diff options
43 files changed, 3933 insertions, 339 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index f623953b579..510aa205454 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -206,6 +206,13 @@ config GPIO_SX150X 8 bits: sx1508q 16 bits: sx1509q +config GPIO_STMPE + bool "STMPE GPIOs" + depends on MFD_STMPE + help + This enables support for the GPIOs found on the STMPE I/O + Expanders. + config GPIO_TC35892 bool "TC35892 GPIOs" depends on MFD_TC35892 diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index a69e0609ff7..fc6019d9372 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_GPIO_MCP23S08) += mcp23s08.o obj-$(CONFIG_GPIO_PCA953X) += pca953x.o obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o obj-$(CONFIG_GPIO_PL061) += pl061.o +obj-$(CONFIG_GPIO_STMPE) += stmpe-gpio.o obj-$(CONFIG_GPIO_TC35892) += tc35892-gpio.o obj-$(CONFIG_GPIO_TIMBERDALE) += timbgpio.o obj-$(CONFIG_GPIO_TWL4030) += twl4030-gpio.o diff --git a/drivers/gpio/stmpe-gpio.c b/drivers/gpio/stmpe-gpio.c new file mode 100644 index 00000000000..4e1f1b9d5e6 --- /dev/null +++ b/drivers/gpio/stmpe-gpio.c @@ -0,0 +1,399 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License, version 2 + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/gpio.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/mfd/stmpe.h> + +/* + * These registers are modified under the irq bus lock and cached to avoid + * unnecessary writes in bus_sync_unlock. + */ +enum { REG_RE, REG_FE, REG_IE }; + +#define CACHE_NR_REGS 3 +#define CACHE_NR_BANKS (STMPE_NR_GPIOS / 8) + +struct stmpe_gpio { + struct gpio_chip chip; + struct stmpe *stmpe; + struct device *dev; + struct mutex irq_lock; + + int irq_base; + + /* Caches of interrupt control registers for bus_lock */ + u8 regs[CACHE_NR_REGS][CACHE_NR_BANKS]; + u8 oldregs[CACHE_NR_REGS][CACHE_NR_BANKS]; +}; + +static inline struct stmpe_gpio *to_stmpe_gpio(struct gpio_chip *chip) +{ + return container_of(chip, struct stmpe_gpio, chip); +} + +static int stmpe_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(chip); + struct stmpe *stmpe = stmpe_gpio->stmpe; + u8 reg = stmpe->regs[STMPE_IDX_GPMR_LSB] - (offset / 8); + u8 mask = 1 << (offset % 8); + int ret; + + ret = stmpe_reg_read(stmpe, reg); + if (ret < 0) + return ret; + + return ret & mask; +} + +static void stmpe_gpio_set(struct gpio_chip *chip, unsigned offset, int val) +{ + struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(chip); + struct stmpe *stmpe = stmpe_gpio->stmpe; + int which = val ? STMPE_IDX_GPSR_LSB : STMPE_IDX_GPCR_LSB; + u8 reg = stmpe->regs[which] - (offset / 8); + u8 mask = 1 << (offset % 8); + + stmpe_reg_write(stmpe, reg, mask); +} + +static int stmpe_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int val) +{ + struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(chip); + struct stmpe *stmpe = stmpe_gpio->stmpe; + u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB] - (offset / 8); + u8 mask = 1 << (offset % 8); + + stmpe_gpio_set(chip, offset, val); + + return stmpe_set_bits(stmpe, reg, mask, mask); +} + +static int stmpe_gpio_direction_input(struct gpio_chip *chip, + unsigned offset) +{ + struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(chip); + struct stmpe *stmpe = stmpe_gpio->stmpe; + u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB] - (offset / 8); + u8 mask = 1 << (offset % 8); + + return stmpe_set_bits(stmpe, reg, mask, 0); +} + +static int stmpe_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(chip); + + return stmpe_gpio->irq_base + offset; +} + +static int stmpe_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + struct stmpe_gpio *stmpe_gpio = to_stmpe_gpio(chip); + struct stmpe *stmpe = stmpe_gpio->stmpe; + + return stmpe_set_altfunc(stmpe, 1 << offset, STMPE_BLOCK_GPIO); +} + +static struct gpio_chip template_chip = { + .label = "stmpe", + .owner = THIS_MODULE, + .direction_input = stmpe_gpio_direction_input, + .get = stmpe_gpio_get, + .direction_output = stmpe_gpio_direction_output, + .set = stmpe_gpio_set, + .to_irq = stmpe_gpio_to_irq, + .request = stmpe_gpio_request, + .can_sleep = 1, +}; + +static int stmpe_gpio_irq_set_type(unsigned int irq, unsigned int type) +{ + struct stmpe_gpio *stmpe_gpio = get_irq_chip_data(irq); + int offset = irq - stmpe_gpio->irq_base; + int regoffset = offset / 8; + int mask = 1 << (offset % 8); + + if (type == IRQ_TYPE_LEVEL_LOW || type == IRQ_TYPE_LEVEL_HIGH) + return -EINVAL; + + if (type == IRQ_TYPE_EDGE_RISING) + stmpe_gpio->regs[REG_RE][regoffset] |= mask; + else + stmpe_gpio->regs[REG_RE][regoffset] &= ~mask; + + if (type == IRQ_TYPE_EDGE_FALLING) + stmpe_gpio->regs[REG_FE][regoffset] |= mask; + else + stmpe_gpio->regs[REG_FE][regoffset] &= ~mask; + + return 0; +} + +static void stmpe_gpio_irq_lock(unsigned int irq) +{ + struct stmpe_gpio *stmpe_gpio = get_irq_chip_data(irq); + + mutex_lock(&stmpe_gpio->irq_lock); +} + +static void stmpe_gpio_irq_sync_unlock(unsigned int irq) +{ + struct stmpe_gpio *stmpe_gpio = get_irq_chip_data(irq); + struct stmpe *stmpe = stmpe_gpio->stmpe; + int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8); + static const u8 regmap[] = { + [REG_RE] = STMPE_IDX_GPRER_LSB, + [REG_FE] = STMPE_IDX_GPFER_LSB, + [REG_IE] = STMPE_IDX_IEGPIOR_LSB, + }; + int i, j; + + for (i = 0; i < CACHE_NR_REGS; i++) { + for (j = 0; j < num_banks; j++) { + u8 old = stmpe_gpio->oldregs[i][j]; + u8 new = stmpe_gpio->regs[i][j]; + + if (new == old) + continue; + + stmpe_gpio->oldregs[i][j] = new; + stmpe_reg_write(stmpe, stmpe->regs[regmap[i]] - j, new); + } + } + + mutex_unlock(&stmpe_gpio->irq_lock); +} + +static void stmpe_gpio_irq_mask(unsigned int irq) +{ + struct stmpe_gpio *stmpe_gpio = get_irq_chip_data(irq); + int offset = irq - stmpe_gpio->irq_base; + int regoffset = offset / 8; + int mask = 1 << (offset % 8); + + stmpe_gpio->regs[REG_IE][regoffset] &= ~mask; +} + +static void stmpe_gpio_irq_unmask(unsigned int irq) +{ + struct stmpe_gpio *stmpe_gpio = get_irq_chip_data(irq); + int offset = irq - stmpe_gpio->irq_base; + int regoffset = offset / 8; + int mask = 1 << (offset % 8); + + stmpe_gpio->regs[REG_IE][regoffset] |= mask; +} + +static struct irq_chip stmpe_gpio_irq_chip = { + .name = "stmpe-gpio", + .bus_lock = stmpe_gpio_irq_lock, + .bus_sync_unlock = stmpe_gpio_irq_sync_unlock, + .mask = stmpe_gpio_irq_mask, + .unmask = stmpe_gpio_irq_unmask, + .set_type = stmpe_gpio_irq_set_type, +}; + +static irqreturn_t stmpe_gpio_irq(int irq, void *dev) +{ + struct stmpe_gpio *stmpe_gpio = dev; + struct stmpe *stmpe = stmpe_gpio->stmpe; + u8 statmsbreg = stmpe->regs[STMPE_IDX_ISGPIOR_MSB]; + int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8); + u8 status[num_banks]; + int ret; + int i; + + ret = stmpe_block_read(stmpe, statmsbreg, num_banks, status); + if (ret < 0) + return IRQ_NONE; + + for (i = 0; i < num_banks; i++) { + int bank = num_banks - i - 1; + unsigned int enabled = stmpe_gpio->regs[REG_IE][bank]; + unsigned int stat = status[i]; + + stat &= enabled; + if (!stat) + continue; + + while (stat) { + int bit = __ffs(stat); + int line = bank * 8 + bit; + + handle_nested_irq(stmpe_gpio->irq_base + line); + stat &= ~(1 << bit); + } + + stmpe_reg_write(stmpe, statmsbreg + i, status[i]); + stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_GPEDR_MSB] + i, + status[i]); + } + + return IRQ_HANDLED; +} + +static int __devinit stmpe_gpio_irq_init(struct stmpe_gpio *stmpe_gpio) +{ + int base = stmpe_gpio->irq_base; + int irq; + + for (irq = base; irq < base + stmpe_gpio->chip.ngpio; irq++) { + set_irq_chip_data(irq, stmpe_gpio); + set_irq_chip_and_handler(irq, &stmpe_gpio_irq_chip, + handle_simple_irq); + set_irq_nested_thread(irq, 1); +#ifdef CONFIG_ARM + set_irq_flags(irq, IRQF_VALID); +#else + set_irq_noprobe(irq); +#endif + } + + return 0; +} + +static void stmpe_gpio_irq_remove(struct stmpe_gpio *stmpe_gpio) +{ + int base = stmpe_gpio->irq_base; + int irq; + + for (irq = base; irq < base + stmpe_gpio->chip.ngpio; irq++) { +#ifdef CONFIG_ARM + set_irq_flags(irq, 0); +#endif + set_irq_chip_and_handler(irq, NULL, NULL); + set_irq_chip_data(irq, NULL); + } +} + +static int __devinit stmpe_gpio_probe(struct platform_device *pdev) +{ + struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent); + struct stmpe_gpio_platform_data *pdata; + struct stmpe_gpio *stmpe_gpio; + int ret; + int irq; + + pdata = stmpe->pdata->gpio; + if (!pdata) + return -ENODEV; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + stmpe_gpio = kzalloc(sizeof(struct stmpe_gpio), GFP_KERNEL); + if (!stmpe_gpio) + return -ENOMEM; + + mutex_init(&stmpe_gpio->irq_lock); + + stmpe_gpio->dev = &pdev->dev; + stmpe_gpio->stmpe = stmpe; + + stmpe_gpio->chip = template_chip; + stmpe_gpio->chip.ngpio = stmpe->num_gpios; + stmpe_gpio->chip.dev = &pdev->dev; + stmpe_gpio->chip.base = pdata ? pdata->gpio_base : -1; + + stmpe_gpio->irq_base = stmpe->irq_base + STMPE_INT_GPIO(0); + + ret = stmpe_enable(stmpe, STMPE_BLOCK_GPIO); + if (ret) + return ret; + + ret = stmpe_gpio_irq_init(stmpe_gpio); + if (ret) + goto out_free; + + ret = request_threaded_irq(irq, NULL, stmpe_gpio_irq, IRQF_ONESHOT, + "stmpe-gpio", stmpe_gpio); + if (ret) { + dev_err(&pdev->dev, "unable to get irq: %d\n", ret); + goto out_removeirq; + } + + ret = gpiochip_add(&stmpe_gpio->chip); + if (ret) { + dev_err(&pdev->dev, "unable to add gpiochip: %d\n", ret); + goto out_freeirq; + } + + if (pdata && pdata->setup) + pdata->setup(stmpe, stmpe_gpio->chip.base); + + platform_set_drvdata(pdev, stmpe_gpio); + + return 0; + +out_freeirq: + free_irq(irq, stmpe_gpio); +out_removeirq: + stmpe_gpio_irq_remove(stmpe_gpio); +out_free: + kfree(stmpe_gpio); + return ret; +} + +static int __devexit stmpe_gpio_remove(struct platform_device *pdev) +{ + struct stmpe_gpio *stmpe_gpio = platform_get_drvdata(pdev); + struct stmpe *stmpe = stmpe_gpio->stmpe; + struct stmpe_gpio_platform_data *pdata = stmpe->pdata->gpio; + int irq = platform_get_irq(pdev, 0); + int ret; + + if (pdata && pdata->remove) + pdata->remove(stmpe, stmpe_gpio->chip.base); + + ret = gpiochip_remove(&stmpe_gpio->chip); + if (ret < 0) { + dev_err(stmpe_gpio->dev, + "unable to remove gpiochip: %d\n", ret); + return ret; + } + + stmpe_disable(stmpe, STMPE_BLOCK_GPIO); + + free_irq(irq, stmpe_gpio); + stmpe_gpio_irq_remove(stmpe_gpio); + platform_set_drvdata(pdev, NULL); + kfree(stmpe_gpio); + + return 0; +} + +static struct platform_driver stmpe_gpio_driver = { + .driver.name = "stmpe-gpio", + .driver.owner = THIS_MODULE, + .probe = stmpe_gpio_probe, + .remove = __devexit_p(stmpe_gpio_remove), +}; + +static int __init stmpe_gpio_init(void) +{ + return platform_driver_register(&stmpe_gpio_driver); +} +subsys_initcall(stmpe_gpio_init); + +static void __exit stmpe_gpio_exit(void) +{ + platform_driver_unregister(&stmpe_gpio_driver); +} +module_exit(stmpe_gpio_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("STMPExxxx GPIO driver"); +MODULE_AUTHOR("Rabin Vincent <rabin.vincent@stericsson.com>"); diff --git a/drivers/gpio/wm831x-gpio.c b/drivers/gpio/wm831x-gpio.c index 1fa449a1a4c..309644cf4d9 100644 --- a/drivers/gpio/wm831x-gpio.c +++ b/drivers/gpio/wm831x-gpio.c @@ -108,6 +108,37 @@ static int wm831x_gpio_to_irq(struct gpio_chip *chip, unsigned offset) return wm831x->irq_base + WM831X_IRQ_GPIO_1 + offset; } +static int wm831x_gpio_set_debounce(struct gpio_chip *chip, unsigned offset, + unsigned debounce) +{ + struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip); + struct wm831x *wm831x = wm831x_gpio->wm831x; + int reg = WM831X_GPIO1_CONTROL + offset; + int ret, fn; + + ret = wm831x_reg_read(wm831x, reg); + if (ret < 0) + return ret; + + switch (ret & WM831X_GPN_FN_MASK) { + case 0: + case 1: + break; + default: + /* Not in GPIO mode */ + return -EBUSY; + } + + if (debounce >= 32 && debounce <= 64) + fn = 0; + else if (debounce >= 4000 && debounce <= 8000) + fn = 1; + else + return -EINVAL; + + return wm831x_set_bits(wm831x, reg, WM831X_GPN_FN_MASK, fn); +} + #ifdef CONFIG_DEBUG_FS static void wm831x_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) { @@ -208,6 +239,7 @@ static struct gpio_chip template_chip = { .direction_output = wm831x_gpio_direction_out, .set = wm831x_gpio_set, .to_irq = wm831x_gpio_to_irq, + .set_debounce = wm831x_gpio_set_debounce, .dbg_show = wm831x_gpio_dbg_show, .can_sleep = 1, }; diff --git a/drivers/hwmon/mc13783-adc.c b/drivers/hwmon/mc13783-adc.c index ce3c7bc8181..d5226c9e120 100644 --- a/drivers/hwmon/mc13783-adc.c +++ b/drivers/hwmon/mc13783-adc.c @@ -18,7 +18,7 @@ * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#include <linux/mfd/mc13783-private.h> +#include <linux/mfd/mc13783.h> #include <linux/platform_device.h> #include <linux/hwmon-sysfs.h> #include <linux/kernel.h> @@ -144,6 +144,14 @@ static const struct attribute_group mc13783_group_ts = { .attrs = mc13783_attr_ts, }; +static int mc13783_adc_use_touchscreen(struct platform_device *pdev) +{ + struct mc13783_adc_priv *priv = platform_get_drvdata(pdev); + unsigned flags = mc13783_get_flags(priv->mc13783); + + return flags & MC13783_USE_TOUCHSCREEN; +} + static int __init mc13783_adc_probe(struct platform_device *pdev) { struct mc13783_adc_priv *priv; @@ -162,10 +170,11 @@ static int __init mc13783_adc_probe(struct platform_device *pdev) if (ret) goto out_err_create1; - if (!(priv->mc13783->flags & MC13783_USE_TOUCHSCREEN)) + if (!mc13783_adc_use_touchscreen(pdev)) { ret = sysfs_create_group(&pdev->dev.kobj, &mc13783_group_ts); if (ret) goto out_err_create2; + } priv->hwmon_dev = hwmon_device_register(&pdev->dev); if (IS_ERR(priv->hwmon_dev)) { @@ -180,7 +189,7 @@ static int __init mc13783_adc_probe(struct platform_device *pdev) out_err_register: - if (!(priv->mc13783->flags & MC13783_USE_TOUCHSCREEN)) + if (!mc13783_adc_use_touchscreen(pdev)) sysfs_remove_group(&pdev->dev.kobj, &mc13783_group_ts); out_err_create2: @@ -199,7 +208,7 @@ static int __devexit mc13783_adc_remove(struct platform_device *pdev) hwmon_device_unregister(priv->hwmon_dev); - if (!(priv->mc13783->flags & MC13783_USE_TOUCHSCREEN)) + if (!mc13783_adc_use_touchscreen(pdev)) sysfs_remove_group(&pdev->dev.kobj, &mc13783_group_ts); sysfs_remove_group(&pdev->dev.kobj, &mc13783_group); diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index b171f63fe4d..9cc488d2149 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -395,6 +395,16 @@ config KEYBOARD_SH_KEYSC To compile this driver as a module, choose M here: the module will be called sh_keysc. +config KEYBOARD_STMPE + tristate "STMPE keypad support" + depends on MFD_STMPE + help + Say Y here if you want to use the keypad controller on STMPE I/O + expanders. + + To compile this driver as a module, choose M here: the module will be + called stmpe-keypad. + config KEYBOARD_DAVINCI tristate "TI DaVinci Key Scan" depends on ARCH_DAVINCI_DM365 diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 1a66d5f1ca8..504b591be0c 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -35,6 +35,7 @@ obj-$(CONFIG_KEYBOARD_PXA930_ROTARY) += pxa930_rotary.o obj-$(CONFIG_KEYBOARD_QT2160) += qt2160.o obj-$(CONFIG_KEYBOARD_SAMSUNG) += samsung-keypad.o obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o +obj-$(CONFIG_KEYBOARD_STMPE) += stmpe-keypad.o obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o diff --git a/drivers/input/keyboard/stmpe-keypad.c b/drivers/input/keyboard/stmpe-keypad.c new file mode 100644 index 00000000000..ab7610ca10e --- /dev/null +++ b/drivers/input/keyboard/stmpe-keypad.c @@ -0,0 +1,386 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License, version 2 + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/input/matrix_keypad.h> +#include <linux/mfd/stmpe.h> + +/* These are at the same addresses in all STMPE variants */ +#define STMPE_KPC_COL 0x60 +#define STMPE_KPC_ROW_MSB 0x61 +#define STMPE_KPC_ROW_LSB 0x62 +#define STMPE_KPC_CTRL_MSB 0x63 +#define STMPE_KPC_CTRL_LSB 0x64 +#define STMPE_KPC_COMBI_KEY_0 0x65 +#define STMPE_KPC_COMBI_KEY_1 0x66 +#define STMPE_KPC_COMBI_KEY_2 0x67 +#define STMPE_KPC_DATA_BYTE0 0x68 +#define STMPE_KPC_DATA_BYTE1 0x69 +#define STMPE_KPC_DATA_BYTE2 0x6a +#define STMPE_KPC_DATA_BYTE3 0x6b +#define STMPE_KPC_DATA_BYTE4 0x6c + +#define STMPE_KPC_CTRL_LSB_SCAN (0x1 << 0) +#define STMPE_KPC_CTRL_LSB_DEBOUNCE (0x7f << 1) +#define STMPE_KPC_CTRL_MSB_SCAN_COUNT (0xf << 4) + +#define STMPE_KPC_ROW_MSB_ROWS 0xff + +#define STMPE_KPC_DATA_UP (0x1 << 7) +#define STMPE_KPC_DATA_ROW (0xf << 3) +#define STMPE_KPC_DATA_COL (0x7 << 0) +#define STMPE_KPC_DATA_NOKEY_MASK 0x78 + +#define STMPE_KEYPAD_MAX_DEBOUNCE 127 +#define STMPE_KEYPAD_MAX_SCAN_COUNT 15 + +#define STMPE_KEYPAD_MAX_ROWS 8 +#define STMPE_KEYPAD_MAX_COLS 8 +#define STMPE_KEYPAD_ROW_SHIFT 3 +#define STMPE_KEYPAD_KEYMAP_SIZE \ + (STMPE_KEYPAD_MAX_ROWS * STMPE_KEYPAD_MAX_COLS) + +/** + * struct stmpe_keypad_variant - model-specific attributes + * @auto_increment: whether the KPC_DATA_BYTE register address + * auto-increments on multiple read + * @num_data: number of data bytes + * @num_normal_data: number of normal keys' data bytes + * @max_cols: maximum number of columns supported + * @max_rows: maximum number of rows supported + * @col_gpios: bitmask of gpios which can be used for columns + * @row_gpios: bitmask of gpios which can be used for rows + */ +struct stmpe_keypad_variant { + bool auto_increment; + int num_data; + int num_normal_data; + int max_cols; + int max_rows; + unsigned int col_gpios; + unsigned int row_gpios; +}; + +static const struct stmpe_keypad_variant stmpe_keypad_variants[] = { + [STMPE1601] = { + .auto_increment = true, + .num_data = 5, + .num_normal_data = 3, + .max_cols = 8, + .max_rows = 8, + .col_gpios = 0x000ff, /* GPIO 0 - 7 */ + .row_gpios = 0x0ff00, /* GPIO 8 - 15 */ + }, + [STMPE2401] = { + .auto_increment = false, + .num_data = 3, + .num_normal_data = 2, + .max_cols = 8, + .max_rows = 12, + .col_gpios = 0x0000ff, /* GPIO 0 - 7*/ + .row_gpios = 0x1fef00, /* GPIO 8-14, 16-20 */ + }, + [STMPE2403] = { + .auto_increment = true, + .num_data = 5, + .num_normal_data = 3, + .max_cols = 8, + .max_rows = 12, + .col_gpios = 0x0000ff, /* GPIO 0 - 7*/ + .row_gpios = 0x1fef00, /* GPIO 8-14, 16-20 */ + }, +}; + +struct stmpe_keypad { + struct stmpe *stmpe; + struct input_dev *input; + const struct stmpe_keypad_variant *variant; + const struct stmpe_keypad_platform_data *plat; + + unsigned int rows; + unsigned int cols; + + unsigned short keymap[STMPE_KEYPAD_KEYMAP_SIZE]; +}; + +static int stmpe_keypad_read_data(struct stmpe_keypad *keypad, u8 *data) +{ + const struct stmpe_keypad_variant *variant = keypad->variant; + struct stmpe *stmpe = keypad->stmpe; + int ret; + int i; + + if (variant->auto_increment) + return stmpe_block_read(stmpe, STMPE_KPC_DATA_BYTE0, + variant->num_data, data); + + for (i = 0; i < variant->num_data; i++) { + ret = stmpe_reg_read(stmpe, STMPE_KPC_DATA_BYTE0 + i); + if (ret < 0) + return ret; + + data[i] = ret; + } + + return 0; +} + +static irqreturn_t stmpe_keypad_irq(int irq, void *dev) +{ + struct stmpe_keypad *keypad = dev; + struct input_dev *input = keypad->input; + const struct stmpe_keypad_variant *variant = keypad->variant; + u8 fifo[variant->num_data]; + int ret; + int i; + + ret = stmpe_keypad_read_data(keypad, fifo); + if (ret < 0) + return IRQ_NONE; + + for (i = 0; i < variant->num_normal_data; i++) { + u8 data = fifo[i]; + int row = (data & STMPE_KPC_DATA_ROW) >> 3; + int col = data & STMPE_KPC_DATA_COL; + int code = MATRIX_SCAN_CODE(row, col, STMPE_KEYPAD_ROW_SHIFT); + bool up = data & STMPE_KPC_DATA_UP; + + if ((data & STMPE_KPC_DATA_NOKEY_MASK) + == STMPE_KPC_DATA_NOKEY_MASK) + continue; + + input_event(input, EV_MSC, MSC_SCAN, code); + input_report_key(input, keypad->keymap[code], !up); + input_sync(input); + } + + return IRQ_HANDLED; +} + +static int __devinit stmpe_keypad_altfunc_init(struct stmpe_keypad *keypad) +{ + const struct stmpe_keypad_variant *variant = keypad->variant; + unsigned int col_gpios = variant->col_gpios; + unsigned int row_gpios = variant->row_gpios; + struct stmpe *stmpe = keypad->stmpe; + unsigned int pins = 0; + int i; + + /* + * Figure out which pins need to be set to the keypad alternate + * function. + * + * {cols,rows}_gpios are bitmasks of which pins on the chip can be used + * for the keypad. + * + * keypad->{cols,rows} are a bitmask of which pins (of the ones useable + * for the keypad) are used on the board. + */ + + for (i = 0; i < variant->max_cols; i++) { + int num = __ffs(col_gpios); + + if (keypad->cols & (1 << i)) + pins |= 1 << num; + + col_gpios &= ~(1 << num); + } + + for (i = 0; i < variant->max_rows; i++) { + int num = __ffs(row_gpios); + + if (keypad->rows & (1 << i)) + pins |= 1 << num; + + row_gpios &= ~(1 << num); + } + + return stmpe_set_altfunc(stmpe, pins, STMPE_BLOCK_KEYPAD); +} + +static int __devinit stmpe_keypad_chip_init(struct stmpe_keypad *keypad) +{ + const struct stmpe_keypad_platform_data *plat = keypad->plat; + const struct stmpe_keypad_variant *variant = keypad->variant; + struct stmpe *stmpe = keypad->stmpe; + int ret; + + if (plat->debounce_ms > STMPE_KEYPAD_MAX_DEBOUNCE) + return -EINVAL; + + if (plat->scan_count > STMPE_KEYPAD_MAX_SCAN_COUNT) + return -EINVAL; + + ret = stmpe_enable(stmpe, STMPE_BLOCK_KEYPAD); + if (ret < 0) + return ret; + + ret = stmpe_keypad_altfunc_init(keypad); + if (ret < 0) + return ret; + + ret = stmpe_reg_write(stmpe, STMPE_KPC_COL, keypad->cols); + if (ret < 0) + return ret; + + ret = stmpe_reg_write(stmpe, STMPE_KPC_ROW_LSB, keypad->rows); + if (ret < 0) + return ret; + + if (variant->max_rows > 8) { + ret = stmpe_set_bits(stmpe, STMPE_KPC_ROW_MSB, + STMPE_KPC_ROW_MSB_ROWS, + keypad->rows >> 8); + if (ret < 0) + return ret; + } + + ret = stmpe_set_bits(stmpe, STMPE_KPC_CTRL_MSB, + STMPE_KPC_CTRL_MSB_SCAN_COUNT, + plat->scan_count << 4); + if (ret < 0) + return ret; + + return stmpe_set_bits(stmpe, STMPE_KPC_CTRL_LSB, + STMPE_KPC_CTRL_LSB_SCAN | + STMPE_KPC_CTRL_LSB_DEBOUNCE, + STMPE_KPC_CTRL_LSB_SCAN | + (plat->debounce_ms << 1)); +} + +static int __devinit stmpe_keypad_probe(struct platform_device *pdev) +{ + struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent); + struct stmpe_keypad_platform_data *plat; + struct stmpe_keypad *keypad; + struct input_dev *input; + int ret; + int irq; + int i; + + plat = stmpe->pdata->keypad; + if (!plat) + return -ENODEV; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + keypad = kzalloc(sizeof(struct stmpe_keypad), GFP_KERNEL); + if (!keypad) + return -ENOMEM; + + input = input_allocate_device(); + if (!input) { + ret = -ENOMEM; + goto out_freekeypad; + } + + input->name = "STMPE keypad"; + input->id.bustype = BUS_I2C; + input->dev.parent = &pdev->dev; + + input_set_capability(input, EV_MSC, MSC_SCAN); + + __set_bit(EV_KEY, input->evbit); + if (!plat->no_autorepeat) + __set_bit(EV_REP, input->evbit); + + input->keycode = keypad->keymap; + input->keycodesize = sizeof(keypad->keymap[0]); + input->keycodemax = ARRAY_SIZE(keypad->keymap); + + matrix_keypad_build_keymap(plat->keymap_data, STMPE_KEYPAD_ROW_SHIFT, + input->keycode, input->keybit); + + for (i = 0; i < plat->keymap_data->keymap_size; i++) { + unsigned int key = plat->keymap_data->keymap[i]; + + keypad->cols |= 1 << KEY_COL(key); + keypad->rows |= 1 << KEY_ROW(key); + } + + keypad->stmpe = stmpe; + keypad->plat = plat; + keypad->input = input; + keypad->variant = &stmpe_keypad_variants[stmpe->partnum]; + + ret = stmpe_keypad_chip_init(keypad); + if (ret < 0) + goto out_freeinput; + + ret = input_register_device(input); + if (ret) { + dev_err(&pdev->dev, + "unable to register input device: %d\n", ret); + goto out_freeinput; + } + + ret = request_threaded_irq(irq, NULL, stmpe_keypad_irq, IRQF_ONESHOT, + "stmpe-keypad", keypad); + if (ret) { + dev_err(&pdev->dev, "unable to get irq: %d\n", ret); + goto out_unregisterinput; + } + + platform_set_drvdata(pdev, keypad); + + return 0; + +out_unregisterinput: + input_unregister_device(input); + input = NULL; +out_freeinput: + input_free_device(input); +out_freekeypad: + kfree(keypad); + return ret; +} + +static int __devexit stmpe_keypad_remove(struct platform_device *pdev) +{ + struct stmpe_keypad *keypad = platform_get_drvdata(pdev); + struct stmpe *stmpe = keypad->stmpe; + int irq = platform_get_irq(pdev, 0); + + stmpe_disable(stmpe, STMPE_BLOCK_KEYPAD); + + free_irq(irq, keypad); + input_unregister_device(keypad->input); + platform_set_drvdata(pdev, NULL); + kfree(keypad); + + return 0; +} + +static struct platform_driver stmpe_keypad_driver = { + .driver.name = "stmpe-keypad", + .driver.owner = THIS_MODULE, + .probe = stmpe_keypad_probe, + .remove = __devexit_p(stmpe_keypad_remove), +}; + +static int __init stmpe_keypad_init(void) +{ + return platform_driver_register(&stmpe_keypad_driver); +} +module_init(stmpe_keypad_init); + +static void __exit stmpe_keypad_exit(void) +{ + platform_driver_unregister(&stmpe_keypad_driver); +} +module_exit(stmpe_keypad_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("STMPExxxx keypad driver"); +MODULE_AUTHOR("Rabin Vincent <rabin.vincent@stericsson.com>"); diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 61f35184f76..0069d9703fd 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -628,4 +628,14 @@ config TOUCHSCREEN_TPS6507X To compile this driver as a module, choose M here: the module will be called tps6507x_ts. +config TOUCHSCREEN_STMPE + tristate "STMicroelectronics STMPE touchscreens" + depends on MFD_STMPE + help + Say Y here if you want support for STMicroelectronics + STMPE touchscreen controllers. + + To compile this driver as a module, choose M here: the + module will be called stmpe-ts. + endif diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index bd6f30b4ff7..28217e1dcaf 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -36,6 +36,7 @@ obj-$(CONFIG_TOUCHSCREEN_PCAP) += pcap_ts.o obj-$(CONFIG_TOUCHSCREEN_PENMOUNT) += penmount.o obj-$(CONFIG_TOUCHSCREEN_QT602240) += qt602240_ts.o obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o +obj-$(CONFIG_TOUCHSCREEN_STMPE) += stmpe-ts.o obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o diff --git a/drivers/input/touchscreen/stmpe-ts.c b/drivers/input/touchscreen/stmpe-ts.c new file mode 100644 index 00000000000..656148ec002 --- /dev/null +++ b/drivers/input/touchscreen/stmpe-ts.c @@ -0,0 +1,397 @@ +/* STMicroelectronics STMPE811 Touchscreen Driver + * + * (C) 2010 Luotao Fu <l.fu@pengutronix.de> + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/workqueue.h> + +#include <linux/mfd/stmpe.h> + +/* Register layouts and functionalities are identical on all stmpexxx variants + * with touchscreen controller + */ +#define STMPE_REG_INT_STA 0x0B +#define STMPE_REG_ADC_CTRL1 0x20 +#define STMPE_REG_ADC_CTRL2 0x21 +#define STMPE_REG_TSC_CTRL 0x40 +#define STMPE_REG_TSC_CFG 0x41 +#define STMPE_REG_FIFO_TH 0x4A +#define STMPE_REG_FIFO_STA 0x4B +#define STMPE_REG_FIFO_SIZE 0x4C +#define STMPE_REG_TSC_DATA_XYZ 0x52 +#define STMPE_REG_TSC_FRACTION_Z 0x56 +#define STMPE_REG_TSC_I_DRIVE 0x58 + +#define OP_MOD_XYZ 0 + +#define STMPE_TSC_CTRL_TSC_EN (1<<0) + +#define STMPE_FIFO_STA_RESET (1<<0) + +#define STMPE_IRQ_TOUCH_DET 0 + +#define SAMPLE_TIME(x) ((x & 0xf) << 4) +#define MOD_12B(x) ((x & 0x1) << 3) +#define REF_SEL(x) ((x & 0x1) << 1) +#define ADC_FREQ(x) (x & 0x3) +#define AVE_CTRL(x) ((x & 0x3) << 6) +#define DET_DELAY(x) ((x & 0x7) << 3) +#define SETTLING(x) (x & 0x7) +#define FRACTION_Z(x) (x & 0x7) +#define I_DRIVE(x) (x & 0x1) +#define OP_MODE(x) ((x & 0x7) << 1) + +#define STMPE_TS_NAME "stmpe-ts" +#define XY_MASK 0xfff + +struct stmpe_touch { + struct stmpe *stmpe; + struct input_dev *idev; + struct delayed_work work; + struct device *dev; + u8 sample_time; + u8 mod_12b; + u8 ref_sel; + u8 adc_freq; + u8 ave_ctrl; + u8 touch_det_delay; + u8 settling; + u8 fraction_z; + u8 i_drive; +}; + +static int __stmpe_reset_fifo(struct stmpe *stmpe) +{ + int ret; + + ret = stmpe_set_bits(stmpe, STMPE_REG_FIFO_STA, + STMPE_FIFO_STA_RESET, STMPE_FIFO_STA_RESET); + if (ret) + return ret; + + return stmpe_set_bits(stmpe, STMPE_REG_FIFO_STA, + STMPE_FIFO_STA_RESET, 0); +} + +static void stmpe_work(struct work_struct *work) +{ + int int_sta; + u32 timeout = 40; + + struct stmpe_touch *ts = + container_of(work, struct stmpe_touch, work.work); + + int_sta = stmpe_reg_read(ts->stmpe, STMPE_REG_INT_STA); + + /* + * touch_det sometimes get desasserted or just get stuck. This appears + * to be a silicon bug, We still have to clearify this with the + * manufacture. As a workaround We release the key anyway if the + * touch_det keeps coming in after 4ms, while the FIFO contains no value + * during the whole time. + */ + while ((int_sta & (1 << STMPE_IRQ_TOUCH_DET)) && (timeout > 0)) { + timeout--; + int_sta = stmpe_reg_read(ts->stmpe, STMPE_REG_INT_STA); + udelay(100); + } + + /* reset the FIFO before we report release event */ + __stmpe_reset_fifo(ts->stmpe); + + input_report_abs(ts->idev, ABS_PRESSURE, 0); + input_sync(ts->idev); +} + +static irqreturn_t stmpe_ts_handler(int irq, void *data) +{ + u8 data_set[4]; + int x, y, z; + struct stmpe_touch *ts = data; + + /* + * Cancel scheduled polling for release if we have new value + * available. Wait if the polling is already running. + */ + cancel_delayed_work_sync(&ts->work); + + /* + * The FIFO sometimes just crashes and stops generating interrupts. This + * appears to be a silicon bug. We still have to clearify this with + * the manufacture. As a workaround we disable the TSC while we are + * collecting data and flush the FIFO after reading + */ + stmpe_set_bits(ts->stmpe, STMPE_REG_TSC_CTRL, + STMPE_TSC_CTRL_TSC_EN, 0); + + stmpe_block_read(ts->stmpe, STMPE_REG_TSC_DATA_XYZ, 4, data_set); + + x = (data_set[0] << 4) | (data_set[1] >> 4); + y = ((data_set[1] & 0xf) << 8) | data_set[2]; + z = data_set[3]; + + input_report_abs(ts->idev, ABS_X, x); + input_report_abs(ts->idev, ABS_Y, y); + input_report_abs(ts->idev, ABS_PRESSURE, z); + input_sync(ts->idev); + + /* flush the FIFO after we have read out our values. */ + __stmpe_reset_fifo(ts->stmpe); + + /* reenable the tsc */ + stmpe_set_bits(ts->stmpe, STMPE_REG_TSC_CTRL, + STMPE_TSC_CTRL_TSC_EN, STMPE_TSC_CTRL_TSC_EN); + + /* start polling for touch_det to detect release */ + schedule_delayed_work(&ts->work, HZ / 50); + + return IRQ_HANDLED; +} + +static int __devinit stmpe_init_hw(struct stmpe_touch *ts) +{ + int ret; + u8 adc_ctrl1, adc_ctrl1_mask, tsc_cfg, tsc_cfg_mask; + struct stmpe *stmpe = ts->stmpe; + struct device *dev = ts->dev; + + ret = stmpe_enable(stmpe, STMPE_BLOCK_TOUCHSCREEN | STMPE_BLOCK_ADC); + if (ret) { + dev_err(dev, "Could not enable clock for ADC and TS\n"); + return ret; + } + + adc_ctrl1 = SAMPLE_TIME(ts->sample_time) | MOD_12B(ts->mod_12b) | + REF_SEL(ts->ref_sel); + adc_ctrl1_mask = SAMPLE_TIME(0xff) | MOD_12B(0xff) | REF_SEL(0xff); + + ret = stmpe_set_bits(stmpe, STMPE_REG_ADC_CTRL1, + adc_ctrl1_mask, adc_ctrl1); + if (ret) { + dev_err(dev, "Could not setup ADC\n"); + return ret; + } + + ret = stmpe_set_bits(stmpe, STMPE_REG_ADC_CTRL2, + ADC_FREQ(0xff), ADC_FREQ(ts->adc_freq)); + if (ret) { + dev_err(dev, "Could not setup ADC\n"); + return ret; + } + + tsc_cfg = AVE_CTRL(ts->ave_ctrl) | DET_DELAY(ts->touch_det_delay) | + SETTLING(ts->settling); + tsc_cfg_mask = AVE_CTRL(0xff) | DET_DELAY(0xff) | SETTLING(0xff); + + ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_CFG, tsc_cfg_mask, tsc_cfg); + if (ret) { + dev_err(dev, "Could not config touch\n"); + return ret; + } + + ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_FRACTION_Z, + FRACTION_Z(0xff), FRACTION_Z(ts->fraction_z)); + if (ret) { + dev_err(dev, "Could not config touch\n"); + return ret; + } + + ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_I_DRIVE, + I_DRIVE(0xff), I_DRIVE(ts->i_drive)); + if (ret) { + dev_err(dev, "Could not config touch\n"); + return ret; + } + + /* set FIFO to 1 for single point reading */ + ret = stmpe_reg_write(stmpe, STMPE_REG_FIFO_TH, 1); + if (ret) { + dev_err(dev, "Could not set FIFO\n"); + return ret; + } + + ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_CTRL, + OP_MODE(0xff), OP_MODE(OP_MOD_XYZ)); + if (ret) { + dev_err(dev, "Could not set mode\n"); + return ret; + } + + return 0; +} + +static int stmpe_ts_open(struct input_dev *dev) +{ + struct stmpe_touch *ts = input_get_drvdata(dev); + int ret = 0; + + ret = __stmpe_reset_fifo(ts->stmpe); + if (ret) + return ret; + + return stmpe_set_bits(ts->stmpe, STMPE_REG_TSC_CTRL, + STMPE_TSC_CTRL_TSC_EN, STMPE_TSC_CTRL_TSC_EN); +} + +static void stmpe_ts_close(struct input_dev *dev) +{ + struct stmpe_touch *ts = input_get_drvdata(dev); + + cancel_delayed_work_sync(&ts->work); + + stmpe_set_bits(ts->stmpe, STMPE_REG_TSC_CTRL, + STMPE_TSC_CTRL_TSC_EN, 0); +} + +static int __devinit stmpe_input_probe(struct platform_device *pdev) +{ + struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent); + struct stmpe_platform_data *pdata = stmpe->pdata; + struct stmpe_touch *ts; + struct input_dev *idev; + struct stmpe_ts_platform_data *ts_pdata = NULL; + int ret = 0; + int ts_irq; + + ts_irq = platform_get_irq_byname(pdev, "FIFO_TH"); + if (ts_irq < 0) + return ts_irq; + + ts = kzalloc(sizeof(*ts), GFP_KERNEL); + if (!ts) + goto err_out; + + idev = input_allocate_device(); + if (!idev) + goto err_free_ts; + + platform_set_drvdata(pdev, ts); + ts->stmpe = stmpe; + ts->idev = idev; + ts->dev = &pdev->dev; + + if (pdata) + ts_pdata = pdata->ts; + + if (ts_pdata) { + ts->sample_time = ts_pdata->sample_time; + ts->mod_12b = ts_pdata->mod_12b; + ts->ref_sel = ts_pdata->ref_sel; + ts->adc_freq = ts_pdata->adc_freq; + ts->ave_ctrl = ts_pdata->ave_ctrl; + ts->touch_det_delay = ts_pdata->touch_det_delay; + ts->settling = ts_pdata->settling; + ts->fraction_z = ts_pdata->fraction_z; + ts->i_drive = ts_pdata->i_drive; + } + + INIT_DELAYED_WORK(&ts->work, stmpe_work); + + ret = request_threaded_irq(ts_irq, NULL, stmpe_ts_handler, + IRQF_ONESHOT, STMPE_TS_NAME, ts); + if (ret) { + dev_err(&pdev->dev, "Failed to request IRQ %d\n", ts_irq); + goto err_free_input; + } + + ret = stmpe_init_hw(ts); + if (ret) + goto err_free_irq; + + idev->name = STMPE_TS_NAME; + idev->id.bustype = BUS_I2C; + idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + idev->open = stmpe_ts_open; + idev->close = stmpe_ts_close; + + input_set_drvdata(idev, ts); + + input_set_abs_params(idev, ABS_X, 0, XY_MASK, 0, 0); + input_set_abs_params(idev, ABS_Y, 0, XY_MASK, 0, 0); + input_set_abs_params(idev, ABS_PRESSURE, 0x0, 0xff, 0, 0); + + ret = input_register_device(idev); + if (ret) { + dev_err(&pdev->dev, "Could not register input device\n"); + goto err_free_irq; + } + + return ret; + +err_free_irq: + free_irq(ts_irq, ts); +err_free_input: + input_free_device(idev); + platform_set_drvdata(pdev, NULL); +err_free_ts: + kfree(ts); +err_out: + return ret; +} + +static int __devexit stmpe_ts_remove(struct platform_device *pdev) +{ + struct stmpe_touch *ts = platform_get_drvdata(pdev); + unsigned int ts_irq = platform_get_irq_byname(pdev, "FIFO_TH"); + + stmpe_disable(ts->stmpe, STMPE_BLOCK_TOUCHSCREEN); + + free_irq(ts_irq, ts); + + platform_set_drvdata(pdev, NULL); + + input_unregister_device(ts->idev); + input_free_device(ts->idev); + + kfree(ts); + + return 0; +} + +static struct platform_driver stmpe_ts_driver = { + .driver = { + .name = STMPE_TS_NAME, + .owner = THIS_MODULE, + }, + .probe = stmpe_input_probe, + .remove = __devexit_p(stmpe_ts_remove), +}; + +static int __init stmpe_ts_init(void) +{ + return platform_driver_register(&stmpe_ts_driver); +} + +module_init(stmpe_ts_init); + +static void __exit stmpe_ts_exit(void) +{ + platform_driver_unregister(&stmpe_ts_driver); +} + +module_exit(stmpe_ts_exit); + +MODULE_AUTHOR("Luotao Fu <l.fu@pengutronix.de>"); +MODULE_DESCRIPTION("STMPEXXX touchscreen driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" STMPE_TS_NAME); diff --git a/drivers/mfd/88pm860x-core.c b/drivers/mfd/88pm860x-core.c index 2c65a2c5729..07933f3f7e4 100644 --- a/drivers/mfd/88pm860x-core.c +++ b/drivers/mfd/88pm860x-core.c @@ -74,12 +74,12 @@ static struct mfd_cell backlight_devs[] = { } static struct resource led_resources[] = { - PM8606_LED_RESOURCE(PM8606_LED1_RED, RGB2B), - PM8606_LED_RESOURCE(PM8606_LED1_GREEN, RGB2C), - PM8606_LED_RESOURCE(PM8606_LED1_BLUE, RGB2D), - PM8606_LED_RESOURCE(PM8606_LED2_RED, RGB1B), - PM8606_LED_RESOURCE(PM8606_LED2_GREEN, RGB1C), - PM8606_LED_RESOURCE(PM8606_LED2_BLUE, RGB1D), + PM8606_LED_RESOURCE(PM8606_LED1_RED, RGB1B), + PM8606_LED_RESOURCE(PM8606_LED1_GREEN, RGB1C), + PM8606_LED_RESOURCE(PM8606_LED1_BLUE, RGB1D), + PM8606_LED_RESOURCE(PM8606_LED2_RED, RGB2B), + PM8606_LED_RESOURCE(PM8606_LED2_GREEN, RGB2C), + PM8606_LED_RESOURCE(PM8606_LED2_BLUE, RGB2D), }; #define PM8606_LED_DEVS(_i) \ @@ -428,52 +428,44 @@ static int __devinit device_gpadc_init(struct pm860x_chip *chip, { struct i2c_client *i2c = (chip->id == CHIP_PM8607) ? chip->client \ : chip->companion; - int use_gpadc = 0, data, ret; + int data; + int ret; /* initialize GPADC without activating it */ - if (pdata && pdata->touch) { - /* set GPADC MISC1 register */ - data = 0; - data |= (pdata->touch->gpadc_prebias << 1) - & PM8607_GPADC_PREBIAS_MASK; - data |= (pdata->touch->slot_cycle << 3) - & PM8607_GPADC_SLOT_CYCLE_MASK; - data |= (pdata->touch->off_scale << 5) - & PM8607_GPADC_OFF_SCALE_MASK; - data |= (pdata->touch->sw_cal << 7) - & PM8607_GPADC_SW_CAL_MASK; - if (data) { - ret = pm860x_reg_write(i2c, PM8607_GPADC_MISC1, data); - if (ret < 0) - goto out; - } - /* set tsi prebias time */ - if (pdata->touch->tsi_prebias) { - data = pdata->touch->tsi_prebias; - ret = pm860x_reg_write(i2c, PM8607_TSI_PREBIAS, data); - if (ret < 0) - goto out; - } - /* set prebias & prechg time of pen detect */ - data = 0; - data |= pdata->touch->pen_prebias & PM8607_PD_PREBIAS_MASK; - data |= (pdata->touch->pen_prechg << 5) - & PM8607_PD_PRECHG_MASK; - if (data) { - ret = pm860x_reg_write(i2c, PM8607_PD_PREBIAS, data); - if (ret < 0) - goto out; - } + if (!pdata || !pdata->touch) + return -EINVAL; - use_gpadc = 1; + /* set GPADC MISC1 register */ + data = 0; + data |= (pdata->touch->gpadc_prebias << 1) & PM8607_GPADC_PREBIAS_MASK; + data |= (pdata->touch->slot_cycle << 3) & PM8607_GPADC_SLOT_CYCLE_MASK; + data |= (pdata->touch->off_scale << 5) & PM8607_GPADC_OFF_SCALE_MASK; + data |= (pdata->touch->sw_cal << 7) & PM8607_GPADC_SW_CAL_MASK; + if (data) { + ret = pm860x_reg_write(i2c, PM8607_GPADC_MISC1, data); + if (ret < 0) + goto out; } - - /* turn on GPADC */ - if (use_gpadc) { - ret = pm860x_set_bits(i2c, PM8607_GPADC_MISC1, - PM8607_GPADC_EN, PM8607_GPADC_EN); + /* set tsi prebias time */ + if (pdata->touch->tsi_prebias) { + data = pdata->touch->tsi_prebias; + ret = pm860x_reg_write(i2c, PM8607_TSI_PREBIAS, data); + if (ret < 0) + goto out; } + /* set prebias & prechg time of pen detect */ + data = 0; + data |= pdata->touch->pen_prebias & PM8607_PD_PREBIAS_MASK; + data |= (pdata->touch->pen_prechg << 5) & PM8607_PD_PRECHG_MASK; + if (data) { + ret = pm860x_reg_write(i2c, PM8607_PD_PREBIAS, data); + if (ret < 0) + goto out; + } + + ret = pm860x_set_bits(i2c, PM8607_GPADC_MISC1, + PM8607_GPADC_EN, PM8607_GPADC_EN); out: return ret; } diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 9da0e504bbe..d75909e7cf2 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -7,7 +7,16 @@ menuconfig MFD_SUPPORT depends on HAS_IOMEM default y help - Configure MFD device drivers. + Multifunction devices embed several functions (e.g. GPIOs, + touchscreens, keyboards, current regulators, power management chips, + etc...) in one single integrated circuit. They usually talk to the + main CPU through one or more IRQ lines and low speed data busses (SPI, + I2C, etc..). They appear as one single device to the main system + through the data bus and the MFD framework allows for sub devices + (a.k.a. functions) to appear as discrete platform devices. + MFDs are typically found on embedded platforms. + + This option alone does not add any kernel code. if MFD_SUPPORT @@ -177,6 +186,38 @@ config TWL4030_CODEC select MFD_CORE default n +config TWL6030_PWM + tristate "TWL6030 PWM (Pulse Width Modulator) Support" + depends on TWL4030_CORE + select HAVE_PWM + default n + help + Say yes here if you want support for TWL6030 PWM. + This is used to control charging LED brightness. + +config MFD_STMPE + bool "Support STMicroelectronics STMPE" + depends on I2C=y && GENERIC_HARDIRQS + select MFD_CORE + help + Support for the STMPE family of I/O Expanders from + STMicroelectronics. + + Currently supported devices are: + + STMPE811: GPIO, Touchscreen + STMPE1601: GPIO, Keypad + STMPE2401: GPIO, Keypad + STMPE2403: GPIO, Keypad + + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the functionality + of the device. Currently available sub drivers are: + + GPIO: stmpe-gpio + Keypad: stmpe-keypad + Touchscreen: stmpe-ts + config MFD_TC35892 bool "Support Toshiba TC35892" depends on I2C=y && GENERIC_HARDIRQS @@ -482,6 +523,28 @@ config MFD_JANZ_CMODIO host many different types of MODULbus daughterboards, including CAN and GPIO controllers. +config MFD_JZ4740_ADC + tristate "Support for the JZ4740 SoC ADC core" + select MFD_CORE + depends on MACH_JZ4740 + help + Say yes here if you want support for the ADC unit in the JZ4740 SoC. + This driver is necessary for jz4740-battery and jz4740-hwmon driver. + +config MFD_TPS6586X + tristate "TPS6586x Power Management chips" + depends on I2C && GPIOLIB + select MFD_CORE + help + If you say yes here you get support for the TPS6586X series of + Power Management chips. + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the + functionality of the device. + + This driver can also be built as a module. If so, the module + will be called tps6586x. + endif # MFD_SUPPORT menu "Multimedia Capabilities Port drivers" diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index fb503e77dc6..1e48d7e3e88 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_HTC_I2CPLD) += htc-i2cpld.o obj-$(CONFIG_MFD_DAVINCI_VOICECODEC) += davinci_voicecodec.o obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o +obj-$(CONFIG_MFD_STMPE) += stmpe.o obj-$(CONFIG_MFD_TC35892) += tc35892.o obj-$(CONFIG_MFD_T7L66XB) += t7l66xb.o tmio_core.o obj-$(CONFIG_MFD_TC6387XB) += tc6387xb.o tmio_core.o @@ -36,6 +37,7 @@ obj-$(CONFIG_MENELAUS) += menelaus.o obj-$(CONFIG_TWL4030_CORE) += twl-core.o twl4030-irq.o twl6030-irq.o obj-$(CONFIG_TWL4030_POWER) += twl4030-power.o obj-$(CONFIG_TWL4030_CODEC) += twl4030-codec.o +obj-$(CONFIG_TWL6030_PWM) += twl6030-pwm.o obj-$(CONFIG_MFD_MC13783) += mc13783-core.o @@ -71,3 +73,5 @@ obj-$(CONFIG_PMIC_ADP5520) += adp5520.o obj-$(CONFIG_LPC_SCH) += lpc_sch.o obj-$(CONFIG_MFD_RDC321X) += rdc321x-southbridge.o obj-$(CONFIG_MFD_JANZ_CMODIO) += janz-cmodio.o +obj-$(CONFIG_MFD_JZ4740_ADC) += jz4740-adc.o +obj-$(CONFIG_MFD_TPS6586X) += tps6586x.o diff --git a/drivers/mfd/ab3100-otp.c b/drivers/mfd/ab3100-otp.c index 63d2b727ddb..8440010eb2b 100644 --- a/drivers/mfd/ab3100-otp.c +++ b/drivers/mfd/ab3100-otp.c @@ -199,7 +199,7 @@ static int __init ab3100_otp_probe(struct platform_device *pdev) err = ab3100_otp_read(otp); if (err) - return err; + goto err_otp_read; dev_info(&pdev->dev, "AB3100 OTP readout registered\n"); @@ -208,21 +208,21 @@ static int __init ab3100_otp_probe(struct platform_device *pdev) err = device_create_file(&pdev->dev, &ab3100_otp_attrs[i]); if (err) - goto out_no_sysfs; + goto err_create_file; } /* debugfs entries */ err = ab3100_otp_init_debugfs(&pdev->dev, otp); if (err) - goto out_no_debugfs; + goto err_init_debugfs; return 0; -out_no_sysfs: - for (i = 0; i < ARRAY_SIZE(ab3100_otp_attrs); i++) - device_remove_file(&pdev->dev, - &ab3100_otp_attrs[i]); -out_no_debugfs: +err_init_debugfs: +err_create_file: + while (--i >= 0) + device_remove_file(&pdev->dev, &ab3100_otp_attrs[i]); +err_otp_read: kfree(otp); return err; } diff --git a/drivers/mfd/ab3550-core.c b/drivers/mfd/ab3550-core.c index f54ab62e7bc..8a98739e6d9 100644 --- a/drivers/mfd/ab3550-core.c +++ b/drivers/mfd/ab3550-core.c @@ -589,16 +589,16 @@ static bool reg_read_allowed(const struct ab3550_reg_ranges *ranges, u8 reg) } /* - * The exported register access functionality. + * The register access functionality. */ -int ab3550_get_chip_id(struct device *dev) +static int ab3550_get_chip_id(struct device *dev) { struct ab3550 *ab = dev_get_drvdata(dev->parent); return (int)ab->chip_id; } -int ab3550_mask_and_set_register_interruptible(struct device *dev, u8 bank, - u8 reg, u8 bitmask, u8 bitvalues) +static int ab3550_mask_and_set_register_interruptible(struct device *dev, + u8 bank, u8 reg, u8 bitmask, u8 bitvalues) { struct ab3550 *ab; struct platform_device *pdev = to_platform_device(dev); @@ -612,15 +612,15 @@ int ab3550_mask_and_set_register_interruptible(struct device *dev, u8 bank, bitmask, bitvalues); } -int ab3550_set_register_interruptible(struct device *dev, u8 bank, u8 reg, - u8 value) +static int ab3550_set_register_interruptible(struct device *dev, u8 bank, + u8 reg, u8 value) { return ab3550_mask_and_set_register_interruptible(dev, bank, reg, 0xFF, value); } -int ab3550_get_register_interruptible(struct device *dev, u8 bank, u8 reg, - u8 *value) +static int ab3550_get_register_interruptible(struct device *dev, u8 bank, + u8 reg, u8 *value) { struct ab3550 *ab; struct platform_device *pdev = to_platform_device(dev); @@ -633,7 +633,7 @@ int ab3550_get_register_interruptible(struct device *dev, u8 bank, u8 reg, return get_register_interruptible(ab, bank, reg, value); } -int ab3550_get_register_page_interruptible(struct device *dev, u8 bank, +static int ab3550_get_register_page_interruptible(struct device *dev, u8 bank, u8 first_reg, u8 *regvals, u8 numregs) { struct ab3550 *ab; @@ -649,7 +649,8 @@ int ab3550_get_register_page_interruptible(struct device *dev, u8 bank, numregs); } -int ab3550_event_registers_startup_state_get(struct device *dev, u8 *event) +static int ab3550_event_registers_startup_state_get(struct device *dev, + u8 *event) { struct ab3550 *ab; @@ -661,7 +662,7 @@ int ab3550_event_registers_startup_state_get(struct device *dev, u8 *event) return 0; } -int ab3550_startup_irq_enabled(struct device *dev, unsigned int irq) +static int ab3550_startup_irq_enabled(struct device *dev, unsigned int irq) { struct ab3550 *ab; struct ab3550_platform_data *plf_data; diff --git a/drivers/mfd/ab8500-spi.c b/drivers/mfd/ab8500-spi.c index b81d4f768ef..e1c8b62b086 100644 --- a/drivers/mfd/ab8500-spi.c +++ b/drivers/mfd/ab8500-spi.c @@ -68,7 +68,12 @@ static int ab8500_spi_read(struct ab8500 *ab8500, u16 addr) ret = spi_sync(spi, &msg); if (!ret) - ret = ab8500->rx_buf[0]; + /* + * Only the 8 lowermost bytes are + * defined with value, the rest may + * vary depending on chip/board noise. + */ + ret = ab8500->rx_buf[0] & 0xFFU; return ret; } diff --git a/drivers/mfd/abx500-core.c b/drivers/mfd/abx500-core.c index 3b3b97ec32a..f12720dbe12 100644 --- a/drivers/mfd/abx500-core.c +++ b/drivers/mfd/abx500-core.c @@ -36,7 +36,7 @@ int abx500_register_ops(struct device *dev, struct abx500_ops *ops) struct abx500_device_entry *dev_entry; dev_entry = kzalloc(sizeof(struct abx500_device_entry), GFP_KERNEL); - if (IS_ERR(dev_entry)) { + if (!dev_entry) { dev_err(dev, "register_ops kzalloc failed"); return -ENOMEM; } diff --git a/drivers/mfd/davinci_voicecodec.c b/drivers/mfd/davinci_voicecodec.c index 3e75f02e477..33c923d215c 100644 --- a/drivers/mfd/davinci_voicecodec.c +++ b/drivers/mfd/davinci_voicecodec.c @@ -94,7 +94,8 @@ static int __init davinci_vc_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_DMA, 0); if (!res) { dev_err(&pdev->dev, "no DMA resource\n"); - return -ENXIO; + ret = -ENXIO; + goto fail4; } davinci_vc->davinci_vcif.dma_tx_channel = res->start; @@ -104,7 +105,8 @@ static int __init davinci_vc_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_DMA, 1); if (!res) { dev_err(&pdev->dev, "no DMA resource\n"); - return -ENXIO; + ret = -ENXIO; + goto fail4; } davinci_vc->davinci_vcif.dma_rx_channel = res->start; diff --git a/drivers/mfd/janz-cmodio.c b/drivers/mfd/janz-cmodio.c index 9ed630799ac..36a166bcdb0 100644 --- a/drivers/mfd/janz-cmodio.c +++ b/drivers/mfd/janz-cmodio.c @@ -18,6 +18,7 @@ #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/platform_device.h> +#include <linux/slab.h> #include <linux/mfd/core.h> #include <linux/mfd/janz.h> diff --git a/drivers/mfd/jz4740-adc.c b/drivers/mfd/jz4740-adc.c new file mode 100644 index 00000000000..3ad492cb6c4 --- /dev/null +++ b/drivers/mfd/jz4740-adc.c @@ -0,0 +1,394 @@ +/* + * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de> + * JZ4740 SoC ADC driver + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * This driver synchronizes access to the JZ4740 ADC core between the + * JZ4740 battery and hwmon drivers. + */ + +#include <linux/err.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/spinlock.h> + +#include <linux/clk.h> +#include <linux/mfd/core.h> + +#include <linux/jz4740-adc.h> + + +#define JZ_REG_ADC_ENABLE 0x00 +#define JZ_REG_ADC_CFG 0x04 +#define JZ_REG_ADC_CTRL 0x08 +#define JZ_REG_ADC_STATUS 0x0c + +#define JZ_REG_ADC_TOUCHSCREEN_BASE 0x10 +#define JZ_REG_ADC_BATTERY_BASE 0x1c +#define JZ_REG_ADC_HWMON_BASE 0x20 + +#define JZ_ADC_ENABLE_TOUCH BIT(2) +#define JZ_ADC_ENABLE_BATTERY BIT(1) +#define JZ_ADC_ENABLE_ADCIN BIT(0) + +enum { + JZ_ADC_IRQ_ADCIN = 0, + JZ_ADC_IRQ_BATTERY, + JZ_ADC_IRQ_TOUCH, + JZ_ADC_IRQ_PENUP, + JZ_ADC_IRQ_PENDOWN, +}; + +struct jz4740_adc { + struct resource *mem; + void __iomem *base; + + int irq; + int irq_base; + + struct clk *clk; + atomic_t clk_ref; + + spinlock_t lock; +}; + +static inline void jz4740_adc_irq_set_masked(struct jz4740_adc *adc, int irq, + bool masked) +{ + unsigned long flags; + uint8_t val; + + irq -= adc->irq_base; + + spin_lock_irqsave(&adc->lock, flags); + + val = readb(adc->base + JZ_REG_ADC_CTRL); + if (masked) + val |= BIT(irq); + else + val &= ~BIT(irq); + writeb(val, adc->base + JZ_REG_ADC_CTRL); + + spin_unlock_irqrestore(&adc->lock, flags); +} + +static void jz4740_adc_irq_mask(unsigned int irq) +{ + struct jz4740_adc *adc = get_irq_chip_data(irq); + jz4740_adc_irq_set_masked(adc, irq, true); +} + +static void jz4740_adc_irq_unmask(unsigned int irq) +{ + struct jz4740_adc *adc = get_irq_chip_data(irq); + jz4740_adc_irq_set_masked(adc, irq, false); +} + +static void jz4740_adc_irq_ack(unsigned int irq) +{ + struct jz4740_adc *adc = get_irq_chip_data(irq); + + irq -= adc->irq_base; + writeb(BIT(irq), adc->base + JZ_REG_ADC_STATUS); +} + +static struct irq_chip jz4740_adc_irq_chip = { + .name = "jz4740-adc", + .mask = jz4740_adc_irq_mask, + .unmask = jz4740_adc_irq_unmask, + .ack = jz4740_adc_irq_ack, +}; + +static void jz4740_adc_irq_demux(unsigned int irq, struct irq_desc *desc) +{ + struct jz4740_adc *adc = get_irq_desc_data(desc); + uint8_t status; + unsigned int i; + + status = readb(adc->base + JZ_REG_ADC_STATUS); + + for (i = 0; i < 5; ++i) { + if (status & BIT(i)) + generic_handle_irq(adc->irq_base + i); + } +} + + +/* Refcounting for the ADC clock is done in here instead of in the clock + * framework, because it is the only clock which is shared between multiple + * devices and thus is the only clock which needs refcounting */ +static inline void jz4740_adc_clk_enable(struct jz4740_adc *adc) +{ + if (atomic_inc_return(&adc->clk_ref) == 1) + clk_enable(adc->clk); +} + +static inline void jz4740_adc_clk_disable(struct jz4740_adc *adc) +{ + if (atomic_dec_return(&adc->clk_ref) == 0) + clk_disable(adc->clk); +} + +static inline void jz4740_adc_set_enabled(struct jz4740_adc *adc, int engine, + bool enabled) +{ + unsigned long flags; + uint8_t val; + + spin_lock_irqsave(&adc->lock, flags); + + val = readb(adc->base + JZ_REG_ADC_ENABLE); + if (enabled) + val |= BIT(engine); + else + val &= BIT(engine); + writeb(val, adc->base + JZ_REG_ADC_ENABLE); + + spin_unlock_irqrestore(&adc->lock, flags); +} + +static int jz4740_adc_cell_enable(struct platform_device *pdev) +{ + struct jz4740_adc *adc = dev_get_drvdata(pdev->dev.parent); + + jz4740_adc_clk_enable(adc); + jz4740_adc_set_enabled(adc, pdev->id, true); + + return 0; +} + +static int jz4740_adc_cell_disable(struct platform_device *pdev) +{ + struct jz4740_adc *adc = dev_get_drvdata(pdev->dev.parent); + + jz4740_adc_set_enabled(adc, pdev->id, false); + jz4740_adc_clk_disable(adc); + + return 0; +} + +int jz4740_adc_set_config(struct device *dev, uint32_t mask, uint32_t val) +{ + struct jz4740_adc *adc = dev_get_drvdata(dev); + unsigned long flags; + uint32_t cfg; + + if (!adc) + return -ENODEV; + + spin_lock_irqsave(&adc->lock, flags); + + cfg = readl(adc->base + JZ_REG_ADC_CFG); + + cfg &= ~mask; + cfg |= val; + + writel(cfg, adc->base + JZ_REG_ADC_CFG); + + spin_unlock_irqrestore(&adc->lock, flags); + + return 0; +} +EXPORT_SYMBOL_GPL(jz4740_adc_set_config); + +static struct resource jz4740_hwmon_resources[] = { + { + .start = JZ_ADC_IRQ_ADCIN, + .flags = IORESOURCE_IRQ, + }, + { + .start = JZ_REG_ADC_HWMON_BASE, + .end = JZ_REG_ADC_HWMON_BASE + 3, + .flags = IORESOURCE_MEM, + }, +}; + +static struct resource jz4740_battery_resources[] = { + { + .start = JZ_ADC_IRQ_BATTERY, + .flags = IORESOURCE_IRQ, + }, + { + .start = JZ_REG_ADC_BATTERY_BASE, + .end = JZ_REG_ADC_BATTERY_BASE + 3, + .flags = IORESOURCE_MEM, + }, +}; + +const struct mfd_cell jz4740_adc_cells[] = { + { + .id = 0, + .name = "jz4740-hwmon", + .num_resources = ARRAY_SIZE(jz4740_hwmon_resources), + .resources = jz4740_hwmon_resources, + .platform_data = (void *)&jz4740_adc_cells[0], + .data_size = sizeof(struct mfd_cell), + + .enable = jz4740_adc_cell_enable, + .disable = jz4740_adc_cell_disable, + }, + { + .id = 1, + .name = "jz4740-battery", + .num_resources = ARRAY_SIZE(jz4740_battery_resources), + .resources = jz4740_battery_resources, + .platform_data = (void *)&jz4740_adc_cells[1], + .data_size = sizeof(struct mfd_cell), + + .enable = jz4740_adc_cell_enable, + .disable = jz4740_adc_cell_disable, + }, +}; + +static int __devinit jz4740_adc_probe(struct platform_device *pdev) +{ + int ret; + struct jz4740_adc *adc; + struct resource *mem_base; + int irq; + + adc = kmalloc(sizeof(*adc), GFP_KERNEL); + if (!adc) { + dev_err(&pdev->dev, "Failed to allocate driver structure\n"); + return -ENOMEM; + } + + adc->irq = platform_get_irq(pdev, 0); + if (adc->irq < 0) { + ret = adc->irq; + dev_err(&pdev->dev, "Failed to get platform irq: %d\n", ret); + goto err_free; + } + + adc->irq_base = platform_get_irq(pdev, 1); + if (adc->irq_base < 0) { + ret = adc->irq_base; + dev_err(&pdev->dev, "Failed to get irq base: %d\n", ret); + goto err_free; + } + + mem_base = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem_base) { + ret = -ENOENT; + dev_err(&pdev->dev, "Failed to get platform mmio resource\n"); + goto err_free; + } + + /* Only request the shared registers for the MFD driver */ + adc->mem = request_mem_region(mem_base->start, JZ_REG_ADC_STATUS, + pdev->name); + if (!adc->mem) { + ret = -EBUSY; + dev_err(&pdev->dev, "Failed to request mmio memory region\n"); + goto err_free; + } + + adc->base = ioremap_nocache(adc->mem->start, resource_size(adc->mem)); + if (!adc->base) { + ret = -EBUSY; + dev_err(&pdev->dev, "Failed to ioremap mmio memory\n"); + goto err_release_mem_region; + } + + adc->clk = clk_get(&pdev->dev, "adc"); + if (IS_ERR(adc->clk)) { + ret = PTR_ERR(adc->clk); + dev_err(&pdev->dev, "Failed to get clock: %d\n", ret); + goto err_iounmap; + } + + spin_lock_init(&adc->lock); + atomic_set(&adc->clk_ref, 0); + + platform_set_drvdata(pdev, adc); + + for (irq = adc->irq_base; irq < adc->irq_base + 5; ++irq) { + set_irq_chip_data(irq, adc); + set_irq_chip_and_handler(irq, &jz4740_adc_irq_chip, + handle_level_irq); + } + + set_irq_data(adc->irq, adc); + set_irq_chained_handler(adc->irq, jz4740_adc_irq_demux); + + writeb(0x00, adc->base + JZ_REG_ADC_ENABLE); + writeb(0xff, adc->base + JZ_REG_ADC_CTRL); + + ret = mfd_add_devices(&pdev->dev, 0, jz4740_adc_cells, + ARRAY_SIZE(jz4740_adc_cells), mem_base, adc->irq_base); + if (ret < 0) + goto err_clk_put; + + return 0; + +err_clk_put: + clk_put(adc->clk); +err_iounmap: + platform_set_drvdata(pdev, NULL); + iounmap(adc->base); +err_release_mem_region: + release_mem_region(adc->mem->start, resource_size(adc->mem)); +err_free: + kfree(adc); + + return ret; +} + +static int __devexit jz4740_adc_remove(struct platform_device *pdev) +{ + struct jz4740_adc *adc = platform_get_drvdata(pdev); + + mfd_remove_devices(&pdev->dev); + + set_irq_data(adc->irq, NULL); + set_irq_chained_handler(adc->irq, NULL); + + iounmap(adc->base); + release_mem_region(adc->mem->start, resource_size(adc->mem)); + + clk_put(adc->clk); + + platform_set_drvdata(pdev, NULL); + + kfree(adc); + + return 0; +} + +struct platform_driver jz4740_adc_driver = { + .probe = jz4740_adc_probe, + .remove = __devexit_p(jz4740_adc_remove), + .driver = { + .name = "jz4740-adc", + .owner = THIS_MODULE, + }, +}; + +static int __init jz4740_adc_init(void) +{ + return platform_driver_register(&jz4740_adc_driver); +} +module_init(jz4740_adc_init); + +static void __exit jz4740_adc_exit(void) +{ + platform_driver_unregister(&jz4740_adc_driver); +} +module_exit(jz4740_adc_exit); + +MODULE_DESCRIPTION("JZ4740 SoC ADC driver"); +MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:jz4740-adc"); diff --git a/drivers/mfd/max8925-core.c b/drivers/mfd/max8925-core.c index f621bcea3d0..04028a9ee08 100644 --- a/drivers/mfd/max8925-core.c +++ b/drivers/mfd/max8925-core.c @@ -90,6 +90,24 @@ static struct mfd_cell rtc_devs[] = { }, }; +static struct resource onkey_resources[] = { + { + .name = "max8925-onkey", + .start = MAX8925_IRQ_GPM_SW_3SEC, + .end = MAX8925_IRQ_GPM_SW_3SEC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mfd_cell onkey_devs[] = { + { + .name = "max8925-onkey", + .num_resources = 1, + .resources = &onkey_resources[0], + .id = -1, + }, +}; + #define MAX8925_REG_RESOURCE(_start, _end) \ { \ .start = MAX8925_##_start, \ @@ -596,6 +614,15 @@ int __devinit max8925_device_init(struct max8925_chip *chip, dev_err(chip->dev, "Failed to add rtc subdev\n"); goto out; } + + ret = mfd_add_devices(chip->dev, 0, &onkey_devs[0], + ARRAY_SIZE(onkey_devs), + &onkey_resources[0], 0); + if (ret < 0) { + dev_err(chip->dev, "Failed to add onkey subdev\n"); + goto out_dev; + } + if (pdata && pdata->regulator[0]) { ret = mfd_add_devices(chip->dev, 0, ®ulator_devs[0], ARRAY_SIZE(regulator_devs), diff --git a/drivers/mfd/mc13783-core.c b/drivers/mfd/mc13783-core.c index fecf38a4f02..6df34989c1f 100644 --- a/drivers/mfd/mc13783-core.c +++ b/drivers/mfd/mc13783-core.c @@ -11,9 +11,31 @@ */ #include <linux/slab.h> #include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/mutex.h> +#include <linux/interrupt.h> #include <linux/spi/spi.h> #include <linux/mfd/core.h> -#include <linux/mfd/mc13783-private.h> +#include <linux/mfd/mc13783.h> + +struct mc13783 { + struct spi_device *spidev; + struct mutex lock; + int irq; + int flags; + + irq_handler_t irqhandler[MC13783_NUM_IRQ]; + void *irqdata[MC13783_NUM_IRQ]; + + /* XXX these should go as platformdata to the regulator subdevice */ + struct mc13783_regulator_init_data *regulators; + int num_regulators; +}; + +#define MC13783_REG_REVISION 7 +#define MC13783_REG_ADC_0 43 +#define MC13783_REG_ADC_1 44 +#define MC13783_REG_ADC_2 45 #define MC13783_IRQSTAT0 0 #define MC13783_IRQSTAT0_ADCDONEI (1 << 0) @@ -226,6 +248,12 @@ int mc13783_reg_rmw(struct mc13783 *mc13783, unsigned int offset, } EXPORT_SYMBOL(mc13783_reg_rmw); +int mc13783_get_flags(struct mc13783 *mc13783) +{ + return mc13783->flags; +} +EXPORT_SYMBOL(mc13783_get_flags); + int mc13783_irq_mask(struct mc13783 *mc13783, int irq) { int ret; diff --git a/drivers/mfd/menelaus.c b/drivers/mfd/menelaus.c index a3fb4bcb988..4ba85bbdb4c 100644 --- a/drivers/mfd/menelaus.c +++ b/drivers/mfd/menelaus.c @@ -128,6 +128,39 @@ #define MENELAUS_RESERVED14_IRQ 14 /* Reserved */ #define MENELAUS_RESERVED15_IRQ 15 /* Reserved */ +/* VCORE_CTRL1 register */ +#define VCORE_CTRL1_BYP_COMP (1 << 5) +#define VCORE_CTRL1_HW_NSW (1 << 7) + +/* GPIO_CTRL register */ +#define GPIO_CTRL_SLOTSELEN (1 << 5) +#define GPIO_CTRL_SLPCTLEN (1 << 6) +#define GPIO1_DIR_INPUT (1 << 0) +#define GPIO2_DIR_INPUT (1 << 1) +#define GPIO3_DIR_INPUT (1 << 2) + +/* MCT_CTRL1 register */ +#define MCT_CTRL1_S1_CMD_OD (1 << 2) +#define MCT_CTRL1_S2_CMD_OD (1 << 3) + +/* MCT_CTRL2 register */ +#define MCT_CTRL2_VS2_SEL_D0 (1 << 0) +#define MCT_CTRL2_VS2_SEL_D1 (1 << 1) +#define MCT_CTRL2_S1CD_BUFEN (1 << 4) +#define MCT_CTRL2_S2CD_BUFEN (1 << 5) +#define MCT_CTRL2_S1CD_DBEN (1 << 6) +#define MCT_CTRL2_S2CD_BEN (1 << 7) + +/* MCT_CTRL3 register */ +#define MCT_CTRL3_SLOT1_EN (1 << 0) +#define MCT_CTRL3_SLOT2_EN (1 << 1) +#define MCT_CTRL3_S1_AUTO_EN (1 << 2) +#define MCT_CTRL3_S2_AUTO_EN (1 << 3) + +/* MCT_PIN_ST register */ +#define MCT_PIN_ST_S1_CD_ST (1 << 0) +#define MCT_PIN_ST_S2_CD_ST (1 << 1) + static void menelaus_work(struct work_struct *_menelaus); struct menelaus_chip { @@ -249,10 +282,10 @@ static void menelaus_mmc_cd_work(struct menelaus_chip *menelaus_hw) return; if (!(reg & 0x1)) - card_mask |= (1 << 0); + card_mask |= MCT_PIN_ST_S1_CD_ST; if (!(reg & 0x2)) - card_mask |= (1 << 1); + card_mask |= MCT_PIN_ST_S2_CD_ST; if (menelaus_hw->mmc_callback) menelaus_hw->mmc_callback(menelaus_hw->mmc_callback_data, @@ -277,14 +310,14 @@ int menelaus_set_mmc_opendrain(int slot, int enable) val = ret; if (slot == 1) { if (enable) - val |= 1 << 2; + val |= MCT_CTRL1_S1_CMD_OD; else - val &= ~(1 << 2); + val &= ~MCT_CTRL1_S1_CMD_OD; } else { if (enable) - val |= 1 << 3; + val |= MCT_CTRL1_S2_CMD_OD; else - val &= ~(1 << 3); + val &= ~MCT_CTRL1_S2_CMD_OD; } ret = menelaus_write_reg(MENELAUS_MCT_CTRL1, val); mutex_unlock(&the_menelaus->lock); @@ -301,11 +334,11 @@ int menelaus_set_slot_sel(int enable) ret = menelaus_read_reg(MENELAUS_GPIO_CTRL); if (ret < 0) goto out; - ret |= 0x02; + ret |= GPIO2_DIR_INPUT; if (enable) - ret |= 1 << 5; + ret |= GPIO_CTRL_SLOTSELEN; else - ret &= ~(1 << 5); + ret &= ~GPIO_CTRL_SLOTSELEN; ret = menelaus_write_reg(MENELAUS_GPIO_CTRL, ret); out: mutex_unlock(&the_menelaus->lock); @@ -330,14 +363,14 @@ int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_en) val = ret; if (slot == 1) { if (cd_en) - val |= (1 << 4) | (1 << 6); + val |= MCT_CTRL2_S1CD_BUFEN | MCT_CTRL2_S1CD_DBEN; else - val &= ~((1 << 4) | (1 << 6)); + val &= ~(MCT_CTRL2_S1CD_BUFEN | MCT_CTRL2_S1CD_DBEN); } else { if (cd_en) - val |= (1 << 5) | (1 << 7); + val |= MCT_CTRL2_S2CD_BUFEN | MCT_CTRL2_S2CD_BEN; else - val &= ~((1 << 5) | (1 << 7)); + val &= ~(MCT_CTRL2_S2CD_BUFEN | MCT_CTRL2_S2CD_BEN); } ret = menelaus_write_reg(MENELAUS_MCT_CTRL2, val); if (ret < 0) @@ -349,25 +382,25 @@ int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_en) val = ret; if (slot == 1) { if (enable) - val |= 1 << 0; + val |= MCT_CTRL3_SLOT1_EN; else - val &= ~(1 << 0); + val &= ~MCT_CTRL3_SLOT1_EN; } else { int b; if (enable) - ret |= 1 << 1; + val |= MCT_CTRL3_SLOT2_EN; else - ret &= ~(1 << 1); + val &= ~MCT_CTRL3_SLOT2_EN; b = menelaus_read_reg(MENELAUS_MCT_CTRL2); - b &= ~0x03; + b &= ~(MCT_CTRL2_VS2_SEL_D0 | MCT_CTRL2_VS2_SEL_D1); b |= power; ret = menelaus_write_reg(MENELAUS_MCT_CTRL2, b); if (ret < 0) goto out; } /* Disable autonomous shutdown */ - val &= ~(0x03 << 2); + val &= ~(MCT_CTRL3_S1_AUTO_EN | MCT_CTRL3_S2_AUTO_EN); ret = menelaus_write_reg(MENELAUS_MCT_CTRL3, val); out: mutex_unlock(&the_menelaus->lock); @@ -552,7 +585,7 @@ int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV) if (!the_menelaus->vcore_hw_mode) { val = menelaus_read_reg(MENELAUS_VCORE_CTRL1); /* HW mode, turn OFF byte comparator */ - val |= ((1 << 7) | (1 << 5)); + val |= (VCORE_CTRL1_HW_NSW | VCORE_CTRL1_BYP_COMP); ret = menelaus_write_reg(MENELAUS_VCORE_CTRL1, val); the_menelaus->vcore_hw_mode = 1; } @@ -749,7 +782,7 @@ int menelaus_set_regulator_sleep(int enable, u32 val) ret = menelaus_read_reg(MENELAUS_GPIO_CTRL); if (ret < 0) goto out; - t = ((1 << 6) | 0x04); + t = (GPIO_CTRL_SLPCTLEN | GPIO3_DIR_INPUT); if (enable) ret |= t; else diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c index 7dd76bceaae..1823a57b7d8 100644 --- a/drivers/mfd/mfd-core.c +++ b/drivers/mfd/mfd-core.c @@ -70,7 +70,9 @@ static int mfd_add_device(struct device *parent, int id, goto fail_res; } - platform_device_add_resources(pdev, res, cell->num_resources); + ret = platform_device_add_resources(pdev, res, cell->num_resources); + if (ret) + goto fail_res; ret = platform_device_add(pdev); if (ret) diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c new file mode 100644 index 00000000000..0754c5e9199 --- /dev/null +++ b/drivers/mfd/stmpe.c @@ -0,0 +1,985 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License, version 2 + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/mfd/core.h> +#include <linux/mfd/stmpe.h> +#include "stmpe.h" + +static int __stmpe_enable(struct stmpe *stmpe, unsigned int blocks) +{ + return stmpe->variant->enable(stmpe, blocks, true); +} + +static int __stmpe_disable(struct stmpe *stmpe, unsigned int blocks) +{ + return stmpe->variant->enable(stmpe, blocks, false); +} + +static int __stmpe_reg_read(struct stmpe *stmpe, u8 reg) +{ + int ret; + + ret = i2c_smbus_read_byte_data(stmpe->i2c, reg); + if (ret < 0) + dev_err(stmpe->dev, "failed to read reg %#x: %d\n", + reg, ret); + + dev_vdbg(stmpe->dev, "rd: reg %#x => data %#x\n", reg, ret); + + return ret; +} + +static int __stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val) +{ + int ret; + + dev_vdbg(stmpe->dev, "wr: reg %#x <= %#x\n", reg, val); + + ret = i2c_smbus_write_byte_data(stmpe->i2c, reg, val); + if (ret < 0) + dev_err(stmpe->dev, "failed to write reg %#x: %d\n", + reg, ret); + + return ret; +} + +static int __stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val) +{ + int ret; + + ret = __stmpe_reg_read(stmpe, reg); + if (ret < 0) + return ret; + + ret &= ~mask; + ret |= val; + + return __stmpe_reg_write(stmpe, reg, ret); +} + +static int __stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length, + u8 *values) +{ + int ret; + + ret = i2c_smbus_read_i2c_block_data(stmpe->i2c, reg, length, values); + if (ret < 0) + dev_err(stmpe->dev, "failed to read regs %#x: %d\n", + reg, ret); + + dev_vdbg(stmpe->dev, "rd: reg %#x (%d) => ret %#x\n", reg, length, ret); + stmpe_dump_bytes("stmpe rd: ", values, length); + + return ret; +} + +static int __stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length, + const u8 *values) +{ + int ret; + + dev_vdbg(stmpe->dev, "wr: regs %#x (%d)\n", reg, length); + stmpe_dump_bytes("stmpe wr: ", values, length); + + ret = i2c_smbus_write_i2c_block_data(stmpe->i2c, reg, length, + values); + if (ret < 0) + dev_err(stmpe->dev, "failed to write regs %#x: %d\n", + reg, ret); + + return ret; +} + +/** + * stmpe_enable - enable blocks on an STMPE device + * @stmpe: Device to work on + * @blocks: Mask of blocks (enum stmpe_block values) to enable + */ +int stmpe_enable(struct stmpe *stmpe, unsigned int blocks) +{ + int ret; + + mutex_lock(&stmpe->lock); + ret = __stmpe_enable(stmpe, blocks); + mutex_unlock(&stmpe->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(stmpe_enable); + +/** + * stmpe_disable - disable blocks on an STMPE device + * @stmpe: Device to work on + * @blocks: Mask of blocks (enum stmpe_block values) to enable + */ +int stmpe_disable(struct stmpe *stmpe, unsigned int blocks) +{ + int ret; + + mutex_lock(&stmpe->lock); + ret = __stmpe_disable(stmpe, blocks); + mutex_unlock(&stmpe->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(stmpe_disable); + +/** + * stmpe_reg_read() - read a single STMPE register + * @stmpe: Device to read from + * @reg: Register to read + */ +int stmpe_reg_read(struct stmpe *stmpe, u8 reg) +{ + int ret; + + mutex_lock(&stmpe->lock); + ret = __stmpe_reg_read(stmpe, reg); + mutex_unlock(&stmpe->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(stmpe_reg_read); + +/** + * stmpe_reg_write() - write a single STMPE register + * @stmpe: Device to write to + * @reg: Register to write + * @val: Value to write + */ +int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val) +{ + int ret; + + mutex_lock(&stmpe->lock); + ret = __stmpe_reg_write(stmpe, reg, val); + mutex_unlock(&stmpe->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(stmpe_reg_write); + +/** + * stmpe_set_bits() - set the value of a bitfield in a STMPE register + * @stmpe: Device to write to + * @reg: Register to write + * @mask: Mask of bits to set + * @val: Value to set + */ +int stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val) +{ + int ret; + + mutex_lock(&stmpe->lock); + ret = __stmpe_set_bits(stmpe, reg, mask, val); + mutex_unlock(&stmpe->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(stmpe_set_bits); + +/** + * stmpe_block_read() - read multiple STMPE registers + * @stmpe: Device to read from + * @reg: First register + * @length: Number of registers + * @values: Buffer to write to + */ +int stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length, u8 *values) +{ + int ret; + + mutex_lock(&stmpe->lock); + ret = __stmpe_block_read(stmpe, reg, length, values); + mutex_unlock(&stmpe->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(stmpe_block_read); + +/** + * stmpe_block_write() - write multiple STMPE registers + * @stmpe: Device to write to + * @reg: First register + * @length: Number of registers + * @values: Values to write + */ +int stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length, + const u8 *values) +{ + int ret; + + mutex_lock(&stmpe->lock); + ret = __stmpe_block_write(stmpe, reg, length, values); + mutex_unlock(&stmpe->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(stmpe_block_write); + +/** + * stmpe_set_altfunc: set the alternate function for STMPE pins + * @stmpe: Device to configure + * @pins: Bitmask of pins to affect + * @block: block to enable alternate functions for + * + * @pins is assumed to have a bit set for each of the bits whose alternate + * function is to be changed, numbered according to the GPIOXY numbers. + * + * If the GPIO module is not enabled, this function automatically enables it in + * order to perform the change. + */ +int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins, enum stmpe_block block) +{ + struct stmpe_variant_info *variant = stmpe->variant; + u8 regaddr = stmpe->regs[STMPE_IDX_GPAFR_U_MSB]; + int af_bits = variant->af_bits; + int numregs = DIV_ROUND_UP(stmpe->num_gpios * af_bits, 8); + int afperreg = 8 / af_bits; + int mask = (1 << af_bits) - 1; + u8 regs[numregs]; + int af; + int ret; + + mutex_lock(&stmpe->lock); + + ret = __stmpe_enable(stmpe, STMPE_BLOCK_GPIO); + if (ret < 0) + goto out; + + ret = __stmpe_block_read(stmpe, regaddr, numregs, regs); + if (ret < 0) + goto out; + + af = variant->get_altfunc(stmpe, block); + + while (pins) { + int pin = __ffs(pins); + int regoffset = numregs - (pin / afperreg) - 1; + int pos = (pin % afperreg) * (8 / afperreg); + + regs[regoffset] &= ~(mask << pos); + regs[regoffset] |= af << pos; + + pins &= ~(1 << pin); + } + + ret = __stmpe_block_write(stmpe, regaddr, numregs, regs); + +out: + mutex_unlock(&stmpe->lock); + return ret; +} +EXPORT_SYMBOL_GPL(stmpe_set_altfunc); + +/* + * GPIO (all variants) + */ + +static struct resource stmpe_gpio_resources[] = { + /* Start and end filled dynamically */ + { + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mfd_cell stmpe_gpio_cell = { + .name = "stmpe-gpio", + .resources = stmpe_gpio_resources, + .num_resources = ARRAY_SIZE(stmpe_gpio_resources), +}; + +/* + * Keypad (1601, 2401, 2403) + */ + +static struct resource stmpe_keypad_resources[] = { + { + .name = "KEYPAD", + .start = 0, + .end = 0, + .flags = IORESOURCE_IRQ, + }, + { + .name = "KEYPAD_OVER", + .start = 1, + .end = 1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mfd_cell stmpe_keypad_cell = { + .name = "stmpe-keypad", + .resources = stmpe_keypad_resources, + .num_resources = ARRAY_SIZE(stmpe_keypad_resources), +}; + +/* + * Touchscreen (STMPE811) + */ + +static struct resource stmpe_ts_resources[] = { + { + .name = "TOUCH_DET", + .start = 0, + .end = 0, + .flags = IORESOURCE_IRQ, + }, + { + .name = "FIFO_TH", + .start = 1, + .end = 1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mfd_cell stmpe_ts_cell = { + .name = "stmpe-ts", + .resources = stmpe_ts_resources, + .num_resources = ARRAY_SIZE(stmpe_ts_resources), +}; + +/* + * STMPE811 + */ + +static const u8 stmpe811_regs[] = { + [STMPE_IDX_CHIP_ID] = STMPE811_REG_CHIP_ID, + [STMPE_IDX_ICR_LSB] = STMPE811_REG_INT_CTRL, + [STMPE_IDX_IER_LSB] = STMPE811_REG_INT_EN, + [STMPE_IDX_ISR_MSB] = STMPE811_REG_INT_STA, + [STMPE_IDX_GPMR_LSB] = STMPE811_REG_GPIO_MP_STA, + [STMPE_IDX_GPSR_LSB] = STMPE811_REG_GPIO_SET_PIN, + [STMPE_IDX_GPCR_LSB] = STMPE811_REG_GPIO_CLR_PIN, + [STMPE_IDX_GPDR_LSB] = STMPE811_REG_GPIO_DIR, + [STMPE_IDX_GPRER_LSB] = STMPE811_REG_GPIO_RE, + [STMPE_IDX_GPFER_LSB] = STMPE811_REG_GPIO_FE, + [STMPE_IDX_GPAFR_U_MSB] = STMPE811_REG_GPIO_AF, + [STMPE_IDX_IEGPIOR_LSB] = STMPE811_REG_GPIO_INT_EN, + [STMPE_IDX_ISGPIOR_MSB] = STMPE811_REG_GPIO_INT_STA, + [STMPE_IDX_GPEDR_MSB] = STMPE811_REG_GPIO_ED, +}; + +static struct stmpe_variant_block stmpe811_blocks[] = { + { + .cell = &stmpe_gpio_cell, + .irq = STMPE811_IRQ_GPIOC, + .block = STMPE_BLOCK_GPIO, + }, + { + .cell = &stmpe_ts_cell, + .irq = STMPE811_IRQ_TOUCH_DET, + .block = STMPE_BLOCK_TOUCHSCREEN, + }, +}; + +static int stmpe811_enable(struct stmpe *stmpe, unsigned int blocks, + bool enable) +{ + unsigned int mask = 0; + + if (blocks & STMPE_BLOCK_GPIO) + mask |= STMPE811_SYS_CTRL2_GPIO_OFF; + + if (blocks & STMPE_BLOCK_ADC) + mask |= STMPE811_SYS_CTRL2_ADC_OFF; + + if (blocks & STMPE_BLOCK_TOUCHSCREEN) + mask |= STMPE811_SYS_CTRL2_TSC_OFF; + + return __stmpe_set_bits(stmpe, STMPE811_REG_SYS_CTRL2, mask, + enable ? 0 : mask); +} + +static int stmpe811_get_altfunc(struct stmpe *stmpe, enum stmpe_block block) +{ + /* 0 for touchscreen, 1 for GPIO */ + return block != STMPE_BLOCK_TOUCHSCREEN; +} + +static struct stmpe_variant_info stmpe811 = { + .name = "stmpe811", + .id_val = 0x0811, + .id_mask = 0xffff, + .num_gpios = 8, + .af_bits = 1, + .regs = stmpe811_regs, + .blocks = stmpe811_blocks, + .num_blocks = ARRAY_SIZE(stmpe811_blocks), + .num_irqs = STMPE811_NR_INTERNAL_IRQS, + .enable = stmpe811_enable, + .get_altfunc = stmpe811_get_altfunc, +}; + +/* + * STMPE1601 + */ + +static const u8 stmpe1601_regs[] = { + [STMPE_IDX_CHIP_ID] = STMPE1601_REG_CHIP_ID, + [STMPE_IDX_ICR_LSB] = STMPE1601_REG_ICR_LSB, + [STMPE_IDX_IER_LSB] = STMPE1601_REG_IER_LSB, + [STMPE_IDX_ISR_MSB] = STMPE1601_REG_ISR_MSB, + [STMPE_IDX_GPMR_LSB] = STMPE1601_REG_GPIO_MP_LSB, + [STMPE_IDX_GPSR_LSB] = STMPE1601_REG_GPIO_SET_LSB, + [STMPE_IDX_GPCR_LSB] = STMPE1601_REG_GPIO_CLR_LSB, + [STMPE_IDX_GPDR_LSB] = STMPE1601_REG_GPIO_SET_DIR_LSB, + [STMPE_IDX_GPRER_LSB] = STMPE1601_REG_GPIO_RE_LSB, + [STMPE_IDX_GPFER_LSB] = STMPE1601_REG_GPIO_FE_LSB, + [STMPE_IDX_GPAFR_U_MSB] = STMPE1601_REG_GPIO_AF_U_MSB, + [STMPE_IDX_IEGPIOR_LSB] = STMPE1601_REG_INT_EN_GPIO_MASK_LSB, + [STMPE_IDX_ISGPIOR_MSB] = STMPE1601_REG_INT_STA_GPIO_MSB, + [STMPE_IDX_GPEDR_MSB] = STMPE1601_REG_GPIO_ED_MSB, +}; + +static struct stmpe_variant_block stmpe1601_blocks[] = { + { + .cell = &stmpe_gpio_cell, + .irq = STMPE24XX_IRQ_GPIOC, + .block = STMPE_BLOCK_GPIO, + }, + { + .cell = &stmpe_keypad_cell, + .irq = STMPE24XX_IRQ_KEYPAD, + .block = STMPE_BLOCK_KEYPAD, + }, +}; + +/* supported autosleep timeout delay (in msecs) */ +static const int stmpe_autosleep_delay[] = { + 4, 16, 32, 64, 128, 256, 512, 1024, +}; + +static int stmpe_round_timeout(int timeout) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(stmpe_autosleep_delay); i++) { + if (stmpe_autosleep_delay[i] >= timeout) + return i; + } + + /* + * requests for delays longer than supported should not return the + * longest supported delay + */ + return -EINVAL; +} + +static int stmpe_autosleep(struct stmpe *stmpe, int autosleep_timeout) +{ + int ret; + + if (!stmpe->variant->enable_autosleep) + return -ENOSYS; + + mutex_lock(&stmpe->lock); + ret = stmpe->variant->enable_autosleep(stmpe, autosleep_timeout); + mutex_unlock(&stmpe->lock); + + return ret; +} + +/* + * Both stmpe 1601/2403 support same layout for autosleep + */ +static int stmpe1601_autosleep(struct stmpe *stmpe, + int autosleep_timeout) +{ + int ret, timeout; + + /* choose the best available timeout */ + timeout = stmpe_round_timeout(autosleep_timeout); + if (timeout < 0) { + dev_err(stmpe->dev, "invalid timeout\n"); + return timeout; + } + + ret = __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL2, + STMPE1601_AUTOSLEEP_TIMEOUT_MASK, + timeout); + if (ret < 0) + return ret; + + return __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL2, + STPME1601_AUTOSLEEP_ENABLE, + STPME1601_AUTOSLEEP_ENABLE); +} + +static int stmpe1601_enable(struct stmpe *stmpe, unsigned int blocks, + bool enable) +{ + unsigned int mask = 0; + + if (blocks & STMPE_BLOCK_GPIO) + mask |= STMPE1601_SYS_CTRL_ENABLE_GPIO; + + if (blocks & STMPE_BLOCK_KEYPAD) + mask |= STMPE1601_SYS_CTRL_ENABLE_KPC; + + return __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL, mask, + enable ? mask : 0); +} + +static int stmpe1601_get_altfunc(struct stmpe *stmpe, enum stmpe_block block) +{ + switch (block) { + case STMPE_BLOCK_PWM: + return 2; + + case STMPE_BLOCK_KEYPAD: + return 1; + + case STMPE_BLOCK_GPIO: + default: + return 0; + } +} + +static struct stmpe_variant_info stmpe1601 = { + .name = "stmpe1601", + .id_val = 0x0210, + .id_mask = 0xfff0, /* at least 0x0210 and 0x0212 */ + .num_gpios = 16, + .af_bits = 2, + .regs = stmpe1601_regs, + .blocks = stmpe1601_blocks, + .num_blocks = ARRAY_SIZE(stmpe1601_blocks), + .num_irqs = STMPE1601_NR_INTERNAL_IRQS, + .enable = stmpe1601_enable, + .get_altfunc = stmpe1601_get_altfunc, + .enable_autosleep = stmpe1601_autosleep, +}; + +/* + * STMPE24XX + */ + +static const u8 stmpe24xx_regs[] = { + [STMPE_IDX_CHIP_ID] = STMPE24XX_REG_CHIP_ID, + [STMPE_IDX_ICR_LSB] = STMPE24XX_REG_ICR_LSB, + [STMPE_IDX_IER_LSB] = STMPE24XX_REG_IER_LSB, + [STMPE_IDX_ISR_MSB] = STMPE24XX_REG_ISR_MSB, + [STMPE_IDX_GPMR_LSB] = STMPE24XX_REG_GPMR_LSB, + [STMPE_IDX_GPSR_LSB] = STMPE24XX_REG_GPSR_LSB, + [STMPE_IDX_GPCR_LSB] = STMPE24XX_REG_GPCR_LSB, + [STMPE_IDX_GPDR_LSB] = STMPE24XX_REG_GPDR_LSB, + [STMPE_IDX_GPRER_LSB] = STMPE24XX_REG_GPRER_LSB, + [STMPE_IDX_GPFER_LSB] = STMPE24XX_REG_GPFER_LSB, + [STMPE_IDX_GPAFR_U_MSB] = STMPE24XX_REG_GPAFR_U_MSB, + [STMPE_IDX_IEGPIOR_LSB] = STMPE24XX_REG_IEGPIOR_LSB, + [STMPE_IDX_ISGPIOR_MSB] = STMPE24XX_REG_ISGPIOR_MSB, + [STMPE_IDX_GPEDR_MSB] = STMPE24XX_REG_GPEDR_MSB, +}; + +static struct stmpe_variant_block stmpe24xx_blocks[] = { + { + .cell = &stmpe_gpio_cell, + .irq = STMPE24XX_IRQ_GPIOC, + .block = STMPE_BLOCK_GPIO, + }, + { + .cell = &stmpe_keypad_cell, + .irq = STMPE24XX_IRQ_KEYPAD, + .block = STMPE_BLOCK_KEYPAD, + }, +}; + +static int stmpe24xx_enable(struct stmpe *stmpe, unsigned int blocks, + bool enable) +{ + unsigned int mask = 0; + + if (blocks & STMPE_BLOCK_GPIO) + mask |= STMPE24XX_SYS_CTRL_ENABLE_GPIO; + + if (blocks & STMPE_BLOCK_KEYPAD) + mask |= STMPE24XX_SYS_CTRL_ENABLE_KPC; + + return __stmpe_set_bits(stmpe, STMPE24XX_REG_SYS_CTRL, mask, + enable ? mask : 0); +} + +static int stmpe24xx_get_altfunc(struct stmpe *stmpe, enum stmpe_block block) +{ + switch (block) { + case STMPE_BLOCK_ROTATOR: + return 2; + + case STMPE_BLOCK_KEYPAD: + return 1; + + case STMPE_BLOCK_GPIO: + default: + return 0; + } +} + +static struct stmpe_variant_info stmpe2401 = { + .name = "stmpe2401", + .id_val = 0x0101, + .id_mask = 0xffff, + .num_gpios = 24, + .af_bits = 2, + .regs = stmpe24xx_regs, + .blocks = stmpe24xx_blocks, + .num_blocks = ARRAY_SIZE(stmpe24xx_blocks), + .num_irqs = STMPE24XX_NR_INTERNAL_IRQS, + .enable = stmpe24xx_enable, + .get_altfunc = stmpe24xx_get_altfunc, +}; + +static struct stmpe_variant_info stmpe2403 = { + .name = "stmpe2403", + .id_val = 0x0120, + .id_mask = 0xffff, + .num_gpios = 24, + .af_bits = 2, + .regs = stmpe24xx_regs, + .blocks = stmpe24xx_blocks, + .num_blocks = ARRAY_SIZE(stmpe24xx_blocks), + .num_irqs = STMPE24XX_NR_INTERNAL_IRQS, + .enable = stmpe24xx_enable, + .get_altfunc = stmpe24xx_get_altfunc, + .enable_autosleep = stmpe1601_autosleep, /* same as stmpe1601 */ +}; + +static struct stmpe_variant_info *stmpe_variant_info[] = { + [STMPE811] = &stmpe811, + [STMPE1601] = &stmpe1601, + [STMPE2401] = &stmpe2401, + [STMPE2403] = &stmpe2403, +}; + +static irqreturn_t stmpe_irq(int irq, void *data) +{ + struct stmpe *stmpe = data; + struct stmpe_variant_info *variant = stmpe->variant; + int num = DIV_ROUND_UP(variant->num_irqs, 8); + u8 israddr = stmpe->regs[STMPE_IDX_ISR_MSB]; + u8 isr[num]; + int ret; + int i; + + ret = stmpe_block_read(stmpe, israddr, num, isr); + if (ret < 0) + return IRQ_NONE; + + for (i = 0; i < num; i++) { + int bank = num - i - 1; + u8 status = isr[i]; + u8 clear; + + status &= stmpe->ier[bank]; + if (!status) + continue; + + clear = status; + while (status) { + int bit = __ffs(status); + int line = bank * 8 + bit; + + handle_nested_irq(stmpe->irq_base + line); + status &= ~(1 << bit); + } + + stmpe_reg_write(stmpe, israddr + i, clear); + } + + return IRQ_HANDLED; +} + +static void stmpe_irq_lock(unsigned int irq) +{ + struct stmpe *stmpe = get_irq_chip_data(irq); + + mutex_lock(&stmpe->irq_lock); +} + +static void stmpe_irq_sync_unlock(unsigned int irq) +{ + struct stmpe *stmpe = get_irq_chip_data(irq); + struct stmpe_variant_info *variant = stmpe->variant; + int num = DIV_ROUND_UP(variant->num_irqs, 8); + int i; + + for (i = 0; i < num; i++) { + u8 new = stmpe->ier[i]; + u8 old = stmpe->oldier[i]; + + if (new == old) + continue; + + stmpe->oldier[i] = new; + stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_IER_LSB] - i, new); + } + + mutex_unlock(&stmpe->irq_lock); +} + +static void stmpe_irq_mask(unsigned int irq) +{ + struct stmpe *stmpe = get_irq_chip_data(irq); + int offset = irq - stmpe->irq_base; + int regoffset = offset / 8; + int mask = 1 << (offset % 8); + + stmpe->ier[regoffset] &= ~mask; +} + +static void stmpe_irq_unmask(unsigned int irq) +{ + struct stmpe *stmpe = get_irq_chip_data(irq); + int offset = irq - stmpe->irq_base; + int regoffset = offset / 8; + int mask = 1 << (offset % 8); + + stmpe->ier[regoffset] |= mask; +} + +static struct irq_chip stmpe_irq_chip = { + .name = "stmpe", + .bus_lock = stmpe_irq_lock, + .bus_sync_unlock = stmpe_irq_sync_unlock, + .mask = stmpe_irq_mask, + .unmask = stmpe_irq_unmask, +}; + +static int __devinit stmpe_irq_init(struct stmpe *stmpe) +{ + int num_irqs = stmpe->variant->num_irqs; + int base = stmpe->irq_base; + int irq; + + for (irq = base; irq < base + num_irqs; irq++) { + set_irq_chip_data(irq, stmpe); + set_irq_chip_and_handler(irq, &stmpe_irq_chip, + handle_edge_irq); + set_irq_nested_thread(irq, 1); +#ifdef CONFIG_ARM + set_irq_flags(irq, IRQF_VALID); +#else + set_irq_noprobe(irq); +#endif + } + + return 0; +} + +static void stmpe_irq_remove(struct stmpe *stmpe) +{ + int num_irqs = stmpe->variant->num_irqs; + int base = stmpe->irq_base; + int irq; + + for (irq = base; irq < base + num_irqs; irq++) { +#ifdef CONFIG_ARM + set_irq_flags(irq, 0); +#endif + set_irq_chip_and_handler(irq, NULL, NULL); + set_irq_chip_data(irq, NULL); + } +} + +static int __devinit stmpe_chip_init(struct stmpe *stmpe) +{ + unsigned int irq_trigger = stmpe->pdata->irq_trigger; + int autosleep_timeout = stmpe->pdata->autosleep_timeout; + struct stmpe_variant_info *variant = stmpe->variant; + u8 icr = STMPE_ICR_LSB_GIM; + unsigned int id; + u8 data[2]; + int ret; + + ret = stmpe_block_read(stmpe, stmpe->regs[STMPE_IDX_CHIP_ID], + ARRAY_SIZE(data), data); + if (ret < 0) + return ret; + + id = (data[0] << 8) | data[1]; + if ((id & variant->id_mask) != variant->id_val) { + dev_err(stmpe->dev, "unknown chip id: %#x\n", id); + return -EINVAL; + } + + dev_info(stmpe->dev, "%s detected, chip id: %#x\n", variant->name, id); + + /* Disable all modules -- subdrivers should enable what they need. */ + ret = stmpe_disable(stmpe, ~0); + if (ret) + return ret; + + if (irq_trigger == IRQF_TRIGGER_FALLING || + irq_trigger == IRQF_TRIGGER_RISING) + icr |= STMPE_ICR_LSB_EDGE; + + if (irq_trigger == IRQF_TRIGGER_RISING || + irq_trigger == IRQF_TRIGGER_HIGH) + icr |= STMPE_ICR_LSB_HIGH; + + if (stmpe->pdata->irq_invert_polarity) + icr ^= STMPE_ICR_LSB_HIGH; + + if (stmpe->pdata->autosleep) { + ret = stmpe_autosleep(stmpe, autosleep_timeout); + if (ret) + return ret; + } + + return stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_ICR_LSB], icr); +} + +static int __devinit stmpe_add_device(struct stmpe *stmpe, + struct mfd_cell *cell, int irq) +{ + return mfd_add_devices(stmpe->dev, stmpe->pdata->id, cell, 1, + NULL, stmpe->irq_base + irq); +} + +static int __devinit stmpe_devices_init(struct stmpe *stmpe) +{ + struct stmpe_variant_info *variant = stmpe->variant; + unsigned int platform_blocks = stmpe->pdata->blocks; + int ret = -EINVAL; + int i; + + for (i = 0; i < variant->num_blocks; i++) { + struct stmpe_variant_block *block = &variant->blocks[i]; + + if (!(platform_blocks & block->block)) + continue; + + platform_blocks &= ~block->block; + ret = stmpe_add_device(stmpe, block->cell, block->irq); + if (ret) + return ret; + } + + if (platform_blocks) + dev_warn(stmpe->dev, + "platform wants blocks (%#x) not present on variant", + platform_blocks); + + return ret; +} + +static int __devinit stmpe_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct stmpe_platform_data *pdata = i2c->dev.platform_data; + struct stmpe *stmpe; + int ret; + + if (!pdata) + return -EINVAL; + + stmpe = kzalloc(sizeof(struct stmpe), GFP_KERNEL); + if (!stmpe) + return -ENOMEM; + + mutex_init(&stmpe->irq_lock); + mutex_init(&stmpe->lock); + + stmpe->dev = &i2c->dev; + stmpe->i2c = i2c; + + stmpe->pdata = pdata; + stmpe->irq_base = pdata->irq_base; + + stmpe->partnum = id->driver_data; + stmpe->variant = stmpe_variant_info[stmpe->partnum]; + stmpe->regs = stmpe->variant->regs; + stmpe->num_gpios = stmpe->variant->num_gpios; + + i2c_set_clientdata(i2c, stmpe); + + ret = stmpe_chip_init(stmpe); + if (ret) + goto out_free; + + ret = stmpe_irq_init(stmpe); + if (ret) + goto out_free; + + ret = request_threaded_irq(stmpe->i2c->irq, NULL, stmpe_irq, + pdata->irq_trigger | IRQF_ONESHOT, + "stmpe", stmpe); + if (ret) { + dev_err(stmpe->dev, "failed to request IRQ: %d\n", ret); + goto out_removeirq; + } + + ret = stmpe_devices_init(stmpe); + if (ret) { + dev_err(stmpe->dev, "failed to add children\n"); + goto out_removedevs; + } + + return 0; + +out_removedevs: + mfd_remove_devices(stmpe->dev); + free_irq(stmpe->i2c->irq, stmpe); +out_removeirq: + stmpe_irq_remove(stmpe); +out_free: + kfree(stmpe); + return ret; +} + +static int __devexit stmpe_remove(struct i2c_client *client) +{ + struct stmpe *stmpe = i2c_get_clientdata(client); + + mfd_remove_devices(stmpe->dev); + + free_irq(stmpe->i2c->irq, stmpe); + stmpe_irq_remove(stmpe); + + kfree(stmpe); + + return 0; +} + +static const struct i2c_device_id stmpe_id[] = { + { "stmpe811", STMPE811 }, + { "stmpe1601", STMPE1601 }, + { "stmpe2401", STMPE2401 }, + { "stmpe2403", STMPE2403 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, stmpe_id); + +static struct i2c_driver stmpe_driver = { + .driver.name = "stmpe", + .driver.owner = THIS_MODULE, + .probe = stmpe_probe, + .remove = __devexit_p(stmpe_remove), + .id_table = stmpe_id, +}; + +static int __init stmpe_init(void) +{ + return i2c_add_driver(&stmpe_driver); +} +subsys_initcall(stmpe_init); + +static void __exit stmpe_exit(void) +{ + i2c_del_driver(&stmpe_driver); +} +module_exit(stmpe_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("STMPE MFD core driver"); +MODULE_AUTHOR("Rabin Vincent <rabin.vincent@stericsson.com>"); diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h new file mode 100644 index 00000000000..0dbdc4e8cd7 --- /dev/null +++ b/drivers/mfd/stmpe.h @@ -0,0 +1,183 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License, version 2 + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + */ + +#ifndef __STMPE_H +#define __STMPE_H + +#ifdef STMPE_DUMP_BYTES +static inline void stmpe_dump_bytes(const char *str, const void *buf, + size_t len) +{ + print_hex_dump_bytes(str, DUMP_PREFIX_OFFSET, buf, len); +} +#else +static inline void stmpe_dump_bytes(const char *str, const void *buf, + size_t len) +{ +} +#endif + +/** + * struct stmpe_variant_block - information about block + * @cell: base mfd cell + * @irq: interrupt number to be added to each IORESOURCE_IRQ + * in the cell + * @block: block id; used for identification with platform data and for + * enable and altfunc callbacks + */ +struct stmpe_variant_block { + struct mfd_cell *cell; + int irq; + enum stmpe_block block; +}; + +/** + * struct stmpe_variant_info - variant-specific information + * @name: part name + * @id_val: content of CHIPID register + * @id_mask: bits valid in CHIPID register for comparison with id_val + * @num_gpios: number of GPIOS + * @af_bits: number of bits used to specify the alternate function + * @blocks: list of blocks present on this device + * @num_blocks: number of blocks present on this device + * @num_irqs: number of internal IRQs available on this device + * @enable: callback to enable the specified blocks. + * Called with the I/O lock held. + * @get_altfunc: callback to get the alternate function number for the + * specific block + * @enable_autosleep: callback to configure autosleep with specified timeout + */ +struct stmpe_variant_info { + const char *name; + u16 id_val; + u16 id_mask; + int num_gpios; + int af_bits; + const u8 *regs; + struct stmpe_variant_block *blocks; + int num_blocks; + int num_irqs; + int (*enable)(struct stmpe *stmpe, unsigned int blocks, bool enable); + int (*get_altfunc)(struct stmpe *stmpe, enum stmpe_block block); + int (*enable_autosleep)(struct stmpe *stmpe, int autosleep_timeout); +}; + +#define STMPE_ICR_LSB_HIGH (1 << 2) +#define STMPE_ICR_LSB_EDGE (1 << 1) +#define STMPE_ICR_LSB_GIM (1 << 0) + +/* + * STMPE811 + */ + +#define STMPE811_IRQ_TOUCH_DET 0 +#define STMPE811_IRQ_FIFO_TH 1 +#define STMPE811_IRQ_FIFO_OFLOW 2 +#define STMPE811_IRQ_FIFO_FULL 3 +#define STMPE811_IRQ_FIFO_EMPTY 4 +#define STMPE811_IRQ_TEMP_SENS 5 +#define STMPE811_IRQ_ADC 6 +#define STMPE811_IRQ_GPIOC 7 +#define STMPE811_NR_INTERNAL_IRQS 8 + +#define STMPE811_REG_CHIP_ID 0x00 +#define STMPE811_REG_SYS_CTRL2 0x04 +#define STMPE811_REG_INT_CTRL 0x09 +#define STMPE811_REG_INT_EN 0x0A +#define STMPE811_REG_INT_STA 0x0B +#define STMPE811_REG_GPIO_INT_EN 0x0C +#define STMPE811_REG_GPIO_INT_STA 0x0D +#define STMPE811_REG_GPIO_SET_PIN 0x10 +#define STMPE811_REG_GPIO_CLR_PIN 0x11 +#define STMPE811_REG_GPIO_MP_STA 0x12 +#define STMPE811_REG_GPIO_DIR 0x13 +#define STMPE811_REG_GPIO_ED 0x14 +#define STMPE811_REG_GPIO_RE 0x15 +#define STMPE811_REG_GPIO_FE 0x16 +#define STMPE811_REG_GPIO_AF 0x17 + +#define STMPE811_SYS_CTRL2_ADC_OFF (1 << 0) +#define STMPE811_SYS_CTRL2_TSC_OFF (1 << 1) +#define STMPE811_SYS_CTRL2_GPIO_OFF (1 << 2) +#define STMPE811_SYS_CTRL2_TS_OFF (1 << 3) + +/* + * STMPE1601 + */ + +#define STMPE1601_IRQ_GPIOC 8 +#define STMPE1601_IRQ_PWM3 7 +#define STMPE1601_IRQ_PWM2 6 +#define STMPE1601_IRQ_PWM1 5 +#define STMPE1601_IRQ_PWM0 4 +#define STMPE1601_IRQ_KEYPAD_OVER 2 +#define STMPE1601_IRQ_KEYPAD 1 +#define STMPE1601_IRQ_WAKEUP 0 +#define STMPE1601_NR_INTERNAL_IRQS 9 + +#define STMPE1601_REG_SYS_CTRL 0x02 +#define STMPE1601_REG_SYS_CTRL2 0x03 +#define STMPE1601_REG_ICR_LSB 0x11 +#define STMPE1601_REG_IER_LSB 0x13 +#define STMPE1601_REG_ISR_MSB 0x14 +#define STMPE1601_REG_CHIP_ID 0x80 +#define STMPE1601_REG_INT_EN_GPIO_MASK_LSB 0x17 +#define STMPE1601_REG_INT_STA_GPIO_MSB 0x18 +#define STMPE1601_REG_GPIO_MP_LSB 0x87 +#define STMPE1601_REG_GPIO_SET_LSB 0x83 +#define STMPE1601_REG_GPIO_CLR_LSB 0x85 +#define STMPE1601_REG_GPIO_SET_DIR_LSB 0x89 +#define STMPE1601_REG_GPIO_ED_MSB 0x8A +#define STMPE1601_REG_GPIO_RE_LSB 0x8D +#define STMPE1601_REG_GPIO_FE_LSB 0x8F +#define STMPE1601_REG_GPIO_AF_U_MSB 0x92 + +#define STMPE1601_SYS_CTRL_ENABLE_GPIO (1 << 3) +#define STMPE1601_SYS_CTRL_ENABLE_KPC (1 << 1) +#define STMPE1601_SYSCON_ENABLE_SPWM (1 << 0) + +/* The 1601/2403 share the same masks */ +#define STMPE1601_AUTOSLEEP_TIMEOUT_MASK (0x7) +#define STPME1601_AUTOSLEEP_ENABLE (1 << 3) + +/* + * STMPE24xx + */ + +#define STMPE24XX_IRQ_GPIOC 8 +#define STMPE24XX_IRQ_PWM2 7 +#define STMPE24XX_IRQ_PWM1 6 +#define STMPE24XX_IRQ_PWM0 5 +#define STMPE24XX_IRQ_ROT_OVER 4 +#define STMPE24XX_IRQ_ROT 3 +#define STMPE24XX_IRQ_KEYPAD_OVER 2 +#define STMPE24XX_IRQ_KEYPAD 1 +#define STMPE24XX_IRQ_WAKEUP 0 +#define STMPE24XX_NR_INTERNAL_IRQS 9 + +#define STMPE24XX_REG_SYS_CTRL 0x02 +#define STMPE24XX_REG_ICR_LSB 0x11 +#define STMPE24XX_REG_IER_LSB 0x13 +#define STMPE24XX_REG_ISR_MSB 0x14 +#define STMPE24XX_REG_CHIP_ID 0x80 +#define STMPE24XX_REG_IEGPIOR_LSB 0x18 +#define STMPE24XX_REG_ISGPIOR_MSB 0x19 +#define STMPE24XX_REG_GPMR_LSB 0xA5 +#define STMPE24XX_REG_GPSR_LSB 0x85 +#define STMPE24XX_REG_GPCR_LSB 0x88 +#define STMPE24XX_REG_GPDR_LSB 0x8B +#define STMPE24XX_REG_GPEDR_MSB 0x8C +#define STMPE24XX_REG_GPRER_LSB 0x91 +#define STMPE24XX_REG_GPFER_LSB 0x94 +#define STMPE24XX_REG_GPAFR_U_MSB 0x9B + +#define STMPE24XX_SYS_CTRL_ENABLE_GPIO (1 << 3) +#define STMPE24XX_SYSCON_ENABLE_PWM (1 << 2) +#define STMPE24XX_SYS_CTRL_ENABLE_KPC (1 << 1) +#define STMPE24XX_SYSCON_ENABLE_ROT (1 << 0) + +#endif diff --git a/drivers/mfd/t7l66xb.c b/drivers/mfd/t7l66xb.c index 5041d33adf0..006c121f3f0 100644 --- a/drivers/mfd/t7l66xb.c +++ b/drivers/mfd/t7l66xb.c @@ -350,7 +350,6 @@ static int t7l66xb_probe(struct platform_device *dev) t7l66xb->clk48m = clk_get(&dev->dev, "CLK_CK48M"); if (IS_ERR(t7l66xb->clk48m)) { ret = PTR_ERR(t7l66xb->clk48m); - clk_put(t7l66xb->clk32k); goto err_clk48m_get; } @@ -425,6 +424,8 @@ static int t7l66xb_remove(struct platform_device *dev) ret = pdata->disable(dev); clk_disable(t7l66xb->clk48m); clk_put(t7l66xb->clk48m); + clk_disable(t7l66xb->clk32k); + clk_put(t7l66xb->clk32k); t7l66xb_detach_irq(dev); iounmap(t7l66xb->scr); release_resource(&t7l66xb->rscr); diff --git a/drivers/mfd/tc6387xb.c b/drivers/mfd/tc6387xb.c index 517f9bcdeaa..6315f63f017 100644 --- a/drivers/mfd/tc6387xb.c +++ b/drivers/mfd/tc6387xb.c @@ -137,7 +137,7 @@ static struct mfd_cell tc6387xb_cells[] = { }, }; -static int tc6387xb_probe(struct platform_device *dev) +static int __devinit tc6387xb_probe(struct platform_device *dev) { struct tc6387xb_platform_data *pdata = dev->dev.platform_data; struct resource *iomem, *rscr; @@ -201,6 +201,7 @@ static int tc6387xb_probe(struct platform_device *dev) if (!ret) return 0; + iounmap(tc6387xb->scr); err_ioremap: release_resource(&tc6387xb->rscr); err_resource: @@ -211,14 +212,17 @@ err_no_irq: return ret; } -static int tc6387xb_remove(struct platform_device *dev) +static int __devexit tc6387xb_remove(struct platform_device *dev) { - struct clk *clk32k = platform_get_drvdata(dev); + struct tc6387xb *tc6387xb = platform_get_drvdata(dev); mfd_remove_devices(&dev->dev); - clk_disable(clk32k); - clk_put(clk32k); + iounmap(tc6387xb->scr); + release_resource(&tc6387xb->rscr); + clk_disable(tc6387xb->clk32k); + clk_put(tc6387xb->clk32k); platform_set_drvdata(dev, NULL); + kfree(tc6387xb); return 0; } @@ -229,7 +233,7 @@ static struct platform_driver tc6387xb_platform_driver = { .name = "tc6387xb", }, .probe = tc6387xb_probe, - .remove = tc6387xb_remove, + .remove = __devexit_p(tc6387xb_remove), .suspend = tc6387xb_suspend, .resume = tc6387xb_resume, }; diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c index fcf9068810f..ef6c42c8917 100644 --- a/drivers/mfd/tc6393xb.c +++ b/drivers/mfd/tc6393xb.c @@ -732,9 +732,9 @@ err_gpio_add: if (tc6393xb->gpio.base != -1) temp = gpiochip_remove(&tc6393xb->gpio); tcpd->disable(dev); -err_clk_enable: - clk_disable(tc6393xb->clk); err_enable: + clk_disable(tc6393xb->clk); +err_clk_enable: iounmap(tc6393xb->scr); err_ioremap: release_resource(&tc6393xb->rscr); diff --git a/drivers/mfd/tps6507x.c b/drivers/mfd/tps6507x.c index d859dffed39..fc019764928 100644 --- a/drivers/mfd/tps6507x.c +++ b/drivers/mfd/tps6507x.c @@ -89,10 +89,8 @@ static int tps6507x_i2c_probe(struct i2c_client *i2c, int ret = 0; tps6507x = kzalloc(sizeof(struct tps6507x_dev), GFP_KERNEL); - if (tps6507x == NULL) { - kfree(i2c); + if (tps6507x == NULL) return -ENOMEM; - } i2c_set_clientdata(i2c, tps6507x); tps6507x->dev = &i2c->dev; diff --git a/drivers/mfd/tps6586x.c b/drivers/mfd/tps6586x.c new file mode 100644 index 00000000000..4cde31e6a25 --- /dev/null +++ b/drivers/mfd/tps6586x.c @@ -0,0 +1,375 @@ +/* + * Core driver for TI TPS6586x PMIC family + * + * Copyright (c) 2010 CompuLab Ltd. + * Mike Rapoport <mike@compulab.co.il> + * + * Based on da903x.c. + * Copyright (C) 2008 Compulab, Ltd. + * Mike Rapoport <mike@compulab.co.il> + * Copyright (C) 2006-2008 Marvell International Ltd. + * Eric Miao <eric.miao@marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/slab.h> +#include <linux/gpio.h> +#include <linux/i2c.h> + +#include <linux/mfd/core.h> +#include <linux/mfd/tps6586x.h> + +/* GPIO control registers */ +#define TPS6586X_GPIOSET1 0x5d +#define TPS6586X_GPIOSET2 0x5e + +/* device id */ +#define TPS6586X_VERSIONCRC 0xcd +#define TPS658621A_VERSIONCRC 0x15 + +struct tps6586x { + struct mutex lock; + struct device *dev; + struct i2c_client *client; + + struct gpio_chip gpio; +}; + +static inline int __tps6586x_read(struct i2c_client *client, + int reg, uint8_t *val) +{ + int ret; + + ret = i2c_smbus_read_byte_data(client, reg); + if (ret < 0) { + dev_err(&client->dev, "failed reading at 0x%02x\n", reg); + return ret; + } + + *val = (uint8_t)ret; + + return 0; +} + +static inline int __tps6586x_reads(struct i2c_client *client, int reg, + int len, uint8_t *val) +{ + int ret; + + ret = i2c_smbus_read_i2c_block_data(client, reg, len, val); + if (ret < 0) { + dev_err(&client->dev, "failed reading from 0x%02x\n", reg); + return ret; + } + + return 0; +} + +static inline int __tps6586x_write(struct i2c_client *client, + int reg, uint8_t val) +{ + int ret; + + ret = i2c_smbus_write_byte_data(client, reg, val); + if (ret < 0) { + dev_err(&client->dev, "failed writing 0x%02x to 0x%02x\n", + val, reg); + return ret; + } + + return 0; +} + +static inline int __tps6586x_writes(struct i2c_client *client, int reg, + int len, uint8_t *val) +{ + int ret; + + ret = i2c_smbus_write_i2c_block_data(client, reg, len, val); + if (ret < 0) { + dev_err(&client->dev, "failed writings to 0x%02x\n", reg); + return ret; + } + + return 0; +} + +int tps6586x_write(struct device *dev, int reg, uint8_t val) +{ + return __tps6586x_write(to_i2c_client(dev), reg, val); +} +EXPORT_SYMBOL_GPL(tps6586x_write); + +int tps6586x_writes(struct device *dev, int reg, int len, uint8_t *val) +{ + return __tps6586x_writes(to_i2c_client(dev), reg, len, val); +} +EXPORT_SYMBOL_GPL(tps6586x_writes); + +int tps6586x_read(struct device *dev, int reg, uint8_t *val) +{ + return __tps6586x_read(to_i2c_client(dev), reg, val); +} +EXPORT_SYMBOL_GPL(tps6586x_read); + +int tps6586x_reads(struct device *dev, int reg, int len, uint8_t *val) +{ + return __tps6586x_reads(to_i2c_client(dev), reg, len, val); +} +EXPORT_SYMBOL_GPL(tps6586x_reads); + +int tps6586x_set_bits(struct device *dev, int reg, uint8_t bit_mask) +{ + struct tps6586x *tps6586x = dev_get_drvdata(dev); + uint8_t reg_val; + int ret = 0; + + mutex_lock(&tps6586x->lock); + + ret = __tps6586x_read(to_i2c_client(dev), reg, ®_val); + if (ret) + goto out; + + if ((reg_val & bit_mask) == 0) { + reg_val |= bit_mask; + ret = __tps6586x_write(to_i2c_client(dev), reg, reg_val); + } +out: + mutex_unlock(&tps6586x->lock); + return ret; +} +EXPORT_SYMBOL_GPL(tps6586x_set_bits); + +int tps6586x_clr_bits(struct device *dev, int reg, uint8_t bit_mask) +{ + struct tps6586x *tps6586x = dev_get_drvdata(dev); + uint8_t reg_val; + int ret = 0; + + mutex_lock(&tps6586x->lock); + + ret = __tps6586x_read(to_i2c_client(dev), reg, ®_val); + if (ret) + goto out; + + if (reg_val & bit_mask) { + reg_val &= ~bit_mask; + ret = __tps6586x_write(to_i2c_client(dev), reg, reg_val); + } +out: + mutex_unlock(&tps6586x->lock); + return ret; +} +EXPORT_SYMBOL_GPL(tps6586x_clr_bits); + +int tps6586x_update(struct device *dev, int reg, uint8_t val, uint8_t mask) +{ + struct tps6586x *tps6586x = dev_get_drvdata(dev); + uint8_t reg_val; + int ret = 0; + + mutex_lock(&tps6586x->lock); + + ret = __tps6586x_read(tps6586x->client, reg, ®_val); + if (ret) + goto out; + + if ((reg_val & mask) != val) { + reg_val = (reg_val & ~mask) | val; + ret = __tps6586x_write(tps6586x->client, reg, reg_val); + } +out: + mutex_unlock(&tps6586x->lock); + return ret; +} +EXPORT_SYMBOL_GPL(tps6586x_update); + +static int tps6586x_gpio_get(struct gpio_chip *gc, unsigned offset) +{ + struct tps6586x *tps6586x = container_of(gc, struct tps6586x, gpio); + uint8_t val; + int ret; + + ret = __tps6586x_read(tps6586x->client, TPS6586X_GPIOSET2, &val); + if (ret) + return ret; + + return !!(val & (1 << offset)); +} + + +static void tps6586x_gpio_set(struct gpio_chip *chip, unsigned offset, + int value) +{ + struct tps6586x *tps6586x = container_of(chip, struct tps6586x, gpio); + + __tps6586x_write(tps6586x->client, TPS6586X_GPIOSET2, + value << offset); +} + +static int tps6586x_gpio_output(struct gpio_chip *gc, unsigned offset, + int value) +{ + struct tps6586x *tps6586x = container_of(gc, struct tps6586x, gpio); + uint8_t val, mask; + + tps6586x_gpio_set(gc, offset, value); + + val = 0x1 << (offset * 2); + mask = 0x3 << (offset * 2); + + return tps6586x_update(tps6586x->dev, TPS6586X_GPIOSET1, val, mask); +} + +static void tps6586x_gpio_init(struct tps6586x *tps6586x, int gpio_base) +{ + int ret; + + if (!gpio_base) + return; + + tps6586x->gpio.owner = THIS_MODULE; + tps6586x->gpio.label = tps6586x->client->name; + tps6586x->gpio.dev = tps6586x->dev; + tps6586x->gpio.base = gpio_base; + tps6586x->gpio.ngpio = 4; + tps6586x->gpio.can_sleep = 1; + + /* FIXME: add handling of GPIOs as dedicated inputs */ + tps6586x->gpio.direction_output = tps6586x_gpio_output; + tps6586x->gpio.set = tps6586x_gpio_set; + tps6586x->gpio.get = tps6586x_gpio_get; + + ret = gpiochip_add(&tps6586x->gpio); + if (ret) + dev_warn(tps6586x->dev, "GPIO registration failed: %d\n", ret); +} + +static int __remove_subdev(struct device *dev, void *unused) +{ + platform_device_unregister(to_platform_device(dev)); + return 0; +} + +static int tps6586x_remove_subdevs(struct tps6586x *tps6586x) +{ + return device_for_each_child(tps6586x->dev, NULL, __remove_subdev); +} + +static int __devinit tps6586x_add_subdevs(struct tps6586x *tps6586x, + struct tps6586x_platform_data *pdata) +{ + struct tps6586x_subdev_info *subdev; + struct platform_device *pdev; + int i, ret = 0; + + for (i = 0; i < pdata->num_subdevs; i++) { + subdev = &pdata->subdevs[i]; + + pdev = platform_device_alloc(subdev->name, subdev->id); + + pdev->dev.parent = tps6586x->dev; + pdev->dev.platform_data = subdev->platform_data; + + ret = platform_device_add(pdev); + if (ret) + goto failed; + } + return 0; + +failed: + tps6586x_remove_subdevs(tps6586x); + return ret; +} + +static int __devinit tps6586x_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct tps6586x_platform_data *pdata = client->dev.platform_data; + struct tps6586x *tps6586x; + int ret; + + if (!pdata) { + dev_err(&client->dev, "tps6586x requires platform data\n"); + return -ENOTSUPP; + } + + ret = i2c_smbus_read_byte_data(client, TPS6586X_VERSIONCRC); + if (ret < 0) { + dev_err(&client->dev, "Chip ID read failed: %d\n", ret); + return -EIO; + } + + if (ret != TPS658621A_VERSIONCRC) { + dev_err(&client->dev, "Unsupported chip ID: %x\n", ret); + return -ENODEV; + } + + tps6586x = kzalloc(sizeof(struct tps6586x), GFP_KERNEL); + if (tps6586x == NULL) + return -ENOMEM; + + tps6586x->client = client; + tps6586x->dev = &client->dev; + i2c_set_clientdata(client, tps6586x); + + mutex_init(&tps6586x->lock); + + ret = tps6586x_add_subdevs(tps6586x, pdata); + if (ret) { + dev_err(&client->dev, "add devices failed: %d\n", ret); + goto err_add_devs; + } + + tps6586x_gpio_init(tps6586x, pdata->gpio_base); + + return 0; + +err_add_devs: + kfree(tps6586x); + return ret; +} + +static int __devexit tps6586x_i2c_remove(struct i2c_client *client) +{ + return 0; +} + +static const struct i2c_device_id tps6586x_id_table[] = { + { "tps6586x", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, tps6586x_id_table); + +static struct i2c_driver tps6586x_driver = { + .driver = { + .name = "tps6586x", + .owner = THIS_MODULE, + }, + .probe = tps6586x_i2c_probe, + .remove = __devexit_p(tps6586x_i2c_remove), + .id_table = tps6586x_id_table, +}; + +static int __init tps6586x_init(void) +{ + return i2c_add_driver(&tps6586x_driver); +} +subsys_initcall(tps6586x_init); + +static void __exit tps6586x_exit(void) +{ + i2c_del_driver(&tps6586x_driver); +} +module_exit(tps6586x_exit); + +MODULE_DESCRIPTION("TPS6586X core driver"); +MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/mfd/twl6030-pwm.c b/drivers/mfd/twl6030-pwm.c new file mode 100644 index 00000000000..5d25bdc7842 --- /dev/null +++ b/drivers/mfd/twl6030-pwm.c @@ -0,0 +1,163 @@ +/* + * twl6030_pwm.c + * Driver for PHOENIX (TWL6030) Pulse Width Modulator + * + * Copyright (C) 2010 Texas Instruments + * Author: Hemanth V <hemanthv@ti.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/i2c/twl.h> +#include <linux/slab.h> + +#define LED_PWM_CTRL1 0xF4 +#define LED_PWM_CTRL2 0xF5 + +/* Max value for CTRL1 register */ +#define PWM_CTRL1_MAX 255 + +/* Pull down disable */ +#define PWM_CTRL2_DIS_PD (1 << 6) + +/* Current control 2.5 milli Amps */ +#define PWM_CTRL2_CURR_02 (2 << 4) + +/* LED supply source */ +#define PWM_CTRL2_SRC_VAC (1 << 2) + +/* LED modes */ +#define PWM_CTRL2_MODE_HW (0 << 0) +#define PWM_CTRL2_MODE_SW (1 << 0) +#define PWM_CTRL2_MODE_DIS (2 << 0) + +#define PWM_CTRL2_MODE_MASK 0x3 + +struct pwm_device { + const char *label; + unsigned int pwm_id; +}; + +int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) +{ + u8 duty_cycle; + int ret; + + if (pwm == NULL || period_ns == 0 || duty_ns > period_ns) + return -EINVAL; + + duty_cycle = (duty_ns * PWM_CTRL1_MAX) / period_ns; + + ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, duty_cycle, LED_PWM_CTRL1); + + if (ret < 0) { + pr_err("%s: Failed to configure PWM, Error %d\n", + pwm->label, ret); + return ret; + } + return 0; +} +EXPORT_SYMBOL(pwm_config); + +int pwm_enable(struct pwm_device *pwm) +{ + u8 val; + int ret; + + ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, LED_PWM_CTRL2); + if (ret < 0) { + pr_err("%s: Failed to enable PWM, Error %d\n", pwm->label, ret); + return ret; + } + + /* Change mode to software control */ + val &= ~PWM_CTRL2_MODE_MASK; + val |= PWM_CTRL2_MODE_SW; + + ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, LED_PWM_CTRL2); + if (ret < 0) { + pr_err("%s: Failed to enable PWM, Error %d\n", pwm->label, ret); + return ret; + } + + twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, LED_PWM_CTRL2); + return 0; +} +EXPORT_SYMBOL(pwm_enable); + +void pwm_disable(struct pwm_device *pwm) +{ + u8 val; + int ret; + + ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, LED_PWM_CTRL2); + if (ret < 0) { + pr_err("%s: Failed to disable PWM, Error %d\n", + pwm->label, ret); + return; + } + + val &= ~PWM_CTRL2_MODE_MASK; + val |= PWM_CTRL2_MODE_HW; + + ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, LED_PWM_CTRL2); + if (ret < 0) { + pr_err("%s: Failed to disable PWM, Error %d\n", + pwm->label, ret); + return; + } + return; +} +EXPORT_SYMBOL(pwm_disable); + +struct pwm_device *pwm_request(int pwm_id, const char *label) +{ + u8 val; + int ret; + struct pwm_device *pwm; + + pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL); + if (pwm == NULL) { + pr_err("%s: failed to allocate memory\n", label); + return NULL; + } + + pwm->label = label; + pwm->pwm_id = pwm_id; + + /* Configure PWM */ + val = PWM_CTRL2_DIS_PD | PWM_CTRL2_CURR_02 | PWM_CTRL2_SRC_VAC | + PWM_CTRL2_MODE_HW; + + ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, LED_PWM_CTRL2); + + if (ret < 0) { + pr_err("%s: Failed to configure PWM, Error %d\n", + pwm->label, ret); + + kfree(pwm); + return NULL; + } + + return pwm; +} +EXPORT_SYMBOL(pwm_request); + +void pwm_free(struct pwm_device *pwm) +{ + pwm_disable(pwm); + kfree(pwm); +} +EXPORT_SYMBOL(pwm_free); diff --git a/drivers/mfd/ucb1400_core.c b/drivers/mfd/ucb1400_core.c index dbe280153f9..d73f84ba0f0 100644 --- a/drivers/mfd/ucb1400_core.c +++ b/drivers/mfd/ucb1400_core.c @@ -114,7 +114,7 @@ static int ucb1400_core_probe(struct device *dev) err3: platform_device_put(ucb->ucb1400_ts); err2: - platform_device_unregister(ucb->ucb1400_gpio); + platform_device_del(ucb->ucb1400_gpio); err1: platform_device_put(ucb->ucb1400_gpio); err0: diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c index 1a968f34d67..1e7aaaf6cc6 100644 --- a/drivers/mfd/wm831x-core.c +++ b/drivers/mfd/wm831x-core.c @@ -95,6 +95,7 @@ enum wm831x_parent { WM8311 = 0x8311, WM8312 = 0x8312, WM8320 = 0x8320, + WM8321 = 0x8321, }; static int wm831x_reg_locked(struct wm831x *wm831x, unsigned short reg) @@ -1533,6 +1534,12 @@ static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) dev_info(wm831x->dev, "WM8320 revision %c\n", 'A' + rev); break; + case WM8321: + parent = WM8321; + wm831x->num_gpio = 12; + dev_info(wm831x->dev, "WM8321 revision %c\n", 'A' + rev); + break; + default: dev_err(wm831x->dev, "Unknown WM831x device %04x\n", ret); ret = -EINVAL; @@ -1607,6 +1614,12 @@ static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) NULL, 0); break; + case WM8321: + ret = mfd_add_devices(wm831x->dev, -1, + wm8320_devs, ARRAY_SIZE(wm8320_devs), + NULL, 0); + break; + default: /* If this happens the bus probe function is buggy */ BUG(); @@ -1744,10 +1757,8 @@ static int wm831x_i2c_probe(struct i2c_client *i2c, struct wm831x *wm831x; wm831x = kzalloc(sizeof(struct wm831x), GFP_KERNEL); - if (wm831x == NULL) { - kfree(i2c); + if (wm831x == NULL) return -ENOMEM; - } i2c_set_clientdata(i2c, wm831x); wm831x->dev = &i2c->dev; @@ -1779,6 +1790,7 @@ static const struct i2c_device_id wm831x_i2c_id[] = { { "wm8311", WM8311 }, { "wm8312", WM8312 }, { "wm8320", WM8320 }, + { "wm8321", WM8321 }, { } }; MODULE_DEVICE_TABLE(i2c, wm831x_i2c_id); diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index b5807484b4c..e81cc31e420 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -536,6 +536,7 @@ static int wm8350_create_cache(struct wm8350 *wm8350, int type, int mode) } out: + kfree(wm8350->reg_cache); return ret; } @@ -700,7 +701,7 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, ret = wm8350_irq_init(wm8350, irq, pdata); if (ret < 0) - goto err; + goto err_free; if (wm8350->irq_base) { ret = request_threaded_irq(wm8350->irq_base + @@ -738,8 +739,9 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, err_irq: wm8350_irq_exit(wm8350); -err: +err_free: kfree(wm8350->reg_cache); +err: return ret; } EXPORT_SYMBOL_GPL(wm8350_device_init); diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c index ec71c936890..b3b2aaf89db 100644 --- a/drivers/mfd/wm8994-core.c +++ b/drivers/mfd/wm8994-core.c @@ -326,8 +326,10 @@ static int wm8994_device_init(struct wm8994 *wm8994, unsigned long id, int irq) wm8994->supplies = kzalloc(sizeof(struct regulator_bulk_data) * ARRAY_SIZE(wm8994_main_supplies), GFP_KERNEL); - if (!wm8994->supplies) + if (!wm8994->supplies) { + ret = -ENOMEM; goto err; + } for (i = 0; i < ARRAY_SIZE(wm8994_main_supplies); i++) wm8994->supplies[i].supply = wm8994_main_supplies[i]; @@ -495,10 +497,8 @@ static int wm8994_i2c_probe(struct i2c_client *i2c, struct wm8994 *wm8994; wm8994 = kzalloc(sizeof(struct wm8994), GFP_KERNEL); - if (wm8994 == NULL) { - kfree(i2c); + if (wm8994 == NULL) return -ENOMEM; - } i2c_set_clientdata(i2c, wm8994); wm8994->dev = &i2c->dev; diff --git a/include/linux/jz4740-adc.h b/include/linux/jz4740-adc.h new file mode 100644 index 00000000000..9053f95e968 --- /dev/null +++ b/include/linux/jz4740-adc.h @@ -0,0 +1,32 @@ + +#ifndef __LINUX_JZ4740_ADC +#define __LINUX_JZ4740_ADC + +#include <linux/device.h> + +/* + * jz4740_adc_set_config - Configure a JZ4740 adc device + * @dev: Pointer to a jz4740-adc device + * @mask: Mask for the config value to be set + * @val: Value to be set + * + * This function can be used by the JZ4740 ADC mfd cells to configure their + * options in the shared config register. +*/ +int jz4740_adc_set_config(struct device *dev, uint32_t mask, uint32_t val); + +#define JZ_ADC_CONFIG_SPZZ BIT(31) +#define JZ_ADC_CONFIG_EX_IN BIT(30) +#define JZ_ADC_CONFIG_DNUM_MASK (0x7 << 16) +#define JZ_ADC_CONFIG_DMA_ENABLE BIT(15) +#define JZ_ADC_CONFIG_XYZ_MASK (0x2 << 13) +#define JZ_ADC_CONFIG_SAMPLE_NUM_MASK (0x7 << 10) +#define JZ_ADC_CONFIG_CLKDIV_MASK (0xf << 5) +#define JZ_ADC_CONFIG_BAT_MB BIT(4) + +#define JZ_ADC_CONFIG_DNUM(dnum) ((dnum) << 16) +#define JZ_ADC_CONFIG_XYZ_OFFSET(dnum) ((xyz) << 13) +#define JZ_ADC_CONFIG_SAMPLE_NUM(x) ((x) << 10) +#define JZ_ADC_CONFIG_CLKDIV(div) ((div) << 5) + +#endif diff --git a/include/linux/mfd/mc13783-private.h b/include/linux/mfd/mc13783-private.h deleted file mode 100644 index 95cf9360553..00000000000 --- a/include/linux/mfd/mc13783-private.h +++ /dev/null @@ -1,220 +0,0 @@ -/* - * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> - * - * Initial development of this code was funded by - * Phytec Messtechnik GmbH, http://www.phytec.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __LINUX_MFD_MC13783_PRIV_H -#define __LINUX_MFD_MC13783_PRIV_H - -#include <linux/platform_device.h> -#include <linux/mfd/mc13783.h> -#include <linux/mutex.h> -#include <linux/interrupt.h> - -struct mc13783 { - struct spi_device *spidev; - struct mutex lock; - int irq; - int flags; - - irq_handler_t irqhandler[MC13783_NUM_IRQ]; - void *irqdata[MC13783_NUM_IRQ]; - - /* XXX these should go as platformdata to the regulator subdevice */ - struct mc13783_regulator_init_data *regulators; - int num_regulators; -}; - -#define MC13783_REG_INTERRUPT_STATUS_0 0 -#define MC13783_REG_INTERRUPT_MASK_0 1 -#define MC13783_REG_INTERRUPT_SENSE_0 2 -#define MC13783_REG_INTERRUPT_STATUS_1 3 -#define MC13783_REG_INTERRUPT_MASK_1 4 -#define MC13783_REG_INTERRUPT_SENSE_1 5 -#define MC13783_REG_POWER_UP_MODE_SENSE 6 -#define MC13783_REG_REVISION 7 -#define MC13783_REG_SEMAPHORE 8 -#define MC13783_REG_ARBITRATION_PERIPHERAL_AUDIO 9 -#define MC13783_REG_ARBITRATION_SWITCHERS 10 -#define MC13783_REG_ARBITRATION_REGULATORS_0 11 -#define MC13783_REG_ARBITRATION_REGULATORS_1 12 -#define MC13783_REG_POWER_CONTROL_0 13 -#define MC13783_REG_POWER_CONTROL_1 14 -#define MC13783_REG_POWER_CONTROL_2 15 -#define MC13783_REG_REGEN_ASSIGNMENT 16 -#define MC13783_REG_CONTROL_SPARE 17 -#define MC13783_REG_MEMORY_A 18 -#define MC13783_REG_MEMORY_B 19 -#define MC13783_REG_RTC_TIME 20 -#define MC13783_REG_RTC_ALARM 21 -#define MC13783_REG_RTC_DAY 22 -#define MC13783_REG_RTC_DAY_ALARM 23 -#define MC13783_REG_SWITCHERS_0 24 -#define MC13783_REG_SWITCHERS_1 25 -#define MC13783_REG_SWITCHERS_2 26 -#define MC13783_REG_SWITCHERS_3 27 -#define MC13783_REG_SWITCHERS_4 28 -#define MC13783_REG_SWITCHERS_5 29 -#define MC13783_REG_REGULATOR_SETTING_0 30 -#define MC13783_REG_REGULATOR_SETTING_1 31 -#define MC13783_REG_REGULATOR_MODE_0 32 -#define MC13783_REG_REGULATOR_MODE_1 33 -#define MC13783_REG_POWER_MISCELLANEOUS 34 -#define MC13783_REG_POWER_SPARE 35 -#define MC13783_REG_AUDIO_RX_0 36 -#define MC13783_REG_AUDIO_RX_1 37 -#define MC13783_REG_AUDIO_TX 38 -#define MC13783_REG_AUDIO_SSI_NETWORK 39 -#define MC13783_REG_AUDIO_CODEC 40 -#define MC13783_REG_AUDIO_STEREO_DAC 41 -#define MC13783_REG_AUDIO_SPARE 42 -#define MC13783_REG_ADC_0 43 -#define MC13783_REG_ADC_1 44 -#define MC13783_REG_ADC_2 45 -#define MC13783_REG_ADC_3 46 -#define MC13783_REG_ADC_4 47 -#define MC13783_REG_CHARGER 48 -#define MC13783_REG_USB 49 -#define MC13783_REG_CHARGE_USB_SPARE 50 -#define MC13783_REG_LED_CONTROL_0 51 -#define MC13783_REG_LED_CONTROL_1 52 -#define MC13783_REG_LED_CONTROL_2 53 -#define MC13783_REG_LED_CONTROL_3 54 -#define MC13783_REG_LED_CONTROL_4 55 -#define MC13783_REG_LED_CONTROL_5 56 -#define MC13783_REG_SPARE 57 -#define MC13783_REG_TRIM_0 58 -#define MC13783_REG_TRIM_1 59 -#define MC13783_REG_TEST_0 60 -#define MC13783_REG_TEST_1 61 -#define MC13783_REG_TEST_2 62 -#define MC13783_REG_TEST_3 63 -#define MC13783_REG_NB 64 - -/* - * Reg Regulator Mode 0 - */ -#define MC13783_REGCTRL_VAUDIO_EN (1 << 0) -#define MC13783_REGCTRL_VAUDIO_STBY (1 << 1) -#define MC13783_REGCTRL_VAUDIO_MODE (1 << 2) -#define MC13783_REGCTRL_VIOHI_EN (1 << 3) -#define MC13783_REGCTRL_VIOHI_STBY (1 << 4) -#define MC13783_REGCTRL_VIOHI_MODE (1 << 5) -#define MC13783_REGCTRL_VIOLO_EN (1 << 6) -#define MC13783_REGCTRL_VIOLO_STBY (1 << 7) -#define MC13783_REGCTRL_VIOLO_MODE (1 << 8) -#define MC13783_REGCTRL_VDIG_EN (1 << 9) -#define MC13783_REGCTRL_VDIG_STBY (1 << 10) -#define MC13783_REGCTRL_VDIG_MODE (1 << 11) -#define MC13783_REGCTRL_VGEN_EN (1 << 12) -#define MC13783_REGCTRL_VGEN_STBY (1 << 13) -#define MC13783_REGCTRL_VGEN_MODE (1 << 14) -#define MC13783_REGCTRL_VRFDIG_EN (1 << 15) -#define MC13783_REGCTRL_VRFDIG_STBY (1 << 16) -#define MC13783_REGCTRL_VRFDIG_MODE (1 << 17) -#define MC13783_REGCTRL_VRFREF_EN (1 << 18) -#define MC13783_REGCTRL_VRFREF_STBY (1 << 19) -#define MC13783_REGCTRL_VRFREF_MODE (1 << 20) -#define MC13783_REGCTRL_VRFCP_EN (1 << 21) -#define MC13783_REGCTRL_VRFCP_STBY (1 << 22) -#define MC13783_REGCTRL_VRFCP_MODE (1 << 23) - -/* - * Reg Regulator Mode 1 - */ -#define MC13783_REGCTRL_VSIM_EN (1 << 0) -#define MC13783_REGCTRL_VSIM_STBY (1 << 1) -#define MC13783_REGCTRL_VSIM_MODE (1 << 2) -#define MC13783_REGCTRL_VESIM_EN (1 << 3) -#define MC13783_REGCTRL_VESIM_STBY (1 << 4) -#define MC13783_REGCTRL_VESIM_MODE (1 << 5) -#define MC13783_REGCTRL_VCAM_EN (1 << 6) -#define MC13783_REGCTRL_VCAM_STBY (1 << 7) -#define MC13783_REGCTRL_VCAM_MODE (1 << 8) -#define MC13783_REGCTRL_VRFBG_EN (1 << 9) -#define MC13783_REGCTRL_VRFBG_STBY (1 << 10) -#define MC13783_REGCTRL_VVIB_EN (1 << 11) -#define MC13783_REGCTRL_VRF1_EN (1 << 12) -#define MC13783_REGCTRL_VRF1_STBY (1 << 13) -#define MC13783_REGCTRL_VRF1_MODE (1 << 14) -#define MC13783_REGCTRL_VRF2_EN (1 << 15) -#define MC13783_REGCTRL_VRF2_STBY (1 << 16) -#define MC13783_REGCTRL_VRF2_MODE (1 << 17) -#define MC13783_REGCTRL_VMMC1_EN (1 << 18) -#define MC13783_REGCTRL_VMMC1_STBY (1 << 19) -#define MC13783_REGCTRL_VMMC1_MODE (1 << 20) -#define MC13783_REGCTRL_VMMC2_EN (1 << 21) -#define MC13783_REGCTRL_VMMC2_STBY (1 << 22) -#define MC13783_REGCTRL_VMMC2_MODE (1 << 23) - -/* - * Reg Regulator Misc. - */ -#define MC13783_REGCTRL_GPO1_EN (1 << 6) -#define MC13783_REGCTRL_GPO2_EN (1 << 8) -#define MC13783_REGCTRL_GPO3_EN (1 << 10) -#define MC13783_REGCTRL_GPO4_EN (1 << 12) -#define MC13783_REGCTRL_VIBPINCTRL (1 << 14) - -/* - * Reg Switcher 4 - */ -#define MC13783_SWCTRL_SW1A_MODE (1 << 0) -#define MC13783_SWCTRL_SW1A_STBY_MODE (1 << 2) -#define MC13783_SWCTRL_SW1A_DVS_SPEED (1 << 6) -#define MC13783_SWCTRL_SW1A_PANIC_MODE (1 << 8) -#define MC13783_SWCTRL_SW1A_SOFTSTART (1 << 9) -#define MC13783_SWCTRL_SW1B_MODE (1 << 10) -#define MC13783_SWCTRL_SW1B_STBY_MODE (1 << 12) -#define MC13783_SWCTRL_SW1B_DVS_SPEED (1 << 14) -#define MC13783_SWCTRL_SW1B_PANIC_MODE (1 << 16) -#define MC13783_SWCTRL_SW1B_SOFTSTART (1 << 17) -#define MC13783_SWCTRL_PLL_EN (1 << 18) -#define MC13783_SWCTRL_PLL_FACTOR (1 << 19) - -/* - * Reg Switcher 5 - */ -#define MC13783_SWCTRL_SW2A_MODE (1 << 0) -#define MC13783_SWCTRL_SW2A_STBY_MODE (1 << 2) -#define MC13783_SWCTRL_SW2A_DVS_SPEED (1 << 6) -#define MC13783_SWCTRL_SW2A_PANIC_MODE (1 << 8) -#define MC13783_SWCTRL_SW2A_SOFTSTART (1 << 9) -#define MC13783_SWCTRL_SW2B_MODE (1 << 10) -#define MC13783_SWCTRL_SW2B_STBY_MODE (1 << 12) -#define MC13783_SWCTRL_SW2B_DVS_SPEED (1 << 14) -#define MC13783_SWCTRL_SW2B_PANIC_MODE (1 << 16) -#define MC13783_SWCTRL_SW2B_SOFTSTART (1 << 17) -#define MC13783_SWSET_SW3 (1 << 18) -#define MC13783_SWCTRL_SW3_EN (1 << 20) -#define MC13783_SWCTRL_SW3_STBY (1 << 21) -#define MC13783_SWCTRL_SW3_MODE (1 << 22) - -static inline int mc13783_set_bits(struct mc13783 *mc13783, unsigned int offset, - u32 mask, u32 val) -{ - int ret; - mc13783_lock(mc13783); - ret = mc13783_reg_rmw(mc13783, offset, mask, val); - mc13783_unlock(mc13783); - - return ret; -} - -#endif /* __LINUX_MFD_MC13783_PRIV_H */ diff --git a/include/linux/mfd/mc13783.h b/include/linux/mfd/mc13783.h index 4a894f68854..0fa44fb8dd2 100644 --- a/include/linux/mfd/mc13783.h +++ b/include/linux/mfd/mc13783.h @@ -21,6 +21,8 @@ int mc13783_reg_write(struct mc13783 *mc13783, unsigned int offset, u32 val); int mc13783_reg_rmw(struct mc13783 *mc13783, unsigned int offset, u32 mask, u32 val); +int mc13783_get_flags(struct mc13783 *mc13783); + int mc13783_irq_request(struct mc13783 *mc13783, int irq, irq_handler_t handler, const char *name, void *dev); int mc13783_irq_request_nounmask(struct mc13783 *mc13783, int irq, diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h new file mode 100644 index 00000000000..39ca7588659 --- /dev/null +++ b/include/linux/mfd/stmpe.h @@ -0,0 +1,201 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License, version 2 + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + */ + +#ifndef __LINUX_MFD_STMPE_H +#define __LINUX_MFD_STMPE_H + +#include <linux/device.h> + +enum stmpe_block { + STMPE_BLOCK_GPIO = 1 << 0, + STMPE_BLOCK_KEYPAD = 1 << 1, + STMPE_BLOCK_TOUCHSCREEN = 1 << 2, + STMPE_BLOCK_ADC = 1 << 3, + STMPE_BLOCK_PWM = 1 << 4, + STMPE_BLOCK_ROTATOR = 1 << 5, +}; + +enum stmpe_partnum { + STMPE811, + STMPE1601, + STMPE2401, + STMPE2403, +}; + +/* + * For registers whose locations differ on variants, the correct address is + * obtained by indexing stmpe->regs with one of the following. + */ +enum { + STMPE_IDX_CHIP_ID, + STMPE_IDX_ICR_LSB, + STMPE_IDX_IER_LSB, + STMPE_IDX_ISR_MSB, + STMPE_IDX_GPMR_LSB, + STMPE_IDX_GPSR_LSB, + STMPE_IDX_GPCR_LSB, + STMPE_IDX_GPDR_LSB, + STMPE_IDX_GPEDR_MSB, + STMPE_IDX_GPRER_LSB, + STMPE_IDX_GPFER_LSB, + STMPE_IDX_GPAFR_U_MSB, + STMPE_IDX_IEGPIOR_LSB, + STMPE_IDX_ISGPIOR_MSB, + STMPE_IDX_MAX, +}; + + +struct stmpe_variant_info; + +/** + * struct stmpe - STMPE MFD structure + * @lock: lock protecting I/O operations + * @irq_lock: IRQ bus lock + * @dev: device, mostly for dev_dbg() + * @i2c: i2c client + * @variant: the detected STMPE model number + * @regs: list of addresses of registers which are at different addresses on + * different variants. Indexed by one of STMPE_IDX_*. + * @irq_base: starting IRQ number for internal IRQs + * @num_gpios: number of gpios, differs for variants + * @ier: cache of IER registers for bus_lock + * @oldier: cache of IER registers for bus_lock + * @pdata: platform data + */ +struct stmpe { + struct mutex lock; + struct mutex irq_lock; + struct device *dev; + struct i2c_client *i2c; + enum stmpe_partnum partnum; + struct stmpe_variant_info *variant; + const u8 *regs; + + int irq_base; + int num_gpios; + u8 ier[2]; + u8 oldier[2]; + struct stmpe_platform_data *pdata; +}; + +extern int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 data); +extern int stmpe_reg_read(struct stmpe *stmpe, u8 reg); +extern int stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length, + u8 *values); +extern int stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length, + const u8 *values); +extern int stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val); +extern int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins, + enum stmpe_block block); +extern int stmpe_enable(struct stmpe *stmpe, unsigned int blocks); +extern int stmpe_disable(struct stmpe *stmpe, unsigned int blocks); + +struct matrix_keymap_data; + +/** + * struct stmpe_keypad_platform_data - STMPE keypad platform data + * @keymap_data: key map table and size + * @debounce_ms: debounce interval, in ms. Maximum is + * %STMPE_KEYPAD_MAX_DEBOUNCE. + * @scan_count: number of key scanning cycles to confirm key data. + * Maximum is %STMPE_KEYPAD_MAX_SCAN_COUNT. + * @no_autorepeat: disable key autorepeat + */ +struct stmpe_keypad_platform_data { + struct matrix_keymap_data *keymap_data; + unsigned int debounce_ms; + unsigned int scan_count; + bool no_autorepeat; +}; + +/** + * struct stmpe_gpio_platform_data - STMPE GPIO platform data + * @gpio_base: first gpio number assigned. A maximum of + * %STMPE_NR_GPIOS GPIOs will be allocated. + */ +struct stmpe_gpio_platform_data { + int gpio_base; + void (*setup)(struct stmpe *stmpe, unsigned gpio_base); + void (*remove)(struct stmpe *stmpe, unsigned gpio_base); +}; + +/** + * struct stmpe_ts_platform_data - stmpe811 touch screen controller platform + * data + * @sample_time: ADC converstion time in number of clock. + * (0 -> 36 clocks, 1 -> 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, + * 4 -> 80 clocks, 5 -> 96 clocks, 6 -> 144 clocks), + * recommended is 4. + * @mod_12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC) + * @ref_sel: ADC reference source + * (0 -> internal reference, 1 -> external reference) + * @adc_freq: ADC Clock speed + * (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz) + * @ave_ctrl: Sample average control + * (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 samples, 3 -> 8 samples) + * @touch_det_delay: Touch detect interrupt delay + * (0 -> 10 us, 1 -> 50 us, 2 -> 100 us, 3 -> 500 us, + * 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms) + * recommended is 3 + * @settling: Panel driver settling time + * (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3 -> 1 ms, + * 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms) + * recommended is 2 + * @fraction_z: Length of the fractional part in z + * (fraction_z ([0..7]) = Count of the fractional part) + * recommended is 7 + * @i_drive: current limit value of the touchscreen drivers + * (0 -> 20 mA typical 35 mA max, 1 -> 50 mA typical 80 mA max) + * + * */ +struct stmpe_ts_platform_data { + u8 sample_time; + u8 mod_12b; + u8 ref_sel; + u8 adc_freq; + u8 ave_ctrl; + u8 touch_det_delay; + u8 settling; + u8 fraction_z; + u8 i_drive; +}; + +/** + * struct stmpe_platform_data - STMPE platform data + * @id: device id to distinguish between multiple STMPEs on the same board + * @blocks: bitmask of blocks to enable (use STMPE_BLOCK_*) + * @irq_trigger: IRQ trigger to use for the interrupt to the host + * @irq_invert_polarity: IRQ line is connected with reversed polarity + * @autosleep: bool to enable/disable stmpe autosleep + * @autosleep_timeout: inactivity timeout in milliseconds for autosleep + * @irq_base: base IRQ number. %STMPE_NR_IRQS irqs will be used, or + * %STMPE_NR_INTERNAL_IRQS if the GPIO driver is not used. + * @gpio: GPIO-specific platform data + * @keypad: keypad-specific platform data + * @ts: touchscreen-specific platform data + */ +struct stmpe_platform_data { + int id; + unsigned int blocks; + int irq_base; + unsigned int irq_trigger; + bool irq_invert_polarity; + bool autosleep; + int autosleep_timeout; + + struct stmpe_gpio_platform_data *gpio; + struct stmpe_keypad_platform_data *keypad; + struct stmpe_ts_platform_data *ts; +}; + +#define STMPE_NR_INTERNAL_IRQS 9 +#define STMPE_INT_GPIO(x) (STMPE_NR_INTERNAL_IRQS + (x)) + +#define STMPE_NR_GPIOS 24 +#define STMPE_NR_IRQS STMPE_INT_GPIO(STMPE_NR_GPIOS) + +#endif diff --git a/include/linux/mfd/tps6586x.h b/include/linux/mfd/tps6586x.h new file mode 100644 index 00000000000..772b3ae640a --- /dev/null +++ b/include/linux/mfd/tps6586x.h @@ -0,0 +1,47 @@ +#ifndef __LINUX_MFD_TPS6586X_H +#define __LINUX_MFD_TPS6586X_H + +enum { + TPS6586X_ID_SM_0, + TPS6586X_ID_SM_1, + TPS6586X_ID_SM_2, + TPS6586X_ID_LDO_0, + TPS6586X_ID_LDO_1, + TPS6586X_ID_LDO_2, + TPS6586X_ID_LDO_3, + TPS6586X_ID_LDO_4, + TPS6586X_ID_LDO_5, + TPS6586X_ID_LDO_6, + TPS6586X_ID_LDO_7, + TPS6586X_ID_LDO_8, + TPS6586X_ID_LDO_9, + TPS6586X_ID_LDO_RTC, +}; + +struct tps6586x_subdev_info { + int id; + const char *name; + void *platform_data; +}; + +struct tps6586x_platform_data { + int num_subdevs; + struct tps6586x_subdev_info *subdevs; + + int gpio_base; +}; + +/* + * NOTE: the functions below are not intended for use outside + * of the TPS6586X sub-device drivers + */ +extern int tps6586x_write(struct device *dev, int reg, uint8_t val); +extern int tps6586x_writes(struct device *dev, int reg, int len, uint8_t *val); +extern int tps6586x_read(struct device *dev, int reg, uint8_t *val); +extern int tps6586x_reads(struct device *dev, int reg, int len, uint8_t *val); +extern int tps6586x_set_bits(struct device *dev, int reg, uint8_t bit_mask); +extern int tps6586x_clr_bits(struct device *dev, int reg, uint8_t bit_mask); +extern int tps6586x_update(struct device *dev, int reg, uint8_t val, + uint8_t mask); + +#endif /*__LINUX_MFD_TPS6586X_H */ diff --git a/include/linux/mfd/wm8994/gpio.h b/include/linux/mfd/wm8994/gpio.h index b4d4c22991e..0c79b5ff4b5 100644 --- a/include/linux/mfd/wm8994/gpio.h +++ b/include/linux/mfd/wm8994/gpio.h @@ -36,6 +36,10 @@ #define WM8994_GP_FN_WSEQ_STATUS 16 #define WM8994_GP_FN_FIFO_ERROR 17 #define WM8994_GP_FN_OPCLK 18 +#define WM8994_GP_FN_THW 19 +#define WM8994_GP_FN_DCS_DONE 20 +#define WM8994_GP_FN_FLL1_OUT 21 +#define WM8994_GP_FN_FLL2_OUT 22 #define WM8994_GPN_DIR 0x8000 /* GPN_DIR */ #define WM8994_GPN_DIR_MASK 0x8000 /* GPN_DIR */ |