"); + } + else if (of_device_is_compatible(stdout_node,"ibm,opal-console-hvsi")) { + hvc_opal_boot_priv.proto = HV_PROTOCOL_HVSI; + ops = &hvc_opal_hvsi_ops; + hvsilib_init(&hvc_opal_boot_priv.hvsi, opal_get_chars, + opal_put_chars, index, 1); + /* HVSI, perform the handshake now */ + hvsilib_establish(&hvc_opal_boot_priv.hvsi); + pr_devel("hvc_opal: Found HVSI console\n"); + } else + goto out; + hvc_opal_boot_termno = index; + udbg_init_opal_common(); + add_preferred_console("hvc", index, NULL); + hvc_instantiate(index, index, ops); +out: + of_node_put(stdout_node); +} + +#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL_RAW +void __init udbg_init_debug_opal(void) +{ + u32 index = CONFIG_PPC_EARLY_DEBUG_OPAL_VTERMNO; + hvc_opal_privs[index] = &hvc_opal_boot_priv; + hvc_opal_boot_priv.proto = HV_PROTOCOL_RAW; + hvc_opal_boot_termno = index; + udbg_init_opal_common(); +} +#endif /* CONFIG_PPC_EARLY_DEBUG_OPAL_RAW */ + +#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL_HVSI +void __init udbg_init_debug_opal_hvsi(void) +{ + u32 index = CONFIG_PPC_EARLY_DEBUG_OPAL_VTERMNO; + hvc_opal_privs[index] = &hvc_opal_boot_priv; + hvc_opal_boot_termno = index; + udbg_init_opal_common(); + hvsilib_init(&hvc_opal_boot_priv.hvsi, opal_get_chars, opal_put_chars, + index, 1); + hvsilib_establish(&hvc_opal_boot_priv.hvsi); +} +#endif /* CONFIG_PPC_EARLY_DEBUG_OPAL_HVSI */ diff --git a/drivers/tty/hvc/hvsi_lib.c b/drivers/tty/hvc/hvsi_lib.c index bd9b09827b2..6f4dd83d869 100644 --- a/drivers/tty/hvc/hvsi_lib.c +++ b/drivers/tty/hvc/hvsi_lib.c @@ -183,7 +183,7 @@ int hvsilib_get_chars(struct hvsi_priv *pv, char *buf, int count) unsigned int tries, read = 0; if (WARN_ON(!pv)) - return 0; + return -ENXIO; /* If we aren't open, don't do anything in order to avoid races * with connection establishment. The hvc core will call this @@ -234,7 +234,7 @@ int hvsilib_put_chars(struct hvsi_priv *pv, const char *buf, int count) int rc, adjcount = min(count, HVSI_MAX_OUTGOING_DATA); if (WARN_ON(!pv)) - return 0; + return -ENODEV; dp.hdr.type = VS_DATA_PACKET_HEADER; dp.hdr.len = adjcount + sizeof(struct hvsi_header); |