diff options
| -rw-r--r-- | drivers/ata/libata-scsi.c | 104 |
1 files changed, 51 insertions, 53 deletions
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 5d7a1bd37e9..b4ee28dec52 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -2760,28 +2760,6 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc) goto invalid_fld; /* - * Filter TPM commands by default. These provide an - * essentially uncontrolled encrypted "back door" between - * applications and the disk. Set libata.allow_tpm=1 if you - * have a real reason for wanting to use them. This ensures - * that installed software cannot easily mess stuff up without - * user intent. DVR type users will probably ship with this enabled - * for movie content management. - * - * Note that for ATA8 we can issue a DCS change and DCS freeze lock - * for this and should do in future but that it is not sufficient as - * DCS is an optional feature set. Thus we also do the software filter - * so that we comply with the TC consortium stated goal that the user - * can turn off TC features of their system. - */ - if (tf->command >= 0x5C && tf->command <= 0x5F && !libata_allow_tpm) - goto invalid_fld; - - /* We may not issue DMA commands if no DMA mode is set */ - if (tf->protocol == ATA_PROT_DMA && dev->dma_mode == 0) - goto invalid_fld; - - /* * 12 and 16 byte CDBs use different offsets to * provide the various register values. */ @@ -2830,6 +2808,41 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc) tf->device = dev->devno ? tf->device | ATA_DEV1 : tf->device & ~ATA_DEV1; + /* READ/WRITE LONG use a non-standard sect_size */ + qc->sect_size = ATA_SECT_SIZE; + switch (tf->command) { + case ATA_CMD_READ_LONG: + case ATA_CMD_READ_LONG_ONCE: + case ATA_CMD_WRITE_LONG: + case ATA_CMD_WRITE_LONG_ONCE: + if (tf->protocol != ATA_PROT_PIO || tf->nsect != 1) + goto invalid_fld; + qc->sect_size = scsi_bufflen(scmd); + } + + /* + * Set flags so that all registers will be written, pass on + * write indication (used for PIO/DMA setup), result TF is + * copied back and we don't whine too much about its failure. + */ + tf->flags = ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + if (scmd->sc_data_direction == DMA_TO_DEVICE) + tf->flags |= ATA_TFLAG_WRITE; + + qc->flags |= ATA_QCFLAG_RESULT_TF | ATA_QCFLAG_QUIET; + + /* + * Set transfer length. + * + * TODO: find out if we need to do more here to + * cover scatter/gather case. + */ + ata_qc_set_pc_nbytes(qc); + + /* We may not issue DMA commands if no DMA mode is set */ + if (tf->protocol == ATA_PROT_DMA && dev->dma_mode == 0) + goto invalid_fld; + /* sanity check for pio multi commands */ if ((cdb[1] & 0xe0) && !is_multi_taskfile(tf)) goto invalid_fld; @@ -2846,18 +2859,6 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc) multi_count); } - /* READ/WRITE LONG use a non-standard sect_size */ - qc->sect_size = ATA_SECT_SIZE; - switch (tf->command) { - case ATA_CMD_READ_LONG: - case ATA_CMD_READ_LONG_ONCE: - case ATA_CMD_WRITE_LONG: - case ATA_CMD_WRITE_LONG_ONCE: - if (tf->protocol != ATA_PROT_PIO || tf->nsect != 1) - goto invalid_fld; - qc->sect_size = scsi_bufflen(scmd); - } - /* * Filter SET_FEATURES - XFER MODE command -- otherwise, * SET_FEATURES - XFER MODE must be preceded/succeeded @@ -2865,30 +2866,27 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc) * controller (i.e. the reason for ->set_piomode(), * ->set_dmamode(), and ->post_set_mode() hooks). */ - if ((tf->command == ATA_CMD_SET_FEATURES) - && (tf->feature == SETFEATURES_XFER)) + if (tf->command == ATA_CMD_SET_FEATURES && + tf->feature == SETFEATURES_XFER) goto invalid_fld; /* - * Set flags so that all registers will be written, - * and pass on write indication (used for PIO/DMA - * setup.) - */ - tf->flags |= (ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE); - - if (scmd->sc_data_direction == DMA_TO_DEVICE) - tf->flags |= ATA_TFLAG_WRITE; - - /* - * Set transfer length. + * Filter TPM commands by default. These provide an + * essentially uncontrolled encrypted "back door" between + * applications and the disk. Set libata.allow_tpm=1 if you + * have a real reason for wanting to use them. This ensures + * that installed software cannot easily mess stuff up without + * user intent. DVR type users will probably ship with this enabled + * for movie content management. * - * TODO: find out if we need to do more here to - * cover scatter/gather case. + * Note that for ATA8 we can issue a DCS change and DCS freeze lock + * for this and should do in future but that it is not sufficient as + * DCS is an optional feature set. Thus we also do the software filter + * so that we comply with the TC consortium stated goal that the user + * can turn off TC features of their system. */ - ata_qc_set_pc_nbytes(qc); - - /* request result TF and be quiet about device error */ - qc->flags |= ATA_QCFLAG_RESULT_TF | ATA_QCFLAG_QUIET; + if (tf->command >= 0x5C && tf->command <= 0x5F && !libata_allow_tpm) + goto invalid_fld; return 0; |