diff options
47 files changed, 4360 insertions, 1547 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 2f88d8d9770..de325f4615b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -273,7 +273,7 @@ config ARCH_INTEGRATOR select ARM_AMBA select ARCH_HAS_CPUFREQ select COMMON_CLK - select CLK_VERSATILE + select COMMON_CLK_VERSATILE select HAVE_TCM select ICST select GENERIC_CLOCKEVENTS @@ -289,13 +289,12 @@ config ARCH_INTEGRATOR config ARCH_REALVIEW bool "ARM Ltd. RealView family" select ARM_AMBA - select CLKDEV_LOOKUP - select HAVE_MACH_CLKDEV + select COMMON_CLK + select COMMON_CLK_VERSATILE select ICST select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB select PLAT_VERSATILE - select PLAT_VERSATILE_CLOCK select PLAT_VERSATILE_CLCD select ARM_TIMER_SP804 select GPIO_PL061 if GPIOLIB @@ -413,7 +412,7 @@ config ARCH_PRIMA2 select NO_IOPORT select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS - select CLKDEV_LOOKUP + select COMMON_CLK select GENERIC_IRQ_CHIP select MIGHT_HAVE_CACHE_L2X0 select PINCTRL diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig index 7fddd01b85b..d697d07a1bf 100644 --- a/arch/arm/mach-mmp/Kconfig +++ b/arch/arm/mach-mmp/Kconfig @@ -108,18 +108,21 @@ endmenu config CPU_PXA168 bool select CPU_MOHAWK + select COMMON_CLK help Select code specific to PXA168 config CPU_PXA910 bool select CPU_MOHAWK + select COMMON_CLK help Select code specific to PXA910 config CPU_MMP2 bool select CPU_PJ4 + select COMMON_CLK help Select code specific to MMP2. MMP2 is ARMv7 compatible. diff --git a/arch/arm/mach-prima2/Makefile b/arch/arm/mach-prima2/Makefile index 13dd1604d95..841847d5603 100644 --- a/arch/arm/mach-prima2/Makefile +++ b/arch/arm/mach-prima2/Makefile @@ -1,6 +1,5 @@ obj-y := timer.o obj-y += irq.o -obj-y += clock.o obj-y += rstc.o obj-y += prima2.o obj-y += rtciobrg.o diff --git a/arch/arm/mach-prima2/clock.c b/arch/arm/mach-prima2/clock.c deleted file mode 100644 index aebad7e565c..00000000000 --- a/arch/arm/mach-prima2/clock.c +++ /dev/null @@ -1,510 +0,0 @@ -/* - * Clock tree for CSR SiRFprimaII - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - * - * Licensed under GPLv2 or later. - */ - -#include <linux/module.h> -#include <linux/bitops.h> -#include <linux/err.h> -#include <linux/errno.h> -#include <linux/io.h> -#include <linux/clkdev.h> -#include <linux/clk.h> -#include <linux/spinlock.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <asm/mach/map.h> -#include <mach/map.h> - -#define SIRFSOC_CLKC_CLK_EN0 0x0000 -#define SIRFSOC_CLKC_CLK_EN1 0x0004 -#define SIRFSOC_CLKC_REF_CFG 0x0014 -#define SIRFSOC_CLKC_CPU_CFG 0x0018 -#define SIRFSOC_CLKC_MEM_CFG 0x001c -#define SIRFSOC_CLKC_SYS_CFG 0x0020 -#define SIRFSOC_CLKC_IO_CFG 0x0024 -#define SIRFSOC_CLKC_DSP_CFG 0x0028 -#define SIRFSOC_CLKC_GFX_CFG 0x002c -#define SIRFSOC_CLKC_MM_CFG 0x0030 -#define SIRFSOC_LKC_LCD_CFG 0x0034 -#define SIRFSOC_CLKC_MMC_CFG 0x0038 -#define SIRFSOC_CLKC_PLL1_CFG0 0x0040 -#define SIRFSOC_CLKC_PLL2_CFG0 0x0044 -#define SIRFSOC_CLKC_PLL3_CFG0 0x0048 -#define SIRFSOC_CLKC_PLL1_CFG1 0x004c -#define SIRFSOC_CLKC_PLL2_CFG1 0x0050 -#define SIRFSOC_CLKC_PLL3_CFG1 0x0054 -#define SIRFSOC_CLKC_PLL1_CFG2 0x0058 -#define SIRFSOC_CLKC_PLL2_CFG2 0x005c -#define SIRFSOC_CLKC_PLL3_CFG2 0x0060 - -#define SIRFSOC_CLOCK_VA_BASE SIRFSOC_VA(0x005000) - -#define KHZ 1000 -#define MHZ (KHZ * KHZ) - -struct clk_ops { - unsigned long (*get_rate)(struct clk *clk); - long (*round_rate)(struct clk *clk, unsigned long rate); - int (*set_rate)(struct clk *clk, unsigned long rate); - int (*enable)(struct clk *clk); - int (*disable)(struct clk *clk); - struct clk *(*get_parent)(struct clk *clk); - int (*set_parent)(struct clk *clk, struct clk *parent); -}; - -struct clk { - struct clk *parent; /* parent clk */ - unsigned long rate; /* clock rate in Hz */ - signed char usage; /* clock enable count */ - signed char enable_bit; /* enable bit: 0 ~ 63 */ - unsigned short regofs; /* register offset */ - struct clk_ops *ops; /* clock operation */ -}; - -static DEFINE_SPINLOCK(clocks_lock); - -static inline unsigned long clkc_readl(unsigned reg) -{ - return readl(SIRFSOC_CLOCK_VA_BASE + reg); -} - -static inline void clkc_writel(u32 val, unsigned reg) -{ - writel(val, SIRFSOC_CLOCK_VA_BASE + reg); -} - -/* - * osc_rtc - real time oscillator - 32.768KHz - * osc_sys - high speed oscillator - 26MHz - */ - -static struct clk clk_rtc = { - .rate = 32768, -}; - -static struct clk clk_osc = { - .rate = 26 * MHZ, -}; - -/* - * std pll - */ -static unsigned long std_pll_get_rate(struct clk *clk) -{ - unsigned long fin = clk_get_rate(clk->parent); - u32 regcfg2 = clk->regofs + SIRFSOC_CLKC_PLL1_CFG2 - - SIRFSOC_CLKC_PLL1_CFG0; - - if (clkc_readl(regcfg2) & BIT(2)) { - /* pll bypass mode */ - clk->rate = fin; - } else { - /* fout = fin * nf / nr / od */ - u32 cfg0 = clkc_readl(clk->regofs); - u32 nf = (cfg0 & (BIT(13) - 1)) + 1; - u32 nr = ((cfg0 >> 13) & (BIT(6) - 1)) + 1; - u32 od = ((cfg0 >> 19) & (BIT(4) - 1)) + 1; - WARN_ON(fin % MHZ); - clk->rate = fin / MHZ * nf / nr / od * MHZ; - } - - return clk->rate; -} - -static int std_pll_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned long fin, nf, nr, od, reg; - - /* - * fout = fin * nf / (nr * od); - * set od = 1, nr = fin/MHz, so fout = nf * MHz - */ - - nf = rate / MHZ; - if (unlikely((rate % MHZ) || nf > BIT(13) || nf < 1)) - return -EINVAL; - - fin = clk_get_rate(clk->parent); - BUG_ON(fin < MHZ); - - nr = fin / MHZ; - BUG_ON((fin % MHZ) || nr > BIT(6)); - - od = 1; - - reg = (nf - 1) | ((nr - 1) << 13) | ((od - 1) << 19); - clkc_writel(reg, clk->regofs); - - reg = clk->regofs + SIRFSOC_CLKC_PLL1_CFG1 - SIRFSOC_CLKC_PLL1_CFG0; - clkc_writel((nf >> 1) - 1, reg); - - reg = clk->regofs + SIRFSOC_CLKC_PLL1_CFG2 - SIRFSOC_CLKC_PLL1_CFG0; - while (!(clkc_readl(reg) & BIT(6))) - cpu_relax(); - - clk->rate = 0; /* set to zero will force recalculation */ - return 0; -} - -static struct clk_ops std_pll_ops = { - .get_rate = std_pll_get_rate, - .set_rate = std_pll_set_rate, -}; - -static struct clk clk_pll1 = { - .parent = &clk_osc, - .regofs = SIRFSOC_CLKC_PLL1_CFG0, - .ops = &std_pll_ops, -}; - -static struct clk clk_pll2 = { - .parent = &clk_osc, - .regofs = SIRFSOC_CLKC_PLL2_CFG0, - .ops = &std_pll_ops, -}; - -static struct clk clk_pll3 = { - .parent = &clk_osc, - .regofs = SIRFSOC_CLKC_PLL3_CFG0, - .ops = &std_pll_ops, -}; - -/* - * clock domains - cpu, mem, sys/io - */ - -static struct clk clk_mem; - -static struct clk *dmn_get_parent(struct clk *clk) -{ - struct clk *clks[] = { - &clk_osc, &clk_rtc, &clk_pll1, &clk_pll2, &clk_pll3 - }; - u32 cfg = clkc_readl(clk->regofs); - WARN_ON((cfg & (BIT(3) - 1)) > 4); - return clks[cfg & (BIT(3) - 1)]; -} - -static int dmn_set_parent(struct clk *clk, struct clk *parent) -{ - const struct clk *clks[] = { - &clk_osc, &clk_rtc, &clk_pll1, &clk_pll2, &clk_pll3 - }; - u32 cfg = clkc_readl(clk->regofs); - int i; - for (i = 0; i < ARRAY_SIZE(clks); i++) { - if (clks[i] == parent) { - cfg &= ~(BIT(3) - 1); - clkc_writel(cfg | i, clk->regofs); - /* BIT(3) - switching status: 1 - busy, 0 - done */ - while (clkc_readl(clk->regofs) & BIT(3)) - cpu_relax(); - return 0; - } - } - return -EINVAL; -} - -static unsigned long dmn_get_rate(struct clk *clk) -{ - unsigned long fin = clk_get_rate(clk->parent); - u32 cfg = clkc_readl(clk->regofs); - if (cfg & BIT(24)) { - /* fcd bypass mode */ - clk->rate = fin; - } else { - /* - * wait count: bit[19:16], hold count: bit[23:20] - */ - u32 wait = (cfg >> 16) & (BIT(4) - 1); - u32 hold = (cfg >> 20) & (BIT(4) - 1); - - clk->rate = fin / (wait + hold + 2); - } - - return clk->rate; -} - -static int dmn_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned long fin; - unsigned ratio, wait, hold, reg; - unsigned bits = (clk == &clk_mem) ? 3 : 4; - - fin = clk_get_rate(clk->parent); - ratio = fin / rate; - - if (unlikely(ratio < 2 || ratio > BIT(bits + 1))) - return -EINVAL; - - WARN_ON(fin % rate); - - wait = (ratio >> 1) - 1; - hold = ratio - wait - 2; - - reg = clkc_readl(clk->regofs); - reg &= ~(((BIT(bits) - 1) << 16) | ((BIT(bits) - 1) << 20)); - reg |= (wait << 16) | (hold << 20) | BIT(25); - clkc_writel(reg, clk->regofs); - - /* waiting FCD been effective */ - while (clkc_readl(clk->regofs) & BIT(25)) - cpu_relax(); - - clk->rate = 0; /* set to zero will force recalculation */ - - return 0; -} - -/* - * cpu clock has no FCD register in Prima2, can only change pll - */ -static int cpu_set_rate(struct clk *clk, unsigned long rate) -{ - int ret1, ret2; - struct clk *cur_parent, *tmp_parent; - - cur_parent = dmn_get_parent(clk); - BUG_ON(cur_parent == NULL || cur_parent->usage > 1); - - /* switch to tmp pll before setting parent clock's rate */ - tmp_parent = cur_parent == &clk_pll1 ? &clk_pll2 : &clk_pll1; - ret1 = dmn_set_parent(clk, tmp_parent); - BUG_ON(ret1); - - ret2 = clk_set_rate(cur_parent, rate); - - ret1 = dmn_set_parent(clk, cur_parent); - - clk->rate = 0; /* set to zero will force recalculation */ - - return ret2 ? ret2 : ret1; -} - -static struct clk_ops cpu_ops = { - .get_parent = dmn_get_parent, - .set_parent = dmn_set_parent, - .set_rate = cpu_set_rate, -}; - -static struct clk clk_cpu = { - .parent = &clk_pll1, - .regofs = SIRFSOC_CLKC_CPU_CFG, - .ops = &cpu_ops, -}; - - -static struct clk_ops msi_ops = { - .set_rate = dmn_set_rate, - .get_rate = dmn_get_rate, - .set_parent = dmn_set_parent, - .get_parent = dmn_get_parent, -}; - -static struct clk clk_mem = { - .parent = &clk_pll2, - .regofs = SIRFSOC_CLKC_MEM_CFG, - .ops = &msi_ops, -}; - -static struct clk clk_sys = { - .parent = &clk_pll3, - .regofs = SIRFSOC_CLKC_SYS_CFG, - .ops = &msi_ops, -}; - -static struct clk clk_io = { - .parent = &clk_pll3, - .regofs = SIRFSOC_CLKC_IO_CFG, - .ops = &msi_ops, -}; - -/* - * on-chip clock sets - */ -static struct clk_lookup onchip_clks[] = { - { - .dev_id = "rtc", - .clk = &clk_rtc, - }, { - .dev_id = "osc", - .clk = &clk_osc, - }, { - .dev_id = "pll1", - .clk = &clk_pll1, - }, { - .dev_id = "pll2", - .clk = &clk_pll2, - }, { - .dev_id = "pll3", - .clk = &clk_pll3, - }, { - .dev_id = "cpu", - .clk = &clk_cpu, - }, { - .dev_id = "mem", - .clk = &clk_mem, - }, { - .dev_id = "sys", - .clk = &clk_sys, - }, { - .dev_id = "io", - .clk = &clk_io, - }, -}; - -int clk_enable(struct clk *clk) -{ - unsigned long flags; - - if (unlikely(IS_ERR_OR_NULL(clk))) - return -EINVAL; - - if (clk->parent) - clk_enable(clk->parent); - - spin_lock_irqsave(&clocks_lock, flags); - if (!clk->usage++ && clk->ops && clk->ops->enable) - clk->ops->enable(clk); - spin_unlock_irqrestore(&clocks_lock, flags); - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ - unsigned long flags; - - if (unlikely(IS_ERR_OR_NULL(clk))) - return; - - WARN_ON(!clk->usage); - - spin_lock_irqsave(&clocks_lock, flags); - if (--clk->usage == 0 && clk->ops && clk->ops->disable) - clk->ops->disable(clk); - spin_unlock_irqrestore(&clocks_lock, flags); - - if (clk->parent) - clk_disable(clk->parent); -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - if (unlikely(IS_ERR_OR_NULL(clk))) - return 0; - - if (clk->rate) - return clk->rate; - - if (clk->ops && clk->ops->get_rate) - return clk->ops->get_rate(clk); - - return clk_get_rate(clk->parent); -} -EXPORT_SYMBOL(clk_get_rate); - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - if (unlikely(IS_ERR_OR_NULL(clk))) - return 0; - - if (clk->ops && clk->ops->round_rate) - return clk->ops->round_rate(clk, rate); - - return 0; -} -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - if (unlikely(IS_ERR_OR_NULL(clk))) - return -EINVAL; - - if (!clk->ops || !clk->ops->set_rate) - return -EINVAL; - - return clk->ops->set_rate(clk, rate); -} -EXPORT_SYMBOL(clk_set_rate); - -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - int ret; - unsigned long flags; - - if (unlikely(IS_ERR_OR_NULL(clk))) - return -EINVAL; - - if (!clk->ops || !clk->ops->set_parent) - return -EINVAL; - - spin_lock_irqsave(&clocks_lock, flags); - ret = clk->ops->set_parent(clk, parent); - if (!ret) { - parent->usage += clk->usage; - clk->parent->usage -= clk->usage; - BUG_ON(clk->parent->usage < 0); - clk->parent = parent; - } - spin_unlock_irqrestore(&clocks_lock, flags); - return ret; -} -EXPORT_SYMBOL(clk_set_parent); - -struct clk *clk_get_parent(struct clk *clk) -{ - unsigned long flags; - - if (unlikely(IS_ERR_OR_NULL(clk))) - return NULL; - - if (!clk->ops || !clk->ops->get_parent) - return clk->parent; - - spin_lock_irqsave(&clocks_lock, flags); - clk->parent = clk->ops->get_parent(clk); - spin_unlock_irqrestore(&clocks_lock, flags); - return clk->parent; -} -EXPORT_SYMBOL(clk_get_parent); - -static void __init sirfsoc_clk_init(void) -{ - clkdev_add_table(onchip_clks, ARRAY_SIZE(onchip_clks)); -} - -static struct of_device_id clkc_ids[] = { - { .compatible = "sirf,prima2-clkc" }, - {}, -}; - -void __init sirfsoc_of_clk_init(void) -{ - struct device_node *np; - struct resource res; - struct map_desc sirfsoc_clkc_iodesc = { - .virtual = SIRFSOC_CLOCK_VA_BASE, - .type = MT_DEVICE, - }; - - np = of_find_matching_node(NULL, clkc_ids); - if (!np) - panic("unable to find compatible clkc node in dtb\n"); - - if (of_address_to_resource(np, 0, &res)) - panic("unable to find clkc range in dtb"); - of_node_put(np); - - sirfsoc_clkc_iodesc.pfn = __phys_to_pfn(res.start); - sirfsoc_clkc_iodesc.length = 1 + res.end - res.start; - - iotable_init(&sirfsoc_clkc_iodesc, 1); - - sirfsoc_clk_init(); -} diff --git a/arch/arm/mach-prima2/prima2.c b/arch/arm/mach-prima2/prima2.c index 8f0429d4b79..e9a17aebe0d 100644 --- a/arch/arm/mach-prima2/prima2.c +++ b/arch/arm/mach-prima2/prima2.c @@ -38,7 +38,6 @@ static const char *prima2cb_dt_match[] __initdata = { MACHINE_START(PRIMA2_EVB, "prima2cb") /* Maintainer: Barry Song <baohua.song@csr.com> */ .atag_offset = 0x100, - .init_early = sirfsoc_of_clk_init, .map_io = sirfsoc_map_lluart, .init_irq = sirfsoc_of_irq_init, .timer = &sirfsoc_timer, diff --git a/arch/arm/mach-prima2/timer.c b/arch/arm/mach-prima2/timer.c index f224107de7b..d95bf252f69 100644 --- a/arch/arm/mach-prima2/timer.c +++ b/arch/arm/mach-prima2/timer.c @@ -21,6 +21,8 @@ #include <asm/sched_clock.h> #include <asm/mach/time.h> +#include "common.h" + #define SIRFSOC_TIMER_COUNTER_LO 0x0000 #define SIRFSOC_TIMER_COUNTER_HI 0x0004 #define SIRFSOC_TIMER_MATCH_0 0x0008 @@ -188,9 +190,13 @@ static void __init sirfsoc_clockevent_init(void) static void __init sirfsoc_timer_init(void) { unsigned long rate; + struct clk *clk; + + /* initialize clocking early, we want to set the OS timer */ + sirfsoc_of_clk_init(); /* timer's input clock is io clock */ - struct clk *clk = clk_get_sys("io", NULL); + clk = clk_get_sys("io", NULL); BUG_ON(IS_ERR(clk)); diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 45868bb43cb..ff007d15e0e 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -30,7 +30,6 @@ #include <linux/ata_platform.h> #include <linux/amba/mmci.h> #include <linux/gfp.h> -#include <linux/clkdev.h> #include <linux/mtd/physmap.h> #include <mach/hardware.h> @@ -226,115 +225,10 @@ struct mmci_platform_data realview_mmc1_plat_data = { .cd_invert = true, }; -/* - * Clock handling - */ -static const struct icst_params realview_oscvco_params = { - .ref = 24000000, - .vco_max = ICST307_VCO_MAX, - .vco_min = ICST307_VCO_MIN, - .vd_min = 4 + 8, - .vd_max = 511 + 8, - .rd_min = 1 + 2, - .rd_max = 127 + 2, - .s2div = icst307_s2div, - .idx2s = icst307_idx2s, -}; - -static void realview_oscvco_set(struct clk *clk, struct icst_vco vco) -{ - void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET; - u32 val; - - val = readl(clk->vcoreg) & ~0x7ffff; - val |= vco.v | (vco.r << 9) | (vco.s << 16); - - writel(0xa05f, sys_lock); - writel(val, clk->vcoreg); - writel(0, sys_lock); -} - -static const struct clk_ops oscvco_clk_ops = { - .round = icst_clk_round, - .set = icst_clk_set, - .setvco = realview_oscvco_set, -}; - -static struct clk oscvco_clk = { - .ops = &oscvco_clk_ops, - .params = &realview_oscvco_params, -}; - -/* - * These are fixed clocks. - */ -static struct clk ref24_clk = { - .rate = 24000000, -}; - -static struct clk sp804_clk = { - .rate = 1000000, -}; - -static struct clk dummy_apb_pclk; - -static struct clk_lookup lookups[] = { - { /* Bus clock */ - .con_id = "apb_pclk", - .clk = &dummy_apb_pclk, - }, { /* UART0 */ - .dev_id = "dev:uart0", - .clk = &ref24_clk, - }, { /* UART1 */ - .dev_id = "dev:uart1", - .clk = &ref24_clk, - }, { /* UART2 */ - .dev_id = "dev:uart2", - .clk = &ref24_clk, - }, { /* UART3 */ - .dev_id = "fpga:uart3", - .clk = &ref24_clk, - }, { /* UART3 is on the dev chip in PB1176 */ - .dev_id = "dev:uart3", - .clk = &ref24_clk, - }, { /* UART4 only exists in PB1176 */ - .dev_id = "fpga:uart4", - .clk = &ref24_clk, - }, { /* KMI0 */ - .dev_id = "fpga:kmi0", - .clk = &ref24_clk, - }, { /* KMI1 */ - .dev_id = "fpga:kmi1", - .clk = &ref24_clk, - }, { /* MMC0 */ - .dev_id = "fpga:mmc0", - .clk = &ref24_clk, - }, { /* CLCD is in the PB1176 and EB DevChip */ - .dev_id = "dev:clcd", - .clk = &oscvco_clk, - }, { /* PB:CLCD */ - .dev_id = "issp:clcd", - .clk = &oscvco_clk, - }, { /* SSP */ - .dev_id = "dev:ssp0", - .clk = &ref24_clk, - }, { /* SP804 timers */ - .dev_id = "sp804", - .clk = &sp804_clk, - }, -}; - void __init realview_init_early(void) { void __iomem *sys = __io_address(REALVIEW_SYS_BASE); - if (machine_is_realview_pb1176()) - oscvco_clk.vcoreg = sys + REALVIEW_SYS_OSC0_OFFSET; - else - oscvco_clk.vcoreg = sys + REALVIEW_SYS_OSC4_OFFSET; - - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - versatile_sched_clock_init(sys + REALVIEW_SYS_24MHz_OFFSET, 24000000); } diff --git a/arch/arm/mach-realview/include/mach/clkdev.h b/arch/arm/mach-realview/include/mach/clkdev.h deleted file mode 100644 index e58d0771b64..00000000000 --- a/arch/arm/mach-realview/include/mach/clkdev.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef __ASM_MACH_CLKDEV_H -#define __ASM_MACH_CLKDEV_H - -#include <plat/clock.h> - -struct clk { - unsigned long rate; - const struct clk_ops *ops; - const struct icst_params *params; - void __iomem *vcoreg; -}; - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do { } while (0) - -#endif diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index baf382c5e77..a33e33b7673 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -27,6 +27,7 @@ #include <linux/amba/mmci.h> #include <linux/amba/pl022.h> #include <linux/io.h> +#include <linux/platform_data/clk-realview.h> #include <mach/hardware.h> #include <asm/irq.h> @@ -414,6 +415,7 @@ static void __init realview_eb_timer_init(void) else timer_irq = IRQ_EB_TIMER0_1; + realview_clk_init(__io_address(REALVIEW_SYS_BASE), false); realview_timer_init(timer_irq); realview_eb_twd_init(); } diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index b1d7cafa1a6..f0298cbc203 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -29,6 +29,7 @@ #include <linux/mtd/physmap.h> #include <linux/mtd/partitions.h> #include <linux/io.h> +#include <linux/platform_data/clk-realview.h> #include <mach/hardware.h> #include <asm/irq.h> @@ -326,6 +327,7 @@ static void __init realview_pb1176_timer_init(void) timer2_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE); timer3_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE) + 0x20; + realview_clk_init(__io_address(REALVIEW_SYS_BASE), true); realview_timer_init(IRQ_DC1176_TIMER0); } diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index a98c536e332..1f019f76f7b 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -27,6 +27,7 @@ #include <linux/amba/mmci.h> #include <linux/amba/pl022.h> #include <linux/io.h> +#include <linux/platform_data/clk-realview.h> #include <mach/hardware.h> #include <asm/irq.h> @@ -312,6 +313,7 @@ static void __init realview_pb11mp_timer_init(void) timer2_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE); timer3_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE) + 0x20; + realview_clk_init(__io_address(REALVIEW_SYS_BASE), false); realview_timer_init(IRQ_TC11MP_TIMER0_1); realview_pb11mp_twd_init(); } diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index 59650174e6e..5032775dbfe 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -27,6 +27,7 @@ #include <linux/amba/mmci.h> #include <linux/amba/pl022.h> #include <linux/io.h> +#include <linux/platform_data/clk-realview.h> #include <asm/irq.h> #include <asm/leds.h> @@ -261,6 +262,7 @@ static void __init realview_pba8_timer_init(void) timer2_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE); timer3_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE) + 0x20; + realview_clk_init(__io_address(REALVIEW_SYS_BASE), false); realview_timer_init(IRQ_PBA8_TIMER0_1); } diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index 3f2f605624e..de64ba0ddb9 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -26,6 +26,7 @@ #include <linux/amba/mmci.h> #include <linux/amba/pl022.h> #include <linux/io.h> +#include <linux/platform_data/clk-realview.h> #include <asm/irq.h> #include <asm/leds.h> @@ -320,6 +321,7 @@ static void __init realview_pbx_timer_init(void) timer2_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE); timer3_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE) + 0x20; + realview_clk_init(__io_address(REALVIEW_SYS_BASE), false); realview_timer_init(IRQ_PBX_TIMER0_1); realview_pbx_twd_init(); } diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 53d3d46dec1..a258996d954 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -11,6 +11,7 @@ config UX500_SOC_COMMON select CACHE_L2X0 select PINCTRL select PINCTRL_NOMADIK + select COMMON_CLK config UX500_SOC_DB8500 bool diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index 026086ff9e6..5691ef679d0 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel, U8500 machine. # -obj-y := clock.o cpu.o devices.o devices-common.o \ +obj-y := cpu.o devices.o devices-common.o \ id.o usb.o timer.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c deleted file mode 100644 index 8d73b066a18..00000000000 --- a/arch/arm/mach-ux500/clock.c +++ /dev/null @@ -1,715 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson - * Copyright (C) 2009 STMicroelectronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/clkdev.h> -#include <linux/cpufreq.h> - -#include <plat/mtu.h> -#include <mach/hardware.h> -#include "clock.h" - -#ifdef CONFIG_DEBUG_FS -#include <linux/debugfs.h> -#include <linux/uaccess.h> /* for copy_from_user */ -static LIST_HEAD(clk_list); -#endif - -#define PRCC_PCKEN 0x00 -#define PRCC_PCKDIS 0x04 -#define PRCC_KCKEN 0x08 -#define PRCC_KCKDIS 0x0C - -#define PRCM_YYCLKEN0_MGT_SET 0x510 -#define PRCM_YYCLKEN1_MGT_SET 0x514 -#define PRCM_YYCLKEN0_MGT_CLR 0x518 -#define PRCM_YYCLKEN1_MGT_CLR 0x51C -#define PRCM_YYCLKEN0_MGT_VAL 0x520 -#define PRCM_YYCLKEN1_MGT_VAL 0x524 - -#define PRCM_SVAMMDSPCLK_MGT 0x008 -#define PRCM_SIAMMDSPCLK_MGT 0x00C -#define PRCM_SGACLK_MGT 0x014 -#define PRCM_UARTCLK_MGT 0x018 -#define PRCM_MSP02CLK_MGT 0x01C -#define PRCM_MSP1CLK_MGT 0x288 -#define PRCM_I2CCLK_MGT 0x020 -#define PRCM_SDMMCCLK_MGT 0x024 -#define PRCM_SLIMCLK_MGT 0x028 -#define PRCM_PER1CLK_MGT 0x02C -#define PRCM_PER2CLK_MGT 0x030 -#define PRCM_PER3CLK_MGT 0x034 -#define PRCM_PER5CLK_MGT 0x038 -#define PRCM_PER6CLK_MGT 0x03C -#define PRCM_PER7CLK_MGT 0x040 -#define PRCM_LCDCLK_MGT 0x044 -#define PRCM_BMLCLK_MGT 0x04C -#define PRCM_HSITXCLK_MGT 0x050 -#define PRCM_HSIRXCLK_MGT 0x054 -#define PRCM_HDMICLK_MGT 0x058 -#define PRCM_APEATCLK_MGT 0x05C -#define PRCM_APETRACECLK_MGT 0x060 -#define PRCM_MCDECLK_MGT 0x064 -#define PRCM_IPI2CCLK_MGT 0x068 -#define PRCM_DSIALTCLK_MGT 0x06C -#define PRCM_DMACLK_MGT 0x074 -#define PRCM_B2R2CLK_MGT 0x078 -#define PRCM_TVCLK_MGT 0x07C -#define PRCM_TCR 0x1C8 -#define PRCM_TCR_STOPPED (1 << 16) -#define PRCM_TCR_DOZE_MODE (1 << 17) -#define PRCM_UNIPROCLK_MGT 0x278 -#define PRCM_SSPCLK_MGT 0x280 -#define PRCM_RNGCLK_MGT 0x284 -#define PRCM_UICCCLK_MGT 0x27C - -#define PRCM_MGT_ENABLE (1 << 8) - -static DEFINE_SPINLOCK(clocks_lock); - -static void __clk_enable(struct clk *clk) -{ - if (clk->enabled++ == 0) { - if (clk->parent_cluster) - __clk_enable(clk->parent_cluster); - - if (clk->parent_periph) - __clk_enable(clk->parent_periph); - - if (clk->ops && clk->ops->enable) - clk->ops->enable(clk); - } -} - -int clk_enable(struct clk *clk) -{ - unsigned long flags; - - spin_lock_irqsave(&clocks_lock, flags); - __clk_enable(clk); - spin_unlock_irqrestore(&clocks_lock, flags); - - return 0; -} -EXPORT_SYMBOL(clk_enable); - -static void __clk_disable(struct clk *clk) -{ - if (--clk->enabled == 0) { - if (clk->ops && clk->ops->disable) - clk->ops->disable(clk); - - if (clk->parent_periph) - __clk_disable(clk->parent_periph); - - if (clk->parent_cluster) - __clk_disable(clk->parent_cluster); - } -} - -void clk_disable(struct clk *clk) -{ - unsigned long flags; - - WARN_ON(!clk->enabled); - - spin_lock_irqsave(&clocks_lock, flags); - __clk_disable(clk); - spin_unlock_irqrestore(&clocks_lock, flags); -} -EXPORT_SYMBOL(clk_disable); - -/* - * The MTU has a separate, rather complex muxing setup - * with alternative parents (peripheral cluster or - * ULP or fixed 32768 Hz) depending on settings - */ -static unsigned long clk_mtu_get_rate(struct clk *clk) -{ - void __iomem *addr; - u32 tcr; - int mtu = (int) clk->data; - /* - * One of these is selected eventually - * TODO: Replace the constant with a reference - * to the ULP source once this is modeled. - */ - unsigned long clk32k = 32768; - unsigned long mturate; - unsigned long retclk; - - if (cpu_is_u8500_family()) - addr = __io_address(U8500_PRCMU_BASE); - else - ux500_unknown_soc(); - - /* - * On a startup, always conifgure the TCR to the doze mode; - * bootloaders do it for us. Do this in the kernel too. - */ - writel(PRCM_TCR_DOZE_MODE, addr + PRCM_TCR); - - tcr = readl(addr + PRCM_TCR); - - /* Get the rate from the parent as a default */ - if (clk->parent_periph) - mturate = clk_get_rate(clk->parent_periph); - else if (clk->parent_cluster) - mturate = clk_get_rate(clk->parent_cluster); - else - /* We need to be connected SOMEWHERE */ - BUG(); - - /* Return the clock selected for this MTU */ - if (tcr & (1 << mtu)) - retclk = clk32k; - else - retclk = mturate; - - pr_info("MTU%d clock rate: %lu Hz\n", mtu, retclk); - return retclk; -} - -unsigned long clk_get_rate(struct clk *clk) -{ - unsigned long rate; - - /* - * If there is a custom getrate callback for this clock, - * it will take precedence. - */ - if (clk->get_rate) - return clk->get_rate(clk); - - if (clk->ops && clk->ops->get_rate) - return clk->ops->get_rate(clk); - - rate = clk->rate; - if (!rate) { - if (clk->parent_periph) - rate = clk_get_rate(clk->parent_periph); - else if (clk->parent_cluster) - rate = clk_get_rate(clk->parent_cluster); - } - - return rate; -} -EXPORT_SYMBOL(clk_get_rate); - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - /*TODO*/ - return rate; -} -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - clk->rate = rate; - return 0; -} -EXPORT_SYMBOL(clk_set_rate); - -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - /*TODO*/ - return -ENOSYS; -} -EXPORT_SYMBOL(clk_set_parent); - -static void clk_prcmu_enable(struct clk *clk) -{ - void __iomem *cg_set_reg = __io_address(U8500_PRCMU_BASE) - + PRCM_YYCLKEN0_MGT_SET + clk->prcmu_cg_off; - - writel(1 << clk->prcmu_cg_bit, cg_set_reg); -} - -static void clk_prcmu_disable(struct clk *clk) -{ - void __iomem *cg_clr_reg = __io_address(U8500_PRCMU_BASE) - + PRCM_YYCLKEN0_MGT_CLR + clk->prcmu_cg_off; - - writel(1 << clk->prcmu_cg_bit, cg_clr_reg); -} - -static struct clkops clk_prcmu_ops = { - .enable = clk_prcmu_enable, - .disable = clk_prcmu_disable, -}; - -static unsigned int clkrst_base[] = { - [1] = U8500_CLKRST1_BASE, - [2] = U8500_CLKRST2_BASE, - [3] = U8500_CLKRST3_BASE, - [5] = U8500_CLKRST5_BASE, - [6] = U8500_CLKRST6_BASE, -}; - -static void clk_prcc_enable(struct clk *clk) -{ - void __iomem *addr = __io_address(clkrst_base[clk->cluster]); - - if (clk->prcc_kernel != -1) - writel(1 << clk->prcc_kernel, addr + PRCC_KCKEN); - - if (clk->prcc_bus != -1) - writel(1 << clk->prcc_bus, addr + PRCC_PCKEN); -} - -static void clk_prcc_disable(struct clk *clk) -{ - void __iomem *addr = __io_address(clkrst_base[clk->cluster]); - - if (clk->prcc_bus != -1) - writel(1 << clk->prcc_bus, addr + PRCC_PCKDIS); - - if (clk->prcc_kernel != -1) - writel(1 << clk->prcc_kernel, addr + PRCC_KCKDIS); -} - -static struct clkops clk_prcc_ops = { - .enable = clk_prcc_enable, - .disable = clk_prcc_disable, -}; - -static struct clk clk_32khz = { - .name = "clk_32khz", - .rate = 32000, -}; - -/* - * PRCMU level clock gating - */ - -/* Bank 0 */ -static DEFINE_PRCMU_CLK(svaclk, 0x0, 2, SVAMMDSPCLK); -static DEFINE_PRCMU_CLK(siaclk, 0x0, 3, SIAMMDSPCLK); -static DEFINE_PRCMU_CLK(sgaclk, 0x0, 4, SGACLK); -static DEFINE_PRCMU_CLK_RATE(uartclk, 0x0, 5, UARTCLK, 38400000); -static DEFINE_PRCMU_CLK(msp02clk, 0x0, 6, MSP02CLK); -static DEFINE_PRCMU_CLK(msp1clk, 0x0, 7, MSP1CLK); /* v1 */ -static DEFINE_PRCMU_CLK_RATE(i2cclk, 0x0, 8, I2CCLK, 48000000); -static DEFINE_PRCMU_CLK_RATE(sdmmcclk, 0x0, 9, SDMMCCLK, 100000000); -static DEFINE_PRCMU_CLK(slimclk, 0x0, 10, SLIMCLK); -static DEFINE_PRCMU_CLK(per1clk, 0x0, 11, PER1CLK); -static DEFINE_PRCMU_CLK(per2clk, 0x0, 12, PER2CLK); -static DEFINE_PRCMU_CLK(per3clk, 0x0, 13, PER3CLK); -static DEFINE_PRCMU_CLK(per5clk, 0x0, 14, PER5CLK); -static DEFINE_PRCMU_CLK_RATE(per6clk, 0x0, 15, PER6CLK, 133330000); -static DEFINE_PRCMU_CLK(lcdclk, 0x0, 17, LCDCLK); -static DEFINE_PRCMU_CLK(bmlclk, 0x0, 18, BMLCLK); -static DEFINE_PRCMU_CLK(hsitxclk, 0x0, 19, HSITXCLK); -static DEFINE_PRCMU_CLK(hsirxclk, 0x0, 20, HSIRXCLK); -static DEFINE_PRCMU_CLK(hdmiclk, 0x0, 21, HDMICLK); -static DEFINE_PRCMU_CLK(apeatclk, 0x0, 22, APEATCLK); -static DEFINE_PRCMU_CLK(apetraceclk, 0x0, 23, APETRACECLK); -static DEFINE_PRCMU_CLK(mcdeclk, 0x0, 24, MCDECLK); -static DEFINE_PRCMU_CLK(ipi2clk, 0x0, 25, IPI2CCLK); -static DEFINE_PRCMU_CLK(dsialtclk, 0x0, 26, DSIALTCLK); /* v1 */ -static DEFINE_PRCMU_CLK(dmaclk, 0x0, 27, DMACLK); -static DEFINE_PRCMU_CLK(b2r2clk, 0x0, 28, B2R2CLK); -static DEFINE_PRCMU_CLK(tvclk, 0x0, 29, TVCLK); -static DEFINE_PRCMU_CLK(uniproclk, 0x0, 30, UNIPROCLK); /* v1 */ -static DEFINE_PRCMU_CLK_RATE(sspclk, 0x0, 31, SSPCLK, 48000000); /* v1 */ - -/* Bank 1 */ -static DEFINE_PRCMU_CLK(rngclk, 0x4, 0, RNGCLK); /* v1 */ -static DEFINE_PRCMU_CLK(uiccclk, 0x4, 1, UICCCLK); /* v1 */ - -/* - * PRCC level clock gating - * Format: per#, clk, PCKEN bit, KCKEN bit, parent - */ - -/* Peripheral Cluster #1 */ -static DEFINE_PRCC_CLK(1, msp3, 11, 10, &clk_msp1clk); -static DEFINE_PRCC_CLK(1, i2c4, 10, 9, &clk_i2cclk); -static DEFINE_PRCC_CLK(1, gpio0, 9, -1, NULL); -static DEFINE_PRCC_CLK(1, slimbus0, 8, 8, &clk_slimclk); -static DEFINE_PRCC_CLK(1, spi3, 7, -1, NULL); -static DEFINE_PRCC_CLK(1, i2c2, 6, 6, &clk_i2cclk); -static DEFINE_PRCC_CLK(1, sdi0, 5, 5, &clk_sdmmcclk); -static DEFINE_PRCC_CLK(1, msp1, 4, 4, &clk_msp1clk); -static DEFINE_PRCC_CLK(1, msp0, 3, 3, &clk_msp02clk); -static DEFINE_PRCC_CLK(1, i2c1, 2, 2, &clk_i2cclk); -static DEFINE_PRCC_CLK(1, uart1, 1, 1, &clk_uartclk); -static DEFINE_PRCC_CLK(1, uart0, 0, 0, &clk_uartclk); - -/* Peripheral Cluster #2 */ -static DEFINE_PRCC_CLK(2, gpio1, 11, -1, NULL); -static DEFINE_PRCC_CLK(2, ssitx, 10, 7, NULL); -static DEFINE_PRCC_CLK(2, ssirx, 9, 6, NULL); -static DEFINE_PRCC_CLK(2, spi0, 8, -1, NULL); -static DEFINE_PRCC_CLK(2, sdi3, 7, 5, &clk_sdmmcclk); -static DEFINE_PRCC_CLK(2, sdi1, 6, 4, &clk_sdmmcclk); -static DEFINE_PRCC_CLK(2, msp2, 5, 3, &clk_msp02clk); -static DEFINE_PRCC_CLK(2, sdi4, 4, 2, &clk_sdmmcclk); -static DEFINE_PRCC_CLK(2, pwl, 3, 1, NULL); -static DEFINE_PRCC_CLK(2, spi1, 2, -1, NULL); -static DEFINE_PRCC_CLK(2, spi2, 1, -1, NULL); -static DEFINE_PRCC_CLK(2, i2c3, 0, 0, &clk_i2cclk); - -/* Peripheral Cluster #3 */ -static DEFINE_PRCC_CLK(3, gpio2, 8, -1, NULL); -static DEFINE_PRCC_CLK(3, sdi5, 7, 7, &clk_sdmmcclk); -static DEFINE_PRCC_CLK(3, uart2, 6, 6, &clk_uartclk); -static DEFINE_PRCC_CLK(3, ske, 5, 5, &clk_32khz); -static DEFINE_PRCC_CLK(3, sdi2, 4, 4, &clk_sdmmcclk); -static DEFINE_PRCC_CLK(3, i2c0, 3, 3, &clk_i2cclk); -static DEFINE_PRCC_CLK(3, ssp1, 2, 2, &clk_sspclk); -static DEFINE_PRCC_CLK(3, ssp0, 1, 1, &clk_sspclk); -static DEFINE_PRCC_CLK(3, fsmc, 0, -1, NULL); - -/* Peripheral Cluster #4 is in the always on domain */ - -/* Peripheral Cluster #5 */ -static DEFINE_PRCC_CLK(5, gpio3, 1, -1, NULL); -static DEFINE_PRCC_CLK(5, usb, 0, 0, NULL); - -/* Peripheral Cluster #6 */ - -/* MTU ID in data */ -static DEFINE_PRCC_CLK_CUSTOM(6, mtu1, 9, -1, NULL, clk_mtu_get_rate, 1); -static DEFINE_PRCC_CLK_CUSTOM(6, mtu0, 8, -1, NULL, clk_mtu_get_rate, 0); -static DEFINE_PRCC_CLK(6, cfgreg, 7, 7, NULL); -static DEFINE_PRCC_CLK(6, hash1, 6, -1, NULL); -static DEFINE_PRCC_CLK(6, unipro, 5, 1, &clk_uniproclk); -static DEFINE_PRCC_CLK(6, pka, 4, -1, NULL); -static DEFINE_PRCC_CLK(6, hash0, 3, -1, NULL); -static DEFINE_PRCC_CLK(6, cryp0, 2, -1, NULL); -static DEFINE_PRCC_CLK(6, cryp1, 1, -1, NULL); -static DEFINE_PRCC_CLK(6, rng, 0, 0, &clk_rngclk); - -static struct clk clk_dummy_apb_pclk = { - .name = "apb_pclk", -}; - -static struct clk_lookup u8500_clks[] = { - CLK(dummy_apb_pclk, NULL, "apb_pclk"), - - /* Peripheral Cluster #1 */ - CLK(gpio0, "gpio.0", NULL), - CLK(gpio0, "gpio.1", NULL), - CLK(slimbus0, "slimbus0", NULL), - CLK(i2c2, "nmk-i2c.2", NULL), - CLK(sdi0, "sdi0", NULL), - CLK(msp0, "ux500-msp-i2s.0", NULL), - CLK(i2c1, "nmk-i2c.1", NULL), - CLK(uart1, "uart1", NULL), - CLK(uart0, "uart0", NULL), - - /* Peripheral Cluster #3 */ - CLK(gpio2, "gpio.2", NULL), - CLK(gpio2, "gpio.3", NULL), - CLK(gpio2, "gpio.4", NULL), - CLK(gpio2, "gpio.5", NULL), - CLK(sdi5, "sdi5", NULL), - CLK(uart2, "uart2", NULL), - CLK(ske, "ske", NULL), - CLK(ske, "nmk-ske-keypad", NULL), - CLK(sdi2, "sdi2", NULL), - CLK(i2c0, "nmk-i2c.0", NULL), - CLK(fsmc, "fsmc", NULL), - - /* Peripheral Cluster #5 */ - CLK(gpio3, "gpio.8", NULL), - - /* Peripheral Cluster #6 */ - CLK(hash1, "hash1", NULL), - CLK(pka, "pka", NULL), - CLK(hash0, "hash0", NULL), - CLK(cryp0, "cryp0", NULL), - CLK(cryp1, "cryp1", NULL), - - /* PRCMU level clock gating */ - - /* Bank 0 */ - CLK(svaclk, "sva", NULL), - CLK(siaclk, "sia", NULL), - CLK(sgaclk, "sga", NULL), - CLK(slimclk, "slim", NULL), - CLK(lcdclk, "lcd", NULL), - CLK(bmlclk, "bml", NULL), - CLK(hsitxclk, "stm-hsi.0", NULL), - CLK(hsirxclk, "stm-hsi.1", NULL), - CLK(hdmiclk, "hdmi", NULL), - CLK(apeatclk, "apeat", NULL), - CLK(apetraceclk, "apetrace", NULL), - CLK(mcdeclk, "mcde", NULL), - CLK(ipi2clk, "ipi2", NULL), - CLK(dmaclk, "dma40.0", NULL), - CLK(b2r2clk, "b2r2", NULL), - CLK(tvclk, "tv", NULL), - - /* Peripheral Cluster #1 */ - CLK(i2c4, "nmk-i2c.4", NULL), - CLK(spi3, "spi3", NULL), - CLK(msp1, "ux500-msp-i2s.1", NULL), - CLK(msp3, "ux500-msp-i2s.3", NULL), - - /* Peripheral Cluster #2 */ - CLK(gpio1, "gpio.6", NULL), - CLK(gpio1, "gpio.7", NULL), - CLK(ssitx, "ssitx", NULL), - CLK(ssirx, "ssirx", NULL), - CLK(spi0, "spi0", NULL), - CLK(sdi3, "sdi3", NULL), - CLK(sdi1, "sdi1", NULL), - CLK(msp2, "ux500-msp-i2s.2", NULL), - CLK(sdi4, "sdi4", NULL), - CLK(pwl, "pwl", NULL), - CLK(spi1, "spi1", NULL), - CLK(spi2, "spi2", NULL), - CLK(i2c3, "nmk-i2c.3", NULL), - - /* Peripheral Cluster #3 */ - CLK(ssp1, "ssp1", NULL), - CLK(ssp0, "ssp0", NULL), - - /* Peripheral Cluster #5 */ - CLK(usb, "musb-ux500.0", "usb"), - - /* Peripheral Cluster #6 */ - CLK(mtu1, "mtu1", NULL), - CLK(mtu0, "mtu0", NULL), - CLK(cfgreg, "cfgreg", NULL), - CLK(hash1, "hash1", NULL), - CLK(unipro, "unipro", NULL), - CLK(rng, "rng", NULL), - - /* PRCMU level clock gating */ - - /* Bank 0 */ - CLK(uniproclk, "uniproclk", NULL), - CLK(dsialtclk, "dsialt", NULL), - - /* Bank 1 */ - CLK(rngclk, "rng", NULL), - CLK(uiccclk, "uicc", NULL), -}; - -#ifdef CONFIG_DEBUG_FS -/* - * debugfs support to trace clock tree hierarchy and attributes with - * powerdebug - */ -static struct dentry *clk_debugfs_root; - -void __init clk_debugfs_add_table(struct clk_lookup *cl, size_t num) -{ - while (num--) { - /* Check that the clock has not been already registered */ - if (!(cl->clk->list.prev != cl->clk->list.next)) - list_add_tail(&cl->clk->list, &clk_list); - - cl++; - } -} - -static ssize_t usecount_dbg_read(struct file *file, char __user *buf, - size_t size, loff_t *off) -{ - struct clk *clk = file->f_dentry->d_inode->i_private; - char cusecount[128]; - unsigned int len; - - len = sprintf(cusecount, "%u\n", clk->enabled); - return simple_read_from_buffer(buf, size, off, cusecount, len); -} - -static ssize_t rate_dbg_read(struct file *file, char __user *buf, - size_t size, loff_t *off) -{ - struct clk *clk = file->f_dentry->d_inode->i_private; - char crate[128]; - unsigned int rate; - unsigned int len; - - rate = clk_get_rate(clk); - len = sprintf(crate, "%u\n", rate); - return simple_read_from_buffer(buf, size, off, crate, len); -} - -static const struct file_operations usecount_fops = { - .read = usecount_dbg_read, -}; - -static const struct file_operations set_rate_fops = { - .read = rate_dbg_read, -}; - -static struct dentry *clk_debugfs_register_dir(struct clk *c, - struct dentry *p_dentry) -{ - struct dentry *d, *clk_d; - const char *p = c->name; - - if (!p) - p = "BUG"; - - clk_d = debugfs_create_dir(p, p_dentry); - if (!clk_d) - return NULL; - - d = debugfs_create_file("usecount", S_IRUGO, - clk_d, c, &usecount_fops); - if (!d) - goto err_out; - d = debugfs_create_file("rate", S_IRUGO, - clk_d, c, &set_rate_fops); - if (!d) - goto err_out; - /* - * TODO : not currently available in ux500 - * d = debugfs_create_x32("flags", S_IRUGO, clk_d, (u32 *)&c->flags); - * if (!d) - * goto err_out; - */ - - return clk_d; - -err_out: - debugfs_remove_recursive(clk_d); - return NULL; -} - -static int clk_debugfs_register_one(struct clk *c) -{ - struct clk *pa = c->parent_periph; - struct clk *bpa = c->parent_cluster; - - if (!(bpa && !pa)) { - c->dent = clk_debugfs_register_dir(c, - pa ? pa->dent : clk_debugfs_root); - if (!c->dent) - return -ENOMEM; - } - - if (bpa) { - c->dent_bus = clk_debugfs_register_dir(c, - bpa->dent_bus ? bpa->dent_bus : bpa->dent); - if ((!c->dent_bus) && (c->dent)) { - debugfs_remove_recursive(c->dent); - c->dent = NULL; - return -ENOMEM; - } - } - return 0; -} - -static int clk_debugfs_register(struct clk *c) -{ - int err; - struct clk *pa = c->parent_periph; - struct clk *bpa = c->parent_cluster; - - if (pa && (!pa->dent && !pa->dent_bus)) { - err = clk_debugfs_register(pa); - if (err) - return err; - } - - if (bpa && (!bpa->dent && !bpa->dent_bus)) { - err = clk_debugfs_register(bpa); - if (err) - return err; - } - - if ((!c->dent) && (!c->dent_bus)) { - err = clk_debugfs_register_one(c); - if (err) - return err; - } - return 0; -} - -int __init clk_debugfs_init(void) -{ - struct clk *c; - struct dentry *d; - int err; - - d = debugfs_create_dir("clock", NULL); - if (!d) - return -ENOMEM; - clk_debugfs_root = d; - - list_for_each_entry(c, &clk_list, list) { - err = clk_debugfs_register(c); - if (err) - goto err_out; - } - return 0; -err_out: - debugfs_remove_recursive(clk_debugfs_root); - return err; -} - -#endif /* defined(CONFIG_DEBUG_FS) */ - -unsigned long clk_smp_twd_rate = 500000000; - -unsigned long clk_smp_twd_get_rate(struct clk *clk) -{ - return clk_smp_twd_rate; -} - -static struct clk clk_smp_twd = { - .get_rate = clk_smp_twd_get_rate, - .name = "smp_twd", -}; - -static struct clk_lookup clk_smp_twd_lookup = { - .dev_id = "smp_twd", - .clk = &clk_smp_twd, -}; - -#ifdef CONFIG_CPU_FREQ - -static int clk_twd_cpufreq_transition(struct notifier_block *nb, - unsigned long state, void *data) -{ - struct cpufreq_freqs *f = data; - - if (state == CPUFREQ_PRECHANGE) { - /* Save frequency in simple Hz */ - clk_smp_twd_rate = (f->new * 1000) / 2; - } - - return NOTIFY_OK; -} - -static struct notifier_block clk_twd_cpufreq_nb = { - .notifier_call = clk_twd_cpufreq_transition, -}; - -int clk_init_smp_twd_cpufreq(void) -{ - return cpufreq_register_notifier(&clk_twd_cpufreq_nb, - CPUFREQ_TRANSITION_NOTIFIER); -} - -#endif - -int __init clk_init(void) -{ - clkdev_add_table(u8500_clks, ARRAY_SIZE(u8500_clks)); - clkdev_add(&clk_smp_twd_lookup); - -#ifdef CONFIG_DEBUG_FS - clk_debugfs_add_table(u8500_clks, ARRAY_SIZE(u8500_clks)); -#endif - return 0; -} diff --git a/arch/arm/mach-ux500/clock.h b/arch/arm/mach-ux500/clock.h deleted file mode 100644 index 65d27a13f46..00000000000 --- a/arch/arm/mach-ux500/clock.h +++ /dev/null @@ -1,164 +0,0 @@ -/* - * Copyright (C) 2010 ST-Ericsson - * Copyright (C) 2009 STMicroelectronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/** - * struct clkops - ux500 clock operations - * @enable: function to enable the clock - * @disable: function to disable the clock - * @get_rate: function to get the current clock rate - * - * This structure contains function pointers to functions that will be used to - * control the clock. All of these functions are optional. If get_rate is - * NULL, the rate in the struct clk will be used. - */ -struct clkops { - void (*enable) (struct clk *); - void (*disable) (struct clk *); - unsigned long (*get_rate) (struct clk *); - int (*set_parent)(struct clk *, struct clk *); -}; - -/** - * struct clk - ux500 clock structure - * @ops: pointer to clkops struct used to control this clock - * @name: name, for debugging - * @enabled: refcount. positive if enabled, zero if disabled - * @get_rate: custom callback for getting the clock rate - * @data: custom per-clock data for example for the get_rate - * callback - * @rate: fixed rate for clocks which don't implement - * ops->getrate - * @prcmu_cg_off: address offset of the combined enable/disable register - * (used on u8500v1) - * @prcmu_cg_bit: bit in the combined enable/disable register (used on - * u8500v1) - * @prcmu_cg_mgt: address of the enable/disable register (used on - * u8500ed) - * @cluster: peripheral cluster number - * @prcc_bus: bit for the bus clock in the peripheral's CLKRST - * @prcc_kernel: bit for the kernel clock in the peripheral's CLKRST. - * -1 if no kernel clock exists. - * @parent_cluster: pointer to parent's cluster clk struct - * @parent_periph: pointer to parent's peripheral clk struct - * - * Peripherals are organised into clusters, and each cluster has an associated - * bus clock. Some peripherals also have a parent peripheral clock. - * - * In order to enable a clock for a peripheral, we need to enable: - * (1) the parent cluster (bus) clock at the PRCMU level - * (2) the parent peripheral clock (if any) at the PRCMU level - * (3) the peripheral's bus & kernel clock at the PRCC level - * - * (1) and (2) are handled by defining clk structs (DEFINE_PRCMU_CLK) for each - * of the cluster and peripheral clocks, and hooking these as the parents of - * the individual peripheral clocks. - * - * (3) is handled by specifying the bits in the PRCC control registers required - * to enable these clocks and modifying them in the ->enable and - * ->disable callbacks of the peripheral clocks (DEFINE_PRCC_CLK). - * - * This structure describes both the PRCMU-level clocks and PRCC-level clocks. - * The prcmu_* fields are only used for the PRCMU clocks, and the cluster, - * prcc, and parent pointers are only used for the PRCC-level clocks. - */ -struct clk { - const struct clkops *ops; - const char *name; - unsigned int enabled; - unsigned long (*get_rate)(struct clk *); - void *data; - - unsigned long rate; - struct list_head list; - - /* These three are only for PRCMU clks */ - - unsigned int prcmu_cg_off; - unsigned int prcmu_cg_bit; - unsigned int prcmu_cg_mgt; - - /* The rest are only for PRCC clks */ - - int cluster; - unsigned int prcc_bus; - unsigned int prcc_kernel; - - struct clk *parent_cluster; - struct clk *parent_periph; -#if defined(CONFIG_DEBUG_FS) - struct dentry *dent; /* For visible tree hierarchy */ - struct dentry *dent_bus; /* For visible tree hierarchy */ -#endif -}; - -#define DEFINE_PRCMU_CLK(_name, _cg_off, _cg_bit, _reg) \ -struct clk clk_##_name = { \ - .name = #_name, \ - .ops = &clk_prcmu_ops, \ - .prcmu_cg_off = _cg_off, \ - .prcmu_cg_bit = _cg_bit, \ - .prcmu_cg_mgt = PRCM_##_reg##_MGT \ - } - -#define DEFINE_PRCMU_CLK_RATE(_name, _cg_off, _cg_bit, _reg, _rate) \ -struct clk clk_##_name = { \ - .name = #_name, \ - .ops = &clk_prcmu_ops, \ - .prcmu_cg_off = _cg_off, \ - .prcmu_cg_bit = _cg_bit, \ - .rate = _rate, \ - .prcmu_cg_mgt = PRCM_##_reg##_MGT \ - } - -#define DEFINE_PRCC_CLK(_pclust, _name, _bus_en, _kernel_en, _kernclk) \ -struct clk clk_##_name = { \ - .name = #_name, \ - .ops = &clk_prcc_ops, \ - .cluster = _pclust, \ - .prcc_bus = _bus_en, \ - .prcc_kernel = _kernel_en, \ - .parent_cluster = &clk_per##_pclust##clk, \ - .parent_periph = _kernclk \ - } - -#define DEFINE_PRCC_CLK_CUSTOM(_pclust, _name, _bus_en, _kernel_en, _kernclk, _callback, _data) \ -struct clk clk_##_name = { \ - .name = #_name, \ - .ops = &clk_prcc_ops, \ - .cluster = _pclust, \ - .prcc_bus = _bus_en, \ - .prcc_kernel = _kernel_en, \ - .parent_cluster = &clk_per##_pclust##clk, \ - .parent_periph = _kernclk, \ - .get_rate = _callback, \ - .data = (void *) _data \ - } - - -#define CLK(_clk, _devname, _conname) \ - { \ - .clk = &clk_##_clk, \ - .dev_id = _devname, \ - .con_id = _conname, \ - } - -int __init clk_db8500_ed_fixup(void); -int __init clk_init(void); - -#ifdef CONFIG_DEBUG_FS -int clk_debugfs_init(void); -#else -static inline int clk_debugfs_init(void) { return 0; } -#endif - -#ifdef CONFIG_CPU_FREQ -int clk_init_smp_twd_cpufreq(void); -#else -static inline int clk_init_smp_twd_cpufreq(void) { return 0; } -#endif diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index e2360e7c770..17a78ec516f 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -8,7 +8,6 @@ #include <linux/platform_device.h> #include <linux/io.h> -#include <linux/clk.h> #include <linux/mfd/db8500-prcmu.h> #include <linux/clksrc-dbx500-prcmu.h> #include <linux/sys_soc.h> @@ -17,6 +16,7 @@ #include <linux/stat.h> #include <linux/of.h> #include <linux/of_irq.h> +#include <linux/platform_data/clk-ux500.h> #include <asm/hardware/gic.h> #include <asm/mach/map.h> @@ -25,8 +25,6 @@ #include <mach/setup.h> #include <mach/devices.h> -#include "clock.h" - void __iomem *_PRCMU_BASE; /* @@ -70,13 +68,17 @@ void __init ux500_init_irq(void) */ if (cpu_is_u8500_family()) db8500_prcmu_early_init(); - clk_init(); + + if (cpu_is_u8500_family()) + u8500_clk_init(); + else if (cpu_is_u9540()) + u9540_clk_init(); + else if (cpu_is_u8540()) + u8540_clk_init(); } void __init ux500_init_late(void) { - clk_debugfs_init(); - clk_init_smp_twd_cpufreq(); } static const char * __init ux500_get_machine(void) diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 7f0b5ca7851..bace9e98f75 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -40,4 +40,17 @@ config COMMON_CLK_WM831X Supports the clocking subsystem of the WM831x/2x series of PMICs from Wolfson Microlectronics. +config COMMON_CLK_VERSATILE + bool "Clock driver for ARM Reference designs" + depends on ARCH_INTEGRATOR || ARCH_REALVIEW + ---help--- + Supports clocking on ARM Reference designs Integrator/AP, + Integrator/CP, RealView PB1176, EB, PB11MP and PBX. + +config COMMON_CLK_MAX77686 + tristate "Clock driver for Maxim 77686 MFD" + depends on MFD_MAX77686 + ---help--- + This driver supports Maxim 77686 crystal oscillator clock. + endmenu diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 72ce247a0e8..b7b862077d8 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -10,7 +10,14 @@ obj-$(CONFIG_ARCH_MXS) += mxs/ obj-$(CONFIG_ARCH_SOCFPGA) += socfpga/ obj-$(CONFIG_PLAT_SPEAR) += spear/ obj-$(CONFIG_ARCH_U300) += clk-u300.o -obj-$(CONFIG_ARCH_INTEGRATOR) += versatile/ +obj-$(CONFIG_COMMON_CLK_VERSATILE) += versatile/ +obj-$(CONFIG_ARCH_PRIMA2) += clk-prima2.o +ifeq ($(CONFIG_COMMON_CLK), y) +obj-$(CONFIG_ARCH_MMP) += mmp/ +endif +obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o +obj-$(CONFIG_ARCH_U8500) += ux500/ # Chip specific obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o +obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o diff --git a/drivers/clk/clk-ls1x.c b/drivers/clk/clk-ls1x.c new file mode 100644 index 00000000000..f20b750235f --- /dev/null +++ b/drivers/clk/clk-ls1x.c @@ -0,0 +1,111 @@ +/* + * Copyright (c) 2012 Zhang, Keguang <keguang.zhang@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/err.h> + +#include <loongson1.h> + +#define OSC 33 + +static DEFINE_SPINLOCK(_lock); + +static int ls1x_pll_clk_enable(struct clk_hw *hw) +{ + return 0; +} + +static void ls1x_pll_clk_disable(struct clk_hw *hw) +{ +} + +static unsigned long ls1x_pll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + u32 pll, rate; + + pll = __raw_readl(LS1X_CLK_PLL_FREQ); + rate = ((12 + (pll & 0x3f)) * 1000000) + + ((((pll >> 8) & 0x3ff) * 1000000) >> 10); + rate *= OSC; + rate >>= 1; + + return rate; +} + +static const struct clk_ops ls1x_pll_clk_ops = { + .enable = ls1x_pll_clk_enable, + .disable = ls1x_pll_clk_disable, + .recalc_rate = ls1x_pll_recalc_rate, +}; + +static struct clk * __init clk_register_pll(struct device *dev, + const char *name, const char *parent_name, unsigned long flags) +{ + struct clk_hw *hw; + struct clk *clk; + struct clk_init_data init; + + /* allocate the divider */ + hw = kzalloc(sizeof(struct clk_hw), GFP_KERNEL); + if (!hw) { + pr_err("%s: could not allocate clk_hw\n", __func__); + return ERR_PTR(-ENOMEM); + } + + init.name = name; + init.ops = &ls1x_pll_clk_ops; + init.flags = flags | CLK_IS_BASIC; + init.parent_names = (parent_name ? &parent_name : NULL); + init.num_parents = (parent_name ? 1 : 0); + hw->init = &init; + + /* register the clock */ + clk = clk_register(dev, hw); + + if (IS_ERR(clk)) + kfree(hw); + + return clk; +} + +void __init ls1x_clk_init(void) +{ + struct clk *clk; + + clk = clk_register_pll(NULL, "pll_clk", NULL, CLK_IS_ROOT); + clk_prepare_enable(clk); + + clk = clk_register_divider(NULL, "cpu_clk", "pll_clk", + CLK_SET_RATE_PARENT, LS1X_CLK_PLL_DIV, DIV_CPU_SHIFT, + DIV_CPU_WIDTH, CLK_DIVIDER_ONE_BASED, &_lock); + clk_prepare_enable(clk); + clk_register_clkdev(clk, "cpu", NULL); + + clk = clk_register_divider(NULL, "dc_clk", "pll_clk", + CLK_SET_RATE_PARENT, LS1X_CLK_PLL_DIV, DIV_DC_SHIFT, + DIV_DC_WIDTH, CLK_DIVIDER_ONE_BASED, &_lock); + clk_prepare_enable(clk); + clk_register_clkdev(clk, "dc", NULL); + + clk = clk_register_divider(NULL, "ahb_clk", "pll_clk", + CLK_SET_RATE_PARENT, LS1X_CLK_PLL_DIV, DIV_DDR_SHIFT, + DIV_DDR_WIDTH, CLK_DIVIDER_ONE_BASED, &_lock); + clk_prepare_enable(clk); + clk_register_clkdev(clk, "ahb", NULL); + clk_register_clkdev(clk, "stmmaceth", NULL); + + clk = clk_register_fixed_factor(NULL, "apb_clk", "ahb_clk", 0, 1, 2); + clk_prepare_enable(clk); + clk_register_clkdev(clk, "apb", NULL); + clk_register_clkdev(clk, "serial8250", NULL); +} diff --git a/drivers/clk/clk-max77686.c b/drivers/clk/clk-max77686.c new file mode 100644 index 00000000000..ac5f5434cb9 --- /dev/null +++ b/drivers/clk/clk-max77686.c @@ -0,0 +1,244 @@ +/* + * clk-max77686.c - Clock driver for Maxim 77686 + * + * Copyright (C) 2012 Samsung Electornics + * Jonghwa Lee <jonghwa3.lee@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/mfd/max77686.h> +#include <linux/mfd/max77686-private.h> +#include <linux/clk-provider.h> +#include <linux/mutex.h> +#include <linux/clkdev.h> + +enum { + MAX77686_CLK_AP = 0, + MAX77686_CLK_CP, + MAX77686_CLK_PMIC, + MAX77686_CLKS_NUM, +}; + +struct max77686_clk { + struct max77686_dev *iodev; + u32 mask; + struct clk_hw hw; + struct clk_lookup *lookup; +}; + +static struct max77686_clk *get_max77686_clk(struct clk_hw *hw) +{ + return container_of(hw, struct max77686_clk, hw); +} + +static int max77686_clk_prepare(struct clk_hw *hw) +{ + struct max77686_clk *max77686; + int ret; + + max77686 = get_max77686_clk(hw); + if (!max77686) + return -ENOMEM; + + ret = regmap_update_bits(max77686->iodev->regmap, + MAX77686_REG_32KHZ, max77686->mask, max77686->mask); + + return ret; +} + +static void max77686_clk_unprepare(struct clk_hw *hw) +{ + struct max77686_clk *max77686; + + max77686 = get_max77686_clk(hw); + if (!max77686) + return; + + regmap_update_bits(max77686->iodev->regmap, + MAX77686_REG_32KHZ, max77686->mask, ~max77686->mask); +} + +static int max77686_clk_is_enabled(struct clk_hw *hw) +{ + struct max77686_clk *max77686; + int ret; + u32 val; + + max77686 = get_max77686_clk(hw); + if (!max77686) + return -ENOMEM; + + ret = regmap_read(max77686->iodev->regmap, + MAX77686_REG_32KHZ, &val); + + if (ret < 0) + return -EINVAL; + + return val & max77686->mask; +} + +static struct clk_ops max77686_clk_ops = { + .prepare = max77686_clk_prepare, + .unprepare = max77686_clk_unprepare, + .is_enabled = max77686_clk_is_enabled, +}; + +static struct clk_init_data max77686_clks_init[MAX77686_CLKS_NUM] = { + [MAX77686_CLK_AP] = { + .name = "32khz_ap", + .ops = &max77686_clk_ops, + .flags = CLK_IS_ROOT, + }, + [MAX77686_CLK_CP] = { + .name = "32khz_cp", + .ops = &max77686_clk_ops, + .flags = CLK_IS_ROOT, + }, + [MAX77686_CLK_PMIC] = { + .name = "32khz_pmic", + .ops = &max77686_clk_ops, + .flags = CLK_IS_ROOT, + }, +}; + +static int max77686_clk_register(struct device *dev, + struct max77686_clk *max77686) +{ + struct clk *clk; + struct clk_hw *hw = &max77686->hw; + + clk = clk_register(dev, hw); + + if (IS_ERR(clk)) + return -ENOMEM; + + max77686->lookup = devm_kzalloc(dev, sizeof(struct clk_lookup), + GFP_KERNEL); + if (IS_ERR(max77686->lookup)) + return -ENOMEM; + + max77686->lookup->con_id = hw->init->name; + max77686->lookup->clk = clk; + + clkdev_add(max77686->lookup); + + return 0; +} + +static __devinit int max77686_clk_probe(struct platform_device *pdev) +{ + struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent); + struct max77686_clk **max77686_clks; + int i, ret; + + max77686_clks = devm_kzalloc(&pdev->dev, sizeof(struct max77686_clk *) + * MAX77686_CLKS_NUM, GFP_KERNEL); + if (IS_ERR(max77686_clks)) + return -ENOMEM; + + for (i = 0; i < MAX77686_CLKS_NUM; i++) { + max77686_clks[i] = devm_kzalloc(&pdev->dev, + sizeof(struct max77686_clk), GFP_KERNEL); + if (IS_ERR(max77686_clks[i])) + return -ENOMEM; + } + + for (i = 0; i < MAX77686_CLKS_NUM; i++) { + max77686_clks[i]->iodev = iodev; + max77686_clks[i]->mask = 1 << i; + max77686_clks[i]->hw.init = &max77686_clks_init[i]; + + ret = max77686_clk_register(&pdev->dev, max77686_clks[i]); + if (ret) { + switch (i) { + case MAX77686_CLK_AP: + dev_err(&pdev->dev, "Fail to register CLK_AP\n"); + goto err_clk_ap; + break; + case MAX77686_CLK_CP: + dev_err(&pdev->dev, "Fail to register CLK_CP\n"); + goto err_clk_cp; + break; + case MAX77686_CLK_PMIC: + dev_err(&pdev->dev, "Fail to register CLK_PMIC\n"); + goto err_clk_pmic; + } + } + } + + platform_set_drvdata(pdev, max77686_clks); + + goto out; + +err_clk_pmic: + clkdev_drop(max77686_clks[MAX77686_CLK_CP]->lookup); + kfree(max77686_clks[MAX77686_CLK_CP]->hw.clk); +err_clk_cp: + clkdev_drop(max77686_clks[MAX77686_CLK_AP]->lookup); + kfree(max77686_clks[MAX77686_CLK_AP]->hw.clk); +err_clk_ap: +out: + return ret; +} + +static int __devexit max77686_clk_remove(struct platform_device *pdev) +{ + struct max77686_clk **max77686_clks = platform_get_drvdata(pdev); + int i; + + for (i = 0; i < MAX77686_CLKS_NUM; i++) { + clkdev_drop(max77686_clks[i]->lookup); + kfree(max77686_clks[i]->hw.clk); + } + return 0; +} + +static const struct platform_device_id max77686_clk_id[] = { + { "max77686-clk", 0}, + { }, +}; +MODULE_DEVICE_TABLE(platform, max77686_clk_id); + +static struct platform_driver max77686_clk_driver = { + .driver = { + .name = "max77686-clk", + .owner = THIS_MODULE, + }, + .probe = max77686_clk_probe, + .remove = __devexit_p(max77686_clk_remove), + .id_table = max77686_clk_id, +}; + +static int __init max77686_clk_init(void) +{ + return platform_driver_register(&max77686_clk_driver); +} +subsys_initcall(max77686_clk_init); + +static void __init max77686_clk_cleanup(void) +{ + platform_driver_unregister(&max77686_clk_driver); +} +module_exit(max77686_clk_cleanup); + +MODULE_DESCRIPTION("MAXIM 77686 Clock Driver"); +MODULE_AUTHOR("Jonghwa Lee <jonghwa3.lee@samsung.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/clk/clk-prima2.c b/drivers/clk/clk-prima2.c new file mode 100644 index 00000000000..517874fa685 --- /dev/null +++ b/drivers/clk/clk-prima2.c @@ -0,0 +1,1171 @@ +/* + * Clock tree for CSR SiRFprimaII + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#include <linux/module.h> +#include <linux/bitops.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/of_address.h> +#include <linux/syscore_ops.h> + +#define SIRFSOC_CLKC_CLK_EN0 0x0000 +#define SIRFSOC_CLKC_CLK_EN1 0x0004 +#define SIRFSOC_CLKC_REF_CFG 0x0014 +#define SIRFSOC_CLKC_CPU_CFG 0x0018 +#define SIRFSOC_CLKC_MEM_CFG 0x001c +#define SIRFSOC_CLKC_SYS_CFG 0x0020 +#define SIRFSOC_CLKC_IO_CFG 0x0024 +#define SIRFSOC_CLKC_DSP_CFG 0x0028 +#define SIRFSOC_CLKC_GFX_CFG 0x002c +#define SIRFSOC_CLKC_MM_CFG 0x0030 +#define SIRFSOC_CLKC_LCD_CFG 0x0034 +#define SIRFSOC_CLKC_MMC_CFG 0x0038 +#define SIRFSOC_CLKC_PLL1_CFG0 0x0040 +#define SIRFSOC_CLKC_PLL2_CFG0 0x0044 +#define SIRFSOC_CLKC_PLL3_CFG0 0x0048 +#define SIRFSOC_CLKC_PLL1_CFG1 0x004c +#define SIRFSOC_CLKC_PLL2_CFG1 0x0050 +#define SIRFSOC_CLKC_PLL3_CFG1 0x0054 +#define SIRFSOC_CLKC_PLL1_CFG2 0x0058 +#define SIRFSOC_CLKC_PLL2_CFG2 0x005c +#define SIRFSOC_CLKC_PLL3_CFG2 0x0060 +#define SIRFSOC_USBPHY_PLL_CTRL 0x0008 +#define SIRFSOC_USBPHY_PLL_POWERDOWN BIT(1) +#define SIRFSOC_USBPHY_PLL_BYPASS BIT(2) +#define SIRFSOC_USBPHY_PLL_LOCK BIT(3) + +static void *sirfsoc_clk_vbase, *sirfsoc_rsc_vbase; + +#define KHZ 1000 +#define MHZ (KHZ * KHZ) + +/* + * SiRFprimaII clock controller + * - 2 oscillators: osc-26MHz, rtc-32.768KHz + * - 3 standard configurable plls: pll1, pll2 & pll3 + * - 2 exclusive plls: usb phy pll and sata phy pll + * - 8 clock domains: cpu/cpudiv, mem/memdiv, sys/io, dsp, graphic, multimedia, + * display and sdphy. + * Each clock domain can select its own clock source from five clock sources, + * X_XIN, X_XINW, PLL1, PLL2 and PLL3. The domain clock is used as the source + * clock of the group clock. + * - dsp domain: gps, mf + * - io domain: dmac, nand, audio, uart, i2c, spi, usp, pwm, pulse + * - sys domain: security + */ + +struct clk_pll { + struct clk_hw hw; + unsigned short regofs; /* register offset */ +}; + +#define to_pllclk(_hw) container_of(_hw, struct clk_pll, hw) + +struct clk_dmn { + struct clk_hw hw; + signed char enable_bit; /* enable bit: 0 ~ 63 */ + unsigned short regofs; /* register offset */ +}; + +#define to_dmnclk(_hw) container_of(_hw, struct clk_dmn, hw) + +struct clk_std { + struct clk_hw hw; + signed char enable_bit; /* enable bit: 0 ~ 63 */ +}; + +#define to_stdclk(_hw) container_of(_hw, struct clk_std, hw) + +static int std_clk_is_enabled(struct clk_hw *hw); +static int std_clk_enable(struct clk_hw *hw); +static void std_clk_disable(struct clk_hw *hw); + +static inline unsigned long clkc_readl(unsigned reg) +{ + return readl(sirfsoc_clk_vbase + reg); +} + +static inline void clkc_writel(u32 val, unsigned reg) +{ + writel(val, sirfsoc_clk_vbase + reg); +} + +/* + * std pll + */ + +static unsigned long pll_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + unsigned long fin = parent_rate; + struct clk_pll *clk = to_pllclk(hw); + u32 regcfg2 = clk->regofs + SIRFSOC_CLKC_PLL1_CFG2 - + SIRFSOC_CLKC_PLL1_CFG0; + + if (clkc_readl(regcfg2) & BIT(2)) { + /* pll bypass mode */ + return fin; + } else { + /* fout = fin * nf / nr / od */ + u32 cfg0 = clkc_readl(clk->regofs); + u32 nf = (cfg0 & (BIT(13) - 1)) + 1; + u32 nr = ((cfg0 >> 13) & (BIT(6) - 1)) + 1; + u32 od = ((cfg0 >> 19) & (BIT(4) - 1)) + 1; + WARN_ON(fin % MHZ); + return fin / MHZ * nf / nr / od * MHZ; + } +} + +static long pll_clk_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + unsigned long fin, nf, nr, od; + + /* + * fout = fin * nf / (nr * od); + * set od = 1, nr = fin/MHz, so fout = nf * MHz + */ + rate = rate - rate % MHZ; + + nf = rate / MHZ; + if (nf > BIT(13)) + nf = BIT(13); + if (nf < 1) + nf = 1; + + fin = *parent_rate; + + nr = fin / MHZ; + if (nr > BIT(6)) + nr = BIT(6); + od = 1; + + return fin * nf / (nr * od); +} + +static int pll_clk_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_pll *clk = to_pllclk(hw); + unsigned long fin, nf, nr, od, reg; + + /* + * fout = fin * nf / (nr * od); + * set od = 1, nr = fin/MHz, so fout = nf * MHz + */ + + nf = rate / MHZ; + if (unlikely((rate % MHZ) || nf > BIT(13) || nf < 1)) + return -EINVAL; + + fin = parent_rate; + BUG_ON(fin < MHZ); + + nr = fin / MHZ; + BUG_ON((fin % MHZ) || nr > BIT(6)); + + od = 1; + + reg = (nf - 1) | ((nr - 1) << 13) | ((od - 1) << 19); + clkc_writel(reg, clk->regofs); + + reg = clk->regofs + SIRFSOC_CLKC_PLL1_CFG1 - SIRFSOC_CLKC_PLL1_CFG0; + clkc_writel((nf >> 1) - 1, reg); + + reg = clk->regofs + SIRFSOC_CLKC_PLL1_CFG2 - SIRFSOC_CLKC_PLL1_CFG0; + while (!(clkc_readl(reg) & BIT(6))) + cpu_relax(); + + return 0; +} + +static struct clk_ops std_pll_ops = { + .recalc_rate = pll_clk_recalc_rate, + .round_rate = pll_clk_round_rate, + .set_rate = pll_clk_set_rate, +}; + +static const char *pll_clk_parents[] = { + "osc", +}; + +static struct clk_init_data clk_pll1_init = { + .name = "pll1", + .ops = &std_pll_ops, + .parent_names = pll_clk_parents, + .num_parents = ARRAY_SIZE(pll_clk_parents), +}; + +static struct clk_init_data clk_pll2_init = { + .name = "pll2", + .ops = &std_pll_ops, + .parent_names = pll_clk_parents, + .num_parents = ARRAY_SIZE(pll_clk_parents), +}; + +static struct clk_init_data clk_pll3_init = { + .name = "pll3", + .ops = &std_pll_ops, + .parent_names = pll_clk_parents, + .num_parents = ARRAY_SIZE(pll_clk_parents), +}; + +static struct clk_pll clk_pll1 = { + .regofs = SIRFSOC_CLKC_PLL1_CFG0, + .hw = { + .init = &clk_pll1_init, + }, +}; + +static struct clk_pll clk_pll2 = { + .regofs = SIRFSOC_CLKC_PLL2_CFG0, + .hw = { + .init = &clk_pll2_init, + }, +}; + +static struct clk_pll clk_pll3 = { + .regofs = SIRFSOC_CLKC_PLL3_CFG0, + .hw = { + .init = &clk_pll3_init, + }, +}; + +/* + * usb uses specified pll + */ + +static int usb_pll_clk_enable(struct clk_hw *hw) +{ + u32 reg = readl(sirfsoc_rsc_vbase + SIRFSOC_USBPHY_PLL_CTRL); + reg &= ~(SIRFSOC_USBPHY_PLL_POWERDOWN | SIRFSOC_USBPHY_PLL_BYPASS); + writel(reg, sirfsoc_rsc_vbase + SIRFSOC_USBPHY_PLL_CTRL); + while (!(readl(sirfsoc_rsc_vbase + SIRFSOC_USBPHY_PLL_CTRL) & + SIRFSOC_USBPHY_PLL_LOCK)) + cpu_relax(); + + return 0; +} + +static void usb_pll_clk_disable(struct clk_hw *clk) +{ + u32 reg = readl(sirfsoc_rsc_vbase + SIRFSOC_USBPHY_PLL_CTRL); + reg |= (SIRFSOC_USBPHY_PLL_POWERDOWN | SIRFSOC_USBPHY_PLL_BYPASS); + writel(reg, sirfsoc_rsc_vbase + SIRFSOC_USBPHY_PLL_CTRL); +} + +static unsigned long usb_pll_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) +{ + u32 reg = readl(sirfsoc_rsc_vbase + SIRFSOC_USBPHY_PLL_CTRL); + return (reg & SIRFSOC_USBPHY_PLL_BYPASS) ? parent_rate : 48*MHZ; +} + +static struct clk_ops usb_pll_ops = { + .enable = usb_pll_clk_enable, + .disable = usb_pll_clk_disable, + .recalc_rate = usb_pll_clk_recalc_rate, +}; + +static struct clk_init_data clk_usb_pll_init = { + .name = "usb_pll", + .ops = &usb_pll_ops, + .parent_names = pll_clk_parents, + .num_parents = ARRAY_SIZE(pll_clk_parents), +}; + +static struct clk_hw usb_pll_clk_hw = { + .init = &clk_usb_pll_init, +}; + +/* + * clock domains - cpu, mem, sys/io, dsp, gfx + */ + +static const char *dmn_clk_parents[] = { + "rtc", + "osc", + "pll1", + "pll2", + "pll3", +}; + +static u8 dmn_clk_get_parent(struct clk_hw *hw) +{ + struct clk_dmn *clk = to_dmnclk(hw); + u32 cfg = clkc_readl(clk->regofs); + + /* parent of io domain can only be pll3 */ + if (strcmp(hw->init->name, "io") == 0) + return 4; + + WARN_ON((cfg & (BIT(3) - 1)) > 4); + + return cfg & (BIT(3) - 1); +} + +static int dmn_clk_set_parent(struct clk_hw *hw, u8 parent) +{ + struct clk_dmn *clk = to_dmnclk(hw); + u32 cfg = clkc_readl(clk->regofs); + + /* parent of io domain can only be pll3 */ + if (strcmp(hw->init->name, "io") == 0) + return -EINVAL; + + cfg &= ~(BIT(3) - 1); + clkc_writel(cfg | parent, clk->regofs); + /* BIT(3) - switching status: 1 - busy, 0 - done */ + while (clkc_readl(clk->regofs) & BIT(3)) + cpu_relax(); + + return 0; +} + +static unsigned long dmn_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) + +{ + unsigned long fin = parent_rate; + struct clk_dmn *clk = to_dmnclk(hw); + + u32 cfg = clkc_readl(clk->regofs); + + if (cfg & BIT(24)) { + /* fcd bypass mode */ + return fin; + } else { + /* + * wait count: bit[19:16], hold count: bit[23:20] + */ + u32 wait = (cfg >> 16) & (BIT(4) - 1); + u32 hold = (cfg >> 20) & (BIT(4) - 1); + + return fin / (wait + hold + 2); + } +} + +static long dmn_clk_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + unsigned long fin; + unsigned ratio, wait, hold; + unsigned bits = (strcmp(hw->init->name, "mem") == 0) ? 3 : 4; + + fin = *parent_rate; + ratio = fin / rate; + + if (ratio < 2) + ratio = 2; + if (ratio > BIT(bits + 1)) + ratio = BIT(bits + 1); + + wait = (ratio >> 1) - 1; + hold = ratio - wait - 2; + + return fin / (wait + hold + 2); +} + +static int dmn_clk_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_dmn *clk = to_dmnclk(hw); + unsigned long fin; + unsigned ratio, wait, hold, reg; + unsigned bits = (strcmp(hw->init->name, "mem") == 0) ? 3 : 4; + + fin = parent_rate; + ratio = fin / rate; + + if (unlikely(ratio < 2 || ratio > BIT(bits + 1))) + return -EINVAL; + + WARN_ON(fin % rate); + + wait = (ratio >> 1) - 1; + hold = ratio - wait - 2; + + reg = clkc_readl(clk->regofs); + reg &= ~(((BIT(bits) - 1) << 16) | ((BIT(bits) - 1) << 20)); + reg |= (wait << 16) | (hold << 20) | BIT(25); + clkc_writel(reg, clk->regofs); + + /* waiting FCD been effective */ + while (clkc_readl(clk->regofs) & BIT(25)) + cpu_relax(); + + return 0; +} + +static struct clk_ops msi_ops = { + .set_rate = dmn_clk_set_rate, + .round_rate = dmn_clk_round_rate, + .recalc_rate = dmn_clk_recalc_rate, + .set_parent = dmn_clk_set_parent, + .get_parent = dmn_clk_get_parent, +}; + +static struct clk_init_data clk_mem_init = { + .name = "mem", + .ops = &msi_ops, + .parent_names = dmn_clk_parents, + .num_parents = ARRAY_SIZE(dmn_clk_parents), +}; + +static struct clk_dmn clk_mem = { + .regofs = SIRFSOC_CLKC_MEM_CFG, + .hw = { + .init = &clk_mem_init, + }, +}; + +static struct clk_init_data clk_sys_init = { + .name = "sys", + .ops = &msi_ops, + .parent_names = dmn_clk_parents, + .num_parents = ARRAY_SIZE(dmn_clk_parents), + .flags = CLK_SET_RATE_GATE, +}; + +static struct clk_dmn clk_sys = { + .regofs = SIRFSOC_CLKC_SYS_CFG, + .hw = { + .init = &clk_sys_init, + }, +}; + +static struct clk_init_data clk_io_init = { + .name = "io", + .ops = &msi_ops, + .parent_names = dmn_clk_parents, + .num_parents = ARRAY_SIZE(dmn_clk_parents), +}; + +static struct clk_dmn clk_io = { + .regofs = SIRFSOC_CLKC_IO_CFG, + .hw = { + .init = &clk_io_init, + }, +}; + +static struct clk_ops cpu_ops = { + .set_parent = dmn_clk_set_parent, + .get_parent = dmn_clk_get_parent, +}; + +static struct clk_init_data clk_cpu_init = { + .name = "cpu", + .ops = &cpu_ops, + .parent_names = dmn_clk_parents, + .num_parents = ARRAY_SIZE(dmn_clk_parents), + .flags = CLK_SET_RATE_PARENT, +}; + +static struct clk_dmn clk_cpu = { + .regofs = SIRFSOC_CLKC_CPU_CFG, + .hw = { + .init = &clk_cpu_init, + }, +}; + +static struct clk_ops dmn_ops = { + .is_enabled = std_clk_is_enabled, + .enable = std_clk_enable, + .disable = std_clk_disable, + .set_rate = dmn_clk_set_rate, + .round_rate = dmn_clk_round_rate, + .recalc_rate = dmn_clk_recalc_rate, + .set_parent = dmn_clk_set_parent, + .get_parent = dmn_clk_get_parent, +}; + +/* dsp, gfx, mm, lcd and vpp domain */ + +static struct clk_init_data clk_dsp_init = { + .name = "dsp", + .ops = &dmn_ops, + .parent_names = dmn_clk_parents, + .num_parents = ARRAY_SIZE(dmn_clk_parents), +}; + +static struct clk_dmn clk_dsp = { + .regofs = SIRFSOC_CLKC_DSP_CFG, + .enable_bit = 0, + .hw = { + .init = &clk_dsp_init, + }, +}; + +static struct clk_init_data clk_gfx_init = { + .name = "gfx", + .ops = &dmn_ops, + .parent_names = dmn_clk_parents, + .num_parents = ARRAY_SIZE(dmn_clk_parents), +}; + +static struct clk_dmn clk_gfx = { + .regofs = SIRFSOC_CLKC_GFX_CFG, + .enable_bit = 8, + .hw = { + .init = &clk_gfx_init, + }, +}; + +static struct clk_init_data clk_mm_init = { + .name = "mm", + .ops = &dmn_ops, + .parent_names = dmn_clk_parents, + .num_parents = ARRAY_SIZE(dmn_clk_parents), +}; + +static struct clk_dmn clk_mm = { + .regofs = SIRFSOC_CLKC_MM_CFG, + .enable_bit = 9, + .hw = { + .init = &clk_mm_init, + }, +}; + +static struct clk_init_data clk_lcd_init = { + .name = "lcd", + .ops = &dmn_ops, + .parent_names = dmn_clk_parents, + .num_parents = ARRAY_SIZE(dmn_clk_parents), +}; + +static struct clk_dmn clk_lcd = { + .regofs = SIRFSOC_CLKC_LCD_CFG, + .enable_bit = 10, + .hw = { + .init = &clk_lcd_init, + }, +}; + +static struct clk_init_data clk_vpp_init = { + .name = "vpp", + .ops = &dmn_ops, + .parent_names = dmn_clk_parents, + .num_parents = ARRAY_SIZE(dmn_clk_parents), +}; + +static struct clk_dmn clk_vpp = { + .regofs = SIRFSOC_CLKC_LCD_CFG, + .enable_bit = 11, + .hw = { + .init = &clk_vpp_init, + }, +}; + +static struct clk_init_data clk_mmc01_init = { + .name = "mmc01", + .ops = &dmn_ops, + .parent_names = dmn_clk_parents, + .num_parents = ARRAY_SIZE(dmn_clk_parents), +}; + +static struct clk_dmn clk_mmc01 = { + .regofs = SIRFSOC_CLKC_MMC_CFG, + .enable_bit = 59, + .hw = { + .init = &clk_mmc01_init, + }, +}; + +static struct clk_init_data clk_mmc23_init = { + .name = "mmc23", + .ops = &dmn_ops, + .parent_names = dmn_clk_parents, + .num_parents = ARRAY_SIZE(dmn_clk_parents), +}; + +static struct clk_dmn clk_mmc23 = { + .regofs = SIRFSOC_CLKC_MMC_CFG, + .enable_bit = 60, + .hw = { + .init = &clk_mmc23_init, + }, +}; + +static struct clk_init_data clk_mmc45_init = { + .name = "mmc45", + .ops = &dmn_ops, + .parent_names = dmn_clk_parents, + .num_parents = ARRAY_SIZE(dmn_clk_parents), +}; + +static struct clk_dmn clk_mmc45 = { + .regofs = SIRFSOC_CLKC_MMC_CFG, + .enable_bit = 61, + .hw = { + .init = &clk_mmc45_init, + }, +}; + +/* + * peripheral controllers in io domain + */ + +static int std_clk_is_enabled(struct clk_hw *hw) +{ + u32 reg; + int bit; + struct clk_std *clk = to_stdclk(hw); + + bit = clk->enable_bit % 32; + reg = clk->enable_bit / 32; + reg = SIRFSOC_CLKC_CLK_EN0 + reg * sizeof(reg); + + return !!(clkc_readl(reg) & BIT(bit)); +} + +static int std_clk_enable(struct clk_hw *hw) +{ + u32 val, reg; + int bit; + struct clk_std *clk = to_stdclk(hw); + + BUG_ON(clk->enable_bit < 0 || clk->enable_bit > 63); + + bit = clk->enable_bit % 32; + reg = clk->enable_bit / 32; + reg = SIRFSOC_CLKC_CLK_EN0 + reg * sizeof(reg); + + val = clkc_readl(reg) | BIT(bit); + clkc_writel(val, reg); + return 0; +} + +static void std_clk_disable(struct clk_hw *hw) +{ + u32 val, reg; + int bit; + struct clk_std *clk = to_stdclk(hw); + + BUG_ON(clk->enable_bit < 0 || clk->enable_bit > 63); + + bit = clk->enable_bit % 32; + reg = clk->enable_bit / 32; + reg = SIRFSOC_CLKC_CLK_EN0 + reg * sizeof(reg); + + val = clkc_readl(reg) & ~BIT(bit); + clkc_writel(val, reg); +} + +static const char *std_clk_io_parents[] = { + "io", +}; + +static struct clk_ops ios_ops = { + .is_enabled = std_clk_is_enabled, + .enable = std_clk_enable, + .disable = std_clk_disable, +}; + +static struct clk_init_data clk_dmac0_init = { + .name = "dmac0", + .ops = &ios_ops, + .parent_names = std_clk_io_parents, + .num_parents = ARRAY_SIZE(std_clk_io_parents), +}; + +static struct clk_std clk_dmac0 = { + .enable_bit = 32, + .hw = { + .init = &clk_dmac0_init, + }, +}; + +static struct clk_init_data clk_dmac1_init = { + .name = "dmac1", + .ops = &ios_ops, + .parent_names = std_clk_io_parents, + .num_parents = ARRAY_SIZE(std_clk_io_parents), +}; + +static struct clk_std clk_dmac1 = { + .enable_bit = 33, + .hw = { + .init = &clk_dmac1_init, + }, +}; + +static struct clk_init_data clk_nand_init = { + .name = "nand", + .ops = &ios_ops, + .parent_names = std_clk_io_parents, + .num_parents = ARRAY_SIZE(std_clk_io_parents), +}; + +static struct clk_std clk_nand = { + .enable_bit = 34, + .hw = { + .init = &clk_nand_init, + }, +}; + +static struct clk_init_data clk_audio_init = { + .name = "audio", + .ops = &ios_ops, + .parent_names = std_clk_io_parents, + .num_parents = ARRAY_SIZE(std_clk_io_parents), +}; + +static struct clk_std clk_audio = { + .enable_bit = 35, + .hw = { + .init = &clk_audio_init, + }, +}; + +static struct clk_init_data clk_uart0_init = { + .name = "uart0", + .ops = &ios_ops, + .parent_names = std_clk_io_parents, + .num_parents = ARRAY_SIZE(std_clk_io_parents), +}; + +static struct clk_std clk_uart0 = { + .enable_bit = 36, + .hw = { + .init = &clk_uart0_init, + }, +}; + +static struct clk_init_data clk_uart1_init = { + .name = "uart1", + .ops = &ios_ops, + .parent_names = std_clk_io_parents, + .num_parents = ARRAY_SIZE(std_clk_io_parents), +}; + +static struct clk_std clk_uart1 = { + .enable_bit = 37, + .hw = { + .init = &clk_uart1_init, + }, +}; + +static struct clk_init_data clk_uart2_init = { + .name = "uart2", + .ops = &ios_ops, + .parent_names = std_clk_io_parents, + .num_parents = ARRAY_SIZE(std_clk_io_parents), +}; + +static struct clk_std clk_uart2 = { + .enable_bit = 38, + .hw = { + .init = &clk_uart2_init, + }, +}; + +static struct clk_init_data clk_usp0_init = { + .name = "usp0", + .ops = &ios_ops, + .parent_names = std_clk_io_parents, + .num_parents = ARRAY_SIZE(std_clk_io_parents), +}; + +static struct clk_std clk_usp0 = { + .enable_bit = 39, + .hw = { + .init = &clk_usp0_init, + }, +}; + +static struct clk_init_data clk_usp1_init = { + .name = "usp1", + .ops = &ios_ops, + .parent_names = std_clk_io_parents, + .num_parents = ARRAY_SIZE(std_clk_io_parents), +}; + +static struct clk_std clk_usp1 = { + .enable_bit = 40, + .hw = { + .init = &clk_usp1_init, + }, +}; + +static struct clk_init_data clk_usp2_init = { + .name = "usp2", + .ops = &ios_ops, + .parent_names = std_clk_io_parents, + .num_parents = ARRAY_SIZE(std_clk_io_parents), +}; + +static struct clk_std clk_usp2 = { + .enable_bit = 41, + .hw = { + .init = &clk_usp2_init, + }, +}; + +static struct clk_init_data clk_vip_init = { + .name = "vip", + .ops = &ios_ops, + .parent_names = std_clk_io_parents, + .num_parents = ARRAY_SIZE(std_clk_io_parents), +}; + +static struct clk_std clk_vip = { + .enable_bit = 42, + .hw = { + .init = &clk_vip_init, + }, +}; + +static struct clk_init_data clk_spi0_init = { + .name = "spi0", + .ops = &ios_ops, + .parent_names = std_clk_io_parents, + .num_parents = ARRAY_SIZE(std_clk_io_parents), +}; + +static struct clk_std clk_spi0 = { + .enable_bit = 43, + .hw = { + .init = &clk_spi0_init, + }, +}; + +static struct clk_init_data clk_spi1_init = { + .name = "spi1", + .ops = &ios_ops, + .parent_names = std_clk_io_parents, + .num_parents = ARRAY_SIZE(std_clk_io_parents), +}; + +static struct clk_std clk_spi1 = { + .enable_bit = 44, + .hw = { + .init = &clk_spi1_init, + }, +}; + +static struct clk_init_data clk_tsc_init = { + .name = "tsc", + .ops = &ios_ops, + .parent_names = std_clk_io_parents, + .num_parents = ARRAY_SIZE(std_clk_io_parents), +}; + +static struct clk_std clk_tsc = { + .enable_bit = 45, + .hw = { + .init = &clk_tsc_init, + }, +}; + +static struct clk_init_data clk_i2c0_init = { + .name = "i2c0", + .ops = &ios_ops, + .parent_names = std_clk_io_parents, + .num_parents = ARRAY_SIZE(std_clk_io_parents), +}; + +static struct clk_std clk_i2c0 = { + .enable_bit = 46, + .hw = { + .init = &clk_i2c0_init, + }, +}; + +static struct clk_init_data clk_i2c1_init = { + .name = "i2c1", + .ops = &ios_ops, + .parent_names = std_clk_io_parents, + .num_parents = ARRAY_SIZE(std_clk_io_parents), +}; + +static struct clk_std clk_i2c1 = { + .enable_bit = 47, + .hw = { + .init = &clk_i2c1_init, + }, +}; + +static struct clk_init_data clk_pwmc_init = { + .name = "pwmc", + .ops = &ios_ops, + .parent_names = std_clk_io_parents, + .num_parents = ARRAY_SIZE(std_clk_io_parents), +}; + +static struct clk_std clk_pwmc = { + .enable_bit = 48, + .hw = { + .init = &clk_pwmc_init, + }, +}; + +static struct clk_init_data clk_efuse_init = { + .name = "efuse", + .ops = &ios_ops, + .parent_names = std_clk_io_parents, + .num_parents = ARRAY_SIZE(std_clk_io_parents), +}; + +static struct clk_std clk_efuse = { + .enable_bit = 49, + .hw = { + .init = &clk_efuse_init, + }, +}; + +static struct clk_init_data clk_pulse_init = { + .name = "pulse", + .ops = &ios_ops, + .parent_names = std_clk_io_parents, + .num_parents = ARRAY_SIZE(std_clk_io_parents), +}; + +static struct clk_std clk_pulse = { + .enable_bit = 50, + .hw = { + .init = &clk_pulse_init, + }, +}; + +static const char *std_clk_dsp_parents[] = { + "dsp", +}; + +static struct clk_init_data clk_gps_init = { + .name = "gps", + .ops = &ios_ops, + .parent_names = std_clk_dsp_parents, + .num_parents = ARRAY_SIZE(std_clk_dsp_parents), +}; + +static struct clk_std clk_gps = { + .enable_bit = 1, + .hw = { + .init = &clk_gps_init, + }, +}; + +static struct clk_init_data clk_mf_init = { + .name = "mf", + .ops = &ios_ops, + .parent_names = std_clk_io_parents, + .num_parents = ARRAY_SIZE(std_clk_io_parents), +}; + +static struct clk_std clk_mf = { + .enable_bit = 2, + .hw = { + .init = &clk_mf_init, + }, +}; + +static const char *std_clk_sys_parents[] = { + "sys", +}; + +static struct clk_init_data clk_security_init = { + .name = "mf", + .ops = &ios_ops, + .parent_names = std_clk_sys_parents, + .num_parents = ARRAY_SIZE(std_clk_sys_parents), +}; + +static struct clk_std clk_security = { + .enable_bit = 19, + .hw = { + .init = &clk_security_init, + }, +}; + +static const char *std_clk_usb_parents[] = { + "usb_pll", +}; + +static struct clk_init_data clk_usb0_init = { + .name = "usb0", + .ops = &ios_ops, + .parent_names = std_clk_usb_parents, + .num_parents = ARRAY_SIZE(std_clk_usb_parents), +}; + +static struct clk_std clk_usb0 = { + .enable_bit = 16, + .hw = { + .init = &clk_usb0_init, + }, +}; + +static struct clk_init_data clk_usb1_init = { + .name = "usb1", + .ops = &ios_ops, + .parent_names = std_clk_usb_parents, + .num_parents = ARRAY_SIZE(std_clk_usb_parents), +}; + +static struct clk_std clk_usb1 = { + .enable_bit = 17, + .hw = { + .init = &clk_usb1_init, + }, +}; + +static struct of_device_id clkc_ids[] = { + { .compatible = "sirf,prima2-clkc" }, + {}, +}; + +static struct of_device_id rsc_ids[] = { + { .compatible = "sirf,prima2-rsc" }, + {}, +}; + +void __init sirfsoc_of_clk_init(void) +{ + struct clk *clk; + struct device_node *np; + + np = of_find_matching_node(NULL, clkc_ids); + if (!np) + panic("unable to find compatible clkc node in dtb\n"); + + sirfsoc_clk_vbase = of_iomap(np, 0); + if (!sirfsoc_clk_vbase) + panic("unable to map clkc registers\n"); + + of_node_put(np); + + np = of_find_matching_node(NULL, rsc_ids); + if (!np) + panic("unable to find compatible rsc node in dtb\n"); + + sirfsoc_rsc_vbase = of_iomap(np, 0); + if (!sirfsoc_rsc_vbase) + panic("unable to map rsc registers\n"); + + of_node_put(np); + + + /* These are always available (RTC and 26MHz OSC)*/ + clk = clk_register_fixed_rate(NULL, "rtc", NULL, + CLK_IS_ROOT, 32768); + BUG_ON(!clk); + clk = clk_register_fixed_rate(NULL, "osc", NULL, + CLK_IS_ROOT, 26000000); + BUG_ON(!clk); + + clk = clk_register(NULL, &clk_pll1.hw); + BUG_ON(!clk); + clk = clk_register(NULL, &clk_pll2.hw); + BUG_ON(!clk); + clk = clk_register(NULL, &clk_pll3.hw); + BUG_ON(!clk); + clk = clk_register(NULL, &clk_mem.hw); + BUG_ON(!clk); + clk = clk_register(NULL, &clk_sys.hw); + BUG_ON(!clk); + clk = clk_register(NULL, &clk_security.hw); + BUG_ON(!clk); + clk_register_clkdev(clk, NULL, "b8030000.security"); + clk = clk_register(NULL, &clk_dsp.hw); + BUG_ON(!clk); + clk = clk_register(NULL, &clk_gps.hw); + BUG_ON(!clk); + clk_register_clkdev(clk, NULL, "a8010000.gps"); + clk = clk_register(NULL, &clk_mf.hw); + BUG_ON(!clk); + clk = clk_register(NULL, &clk_io.hw); + BUG_ON(!clk); + clk_register_clkdev(clk, NULL, "io"); + clk = clk_register(NULL, &clk_cpu.hw); + BUG_ON(!clk); + clk_register_clkdev(clk, NULL, "cpu"); + clk = clk_register(NULL, &clk_uart0.hw); + BUG_ON(!clk); + clk_register_clkdev(clk, NULL, "b0050000.uart"); + clk = clk_register(NULL, &clk_uart1.hw); + BUG_ON(!clk); + clk_register_clkdev(clk, NULL, "b0060000.uart"); + clk = clk_register(NULL, &clk_uart2.hw); + BUG_ON(!clk); + clk_register_clkdev(clk, NULL, "b0070000.uart"); + clk = clk_register(NULL, &clk_tsc.hw); + BUG_ON(!clk); + clk_register_clkdev(clk, NULL, "b0110000.tsc"); + clk = clk_register(NULL, &clk_i2c0.hw); + BUG_ON(!clk); + clk_register_clkdev(clk, NULL, "b00e0000.i2c"); + clk = clk_register(NULL, &clk_i2c1.hw); + BUG_ON(!clk); + clk_register_clkdev(clk, NULL, "b00f0000.i2c"); + clk = clk_register(NULL, &clk_spi0.hw); + BUG_ON(!clk); + clk_register_clkdev(clk, NULL, "b00d0000.spi"); + clk = clk_register(NULL, &clk_spi1.hw); + BUG_ON(!clk); + clk_register_clkdev(clk, NULL, "b0170000.spi"); + clk = clk_register(NULL, &clk_pwmc.hw); + BUG_ON(!clk); + clk_register_clkdev(clk, NULL, "b0130000.pwm"); + clk = clk_register(NULL, &clk_efuse.hw); + BUG_ON(!clk); + clk_register_clkdev(clk, NULL, "b0140000.efusesys"); + clk = clk_register(NULL, &clk_pulse.hw); + BUG_ON(!clk); + clk_register_clkdev(clk, NULL, "b0150000.pulsec"); + clk = clk_register(NULL, &clk_dmac0.hw); + BUG_ON(!clk); + clk_register_clkdev(clk, NULL, "b00b0000.dma-controller"); + clk = clk_register(NULL, &clk_dmac1.hw); + BUG_ON(!clk); + clk_register_clkdev(clk, NULL, "b0160000.dma-controller"); + clk = clk_register(NULL, &clk_nand.hw); + BUG_ON(!clk); + clk_register_clkdev(clk, NULL, "b0030000.nand"); + clk = clk_register(NULL, &clk_audio.hw); + BUG_ON(!clk); + clk_register_clkdev(clk, NULL, "b0040000.audio"); + clk = clk_register(NULL, &clk_usp0.hw); + BUG_ON(!clk); + clk_register_clkdev(clk, NULL, "b0080000.usp"); + clk = clk_register(NULL, &clk_usp1.hw); + BUG_ON(!clk); + clk_register_clkdev(clk, NULL, "b0090000.usp"); + clk = clk_register(NULL, &clk_usp2.hw); + BUG_ON(!clk); + clk_register_clkdev(clk, NULL, "b00a0000.usp"); + clk = clk_register(NULL, &clk_vip.hw); + BUG_ON(!clk); + clk_register_clkdev(clk, NULL, "b00c0000.vip"); + clk = clk_register(NULL, &clk_gfx.hw); + BUG_ON(!clk); + clk_register_clkdev(clk, NULL, "98000000.graphics"); + clk = clk_register(NULL, &clk_mm.hw); + BUG_ON(!clk); + clk_register_clkdev(clk, NULL, "a0000000.multimedia"); + clk = clk_register(NULL, &clk_lcd.hw); + BUG_ON(!clk); + clk_register_clkdev(clk, NULL, "90010000.display"); + clk = clk_register(NULL, &clk_vpp.hw); + BUG_ON(!clk); + clk_register_clkdev(clk, NULL, "90020000.vpp"); + clk = clk_register(NULL, &clk_mmc01.hw); + BUG_ON(!clk); + clk = clk_register(NULL, &clk_mmc23.hw); + BUG_ON(!clk); + clk = clk_register(NULL, &clk_mmc45.hw); + BUG_ON(!clk); + clk = clk_register(NULL, &usb_pll_clk_hw); + BUG_ON(!clk); + clk = clk_register(NULL, &clk_usb0.hw); + BUG_ON(!clk); + clk_register_clkdev(clk, NULL, "b00e0000.usb"); + clk = clk_register(NULL, &clk_usb1.hw); + BUG_ON(!clk); + clk_register_clkdev(clk, NULL, "b00f0000.usb"); +} diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index efdfd009c27..56e4495ebeb 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -558,25 +558,6 @@ int clk_enable(struct clk *clk) EXPORT_SYMBOL_GPL(clk_enable); /** - * clk_get_rate - return the rate of clk - * @clk: the clk whose rate is being returned - * - * Simply returns the cached rate of the clk. Does not query the hardware. If - * clk is NULL then returns 0. - */ -unsigned long clk_get_rate(struct clk *clk) -{ - unsigned long rate; - - mutex_lock(&prepare_lock); - rate = __clk_get_rate(clk); - mutex_unlock(&prepare_lock); - - return rate; -} -EXPORT_SYMBOL_GPL(clk_get_rate); - -/** * __clk_round_rate - round the given rate for a clk * @clk: round the rate of this clock * @@ -702,6 +683,30 @@ static void __clk_recalc_rates(struct clk *clk, unsigned long msg) } /** + * clk_get_rate - return the rate of clk + * @clk: the clk whose rate is being returned + * + * Simply returns the cached rate of the clk, unless CLK_GET_RATE_NOCACHE flag + * is set, which means a recalc_rate will be issued. + * If clk is NULL then returns 0. + */ +unsigned long clk_get_rate(struct clk *clk) +{ + unsigned long rate; + + mutex_lock(&prepare_lock); + + if (clk && (clk->flags & CLK_GET_RATE_NOCACHE)) + __clk_recalc_rates(clk, 0); + + rate = __clk_get_rate(clk); + mutex_unlock(&prepare_lock); + + return rate; +} +EXPORT_SYMBOL_GPL(clk_get_rate); + +/** * __clk_speculate_rates * @clk: first clk in the subtree * @parent_rate: the "future" rate of clk's parent @@ -1582,6 +1587,20 @@ struct clk *of_clk_src_simple_get(struct of_phandle_args *clkspec, } EXPORT_SYMBOL_GPL(of_clk_src_simple_get); +struct clk *of_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data) +{ + struct clk_onecell_data *clk_data = data; + unsigned int idx = clkspec->args[0]; + + if (idx >= clk_data->clk_num) { + pr_err("%s: invalid clock index %d\n", __func__, idx); + return ERR_PTR(-EINVAL); + } + + return clk_data->clks[idx]; +} +EXPORT_SYMBOL_GPL(of_clk_src_onecell_get); + /** * of_clk_add_provider() - Register a clock provider for a node * @np: Device node pointer associated with clock provider diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile new file mode 100644 index 00000000000..392d78044ce --- /dev/null +++ b/drivers/clk/mmp/Makefile @@ -0,0 +1,9 @@ +# +# Makefile for mmp specific clk +# + +obj-y += clk-apbc.o clk-apmu.o clk-frac.o + +obj-$(CONFIG_CPU_PXA168) += clk-pxa168.o +obj-$(CONFIG_CPU_PXA910) += clk-pxa910.o +obj-$(CONFIG_CPU_MMP2) += clk-mmp2.o diff --git a/drivers/clk/mmp/clk-apbc.c b/drivers/clk/mmp/clk-apbc.c new file mode 100644 index 00000000000..d14120eaa71 --- /dev/null +++ b/drivers/clk/mmp/clk-apbc.c @@ -0,0 +1,152 @@ +/* + * mmp APB clock operation source file + * + * Copyright (C) 2012 Marvell + * Chao Xie <xiechao.mail@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/delay.h> +#include <linux/slab.h> + +#include "clk.h" + +/* Common APB clock register bit definitions */ +#define APBC_APBCLK (1 << 0) /* APB Bus Clock Enable */ +#define APBC_FNCLK (1 << 1) /* Functional Clock Enable */ +#define APBC_RST (1 << 2) /* Reset Generation */ +#define APBC_POWER (1 << 7) /* Reset Generation */ + +#define to_clk_apbc(hw) container_of(hw, struct clk_apbc, hw) +struct clk_apbc { + struct clk_hw hw; + void __iomem *base; + unsigned int delay; + unsigned int flags; + spinlock_t *lock; +}; + +static int clk_apbc_prepare(struct clk_hw *hw) +{ + struct clk_apbc *apbc = to_clk_apbc(hw); + unsigned int data; + unsigned long flags = 0; + + /* + * It may share same register as MUX clock, + * and it will impact FNCLK enable. Spinlock is needed + */ + if (apbc->lock) + spin_lock_irqsave(apbc->lock, flags); + + data = readl_relaxed(apbc->base); + if (apbc->flags & APBC_POWER_CTRL) + data |= APBC_POWER; + data |= APBC_FNCLK; + writel_relaxed(data, apbc->base); + + if (apbc->lock) + spin_unlock_irqrestore(apbc->lock, flags); + + udelay(apbc->delay); + + if (apbc->lock) + spin_lock_irqsave(apbc->lock, flags); + + data = readl_relaxed(apbc->base); + data |= APBC_APBCLK; + writel_relaxed(data, apbc->base); + + if (apbc->lock) + spin_unlock_irqrestore(apbc->lock, flags); + + udelay(apbc->delay); + + if (!(apbc->flags & APBC_NO_BUS_CTRL)) { + if (apbc->lock) + spin_lock_irqsave(apbc->lock, flags); + + data = readl_relaxed(apbc->base); + data &= ~APBC_RST; + writel_relaxed(data, apbc->base); + + if (apbc->lock) + spin_unlock_irqrestore(apbc->lock, flags); + } + + return 0; +} + +static void clk_apbc_unprepare(struct clk_hw *hw) +{ + struct clk_apbc *apbc = to_clk_apbc(hw); + unsigned long data; + unsigned long flags = 0; + + if (apbc->lock) + spin_lock_irqsave(apbc->lock, flags); + + data = readl_relaxed(apbc->base); + if (apbc->flags & APBC_POWER_CTRL) + data &= ~APBC_POWER; + data &= ~APBC_FNCLK; + writel_relaxed(data, apbc->base); + + if (apbc->lock) + spin_unlock_irqrestore(apbc->lock, flags); + + udelay(10); + + if (apbc->lock) + spin_lock_irqsave(apbc->lock, flags); + + data = readl_relaxed(apbc->base); + data &= ~APBC_APBCLK; + writel_relaxed(data, apbc->base); + + if (apbc->lock) + spin_unlock_irqrestore(apbc->lock, flags); +} + +struct clk_ops clk_apbc_ops = { + .prepare = clk_apbc_prepare, + .unprepare = clk_apbc_unprepare, +}; + +struct clk *mmp_clk_register_apbc(const char *name, const char *parent_name, + void __iomem *base, unsigned int delay, + unsigned int apbc_flags, spinlock_t *lock) +{ + struct clk_apbc *apbc; + struct clk *clk; + struct clk_init_data init; + + apbc = kzalloc(sizeof(*apbc), GFP_KERNEL); + if (!apbc) + return NULL; + + init.name = name; + init.ops = &clk_apbc_ops; + init.flags = CLK_SET_RATE_PARENT; + init.parent_names = (parent_name ? &parent_name : NULL); + init.num_parents = (parent_name ? 1 : 0); + + apbc->base = base; + apbc->delay = delay; + apbc->flags = apbc_flags; + apbc->lock = lock; + apbc->hw.init = &init; + + clk = clk_register(NULL, &apbc->hw); + if (IS_ERR(clk)) + kfree(apbc); + + return clk; +} diff --git a/drivers/clk/mmp/clk-apmu.c b/drivers/clk/mmp/clk-apmu.c new file mode 100644 index 00000000000..abe182b2377 --- /dev/null +++ b/drivers/clk/mmp/clk-apmu.c @@ -0,0 +1,97 @@ +/* + * mmp AXI peripharal clock operation source file + * + * Copyright (C) 2012 Marvell + * Chao Xie <xiechao.mail@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/delay.h> +#include <linux/slab.h> + +#include "clk.h" + +#define to_clk_apmu(clk) (container_of(clk, struct clk_apmu, clk)) +struct clk_apmu { + struct clk_hw hw; + void __iomem *base; + u32 rst_mask; + u32 enable_mask; + spinlock_t *lock; +}; + +static int clk_apmu_enable(struct clk_hw *hw) +{ + struct clk_apmu *apmu = to_clk_apmu(hw); + unsigned long data; + unsigned long flags = 0; + + if (apmu->lock) + spin_lock_irqsave(apmu->lock, flags); + + data = readl_relaxed(apmu->base) | apmu->enable_mask; + writel_relaxed(data, apmu->base); + + if (apmu->lock) + spin_unlock_irqrestore(apmu->lock, flags); + + return 0; +} + +static void clk_apmu_disable(struct clk_hw *hw) +{ + struct clk_apmu *apmu = to_clk_apmu(hw); + unsigned long data; + unsigned long flags = 0; + + if (apmu->lock) + spin_lock_irqsave(apmu->lock, flags); + + data = readl_relaxed(apmu->base) & ~apmu->enable_mask; + writel_relaxed(data, apmu->base); + + if (apmu->lock) + spin_unlock_irqrestore(apmu->lock, flags); +} + +struct clk_ops clk_apmu_ops = { + .enable = clk_apmu_enable, + .disable = clk_apmu_disable, +}; + +struct clk *mmp_clk_register_apmu(const char *name, const char *parent_name, + void __iomem *base, u32 enable_mask, spinlock_t *lock) +{ + struct clk_apmu *apmu; + struct clk *clk; + struct clk_init_data init; + + apmu = kzalloc(sizeof(*apmu), GFP_KERNEL); + if (!apmu) + return NULL; + + init.name = name; + init.ops = &clk_apmu_ops; + init.flags = CLK_SET_RATE_PARENT; + init.parent_names = (parent_name ? &parent_name : NULL); + init.num_parents = (parent_name ? 1 : 0); + + apmu->base = base; + apmu->enable_mask = enable_mask; + apmu->lock = lock; + apmu->hw.init = &init; + + clk = clk_register(NULL, &apmu->hw); + + if (IS_ERR(clk)) + kfree(apmu); + + return clk; +} diff --git a/drivers/clk/mmp/clk-frac.c b/drivers/clk/mmp/clk-frac.c new file mode 100644 index 00000000000..80c1dd15d15 --- /dev/null +++ b/drivers/clk/mmp/clk-frac.c @@ -0,0 +1,153 @@ +/* + * mmp factor clock operation source file + * + * Copyright (C) 2012 Marvell + * Chao Xie <xiechao.mail@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/clk-provider.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/err.h> + +#include "clk.h" +/* + * It is M/N clock + * + * Fout from synthesizer can be given from two equations: + * numerator/denominator = Fin / (Fout * factor) + */ + +#define to_clk_factor(hw) container_of(hw, struct clk_factor, hw) +struct clk_factor { + struct clk_hw hw; + void __iomem *base; + struct clk_factor_masks *masks; + struct clk_factor_tbl *ftbl; + unsigned int ftbl_cnt; +}; + +static long clk_factor_round_rate(struct clk_hw *hw, unsigned long drate, + unsigned long *prate) +{ + struct clk_factor *factor = to_clk_factor(hw); + unsigned long rate = 0, prev_rate; + int i; + + for (i = 0; i < factor->ftbl_cnt; i++) { + prev_rate = rate; + rate = (((*prate / 10000) * factor->ftbl[i].num) / + (factor->ftbl[i].den * factor->masks->factor)) * 10000; + if (rate > drate) + break; + } + if (i == 0) + return rate; + else + return prev_rate; +} + +static unsigned long clk_factor_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_factor *factor = to_clk_factor(hw); + struct clk_factor_masks *masks = factor->masks; + unsigned int val, num, den; + + val = readl_relaxed(factor->base); + + /* calculate numerator */ + num = (val >> masks->num_shift) & masks->num_mask; + + /* calculate denominator */ + den = (val >> masks->den_shift) & masks->num_mask; + + if (!den) + return 0; + + return (((parent_rate / 10000) * den) / + (num * factor->masks->factor)) * 10000; +} + +/* Configures new clock rate*/ +static int clk_factor_set_rate(struct clk_hw *hw, unsigned long drate, + unsigned long prate) +{ + struct clk_factor *factor = to_clk_factor(hw); + struct clk_factor_masks *masks = factor->masks; + int i; + unsigned long val; + unsigned long prev_rate, rate = 0; + + for (i = 0; i < factor->ftbl_cnt; i++) { + prev_rate = rate; + rate = (((prate / 10000) * factor->ftbl[i].num) / + (factor->ftbl[i].den * factor->masks->factor)) * 10000; + if (rate > drate) + break; + } + if (i > 0) + i--; + + val = readl_relaxed(factor->base); + + val &= ~(masks->num_mask << masks->num_shift); + val |= (factor->ftbl[i].num & masks->num_mask) << masks->num_shift; + + val &= ~(masks->den_mask << masks->den_shift); + val |= (factor->ftbl[i].den & masks->den_mask) << masks->den_shift; + + writel_relaxed(val, factor->base); + + return 0; +} + +static struct clk_ops clk_factor_ops = { + .recalc_rate = clk_factor_recalc_rate, + .round_rate = clk_factor_round_rate, + .set_rate = clk_factor_set_rate, +}; + +struct clk *mmp_clk_register_factor(const char *name, const char *parent_name, + unsigned long flags, void __iomem *base, + struct clk_factor_masks *masks, struct clk_factor_tbl *ftbl, + unsigned int ftbl_cnt) +{ + struct clk_factor *factor; + struct clk_init_data init; + struct clk *clk; + + if (!masks) { + pr_err("%s: must pass a clk_factor_mask\n", __func__); + return ERR_PTR(-EINVAL); + } + + factor = kzalloc(sizeof(*factor), GFP_KERNEL); + if (!factor) { + pr_err("%s: could not allocate factor clk\n", __func__); + return ERR_PTR(-ENOMEM); + } + + /* struct clk_aux assignments */ + factor->base = base; + factor->masks = masks; + factor->ftbl = ftbl; + factor->ftbl_cnt = ftbl_cnt; + factor->hw.init = &init; + + init.name = name; + init.ops = &clk_factor_ops; + init.flags = flags; + init.parent_names = &parent_name; + init.num_parents = 1; + + clk = clk_register(NULL, &factor->hw); + if (IS_ERR_OR_NULL(clk)) + kfree(factor); + + return clk; +} diff --git a/drivers/clk/mmp/clk-mmp2.c b/drivers/clk/mmp/clk-mmp2.c new file mode 100644 index 00000000000..ade435820c7 --- /dev/null +++ b/drivers/clk/mmp/clk-mmp2.c @@ -0,0 +1,449 @@ +/* + * mmp2 clock framework source file + * + * Copyright (C) 2012 Marvell + * Chao Xie <xiechao.mail@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/spinlock.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/err.h> + +#include <mach/addr-map.h> + +#include "clk.h" + +#define APBC_RTC 0x0 +#define APBC_TWSI0 0x4 +#define APBC_TWSI1 0x8 +#define APBC_TWSI2 0xc +#define APBC_TWSI3 0x10 +#define APBC_TWSI4 0x7c +#define APBC_TWSI5 0x80 +#define APBC_KPC 0x18 +#define APBC_UART0 0x2c +#define APBC_UART1 0x30 +#define APBC_UART2 0x34 +#define APBC_UART3 0x88 +#define APBC_GPIO 0x38 +#define APBC_PWM0 0x3c +#define APBC_PWM1 0x40 +#define APBC_PWM2 0x44 +#define APBC_PWM3 0x48 +#define APBC_SSP0 0x50 +#define APBC_SSP1 0x54 +#define APBC_SSP2 0x58 +#define APBC_SSP3 0x5c +#define APMU_SDH0 0x54 +#define APMU_SDH1 0x58 +#define APMU_SDH2 0xe8 +#define APMU_SDH3 0xec +#define APMU_USB 0x5c +#define APMU_DISP0 0x4c +#define APMU_DISP1 0x110 +#define APMU_CCIC0 0x50 +#define APMU_CCIC1 0xf4 +#define MPMU_UART_PLL 0x14 + +static DEFINE_SPINLOCK(clk_lock); + +static struct clk_factor_masks uart_factor_masks = { + .factor = 2, + .num_mask = 0x1fff, + .den_mask = 0x1fff, + .num_shift = 16, + .den_shift = 0, +}; + +static struct clk_factor_tbl uart_factor_tbl[] = { + {.num = 14634, .den = 2165}, /*14.745MHZ */ + {.num = 3521, .den = 689}, /*19.23MHZ */ + {.num = 9679, .den = 5728}, /*58.9824MHZ */ + {.num = 15850, .den = 9451}, /*59.429MHZ */ +}; + +static const char *uart_parent[] = {"uart_pll", "vctcxo"}; +static const char *ssp_parent[] = {"vctcxo_4", "vctcxo_2", "vctcxo", "pll1_16"}; +static const char *sdh_parent[] = {"pll1_4", "pll2", "usb_pll", "pll1"}; +static const char *disp_parent[] = {"pll1", "pll1_16", "pll2", "vctcxo"}; +static const char *ccic_parent[] = {"pll1_2", "pll1_16", "vctcxo"}; + +void __init mmp2_clk_init(void) +{ + struct clk *clk; + struct clk *vctcxo; + void __iomem *mpmu_base; + void __iomem *apmu_base; + void __iomem *apbc_base; + + mpmu_base = ioremap(APB_PHYS_BASE + 0x50000, SZ_4K); + if (mpmu_base == NULL) { + pr_err("error to ioremap MPMU base\n"); + return; + } + + apmu_base = ioremap(AXI_PHYS_BASE + 0x82800, SZ_4K); + if (apmu_base == NULL) { + pr_err("error to ioremap APMU base\n"); + return; + } + + apbc_base = ioremap(APB_PHYS_BASE + 0x15000, SZ_4K); + if (apbc_base == NULL) { + pr_err("error to ioremap APBC base\n"); + return; + } + + clk = clk_register_fixed_rate(NULL, "clk32", NULL, CLK_IS_ROOT, 3200); + clk_register_clkdev(clk, "clk32", NULL); + + vctcxo = clk_register_fixed_rate(NULL, "vctcxo", NULL, CLK_IS_ROOT, + 26000000); + clk_register_clkdev(vctcxo, "vctcxo", NULL); + + clk = clk_register_fixed_rate(NULL, "pll1", NULL, CLK_IS_ROOT, + 800000000); + clk_register_clkdev(clk, "pll1", NULL); + + clk = clk_register_fixed_rate(NULL, "usb_pll", NULL, CLK_IS_ROOT, + 480000000); + clk_register_clkdev(clk, "usb_pll", NULL); + + clk = clk_register_fixed_rate(NULL, "pll2", NULL, CLK_IS_ROOT, + 960000000); + clk_register_clkdev(clk, "pll2", NULL); + + clk = clk_register_fixed_factor(NULL, "pll1_2", "pll1", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll1_2", NULL); + + clk = clk_register_fixed_factor(NULL, "pll1_4", "pll1_2", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll1_4", NULL); + + clk = clk_register_fixed_factor(NULL, "pll1_8", "pll1_4", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll1_8", NULL); + + clk = clk_register_fixed_factor(NULL, "pll1_16", "pll1_8", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll1_16", NULL); + + clk = clk_register_fixed_factor(NULL, "pll1_20", "pll1_4", + CLK_SET_RATE_PARENT, 1, 5); + clk_register_clkdev(clk, "pll1_20", NULL); + + clk = clk_register_fixed_factor(NULL, "pll1_3", "pll1", + CLK_SET_RATE_PARENT, 1, 3); + clk_register_clkdev(clk, "pll1_3", NULL); + + clk = clk_register_fixed_factor(NULL, "pll1_6", "pll1_3", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll1_6", NULL); + + clk = clk_register_fixed_factor(NULL, "pll1_12", "pll1_6", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll1_12", NULL); + + clk = clk_register_fixed_factor(NULL, "pll2_2", "pll2", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll2_2", NULL); + + clk = clk_register_fixed_factor(NULL, "pll2_4", "pll2_2", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll2_4", NULL); + + clk = clk_register_fixed_factor(NULL, "pll2_8", "pll2_4", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll2_8", NULL); + + clk = clk_register_fixed_factor(NULL, "pll2_16", "pll2_8", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll2_16", NULL); + + clk = clk_register_fixed_factor(NULL, "pll2_3", "pll2", + CLK_SET_RATE_PARENT, 1, 3); + clk_register_clkdev(clk, "pll2_3", NULL); + + clk = clk_register_fixed_factor(NULL, "pll2_6", "pll2_3", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll2_6", NULL); + + clk = clk_register_fixed_factor(NULL, "pll2_12", "pll2_6", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll2_12", NULL); + + clk = clk_register_fixed_factor(NULL, "vctcxo_2", "vctcxo", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "vctcxo_2", NULL); + + clk = clk_register_fixed_factor(NULL, "vctcxo_4", "vctcxo_2", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "vctcxo_4", NULL); + + clk = mmp_clk_register_factor("uart_pll", "pll1_4", 0, + mpmu_base + MPMU_UART_PLL, + &uart_factor_masks, uart_factor_tbl, + ARRAY_SIZE(uart_factor_tbl)); + clk_set_rate(clk, 14745600); + clk_register_clkdev(clk, "uart_pll", NULL); + + clk = mmp_clk_register_apbc("twsi0", "vctcxo", + apbc_base + APBC_TWSI0, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa2xx-i2c.0"); + + clk = mmp_clk_register_apbc("twsi1", "vctcxo", + apbc_base + APBC_TWSI1, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa2xx-i2c.1"); + + clk = mmp_clk_register_apbc("twsi2", "vctcxo", + apbc_base + APBC_TWSI2, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa2xx-i2c.2"); + + clk = mmp_clk_register_apbc("twsi3", "vctcxo", + apbc_base + APBC_TWSI3, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa2xx-i2c.3"); + + clk = mmp_clk_register_apbc("twsi4", "vctcxo", + apbc_base + APBC_TWSI4, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa2xx-i2c.4"); + + clk = mmp_clk_register_apbc("twsi5", "vctcxo", + apbc_base + APBC_TWSI5, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa2xx-i2c.5"); + + clk = mmp_clk_register_apbc("gpio", "vctcxo", + apbc_base + APBC_GPIO, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa-gpio"); + + clk = mmp_clk_register_apbc("kpc", "clk32", + apbc_base + APBC_KPC, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa27x-keypad"); + + clk = mmp_clk_register_apbc("rtc", "clk32", + apbc_base + APBC_RTC, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "mmp-rtc"); + + clk = mmp_clk_register_apbc("pwm0", "vctcxo", + apbc_base + APBC_PWM0, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "mmp2-pwm.0"); + + clk = mmp_clk_register_apbc("pwm1", "vctcxo", + apbc_base + APBC_PWM1, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "mmp2-pwm.1"); + + clk = mmp_clk_register_apbc("pwm2", "vctcxo", + apbc_base + APBC_PWM2, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "mmp2-pwm.2"); + + clk = mmp_clk_register_apbc("pwm3", "vctcxo", + apbc_base + APBC_PWM3, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "mmp2-pwm.3"); + + clk = clk_register_mux(NULL, "uart0_mux", uart_parent, + ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT, + apbc_base + APBC_UART0, 4, 3, 0, &clk_lock); + clk_set_parent(clk, vctcxo); + clk_register_clkdev(clk, "uart_mux.0", NULL); + + clk = mmp_clk_register_apbc("uart0", "uart0_mux", + apbc_base + APBC_UART0, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa2xx-uart.0"); + + clk = clk_register_mux(NULL, "uart1_mux", uart_parent, + ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT, + apbc_base + APBC_UART1, 4, 3, 0, &clk_lock); + clk_set_parent(clk, vctcxo); + clk_register_clkdev(clk, "uart_mux.1", NULL); + + clk = mmp_clk_register_apbc("uart1", "uart1_mux", + apbc_base + APBC_UART1, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa2xx-uart.1"); + + clk = clk_register_mux(NULL, "uart2_mux", uart_parent, + ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT, + apbc_base + APBC_UART2, 4, 3, 0, &clk_lock); + clk_set_parent(clk, vctcxo); + clk_register_clkdev(clk, "uart_mux.2", NULL); + + clk = mmp_clk_register_apbc("uart2", "uart2_mux", + apbc_base + APBC_UART2, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa2xx-uart.2"); + + clk = clk_register_mux(NULL, "uart3_mux", uart_parent, + ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT, + apbc_base + APBC_UART3, 4, 3, 0, &clk_lock); + clk_set_parent(clk, vctcxo); + clk_register_clkdev(clk, "uart_mux.3", NULL); + + clk = mmp_clk_register_apbc("uart3", "uart3_mux", + apbc_base + APBC_UART3, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa2xx-uart.3"); + + clk = clk_register_mux(NULL, "ssp0_mux", ssp_parent, + ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT, + apbc_base + APBC_SSP0, 4, 3, 0, &clk_lock); + clk_register_clkdev(clk, "uart_mux.0", NULL); + + clk = mmp_clk_register_apbc("ssp0", "ssp0_mux", + apbc_base + APBC_SSP0, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "mmp-ssp.0"); + + clk = clk_register_mux(NULL, "ssp1_mux", ssp_parent, + ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT, + apbc_base + APBC_SSP1, 4, 3, 0, &clk_lock); + clk_register_clkdev(clk, "ssp_mux.1", NULL); + + clk = mmp_clk_register_apbc("ssp1", "ssp1_mux", + apbc_base + APBC_SSP1, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "mmp-ssp.1"); + + clk = clk_register_mux(NULL, "ssp2_mux", ssp_parent, + ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT, + apbc_base + APBC_SSP2, 4, 3, 0, &clk_lock); + clk_register_clkdev(clk, "ssp_mux.2", NULL); + + clk = mmp_clk_register_apbc("ssp2", "ssp2_mux", + apbc_base + APBC_SSP2, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "mmp-ssp.2"); + + clk = clk_register_mux(NULL, "ssp3_mux", ssp_parent, + ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT, + apbc_base + APBC_SSP3, 4, 3, 0, &clk_lock); + clk_register_clkdev(clk, "ssp_mux.3", NULL); + + clk = mmp_clk_register_apbc("ssp3", "ssp3_mux", + apbc_base + APBC_SSP3, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "mmp-ssp.3"); + + clk = clk_register_mux(NULL, "sdh_mux", sdh_parent, + ARRAY_SIZE(sdh_parent), CLK_SET_RATE_PARENT, + apmu_base + APMU_SDH0, 8, 2, 0, &clk_lock); + clk_register_clkdev(clk, "sdh_mux", NULL); + + clk = clk_register_divider(NULL, "sdh_div", "sdh_mux", + CLK_SET_RATE_PARENT, apmu_base + APMU_SDH0, + 10, 4, CLK_DIVIDER_ONE_BASED, &clk_lock); + clk_register_clkdev(clk, "sdh_div", NULL); + + clk = mmp_clk_register_apmu("sdh0", "sdh_div", apmu_base + APMU_SDH0, + 0x1b, &clk_lock); + clk_register_clkdev(clk, NULL, "sdhci-pxav3.0"); + + clk = mmp_clk_register_apmu("sdh1", "sdh_div", apmu_base + APMU_SDH1, + 0x1b, &clk_lock); + clk_register_clkdev(clk, NULL, "sdhci-pxav3.1"); + + clk = mmp_clk_register_apmu("sdh2", "sdh_div", apmu_base + APMU_SDH2, + 0x1b, &clk_lock); + clk_register_clkdev(clk, NULL, "sdhci-pxav3.2"); + + clk = mmp_clk_register_apmu("sdh3", "sdh_div", apmu_base + APMU_SDH3, + 0x1b, &clk_lock); + clk_register_clkdev(clk, NULL, "sdhci-pxav3.3"); + + clk = mmp_clk_register_apmu("usb", "usb_pll", apmu_base + APMU_USB, + 0x9, &clk_lock); + clk_register_clkdev(clk, "usb_clk", NULL); + + clk = clk_register_mux(NULL, "disp0_mux", disp_parent, + ARRAY_SIZE(disp_parent), CLK_SET_RATE_PARENT, + apmu_base + APMU_DISP0, 6, 2, 0, &clk_lock); + clk_register_clkdev(clk, "disp_mux.0", NULL); + + clk = clk_register_divider(NULL, "disp0_div", "disp0_mux", + CLK_SET_RATE_PARENT, apmu_base + APMU_DISP0, + 8, 4, CLK_DIVIDER_ONE_BASED, &clk_lock); + clk_register_clkdev(clk, "disp_div.0", NULL); + + clk = mmp_clk_register_apmu("disp0", "disp0_div", + apmu_base + APMU_DISP0, 0x1b, &clk_lock); + clk_register_clkdev(clk, NULL, "mmp-disp.0"); + + clk = clk_register_divider(NULL, "disp0_sphy_div", "disp0_mux", 0, + apmu_base + APMU_DISP0, 15, 5, 0, &clk_lock); + clk_register_clkdev(clk, "disp_sphy_div.0", NULL); + + clk = mmp_clk_register_apmu("disp0_sphy", "disp0_sphy_div", + apmu_base + APMU_DISP0, 0x1024, &clk_lock); + clk_register_clkdev(clk, "disp_sphy.0", NULL); + + clk = clk_register_mux(NULL, "disp1_mux", disp_parent, + ARRAY_SIZE(disp_parent), CLK_SET_RATE_PARENT, + apmu_base + APMU_DISP1, 6, 2, 0, &clk_lock); + clk_register_clkdev(clk, "disp_mux.1", NULL); + + clk = clk_register_divider(NULL, "disp1_div", "disp1_mux", + CLK_SET_RATE_PARENT, apmu_base + APMU_DISP1, + 8, 4, CLK_DIVIDER_ONE_BASED, &clk_lock); + clk_register_clkdev(clk, "disp_div.1", NULL); + + clk = mmp_clk_register_apmu("disp1", "disp1_div", + apmu_base + APMU_DISP1, 0x1b, &clk_lock); + clk_register_clkdev(clk, NULL, "mmp-disp.1"); + + clk = mmp_clk_register_apmu("ccic_arbiter", "vctcxo", + apmu_base + APMU_CCIC0, 0x1800, &clk_lock); + clk_register_clkdev(clk, "ccic_arbiter", NULL); + + clk = clk_register_mux(NULL, "ccic0_mux", ccic_parent, + ARRAY_SIZE(ccic_parent), CLK_SET_RATE_PARENT, + apmu_base + APMU_CCIC0, 6, 2, 0, &clk_lock); + clk_register_clkdev(clk, "ccic_mux.0", NULL); + + clk = clk_register_divider(NULL, "ccic0_div", "ccic0_mux", + CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC0, + 17, 4, CLK_DIVIDER_ONE_BASED, &clk_lock); + clk_register_clkdev(clk, "ccic_div.0", NULL); + + clk = mmp_clk_register_apmu("ccic0", "ccic0_div", + apmu_base + APMU_CCIC0, 0x1b, &clk_lock); + clk_register_clkdev(clk, "fnclk", "mmp-ccic.0"); + + clk = mmp_clk_register_apmu("ccic0_phy", "ccic0_div", + apmu_base + APMU_CCIC0, 0x24, &clk_lock); + clk_register_clkdev(clk, "phyclk", "mmp-ccic.0"); + + clk = clk_register_divider(NULL, "ccic0_sphy_div", "ccic0_div", + CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC0, + 10, 5, 0, &clk_lock); + clk_register_clkdev(clk, "sphyclk_div", "mmp-ccic.0"); + + clk = mmp_clk_register_apmu("ccic0_sphy", "ccic0_sphy_div", + apmu_base + APMU_CCIC0, 0x300, &clk_lock); + clk_register_clkdev(clk, "sphyclk", "mmp-ccic.0"); + + clk = clk_register_mux(NULL, "ccic1_mux", ccic_parent, + ARRAY_SIZE(ccic_parent), CLK_SET_RATE_PARENT, + apmu_base + APMU_CCIC1, 6, 2, 0, &clk_lock); + clk_register_clkdev(clk, "ccic_mux.1", NULL); + + clk = clk_register_divider(NULL, "ccic1_div", "ccic1_mux", + CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC1, + 16, 4, CLK_DIVIDER_ONE_BASED, &clk_lock); + clk_register_clkdev(clk, "ccic_div.1", NULL); + + clk = mmp_clk_register_apmu("ccic1", "ccic1_div", + apmu_base + APMU_CCIC1, 0x1b, &clk_lock); + clk_register_clkdev(clk, "fnclk", "mmp-ccic.1"); + + clk = mmp_clk_register_apmu("ccic1_phy", "ccic1_div", + apmu_base + APMU_CCIC1, 0x24, &clk_lock); + clk_register_clkdev(clk, "phyclk", "mmp-ccic.1"); + + clk = clk_register_divider(NULL, "ccic1_sphy_div", "ccic1_div", + CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC1, + 10, 5, 0, &clk_lock); + clk_register_clkdev(clk, "sphyclk_div", "mmp-ccic.1"); + + clk = mmp_clk_register_apmu("ccic1_sphy", "ccic1_sphy_div", + apmu_base + APMU_CCIC1, 0x300, &clk_lock); + clk_register_clkdev(clk, "sphyclk", "mmp-ccic.1"); +} diff --git a/drivers/clk/mmp/clk-pxa168.c b/drivers/clk/mmp/clk-pxa168.c new file mode 100644 index 00000000000..e8d036c12cb --- /dev/null +++ b/drivers/clk/mmp/clk-pxa168.c @@ -0,0 +1,346 @@ +/* + * pxa168 clock framework source file + * + * Copyright (C) 2012 Marvell + * Chao Xie <xiechao.mail@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/spinlock.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/err.h> + +#include <mach/addr-map.h> + +#include "clk.h" + +#define APBC_RTC 0x28 +#define APBC_TWSI0 0x2c +#define APBC_KPC 0x30 +#define APBC_UART0 0x0 +#define APBC_UART1 0x4 +#define APBC_GPIO 0x8 +#define APBC_PWM0 0xc +#define APBC_PWM1 0x10 +#define APBC_PWM2 0x14 +#define APBC_PWM3 0x18 +#define APBC_SSP0 0x81c +#define APBC_SSP1 0x820 +#define APBC_SSP2 0x84c +#define APBC_SSP3 0x858 +#define APBC_SSP4 0x85c +#define APBC_TWSI1 0x6c +#define APBC_UART2 0x70 +#define APMU_SDH0 0x54 +#define APMU_SDH1 0x58 +#define APMU_USB 0x5c +#define APMU_DISP0 0x4c +#define APMU_CCIC0 0x50 +#define APMU_DFC 0x60 +#define MPMU_UART_PLL 0x14 + +static DEFINE_SPINLOCK(clk_lock); + +static struct clk_factor_masks uart_factor_masks = { + .factor = 2, + .num_mask = 0x1fff, + .den_mask = 0x1fff, + .num_shift = 16, + .den_shift = 0, +}; + +static struct clk_factor_tbl uart_factor_tbl[] = { + {.num = 8125, .den = 1536}, /*14.745MHZ */ +}; + +static const char *uart_parent[] = {"pll1_3_16", "uart_pll"}; +static const char *ssp_parent[] = {"pll1_96", "pll1_48", "pll1_24", "pll1_12"}; +static const char *sdh_parent[] = {"pll1_12", "pll1_13"}; +static const char *disp_parent[] = {"pll1_2", "pll1_12"}; +static const char *ccic_parent[] = {"pll1_2", "pll1_12"}; +static const char *ccic_phy_parent[] = {"pll1_6", "pll1_12"}; + +void __init pxa168_clk_init(void) +{ + struct clk *clk; + struct clk *uart_pll; + void __iomem *mpmu_base; + void __iomem *apmu_base; + void __iomem *apbc_base; + + mpmu_base = ioremap(APB_PHYS_BASE + 0x50000, SZ_4K); + if (mpmu_base == NULL) { + pr_err("error to ioremap MPMU base\n"); + return; + } + + apmu_base = ioremap(AXI_PHYS_BASE + 0x82800, SZ_4K); + if (apmu_base == NULL) { + pr_err("error to ioremap APMU base\n"); + return; + } + + apbc_base = ioremap(APB_PHYS_BASE + 0x15000, SZ_4K); + if (apbc_base == NULL) { + pr_err("error to ioremap APBC base\n"); + return; + } + + clk = clk_register_fixed_rate(NULL, "clk32", NULL, CLK_IS_ROOT, 3200); + clk_register_clkdev(clk, "clk32", NULL); + + clk = clk_register_fixed_rate(NULL, "vctcxo", NULL, CLK_IS_ROOT, + 26000000); + clk_register_clkdev(clk, "vctcxo", NULL); + + clk = clk_register_fixed_rate(NULL, "pll1", NULL, CLK_IS_ROOT, + 624000000); + clk_register_clkdev(clk, "pll1", NULL); + + clk = clk_register_fixed_factor(NULL, "pll1_2", "pll1", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll1_2", NULL); + + clk = clk_register_fixed_factor(NULL, "pll1_4", "pll1_2", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll1_4", NULL); + + clk = clk_register_fixed_factor(NULL, "pll1_8", "pll1_4", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll1_8", NULL); + + clk = clk_register_fixed_factor(NULL, "pll1_16", "pll1_8", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll1_16", NULL); + + clk = clk_register_fixed_factor(NULL, "pll1_6", "pll1_2", + CLK_SET_RATE_PARENT, 1, 3); + clk_register_clkdev(clk, "pll1_6", NULL); + + clk = clk_register_fixed_factor(NULL, "pll1_12", "pll1_6", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll1_12", NULL); + + clk = clk_register_fixed_factor(NULL, "pll1_24", "pll1_12", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll1_24", NULL); + + clk = clk_register_fixed_factor(NULL, "pll1_48", "pll1_24", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll1_48", NULL); + + clk = clk_register_fixed_factor(NULL, "pll1_96", "pll1_48", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll1_96", NULL); + + clk = clk_register_fixed_factor(NULL, "pll1_13", "pll1", + CLK_SET_RATE_PARENT, 1, 13); + clk_register_clkdev(clk, "pll1_13", NULL); + + clk = clk_register_fixed_factor(NULL, "pll1_13_1_5", "pll1", + CLK_SET_RATE_PARENT, 2, 3); + clk_register_clkdev(clk, "pll1_13_1_5", NULL); + + clk = clk_register_fixed_factor(NULL, "pll1_2_1_5", "pll1", + CLK_SET_RATE_PARENT, 2, 3); + clk_register_clkdev(clk, "pll1_2_1_5", NULL); + + clk = clk_register_fixed_factor(NULL, "pll1_3_16", "pll1", + CLK_SET_RATE_PARENT, 3, 16); + clk_register_clkdev(clk, "pll1_3_16", NULL); + + uart_pll = mmp_clk_register_factor("uart_pll", "pll1_4", 0, + mpmu_base + MPMU_UART_PLL, + &uart_factor_masks, uart_factor_tbl, + ARRAY_SIZE(uart_factor_tbl)); + clk_set_rate(uart_pll, 14745600); + clk_register_clkdev(uart_pll, "uart_pll", NULL); + + clk = mmp_clk_register_apbc("twsi0", "pll1_13_1_5", + apbc_base + APBC_TWSI0, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa2xx-i2c.0"); + + clk = mmp_clk_register_apbc("twsi1", "pll1_13_1_5", + apbc_base + APBC_TWSI1, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa2xx-i2c.1"); + + clk = mmp_clk_register_apbc("gpio", "vctcxo", + apbc_base + APBC_GPIO, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa-gpio"); + + clk = mmp_clk_register_apbc("kpc", "clk32", + apbc_base + APBC_KPC, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa27x-keypad"); + + clk = mmp_clk_register_apbc("rtc", "clk32", + apbc_base + APBC_RTC, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "sa1100-rtc"); + + clk = mmp_clk_register_apbc("pwm0", "pll1_48", + apbc_base + APBC_PWM0, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa168-pwm.0"); + + clk = mmp_clk_register_apbc("pwm1", "pll1_48", + apbc_base + APBC_PWM1, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa168-pwm.1"); + + clk = mmp_clk_register_apbc("pwm2", "pll1_48", + apbc_base + APBC_PWM2, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa168-pwm.2"); + + clk = mmp_clk_register_apbc("pwm3", "pll1_48", + apbc_base + APBC_PWM3, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa168-pwm.3"); + + clk = clk_register_mux(NULL, "uart0_mux", uart_parent, + ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT, + apbc_base + APBC_UART0, 4, 3, 0, &clk_lock); + clk_set_parent(clk, uart_pll); + clk_register_clkdev(clk, "uart_mux.0", NULL); + + clk = mmp_clk_register_apbc("uart0", "uart0_mux", + apbc_base + APBC_UART0, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa2xx-uart.0"); + + clk = clk_register_mux(NULL, "uart1_mux", uart_parent, + ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT, + apbc_base + APBC_UART1, 4, 3, 0, &clk_lock); + clk_set_parent(clk, uart_pll); + clk_register_clkdev(clk, "uart_mux.1", NULL); + + clk = mmp_clk_register_apbc("uart1", "uart1_mux", + apbc_base + APBC_UART1, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa2xx-uart.1"); + + clk = clk_register_mux(NULL, "uart2_mux", uart_parent, + ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT, + apbc_base + APBC_UART2, 4, 3, 0, &clk_lock); + clk_set_parent(clk, uart_pll); + clk_register_clkdev(clk, "uart_mux.2", NULL); + + clk = mmp_clk_register_apbc("uart2", "uart2_mux", + apbc_base + APBC_UART2, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa2xx-uart.2"); + + clk = clk_register_mux(NULL, "ssp0_mux", ssp_parent, + ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT, + apbc_base + APBC_SSP0, 4, 3, 0, &clk_lock); + clk_register_clkdev(clk, "uart_mux.0", NULL); + + clk = mmp_clk_register_apbc("ssp0", "ssp0_mux", apbc_base + APBC_SSP0, + 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "mmp-ssp.0"); + + clk = clk_register_mux(NULL, "ssp1_mux", ssp_parent, + ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT, + apbc_base + APBC_SSP1, 4, 3, 0, &clk_lock); + clk_register_clkdev(clk, "ssp_mux.1", NULL); + + clk = mmp_clk_register_apbc("ssp1", "ssp1_mux", apbc_base + APBC_SSP1, + 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "mmp-ssp.1"); + + clk = clk_register_mux(NULL, "ssp2_mux", ssp_parent, + ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT, + apbc_base + APBC_SSP2, 4, 3, 0, &clk_lock); + clk_register_clkdev(clk, "ssp_mux.2", NULL); + + clk = mmp_clk_register_apbc("ssp2", "ssp1_mux", apbc_base + APBC_SSP2, + 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "mmp-ssp.2"); + + clk = clk_register_mux(NULL, "ssp3_mux", ssp_parent, + ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT, + apbc_base + APBC_SSP3, 4, 3, 0, &clk_lock); + clk_register_clkdev(clk, "ssp_mux.3", NULL); + + clk = mmp_clk_register_apbc("ssp3", "ssp1_mux", apbc_base + APBC_SSP3, + 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "mmp-ssp.3"); + + clk = clk_register_mux(NULL, "ssp4_mux", ssp_parent, + ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT, + apbc_base + APBC_SSP4, 4, 3, 0, &clk_lock); + clk_register_clkdev(clk, "ssp_mux.4", NULL); + + clk = mmp_clk_register_apbc("ssp4", "ssp1_mux", apbc_base + APBC_SSP4, + 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "mmp-ssp.4"); + + clk = mmp_clk_register_apmu("dfc", "pll1_4", apmu_base + APMU_DFC, + 0x19b, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa3xx-nand.0"); + + clk = clk_register_mux(NULL, "sdh0_mux", sdh_parent, + ARRAY_SIZE(sdh_parent), CLK_SET_RATE_PARENT, + apmu_base + APMU_SDH0, 6, 1, 0, &clk_lock); + clk_register_clkdev(clk, "sdh0_mux", NULL); + + clk = mmp_clk_register_apmu("sdh0", "sdh_mux", apmu_base + APMU_SDH0, + 0x1b, &clk_lock); + clk_register_clkdev(clk, NULL, "sdhci-pxa.0"); + + clk = clk_register_mux(NULL, "sdh1_mux", sdh_parent, + ARRAY_SIZE(sdh_parent), CLK_SET_RATE_PARENT, + apmu_base + APMU_SDH1, 6, 1, 0, &clk_lock); + clk_register_clkdev(clk, "sdh1_mux", NULL); + + clk = mmp_clk_register_apmu("sdh1", "sdh1_mux", apmu_base + APMU_SDH1, + 0x1b, &clk_lock); + clk_register_clkdev(clk, NULL, "sdhci-pxa.1"); + + clk = mmp_clk_register_apmu("usb", "usb_pll", apmu_base + APMU_USB, + 0x9, &clk_lock); + clk_register_clkdev(clk, "usb_clk", NULL); + + clk = mmp_clk_register_apmu("sph", "usb_pll", apmu_base + APMU_USB, + 0x12, &clk_lock); + clk_register_clkdev(clk, "sph_clk", NULL); + + clk = clk_register_mux(NULL, "disp0_mux", disp_parent, + ARRAY_SIZE(disp_parent), CLK_SET_RATE_PARENT, + apmu_base + APMU_DISP0, 6, 1, 0, &clk_lock); + clk_register_clkdev(clk, "disp_mux.0", NULL); + + clk = mmp_clk_register_apmu("disp0", "disp0_mux", + apmu_base + APMU_DISP0, 0x1b, &clk_lock); + clk_register_clkdev(clk, "fnclk", "mmp-disp.0"); + + clk = mmp_clk_register_apmu("disp0_hclk", "disp0_mux", + apmu_base + APMU_DISP0, 0x24, &clk_lock); + clk_register_clkdev(clk, "hclk", "mmp-disp.0"); + + clk = clk_register_mux(NULL, "ccic0_mux", ccic_parent, + ARRAY_SIZE(ccic_parent), CLK_SET_RATE_PARENT, + apmu_base + APMU_CCIC0, 6, 1, 0, &clk_lock); + clk_register_clkdev(clk, "ccic_mux.0", NULL); + + clk = mmp_clk_register_apmu("ccic0", "ccic0_mux", + apmu_base + APMU_CCIC0, 0x1b, &clk_lock); + clk_register_clkdev(clk, "fnclk", "mmp-ccic.0"); + + clk = clk_register_mux(NULL, "ccic0_phy_mux", ccic_phy_parent, + ARRAY_SIZE(ccic_phy_parent), + CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC0, + 7, 1, 0, &clk_lock); + clk_register_clkdev(clk, "ccic_phy_mux.0", NULL); + + clk = mmp_clk_register_apmu("ccic0_phy", "ccic0_phy_mux", + apmu_base + APMU_CCIC0, 0x24, &clk_lock); + clk_register_clkdev(clk, "phyclk", "mmp-ccic.0"); + + clk = clk_register_divider(NULL, "ccic0_sphy_div", "ccic0_mux", + CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC0, + 10, 5, 0, &clk_lock); + clk_register_clkdev(clk, "sphyclk_div", NULL); + + clk = mmp_clk_register_apmu("ccic0_sphy", "ccic0_sphy_div", + apmu_base + APMU_CCIC0, 0x300, &clk_lock); + clk_register_clkdev(clk, "sphyclk", "mmp-ccic.0"); +} diff --git a/drivers/clk/mmp/clk-pxa910.c b/drivers/clk/mmp/clk-pxa910.c new file mode 100644 index 00000000000..7048c31d6e7 --- /dev/null +++ b/drivers/clk/mmp/clk-pxa910.c @@ -0,0 +1,320 @@ +/* + * pxa910 clock framework source file + * + * Copyright (C) 2012 Marvell + * Chao Xie <xiechao.mail@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/spinlock.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/err.h> + +#include <mach/addr-map.h> + +#include "clk.h" + +#define APBC_RTC 0x28 +#define APBC_TWSI0 0x2c +#define APBC_KPC 0x18 +#define APBC_UART0 0x0 +#define APBC_UART1 0x4 +#define APBC_GPIO 0x8 +#define APBC_PWM0 0xc +#define APBC_PWM1 0x10 +#define APBC_PWM2 0x14 +#define APBC_PWM3 0x18 +#define APBC_SSP0 0x1c +#define APBC_SSP1 0x20 +#define APBC_SSP2 0x4c +#define APBCP_TWSI1 0x28 +#define APBCP_UART2 0x1c +#define APMU_SDH0 0x54 +#define APMU_SDH1 0x58 +#define APMU_USB 0x5c +#define APMU_DISP0 0x4c +#define APMU_CCIC0 0x50 +#define APMU_DFC 0x60 +#define MPMU_UART_PLL 0x14 + +static DEFINE_SPINLOCK(clk_lock); + +static struct clk_factor_masks uart_factor_masks = { + .factor = 2, + .num_mask = 0x1fff, + .den_mask = 0x1fff, + .num_shift = 16, + .den_shift = 0, +}; + +static struct clk_factor_tbl uart_factor_tbl[] = { + {.num = 8125, .den = 1536}, /*14.745MHZ */ +}; + +static const char *uart_parent[] = {"pll1_3_16", "uart_pll"}; +static const char *ssp_parent[] = {"pll1_96", "pll1_48", "pll1_24", "pll1_12"}; +static const char *sdh_parent[] = {"pll1_12", "pll1_13"}; +static const char *disp_parent[] = {"pll1_2", "pll1_12"}; +static const char *ccic_parent[] = {"pll1_2", "pll1_12"}; +static const char *ccic_phy_parent[] = {"pll1_6", "pll1_12"}; + +void __init pxa910_clk_init(void) +{ + struct clk *clk; + struct clk *uart_pll; + void __iomem *mpmu_base; + void __iomem *apmu_base; + void __iomem *apbcp_base; + void __iomem *apbc_base; + + mpmu_base = ioremap(APB_PHYS_BASE + 0x50000, SZ_4K); + if (mpmu_base == NULL) { + pr_err("error to ioremap MPMU base\n"); + return; + } + + apmu_base = ioremap(AXI_PHYS_BASE + 0x82800, SZ_4K); + if (apmu_base == NULL) { + pr_err("error to ioremap APMU base\n"); + return; + } + + apbcp_base = ioremap(APB_PHYS_BASE + 0x3b000, SZ_4K); + if (apbcp_base == NULL) { + pr_err("error to ioremap APBC extension base\n"); + return; + } + + apbc_base = ioremap(APB_PHYS_BASE + 0x15000, SZ_4K); + if (apbc_base == NULL) { + pr_err("error to ioremap APBC base\n"); + return; + } + + clk = clk_register_fixed_rate(NULL, "clk32", NULL, CLK_IS_ROOT, 3200); + clk_register_clkdev(clk, "clk32", NULL); + + clk = clk_register_fixed_rate(NULL, "vctcxo", NULL, CLK_IS_ROOT, + 26000000); + clk_register_clkdev(clk, "vctcxo", NULL); + + clk = clk_register_fixed_rate(NULL, "pll1", NULL, CLK_IS_ROOT, + 624000000); + clk_register_clkdev(clk, "pll1", NULL); + + clk = clk_register_fixed_factor(NULL, "pll1_2", "pll1", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll1_2", NULL); + + clk = clk_register_fixed_factor(NULL, "pll1_4", "pll1_2", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll1_4", NULL); + + clk = clk_register_fixed_factor(NULL, "pll1_8", "pll1_4", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll1_8", NULL); + + clk = clk_register_fixed_factor(NULL, "pll1_16", "pll1_8", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll1_16", NULL); + + clk = clk_register_fixed_factor(NULL, "pll1_6", "pll1_2", + CLK_SET_RATE_PARENT, 1, 3); + clk_register_clkdev(clk, "pll1_6", NULL); + + clk = clk_register_fixed_factor(NULL, "pll1_12", "pll1_6", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll1_12", NULL); + + clk = clk_register_fixed_factor(NULL, "pll1_24", "pll1_12", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll1_24", NULL); + + clk = clk_register_fixed_factor(NULL, "pll1_48", "pll1_24", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll1_48", NULL); + + clk = clk_register_fixed_factor(NULL, "pll1_96", "pll1_48", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll1_96", NULL); + + clk = clk_register_fixed_factor(NULL, "pll1_13", "pll1", + CLK_SET_RATE_PARENT, 1, 13); + clk_register_clkdev(clk, "pll1_13", NULL); + + clk = clk_register_fixed_factor(NULL, "pll1_13_1_5", "pll1", + CLK_SET_RATE_PARENT, 2, 3); + clk_register_clkdev(clk, "pll1_13_1_5", NULL); + + clk = clk_register_fixed_factor(NULL, "pll1_2_1_5", "pll1", + CLK_SET_RATE_PARENT, 2, 3); + clk_register_clkdev(clk, "pll1_2_1_5", NULL); + + clk = clk_register_fixed_factor(NULL, "pll1_3_16", "pll1", + CLK_SET_RATE_PARENT, 3, 16); + clk_register_clkdev(clk, "pll1_3_16", NULL); + + uart_pll = mmp_clk_register_factor("uart_pll", "pll1_4", 0, + mpmu_base + MPMU_UART_PLL, + &uart_factor_masks, uart_factor_tbl, + ARRAY_SIZE(uart_factor_tbl)); + clk_set_rate(uart_pll, 14745600); + clk_register_clkdev(uart_pll, "uart_pll", NULL); + + clk = mmp_clk_register_apbc("twsi0", "pll1_13_1_5", + apbc_base + APBC_TWSI0, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa2xx-i2c.0"); + + clk = mmp_clk_register_apbc("twsi1", "pll1_13_1_5", + apbcp_base + APBCP_TWSI1, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa2xx-i2c.1"); + + clk = mmp_clk_register_apbc("gpio", "vctcxo", + apbc_base + APBC_GPIO, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa-gpio"); + + clk = mmp_clk_register_apbc("kpc", "clk32", + apbc_base + APBC_KPC, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa27x-keypad"); + + clk = mmp_clk_register_apbc("rtc", "clk32", + apbc_base + APBC_RTC, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "sa1100-rtc"); + + clk = mmp_clk_register_apbc("pwm0", "pll1_48", + apbc_base + APBC_PWM0, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa910-pwm.0"); + + clk = mmp_clk_register_apbc("pwm1", "pll1_48", + apbc_base + APBC_PWM1, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa910-pwm.1"); + + clk = mmp_clk_register_apbc("pwm2", "pll1_48", + apbc_base + APBC_PWM2, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa910-pwm.2"); + + clk = mmp_clk_register_apbc("pwm3", "pll1_48", + apbc_base + APBC_PWM3, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa910-pwm.3"); + + clk = clk_register_mux(NULL, "uart0_mux", uart_parent, + ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT, + apbc_base + APBC_UART0, 4, 3, 0, &clk_lock); + clk_set_parent(clk, uart_pll); + clk_register_clkdev(clk, "uart_mux.0", NULL); + + clk = mmp_clk_register_apbc("uart0", "uart0_mux", + apbc_base + APBC_UART0, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa2xx-uart.0"); + + clk = clk_register_mux(NULL, "uart1_mux", uart_parent, + ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT, + apbc_base + APBC_UART1, 4, 3, 0, &clk_lock); + clk_set_parent(clk, uart_pll); + clk_register_clkdev(clk, "uart_mux.1", NULL); + + clk = mmp_clk_register_apbc("uart1", "uart1_mux", + apbc_base + APBC_UART1, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa2xx-uart.1"); + + clk = clk_register_mux(NULL, "uart2_mux", uart_parent, + ARRAY_SIZE(uart_parent), CLK_SET_RATE_PARENT, + apbcp_base + APBCP_UART2, 4, 3, 0, &clk_lock); + clk_set_parent(clk, uart_pll); + clk_register_clkdev(clk, "uart_mux.2", NULL); + + clk = mmp_clk_register_apbc("uart2", "uart2_mux", + apbcp_base + APBCP_UART2, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa2xx-uart.2"); + + clk = clk_register_mux(NULL, "ssp0_mux", ssp_parent, + ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT, + apbc_base + APBC_SSP0, 4, 3, 0, &clk_lock); + clk_register_clkdev(clk, "uart_mux.0", NULL); + + clk = mmp_clk_register_apbc("ssp0", "ssp0_mux", + apbc_base + APBC_SSP0, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "mmp-ssp.0"); + + clk = clk_register_mux(NULL, "ssp1_mux", ssp_parent, + ARRAY_SIZE(ssp_parent), CLK_SET_RATE_PARENT, + apbc_base + APBC_SSP1, 4, 3, 0, &clk_lock); + clk_register_clkdev(clk, "ssp_mux.1", NULL); + + clk = mmp_clk_register_apbc("ssp1", "ssp1_mux", + apbc_base + APBC_SSP1, 10, 0, &clk_lock); + clk_register_clkdev(clk, NULL, "mmp-ssp.1"); + + clk = mmp_clk_register_apmu("dfc", "pll1_4", + apmu_base + APMU_DFC, 0x19b, &clk_lock); + clk_register_clkdev(clk, NULL, "pxa3xx-nand.0"); + + clk = clk_register_mux(NULL, "sdh0_mux", sdh_parent, + ARRAY_SIZE(sdh_parent), CLK_SET_RATE_PARENT, + apmu_base + APMU_SDH0, 6, 1, 0, &clk_lock); + clk_register_clkdev(clk, "sdh0_mux", NULL); + + clk = mmp_clk_register_apmu("sdh0", "sdh_mux", + apmu_base + APMU_SDH0, 0x1b, &clk_lock); + clk_register_clkdev(clk, NULL, "sdhci-pxa.0"); + + clk = clk_register_mux(NULL, "sdh1_mux", sdh_parent, + ARRAY_SIZE(sdh_parent), CLK_SET_RATE_PARENT, + apmu_base + APMU_SDH1, 6, 1, 0, &clk_lock); + clk_register_clkdev(clk, "sdh1_mux", NULL); + + clk = mmp_clk_register_apmu("sdh1", "sdh1_mux", + apmu_base + APMU_SDH1, 0x1b, &clk_lock); + clk_register_clkdev(clk, NULL, "sdhci-pxa.1"); + + clk = mmp_clk_register_apmu("usb", "usb_pll", + apmu_base + APMU_USB, 0x9, &clk_lock); + clk_register_clkdev(clk, "usb_clk", NULL); + + clk = mmp_clk_register_apmu("sph", "usb_pll", + apmu_base + APMU_USB, 0x12, &clk_lock); + clk_register_clkdev(clk, "sph_clk", NULL); + + clk = clk_register_mux(NULL, "disp0_mux", disp_parent, + ARRAY_SIZE(disp_parent), CLK_SET_RATE_PARENT, + apmu_base + APMU_DISP0, 6, 1, 0, &clk_lock); + clk_register_clkdev(clk, "disp_mux.0", NULL); + + clk = mmp_clk_register_apmu("disp0", "disp0_mux", + apmu_base + APMU_DISP0, 0x1b, &clk_lock); + clk_register_clkdev(clk, NULL, "mmp-disp.0"); + + clk = clk_register_mux(NULL, "ccic0_mux", ccic_parent, + ARRAY_SIZE(ccic_parent), CLK_SET_RATE_PARENT, + apmu_base + APMU_CCIC0, 6, 1, 0, &clk_lock); + clk_register_clkdev(clk, "ccic_mux.0", NULL); + + clk = mmp_clk_register_apmu("ccic0", "ccic0_mux", + apmu_base + APMU_CCIC0, 0x1b, &clk_lock); + clk_register_clkdev(clk, "fnclk", "mmp-ccic.0"); + + clk = clk_register_mux(NULL, "ccic0_phy_mux", ccic_phy_parent, + ARRAY_SIZE(ccic_phy_parent), + CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC0, + 7, 1, 0, &clk_lock); + clk_register_clkdev(clk, "ccic_phy_mux.0", NULL); + + clk = mmp_clk_register_apmu("ccic0_phy", "ccic0_phy_mux", + apmu_base + APMU_CCIC0, 0x24, &clk_lock); + clk_register_clkdev(clk, "phyclk", "mmp-ccic.0"); + + clk = clk_register_divider(NULL, "ccic0_sphy_div", "ccic0_mux", + CLK_SET_RATE_PARENT, apmu_base + APMU_CCIC0, + 10, 5, 0, &clk_lock); + clk_register_clkdev(clk, "sphyclk_div", NULL); + + clk = mmp_clk_register_apmu("ccic0_sphy", "ccic0_sphy_div", + apmu_base + APMU_CCIC0, 0x300, &clk_lock); + clk_register_clkdev(clk, "sphyclk", "mmp-ccic.0"); +} diff --git a/drivers/clk/mmp/clk.h b/drivers/clk/mmp/clk.h new file mode 100644 index 00000000000..ab86dd4a416 --- /dev/null +++ b/drivers/clk/mmp/clk.h @@ -0,0 +1,35 @@ +#ifndef __MACH_MMP_CLK_H +#define __MACH_MMP_CLK_H + +#include <linux/clk-provider.h> +#include <linux/clkdev.h> + +#define APBC_NO_BUS_CTRL BIT(0) +#define APBC_POWER_CTRL BIT(1) + +struct clk_factor_masks { + unsigned int factor; + unsigned int num_mask; + unsigned int den_mask; + unsigned int num_shift; + unsigned int den_shift; +}; + +struct clk_factor_tbl { + unsigned int num; + unsigned int den; +}; + +extern struct clk *mmp_clk_register_pll2(const char *name, + const char *parent_name, unsigned long flags); +extern struct clk *mmp_clk_register_apbc(const char *name, + const char *parent_name, void __iomem *base, + unsigned int delay, unsigned int apbc_flags, spinlock_t *lock); +extern struct clk *mmp_clk_register_apmu(const char *name, + const char *parent_name, void __iomem *base, u32 enable_mask, + spinlock_t *lock); +extern struct clk *mmp_clk_register_factor(const char *name, + const char *parent_name, unsigned long flags, + void __iomem *base, struct clk_factor_masks *masks, + struct clk_factor_tbl *ftbl, unsigned int ftbl_cnt); +#endif diff --git a/drivers/clk/ux500/Makefile b/drivers/clk/ux500/Makefile new file mode 100644 index 00000000000..858fbfe6628 --- /dev/null +++ b/drivers/clk/ux500/Makefile @@ -0,0 +1,12 @@ +# +# Makefile for ux500 clocks +# + +# Clock types +obj-y += clk-prcc.o +obj-y += clk-prcmu.o + +# Clock definitions +obj-y += u8500_clk.o +obj-y += u9540_clk.o +obj-y += u8540_clk.o diff --git a/drivers/clk/ux500/clk-prcc.c b/drivers/clk/ux500/clk-prcc.c new file mode 100644 index 00000000000..7eee7f76835 --- /dev/null +++ b/drivers/clk/ux500/clk-prcc.c @@ -0,0 +1,164 @@ +/* + * PRCC clock implementation for ux500 platform. + * + * Copyright (C) 2012 ST-Ericsson SA + * Author: Ulf Hansson <ulf.hansson@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/clk-provider.h> +#include <linux/clk-private.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/types.h> +#include <mach/hardware.h> + +#include "clk.h" + +#define PRCC_PCKEN 0x000 +#define PRCC_PCKDIS 0x004 +#define PRCC_KCKEN 0x008 +#define PRCC_KCKDIS 0x00C +#define PRCC_PCKSR 0x010 +#define PRCC_KCKSR 0x014 + +#define to_clk_prcc(_hw) container_of(_hw, struct clk_prcc, hw) + +struct clk_prcc { + struct clk_hw hw; + void __iomem *base; + u32 cg_sel; + int is_enabled; +}; + +/* PRCC clock operations. */ + +static int clk_prcc_pclk_enable(struct clk_hw *hw) +{ + struct clk_prcc *clk = to_clk_prcc(hw); + + writel(clk->cg_sel, (clk->base + PRCC_PCKEN)); + while (!(readl(clk->base + PRCC_PCKSR) & clk->cg_sel)) + cpu_relax(); + + clk->is_enabled = 1; + return 0; +} + +static void clk_prcc_pclk_disable(struct clk_hw *hw) +{ + struct clk_prcc *clk = to_clk_prcc(hw); + + writel(clk->cg_sel, (clk->base + PRCC_PCKDIS)); + clk->is_enabled = 0; +} + +static int clk_prcc_kclk_enable(struct clk_hw *hw) +{ + struct clk_prcc *clk = to_clk_prcc(hw); + + writel(clk->cg_sel, (clk->base + PRCC_KCKEN)); + while (!(readl(clk->base + PRCC_KCKSR) & clk->cg_sel)) + cpu_relax(); + + clk->is_enabled = 1; + return 0; +} + +static void clk_prcc_kclk_disable(struct clk_hw *hw) +{ + struct clk_prcc *clk = to_clk_prcc(hw); + + writel(clk->cg_sel, (clk->base + PRCC_KCKDIS)); + clk->is_enabled = 0; +} + +static int clk_prcc_is_enabled(struct clk_hw *hw) +{ + struct clk_prcc *clk = to_clk_prcc(hw); + return clk->is_enabled; +} + +static struct clk_ops clk_prcc_pclk_ops = { + .enable = clk_prcc_pclk_enable, + .disable = clk_prcc_pclk_disable, + .is_enabled = clk_prcc_is_enabled, +}; + +static struct clk_ops clk_prcc_kclk_ops = { + .enable = clk_prcc_kclk_enable, + .disable = clk_prcc_kclk_disable, + .is_enabled = clk_prcc_is_enabled, +}; + +static struct clk *clk_reg_prcc(const char *name, + const char *parent_name, + resource_size_t phy_base, + u32 cg_sel, + unsigned long flags, + struct clk_ops *clk_prcc_ops) +{ + struct clk_prcc *clk; + struct clk_init_data clk_prcc_init; + struct clk *clk_reg; + + if (!name) { + pr_err("clk_prcc: %s invalid arguments passed\n", __func__); + return ERR_PTR(-EINVAL); + } + + clk = kzalloc(sizeof(struct clk_prcc), GFP_KERNEL); + if (!clk) { + pr_err("clk_prcc: %s could not allocate clk\n", __func__); + return ERR_PTR(-ENOMEM); + } + + clk->base = ioremap(phy_base, SZ_4K); + if (!clk->base) + goto free_clk; + + clk->cg_sel = cg_sel; + clk->is_enabled = 1; + + clk_prcc_init.name = name; + clk_prcc_init.ops = clk_prcc_ops; + clk_prcc_init.flags = flags; + clk_prcc_init.parent_names = (parent_name ? &parent_name : NULL); + clk_prcc_init.num_parents = (parent_name ? 1 : 0); + clk->hw.init = &clk_prcc_init; + + clk_reg = clk_register(NULL, &clk->hw); + if (IS_ERR_OR_NULL(clk_reg)) + goto unmap_clk; + + return clk_reg; + +unmap_clk: + iounmap(clk->base); +free_clk: + kfree(clk); + pr_err("clk_prcc: %s failed to register clk\n", __func__); + return ERR_PTR(-ENOMEM); +} + +struct clk *clk_reg_prcc_pclk(const char *name, + const char *parent_name, + resource_size_t phy_base, + u32 cg_sel, + unsigned long flags) +{ + return clk_reg_prcc(name, parent_name, phy_base, cg_sel, flags, + &clk_prcc_pclk_ops); +} + +struct clk *clk_reg_prcc_kclk(const char *name, + const char *parent_name, + resource_size_t phy_base, + u32 cg_sel, + unsigned long flags) +{ + return clk_reg_prcc(name, parent_name, phy_base, cg_sel, flags, + &clk_prcc_kclk_ops); +} diff --git a/drivers/clk/ux500/clk-prcmu.c b/drivers/clk/ux500/clk-prcmu.c new file mode 100644 index 00000000000..930cdfeb47a --- /dev/null +++ b/drivers/clk/ux500/clk-prcmu.c @@ -0,0 +1,252 @@ +/* + * PRCMU clock implementation for ux500 platform. + * + * Copyright (C) 2012 ST-Ericsson SA + * Author: Ulf Hansson <ulf.hansson@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/clk-provider.h> +#include <linux/clk-private.h> +#include <linux/mfd/dbx500-prcmu.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/err.h> +#include "clk.h" + +#define to_clk_prcmu(_hw) container_of(_hw, struct clk_prcmu, hw) + +struct clk_prcmu { + struct clk_hw hw; + u8 cg_sel; + int is_enabled; +}; + +/* PRCMU clock operations. */ + +static int clk_prcmu_prepare(struct clk_hw *hw) +{ + struct clk_prcmu *clk = to_clk_prcmu(hw); + return prcmu_request_clock(clk->cg_sel, true); +} + +static void clk_prcmu_unprepare(struct clk_hw *hw) +{ + struct clk_prcmu *clk = to_clk_prcmu(hw); + if (prcmu_request_clock(clk->cg_sel, false)) + pr_err("clk_prcmu: %s failed to disable %s.\n", __func__, + hw->init->name); +} + +static int clk_prcmu_enable(struct clk_hw *hw) +{ + struct clk_prcmu *clk = to_clk_prcmu(hw); + clk->is_enabled = 1; + return 0; +} + +static void clk_prcmu_disable(struct clk_hw *hw) +{ + struct clk_prcmu *clk = to_clk_prcmu(hw); + clk->is_enabled = 0; +} + +static int clk_prcmu_is_enabled(struct clk_hw *hw) +{ + struct clk_prcmu *clk = to_clk_prcmu(hw); + return clk->is_enabled; +} + +static unsigned long clk_prcmu_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_prcmu *clk = to_clk_prcmu(hw); + return prcmu_clock_rate(clk->cg_sel); +} + +static long clk_prcmu_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + struct clk_prcmu *clk = to_clk_prcmu(hw); + return prcmu_round_clock_rate(clk->cg_sel, rate); +} + +static int clk_prcmu_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_prcmu *clk = to_clk_prcmu(hw); + return prcmu_set_clock_rate(clk->cg_sel, rate); +} + +static int request_ape_opp100(bool enable) +{ + static int reqs; + int err = 0; + + if (enable) { + if (!reqs) + err = prcmu_qos_add_requirement(PRCMU_QOS_APE_OPP, + "clock", 100); + if (!err) + reqs++; + } else { + reqs--; + if (!reqs) + prcmu_qos_remove_requirement(PRCMU_QOS_APE_OPP, + "clock"); + } + return err; +} + +static int clk_prcmu_opp_prepare(struct clk_hw *hw) +{ + int err; + struct clk_prcmu *clk = to_clk_prcmu(hw); + + err = request_ape_opp100(true); + if (err) { + pr_err("clk_prcmu: %s failed to request APE OPP100 for %s.\n", + __func__, hw->init->name); + return err; + } + + err = prcmu_request_clock(clk->cg_sel, true); + if (err) + request_ape_opp100(false); + + return err; +} + +static void clk_prcmu_opp_unprepare(struct clk_hw *hw) +{ + struct clk_prcmu *clk = to_clk_prcmu(hw); + + if (prcmu_request_clock(clk->cg_sel, false)) + goto out_error; + if (request_ape_opp100(false)) + goto out_error; + return; + +out_error: + pr_err("clk_prcmu: %s failed to disable %s.\n", __func__, + hw->init->name); +} + +static struct clk_ops clk_prcmu_scalable_ops = { + .prepare = clk_prcmu_prepare, + .unprepare = clk_prcmu_unprepare, + .enable = clk_prcmu_enable, + .disable = clk_prcmu_disable, + .is_enabled = clk_prcmu_is_enabled, + .recalc_rate = clk_prcmu_recalc_rate, + .round_rate = clk_prcmu_round_rate, + .set_rate = clk_prcmu_set_rate, +}; + +static struct clk_ops clk_prcmu_gate_ops = { + .prepare = clk_prcmu_prepare, + .unprepare = clk_prcmu_unprepare, + .enable = clk_prcmu_enable, + .disable = clk_prcmu_disable, + .is_enabled = clk_prcmu_is_enabled, + .recalc_rate = clk_prcmu_recalc_rate, +}; + +static struct clk_ops clk_prcmu_rate_ops = { + .is_enabled = clk_prcmu_is_enabled, + .recalc_rate = clk_prcmu_recalc_rate, +}; + +static struct clk_ops clk_prcmu_opp_gate_ops = { + .prepare = clk_prcmu_opp_prepare, + .unprepare = clk_prcmu_opp_unprepare, + .enable = clk_prcmu_enable, + .disable = clk_prcmu_disable, + .is_enabled = clk_prcmu_is_enabled, + .recalc_rate = clk_prcmu_recalc_rate, +}; + +static struct clk *clk_reg_prcmu(const char *name, + const char *parent_name, + u8 cg_sel, + unsigned long rate, + unsigned long flags, + struct clk_ops *clk_prcmu_ops) +{ + struct clk_prcmu *clk; + struct clk_init_data clk_prcmu_init; + struct clk *clk_reg; + + if (!name) { + pr_err("clk_prcmu: %s invalid arguments passed\n", __func__); + return ERR_PTR(-EINVAL); + } + + clk = kzalloc(sizeof(struct clk_prcmu), GFP_KERNEL); + if (!clk) { + pr_err("clk_prcmu: %s could not allocate clk\n", __func__); + return ERR_PTR(-ENOMEM); + } + + clk->cg_sel = cg_sel; + clk->is_enabled = 1; + /* "rate" can be used for changing the initial frequency */ + if (rate) + prcmu_set_clock_rate(cg_sel, rate); + + clk_prcmu_init.name = name; + clk_prcmu_init.ops = clk_prcmu_ops; + clk_prcmu_init.flags = flags; + clk_prcmu_init.parent_names = (parent_name ? &parent_name : NULL); + clk_prcmu_init.num_parents = (parent_name ? 1 : 0); + clk->hw.init = &clk_prcmu_init; + + clk_reg = clk_register(NULL, &clk->hw); + if (IS_ERR_OR_NULL(clk_reg)) + goto free_clk; + + return clk_reg; + +free_clk: + kfree(clk); + pr_err("clk_prcmu: %s failed to register clk\n", __func__); + return ERR_PTR(-ENOMEM); +} + +struct clk *clk_reg_prcmu_scalable(const char *name, + const char *parent_name, + u8 cg_sel, + unsigned long rate, + unsigned long flags) +{ + return clk_reg_prcmu(name, parent_name, cg_sel, rate, flags, + &clk_prcmu_scalable_ops); +} + +struct clk *clk_reg_prcmu_gate(const char *name, + const char *parent_name, + u8 cg_sel, + unsigned long flags) +{ + return clk_reg_prcmu(name, parent_name, cg_sel, 0, flags, + &clk_prcmu_gate_ops); +} + +struct clk *clk_reg_prcmu_rate(const char *name, + const char *parent_name, + u8 cg_sel, + unsigned long flags) +{ + return clk_reg_prcmu(name, parent_name, cg_sel, 0, flags, + &clk_prcmu_rate_ops); +} + +struct clk *clk_reg_prcmu_opp_gate(const char *name, + const char *parent_name, + u8 cg_sel, + unsigned long flags) +{ + return clk_reg_prcmu(name, parent_name, cg_sel, 0, flags, + &clk_prcmu_opp_gate_ops); +} diff --git a/drivers/clk/ux500/clk.h b/drivers/clk/ux500/clk.h new file mode 100644 index 00000000000..836d7d16751 --- /dev/null +++ b/drivers/clk/ux500/clk.h @@ -0,0 +1,48 @@ +/* + * Clocks for ux500 platforms + * + * Copyright (C) 2012 ST-Ericsson SA + * Author: Ulf Hansson <ulf.hansson@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef __UX500_CLK_H +#define __UX500_CLK_H + +#include <linux/clk.h> + +struct clk *clk_reg_prcc_pclk(const char *name, + const char *parent_name, + unsigned int phy_base, + u32 cg_sel, + unsigned long flags); + +struct clk *clk_reg_prcc_kclk(const char *name, + const char *parent_name, + unsigned int phy_base, + u32 cg_sel, + unsigned long flags); + +struct clk *clk_reg_prcmu_scalable(const char *name, + const char *parent_name, + u8 cg_sel, + unsigned long rate, + unsigned long flags); + +struct clk *clk_reg_prcmu_gate(const char *name, + const char *parent_name, + u8 cg_sel, + unsigned long flags); + +struct clk *clk_reg_prcmu_rate(const char *name, + const char *parent_name, + u8 cg_sel, + unsigned long flags); + +struct clk *clk_reg_prcmu_opp_gate(const char *name, + const char *parent_name, + u8 cg_sel, + unsigned long flags); + +#endif /* __UX500_CLK_H */ diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c new file mode 100644 index 00000000000..ca4a25ed844 --- /dev/null +++ b/drivers/clk/ux500/u8500_clk.c @@ -0,0 +1,477 @@ +/* + * Clock definitions for u8500 platform. + * + * Copyright (C) 2012 ST-Ericsson SA + * Author: Ulf Hansson <ulf.hansson@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/mfd/dbx500-prcmu.h> +#include <linux/platform_data/clk-ux500.h> + +#include "clk.h" + +void u8500_clk_init(void) +{ + struct prcmu_fw_version *fw_version; + const char *sgaclk_parent = NULL; + struct clk *clk; + + /* Clock sources */ + clk = clk_reg_prcmu_gate("soc0_pll", NULL, PRCMU_PLLSOC0, + CLK_IS_ROOT|CLK_IGNORE_UNUSED); + clk_register_clkdev(clk, "soc0_pll", NULL); + + clk = clk_reg_prcmu_gate("soc1_pll", NULL, PRCMU_PLLSOC1, + CLK_IS_ROOT|CLK_IGNORE_UNUSED); + clk_register_clkdev(clk, "soc1_pll", NULL); + + clk = clk_reg_prcmu_gate("ddr_pll", NULL, PRCMU_PLLDDR, + CLK_IS_ROOT|CLK_IGNORE_UNUSED); + clk_register_clkdev(clk, "ddr_pll", NULL); + + /* FIXME: Add sys, ulp and int clocks here. */ + + clk = clk_register_fixed_rate(NULL, "rtc32k", "NULL", + CLK_IS_ROOT|CLK_IGNORE_UNUSED, + 32768); + clk_register_clkdev(clk, "clk32k", NULL); + clk_register_clkdev(clk, NULL, "rtc-pl031"); + + /* PRCMU clocks */ + fw_version = prcmu_get_fw_version(); + if (fw_version != NULL) { + switch (fw_version->project) { + case PRCMU_FW_PROJECT_U8500_C2: + case PRCMU_FW_PROJECT_U8520: + case PRCMU_FW_PROJECT_U8420: + sgaclk_parent = "soc0_pll"; + break; + default: + break; + } + } + + if (sgaclk_parent) + clk = clk_reg_prcmu_gate("sgclk", sgaclk_parent, + PRCMU_SGACLK, 0); + else + clk = clk_reg_prcmu_gate("sgclk", NULL, + PRCMU_SGACLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "mali"); + + clk = clk_reg_prcmu_gate("uartclk", NULL, PRCMU_UARTCLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "UART"); + + clk = clk_reg_prcmu_gate("msp02clk", NULL, PRCMU_MSP02CLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "MSP02"); + + clk = clk_reg_prcmu_gate("msp1clk", NULL, PRCMU_MSP1CLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "MSP1"); + + clk = clk_reg_prcmu_gate("i2cclk", NULL, PRCMU_I2CCLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "I2C"); + + clk = clk_reg_prcmu_gate("slimclk", NULL, PRCMU_SLIMCLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "slim"); + + clk = clk_reg_prcmu_gate("per1clk", NULL, PRCMU_PER1CLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "PERIPH1"); + + clk = clk_reg_prcmu_gate("per2clk", NULL, PRCMU_PER2CLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "PERIPH2"); + + clk = clk_reg_prcmu_gate("per3clk", NULL, PRCMU_PER3CLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "PERIPH3"); + + clk = clk_reg_prcmu_gate("per5clk", NULL, PRCMU_PER5CLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "PERIPH5"); + + clk = clk_reg_prcmu_gate("per6clk", NULL, PRCMU_PER6CLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "PERIPH6"); + + clk = clk_reg_prcmu_gate("per7clk", NULL, PRCMU_PER7CLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "PERIPH7"); + + clk = clk_reg_prcmu_scalable("lcdclk", NULL, PRCMU_LCDCLK, 0, + CLK_IS_ROOT|CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "lcd"); + clk_register_clkdev(clk, "lcd", "mcde"); + + clk = clk_reg_prcmu_opp_gate("bmlclk", NULL, PRCMU_BMLCLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "bml"); + + clk = clk_reg_prcmu_scalable("hsitxclk", NULL, PRCMU_HSITXCLK, 0, + CLK_IS_ROOT|CLK_SET_RATE_GATE); + + clk = clk_reg_prcmu_scalable("hsirxclk", NULL, PRCMU_HSIRXCLK, 0, + CLK_IS_ROOT|CLK_SET_RATE_GATE); + + clk = clk_reg_prcmu_scalable("hdmiclk", NULL, PRCMU_HDMICLK, 0, + CLK_IS_ROOT|CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "hdmi"); + clk_register_clkdev(clk, "hdmi", "mcde"); + + clk = clk_reg_prcmu_gate("apeatclk", NULL, PRCMU_APEATCLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "apeat"); + + clk = clk_reg_prcmu_gate("apetraceclk", NULL, PRCMU_APETRACECLK, + CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "apetrace"); + + clk = clk_reg_prcmu_gate("mcdeclk", NULL, PRCMU_MCDECLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "mcde"); + clk_register_clkdev(clk, "mcde", "mcde"); + clk_register_clkdev(clk, "dsisys", "dsilink.0"); + clk_register_clkdev(clk, "dsisys", "dsilink.1"); + clk_register_clkdev(clk, "dsisys", "dsilink.2"); + + clk = clk_reg_prcmu_opp_gate("ipi2cclk", NULL, PRCMU_IPI2CCLK, + CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "ipi2"); + + clk = clk_reg_prcmu_gate("dsialtclk", NULL, PRCMU_DSIALTCLK, + CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "dsialt"); + + clk = clk_reg_prcmu_gate("dmaclk", NULL, PRCMU_DMACLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "dma40.0"); + + clk = clk_reg_prcmu_gate("b2r2clk", NULL, PRCMU_B2R2CLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "b2r2"); + clk_register_clkdev(clk, NULL, "b2r2_core"); + clk_register_clkdev(clk, NULL, "U8500-B2R2.0"); + + clk = clk_reg_prcmu_scalable("tvclk", NULL, PRCMU_TVCLK, 0, + CLK_IS_ROOT|CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "tv"); + clk_register_clkdev(clk, "tv", "mcde"); + + clk = clk_reg_prcmu_gate("sspclk", NULL, PRCMU_SSPCLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "SSP"); + + clk = clk_reg_prcmu_gate("rngclk", NULL, PRCMU_RNGCLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "rngclk"); + + clk = clk_reg_prcmu_gate("uiccclk", NULL, PRCMU_UICCCLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "uicc"); + + /* + * FIXME: The MTU clocks might need some kind of "parent muxed join" + * and these have no K-clocks. For now, we ignore the missing + * connection to the corresponding P-clocks, p6_mtu0_clk and + * p6_mtu1_clk. Instead timclk is used which is the valid parent. + */ + clk = clk_reg_prcmu_gate("timclk", NULL, PRCMU_TIMCLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "mtu0"); + clk_register_clkdev(clk, NULL, "mtu1"); + + clk = clk_reg_prcmu_gate("sdmmcclk", NULL, PRCMU_SDMMCCLK, CLK_IS_ROOT); + clk_register_clkdev(clk, NULL, "sdmmc"); + + + clk = clk_reg_prcmu_scalable("dsi_pll", "hdmiclk", + PRCMU_PLLDSI, 0, CLK_SET_RATE_GATE); + clk_register_clkdev(clk, "dsihs2", "mcde"); + clk_register_clkdev(clk, "dsihs2", "dsilink.2"); + + + clk = clk_reg_prcmu_scalable("dsi0clk", "dsi_pll", + PRCMU_DSI0CLK, 0, CLK_SET_RATE_GATE); + clk_register_clkdev(clk, "dsihs0", "mcde"); + clk_register_clkdev(clk, "dsihs0", "dsilink.0"); + + clk = clk_reg_prcmu_scalable("dsi1clk", "dsi_pll", + PRCMU_DSI1CLK, 0, CLK_SET_RATE_GATE); + clk_register_clkdev(clk, "dsihs1", "mcde"); + clk_register_clkdev(clk, "dsihs1", "dsilink.1"); + + clk = clk_reg_prcmu_scalable("dsi0escclk", "tvclk", + PRCMU_DSI0ESCCLK, 0, CLK_SET_RATE_GATE); + clk_register_clkdev(clk, "dsilp0", "dsilink.0"); + clk_register_clkdev(clk, "dsilp0", "mcde"); + + clk = clk_reg_prcmu_scalable("dsi1escclk", "tvclk", + PRCMU_DSI1ESCCLK, 0, CLK_SET_RATE_GATE); + clk_register_clkdev(clk, "dsilp1", "dsilink.1"); + clk_register_clkdev(clk, "dsilp1", "mcde"); + + clk = clk_reg_prcmu_scalable("dsi2escclk", "tvclk", + PRCMU_DSI2ESCCLK, 0, CLK_SET_RATE_GATE); + clk_register_clkdev(clk, "dsilp2", "dsilink.2"); + clk_register_clkdev(clk, "dsilp2", "mcde"); + + clk = clk_reg_prcmu_rate("smp_twd", NULL, PRCMU_ARMSS, + CLK_IS_ROOT|CLK_GET_RATE_NOCACHE| + CLK_IGNORE_UNUSED); + clk_register_clkdev(clk, NULL, "smp_twd"); + + /* + * FIXME: Add special handled PRCMU clocks here: + * 1. clk_arm, use PRCMU_ARMCLK. + * 2. clkout0yuv, use PRCMU as parent + need regulator + pinctrl. + * 3. ab9540_clkout1yuv, see clkout0yuv + */ + + /* PRCC P-clocks */ + clk = clk_reg_prcc_pclk("p1_pclk0", "per1clk", U8500_CLKRST1_BASE, + BIT(0), 0); + clk_register_clkdev(clk, "apb_pclk", "uart0"); + + clk = clk_reg_prcc_pclk("p1_pclk1", "per1clk", U8500_CLKRST1_BASE, + BIT(1), 0); + clk_register_clkdev(clk, "apb_pclk", "uart1"); + + clk = clk_reg_prcc_pclk("p1_pclk2", "per1clk", U8500_CLKRST1_BASE, + BIT(2), 0); + clk = clk_reg_prcc_pclk("p1_pclk3", "per1clk", U8500_CLKRST1_BASE, + BIT(3), 0); + clk = clk_reg_prcc_pclk("p1_pclk4", "per1clk", U8500_CLKRST1_BASE, + BIT(4), 0); + + clk = clk_reg_prcc_pclk("p1_pclk5", "per1clk", U8500_CLKRST1_BASE, + BIT(5), 0); + clk_register_clkdev(clk, "apb_pclk", "sdi0"); + + clk = clk_reg_prcc_pclk("p1_pclk6", "per1clk", U8500_CLKRST1_BASE, + BIT(6), 0); + + clk = clk_reg_prcc_pclk("p1_pclk7", "per1clk", U8500_CLKRST1_BASE, + BIT(7), 0); + clk_register_clkdev(clk, NULL, "spi3"); + + clk = clk_reg_prcc_pclk("p1_pclk8", "per1clk", U8500_CLKRST1_BASE, + BIT(8), 0); + + clk = clk_reg_prcc_pclk("p1_pclk9", "per1clk", U8500_CLKRST1_BASE, + BIT(9), 0); + clk_register_clkdev(clk, NULL, "gpio.0"); + clk_register_clkdev(clk, NULL, "gpio.1"); + clk_register_clkdev(clk, NULL, "gpioblock0"); + + clk = clk_reg_prcc_pclk("p1_pclk10", "per1clk", U8500_CLKRST1_BASE, + BIT(10), 0); + clk = clk_reg_prcc_pclk("p1_pclk11", "per1clk", U8500_CLKRST1_BASE, + BIT(11), 0); + + clk = clk_reg_prcc_pclk("p2_pclk0", "per2clk", U8500_CLKRST2_BASE, + BIT(0), 0); + + clk = clk_reg_prcc_pclk("p2_pclk1", "per2clk", U8500_CLKRST2_BASE, + BIT(1), 0); + clk_register_clkdev(clk, NULL, "spi2"); + + clk = clk_reg_prcc_pclk("p2_pclk2", "per2clk", U8500_CLKRST2_BASE, + BIT(2), 0); + clk_register_clkdev(clk, NULL, "spi1"); + + clk = clk_reg_prcc_pclk("p2_pclk3", "per2clk", U8500_CLKRST2_BASE, + BIT(3), 0); + clk_register_clkdev(clk, NULL, "pwl"); + + clk = clk_reg_prcc_pclk("p2_pclk4", "per2clk", U8500_CLKRST2_BASE, + BIT(4), 0); + clk_register_clkdev(clk, "apb_pclk", "sdi4"); + + clk = clk_reg_prcc_pclk("p2_pclk5", "per2clk", U8500_CLKRST2_BASE, + BIT(5), 0); + + clk = clk_reg_prcc_pclk("p2_pclk6", "per2clk", U8500_CLKRST2_BASE, + BIT(6), 0); + clk_register_clkdev(clk, "apb_pclk", "sdi1"); + + + clk = clk_reg_prcc_pclk("p2_pclk7", "per2clk", U8500_CLKRST2_BASE, + BIT(7), 0); + clk_register_clkdev(clk, "apb_pclk", "sdi3"); + + clk = clk_reg_prcc_pclk("p2_pclk8", "per2clk", U8500_CLKRST2_BASE, + BIT(8), 0); + clk_register_clkdev(clk, NULL, "spi0"); + + clk = clk_reg_prcc_pclk("p2_pclk9", "per2clk", U8500_CLKRST2_BASE, + BIT(9), 0); + clk_register_clkdev(clk, "hsir_hclk", "ste_hsi.0"); + + clk = clk_reg_prcc_pclk("p2_pclk10", "per2clk", U8500_CLKRST2_BASE, + BIT(10), 0); + clk_register_clkdev(clk, "hsit_hclk", "ste_hsi.0"); + + clk = clk_reg_prcc_pclk("p2_pclk11", "per2clk", U8500_CLKRST2_BASE, + BIT(11), 0); + clk_register_clkdev(clk, NULL, "gpio.6"); + clk_register_clkdev(clk, NULL, "gpio.7"); + clk_register_clkdev(clk, NULL, "gpioblock1"); + + clk = clk_reg_prcc_pclk("p2_pclk12", "per2clk", U8500_CLKRST2_BASE, + BIT(11), 0); + + clk = clk_reg_prcc_pclk("p3_pclk0", "per3clk", U8500_CLKRST3_BASE, + BIT(0), 0); + clk_register_clkdev(clk, NULL, "fsmc"); + + clk = clk_reg_prcc_pclk("p3_pclk1", "per3clk", U8500_CLKRST3_BASE, + BIT(1), 0); + clk = clk_reg_prcc_pclk("p3_pclk2", "per3clk", U8500_CLKRST3_BASE, + BIT(2), 0); + clk = clk_reg_prcc_pclk("p3_pclk3", "per3clk", U8500_CLKRST3_BASE, + BIT(3), 0); + + clk = clk_reg_prcc_pclk("p3_pclk4", "per3clk", U8500_CLKRST3_BASE, + BIT(4), 0); + clk_register_clkdev(clk, "apb_pclk", "sdi2"); + + clk = clk_reg_prcc_pclk("p3_pclk5", "per3clk", U8500_CLKRST3_BASE, + BIT(5), 0); + + clk = clk_reg_prcc_pclk("p3_pclk6", "per3clk", U8500_CLKRST3_BASE, + BIT(6), 0); + clk_register_clkdev(clk, "apb_pclk", "uart2"); + + clk = clk_reg_prcc_pclk("p3_pclk7", "per3clk", U8500_CLKRST3_BASE, + BIT(7), 0); + clk_register_clkdev(clk, "apb_pclk", "sdi5"); + + clk = clk_reg_prcc_pclk("p3_pclk8", "per3clk", U8500_CLKRST3_BASE, + BIT(8), 0); + clk_register_clkdev(clk, NULL, "gpio.2"); + clk_register_clkdev(clk, NULL, "gpio.3"); + clk_register_clkdev(clk, NULL, "gpio.4"); + clk_register_clkdev(clk, NULL, "gpio.5"); + clk_register_clkdev(clk, NULL, "gpioblock2"); + + clk = clk_reg_prcc_pclk("p5_pclk0", "per5clk", U8500_CLKRST5_BASE, + BIT(0), 0); + clk_register_clkdev(clk, "usb", "musb-ux500.0"); + + clk = clk_reg_prcc_pclk("p5_pclk1", "per5clk", U8500_CLKRST5_BASE, + BIT(1), 0); + clk_register_clkdev(clk, NULL, "gpio.8"); + clk_register_clkdev(clk, NULL, "gpioblock3"); + + clk = clk_reg_prcc_pclk("p6_pclk0", "per6clk", U8500_CLKRST6_BASE, + BIT(0), 0); + + clk = clk_reg_prcc_pclk("p6_pclk1", "per6clk", U8500_CLKRST6_BASE, + BIT(1), 0); + clk_register_clkdev(clk, NULL, "cryp0"); + clk_register_clkdev(clk, NULL, "cryp1"); + + clk = clk_reg_prcc_pclk("p6_pclk2", "per6clk", U8500_CLKRST6_BASE, + BIT(2), 0); + clk_register_clkdev(clk, NULL, "hash0"); + + clk = clk_reg_prcc_pclk("p6_pclk3", "per6clk", U8500_CLKRST6_BASE, + BIT(3), 0); + clk_register_clkdev(clk, NULL, "pka"); + + clk = clk_reg_prcc_pclk("p6_pclk4", "per6clk", U8500_CLKRST6_BASE, + BIT(4), 0); + clk_register_clkdev(clk, NULL, "hash1"); + + clk = clk_reg_prcc_pclk("p6_pclk5", "per6clk", U8500_CLKRST6_BASE, + BIT(5), 0); + clk_register_clkdev(clk, NULL, "cfgreg"); + + clk = clk_reg_prcc_pclk("p6_pclk6", "per6clk", U8500_CLKRST6_BASE, + BIT(6), 0); + clk = clk_reg_prcc_pclk("p6_pclk7", "per6clk", U8500_CLKRST6_BASE, + BIT(7), 0); + + /* PRCC K-clocks + * + * FIXME: Some drivers requires PERPIH[n| to be automatically enabled + * by enabling just the K-clock, even if it is not a valid parent to + * the K-clock. Until drivers get fixed we might need some kind of + * "parent muxed join". + */ + + /* Periph1 */ + clk = clk_reg_prcc_kclk("p1_uart0_kclk", "uartclk", + U8500_CLKRST1_BASE, BIT(0), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "uart0"); + + clk = clk_reg_prcc_kclk("p1_uart1_kclk", "uartclk", + U8500_CLKRST1_BASE, BIT(1), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "uart1"); + + clk = clk_reg_prcc_kclk("p1_i2c1_kclk", "i2cclk", + U8500_CLKRST1_BASE, BIT(2), CLK_SET_RATE_GATE); + clk = clk_reg_prcc_kclk("p1_msp0_kclk", "msp02clk", + U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE); + clk = clk_reg_prcc_kclk("p1_msp1_kclk", "msp1clk", + U8500_CLKRST1_BASE, BIT(4), CLK_SET_RATE_GATE); + + clk = clk_reg_prcc_kclk("p1_sdi0_kclk", "sdmmcclk", + U8500_CLKRST1_BASE, BIT(5), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "sdi0"); + + clk = clk_reg_prcc_kclk("p1_i2c2_kclk", "i2cclk", + U8500_CLKRST1_BASE, BIT(6), CLK_SET_RATE_GATE); + clk = clk_reg_prcc_kclk("p1_slimbus0_kclk", "slimclk", + U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE); + /* FIXME: Redefinition of BIT(3). */ + clk = clk_reg_prcc_kclk("p1_i2c4_kclk", "i2cclk", + U8500_CLKRST1_BASE, BIT(9), CLK_SET_RATE_GATE); + clk = clk_reg_prcc_kclk("p1_msp3_kclk", "msp1clk", + U8500_CLKRST1_BASE, BIT(10), CLK_SET_RATE_GATE); + + /* Periph2 */ + clk = clk_reg_prcc_kclk("p2_i2c3_kclk", "i2cclk", + U8500_CLKRST2_BASE, BIT(0), CLK_SET_RATE_GATE); + + clk = clk_reg_prcc_kclk("p2_sdi4_kclk", "sdmmcclk", + U8500_CLKRST2_BASE, BIT(2), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "sdi4"); + + clk = clk_reg_prcc_kclk("p2_msp2_kclk", "msp02clk", + U8500_CLKRST2_BASE, BIT(3), CLK_SET_RATE_GATE); + + clk = clk_reg_prcc_kclk("p2_sdi1_kclk", "sdmmcclk", + U8500_CLKRST2_BASE, BIT(4), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "sdi1"); + + clk = clk_reg_prcc_kclk("p2_sdi3_kclk", "sdmmcclk", + U8500_CLKRST2_BASE, BIT(5), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "sdi3"); + + /* Note that rate is received from parent. */ + clk = clk_reg_prcc_kclk("p2_ssirx_kclk", "hsirxclk", + U8500_CLKRST2_BASE, BIT(6), + CLK_SET_RATE_GATE|CLK_SET_RATE_PARENT); + clk = clk_reg_prcc_kclk("p2_ssitx_kclk", "hsitxclk", + U8500_CLKRST2_BASE, BIT(7), + CLK_SET_RATE_GATE|CLK_SET_RATE_PARENT); + + /* Periph3 */ + clk = clk_reg_prcc_kclk("p3_ssp0_kclk", "sspclk", + U8500_CLKRST3_BASE, BIT(1), CLK_SET_RATE_GATE); + clk = clk_reg_prcc_kclk("p3_ssp1_kclk", "sspclk", + U8500_CLKRST3_BASE, BIT(2), CLK_SET_RATE_GATE); + clk = clk_reg_prcc_kclk("p3_i2c0_kclk", "i2cclk", + U8500_CLKRST3_BASE, BIT(3), CLK_SET_RATE_GATE); + + clk = clk_reg_prcc_kclk("p3_sdi2_kclk", "sdmmcclk", + U8500_CLKRST3_BASE, BIT(4), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "sdi2"); + + clk = clk_reg_prcc_kclk("p3_ske_kclk", "rtc32k", + U8500_CLKRST3_BASE, BIT(5), CLK_SET_RATE_GATE); + + clk = clk_reg_prcc_kclk("p3_uart2_kclk", "uartclk", + U8500_CLKRST3_BASE, BIT(6), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "uart2"); + + clk = clk_reg_prcc_kclk("p3_sdi5_kclk", "sdmmcclk", + U8500_CLKRST3_BASE, BIT(7), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "sdi5"); + + /* Periph6 */ + clk = clk_reg_prcc_kclk("p3_rng_kclk", "rngclk", + U8500_CLKRST6_BASE, BIT(0), CLK_SET_RATE_GATE); + +} diff --git a/drivers/clk/ux500/u8540_clk.c b/drivers/clk/ux500/u8540_clk.c new file mode 100644 index 00000000000..10adfd2ead2 --- /dev/null +++ b/drivers/clk/ux500/u8540_clk.c @@ -0,0 +1,21 @@ +/* + * Clock definitions for u8540 platform. + * + * Copyright (C) 2012 ST-Ericsson SA + * Author: Ulf Hansson <ulf.hansson@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/mfd/dbx500-prcmu.h> +#include <linux/platform_data/clk-ux500.h> + +#include "clk.h" + +void u8540_clk_init(void) +{ + /* register clocks here */ +} diff --git a/drivers/clk/ux500/u9540_clk.c b/drivers/clk/ux500/u9540_clk.c new file mode 100644 index 00000000000..dbc0191e16c --- /dev/null +++ b/drivers/clk/ux500/u9540_clk.c @@ -0,0 +1,21 @@ +/* + * Clock definitions for u9540 platform. + * + * Copyright (C) 2012 ST-Ericsson SA + * Author: Ulf Hansson <ulf.hansson@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/mfd/dbx500-prcmu.h> +#include <linux/platform_data/clk-ux500.h> + +#include "clk.h" + +void u9540_clk_init(void) +{ + /* register clocks here */ +} diff --git a/drivers/clk/versatile/Makefile b/drivers/clk/versatile/Makefile index 50cf6a2ee69..c0a0f647879 100644 --- a/drivers/clk/versatile/Makefile +++ b/drivers/clk/versatile/Makefile @@ -1,3 +1,4 @@ # Makefile for Versatile-specific clocks obj-$(CONFIG_ICST) += clk-icst.o obj-$(CONFIG_ARCH_INTEGRATOR) += clk-integrator.o +obj-$(CONFIG_ARCH_REALVIEW) += clk-realview.o diff --git a/drivers/clk/versatile/clk-realview.c b/drivers/clk/versatile/clk-realview.c new file mode 100644 index 00000000000..e21a99cef37 --- /dev/null +++ b/drivers/clk/versatile/clk-realview.c @@ -0,0 +1,114 @@ +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/clk-provider.h> + +#include <mach/hardware.h> +#include <mach/platform.h> + +#include "clk-icst.h" + +/* + * Implementation of the ARM RealView clock trees. + */ + +static void __iomem *sys_lock; +static void __iomem *sys_vcoreg; + +/** + * realview_oscvco_get() - get ICST OSC settings for the RealView + */ +static struct icst_vco realview_oscvco_get(void) +{ + u32 val; + struct icst_vco vco; + + val = readl(sys_vcoreg); + vco.v = val & 0x1ff; + vco.r = (val >> 9) & 0x7f; + vco.s = (val >> 16) & 03; + return vco; +} + +static void realview_oscvco_set(struct icst_vco vco) +{ + u32 val; + + val = readl(sys_vcoreg) & ~0x7ffff; + val |= vco.v | (vco.r << 9) | (vco.s << 16); + + /* This magic unlocks the CM VCO so it can be controlled */ + writel(0xa05f, sys_lock); + writel(val, sys_vcoreg); + /* This locks the CM again */ + writel(0, sys_lock); +} + +static const struct icst_params realview_oscvco_params = { + .ref = 24000000, + .vco_max = ICST307_VCO_MAX, + .vco_min = ICST307_VCO_MIN, + .vd_min = 4 + 8, + .vd_max = 511 + 8, + .rd_min = 1 + 2, + .rd_max = 127 + 2, + .s2div = icst307_s2div, + .idx2s = icst307_idx2s, +}; + +static const struct clk_icst_desc __initdata realview_icst_desc = { + .params = &realview_oscvco_params, + .getvco = realview_oscvco_get, + .setvco = realview_oscvco_set, +}; + +/* + * realview_clk_init() - set up the RealView clock tree + */ +void __init realview_clk_init(void __iomem *sysbase, bool is_pb1176) +{ + struct clk *clk; + + sys_lock = sysbase + REALVIEW_SYS_LOCK_OFFSET; + if (is_pb1176) + sys_vcoreg = sysbase + REALVIEW_SYS_OSC0_OFFSET; + else + sys_vcoreg = sysbase + REALVIEW_SYS_OSC4_OFFSET; + + + /* APB clock dummy */ + clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0); + clk_register_clkdev(clk, "apb_pclk", NULL); + + /* 24 MHz clock */ + clk = clk_register_fixed_rate(NULL, "clk24mhz", NULL, CLK_IS_ROOT, + 24000000); + clk_register_clkdev(clk, NULL, "dev:uart0"); + clk_register_clkdev(clk, NULL, "dev:uart1"); + clk_register_clkdev(clk, NULL, "dev:uart2"); + clk_register_clkdev(clk, NULL, "fpga:kmi0"); + clk_register_clkdev(clk, NULL, "fpga:kmi1"); + clk_register_clkdev(clk, NULL, "fpga:mmc0"); + clk_register_clkdev(clk, NULL, "dev:ssp0"); + if (is_pb1176) { + /* + * UART3 is on the dev chip in PB1176 + * UART4 only exists in PB1176 + */ + clk_register_clkdev(clk, NULL, "dev:uart3"); + clk_register_clkdev(clk, NULL, "dev:uart4"); + } else + clk_register_clkdev(clk, NULL, "fpga:uart3"); + + + /* 1 MHz clock */ + clk = clk_register_fixed_rate(NULL, "clk1mhz", NULL, CLK_IS_ROOT, + 1000000); + clk_register_clkdev(clk, NULL, "sp804"); + + /* ICST VCO clock */ + clk = icst_clk_register(NULL, &realview_icst_desc); + clk_register_clkdev(clk, NULL, "dev:clcd"); + clk_register_clkdev(clk, NULL, "issp:clcd"); +} diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 0e63cdd9b52..6b67edbdbd0 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -418,6 +418,9 @@ static struct { static atomic_t ac_wake_req_state = ATOMIC_INIT(0); +/* Functions definition */ +static void compute_armss_rate(void); + /* Spinlocks */ static DEFINE_SPINLOCK(prcmu_lock); static DEFINE_SPINLOCK(clkout_lock); @@ -517,6 +520,7 @@ static struct dsiescclk dsiescclk[3] = { } }; + /* * Used by MCDE to setup all necessary PRCMU registers */ @@ -1013,6 +1017,7 @@ int db8500_prcmu_set_arm_opp(u8 opp) (mb1_transfer.ack.arm_opp != opp)) r = -EIO; + compute_armss_rate(); mutex_unlock(&mb1_transfer.lock); return r; @@ -1612,6 +1617,7 @@ static unsigned long pll_rate(void __iomem *reg, unsigned long src_rate, if ((branch == PLL_FIX) || ((branch == PLL_DIV) && (val & PRCM_PLL_FREQ_DIV2EN) && ((reg == PRCM_PLLSOC0_FREQ) || + (reg == PRCM_PLLARM_FREQ) || (reg == PRCM_PLLDDR_FREQ)))) div *= 2; @@ -1661,6 +1667,39 @@ static unsigned long clock_rate(u8 clock) else return 0; } +static unsigned long latest_armss_rate; +static unsigned long armss_rate(void) +{ + return latest_armss_rate; +} + +static void compute_armss_rate(void) +{ + u32 r; + unsigned long rate; + + r = readl(PRCM_ARM_CHGCLKREQ); + + if (r & PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ) { + /* External ARMCLKFIX clock */ + + rate = pll_rate(PRCM_PLLDDR_FREQ, ROOT_CLOCK_RATE, PLL_FIX); + + /* Check PRCM_ARM_CHGCLKREQ divider */ + if (!(r & PRCM_ARM_CHGCLKREQ_PRCM_ARM_DIVSEL)) + rate /= 2; + + /* Check PRCM_ARMCLKFIX_MGT divider */ + r = readl(PRCM_ARMCLKFIX_MGT); + r &= PRCM_CLK_MGT_CLKPLLDIV_MASK; + rate /= r; + + } else {/* ARM PLL */ + rate = pll_rate(PRCM_PLLARM_FREQ, ROOT_CLOCK_RATE, PLL_DIV); + } + + latest_armss_rate = rate; +} static unsigned long dsiclk_rate(u8 n) { @@ -1707,6 +1746,8 @@ unsigned long prcmu_clock_rate(u8 clock) return pll_rate(PRCM_PLLSOC0_FREQ, ROOT_CLOCK_RATE, PLL_RAW); else if (clock == PRCMU_PLLSOC1) return pll_rate(PRCM_PLLSOC1_FREQ, ROOT_CLOCK_RATE, PLL_RAW); + else if (clock == PRCMU_ARMSS) + return armss_rate(); else if (clock == PRCMU_PLLDDR) return pll_rate(PRCM_PLLDDR_FREQ, ROOT_CLOCK_RATE, PLL_RAW); else if (clock == PRCMU_PLLDSI) @@ -2693,6 +2734,7 @@ void __init db8500_prcmu_early_init(void) handle_simple_irq); set_irq_flags(irq, IRQF_VALID); } + compute_armss_rate(); } static void __init init_prcm_registers(void) diff --git a/drivers/mfd/dbx500-prcmu-regs.h b/drivers/mfd/dbx500-prcmu-regs.h index 23108a6e316..79c76ebdba5 100644 --- a/drivers/mfd/dbx500-prcmu-regs.h +++ b/drivers/mfd/dbx500-prcmu-regs.h @@ -61,7 +61,8 @@ #define PRCM_PLLARM_LOCKP_PRCM_PLLARM_LOCKP3 0x2 #define PRCM_ARM_CHGCLKREQ (_PRCMU_BASE + 0x114) -#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ 0x1 +#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ BIT(0) +#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_DIVSEL BIT(16) #define PRCM_PLLARM_ENABLE (_PRCMU_BASE + 0x98) #define PRCM_PLLARM_ENABLE_PRCM_PLLARM_ENABLE 0x1 @@ -140,6 +141,7 @@ /* PRCMU clock/PLL/reset registers */ #define PRCM_PLLSOC0_FREQ (_PRCMU_BASE + 0x080) #define PRCM_PLLSOC1_FREQ (_PRCMU_BASE + 0x084) +#define PRCM_PLLARM_FREQ (_PRCMU_BASE + 0x088) #define PRCM_PLLDDR_FREQ (_PRCMU_BASE + 0x08C) #define PRCM_PLL_FREQ_D_SHIFT 0 #define PRCM_PLL_FREQ_D_MASK BITS(0, 7) diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 77335fac943..c1273158292 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -26,6 +26,7 @@ #define CLK_IGNORE_UNUSED BIT(3) /* do not gate even if unused */ #define CLK_IS_ROOT BIT(4) /* root clk, has no parent */ #define CLK_IS_BASIC BIT(5) /* Basic clk, can't do a to_clk_foo() */ +#define CLK_GET_RATE_NOCACHE BIT(6) /* do not use the cached clk rate */ struct clk_hw; @@ -360,6 +361,11 @@ int of_clk_add_provider(struct device_node *np, void of_clk_del_provider(struct device_node *np); struct clk *of_clk_src_simple_get(struct of_phandle_args *clkspec, void *data); +struct clk_onecell_data { + struct clk **clks; + unsigned int clk_num; +}; +struct clk *of_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data); const char *of_clk_get_parent_name(struct device_node *np, int index); void of_clk_init(const struct of_device_id *matches); diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h index 5b90e94399e..c410d99bd66 100644 --- a/include/linux/mfd/dbx500-prcmu.h +++ b/include/linux/mfd/dbx500-prcmu.h @@ -136,6 +136,7 @@ enum prcmu_clock { PRCMU_TIMCLK, PRCMU_PLLSOC0, PRCMU_PLLSOC1, + PRCMU_ARMSS, PRCMU_PLLDDR, PRCMU_PLLDSI, PRCMU_DSI0CLK, diff --git a/include/linux/platform_data/clk-realview.h b/include/linux/platform_data/clk-realview.h new file mode 100644 index 00000000000..2e426a7dbc5 --- /dev/null +++ b/include/linux/platform_data/clk-realview.h @@ -0,0 +1 @@ +void realview_clk_init(void __iomem *sysbase, bool is_pb1176); diff --git a/include/linux/platform_data/clk-ux500.h b/include/linux/platform_data/clk-ux500.h new file mode 100644 index 00000000000..3af0da1f3be --- /dev/null +++ b/include/linux/platform_data/clk-ux500.h @@ -0,0 +1,17 @@ +/* + * Clock definitions for ux500 platforms + * + * Copyright (C) 2012 ST-Ericsson SA + * Author: Ulf Hansson <ulf.hansson@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef __CLK_UX500_H +#define __CLK_UX500_H + +void u8500_clk_init(void); +void u9540_clk_init(void); +void u8540_clk_init(void); + +#endif /* __CLK_UX500_H */ |