diff options
37 files changed, 1115 insertions, 1473 deletions
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 9ceccef9c64..f81e7b989ff 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -34,6 +34,7 @@ config BLACKFIN select ARCH_WANT_IPC_PARSE_VERSION select GENERIC_ATOMIC64 select GENERIC_IRQ_PROBE + select GENERIC_IRQ_SHOW select HAVE_NMI_WATCHDOG if NMI_WATCHDOG select GENERIC_SMP_IDLE_THREAD select ARCH_USES_GETTIMEOFFSET if !GENERIC_CLOCKEVENTS @@ -51,9 +52,6 @@ config GENERIC_BUG config ZONE_DMA def_bool y -config GENERIC_GPIO - def_bool y - config FORCE_MAX_ZONEORDER int default "14" @@ -870,14 +868,6 @@ config SYS_BFIN_SPINLOCK_L1 If enabled, sys_bfin_spinlock function is linked into L1 instruction memory. (less latency) -config IP_CHECKSUM_L1 - bool "Locate IP Checksum function in L1 Memory" - default n - depends on !SMP - help - If enabled, the IP Checksum function is linked - into L1 instruction memory. (less latency) - config CACHELINE_ALIGNED_L1 bool "Locate cacheline_aligned data to L1 Data Memory" default y if !BF54x diff --git a/arch/blackfin/include/asm/bfin_crc.h b/arch/blackfin/include/asm/bfin_crc.h deleted file mode 100644 index 75cef4dc85a..00000000000 --- a/arch/blackfin/include/asm/bfin_crc.h +++ /dev/null @@ -1,125 +0,0 @@ -/* - * bfin_crc.h - interface to Blackfin CRC controllers - * - * Copyright 2012 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#ifndef __BFIN_CRC_H__ -#define __BFIN_CRC_H__ - -/* Function driver which use hardware crc must initialize the structure */ -struct crc_info { - /* Input data address */ - unsigned char *in_addr; - /* Output data address */ - unsigned char *out_addr; - /* Input or output bytes */ - unsigned long datasize; - union { - /* CRC to compare with that of input buffer */ - unsigned long crc_compare; - /* Value to compare with input data */ - unsigned long val_verify; - /* Value to fill */ - unsigned long val_fill; - }; - /* Value to program the 32b CRC Polynomial */ - unsigned long crc_poly; - union { - /* CRC calculated from the input data */ - unsigned long crc_result; - /* First failed position to verify input data */ - unsigned long pos_verify; - }; - /* CRC mirror flags */ - unsigned int bitmirr:1; - unsigned int bytmirr:1; - unsigned int w16swp:1; - unsigned int fdsel:1; - unsigned int rsltmirr:1; - unsigned int polymirr:1; - unsigned int cmpmirr:1; -}; - -/* Userspace interface */ -#define CRC_IOC_MAGIC 'C' -#define CRC_IOC_CALC_CRC _IOWR('C', 0x01, unsigned int) -#define CRC_IOC_MEMCPY_CRC _IOWR('C', 0x02, unsigned int) -#define CRC_IOC_VERIFY_VAL _IOWR('C', 0x03, unsigned int) -#define CRC_IOC_FILL_VAL _IOWR('C', 0x04, unsigned int) - - -#ifdef __KERNEL__ - -#include <linux/types.h> -#include <linux/spinlock.h> -#include <linux/miscdevice.h> - -struct crc_register { - u32 control; - u32 datacnt; - u32 datacntrld; - u32 __pad_1[2]; - u32 compare; - u32 fillval; - u32 datafifo; - u32 intren; - u32 intrenset; - u32 intrenclr; - u32 poly; - u32 __pad_2[4]; - u32 status; - u32 datacntcap; - u32 __pad_3; - u32 result; - u32 curresult; - u32 __pad_4[3]; - u32 revid; -}; - -/* CRC_STATUS Masks */ -#define CMPERR 0x00000002 /* Compare error */ -#define DCNTEXP 0x00000010 /* datacnt register expired */ -#define IBR 0x00010000 /* Input buffer ready */ -#define OBR 0x00020000 /* Output buffer ready */ -#define IRR 0x00040000 /* Immediate result readt */ -#define LUTDONE 0x00080000 /* Look-up table generation done */ -#define FSTAT 0x00700000 /* FIFO status */ -#define MAX_FIFO 4 /* Max fifo size */ - -/* CRC_CONTROL Masks */ -#define BLKEN 0x00000001 /* Block enable */ -#define OPMODE 0x000000F0 /* Operation mode */ -#define OPMODE_OFFSET 4 /* Operation mode mask offset*/ -#define MODE_DMACPY_CRC 1 /* MTM CRC compute and compare */ -#define MODE_DATA_FILL 2 /* MTM data fill */ -#define MODE_CALC_CRC 3 /* MSM CRC compute and compare */ -#define MODE_DATA_VERIFY 4 /* MSM data verify */ -#define AUTOCLRZ 0x00000100 /* Auto clear to zero */ -#define AUTOCLRF 0x00000200 /* Auto clear to one */ -#define OBRSTALL 0x00001000 /* Stall on output buffer ready */ -#define IRRSTALL 0x00002000 /* Stall on immediate result ready */ -#define BITMIRR 0x00010000 /* Mirror bits within each byte of 32-bit input data */ -#define BITMIRR_OFFSET 16 /* Mirror bits offset */ -#define BYTMIRR 0x00020000 /* Mirror bytes of 32-bit input data */ -#define BYTMIRR_OFFSET 17 /* Mirror bytes offset */ -#define W16SWP 0x00040000 /* Mirror uppper and lower 16-bit word of 32-bit input data */ -#define W16SWP_OFFSET 18 /* Mirror 16-bit word offset */ -#define FDSEL 0x00080000 /* FIFO is written after input data is mirrored */ -#define FDSEL_OFFSET 19 /* Mirror FIFO offset */ -#define RSLTMIRR 0x00100000 /* CRC result registers are mirrored. */ -#define RSLTMIRR_OFFSET 20 /* Mirror CRC result offset. */ -#define POLYMIRR 0x00200000 /* CRC poly register is mirrored. */ -#define POLYMIRR_OFFSET 21 /* Mirror CRC poly offset. */ -#define CMPMIRR 0x00400000 /* CRC compare register is mirrored. */ -#define CMPMIRR_OFFSET 22 /* Mirror CRC compare offset. */ - -/* CRC_INTREN Masks */ -#define CMPERRI 0x02 /* CRC_ERROR_INTR */ -#define DCNTEXPI 0x10 /* CRC_STATUS_INTR */ - -#endif - -#endif diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h index 40e9c2bbc6e..8d1e4c2d2c3 100644 --- a/arch/blackfin/include/asm/dma.h +++ b/arch/blackfin/include/asm/dma.h @@ -316,8 +316,6 @@ static inline void disable_dma(unsigned int channel) } static inline void enable_dma(unsigned int channel) { - dma_ch[channel].regs->curr_x_count = 0; - dma_ch[channel].regs->curr_y_count = 0; dma_ch[channel].regs->cfg |= DMAEN; } int set_dma_callback(unsigned int channel, irq_handler_t callback, void *data); diff --git a/arch/blackfin/include/asm/portmux.h b/arch/blackfin/include/asm/portmux.h index 7aa20436e79..c8f0939419b 100644 --- a/arch/blackfin/include/asm/portmux.h +++ b/arch/blackfin/include/asm/portmux.h @@ -18,16 +18,14 @@ #define P_DONTCARE 0x1000 #ifdef CONFIG_PINCTRL -#include <asm/irq_handler.h> +int bfin_internal_set_wake(unsigned int irq, unsigned int state); #define gpio_pint_regs bfin_pint_regs #define adi_internal_set_wake bfin_internal_set_wake -#define peripheral_request(per, label) 0 +#define peripheral_request(per, label) (0) #define peripheral_free(per) -#define peripheral_request_list(per, label) \ - (pdev ? (IS_ERR(devm_pinctrl_get_select_default(&pdev->dev)) \ - ? -EINVAL : 0) : 0) +#define peripheral_request_list(per, label) (0) #define peripheral_free_list(per) #else int peripheral_request(unsigned short per, const char *label); @@ -39,7 +37,7 @@ void peripheral_free_list(const unsigned short per[]); #include <linux/err.h> #include <linux/pinctrl/pinctrl.h> #include <mach/portmux.h> -#include <linux/gpio.h> +#include <mach/gpio.h> #ifndef P_SPORT2_TFS #define P_SPORT2_TFS P_UNDEF diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c index ff3d747154a..0ba25764b8c 100644 --- a/arch/blackfin/kernel/irqchip.c +++ b/arch/blackfin/kernel/irqchip.c @@ -11,6 +11,7 @@ #include <linux/kallsyms.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/seq_file.h> #include <asm/irq_handler.h> #include <asm/trace.h> #include <asm/pda.h> @@ -33,37 +34,15 @@ static struct irq_desc bad_irq_desc = { #endif #ifdef CONFIG_PROC_FS -int show_interrupts(struct seq_file *p, void *v) +int arch_show_interrupts(struct seq_file *p, int prec) { - int i = *(loff_t *) v, j; - struct irqaction *action; - unsigned long flags; - - if (i < NR_IRQS) { - struct irq_desc *desc = irq_to_desc(i); - - raw_spin_lock_irqsave(&desc->lock, flags); - action = desc->action; - if (!action) - goto skip; - seq_printf(p, "%3d: ", i); - for_each_online_cpu(j) - seq_printf(p, "%10u ", kstat_irqs_cpu(i, j)); - seq_printf(p, " %8s", irq_desc_get_chip(desc)->name); - seq_printf(p, " %s", action->name); - for (action = action->next; action; action = action->next) - seq_printf(p, " %s", action->name); - - seq_putc(p, '\n'); - skip: - raw_spin_unlock_irqrestore(&desc->lock, flags); - } else if (i == NR_IRQS) { - seq_printf(p, "NMI: "); - for_each_online_cpu(j) - seq_printf(p, "%10u ", cpu_pda[j].__nmi_count); - seq_printf(p, " CORE Non Maskable Interrupt\n"); - seq_printf(p, "Err: %10u\n", atomic_read(&irq_err_count)); - } + int j; + + seq_printf(p, "%*s: ", prec, "NMI"); + for_each_online_cpu(j) + seq_printf(p, "%10u ", cpu_pda[j].__nmi_count); + seq_printf(p, " CORE Non Maskable Interrupt\n"); + seq_printf(p, "%*s: %10u\n", prec, "ERR", atomic_read(&irq_err_count)); return 0; } #endif diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c index f8047ca3b33..d022112927c 100644 --- a/arch/blackfin/mach-bf518/boards/ezbrd.c +++ b/arch/blackfin/mach-bf518/boards/ezbrd.c @@ -36,7 +36,7 @@ const char bfin_board_name[] = "ADI BF518F-EZBRD"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition ezbrd_partitions[] = { { .name = "bootloader(nor)", @@ -61,7 +61,7 @@ static struct physmap_flash_data ezbrd_flash_data = { static struct resource ezbrd_flash_resource = { .start = 0x20000000, -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) .end = 0x202fffff, #else .end = 0x203fffff, @@ -80,14 +80,14 @@ static struct platform_device ezbrd_flash_device = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = { P_MII0_ETxD0, @@ -105,7 +105,7 @@ static const unsigned short bfin_mac_peripherals[] = { static struct bfin_phydev_platform_data bfin_phydev_data[] = { { -#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) +#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M) .addr = 3, #else .addr = 1, @@ -119,7 +119,7 @@ static struct bfin_mii_bus_platform_data bfin_mii_bus_data = { .phydev_data = bfin_phydev_data, .phy_mode = PHY_INTERFACE_MODE_MII, .mac_peripherals = bfin_mac_peripherals, -#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) +#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M) .phy_mask = 0xfff7, /* Only probe the port phy connect to the on chip MAC */ #endif .vlan1_mask = 1, @@ -140,7 +140,7 @@ static struct platform_device bfin_mac_device = { } }; -#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) +#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M) static struct dsa_chip_data ksz8893m_switch_chip_data = { .mii_bus = &bfin_mii_bus.dev, .port_names = { @@ -165,8 +165,7 @@ static struct platform_device ksz8893m_switch_device = { #endif #endif -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -193,13 +192,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -216,8 +215,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -230,9 +228,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) -#if defined(CONFIG_NET_DSA_KSZ8893M) \ - || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) +#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M) { .modalias = "ksz8893m", .max_speed_hz = 5000000, @@ -244,7 +241,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ @@ -254,7 +251,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, @@ -264,7 +261,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 2, }, #endif -#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ +#if IS_ENABLED(CONFIG_SND_SOC_WM8731) \ && defined(CONFIG_SND_SOC_WM8731_SPI) { .modalias = "wm8731", @@ -274,7 +271,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_0, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -282,7 +279,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 1, }, #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) { .modalias = "bfin-lq035q1-spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -294,7 +291,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }; /* SPI controller data */ -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI (0) */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 6, @@ -366,7 +363,7 @@ static struct platform_device bfin_spi1_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -465,7 +462,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -520,7 +517,7 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) static struct platform_device bfin_i2s = { .name = "bfin-i2s", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -528,7 +525,7 @@ static struct platform_device bfin_i2s = { }; #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -556,25 +553,25 @@ static struct platform_device i2c_bfin_twi_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, #endif -#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE) +#if IS_ENABLED(CONFIG_INPUT_PCF8574) { I2C_BOARD_INFO("pcf8574_keypad", 0x27), .irq = IRQ_PF8, }, #endif -#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_SSM2602) { I2C_BOARD_INFO("ssm2602", 0x1b), }, #endif }; -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -645,7 +642,7 @@ static struct platform_device bfin_sport1_uart_device = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -667,7 +664,7 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SDH_BFIN) static struct bfin_sd_host bfin_sdh_data = { .dma_chan = CH_RSI, @@ -710,24 +707,24 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, -#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) +#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M) &ksz8893m_switch_device, #endif #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, &bfin_spi1_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -736,7 +733,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -745,15 +742,15 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -762,15 +759,15 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SDH_BFIN) &bf51x_sdh_device, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &ezbrd_flash_device, #endif }; @@ -784,7 +781,7 @@ static int __init ezbrd_init(void) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); /* setup BF518-EZBRD GPIO pin PG11 to AMS2, PG15 to AMS3. */ peripheral_request(P_AMS2, "ParaFlash"); -#if !defined(CONFIG_SPI_BFIN5XX) && !defined(CONFIG_SPI_BFIN5XX_MODULE) +#if !IS_ENABLED(CONFIG_SPI_BFIN5XX) peripheral_request(P_AMS3, "ParaFlash"); #endif return 0; diff --git a/arch/blackfin/mach-bf518/boards/tcm-bf518.c b/arch/blackfin/mach-bf518/boards/tcm-bf518.c index 0bedc737566..240d5cb1f02 100644 --- a/arch/blackfin/mach-bf518/boards/tcm-bf518.c +++ b/arch/blackfin/mach-bf518/boards/tcm-bf518.c @@ -36,7 +36,7 @@ const char bfin_board_name[] = "Bluetechnix TCM-BF518"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition tcm_partitions[] = { { .name = "bootloader(nor)", @@ -73,14 +73,14 @@ static struct platform_device tcm_flash_device = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_MII0; @@ -113,8 +113,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -141,13 +140,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -164,8 +163,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -178,7 +176,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -188,7 +186,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, @@ -198,7 +196,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 2, }, #endif -#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ +#if IS_ENABLED(CONFIG_SND_SOC_WM8731) \ && defined(CONFIG_SND_SOC_WM8731_SPI) { .modalias = "wm8731", @@ -208,7 +206,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_0, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -216,7 +214,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 1, }, #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) { .modalias = "bfin-lq035q1-spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -228,7 +226,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }; /* SPI controller data */ -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI (0) */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 6, @@ -300,7 +298,7 @@ static struct platform_device bfin_spi1_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -399,7 +397,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -454,7 +452,7 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -482,12 +480,12 @@ static struct platform_device i2c_bfin_twi_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, #endif -#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE) +#if IS_ENABLED(CONFIG_INPUT_PCF8574) { I2C_BOARD_INFO("pcf8574_keypad", 0x27), .irq = IRQ_PF8, @@ -495,7 +493,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #endif }; -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -566,7 +564,7 @@ static struct platform_device bfin_sport1_uart_device = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -588,7 +586,7 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SDH_BFIN) static struct bfin_sd_host bfin_sdh_data = { .dma_chan = CH_RSI, @@ -631,21 +629,21 @@ static struct platform_device *tcm_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, &bfin_spi1_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -654,7 +652,7 @@ static struct platform_device *tcm_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -663,11 +661,11 @@ static struct platform_device *tcm_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -676,15 +674,15 @@ static struct platform_device *tcm_devices[] __initdata = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SDH_BFIN) &bf51x_sdh_device, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &tcm_flash_device, #endif }; diff --git a/arch/blackfin/mach-bf527/boards/ad7160eval.c b/arch/blackfin/mach-bf527/boards/ad7160eval.c index 1e7be62fccb..9501bd8d9cd 100644 --- a/arch/blackfin/mach-bf527/boards/ad7160eval.c +++ b/arch/blackfin/mach-bf527/boards/ad7160eval.c @@ -37,7 +37,7 @@ const char bfin_board_name[] = "ADI BF527-AD7160EVAL"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) static struct resource musb_resources[] = { [0] = { .start = 0xffc03800, @@ -97,7 +97,7 @@ static struct platform_device musb_device = { }; #endif -#if defined(CONFIG_FB_BFIN_RA158Z) || defined(CONFIG_FB_BFIN_RA158Z_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_RA158Z) static struct resource bf52x_ra158z_resources[] = { { .start = IRQ_PPI_ERROR, @@ -114,7 +114,7 @@ static struct platform_device bf52x_ra158z_device = { }; #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition ad7160eval_partitions[] = { { .name = "bootloader(nor)", @@ -154,7 +154,7 @@ static struct platform_device ad7160eval_flash_device = { }; #endif -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) static struct mtd_partition partition_info[] = { { .name = "linux kernel(nand)", @@ -200,14 +200,14 @@ static struct platform_device bf5xx_nand_device = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_RMII0; @@ -241,8 +241,7 @@ static struct platform_device bfin_mac_device = { #endif -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -269,13 +268,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) static struct platform_device bfin_i2s = { .name = "bfin-i2s", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -284,8 +283,7 @@ static struct platform_device bfin_i2s = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -297,8 +295,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ - || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -306,7 +303,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 4, }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 30000000, /* max spi clock (SCK) speed in HZ */ @@ -316,7 +313,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -326,7 +323,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, @@ -364,7 +361,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -475,7 +472,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -530,7 +527,7 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_TOUCHSCREEN_AD7160) || defined(CONFIG_TOUCHSCREEN_AD7160_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7160) #include <linux/input/ad7160.h> static const struct ad7160_platform_data bfin_ad7160_ts_info = { .sensor_x_res = 854, @@ -560,7 +557,7 @@ static const struct ad7160_platform_data bfin_ad7160_ts_info = { }; #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -588,7 +585,7 @@ static struct platform_device i2c_bfin_twi_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_TOUCHSCREEN_AD7160) || defined(CONFIG_TOUCHSCREEN_AD7160_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7160) { I2C_BOARD_INFO("ad7160", 0x33), .irq = IRQ_PH1, @@ -597,7 +594,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #endif }; -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -668,7 +665,7 @@ static struct platform_device bfin_sport1_uart_device = { #endif #endif -#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) +#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY) #include <asm/bfin_rotary.h> static struct bfin_rotary_platform_data bfin_rotary_data = { @@ -725,28 +722,28 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) &bf5xx_nand_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) &musb_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -755,11 +752,11 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_FB_BFIN_RA158Z) || defined(CONFIG_FB_BFIN_RA158Z_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_RA158Z) &bf52x_ra158z_device, #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -768,11 +765,11 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -781,15 +778,15 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) +#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY) &bfin_rotary_device, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &ad7160eval_flash_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s, #endif }; diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index 413d0132b66..b1004b35db3 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -37,7 +37,7 @@ const char bfin_board_name[] = "Bluetechnix CM-BF527"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) #include <linux/usb/isp1760.h> static struct resource bfin_isp1760_resources[] = { [0] = { @@ -72,7 +72,7 @@ static struct platform_device bfin_isp1760_device = { }; #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) static struct resource musb_resources[] = { [0] = { .start = 0xffc03800, @@ -134,7 +134,7 @@ static struct platform_device musb_device = { }; #endif -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) static struct mtd_partition partition_info[] = { { .name = "linux kernel(nand)", @@ -180,7 +180,7 @@ static struct platform_device bf5xx_nand_device = { }; #endif -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) static struct resource bfin_pcmcia_cf_resources[] = { { .start = 0x20310000, /* IO PORT */ @@ -209,14 +209,14 @@ static struct platform_device bfin_pcmcia_cf_device = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -249,7 +249,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +#if IS_ENABLED(CONFIG_DM9000) static struct resource dm9000_resources[] = { [0] = { .start = 0x203FB800, @@ -276,7 +276,7 @@ static struct platform_device dm9000_device = { }; #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_RMII0; @@ -309,7 +309,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x20300000, @@ -330,8 +330,7 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -358,13 +357,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -381,8 +380,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -395,8 +393,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ - || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -404,7 +401,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 4, }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -414,7 +411,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, @@ -424,7 +421,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 2, }, #endif -#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ +#if IS_ENABLED(CONFIG_SND_SOC_WM8731) \ && defined(CONFIG_SND_SOC_WM8731_SPI) { .modalias = "wm8731", @@ -434,7 +431,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_0, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -444,7 +441,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, @@ -482,7 +479,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR) static struct mtd_partition cm_partitions[] = { { .name = "bootloader(nor)", @@ -531,7 +528,7 @@ static struct platform_device cm_flash_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -642,7 +639,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -697,7 +694,7 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -725,25 +722,25 @@ static struct platform_device i2c_bfin_twi_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, #endif -#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE) +#if IS_ENABLED(CONFIG_INPUT_PCF8574) { I2C_BOARD_INFO("pcf8574_keypad", 0x27), .irq = IRQ_PF8, }, #endif -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_7393) { I2C_BOARD_INFO("bfin-adv7393", 0x2B), }, #endif }; -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -814,7 +811,7 @@ static struct platform_device bfin_sport1_uart_device = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -861,48 +858,48 @@ static struct platform_device *cmbf527_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) &bf5xx_nand_device, #endif -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) &bfin_pcmcia_cf_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) &bfin_isp1760_device, #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) &musb_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +#if IS_ENABLED(CONFIG_DM9000) &dm9000_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -911,7 +908,7 @@ static struct platform_device *cmbf527_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -920,11 +917,11 @@ static struct platform_device *cmbf527_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -933,11 +930,11 @@ static struct platform_device *cmbf527_devices[] __initdata = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR) &cm_flash_device, #endif }; diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c index 50bda79194e..a3a57235276 100644 --- a/arch/blackfin/mach-bf527/boards/ezbrd.c +++ b/arch/blackfin/mach-bf527/boards/ezbrd.c @@ -36,7 +36,7 @@ const char bfin_board_name[] = "ADI BF526-EZBRD"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) static struct resource musb_resources[] = { [0] = { .start = 0xffc03800, @@ -98,7 +98,7 @@ static struct platform_device musb_device = { }; #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition ezbrd_partitions[] = { { .name = "bootloader(nor)", @@ -138,7 +138,7 @@ static struct platform_device ezbrd_flash_device = { }; #endif -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) static struct mtd_partition partition_info[] = { { .name = "bootloader(nand)", @@ -188,7 +188,7 @@ static struct platform_device bf5xx_nand_device = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, @@ -196,7 +196,7 @@ static struct platform_device rtc_device = { #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_RMII0; @@ -229,8 +229,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -257,13 +256,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -279,7 +278,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879) #include <linux/spi/ad7879.h> static const struct ad7879_platform_data bfin_ad7879_ts_info = { .model = 7879, /* Model = AD7879 */ @@ -297,8 +296,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -311,7 +309,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ @@ -321,7 +319,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, @@ -331,7 +329,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 2, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI) { .modalias = "ad7879", .platform_data = &bfin_ad7879_ts_info, @@ -342,7 +340,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_CPHA | SPI_CPOL, }, #endif -#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ +#if IS_ENABLED(CONFIG_SND_SOC_WM8731) \ && defined(CONFIG_SND_SOC_WM8731_SPI) { .modalias = "wm8731", @@ -352,7 +350,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_0, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -360,7 +358,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 1, }, #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) { .modalias = "bfin-lq035q1-spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -371,7 +369,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, @@ -409,7 +407,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -520,7 +518,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -575,7 +573,7 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -603,12 +601,12 @@ static struct platform_device i2c_bfin_twi_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, #endif -#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE) +#if IS_ENABLED(CONFIG_INPUT_PCF8574) { I2C_BOARD_INFO("pcf8574_keypad", 0x27), .irq = IRQ_PF8, @@ -616,7 +614,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #endif }; -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -687,7 +685,7 @@ static struct platform_device bfin_sport1_uart_device = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -731,7 +729,7 @@ static struct platform_device bfin_dpmc = { }, }; -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) #include <asm/bfin-lq035q1.h> static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = { @@ -764,28 +762,28 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) &bf5xx_nand_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) &musb_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -794,11 +792,11 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) &bfin_lq035q1_device, #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -807,11 +805,11 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -820,11 +818,11 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &ezbrd_flash_device, #endif }; diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index d0a0c5e527c..d64f565dc2a 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -42,7 +42,7 @@ const char bfin_board_name[] = "ADI BF527-EZKIT"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) #include <linux/usb/isp1760.h> static struct resource bfin_isp1760_resources[] = { [0] = { @@ -77,7 +77,7 @@ static struct platform_device bfin_isp1760_device = { }; #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) static struct resource musb_resources[] = { [0] = { .start = 0xffc03800, @@ -139,7 +139,7 @@ static struct platform_device musb_device = { }; #endif -#if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_T350MCQB) static struct resource bf52x_t350mcqb_resources[] = { { @@ -157,7 +157,7 @@ static struct platform_device bf52x_t350mcqb_device = { }; #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) #include <asm/bfin-lq035q1.h> static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = { @@ -184,7 +184,7 @@ static struct platform_device bfin_lq035q1_device = { }; #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition ezkit_partitions[] = { { .name = "bootloader(nor)", @@ -224,7 +224,7 @@ static struct platform_device ezkit_flash_device = { }; #endif -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) static struct mtd_partition partition_info[] = { { .name = "bootloader(nand)", @@ -274,7 +274,7 @@ static struct platform_device bf5xx_nand_device = { }; #endif -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) static struct resource bfin_pcmcia_cf_resources[] = { { .start = 0x20310000, /* IO PORT */ @@ -303,14 +303,14 @@ static struct platform_device bfin_pcmcia_cf_device = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -343,7 +343,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +#if IS_ENABLED(CONFIG_DM9000) static struct resource dm9000_resources[] = { [0] = { .start = 0x203FB800, @@ -370,7 +370,7 @@ static struct platform_device dm9000_device = { }; #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_RMII0; @@ -403,7 +403,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x20300000, @@ -427,8 +427,7 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -455,13 +454,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -477,7 +476,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879) #include <linux/spi/ad7879.h> static const struct ad7879_platform_data bfin_ad7879_ts_info = { .model = 7879, /* Model = AD7879 */ @@ -493,7 +492,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { }; #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) static const u16 bfin_snd_pin[][7] = { {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, @@ -541,21 +540,21 @@ static struct resource bfin_snd_resources[][4] = { }; #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) static struct platform_device bfin_i2s_pcm = { .name = "bfin-i2s-pcm-audio", .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) static struct platform_device bfin_ac97_pcm = { .name = "bfin-ac97-pcm-audio", .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) static struct platform_device bfin_i2s = { .name = "bfin-i2s", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -567,8 +566,7 @@ static struct platform_device bfin_i2s = { }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \ - || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) static const char * const ad1836_link[] = { "bfin-i2s.0", "spi0.4", @@ -583,8 +581,7 @@ static struct platform_device bfin_ad1836_machine = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -597,8 +594,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ - || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -608,7 +604,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -619,7 +615,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, @@ -629,7 +625,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 2, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI) { .modalias = "ad7879", .platform_data = &bfin_ad7879_ts_info, @@ -640,7 +636,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_CPHA | SPI_CPOL, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -648,7 +644,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 1, }, #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) { .modalias = "bfin-lq035q1-spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -659,7 +655,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, @@ -697,7 +693,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -808,7 +804,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -863,7 +859,7 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -890,7 +886,7 @@ static struct platform_device i2c_bfin_twi_device = { }; #endif -#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE) +#if IS_ENABLED(CONFIG_PMIC_ADP5520) #include <linux/mfd/adp5520.h> /* @@ -956,54 +952,54 @@ static struct adp5520_platform_data adp5520_pdev_data = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, #endif -#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE) +#if IS_ENABLED(CONFIG_INPUT_PCF8574) { I2C_BOARD_INFO("pcf8574_keypad", 0x27), .irq = IRQ_PF8, }, #endif -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_7393) { I2C_BOARD_INFO("bfin-adv7393", 0x2B), }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_I2C) { I2C_BOARD_INFO("ad7879", 0x2C), .irq = IRQ_PF8, .platform_data = (void *)&bfin_ad7879_ts_info, }, #endif -#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE) +#if IS_ENABLED(CONFIG_PMIC_ADP5520) { I2C_BOARD_INFO("pmic-adp5520", 0x32), .irq = IRQ_PF9, .platform_data = (void *)&adp5520_pdev_data, }, #endif -#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_SSM2602) { I2C_BOARD_INFO("ssm2602", 0x1b), }, #endif -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("ad5252", 0x2f), }, #endif -#if defined(CONFIG_SND_SOC_ADAU1373) || defined(CONFIG_SND_SOC_ADAU1373_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_ADAU1373) { I2C_BOARD_INFO("adau1373", 0x1A), }, #endif }; -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -1074,7 +1070,7 @@ static struct platform_device bfin_sport1_uart_device = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/gpio_keys.h> static struct gpio_keys_button bfin_gpio_keys_table[] = { @@ -1095,7 +1091,7 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) +#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY) #include <asm/bfin_rotary.h> static struct bfin_rotary_platform_data bfin_rotary_data = { @@ -1153,56 +1149,56 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) &bf5xx_nand_device, #endif -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) &bfin_pcmcia_cf_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) &bfin_isp1760_device, #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) &musb_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +#if IS_ENABLED(CONFIG_DM9000) &dm9000_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_T350MCQB) &bf52x_t350mcqb_device, #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) &bfin_lq035q1_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -1211,7 +1207,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -1220,11 +1216,11 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -1233,32 +1229,31 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) +#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY) &bfin_rotary_device, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &ezkit_flash_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s_pcm, #endif -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) &bfin_ac97_pcm, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \ - defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) &bfin_ad1836_machine, #endif }; diff --git a/arch/blackfin/mach-bf527/boards/tll6527m.c b/arch/blackfin/mach-bf527/boards/tll6527m.c index 1509c5a8a3f..a0f5856a5ff 100644 --- a/arch/blackfin/mach-bf527/boards/tll6527m.c +++ b/arch/blackfin/mach-bf527/boards/tll6527m.c @@ -28,8 +28,7 @@ #include <asm/portmux.h> #include <asm/dpmc.h> -#if defined(CONFIG_TOUCHSCREEN_AD7879) \ - || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879) #include <linux/spi/ad7879.h> #define LCD_BACKLIGHT_GPIO 0x40 /* TLL6527M uses TLL7UIQ35 / ADI LCD EZ Extender. AD7879 AUX GPIO is used for @@ -45,7 +44,7 @@ const char bfin_board_name[] = "TLL6527M"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) static struct resource musb_resources[] = { [0] = { .start = 0xffc03800, @@ -104,7 +103,7 @@ static struct platform_device musb_device = { }; #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) #include <asm/bfin-lq035q1.h> static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = { @@ -133,7 +132,7 @@ static struct platform_device bfin_lq035q1_device = { }; #endif -#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR) static struct mtd_partition tll6527m_partitions[] = { { .name = "bootloader(nor)", @@ -182,7 +181,7 @@ static struct platform_device tll6527m_flash_device = { }; #endif -#if defined(CONFIG_GPIO_DECODER) || defined(CONFIG_GPIO_DECODER_MODULE) +#if IS_ENABLED(CONFIG_GPIO_DECODER) /* An SN74LVC138A 3:8 decoder chip has been used to generate 7 augmented * outputs used as SPI CS lines for all SPI SLAVE devices on TLL6527v1-0. * EXP_GPIO_SPISEL_BASE is the base number for the expanded outputs being @@ -215,7 +214,7 @@ static struct platform_device spi_decoded_gpio = { #endif -#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE) +#if IS_ENABLED(CONFIG_INPUT_ADXL34X) #include <linux/input/adxl34x.h> static const struct adxl34x_platform_data adxl345_info = { .x_axis_offset = 0, @@ -250,14 +249,14 @@ static const struct adxl34x_platform_data adxl345_info = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_RMII0; @@ -290,8 +289,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -318,14 +316,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879) \ - || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879) static const struct ad7879_platform_data bfin_ad7879_ts_info = { .model = 7879, /* Model = AD7879 */ .x_plate_ohms = 620, /* 620 Ohm from the touch datasheet */ @@ -343,7 +340,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { }; #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) static struct platform_device bfin_i2s = { .name = "bfin-i2s", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -351,7 +348,7 @@ static struct platform_device bfin_i2s = { }; #endif -#if defined(CONFIG_GPIO_MCP23S08) || defined(CONFIG_GPIO_MCP23S08_MODULE) +#if IS_ENABLED(CONFIG_GPIO_MCP23S08) #include <linux/spi/mcp23s08.h> static const struct mcp23s08_platform_data bfin_mcp23s08_sys_gpio_info = { .chip[0].is_present = true, @@ -364,8 +361,7 @@ static const struct mcp23s08_platform_data bfin_mcp23s08_usr_gpio_info = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -381,7 +377,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", /* @@ -396,8 +392,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_0, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) \ - || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI) { .modalias = "ad7879", .platform_data = &bfin_ad7879_ts_info, @@ -409,7 +404,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_CPHA | SPI_CPOL, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 10000000, @@ -419,7 +414,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_CPHA | SPI_CPOL, }, #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) { .modalias = "bfin-lq035q1-spi", .max_speed_hz = 20000000, @@ -428,7 +423,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_CPHA | SPI_CPOL, }, #endif -#if defined(CONFIG_GPIO_MCP23S08) || defined(CONFIG_GPIO_MCP23S08_MODULE) +#if IS_ENABLED(CONFIG_GPIO_MCP23S08) { .modalias = "mcp23s08", .platform_data = &bfin_mcp23s08_sys_gpio_info, @@ -448,7 +443,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = EXP_GPIO_SPISEL_BASE + 8 + MAX_CTRL_CS, @@ -487,7 +482,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -600,7 +595,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -655,7 +650,7 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -683,26 +678,25 @@ static struct platform_device i2c_bfin_twi_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, #endif -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_7393) { I2C_BOARD_INFO("bfin-adv7393", 0x2B), }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) \ - || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_I2C) { I2C_BOARD_INFO("ad7879", 0x2C), .irq = IRQ_PH14, .platform_data = (void *)&bfin_ad7879_ts_info, }, #endif -#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_SSM2602) { I2C_BOARD_INFO("ssm2602", 0x1b), }, @@ -714,8 +708,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { { I2C_BOARD_INFO("ltc3576", 0x09), }, -#if defined(CONFIG_INPUT_ADXL34X_I2C) \ - || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE) +#if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C) { I2C_BOARD_INFO("adxl34x", 0x53), .irq = IRQ_PH13, @@ -724,8 +717,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #endif }; -#if defined(CONFIG_SERIAL_BFIN_SPORT) \ - || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -823,28 +815,28 @@ static struct platform_device *tll6527m_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) &musb_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) &bfin_lq035q1_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -853,7 +845,7 @@ static struct platform_device *tll6527m_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -862,12 +854,11 @@ static struct platform_device *tll6527m_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) \ - || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -876,15 +867,15 @@ static struct platform_device *tll6527m_devices[] __initdata = { #endif #endif -#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR) &tll6527m_flash_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s, #endif -#if defined(CONFIG_GPIO_DECODER) || defined(CONFIG_GPIO_DECODER_MODULE) +#if IS_ENABLED(CONFIG_GPIO_DECODER) &spi_decoded_gpio, #endif }; diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c index 6cb7b3ed9b3..01300f40db1 100644 --- a/arch/blackfin/mach-bf533/boards/H8606.c +++ b/arch/blackfin/mach-bf533/boards/H8606.c @@ -14,7 +14,7 @@ #include <linux/mtd/partitions.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> #endif #include <linux/irq.h> @@ -29,7 +29,7 @@ */ const char bfin_board_name[] = "HV Sistemas H8606"; -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, @@ -39,7 +39,7 @@ static struct platform_device rtc_device = { /* * Driver needs to know address, irq and flag pin. */ - #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +#if IS_ENABLED(CONFIG_DM9000) static struct resource dm9000_resources[] = { [0] = { .start = 0x20300000, @@ -67,7 +67,7 @@ static struct platform_device dm9000_device = { }; #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -104,7 +104,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x20300000, @@ -125,10 +125,10 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader (spi)", @@ -166,7 +166,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { /* Notice: for blackfin, the speed_hz is the value of register * SPI_BAUD, not the real baudrate */ static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -180,7 +180,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 16, @@ -229,7 +229,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -280,7 +280,7 @@ static struct platform_device bfin_uart0_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -309,7 +309,7 @@ static struct platform_device bfin_sir0_device = { #endif #endif -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_8250) #include <linux/serial_8250.h> #include <linux/serial.h> @@ -353,7 +353,7 @@ static struct platform_device serial8250_device = { #endif -#if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_OPENCORES) /* * Configuration for one OpenCores keyboard controller in FPGA at address 0x20200030, @@ -382,43 +382,43 @@ static struct platform_device opencores_kbd_device = { #endif static struct platform_device *h8606_devices[] __initdata = { -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +#if IS_ENABLED(CONFIG_DM9000) &dm9000_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif #endif -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_8250) &serial8250_device, #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif #endif -#if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_OPENCORES) &opencores_kbd_device, #endif }; @@ -428,7 +428,7 @@ static int __init H8606_init(void) printk(KERN_INFO "HV Sistemas H8606 board support by http://www.hvsistemas.com\n"); printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(h8606_devices, ARRAY_SIZE(h8606_devices)); -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif return 0; diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c index de44a3765e5..63b0e4fe760 100644 --- a/arch/blackfin/mach-bf533/boards/blackstamp.c +++ b/arch/blackfin/mach-bf533/boards/blackstamp.c @@ -31,7 +31,7 @@ */ const char bfin_board_name[] = "BlackStamp"; -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, @@ -41,7 +41,7 @@ static struct platform_device rtc_device = { /* * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -74,7 +74,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -105,14 +105,14 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -125,7 +125,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -136,7 +136,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -146,7 +146,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -184,7 +184,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -235,7 +235,7 @@ static struct platform_device bfin_uart0_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -264,7 +264,7 @@ static struct platform_device bfin_sir0_device = { #endif #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -335,7 +335,7 @@ static struct platform_device bfin_sport1_uart_device = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -358,7 +358,7 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#if IS_ENABLED(CONFIG_I2C_GPIO) #include <linux/i2c-gpio.h> static struct i2c_gpio_platform_data i2c_gpio_data = { @@ -413,32 +413,32 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -447,11 +447,11 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#if IS_ENABLED(CONFIG_I2C_GPIO) &i2c_gpio_device, #endif }; @@ -469,7 +469,7 @@ static int __init blackstamp_init(void) if (ret < 0) return ret; -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) /* * setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC. * the bfin-async-map driver takes care of flipping between diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index fe47e048c4e..4ef2fb0e48d 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -15,7 +15,7 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/spi/mmc_spi.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> #endif #include <linux/irq.h> @@ -29,9 +29,9 @@ */ const char bfin_board_name[] = "Bluetechnix CM BF533"; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -62,14 +62,14 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -82,7 +82,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -91,7 +91,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -140,14 +140,14 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -178,7 +178,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#if IS_ENABLED(CONFIG_SMSC911X) #include <linux/smsc911x.h> static struct resource smsc911x_resources[] = { @@ -212,7 +212,7 @@ static struct platform_device smsc911x_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -263,7 +263,7 @@ static struct platform_device bfin_uart0_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -292,7 +292,7 @@ static struct platform_device bfin_sir0_device = { #endif #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -363,7 +363,7 @@ static struct platform_device bfin_sport1_uart_device = { #endif #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) static struct resource isp1362_hcd_resources[] = { { .start = 0x20308000, @@ -403,7 +403,7 @@ static struct platform_device isp1362_hcd_device = { #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x20300000, @@ -426,7 +426,7 @@ static struct platform_device net2272_bfin_device = { -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition para_partitions[] = { { .name = "bootloader(nor)", @@ -495,19 +495,19 @@ static struct platform_device *cm_bf533_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -516,31 +516,31 @@ static struct platform_device *cm_bf533_devices[] __initdata = { #endif #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) &isp1362_hcd_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#if IS_ENABLED(CONFIG_SMSC911X) &smsc911x_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) ¶_flash_device, #endif }; @@ -549,7 +549,7 @@ static int __init cm_bf533_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf533_devices, ARRAY_SIZE(cm_bf533_devices)); -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif return 0; diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 90fb0d14b14..3625e9eaa8a 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -14,7 +14,7 @@ #include <linux/mtd/physmap.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> #endif #include <linux/irq.h> @@ -29,7 +29,7 @@ */ const char bfin_board_name[] = "ADI BF533-EZKIT"; -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, @@ -40,7 +40,7 @@ static struct platform_device rtc_device = { * USB-LAN EzExtender board * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -72,7 +72,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition ezkit_partitions_a[] = { { .name = "bootloader(nor a)", @@ -138,7 +138,7 @@ static struct platform_device ezkit_flash_device_b = { }; #endif -#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE) +#if IS_ENABLED(CONFIG_MTD_PLATRAM) static struct platdata_mtd_ram sram_data_a = { .mapname = "Flash A SRAM", .bankwidth = 2, @@ -182,7 +182,7 @@ static struct platform_device sram_device_b = { }; #endif -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -214,7 +214,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -227,7 +227,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -235,7 +235,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 4, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -245,7 +245,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -283,7 +283,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -334,7 +334,7 @@ static struct platform_device bfin_uart0_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -363,7 +363,7 @@ static struct platform_device bfin_sir0_device = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -387,7 +387,7 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#if IS_ENABLED(CONFIG_I2C_GPIO) #include <linux/i2c-gpio.h> static struct i2c_gpio_platform_data i2c_gpio_data = { @@ -435,14 +435,14 @@ static struct platform_device bfin_dpmc = { }; static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_7393) { I2C_BOARD_INFO("bfin-adv7393", 0x2B), }, #endif }; -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) static struct platform_device bfin_i2s = { .name = "bfin-i2s", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -450,7 +450,7 @@ static struct platform_device bfin_i2s = { }; #endif -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) static struct platform_device bfin_ac97 = { .name = "bfin-ac97", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -462,53 +462,53 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &ezkit_flash_device_a, &ezkit_flash_device_b, #endif -#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE) +#if IS_ENABLED(CONFIG_MTD_PLATRAM) &sram_device_a, &sram_device_b, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#if IS_ENABLED(CONFIG_I2C_GPIO) &i2c_gpio_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s, #endif -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) &bfin_ac97, #endif }; diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c index e303dae4e2d..39c8e8547b8 100644 --- a/arch/blackfin/mach-bf533/boards/ip0x.c +++ b/arch/blackfin/mach-bf533/boards/ip0x.c @@ -15,7 +15,7 @@ #include <linux/mtd/partitions.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> #endif #include <asm/irq.h> @@ -32,7 +32,7 @@ const char bfin_board_name[] = "IP04/IP08"; * Driver needs to know address, irq and flag pin. */ #if defined(CONFIG_BFIN532_IP0X) -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +#if IS_ENABLED(CONFIG_DM9000) #include <linux/dm9000.h> @@ -104,10 +104,10 @@ static struct platform_device dm9000_device2 = { #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, /* if 1 - block!!! */ }; @@ -116,7 +116,7 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = { /* Notice: for blackfin, the speed_hz is the value of register * SPI_BAUD, not the real baudrate */ static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 2, @@ -142,7 +142,7 @@ static struct platform_device spi_bfin_master_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -193,7 +193,7 @@ static struct platform_device bfin_uart0_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -222,7 +222,7 @@ static struct platform_device bfin_sir0_device = { #endif #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) static struct resource isp1362_hcd_resources[] = { { .start = 0x20300000, @@ -264,29 +264,29 @@ static struct platform_device isp1362_hcd_device = { static struct platform_device *ip0x_devices[] __initdata = { #if defined(CONFIG_BFIN532_IP0X) -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +#if IS_ENABLED(CONFIG_DM9000) &dm9000_device1, &dm9000_device2, #endif #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &spi_bfin_master_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) &isp1362_hcd_device, #endif }; diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index 4da70c47cc0..d0989290f54 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -14,7 +14,7 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/spi/mmc_spi.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> #endif #include <linux/irq.h> @@ -30,7 +30,7 @@ */ const char bfin_board_name[] = "ADI BF533-STAMP"; -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, @@ -40,7 +40,7 @@ static struct platform_device rtc_device = { /* * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -73,7 +73,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x20300000, @@ -97,7 +97,7 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE) +#if IS_ENABLED(CONFIG_MTD_BFIN_ASYNC) static struct mtd_partition stamp_partitions[] = { { .name = "bootloader(nor)", @@ -147,7 +147,7 @@ static struct platform_device stamp_flash_device = { }; #endif -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -178,7 +178,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) #define MMC_SPI_CARD_DETECT_INT IRQ_PF5 static int bfin_mmc_spi_init(struct device *dev, irqreturn_t (*detect_int)(int, void *), void *data) @@ -206,7 +206,7 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -219,8 +219,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \ - defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) { .modalias = "ad1836", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -231,7 +230,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -239,7 +238,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 1, }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -252,7 +251,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -290,7 +289,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -341,7 +340,7 @@ static struct platform_device bfin_uart0_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -370,8 +369,7 @@ static struct platform_device bfin_sir0_device = { #endif #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || \ - defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -442,7 +440,7 @@ static struct platform_device bfin_sport1_uart_device = { #endif #endif -#if defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SPORT) static struct resource bfin_sport0_resources[] = { { .start = SPORT0_TCR1, @@ -486,7 +484,7 @@ static struct platform_device bfin_sport0_device = { }; #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -509,7 +507,7 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#if IS_ENABLED(CONFIG_I2C_GPIO) #include <linux/i2c-gpio.h> static struct i2c_gpio_platform_data i2c_gpio_data = { @@ -530,29 +528,29 @@ static struct platform_device i2c_gpio_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info[] = { -#if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE) +#if IS_ENABLED(CONFIG_JOYSTICK_AD7142) { I2C_BOARD_INFO("ad7142_joystick", 0x2C), .irq = 39, }, #endif -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, #endif -#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE) +#if IS_ENABLED(CONFIG_INPUT_PCF8574) { I2C_BOARD_INFO("pcf8574_keypad", 0x27), .irq = 39, }, #endif -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_7393) { I2C_BOARD_INFO("bfin-adv7393", 0x2B), }, #endif -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("ad5252", 0x2f), }, @@ -586,9 +584,8 @@ static struct platform_device bfin_dpmc = { }, }; -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \ - defined(CONFIG_SND_BF5XX_AC97) || \ - defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) || \ + IS_ENABLED(CONFIG_SND_BF5XX_AC97) #include <asm/bfin_sport.h> @@ -640,22 +637,21 @@ static struct resource bfin_snd_resources[][4] = { }; #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) static struct platform_device bfin_i2s_pcm = { .name = "bfin-i2s-pcm-audio", .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) static struct platform_device bfin_ac97_pcm = { .name = "bfin-ac97-pcm-audio", .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \ - || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) static const char * const ad1836_link[] = { "bfin-i2s.0", "spi0.4", @@ -669,8 +665,7 @@ static struct platform_device bfin_ad1836_machine = { }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \ - defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311) static const unsigned ad73311_gpio[] = { GPIO_PF4, }; @@ -684,22 +679,21 @@ static struct platform_device bfin_ad73311_machine = { }; #endif -#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_AD73311) static struct platform_device bfin_ad73311_codec_device = { .name = "ad73311", .id = -1, }; #endif -#if defined(CONFIG_SND_SOC_AD74111) || defined(CONFIG_SND_SOC_AD74111_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_AD74111) static struct platform_device bfin_ad74111_codec_device = { .name = "ad74111", .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_I2S) || \ - defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S) static struct platform_device bfin_i2s = { .name = "bfin-i2s", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -712,8 +706,7 @@ static struct platform_device bfin_i2s = { }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_AC97) || \ - defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97) static struct platform_device bfin_ac97 = { .name = "bfin-ac97", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -730,36 +723,35 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || \ - defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -768,58 +760,54 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#if IS_ENABLED(CONFIG_I2C_GPIO) &i2c_gpio_device, #endif -#if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE) +#if IS_ENABLED(CONFIG_MTD_BFIN_ASYNC) &stamp_flash_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s_pcm, #endif -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) &bfin_ac97_pcm, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \ - defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) &bfin_ad1836_machine, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \ - defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311) &bfin_ad73311_machine, #endif -#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_AD73311) &bfin_ad73311_codec_device, #endif -#if defined(CONFIG_SND_SOC_AD74111) || defined(CONFIG_SND_SOC_AD74111_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_AD74111) &bfin_ad74111_codec_device, #endif -#if defined(CONFIG_SND_BF5XX_SOC_I2S) || \ - defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S) &bfin_i2s, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AC97) || \ - defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97) &bfin_ac97, #endif }; static int __init net2272_init(void) { -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) int ret; /* Set PF0 to 0, PF1 to 1 make /AMS3 work properly */ @@ -865,7 +853,7 @@ static int __init stamp_init(void) if (ret < 0) return ret; -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) /* * setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC. * the bfin-async-map driver takes care of flipping between diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537e.c b/arch/blackfin/mach-bf537/boards/cm_bf537e.c index 85e4fc9f9c2..c65c6dbda3d 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537e.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537e.c @@ -16,7 +16,7 @@ #include <linux/mtd/physmap.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> #endif #include <linux/ata_platform.h> @@ -32,10 +32,10 @@ */ const char bfin_board_name[] = "Bluetechnix CM BF537E"; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -66,14 +66,14 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -86,7 +86,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -95,7 +95,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -144,7 +144,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN_SPORT) /* SPORT SPI controller data */ static struct bfin5xx_spi_master bfin_sport_spi0_info = { @@ -209,20 +209,20 @@ static struct platform_device bfin_sport_spi1_device = { #endif /* sport spi master and devices */ -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) +#if IS_ENABLED(CONFIG_FB_HITACHI_TX09) static struct platform_device hitachi_fb_device = { .name = "hitachi-tx09", }; #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -254,7 +254,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) static struct resource isp1362_hcd_resources[] = { { .start = 0x20308000, @@ -293,7 +293,7 @@ static struct platform_device isp1362_hcd_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x20300000, @@ -314,7 +314,7 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR) static struct mtd_partition cm_partitions[] = { { .name = "bootloader(nor)", @@ -363,7 +363,7 @@ static struct platform_device cm_flash_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -498,7 +498,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -551,7 +551,7 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -578,14 +578,14 @@ static struct platform_device i2c_bfin_twi_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) \ -|| defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) \ +|| IS_ENABLED(CONFIG_BFIN_SPORT) unsigned short bfin_sport0_peripherals[] = { P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 }; #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -650,7 +650,7 @@ static struct platform_device bfin_sport1_uart_device = { }; #endif #endif -#if defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SPORT) static struct resource bfin_sport0_resources[] = { { .start = SPORT0_TCR1, @@ -694,7 +694,7 @@ static struct platform_device bfin_sport0_device = { }; #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_MII0; @@ -727,7 +727,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) #define PATA_INT IRQ_PF14 static struct pata_platform_info bfin_pata_platform_data = { @@ -795,19 +795,19 @@ static struct platform_device *cm_bf537e_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SPORT) &bfin_sport0_device, #endif -#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) +#if IS_ENABLED(CONFIG_FB_HITACHI_TX09) &hitachi_fb_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -816,7 +816,7 @@ static struct platform_device *cm_bf537e_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -825,11 +825,11 @@ static struct platform_device *cm_bf537e_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -838,44 +838,44 @@ static struct platform_device *cm_bf537e_devices[] __initdata = { #endif #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) &isp1362_hcd_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN_SPORT) &bfin_sport_spi0_device, &bfin_sport_spi1_device, #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) &bfin_pata_device, #endif -#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR) &cm_flash_device, #endif }; static int __init net2272_init(void) { -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) int ret; ret = gpio_request(GPIO_PG14, "net2272"); @@ -895,11 +895,11 @@ static int __init cm_bf537e_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf537e_devices, ARRAY_SIZE(cm_bf537e_devices)); -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN); #endif diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537u.c b/arch/blackfin/mach-bf537/boards/cm_bf537u.c index 0143d8bef90..af58454b4bf 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537u.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537u.c @@ -16,7 +16,7 @@ #include <linux/mtd/physmap.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> #endif #include <linux/ata_platform.h> @@ -32,10 +32,10 @@ */ const char bfin_board_name[] = "Bluetechnix CM BF537U"; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -66,14 +66,14 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -86,7 +86,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -95,7 +95,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -144,20 +144,20 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) +#if IS_ENABLED(CONFIG_FB_HITACHI_TX09) static struct platform_device hitachi_fb_device = { .name = "hitachi-tx09", }; #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -189,7 +189,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) static struct resource isp1362_hcd_resources[] = { { .start = 0x20308000, @@ -228,7 +228,7 @@ static struct platform_device isp1362_hcd_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x20200000, @@ -249,7 +249,7 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR) static struct mtd_partition cm_partitions[] = { { .name = "bootloader(nor)", @@ -298,7 +298,7 @@ static struct platform_device cm_flash_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -397,7 +397,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -450,7 +450,7 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -477,7 +477,7 @@ static struct platform_device i2c_bfin_twi_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -548,7 +548,7 @@ static struct platform_device bfin_sport1_uart_device = { #endif #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_MII0; @@ -581,7 +581,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) #define PATA_INT IRQ_PF14 static struct pata_platform_info bfin_pata_platform_data = { @@ -649,15 +649,15 @@ static struct platform_device *cm_bf537u_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) +#if IS_ENABLED(CONFIG_FB_HITACHI_TX09) &hitachi_fb_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -666,7 +666,7 @@ static struct platform_device *cm_bf537u_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -675,11 +675,11 @@ static struct platform_device *cm_bf537u_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -688,39 +688,39 @@ static struct platform_device *cm_bf537u_devices[] __initdata = { #endif #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) &isp1362_hcd_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) &bfin_pata_device, #endif -#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR) &cm_flash_device, #endif }; static int __init net2272_init(void) { -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) int ret; ret = gpio_request(GPIO_PH15, driver_name); @@ -752,11 +752,11 @@ static int __init cm_bf537u_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf537u_devices, ARRAY_SIZE(cm_bf537u_devices)); -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN); #endif diff --git a/arch/blackfin/mach-bf537/boards/dnp5370.c b/arch/blackfin/mach-bf537/boards/dnp5370.c index 8bbf0a23fd4..e79b3b810c3 100644 --- a/arch/blackfin/mach-bf537/boards/dnp5370.c +++ b/arch/blackfin/mach-bf537/boards/dnp5370.c @@ -41,14 +41,14 @@ const char bfin_board_name[] = "DNP/5370"; #define FLASH_MAC 0x202f0000 #define CONFIG_MTD_PHYSMAP_LEN 0x300000 -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_RMII0; @@ -81,7 +81,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition asmb_flash_partitions[] = { { .name = "bootloader(nor)", @@ -125,9 +125,9 @@ static struct platform_device asmb_flash_device = { }; #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, /* use no dma transfer with this chip*/ @@ -135,7 +135,7 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = { #endif -#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE) +#if IS_ENABLED(CONFIG_MTD_DATAFLASH) /* This mapping is for at45db642 it has 1056 page size, * partition size and offset should be page aligned */ @@ -166,7 +166,7 @@ static struct bfin5xx_spi_chip spi_dataflash_chip_info = { static struct spi_board_info bfin_spi_board_info[] __initdata = { /* SD/MMC card reader at SPI bus */ -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 20000000, @@ -178,7 +178,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif /* 8 Megabyte Atmel NOR flash chip at SPI bus */ -#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE) +#if IS_ENABLED(CONFIG_MTD_DATAFLASH) { .modalias = "mtd_dataflash", .max_speed_hz = 16700000, @@ -228,7 +228,7 @@ static struct platform_device spi_bfin_master_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -328,7 +328,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -357,7 +357,7 @@ static struct platform_device i2c_bfin_twi_device = { static struct platform_device *dnp5370_devices[] __initdata = { -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -366,24 +366,24 @@ static struct platform_device *dnp5370_devices[] __initdata = { #endif #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &asmb_flash_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &spi_bfin_master_device, #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c index a10f90e444b..dd7bda07bf9 100644 --- a/arch/blackfin/mach-bf537/boards/minotaur.c +++ b/arch/blackfin/mach-bf537/boards/minotaur.c @@ -13,7 +13,7 @@ #include <linux/mtd/partitions.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> #endif #include <linux/ata_platform.h> @@ -31,7 +31,7 @@ */ const char bfin_board_name[] = "CamSig Minotaur BF537"; -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) static struct resource bfin_pcmcia_cf_resources[] = { { .start = 0x20310000, /* IO PORT */ @@ -60,14 +60,14 @@ static struct platform_device bfin_pcmcia_cf_device = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_MII0; @@ -100,7 +100,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x20300000, @@ -121,11 +121,10 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) /* Partition sizes */ #define FLASH_SIZE 0x00400000 @@ -162,15 +161,14 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -183,7 +181,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ @@ -231,7 +229,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -330,7 +328,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -385,7 +383,7 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -412,7 +410,7 @@ static struct platform_device i2c_bfin_twi_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -484,28 +482,28 @@ static struct platform_device bfin_sport1_uart_device = { #endif static struct platform_device *minotaur_devices[] __initdata = { -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) &bfin_pcmcia_cf_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -514,7 +512,7 @@ static struct platform_device *minotaur_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -523,11 +521,11 @@ static struct platform_device *minotaur_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -542,7 +540,7 @@ static int __init minotaur_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(minotaur_devices, ARRAY_SIZE(minotaur_devices)); -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index 6b395510405..06a50ddb54c 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -30,7 +30,7 @@ const char bfin_board_name[] = "ADI PNAV-1.0"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) static struct resource bfin_pcmcia_cf_resources[] = { { .start = 0x20310000, /* IO PORT */ @@ -59,14 +59,14 @@ static struct platform_device bfin_pcmcia_cf_device = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -99,7 +99,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_RMII0; @@ -132,7 +132,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x20300000, @@ -153,11 +153,10 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -188,13 +187,13 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -211,8 +210,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -225,8 +223,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ - || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -234,7 +231,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 4, }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ @@ -244,7 +241,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, @@ -294,13 +291,13 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) +#if IS_ENABLED(CONFIG_FB_BF537_LQ035) static struct platform_device bfin_fb_device = { .name = "bf537-lq035", }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -399,7 +396,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -455,36 +452,36 @@ static struct platform_device bfin_sir1_device = { #endif static struct platform_device *stamp_devices[] __initdata = { -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) &bfin_pcmcia_cf_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) +#if IS_ENABLED(CONFIG_FB_BF537_LQ035) &bfin_fb_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -493,7 +490,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -507,7 +504,7 @@ static int __init pnav_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 44fd1d4682a..de19b8a5600 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -18,7 +18,7 @@ #include <linux/mtd/physmap.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> #endif #include <linux/i2c.h> @@ -53,7 +53,7 @@ const char bfin_board_name[] = "ADI BF537-STAMP"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) #include <linux/usb/isp1760.h> static struct resource bfin_isp1760_resources[] = { [0] = { @@ -88,7 +88,7 @@ static struct platform_device bfin_isp1760_device = { }; #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/gpio_keys.h> static struct gpio_keys_button bfin_gpio_keys_table[] = { @@ -111,7 +111,7 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) static struct resource bfin_pcmcia_cf_resources[] = { { .start = 0x20310000, /* IO PORT */ @@ -140,14 +140,14 @@ static struct platform_device bfin_pcmcia_cf_device = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -180,7 +180,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +#if IS_ENABLED(CONFIG_DM9000) static struct resource dm9000_resources[] = { [0] = { .start = 0x203FB800, @@ -207,7 +207,7 @@ static struct platform_device dm9000_device = { }; #endif -#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_SL811_HCD) static struct resource sl811_hcd_resources[] = { { .start = 0x20340000, @@ -251,7 +251,7 @@ static struct platform_device sl811_hcd_device = { }; #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) static struct resource isp1362_hcd_resources[] = { { .start = 0x20360000, @@ -290,7 +290,7 @@ static struct platform_device isp1362_hcd_device = { }; #endif -#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +#if IS_ENABLED(CONFIG_CAN_BFIN) static unsigned short bfin_can_peripherals[] = { P_CAN0_RX, P_CAN0_TX, 0 }; @@ -328,7 +328,7 @@ static struct platform_device bfin_can_device = { }; #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_MII0; @@ -361,7 +361,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x20300000, @@ -385,7 +385,7 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM) const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL }; static struct mtd_partition bfin_plat_nand_partitions[] = { @@ -461,7 +461,7 @@ static void bfin_plat_nand_init(void) static void bfin_plat_nand_init(void) {} #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition stamp_partitions[] = { { .name = "bootloader(nor)", @@ -509,8 +509,7 @@ static struct platform_device stamp_flash_device = { }; #endif -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -541,7 +540,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE) +#if IS_ENABLED(CONFIG_INPUT_AD714X_SPI) #include <linux/input/ad714x.h> static struct ad714x_slider_plat ad7147_spi_slider_plat[] = { @@ -602,7 +601,7 @@ static struct ad714x_platform_data ad7147_spi_platform_data = { }; #endif -#if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE) +#if IS_ENABLED(CONFIG_INPUT_AD714X_I2C) #include <linux/input/ad714x.h> static struct ad714x_button_plat ad7142_i2c_button_plat[] = { { @@ -649,24 +648,24 @@ static struct ad714x_platform_data ad7142_i2c_platform_data = { }; #endif -#if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE) +#if IS_ENABLED(CONFIG_AD2S90) static struct bfin5xx_spi_chip ad2s90_spi_chip_info = { .enable_dma = 0, }; #endif -#if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE) -static unsigned short ad2s120x_platform_data[] = { +#if IS_ENABLED(CONFIG_AD2S1200) +static unsigned short ad2s1200_platform_data[] = { /* used as SAMPLE and RDVEL */ GPIO_PF5, GPIO_PF6, 0 }; -static struct bfin5xx_spi_chip ad2s120x_spi_chip_info = { +static struct bfin5xx_spi_chip ad2s1200_spi_chip_info = { .enable_dma = 0, }; #endif -#if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE) +#if IS_ENABLED(CONFIG_AD2S1210) static unsigned short ad2s1210_platform_data[] = { /* use as SAMPLE, A0, A1 */ GPIO_PF7, GPIO_PF8, GPIO_PF9, @@ -682,13 +681,13 @@ static struct bfin5xx_spi_chip ad2s1210_spi_chip_info = { }; #endif -#if defined(CONFIG_AD7314) || defined(CONFIG_AD7314_MODULE) +#if IS_ENABLED(CONFIG_SENSORS_AD7314) static struct bfin5xx_spi_chip ad7314_spi_chip_info = { .enable_dma = 0, }; #endif -#if defined(CONFIG_AD7816) || defined(CONFIG_AD7816_MODULE) +#if IS_ENABLED(CONFIG_AD7816) static unsigned short ad7816_platform_data[] = { GPIO_PF4, /* rdwr_pin */ GPIO_PF5, /* convert_pin */ @@ -701,7 +700,7 @@ static struct bfin5xx_spi_chip ad7816_spi_chip_info = { }; #endif -#if defined(CONFIG_ADT7310) || defined(CONFIG_ADT7310_MODULE) +#if IS_ENABLED(CONFIG_ADT7310) static unsigned long adt7310_platform_data[3] = { /* INT bound temperature alarm event. line 1 */ IRQ_PG4, IRQF_TRIGGER_LOW, @@ -714,14 +713,14 @@ static struct bfin5xx_spi_chip adt7310_spi_chip_info = { }; #endif -#if defined(CONFIG_AD7298) || defined(CONFIG_AD7298_MODULE) +#if IS_ENABLED(CONFIG_AD7298) static unsigned short ad7298_platform_data[] = { GPIO_PF7, /* busy_pin */ 0, }; #endif -#if defined(CONFIG_ADT7316_SPI) || defined(CONFIG_ADT7316_SPI_MODULE) +#if IS_ENABLED(CONFIG_ADT7316_SPI) static unsigned long adt7316_spi_data[2] = { IRQF_TRIGGER_LOW, /* interrupt flags */ GPIO_PF7, /* ldac_pin, 0 means DAC/LDAC registers control DAC update */ @@ -732,7 +731,7 @@ static struct bfin5xx_spi_chip adt7316_spi_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) #define MMC_SPI_CARD_DETECT_INT IRQ_PF5 static int bfin_mmc_spi_init(struct device *dev, @@ -759,7 +758,7 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = { }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) #include <linux/spi/ad7877.h> static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, @@ -776,7 +775,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879) #include <linux/spi/ad7879.h> static const struct ad7879_platform_data bfin_ad7879_ts_info = { .model = 7879, /* Model = AD7879 */ @@ -793,7 +792,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { }; #endif -#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE) +#if IS_ENABLED(CONFIG_INPUT_ADXL34X) #include <linux/input/adxl34x.h> static const struct adxl34x_platform_data adxl34x_info = { .x_axis_offset = 0, @@ -832,13 +831,13 @@ static const struct adxl34x_platform_data adxl34x_info = { }; #endif -#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE) +#if IS_ENABLED(CONFIG_ENC28J60) static struct bfin5xx_spi_chip enc28j60_spi_chip_info = { .enable_dma = 1, }; #endif -#if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE) +#if IS_ENABLED(CONFIG_ADF702X) #include <linux/spi/adf702x.h> #define TXREG 0x0160A470 static const u32 adf7021_regs[] = { @@ -880,7 +879,7 @@ static inline void adf702x_mac_init(void) static inline void adf702x_mac_init(void) {} #endif -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_ADS7846) #include <linux/spi/ads7846.h> static int ads7873_get_pendown_state(void) { @@ -899,8 +898,7 @@ static struct ads7846_platform_data __initdata ad7873_pdata = { }; #endif -#if defined(CONFIG_MTD_DATAFLASH) \ - || defined(CONFIG_MTD_DATAFLASH_MODULE) +#if IS_ENABLED(CONFIG_MTD_DATAFLASH) static struct mtd_partition bfin_spi_dataflash_partitions[] = { { @@ -931,15 +929,14 @@ static struct bfin5xx_spi_chip data_flash_chip_info = { }; #endif -#if defined(CONFIG_AD7476) || defined(CONFIG_AD7476_MODULE) +#if IS_ENABLED(CONFIG_AD7476) static struct bfin5xx_spi_chip spi_ad7476_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ }; #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -951,8 +948,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_MTD_DATAFLASH) \ - || defined(CONFIG_MTD_DATAFLASH_MODULE) +#if IS_ENABLED(CONFIG_MTD_DATAFLASH) { /* DataFlash chip */ .modalias = "mtd_dataflash", .max_speed_hz = 33250000, /* max spi clock (SCK) speed in HZ */ @@ -964,8 +960,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \ - || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) { .modalias = "ad1836", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -986,7 +981,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_SOC_ADAV80X) || defined(CONFIG_SND_SOC_ADV80X_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_ADAV80X) { .modalias = "adav801", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -996,7 +991,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE) +#if IS_ENABLED(CONFIG_INPUT_AD714X_SPI) { .modalias = "ad714x_captouch", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1008,7 +1003,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE) +#if IS_ENABLED(CONFIG_AD2S90) { .modalias = "ad2s90", .bus_num = 0, @@ -1019,17 +1014,17 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE) +#if IS_ENABLED(CONFIG_AD2S1200) { - .modalias = "ad2s120x", + .modalias = "ad2s1200", .bus_num = 0, .chip_select = 4, /* CS, change it for your board */ - .platform_data = ad2s120x_platform_data, - .controller_data = &ad2s120x_spi_chip_info, + .platform_data = ad2s1200_platform_data, + .controller_data = &ad2s1200_spi_chip_info, }, #endif -#if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE) +#if IS_ENABLED(CONFIG_AD2S1210) { .modalias = "ad2s1210", .max_speed_hz = 8192000, @@ -1040,7 +1035,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_AD7314) || defined(CONFIG_AD7314_MODULE) +#if IS_ENABLED(CONFIG_SENSORS_AD7314) { .modalias = "ad7314", .max_speed_hz = 1000000, @@ -1051,7 +1046,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_AD7816) || defined(CONFIG_AD7816_MODULE) +#if IS_ENABLED(CONFIG_AD7816) { .modalias = "ad7818", .max_speed_hz = 1000000, @@ -1063,7 +1058,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_ADT7310) || defined(CONFIG_ADT7310_MODULE) +#if IS_ENABLED(CONFIG_ADT7310) { .modalias = "adt7310", .max_speed_hz = 1000000, @@ -1076,7 +1071,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_AD7298) || defined(CONFIG_AD7298_MODULE) +#if IS_ENABLED(CONFIG_AD7298) { .modalias = "ad7298", .max_speed_hz = 1000000, @@ -1087,7 +1082,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_ADT7316_SPI) || defined(CONFIG_ADT7316_SPI_MODULE) +#if IS_ENABLED(CONFIG_ADT7316_SPI) { .modalias = "adt7316", .max_speed_hz = 1000000, @@ -1100,7 +1095,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -1111,7 +1106,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, @@ -1121,7 +1116,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 1, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI) { .modalias = "ad7879", .platform_data = &bfin_ad7879_ts_info, @@ -1132,7 +1127,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_CPHA | SPI_CPOL, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -1140,7 +1135,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 1, }, #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) { .modalias = "bfin-lq035q1-spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -1149,7 +1144,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_CPHA | SPI_CPOL, }, #endif -#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE) +#if IS_ENABLED(CONFIG_ENC28J60) { .modalias = "enc28j60", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -1160,7 +1155,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_0, }, #endif -#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE) +#if IS_ENABLED(CONFIG_INPUT_ADXL34X_SPI) { .modalias = "adxl34x", .platform_data = &adxl34x_info, @@ -1171,7 +1166,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE) +#if IS_ENABLED(CONFIG_ADF702X) { .modalias = "adf702x", .max_speed_hz = 16000000, /* max spi clock (SCK) speed in HZ */ @@ -1181,7 +1176,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_0, }, #endif -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_ADS7846) { .modalias = "ads7846", .max_speed_hz = 2000000, /* max spi clock (SCK) speed in HZ */ @@ -1192,8 +1187,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_0, }, #endif -#if defined(CONFIG_AD7476) \ - || defined(CONFIG_AD7476_MODULE) +#if IS_ENABLED(CONFIG_AD7476) { .modalias = "ad7476", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ @@ -1204,8 +1198,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_ADE7753) \ - || defined(CONFIG_ADE7753_MODULE) +#if IS_ENABLED(CONFIG_ADE7753) { .modalias = "ade7753", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1215,8 +1208,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_1, }, #endif -#if defined(CONFIG_ADE7754) \ - || defined(CONFIG_ADE7754_MODULE) +#if IS_ENABLED(CONFIG_ADE7754) { .modalias = "ade7754", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1226,8 +1218,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_1, }, #endif -#if defined(CONFIG_ADE7758) \ - || defined(CONFIG_ADE7758_MODULE) +#if IS_ENABLED(CONFIG_ADE7758) { .modalias = "ade7758", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1237,8 +1228,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_1, }, #endif -#if defined(CONFIG_ADE7759) \ - || defined(CONFIG_ADE7759_MODULE) +#if IS_ENABLED(CONFIG_ADE7759) { .modalias = "ade7759", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1248,8 +1238,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_1, }, #endif -#if defined(CONFIG_ADE7854_SPI) \ - || defined(CONFIG_ADE7854_SPI_MODULE) +#if IS_ENABLED(CONFIG_ADE7854_SPI) { .modalias = "ade7854", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1259,8 +1248,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_ADIS16060) \ - || defined(CONFIG_ADIS16060_MODULE) +#if IS_ENABLED(CONFIG_ADIS16060) { .modalias = "adis16060_r", .max_speed_hz = 2900000, /* max spi clock (SCK) speed in HZ */ @@ -1278,8 +1266,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_1, }, #endif -#if defined(CONFIG_ADIS16130) \ - || defined(CONFIG_ADIS16130_MODULE) +#if IS_ENABLED(CONFIG_ADIS16130) { .modalias = "adis16130", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1289,8 +1276,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_ADIS16201) \ - || defined(CONFIG_ADIS16201_MODULE) +#if IS_ENABLED(CONFIG_ADIS16201) { .modalias = "adis16201", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1301,8 +1287,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .irq = IRQ_PF4, }, #endif -#if defined(CONFIG_ADIS16203) \ - || defined(CONFIG_ADIS16203_MODULE) +#if IS_ENABLED(CONFIG_ADIS16203) { .modalias = "adis16203", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1313,8 +1298,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .irq = IRQ_PF4, }, #endif -#if defined(CONFIG_ADIS16204) \ - || defined(CONFIG_ADIS16204_MODULE) +#if IS_ENABLED(CONFIG_ADIS16204) { .modalias = "adis16204", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1325,8 +1309,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .irq = IRQ_PF4, }, #endif -#if defined(CONFIG_ADIS16209) \ - || defined(CONFIG_ADIS16209_MODULE) +#if IS_ENABLED(CONFIG_ADIS16209) { .modalias = "adis16209", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1337,8 +1320,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .irq = IRQ_PF4, }, #endif -#if defined(CONFIG_ADIS16220) \ - || defined(CONFIG_ADIS16220_MODULE) +#if IS_ENABLED(CONFIG_ADIS16220) { .modalias = "adis16220", .max_speed_hz = 2000000, /* max spi clock (SCK) speed in HZ */ @@ -1349,8 +1331,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .irq = IRQ_PF4, }, #endif -#if defined(CONFIG_ADIS16240) \ - || defined(CONFIG_ADIS16240_MODULE) +#if IS_ENABLED(CONFIG_ADIS16240) { .modalias = "adis16240", .max_speed_hz = 1500000, /* max spi clock (SCK) speed in HZ */ @@ -1361,8 +1342,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .irq = IRQ_PF4, }, #endif -#if defined(CONFIG_ADIS16260) \ - || defined(CONFIG_ADIS16260_MODULE) +#if IS_ENABLED(CONFIG_ADIS16260) { .modalias = "adis16260", .max_speed_hz = 1500000, /* max spi clock (SCK) speed in HZ */ @@ -1373,8 +1353,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .irq = IRQ_PF4, }, #endif -#if defined(CONFIG_ADIS16261) \ - || defined(CONFIG_ADIS16261_MODULE) +#if IS_ENABLED(CONFIG_ADIS16261) { .modalias = "adis16261", .max_speed_hz = 2500000, /* max spi clock (SCK) speed in HZ */ @@ -1384,8 +1363,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_ADIS16300) \ - || defined(CONFIG_ADIS16300_MODULE) +#if IS_ENABLED(CONFIG_ADIS16300) { .modalias = "adis16300", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1396,8 +1374,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .irq = IRQ_PF4, }, #endif -#if defined(CONFIG_ADIS16350) \ - || defined(CONFIG_ADIS16350_MODULE) +#if IS_ENABLED(CONFIG_ADIS16350) { .modalias = "adis16364", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1408,8 +1385,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .irq = IRQ_PF4, }, #endif -#if defined(CONFIG_ADIS16400) \ - || defined(CONFIG_ADIS16400_MODULE) +#if IS_ENABLED(CONFIG_ADIS16400) { .modalias = "adis16400", .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ @@ -1421,7 +1397,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, @@ -1459,7 +1435,7 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN_SPORT) /* SPORT SPI controller data */ static struct bfin5xx_spi_master bfin_sport_spi0_info = { @@ -1524,13 +1500,13 @@ static struct platform_device bfin_sport_spi1_device = { #endif /* sport spi master and devices */ -#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) +#if IS_ENABLED(CONFIG_FB_BF537_LQ035) static struct platform_device bfin_fb_device = { .name = "bf537_lq035", }; #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) #include <asm/bfin-lq035q1.h> static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = { @@ -1559,8 +1535,7 @@ static struct platform_device bfin_lq035q1_device = { }; #endif -#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \ - || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) #include <linux/videodev2.h> #include <media/blackfin/bfin_capture.h> #include <media/blackfin/ppi.h> @@ -1580,8 +1555,7 @@ static const struct ppi_info ppi_info = { .pin_req = ppi_req, }; -#if defined(CONFIG_VIDEO_VS6624) \ - || defined(CONFIG_VIDEO_VS6624_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_VS6624) static struct v4l2_input vs6624_inputs[] = { { .index = 0, @@ -1624,7 +1598,7 @@ static struct platform_device bfin_capture_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -1735,7 +1709,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -1790,7 +1764,7 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -1817,7 +1791,7 @@ static struct platform_device i2c_bfin_twi_device = { }; #endif -#if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_ADP5588) static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = { [0] = KEY_GRAVE, [1] = KEY_1, @@ -1902,7 +1876,7 @@ static struct adp5588_kpad_platform_data adp5588_kpad_data = { }; #endif -#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE) +#if IS_ENABLED(CONFIG_PMIC_ADP5520) #include <linux/mfd/adp5520.h> /* @@ -2013,14 +1987,14 @@ static struct adp5520_platform_data adp5520_pdev_data = { #endif -#if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE) +#if IS_ENABLED(CONFIG_GPIO_ADP5588) static struct adp5588_gpio_platform_data adp5588_gpio_data = { .gpio_start = 50, .pullup_dis_mask = 0, }; #endif -#if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE) +#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8870) #include <linux/i2c/adp8870.h> static struct led_info adp8870_leds[] = { { @@ -2072,7 +2046,7 @@ static struct adp8870_backlight_platform_data adp8870_pdata = { }; #endif -#if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE) +#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8860) #include <linux/i2c/adp8860.h> static struct led_info adp8860_leds[] = { { @@ -2114,7 +2088,7 @@ static struct adp8860_backlight_platform_data adp8860_pdata = { }; #endif -#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE) +#if IS_ENABLED(CONFIG_REGULATOR_AD5398) static struct regulator_consumer_supply ad5398_consumer = { .supply = "current", }; @@ -2129,8 +2103,7 @@ static struct regulator_init_data ad5398_regulator_data = { .consumer_supplies = &ad5398_consumer, }; -#if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \ - defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE) +#if IS_ENABLED(CONFIG_REGULATOR_VIRTUAL_CONSUMER) static struct platform_device ad5398_virt_consumer_device = { .name = "reg-virt-consumer", .id = 0, @@ -2139,8 +2112,7 @@ static struct platform_device ad5398_virt_consumer_device = { }, }; #endif -#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \ - defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE) +#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER) static struct regulator_bulk_data ad5398_bulk_data = { .supply = "current", }; @@ -2161,14 +2133,14 @@ static struct platform_device ad5398_userspace_consumer_device = { #endif #endif -#if defined(CONFIG_ADT7410) || defined(CONFIG_ADT7410_MODULE) +#if IS_ENABLED(CONFIG_ADT7410) /* INT bound temperature alarm event. line 1 */ static unsigned long adt7410_platform_data[2] = { IRQ_PG4, IRQF_TRIGGER_LOW, }; #endif -#if defined(CONFIG_ADT7316_I2C) || defined(CONFIG_ADT7316_I2C_MODULE) +#if IS_ENABLED(CONFIG_ADT7316_I2C) /* INT bound temperature alarm event. line 1 */ static unsigned long adt7316_i2c_data[2] = { IRQF_TRIGGER_LOW, /* interrupt flags */ @@ -2183,13 +2155,13 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif -#if defined(CONFIG_SND_SOC_ADAV80X) || defined(CONFIG_SND_SOC_ADAV80X_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_ADAV80X) { I2C_BOARD_INFO("adav803", 0x10), }, #endif -#if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE) +#if IS_ENABLED(CONFIG_INPUT_AD714X_I2C) { I2C_BOARD_INFO("ad7142_captouch", 0x2C), .irq = IRQ_PG5, @@ -2197,39 +2169,39 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif -#if defined(CONFIG_AD7150) || defined(CONFIG_AD7150_MODULE) +#if IS_ENABLED(CONFIG_AD7150) { I2C_BOARD_INFO("ad7150", 0x48), .irq = IRQ_PG5, /* fixme: use real interrupt number */ }, #endif -#if defined(CONFIG_AD7152) || defined(CONFIG_AD7152_MODULE) +#if IS_ENABLED(CONFIG_AD7152) { I2C_BOARD_INFO("ad7152", 0x48), }, #endif -#if defined(CONFIG_AD774X) || defined(CONFIG_AD774X_MODULE) +#if IS_ENABLED(CONFIG_AD774X) { I2C_BOARD_INFO("ad774x", 0x48), }, #endif -#if defined(CONFIG_ADE7854_I2C) || defined(CONFIG_ADE7854_I2C_MODULE) +#if IS_ENABLED(CONFIG_ADE7854_I2C) { I2C_BOARD_INFO("ade7854", 0x38), }, #endif -#if defined(CONFIG_ADT75) || defined(CONFIG_ADT75_MODULE) +#if IS_ENABLED(CONFIG_SENSORS_LM75) { I2C_BOARD_INFO("adt75", 0x9), .irq = IRQ_PG5, }, #endif -#if defined(CONFIG_ADT7410) || defined(CONFIG_ADT7410_MODULE) +#if IS_ENABLED(CONFIG_ADT7410) { I2C_BOARD_INFO("adt7410", 0x48), /* CT critical temperature event. line 0 */ @@ -2238,14 +2210,14 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif -#if defined(CONFIG_AD7291) || defined(CONFIG_AD7291_MODULE) +#if IS_ENABLED(CONFIG_AD7291) { I2C_BOARD_INFO("ad7291", 0x20), .irq = IRQ_PG5, }, #endif -#if defined(CONFIG_ADT7316_I2C) || defined(CONFIG_ADT7316_I2C_MODULE) +#if IS_ENABLED(CONFIG_ADT7316_I2C) { I2C_BOARD_INFO("adt7316", 0x48), .irq = IRQ_PG6, @@ -2253,128 +2225,128 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, #endif -#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE) +#if IS_ENABLED(CONFIG_INPUT_PCF8574) { I2C_BOARD_INFO("pcf8574_keypad", 0x27), .irq = IRQ_PG6, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_I2C) { I2C_BOARD_INFO("ad7879", 0x2F), .irq = IRQ_PG5, .platform_data = (void *)&bfin_ad7879_ts_info, }, #endif -#if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_ADP5588) { I2C_BOARD_INFO("adp5588-keys", 0x34), .irq = IRQ_PG0, .platform_data = (void *)&adp5588_kpad_data, }, #endif -#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE) +#if IS_ENABLED(CONFIG_PMIC_ADP5520) { I2C_BOARD_INFO("pmic-adp5520", 0x32), .irq = IRQ_PG0, .platform_data = (void *)&adp5520_pdev_data, }, #endif -#if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE) +#if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C) { I2C_BOARD_INFO("adxl34x", 0x53), .irq = IRQ_PG3, .platform_data = (void *)&adxl34x_info, }, #endif -#if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE) +#if IS_ENABLED(CONFIG_GPIO_ADP5588) { I2C_BOARD_INFO("adp5588-gpio", 0x34), .platform_data = (void *)&adp5588_gpio_data, }, #endif -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_7393) { I2C_BOARD_INFO("bfin-adv7393", 0x2B), }, #endif -#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) +#if IS_ENABLED(CONFIG_FB_BF537_LQ035) { I2C_BOARD_INFO("bf537-lq035-ad5280", 0x2F), }, #endif -#if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE) +#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8870) { I2C_BOARD_INFO("adp8870", 0x2B), .platform_data = (void *)&adp8870_pdata, }, #endif -#if defined(CONFIG_SND_SOC_ADAU1371) || defined(CONFIG_SND_SOC_ADAU1371_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_ADAU1371) { I2C_BOARD_INFO("adau1371", 0x1A), }, #endif -#if defined(CONFIG_SND_SOC_ADAU1761) || defined(CONFIG_SND_SOC_ADAU1761_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_ADAU1761) { I2C_BOARD_INFO("adau1761", 0x38), }, #endif -#if defined(CONFIG_SND_SOC_ADAU1361) || defined(CONFIG_SND_SOC_ADAU1361_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_ADAU1361) { I2C_BOARD_INFO("adau1361", 0x38), }, #endif -#if defined(CONFIG_SND_SOC_ADAU1701) || defined(CONFIG_SND_SOC_ADAU1701_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_ADAU1701) { I2C_BOARD_INFO("adau1701", 0x34), }, #endif -#if defined(CONFIG_AD525X_DPOT) || defined(CONFIG_AD525X_DPOT_MODULE) +#if IS_ENABLED(CONFIG_AD525X_DPOT) { I2C_BOARD_INFO("ad5258", 0x18), }, #endif -#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_SSM2602) { I2C_BOARD_INFO("ssm2602", 0x1b), }, #endif -#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE) +#if IS_ENABLED(CONFIG_REGULATOR_AD5398) { I2C_BOARD_INFO("ad5398", 0xC), .platform_data = (void *)&ad5398_regulator_data, }, #endif -#if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE) +#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8860) { I2C_BOARD_INFO("adp8860", 0x2A), .platform_data = (void *)&adp8860_pdata, }, #endif -#if defined(CONFIG_SND_SOC_ADAU1373) || defined(CONFIG_SND_SOC_ADAU1373_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_ADAU1373) { I2C_BOARD_INFO("adau1373", 0x1A), }, #endif -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("ad5252", 0x2e), }, #endif }; -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) \ -|| defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) \ +|| IS_ENABLED(CONFIG_BFIN_SPORT) unsigned short bfin_sport0_peripherals[] = { P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 }; #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -2439,7 +2411,7 @@ static struct platform_device bfin_sport1_uart_device = { }; #endif #endif -#if defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SPORT) static struct resource bfin_sport0_resources[] = { { .start = SPORT0_TCR1, @@ -2482,7 +2454,7 @@ static struct platform_device bfin_sport0_device = { }, }; #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) #define CF_IDE_NAND_CARD_USE_HDD_INTERFACE /* #define CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE */ @@ -2569,8 +2541,8 @@ static struct platform_device bfin_dpmc = { }, }; -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \ - defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) || \ + IS_ENABLED(CONFIG_SND_BF5XX_AC97) #define SPORT_REQ(x) \ [x] = {P_SPORT##x##_TFS, P_SPORT##x##_DTPRI, P_SPORT##x##_TSCLK, \ @@ -2620,22 +2592,21 @@ static struct resource bfin_snd_resources[][4] = { }; #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) static struct platform_device bfin_i2s_pcm = { .name = "bfin-i2s-pcm-audio", .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) static struct platform_device bfin_ac97_pcm = { .name = "bfin-ac97-pcm-audio", .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \ - || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) static const char * const ad1836_link[] = { "bfin-i2s.0", "spi0.4", @@ -2649,8 +2620,7 @@ static struct platform_device bfin_ad1836_machine = { }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \ - defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311) static const unsigned ad73311_gpio[] = { GPIO_PF4, }; @@ -2664,22 +2634,21 @@ static struct platform_device bfin_ad73311_machine = { }; #endif -#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_AD73311) static struct platform_device bfin_ad73311_codec_device = { .name = "ad73311", .id = -1, }; #endif -#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) || \ - defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) static struct platform_device bfin_eval_adav801_device = { .name = "bfin-eval-adav801", .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_I2S) || defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S) static struct platform_device bfin_i2s = { .name = "bfin-i2s", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -2691,7 +2660,7 @@ static struct platform_device bfin_i2s = { }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_AC97) || defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97) static struct platform_device bfin_ac97 = { .name = "bfin-ac97", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -2703,7 +2672,7 @@ static struct platform_device bfin_ac97 = { }; #endif -#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE) +#if IS_ENABLED(CONFIG_REGULATOR_FIXED_VOLTAGE) #define REGULATOR_ADP122 "adp122" #define REGULATOR_ADP122_UV 2500000 @@ -2741,8 +2710,7 @@ static struct platform_device adp_switch_device = { }, }; -#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \ - defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE) +#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER) static struct regulator_bulk_data adp122_bulk_data = { .supply = REGULATOR_ADP122, }; @@ -2763,8 +2731,7 @@ static struct platform_device adp122_userspace_consumer_device = { #endif #endif -#if defined(CONFIG_IIO_GPIO_TRIGGER) || \ - defined(CONFIG_IIO_GPIO_TRIGGER_MODULE) +#if IS_ENABLED(CONFIG_IIO_GPIO_TRIGGER) static struct resource iio_gpio_trigger_resources[] = { [0] = { @@ -2781,15 +2748,13 @@ static struct platform_device iio_gpio_trigger = { }; #endif -#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) || \ - defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) static struct platform_device bf5xx_adau1373_device = { .name = "bfin-eval-adau1373", }; #endif -#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) || \ - defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) static struct platform_device bf5xx_adau1701_device = { .name = "bfin-eval-adau1701", }; @@ -2798,73 +2763,72 @@ static struct platform_device bf5xx_adau1701_device = { static struct platform_device *stamp_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SPORT) &bfin_sport0_device, #endif -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA) &bfin_pcmcia_cf_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_SL811_HCD) &sl811_hcd_device, #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) &isp1362_hcd_device, #endif -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) &bfin_isp1760_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +#if IS_ENABLED(CONFIG_DM9000) &dm9000_device, #endif -#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +#if IS_ENABLED(CONFIG_CAN_BFIN) &bfin_can_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN_SPORT) &bfin_sport_spi0_device, &bfin_sport_spi1_device, #endif -#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) +#if IS_ENABLED(CONFIG_FB_BF537_LQ035) &bfin_fb_device, #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) &bfin_lq035q1_device, #endif -#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \ - || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) &bfin_capture_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -2873,7 +2837,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -2882,11 +2846,11 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -2895,95 +2859,86 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) &bfin_pata_device, #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM) &bfin_async_nand_device, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &stamp_flash_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s_pcm, #endif -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) &bfin_ac97_pcm, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \ - defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) &bfin_ad1836_machine, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \ - defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311) &bfin_ad73311_machine, #endif -#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_AD73311) &bfin_ad73311_codec_device, #endif -#if defined(CONFIG_SND_BF5XX_SOC_I2S) || defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S) &bfin_i2s, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AC97) || defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97) &bfin_ac97, #endif -#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE) -#if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \ - defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE) +#if IS_ENABLED(CONFIG_REGULATOR_AD5398) +#if IS_ENABLED(CONFIG_REGULATOR_VIRTUAL_CONSUMER) &ad5398_virt_consumer_device, #endif -#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \ - defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE) +#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER) &ad5398_userspace_consumer_device, #endif #endif -#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE) +#if IS_ENABLED(CONFIG_REGULATOR_FIXED_VOLTAGE) &adp_switch_device, -#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \ - defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE) +#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER) &adp122_userspace_consumer_device, #endif #endif -#if defined(CONFIG_IIO_GPIO_TRIGGER) || \ - defined(CONFIG_IIO_GPIO_TRIGGER_MODULE) +#if IS_ENABLED(CONFIG_IIO_GPIO_TRIGGER) &iio_gpio_trigger, #endif -#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) || \ - defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) &bf5xx_adau1373_device, #endif -#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) || \ - defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) &bf5xx_adau1701_device, #endif -#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) || \ - defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) &bfin_eval_adav801_device, #endif }; static int __init net2272_init(void) { -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) int ret; ret = gpio_request(GPIO_PF6, "net2272"); diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c index e285c367528..a0211225748 100644 --- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c @@ -16,7 +16,7 @@ #include <linux/mtd/physmap.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> #endif #include <linux/ata_platform.h> @@ -32,10 +32,10 @@ */ const char bfin_board_name[] = "Bluetechnix TCM BF537"; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -66,14 +66,14 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) static struct bfin5xx_spi_chip mmc_spi_chip_info = { .enable_dma = 0, }; #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -86,7 +86,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -95,7 +95,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ @@ -144,20 +144,20 @@ static struct platform_device bfin_spi0_device = { }; #endif /* spi master and devices */ -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) +#if IS_ENABLED(CONFIG_FB_HITACHI_TX09) static struct platform_device hitachi_fb_device = { .name = "hitachi-tx09", }; #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -189,7 +189,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) static struct resource isp1362_hcd_resources[] = { { .start = 0x20308000, @@ -228,7 +228,7 @@ static struct platform_device isp1362_hcd_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x20300000, @@ -249,7 +249,7 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR) static struct mtd_partition cm_partitions[] = { { .name = "bootloader(nor)", @@ -298,7 +298,7 @@ static struct platform_device cm_flash_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -397,7 +397,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -452,7 +452,7 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -479,7 +479,7 @@ static struct platform_device i2c_bfin_twi_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -550,7 +550,7 @@ static struct platform_device bfin_sport1_uart_device = { #endif #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) #include <linux/bfin_mac.h> static const unsigned short bfin_mac_peripherals[] = P_MII0; @@ -583,7 +583,7 @@ static struct platform_device bfin_mac_device = { }; #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) #define PATA_INT IRQ_PF14 static struct pata_platform_info bfin_pata_platform_data = { @@ -651,15 +651,15 @@ static struct platform_device *cm_bf537_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) +#if IS_ENABLED(CONFIG_FB_HITACHI_TX09) &hitachi_fb_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -668,7 +668,7 @@ static struct platform_device *cm_bf537_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -677,11 +677,11 @@ static struct platform_device *cm_bf537_devices[] __initdata = { #endif #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -690,39 +690,39 @@ static struct platform_device *cm_bf537_devices[] __initdata = { #endif #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) &isp1362_hcd_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +#if IS_ENABLED(CONFIG_BFIN_MAC) &bfin_mii_bus, &bfin_mac_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) &bfin_pata_device, #endif -#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR) &cm_flash_device, #endif }; static int __init net2272_init(void) { -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) int ret; ret = gpio_request(GPIO_PG14, "net2272"); @@ -742,11 +742,11 @@ static int __init tcm_bf537_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices)); -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN); #endif diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c index 755f0dc1201..ae2fcbb0011 100644 --- a/arch/blackfin/mach-bf538/boards/ezkit.c +++ b/arch/blackfin/mach-bf538/boards/ezkit.c @@ -33,14 +33,14 @@ const char bfin_board_name[] = "ADI BF538-EZKIT"; */ -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif /* CONFIG_RTC_DRV_BFIN */ -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -199,7 +199,7 @@ static struct platform_device bfin_uart2_device = { #endif /* CONFIG_SERIAL_BFIN_UART2 */ #endif /* CONFIG_SERIAL_BFIN */ -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -277,7 +277,7 @@ static struct platform_device bfin_sir2_device = { #endif /* CONFIG_BFIN_SIR2 */ #endif /* CONFIG_BFIN_SIR */ -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -416,7 +416,7 @@ static struct platform_device bfin_sport3_uart_device = { #endif /* CONFIG_SERIAL_BFIN_SPORT3_UART */ #endif /* CONFIG_SERIAL_BFIN_SPORT */ -#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +#if IS_ENABLED(CONFIG_CAN_BFIN) static unsigned short bfin_can_peripherals[] = { P_CAN0_RX, P_CAN0_TX, 0 }; @@ -458,7 +458,7 @@ static struct platform_device bfin_can_device = { * USB-LAN EzExtender board * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -490,10 +490,9 @@ static struct platform_device smc91x_device = { }; #endif /* CONFIG_SMC91X */ -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) /* SPI flash chip (m25p16) */ static struct mtd_partition bfin_spi_flash_partitions[] = { { @@ -521,7 +520,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { #endif /* CONFIG_MTD_M25P80 */ #endif /* CONFIG_SPI_BFIN5XX */ -#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879) #include <linux/spi/ad7879.h> static const struct ad7879_platform_data bfin_ad7879_ts_info = { .model = 7879, /* Model = AD7879 */ @@ -538,7 +537,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { }; #endif /* CONFIG_TOUCHSCREEN_AD7879 */ -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) #include <asm/bfin-lq035q1.h> static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = { @@ -568,8 +567,7 @@ static struct platform_device bfin_lq035q1_device = { #endif /* CONFIG_FB_BFIN_LQ035Q1 */ static struct spi_board_info bf538_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -581,7 +579,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif /* CONFIG_MTD_M25P80 */ -#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI) { .modalias = "ad7879", .platform_data = &bfin_ad7879_ts_info, @@ -592,7 +590,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = { .mode = SPI_CPHA | SPI_CPOL, }, #endif /* CONFIG_TOUCHSCREEN_AD7879_SPI */ -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) { .modalias = "bfin-lq035q1-spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -601,7 +599,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = { .mode = SPI_CPHA | SPI_CPOL, }, #endif /* CONFIG_FB_BFIN_LQ035Q1 */ -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -717,7 +715,7 @@ static struct platform_device bf538_spi_master2 = { }, }; -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -766,7 +764,7 @@ static struct platform_device i2c_bfin_twi1_device = { }; #endif /* CONFIG_I2C_BLACKFIN_TWI */ -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/gpio_keys.h> static struct gpio_keys_button bfin_gpio_keys_table[] = { @@ -814,7 +812,7 @@ static struct platform_device bfin_dpmc = { }, }; -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition ezkit_partitions[] = { { .name = "bootloader(nor)", @@ -839,7 +837,7 @@ static struct physmap_flash_data ezkit_flash_data = { static struct resource ezkit_flash_resource = { .start = 0x20000000, -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) .end = 0x202fffff, #else .end = 0x203fffff, @@ -862,11 +860,11 @@ static struct platform_device *cm_bf538_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -878,18 +876,18 @@ static struct platform_device *cm_bf538_devices[] __initdata = { #endif #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bf538_spi_master0, &bf538_spi_master1, &bf538_spi_master2, #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi0_device, &i2c_bfin_twi1_device, #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -901,7 +899,7 @@ static struct platform_device *cm_bf538_devices[] __initdata = { #endif #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -916,23 +914,23 @@ static struct platform_device *cm_bf538_devices[] __initdata = { #endif #endif -#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +#if IS_ENABLED(CONFIG_CAN_BFIN) &bfin_can_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) +#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1) &bfin_lq035q1_device, #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &ezkit_flash_device, #endif }; @@ -942,7 +940,7 @@ static int __init ezkit_init(void) printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf538_devices, ARRAY_SIZE(cm_bf538_devices)); -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) spi_register_board_info(bf538_spi_board_info, ARRAY_SIZE(bf538_spi_board_info)); #endif diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c index e92543362f3..6d5ffdead06 100644 --- a/arch/blackfin/mach-bf548/boards/cm_bf548.c +++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c @@ -37,7 +37,7 @@ const char bfin_board_name[] = "Bluetechnix CM-BF548"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) +#if IS_ENABLED(CONFIG_FB_BF54X_LQ043) #include <mach/bf54x-lq043.h> @@ -69,7 +69,7 @@ static struct platform_device bf54x_lq043_device = { }; #endif -#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_BFIN) static unsigned int bf548_keymap[] = { KEYVAL(0, 0, KEY_ENTER), KEYVAL(0, 1, KEY_HELP), @@ -119,14 +119,14 @@ static struct platform_device bf54x_kpad_device = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -353,7 +353,7 @@ static struct platform_device bfin_uart3_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -456,7 +456,7 @@ static struct platform_device bfin_sir3_device = { #endif #endif -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#if IS_ENABLED(CONFIG_SMSC911X) #include <linux/smsc911x.h> static struct resource smsc911x_resources[] = { @@ -491,7 +491,7 @@ static struct platform_device smsc911x_device = { }; #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) static struct resource musb_resources[] = { [0] = { .start = 0xFFC03C00, @@ -553,7 +553,7 @@ static struct platform_device musb_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -692,7 +692,7 @@ static struct platform_device bfin_sport3_uart_device = { #endif #endif -#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) +#if IS_ENABLED(CONFIG_PATA_BF54X) static struct resource bfin_atapi_resources[] = { { .start = 0xFFC03800, @@ -714,7 +714,7 @@ static struct platform_device bfin_atapi_device = { }; #endif -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) static struct mtd_partition partition_info[] = { { .name = "linux kernel(nand)", @@ -760,7 +760,7 @@ static struct platform_device bf5xx_nand_device = { }; #endif -#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SDH_BFIN) static struct bfin_sd_host bfin_sdh_data = { .dma_chan = CH_SDH, .irq_int0 = IRQ_SDH_MASK0, @@ -776,7 +776,7 @@ static struct platform_device bf54x_sdh_device = { }; #endif -#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +#if IS_ENABLED(CONFIG_CAN_BFIN) static unsigned short bfin_can_peripherals[] = { P_CAN0_RX, P_CAN0_TX, 0 }; @@ -814,7 +814,7 @@ static struct platform_device bfin_can_device = { }; #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition para_partitions[] = { { .name = "bootloader(nor)", @@ -854,10 +854,9 @@ static struct platform_device para_flash_device = { }; #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) /* SPI flash chip (m25p16) */ static struct mtd_partition bfin_spi_flash_partitions[] = { { @@ -884,7 +883,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -901,8 +900,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { #endif static struct spi_board_info bf54x_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -914,7 +912,7 @@ static struct spi_board_info bf54x_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, @@ -924,7 +922,7 @@ static struct spi_board_info bf54x_spi_board_info[] __initdata = { .chip_select = 2, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -1006,7 +1004,7 @@ static struct platform_device bf54x_spi_master1 = { }; #endif /* spi master and devices */ -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -1060,7 +1058,7 @@ static struct platform_device i2c_bfin_twi1_device = { #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/gpio_keys.h> static struct gpio_keys_button bfin_gpio_keys_table[] = { @@ -1112,11 +1110,11 @@ static struct platform_device *cm_bf548_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -1131,7 +1129,7 @@ static struct platform_device *cm_bf548_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -1146,19 +1144,19 @@ static struct platform_device *cm_bf548_devices[] __initdata = { #endif #endif -#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) +#if IS_ENABLED(CONFIG_FB_BF54X_LQ043) &bf54x_lq043_device, #endif -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#if IS_ENABLED(CONFIG_SMSC911X) &smsc911x_device, #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) &musb_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -1173,43 +1171,43 @@ static struct platform_device *cm_bf548_devices[] __initdata = { #endif #endif -#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) +#if IS_ENABLED(CONFIG_PATA_BF54X) &bfin_atapi_device, #endif -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) &bf5xx_nand_device, #endif -#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SDH_BFIN) &bf54x_sdh_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bf54x_spi_master0, &bf54x_spi_master1, #endif -#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_BFIN) &bf54x_kpad_device, #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi0_device, #if !defined(CONFIG_BF542) &i2c_bfin_twi1_device, #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) ¶_flash_device, #endif -#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +#if IS_ENABLED(CONFIG_CAN_BFIN) &bfin_can_device, #endif @@ -1220,7 +1218,7 @@ static int __init cm_bf548_init(void) printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf548_devices, ARRAY_SIZE(cm_bf548_devices)); -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) spi_register_board_info(bf54x_spi_board_info, ARRAY_SIZE(bf54x_spi_board_info)); #endif diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index d495000b81a..90138e6112c 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -41,7 +41,7 @@ const char bfin_board_name[] = "ADI BF548-EZKIT"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) #include <linux/usb/isp1760.h> static struct resource bfin_isp1760_resources[] = { [0] = { @@ -76,7 +76,7 @@ static struct platform_device bfin_isp1760_device = { }; #endif -#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) +#if IS_ENABLED(CONFIG_FB_BF54X_LQ043) #include <mach/bf54x-lq043.h> @@ -108,7 +108,7 @@ static struct platform_device bf54x_lq043_device = { }; #endif -#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_BFIN) static const unsigned int bf548_keymap[] = { KEYVAL(0, 0, KEY_ENTER), KEYVAL(0, 1, KEY_HELP), @@ -158,7 +158,7 @@ static struct platform_device bf54x_kpad_device = { }; #endif -#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) +#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY) #include <asm/bfin_rotary.h> static struct bfin_rotary_platform_data bfin_rotary_data = { @@ -190,7 +190,7 @@ static struct platform_device bfin_rotary_device = { }; #endif -#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE) +#if IS_ENABLED(CONFIG_INPUT_ADXL34X) #include <linux/input/adxl34x.h> static const struct adxl34x_platform_data adxl34x_info = { .x_axis_offset = 0, @@ -229,14 +229,14 @@ static const struct adxl34x_platform_data adxl34x_info = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -491,7 +491,7 @@ static struct platform_device bfin_uart3_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -594,7 +594,7 @@ static struct platform_device bfin_sir3_device = { #endif #endif -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#if IS_ENABLED(CONFIG_SMSC911X) #include <linux/smsc911x.h> static struct resource smsc911x_resources[] = { @@ -629,7 +629,7 @@ static struct platform_device smsc911x_device = { }; #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) static struct resource musb_resources[] = { [0] = { .start = 0xFFC03C00, @@ -691,7 +691,7 @@ static struct platform_device musb_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -830,7 +830,7 @@ static struct platform_device bfin_sport3_uart_device = { #endif #endif -#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +#if IS_ENABLED(CONFIG_CAN_BFIN) static unsigned short bfin_can0_peripherals[] = { P_CAN0_RX, P_CAN0_TX, 0 @@ -908,7 +908,7 @@ static struct platform_device bfin_can1_device = { #endif -#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) +#if IS_ENABLED(CONFIG_PATA_BF54X) static struct resource bfin_atapi_resources[] = { { .start = 0xFFC03800, @@ -930,7 +930,7 @@ static struct platform_device bfin_atapi_device = { }; #endif -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) static struct mtd_partition partition_info[] = { { .name = "bootloader(nand)", @@ -980,7 +980,7 @@ static struct platform_device bf5xx_nand_device = { }; #endif -#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SDH_BFIN) static struct bfin_sd_host bfin_sdh_data = { .dma_chan = CH_SDH, @@ -997,7 +997,7 @@ static struct platform_device bf54x_sdh_device = { }; #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition ezkit_partitions[] = { { .name = "bootloader(nor)", @@ -1045,8 +1045,7 @@ static struct platform_device ezkit_flash_device = { }; #endif -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) /* SPI flash chip (m25p16) */ static struct mtd_partition bfin_spi_flash_partitions[] = { { @@ -1073,7 +1072,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -1495,8 +1494,7 @@ static struct platform_device bfin_gpj_device = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -1508,8 +1506,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ - || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -1517,7 +1514,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = MAX_CTRL_CS + GPIO_PG6, /* SPI_SSEL2 */ }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, @@ -1527,7 +1524,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = MAX_CTRL_CS + GPIO_PE5, /* SPI_SSEL2 */ }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -1535,7 +1532,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = MAX_CTRL_CS + GPIO_PE4, /* SPI_SSEL1 */ }, #endif -#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE) +#if IS_ENABLED(CONFIG_INPUT_ADXL34X_SPI) { .modalias = "adxl34x", .platform_data = &adxl34x_info, @@ -1547,7 +1544,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif }; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -1620,8 +1617,7 @@ static struct platform_device bf54x_spi_master1 = { }; #endif /* spi master and devices */ -#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \ - || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) #include <linux/videodev2.h> #include <media/blackfin/bfin_capture.h> #include <media/blackfin/ppi.h> @@ -1641,8 +1637,7 @@ static const struct ppi_info ppi_info = { .pin_req = ppi_req, }; -#if defined(CONFIG_VIDEO_VS6624) \ - || defined(CONFIG_VIDEO_VS6624_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_VS6624) static struct v4l2_input vs6624_inputs[] = { { .index = 0, @@ -1687,7 +1682,7 @@ static struct platform_device bfin_capture_device = { }; #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -1742,7 +1737,7 @@ static struct platform_device i2c_bfin_twi1_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info0[] = { -#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_SSM2602) { I2C_BOARD_INFO("ssm2602", 0x1b), }, @@ -1751,25 +1746,25 @@ static struct i2c_board_info __initdata bfin_i2c_board_info0[] = { #if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ static struct i2c_board_info __initdata bfin_i2c_board_info1[] = { -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), }, #endif -#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE) +#if IS_ENABLED(CONFIG_INPUT_PCF8574) { I2C_BOARD_INFO("pcf8574_keypad", 0x27), .irq = 212, }, #endif -#if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE) +#if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C) { I2C_BOARD_INFO("adxl34x", 0x53), .irq = IRQ_PC5, .platform_data = (void *)&adxl34x_info, }, #endif -#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) +#if IS_ENABLED(CONFIG_BFIN_TWI_LCD) { I2C_BOARD_INFO("ad5252", 0x2f), }, @@ -1777,7 +1772,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info1[] = { }; #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/gpio_keys.h> static struct gpio_keys_button bfin_gpio_keys_table[] = { @@ -1828,8 +1823,8 @@ static struct platform_device bfin_dpmc = { }, }; -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \ - defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) || \ + IS_ENABLED(CONFIG_SND_BF5XX_AC97) #define SPORT_REQ(x) \ [x] = {P_SPORT##x##_TFS, P_SPORT##x##_DTPRI, P_SPORT##x##_TSCLK, \ @@ -1889,35 +1884,35 @@ static struct resource bfin_snd_resources[][4] = { }; #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) static struct platform_device bfin_i2s_pcm = { .name = "bfin-i2s-pcm-audio", .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) static struct platform_device bfin_ac97_pcm = { .name = "bfin-ac97-pcm-audio", .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311) static struct platform_device bfin_ad73311_codec_device = { .name = "ad73311", .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1980) || defined(CONFIG_SND_BF5XX_SOC_AD1980_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1980) static struct platform_device bfin_ad1980_codec_device = { .name = "ad1980", .id = -1, }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_I2S) || defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S) static struct platform_device bfin_i2s = { .name = "bfin-i2s", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -1929,7 +1924,7 @@ static struct platform_device bfin_i2s = { }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_AC97) || defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97) static struct platform_device bfin_ac97 = { .name = "bfin-ac97", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -1962,11 +1957,11 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_gpj_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -1981,7 +1976,7 @@ static struct platform_device *ezkit_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -1996,23 +1991,23 @@ static struct platform_device *ezkit_devices[] __initdata = { #endif #endif -#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) +#if IS_ENABLED(CONFIG_FB_BF54X_LQ043) &bf54x_lq043_device, #endif -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#if IS_ENABLED(CONFIG_SMSC911X) &smsc911x_device, #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) &musb_device, #endif -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) &bfin_isp1760_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -2027,72 +2022,71 @@ static struct platform_device *ezkit_devices[] __initdata = { #endif #endif -#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +#if IS_ENABLED(CONFIG_CAN_BFIN) &bfin_can0_device, &bfin_can1_device, #endif -#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) +#if IS_ENABLED(CONFIG_PATA_BF54X) &bfin_atapi_device, #endif -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) &bf5xx_nand_device, #endif -#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SDH_BFIN) &bf54x_sdh_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bf54x_spi_master0, &bf54x_spi_master1, #endif -#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \ - || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) &bfin_capture_device, #endif -#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_BFIN) &bf54x_kpad_device, #endif -#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) +#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY) &bfin_rotary_device, #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi0_device, #if !defined(CONFIG_BF542) &i2c_bfin_twi1_device, #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &ezkit_flash_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s_pcm, #endif -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) &bfin_ac97_pcm, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1980) || defined(CONFIG_SND_BF5XX_SOC_AD1980_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1980) &bfin_ad1980_codec_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s, #endif -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) &bfin_ac97, #endif }; diff --git a/arch/blackfin/mach-bf548/include/mach/defBF544.h b/arch/blackfin/mach-bf548/include/mach/defBF544.h index 329b2c58228..018ebfc27f5 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF544.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF544.h @@ -601,36 +601,6 @@ #define GU_TRANS 0xff00 /* Transparent Color - G/U Component */ #define BV_TRANS 0xff0000 /* Transparent Color - B/V Component */ -/* Bit masks for HOST_CONTROL */ - -#define HOST_EN 0x1 /* Host Enable */ -#define HOST_END 0x2 /* Host Endianess */ -#define DATA_SIZE 0x4 /* Data Size */ -#define HOST_RST 0x8 /* Host Reset */ -#define HRDY_OVR 0x20 /* Host Ready Override */ -#define INT_MODE 0x40 /* Interrupt Mode */ -#define BT_EN 0x80 /* Bus Timeout Enable */ -#define EHW 0x100 /* Enable Host Write */ -#define EHR 0x200 /* Enable Host Read */ -#define BDR 0x400 /* Burst DMA Requests */ - -/* Bit masks for HOST_STATUS */ - -#define DMA_READY 0x1 /* DMA Ready */ -#define FIFOFULL 0x2 /* FIFO Full */ -#define FIFOEMPTY 0x4 /* FIFO Empty */ -#define DMA_COMPLETE 0x8 /* DMA Complete */ -#define HSHK 0x10 /* Host Handshake */ -#define HSTIMEOUT 0x20 /* Host Timeout */ -#define HIRQ 0x40 /* Host Interrupt Request */ -#define ALLOW_CNFG 0x80 /* Allow New Configuration */ -#define DMA_DIR 0x100 /* DMA Direction */ -#define BTE 0x200 /* Bus Timeout Enabled */ - -/* Bit masks for HOST_TIMEOUT */ - -#define COUNT_TIMEOUT 0x7ff /* Host Timeout count */ - /* Bit masks for TIMER_ENABLE1 */ #define TIMEN8 0x1 /* Timer 8 Enable */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF547.h b/arch/blackfin/mach-bf548/include/mach/defBF547.h index e18de212ba1..d55dcc0f532 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF547.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h @@ -581,36 +581,6 @@ #define GU_TRANS 0xff00 /* Transparent Color - G/U Component */ #define BV_TRANS 0xff0000 /* Transparent Color - B/V Component */ -/* Bit masks for HOST_CONTROL */ - -#define HOST_EN 0x1 /* Host Enable */ -#define HOST_END 0x2 /* Host Endianess */ -#define DATA_SIZE 0x4 /* Data Size */ -#define HOST_RST 0x8 /* Host Reset */ -#define HRDY_OVR 0x20 /* Host Ready Override */ -#define INT_MODE 0x40 /* Interrupt Mode */ -#define BT_EN 0x80 /* Bus Timeout Enable */ -#define EHW 0x100 /* Enable Host Write */ -#define EHR 0x200 /* Enable Host Read */ -#define BDR 0x400 /* Burst DMA Requests */ - -/* Bit masks for HOST_STATUS */ - -#define DMA_READY 0x1 /* DMA Ready */ -#define FIFOFULL 0x2 /* FIFO Full */ -#define FIFOEMPTY 0x4 /* FIFO Empty */ -#define DMA_COMPLETE 0x8 /* DMA Complete */ -#define HSHK 0x10 /* Host Handshake */ -#define HSTIMEOUT 0x20 /* Host Timeout */ -#define HIRQ 0x40 /* Host Interrupt Request */ -#define ALLOW_CNFG 0x80 /* Allow New Configuration */ -#define DMA_DIR 0x100 /* DMA Direction */ -#define BTE 0x200 /* Bus Timeout Enabled */ - -/* Bit masks for HOST_TIMEOUT */ - -#define COUNT_TIMEOUT 0x7ff /* Host Timeout count */ - /* Bit masks for KPAD_CTL */ #define KPAD_EN 0x1 /* Keypad Enable */ diff --git a/arch/blackfin/mach-bf561/boards/acvilon.c b/arch/blackfin/mach-bf561/boards/acvilon.c index 0b74218fdd3..430b16d5ccb 100644 --- a/arch/blackfin/mach-bf561/boards/acvilon.c +++ b/arch/blackfin/mach-bf561/boards/acvilon.c @@ -60,7 +60,7 @@ */ const char bfin_board_name[] = "Acvilon board"; -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) #include <linux/usb/isp1760.h> static struct resource bfin_isp1760_resources[] = { [0] = { @@ -137,7 +137,7 @@ static struct i2c_board_info acvilon_i2c_devs[] __initdata = { }, }; -#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE) +#if IS_ENABLED(CONFIG_MTD_PLATRAM) static struct platdata_mtd_ram mtd_ram_data = { .mapname = "rootfs(RAM)", .bankwidth = 4, @@ -160,7 +160,7 @@ static struct platform_device mtd_ram_device = { }; #endif -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#if IS_ENABLED(CONFIG_SMSC911X) #include <linux/smsc911x.h> static struct resource smsc911x_resources[] = { { @@ -194,7 +194,7 @@ static struct platform_device smsc911x_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -246,7 +246,7 @@ static struct platform_device bfin_uart0_device = { #endif #endif -#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM) static struct mtd_partition bfin_plat_nand_partitions[] = { { @@ -323,7 +323,7 @@ static void bfin_plat_nand_init(void) } #endif -#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE) +#if IS_ENABLED(CONFIG_MTD_DATAFLASH) static struct mtd_partition bfin_spi_dataflash_partitions[] = { { .name = "bootloader", @@ -369,7 +369,7 @@ static struct bfin5xx_spi_chip data_flash_chip_info = { }; #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -408,7 +408,7 @@ static struct platform_device bfin_spi0_device = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -416,7 +416,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 3, }, #endif -#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE) +#if IS_ENABLED(CONFIG_MTD_DATAFLASH) { /* DataFlash chip */ .modalias = "mtd_dataflash", .max_speed_hz = 33250000, /* max spi clock (SCK) speed in HZ */ @@ -472,11 +472,11 @@ static struct platform_device bfin_dpmc = { static struct platform_device *acvilon_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -484,17 +484,17 @@ static struct platform_device *acvilon_devices[] __initdata = { &bfin_gpios_device, -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#if IS_ENABLED(CONFIG_SMSC911X) &smsc911x_device, #endif &bfin_i2c_pca_device, -#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM) &bfin_async_nand_device, #endif -#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE) +#if IS_ENABLED(CONFIG_MTD_PLATRAM) &mtd_ram_device, #endif diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index d81450f635d..9f777df4cac 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -13,7 +13,7 @@ #include <linux/mtd/partitions.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> #endif #include <linux/ata_platform.h> @@ -29,10 +29,10 @@ */ const char bfin_board_name[] = "Bluetechnix CM BF561"; -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader(spi)", @@ -64,7 +64,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -77,7 +77,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -85,7 +85,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = 4, }, #endif -#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +#if IS_ENABLED(CONFIG_MMC_SPI) { .modalias = "mmc_spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ @@ -134,14 +134,14 @@ static struct platform_device bfin_spi0_device = { #endif /* spi master and devices */ -#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) +#if IS_ENABLED(CONFIG_FB_HITACHI_TX09) static struct platform_device hitachi_fb_device = { .name = "hitachi-tx09", }; #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -173,7 +173,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#if IS_ENABLED(CONFIG_SMSC911X) #include <linux/smsc911x.h> static struct resource smsc911x_resources[] = { @@ -208,7 +208,7 @@ static struct platform_device smsc911x_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x24000000, @@ -229,7 +229,7 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) static struct resource isp1362_hcd_resources[] = { { .start = 0x24008000, @@ -268,7 +268,7 @@ static struct platform_device isp1362_hcd_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -319,7 +319,7 @@ static struct platform_device bfin_uart0_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -348,7 +348,7 @@ static struct platform_device bfin_sir0_device = { #endif #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) #define PATA_INT IRQ_PF46 static struct pata_platform_info bfin_pata_platform_data = { @@ -385,7 +385,7 @@ static struct platform_device bfin_pata_device = { }; #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition para_partitions[] = { { .name = "bootloader(nor)", @@ -456,54 +456,54 @@ static struct platform_device *cm_bf561_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) +#if IS_ENABLED(CONFIG_FB_HITACHI_TX09) &hitachi_fb_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) &isp1362_hcd_device, #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#if IS_ENABLED(CONFIG_SMSC911X) &smsc911x_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) &bfin_pata_device, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) ¶_flash_device, #endif }; static int __init net2272_init(void) { -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) int ret; ret = gpio_request(GPIO_PF46, "net2272"); @@ -523,11 +523,11 @@ static int __init cm_bf561_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf561_devices, ARRAY_SIZE(cm_bf561_devices)); -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_PATA_PLATFORM) irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN); #endif diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 92938e79b9e..88dee43e7ab 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -25,7 +25,7 @@ */ const char bfin_board_name[] = "ADI BF561-EZKIT"; -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) #include <linux/usb/isp1760.h> static struct resource bfin_isp1760_resources[] = { [0] = { @@ -60,7 +60,7 @@ static struct platform_device bfin_isp1760_device = { }; #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) #include <linux/usb/isp1362.h> static struct resource isp1362_hcd_resources[] = { @@ -101,7 +101,7 @@ static struct platform_device isp1362_hcd_device = { }; #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) static struct resource net2272_bfin_resources[] = { { .start = 0x2C000000, @@ -129,7 +129,7 @@ static struct platform_device net2272_bfin_device = { * USB-LAN EzExtender board * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) #include <linux/smc91x.h> static struct smc91x_platdata smc91x_info = { @@ -163,7 +163,7 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -214,7 +214,7 @@ static struct platform_device bfin_uart0_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -243,7 +243,7 @@ static struct platform_device bfin_sir0_device = { #endif #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition ezkit_partitions[] = { { .name = "bootloader(nor)", @@ -291,7 +291,7 @@ static struct platform_device ezkit_flash_device = { }; #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -330,8 +330,7 @@ static struct platform_device bfin_spi0_device = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ - || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) { .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -341,7 +340,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -351,7 +350,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -375,7 +374,7 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#if IS_ENABLED(CONFIG_I2C_GPIO) #include <linux/i2c-gpio.h> static struct i2c_gpio_platform_data i2c_gpio_data = { @@ -422,8 +421,7 @@ static struct platform_device bfin_dpmc = { }, }; -#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \ - || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) #include <linux/videodev2.h> #include <media/blackfin/bfin_capture.h> #include <media/blackfin/ppi.h> @@ -443,8 +441,7 @@ static const struct ppi_info ppi_info = { .pin_req = ppi_req, }; -#if defined(CONFIG_VIDEO_ADV7183) \ - || defined(CONFIG_VIDEO_ADV7183_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_ADV7183) #include <media/adv7183.h> static struct v4l2_input adv7183_inputs[] = { { @@ -515,7 +512,7 @@ static struct platform_device bfin_capture_device = { }; #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) static struct platform_device bfin_i2s = { .name = "bfin-i2s", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -523,7 +520,7 @@ static struct platform_device bfin_i2s = { }; #endif -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) static struct platform_device bfin_ac97 = { .name = "bfin-ac97", .id = CONFIG_SND_BF5XX_SPORT_NUM, @@ -531,8 +528,7 @@ static struct platform_device bfin_ac97 = { }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \ - || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) static const char * const ad1836_link[] = { "bfin-i2s.0", "spi0.4", @@ -550,72 +546,70 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_dpmc, -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) &smc91x_device, #endif -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) &net2272_bfin_device, #endif -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) &bfin_isp1760_device, #endif -#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_BFIN5XX) &bfin_spi0_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#if IS_ENABLED(CONFIG_I2C_GPIO) &i2c_gpio_device, #endif -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) &isp1362_hcd_device, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &ezkit_flash_device, #endif -#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \ - || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) &bfin_capture_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s, #endif -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) &bfin_ac97, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \ - defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) &bfin_ad1836_machine, #endif }; static int __init net2272_init(void) { -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +#if IS_ENABLED(CONFIG_USB_NET2272) int ret; ret = gpio_request(GPIO_PF11, "net2272"); @@ -641,12 +635,12 @@ static int __init ezkit_init(void) if (ret < 0) return ret; -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +#if IS_ENABLED(CONFIG_SMC91X) bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() | (1 << 12)); SSYNC(); #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() | (1 << 15)); bfin_write_FIO0_FLAG_S(1 << 15); SSYNC(); diff --git a/arch/blackfin/mach-bf561/boards/tepla.c b/arch/blackfin/mach-bf561/boards/tepla.c index 1a57bc986aa..f87b8cc0cd4 100644 --- a/arch/blackfin/mach-bf561/boards/tepla.c +++ b/arch/blackfin/mach-bf561/boards/tepla.c @@ -42,7 +42,7 @@ static struct platform_device smc91x_device = { .resource = smc91x_resources, }; -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -93,7 +93,7 @@ static struct platform_device bfin_uart0_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -125,13 +125,13 @@ static struct platform_device bfin_sir0_device = { static struct platform_device *tepla_devices[] __initdata = { &smc91x_device, -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif diff --git a/arch/blackfin/mach-bf609/boards/ezkit.c b/arch/blackfin/mach-bf609/boards/ezkit.c index 8de8bc690b3..943f7e95ec1 100644 --- a/arch/blackfin/mach-bf609/boards/ezkit.c +++ b/arch/blackfin/mach-bf609/boards/ezkit.c @@ -39,7 +39,7 @@ const char bfin_board_name[] = "ADI BF609-EZKIT"; * Driver needs to know address, irq and flag pin. */ -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) #include <linux/usb/isp1760.h> static struct resource bfin_isp1760_resources[] = { [0] = { @@ -74,7 +74,7 @@ static struct platform_device bfin_isp1760_device = { }; #endif -#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) +#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY) #include <asm/bfin_rotary.h> static struct bfin_rotary_platform_data bfin_rotary_data = { @@ -105,7 +105,7 @@ static struct platform_device bfin_rotary_device = { }; #endif -#if defined(CONFIG_STMMAC_ETH) || defined(CONFIG_STMMAC_ETH_MODULE) +#if IS_ENABLED(CONFIG_STMMAC_ETH) #include <linux/stmmac.h> #include <linux/phy.h> @@ -159,7 +159,7 @@ static struct platform_device bfin_eth_device = { }; #endif -#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE) +#if IS_ENABLED(CONFIG_INPUT_ADXL34X) #include <linux/input/adxl34x.h> static const struct adxl34x_platform_data adxl34x_info = { .x_axis_offset = 0, @@ -198,14 +198,14 @@ static const struct adxl34x_platform_data adxl34x_info = { }; #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 static struct resource bfin_uart0_resources[] = { { @@ -355,7 +355,7 @@ static struct platform_device bfin_uart1_device = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 static struct resource bfin_sir0_resources[] = { { @@ -408,7 +408,7 @@ static struct platform_device bfin_sir1_device = { #endif #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) static struct resource musb_resources[] = { [0] = { .start = 0xFFCC1000, @@ -464,7 +464,7 @@ static struct platform_device musb_device = { }; #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { { @@ -569,7 +569,7 @@ static struct platform_device bfin_sport2_uart_device = { #endif #endif -#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +#if IS_ENABLED(CONFIG_CAN_BFIN) static unsigned short bfin_can0_peripherals[] = { P_CAN0_RX, P_CAN0_TX, 0 @@ -610,7 +610,7 @@ static struct platform_device bfin_can0_device = { #endif -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) static struct mtd_partition partition_info[] = { { .name = "bootloader(nand)", @@ -660,7 +660,7 @@ static struct platform_device bfin_nand_device = { }; #endif -#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SDH_BFIN) static struct bfin_sd_host bfin_sdh_data = { .dma_chan = CH_RSI, @@ -677,7 +677,7 @@ static struct platform_device bfin_sdh_device = { }; #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) static struct mtd_partition ezkit_partitions[] = { { .name = "bootloader(nor)", @@ -741,8 +741,7 @@ static struct platform_device ezkit_flash_device = { }; #endif -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) /* SPI flash chip (w25q32) */ static struct mtd_partition bfin_spi_flash_partitions[] = { { @@ -773,21 +772,20 @@ static struct bfin_spi3_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) static struct bfin_spi3_chip spidev_chip_info = { .enable_dma = true, }; #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) static struct platform_device bfin_i2s_pcm = { .name = "bfin-i2s-pcm-audio", .id = -1, }; #endif -#if defined(CONFIG_SND_BF6XX_SOC_I2S) || \ - defined(CONFIG_SND_BF6XX_SOC_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF6XX_SOC_I2S) #include <asm/bfin_sport3.h> static struct resource bfin_snd_resources[] = { { @@ -841,8 +839,7 @@ static struct platform_device bfin_i2s = { }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \ - || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) static const char * const ad1836_link[] = { "bfin-i2s.0", "spi0.76", @@ -856,14 +853,13 @@ static struct platform_device bfin_ad1836_machine = { }; #endif -#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61) || \ - defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61) static struct platform_device adau1761_device = { .name = "bfin-eval-adau1x61", }; #endif -#if defined(CONFIG_SND_SOC_ADAU1761) || defined(CONFIG_SND_SOC_ADAU1761_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_ADAU1761) #include <sound/adau17x1.h> static struct adau1761_platform_data adau1761_info = { .lineout_mode = ADAU1761_OUTPUT_MODE_LINE, @@ -871,8 +867,7 @@ static struct adau1761_platform_data adau1761_info = { }; #endif -#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \ - || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) #include <linux/videodev2.h> #include <media/blackfin/bfin_capture.h> #include <media/blackfin/ppi.h> @@ -882,7 +877,7 @@ static const unsigned short ppi_req[] = { P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7, P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11, P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15, -#if !defined(CONFIG_VIDEO_VS6624) && !defined(CONFIG_VIDEO_VS6624_MODULE) +#if !IS_ENABLED(CONFIG_VIDEO_VS6624) P_PPI0_D16, P_PPI0_D17, P_PPI0_D18, P_PPI0_D19, P_PPI0_D20, P_PPI0_D21, P_PPI0_D22, P_PPI0_D23, #endif @@ -898,8 +893,7 @@ static const struct ppi_info ppi_info = { .pin_req = ppi_req, }; -#if defined(CONFIG_VIDEO_VS6624) \ - || defined(CONFIG_VIDEO_VS6624_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_VS6624) static struct v4l2_input vs6624_inputs[] = { { .index = 0, @@ -936,8 +930,7 @@ static struct bfin_capture_config bfin_capture_data = { }; #endif -#if defined(CONFIG_VIDEO_ADV7842) \ - || defined(CONFIG_VIDEO_ADV7842_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_ADV7842) #include <media/adv7842.h> static struct v4l2_input adv7842_inputs[] = { @@ -1067,8 +1060,7 @@ static struct platform_device bfin_capture_device = { }; #endif -#if defined(CONFIG_VIDEO_BLACKFIN_DISPLAY) \ - || defined(CONFIG_VIDEO_BLACKFIN_DISPLAY_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_DISPLAY) #include <linux/videodev2.h> #include <media/blackfin/bfin_display.h> #include <media/blackfin/ppi.h> @@ -1090,8 +1082,7 @@ static const struct ppi_info ppi_info = { .pin_req = ppi_req_disp, }; -#if defined(CONFIG_VIDEO_ADV7511) \ - || defined(CONFIG_VIDEO_ADV7511_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_ADV7511) #include <media/adv7511.h> static struct v4l2_output adv7511_outputs[] = { @@ -1313,7 +1304,7 @@ static struct platform_device bfin_crypto_crc_device = { }; #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, .vref_delay_usecs = 50, /* internal, no capacitor */ @@ -1679,7 +1670,7 @@ static struct platform_device bfin_gpg_device = { #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -1702,8 +1693,7 @@ static struct platform_device bfin_device_gpiokeys = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) +#if IS_ENABLED(CONFIG_MTD_M25P80) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ @@ -1715,7 +1705,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877) { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, @@ -1725,7 +1715,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .chip_select = MAX_CTRL_CS + GPIO_PC15, /* SPI_SSEL4 */ }, #endif -#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +#if IS_ENABLED(CONFIG_SPI_SPIDEV) { .modalias = "spidev", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ @@ -1734,7 +1724,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .controller_data = &spidev_chip_info, }, #endif -#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE) +#if IS_ENABLED(CONFIG_INPUT_ADXL34X_SPI) { .modalias = "adxl34x", .platform_data = &adxl34x_info, @@ -1818,7 +1808,7 @@ static struct platform_device bf60x_spi_master1 = { }; #endif /* spi master and devices */ -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0}; static struct resource bfin_twi0_resource[] = { @@ -1871,20 +1861,20 @@ static struct platform_device i2c_bfin_twi1_device = { #endif static struct i2c_board_info __initdata bfin_i2c_board_info0[] = { -#if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE) +#if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C) { I2C_BOARD_INFO("adxl34x", 0x53), .irq = IRQ_PC5, .platform_data = (void *)&adxl34x_info, }, #endif -#if defined(CONFIG_SND_SOC_ADAU1761) || defined(CONFIG_SND_SOC_ADAU1761_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_ADAU1761) { I2C_BOARD_INFO("adau1761", 0x38), .platform_data = (void *)&adau1761_info }, #endif -#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_SSM2602) { I2C_BOARD_INFO("ssm2602", 0x1b), }, @@ -1942,11 +1932,11 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_gpg_device, #endif -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) &rtc_device, #endif -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN) #ifdef CONFIG_SERIAL_BFIN_UART0 &bfin_uart0_device, #endif @@ -1955,7 +1945,7 @@ static struct platform_device *ezkit_devices[] __initdata = { #endif #endif -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#if IS_ENABLED(CONFIG_BFIN_SIR) #ifdef CONFIG_BFIN_SIR0 &bfin_sir0_device, #endif @@ -1964,19 +1954,19 @@ static struct platform_device *ezkit_devices[] __initdata = { #endif #endif -#if defined(CONFIG_STMMAC_ETH) || defined(CONFIG_STMMAC_ETH_MODULE) +#if IS_ENABLED(CONFIG_STMMAC_ETH) &bfin_eth_device, #endif -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) &musb_device, #endif -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) &bfin_isp1760_device, #endif -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, #endif @@ -1988,15 +1978,15 @@ static struct platform_device *ezkit_devices[] __initdata = { #endif #endif -#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) +#if IS_ENABLED(CONFIG_CAN_BFIN) &bfin_can0_device, #endif -#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX) &bfin_nand_device, #endif -#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) +#if IS_ENABLED(CONFIG_SDH_BFIN) &bfin_sdh_device, #endif @@ -2005,11 +1995,11 @@ static struct platform_device *ezkit_devices[] __initdata = { &bf60x_spi_master1, #endif -#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) +#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY) &bfin_rotary_device, #endif -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI) &i2c_bfin_twi0_device, #if !defined(CONFIG_BF542) &i2c_bfin_twi1_device, @@ -2024,34 +2014,29 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_crypto_crc_device, #endif -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) &bfin_device_gpiokeys, #endif -#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +#if IS_ENABLED(CONFIG_MTD_PHYSMAP) &ezkit_flash_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) &bfin_i2s_pcm, #endif -#if defined(CONFIG_SND_BF6XX_SOC_I2S) || \ - defined(CONFIG_SND_BF6XX_SOC_I2S_MODULE) +#if IS_ENABLED(CONFIG_SND_BF6XX_SOC_I2S) &bfin_i2s, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \ - defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) +#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) &bfin_ad1836_machine, #endif -#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61) || \ - defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61_MODULE) +#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61) &adau1761_device, #endif -#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \ - || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) &bfin_capture_device, #endif -#if defined(CONFIG_VIDEO_BLACKFIN_DISPLAY) \ - || defined(CONFIG_VIDEO_BLACKFIN_DISPLAY_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_DISPLAY) &bfin_display_device, #endif @@ -2075,9 +2060,9 @@ static struct pinctrl_map __initdata bfin_pinmux_map[] = { PIN_MAP_MUX_GROUP_DEFAULT("physmap-flash.0", "pinctrl-adi2.0", NULL, "smc0"), PIN_MAP_MUX_GROUP_DEFAULT("bf609_nl8048.2", "pinctrl-adi2.0", NULL, "ppi2_16b"), PIN_MAP_MUX_GROUP_DEFAULT("bfin_display.0", "pinctrl-adi2.0", NULL, "ppi0_16b"), -#if defined(CONFIG_VIDEO_MT9M114) || defined(CONFIG_VIDEO_MT9M114_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_MT9M114) PIN_MAP_MUX_GROUP_DEFAULT("bfin_capture.0", "pinctrl-adi2.0", NULL, "ppi0_8b"), -#elif defined(CONFIG_VIDEO_VS6624) || defined(CONFIG_VIDEO_VS6624_MODULE) +#elif IS_ENABLED(CONFIG_VIDEO_VS6624) PIN_MAP_MUX_GROUP_DEFAULT("bfin_capture.0", "pinctrl-adi2.0", NULL, "ppi0_16b"), #else PIN_MAP_MUX_GROUP_DEFAULT("bfin_capture.0", "pinctrl-adi2.0", NULL, "ppi0_24b"), diff --git a/arch/blackfin/mach-bf609/clock.c b/arch/blackfin/mach-bf609/clock.c index 13644ed2548..56200f37cfc 100644 --- a/arch/blackfin/mach-bf609/clock.c +++ b/arch/blackfin/mach-bf609/clock.c @@ -73,24 +73,6 @@ static void clk_reg_write_mask(u32 reg, uint32_t val, uint32_t mask) bfin_write32(reg, val2); } -static void clk_reg_set_bits(u32 reg, uint32_t mask) -{ - u32 val; - - val = bfin_read32(reg); - val |= mask; - bfin_write32(reg, val); -} - -static void clk_reg_clear_bits(u32 reg, uint32_t mask) -{ - u32 val; - - val = bfin_read32(reg); - val &= ~mask; - bfin_write32(reg, val); -} - int wait_for_pll_align(void) { int i = 10000; diff --git a/arch/blackfin/mach-bf609/pm.c b/arch/blackfin/mach-bf609/pm.c index ad505d9db4a..0cdd6955c7b 100644 --- a/arch/blackfin/mach-bf609/pm.c +++ b/arch/blackfin/mach-bf609/pm.c @@ -210,7 +210,7 @@ void bf609_cpu_pm_enter(suspend_state_t state) #ifdef CONFIG_PM_BFIN_WAKE_PB15 wakeup |= PB15WE; -# if CONFIG_PM_BFIN_WAKE_PA15_POL +# if CONFIG_PM_BFIN_WAKE_PB15_POL wakeup_pol |= PB15WE; # endif #endif |