summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/mn10300/kernel/asm-offsets.c6
-rw-r--r--drivers/char/cyclades.c2311
-rw-r--r--drivers/char/esp.c7
-rw-r--r--drivers/char/isicom.c57
-rw-r--r--drivers/char/mxser.c62
-rw-r--r--drivers/char/n_tty.c79
-rw-r--r--drivers/char/riscom8.c164
-rw-r--r--drivers/char/tty_io.c22
-rw-r--r--drivers/char/tty_ioctl.c4
-rw-r--r--drivers/char/tty_ldisc.c82
-rw-r--r--drivers/char/tty_port.c31
-rw-r--r--drivers/char/vt.c14
-rw-r--r--drivers/char/vt_ioctl.c482
-rw-r--r--drivers/isdn/gigaset/interface.c19
-rw-r--r--drivers/net/slip.c96
-rw-r--r--drivers/serial/21285.c8
-rw-r--r--drivers/serial/8250.c28
-rw-r--r--drivers/serial/8250.h1
-rw-r--r--drivers/serial/amba-pl010.c6
-rw-r--r--drivers/serial/amba-pl011.c6
-rw-r--r--drivers/serial/atmel_serial.c14
-rw-r--r--drivers/serial/bfin_5xx.c24
-rw-r--r--drivers/serial/bfin_sport_uart.c6
-rw-r--r--drivers/serial/clps711x.c4
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_core.c2
-rw-r--r--drivers/serial/dz.c6
-rw-r--r--drivers/serial/icom.c20
-rw-r--r--drivers/serial/imx.c16
-rw-r--r--drivers/serial/ioc3_serial.c54
-rw-r--r--drivers/serial/ioc4_serial.c68
-rw-r--r--drivers/serial/ip22zilog.c14
-rw-r--r--drivers/serial/jsm/jsm_neo.c2
-rw-r--r--drivers/serial/jsm/jsm_tty.c20
-rw-r--r--drivers/serial/m32r_sio.c6
-rw-r--r--drivers/serial/max3100.c16
-rw-r--r--drivers/serial/mcf.c4
-rw-r--r--drivers/serial/mpc52xx_uart.c4
-rw-r--r--drivers/serial/mpsc.c4
-rw-r--r--drivers/serial/msm_serial.c6
-rw-r--r--drivers/serial/mux.c4
-rw-r--r--drivers/serial/netx-serial.c6
-rw-r--r--drivers/serial/nwpserial.c4
-rw-r--r--drivers/serial/pmac_zilog.c20
-rw-r--r--drivers/serial/pnx8xxx_uart.c8
-rw-r--r--drivers/serial/pxa.c6
-rw-r--r--drivers/serial/sa1100.c8
-rw-r--r--drivers/serial/samsung.c8
-rw-r--r--drivers/serial/sb1250-duart.c6
-rw-r--r--drivers/serial/sc26xx.c10
-rw-r--r--drivers/serial/serial_core.c876
-rw-r--r--drivers/serial/serial_cs.c1
-rw-r--r--drivers/serial/serial_ks8695.c6
-rw-r--r--drivers/serial/serial_lh7a40x.c6
-rw-r--r--drivers/serial/serial_txx9.c4
-rw-r--r--drivers/serial/sh-sci.c10
-rw-r--r--drivers/serial/sn_console.c22
-rw-r--r--drivers/serial/sunhv.c8
-rw-r--r--drivers/serial/sunsab.c10
-rw-r--r--drivers/serial/sunsu.c6
-rw-r--r--drivers/serial/sunzilog.c14
-rw-r--r--drivers/serial/timbuart.c10
-rw-r--r--drivers/serial/uartlite.c19
-rw-r--r--drivers/serial/ucc_uart.c4
-rw-r--r--drivers/serial/vr41xx_siu.c6
-rw-r--r--drivers/serial/zs.c6
-rw-r--r--drivers/usb/class/cdc-acm.c5
-rw-r--r--drivers/usb/serial/ark3116.c51
-rw-r--r--drivers/usb/serial/belkin_sa.c4
-rw-r--r--drivers/usb/serial/ch341.c5
-rw-r--r--drivers/usb/serial/console.c32
-rw-r--r--drivers/usb/serial/cp210x.c12
-rw-r--r--drivers/usb/serial/cyberjack.c4
-rw-r--r--drivers/usb/serial/cypress_m8.c18
-rw-r--r--drivers/usb/serial/digi_acceleport.c6
-rw-r--r--drivers/usb/serial/empeg.c18
-rw-r--r--drivers/usb/serial/ftdi_sio.c6
-rw-r--r--drivers/usb/serial/garmin_gps.c3
-rw-r--r--drivers/usb/serial/generic.c3
-rw-r--r--drivers/usb/serial/io_edgeport.c6
-rw-r--r--drivers/usb/serial/io_ti.c3
-rw-r--r--drivers/usb/serial/ipaq.c9
-rw-r--r--drivers/usb/serial/ipw.c3
-rw-r--r--drivers/usb/serial/ir-usb.c6
-rw-r--r--drivers/usb/serial/iuu_phoenix.c34
-rw-r--r--drivers/usb/serial/keyspan.c3
-rw-r--r--drivers/usb/serial/keyspan.h3
-rw-r--r--drivers/usb/serial/keyspan_pda.c2
-rw-r--r--drivers/usb/serial/kl5kusb105.c10
-rw-r--r--drivers/usb/serial/kobil_sct.c28
-rw-r--r--drivers/usb/serial/mct_u232.c15
-rw-r--r--drivers/usb/serial/mos7720.c123
-rw-r--r--drivers/usb/serial/mos7840.c118
-rw-r--r--drivers/usb/serial/navman.c3
-rw-r--r--drivers/usb/serial/omninet.c6
-rw-r--r--drivers/usb/serial/opticon.c3
-rw-r--r--drivers/usb/serial/option.c6
-rw-r--r--drivers/usb/serial/oti6858.c27
-rw-r--r--drivers/usb/serial/pl2303.c5
-rw-r--r--drivers/usb/serial/sierra.c3
-rw-r--r--drivers/usb/serial/spcp8x5.c26
-rw-r--r--drivers/usb/serial/symbolserial.c3
-rw-r--r--drivers/usb/serial/ti_usb_3410_5052.c6
-rw-r--r--drivers/usb/serial/usb-serial.c385
-rw-r--r--drivers/usb/serial/usb_debug.c5
-rw-r--r--drivers/usb/serial/visor.c6
-rw-r--r--drivers/usb/serial/whiteheat.c11
-rw-r--r--include/linux/cyclades.h11
-rw-r--r--include/linux/hayesesp.h1
-rw-r--r--include/linux/kfifo.h4
-rw-r--r--include/linux/serial.h2
-rw-r--r--include/linux/serial_8250.h1
-rw-r--r--include/linux/serial_core.h93
-rw-r--r--include/linux/tty.h19
-rw-r--r--include/linux/usb/serial.h10
-rw-r--r--include/linux/vt.h32
-rw-r--r--include/linux/vt_kern.h16
-rw-r--r--kernel/kfifo.c2
-rw-r--r--kernel/power/console.c63
118 files changed, 2572 insertions, 3570 deletions
diff --git a/arch/mn10300/kernel/asm-offsets.c b/arch/mn10300/kernel/asm-offsets.c
index 2646fcbd7d8..82b40079ad7 100644
--- a/arch/mn10300/kernel/asm-offsets.c
+++ b/arch/mn10300/kernel/asm-offsets.c
@@ -95,7 +95,7 @@ void foo(void)
OFFSET(__iobase, mn10300_serial_port, _iobase);
DEFINE(__UART_XMIT_SIZE, UART_XMIT_SIZE);
- OFFSET(__xmit_buffer, uart_info, xmit.buf);
- OFFSET(__xmit_head, uart_info, xmit.head);
- OFFSET(__xmit_tail, uart_info, xmit.tail);
+ OFFSET(__xmit_buffer, uart_state, xmit.buf);
+ OFFSET(__xmit_head, uart_state, xmit.head);
+ OFFSET(__xmit_tail, uart_state, xmit.tail);
}
diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index 2dafc2da064..df5038bbcbc 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -11,7 +11,7 @@
* Initially written by Randolph Bentson <bentson@grieg.seaslug.org>.
* Modified and maintained by Marcio Saito <marcio@cyclades.com>.
*
- * Copyright (C) 2007 Jiri Slaby <jirislaby@gmail.com>
+ * Copyright (C) 2007-2009 Jiri Slaby <jirislaby@gmail.com>
*
* Much of the design and some of the code came from serial.c
* which was copyright (C) 1991, 1992 Linus Torvalds. It was
@@ -19,577 +19,9 @@
* and then fixed as suggested by Michael K. Johnson 12/12/92.
* Converted to pci probing and cleaned up by Jiri Slaby.
*
- * This version supports shared IRQ's (only for PCI boards).
- *
- * Prevent users from opening non-existing Z ports.
- *
- * Revision 2.3.2.8 2000/07/06 18:14:16 ivan
- * Fixed the PCI detection function to work properly on Alpha systems.
- * Implemented support for TIOCSERGETLSR ioctl.
- * Implemented full support for non-standard baud rates.
- *
- * Revision 2.3.2.7 2000/06/01 18:26:34 ivan
- * Request PLX I/O region, although driver doesn't use it, to avoid
- * problems with other drivers accessing it.
- * Removed count for on-board buffer characters in cy_chars_in_buffer
- * (Cyclades-Z only).
- *
- * Revision 2.3.2.6 2000/05/05 13:56:05 ivan
- * Driver now reports physical instead of virtual memory addresses.
- * Masks were added to some Cyclades-Z read accesses.
- * Implemented workaround for PLX9050 bug that would cause a system lockup
- * in certain systems, depending on the MMIO addresses allocated to the
- * board.
- * Changed the Tx interrupt programming in the CD1400 chips to boost up
- * performance (Cyclom-Y only).
- * Code is now compliant with the new module interface (module_[init|exit]).
- * Make use of the PCI helper functions to access PCI resources.
- * Did some code "housekeeping".
- *
- * Revision 2.3.2.5 2000/01/19 14:35:33 ivan
- * Fixed bug in cy_set_termios on CRTSCTS flag turnoff.
- *
- * Revision 2.3.2.4 2000/01/17 09:19:40 ivan
- * Fixed SMP locking in Cyclom-Y interrupt handler.
- *
- * Revision 2.3.2.3 1999/12/28 12:11:39 ivan
- * Added a new cyclades_card field called nports to allow the driver to
- * know the exact number of ports found by the Z firmware after its load;
- * RX buffer contention prevention logic on interrupt op mode revisited
- * (Cyclades-Z only);
- * Revisited printk's for Z debug;
- * Driver now makes sure that the constant SERIAL_XMIT_SIZE is defined;
- *
- * Revision 2.3.2.2 1999/10/01 11:27:43 ivan
- * Fixed bug in cyz_poll that would make all ports but port 0
- * unable to transmit/receive data (Cyclades-Z only);
- * Implemented logic to prevent the RX buffer from being stuck with data
- * due to a driver / firmware race condition in interrupt op mode
- * (Cyclades-Z only);
- * Fixed bug in block_til_ready logic that would lead to a system crash;
- * Revisited cy_close spinlock usage;
- *
- * Revision 2.3.2.1 1999/09/28 11:01:22 ivan
- * Revisited CONFIG_PCI conditional compilation for PCI board support;
- * Implemented TIOCGICOUNT and TIOCMIWAIT ioctl support;
- * _Major_ cleanup on the Cyclades-Z interrupt support code / logic;
- * Removed CTS handling from the driver -- this is now completely handled
- * by the firmware (Cyclades-Z only);
- * Flush RX on-board buffers on a port open (Cyclades-Z only);
- * Fixed handling of ASYNC_SPD_* TTY flags;
- * Module unload now unmaps all memory area allocated by ioremap;
- *
- * Revision 2.3.1.1 1999/07/15 16:45:53 ivan
- * Removed CY_PROC conditional compilation;
- * Implemented SMP-awareness for the driver;
- * Implemented a new ISA IRQ autoprobe that uses the irq_probe_[on|off]
- * functions;
- * The driver now accepts memory addresses (maddr=0xMMMMM) and IRQs
- * (irq=NN) as parameters (only for ISA boards);
- * Fixed bug in set_line_char that would prevent the Cyclades-Z
- * ports from being configured at speeds above 115.2Kbps;
- * Fixed bug in cy_set_termios that would prevent XON/XOFF flow control
- * switching from working properly;
- * The driver now only prints IRQ info for the Cyclades-Z if it's
- * configured to work in interrupt mode;
- *
- * Revision 2.2.2.3 1999/06/28 11:13:29 ivan
- * Added support for interrupt mode operation for the Z cards;
- * Removed the driver inactivity control for the Z;
- * Added a missing MOD_DEC_USE_COUNT in the cy_open function for when
- * the Z firmware is not loaded yet;
- * Replaced the "manual" Z Tx flush buffer by a call to a FW command of
- * same functionality;
- * Implemented workaround for IRQ setting loss on the PCI configuration
- * registers after a PCI bridge EEPROM reload (affects PLX9060 only);
- *
- * Revision 2.2.2.2 1999/05/14 17:18:15 ivan
- * /proc entry location changed to /proc/tty/driver/cyclades;
- * Added support to shared IRQ's (only for PCI boards);
- * Added support for Cobalt Qube2 systems;
- * IRQ [de]allocation scheme revisited;
- * BREAK implementation changed in order to make use of the 'break_ctl'
- * TTY facility;
- * Fixed typo in TTY structure field 'driver_name';
- * Included a PCI bridge reset and EEPROM reload in the board
- * initialization code (for both Y and Z series).
- *
- * Revision 2.2.2.1 1999/04/08 16:17:43 ivan
- * Fixed a bug in cy_wait_until_sent that was preventing the port to be
- * closed properly after a SIGINT;
- * Module usage counter scheme revisited;
- * Added support to the upcoming Y PCI boards (i.e., support to additional
- * PCI Device ID's).
- *
- * Revision 2.2.1.10 1999/01/20 16:14:29 ivan
- * Removed all unnecessary page-alignement operations in ioremap calls
- * (ioremap is currently safe for these operations).
- *
- * Revision 2.2.1.9 1998/12/30 18:18:30 ivan
- * Changed access to PLX PCI bridge registers from I/O to MMIO, in
- * order to make PLX9050-based boards work with certain motherboards.
- *
- * Revision 2.2.1.8 1998/11/13 12:46:20 ivan
- * cy_close function now resets (correctly) the tty->closing flag;
- * JIFFIES_DIFF macro fixed.
- *
- * Revision 2.2.1.7 1998/09/03 12:07:28 ivan
- * Fixed bug in cy_close function, which was not informing HW of
- * which port should have the reception disabled before doing so;
- * fixed Cyclom-8YoP hardware detection bug.
- *
- * Revision 2.2.1.6 1998/08/20 17:15:39 ivan
- * Fixed bug in cy_close function, which causes malfunction
- * of one of the first 4 ports when a higher port is closed
- * (Cyclom-Y only).
- *
- * Revision 2.2.1.5 1998/08/10 18:10:28 ivan
- * Fixed Cyclom-4Yo hardware detection bug.
- *
- * Revision 2.2.1.4 1998/08/04 11:02:50 ivan
- * /proc/cyclades implementation with great collaboration of
- * Marc Lewis <marc@blarg.net>;
- * cyy_interrupt was changed to avoid occurrence of kernel oopses
- * during PPP operation.
- *
- * Revision 2.2.1.3 1998/06/01 12:09:10 ivan
- * General code review in order to comply with 2.1 kernel standards;
- * data loss prevention for slow devices revisited (cy_wait_until_sent
- * was created);
- * removed conditional compilation for new/old PCI structure support
- * (now the driver only supports the new PCI structure).
- *
- * Revision 2.2.1.1 1998/03/19 16:43:12 ivan
- * added conditional compilation for new/old PCI structure support;
- * removed kernel series (2.0.x / 2.1.x) conditional compilation.
- *
- * Revision 2.1.1.3 1998/03/16 18:01:12 ivan
- * cleaned up the data loss fix;
- * fixed XON/XOFF handling once more (Cyclades-Z);
- * general review of the driver routines;
- * introduction of a mechanism to prevent data loss with slow
- * printers, by forcing a delay before closing the port.
- *
- * Revision 2.1.1.2 1998/02/17 16:50:00 ivan
- * fixed detection/handling of new CD1400 in Ye boards;
- * fixed XON/XOFF handling (Cyclades-Z);
- * fixed data loss caused by a premature port close;
- * introduction of a flag that holds the CD1400 version ID per port
- * (used by the CYGETCD1400VER new ioctl).
- *
- * Revision 2.1.1.1 1997/12/03 17:31:19 ivan
- * Code review for the module cleanup routine;
- * fixed RTS and DTR status report for new CD1400's in get_modem_info;
- * includes anonymous changes regarding signal_pending.
- *
- * Revision 2.1 1997/11/01 17:42:41 ivan
- * Changes in the driver to support Alpha systems (except 8Zo V_1);
- * BREAK fix for the Cyclades-Z boards;
- * driver inactivity control by FW implemented;
- * introduction of flag that allows driver to take advantage of
- * a special CD1400 feature related to HW flow control;
- * added support for the CD1400 rev. J (Cyclom-Y boards);
- * introduction of ioctls to:
- * - control the rtsdtr_inv flag (Cyclom-Y);
- * - control the rflow flag (Cyclom-Y);
- * - adjust the polling interval (Cyclades-Z);
- *
- * Revision 1.36.4.33 1997/06/27 19:00:00 ivan
- * Fixes related to kernel version conditional
- * compilation.
- *
- * Revision 1.36.4.32 1997/06/14 19:30:00 ivan
- * Compatibility issues between kernels 2.0.x and
- * 2.1.x (mainly related to clear_bit function).
- *
- * Revision 1.36.4.31 1997/06/03 15:30:00 ivan
- * Changes to define the memory window according to the
- * board type.
- *
- * Revision 1.36.4.30 1997/05/16 15:30:00 daniel
- * Changes to support new cycladesZ boards.
- *
- * Revision 1.36.4.29 1997/05/12 11:30:00 daniel
- * Merge of Bentson's and Daniel's version 1.36.4.28.
- * Corrects bug in cy_detect_pci: check if there are more
- * ports than the number of static structs allocated.
- * Warning message during initialization if this driver is
- * used with the new generation of cycladesZ boards. Those
- * will be supported only in next release of the driver.
- * Corrects bug in cy_detect_pci and cy_detect_isa that
- * returned wrong number of VALID boards, when a cyclomY
- * was found with no serial modules connected.
- * Changes to use current (2.1.x) kernel subroutine names
- * and created macros for compilation with 2.0.x kernel,
- * instead of the other way around.
- *
- * Revision 1.36.4.28 1997/05/?? ??:00:00 bentson
- * Change queue_task_irq_off to queue_task_irq.
- * The inline function queue_task_irq_off (tqueue.h)
- * was removed from latest releases of 2.1.x kernel.
- * Use of macro __init to mark the initialization
- * routines, so memory can be reused.
- * Also incorporate implementation of critical region
- * in function cleanup_module() created by anonymous
- * linuxer.
- *
- * Revision 1.36.4.28 1997/04/25 16:00:00 daniel
- * Change to support new firmware that solves DCD problem:
- * application could fail to receive SIGHUP signal when DCD
- * varying too fast.
- *
- * Revision 1.36.4.27 1997/03/26 10:30:00 daniel
- * Changed for support linux versions 2.1.X.
- * Backward compatible with linux versions 2.0.X.
- * Corrected illegal use of filler field in
- * CH_CTRL struct.
- * Deleted some debug messages.
- *
- * Revision 1.36.4.26 1997/02/27 12:00:00 daniel
- * Included check for NULL tty pointer in cyz_poll.
- *
- * Revision 1.36.4.25 1997/02/26 16:28:30 bentson
- * Bill Foster at Blarg! Online services noticed that
- * some of the switch elements of -Z modem control
- * lacked a closing "break;"
- *
- * Revision 1.36.4.24 1997/02/24 11:00:00 daniel
- * Changed low water threshold for buffer xmit_buf
- *
- * Revision 1.36.4.23 1996/12/02 21:50:16 bentson
- * Marcio provided fix to modem status fetch for -Z
- *
- * Revision 1.36.4.22 1996/10/28 22:41:17 bentson
- * improve mapping of -Z control page (thanks to Steve
- * Price <stevep@fa.tdktca.com> for help on this)
- *
- * Revision 1.36.4.21 1996/09/10 17:00:10 bentson
- * shift from CPU-bound to memcopy in cyz_polling operation
- *
- * Revision 1.36.4.20 1996/09/09 18:30:32 Bentson
- * Added support to set and report higher speeds.
- *
- * Revision 1.36.4.19c 1996/08/09 10:00:00 Marcio Saito
- * Some fixes in the HW flow control for the BETA release.
- * Don't try to register the IRQ.
- *
- * Revision 1.36.4.19 1996/08/08 16:23:18 Bentson
- * make sure "cyc" appears in all kernel messages; all soft interrupts
- * handled by same routine; recognize out-of-band reception; comment
- * out some diagnostic messages; leave RTS/CTS flow control to hardware;
- * fix race condition in -Z buffer management; only -Y needs to explicitly
- * flush chars; tidy up some startup messages;
- *
- * Revision 1.36.4.18 1996/07/25 18:57:31 bentson
- * shift MOD_INC_USE_COUNT location to match
- * serial.c; purge some diagnostic messages;
- *
- * Revision 1.36.4.17 1996/07/25 18:01:08 bentson
- * enable modem status messages and fetch & process them; note
- * time of last activity type for each port; set_line_char now
- * supports more than line 0 and treats 0 baud correctly;
- * get_modem_info senses rs_status;
- *
- * Revision 1.36.4.16 1996/07/20 08:43:15 bentson
- * barely works--now's time to turn on
- * more features 'til it breaks
- *
- * Revision 1.36.4.15 1996/07/19 22:30:06 bentson
- * check more -Z board status; shorten boot message
- *
- * Revision 1.36.4.14 1996/07/19 22:20:37 bentson
- * fix reference to ch_ctrl in startup; verify return
- * values from cyz_issue_cmd and cyz_update_channel;
- * more stuff to get modem control correct;
- *
- * Revision 1.36.4.13 1996/07/11 19:53:33 bentson
- * more -Z stuff folded in; re-order changes to put -Z stuff
- * after -Y stuff (to make changes clearer)
- *
- * Revision 1.36.4.12 1996/07/11 15:40:55 bentson
- * Add code to poll Cyclades-Z. Add code to get & set RS-232 control.
- * Add code to send break. Clear firmware ID word at startup (so
- * that other code won't talk to inactive board).
- *
- * Revision 1.36.4.11 1996/07/09 05:28:29 bentson
- * add code for -Z in set_line_char
- *
- * Revision 1.36.4.10 1996/07/08 19:28:37 bentson
- * fold more -Z stuff (or in some cases, error messages)
- * into driver; add text to "don't know what to do" messages.
- *
- * Revision 1.36.4.9 1996/07/08 18:38:38 bentson
- * moved compile-time flags near top of file; cosmetic changes
- * to narrow text (to allow 2-up printing); changed many declarations
- * to "static" to limit external symbols; shuffled code order to
- * coalesce -Y and -Z specific code, also to put internal functions
- * in order of tty_driver structure; added code to recognize -Z
- * ports (and for moment, do nothing or report error); add cy_startup
- * to parse boot command line for extra base addresses for ISA probes;
- *
- * Revision 1.36.4.8 1996/06/25 17:40:19 bentson
- * reorder some code, fix types of some vars (int vs. long),
- * add cy_setup to support user declared ISA addresses
- *
- * Revision 1.36.4.7 1996/06/21 23:06:18 bentson
- * dump ioctl based firmware load (it's now a user level
- * program); ensure uninitialzed ports cannot be used
- *
- * Revision 1.36.4.6 1996/06/20 23:17:19 bentson
- * rename vars and restructure some code
- *
- * Revision 1.36.4.5 1996/06/14 15:09:44 bentson
- * get right status back after boot load
- *
- * Revision 1.36.4.4 1996/06/13 19:51:44 bentson
- * successfully loads firmware
- *
- * Revision 1.36.4.3 1996/06/13 06:08:33 bentson
- * add more of the code for the boot/load ioctls
- *
- * Revision 1.36.4.2 1996/06/11 21:00:51 bentson
- * start to add Z functionality--starting with ioctl
- * for loading firmware
- *
- * Revision 1.36.4.1 1996/06/10 18:03:02 bentson
- * added code to recognize Z/PCI card at initialization; report
- * presence, but card is not initialized (because firmware needs
- * to be loaded)
- *
- * Revision 1.36.3.8 1996/06/07 16:29:00 bentson
- * starting minor number at zero; added missing verify_area
- * as noted by Heiko Eißfeldt <heiko@colossus.escape.de>
- *
- * Revision 1.36.3.7 1996/04/19 21:06:18 bentson
- * remove unneeded boot message & fix CLOCAL hardware flow
- * control (Miquel van Smoorenburg <miquels@Q.cistron.nl>);
- * remove unused diagnostic statements; minor 0 is first;
- *
- * Revision 1.36.3.6 1996/03/13 13:21:17 marcio
- * The kernel function vremap (available only in later 1.3.xx kernels)
- * allows the access to memory addresses above the RAM. This revision
- * of the driver supports PCI boards below 1Mb (device id 0x100) and
- * above 1Mb (device id 0x101).
- *
- * Revision 1.36.3.5 1996/03/07 15:20:17 bentson
- * Some global changes to interrupt handling spilled into
- * this driver--mostly unused arguments in system function
- * calls. Also added change by Marcio Saito which should
- * reduce lost interrupts at startup by fast processors.
- *
- * Revision 1.36.3.4 1995/11/13 20:45:10 bentson
- * Changes by Corey Minyard <minyard@wf-rch.cirr.com> distributed
- * in 1.3.41 kernel to remove a possible race condition, extend
- * some error messages, and let the driver run as a loadable module
- * Change by Alan Wendt <alan@ez0.ezlink.com> to remove a
- * possible race condition.
- * Change by Marcio Saito <marcio@cyclades.com> to fix PCI addressing.
- *
- * Revision 1.36.3.3 1995/11/13 19:44:48 bentson
- * Changes by Linus Torvalds in 1.3.33 kernel distribution
- * required due to reordering of driver initialization.
- * Drivers are now initialized *after* memory management.
- *
- * Revision 1.36.3.2 1995/09/08 22:07:14 bentson
- * remove printk from ISR; fix typo
- *
- * Revision 1.36.3.1 1995/09/01 12:00:42 marcio
- * Minor fixes in the PCI board support. PCI function calls in
- * conditional compilation (CONFIG_PCI). Thanks to Jim Duncan
- * <duncan@okay.com>. "bad serial count" message removed.
- *
- * Revision 1.36.3 1995/08/22 09:19:42 marcio
- * Cyclom-Y/PCI support added. Changes in the cy_init routine and
- * board initialization. Changes in the boot messages. The driver
- * supports up to 4 boards and 64 ports by default.
- *
- * Revision 1.36.1.4 1995/03/29 06:14:14 bentson
- * disambiguate between Cyclom-16Y and Cyclom-32Ye;
- *
- * Revision 1.36.1.3 1995/03/23 22:15:35 bentson
- * add missing break in modem control block in ioctl switch statement
- * (discovered by Michael Edward Chastain <mec@jobe.shell.portal.com>);
- *
- * Revision 1.36.1.2 1995/03/22 19:16:22 bentson
- * make sure CTS flow control is set as soon as possible (thanks
- * to note from David Lambert <lambert@chesapeake.rps.slb.com>);
- *
- * Revision 1.36.1.1 1995/03/13 15:44:43 bentson
- * initialize defaults for receive threshold and stale data timeout;
- * cosmetic changes;
- *
- * Revision 1.36 1995/03/10 23:33:53 bentson
- * added support of chips 4-7 in 32 port Cyclom-Ye;
- * fix cy_interrupt pointer dereference problem
- * (Joe Portman <baron@aa.net>);
- * give better error response if open is attempted on non-existent port
- * (Zachariah Vaum <jchryslr@netcom.com>);
- * correct command timeout (Kenneth Lerman <lerman@@seltd.newnet.com>);
- * conditional compilation for -16Y on systems with fast, noisy bus;
- * comment out diagnostic print function;
- * cleaned up table of base addresses;
- * set receiver time-out period register to correct value,
- * set receive threshold to better default values,
- * set chip timer to more accurate 200 Hz ticking,
- * add code to monitor and modify receive parameters
- * (Rik Faith <faith@cs.unc.edu> Nick Simicich
- * <njs@scifi.emi.net>);
- *
- * Revision 1.35 1994/12/16 13:54:18 steffen
- * additional patch by Marcio Saito for board detection
- * Accidently left out in 1.34
- *
- * Revision 1.34 1994/12/10 12:37:12 steffen
- * This is the corrected version as suggested by Marcio Saito
- *
- * Revision 1.33 1994/12/01 22:41:18 bentson
- * add hooks to support more high speeds directly; add tytso
- * patch regarding CLOCAL wakeups
- *
- * Revision 1.32 1994/11/23 19:50:04 bentson
- * allow direct kernel control of higher signalling rates;
- * look for cards at additional locations
- *
- * Revision 1.31 1994/11/16 04:33:28 bentson
- * ANOTHER fix from Corey Minyard, minyard@wf-rch.cirr.com--
- * a problem in chars_in_buffer has been resolved by some
- * small changes; this should yield smoother output
- *
- * Revision 1.30 1994/11/16 04:28:05 bentson
- * Fix from Corey Minyard, Internet: minyard@metronet.com,
- * UUCP: minyard@wf-rch.cirr.com, WORK: minyardbnr.ca, to
- * cy_hangup that appears to clear up much (all?) of the
- * DTR glitches; also he's added/cleaned-up diagnostic messages
- *
- * Revision 1.29 1994/11/16 04:16:07 bentson
- * add change proposed by Ralph Sims, ralphs@halcyon.com, to
- * operate higher speeds in same way as other serial ports;
- * add more serial ports (for up to two 16-port muxes).
- *
- * Revision 1.28 1994/11/04 00:13:16 root
- * turn off diagnostic messages
- *
- * Revision 1.27 1994/11/03 23:46:37 root
- * bunch of changes to bring driver into greater conformance
- * with the serial.c driver (looking for missed fixes)
- *
- * Revision 1.26 1994/11/03 22:40:36 root
- * automatic interrupt probing fixed.
- *
- * Revision 1.25 1994/11/03 20:17:02 root
- * start to implement auto-irq
- *
- * Revision 1.24 1994/11/03 18:01:55 root
- * still working on modem signals--trying not to drop DTR
- * during the getty/login processes
- *
- * Revision 1.23 1994/11/03 17:51:36 root
- * extend baud rate support; set receive threshold as function
- * of baud rate; fix some problems with RTS/CTS;
- *
- * Revision 1.22 1994/11/02 18:05:35 root
- * changed arguments to udelay to type long to get
- * delays to be of correct duration
- *
- * Revision 1.21 1994/11/02 17:37:30 root
- * employ udelay (after calibrating loops_per_second earlier
- * in init/main.c) instead of using home-grown delay routines
- *
- * Revision 1.20 1994/11/02 03:11:38 root
- * cy_chars_in_buffer forces a return value of 0 to let
- * login work (don't know why it does); some functions
- * that were returning EFAULT, now executes the code;
- * more work on deciding when to disable xmit interrupts;
- *
- * Revision 1.19 1994/11/01 20:10:14 root
- * define routine to start transmission interrupts (by enabling
- * transmit interrupts); directly enable/disable modem interrupts;
- *
- * Revision 1.18 1994/11/01 18:40:45 bentson
- * Don't always enable transmit interrupts in startup; interrupt on
- * TxMpty instead of TxRdy to help characters get out before shutdown;
- * restructure xmit interrupt to check for chars first and quit if
- * none are ready to go; modem status (MXVRx) is upright, _not_ inverted
- * (to my view);
- *
- * Revision 1.17 1994/10/30 04:39:45 bentson
- * rename serial_driver and callout_driver to cy_serial_driver and
- * cy_callout_driver to avoid linkage interference; initialize
- * info->type to PORT_CIRRUS; ruggedize paranoia test; elide ->port
- * from cyclades_port structure; add paranoia check to cy_close;
- *
- * Revision 1.16 1994/10/30 01:14:33 bentson
- * change major numbers; add some _early_ return statements;
- *
- * Revision 1.15 1994/10/29 06:43:15 bentson
- * final tidying up for clean compile; enable some error reporting
- *
- * Revision 1.14 1994/10/28 20:30:22 Bentson
- * lots of changes to drag the driver towards the new tty_io
- * structures and operation. not expected to work, but may
- * compile cleanly.
- *
- * Revision 1.13 1994/07/21 23:08:57 Bentson
- * add some diagnostic cruft; support 24 lines (for testing
- * both -8Y and -16Y cards; be more thorough in servicing all
- * chips during interrupt; add "volatile" a few places to
- * circumvent compiler optimizations; fix base & offset
- * computations in block_til_ready (was causing chip 0 to
- * stop operation)
- *
- * Revision 1.12 1994/07/19 16:42:11 Bentson
- * add some hackery for kernel version 1.1.8; expand
- * error messages; refine timing for delay loops and
- * declare loop params volatile
- *
- * Revision 1.11 1994/06/11 21:53:10 bentson
- * get use of save_car right in transmit interrupt service
- *
- * Revision 1.10.1.1 1994/06/11 21:31:18 bentson
- * add some diagnostic printing; try to fix save_car stuff
- *
- * Revision 1.10 1994/06/11 20:36:08 bentson
- * clean up compiler warnings
- *
- * Revision 1.9 1994/06/11 19:42:46 bentson
- * added a bunch of code to support modem signalling
- *
- * Revision 1.8 1994/06/11 17:57:07 bentson
- * recognize break & parity error
- *
- * Revision 1.7 1994/06/05 05:51:34 bentson
- * Reorder baud table to be monotonic; add cli to CP; discard
- * incoming characters and status if the line isn't open; start to
- * fold code into cy_throttle; start to port get_serial_info,
- * set_serial_info, get_modem_info, set_modem_info, and send_break
- * from serial.c; expand cy_ioctl; relocate and expand config_setup;
- * get flow control characters from tty struct; invalidate ports w/o
- * hardware;
- *
- * Revision 1.6 1994/05/31 18:42:21 bentson
- * add a loop-breaker in the interrupt service routine;
- * note when port is initialized so that it can be shut
- * down under the right conditions; receive works without
- * any obvious errors
- *
- * Revision 1.5 1994/05/30 00:55:02 bentson
- * transmit works without obvious errors
- *
- * Revision 1.4 1994/05/27 18:46:27 bentson
- * incorporated more code from lib_y.c; can now print short
- * strings under interrupt control to port zero; seems to
- * select ports/channels/lines correctly
- *
- * Revision 1.3 1994/05/25 22:12:44 bentson
- * shifting from multi-port on a card to proper multiplexor
- * data structures; added skeletons of most routines
- *
- * Revision 1.2 1994/05/19 13:21:43 bentson
- * start to crib from other sources
- *
*/
-#define CY_VERSION "2.5"
+#define CY_VERSION "2.6"
/* If you need to install more boards than NR_CARDS, change the constant
in the definition below. No other change is necessary to support up to
@@ -648,9 +80,7 @@
#include <linux/firmware.h>
#include <linux/device.h>
-#include <asm/system.h>
#include <linux/io.h>
-#include <asm/irq.h>
#include <linux/uaccess.h>
#include <linux/kernel.h>
@@ -660,13 +90,11 @@
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
-static void cy_throttle(struct tty_struct *tty);
static void cy_send_xchar(struct tty_struct *tty, char ch);
#ifndef SERIAL_XMIT_SIZE
#define SERIAL_XMIT_SIZE (min(PAGE_SIZE, 4096))
#endif
-#define WAKEUP_CHARS 256
#define STD_COM_FLAGS (0)
@@ -756,25 +184,25 @@ static int cy_next_channel; /* next minor available */
* HI VHI
* 20
*/
-static int baud_table[] = {
+static const int baud_table[] = {
0, 50, 75, 110, 134, 150, 200, 300, 600, 1200,
1800, 2400, 4800, 9600, 19200, 38400, 57600, 76800, 115200, 150000,
230400, 0
};
-static char baud_co_25[] = { /* 25 MHz clock option table */
+static const char baud_co_25[] = { /* 25 MHz clock option table */
/* value => 00 01 02 03 04 */
/* divide by 8 32 128 512 2048 */
0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, 0x03, 0x02,
0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
-static char baud_bpr_25[] = { /* 25 MHz baud rate period table */
+static const char baud_bpr_25[] = { /* 25 MHz baud rate period table */
0x00, 0xf5, 0xa3, 0x6f, 0x5c, 0x51, 0xf5, 0xa3, 0x51, 0xa3,
0x6d, 0x51, 0xa3, 0x51, 0xa3, 0x51, 0x36, 0x29, 0x1b, 0x15
};
-static char baud_co_60[] = { /* 60 MHz clock option table (CD1400 J) */
+static const char baud_co_60[] = { /* 60 MHz clock option table (CD1400 J) */
/* value => 00 01 02 03 04 */
/* divide by 8 32 128 512 2048 */
0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03,
@@ -782,13 +210,13 @@ static char baud_co_60[] = { /* 60 MHz clock option table (CD1400 J) */
0x00
};
-static char baud_bpr_60[] = { /* 60 MHz baud rate period table (CD1400 J) */
+static const char baud_bpr_60[] = { /* 60 MHz baud rate period table (CD1400 J) */
0x00, 0x82, 0x21, 0xff, 0xdb, 0xc3, 0x92, 0x62, 0xc3, 0x62,
0x41, 0xc3, 0x62, 0xc3, 0x62, 0xc3, 0x82, 0x62, 0x41, 0x32,
0x21
};
-static char baud_cor3[] = { /* receive threshold */
+static const char baud_cor3[] = { /* receive threshold */
0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a,
0x0a, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x08, 0x08, 0x07,
0x07
@@ -805,7 +233,7 @@ static char baud_cor3[] = { /* receive threshold */
* cables.
*/
-static char rflow_thr[] = { /* rflow threshold */
+static const char rflow_thr[] = { /* rflow threshold */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a,
0x0a
@@ -814,7 +242,7 @@ static char rflow_thr[] = { /* rflow threshold */
/* The Cyclom-Ye has placed the sequential chips in non-sequential
* address order. This look-up table overcomes that problem.
*/
-static int cy_chip_offset[] = { 0x0000,
+static const unsigned int cy_chip_offset[] = { 0x0000,
0x0400,
0x0800,
0x0C00,
@@ -827,7 +255,7 @@ static int cy_chip_offset[] = { 0x0000,
/* PCI related definitions */
#ifdef CONFIG_PCI
-static struct pci_device_id cy_pci_dev_id[] __devinitdata = {
+static const struct pci_device_id cy_pci_dev_id[] = {
/* PCI < 1Mb */
{ PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Y_Lo) },
/* PCI > 1Mb */
@@ -850,7 +278,7 @@ MODULE_DEVICE_TABLE(pci, cy_pci_dev_id);
#endif
static void cy_start(struct tty_struct *);
-static void set_line_char(struct cyclades_port *);
+static void cy_set_line_char(struct cyclades_port *, struct tty_struct *);
static int cyz_issue_cmd(struct cyclades_card *, __u32, __u8, __u32);
#ifdef CONFIG_ISA
static unsigned detect_isa_irq(void __iomem *);
@@ -869,6 +297,20 @@ static void cyz_rx_restart(unsigned long);
static struct timer_list cyz_rx_full_timer[NR_PORTS];
#endif /* CONFIG_CYZ_INTR */
+static inline void cyy_writeb(struct cyclades_port *port, u32 reg, u8 val)
+{
+ struct cyclades_card *card = port->card;
+
+ cy_writeb(port->u.cyy.base_addr + (reg << card->bus_index), val);
+}
+
+static inline u8 cyy_readb(struct cyclades_port *port, u32 reg)
+{
+ struct cyclades_card *card = port->card;
+
+ return readb(port->u.cyy.base_addr + (reg << card->bus_index));
+}
+
static inline bool cy_is_Z(struct cyclades_card *card)
{
return card->num_chips == (unsigned int)-1;
@@ -893,7 +335,7 @@ static inline bool cyz_is_loaded(struct cyclades_card *card)
}
static inline int serial_paranoia_check(struct cyclades_port *info,
- char *name, const char *routine)
+ const char *name, const char *routine)
{
#ifdef SERIAL_PARANOIA_CHECK
if (!info) {
@@ -909,7 +351,7 @@ static inline int serial_paranoia_check(struct cyclades_port *info,
}
#endif
return 0;
-} /* serial_paranoia_check */
+}
/***********************************************************/
/********* Start of block of Cyclom-Y specific code ********/
@@ -921,13 +363,14 @@ static inline int serial_paranoia_check(struct cyclades_port *info,
This function is only called from inside spinlock-protected code.
*/
-static int cyy_issue_cmd(void __iomem *base_addr, u_char cmd, int index)
+static int __cyy_issue_cmd(void __iomem *base_addr, u8 cmd, int index)
{
+ void __iomem *ccr = base_addr + (CyCCR << index);
unsigned int i;
/* Check to see that the previous command has completed */
for (i = 0; i < 100; i++) {
- if (readb(base_addr + (CyCCR << index)) == 0)
+ if (readb(ccr) == 0)
break;
udelay(10L);
}
@@ -937,10 +380,16 @@ static int cyy_issue_cmd(void __iomem *base_addr, u_char cmd, int index)
return -1;
/* Issue the new command */
- cy_writeb(base_addr + (CyCCR << index), cmd);
+ cy_writeb(ccr, cmd);
return 0;
-} /* cyy_issue_cmd */
+}
+
+static inline int cyy_issue_cmd(struct cyclades_port *port, u8 cmd)
+{
+ return __cyy_issue_cmd(port->u.cyy.base_addr, cmd,
+ port->card->bus_index);
+}
#ifdef CONFIG_ISA
/* ISA interrupt detection code */
@@ -960,12 +409,12 @@ static unsigned detect_isa_irq(void __iomem *address)
irqs = probe_irq_on();
/* Wait ... */
- udelay(5000L);
+ msleep(5);
/* Enable the Tx interrupts on the CD1400 */
local_irq_save(flags);
cy_writeb(address + (CyCAR << index), 0);
- cyy_issue_cmd(address, CyCHAN_CTL | CyENB_XMTR, index);
+ __cyy_issue_cmd(address, CyCHAN_CTL | CyENB_XMTR, index);
cy_writeb(address + (CyCAR << index), 0);
cy_writeb(address + (CySRER << index),
@@ -973,7 +422,7 @@ static unsigned detect_isa_irq(void __iomem *address)
local_irq_restore(flags);
/* Wait ... */
- udelay(5000L);
+ msleep(5);
/* Check which interrupt is in use */
irq = probe_irq_off(irqs);
@@ -999,7 +448,7 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
struct cyclades_port *info;
struct tty_struct *tty;
int len, index = cinfo->bus_index;
- u8 save_xir, channel, save_car, data, char_count;
+ u8 ivr, save_xir, channel, save_car, data, char_count;
#ifdef CY_DEBUG_INTERRUPTS
printk(KERN_DEBUG "cyy_interrupt: rcvd intr, chip %d\n", chip);
@@ -1008,26 +457,25 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
save_xir = readb(base_addr + (CyRIR << index));
channel = save_xir & CyIRChannel;
info = &cinfo->ports[channel + chip * 4];
- save_car = readb(base_addr + (CyCAR << index));
- cy_writeb(base_addr + (CyCAR << index), save_xir);
+ save_car = cyy_readb(info, CyCAR);
+ cyy_writeb(info, CyCAR, save_xir);
+ ivr = cyy_readb(info, CyRIVR) & CyIVRMask;
+ tty = tty_port_tty_get(&info->port);
/* if there is nowhere to put the data, discard it */
- if (info->port.tty == NULL) {
- if ((readb(base_addr + (CyRIVR << index)) & CyIVRMask) ==
- CyIVRRxEx) { /* exception */
- data = readb(base_addr + (CyRDSR << index));
+ if (tty == NULL) {
+ if (ivr == CyIVRRxEx) { /* exception */
+ data = cyy_readb(info, CyRDSR);
} else { /* normal character reception */
- char_count = readb(base_addr + (CyRDCR << index));
+ char_count = cyy_readb(info, CyRDCR);
while (char_count--)
- data = readb(base_addr + (CyRDSR << index));
+ data = cyy_readb(info, CyRDSR);
}
goto end;
}
/* there is an open port for this data */
- tty = info->port.tty;
- if ((readb(base_addr + (CyRIVR << index)) & CyIVRMask) ==
- CyIVRRxEx) { /* exception */
- data = readb(base_addr + (CyRDSR << index));
+ if (ivr == CyIVRRxEx) { /* exception */
+ data = cyy_readb(info, CyRDSR);
/* For statistics only */
if (data & CyBREAK)
@@ -1041,28 +489,29 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
if (data & info->ignore_status_mask) {
info->icount.rx++;
+ tty_kref_put(tty);
return;
}
if (tty_buffer_request_room(tty, 1)) {
if (data & info->read_status_mask) {
if (data & CyBREAK) {
tty_insert_flip_char(tty,
- readb(base_addr + (CyRDSR <<
- index)), TTY_BREAK);
+ cyy_readb(info, CyRDSR),
+ TTY_BREAK);
info->icount.rx++;
if (info->port.flags & ASYNC_SAK)
do_SAK(tty);
} else if (data & CyFRAME) {
tty_insert_flip_char(tty,
- readb(base_addr + (CyRDSR <<
- index)), TTY_FRAME);
+ cyy_readb(info, CyRDSR),
+ TTY_FRAME);
info->icount.rx++;
info->idle_stats.frame_errs++;
} else if (data & CyPARITY) {
/* Pieces of seven... */
tty_insert_flip_char(tty,
- readb(base_addr + (CyRDSR <<
- index)), TTY_PARITY);
+ cyy_readb(info, CyRDSR),
+ TTY_PARITY);
info->icount.rx++;
info->idle_stats.parity_errs++;
} else if (data & CyOVERRUN) {
@@ -1074,8 +523,8 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
the next incoming character.
*/
tty_insert_flip_char(tty,
- readb(base_addr + (CyRDSR <<
- index)), TTY_FRAME);
+ cyy_readb(info, CyRDSR),
+ TTY_FRAME);
info->icount.rx++;
info->idle_stats.overruns++;
/* These two conditions may imply */
@@ -1099,7 +548,7 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
}
} else { /* normal character reception */
/* load # chars available from the chip */
- char_count = readb(base_addr + (CyRDCR << index));
+ char_count = cyy_readb(info, CyRDCR);
#ifdef CY_ENABLE_MONITORING
++info->mon.int_count;
@@ -1110,7 +559,7 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
#endif
len = tty_buffer_request_room(tty, char_count);
while (len--) {
- data = readb(base_addr + (CyRDSR << index));
+ data = cyy_readb(info, CyRDSR);
tty_insert_flip_char(tty, data, TTY_NORMAL);
info->idle_stats.recv_bytes++;
info->icount.rx++;
@@ -1121,16 +570,18 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
info->idle_stats.recv_idle = jiffies;
}
tty_schedule_flip(tty);
+ tty_kref_put(tty);
end:
/* end of service */
- cy_writeb(base_addr + (CyRIR << index), save_xir & 0x3f);
- cy_writeb(base_addr + (CyCAR << index), save_car);
+ cyy_writeb(info, CyRIR, save_xir & 0x3f);
+ cyy_writeb(info, CyCAR, save_car);
}
static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
void __iomem *base_addr)
{
struct cyclades_port *info;
+ struct tty_struct *tty;
int char_count, index = cinfo->bus_index;
u8 save_xir, channel, save_car, outch;
@@ -1154,9 +605,9 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
goto end;
}
info = &cinfo->ports[channel + chip * 4];
- if (info->port.tty == NULL) {
- cy_writeb(base_addr + (CySRER << index),
- readb(base_addr + (CySRER << index)) & ~CyTxRdy);
+ tty = tty_port_tty_get(&info->port);
+ if (tty == NULL) {
+ cyy_writeb(info, CySRER, cyy_readb(info, CySRER) & ~CyTxRdy);
goto end;
}
@@ -1165,7 +616,7 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
if (info->x_char) { /* send special char */
outch = info->x_char;
- cy_writeb(base_addr + (CyTDR << index), outch);
+ cyy_writeb(info, CyTDR, outch);
char_count--;
info->icount.tx++;
info->x_char = 0;
@@ -1173,14 +624,14 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
if (info->breakon || info->breakoff) {
if (info->breakon) {
- cy_writeb(base_addr + (CyTDR << index), 0);
- cy_writeb(base_addr + (CyTDR << index), 0x81);
+ cyy_writeb(info, CyTDR, 0);
+ cyy_writeb(info, CyTDR, 0x81);
info->breakon = 0;
char_count -= 2;
}
if (info->breakoff) {
- cy_writeb(base_addr + (CyTDR << index), 0);
- cy_writeb(base_addr + (CyTDR << index), 0x83);
+ cyy_writeb(info, CyTDR, 0);
+ cyy_writeb(info, CyTDR, 0x83);
info->breakoff = 0;
char_count -= 2;
}
@@ -1188,27 +639,23 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
while (char_count-- > 0) {
if (!info->xmit_cnt) {
- if (readb(base_addr + (CySRER << index)) & CyTxMpty) {
- cy_writeb(base_addr + (CySRER << index),
- readb(base_addr + (CySRER << index)) &
- ~CyTxMpty);
+ if (cyy_readb(info, CySRER) & CyTxMpty) {
+ cyy_writeb(info, CySRER,
+ cyy_readb(info, CySRER) & ~CyTxMpty);
} else {
- cy_writeb(base_addr + (CySRER << index),
- (readb(base_addr + (CySRER << index)) &
- ~CyTxRdy) | CyTxMpty);
+ cyy_writeb(info, CySRER, CyTxMpty |
+ (cyy_readb(info, CySRER) & ~CyTxRdy));
}
goto done;
}
if (info->port.xmit_buf == NULL) {
- cy_writeb(base_addr + (CySRER << index),
- readb(base_addr + (CySRER << index)) &
- ~CyTxRdy);
+ cyy_writeb(info, CySRER,
+ cyy_readb(info, CySRER) & ~CyTxRdy);
goto done;
}
- if (info->port.tty->stopped || info->port.tty->hw_stopped) {
- cy_writeb(base_addr + (CySRER << index),
- readb(base_addr + (CySRER << index)) &
- ~CyTxRdy);
+ if (tty->stopped || tty->hw_stopped) {
+ cyy_writeb(info, CySRER,
+ cyy_readb(info, CySRER) & ~CyTxRdy);
goto done;
}
/* Because the Embedded Transmit Commands have been enabled,
@@ -1225,15 +672,15 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
info->xmit_cnt--;
info->xmit_tail = (info->xmit_tail + 1) &
(SERIAL_XMIT_SIZE - 1);
- cy_writeb(base_addr + (CyTDR << index), outch);
+ cyy_writeb(info, CyTDR, outch);
info->icount.tx++;
} else {
if (char_count > 1) {
info->xmit_cnt--;
info->xmit_tail = (info->xmit_tail + 1) &
(SERIAL_XMIT_SIZE - 1);
- cy_writeb(base_addr + (CyTDR << index), outch);
- cy_writeb(base_addr + (CyTDR << index), 0);
+ cyy_writeb(info, CyTDR, outch);
+ cyy_writeb(info, CyTDR, 0);
info->icount.tx++;
char_count--;
}
@@ -1241,17 +688,19 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
}
done:
- tty_wakeup(info->port.tty);
+ tty_wakeup(tty);
+ tty_kref_put(tty);
end:
/* end of service */
- cy_writeb(base_addr + (CyTIR << index), save_xir & 0x3f);
- cy_writeb(base_addr + (CyCAR << index), save_car);
+ cyy_writeb(info, CyTIR, save_xir & 0x3f);
+ cyy_writeb(info, CyCAR, save_car);
}
static void cyy_chip_modem(struct cyclades_card *cinfo, int chip,
void __iomem *base_addr)
{
struct cyclades_port *info;
+ struct tty_struct *tty;
int index = cinfo->bus_index;
u8 save_xir, channel, save_car, mdm_change, mdm_status;
@@ -1259,13 +708,14 @@ static void cyy_chip_modem(struct cyclades_card *cinfo, int chip,
save_xir = readb(base_addr + (CyMIR << index));
channel = save_xir & CyIRChannel;
info = &cinfo->ports[channel + chip * 4];
- save_car = readb(base_addr + (CyCAR << index));
- cy_writeb(base_addr + (CyCAR << index), save_xir);
+ save_car = cyy_readb(info, CyCAR);
+ cyy_writeb(info, CyCAR, save_xir);
- mdm_change = readb(base_addr + (CyMISR << index));
- mdm_status = readb(base_addr + (CyMSVR1 << index));
+ mdm_change = cyy_readb(info, CyMISR);
+ mdm_status = cyy_readb(info, CyMSVR1);
- if (!info->port.tty)
+ tty = tty_port_tty_get(&info->port);
+ if (!tty)
goto end;
if (mdm_change & CyANY_DELTA) {
@@ -1279,35 +729,32 @@ static void cyy_chip_modem(struct cyclades_card *cinfo, int chip,
if (mdm_change & CyRI)
info->icount.rng++;
- wake_up_interruptible(&info->delta_msr_wait);
+ wake_up_interruptible(&info->port.delta_msr_wait);
}
if ((mdm_change & CyDCD) && (info->port.flags & ASYNC_CHECK_CD)) {
- if (!(mdm_status & CyDCD)) {
- tty_hangup(info->port.tty);
- info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
- }
- wake_up_interruptible(&info->port.open_wait);
+ if (mdm_status & CyDCD)
+ wake_up_interruptible(&info->port.open_wait);
+ else
+ tty_hangup(tty);
}
if ((mdm_change & CyCTS) && (info->port.flags & ASYNC_CTS_FLOW)) {
- if (info->port.tty->hw_stopped) {
+ if (tty->hw_stopped) {
if (mdm_status & CyCTS) {
/* cy_start isn't used
because... !!! */
- info->port.tty->hw_stopped = 0;
- cy_writeb(base_addr + (CySRER << index),
- readb(base_addr + (CySRER << index)) |
- CyTxRdy);
- tty_wakeup(info->port.tty);
+ tty->hw_stopped = 0;
+ cyy_writeb(info, CySRER,
+ cyy_readb(info, CySRER) | CyTxRdy);
+ tty_wakeup(tty);
}
} else {
if (!(mdm_status & CyCTS)) {
/* cy_stop isn't used
because ... !!! */
- info->port.tty->hw_stopped = 1;
- cy_writeb(base_addr + (CySRER << index),
- readb(base_addr + (CySRER << index)) &
- ~CyTxRdy);
+ tty->hw_stopped = 1;
+ cyy_writeb(info, CySRER,
+ cyy_readb(info, CySRER) & ~CyTxRdy);
}
}
}
@@ -1315,10 +762,11 @@ static void cyy_chip_modem(struct cyclades_card *cinfo, int chip,
}
if (mdm_change & CyRI) {
}*/
+ tty_kref_put(tty);
end:
/* end of service */
- cy_writeb(base_addr + (CyMIR << index), save_xir & 0x3f);
- cy_writeb(base_addr + (CyCAR << index), save_car);
+ cyy_writeb(info, CyMIR, save_xir & 0x3f);
+ cyy_writeb(info, CyCAR, save_car);
}
/* The real interrupt service routine is called
@@ -1389,6 +837,56 @@ static irqreturn_t cyy_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
} /* cyy_interrupt */
+static void cyy_change_rts_dtr(struct cyclades_port *info, unsigned int set,
+ unsigned int clear)
+{
+ struct cyclades_card *card = info->card;
+ int channel = info->line - card->first_line;
+ u32 rts, dtr, msvrr, msvrd;
+
+ channel &= 0x03;
+
+ if (info->rtsdtr_inv) {
+ msvrr = CyMSVR2;
+ msvrd = CyMSVR1;
+ rts = CyDTR;
+ dtr = CyRTS;
+ } else {
+ msvrr = CyMSVR1;
+ msvrd = CyMSVR2;
+ rts = CyRTS;
+ dtr = CyDTR;
+ }
+ if (set & TIOCM_RTS) {
+ cyy_writeb(info, CyCAR, channel);
+ cyy_writeb(info, msvrr, rts);
+ }
+ if (clear & TIOCM_RTS) {
+ cyy_writeb(info, CyCAR, channel);
+ cyy_writeb(info, msvrr, ~rts);
+ }
+ if (set & TIOCM_DTR) {
+ cyy_writeb(info, CyCAR, channel);
+ cyy_writeb(info, msvrd, dtr);
+#ifdef CY_DEBUG_DTR
+ printk(KERN_DEBUG "cyc:set_modem_info raising DTR\n");
+ printk(KERN_DEBUG " status: 0x%x, 0x%x\n",
+ cyy_readb(info, CyMSVR1),
+ cyy_readb(info, CyMSVR2));
+#endif
+ }
+ if (clear & TIOCM_DTR) {
+ cyy_writeb(info, CyCAR, channel);
+ cyy_writeb(info, msvrd, ~dtr);
+#ifdef CY_DEBUG_DTR
+ printk(KERN_DEBUG "cyc:set_modem_info dropping DTR\n");
+ printk(KERN_DEBUG " status: 0x%x, 0x%x\n",
+ cyy_readb(info, CyMSVR1),
+ cyy_readb(info, CyMSVR2));
+#endif
+ }
+}
+
/***********************************************************/
/********* End of block of Cyclom-Y specific code **********/
/******** Start of block of Cyclades-Z specific code *******/
@@ -1398,15 +896,9 @@ static int
cyz_fetch_msg(struct cyclades_card *cinfo,
__u32 *channel, __u8 *cmd, __u32 *param)
{
- struct FIRM_ID __iomem *firm_id;
- struct ZFW_CTRL __iomem *zfw_ctrl;
- struct BOARD_CTRL __iomem *board_ctrl;
+ struct BOARD_CTRL __iomem *board_ctrl = cinfo->board_ctrl;
unsigned long loc_doorbell;
- firm_id = cinfo->base_addr + ID_ADDRESS;
- zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
- board_ctrl = &zfw_ctrl->board_ctrl;
-
loc_doorbell = readl(&cinfo->ctl_addr.p9060->loc_doorbell);
if (loc_doorbell) {
*cmd = (char)(0xff & loc_doorbell);
@@ -1422,19 +914,13 @@ static int
cyz_issue_cmd(struct cyclades_card *cinfo,
__u32 channel, __u8 cmd, __u32 param)
{
- struct FIRM_ID __iomem *firm_id;
- struct ZFW_CTRL __iomem *zfw_ctrl;
- struct BOARD_CTRL __iomem *board_ctrl;
+ struct BOARD_CTRL __iomem *board_ctrl = cinfo->board_ctrl;
__u32 __iomem *pci_doorbell;
unsigned int index;
- firm_id = cinfo->base_addr + ID_ADDRESS;
if (!cyz_is_loaded(cinfo))
return -1;
- zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
- board_ctrl = &zfw_ctrl->board_ctrl;
-
index = 0;
pci_doorbell = &cinfo->ctl_addr.p9060->pci_doorbell;
while ((readl(pci_doorbell) & 0xff) != 0) {
@@ -1449,11 +935,10 @@ cyz_issue_cmd(struct cyclades_card *cinfo,
return 0;
} /* cyz_issue_cmd */
-static void cyz_handle_rx(struct cyclades_port *info,
- struct BUF_CTRL __iomem *buf_ctrl)
+static void cyz_handle_rx(struct cyclades_port *info, struct tty_struct *tty)
{
+ struct BUF_CTRL __iomem *buf_ctrl = info->u.cyz.buf_ctrl;
struct cyclades_card *cinfo = info->card;
- struct tty_struct *tty = info->port.tty;
unsigned int char_count;
int len;
#ifdef BLOCKMOVE
@@ -1542,11 +1027,10 @@ static void cyz_handle_rx(struct cyclades_port *info,
}
}
-static void cyz_handle_tx(struct cyclades_port *info,
- struct BUF_CTRL __iomem *buf_ctrl)
+static void cyz_handle_tx(struct cyclades_port *info, struct tty_struct *tty)
{
+ struct BUF_CTRL __iomem *buf_ctrl = info->u.cyz.buf_ctrl;
struct cyclades_card *cinfo = info->card;
- struct tty_struct *tty = info->port.tty;
u8 data;
unsigned int char_count;
#ifdef BLOCKMOVE
@@ -1621,34 +1105,24 @@ ztxdone:
static void cyz_handle_cmd(struct cyclades_card *cinfo)
{
+ struct BOARD_CTRL __iomem *board_ctrl = cinfo->board_ctrl;
struct tty_struct *tty;
struct cyclades_port *info;
- static struct FIRM_ID __iomem *firm_id;
- static struct ZFW_CTRL __iomem *zfw_ctrl;
- static struct BOARD_CTRL __iomem *board_ctrl;
- static struct CH_CTRL __iomem *ch_ctrl;
- static struct BUF_CTRL __iomem *buf_ctrl;
__u32 channel, param, fw_ver;
__u8 cmd;
int special_count;
int delta_count;
- firm_id = cinfo->base_addr + ID_ADDRESS;
- zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
- board_ctrl = &zfw_ctrl->board_ctrl;
fw_ver = readl(&board_ctrl->fw_version);
while (cyz_fetch_msg(cinfo, &channel, &cmd, &param) == 1) {
special_count = 0;
delta_count = 0;
info = &cinfo->ports[channel];
- tty = info->port.tty;
+ tty = tty_port_tty_get(&info->port);
if (tty == NULL)
continue;
- ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]);
- buf_ctrl = &(zfw_ctrl->buf_ctrl[channel]);
-
switch (cmd) {
case C_CM_PR_ERROR:
tty_insert_flip_char(tty, 0, TTY_PARITY);
@@ -1669,15 +1143,12 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo)
info->icount.dcd++;
delta_count++;
if (info->port.flags & ASYNC_CHECK_CD) {
- if ((fw_ver > 241 ? ((u_long) param) :
- readl(&ch_ctrl->rs_status)) &
- C_RS_DCD) {
+ u32 dcd = fw_ver > 241 ? param :
+ readl(&info->u.cyz.ch_ctrl->rs_status);
+ if (dcd & C_RS_DCD)
wake_up_interruptible(&info->port.open_wait);
- } else {
- tty_hangup(info->port.tty);
- wake_up_interruptible(&info->port.open_wait);
- info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
- }
+ else
+ tty_hangup(tty);
}
break;
case C_CM_MCTS:
@@ -1706,7 +1177,7 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo)
printk(KERN_DEBUG "cyz_interrupt: rcvd intr, card %d, "
"port %ld\n", info->card, channel);
#endif
- cyz_handle_rx(info, buf_ctrl);
+ cyz_handle_rx(info, tty);
break;
case C_CM_TXBEMPTY:
case C_CM_TXLOWWM:
@@ -1716,7 +1187,7 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo)
printk(KERN_DEBUG "cyz_interrupt: xmit intr, card %d, "
"port %ld\n", info->card, channel);
#endif
- cyz_handle_tx(info, buf_ctrl);
+ cyz_handle_tx(info, tty);
break;
#endif /* CONFIG_CYZ_INTR */
case C_CM_FATAL:
@@ -1726,9 +1197,10 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo)
break;
}
if (delta_count)
- wake_up_interruptible(&info->delta_msr_wait);
+ wake_up_interruptible(&info->port.delta_msr_wait);
if (special_count)
tty_schedule_flip(tty);
+ tty_kref_put(tty);
}
}
@@ -1774,10 +1246,6 @@ static void cyz_poll(unsigned long arg)
{
struct cyclades_card *cinfo;
struct cyclades_port *info;
- struct tty_struct *tty;
- struct FIRM_ID __iomem *firm_id;
- struct ZFW_CTRL __iomem *zfw_ctrl;
- struct BUF_CTRL __iomem *buf_ctrl;
unsigned long expires = jiffies + HZ;
unsigned int port, card;
@@ -1789,10 +1257,6 @@ static void cyz_poll(unsigned long arg)
if (!cyz_is_loaded(cinfo))
continue;
- firm_id = cinfo->base_addr + ID_ADDRESS;
- zfw_ctrl = cinfo->base_addr +
- (readl(&firm_id->zfwctrl_addr) & 0xfffff);
-
/* Skip first polling cycle to avoid racing conditions with the FW */
if (!cinfo->intr_enabled) {
cinfo->intr_enabled = 1;
@@ -1802,13 +1266,17 @@ static void cyz_poll(unsigned long arg)
cyz_handle_cmd(cinfo);
for (port = 0; port < cinfo->nports; port++) {
+ struct tty_struct *tty;
+
info = &cinfo->ports[port];
- tty = info->port.tty;
- buf_ctrl = &(zfw_ctrl->buf_ctrl[port]);
+ tty = tty_port_tty_get(&info->port);
+ /* OK to pass NULL to the handle functions below.
+ They need to drop the data in that case. */
if (!info->throttle)
- cyz_handle_rx(info, buf_ctrl);
- cyz_handle_tx(info, buf_ctrl);
+ cyz_handle_rx(info, tty);
+ cyz_handle_tx(info, tty);
+ tty_kref_put(tty);
}
/* poll every 'cyz_polling_cycle' period */
expires = jiffies + cyz_polling_cycle;
@@ -1824,13 +1292,12 @@ static void cyz_poll(unsigned long arg)
/* This is called whenever a port becomes active;
interrupts are enabled and DTR & RTS are turned on.
*/
-static int startup(struct cyclades_port *info)
+static int cy_startup(struct cyclades_port *info, struct tty_struct *tty)
{
struct cyclades_card *card;
unsigned long flags;
int retval = 0;
- void __iomem *base_addr;
- int chip, channel, index;
+ int channel;
unsigned long page;
card = info->card;
@@ -1842,15 +1309,11 @@ static int startup(struct cyclades_port *info)
spin_lock_irqsave(&card->card_lock, flags);
- if (info->port.flags & ASYNC_INITIALIZED) {
- free_page(page);
+ if (info->port.flags & ASYNC_INITIALIZED)
goto errout;
- }
if (!info->type) {
- if (info->port.tty)
- set_bit(TTY_IO_ERROR, &info->port.tty->flags);
- free_page(page);
+ set_bit(TTY_IO_ERROR, &tty->flags);
goto errout;
}
@@ -1861,96 +1324,53 @@ static int startup(struct cyclades_port *info)
spin_unlock_irqrestore(&card->card_lock, flags);
- set_line_char(info);
+ cy_set_line_char(info, tty);
if (!cy_is_Z(card)) {
- chip = channel >> 2;
channel &= 0x03;
- index = card->bus_index;
- base_addr = card->base_addr + (cy_chip_offset[chip] << index);
-#ifdef CY_DEBUG_OPEN
- printk(KERN_DEBUG "cyc startup card %d, chip %d, channel %d, "
- "base_addr %p\n",
- card, chip, channel, base_addr);
-#endif
spin_lock_irqsave(&card->card_lock, flags);
- cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
+ cyy_writeb(info, CyCAR, channel);
- cy_writeb(base_addr + (CyRTPR << index),
+ cyy_writeb(info, CyRTPR,
(info->default_timeout ? info->default_timeout : 0x02));
/* 10ms rx timeout */
- cyy_issue_cmd(base_addr, CyCHAN_CTL | CyENB_RCVR | CyENB_XMTR,
- index);
-
- cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
- cy_writeb(base_addr + (CyMSVR1 << index), CyRTS);
- cy_writeb(base_addr + (CyMSVR2 << index), CyDTR);
-
-#ifdef CY_DEBUG_DTR
- printk(KERN_DEBUG "cyc:startup raising DTR\n");
- printk(KERN_DEBUG " status: 0x%x, 0x%x\n",
- readb(base_addr + (CyMSVR1 << index)),
- readb(base_addr + (CyMSVR2 << index)));
-#endif
-
- cy_writeb(base_addr + (CySRER << index),
- readb(base_addr + (CySRER << index)) | CyRxData);
- info->port.flags |= ASYNC_INITIALIZED;
-
- if (info->port.tty)
- clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
- info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
- info->breakon = info->breakoff = 0;
- memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats));
- info->idle_stats.in_use =
- info->idle_stats.recv_idle =
- info->idle_stats.xmit_idle = jiffies;
+ cyy_issue_cmd(info, CyCHAN_CTL | CyENB_RCVR | CyENB_XMTR);
- spin_unlock_irqrestore(&card->card_lock, flags);
+ cyy_change_rts_dtr(info, TIOCM_RTS | TIOCM_DTR, 0);
+ cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyRxData);
} else {
- struct FIRM_ID __iomem *firm_id;
- struct ZFW_CTRL __iomem *zfw_ctrl;
- struct BOARD_CTRL __iomem *board_ctrl;
- struct CH_CTRL __iomem *ch_ctrl;
+ struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
- base_addr = card->base_addr;
-
- firm_id = base_addr + ID_ADDRESS;
if (!cyz_is_loaded(card))
return -ENODEV;
- zfw_ctrl = card->base_addr +
- (readl(&firm_id->zfwctrl_addr) & 0xfffff);
- board_ctrl = &zfw_ctrl->board_ctrl;
- ch_ctrl = zfw_ctrl->ch_ctrl;
-
#ifdef CY_DEBUG_OPEN
printk(KERN_DEBUG "cyc startup Z card %d, channel %d, "
- "base_addr %p\n", card, channel, base_addr);
+ "base_addr %p\n", card, channel, card->base_addr);
#endif
spin_lock_irqsave(&card->card_lock, flags);
- cy_writel(&ch_ctrl[channel].op_mode, C_CH_ENABLE);
+ cy_writel(&ch_ctrl->op_mode, C_CH_ENABLE);
#ifdef Z_WAKE
#ifdef CONFIG_CYZ_INTR
- cy_writel(&ch_ctrl[channel].intr_enable,
+ cy_writel(&ch_ctrl->intr_enable,
C_IN_TXBEMPTY | C_IN_TXLOWWM | C_IN_RXHIWM |
C_IN_RXNNDT | C_IN_IOCTLW | C_IN_MDCD);
#else
- cy_writel(&ch_ctrl[channel].intr_enable,
+ cy_writel(&ch_ctrl->intr_enable,
C_IN_IOCTLW | C_IN_MDCD);
#endif /* CONFIG_CYZ_INTR */
#else
#ifdef CONFIG_CYZ_INTR
- cy_writel(&ch_ctrl[channel].intr_enable,
+ cy_writel(&ch_ctrl->intr_enable,
C_IN_TXBEMPTY | C_IN_TXLOWWM | C_IN_RXHIWM |
C_IN_RXNNDT | C_IN_MDCD);
#else
- cy_writel(&ch_ctrl[channel].intr_enable, C_IN_MDCD);
+ cy_writel(&ch_ctrl->intr_enable, C_IN_MDCD);
#endif /* CONFIG_CYZ_INTR */
#endif /* Z_WAKE */
@@ -1969,32 +1389,22 @@ static int startup(struct cyclades_port *info)
/* set timeout !!! */
/* set RTS and DTR !!! */
- cy_writel(&ch_ctrl[channel].rs_control,
- readl(&ch_ctrl[channel].rs_control) | C_RS_RTS |
- C_RS_DTR);
- retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM, 0L);
- if (retval != 0) {
- printk(KERN_ERR "cyc:startup(3) retval on ttyC%d was "
- "%x\n", info->line, retval);
- }
-#ifdef CY_DEBUG_DTR
- printk(KERN_DEBUG "cyc:startup raising Z DTR\n");
-#endif
+ tty_port_raise_dtr_rts(&info->port);
/* enable send, recv, modem !!! */
+ }
- info->port.flags |= ASYNC_INITIALIZED;
- if (info->port.tty)
- clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
- info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
- info->breakon = info->breakoff = 0;
- memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats));
- info->idle_stats.in_use =
- info->idle_stats.recv_idle =
- info->idle_stats.xmit_idle = jiffies;
+ info->port.flags |= ASYNC_INITIALIZED;
- spin_unlock_irqrestore(&card->card_lock, flags);
- }
+ clear_bit(TTY_IO_ERROR, &tty->flags);
+ info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
+ info->breakon = info->breakoff = 0;
+ memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats));
+ info->idle_stats.in_use =
+ info->idle_stats.recv_idle =
+ info->idle_stats.xmit_idle = jiffies;
+
+ spin_unlock_irqrestore(&card->card_lock, flags);
#ifdef CY_DEBUG_OPEN
printk(KERN_DEBUG "cyc startup done\n");
@@ -2003,28 +1413,20 @@ static int startup(struct cyclades_port *info)
errout:
spin_unlock_irqrestore(&card->card_lock, flags);
+ free_page(page);
return retval;
} /* startup */
static void start_xmit(struct cyclades_port *info)
{
- struct cyclades_card *card;
+ struct cyclades_card *card = info->card;
unsigned long flags;
- void __iomem *base_addr;
- int chip, channel, index;
+ int channel = info->line - card->first_line;
- card = info->card;
- channel = info->line - card->first_line;
if (!cy_is_Z(card)) {
- chip = channel >> 2;
- channel &= 0x03;
- index = card->bus_index;
- base_addr = card->base_addr + (cy_chip_offset[chip] << index);
-
spin_lock_irqsave(&card->card_lock, flags);
- cy_writeb(base_addr + (CyCAR << index), channel);
- cy_writeb(base_addr + (CySRER << index),
- readb(base_addr + (CySRER << index)) | CyTxRdy);
+ cyy_writeb(info, CyCAR, channel & 0x03);
+ cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyTxRdy);
spin_unlock_irqrestore(&card->card_lock, flags);
} else {
#ifdef CONFIG_CYZ_INTR
@@ -2047,12 +1449,11 @@ static void start_xmit(struct cyclades_port *info)
* This routine shuts down a serial port; interrupts are disabled,
* and DTR is dropped if the hangup on close termio flag is on.
*/
-static void shutdown(struct cyclades_port *info)
+static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty)
{
struct cyclades_card *card;
unsigned long flags;
- void __iomem *base_addr;
- int chip, channel, index;
+ int channel;
if (!(info->port.flags & ASYNC_INITIALIZED))
return;
@@ -2060,21 +1461,10 @@ static void shutdown(struct cyclades_port *info)
card = info->card;
channel = info->line - card->first_line;
if (!cy_is_Z(card)) {
- chip = channel >> 2;
- channel &= 0x03;
- index = card->bus_index;
- base_addr = card->base_addr + (cy_chip_offset[chip] << index);
-
-#ifdef CY_DEBUG_OPEN
- printk(KERN_DEBUG "cyc shutdown Y card %d, chip %d, "
- "channel %d, base_addr %p\n",
- card, chip, channel, base_addr);
-#endif
-
spin_lock_irqsave(&card->card_lock, flags);
/* Clear delta_msr_wait queue to avoid mem leaks. */
- wake_up_interruptible(&info->delta_msr_wait);
+ wake_up_interruptible(&info->port.delta_msr_wait);
if (info->port.xmit_buf) {
unsigned char *temp;
@@ -2082,47 +1472,25 @@ static void shutdown(struct cyclades_port *info)
info->port.xmit_buf = NULL;
free_page((unsigned long)temp);
}
- cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
- if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) {
- cy_writeb(base_addr + (CyMSVR1 << index), ~CyRTS);
- cy_writeb(base_addr + (CyMSVR2 << index), ~CyDTR);
-#ifdef CY_DEBUG_DTR
- printk(KERN_DEBUG "cyc shutdown dropping DTR\n");
- printk(KERN_DEBUG " status: 0x%x, 0x%x\n",
- readb(base_addr + (CyMSVR1 << index)),
- readb(base_addr + (CyMSVR2 << index)));
-#endif
- }
- cyy_issue_cmd(base_addr, CyCHAN_CTL | CyDIS_RCVR, index);
+ if (tty->termios->c_cflag & HUPCL)
+ cyy_change_rts_dtr(info, 0, TIOCM_RTS | TIOCM_DTR);
+
+ cyy_issue_cmd(info, CyCHAN_CTL | CyDIS_RCVR);
/* it may be appropriate to clear _XMIT at
some later date (after testing)!!! */
- if (info->port.tty)
- set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+ set_bit(TTY_IO_ERROR, &tty->flags);
info->port.flags &= ~ASYNC_INITIALIZED;
spin_unlock_irqrestore(&card->card_lock, flags);
} else {
- struct FIRM_ID __iomem *firm_id;
- struct ZFW_CTRL __iomem *zfw_ctrl;
- struct BOARD_CTRL __iomem *board_ctrl;
- struct CH_CTRL __iomem *ch_ctrl;
- int retval;
-
- base_addr = card->base_addr;
#ifdef CY_DEBUG_OPEN
printk(KERN_DEBUG "cyc shutdown Z card %d, channel %d, "
- "base_addr %p\n", card, channel, base_addr);
+ "base_addr %p\n", card, channel, card->base_addr);
#endif
- firm_id = base_addr + ID_ADDRESS;
if (!cyz_is_loaded(card))
return;
- zfw_ctrl = card->base_addr +
- (readl(&firm_id->zfwctrl_addr) & 0xfffff);
- board_ctrl = &zfw_ctrl->board_ctrl;
- ch_ctrl = zfw_ctrl->ch_ctrl;
-
spin_lock_irqsave(&card->card_lock, flags);
if (info->port.xmit_buf) {
@@ -2132,23 +1500,10 @@ static void shutdown(struct cyclades_port *info)
free_page((unsigned long)temp);
}
- if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) {
- cy_writel(&ch_ctrl[channel].rs_control,
- (__u32)(readl(&ch_ctrl[channel].rs_control) &
- ~(C_RS_RTS | C_RS_DTR)));
- retval = cyz_issue_cmd(info->card, channel,
- C_CM_IOCTLM, 0L);
- if (retval != 0) {
- printk(KERN_ERR"cyc:shutdown retval on ttyC%d "
- "was %x\n", info->line, retval);
- }
-#ifdef CY_DEBUG_DTR
- printk(KERN_DEBUG "cyc:shutdown dropping Z DTR\n");
-#endif
- }
+ if (tty->termios->c_cflag & HUPCL)
+ tty_port_lower_dtr_rts(&info->port);
- if (info->port.tty)
- set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+ set_bit(TTY_IO_ERROR, &tty->flags);
info->port.flags &= ~ASYNC_INITIALIZED;
spin_unlock_irqrestore(&card->card_lock, flags);
@@ -2165,199 +1520,6 @@ static void shutdown(struct cyclades_port *info)
* ------------------------------------------------------------
*/
-static int
-block_til_ready(struct tty_struct *tty, struct file *filp,
- struct cyclades_port *info)
-{
- DECLARE_WAITQUEUE(wait, current);
- struct cyclades_card *cinfo;
- unsigned long flags;
- int chip, channel, index;
- int retval;
- void __iomem *base_addr;
-
- cinfo = info->card;
- channel = info->line - cinfo->first_line;
-
- /*
- * If the device is in the middle of being closed, then block
- * until it's done, and then try again.
- */
- if (tty_hung_up_p(filp) || (info->port.flags & ASYNC_CLOSING)) {
- wait_event_interruptible(info->port.close_wait,
- !(info->port.flags & ASYNC_CLOSING));
- return (info->port.flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS;
- }
-
- /*
- * If non-blocking mode is set, then make the check up front
- * and then exit.
- */
- if ((filp->f_flags & O_NONBLOCK) ||
- (tty->flags & (1 << TTY_IO_ERROR))) {
- info->port.flags |= ASYNC_NORMAL_ACTIVE;
- return 0;
- }
-
- /*
- * Block waiting for the carrier detect and the line to become
- * free (i.e., not in use by the callout). While we are in
- * this loop, info->port.count is dropped by one, so that
- * cy_close() knows when to free things. We restore it upon
- * exit, either normal or abnormal.
- */
- retval = 0;
- add_wait_queue(&info->port.open_wait, &wait);
-#ifdef CY_DEBUG_OPEN
- printk(KERN_DEBUG "cyc block_til_ready before block: ttyC%d, "
- "count = %d\n", info->line, info->port.count);
-#endif
- spin_lock_irqsave(&cinfo->card_lock, flags);
- if (!tty_hung_up_p(filp))
- info->port.count--;
- spin_unlock_irqrestore(&cinfo->card_lock, flags);
-#ifdef CY_DEBUG_COUNT
- printk(KERN_DEBUG "cyc block_til_ready: (%d): decrementing count to "
- "%d\n", current->pid, info->port.count);
-#endif
- info->port.blocked_open++;
-
- if (!cy_is_Z(cinfo)) {
- chip = channel >> 2;
- channel &= 0x03;
- index = cinfo->bus_index;
- base_addr = cinfo->base_addr + (cy_chip_offset[chip] << index);
-
- while (1) {
- spin_lock_irqsave(&cinfo->card_lock, flags);
- if ((tty->termios->c_cflag & CBAUD)) {
- cy_writeb(base_addr + (CyCAR << index),
- (u_char) channel);
- cy_writeb(base_addr + (CyMSVR1 << index),
- CyRTS);
- cy_writeb(base_addr + (CyMSVR2 << index),
- CyDTR);
-#ifdef CY_DEBUG_DTR
- printk(KERN_DEBUG "cyc:block_til_ready raising "
- "DTR\n");
- printk(KERN_DEBUG " status: 0x%x, 0x%x\n",
- readb(base_addr + (CyMSVR1 << index)),
- readb(base_addr + (CyMSVR2 << index)));
-#endif
- }
- spin_unlock_irqrestore(&cinfo->card_lock, flags);
-
- set_current_state(TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp) ||
- !(info->port.flags & ASYNC_INITIALIZED)) {
- retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
- -EAGAIN : -ERESTARTSYS);
- break;
- }
-
- spin_lock_irqsave(&cinfo->card_lock, flags);
- cy_writeb(base_addr + (CyCAR << index),
- (u_char) channel);
- if (!(info->port.flags & ASYNC_CLOSING) && (C_CLOCAL(tty) ||
- (readb(base_addr +
- (CyMSVR1 << index)) & CyDCD))) {
- spin_unlock_irqrestore(&cinfo->card_lock, flags);
- break;
- }
- spin_unlock_irqrestore(&cinfo->card_lock, flags);
-
- if (signal_pending(current)) {
- retval = -ERESTARTSYS;
- break;
- }
-#ifdef CY_DEBUG_OPEN
- printk(KERN_DEBUG "cyc block_til_ready blocking: "
- "ttyC%d, count = %d\n",
- info->line, info->port.count);
-#endif
- schedule();
- }
- } else {
- struct FIRM_ID __iomem *firm_id;
- struct ZFW_CTRL __iomem *zfw_ctrl;
- struct BOARD_CTRL __iomem *board_ctrl;
- struct CH_CTRL __iomem *ch_ctrl;
-
- base_addr = cinfo->base_addr;
- firm_id = base_addr + ID_ADDRESS;
- if (!cyz_is_loaded(cinfo)) {
- __set_current_state(TASK_RUNNING);
- remove_wait_queue(&info->port.open_wait, &wait);
- return -EINVAL;
- }
-
- zfw_ctrl = base_addr + (readl(&firm_id->zfwctrl_addr)
- & 0xfffff);
- board_ctrl = &zfw_ctrl->board_ctrl;
- ch_ctrl = zfw_ctrl->ch_ctrl;
-
- while (1) {
- if ((tty->termios->c_cflag & CBAUD)) {
- cy_writel(&ch_ctrl[channel].rs_control,
- readl(&ch_ctrl[channel].rs_control) |
- C_RS_RTS | C_RS_DTR);
- retval = cyz_issue_cmd(cinfo,
- channel, C_CM_IOCTLM, 0L);
- if (retval != 0) {
- printk(KERN_ERR "cyc:block_til_ready "
- "retval on ttyC%d was %x\n",
- info->line, retval);
- }
-#ifdef CY_DEBUG_DTR
- printk(KERN_DEBUG "cyc:block_til_ready raising "
- "Z DTR\n");
-#endif
- }
-
- set_current_state(TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp) ||
- !(info->port.flags & ASYNC_INITIALIZED)) {
- retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
- -EAGAIN : -ERESTARTSYS);
- break;
- }
- if (!(info->port.flags & ASYNC_CLOSING) && (C_CLOCAL(tty) ||
- (readl(&ch_ctrl[channel].rs_status) &
- C_RS_DCD))) {
- break;
- }
- if (signal_pending(current)) {
- retval = -ERESTARTSYS;
- break;
- }
-#ifdef CY_DEBUG_OPEN
- printk(KERN_DEBUG "cyc block_til_ready blocking: "
- "ttyC%d, count = %d\n",
- info->line, info->port.count);
-#endif
- schedule();
- }
- }
- __set_current_state(TASK_RUNNING);
- remove_wait_queue(&info->port.open_wait, &wait);
- if (!tty_hung_up_p(filp)) {
- info->port.count++;
-#ifdef CY_DEBUG_COUNT
- printk(KERN_DEBUG "cyc:block_til_ready (%d): incrementing "
- "count to %d\n", current->pid, info->port.count);
-#endif
- }
- info->port.blocked_open--;
-#ifdef CY_DEBUG_OPEN
- printk(KERN_DEBUG "cyc:block_til_ready after blocking: ttyC%d, "
- "count = %d\n", info->line, info->port.count);
-#endif
- if (retval)
- return retval;
- info->port.flags |= ASYNC_NORMAL_ACTIVE;
- return 0;
-} /* block_til_ready */
-
/*
* This routine is called whenever a serial port is opened. It
* performs the serial-specific initialization for the tty structure.
@@ -2436,7 +1598,6 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
printk(KERN_DEBUG "cyc:cy_open ttyC%d\n", info->line);
#endif
tty->driver_data = info;
- info->port.tty = tty;
if (serial_paranoia_check(info, tty->name, "cy_open"))
return -ENODEV;
@@ -2462,11 +1623,11 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
/*
* Start up serial port
*/
- retval = startup(info);
+ retval = cy_startup(info, tty);
if (retval)
return retval;
- retval = block_til_ready(tty, filp, info);
+ retval = tty_port_block_til_ready(&info->port, tty, filp);
if (retval) {
#ifdef CY_DEBUG_OPEN
printk(KERN_DEBUG "cyc:cy_open returning after block_til_ready "
@@ -2476,6 +1637,7 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
}
info->throttle = 0;
+ tty_port_tty_set(&info->port, tty);
#ifdef CY_DEBUG_OPEN
printk(KERN_DEBUG "cyc:cy_open done\n");
@@ -2490,8 +1652,6 @@ static void cy_wait_until_sent(struct tty_struct *tty, int timeout)
{
struct cyclades_card *card;
struct cyclades_port *info = tty->driver_data;
- void __iomem *base_addr;
- int chip, channel, index;
unsigned long orig_jiffies;
int char_time;
@@ -2535,13 +1695,8 @@ static void cy_wait_until_sent(struct tty_struct *tty, int timeout)
timeout, char_time, jiffies);
#endif
card = info->card;
- channel = (info->line) - (card->first_line);
if (!cy_is_Z(card)) {
- chip = channel >> 2;
- channel &= 0x03;
- index = card->bus_index;
- base_addr = card->base_addr + (cy_chip_offset[chip] << index);
- while (readb(base_addr + (CySRER << index)) & CyTxRdy) {
+ while (cyy_readb(info, CySRER) & CyTxRdy) {
#ifdef CY_DEBUG_WAIT_UNTIL_SENT
printk(KERN_DEBUG "Not clean (jiff=%lu)...", jiffies);
#endif
@@ -2595,103 +1750,37 @@ static void cy_flush_buffer(struct tty_struct *tty)
} /* cy_flush_buffer */
-/*
- * This routine is called when a particular tty device is closed.
- */
-static void cy_close(struct tty_struct *tty, struct file *filp)
+static void cy_do_close(struct tty_port *port)
{
- struct cyclades_port *info = tty->driver_data;
+ struct cyclades_port *info = container_of(port, struct cyclades_port,
+ port);
struct cyclades_card *card;
unsigned long flags;
-
-#ifdef CY_DEBUG_OTHER
- printk(KERN_DEBUG "cyc:cy_close ttyC%d\n", info->line);
-#endif
-
- if (!info || serial_paranoia_check(info, tty->name, "cy_close"))
- return;
+ int channel;
card = info->card;
-
- spin_lock_irqsave(&card->card_lock, flags);
- /* If the TTY is being hung up, nothing to do */
- if (tty_hung_up_p(filp)) {
- spin_unlock_irqrestore(&card->card_lock, flags);
- return;
- }
-#ifdef CY_DEBUG_OPEN
- printk(KERN_DEBUG "cyc:cy_close ttyC%d, count = %d\n", info->line,
- info->port.count);
-#endif
- if ((tty->count == 1) && (info->port.count != 1)) {
- /*
- * Uh, oh. tty->count is 1, which means that the tty
- * structure will be freed. Info->count should always
- * be one in these conditions. If it's greater than
- * one, we've got real problems, since it means the
- * serial port won't be shutdown.
- */
- printk(KERN_ERR "cyc:cy_close: bad serial port count; "
- "tty->count is 1, info->port.count is %d\n", info->port.count);
- info->port.count = 1;
- }
-#ifdef CY_DEBUG_COUNT
- printk(KERN_DEBUG "cyc:cy_close at (%d): decrementing count to %d\n",
- current->pid, info->port.count - 1);
-#endif
- if (--info->port.count < 0) {
-#ifdef CY_DEBUG_COUNT
- printk(KERN_DEBUG "cyc:cyc_close setting count to 0\n");
-#endif
- info->port.count = 0;
- }
- if (info->port.count) {
- spin_unlock_irqrestore(&card->card_lock, flags);
- return;
- }
- info->port.flags |= ASYNC_CLOSING;
-
- /*
- * Now we wait for the transmit buffer to clear; and we notify
- * the line discipline to only process XON/XOFF characters.
- */
- tty->closing = 1;
- spin_unlock_irqrestore(&card->card_lock, flags);
- if (info->port.closing_wait != CY_CLOSING_WAIT_NONE)
- tty_wait_until_sent(tty, info->port.closing_wait);
-
+ channel = info->line - card->first_line;
spin_lock_irqsave(&card->card_lock, flags);
if (!cy_is_Z(card)) {
- int channel = info->line - card->first_line;
- int index = card->bus_index;
- void __iomem *base_addr = card->base_addr +
- (cy_chip_offset[channel >> 2] << index);
/* Stop accepting input */
- channel &= 0x03;
- cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
- cy_writeb(base_addr + (CySRER << index),
- readb(base_addr + (CySRER << index)) & ~CyRxData);
+ cyy_writeb(info, CyCAR, channel & 0x03);
+ cyy_writeb(info, CySRER, cyy_readb(info, CySRER) & ~CyRxData);
if (info->port.flags & ASYNC_INITIALIZED) {
/* Waiting for on-board buffers to be empty before
closing the port */
spin_unlock_irqrestore(&card->card_lock, flags);
- cy_wait_until_sent(tty, info->timeout);
+ cy_wait_until_sent(port->tty, info->timeout);
spin_lock_irqsave(&card->card_lock, flags);
}
} else {
#ifdef Z_WAKE
/* Waiting for on-board buffers to be empty before closing
the port */
- void __iomem *base_addr = card->base_addr;
- struct FIRM_ID __iomem *firm_id = base_addr + ID_ADDRESS;
- struct ZFW_CTRL __iomem *zfw_ctrl =
- base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
- struct CH_CTRL __iomem *ch_ctrl = zfw_ctrl->ch_ctrl;
- int channel = info->line - card->first_line;
+ struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
int retval;
- if (readl(&ch_ctrl[channel].flow_status) != C_FS_TXIDLE) {
+ if (readl(&ch_ctrl->flow_status) != C_FS_TXIDLE) {
retval = cyz_issue_cmd(card, channel, C_CM_IOCTLW, 0L);
if (retval != 0) {
printk(KERN_DEBUG "cyc:cy_close retval on "
@@ -2703,32 +1792,19 @@ static void cy_close(struct tty_struct *tty, struct file *filp)
}
#endif
}
-
spin_unlock_irqrestore(&card->card_lock, flags);
- shutdown(info);
- cy_flush_buffer(tty);
- tty_ldisc_flush(tty);
- spin_lock_irqsave(&card->card_lock, flags);
-
- tty->closing = 0;
- info->port.tty = NULL;
- if (info->port.blocked_open) {
- spin_unlock_irqrestore(&card->card_lock, flags);
- if (info->port.close_delay) {
- msleep_interruptible(jiffies_to_msecs
- (info->port.close_delay));
- }
- wake_up_interruptible(&info->port.open_wait);
- spin_lock_irqsave(&card->card_lock, flags);
- }
- info->port.flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
- wake_up_interruptible(&info->port.close_wait);
-
-#ifdef CY_DEBUG_OTHER
- printk(KERN_DEBUG "cyc:cy_close done\n");
-#endif
+ cy_shutdown(info, port->tty);
+}
- spin_unlock_irqrestore(&card->card_lock, flags);
+/*
+ * This routine is called when a particular tty device is closed.
+ */
+static void cy_close(struct tty_struct *tty, struct file *filp)
+{
+ struct cyclades_port *info = tty->driver_data;
+ if (!info || serial_paranoia_check(info, tty->name, "cy_close"))
+ return;
+ tty_port_close(&info->port, tty, filp);
} /* cy_close */
/* This routine gets called when tty_write has put something into
@@ -2871,18 +1947,13 @@ static int cy_write_room(struct tty_struct *tty)
static int cy_chars_in_buffer(struct tty_struct *tty)
{
- struct cyclades_card *card;
struct cyclades_port *info = tty->driver_data;
- int channel;
if (serial_paranoia_check(info, tty->name, "cy_chars_in_buffer"))
return 0;
- card = info->card;
- channel = (info->line) - (card->first_line);
-
#ifdef Z_EXT_CHARS_IN_BUFFER
- if (!cy_is_Z(card)) {
+ if (!cy_is_Z(info->card)) {
#endif /* Z_EXT_CHARS_IN_BUFFER */
#ifdef CY_DEBUG_IO
printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n",
@@ -2891,20 +1962,11 @@ static int cy_chars_in_buffer(struct tty_struct *tty)
return info->xmit_cnt;
#ifdef Z_EXT_CHARS_IN_BUFFER
} else {
- static struct FIRM_ID *firm_id;
- static struct ZFW_CTRL *zfw_ctrl;
- static struct CH_CTRL *ch_ctrl;
- static struct BUF_CTRL *buf_ctrl;
+ struct BUF_CTRL __iomem *buf_ctrl = info->u.cyz.buf_ctrl;
int char_count;
__u32 tx_put, tx_get, tx_bufsize;
lock_kernel();
- firm_id = card->base_addr + ID_ADDRESS;
- zfw_ctrl = card->base_addr +
- (readl(&firm_id->zfwctrl_addr) & 0xfffff);
- ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]);
- buf_ctrl = &(zfw_ctrl->buf_ctrl[channel]);
-
tx_get = readl(&buf_ctrl->tx_get);
tx_put = readl(&buf_ctrl->tx_put);
tx_bufsize = readl(&buf_ctrl->tx_bufsize);
@@ -2957,48 +2019,44 @@ static void cyy_baud_calc(struct cyclades_port *info, __u32 baud)
* This routine finds or computes the various line characteristics.
* It used to be called config_setup
*/
-static void set_line_char(struct cyclades_port *info)
+static void cy_set_line_char(struct cyclades_port *info, struct tty_struct *tty)
{
struct cyclades_card *card;
unsigned long flags;
- void __iomem *base_addr;
- int chip, channel, index;
+ int channel;
unsigned cflag, iflag;
int baud, baud_rate = 0;
int i;
- if (!info->port.tty || !info->port.tty->termios)
+ if (!tty->termios) /* XXX can this happen at all? */
return;
if (info->line == -1)
return;
- cflag = info->port.tty->termios->c_cflag;
- iflag = info->port.tty->termios->c_iflag;
+ cflag = tty->termios->c_cflag;
+ iflag = tty->termios->c_iflag;
/*
* Set up the tty->alt_speed kludge
*/
- if (info->port.tty) {
- if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
- info->port.tty->alt_speed = 57600;
- if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
- info->port.tty->alt_speed = 115200;
- if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
- info->port.tty->alt_speed = 230400;
- if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
- info->port.tty->alt_speed = 460800;
- }
+ if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+ tty->alt_speed = 57600;
+ if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+ tty->alt_speed = 115200;
+ if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+ tty->alt_speed = 230400;
+ if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+ tty->alt_speed = 460800;
card = info->card;
channel = info->line - card->first_line;
if (!cy_is_Z(card)) {
-
- index = card->bus_index;
+ u32 cflags;
/* baud rate */
- baud = tty_get_baud_rate(info->port.tty);
+ baud = tty_get_baud_rate(tty);
if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
ASYNC_SPD_CUST) {
if (info->custom_divisor)
@@ -3107,124 +2165,68 @@ static void set_line_char(struct cyclades_port *info)
cable. Contact Marcio Saito for details.
***********************************************/
- chip = channel >> 2;
channel &= 0x03;
- base_addr = card->base_addr + (cy_chip_offset[chip] << index);
spin_lock_irqsave(&card->card_lock, flags);
- cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
+ cyy_writeb(info, CyCAR, channel);
/* tx and rx baud rate */
- cy_writeb(base_addr + (CyTCOR << index), info->tco);
- cy_writeb(base_addr + (CyTBPR << index), info->tbpr);
- cy_writeb(base_addr + (CyRCOR << index), info->rco);
- cy_writeb(base_addr + (CyRBPR << index), info->rbpr);
+ cyy_writeb(info, CyTCOR, info->tco);
+ cyy_writeb(info, CyTBPR, info->tbpr);
+ cyy_writeb(info, CyRCOR, info->rco);
+ cyy_writeb(info, CyRBPR, info->rbpr);
/* set line characteristics according configuration */
- cy_writeb(base_addr + (CySCHR1 << index),
- START_CHAR(info->port.tty));
- cy_writeb(base_addr + (CySCHR2 << index), STOP_CHAR(info->port.tty));
- cy_writeb(base_addr + (CyCOR1 << index), info->cor1);
- cy_writeb(base_addr + (CyCOR2 << index), info->cor2);
- cy_writeb(base_addr + (CyCOR3 << index), info->cor3);
- cy_writeb(base_addr + (CyCOR4 << index), info->cor4);
- cy_writeb(base_addr + (CyCOR5 << index), info->cor5);
+ cyy_writeb(info, CySCHR1, START_CHAR(tty));
+ cyy_writeb(info, CySCHR2, STOP_CHAR(tty));
+ cyy_writeb(info, CyCOR1, info->cor1);
+ cyy_writeb(info, CyCOR2, info->cor2);
+ cyy_writeb(info, CyCOR3, info->cor3);
+ cyy_writeb(info, CyCOR4, info->cor4);
+ cyy_writeb(info, CyCOR5, info->cor5);
- cyy_issue_cmd(base_addr, CyCOR_CHANGE | CyCOR1ch | CyCOR2ch |
- CyCOR3ch, index);
+ cyy_issue_cmd(info, CyCOR_CHANGE | CyCOR1ch | CyCOR2ch |
+ CyCOR3ch);
/* !!! Is this needed? */
- cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
- cy_writeb(base_addr + (CyRTPR << index),
+ cyy_writeb(info, CyCAR, channel);
+ cyy_writeb(info, CyRTPR,
(info->default_timeout ? info->default_timeout : 0x02));
/* 10ms rx timeout */
- if (C_CLOCAL(info->port.tty)) {
- /* without modem intr */
- cy_writeb(base_addr + (CySRER << index),
- readb(base_addr + (CySRER << index)) | CyMdmCh);
- /* act on 1->0 modem transitions */
- if ((cflag & CRTSCTS) && info->rflow) {
- cy_writeb(base_addr + (CyMCOR1 << index),
- (CyCTS | rflow_thr[i]));
- } else {
- cy_writeb(base_addr + (CyMCOR1 << index),
- CyCTS);
- }
- /* act on 0->1 modem transitions */
- cy_writeb(base_addr + (CyMCOR2 << index), CyCTS);
- } else {
- /* without modem intr */
- cy_writeb(base_addr + (CySRER << index),
- readb(base_addr +
- (CySRER << index)) | CyMdmCh);
- /* act on 1->0 modem transitions */
- if ((cflag & CRTSCTS) && info->rflow) {
- cy_writeb(base_addr + (CyMCOR1 << index),
- (CyDSR | CyCTS | CyRI | CyDCD |
- rflow_thr[i]));
- } else {
- cy_writeb(base_addr + (CyMCOR1 << index),
- CyDSR | CyCTS | CyRI | CyDCD);
- }
- /* act on 0->1 modem transitions */
- cy_writeb(base_addr + (CyMCOR2 << index),
- CyDSR | CyCTS | CyRI | CyDCD);
- }
+ cflags = CyCTS;
+ if (!C_CLOCAL(tty))
+ cflags |= CyDSR | CyRI | CyDCD;
+ /* without modem intr */
+ cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyMdmCh);
+ /* act on 1->0 modem transitions */
+ if ((cflag & CRTSCTS) && info->rflow)
+ cyy_writeb(info, CyMCOR1, cflags | rflow_thr[i]);
+ else
+ cyy_writeb(info, CyMCOR1, cflags);
+ /* act on 0->1 modem transitions */
+ cyy_writeb(info, CyMCOR2, cflags);
- if (i == 0) { /* baud rate is zero, turn off line */
- if (info->rtsdtr_inv) {
- cy_writeb(base_addr + (CyMSVR1 << index),
- ~CyRTS);
- } else {
- cy_writeb(base_addr + (CyMSVR2 << index),
- ~CyDTR);
- }
-#ifdef CY_DEBUG_DTR
- printk(KERN_DEBUG "cyc:set_line_char dropping DTR\n");
- printk(KERN_DEBUG " status: 0x%x, 0x%x\n",
- readb(base_addr + (CyMSVR1 << index)),
- readb(base_addr + (CyMSVR2 << index)));
-#endif
- } else {
- if (info->rtsdtr_inv) {
- cy_writeb(base_addr + (CyMSVR1 << index),
- CyRTS);
- } else {
- cy_writeb(base_addr + (CyMSVR2 << index),
- CyDTR);
- }
-#ifdef CY_DEBUG_DTR
- printk(KERN_DEBUG "cyc:set_line_char raising DTR\n");
- printk(KERN_DEBUG " status: 0x%x, 0x%x\n",
- readb(base_addr + (CyMSVR1 << index)),
- readb(base_addr + (CyMSVR2 << index)));
-#endif
- }
+ if (i == 0) /* baud rate is zero, turn off line */
+ cyy_change_rts_dtr(info, 0, TIOCM_DTR);
+ else
+ cyy_change_rts_dtr(info, TIOCM_DTR, 0);
- if (info->port.tty)
- clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
+ clear_bit(TTY_IO_ERROR, &tty->flags);
spin_unlock_irqrestore(&card->card_lock, flags);
} else {
- struct FIRM_ID __iomem *firm_id;
- struct ZFW_CTRL __iomem *zfw_ctrl;
- struct CH_CTRL __iomem *ch_ctrl;
+ struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
__u32 sw_flow;
int retval;
- firm_id = card->base_addr + ID_ADDRESS;
if (!cyz_is_loaded(card))
return;
- zfw_ctrl = card->base_addr +
- (readl(&firm_id->zfwctrl_addr) & 0xfffff);
- ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]);
-
/* baud rate */
- baud = tty_get_baud_rate(info->port.tty);
+ baud = tty_get_baud_rate(tty);
if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
ASYNC_SPD_CUST) {
if (info->custom_divisor)
@@ -3335,45 +2337,38 @@ static void set_line_char(struct cyclades_port *info)
"was %x\n", info->line, retval);
}
- if (info->port.tty)
- clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
+ clear_bit(TTY_IO_ERROR, &tty->flags);
}
} /* set_line_char */
-static int
-get_serial_info(struct cyclades_port *info,
+static int cy_get_serial_info(struct cyclades_port *info,
struct serial_struct __user *retinfo)
{
- struct serial_struct tmp;
struct cyclades_card *cinfo = info->card;
-
- if (!retinfo)
- return -EFAULT;
- memset(&tmp, 0, sizeof(tmp));
- tmp.type = info->type;
- tmp.line = info->line;
- tmp.port = (info->card - cy_card) * 0x100 + info->line -
- cinfo->first_line;
- tmp.irq = cinfo->irq;
- tmp.flags = info->port.flags;
- tmp.close_delay = info->port.close_delay;
- tmp.closing_wait = info->port.closing_wait;
- tmp.baud_base = info->baud;
- tmp.custom_divisor = info->custom_divisor;
- tmp.hub6 = 0; /*!!! */
+ struct serial_struct tmp = {
+ .type = info->type,
+ .line = info->line,
+ .port = (info->card - cy_card) * 0x100 + info->line -
+ cinfo->first_line,
+ .irq = cinfo->irq,
+ .flags = info->port.flags,
+ .close_delay = info->port.close_delay,
+ .closing_wait = info->port.closing_wait,
+ .baud_base = info->baud,
+ .custom_divisor = info->custom_divisor,
+ .hub6 = 0, /*!!! */
+ };
return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0;
-} /* get_serial_info */
+}
static int
-set_serial_info(struct cyclades_port *info,
+cy_set_serial_info(struct cyclades_port *info, struct tty_struct *tty,
struct serial_struct __user *new_info)
{
struct serial_struct new_serial;
- struct cyclades_port old_info;
if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
return -EFAULT;
- old_info = *info;
if (!capable(CAP_SYS_ADMIN)) {
if (new_serial.close_delay != info->port.close_delay ||
@@ -3403,10 +2398,10 @@ set_serial_info(struct cyclades_port *info,
check_and_exit:
if (info->port.flags & ASYNC_INITIALIZED) {
- set_line_char(info);
+ cy_set_line_char(info, tty);
return 0;
} else {
- return startup(info);
+ return cy_startup(info, tty);
}
} /* set_serial_info */
@@ -3422,24 +2417,14 @@ check_and_exit:
*/
static int get_lsr_info(struct cyclades_port *info, unsigned int __user *value)
{
- struct cyclades_card *card;
- int chip, channel, index;
- unsigned char status;
+ struct cyclades_card *card = info->card;
unsigned int result;
unsigned long flags;
- void __iomem *base_addr;
+ u8 status;
- card = info->card;
- channel = (info->line) - (card->first_line);
if (!cy_is_Z(card)) {
- chip = channel >> 2;
- channel &= 0x03;
- index = card->bus_index;
- base_addr = card->base_addr + (cy_chip_offset[chip] << index);
-
spin_lock_irqsave(&card->card_lock, flags);
- status = readb(base_addr + (CySRER << index)) &
- (CyTxRdy | CyTxMpty);
+ status = cyy_readb(info, CySRER) & (CyTxRdy | CyTxMpty);
spin_unlock_irqrestore(&card->card_lock, flags);
result = (status ? 0 : TIOCSER_TEMT);
} else {
@@ -3453,34 +2438,23 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file)
{
struct cyclades_port *info = tty->driver_data;
struct cyclades_card *card;
- int chip, channel, index;
- void __iomem *base_addr;
- unsigned long flags;
- unsigned char status;
- unsigned long lstatus;
- unsigned int result;
- struct FIRM_ID __iomem *firm_id;
- struct ZFW_CTRL __iomem *zfw_ctrl;
- struct BOARD_CTRL __iomem *board_ctrl;
- struct CH_CTRL __iomem *ch_ctrl;
+ int result;
if (serial_paranoia_check(info, tty->name, __func__))
return -ENODEV;
- lock_kernel();
-
card = info->card;
- channel = info->line - card->first_line;
+
+ lock_kernel();
if (!cy_is_Z(card)) {
- chip = channel >> 2;
- channel &= 0x03;
- index = card->bus_index;
- base_addr = card->base_addr + (cy_chip_offset[chip] << index);
+ unsigned long flags;
+ int channel = info->line - card->first_line;
+ u8 status;
spin_lock_irqsave(&card->card_lock, flags);
- cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
- status = readb(base_addr + (CyMSVR1 << index));
- status |= readb(base_addr + (CyMSVR2 << index));
+ cyy_writeb(info, CyCAR, channel & 0x03);
+ status = cyy_readb(info, CyMSVR1);
+ status |= cyy_readb(info, CyMSVR2);
spin_unlock_irqrestore(&card->card_lock, flags);
if (info->rtsdtr_inv) {
@@ -3495,27 +2469,22 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file)
((status & CyDSR) ? TIOCM_DSR : 0) |
((status & CyCTS) ? TIOCM_CTS : 0);
} else {
- base_addr = card->base_addr;
- firm_id = card->base_addr + ID_ADDRESS;
- if (cyz_is_loaded(card)) {
- zfw_ctrl = card->base_addr +
- (readl(&firm_id->zfwctrl_addr) & 0xfffff);
- board_ctrl = &zfw_ctrl->board_ctrl;
- ch_ctrl = zfw_ctrl->ch_ctrl;
- lstatus = readl(&ch_ctrl[channel].rs_status);
- result = ((lstatus & C_RS_RTS) ? TIOCM_RTS : 0) |
- ((lstatus & C_RS_DTR) ? TIOCM_DTR : 0) |
- ((lstatus & C_RS_DCD) ? TIOCM_CAR : 0) |
- ((lstatus & C_RS_RI) ? TIOCM_RNG : 0) |
- ((lstatus & C_RS_DSR) ? TIOCM_DSR : 0) |
- ((lstatus & C_RS_CTS) ? TIOCM_CTS : 0);
- } else {
- result = 0;
- unlock_kernel();
- return -ENODEV;
+ u32 lstatus;
+
+ if (!cyz_is_loaded(card)) {
+ result = -ENODEV;
+ goto end;
}
+ lstatus = readl(&info->u.cyz.ch_ctrl->rs_status);
+ result = ((lstatus & C_RS_RTS) ? TIOCM_RTS : 0) |
+ ((lstatus & C_RS_DTR) ? TIOCM_DTR : 0) |
+ ((lstatus & C_RS_DCD) ? TIOCM_CAR : 0) |
+ ((lstatus & C_RS_RI) ? TIOCM_RNG : 0) |
+ ((lstatus & C_RS_DSR) ? TIOCM_DSR : 0) |
+ ((lstatus & C_RS_CTS) ? TIOCM_CTS : 0);
}
+end:
unlock_kernel();
return result;
} /* cy_tiomget */
@@ -3526,150 +2495,53 @@ cy_tiocmset(struct tty_struct *tty, struct file *file,
{
struct cyclades_port *info = tty->driver_data;
struct cyclades_card *card;
- int chip, channel, index;
- void __iomem *base_addr;
unsigned long flags;
- struct FIRM_ID __iomem *firm_id;
- struct ZFW_CTRL __iomem *zfw_ctrl;
- struct BOARD_CTRL __iomem *board_ctrl;
- struct CH_CTRL __iomem *ch_ctrl;
- int retval;
if (serial_paranoia_check(info, tty->name, __func__))
return -ENODEV;
card = info->card;
- channel = (info->line) - (card->first_line);
if (!cy_is_Z(card)) {
- chip = channel >> 2;
- channel &= 0x03;
- index = card->bus_index;
- base_addr = card->base_addr + (cy_chip_offset[chip] << index);
+ spin_lock_irqsave(&card->card_lock, flags);
+ cyy_change_rts_dtr(info, set, clear);
+ spin_unlock_irqrestore(&card->card_lock, flags);
+ } else {
+ struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
+ int retval, channel = info->line - card->first_line;
+ u32 rs;
- if (set & TIOCM_RTS) {
- spin_lock_irqsave(&card->card_lock, flags);
- cy_writeb(base_addr + (CyCAR << index),
- (u_char) channel);
- if (info->rtsdtr_inv) {
- cy_writeb(base_addr + (CyMSVR2 << index),
- CyDTR);
- } else {
- cy_writeb(base_addr + (CyMSVR1 << index),
- CyRTS);
- }
- spin_unlock_irqrestore(&card->card_lock, flags);
- }
- if (clear & TIOCM_RTS) {
- spin_lock_irqsave(&card->card_lock, flags);
- cy_writeb(base_addr + (CyCAR << index),
- (u_char) channel);
- if (info->rtsdtr_inv) {
- cy_writeb(base_addr + (CyMSVR2 << index),
- ~CyDTR);
- } else {
- cy_writeb(base_addr + (CyMSVR1 << index),
- ~CyRTS);
- }
- spin_unlock_irqrestore(&card->card_lock, flags);
- }
+ if (!cyz_is_loaded(card))
+ return -ENODEV;
+
+ spin_lock_irqsave(&card->card_lock, flags);
+ rs = readl(&ch_ctrl->rs_control);
+ if (set & TIOCM_RTS)
+ rs |= C_RS_RTS;
+ if (clear & TIOCM_RTS)
+ rs &= ~C_RS_RTS;
if (set & TIOCM_DTR) {
- spin_lock_irqsave(&card->card_lock, flags);
- cy_writeb(base_addr + (CyCAR << index),
- (u_char) channel);
- if (info->rtsdtr_inv) {
- cy_writeb(base_addr + (CyMSVR1 << index),
- CyRTS);
- } else {
- cy_writeb(base_addr + (CyMSVR2 << index),
- CyDTR);
- }
+ rs |= C_RS_DTR;
#ifdef CY_DEBUG_DTR
- printk(KERN_DEBUG "cyc:set_modem_info raising DTR\n");
- printk(KERN_DEBUG " status: 0x%x, 0x%x\n",
- readb(base_addr + (CyMSVR1 << index)),
- readb(base_addr + (CyMSVR2 << index)));
+ printk(KERN_DEBUG "cyc:set_modem_info raising Z DTR\n");
#endif
- spin_unlock_irqrestore(&card->card_lock, flags);
}
if (clear & TIOCM_DTR) {
- spin_lock_irqsave(&card->card_lock, flags);
- cy_writeb(base_addr + (CyCAR << index),
- (u_char) channel);
- if (info->rtsdtr_inv) {
- cy_writeb(base_addr + (CyMSVR1 << index),
- ~CyRTS);
- } else {
- cy_writeb(base_addr + (CyMSVR2 << index),
- ~CyDTR);
- }
-
+ rs &= ~C_RS_DTR;
#ifdef CY_DEBUG_DTR
- printk(KERN_DEBUG "cyc:set_modem_info dropping DTR\n");
- printk(KERN_DEBUG " status: 0x%x, 0x%x\n",
- readb(base_addr + (CyMSVR1 << index)),
- readb(base_addr + (CyMSVR2 << index)));
+ printk(KERN_DEBUG "cyc:set_modem_info clearing "
+ "Z DTR\n");
#endif
- spin_unlock_irqrestore(&card->card_lock, flags);
}
- } else {
- base_addr = card->base_addr;
-
- firm_id = card->base_addr + ID_ADDRESS;
- if (cyz_is_loaded(card)) {
- zfw_ctrl = card->base_addr +
- (readl(&firm_id->zfwctrl_addr) & 0xfffff);
- board_ctrl = &zfw_ctrl->board_ctrl;
- ch_ctrl = zfw_ctrl->ch_ctrl;
-
- if (set & TIOCM_RTS) {
- spin_lock_irqsave(&card->card_lock, flags);
- cy_writel(&ch_ctrl[channel].rs_control,
- readl(&ch_ctrl[channel].rs_control) |
- C_RS_RTS);
- spin_unlock_irqrestore(&card->card_lock, flags);
- }
- if (clear & TIOCM_RTS) {
- spin_lock_irqsave(&card->card_lock, flags);
- cy_writel(&ch_ctrl[channel].rs_control,
- readl(&ch_ctrl[channel].rs_control) &
- ~C_RS_RTS);
- spin_unlock_irqrestore(&card->card_lock, flags);
- }
- if (set & TIOCM_DTR) {
- spin_lock_irqsave(&card->card_lock, flags);
- cy_writel(&ch_ctrl[channel].rs_control,
- readl(&ch_ctrl[channel].rs_control) |
- C_RS_DTR);
-#ifdef CY_DEBUG_DTR
- printk(KERN_DEBUG "cyc:set_modem_info raising "
- "Z DTR\n");
-#endif
- spin_unlock_irqrestore(&card->card_lock, flags);
- }
- if (clear & TIOCM_DTR) {
- spin_lock_irqsave(&card->card_lock, flags);
- cy_writel(&ch_ctrl[channel].rs_control,
- readl(&ch_ctrl[channel].rs_control) &
- ~C_RS_DTR);
-#ifdef CY_DEBUG_DTR
- printk(KERN_DEBUG "cyc:set_modem_info clearing "
- "Z DTR\n");
-#endif
- spin_unlock_irqrestore(&card->card_lock, flags);
- }
- } else {
- return -ENODEV;
- }
- spin_lock_irqsave(&card->card_lock, flags);
+ cy_writel(&ch_ctrl->rs_control, rs);
retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM, 0L);
+ spin_unlock_irqrestore(&card->card_lock, flags);
if (retval != 0) {
printk(KERN_ERR "cyc:set_modem_info retval on ttyC%d "
"was %x\n", info->line, retval);
}
- spin_unlock_irqrestore(&card->card_lock, flags);
}
return 0;
-} /* cy_tiocmset */
+}
/*
* cy_break() --- routine which turns the break handling on or off
@@ -3734,41 +2606,18 @@ static int cy_break(struct tty_struct *tty, int break_state)
return retval;
} /* cy_break */
-static int get_mon_info(struct cyclades_port *info,
- struct cyclades_monitor __user *mon)
-{
-
- if (copy_to_user(mon, &info->mon, sizeof(struct cyclades_monitor)))
- return -EFAULT;
- info->mon.int_count = 0;
- info->mon.char_count = 0;
- info->mon.char_max = 0;
- info->mon.char_last = 0;
- return 0;
-} /* get_mon_info */
-
static int set_threshold(struct cyclades_port *info, unsigned long value)
{
- struct cyclades_card *card;
- void __iomem *base_addr;
- int channel, chip, index;
+ struct cyclades_card *card = info->card;
unsigned long flags;
- card = info->card;
- channel = info->line - card->first_line;
if (!cy_is_Z(card)) {
- chip = channel >> 2;
- channel &= 0x03;
- index = card->bus_index;
- base_addr =
- card->base_addr + (cy_chip_offset[chip] << index);
-
info->cor3 &= ~CyREC_FIFO;
info->cor3 |= value & CyREC_FIFO;
spin_lock_irqsave(&card->card_lock, flags);
- cy_writeb(base_addr + (CyCOR3 << index), info->cor3);
- cyy_issue_cmd(base_addr, CyCOR_CHANGE | CyCOR3ch, index);
+ cyy_writeb(info, CyCOR3, info->cor3);
+ cyy_issue_cmd(info, CyCOR_CHANGE | CyCOR3ch);
spin_unlock_irqrestore(&card->card_lock, flags);
}
return 0;
@@ -3777,55 +2626,23 @@ static int set_threshold(struct cyclades_port *info, unsigned long value)
static int get_threshold(struct cyclades_port *info,
unsigned long __user *value)
{
- struct cyclades_card *card;
- void __iomem *base_addr;
- int channel, chip, index;
- unsigned long tmp;
+ struct cyclades_card *card = info->card;
- card = info->card;
- channel = info->line - card->first_line;
if (!cy_is_Z(card)) {
- chip = channel >> 2;
- channel &= 0x03;
- index = card->bus_index;
- base_addr = card->base_addr + (cy_chip_offset[chip] << index);
-
- tmp = readb(base_addr + (CyCOR3 << index)) & CyREC_FIFO;
+ u8 tmp = cyy_readb(info, CyCOR3) & CyREC_FIFO;
return put_user(tmp, value);
}
return 0;
} /* get_threshold */
-static int set_default_threshold(struct cyclades_port *info,
- unsigned long value)
-{
- info->default_threshold = value & 0x0f;
- return 0;
-} /* set_default_threshold */
-
-static int get_default_threshold(struct cyclades_port *info,
- unsigned long __user *value)
-{
- return put_user(info->default_threshold, value);
-} /* get_default_threshold */
-
static int set_timeout(struct cyclades_port *info, unsigned long value)
{
- struct cyclades_card *card;
- void __iomem *base_addr;
- int channel, chip, index;
+ struct cyclades_card *card = info->card;
unsigned long flags;
- card = info->card;
- channel = info->line - card->first_line;
if (!cy_is_Z(card)) {
- chip = channel >> 2;
- channel &= 0x03;
- index = card->bus_index;
- base_addr = card->base_addr + (cy_chip_offset[chip] << index);
-
spin_lock_irqsave(&card->card_lock, flags);
- cy_writeb(base_addr + (CyRTPR << index), value & 0xff);
+ cyy_writeb(info, CyRTPR, value & 0xff);
spin_unlock_irqrestore(&card->card_lock, flags);
}
return 0;
@@ -3834,36 +2651,35 @@ static int set_timeout(struct cyclades_port *info, unsigned long value)
static int get_timeout(struct cyclades_port *info,
unsigned long __user *value)
{
- struct cyclades_card *card;
- void __iomem *base_addr;
- int channel, chip, index;
- unsigned long tmp;
+ struct cyclades_card *card = info->card;
- card = info->card;
- channel = info->line - card->first_line;
if (!cy_is_Z(card)) {
- chip = channel >> 2;
- channel &= 0x03;
- index = card->bus_index;
- base_addr = card->base_addr + (cy_chip_offset[chip] << index);
-
- tmp = readb(base_addr + (CyRTPR << index));
+ u8 tmp = cyy_readb(info, CyRTPR);
return put_user(tmp, value);
}
return 0;
} /* get_timeout */
-static int set_default_timeout(struct cyclades_port *info, unsigned long value)
+static int cy_cflags_changed(struct cyclades_port *info, unsigned long arg,
+ struct cyclades_icount *cprev)
{
- info->default_timeout = value & 0xff;
- return 0;
-} /* set_default_timeout */
+ struct cyclades_icount cnow;
+ unsigned long flags;
+ int ret;
-static int get_default_timeout(struct cyclades_port *info,
- unsigned long __user *value)
-{
- return put_user(info->default_timeout, value);
-} /* get_default_timeout */
+ spin_lock_irqsave(&info->card->card_lock, flags);
+ cnow = info->icount; /* atomic copy */
+ spin_unlock_irqrestore(&info->card->card_lock, flags);
+
+ ret = ((arg & TIOCM_RNG) && (cnow.rng != cprev->rng)) ||
+ ((arg & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) ||
+ ((arg & TIOCM_CD) && (cnow.dcd != cprev->dcd)) ||
+ ((arg & TIOCM_CTS) && (cnow.cts != cprev->cts));
+
+ *cprev = cnow;
+
+ return ret;
+}
/*
* This routine allows the tty driver to implement device-
@@ -3875,8 +2691,7 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
struct cyclades_port *info = tty->driver_data;
- struct cyclades_icount cprev, cnow; /* kernel counter temps */
- struct serial_icounter_struct __user *p_cuser; /* user space */
+ struct cyclades_icount cnow; /* kernel counter temps */
int ret_val = 0;
unsigned long flags;
void __user *argp = (void __user *)arg;
@@ -3892,7 +2707,11 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
switch (cmd) {
case CYGETMON:
- ret_val = get_mon_info(info, argp);
+ if (copy_to_user(argp, &info->mon, sizeof(info->mon))) {
+ ret_val = -EFAULT;
+ break;
+ }
+ memset(&info->mon, 0, sizeof(info->mon));
break;
case CYGETTHRESH:
ret_val = get_threshold(info, argp);
@@ -3901,10 +2720,11 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
ret_val = set_threshold(info, arg);
break;
case CYGETDEFTHRESH:
- ret_val = get_default_threshold(info, argp);
+ ret_val = put_user(info->default_threshold,
+ (unsigned long __user *)argp);
break;
case CYSETDEFTHRESH:
- ret_val = set_default_threshold(info, arg);
+ info->default_threshold = arg & 0x0f;
break;
case CYGETTIMEOUT:
ret_val = get_timeout(info, argp);
@@ -3913,21 +2733,20 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
ret_val = set_timeout(info, arg);
break;
case CYGETDEFTIMEOUT:
- ret_val = get_default_timeout(info, argp);
+ ret_val = put_user(info->default_timeout,
+ (unsigned long __user *)argp);
break;
case CYSETDEFTIMEOUT:
- ret_val = set_default_timeout(info, arg);
+ info->default_timeout = arg & 0xff;
break;
case CYSETRFLOW:
info->rflow = (int)arg;
- ret_val = 0;
break;
case CYGETRFLOW:
ret_val = info->rflow;
break;
case CYSETRTSDTR_INV:
info->rtsdtr_inv = (int)arg;
- ret_val = 0;
break;
case CYGETRTSDTR_INV:
ret_val = info->rtsdtr_inv;
@@ -3938,7 +2757,6 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
#ifndef CONFIG_CYZ_INTR
case CYZSETPOLLCYCLE:
cyz_polling_cycle = (arg * HZ) / 1000;
- ret_val = 0;
break;
case CYZGETPOLLCYCLE:
ret_val = (cyz_polling_cycle * 1000) / HZ;
@@ -3946,16 +2764,15 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
#endif /* CONFIG_CYZ_INTR */
case CYSETWAIT:
info->port.closing_wait = (unsigned short)arg * HZ / 100;
- ret_val = 0;
break;
case CYGETWAIT:
ret_val = info->port.closing_wait / (HZ / 100);
break;
case TIOCGSERIAL:
- ret_val = get_serial_info(info, argp);
+ ret_val = cy_get_serial_info(info, argp);
break;
case TIOCSSERIAL:
- ret_val = set_serial_info(info, argp);
+ ret_val = cy_set_serial_info(info, tty, argp);
break;
case TIOCSERGETLSR: /* Get line status register */
ret_val = get_lsr_info(info, argp);
@@ -3971,17 +2788,8 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
/* note the counters on entry */
cnow = info->icount;
spin_unlock_irqrestore(&info->card->card_lock, flags);
- ret_val = wait_event_interruptible(info->delta_msr_wait, ({
- cprev = cnow;
- spin_lock_irqsave(&info->card->card_lock, flags);
- cnow = info->icount; /* atomic copy */
- spin_unlock_irqrestore(&info->card->card_lock, flags);
-
- ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
- ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
- ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
- ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts));
- }));
+ ret_val = wait_event_interruptible(info->port.delta_msr_wait,
+ cy_cflags_changed(info, arg, &cnow));
break;
/*
@@ -3990,46 +2798,29 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
* NB: both 1->0 and 0->1 transitions are counted except for
* RI where only 0->1 is counted.
*/
- case TIOCGICOUNT:
+ case TIOCGICOUNT: {
+ struct serial_icounter_struct sic = { };
+
spin_lock_irqsave(&info->card->card_lock, flags);
cnow = info->icount;
spin_unlock_irqrestore(&info->card->card_lock, flags);
- p_cuser = argp;
- ret_val = put_user(cnow.cts, &p_cuser->cts);
- if (ret_val)
- break;
- ret_val = put_user(cnow.dsr, &p_cuser->dsr);
- if (ret_val)
- break;
- ret_val = put_user(cnow.rng, &p_cuser->rng);
- if (ret_val)
- break;
- ret_val = put_user(cnow.dcd, &p_cuser->dcd);
- if (ret_val)
- break;
- ret_val = put_user(cnow.rx, &p_cuser->rx);
- if (ret_val)
- break;
- ret_val = put_user(cnow.tx, &p_cuser->tx);
- if (ret_val)
- break;
- ret_val = put_user(cnow.frame, &p_cuser->frame);
- if (ret_val)
- break;
- ret_val = put_user(cnow.overrun, &p_cuser->overrun);
- if (ret_val)
- break;
- ret_val = put_user(cnow.parity, &p_cuser->parity);
- if (ret_val)
- break;
- ret_val = put_user(cnow.brk, &p_cuser->brk);
- if (ret_val)
- break;
- ret_val = put_user(cnow.buf_overrun, &p_cuser->buf_overrun);
- if (ret_val)
- break;
- ret_val = 0;
+
+ sic.cts = cnow.cts;
+ sic.dsr = cnow.dsr;
+ sic.rng = cnow.rng;
+ sic.dcd = cnow.dcd;
+ sic.rx = cnow.rx;
+ sic.tx = cnow.tx;
+ sic.frame = cnow.frame;
+ sic.overrun = cnow.overrun;
+ sic.parity = cnow.parity;
+ sic.brk = cnow.brk;
+ sic.buf_overrun = cnow.buf_overrun;
+
+ if (copy_to_user(argp, &sic, sizeof(sic)))
+ ret_val = -EFAULT;
break;
+ }
default:
ret_val = -ENOIOCTLCMD;
}
@@ -4055,7 +2846,7 @@ static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
printk(KERN_DEBUG "cyc:cy_set_termios ttyC%d\n", info->line);
#endif
- set_line_char(info);
+ cy_set_line_char(info, tty);
if ((old_termios->c_cflag & CRTSCTS) &&
!(tty->termios->c_cflag & CRTSCTS)) {
@@ -4112,8 +2903,6 @@ static void cy_throttle(struct tty_struct *tty)
struct cyclades_port *info = tty->driver_data;
struct cyclades_card *card;
unsigned long flags;
- void __iomem *base_addr;
- int chip, channel, index;
#ifdef CY_DEBUG_THROTTLE
char buf[64];
@@ -4135,24 +2924,9 @@ static void cy_throttle(struct tty_struct *tty)
}
if (tty->termios->c_cflag & CRTSCTS) {
- channel = info->line - card->first_line;
if (!cy_is_Z(card)) {
- chip = channel >> 2;
- channel &= 0x03;
- index = card->bus_index;
- base_addr = card->base_addr +
- (cy_chip_offset[chip] << index);
-
spin_lock_irqsave(&card->card_lock, flags);
- cy_writeb(base_addr + (CyCAR << index),
- (u_char) channel);
- if (info->rtsdtr_inv) {
- cy_writeb(base_addr + (CyMSVR2 << index),
- ~CyDTR);
- } else {
- cy_writeb(base_addr + (CyMSVR1 << index),
- ~CyRTS);
- }
+ cyy_change_rts_dtr(info, 0, TIOCM_RTS);
spin_unlock_irqrestore(&card->card_lock, flags);
} else {
info->throttle = 1;
@@ -4170,8 +2944,6 @@ static void cy_unthrottle(struct tty_struct *tty)
struct cyclades_port *info = tty->driver_data;
struct cyclades_card *card;
unsigned long flags;
- void __iomem *base_addr;
- int chip, channel, index;
#ifdef CY_DEBUG_THROTTLE
char buf[64];
@@ -4192,24 +2964,9 @@ static void cy_unthrottle(struct tty_struct *tty)
if (tty->termios->c_cflag & CRTSCTS) {
card = info->card;
- channel = info->line - card->first_line;
if (!cy_is_Z(card)) {
- chip = channel >> 2;
- channel &= 0x03;
- index = card->bus_index;
- base_addr = card->base_addr +
- (cy_chip_offset[chip] << index);
-
spin_lock_irqsave(&card->card_lock, flags);
- cy_writeb(base_addr + (CyCAR << index),
- (u_char) channel);
- if (info->rtsdtr_inv) {
- cy_writeb(base_addr + (CyMSVR2 << index),
- CyDTR);
- } else {
- cy_writeb(base_addr + (CyMSVR1 << index),
- CyRTS);
- }
+ cyy_change_rts_dtr(info, TIOCM_RTS, 0);
spin_unlock_irqrestore(&card->card_lock, flags);
} else {
info->throttle = 0;
@@ -4224,8 +2981,7 @@ static void cy_stop(struct tty_struct *tty)
{
struct cyclades_card *cinfo;
struct cyclades_port *info = tty->driver_data;
- void __iomem *base_addr;
- int chip, channel, index;
+ int channel;
unsigned long flags;
#ifdef CY_DEBUG_OTHER
@@ -4238,16 +2994,9 @@ static void cy_stop(struct tty_struct *tty)
cinfo = info->card;
channel = info->line - cinfo->first_line;
if (!cy_is_Z(cinfo)) {
- index = cinfo->bus_index;
- chip = channel >> 2;
- channel &= 0x03;
- base_addr = cinfo->base_addr + (cy_chip_offset[chip] << index);
-
spin_lock_irqsave(&cinfo->card_lock, flags);
- cy_writeb(base_addr + (CyCAR << index),
- (u_char)(channel & 0x0003)); /* index channel */
- cy_writeb(base_addr + (CySRER << index),
- readb(base_addr + (CySRER << index)) & ~CyTxRdy);
+ cyy_writeb(info, CyCAR, channel & 0x03);
+ cyy_writeb(info, CySRER, cyy_readb(info, CySRER) & ~CyTxRdy);
spin_unlock_irqrestore(&cinfo->card_lock, flags);
}
} /* cy_stop */
@@ -4256,8 +3005,7 @@ static void cy_start(struct tty_struct *tty)
{
struct cyclades_card *cinfo;
struct cyclades_port *info = tty->driver_data;
- void __iomem *base_addr;
- int chip, channel, index;
+ int channel;
unsigned long flags;
#ifdef CY_DEBUG_OTHER
@@ -4269,17 +3017,10 @@ static void cy_start(struct tty_struct *tty)
cinfo = info->card;
channel = info->line - cinfo->first_line;
- index = cinfo->bus_index;
if (!cy_is_Z(cinfo)) {
- chip = channel >> 2;
- channel &= 0x03;
- base_addr = cinfo->base_addr + (cy_chip_offset[chip] << index);
-
spin_lock_irqsave(&cinfo->card_lock, flags);
- cy_writeb(base_addr + (CyCAR << index),
- (u_char) (channel & 0x0003)); /* index channel */
- cy_writeb(base_addr + (CySRER << index),
- readb(base_addr + (CySRER << index)) | CyTxRdy);
+ cyy_writeb(info, CyCAR, channel & 0x03);
+ cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyTxRdy);
spin_unlock_irqrestore(&cinfo->card_lock, flags);
}
} /* cy_start */
@@ -4299,17 +3040,84 @@ static void cy_hangup(struct tty_struct *tty)
return;
cy_flush_buffer(tty);
- shutdown(info);
- info->port.count = 0;
-#ifdef CY_DEBUG_COUNT
- printk(KERN_DEBUG "cyc:cy_hangup (%d): setting count to 0\n",
- current->pid);
-#endif
- info->port.tty = NULL;
- info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
- wake_up_interruptible(&info->port.open_wait);
+ cy_shutdown(info, tty);
+ tty_port_hangup(&info->port);
} /* cy_hangup */
+static int cyy_carrier_raised(struct tty_port *port)
+{
+ struct cyclades_port *info = container_of(port, struct cyclades_port,
+ port);
+ struct cyclades_card *cinfo = info->card;
+ unsigned long flags;
+ int channel = info->line - cinfo->first_line;
+ u32 cd;
+
+ spin_lock_irqsave(&cinfo->card_lock, flags);
+ cyy_writeb(info, CyCAR, channel & 0x03);
+ cd = cyy_readb(info, CyMSVR1) & CyDCD;
+ spin_unlock_irqrestore(&cinfo->card_lock, flags);
+
+ return cd;
+}
+
+static void cyy_dtr_rts(struct tty_port *port, int raise)
+{
+ struct cyclades_port *info = container_of(port, struct cyclades_port,
+ port);
+ struct cyclades_card *cinfo = info->card;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cinfo->card_lock, flags);
+ cyy_change_rts_dtr(info, raise ? TIOCM_RTS | TIOCM_DTR : 0,
+ raise ? 0 : TIOCM_RTS | TIOCM_DTR);
+ spin_unlock_irqrestore(&cinfo->card_lock, flags);
+}
+
+static int cyz_carrier_raised(struct tty_port *port)
+{
+ struct cyclades_port *info = container_of(port, struct cyclades_port,
+ port);
+
+ return readl(&info->u.cyz.ch_ctrl->rs_status) & C_RS_DCD;
+}
+
+static void cyz_dtr_rts(struct tty_port *port, int raise)
+{
+ struct cyclades_port *info = container_of(port, struct cyclades_port,
+ port);
+ struct cyclades_card *cinfo = info->card;
+ struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
+ int ret, channel = info->line - cinfo->first_line;
+ u32 rs;
+
+ rs = readl(&ch_ctrl->rs_control);
+ if (raise)
+ rs |= C_RS_RTS | C_RS_DTR;
+ else
+ rs &= ~(C_RS_RTS | C_RS_DTR);
+ cy_writel(&ch_ctrl->rs_control, rs);
+ ret = cyz_issue_cmd(cinfo, channel, C_CM_IOCTLM, 0L);
+ if (ret != 0)
+ printk(KERN_ERR "%s: retval on ttyC%d was %x\n",
+ __func__, info->line, ret);
+#ifdef CY_DEBUG_DTR
+ printk(KERN_DEBUG "%s: raising Z DTR\n", __func__);
+#endif
+}
+
+static const struct tty_port_operations cyy_port_ops = {
+ .carrier_raised = cyy_carrier_raised,
+ .dtr_rts = cyy_dtr_rts,
+ .shutdown = cy_do_close,
+};
+
+static const struct tty_port_operations cyz_port_ops = {
+ .carrier_raised = cyz_carrier_raised,
+ .dtr_rts = cyz_dtr_rts,
+ .shutdown = cy_do_close,
+};
+
/*
* ---------------------------------------------------------------------
* cy_init() and friends
@@ -4321,8 +3129,7 @@ static void cy_hangup(struct tty_struct *tty)
static int __devinit cy_init_card(struct cyclades_card *cinfo)
{
struct cyclades_port *info;
- unsigned int port;
- unsigned short chip_number;
+ unsigned int channel, port;
spin_lock_init(&cinfo->card_lock);
cinfo->intr_enabled = 0;
@@ -4334,9 +3141,9 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo)
return -ENOMEM;
}
- for (port = cinfo->first_line; port < cinfo->first_line + cinfo->nports;
- port++) {
- info = &cinfo->ports[port - cinfo->first_line];
+ for (channel = 0, port = cinfo->first_line; channel < cinfo->nports;
+ channel++, port++) {
+ info = &cinfo->ports[channel];
tty_port_init(&info->port);
info->magic = CYCLADES_MAGIC;
info->card = cinfo;
@@ -4346,10 +3153,19 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo)
info->port.close_delay = 5 * HZ / 10;
info->port.flags = STD_COM_FLAGS;
init_completion(&info->shutdown_wait);
- init_waitqueue_head(&info->delta_msr_wait);
if (cy_is_Z(cinfo)) {
+ struct FIRM_ID *firm_id = cinfo->base_addr + ID_ADDRESS;
+ struct ZFW_CTRL *zfw_ctrl;
+
+ info->port.ops = &cyz_port_ops;
info->type = PORT_STARTECH;
+
+ zfw_ctrl = cinfo->base_addr +
+ (readl(&firm_id->zfwctrl_addr) & 0xfffff);
+ info->u.cyz.ch_ctrl = &zfw_ctrl->ch_ctrl[channel];
+ info->u.cyz.buf_ctrl = &zfw_ctrl->buf_ctrl[channel];
+
if (cinfo->hw_ver == ZO_V1)
info->xmit_fifo_size = CYZ_FIFO_SIZE;
else
@@ -4359,17 +3175,20 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo)
cyz_rx_restart, (unsigned long)info);
#endif
} else {
+ unsigned short chip_number;
int index = cinfo->bus_index;
+
+ info->port.ops = &cyy_port_ops;
info->type = PORT_CIRRUS;
info->xmit_fifo_size = CyMAX_CHAR_FIFO;
info->cor1 = CyPARITY_NONE | Cy_1_STOP | Cy_8_BITS;
info->cor2 = CyETC;
info->cor3 = 0x08; /* _very_ small rcv threshold */
- chip_number = (port - cinfo->first_line) / 4;
- info->chip_rev = readb(cinfo->base_addr +
- (cy_chip_offset[chip_number] << index) +
- (CyGFRCR << index));
+ chip_number = channel / CyPORTS_PER_CHIP;
+ info->u.cyy.base_addr = cinfo->base_addr +
+ (cy_chip_offset[chip_number] << index);
+ info->chip_rev = cyy_readb(info, CyGFRCR);
if (info->chip_rev >= CD1400_REV_J) {
/* It is a CD1400 rev. J or later */
@@ -5060,8 +3879,14 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
}
cy_card[card_no].num_chips = nchan / CyPORTS_PER_CHIP;
} else {
+ struct FIRM_ID __iomem *firm_id = addr2 + ID_ADDRESS;
+ struct ZFW_CTRL __iomem *zfw_ctrl;
+
+ zfw_ctrl = addr2 + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
+
cy_card[card_no].hw_ver = mailbox;
cy_card[card_no].num_chips = (unsigned int)-1;
+ cy_card[card_no].board_ctrl = &zfw_ctrl->board_ctrl;
#ifdef CONFIG_CYZ_INTR
/* allocate IRQ only if board has an IRQ */
if (irq != 0 && irq != 255) {
@@ -5191,18 +4016,30 @@ static int cyclades_proc_show(struct seq_file *m, void *v)
for (j = 0; j < cy_card[i].nports; j++) {
info = &cy_card[i].ports[j];
- if (info->port.count)
+ if (info->port.count) {
+ /* XXX is the ldisc num worth this? */
+ struct tty_struct *tty;
+ struct tty_ldisc *ld;
+ int num = 0;
+ tty = tty_port_tty_get(&info->port);
+ if (tty) {
+ ld = tty_ldisc_ref(tty);
+ if (ld) {
+ num = ld->ops->num;
+ tty_ldisc_deref(ld);
+ }
+ tty_kref_put(tty);
+ }
seq_printf(m, "%3d %8lu %10lu %8lu "
- "%10lu %8lu %9lu %6ld\n", info->line,
+ "%10lu %8lu %9lu %6d\n", info->line,
(cur_jifs - info->idle_stats.in_use) /
HZ, info->idle_stats.xmit_bytes,
(cur_jifs - info->idle_stats.xmit_idle)/
HZ, info->idle_stats.recv_bytes,
(cur_jifs - info->idle_stats.recv_idle)/
HZ, info->idle_stats.overruns,
- /* FIXME: double check locking */
- (long)info->port.tty->ldisc->ops->num);
- else
+ num);
+ } else
seq_printf(m, "%3d %8lu %10lu %8lu "
"%10lu %8lu %9lu %6ld\n",
info->line, 0L, 0L, 0L, 0L, 0L, 0L, 0L);
diff --git a/drivers/char/esp.c b/drivers/char/esp.c
index a5c59fc2b0f..b19d43cd954 100644
--- a/drivers/char/esp.c
+++ b/drivers/char/esp.c
@@ -572,7 +572,7 @@ static void check_modem_status(struct esp_struct *info)
info->icount.dcd++;
if (status & UART_MSR_DCTS)
info->icount.cts++;
- wake_up_interruptible(&info->delta_msr_wait);
+ wake_up_interruptible(&info->port.delta_msr_wait);
}
if ((info->port.flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
@@ -927,7 +927,7 @@ static void shutdown(struct esp_struct *info)
* clear delta_msr_wait queue to avoid mem leaks: we may free the irq
* here so the queue might never be waken up
*/
- wake_up_interruptible(&info->delta_msr_wait);
+ wake_up_interruptible(&info->port.delta_msr_wait);
wake_up_interruptible(&info->break_wait);
/* stop a DMA transfer on the port being closed */
@@ -1800,7 +1800,7 @@ static int rs_ioctl(struct tty_struct *tty, struct file *file,
spin_unlock_irqrestore(&info->lock, flags);
while (1) {
/* FIXME: convert to new style wakeup */
- interruptible_sleep_on(&info->delta_msr_wait);
+ interruptible_sleep_on(&info->port.delta_msr_wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
@@ -2452,7 +2452,6 @@ static int __init espserial_init(void)
info->config.flow_off = flow_off;
info->config.pio_threshold = pio_threshold;
info->next_port = ports;
- init_waitqueue_head(&info->delta_msr_wait);
init_waitqueue_head(&info->break_wait);
ports = info;
printk(KERN_INFO "ttyP%d at 0x%04x (irq = %d) is an ESP ",
diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c
index 4f1f4cd670d..426bfdd7f3e 100644
--- a/drivers/char/isicom.c
+++ b/drivers/char/isicom.c
@@ -846,37 +846,53 @@ static int isicom_carrier_raised(struct tty_port *port)
return (ip->status & ISI_DCD)?1 : 0;
}
-static int isicom_open(struct tty_struct *tty, struct file *filp)
+static struct tty_port *isicom_find_port(struct tty_struct *tty)
{
struct isi_port *port;
struct isi_board *card;
unsigned int board;
- int error, line;
+ int line = tty->index;
- line = tty->index;
if (line < 0 || line > PORT_COUNT-1)
- return -ENODEV;
+ return NULL;
board = BOARD(line);
card = &isi_card[board];
if (!(card->status & FIRMWARE_LOADED))
- return -ENODEV;
+ return NULL;
/* open on a port greater than the port count for the card !!! */
if (line > ((board * 16) + card->port_count - 1))
- return -ENODEV;
+ return NULL;
port = &isi_ports[line];
if (isicom_paranoia_check(port, tty->name, "isicom_open"))
- return -ENODEV;
+ return NULL;
+ return &port->port;
+}
+
+static int isicom_open(struct tty_struct *tty, struct file *filp)
+{
+ struct isi_port *port;
+ struct isi_board *card;
+ struct tty_port *tport;
+ int error = 0;
+
+ tport = isicom_find_port(tty);
+ if (tport == NULL)
+ return -ENODEV;
+ port = container_of(tport, struct isi_port, port);
+ card = &isi_card[BOARD(tty->index)];
isicom_setup_board(card);
/* FIXME: locking on port.count etc */
port->port.count++;
tty->driver_data = port;
tty_port_tty_set(&port->port, tty);
- error = isicom_setup_port(tty);
+ /* FIXME: Locking on Initialized flag */
+ if (!test_bit(ASYNCB_INITIALIZED, &tport->flags))
+ error = isicom_setup_port(tty);
if (error == 0)
error = tty_port_block_til_ready(&port->port, tty, filp);
return error;
@@ -952,19 +968,12 @@ static void isicom_flush_buffer(struct tty_struct *tty)
tty_wakeup(tty);
}
-static void isicom_close(struct tty_struct *tty, struct file *filp)
+static void isicom_close_port(struct tty_port *port)
{
- struct isi_port *ip = tty->driver_data;
- struct tty_port *port = &ip->port;
- struct isi_board *card;
+ struct isi_port *ip = container_of(port, struct isi_port, port);
+ struct isi_board *card = ip->card;
unsigned long flags;
- BUG_ON(!ip);
-
- card = ip->card;
- if (isicom_paranoia_check(ip, tty->name, "isicom_close"))
- return;
-
/* indicate to the card that no more data can be received
on this port */
spin_lock_irqsave(&card->card_lock, flags);
@@ -974,9 +983,19 @@ static void isicom_close(struct tty_struct *tty, struct file *filp)
}
isicom_shutdown_port(ip);
spin_unlock_irqrestore(&card->card_lock, flags);
+}
+
+static void isicom_close(struct tty_struct *tty, struct file *filp)
+{
+ struct isi_port *ip = tty->driver_data;
+ struct tty_port *port = &ip->port;
+ if (isicom_paranoia_check(ip, tty->name, "isicom_close"))
+ return;
+ if (tty_port_close_start(port, tty, filp) == 0)
+ return;
+ isicom_close_port(port);
isicom_flush_buffer(tty);
-
tty_port_close_end(port, tty);
}
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index dbf8d52f31d..5e28d39b9e8 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -48,7 +48,7 @@
#include "mxser.h"
-#define MXSER_VERSION "2.0.4" /* 1.12 */
+#define MXSER_VERSION "2.0.5" /* 1.14 */
#define MXSERMAJOR 174
#define MXSER_BOARDS 4 /* Max. boards */
@@ -69,6 +69,7 @@
#define PCI_DEVICE_ID_POS104UL 0x1044
#define PCI_DEVICE_ID_CB108 0x1080
#define PCI_DEVICE_ID_CP102UF 0x1023
+#define PCI_DEVICE_ID_CP112UL 0x1120
#define PCI_DEVICE_ID_CB114 0x1142
#define PCI_DEVICE_ID_CP114UL 0x1143
#define PCI_DEVICE_ID_CB134I 0x1341
@@ -139,7 +140,8 @@ static const struct mxser_cardinfo mxser_cards[] = {
{ "CP-138U series", 8, },
{ "POS-104UL series", 4, },
{ "CP-114UL series", 4, },
-/*30*/ { "CP-102UF series", 2, }
+/*30*/ { "CP-102UF series", 2, },
+ { "CP-112UL series", 2, },
};
/* driver_data correspond to the lines in the structure above
@@ -170,6 +172,7 @@ static struct pci_device_id mxser_pcibrds[] = {
{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_POS104UL), .driver_data = 28 },
{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP114UL), .driver_data = 29 },
{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP102UF), .driver_data = 30 },
+ { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP112UL), .driver_data = 31 },
{ }
};
MODULE_DEVICE_TABLE(pci, mxser_pcibrds);
@@ -258,7 +261,6 @@ struct mxser_port {
struct mxser_mon mon_data;
spinlock_t slock;
- wait_queue_head_t delta_msr_wait;
};
struct mxser_board {
@@ -818,7 +820,7 @@ static void mxser_check_modem_status(struct tty_struct *tty,
if (status & UART_MSR_DCTS)
port->icount.cts++;
port->mon_data.modem_status = status;
- wake_up_interruptible(&port->delta_msr_wait);
+ wake_up_interruptible(&port->port.delta_msr_wait);
if ((port->port.flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
if (status & UART_MSR_DCD)
@@ -973,7 +975,7 @@ static void mxser_shutdown(struct tty_struct *tty)
* clear delta_msr_wait queue to avoid mem leaks: we may free the irq
* here so the queue might never be waken up
*/
- wake_up_interruptible(&info->delta_msr_wait);
+ wake_up_interruptible(&info->port.delta_msr_wait);
/*
* Free the IRQ, if necessary
@@ -1073,34 +1075,17 @@ static void mxser_flush_buffer(struct tty_struct *tty)
}
-/*
- * This routine is called when the serial port gets closed. First, we
- * wait for the last remaining data to be sent. Then, we unlink its
- * async structure from the interrupt chain if necessary, and we free
- * that IRQ if nothing is left in the chain.
- */
-static void mxser_close(struct tty_struct *tty, struct file *filp)
+static void mxser_close_port(struct tty_struct *tty, struct tty_port *port)
{
- struct mxser_port *info = tty->driver_data;
- struct tty_port *port = &info->port;
-
+ struct mxser_port *info = container_of(port, struct mxser_port, port);
unsigned long timeout;
-
- if (tty->index == MXSER_PORTS)
- return;
- if (!info)
- return;
-
- if (tty_port_close_start(port, tty, filp) == 0)
- return;
-
/*
* Save the termios structure, since this port may have
* separate termios for callout and dialin.
*
* FIXME: Can this go ?
*/
- if (info->port.flags & ASYNC_NORMAL_ACTIVE)
+ if (port->flags & ASYNC_NORMAL_ACTIVE)
info->normal_termios = *tty->termios;
/*
* At this point we stop accepting input. To do this, we
@@ -1112,7 +1097,7 @@ static void mxser_close(struct tty_struct *tty, struct file *filp)
if (info->board->chip_flag)
info->IER &= ~MOXA_MUST_RECV_ISR;
- if (info->port.flags & ASYNC_INITIALIZED) {
+ if (port->flags & ASYNC_INITIALIZED) {
outb(info->IER, info->ioaddr + UART_IER);
/*
* Before we drop DTR, make sure the UART transmitter
@@ -1127,8 +1112,26 @@ static void mxser_close(struct tty_struct *tty, struct file *filp)
}
}
mxser_shutdown(tty);
- mxser_flush_buffer(tty);
+}
+
+/*
+ * This routine is called when the serial port gets closed. First, we
+ * wait for the last remaining data to be sent. Then, we unlink its
+ * async structure from the interrupt chain if necessary, and we free
+ * that IRQ if nothing is left in the chain.
+ */
+static void mxser_close(struct tty_struct *tty, struct file *filp)
+{
+ struct mxser_port *info = tty->driver_data;
+ struct tty_port *port = &info->port;
+
+ if (tty->index == MXSER_PORTS)
+ return;
+ if (tty_port_close_start(port, tty, filp) == 0)
+ return;
+ mxser_close_port(tty, port);
+ mxser_flush_buffer(tty);
/* Right now the tty_port set is done outside of the close_end helper
as we don't yet have everyone using refcounts */
tty_port_close_end(port, tty);
@@ -1761,7 +1764,7 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
cnow = info->icount; /* note the counters on entry */
spin_unlock_irqrestore(&info->slock, flags);
- return wait_event_interruptible(info->delta_msr_wait,
+ return wait_event_interruptible(info->port.delta_msr_wait,
mxser_cflags_changed(info, arg, &cnow));
/*
* Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
@@ -1803,7 +1806,7 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
lock_kernel();
len = mxser_chars_in_buffer(tty);
- lsr = inb(info->ioaddr + UART_LSR) & UART_LSR_TEMT;
+ lsr = inb(info->ioaddr + UART_LSR) & UART_LSR_THRE;
len += (lsr ? 0 : 1);
unlock_kernel();
@@ -2413,7 +2416,6 @@ static int __devinit mxser_initbrd(struct mxser_board *brd,
info->port.close_delay = 5 * HZ / 10;
info->port.closing_wait = 30 * HZ;
info->normal_termios = mxvar_sdriver->init_termios;
- init_waitqueue_head(&info->delta_msr_wait);
memset(&info->mon_data, 0, sizeof(struct mxser_mon));
info->err_shadow = 0;
spin_lock_init(&info->slock);
diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c
index 4e28b35024e..2e50f4dfc79 100644
--- a/drivers/char/n_tty.c
+++ b/drivers/char/n_tty.c
@@ -272,7 +272,8 @@ static inline int is_continuation(unsigned char c, struct tty_struct *tty)
*
* This is a helper function that handles one output character
* (including special characters like TAB, CR, LF, etc.),
- * putting the results in the tty driver's write buffer.
+ * doing OPOST processing and putting the results in the
+ * tty driver's write buffer.
*
* Note that Linux currently ignores TABDLY, CRDLY, VTDLY, FFDLY
* and NLDLY. They simply aren't relevant in the world today.
@@ -350,8 +351,9 @@ static int do_output_char(unsigned char c, struct tty_struct *tty, int space)
* @c: character (or partial unicode symbol)
* @tty: terminal device
*
- * Perform OPOST processing. Returns -1 when the output device is
- * full and the character must be retried.
+ * Output one character with OPOST processing.
+ * Returns -1 when the output device is full and the character
+ * must be retried.
*
* Locking: output_lock to protect column state and space left
* (also, this is called from n_tty_write under the
@@ -377,8 +379,11 @@ static int process_output(unsigned char c, struct tty_struct *tty)
/**
* process_output_block - block post processor
* @tty: terminal device
- * @inbuf: user buffer
- * @nr: number of bytes
+ * @buf: character buffer
+ * @nr: number of bytes to output
+ *
+ * Output a block of characters with OPOST processing.
+ * Returns the number of characters output.
*
* This path is used to speed up block console writes, among other
* things when processing blocks of output data. It handles only
@@ -571,33 +576,23 @@ static void process_echoes(struct tty_struct *tty)
break;
default:
- if (iscntrl(op)) {
- if (L_ECHOCTL(tty)) {
- /*
- * Ensure there is enough space
- * for the whole ctrl pair.
- */
- if (space < 2) {
- no_space_left = 1;
- break;
- }
- tty_put_char(tty, '^');
- tty_put_char(tty, op ^ 0100);
- tty->column += 2;
- space -= 2;
- } else {
- if (!space) {
- no_space_left = 1;
- break;
- }
- tty_put_char(tty, op);
- space--;
- }
- }
/*
- * If above falls through, this was an
- * undefined op.
+ * If the op is not a special byte code,
+ * it is a ctrl char tagged to be echoed
+ * as "^X" (where X is the letter
+ * representing the control char).
+ * Note that we must ensure there is
+ * enough space for the whole ctrl pair.
+ *
*/
+ if (space < 2) {
+ no_space_left = 1;
+ break;
+ }
+ tty_put_char(tty, '^');
+ tty_put_char(tty, op ^ 0100);
+ tty->column += 2;
+ space -= 2;
cp += 2;
nr -= 2;
}
@@ -605,12 +600,18 @@ static void process_echoes(struct tty_struct *tty)
if (no_space_left)
break;
} else {
- int retval;
-
- retval = do_output_char(c, tty, space);
- if (retval < 0)
- break;
- space -= retval;
+ if (O_OPOST(tty) &&
+ !(test_bit(TTY_HW_COOK_OUT, &tty->flags))) {
+ int retval = do_output_char(c, tty, space);
+ if (retval < 0)
+ break;
+ space -= retval;
+ } else {
+ if (!space)
+ break;
+ tty_put_char(tty, c);
+ space -= 1;
+ }
cp += 1;
nr -= 1;
}
@@ -798,8 +799,8 @@ static void echo_char_raw(unsigned char c, struct tty_struct *tty)
* Echo user input back onto the screen. This must be called only when
* L_ECHO(tty) is true. Called from the driver receive_buf path.
*
- * This variant tags control characters to be possibly echoed as
- * as "^X" (where X is the letter representing the control char).
+ * This variant tags control characters to be echoed as "^X"
+ * (where X is the letter representing the control char).
*
* Locking: echo_lock to protect the echo buffer
*/
@@ -812,7 +813,7 @@ static void echo_char(unsigned char c, struct tty_struct *tty)
add_echo_byte(ECHO_OP_START, tty);
add_echo_byte(ECHO_OP_START, tty);
} else {
- if (iscntrl(c) && c != '\t')
+ if (L_ECHOCTL(tty) && iscntrl(c) && c != '\t')
add_echo_byte(ECHO_OP_START, tty);
add_echo_byte(c, tty);
}
diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c
index 171711acf5c..3cfa22d469e 100644
--- a/drivers/char/riscom8.c
+++ b/drivers/char/riscom8.c
@@ -343,7 +343,7 @@ static void rc_receive_exc(struct riscom_board const *bp)
if (port == NULL)
return;
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
#ifdef RC_REPORT_OVERRUN
status = rc_in(bp, CD180_RCSR);
@@ -355,18 +355,18 @@ static void rc_receive_exc(struct riscom_board const *bp)
#endif
ch = rc_in(bp, CD180_RDR);
if (!status)
- return;
+ goto out;
if (status & RCSR_TOUT) {
printk(KERN_WARNING "rc%d: port %d: Receiver timeout. "
"Hardware problems ?\n",
board_No(bp), port_No(port));
- return;
+ goto out;
} else if (status & RCSR_BREAK) {
printk(KERN_INFO "rc%d: port %d: Handling break...\n",
board_No(bp), port_No(port));
flag = TTY_BREAK;
- if (port->port.flags & ASYNC_SAK)
+ if (tty && (port->port.flags & ASYNC_SAK))
do_SAK(tty);
} else if (status & RCSR_PE)
@@ -380,8 +380,12 @@ static void rc_receive_exc(struct riscom_board const *bp)
else
flag = TTY_NORMAL;
- tty_insert_flip_char(tty, ch, flag);
- tty_flip_buffer_push(tty);
+ if (tty) {
+ tty_insert_flip_char(tty, ch, flag);
+ tty_flip_buffer_push(tty);
+ }
+out:
+ tty_kref_put(tty);
}
static void rc_receive(struct riscom_board const *bp)
@@ -394,7 +398,7 @@ static void rc_receive(struct riscom_board const *bp)
if (port == NULL)
return;
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
count = rc_in(bp, CD180_RDCR);
@@ -403,15 +407,14 @@ static void rc_receive(struct riscom_board const *bp)
#endif
while (count--) {
- if (tty_buffer_request_room(tty, 1) == 0) {
- printk(KERN_WARNING "rc%d: port %d: Working around "
- "flip buffer overflow.\n",
- board_No(bp), port_No(port));
- break;
- }
- tty_insert_flip_char(tty, rc_in(bp, CD180_RDR), TTY_NORMAL);
+ u8 ch = rc_in(bp, CD180_RDR);
+ if (tty)
+ tty_insert_flip_char(tty, ch, TTY_NORMAL);
+ }
+ if (tty) {
+ tty_flip_buffer_push(tty);
+ tty_kref_put(tty);
}
- tty_flip_buffer_push(tty);
}
static void rc_transmit(struct riscom_board const *bp)
@@ -424,22 +427,22 @@ static void rc_transmit(struct riscom_board const *bp)
if (port == NULL)
return;
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (port->IER & IER_TXEMPTY) {
/* FIFO drained */
rc_out(bp, CD180_CAR, port_No(port));
port->IER &= ~IER_TXEMPTY;
rc_out(bp, CD180_IER, port->IER);
- return;
+ goto out;
}
if ((port->xmit_cnt <= 0 && !port->break_length)
- || tty->stopped || tty->hw_stopped) {
+ || (tty && (tty->stopped || tty->hw_stopped))) {
rc_out(bp, CD180_CAR, port_No(port));
port->IER &= ~IER_TXRDY;
rc_out(bp, CD180_IER, port->IER);
- return;
+ goto out;
}
if (port->break_length) {
@@ -464,7 +467,7 @@ static void rc_transmit(struct riscom_board const *bp)
rc_out(bp, CD180_CCR, CCR_CORCHG2);
port->break_length = 0;
}
- return;
+ goto out;
}
count = CD180_NFIFO;
@@ -480,8 +483,10 @@ static void rc_transmit(struct riscom_board const *bp)
port->IER &= ~IER_TXRDY;
rc_out(bp, CD180_IER, port->IER);
}
- if (port->xmit_cnt <= port->wakeup_chars)
+ if (tty && port->xmit_cnt <= port->wakeup_chars)
tty_wakeup(tty);
+out:
+ tty_kref_put(tty);
}
static void rc_check_modem(struct riscom_board const *bp)
@@ -494,37 +499,43 @@ static void rc_check_modem(struct riscom_board const *bp)
if (port == NULL)
return;
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
mcr = rc_in(bp, CD180_MCR);
if (mcr & MCR_CDCHG) {
if (rc_in(bp, CD180_MSVR) & MSVR_CD)
wake_up_interruptible(&port->port.open_wait);
- else
+ else if (tty)
tty_hangup(tty);
}
#ifdef RISCOM_BRAIN_DAMAGED_CTS
if (mcr & MCR_CTSCHG) {
if (rc_in(bp, CD180_MSVR) & MSVR_CTS) {
- tty->hw_stopped = 0;
port->IER |= IER_TXRDY;
- if (port->xmit_cnt <= port->wakeup_chars)
- tty_wakeup(tty);
+ if (tty) {
+ tty->hw_stopped = 0;
+ if (port->xmit_cnt <= port->wakeup_chars)
+ tty_wakeup(tty);
+ }
} else {
- tty->hw_stopped = 1;
+ if (tty)
+ tty->hw_stopped = 1;
port->IER &= ~IER_TXRDY;
}
rc_out(bp, CD180_IER, port->IER);
}
if (mcr & MCR_DSRCHG) {
if (rc_in(bp, CD180_MSVR) & MSVR_DSR) {
- tty->hw_stopped = 0;
port->IER |= IER_TXRDY;
- if (port->xmit_cnt <= port->wakeup_chars)
- tty_wakeup(tty);
+ if (tty) {
+ tty->hw_stopped = 0;
+ if (port->xmit_cnt <= port->wakeup_chars)
+ tty_wakeup(tty);
+ }
} else {
- tty->hw_stopped = 1;
+ if (tty)
+ tty->hw_stopped = 1;
port->IER &= ~IER_TXRDY;
}
rc_out(bp, CD180_IER, port->IER);
@@ -533,6 +544,7 @@ static void rc_check_modem(struct riscom_board const *bp)
/* Clear change bits */
rc_out(bp, CD180_MCR, 0);
+ tty_kref_put(tty);
}
/* The main interrupt processing routine */
@@ -632,9 +644,9 @@ static void rc_shutdown_board(struct riscom_board *bp)
* Setting up port characteristics.
* Must be called with disabled interrupts
*/
-static void rc_change_speed(struct riscom_board *bp, struct riscom_port *port)
+static void rc_change_speed(struct tty_struct *tty, struct riscom_board *bp,
+ struct riscom_port *port)
{
- struct tty_struct *tty = port->port.tty;
unsigned long baud;
long tmp;
unsigned char cor1 = 0, cor3 = 0;
@@ -781,7 +793,8 @@ static void rc_change_speed(struct riscom_board *bp, struct riscom_port *port)
}
/* Must be called with interrupts enabled */
-static int rc_setup_port(struct riscom_board *bp, struct riscom_port *port)
+static int rc_setup_port(struct tty_struct *tty, struct riscom_board *bp,
+ struct riscom_port *port)
{
unsigned long flags;
@@ -793,11 +806,11 @@ static int rc_setup_port(struct riscom_board *bp, struct riscom_port *port)
spin_lock_irqsave(&riscom_lock, flags);
- clear_bit(TTY_IO_ERROR, &port->port.tty->flags);
+ clear_bit(TTY_IO_ERROR, &tty->flags);
if (port->port.count == 1)
bp->count++;
port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
- rc_change_speed(bp, port);
+ rc_change_speed(tty, bp, port);
port->port.flags |= ASYNC_INITIALIZED;
spin_unlock_irqrestore(&riscom_lock, flags);
@@ -898,9 +911,9 @@ static int rc_open(struct tty_struct *tty, struct file *filp)
port->port.count++;
tty->driver_data = port;
- port->port.tty = tty;
+ tty_port_tty_set(&port->port, tty);
- error = rc_setup_port(bp, port);
+ error = rc_setup_port(tty, bp, port);
if (error == 0)
error = tty_port_block_til_ready(&port->port, tty, filp);
return error;
@@ -921,20 +934,12 @@ static void rc_flush_buffer(struct tty_struct *tty)
tty_wakeup(tty);
}
-static void rc_close(struct tty_struct *tty, struct file *filp)
+static void rc_close_port(struct tty_port *port)
{
- struct riscom_port *port = tty->driver_data;
- struct riscom_board *bp;
unsigned long flags;
+ struct riscom_port *rp = container_of(port, struct riscom_port, port);
+ struct riscom_board *bp = port_Board(rp);
unsigned long timeout;
-
- if (!port || rc_paranoia_check(port, tty->name, "close"))
- return;
-
- bp = port_Board(port);
-
- if (tty_port_close_start(&port->port, tty, filp) == 0)
- return;
/*
* At this point we stop accepting input. To do this, we
@@ -944,31 +949,37 @@ static void rc_close(struct tty_struct *tty, struct file *filp)
*/
spin_lock_irqsave(&riscom_lock, flags);
- port->IER &= ~IER_RXD;
- if (port->port.flags & ASYNC_INITIALIZED) {
- port->IER &= ~IER_TXRDY;
- port->IER |= IER_TXEMPTY;
- rc_out(bp, CD180_CAR, port_No(port));
- rc_out(bp, CD180_IER, port->IER);
+ rp->IER &= ~IER_RXD;
+ if (port->flags & ASYNC_INITIALIZED) {
+ rp->IER &= ~IER_TXRDY;
+ rp->IER |= IER_TXEMPTY;
+ rc_out(bp, CD180_CAR, port_No(rp));
+ rc_out(bp, CD180_IER, rp->IER);
/*
* Before we drop DTR, make sure the UART transmitter
* has completely drained; this is especially
* important if there is a transmit FIFO!
*/
timeout = jiffies + HZ;
- while (port->IER & IER_TXEMPTY) {
+ while (rp->IER & IER_TXEMPTY) {
spin_unlock_irqrestore(&riscom_lock, flags);
- msleep_interruptible(jiffies_to_msecs(port->timeout));
+ msleep_interruptible(jiffies_to_msecs(rp->timeout));
spin_lock_irqsave(&riscom_lock, flags);
if (time_after(jiffies, timeout))
break;
}
}
- rc_shutdown_port(tty, bp, port);
- rc_flush_buffer(tty);
+ rc_shutdown_port(port->tty, bp, rp);
spin_unlock_irqrestore(&riscom_lock, flags);
+}
+
+static void rc_close(struct tty_struct *tty, struct file *filp)
+{
+ struct riscom_port *port = tty->driver_data;
- tty_port_close_end(&port->port, tty);
+ if (!port || rc_paranoia_check(port, tty->name, "close"))
+ return;
+ tty_port_close(&port->port, tty, filp);
}
static int rc_write(struct tty_struct *tty,
@@ -1170,7 +1181,7 @@ static int rc_send_break(struct tty_struct *tty, int length)
return 0;
}
-static int rc_set_serial_info(struct riscom_port *port,
+static int rc_set_serial_info(struct tty_struct *tty, struct riscom_port *port,
struct serial_struct __user *newinfo)
{
struct serial_struct tmp;
@@ -1180,17 +1191,6 @@ static int rc_set_serial_info(struct riscom_port *port,
if (copy_from_user(&tmp, newinfo, sizeof(tmp)))
return -EFAULT;
-#if 0
- if ((tmp.irq != bp->irq) ||
- (tmp.port != bp->base) ||
- (tmp.type != PORT_CIRRUS) ||
- (tmp.baud_base != (RC_OSCFREQ + CD180_TPC/2) / CD180_TPC) ||
- (tmp.custom_divisor != 0) ||
- (tmp.xmit_fifo_size != CD180_NFIFO) ||
- (tmp.flags & ~RISCOM_LEGAL_FLAGS))
- return -EINVAL;
-#endif
-
change_speed = ((port->port.flags & ASYNC_SPD_MASK) !=
(tmp.flags & ASYNC_SPD_MASK));
@@ -1212,7 +1212,7 @@ static int rc_set_serial_info(struct riscom_port *port,
unsigned long flags;
spin_lock_irqsave(&riscom_lock, flags);
- rc_change_speed(bp, port);
+ rc_change_speed(tty, bp, port);
spin_unlock_irqrestore(&riscom_lock, flags);
}
return 0;
@@ -1255,7 +1255,7 @@ static int rc_ioctl(struct tty_struct *tty, struct file *filp,
break;
case TIOCSSERIAL:
lock_kernel();
- retval = rc_set_serial_info(port, argp);
+ retval = rc_set_serial_info(tty, port, argp);
unlock_kernel();
break;
default:
@@ -1350,21 +1350,12 @@ static void rc_start(struct tty_struct *tty)
static void rc_hangup(struct tty_struct *tty)
{
struct riscom_port *port = tty->driver_data;
- struct riscom_board *bp;
- unsigned long flags;
if (rc_paranoia_check(port, tty->name, "rc_hangup"))
return;
- bp = port_Board(port);
-
- rc_shutdown_port(tty, bp, port);
- spin_lock_irqsave(&port->port.lock, flags);
- port->port.count = 0;
- port->port.flags &= ~ASYNC_NORMAL_ACTIVE;
- port->port.tty = NULL;
- wake_up_interruptible(&port->port.open_wait);
- spin_unlock_irqrestore(&port->port.lock, flags);
+ rc_shutdown_port(tty, port_Board(port), port);
+ tty_port_hangup(&port->port);
}
static void rc_set_termios(struct tty_struct *tty,
@@ -1377,7 +1368,7 @@ static void rc_set_termios(struct tty_struct *tty,
return;
spin_lock_irqsave(&riscom_lock, flags);
- rc_change_speed(port_Board(port), port);
+ rc_change_speed(tty, port_Board(port), port);
spin_unlock_irqrestore(&riscom_lock, flags);
if ((old_termios->c_cflag & CRTSCTS) &&
@@ -1410,6 +1401,7 @@ static const struct tty_operations riscom_ops = {
static const struct tty_port_operations riscom_port_ops = {
.carrier_raised = carrier_raised,
+ .shutdown = rc_close_port,
};
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index a3afa0c387c..05f443c47bb 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1184,6 +1184,7 @@ int tty_init_termios(struct tty_struct *tty)
tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios);
return 0;
}
+EXPORT_SYMBOL_GPL(tty_init_termios);
/**
* tty_driver_install_tty() - install a tty entry in the driver
@@ -1386,10 +1387,14 @@ EXPORT_SYMBOL(tty_shutdown);
* tty_mutex - sometimes only
* takes the file list lock internally when working on the list
* of ttys that the driver keeps.
+ *
+ * This method gets called from a work queue so that the driver private
+ * shutdown ops can sleep (needed for USB at least)
*/
-static void release_one_tty(struct kref *kref)
+static void release_one_tty(struct work_struct *work)
{
- struct tty_struct *tty = container_of(kref, struct tty_struct, kref);
+ struct tty_struct *tty =
+ container_of(work, struct tty_struct, hangup_work);
struct tty_driver *driver = tty->driver;
if (tty->ops->shutdown)
@@ -1407,6 +1412,15 @@ static void release_one_tty(struct kref *kref)
free_tty_struct(tty);
}
+static void queue_release_one_tty(struct kref *kref)
+{
+ struct tty_struct *tty = container_of(kref, struct tty_struct, kref);
+ /* The hangup queue is now free so we can reuse it rather than
+ waste a chunk of memory for each port */
+ INIT_WORK(&tty->hangup_work, release_one_tty);
+ schedule_work(&tty->hangup_work);
+}
+
/**
* tty_kref_put - release a tty kref
* @tty: tty device
@@ -1418,7 +1432,7 @@ static void release_one_tty(struct kref *kref)
void tty_kref_put(struct tty_struct *tty)
{
if (tty)
- kref_put(&tty->kref, release_one_tty);
+ kref_put(&tty->kref, queue_release_one_tty);
}
EXPORT_SYMBOL(tty_kref_put);
@@ -2085,7 +2099,7 @@ static int tioccons(struct file *file)
* the generic functionality existed. This piece of history is preserved
* in the expected tty API of posix OS's.
*
- * Locking: none, the open fle handle ensures it won't go away.
+ * Locking: none, the open file handle ensures it won't go away.
*/
static int fionbio(struct file *file, int __user *p)
diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c
index ad6ba4ed280..8e67d5c642a 100644
--- a/drivers/char/tty_ioctl.c
+++ b/drivers/char/tty_ioctl.c
@@ -393,9 +393,7 @@ void tty_termios_encode_baud_rate(struct ktermios *termios,
termios->c_cflag |= (BOTHER << IBSHIFT);
#else
if (ifound == -1 || ofound == -1) {
- static int warned;
- if (!warned++)
- printk(KERN_WARNING "tty: Unable to return correct "
+ printk_once(KERN_WARNING "tty: Unable to return correct "
"speed data as your architecture needs updating.\n");
}
#endif
diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c
index e48af9f7921..aafdbaebc16 100644
--- a/drivers/char/tty_ldisc.c
+++ b/drivers/char/tty_ldisc.c
@@ -145,48 +145,33 @@ int tty_unregister_ldisc(int disc)
}
EXPORT_SYMBOL(tty_unregister_ldisc);
-
-/**
- * tty_ldisc_try_get - try and reference an ldisc
- * @disc: ldisc number
- *
- * Attempt to open and lock a line discipline into place. Return
- * the line discipline refcounted or an error.
- */
-
-static struct tty_ldisc *tty_ldisc_try_get(int disc)
+static struct tty_ldisc_ops *get_ldops(int disc)
{
unsigned long flags;
- struct tty_ldisc *ld;
- struct tty_ldisc_ops *ldops;
- int err = -EINVAL;
-
- ld = kmalloc(sizeof(struct tty_ldisc), GFP_KERNEL);
- if (ld == NULL)
- return ERR_PTR(-ENOMEM);
+ struct tty_ldisc_ops *ldops, *ret;
spin_lock_irqsave(&tty_ldisc_lock, flags);
- ld->ops = NULL;
+ ret = ERR_PTR(-EINVAL);
ldops = tty_ldiscs[disc];
- /* Check the entry is defined */
if (ldops) {
- /* If the module is being unloaded we can't use it */
- if (!try_module_get(ldops->owner))
- err = -EAGAIN;
- else {
- /* lock it */
+ ret = ERR_PTR(-EAGAIN);
+ if (try_module_get(ldops->owner)) {
ldops->refcount++;
- ld->ops = ldops;
- atomic_set(&ld->users, 1);
- err = 0;
+ ret = ldops;
}
}
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
- if (err) {
- kfree(ld);
- return ERR_PTR(err);
- }
- return ld;
+ return ret;
+}
+
+static void put_ldops(struct tty_ldisc_ops *ldops)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&tty_ldisc_lock, flags);
+ ldops->refcount--;
+ module_put(ldops->owner);
+ spin_unlock_irqrestore(&tty_ldisc_lock, flags);
}
/**
@@ -205,14 +190,31 @@ static struct tty_ldisc *tty_ldisc_try_get(int disc)
static struct tty_ldisc *tty_ldisc_get(int disc)
{
struct tty_ldisc *ld;
+ struct tty_ldisc_ops *ldops;
if (disc < N_TTY || disc >= NR_LDISCS)
return ERR_PTR(-EINVAL);
- ld = tty_ldisc_try_get(disc);
- if (IS_ERR(ld)) {
+
+ /*
+ * Get the ldisc ops - we may need to request them to be loaded
+ * dynamically and try again.
+ */
+ ldops = get_ldops(disc);
+ if (IS_ERR(ldops)) {
request_module("tty-ldisc-%d", disc);
- ld = tty_ldisc_try_get(disc);
+ ldops = get_ldops(disc);
+ if (IS_ERR(ldops))
+ return ERR_CAST(ldops);
}
+
+ ld = kmalloc(sizeof(struct tty_ldisc), GFP_KERNEL);
+ if (ld == NULL) {
+ put_ldops(ldops);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ ld->ops = ldops;
+ atomic_set(&ld->users, 1);
return ld;
}
@@ -234,13 +236,13 @@ static void tty_ldiscs_seq_stop(struct seq_file *m, void *v)
static int tty_ldiscs_seq_show(struct seq_file *m, void *v)
{
int i = *(loff_t *)v;
- struct tty_ldisc *ld;
+ struct tty_ldisc_ops *ldops;
- ld = tty_ldisc_try_get(i);
- if (IS_ERR(ld))
+ ldops = get_ldops(i);
+ if (IS_ERR(ldops))
return 0;
- seq_printf(m, "%-10s %2d\n", ld->ops->name ? ld->ops->name : "???", i);
- put_ldisc(ld);
+ seq_printf(m, "%-10s %2d\n", ldops->name ? ldops->name : "???", i);
+ put_ldops(ldops);
return 0;
}
diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c
index 9769b1149f7..a4bbb28f10b 100644
--- a/drivers/char/tty_port.c
+++ b/drivers/char/tty_port.c
@@ -23,6 +23,7 @@ void tty_port_init(struct tty_port *port)
memset(port, 0, sizeof(*port));
init_waitqueue_head(&port->open_wait);
init_waitqueue_head(&port->close_wait);
+ init_waitqueue_head(&port->delta_msr_wait);
mutex_init(&port->mutex);
spin_lock_init(&port->lock);
port->close_delay = (50 * HZ) / 100;
@@ -96,6 +97,14 @@ void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty)
}
EXPORT_SYMBOL(tty_port_tty_set);
+static void tty_port_shutdown(struct tty_port *port)
+{
+ if (port->ops->shutdown &&
+ test_and_clear_bit(ASYNCB_INITIALIZED, &port->flags))
+ port->ops->shutdown(port);
+
+}
+
/**
* tty_port_hangup - hangup helper
* @port: tty port
@@ -116,6 +125,8 @@ void tty_port_hangup(struct tty_port *port)
port->tty = NULL;
spin_unlock_irqrestore(&port->lock, flags);
wake_up_interruptible(&port->open_wait);
+ wake_up_interruptible(&port->delta_msr_wait);
+ tty_port_shutdown(port);
}
EXPORT_SYMBOL(tty_port_hangup);
@@ -296,15 +307,17 @@ int tty_port_close_start(struct tty_port *port, struct tty_struct *tty, struct f
if (port->count) {
spin_unlock_irqrestore(&port->lock, flags);
+ if (port->ops->drop)
+ port->ops->drop(port);
return 0;
}
- port->flags |= ASYNC_CLOSING;
+ set_bit(ASYNCB_CLOSING, &port->flags);
tty->closing = 1;
spin_unlock_irqrestore(&port->lock, flags);
/* Don't block on a stalled port, just pull the chain */
if (tty->flow_stopped)
tty_driver_flush_buffer(tty);
- if (port->flags & ASYNC_INITIALIZED &&
+ if (test_bit(ASYNCB_INITIALIZED, &port->flags) &&
port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
tty_wait_until_sent(tty, port->closing_wait);
if (port->drain_delay) {
@@ -318,6 +331,9 @@ int tty_port_close_start(struct tty_port *port, struct tty_struct *tty, struct f
timeout = 2 * HZ;
schedule_timeout_interruptible(timeout);
}
+ /* Don't call port->drop for the last reference. Callers will want
+ to drop the last active reference in ->shutdown() or the tty
+ shutdown path */
return 1;
}
EXPORT_SYMBOL(tty_port_close_start);
@@ -348,3 +364,14 @@ void tty_port_close_end(struct tty_port *port, struct tty_struct *tty)
spin_unlock_irqrestore(&port->lock, flags);
}
EXPORT_SYMBOL(tty_port_close_end);
+
+void tty_port_close(struct tty_port *port, struct tty_struct *tty,
+ struct file *filp)
+{
+ if (tty_port_close_start(port, tty, filp) == 0)
+ return;
+ tty_port_shutdown(port);
+ tty_port_close_end(port, tty);
+ tty_port_tty_set(port, NULL);
+}
+EXPORT_SYMBOL(tty_port_close);
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index 6aa88f50b03..0c80c68cd04 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -252,7 +252,6 @@ static void notify_update(struct vc_data *vc)
struct vt_notifier_param param = { .vc = vc };
atomic_notifier_call_chain(&vt_notifier_list, VT_UPDATE, &param);
}
-
/*
* Low-Level Functions
*/
@@ -935,6 +934,7 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc,
if (CON_IS_VISIBLE(vc))
update_screen(vc);
+ vt_event_post(VT_EVENT_RESIZE, vc->vc_num, vc->vc_num);
return err;
}
@@ -2129,11 +2129,7 @@ static int do_con_write(struct tty_struct *tty, const unsigned char *buf, int co
currcons = vc->vc_num;
if (!vc_cons_allocated(currcons)) {
/* could this happen? */
- static int error = 0;
- if (!error) {
- error = 1;
- printk("con_write: tty %d not allocated\n", currcons+1);
- }
+ printk_once("con_write: tty %d not allocated\n", currcons+1);
release_console_sem();
return 0;
}
@@ -2910,6 +2906,9 @@ static const struct tty_operations con_ops = {
.flush_chars = con_flush_chars,
.chars_in_buffer = con_chars_in_buffer,
.ioctl = vt_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = vt_compat_ioctl,
+#endif
.stop = con_stop,
.start = con_start,
.throttle = con_throttle,
@@ -2955,7 +2954,6 @@ int __init vty_init(const struct file_operations *console_fops)
}
#ifndef VT_SINGLE_DRIVER
-#include <linux/device.h>
static struct class *vtconsole_class;
@@ -3638,6 +3636,7 @@ void do_blank_screen(int entering_gfx)
blank_state = blank_vesa_wait;
mod_timer(&console_timer, jiffies + vesa_off_interval);
}
+ vt_event_post(VT_EVENT_BLANK, vc->vc_num, vc->vc_num);
}
EXPORT_SYMBOL(do_blank_screen);
@@ -3682,6 +3681,7 @@ void do_unblank_screen(int leaving_gfx)
console_blank_hook(0);
set_palette(vc);
set_cursor(vc);
+ vt_event_post(VT_EVENT_UNBLANK, vc->vc_num, vc->vc_num);
}
EXPORT_SYMBOL(do_unblank_screen);
diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
index 95189f288f8..29c651ab0d7 100644
--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -16,6 +16,8 @@
#include <linux/tty.h>
#include <linux/timer.h>
#include <linux/kernel.h>
+#include <linux/compat.h>
+#include <linux/module.h>
#include <linux/kd.h>
#include <linux/vt.h>
#include <linux/string.h>
@@ -62,6 +64,133 @@ extern struct tty_driver *console_driver;
static void complete_change_console(struct vc_data *vc);
/*
+ * User space VT_EVENT handlers
+ */
+
+struct vt_event_wait {
+ struct list_head list;
+ struct vt_event event;
+ int done;
+};
+
+static LIST_HEAD(vt_events);
+static DEFINE_SPINLOCK(vt_event_lock);
+static DECLARE_WAIT_QUEUE_HEAD(vt_event_waitqueue);
+
+/**
+ * vt_event_post
+ * @event: the event that occurred
+ * @old: old console
+ * @new: new console
+ *
+ * Post an VT event to interested VT handlers
+ */
+
+void vt_event_post(unsigned int event, unsigned int old, unsigned int new)
+{
+ struct list_head *pos, *head;
+ unsigned long flags;
+ int wake = 0;
+
+ spin_lock_irqsave(&vt_event_lock, flags);
+ head = &vt_events;
+
+ list_for_each(pos, head) {
+ struct vt_event_wait *ve = list_entry(pos,
+ struct vt_event_wait, list);
+ if (!(ve->event.event & event))
+ continue;
+ ve->event.event = event;
+ /* kernel view is consoles 0..n-1, user space view is
+ console 1..n with 0 meaning current, so we must bias */
+ ve->event.old = old + 1;
+ ve->event.new = new + 1;
+ wake = 1;
+ ve->done = 1;
+ }
+ spin_unlock_irqrestore(&vt_event_lock, flags);
+ if (wake)
+ wake_up_interruptible(&vt_event_waitqueue);
+}
+
+/**
+ * vt_event_wait - wait for an event
+ * @vw: our event
+ *
+ * Waits for an event to occur which completes our vt_event_wait
+ * structure. On return the structure has wv->done set to 1 for success
+ * or 0 if some event such as a signal ended the wait.
+ */
+
+static void vt_event_wait(struct vt_event_wait *vw)
+{
+ unsigned long flags;
+ /* Prepare the event */
+ INIT_LIST_HEAD(&vw->list);
+ vw->done = 0;
+ /* Queue our event */
+ spin_lock_irqsave(&vt_event_lock, flags);
+ list_add(&vw->list, &vt_events);
+ spin_unlock_irqrestore(&vt_event_lock, flags);
+ /* Wait for it to pass */
+ wait_event_interruptible(vt_event_waitqueue, vw->done);
+ /* Dequeue it */
+ spin_lock_irqsave(&vt_event_lock, flags);
+ list_del(&vw->list);
+ spin_unlock_irqrestore(&vt_event_lock, flags);
+}
+
+/**
+ * vt_event_wait_ioctl - event ioctl handler
+ * @arg: argument to ioctl
+ *
+ * Implement the VT_WAITEVENT ioctl using the VT event interface
+ */
+
+static int vt_event_wait_ioctl(struct vt_event __user *event)
+{
+ struct vt_event_wait vw;
+
+ if (copy_from_user(&vw.event, event, sizeof(struct vt_event)))
+ return -EFAULT;
+ /* Highest supported event for now */
+ if (vw.event.event & ~VT_MAX_EVENT)
+ return -EINVAL;
+
+ vt_event_wait(&vw);
+ /* If it occurred report it */
+ if (vw.done) {
+ if (copy_to_user(event, &vw.event, sizeof(struct vt_event)))
+ return -EFAULT;
+ return 0;
+ }
+ return -EINTR;
+}
+
+/**
+ * vt_waitactive - active console wait
+ * @event: event code
+ * @n: new console
+ *
+ * Helper for event waits. Used to implement the legacy
+ * event waiting ioctls in terms of events
+ */
+
+int vt_waitactive(int n)
+{
+ struct vt_event_wait vw;
+ do {
+ if (n == fg_console + 1)
+ break;
+ vw.event.event = VT_EVENT_SWITCH;
+ vt_event_wait(&vw);
+ if (vw.done == 0)
+ return -EINTR;
+ } while (vw.event.new != n);
+ return 0;
+}
+
+/*
* these are the valid i/o ports we're allowed to change. they map all the
* video ports
*/
@@ -360,6 +489,8 @@ do_unimap_ioctl(int cmd, struct unimapdesc __user *user_ud, int perm, struct vc_
return 0;
}
+
+
/*
* We handle the console-specific ioctl's here. We allow the
* capability to modify any console, not just the fg_console.
@@ -842,6 +973,41 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
}
break;
+ case VT_SETACTIVATE:
+ {
+ struct vt_setactivate vsa;
+
+ if (!perm)
+ goto eperm;
+
+ if (copy_from_user(&vsa, (struct vt_setactivate __user *)arg,
+ sizeof(struct vt_setactivate)))
+ return -EFAULT;
+ if (vsa.console == 0 || vsa.console > MAX_NR_CONSOLES)
+ ret = -ENXIO;
+ else {
+ vsa.console--;
+ acquire_console_sem();
+ ret = vc_allocate(vsa.console);
+ if (ret == 0) {
+ struct vc_data *nvc;
+ /* This is safe providing we don't drop the
+ console sem between vc_allocate and
+ finishing referencing nvc */
+ nvc = vc_cons[vsa.console].d;
+ nvc->vt_mode = vsa.mode;
+ nvc->vt_mode.frsig = 0;
+ put_pid(nvc->vt_pid);
+ nvc->vt_pid = get_pid(task_pid(current));
+ }
+ release_console_sem();
+ if (ret)
+ break;
+ /* Commence switch and lock */
+ set_console(arg);
+ }
+ }
+
/*
* wait until the specified VT has been activated
*/
@@ -851,7 +1017,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
if (arg == 0 || arg > MAX_NR_CONSOLES)
ret = -ENXIO;
else
- ret = vt_waitactive(arg - 1);
+ ret = vt_waitactive(arg);
break;
/*
@@ -1159,6 +1325,9 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
ret = put_user(vc->vc_hi_font_mask,
(unsigned short __user *)arg);
break;
+ case VT_WAITEVENT:
+ ret = vt_event_wait_ioctl((struct vt_event __user *)arg);
+ break;
default:
ret = -ENOIOCTLCMD;
}
@@ -1170,54 +1339,6 @@ eperm:
goto out;
}
-/*
- * Sometimes we want to wait until a particular VT has been activated. We
- * do it in a very simple manner. Everybody waits on a single queue and
- * get woken up at once. Those that are satisfied go on with their business,
- * while those not ready go back to sleep. Seems overkill to add a wait
- * to each vt just for this - usually this does nothing!
- */
-static DECLARE_WAIT_QUEUE_HEAD(vt_activate_queue);
-
-/*
- * Sleeps until a vt is activated, or the task is interrupted. Returns
- * 0 if activation, -EINTR if interrupted by a signal handler.
- */
-int vt_waitactive(int vt)
-{
- int retval;
- DECLARE_WAITQUEUE(wait, current);
-
- add_wait_queue(&vt_activate_queue, &wait);
- for (;;) {
- retval = 0;
-
- /*
- * Synchronize with redraw_screen(). By acquiring the console
- * semaphore we make sure that the console switch is completed
- * before we return. If we didn't wait for the semaphore, we
- * could return at a point where fg_console has already been
- * updated, but the console switch hasn't been completed.
- */
- acquire_console_sem();
- set_current_state(TASK_INTERRUPTIBLE);
- if (vt == fg_console) {
- release_console_sem();
- break;
- }
- release_console_sem();
- retval = -ERESTARTNOHAND;
- if (signal_pending(current))
- break;
- schedule();
- }
- remove_wait_queue(&vt_activate_queue, &wait);
- __set_current_state(TASK_RUNNING);
- return retval;
-}
-
-#define vt_wake_waitactive() wake_up(&vt_activate_queue)
-
void reset_vc(struct vc_data *vc)
{
vc->vc_mode = KD_TEXT;
@@ -1256,12 +1377,216 @@ void vc_SAK(struct work_struct *work)
release_console_sem();
}
+#ifdef CONFIG_COMPAT
+
+struct compat_consolefontdesc {
+ unsigned short charcount; /* characters in font (256 or 512) */
+ unsigned short charheight; /* scan lines per character (1-32) */
+ compat_caddr_t chardata; /* font data in expanded form */
+};
+
+static inline int
+compat_fontx_ioctl(int cmd, struct compat_consolefontdesc __user *user_cfd,
+ int perm, struct console_font_op *op)
+{
+ struct compat_consolefontdesc cfdarg;
+ int i;
+
+ if (copy_from_user(&cfdarg, user_cfd, sizeof(struct compat_consolefontdesc)))
+ return -EFAULT;
+
+ switch (cmd) {
+ case PIO_FONTX:
+ if (!perm)
+ return -EPERM;
+ op->op = KD_FONT_OP_SET;
+ op->flags = KD_FONT_FLAG_OLD;
+ op->width = 8;
+ op->height = cfdarg.charheight;
+ op->charcount = cfdarg.charcount;
+ op->data = compat_ptr(cfdarg.chardata);
+ return con_font_op(vc_cons[fg_console].d, op);
+ case GIO_FONTX:
+ op->op = KD_FONT_OP_GET;
+ op->flags = KD_FONT_FLAG_OLD;
+ op->width = 8;
+ op->height = cfdarg.charheight;
+ op->charcount = cfdarg.charcount;
+ op->data = compat_ptr(cfdarg.chardata);
+ i = con_font_op(vc_cons[fg_console].d, op);
+ if (i)
+ return i;
+ cfdarg.charheight = op->height;
+ cfdarg.charcount = op->charcount;
+ if (copy_to_user(user_cfd, &cfdarg, sizeof(struct compat_consolefontdesc)))
+ return -EFAULT;
+ return 0;
+ }
+ return -EINVAL;
+}
+
+struct compat_console_font_op {
+ compat_uint_t op; /* operation code KD_FONT_OP_* */
+ compat_uint_t flags; /* KD_FONT_FLAG_* */
+ compat_uint_t width, height; /* font size */
+ compat_uint_t charcount;
+ compat_caddr_t data; /* font data with height fixed to 32 */
+};
+
+static inline int
+compat_kdfontop_ioctl(struct compat_console_font_op __user *fontop,
+ int perm, struct console_font_op *op, struct vc_data *vc)
+{
+ int i;
+
+ if (copy_from_user(op, fontop, sizeof(struct compat_console_font_op)))
+ return -EFAULT;
+ if (!perm && op->op != KD_FONT_OP_GET)
+ return -EPERM;
+ op->data = compat_ptr(((struct compat_console_font_op *)op)->data);
+ op->flags |= KD_FONT_FLAG_OLD;
+ i = con_font_op(vc, op);
+ if (i)
+ return i;
+ ((struct compat_console_font_op *)op)->data = (unsigned long)op->data;
+ if (copy_to_user(fontop, op, sizeof(struct compat_console_font_op)))
+ return -EFAULT;
+ return 0;
+}
+
+struct compat_unimapdesc {
+ unsigned short entry_ct;
+ compat_caddr_t entries;
+};
+
+static inline int
+compat_unimap_ioctl(unsigned int cmd, struct compat_unimapdesc __user *user_ud,
+ int perm, struct vc_data *vc)
+{
+ struct compat_unimapdesc tmp;
+ struct unipair __user *tmp_entries;
+
+ if (copy_from_user(&tmp, user_ud, sizeof tmp))
+ return -EFAULT;
+ tmp_entries = compat_ptr(tmp.entries);
+ if (tmp_entries)
+ if (!access_ok(VERIFY_WRITE, tmp_entries,
+ tmp.entry_ct*sizeof(struct unipair)))
+ return -EFAULT;
+ switch (cmd) {
+ case PIO_UNIMAP:
+ if (!perm)
+ return -EPERM;
+ return con_set_unimap(vc, tmp.entry_ct, tmp_entries);
+ case GIO_UNIMAP:
+ if (!perm && fg_console != vc->vc_num)
+ return -EPERM;
+ return con_get_unimap(vc, tmp.entry_ct, &(user_ud->entry_ct), tmp_entries);
+ }
+ return 0;
+}
+
+long vt_compat_ioctl(struct tty_struct *tty, struct file * file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct vc_data *vc = tty->driver_data;
+ struct console_font_op op; /* used in multiple places here */
+ struct kbd_struct *kbd;
+ unsigned int console;
+ void __user *up = (void __user *)arg;
+ int perm;
+ int ret = 0;
+
+ console = vc->vc_num;
+
+ lock_kernel();
+
+ if (!vc_cons_allocated(console)) { /* impossible? */
+ ret = -ENOIOCTLCMD;
+ goto out;
+ }
+
+ /*
+ * To have permissions to do most of the vt ioctls, we either have
+ * to be the owner of the tty, or have CAP_SYS_TTY_CONFIG.
+ */
+ perm = 0;
+ if (current->signal->tty == tty || capable(CAP_SYS_TTY_CONFIG))
+ perm = 1;
+
+ kbd = kbd_table + console;
+ switch (cmd) {
+ /*
+ * these need special handlers for incompatible data structures
+ */
+ case PIO_FONTX:
+ case GIO_FONTX:
+ ret = compat_fontx_ioctl(cmd, up, perm, &op);
+ break;
+
+ case KDFONTOP:
+ ret = compat_kdfontop_ioctl(up, perm, &op, vc);
+ break;
+
+ case PIO_UNIMAP:
+ case GIO_UNIMAP:
+ ret = do_unimap_ioctl(cmd, up, perm, vc);
+ break;
+
+ /*
+ * all these treat 'arg' as an integer
+ */
+ case KIOCSOUND:
+ case KDMKTONE:
+#ifdef CONFIG_X86
+ case KDADDIO:
+ case KDDELIO:
+#endif
+ case KDSETMODE:
+ case KDMAPDISP:
+ case KDUNMAPDISP:
+ case KDSKBMODE:
+ case KDSKBMETA:
+ case KDSKBLED:
+ case KDSETLED:
+ case KDSIGACCEPT:
+ case VT_ACTIVATE:
+ case VT_WAITACTIVE:
+ case VT_RELDISP:
+ case VT_DISALLOCATE:
+ case VT_RESIZE:
+ case VT_RESIZEX:
+ goto fallback;
+
+ /*
+ * the rest has a compatible data structure behind arg,
+ * but we have to convert it to a proper 64 bit pointer.
+ */
+ default:
+ arg = (unsigned long)compat_ptr(arg);
+ goto fallback;
+ }
+out:
+ unlock_kernel();
+ return ret;
+
+fallback:
+ unlock_kernel();
+ return vt_ioctl(tty, file, cmd, arg);
+}
+
+
+#endif /* CONFIG_COMPAT */
+
+
/*
- * Performs the back end of a vt switch
+ * Performs the back end of a vt switch. Called under the console
+ * semaphore.
*/
static void complete_change_console(struct vc_data *vc)
{
unsigned char old_vc_mode;
+ int old = fg_console;
last_console = fg_console;
@@ -1325,7 +1650,7 @@ static void complete_change_console(struct vc_data *vc)
/*
* Wake anyone waiting for their VT to activate
*/
- vt_wake_waitactive();
+ vt_event_post(VT_EVENT_SWITCH, old, vc->vc_num);
return;
}
@@ -1398,3 +1723,58 @@ void change_console(struct vc_data *new_vc)
complete_change_console(new_vc);
}
+
+/* Perform a kernel triggered VT switch for suspend/resume */
+
+static int disable_vt_switch;
+
+int vt_move_to_console(unsigned int vt, int alloc)
+{
+ int prev;
+
+ acquire_console_sem();
+ /* Graphics mode - up to X */
+ if (disable_vt_switch) {
+ release_console_sem();
+ return 0;
+ }
+ prev = fg_console;
+
+ if (alloc && vc_allocate(vt)) {
+ /* we can't have a free VC for now. Too bad,
+ * we don't want to mess the screen for now. */
+ release_console_sem();
+ return -ENOSPC;
+ }
+
+ if (set_console(vt)) {
+ /*
+ * We're unable to switch to the SUSPEND_CONSOLE.
+ * Let the calling function know so it can decide
+ * what to do.
+ */
+ release_console_sem();
+ return -EIO;
+ }
+ release_console_sem();
+ if (vt_waitactive(vt + 1)) {
+ pr_debug("Suspend: Can't switch VCs.");
+ return -EINTR;
+ }
+ return prev;
+}
+
+/*
+ * Normally during a suspend, we allocate a new console and switch to it.
+ * When we resume, we switch back to the original console. This switch
+ * can be slow, so on systems where the framebuffer can handle restoration
+ * of video registers anyways, there's little point in doing the console
+ * switch. This function allows you to disable it by passing it '0'.
+ */
+void pm_set_vt_switch(int do_switch)
+{
+ acquire_console_sem();
+ disable_vt_switch = !do_switch;
+ release_console_sem();
+}
+EXPORT_SYMBOL(pm_set_vt_switch);
diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c
index 8ff7e35c706..f33ac27de64 100644
--- a/drivers/isdn/gigaset/interface.c
+++ b/drivers/isdn/gigaset/interface.c
@@ -408,33 +408,28 @@ static int if_write_room(struct tty_struct *tty)
return retval;
}
-/* FIXME: This function does not have error returns */
-
static int if_chars_in_buffer(struct tty_struct *tty)
{
struct cardstate *cs;
- int retval = -ENODEV;
+ int retval = 0;
cs = (struct cardstate *) tty->driver_data;
if (!cs) {
pr_err("%s: no cardstate\n", __func__);
- return -ENODEV;
+ return 0;
}
gig_dbg(DEBUG_IF, "%u: %s()", cs->minor_index, __func__);
- if (mutex_lock_interruptible(&cs->mutex))
- return -ERESTARTSYS; // FIXME -EINTR?
+ mutex_lock(&cs->mutex);
- if (!cs->connected) {
+ if (!cs->connected)
gig_dbg(DEBUG_IF, "not connected");
- retval = -ENODEV;
- } else if (!cs->open_count)
+ else if (!cs->open_count)
dev_warn(cs->dev, "%s: device not opened\n", __func__);
- else if (cs->mstate != MS_LOCKED) {
+ else if (cs->mstate != MS_LOCKED)
dev_warn(cs->dev, "can't write to unlocked device\n");
- retval = -EBUSY;
- } else
+ else
retval = cs->ops->chars_in_buffer(cs);
mutex_unlock(&cs->mutex);
diff --git a/drivers/net/slip.c b/drivers/net/slip.c
index 26f6ee93a06..e17c535a577 100644
--- a/drivers/net/slip.c
+++ b/drivers/net/slip.c
@@ -616,6 +616,14 @@ static void sl_uninit(struct net_device *dev)
sl_free_bufs(sl);
}
+/* Hook the destructor so we can free slip devices at the right point in time */
+static void sl_free_netdev(struct net_device *dev)
+{
+ int i = dev->base_addr;
+ free_netdev(dev);
+ slip_devs[i] = NULL;
+}
+
static const struct net_device_ops sl_netdev_ops = {
.ndo_init = sl_init,
.ndo_uninit = sl_uninit,
@@ -634,7 +642,7 @@ static const struct net_device_ops sl_netdev_ops = {
static void sl_setup(struct net_device *dev)
{
dev->netdev_ops = &sl_netdev_ops;
- dev->destructor = free_netdev;
+ dev->destructor = sl_free_netdev;
dev->hard_header_len = 0;
dev->addr_len = 0;
@@ -712,8 +720,6 @@ static void sl_sync(void)
static struct slip *sl_alloc(dev_t line)
{
int i;
- int sel = -1;
- int score = -1;
struct net_device *dev = NULL;
struct slip *sl;
@@ -724,55 +730,7 @@ static struct slip *sl_alloc(dev_t line)
dev = slip_devs[i];
if (dev == NULL)
break;
-
- sl = netdev_priv(dev);
- if (sl->leased) {
- if (sl->line != line)
- continue;
- if (sl->tty)
- return NULL;
-
- /* Clear ESCAPE & ERROR flags */
- sl->flags &= (1 << SLF_INUSE);
- return sl;
- }
-
- if (sl->tty)
- continue;
-
- if (current->pid == sl->pid) {
- if (sl->line == line && score < 3) {
- sel = i;
- score = 3;
- continue;
- }
- if (score < 2) {
- sel = i;
- score = 2;
- }
- continue;
- }
- if (sl->line == line && score < 1) {
- sel = i;
- score = 1;
- continue;
- }
- if (score < 0) {
- sel = i;
- score = 0;
- }
- }
-
- if (sel >= 0) {
- i = sel;
- dev = slip_devs[i];
- if (score > 1) {
- sl = netdev_priv(dev);
- sl->flags &= (1 << SLF_INUSE);
- return sl;
- }
}
-
/* Sorry, too many, all slots in use */
if (i >= slip_maxdev)
return NULL;
@@ -909,30 +867,13 @@ err_exit:
}
/*
-
- FIXME: 1,2 are fixed 3 was never true anyway.
-
- Let me to blame a bit.
- 1. TTY module calls this funstion on soft interrupt.
- 2. TTY module calls this function WITH MASKED INTERRUPTS!
- 3. TTY module does not notify us about line discipline
- shutdown,
-
- Seems, now it is clean. The solution is to consider netdevice and
- line discipline sides as two independent threads.
-
- By-product (not desired): sl? does not feel hangups and remains open.
- It is supposed, that user level program (dip, diald, slattach...)
- will catch SIGHUP and make the rest of work.
-
- I see no way to make more with current tty code. --ANK
- */
-
-/*
* Close down a SLIP channel.
* This means flushing out any pending queues, and then returning. This
* call is serialized against other ldisc functions.
+ *
+ * We also use this method fo a hangup event
*/
+
static void slip_close(struct tty_struct *tty)
{
struct slip *sl = tty->disc_data;
@@ -951,10 +892,16 @@ static void slip_close(struct tty_struct *tty)
del_timer_sync(&sl->keepalive_timer);
del_timer_sync(&sl->outfill_timer);
#endif
-
- /* Count references from TTY module */
+ /* Flush network side */
+ unregister_netdev(sl->dev);
+ /* This will complete via sl_free_netdev */
}
+static int slip_hangup(struct tty_struct *tty)
+{
+ slip_close(tty);
+ return 0;
+}
/************************************************************************
* STANDARD SLIP ENCAPSULATION *
************************************************************************/
@@ -1311,6 +1258,7 @@ static struct tty_ldisc_ops sl_ldisc = {
.name = "slip",
.open = slip_open,
.close = slip_close,
+ .hangup = slip_hangup,
.ioctl = slip_ioctl,
.receive_buf = slip_receive_buf,
.write_wakeup = slip_write_wakeup,
@@ -1384,6 +1332,8 @@ static void __exit slip_exit(void)
}
} while (busy && time_before(jiffies, timeout));
+ /* FIXME: hangup is async so we should wait when doing this second
+ phase */
for (i = 0; i < slip_maxdev; i++) {
dev = slip_devs[i];
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index cb6d85d7ff4..1e3d19397a5 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -86,7 +86,7 @@ static void serial21285_enable_ms(struct uart_port *port)
static irqreturn_t serial21285_rx_chars(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
- struct tty_struct *tty = port->info->port.tty;
+ struct tty_struct *tty = port->state->port.tty;
unsigned int status, ch, flag, rxs, max_count = 256;
status = *CSR_UARTFLG;
@@ -124,7 +124,7 @@ static irqreturn_t serial21285_rx_chars(int irq, void *dev_id)
static irqreturn_t serial21285_tx_chars(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
- struct circ_buf *xmit = &port->info->xmit;
+ struct circ_buf *xmit = &port->state->xmit;
int count = 256;
if (port->x_char) {
@@ -235,8 +235,8 @@ serial21285_set_termios(struct uart_port *port, struct ktermios *termios,
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
quot = uart_get_divisor(port, baud);
- if (port->info && port->info->port.tty) {
- struct tty_struct *tty = port->info->port.tty;
+ if (port->state && port->state->port.tty) {
+ struct tty_struct *tty = port->state->port.tty;
unsigned int b = port->uartclk / (16 * quot);
tty_encode_baud_rate(tty, b, b);
}
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index fb867a9f55e..2209620d234 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -1382,7 +1382,7 @@ static void serial8250_enable_ms(struct uart_port *port)
static void
receive_chars(struct uart_8250_port *up, unsigned int *status)
{
- struct tty_struct *tty = up->port.info->port.tty;
+ struct tty_struct *tty = up->port.state->port.tty;
unsigned char ch, lsr = *status;
int max_count = 256;
char flag;
@@ -1457,7 +1457,7 @@ ignore_char:
static void transmit_chars(struct uart_8250_port *up)
{
- struct circ_buf *xmit = &up->port.info->xmit;
+ struct circ_buf *xmit = &up->port.state->xmit;
int count;
if (up->port.x_char) {
@@ -1500,7 +1500,7 @@ static unsigned int check_modem_status(struct uart_8250_port *up)
status |= up->msr_saved_flags;
up->msr_saved_flags = 0;
if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI &&
- up->port.info != NULL) {
+ up->port.state != NULL) {
if (status & UART_MSR_TERI)
up->port.icount.rng++;
if (status & UART_MSR_DDSR)
@@ -1510,7 +1510,7 @@ static unsigned int check_modem_status(struct uart_8250_port *up)
if (status & UART_MSR_DCTS)
uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
- wake_up_interruptible(&up->port.info->delta_msr_wait);
+ wake_up_interruptible(&up->port.state->port.delta_msr_wait);
}
return status;
@@ -1677,7 +1677,7 @@ static int serial_link_irq_chain(struct uart_8250_port *up)
INIT_LIST_HEAD(&up->list);
i->head = &up->list;
spin_unlock_irq(&i->lock);
-
+ irq_flags |= up->port.irqflags;
ret = request_irq(up->port.irq, serial8250_interrupt,
irq_flags, "serial", i);
if (ret < 0)
@@ -1764,7 +1764,7 @@ static void serial8250_backup_timeout(unsigned long data)
up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
spin_unlock_irqrestore(&up->port.lock, flags);
if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) &&
- (!uart_circ_empty(&up->port.info->xmit) || up->port.x_char) &&
+ (!uart_circ_empty(&up->port.state->xmit) || up->port.x_char) &&
(lsr & UART_LSR_THRE)) {
iir &= ~(UART_IIR_ID | UART_IIR_NO_INT);
iir |= UART_IIR_THRI;
@@ -2026,7 +2026,7 @@ static int serial8250_startup(struct uart_port *port)
* allow register changes to become visible.
*/
spin_lock_irqsave(&up->port.lock, flags);
- if (up->port.flags & UPF_SHARE_IRQ)
+ if (up->port.irqflags & IRQF_SHARED)
disable_irq_nosync(up->port.irq);
wait_for_xmitr(up, UART_LSR_THRE);
@@ -2039,7 +2039,7 @@ static int serial8250_startup(struct uart_port *port)
iir = serial_in(up, UART_IIR);
serial_out(up, UART_IER, 0);
- if (up->port.flags & UPF_SHARE_IRQ)
+ if (up->port.irqflags & IRQF_SHARED)
enable_irq(up->port.irq);
spin_unlock_irqrestore(&up->port.lock, flags);
@@ -2272,7 +2272,9 @@ serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
/*
* Ask the core to calculate the divisor for us.
*/
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ baud = uart_get_baud_rate(port, termios, old,
+ port->uartclk / 16 / 0xffff,
+ port->uartclk / 16);
quot = serial8250_get_divisor(port, baud);
/*
@@ -2671,6 +2673,7 @@ static void __init serial8250_isa_init_ports(void)
i++, up++) {
up->port.iobase = old_serial_port[i].port;
up->port.irq = irq_canonicalize(old_serial_port[i].irq);
+ up->port.irqflags = old_serial_port[i].irqflags;
up->port.uartclk = old_serial_port[i].baud_base * 16;
up->port.flags = old_serial_port[i].flags;
up->port.hub6 = old_serial_port[i].hub6;
@@ -2679,7 +2682,7 @@ static void __init serial8250_isa_init_ports(void)
up->port.regshift = old_serial_port[i].iomem_reg_shift;
set_io_from_upio(&up->port);
if (share_irqs)
- up->port.flags |= UPF_SHARE_IRQ;
+ up->port.irqflags |= IRQF_SHARED;
}
}
@@ -2869,6 +2872,7 @@ int __init early_serial_setup(struct uart_port *port)
p->iobase = port->iobase;
p->membase = port->membase;
p->irq = port->irq;
+ p->irqflags = port->irqflags;
p->uartclk = port->uartclk;
p->fifosize = port->fifosize;
p->regshift = port->regshift;
@@ -2942,6 +2946,7 @@ static int __devinit serial8250_probe(struct platform_device *dev)
port.iobase = p->iobase;
port.membase = p->membase;
port.irq = p->irq;
+ port.irqflags = p->irqflags;
port.uartclk = p->uartclk;
port.regshift = p->regshift;
port.iotype = p->iotype;
@@ -2954,7 +2959,7 @@ static int __devinit serial8250_probe(struct platform_device *dev)
port.serial_out = p->serial_out;
port.dev = &dev->dev;
if (share_irqs)
- port.flags |= UPF_SHARE_IRQ;
+ port.irqflags |= IRQF_SHARED;
ret = serial8250_register_port(&port);
if (ret < 0) {
dev_err(&dev->dev, "unable to register port at index %d "
@@ -3096,6 +3101,7 @@ int serial8250_register_port(struct uart_port *port)
uart->port.iobase = port->iobase;
uart->port.membase = port->membase;
uart->port.irq = port->irq;
+ uart->port.irqflags = port->irqflags;
uart->port.uartclk = port->uartclk;
uart->port.fifosize = port->fifosize;
uart->port.regshift = port->regshift;
diff --git a/drivers/serial/8250.h b/drivers/serial/8250.h
index 520260326f3..6e19ea3e48d 100644
--- a/drivers/serial/8250.h
+++ b/drivers/serial/8250.h
@@ -25,6 +25,7 @@ struct old_serial_port {
unsigned char io_type;
unsigned char *iomem_base;
unsigned short iomem_reg_shift;
+ unsigned long irqflags;
};
/*
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index 58a4879c7e4..429a8ae8693 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -117,7 +117,7 @@ static void pl010_enable_ms(struct uart_port *port)
static void pl010_rx_chars(struct uart_amba_port *uap)
{
- struct tty_struct *tty = uap->port.info->port.tty;
+ struct tty_struct *tty = uap->port.state->port.tty;
unsigned int status, ch, flag, rsr, max_count = 256;
status = readb(uap->port.membase + UART01x_FR);
@@ -172,7 +172,7 @@ static void pl010_rx_chars(struct uart_amba_port *uap)
static void pl010_tx_chars(struct uart_amba_port *uap)
{
- struct circ_buf *xmit = &uap->port.info->xmit;
+ struct circ_buf *xmit = &uap->port.state->xmit;
int count;
if (uap->port.x_char) {
@@ -225,7 +225,7 @@ static void pl010_modem_status(struct uart_amba_port *uap)
if (delta & UART01x_FR_CTS)
uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS);
- wake_up_interruptible(&uap->port.info->delta_msr_wait);
+ wake_up_interruptible(&uap->port.state->port.delta_msr_wait);
}
static irqreturn_t pl010_int(int irq, void *dev_id)
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index 72ba0c6d355..ef7adc8135d 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -124,7 +124,7 @@ static void pl011_enable_ms(struct uart_port *port)
static void pl011_rx_chars(struct uart_amba_port *uap)
{
- struct tty_struct *tty = uap->port.info->port.tty;
+ struct tty_struct *tty = uap->port.state->port.tty;
unsigned int status, ch, flag, max_count = 256;
status = readw(uap->port.membase + UART01x_FR);
@@ -175,7 +175,7 @@ static void pl011_rx_chars(struct uart_amba_port *uap)
static void pl011_tx_chars(struct uart_amba_port *uap)
{
- struct circ_buf *xmit = &uap->port.info->xmit;
+ struct circ_buf *xmit = &uap->port.state->xmit;
int count;
if (uap->port.x_char) {
@@ -226,7 +226,7 @@ static void pl011_modem_status(struct uart_amba_port *uap)
if (delta & UART01x_FR_CTS)
uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS);
- wake_up_interruptible(&uap->port.info->delta_msr_wait);
+ wake_up_interruptible(&uap->port.state->port.delta_msr_wait);
}
static irqreturn_t pl011_int(int irq, void *dev_id)
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 607d43a3104..3551c5cb709 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -427,7 +427,7 @@ static void atmel_rx_chars(struct uart_port *port)
*/
static void atmel_tx_chars(struct uart_port *port)
{
- struct circ_buf *xmit = &port->info->xmit;
+ struct circ_buf *xmit = &port->state->xmit;
if (port->x_char && UART_GET_CSR(port) & ATMEL_US_TXRDY) {
UART_PUT_CHAR(port, port->x_char);
@@ -560,7 +560,7 @@ static irqreturn_t atmel_interrupt(int irq, void *dev_id)
static void atmel_tx_dma(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
- struct circ_buf *xmit = &port->info->xmit;
+ struct circ_buf *xmit = &port->state->xmit;
struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
int count;
@@ -663,14 +663,14 @@ static void atmel_rx_from_ring(struct uart_port *port)
* uart_start(), which takes the lock.
*/
spin_unlock(&port->lock);
- tty_flip_buffer_push(port->info->port.tty);
+ tty_flip_buffer_push(port->state->port.tty);
spin_lock(&port->lock);
}
static void atmel_rx_from_dma(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
- struct tty_struct *tty = port->info->port.tty;
+ struct tty_struct *tty = port->state->port.tty;
struct atmel_dma_buffer *pdc;
int rx_idx = atmel_port->pdc_rx_idx;
unsigned int head;
@@ -776,7 +776,7 @@ static void atmel_tasklet_func(unsigned long data)
if (status_change & ATMEL_US_CTS)
uart_handle_cts_change(port, !(status & ATMEL_US_CTS));
- wake_up_interruptible(&port->info->delta_msr_wait);
+ wake_up_interruptible(&port->state->port.delta_msr_wait);
atmel_port->irq_status_prev = status;
}
@@ -795,7 +795,7 @@ static void atmel_tasklet_func(unsigned long data)
static int atmel_startup(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
- struct tty_struct *tty = port->info->port.tty;
+ struct tty_struct *tty = port->state->port.tty;
int retval;
/*
@@ -854,7 +854,7 @@ static int atmel_startup(struct uart_port *port)
}
if (atmel_use_dma_tx(port)) {
struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
- struct circ_buf *xmit = &port->info->xmit;
+ struct circ_buf *xmit = &port->state->xmit;
pdc->buf = xmit->buf;
pdc->dma_addr = dma_map_single(port->dev,
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index b4a7650af69..50abb7e557f 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -42,6 +42,10 @@
# undef CONFIG_EARLY_PRINTK
#endif
+#ifdef CONFIG_SERIAL_BFIN_MODULE
+# undef CONFIG_EARLY_PRINTK
+#endif
+
/* UART name and device definitions */
#define BFIN_SERIAL_NAME "ttyBF"
#define BFIN_SERIAL_MAJOR 204
@@ -140,7 +144,7 @@ static void bfin_serial_stop_tx(struct uart_port *port)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
#ifdef CONFIG_SERIAL_BFIN_DMA
- struct circ_buf *xmit = &uart->port.info->xmit;
+ struct circ_buf *xmit = &uart->port.state->xmit;
#endif
while (!(UART_GET_LSR(uart) & TEMT))
@@ -167,7 +171,7 @@ static void bfin_serial_stop_tx(struct uart_port *port)
static void bfin_serial_start_tx(struct uart_port *port)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
- struct tty_struct *tty = uart->port.info->port.tty;
+ struct tty_struct *tty = uart->port.state->port.tty;
#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) {
@@ -239,10 +243,10 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
return;
}
- if (!uart->port.info || !uart->port.info->port.tty)
+ if (!uart->port.state || !uart->port.state->port.tty)
return;
#endif
- tty = uart->port.info->port.tty;
+ tty = uart->port.state->port.tty;
if (ANOMALY_05000363) {
/* The BF533 (and BF561) family of processors have a nice anomaly
@@ -327,7 +331,7 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
{
- struct circ_buf *xmit = &uart->port.info->xmit;
+ struct circ_buf *xmit = &uart->port.state->xmit;
if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
#ifdef CONFIG_BF54x
@@ -394,7 +398,7 @@ static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id)
#ifdef CONFIG_SERIAL_BFIN_DMA
static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
{
- struct circ_buf *xmit = &uart->port.info->xmit;
+ struct circ_buf *xmit = &uart->port.state->xmit;
uart->tx_done = 0;
@@ -432,7 +436,7 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart)
{
- struct tty_struct *tty = uart->port.info->port.tty;
+ struct tty_struct *tty = uart->port.state->port.tty;
int i, flg, status;
status = UART_GET_LSR(uart);
@@ -525,7 +529,7 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart)
static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id)
{
struct bfin_serial_port *uart = dev_id;
- struct circ_buf *xmit = &uart->port.info->xmit;
+ struct circ_buf *xmit = &uart->port.state->xmit;
#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
if (uart->scts && !(bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) {
@@ -961,10 +965,10 @@ static void bfin_serial_set_ldisc(struct uart_port *port)
int line = port->line;
unsigned short val;
- if (line >= port->info->port.tty->driver->num)
+ if (line >= port->state->port.tty->driver->num)
return;
- switch (port->info->port.tty->termios->c_line) {
+ switch (port->state->port.tty->termios->c_line) {
case N_IRDA:
val = UART_GET_GCTL(&bfin_serial_ports[line]);
val |= (IREN | RPOLC);
diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c
index c108b1a0ce9..088bb35475f 100644
--- a/drivers/serial/bfin_sport_uart.c
+++ b/drivers/serial/bfin_sport_uart.c
@@ -178,7 +178,7 @@ static int sport_uart_setup(struct sport_uart_port *up, int sclk, int baud_rate)
static irqreturn_t sport_uart_rx_irq(int irq, void *dev_id)
{
struct sport_uart_port *up = dev_id;
- struct tty_struct *tty = up->port.info->port.tty;
+ struct tty_struct *tty = up->port.state->port.tty;
unsigned int ch;
do {
@@ -205,7 +205,7 @@ static irqreturn_t sport_uart_tx_irq(int irq, void *dev_id)
static irqreturn_t sport_uart_err_irq(int irq, void *dev_id)
{
struct sport_uart_port *up = dev_id;
- struct tty_struct *tty = up->port.info->port.tty;
+ struct tty_struct *tty = up->port.state->port.tty;
unsigned int stat = SPORT_GET_STAT(up);
/* Overflow in RX FIFO */
@@ -290,7 +290,7 @@ fail1:
static void sport_uart_tx_chars(struct sport_uart_port *up)
{
- struct circ_buf *xmit = &up->port.info->xmit;
+ struct circ_buf *xmit = &up->port.state->xmit;
if (SPORT_GET_STAT(up) & TXF)
return;
diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c
index 80e76426131..b6acd19b458 100644
--- a/drivers/serial/clps711x.c
+++ b/drivers/serial/clps711x.c
@@ -93,7 +93,7 @@ static void clps711xuart_enable_ms(struct uart_port *port)
static irqreturn_t clps711xuart_int_rx(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
- struct tty_struct *tty = port->info->port.tty;
+ struct tty_struct *tty = port->state->port.tty;
unsigned int status, ch, flg;
status = clps_readl(SYSFLG(port));
@@ -147,7 +147,7 @@ static irqreturn_t clps711xuart_int_rx(int irq, void *dev_id)
static irqreturn_t clps711xuart_int_tx(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
- struct circ_buf *xmit = &port->info->xmit;
+ struct circ_buf *xmit = &port->state->xmit;
int count;
if (port->x_char) {
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index f8df0681e16..8d349b23249 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -244,7 +244,7 @@ static void cpm_uart_int_rx(struct uart_port *port)
int i;
unsigned char ch;
u8 *cp;
- struct tty_struct *tty = port->info->port.tty;
+ struct tty_struct *tty = port->state->port.tty;
struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
cbd_t __iomem *bdp;
u16 status;
diff --git a/drivers/serial/dz.c b/drivers/serial/dz.c
index 6042b87797a..57421d77632 100644
--- a/drivers/serial/dz.c
+++ b/drivers/serial/dz.c
@@ -197,7 +197,7 @@ static inline void dz_receive_chars(struct dz_mux *mux)
while ((status = dz_in(dport, DZ_RBUF)) & DZ_DVAL) {
dport = &mux->dport[LINE(status)];
uport = &dport->port;
- tty = uport->info->port.tty; /* point to the proper dev */
+ tty = uport->state->port.tty; /* point to the proper dev */
ch = UCHAR(status); /* grab the char */
flag = TTY_NORMAL;
@@ -249,7 +249,7 @@ static inline void dz_receive_chars(struct dz_mux *mux)
}
for (i = 0; i < DZ_NB_PORT; i++)
if (lines_rx[i])
- tty_flip_buffer_push(mux->dport[i].port.info->port.tty);
+ tty_flip_buffer_push(mux->dport[i].port.state->port.tty);
}
/*
@@ -268,7 +268,7 @@ static inline void dz_transmit_chars(struct dz_mux *mux)
status = dz_in(dport, DZ_CSR);
dport = &mux->dport[LINE(status)];
- xmit = &dport->port.info->xmit;
+ xmit = &dport->port.state->xmit;
if (dport->port.x_char) { /* XON/XOFF chars */
dz_out(dport, DZ_TDR, dport->port.x_char);
diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c
index cd1b6a45bb8..2d7feecaf49 100644
--- a/drivers/serial/icom.c
+++ b/drivers/serial/icom.c
@@ -617,7 +617,7 @@ static void shutdown(struct icom_port *icom_port)
* disable break condition
*/
cmdReg = readb(&icom_port->dram->CmdReg);
- if ((cmdReg | CMD_SND_BREAK) == CMD_SND_BREAK) {
+ if (cmdReg & CMD_SND_BREAK) {
writeb(cmdReg & ~CMD_SND_BREAK, &icom_port->dram->CmdReg);
}
}
@@ -627,7 +627,7 @@ static int icom_write(struct uart_port *port)
unsigned long data_count;
unsigned char cmdReg;
unsigned long offset;
- int temp_tail = port->info->xmit.tail;
+ int temp_tail = port->state->xmit.tail;
trace(ICOM_PORT, "WRITE", 0);
@@ -638,11 +638,11 @@ static int icom_write(struct uart_port *port)
}
data_count = 0;
- while ((port->info->xmit.head != temp_tail) &&
+ while ((port->state->xmit.head != temp_tail) &&
(data_count <= XMIT_BUFF_SZ)) {
ICOM_PORT->xmit_buf[data_count++] =
- port->info->xmit.buf[temp_tail];
+ port->state->xmit.buf[temp_tail];
temp_tail++;
temp_tail &= (UART_XMIT_SIZE - 1);
@@ -694,8 +694,8 @@ static inline void check_modem_status(struct icom_port *icom_port)
uart_handle_cts_change(&icom_port->uart_port,
delta_status & ICOM_CTS);
- wake_up_interruptible(&icom_port->uart_port.info->
- delta_msr_wait);
+ wake_up_interruptible(&icom_port->uart_port.state->
+ port.delta_msr_wait);
old_status = status;
}
spin_unlock(&icom_port->uart_port.lock);
@@ -718,10 +718,10 @@ static void xmit_interrupt(u16 port_int_reg, struct icom_port *icom_port)
icom_port->uart_port.icount.tx += count;
for (i=0; i<count &&
- !uart_circ_empty(&icom_port->uart_port.info->xmit); i++) {
+ !uart_circ_empty(&icom_port->uart_port.state->xmit); i++) {
- icom_port->uart_port.info->xmit.tail++;
- icom_port->uart_port.info->xmit.tail &=
+ icom_port->uart_port.state->xmit.tail++;
+ icom_port->uart_port.state->xmit.tail &=
(UART_XMIT_SIZE - 1);
}
@@ -735,7 +735,7 @@ static void xmit_interrupt(u16 port_int_reg, struct icom_port *icom_port)
static void recv_interrupt(u16 port_int_reg, struct icom_port *icom_port)
{
short int count, rcv_buff;
- struct tty_struct *tty = icom_port->uart_port.info->port.tty;
+ struct tty_struct *tty = icom_port->uart_port.state->port.tty;
unsigned short int status;
struct uart_icount *icount;
unsigned long offset;
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 7485afd0df4..18130f11238 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -224,7 +224,7 @@ static void imx_mctrl_check(struct imx_port *sport)
if (changed & TIOCM_CTS)
uart_handle_cts_change(&sport->port, status & TIOCM_CTS);
- wake_up_interruptible(&sport->port.info->delta_msr_wait);
+ wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
}
/*
@@ -236,7 +236,7 @@ static void imx_timeout(unsigned long data)
struct imx_port *sport = (struct imx_port *)data;
unsigned long flags;
- if (sport->port.info) {
+ if (sport->port.state) {
spin_lock_irqsave(&sport->port.lock, flags);
imx_mctrl_check(sport);
spin_unlock_irqrestore(&sport->port.lock, flags);
@@ -323,7 +323,7 @@ static void imx_enable_ms(struct uart_port *port)
static inline void imx_transmit_buffer(struct imx_port *sport)
{
- struct circ_buf *xmit = &sport->port.info->xmit;
+ struct circ_buf *xmit = &sport->port.state->xmit;
while (!(readl(sport->port.membase + UTS) & UTS_TXFULL)) {
/* send xmit->buf[xmit->tail]
@@ -388,7 +388,7 @@ static irqreturn_t imx_rtsint(int irq, void *dev_id)
writel(USR1_RTSD, sport->port.membase + USR1);
uart_handle_cts_change(&sport->port, !!val);
- wake_up_interruptible(&sport->port.info->delta_msr_wait);
+ wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
spin_unlock_irqrestore(&sport->port.lock, flags);
return IRQ_HANDLED;
@@ -397,7 +397,7 @@ static irqreturn_t imx_rtsint(int irq, void *dev_id)
static irqreturn_t imx_txint(int irq, void *dev_id)
{
struct imx_port *sport = dev_id;
- struct circ_buf *xmit = &sport->port.info->xmit;
+ struct circ_buf *xmit = &sport->port.state->xmit;
unsigned long flags;
spin_lock_irqsave(&sport->port.lock,flags);
@@ -427,7 +427,7 @@ static irqreturn_t imx_rxint(int irq, void *dev_id)
{
struct imx_port *sport = dev_id;
unsigned int rx,flg,ignored = 0;
- struct tty_struct *tty = sport->port.info->port.tty;
+ struct tty_struct *tty = sport->port.state->port.tty;
unsigned long flags, temp;
spin_lock_irqsave(&sport->port.lock,flags);
@@ -900,11 +900,11 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
rational_best_approximation(16 * div * baud, sport->port.uartclk,
1 << 16, 1 << 16, &num, &denom);
- if (port->info && port->info->port.tty) {
+ if (port->state && port->state->port.tty) {
tdiv64 = sport->port.uartclk;
tdiv64 *= num;
do_div(tdiv64, denom * 16 * div);
- tty_encode_baud_rate(sport->port.info->port.tty,
+ tty_encode_baud_rate(sport->port.state->port.tty,
(speed_t)tdiv64, (speed_t)tdiv64);
}
diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c
index ae3699d77dd..d8983dd5c4b 100644
--- a/drivers/serial/ioc3_serial.c
+++ b/drivers/serial/ioc3_serial.c
@@ -897,25 +897,25 @@ static void transmit_chars(struct uart_port *the_port)
char *start;
struct tty_struct *tty;
struct ioc3_port *port = get_ioc3_port(the_port);
- struct uart_info *info;
+ struct uart_state *state;
if (!the_port)
return;
if (!port)
return;
- info = the_port->info;
- tty = info->port.tty;
+ state = the_port->state;
+ tty = state->port.tty;
- if (uart_circ_empty(&info->xmit) || uart_tx_stopped(the_port)) {
+ if (uart_circ_empty(&state->xmit) || uart_tx_stopped(the_port)) {
/* Nothing to do or hw stopped */
set_notification(port, N_ALL_OUTPUT, 0);
return;
}
- head = info->xmit.head;
- tail = info->xmit.tail;
- start = (char *)&info->xmit.buf[tail];
+ head = state->xmit.head;
+ tail = state->xmit.tail;
+ start = (char *)&state->xmit.buf[tail];
/* write out all the data or until the end of the buffer */
xmit_count = (head < tail) ? (UART_XMIT_SIZE - tail) : (head - tail);
@@ -928,14 +928,14 @@ static void transmit_chars(struct uart_port *the_port)
/* advance the pointers */
tail += result;
tail &= UART_XMIT_SIZE - 1;
- info->xmit.tail = tail;
- start = (char *)&info->xmit.buf[tail];
+ state->xmit.tail = tail;
+ start = (char *)&state->xmit.buf[tail];
}
}
- if (uart_circ_chars_pending(&info->xmit) < WAKEUP_CHARS)
+ if (uart_circ_chars_pending(&state->xmit) < WAKEUP_CHARS)
uart_write_wakeup(the_port);
- if (uart_circ_empty(&info->xmit)) {
+ if (uart_circ_empty(&state->xmit)) {
set_notification(port, N_OUTPUT_LOWAT, 0);
} else {
set_notification(port, N_OUTPUT_LOWAT, 1);
@@ -956,7 +956,7 @@ ioc3_change_speed(struct uart_port *the_port,
unsigned int cflag;
int baud;
int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8;
- struct uart_info *info = the_port->info;
+ struct uart_state *state = the_port->state;
cflag = new_termios->c_cflag;
@@ -997,14 +997,14 @@ ioc3_change_speed(struct uart_port *the_port,
the_port->ignore_status_mask = N_ALL_INPUT;
- info->port.tty->low_latency = 1;
+ state->port.tty->low_latency = 1;
- if (I_IGNPAR(info->port.tty))
+ if (I_IGNPAR(state->port.tty))
the_port->ignore_status_mask &= ~(N_PARITY_ERROR
| N_FRAMING_ERROR);
- if (I_IGNBRK(info->port.tty)) {
+ if (I_IGNBRK(state->port.tty)) {
the_port->ignore_status_mask &= ~N_BREAK;
- if (I_IGNPAR(info->port.tty))
+ if (I_IGNPAR(state->port.tty))
the_port->ignore_status_mask &= ~N_OVERRUN_ERROR;
}
if (!(cflag & CREAD)) {
@@ -1286,8 +1286,8 @@ static inline int do_read(struct uart_port *the_port, char *buf, int len)
uart_handle_dcd_change
(port->ip_port, 0);
wake_up_interruptible
- (&the_port->info->
- delta_msr_wait);
+ (&the_port->state->
+ port.delta_msr_wait);
}
/* If we had any data to return, we
@@ -1392,21 +1392,21 @@ static int receive_chars(struct uart_port *the_port)
struct tty_struct *tty;
unsigned char ch[MAX_CHARS];
int read_count = 0, read_room, flip = 0;
- struct uart_info *info = the_port->info;
+ struct uart_state *state = the_port->state;
struct ioc3_port *port = get_ioc3_port(the_port);
unsigned long pflags;
/* Make sure all the pointers are "good" ones */
- if (!info)
+ if (!state)
return 0;
- if (!info->port.tty)
+ if (!state->port.tty)
return 0;
if (!(port->ip_flags & INPUT_ENABLE))
return 0;
spin_lock_irqsave(&the_port->lock, pflags);
- tty = info->port.tty;
+ tty = state->port.tty;
read_count = do_read(the_port, ch, MAX_CHARS);
if (read_count > 0) {
@@ -1491,7 +1491,7 @@ ioc3uart_intr_one(struct ioc3_submodule *is,
uart_handle_dcd_change(the_port,
shadow & SHADOW_DCD);
wake_up_interruptible
- (&the_port->info->delta_msr_wait);
+ (&the_port->state->port.delta_msr_wait);
} else if ((port->ip_notify & N_DDCD)
&& !(shadow & SHADOW_DCD)) {
/* Flag delta DCD/no DCD */
@@ -1511,7 +1511,7 @@ ioc3uart_intr_one(struct ioc3_submodule *is,
uart_handle_cts_change(the_port, shadow
& SHADOW_CTS);
wake_up_interruptible
- (&the_port->info->delta_msr_wait);
+ (&the_port->state->port.delta_msr_wait);
}
}
@@ -1721,14 +1721,14 @@ static void ic3_shutdown(struct uart_port *the_port)
{
unsigned long port_flags;
struct ioc3_port *port;
- struct uart_info *info;
+ struct uart_state *state;
port = get_ioc3_port(the_port);
if (!port)
return;
- info = the_port->info;
- wake_up_interruptible(&info->delta_msr_wait);
+ state = the_port->state;
+ wake_up_interruptible(&state->port.delta_msr_wait);
spin_lock_irqsave(&the_port->lock, port_flags);
set_notification(port, N_ALL, 0);
diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c
index e5c58fe7e74..2e02c3026d2 100644
--- a/drivers/serial/ioc4_serial.c
+++ b/drivers/serial/ioc4_serial.c
@@ -1627,25 +1627,25 @@ static void transmit_chars(struct uart_port *the_port)
char *start;
struct tty_struct *tty;
struct ioc4_port *port = get_ioc4_port(the_port, 0);
- struct uart_info *info;
+ struct uart_state *state;
if (!the_port)
return;
if (!port)
return;
- info = the_port->info;
- tty = info->port.tty;
+ state = the_port->state;
+ tty = state->port.tty;
- if (uart_circ_empty(&info->xmit) || uart_tx_stopped(the_port)) {
+ if (uart_circ_empty(&state->xmit) || uart_tx_stopped(the_port)) {
/* Nothing to do or hw stopped */
set_notification(port, N_ALL_OUTPUT, 0);
return;
}
- head = info->xmit.head;
- tail = info->xmit.tail;
- start = (char *)&info->xmit.buf[tail];
+ head = state->xmit.head;
+ tail = state->xmit.tail;
+ start = (char *)&state->xmit.buf[tail];
/* write out all the data or until the end of the buffer */
xmit_count = (head < tail) ? (UART_XMIT_SIZE - tail) : (head - tail);
@@ -1658,14 +1658,14 @@ static void transmit_chars(struct uart_port *the_port)
/* advance the pointers */
tail += result;
tail &= UART_XMIT_SIZE - 1;
- info->xmit.tail = tail;
- start = (char *)&info->xmit.buf[tail];
+ state->xmit.tail = tail;
+ start = (char *)&state->xmit.buf[tail];
}
}
- if (uart_circ_chars_pending(&info->xmit) < WAKEUP_CHARS)
+ if (uart_circ_chars_pending(&state->xmit) < WAKEUP_CHARS)
uart_write_wakeup(the_port);
- if (uart_circ_empty(&info->xmit)) {
+ if (uart_circ_empty(&state->xmit)) {
set_notification(port, N_OUTPUT_LOWAT, 0);
} else {
set_notification(port, N_OUTPUT_LOWAT, 1);
@@ -1686,7 +1686,7 @@ ioc4_change_speed(struct uart_port *the_port,
int baud, bits;
unsigned cflag;
int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8;
- struct uart_info *info = the_port->info;
+ struct uart_state *state = the_port->state;
cflag = new_termios->c_cflag;
@@ -1738,14 +1738,14 @@ ioc4_change_speed(struct uart_port *the_port,
the_port->ignore_status_mask = N_ALL_INPUT;
- info->port.tty->low_latency = 1;
+ state->port.tty->low_latency = 1;
- if (I_IGNPAR(info->port.tty))
+ if (I_IGNPAR(state->port.tty))
the_port->ignore_status_mask &= ~(N_PARITY_ERROR
| N_FRAMING_ERROR);
- if (I_IGNBRK(info->port.tty)) {
+ if (I_IGNBRK(state->port.tty)) {
the_port->ignore_status_mask &= ~N_BREAK;
- if (I_IGNPAR(info->port.tty))
+ if (I_IGNPAR(state->port.tty))
the_port->ignore_status_mask &= ~N_OVERRUN_ERROR;
}
if (!(cflag & CREAD)) {
@@ -1784,7 +1784,7 @@ ioc4_change_speed(struct uart_port *the_port,
static inline int ic4_startup_local(struct uart_port *the_port)
{
struct ioc4_port *port;
- struct uart_info *info;
+ struct uart_state *state;
if (!the_port)
return -1;
@@ -1793,7 +1793,7 @@ static inline int ic4_startup_local(struct uart_port *the_port)
if (!port)
return -1;
- info = the_port->info;
+ state = the_port->state;
local_open(port);
@@ -1801,7 +1801,7 @@ static inline int ic4_startup_local(struct uart_port *the_port)
ioc4_set_proto(port, the_port->mapbase);
/* set the speed of the serial port */
- ioc4_change_speed(the_port, info->port.tty->termios,
+ ioc4_change_speed(the_port, state->port.tty->termios,
(struct ktermios *)0);
return 0;
@@ -1882,7 +1882,7 @@ static void handle_intr(void *arg, uint32_t sio_ir)
the_port = port->ip_port;
the_port->icount.dcd = 1;
wake_up_interruptible
- (&the_port-> info->delta_msr_wait);
+ (&the_port->state->port.delta_msr_wait);
} else if ((port->ip_notify & N_DDCD)
&& !(shadow & IOC4_SHADOW_DCD)) {
/* Flag delta DCD/no DCD */
@@ -1904,7 +1904,7 @@ static void handle_intr(void *arg, uint32_t sio_ir)
the_port->icount.cts =
(shadow & IOC4_SHADOW_CTS) ? 1 : 0;
wake_up_interruptible
- (&the_port->info->delta_msr_wait);
+ (&the_port->state->port.delta_msr_wait);
}
}
@@ -2236,8 +2236,8 @@ static inline int do_read(struct uart_port *the_port, unsigned char *buf,
&& port->ip_port) {
the_port->icount.dcd = 0;
wake_up_interruptible
- (&the_port->info->
- delta_msr_wait);
+ (&the_port->state->
+ port.delta_msr_wait);
}
/* If we had any data to return, we
@@ -2341,17 +2341,17 @@ static void receive_chars(struct uart_port *the_port)
unsigned char ch[IOC4_MAX_CHARS];
int read_count, request_count = IOC4_MAX_CHARS;
struct uart_icount *icount;
- struct uart_info *info = the_port->info;
+ struct uart_state *state = the_port->state;
unsigned long pflags;
/* Make sure all the pointers are "good" ones */
- if (!info)
+ if (!state)
return;
- if (!info->port.tty)
+ if (!state->port.tty)
return;
spin_lock_irqsave(&the_port->lock, pflags);
- tty = info->port.tty;
+ tty = state->port.tty;
request_count = tty_buffer_request_room(tty, IOC4_MAX_CHARS);
@@ -2430,19 +2430,19 @@ static void ic4_shutdown(struct uart_port *the_port)
{
unsigned long port_flags;
struct ioc4_port *port;
- struct uart_info *info;
+ struct uart_state *state;
port = get_ioc4_port(the_port, 0);
if (!port)
return;
- info = the_port->info;
+ state = the_port->state;
port->ip_port = NULL;
- wake_up_interruptible(&info->delta_msr_wait);
+ wake_up_interruptible(&state->port.delta_msr_wait);
- if (info->port.tty)
- set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+ if (state->port.tty)
+ set_bit(TTY_IO_ERROR, &state->port.tty->flags);
spin_lock_irqsave(&the_port->lock, port_flags);
set_notification(port, N_ALL, 0);
@@ -2538,7 +2538,7 @@ static int ic4_startup(struct uart_port *the_port)
int retval;
struct ioc4_port *port;
struct ioc4_control *control;
- struct uart_info *info;
+ struct uart_state *state;
unsigned long port_flags;
if (!the_port)
@@ -2546,7 +2546,7 @@ static int ic4_startup(struct uart_port *the_port)
port = get_ioc4_port(the_port, 1);
if (!port)
return -ENODEV;
- info = the_port->info;
+ state = the_port->state;
control = port->ip_control;
if (!control) {
diff --git a/drivers/serial/ip22zilog.c b/drivers/serial/ip22zilog.c
index 0d9acbd0bb7..ebff4a1d4bc 100644
--- a/drivers/serial/ip22zilog.c
+++ b/drivers/serial/ip22zilog.c
@@ -256,9 +256,9 @@ static struct tty_struct *ip22zilog_receive_chars(struct uart_ip22zilog_port *up
unsigned int r1;
tty = NULL;
- if (up->port.info != NULL &&
- up->port.info->port.tty != NULL)
- tty = up->port.info->port.tty;
+ if (up->port.state != NULL &&
+ up->port.state->port.tty != NULL)
+ tty = up->port.state->port.tty;
for (;;) {
ch = readb(&channel->control);
@@ -354,7 +354,7 @@ static void ip22zilog_status_handle(struct uart_ip22zilog_port *up,
uart_handle_cts_change(&up->port,
(status & CTS));
- wake_up_interruptible(&up->port.info->delta_msr_wait);
+ wake_up_interruptible(&up->port.state->port.delta_msr_wait);
}
up->prev_status = status;
@@ -404,9 +404,9 @@ static void ip22zilog_transmit_chars(struct uart_ip22zilog_port *up,
return;
}
- if (up->port.info == NULL)
+ if (up->port.state == NULL)
goto ack_tx_int;
- xmit = &up->port.info->xmit;
+ xmit = &up->port.state->xmit;
if (uart_circ_empty(xmit))
goto ack_tx_int;
if (uart_tx_stopped(&up->port))
@@ -607,7 +607,7 @@ static void ip22zilog_start_tx(struct uart_port *port)
port->icount.tx++;
port->x_char = 0;
} else {
- struct circ_buf *xmit = &port->info->xmit;
+ struct circ_buf *xmit = &port->state->xmit;
writeb(xmit->buf[xmit->tail], &channel->data);
ZSDELAY();
diff --git a/drivers/serial/jsm/jsm_neo.c b/drivers/serial/jsm/jsm_neo.c
index 9dadaa11d26..b4b124e4828 100644
--- a/drivers/serial/jsm/jsm_neo.c
+++ b/drivers/serial/jsm/jsm_neo.c
@@ -989,7 +989,7 @@ static void neo_param(struct jsm_channel *ch)
{ 50, B50 },
};
- cflag = C_BAUD(ch->uart_port.info->port.tty);
+ cflag = C_BAUD(ch->uart_port.state->port.tty);
baud = 9600;
for (i = 0; i < ARRAY_SIZE(baud_rates); i++) {
if (baud_rates[i].cflag == cflag) {
diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c
index 00f4577d2f7..7439c037362 100644
--- a/drivers/serial/jsm/jsm_tty.c
+++ b/drivers/serial/jsm/jsm_tty.c
@@ -147,7 +147,7 @@ static void jsm_tty_send_xchar(struct uart_port *port, char ch)
struct ktermios *termios;
spin_lock_irqsave(&port->lock, lock_flags);
- termios = port->info->port.tty->termios;
+ termios = port->state->port.tty->termios;
if (ch == termios->c_cc[VSTART])
channel->ch_bd->bd_ops->send_start_character(channel);
@@ -245,7 +245,7 @@ static int jsm_tty_open(struct uart_port *port)
channel->ch_cached_lsr = 0;
channel->ch_stops_sent = 0;
- termios = port->info->port.tty->termios;
+ termios = port->state->port.tty->termios;
channel->ch_c_cflag = termios->c_cflag;
channel->ch_c_iflag = termios->c_iflag;
channel->ch_c_oflag = termios->c_oflag;
@@ -278,7 +278,7 @@ static void jsm_tty_close(struct uart_port *port)
jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "start\n");
bd = channel->ch_bd;
- ts = port->info->port.tty->termios;
+ ts = port->state->port.tty->termios;
channel->ch_flags &= ~(CH_STOPI);
@@ -530,7 +530,7 @@ void jsm_input(struct jsm_channel *ch)
if (!ch)
return;
- tp = ch->uart_port.info->port.tty;
+ tp = ch->uart_port.state->port.tty;
bd = ch->ch_bd;
if(!bd)
@@ -849,7 +849,7 @@ int jsm_tty_write(struct uart_port *port)
u16 tail;
u16 tmask;
u32 remain;
- int temp_tail = port->info->xmit.tail;
+ int temp_tail = port->state->xmit.tail;
struct jsm_channel *channel = (struct jsm_channel *)port;
tmask = WQUEUEMASK;
@@ -865,10 +865,10 @@ int jsm_tty_write(struct uart_port *port)
data_count = 0;
if (bufcount >= remain) {
bufcount -= remain;
- while ((port->info->xmit.head != temp_tail) &&
+ while ((port->state->xmit.head != temp_tail) &&
(data_count < remain)) {
channel->ch_wqueue[head++] =
- port->info->xmit.buf[temp_tail];
+ port->state->xmit.buf[temp_tail];
temp_tail++;
temp_tail &= (UART_XMIT_SIZE - 1);
@@ -880,10 +880,10 @@ int jsm_tty_write(struct uart_port *port)
data_count1 = 0;
if (bufcount > 0) {
remain = bufcount;
- while ((port->info->xmit.head != temp_tail) &&
+ while ((port->state->xmit.head != temp_tail) &&
(data_count1 < remain)) {
channel->ch_wqueue[head++] =
- port->info->xmit.buf[temp_tail];
+ port->state->xmit.buf[temp_tail];
temp_tail++;
temp_tail &= (UART_XMIT_SIZE - 1);
@@ -892,7 +892,7 @@ int jsm_tty_write(struct uart_port *port)
}
}
- port->info->xmit.tail = temp_tail;
+ port->state->xmit.tail = temp_tail;
data_count += data_count1;
if (data_count) {
diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c
index 611c97a1565..bea5c215460 100644
--- a/drivers/serial/m32r_sio.c
+++ b/drivers/serial/m32r_sio.c
@@ -286,7 +286,7 @@ static void m32r_sio_start_tx(struct uart_port *port)
{
#ifdef CONFIG_SERIAL_M32R_PLDSIO
struct uart_sio_port *up = (struct uart_sio_port *)port;
- struct circ_buf *xmit = &up->port.info->xmit;
+ struct circ_buf *xmit = &up->port.state->xmit;
if (!(up->ier & UART_IER_THRI)) {
up->ier |= UART_IER_THRI;
@@ -325,7 +325,7 @@ static void m32r_sio_enable_ms(struct uart_port *port)
static void receive_chars(struct uart_sio_port *up, int *status)
{
- struct tty_struct *tty = up->port.info->port.tty;
+ struct tty_struct *tty = up->port.state->port.tty;
unsigned char ch;
unsigned char flag;
int max_count = 256;
@@ -398,7 +398,7 @@ static void receive_chars(struct uart_sio_port *up, int *status)
static void transmit_chars(struct uart_sio_port *up)
{
- struct circ_buf *xmit = &up->port.info->xmit;
+ struct circ_buf *xmit = &up->port.state->xmit;
int count;
if (up->port.x_char) {
diff --git a/drivers/serial/max3100.c b/drivers/serial/max3100.c
index 9fd33e5622b..75ab00631c4 100644
--- a/drivers/serial/max3100.c
+++ b/drivers/serial/max3100.c
@@ -184,7 +184,7 @@ static void max3100_timeout(unsigned long data)
{
struct max3100_port *s = (struct max3100_port *)data;
- if (s->port.info) {
+ if (s->port.state) {
max3100_dowork(s);
mod_timer(&s->timer, jiffies + s->poll_time);
}
@@ -261,7 +261,7 @@ static void max3100_work(struct work_struct *w)
int rxchars;
u16 tx, rx;
int conf, cconf, rts, crts;
- struct circ_buf *xmit = &s->port.info->xmit;
+ struct circ_buf *xmit = &s->port.state->xmit;
dev_dbg(&s->spi->dev, "%s\n", __func__);
@@ -307,8 +307,8 @@ static void max3100_work(struct work_struct *w)
}
}
- if (rxchars > 16 && s->port.info->port.tty != NULL) {
- tty_flip_buffer_push(s->port.info->port.tty);
+ if (rxchars > 16 && s->port.state->port.tty != NULL) {
+ tty_flip_buffer_push(s->port.state->port.tty);
rxchars = 0;
}
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -320,8 +320,8 @@ static void max3100_work(struct work_struct *w)
(!uart_circ_empty(xmit) &&
!uart_tx_stopped(&s->port))));
- if (rxchars > 0 && s->port.info->port.tty != NULL)
- tty_flip_buffer_push(s->port.info->port.tty);
+ if (rxchars > 0 && s->port.state->port.tty != NULL)
+ tty_flip_buffer_push(s->port.state->port.tty);
}
static irqreturn_t max3100_irq(int irqno, void *dev_id)
@@ -429,7 +429,7 @@ max3100_set_termios(struct uart_port *port, struct ktermios *termios,
int baud = 0;
unsigned cflag;
u32 param_new, param_mask, parity = 0;
- struct tty_struct *tty = s->port.info->port.tty;
+ struct tty_struct *tty = s->port.state->port.tty;
dev_dbg(&s->spi->dev, "%s\n", __func__);
if (!tty)
@@ -529,7 +529,7 @@ max3100_set_termios(struct uart_port *port, struct ktermios *termios,
MAX3100_STATUS_OE;
/* we are sending char from a workqueue so enable */
- s->port.info->port.tty->low_latency = 1;
+ s->port.state->port.tty->low_latency = 1;
if (s->poll_time > 0)
del_timer_sync(&s->timer);
diff --git a/drivers/serial/mcf.c b/drivers/serial/mcf.c
index 0eefb07beba..b44382442bf 100644
--- a/drivers/serial/mcf.c
+++ b/drivers/serial/mcf.c
@@ -323,7 +323,7 @@ static void mcf_rx_chars(struct mcf_uart *pp)
uart_insert_char(port, status, MCFUART_USR_RXOVERRUN, ch, flag);
}
- tty_flip_buffer_push(port->info->port.tty);
+ tty_flip_buffer_push(port->state->port.tty);
}
/****************************************************************************/
@@ -331,7 +331,7 @@ static void mcf_rx_chars(struct mcf_uart *pp)
static void mcf_tx_chars(struct mcf_uart *pp)
{
struct uart_port *port = &pp->port;
- struct circ_buf *xmit = &port->info->xmit;
+ struct circ_buf *xmit = &port->state->xmit;
if (port->x_char) {
/* Send special char - probably flow control */
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index abbd146c50d..d7bcd074d38 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -745,7 +745,7 @@ static struct uart_ops mpc52xx_uart_ops = {
static inline int
mpc52xx_uart_int_rx_chars(struct uart_port *port)
{
- struct tty_struct *tty = port->info->port.tty;
+ struct tty_struct *tty = port->state->port.tty;
unsigned char ch, flag;
unsigned short status;
@@ -812,7 +812,7 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port)
static inline int
mpc52xx_uart_int_tx_chars(struct uart_port *port)
{
- struct circ_buf *xmit = &port->info->xmit;
+ struct circ_buf *xmit = &port->state->xmit;
/* Process out of band chars */
if (port->x_char) {
diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c
index 61d3ade5286..b5496c28e60 100644
--- a/drivers/serial/mpsc.c
+++ b/drivers/serial/mpsc.c
@@ -936,7 +936,7 @@ static int serial_polled;
static int mpsc_rx_intr(struct mpsc_port_info *pi)
{
struct mpsc_rx_desc *rxre;
- struct tty_struct *tty = pi->port.info->port.tty;
+ struct tty_struct *tty = pi->port.state->port.tty;
u32 cmdstat, bytes_in, i;
int rc = 0;
u8 *bp;
@@ -1109,7 +1109,7 @@ static void mpsc_setup_tx_desc(struct mpsc_port_info *pi, u32 count, u32 intr)
static void mpsc_copy_tx_data(struct mpsc_port_info *pi)
{
- struct circ_buf *xmit = &pi->port.info->xmit;
+ struct circ_buf *xmit = &pi->port.state->xmit;
u8 *bp;
u32 i;
diff --git a/drivers/serial/msm_serial.c b/drivers/serial/msm_serial.c
index f7c24baa141..b05c5aa02cb 100644
--- a/drivers/serial/msm_serial.c
+++ b/drivers/serial/msm_serial.c
@@ -88,7 +88,7 @@ static void msm_enable_ms(struct uart_port *port)
static void handle_rx(struct uart_port *port)
{
- struct tty_struct *tty = port->info->port.tty;
+ struct tty_struct *tty = port->state->port.tty;
unsigned int sr;
/*
@@ -136,7 +136,7 @@ static void handle_rx(struct uart_port *port)
static void handle_tx(struct uart_port *port)
{
- struct circ_buf *xmit = &port->info->xmit;
+ struct circ_buf *xmit = &port->state->xmit;
struct msm_port *msm_port = UART_TO_MSM(port);
int sent_tx;
@@ -169,7 +169,7 @@ static void handle_delta_cts(struct uart_port *port)
{
msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR);
port->icount.cts++;
- wake_up_interruptible(&port->info->delta_msr_wait);
+ wake_up_interruptible(&port->state->port.delta_msr_wait);
}
static irqreturn_t msm_irq(int irq, void *dev_id)
diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c
index 953a5ffa9b4..7571aaa138b 100644
--- a/drivers/serial/mux.c
+++ b/drivers/serial/mux.c
@@ -199,7 +199,7 @@ static void mux_break_ctl(struct uart_port *port, int break_state)
static void mux_write(struct uart_port *port)
{
int count;
- struct circ_buf *xmit = &port->info->xmit;
+ struct circ_buf *xmit = &port->state->xmit;
if(port->x_char) {
UART_PUT_CHAR(port, port->x_char);
@@ -243,7 +243,7 @@ static void mux_write(struct uart_port *port)
static void mux_read(struct uart_port *port)
{
int data;
- struct tty_struct *tty = port->info->port.tty;
+ struct tty_struct *tty = port->state->port.tty;
__u32 start_count = port->icount.rx;
while(1) {
diff --git a/drivers/serial/netx-serial.c b/drivers/serial/netx-serial.c
index 3e5dda8518b..7735c9f35fa 100644
--- a/drivers/serial/netx-serial.c
+++ b/drivers/serial/netx-serial.c
@@ -140,7 +140,7 @@ static void netx_enable_ms(struct uart_port *port)
static inline void netx_transmit_buffer(struct uart_port *port)
{
- struct circ_buf *xmit = &port->info->xmit;
+ struct circ_buf *xmit = &port->state->xmit;
if (port->x_char) {
writel(port->x_char, port->membase + UART_DR);
@@ -185,7 +185,7 @@ static unsigned int netx_tx_empty(struct uart_port *port)
static void netx_txint(struct uart_port *port)
{
- struct circ_buf *xmit = &port->info->xmit;
+ struct circ_buf *xmit = &port->state->xmit;
if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
netx_stop_tx(port);
@@ -201,7 +201,7 @@ static void netx_txint(struct uart_port *port)
static void netx_rxint(struct uart_port *port)
{
unsigned char rx, flg, status;
- struct tty_struct *tty = port->info->port.tty;
+ struct tty_struct *tty = port->state->port.tty;
while (!(readl(port->membase + UART_FR) & FR_RXFE)) {
rx = readl(port->membase + UART_DR);
diff --git a/drivers/serial/nwpserial.c b/drivers/serial/nwpserial.c
index 9e150b19d72..e1ab8ec0a4a 100644
--- a/drivers/serial/nwpserial.c
+++ b/drivers/serial/nwpserial.c
@@ -126,7 +126,7 @@ static void nwpserial_config_port(struct uart_port *port, int flags)
static irqreturn_t nwpserial_interrupt(int irq, void *dev_id)
{
struct nwpserial_port *up = dev_id;
- struct tty_struct *tty = up->port.info->port.tty;
+ struct tty_struct *tty = up->port.state->port.tty;
irqreturn_t ret;
unsigned int iir;
unsigned char ch;
@@ -261,7 +261,7 @@ static void nwpserial_start_tx(struct uart_port *port)
struct nwpserial_port *up;
struct circ_buf *xmit;
up = container_of(port, struct nwpserial_port, port);
- xmit = &up->port.info->xmit;
+ xmit = &up->port.state->xmit;
if (port->x_char) {
nwpserial_putchar(up, up->port.x_char);
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 9c1243fbd51..0700cd10b97 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -242,12 +242,12 @@ static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap)
}
/* Sanity check, make sure the old bug is no longer happening */
- if (uap->port.info == NULL || uap->port.info->port.tty == NULL) {
+ if (uap->port.state == NULL || uap->port.state->port.tty == NULL) {
WARN_ON(1);
(void)read_zsdata(uap);
return NULL;
}
- tty = uap->port.info->port.tty;
+ tty = uap->port.state->port.tty;
while (1) {
error = 0;
@@ -369,7 +369,7 @@ static void pmz_status_handle(struct uart_pmac_port *uap)
uart_handle_cts_change(&uap->port,
!(status & CTS));
- wake_up_interruptible(&uap->port.info->delta_msr_wait);
+ wake_up_interruptible(&uap->port.state->port.delta_msr_wait);
}
if (status & BRK_ABRT)
@@ -420,9 +420,9 @@ static void pmz_transmit_chars(struct uart_pmac_port *uap)
return;
}
- if (uap->port.info == NULL)
+ if (uap->port.state == NULL)
goto ack_tx_int;
- xmit = &uap->port.info->xmit;
+ xmit = &uap->port.state->xmit;
if (uart_circ_empty(xmit)) {
uart_write_wakeup(&uap->port);
goto ack_tx_int;
@@ -655,7 +655,7 @@ static void pmz_start_tx(struct uart_port *port)
port->icount.tx++;
port->x_char = 0;
} else {
- struct circ_buf *xmit = &port->info->xmit;
+ struct circ_buf *xmit = &port->state->xmit;
write_zsdata(uap, xmit->buf[xmit->tail]);
zssync(uap);
@@ -1645,7 +1645,7 @@ static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state)
state = pmz_uart_reg.state + uap->port.line;
mutex_lock(&pmz_irq_mutex);
- mutex_lock(&state->mutex);
+ mutex_lock(&state->port.mutex);
spin_lock_irqsave(&uap->port.lock, flags);
@@ -1676,7 +1676,7 @@ static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state)
/* Shut the chip down */
pmz_set_scc_power(uap, 0);
- mutex_unlock(&state->mutex);
+ mutex_unlock(&state->port.mutex);
mutex_unlock(&pmz_irq_mutex);
pmz_debug("suspend, switching complete\n");
@@ -1705,7 +1705,7 @@ static int pmz_resume(struct macio_dev *mdev)
state = pmz_uart_reg.state + uap->port.line;
mutex_lock(&pmz_irq_mutex);
- mutex_lock(&state->mutex);
+ mutex_lock(&state->port.mutex);
spin_lock_irqsave(&uap->port.lock, flags);
if (!ZS_IS_OPEN(uap) && !ZS_IS_CONS(uap)) {
@@ -1737,7 +1737,7 @@ static int pmz_resume(struct macio_dev *mdev)
}
bail:
- mutex_unlock(&state->mutex);
+ mutex_unlock(&state->port.mutex);
mutex_unlock(&pmz_irq_mutex);
/* Right now, we deal with delay by blocking here, I'll be
diff --git a/drivers/serial/pnx8xxx_uart.c b/drivers/serial/pnx8xxx_uart.c
index 1bb8f1b4576..0aa75a97531 100644
--- a/drivers/serial/pnx8xxx_uart.c
+++ b/drivers/serial/pnx8xxx_uart.c
@@ -100,7 +100,7 @@ static void pnx8xxx_mctrl_check(struct pnx8xxx_port *sport)
if (changed & TIOCM_CTS)
uart_handle_cts_change(&sport->port, status & TIOCM_CTS);
- wake_up_interruptible(&sport->port.info->delta_msr_wait);
+ wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
}
/*
@@ -112,7 +112,7 @@ static void pnx8xxx_timeout(unsigned long data)
struct pnx8xxx_port *sport = (struct pnx8xxx_port *)data;
unsigned long flags;
- if (sport->port.info) {
+ if (sport->port.state) {
spin_lock_irqsave(&sport->port.lock, flags);
pnx8xxx_mctrl_check(sport);
spin_unlock_irqrestore(&sport->port.lock, flags);
@@ -181,7 +181,7 @@ static void pnx8xxx_enable_ms(struct uart_port *port)
static void pnx8xxx_rx_chars(struct pnx8xxx_port *sport)
{
- struct tty_struct *tty = sport->port.info->port.tty;
+ struct tty_struct *tty = sport->port.state->port.tty;
unsigned int status, ch, flg;
status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) |
@@ -243,7 +243,7 @@ static void pnx8xxx_rx_chars(struct pnx8xxx_port *sport)
static void pnx8xxx_tx_chars(struct pnx8xxx_port *sport)
{
- struct circ_buf *xmit = &sport->port.info->xmit;
+ struct circ_buf *xmit = &sport->port.state->xmit;
if (sport->port.x_char) {
serial_out(sport, PNX8XXX_FIFO, sport->port.x_char);
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index a48a8a13d87..6443b7ff274 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -96,7 +96,7 @@ static void serial_pxa_stop_rx(struct uart_port *port)
static inline void receive_chars(struct uart_pxa_port *up, int *status)
{
- struct tty_struct *tty = up->port.info->port.tty;
+ struct tty_struct *tty = up->port.state->port.tty;
unsigned int ch, flag;
int max_count = 256;
@@ -161,7 +161,7 @@ static inline void receive_chars(struct uart_pxa_port *up, int *status)
static void transmit_chars(struct uart_pxa_port *up)
{
- struct circ_buf *xmit = &up->port.info->xmit;
+ struct circ_buf *xmit = &up->port.state->xmit;
int count;
if (up->port.x_char) {
@@ -220,7 +220,7 @@ static inline void check_modem_status(struct uart_pxa_port *up)
if (status & UART_MSR_DCTS)
uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
- wake_up_interruptible(&up->port.info->delta_msr_wait);
+ wake_up_interruptible(&up->port.state->port.delta_msr_wait);
}
/*
diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c
index 94530f01521..7f5e2687322 100644
--- a/drivers/serial/sa1100.c
+++ b/drivers/serial/sa1100.c
@@ -117,7 +117,7 @@ static void sa1100_mctrl_check(struct sa1100_port *sport)
if (changed & TIOCM_CTS)
uart_handle_cts_change(&sport->port, status & TIOCM_CTS);
- wake_up_interruptible(&sport->port.info->delta_msr_wait);
+ wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
}
/*
@@ -129,7 +129,7 @@ static void sa1100_timeout(unsigned long data)
struct sa1100_port *sport = (struct sa1100_port *)data;
unsigned long flags;
- if (sport->port.info) {
+ if (sport->port.state) {
spin_lock_irqsave(&sport->port.lock, flags);
sa1100_mctrl_check(sport);
spin_unlock_irqrestore(&sport->port.lock, flags);
@@ -189,7 +189,7 @@ static void sa1100_enable_ms(struct uart_port *port)
static void
sa1100_rx_chars(struct sa1100_port *sport)
{
- struct tty_struct *tty = sport->port.info->port.tty;
+ struct tty_struct *tty = sport->port.state->port.tty;
unsigned int status, ch, flg;
status = UTSR1_TO_SM(UART_GET_UTSR1(sport)) |
@@ -239,7 +239,7 @@ sa1100_rx_chars(struct sa1100_port *sport)
static void sa1100_tx_chars(struct sa1100_port *sport)
{
- struct circ_buf *xmit = &sport->port.info->xmit;
+ struct circ_buf *xmit = &sport->port.state->xmit;
if (sport->port.x_char) {
UART_PUT_CHAR(sport, sport->port.x_char);
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index c8851a0db63..1523e8d9ae7 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -196,7 +196,7 @@ s3c24xx_serial_rx_chars(int irq, void *dev_id)
{
struct s3c24xx_uart_port *ourport = dev_id;
struct uart_port *port = &ourport->port;
- struct tty_struct *tty = port->info->port.tty;
+ struct tty_struct *tty = port->state->port.tty;
unsigned int ufcon, ch, flag, ufstat, uerstat;
int max_count = 64;
@@ -281,7 +281,7 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
{
struct s3c24xx_uart_port *ourport = id;
struct uart_port *port = &ourport->port;
- struct circ_buf *xmit = &port->info->xmit;
+ struct circ_buf *xmit = &port->state->xmit;
int count = 256;
if (port->x_char) {
@@ -992,10 +992,10 @@ static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb,
struct ktermios *termios;
struct tty_struct *tty;
- if (uport->info == NULL)
+ if (uport->state == NULL)
goto exit;
- tty = uport->info->port.tty;
+ tty = uport->state->port.tty;
if (tty == NULL)
goto exit;
diff --git a/drivers/serial/sb1250-duart.c b/drivers/serial/sb1250-duart.c
index 319e8b83f6b..a2f2b325449 100644
--- a/drivers/serial/sb1250-duart.c
+++ b/drivers/serial/sb1250-duart.c
@@ -384,13 +384,13 @@ static void sbd_receive_chars(struct sbd_port *sport)
uart_insert_char(uport, status, M_DUART_OVRUN_ERR, ch, flag);
}
- tty_flip_buffer_push(uport->info->port.tty);
+ tty_flip_buffer_push(uport->state->port.tty);
}
static void sbd_transmit_chars(struct sbd_port *sport)
{
struct uart_port *uport = &sport->port;
- struct circ_buf *xmit = &sport->port.info->xmit;
+ struct circ_buf *xmit = &sport->port.state->xmit;
unsigned int mask;
int stop_tx;
@@ -440,7 +440,7 @@ static void sbd_status_handle(struct sbd_port *sport)
if (delta & ((M_DUART_IN_PIN2_VAL | M_DUART_IN_PIN0_VAL) <<
S_DUART_IN_PIN_CHNG))
- wake_up_interruptible(&uport->info->delta_msr_wait);
+ wake_up_interruptible(&uport->state->port.delta_msr_wait);
}
static irqreturn_t sbd_interrupt(int irq, void *dev_id)
diff --git a/drivers/serial/sc26xx.c b/drivers/serial/sc26xx.c
index e0be11ceaa2..75038ad2b24 100644
--- a/drivers/serial/sc26xx.c
+++ b/drivers/serial/sc26xx.c
@@ -140,8 +140,8 @@ static struct tty_struct *receive_chars(struct uart_port *port)
char flag;
u8 status;
- if (port->info != NULL) /* Unopened serial console */
- tty = port->info->port.tty;
+ if (port->state != NULL) /* Unopened serial console */
+ tty = port->state->port.tty;
while (limit-- > 0) {
status = READ_SC_PORT(port, SR);
@@ -190,10 +190,10 @@ static void transmit_chars(struct uart_port *port)
{
struct circ_buf *xmit;
- if (!port->info)
+ if (!port->state)
return;
- xmit = &port->info->xmit;
+ xmit = &port->state->xmit;
if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
sc26xx_disable_irq(port, IMR_TXRDY);
return;
@@ -316,7 +316,7 @@ static void sc26xx_stop_tx(struct uart_port *port)
/* port->lock held by caller. */
static void sc26xx_start_tx(struct uart_port *port)
{
- struct circ_buf *xmit = &port->info->xmit;
+ struct circ_buf *xmit = &port->state->xmit;
while (!uart_circ_empty(xmit)) {
if (!(READ_SC_PORT(port, SR) & SR_TXRDY)) {
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index b0bb29d804a..2514d00c0f6 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -29,10 +29,10 @@
#include <linux/console.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
-#include <linux/serial_core.h>
#include <linux/smp_lock.h>
#include <linux/device.h>
#include <linux/serial.h> /* for serial_state and serial_icounter_struct */
+#include <linux/serial_core.h>
#include <linux/delay.h>
#include <linux/mutex.h>
@@ -52,8 +52,6 @@ static struct lock_class_key port_lock_key;
#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8)
-#define uart_users(state) ((state)->count + (state)->info.port.blocked_open)
-
#ifdef CONFIG_SERIAL_CORE_CONSOLE
#define uart_console(port) ((port)->cons && (port)->cons->index == (port)->line)
#else
@@ -71,19 +69,19 @@ static void uart_change_pm(struct uart_state *state, int pm_state);
*/
void uart_write_wakeup(struct uart_port *port)
{
- struct uart_info *info = port->info;
+ struct uart_state *state = port->state;
/*
* This means you called this function _after_ the port was
* closed. No cookie for you.
*/
- BUG_ON(!info);
- tasklet_schedule(&info->tlet);
+ BUG_ON(!state);
+ tasklet_schedule(&state->tlet);
}
static void uart_stop(struct tty_struct *tty)
{
struct uart_state *state = tty->driver_data;
- struct uart_port *port = state->port;
+ struct uart_port *port = state->uart_port;
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
@@ -94,9 +92,9 @@ static void uart_stop(struct tty_struct *tty)
static void __uart_start(struct tty_struct *tty)
{
struct uart_state *state = tty->driver_data;
- struct uart_port *port = state->port;
+ struct uart_port *port = state->uart_port;
- if (!uart_circ_empty(&state->info.xmit) && state->info.xmit.buf &&
+ if (!uart_circ_empty(&state->xmit) && state->xmit.buf &&
!tty->stopped && !tty->hw_stopped)
port->ops->start_tx(port);
}
@@ -104,7 +102,7 @@ static void __uart_start(struct tty_struct *tty)
static void uart_start(struct tty_struct *tty)
{
struct uart_state *state = tty->driver_data;
- struct uart_port *port = state->port;
+ struct uart_port *port = state->uart_port;
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
@@ -115,7 +113,7 @@ static void uart_start(struct tty_struct *tty)
static void uart_tasklet_action(unsigned long data)
{
struct uart_state *state = (struct uart_state *)data;
- tty_wakeup(state->info.port.tty);
+ tty_wakeup(state->port.tty);
}
static inline void
@@ -141,12 +139,12 @@ uart_update_mctrl(struct uart_port *port, unsigned int set, unsigned int clear)
*/
static int uart_startup(struct uart_state *state, int init_hw)
{
- struct uart_info *info = &state->info;
- struct uart_port *port = state->port;
+ struct uart_port *uport = state->uart_port;
+ struct tty_port *port = &state->port;
unsigned long page;
int retval = 0;
- if (info->flags & UIF_INITIALIZED)
+ if (port->flags & ASYNC_INITIALIZED)
return 0;
/*
@@ -154,26 +152,26 @@ static int uart_startup(struct uart_state *state, int init_hw)
* once we have successfully opened the port. Also set
* up the tty->alt_speed kludge
*/
- set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+ set_bit(TTY_IO_ERROR, &port->tty->flags);
- if (port->type == PORT_UNKNOWN)
+ if (uport->type == PORT_UNKNOWN)
return 0;
/*
* Initialise and allocate the transmit and temporary
* buffer.
*/
- if (!info->xmit.buf) {
+ if (!state->xmit.buf) {
/* This is protected by the per port mutex */
page = get_zeroed_page(GFP_KERNEL);
if (!page)
return -ENOMEM;
- info->xmit.buf = (unsigned char *) page;
- uart_circ_clear(&info->xmit);
+ state->xmit.buf = (unsigned char *) page;
+ uart_circ_clear(&state->xmit);
}
- retval = port->ops->startup(port);
+ retval = uport->ops->startup(uport);
if (retval == 0) {
if (init_hw) {
/*
@@ -185,20 +183,20 @@ static int uart_startup(struct uart_state *state, int init_hw)
* Setup the RTS and DTR signals once the
* port is open and ready to respond.
*/
- if (info->port.tty->termios->c_cflag & CBAUD)
- uart_set_mctrl(port, TIOCM_RTS | TIOCM_DTR);
+ if (port->tty->termios->c_cflag & CBAUD)
+ uart_set_mctrl(uport, TIOCM_RTS | TIOCM_DTR);
}
- if (info->flags & UIF_CTS_FLOW) {
- spin_lock_irq(&port->lock);
- if (!(port->ops->get_mctrl(port) & TIOCM_CTS))
- info->port.tty->hw_stopped = 1;
- spin_unlock_irq(&port->lock);
+ if (port->flags & ASYNC_CTS_FLOW) {
+ spin_lock_irq(&uport->lock);
+ if (!(uport->ops->get_mctrl(uport) & TIOCM_CTS))
+ port->tty->hw_stopped = 1;
+ spin_unlock_irq(&uport->lock);
}
- info->flags |= UIF_INITIALIZED;
+ set_bit(ASYNCB_INITIALIZED, &port->flags);
- clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
+ clear_bit(TTY_IO_ERROR, &port->tty->flags);
}
if (retval && capable(CAP_SYS_ADMIN))
@@ -214,9 +212,9 @@ static int uart_startup(struct uart_state *state, int init_hw)
*/
static void uart_shutdown(struct uart_state *state)
{
- struct uart_info *info = &state->info;
- struct uart_port *port = state->port;
- struct tty_struct *tty = info->port.tty;
+ struct uart_port *uport = state->uart_port;
+ struct tty_port *port = &state->port;
+ struct tty_struct *tty = port->tty;
/*
* Set the TTY IO error marker
@@ -224,14 +222,12 @@ static void uart_shutdown(struct uart_state *state)
if (tty)
set_bit(TTY_IO_ERROR, &tty->flags);
- if (info->flags & UIF_INITIALIZED) {
- info->flags &= ~UIF_INITIALIZED;
-
+ if (test_and_clear_bit(ASYNCB_INITIALIZED, &port->flags)) {
/*
* Turn off DTR and RTS early.
*/
if (!tty || (tty->termios->c_cflag & HUPCL))
- uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+ uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
/*
* clear delta_msr_wait queue to avoid mem leaks: we may free
@@ -240,30 +236,30 @@ static void uart_shutdown(struct uart_state *state)
* any outstanding file descriptors should be pointing at
* hung_up_tty_fops now.
*/
- wake_up_interruptible(&info->delta_msr_wait);
+ wake_up_interruptible(&port->delta_msr_wait);
/*
* Free the IRQ and disable the port.
*/
- port->ops->shutdown(port);
+ uport->ops->shutdown(uport);
/*
* Ensure that the IRQ handler isn't running on another CPU.
*/
- synchronize_irq(port->irq);
+ synchronize_irq(uport->irq);
}
/*
* kill off our tasklet
*/
- tasklet_kill(&info->tlet);
+ tasklet_kill(&state->tlet);
/*
* Free the transmit buffer page.
*/
- if (info->xmit.buf) {
- free_page((unsigned long)info->xmit.buf);
- info->xmit.buf = NULL;
+ if (state->xmit.buf) {
+ free_page((unsigned long)state->xmit.buf);
+ state->xmit.buf = NULL;
}
}
@@ -430,15 +426,16 @@ EXPORT_SYMBOL(uart_get_divisor);
static void
uart_change_speed(struct uart_state *state, struct ktermios *old_termios)
{
- struct tty_struct *tty = state->info.port.tty;
- struct uart_port *port = state->port;
+ struct tty_port *port = &state->port;
+ struct tty_struct *tty = port->tty;
+ struct uart_port *uport = state->uart_port;
struct ktermios *termios;
/*
* If we have no tty, termios, or the port does not exist,
* then we can't set the parameters for this port.
*/
- if (!tty || !tty->termios || port->type == PORT_UNKNOWN)
+ if (!tty || !tty->termios || uport->type == PORT_UNKNOWN)
return;
termios = tty->termios;
@@ -447,16 +444,16 @@ uart_change_speed(struct uart_state *state, struct ktermios *old_termios)
* Set flags based on termios cflag
*/
if (termios->c_cflag & CRTSCTS)
- state->info.flags |= UIF_CTS_FLOW;
+ set_bit(ASYNCB_CTS_FLOW, &port->flags);
else
- state->info.flags &= ~UIF_CTS_FLOW;
+ clear_bit(ASYNCB_CTS_FLOW, &port->flags);
if (termios->c_cflag & CLOCAL)
- state->info.flags &= ~UIF_CHECK_CD;
+ clear_bit(ASYNCB_CHECK_CD, &port->flags);
else
- state->info.flags |= UIF_CHECK_CD;
+ set_bit(ASYNCB_CHECK_CD, &port->flags);
- port->ops->set_termios(port, termios, old_termios);
+ uport->ops->set_termios(uport, termios, old_termios);
}
static inline int
@@ -482,7 +479,7 @@ static int uart_put_char(struct tty_struct *tty, unsigned char ch)
{
struct uart_state *state = tty->driver_data;
- return __uart_put_char(state->port, &state->info.xmit, ch);
+ return __uart_put_char(state->uart_port, &state->xmit, ch);
}
static void uart_flush_chars(struct tty_struct *tty)
@@ -508,8 +505,8 @@ uart_write(struct tty_struct *tty, const unsigned char *buf, int count)
return -EL3HLT;
}
- port = state->port;
- circ = &state->info.xmit;
+ port = state->uart_port;
+ circ = &state->xmit;
if (!circ->buf)
return 0;
@@ -539,9 +536,9 @@ static int uart_write_room(struct tty_struct *tty)
unsigned long flags;
int ret;
- spin_lock_irqsave(&state->port->lock, flags);
- ret = uart_circ_chars_free(&state->info.xmit);
- spin_unlock_irqrestore(&state->port->lock, flags);
+ spin_lock_irqsave(&state->uart_port->lock, flags);
+ ret = uart_circ_chars_free(&state->xmit);
+ spin_unlock_irqrestore(&state->uart_port->lock, flags);
return ret;
}
@@ -551,9 +548,9 @@ static int uart_chars_in_buffer(struct tty_struct *tty)
unsigned long flags;
int ret;
- spin_lock_irqsave(&state->port->lock, flags);
- ret = uart_circ_chars_pending(&state->info.xmit);
- spin_unlock_irqrestore(&state->port->lock, flags);
+ spin_lock_irqsave(&state->uart_port->lock, flags);
+ ret = uart_circ_chars_pending(&state->xmit);
+ spin_unlock_irqrestore(&state->uart_port->lock, flags);
return ret;
}
@@ -572,11 +569,11 @@ static void uart_flush_buffer(struct tty_struct *tty)
return;
}
- port = state->port;
+ port = state->uart_port;
pr_debug("uart_flush_buffer(%d) called\n", tty->index);
spin_lock_irqsave(&port->lock, flags);
- uart_circ_clear(&state->info.xmit);
+ uart_circ_clear(&state->xmit);
if (port->ops->flush_buffer)
port->ops->flush_buffer(port);
spin_unlock_irqrestore(&port->lock, flags);
@@ -590,7 +587,7 @@ static void uart_flush_buffer(struct tty_struct *tty)
static void uart_send_xchar(struct tty_struct *tty, char ch)
{
struct uart_state *state = tty->driver_data;
- struct uart_port *port = state->port;
+ struct uart_port *port = state->uart_port;
unsigned long flags;
if (port->ops->send_xchar)
@@ -613,13 +610,13 @@ static void uart_throttle(struct tty_struct *tty)
uart_send_xchar(tty, STOP_CHAR(tty));
if (tty->termios->c_cflag & CRTSCTS)
- uart_clear_mctrl(state->port, TIOCM_RTS);
+ uart_clear_mctrl(state->uart_port, TIOCM_RTS);
}
static void uart_unthrottle(struct tty_struct *tty)
{
struct uart_state *state = tty->driver_data;
- struct uart_port *port = state->port;
+ struct uart_port *port = state->uart_port;
if (I_IXOFF(tty)) {
if (port->x_char)
@@ -635,35 +632,36 @@ static void uart_unthrottle(struct tty_struct *tty)
static int uart_get_info(struct uart_state *state,
struct serial_struct __user *retinfo)
{
- struct uart_port *port = state->port;
+ struct uart_port *uport = state->uart_port;
+ struct tty_port *port = &state->port;
struct serial_struct tmp;
memset(&tmp, 0, sizeof(tmp));
/* Ensure the state we copy is consistent and no hardware changes
occur as we go */
- mutex_lock(&state->mutex);
+ mutex_lock(&port->mutex);
- tmp.type = port->type;
- tmp.line = port->line;
- tmp.port = port->iobase;
+ tmp.type = uport->type;
+ tmp.line = uport->line;
+ tmp.port = uport->iobase;
if (HIGH_BITS_OFFSET)
- tmp.port_high = (long) port->iobase >> HIGH_BITS_OFFSET;
- tmp.irq = port->irq;
- tmp.flags = port->flags;
- tmp.xmit_fifo_size = port->fifosize;
- tmp.baud_base = port->uartclk / 16;
- tmp.close_delay = state->close_delay / 10;
- tmp.closing_wait = state->closing_wait == USF_CLOSING_WAIT_NONE ?
+ tmp.port_high = (long) uport->iobase >> HIGH_BITS_OFFSET;
+ tmp.irq = uport->irq;
+ tmp.flags = uport->flags;
+ tmp.xmit_fifo_size = uport->fifosize;
+ tmp.baud_base = uport->uartclk / 16;
+ tmp.close_delay = port->close_delay / 10;
+ tmp.closing_wait = port->closing_wait == ASYNC_CLOSING_WAIT_NONE ?
ASYNC_CLOSING_WAIT_NONE :
- state->closing_wait / 10;
- tmp.custom_divisor = port->custom_divisor;
- tmp.hub6 = port->hub6;
- tmp.io_type = port->iotype;
- tmp.iomem_reg_shift = port->regshift;
- tmp.iomem_base = (void *)(unsigned long)port->mapbase;
+ port->closing_wait / 10;
+ tmp.custom_divisor = uport->custom_divisor;
+ tmp.hub6 = uport->hub6;
+ tmp.io_type = uport->iotype;
+ tmp.iomem_reg_shift = uport->regshift;
+ tmp.iomem_base = (void *)(unsigned long)uport->mapbase;
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
return -EFAULT;
@@ -674,7 +672,8 @@ static int uart_set_info(struct uart_state *state,
struct serial_struct __user *newinfo)
{
struct serial_struct new_serial;
- struct uart_port *port = state->port;
+ struct uart_port *uport = state->uart_port;
+ struct tty_port *port = &state->port;
unsigned long new_port;
unsigned int change_irq, change_port, closing_wait;
unsigned int old_custom_divisor, close_delay;
@@ -691,58 +690,58 @@ static int uart_set_info(struct uart_state *state,
new_serial.irq = irq_canonicalize(new_serial.irq);
close_delay = new_serial.close_delay * 10;
closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
- USF_CLOSING_WAIT_NONE : new_serial.closing_wait * 10;
+ ASYNC_CLOSING_WAIT_NONE : new_serial.closing_wait * 10;
/*
- * This semaphore protects state->count. It is also
+ * This semaphore protects port->count. It is also
* very useful to prevent opens. Also, take the
* port configuration semaphore to make sure that a
* module insertion/removal doesn't change anything
* under us.
*/
- mutex_lock(&state->mutex);
+ mutex_lock(&port->mutex);
- change_irq = !(port->flags & UPF_FIXED_PORT)
- && new_serial.irq != port->irq;
+ change_irq = !(uport->flags & UPF_FIXED_PORT)
+ && new_serial.irq != uport->irq;
/*
* Since changing the 'type' of the port changes its resource
* allocations, we should treat type changes the same as
* IO port changes.
*/
- change_port = !(port->flags & UPF_FIXED_PORT)
- && (new_port != port->iobase ||
- (unsigned long)new_serial.iomem_base != port->mapbase ||
- new_serial.hub6 != port->hub6 ||
- new_serial.io_type != port->iotype ||
- new_serial.iomem_reg_shift != port->regshift ||
- new_serial.type != port->type);
-
- old_flags = port->flags;
+ change_port = !(uport->flags & UPF_FIXED_PORT)
+ && (new_port != uport->iobase ||
+ (unsigned long)new_serial.iomem_base != uport->mapbase ||
+ new_serial.hub6 != uport->hub6 ||
+ new_serial.io_type != uport->iotype ||
+ new_serial.iomem_reg_shift != uport->regshift ||
+ new_serial.type != uport->type);
+
+ old_flags = uport->flags;
new_flags = new_serial.flags;
- old_custom_divisor = port->custom_divisor;
+ old_custom_divisor = uport->custom_divisor;
if (!capable(CAP_SYS_ADMIN)) {
retval = -EPERM;
if (change_irq || change_port ||
- (new_serial.baud_base != port->uartclk / 16) ||
- (close_delay != state->close_delay) ||
- (closing_wait != state->closing_wait) ||
+ (new_serial.baud_base != uport->uartclk / 16) ||
+ (close_delay != port->close_delay) ||
+ (closing_wait != port->closing_wait) ||
(new_serial.xmit_fifo_size &&
- new_serial.xmit_fifo_size != port->fifosize) ||
+ new_serial.xmit_fifo_size != uport->fifosize) ||
(((new_flags ^ old_flags) & ~UPF_USR_MASK) != 0))
goto exit;
- port->flags = ((port->flags & ~UPF_USR_MASK) |
+ uport->flags = ((uport->flags & ~UPF_USR_MASK) |
(new_flags & UPF_USR_MASK));
- port->custom_divisor = new_serial.custom_divisor;
+ uport->custom_divisor = new_serial.custom_divisor;
goto check_and_exit;
}
/*
* Ask the low level driver to verify the settings.
*/
- if (port->ops->verify_port)
- retval = port->ops->verify_port(port, &new_serial);
+ if (uport->ops->verify_port)
+ retval = uport->ops->verify_port(uport, &new_serial);
if ((new_serial.irq >= nr_irqs) || (new_serial.irq < 0) ||
(new_serial.baud_base < 9600))
@@ -757,7 +756,7 @@ static int uart_set_info(struct uart_state *state,
/*
* Make sure that we are the sole user of this port.
*/
- if (uart_users(state) > 1)
+ if (tty_port_users(port) > 1)
goto exit;
/*
@@ -771,31 +770,31 @@ static int uart_set_info(struct uart_state *state,
unsigned long old_iobase, old_mapbase;
unsigned int old_type, old_iotype, old_hub6, old_shift;
- old_iobase = port->iobase;
- old_mapbase = port->mapbase;
- old_type = port->type;
- old_hub6 = port->hub6;
- old_iotype = port->iotype;
- old_shift = port->regshift;
+ old_iobase = uport->iobase;
+ old_mapbase = uport->mapbase;
+ old_type = uport->type;
+ old_hub6 = uport->hub6;
+ old_iotype = uport->iotype;
+ old_shift = uport->regshift;
/*
* Free and release old regions
*/
if (old_type != PORT_UNKNOWN)
- port->ops->release_port(port);
+ uport->ops->release_port(uport);
- port->iobase = new_port;
- port->type = new_serial.type;
- port->hub6 = new_serial.hub6;
- port->iotype = new_serial.io_type;
- port->regshift = new_serial.iomem_reg_shift;
- port->mapbase = (unsigned long)new_serial.iomem_base;
+ uport->iobase = new_port;
+ uport->type = new_serial.type;
+ uport->hub6 = new_serial.hub6;
+ uport->iotype = new_serial.io_type;
+ uport->regshift = new_serial.iomem_reg_shift;
+ uport->mapbase = (unsigned long)new_serial.iomem_base;
/*
* Claim and map the new regions
*/
- if (port->type != PORT_UNKNOWN) {
- retval = port->ops->request_port(port);
+ if (uport->type != PORT_UNKNOWN) {
+ retval = uport->ops->request_port(uport);
} else {
/* Always success - Jean II */
retval = 0;
@@ -806,19 +805,19 @@ static int uart_set_info(struct uart_state *state,
* new port, try to restore the old settings.
*/
if (retval && old_type != PORT_UNKNOWN) {
- port->iobase = old_iobase;
- port->type = old_type;
- port->hub6 = old_hub6;
- port->iotype = old_iotype;
- port->regshift = old_shift;
- port->mapbase = old_mapbase;
- retval = port->ops->request_port(port);
+ uport->iobase = old_iobase;
+ uport->type = old_type;
+ uport->hub6 = old_hub6;
+ uport->iotype = old_iotype;
+ uport->regshift = old_shift;
+ uport->mapbase = old_mapbase;
+ retval = uport->ops->request_port(uport);
/*
* If we failed to restore the old settings,
* we fail like this.
*/
if (retval)
- port->type = PORT_UNKNOWN;
+ uport->type = PORT_UNKNOWN;
/*
* We failed anyway.
@@ -830,45 +829,45 @@ static int uart_set_info(struct uart_state *state,
}
if (change_irq)
- port->irq = new_serial.irq;
- if (!(port->flags & UPF_FIXED_PORT))
- port->uartclk = new_serial.baud_base * 16;
- port->flags = (port->flags & ~UPF_CHANGE_MASK) |
+ uport->irq = new_serial.irq;
+ if (!(uport->flags & UPF_FIXED_PORT))
+ uport->uartclk = new_serial.baud_base * 16;
+ uport->flags = (uport->flags & ~UPF_CHANGE_MASK) |
(new_flags & UPF_CHANGE_MASK);
- port->custom_divisor = new_serial.custom_divisor;
- state->close_delay = close_delay;
- state->closing_wait = closing_wait;
+ uport->custom_divisor = new_serial.custom_divisor;
+ port->close_delay = close_delay;
+ port->closing_wait = closing_wait;
if (new_serial.xmit_fifo_size)
- port->fifosize = new_serial.xmit_fifo_size;
- if (state->info.port.tty)
- state->info.port.tty->low_latency =
- (port->flags & UPF_LOW_LATENCY) ? 1 : 0;
+ uport->fifosize = new_serial.xmit_fifo_size;
+ if (port->tty)
+ port->tty->low_latency =
+ (uport->flags & UPF_LOW_LATENCY) ? 1 : 0;
check_and_exit:
retval = 0;
- if (port->type == PORT_UNKNOWN)
+ if (uport->type == PORT_UNKNOWN)
goto exit;
- if (state->info.flags & UIF_INITIALIZED) {
- if (((old_flags ^ port->flags) & UPF_SPD_MASK) ||
- old_custom_divisor != port->custom_divisor) {
+ if (port->flags & ASYNC_INITIALIZED) {
+ if (((old_flags ^ uport->flags) & UPF_SPD_MASK) ||
+ old_custom_divisor != uport->custom_divisor) {
/*
* If they're setting up a custom divisor or speed,
* instead of clearing it, then bitch about it. No
* need to rate-limit; it's CAP_SYS_ADMIN only.
*/
- if (port->flags & UPF_SPD_MASK) {
+ if (uport->flags & UPF_SPD_MASK) {
char buf[64];
printk(KERN_NOTICE
"%s sets custom speed on %s. This "
"is deprecated.\n", current->comm,
- tty_name(state->info.port.tty, buf));
+ tty_name(port->tty, buf));
}
uart_change_speed(state, NULL);
}
} else
retval = uart_startup(state, 1);
exit:
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
return retval;
}
@@ -880,10 +879,11 @@ static int uart_set_info(struct uart_state *state,
static int uart_get_lsr_info(struct uart_state *state,
unsigned int __user *value)
{
- struct uart_port *port = state->port;
+ struct uart_port *uport = state->uart_port;
+ struct tty_port *port = &state->port;
unsigned int result;
- result = port->ops->tx_empty(port);
+ result = uport->ops->tx_empty(uport);
/*
* If we're about to load something into the transmit
@@ -891,9 +891,9 @@ static int uart_get_lsr_info(struct uart_state *state,
* avoid a race condition (depending on when the transmit
* interrupt happens).
*/
- if (port->x_char ||
- ((uart_circ_chars_pending(&state->info.xmit) > 0) &&
- !state->info.port.tty->stopped && !state->info.port.tty->hw_stopped))
+ if (uport->x_char ||
+ ((uart_circ_chars_pending(&state->xmit) > 0) &&
+ !port->tty->stopped && !port->tty->hw_stopped))
result &= ~TIOCSER_TEMT;
return put_user(result, value);
@@ -902,19 +902,20 @@ static int uart_get_lsr_info(struct uart_state *state,
static int uart_tiocmget(struct tty_struct *tty, struct file *file)
{
struct uart_state *state = tty->driver_data;
- struct uart_port *port = state->port;
+ struct tty_port *port = &state->port;
+ struct uart_port *uport = state->uart_port;
int result = -EIO;
- mutex_lock(&state->mutex);
+ mutex_lock(&port->mutex);
if ((!file || !tty_hung_up_p(file)) &&
!(tty->flags & (1 << TTY_IO_ERROR))) {
- result = port->mctrl;
+ result = uport->mctrl;
- spin_lock_irq(&port->lock);
- result |= port->ops->get_mctrl(port);
- spin_unlock_irq(&port->lock);
+ spin_lock_irq(&uport->lock);
+ result |= uport->ops->get_mctrl(uport);
+ spin_unlock_irq(&uport->lock);
}
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
return result;
}
@@ -924,36 +925,39 @@ uart_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear)
{
struct uart_state *state = tty->driver_data;
- struct uart_port *port = state->port;
+ struct uart_port *uport = state->uart_port;
+ struct tty_port *port = &state->port;
int ret = -EIO;
- mutex_lock(&state->mutex);
+ mutex_lock(&port->mutex);
if ((!file || !tty_hung_up_p(file)) &&
!(tty->flags & (1 << TTY_IO_ERROR))) {
- uart_update_mctrl(port, set, clear);
+ uart_update_mctrl(uport, set, clear);
ret = 0;
}
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
return ret;
}
static int uart_break_ctl(struct tty_struct *tty, int break_state)
{
struct uart_state *state = tty->driver_data;
- struct uart_port *port = state->port;
+ struct tty_port *port = &state->port;
+ struct uart_port *uport = state->uart_port;
- mutex_lock(&state->mutex);
+ mutex_lock(&port->mutex);
- if (port->type != PORT_UNKNOWN)
- port->ops->break_ctl(port, break_state);
+ if (uport->type != PORT_UNKNOWN)
+ uport->ops->break_ctl(uport, break_state);
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
return 0;
}
static int uart_do_autoconfig(struct uart_state *state)
{
- struct uart_port *port = state->port;
+ struct uart_port *uport = state->uart_port;
+ struct tty_port *port = &state->port;
int flags, ret;
if (!capable(CAP_SYS_ADMIN))
@@ -964,33 +968,33 @@ static int uart_do_autoconfig(struct uart_state *state)
* changing, and hence any extra opens of the port while
* we're auto-configuring.
*/
- if (mutex_lock_interruptible(&state->mutex))
+ if (mutex_lock_interruptible(&port->mutex))
return -ERESTARTSYS;
ret = -EBUSY;
- if (uart_users(state) == 1) {
+ if (tty_port_users(port) == 1) {
uart_shutdown(state);
/*
* If we already have a port type configured,
* we must release its resources.
*/
- if (port->type != PORT_UNKNOWN)
- port->ops->release_port(port);
+ if (uport->type != PORT_UNKNOWN)
+ uport->ops->release_port(uport);
flags = UART_CONFIG_TYPE;
- if (port->flags & UPF_AUTO_IRQ)
+ if (uport->flags & UPF_AUTO_IRQ)
flags |= UART_CONFIG_IRQ;
/*
* This will claim the ports resources if
* a port is found.
*/
- port->ops->config_port(port, flags);
+ uport->ops->config_port(uport, flags);
ret = uart_startup(state, 1);
}
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
return ret;
}
@@ -999,11 +1003,15 @@ static int uart_do_autoconfig(struct uart_state *state)
* - mask passed in arg for lines of interest
* (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
* Caller should use TIOCGICOUNT to see which one it was
+ *
+ * FIXME: This wants extracting into a common all driver implementation
+ * of TIOCMWAIT using tty_port.
*/
static int
uart_wait_modem_status(struct uart_state *state, unsigned long arg)
{
- struct uart_port *port = state->port;
+ struct uart_port *uport = state->uart_port;
+ struct tty_port *port = &state->port;
DECLARE_WAITQUEUE(wait, current);
struct uart_icount cprev, cnow;
int ret;
@@ -1011,20 +1019,20 @@ uart_wait_modem_status(struct uart_state *state, unsigned long arg)
/*
* note the counters on entry
*/
- spin_lock_irq(&port->lock);
- memcpy(&cprev, &port->icount, sizeof(struct uart_icount));
+ spin_lock_irq(&uport->lock);
+ memcpy(&cprev, &uport->icount, sizeof(struct uart_icount));
/*
* Force modem status interrupts on
*/
- port->ops->enable_ms(port);
- spin_unlock_irq(&port->lock);
+ uport->ops->enable_ms(uport);
+ spin_unlock_irq(&uport->lock);
- add_wait_queue(&state->info.delta_msr_wait, &wait);
+ add_wait_queue(&port->delta_msr_wait, &wait);
for (;;) {
- spin_lock_irq(&port->lock);
- memcpy(&cnow, &port->icount, sizeof(struct uart_icount));
- spin_unlock_irq(&port->lock);
+ spin_lock_irq(&uport->lock);
+ memcpy(&cnow, &uport->icount, sizeof(struct uart_icount));
+ spin_unlock_irq(&uport->lock);
set_current_state(TASK_INTERRUPTIBLE);
@@ -1048,7 +1056,7 @@ uart_wait_modem_status(struct uart_state *state, unsigned long arg)
}
current->state = TASK_RUNNING;
- remove_wait_queue(&state->info.delta_msr_wait, &wait);
+ remove_wait_queue(&port->delta_msr_wait, &wait);
return ret;
}
@@ -1064,11 +1072,11 @@ static int uart_get_count(struct uart_state *state,
{
struct serial_icounter_struct icount;
struct uart_icount cnow;
- struct uart_port *port = state->port;
+ struct uart_port *uport = state->uart_port;
- spin_lock_irq(&port->lock);
- memcpy(&cnow, &port->icount, sizeof(struct uart_icount));
- spin_unlock_irq(&port->lock);
+ spin_lock_irq(&uport->lock);
+ memcpy(&cnow, &uport->icount, sizeof(struct uart_icount));
+ spin_unlock_irq(&uport->lock);
icount.cts = cnow.cts;
icount.dsr = cnow.dsr;
@@ -1093,6 +1101,7 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd,
unsigned long arg)
{
struct uart_state *state = tty->driver_data;
+ struct tty_port *port = &state->port;
void __user *uarg = (void __user *)arg;
int ret = -ENOIOCTLCMD;
@@ -1143,7 +1152,7 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd,
if (ret != -ENOIOCTLCMD)
goto out;
- mutex_lock(&state->mutex);
+ mutex_lock(&port->mutex);
if (tty_hung_up_p(filp)) {
ret = -EIO;
@@ -1160,14 +1169,14 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd,
break;
default: {
- struct uart_port *port = state->port;
- if (port->ops->ioctl)
- ret = port->ops->ioctl(port, cmd, arg);
+ struct uart_port *uport = state->uart_port;
+ if (uport->ops->ioctl)
+ ret = uport->ops->ioctl(uport, cmd, arg);
break;
}
}
out_up:
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
out:
return ret;
}
@@ -1175,10 +1184,10 @@ out:
static void uart_set_ldisc(struct tty_struct *tty)
{
struct uart_state *state = tty->driver_data;
- struct uart_port *port = state->port;
+ struct uart_port *uport = state->uart_port;
- if (port->ops->set_ldisc)
- port->ops->set_ldisc(port);
+ if (uport->ops->set_ldisc)
+ uport->ops->set_ldisc(uport);
}
static void uart_set_termios(struct tty_struct *tty,
@@ -1207,7 +1216,7 @@ static void uart_set_termios(struct tty_struct *tty,
/* Handle transition to B0 status */
if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD))
- uart_clear_mctrl(state->port, TIOCM_RTS | TIOCM_DTR);
+ uart_clear_mctrl(state->uart_port, TIOCM_RTS | TIOCM_DTR);
/* Handle transition away from B0 status */
if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) {
@@ -1215,25 +1224,25 @@ static void uart_set_termios(struct tty_struct *tty,
if (!(cflag & CRTSCTS) ||
!test_bit(TTY_THROTTLED, &tty->flags))
mask |= TIOCM_RTS;
- uart_set_mctrl(state->port, mask);
+ uart_set_mctrl(state->uart_port, mask);
}
/* Handle turning off CRTSCTS */
if ((old_termios->c_cflag & CRTSCTS) && !(cflag & CRTSCTS)) {
- spin_lock_irqsave(&state->port->lock, flags);
+ spin_lock_irqsave(&state->uart_port->lock, flags);
tty->hw_stopped = 0;
__uart_start(tty);
- spin_unlock_irqrestore(&state->port->lock, flags);
+ spin_unlock_irqrestore(&state->uart_port->lock, flags);
}
/* Handle turning on CRTSCTS */
if (!(old_termios->c_cflag & CRTSCTS) && (cflag & CRTSCTS)) {
- spin_lock_irqsave(&state->port->lock, flags);
- if (!(state->port->ops->get_mctrl(state->port) & TIOCM_CTS)) {
+ spin_lock_irqsave(&state->uart_port->lock, flags);
+ if (!(state->uart_port->ops->get_mctrl(state->uart_port) & TIOCM_CTS)) {
tty->hw_stopped = 1;
- state->port->ops->stop_tx(state->port);
+ state->uart_port->ops->stop_tx(state->uart_port);
}
- spin_unlock_irqrestore(&state->port->lock, flags);
+ spin_unlock_irqrestore(&state->uart_port->lock, flags);
}
#if 0
/*
@@ -1244,7 +1253,7 @@ static void uart_set_termios(struct tty_struct *tty,
*/
if (!(old_termios->c_cflag & CLOCAL) &&
(tty->termios->c_cflag & CLOCAL))
- wake_up_interruptible(&info->port.open_wait);
+ wake_up_interruptible(&state->uart_port.open_wait);
#endif
}
@@ -1256,40 +1265,39 @@ static void uart_set_termios(struct tty_struct *tty,
static void uart_close(struct tty_struct *tty, struct file *filp)
{
struct uart_state *state = tty->driver_data;
- struct uart_port *port;
+ struct tty_port *port;
+ struct uart_port *uport;
BUG_ON(!kernel_locked());
- if (!state || !state->port)
- return;
+ uport = state->uart_port;
+ port = &state->port;
- port = state->port;
+ pr_debug("uart_close(%d) called\n", uport->line);
- pr_debug("uart_close(%d) called\n", port->line);
-
- mutex_lock(&state->mutex);
+ mutex_lock(&port->mutex);
if (tty_hung_up_p(filp))
goto done;
- if ((tty->count == 1) && (state->count != 1)) {
+ if ((tty->count == 1) && (port->count != 1)) {
/*
* Uh, oh. tty->count is 1, which means that the tty
- * structure will be freed. state->count should always
+ * structure will be freed. port->count should always
* be one in these conditions. If it's greater than
* one, we've got real problems, since it means the
* serial port won't be shutdown.
*/
printk(KERN_ERR "uart_close: bad serial port count; tty->count is 1, "
- "state->count is %d\n", state->count);
- state->count = 1;
+ "port->count is %d\n", port->count);
+ port->count = 1;
}
- if (--state->count < 0) {
+ if (--port->count < 0) {
printk(KERN_ERR "uart_close: bad serial port count for %s: %d\n",
- tty->name, state->count);
- state->count = 0;
+ tty->name, port->count);
+ port->count = 0;
}
- if (state->count)
+ if (port->count)
goto done;
/*
@@ -1299,24 +1307,24 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
*/
tty->closing = 1;
- if (state->closing_wait != USF_CLOSING_WAIT_NONE)
- tty_wait_until_sent(tty, msecs_to_jiffies(state->closing_wait));
+ if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
+ tty_wait_until_sent(tty, msecs_to_jiffies(port->closing_wait));
/*
* At this point, we stop accepting input. To do this, we
* disable the receive line status interrupts.
*/
- if (state->info.flags & UIF_INITIALIZED) {
+ if (port->flags & ASYNC_INITIALIZED) {
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
- port->ops->stop_rx(port);
+ uport->ops->stop_rx(uport);
spin_unlock_irqrestore(&port->lock, flags);
/*
* Before we drop DTR, make sure the UART transmitter
* has completely drained; this is especially
* important if there is a transmit FIFO!
*/
- uart_wait_until_sent(tty, port->timeout);
+ uart_wait_until_sent(tty, uport->timeout);
}
uart_shutdown(state);
@@ -1325,29 +1333,29 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
tty_ldisc_flush(tty);
tty->closing = 0;
- state->info.port.tty = NULL;
+ tty_port_tty_set(port, NULL);
- if (state->info.port.blocked_open) {
- if (state->close_delay)
- msleep_interruptible(state->close_delay);
- } else if (!uart_console(port)) {
+ if (port->blocked_open) {
+ if (port->close_delay)
+ msleep_interruptible(port->close_delay);
+ } else if (!uart_console(uport)) {
uart_change_pm(state, 3);
}
/*
* Wake up anyone trying to open this port.
*/
- state->info.flags &= ~UIF_NORMAL_ACTIVE;
- wake_up_interruptible(&state->info.port.open_wait);
+ clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
+ wake_up_interruptible(&port->open_wait);
- done:
- mutex_unlock(&state->mutex);
+done:
+ mutex_unlock(&port->mutex);
}
static void uart_wait_until_sent(struct tty_struct *tty, int timeout)
{
struct uart_state *state = tty->driver_data;
- struct uart_port *port = state->port;
+ struct uart_port *port = state->uart_port;
unsigned long char_time, expire;
if (port->type == PORT_UNKNOWN || port->fifosize == 0)
@@ -1412,22 +1420,22 @@ static void uart_wait_until_sent(struct tty_struct *tty, int timeout)
static void uart_hangup(struct tty_struct *tty)
{
struct uart_state *state = tty->driver_data;
- struct uart_info *info = &state->info;
+ struct tty_port *port = &state->port;
BUG_ON(!kernel_locked());
- pr_debug("uart_hangup(%d)\n", state->port->line);
+ pr_debug("uart_hangup(%d)\n", state->uart_port->line);
- mutex_lock(&state->mutex);
- if (info->flags & UIF_NORMAL_ACTIVE) {
+ mutex_lock(&port->mutex);
+ if (port->flags & ASYNC_NORMAL_ACTIVE) {
uart_flush_buffer(tty);
uart_shutdown(state);
- state->count = 0;
- info->flags &= ~UIF_NORMAL_ACTIVE;
- info->port.tty = NULL;
- wake_up_interruptible(&info->port.open_wait);
- wake_up_interruptible(&info->delta_msr_wait);
+ port->count = 0;
+ clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
+ tty_port_tty_set(port, NULL);
+ wake_up_interruptible(&port->open_wait);
+ wake_up_interruptible(&port->delta_msr_wait);
}
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
}
/*
@@ -1438,8 +1446,8 @@ static void uart_hangup(struct tty_struct *tty)
*/
static void uart_update_termios(struct uart_state *state)
{
- struct tty_struct *tty = state->info.port.tty;
- struct uart_port *port = state->port;
+ struct tty_struct *tty = state->port.tty;
+ struct uart_port *port = state->uart_port;
if (uart_console(port) && port->cons->cflag) {
tty->termios->c_cflag = port->cons->cflag;
@@ -1473,27 +1481,27 @@ static int
uart_block_til_ready(struct file *filp, struct uart_state *state)
{
DECLARE_WAITQUEUE(wait, current);
- struct uart_info *info = &state->info;
- struct uart_port *port = state->port;
+ struct uart_port *uport = state->uart_port;
+ struct tty_port *port = &state->port;
unsigned int mctrl;
- info->port.blocked_open++;
- state->count--;
+ port->blocked_open++;
+ port->count--;
- add_wait_queue(&info->port.open_wait, &wait);
+ add_wait_queue(&port->open_wait, &wait);
while (1) {
set_current_state(TASK_INTERRUPTIBLE);
/*
* If we have been hung up, tell userspace/restart open.
*/
- if (tty_hung_up_p(filp) || info->port.tty == NULL)
+ if (tty_hung_up_p(filp) || port->tty == NULL)
break;
/*
* If the port has been closed, tell userspace/restart open.
*/
- if (!(info->flags & UIF_INITIALIZED))
+ if (!(port->flags & ASYNC_INITIALIZED))
break;
/*
@@ -1506,8 +1514,8 @@ uart_block_til_ready(struct file *filp, struct uart_state *state)
* have set TTY_IO_ERROR for a non-existant port.
*/
if ((filp->f_flags & O_NONBLOCK) ||
- (info->port.tty->termios->c_cflag & CLOCAL) ||
- (info->port.tty->flags & (1 << TTY_IO_ERROR)))
+ (port->tty->termios->c_cflag & CLOCAL) ||
+ (port->tty->flags & (1 << TTY_IO_ERROR)))
break;
/*
@@ -1515,37 +1523,37 @@ uart_block_til_ready(struct file *filp, struct uart_state *state)
* not set RTS here - we want to make sure we catch
* the data from the modem.
*/
- if (info->port.tty->termios->c_cflag & CBAUD)
- uart_set_mctrl(port, TIOCM_DTR);
+ if (port->tty->termios->c_cflag & CBAUD)
+ uart_set_mctrl(uport, TIOCM_DTR);
/*
* and wait for the carrier to indicate that the
* modem is ready for us.
*/
- spin_lock_irq(&port->lock);
- port->ops->enable_ms(port);
- mctrl = port->ops->get_mctrl(port);
- spin_unlock_irq(&port->lock);
+ spin_lock_irq(&uport->lock);
+ uport->ops->enable_ms(uport);
+ mctrl = uport->ops->get_mctrl(uport);
+ spin_unlock_irq(&uport->lock);
if (mctrl & TIOCM_CAR)
break;
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
schedule();
- mutex_lock(&state->mutex);
+ mutex_lock(&port->mutex);
if (signal_pending(current))
break;
}
set_current_state(TASK_RUNNING);
- remove_wait_queue(&info->port.open_wait, &wait);
+ remove_wait_queue(&port->open_wait, &wait);
- state->count++;
- info->port.blocked_open--;
+ port->count++;
+ port->blocked_open--;
if (signal_pending(current))
return -ERESTARTSYS;
- if (!info->port.tty || tty_hung_up_p(filp))
+ if (!port->tty || tty_hung_up_p(filp))
return -EAGAIN;
return 0;
@@ -1554,24 +1562,26 @@ uart_block_til_ready(struct file *filp, struct uart_state *state)
static struct uart_state *uart_get(struct uart_driver *drv, int line)
{
struct uart_state *state;
+ struct tty_port *port;
int ret = 0;
state = drv->state + line;
- if (mutex_lock_interruptible(&state->mutex)) {
+ port = &state->port;
+ if (mutex_lock_interruptible(&port->mutex)) {
ret = -ERESTARTSYS;
goto err;
}
- state->count++;
- if (!state->port || state->port->flags & UPF_DEAD) {
+ port->count++;
+ if (!state->uart_port || state->uart_port->flags & UPF_DEAD) {
ret = -ENXIO;
goto err_unlock;
}
return state;
err_unlock:
- state->count--;
- mutex_unlock(&state->mutex);
+ port->count--;
+ mutex_unlock(&port->mutex);
err:
return ERR_PTR(ret);
}
@@ -1590,6 +1600,7 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
{
struct uart_driver *drv = (struct uart_driver *)tty->driver->driver_state;
struct uart_state *state;
+ struct tty_port *port;
int retval, line = tty->index;
BUG_ON(!kernel_locked());
@@ -1606,16 +1617,18 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
/*
* We take the semaphore inside uart_get to guarantee that we won't
- * be re-entered while allocating the info structure, or while we
+ * be re-entered while allocating the state structure, or while we
* request any IRQs that the driver may need. This also has the nice
* side-effect that it delays the action of uart_hangup, so we can
- * guarantee that info->port.tty will always contain something reasonable.
+ * guarantee that state->port.tty will always contain something
+ * reasonable.
*/
state = uart_get(drv, line);
if (IS_ERR(state)) {
retval = PTR_ERR(state);
goto fail;
}
+ port = &state->port;
/*
* Once we set tty->driver_data here, we are guaranteed that
@@ -1623,25 +1636,25 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
* Any failures from here onwards should not touch the count.
*/
tty->driver_data = state;
- state->port->info = &state->info;
- tty->low_latency = (state->port->flags & UPF_LOW_LATENCY) ? 1 : 0;
+ state->uart_port->state = state;
+ tty->low_latency = (state->uart_port->flags & UPF_LOW_LATENCY) ? 1 : 0;
tty->alt_speed = 0;
- state->info.port.tty = tty;
+ tty_port_tty_set(port, tty);
/*
* If the port is in the middle of closing, bail out now.
*/
if (tty_hung_up_p(filp)) {
retval = -EAGAIN;
- state->count--;
- mutex_unlock(&state->mutex);
+ port->count--;
+ mutex_unlock(&port->mutex);
goto fail;
}
/*
* Make sure the device is in D0 state.
*/
- if (state->count == 1)
+ if (port->count == 1)
uart_change_pm(state, 0);
/*
@@ -1654,18 +1667,18 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
*/
if (retval == 0)
retval = uart_block_til_ready(filp, state);
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
/*
* If this is the first open to succeed, adjust things to suit.
*/
- if (retval == 0 && !(state->info.flags & UIF_NORMAL_ACTIVE)) {
- state->info.flags |= UIF_NORMAL_ACTIVE;
+ if (retval == 0 && !(port->flags & ASYNC_NORMAL_ACTIVE)) {
+ set_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
uart_update_termios(state);
}
- fail:
+fail:
return retval;
}
@@ -1687,57 +1700,58 @@ static const char *uart_type(struct uart_port *port)
static void uart_line_info(struct seq_file *m, struct uart_driver *drv, int i)
{
struct uart_state *state = drv->state + i;
+ struct tty_port *port = &state->port;
int pm_state;
- struct uart_port *port = state->port;
+ struct uart_port *uport = state->uart_port;
char stat_buf[32];
unsigned int status;
int mmio;
- if (!port)
+ if (!uport)
return;
- mmio = port->iotype >= UPIO_MEM;
+ mmio = uport->iotype >= UPIO_MEM;
seq_printf(m, "%d: uart:%s %s%08llX irq:%d",
- port->line, uart_type(port),
+ uport->line, uart_type(uport),
mmio ? "mmio:0x" : "port:",
- mmio ? (unsigned long long)port->mapbase
- : (unsigned long long) port->iobase,
- port->irq);
+ mmio ? (unsigned long long)uport->mapbase
+ : (unsigned long long)uport->iobase,
+ uport->irq);
- if (port->type == PORT_UNKNOWN) {
+ if (uport->type == PORT_UNKNOWN) {
seq_putc(m, '\n');
return;
}
if (capable(CAP_SYS_ADMIN)) {
- mutex_lock(&state->mutex);
+ mutex_lock(&port->mutex);
pm_state = state->pm_state;
if (pm_state)
uart_change_pm(state, 0);
- spin_lock_irq(&port->lock);
- status = port->ops->get_mctrl(port);
- spin_unlock_irq(&port->lock);
+ spin_lock_irq(&uport->lock);
+ status = uport->ops->get_mctrl(uport);
+ spin_unlock_irq(&uport->lock);
if (pm_state)
uart_change_pm(state, pm_state);
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
seq_printf(m, " tx:%d rx:%d",
- port->icount.tx, port->icount.rx);
- if (port->icount.frame)
+ uport->icount.tx, uport->icount.rx);
+ if (uport->icount.frame)
seq_printf(m, " fe:%d",
- port->icount.frame);
- if (port->icount.parity)
+ uport->icount.frame);
+ if (uport->icount.parity)
seq_printf(m, " pe:%d",
- port->icount.parity);
- if (port->icount.brk)
+ uport->icount.parity);
+ if (uport->icount.brk)
seq_printf(m, " brk:%d",
- port->icount.brk);
- if (port->icount.overrun)
+ uport->icount.brk);
+ if (uport->icount.overrun)
seq_printf(m, " oe:%d",
- port->icount.overrun);
+ uport->icount.overrun);
#define INFOBIT(bit, str) \
- if (port->mctrl & (bit)) \
+ if (uport->mctrl & (bit)) \
strncat(stat_buf, (str), sizeof(stat_buf) - \
strlen(stat_buf) - 2)
#define STATBIT(bit, str) \
@@ -1958,7 +1972,7 @@ EXPORT_SYMBOL_GPL(uart_set_options);
static void uart_change_pm(struct uart_state *state, int pm_state)
{
- struct uart_port *port = state->port;
+ struct uart_port *port = state->uart_port;
if (state->pm_state != pm_state) {
if (port->ops->pm)
@@ -1982,132 +1996,138 @@ static int serial_match_port(struct device *dev, void *data)
return dev->devt == devt; /* Actually, only one tty per port */
}
-int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
+int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
{
- struct uart_state *state = drv->state + port->line;
+ struct uart_state *state = drv->state + uport->line;
+ struct tty_port *port = &state->port;
struct device *tty_dev;
- struct uart_match match = {port, drv};
+ struct uart_match match = {uport, drv};
- mutex_lock(&state->mutex);
+ mutex_lock(&port->mutex);
- if (!console_suspend_enabled && uart_console(port)) {
+ if (!console_suspend_enabled && uart_console(uport)) {
/* we're going to avoid suspending serial console */
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
return 0;
}
- tty_dev = device_find_child(port->dev, &match, serial_match_port);
+ tty_dev = device_find_child(uport->dev, &match, serial_match_port);
if (device_may_wakeup(tty_dev)) {
- enable_irq_wake(port->irq);
+ enable_irq_wake(uport->irq);
put_device(tty_dev);
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
return 0;
}
- port->suspended = 1;
+ uport->suspended = 1;
- if (state->info.flags & UIF_INITIALIZED) {
- const struct uart_ops *ops = port->ops;
+ if (port->flags & ASYNC_INITIALIZED) {
+ const struct uart_ops *ops = uport->ops;
int tries;
- state->info.flags = (state->info.flags & ~UIF_INITIALIZED)
- | UIF_SUSPENDED;
+ set_bit(ASYNCB_SUSPENDED, &port->flags);
+ clear_bit(ASYNCB_INITIALIZED, &port->flags);
- spin_lock_irq(&port->lock);
- ops->stop_tx(port);
- ops->set_mctrl(port, 0);
- ops->stop_rx(port);
- spin_unlock_irq(&port->lock);
+ spin_lock_irq(&uport->lock);
+ ops->stop_tx(uport);
+ ops->set_mctrl(uport, 0);
+ ops->stop_rx(uport);
+ spin_unlock_irq(&uport->lock);
/*
* Wait for the transmitter to empty.
*/
- for (tries = 3; !ops->tx_empty(port) && tries; tries--)
+ for (tries = 3; !ops->tx_empty(uport) && tries; tries--)
msleep(10);
if (!tries)
printk(KERN_ERR "%s%s%s%d: Unable to drain "
"transmitter\n",
- port->dev ? dev_name(port->dev) : "",
- port->dev ? ": " : "",
+ uport->dev ? dev_name(uport->dev) : "",
+ uport->dev ? ": " : "",
drv->dev_name,
- drv->tty_driver->name_base + port->line);
+ drv->tty_driver->name_base + uport->line);
- ops->shutdown(port);
+ ops->shutdown(uport);
}
/*
* Disable the console device before suspending.
*/
- if (uart_console(port))
- console_stop(port->cons);
+ if (uart_console(uport))
+ console_stop(uport->cons);
uart_change_pm(state, 3);
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
return 0;
}
-int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
+int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
{
- struct uart_state *state = drv->state + port->line;
+ struct uart_state *state = drv->state + uport->line;
+ struct tty_port *port = &state->port;
struct device *tty_dev;
- struct uart_match match = {port, drv};
+ struct uart_match match = {uport, drv};
+ struct ktermios termios;
- mutex_lock(&state->mutex);
+ mutex_lock(&port->mutex);
- if (!console_suspend_enabled && uart_console(port)) {
+ if (!console_suspend_enabled && uart_console(uport)) {
/* no need to resume serial console, it wasn't suspended */
- mutex_unlock(&state->mutex);
+ /*
+ * First try to use the console cflag setting.
+ */
+ memset(&termios, 0, sizeof(struct ktermios));
+ termios.c_cflag = uport->cons->cflag;
+ /*
+ * If that's unset, use the tty termios setting.
+ */
+ if (termios.c_cflag == 0)
+ termios = *state->port.tty->termios;
+ else {
+ termios.c_ispeed = termios.c_ospeed =
+ tty_termios_input_baud_rate(&termios);
+ termios.c_ispeed = termios.c_ospeed =
+ tty_termios_baud_rate(&termios);
+ }
+ uport->ops->set_termios(uport, &termios, NULL);
+ mutex_unlock(&port->mutex);
return 0;
}
- tty_dev = device_find_child(port->dev, &match, serial_match_port);
- if (!port->suspended && device_may_wakeup(tty_dev)) {
- disable_irq_wake(port->irq);
- mutex_unlock(&state->mutex);
+ tty_dev = device_find_child(uport->dev, &match, serial_match_port);
+ if (!uport->suspended && device_may_wakeup(tty_dev)) {
+ disable_irq_wake(uport->irq);
+ mutex_unlock(&port->mutex);
return 0;
}
- port->suspended = 0;
+ uport->suspended = 0;
/*
* Re-enable the console device after suspending.
*/
- if (uart_console(port)) {
- struct ktermios termios;
-
- /*
- * First try to use the console cflag setting.
- */
- memset(&termios, 0, sizeof(struct ktermios));
- termios.c_cflag = port->cons->cflag;
-
- /*
- * If that's unset, use the tty termios setting.
- */
- if (state->info.port.tty && termios.c_cflag == 0)
- termios = *state->info.port.tty->termios;
-
+ if (uart_console(uport)) {
uart_change_pm(state, 0);
- port->ops->set_termios(port, &termios, NULL);
- console_start(port->cons);
+ uport->ops->set_termios(uport, &termios, NULL);
+ console_start(uport->cons);
}
- if (state->info.flags & UIF_SUSPENDED) {
- const struct uart_ops *ops = port->ops;
+ if (port->flags & ASYNC_SUSPENDED) {
+ const struct uart_ops *ops = uport->ops;
int ret;
uart_change_pm(state, 0);
- spin_lock_irq(&port->lock);
- ops->set_mctrl(port, 0);
- spin_unlock_irq(&port->lock);
- ret = ops->startup(port);
+ spin_lock_irq(&uport->lock);
+ ops->set_mctrl(uport, 0);
+ spin_unlock_irq(&uport->lock);
+ ret = ops->startup(uport);
if (ret == 0) {
uart_change_speed(state, NULL);
- spin_lock_irq(&port->lock);
- ops->set_mctrl(port, port->mctrl);
- ops->start_tx(port);
- spin_unlock_irq(&port->lock);
- state->info.flags |= UIF_INITIALIZED;
+ spin_lock_irq(&uport->lock);
+ ops->set_mctrl(uport, uport->mctrl);
+ ops->start_tx(uport);
+ spin_unlock_irq(&uport->lock);
+ set_bit(ASYNCB_INITIALIZED, &port->flags);
} else {
/*
* Failed to resume - maybe hardware went away?
@@ -2117,10 +2137,10 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
uart_shutdown(state);
}
- state->info.flags &= ~UIF_SUSPENDED;
+ clear_bit(ASYNCB_SUSPENDED, &port->flags);
}
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
return 0;
}
@@ -2232,10 +2252,10 @@ static int uart_poll_init(struct tty_driver *driver, int line, char *options)
int parity = 'n';
int flow = 'n';
- if (!state || !state->port)
+ if (!state || !state->uart_port)
return -1;
- port = state->port;
+ port = state->uart_port;
if (!(port->ops->poll_get_char && port->ops->poll_put_char))
return -1;
@@ -2253,10 +2273,10 @@ static int uart_poll_get_char(struct tty_driver *driver, int line)
struct uart_state *state = drv->state + line;
struct uart_port *port;
- if (!state || !state->port)
+ if (!state || !state->uart_port)
return -1;
- port = state->port;
+ port = state->uart_port;
return port->ops->poll_get_char(port);
}
@@ -2266,10 +2286,10 @@ static void uart_poll_put_char(struct tty_driver *driver, int line, char ch)
struct uart_state *state = drv->state + line;
struct uart_port *port;
- if (!state || !state->port)
+ if (!state || !state->uart_port)
return;
- port = state->port;
+ port = state->uart_port;
port->ops->poll_put_char(port, ch);
}
#endif
@@ -2360,14 +2380,12 @@ int uart_register_driver(struct uart_driver *drv)
*/
for (i = 0; i < drv->nr; i++) {
struct uart_state *state = drv->state + i;
+ struct tty_port *port = &state->port;
- state->close_delay = 500; /* .5 seconds */
- state->closing_wait = 30000; /* 30 seconds */
- mutex_init(&state->mutex);
-
- tty_port_init(&state->info.port);
- init_waitqueue_head(&state->info.delta_msr_wait);
- tasklet_init(&state->info.tlet, uart_tasklet_action,
+ tty_port_init(port);
+ port->close_delay = 500; /* .5 seconds */
+ port->closing_wait = 30000; /* 30 seconds */
+ tasklet_init(&state->tlet, uart_tasklet_action,
(unsigned long)state);
}
@@ -2415,62 +2433,64 @@ struct tty_driver *uart_console_device(struct console *co, int *index)
* level uart drivers to expand uart_port, rather than having yet
* more levels of structures.
*/
-int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
+int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)
{
struct uart_state *state;
+ struct tty_port *port;
int ret = 0;
struct device *tty_dev;
BUG_ON(in_interrupt());
- if (port->line >= drv->nr)
+ if (uport->line >= drv->nr)
return -EINVAL;
- state = drv->state + port->line;
+ state = drv->state + uport->line;
+ port = &state->port;
mutex_lock(&port_mutex);
- mutex_lock(&state->mutex);
- if (state->port) {
+ mutex_lock(&port->mutex);
+ if (state->uart_port) {
ret = -EINVAL;
goto out;
}
- state->port = port;
+ state->uart_port = uport;
state->pm_state = -1;
- port->cons = drv->cons;
- port->info = &state->info;
+ uport->cons = drv->cons;
+ uport->state = state;
/*
* If this port is a console, then the spinlock is already
* initialised.
*/
- if (!(uart_console(port) && (port->cons->flags & CON_ENABLED))) {
- spin_lock_init(&port->lock);
- lockdep_set_class(&port->lock, &port_lock_key);
+ if (!(uart_console(uport) && (uport->cons->flags & CON_ENABLED))) {
+ spin_lock_init(&uport->lock);
+ lockdep_set_class(&uport->lock, &port_lock_key);
}
- uart_configure_port(drv, state, port);
+ uart_configure_port(drv, state, uport);
/*
* Register the port whether it's detected or not. This allows
* setserial to be used to alter this ports parameters.
*/
- tty_dev = tty_register_device(drv->tty_driver, port->line, port->dev);
+ tty_dev = tty_register_device(drv->tty_driver, uport->line, uport->dev);
if (likely(!IS_ERR(tty_dev))) {
device_init_wakeup(tty_dev, 1);
device_set_wakeup_enable(tty_dev, 0);
} else
printk(KERN_ERR "Cannot register tty device on line %d\n",
- port->line);
+ uport->line);
/*
* Ensure UPF_DEAD is not set.
*/
- port->flags &= ~UPF_DEAD;
+ uport->flags &= ~UPF_DEAD;
out:
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
mutex_unlock(&port_mutex);
return ret;
@@ -2485,16 +2505,16 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
* core driver. No further calls will be made to the low-level code
* for this port.
*/
-int uart_remove_one_port(struct uart_driver *drv, struct uart_port *port)
+int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport)
{
- struct uart_state *state = drv->state + port->line;
- struct uart_info *info;
+ struct uart_state *state = drv->state + uport->line;
+ struct tty_port *port = &state->port;
BUG_ON(in_interrupt());
- if (state->port != port)
+ if (state->uart_port != uport)
printk(KERN_ALERT "Removing wrong port: %p != %p\n",
- state->port, port);
+ state->uart_port, uport);
mutex_lock(&port_mutex);
@@ -2502,37 +2522,35 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *port)
* Mark the port "dead" - this prevents any opens from
* succeeding while we shut down the port.
*/
- mutex_lock(&state->mutex);
- port->flags |= UPF_DEAD;
- mutex_unlock(&state->mutex);
+ mutex_lock(&port->mutex);
+ uport->flags |= UPF_DEAD;
+ mutex_unlock(&port->mutex);
/*
* Remove the devices from the tty layer
*/
- tty_unregister_device(drv->tty_driver, port->line);
+ tty_unregister_device(drv->tty_driver, uport->line);
- info = &state->info;
- if (info && info->port.tty)
- tty_vhangup(info->port.tty);
+ if (port->tty)
+ tty_vhangup(port->tty);
/*
* Free the port IO and memory resources, if any.
*/
- if (port->type != PORT_UNKNOWN)
- port->ops->release_port(port);
+ if (uport->type != PORT_UNKNOWN)
+ uport->ops->release_port(uport);
/*
* Indicate that there isn't a port here anymore.
*/
- port->type = PORT_UNKNOWN;
+ uport->type = PORT_UNKNOWN;
/*
* Kill the tasklet, and free resources.
*/
- if (info)
- tasklet_kill(&info->tlet);
+ tasklet_kill(&state->tlet);
- state->port = NULL;
+ state->uart_port = NULL;
mutex_unlock(&port_mutex);
return 0;
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index ed4648b556c..a3bb49031a7 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -884,6 +884,7 @@ static struct pcmcia_device_id serial_ids[] = {
PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"),
+ PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "COMpad2.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "COMpad4.cis"),
PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "COMpad2.cis"),
PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"),
diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c
index 52db5cc3f90..2e71bbc04da 100644
--- a/drivers/serial/serial_ks8695.c
+++ b/drivers/serial/serial_ks8695.c
@@ -154,7 +154,7 @@ static void ks8695uart_disable_ms(struct uart_port *port)
static irqreturn_t ks8695uart_rx_chars(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
- struct tty_struct *tty = port->info->port.tty;
+ struct tty_struct *tty = port->state->port.tty;
unsigned int status, ch, lsr, flg, max_count = 256;
status = UART_GET_LSR(port); /* clears pending LSR interrupts */
@@ -210,7 +210,7 @@ ignore_char:
static irqreturn_t ks8695uart_tx_chars(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
- struct circ_buf *xmit = &port->info->xmit;
+ struct circ_buf *xmit = &port->state->xmit;
unsigned int count;
if (port->x_char) {
@@ -266,7 +266,7 @@ static irqreturn_t ks8695uart_modem_status(int irq, void *dev_id)
if (status & URMS_URTERI)
port->icount.rng++;
- wake_up_interruptible(&port->info->delta_msr_wait);
+ wake_up_interruptible(&port->state->port.delta_msr_wait);
return IRQ_HANDLED;
}
diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c
index a7bf024a828..ea744707c4d 100644
--- a/drivers/serial/serial_lh7a40x.c
+++ b/drivers/serial/serial_lh7a40x.c
@@ -138,7 +138,7 @@ static void lh7a40xuart_enable_ms (struct uart_port* port)
static void lh7a40xuart_rx_chars (struct uart_port* port)
{
- struct tty_struct* tty = port->info->port.tty;
+ struct tty_struct* tty = port->state->port.tty;
int cbRxMax = 256; /* (Gross) limit on receive */
unsigned int data; /* Received data and status */
unsigned int flag;
@@ -184,7 +184,7 @@ static void lh7a40xuart_rx_chars (struct uart_port* port)
static void lh7a40xuart_tx_chars (struct uart_port* port)
{
- struct circ_buf* xmit = &port->info->xmit;
+ struct circ_buf* xmit = &port->state->xmit;
int cbTxMax = port->fifosize;
if (port->x_char) {
@@ -241,7 +241,7 @@ static void lh7a40xuart_modem_status (struct uart_port* port)
if (delta & CTS)
uart_handle_cts_change (port, status & CTS);
- wake_up_interruptible (&port->info->delta_msr_wait);
+ wake_up_interruptible (&port->state->port.delta_msr_wait);
}
static irqreturn_t lh7a40xuart_int (int irq, void* dev_id)
diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c
index 54dd16d66a4..0f7cf4c453e 100644
--- a/drivers/serial/serial_txx9.c
+++ b/drivers/serial/serial_txx9.c
@@ -272,7 +272,7 @@ static void serial_txx9_initialize(struct uart_port *port)
static inline void
receive_chars(struct uart_txx9_port *up, unsigned int *status)
{
- struct tty_struct *tty = up->port.info->port.tty;
+ struct tty_struct *tty = up->port.state->port.tty;
unsigned char ch;
unsigned int disr = *status;
int max_count = 256;
@@ -348,7 +348,7 @@ receive_chars(struct uart_txx9_port *up, unsigned int *status)
static inline void transmit_chars(struct uart_txx9_port *up)
{
- struct circ_buf *xmit = &up->port.info->xmit;
+ struct circ_buf *xmit = &up->port.state->xmit;
int count;
if (up->port.x_char) {
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 32dc2fc50e6..85119fb7cb5 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -361,7 +361,7 @@ static inline int sci_rxroom(struct uart_port *port)
static void sci_transmit_chars(struct uart_port *port)
{
- struct circ_buf *xmit = &port->info->xmit;
+ struct circ_buf *xmit = &port->state->xmit;
unsigned int stopped = uart_tx_stopped(port);
unsigned short status;
unsigned short ctrl;
@@ -426,7 +426,7 @@ static void sci_transmit_chars(struct uart_port *port)
static inline void sci_receive_chars(struct uart_port *port)
{
struct sci_port *sci_port = to_sci_port(port);
- struct tty_struct *tty = port->info->port.tty;
+ struct tty_struct *tty = port->state->port.tty;
int i, count, copied = 0;
unsigned short status;
unsigned char flag;
@@ -546,7 +546,7 @@ static inline int sci_handle_errors(struct uart_port *port)
{
int copied = 0;
unsigned short status = sci_in(port, SCxSR);
- struct tty_struct *tty = port->info->port.tty;
+ struct tty_struct *tty = port->state->port.tty;
if (status & SCxSR_ORER(port)) {
/* overrun error */
@@ -600,7 +600,7 @@ static inline int sci_handle_errors(struct uart_port *port)
static inline int sci_handle_fifo_overrun(struct uart_port *port)
{
- struct tty_struct *tty = port->info->port.tty;
+ struct tty_struct *tty = port->state->port.tty;
int copied = 0;
if (port->type != PORT_SCIF)
@@ -623,7 +623,7 @@ static inline int sci_handle_breaks(struct uart_port *port)
{
int copied = 0;
unsigned short status = sci_in(port, SCxSR);
- struct tty_struct *tty = port->info->port.tty;
+ struct tty_struct *tty = port->state->port.tty;
struct sci_port *s = to_sci_port(port);
if (uart_handle_break(port))
diff --git a/drivers/serial/sn_console.c b/drivers/serial/sn_console.c
index d5276c012f7..9794e0cd3dc 100644
--- a/drivers/serial/sn_console.c
+++ b/drivers/serial/sn_console.c
@@ -469,9 +469,9 @@ sn_receive_chars(struct sn_cons_port *port, unsigned long flags)
return;
}
- if (port->sc_port.info) {
+ if (port->sc_port.state) {
/* The serial_core stuffs are initilized, use them */
- tty = port->sc_port.info->port.tty;
+ tty = port->sc_port.state->port.tty;
}
else {
/* Not registered yet - can't pass to tty layer. */
@@ -550,9 +550,9 @@ static void sn_transmit_chars(struct sn_cons_port *port, int raw)
BUG_ON(!port->sc_is_asynch);
- if (port->sc_port.info) {
+ if (port->sc_port.state) {
/* We're initilized, using serial core infrastructure */
- xmit = &port->sc_port.info->xmit;
+ xmit = &port->sc_port.state->xmit;
} else {
/* Probably sn_sal_switch_to_asynch has been run but serial core isn't
* initilized yet. Just return. Writes are going through
@@ -927,7 +927,7 @@ sn_sal_console_write(struct console *co, const char *s, unsigned count)
/* We can't look at the xmit buffer if we're not registered with serial core
* yet. So only do the fancy recovery after registering
*/
- if (!port->sc_port.info) {
+ if (!port->sc_port.state) {
/* Not yet registered with serial core - simple case */
puts_raw_fixed(port->sc_ops->sal_puts_raw, s, count);
return;
@@ -936,8 +936,8 @@ sn_sal_console_write(struct console *co, const char *s, unsigned count)
/* somebody really wants this output, might be an
* oops, kdb, panic, etc. make sure they get it. */
if (spin_is_locked(&port->sc_port.lock)) {
- int lhead = port->sc_port.info->xmit.head;
- int ltail = port->sc_port.info->xmit.tail;
+ int lhead = port->sc_port.state->xmit.head;
+ int ltail = port->sc_port.state->xmit.tail;
int counter, got_lock = 0;
/*
@@ -962,13 +962,13 @@ sn_sal_console_write(struct console *co, const char *s, unsigned count)
break;
} else {
/* still locked */
- if ((lhead != port->sc_port.info->xmit.head)
+ if ((lhead != port->sc_port.state->xmit.head)
|| (ltail !=
- port->sc_port.info->xmit.tail)) {
+ port->sc_port.state->xmit.tail)) {
lhead =
- port->sc_port.info->xmit.head;
+ port->sc_port.state->xmit.head;
ltail =
- port->sc_port.info->xmit.tail;
+ port->sc_port.state->xmit.tail;
counter = 0;
}
}
diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c
index 1df5325faab..d548652dee5 100644
--- a/drivers/serial/sunhv.c
+++ b/drivers/serial/sunhv.c
@@ -184,8 +184,8 @@ static struct tty_struct *receive_chars(struct uart_port *port)
{
struct tty_struct *tty = NULL;
- if (port->info != NULL) /* Unopened serial console */
- tty = port->info->port.tty;
+ if (port->state != NULL) /* Unopened serial console */
+ tty = port->state->port.tty;
if (sunhv_ops->receive_chars(port, tty))
sun_do_break();
@@ -197,10 +197,10 @@ static void transmit_chars(struct uart_port *port)
{
struct circ_buf *xmit;
- if (!port->info)
+ if (!port->state)
return;
- xmit = &port->info->xmit;
+ xmit = &port->state->xmit;
if (uart_circ_empty(xmit) || uart_tx_stopped(port))
return;
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index 0355efe115d..d1ad3412863 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -117,8 +117,8 @@ receive_chars(struct uart_sunsab_port *up,
int count = 0;
int i;
- if (up->port.info != NULL) /* Unopened serial console */
- tty = up->port.info->port.tty;
+ if (up->port.state != NULL) /* Unopened serial console */
+ tty = up->port.state->port.tty;
/* Read number of BYTES (Character + Status) available. */
if (stat->sreg.isr0 & SAB82532_ISR0_RPF) {
@@ -229,7 +229,7 @@ static void sunsab_tx_idle(struct uart_sunsab_port *);
static void transmit_chars(struct uart_sunsab_port *up,
union sab82532_irq_status *stat)
{
- struct circ_buf *xmit = &up->port.info->xmit;
+ struct circ_buf *xmit = &up->port.state->xmit;
int i;
if (stat->sreg.isr1 & SAB82532_ISR1_ALLS) {
@@ -297,7 +297,7 @@ static void check_status(struct uart_sunsab_port *up,
up->port.icount.dsr++;
}
- wake_up_interruptible(&up->port.info->delta_msr_wait);
+ wake_up_interruptible(&up->port.state->port.delta_msr_wait);
}
static irqreturn_t sunsab_interrupt(int irq, void *dev_id)
@@ -429,7 +429,7 @@ static void sunsab_tx_idle(struct uart_sunsab_port *up)
static void sunsab_start_tx(struct uart_port *port)
{
struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
- struct circ_buf *xmit = &up->port.info->xmit;
+ struct circ_buf *xmit = &up->port.state->xmit;
int i;
up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR);
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 47c6837850b..68d262b1574 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -311,7 +311,7 @@ static void sunsu_enable_ms(struct uart_port *port)
static struct tty_struct *
receive_chars(struct uart_sunsu_port *up, unsigned char *status)
{
- struct tty_struct *tty = up->port.info->port.tty;
+ struct tty_struct *tty = up->port.state->port.tty;
unsigned char ch, flag;
int max_count = 256;
int saw_console_brk = 0;
@@ -389,7 +389,7 @@ receive_chars(struct uart_sunsu_port *up, unsigned char *status)
static void transmit_chars(struct uart_sunsu_port *up)
{
- struct circ_buf *xmit = &up->port.info->xmit;
+ struct circ_buf *xmit = &up->port.state->xmit;
int count;
if (up->port.x_char) {
@@ -441,7 +441,7 @@ static void check_modem_status(struct uart_sunsu_port *up)
if (status & UART_MSR_DCTS)
uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
- wake_up_interruptible(&up->port.info->delta_msr_wait);
+ wake_up_interruptible(&up->port.state->port.delta_msr_wait);
}
static irqreturn_t sunsu_serial_interrupt(int irq, void *dev_id)
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index e09d3cebb4f..ef693ae22e7 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -328,9 +328,9 @@ sunzilog_receive_chars(struct uart_sunzilog_port *up,
unsigned char ch, r1, flag;
tty = NULL;
- if (up->port.info != NULL && /* Unopened serial console */
- up->port.info->port.tty != NULL) /* Keyboard || mouse */
- tty = up->port.info->port.tty;
+ if (up->port.state != NULL && /* Unopened serial console */
+ up->port.state->port.tty != NULL) /* Keyboard || mouse */
+ tty = up->port.state->port.tty;
for (;;) {
@@ -451,7 +451,7 @@ static void sunzilog_status_handle(struct uart_sunzilog_port *up,
uart_handle_cts_change(&up->port,
(status & CTS));
- wake_up_interruptible(&up->port.info->delta_msr_wait);
+ wake_up_interruptible(&up->port.state->port.delta_msr_wait);
}
up->prev_status = status;
@@ -501,9 +501,9 @@ static void sunzilog_transmit_chars(struct uart_sunzilog_port *up,
return;
}
- if (up->port.info == NULL)
+ if (up->port.state == NULL)
goto ack_tx_int;
- xmit = &up->port.info->xmit;
+ xmit = &up->port.state->xmit;
if (uart_circ_empty(xmit))
goto ack_tx_int;
@@ -705,7 +705,7 @@ static void sunzilog_start_tx(struct uart_port *port)
port->icount.tx++;
port->x_char = 0;
} else {
- struct circ_buf *xmit = &port->info->xmit;
+ struct circ_buf *xmit = &port->state->xmit;
writeb(xmit->buf[xmit->tail], &channel->data);
ZSDELAY();
diff --git a/drivers/serial/timbuart.c b/drivers/serial/timbuart.c
index 063a313b755..34b31da01d0 100644
--- a/drivers/serial/timbuart.c
+++ b/drivers/serial/timbuart.c
@@ -77,7 +77,7 @@ static void timbuart_flush_buffer(struct uart_port *port)
static void timbuart_rx_chars(struct uart_port *port)
{
- struct tty_struct *tty = port->info->port.tty;
+ struct tty_struct *tty = port->state->port.tty;
while (ioread32(port->membase + TIMBUART_ISR) & RXDP) {
u8 ch = ioread8(port->membase + TIMBUART_RXFIFO);
@@ -86,7 +86,7 @@ static void timbuart_rx_chars(struct uart_port *port)
}
spin_unlock(&port->lock);
- tty_flip_buffer_push(port->info->port.tty);
+ tty_flip_buffer_push(port->state->port.tty);
spin_lock(&port->lock);
dev_dbg(port->dev, "%s - total read %d bytes\n",
@@ -95,7 +95,7 @@ static void timbuart_rx_chars(struct uart_port *port)
static void timbuart_tx_chars(struct uart_port *port)
{
- struct circ_buf *xmit = &port->info->xmit;
+ struct circ_buf *xmit = &port->state->xmit;
while (!(ioread32(port->membase + TIMBUART_ISR) & TXBF) &&
!uart_circ_empty(xmit)) {
@@ -118,7 +118,7 @@ static void timbuart_handle_tx_port(struct uart_port *port, u32 isr, u32 *ier)
{
struct timbuart_port *uart =
container_of(port, struct timbuart_port, port);
- struct circ_buf *xmit = &port->info->xmit;
+ struct circ_buf *xmit = &port->state->xmit;
if (uart_circ_empty(xmit) || uart_tx_stopped(port))
return;
@@ -231,7 +231,7 @@ static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier)
iowrite32(CTS_DELTA, port->membase + TIMBUART_ISR);
cts = timbuart_get_mctrl(port);
uart_handle_cts_change(port, cts & TIOCM_CTS);
- wake_up_interruptible(&port->info->delta_msr_wait);
+ wake_up_interruptible(&port->state->port.delta_msr_wait);
}
*ier |= CTS_DELTA;
diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index 3317148a4b9..377f2712289 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -75,7 +75,7 @@ static struct uart_port ulite_ports[ULITE_NR_UARTS];
static int ulite_receive(struct uart_port *port, int stat)
{
- struct tty_struct *tty = port->info->port.tty;
+ struct tty_struct *tty = port->state->port.tty;
unsigned char ch = 0;
char flag = TTY_NORMAL;
@@ -125,7 +125,7 @@ static int ulite_receive(struct uart_port *port, int stat)
static int ulite_transmit(struct uart_port *port, int stat)
{
- struct circ_buf *xmit = &port->info->xmit;
+ struct circ_buf *xmit = &port->state->xmit;
if (stat & ULITE_STATUS_TXFULL)
return 0;
@@ -154,17 +154,22 @@ static int ulite_transmit(struct uart_port *port, int stat)
static irqreturn_t ulite_isr(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
- int busy;
+ int busy, n = 0;
do {
int stat = readb(port->membase + ULITE_STATUS);
busy = ulite_receive(port, stat);
busy |= ulite_transmit(port, stat);
+ n++;
} while (busy);
- tty_flip_buffer_push(port->info->port.tty);
-
- return IRQ_HANDLED;
+ /* work done? */
+ if (n > 1) {
+ tty_flip_buffer_push(port->state->port.tty);
+ return IRQ_HANDLED;
+ } else {
+ return IRQ_NONE;
+ }
}
static unsigned int ulite_tx_empty(struct uart_port *port)
@@ -221,7 +226,7 @@ static int ulite_startup(struct uart_port *port)
int ret;
ret = request_irq(port->irq, ulite_isr,
- IRQF_DISABLED | IRQF_SAMPLE_RANDOM, "uartlite", port);
+ IRQF_SHARED | IRQF_SAMPLE_RANDOM, "uartlite", port);
if (ret)
return ret;
diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c
index e945e780b5c..0c08f286a2e 100644
--- a/drivers/serial/ucc_uart.c
+++ b/drivers/serial/ucc_uart.c
@@ -327,7 +327,7 @@ static int qe_uart_tx_pump(struct uart_qe_port *qe_port)
unsigned char *p;
unsigned int count;
struct uart_port *port = &qe_port->port;
- struct circ_buf *xmit = &port->info->xmit;
+ struct circ_buf *xmit = &port->state->xmit;
bdp = qe_port->rx_cur;
@@ -466,7 +466,7 @@ static void qe_uart_int_rx(struct uart_qe_port *qe_port)
int i;
unsigned char ch, *cp;
struct uart_port *port = &qe_port->port;
- struct tty_struct *tty = port->info->port.tty;
+ struct tty_struct *tty = port->state->port.tty;
struct qe_bd *bdp;
u16 status;
unsigned int flg;
diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c
index dac550e57c2..3beb6ab4fa6 100644
--- a/drivers/serial/vr41xx_siu.c
+++ b/drivers/serial/vr41xx_siu.c
@@ -318,7 +318,7 @@ static inline void receive_chars(struct uart_port *port, uint8_t *status)
char flag;
int max_count = RX_MAX_COUNT;
- tty = port->info->port.tty;
+ tty = port->state->port.tty;
lsr = *status;
do {
@@ -386,7 +386,7 @@ static inline void check_modem_status(struct uart_port *port)
if (msr & UART_MSR_DCTS)
uart_handle_cts_change(port, msr & UART_MSR_CTS);
- wake_up_interruptible(&port->info->delta_msr_wait);
+ wake_up_interruptible(&port->state->port.delta_msr_wait);
}
static inline void transmit_chars(struct uart_port *port)
@@ -394,7 +394,7 @@ static inline void transmit_chars(struct uart_port *port)
struct circ_buf *xmit;
int max_count = TX_MAX_COUNT;
- xmit = &port->info->xmit;
+ xmit = &port->state->xmit;
if (port->x_char) {
siu_write(port, UART_TX, port->x_char);
diff --git a/drivers/serial/zs.c b/drivers/serial/zs.c
index d8c2809b1ab..1a7fd3e7031 100644
--- a/drivers/serial/zs.c
+++ b/drivers/serial/zs.c
@@ -602,12 +602,12 @@ static void zs_receive_chars(struct zs_port *zport)
uart_insert_char(uport, status, Rx_OVR, ch, flag);
}
- tty_flip_buffer_push(uport->info->port.tty);
+ tty_flip_buffer_push(uport->state->port.tty);
}
static void zs_raw_transmit_chars(struct zs_port *zport)
{
- struct circ_buf *xmit = &zport->port.info->xmit;
+ struct circ_buf *xmit = &zport->port.state->xmit;
/* XON/XOFF chars. */
if (zport->port.x_char) {
@@ -686,7 +686,7 @@ static void zs_status_handle(struct zs_port *zport, struct zs_port *zport_a)
uport->icount.rng++;
if (delta)
- wake_up_interruptible(&uport->info->delta_msr_wait);
+ wake_up_interruptible(&uport->state->port.delta_msr_wait);
spin_lock(&scc->zlock);
}
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 2bfc41ece0e..85a1a55815c 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -858,10 +858,7 @@ static void acm_tty_set_termios(struct tty_struct *tty,
if (!ACM_READY(acm))
return;
- /* FIXME: Needs to support the tty_baud interface */
- /* FIXME: Broken on sparc */
- newline.dwDTERate = cpu_to_le32p(acm_tty_speed +
- (termios->c_cflag & CBAUD & ~CBAUDEX) + (termios->c_cflag & CBAUDEX ? 15 : 0));
+ newline.dwDTERate = cpu_to_le32(tty_get_baud_rate(tty));
newline.bCharFormat = termios->c_cflag & CSTOPB ? 2 : 0;
newline.bParityType = termios->c_cflag & PARENB ?
(termios->c_cflag & PARODD ? 1 : 2) +
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index aec61880f36..5d25d3e52bf 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -35,11 +35,6 @@ static struct usb_device_id id_table [] = {
};
MODULE_DEVICE_TABLE(usb, id_table);
-struct ark3116_private {
- spinlock_t lock;
- u8 termios_initialized;
-};
-
static inline void ARK3116_SND(struct usb_serial *serial, int seq,
__u8 request, __u8 requesttype,
__u16 value, __u16 index)
@@ -82,22 +77,11 @@ static inline void ARK3116_RCV_QUIET(struct usb_serial *serial,
static int ark3116_attach(struct usb_serial *serial)
{
char *buf;
- struct ark3116_private *priv;
- int i;
-
- for (i = 0; i < serial->num_ports; ++i) {
- priv = kzalloc(sizeof(struct ark3116_private), GFP_KERNEL);
- if (!priv)
- goto cleanup;
- spin_lock_init(&priv->lock);
-
- usb_set_serial_port_data(serial->port[i], priv);
- }
buf = kmalloc(1, GFP_KERNEL);
if (!buf) {
dbg("error kmalloc -> out of mem?");
- goto cleanup;
+ return -ENOMEM;
}
/* 3 */
@@ -149,13 +133,16 @@ static int ark3116_attach(struct usb_serial *serial)
kfree(buf);
return 0;
+}
-cleanup:
- for (--i; i >= 0; --i) {
- kfree(usb_get_serial_port_data(serial->port[i]));
- usb_set_serial_port_data(serial->port[i], NULL);
- }
- return -ENOMEM;
+static void ark3116_init_termios(struct tty_struct *tty)
+{
+ struct ktermios *termios = tty->termios;
+ *termios = tty_std_termios;
+ termios->c_cflag = B9600 | CS8
+ | CREAD | HUPCL | CLOCAL;
+ termios->c_ispeed = 9600;
+ termios->c_ospeed = 9600;
}
static void ark3116_set_termios(struct tty_struct *tty,
@@ -163,10 +150,8 @@ static void ark3116_set_termios(struct tty_struct *tty,
struct ktermios *old_termios)
{
struct usb_serial *serial = port->serial;
- struct ark3116_private *priv = usb_get_serial_port_data(port);
struct ktermios *termios = tty->termios;
unsigned int cflag = termios->c_cflag;
- unsigned long flags;
int baud;
int ark3116_baud;
char *buf;
@@ -176,16 +161,6 @@ static void ark3116_set_termios(struct tty_struct *tty,
dbg("%s - port %d", __func__, port->number);
- spin_lock_irqsave(&priv->lock, flags);
- if (!priv->termios_initialized) {
- *termios = tty_std_termios;
- termios->c_cflag = B9600 | CS8
- | CREAD | HUPCL | CLOCAL;
- termios->c_ispeed = 9600;
- termios->c_ospeed = 9600;
- priv->termios_initialized = 1;
- }
- spin_unlock_irqrestore(&priv->lock, flags);
cflag = termios->c_cflag;
termios->c_cflag &= ~(CMSPAR|CRTSCTS);
@@ -318,8 +293,7 @@ static void ark3116_set_termios(struct tty_struct *tty,
return;
}
-static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp)
+static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct ktermios tmp_termios;
struct usb_serial *serial = port->serial;
@@ -334,7 +308,7 @@ static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port,
return -ENOMEM;
}
- result = usb_serial_generic_open(tty, port, filp);
+ result = usb_serial_generic_open(tty, port);
if (result)
goto err_out;
@@ -455,6 +429,7 @@ static struct usb_serial_driver ark3116_device = {
.num_ports = 1,
.attach = ark3116_attach,
.set_termios = ark3116_set_termios,
+ .init_termios = ark3116_init_termios,
.ioctl = ark3116_ioctl,
.tiocmget = ark3116_tiocmget,
.open = ark3116_open,
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index 7033b031b44..a0467bc6162 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -92,7 +92,7 @@ static int debug;
static int belkin_sa_startup(struct usb_serial *serial);
static void belkin_sa_release(struct usb_serial *serial);
static int belkin_sa_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp);
+ struct usb_serial_port *port);
static void belkin_sa_close(struct usb_serial_port *port);
static void belkin_sa_read_int_callback(struct urb *urb);
static void belkin_sa_set_termios(struct tty_struct *tty,
@@ -213,7 +213,7 @@ static void belkin_sa_release(struct usb_serial *serial)
static int belkin_sa_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+ struct usb_serial_port *port)
{
int retval = 0;
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 2830766f5b3..8c894a7d5dc 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -300,8 +300,7 @@ static void ch341_close(struct usb_serial_port *port)
/* open this device, set default parameters */
-static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp)
+static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
struct ch341_private *priv = usb_get_serial_port_data(serial->port[0]);
@@ -333,7 +332,7 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port,
return -EPROTO;
}
- r = usb_serial_generic_open(tty, port, filp);
+ r = usb_serial_generic_open(tty, port);
out: return r;
}
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 0e4f2e41ace..b22ac325852 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -16,6 +16,7 @@
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/console.h>
+#include <linux/serial.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
@@ -63,7 +64,7 @@ static int usb_console_setup(struct console *co, char *options)
char *s;
struct usb_serial *serial;
struct usb_serial_port *port;
- int retval = 0;
+ int retval;
struct tty_struct *tty = NULL;
struct ktermios *termios = NULL, dummy;
@@ -116,13 +117,17 @@ static int usb_console_setup(struct console *co, char *options)
return -ENODEV;
}
- port = serial->port[0];
+ retval = usb_autopm_get_interface(serial->interface);
+ if (retval)
+ goto error_get_interface;
+
+ port = serial->port[co->index - serial->minor];
tty_port_tty_set(&port->port, NULL);
info->port = port;
++port->port.count;
- if (port->port.count == 1) {
+ if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags)) {
if (serial->type->set_termios) {
/*
* allocate a fake tty so the driver can initialize
@@ -150,9 +155,9 @@ static int usb_console_setup(struct console *co, char *options)
/* only call the device specific open if this
* is the first time the port is opened */
if (serial->type->open)
- retval = serial->type->open(NULL, port, NULL);
+ retval = serial->type->open(NULL, port);
else
- retval = usb_serial_generic_open(NULL, port, NULL);
+ retval = usb_serial_generic_open(NULL, port);
if (retval) {
err("could not open USB console port");
@@ -168,6 +173,7 @@ static int usb_console_setup(struct console *co, char *options)
kfree(termios);
kfree(tty);
}
+ set_bit(ASYNCB_INITIALIZED, &port->port.flags);
}
/* Now that any required fake tty operations are completed restore
* the tty port count */
@@ -175,18 +181,22 @@ static int usb_console_setup(struct console *co, char *options)
/* The console is special in terms of closing the device so
* indicate this port is now acting as a system console. */
port->console = 1;
- retval = 0;
-out:
+ mutex_unlock(&serial->disc_mutex);
return retval;
-free_termios:
+
+ free_termios:
kfree(termios);
tty_port_tty_set(&port->port, NULL);
-free_tty:
+ free_tty:
kfree(tty);
-reset_open_count:
+ reset_open_count:
port->port.count = 0;
- goto out;
+ usb_autopm_put_interface(serial->interface);
+ error_get_interface:
+ usb_serial_put(serial);
+ mutex_unlock(&serial->disc_mutex);
+ return retval;
}
static void usb_console_write(struct console *co,
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 985cbcf48bd..4a208fe85bc 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -33,8 +33,7 @@
/*
* Function Prototypes
*/
-static int cp210x_open(struct tty_struct *, struct usb_serial_port *,
- struct file *);
+static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *);
static void cp210x_cleanup(struct usb_serial_port *);
static void cp210x_close(struct usb_serial_port *);
static void cp210x_get_termios(struct tty_struct *,
@@ -368,8 +367,7 @@ static unsigned int cp210x_quantise_baudrate(unsigned int baud) {
return baud;
}
-static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp)
+static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
int result;
@@ -399,12 +397,6 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port,
/* Configure the termios structure */
cp210x_get_termios(tty, port);
-
- /* Set the DTR and RTS pins low */
- cp210x_tiocmset_port(tty ? (struct usb_serial_port *) tty->driver_data
- : port,
- NULL, TIOCM_DTR | TIOCM_RTS, 0);
-
return 0;
}
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 336523fd736..b0f6402a91c 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -61,7 +61,7 @@ static int cyberjack_startup(struct usb_serial *serial);
static void cyberjack_disconnect(struct usb_serial *serial);
static void cyberjack_release(struct usb_serial *serial);
static int cyberjack_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp);
+ struct usb_serial_port *port);
static void cyberjack_close(struct usb_serial_port *port);
static int cyberjack_write(struct tty_struct *tty,
struct usb_serial_port *port, const unsigned char *buf, int count);
@@ -173,7 +173,7 @@ static void cyberjack_release(struct usb_serial *serial)
}
static int cyberjack_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+ struct usb_serial_port *port)
{
struct cyberjack_private *priv;
unsigned long flags;
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 59adfe12311..e0a8b715f2f 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -172,8 +172,7 @@ static int cypress_earthmate_startup(struct usb_serial *serial);
static int cypress_hidcom_startup(struct usb_serial *serial);
static int cypress_ca42v2_startup(struct usb_serial *serial);
static void cypress_release(struct usb_serial *serial);
-static int cypress_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp);
+static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port);
static void cypress_close(struct usb_serial_port *port);
static void cypress_dtr_rts(struct usb_serial_port *port, int on);
static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
@@ -633,8 +632,7 @@ static void cypress_release(struct usb_serial *serial)
}
-static int cypress_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct cypress_private *priv = usb_get_serial_port_data(port);
struct usb_serial *serial = port->serial;
@@ -659,15 +657,7 @@ static int cypress_open(struct tty_struct *tty,
spin_unlock_irqrestore(&priv->lock, flags);
/* Set termios */
- result = cypress_write(tty, port, NULL, 0);
-
- if (result) {
- dev_err(&port->dev,
- "%s - failed setting the control lines - error %d\n",
- __func__, result);
- return result;
- } else
- dbg("%s - success setting the control lines", __func__);
+ cypress_send(port);
if (tty)
cypress_set_termios(tty, port, &priv->tmp_termios);
@@ -1005,6 +995,8 @@ static void cypress_set_termios(struct tty_struct *tty,
dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&priv->lock, flags);
+ /* We can't clean this one up as we don't know the device type
+ early enough */
if (!priv->termios_initialized) {
if (priv->chiptype == CT_EARTHMATE) {
*(tty->termios) = tty_std_termios;
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index f4808091c47..ab3dd991586 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -453,8 +453,7 @@ static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
static void digi_write_bulk_callback(struct urb *urb);
static int digi_write_room(struct tty_struct *tty);
static int digi_chars_in_buffer(struct tty_struct *tty);
-static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp);
+static int digi_open(struct tty_struct *tty, struct usb_serial_port *port);
static void digi_close(struct usb_serial_port *port);
static int digi_carrier_raised(struct usb_serial_port *port);
static void digi_dtr_rts(struct usb_serial_port *port, int on);
@@ -1347,8 +1346,7 @@ static int digi_carrier_raised(struct usb_serial_port *port)
return 0;
}
-static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp)
+static int digi_open(struct tty_struct *tty, struct usb_serial_port *port)
{
int ret;
unsigned char buf[32];
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 80cb3471adb..33c9e9cf9eb 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -79,8 +79,7 @@ static int debug;
#define EMPEG_PRODUCT_ID 0x0001
/* function prototypes for an empeg-car player */
-static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp);
+static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port);
static void empeg_close(struct usb_serial_port *port);
static int empeg_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf,
@@ -90,8 +89,7 @@ static int empeg_chars_in_buffer(struct tty_struct *tty);
static void empeg_throttle(struct tty_struct *tty);
static void empeg_unthrottle(struct tty_struct *tty);
static int empeg_startup(struct usb_serial *serial);
-static void empeg_set_termios(struct tty_struct *tty,
- struct usb_serial_port *port, struct ktermios *old_termios);
+static void empeg_init_termios(struct tty_struct *tty);
static void empeg_write_bulk_callback(struct urb *urb);
static void empeg_read_bulk_callback(struct urb *urb);
@@ -123,7 +121,7 @@ static struct usb_serial_driver empeg_device = {
.throttle = empeg_throttle,
.unthrottle = empeg_unthrottle,
.attach = empeg_startup,
- .set_termios = empeg_set_termios,
+ .init_termios = empeg_init_termios,
.write = empeg_write,
.write_room = empeg_write_room,
.chars_in_buffer = empeg_chars_in_buffer,
@@ -142,17 +140,13 @@ static int bytes_out;
/******************************************************************************
* Empeg specific driver functions
******************************************************************************/
-static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp)
+static int empeg_open(struct tty_struct *tty,struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
int result = 0;
dbg("%s - port %d", __func__, port->number);
- /* Force default termio settings */
- empeg_set_termios(tty, port, NULL) ;
-
bytes_in = 0;
bytes_out = 0;
@@ -425,11 +419,9 @@ static int empeg_startup(struct usb_serial *serial)
}
-static void empeg_set_termios(struct tty_struct *tty,
- struct usb_serial_port *port, struct ktermios *old_termios)
+static void empeg_init_termios(struct tty_struct *tty)
{
struct ktermios *termios = tty->termios;
- dbg("%s - port %d", __func__, port->number);
/*
* The empeg-car player wants these particular tty settings.
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 8fec5d4455c..76a17f915ee 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -747,8 +747,7 @@ static int ftdi_sio_probe(struct usb_serial *serial,
const struct usb_device_id *id);
static int ftdi_sio_port_probe(struct usb_serial_port *port);
static int ftdi_sio_port_remove(struct usb_serial_port *port);
-static int ftdi_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp);
+static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port);
static void ftdi_close(struct usb_serial_port *port);
static void ftdi_dtr_rts(struct usb_serial_port *port, int on);
static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
@@ -1680,8 +1679,7 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port)
return 0;
}
-static int ftdi_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
{ /* ftdi_open */
struct usb_device *dev = port->serial->dev;
struct ftdi_private *priv = usb_get_serial_port_data(port);
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 8839f1c70b7..20432d34552 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -933,8 +933,7 @@ static int garmin_init_session(struct usb_serial_port *port)
-static int garmin_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static int garmin_open(struct tty_struct *tty, struct usb_serial_port *port)
{
unsigned long flags;
int status = 0;
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index ce57f6a32bd..d9398e9f30c 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -114,8 +114,7 @@ void usb_serial_generic_deregister(void)
#endif
}
-int usb_serial_generic_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+int usb_serial_generic_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
int result = 0;
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 0191693625d..dc0f832657e 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -205,8 +205,7 @@ static void edge_bulk_out_data_callback(struct urb *urb);
static void edge_bulk_out_cmd_callback(struct urb *urb);
/* function prototypes for the usbserial callbacks */
-static int edge_open(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp);
+static int edge_open(struct tty_struct *tty, struct usb_serial_port *port);
static void edge_close(struct usb_serial_port *port);
static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count);
@@ -852,8 +851,7 @@ static void edge_bulk_out_cmd_callback(struct urb *urb)
* If successful, we return 0
* Otherwise we return a negative error number.
*****************************************************************************/
-static int edge_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
struct usb_serial *serial;
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index e8bc42f92e7..d4cc0f7af40 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -1831,8 +1831,7 @@ static void edge_bulk_out_callback(struct urb *urb)
tty_kref_put(tty);
}
-static int edge_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
struct edgeport_serial *edge_serial;
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 2545d45ce16..24fcc64b837 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -75,7 +75,7 @@ static int initial_wait;
/* Function prototypes for an ipaq */
static int ipaq_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp);
+ struct usb_serial_port *port);
static void ipaq_close(struct usb_serial_port *port);
static int ipaq_calc_num_ports(struct usb_serial *serial);
static int ipaq_startup(struct usb_serial *serial);
@@ -587,7 +587,7 @@ static int bytes_in;
static int bytes_out;
static int ipaq_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+ struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
struct ipaq_private *priv;
@@ -628,11 +628,6 @@ static int ipaq_open(struct tty_struct *tty,
priv->free_len += PACKET_SIZE;
}
- if (tty) {
- /* FIXME: These two are bogus */
- tty->raw = 1;
- tty->real_raw = 1;
- }
/*
* Lose the small buffers usbserial provides. Make larger ones.
*/
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index 29ad038b9c8..727d323f092 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -193,8 +193,7 @@ static void ipw_read_bulk_callback(struct urb *urb)
return;
}
-static int ipw_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct usb_device *dev = port->serial->dev;
u8 buf_flow_static[16] = IPW_BYTES_FLOWINIT;
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index 66009b6b763..95d8d26b9a4 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -86,8 +86,7 @@ static int buffer_size;
static int xbof = -1;
static int ir_startup (struct usb_serial *serial);
-static int ir_open(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filep);
+static int ir_open(struct tty_struct *tty, struct usb_serial_port *port);
static void ir_close(struct usb_serial_port *port);
static int ir_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count);
@@ -296,8 +295,7 @@ static int ir_startup(struct usb_serial *serial)
return 0;
}
-static int ir_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static int ir_open(struct tty_struct *tty, struct usb_serial_port *port)
{
char *buffer;
int result = 0;
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 96873a7a32b..6138c1cda35 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -71,7 +71,6 @@ struct iuu_private {
spinlock_t lock; /* store irq state */
wait_queue_head_t delta_msr_wait;
u8 line_status;
- u8 termios_initialized;
int tiostatus; /* store IUART SIGNAL for tiocmget call */
u8 reset; /* if 1 reset is needed */
int poll; /* number of poll */
@@ -1018,14 +1017,24 @@ static void iuu_close(struct usb_serial_port *port)
}
}
-static int iuu_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static void iuu_init_termios(struct tty_struct *tty)
+{
+ *(tty->termios) = tty_std_termios;
+ tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600
+ | TIOCM_CTS | CSTOPB | PARENB;
+ tty->termios->c_ispeed = 9600;
+ tty->termios->c_ospeed = 9600;
+ tty->termios->c_lflag = 0;
+ tty->termios->c_oflag = 0;
+ tty->termios->c_iflag = 0;
+}
+
+static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
u8 *buf;
int result;
u32 actual;
- unsigned long flags;
struct iuu_private *priv = usb_get_serial_port_data(port);
dbg("%s - port %d", __func__, port->number);
@@ -1064,21 +1073,7 @@ static int iuu_open(struct tty_struct *tty,
port->bulk_in_buffer, 512,
NULL, NULL);
- /* set the termios structure */
- spin_lock_irqsave(&priv->lock, flags);
- if (tty && !priv->termios_initialized) {
- *(tty->termios) = tty_std_termios;
- tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600
- | TIOCM_CTS | CSTOPB | PARENB;
- tty->termios->c_ispeed = 9600;
- tty->termios->c_ospeed = 9600;
- tty->termios->c_lflag = 0;
- tty->termios->c_oflag = 0;
- tty->termios->c_iflag = 0;
- priv->termios_initialized = 1;
- priv->poll = 0;
- }
- spin_unlock_irqrestore(&priv->lock, flags);
+ priv->poll = 0;
/* initialize writebuf */
#define FISH(a, b, c, d) do { \
@@ -1201,6 +1196,7 @@ static struct usb_serial_driver iuu_device = {
.tiocmget = iuu_tiocmget,
.tiocmset = iuu_tiocmset,
.set_termios = iuu_set_termios,
+ .init_termios = iuu_init_termios,
.attach = iuu_startup,
.release = iuu_release,
};
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 2594b8743d3..f8c4b07033f 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -1209,8 +1209,7 @@ static int keyspan_write_room(struct tty_struct *tty)
}
-static int keyspan_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct keyspan_port_private *p_priv;
struct keyspan_serial_private *s_priv;
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index 3107ed15af6..30771e5b397 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -36,8 +36,7 @@
/* Function prototypes for Keyspan serial converter */
static int keyspan_open (struct tty_struct *tty,
- struct usb_serial_port *port,
- struct file *filp);
+ struct usb_serial_port *port);
static void keyspan_close (struct usb_serial_port *port);
static void keyspan_dtr_rts (struct usb_serial_port *port, int on);
static int keyspan_startup (struct usb_serial *serial);
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index d0b12e40c2b..257c16cc6b2 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -681,7 +681,7 @@ static int keyspan_pda_carrier_raised(struct usb_serial_port *port)
static int keyspan_pda_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+ struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
unsigned char room;
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 0f44bb8e8d4..a61673133d7 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -75,8 +75,7 @@ static int debug;
static int klsi_105_startup(struct usb_serial *serial);
static void klsi_105_disconnect(struct usb_serial *serial);
static void klsi_105_release(struct usb_serial *serial);
-static int klsi_105_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp);
+static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port);
static void klsi_105_close(struct usb_serial_port *port);
static int klsi_105_write(struct tty_struct *tty,
struct usb_serial_port *port, const unsigned char *buf, int count);
@@ -358,8 +357,7 @@ static void klsi_105_release(struct usb_serial *serial)
}
} /* klsi_105_release */
-static int klsi_105_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct klsi_105_private *priv = usb_get_serial_port_data(port);
int retval = 0;
@@ -371,10 +369,6 @@ static int klsi_105_open(struct tty_struct *tty,
dbg("%s port %d", __func__, port->number);
- /* force low_latency on so that our tty_push actually forces
- * the data through
- * tty->low_latency = 1; */
-
/* Do a defined restart:
* Set up sane default baud rate and send the 'READ_ON'
* vendor command.
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 6db0e561f68..45ea694b3ae 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -70,8 +70,7 @@ static int debug;
/* Function prototypes */
static int kobil_startup(struct usb_serial *serial);
static void kobil_release(struct usb_serial *serial);
-static int kobil_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp);
+static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port);
static void kobil_close(struct usb_serial_port *port);
static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count);
@@ -85,7 +84,7 @@ static void kobil_read_int_callback(struct urb *urb);
static void kobil_write_callback(struct urb *purb);
static void kobil_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old);
-
+static void kobil_init_termios(struct tty_struct *tty);
static struct usb_device_id id_table [] = {
{ USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_ADAPTER_B_PRODUCT_ID) },
@@ -120,6 +119,7 @@ static struct usb_serial_driver kobil_device = {
.release = kobil_release,
.ioctl = kobil_ioctl,
.set_termios = kobil_set_termios,
+ .init_termios = kobil_init_termios,
.tiocmget = kobil_tiocmget,
.tiocmset = kobil_tiocmset,
.open = kobil_open,
@@ -210,9 +210,17 @@ static void kobil_release(struct usb_serial *serial)
kfree(usb_get_serial_port_data(serial->port[i]));
}
+static void kobil_init_termios(struct tty_struct *tty)
+{
+ /* Default to echo off and other sane device settings */
+ tty->termios->c_lflag = 0;
+ tty->termios->c_lflag &= ~(ISIG | ICANON | ECHO | IEXTEN | XCASE);
+ tty->termios->c_iflag = IGNBRK | IGNPAR | IXOFF;
+ /* do NOT translate CR to CR-NL (0x0A -> 0x0A 0x0D) */
+ tty->termios->c_oflag &= ~ONLCR;
+}
-static int kobil_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port)
{
int result = 0;
struct kobil_private *priv;
@@ -226,16 +234,6 @@ static int kobil_open(struct tty_struct *tty,
/* someone sets the dev to 0 if the close method has been called */
port->interrupt_in_urb->dev = port->serial->dev;
- if (tty) {
-
- /* Default to echo off and other sane device settings */
- tty->termios->c_lflag = 0;
- tty->termios->c_lflag &= ~(ISIG | ICANON | ECHO | IEXTEN |
- XCASE);
- tty->termios->c_iflag = IGNBRK | IGNPAR | IXOFF;
- /* do NOT translate CR to CR-NL (0x0A -> 0x0A 0x0D) */
- tty->termios->c_oflag &= ~ONLCR;
- }
/* allocate memory for transfer buffer */
transfer_buffer = kzalloc(transfer_buffer_length, GFP_KERNEL);
if (!transfer_buffer)
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index d8825e159aa..ad4998bbf16 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -93,8 +93,7 @@ static int debug;
*/
static int mct_u232_startup(struct usb_serial *serial);
static void mct_u232_release(struct usb_serial *serial);
-static int mct_u232_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp);
+static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port);
static void mct_u232_close(struct usb_serial_port *port);
static void mct_u232_dtr_rts(struct usb_serial_port *port, int on);
static void mct_u232_read_int_callback(struct urb *urb);
@@ -421,8 +420,7 @@ static void mct_u232_release(struct usb_serial *serial)
}
} /* mct_u232_release */
-static int mct_u232_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
struct mct_u232_private *priv = usb_get_serial_port_data(port);
@@ -568,10 +566,13 @@ static void mct_u232_read_int_callback(struct urb *urb)
* Work-a-round: handle the 'usual' bulk-in pipe here
*/
if (urb->transfer_buffer_length > 2) {
- tty = tty_port_tty_get(&port->port);
if (urb->actual_length) {
- tty_insert_flip_string(tty, data, urb->actual_length);
- tty_flip_buffer_push(tty);
+ tty = tty_port_tty_get(&port->port);
+ if (tty) {
+ tty_insert_flip_string(tty, data,
+ urb->actual_length);
+ tty_flip_buffer_push(tty);
+ }
tty_kref_put(tty);
}
goto exit;
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index ccd4dd340d2..763e32a44be 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -85,7 +85,7 @@ static int debug;
#define MOSCHIP_DEVICE_ID_7720 0x7720
#define MOSCHIP_DEVICE_ID_7715 0x7715
-static struct usb_device_id moschip_port_id_table [] = {
+static struct usb_device_id moschip_port_id_table[] = {
{ USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7720) },
{ } /* terminating entry */
};
@@ -319,8 +319,7 @@ static int send_mos_cmd(struct usb_serial *serial, __u8 request, __u16 value,
return status;
}
-static int mos7720_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct usb_serial *serial;
struct usb_serial_port *port0;
@@ -378,10 +377,14 @@ static int mos7720_open(struct tty_struct *tty,
/* Initialize MCS7720 -- Write Init values to corresponding Registers
*
* Register Index
+ * 0 : THR/RHR
* 1 : IER
* 2 : FCR
* 3 : LCR
* 4 : MCR
+ * 5 : LSR
+ * 6 : MSR
+ * 7 : SPR
*
* 0x08 : SP1/2 Control Reg
*/
@@ -1250,20 +1253,88 @@ static void mos7720_set_termios(struct tty_struct *tty,
static int get_lsr_info(struct tty_struct *tty,
struct moschip_port *mos7720_port, unsigned int __user *value)
{
- int count;
+ struct usb_serial_port *port = tty->driver_data;
unsigned int result = 0;
+ unsigned char data = 0;
+ int port_number = port->number - port->serial->minor;
+ int count;
count = mos7720_chars_in_buffer(tty);
if (count == 0) {
- dbg("%s -- Empty", __func__);
- result = TIOCSER_TEMT;
+ send_mos_cmd(port->serial, MOS_READ, port_number,
+ UART_LSR, &data);
+ if ((data & (UART_LSR_TEMT | UART_LSR_THRE))
+ == (UART_LSR_TEMT | UART_LSR_THRE)) {
+ dbg("%s -- Empty", __func__);
+ result = TIOCSER_TEMT;
+ }
}
-
if (copy_to_user(value, &result, sizeof(int)))
return -EFAULT;
return 0;
}
+static int mos7720_tiocmget(struct tty_struct *tty, struct file *file)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct moschip_port *mos7720_port = usb_get_serial_port_data(port);
+ unsigned int result = 0;
+ unsigned int mcr ;
+ unsigned int msr ;
+
+ dbg("%s - port %d", __func__, port->number);
+
+ mcr = mos7720_port->shadowMCR;
+ msr = mos7720_port->shadowMSR;
+
+ result = ((mcr & UART_MCR_DTR) ? TIOCM_DTR : 0) /* 0x002 */
+ | ((mcr & UART_MCR_RTS) ? TIOCM_RTS : 0) /* 0x004 */
+ | ((msr & UART_MSR_CTS) ? TIOCM_CTS : 0) /* 0x020 */
+ | ((msr & UART_MSR_DCD) ? TIOCM_CAR : 0) /* 0x040 */
+ | ((msr & UART_MSR_RI) ? TIOCM_RI : 0) /* 0x080 */
+ | ((msr & UART_MSR_DSR) ? TIOCM_DSR : 0); /* 0x100 */
+
+ dbg("%s -- %x", __func__, result);
+
+ return result;
+}
+
+static int mos7720_tiocmset(struct tty_struct *tty, struct file *file,
+ unsigned int set, unsigned int clear)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct moschip_port *mos7720_port = usb_get_serial_port_data(port);
+ unsigned int mcr ;
+ unsigned char lmcr;
+
+ dbg("%s - port %d", __func__, port->number);
+ dbg("he was at tiocmget");
+
+ mcr = mos7720_port->shadowMCR;
+
+ if (set & TIOCM_RTS)
+ mcr |= UART_MCR_RTS;
+ if (set & TIOCM_DTR)
+ mcr |= UART_MCR_DTR;
+ if (set & TIOCM_LOOP)
+ mcr |= UART_MCR_LOOP;
+
+ if (clear & TIOCM_RTS)
+ mcr &= ~UART_MCR_RTS;
+ if (clear & TIOCM_DTR)
+ mcr &= ~UART_MCR_DTR;
+ if (clear & TIOCM_LOOP)
+ mcr &= ~UART_MCR_LOOP;
+
+ mos7720_port->shadowMCR = mcr;
+ lmcr = mos7720_port->shadowMCR;
+
+ send_mos_cmd(port->serial, MOS_WRITE,
+ port->number - port->serial->minor, UART_MCR, &lmcr);
+
+ return 0;
+}
+
static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd,
unsigned int __user *value)
{
@@ -1301,14 +1372,6 @@ static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd,
mcr &= ~UART_MCR_LOOP;
break;
- case TIOCMSET:
- /* turn off the RTS and DTR and LOOPBACK
- * and then only turn on what was asked to */
- mcr &= ~(UART_MCR_RTS | UART_MCR_DTR | UART_MCR_LOOP);
- mcr |= ((arg & TIOCM_RTS) ? UART_MCR_RTS : 0);
- mcr |= ((arg & TIOCM_DTR) ? UART_MCR_DTR : 0);
- mcr |= ((arg & TIOCM_LOOP) ? UART_MCR_LOOP : 0);
- break;
}
mos7720_port->shadowMCR = mcr;
@@ -1320,28 +1383,6 @@ static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd,
return 0;
}
-static int get_modem_info(struct moschip_port *mos7720_port,
- unsigned int __user *value)
-{
- unsigned int result = 0;
- unsigned int msr = mos7720_port->shadowMSR;
- unsigned int mcr = mos7720_port->shadowMCR;
-
- result = ((mcr & UART_MCR_DTR) ? TIOCM_DTR: 0) /* 0x002 */
- | ((mcr & UART_MCR_RTS) ? TIOCM_RTS: 0) /* 0x004 */
- | ((msr & UART_MSR_CTS) ? TIOCM_CTS: 0) /* 0x020 */
- | ((msr & UART_MSR_DCD) ? TIOCM_CAR: 0) /* 0x040 */
- | ((msr & UART_MSR_RI) ? TIOCM_RI: 0) /* 0x080 */
- | ((msr & UART_MSR_DSR) ? TIOCM_DSR: 0); /* 0x100 */
-
-
- dbg("%s -- %x", __func__, result);
-
- if (copy_to_user(value, &result, sizeof(int)))
- return -EFAULT;
- return 0;
-}
-
static int get_serial_info(struct moschip_port *mos7720_port,
struct serial_struct __user *retinfo)
{
@@ -1392,17 +1433,11 @@ static int mos7720_ioctl(struct tty_struct *tty, struct file *file,
/* FIXME: These should be using the mode methods */
case TIOCMBIS:
case TIOCMBIC:
- case TIOCMSET:
dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET",
__func__, port->number);
return set_modem_info(mos7720_port, cmd,
(unsigned int __user *)arg);
- case TIOCMGET:
- dbg("%s (%d) TIOCMGET", __func__, port->number);
- return get_modem_info(mos7720_port,
- (unsigned int __user *)arg);
-
case TIOCGSERIAL:
dbg("%s (%d) TIOCGSERIAL", __func__, port->number);
return get_serial_info(mos7720_port,
@@ -1557,6 +1592,8 @@ static struct usb_serial_driver moschip7720_2port_driver = {
.attach = mos7720_startup,
.release = mos7720_release,
.ioctl = mos7720_ioctl,
+ .tiocmget = mos7720_tiocmget,
+ .tiocmset = mos7720_tiocmset,
.set_termios = mos7720_set_termios,
.write = mos7720_write,
.write_room = mos7720_write_room,
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 270009afdf7..f11abf52be7 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -824,8 +824,7 @@ static int mos7840_serial_probe(struct usb_serial *serial,
* Otherwise we return a negative error number.
*****************************************************************************/
-static int mos7840_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
{
int response;
int j;
@@ -2134,106 +2133,6 @@ static int mos7840_get_lsr_info(struct tty_struct *tty,
}
/*****************************************************************************
- * mos7840_set_modem_info
- * function to set modem info
- *****************************************************************************/
-
-/* FIXME: Should be using the model control hooks */
-
-static int mos7840_set_modem_info(struct moschip_port *mos7840_port,
- unsigned int cmd, unsigned int __user *value)
-{
- unsigned int mcr;
- unsigned int arg;
- __u16 Data;
- int status;
- struct usb_serial_port *port;
-
- if (mos7840_port == NULL)
- return -1;
-
- port = (struct usb_serial_port *)mos7840_port->port;
- if (mos7840_port_paranoia_check(port, __func__)) {
- dbg("%s", "Invalid port");
- return -1;
- }
-
- mcr = mos7840_port->shadowMCR;
-
- if (copy_from_user(&arg, value, sizeof(int)))
- return -EFAULT;
-
- switch (cmd) {
- case TIOCMBIS:
- if (arg & TIOCM_RTS)
- mcr |= MCR_RTS;
- if (arg & TIOCM_DTR)
- mcr |= MCR_RTS;
- if (arg & TIOCM_LOOP)
- mcr |= MCR_LOOPBACK;
- break;
-
- case TIOCMBIC:
- if (arg & TIOCM_RTS)
- mcr &= ~MCR_RTS;
- if (arg & TIOCM_DTR)
- mcr &= ~MCR_RTS;
- if (arg & TIOCM_LOOP)
- mcr &= ~MCR_LOOPBACK;
- break;
-
- case TIOCMSET:
- /* turn off the RTS and DTR and LOOPBACK
- * and then only turn on what was asked to */
- mcr &= ~(MCR_RTS | MCR_DTR | MCR_LOOPBACK);
- mcr |= ((arg & TIOCM_RTS) ? MCR_RTS : 0);
- mcr |= ((arg & TIOCM_DTR) ? MCR_DTR : 0);
- mcr |= ((arg & TIOCM_LOOP) ? MCR_LOOPBACK : 0);
- break;
- }
-
- lock_kernel();
- mos7840_port->shadowMCR = mcr;
-
- Data = mos7840_port->shadowMCR;
- status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
- unlock_kernel();
- if (status < 0) {
- dbg("setting MODEM_CONTROL_REGISTER Failed");
- return -1;
- }
-
- return 0;
-}
-
-/*****************************************************************************
- * mos7840_get_modem_info
- * function to get modem info
- *****************************************************************************/
-
-static int mos7840_get_modem_info(struct moschip_port *mos7840_port,
- unsigned int __user *value)
-{
- unsigned int result = 0;
- __u16 msr;
- unsigned int mcr = mos7840_port->shadowMCR;
- mos7840_get_uart_reg(mos7840_port->port,
- MODEM_STATUS_REGISTER, &msr);
- result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0) /* 0x002 */
- |((mcr & MCR_RTS) ? TIOCM_RTS : 0) /* 0x004 */
- |((msr & MOS7840_MSR_CTS) ? TIOCM_CTS : 0) /* 0x020 */
- |((msr & MOS7840_MSR_CD) ? TIOCM_CAR : 0) /* 0x040 */
- |((msr & MOS7840_MSR_RI) ? TIOCM_RI : 0) /* 0x080 */
- |((msr & MOS7840_MSR_DSR) ? TIOCM_DSR : 0); /* 0x100 */
-
- dbg("%s -- %x", __func__, result);
-
- if (copy_to_user(value, &result, sizeof(int)))
- return -EFAULT;
- return 0;
-}
-
-/*****************************************************************************
* mos7840_get_serial_info
* function to get information about serial port
*****************************************************************************/
@@ -2281,7 +2180,6 @@ static int mos7840_ioctl(struct tty_struct *tty, struct file *file,
struct async_icount cnow;
struct async_icount cprev;
struct serial_icounter_struct icount;
- int mosret = 0;
if (mos7840_port_paranoia_check(port, __func__)) {
dbg("%s", "Invalid port");
@@ -2303,20 +2201,6 @@ static int mos7840_ioctl(struct tty_struct *tty, struct file *file,
return mos7840_get_lsr_info(tty, argp);
return 0;
- /* FIXME: use the modem hooks and remove this */
- case TIOCMBIS:
- case TIOCMBIC:
- case TIOCMSET:
- dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __func__,
- port->number);
- mosret =
- mos7840_set_modem_info(mos7840_port, cmd, argp);
- return mosret;
-
- case TIOCMGET:
- dbg("%s (%d) TIOCMGET", __func__, port->number);
- return mos7840_get_modem_info(mos7840_port, argp);
-
case TIOCGSERIAL:
dbg("%s (%d) TIOCGSERIAL", __func__, port->number);
return mos7840_get_serial_info(mos7840_port, argp);
diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c
index f5f3751a888..5ceaa4c6be0 100644
--- a/drivers/usb/serial/navman.c
+++ b/drivers/usb/serial/navman.c
@@ -80,8 +80,7 @@ exit:
__func__, result);
}
-static int navman_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static int navman_open(struct tty_struct *tty, struct usb_serial_port *port)
{
int result = 0;
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 56857ddbd70..062265038bf 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -64,8 +64,7 @@ static int debug;
#define BT_IGNITIONPRO_ID 0x2000
/* function prototypes */
-static int omninet_open(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp);
+static int omninet_open(struct tty_struct *tty, struct usb_serial_port *port);
static void omninet_close(struct usb_serial_port *port);
static void omninet_read_bulk_callback(struct urb *urb);
static void omninet_write_bulk_callback(struct urb *urb);
@@ -163,8 +162,7 @@ static int omninet_attach(struct usb_serial *serial)
return 0;
}
-static int omninet_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static int omninet_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
struct usb_serial_port *wport;
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 336bba79ad3..1085a577c5c 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -144,8 +144,7 @@ exit:
spin_unlock(&priv->lock);
}
-static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp)
+static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct opticon_private *priv = usb_get_serial_data(port->serial);
unsigned long flags;
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index c784ddbe7b6..fe47051dbef 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -45,8 +45,7 @@
/* Function prototypes */
static int option_probe(struct usb_serial *serial,
const struct usb_device_id *id);
-static int option_open(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp);
+static int option_open(struct tty_struct *tty, struct usb_serial_port *port);
static void option_close(struct usb_serial_port *port);
static void option_dtr_rts(struct usb_serial_port *port, int on);
@@ -961,8 +960,7 @@ static int option_chars_in_buffer(struct tty_struct *tty)
return data_len;
}
-static int option_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static int option_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct option_port_private *portdata;
int i, err;
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index 3cece27325e..0f4a70ce382 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -141,11 +141,11 @@ struct oti6858_control_pkt {
&& ((a)->frame_fmt == (priv)->pending_setup.frame_fmt))
/* function prototypes */
-static int oti6858_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp);
+static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port);
static void oti6858_close(struct usb_serial_port *port);
static void oti6858_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old);
+static void oti6858_init_termios(struct tty_struct *tty);
static int oti6858_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg);
static void oti6858_read_int_callback(struct urb *urb);
@@ -186,6 +186,7 @@ static struct usb_serial_driver oti6858_device = {
.write = oti6858_write,
.ioctl = oti6858_ioctl,
.set_termios = oti6858_set_termios,
+ .init_termios = oti6858_init_termios,
.tiocmget = oti6858_tiocmget,
.tiocmset = oti6858_tiocmset,
.read_bulk_callback = oti6858_read_bulk_callback,
@@ -206,7 +207,6 @@ struct oti6858_private {
struct {
u8 read_urb_in_use;
u8 write_urb_in_use;
- u8 termios_initialized;
} flags;
struct delayed_work delayed_write_work;
@@ -447,6 +447,14 @@ static int oti6858_chars_in_buffer(struct tty_struct *tty)
return chars;
}
+static void oti6858_init_termios(struct tty_struct *tty)
+{
+ *(tty->termios) = tty_std_termios;
+ tty->termios->c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL;
+ tty->termios->c_ispeed = 38400;
+ tty->termios->c_ospeed = 38400;
+}
+
static void oti6858_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
@@ -464,16 +472,6 @@ static void oti6858_set_termios(struct tty_struct *tty,
return;
}
- spin_lock_irqsave(&priv->lock, flags);
- if (!priv->flags.termios_initialized) {
- *(tty->termios) = tty_std_termios;
- tty->termios->c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL;
- tty->termios->c_ispeed = 38400;
- tty->termios->c_ospeed = 38400;
- priv->flags.termios_initialized = 1;
- }
- spin_unlock_irqrestore(&priv->lock, flags);
-
cflag = tty->termios->c_cflag;
spin_lock_irqsave(&priv->lock, flags);
@@ -566,8 +564,7 @@ static void oti6858_set_termios(struct tty_struct *tty,
spin_unlock_irqrestore(&priv->lock, flags);
}
-static int oti6858_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct oti6858_private *priv = usb_get_serial_port_data(port);
struct ktermios tmp_termios;
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 3e86815b270..a63ea99936f 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -691,8 +691,7 @@ static void pl2303_close(struct usb_serial_port *port)
}
-static int pl2303_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct ktermios tmp_termios;
struct usb_serial *serial = port->serial;
@@ -714,8 +713,6 @@ static int pl2303_open(struct tty_struct *tty,
if (tty)
pl2303_set_termios(tty, port, &tmp_termios);
- /* FIXME: need to assert RTS and DTR if CRTSCTS off */
-
dbg("%s - submitting read urb", __func__);
port->read_urb->dev = serial->dev;
result = usb_submit_urb(port->read_urb, GFP_KERNEL);
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index f48d05e0acc..55391bbe123 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -734,8 +734,7 @@ static void sierra_close(struct usb_serial_port *port)
}
}
-static int sierra_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static int sierra_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct sierra_port_private *portdata;
struct usb_serial *serial = port->serial;
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 3c249d8e8b8..61e7c40b94f 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -299,7 +299,6 @@ struct spcp8x5_private {
wait_queue_head_t delta_msr_wait;
u8 line_control;
u8 line_status;
- u8 termios_initialized;
};
/* desc : when device plug in,this function would be called.
@@ -498,6 +497,15 @@ static void spcp8x5_close(struct usb_serial_port *port)
dev_dbg(&port->dev, "usb_unlink_urb(read_urb) = %d\n", result);
}
+static void spcp8x5_init_termios(struct tty_struct *tty)
+{
+ /* for the 1st time call this function */
+ *(tty->termios) = tty_std_termios;
+ tty->termios->c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
+ tty->termios->c_ispeed = 115200;
+ tty->termios->c_ospeed = 115200;
+}
+
/* set the serial param for transfer. we should check if we really need to
* transfer. if we set flow control we should do this too. */
static void spcp8x5_set_termios(struct tty_struct *tty,
@@ -514,16 +522,6 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
int i;
u8 control;
- /* for the 1st time call this function */
- spin_lock_irqsave(&priv->lock, flags);
- if (!priv->termios_initialized) {
- *(tty->termios) = tty_std_termios;
- tty->termios->c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
- tty->termios->c_ispeed = 115200;
- tty->termios->c_ospeed = 115200;
- priv->termios_initialized = 1;
- }
- spin_unlock_irqrestore(&priv->lock, flags);
/* check that they really want us to change something */
if (!tty_termios_hw_change(tty->termios, old_termios))
@@ -623,8 +621,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
/* open the serial port. do some usb system call. set termios and get the line
* status of the device. then submit the read urb */
-static int spcp8x5_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct ktermios tmp_termios;
struct usb_serial *serial = port->serial;
@@ -658,8 +655,6 @@ static int spcp8x5_open(struct tty_struct *tty,
priv->line_status = status & 0xf0 ;
spin_unlock_irqrestore(&priv->lock, flags);
- /* FIXME: need to assert RTS and DTR if CRTSCTS off */
-
dbg("%s - submitting read urb", __func__);
port->read_urb->dev = serial->dev;
ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
@@ -1011,6 +1006,7 @@ static struct usb_serial_driver spcp8x5_device = {
.carrier_raised = spcp8x5_carrier_raised,
.write = spcp8x5_write,
.set_termios = spcp8x5_set_termios,
+ .init_termios = spcp8x5_init_termios,
.ioctl = spcp8x5_ioctl,
.tiocmget = spcp8x5_tiocmget,
.tiocmset = spcp8x5_tiocmset,
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index 6157fac9366..cb7e95f9fcb 100644
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -124,8 +124,7 @@ exit:
spin_unlock(&priv->lock);
}
-static int symbol_open(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp)
+static int symbol_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct symbol_private *priv = usb_get_serial_data(port->serial);
unsigned long flags;
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 3bc609fe224..1e9dc882169 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -98,8 +98,7 @@ struct ti_device {
static int ti_startup(struct usb_serial *serial);
static void ti_release(struct usb_serial *serial);
-static int ti_open(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *file);
+static int ti_open(struct tty_struct *tty, struct usb_serial_port *port);
static void ti_close(struct usb_serial_port *port);
static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *data, int count);
@@ -492,8 +491,7 @@ static void ti_release(struct usb_serial *serial)
}
-static int ti_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *file)
+static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct ti_port *tport = usb_get_serial_port_data(port);
struct ti_device *tdev;
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 99188c92068..9d7ca4868d3 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -43,8 +43,6 @@
#define DRIVER_AUTHOR "Greg Kroah-Hartman, greg@kroah.com, http://www.kroah.com/linux/"
#define DRIVER_DESC "USB Serial Driver core"
-static void port_free(struct usb_serial_port *port);
-
/* Driver structure we register with the USB core */
static struct usb_driver usb_serial_driver = {
.name = "usbserial",
@@ -68,6 +66,11 @@ static struct usb_serial *serial_table[SERIAL_TTY_MINORS];
static DEFINE_MUTEX(table_lock);
static LIST_HEAD(usb_serial_driver_list);
+/*
+ * Look up the serial structure. If it is found and it hasn't been
+ * disconnected, return with its disc_mutex held and its refcount
+ * incremented. Otherwise return NULL.
+ */
struct usb_serial *usb_serial_get_by_index(unsigned index)
{
struct usb_serial *serial;
@@ -75,8 +78,15 @@ struct usb_serial *usb_serial_get_by_index(unsigned index)
mutex_lock(&table_lock);
serial = serial_table[index];
- if (serial)
- kref_get(&serial->kref);
+ if (serial) {
+ mutex_lock(&serial->disc_mutex);
+ if (serial->disconnected) {
+ mutex_unlock(&serial->disc_mutex);
+ serial = NULL;
+ } else {
+ kref_get(&serial->kref);
+ }
+ }
mutex_unlock(&table_lock);
return serial;
}
@@ -125,8 +135,10 @@ static void return_serial(struct usb_serial *serial)
dbg("%s", __func__);
+ mutex_lock(&table_lock);
for (i = 0; i < serial->num_ports; ++i)
serial_table[serial->minor + i] = NULL;
+ mutex_unlock(&table_lock);
}
static void destroy_serial(struct kref *kref)
@@ -145,161 +157,157 @@ static void destroy_serial(struct kref *kref)
serial->type->release(serial);
- for (i = 0; i < serial->num_ports; ++i) {
+ /* Now that nothing is using the ports, they can be freed */
+ for (i = 0; i < serial->num_port_pointers; ++i) {
port = serial->port[i];
- if (port)
+ if (port) {
+ port->serial = NULL;
put_device(&port->dev);
- }
-
- /* If this is a "fake" port, we have to clean it up here, as it will
- * not get cleaned up in port_release() as it was never registered with
- * the driver core */
- if (serial->num_ports < serial->num_port_pointers) {
- for (i = serial->num_ports;
- i < serial->num_port_pointers; ++i) {
- port = serial->port[i];
- if (port)
- port_free(port);
}
}
usb_put_dev(serial->dev);
-
- /* free up any memory that we allocated */
kfree(serial);
}
void usb_serial_put(struct usb_serial *serial)
{
- mutex_lock(&table_lock);
kref_put(&serial->kref, destroy_serial);
- mutex_unlock(&table_lock);
}
/*****************************************************************************
* Driver tty interface functions
*****************************************************************************/
-static int serial_open (struct tty_struct *tty, struct file *filp)
+
+/**
+ * serial_install - install tty
+ * @driver: the driver (USB in our case)
+ * @tty: the tty being created
+ *
+ * Create the termios objects for this tty. We use the default
+ * USB serial settings but permit them to be overridden by
+ * serial->type->init_termios.
+ *
+ * This is the first place a new tty gets used. Hence this is where we
+ * acquire references to the usb_serial structure and the driver module,
+ * where we store a pointer to the port, and where we do an autoresume.
+ * All these actions are reversed in serial_release().
+ */
+static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
{
+ int idx = tty->index;
struct usb_serial *serial;
struct usb_serial_port *port;
- unsigned int portNumber;
- int retval = 0;
- int first = 0;
+ int retval = -ENODEV;
dbg("%s", __func__);
- /* get the serial object associated with this tty pointer */
- serial = usb_serial_get_by_index(tty->index);
- if (!serial) {
- tty->driver_data = NULL;
- return -ENODEV;
- }
+ serial = usb_serial_get_by_index(idx);
+ if (!serial)
+ return retval;
- mutex_lock(&serial->disc_mutex);
- portNumber = tty->index - serial->minor;
- port = serial->port[portNumber];
- if (!port || serial->disconnected)
- retval = -ENODEV;
- else
- get_device(&port->dev);
- /*
- * Note: Our locking order requirement does not allow port->mutex
- * to be acquired while serial->disc_mutex is held.
- */
- mutex_unlock(&serial->disc_mutex);
+ port = serial->port[idx - serial->minor];
+ if (!port)
+ goto error_no_port;
+ if (!try_module_get(serial->type->driver.owner))
+ goto error_module_get;
+
+ /* perform the standard setup */
+ retval = tty_init_termios(tty);
if (retval)
- goto bailout_serial_put;
+ goto error_init_termios;
- if (mutex_lock_interruptible(&port->mutex)) {
- retval = -ERESTARTSYS;
- goto bailout_port_put;
- }
+ retval = usb_autopm_get_interface(serial->interface);
+ if (retval)
+ goto error_get_interface;
+
+ mutex_unlock(&serial->disc_mutex);
- ++port->port.count;
+ /* allow the driver to update the settings */
+ if (serial->type->init_termios)
+ serial->type->init_termios(tty);
- /* set up our port structure making the tty driver
- * remember our port object, and us it */
tty->driver_data = port;
- tty_port_tty_set(&port->port, tty);
- /* If the console is attached, the device is already open */
- if (port->port.count == 1 && !port->console) {
- first = 1;
- /* lock this module before we call it
- * this may fail, which means we must bail out,
- * safe because we are called with BKL held */
- if (!try_module_get(serial->type->driver.owner)) {
- retval = -ENODEV;
- goto bailout_mutex_unlock;
- }
+ /* Final install (we use the default method) */
+ tty_driver_kref_get(driver);
+ tty->count++;
+ driver->ttys[idx] = tty;
+ return retval;
+ error_get_interface:
+ error_init_termios:
+ module_put(serial->type->driver.owner);
+ error_module_get:
+ error_no_port:
+ usb_serial_put(serial);
+ mutex_unlock(&serial->disc_mutex);
+ return retval;
+}
+
+static int serial_open(struct tty_struct *tty, struct file *filp)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct usb_serial *serial = port->serial;
+ int retval;
+
+ dbg("%s - port %d", __func__, port->number);
+
+ spin_lock_irq(&port->port.lock);
+ if (!tty_hung_up_p(filp))
+ ++port->port.count;
+ spin_unlock_irq(&port->port.lock);
+ tty_port_tty_set(&port->port, tty);
+
+ /* Do the device-specific open only if the hardware isn't
+ * already initialized.
+ */
+ if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags)) {
+ if (mutex_lock_interruptible(&port->mutex))
+ return -ERESTARTSYS;
mutex_lock(&serial->disc_mutex);
if (serial->disconnected)
retval = -ENODEV;
else
- retval = usb_autopm_get_interface(serial->interface);
- if (retval)
- goto bailout_module_put;
-
- /* only call the device specific open if this
- * is the first time the port is opened */
- retval = serial->type->open(tty, port, filp);
- if (retval)
- goto bailout_interface_put;
+ retval = port->serial->type->open(tty, port);
mutex_unlock(&serial->disc_mutex);
+ mutex_unlock(&port->mutex);
+ if (retval)
+ return retval;
set_bit(ASYNCB_INITIALIZED, &port->port.flags);
}
- mutex_unlock(&port->mutex);
+
/* Now do the correct tty layer semantics */
retval = tty_port_block_til_ready(&port->port, tty, filp);
- if (retval == 0) {
- if (!first)
- usb_serial_put(serial);
- return 0;
- }
- mutex_lock(&port->mutex);
- if (first == 0)
- goto bailout_mutex_unlock;
- /* Undo the initial port actions */
- mutex_lock(&serial->disc_mutex);
-bailout_interface_put:
- usb_autopm_put_interface(serial->interface);
-bailout_module_put:
- mutex_unlock(&serial->disc_mutex);
- module_put(serial->type->driver.owner);
-bailout_mutex_unlock:
- port->port.count = 0;
- tty->driver_data = NULL;
- tty_port_tty_set(&port->port, NULL);
- mutex_unlock(&port->mutex);
-bailout_port_put:
- put_device(&port->dev);
-bailout_serial_put:
- usb_serial_put(serial);
return retval;
}
/**
- * serial_do_down - shut down hardware
- * @port: port to shut down
- *
- * Shut down a USB port unless it is the console. We never shut down the
- * console hardware as it will always be in use.
+ * serial_down - shut down hardware
+ * @port: port to shut down
*
- * Don't free any resources at this point
+ * Shut down a USB serial port unless it is the console. We never
+ * shut down the console hardware as it will always be in use.
*/
-static void serial_do_down(struct usb_serial_port *port)
+static void serial_down(struct usb_serial_port *port)
{
struct usb_serial_driver *drv = port->serial->type;
struct usb_serial *serial;
struct module *owner;
- /* The console is magical, do not hang up the console hardware
- or there will be tears */
+ /*
+ * The console is magical. Do not hang up the console hardware
+ * or there will be tears.
+ */
if (port->console)
return;
+ /* Don't call the close method if the hardware hasn't been
+ * initialized.
+ */
+ if (!test_and_clear_bit(ASYNCB_INITIALIZED, &port->port.flags))
+ return;
+
mutex_lock(&port->mutex);
serial = port->serial;
owner = serial->type->driver.owner;
@@ -310,79 +318,69 @@ static void serial_do_down(struct usb_serial_port *port)
mutex_unlock(&port->mutex);
}
-/**
- * serial_do_free - free resources post close/hangup
- * @port: port to free up
- *
- * Do the resource freeing and refcount dropping for the port. We must
- * be careful about ordering and we must avoid freeing up the console.
- */
-
-static void serial_do_free(struct usb_serial_port *port)
+static void serial_hangup(struct tty_struct *tty)
{
- struct usb_serial *serial;
- struct module *owner;
+ struct usb_serial_port *port = tty->driver_data;
- /* The console is magical, do not hang up the console hardware
- or there will be tears */
- if (port->console)
- return;
+ dbg("%s - port %d", __func__, port->number);
- serial = port->serial;
- owner = serial->type->driver.owner;
- put_device(&port->dev);
- /* Mustn't dereference port any more */
- mutex_lock(&serial->disc_mutex);
- if (!serial->disconnected)
- usb_autopm_put_interface(serial->interface);
- mutex_unlock(&serial->disc_mutex);
- usb_serial_put(serial);
- /* Mustn't dereference serial any more */
- module_put(owner);
+ serial_down(port);
+ tty_port_hangup(&port->port);
}
static void serial_close(struct tty_struct *tty, struct file *filp)
{
struct usb_serial_port *port = tty->driver_data;
- if (!port)
- return;
-
dbg("%s - port %d", __func__, port->number);
- /* FIXME:
- This leaves a very narrow race. Really we should do the
- serial_do_free() on tty->shutdown(), but tty->shutdown can
- be called from IRQ context and serial_do_free can sleep.
-
- The right fix is probably to make the tty free (which is rare)
- and thus tty->shutdown() occur via a work queue and simplify all
- the drivers that use it.
- */
- if (tty_hung_up_p(filp)) {
- /* serial_hangup already called serial_down at this point.
- Another user may have already reopened the port but
- serial_do_free is refcounted */
- serial_do_free(port);
+ if (tty_hung_up_p(filp))
return;
- }
-
if (tty_port_close_start(&port->port, tty, filp) == 0)
return;
-
- serial_do_down(port);
+ serial_down(port);
tty_port_close_end(&port->port, tty);
tty_port_tty_set(&port->port, NULL);
- serial_do_free(port);
}
-static void serial_hangup(struct tty_struct *tty)
+/**
+ * serial_release - free resources post close/hangup
+ * @port: port to free up
+ *
+ * Do the resource freeing and refcount dropping for the port.
+ * Avoid freeing the console.
+ *
+ * Called when the last tty kref is dropped.
+ */
+static void serial_release(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
- serial_do_down(port);
- tty_port_hangup(&port->port);
- /* We must not free port yet - the USB serial layer depends on it's
- continued existence */
+ struct usb_serial *serial;
+ struct module *owner;
+
+ /* The console is magical. Do not hang up the console hardware
+ * or there will be tears.
+ */
+ if (port->console)
+ return;
+
+ dbg("%s - port %d", __func__, port->number);
+
+ /* Standard shutdown processing */
+ tty_shutdown(tty);
+
+ tty->driver_data = NULL;
+
+ serial = port->serial;
+ owner = serial->type->driver.owner;
+
+ mutex_lock(&serial->disc_mutex);
+ if (!serial->disconnected)
+ usb_autopm_put_interface(serial->interface);
+ mutex_unlock(&serial->disc_mutex);
+
+ usb_serial_put(serial);
+ module_put(owner);
}
static int serial_write(struct tty_struct *tty, const unsigned char *buf,
@@ -527,6 +525,7 @@ static int serial_proc_show(struct seq_file *m, void *v)
seq_putc(m, '\n');
usb_serial_put(serial);
+ mutex_unlock(&serial->disc_mutex);
}
return 0;
}
@@ -596,14 +595,6 @@ static void usb_serial_port_work(struct work_struct *work)
tty_kref_put(tty);
}
-static void port_release(struct device *dev)
-{
- struct usb_serial_port *port = to_usb_serial_port(dev);
-
- dbg ("%s - %s", __func__, dev_name(dev));
- port_free(port);
-}
-
static void kill_traffic(struct usb_serial_port *port)
{
usb_kill_urb(port->read_urb);
@@ -623,8 +614,12 @@ static void kill_traffic(struct usb_serial_port *port)
usb_kill_urb(port->interrupt_out_urb);
}
-static void port_free(struct usb_serial_port *port)
+static void port_release(struct device *dev)
{
+ struct usb_serial_port *port = to_usb_serial_port(dev);
+
+ dbg ("%s - %s", __func__, dev_name(dev));
+
/*
* Stop all the traffic before cancelling the work, so that
* nobody will restart it by calling usb_serial_port_softint.
@@ -935,6 +930,11 @@ int usb_serial_probe(struct usb_interface *interface,
mutex_init(&port->mutex);
INIT_WORK(&port->work, usb_serial_port_work);
serial->port[i] = port;
+ port->dev.parent = &interface->dev;
+ port->dev.driver = NULL;
+ port->dev.bus = &usb_serial_bus_type;
+ port->dev.release = &port_release;
+ device_initialize(&port->dev);
}
/* set up the endpoint information */
@@ -1077,15 +1077,10 @@ int usb_serial_probe(struct usb_interface *interface,
/* register all of the individual ports with the driver core */
for (i = 0; i < num_ports; ++i) {
port = serial->port[i];
- port->dev.parent = &interface->dev;
- port->dev.driver = NULL;
- port->dev.bus = &usb_serial_bus_type;
- port->dev.release = &port_release;
-
dev_set_name(&port->dev, "ttyUSB%d", port->number);
dbg ("%s - registering %s", __func__, dev_name(&port->dev));
port->dev_state = PORT_REGISTERING;
- retval = device_register(&port->dev);
+ retval = device_add(&port->dev);
if (retval) {
dev_err(&port->dev, "Error registering port device, "
"continuing\n");
@@ -1103,39 +1098,7 @@ exit:
return 0;
probe_error:
- for (i = 0; i < num_bulk_in; ++i) {
- port = serial->port[i];
- if (!port)
- continue;
- usb_free_urb(port->read_urb);
- kfree(port->bulk_in_buffer);
- }
- for (i = 0; i < num_bulk_out; ++i) {
- port = serial->port[i];
- if (!port)
- continue;
- usb_free_urb(port->write_urb);
- kfree(port->bulk_out_buffer);
- }
- for (i = 0; i < num_interrupt_in; ++i) {
- port = serial->port[i];
- if (!port)
- continue;
- usb_free_urb(port->interrupt_in_urb);
- kfree(port->interrupt_in_buffer);
- }
- for (i = 0; i < num_interrupt_out; ++i) {
- port = serial->port[i];
- if (!port)
- continue;
- usb_free_urb(port->interrupt_out_urb);
- kfree(port->interrupt_out_buffer);
- }
-
- /* free up any memory that we allocated */
- for (i = 0; i < serial->num_port_pointers; ++i)
- kfree(serial->port[i]);
- kfree(serial);
+ usb_serial_put(serial);
return -EIO;
}
EXPORT_SYMBOL_GPL(usb_serial_probe);
@@ -1161,10 +1124,7 @@ void usb_serial_disconnect(struct usb_interface *interface)
if (port) {
struct tty_struct *tty = tty_port_tty_get(&port->port);
if (tty) {
- /* The hangup will occur asynchronously but
- the object refcounts will sort out all the
- cleanup */
- tty_hangup(tty);
+ tty_vhangup(tty);
tty_kref_put(tty);
}
kill_traffic(port);
@@ -1189,8 +1149,7 @@ void usb_serial_disconnect(struct usb_interface *interface)
}
serial->type->disconnect(serial);
- /* let the last holder of this object
- * cause it to be cleaned up */
+ /* let the last holder of this object cause it to be cleaned up */
usb_serial_put(serial);
dev_info(dev, "device disconnected\n");
}
@@ -1246,6 +1205,8 @@ static const struct tty_operations serial_ops = {
.chars_in_buffer = serial_chars_in_buffer,
.tiocmget = serial_tiocmget,
.tiocmset = serial_tiocmset,
+ .shutdown = serial_release,
+ .install = serial_install,
.proc_fops = &serial_proc_fops,
};
diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c
index 614800972dc..7b5bfc4edd3 100644
--- a/drivers/usb/serial/usb_debug.c
+++ b/drivers/usb/serial/usb_debug.c
@@ -43,11 +43,10 @@ static struct usb_driver debug_driver = {
.no_dynamic_id = 1,
};
-static int usb_debug_open(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp)
+static int usb_debug_open(struct tty_struct *tty, struct usb_serial_port *port)
{
port->bulk_out_size = USB_DEBUG_MAX_PACKET_SIZE;
- return usb_serial_generic_open(tty, port, filp);
+ return usb_serial_generic_open(tty, port);
}
/* This HW really does not support a serial break, so one will be
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index f5d0f64dcc5..1aa5d20a5d9 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -36,8 +36,7 @@
#define DRIVER_DESC "USB HandSpring Visor / Palm OS driver"
/* function prototypes for a handspring visor */
-static int visor_open(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp);
+static int visor_open(struct tty_struct *tty, struct usb_serial_port *port);
static void visor_close(struct usb_serial_port *port);
static int visor_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count);
@@ -273,8 +272,7 @@ static int stats;
/******************************************************************************
* Handspring Visor specific driver functions
******************************************************************************/
-static int visor_open(struct tty_struct *tty, struct usb_serial_port *port,
- struct file *filp)
+static int visor_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
struct visor_private *priv = usb_get_serial_port_data(port);
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 8d126dd7a02..62424eec33e 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -146,7 +146,7 @@ static int whiteheat_firmware_attach(struct usb_serial *serial);
static int whiteheat_attach(struct usb_serial *serial);
static void whiteheat_release(struct usb_serial *serial);
static int whiteheat_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp);
+ struct usb_serial_port *port);
static void whiteheat_close(struct usb_serial_port *port);
static int whiteheat_write(struct tty_struct *tty,
struct usb_serial_port *port,
@@ -259,7 +259,7 @@ static int firm_send_command(struct usb_serial_port *port, __u8 command,
__u8 *data, __u8 datasize);
static int firm_open(struct usb_serial_port *port);
static int firm_close(struct usb_serial_port *port);
-static int firm_setup_port(struct tty_struct *tty);
+static void firm_setup_port(struct tty_struct *tty);
static int firm_set_rts(struct usb_serial_port *port, __u8 onoff);
static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff);
static int firm_set_break(struct usb_serial_port *port, __u8 onoff);
@@ -659,8 +659,7 @@ static void whiteheat_release(struct usb_serial *serial)
return;
}
-static int whiteheat_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp)
+static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port)
{
int retval = 0;
@@ -1211,7 +1210,7 @@ static int firm_close(struct usb_serial_port *port)
}
-static int firm_setup_port(struct tty_struct *tty)
+static void firm_setup_port(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct whiteheat_port_settings port_settings;
@@ -1286,7 +1285,7 @@ static int firm_setup_port(struct tty_struct *tty)
port_settings.lloop = 0;
/* now send the message to the device */
- return firm_send_command(port, WHITEHEAT_SETUP_PORT,
+ firm_send_command(port, WHITEHEAT_SETUP_PORT,
(__u8 *)&port_settings, sizeof(port_settings));
}
diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h
index 1fbdea4f08e..a5049eaf782 100644
--- a/include/linux/cyclades.h
+++ b/include/linux/cyclades.h
@@ -499,6 +499,7 @@ struct cyclades_card {
void __iomem *p9050;
struct RUNTIME_9060 __iomem *p9060;
} ctl_addr;
+ struct BOARD_CTRL __iomem *board_ctrl; /* cyz specific */
int irq;
unsigned int num_chips; /* 0 if card absent, -1 if Z/PCI, else Y */
unsigned int first_line; /* minor number of first channel on card */
@@ -541,6 +542,15 @@ struct cyclades_port {
int magic;
struct tty_port port;
struct cyclades_card *card;
+ union {
+ struct {
+ void __iomem *base_addr;
+ } cyy;
+ struct {
+ struct CH_CTRL __iomem *ch_ctrl;
+ struct BUF_CTRL __iomem *buf_ctrl;
+ } cyz;
+ } u;
int line;
int flags; /* defined in tty.h */
int type; /* UART type */
@@ -568,7 +578,6 @@ struct cyclades_port {
struct cyclades_idle_stats idle_stats;
struct cyclades_icount icount;
struct completion shutdown_wait;
- wait_queue_head_t delta_msr_wait;
int throttle;
};
diff --git a/include/linux/hayesesp.h b/include/linux/hayesesp.h
index 940aeb51d53..92b08cfe4a7 100644
--- a/include/linux/hayesesp.h
+++ b/include/linux/hayesesp.h
@@ -96,7 +96,6 @@ struct esp_struct {
int xmit_head;
int xmit_tail;
int xmit_cnt;
- wait_queue_head_t delta_msr_wait;
wait_queue_head_t break_wait;
struct async_icount icount; /* kernel counters for the 4 input interrupts */
struct hayes_esp_config config; /* port configuration */
diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h
index 29f62e1733f..ad6bdf5a597 100644
--- a/include/linux/kfifo.h
+++ b/include/linux/kfifo.h
@@ -38,7 +38,7 @@ extern struct kfifo *kfifo_alloc(unsigned int size, gfp_t gfp_mask,
spinlock_t *lock);
extern void kfifo_free(struct kfifo *fifo);
extern unsigned int __kfifo_put(struct kfifo *fifo,
- unsigned char *buffer, unsigned int len);
+ const unsigned char *buffer, unsigned int len);
extern unsigned int __kfifo_get(struct kfifo *fifo,
unsigned char *buffer, unsigned int len);
@@ -77,7 +77,7 @@ static inline void kfifo_reset(struct kfifo *fifo)
* bytes copied.
*/
static inline unsigned int kfifo_put(struct kfifo *fifo,
- unsigned char *buffer, unsigned int len)
+ const unsigned char *buffer, unsigned int len)
{
unsigned long flags;
unsigned int ret;
diff --git a/include/linux/serial.h b/include/linux/serial.h
index e5bb75a6380..c8613c3ff9d 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -122,6 +122,7 @@ struct serial_uart_config {
/* Internal flags used only by kernel */
#define ASYNCB_INITIALIZED 31 /* Serial port was initialized */
+#define ASYNCB_SUSPENDED 30 /* Serial port is suspended */
#define ASYNCB_NORMAL_ACTIVE 29 /* Normal device is active */
#define ASYNCB_BOOT_AUTOCONF 28 /* Autoconfigure port on bootup */
#define ASYNCB_CLOSING 27 /* Serial port is closing */
@@ -133,6 +134,7 @@ struct serial_uart_config {
#define ASYNCB_FIRST_KERNEL 22
#define ASYNC_HUP_NOTIFY (1U << ASYNCB_HUP_NOTIFY)
+#define ASYNC_SUSPENDED (1U << ASYNCB_SUSPENDED)
#define ASYNC_FOURPORT (1U << ASYNCB_FOURPORT)
#define ASYNC_SAK (1U << ASYNCB_SAK)
#define ASYNC_SPLIT_TERMIOS (1U << ASYNCB_SPLIT_TERMIOS)
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index d4d2a78ad43..fb46aba11fb 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -22,6 +22,7 @@ struct plat_serial8250_port {
void __iomem *membase; /* ioremap cookie or NULL */
resource_size_t mapbase; /* resource base */
unsigned int irq; /* interrupt number */
+ unsigned long irqflags; /* request_irq flags */
unsigned int uartclk; /* UART clock rate */
void *private_data;
unsigned char regshift; /* register shift */
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 23d2fb051f9..d58e460844d 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -20,6 +20,8 @@
#ifndef LINUX_SERIAL_CORE_H
#define LINUX_SERIAL_CORE_H
+#include <linux/serial.h>
+
/*
* The type definitions. These are from Ted Ts'o's serial.h
*/
@@ -186,7 +188,6 @@
#include <linux/sysrq.h>
struct uart_port;
-struct uart_info;
struct serial_struct;
struct device;
@@ -265,6 +266,7 @@ struct uart_port {
unsigned int (*serial_in)(struct uart_port *, int);
void (*serial_out)(struct uart_port *, int, int);
unsigned int irq; /* irq number */
+ unsigned long irqflags; /* irq flags */
unsigned int uartclk; /* base uart clock */
unsigned int fifosize; /* tx fifo size */
unsigned char x_char; /* xon/xoff char */
@@ -283,7 +285,7 @@ struct uart_port {
unsigned int read_status_mask; /* driver specific */
unsigned int ignore_status_mask; /* driver specific */
- struct uart_info *info; /* pointer to parent info */
+ struct uart_state *state; /* pointer to parent state */
struct uart_icount icount; /* statistics */
struct console *cons; /* struct console, if any */
@@ -335,52 +337,16 @@ struct uart_port {
};
/*
- * This is the state information which is only valid when the port
- * is open; it may be cleared the core driver once the device has
- * been closed. Either the low level driver or the core can modify
- * stuff here.
- */
-typedef unsigned int __bitwise__ uif_t;
-
-struct uart_info {
- struct tty_port port;
- struct circ_buf xmit;
- uif_t flags;
-
-/*
- * Definitions for info->flags. These are _private_ to serial_core, and
- * are specific to this structure. They may be queried by low level drivers.
- *
- * FIXME: use the ASY_ definitions
- */
-#define UIF_CHECK_CD ((__force uif_t) (1 << 25))
-#define UIF_CTS_FLOW ((__force uif_t) (1 << 26))
-#define UIF_NORMAL_ACTIVE ((__force uif_t) (1 << 29))
-#define UIF_INITIALIZED ((__force uif_t) (1 << 31))
-#define UIF_SUSPENDED ((__force uif_t) (1 << 30))
-
- struct tasklet_struct tlet;
- wait_queue_head_t delta_msr_wait;
-};
-
-/*
* This is the state information which is persistent across opens.
- * The low level driver must not to touch any elements contained
- * within.
*/
struct uart_state {
- unsigned int close_delay; /* msec */
- unsigned int closing_wait; /* msec */
-
-#define USF_CLOSING_WAIT_INF (0)
-#define USF_CLOSING_WAIT_NONE (~0U)
+ struct tty_port port;
- int count;
int pm_state;
- struct uart_info info;
- struct uart_port *port;
+ struct circ_buf xmit;
- struct mutex mutex;
+ struct tasklet_struct tlet;
+ struct uart_port *uart_port;
};
#define UART_XMIT_SIZE PAGE_SIZE
@@ -461,7 +427,7 @@ int uart_resume_port(struct uart_driver *reg, struct uart_port *port);
static inline int uart_tx_stopped(struct uart_port *port)
{
- struct tty_struct *tty = port->info->port.tty;
+ struct tty_struct *tty = port->state->port.tty;
if(tty->stopped || tty->hw_stopped)
return 1;
return 0;
@@ -476,7 +442,7 @@ uart_handle_sysrq_char(struct uart_port *port, unsigned int ch)
#ifdef SUPPORT_SYSRQ
if (port->sysrq) {
if (ch && time_before(jiffies, port->sysrq)) {
- handle_sysrq(ch, port->info->port.tty);
+ handle_sysrq(ch, port->state->port.tty);
port->sysrq = 0;
return 1;
}
@@ -494,7 +460,7 @@ uart_handle_sysrq_char(struct uart_port *port, unsigned int ch)
*/
static inline int uart_handle_break(struct uart_port *port)
{
- struct uart_info *info = port->info;
+ struct uart_state *state = port->state;
#ifdef SUPPORT_SYSRQ
if (port->cons && port->cons->index == port->line) {
if (!port->sysrq) {
@@ -505,7 +471,7 @@ static inline int uart_handle_break(struct uart_port *port)
}
#endif
if (port->flags & UPF_SAK)
- do_SAK(info->port.tty);
+ do_SAK(state->port.tty);
return 0;
}
@@ -515,22 +481,23 @@ static inline int uart_handle_break(struct uart_port *port)
* @status: new carrier detect status, nonzero if active
*/
static inline void
-uart_handle_dcd_change(struct uart_port *port, unsigned int status)
+uart_handle_dcd_change(struct uart_port *uport, unsigned int status)
{
- struct uart_info *info = port->info;
+ struct uart_state *state = uport->state;
+ struct tty_port *port = &state->port;
- port->icount.dcd++;
+ uport->icount.dcd++;
#ifdef CONFIG_HARD_PPS
- if ((port->flags & UPF_HARDPPS_CD) && status)
+ if ((uport->flags & UPF_HARDPPS_CD) && status)
hardpps();
#endif
- if (info->flags & UIF_CHECK_CD) {
+ if (port->flags & ASYNC_CHECK_CD) {
if (status)
- wake_up_interruptible(&info->port.open_wait);
- else if (info->port.tty)
- tty_hangup(info->port.tty);
+ wake_up_interruptible(&port->open_wait);
+ else if (port->tty)
+ tty_hangup(port->tty);
}
}
@@ -540,24 +507,24 @@ uart_handle_dcd_change(struct uart_port *port, unsigned int status)
* @status: new clear to send status, nonzero if active
*/
static inline void
-uart_handle_cts_change(struct uart_port *port, unsigned int status)
+uart_handle_cts_change(struct uart_port *uport, unsigned int status)
{
- struct uart_info *info = port->info;
- struct tty_struct *tty = info->port.tty;
+ struct tty_port *port = &uport->state->port;
+ struct tty_struct *tty = port->tty;
- port->icount.cts++;
+ uport->icount.cts++;
- if (info->flags & UIF_CTS_FLOW) {
+ if (port->flags & ASYNC_CTS_FLOW) {
if (tty->hw_stopped) {
if (status) {
tty->hw_stopped = 0;
- port->ops->start_tx(port);
- uart_write_wakeup(port);
+ uport->ops->start_tx(uport);
+ uart_write_wakeup(uport);
}
} else {
if (!status) {
tty->hw_stopped = 1;
- port->ops->stop_tx(port);
+ uport->ops->stop_tx(uport);
}
}
}
@@ -569,7 +536,7 @@ static inline void
uart_insert_char(struct uart_port *port, unsigned int status,
unsigned int overrun, unsigned int ch, unsigned int flag)
{
- struct tty_struct *tty = port->info->port.tty;
+ struct tty_struct *tty = port->state->port.tty;
if ((status & port->ignore_status_mask & ~overrun) == 0)
tty_insert_flip_char(tty, ch, flag);
diff --git a/include/linux/tty.h b/include/linux/tty.h
index a916a318004..f0f43d08d8b 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -187,7 +187,12 @@ struct tty_port;
struct tty_port_operations {
/* Return 1 if the carrier is raised */
int (*carrier_raised)(struct tty_port *port);
+ /* Control the DTR line */
void (*dtr_rts)(struct tty_port *port, int raise);
+ /* Called when the last close completes or a hangup finishes
+ IFF the port was initialized. Do not use to free resources */
+ void (*shutdown)(struct tty_port *port);
+ void (*drop)(struct tty_port *port);
};
struct tty_port {
@@ -198,11 +203,12 @@ struct tty_port {
int count; /* Usage count */
wait_queue_head_t open_wait; /* Open waiters */
wait_queue_head_t close_wait; /* Close waiters */
+ wait_queue_head_t delta_msr_wait; /* Modem status change */
unsigned long flags; /* TTY flags ASY_*/
struct mutex mutex; /* Locking */
unsigned char *xmit_buf; /* Optional buffer */
- int close_delay; /* Close port delay */
- int closing_wait; /* Delay for output */
+ unsigned int close_delay; /* Close port delay */
+ unsigned int closing_wait; /* Delay for output */
int drain_delay; /* Set to zero if no pure time
based drain is needed else
set to size of fifo */
@@ -459,6 +465,12 @@ extern int tty_port_block_til_ready(struct tty_port *port,
extern int tty_port_close_start(struct tty_port *port,
struct tty_struct *tty, struct file *filp);
extern void tty_port_close_end(struct tty_port *port, struct tty_struct *tty);
+extern void tty_port_close(struct tty_port *port,
+ struct tty_struct *tty, struct file *filp);
+extern inline int tty_port_users(struct tty_port *port)
+{
+ return port->count + port->blocked_open;
+}
extern int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc);
extern int tty_unregister_ldisc(int disc);
@@ -524,5 +536,8 @@ extern int pcxe_open(struct tty_struct *tty, struct file *filp);
extern int vt_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg);
+extern long vt_compat_ioctl(struct tty_struct *tty, struct file * file,
+ unsigned int cmd, unsigned long arg);
+
#endif /* __KERNEL__ */
#endif
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 0ec50ba6213..7b85e327af9 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -238,9 +238,8 @@ struct usb_serial_driver {
int (*resume)(struct usb_serial *serial);
/* serial function calls */
- /* Called by console with tty = NULL and by tty */
- int (*open)(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp);
+ /* Called by console and by the tty layer */
+ int (*open)(struct tty_struct *tty, struct usb_serial_port *port);
void (*close)(struct usb_serial_port *port);
int (*write)(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count);
@@ -261,6 +260,9 @@ struct usb_serial_driver {
be an attached tty at this point */
void (*dtr_rts)(struct usb_serial_port *port, int on);
int (*carrier_raised)(struct usb_serial_port *port);
+ /* Called by the usb serial hooks to allow the user to rework the
+ termios state */
+ void (*init_termios)(struct tty_struct *tty);
/* USB events */
void (*read_int_callback)(struct urb *urb);
void (*write_int_callback)(struct urb *urb);
@@ -300,7 +302,7 @@ static inline void usb_serial_console_disconnect(struct usb_serial *serial) {}
extern struct usb_serial *usb_serial_get_by_index(unsigned int minor);
extern void usb_serial_put(struct usb_serial *serial);
extern int usb_serial_generic_open(struct tty_struct *tty,
- struct usb_serial_port *port, struct file *filp);
+ struct usb_serial_port *port);
extern int usb_serial_generic_write(struct tty_struct *tty,
struct usb_serial_port *port, const unsigned char *buf, int count);
extern void usb_serial_generic_close(struct usb_serial_port *port);
diff --git a/include/linux/vt.h b/include/linux/vt.h
index 02c1c028877..7afca0d7213 100644
--- a/include/linux/vt.h
+++ b/include/linux/vt.h
@@ -1,17 +1,6 @@
#ifndef _LINUX_VT_H
#define _LINUX_VT_H
-#ifdef __KERNEL__
-struct notifier_block;
-
-struct vt_notifier_param {
- struct vc_data *vc; /* VC on which the update happened */
- unsigned int c; /* Printed char */
-};
-
-extern int register_vt_notifier(struct notifier_block *nb);
-extern int unregister_vt_notifier(struct notifier_block *nb);
-#endif
/*
* These constants are also useful for user-level apps (e.g., VC
@@ -74,4 +63,25 @@ struct vt_consize {
#define VT_UNLOCKSWITCH 0x560C /* allow vt switching */
#define VT_GETHIFONTMASK 0x560D /* return hi font mask */
+struct vt_event {
+ unsigned int event;
+#define VT_EVENT_SWITCH 0x0001 /* Console switch */
+#define VT_EVENT_BLANK 0x0002 /* Screen blank */
+#define VT_EVENT_UNBLANK 0x0004 /* Screen unblank */
+#define VT_EVENT_RESIZE 0x0008 /* Resize display */
+#define VT_MAX_EVENT 0x000F
+ unsigned int old; /* Old console */
+ unsigned int new; /* New console (if changing) */
+ unsigned int pad[4]; /* Padding for expansion */
+};
+
+#define VT_WAITEVENT 0x560E /* Wait for an event */
+
+struct vt_setactivate {
+ unsigned int console;
+ struct vt_mode mode;
+};
+
+#define VT_SETACTIVATE 0x560F /* Activate and set the mode of a console */
+
#endif /* _LINUX_VT_H */
diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h
index 2f1113467f7..c0c4e1103a7 100644
--- a/include/linux/vt_kern.h
+++ b/include/linux/vt_kern.h
@@ -13,6 +13,7 @@
#include <linux/console_struct.h>
#include <linux/mm.h>
#include <linux/consolemap.h>
+#include <linux/notifier.h>
/*
* Presently, a lot of graphics programs do not restore the contents of
@@ -91,7 +92,8 @@ int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc);
#endif
/* vt.c */
-int vt_waitactive(int vt);
+void vt_event_post(unsigned int event, unsigned int old, unsigned int new);
+int vt_waitactive(int n);
void change_console(struct vc_data *new_vc);
void reset_vc(struct vc_data *vc);
extern int unbind_con_driver(const struct consw *csw, int first, int last,
@@ -116,4 +118,16 @@ struct vt_spawn_console {
};
extern struct vt_spawn_console vt_spawn_con;
+extern int vt_move_to_console(unsigned int vt, int alloc);
+
+/* Interfaces for VC notification of character events (for accessibility etc) */
+
+struct vt_notifier_param {
+ struct vc_data *vc; /* VC on which the update happened */
+ unsigned int c; /* Printed char */
+};
+
+extern int register_vt_notifier(struct notifier_block *nb);
+extern int unregister_vt_notifier(struct notifier_block *nb);
+
#endif /* _VT_KERN_H */
diff --git a/kernel/kfifo.c b/kernel/kfifo.c
index 26539e3228e..3765ff3c1bb 100644
--- a/kernel/kfifo.c
+++ b/kernel/kfifo.c
@@ -117,7 +117,7 @@ EXPORT_SYMBOL(kfifo_free);
* writer, you don't need extra locking to use these functions.
*/
unsigned int __kfifo_put(struct kfifo *fifo,
- unsigned char *buffer, unsigned int len)
+ const unsigned char *buffer, unsigned int len)
{
unsigned int l;
diff --git a/kernel/power/console.c b/kernel/power/console.c
index a3961b205de..5187136fe1d 100644
--- a/kernel/power/console.c
+++ b/kernel/power/console.c
@@ -14,56 +14,13 @@
#define SUSPEND_CONSOLE (MAX_NR_CONSOLES-1)
static int orig_fgconsole, orig_kmsg;
-static int disable_vt_switch;
-
-/*
- * Normally during a suspend, we allocate a new console and switch to it.
- * When we resume, we switch back to the original console. This switch
- * can be slow, so on systems where the framebuffer can handle restoration
- * of video registers anyways, there's little point in doing the console
- * switch. This function allows you to disable it by passing it '0'.
- */
-void pm_set_vt_switch(int do_switch)
-{
- acquire_console_sem();
- disable_vt_switch = !do_switch;
- release_console_sem();
-}
-EXPORT_SYMBOL(pm_set_vt_switch);
int pm_prepare_console(void)
{
- acquire_console_sem();
-
- if (disable_vt_switch) {
- release_console_sem();
- return 0;
- }
-
- orig_fgconsole = fg_console;
-
- if (vc_allocate(SUSPEND_CONSOLE)) {
- /* we can't have a free VC for now. Too bad,
- * we don't want to mess the screen for now. */
- release_console_sem();
+ orig_fgconsole = vt_move_to_console(SUSPEND_CONSOLE, 1);
+ if (orig_fgconsole < 0)
return 1;
- }
- if (set_console(SUSPEND_CONSOLE)) {
- /*
- * We're unable to switch to the SUSPEND_CONSOLE.
- * Let the calling function know so it can decide
- * what to do.
- */
- release_console_sem();
- return 1;
- }
- release_console_sem();
-
- if (vt_waitactive(SUSPEND_CONSOLE)) {
- pr_debug("Suspend: Can't switch VCs.");
- return 1;
- }
orig_kmsg = kmsg_redirect;
kmsg_redirect = SUSPEND_CONSOLE;
return 0;
@@ -71,19 +28,9 @@ int pm_prepare_console(void)
void pm_restore_console(void)
{
- acquire_console_sem();
- if (disable_vt_switch) {
- release_console_sem();
- return;
- }
- set_console(orig_fgconsole);
- release_console_sem();
-
- if (vt_waitactive(orig_fgconsole)) {
- pr_debug("Resume: Can't switch VCs.");
- return;
+ if (orig_fgconsole >= 0) {
+ vt_move_to_console(orig_fgconsole, 0);
+ kmsg_redirect = orig_kmsg;
}
-
- kmsg_redirect = orig_kmsg;
}
#endif