diff options
1269 files changed, 26351 insertions, 21345 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-scsi_host b/Documentation/ABI/testing/sysfs-class-scsi_host new file mode 100644 index 00000000000..29a4f892e43 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-scsi_host @@ -0,0 +1,13 @@ +What: /sys/class/scsi_host/hostX/isci_id +Date: June 2011 +Contact: Dave Jiang <dave.jiang@intel.com> +Description: + This file contains the enumerated host ID for the Intel + SCU controller. The Intel(R) C600 Series Chipset SATA/SAS + Storage Control Unit embeds up to two 4-port controllers in + a single PCI device. The controllers are enumerated in order + which usually means the lowest number scsi_host corresponds + with the first controller, but this association is not + guaranteed. The 'isci_id' attribute unambiguously identifies + the controller index: '0' for the first controller, + '1' for the second. diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml index 85164016ed2..23fdf79f8cf 100644 --- a/Documentation/DocBook/media/v4l/controls.xml +++ b/Documentation/DocBook/media/v4l/controls.xml @@ -1455,7 +1455,7 @@ Applicable to the H264 encoder.</entry> </row> <row><entry></entry></row> - <row> + <row id="v4l2-mpeg-video-h264-vui-sar-idc"> <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC</constant> </entry> <entry>enum v4l2_mpeg_video_h264_vui_sar_idc</entry> </row> @@ -1561,7 +1561,7 @@ Applicable to the H264 encoder.</entry> </row> <row><entry></entry></row> - <row> + <row id="v4l2-mpeg-video-h264-level"> <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_LEVEL</constant> </entry> <entry>enum v4l2_mpeg_video_h264_level</entry> </row> @@ -1641,7 +1641,7 @@ Possible values are:</entry> </row> <row><entry></entry></row> - <row> + <row id="v4l2-mpeg-video-mpeg4-level"> <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL</constant> </entry> <entry>enum v4l2_mpeg_video_mpeg4_level</entry> </row> @@ -1689,9 +1689,9 @@ Possible values are:</entry> </row> <row><entry></entry></row> - <row> + <row id="v4l2-mpeg-video-h264-profile"> <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_PROFILE</constant> </entry> - <entry>enum v4l2_mpeg_h264_profile</entry> + <entry>enum v4l2_mpeg_video_h264_profile</entry> </row> <row><entry spanname="descr">The profile information for H264. Applicable to the H264 encoder. @@ -1774,9 +1774,9 @@ Possible values are:</entry> </row> <row><entry></entry></row> - <row> + <row id="v4l2-mpeg-video-mpeg4-profile"> <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE</constant> </entry> - <entry>enum v4l2_mpeg_mpeg4_profile</entry> + <entry>enum v4l2_mpeg_video_mpeg4_profile</entry> </row> <row><entry spanname="descr">The profile information for MPEG4. Applicable to the MPEG4 encoder. @@ -1820,9 +1820,9 @@ Applicable to the encoder. </row> <row><entry></entry></row> - <row> + <row id="v4l2-mpeg-video-multi-slice-mode"> <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE</constant> </entry> - <entry>enum v4l2_mpeg_multi_slice_mode</entry> + <entry>enum v4l2_mpeg_video_multi_slice_mode</entry> </row> <row><entry spanname="descr">Determines how the encoder should handle division of frame into slices. Applicable to the encoder. @@ -1868,9 +1868,9 @@ Applicable to the encoder.</entry> </row> <row><entry></entry></row> - <row> + <row id="v4l2-mpeg-video-h264-loop-filter-mode"> <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE</constant> </entry> - <entry>enum v4l2_mpeg_h264_loop_filter_mode</entry> + <entry>enum v4l2_mpeg_video_h264_loop_filter_mode</entry> </row> <row><entry spanname="descr">Loop filter mode for H264 encoder. Possible values are:</entry> @@ -1913,9 +1913,9 @@ Applicable to the H264 encoder.</entry> </row> <row><entry></entry></row> - <row> + <row id="v4l2-mpeg-video-h264-entropy-mode"> <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE</constant> </entry> - <entry>enum v4l2_mpeg_h264_symbol_mode</entry> + <entry>enum v4l2_mpeg_video_h264_entropy_mode</entry> </row> <row><entry spanname="descr">Entropy coding mode for H264 - CABAC/CAVALC. Applicable to the H264 encoder. @@ -2140,9 +2140,9 @@ previous frames. Applicable to the H264 encoder.</entry> </row> <row><entry></entry></row> - <row> + <row id="v4l2-mpeg-video-header-mode"> <entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_HEADER_MODE</constant> </entry> - <entry>enum v4l2_mpeg_header_mode</entry> + <entry>enum v4l2_mpeg_video_header_mode</entry> </row> <row><entry spanname="descr">Determines whether the header is returned as the first buffer or is it returned together with the first frame. Applicable to encoders. @@ -2320,9 +2320,9 @@ Valid only when H.264 and macroblock level RC is enabled (<constant>V4L2_CID_MPE Applicable to the H264 encoder.</entry> </row> <row><entry></entry></row> - <row> + <row id="v4l2-mpeg-mfc51-video-frame-skip-mode"> <entry spanname="id"><constant>V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE</constant> </entry> - <entry>enum v4l2_mpeg_mfc51_frame_skip_mode</entry> + <entry>enum v4l2_mpeg_mfc51_video_frame_skip_mode</entry> </row> <row><entry spanname="descr"> Indicates in what conditions the encoder should skip frames. If encoding a frame would cause the encoded stream to be larger then @@ -2361,9 +2361,9 @@ the stream will meet tight bandwidth contraints. Applicable to encoders. </entry> </row> <row><entry></entry></row> - <row> + <row id="v4l2-mpeg-mfc51-video-force-frame-type"> <entry spanname="id"><constant>V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE</constant> </entry> - <entry>enum v4l2_mpeg_mfc51_force_frame_type</entry> + <entry>enum v4l2_mpeg_mfc51_video_force_frame_type</entry> </row> <row><entry spanname="descr">Force a frame type for the next queued buffer. Applicable to encoders. Possible values are:</entry> diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt index 6f3c598971f..06eb6d957c8 100644 --- a/Documentation/cgroups/memory.txt +++ b/Documentation/cgroups/memory.txt @@ -380,7 +380,7 @@ will be charged as a new owner of it. 5.2 stat file -5.2.1 memory.stat file includes following statistics +memory.stat file includes following statistics # per-memory cgroup local status cache - # of bytes of page cache memory. @@ -438,89 +438,6 @@ Note: file_mapped is accounted only when the memory cgroup is owner of page cache.) -5.2.2 memory.vmscan_stat - -memory.vmscan_stat includes statistics information for memory scanning and -freeing, reclaiming. The statistics shows memory scanning information since -memory cgroup creation and can be reset to 0 by writing 0 as - - #echo 0 > ../memory.vmscan_stat - -This file contains following statistics. - -[param]_[file_or_anon]_pages_by_[reason]_[under_heararchy] -[param]_elapsed_ns_by_[reason]_[under_hierarchy] - -For example, - - scanned_file_pages_by_limit indicates the number of scanned - file pages at vmscan. - -Now, 3 parameters are supported - - scanned - the number of pages scanned by vmscan - rotated - the number of pages activated at vmscan - freed - the number of pages freed by vmscan - -If "rotated" is high against scanned/freed, the memcg seems busy. - -Now, 2 reason are supported - - limit - the memory cgroup's limit - system - global memory pressure + softlimit - (global memory pressure not under softlimit is not handled now) - -When under_hierarchy is added in the tail, the number indicates the -total memcg scan of its children and itself. - -elapsed_ns is a elapsed time in nanosecond. This may include sleep time -and not indicates CPU usage. So, please take this as just showing -latency. - -Here is an example. - -# cat /cgroup/memory/A/memory.vmscan_stat -scanned_pages_by_limit 9471864 -scanned_anon_pages_by_limit 6640629 -scanned_file_pages_by_limit 2831235 -rotated_pages_by_limit 4243974 -rotated_anon_pages_by_limit 3971968 -rotated_file_pages_by_limit 272006 -freed_pages_by_limit 2318492 -freed_anon_pages_by_limit 962052 -freed_file_pages_by_limit 1356440 -elapsed_ns_by_limit 351386416101 -scanned_pages_by_system 0 -scanned_anon_pages_by_system 0 -scanned_file_pages_by_system 0 -rotated_pages_by_system 0 -rotated_anon_pages_by_system 0 -rotated_file_pages_by_system 0 -freed_pages_by_system 0 -freed_anon_pages_by_system 0 -freed_file_pages_by_system 0 -elapsed_ns_by_system 0 -scanned_pages_by_limit_under_hierarchy 9471864 -scanned_anon_pages_by_limit_under_hierarchy 6640629 -scanned_file_pages_by_limit_under_hierarchy 2831235 -rotated_pages_by_limit_under_hierarchy 4243974 -rotated_anon_pages_by_limit_under_hierarchy 3971968 -rotated_file_pages_by_limit_under_hierarchy 272006 -freed_pages_by_limit_under_hierarchy 2318492 -freed_anon_pages_by_limit_under_hierarchy 962052 -freed_file_pages_by_limit_under_hierarchy 1356440 -elapsed_ns_by_limit_under_hierarchy 351386416101 -scanned_pages_by_system_under_hierarchy 0 -scanned_anon_pages_by_system_under_hierarchy 0 -scanned_file_pages_by_system_under_hierarchy 0 -rotated_pages_by_system_under_hierarchy 0 -rotated_anon_pages_by_system_under_hierarchy 0 -rotated_file_pages_by_system_under_hierarchy 0 -freed_pages_by_system_under_hierarchy 0 -freed_anon_pages_by_system_under_hierarchy 0 -freed_file_pages_by_system_under_hierarchy 0 -elapsed_ns_by_system_under_hierarchy 0 - 5.3 swappiness Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only. diff --git a/Documentation/devicetree/bindings/arm/omap/dsp.txt b/Documentation/devicetree/bindings/arm/omap/dsp.txt new file mode 100644 index 00000000000..d3830a32ce0 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/omap/dsp.txt @@ -0,0 +1,14 @@ +* TI - DSP (Digital Signal Processor) + +TI DSP included in OMAP SoC + +Required properties: +- compatible : Should be "ti,omap3-c64" for OMAP3 & 4 +- ti,hwmods: "dsp" + +Examples: + +dsp { + compatible = "ti,omap3-c64"; + ti,hwmods = "dsp"; +}; diff --git a/Documentation/devicetree/bindings/arm/omap/iva.txt b/Documentation/devicetree/bindings/arm/omap/iva.txt new file mode 100644 index 00000000000..6d629517135 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/omap/iva.txt @@ -0,0 +1,19 @@ +* TI - IVA (Imaging and Video Accelerator) subsystem + +The IVA contain various audio, video or imaging HW accelerator +depending of the version. + +Required properties: +- compatible : Should be: + - "ti,ivahd" for OMAP4 + - "ti,iva2.2" for OMAP3 + - "ti,iva2.1" for OMAP2430 + - "ti,iva1" for OMAP2420 +- ti,hwmods: "iva" + +Examples: + +iva { + compatible = "ti,ivahd", "ti,iva"; + ti,hwmods = "iva"; +}; diff --git a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt new file mode 100644 index 00000000000..6888a5efc86 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt @@ -0,0 +1,19 @@ +* TI - L3 Network On Chip (NoC) + +This version is an implementation of the generic NoC IP +provided by Arteris. + +Required properties: +- compatible : Should be "ti,omap3-l3-smx" for OMAP3 family + Should be "ti,omap4-l3-noc" for OMAP4 family +- ti,hwmods: "l3_main_1", ... One hwmod for each noc domain. + +Examples: + +ocp { + compatible = "ti,omap4-l3-noc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; +}; diff --git a/Documentation/devicetree/bindings/arm/omap/mpu.txt b/Documentation/devicetree/bindings/arm/omap/mpu.txt new file mode 100644 index 00000000000..1a5a42ce21b --- /dev/null +++ b/Documentation/devicetree/bindings/arm/omap/mpu.txt @@ -0,0 +1,27 @@ +* TI - MPU (Main Processor Unit) subsystem + +The MPU subsystem contain one or several ARM cores +depending of the version. +The MPU contain CPUs, GIC, L2 cache and a local PRCM. + +Required properties: +- compatible : Should be "ti,omap3-mpu" for OMAP3 + Should be "ti,omap4-mpu" for OMAP4 +- ti,hwmods: "mpu" + +Examples: + +- For an OMAP4 SMP system: + +mpu { + compatible = "ti,omap4-mpu"; + ti,hwmods = "mpu"; +}; + + +- For an OMAP3 monocore system: + +mpu { + compatible = "ti,omap3-mpu"; + ti,hwmods = "mpu"; +}; diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt new file mode 100644 index 00000000000..dbdab40ed3a --- /dev/null +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -0,0 +1,43 @@ +* Texas Instruments OMAP + +OMAP is currently using a static file per SoC family to describe the +IPs present in the SoC. +On top of that an omap_device is created to extend the platform_device +capabilities and to allow binding with one or several hwmods. +The hwmods will contain all the information to build the device: +adresse range, irq lines, dma lines, interconnect, PRCM register, +clock domain, input clocks. +For the moment just point to the existing hwmod, the next step will be +to move data from hwmod to device-tree representation. + + +Required properties: +- compatible: Every devices present in OMAP SoC should be in the + form: "ti,XXX" +- ti,hwmods: list of hwmod names (ascii strings), that comes from the OMAP + HW documentation, attached to a device. Must contain at least + one hwmod. + +Optional properties: +- ti,no_idle_on_suspend: When present, it prevents the PM to idle the module + during suspend. + + +Example: + +spinlock@1 { + compatible = "ti,omap4-spinlock"; + ti,hwmods = "spinlock"; +}; + + +Boards: + +- OMAP3 BeagleBoard : Low cost community board + compatible = "ti,omap3-beagle", "ti,omap3" + +- OMAP4 SDP : Software Developement Board + compatible = "ti,omap4-sdp", "ti,omap4430" + +- OMAP4 PandaBoard : Low cost community board + compatible = "ti,omap4-panda", "ti,omap4430" diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index c4a6e148732..4dc46547766 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -592,3 +592,11 @@ Why: In 3.0, we can now autodetect internal 3G device and already have interface that was used by acer-wmi driver. It will replaced by information log when acer-wmi initial. Who: Lee, Chun-Yi <jlee@novell.com> + +---------------------------- +What: The XFS nodelaylog mount option +When: 3.3 +Why: The delaylog mode that has been the default since 2.6.39 has proven + stable, and the old code is in the way of additional improvements in + the log code. +Who: Christoph Hellwig <hch@lst.de> diff --git a/Documentation/hwmon/coretemp b/Documentation/hwmon/coretemp index fa8776ab9b1..84d46c0c71a 100644 --- a/Documentation/hwmon/coretemp +++ b/Documentation/hwmon/coretemp @@ -35,13 +35,6 @@ the Out-Of-Spec bit. Following table summarizes the exported sysfs files: All Sysfs entries are named with their core_id (represented here by 'X'). tempX_input - Core temperature (in millidegrees Celsius). tempX_max - All cooling devices should be turned on (on Core2). - Initialized with IA32_THERM_INTERRUPT. When the CPU - temperature reaches this temperature, an interrupt is - generated and tempX_max_alarm is set. -tempX_max_hyst - If the CPU temperature falls below than temperature, - an interrupt is generated and tempX_max_alarm is reset. -tempX_max_alarm - Set if the temperature reaches or exceeds tempX_max. - Reset if the temperature drops to or below tempX_max_hyst. tempX_crit - Maximum junction temperature (in millidegrees Celsius). tempX_crit_alarm - Set when Out-of-spec bit is set, never clears. Correct CPU operation is no longer guaranteed. @@ -49,9 +42,10 @@ tempX_label - Contains string "Core X", where X is processor number. For Package temp, this will be "Physical id Y", where Y is the package number. -The TjMax temperature is set to 85 degrees C if undocumented model specific -register (UMSR) 0xee has bit 30 set. If not the TjMax is 100 degrees C as -(sometimes) documented in processor datasheet. +On CPU models which support it, TjMax is read from a model-specific register. +On other models, it is set to an arbitrary value based on weak heuristics. +If these heuristics don't work for you, you can pass the correct TjMax value +as a module parameter (tjmax). Appendix A. Known TjMax lists (TBD): Some information comes from ark.intel.com diff --git a/Documentation/hwmon/max16065 b/Documentation/hwmon/max16065 index 44b4f61e04f..c11f64a1f2a 100644 --- a/Documentation/hwmon/max16065 +++ b/Documentation/hwmon/max16065 @@ -62,6 +62,13 @@ can be safely used to identify the chip. You will have to instantiate the devices explicitly. Please see Documentation/i2c/instantiating-devices for details. +WARNING: Do not access chip registers using the i2cdump command, and do not use +any of the i2ctools commands on a command register (0xa5 to 0xac). The chips +supported by this driver interpret any access to a command register (including +read commands) as request to execute the command in question. This may result in +power loss, board resets, and/or Flash corruption. Worst case, your board may +turn into a brick. + Sysfs entries ------------- diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index 845a191004b..54078ed96b3 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -319,4 +319,6 @@ Code Seq#(hex) Include File Comments <mailto:thomas@winischhofer.net> 0xF4 00-1F video/mbxfb.h mbxfb <mailto:raph@8d.com> +0xF6 all LTTng Linux Trace Toolkit Next Generation + <mailto:mathieu.desnoyers@efficios.com> 0xFD all linux/dm-ioctl.h diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 614d0382e2c..854ed5ca7e3 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2086,9 +2086,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted. Override pmtimer IOPort with a hex value. e.g. pmtmr=0x508 - pnp.debug [PNP] - Enable PNP debug messages. This depends on the - CONFIG_PNP_DEBUG_MESSAGES option. + pnp.debug=1 [PNP] + Enable PNP debug messages (depends on the + CONFIG_PNP_DEBUG_MESSAGES option). Change at run-time + via /sys/module/pnp/parameters/debug. We always show + current resource usage; turning this on also shows + possible settings and some assignment information. pnpacpi= [ACPI] { off } diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX index 4edd78dfb36..bbce1215434 100644 --- a/Documentation/networking/00-INDEX +++ b/Documentation/networking/00-INDEX @@ -1,13 +1,21 @@ 00-INDEX - this file +3c359.txt + - information on the 3Com TokenLink Velocity XL (3c5359) driver. 3c505.txt - information on the 3Com EtherLink Plus (3c505) driver. +3c509.txt + - information on the 3Com Etherlink III Series Ethernet cards. 6pack.txt - info on the 6pack protocol, an alternative to KISS for AX.25 DLINK.txt - info on the D-Link DE-600/DE-620 parallel port pocket adapters PLIP.txt - PLIP: The Parallel Line Internet Protocol device driver +README.ipw2100 + - README for the Intel PRO/Wireless 2100 driver. +README.ipw2200 + - README for the Intel PRO/Wireless 2915ABG and 2200BG driver. README.sb1000 - info on General Instrument/NextLevel SURFboard1000 cable modem. alias.txt @@ -20,8 +28,12 @@ atm.txt - info on where to get ATM programs and support for Linux. ax25.txt - info on using AX.25 and NET/ROM code for Linux +batman-adv.txt + - B.A.T.M.A.N routing protocol on top of layer 2 Ethernet Frames. baycom.txt - info on the driver for Baycom style amateur radio modems +bonding.txt + - Linux Ethernet Bonding Driver HOWTO: link aggregation in Linux. bridge.txt - where to get user space programs for ethernet bridging with Linux. can.txt @@ -34,32 +46,60 @@ cxacru.txt - Conexant AccessRunner USB ADSL Modem cxacru-cf.py - Conexant AccessRunner USB ADSL Modem configuration file parser +cxgb.txt + - Release Notes for the Chelsio N210 Linux device driver. +dccp.txt + - the Datagram Congestion Control Protocol (DCCP) (RFC 4340..42). de4x5.txt - the Digital EtherWORKS DE4?? and DE5?? PCI Ethernet driver decnet.txt - info on using the DECnet networking layer in Linux. depca.txt - the Digital DEPCA/EtherWORKS DE1?? and DE2?? LANCE Ethernet driver +dl2k.txt + - README for D-Link DL2000-based Gigabit Ethernet Adapters (dl2k.ko). +dm9000.txt + - README for the Simtec DM9000 Network driver. dmfe.txt - info on the Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver. +dns_resolver.txt + - The DNS resolver module allows kernel servies to make DNS queries. +driver.txt + - Softnet driver issues. e100.txt - info on Intel's EtherExpress PRO/100 line of 10/100 boards e1000.txt - info on Intel's E1000 line of gigabit ethernet boards +e1000e.txt + - README for the Intel Gigabit Ethernet Driver (e1000e). eql.txt - serial IP load balancing ewrk3.txt - the Digital EtherWORKS 3 DE203/4/5 Ethernet driver +fib_trie.txt + - Level Compressed Trie (LC-trie) notes: a structure for routing. filter.txt - Linux Socket Filtering fore200e.txt - FORE Systems PCA-200E/SBA-200E ATM NIC driver info. framerelay.txt - info on using Frame Relay/Data Link Connection Identifier (DLCI). +gen_stats.txt + - Generic networking statistics for netlink users. +generic_hdlc.txt + - The generic High Level Data Link Control (HDLC) layer. generic_netlink.txt - info on Generic Netlink +gianfar.txt + - Gianfar Ethernet Driver. ieee802154.txt - Linux IEEE 802.15.4 implementation, API and drivers +ifenslave.c + - Configure network interfaces for parallel routing (bonding). +igb.txt + - README for the Intel Gigabit Ethernet Driver (igb). +igbvf.txt + - README for the Intel Gigabit Ethernet Driver (igbvf). ip-sysctl.txt - /proc/sys/net/ipv4/* variables ip_dynaddr.txt @@ -68,41 +108,117 @@ ipddp.txt - AppleTalk-IP Decapsulation and AppleTalk-IP Encapsulation iphase.txt - Interphase PCI ATM (i)Chip IA Linux driver info. +ipv6.txt + - Options to the ipv6 kernel module. +ipvs-sysctl.txt + - Per-inode explanation of the /proc/sys/net/ipv4/vs interface. irda.txt - where to get IrDA (infrared) utilities and info for Linux. +ixgb.txt + - README for the Intel 10 Gigabit Ethernet Driver (ixgb). +ixgbe.txt + - README for the Intel 10 Gigabit Ethernet Driver (ixgbe). +ixgbevf.txt + - README for the Intel Virtual Function (VF) Driver (ixgbevf). +l2tp.txt + - User guide to the L2TP tunnel protocol. lapb-module.txt - programming information of the LAPB module. ltpc.txt - the Apple or Farallon LocalTalk PC card driver +mac80211-injection.txt + - HOWTO use packet injection with mac80211 multicast.txt - Behaviour of cards under Multicast +multiqueue.txt + - HOWTO for multiqueue network device support. +netconsole.txt + - The network console module netconsole.ko: configuration and notes. +netdev-features.txt + - Network interface features API description. netdevices.txt - info on network device driver functions exported to the kernel. +netif-msg.txt + - Design of the network interface message level setting (NETIF_MSG_*). +nfc.txt + - The Linux Near Field Communication (NFS) subsystem. olympic.txt - IBM PCI Pit/Pit-Phy/Olympic Token Ring driver info. +operstates.txt + - Overview of network interface operational states. +packet_mmap.txt + - User guide to memory mapped packet socket rings (PACKET_[RT]X_RING). +phonet.txt + - The Phonet packet protocol used in Nokia cellular modems. +phy.txt + - The PHY abstraction layer. +pktgen.txt + - User guide to the kernel packet generator (pktgen.ko). policy-routing.txt - IP policy-based routing +ppp_generic.txt + - Information about the generic PPP driver. +proc_net_tcp.txt + - Per inode overview of the /proc/net/tcp and /proc/net/tcp6 interfaces. +radiotap-headers.txt + - Background on radiotap headers. ray_cs.txt - Raylink Wireless LAN card driver info. +rds.txt + - Background on the reliable, ordered datagram delivery method RDS. +regulatory.txt + - Overview of the Linux wireless regulatory infrastructure. +rxrpc.txt + - Guide to the RxRPC protocol. +s2io.txt + - Release notes for Neterion Xframe I/II 10GbE driver. +scaling.txt + - Explanation of network scaling techniques: RSS, RPS, RFS, aRFS, XPS. +sctp.txt + - Notes on the Linux kernel implementation of the SCTP protocol. +secid.txt + - Explanation of the secid member in flow structures. skfp.txt - SysKonnect FDDI (SK-5xxx, Compaq Netelligent) driver info. smc9.txt - the driver for SMC's 9000 series of Ethernet cards smctr.txt - SMC TokenCard TokenRing Linux driver info. +spider-net.txt + - README for the Spidernet Driver (as found in PS3 / Cell BE). +stmmac.txt + - README for the STMicro Synopsys Ethernet driver. +tc-actions-env-rules.txt + - rules for traffic control (tc) actions. +timestamping.txt + - overview of network packet timestamping variants. tcp.txt - short blurb on how TCP output takes place. +tcp-thin.txt + - kernel tuning options for low rate 'thin' TCP streams. tlan.txt - ThunderLAN (Compaq Netelligent 10/100, Olicom OC-2xxx) driver info. tms380tr.txt - SysKonnect Token Ring ISA/PCI adapter driver info. +tproxy.txt + - Transparent proxy support user guide. tuntap.txt - TUN/TAP device driver, allowing user space Rx/Tx of packets. +udplite.txt + - UDP-Lite protocol (RFC 3828) introduction. vortex.txt - info on using 3Com Vortex (3c590, 3c592, 3c595, 3c597) Ethernet cards. +vxge.txt + - README for the Neterion X3100 PCIe Server Adapter. x25.txt - general info on X.25 development. x25-iface.txt - description of the X.25 Packet Layer to LAPB device interface. +xfrm_proc.txt + - description of the statistics package for XFRM. +xfrm_sync.txt + - sync patches for XFRM enable migration of an SA between hosts. +xfrm_sysctl.txt + - description of the XFRM configuration options. z8530drv.txt - info about Linux driver for Z8530 based HDLC cards for AX.25 diff --git a/Documentation/networking/dmfe.txt b/Documentation/networking/dmfe.txt index 8006c227fda..25320bf19c8 100644 --- a/Documentation/networking/dmfe.txt +++ b/Documentation/networking/dmfe.txt @@ -1,3 +1,5 @@ +Note: This driver doesn't have a maintainer. + Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver for Linux. This program is free software; you can redistribute it and/or @@ -55,7 +57,6 @@ Test and make sure PCI latency is now correct for all cases. Authors: Sten Wang <sten_wang@davicom.com.tw > : Original Author -Tobias Ringstrom <tori@unhappy.mine.nu> : Current Maintainer Contributors: diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index db2a4067013..81546990f41 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -992,7 +992,7 @@ bindv6only - BOOLEAN TRUE: disable IPv4-mapped address feature FALSE: enable IPv4-mapped address feature - Default: FALSE (as specified in RFC2553bis) + Default: FALSE (as specified in RFC3493) IPv6 Fragmentation: diff --git a/Documentation/networking/scaling.txt b/Documentation/networking/scaling.txt index 7254b4b5910..58fd7414e6c 100644 --- a/Documentation/networking/scaling.txt +++ b/Documentation/networking/scaling.txt @@ -52,7 +52,8 @@ module parameter for specifying the number of hardware queues to configure. In the bnx2x driver, for instance, this parameter is called num_queues. A typical RSS configuration would be to have one receive queue for each CPU if the device supports enough queues, or otherwise at least -one for each cache domain at a particular cache level (L1, L2, etc.). +one for each memory domain, where a memory domain is a set of CPUs that +share a particular memory level (L1, L2, NUMA node, etc.). The indirection table of an RSS device, which resolves a queue by masked hash, is usually programmed by the driver at initialization. The @@ -82,11 +83,17 @@ RSS should be enabled when latency is a concern or whenever receive interrupt processing forms a bottleneck. Spreading load between CPUs decreases queue length. For low latency networking, the optimal setting is to allocate as many queues as there are CPUs in the system (or the -NIC maximum, if lower). Because the aggregate number of interrupts grows -with each additional queue, the most efficient high-rate configuration +NIC maximum, if lower). The most efficient high-rate configuration is likely the one with the smallest number of receive queues where no -CPU that processes receive interrupts reaches 100% utilization. Per-cpu -load can be observed using the mpstat utility. +receive queue overflows due to a saturated CPU, because in default +mode with interrupt coalescing enabled, the aggregate number of +interrupts (and thus work) grows with each additional queue. + +Per-cpu load can be observed using the mpstat utility, but note that on +processors with hyperthreading (HT), each hyperthread is represented as +a separate CPU. For interrupt handling, HT has shown no benefit in +initial tests, so limit the number of queues to the number of CPU cores +in the system. RPS: Receive Packet Steering @@ -145,7 +152,7 @@ the bitmap. == Suggested Configuration For a single queue device, a typical RPS configuration would be to set -the rps_cpus to the CPUs in the same cache domain of the interrupting +the rps_cpus to the CPUs in the same memory domain of the interrupting CPU. If NUMA locality is not an issue, this could also be all CPUs in the system. At high interrupt rate, it might be wise to exclude the interrupting CPU from the map since that already performs much work. @@ -154,7 +161,7 @@ For a multi-queue system, if RSS is configured so that a hardware receive queue is mapped to each CPU, then RPS is probably redundant and unnecessary. If there are fewer hardware queues than CPUs, then RPS might be beneficial if the rps_cpus for each queue are the ones that -share the same cache domain as the interrupting CPU for that queue. +share the same memory domain as the interrupting CPU for that queue. RFS: Receive Flow Steering @@ -326,7 +333,7 @@ The queue chosen for transmitting a particular flow is saved in the corresponding socket structure for the flow (e.g. a TCP connection). This transmit queue is used for subsequent packets sent on the flow to prevent out of order (ooo) packets. The choice also amortizes the cost -of calling get_xps_queues() over all packets in the connection. To avoid +of calling get_xps_queues() over all packets in the flow. To avoid ooo packets, the queue for a flow can subsequently only be changed if skb->ooo_okay is set for a packet in the flow. This flag indicates that there are no outstanding packets in the flow, so the transmit queue can diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt index 4ce5450ab6e..6066e3a6b9a 100644 --- a/Documentation/power/runtime_pm.txt +++ b/Documentation/power/runtime_pm.txt @@ -431,8 +431,7 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h: void pm_runtime_irq_safe(struct device *dev); - set the power.irq_safe flag for the device, causing the runtime-PM - suspend and resume callbacks (but not the idle callback) to be invoked - with interrupts disabled + callbacks to be invoked with interrupts off void pm_runtime_mark_last_busy(struct device *dev); - set the power.last_busy field to the current time diff --git a/Documentation/vm/transhuge.txt b/Documentation/vm/transhuge.txt index 0924aaca330..29bdf62aac0 100644 --- a/Documentation/vm/transhuge.txt +++ b/Documentation/vm/transhuge.txt @@ -123,10 +123,11 @@ be automatically shutdown if it's set to "never". khugepaged runs usually at low frequency so while one may not want to invoke defrag algorithms synchronously during the page faults, it should be worth invoking defrag at least in khugepaged. However it's -also possible to disable defrag in khugepaged: +also possible to disable defrag in khugepaged by writing 0 or enable +defrag in khugepaged by writing 1: -echo yes >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag -echo no >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag +echo 0 >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag +echo 1 >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag You can also control how many pages khugepaged should scan at each pass: diff --git a/MAINTAINERS b/MAINTAINERS index 069ee3b5c65..ae8820e173a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1278,7 +1278,6 @@ F: drivers/input/misc/ati_remote2.c ATLX ETHERNET DRIVERS M: Jay Cliburn <jcliburn@gmail.com> M: Chris Snook <chris.snook@gmail.com> -M: Jie Yang <jie.yang@atheros.com> L: netdev@vger.kernel.org W: http://sourceforge.net/projects/atl1 W: http://atl1.sourceforge.net @@ -1574,7 +1573,6 @@ F: drivers/scsi/bfa/ BROCADE BNA 10 GIGABIT ETHERNET DRIVER M: Rasesh Mody <rmody@brocade.com> -M: Debashis Dutt <ddutt@brocade.com> L: netdev@vger.kernel.org S: Supported F: drivers/net/bna/ @@ -1758,7 +1756,6 @@ F: Documentation/zh_CN/ CISCO VIC ETHERNET NIC DRIVER M: Christian Benvenuti <benve@cisco.com> -M: Vasanthy Kolluri <vkolluri@cisco.com> M: Roopa Prabhu <roprabhu@cisco.com> M: David Wang <dwang2@cisco.com> S: Supported @@ -1883,7 +1880,7 @@ S: Maintained F: drivers/connector/ CONTROL GROUPS (CGROUPS) -M: Paul Menage <menage@google.com> +M: Paul Menage <paul@paulmenage.org> M: Li Zefan <lizf@cn.fujitsu.com> L: containers@lists.linux-foundation.org S: Maintained @@ -1932,7 +1929,7 @@ S: Maintained F: tools/power/cpupower CPUSETS -M: Paul Menage <menage@google.com> +M: Paul Menage <paul@paulmenage.org> W: http://www.bullopensource.org/cpuset/ W: http://oss.sgi.com/projects/cpusets/ S: Supported @@ -2649,11 +2646,11 @@ F: drivers/net/wan/dlci.c F: drivers/net/wan/sdla.c FRAMEBUFFER LAYER -M: Paul Mundt <lethal@linux-sh.org> +M: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> L: linux-fbdev@vger.kernel.org W: http://linux-fbdev.sourceforge.net/ Q: http://patchwork.kernel.org/project/linux-fbdev/list/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6.git +T: git git://github.com/schandinat/linux-2.6.git fbdev-next S: Maintained F: Documentation/fb/ F: Documentation/devicetree/bindings/fb/ @@ -3262,6 +3259,17 @@ F: Documentation/input/multi-touch-protocol.txt F: drivers/input/input-mt.c K: \b(ABS|SYN)_MT_ +INTEL C600 SERIES SAS CONTROLLER DRIVER +M: Intel SCU Linux support <intel-linux-scu@intel.com> +M: Dan Williams <dan.j.williams@intel.com> +M: Dave Jiang <dave.jiang@intel.com> +M: Ed Nadolski <edmund.nadolski@intel.com> +L: linux-scsi@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/djbw/isci.git +S: Maintained +F: drivers/scsi/isci/ +F: firmware/isci/ + INTEL IDLE DRIVER M: Len Brown <lenb@kernel.org> L: linux-pm@lists.linux-foundation.org @@ -4404,7 +4412,8 @@ L: netfilter@vger.kernel.org L: coreteam@netfilter.org W: http://www.netfilter.org/ W: http://www.iptables.org/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next-2.6.git S: Supported F: include/linux/netfilter* F: include/linux/netfilter/ @@ -4450,8 +4459,8 @@ M: "David S. Miller" <davem@davemloft.net> L: netdev@vger.kernel.org W: http://www.linuxfoundation.org/en/Net W: http://patchwork.ozlabs.org/project/netdev/list/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git -T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git S: Maintained F: net/ F: include/net/ @@ -4774,7 +4783,7 @@ F: drivers/net/wireless/orinoco/ OSD LIBRARY and FILESYSTEM M: Boaz Harrosh <bharrosh@panasas.com> -M: Benny Halevy <bhalevy@panasas.com> +M: Benny Halevy <bhalevy@tonian.com> L: osd-dev@open-osd.org W: http://open-osd.org T: git git://git.open-osd.org/open-osd.git @@ -5532,6 +5541,7 @@ F: include/media/*7146* SAMSUNG AUDIO (ASoC) DRIVERS M: Jassi Brar <jassisinghbrar@gmail.com> +M: Sangbeom Kim <sbkim73@samsung.com> L: alsa-devel@alsa-project.org (moderated for non-subscribers) S: Supported F: sound/soc/samsung @@ -7087,7 +7097,7 @@ S: Supported F: drivers/mmc/host/vub300.c W1 DALLAS'S 1-WIRE BUS -M: Evgeniy Polyakov <johnpol@2ka.mipt.ru> +M: Evgeniy Polyakov <zbr@ioremap.net> S: Maintained F: Documentation/w1/ F: drivers/w1/ @@ -7199,6 +7209,9 @@ W: http://opensource.wolfsonmicro.com/content/linux-drivers-wolfson-devices S: Supported F: Documentation/hwmon/wm83?? F: drivers/leds/leds-wm83*.c +F: drivers/input/misc/wm831x-on.c +F: drivers/input/touchscreen/wm831x-ts.c +F: drivers/input/touchscreen/wm97*.c F: drivers/mfd/wm8*.c F: drivers/power/wm83*.c F: drivers/rtc/rtc-wm83*.c @@ -7208,6 +7221,7 @@ F: drivers/watchdog/wm83*_wdt.c F: include/linux/mfd/wm831x/ F: include/linux/mfd/wm8350/ F: include/linux/mfd/wm8400* +F: include/linux/wm97xx.h F: include/sound/wm????.h F: sound/soc/codecs/wm* @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 1 SUBLEVEL = 0 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc8 NAME = "Divemaster Edition" # *DOCUMENTATION* diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 60cde53d266..8bb936226de 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -51,7 +51,7 @@ config GENERIC_CMOS_UPDATE def_bool y config GENERIC_GPIO - def_bool y + bool config ZONE_DMA bool diff --git a/arch/alpha/include/asm/sysinfo.h b/arch/alpha/include/asm/sysinfo.h index 086aba284df..e77d77cd07b 100644 --- a/arch/alpha/include/asm/sysinfo.h +++ b/arch/alpha/include/asm/sysinfo.h @@ -27,13 +27,4 @@ #define UAC_NOFIX 2 #define UAC_SIGBUS 4 - -#ifdef __KERNEL__ - -/* This is the shift that is applied to the UAC bits as stored in the - per-thread flags. See thread_info.h. */ -#define UAC_SHIFT 6 - -#endif - #endif /* __ASM_ALPHA_SYSINFO_H */ diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h index 6f32f9c84a2..ff73db02234 100644 --- a/arch/alpha/include/asm/thread_info.h +++ b/arch/alpha/include/asm/thread_info.h @@ -74,9 +74,9 @@ register struct thread_info *__current_thread_info __asm__("$8"); #define TIF_NEED_RESCHED 3 /* rescheduling necessary */ #define TIF_POLLING_NRFLAG 8 /* poll_idle is polling NEED_RESCHED */ #define TIF_DIE_IF_KERNEL 9 /* dik recursion lock */ -#define TIF_UAC_NOPRINT 10 /* see sysinfo.h */ -#define TIF_UAC_NOFIX 11 -#define TIF_UAC_SIGBUS 12 +#define TIF_UAC_NOPRINT 10 /* ! Preserve sequence of following */ +#define TIF_UAC_NOFIX 11 /* ! flags as they match */ +#define TIF_UAC_SIGBUS 12 /* ! userspace part of 'osf_sysinfo' */ #define TIF_MEMDIE 13 /* is terminating due to OOM killer */ #define TIF_RESTORE_SIGMASK 14 /* restore signal mask in do_signal */ #define TIF_FREEZE 16 /* is freezing for suspend */ @@ -97,7 +97,7 @@ register struct thread_info *__current_thread_info __asm__("$8"); #define _TIF_ALLWORK_MASK (_TIF_WORK_MASK \ | _TIF_SYSCALL_TRACE) -#define ALPHA_UAC_SHIFT 10 +#define ALPHA_UAC_SHIFT TIF_UAC_NOPRINT #define ALPHA_UAC_MASK (1 << TIF_UAC_NOPRINT | 1 << TIF_UAC_NOFIX | \ 1 << TIF_UAC_SIGBUS) diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 326f0a2d56e..01e8715e26d 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -42,6 +42,7 @@ #include <asm/uaccess.h> #include <asm/system.h> #include <asm/sysinfo.h> +#include <asm/thread_info.h> #include <asm/hwrpb.h> #include <asm/processor.h> @@ -633,9 +634,10 @@ SYSCALL_DEFINE5(osf_getsysinfo, unsigned long, op, void __user *, buffer, case GSI_UACPROC: if (nbytes < sizeof(unsigned int)) return -EINVAL; - w = (current_thread_info()->flags >> UAC_SHIFT) & UAC_BITMASK; - if (put_user(w, (unsigned int __user *)buffer)) - return -EFAULT; + w = (current_thread_info()->flags >> ALPHA_UAC_SHIFT) & + UAC_BITMASK; + if (put_user(w, (unsigned int __user *)buffer)) + return -EFAULT; return 1; case GSI_PROC_TYPE: @@ -756,8 +758,8 @@ SYSCALL_DEFINE5(osf_setsysinfo, unsigned long, op, void __user *, buffer, case SSIN_UACPROC: again: old = current_thread_info()->flags; - new = old & ~(UAC_BITMASK << UAC_SHIFT); - new = new | (w & UAC_BITMASK) << UAC_SHIFT; + new = old & ~(UAC_BITMASK << ALPHA_UAC_SHIFT); + new = new | (w & UAC_BITMASK) << ALPHA_UAC_SHIFT; if (cmpxchg(¤t_thread_info()->flags, old, new) != old) goto again; diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S index b9c28f3f195..6acea1f96de 100644 --- a/arch/alpha/kernel/systbls.S +++ b/arch/alpha/kernel/systbls.S @@ -360,7 +360,7 @@ sys_call_table: .quad sys_newuname .quad sys_nanosleep /* 340 */ .quad sys_mremap - .quad sys_nfsservctl + .quad sys_ni_syscall /* old nfsservctl */ .quad sys_setresuid .quad sys_getresuid .quad sys_pciconfig_read /* 345 */ diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index b7f7510658d..70b3943a575 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -746,9 +746,6 @@ config ARCH_S3C64XX select SAMSUNG_IRQ_VIC_TIMER select SAMSUNG_IRQ_UART select S3C_GPIO_TRACK - select S3C_GPIO_PULL_UPDOWN - select S3C_GPIO_CFG_S3C24XX - select S3C_GPIO_CFG_S3C64XX select S3C_DEV_NAND select USB_ARCH_HAS_OHCI select SAMSUNG_GPIOLIB_4BIT @@ -1297,6 +1294,32 @@ config ARM_ERRATA_754327 This workaround defines cpu_relax() as smp_mb(), preventing correctly written polling loops from denying visibility of updates to memory. +config ARM_ERRATA_364296 + bool "ARM errata: Possible cache data corruption with hit-under-miss enabled" + depends on CPU_V6 && !SMP + help + This options enables the workaround for the 364296 ARM1136 + r0p2 erratum (possible cache data corruption with + hit-under-miss enabled). It sets the undocumented bit 31 in + the auxiliary control register and the FI bit in the control + register, thus disabling hit-under-miss without putting the + processor into full low interrupt latency mode. ARM11MPCore + is not affected. + +config ARM_ERRATA_764369 + bool "ARM errata: Data cache line maintenance operation by MVA may not succeed" + depends on CPU_V7 && SMP + help + This option enables the workaround for erratum 764369 + affecting Cortex-A9 MPCore with two or more processors (all + current revisions). Under certain timing circumstances, a data + cache line maintenance operation by MVA targeting an Inner + Shareable memory region may fail to proceed up to either the + Point of Coherency or to the Point of Unification of the + system. This workaround adds a DSB instruction before the + relevant cache maintenance functions and sets a specific bit + in the diagnostic control register of the SCU. + endmenu source "arch/arm/common/Kconfig" @@ -2096,7 +2119,7 @@ menu "Power management options" source "kernel/power/Kconfig" config ARCH_SUSPEND_POSSIBLE - depends on !ARCH_S5P64X0 && !ARCH_S5PC100 + depends on !ARCH_S5PC100 depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \ CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE def_bool y diff --git a/arch/arm/boot/compressed/mmcif-sh7372.c b/arch/arm/boot/compressed/mmcif-sh7372.c index b6f61d9a5a1..672ae95db5c 100644 --- a/arch/arm/boot/compressed/mmcif-sh7372.c +++ b/arch/arm/boot/compressed/mmcif-sh7372.c @@ -82,7 +82,7 @@ asmlinkage void mmc_loader(unsigned char *buf, unsigned long len) /* Disable clock to MMC hardware block */ - __raw_writel(__raw_readl(SMSTPCR3) & (1 << 12), SMSTPCR3); + __raw_writel(__raw_readl(SMSTPCR3) | (1 << 12), SMSTPCR3); mmc_update_progress(MMC_PROGRESS_DONE); } diff --git a/arch/arm/boot/compressed/sdhi-sh7372.c b/arch/arm/boot/compressed/sdhi-sh7372.c index d403a8b24d7..d279294f238 100644 --- a/arch/arm/boot/compressed/sdhi-sh7372.c +++ b/arch/arm/boot/compressed/sdhi-sh7372.c @@ -85,7 +85,7 @@ asmlinkage void mmc_loader(unsigned short *buf, unsigned long len) goto err; /* Disable clock to SDHI1 hardware block */ - __raw_writel(__raw_readl(SMSTPCR3) & (1 << 13), SMSTPCR3); + __raw_writel(__raw_readl(SMSTPCR3) | (1 << 13), SMSTPCR3); mmc_update_progress(MMC_PROGRESS_DONE); diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts new file mode 100644 index 00000000000..9486be62bcd --- /dev/null +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap3.dtsi" + +/ { + model = "TI OMAP3 BeagleBoard"; + compatible = "ti,omap3-beagle", "ti,omap3"; + + /* + * Since the initial device tree board file does not create any + * devices (MMC, network...), the only way to boot is to provide a + * ramdisk. + */ + chosen { + bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi new file mode 100644 index 00000000000..d202bb5ec7e --- /dev/null +++ b/arch/arm/boot/dts/omap3.dtsi @@ -0,0 +1,63 @@ +/* + * Device Tree Source for OMAP3 SoC + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "ti,omap3430", "ti,omap3"; + + cpus { + cpu@0 { + compatible = "arm,cortex-a8"; + }; + }; + + /* + * The soc node represents the soc top level view. It is uses for IPs + * that are not memory mapped in the MPU view or for the MPU itself. + */ + soc { + compatible = "ti,omap-infra"; + mpu { + compatible = "ti,omap3-mpu"; + ti,hwmods = "mpu"; + }; + + iva { + compatible = "ti,iva2.2"; + ti,hwmods = "iva"; + + dsp { + compatible = "ti,omap3-c64"; + }; + }; + }; + + /* + * XXX: Use a flat representation of the OMAP3 interconnect. + * The real OMAP interconnect network is quite complex. + * Since that will not bring real advantage to represent that in DT for + * the moment, just use a fake OCP bus entry to represent the whole bus + * hierarchy. + */ + ocp { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "l3_main"; + + intc: interrupt-controller@1 { + compatible = "ti,omap3-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts new file mode 100644 index 00000000000..c7026578ce7 --- /dev/null +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap4.dtsi" + +/ { + model = "TI OMAP4 PandaBoard"; + compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4"; + + /* + * Since the initial device tree board file does not create any + * devices (MMC, network...), the only way to boot is to provide a + * ramdisk. + */ + chosen { + bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug"; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; +}; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts new file mode 100644 index 00000000000..066e28c9032 --- /dev/null +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap4.dtsi" + +/ { + model = "TI OMAP4 SDP board"; + compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4"; + + /* + * Since the initial device tree board file does not create any + * devices (MMC, network...), the only way to boot is to provide a + * ramdisk. + */ + chosen { + bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug"; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; +}; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi new file mode 100644 index 00000000000..4c61c829043 --- /dev/null +++ b/arch/arm/boot/dts/omap4.dtsi @@ -0,0 +1,103 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Carveout for multimedia usecases + * It should be the last 48MB of the first 512MB memory part + * In theory, it should not even exist. That zone should be reserved + * dynamically during the .reserve callback. + */ +/memreserve/ 0x9d000000 0x03000000; + +/include/ "skeleton.dtsi" + +/ { + compatible = "ti,omap4430", "ti,omap4"; + interrupt-parent = <&gic>; + + aliases { + }; + + cpus { + cpu@0 { + compatible = "arm,cortex-a9"; + }; + cpu@1 { + compatible = "arm,cortex-a9"; + }; + }; + + /* + * The soc node represents the soc top level view. It is uses for IPs + * that are not memory mapped in the MPU view or for the MPU itself. + */ + soc { + compatible = "ti,omap-infra"; + mpu { + compatible = "ti,omap4-mpu"; + ti,hwmods = "mpu"; + }; + + dsp { + compatible = "ti,omap3-c64"; + ti,hwmods = "dsp"; + }; + + iva { + compatible = "ti,ivahd"; + ti,hwmods = "iva"; + }; + }; + + /* + * XXX: Use a flat representation of the OMAP4 interconnect. + * The real OMAP interconnect network is quite complex. + * + * MPU -+-- MPU_PRIVATE - GIC, L2 + * | + * +----------------+----------+ + * | | | + * + +- EMIF - DDR | + * | | | + * | + +--------+ + * | | | + * | +- L4_ABE - AESS, MCBSP, TIMERs... + * | | + * +- L3_MAIN --+- L4_CORE - IPs... + * | + * +- L4_PER - IPs... + * | + * +- L4_CFG -+- L4_WKUP - IPs... + * | | + * | +- IPs... + * +- IPU ----+ + * | | + * +- DSP ----+ + * | | + * +- DSS ----+ + * + * Since that will not bring real advantage to represent that in DT for + * the moment, just use a fake OCP bus entry to represent the whole bus + * hierarchy. + */ + ocp { + compatible = "ti,omap4-l3-noc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; + + gic: interrupt-controller@48241000 { + compatible = "arm,cortex-a9-gic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x48241000 0x1000>, + <0x48240100 0x0100>; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts index 4c053340ce3..e5818668d09 100644 --- a/arch/arm/boot/dts/tegra-harmony.dts +++ b/arch/arm/boot/dts/tegra-harmony.dts @@ -57,14 +57,14 @@ }; sdhci@c8000200 { - gpios = <&gpio 69 0>, /* cd, gpio PI5 */ - <&gpio 57 0>, /* wp, gpio PH1 */ - <&gpio 155 0>; /* power, gpio PT3 */ + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 155 0>; /* gpio PT3 */ }; sdhci@c8000600 { - gpios = <&gpio 58 0>, /* cd, gpio PH2 */ - <&gpio 59 0>, /* wp, gpio PH3 */ - <&gpio 70 0>; /* power, gpio PI6 */ + cd-gpios = <&gpio 58 0>; /* gpio PH2 */ + wp-gpios = <&gpio 59 0>; /* gpio PH3 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ }; }; diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts index 1940cae0074..64cedca6fc7 100644 --- a/arch/arm/boot/dts/tegra-seaboard.dts +++ b/arch/arm/boot/dts/tegra-seaboard.dts @@ -21,8 +21,8 @@ }; sdhci@c8000400 { - gpios = <&gpio 69 0>, /* cd, gpio PI5 */ - <&gpio 57 0>, /* wp, gpio PH1 */ - <&gpio 70 0>; /* power, gpio PI6 */ + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ }; }; diff --git a/arch/arm/configs/exynos4_defconfig b/arch/arm/configs/exynos4_defconfig index da53ff3b4d7..cd40bb56e56 100644 --- a/arch/arm/configs/exynos4_defconfig +++ b/arch/arm/configs/exynos4_defconfig @@ -11,6 +11,7 @@ CONFIG_MACH_SMDKV310=y CONFIG_MACH_ARMLEX4210=y CONFIG_MACH_UNIVERSAL_C210=y CONFIG_MACH_NURI=y +CONFIG_MACH_ORIGEN=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y diff --git a/arch/arm/include/asm/device.h b/arch/arm/include/asm/device.h index 9f390ce335c..b5c9f5b1f6a 100644 --- a/arch/arm/include/asm/device.h +++ b/arch/arm/include/asm/device.h @@ -12,7 +12,12 @@ struct dev_archdata { #endif }; +struct omap_device; + struct pdev_archdata { +#ifdef CONFIG_ARCH_OMAP + struct omap_device *od; +#endif }; #endif diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h index 8c73900da9e..253cc86318b 100644 --- a/arch/arm/include/asm/futex.h +++ b/arch/arm/include/asm/futex.h @@ -25,17 +25,17 @@ #ifdef CONFIG_SMP -#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ +#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \ smp_mb(); \ __asm__ __volatile__( \ - "1: ldrex %1, [%2]\n" \ + "1: ldrex %1, [%3]\n" \ " " insn "\n" \ - "2: strex %1, %0, [%2]\n" \ - " teq %1, #0\n" \ + "2: strex %2, %0, [%3]\n" \ + " teq %2, #0\n" \ " bne 1b\n" \ " mov %0, #0\n" \ - __futex_atomic_ex_table("%4") \ - : "=&r" (ret), "=&r" (oldval) \ + __futex_atomic_ex_table("%5") \ + : "=&r" (ret), "=&r" (oldval), "=&r" (tmp) \ : "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \ : "cc", "memory") @@ -73,14 +73,14 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, #include <linux/preempt.h> #include <asm/domain.h> -#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ +#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \ __asm__ __volatile__( \ - "1: " T(ldr) " %1, [%2]\n" \ + "1: " T(ldr) " %1, [%3]\n" \ " " insn "\n" \ - "2: " T(str) " %0, [%2]\n" \ + "2: " T(str) " %0, [%3]\n" \ " mov %0, #0\n" \ - __futex_atomic_ex_table("%4") \ - : "=&r" (ret), "=&r" (oldval) \ + __futex_atomic_ex_table("%5") \ + : "=&r" (ret), "=&r" (oldval), "=&r" (tmp) \ : "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \ : "cc", "memory") @@ -117,7 +117,7 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr) int cmp = (encoded_op >> 24) & 15; int oparg = (encoded_op << 8) >> 20; int cmparg = (encoded_op << 20) >> 20; - int oldval = 0, ret; + int oldval = 0, ret, tmp; if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) oparg = 1 << oparg; @@ -129,19 +129,19 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr) switch (op) { case FUTEX_OP_SET: - __futex_atomic_op("mov %0, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("mov %0, %4", ret, oldval, tmp, uaddr, oparg); break; case FUTEX_OP_ADD: - __futex_atomic_op("add %0, %1, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("add %0, %1, %4", ret, oldval, tmp, uaddr, oparg); break; case FUTEX_OP_OR: - __futex_atomic_op("orr %0, %1, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("orr %0, %1, %4", ret, oldval, tmp, uaddr, oparg); break; case FUTEX_OP_ANDN: - __futex_atomic_op("and %0, %1, %3", ret, oldval, uaddr, ~oparg); + __futex_atomic_op("and %0, %1, %4", ret, oldval, tmp, uaddr, ~oparg); break; case FUTEX_OP_XOR: - __futex_atomic_op("eor %0, %1, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("eor %0, %1, %4", ret, oldval, tmp, uaddr, oparg); break; default: ret = -ENOSYS; diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index 16bd4803158..99a6ed7e1bf 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -45,8 +45,13 @@ #define L2X0_CLEAN_INV_LINE_PA 0x7F0 #define L2X0_CLEAN_INV_LINE_IDX 0x7F8 #define L2X0_CLEAN_INV_WAY 0x7FC -#define L2X0_LOCKDOWN_WAY_D 0x900 -#define L2X0_LOCKDOWN_WAY_I 0x904 +/* + * The lockdown registers repeat 8 times for L310, the L210 has only one + * D and one I lockdown register at 0x0900 and 0x0904. + */ +#define L2X0_LOCKDOWN_WAY_D_BASE 0x900 +#define L2X0_LOCKDOWN_WAY_I_BASE 0x904 +#define L2X0_LOCKDOWN_STRIDE 0x08 #define L2X0_TEST_OPERATION 0xF00 #define L2X0_LINE_DATA 0xF10 #define L2X0_LINE_TAG 0xF30 @@ -64,7 +69,7 @@ #define L2X0_AUX_CTRL_MASK 0xc0000fff #define L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT 16 #define L2X0_AUX_CTRL_WAY_SIZE_SHIFT 17 -#define L2X0_AUX_CTRL_WAY_SIZE_MASK (0x3 << 17) +#define L2X0_AUX_CTRL_WAY_SIZE_MASK (0x7 << 17) #define L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT 22 #define L2X0_AUX_CTRL_NS_LOCKDOWN_SHIFT 26 #define L2X0_AUX_CTRL_NS_INT_CTRL_SHIFT 27 diff --git a/arch/arm/include/asm/hardware/pl080.h b/arch/arm/include/asm/hardware/pl080.h index e4a04e4e562..33c78d7af2e 100644 --- a/arch/arm/include/asm/hardware/pl080.h +++ b/arch/arm/include/asm/hardware/pl080.h @@ -21,6 +21,9 @@ * OneNAND features. */ +#ifndef ASM_PL080_H +#define ASM_PL080_H + #define PL080_INT_STATUS (0x00) #define PL080_TC_STATUS (0x04) #define PL080_TC_CLEAR (0x08) @@ -138,3 +141,4 @@ struct pl080s_lli { u32 control1; }; +#endif /* ASM_PL080_H */ diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index 67c70a31a1b..b7e82c4aced 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -41,7 +41,7 @@ struct arm_pmu_platdata { * encoded error on failure. */ extern struct platform_device * -reserve_pmu(enum arm_pmu_type device); +reserve_pmu(enum arm_pmu_type type); /** * release_pmu() - Relinquish control of the performance counters @@ -62,26 +62,26 @@ release_pmu(enum arm_pmu_type type); * the actual hardware initialisation. */ extern int -init_pmu(enum arm_pmu_type device); +init_pmu(enum arm_pmu_type type); #else /* CONFIG_CPU_HAS_PMU */ #include <linux/err.h> static inline struct platform_device * -reserve_pmu(enum arm_pmu_type device) +reserve_pmu(enum arm_pmu_type type) { return ERR_PTR(-ENODEV); } static inline int -release_pmu(struct platform_device *pdev) +release_pmu(enum arm_pmu_type type) { return -ENODEV; } static inline int -init_pmu(enum arm_pmu_type device) +init_pmu(enum arm_pmu_type type) { return -ENODEV; } diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 2c04ed5efeb..c60a2944f95 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -478,8 +478,8 @@ /* * Unimplemented (or alternatively implemented) syscalls */ -#define __IGNORE_fadvise64_64 1 -#define __IGNORE_migrate_pages 1 +#define __IGNORE_fadvise64_64 +#define __IGNORE_migrate_pages #endif /* __KERNEL__ */ #endif /* __ASM_ARM_UNISTD_H */ diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 80f7896cc01..9943e9e74a1 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -178,7 +178,7 @@ CALL(sys_ni_syscall) /* vm86 */ CALL(sys_ni_syscall) /* was sys_query_module */ CALL(sys_poll) - CALL(sys_nfsservctl) + CALL(sys_ni_syscall) /* was nfsservctl */ /* 170 */ CALL(sys_setresgid16) CALL(sys_getresgid16) CALL(sys_prctl) diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c index 2b70709376c..c53474fe84d 100644 --- a/arch/arm/kernel/pmu.c +++ b/arch/arm/kernel/pmu.c @@ -31,7 +31,7 @@ static int __devinit pmu_register(struct platform_device *pdev, { if (type < 0 || type >= ARM_NUM_PMU_DEVICES) { pr_warning("received registration request for unknown " - "device %d\n", type); + "PMU device type %d\n", type); return -EINVAL; } @@ -112,17 +112,17 @@ static int __init register_pmu_driver(void) device_initcall(register_pmu_driver); struct platform_device * -reserve_pmu(enum arm_pmu_type device) +reserve_pmu(enum arm_pmu_type type) { struct platform_device *pdev; - if (test_and_set_bit_lock(device, &pmu_lock)) { + if (test_and_set_bit_lock(type, &pmu_lock)) { pdev = ERR_PTR(-EBUSY); - } else if (pmu_devices[device] == NULL) { - clear_bit_unlock(device, &pmu_lock); + } else if (pmu_devices[type] == NULL) { + clear_bit_unlock(type, &pmu_lock); pdev = ERR_PTR(-ENODEV); } else { - pdev = pmu_devices[device]; + pdev = pmu_devices[type]; } return pdev; @@ -130,11 +130,11 @@ reserve_pmu(enum arm_pmu_type device) EXPORT_SYMBOL_GPL(reserve_pmu); int -release_pmu(enum arm_pmu_type device) +release_pmu(enum arm_pmu_type type) { - if (WARN_ON(!pmu_devices[device])) + if (WARN_ON(!pmu_devices[type])) return -EINVAL; - clear_bit_unlock(device, &pmu_lock); + clear_bit_unlock(type, &pmu_lock); return 0; } EXPORT_SYMBOL_GPL(release_pmu); @@ -182,17 +182,17 @@ init_cpu_pmu(void) } int -init_pmu(enum arm_pmu_type device) +init_pmu(enum arm_pmu_type type) { int err = 0; - switch (device) { + switch (type) { case ARM_PMU_DEVICE_CPU: err = init_cpu_pmu(); break; default: - pr_warning("attempt to initialise unknown device %d\n", - device); + pr_warning("attempt to initialise PMU of unknown " + "type %d\n", type); err = -EINVAL; } diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S index 9cf4cbf8f95..d0cdedf4864 100644 --- a/arch/arm/kernel/relocate_kernel.S +++ b/arch/arm/kernel/relocate_kernel.S @@ -57,7 +57,8 @@ relocate_new_kernel: mov r0,#0 ldr r1,kexec_mach_type ldr r2,kexec_boot_atags - mov pc,lr + ARM( mov pc, lr ) + THUMB( bx lr ) .align diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 78d197d6ec3..6136144f8f8 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -280,18 +280,19 @@ static void __init cacheid_init(void) if (arch >= CPU_ARCH_ARMv6) { if ((cachetype & (7 << 29)) == 4 << 29) { /* ARMv7 register format */ + arch = CPU_ARCH_ARMv7; cacheid = CACHEID_VIPT_NONALIASING; if ((cachetype & (3 << 14)) == 1 << 14) cacheid |= CACHEID_ASID_TAGGED; - else if (cpu_has_aliasing_icache(CPU_ARCH_ARMv7)) - cacheid |= CACHEID_VIPT_I_ALIASING; - } else if (cachetype & (1 << 23)) { - cacheid = CACHEID_VIPT_ALIASING; } else { - cacheid = CACHEID_VIPT_NONALIASING; - if (cpu_has_aliasing_icache(CPU_ARCH_ARMv6)) - cacheid |= CACHEID_VIPT_I_ALIASING; + arch = CPU_ARCH_ARMv6; + if (cachetype & (1 << 23)) + cacheid = CACHEID_VIPT_ALIASING; + else + cacheid = CACHEID_VIPT_NONALIASING; } + if (cpu_has_aliasing_icache(arch)) + cacheid |= CACHEID_VIPT_I_ALIASING; } else { cacheid = CACHEID_VIVT; } diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c index 79ed5e7f204..7fcddb75c87 100644 --- a/arch/arm/kernel/smp_scu.c +++ b/arch/arm/kernel/smp_scu.c @@ -13,6 +13,7 @@ #include <asm/smp_scu.h> #include <asm/cacheflush.h> +#include <asm/cputype.h> #define SCU_CTRL 0x00 #define SCU_CONFIG 0x04 @@ -37,6 +38,15 @@ void __init scu_enable(void __iomem *scu_base) { u32 scu_ctrl; +#ifdef CONFIG_ARM_ERRATA_764369 + /* Cortex-A9 only */ + if ((read_cpuid(CPUID_ID) & 0xff0ffff0) == 0x410fc090) { + scu_ctrl = __raw_readl(scu_base + 0x30); + if (!(scu_ctrl & 1)) + __raw_writel(scu_ctrl | 0x1, scu_base + 0x30); + } +#endif + scu_ctrl = __raw_readl(scu_base + SCU_CTRL); /* already enabled? */ if (scu_ctrl & 1) diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 2c277d40cee..01c186222f3 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -137,8 +137,8 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk) clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk); clk->min_delta_ns = clockevent_delta2ns(0xf, clk); + clockevents_register_device(clk); + /* Make sure our local interrupt controller has this enabled */ gic_enable_ppi(clk->irq); - - clockevents_register_device(clk); } diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index bf977f8514f..4e66f62b8d4 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -23,8 +23,10 @@ #if defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK) #define ARM_EXIT_KEEP(x) x +#define ARM_EXIT_DISCARD(x) #else #define ARM_EXIT_KEEP(x) +#define ARM_EXIT_DISCARD(x) x #endif OUTPUT_ARCH(arm) @@ -39,6 +41,11 @@ jiffies = jiffies_64 + 4; SECTIONS { /* + * XXX: The linker does not define how output sections are + * assigned to input sections when there are multiple statements + * matching the same input section name. There is no documented + * order of matching. + * * unwind exit sections must be discarded before the rest of the * unwind sections get included. */ @@ -47,6 +54,9 @@ SECTIONS *(.ARM.extab.exit.text) ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text)) ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text)) + ARM_EXIT_DISCARD(EXIT_TEXT) + ARM_EXIT_DISCARD(EXIT_DATA) + EXIT_CALL #ifndef CONFIG_HOTPLUG *(.ARM.exidx.devexit.text) *(.ARM.extab.devexit.text) @@ -58,6 +68,8 @@ SECTIONS #ifndef CONFIG_SMP_ON_UP *(.alt.smp.init) #endif + *(.discard) + *(.discard.*) } #ifdef CONFIG_XIP_KERNEL @@ -279,9 +291,6 @@ SECTIONS STABS_DEBUG .comment 0 : { *(.comment) } - - /* Default discards */ - DISCARDS } /* diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index d522b47e30b..6c8e3b5f669 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -157,7 +157,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), - CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), diff --git a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S index 6bd83ed90af..d87bfc397d3 100644 --- a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S +++ b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S @@ -8,7 +8,6 @@ * published by the Free Software Foundation. */ -#include <mach/hardware.h> #include <asm/hardware/entry-macro-gic.S> .macro disable_fiq diff --git a/arch/arm/mach-cns3xxx/include/mach/system.h b/arch/arm/mach-cns3xxx/include/mach/system.h index 58bb03ae3cf..4f16c9b79f7 100644 --- a/arch/arm/mach-cns3xxx/include/mach/system.h +++ b/arch/arm/mach-cns3xxx/include/mach/system.h @@ -13,7 +13,6 @@ #include <linux/io.h> #include <asm/proc-fns.h> -#include <mach/hardware.h> static inline void arch_idle(void) { diff --git a/arch/arm/mach-cns3xxx/include/mach/uncompress.h b/arch/arm/mach-cns3xxx/include/mach/uncompress.h index de8ead9b91f..a91b6058ab4 100644 --- a/arch/arm/mach-cns3xxx/include/mach/uncompress.h +++ b/arch/arm/mach-cns3xxx/include/mach/uncompress.h @@ -8,7 +8,6 @@ */ #include <asm/mach-types.h> -#include <mach/hardware.h> #include <mach/cns3xxx.h> #define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00)) diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c index 06fd25d70ae..0f8fca48a5e 100644 --- a/arch/arm/mach-cns3xxx/pcie.c +++ b/arch/arm/mach-cns3xxx/pcie.c @@ -49,7 +49,7 @@ static struct cns3xxx_pcie *sysdata_to_cnspci(void *sysdata) return &cns3xxx_pcie[root->domain]; } -static struct cns3xxx_pcie *pdev_to_cnspci(struct pci_dev *dev) +static struct cns3xxx_pcie *pdev_to_cnspci(const struct pci_dev *dev) { return sysdata_to_cnspci(dev->sysdata); } diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 85a2c7e1e68..6e41cb5baeb 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -115,6 +115,32 @@ static struct spi_board_info da850evm_spi_info[] = { }, }; +#ifdef CONFIG_MTD +static void da850_evm_m25p80_notify_add(struct mtd_info *mtd) +{ + char *mac_addr = davinci_soc_info.emac_pdata->mac_addr; + size_t retlen; + + if (!strcmp(mtd->name, "MAC-Address")) { + mtd->read(mtd, 0, ETH_ALEN, &retlen, mac_addr); + if (retlen == ETH_ALEN) + pr_info("Read MAC addr from SPI Flash: %pM\n", + mac_addr); + } +} + +static struct mtd_notifier da850evm_spi_notifier = { + .add = da850_evm_m25p80_notify_add, +}; + +static void da850_evm_setup_mac_addr(void) +{ + register_mtd_user(&da850evm_spi_notifier); +} +#else +static void da850_evm_setup_mac_addr(void) { } +#endif + static struct mtd_partition da850_evm_norflash_partition[] = { { .name = "bootloaders + env", @@ -1244,6 +1270,8 @@ static __init void da850_evm_init(void) if (ret) pr_warning("da850_evm_init: sata registration failed: %d\n", ret); + + da850_evm_setup_mac_addr(); } #ifdef CONFIG_SERIAL_8250_CONSOLE diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index 47fd0bc3d3e..fa59c097223 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -243,7 +243,7 @@ #define PSC_STATE_DISABLE 2 #define PSC_STATE_ENABLE 3 -#define MDSTAT_STATE_MASK 0x1f +#define MDSTAT_STATE_MASK 0x3f #define MDCTL_FORCE BIT(31) #ifndef __ASSEMBLER__ diff --git a/arch/arm/mach-davinci/sleep.S b/arch/arm/mach-davinci/sleep.S index 57402899554..d4e9316ecac 100644 --- a/arch/arm/mach-davinci/sleep.S +++ b/arch/arm/mach-davinci/sleep.S @@ -217,7 +217,11 @@ ddr2clk_stop_done: ENDPROC(davinci_ddr_psc_config) CACHE_FLUSH: - .word arm926_flush_kern_cache_all +#ifdef CONFIG_CPU_V6 + .word v6_flush_kern_cache_all +#else + .word arm926_flush_kern_cache_all +#endif ENTRY(davinci_cpu_suspend_sz) .word . - davinci_cpu_suspend diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 83dce859886..a9e0dae86a2 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -158,7 +158,7 @@ void __init dove_spi0_init(void) void __init dove_spi1_init(void) { - orion_spi_init(DOVE_SPI1_PHYS_BASE, get_tclk()); + orion_spi_1_init(DOVE_SPI1_PHYS_BASE, get_tclk()); } /***************************************************************************** diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h index 0eabec62cd9..f1397a13e76 100644 --- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h +++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h @@ -6,7 +6,7 @@ * TS72xx memory map: * * virt phys size - * febff000 22000000 4K model number register + * febff000 22000000 4K model number register (bits 0-2) * febfe000 22400000 4K options register * febfd000 22800000 4K options register #2 * febf9000 10800000 4K TS-5620 RTC index register @@ -20,6 +20,9 @@ #define TS72XX_MODEL_TS7200 0x00 #define TS72XX_MODEL_TS7250 0x01 #define TS72XX_MODEL_TS7260 0x02 +#define TS72XX_MODEL_TS7300 0x03 +#define TS72XX_MODEL_TS7400 0x04 +#define TS72XX_MODEL_MASK 0x07 #define TS72XX_OPTIONS_PHYS_BASE 0x22400000 @@ -51,19 +54,34 @@ #ifndef __ASSEMBLY__ +static inline int ts72xx_model(void) +{ + return __raw_readb(TS72XX_MODEL_VIRT_BASE) & TS72XX_MODEL_MASK; +} + static inline int board_is_ts7200(void) { - return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7200; + return ts72xx_model() == TS72XX_MODEL_TS7200; } static inline int board_is_ts7250(void) { - return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7250; + return ts72xx_model() == TS72XX_MODEL_TS7250; } static inline int board_is_ts7260(void) { - return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7260; + return ts72xx_model() == TS72XX_MODEL_TS7260; +} + +static inline int board_is_ts7300(void) +{ + return ts72xx_model() == TS72XX_MODEL_TS7300; +} + +static inline int board_is_ts7400(void) +{ + return ts72xx_model() == TS72XX_MODEL_TS7400; } static inline int is_max197_installed(void) diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index 0c77ab99fa1..dd660eb2020 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -11,10 +11,24 @@ if ARCH_EXYNOS4 config CPU_EXYNOS4210 bool - select S3C_PL330_DMA + select SAMSUNG_DMADEV + select S5P_PM if PM + select S5P_SLEEP if PM help Enable EXYNOS4210 CPU support +config SOC_EXYNOS4212 + bool + select S5P_PM if PM + select S5P_SLEEP if PM + help + Enable EXYNOS4212 SoC support + +config SOC_EXYNOS4412 + bool + help + Enable EXYNOS4412 SoC support + config EXYNOS4_MCT bool default y @@ -111,24 +125,11 @@ config EXYNOS4_SETUP_USB_PHY menu "EXYNOS4 Machines" +comment "EXYNOS4210 Boards" + config MACH_SMDKC210 bool "SMDKC210" - select CPU_EXYNOS4210 - select S5P_DEV_FIMD0 - select S3C_DEV_RTC - select S3C_DEV_WDT - select S3C_DEV_I2C1 - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_HSMMC2 - select S3C_DEV_HSMMC3 - select SAMSUNG_DEV_PWM - select SAMSUNG_DEV_BACKLIGHT - select EXYNOS4_DEV_PD - select EXYNOS4_DEV_SYSMMU - select EXYNOS4_SETUP_FIMD0 - select EXYNOS4_SETUP_I2C1 - select EXYNOS4_SETUP_SDHCI + select MACH_SMDKV310 help Machine support for Samsung SMDKC210 @@ -139,6 +140,14 @@ config MACH_SMDKV310 select S3C_DEV_RTC select S3C_DEV_WDT select S3C_DEV_I2C1 + select S5P_DEV_FIMC0 + select S5P_DEV_FIMC1 + select S5P_DEV_FIMC2 + select S5P_DEV_FIMC3 + select S5P_DEV_I2C_HDMIPHY + select S5P_DEV_MFC + select S5P_DEV_TV + select S5P_DEV_USB_EHCI select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 @@ -153,6 +162,7 @@ config MACH_SMDKV310 select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_KEYPAD select EXYNOS4_SETUP_SDHCI + select EXYNOS4_SETUP_USB_PHY help Machine support for Samsung SMDKV310 @@ -178,19 +188,26 @@ config MACH_UNIVERSAL_C210 select S5P_DEV_FIMC1 select S5P_DEV_FIMC2 select S5P_DEV_FIMC3 + select S5P_DEV_CSIS0 + select S5P_DEV_FIMD0 select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 select S3C_DEV_I2C1 select S3C_DEV_I2C3 select S3C_DEV_I2C5 + select S5P_DEV_I2C_HDMIPHY select S5P_DEV_MFC select S5P_DEV_ONENAND + select S5P_DEV_TV select EXYNOS4_DEV_PD + select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C5 select EXYNOS4_SETUP_SDHCI + select EXYNOS4_SETUP_FIMC + select S5P_SETUP_MIPIPHY help Machine support for Samsung Mobile Universal S5PC210 Reference Board. @@ -199,6 +216,8 @@ config MACH_NURI bool "Mobile NURI Board" select CPU_EXYNOS4210 select S3C_DEV_WDT + select S3C_DEV_RTC + select S5P_DEV_FIMD0 select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 @@ -208,6 +227,7 @@ config MACH_NURI select S5P_DEV_MFC select S5P_DEV_USB_EHCI select EXYNOS4_DEV_PD + select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C5 @@ -218,6 +238,62 @@ config MACH_NURI help Machine support for Samsung Mobile NURI Board. +config MACH_ORIGEN + bool "ORIGEN" + select CPU_EXYNOS4210 + select S3C_DEV_RTC + select S3C_DEV_WDT + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC2 + select S5P_DEV_FIMC0 + select S5P_DEV_FIMC1 + select S5P_DEV_FIMC2 + select S5P_DEV_FIMC3 + select S5P_DEV_FIMD0 + select S5P_DEV_I2C_HDMIPHY + select S5P_DEV_TV + select S5P_DEV_USB_EHCI + select EXYNOS4_DEV_PD + select SAMSUNG_DEV_BACKLIGHT + select SAMSUNG_DEV_PWM + select EXYNOS4_SETUP_FIMD0 + select EXYNOS4_SETUP_SDHCI + select EXYNOS4_SETUP_USB_PHY + help + Machine support for ORIGEN based on Samsung EXYNOS4210 + +comment "EXYNOS4212 Boards" + +config MACH_SMDK4212 + bool "SMDK4212" + select SOC_EXYNOS4212 + select S3C_DEV_HSMMC2 + select S3C_DEV_HSMMC3 + select S3C_DEV_I2C1 + select S3C_DEV_I2C3 + select S3C_DEV_I2C7 + select S3C_DEV_RTC + select S3C_DEV_WDT + select SAMSUNG_DEV_BACKLIGHT + select SAMSUNG_DEV_KEYPAD + select SAMSUNG_DEV_PWM + select EXYNOS4_SETUP_I2C1 + select EXYNOS4_SETUP_I2C3 + select EXYNOS4_SETUP_I2C7 + select EXYNOS4_SETUP_KEYPAD + select EXYNOS4_SETUP_SDHCI + help + Machine support for Samsung SMDK4212 + +comment "EXYNOS4412 Boards" + +config MACH_SMDK4412 + bool "SMDK4412" + select SOC_EXYNOS4412 + select MACH_SMDK4212 + help + Machine support for Samsung SMDK4412 + endmenu comment "Configuration for HSMMC bus width" diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile index b7fe1d7b0b1..2bb18f431db 100644 --- a/arch/arm/mach-exynos4/Makefile +++ b/arch/arm/mach-exynos4/Makefile @@ -12,9 +12,11 @@ obj- := # Core support for EXYNOS4 system -obj-$(CONFIG_CPU_EXYNOS4210) += cpu.o init.o clock.o irq-combiner.o -obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o irq-eint.o dma.o pmu.o -obj-$(CONFIG_PM) += pm.o sleep.o +obj-$(CONFIG_ARCH_EXYNOS4) += cpu.o init.o clock.o irq-combiner.o +obj-$(CONFIG_ARCH_EXYNOS4) += setup-i2c0.o irq-eint.o dma.o pmu.o +obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o +obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o +obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o @@ -25,11 +27,15 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o # machine support -obj-$(CONFIG_MACH_SMDKC210) += mach-smdkc210.o +obj-$(CONFIG_MACH_SMDKC210) += mach-smdkv310.o obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o obj-$(CONFIG_MACH_ARMLEX4210) += mach-armlex4210.o obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o obj-$(CONFIG_MACH_NURI) += mach-nuri.o +obj-$(CONFIG_MACH_ORIGEN) += mach-origen.o + +obj-$(CONFIG_MACH_SMDK4212) += mach-smdk4x12.o +obj-$(CONFIG_MACH_SMDK4412) += mach-smdk4x12.o # device support diff --git a/arch/arm/mach-exynos4/clock-exynos4210.c b/arch/arm/mach-exynos4/clock-exynos4210.c new file mode 100644 index 00000000000..b9d5ef670eb --- /dev/null +++ b/arch/arm/mach-exynos4/clock-exynos4210.c @@ -0,0 +1,139 @@ +/* + * linux/arch/arm/mach-exynos4/clock-exynos4210.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4210 - Clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/syscore_ops.h> + +#include <plat/cpu-freq.h> +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/pll.h> +#include <plat/s5p-clock.h> +#include <plat/clock-clksrc.h> +#include <plat/exynos4.h> +#include <plat/pm.h> + +#include <mach/hardware.h> +#include <mach/map.h> +#include <mach/regs-clock.h> +#include <mach/exynos4-clock.h> + +static struct sleep_save exynos4210_clock_save[] = { + SAVE_ITEM(S5P_CLKSRC_IMAGE), + SAVE_ITEM(S5P_CLKSRC_LCD1), + SAVE_ITEM(S5P_CLKDIV_IMAGE), + SAVE_ITEM(S5P_CLKDIV_LCD1), + SAVE_ITEM(S5P_CLKSRC_MASK_LCD1), + SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4210), + SAVE_ITEM(S5P_CLKGATE_IP_LCD1), + SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210), +}; + +static struct clksrc_clk *sysclks[] = { + /* nothing here yet */ +}; + +static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable); +} + +static struct clksrc_clk clksrcs[] = { + { + .clk = { + .name = "sclk_sata", + .id = -1, + .enable = exynos4_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 24), + }, + .sources = &clkset_mout_corebus, + .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 }, + .reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimd", + .devname = "exynos4-fb.1", + .enable = exynos4_clksrc_mask_lcd1_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 }, + }, +}; + +static struct clk init_clocks_off[] = { + { + .name = "sataphy", + .id = -1, + .parent = &clk_aclk_133.clk, + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "sata", + .id = -1, + .parent = &clk_aclk_133.clk, + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 10), + }, { + .name = "fimd", + .devname = "exynos4-fb.1", + .enable = exynos4_clk_ip_lcd1_ctrl, + .ctrlbit = (1 << 0), + }, +}; + +#ifdef CONFIG_PM_SLEEP +static int exynos4210_clock_suspend(void) +{ + s3c_pm_do_save(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save)); + + return 0; +} + +static void exynos4210_clock_resume(void) +{ + s3c_pm_do_restore_core(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save)); +} + +#else +#define exynos4210_clock_suspend NULL +#define exynos4210_clock_resume NULL +#endif + +struct syscore_ops exynos4210_clock_syscore_ops = { + .suspend = exynos4210_clock_suspend, + .resume = exynos4210_clock_resume, +}; + +void __init exynos4210_register_clocks(void) +{ + int ptr; + + clk_mout_mpll.reg_src.reg = S5P_CLKSRC_CPU; + clk_mout_mpll.reg_src.shift = 8; + clk_mout_mpll.reg_src.size = 1; + + for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) + s3c_register_clksrc(sysclks[ptr], 1); + + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); + + s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + + register_syscore_ops(&exynos4210_clock_syscore_ops); +} diff --git a/arch/arm/mach-exynos4/clock-exynos4212.c b/arch/arm/mach-exynos4/clock-exynos4212.c new file mode 100644 index 00000000000..77d5decb34f --- /dev/null +++ b/arch/arm/mach-exynos4/clock-exynos4212.c @@ -0,0 +1,118 @@ +/* + * linux/arch/arm/mach-exynos4/clock-exynos4212.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4212 - Clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/syscore_ops.h> + +#include <plat/cpu-freq.h> +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/pll.h> +#include <plat/s5p-clock.h> +#include <plat/clock-clksrc.h> +#include <plat/exynos4.h> +#include <plat/pm.h> + +#include <mach/hardware.h> +#include <mach/map.h> +#include <mach/regs-clock.h> +#include <mach/exynos4-clock.h> + +static struct sleep_save exynos4212_clock_save[] = { + SAVE_ITEM(S5P_CLKSRC_IMAGE), + SAVE_ITEM(S5P_CLKDIV_IMAGE), + SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212), + SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212), +}; + +static struct clk *clk_src_mpll_user_list[] = { + [0] = &clk_fin_mpll, + [1] = &clk_mout_mpll.clk, +}; + +static struct clksrc_sources clk_src_mpll_user = { + .sources = clk_src_mpll_user_list, + .nr_sources = ARRAY_SIZE(clk_src_mpll_user_list), +}; + +static struct clksrc_clk clk_mout_mpll_user = { + .clk = { + .name = "mout_mpll_user", + }, + .sources = &clk_src_mpll_user, + .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 24, .size = 1 }, +}; + +static struct clksrc_clk *sysclks[] = { + &clk_mout_mpll_user, +}; + +static struct clksrc_clk clksrcs[] = { + /* nothing here yet */ +}; + +static struct clk init_clocks_off[] = { + /* nothing here yet */ +}; + +#ifdef CONFIG_PM_SLEEP +static int exynos4212_clock_suspend(void) +{ + s3c_pm_do_save(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save)); + + return 0; +} + +static void exynos4212_clock_resume(void) +{ + s3c_pm_do_restore_core(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save)); +} + +#else +#define exynos4212_clock_suspend NULL +#define exynos4212_clock_resume NULL +#endif + +struct syscore_ops exynos4212_clock_syscore_ops = { + .suspend = exynos4212_clock_suspend, + .resume = exynos4212_clock_resume, +}; + +void __init exynos4212_register_clocks(void) +{ + int ptr; + + /* usbphy1 is removed */ + clkset_group_list[4] = NULL; + + /* mout_mpll_user is used */ + clkset_group_list[6] = &clk_mout_mpll_user.clk; + clkset_aclk_top_list[0] = &clk_mout_mpll_user.clk; + + clk_mout_mpll.reg_src.reg = S5P_CLKSRC_DMC; + clk_mout_mpll.reg_src.shift = 12; + clk_mout_mpll.reg_src.size = 1; + + for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) + s3c_register_clksrc(sysclks[ptr], 1); + + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); + + s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + + register_syscore_ops(&exynos4212_clock_syscore_ops); +} diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c index 851dea01857..db616916d7a 100644 --- a/arch/arm/mach-exynos4/clock.c +++ b/arch/arm/mach-exynos4/clock.c @@ -13,6 +13,7 @@ #include <linux/kernel.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/syscore_ops.h> #include <plat/cpu-freq.h> #include <plat/clock.h> @@ -20,29 +21,101 @@ #include <plat/pll.h> #include <plat/s5p-clock.h> #include <plat/clock-clksrc.h> +#include <plat/exynos4.h> +#include <plat/pm.h> #include <mach/map.h> #include <mach/regs-clock.h> #include <mach/sysmmu.h> - -static struct clk clk_sclk_hdmi27m = { +#include <mach/exynos4-clock.h> + +static struct sleep_save exynos4_clock_save[] = { + SAVE_ITEM(S5P_CLKDIV_LEFTBUS), + SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS), + SAVE_ITEM(S5P_CLKDIV_RIGHTBUS), + SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS), + SAVE_ITEM(S5P_CLKSRC_TOP0), + SAVE_ITEM(S5P_CLKSRC_TOP1), + SAVE_ITEM(S5P_CLKSRC_CAM), + SAVE_ITEM(S5P_CLKSRC_TV), + SAVE_ITEM(S5P_CLKSRC_MFC), + SAVE_ITEM(S5P_CLKSRC_G3D), + SAVE_ITEM(S5P_CLKSRC_LCD0), + SAVE_ITEM(S5P_CLKSRC_MAUDIO), + SAVE_ITEM(S5P_CLKSRC_FSYS), + SAVE_ITEM(S5P_CLKSRC_PERIL0), + SAVE_ITEM(S5P_CLKSRC_PERIL1), + SAVE_ITEM(S5P_CLKDIV_CAM), + SAVE_ITEM(S5P_CLKDIV_TV), + SAVE_ITEM(S5P_CLKDIV_MFC), + SAVE_ITEM(S5P_CLKDIV_G3D), + SAVE_ITEM(S5P_CLKDIV_LCD0), + SAVE_ITEM(S5P_CLKDIV_MAUDIO), + SAVE_ITEM(S5P_CLKDIV_FSYS0), + SAVE_ITEM(S5P_CLKDIV_FSYS1), + SAVE_ITEM(S5P_CLKDIV_FSYS2), + SAVE_ITEM(S5P_CLKDIV_FSYS3), + SAVE_ITEM(S5P_CLKDIV_PERIL0), + SAVE_ITEM(S5P_CLKDIV_PERIL1), + SAVE_ITEM(S5P_CLKDIV_PERIL2), + SAVE_ITEM(S5P_CLKDIV_PERIL3), + SAVE_ITEM(S5P_CLKDIV_PERIL4), + SAVE_ITEM(S5P_CLKDIV_PERIL5), + SAVE_ITEM(S5P_CLKDIV_TOP), + SAVE_ITEM(S5P_CLKSRC_MASK_TOP), + SAVE_ITEM(S5P_CLKSRC_MASK_CAM), + SAVE_ITEM(S5P_CLKSRC_MASK_TV), + SAVE_ITEM(S5P_CLKSRC_MASK_LCD0), + SAVE_ITEM(S5P_CLKSRC_MASK_MAUDIO), + SAVE_ITEM(S5P_CLKSRC_MASK_FSYS), + SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0), + SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1), + SAVE_ITEM(S5P_CLKDIV2_RATIO), + SAVE_ITEM(S5P_CLKGATE_SCLKCAM), + SAVE_ITEM(S5P_CLKGATE_IP_CAM), + SAVE_ITEM(S5P_CLKGATE_IP_TV), + SAVE_ITEM(S5P_CLKGATE_IP_MFC), + SAVE_ITEM(S5P_CLKGATE_IP_G3D), + SAVE_ITEM(S5P_CLKGATE_IP_LCD0), + SAVE_ITEM(S5P_CLKGATE_IP_FSYS), + SAVE_ITEM(S5P_CLKGATE_IP_GPS), + SAVE_ITEM(S5P_CLKGATE_IP_PERIL), + SAVE_ITEM(S5P_CLKGATE_BLOCK), + SAVE_ITEM(S5P_CLKSRC_MASK_DMC), + SAVE_ITEM(S5P_CLKSRC_DMC), + SAVE_ITEM(S5P_CLKDIV_DMC0), + SAVE_ITEM(S5P_CLKDIV_DMC1), + SAVE_ITEM(S5P_CLKGATE_IP_DMC), + SAVE_ITEM(S5P_CLKSRC_CPU), + SAVE_ITEM(S5P_CLKDIV_CPU), + SAVE_ITEM(S5P_CLKDIV_CPU + 0x4), + SAVE_ITEM(S5P_CLKGATE_SCLKCPU), + SAVE_ITEM(S5P_CLKGATE_IP_CPU), +}; + +struct clk clk_sclk_hdmi27m = { .name = "sclk_hdmi27m", .rate = 27000000, }; -static struct clk clk_sclk_hdmiphy = { +struct clk clk_sclk_hdmiphy = { .name = "sclk_hdmiphy", }; -static struct clk clk_sclk_usbphy0 = { +struct clk clk_sclk_usbphy0 = { .name = "sclk_usbphy0", .rate = 27000000, }; -static struct clk clk_sclk_usbphy1 = { +struct clk clk_sclk_usbphy1 = { .name = "sclk_usbphy1", }; +static struct clk dummy_apb_pclk = { + .name = "apb_pclk", + .id = -1, +}; + static int exynos4_clksrc_mask_top_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKSRC_MASK_TOP, clk, enable); @@ -58,12 +131,7 @@ static int exynos4_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable) return s5p_gatectrl(S5P_CLKSRC_MASK_LCD0, clk, enable); } -static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable); -} - -static int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable) +int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKSRC_MASK_FSYS, clk, enable); } @@ -83,6 +151,11 @@ static int exynos4_clk_ip_mfc_ctrl(struct clk *clk, int enable) return s5p_gatectrl(S5P_CLKGATE_IP_MFC, clk, enable); } +static int exynos4_clksrc_mask_tv_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKSRC_MASK_TV, clk, enable); +} + static int exynos4_clk_ip_cam_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKGATE_IP_CAM, clk, enable); @@ -103,12 +176,12 @@ static int exynos4_clk_ip_lcd0_ctrl(struct clk *clk, int enable) return s5p_gatectrl(S5P_CLKGATE_IP_LCD0, clk, enable); } -static int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable) +int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKGATE_IP_LCD1, clk, enable); } -static int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable) +int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKGATE_IP_FSYS, clk, enable); } @@ -123,6 +196,16 @@ static int exynos4_clk_ip_perir_ctrl(struct clk *clk, int enable) return s5p_gatectrl(S5P_CLKGATE_IP_PERIR, clk, enable); } +static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable); +} + +static int exynos4_clk_dac_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable); +} + /* Core list of CMU_CPU side */ static struct clksrc_clk clk_mout_apll = { @@ -133,7 +216,7 @@ static struct clksrc_clk clk_mout_apll = { .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 0, .size = 1 }, }; -static struct clksrc_clk clk_sclk_apll = { +struct clksrc_clk clk_sclk_apll = { .clk = { .name = "sclk_apll", .parent = &clk_mout_apll.clk, @@ -141,7 +224,7 @@ static struct clksrc_clk clk_sclk_apll = { .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 24, .size = 3 }, }; -static struct clksrc_clk clk_mout_epll = { +struct clksrc_clk clk_mout_epll = { .clk = { .name = "mout_epll", }, @@ -149,12 +232,13 @@ static struct clksrc_clk clk_mout_epll = { .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 4, .size = 1 }, }; -static struct clksrc_clk clk_mout_mpll = { +struct clksrc_clk clk_mout_mpll = { .clk = { .name = "mout_mpll", }, .sources = &clk_src_mpll, - .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 8, .size = 1 }, + + /* reg_src will be added in each SoCs' clock */ }; static struct clk *clkset_moutcore_list[] = { @@ -224,12 +308,12 @@ static struct clksrc_clk clk_periphclk = { /* Core list of CMU_CORE side */ -static struct clk *clkset_corebus_list[] = { +struct clk *clkset_corebus_list[] = { [0] = &clk_mout_mpll.clk, [1] = &clk_sclk_apll.clk, }; -static struct clksrc_sources clkset_mout_corebus = { +struct clksrc_sources clkset_mout_corebus = { .sources = clkset_corebus_list, .nr_sources = ARRAY_SIZE(clkset_corebus_list), }; @@ -284,12 +368,12 @@ static struct clksrc_clk clk_pclk_acp = { /* Core list of CMU_TOP side */ -static struct clk *clkset_aclk_top_list[] = { +struct clk *clkset_aclk_top_list[] = { [0] = &clk_mout_mpll.clk, [1] = &clk_sclk_apll.clk, }; -static struct clksrc_sources clkset_aclk = { +struct clksrc_sources clkset_aclk = { .sources = clkset_aclk_top_list, .nr_sources = ARRAY_SIZE(clkset_aclk_top_list), }; @@ -321,7 +405,7 @@ static struct clksrc_clk clk_aclk_160 = { .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 8, .size = 3 }, }; -static struct clksrc_clk clk_aclk_133 = { +struct clksrc_clk clk_aclk_133 = { .clk = { .name = "aclk_133", }, @@ -360,7 +444,7 @@ static struct clksrc_sources clkset_sclk_vpll = { .nr_sources = ARRAY_SIZE(clkset_sclk_vpll_list), }; -static struct clksrc_clk clk_sclk_vpll = { +struct clksrc_clk clk_sclk_vpll = { .clk = { .name = "sclk_vpll", }, @@ -410,16 +494,6 @@ static struct clk init_clocks_off[] = { .enable = exynos4_clk_ip_lcd0_ctrl, .ctrlbit = (1 << 0), }, { - .name = "fimd", - .devname = "exynos4-fb.1", - .enable = exynos4_clk_ip_lcd1_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "sataphy", - .parent = &clk_aclk_133.clk, - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 3), - }, { .name = "hsmmc", .devname = "s3c-sdhci.0", .parent = &clk_aclk_133.clk, @@ -449,18 +523,48 @@ static struct clk init_clocks_off[] = { .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 9), }, { + .name = "dac", + .devname = "s5p-sdo", + .enable = exynos4_clk_ip_tv_ctrl, + .ctrlbit = (1 << 2), + }, { + .name = "mixer", + .devname = "s5p-mixer", + .enable = exynos4_clk_ip_tv_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "vp", + .devname = "s5p-mixer", + .enable = exynos4_clk_ip_tv_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "hdmi", + .devname = "exynos4-hdmi", + .enable = exynos4_clk_ip_tv_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "hdmiphy", + .devname = "exynos4-hdmi", + .enable = exynos4_clk_hdmiphy_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "dacphy", + .devname = "s5p-sdo", + .enable = exynos4_clk_dac_ctrl, + .ctrlbit = (1 << 0), + }, { .name = "sata", .parent = &clk_aclk_133.clk, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 10), }, { - .name = "pdma", - .devname = "s3c-pl330.0", + .name = "dma", + .devname = "dma-pl330.0", .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 0), }, { - .name = "pdma", - .devname = "s3c-pl330.1", + .name = "dma", + .devname = "dma-pl330.1", .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 1), }, { @@ -520,7 +624,7 @@ static struct clk init_clocks_off[] = { .ctrlbit = (1 << 21), }, { .name = "ac97", - .id = -1, + .devname = "samsung-ac97", .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 27), }, { @@ -581,6 +685,12 @@ static struct clk init_clocks_off[] = { .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 13), }, { + .name = "i2c", + .devname = "s3c2440-hdmiphy-i2c", + .parent = &clk_aclk_100.clk, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 14), + }, { .name = "SYSMMU_MDMA", .enable = exynos4_clk_ip_image_ctrl, .ctrlbit = (1 << 5), @@ -673,7 +783,7 @@ static struct clk init_clocks[] = { } }; -static struct clk *clkset_group_list[] = { +struct clk *clkset_group_list[] = { [0] = &clk_ext_xtal_mux, [1] = &clk_xusbxti, [2] = &clk_sclk_hdmi27m, @@ -685,7 +795,7 @@ static struct clk *clkset_group_list[] = { [8] = &clk_sclk_vpll.clk, }; -static struct clksrc_sources clkset_group = { +struct clksrc_sources clkset_group = { .sources = clkset_group_list, .nr_sources = ARRAY_SIZE(clkset_group_list), }; @@ -782,6 +892,81 @@ static struct clksrc_sources clkset_mout_mfc = { .nr_sources = ARRAY_SIZE(clkset_mout_mfc_list), }; +static struct clk *clkset_sclk_dac_list[] = { + [0] = &clk_sclk_vpll.clk, + [1] = &clk_sclk_hdmiphy, +}; + +static struct clksrc_sources clkset_sclk_dac = { + .sources = clkset_sclk_dac_list, + .nr_sources = ARRAY_SIZE(clkset_sclk_dac_list), +}; + +static struct clksrc_clk clk_sclk_dac = { + .clk = { + .name = "sclk_dac", + .enable = exynos4_clksrc_mask_tv_ctrl, + .ctrlbit = (1 << 8), + }, + .sources = &clkset_sclk_dac, + .reg_src = { .reg = S5P_CLKSRC_TV, .shift = 8, .size = 1 }, +}; + +static struct clksrc_clk clk_sclk_pixel = { + .clk = { + .name = "sclk_pixel", + .parent = &clk_sclk_vpll.clk, + }, + .reg_div = { .reg = S5P_CLKDIV_TV, .shift = 0, .size = 4 }, +}; + +static struct clk *clkset_sclk_hdmi_list[] = { + [0] = &clk_sclk_pixel.clk, + [1] = &clk_sclk_hdmiphy, +}; + +static struct clksrc_sources clkset_sclk_hdmi = { + .sources = clkset_sclk_hdmi_list, + .nr_sources = ARRAY_SIZE(clkset_sclk_hdmi_list), +}; + +static struct clksrc_clk clk_sclk_hdmi = { + .clk = { + .name = "sclk_hdmi", + .enable = exynos4_clksrc_mask_tv_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &clkset_sclk_hdmi, + .reg_src = { .reg = S5P_CLKSRC_TV, .shift = 0, .size = 1 }, +}; + +static struct clk *clkset_sclk_mixer_list[] = { + [0] = &clk_sclk_dac.clk, + [1] = &clk_sclk_hdmi.clk, +}; + +static struct clksrc_sources clkset_sclk_mixer = { + .sources = clkset_sclk_mixer_list, + .nr_sources = ARRAY_SIZE(clkset_sclk_mixer_list), +}; + +static struct clksrc_clk clk_sclk_mixer = { + .clk = { + .name = "sclk_mixer", + .enable = exynos4_clksrc_mask_tv_ctrl, + .ctrlbit = (1 << 4), + }, + .sources = &clkset_sclk_mixer, + .reg_src = { .reg = S5P_CLKSRC_TV, .shift = 4, .size = 1 }, +}; + +static struct clksrc_clk *sclk_tv[] = { + &clk_sclk_dac, + &clk_sclk_pixel, + &clk_sclk_hdmi, + &clk_sclk_mixer, +}; + static struct clksrc_clk clk_dout_mmc0 = { .clk = { .name = "dout_mmc0", @@ -899,8 +1084,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "exynos4-fimc.0", + .name = "sclk_cam0", .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 16), }, @@ -909,8 +1093,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "exynos4-fimc.1", + .name = "sclk_cam1", .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 20), }, @@ -969,25 +1152,6 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLKDIV_LCD0, .shift = 0, .size = 4 }, }, { .clk = { - .name = "sclk_fimd", - .devname = "exynos4-fb.1", - .enable = exynos4_clksrc_mask_lcd1_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &clkset_group, - .reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 }, - .reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_sata", - .enable = exynos4_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 24), - }, - .sources = &clkset_mout_corebus, - .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 }, - .reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 }, - }, { - .clk = { .name = "sclk_spi", .devname = "s3c64xx-spi.0", .enable = exynos4_clksrc_mask_peril1_ctrl, @@ -1116,20 +1280,91 @@ static int xtal_rate; static unsigned long exynos4_fout_apll_get_rate(struct clk *clk) { - return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0), pll_4508); + if (soc_is_exynos4210()) + return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0), + pll_4508); + else if (soc_is_exynos4212() || soc_is_exynos4412()) + return s5p_get_pll35xx(xtal_rate, __raw_readl(S5P_APLL_CON0)); + else + return 0; } static struct clk_ops exynos4_fout_apll_ops = { .get_rate = exynos4_fout_apll_get_rate, }; +static u32 vpll_div[][8] = { + { 54000000, 3, 53, 3, 1024, 0, 17, 0 }, + { 108000000, 3, 53, 2, 1024, 0, 17, 0 }, +}; + +static unsigned long exynos4_vpll_get_rate(struct clk *clk) +{ + return clk->rate; +} + +static int exynos4_vpll_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned int vpll_con0, vpll_con1 = 0; + unsigned int i; + + /* Return if nothing changed */ + if (clk->rate == rate) + return 0; + + vpll_con0 = __raw_readl(S5P_VPLL_CON0); + vpll_con0 &= ~(0x1 << 27 | \ + PLL90XX_MDIV_MASK << PLL46XX_MDIV_SHIFT | \ + PLL90XX_PDIV_MASK << PLL46XX_PDIV_SHIFT | \ + PLL90XX_SDIV_MASK << PLL46XX_SDIV_SHIFT); + + vpll_con1 = __raw_readl(S5P_VPLL_CON1); + vpll_con1 &= ~(PLL46XX_MRR_MASK << PLL46XX_MRR_SHIFT | \ + PLL46XX_MFR_MASK << PLL46XX_MFR_SHIFT | \ + PLL4650C_KDIV_MASK << PLL46XX_KDIV_SHIFT); + + for (i = 0; i < ARRAY_SIZE(vpll_div); i++) { + if (vpll_div[i][0] == rate) { + vpll_con0 |= vpll_div[i][1] << PLL46XX_PDIV_SHIFT; + vpll_con0 |= vpll_div[i][2] << PLL46XX_MDIV_SHIFT; + vpll_con0 |= vpll_div[i][3] << PLL46XX_SDIV_SHIFT; + vpll_con1 |= vpll_div[i][4] << PLL46XX_KDIV_SHIFT; + vpll_con1 |= vpll_div[i][5] << PLL46XX_MFR_SHIFT; + vpll_con1 |= vpll_div[i][6] << PLL46XX_MRR_SHIFT; + vpll_con0 |= vpll_div[i][7] << 27; + break; + } + } + + if (i == ARRAY_SIZE(vpll_div)) { + printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n", + __func__); + return -EINVAL; + } + + __raw_writel(vpll_con0, S5P_VPLL_CON0); + __raw_writel(vpll_con1, S5P_VPLL_CON1); + + /* Wait for VPLL lock */ + while (!(__raw_readl(S5P_VPLL_CON0) & (1 << PLL46XX_LOCKED_SHIFT))) + continue; + + clk->rate = rate; + return 0; +} + +static struct clk_ops exynos4_vpll_ops = { + .get_rate = exynos4_vpll_get_rate, + .set_rate = exynos4_vpll_set_rate, +}; + void __init_or_cpufreq exynos4_setup_clocks(void) { struct clk *xtal_clk; - unsigned long apll; - unsigned long mpll; - unsigned long epll; - unsigned long vpll; + unsigned long apll = 0; + unsigned long mpll = 0; + unsigned long epll = 0; + unsigned long vpll = 0; unsigned long vpllsrc; unsigned long xtal; unsigned long armclk; @@ -1153,18 +1388,34 @@ void __init_or_cpufreq exynos4_setup_clocks(void) printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); - apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0), pll_4508); - mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0), pll_4508); - epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0), - __raw_readl(S5P_EPLL_CON1), pll_4600); - - vpllsrc = clk_get_rate(&clk_vpllsrc.clk); - vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0), - __raw_readl(S5P_VPLL_CON1), pll_4650); + if (soc_is_exynos4210()) { + apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0), + pll_4508); + mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0), + pll_4508); + epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0), + __raw_readl(S5P_EPLL_CON1), pll_4600); + + vpllsrc = clk_get_rate(&clk_vpllsrc.clk); + vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0), + __raw_readl(S5P_VPLL_CON1), pll_4650c); + } else if (soc_is_exynos4212() || soc_is_exynos4412()) { + apll = s5p_get_pll35xx(xtal, __raw_readl(S5P_APLL_CON0)); + mpll = s5p_get_pll35xx(xtal, __raw_readl(S5P_MPLL_CON0)); + epll = s5p_get_pll36xx(xtal, __raw_readl(S5P_EPLL_CON0), + __raw_readl(S5P_EPLL_CON1)); + + vpllsrc = clk_get_rate(&clk_vpllsrc.clk); + vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(S5P_VPLL_CON0), + __raw_readl(S5P_VPLL_CON1)); + } else { + /* nothing */ + } clk_fout_apll.ops = &exynos4_fout_apll_ops; clk_fout_mpll.rate = mpll; clk_fout_epll.rate = epll; + clk_fout_vpll.ops = &exynos4_vpll_ops; clk_fout_vpll.rate = vpll; printk(KERN_INFO "EXYNOS4: PLL settings, A=%ld, M=%ld, E=%ld V=%ld", @@ -1192,7 +1443,32 @@ void __init_or_cpufreq exynos4_setup_clocks(void) } static struct clk *clks[] __initdata = { - /* Nothing here yet */ + &clk_sclk_hdmi27m, + &clk_sclk_hdmiphy, + &clk_sclk_usbphy0, + &clk_sclk_usbphy1, +}; + +#ifdef CONFIG_PM_SLEEP +static int exynos4_clock_suspend(void) +{ + s3c_pm_do_save(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save)); + return 0; +} + +static void exynos4_clock_resume(void) +{ + s3c_pm_do_restore_core(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save)); +} + +#else +#define exynos4_clock_suspend NULL +#define exynos4_clock_resume NULL +#endif + +struct syscore_ops exynos4_clock_syscore_ops = { + .suspend = exynos4_clock_suspend, + .resume = exynos4_clock_resume, }; void __init exynos4_register_clocks(void) @@ -1204,11 +1480,17 @@ void __init exynos4_register_clocks(void) for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) s3c_register_clksrc(sysclks[ptr], 1); + for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++) + s3c_register_clksrc(sclk_tv[ptr], 1); + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + register_syscore_ops(&exynos4_clock_syscore_ops); + s3c24xx_register_clock(&dummy_apb_pclk); + s3c_pwmclk_init(); } diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c index 2d8a40c9e6e..5b1765b37f7 100644 --- a/arch/arm/mach-exynos4/cpu.c +++ b/arch/arm/mach-exynos4/cpu.c @@ -24,12 +24,16 @@ #include <plat/exynos4.h> #include <plat/adc-core.h> #include <plat/sdhci.h> -#include <plat/devs.h> #include <plat/fb-core.h> #include <plat/fimc-core.h> #include <plat/iic-core.h> +#include <plat/reset.h> +#include <plat/tv-core.h> #include <mach/regs-irq.h> +#include <mach/regs-pmu.h> + +unsigned int gic_bank_offset __read_mostly; extern int combiner_init(unsigned int combiner_nr, void __iomem *base, unsigned int irq_start); @@ -43,11 +47,6 @@ static struct map_desc exynos4_iodesc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S5P_VA_SYSRAM, - .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM), - .length = SZ_4K, - .type = MT_DEVICE, - }, { .virtual = (unsigned long)S5P_VA_CMU, .pfn = __phys_to_pfn(EXYNOS4_PA_CMU), .length = SZ_128K, @@ -120,6 +119,24 @@ static struct map_desc exynos4_iodesc[] __initdata = { }, }; +static struct map_desc exynos4_iodesc0[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_SYSRAM, + .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM0), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static struct map_desc exynos4_iodesc1[] __initdata = { + { + .virtual = (unsigned long)S5P_VA_SYSRAM, + .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM1), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + static void exynos4_idle(void) { if (!need_resched()) @@ -128,6 +145,11 @@ static void exynos4_idle(void) local_irq_enable(); } +static void exynos4_sw_reset(void) +{ + __raw_writel(0x1, S5P_SWRESET); +} + /* * exynos4_map_io * @@ -137,6 +159,11 @@ void __init exynos4_map_io(void) { iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc)); + if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0) + iotable_init(exynos4_iodesc0, ARRAY_SIZE(exynos4_iodesc0)); + else + iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1)); + /* initialize device information early */ exynos4_default_sdhci0(); exynos4_default_sdhci1(); @@ -156,6 +183,7 @@ void __init exynos4_map_io(void) s3c_i2c2_setname("s3c2440-i2c"); s5p_fb_setname(0, "exynos4-fb"); + s5p_hdmi_setname("exynos4-hdmi"); } void __init exynos4_init_clocks(int xtal) @@ -164,24 +192,37 @@ void __init exynos4_init_clocks(int xtal) s3c24xx_register_baseclocks(xtal); s5p_register_clocks(xtal); + + if (soc_is_exynos4210()) + exynos4210_register_clocks(); + else if (soc_is_exynos4212() || soc_is_exynos4412()) + exynos4212_register_clocks(); + exynos4_register_clocks(); exynos4_setup_clocks(); } -static void exynos4_gic_irq_eoi(struct irq_data *d) +static void exynos4_gic_irq_fix_base(struct irq_data *d) { struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d); gic_data->cpu_base = S5P_VA_GIC_CPU + - (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id()); + (gic_bank_offset * smp_processor_id()); + + gic_data->dist_base = S5P_VA_GIC_DIST + + (gic_bank_offset * smp_processor_id()); } void __init exynos4_init_irq(void) { int irq; - gic_init(0, IRQ_SPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU); - gic_arch_extn.irq_eoi = exynos4_gic_irq_eoi; + gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000; + + gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU); + gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base; + gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base; + gic_arch_extn.irq_mask = exynos4_gic_irq_fix_base; for (irq = 0; irq < MAX_COMBINER_NR; irq++) { @@ -217,7 +258,11 @@ static int __init exynos4_l2x0_cache_init(void) { /* TAG, Data Latency Control: 2cycle */ __raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL); - __raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL); + + if (soc_is_exynos4210()) + __raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL); + else if (soc_is_exynos4212() || soc_is_exynos4412()) + __raw_writel(0x120, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL); /* L2X0 Prefetch Control */ __raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL); @@ -241,5 +286,8 @@ int __init exynos4_init(void) /* set idle function */ pm_idle = exynos4_idle; + /* set sw_reset function */ + s5p_reset_hook = exynos4_sw_reset; + return sysdev_register(&exynos4_sysdev); } diff --git a/arch/arm/mach-exynos4/dma.c b/arch/arm/mach-exynos4/dma.c index 564bb530f33..9667c61e64f 100644 --- a/arch/arm/mach-exynos4/dma.c +++ b/arch/arm/mach-exynos4/dma.c @@ -21,151 +21,229 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/amba/bus.h> +#include <linux/amba/pl330.h> +#include <asm/irq.h> #include <plat/devs.h> #include <plat/irqs.h> #include <mach/map.h> #include <mach/irqs.h> - -#include <plat/s3c-pl330-pdata.h> +#include <mach/dma.h> static u64 dma_dmamask = DMA_BIT_MASK(32); -static struct resource exynos4_pdma0_resource[] = { - [0] = { - .start = EXYNOS4_PA_PDMA0, - .end = EXYNOS4_PA_PDMA0 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PDMA0, - .end = IRQ_PDMA0, - .flags = IORESOURCE_IRQ, +struct dma_pl330_peri pdma0_peri[28] = { + { + .peri_id = (u8)DMACH_PCM0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_MSM_REQ0, + }, { + .peri_id = (u8)DMACH_MSM_REQ2, + }, { + .peri_id = (u8)DMACH_SPI0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S0S_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART4_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART4_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SLIMBUS0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SLIMBUS0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SLIMBUS2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SLIMBUS2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SLIMBUS4_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SLIMBUS4_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_AC97_MICIN, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_AC97_PCMIN, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_AC97_PCMOUT, + .rqtype = MEMTODEV, }, }; -static struct s3c_pl330_platdata exynos4_pdma0_pdata = { - .peri = { - [0] = DMACH_PCM0_RX, - [1] = DMACH_PCM0_TX, - [2] = DMACH_PCM2_RX, - [3] = DMACH_PCM2_TX, - [4] = DMACH_MSM_REQ0, - [5] = DMACH_MSM_REQ2, - [6] = DMACH_SPI0_RX, - [7] = DMACH_SPI0_TX, - [8] = DMACH_SPI2_RX, - [9] = DMACH_SPI2_TX, - [10] = DMACH_I2S0S_TX, - [11] = DMACH_I2S0_RX, - [12] = DMACH_I2S0_TX, - [13] = DMACH_I2S2_RX, - [14] = DMACH_I2S2_TX, - [15] = DMACH_UART0_RX, - [16] = DMACH_UART0_TX, - [17] = DMACH_UART2_RX, - [18] = DMACH_UART2_TX, - [19] = DMACH_UART4_RX, - [20] = DMACH_UART4_TX, - [21] = DMACH_SLIMBUS0_RX, - [22] = DMACH_SLIMBUS0_TX, - [23] = DMACH_SLIMBUS2_RX, - [24] = DMACH_SLIMBUS2_TX, - [25] = DMACH_SLIMBUS4_RX, - [26] = DMACH_SLIMBUS4_TX, - [27] = DMACH_AC97_MICIN, - [28] = DMACH_AC97_PCMIN, - [29] = DMACH_AC97_PCMOUT, - [30] = DMACH_MAX, - [31] = DMACH_MAX, - }, +struct dma_pl330_platdata exynos4_pdma0_pdata = { + .nr_valid_peri = ARRAY_SIZE(pdma0_peri), + .peri = pdma0_peri, }; -static struct platform_device exynos4_device_pdma0 = { - .name = "s3c-pl330", - .id = 0, - .num_resources = ARRAY_SIZE(exynos4_pdma0_resource), - .resource = exynos4_pdma0_resource, - .dev = { +struct amba_device exynos4_device_pdma0 = { + .dev = { + .init_name = "dma-pl330.0", .dma_mask = &dma_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &exynos4_pdma0_pdata, }, + .res = { + .start = EXYNOS4_PA_PDMA0, + .end = EXYNOS4_PA_PDMA0 + SZ_4K, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_PDMA0, NO_IRQ}, + .periphid = 0x00041330, }; -static struct resource exynos4_pdma1_resource[] = { - [0] = { - .start = EXYNOS4_PA_PDMA1, - .end = EXYNOS4_PA_PDMA1 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PDMA1, - .end = IRQ_PDMA1, - .flags = IORESOURCE_IRQ, +struct dma_pl330_peri pdma1_peri[25] = { + { + .peri_id = (u8)DMACH_PCM0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_MSM_REQ1, + }, { + .peri_id = (u8)DMACH_MSM_REQ3, + }, { + .peri_id = (u8)DMACH_SPI1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S0S_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART3_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART3_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SLIMBUS1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SLIMBUS1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SLIMBUS3_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SLIMBUS3_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SLIMBUS5_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SLIMBUS5_TX, + .rqtype = MEMTODEV, }, }; -static struct s3c_pl330_platdata exynos4_pdma1_pdata = { - .peri = { - [0] = DMACH_PCM0_RX, - [1] = DMACH_PCM0_TX, - [2] = DMACH_PCM1_RX, - [3] = DMACH_PCM1_TX, - [4] = DMACH_MSM_REQ1, - [5] = DMACH_MSM_REQ3, - [6] = DMACH_SPI1_RX, - [7] = DMACH_SPI1_TX, - [8] = DMACH_I2S0S_TX, - [9] = DMACH_I2S0_RX, - [10] = DMACH_I2S0_TX, - [11] = DMACH_I2S1_RX, - [12] = DMACH_I2S1_TX, - [13] = DMACH_UART0_RX, - [14] = DMACH_UART0_TX, - [15] = DMACH_UART1_RX, - [16] = DMACH_UART1_TX, - [17] = DMACH_UART3_RX, - [18] = DMACH_UART3_TX, - [19] = DMACH_SLIMBUS1_RX, - [20] = DMACH_SLIMBUS1_TX, - [21] = DMACH_SLIMBUS3_RX, - [22] = DMACH_SLIMBUS3_TX, - [23] = DMACH_SLIMBUS5_RX, - [24] = DMACH_SLIMBUS5_TX, - [25] = DMACH_SLIMBUS0AUX_RX, - [26] = DMACH_SLIMBUS0AUX_TX, - [27] = DMACH_SPDIF, - [28] = DMACH_MAX, - [29] = DMACH_MAX, - [30] = DMACH_MAX, - [31] = DMACH_MAX, - }, +struct dma_pl330_platdata exynos4_pdma1_pdata = { + .nr_valid_peri = ARRAY_SIZE(pdma1_peri), + .peri = pdma1_peri, }; -static struct platform_device exynos4_device_pdma1 = { - .name = "s3c-pl330", - .id = 1, - .num_resources = ARRAY_SIZE(exynos4_pdma1_resource), - .resource = exynos4_pdma1_resource, - .dev = { +struct amba_device exynos4_device_pdma1 = { + .dev = { + .init_name = "dma-pl330.1", .dma_mask = &dma_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &exynos4_pdma1_pdata, }, -}; - -static struct platform_device *exynos4_dmacs[] __initdata = { - &exynos4_device_pdma0, - &exynos4_device_pdma1, + .res = { + .start = EXYNOS4_PA_PDMA1, + .end = EXYNOS4_PA_PDMA1 + SZ_4K, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_PDMA1, NO_IRQ}, + .periphid = 0x00041330, }; static int __init exynos4_dma_init(void) { - platform_add_devices(exynos4_dmacs, ARRAY_SIZE(exynos4_dmacs)); + amba_device_register(&exynos4_device_pdma0, &iomem_resource); + amba_device_register(&exynos4_device_pdma1, &iomem_resource); return 0; } diff --git a/arch/arm/mach-exynos4/include/mach/clkdev.h b/arch/arm/mach-exynos4/include/mach/clkdev.h deleted file mode 100644 index 7dffa83d23f..00000000000 --- a/arch/arm/mach-exynos4/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __MACH_CLKDEV_H__ -#define __MACH_CLKDEV_H__ - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do {} while (0) - -#endif diff --git a/arch/arm/mach-exynos4/include/mach/dma.h b/arch/arm/mach-exynos4/include/mach/dma.h index 81209eb1409..201842a3769 100644 --- a/arch/arm/mach-exynos4/include/mach/dma.h +++ b/arch/arm/mach-exynos4/include/mach/dma.h @@ -20,7 +20,7 @@ #ifndef __MACH_DMA_H #define __MACH_DMA_H -/* This platform uses the common S3C DMA API driver for PL330 */ -#include <plat/s3c-dma-pl330.h> +/* This platform uses the common DMA API driver for PL330 */ +#include <plat/dma-pl330.h> #endif /* __MACH_DMA_H */ diff --git a/arch/arm/mach-exynos4/include/mach/entry-macro.S b/arch/arm/mach-exynos4/include/mach/entry-macro.S index d7a1e281ce7..4c9adbd87ea 100644 --- a/arch/arm/mach-exynos4/include/mach/entry-macro.S +++ b/arch/arm/mach-exynos4/include/mach/entry-macro.S @@ -17,12 +17,25 @@ .endm .macro get_irqnr_preamble, base, tmp - ldr \base, =gic_cpu_base_addr + mov \tmp, #0 + + mrc p15, 0, \base, c0, c0, 5 + and \base, \base, #3 + cmp \base, #0 + beq 1f + + ldr \tmp, =gic_bank_offset + ldr \tmp, [\tmp] + cmp \base, #1 + beq 1f + + cmp \base, #2 + addeq \tmp, \tmp, \tmp + addne \tmp, \tmp, \tmp, LSL #1 + +1: ldr \base, =gic_cpu_base_addr ldr \base, [\base] - mrc p15, 0, \tmp, c0, c0, 5 - and \tmp, \tmp, #3 - cmp \tmp, #1 - addeq \base, \base, #EXYNOS4_GIC_BANK_OFFSET + add \base, \base, \tmp .endm .macro arch_ret_to_user, tmp1, tmp2 @@ -80,4 +93,10 @@ /* As above, this assumes that irqstat and base are preserved.. */ .macro test_for_ltirq, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + mov \tmp, #0 + cmp \irqnr, #28 + moveq \tmp, #1 + streq \irqstat, [\base, #GIC_CPU_EOI] + cmp \tmp, #0 .endm diff --git a/arch/arm/mach-exynos4/include/mach/exynos4-clock.h b/arch/arm/mach-exynos4/include/mach/exynos4-clock.h new file mode 100644 index 00000000000..a07fcbf5525 --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/exynos4-clock.h @@ -0,0 +1,43 @@ +/* + * linux/arch/arm/mach-exynos4/include/mach/exynos4-clock.h + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Header file for exynos4 clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_CLOCK_H +#define __ASM_ARCH_CLOCK_H __FILE__ + +#include <linux/clk.h> + +extern struct clk clk_sclk_hdmi27m; +extern struct clk clk_sclk_usbphy0; +extern struct clk clk_sclk_usbphy1; +extern struct clk clk_sclk_hdmiphy; + +extern struct clksrc_clk clk_sclk_apll; +extern struct clksrc_clk clk_mout_mpll; +extern struct clksrc_clk clk_aclk_133; +extern struct clksrc_clk clk_mout_epll; +extern struct clksrc_clk clk_sclk_vpll; + +extern struct clk *clkset_corebus_list[]; +extern struct clksrc_sources clkset_mout_corebus; + +extern struct clk *clkset_aclk_top_list[]; +extern struct clksrc_sources clkset_aclk; + +extern struct clk *clkset_group_list[]; +extern struct clksrc_sources clkset_group; + +extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable); +extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable); +extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable); + +#endif /* __ASM_ARCH_CLOCK_H */ diff --git a/arch/arm/mach-exynos4/include/mach/irqs.h b/arch/arm/mach-exynos4/include/mach/irqs.h index 934d2a49398..dfd4b7eecb9 100644 --- a/arch/arm/mach-exynos4/include/mach/irqs.h +++ b/arch/arm/mach-exynos4/include/mach/irqs.h @@ -19,6 +19,8 @@ #define IRQ_PPI(x) S5P_IRQ(x+16) +#define IRQ_MCT_LOCALTIMER IRQ_PPI(12) + /* SPI: Shared Peripheral Interrupt */ #define IRQ_SPI(x) S5P_IRQ(x+32) @@ -80,9 +82,8 @@ #define IRQ_HSMMC3 IRQ_SPI(76) #define IRQ_DWMCI IRQ_SPI(77) -#define IRQ_MIPICSI0 IRQ_SPI(78) - -#define IRQ_MIPICSI1 IRQ_SPI(80) +#define IRQ_MIPI_CSIS0 IRQ_SPI(78) +#define IRQ_MIPI_CSIS1 IRQ_SPI(80) #define IRQ_ONENAND_AUDI IRQ_SPI(82) #define IRQ_ROTATOR IRQ_SPI(83) @@ -94,7 +95,11 @@ #define IRQ_2D IRQ_SPI(89) #define IRQ_PCIE IRQ_SPI(90) +#define IRQ_MIXER IRQ_SPI(91) +#define IRQ_HDMI IRQ_SPI(92) +#define IRQ_IIC_HDMIPHY IRQ_SPI(93) #define IRQ_MFC IRQ_SPI(94) +#define IRQ_SDO IRQ_SPI(95) #define IRQ_AUDIO_SS IRQ_SPI(96) #define IRQ_I2S0 IRQ_SPI(97) diff --git a/arch/arm/mach-exynos4/include/mach/map.h b/arch/arm/mach-exynos4/include/mach/map.h index d32296dc65e..918a979181a 100644 --- a/arch/arm/mach-exynos4/include/mach/map.h +++ b/arch/arm/mach-exynos4/include/mach/map.h @@ -23,7 +23,8 @@ #include <plat/map-s5p.h> -#define EXYNOS4_PA_SYSRAM 0x02020000 +#define EXYNOS4_PA_SYSRAM0 0x02025000 +#define EXYNOS4_PA_SYSRAM1 0x02020000 #define EXYNOS4_PA_FIMC0 0x11800000 #define EXYNOS4_PA_FIMC1 0x11810000 @@ -61,7 +62,6 @@ #define EXYNOS4_PA_GIC_CPU 0x10480000 #define EXYNOS4_PA_GIC_DIST 0x10490000 -#define EXYNOS4_GIC_BANK_OFFSET 0x8000 #define EXYNOS4_PA_COREPERI 0x10500000 #define EXYNOS4_PA_TWD 0x10500600 @@ -112,6 +112,12 @@ #define EXYNOS4_PA_UART 0x13800000 +#define EXYNOS4_PA_VP 0x12C00000 +#define EXYNOS4_PA_MIXER 0x12C10000 +#define EXYNOS4_PA_SDO 0x12C20000 +#define EXYNOS4_PA_HDMI 0x12D00000 +#define EXYNOS4_PA_IIC_HDMIPHY 0x138E0000 + #define EXYNOS4_PA_IIC(x) (0x13860000 + ((x) * 0x10000)) #define EXYNOS4_PA_ADC 0x13910000 @@ -161,6 +167,12 @@ #define S5P_PA_TIMER EXYNOS4_PA_TIMER #define S5P_PA_EHCI EXYNOS4_PA_EHCI +#define S5P_PA_SDO EXYNOS4_PA_SDO +#define S5P_PA_VP EXYNOS4_PA_VP +#define S5P_PA_MIXER EXYNOS4_PA_MIXER +#define S5P_PA_HDMI EXYNOS4_PA_HDMI +#define S5P_PA_IIC_HDMIPHY EXYNOS4_PA_IIC_HDMIPHY + #define SAMSUNG_PA_KEYPAD EXYNOS4_PA_KEYPAD /* UART */ diff --git a/arch/arm/mach-exynos4/include/mach/pm-core.h b/arch/arm/mach-exynos4/include/mach/pm-core.h index 1df3b81f96e..9d8da51e35c 100644 --- a/arch/arm/mach-exynos4/include/mach/pm-core.h +++ b/arch/arm/mach-exynos4/include/mach/pm-core.h @@ -14,6 +14,10 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ + +#ifndef __ASM_ARCH_PM_CORE_H +#define __ASM_ARCH_PM_CORE_H __FILE__ + #include <mach/regs-pmu.h> static inline void s3c_pm_debug_init_uart(void) @@ -53,7 +57,9 @@ static inline void s3c_pm_restored_gpios(void) /* nothing here yet */ } -static inline void s3c_pm_saved_gpios(void) +static inline void samsung_pm_saved_gpios(void) { /* nothing here yet */ } + +#endif /* __ASM_ARCH_PM_CORE_H */ diff --git a/arch/arm/mach-exynos4/include/mach/pmu.h b/arch/arm/mach-exynos4/include/mach/pmu.h index a952904b010..632dd563013 100644 --- a/arch/arm/mach-exynos4/include/mach/pmu.h +++ b/arch/arm/mach-exynos4/include/mach/pmu.h @@ -13,6 +13,8 @@ #ifndef __ASM_ARCH_PMU_H #define __ASM_ARCH_PMU_H __FILE__ +#define PMU_TABLE_END NULL + enum sys_powerdown { SYS_AFTR, SYS_LPA, @@ -20,6 +22,11 @@ enum sys_powerdown { NUM_SYS_POWERDOWN, }; +struct exynos4_pmu_conf { + void __iomem *reg; + unsigned int val[NUM_SYS_POWERDOWN]; +}; + extern void exynos4_sys_powerdown_conf(enum sys_powerdown mode); #endif /* __ASM_ARCH_PMU_H */ diff --git a/arch/arm/mach-exynos4/include/mach/regs-clock.h b/arch/arm/mach-exynos4/include/mach/regs-clock.h index d493fdb422f..6c37ebe9482 100644 --- a/arch/arm/mach-exynos4/include/mach/regs-clock.h +++ b/arch/arm/mach-exynos4/include/mach/regs-clock.h @@ -13,6 +13,7 @@ #ifndef __ASM_ARCH_REGS_CLOCK_H #define __ASM_ARCH_REGS_CLOCK_H __FILE__ +#include <plat/cpu.h> #include <mach/map.h> #define S5P_CLKREG(x) (S5P_VA_CMU + (x)) @@ -41,12 +42,20 @@ #define S5P_CLKSRC_G3D S5P_CLKREG(0x0C22C) #define S5P_CLKSRC_IMAGE S5P_CLKREG(0x0C230) #define S5P_CLKSRC_LCD0 S5P_CLKREG(0x0C234) -#define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238) #define S5P_CLKSRC_MAUDIO S5P_CLKREG(0x0C23C) #define S5P_CLKSRC_FSYS S5P_CLKREG(0x0C240) #define S5P_CLKSRC_PERIL0 S5P_CLKREG(0x0C250) #define S5P_CLKSRC_PERIL1 S5P_CLKREG(0x0C254) +#define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310) +#define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320) +#define S5P_CLKSRC_MASK_TV S5P_CLKREG(0x0C324) +#define S5P_CLKSRC_MASK_LCD0 S5P_CLKREG(0x0C334) +#define S5P_CLKSRC_MASK_MAUDIO S5P_CLKREG(0x0C33C) +#define S5P_CLKSRC_MASK_FSYS S5P_CLKREG(0x0C340) +#define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350) +#define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354) + #define S5P_CLKDIV_TOP S5P_CLKREG(0x0C510) #define S5P_CLKDIV_CAM S5P_CLKREG(0x0C520) #define S5P_CLKDIV_TV S5P_CLKREG(0x0C524) @@ -54,7 +63,6 @@ #define S5P_CLKDIV_G3D S5P_CLKREG(0x0C52C) #define S5P_CLKDIV_IMAGE S5P_CLKREG(0x0C530) #define S5P_CLKDIV_LCD0 S5P_CLKREG(0x0C534) -#define S5P_CLKDIV_LCD1 S5P_CLKREG(0x0C538) #define S5P_CLKDIV_MAUDIO S5P_CLKREG(0x0C53C) #define S5P_CLKDIV_FSYS0 S5P_CLKREG(0x0C540) #define S5P_CLKDIV_FSYS1 S5P_CLKREG(0x0C544) @@ -68,16 +76,6 @@ #define S5P_CLKDIV_PERIL5 S5P_CLKREG(0x0C564) #define S5P_CLKDIV2_RATIO S5P_CLKREG(0x0C580) -#define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310) -#define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320) -#define S5P_CLKSRC_MASK_TV S5P_CLKREG(0x0C324) -#define S5P_CLKSRC_MASK_LCD0 S5P_CLKREG(0x0C334) -#define S5P_CLKSRC_MASK_LCD1 S5P_CLKREG(0x0C338) -#define S5P_CLKSRC_MASK_MAUDIO S5P_CLKREG(0x0C33C) -#define S5P_CLKSRC_MASK_FSYS S5P_CLKREG(0x0C340) -#define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350) -#define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354) - #define S5P_CLKDIV_STAT_TOP S5P_CLKREG(0x0C610) #define S5P_CLKGATE_SCLKCAM S5P_CLKREG(0x0C820) @@ -85,13 +83,20 @@ #define S5P_CLKGATE_IP_TV S5P_CLKREG(0x0C924) #define S5P_CLKGATE_IP_MFC S5P_CLKREG(0x0C928) #define S5P_CLKGATE_IP_G3D S5P_CLKREG(0x0C92C) -#define S5P_CLKGATE_IP_IMAGE S5P_CLKREG(0x0C930) +#define S5P_CLKGATE_IP_IMAGE (soc_is_exynos4210() ? \ + S5P_CLKREG(0x0C930) : \ + S5P_CLKREG(0x04930)) +#define S5P_CLKGATE_IP_IMAGE_4210 S5P_CLKREG(0x0C930) +#define S5P_CLKGATE_IP_IMAGE_4212 S5P_CLKREG(0x04930) #define S5P_CLKGATE_IP_LCD0 S5P_CLKREG(0x0C934) -#define S5P_CLKGATE_IP_LCD1 S5P_CLKREG(0x0C938) #define S5P_CLKGATE_IP_FSYS S5P_CLKREG(0x0C940) #define S5P_CLKGATE_IP_GPS S5P_CLKREG(0x0C94C) #define S5P_CLKGATE_IP_PERIL S5P_CLKREG(0x0C950) -#define S5P_CLKGATE_IP_PERIR S5P_CLKREG(0x0C960) +#define S5P_CLKGATE_IP_PERIR (soc_is_exynos4210() ? \ + S5P_CLKREG(0x0C960) : \ + S5P_CLKREG(0x08960)) +#define S5P_CLKGATE_IP_PERIR_4210 S5P_CLKREG(0x0C960) +#define S5P_CLKGATE_IP_PERIR_4212 S5P_CLKREG(0x08960) #define S5P_CLKGATE_BLOCK S5P_CLKREG(0x0C970) #define S5P_CLKSRC_MASK_DMC S5P_CLKREG(0x10300) @@ -102,11 +107,17 @@ #define S5P_CLKGATE_IP_DMC S5P_CLKREG(0x10900) #define S5P_APLL_LOCK S5P_CLKREG(0x14000) -#define S5P_MPLL_LOCK S5P_CLKREG(0x14004) +#define S5P_MPLL_LOCK (soc_is_exynos4210() ? \ + S5P_CLKREG(0x14004) : \ + S5P_CLKREG(0x10008)) #define S5P_APLL_CON0 S5P_CLKREG(0x14100) #define S5P_APLL_CON1 S5P_CLKREG(0x14104) -#define S5P_MPLL_CON0 S5P_CLKREG(0x14108) -#define S5P_MPLL_CON1 S5P_CLKREG(0x1410C) +#define S5P_MPLL_CON0 (soc_is_exynos4210() ? \ + S5P_CLKREG(0x14108) : \ + S5P_CLKREG(0x10108)) +#define S5P_MPLL_CON1 (soc_is_exynos4210() ? \ + S5P_CLKREG(0x1410C) : \ + S5P_CLKREG(0x1010C)) #define S5P_CLKSRC_CPU S5P_CLKREG(0x14200) #define S5P_CLKMUX_STATCPU S5P_CLKREG(0x14400) @@ -183,6 +194,13 @@ #define S5P_CLKDIV_BUS_GPLR_SHIFT (4) #define S5P_CLKDIV_BUS_GPLR_MASK (0x7 << S5P_CLKDIV_BUS_GPLR_SHIFT) +/* Only for EXYNOS4210 */ + +#define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238) +#define S5P_CLKSRC_MASK_LCD1 S5P_CLKREG(0x0C338) +#define S5P_CLKDIV_LCD1 S5P_CLKREG(0x0C538) +#define S5P_CLKGATE_IP_LCD1 S5P_CLKREG(0x0C938) + /* Compatibility defines and inclusion */ #include <mach/regs-pmu.h> diff --git a/arch/arm/mach-exynos4/include/mach/regs-mct.h b/arch/arm/mach-exynos4/include/mach/regs-mct.h index ca9c8434b02..80dd02ad6d6 100644 --- a/arch/arm/mach-exynos4/include/mach/regs-mct.h +++ b/arch/arm/mach-exynos4/include/mach/regs-mct.h @@ -31,8 +31,9 @@ #define EXYNOS4_MCT_G_INT_ENB EXYNOS4_MCTREG(0x248) #define EXYNOS4_MCT_G_WSTAT EXYNOS4_MCTREG(0x24C) -#define EXYNOS4_MCT_L0_BASE EXYNOS4_MCTREG(0x300) -#define EXYNOS4_MCT_L1_BASE EXYNOS4_MCTREG(0x400) +#define _EXYNOS4_MCT_L_BASE EXYNOS4_MCTREG(0x300) +#define EXYNOS4_MCT_L_BASE(x) (_EXYNOS4_MCT_L_BASE + (0x100 * x)) +#define EXYNOS4_MCT_L_MASK (0xffffff00) #define MCT_L_TCNTB_OFFSET (0x00) #define MCT_L_ICNTB_OFFSET (0x08) diff --git a/arch/arm/mach-exynos4/include/mach/regs-pmu.h b/arch/arm/mach-exynos4/include/mach/regs-pmu.h index fa49bbb8e7b..4fff8e938fe 100644 --- a/arch/arm/mach-exynos4/include/mach/regs-pmu.h +++ b/arch/arm/mach-exynos4/include/mach/regs-pmu.h @@ -25,23 +25,28 @@ #define S5P_USE_STANDBY_WFI0 (1 << 16) #define S5P_USE_STANDBY_WFI1 (1 << 17) +#define S5P_USE_STANDBYWFI_ISP_ARM (1 << 18) #define S5P_USE_STANDBY_WFE0 (1 << 24) #define S5P_USE_STANDBY_WFE1 (1 << 25) -#define S5P_USE_MASK ((0x3 << 16) | (0x3 << 24)) +#define S5P_USE_STANDBYWFE_ISP_ARM (1 << 26) + +#define S5P_SWRESET S5P_PMUREG(0x0400) #define S5P_WAKEUP_STAT S5P_PMUREG(0x0600) #define S5P_EINT_WAKEUP_MASK S5P_PMUREG(0x0604) #define S5P_WAKEUP_MASK S5P_PMUREG(0x0608) -#define S5P_USBHOST_PHY_CONTROL S5P_PMUREG(0x0708) -#define S5P_USBHOST_PHY_ENABLE (1 << 0) +#define S5P_HDMI_PHY_CONTROL S5P_PMUREG(0x0700) +#define S5P_HDMI_PHY_ENABLE (1 << 0) + +#define S5P_DAC_PHY_CONTROL S5P_PMUREG(0x070C) +#define S5P_DAC_PHY_ENABLE (1 << 0) #define S5P_MIPI_DPHY_CONTROL(n) S5P_PMUREG(0x0710 + (n) * 4) #define S5P_MIPI_DPHY_ENABLE (1 << 0) #define S5P_MIPI_DPHY_SRESETN (1 << 1) #define S5P_MIPI_DPHY_MRESETN (1 << 2) -#define S5P_PMU_SATA_PHY_CONTROL S5P_PMUREG(0x0720) #define S5P_INFORM0 S5P_PMUREG(0x0800) #define S5P_INFORM1 S5P_PMUREG(0x0804) #define S5P_INFORM2 S5P_PMUREG(0x0808) @@ -74,7 +79,6 @@ #define S5P_CMU_CLKSTOP_MFC_LOWPWR S5P_PMUREG(0x1148) #define S5P_CMU_CLKSTOP_G3D_LOWPWR S5P_PMUREG(0x114C) #define S5P_CMU_CLKSTOP_LCD0_LOWPWR S5P_PMUREG(0x1150) -#define S5P_CMU_CLKSTOP_LCD1_LOWPWR S5P_PMUREG(0x1154) #define S5P_CMU_CLKSTOP_MAUDIO_LOWPWR S5P_PMUREG(0x1158) #define S5P_CMU_CLKSTOP_GPS_LOWPWR S5P_PMUREG(0x115C) #define S5P_CMU_RESET_CAM_LOWPWR S5P_PMUREG(0x1160) @@ -82,7 +86,6 @@ #define S5P_CMU_RESET_MFC_LOWPWR S5P_PMUREG(0x1168) #define S5P_CMU_RESET_G3D_LOWPWR S5P_PMUREG(0x116C) #define S5P_CMU_RESET_LCD0_LOWPWR S5P_PMUREG(0x1170) -#define S5P_CMU_RESET_LCD1_LOWPWR S5P_PMUREG(0x1174) #define S5P_CMU_RESET_MAUDIO_LOWPWR S5P_PMUREG(0x1178) #define S5P_CMU_RESET_GPS_LOWPWR S5P_PMUREG(0x117C) #define S5P_TOP_BUS_LOWPWR S5P_PMUREG(0x1180) @@ -90,14 +93,11 @@ #define S5P_TOP_PWR_LOWPWR S5P_PMUREG(0x1188) #define S5P_LOGIC_RESET_LOWPWR S5P_PMUREG(0x11A0) #define S5P_ONENAND_MEM_LOWPWR S5P_PMUREG(0x11C0) -#define S5P_MODIMIF_MEM_LOWPWR S5P_PMUREG(0x11C4) #define S5P_G2D_ACP_MEM_LOWPWR S5P_PMUREG(0x11C8) #define S5P_USBOTG_MEM_LOWPWR S5P_PMUREG(0x11CC) #define S5P_HSMMC_MEM_LOWPWR S5P_PMUREG(0x11D0) #define S5P_CSSYS_MEM_LOWPWR S5P_PMUREG(0x11D4) #define S5P_SECSS_MEM_LOWPWR S5P_PMUREG(0x11D8) -#define S5P_PCIE_MEM_LOWPWR S5P_PMUREG(0x11E0) -#define S5P_SATA_MEM_LOWPWR S5P_PMUREG(0x11E4) #define S5P_PAD_RETENTION_DRAM_LOWPWR S5P_PMUREG(0x1200) #define S5P_PAD_RETENTION_MAUDIO_LOWPWR S5P_PMUREG(0x1204) #define S5P_PAD_RETENTION_GPIO_LOWPWR S5P_PMUREG(0x1220) @@ -118,7 +118,6 @@ #define S5P_MFC_LOWPWR S5P_PMUREG(0x1388) #define S5P_G3D_LOWPWR S5P_PMUREG(0x138C) #define S5P_LCD0_LOWPWR S5P_PMUREG(0x1390) -#define S5P_LCD1_LOWPWR S5P_PMUREG(0x1394) #define S5P_MAUDIO_LOWPWR S5P_PMUREG(0x1398) #define S5P_GPS_LOWPWR S5P_PMUREG(0x139C) #define S5P_GPS_ALIVE_LOWPWR S5P_PMUREG(0x13A0) @@ -154,7 +153,6 @@ #define S5P_PMU_MFC_CONF S5P_PMUREG(0x3C40) #define S5P_PMU_G3D_CONF S5P_PMUREG(0x3C60) #define S5P_PMU_LCD0_CONF S5P_PMUREG(0x3C80) -#define S5P_PMU_LCD1_CONF S5P_PMUREG(0x3CA0) #define S5P_PMU_GPS_CONF S5P_PMUREG(0x3CE0) #define S5P_PMU_SATA_PHY_CONTROL_EN 0x1 @@ -163,4 +161,60 @@ #define S5P_CHECK_SLEEP 0x00000BAD +/* Only for EXYNOS4210 */ +#define S5P_USBHOST_PHY_CONTROL S5P_PMUREG(0x0708) +#define S5P_USBHOST_PHY_ENABLE (1 << 0) + +#define S5P_PMU_SATA_PHY_CONTROL S5P_PMUREG(0x0720) + +#define S5P_CMU_CLKSTOP_LCD1_LOWPWR S5P_PMUREG(0x1154) +#define S5P_CMU_RESET_LCD1_LOWPWR S5P_PMUREG(0x1174) +#define S5P_MODIMIF_MEM_LOWPWR S5P_PMUREG(0x11C4) +#define S5P_PCIE_MEM_LOWPWR S5P_PMUREG(0x11E0) +#define S5P_SATA_MEM_LOWPWR S5P_PMUREG(0x11E4) +#define S5P_LCD1_LOWPWR S5P_PMUREG(0x1394) + +#define S5P_PMU_LCD1_CONF S5P_PMUREG(0x3CA0) + +/* Only for EXYNOS4212 */ +#define S5P_ISP_ARM_LOWPWR S5P_PMUREG(0x1050) +#define S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR S5P_PMUREG(0x1054) +#define S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR S5P_PMUREG(0x1058) +#define S5P_CMU_ACLKSTOP_COREBLK_LOWPWR S5P_PMUREG(0x1110) +#define S5P_CMU_SCLKSTOP_COREBLK_LOWPWR S5P_PMUREG(0x1114) +#define S5P_CMU_RESET_COREBLK_LOWPWR S5P_PMUREG(0x111C) +#define S5P_MPLLUSER_SYSCLK_LOWPWR S5P_PMUREG(0x1130) +#define S5P_CMU_CLKSTOP_ISP_LOWPWR S5P_PMUREG(0x1154) +#define S5P_CMU_RESET_ISP_LOWPWR S5P_PMUREG(0x1174) +#define S5P_TOP_BUS_COREBLK_LOWPWR S5P_PMUREG(0x1190) +#define S5P_TOP_RETENTION_COREBLK_LOWPWR S5P_PMUREG(0x1194) +#define S5P_TOP_PWR_COREBLK_LOWPWR S5P_PMUREG(0x1198) +#define S5P_OSCCLK_GATE_LOWPWR S5P_PMUREG(0x11A4) +#define S5P_LOGIC_RESET_COREBLK_LOWPWR S5P_PMUREG(0x11B0) +#define S5P_OSCCLK_GATE_COREBLK_LOWPWR S5P_PMUREG(0x11B4) +#define S5P_HSI_MEM_LOWPWR S5P_PMUREG(0x11C4) +#define S5P_ROTATOR_MEM_LOWPWR S5P_PMUREG(0x11DC) +#define S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR S5P_PMUREG(0x123C) +#define S5P_PAD_ISOLATION_COREBLK_LOWPWR S5P_PMUREG(0x1250) +#define S5P_GPIO_MODE_COREBLK_LOWPWR S5P_PMUREG(0x1320) +#define S5P_TOP_ASB_RESET_LOWPWR S5P_PMUREG(0x1344) +#define S5P_TOP_ASB_ISOLATION_LOWPWR S5P_PMUREG(0x1348) +#define S5P_ISP_LOWPWR S5P_PMUREG(0x1394) +#define S5P_DRAM_FREQ_DOWN_LOWPWR S5P_PMUREG(0x13B0) +#define S5P_DDRPHY_DLLOFF_LOWPWR S5P_PMUREG(0x13B4) +#define S5P_CMU_SYSCLK_ISP_LOWPWR S5P_PMUREG(0x13B8) +#define S5P_CMU_SYSCLK_GPS_LOWPWR S5P_PMUREG(0x13BC) +#define S5P_LPDDR_PHY_DLL_LOCK_LOWPWR S5P_PMUREG(0x13C0) + +#define S5P_ARM_L2_0_OPTION S5P_PMUREG(0x2608) +#define S5P_ARM_L2_1_OPTION S5P_PMUREG(0x2628) +#define S5P_ONENAND_MEM_OPTION S5P_PMUREG(0x2E08) +#define S5P_HSI_MEM_OPTION S5P_PMUREG(0x2E28) +#define S5P_G2D_ACP_MEM_OPTION S5P_PMUREG(0x2E48) +#define S5P_USBOTG_MEM_OPTION S5P_PMUREG(0x2E68) +#define S5P_HSMMC_MEM_OPTION S5P_PMUREG(0x2E88) +#define S5P_CSSYS_MEM_OPTION S5P_PMUREG(0x2EA8) +#define S5P_SECSS_MEM_OPTION S5P_PMUREG(0x2EC8) +#define S5P_ROTATOR_MEM_OPTION S5P_PMUREG(0x2F48) + #endif /* __ASM_ARCH_REGS_PMU_H */ diff --git a/arch/arm/mach-exynos4/irq-eint.c b/arch/arm/mach-exynos4/irq-eint.c index 9d87d2ac7f6..badb8c66fc9 100644 --- a/arch/arm/mach-exynos4/irq-eint.c +++ b/arch/arm/mach-exynos4/irq-eint.c @@ -23,6 +23,8 @@ #include <mach/regs-gpio.h> +#include <asm/mach/irq.h> + static DEFINE_SPINLOCK(eint_lock); static unsigned int eint0_15_data[16]; @@ -184,8 +186,11 @@ static inline void exynos4_irq_demux_eint(unsigned int start) static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) { + struct irq_chip *chip = irq_get_chip(irq); + chained_irq_enter(chip, desc); exynos4_irq_demux_eint(IRQ_EINT(16)); exynos4_irq_demux_eint(IRQ_EINT(24)); + chained_irq_exit(chip, desc); } static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc) @@ -193,6 +198,7 @@ static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc) u32 *irq_data = irq_get_handler_data(irq); struct irq_chip *chip = irq_get_chip(irq); + chained_irq_enter(chip, desc); chip->irq_mask(&desc->irq_data); if (chip->irq_ack) @@ -201,6 +207,7 @@ static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc) generic_handle_irq(*irq_data); chip->irq_unmask(&desc->irq_data); + chained_irq_exit(chip, desc); } int __init exynos4_init_irq_eint(void) diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos4/mach-nuri.c index 6e0536818bf..2204911a24e 100644 --- a/arch/arm/mach-exynos4/mach-nuri.c +++ b/arch/arm/mach-exynos4/mach-nuri.c @@ -32,10 +32,12 @@ #include <asm/mach-types.h> #include <plat/adc.h> +#include <plat/regs-fb-v4.h> #include <plat/regs-serial.h> #include <plat/exynos4.h> #include <plat/cpu.h> #include <plat/devs.h> +#include <plat/fb.h> #include <plat/sdhci.h> #include <plat/ehci.h> #include <plat/clock.h> @@ -199,6 +201,33 @@ static struct platform_device nuri_gpio_keys = { }, }; +/* Frame Buffer */ +static struct s3c_fb_pd_win nuri_fb_win0 = { + .win_mode = { + .left_margin = 64, + .right_margin = 16, + .upper_margin = 64, + .lower_margin = 1, + .hsync_len = 48, + .vsync_len = 3, + .xres = 1280, + .yres = 800, + .refresh = 60, + }, + .max_bpp = 24, + .default_bpp = 16, + .virtual_x = 1280, + .virtual_y = 800, +}; + +static struct s3c_fb_platdata nuri_fb_pdata __initdata = { + .win[0] = &nuri_fb_win0, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB | + VIDCON0_CLKSEL_LCD, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, + .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, +}; + static void nuri_lcd_power_on(struct plat_lcd_data *pd, unsigned int power) { int gpio = EXYNOS4_GPE1(5); @@ -1092,6 +1121,7 @@ static struct platform_device *nuri_devices[] __initdata = { /* Samsung Platform Devices */ &s3c_device_i2c5, /* PMIC should initialize first */ &emmc_fixed_voltage, + &s5p_device_fimd0, &s3c_device_hsmmc0, &s3c_device_hsmmc2, &s3c_device_hsmmc3, @@ -1106,6 +1136,7 @@ static struct platform_device *nuri_devices[] __initdata = { &s5p_device_mfc_l, &s5p_device_mfc_r, &exynos4_device_pd[PD_MFC], + &exynos4_device_pd[PD_LCD0], /* NURI Devices */ &nuri_gpio_keys, @@ -1142,12 +1173,15 @@ static void __init nuri_machine_init(void) i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3)); i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs)); + s5p_fimd0_set_platdata(&nuri_fb_pdata); + nuri_ehci_init(); clk_xusbxti.rate = 24000000; /* Last */ platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices)); s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev; + s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev; } MACHINE_START(NURI, "NURI") diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c new file mode 100644 index 00000000000..71db8480bb5 --- /dev/null +++ b/arch/arm/mach-exynos4/mach-origen.c @@ -0,0 +1,679 @@ +/* linux/arch/arm/mach-exynos4/mach-origen.c + * + * Copyright (c) 2011 Insignal Co., Ltd. + * http://www.insignal.co.kr/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/serial_core.h> +#include <linux/gpio.h> +#include <linux/mmc/host.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/input.h> +#include <linux/pwm_backlight.h> +#include <linux/gpio_keys.h> +#include <linux/i2c.h> +#include <linux/regulator/machine.h> +#include <linux/mfd/max8997.h> +#include <linux/lcd.h> + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <video/platform_lcd.h> + +#include <plat/regs-serial.h> +#include <plat/regs-fb-v4.h> +#include <plat/exynos4.h> +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/sdhci.h> +#include <plat/iic.h> +#include <plat/ehci.h> +#include <plat/clock.h> +#include <plat/gpio-cfg.h> +#include <plat/backlight.h> +#include <plat/pd.h> +#include <plat/fb.h> + +#include <mach/map.h> + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define ORIGEN_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define ORIGEN_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define ORIGEN_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG4 | \ + S5PV210_UFCON_RXTRIG4) + +static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = ORIGEN_UCON_DEFAULT, + .ulcon = ORIGEN_ULCON_DEFAULT, + .ufcon = ORIGEN_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = ORIGEN_UCON_DEFAULT, + .ulcon = ORIGEN_ULCON_DEFAULT, + .ufcon = ORIGEN_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = ORIGEN_UCON_DEFAULT, + .ulcon = ORIGEN_ULCON_DEFAULT, + .ufcon = ORIGEN_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = ORIGEN_UCON_DEFAULT, + .ulcon = ORIGEN_ULCON_DEFAULT, + .ufcon = ORIGEN_UFCON_DEFAULT, + }, +}; + +static struct regulator_consumer_supply __initdata ldo3_consumer[] = { + REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), /* MIPI */ +}; +static struct regulator_consumer_supply __initdata ldo6_consumer[] = { + REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"), /* MIPI */ +}; +static struct regulator_consumer_supply __initdata ldo7_consumer[] = { + REGULATOR_SUPPLY("avdd", "alc5625"), /* Realtek ALC5625 */ +}; +static struct regulator_consumer_supply __initdata ldo8_consumer[] = { + REGULATOR_SUPPLY("vdd", "s5p-adc"), /* ADC */ +}; +static struct regulator_consumer_supply __initdata ldo9_consumer[] = { + REGULATOR_SUPPLY("dvdd", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */ +}; +static struct regulator_consumer_supply __initdata ldo11_consumer[] = { + REGULATOR_SUPPLY("dvdd", "alc5625"), /* Realtek ALC5625 */ +}; +static struct regulator_consumer_supply __initdata ldo14_consumer[] = { + REGULATOR_SUPPLY("avdd18", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */ +}; +static struct regulator_consumer_supply __initdata ldo17_consumer[] = { + REGULATOR_SUPPLY("vdd33", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */ +}; +static struct regulator_consumer_supply __initdata buck1_consumer[] = { + REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */ +}; +static struct regulator_consumer_supply __initdata buck2_consumer[] = { + REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */ +}; +static struct regulator_consumer_supply __initdata buck3_consumer[] = { + REGULATOR_SUPPLY("vdd_g3d", "mali_drm"), /* G3D */ +}; +static struct regulator_consumer_supply __initdata buck7_consumer[] = { + REGULATOR_SUPPLY("vcc", "platform-lcd"), /* LCD */ +}; + +static struct regulator_init_data __initdata max8997_ldo1_data = { + .constraints = { + .name = "VDD_ABB_3.3V", + .min_uV = 3300000, + .max_uV = 3300000, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_ldo2_data = { + .constraints = { + .name = "VDD_ALIVE_1.1V", + .min_uV = 1100000, + .max_uV = 1100000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_ldo3_data = { + .constraints = { + .name = "VMIPI_1.1V", + .min_uV = 1100000, + .max_uV = 1100000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(ldo3_consumer), + .consumer_supplies = ldo3_consumer, +}; + +static struct regulator_init_data __initdata max8997_ldo4_data = { + .constraints = { + .name = "VDD_RTC_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_ldo6_data = { + .constraints = { + .name = "VMIPI_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(ldo6_consumer), + .consumer_supplies = ldo6_consumer, +}; + +static struct regulator_init_data __initdata max8997_ldo7_data = { + .constraints = { + .name = "VDD_AUD_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(ldo7_consumer), + .consumer_supplies = ldo7_consumer, +}; + +static struct regulator_init_data __initdata max8997_ldo8_data = { + .constraints = { + .name = "VADC_3.3V", + .min_uV = 3300000, + .max_uV = 3300000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(ldo8_consumer), + .consumer_supplies = ldo8_consumer, +}; + +static struct regulator_init_data __initdata max8997_ldo9_data = { + .constraints = { + .name = "DVDD_SWB_2.8V", + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(ldo9_consumer), + .consumer_supplies = ldo9_consumer, +}; + +static struct regulator_init_data __initdata max8997_ldo10_data = { + .constraints = { + .name = "VDD_PLL_1.1V", + .min_uV = 1100000, + .max_uV = 1100000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_ldo11_data = { + .constraints = { + .name = "VDD_AUD_3V", + .min_uV = 3000000, + .max_uV = 3000000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(ldo11_consumer), + .consumer_supplies = ldo11_consumer, +}; + +static struct regulator_init_data __initdata max8997_ldo14_data = { + .constraints = { + .name = "AVDD18_SWB_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(ldo14_consumer), + .consumer_supplies = ldo14_consumer, +}; + +static struct regulator_init_data __initdata max8997_ldo17_data = { + .constraints = { + .name = "VDD_SWB_3.3V", + .min_uV = 3300000, + .max_uV = 3300000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(ldo17_consumer), + .consumer_supplies = ldo17_consumer, +}; + +static struct regulator_init_data __initdata max8997_ldo21_data = { + .constraints = { + .name = "VDD_MIF_1.2V", + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_buck1_data = { + .constraints = { + .name = "VDD_ARM_1.2V", + .min_uV = 950000, + .max_uV = 1350000, + .always_on = 1, + .boot_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(buck1_consumer), + .consumer_supplies = buck1_consumer, +}; + +static struct regulator_init_data __initdata max8997_buck2_data = { + .constraints = { + .name = "VDD_INT_1.1V", + .min_uV = 900000, + .max_uV = 1100000, + .always_on = 1, + .boot_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(buck2_consumer), + .consumer_supplies = buck2_consumer, +}; + +static struct regulator_init_data __initdata max8997_buck3_data = { + .constraints = { + .name = "VDD_G3D_1.1V", + .min_uV = 900000, + .max_uV = 1100000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(buck3_consumer), + .consumer_supplies = buck3_consumer, +}; + +static struct regulator_init_data __initdata max8997_buck5_data = { + .constraints = { + .name = "VDDQ_M1M2_1.2V", + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_buck7_data = { + .constraints = { + .name = "VDD_LCD_3.3V", + .min_uV = 3300000, + .max_uV = 3300000, + .boot_on = 1, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1 + }, + }, + .num_consumer_supplies = ARRAY_SIZE(buck7_consumer), + .consumer_supplies = buck7_consumer, +}; + +static struct max8997_regulator_data __initdata origen_max8997_regulators[] = { + { MAX8997_LDO1, &max8997_ldo1_data }, + { MAX8997_LDO2, &max8997_ldo2_data }, + { MAX8997_LDO3, &max8997_ldo3_data }, + { MAX8997_LDO4, &max8997_ldo4_data }, + { MAX8997_LDO6, &max8997_ldo6_data }, + { MAX8997_LDO7, &max8997_ldo7_data }, + { MAX8997_LDO8, &max8997_ldo8_data }, + { MAX8997_LDO9, &max8997_ldo9_data }, + { MAX8997_LDO10, &max8997_ldo10_data }, + { MAX8997_LDO11, &max8997_ldo11_data }, + { MAX8997_LDO14, &max8997_ldo14_data }, + { MAX8997_LDO17, &max8997_ldo17_data }, + { MAX8997_LDO21, &max8997_ldo21_data }, + { MAX8997_BUCK1, &max8997_buck1_data }, + { MAX8997_BUCK2, &max8997_buck2_data }, + { MAX8997_BUCK3, &max8997_buck3_data }, + { MAX8997_BUCK5, &max8997_buck5_data }, + { MAX8997_BUCK7, &max8997_buck7_data }, +}; + +struct max8997_platform_data __initdata origen_max8997_pdata = { + .num_regulators = ARRAY_SIZE(origen_max8997_regulators), + .regulators = origen_max8997_regulators, + + .wakeup = true, + .buck1_gpiodvs = false, + .buck2_gpiodvs = false, + .buck5_gpiodvs = false, + .irq_base = IRQ_GPIO_END + 1, + + .ignore_gpiodvs_side_effect = true, + .buck125_default_idx = 0x0, + + .buck125_gpios[0] = EXYNOS4_GPX0(0), + .buck125_gpios[1] = EXYNOS4_GPX0(1), + .buck125_gpios[2] = EXYNOS4_GPX0(2), + + .buck1_voltage[0] = 1350000, + .buck1_voltage[1] = 1300000, + .buck1_voltage[2] = 1250000, + .buck1_voltage[3] = 1200000, + .buck1_voltage[4] = 1150000, + .buck1_voltage[5] = 1100000, + .buck1_voltage[6] = 1000000, + .buck1_voltage[7] = 950000, + + .buck2_voltage[0] = 1100000, + .buck2_voltage[1] = 1100000, + .buck2_voltage[2] = 1100000, + .buck2_voltage[3] = 1100000, + .buck2_voltage[4] = 1000000, + .buck2_voltage[5] = 1000000, + .buck2_voltage[6] = 1000000, + .buck2_voltage[7] = 1000000, + + .buck5_voltage[0] = 1200000, + .buck5_voltage[1] = 1200000, + .buck5_voltage[2] = 1200000, + .buck5_voltage[3] = 1200000, + .buck5_voltage[4] = 1200000, + .buck5_voltage[5] = 1200000, + .buck5_voltage[6] = 1200000, + .buck5_voltage[7] = 1200000, +}; + +/* I2C0 */ +static struct i2c_board_info i2c0_devs[] __initdata = { + { + I2C_BOARD_INFO("max8997", (0xCC >> 1)), + .platform_data = &origen_max8997_pdata, + .irq = IRQ_EINT(4), + }, +}; + +static struct s3c_sdhci_platdata origen_hsmmc0_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_INTERNAL, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +}; + +static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_INTERNAL, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +}; + +/* USB EHCI */ +static struct s5p_ehci_platdata origen_ehci_pdata; + +static void __init origen_ehci_init(void) +{ + struct s5p_ehci_platdata *pdata = &origen_ehci_pdata; + + s5p_ehci_set_platdata(pdata); +} + +static struct gpio_keys_button origen_gpio_keys_table[] = { + { + .code = KEY_MENU, + .gpio = EXYNOS4_GPX1(5), + .desc = "gpio-keys: KEY_MENU", + .type = EV_KEY, + .active_low = 1, + .wakeup = 1, + .debounce_interval = 1, + }, { + .code = KEY_HOME, + .gpio = EXYNOS4_GPX1(6), + .desc = "gpio-keys: KEY_HOME", + .type = EV_KEY, + .active_low = 1, + .wakeup = 1, + .debounce_interval = 1, + }, { + .code = KEY_BACK, + .gpio = EXYNOS4_GPX1(7), + .desc = "gpio-keys: KEY_BACK", + .type = EV_KEY, + .active_low = 1, + .wakeup = 1, + .debounce_interval = 1, + }, { + .code = KEY_UP, + .gpio = EXYNOS4_GPX2(0), + .desc = "gpio-keys: KEY_UP", + .type = EV_KEY, + .active_low = 1, + .wakeup = 1, + .debounce_interval = 1, + }, { + .code = KEY_DOWN, + .gpio = EXYNOS4_GPX2(1), + .desc = "gpio-keys: KEY_DOWN", + .type = EV_KEY, + .active_low = 1, + .wakeup = 1, + .debounce_interval = 1, + }, +}; + +static struct gpio_keys_platform_data origen_gpio_keys_data = { + .buttons = origen_gpio_keys_table, + .nbuttons = ARRAY_SIZE(origen_gpio_keys_table), +}; + +static struct platform_device origen_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &origen_gpio_keys_data, + }, +}; + +static void lcd_hv070wsa_set_power(struct plat_lcd_data *pd, unsigned int power) +{ + int ret; + + if (power) + ret = gpio_request_one(EXYNOS4_GPE3(4), + GPIOF_OUT_INIT_HIGH, "GPE3_4"); + else + ret = gpio_request_one(EXYNOS4_GPE3(4), + GPIOF_OUT_INIT_LOW, "GPE3_4"); + + gpio_free(EXYNOS4_GPE3(4)); + + if (ret) + pr_err("failed to request gpio for LCD power: %d\n", ret); +} + +static struct plat_lcd_data origen_lcd_hv070wsa_data = { + .set_power = lcd_hv070wsa_set_power, +}; + +static struct platform_device origen_lcd_hv070wsa = { + .name = "platform-lcd", + .dev.parent = &s5p_device_fimd0.dev, + .dev.platform_data = &origen_lcd_hv070wsa_data, +}; + +static struct s3c_fb_pd_win origen_fb_win0 = { + .win_mode = { + .left_margin = 64, + .right_margin = 16, + .upper_margin = 64, + .lower_margin = 16, + .hsync_len = 48, + .vsync_len = 3, + .xres = 1024, + .yres = 600, + }, + .max_bpp = 32, + .default_bpp = 24, +}; + +static struct s3c_fb_platdata origen_lcd_pdata __initdata = { + .win[0] = &origen_fb_win0, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, + .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, +}; + +static struct platform_device *origen_devices[] __initdata = { + &s3c_device_hsmmc2, + &s3c_device_hsmmc0, + &s3c_device_i2c0, + &s3c_device_rtc, + &s3c_device_wdt, + &s5p_device_ehci, + &s5p_device_fimc0, + &s5p_device_fimc1, + &s5p_device_fimc2, + &s5p_device_fimc3, + &s5p_device_fimd0, + &s5p_device_hdmi, + &s5p_device_i2c_hdmiphy, + &s5p_device_mixer, + &exynos4_device_pd[PD_LCD0], + &exynos4_device_pd[PD_TV], + &origen_device_gpiokeys, + &origen_lcd_hv070wsa, +}; + +/* LCD Backlight data */ +static struct samsung_bl_gpio_info origen_bl_gpio_info = { + .no = EXYNOS4_GPD0(0), + .func = S3C_GPIO_SFN(2), +}; + +static struct platform_pwm_backlight_data origen_bl_data = { + .pwm_id = 0, + .pwm_period_ns = 1000, +}; + +static void s5p_tv_setup(void) +{ + /* Direct HPD to HDMI chip */ + gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug"); + s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3)); + s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE); +} + +static void __init origen_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(24000000); + s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs)); +} + +static void __init origen_power_init(void) +{ + gpio_request(EXYNOS4_GPX0(4), "PMIC_IRQ"); + s3c_gpio_cfgpin(EXYNOS4_GPX0(4), S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(EXYNOS4_GPX0(4), S3C_GPIO_PULL_NONE); +} + +static void __init origen_machine_init(void) +{ + origen_power_init(); + + s3c_i2c0_set_platdata(NULL); + i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs)); + + /* + * Since sdhci instance 2 can contain a bootable media, + * sdhci instance 0 is registered after instance 2. + */ + s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata); + s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata); + + origen_ehci_init(); + clk_xusbxti.rate = 24000000; + + s5p_tv_setup(); + s5p_i2c_hdmiphy_set_platdata(NULL); + + s5p_fimd0_set_platdata(&origen_lcd_pdata); + + platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices)); + s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev; + + s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev; + s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev; + + samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data); +} + +MACHINE_START(ORIGEN, "ORIGEN") + /* Maintainer: JeongHyeon Kim <jhkim@insignal.co.kr> */ + .atag_offset = 0x100, + .init_irq = exynos4_init_irq, + .map_io = origen_map_io, + .init_machine = origen_machine_init, + .timer = &exynos4_timer, +MACHINE_END diff --git a/arch/arm/mach-exynos4/mach-smdk4x12.c b/arch/arm/mach-exynos4/mach-smdk4x12.c new file mode 100644 index 00000000000..fcf2e0e23d5 --- /dev/null +++ b/arch/arm/mach-exynos4/mach-smdk4x12.c @@ -0,0 +1,302 @@ +/* + * linux/arch/arm/mach-exynos4/mach-smdk4x12.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/io.h> +#include <linux/mfd/max8997.h> +#include <linux/mmc/host.h> +#include <linux/platform_device.h> +#include <linux/pwm_backlight.h> +#include <linux/regulator/machine.h> +#include <linux/serial_core.h> + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <plat/backlight.h> +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/exynos4.h> +#include <plat/gpio-cfg.h> +#include <plat/iic.h> +#include <plat/keypad.h> +#include <plat/regs-serial.h> +#include <plat/sdhci.h> + +#include <mach/map.h> + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define SMDK4X12_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define SMDK4X12_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define SMDK4X12_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG4 | \ + S5PV210_UFCON_RXTRIG4) + +static struct s3c2410_uartcfg smdk4x12_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = SMDK4X12_UCON_DEFAULT, + .ulcon = SMDK4X12_ULCON_DEFAULT, + .ufcon = SMDK4X12_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = SMDK4X12_UCON_DEFAULT, + .ulcon = SMDK4X12_ULCON_DEFAULT, + .ufcon = SMDK4X12_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = SMDK4X12_UCON_DEFAULT, + .ulcon = SMDK4X12_ULCON_DEFAULT, + .ufcon = SMDK4X12_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = SMDK4X12_UCON_DEFAULT, + .ulcon = SMDK4X12_ULCON_DEFAULT, + .ufcon = SMDK4X12_UFCON_DEFAULT, + }, +}; + +static struct s3c_sdhci_platdata smdk4x12_hsmmc2_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_INTERNAL, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT + .max_width = 8, + .host_caps = MMC_CAP_8_BIT_DATA, +#endif +}; + +static struct s3c_sdhci_platdata smdk4x12_hsmmc3_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_INTERNAL, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +}; + +static struct regulator_consumer_supply max8997_buck1 = + REGULATOR_SUPPLY("vdd_arm", NULL); + +static struct regulator_consumer_supply max8997_buck2 = + REGULATOR_SUPPLY("vdd_int", NULL); + +static struct regulator_consumer_supply max8997_buck3 = + REGULATOR_SUPPLY("vdd_g3d", NULL); + +static struct regulator_init_data max8997_buck1_data = { + .constraints = { + .name = "VDD_ARM_SMDK4X12", + .min_uV = 925000, + .max_uV = 1350000, + .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &max8997_buck1, +}; + +static struct regulator_init_data max8997_buck2_data = { + .constraints = { + .name = "VDD_INT_SMDK4X12", + .min_uV = 950000, + .max_uV = 1150000, + .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &max8997_buck2, +}; + +static struct regulator_init_data max8997_buck3_data = { + .constraints = { + .name = "VDD_G3D_SMDK4X12", + .min_uV = 950000, + .max_uV = 1150000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &max8997_buck3, +}; + +static struct max8997_regulator_data smdk4x12_max8997_regulators[] = { + { MAX8997_BUCK1, &max8997_buck1_data }, + { MAX8997_BUCK2, &max8997_buck2_data }, + { MAX8997_BUCK3, &max8997_buck3_data }, +}; + +static struct max8997_platform_data smdk4x12_max8997_pdata = { + .num_regulators = ARRAY_SIZE(smdk4x12_max8997_regulators), + .regulators = smdk4x12_max8997_regulators, + + .buck1_voltage[0] = 1100000, /* 1.1V */ + .buck1_voltage[1] = 1100000, /* 1.1V */ + .buck1_voltage[2] = 1100000, /* 1.1V */ + .buck1_voltage[3] = 1100000, /* 1.1V */ + .buck1_voltage[4] = 1100000, /* 1.1V */ + .buck1_voltage[5] = 1100000, /* 1.1V */ + .buck1_voltage[6] = 1000000, /* 1.0V */ + .buck1_voltage[7] = 950000, /* 0.95V */ + + .buck2_voltage[0] = 1100000, /* 1.1V */ + .buck2_voltage[1] = 1000000, /* 1.0V */ + .buck2_voltage[2] = 950000, /* 0.95V */ + .buck2_voltage[3] = 900000, /* 0.9V */ + .buck2_voltage[4] = 1100000, /* 1.1V */ + .buck2_voltage[5] = 1000000, /* 1.0V */ + .buck2_voltage[6] = 950000, /* 0.95V */ + .buck2_voltage[7] = 900000, /* 0.9V */ + + .buck5_voltage[0] = 1100000, /* 1.1V */ + .buck5_voltage[1] = 1100000, /* 1.1V */ + .buck5_voltage[2] = 1100000, /* 1.1V */ + .buck5_voltage[3] = 1100000, /* 1.1V */ + .buck5_voltage[4] = 1100000, /* 1.1V */ + .buck5_voltage[5] = 1100000, /* 1.1V */ + .buck5_voltage[6] = 1100000, /* 1.1V */ + .buck5_voltage[7] = 1100000, /* 1.1V */ +}; + +static struct i2c_board_info smdk4x12_i2c_devs0[] __initdata = { + { + I2C_BOARD_INFO("max8997", 0x66), + .platform_data = &smdk4x12_max8997_pdata, + } +}; + +static struct i2c_board_info smdk4x12_i2c_devs1[] __initdata = { + { I2C_BOARD_INFO("wm8994", 0x1a), } +}; + +static struct i2c_board_info smdk4x12_i2c_devs3[] __initdata = { + /* nothing here yet */ +}; + +static struct i2c_board_info smdk4x12_i2c_devs7[] __initdata = { + /* nothing here yet */ +}; + +static struct samsung_bl_gpio_info smdk4x12_bl_gpio_info = { + .no = EXYNOS4_GPD0(1), + .func = S3C_GPIO_SFN(2), +}; + +static struct platform_pwm_backlight_data smdk4x12_bl_data = { + .pwm_id = 1, + .pwm_period_ns = 1000, +}; + +static uint32_t smdk4x12_keymap[] __initdata = { + /* KEY(row, col, keycode) */ + KEY(1, 0, KEY_D), KEY(1, 1, KEY_A), KEY(1, 2, KEY_B), + KEY(1, 3, KEY_E), KEY(1, 4, KEY_C) +}; + +static struct matrix_keymap_data smdk4x12_keymap_data __initdata = { + .keymap = smdk4x12_keymap, + .keymap_size = ARRAY_SIZE(smdk4x12_keymap), +}; + +static struct samsung_keypad_platdata smdk4x12_keypad_data __initdata = { + .keymap_data = &smdk4x12_keymap_data, + .rows = 2, + .cols = 5, +}; + +static struct platform_device *smdk4x12_devices[] __initdata = { + &s3c_device_hsmmc2, + &s3c_device_hsmmc3, + &s3c_device_i2c0, + &s3c_device_i2c1, + &s3c_device_i2c3, + &s3c_device_i2c7, + &s3c_device_rtc, + &s3c_device_wdt, + &samsung_device_keypad, +}; + +static void __init smdk4x12_map_io(void) +{ + clk_xusbxti.rate = 24000000; + + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(clk_xusbxti.rate); + s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs)); +} + +static void __init smdk4x12_machine_init(void) +{ + s3c_i2c0_set_platdata(NULL); + i2c_register_board_info(0, smdk4x12_i2c_devs0, + ARRAY_SIZE(smdk4x12_i2c_devs0)); + + s3c_i2c1_set_platdata(NULL); + i2c_register_board_info(1, smdk4x12_i2c_devs1, + ARRAY_SIZE(smdk4x12_i2c_devs1)); + + s3c_i2c3_set_platdata(NULL); + i2c_register_board_info(3, smdk4x12_i2c_devs3, + ARRAY_SIZE(smdk4x12_i2c_devs3)); + + s3c_i2c7_set_platdata(NULL); + i2c_register_board_info(7, smdk4x12_i2c_devs7, + ARRAY_SIZE(smdk4x12_i2c_devs7)); + + samsung_bl_set(&smdk4x12_bl_gpio_info, &smdk4x12_bl_data); + + samsung_keypad_set_platdata(&smdk4x12_keypad_data); + + s3c_sdhci2_set_platdata(&smdk4x12_hsmmc2_pdata); + s3c_sdhci3_set_platdata(&smdk4x12_hsmmc3_pdata); + + platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices)); +} + +MACHINE_START(SMDK4212, "SMDK4212") + /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ + .atag_offset = 0x100, + .init_irq = exynos4_init_irq, + .map_io = smdk4x12_map_io, + .init_machine = smdk4x12_machine_init, + .timer = &exynos4_timer, +MACHINE_END + +MACHINE_START(SMDK4412, "SMDK4412") + /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ + /* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */ + .atag_offset = 0x100, + .init_irq = exynos4_init_irq, + .map_io = smdk4x12_map_io, + .init_machine = smdk4x12_machine_init, + .timer = &exynos4_timer, +MACHINE_END diff --git a/arch/arm/mach-exynos4/mach-smdkc210.c b/arch/arm/mach-exynos4/mach-smdkc210.c deleted file mode 100644 index b24ddd7ad8f..00000000000 --- a/arch/arm/mach-exynos4/mach-smdkc210.c +++ /dev/null @@ -1,309 +0,0 @@ -/* linux/arch/arm/mach-exynos4/mach-smdkc210.c - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/serial_core.h> -#include <linux/delay.h> -#include <linux/gpio.h> -#include <linux/lcd.h> -#include <linux/mmc/host.h> -#include <linux/platform_device.h> -#include <linux/smsc911x.h> -#include <linux/io.h> -#include <linux/i2c.h> -#include <linux/pwm_backlight.h> - -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -#include <video/platform_lcd.h> - -#include <plat/regs-serial.h> -#include <plat/regs-srom.h> -#include <plat/regs-fb-v4.h> -#include <plat/exynos4.h> -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/fb.h> -#include <plat/sdhci.h> -#include <plat/iic.h> -#include <plat/pd.h> -#include <plat/gpio-cfg.h> -#include <plat/backlight.h> - -#include <mach/map.h> - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define SMDKC210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define SMDKC210_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define SMDKC210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG4 | \ - S5PV210_UFCON_RXTRIG4) - -static struct s3c2410_uartcfg smdkc210_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = SMDKC210_UCON_DEFAULT, - .ulcon = SMDKC210_ULCON_DEFAULT, - .ufcon = SMDKC210_UFCON_DEFAULT, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = SMDKC210_UCON_DEFAULT, - .ulcon = SMDKC210_ULCON_DEFAULT, - .ufcon = SMDKC210_UFCON_DEFAULT, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = SMDKC210_UCON_DEFAULT, - .ulcon = SMDKC210_ULCON_DEFAULT, - .ufcon = SMDKC210_UFCON_DEFAULT, - }, - [3] = { - .hwport = 3, - .flags = 0, - .ucon = SMDKC210_UCON_DEFAULT, - .ulcon = SMDKC210_ULCON_DEFAULT, - .ufcon = SMDKC210_UFCON_DEFAULT, - }, -}; - -static struct s3c_sdhci_platdata smdkc210_hsmmc0_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = EXYNOS4_GPK0(2), - .ext_cd_gpio_invert = 1, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, -#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT - .max_width = 8, - .host_caps = MMC_CAP_8_BIT_DATA, -#endif -}; - -static struct s3c_sdhci_platdata smdkc210_hsmmc1_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = EXYNOS4_GPK0(2), - .ext_cd_gpio_invert = 1, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, -}; - -static struct s3c_sdhci_platdata smdkc210_hsmmc2_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = EXYNOS4_GPK2(2), - .ext_cd_gpio_invert = 1, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, -#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT - .max_width = 8, - .host_caps = MMC_CAP_8_BIT_DATA, -#endif -}; - -static struct s3c_sdhci_platdata smdkc210_hsmmc3_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = EXYNOS4_GPK2(2), - .ext_cd_gpio_invert = 1, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, -}; - -static void lcd_lte480wv_set_power(struct plat_lcd_data *pd, - unsigned int power) -{ - if (power) { -#if !defined(CONFIG_BACKLIGHT_PWM) - gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0"); - gpio_free(EXYNOS4_GPD0(1)); -#endif - /* fire nRESET on power up */ - gpio_request(EXYNOS4_GPX0(6), "GPX0"); - - gpio_direction_output(EXYNOS4_GPX0(6), 1); - mdelay(100); - - gpio_set_value(EXYNOS4_GPX0(6), 0); - mdelay(10); - - gpio_set_value(EXYNOS4_GPX0(6), 1); - mdelay(10); - - gpio_free(EXYNOS4_GPX0(6)); - } else { -#if !defined(CONFIG_BACKLIGHT_PWM) - gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0"); - gpio_free(EXYNOS4_GPD0(1)); -#endif - } -} - -static struct plat_lcd_data smdkc210_lcd_lte480wv_data = { - .set_power = lcd_lte480wv_set_power, -}; - -static struct platform_device smdkc210_lcd_lte480wv = { - .name = "platform-lcd", - .dev.parent = &s5p_device_fimd0.dev, - .dev.platform_data = &smdkc210_lcd_lte480wv_data, -}; - -static struct s3c_fb_pd_win smdkc210_fb_win0 = { - .win_mode = { - .left_margin = 13, - .right_margin = 8, - .upper_margin = 7, - .lower_margin = 5, - .hsync_len = 3, - .vsync_len = 1, - .xres = 800, - .yres = 480, - }, - .max_bpp = 32, - .default_bpp = 24, -}; - -static struct s3c_fb_platdata smdkc210_lcd0_pdata __initdata = { - .win[0] = &smdkc210_fb_win0, - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, - .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, -}; - -static struct resource smdkc210_smsc911x_resources[] = { - [0] = { - .start = EXYNOS4_PA_SROM_BANK(1), - .end = EXYNOS4_PA_SROM_BANK(1) + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_EINT(5), - .end = IRQ_EINT(5), - .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, - }, -}; - -static struct smsc911x_platform_config smsc9215_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, - .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY, - .phy_interface = PHY_INTERFACE_MODE_MII, - .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67}, -}; - -static struct platform_device smdkc210_smsc911x = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(smdkc210_smsc911x_resources), - .resource = smdkc210_smsc911x_resources, - .dev = { - .platform_data = &smsc9215_config, - }, -}; - -static struct i2c_board_info i2c_devs1[] __initdata = { - {I2C_BOARD_INFO("wm8994", 0x1a),}, -}; - -static struct platform_device *smdkc210_devices[] __initdata = { - &s3c_device_hsmmc0, - &s3c_device_hsmmc1, - &s3c_device_hsmmc2, - &s3c_device_hsmmc3, - &s3c_device_i2c1, - &s3c_device_rtc, - &s3c_device_wdt, - &exynos4_device_ac97, - &exynos4_device_i2s0, - &exynos4_device_pd[PD_MFC], - &exynos4_device_pd[PD_G3D], - &exynos4_device_pd[PD_LCD0], - &exynos4_device_pd[PD_LCD1], - &exynos4_device_pd[PD_CAM], - &exynos4_device_pd[PD_TV], - &exynos4_device_pd[PD_GPS], - &exynos4_device_sysmmu, - &samsung_asoc_dma, - &s5p_device_fimd0, - &smdkc210_lcd_lte480wv, - &smdkc210_smsc911x, -}; - -static void __init smdkc210_smsc911x_init(void) -{ - u32 cs1; - - /* configure nCS1 width to 16 bits */ - cs1 = __raw_readl(S5P_SROM_BW) & - ~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT); - cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) | - (1 << S5P_SROM_BW__WAITENABLE__SHIFT) | - (1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) << - S5P_SROM_BW__NCS1__SHIFT; - __raw_writel(cs1, S5P_SROM_BW); - - /* set timing for nCS1 suitable for ethernet chip */ - __raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) | - (0x9 << S5P_SROM_BCX__TACP__SHIFT) | - (0xc << S5P_SROM_BCX__TCAH__SHIFT) | - (0x1 << S5P_SROM_BCX__TCOH__SHIFT) | - (0x6 << S5P_SROM_BCX__TACC__SHIFT) | - (0x1 << S5P_SROM_BCX__TCOS__SHIFT) | - (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1); -} - -/* LCD Backlight data */ -static struct samsung_bl_gpio_info smdkc210_bl_gpio_info = { - .no = EXYNOS4_GPD0(1), - .func = S3C_GPIO_SFN(2), -}; - -static struct platform_pwm_backlight_data smdkc210_bl_data = { - .pwm_id = 1, - .pwm_period_ns = 1000, -}; - -static void __init smdkc210_map_io(void) -{ - s5p_init_io(NULL, 0, S5P_VA_CHIPID); - s3c24xx_init_clocks(24000000); - s3c24xx_init_uarts(smdkc210_uartcfgs, ARRAY_SIZE(smdkc210_uartcfgs)); -} - -static void __init smdkc210_machine_init(void) -{ - s3c_i2c1_set_platdata(NULL); - i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); - - smdkc210_smsc911x_init(); - - s3c_sdhci0_set_platdata(&smdkc210_hsmmc0_pdata); - s3c_sdhci1_set_platdata(&smdkc210_hsmmc1_pdata); - s3c_sdhci2_set_platdata(&smdkc210_hsmmc2_pdata); - s3c_sdhci3_set_platdata(&smdkc210_hsmmc3_pdata); - - samsung_bl_set(&smdkc210_bl_gpio_info, &smdkc210_bl_data); - s5p_fimd0_set_platdata(&smdkc210_lcd0_pdata); - - platform_add_devices(smdkc210_devices, ARRAY_SIZE(smdkc210_devices)); -} - -MACHINE_START(SMDKC210, "SMDKC210") - /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .atag_offset = 0x100, - .init_irq = exynos4_init_irq, - .map_io = smdkc210_map_io, - .init_machine = smdkc210_machine_init, - .timer = &exynos4_timer, -MACHINE_END diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c index d90fcddbee1..cec2afabe7b 100644 --- a/arch/arm/mach-exynos4/mach-smdkv310.c +++ b/arch/arm/mach-exynos4/mach-smdkv310.c @@ -9,7 +9,9 @@ */ #include <linux/serial_core.h> +#include <linux/delay.h> #include <linux/gpio.h> +#include <linux/lcd.h> #include <linux/mmc/host.h> #include <linux/platform_device.h> #include <linux/smsc911x.h> @@ -21,17 +23,23 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> +#include <video/platform_lcd.h> #include <plat/regs-serial.h> #include <plat/regs-srom.h> +#include <plat/regs-fb-v4.h> #include <plat/exynos4.h> #include <plat/cpu.h> #include <plat/devs.h> +#include <plat/fb.h> #include <plat/keypad.h> #include <plat/sdhci.h> #include <plat/iic.h> #include <plat/pd.h> #include <plat/gpio-cfg.h> #include <plat/backlight.h> +#include <plat/mfc.h> +#include <plat/ehci.h> +#include <plat/clock.h> #include <mach/map.h> @@ -112,6 +120,67 @@ static struct s3c_sdhci_platdata smdkv310_hsmmc3_pdata __initdata = { .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; +static void lcd_lte480wv_set_power(struct plat_lcd_data *pd, + unsigned int power) +{ + if (power) { +#if !defined(CONFIG_BACKLIGHT_PWM) + gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0"); + gpio_free(EXYNOS4_GPD0(1)); +#endif + /* fire nRESET on power up */ + gpio_request(EXYNOS4_GPX0(6), "GPX0"); + + gpio_direction_output(EXYNOS4_GPX0(6), 1); + mdelay(100); + + gpio_set_value(EXYNOS4_GPX0(6), 0); + mdelay(10); + + gpio_set_value(EXYNOS4_GPX0(6), 1); + mdelay(10); + + gpio_free(EXYNOS4_GPX0(6)); + } else { +#if !defined(CONFIG_BACKLIGHT_PWM) + gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0"); + gpio_free(EXYNOS4_GPD0(1)); +#endif + } +} + +static struct plat_lcd_data smdkv310_lcd_lte480wv_data = { + .set_power = lcd_lte480wv_set_power, +}; + +static struct platform_device smdkv310_lcd_lte480wv = { + .name = "platform-lcd", + .dev.parent = &s5p_device_fimd0.dev, + .dev.platform_data = &smdkv310_lcd_lte480wv_data, +}; + +static struct s3c_fb_pd_win smdkv310_fb_win0 = { + .win_mode = { + .left_margin = 13, + .right_margin = 8, + .upper_margin = 7, + .lower_margin = 5, + .hsync_len = 3, + .vsync_len = 1, + .xres = 800, + .yres = 480, + }, + .max_bpp = 32, + .default_bpp = 24, +}; + +static struct s3c_fb_platdata smdkv310_lcd0_pdata __initdata = { + .win[0] = &smdkv310_fb_win0, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, + .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, +}; + static struct resource smdkv310_smsc911x_resources[] = { [0] = { .start = EXYNOS4_PA_SROM_BANK(1), @@ -166,17 +235,36 @@ static struct i2c_board_info i2c_devs1[] __initdata = { {I2C_BOARD_INFO("wm8994", 0x1a),}, }; +/* USB EHCI */ +static struct s5p_ehci_platdata smdkv310_ehci_pdata; + +static void __init smdkv310_ehci_init(void) +{ + struct s5p_ehci_platdata *pdata = &smdkv310_ehci_pdata; + + s5p_ehci_set_platdata(pdata); +} + static struct platform_device *smdkv310_devices[] __initdata = { &s3c_device_hsmmc0, &s3c_device_hsmmc1, &s3c_device_hsmmc2, &s3c_device_hsmmc3, &s3c_device_i2c1, + &s5p_device_i2c_hdmiphy, &s3c_device_rtc, &s3c_device_wdt, + &s5p_device_ehci, + &s5p_device_fimc0, + &s5p_device_fimc1, + &s5p_device_fimc2, + &s5p_device_fimc3, &exynos4_device_ac97, &exynos4_device_i2s0, &samsung_device_keypad, + &s5p_device_mfc, + &s5p_device_mfc_l, + &s5p_device_mfc_r, &exynos4_device_pd[PD_MFC], &exynos4_device_pd[PD_G3D], &exynos4_device_pd[PD_LCD0], @@ -188,8 +276,12 @@ static struct platform_device *smdkv310_devices[] __initdata = { &exynos4_device_sysmmu, &samsung_asoc_dma, &samsung_asoc_idma, + &s5p_device_fimd0, + &smdkv310_lcd_lte480wv, &smdkv310_smsc911x, &exynos4_device_ahci, + &s5p_device_hdmi, + &s5p_device_mixer, }; static void __init smdkv310_smsc911x_init(void) @@ -226,6 +318,18 @@ static struct platform_pwm_backlight_data smdkv310_bl_data = { .pwm_period_ns = 1000, }; +static void s5p_tv_setup(void) +{ + /* direct HPD to HDMI chip */ + WARN_ON(gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug")); + s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3)); + s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE); + + /* setup dependencies between TV devices */ + s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev; + s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev; +} + static void __init smdkv310_map_io(void) { s5p_init_io(NULL, 0, S5P_VA_CHIPID); @@ -233,6 +337,11 @@ static void __init smdkv310_map_io(void) s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs)); } +static void __init smdkv310_reserve(void) +{ + s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); +} + static void __init smdkv310_machine_init(void) { s3c_i2c1_set_platdata(NULL); @@ -245,11 +354,19 @@ static void __init smdkv310_machine_init(void) s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata); s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata); + s5p_tv_setup(); + s5p_i2c_hdmiphy_set_platdata(NULL); + samsung_keypad_set_platdata(&smdkv310_keypad_data); samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data); + s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata); + + smdkv310_ehci_init(); + clk_xusbxti.rate = 24000000; platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices)); + s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev; } MACHINE_START(SMDKV310, "SMDKV310") @@ -260,4 +377,14 @@ MACHINE_START(SMDKV310, "SMDKV310") .map_io = smdkv310_map_io, .init_machine = smdkv310_machine_init, .timer = &exynos4_timer, + .reserve = &smdkv310_reserve, +MACHINE_END + +MACHINE_START(SMDKC210, "SMDKC210") + /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ + .atag_offset = 0x100, + .init_irq = exynos4_init_irq, + .map_io = smdkv310_map_io, + .init_machine = smdkv310_machine_init, + .timer = &exynos4_timer, MACHINE_END diff --git a/arch/arm/mach-exynos4/mach-universal_c210.c b/arch/arm/mach-exynos4/mach-universal_c210.c index d7ec84d586f..a2a177ff4b4 100644 --- a/arch/arm/mach-exynos4/mach-universal_c210.c +++ b/arch/arm/mach-exynos4/mach-universal_c210.c @@ -13,6 +13,7 @@ #include <linux/i2c.h> #include <linux/gpio_keys.h> #include <linux/gpio.h> +#include <linux/fb.h> #include <linux/mfd/max8998.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> @@ -31,12 +32,21 @@ #include <plat/devs.h> #include <plat/iic.h> #include <plat/gpio-cfg.h> +#include <plat/fb.h> #include <plat/mfc.h> #include <plat/sdhci.h> #include <plat/pd.h> +#include <plat/regs-fb-v4.h> +#include <plat/fimc-core.h> +#include <plat/camport.h> +#include <plat/mipi_csis.h> #include <mach/map.h> +#include <media/v4l2-mediabus.h> +#include <media/s5p_fimc.h> +#include <media/m5mols.h> + /* Following are default values for UCON, ULCON and UFCON UART registers */ #define UNIVERSAL_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ @@ -79,7 +89,7 @@ static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = { }; static struct regulator_consumer_supply max8952_consumer = - REGULATOR_SUPPLY("vddarm", NULL); + REGULATOR_SUPPLY("vdd_arm", NULL); static struct max8952_platform_data universal_max8952_pdata __initdata = { .gpio_vid0 = EXYNOS4_GPX0(3), @@ -105,11 +115,14 @@ static struct max8952_platform_data universal_max8952_pdata __initdata = { }; static struct regulator_consumer_supply lp3974_buck1_consumer = - REGULATOR_SUPPLY("vddint", NULL); + REGULATOR_SUPPLY("vdd_int", NULL); static struct regulator_consumer_supply lp3974_buck2_consumer = REGULATOR_SUPPLY("vddg3d", NULL); +static struct regulator_consumer_supply lp3974_buck3_consumer = + REGULATOR_SUPPLY("vdet", "s5p-sdo"); + static struct regulator_init_data lp3974_buck1_data = { .constraints = { .name = "VINT_1.1V", @@ -153,6 +166,8 @@ static struct regulator_init_data lp3974_buck3_data = { .enabled = 1, }, }, + .num_consumer_supplies = 1, + .consumer_supplies = &lp3974_buck3_consumer, }; static struct regulator_init_data lp3974_buck4_data = { @@ -181,6 +196,12 @@ static struct regulator_init_data lp3974_ldo2_data = { }, }; +static struct regulator_consumer_supply lp3974_ldo3_consumer[] = { + REGULATOR_SUPPLY("vdd", "exynos4-hdmi"), + REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"), + REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), +}; + static struct regulator_init_data lp3974_ldo3_data = { .constraints = { .name = "VUSB+MIPI_1.1V", @@ -192,6 +213,12 @@ static struct regulator_init_data lp3974_ldo3_data = { .disabled = 1, }, }, + .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo3_consumer), + .consumer_supplies = lp3974_ldo3_consumer, +}; + +static struct regulator_consumer_supply lp3974_ldo4_consumer[] = { + REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"), }; static struct regulator_init_data lp3974_ldo4_data = { @@ -205,6 +232,8 @@ static struct regulator_init_data lp3974_ldo4_data = { .disabled = 1, }, }, + .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo4_consumer), + .consumer_supplies = lp3974_ldo4_consumer, }; static struct regulator_init_data lp3974_ldo5_data = { @@ -233,6 +262,10 @@ static struct regulator_init_data lp3974_ldo6_data = { }, }; +static struct regulator_consumer_supply lp3974_ldo7_consumer[] = { + REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"), +}; + static struct regulator_init_data lp3974_ldo7_data = { .constraints = { .name = "VLCD+VMIPI_1.8V", @@ -244,6 +277,12 @@ static struct regulator_init_data lp3974_ldo7_data = { .disabled = 1, }, }, + .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo7_consumer), + .consumer_supplies = lp3974_ldo7_consumer, +}; + +static struct regulator_consumer_supply lp3974_ldo8_consumer[] = { + REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"), }; static struct regulator_init_data lp3974_ldo8_data = { @@ -257,6 +296,8 @@ static struct regulator_init_data lp3974_ldo8_data = { .disabled = 1, }, }, + .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo8_consumer), + .consumer_supplies = lp3974_ldo8_consumer, }; static struct regulator_init_data lp3974_ldo9_data = { @@ -286,6 +327,9 @@ static struct regulator_init_data lp3974_ldo10_data = { }, }; +static struct regulator_consumer_supply lp3974_ldo11_consumer = + REGULATOR_SUPPLY("dig_28", "0-001f"); + static struct regulator_init_data lp3974_ldo11_data = { .constraints = { .name = "CAM_AF_3.3V", @@ -297,6 +341,8 @@ static struct regulator_init_data lp3974_ldo11_data = { .disabled = 1, }, }, + .num_consumer_supplies = 1, + .consumer_supplies = &lp3974_ldo11_consumer, }; static struct regulator_init_data lp3974_ldo12_data = { @@ -325,6 +371,9 @@ static struct regulator_init_data lp3974_ldo13_data = { }, }; +static struct regulator_consumer_supply lp3974_ldo14_consumer = + REGULATOR_SUPPLY("dig_18", "0-001f"); + static struct regulator_init_data lp3974_ldo14_data = { .constraints = { .name = "CAM_I_HOST_1.8V", @@ -336,8 +385,14 @@ static struct regulator_init_data lp3974_ldo14_data = { .disabled = 1, }, }, + .num_consumer_supplies = 1, + .consumer_supplies = &lp3974_ldo14_consumer, }; + +static struct regulator_consumer_supply lp3974_ldo15_consumer = + REGULATOR_SUPPLY("dig_12", "0-001f"); + static struct regulator_init_data lp3974_ldo15_data = { .constraints = { .name = "CAM_S_DIG+FM33_CORE_1.2V", @@ -349,6 +404,12 @@ static struct regulator_init_data lp3974_ldo15_data = { .disabled = 1, }, }, + .num_consumer_supplies = 1, + .consumer_supplies = &lp3974_ldo15_consumer, +}; + +static struct regulator_consumer_supply lp3974_ldo16_consumer[] = { + REGULATOR_SUPPLY("a_sensor", "0-001f"), }; static struct regulator_init_data lp3974_ldo16_data = { @@ -362,6 +423,8 @@ static struct regulator_init_data lp3974_ldo16_data = { .disabled = 1, }, }, + .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo16_consumer), + .consumer_supplies = lp3974_ldo16_consumer, }; static struct regulator_init_data lp3974_ldo17_data = { @@ -472,6 +535,43 @@ static struct max8998_platform_data universal_lp3974_pdata = { .wakeup = true, }; + +enum fixed_regulator_id { + FIXED_REG_ID_MMC0, + FIXED_REG_ID_HDMI_5V, + FIXED_REG_ID_CAM_S_IF, + FIXED_REG_ID_CAM_I_CORE, + FIXED_REG_ID_CAM_VT_DIO, +}; + +static struct regulator_consumer_supply hdmi_fixed_consumer = + REGULATOR_SUPPLY("hdmi-en", "exynos4-hdmi"); + +static struct regulator_init_data hdmi_fixed_voltage_init_data = { + .constraints = { + .name = "HDMI_5V", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &hdmi_fixed_consumer, +}; + +static struct fixed_voltage_config hdmi_fixed_voltage_config = { + .supply_name = "HDMI_EN1", + .microvolts = 5000000, + .gpio = EXYNOS4_GPE0(1), + .enable_high = true, + .init_data = &hdmi_fixed_voltage_init_data, +}; + +static struct platform_device hdmi_fixed_voltage = { + .name = "reg-fixed-voltage", + .id = FIXED_REG_ID_HDMI_5V, + .dev = { + .platform_data = &hdmi_fixed_voltage_config, + }, +}; + /* GPIO I2C 5 (PMIC) */ static struct i2c_board_info i2c5_devs[] __initdata = { { @@ -573,6 +673,11 @@ static void __init universal_touchkey_init(void) gpio_direction_output(gpio, 1); } +static struct s3c2410_platform_i2c universal_i2c0_platdata __initdata = { + .frequency = 300 * 1000, + .sda_delay = 200, +}; + /* GPIO KEYS */ static struct gpio_keys_button universal_gpio_keys_tables[] = { { @@ -658,7 +763,7 @@ static struct fixed_voltage_config mmc0_fixed_voltage_config = { static struct platform_device mmc0_fixed_voltage = { .name = "reg-fixed-voltage", - .id = 0, + .id = FIXED_REG_ID_MMC0, .dev = { .platform_data = &mmc0_fixed_voltage_config, }, @@ -692,18 +797,165 @@ static void __init universal_sdhci_init(void) s3c_sdhci3_set_platdata(&universal_hsmmc3_data); } -/* I2C0 */ -static struct i2c_board_info i2c0_devs[] __initdata = { - /* Camera, To be updated */ -}; - /* I2C1 */ static struct i2c_board_info i2c1_devs[] __initdata = { /* Gyro, To be updated */ }; +/* Frame Buffer */ +static struct s3c_fb_pd_win universal_fb_win0 = { + .win_mode = { + .left_margin = 16, + .right_margin = 16, + .upper_margin = 2, + .lower_margin = 28, + .hsync_len = 2, + .vsync_len = 1, + .xres = 480, + .yres = 800, + .refresh = 55, + }, + .max_bpp = 32, + .default_bpp = 16, +}; + +static struct s3c_fb_platdata universal_lcd_pdata __initdata = { + .win[0] = &universal_fb_win0, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB | + VIDCON0_CLKSEL_LCD, + .vidcon1 = VIDCON1_INV_VCLK | VIDCON1_INV_VDEN + | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, + .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, +}; + +static struct regulator_consumer_supply cam_i_core_supply = + REGULATOR_SUPPLY("core", "0-001f"); + +static struct regulator_init_data cam_i_core_reg_init_data = { + .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS }, + .num_consumer_supplies = 1, + .consumer_supplies = &cam_i_core_supply, +}; + +static struct fixed_voltage_config cam_i_core_fixed_voltage_cfg = { + .supply_name = "CAM_I_CORE_1.2V", + .microvolts = 1200000, + .gpio = EXYNOS4_GPE2(2), /* CAM_8M_CORE_EN */ + .enable_high = 1, + .init_data = &cam_i_core_reg_init_data, +}; + +static struct platform_device cam_i_core_fixed_reg_dev = { + .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_I_CORE, + .dev = { .platform_data = &cam_i_core_fixed_voltage_cfg }, +}; + +static struct regulator_consumer_supply cam_s_if_supply = + REGULATOR_SUPPLY("d_sensor", "0-001f"); + +static struct regulator_init_data cam_s_if_reg_init_data = { + .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS }, + .num_consumer_supplies = 1, + .consumer_supplies = &cam_s_if_supply, +}; + +static struct fixed_voltage_config cam_s_if_fixed_voltage_cfg = { + .supply_name = "CAM_S_IF_1.8V", + .microvolts = 1800000, + .gpio = EXYNOS4_GPE3(0), /* CAM_PWR_EN1 */ + .enable_high = 1, + .init_data = &cam_s_if_reg_init_data, +}; + +static struct platform_device cam_s_if_fixed_reg_dev = { + .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_S_IF, + .dev = { .platform_data = &cam_s_if_fixed_voltage_cfg }, +}; + +static struct s5p_platform_mipi_csis mipi_csis_platdata = { + .clk_rate = 166000000UL, + .lanes = 2, + .alignment = 32, + .hs_settle = 12, + .phy_enable = s5p_csis_phy_enable, +}; + +#define GPIO_CAM_LEVEL_EN(n) EXYNOS4_GPE4(n + 3) +#define GPIO_CAM_8M_ISP_INT EXYNOS4_GPX1(5) /* XEINT_13 */ +#define GPIO_CAM_MEGA_nRST EXYNOS4_GPE2(5) + +static int m5mols_set_power(struct device *dev, int on) +{ + gpio_set_value(GPIO_CAM_LEVEL_EN(1), !on); + gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on); + return 0; +} + +static struct m5mols_platform_data m5mols_platdata = { + .gpio_reset = GPIO_CAM_MEGA_nRST, + .reset_polarity = 0, + .set_power = m5mols_set_power, +}; + +static struct i2c_board_info m5mols_board_info = { + I2C_BOARD_INFO("M5MOLS", 0x1F), + .platform_data = &m5mols_platdata, +}; + +static struct s5p_fimc_isp_info universal_camera_sensors[] = { + { + .mux_id = 0, + .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | + V4L2_MBUS_VSYNC_ACTIVE_LOW, + .bus_type = FIMC_MIPI_CSI2, + .board_info = &m5mols_board_info, + .i2c_bus_num = 0, + .clk_frequency = 21600000UL, + .csi_data_align = 32, + }, +}; + +static struct s5p_platform_fimc fimc_md_platdata = { + .isp_info = universal_camera_sensors, + .num_clients = ARRAY_SIZE(universal_camera_sensors), +}; + +static struct gpio universal_camera_gpios[] = { + { GPIO_CAM_LEVEL_EN(1), GPIOF_OUT_INIT_HIGH, "CAM_LVL_EN1" }, + { GPIO_CAM_LEVEL_EN(2), GPIOF_OUT_INIT_LOW, "CAM_LVL_EN2" }, + { GPIO_CAM_8M_ISP_INT, GPIOF_IN, "8M_ISP_INT" }, + { GPIO_CAM_MEGA_nRST, GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" }, +}; + +static void universal_camera_init(void) +{ + s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata), + &s5p_device_mipi_csis0); + s3c_set_platdata(&fimc_md_platdata, sizeof(fimc_md_platdata), + &s5p_device_fimc_md); + + if (gpio_request_array(universal_camera_gpios, + ARRAY_SIZE(universal_camera_gpios))) { + pr_err("%s: GPIO request failed\n", __func__); + return; + } + + if (!s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xf))) + m5mols_board_info.irq = gpio_to_irq(GPIO_CAM_8M_ISP_INT); + else + pr_err("Failed to configure 8M_ISP_INT GPIO\n"); + + /* Free GPIOs controlled directly by the sensor drivers. */ + gpio_free(GPIO_CAM_MEGA_nRST); + gpio_free(GPIO_CAM_8M_ISP_INT); + + if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A)) + pr_err("Camera port A setup failed\n"); +} + static struct platform_device *universal_devices[] __initdata = { /* Samsung Platform Devices */ + &s5p_device_mipi_csis0, &s5p_device_fimc0, &s5p_device_fimc1, &s5p_device_fimc2, @@ -712,17 +964,30 @@ static struct platform_device *universal_devices[] __initdata = { &s3c_device_hsmmc0, &s3c_device_hsmmc2, &s3c_device_hsmmc3, + &s3c_device_i2c0, &s3c_device_i2c3, &s3c_device_i2c5, + &s5p_device_i2c_hdmiphy, + &hdmi_fixed_voltage, + &exynos4_device_pd[PD_TV], + &s5p_device_hdmi, + &s5p_device_sdo, + &s5p_device_mixer, /* Universal Devices */ &i2c_gpio12, &universal_gpio_keys, &s5p_device_onenand, + &s5p_device_fimd0, &s5p_device_mfc, &s5p_device_mfc_l, &s5p_device_mfc_r, &exynos4_device_pd[PD_MFC], + &exynos4_device_pd[PD_LCD0], + &exynos4_device_pd[PD_CAM], + &cam_i_core_fixed_reg_dev, + &cam_s_if_fixed_reg_dev, + &s5p_device_fimc_md, }; static void __init universal_map_io(void) @@ -732,6 +997,20 @@ static void __init universal_map_io(void) s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); } +void s5p_tv_setup(void) +{ + /* direct HPD to HDMI chip */ + gpio_request(EXYNOS4_GPX3(7), "hpd-plug"); + + gpio_direction_input(EXYNOS4_GPX3(7)); + s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3)); + s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE); + + /* setup dependencies between TV devices */ + s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev; + s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev; +} + static void __init universal_reserve(void) { s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); @@ -740,8 +1019,9 @@ static void __init universal_reserve(void) static void __init universal_machine_init(void) { universal_sdhci_init(); + s5p_tv_setup(); - i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs)); + s3c_i2c0_set_platdata(&universal_i2c0_platdata); i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); universal_tsp_init(); @@ -749,15 +1029,28 @@ static void __init universal_machine_init(void) i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs)); s3c_i2c5_set_platdata(NULL); + s5p_i2c_hdmiphy_set_platdata(NULL); i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs)); + s5p_fimd0_set_platdata(&universal_lcd_pdata); + universal_touchkey_init(); i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs, ARRAY_SIZE(i2c_gpio12_devs)); + universal_camera_init(); + /* Last */ platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices)); + s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev; + s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev; + + s5p_device_fimc0.dev.parent = &exynos4_device_pd[PD_CAM].dev; + s5p_device_fimc1.dev.parent = &exynos4_device_pd[PD_CAM].dev; + s5p_device_fimc2.dev.parent = &exynos4_device_pd[PD_CAM].dev; + s5p_device_fimc3.dev.parent = &exynos4_device_pd[PD_CAM].dev; + s5p_device_mipi_csis0.dev.parent = &exynos4_device_pd[PD_CAM].dev; } MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c index 1ae059b7ad7..eb182f29f48 100644 --- a/arch/arm/mach-exynos4/mct.c +++ b/arch/arm/mach-exynos4/mct.c @@ -20,19 +20,31 @@ #include <linux/delay.h> #include <linux/percpu.h> +#include <asm/hardware/gic.h> + +#include <plat/cpu.h> + #include <mach/map.h> +#include <mach/irqs.h> #include <mach/regs-mct.h> #include <asm/mach/time.h> +enum { + MCT_INT_SPI, + MCT_INT_PPI +}; + static unsigned long clk_cnt_per_tick; static unsigned long clk_rate; +static unsigned int mct_int_type; struct mct_clock_event_device { struct clock_event_device *evt; void __iomem *base; + char name[10]; }; -struct mct_clock_event_device mct_tick[2]; +struct mct_clock_event_device mct_tick[NR_CPUS]; static void exynos4_mct_write(unsigned int value, void *addr) { @@ -42,57 +54,53 @@ static void exynos4_mct_write(unsigned int value, void *addr) __raw_writel(value, addr); - switch ((u32) addr) { - case (u32) EXYNOS4_MCT_G_TCON: - stat_addr = EXYNOS4_MCT_G_WSTAT; - mask = 1 << 16; /* G_TCON write status */ - break; - case (u32) EXYNOS4_MCT_G_COMP0_L: - stat_addr = EXYNOS4_MCT_G_WSTAT; - mask = 1 << 0; /* G_COMP0_L write status */ - break; - case (u32) EXYNOS4_MCT_G_COMP0_U: - stat_addr = EXYNOS4_MCT_G_WSTAT; - mask = 1 << 1; /* G_COMP0_U write status */ - break; - case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR: - stat_addr = EXYNOS4_MCT_G_WSTAT; - mask = 1 << 2; /* G_COMP0_ADD_INCR write status */ - break; - case (u32) EXYNOS4_MCT_G_CNT_L: - stat_addr = EXYNOS4_MCT_G_CNT_WSTAT; - mask = 1 << 0; /* G_CNT_L write status */ - break; - case (u32) EXYNOS4_MCT_G_CNT_U: - stat_addr = EXYNOS4_MCT_G_CNT_WSTAT; - mask = 1 << 1; /* G_CNT_U write status */ - break; - case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_TCON_OFFSET): - stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET; - mask = 1 << 3; /* L0_TCON write status */ - break; - case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_TCON_OFFSET): - stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET; - mask = 1 << 3; /* L1_TCON write status */ - break; - case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_TCNTB_OFFSET): - stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET; - mask = 1 << 0; /* L0_TCNTB write status */ - break; - case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_TCNTB_OFFSET): - stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET; - mask = 1 << 0; /* L1_TCNTB write status */ - break; - case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_ICNTB_OFFSET): - stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET; - mask = 1 << 1; /* L0_ICNTB write status */ - break; - case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_ICNTB_OFFSET): - stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET; - mask = 1 << 1; /* L1_ICNTB write status */ - break; - default: - return; + if (likely(addr >= EXYNOS4_MCT_L_BASE(0))) { + u32 base = (u32) addr & EXYNOS4_MCT_L_MASK; + switch ((u32) addr & ~EXYNOS4_MCT_L_MASK) { + case (u32) MCT_L_TCON_OFFSET: + stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET; + mask = 1 << 3; /* L_TCON write status */ + break; + case (u32) MCT_L_ICNTB_OFFSET: + stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET; + mask = 1 << 1; /* L_ICNTB write status */ + break; + case (u32) MCT_L_TCNTB_OFFSET: + stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET; + mask = 1 << 0; /* L_TCNTB write status */ + break; + default: + return; + } + } else { + switch ((u32) addr) { + case (u32) EXYNOS4_MCT_G_TCON: + stat_addr = EXYNOS4_MCT_G_WSTAT; + mask = 1 << 16; /* G_TCON write status */ + break; + case (u32) EXYNOS4_MCT_G_COMP0_L: + stat_addr = EXYNOS4_MCT_G_WSTAT; + mask = 1 << 0; /* G_COMP0_L write status */ + break; + case (u32) EXYNOS4_MCT_G_COMP0_U: + stat_addr = EXYNOS4_MCT_G_WSTAT; + mask = 1 << 1; /* G_COMP0_U write status */ + break; + case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR: + stat_addr = EXYNOS4_MCT_G_WSTAT; + mask = 1 << 2; /* G_COMP0_ADD_INCR w status */ + break; + case (u32) EXYNOS4_MCT_G_CNT_L: + stat_addr = EXYNOS4_MCT_G_CNT_WSTAT; + mask = 1 << 0; /* G_CNT_L write status */ + break; + case (u32) EXYNOS4_MCT_G_CNT_U: + stat_addr = EXYNOS4_MCT_G_CNT_WSTAT; + mask = 1 << 1; /* G_CNT_U write status */ + break; + default: + return; + } } /* Wait maximum 1 ms until written values are applied */ @@ -132,12 +140,18 @@ static cycle_t exynos4_frc_read(struct clocksource *cs) return ((cycle_t)hi << 32) | lo; } +static void exynos4_frc_resume(struct clocksource *cs) +{ + exynos4_mct_frc_start(0, 0); +} + struct clocksource mct_frc = { .name = "mct-frc", .rating = 400, .read = exynos4_frc_read, .mask = CLOCKSOURCE_MASK(64), .flags = CLOCK_SOURCE_IS_CONTINUOUS, + .resume = exynos4_frc_resume, }; static void __init exynos4_clocksource_init(void) @@ -315,9 +329,8 @@ static inline void exynos4_tick_set_mode(enum clock_event_mode mode, } } -static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id) +static int exynos4_mct_tick_clear(struct mct_clock_event_device *mevt) { - struct mct_clock_event_device *mevt = dev_id; struct clock_event_device *evt = mevt->evt; /* @@ -329,7 +342,20 @@ static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id) exynos4_mct_tick_stop(mevt); /* Clear the MCT tick interrupt */ - exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET); + if (__raw_readl(mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) { + exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET); + return 1; + } else { + return 0; + } +} + +static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id) +{ + struct mct_clock_event_device *mevt = dev_id; + struct clock_event_device *evt = mevt->evt; + + exynos4_mct_tick_clear(mevt); evt->event_handler(evt); @@ -354,14 +380,10 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt) mct_tick[cpu].evt = evt; - if (cpu == 0) { - mct_tick[cpu].base = EXYNOS4_MCT_L0_BASE; - evt->name = "mct_tick0"; - } else { - mct_tick[cpu].base = EXYNOS4_MCT_L1_BASE; - evt->name = "mct_tick1"; - } + mct_tick[cpu].base = EXYNOS4_MCT_L_BASE(cpu); + sprintf(mct_tick[cpu].name, "mct_tick%d", cpu); + evt->name = mct_tick[cpu].name; evt->cpumask = cpumask_of(cpu); evt->set_next_event = exynos4_tick_set_next_event; evt->set_mode = exynos4_tick_set_mode; @@ -378,25 +400,34 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt) exynos4_mct_write(0x1, mct_tick[cpu].base + MCT_L_TCNTB_OFFSET); - if (cpu == 0) { - mct_tick0_event_irq.dev_id = &mct_tick[cpu]; - setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq); + if (mct_int_type == MCT_INT_SPI) { + if (cpu == 0) { + mct_tick0_event_irq.dev_id = &mct_tick[cpu]; + setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq); + } else { + mct_tick1_event_irq.dev_id = &mct_tick[cpu]; + setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq); + irq_set_affinity(IRQ_MCT_L1, cpumask_of(1)); + } } else { - mct_tick1_event_irq.dev_id = &mct_tick[cpu]; - setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq); - irq_set_affinity(IRQ_MCT_L1, cpumask_of(1)); + gic_enable_ppi(IRQ_MCT_LOCALTIMER); } } /* Setup the local clock events for a CPU */ -void __cpuinit local_timer_setup(struct clock_event_device *evt) +int __cpuinit local_timer_setup(struct clock_event_device *evt) { exynos4_mct_tick_init(evt); + + return 0; } int local_timer_ack(void) { - return 0; + unsigned int cpu = smp_processor_id(); + struct mct_clock_event_device *mevt = &mct_tick[cpu]; + + return exynos4_mct_tick_clear(mevt); } #endif /* CONFIG_LOCAL_TIMERS */ @@ -411,6 +442,11 @@ static void __init exynos4_timer_resources(void) static void __init exynos4_timer_init(void) { + if (soc_is_exynos4210()) + mct_int_type = MCT_INT_SPI; + else + mct_int_type = MCT_INT_PPI; + exynos4_timer_resources(); exynos4_clocksource_init(); exynos4_clockevent_init(); diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c index 7c2282c6ba8..d5f0f299ba0 100644 --- a/arch/arm/mach-exynos4/platsmp.c +++ b/arch/arm/mach-exynos4/platsmp.c @@ -30,9 +30,13 @@ #include <mach/regs-clock.h> #include <mach/regs-pmu.h> +#include <plat/cpu.h> + +extern unsigned int gic_bank_offset; extern void exynos4_secondary_startup(void); -#define CPU1_BOOT_REG S5P_VA_SYSRAM +#define CPU1_BOOT_REG (samsung_rev() == EXYNOS4210_REV_1_1 ? \ + S5P_INFORM5 : S5P_VA_SYSRAM) /* * control for which core is the next to come out of the secondary @@ -64,9 +68,9 @@ static DEFINE_SPINLOCK(boot_lock); static void __cpuinit exynos4_gic_secondary_init(void) { void __iomem *dist_base = S5P_VA_GIC_DIST + - (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id()); + (gic_bank_offset * smp_processor_id()); void __iomem *cpu_base = S5P_VA_GIC_CPU + - (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id()); + (gic_bank_offset * smp_processor_id()); int i; /* @@ -106,6 +110,8 @@ void __cpuinit platform_secondary_init(unsigned int cpu) */ spin_lock(&boot_lock); spin_unlock(&boot_lock); + + set_cpu_online(cpu, true); } int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) @@ -216,5 +222,6 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus) * until it receives a soft interrupt, and then the * secondary CPU branches to this address. */ - __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)), S5P_VA_SYSRAM); + __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)), + CPU1_BOOT_REG); } diff --git a/arch/arm/mach-exynos4/pm.c b/arch/arm/mach-exynos4/pm.c index bc6ca9482de..509a435afd4 100644 --- a/arch/arm/mach-exynos4/pm.c +++ b/arch/arm/mach-exynos4/pm.c @@ -41,7 +41,6 @@ static struct sleep_save exynos4_set_clksrc[] = { { .reg = S5P_CLKSRC_MASK_CAM , .val = 0x11111111, }, { .reg = S5P_CLKSRC_MASK_TV , .val = 0x00000111, }, { .reg = S5P_CLKSRC_MASK_LCD0 , .val = 0x00001111, }, - { .reg = S5P_CLKSRC_MASK_LCD1 , .val = 0x00001111, }, { .reg = S5P_CLKSRC_MASK_MAUDIO , .val = 0x00000001, }, { .reg = S5P_CLKSRC_MASK_FSYS , .val = 0x01011111, }, { .reg = S5P_CLKSRC_MASK_PERIL0 , .val = 0x01111111, }, @@ -49,6 +48,10 @@ static struct sleep_save exynos4_set_clksrc[] = { { .reg = S5P_CLKSRC_MASK_DMC , .val = 0x00010000, }, }; +static struct sleep_save exynos4210_set_clksrc[] = { + { .reg = S5P_CLKSRC_MASK_LCD1 , .val = 0x00001111, }, +}; + static struct sleep_save exynos4_epll_save[] = { SAVE_ITEM(S5P_EPLL_CON0), SAVE_ITEM(S5P_EPLL_CON1), @@ -60,77 +63,6 @@ static struct sleep_save exynos4_vpll_save[] = { }; static struct sleep_save exynos4_core_save[] = { - /* CMU side */ - SAVE_ITEM(S5P_CLKDIV_LEFTBUS), - SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS), - SAVE_ITEM(S5P_CLKDIV_RIGHTBUS), - SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS), - SAVE_ITEM(S5P_CLKSRC_TOP0), - SAVE_ITEM(S5P_CLKSRC_TOP1), - SAVE_ITEM(S5P_CLKSRC_CAM), - SAVE_ITEM(S5P_CLKSRC_TV), - SAVE_ITEM(S5P_CLKSRC_MFC), - SAVE_ITEM(S5P_CLKSRC_G3D), - SAVE_ITEM(S5P_CLKSRC_IMAGE), - SAVE_ITEM(S5P_CLKSRC_LCD0), - SAVE_ITEM(S5P_CLKSRC_LCD1), - SAVE_ITEM(S5P_CLKSRC_MAUDIO), - SAVE_ITEM(S5P_CLKSRC_FSYS), - SAVE_ITEM(S5P_CLKSRC_PERIL0), - SAVE_ITEM(S5P_CLKSRC_PERIL1), - SAVE_ITEM(S5P_CLKDIV_CAM), - SAVE_ITEM(S5P_CLKDIV_TV), - SAVE_ITEM(S5P_CLKDIV_MFC), - SAVE_ITEM(S5P_CLKDIV_G3D), - SAVE_ITEM(S5P_CLKDIV_IMAGE), - SAVE_ITEM(S5P_CLKDIV_LCD0), - SAVE_ITEM(S5P_CLKDIV_LCD1), - SAVE_ITEM(S5P_CLKDIV_MAUDIO), - SAVE_ITEM(S5P_CLKDIV_FSYS0), - SAVE_ITEM(S5P_CLKDIV_FSYS1), - SAVE_ITEM(S5P_CLKDIV_FSYS2), - SAVE_ITEM(S5P_CLKDIV_FSYS3), - SAVE_ITEM(S5P_CLKDIV_PERIL0), - SAVE_ITEM(S5P_CLKDIV_PERIL1), - SAVE_ITEM(S5P_CLKDIV_PERIL2), - SAVE_ITEM(S5P_CLKDIV_PERIL3), - SAVE_ITEM(S5P_CLKDIV_PERIL4), - SAVE_ITEM(S5P_CLKDIV_PERIL5), - SAVE_ITEM(S5P_CLKDIV_TOP), - SAVE_ITEM(S5P_CLKSRC_MASK_TOP), - SAVE_ITEM(S5P_CLKSRC_MASK_CAM), - SAVE_ITEM(S5P_CLKSRC_MASK_TV), - SAVE_ITEM(S5P_CLKSRC_MASK_LCD0), - SAVE_ITEM(S5P_CLKSRC_MASK_LCD1), - SAVE_ITEM(S5P_CLKSRC_MASK_MAUDIO), - SAVE_ITEM(S5P_CLKSRC_MASK_FSYS), - SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0), - SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1), - SAVE_ITEM(S5P_CLKDIV2_RATIO), - SAVE_ITEM(S5P_CLKGATE_SCLKCAM), - SAVE_ITEM(S5P_CLKGATE_IP_CAM), - SAVE_ITEM(S5P_CLKGATE_IP_TV), - SAVE_ITEM(S5P_CLKGATE_IP_MFC), - SAVE_ITEM(S5P_CLKGATE_IP_G3D), - SAVE_ITEM(S5P_CLKGATE_IP_IMAGE), - SAVE_ITEM(S5P_CLKGATE_IP_LCD0), - SAVE_ITEM(S5P_CLKGATE_IP_LCD1), - SAVE_ITEM(S5P_CLKGATE_IP_FSYS), - SAVE_ITEM(S5P_CLKGATE_IP_GPS), - SAVE_ITEM(S5P_CLKGATE_IP_PERIL), - SAVE_ITEM(S5P_CLKGATE_IP_PERIR), - SAVE_ITEM(S5P_CLKGATE_BLOCK), - SAVE_ITEM(S5P_CLKSRC_MASK_DMC), - SAVE_ITEM(S5P_CLKSRC_DMC), - SAVE_ITEM(S5P_CLKDIV_DMC0), - SAVE_ITEM(S5P_CLKDIV_DMC1), - SAVE_ITEM(S5P_CLKGATE_IP_DMC), - SAVE_ITEM(S5P_CLKSRC_CPU), - SAVE_ITEM(S5P_CLKDIV_CPU), - SAVE_ITEM(S5P_CLKDIV_CPU + 0x4), - SAVE_ITEM(S5P_CLKGATE_SCLKCPU), - SAVE_ITEM(S5P_CLKGATE_IP_CPU), - /* GIC side */ SAVE_ITEM(S5P_VA_GIC_CPU + 0x000), SAVE_ITEM(S5P_VA_GIC_CPU + 0x004), @@ -268,6 +200,9 @@ static void exynos4_pm_prepare(void) s3c_pm_do_restore_core(exynos4_set_clksrc, ARRAY_SIZE(exynos4_set_clksrc)); + if (soc_is_exynos4210()) + s3c_pm_do_restore_core(exynos4210_set_clksrc, ARRAY_SIZE(exynos4210_set_clksrc)); + } static int exynos4_pm_add(struct sys_device *sysdev) @@ -404,6 +339,13 @@ static int exynos4_pm_suspend(void) tmp &= ~S5P_CENTRAL_LOWPWR_CFG; __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION); + if (soc_is_exynos4212()) { + tmp = __raw_readl(S5P_CENTRAL_SEQ_OPTION); + tmp &= ~(S5P_USE_STANDBYWFI_ISP_ARM | + S5P_USE_STANDBYWFE_ISP_ARM); + __raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION); + } + /* Save Power control register */ asm ("mrc p15, 0, %0, c15, c0, 0" : "=r" (tmp) : : "cc"); diff --git a/arch/arm/mach-exynos4/pmu.c b/arch/arm/mach-exynos4/pmu.c index 7ea9eb2a20d..bba48f5c3e8 100644 --- a/arch/arm/mach-exynos4/pmu.c +++ b/arch/arm/mach-exynos4/pmu.c @@ -16,160 +16,215 @@ #include <mach/regs-clock.h> #include <mach/pmu.h> -static void __iomem *sys_powerdown_reg[] = { - S5P_ARM_CORE0_LOWPWR, - S5P_DIS_IRQ_CORE0, - S5P_DIS_IRQ_CENTRAL0, - S5P_ARM_CORE1_LOWPWR, - S5P_DIS_IRQ_CORE1, - S5P_DIS_IRQ_CENTRAL1, - S5P_ARM_COMMON_LOWPWR, - S5P_L2_0_LOWPWR, - S5P_L2_1_LOWPWR, - S5P_CMU_ACLKSTOP_LOWPWR, - S5P_CMU_SCLKSTOP_LOWPWR, - S5P_CMU_RESET_LOWPWR, - S5P_APLL_SYSCLK_LOWPWR, - S5P_MPLL_SYSCLK_LOWPWR, - S5P_VPLL_SYSCLK_LOWPWR, - S5P_EPLL_SYSCLK_LOWPWR, - S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR, - S5P_CMU_RESET_GPSALIVE_LOWPWR, - S5P_CMU_CLKSTOP_CAM_LOWPWR, - S5P_CMU_CLKSTOP_TV_LOWPWR, - S5P_CMU_CLKSTOP_MFC_LOWPWR, - S5P_CMU_CLKSTOP_G3D_LOWPWR, - S5P_CMU_CLKSTOP_LCD0_LOWPWR, - S5P_CMU_CLKSTOP_LCD1_LOWPWR, - S5P_CMU_CLKSTOP_MAUDIO_LOWPWR, - S5P_CMU_CLKSTOP_GPS_LOWPWR, - S5P_CMU_RESET_CAM_LOWPWR, - S5P_CMU_RESET_TV_LOWPWR, - S5P_CMU_RESET_MFC_LOWPWR, - S5P_CMU_RESET_G3D_LOWPWR, - S5P_CMU_RESET_LCD0_LOWPWR, - S5P_CMU_RESET_LCD1_LOWPWR, - S5P_CMU_RESET_MAUDIO_LOWPWR, - S5P_CMU_RESET_GPS_LOWPWR, - S5P_TOP_BUS_LOWPWR, - S5P_TOP_RETENTION_LOWPWR, - S5P_TOP_PWR_LOWPWR, - S5P_LOGIC_RESET_LOWPWR, - S5P_ONENAND_MEM_LOWPWR, - S5P_MODIMIF_MEM_LOWPWR, - S5P_G2D_ACP_MEM_LOWPWR, - S5P_USBOTG_MEM_LOWPWR, - S5P_HSMMC_MEM_LOWPWR, - S5P_CSSYS_MEM_LOWPWR, - S5P_SECSS_MEM_LOWPWR, - S5P_PCIE_MEM_LOWPWR, - S5P_SATA_MEM_LOWPWR, - S5P_PAD_RETENTION_DRAM_LOWPWR, - S5P_PAD_RETENTION_MAUDIO_LOWPWR, - S5P_PAD_RETENTION_GPIO_LOWPWR, - S5P_PAD_RETENTION_UART_LOWPWR, - S5P_PAD_RETENTION_MMCA_LOWPWR, - S5P_PAD_RETENTION_MMCB_LOWPWR, - S5P_PAD_RETENTION_EBIA_LOWPWR, - S5P_PAD_RETENTION_EBIB_LOWPWR, - S5P_PAD_RETENTION_ISOLATION_LOWPWR, - S5P_PAD_RETENTION_ALV_SEL_LOWPWR, - S5P_XUSBXTI_LOWPWR, - S5P_XXTI_LOWPWR, - S5P_EXT_REGULATOR_LOWPWR, - S5P_GPIO_MODE_LOWPWR, - S5P_GPIO_MODE_MAUDIO_LOWPWR, - S5P_CAM_LOWPWR, - S5P_TV_LOWPWR, - S5P_MFC_LOWPWR, - S5P_G3D_LOWPWR, - S5P_LCD0_LOWPWR, - S5P_LCD1_LOWPWR, - S5P_MAUDIO_LOWPWR, - S5P_GPS_LOWPWR, - S5P_GPS_ALIVE_LOWPWR, +static struct exynos4_pmu_conf *exynos4_pmu_config; + +static struct exynos4_pmu_conf exynos4210_pmu_config[] = { + /* { .reg = address, .val = { AFTR, LPA, SLEEP } */ + { S5P_ARM_CORE0_LOWPWR, { 0x0, 0x0, 0x2 } }, + { S5P_DIS_IRQ_CORE0, { 0x0, 0x0, 0x0 } }, + { S5P_DIS_IRQ_CENTRAL0, { 0x0, 0x0, 0x0 } }, + { S5P_ARM_CORE1_LOWPWR, { 0x0, 0x0, 0x2 } }, + { S5P_DIS_IRQ_CORE1, { 0x0, 0x0, 0x0 } }, + { S5P_DIS_IRQ_CENTRAL1, { 0x0, 0x0, 0x0 } }, + { S5P_ARM_COMMON_LOWPWR, { 0x0, 0x0, 0x2 } }, + { S5P_L2_0_LOWPWR, { 0x2, 0x2, 0x3 } }, + { S5P_L2_1_LOWPWR, { 0x2, 0x2, 0x3 } }, + { S5P_CMU_ACLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_SCLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_RESET_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_APLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_MPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_VPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_EPLL_SYSCLK_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_RESET_GPSALIVE_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_CLKSTOP_CAM_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_CLKSTOP_TV_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_CLKSTOP_MFC_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_CLKSTOP_G3D_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_CLKSTOP_LCD0_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_CLKSTOP_LCD1_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_CLKSTOP_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_CLKSTOP_GPS_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_RESET_CAM_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_RESET_TV_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_RESET_MFC_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_RESET_G3D_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_RESET_LCD0_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_RESET_LCD1_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_RESET_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_RESET_GPS_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_TOP_BUS_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_TOP_RETENTION_LOWPWR, { 0x1, 0x0, 0x1 } }, + { S5P_TOP_PWR_LOWPWR, { 0x3, 0x0, 0x3 } }, + { S5P_LOGIC_RESET_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_ONENAND_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_MODIMIF_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_G2D_ACP_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_USBOTG_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_HSMMC_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_CSSYS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_SECSS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_PCIE_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_SATA_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_DRAM_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_PAD_RETENTION_GPIO_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_UART_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_MMCA_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_MMCB_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_EBIA_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_EBIB_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_ISOLATION_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_ALV_SEL_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_XUSBXTI_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_XXTI_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_EXT_REGULATOR_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_GPIO_MODE_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_GPIO_MODE_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CAM_LOWPWR, { 0x7, 0x0, 0x0 } }, + { S5P_TV_LOWPWR, { 0x7, 0x0, 0x0 } }, + { S5P_MFC_LOWPWR, { 0x7, 0x0, 0x0 } }, + { S5P_G3D_LOWPWR, { 0x7, 0x0, 0x0 } }, + { S5P_LCD0_LOWPWR, { 0x7, 0x0, 0x0 } }, + { S5P_LCD1_LOWPWR, { 0x7, 0x0, 0x0 } }, + { S5P_MAUDIO_LOWPWR, { 0x7, 0x7, 0x0 } }, + { S5P_GPS_LOWPWR, { 0x7, 0x0, 0x0 } }, + { S5P_GPS_ALIVE_LOWPWR, { 0x7, 0x0, 0x0 } }, + { PMU_TABLE_END,}, }; -static const unsigned int sys_powerdown_val[][NUM_SYS_POWERDOWN] = { - /* { AFTR, LPA, SLEEP }*/ - { 0, 0, 2 }, /* ARM_CORE0 */ - { 0, 0, 0 }, /* ARM_DIS_IRQ_CORE0 */ - { 0, 0, 0 }, /* ARM_DIS_IRQ_CENTRAL0 */ - { 0, 0, 2 }, /* ARM_CORE1 */ - { 0, 0, 0 }, /* ARM_DIS_IRQ_CORE1 */ - { 0, 0, 0 }, /* ARM_DIS_IRQ_CENTRAL1 */ - { 0, 0, 2 }, /* ARM_COMMON */ - { 2, 2, 3 }, /* ARM_CPU_L2_0 */ - { 2, 2, 3 }, /* ARM_CPU_L2_1 */ - { 1, 0, 0 }, /* CMU_ACLKSTOP */ - { 1, 0, 0 }, /* CMU_SCLKSTOP */ - { 1, 1, 0 }, /* CMU_RESET */ - { 1, 0, 0 }, /* APLL_SYSCLK */ - { 1, 0, 0 }, /* MPLL_SYSCLK */ - { 1, 0, 0 }, /* VPLL_SYSCLK */ - { 1, 1, 0 }, /* EPLL_SYSCLK */ - { 1, 1, 0 }, /* CMU_CLKSTOP_GPS_ALIVE */ - { 1, 1, 0 }, /* CMU_RESET_GPS_ALIVE */ - { 1, 1, 0 }, /* CMU_CLKSTOP_CAM */ - { 1, 1, 0 }, /* CMU_CLKSTOP_TV */ - { 1, 1, 0 }, /* CMU_CLKSTOP_MFC */ - { 1, 1, 0 }, /* CMU_CLKSTOP_G3D */ - { 1, 1, 0 }, /* CMU_CLKSTOP_LCD0 */ - { 1, 1, 0 }, /* CMU_CLKSTOP_LCD1 */ - { 1, 1, 0 }, /* CMU_CLKSTOP_MAUDIO */ - { 1, 1, 0 }, /* CMU_CLKSTOP_GPS */ - { 1, 1, 0 }, /* CMU_RESET_CAM */ - { 1, 1, 0 }, /* CMU_RESET_TV */ - { 1, 1, 0 }, /* CMU_RESET_MFC */ - { 1, 1, 0 }, /* CMU_RESET_G3D */ - { 1, 1, 0 }, /* CMU_RESET_LCD0 */ - { 1, 1, 0 }, /* CMU_RESET_LCD1 */ - { 1, 1, 0 }, /* CMU_RESET_MAUDIO */ - { 1, 1, 0 }, /* CMU_RESET_GPS */ - { 3, 0, 0 }, /* TOP_BUS */ - { 1, 0, 1 }, /* TOP_RETENTION */ - { 3, 0, 3 }, /* TOP_PWR */ - { 1, 1, 0 }, /* LOGIC_RESET */ - { 3, 0, 0 }, /* ONENAND_MEM */ - { 3, 0, 0 }, /* MODIMIF_MEM */ - { 3, 0, 0 }, /* G2D_ACP_MEM */ - { 3, 0, 0 }, /* USBOTG_MEM */ - { 3, 0, 0 }, /* HSMMC_MEM */ - { 3, 0, 0 }, /* CSSYS_MEM */ - { 3, 0, 0 }, /* SECSS_MEM */ - { 3, 0, 0 }, /* PCIE_MEM */ - { 3, 0, 0 }, /* SATA_MEM */ - { 1, 0, 0 }, /* PAD_RETENTION_DRAM */ - { 1, 1, 0 }, /* PAD_RETENTION_MAUDIO */ - { 1, 0, 0 }, /* PAD_RETENTION_GPIO */ - { 1, 0, 0 }, /* PAD_RETENTION_UART */ - { 1, 0, 0 }, /* PAD_RETENTION_MMCA */ - { 1, 0, 0 }, /* PAD_RETENTION_MMCB */ - { 1, 0, 0 }, /* PAD_RETENTION_EBIA */ - { 1, 0, 0 }, /* PAD_RETENTION_EBIB */ - { 1, 0, 0 }, /* PAD_RETENTION_ISOLATION */ - { 1, 0, 0 }, /* PAD_RETENTION_ALV_SEL */ - { 1, 1, 0 }, /* XUSBXTI */ - { 1, 1, 0 }, /* XXTI */ - { 1, 1, 0 }, /* EXT_REGULATOR */ - { 1, 0, 0 }, /* GPIO_MODE */ - { 1, 1, 0 }, /* GPIO_MODE_MAUDIO */ - { 7, 0, 0 }, /* CAM */ - { 7, 0, 0 }, /* TV */ - { 7, 0, 0 }, /* MFC */ - { 7, 0, 0 }, /* G3D */ - { 7, 0, 0 }, /* LCD0 */ - { 7, 0, 0 }, /* LCD1 */ - { 7, 7, 0 }, /* MAUDIO */ - { 7, 0, 0 }, /* GPS */ - { 7, 0, 0 }, /* GPS_ALIVE */ +static struct exynos4_pmu_conf exynos4212_pmu_config[] = { + { S5P_ARM_CORE0_LOWPWR, { 0x0, 0x0, 0x2 } }, + { S5P_DIS_IRQ_CORE0, { 0x0, 0x0, 0x0 } }, + { S5P_DIS_IRQ_CENTRAL0, { 0x0, 0x0, 0x0 } }, + { S5P_ARM_CORE1_LOWPWR, { 0x0, 0x0, 0x2 } }, + { S5P_DIS_IRQ_CORE1, { 0x0, 0x0, 0x0 } }, + { S5P_DIS_IRQ_CENTRAL1, { 0x0, 0x0, 0x0 } }, + { S5P_ISP_ARM_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR, { 0x0, 0x0, 0x0 } }, + { S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR, { 0x0, 0x0, 0x0 } }, + { S5P_ARM_COMMON_LOWPWR, { 0x0, 0x0, 0x2 } }, + { S5P_L2_0_LOWPWR, { 0x0, 0x0, 0x3 } }, + /* XXX_OPTION register should be set other field */ + { S5P_ARM_L2_0_OPTION, { 0x10, 0x10, 0x0 } }, + { S5P_L2_1_LOWPWR, { 0x0, 0x0, 0x3 } }, + { S5P_ARM_L2_1_OPTION, { 0x10, 0x10, 0x0 } }, + { S5P_CMU_ACLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_SCLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_RESET_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_DRAM_FREQ_DOWN_LOWPWR, { 0x1, 0x1, 0x1 } }, + { S5P_DDRPHY_DLLOFF_LOWPWR, { 0x1, 0x1, 0x1 } }, + { S5P_LPDDR_PHY_DLL_LOCK_LOWPWR, { 0x1, 0x1, 0x1 } }, + { S5P_CMU_ACLKSTOP_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_SCLKSTOP_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_RESET_COREBLK_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_APLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_MPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_VPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_EPLL_SYSCLK_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_MPLLUSER_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_RESET_GPSALIVE_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_CLKSTOP_CAM_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_CLKSTOP_TV_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_CLKSTOP_MFC_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_CLKSTOP_G3D_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_CLKSTOP_LCD0_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_CLKSTOP_ISP_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_CLKSTOP_MAUDIO_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_CLKSTOP_GPS_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_RESET_CAM_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_RESET_TV_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_RESET_MFC_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_RESET_G3D_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_RESET_LCD0_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_RESET_ISP_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_RESET_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_RESET_GPS_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_TOP_BUS_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_TOP_RETENTION_LOWPWR, { 0x1, 0x0, 0x1 } }, + { S5P_TOP_PWR_LOWPWR, { 0x3, 0x0, 0x3 } }, + { S5P_TOP_BUS_COREBLK_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_TOP_RETENTION_COREBLK_LOWPWR, { 0x1, 0x0, 0x1 } }, + { S5P_TOP_PWR_COREBLK_LOWPWR, { 0x3, 0x0, 0x3 } }, + { S5P_LOGIC_RESET_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_OSCCLK_GATE_LOWPWR, { 0x1, 0x0, 0x1 } }, + { S5P_LOGIC_RESET_COREBLK_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_OSCCLK_GATE_COREBLK_LOWPWR, { 0x1, 0x0, 0x1 } }, + { S5P_ONENAND_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_ONENAND_MEM_OPTION, { 0x10, 0x10, 0x0 } }, + { S5P_HSI_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_HSI_MEM_OPTION, { 0x10, 0x10, 0x0 } }, + { S5P_G2D_ACP_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_G2D_ACP_MEM_OPTION, { 0x10, 0x10, 0x0 } }, + { S5P_USBOTG_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_USBOTG_MEM_OPTION, { 0x10, 0x10, 0x0 } }, + { S5P_HSMMC_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_HSMMC_MEM_OPTION, { 0x10, 0x10, 0x0 } }, + { S5P_CSSYS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_CSSYS_MEM_OPTION, { 0x10, 0x10, 0x0 } }, + { S5P_SECSS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_SECSS_MEM_OPTION, { 0x10, 0x10, 0x0 } }, + { S5P_ROTATOR_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_ROTATOR_MEM_OPTION, { 0x10, 0x10, 0x0 } }, + { S5P_PAD_RETENTION_DRAM_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_PAD_RETENTION_GPIO_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_UART_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_MMCA_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_MMCB_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_EBIA_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_EBIB_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR,{ 0x1, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_ISOLATION_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_PAD_ISOLATION_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_ALV_SEL_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_XUSBXTI_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_XXTI_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_EXT_REGULATOR_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_GPIO_MODE_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_GPIO_MODE_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_GPIO_MODE_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_TOP_ASB_RESET_LOWPWR, { 0x1, 0x1, 0x1 } }, + { S5P_TOP_ASB_ISOLATION_LOWPWR, { 0x1, 0x0, 0x1 } }, + { S5P_CAM_LOWPWR, { 0x7, 0x0, 0x0 } }, + { S5P_TV_LOWPWR, { 0x7, 0x0, 0x0 } }, + { S5P_MFC_LOWPWR, { 0x7, 0x0, 0x0 } }, + { S5P_G3D_LOWPWR, { 0x7, 0x0, 0x0 } }, + { S5P_LCD0_LOWPWR, { 0x7, 0x0, 0x0 } }, + { S5P_ISP_LOWPWR, { 0x7, 0x0, 0x0 } }, + { S5P_MAUDIO_LOWPWR, { 0x7, 0x7, 0x0 } }, + { S5P_GPS_LOWPWR, { 0x7, 0x0, 0x0 } }, + { S5P_GPS_ALIVE_LOWPWR, { 0x7, 0x0, 0x0 } }, + { S5P_CMU_SYSCLK_ISP_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_SYSCLK_GPS_LOWPWR, { 0x1, 0x0, 0x0 } }, + { PMU_TABLE_END,}, }; void exynos4_sys_powerdown_conf(enum sys_powerdown mode) { - unsigned int count = ARRAY_SIZE(sys_powerdown_reg); + unsigned int i; + + for (i = 0; (exynos4_pmu_config[i].reg != PMU_TABLE_END) ; i++) + __raw_writel(exynos4_pmu_config[i].val[mode], + exynos4_pmu_config[i].reg); +} + +static int __init exynos4_pmu_init(void) +{ + exynos4_pmu_config = exynos4210_pmu_config; + + if (soc_is_exynos4210()) { + exynos4_pmu_config = exynos4210_pmu_config; + pr_info("EXYNOS4210 PMU Initialize\n"); + } else if (soc_is_exynos4212()) { + exynos4_pmu_config = exynos4212_pmu_config; + pr_info("EXYNOS4212 PMU Initialize\n"); + } else { + pr_info("EXYNOS4: PMU not supported\n"); + } - for (; count > 0; count--) - __raw_writel(sys_powerdown_val[count - 1][mode], - sys_powerdown_reg[count - 1]); + return 0; } +arch_initcall(exynos4_pmu_init); diff --git a/arch/arm/mach-exynos4/setup-keypad.c b/arch/arm/mach-exynos4/setup-keypad.c index 1ee0ebff111..7862bfb5933 100644 --- a/arch/arm/mach-exynos4/setup-keypad.c +++ b/arch/arm/mach-exynos4/setup-keypad.c @@ -19,15 +19,16 @@ void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols) if (rows > 8) { /* Set all the necessary GPX2 pins: KP_ROW[0~7] */ - s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3)); + s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3), + S3C_GPIO_PULL_UP); /* Set all the necessary GPX3 pins: KP_ROW[8~] */ - s3c_gpio_cfgrange_nopull(EXYNOS4_GPX3(0), (rows - 8), - S3C_GPIO_SFN(3)); + s3c_gpio_cfgall_range(EXYNOS4_GPX3(0), (rows - 8), + S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); } else { /* Set all the necessary GPX2 pins: KP_ROW[x] */ - s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), rows, - S3C_GPIO_SFN(3)); + s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), rows, S3C_GPIO_SFN(3), + S3C_GPIO_PULL_UP); } /* Set all the necessary GPX1 pins to special-function 3: KP_COL[x] */ diff --git a/arch/arm/mach-exynos4/setup-sdhci.c b/arch/arm/mach-exynos4/setup-sdhci.c index 1e83f8cf236..92937b41090 100644 --- a/arch/arm/mach-exynos4/setup-sdhci.c +++ b/arch/arm/mach-exynos4/setup-sdhci.c @@ -10,16 +10,7 @@ * published by the Free Software Foundation. */ -#include <linux/kernel.h> #include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <linux/mmc/card.h> -#include <linux/mmc/host.h> - -#include <plat/regs-sdhci.h> /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ @@ -29,41 +20,3 @@ char *exynos4_hsmmc_clksrcs[4] = { [2] = "sclk_mmc", /* mmc_bus */ [3] = NULL, }; - -void exynos4_setup_sdhci_cfg_card(struct platform_device *dev, void __iomem *r, - struct mmc_ios *ios, struct mmc_card *card) -{ - u32 ctrl2, ctrl3; - - /* don't need to alter anything according to card-type */ - - ctrl2 = readl(r + S3C_SDHCI_CONTROL2); - - /* select base clock source to HCLK */ - - ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK; - - /* - * clear async mode, enable conflict mask, rx feedback ctrl, SD - * clk hold and no use debounce count - */ - - ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR | - S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK | - S3C_SDHCI_CTRL2_ENFBCLKRX | - S3C_SDHCI_CTRL2_DFCNT_NONE | - S3C_SDHCI_CTRL2_ENCLKOUTHOLD); - - /* Tx and Rx feedback clock delay control */ - - if (ios->clock < 25 * 1000000) - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 | - S3C_SDHCI_CTRL3_FCSEL2 | - S3C_SDHCI_CTRL3_FCSEL1 | - S3C_SDHCI_CTRL3_FCSEL0); - else - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0); - - writel(ctrl2, r + S3C_SDHCI_CONTROL2); - writel(ctrl3, r + S3C_SDHCI_CONTROL3); -} diff --git a/arch/arm/mach-exynos4/setup-usb-phy.c b/arch/arm/mach-exynos4/setup-usb-phy.c index 0883c1b824b..39aca045f66 100644 --- a/arch/arm/mach-exynos4/setup-usb-phy.c +++ b/arch/arm/mach-exynos4/setup-usb-phy.c @@ -82,7 +82,7 @@ static int exynos4_usb_phy1_init(struct platform_device *pdev) rstcon &= ~(HOST_LINK_PORT_SWRST_MASK | PHY1_SWRST_MASK); writel(rstcon, EXYNOS4_RSTCON); - udelay(50); + udelay(80); clk_disable(otg_clk); clk_put(otg_clk); diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig index dc26fff22cf..c8e7afcf14e 100644 --- a/arch/arm/mach-footbridge/Kconfig +++ b/arch/arm/mach-footbridge/Kconfig @@ -62,6 +62,7 @@ config ARCH_EBSA285_HOST config ARCH_NETWINDER bool "NetWinder" select CLKSRC_I8253 + select CLKEVT_I8253 select FOOTBRIDGE_HOST select ISA select ISA_DMA diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c index 1331fff51ae..18c32a5541d 100644 --- a/arch/arm/mach-footbridge/dc21285.c +++ b/arch/arm/mach-footbridge/dc21285.c @@ -18,6 +18,7 @@ #include <linux/irq.h> #include <linux/io.h> #include <linux/spinlock.h> +#include <video/vga.h> #include <asm/irq.h> #include <asm/system.h> diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index 881add0fbe5..b1ec2cf53bb 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -310,7 +310,7 @@ static struct sys_timer eukrea_cpuimx27_timer = { .init = eukrea_cpuimx27_timer_init, }; -MACHINE_START(CPUIMX27, "EUKREA CPUIMX27") +MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27") .atag_offset = 0x100, .map_io = mx27_map_io, .init_early = imx27_init_early, diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index 10b89139da4..470b654b0e6 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -192,7 +192,7 @@ struct sys_timer eukrea_cpuimx35_timer = { .init = eukrea_cpuimx35_timer_init, }; -MACHINE_START(EUKREA_CPUIMX35, "Eukrea CPUIMX35") +MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35") /* Maintainer: Eukrea Electromatique */ .atag_offset = 0x100, .map_io = mx35_map_io, diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c index d8699b54268..9163318e95a 100644 --- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c +++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c @@ -161,7 +161,7 @@ static struct sys_timer eukrea_cpuimx25_timer = { .init = eukrea_cpuimx25_timer_init, }; -MACHINE_START(EUKREA_CPUIMX25, "Eukrea CPUIMX25") +MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25") /* Maintainer: Eukrea Electromatique */ .atag_offset = 0x100, .map_io = mx25_map_io, diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index eaa95bdadca..a20fb3f2bc4 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -32,6 +32,7 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/mtd/physmap.h> +#include <video/vga.h> #include <mach/hardware.h> #include <mach/platform.h> @@ -154,6 +155,7 @@ static struct map_desc ap_io_desc[] __initdata = { static void __init ap_map_io(void) { iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc)); + vga_base = PCI_MEMORY_VADDR; } #define INTEGRATOR_SC_VALID_INT 0x003fffff @@ -337,15 +339,15 @@ static unsigned long timer_reload; static void integrator_clocksource_init(u32 khz) { void __iomem *base = (void __iomem *)TIMER2_VA_BASE; - u32 ctrl = TIMER_CTRL_ENABLE; + u32 ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC; if (khz >= 1500) { khz /= 16; - ctrl = TIMER_CTRL_DIV16; + ctrl |= TIMER_CTRL_DIV16; } - writel(ctrl, base + TIMER_CTRL); writel(0xffff, base + TIMER_LOAD); + writel(ctrl, base + TIMER_CTRL); clocksource_mmio_init(base + TIMER_VALUE, "timer2", khz * 1000, 200, 16, clocksource_mmio_readl_down); diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index dd56bfb351e..11b86e5b71c 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -27,7 +27,6 @@ #include <linux/spinlock.h> #include <linux/init.h> #include <linux/io.h> -#include <video/vga.h> #include <mach/hardware.h> #include <mach/platform.h> @@ -505,7 +504,6 @@ void __init pci_v3_preinit(void) pcibios_min_io = 0x6000; pcibios_min_mem = 0x00100000; - vga_base = PCI_MEMORY_VADDR; /* * Hook in our fault handler for PCI errors diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 5b114d1558c..11c85cd2731 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -4,7 +4,7 @@ # Common support obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o -obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o +obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index eb36b25450a..8987b3fe2eb 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -135,12 +135,6 @@ void ams_delta_latch2_write(u16 mask, u16 value) *(volatile __u16 *) AMS_DELTA_LATCH2_VIRT = ams_delta_latch2_reg; } -static void __init ams_delta_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} - static struct map_desc ams_delta_io_desc[] __initdata = { /* AMS_DELTA_LATCH1 */ { @@ -379,17 +373,13 @@ static int __init ams_delta_modem_init(void) } arch_initcall(ams_delta_modem_init); -static void __init ams_delta_map_io(void) -{ - omap1_map_common_io(); -} - MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") /* Maintainer: Jonathan McDowell <noodles@earth.li> */ .atag_offset = 0x100, - .map_io = ams_delta_map_io, + .map_io = omap15xx_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = ams_delta_init_irq, + .init_irq = omap1_init_irq, .init_machine = ams_delta_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 999789c4811..c92fd164b05 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -297,6 +297,39 @@ static struct omap_board_config_kernel fsample_config[] __initdata = { static void __init omap_fsample_init(void) { + /* Early, board-dependent init */ + + /* + * Hold GSM Reset until needed + */ + omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); + + /* + * UARTs -> done automagically by 8250 driver + */ + + /* + * CSx timings, GPIO Mux ... setup + */ + + /* Flash: CS0 timings setup */ + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); + omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); + + /* + * Ethernet support through the debug board + * CS1 timings setup + */ + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); + omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); + + /* + * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, + * It is used as the Ethernet controller interrupt + */ + omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, + OMAP7XX_IO_CONF_9); + fsample_init_smc91x(); if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0) @@ -326,12 +359,6 @@ static void __init omap_fsample_init(void) omap_register_i2c_bus(1, 100, NULL, 0); } -static void __init omap_fsample_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} - /* Only FPGA needs to be mapped here. All others are done with ioremap */ static struct map_desc omap_fsample_io_desc[] __initdata = { { @@ -350,49 +377,18 @@ static struct map_desc omap_fsample_io_desc[] __initdata = { static void __init omap_fsample_map_io(void) { - omap1_map_common_io(); + omap15xx_map_io(); iotable_init(omap_fsample_io_desc, ARRAY_SIZE(omap_fsample_io_desc)); - - /* Early, board-dependent init */ - - /* - * Hold GSM Reset until needed - */ - omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); - - /* - * UARTs -> done automagically by 8250 driver - */ - - /* - * CSx timings, GPIO Mux ... setup - */ - - /* Flash: CS0 timings setup */ - omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); - omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); - - /* - * Ethernet support through the debug board - * CS1 timings setup - */ - omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); - omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); - - /* - * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, - * It is used as the Ethernet controller interrupt - */ - omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9); } MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") /* Maintainer: Brian Swetland <swetland@google.com> */ .atag_offset = 0x100, .map_io = omap_fsample_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = omap_fsample_init_irq, + .init_irq = omap1_init_irq, .init_machine = omap_fsample_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index 23cc9e4ad50..5a9a54de41f 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -28,12 +28,6 @@ #include <plat/board.h> #include <plat/common.h> -static void __init omap_generic_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} - /* assume no Mini-AB port */ #ifdef CONFIG_ARCH_OMAP15XX @@ -87,17 +81,13 @@ static void __init omap_generic_init(void) omap_register_i2c_bus(1, 100, NULL, 0); } -static void __init omap_generic_map_io(void) -{ - omap1_map_common_io(); -} - MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710") /* Maintainer: Tony Lindgren <tony@atomide.com> */ .atag_offset = 0x100, - .map_io = omap_generic_map_io, + .map_io = omap16xx_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = omap_generic_init_irq, + .init_irq = omap1_init_irq, .init_machine = omap_generic_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 6c70c28d055..c8e1d4f6eed 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -373,12 +373,6 @@ static struct i2c_board_info __initdata h2_i2c_board_info[] = { }, }; -static void __init h2_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} - static struct omap_usb_config h2_usb_config __initdata = { /* usb1 has a Mini-AB port and external isp1301 transceiver */ .otg = 2, @@ -454,17 +448,13 @@ static void __init h2_init(void) h2_mmc_init(); } -static void __init h2_map_io(void) -{ - omap1_map_common_io(); -} - MACHINE_START(OMAP_H2, "TI-H2") /* Maintainer: Imre Deak <imre.deak@nokia.com> */ .atag_offset = 0x100, - .map_io = h2_map_io, + .map_io = omap16xx_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = h2_init_irq, + .init_irq = omap1_init_irq, .init_machine = h2_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 8e2b64a4692..c88e1317620 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -436,23 +436,13 @@ static void __init h3_init(void) h3_mmc_init(); } -static void __init h3_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} - -static void __init h3_map_io(void) -{ - omap1_map_common_io(); -} - MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") /* Maintainer: Texas Instruments, Inc. */ .atag_offset = 0x100, - .map_io = h3_map_io, + .map_io = omap16xx_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = h3_init_irq, + .init_irq = omap1_init_irq, .init_machine = h3_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index e81ead1c89e..e8eedd77fa6 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -500,7 +500,7 @@ static void __init htcherald_lcd_init(void) static void __init htcherald_map_io(void) { - omap1_map_common_io(); + omap7xx_map_io(); /* * The LCD panel must be disabled and DMA turned off here, as doing @@ -601,20 +601,14 @@ static void __init htcherald_init(void) #endif } -static void __init htcherald_init_irq(void) -{ - printk(KERN_INFO "htcherald_init_irq.\n"); - omap1_init_common_hw(); - omap1_init_irq(); -} - MACHINE_START(HERALD, "HTC Herald") /* Maintainer: Cory Maccarrone <darkstar6262@gmail.com> */ /* Maintainer: wing-linux.sourceforge.net */ .atag_offset = 0x100, .map_io = htcherald_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = htcherald_init_irq, + .init_irq = omap1_init_irq, .init_machine = htcherald_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 8b034594fbc..88cf8baf9e7 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -289,12 +289,6 @@ static void __init innovator_init_smc91x(void) } } -static void __init innovator_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} - #ifdef CONFIG_ARCH_OMAP15XX static struct omap_usb_config innovator1510_usb_config __initdata = { /* for bundled non-standard host and peripheral cables */ @@ -439,30 +433,32 @@ static void __init innovator_init(void) innovator_mmc_init(); } +/* + * REVISIT: Assume 15xx for now, we don't want to do revision check + * until later on. The right way to fix this is to set up a different + * machine_id for 16xx Innovator, or use device tree. + */ static void __init innovator_map_io(void) { - omap1_map_common_io(); + omap15xx_map_io(); -#ifdef CONFIG_ARCH_OMAP15XX - if (cpu_is_omap1510()) { - iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc)); - udelay(10); /* Delay needed for FPGA */ - - /* Dump the Innovator FPGA rev early - useful info for support. */ - printk("Innovator FPGA Rev %d.%d Board Rev %d\n", - fpga_read(OMAP1510_FPGA_REV_HIGH), - fpga_read(OMAP1510_FPGA_REV_LOW), - fpga_read(OMAP1510_FPGA_BOARD_REV)); - } -#endif + iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc)); + udelay(10); /* Delay needed for FPGA */ + + /* Dump the Innovator FPGA rev early - useful info for support. */ + pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n", + fpga_read(OMAP1510_FPGA_REV_HIGH), + fpga_read(OMAP1510_FPGA_REV_LOW), + fpga_read(OMAP1510_FPGA_BOARD_REV)); } MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") /* Maintainer: MontaVista Software, Inc. */ .atag_offset = 0x100, .map_io = innovator_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = innovator_init_irq, + .init_irq = omap1_init_irq, .init_machine = innovator_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 6825635ac68..8990b5d7865 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -39,21 +39,6 @@ #define ADS7846_PENDOWN_GPIO 15 -static void __init omap_nokia770_init_irq(void) -{ - /* On Nokia 770, the SleepX signal is masked with an - * MPUIO line by default. It has to be unmasked for it - * to become functional */ - - /* SleepX mask direction */ - omap_writew((omap_readw(0xfffb5008) & ~2), 0xfffb5008); - /* Unmask SleepX signal */ - omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004); - - omap1_init_common_hw(); - omap1_init_irq(); -} - static const unsigned int nokia770_keymap[] = { KEY(1, 0, GROUP_0 | KEY_UP), KEY(2, 0, GROUP_1 | KEY_F5), @@ -246,6 +231,15 @@ static inline void nokia770_mmc_init(void) static void __init omap_nokia770_init(void) { + /* On Nokia 770, the SleepX signal is masked with an + * MPUIO line by default. It has to be unmasked for it + * to become functional */ + + /* SleepX mask direction */ + omap_writew((omap_readw(0xfffb5008) & ~2), 0xfffb5008); + /* Unmask SleepX signal */ + omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004); + platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices)); spi_register_board_info(nokia770_spi_board_info, ARRAY_SIZE(nokia770_spi_board_info)); @@ -258,16 +252,12 @@ static void __init omap_nokia770_init(void) nokia770_mmc_init(); } -static void __init omap_nokia770_map_io(void) -{ - omap1_map_common_io(); -} - MACHINE_START(NOKIA770, "Nokia 770") .atag_offset = 0x100, - .map_io = omap_nokia770_map_io, + .map_io = omap16xx_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = omap_nokia770_init_irq, + .init_irq = omap1_init_irq, .init_machine = omap_nokia770_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 44b8e9362bf..3e12a697fa2 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -279,12 +279,6 @@ static void __init osk_init_cf(void) irq_set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING); } -static void __init osk_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} - static struct omap_usb_config osk_usb_config __initdata = { /* has usb host connector (A) ... for development it can also * be used, with a NONSTANDARD gender-bending cable/dongle, as @@ -576,17 +570,13 @@ static void __init osk_init(void) osk_mistral_init(); } -static void __init osk_map_io(void) -{ - omap1_map_common_io(); -} - MACHINE_START(OMAP_OSK, "TI-OSK") /* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */ .atag_offset = 0x100, - .map_io = osk_map_io, + .map_io = omap16xx_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = osk_init_irq, + .init_irq = omap1_init_irq, .init_machine = osk_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 3d8cd90b1db..4aa2d0efbc4 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -59,12 +59,6 @@ #define PALMTE_MMC2_GPIO OMAP_MPUIO(7) #define PALMTE_MMC3_GPIO OMAP_MPUIO(11) -static void __init omap_palmte_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} - static const unsigned int palmte_keymap[] = { KEY(0, 0, KEY_F1), /* Calendar */ KEY(1, 0, KEY_F2), /* Contacts */ @@ -269,16 +263,12 @@ static void __init omap_palmte_init(void) omap_register_i2c_bus(1, 100, NULL, 0); } -static void __init omap_palmte_map_io(void) -{ - omap1_map_common_io(); -} - MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") .atag_offset = 0x100, - .map_io = omap_palmte_map_io, + .map_io = omap15xx_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = omap_palmte_init_irq, + .init_irq = omap1_init_irq, .init_machine = omap_palmte_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index d0eefe81cd1..32254bdd00f 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -263,12 +263,6 @@ static struct spi_board_info __initdata palmtt_boardinfo[] = { } }; -static void __init omap_palmtt_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} - static struct omap_usb_config palmtt_usb_config __initdata = { .register_dev = 1, .hmc_mode = 0, @@ -315,16 +309,12 @@ static void __init omap_palmtt_init(void) omap_register_i2c_bus(1, 100, NULL, 0); } -static void __init omap_palmtt_map_io(void) -{ - omap1_map_common_io(); -} - MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T") .atag_offset = 0x100, - .map_io = omap_palmtt_map_io, + .map_io = omap15xx_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = omap_palmtt_init_irq, + .init_irq = omap1_init_irq, .init_machine = omap_palmtt_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 98e79bc0921..d41478d7e97 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -57,13 +57,6 @@ #define PALMZ71_SLIDER_GPIO OMAP_MPUIO(3) #define PALMZ71_MMC_IN_GPIO OMAP_MPUIO(4) -static void __init -omap_palmz71_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} - static const unsigned int palmz71_keymap[] = { KEY(0, 0, KEY_F1), KEY(1, 0, KEY_F2), @@ -334,17 +327,12 @@ omap_palmz71_init(void) palmz71_gpio_setup(0); } -static void __init -omap_palmz71_map_io(void) -{ - omap1_map_common_io(); -} - MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71") .atag_offset = 0x100, - .map_io = omap_palmz71_map_io, + .map_io = omap15xx_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = omap_palmz71_init_irq, + .init_irq = omap1_init_irq, .init_machine = omap_palmz71_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index ad3a1567604..7506f349939 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -265,6 +265,39 @@ static void __init perseus2_init_smc91x(void) static void __init omap_perseus2_init(void) { + /* Early, board-dependent init */ + + /* + * Hold GSM Reset until needed + */ + omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); + + /* + * UARTs -> done automagically by 8250 driver + */ + + /* + * CSx timings, GPIO Mux ... setup + */ + + /* Flash: CS0 timings setup */ + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); + omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); + + /* + * Ethernet support through the debug board + * CS1 timings setup + */ + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); + omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); + + /* + * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, + * It is used as the Ethernet controller interrupt + */ + omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, + OMAP7XX_IO_CONF_9); + perseus2_init_smc91x(); if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0) @@ -294,11 +327,6 @@ static void __init omap_perseus2_init(void) omap_register_i2c_bus(1, 100, NULL, 0); } -static void __init omap_perseus2_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} /* Only FPGA needs to be mapped here. All others are done with ioremap */ static struct map_desc omap_perseus2_io_desc[] __initdata = { { @@ -311,49 +339,18 @@ static struct map_desc omap_perseus2_io_desc[] __initdata = { static void __init omap_perseus2_map_io(void) { - omap1_map_common_io(); + omap7xx_map_io(); iotable_init(omap_perseus2_io_desc, ARRAY_SIZE(omap_perseus2_io_desc)); - - /* Early, board-dependent init */ - - /* - * Hold GSM Reset until needed - */ - omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); - - /* - * UARTs -> done automagically by 8250 driver - */ - - /* - * CSx timings, GPIO Mux ... setup - */ - - /* Flash: CS0 timings setup */ - omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); - omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); - - /* - * Ethernet support through the debug board - * CS1 timings setup - */ - omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); - omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); - - /* - * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, - * It is used as the Ethernet controller interrupt - */ - omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9); } MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") /* Maintainer: Kevin Hilman <kjh@hilman.org> */ .atag_offset = 0x100, .map_io = omap_perseus2_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = omap_perseus2_init_irq, + .init_irq = omap1_init_irq, .init_machine = omap_perseus2_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 602b55c39d3..bdf3b85142b 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -407,24 +407,13 @@ static void __init omap_sx1_init(void) gpio_direction_output(11, 0); /*A_SWITCH = 0 */ gpio_direction_output(15, 0); /*A_USB_ON = 0 */ } -/*----------------------------------------*/ -static void __init omap_sx1_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} -/*----------------------------------------*/ - -static void __init omap_sx1_map_io(void) -{ - omap1_map_common_io(); -} MACHINE_START(SX1, "OMAP310 based Siemens SX1") .atag_offset = 0x100, - .map_io = omap_sx1_map_io, + .map_io = omap15xx_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = omap_sx1_init_irq, + .init_irq = omap1_init_irq, .init_machine = omap_sx1_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 80165154617..42e5151c40a 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -159,17 +159,6 @@ static struct omap_usb_config voiceblue_usb_config __initdata = { static struct omap_board_config_kernel voiceblue_config[] = { }; -static void __init voiceblue_init_irq(void) -{ - omap1_init_common_hw(); - omap1_init_irq(); -} - -static void __init voiceblue_map_io(void) -{ - omap1_map_common_io(); -} - #define MACHINE_PANICED 1 #define MACHINE_REBOOTING 2 #define MACHINE_REBOOT 4 @@ -302,9 +291,10 @@ static void __init voiceblue_init(void) MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910") /* Maintainer: Ladislav Michl <michl@2n.cz> */ .atag_offset = 0x100, - .map_io = voiceblue_map_io, + .map_io = omap15xx_map_io, + .init_early = omap1_init_early, .reserve = omap_reserve, - .init_irq = voiceblue_init_irq, + .init_irq = omap1_init_irq, .init_machine = voiceblue_init, .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 36f26c3fa25..38e1142ba71 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -21,6 +21,7 @@ #include <mach/hardware.h> #include <asm/mach/map.h> +#include <plat/common.h> #include <plat/tc.h> #include <plat/board.h> #include <plat/mux.h> @@ -291,6 +292,8 @@ static int __init omap1_init_devices(void) if (!cpu_class_is_omap1()) return -ENODEV; + omap_sram_init(); + /* please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. */ diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 1cfa1b6bb62..7969cfda445 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -21,7 +21,6 @@ #include "clock.h" extern void omap_check_revision(void); -extern void omap_sram_init(void); /* * The machine specific code may provide the extra mapping besides the @@ -85,51 +84,45 @@ static struct map_desc omap16xx_io_desc[] __initdata = { #endif /* - * Maps common IO regions for omap1. This should only get called from - * board specific init. + * Maps common IO regions for omap1 */ -void __init omap1_map_common_io(void) +static void __init omap1_map_common_io(void) { iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc)); - - /* Normally devicemaps_init() would flush caches and tlb after - * mdesc->map_io(), but we must also do it here because of the CPU - * revision check below. - */ - local_flush_tlb_all(); - flush_cache_all(); - - /* We want to check CPU revision early for cpu_is_omapxxxx() macros. - * IO space mapping must be initialized before we can do that. - */ - omap_check_revision(); +} #if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) - if (cpu_is_omap7xx()) { - iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc)); - } +void __init omap7xx_map_io(void) +{ + omap1_map_common_io(); + iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc)); +} #endif + #ifdef CONFIG_ARCH_OMAP15XX - if (cpu_is_omap15xx()) { - iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc)); - } -#endif -#if defined(CONFIG_ARCH_OMAP16XX) - if (cpu_is_omap16xx()) { - iotable_init(omap16xx_io_desc, ARRAY_SIZE(omap16xx_io_desc)); - } +void __init omap15xx_map_io(void) +{ + omap1_map_common_io(); + iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc)); +} #endif - omap_sram_init(); - omap_init_consistent_dma_size(); +#if defined(CONFIG_ARCH_OMAP16XX) +void __init omap16xx_map_io(void) +{ + omap1_map_common_io(); + iotable_init(omap16xx_io_desc, ARRAY_SIZE(omap16xx_io_desc)); } +#endif /* - * Common low-level hardware init for omap1. This should only get called from - * board specific init. + * Common low-level hardware init for omap1. */ -void __init omap1_init_common_hw(void) +void omap1_init_early(void) { + omap_check_revision(); + omap_ioremap_init(); + /* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort * on a Posted Write in the TIPB Bridge". */ @@ -139,8 +132,8 @@ void __init omap1_init_common_hw(void) /* Must init clocks early to assure that timer interrupt works */ omap1_clk_init(); - omap1_mux_init(); + omap_init_consistent_dma_size(); } /* diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index ab7395d84bc..91f9abbd325 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -31,6 +31,7 @@ static int dsp_use; static struct clk *api_clk; static struct clk *dsp_clk; +static struct platform_device **omap_mcbsp_devices; static void omap1_mcbsp_request(unsigned int id) { @@ -78,6 +79,17 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = { .free = omap1_mcbsp_free, }; +#define OMAP7XX_MCBSP1_BASE 0xfffb1000 +#define OMAP7XX_MCBSP2_BASE 0xfffb1800 + +#define OMAP1510_MCBSP1_BASE 0xe1011800 +#define OMAP1510_MCBSP2_BASE 0xfffb1000 +#define OMAP1510_MCBSP3_BASE 0xe1017000 + +#define OMAP1610_MCBSP1_BASE 0xe1011800 +#define OMAP1610_MCBSP2_BASE 0xfffb1000 +#define OMAP1610_MCBSP3_BASE 0xe1017000 + #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) struct resource omap7xx_mcbsp_res[][6] = { { @@ -369,6 +381,39 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { #define OMAP16XX_MCBSP_COUNT 0 #endif +static void omap_mcbsp_register_board_cfg(struct resource *res, int res_count, + struct omap_mcbsp_platform_data *config, int size) +{ + int i; + + omap_mcbsp_devices = kzalloc(size * sizeof(struct platform_device *), + GFP_KERNEL); + if (!omap_mcbsp_devices) { + printk(KERN_ERR "Could not register McBSP devices\n"); + return; + } + + for (i = 0; i < size; i++) { + struct platform_device *new_mcbsp; + int ret; + + new_mcbsp = platform_device_alloc("omap-mcbsp", i + 1); + if (!new_mcbsp) + continue; + platform_device_add_resources(new_mcbsp, &res[i * res_count], + res_count); + config[i].reg_size = 2; + config[i].reg_step = 2; + new_mcbsp->dev.platform_data = &config[i]; + ret = platform_device_add(new_mcbsp); + if (ret) { + platform_device_put(new_mcbsp); + continue; + } + omap_mcbsp_devices[i] = new_mcbsp; + } +} + static int __init omap1_mcbsp_init(void) { if (!cpu_class_is_omap1()) diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c new file mode 100644 index 00000000000..6e90665a7c4 --- /dev/null +++ b/arch/arm/mach-omap1/timer.c @@ -0,0 +1,173 @@ +/** + * OMAP1 Dual-Mode Timers - platform device registration + * + * Contains first level initialization routines which internally + * generates timer device information and registers with linux + * device model. It also has low level function to chnage the timer + * input clock source. + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * Tarun Kanti DebBarma <tarun.kanti@ti.com> + * Thara Gopinath <thara@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/platform_device.h> + +#include <mach/irqs.h> + +#include <plat/dmtimer.h> + +#define OMAP1610_GPTIMER1_BASE 0xfffb1400 +#define OMAP1610_GPTIMER2_BASE 0xfffb1c00 +#define OMAP1610_GPTIMER3_BASE 0xfffb2400 +#define OMAP1610_GPTIMER4_BASE 0xfffb2c00 +#define OMAP1610_GPTIMER5_BASE 0xfffb3400 +#define OMAP1610_GPTIMER6_BASE 0xfffb3c00 +#define OMAP1610_GPTIMER7_BASE 0xfffb7400 +#define OMAP1610_GPTIMER8_BASE 0xfffbd400 + +#define OMAP1_DM_TIMER_COUNT 8 + +static int omap1_dm_timer_set_src(struct platform_device *pdev, + int source) +{ + int n = (pdev->id - 1) << 1; + u32 l; + + l = __raw_readl(MOD_CONF_CTRL_1) & ~(0x03 << n); + l |= source << n; + __raw_writel(l, MOD_CONF_CTRL_1); + + return 0; +} + + +int __init omap1_dm_timer_init(void) +{ + int i; + int ret; + struct dmtimer_platform_data *pdata; + struct platform_device *pdev; + + if (!cpu_is_omap16xx()) + return 0; + + for (i = 1; i <= OMAP1_DM_TIMER_COUNT; i++) { + struct resource res[2]; + u32 base, irq; + + switch (i) { + case 1: + base = OMAP1610_GPTIMER1_BASE; + irq = INT_1610_GPTIMER1; + break; + case 2: + base = OMAP1610_GPTIMER2_BASE; + irq = INT_1610_GPTIMER2; + break; + case 3: + base = OMAP1610_GPTIMER3_BASE; + irq = INT_1610_GPTIMER3; + break; + case 4: + base = OMAP1610_GPTIMER4_BASE; + irq = INT_1610_GPTIMER4; + break; + case 5: + base = OMAP1610_GPTIMER5_BASE; + irq = INT_1610_GPTIMER5; + break; + case 6: + base = OMAP1610_GPTIMER6_BASE; + irq = INT_1610_GPTIMER6; + break; + case 7: + base = OMAP1610_GPTIMER7_BASE; + irq = INT_1610_GPTIMER7; + break; + case 8: + base = OMAP1610_GPTIMER8_BASE; + irq = INT_1610_GPTIMER8; + break; + default: + /* + * not supposed to reach here. + * this is to remove warning. + */ + return -EINVAL; + } + + pdev = platform_device_alloc("omap_timer", i); + if (!pdev) { + pr_err("%s: Failed to device alloc for dmtimer%d\n", + __func__, i); + return -ENOMEM; + } + + memset(res, 0, 2 * sizeof(struct resource)); + res[0].start = base; + res[0].end = base + 0x46; + res[0].flags = IORESOURCE_MEM; + res[1].start = irq; + res[1].end = irq; + res[1].flags = IORESOURCE_IRQ; + ret = platform_device_add_resources(pdev, res, + ARRAY_SIZE(res)); + if (ret) { + dev_err(&pdev->dev, "%s: Failed to add resources.\n", + __func__); + goto err_free_pdev; + } + + pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(&pdev->dev, "%s: Failed to allocate pdata.\n", + __func__); + ret = -ENOMEM; + goto err_free_pdata; + } + + pdata->set_timer_src = omap1_dm_timer_set_src; + pdata->needs_manual_reset = 1; + + ret = platform_device_add_data(pdev, pdata, sizeof(*pdata)); + if (ret) { + dev_err(&pdev->dev, "%s: Failed to add platform data.\n", + __func__); + goto err_free_pdata; + } + + ret = platform_device_add(pdev); + if (ret) { + dev_err(&pdev->dev, "%s: Failed to add platform device.\n", + __func__); + goto err_free_pdata; + } + + dev_dbg(&pdev->dev, " Registered.\n"); + } + + return 0; + +err_free_pdata: + kfree(pdata); + +err_free_pdev: + platform_device_unregister(pdev); + + return ret; +} +arch_initcall(omap1_dm_timer_init); diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 57b66d590c5..e0a318df95b 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -106,9 +106,13 @@ comment "OMAP Board Type" depends on ARCH_OMAP2PLUS config MACH_OMAP_GENERIC - bool "Generic OMAP board" - depends on ARCH_OMAP2 + bool "Generic OMAP2+ board" + depends on ARCH_OMAP2PLUS + select USE_OF default y + help + Support for generic TI OMAP2+ boards using Flattened Device Tree. + More information at Documentation/devicetree config MACH_OMAP2_TUSB6010 bool diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index f3433656043..512978586b2 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -89,14 +89,13 @@ obj-$(CONFIG_ARCH_OMAP4) += prcm.o cm2xxx_3xxx.o cminst44xx.o \ vp44xx_data.o # OMAP voltage domains -ifeq ($(CONFIG_PM),y) -voltagedomain-common := voltage.o -obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common) +voltagedomain-common := voltage.o vc.o vp.o +obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common) \ + voltagedomains2xxx_data.o obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common) \ voltagedomains3xxx_data.o obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common) \ voltagedomains44xx_data.o -endif # OMAP powerdomain framework powerdomain-common += powerdomain.o powerdomain-common.o @@ -116,9 +115,12 @@ obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common) \ obj-$(CONFIG_ARCH_OMAP2) += clockdomain.o \ clockdomain2xxx_3xxx.o \ clockdomains2xxx_3xxx_data.o +obj-$(CONFIG_SOC_OMAP2420) += clockdomains2420_data.o +obj-$(CONFIG_SOC_OMAP2430) += clockdomains2430_data.o obj-$(CONFIG_ARCH_OMAP3) += clockdomain.o \ clockdomain2xxx_3xxx.o \ - clockdomains2xxx_3xxx_data.o + clockdomains2xxx_3xxx_data.o \ + clockdomains3xxx_data.o obj-$(CONFIG_ARCH_OMAP4) += clockdomain.o \ clockdomain44xx.o \ clockdomains44xx_data.o @@ -185,78 +187,66 @@ endif # Specific board support obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o -obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o \ - hsmmc.o +obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o -obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o \ - hsmmc.o -obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o \ - hsmmc.o -obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \ - board-flash.o \ - hsmmc.o -obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o \ - hsmmc.o -obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o \ - hsmmc.o -obj-$(CONFIG_MACH_OVERO) += board-overo.o \ - hsmmc.o -obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \ - hsmmc.o -obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \ - hsmmc.o -obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \ - hsmmc.o \ - board-flash.o +obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o +obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o +obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o +obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o +obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o +obj-$(CONFIG_MACH_ENCORE) += board-omap3encore.o +obj-$(CONFIG_MACH_OVERO) += board-overo.o +obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o +obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o +obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o obj-$(CONFIG_MACH_NOKIA_RM680) += board-rm680.o \ - sdram-nokia.o \ - hsmmc.o + sdram-nokia.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \ sdram-nokia.o \ board-rx51-peripherals.o \ - board-rx51-video.o \ - hsmmc.o + board-rx51-video.o obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom.o \ board-zoom-peripherals.o \ board-zoom-display.o \ - board-flash.o \ - hsmmc.o \ board-zoom-debugboard.o obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom.o \ board-zoom-peripherals.o \ board-zoom-display.o \ - board-flash.o \ - hsmmc.o \ board-zoom-debugboard.o obj-$(CONFIG_MACH_OMAP_3630SDP) += board-3630sdp.o \ board-zoom-peripherals.o \ - board-zoom-display.o \ - board-flash.o \ - hsmmc.o -obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \ - hsmmc.o + board-zoom-display.o +obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o -obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o \ - hsmmc.o -obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \ - hsmmc.o +obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o +obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o \ - hsmmc.o \ omap_phy_internal.o obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o \ - hsmmc.o \ + omap_phy_internal.o + +obj-$(CONFIG_MACH_PCM049) += board-omap4pcm049.o \ omap_phy_internal.o obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o \ - omap_phy_internal.o \ + omap_phy_internal.o obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o -obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o \ - hsmmc.o +obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o obj-$(CONFIG_MACH_TI8168EVM) += board-ti8168evm.o + # Platform specific device init code + +omap-flash-$(CONFIG_MTD_NAND_OMAP2) := board-flash.o +omap-flash-$(CONFIG_MTD_ONENAND_OMAP2) := board-flash.o +obj-y += $(omap-flash-y) $(omap-flash-m) + +omap-hsmmc-$(CONFIG_MMC_OMAP_HS) := hsmmc.o +obj-y += $(omap-hsmmc-m) $(omap-hsmmc-y) + + usbfs-$(CONFIG_ARCH_OMAP_OTG) := usb-fs.o obj-y += $(usbfs-m) $(usbfs-y) obj-y += usb-musb.o diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 195157da21e..638cecb9ea1 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -141,12 +141,6 @@ static struct omap_board_config_kernel sdp2430_config[] __initdata = { {OMAP_TAG_LCD, &sdp2430_lcd_config}, }; -static void __init omap_2430sdp_init_early(void) -{ - omap2_init_common_infrastructure(); - omap2_init_common_devices(NULL, NULL); -} - static struct regulator_consumer_supply sdp2430_vmmc1_supplies[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; @@ -193,7 +187,8 @@ static int __init omap2430_i2c_init(void) { omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo, ARRAY_SIZE(sdp2430_i2c1_boardinfo)); - omap2_pmic_init("twl4030", &sdp2430_twldata); + omap_pmic_init(2, 100, "twl4030", INT_24XX_SYS_NIRQ, + &sdp2430_twldata); return 0; } @@ -235,6 +230,7 @@ static void __init omap_2430sdp_init(void) platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices)); omap_serial_init(); + omap_sdrc_init(NULL, NULL); omap2_hsmmc_init(mmc); omap2_usbfs_init(&sdp2430_usb_config); @@ -248,18 +244,12 @@ static void __init omap_2430sdp_init(void) "Secondary LCD backlight"); } -static void __init omap_2430sdp_map_io(void) -{ - omap2_set_globals_243x(); - omap243x_map_common_io(); -} - MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board") /* Maintainer: Syed Khasim - Texas Instruments Inc */ .atag_offset = 0x100, .reserve = omap_reserve, - .map_io = omap_2430sdp_map_io, - .init_early = omap_2430sdp_init_early, + .map_io = omap243x_map_io, + .init_early = omap2430_init_early, .init_irq = omap2_init_irq, .init_machine = omap_2430sdp_init, .timer = &omap2_timer, diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 2430531b223..5b5999caf71 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -225,12 +225,6 @@ static struct omap_dss_board_info sdp3430_dss_data = { static struct omap_board_config_kernel sdp3430_config[] __initdata = { }; -static void __init omap_3430sdp_init_early(void) -{ - omap2_init_common_infrastructure(); - omap2_init_common_devices(hyb18m512160af6_sdrc_params, NULL); -} - static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, @@ -719,6 +713,7 @@ static void __init omap_3430sdp_init(void) gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1; omap_ads7846_init(1, gpio_pendown, 310, NULL); board_serial_init(); + omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL); usb_musb_init(NULL); board_smc91x_init(); board_flash_init(sdp_flash_partitions, chip_sel_3430, 0); @@ -732,7 +727,7 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, - .init_early = omap_3430sdp_init_early, + .init_early = omap3430_init_early, .init_irq = omap3_init_irq, .init_machine = omap_3430sdp_init, .timer = &omap3_timer, diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index 8b5b5aa751e..f552305162f 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -70,13 +70,6 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = { static struct omap_board_config_kernel sdp_config[] __initdata = { }; -static void __init omap_sdp_init_early(void) -{ - omap2_init_common_infrastructure(); - omap2_init_common_devices(h8mbx00u0mer0em_sdrc_params, - h8mbx00u0mer0em_sdrc_params); -} - #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, @@ -207,6 +200,8 @@ static void __init omap_sdp_init(void) omap_board_config = sdp_config; omap_board_config_size = ARRAY_SIZE(sdp_config); zoom_peripherals_init(); + omap_sdrc_init(h8mbx00u0mer0em_sdrc_params, + h8mbx00u0mer0em_sdrc_params); zoom_display_init(); board_smc91x_init(); board_flash_init(sdp_flash_partitions, chip_sel_sdp, NAND_BUSWIDTH_16); @@ -218,7 +213,7 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board") .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, - .init_early = omap_sdp_init_early, + .init_early = omap3630_init_early, .init_irq = omap3_init_irq, .init_machine = omap_sdp_init, .timer = &omap3_timer, diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index be931105d68..6d2b61409c1 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -129,7 +129,7 @@ static const int sdp4430_keymap[] = { KEY(7, 6, KEY_OK), KEY(7, 7, KEY_DOWN), }; -static struct omap_device_pad keypad_pads[] __initdata = { +static struct omap_device_pad keypad_pads[] = { { .name = "kpd_col1.kpd_col1", .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, }, @@ -389,12 +389,6 @@ static struct omap_board_config_kernel sdp4430_config[] __initdata = { { OMAP_TAG_LCD, &sdp4430_lcd_config }, }; -static void __init omap_4430sdp_init_early(void) -{ - omap2_init_common_infrastructure(); - omap2_init_common_devices(NULL, NULL); -} - static struct omap_musb_board_data musb_board_data = { .interface_type = MUSB_INTERFACE_UTMI, .mode = MUSB_OTG, @@ -809,6 +803,7 @@ static void __init omap_4430sdp_init(void) omap_sfh7741prox_init(); platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); board_serial_init(); + omap_sdrc_init(NULL, NULL); omap4_sdp4430_wifi_init(); omap4_twl6030_hsmmc_init(mmc); @@ -830,18 +825,12 @@ static void __init omap_4430sdp_init(void) omap_4430sdp_display_init(); } -static void __init omap_4430sdp_map_io(void) -{ - omap2_set_globals_443x(); - omap44xx_map_common_io(); -} - MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board") /* Maintainer: Santosh Shilimkar - Texas Instruments Inc */ .atag_offset = 0x100, .reserve = omap_reserve, - .map_io = omap_4430sdp_map_io, - .init_early = omap_4430sdp_init_early, + .map_io = omap4_map_io, + .init_early = omap4430_init_early, .init_irq = gic_init_irq, .init_machine = omap_4430sdp_init, .timer = &omap4_timer, diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index db110fdb8b2..7834536ab41 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -47,12 +47,6 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static void __init am3517_crane_init_early(void) -{ - omap2_init_common_infrastructure(); - omap2_init_common_devices(NULL, NULL); -} - static struct usbhs_omap_board_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, @@ -70,6 +64,7 @@ static void __init am3517_crane_init(void) omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_serial_init(); + omap_sdrc_init(NULL, NULL); omap_board_config = am3517_crane_config; omap_board_config_size = ARRAY_SIZE(am3517_crane_config); @@ -101,7 +96,7 @@ MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD") .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, - .init_early = am3517_crane_init_early, + .init_early = am35xx_init_early, .init_irq = omap3_init_irq, .init_machine = am3517_crane_init, .timer = &omap3_timer, diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 1325085e453..65a5912278a 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -362,11 +362,6 @@ static struct omap_dss_board_info am3517_evm_dss_data = { /* * Board initialization */ -static void __init am3517_evm_init_early(void) -{ - omap2_init_common_infrastructure(); - omap2_init_common_devices(NULL, NULL); -} static struct omap_musb_board_data musb_board_data = { .interface_type = MUSB_INTERFACE_ULPI, @@ -469,6 +464,7 @@ static void __init am3517_evm_init(void) am3517_evm_i2c_init(); omap_display_init(&am3517_evm_dss_data); omap_serial_init(); + omap_sdrc_init(NULL, NULL); /* Configure GPIO for EHCI port */ omap_mux_init_gpio(57, OMAP_PIN_OUTPUT); @@ -493,7 +489,7 @@ MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM") .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, - .init_early = am3517_evm_init_early, + .init_early = am35xx_init_early, .init_irq = omap3_init_irq, .init_machine = am3517_evm_init, .timer = &omap3_timer, diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 67800e647d7..29c409b68b5 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -273,12 +273,6 @@ static struct omap_board_config_kernel apollon_config[] __initdata = { { OMAP_TAG_LCD, &apollon_lcd_config }, }; -static void __init omap_apollon_init_early(void) -{ - omap2_init_common_infrastructure(); - omap2_init_common_devices(NULL, NULL); -} - static struct gpio apollon_gpio_leds[] __initdata = { { LED0_GPIO13, GPIOF_OUT_INIT_LOW, "LED0" }, /* LED0 - AA10 */ { LED1_GPIO14, GPIOF_OUT_INIT_LOW, "LED1" }, /* LED1 - AA6 */ @@ -340,20 +334,15 @@ static void __init omap_apollon_init(void) */ platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices)); omap_serial_init(); -} - -static void __init omap_apollon_map_io(void) -{ - omap2_set_globals_242x(); - omap242x_map_common_io(); + omap_sdrc_init(NULL, NULL); } MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon") /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */ .atag_offset = 0x100, .reserve = omap_reserve, - .map_io = omap_apollon_map_io, - .init_early = omap_apollon_init_early, + .map_io = omap242x_map_io, + .init_early = omap2420_init_early, .init_irq = omap2_init_irq, .init_machine = omap_apollon_init, .timer = &omap2_timer, diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 38179c17550..5665e688bd2 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -471,13 +471,6 @@ static void __init cm_t35_init_i2c(void) omap3_pmic_init("tps65930", &cm_t35_twldata); } -static void __init cm_t35_init_early(void) -{ - omap2_init_common_infrastructure(); - omap2_init_common_devices(mt46h32m32lf6_sdrc_params, - mt46h32m32lf6_sdrc_params); -} - #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { /* nCS and IRQ for CM-T35 ethernet */ @@ -610,6 +603,8 @@ static void __init cm_t3x_common_init(void) omap_board_config_size = ARRAY_SIZE(cm_t35_config); omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); omap_serial_init(); + omap_sdrc_init(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); cm_t35_init_i2c(); omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL); cm_t35_init_ethernet(); @@ -637,7 +632,7 @@ MACHINE_START(CM_T35, "Compulab CM-T35") .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, - .init_early = cm_t35_init_early, + .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, .init_machine = cm_t35_init, .timer = &omap3_timer, @@ -647,7 +642,7 @@ MACHINE_START(CM_T3730, "Compulab CM-T3730") .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, - .init_early = cm_t35_init_early, + .init_early = omap3630_init_early, .init_irq = omap3_init_irq, .init_machine = cm_t3730_init, .timer = &omap3_timer, diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index aed9c29f9fa..3f4dc662684 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -251,12 +251,6 @@ static inline void cm_t3517_init_nand(void) {} static struct omap_board_config_kernel cm_t3517_config[] __initdata = { }; -static void __init cm_t3517_init_early(void) -{ - omap2_init_common_infrastructure(); - omap2_init_common_devices(NULL, NULL); -} - #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { /* GPIO186 - Green LED */ @@ -289,6 +283,7 @@ static void __init cm_t3517_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_serial_init(); + omap_sdrc_init(NULL, NULL); omap_board_config = cm_t3517_config; omap_board_config_size = ARRAY_SIZE(cm_t3517_config); cm_t3517_init_leds(); @@ -302,7 +297,7 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517") .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, - .init_early = cm_t3517_init_early, + .init_early = am35xx_init_early, .init_irq = omap3_init_irq, .init_machine = cm_t3517_init, .timer = &omap3_timer, diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 99a42432ac9..556df32d88e 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -397,19 +397,6 @@ static struct platform_device keys_gpio = { }, }; - -static void __init devkit8000_init_early(void) -{ - omap2_init_common_infrastructure(); - omap2_init_common_devices(mt46h32m32lf6_sdrc_params, - mt46h32m32lf6_sdrc_params); -} - -static void __init devkit8000_init_irq(void) -{ - omap3_init_irq(); -} - #define OMAP_DM9000_BASE 0x2c000000 static struct resource omap_dm9000_resources[] = { @@ -645,6 +632,8 @@ static void __init devkit8000_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); omap_serial_init(); + omap_sdrc_init(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); omap_dm9000_init(); @@ -670,8 +659,8 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000") .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, - .init_early = devkit8000_init_early, - .init_irq = devkit8000_init_irq, + .init_early = omap35xx_init_early, + .init_irq = omap3_init_irq, .init_machine = devkit8000_init, .timer = &omap3_secure_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index aa1b0cbe19d..30a6f527510 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -148,11 +148,6 @@ __init board_nand_init(struct mtd_partition *nand_parts, board_nand_data.gpmc_irq = OMAP_GPMC_IRQ_BASE + cs; gpmc_nand_init(&board_nand_data); } -#else -void -__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs, int nand_type) -{ -} #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */ /** diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h index c240a3f8d16..d25503a9841 100644 --- a/arch/arm/mach-omap2/board-flash.h +++ b/arch/arm/mach-omap2/board-flash.h @@ -24,7 +24,26 @@ struct flash_partitions { int nr_parts; }; +#if defined(CONFIG_MTD_NAND_OMAP2) || \ + defined(CONFIG_MTD_NAND_OMAP2_MODULE) || \ + defined(CONFIG_MTD_ONENAND_OMAP2) || \ + defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) extern void board_flash_init(struct flash_partitions [], char chip_sel[][GPMC_CS_NUM], int nand_type); +#else +static inline void board_flash_init(struct flash_partitions part[], + char chip_sel[][GPMC_CS_NUM], int nand_type) +{ +} +#endif + +#if defined(CONFIG_MTD_NAND_OMAP2) || \ + defined(CONFIG_MTD_NAND_OMAP2_MODULE) extern void board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs, int nand_type); +#else +static inline void board_nand_init(struct mtd_partition *nand_parts, + u8 nr_parts, u8 cs, int nand_type) +{ +} +#endif diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 25642697281..0c427976d62 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -1,76 +1,158 @@ /* - * linux/arch/arm/mach-omap2/board-generic.c - * * Copyright (C) 2005 Nokia Corporation * Author: Paul Mundt <paul.mundt@nokia.com> * - * Modified from mach-omap/omap1/board-generic.c + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ * - * Code for generic OMAP2 board. Should work on many OMAP2 systems where - * the bootloader passes the board-specific data to the kernel. - * Do not put any board specific code to this file; create a new machine - * type if you need custom low-level initializations. + * Modified from the original mach-omap/omap2/board-generic.c did by Paul + * to support the OMAP2+ device tree boards with an unique board file. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/device.h> +#include <linux/io.h> +#include <linux/of_platform.h> +#include <linux/irqdomain.h> +#include <linux/i2c/twl.h> #include <mach/hardware.h> -#include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <mach/gpio.h> -#include <plat/usb.h> #include <plat/board.h> #include <plat/common.h> +#include <mach/omap4-common.h> +#include "common-board-devices.h" + +/* + * XXX: Still needed to boot until the i2c & twl driver is adapted to + * device-tree + */ +static struct twl4030_platform_data sdp4430_twldata = { + .irq_base = TWL6030_IRQ_BASE, + .irq_end = TWL6030_IRQ_END, +}; -static struct omap_board_config_kernel generic_config[] = { +static void __init omap4_i2c_init(void) +{ + omap4_pmic_init("twl6030", &sdp4430_twldata); +} + +static struct twl4030_platform_data beagle_twldata = { + .irq_base = TWL4030_IRQ_BASE, + .irq_end = TWL4030_IRQ_END, }; -static void __init omap_generic_init_early(void) +static void __init omap3_i2c_init(void) { - omap2_init_common_infrastructure(); - omap2_init_common_devices(NULL, NULL); + omap3_pmic_init("twl4030", &beagle_twldata); } +static struct of_device_id omap_dt_match_table[] __initdata = { + { .compatible = "simple-bus", }, + { .compatible = "ti,omap-infra", }, + { } +}; + +static struct of_device_id intc_match[] __initdata = { + { .compatible = "ti,omap3-intc", }, + { .compatible = "arm,cortex-a9-gic", }, + { } +}; + static void __init omap_generic_init(void) { + struct device_node *node = of_find_matching_node(NULL, intc_match); + if (node) + irq_domain_add_simple(node, 0); + omap_serial_init(); - omap_board_config = generic_config; - omap_board_config_size = ARRAY_SIZE(generic_config); + omap_sdrc_init(NULL, NULL); + + of_platform_populate(NULL, omap_dt_match_table, NULL, NULL); +} + +static void __init omap4_init(void) +{ + omap4_i2c_init(); + omap_generic_init(); } -static void __init omap_generic_map_io(void) +static void __init omap3_init(void) { - if (cpu_is_omap242x()) { - omap2_set_globals_242x(); - omap242x_map_common_io(); - } else if (cpu_is_omap243x()) { - omap2_set_globals_243x(); - omap243x_map_common_io(); - } else if (cpu_is_omap34xx()) { - omap2_set_globals_3xxx(); - omap34xx_map_common_io(); - } else if (cpu_is_omap44xx()) { - omap2_set_globals_443x(); - omap44xx_map_common_io(); - } + omap3_i2c_init(); + omap_generic_init(); } -/* XXX This machine entry name should be updated */ -MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx") - /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */ +#if defined(CONFIG_SOC_OMAP2420) +static const char *omap242x_boards_compat[] __initdata = { + "ti,omap2420", + NULL, +}; + +DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)") + .atag_offset = 0x100, + .reserve = omap_reserve, + .map_io = omap242x_map_io, + .init_early = omap2420_init_early, + .init_irq = omap2_init_irq, + .init_machine = omap_generic_init, + .timer = &omap2_timer, + .dt_compat = omap242x_boards_compat, +MACHINE_END +#endif + +#if defined(CONFIG_SOC_OMAP2430) +static const char *omap243x_boards_compat[] __initdata = { + "ti,omap2430", + NULL, +}; + +DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)") .atag_offset = 0x100, .reserve = omap_reserve, - .map_io = omap_generic_map_io, - .init_early = omap_generic_init_early, + .map_io = omap243x_map_io, + .init_early = omap2430_init_early, .init_irq = omap2_init_irq, .init_machine = omap_generic_init, .timer = &omap2_timer, + .dt_compat = omap243x_boards_compat, +MACHINE_END +#endif + +#if defined(CONFIG_ARCH_OMAP3) +static const char *omap3_boards_compat[] __initdata = { + "ti,omap3", + NULL, +}; + +DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") + .atag_offset = 0x100, + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = omap3430_init_early, + .init_irq = omap3_init_irq, + .init_machine = omap3_init, + .timer = &omap3_timer, + .dt_compat = omap3_boards_compat, +MACHINE_END +#endif + +#if defined(CONFIG_ARCH_OMAP4) +static const char *omap4_boards_compat[] __initdata = { + "ti,omap4", + NULL, +}; + +DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)") + .atag_offset = 0x100, + .reserve = omap_reserve, + .map_io = omap4_map_io, + .init_early = omap4430_init_early, + .init_irq = gic_init_irq, + .init_machine = omap4_init, + .timer = &omap4_timer, + .dt_compat = omap4_boards_compat, MACHINE_END +#endif diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index a58c6ba06f7..fe75c195f69 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -290,17 +290,6 @@ static struct omap_board_config_kernel h4_config[] __initdata = { { OMAP_TAG_LCD, &h4_lcd_config }, }; -static void __init omap_h4_init_early(void) -{ - omap2_init_common_infrastructure(); - omap2_init_common_devices(NULL, NULL); -} - -static void __init omap_h4_init_irq(void) -{ - omap2_init_irq(); -} - static struct at24_platform_data m24c01 = { .byte_len = SZ_1K / 8, .page_size = 16, @@ -371,22 +360,17 @@ static void __init omap_h4_init(void) platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices)); omap2_usbfs_init(&h4_usb_config); omap_serial_init(); + omap_sdrc_init(NULL, NULL); h4_init_flash(); } -static void __init omap_h4_map_io(void) -{ - omap2_set_globals_242x(); - omap242x_map_common_io(); -} - MACHINE_START(OMAP_H4, "OMAP2420 H4 board") /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */ .atag_offset = 0x100, .reserve = omap_reserve, - .map_io = omap_h4_map_io, - .init_early = omap_h4_init_early, - .init_irq = omap_h4_init_irq, + .map_io = omap242x_map_io, + .init_early = omap2420_init_early, + .init_irq = omap2_init_irq, .init_machine = omap_h4_init, .timer = &omap2_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 7040352b16b..e20cad6a083 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -491,13 +491,6 @@ static struct platform_device *igep_devices[] __initdata = { &igep_vwlan_device, }; -static void __init igep_init_early(void) -{ - omap2_init_common_infrastructure(); - omap2_init_common_devices(m65kxxxxam_sdrc_params, - m65kxxxxam_sdrc_params); -} - static int igep2_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_RIGHT), @@ -650,6 +643,8 @@ static void __init igep_init(void) igep_i2c_init(); platform_add_devices(igep_devices, ARRAY_SIZE(igep_devices)); omap_serial_init(); + omap_sdrc_init(m65kxxxxam_sdrc_params, + m65kxxxxam_sdrc_params); usb_musb_init(NULL); igep_flash_init(); @@ -675,7 +670,7 @@ MACHINE_START(IGEP0020, "IGEP v2 board") .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, - .init_early = igep_init_early, + .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, .init_machine = igep_init, .timer = &omap3_timer, @@ -685,7 +680,7 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module") .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, - .init_early = igep_init_early, + .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, .init_machine = igep_init, .timer = &omap3_timer, diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index edf752bb24b..0fa28be2cfd 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -193,12 +193,6 @@ static struct omap_board_config_kernel ldp_config[] __initdata = { { OMAP_TAG_LCD, &ldp_lcd_config }, }; -static void __init omap_ldp_init_early(void) -{ - omap2_init_common_infrastructure(); - omap2_init_common_devices(NULL, NULL); -} - static struct twl4030_gpio_platform_data ldp_gpio_data = { .gpio_base = OMAP_MAX_GPIO_LINES, .irq_base = TWL4030_GPIO_IRQ_BASE, @@ -325,6 +319,7 @@ static void __init omap_ldp_init(void) platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices)); omap_ads7846_init(1, 54, 310, NULL); omap_serial_init(); + omap_sdrc_init(NULL, NULL); usb_musb_init(NULL); board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0); @@ -336,7 +331,7 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board") .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, - .init_early = omap_ldp_init_early, + .init_early = omap3430_init_early, .init_irq = omap3_init_irq, .init_machine = omap_ldp_init, .timer = &omap3_timer, diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 6ce748154f2..e9d5f4a3d06 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -616,18 +616,6 @@ static struct i2c_board_info n810_i2c_board_info_2[] __initdata = { }, }; -static void __init n8x0_map_io(void) -{ - omap2_set_globals_242x(); - omap242x_map_common_io(); -} - -static void __init n8x0_init_early(void) -{ - omap2_init_common_infrastructure(); - omap2_init_common_devices(NULL, NULL); -} - #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { /* I2S codec port pins for McBSP block */ @@ -689,6 +677,7 @@ static void __init n8x0_init_machine(void) i2c_register_board_info(2, n810_i2c_board_info_2, ARRAY_SIZE(n810_i2c_board_info_2)); board_serial_init(); + omap_sdrc_init(NULL, NULL); gpmc_onenand_init(board_onenand_data); n8x0_mmc_init(); n8x0_usb_init(); @@ -697,8 +686,8 @@ static void __init n8x0_init_machine(void) MACHINE_START(NOKIA_N800, "Nokia N800") .atag_offset = 0x100, .reserve = omap_reserve, - .map_io = n8x0_map_io, - .init_early = n8x0_init_early, + .map_io = omap242x_map_io, + .init_early = omap2420_init_early, .init_irq = omap2_init_irq, .init_machine = n8x0_init_machine, .timer = &omap2_timer, @@ -707,8 +696,8 @@ MACHINE_END MACHINE_START(NOKIA_N810, "Nokia N810") .atag_offset = 0x100, .reserve = omap_reserve, - .map_io = n8x0_map_io, - .init_early = n8x0_init_early, + .map_io = omap242x_map_io, + .init_early = omap2420_init_early, .init_irq = omap2_init_irq, .init_machine = n8x0_init_machine, .timer = &omap2_timer, @@ -717,8 +706,8 @@ MACHINE_END MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX") .atag_offset = 0x100, .reserve = omap_reserve, - .map_io = n8x0_map_io, - .init_early = n8x0_init_early, + .map_io = omap242x_map_io, + .init_early = omap2420_init_early, .init_irq = omap2_init_irq, .init_machine = n8x0_init_machine, .timer = &omap2_timer, diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 1fde8a0474b..22e84eabdbe 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -444,18 +444,6 @@ static struct platform_device keys_gpio = { }, }; -static void __init omap3_beagle_init_early(void) -{ - omap2_init_common_infrastructure(); - omap2_init_common_devices(mt46h32m32lf6_sdrc_params, - mt46h32m32lf6_sdrc_params); -} - -static void __init omap3_beagle_init_irq(void) -{ - omap3_init_irq(); -} - static struct platform_device *omap3_beagle_devices[] __initdata = { &leds_gpio, &keys_gpio, @@ -493,8 +481,8 @@ static void __init beagle_opp_init(void) if (cpu_is_omap3630()) { struct device *mpu_dev, *iva_dev; - mpu_dev = omap2_get_mpuss_device(); - iva_dev = omap2_get_iva_device(); + mpu_dev = omap_device_get_by_hwmod_name("mpu"); + iva_dev = omap_device_get_by_hwmod_name("iva"); if (!mpu_dev || !iva_dev) { pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n", @@ -534,6 +522,8 @@ static void __init omap3_beagle_init(void) ARRAY_SIZE(omap3_beagle_devices)); omap_display_init(&beagle_dss_data); omap_serial_init(); + omap_sdrc_init(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); omap_mux_init_gpio(170, OMAP_PIN_INPUT); /* REVISIT leave DVI powered down until it's needed ... */ @@ -560,8 +550,8 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, - .init_early = omap3_beagle_init_early, - .init_irq = omap3_beagle_init_irq, + .init_early = omap3_init_early, + .init_irq = omap3_init_irq, .init_machine = omap3_beagle_init, .timer = &omap3_secure_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 15c69a0c1ce..aa6a9351ce4 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -520,12 +520,6 @@ static int __init omap3_evm_i2c_init(void) static struct omap_board_config_kernel omap3_evm_config[] __initdata = { }; -static void __init omap3_evm_init_early(void) -{ - omap2_init_common_infrastructure(); - omap2_init_common_devices(mt46h32m32lf6_sdrc_params, NULL); -} - static struct usbhs_omap_board_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, @@ -640,6 +634,7 @@ static void __init omap3_evm_init(void) omap_display_init(&omap3_evm_dss_data); omap_serial_init(); + omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL); /* OMAP3EVM uses ISP1504 phy and so register nop transceiver */ usb_nop_xceiv_register(); @@ -684,7 +679,7 @@ MACHINE_START(OMAP3EVM, "OMAP3 EVM") .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, - .init_early = omap3_evm_init_early, + .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, .init_machine = omap3_evm_init, .timer = &omap3_timer, diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 01354a214ca..7c0f193f246 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -182,12 +182,6 @@ static inline void __init board_smsc911x_init(void) gpmc_smsc911x_init(&board_smsc911x_data); } -static void __init omap3logic_init_early(void) -{ - omap2_init_common_infrastructure(); - omap2_init_common_devices(NULL, NULL); -} - #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, @@ -200,6 +194,7 @@ static void __init omap3logic_init(void) omap3torpedo_fix_pbias_voltage(); omap3logic_i2c_init(); omap_serial_init(); + omap_sdrc_init(NULL, NULL); board_mmc_init(); board_smsc911x_init(); @@ -211,7 +206,7 @@ static void __init omap3logic_init(void) MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board") .atag_offset = 0x100, .map_io = omap3_map_io, - .init_early = omap3logic_init_early, + .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, .init_machine = omap3logic_init, .timer = &omap3_timer, @@ -220,7 +215,7 @@ MACHINE_END MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board") .atag_offset = 0x100, .map_io = omap3_map_io, - .init_early = omap3logic_init_early, + .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, .init_machine = omap3logic_init, .timer = &omap3_timer, diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index ace56938dd3..fed2f7dfdf8 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -525,13 +525,6 @@ static struct spi_board_info omap3pandora_spi_board_info[] __initdata = { } }; -static void __init omap3pandora_init_early(void) -{ - omap2_init_common_infrastructure(); - omap2_init_common_devices(mt46h32m32lf6_sdrc_params, - mt46h32m32lf6_sdrc_params); -} - static void __init pandora_wl1251_init(void) { struct wl12xx_platform_data pandora_wl1251_pdata; @@ -593,6 +586,8 @@ static void __init omap3pandora_init(void) ARRAY_SIZE(omap3pandora_devices)); omap_display_init(&pandora_dss_data); omap_serial_init(); + omap_sdrc_init(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); spi_register_board_info(omap3pandora_spi_board_info, ARRAY_SIZE(omap3pandora_spi_board_info)); omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL); @@ -609,7 +604,7 @@ MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console") .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, - .init_early = omap3pandora_init_early, + .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, .init_machine = omap3pandora_init, .timer = &omap3_timer, diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index ba13e1d5d0a..170e1ebd6e6 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -428,17 +428,6 @@ static int __init omap3_stalker_i2c_init(void) static struct omap_board_config_kernel omap3_stalker_config[] __initdata = { }; -static void __init omap3_stalker_init_early(void) -{ - omap2_init_common_infrastructure(); - omap2_init_common_devices(mt46h32m32lf6_sdrc_params, NULL); -} - -static void __init omap3_stalker_init_irq(void) -{ - omap3_init_irq(); -} - static struct platform_device *omap3_stalker_devices[] __initdata = { &keys_gpio, }; @@ -478,6 +467,7 @@ static void __init omap3_stalker_init(void) omap_display_init(&omap3_stalker_dss_data); omap_serial_init(); + omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL); usb_musb_init(NULL); usbhs_init(&usbhs_bdata); omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL); @@ -496,8 +486,8 @@ MACHINE_START(SBC3530, "OMAP3 STALKER") /* Maintainer: Jason Lam -lzg@ema-tech.com */ .atag_offset = 0x100, .map_io = omap3_map_io, - .init_early = omap3_stalker_init_early, - .init_irq = omap3_stalker_init_irq, + .init_early = omap35xx_init_early, + .init_irq = omap3_init_irq, .init_machine = omap3_stalker_init, .timer = &omap3_secure_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 49e4bd207cb..c2d5348f542 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -326,18 +326,6 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static void __init omap3_touchbook_init_early(void) -{ - omap2_init_common_infrastructure(); - omap2_init_common_devices(mt46h32m32lf6_sdrc_params, - mt46h32m32lf6_sdrc_params); -} - -static void __init omap3_touchbook_init_irq(void) -{ - omap3_init_irq(); -} - static struct platform_device *omap3_touchbook_devices[] __initdata = { &omap3_touchbook_lcd_device, &leds_gpio, @@ -385,6 +373,8 @@ static void __init omap3_touchbook_init(void) platform_add_devices(omap3_touchbook_devices, ARRAY_SIZE(omap3_touchbook_devices)); omap_serial_init(); + omap_sdrc_init(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); omap_mux_init_gpio(170, OMAP_PIN_INPUT); /* REVISIT leave DVI powered down until it's needed ... */ @@ -407,8 +397,8 @@ MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board") .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, - .init_early = omap3_touchbook_init_early, - .init_irq = omap3_touchbook_init_irq, + .init_early = omap3430_init_early, + .init_irq = omap3_init_irq, .init_machine = omap3_touchbook_init, .timer = &omap3_secure_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 683bede73d5..2141894eb9f 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -95,12 +95,6 @@ static struct platform_device *panda_devices[] __initdata = { &wl1271_device, }; -static void __init omap4_panda_init_early(void) -{ - omap2_init_common_infrastructure(); - omap2_init_common_devices(NULL, NULL); -} - static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, @@ -569,24 +563,19 @@ static void __init omap4_panda_init(void) platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices)); platform_device_register(&omap_vwlan_device); board_serial_init(); + omap_sdrc_init(NULL, NULL); omap4_twl6030_hsmmc_init(mmc); omap4_ehci_init(); usb_musb_init(&musb_board_data); omap4_panda_display_init(); } -static void __init omap4_panda_map_io(void) -{ - omap2_set_globals_443x(); - omap44xx_map_common_io(); -} - MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board") /* Maintainer: David Anders - Texas Instruments Inc */ .atag_offset = 0x100, .reserve = omap_reserve, - .map_io = omap4_panda_map_io, - .init_early = omap4_panda_init_early, + .map_io = omap4_map_io, + .init_early = omap4430_init_early, .init_irq = gic_init_irq, .init_machine = omap4_panda_init, .timer = &omap4_timer, diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index e592fb134c4..9f13dc22df7 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -478,13 +478,6 @@ static int __init overo_spi_init(void) return 0; } -static void __init overo_init_early(void) -{ - omap2_init_common_infrastructure(); - omap2_init_common_devices(mt46h32m32lf6_sdrc_params, - mt46h32m32lf6_sdrc_params); -} - static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, @@ -514,6 +507,8 @@ static void __init overo_init(void) overo_i2c_init(); omap_display_init(&overo_dss_data); omap_serial_init(); + omap_sdrc_init(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); omap_nand_flash_init(0, overo_nand_partitions, ARRAY_SIZE(overo_nand_partitions)); usb_musb_init(NULL); @@ -564,7 +559,7 @@ MACHINE_START(OVERO, "Gumstix Overo") .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, - .init_early = overo_init_early, + .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, .init_machine = overo_init, .timer = &omap3_timer, diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index 9a8ce239ba9..616fb39763b 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -123,15 +123,6 @@ static void __init rm680_peripherals_init(void) omap2_hsmmc_init(mmc); } -static void __init rm680_init_early(void) -{ - struct omap_sdrc_params *sdrc_params; - - omap2_init_common_infrastructure(); - sdrc_params = nokia_get_sdram_timings(); - omap2_init_common_devices(sdrc_params, sdrc_params); -} - #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, @@ -140,23 +131,23 @@ static struct omap_board_mux board_mux[] __initdata = { static void __init rm680_init(void) { + struct omap_sdrc_params *sdrc_params; + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_serial_init(); + + sdrc_params = nokia_get_sdram_timings(); + omap_sdrc_init(sdrc_params, sdrc_params); + usb_musb_init(NULL); rm680_peripherals_init(); } -static void __init rm680_map_io(void) -{ - omap2_set_globals_3xxx(); - omap34xx_map_common_io(); -} - MACHINE_START(NOKIA_RM680, "Nokia RM-680 board") .atag_offset = 0x100, .reserve = omap_reserve, - .map_io = rm680_map_io, - .init_early = rm680_init_early, + .map_io = omap3_map_io, + .init_early = omap3630_init_early, .init_irq = omap3_init_irq, .init_machine = rm680_init, .timer = &omap3_timer, diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index a6c473bbb3d..74c8aadc0a1 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -102,15 +102,6 @@ static struct omap_board_config_kernel rx51_config[] = { { OMAP_TAG_LCD, &rx51_lcd_config }, }; -static void __init rx51_init_early(void) -{ - struct omap_sdrc_params *sdrc_params; - - omap2_init_common_infrastructure(); - sdrc_params = nokia_get_sdram_timings(); - omap2_init_common_devices(sdrc_params, sdrc_params); -} - extern void __init rx51_peripherals_init(void); #ifdef CONFIG_OMAP_MUX @@ -127,11 +118,17 @@ static struct omap_musb_board_data musb_board_data = { static void __init rx51_init(void) { + struct omap_sdrc_params *sdrc_params; + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_board_config = rx51_config; omap_board_config_size = ARRAY_SIZE(rx51_config); omap3_pm_init_cpuidle(rx51_cpuidle_params); omap_serial_init(); + + sdrc_params = nokia_get_sdram_timings(); + omap_sdrc_init(sdrc_params, sdrc_params); + usb_musb_init(&musb_board_data); rx51_peripherals_init(); @@ -142,12 +139,6 @@ static void __init rx51_init(void) platform_device_register(&leds_gpio); } -static void __init rx51_map_io(void) -{ - omap2_set_globals_3xxx(); - omap34xx_map_common_io(); -} - static void __init rx51_reserve(void) { rx51_video_mem_init(); @@ -158,8 +149,8 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") /* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */ .atag_offset = 0x100, .reserve = rx51_reserve, - .map_io = rx51_map_io, - .init_early = rx51_init_early, + .map_io = omap3_map_io, + .init_early = omap3430_init_early, .init_irq = omap3_init_irq, .init_machine = rx51_init, .timer = &omap3_timer, diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c index e41958acb6b..e6ee8842285 100644 --- a/arch/arm/mach-omap2/board-ti8168evm.c +++ b/arch/arm/mach-omap2/board-ti8168evm.c @@ -27,22 +27,16 @@ static struct omap_board_config_kernel ti8168_evm_config[] __initdata = { }; -static void __init ti8168_init_early(void) -{ - omap2_init_common_infrastructure(); - omap2_init_common_devices(NULL, NULL); -} - static void __init ti8168_evm_init(void) { omap_serial_init(); + omap_sdrc_init(NULL, NULL); omap_board_config = ti8168_evm_config; omap_board_config_size = ARRAY_SIZE(ti8168_evm_config); } static void __init ti8168_evm_map_io(void) { - omap2_set_globals_ti816x(); omapti816x_map_common_io(); } @@ -50,7 +44,7 @@ MACHINE_START(TI8168EVM, "ti8168evm") /* Maintainer: Texas Instruments */ .atag_offset = 0x100, .map_io = ti8168_evm_map_io, - .init_early = ti8168_init_early, + .init_early = ti816x_init_early, .init_irq = ti816x_init_irq, .timer = &omap3_timer, .init_machine = ti8168_evm_init, diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index 72f1db4863e..be6684dc4f5 100644 --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c @@ -34,17 +34,6 @@ #define ZOOM3_EHCI_RESET_GPIO 64 -static void __init omap_zoom_init_early(void) -{ - omap2_init_common_infrastructure(); - if (machine_is_omap_zoom2()) - omap2_init_common_devices(mt46h32m32lf6_sdrc_params, - mt46h32m32lf6_sdrc_params); - else if (machine_is_omap_zoom3()) - omap2_init_common_devices(h8mbx00u0mer0em_sdrc_params, - h8mbx00u0mer0em_sdrc_params); -} - #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { /* WLAN IRQ - GPIO 162 */ @@ -129,6 +118,14 @@ static void __init omap_zoom_init(void) ZOOM_NAND_CS, NAND_BUSWIDTH_16); zoom_debugboard_init(); zoom_peripherals_init(); + + if (machine_is_omap_zoom2()) + omap_sdrc_init(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); + else if (machine_is_omap_zoom3()) + omap_sdrc_init(h8mbx00u0mer0em_sdrc_params, + h8mbx00u0mer0em_sdrc_params); + zoom_display_init(); } @@ -136,7 +133,7 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, - .init_early = omap_zoom_init_early, + .init_early = omap3430_init_early, .init_irq = omap3_init_irq, .init_machine = omap_zoom_init, .timer = &omap3_timer, @@ -146,7 +143,7 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board") .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, - .init_early = omap_zoom_init_early, + .init_early = omap3630_init_early, .init_irq = omap3_init_irq, .init_machine = omap_zoom_init, .timer = &omap3_timer, diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c index debc040872f..14a6277dd18 100644 --- a/arch/arm/mach-omap2/clock2420_data.c +++ b/arch/arm/mach-omap2/clock2420_data.c @@ -1898,6 +1898,54 @@ static struct omap_clk omap2420_clks[] = { CLK(NULL, "pka_ick", &pka_ick, CK_242X), CLK(NULL, "usb_fck", &usb_fck, CK_242X), CLK("musb-hdrc", "fck", &osc_ck, CK_242X), + CLK("omap_timer.1", "fck", &gpt1_fck, CK_242X), + CLK("omap_timer.2", "fck", &gpt2_fck, CK_242X), + CLK("omap_timer.3", "fck", &gpt3_fck, CK_242X), + CLK("omap_timer.4", "fck", &gpt4_fck, CK_242X), + CLK("omap_timer.5", "fck", &gpt5_fck, CK_242X), + CLK("omap_timer.6", "fck", &gpt6_fck, CK_242X), + CLK("omap_timer.7", "fck", &gpt7_fck, CK_242X), + CLK("omap_timer.8", "fck", &gpt8_fck, CK_242X), + CLK("omap_timer.9", "fck", &gpt9_fck, CK_242X), + CLK("omap_timer.10", "fck", &gpt10_fck, CK_242X), + CLK("omap_timer.11", "fck", &gpt11_fck, CK_242X), + CLK("omap_timer.12", "fck", &gpt12_fck, CK_242X), + CLK("omap_timer.1", "32k_ck", &func_32k_ck, CK_243X), + CLK("omap_timer.2", "32k_ck", &func_32k_ck, CK_243X), + CLK("omap_timer.3", "32k_ck", &func_32k_ck, CK_243X), + CLK("omap_timer.4", "32k_ck", &func_32k_ck, CK_243X), + CLK("omap_timer.5", "32k_ck", &func_32k_ck, CK_243X), + CLK("omap_timer.6", "32k_ck", &func_32k_ck, CK_243X), + CLK("omap_timer.7", "32k_ck", &func_32k_ck, CK_243X), + CLK("omap_timer.8", "32k_ck", &func_32k_ck, CK_243X), + CLK("omap_timer.9", "32k_ck", &func_32k_ck, CK_243X), + CLK("omap_timer.10", "32k_ck", &func_32k_ck, CK_243X), + CLK("omap_timer.11", "32k_ck", &func_32k_ck, CK_243X), + CLK("omap_timer.12", "32k_ck", &func_32k_ck, CK_243X), + CLK("omap_timer.1", "sys_ck", &sys_ck, CK_243X), + CLK("omap_timer.2", "sys_ck", &sys_ck, CK_243X), + CLK("omap_timer.3", "sys_ck", &sys_ck, CK_243X), + CLK("omap_timer.4", "sys_ck", &sys_ck, CK_243X), + CLK("omap_timer.5", "sys_ck", &sys_ck, CK_243X), + CLK("omap_timer.6", "sys_ck", &sys_ck, CK_243X), + CLK("omap_timer.7", "sys_ck", &sys_ck, CK_243X), + CLK("omap_timer.8", "sys_ck", &sys_ck, CK_243X), + CLK("omap_timer.9", "sys_ck", &sys_ck, CK_243X), + CLK("omap_timer.10", "sys_ck", &sys_ck, CK_243X), + CLK("omap_timer.11", "sys_ck", &sys_ck, CK_243X), + CLK("omap_timer.12", "sys_ck", &sys_ck, CK_243X), + CLK("omap_timer.1", "alt_ck", &alt_ck, CK_243X), + CLK("omap_timer.2", "alt_ck", &alt_ck, CK_243X), + CLK("omap_timer.3", "alt_ck", &alt_ck, CK_243X), + CLK("omap_timer.4", "alt_ck", &alt_ck, CK_243X), + CLK("omap_timer.5", "alt_ck", &alt_ck, CK_243X), + CLK("omap_timer.6", "alt_ck", &alt_ck, CK_243X), + CLK("omap_timer.7", "alt_ck", &alt_ck, CK_243X), + CLK("omap_timer.8", "alt_ck", &alt_ck, CK_243X), + CLK("omap_timer.9", "alt_ck", &alt_ck, CK_243X), + CLK("omap_timer.10", "alt_ck", &alt_ck, CK_243X), + CLK("omap_timer.11", "alt_ck", &alt_ck, CK_243X), + CLK("omap_timer.12", "alt_ck", &alt_ck, CK_243X), }; /* diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c index 96a942e42db..ea6717cfa3c 100644 --- a/arch/arm/mach-omap2/clock2430_data.c +++ b/arch/arm/mach-omap2/clock2430_data.c @@ -1998,6 +1998,54 @@ static struct omap_clk omap2430_clks[] = { CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X), CLK("omap_hsmmc.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X), CLK("omap_hsmmc.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X), + CLK("omap_timer.1", "fck", &gpt1_fck, CK_243X), + CLK("omap_timer.2", "fck", &gpt2_fck, CK_243X), + CLK("omap_timer.3", "fck", &gpt3_fck, CK_243X), + CLK("omap_timer.4", "fck", &gpt4_fck, CK_243X), + CLK("omap_timer.5", "fck", &gpt5_fck, CK_243X), + CLK("omap_timer.6", "fck", &gpt6_fck, CK_243X), + CLK("omap_timer.7", "fck", &gpt7_fck, CK_243X), + CLK("omap_timer.8", "fck", &gpt8_fck, CK_243X), + CLK("omap_timer.9", "fck", &gpt9_fck, CK_243X), + CLK("omap_timer.10", "fck", &gpt10_fck, CK_243X), + CLK("omap_timer.11", "fck", &gpt11_fck, CK_243X), + CLK("omap_timer.12", "fck", &gpt12_fck, CK_243X), + CLK("omap_timer.1", "32k_ck", &func_32k_ck, CK_243X), + CLK("omap_timer.2", "32k_ck", &func_32k_ck, CK_243X), + CLK("omap_timer.3", "32k_ck", &func_32k_ck, CK_243X), + CLK("omap_timer.4", "32k_ck", &func_32k_ck, CK_243X), + CLK("omap_timer.5", "32k_ck", &func_32k_ck, CK_243X), + CLK("omap_timer.6", "32k_ck", &func_32k_ck, CK_243X), + CLK("omap_timer.7", "32k_ck", &func_32k_ck, CK_243X), + CLK("omap_timer.8", "32k_ck", &func_32k_ck, CK_243X), + CLK("omap_timer.9", "32k_ck", &func_32k_ck, CK_243X), + CLK("omap_timer.10", "32k_ck", &func_32k_ck, CK_243X), + CLK("omap_timer.11", "32k_ck", &func_32k_ck, CK_243X), + CLK("omap_timer.12", "32k_ck", &func_32k_ck, CK_243X), + CLK("omap_timer.1", "sys_ck", &sys_ck, CK_243X), + CLK("omap_timer.2", "sys_ck", &sys_ck, CK_243X), + CLK("omap_timer.3", "sys_ck", &sys_ck, CK_243X), + CLK("omap_timer.4", "sys_ck", &sys_ck, CK_243X), + CLK("omap_timer.5", "sys_ck", &sys_ck, CK_243X), + CLK("omap_timer.6", "sys_ck", &sys_ck, CK_243X), + CLK("omap_timer.7", "sys_ck", &sys_ck, CK_243X), + CLK("omap_timer.8", "sys_ck", &sys_ck, CK_243X), + CLK("omap_timer.9", "sys_ck", &sys_ck, CK_243X), + CLK("omap_timer.10", "sys_ck", &sys_ck, CK_243X), + CLK("omap_timer.11", "sys_ck", &sys_ck, CK_243X), + CLK("omap_timer.12", "sys_ck", &sys_ck, CK_243X), + CLK("omap_timer.1", "alt_ck", &alt_ck, CK_243X), + CLK("omap_timer.2", "alt_ck", &alt_ck, CK_243X), + CLK("omap_timer.3", "alt_ck", &alt_ck, CK_243X), + CLK("omap_timer.4", "alt_ck", &alt_ck, CK_243X), + CLK("omap_timer.5", "alt_ck", &alt_ck, CK_243X), + CLK("omap_timer.6", "alt_ck", &alt_ck, CK_243X), + CLK("omap_timer.7", "alt_ck", &alt_ck, CK_243X), + CLK("omap_timer.8", "alt_ck", &alt_ck, CK_243X), + CLK("omap_timer.9", "alt_ck", &alt_ck, CK_243X), + CLK("omap_timer.10", "alt_ck", &alt_ck, CK_243X), + CLK("omap_timer.11", "alt_ck", &alt_ck, CK_243X), + CLK("omap_timer.12", "alt_ck", &alt_ck, CK_243X), }; /* diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index ffd55b1c439..65dd363163b 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3078,6 +3078,7 @@ static struct clk gpt12_fck = { .name = "gpt12_fck", .ops = &clkops_null, .parent = &secure_32k_fck, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -3085,6 +3086,7 @@ static struct clk wdt1_fck = { .name = "wdt1_fck", .ops = &clkops_null, .parent = &secure_32k_fck, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -3462,6 +3464,42 @@ static struct omap_clk omap3xxx_clks[] = { CLK("musb-am35x", "fck", &hsotgusb_fck_am35xx, CK_AM35XX), CLK(NULL, "hecc_ck", &hecc_ck, CK_AM35XX), CLK(NULL, "uart4_ick", &uart4_ick_am35xx, CK_AM35XX), + CLK("omap_timer.1", "fck", &gpt1_fck, CK_3XXX), + CLK("omap_timer.2", "fck", &gpt2_fck, CK_3XXX), + CLK("omap_timer.3", "fck", &gpt3_fck, CK_3XXX), + CLK("omap_timer.4", "fck", &gpt4_fck, CK_3XXX), + CLK("omap_timer.5", "fck", &gpt5_fck, CK_3XXX), + CLK("omap_timer.6", "fck", &gpt6_fck, CK_3XXX), + CLK("omap_timer.7", "fck", &gpt7_fck, CK_3XXX), + CLK("omap_timer.8", "fck", &gpt8_fck, CK_3XXX), + CLK("omap_timer.9", "fck", &gpt9_fck, CK_3XXX), + CLK("omap_timer.10", "fck", &gpt10_fck, CK_3XXX), + CLK("omap_timer.11", "fck", &gpt11_fck, CK_3XXX), + CLK("omap_timer.12", "fck", &gpt12_fck, CK_3XXX), + CLK("omap_timer.1", "32k_ck", &omap_32k_fck, CK_3XXX), + CLK("omap_timer.2", "32k_ck", &omap_32k_fck, CK_3XXX), + CLK("omap_timer.3", "32k_ck", &omap_32k_fck, CK_3XXX), + CLK("omap_timer.4", "32k_ck", &omap_32k_fck, CK_3XXX), + CLK("omap_timer.5", "32k_ck", &omap_32k_fck, CK_3XXX), + CLK("omap_timer.6", "32k_ck", &omap_32k_fck, CK_3XXX), + CLK("omap_timer.7", "32k_ck", &omap_32k_fck, CK_3XXX), + CLK("omap_timer.8", "32k_ck", &omap_32k_fck, CK_3XXX), + CLK("omap_timer.9", "32k_ck", &omap_32k_fck, CK_3XXX), + CLK("omap_timer.10", "32k_ck", &omap_32k_fck, CK_3XXX), + CLK("omap_timer.11", "32k_ck", &omap_32k_fck, CK_3XXX), + CLK("omap_timer.12", "32k_ck", &omap_32k_fck, CK_3XXX), + CLK("omap_timer.1", "sys_ck", &sys_ck, CK_3XXX), + CLK("omap_timer.2", "sys_ck", &sys_ck, CK_3XXX), + CLK("omap_timer.3", "sys_ck", &sys_ck, CK_3XXX), + CLK("omap_timer.4", "sys_ck", &sys_ck, CK_3XXX), + CLK("omap_timer.5", "sys_ck", &sys_ck, CK_3XXX), + CLK("omap_timer.6", "sys_ck", &sys_ck, CK_3XXX), + CLK("omap_timer.7", "sys_ck", &sys_ck, CK_3XXX), + CLK("omap_timer.8", "sys_ck", &sys_ck, CK_3XXX), + CLK("omap_timer.9", "sys_ck", &sys_ck, CK_3XXX), + CLK("omap_timer.10", "sys_ck", &sys_ck, CK_3XXX), + CLK("omap_timer.11", "sys_ck", &sys_ck, CK_3XXX), + CLK("omap_timer.12", "sys_ck", &sys_ck, CK_3XXX), }; @@ -3470,7 +3508,16 @@ int __init omap3xxx_clk_init(void) struct omap_clk *c; u32 cpu_clkflg = 0; - if (cpu_is_omap3517()) { + /* + * 3505 must be tested before 3517, since 3517 returns true + * for both AM3517 chips and AM3517 family chips, which + * includes 3505. Unfortunately there's no obvious family + * test for 3517/3505 :-( + */ + if (cpu_is_omap3505()) { + cpu_mask = RATE_IN_34XX; + cpu_clkflg = CK_3505; + } else if (cpu_is_omap3517()) { cpu_mask = RATE_IN_34XX; cpu_clkflg = CK_3517; } else if (cpu_is_omap3505()) { diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 2af0e3f00ce..946bf04a956 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -3363,6 +3363,39 @@ static struct omap_clk omap44xx_clks[] = { CLK("usbhs-omap.0", "usbhost_ick", &dummy_ck, CK_443X), CLK("usbhs-omap.0", "usbtll_fck", &dummy_ck, CK_443X), CLK("omap_wdt", "ick", &dummy_ck, CK_443X), + CLK("omap_timer.1", "fck", &timer1_fck, CK_443X), + CLK("omap_timer.2", "fck", &timer2_fck, CK_443X), + CLK("omap_timer.3", "fck", &timer3_fck, CK_443X), + CLK("omap_timer.4", "fck", &timer4_fck, CK_443X), + CLK("omap_timer.5", "fck", &timer5_fck, CK_443X), + CLK("omap_timer.6", "fck", &timer6_fck, CK_443X), + CLK("omap_timer.7", "fck", &timer7_fck, CK_443X), + CLK("omap_timer.8", "fck", &timer8_fck, CK_443X), + CLK("omap_timer.9", "fck", &timer9_fck, CK_443X), + CLK("omap_timer.10", "fck", &timer10_fck, CK_443X), + CLK("omap_timer.11", "fck", &timer11_fck, CK_443X), + CLK("omap_timer.1", "32k_ck", &sys_32k_ck, CK_443X), + CLK("omap_timer.2", "32k_ck", &sys_32k_ck, CK_443X), + CLK("omap_timer.3", "32k_ck", &sys_32k_ck, CK_443X), + CLK("omap_timer.4", "32k_ck", &sys_32k_ck, CK_443X), + CLK("omap_timer.5", "32k_ck", &sys_32k_ck, CK_443X), + CLK("omap_timer.6", "32k_ck", &sys_32k_ck, CK_443X), + CLK("omap_timer.7", "32k_ck", &sys_32k_ck, CK_443X), + CLK("omap_timer.8", "32k_ck", &sys_32k_ck, CK_443X), + CLK("omap_timer.9", "32k_ck", &sys_32k_ck, CK_443X), + CLK("omap_timer.10", "32k_ck", &sys_32k_ck, CK_443X), + CLK("omap_timer.11", "32k_ck", &sys_32k_ck, CK_443X), + CLK("omap_timer.1", "sys_ck", &sys_clkin_ck, CK_443X), + CLK("omap_timer.2", "sys_ck", &sys_clkin_ck, CK_443X), + CLK("omap_timer.3", "sys_ck", &sys_clkin_ck, CK_443X), + CLK("omap_timer.4", "sys_ck", &sys_clkin_ck, CK_443X), + CLK("omap_timer.9", "sys_ck", &sys_clkin_ck, CK_443X), + CLK("omap_timer.10", "sys_ck", &sys_clkin_ck, CK_443X), + CLK("omap_timer.11", "sys_ck", &sys_clkin_ck, CK_443X), + CLK("omap_timer.5", "sys_ck", &syc_clk_div_ck, CK_443X), + CLK("omap_timer.6", "sys_ck", &syc_clk_div_ck, CK_443X), + CLK("omap_timer.7", "sys_ck", &syc_clk_div_ck, CK_443X), + CLK("omap_timer.8", "sys_ck", &syc_clk_div_ck, CK_443X), }; int __init omap4xxx_clk_init(void) @@ -3376,10 +3409,18 @@ int __init omap4xxx_clk_init(void) } else if (cpu_is_omap446x()) { cpu_mask = RATE_IN_4460; cpu_clkflg = CK_446X; + } else { + return 0; } clk_init(&omap2_clk_functions); - omap2_clk_disable_clkdm_control(); + + /* + * Must stay commented until all OMAP SoC drivers are + * converted to runtime PM, or drivers may start crashing + * + * omap2_clk_disable_clkdm_control(); + */ for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks); c++) diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index ab7db083f97..8480ee4344e 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -73,9 +73,6 @@ static int _clkdm_register(struct clockdomain *clkdm) if (!clkdm || !clkdm->name) return -EINVAL; - if (!omap_chip_is(clkdm->omap_chip)) - return -EINVAL; - pwrdm = pwrdm_lookup(clkdm->pwrdm.name); if (!pwrdm) { pr_err("clockdomain: %s: powerdomain %s does not exist\n", @@ -105,13 +102,10 @@ static struct clkdm_dep *_clkdm_deps_lookup(struct clockdomain *clkdm, { struct clkdm_dep *cd; - if (!clkdm || !deps || !omap_chip_is(clkdm->omap_chip)) + if (!clkdm || !deps) return ERR_PTR(-EINVAL); for (cd = deps; cd->clkdm_name; cd++) { - if (!omap_chip_is(cd->omap_chip)) - continue; - if (!cd->clkdm && cd->clkdm_name) cd->clkdm = _clkdm_lookup(cd->clkdm_name); @@ -148,9 +142,6 @@ static void _autodep_lookup(struct clkdm_autodep *autodep) if (!autodep) return; - if (!omap_chip_is(autodep->omap_chip)) - return; - clkdm = clkdm_lookup(autodep->clkdm.name); if (!clkdm) { pr_err("clockdomain: autodeps: clockdomain %s does not exist\n", @@ -182,9 +173,6 @@ void _clkdm_add_autodeps(struct clockdomain *clkdm) if (IS_ERR(autodep->clkdm.ptr)) continue; - if (!omap_chip_is(autodep->omap_chip)) - continue; - pr_debug("clockdomain: adding %s sleepdep/wkdep for " "clkdm %s\n", autodep->clkdm.ptr->name, clkdm->name); @@ -216,9 +204,6 @@ void _clkdm_del_autodeps(struct clockdomain *clkdm) if (IS_ERR(autodep->clkdm.ptr)) continue; - if (!omap_chip_is(autodep->omap_chip)) - continue; - pr_debug("clockdomain: removing %s sleepdep/wkdep for " "clkdm %s\n", autodep->clkdm.ptr->name, clkdm->name); @@ -243,8 +228,6 @@ static void _resolve_clkdm_deps(struct clockdomain *clkdm, struct clkdm_dep *cd; for (cd = clkdm_deps; cd && cd->clkdm_name; cd++) { - if (!omap_chip_is(cd->omap_chip)) - continue; if (cd->clkdm) continue; cd->clkdm = _clkdm_lookup(cd->clkdm_name); @@ -257,43 +240,113 @@ static void _resolve_clkdm_deps(struct clockdomain *clkdm, /* Public functions */ /** - * clkdm_init - set up the clockdomain layer - * @clkdms: optional pointer to an array of clockdomains to register - * @init_autodeps: optional pointer to an array of autodeps to register - * @custom_funcs: func pointers for arch specific implementations - * - * Set up internal state. If a pointer to an array of clockdomains - * @clkdms was supplied, loop through the list of clockdomains, - * register all that are available on the current platform. Similarly, - * if a pointer to an array of clockdomain autodependencies - * @init_autodeps was provided, register those. No return value. + * clkdm_register_platform_funcs - register clockdomain implementation fns + * @co: func pointers for arch specific implementations + * + * Register the list of function pointers used to implement the + * clockdomain functions on different OMAP SoCs. Should be called + * before any other clkdm_register*() function. Returns -EINVAL if + * @co is null, -EEXIST if platform functions have already been + * registered, or 0 upon success. + */ +int clkdm_register_platform_funcs(struct clkdm_ops *co) +{ + if (!co) + return -EINVAL; + + if (arch_clkdm) + return -EEXIST; + + arch_clkdm = co; + + return 0; +}; + +/** + * clkdm_register_clkdms - register SoC clockdomains + * @cs: pointer to an array of struct clockdomain to register + * + * Register the clockdomains available on a particular OMAP SoC. Must + * be called after clkdm_register_platform_funcs(). May be called + * multiple times. Returns -EACCES if called before + * clkdm_register_platform_funcs(); -EINVAL if the argument @cs is + * null; or 0 upon success. */ -void clkdm_init(struct clockdomain **clkdms, - struct clkdm_autodep *init_autodeps, - struct clkdm_ops *custom_funcs) +int clkdm_register_clkdms(struct clockdomain **cs) { struct clockdomain **c = NULL; - struct clockdomain *clkdm; - struct clkdm_autodep *autodep = NULL; - if (!custom_funcs) - WARN(1, "No custom clkdm functions registered\n"); - else - arch_clkdm = custom_funcs; + if (!arch_clkdm) + return -EACCES; + + if (!cs) + return -EINVAL; + + for (c = cs; *c; c++) + _clkdm_register(*c); + + return 0; +} + +/** + * clkdm_register_autodeps - register autodeps (if required) + * @ia: pointer to a static array of struct clkdm_autodep to register + * + * Register clockdomain "automatic dependencies." These are + * clockdomain wakeup and sleep dependencies that are automatically + * added whenever the first clock inside a clockdomain is enabled, and + * removed whenever the last clock inside a clockdomain is disabled. + * These are currently only used on OMAP3 devices, and are deprecated, + * since they waste energy. However, until the OMAP2/3 IP block + * enable/disable sequence can be converted to match the OMAP4 + * sequence, they are needed. + * + * Must be called only after all of the SoC clockdomains are + * registered, since the function will resolve autodep clockdomain + * names into clockdomain pointers. + * + * The struct clkdm_autodep @ia array must be static, as this function + * does not copy the array elements. + * + * Returns -EACCES if called before any clockdomains have been + * registered, -EINVAL if called with a null @ia argument, -EEXIST if + * autodeps have already been registered, or 0 upon success. + */ +int clkdm_register_autodeps(struct clkdm_autodep *ia) +{ + struct clkdm_autodep *a = NULL; - if (clkdms) - for (c = clkdms; *c; c++) - _clkdm_register(*c); + if (list_empty(&clkdm_list)) + return -EACCES; + + if (!ia) + return -EINVAL; - autodeps = init_autodeps; if (autodeps) - for (autodep = autodeps; autodep->clkdm.ptr; autodep++) - _autodep_lookup(autodep); + return -EEXIST; + + autodeps = ia; + for (a = autodeps; a->clkdm.ptr; a++) + _autodep_lookup(a); + + return 0; +} + +/** + * clkdm_complete_init - set up the clockdomain layer + * + * Put all clockdomains into software-supervised mode; PM code should + * later enable hardware-supervised mode as appropriate. Must be + * called after clkdm_register_clkdms(). Returns -EACCES if called + * before clkdm_register_clkdms(), or 0 upon success. + */ +int clkdm_complete_init(void) +{ + struct clockdomain *clkdm; + + if (list_empty(&clkdm_list)) + return -EACCES; - /* - * Put all clockdomains into software-supervised mode; PM code - * should later enable hardware-supervised mode as appropriate - */ list_for_each_entry(clkdm, &clkdm_list, node) { if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) clkdm_wakeup(clkdm); @@ -306,6 +359,8 @@ void clkdm_init(struct clockdomain **clkdms, _resolve_clkdm_deps(clkdm, clkdm->sleepdep_srcs); clkdm_clear_all_sleepdeps(clkdm); } + + return 0; } /** @@ -747,6 +802,7 @@ int clkdm_wakeup(struct clockdomain *clkdm) spin_lock_irqsave(&clkdm->lock, flags); clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED; ret = arch_clkdm->clkdm_wakeup(clkdm); + ret |= pwrdm_state_switch(clkdm->pwrdm.ptr); spin_unlock_irqrestore(&clkdm->lock, flags); return ret; } @@ -818,6 +874,7 @@ void clkdm_deny_idle(struct clockdomain *clkdm) spin_lock_irqsave(&clkdm->lock, flags); clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED; arch_clkdm->clkdm_deny_idle(clkdm); + pwrdm_state_switch(clkdm->pwrdm.ptr); spin_unlock_irqrestore(&clkdm->lock, flags); } diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index 1e50c88b8a0..f7b58609bad 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -45,7 +45,6 @@ /** * struct clkdm_autodep - clkdm deps to add when entering/exiting hwsup mode * @clkdm: clockdomain to add wkdep+sleepdep on - set name member only - * @omap_chip: OMAP chip types that this autodep is valid on * * A clockdomain that should have wkdeps and sleepdeps added when a * clockdomain should stay active in hwsup mode; and conversely, @@ -60,14 +59,12 @@ struct clkdm_autodep { const char *name; struct clockdomain *ptr; } clkdm; - const struct omap_chip_id omap_chip; }; /** * struct clkdm_dep - encode dependencies between clockdomains * @clkdm_name: clockdomain name * @clkdm: pointer to the struct clockdomain of @clkdm_name - * @omap_chip: OMAP chip types that this dependency is valid on * @wkdep_usecount: Number of wakeup dependencies causing this clkdm to wake * @sleepdep_usecount: Number of sleep deps that could prevent clkdm from idle * @@ -81,7 +78,6 @@ struct clkdm_dep { struct clockdomain *clkdm; atomic_t wkdep_usecount; atomic_t sleepdep_usecount; - const struct omap_chip_id omap_chip; }; /* Possible flags for struct clockdomain._flags */ @@ -101,7 +97,6 @@ struct clkdm_dep { * @clkdm_offs: (OMAP4 only) CM clockdomain register offset * @wkdep_srcs: Clockdomains that can be told to wake this powerdomain up * @sleepdep_srcs: Clockdomains that can be told to keep this clkdm from inact - * @omap_chip: OMAP chip types that this clockdomain is valid on * @usecount: Usecount tracking * @node: list_head to link all clockdomains together * @@ -126,7 +121,6 @@ struct clockdomain { const u16 clkdm_offs; struct clkdm_dep *wkdep_srcs; struct clkdm_dep *sleepdep_srcs; - const struct omap_chip_id omap_chip; atomic_t usecount; struct list_head node; spinlock_t lock; @@ -166,8 +160,11 @@ struct clkdm_ops { int (*clkdm_clk_disable)(struct clockdomain *clkdm); }; -void clkdm_init(struct clockdomain **clkdms, struct clkdm_autodep *autodeps, - struct clkdm_ops *custom_funcs); +int clkdm_register_platform_funcs(struct clkdm_ops *co); +int clkdm_register_autodeps(struct clkdm_autodep *ia); +int clkdm_register_clkdms(struct clockdomain **c); +int clkdm_complete_init(void); + struct clockdomain *clkdm_lookup(const char *name); int clkdm_for_each(int (*fn)(struct clockdomain *clkdm, void *user), @@ -195,7 +192,8 @@ int clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk); int clkdm_hwmod_enable(struct clockdomain *clkdm, struct omap_hwmod *oh); int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh); -extern void __init omap2xxx_clockdomains_init(void); +extern void __init omap242x_clockdomains_init(void); +extern void __init omap243x_clockdomains_init(void); extern void __init omap3xxx_clockdomains_init(void); extern void __init omap44xx_clockdomains_init(void); extern void _clkdm_add_autodeps(struct clockdomain *clkdm); @@ -205,4 +203,10 @@ extern struct clkdm_ops omap2_clkdm_operations; extern struct clkdm_ops omap3_clkdm_operations; extern struct clkdm_ops omap4_clkdm_operations; +extern struct clkdm_dep gfx_24xx_wkdeps[]; +extern struct clkdm_dep dsp_24xx_wkdeps[]; +extern struct clockdomain wkup_common_clkdm; +extern struct clockdomain prm_common_clkdm; +extern struct clockdomain cm_common_clkdm; + #endif diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c index f740edb111f..a0d68dbecfa 100644 --- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c +++ b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c @@ -52,8 +52,6 @@ static int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm) u32 mask = 0; for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) { - if (!omap_chip_is(cd->omap_chip)) - continue; if (!cd->clkdm) continue; /* only happens if data is erroneous */ @@ -98,8 +96,6 @@ static int omap3_clkdm_clear_all_sleepdeps(struct clockdomain *clkdm) u32 mask = 0; for (cd = clkdm->sleepdep_srcs; cd && cd->clkdm_name; cd++) { - if (!omap_chip_is(cd->omap_chip)) - continue; if (!cd->clkdm) continue; /* only happens if data is erroneous */ diff --git a/arch/arm/mach-omap2/clockdomain44xx.c b/arch/arm/mach-omap2/clockdomain44xx.c index b43706aa08b..935c7f03dab 100644 --- a/arch/arm/mach-omap2/clockdomain44xx.c +++ b/arch/arm/mach-omap2/clockdomain44xx.c @@ -52,8 +52,6 @@ static int omap4_clkdm_clear_all_wkup_sleep_deps(struct clockdomain *clkdm) u32 mask = 0; for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) { - if (!omap_chip_is(cd->omap_chip)) - continue; if (!cd->clkdm) continue; /* only happens if data is erroneous */ diff --git a/arch/arm/mach-omap2/clockdomains2420_data.c b/arch/arm/mach-omap2/clockdomains2420_data.c new file mode 100644 index 00000000000..0ab8e46d5b2 --- /dev/null +++ b/arch/arm/mach-omap2/clockdomains2420_data.c @@ -0,0 +1,154 @@ +/* + * OMAP2420 clockdomains + * + * Copyright (C) 2008-2011 Texas Instruments, Inc. + * Copyright (C) 2008-2010 Nokia Corporation + * + * Paul Walmsley, Jouni Högander + * + * This file contains clockdomains and clockdomain wakeup dependencies + * for OMAP2420 chips. Some notes: + * + * A useful validation rule for struct clockdomain: Any clockdomain + * referenced by a wkdep_srcs must have a dep_bit assigned. So + * wkdep_srcs are really just software-controllable dependencies. + * Non-software-controllable dependencies do exist, but they are not + * encoded below (yet). + * + * 24xx does not support programmable sleep dependencies (SLEEPDEP) + * + * The overly-specific dep_bit names are due to a bit name collision + * with CM_FCLKEN_{DSP,IVA2}. The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift + * value are the same for all powerdomains: 2 + * + * XXX should dep_bit be a mask, so we can test to see if it is 0 as a + * sanity check? + * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE + */ + +/* + * To-Do List + * -> Port the Sleep/Wakeup dependencies for the domains + * from the Power domain framework + */ + +#include <linux/kernel.h> +#include <linux/io.h> + +#include "clockdomain.h" +#include "prm2xxx_3xxx.h" +#include "cm2xxx_3xxx.h" +#include "cm-regbits-24xx.h" +#include "prm-regbits-24xx.h" + +/* + * Clockdomain dependencies for wkdeps + * + * XXX Hardware dependencies (e.g., dependencies that cannot be + * changed in software) are not included here yet, but should be. + */ + +/* Wakeup dependency source arrays */ + +/* 2420-specific possible wakeup dependencies */ + +/* 2420 PM_WKDEP_MPU: CORE, DSP, WKUP */ +static struct clkdm_dep mpu_2420_wkdeps[] = { + { .clkdm_name = "core_l3_clkdm" }, + { .clkdm_name = "core_l4_clkdm" }, + { .clkdm_name = "dsp_clkdm" }, + { .clkdm_name = "wkup_clkdm" }, + { NULL }, +}; + +/* 2420 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP */ +static struct clkdm_dep core_2420_wkdeps[] = { + { .clkdm_name = "dsp_clkdm" }, + { .clkdm_name = "gfx_clkdm" }, + { .clkdm_name = "mpu_clkdm" }, + { .clkdm_name = "wkup_clkdm" }, + { NULL }, +}; + +/* + * 2420-only clockdomains + */ + +static struct clockdomain mpu_2420_clkdm = { + .name = "mpu_clkdm", + .pwrdm = { .name = "mpu_pwrdm" }, + .flags = CLKDM_CAN_HWSUP, + .wkdep_srcs = mpu_2420_wkdeps, + .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK, +}; + +static struct clockdomain iva1_2420_clkdm = { + .name = "iva1_clkdm", + .pwrdm = { .name = "dsp_pwrdm" }, + .flags = CLKDM_CAN_HWSUP_SWSUP, + .dep_bit = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT, + .wkdep_srcs = dsp_24xx_wkdeps, + .clktrctrl_mask = OMAP2420_AUTOSTATE_IVA_MASK, +}; + +static struct clockdomain dsp_2420_clkdm = { + .name = "dsp_clkdm", + .pwrdm = { .name = "dsp_pwrdm" }, + .flags = CLKDM_CAN_HWSUP_SWSUP, + .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK, +}; + +static struct clockdomain gfx_2420_clkdm = { + .name = "gfx_clkdm", + .pwrdm = { .name = "gfx_pwrdm" }, + .flags = CLKDM_CAN_HWSUP_SWSUP, + .wkdep_srcs = gfx_24xx_wkdeps, + .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK, +}; + +static struct clockdomain core_l3_2420_clkdm = { + .name = "core_l3_clkdm", + .pwrdm = { .name = "core_pwrdm" }, + .flags = CLKDM_CAN_HWSUP, + .wkdep_srcs = core_2420_wkdeps, + .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK, +}; + +static struct clockdomain core_l4_2420_clkdm = { + .name = "core_l4_clkdm", + .pwrdm = { .name = "core_pwrdm" }, + .flags = CLKDM_CAN_HWSUP, + .wkdep_srcs = core_2420_wkdeps, + .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK, +}; + +static struct clockdomain dss_2420_clkdm = { + .name = "dss_clkdm", + .pwrdm = { .name = "core_pwrdm" }, + .flags = CLKDM_CAN_HWSUP, + .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK, +}; + +static struct clockdomain *clockdomains_omap242x[] __initdata = { + &wkup_common_clkdm, + &cm_common_clkdm, + &prm_common_clkdm, + &mpu_2420_clkdm, + &iva1_2420_clkdm, + &dsp_2420_clkdm, + &gfx_2420_clkdm, + &core_l3_2420_clkdm, + &core_l4_2420_clkdm, + &dss_2420_clkdm, + NULL, +}; + +void __init omap242x_clockdomains_init(void) +{ + if (!cpu_is_omap242x()) + return; + + clkdm_register_platform_funcs(&omap2_clkdm_operations); + clkdm_register_clkdms(clockdomains_omap242x); + clkdm_complete_init(); +} diff --git a/arch/arm/mach-omap2/clockdomains2430_data.c b/arch/arm/mach-omap2/clockdomains2430_data.c new file mode 100644 index 00000000000..3645ed04489 --- /dev/null +++ b/arch/arm/mach-omap2/clockdomains2430_data.c @@ -0,0 +1,181 @@ +/* + * OMAP2xxx clockdomains + * + * Copyright (C) 2008-2009 Texas Instruments, Inc. + * Copyright (C) 2008-2010 Nokia Corporation + * + * Paul Walmsley, Jouni Högander + * + * This file contains clockdomains and clockdomain wakeup dependencies + * for OMAP2xxx chips. Some notes: + * + * A useful validation rule for struct clockdomain: Any clockdomain + * referenced by a wkdep_srcs must have a dep_bit assigned. So + * wkdep_srcs are really just software-controllable dependencies. + * Non-software-controllable dependencies do exist, but they are not + * encoded below (yet). + * + * 24xx does not support programmable sleep dependencies (SLEEPDEP) + * + * The overly-specific dep_bit names are due to a bit name collision + * with CM_FCLKEN_{DSP,IVA2}. The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift + * value are the same for all powerdomains: 2 + * + * XXX should dep_bit be a mask, so we can test to see if it is 0 as a + * sanity check? + * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE + */ + +/* + * To-Do List + * -> Port the Sleep/Wakeup dependencies for the domains + * from the Power domain framework + */ + +#include <linux/kernel.h> +#include <linux/io.h> + +#include "clockdomain.h" +#include "prm2xxx_3xxx.h" +#include "cm2xxx_3xxx.h" +#include "cm-regbits-24xx.h" +#include "prm-regbits-24xx.h" + +/* + * Clockdomain dependencies for wkdeps + * + * XXX Hardware dependencies (e.g., dependencies that cannot be + * changed in software) are not included here yet, but should be. + */ + +/* Wakeup dependency source arrays */ + +/* 2430-specific possible wakeup dependencies */ + +/* 2430 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP, MDM */ +static struct clkdm_dep core_2430_wkdeps[] = { + { .clkdm_name = "dsp_clkdm" }, + { .clkdm_name = "gfx_clkdm" }, + { .clkdm_name = "mpu_clkdm" }, + { .clkdm_name = "wkup_clkdm" }, + { .clkdm_name = "mdm_clkdm" }, + { NULL }, +}; + +/* 2430 PM_WKDEP_MPU: CORE, DSP, WKUP, MDM */ +static struct clkdm_dep mpu_2430_wkdeps[] = { + { .clkdm_name = "core_l3_clkdm" }, + { .clkdm_name = "core_l4_clkdm" }, + { .clkdm_name = "dsp_clkdm" }, + { .clkdm_name = "wkup_clkdm" }, + { .clkdm_name = "mdm_clkdm" }, + { NULL }, +}; + +/* 2430 PM_WKDEP_MDM: CORE, MPU, WKUP */ +static struct clkdm_dep mdm_2430_wkdeps[] = { + { .clkdm_name = "core_l3_clkdm" }, + { .clkdm_name = "core_l4_clkdm" }, + { .clkdm_name = "mpu_clkdm" }, + { .clkdm_name = "wkup_clkdm" }, + { NULL }, +}; + +/* + * 2430-only clockdomains + */ + +static struct clockdomain mpu_2430_clkdm = { + .name = "mpu_clkdm", + .pwrdm = { .name = "mpu_pwrdm" }, + .flags = CLKDM_CAN_HWSUP_SWSUP, + .wkdep_srcs = mpu_2430_wkdeps, + .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK, +}; + +/* Another case of bit name collisions between several registers: EN_MDM */ +static struct clockdomain mdm_clkdm = { + .name = "mdm_clkdm", + .pwrdm = { .name = "mdm_pwrdm" }, + .flags = CLKDM_CAN_HWSUP_SWSUP, + .dep_bit = OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT, + .wkdep_srcs = mdm_2430_wkdeps, + .clktrctrl_mask = OMAP2430_AUTOSTATE_MDM_MASK, +}; + +static struct clockdomain dsp_2430_clkdm = { + .name = "dsp_clkdm", + .pwrdm = { .name = "dsp_pwrdm" }, + .flags = CLKDM_CAN_HWSUP_SWSUP, + .dep_bit = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT, + .wkdep_srcs = dsp_24xx_wkdeps, + .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK, +}; + +static struct clockdomain gfx_2430_clkdm = { + .name = "gfx_clkdm", + .pwrdm = { .name = "gfx_pwrdm" }, + .flags = CLKDM_CAN_HWSUP_SWSUP, + .wkdep_srcs = gfx_24xx_wkdeps, + .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK, +}; + +/* + * XXX add usecounting for clkdm dependencies, otherwise the presence + * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm + * could cause trouble + */ +static struct clockdomain core_l3_2430_clkdm = { + .name = "core_l3_clkdm", + .pwrdm = { .name = "core_pwrdm" }, + .flags = CLKDM_CAN_HWSUP, + .dep_bit = OMAP24XX_EN_CORE_SHIFT, + .wkdep_srcs = core_2430_wkdeps, + .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK, +}; + +/* + * XXX add usecounting for clkdm dependencies, otherwise the presence + * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm + * could cause trouble + */ +static struct clockdomain core_l4_2430_clkdm = { + .name = "core_l4_clkdm", + .pwrdm = { .name = "core_pwrdm" }, + .flags = CLKDM_CAN_HWSUP, + .dep_bit = OMAP24XX_EN_CORE_SHIFT, + .wkdep_srcs = core_2430_wkdeps, + .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK, +}; + +static struct clockdomain dss_2430_clkdm = { + .name = "dss_clkdm", + .pwrdm = { .name = "core_pwrdm" }, + .flags = CLKDM_CAN_HWSUP, + .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK, +}; + +static struct clockdomain *clockdomains_omap243x[] __initdata = { + &wkup_common_clkdm, + &cm_common_clkdm, + &prm_common_clkdm, + &mpu_2430_clkdm, + &mdm_clkdm, + &dsp_2430_clkdm, + &gfx_2430_clkdm, + &core_l3_2430_clkdm, + &core_l4_2430_clkdm, + &dss_2430_clkdm, + NULL, +}; + +void __init omap243x_clockdomains_init(void) +{ + if (!cpu_is_omap243x()) + return; + + clkdm_register_platform_funcs(&omap2_clkdm_operations); + clkdm_register_clkdms(clockdomains_omap243x); + clkdm_complete_init(); +} + diff --git a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c index 13bde95b679..0a6a04897d8 100644 --- a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c +++ b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c @@ -1,7 +1,7 @@ /* - * OMAP2/3 clockdomains + * OMAP2/3 clockdomain common data * - * Copyright (C) 2008-2009 Texas Instruments, Inc. + * Copyright (C) 2008-2011 Texas Instruments, Inc. * Copyright (C) 2008-2010 Nokia Corporation * * Paul Walmsley, Jouni Högander @@ -51,374 +51,28 @@ * changed in software) are not included here yet, but should be. */ -/* OMAP2/3-common wakeup dependencies */ - -/* - * 2420/2430 PM_WKDEP_GFX: CORE, MPU, WKUP - * 3430ES1 PM_WKDEP_GFX: adds IVA2, removes CORE - * 3430ES2 PM_WKDEP_SGX: adds IVA2, removes CORE - * These can share data since they will never be present simultaneously - * on the same device. - */ -static struct clkdm_dep gfx_sgx_wkdeps[] = { - { - .clkdm_name = "core_l3_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) - }, - { - .clkdm_name = "core_l4_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) - }, - { - .clkdm_name = "iva2_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { - .clkdm_name = "mpu_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | - CHIP_IS_OMAP3430) - }, - { - .clkdm_name = "wkup_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | - CHIP_IS_OMAP3430) - }, - { NULL }, -}; - - -/* 24XX-specific possible dependencies */ - -#ifdef CONFIG_ARCH_OMAP2 - /* Wakeup dependency source arrays */ -/* 2420/2430 PM_WKDEP_DSP: CORE, MPU, WKUP */ -static struct clkdm_dep dsp_24xx_wkdeps[] = { - { - .clkdm_name = "core_l3_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) - }, - { - .clkdm_name = "core_l4_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) - }, - { - .clkdm_name = "mpu_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) - }, - { - .clkdm_name = "wkup_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) - }, - { NULL }, -}; - -/* - * 2420 PM_WKDEP_MPU: CORE, DSP, WKUP - * 2430 adds MDM - */ -static struct clkdm_dep mpu_24xx_wkdeps[] = { - { - .clkdm_name = "core_l3_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) - }, - { - .clkdm_name = "core_l4_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) - }, - { - .clkdm_name = "dsp_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) - }, - { - .clkdm_name = "wkup_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) - }, - { - .clkdm_name = "mdm_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) - }, - { NULL }, -}; - -/* - * 2420 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP - * 2430 adds MDM - */ -static struct clkdm_dep core_24xx_wkdeps[] = { - { - .clkdm_name = "dsp_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) - }, - { - .clkdm_name = "gfx_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) - }, - { - .clkdm_name = "mpu_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) - }, - { - .clkdm_name = "wkup_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) - }, - { - .clkdm_name = "mdm_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) - }, - { NULL }, -}; - -#endif /* CONFIG_ARCH_OMAP2 */ - -/* 2430-specific possible wakeup dependencies */ +/* 2xxx-specific possible dependencies */ -#ifdef CONFIG_SOC_OMAP2430 - -/* 2430 PM_WKDEP_MDM: CORE, MPU, WKUP */ -static struct clkdm_dep mdm_2430_wkdeps[] = { - { - .clkdm_name = "core_l3_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) - }, - { - .clkdm_name = "core_l4_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) - }, - { - .clkdm_name = "mpu_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) - }, - { - .clkdm_name = "wkup_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX) - }, - { NULL }, -}; - -#endif /* CONFIG_SOC_OMAP2430 */ - - -/* OMAP3-specific possible dependencies */ - -#ifdef CONFIG_ARCH_OMAP3 - -/* 3430: PM_WKDEP_PER: CORE, IVA2, MPU, WKUP */ -static struct clkdm_dep per_wkdeps[] = { - { - .clkdm_name = "core_l3_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { - .clkdm_name = "core_l4_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { - .clkdm_name = "iva2_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { - .clkdm_name = "mpu_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { - .clkdm_name = "wkup_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { NULL }, -}; - -/* 3430ES2: PM_WKDEP_USBHOST: CORE, IVA2, MPU, WKUP */ -static struct clkdm_dep usbhost_wkdeps[] = { - { - .clkdm_name = "core_l3_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { - .clkdm_name = "core_l4_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { - .clkdm_name = "iva2_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { - .clkdm_name = "mpu_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { - .clkdm_name = "wkup_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, +/* 2xxx PM_WKDEP_GFX: CORE, MPU, WKUP */ +struct clkdm_dep gfx_24xx_wkdeps[] = { + { .clkdm_name = "core_l3_clkdm" }, + { .clkdm_name = "core_l4_clkdm" }, + { .clkdm_name = "mpu_clkdm" }, + { .clkdm_name = "wkup_clkdm" }, { NULL }, }; -/* 3430 PM_WKDEP_MPU: CORE, IVA2, DSS, PER */ -static struct clkdm_dep mpu_3xxx_wkdeps[] = { - { - .clkdm_name = "core_l3_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { - .clkdm_name = "core_l4_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { - .clkdm_name = "iva2_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { - .clkdm_name = "dss_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { - .clkdm_name = "per_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, +/* 2xxx PM_WKDEP_DSP: CORE, MPU, WKUP */ +struct clkdm_dep dsp_24xx_wkdeps[] = { + { .clkdm_name = "core_l3_clkdm" }, + { .clkdm_name = "core_l4_clkdm" }, + { .clkdm_name = "mpu_clkdm" }, + { .clkdm_name = "wkup_clkdm" }, { NULL }, }; -/* 3430 PM_WKDEP_IVA2: CORE, MPU, WKUP, DSS, PER */ -static struct clkdm_dep iva2_wkdeps[] = { - { - .clkdm_name = "core_l3_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { - .clkdm_name = "core_l4_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { - .clkdm_name = "mpu_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { - .clkdm_name = "wkup_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { - .clkdm_name = "dss_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { - .clkdm_name = "per_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { NULL }, -}; - - -/* 3430 PM_WKDEP_CAM: IVA2, MPU, WKUP */ -static struct clkdm_dep cam_wkdeps[] = { - { - .clkdm_name = "iva2_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { - .clkdm_name = "mpu_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { - .clkdm_name = "wkup_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { NULL }, -}; - -/* 3430 PM_WKDEP_DSS: IVA2, MPU, WKUP */ -static struct clkdm_dep dss_wkdeps[] = { - { - .clkdm_name = "iva2_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { - .clkdm_name = "mpu_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { - .clkdm_name = "wkup_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { NULL }, -}; - -/* 3430: PM_WKDEP_NEON: MPU */ -static struct clkdm_dep neon_wkdeps[] = { - { - .clkdm_name = "mpu_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { NULL }, -}; - - -/* Sleep dependency source arrays for OMAP3-specific clkdms */ - -/* 3430: CM_SLEEPDEP_DSS: MPU, IVA */ -static struct clkdm_dep dss_sleepdeps[] = { - { - .clkdm_name = "mpu_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { - .clkdm_name = "iva2_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { NULL }, -}; - -/* 3430: CM_SLEEPDEP_PER: MPU, IVA */ -static struct clkdm_dep per_sleepdeps[] = { - { - .clkdm_name = "mpu_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { - .clkdm_name = "iva2_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { NULL }, -}; - -/* 3430ES2: CM_SLEEPDEP_USBHOST: MPU, IVA */ -static struct clkdm_dep usbhost_sleepdeps[] = { - { - .clkdm_name = "mpu_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { - .clkdm_name = "iva2_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { NULL }, -}; - -/* 3430: CM_SLEEPDEP_CAM: MPU */ -static struct clkdm_dep cam_sleepdeps[] = { - { - .clkdm_name = "mpu_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { NULL }, -}; - -/* - * 3430ES1: CM_SLEEPDEP_GFX: MPU - * 3430ES2: CM_SLEEPDEP_SGX: MPU - * These can share data since they will never be present simultaneously - * on the same device. - */ -static struct clkdm_dep gfx_sgx_sleepdeps[] = { - { - .clkdm_name = "mpu_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { NULL }, -}; - -#endif /* CONFIG_ARCH_OMAP3 */ - /* * OMAP2/3-common clockdomains @@ -430,439 +84,18 @@ static struct clkdm_dep gfx_sgx_sleepdeps[] = { */ /* This is an implicit clockdomain - it is never defined as such in TRM */ -static struct clockdomain wkup_clkdm = { +struct clockdomain wkup_common_clkdm = { .name = "wkup_clkdm", .pwrdm = { .name = "wkup_pwrdm" }, .dep_bit = OMAP_EN_WKUP_SHIFT, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430), }; -static struct clockdomain prm_clkdm = { +struct clockdomain prm_common_clkdm = { .name = "prm_clkdm", .pwrdm = { .name = "wkup_pwrdm" }, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430), }; -static struct clockdomain cm_clkdm = { +struct clockdomain cm_common_clkdm = { .name = "cm_clkdm", .pwrdm = { .name = "core_pwrdm" }, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430), }; - -/* - * 2420-only clockdomains - */ - -#if defined(CONFIG_SOC_OMAP2420) - -static struct clockdomain mpu_2420_clkdm = { - .name = "mpu_clkdm", - .pwrdm = { .name = "mpu_pwrdm" }, - .flags = CLKDM_CAN_HWSUP, - .wkdep_srcs = mpu_24xx_wkdeps, - .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), -}; - -static struct clockdomain iva1_2420_clkdm = { - .name = "iva1_clkdm", - .pwrdm = { .name = "dsp_pwrdm" }, - .flags = CLKDM_CAN_HWSUP_SWSUP, - .dep_bit = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT, - .wkdep_srcs = dsp_24xx_wkdeps, - .clktrctrl_mask = OMAP2420_AUTOSTATE_IVA_MASK, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), -}; - -static struct clockdomain dsp_2420_clkdm = { - .name = "dsp_clkdm", - .pwrdm = { .name = "dsp_pwrdm" }, - .flags = CLKDM_CAN_HWSUP_SWSUP, - .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), -}; - -static struct clockdomain gfx_2420_clkdm = { - .name = "gfx_clkdm", - .pwrdm = { .name = "gfx_pwrdm" }, - .flags = CLKDM_CAN_HWSUP_SWSUP, - .wkdep_srcs = gfx_sgx_wkdeps, - .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), -}; - -static struct clockdomain core_l3_2420_clkdm = { - .name = "core_l3_clkdm", - .pwrdm = { .name = "core_pwrdm" }, - .flags = CLKDM_CAN_HWSUP, - .wkdep_srcs = core_24xx_wkdeps, - .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), -}; - -static struct clockdomain core_l4_2420_clkdm = { - .name = "core_l4_clkdm", - .pwrdm = { .name = "core_pwrdm" }, - .flags = CLKDM_CAN_HWSUP, - .wkdep_srcs = core_24xx_wkdeps, - .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), -}; - -static struct clockdomain dss_2420_clkdm = { - .name = "dss_clkdm", - .pwrdm = { .name = "core_pwrdm" }, - .flags = CLKDM_CAN_HWSUP, - .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), -}; - -#endif /* CONFIG_SOC_OMAP2420 */ - - -/* - * 2430-only clockdomains - */ - -#if defined(CONFIG_SOC_OMAP2430) - -static struct clockdomain mpu_2430_clkdm = { - .name = "mpu_clkdm", - .pwrdm = { .name = "mpu_pwrdm" }, - .flags = CLKDM_CAN_HWSUP_SWSUP, - .wkdep_srcs = mpu_24xx_wkdeps, - .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), -}; - -/* Another case of bit name collisions between several registers: EN_MDM */ -static struct clockdomain mdm_clkdm = { - .name = "mdm_clkdm", - .pwrdm = { .name = "mdm_pwrdm" }, - .flags = CLKDM_CAN_HWSUP_SWSUP, - .dep_bit = OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT, - .wkdep_srcs = mdm_2430_wkdeps, - .clktrctrl_mask = OMAP2430_AUTOSTATE_MDM_MASK, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), -}; - -static struct clockdomain dsp_2430_clkdm = { - .name = "dsp_clkdm", - .pwrdm = { .name = "dsp_pwrdm" }, - .flags = CLKDM_CAN_HWSUP_SWSUP, - .dep_bit = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT, - .wkdep_srcs = dsp_24xx_wkdeps, - .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), -}; - -static struct clockdomain gfx_2430_clkdm = { - .name = "gfx_clkdm", - .pwrdm = { .name = "gfx_pwrdm" }, - .flags = CLKDM_CAN_HWSUP_SWSUP, - .wkdep_srcs = gfx_sgx_wkdeps, - .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), -}; - -/* - * XXX add usecounting for clkdm dependencies, otherwise the presence - * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm - * could cause trouble - */ -static struct clockdomain core_l3_2430_clkdm = { - .name = "core_l3_clkdm", - .pwrdm = { .name = "core_pwrdm" }, - .flags = CLKDM_CAN_HWSUP, - .dep_bit = OMAP24XX_EN_CORE_SHIFT, - .wkdep_srcs = core_24xx_wkdeps, - .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), -}; - -/* - * XXX add usecounting for clkdm dependencies, otherwise the presence - * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm - * could cause trouble - */ -static struct clockdomain core_l4_2430_clkdm = { - .name = "core_l4_clkdm", - .pwrdm = { .name = "core_pwrdm" }, - .flags = CLKDM_CAN_HWSUP, - .dep_bit = OMAP24XX_EN_CORE_SHIFT, - .wkdep_srcs = core_24xx_wkdeps, - .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), -}; - -static struct clockdomain dss_2430_clkdm = { - .name = "dss_clkdm", - .pwrdm = { .name = "core_pwrdm" }, - .flags = CLKDM_CAN_HWSUP, - .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), -}; - -#endif /* CONFIG_SOC_OMAP2430 */ - - -/* - * OMAP3 clockdomains - */ - -#if defined(CONFIG_ARCH_OMAP3) - -static struct clockdomain mpu_3xxx_clkdm = { - .name = "mpu_clkdm", - .pwrdm = { .name = "mpu_pwrdm" }, - .flags = CLKDM_CAN_HWSUP | CLKDM_CAN_FORCE_WAKEUP, - .dep_bit = OMAP3430_EN_MPU_SHIFT, - .wkdep_srcs = mpu_3xxx_wkdeps, - .clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), -}; - -static struct clockdomain neon_clkdm = { - .name = "neon_clkdm", - .pwrdm = { .name = "neon_pwrdm" }, - .flags = CLKDM_CAN_HWSUP_SWSUP, - .wkdep_srcs = neon_wkdeps, - .clktrctrl_mask = OMAP3430_CLKTRCTRL_NEON_MASK, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), -}; - -static struct clockdomain iva2_clkdm = { - .name = "iva2_clkdm", - .pwrdm = { .name = "iva2_pwrdm" }, - .flags = CLKDM_CAN_HWSUP_SWSUP, - .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_IVA2_SHIFT, - .wkdep_srcs = iva2_wkdeps, - .clktrctrl_mask = OMAP3430_CLKTRCTRL_IVA2_MASK, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), -}; - -static struct clockdomain gfx_3430es1_clkdm = { - .name = "gfx_clkdm", - .pwrdm = { .name = "gfx_pwrdm" }, - .flags = CLKDM_CAN_HWSUP_SWSUP, - .wkdep_srcs = gfx_sgx_wkdeps, - .sleepdep_srcs = gfx_sgx_sleepdeps, - .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_GFX_MASK, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1), -}; - -static struct clockdomain sgx_clkdm = { - .name = "sgx_clkdm", - .pwrdm = { .name = "sgx_pwrdm" }, - .flags = CLKDM_CAN_HWSUP_SWSUP, - .wkdep_srcs = gfx_sgx_wkdeps, - .sleepdep_srcs = gfx_sgx_sleepdeps, - .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK, - .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2), -}; - -/* - * The die-to-die clockdomain was documented in the 34xx ES1 TRM, but - * then that information was removed from the 34xx ES2+ TRM. It is - * unclear whether the core is still there, but the clockdomain logic - * is there, and must be programmed to an appropriate state if the - * CORE clockdomain is to become inactive. - */ -static struct clockdomain d2d_clkdm = { - .name = "d2d_clkdm", - .pwrdm = { .name = "core_pwrdm" }, - .flags = CLKDM_CAN_HWSUP_SWSUP, - .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), -}; - -/* - * XXX add usecounting for clkdm dependencies, otherwise the presence - * of a single dep bit for core_l3_3xxx_clkdm and core_l4_3xxx_clkdm - * could cause trouble - */ -static struct clockdomain core_l3_3xxx_clkdm = { - .name = "core_l3_clkdm", - .pwrdm = { .name = "core_pwrdm" }, - .flags = CLKDM_CAN_HWSUP, - .dep_bit = OMAP3430_EN_CORE_SHIFT, - .clktrctrl_mask = OMAP3430_CLKTRCTRL_L3_MASK, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), -}; - -/* - * XXX add usecounting for clkdm dependencies, otherwise the presence - * of a single dep bit for core_l3_3xxx_clkdm and core_l4_3xxx_clkdm - * could cause trouble - */ -static struct clockdomain core_l4_3xxx_clkdm = { - .name = "core_l4_clkdm", - .pwrdm = { .name = "core_pwrdm" }, - .flags = CLKDM_CAN_HWSUP, - .dep_bit = OMAP3430_EN_CORE_SHIFT, - .clktrctrl_mask = OMAP3430_CLKTRCTRL_L4_MASK, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), -}; - -/* Another case of bit name collisions between several registers: EN_DSS */ -static struct clockdomain dss_3xxx_clkdm = { - .name = "dss_clkdm", - .pwrdm = { .name = "dss_pwrdm" }, - .flags = CLKDM_CAN_HWSUP_SWSUP, - .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT, - .wkdep_srcs = dss_wkdeps, - .sleepdep_srcs = dss_sleepdeps, - .clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), -}; - -static struct clockdomain cam_clkdm = { - .name = "cam_clkdm", - .pwrdm = { .name = "cam_pwrdm" }, - .flags = CLKDM_CAN_HWSUP_SWSUP, - .wkdep_srcs = cam_wkdeps, - .sleepdep_srcs = cam_sleepdeps, - .clktrctrl_mask = OMAP3430_CLKTRCTRL_CAM_MASK, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), -}; - -static struct clockdomain usbhost_clkdm = { - .name = "usbhost_clkdm", - .pwrdm = { .name = "usbhost_pwrdm" }, - .flags = CLKDM_CAN_HWSUP_SWSUP, - .wkdep_srcs = usbhost_wkdeps, - .sleepdep_srcs = usbhost_sleepdeps, - .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK, - .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2), -}; - -static struct clockdomain per_clkdm = { - .name = "per_clkdm", - .pwrdm = { .name = "per_pwrdm" }, - .flags = CLKDM_CAN_HWSUP_SWSUP, - .dep_bit = OMAP3430_EN_PER_SHIFT, - .wkdep_srcs = per_wkdeps, - .sleepdep_srcs = per_sleepdeps, - .clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), -}; - -/* - * Disable hw supervised mode for emu_clkdm, because emu_pwrdm is - * switched of even if sdti is in use - */ -static struct clockdomain emu_clkdm = { - .name = "emu_clkdm", - .pwrdm = { .name = "emu_pwrdm" }, - .flags = /* CLKDM_CAN_ENABLE_AUTO | */CLKDM_CAN_SWSUP, - .clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), -}; - -static struct clockdomain dpll1_clkdm = { - .name = "dpll1_clkdm", - .pwrdm = { .name = "dpll1_pwrdm" }, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), -}; - -static struct clockdomain dpll2_clkdm = { - .name = "dpll2_clkdm", - .pwrdm = { .name = "dpll2_pwrdm" }, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), -}; - -static struct clockdomain dpll3_clkdm = { - .name = "dpll3_clkdm", - .pwrdm = { .name = "dpll3_pwrdm" }, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), -}; - -static struct clockdomain dpll4_clkdm = { - .name = "dpll4_clkdm", - .pwrdm = { .name = "dpll4_pwrdm" }, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), -}; - -static struct clockdomain dpll5_clkdm = { - .name = "dpll5_clkdm", - .pwrdm = { .name = "dpll5_pwrdm" }, - .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2), -}; - -#endif /* CONFIG_ARCH_OMAP3 */ - -/* - * Clockdomain hwsup dependencies (OMAP3 only) - */ - -static struct clkdm_autodep clkdm_autodeps[] = { - { - .clkdm = { .name = "mpu_clkdm" }, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { - .clkdm = { .name = "iva2_clkdm" }, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) - }, - { - .clkdm = { .name = NULL }, - } -}; - -static struct clockdomain *clockdomains_omap2[] __initdata = { - &wkup_clkdm, - &cm_clkdm, - &prm_clkdm, - -#ifdef CONFIG_SOC_OMAP2420 - &mpu_2420_clkdm, - &iva1_2420_clkdm, - &dsp_2420_clkdm, - &gfx_2420_clkdm, - &core_l3_2420_clkdm, - &core_l4_2420_clkdm, - &dss_2420_clkdm, -#endif - -#ifdef CONFIG_SOC_OMAP2430 - &mpu_2430_clkdm, - &mdm_clkdm, - &dsp_2430_clkdm, - &gfx_2430_clkdm, - &core_l3_2430_clkdm, - &core_l4_2430_clkdm, - &dss_2430_clkdm, -#endif - -#ifdef CONFIG_ARCH_OMAP3 - &mpu_3xxx_clkdm, - &neon_clkdm, - &iva2_clkdm, - &gfx_3430es1_clkdm, - &sgx_clkdm, - &d2d_clkdm, - &core_l3_3xxx_clkdm, - &core_l4_3xxx_clkdm, - &dss_3xxx_clkdm, - &cam_clkdm, - &usbhost_clkdm, - &per_clkdm, - &emu_clkdm, - &dpll1_clkdm, - &dpll2_clkdm, - &dpll3_clkdm, - &dpll4_clkdm, - &dpll5_clkdm, -#endif - NULL, -}; - -void __init omap2xxx_clockdomains_init(void) -{ - clkdm_init(clockdomains_omap2, clkdm_autodeps, &omap2_clkdm_operations); -} - -void __init omap3xxx_clockdomains_init(void) -{ - clkdm_init(clockdomains_omap2, clkdm_autodeps, &omap3_clkdm_operations); -} diff --git a/arch/arm/mach-omap2/clockdomains3xxx_data.c b/arch/arm/mach-omap2/clockdomains3xxx_data.c new file mode 100644 index 00000000000..b84e138d99c --- /dev/null +++ b/arch/arm/mach-omap2/clockdomains3xxx_data.c @@ -0,0 +1,398 @@ +/* + * OMAP3xxx clockdomains + * + * Copyright (C) 2008-2011 Texas Instruments, Inc. + * Copyright (C) 2008-2010 Nokia Corporation + * + * Paul Walmsley, Jouni Högander + * + * This file contains clockdomains and clockdomain wakeup/sleep + * dependencies for the OMAP3xxx chips. Some notes: + * + * A useful validation rule for struct clockdomain: Any clockdomain + * referenced by a wkdep_srcs or sleepdep_srcs array must have a + * dep_bit assigned. So wkdep_srcs/sleepdep_srcs are really just + * software-controllable dependencies. Non-software-controllable + * dependencies do exist, but they are not encoded below (yet). + * + * The overly-specific dep_bit names are due to a bit name collision + * with CM_FCLKEN_{DSP,IVA2}. The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift + * value are the same for all powerdomains: 2 + * + * XXX should dep_bit be a mask, so we can test to see if it is 0 as a + * sanity check? + * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE + */ + +/* + * To-Do List + * -> Port the Sleep/Wakeup dependencies for the domains + * from the Power domain framework + */ + +#include <linux/kernel.h> +#include <linux/io.h> + +#include "clockdomain.h" +#include "prm2xxx_3xxx.h" +#include "cm2xxx_3xxx.h" +#include "cm-regbits-34xx.h" +#include "prm-regbits-34xx.h" + +/* + * Clockdomain dependencies for wkdeps/sleepdeps + * + * XXX Hardware dependencies (e.g., dependencies that cannot be + * changed in software) are not included here yet, but should be. + */ + +/* OMAP3-specific possible dependencies */ + +/* + * 3430ES1 PM_WKDEP_GFX: adds IVA2, removes CORE + * 3430ES2 PM_WKDEP_SGX: adds IVA2, removes CORE + */ +static struct clkdm_dep gfx_sgx_3xxx_wkdeps[] = { + { .clkdm_name = "iva2_clkdm", }, + { .clkdm_name = "mpu_clkdm", }, + { .clkdm_name = "wkup_clkdm", }, + { NULL }, +}; + +/* 3430: PM_WKDEP_PER: CORE, IVA2, MPU, WKUP */ +static struct clkdm_dep per_wkdeps[] = { + { .clkdm_name = "core_l3_clkdm" }, + { .clkdm_name = "core_l4_clkdm" }, + { .clkdm_name = "iva2_clkdm" }, + { .clkdm_name = "mpu_clkdm" }, + { .clkdm_name = "wkup_clkdm" }, + { NULL }, +}; + +/* 3430ES2: PM_WKDEP_USBHOST: CORE, IVA2, MPU, WKUP */ +static struct clkdm_dep usbhost_wkdeps[] = { + { .clkdm_name = "core_l3_clkdm" }, + { .clkdm_name = "core_l4_clkdm" }, + { .clkdm_name = "iva2_clkdm" }, + { .clkdm_name = "mpu_clkdm" }, + { .clkdm_name = "wkup_clkdm" }, + { NULL }, +}; + +/* 3430 PM_WKDEP_MPU: CORE, IVA2, DSS, PER */ +static struct clkdm_dep mpu_3xxx_wkdeps[] = { + { .clkdm_name = "core_l3_clkdm" }, + { .clkdm_name = "core_l4_clkdm" }, + { .clkdm_name = "iva2_clkdm" }, + { .clkdm_name = "dss_clkdm" }, + { .clkdm_name = "per_clkdm" }, + { NULL }, +}; + +/* 3430 PM_WKDEP_IVA2: CORE, MPU, WKUP, DSS, PER */ +static struct clkdm_dep iva2_wkdeps[] = { + { .clkdm_name = "core_l3_clkdm" }, + { .clkdm_name = "core_l4_clkdm" }, + { .clkdm_name = "mpu_clkdm" }, + { .clkdm_name = "wkup_clkdm" }, + { .clkdm_name = "dss_clkdm" }, + { .clkdm_name = "per_clkdm" }, + { NULL }, +}; + +/* 3430 PM_WKDEP_CAM: IVA2, MPU, WKUP */ +static struct clkdm_dep cam_wkdeps[] = { + { .clkdm_name = "iva2_clkdm" }, + { .clkdm_name = "mpu_clkdm" }, + { .clkdm_name = "wkup_clkdm" }, + { NULL }, +}; + +/* 3430 PM_WKDEP_DSS: IVA2, MPU, WKUP */ +static struct clkdm_dep dss_wkdeps[] = { + { .clkdm_name = "iva2_clkdm" }, + { .clkdm_name = "mpu_clkdm" }, + { .clkdm_name = "wkup_clkdm" }, + { NULL }, +}; + +/* 3430: PM_WKDEP_NEON: MPU */ +static struct clkdm_dep neon_wkdeps[] = { + { .clkdm_name = "mpu_clkdm" }, + { NULL }, +}; + +/* Sleep dependency source arrays for OMAP3-specific clkdms */ + +/* 3430: CM_SLEEPDEP_DSS: MPU, IVA */ +static struct clkdm_dep dss_sleepdeps[] = { + { .clkdm_name = "mpu_clkdm" }, + { .clkdm_name = "iva2_clkdm" }, + { NULL }, +}; + +/* 3430: CM_SLEEPDEP_PER: MPU, IVA */ +static struct clkdm_dep per_sleepdeps[] = { + { .clkdm_name = "mpu_clkdm" }, + { .clkdm_name = "iva2_clkdm" }, + { NULL }, +}; + +/* 3430ES2: CM_SLEEPDEP_USBHOST: MPU, IVA */ +static struct clkdm_dep usbhost_sleepdeps[] = { + { .clkdm_name = "mpu_clkdm" }, + { .clkdm_name = "iva2_clkdm" }, + { NULL }, +}; + +/* 3430: CM_SLEEPDEP_CAM: MPU */ +static struct clkdm_dep cam_sleepdeps[] = { + { .clkdm_name = "mpu_clkdm" }, + { NULL }, +}; + +/* + * 3430ES1: CM_SLEEPDEP_GFX: MPU + * 3430ES2: CM_SLEEPDEP_SGX: MPU + * These can share data since they will never be present simultaneously + * on the same device. + */ +static struct clkdm_dep gfx_sgx_sleepdeps[] = { + { .clkdm_name = "mpu_clkdm" }, + { NULL }, +}; + +/* + * OMAP3 clockdomains + */ + +static struct clockdomain mpu_3xxx_clkdm = { + .name = "mpu_clkdm", + .pwrdm = { .name = "mpu_pwrdm" }, + .flags = CLKDM_CAN_HWSUP | CLKDM_CAN_FORCE_WAKEUP, + .dep_bit = OMAP3430_EN_MPU_SHIFT, + .wkdep_srcs = mpu_3xxx_wkdeps, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK, +}; + +static struct clockdomain neon_clkdm = { + .name = "neon_clkdm", + .pwrdm = { .name = "neon_pwrdm" }, + .flags = CLKDM_CAN_HWSUP_SWSUP, + .wkdep_srcs = neon_wkdeps, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_NEON_MASK, +}; + +static struct clockdomain iva2_clkdm = { + .name = "iva2_clkdm", + .pwrdm = { .name = "iva2_pwrdm" }, + .flags = CLKDM_CAN_HWSUP_SWSUP, + .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_IVA2_SHIFT, + .wkdep_srcs = iva2_wkdeps, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_IVA2_MASK, +}; + +static struct clockdomain gfx_3430es1_clkdm = { + .name = "gfx_clkdm", + .pwrdm = { .name = "gfx_pwrdm" }, + .flags = CLKDM_CAN_HWSUP_SWSUP, + .wkdep_srcs = gfx_sgx_3xxx_wkdeps, + .sleepdep_srcs = gfx_sgx_sleepdeps, + .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_GFX_MASK, +}; + +static struct clockdomain sgx_clkdm = { + .name = "sgx_clkdm", + .pwrdm = { .name = "sgx_pwrdm" }, + .flags = CLKDM_CAN_HWSUP_SWSUP, + .wkdep_srcs = gfx_sgx_3xxx_wkdeps, + .sleepdep_srcs = gfx_sgx_sleepdeps, + .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK, +}; + +/* + * The die-to-die clockdomain was documented in the 34xx ES1 TRM, but + * then that information was removed from the 34xx ES2+ TRM. It is + * unclear whether the core is still there, but the clockdomain logic + * is there, and must be programmed to an appropriate state if the + * CORE clockdomain is to become inactive. + */ +static struct clockdomain d2d_clkdm = { + .name = "d2d_clkdm", + .pwrdm = { .name = "core_pwrdm" }, + .flags = CLKDM_CAN_HWSUP_SWSUP, + .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK, +}; + +/* + * XXX add usecounting for clkdm dependencies, otherwise the presence + * of a single dep bit for core_l3_3xxx_clkdm and core_l4_3xxx_clkdm + * could cause trouble + */ +static struct clockdomain core_l3_3xxx_clkdm = { + .name = "core_l3_clkdm", + .pwrdm = { .name = "core_pwrdm" }, + .flags = CLKDM_CAN_HWSUP, + .dep_bit = OMAP3430_EN_CORE_SHIFT, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_L3_MASK, +}; + +/* + * XXX add usecounting for clkdm dependencies, otherwise the presence + * of a single dep bit for core_l3_3xxx_clkdm and core_l4_3xxx_clkdm + * could cause trouble + */ +static struct clockdomain core_l4_3xxx_clkdm = { + .name = "core_l4_clkdm", + .pwrdm = { .name = "core_pwrdm" }, + .flags = CLKDM_CAN_HWSUP, + .dep_bit = OMAP3430_EN_CORE_SHIFT, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_L4_MASK, +}; + +/* Another case of bit name collisions between several registers: EN_DSS */ +static struct clockdomain dss_3xxx_clkdm = { + .name = "dss_clkdm", + .pwrdm = { .name = "dss_pwrdm" }, + .flags = CLKDM_CAN_HWSUP_SWSUP, + .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT, + .wkdep_srcs = dss_wkdeps, + .sleepdep_srcs = dss_sleepdeps, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK, +}; + +static struct clockdomain cam_clkdm = { + .name = "cam_clkdm", + .pwrdm = { .name = "cam_pwrdm" }, + .flags = CLKDM_CAN_HWSUP_SWSUP, + .wkdep_srcs = cam_wkdeps, + .sleepdep_srcs = cam_sleepdeps, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_CAM_MASK, +}; + +static struct clockdomain usbhost_clkdm = { + .name = "usbhost_clkdm", + .pwrdm = { .name = "usbhost_pwrdm" }, + .flags = CLKDM_CAN_HWSUP_SWSUP, + .wkdep_srcs = usbhost_wkdeps, + .sleepdep_srcs = usbhost_sleepdeps, + .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK, +}; + +static struct clockdomain per_clkdm = { + .name = "per_clkdm", + .pwrdm = { .name = "per_pwrdm" }, + .flags = CLKDM_CAN_HWSUP_SWSUP, + .dep_bit = OMAP3430_EN_PER_SHIFT, + .wkdep_srcs = per_wkdeps, + .sleepdep_srcs = per_sleepdeps, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK, +}; + +/* + * Disable hw supervised mode for emu_clkdm, because emu_pwrdm is + * switched of even if sdti is in use + */ +static struct clockdomain emu_clkdm = { + .name = "emu_clkdm", + .pwrdm = { .name = "emu_pwrdm" }, + .flags = /* CLKDM_CAN_ENABLE_AUTO | */CLKDM_CAN_SWSUP, + .clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK, +}; + +static struct clockdomain dpll1_clkdm = { + .name = "dpll1_clkdm", + .pwrdm = { .name = "dpll1_pwrdm" }, +}; + +static struct clockdomain dpll2_clkdm = { + .name = "dpll2_clkdm", + .pwrdm = { .name = "dpll2_pwrdm" }, +}; + +static struct clockdomain dpll3_clkdm = { + .name = "dpll3_clkdm", + .pwrdm = { .name = "dpll3_pwrdm" }, +}; + +static struct clockdomain dpll4_clkdm = { + .name = "dpll4_clkdm", + .pwrdm = { .name = "dpll4_pwrdm" }, +}; + +static struct clockdomain dpll5_clkdm = { + .name = "dpll5_clkdm", + .pwrdm = { .name = "dpll5_pwrdm" }, +}; + +/* + * Clockdomain hwsup dependencies + */ + +static struct clkdm_autodep clkdm_autodeps[] = { + { + .clkdm = { .name = "mpu_clkdm" }, + }, + { + .clkdm = { .name = "iva2_clkdm" }, + }, + { + .clkdm = { .name = NULL }, + } +}; + +/* + * + */ + +static struct clockdomain *clockdomains_omap3430_common[] __initdata = { + &wkup_common_clkdm, + &cm_common_clkdm, + &prm_common_clkdm, + &mpu_3xxx_clkdm, + &neon_clkdm, + &iva2_clkdm, + &d2d_clkdm, + &core_l3_3xxx_clkdm, + &core_l4_3xxx_clkdm, + &dss_3xxx_clkdm, + &cam_clkdm, + &per_clkdm, + &emu_clkdm, + &dpll1_clkdm, + &dpll2_clkdm, + &dpll3_clkdm, + &dpll4_clkdm, + NULL +}; + +static struct clockdomain *clockdomains_omap3430es1[] __initdata = { + &gfx_3430es1_clkdm, + NULL, +}; + +static struct clockdomain *clockdomains_omap3430es2plus[] __initdata = { + &sgx_clkdm, + &dpll5_clkdm, + &usbhost_clkdm, + NULL, +}; + +void __init omap3xxx_clockdomains_init(void) +{ + struct clockdomain **sc; + + if (!cpu_is_omap34xx()) + return; + + clkdm_register_platform_funcs(&omap3_clkdm_operations); + clkdm_register_clkdms(clockdomains_omap3430_common); + + sc = (omap_rev() == OMAP3430_REV_ES1_0) ? clockdomains_omap3430es1 : + clockdomains_omap3430es2plus; + + clkdm_register_clkdms(sc); + + clkdm_register_autodeps(clkdm_autodeps); + clkdm_complete_init(); +} diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c index dccc651fa0d..9299ac291d2 100644 --- a/arch/arm/mach-omap2/clockdomains44xx_data.c +++ b/arch/arm/mach-omap2/clockdomains44xx_data.c @@ -34,350 +34,122 @@ /* Static Dependencies for OMAP4 Clock Domains */ static struct clkdm_dep d2d_wkup_sleep_deps[] = { - { - .clkdm_name = "abe_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "ivahd_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l3_1_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l3_2_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l3_emif_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l3_init_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l4_cfg_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l4_per_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, + { .clkdm_name = "abe_clkdm" }, + { .clkdm_name = "ivahd_clkdm" }, + { .clkdm_name = "l3_1_clkdm" }, + { .clkdm_name = "l3_2_clkdm" }, + { .clkdm_name = "l3_emif_clkdm" }, + { .clkdm_name = "l3_init_clkdm" }, + { .clkdm_name = "l4_cfg_clkdm" }, + { .clkdm_name = "l4_per_clkdm" }, { NULL }, }; static struct clkdm_dep ducati_wkup_sleep_deps[] = { - { - .clkdm_name = "abe_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "ivahd_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l3_1_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l3_2_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l3_dss_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l3_emif_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l3_gfx_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l3_init_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l4_cfg_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l4_per_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l4_secure_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l4_wkup_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "tesla_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, + { .clkdm_name = "abe_clkdm" }, + { .clkdm_name = "ivahd_clkdm" }, + { .clkdm_name = "l3_1_clkdm" }, + { .clkdm_name = "l3_2_clkdm" }, + { .clkdm_name = "l3_dss_clkdm" }, + { .clkdm_name = "l3_emif_clkdm" }, + { .clkdm_name = "l3_gfx_clkdm" }, + { .clkdm_name = "l3_init_clkdm" }, + { .clkdm_name = "l4_cfg_clkdm" }, + { .clkdm_name = "l4_per_clkdm" }, + { .clkdm_name = "l4_secure_clkdm" }, + { .clkdm_name = "l4_wkup_clkdm" }, + { .clkdm_name = "tesla_clkdm" }, { NULL }, }; static struct clkdm_dep iss_wkup_sleep_deps[] = { - { - .clkdm_name = "ivahd_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l3_1_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l3_emif_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, + { .clkdm_name = "ivahd_clkdm" }, + { .clkdm_name = "l3_1_clkdm" }, + { .clkdm_name = "l3_emif_clkdm" }, { NULL }, }; static struct clkdm_dep ivahd_wkup_sleep_deps[] = { - { - .clkdm_name = "l3_1_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l3_emif_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, + { .clkdm_name = "l3_1_clkdm" }, + { .clkdm_name = "l3_emif_clkdm" }, { NULL }, }; static struct clkdm_dep l3_dma_wkup_sleep_deps[] = { - { - .clkdm_name = "abe_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "ducati_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "ivahd_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l3_1_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l3_dss_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l3_emif_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l3_init_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l4_cfg_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l4_per_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l4_secure_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l4_wkup_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, + { .clkdm_name = "abe_clkdm" }, + { .clkdm_name = "ducati_clkdm" }, + { .clkdm_name = "ivahd_clkdm" }, + { .clkdm_name = "l3_1_clkdm" }, + { .clkdm_name = "l3_dss_clkdm" }, + { .clkdm_name = "l3_emif_clkdm" }, + { .clkdm_name = "l3_init_clkdm" }, + { .clkdm_name = "l4_cfg_clkdm" }, + { .clkdm_name = "l4_per_clkdm" }, + { .clkdm_name = "l4_secure_clkdm" }, + { .clkdm_name = "l4_wkup_clkdm" }, { NULL }, }; static struct clkdm_dep l3_dss_wkup_sleep_deps[] = { - { - .clkdm_name = "ivahd_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l3_2_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l3_emif_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, + { .clkdm_name = "ivahd_clkdm" }, + { .clkdm_name = "l3_2_clkdm" }, + { .clkdm_name = "l3_emif_clkdm" }, { NULL }, }; static struct clkdm_dep l3_gfx_wkup_sleep_deps[] = { - { - .clkdm_name = "ivahd_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l3_1_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l3_emif_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, + { .clkdm_name = "ivahd_clkdm" }, + { .clkdm_name = "l3_1_clkdm" }, + { .clkdm_name = "l3_emif_clkdm" }, { NULL }, }; static struct clkdm_dep l3_init_wkup_sleep_deps[] = { - { - .clkdm_name = "abe_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "ivahd_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l3_emif_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l4_cfg_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l4_per_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l4_secure_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l4_wkup_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, + { .clkdm_name = "abe_clkdm" }, + { .clkdm_name = "ivahd_clkdm" }, + { .clkdm_name = "l3_emif_clkdm" }, + { .clkdm_name = "l4_cfg_clkdm" }, + { .clkdm_name = "l4_per_clkdm" }, + { .clkdm_name = "l4_secure_clkdm" }, + { .clkdm_name = "l4_wkup_clkdm" }, { NULL }, }; static struct clkdm_dep l4_secure_wkup_sleep_deps[] = { - { - .clkdm_name = "l3_1_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l3_emif_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l4_per_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, + { .clkdm_name = "l3_1_clkdm" }, + { .clkdm_name = "l3_emif_clkdm" }, + { .clkdm_name = "l4_per_clkdm" }, { NULL }, }; static struct clkdm_dep mpu_wkup_sleep_deps[] = { - { - .clkdm_name = "abe_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "ducati_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "ivahd_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l3_1_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l3_2_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l3_dss_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l3_emif_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l3_gfx_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l3_init_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l4_cfg_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l4_per_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l4_secure_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l4_wkup_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "tesla_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, + { .clkdm_name = "abe_clkdm" }, + { .clkdm_name = "ducati_clkdm" }, + { .clkdm_name = "ivahd_clkdm" }, + { .clkdm_name = "l3_1_clkdm" }, + { .clkdm_name = "l3_2_clkdm" }, + { .clkdm_name = "l3_dss_clkdm" }, + { .clkdm_name = "l3_emif_clkdm" }, + { .clkdm_name = "l3_gfx_clkdm" }, + { .clkdm_name = "l3_init_clkdm" }, + { .clkdm_name = "l4_cfg_clkdm" }, + { .clkdm_name = "l4_per_clkdm" }, + { .clkdm_name = "l4_secure_clkdm" }, + { .clkdm_name = "l4_wkup_clkdm" }, + { .clkdm_name = "tesla_clkdm" }, { NULL }, }; static struct clkdm_dep tesla_wkup_sleep_deps[] = { - { - .clkdm_name = "abe_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "ivahd_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l3_1_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l3_2_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l3_emif_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l3_init_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l4_cfg_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l4_per_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, - { - .clkdm_name = "l4_wkup_clkdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) - }, + { .clkdm_name = "abe_clkdm" }, + { .clkdm_name = "ivahd_clkdm" }, + { .clkdm_name = "l3_1_clkdm" }, + { .clkdm_name = "l3_2_clkdm" }, + { .clkdm_name = "l3_emif_clkdm" }, + { .clkdm_name = "l3_init_clkdm" }, + { .clkdm_name = "l4_cfg_clkdm" }, + { .clkdm_name = "l4_per_clkdm" }, + { .clkdm_name = "l4_wkup_clkdm" }, { NULL }, }; @@ -388,7 +160,6 @@ static struct clockdomain l4_cefuse_44xx_clkdm = { .cm_inst = OMAP4430_CM2_CEFUSE_INST, .clkdm_offs = OMAP4430_CM2_CEFUSE_CEFUSE_CDOFFS, .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; static struct clockdomain l4_cfg_44xx_clkdm = { @@ -399,7 +170,6 @@ static struct clockdomain l4_cfg_44xx_clkdm = { .clkdm_offs = OMAP4430_CM2_CORE_L4CFG_CDOFFS, .dep_bit = OMAP4430_L4CFG_STATDEP_SHIFT, .flags = CLKDM_CAN_HWSUP, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; static struct clockdomain tesla_44xx_clkdm = { @@ -412,7 +182,6 @@ static struct clockdomain tesla_44xx_clkdm = { .wkdep_srcs = tesla_wkup_sleep_deps, .sleepdep_srcs = tesla_wkup_sleep_deps, .flags = CLKDM_CAN_HWSUP_SWSUP, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; static struct clockdomain l3_gfx_44xx_clkdm = { @@ -425,7 +194,6 @@ static struct clockdomain l3_gfx_44xx_clkdm = { .wkdep_srcs = l3_gfx_wkup_sleep_deps, .sleepdep_srcs = l3_gfx_wkup_sleep_deps, .flags = CLKDM_CAN_HWSUP_SWSUP, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; static struct clockdomain ivahd_44xx_clkdm = { @@ -438,7 +206,6 @@ static struct clockdomain ivahd_44xx_clkdm = { .wkdep_srcs = ivahd_wkup_sleep_deps, .sleepdep_srcs = ivahd_wkup_sleep_deps, .flags = CLKDM_CAN_HWSUP_SWSUP, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; static struct clockdomain l4_secure_44xx_clkdm = { @@ -451,7 +218,6 @@ static struct clockdomain l4_secure_44xx_clkdm = { .wkdep_srcs = l4_secure_wkup_sleep_deps, .sleepdep_srcs = l4_secure_wkup_sleep_deps, .flags = CLKDM_CAN_HWSUP_SWSUP, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; static struct clockdomain l4_per_44xx_clkdm = { @@ -462,7 +228,6 @@ static struct clockdomain l4_per_44xx_clkdm = { .clkdm_offs = OMAP4430_CM2_L4PER_L4PER_CDOFFS, .dep_bit = OMAP4430_L4PER_STATDEP_SHIFT, .flags = CLKDM_CAN_HWSUP_SWSUP, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; static struct clockdomain abe_44xx_clkdm = { @@ -473,7 +238,6 @@ static struct clockdomain abe_44xx_clkdm = { .clkdm_offs = OMAP4430_CM1_ABE_ABE_CDOFFS, .dep_bit = OMAP4430_ABE_STATDEP_SHIFT, .flags = CLKDM_CAN_HWSUP_SWSUP, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; static struct clockdomain l3_instr_44xx_clkdm = { @@ -482,7 +246,6 @@ static struct clockdomain l3_instr_44xx_clkdm = { .prcm_partition = OMAP4430_CM2_PARTITION, .cm_inst = OMAP4430_CM2_CORE_INST, .clkdm_offs = OMAP4430_CM2_CORE_L3INSTR_CDOFFS, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; static struct clockdomain l3_init_44xx_clkdm = { @@ -495,7 +258,6 @@ static struct clockdomain l3_init_44xx_clkdm = { .wkdep_srcs = l3_init_wkup_sleep_deps, .sleepdep_srcs = l3_init_wkup_sleep_deps, .flags = CLKDM_CAN_HWSUP_SWSUP, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; static struct clockdomain d2d_44xx_clkdm = { @@ -507,7 +269,6 @@ static struct clockdomain d2d_44xx_clkdm = { .wkdep_srcs = d2d_wkup_sleep_deps, .sleepdep_srcs = d2d_wkup_sleep_deps, .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; static struct clockdomain mpu0_44xx_clkdm = { @@ -517,7 +278,6 @@ static struct clockdomain mpu0_44xx_clkdm = { .cm_inst = OMAP4430_PRCM_MPU_CPU0_INST, .clkdm_offs = OMAP4430_PRCM_MPU_CPU0_CPU0_CDOFFS, .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; static struct clockdomain mpu1_44xx_clkdm = { @@ -527,7 +287,6 @@ static struct clockdomain mpu1_44xx_clkdm = { .cm_inst = OMAP4430_PRCM_MPU_CPU1_INST, .clkdm_offs = OMAP4430_PRCM_MPU_CPU1_CPU1_CDOFFS, .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; static struct clockdomain l3_emif_44xx_clkdm = { @@ -538,7 +297,6 @@ static struct clockdomain l3_emif_44xx_clkdm = { .clkdm_offs = OMAP4430_CM2_CORE_MEMIF_CDOFFS, .dep_bit = OMAP4430_MEMIF_STATDEP_SHIFT, .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; static struct clockdomain l4_ao_44xx_clkdm = { @@ -548,7 +306,6 @@ static struct clockdomain l4_ao_44xx_clkdm = { .cm_inst = OMAP4430_CM2_ALWAYS_ON_INST, .clkdm_offs = OMAP4430_CM2_ALWAYS_ON_ALWON_CDOFFS, .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; static struct clockdomain ducati_44xx_clkdm = { @@ -561,7 +318,6 @@ static struct clockdomain ducati_44xx_clkdm = { .wkdep_srcs = ducati_wkup_sleep_deps, .sleepdep_srcs = ducati_wkup_sleep_deps, .flags = CLKDM_CAN_HWSUP_SWSUP, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; static struct clockdomain mpu_44xx_clkdm = { @@ -573,7 +329,6 @@ static struct clockdomain mpu_44xx_clkdm = { .wkdep_srcs = mpu_wkup_sleep_deps, .sleepdep_srcs = mpu_wkup_sleep_deps, .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; static struct clockdomain l3_2_44xx_clkdm = { @@ -584,7 +339,6 @@ static struct clockdomain l3_2_44xx_clkdm = { .clkdm_offs = OMAP4430_CM2_CORE_L3_2_CDOFFS, .dep_bit = OMAP4430_L3_2_STATDEP_SHIFT, .flags = CLKDM_CAN_HWSUP, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; static struct clockdomain l3_1_44xx_clkdm = { @@ -595,7 +349,6 @@ static struct clockdomain l3_1_44xx_clkdm = { .clkdm_offs = OMAP4430_CM2_CORE_L3_1_CDOFFS, .dep_bit = OMAP4430_L3_1_STATDEP_SHIFT, .flags = CLKDM_CAN_HWSUP, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; static struct clockdomain iss_44xx_clkdm = { @@ -607,7 +360,6 @@ static struct clockdomain iss_44xx_clkdm = { .wkdep_srcs = iss_wkup_sleep_deps, .sleepdep_srcs = iss_wkup_sleep_deps, .flags = CLKDM_CAN_HWSUP_SWSUP, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; static struct clockdomain l3_dss_44xx_clkdm = { @@ -620,7 +372,6 @@ static struct clockdomain l3_dss_44xx_clkdm = { .wkdep_srcs = l3_dss_wkup_sleep_deps, .sleepdep_srcs = l3_dss_wkup_sleep_deps, .flags = CLKDM_CAN_HWSUP_SWSUP, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; static struct clockdomain l4_wkup_44xx_clkdm = { @@ -631,7 +382,6 @@ static struct clockdomain l4_wkup_44xx_clkdm = { .clkdm_offs = OMAP4430_PRM_WKUP_CM_WKUP_CDOFFS, .dep_bit = OMAP4430_L4WKUP_STATDEP_SHIFT, .flags = CLKDM_CAN_HWSUP, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; static struct clockdomain emu_sys_44xx_clkdm = { @@ -641,7 +391,6 @@ static struct clockdomain emu_sys_44xx_clkdm = { .cm_inst = OMAP4430_PRM_EMU_CM_INST, .clkdm_offs = OMAP4430_PRM_EMU_CM_EMU_CDOFFS, .flags = CLKDM_CAN_HWSUP, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; static struct clockdomain l3_dma_44xx_clkdm = { @@ -653,7 +402,6 @@ static struct clockdomain l3_dma_44xx_clkdm = { .wkdep_srcs = l3_dma_wkup_sleep_deps, .sleepdep_srcs = l3_dma_wkup_sleep_deps, .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* As clockdomains are added or removed above, this list must also be changed */ @@ -685,7 +433,10 @@ static struct clockdomain *clockdomains_omap44xx[] __initdata = { NULL }; + void __init omap44xx_clockdomains_init(void) { - clkdm_init(clockdomains_omap44xx, NULL, &omap4_clkdm_operations); + clkdm_register_platform_funcs(&omap4_clkdm_operations); + clkdm_register_clkdms(clockdomains_omap44xx); + clkdm_complete_init(); } diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c index 3f20cbb9967..110e5b9db14 100644 --- a/arch/arm/mach-omap2/common.c +++ b/arch/arm/mach-omap2/common.c @@ -45,17 +45,22 @@ static void __init __omap2_set_globals(struct omap_globals *omap2_globals) static struct omap_globals omap242x_globals = { .class = OMAP242X_CLASS, .tap = OMAP2_L4_IO_ADDRESS(0x48014000), - .sdrc = OMAP2420_SDRC_BASE, - .sms = OMAP2420_SMS_BASE, - .ctrl = OMAP242X_CTRL_BASE, - .prm = OMAP2420_PRM_BASE, - .cm = OMAP2420_CM_BASE, + .sdrc = OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE), + .sms = OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE), + .ctrl = OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE), + .prm = OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE), + .cm = OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE), }; void __init omap2_set_globals_242x(void) { __omap2_set_globals(&omap242x_globals); } + +void __init omap242x_map_io(void) +{ + omap242x_map_common_io(); +} #endif #if defined(CONFIG_SOC_OMAP2430) @@ -63,17 +68,22 @@ void __init omap2_set_globals_242x(void) static struct omap_globals omap243x_globals = { .class = OMAP243X_CLASS, .tap = OMAP2_L4_IO_ADDRESS(0x4900a000), - .sdrc = OMAP243X_SDRC_BASE, - .sms = OMAP243X_SMS_BASE, - .ctrl = OMAP243X_CTRL_BASE, - .prm = OMAP2430_PRM_BASE, - .cm = OMAP2430_CM_BASE, + .sdrc = OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE), + .sms = OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE), + .ctrl = OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE), + .prm = OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE), + .cm = OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE), }; void __init omap2_set_globals_243x(void) { __omap2_set_globals(&omap243x_globals); } + +void __init omap243x_map_io(void) +{ + omap243x_map_common_io(); +} #endif #if defined(CONFIG_ARCH_OMAP3) @@ -81,11 +91,11 @@ void __init omap2_set_globals_243x(void) static struct omap_globals omap3_globals = { .class = OMAP343X_CLASS, .tap = OMAP2_L4_IO_ADDRESS(0x4830A000), - .sdrc = OMAP343X_SDRC_BASE, - .sms = OMAP343X_SMS_BASE, - .ctrl = OMAP343X_CTRL_BASE, - .prm = OMAP3430_PRM_BASE, - .cm = OMAP3430_CM_BASE, + .sdrc = OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE), + .sms = OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE), + .ctrl = OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE), + .prm = OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE), + .cm = OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE), }; void __init omap2_set_globals_3xxx(void) @@ -95,7 +105,6 @@ void __init omap2_set_globals_3xxx(void) void __init omap3_map_io(void) { - omap2_set_globals_3xxx(); omap34xx_map_common_io(); } @@ -110,9 +119,9 @@ void __init omap3_map_io(void) static struct omap_globals ti816x_globals = { .class = OMAP343X_CLASS, .tap = OMAP2_L4_IO_ADDRESS(TI816X_TAP_BASE), - .ctrl = TI816X_CTRL_BASE, - .prm = TI816X_PRCM_BASE, - .cm = TI816X_PRCM_BASE, + .ctrl = OMAP2_L4_IO_ADDRESS(TI816X_CTRL_BASE), + .prm = OMAP2_L4_IO_ADDRESS(TI816X_PRCM_BASE), + .cm = OMAP2_L4_IO_ADDRESS(TI816X_PRCM_BASE), }; void __init omap2_set_globals_ti816x(void) @@ -125,11 +134,11 @@ void __init omap2_set_globals_ti816x(void) static struct omap_globals omap4_globals = { .class = OMAP443X_CLASS, .tap = OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE), - .ctrl = OMAP443X_SCM_BASE, - .ctrl_pad = OMAP443X_CTRL_BASE, - .prm = OMAP4430_PRM_BASE, - .cm = OMAP4430_CM_BASE, - .cm2 = OMAP4430_CM2_BASE, + .ctrl = OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE), + .ctrl_pad = OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE), + .prm = OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE), + .cm = OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE), + .cm2 = OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE), }; void __init omap2_set_globals_443x(void) @@ -138,5 +147,10 @@ void __init omap2_set_globals_443x(void) omap2_set_globals_control(&omap4_globals); omap2_set_globals_prcm(&omap4_globals); } + +void __init omap4_map_io(void) +{ + omap44xx_map_common_io(); +} #endif diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index aab884fecc5..e34d27f8c49 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -149,17 +149,11 @@ static struct omap3_control_regs control_context; void __init omap2_set_globals_control(struct omap_globals *omap2_globals) { - /* Static mapping, never released */ - if (omap2_globals->ctrl) { - omap2_ctrl_base = ioremap(omap2_globals->ctrl, SZ_4K); - WARN_ON(!omap2_ctrl_base); - } + if (omap2_globals->ctrl) + omap2_ctrl_base = omap2_globals->ctrl; - /* Static mapping, never released */ - if (omap2_globals->ctrl_pad) { - omap4_ctrl_pad_base = ioremap(omap2_globals->ctrl_pad, SZ_4K); - WARN_ON(!omap4_ctrl_pad_base); - } + if (omap2_globals->ctrl_pad) + omap4_ctrl_pad_base = omap2_globals->ctrl_pad; } void __iomem *omap_ctrl_base_get(void) diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 1077ad663f9..0f8e0eb1816 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -16,6 +16,7 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/slab.h> +#include <linux/of.h> #include <mach/hardware.h> #include <mach/irqs.h> @@ -44,7 +45,7 @@ static int __init omap3_l3_init(void) { int l; struct omap_hwmod *oh; - struct omap_device *od; + struct platform_device *pdev; char oh_name[L3_MODULES_MAX_LEN]; /* @@ -61,12 +62,12 @@ static int __init omap3_l3_init(void) if (!oh) pr_err("could not look up %s\n", oh_name); - od = omap_device_build("omap_l3_smx", 0, oh, NULL, 0, + pdev = omap_device_build("omap_l3_smx", 0, oh, NULL, 0, NULL, 0, 0); - WARN(IS_ERR(od), "could not build omap_device for %s\n", oh_name); + WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name); - return IS_ERR(od) ? PTR_ERR(od) : 0; + return IS_ERR(pdev) ? PTR_ERR(pdev) : 0; } postcore_initcall(omap3_l3_init); @@ -74,9 +75,13 @@ static int __init omap4_l3_init(void) { int l, i; struct omap_hwmod *oh[3]; - struct omap_device *od; + struct platform_device *pdev; char oh_name[L3_MODULES_MAX_LEN]; + /* If dtb is there, the devices will be created dynamically */ + if (of_have_populated_dt()) + return -ENODEV; + /* * To avoid code running on other OMAPs in * multi-omap builds @@ -92,12 +97,12 @@ static int __init omap4_l3_init(void) pr_err("could not look up %s\n", oh_name); } - od = omap_device_build_ss("omap_l3_noc", 0, oh, 3, NULL, + pdev = omap_device_build_ss("omap_l3_noc", 0, oh, 3, NULL, 0, NULL, 0, 0); - WARN(IS_ERR(od), "could not build omap_device for %s\n", oh_name); + WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name); - return IS_ERR(od) ? PTR_ERR(od) : 0; + return IS_ERR(pdev) ? PTR_ERR(pdev) : 0; } postcore_initcall(omap4_l3_init); @@ -221,18 +226,10 @@ static inline void omap_init_camera(void) #endif } -struct omap_device_pm_latency omap_keyboard_latency[] = { - { - .deactivate_func = omap_device_idle_hwmods, - .activate_func = omap_device_enable_hwmods, - .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, - }, -}; - int __init omap4_keyboard_init(struct omap4_keypad_platform_data *sdp4430_keypad_data, struct omap_board_data *bdata) { - struct omap_device *od; + struct platform_device *pdev; struct omap_hwmod *oh; struct omap4_keypad_platform_data *keypad_data; unsigned int id = -1; @@ -247,15 +244,13 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data keypad_data = sdp4430_keypad_data; - od = omap_device_build(name, id, oh, keypad_data, - sizeof(struct omap4_keypad_platform_data), - omap_keyboard_latency, - ARRAY_SIZE(omap_keyboard_latency), 0); + pdev = omap_device_build(name, id, oh, keypad_data, + sizeof(struct omap4_keypad_platform_data), NULL, 0, 0); - if (IS_ERR(od)) { + if (IS_ERR(pdev)) { WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name); - return PTR_ERR(od); + return PTR_ERR(pdev); } oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt); @@ -263,18 +258,10 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data } #if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE) -static struct omap_device_pm_latency mbox_latencies[] = { - [0] = { - .activate_func = omap_device_enable_hwmods, - .deactivate_func = omap_device_idle_hwmods, - .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, - }, -}; - static inline void omap_init_mbox(void) { struct omap_hwmod *oh; - struct omap_device *od; + struct platform_device *pdev; oh = omap_hwmod_lookup("mailbox"); if (!oh) { @@ -282,10 +269,9 @@ static inline void omap_init_mbox(void) return; } - od = omap_device_build("omap-mailbox", -1, oh, NULL, 0, - mbox_latencies, ARRAY_SIZE(mbox_latencies), 0); - WARN(IS_ERR(od), "%s: could not build device, err %ld\n", - __func__, PTR_ERR(od)); + pdev = omap_device_build("omap-mailbox", -1, oh, NULL, 0, NULL, 0, 0); + WARN(IS_ERR(pdev), "%s: could not build device, err %ld\n", + __func__, PTR_ERR(pdev)); } #else static inline void omap_init_mbox(void) { } @@ -334,17 +320,9 @@ static inline void omap_init_audio(void) {} #include <plat/mcspi.h> -struct omap_device_pm_latency omap_mcspi_latency[] = { - [0] = { - .deactivate_func = omap_device_idle_hwmods, - .activate_func = omap_device_enable_hwmods, - .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, - }, -}; - static int omap_mcspi_init(struct omap_hwmod *oh, void *unused) { - struct omap_device *od; + struct platform_device *pdev; char *name = "omap2_mcspi"; struct omap2_mcspi_platform_config *pdata; static int spi_num; @@ -371,10 +349,9 @@ static int omap_mcspi_init(struct omap_hwmod *oh, void *unused) } spi_num++; - od = omap_device_build(name, spi_num, oh, pdata, - sizeof(*pdata), omap_mcspi_latency, - ARRAY_SIZE(omap_mcspi_latency), 0); - WARN(IS_ERR(od), "Can't build omap_device for %s:%s\n", + pdev = omap_device_build(name, spi_num, oh, pdata, + sizeof(*pdata), NULL, 0, 0); + WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s\n", name, oh->name); kfree(pdata); return 0; @@ -698,18 +675,10 @@ static int __init omap2_init_devices(void) arch_initcall(omap2_init_devices); #if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE) -static struct omap_device_pm_latency omap_wdt_latency[] = { - [0] = { - .deactivate_func = omap_device_idle_hwmods, - .activate_func = omap_device_enable_hwmods, - .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, - }, -}; - static int __init omap_init_wdt(void) { int id = -1; - struct omap_device *od; + struct platform_device *pdev; struct omap_hwmod *oh; char *oh_name = "wd_timer2"; char *dev_name = "omap_wdt"; @@ -723,10 +692,8 @@ static int __init omap_init_wdt(void) return -EINVAL; } - od = omap_device_build(dev_name, id, oh, NULL, 0, - omap_wdt_latency, - ARRAY_SIZE(omap_wdt_latency), 0); - WARN(IS_ERR(od), "Can't build omap_device for %s:%s.\n", + pdev = omap_device_build(dev_name, id, oh, NULL, 0, NULL, 0, 0); + WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s.\n", dev_name, oh->name); return 0; } diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index a5b7a236aa5..8ad0a2f0367 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -35,14 +35,6 @@ static struct platform_device omap_display_device = { }, }; -static struct omap_device_pm_latency omap_dss_latency[] = { - [0] = { - .deactivate_func = omap_device_idle_hwmods, - .activate_func = omap_device_enable_hwmods, - .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, - }, -}; - struct omap_dss_hwmod_data { const char *oh_name; const char *dev_name; @@ -78,7 +70,7 @@ int __init omap_display_init(struct omap_dss_board_info *board_data) { int r = 0; struct omap_hwmod *oh; - struct omap_device *od; + struct platform_device *pdev; int i, oh_count; struct omap_display_platform_data pdata; const struct omap_dss_hwmod_data *curr_dss_hwmod; @@ -108,13 +100,12 @@ int __init omap_display_init(struct omap_dss_board_info *board_data) return -ENODEV; } - od = omap_device_build(curr_dss_hwmod[i].dev_name, + pdev = omap_device_build(curr_dss_hwmod[i].dev_name, curr_dss_hwmod[i].id, oh, &pdata, sizeof(struct omap_display_platform_data), - omap_dss_latency, - ARRAY_SIZE(omap_dss_latency), 0); + NULL, 0, 0); - if (WARN((IS_ERR(od)), "Could not build omap_device for %s\n", + if (WARN((IS_ERR(pdev)), "Could not build omap_device for %s\n", curr_dss_hwmod[i].oh_name)) return -ENODEV; } diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index c9ff0e79703..a59a45a0096 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -87,14 +87,6 @@ static u16 reg_map[] = { [CCDN] = 0xd8, }; -static struct omap_device_pm_latency omap2_dma_latency[] = { - { - .deactivate_func = omap_device_idle_hwmods, - .activate_func = omap_device_enable_hwmods, - .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, - }, -}; - static void __iomem *dma_base; static inline void dma_write(u32 val, int reg, int lch) { @@ -228,7 +220,7 @@ static u32 configure_dma_errata(void) /* One time initializations */ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused) { - struct omap_device *od; + struct platform_device *pdev; struct omap_system_dma_plat_info *p; struct resource *mem; char *name = "omap_dma_system"; @@ -258,23 +250,22 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused) p->errata = configure_dma_errata(); - od = omap_device_build(name, 0, oh, p, sizeof(*p), - omap2_dma_latency, ARRAY_SIZE(omap2_dma_latency), 0); + pdev = omap_device_build(name, 0, oh, p, sizeof(*p), NULL, 0, 0); kfree(p); - if (IS_ERR(od)) { + if (IS_ERR(pdev)) { pr_err("%s: Can't build omap_device for %s:%s.\n", __func__, name, oh->name); - return PTR_ERR(od); + return PTR_ERR(pdev); } - mem = platform_get_resource(&od->pdev, IORESOURCE_MEM, 0); + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!mem) { - dev_err(&od->pdev.dev, "%s: no mem resource\n", __func__); + dev_err(&pdev->dev, "%s: no mem resource\n", __func__); return -EINVAL; } dma_base = ioremap(mem->start, resource_size(mem)); if (!dma_base) { - dev_err(&od->pdev.dev, "%s: ioremap fail\n", __func__); + dev_err(&pdev->dev, "%s: ioremap fail\n", __func__); return -ENOMEM; } @@ -283,7 +274,7 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused) (d->lch_count), GFP_KERNEL); if (!d->chan) { - dev_err(&od->pdev.dev, "%s: kzalloc fail\n", __func__); + dev_err(&pdev->dev, "%s: kzalloc fail\n", __func__); return -ENOMEM; } return 0; diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c index 2765cdc3152..8cbfbc2918c 100644 --- a/arch/arm/mach-omap2/gpio.c +++ b/arch/arm/mach-omap2/gpio.c @@ -24,17 +24,9 @@ #include <plat/omap_hwmod.h> #include <plat/omap_device.h> -static struct omap_device_pm_latency omap_gpio_latency[] = { - [0] = { - .deactivate_func = omap_device_idle_hwmods, - .activate_func = omap_device_enable_hwmods, - .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, - }, -}; - static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) { - struct omap_device *od; + struct platform_device *pdev; struct omap_gpio_platform_data *pdata; struct omap_gpio_dev_attr *dev_attr; char *name = "omap_gpio"; @@ -107,19 +99,17 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) return -EINVAL; } - od = omap_device_build(name, id - 1, oh, pdata, - sizeof(*pdata), omap_gpio_latency, - ARRAY_SIZE(omap_gpio_latency), - false); + pdev = omap_device_build(name, id - 1, oh, pdata, + sizeof(*pdata), NULL, 0, false); kfree(pdata); - if (IS_ERR(od)) { + if (IS_ERR(pdev)) { WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name); - return PTR_ERR(od); + return PTR_ERR(pdev); } - omap_device_disable_idle_on_suspend(od); + omap_device_disable_idle_on_suspend(pdev); gpio_bank_count++; return 0; diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index a9b45c76e1d..77085847e4e 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -137,8 +137,7 @@ static void omap4_hsmmc1_before_set_reg(struct device *dev, int slot, */ reg = omap4_ctrl_pad_readl(control_pbias_offset); reg &= ~(OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK | - OMAP4_MMC1_PWRDNZ_MASK | - OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + OMAP4_MMC1_PWRDNZ_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); } @@ -156,8 +155,7 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot, else reg |= OMAP4_MMC1_PBIASLITE_VMODE_MASK; reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK | - OMAP4_MMC1_PWRDNZ_MASK | - OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + OMAP4_MMC1_PWRDNZ_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); timeout = jiffies + msecs_to_jiffies(5); @@ -171,16 +169,14 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot, if (reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK) { pr_err("Pbias Voltage is not same as LDO\n"); /* Caution : On VMODE_ERROR Power Down MMC IO */ - reg &= ~(OMAP4_MMC1_PWRDNZ_MASK | - OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + reg &= ~(OMAP4_MMC1_PWRDNZ_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); } } else { reg = omap4_ctrl_pad_readl(control_pbias_offset); reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK | OMAP4_MMC1_PWRDNZ_MASK | - OMAP4_MMC1_PBIASLITE_VMODE_MASK | - OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + OMAP4_MMC1_PBIASLITE_VMODE_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); } } @@ -413,31 +409,17 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, return 0; } -static struct omap_device_pm_latency omap_hsmmc_latency[] = { - [0] = { - .deactivate_func = omap_device_idle_hwmods, - .activate_func = omap_device_enable_hwmods, - .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, - }, - /* - * XXX There should also be an entry here to power off/on the - * MMC regulators/PBIAS cells, etc. - */ -}; - #define MAX_OMAP_MMC_HWMOD_NAME_LEN 16 void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) { struct omap_hwmod *oh; - struct omap_device *od; - struct omap_device_pm_latency *ohl; + struct platform_device *pdev; char oh_name[MAX_OMAP_MMC_HWMOD_NAME_LEN]; struct omap_mmc_platform_data *mmc_data; struct omap_mmc_dev_attr *mmc_dev_attr; char *name; int l; - int ohl_cnt = 0; mmc_data = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL); if (!mmc_data) { @@ -452,8 +434,6 @@ void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) omap_hsmmc_mux(mmc_data, (ctrl_nr - 1)); name = "omap_hsmmc"; - ohl = omap_hsmmc_latency; - ohl_cnt = ARRAY_SIZE(omap_hsmmc_latency); l = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN, "mmc%d", ctrl_nr); @@ -471,9 +451,9 @@ void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) mmc_data->controller_flags = mmc_dev_attr->flags; } - od = omap_device_build(name, ctrl_nr - 1, oh, mmc_data, - sizeof(struct omap_mmc_platform_data), ohl, ohl_cnt, false); - if (IS_ERR(od)) { + pdev = omap_device_build(name, ctrl_nr - 1, oh, mmc_data, + sizeof(struct omap_mmc_platform_data), NULL, 0, false); + if (IS_ERR(pdev)) { WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name); kfree(mmc_data->slots[0].name); goto done; @@ -482,7 +462,7 @@ void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) * return device handle to board setup code * required to populate for regulator framework structure */ - hsmmcinfo->dev = &od->pdev.dev; + hsmmcinfo->dev = &pdev->dev; done: kfree(mmc_data); diff --git a/arch/arm/mach-omap2/hwspinlock.c b/arch/arm/mach-omap2/hwspinlock.c index 06d4a80660a..36e21091b06 100644 --- a/arch/arm/mach-omap2/hwspinlock.c +++ b/arch/arm/mach-omap2/hwspinlock.c @@ -23,19 +23,11 @@ #include <plat/omap_hwmod.h> #include <plat/omap_device.h> -struct omap_device_pm_latency omap_spinlock_latency[] = { - { - .deactivate_func = omap_device_idle_hwmods, - .activate_func = omap_device_enable_hwmods, - .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, - } -}; - int __init hwspinlocks_init(void) { int retval = 0; struct omap_hwmod *oh; - struct omap_device *od; + struct platform_device *pdev; const char *oh_name = "spinlock"; const char *dev_name = "omap_hwspinlock"; @@ -48,13 +40,11 @@ int __init hwspinlocks_init(void) if (oh == NULL) return -EINVAL; - od = omap_device_build(dev_name, 0, oh, NULL, 0, - omap_spinlock_latency, - ARRAY_SIZE(omap_spinlock_latency), false); - if (IS_ERR(od)) { + pdev = omap_device_build(dev_name, 0, oh, NULL, 0, NULL, 0, false); + if (IS_ERR(pdev)) { pr_err("Can't build omap_device for %s:%s\n", dev_name, oh_name); - retval = PTR_ERR(od); + retval = PTR_ERR(pdev); } return retval; diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 37efb869692..d27daf921c7 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -28,7 +28,6 @@ #include "control.h" -static struct omap_chip_id omap_chip; static unsigned int omap_revision; u32 omap_features; @@ -39,19 +38,6 @@ unsigned int omap_rev(void) } EXPORT_SYMBOL(omap_rev); -/** - * omap_chip_is - test whether currently running OMAP matches a chip type - * @oc: omap_chip_t to test against - * - * Test whether the currently-running OMAP chip matches the supplied - * chip type 'oc'. Returns 1 upon a match; 0 upon failure. - */ -int omap_chip_is(struct omap_chip_id oci) -{ - return (oci.oc & omap_chip.oc) ? 1 : 0; -} -EXPORT_SYMBOL(omap_chip_is); - int omap_type(void) { u32 val = 0; @@ -242,14 +228,12 @@ static void __init ti816x_check_features(void) omap_features = OMAP3_HAS_NEON; } -static void __init omap3_check_revision(void) +static void __init omap3_check_revision(const char **cpu_rev) { u32 cpuid, idcode; u16 hawkeye; u8 rev; - omap_chip.oc = CHIP_IS_OMAP3430; - /* * We cannot access revision registers on ES1.0. * If the processor type is Cortex-A8 and the revision is 0x0 @@ -258,7 +242,7 @@ static void __init omap3_check_revision(void) cpuid = read_cpuid(CPUID_ID); if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) { omap_revision = OMAP3430_REV_ES1_0; - omap_chip.oc |= CHIP_IS_OMAP3430ES1; + *cpu_rev = "1.0"; return; } @@ -279,77 +263,85 @@ static void __init omap3_check_revision(void) case 0: /* Take care of early samples */ case 1: omap_revision = OMAP3430_REV_ES2_0; - omap_chip.oc |= CHIP_IS_OMAP3430ES2; + *cpu_rev = "2.0"; break; case 2: omap_revision = OMAP3430_REV_ES2_1; - omap_chip.oc |= CHIP_IS_OMAP3430ES2; + *cpu_rev = "2.1"; break; case 3: omap_revision = OMAP3430_REV_ES3_0; - omap_chip.oc |= CHIP_IS_OMAP3430ES3_0; + *cpu_rev = "3.0"; break; case 4: omap_revision = OMAP3430_REV_ES3_1; - omap_chip.oc |= CHIP_IS_OMAP3430ES3_1; + *cpu_rev = "3.1"; break; case 7: /* FALLTHROUGH */ default: /* Use the latest known revision as default */ omap_revision = OMAP3430_REV_ES3_1_2; - - /* REVISIT: Add CHIP_IS_OMAP3430ES3_1_2? */ - omap_chip.oc |= CHIP_IS_OMAP3430ES3_1; + *cpu_rev = "3.1.2"; } break; case 0xb868: - /* Handle OMAP35xx/AM35xx devices + /* + * Handle OMAP/AM 3505/3517 devices * - * Set the device to be OMAP3505 here. Actual device + * Set the device to be OMAP3517 here. Actual device * is identified later based on the features. - * - * REVISIT: AM3505/AM3517 should have their own CHIP_IS */ - omap_revision = OMAP3505_REV(rev); - omap_chip.oc |= CHIP_IS_OMAP3430ES3_1; + switch (rev) { + case 0: + omap_revision = OMAP3517_REV_ES1_0; + *cpu_rev = "1.0"; + break; + case 1: + /* FALLTHROUGH */ + default: + omap_revision = OMAP3517_REV_ES1_1; + *cpu_rev = "1.1"; + } break; case 0xb891: /* Handle 36xx devices */ - omap_chip.oc |= CHIP_IS_OMAP3630ES1; switch(rev) { case 0: /* Take care of early samples */ omap_revision = OMAP3630_REV_ES1_0; + *cpu_rev = "1.0"; break; case 1: omap_revision = OMAP3630_REV_ES1_1; - omap_chip.oc |= CHIP_IS_OMAP3630ES1_1; + *cpu_rev = "1.1"; break; case 2: + /* FALLTHROUGH */ default: - omap_revision = OMAP3630_REV_ES1_2; - omap_chip.oc |= CHIP_IS_OMAP3630ES1_2; + omap_revision = OMAP3630_REV_ES1_2; + *cpu_rev = "1.2"; } break; case 0xb81e: - omap_chip.oc = CHIP_IS_TI816X; - switch (rev) { case 0: omap_revision = TI8168_REV_ES1_0; + *cpu_rev = "1.0"; break; case 1: + /* FALLTHROUGH */ + default: omap_revision = TI8168_REV_ES1_1; + *cpu_rev = "1.1"; break; - default: - omap_revision = TI8168_REV_ES1_1; } break; default: - /* Unknown default to latest silicon rev as default*/ - omap_revision = OMAP3630_REV_ES1_2; - omap_chip.oc |= CHIP_IS_OMAP3630ES1_2; + /* Unknown default to latest silicon rev as default */ + omap_revision = OMAP3630_REV_ES1_2; + *cpu_rev = "1.2"; + pr_warn("Warning: unknown chip type; assuming OMAP3630ES1.2\n"); } } @@ -382,24 +374,20 @@ static void __init omap4_check_revision(void) switch (rev) { case 0: omap_revision = OMAP4430_REV_ES1_0; - omap_chip.oc |= CHIP_IS_OMAP4430ES1; break; case 1: default: omap_revision = OMAP4430_REV_ES2_0; - omap_chip.oc |= CHIP_IS_OMAP4430ES2; } break; case 0xb95c: switch (rev) { case 3: omap_revision = OMAP4430_REV_ES2_1; - omap_chip.oc |= CHIP_IS_OMAP4430ES2_1; break; case 4: default: omap_revision = OMAP4430_REV_ES2_2; - omap_chip.oc |= CHIP_IS_OMAP4430ES2_2; } break; case 0xb94e: @@ -407,14 +395,12 @@ static void __init omap4_check_revision(void) case 0: default: omap_revision = OMAP4460_REV_ES1_0; - omap_chip.oc |= CHIP_IS_OMAP4460ES1_0; break; } break; default: /* Unknown default to latest silicon rev as default */ omap_revision = OMAP4430_REV_ES2_2; - omap_chip.oc |= CHIP_IS_OMAP4430ES2_2; } pr_info("OMAP%04x ES%d.%d\n", omap_rev() >> 16, @@ -425,94 +411,33 @@ static void __init omap4_check_revision(void) if (omap3_has_ ##feat()) \ printk(#feat" "); -static void __init omap3_cpuinfo(void) +static void __init omap3_cpuinfo(const char *cpu_rev) { - u8 rev = GET_OMAP_REVISION(); - char cpu_name[16], cpu_rev[16]; + const char *cpu_name; - /* OMAP3430 and OMAP3530 are assumed to be same. + /* + * OMAP3430 and OMAP3530 are assumed to be same. * * OMAP3525, OMAP3515 and OMAP3503 can be detected only based * on available features. Upon detection, update the CPU id * and CPU class bits. */ if (cpu_is_omap3630()) { - strcpy(cpu_name, "OMAP3630"); - } else if (cpu_is_omap3505()) { - /* - * AM35xx devices - */ - if (omap3_has_sgx()) { - omap_revision = OMAP3517_REV(rev); - strcpy(cpu_name, "AM3517"); - } else { - /* Already set in omap3_check_revision() */ - strcpy(cpu_name, "AM3505"); - } + cpu_name = "OMAP3630"; + } else if (cpu_is_omap3517()) { + /* AM35xx devices */ + cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505"; } else if (cpu_is_ti816x()) { - strcpy(cpu_name, "TI816X"); + cpu_name = "TI816X"; } else if (omap3_has_iva() && omap3_has_sgx()) { /* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */ - strcpy(cpu_name, "OMAP3430/3530"); + cpu_name = "OMAP3430/3530"; } else if (omap3_has_iva()) { - omap_revision = OMAP3525_REV(rev); - strcpy(cpu_name, "OMAP3525"); + cpu_name = "OMAP3525"; } else if (omap3_has_sgx()) { - omap_revision = OMAP3515_REV(rev); - strcpy(cpu_name, "OMAP3515"); + cpu_name = "OMAP3515"; } else { - omap_revision = OMAP3503_REV(rev); - strcpy(cpu_name, "OMAP3503"); - } - - if (cpu_is_omap3630() || cpu_is_ti816x()) { - switch (rev) { - case OMAP_REVBITS_00: - strcpy(cpu_rev, "1.0"); - break; - case OMAP_REVBITS_01: - strcpy(cpu_rev, "1.1"); - break; - case OMAP_REVBITS_02: - /* FALLTHROUGH */ - default: - /* Use the latest known revision as default */ - strcpy(cpu_rev, "1.2"); - } - } else if (cpu_is_omap3505() || cpu_is_omap3517()) { - switch (rev) { - case OMAP_REVBITS_00: - strcpy(cpu_rev, "1.0"); - break; - case OMAP_REVBITS_01: - /* FALLTHROUGH */ - default: - /* Use the latest known revision as default */ - strcpy(cpu_rev, "1.1"); - } - } else { - switch (rev) { - case OMAP_REVBITS_00: - strcpy(cpu_rev, "1.0"); - break; - case OMAP_REVBITS_01: - strcpy(cpu_rev, "2.0"); - break; - case OMAP_REVBITS_02: - strcpy(cpu_rev, "2.1"); - break; - case OMAP_REVBITS_03: - strcpy(cpu_rev, "3.0"); - break; - case OMAP_REVBITS_04: - strcpy(cpu_rev, "3.1"); - break; - case OMAP_REVBITS_05: - /* FALLTHROUGH */ - default: - /* Use the latest known revision as default */ - strcpy(cpu_rev, "3.1.2"); - } + cpu_name = "OMAP3503"; } /* Print verbose information */ @@ -533,6 +458,8 @@ static void __init omap3_cpuinfo(void) */ void __init omap2_check_revision(void) { + const char *cpu_rev; + /* * At this point we have an idea about the processor revision set * earlier with omap2_set_globals_tap(). @@ -540,7 +467,7 @@ void __init omap2_check_revision(void) if (cpu_is_omap24xx()) { omap24xx_check_revision(); } else if (cpu_is_omap34xx()) { - omap3_check_revision(); + omap3_check_revision(&cpu_rev); /* TI816X doesn't have feature register */ if (!cpu_is_ti816x()) @@ -548,7 +475,7 @@ void __init omap2_check_revision(void) else ti816x_check_features(); - omap3_cpuinfo(); + omap3_cpuinfo(cpu_rev); return; } else if (cpu_is_omap44xx()) { omap4_check_revision(); @@ -557,22 +484,6 @@ void __init omap2_check_revision(void) } else { pr_err("OMAP revision unknown, please fix!\n"); } - - /* - * OK, now we know the exact revision. Initialize omap_chip bits - * for powerdowmain and clockdomain code. - */ - if (cpu_is_omap243x()) { - /* Currently only supports 2430ES2.1 and 2430-all */ - omap_chip.oc |= CHIP_IS_OMAP2430; - return; - } else if (cpu_is_omap242x()) { - /* Currently only supports 2420ES2.1.1 and 2420-all */ - omap_chip.oc |= CHIP_IS_OMAP2420; - return; - } - - pr_err("Uninitialized omap_chip, please fix!\n"); } /* diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index d6d01cb7f28..a5d8dce2a70 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -34,14 +34,16 @@ #include "clock2xxx.h" #include "clock3xxx.h" #include "clock44xx.h" -#include "io.h" +#include <plat/common.h> #include <plat/omap-pm.h> +#include "voltage.h" #include "powerdomain.h" #include "clockdomain.h" #include <plat/omap_hwmod.h> #include <plat/multi.h> +#include <plat/common.h> /* * The machine specific code may provide the extra mapping besides the @@ -238,26 +240,11 @@ static struct map_desc omap44xx_io_desc[] __initdata = { }; #endif -static void __init _omap2_map_common_io(void) -{ - /* Normally devicemaps_init() would flush caches and tlb after - * mdesc->map_io(), but we must also do it here because of the CPU - * revision check below. - */ - local_flush_tlb_all(); - flush_cache_all(); - - omap2_check_revision(); - omap_sram_init(); - omap_init_consistent_dma_size(); -} - #ifdef CONFIG_SOC_OMAP2420 void __init omap242x_map_common_io(void) { iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc)); iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc)); - _omap2_map_common_io(); } #endif @@ -266,7 +253,6 @@ void __init omap243x_map_common_io(void) { iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc)); iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc)); - _omap2_map_common_io(); } #endif @@ -274,7 +260,6 @@ void __init omap243x_map_common_io(void) void __init omap34xx_map_common_io(void) { iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc)); - _omap2_map_common_io(); } #endif @@ -282,7 +267,6 @@ void __init omap34xx_map_common_io(void) void __init omapti816x_map_common_io(void) { iotable_init(omapti816x_io_desc, ARRAY_SIZE(omapti816x_io_desc)); - _omap2_map_common_io(); } #endif @@ -290,7 +274,6 @@ void __init omapti816x_map_common_io(void) void __init omap44xx_map_common_io(void) { iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc)); - _omap2_map_common_io(); } #endif @@ -336,29 +319,16 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data) /* See irq.c, omap4-common.c and entry-macro.S */ void __iomem *omap_irq_base; -void __init omap2_init_common_infrastructure(void) +static void __init omap_common_init_early(void) { - u8 postsetup_state; + omap2_check_revision(); + omap_ioremap_init(); + omap_init_consistent_dma_size(); +} - if (cpu_is_omap242x()) { - omap2xxx_powerdomains_init(); - omap2xxx_clockdomains_init(); - omap2420_hwmod_init(); - } else if (cpu_is_omap243x()) { - omap2xxx_powerdomains_init(); - omap2xxx_clockdomains_init(); - omap2430_hwmod_init(); - } else if (cpu_is_omap34xx()) { - omap3xxx_powerdomains_init(); - omap3xxx_clockdomains_init(); - omap3xxx_hwmod_init(); - } else if (cpu_is_omap44xx()) { - omap44xx_powerdomains_init(); - omap44xx_clockdomains_init(); - omap44xx_hwmod_init(); - } else { - pr_err("Could not init hwmod data - unknown SoC\n"); - } +static void __init omap_hwmod_init_postsetup(void) +{ + u8 postsetup_state; /* Set the default postsetup state for all hwmods */ #ifdef CONFIG_PM_RUNTIME @@ -376,7 +346,7 @@ void __init omap2_init_common_infrastructure(void) * omap_hwmod_late_init(), so boards that desire full watchdog * coverage of kernel initialization can reprogram the * postsetup_state between the calls to - * omap2_init_common_infra() and omap2_init_common_devices(). + * omap2_init_common_infra() and omap_sdrc_init(). * * XXX ideally we could detect whether the MPU WDT was currently * enabled here and make this conditional @@ -387,27 +357,101 @@ void __init omap2_init_common_infrastructure(void) &postsetup_state); omap_pm_if_early_init(); +} - if (cpu_is_omap2420()) - omap2420_clk_init(); - else if (cpu_is_omap2430()) - omap2430_clk_init(); - else if (cpu_is_omap34xx()) - omap3xxx_clk_init(); - else if (cpu_is_omap44xx()) - omap4xxx_clk_init(); - else - pr_err("Could not init clock framework - unknown SoC\n"); +void __init omap2420_init_early(void) +{ + omap2_set_globals_242x(); + omap_common_init_early(); + omap2xxx_voltagedomains_init(); + omap242x_powerdomains_init(); + omap242x_clockdomains_init(); + omap2420_hwmod_init(); + omap_hwmod_init_postsetup(); + omap2420_clk_init(); } -void __init omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0, +void __init omap2430_init_early(void) +{ + omap2_set_globals_243x(); + omap_common_init_early(); + omap2xxx_voltagedomains_init(); + omap243x_powerdomains_init(); + omap243x_clockdomains_init(); + omap2430_hwmod_init(); + omap_hwmod_init_postsetup(); + omap2430_clk_init(); +} + +/* + * Currently only board-omap3beagle.c should call this because of the + * same machine_id for 34xx and 36xx beagle.. Will get fixed with DT. + */ +void __init omap3_init_early(void) +{ + omap2_set_globals_3xxx(); + omap_common_init_early(); + omap3xxx_voltagedomains_init(); + omap3xxx_powerdomains_init(); + omap3xxx_clockdomains_init(); + omap3xxx_hwmod_init(); + omap_hwmod_init_postsetup(); + omap3xxx_clk_init(); +} + +void __init omap3430_init_early(void) +{ + omap3_init_early(); +} + +void __init omap35xx_init_early(void) +{ + omap3_init_early(); +} + +void __init omap3630_init_early(void) +{ + omap3_init_early(); +} + +void __init am35xx_init_early(void) +{ + omap3_init_early(); +} + +void __init ti816x_init_early(void) +{ + omap2_set_globals_ti816x(); + omap_common_init_early(); + omap3xxx_voltagedomains_init(); + omap3xxx_powerdomains_init(); + omap3xxx_clockdomains_init(); + omap3xxx_hwmod_init(); + omap_hwmod_init_postsetup(); + omap3xxx_clk_init(); +} + +void __init omap4430_init_early(void) +{ + omap2_set_globals_443x(); + omap_common_init_early(); + omap44xx_voltagedomains_init(); + omap44xx_powerdomains_init(); + omap44xx_clockdomains_init(); + omap44xx_hwmod_init(); + omap_hwmod_init_postsetup(); + omap4xxx_clk_init(); +} + +void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0, struct omap_sdrc_params *sdrc_cs1) { + omap_sram_init(); + if (cpu_is_omap24xx() || omap3_has_sdrc()) { omap2_sdrc_init(sdrc_cs0, sdrc_cs1); _omap2_init_reprogram_sdrc(); } - } /* diff --git a/arch/arm/mach-omap2/io.h b/arch/arm/mach-omap2/io.h index fd230c6cded..e69de29bb2d 100644 --- a/arch/arm/mach-omap2/io.h +++ b/arch/arm/mach-omap2/io.h @@ -1,7 +0,0 @@ - -#ifndef __MACH_OMAP2_IO_H__ -#define __MACH_OMAP2_IO_H__ - -extern int __init omap_sram_init(void); - -#endif /* __MACH_OMAP2_IO_H__ */ diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 3a12f7586a4..65f1be6a182 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -165,8 +165,8 @@ static void __init omap_init_irq(u32 base, int nr_irqs) omap_irq_bank_init_one(bank); - for (i = 0, j = 0; i < bank->nr_irqs; i += 32, j += 0x20) - omap_alloc_gc(bank->base_reg + j, i, 32); + for (j = 0; j < bank->nr_irqs; j += 32) + omap_alloc_gc(bank->base_reg + j, j, 32); nr_of_irqs += bank->nr_irqs; nr_banks++; diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 4a6ef6ab845..292eee3be15 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -27,66 +27,69 @@ #include "control.h" -/* McBSP internal signal muxing functions */ +/* + * FIXME: Find a mechanism to enable/disable runtime the McBSP ICLK autoidle. + * Sidetone needs non-gated ICLK and sidetone autoidle is broken. + */ +#include "cm2xxx_3xxx.h" +#include "cm-regbits-34xx.h" -void omap2_mcbsp1_mux_clkr_src(u8 mux) +/* McBSP internal signal muxing function */ +static int omap2_mcbsp1_mux_rx_clk(struct device *dev, const char *signal, + const char *src) { u32 v; v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - if (mux == CLKR_SRC_CLKR) - v &= ~OMAP2_MCBSP1_CLKR_MASK; - else if (mux == CLKR_SRC_CLKX) - v |= OMAP2_MCBSP1_CLKR_MASK; - omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0); -} -EXPORT_SYMBOL(omap2_mcbsp1_mux_clkr_src); -void omap2_mcbsp1_mux_fsr_src(u8 mux) -{ - u32 v; + if (!strcmp(signal, "clkr")) { + if (!strcmp(src, "clkr")) + v &= ~OMAP2_MCBSP1_CLKR_MASK; + else if (!strcmp(src, "clkx")) + v |= OMAP2_MCBSP1_CLKR_MASK; + else + return -EINVAL; + } else if (!strcmp(signal, "fsr")) { + if (!strcmp(src, "fsr")) + v &= ~OMAP2_MCBSP1_FSR_MASK; + else if (!strcmp(src, "fsx")) + v |= OMAP2_MCBSP1_FSR_MASK; + else + return -EINVAL; + } else { + return -EINVAL; + } - v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - if (mux == FSR_SRC_FSR) - v &= ~OMAP2_MCBSP1_FSR_MASK; - else if (mux == FSR_SRC_FSX) - v |= OMAP2_MCBSP1_FSR_MASK; omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0); + + return 0; } -EXPORT_SYMBOL(omap2_mcbsp1_mux_fsr_src); /* McBSP CLKS source switching function */ - -int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id) +static int omap2_mcbsp_set_clk_src(struct device *dev, struct clk *clk, + const char *src) { - struct omap_mcbsp *mcbsp; struct clk *fck_src; char *fck_src_name; int r; - if (!omap_mcbsp_check_valid_id(id)) { - pr_err("%s: Invalid id (%d)\n", __func__, id + 1); - return -EINVAL; - } - mcbsp = id_to_mcbsp_ptr(id); - - if (fck_src_id == MCBSP_CLKS_PAD_SRC) + if (!strcmp(src, "clks_ext")) fck_src_name = "pad_fck"; - else if (fck_src_id == MCBSP_CLKS_PRCM_SRC) + else if (!strcmp(src, "clks_fclk")) fck_src_name = "prcm_fck"; else return -EINVAL; - fck_src = clk_get(mcbsp->dev, fck_src_name); + fck_src = clk_get(dev, fck_src_name); if (IS_ERR_OR_NULL(fck_src)) { pr_err("omap-mcbsp: %s: could not clk_get() %s\n", "clks", fck_src_name); return -EINVAL; } - pm_runtime_put_sync(mcbsp->dev); + pm_runtime_put_sync(dev); - r = clk_set_parent(mcbsp->fclk, fck_src); + r = clk_set_parent(clk, fck_src); if (IS_ERR_VALUE(r)) { pr_err("omap-mcbsp: %s: could not clk_set_parent() to %s\n", "clks", fck_src_name); @@ -94,21 +97,30 @@ int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id) return -EINVAL; } - pm_runtime_get_sync(mcbsp->dev); + pm_runtime_get_sync(dev); clk_put(fck_src); return 0; } -EXPORT_SYMBOL(omap2_mcbsp_set_clks_src); -struct omap_device_pm_latency omap2_mcbsp_latency[] = { - { - .deactivate_func = omap_device_idle_hwmods, - .activate_func = omap_device_enable_hwmods, - .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, - }, -}; +static int omap3_enable_st_clock(unsigned int id, bool enable) +{ + unsigned int w; + + /* + * Sidetone uses McBSP ICLK - which must not idle when sidetones + * are enabled or sidetones start sounding ugly. + */ + w = omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE); + if (enable) + w &= ~(1 << (id - 2)); + else + w |= 1 << (id - 2); + omap2_cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE); + + return 0; +} static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) { @@ -116,7 +128,7 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) char *name = "omap-mcbsp"; struct omap_hwmod *oh_device[2]; struct omap_mcbsp_platform_data *pdata = NULL; - struct omap_device *od; + struct platform_device *pdev; sscanf(oh->name, "mcbsp%d", &id); @@ -126,7 +138,13 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) return -ENOMEM; } - pdata->mcbsp_config_type = oh->class->rev; + pdata->reg_step = 4; + if (oh->class->rev < MCBSP_CONFIG_TYPE2) { + pdata->reg_size = 2; + } else { + pdata->reg_size = 4; + pdata->has_ccr = true; + } if (oh->class->rev == MCBSP_CONFIG_TYPE3) { if (id == 2) @@ -137,22 +155,28 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) pdata->buffer_size = 0x80; } + if (oh->class->rev >= MCBSP_CONFIG_TYPE3) + pdata->has_wakeup = true; + oh_device[0] = oh; if (oh->dev_attr) { oh_device[1] = omap_hwmod_lookup(( (struct omap_mcbsp_dev_attr *)(oh->dev_attr))->sidetone); + pdata->enable_st_clock = omap3_enable_st_clock; count++; } - od = omap_device_build_ss(name, id, oh_device, count, pdata, - sizeof(*pdata), omap2_mcbsp_latency, - ARRAY_SIZE(omap2_mcbsp_latency), false); + pdev = omap_device_build_ss(name, id, oh_device, count, pdata, + sizeof(*pdata), NULL, 0, false); kfree(pdata); - if (IS_ERR(od)) { + if (IS_ERR(pdev)) { pr_err("%s: Can't build omap_device for %s:%s.\n", __func__, name, oh->name); - return PTR_ERR(od); + return PTR_ERR(pdev); } + pdata->set_clk_src = omap2_mcbsp_set_clk_src; + if (id == 1) + pdata->mux_signal = omap2_mcbsp1_mux_rx_clk; omap_mcbsp_count++; return 0; } diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index ce65e9329c7..11e25a4c4bd 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -102,8 +102,11 @@ void __init smp_init_cpus(void) { unsigned int i, ncores; - /* Never released */ - scu_base = ioremap(OMAP44XX_SCU_BASE, SZ_256); + /* + * Currently we can't call ioremap here because + * SoC detection won't work until after init_early. + */ + scu_base = OMAP2_L4_IO_ADDRESS(OMAP44XX_SCU_BASE); BUG_ON(!scu_base); ncores = scu_get_core_count(scu_base); diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 84cc0bdda3a..d7138070508 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1954,9 +1954,6 @@ int __init omap_hwmod_register(struct omap_hwmod **ohs) i = 0; do { - if (!omap_chip_is(ohs[i]->omap_chip)) - continue; - r = _register(ohs[i]); WARN(r, "omap_hwmod: %s: _register returned %d\n", ohs[i]->name, r); diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index a015c69068f..6d720621352 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -100,7 +100,6 @@ static struct omap_hwmod omap2420_l3_main_hwmod = { .masters_cnt = ARRAY_SIZE(omap2420_l3_main_masters), .slaves = omap2420_l3_main_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_l3_main_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), .flags = HWMOD_NO_IDLEST, }; @@ -206,7 +205,6 @@ static struct omap_hwmod omap2420_l4_core_hwmod = { .masters_cnt = ARRAY_SIZE(omap2420_l4_core_masters), .slaves = omap2420_l4_core_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_l4_core_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), .flags = HWMOD_NO_IDLEST, }; @@ -227,7 +225,6 @@ static struct omap_hwmod omap2420_l4_wkup_hwmod = { .masters_cnt = ARRAY_SIZE(omap2420_l4_wkup_masters), .slaves = omap2420_l4_wkup_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_l4_wkup_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), .flags = HWMOD_NO_IDLEST, }; @@ -243,7 +240,6 @@ static struct omap_hwmod omap2420_mpu_hwmod = { .main_clk = "mpu_ck", .masters = omap2420_mpu_masters, .masters_cnt = ARRAY_SIZE(omap2420_mpu_masters), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), }; /* @@ -271,7 +267,16 @@ static struct omap_hwmod omap2420_iva_hwmod = { .class = &iva_hwmod_class, .masters = omap2420_iva_masters, .masters_cnt = ARRAY_SIZE(omap2420_iva_masters), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) +}; + +/* always-on timers dev attribute */ +static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = { + .timer_capability = OMAP_TIMER_ALWON, +}; + +/* pwm timers dev attribute */ +static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = { + .timer_capability = OMAP_TIMER_HAS_PWM, }; /* timer1 */ @@ -314,10 +319,10 @@ static struct omap_hwmod omap2420_timer1_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT1_SHIFT, }, }, + .dev_attr = &capability_alwon_dev_attr, .slaves = omap2420_timer1_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_timer1_slaves), .class = &omap2xxx_timer_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) }; /* timer2 */ @@ -351,10 +356,10 @@ static struct omap_hwmod omap2420_timer2_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT2_SHIFT, }, }, + .dev_attr = &capability_alwon_dev_attr, .slaves = omap2420_timer2_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_timer2_slaves), .class = &omap2xxx_timer_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) }; /* timer3 */ @@ -388,10 +393,10 @@ static struct omap_hwmod omap2420_timer3_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT3_SHIFT, }, }, + .dev_attr = &capability_alwon_dev_attr, .slaves = omap2420_timer3_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_timer3_slaves), .class = &omap2xxx_timer_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) }; /* timer4 */ @@ -425,10 +430,10 @@ static struct omap_hwmod omap2420_timer4_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT4_SHIFT, }, }, + .dev_attr = &capability_alwon_dev_attr, .slaves = omap2420_timer4_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_timer4_slaves), .class = &omap2xxx_timer_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) }; /* timer5 */ @@ -462,10 +467,10 @@ static struct omap_hwmod omap2420_timer5_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT, }, }, + .dev_attr = &capability_alwon_dev_attr, .slaves = omap2420_timer5_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_timer5_slaves), .class = &omap2xxx_timer_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) }; @@ -500,10 +505,10 @@ static struct omap_hwmod omap2420_timer6_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT, }, }, + .dev_attr = &capability_alwon_dev_attr, .slaves = omap2420_timer6_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_timer6_slaves), .class = &omap2xxx_timer_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) }; /* timer7 */ @@ -537,10 +542,10 @@ static struct omap_hwmod omap2420_timer7_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT, }, }, + .dev_attr = &capability_alwon_dev_attr, .slaves = omap2420_timer7_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_timer7_slaves), .class = &omap2xxx_timer_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) }; /* timer8 */ @@ -574,10 +579,10 @@ static struct omap_hwmod omap2420_timer8_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT, }, }, + .dev_attr = &capability_alwon_dev_attr, .slaves = omap2420_timer8_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_timer8_slaves), .class = &omap2xxx_timer_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) }; /* timer9 */ @@ -611,10 +616,10 @@ static struct omap_hwmod omap2420_timer9_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT9_SHIFT, }, }, + .dev_attr = &capability_pwm_dev_attr, .slaves = omap2420_timer9_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_timer9_slaves), .class = &omap2xxx_timer_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) }; /* timer10 */ @@ -648,10 +653,10 @@ static struct omap_hwmod omap2420_timer10_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT10_SHIFT, }, }, + .dev_attr = &capability_pwm_dev_attr, .slaves = omap2420_timer10_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_timer10_slaves), .class = &omap2xxx_timer_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) }; /* timer11 */ @@ -685,10 +690,10 @@ static struct omap_hwmod omap2420_timer11_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT11_SHIFT, }, }, + .dev_attr = &capability_pwm_dev_attr, .slaves = omap2420_timer11_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_timer11_slaves), .class = &omap2xxx_timer_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) }; /* timer12 */ @@ -722,10 +727,10 @@ static struct omap_hwmod omap2420_timer12_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT12_SHIFT, }, }, + .dev_attr = &capability_pwm_dev_attr, .slaves = omap2420_timer12_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_timer12_slaves), .class = &omap2xxx_timer_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) }; /* l4_wkup -> wd_timer2 */ @@ -766,7 +771,6 @@ static struct omap_hwmod omap2420_wd_timer2_hwmod = { }, .slaves = omap2420_wd_timer2_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_wd_timer2_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), }; /* UART1 */ @@ -792,7 +796,6 @@ static struct omap_hwmod omap2420_uart1_hwmod = { .slaves = omap2420_uart1_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_uart1_slaves), .class = &omap2_uart_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), }; /* UART2 */ @@ -818,7 +821,6 @@ static struct omap_hwmod omap2420_uart2_hwmod = { .slaves = omap2420_uart2_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_uart2_slaves), .class = &omap2_uart_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), }; /* UART3 */ @@ -844,7 +846,6 @@ static struct omap_hwmod omap2420_uart3_hwmod = { .slaves = omap2420_uart3_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_uart3_slaves), .class = &omap2_uart_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), }; /* dss */ @@ -898,7 +899,6 @@ static struct omap_hwmod omap2420_dss_core_hwmod = { .slaves_cnt = ARRAY_SIZE(omap2420_dss_slaves), .masters = omap2420_dss_masters, .masters_cnt = ARRAY_SIZE(omap2420_dss_masters), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), .flags = HWMOD_NO_IDLEST, }; @@ -938,7 +938,6 @@ static struct omap_hwmod omap2420_dss_dispc_hwmod = { }, .slaves = omap2420_dss_dispc_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_dss_dispc_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), .flags = HWMOD_NO_IDLEST, }; @@ -975,7 +974,6 @@ static struct omap_hwmod omap2420_dss_rfbi_hwmod = { }, .slaves = omap2420_dss_rfbi_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_dss_rfbi_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), .flags = HWMOD_NO_IDLEST, }; @@ -1013,7 +1011,6 @@ static struct omap_hwmod omap2420_dss_venc_hwmod = { }, .slaves = omap2420_dss_venc_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_dss_venc_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), .flags = HWMOD_NO_IDLEST, }; @@ -1064,7 +1061,6 @@ static struct omap_hwmod omap2420_i2c1_hwmod = { .slaves_cnt = ARRAY_SIZE(omap2420_i2c1_slaves), .class = &i2c_class, .dev_attr = &i2c_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), .flags = HWMOD_16BIT_REG, }; @@ -1092,7 +1088,6 @@ static struct omap_hwmod omap2420_i2c2_hwmod = { .slaves_cnt = ARRAY_SIZE(omap2420_i2c2_slaves), .class = &i2c_class, .dev_attr = &i2c_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), .flags = HWMOD_16BIT_REG, }; @@ -1197,7 +1192,6 @@ static struct omap_hwmod omap2420_gpio1_hwmod = { .slaves_cnt = ARRAY_SIZE(omap2420_gpio1_slaves), .class = &omap2xxx_gpio_hwmod_class, .dev_attr = &gpio_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), }; /* gpio2 */ @@ -1223,7 +1217,6 @@ static struct omap_hwmod omap2420_gpio2_hwmod = { .slaves_cnt = ARRAY_SIZE(omap2420_gpio2_slaves), .class = &omap2xxx_gpio_hwmod_class, .dev_attr = &gpio_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), }; /* gpio3 */ @@ -1249,7 +1242,6 @@ static struct omap_hwmod omap2420_gpio3_hwmod = { .slaves_cnt = ARRAY_SIZE(omap2420_gpio3_slaves), .class = &omap2xxx_gpio_hwmod_class, .dev_attr = &gpio_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), }; /* gpio4 */ @@ -1275,7 +1267,6 @@ static struct omap_hwmod omap2420_gpio4_hwmod = { .slaves_cnt = ARRAY_SIZE(omap2420_gpio4_slaves), .class = &omap2xxx_gpio_hwmod_class, .dev_attr = &gpio_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), }; /* dma attributes */ @@ -1322,7 +1313,6 @@ static struct omap_hwmod omap2420_dma_system_hwmod = { .masters = omap2420_dma_system_masters, .masters_cnt = ARRAY_SIZE(omap2420_dma_system_masters), .dev_attr = &dma_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), .flags = HWMOD_NO_IDLEST, }; @@ -1363,7 +1353,6 @@ static struct omap_hwmod omap2420_mailbox_hwmod = { }, .slaves = omap2420_mailbox_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_mailbox_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), }; /* mcspi1 */ @@ -1393,7 +1382,6 @@ static struct omap_hwmod omap2420_mcspi1_hwmod = { .slaves_cnt = ARRAY_SIZE(omap2420_mcspi1_slaves), .class = &omap2xxx_mcspi_class, .dev_attr = &omap_mcspi1_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), }; /* mcspi2 */ @@ -1423,7 +1411,6 @@ static struct omap_hwmod omap2420_mcspi2_hwmod = { .slaves_cnt = ARRAY_SIZE(omap2420_mcspi2_slaves), .class = &omap2xxx_mcspi_class, .dev_attr = &omap_mcspi2_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), }; /* @@ -1473,7 +1460,6 @@ static struct omap_hwmod omap2420_mcbsp1_hwmod = { }, .slaves = omap2420_mcbsp1_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_mcbsp1_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), }; /* mcbsp2 */ @@ -1514,7 +1500,6 @@ static struct omap_hwmod omap2420_mcbsp2_hwmod = { }, .slaves = omap2420_mcbsp2_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_mcbsp2_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), }; static __initdata struct omap_hwmod *omap2420_hwmods[] = { diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 16743c7d6e8..a2580d01c3f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -110,7 +110,6 @@ static struct omap_hwmod omap2430_l3_main_hwmod = { .masters_cnt = ARRAY_SIZE(omap2430_l3_main_masters), .slaves = omap2430_l3_main_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_l3_main_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), .flags = HWMOD_NO_IDLEST, }; @@ -192,6 +191,7 @@ static struct omap_hwmod_addr_space omap2430_usbhsotg_addrs[] = { .pa_end = OMAP243X_HS_BASE + SZ_4K - 1, .flags = ADDR_TYPE_RT }, + { } }; /* l4_core ->usbhsotg interface */ @@ -249,7 +249,6 @@ static struct omap_hwmod omap2430_l4_core_hwmod = { .masters_cnt = ARRAY_SIZE(omap2430_l4_core_masters), .slaves = omap2430_l4_core_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_l4_core_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), .flags = HWMOD_NO_IDLEST, }; @@ -300,7 +299,6 @@ static struct omap_hwmod omap2430_l4_wkup_hwmod = { .masters_cnt = ARRAY_SIZE(omap2430_l4_wkup_masters), .slaves = omap2430_l4_wkup_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_l4_wkup_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), .flags = HWMOD_NO_IDLEST, }; @@ -316,7 +314,6 @@ static struct omap_hwmod omap2430_mpu_hwmod = { .main_clk = "mpu_ck", .masters = omap2430_mpu_masters, .masters_cnt = ARRAY_SIZE(omap2430_mpu_masters), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; /* @@ -344,7 +341,16 @@ static struct omap_hwmod omap2430_iva_hwmod = { .class = &iva_hwmod_class, .masters = omap2430_iva_masters, .masters_cnt = ARRAY_SIZE(omap2430_iva_masters), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) +}; + +/* always-on timers dev attribute */ +static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = { + .timer_capability = OMAP_TIMER_ALWON, +}; + +/* pwm timers dev attribute */ +static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = { + .timer_capability = OMAP_TIMER_HAS_PWM, }; /* timer1 */ @@ -387,10 +393,10 @@ static struct omap_hwmod omap2430_timer1_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT1_SHIFT, }, }, + .dev_attr = &capability_alwon_dev_attr, .slaves = omap2430_timer1_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_timer1_slaves), .class = &omap2xxx_timer_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) }; /* timer2 */ @@ -424,10 +430,10 @@ static struct omap_hwmod omap2430_timer2_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT2_SHIFT, }, }, + .dev_attr = &capability_alwon_dev_attr, .slaves = omap2430_timer2_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_timer2_slaves), .class = &omap2xxx_timer_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) }; /* timer3 */ @@ -461,10 +467,10 @@ static struct omap_hwmod omap2430_timer3_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT3_SHIFT, }, }, + .dev_attr = &capability_alwon_dev_attr, .slaves = omap2430_timer3_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_timer3_slaves), .class = &omap2xxx_timer_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) }; /* timer4 */ @@ -498,10 +504,10 @@ static struct omap_hwmod omap2430_timer4_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT4_SHIFT, }, }, + .dev_attr = &capability_alwon_dev_attr, .slaves = omap2430_timer4_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_timer4_slaves), .class = &omap2xxx_timer_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) }; /* timer5 */ @@ -535,10 +541,10 @@ static struct omap_hwmod omap2430_timer5_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT, }, }, + .dev_attr = &capability_alwon_dev_attr, .slaves = omap2430_timer5_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_timer5_slaves), .class = &omap2xxx_timer_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) }; /* timer6 */ @@ -572,10 +578,10 @@ static struct omap_hwmod omap2430_timer6_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT, }, }, + .dev_attr = &capability_alwon_dev_attr, .slaves = omap2430_timer6_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_timer6_slaves), .class = &omap2xxx_timer_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) }; /* timer7 */ @@ -609,10 +615,10 @@ static struct omap_hwmod omap2430_timer7_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT, }, }, + .dev_attr = &capability_alwon_dev_attr, .slaves = omap2430_timer7_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_timer7_slaves), .class = &omap2xxx_timer_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) }; /* timer8 */ @@ -646,10 +652,10 @@ static struct omap_hwmod omap2430_timer8_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT, }, }, + .dev_attr = &capability_alwon_dev_attr, .slaves = omap2430_timer8_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_timer8_slaves), .class = &omap2xxx_timer_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) }; /* timer9 */ @@ -683,10 +689,10 @@ static struct omap_hwmod omap2430_timer9_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT9_SHIFT, }, }, + .dev_attr = &capability_pwm_dev_attr, .slaves = omap2430_timer9_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_timer9_slaves), .class = &omap2xxx_timer_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) }; /* timer10 */ @@ -720,10 +726,10 @@ static struct omap_hwmod omap2430_timer10_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT10_SHIFT, }, }, + .dev_attr = &capability_pwm_dev_attr, .slaves = omap2430_timer10_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_timer10_slaves), .class = &omap2xxx_timer_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) }; /* timer11 */ @@ -757,10 +763,10 @@ static struct omap_hwmod omap2430_timer11_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT11_SHIFT, }, }, + .dev_attr = &capability_pwm_dev_attr, .slaves = omap2430_timer11_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_timer11_slaves), .class = &omap2xxx_timer_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) }; /* timer12 */ @@ -794,10 +800,10 @@ static struct omap_hwmod omap2430_timer12_hwmod = { .idlest_idle_bit = OMAP24XX_ST_GPT12_SHIFT, }, }, + .dev_attr = &capability_pwm_dev_attr, .slaves = omap2430_timer12_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_timer12_slaves), .class = &omap2xxx_timer_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) }; /* l4_wkup -> wd_timer2 */ @@ -838,7 +844,6 @@ static struct omap_hwmod omap2430_wd_timer2_hwmod = { }, .slaves = omap2430_wd_timer2_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_wd_timer2_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; /* UART1 */ @@ -864,7 +869,6 @@ static struct omap_hwmod omap2430_uart1_hwmod = { .slaves = omap2430_uart1_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_uart1_slaves), .class = &omap2_uart_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; /* UART2 */ @@ -890,7 +894,6 @@ static struct omap_hwmod omap2430_uart2_hwmod = { .slaves = omap2430_uart2_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_uart2_slaves), .class = &omap2_uart_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; /* UART3 */ @@ -916,7 +919,6 @@ static struct omap_hwmod omap2430_uart3_hwmod = { .slaves = omap2430_uart3_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_uart3_slaves), .class = &omap2_uart_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; /* dss */ @@ -964,7 +966,6 @@ static struct omap_hwmod omap2430_dss_core_hwmod = { .slaves_cnt = ARRAY_SIZE(omap2430_dss_slaves), .masters = omap2430_dss_masters, .masters_cnt = ARRAY_SIZE(omap2430_dss_masters), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), .flags = HWMOD_NO_IDLEST, }; @@ -998,7 +999,6 @@ static struct omap_hwmod omap2430_dss_dispc_hwmod = { }, .slaves = omap2430_dss_dispc_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_dss_dispc_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), .flags = HWMOD_NO_IDLEST, }; @@ -1029,7 +1029,6 @@ static struct omap_hwmod omap2430_dss_rfbi_hwmod = { }, .slaves = omap2430_dss_rfbi_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_dss_rfbi_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), .flags = HWMOD_NO_IDLEST, }; @@ -1061,7 +1060,6 @@ static struct omap_hwmod omap2430_dss_venc_hwmod = { }, .slaves = omap2430_dss_venc_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_dss_venc_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), .flags = HWMOD_NO_IDLEST, }; @@ -1122,7 +1120,6 @@ static struct omap_hwmod omap2430_i2c1_hwmod = { .slaves_cnt = ARRAY_SIZE(omap2430_i2c1_slaves), .class = &i2c_class, .dev_attr = &i2c_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; /* I2C2 */ @@ -1150,7 +1147,6 @@ static struct omap_hwmod omap2430_i2c2_hwmod = { .slaves_cnt = ARRAY_SIZE(omap2430_i2c2_slaves), .class = &i2c_class, .dev_attr = &i2c_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; /* l4_wkup -> gpio1 */ @@ -1272,7 +1268,6 @@ static struct omap_hwmod omap2430_gpio1_hwmod = { .slaves_cnt = ARRAY_SIZE(omap2430_gpio1_slaves), .class = &omap2xxx_gpio_hwmod_class, .dev_attr = &gpio_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; /* gpio2 */ @@ -1298,7 +1293,6 @@ static struct omap_hwmod omap2430_gpio2_hwmod = { .slaves_cnt = ARRAY_SIZE(omap2430_gpio2_slaves), .class = &omap2xxx_gpio_hwmod_class, .dev_attr = &gpio_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; /* gpio3 */ @@ -1324,7 +1318,6 @@ static struct omap_hwmod omap2430_gpio3_hwmod = { .slaves_cnt = ARRAY_SIZE(omap2430_gpio3_slaves), .class = &omap2xxx_gpio_hwmod_class, .dev_attr = &gpio_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; /* gpio4 */ @@ -1350,7 +1343,6 @@ static struct omap_hwmod omap2430_gpio4_hwmod = { .slaves_cnt = ARRAY_SIZE(omap2430_gpio4_slaves), .class = &omap2xxx_gpio_hwmod_class, .dev_attr = &gpio_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; /* gpio5 */ @@ -1381,7 +1373,6 @@ static struct omap_hwmod omap2430_gpio5_hwmod = { .slaves_cnt = ARRAY_SIZE(omap2430_gpio5_slaves), .class = &omap2xxx_gpio_hwmod_class, .dev_attr = &gpio_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; /* dma attributes */ @@ -1428,7 +1419,6 @@ static struct omap_hwmod omap2430_dma_system_hwmod = { .masters = omap2430_dma_system_masters, .masters_cnt = ARRAY_SIZE(omap2430_dma_system_masters), .dev_attr = &dma_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), .flags = HWMOD_NO_IDLEST, }; @@ -1468,7 +1458,6 @@ static struct omap_hwmod omap2430_mailbox_hwmod = { }, .slaves = omap2430_mailbox_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_mailbox_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; /* mcspi1 */ @@ -1498,7 +1487,6 @@ static struct omap_hwmod omap2430_mcspi1_hwmod = { .slaves_cnt = ARRAY_SIZE(omap2430_mcspi1_slaves), .class = &omap2xxx_mcspi_class, .dev_attr = &omap_mcspi1_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; /* mcspi2 */ @@ -1528,7 +1516,6 @@ static struct omap_hwmod omap2430_mcspi2_hwmod = { .slaves_cnt = ARRAY_SIZE(omap2430_mcspi2_slaves), .class = &omap2xxx_mcspi_class, .dev_attr = &omap_mcspi2_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; /* mcspi3 */ @@ -1571,7 +1558,6 @@ static struct omap_hwmod omap2430_mcspi3_hwmod = { .slaves_cnt = ARRAY_SIZE(omap2430_mcspi3_slaves), .class = &omap2xxx_mcspi_class, .dev_attr = &omap_mcspi3_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; /* @@ -1627,7 +1613,6 @@ static struct omap_hwmod omap2430_usbhsotg_hwmod = { */ .flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) }; /* @@ -1688,7 +1673,6 @@ static struct omap_hwmod omap2430_mcbsp1_hwmod = { }, .slaves = omap2430_mcbsp1_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_mcbsp1_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; /* mcbsp2 */ @@ -1730,7 +1714,6 @@ static struct omap_hwmod omap2430_mcbsp2_hwmod = { }, .slaves = omap2430_mcbsp2_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_mcbsp2_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; /* mcbsp3 */ @@ -1782,7 +1765,6 @@ static struct omap_hwmod omap2430_mcbsp3_hwmod = { }, .slaves = omap2430_mcbsp3_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_mcbsp3_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; /* mcbsp4 */ @@ -1840,7 +1822,6 @@ static struct omap_hwmod omap2430_mcbsp4_hwmod = { }, .slaves = omap2430_mcbsp4_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_mcbsp4_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; /* mcbsp5 */ @@ -1898,7 +1879,6 @@ static struct omap_hwmod omap2430_mcbsp5_hwmod = { }, .slaves = omap2430_mcbsp5_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_mcbsp5_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; /* MMC/SD/SDIO common */ @@ -1965,7 +1945,6 @@ static struct omap_hwmod omap2430_mmc1_hwmod = { .slaves = omap2430_mmc1_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_mmc1_slaves), .class = &omap2430_mmc_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; /* MMC/SD/SDIO2 */ @@ -2009,7 +1988,6 @@ static struct omap_hwmod omap2430_mmc2_hwmod = { .slaves = omap2430_mmc2_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_mmc2_slaves), .class = &omap2430_mmc_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; static __initdata struct omap_hwmod *omap2430_hwmods[] = { diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 25bf43b5a4e..3008e1672c7 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -156,7 +156,6 @@ static struct omap_hwmod omap3xxx_l3_main_hwmod = { .masters_cnt = ARRAY_SIZE(omap3xxx_l3_main_masters), .slaves = omap3xxx_l3_main_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_l3_main_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), .flags = HWMOD_NO_IDLEST, }; @@ -459,7 +458,6 @@ static struct omap_hwmod omap3xxx_l4_core_hwmod = { .class = &l4_hwmod_class, .slaves = omap3xxx_l4_core_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_l4_core_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), .flags = HWMOD_NO_IDLEST, }; @@ -474,7 +472,6 @@ static struct omap_hwmod omap3xxx_l4_per_hwmod = { .class = &l4_hwmod_class, .slaves = omap3xxx_l4_per_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_l4_per_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), .flags = HWMOD_NO_IDLEST, }; @@ -489,7 +486,6 @@ static struct omap_hwmod omap3xxx_l4_wkup_hwmod = { .class = &l4_hwmod_class, .slaves = omap3xxx_l4_wkup_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_l4_wkup_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), .flags = HWMOD_NO_IDLEST, }; @@ -505,7 +501,6 @@ static struct omap_hwmod omap3xxx_mpu_hwmod = { .main_clk = "arm_fck", .masters = omap3xxx_mpu_masters, .masters_cnt = ARRAY_SIZE(omap3xxx_mpu_masters), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; /* @@ -533,7 +528,6 @@ static struct omap_hwmod omap3xxx_iva_hwmod = { .class = &iva_hwmod_class, .masters = omap3xxx_iva_masters, .masters_cnt = ARRAY_SIZE(omap3xxx_iva_masters), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) }; /* timer class */ @@ -570,6 +564,21 @@ static struct omap_hwmod_class omap3xxx_timer_hwmod_class = { .rev = OMAP_TIMER_IP_VERSION_1, }; +/* secure timers dev attribute */ +static struct omap_timer_capability_dev_attr capability_secure_dev_attr = { + .timer_capability = OMAP_TIMER_SECURE, +}; + +/* always-on timers dev attribute */ +static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = { + .timer_capability = OMAP_TIMER_ALWON, +}; + +/* pwm timers dev attribute */ +static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = { + .timer_capability = OMAP_TIMER_HAS_PWM, +}; + /* timer1 */ static struct omap_hwmod omap3xxx_timer1_hwmod; @@ -610,10 +619,10 @@ static struct omap_hwmod omap3xxx_timer1_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPT1_SHIFT, }, }, + .dev_attr = &capability_alwon_dev_attr, .slaves = omap3xxx_timer1_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_timer1_slaves), .class = &omap3xxx_timer_1ms_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) }; /* timer2 */ @@ -656,10 +665,10 @@ static struct omap_hwmod omap3xxx_timer2_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPT2_SHIFT, }, }, + .dev_attr = &capability_alwon_dev_attr, .slaves = omap3xxx_timer2_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_timer2_slaves), .class = &omap3xxx_timer_1ms_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) }; /* timer3 */ @@ -702,10 +711,10 @@ static struct omap_hwmod omap3xxx_timer3_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPT3_SHIFT, }, }, + .dev_attr = &capability_alwon_dev_attr, .slaves = omap3xxx_timer3_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_timer3_slaves), .class = &omap3xxx_timer_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) }; /* timer4 */ @@ -748,10 +757,10 @@ static struct omap_hwmod omap3xxx_timer4_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPT4_SHIFT, }, }, + .dev_attr = &capability_alwon_dev_attr, .slaves = omap3xxx_timer4_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_timer4_slaves), .class = &omap3xxx_timer_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) }; /* timer5 */ @@ -794,10 +803,10 @@ static struct omap_hwmod omap3xxx_timer5_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPT5_SHIFT, }, }, + .dev_attr = &capability_alwon_dev_attr, .slaves = omap3xxx_timer5_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_timer5_slaves), .class = &omap3xxx_timer_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) }; /* timer6 */ @@ -840,10 +849,10 @@ static struct omap_hwmod omap3xxx_timer6_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPT6_SHIFT, }, }, + .dev_attr = &capability_alwon_dev_attr, .slaves = omap3xxx_timer6_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_timer6_slaves), .class = &omap3xxx_timer_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) }; /* timer7 */ @@ -886,10 +895,10 @@ static struct omap_hwmod omap3xxx_timer7_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPT7_SHIFT, }, }, + .dev_attr = &capability_alwon_dev_attr, .slaves = omap3xxx_timer7_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_timer7_slaves), .class = &omap3xxx_timer_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) }; /* timer8 */ @@ -932,10 +941,10 @@ static struct omap_hwmod omap3xxx_timer8_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPT8_SHIFT, }, }, + .dev_attr = &capability_pwm_dev_attr, .slaves = omap3xxx_timer8_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_timer8_slaves), .class = &omap3xxx_timer_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) }; /* timer9 */ @@ -978,10 +987,10 @@ static struct omap_hwmod omap3xxx_timer9_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPT9_SHIFT, }, }, + .dev_attr = &capability_pwm_dev_attr, .slaves = omap3xxx_timer9_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_timer9_slaves), .class = &omap3xxx_timer_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) }; /* timer10 */ @@ -1015,10 +1024,10 @@ static struct omap_hwmod omap3xxx_timer10_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPT10_SHIFT, }, }, + .dev_attr = &capability_pwm_dev_attr, .slaves = omap3xxx_timer10_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_timer10_slaves), .class = &omap3xxx_timer_1ms_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) }; /* timer11 */ @@ -1052,10 +1061,10 @@ static struct omap_hwmod omap3xxx_timer11_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPT11_SHIFT, }, }, + .dev_attr = &capability_pwm_dev_attr, .slaves = omap3xxx_timer11_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_timer11_slaves), .class = &omap3xxx_timer_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) }; /* timer12*/ @@ -1102,10 +1111,10 @@ static struct omap_hwmod omap3xxx_timer12_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPT12_SHIFT, }, }, + .dev_attr = &capability_secure_dev_attr, .slaves = omap3xxx_timer12_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_timer12_slaves), .class = &omap3xxx_timer_hwmod_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) }; /* l4_wkup -> wd_timer2 */ @@ -1182,7 +1191,6 @@ static struct omap_hwmod omap3xxx_wd_timer2_hwmod = { }, .slaves = omap3xxx_wd_timer2_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_wd_timer2_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), /* * XXX: Use software supervised mode, HW supervised smartidle seems to * block CORE power domain idle transitions. Maybe a HW bug in wdt2? @@ -1213,7 +1221,6 @@ static struct omap_hwmod omap3xxx_uart1_hwmod = { .slaves = omap3xxx_uart1_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_uart1_slaves), .class = &omap2_uart_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; /* UART2 */ @@ -1239,7 +1246,6 @@ static struct omap_hwmod omap3xxx_uart2_hwmod = { .slaves = omap3xxx_uart2_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_uart2_slaves), .class = &omap2_uart_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; /* UART3 */ @@ -1265,7 +1271,6 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = { .slaves = omap3xxx_uart3_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_uart3_slaves), .class = &omap2_uart_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; /* UART4 */ @@ -1302,7 +1307,6 @@ static struct omap_hwmod omap3xxx_uart4_hwmod = { .slaves = omap3xxx_uart4_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_uart4_slaves), .class = &omap2_uart_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3630ES1), }; static struct omap_hwmod_class i2c_class = { @@ -1390,7 +1394,6 @@ static struct omap_hwmod omap3430es1_dss_core_hwmod = { .slaves_cnt = ARRAY_SIZE(omap3430es1_dss_slaves), .masters = omap3xxx_dss_masters, .masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1), .flags = HWMOD_NO_IDLEST, }; @@ -1415,8 +1418,6 @@ static struct omap_hwmod omap3xxx_dss_core_hwmod = { .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_slaves), .masters = omap3xxx_dss_masters, .masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters), - .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2 | - CHIP_IS_OMAP3630ES1 | CHIP_GE_OMAP3630ES1_1), }; /* l4_core -> dss_dispc */ @@ -1454,9 +1455,6 @@ static struct omap_hwmod omap3xxx_dss_dispc_hwmod = { }, .slaves = omap3xxx_dss_dispc_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dispc_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 | - CHIP_GE_OMAP3430ES2 | CHIP_IS_OMAP3630ES1 | - CHIP_GE_OMAP3630ES1_1), .flags = HWMOD_NO_IDLEST, }; @@ -1518,9 +1516,6 @@ static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = { }, .slaves = omap3xxx_dss_dsi1_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dsi1_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 | - CHIP_GE_OMAP3430ES2 | CHIP_IS_OMAP3630ES1 | - CHIP_GE_OMAP3630ES1_1), .flags = HWMOD_NO_IDLEST, }; @@ -1558,9 +1553,6 @@ static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = { }, .slaves = omap3xxx_dss_rfbi_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_rfbi_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 | - CHIP_GE_OMAP3430ES2 | CHIP_IS_OMAP3630ES1 | - CHIP_GE_OMAP3630ES1_1), .flags = HWMOD_NO_IDLEST, }; @@ -1599,9 +1591,6 @@ static struct omap_hwmod omap3xxx_dss_venc_hwmod = { }, .slaves = omap3xxx_dss_venc_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_venc_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 | - CHIP_GE_OMAP3430ES2 | CHIP_IS_OMAP3630ES1 | - CHIP_GE_OMAP3630ES1_1), .flags = HWMOD_NO_IDLEST, }; @@ -1637,7 +1626,6 @@ static struct omap_hwmod omap3xxx_i2c1_hwmod = { .slaves_cnt = ARRAY_SIZE(omap3xxx_i2c1_slaves), .class = &i2c_class, .dev_attr = &i2c1_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; /* I2C2 */ @@ -1672,7 +1660,6 @@ static struct omap_hwmod omap3xxx_i2c2_hwmod = { .slaves_cnt = ARRAY_SIZE(omap3xxx_i2c2_slaves), .class = &i2c_class, .dev_attr = &i2c2_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; /* I2C3 */ @@ -1718,7 +1705,6 @@ static struct omap_hwmod omap3xxx_i2c3_hwmod = { .slaves_cnt = ARRAY_SIZE(omap3xxx_i2c3_slaves), .class = &i2c_class, .dev_attr = &i2c3_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; /* l4_wkup -> gpio1 */ @@ -1880,7 +1866,6 @@ static struct omap_hwmod omap3xxx_gpio1_hwmod = { .slaves_cnt = ARRAY_SIZE(omap3xxx_gpio1_slaves), .class = &omap3xxx_gpio_hwmod_class, .dev_attr = &gpio_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; /* gpio2 */ @@ -1912,7 +1897,6 @@ static struct omap_hwmod omap3xxx_gpio2_hwmod = { .slaves_cnt = ARRAY_SIZE(omap3xxx_gpio2_slaves), .class = &omap3xxx_gpio_hwmod_class, .dev_attr = &gpio_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; /* gpio3 */ @@ -1944,7 +1928,6 @@ static struct omap_hwmod omap3xxx_gpio3_hwmod = { .slaves_cnt = ARRAY_SIZE(omap3xxx_gpio3_slaves), .class = &omap3xxx_gpio_hwmod_class, .dev_attr = &gpio_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; /* gpio4 */ @@ -1976,7 +1959,6 @@ static struct omap_hwmod omap3xxx_gpio4_hwmod = { .slaves_cnt = ARRAY_SIZE(omap3xxx_gpio4_slaves), .class = &omap3xxx_gpio_hwmod_class, .dev_attr = &gpio_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; /* gpio5 */ @@ -2013,7 +1995,6 @@ static struct omap_hwmod omap3xxx_gpio5_hwmod = { .slaves_cnt = ARRAY_SIZE(omap3xxx_gpio5_slaves), .class = &omap3xxx_gpio_hwmod_class, .dev_attr = &gpio_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; /* gpio6 */ @@ -2050,7 +2031,6 @@ static struct omap_hwmod omap3xxx_gpio6_hwmod = { .slaves_cnt = ARRAY_SIZE(omap3xxx_gpio6_slaves), .class = &omap3xxx_gpio_hwmod_class, .dev_attr = &gpio_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; /* dma_system -> L3 */ @@ -2134,7 +2114,6 @@ static struct omap_hwmod omap3xxx_dma_system_hwmod = { .masters = omap3xxx_dma_system_masters, .masters_cnt = ARRAY_SIZE(omap3xxx_dma_system_masters), .dev_attr = &dma_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), .flags = HWMOD_NO_IDLEST, }; @@ -2207,7 +2186,6 @@ static struct omap_hwmod omap3xxx_mcbsp1_hwmod = { }, .slaves = omap3xxx_mcbsp1_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp1_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; /* mcbsp2 */ @@ -2264,7 +2242,6 @@ static struct omap_hwmod omap3xxx_mcbsp2_hwmod = { .slaves = omap3xxx_mcbsp2_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp2_slaves), .dev_attr = &omap34xx_mcbsp2_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; /* mcbsp3 */ @@ -2321,7 +2298,6 @@ static struct omap_hwmod omap3xxx_mcbsp3_hwmod = { .slaves = omap3xxx_mcbsp3_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp3_slaves), .dev_attr = &omap34xx_mcbsp3_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; /* mcbsp4 */ @@ -2379,7 +2355,6 @@ static struct omap_hwmod omap3xxx_mcbsp4_hwmod = { }, .slaves = omap3xxx_mcbsp4_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp4_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; /* mcbsp5 */ @@ -2437,7 +2412,6 @@ static struct omap_hwmod omap3xxx_mcbsp5_hwmod = { }, .slaves = omap3xxx_mcbsp5_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp5_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; /* 'mcbsp sidetone' class */ @@ -2498,7 +2472,6 @@ static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = { }, .slaves = omap3xxx_mcbsp2_sidetone_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp2_sidetone_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; /* mcbsp3_sidetone */ @@ -2547,7 +2520,6 @@ static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = { }, .slaves = omap3xxx_mcbsp3_sidetone_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp3_sidetone_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; @@ -2597,7 +2569,7 @@ static struct omap_hwmod omap34xx_sr1_hwmod = { .name = "sr1_hwmod", .class = &omap34xx_smartreflex_hwmod_class, .main_clk = "sr1_fck", - .vdd_name = "mpu", + .vdd_name = "mpu_iva", .prcm = { .omap2 = { .prcm_reg_id = 1, @@ -2609,9 +2581,6 @@ static struct omap_hwmod omap34xx_sr1_hwmod = { }, .slaves = omap3_sr1_slaves, .slaves_cnt = ARRAY_SIZE(omap3_sr1_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2 | - CHIP_IS_OMAP3430ES3_0 | - CHIP_IS_OMAP3430ES3_1), .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; @@ -2619,7 +2588,7 @@ static struct omap_hwmod omap36xx_sr1_hwmod = { .name = "sr1_hwmod", .class = &omap36xx_smartreflex_hwmod_class, .main_clk = "sr1_fck", - .vdd_name = "mpu", + .vdd_name = "mpu_iva", .prcm = { .omap2 = { .prcm_reg_id = 1, @@ -2631,7 +2600,6 @@ static struct omap_hwmod omap36xx_sr1_hwmod = { }, .slaves = omap3_sr1_slaves, .slaves_cnt = ARRAY_SIZE(omap3_sr1_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3630ES1), }; /* SR2 */ @@ -2655,9 +2623,6 @@ static struct omap_hwmod omap34xx_sr2_hwmod = { }, .slaves = omap3_sr2_slaves, .slaves_cnt = ARRAY_SIZE(omap3_sr2_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2 | - CHIP_IS_OMAP3430ES3_0 | - CHIP_IS_OMAP3430ES3_1), .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; @@ -2677,7 +2642,6 @@ static struct omap_hwmod omap36xx_sr2_hwmod = { }, .slaves = omap3_sr2_slaves, .slaves_cnt = ARRAY_SIZE(omap3_sr2_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3630ES1), }; /* @@ -2745,7 +2709,6 @@ static struct omap_hwmod omap3xxx_mailbox_hwmod = { }, .slaves = omap3xxx_mailbox_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_mailbox_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; /* l4 core -> mcspi1 interface */ @@ -2843,7 +2806,6 @@ static struct omap_hwmod omap34xx_mcspi1 = { .slaves_cnt = ARRAY_SIZE(omap34xx_mcspi1_slaves), .class = &omap34xx_mcspi_class, .dev_attr = &omap_mcspi1_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; /* mcspi2 */ @@ -2873,7 +2835,6 @@ static struct omap_hwmod omap34xx_mcspi2 = { .slaves_cnt = ARRAY_SIZE(omap34xx_mcspi2_slaves), .class = &omap34xx_mcspi_class, .dev_attr = &omap_mcspi2_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; /* mcspi3 */ @@ -2916,7 +2877,6 @@ static struct omap_hwmod omap34xx_mcspi3 = { .slaves_cnt = ARRAY_SIZE(omap34xx_mcspi3_slaves), .class = &omap34xx_mcspi_class, .dev_attr = &omap_mcspi3_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; /* SPI4 */ @@ -2957,7 +2917,6 @@ static struct omap_hwmod omap34xx_mcspi4 = { .slaves_cnt = ARRAY_SIZE(omap34xx_mcspi4_slaves), .class = &omap34xx_mcspi_class, .dev_attr = &omap_mcspi4_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; /* @@ -3014,7 +2973,6 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = { */ .flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) }; /* usb_otg_hs */ @@ -3042,7 +3000,6 @@ static struct omap_hwmod am35xx_usbhsotg_hwmod = { .slaves = am35xx_usbhsotg_slaves, .slaves_cnt = ARRAY_SIZE(am35xx_usbhsotg_slaves), .class = &am35xx_usbotg_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES3_1) }; /* MMC/SD/SDIO common */ @@ -3108,7 +3065,6 @@ static struct omap_hwmod omap3xxx_mmc1_hwmod = { .slaves = omap3xxx_mmc1_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_mmc1_slaves), .class = &omap34xx_mmc_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; /* MMC/SD/SDIO2 */ @@ -3151,7 +3107,6 @@ static struct omap_hwmod omap3xxx_mmc2_hwmod = { .slaves = omap3xxx_mmc2_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_mmc2_slaves), .class = &omap34xx_mmc_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; /* MMC/SD/SDIO3 */ @@ -3193,7 +3148,6 @@ static struct omap_hwmod omap3xxx_mmc3_hwmod = { .slaves = omap3xxx_mmc3_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_mmc3_slaves), .class = &omap34xx_mmc_class, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { @@ -3224,10 +3178,7 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_uart1_hwmod, &omap3xxx_uart2_hwmod, &omap3xxx_uart3_hwmod, - &omap3xxx_uart4_hwmod, /* dss class */ - &omap3430es1_dss_core_hwmod, - &omap3xxx_dss_core_hwmod, &omap3xxx_dss_dispc_hwmod, &omap3xxx_dss_dsi1_hwmod, &omap3xxx_dss_rfbi_hwmod, @@ -3239,9 +3190,6 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_i2c3_hwmod, &omap34xx_sr1_hwmod, &omap34xx_sr2_hwmod, - &omap36xx_sr1_hwmod, - &omap36xx_sr2_hwmod, - /* gpio class */ &omap3xxx_gpio1_hwmod, @@ -3272,16 +3220,96 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap34xx_mcspi3, &omap34xx_mcspi4, - /* usbotg class */ + NULL, +}; + +/* 3430ES1-only hwmods */ +static __initdata struct omap_hwmod *omap3430es1_hwmods[] = { + &omap3430es1_dss_core_hwmod, + NULL +}; + +/* 3430ES2+-only hwmods */ +static __initdata struct omap_hwmod *omap3430es2plus_hwmods[] = { + &omap3xxx_dss_core_hwmod, &omap3xxx_usbhsotg_hwmod, + NULL +}; - /* usbotg for am35x */ - &am35xx_usbhsotg_hwmod, +/* 34xx-only hwmods (all ES revisions) */ +static __initdata struct omap_hwmod *omap34xx_hwmods[] = { + &omap34xx_sr1_hwmod, + &omap34xx_sr2_hwmod, + NULL +}; - NULL, +/* 36xx-only hwmods (all ES revisions) */ +static __initdata struct omap_hwmod *omap36xx_hwmods[] = { + &omap3xxx_uart4_hwmod, + &omap3xxx_dss_core_hwmod, + &omap36xx_sr1_hwmod, + &omap36xx_sr2_hwmod, + &omap3xxx_usbhsotg_hwmod, + NULL +}; + +static __initdata struct omap_hwmod *am35xx_hwmods[] = { + &omap3xxx_dss_core_hwmod, /* XXX ??? */ + &am35xx_usbhsotg_hwmod, + NULL }; int __init omap3xxx_hwmod_init(void) { - return omap_hwmod_register(omap3xxx_hwmods); + int r; + struct omap_hwmod **h = NULL; + unsigned int rev; + + /* Register hwmods common to all OMAP3 */ + r = omap_hwmod_register(omap3xxx_hwmods); + if (!r) + return r; + + rev = omap_rev(); + + /* + * Register hwmods common to individual OMAP3 families, all + * silicon revisions (e.g., 34xx, or AM3505/3517, or 36xx) + * All possible revisions should be included in this conditional. + */ + if (rev == OMAP3430_REV_ES1_0 || rev == OMAP3430_REV_ES2_0 || + rev == OMAP3430_REV_ES2_1 || rev == OMAP3430_REV_ES3_0 || + rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2) { + h = omap34xx_hwmods; + } else if (rev == OMAP3517_REV_ES1_0 || rev == OMAP3517_REV_ES1_1) { + h = am35xx_hwmods; + } else if (rev == OMAP3630_REV_ES1_0 || rev == OMAP3630_REV_ES1_1 || + rev == OMAP3630_REV_ES1_2) { + h = omap36xx_hwmods; + } else { + WARN(1, "OMAP3 hwmod family init: unknown chip type\n"); + return -EINVAL; + }; + + r = omap_hwmod_register(h); + if (!r) + return r; + + /* + * Register hwmods specific to certain ES levels of a + * particular family of silicon (e.g., 34xx ES1.0) + */ + h = NULL; + if (rev == OMAP3430_REV_ES1_0) { + h = omap3430es1_hwmods; + } else if (rev == OMAP3430_REV_ES2_0 || rev == OMAP3430_REV_ES2_1 || + rev == OMAP3430_REV_ES3_0 || rev == OMAP3430_REV_ES3_1 || + rev == OMAP3430_REV_ES3_1_2) { + h = omap3430es2plus_hwmods; + }; + + if (h) + r = omap_hwmod_register(h); + + return r; } diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 6201422c060..393afac9caf 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -29,6 +29,7 @@ #include <plat/mcbsp.h> #include <plat/mmc.h> #include <plat/i2c.h> +#include <plat/dmtimer.h> #include "omap_hwmod_common_data.h" @@ -133,7 +134,6 @@ static struct omap_hwmod omap44xx_dmm_hwmod = { .slaves = omap44xx_dmm_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_dmm_slaves), .mpu_irqs = omap44xx_dmm_irqs, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* @@ -189,7 +189,6 @@ static struct omap_hwmod omap44xx_emif_fw_hwmod = { }, .slaves = omap44xx_emif_fw_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_emif_fw_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* @@ -236,7 +235,6 @@ static struct omap_hwmod omap44xx_l3_instr_hwmod = { }, .slaves = omap44xx_l3_instr_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_l3_instr_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* l3_main_1 */ @@ -336,7 +334,6 @@ static struct omap_hwmod omap44xx_l3_main_1_hwmod = { }, .slaves = omap44xx_l3_main_1_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_1_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* l3_main_2 */ @@ -438,7 +435,6 @@ static struct omap_hwmod omap44xx_l3_main_2_hwmod = { }, .slaves = omap44xx_l3_main_2_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_2_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* l3_main_3 */ @@ -496,7 +492,6 @@ static struct omap_hwmod omap44xx_l3_main_3_hwmod = { }, .slaves = omap44xx_l3_main_3_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_3_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* @@ -559,7 +554,6 @@ static struct omap_hwmod omap44xx_l4_abe_hwmod = { }, .slaves = omap44xx_l4_abe_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_l4_abe_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* l4_cfg */ @@ -588,7 +582,6 @@ static struct omap_hwmod omap44xx_l4_cfg_hwmod = { }, .slaves = omap44xx_l4_cfg_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_l4_cfg_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* l4_per */ @@ -617,7 +610,6 @@ static struct omap_hwmod omap44xx_l4_per_hwmod = { }, .slaves = omap44xx_l4_per_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_l4_per_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* l4_wkup */ @@ -646,7 +638,6 @@ static struct omap_hwmod omap44xx_l4_wkup_hwmod = { }, .slaves = omap44xx_l4_wkup_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_l4_wkup_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* @@ -677,7 +668,6 @@ static struct omap_hwmod omap44xx_mpu_private_hwmod = { .clkdm_name = "mpuss_clkdm", .slaves = omap44xx_mpu_private_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mpu_private_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* @@ -828,7 +818,6 @@ static struct omap_hwmod omap44xx_aess_hwmod = { .slaves_cnt = ARRAY_SIZE(omap44xx_aess_slaves), .masters = omap44xx_aess_masters, .masters_cnt = ARRAY_SIZE(omap44xx_aess_masters), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* @@ -856,7 +845,6 @@ static struct omap_hwmod omap44xx_bandgap_hwmod = { }, .opt_clks = bandgap_opt_clks, .opt_clks_cnt = ARRAY_SIZE(bandgap_opt_clks), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* @@ -917,7 +905,6 @@ static struct omap_hwmod omap44xx_counter_32k_hwmod = { }, .slaves = omap44xx_counter_32k_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_counter_32k_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* @@ -1005,7 +992,6 @@ static struct omap_hwmod omap44xx_dma_system_hwmod = { .slaves_cnt = ARRAY_SIZE(omap44xx_dma_system_slaves), .masters = omap44xx_dma_system_masters, .masters_cnt = ARRAY_SIZE(omap44xx_dma_system_masters), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* @@ -1098,7 +1084,6 @@ static struct omap_hwmod omap44xx_dmic_hwmod = { }, .slaves = omap44xx_dmic_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_dmic_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* @@ -1164,7 +1149,6 @@ static struct omap_hwmod omap44xx_dsp_c0_hwmod = { .rstctrl_offs = OMAP4_RM_TESLA_RSTCTRL_OFFSET, }, }, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; static struct omap_hwmod omap44xx_dsp_hwmod = { @@ -1187,7 +1171,6 @@ static struct omap_hwmod omap44xx_dsp_hwmod = { .slaves_cnt = ARRAY_SIZE(omap44xx_dsp_slaves), .masters = omap44xx_dsp_masters, .masters_cnt = ARRAY_SIZE(omap44xx_dsp_masters), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* @@ -1278,7 +1261,6 @@ static struct omap_hwmod omap44xx_dss_hwmod = { .slaves_cnt = ARRAY_SIZE(omap44xx_dss_slaves), .masters = omap44xx_dss_masters, .masters_cnt = ARRAY_SIZE(omap44xx_dss_masters), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* @@ -1381,7 +1363,6 @@ static struct omap_hwmod omap44xx_dss_dispc_hwmod = { .opt_clks_cnt = ARRAY_SIZE(dss_dispc_opt_clks), .slaves = omap44xx_dss_dispc_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_dss_dispc_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* @@ -1480,7 +1461,6 @@ static struct omap_hwmod omap44xx_dss_dsi1_hwmod = { .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_opt_clks), .slaves = omap44xx_dss_dsi1_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_dss_dsi1_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* dss_dsi2 */ @@ -1558,7 +1538,6 @@ static struct omap_hwmod omap44xx_dss_dsi2_hwmod = { .opt_clks_cnt = ARRAY_SIZE(dss_dsi2_opt_clks), .slaves = omap44xx_dss_dsi2_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_dss_dsi2_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* @@ -1656,7 +1635,6 @@ static struct omap_hwmod omap44xx_dss_hdmi_hwmod = { .opt_clks_cnt = ARRAY_SIZE(dss_hdmi_opt_clks), .slaves = omap44xx_dss_hdmi_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_dss_hdmi_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* @@ -1748,7 +1726,6 @@ static struct omap_hwmod omap44xx_dss_rfbi_hwmod = { .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks), .slaves = omap44xx_dss_rfbi_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_dss_rfbi_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* @@ -1817,7 +1794,6 @@ static struct omap_hwmod omap44xx_dss_venc_hwmod = { }, .slaves = omap44xx_dss_venc_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_dss_venc_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* @@ -1901,7 +1877,6 @@ static struct omap_hwmod omap44xx_gpio1_hwmod = { .dev_attr = &gpio_dev_attr, .slaves = omap44xx_gpio1_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_gpio1_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* gpio2 */ @@ -1957,7 +1932,6 @@ static struct omap_hwmod omap44xx_gpio2_hwmod = { .dev_attr = &gpio_dev_attr, .slaves = omap44xx_gpio2_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_gpio2_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* gpio3 */ @@ -2013,7 +1987,6 @@ static struct omap_hwmod omap44xx_gpio3_hwmod = { .dev_attr = &gpio_dev_attr, .slaves = omap44xx_gpio3_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_gpio3_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* gpio4 */ @@ -2069,7 +2042,6 @@ static struct omap_hwmod omap44xx_gpio4_hwmod = { .dev_attr = &gpio_dev_attr, .slaves = omap44xx_gpio4_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_gpio4_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* gpio5 */ @@ -2125,7 +2097,6 @@ static struct omap_hwmod omap44xx_gpio5_hwmod = { .dev_attr = &gpio_dev_attr, .slaves = omap44xx_gpio5_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_gpio5_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* gpio6 */ @@ -2181,7 +2152,6 @@ static struct omap_hwmod omap44xx_gpio6_hwmod = { .dev_attr = &gpio_dev_attr, .slaves = omap44xx_gpio6_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_gpio6_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* @@ -2261,7 +2231,6 @@ static struct omap_hwmod omap44xx_hsi_hwmod = { .slaves_cnt = ARRAY_SIZE(omap44xx_hsi_slaves), .masters = omap44xx_hsi_masters, .masters_cnt = ARRAY_SIZE(omap44xx_hsi_masters), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* @@ -2345,7 +2314,6 @@ static struct omap_hwmod omap44xx_i2c1_hwmod = { .slaves = omap44xx_i2c1_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_i2c1_slaves), .dev_attr = &i2c_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* i2c2 */ @@ -2402,7 +2370,6 @@ static struct omap_hwmod omap44xx_i2c2_hwmod = { .slaves = omap44xx_i2c2_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_i2c2_slaves), .dev_attr = &i2c_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* i2c3 */ @@ -2459,7 +2426,6 @@ static struct omap_hwmod omap44xx_i2c3_hwmod = { .slaves = omap44xx_i2c3_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_i2c3_slaves), .dev_attr = &i2c_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* i2c4 */ @@ -2516,7 +2482,6 @@ static struct omap_hwmod omap44xx_i2c4_hwmod = { .slaves = omap44xx_i2c4_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_i2c4_slaves), .dev_attr = &i2c_dev_attr, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* @@ -2577,7 +2542,6 @@ static struct omap_hwmod omap44xx_ipu_c0_hwmod = { .rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET, }, }, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* Pseudo hwmod for reset control purpose only */ @@ -2593,7 +2557,6 @@ static struct omap_hwmod omap44xx_ipu_c1_hwmod = { .rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET, }, }, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; static struct omap_hwmod omap44xx_ipu_hwmod = { @@ -2616,7 +2579,6 @@ static struct omap_hwmod omap44xx_ipu_hwmod = { .slaves_cnt = ARRAY_SIZE(omap44xx_ipu_slaves), .masters = omap44xx_ipu_masters, .masters_cnt = ARRAY_SIZE(omap44xx_ipu_masters), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* @@ -2706,7 +2668,6 @@ static struct omap_hwmod omap44xx_iss_hwmod = { .slaves_cnt = ARRAY_SIZE(omap44xx_iss_slaves), .masters = omap44xx_iss_masters, .masters_cnt = ARRAY_SIZE(omap44xx_iss_masters), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* @@ -2781,7 +2742,6 @@ static struct omap_hwmod omap44xx_iva_seq0_hwmod = { .rstctrl_offs = OMAP4_RM_IVAHD_RSTCTRL_OFFSET, }, }, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* Pseudo hwmod for reset control purpose only */ @@ -2797,7 +2757,6 @@ static struct omap_hwmod omap44xx_iva_seq1_hwmod = { .rstctrl_offs = OMAP4_RM_IVAHD_RSTCTRL_OFFSET, }, }, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; static struct omap_hwmod omap44xx_iva_hwmod = { @@ -2820,7 +2779,6 @@ static struct omap_hwmod omap44xx_iva_hwmod = { .slaves_cnt = ARRAY_SIZE(omap44xx_iva_slaves), .masters = omap44xx_iva_masters, .masters_cnt = ARRAY_SIZE(omap44xx_iva_masters), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* @@ -2890,7 +2848,6 @@ static struct omap_hwmod omap44xx_kbd_hwmod = { }, .slaves = omap44xx_kbd_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_kbd_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* @@ -2956,7 +2913,6 @@ static struct omap_hwmod omap44xx_mailbox_hwmod = { }, .slaves = omap44xx_mailbox_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mailbox_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* @@ -3051,7 +3007,6 @@ static struct omap_hwmod omap44xx_mcbsp1_hwmod = { }, .slaves = omap44xx_mcbsp1_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp1_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* mcbsp2 */ @@ -3127,7 +3082,6 @@ static struct omap_hwmod omap44xx_mcbsp2_hwmod = { }, .slaves = omap44xx_mcbsp2_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp2_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* mcbsp3 */ @@ -3203,7 +3157,6 @@ static struct omap_hwmod omap44xx_mcbsp3_hwmod = { }, .slaves = omap44xx_mcbsp3_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp3_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* mcbsp4 */ @@ -3258,7 +3211,6 @@ static struct omap_hwmod omap44xx_mcbsp4_hwmod = { }, .slaves = omap44xx_mcbsp4_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp4_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* @@ -3353,7 +3305,6 @@ static struct omap_hwmod omap44xx_mcpdm_hwmod = { }, .slaves = omap44xx_mcpdm_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mcpdm_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* @@ -3442,7 +3393,6 @@ static struct omap_hwmod omap44xx_mcspi1_hwmod = { .dev_attr = &mcspi1_dev_attr, .slaves = omap44xx_mcspi1_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mcspi1_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* mcspi2 */ @@ -3505,7 +3455,6 @@ static struct omap_hwmod omap44xx_mcspi2_hwmod = { .dev_attr = &mcspi2_dev_attr, .slaves = omap44xx_mcspi2_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mcspi2_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* mcspi3 */ @@ -3568,7 +3517,6 @@ static struct omap_hwmod omap44xx_mcspi3_hwmod = { .dev_attr = &mcspi3_dev_attr, .slaves = omap44xx_mcspi3_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mcspi3_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* mcspi4 */ @@ -3629,7 +3577,6 @@ static struct omap_hwmod omap44xx_mcspi4_hwmod = { .dev_attr = &mcspi4_dev_attr, .slaves = omap44xx_mcspi4_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mcspi4_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* @@ -3718,7 +3665,6 @@ static struct omap_hwmod omap44xx_mmc1_hwmod = { .slaves_cnt = ARRAY_SIZE(omap44xx_mmc1_slaves), .masters = omap44xx_mmc1_masters, .masters_cnt = ARRAY_SIZE(omap44xx_mmc1_masters), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* mmc2 */ @@ -3779,7 +3725,6 @@ static struct omap_hwmod omap44xx_mmc2_hwmod = { .slaves_cnt = ARRAY_SIZE(omap44xx_mmc2_slaves), .masters = omap44xx_mmc2_masters, .masters_cnt = ARRAY_SIZE(omap44xx_mmc2_masters), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* mmc3 */ @@ -3834,7 +3779,6 @@ static struct omap_hwmod omap44xx_mmc3_hwmod = { }, .slaves = omap44xx_mmc3_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mmc3_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* mmc4 */ @@ -3890,7 +3834,6 @@ static struct omap_hwmod omap44xx_mmc4_hwmod = { }, .slaves = omap44xx_mmc4_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mmc4_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* mmc5 */ @@ -3945,7 +3888,6 @@ static struct omap_hwmod omap44xx_mmc5_hwmod = { }, .slaves = omap44xx_mmc5_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mmc5_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* @@ -3987,7 +3929,6 @@ static struct omap_hwmod omap44xx_mpu_hwmod = { }, .masters = omap44xx_mpu_masters, .masters_cnt = ARRAY_SIZE(omap44xx_mpu_masters), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* @@ -4063,7 +4004,6 @@ static struct omap_hwmod omap44xx_smartreflex_core_hwmod = { }, .slaves = omap44xx_smartreflex_core_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_smartreflex_core_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* smartreflex_iva */ @@ -4112,7 +4052,6 @@ static struct omap_hwmod omap44xx_smartreflex_iva_hwmod = { }, .slaves = omap44xx_smartreflex_iva_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_smartreflex_iva_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* smartreflex_mpu */ @@ -4161,7 +4100,6 @@ static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod = { }, .slaves = omap44xx_smartreflex_mpu_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_smartreflex_mpu_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* @@ -4224,7 +4162,6 @@ static struct omap_hwmod omap44xx_spinlock_hwmod = { }, .slaves = omap44xx_spinlock_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_spinlock_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* @@ -4265,6 +4202,16 @@ static struct omap_hwmod_class omap44xx_timer_hwmod_class = { .sysc = &omap44xx_timer_sysc, }; +/* always-on timers dev attribute */ +static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = { + .timer_capability = OMAP_TIMER_ALWON, +}; + +/* pwm timers dev attribute */ +static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = { + .timer_capability = OMAP_TIMER_HAS_PWM, +}; + /* timer1 */ static struct omap_hwmod omap44xx_timer1_hwmod; static struct omap_hwmod_irq_info omap44xx_timer1_irqs[] = { @@ -4308,9 +4255,9 @@ static struct omap_hwmod omap44xx_timer1_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, + .dev_attr = &capability_alwon_dev_attr, .slaves = omap44xx_timer1_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_timer1_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* timer2 */ @@ -4356,9 +4303,9 @@ static struct omap_hwmod omap44xx_timer2_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, + .dev_attr = &capability_alwon_dev_attr, .slaves = omap44xx_timer2_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_timer2_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* timer3 */ @@ -4404,9 +4351,9 @@ static struct omap_hwmod omap44xx_timer3_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, + .dev_attr = &capability_alwon_dev_attr, .slaves = omap44xx_timer3_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_timer3_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* timer4 */ @@ -4452,9 +4399,9 @@ static struct omap_hwmod omap44xx_timer4_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, + .dev_attr = &capability_alwon_dev_attr, .slaves = omap44xx_timer4_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_timer4_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* timer5 */ @@ -4519,9 +4466,9 @@ static struct omap_hwmod omap44xx_timer5_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, + .dev_attr = &capability_alwon_dev_attr, .slaves = omap44xx_timer5_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_timer5_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* timer6 */ @@ -4587,9 +4534,9 @@ static struct omap_hwmod omap44xx_timer6_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, + .dev_attr = &capability_alwon_dev_attr, .slaves = omap44xx_timer6_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_timer6_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* timer7 */ @@ -4654,9 +4601,9 @@ static struct omap_hwmod omap44xx_timer7_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, + .dev_attr = &capability_alwon_dev_attr, .slaves = omap44xx_timer7_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_timer7_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* timer8 */ @@ -4721,9 +4668,9 @@ static struct omap_hwmod omap44xx_timer8_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, + .dev_attr = &capability_pwm_dev_attr, .slaves = omap44xx_timer8_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_timer8_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* timer9 */ @@ -4769,9 +4716,9 @@ static struct omap_hwmod omap44xx_timer9_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, + .dev_attr = &capability_pwm_dev_attr, .slaves = omap44xx_timer9_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_timer9_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* timer10 */ @@ -4817,9 +4764,9 @@ static struct omap_hwmod omap44xx_timer10_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, + .dev_attr = &capability_pwm_dev_attr, .slaves = omap44xx_timer10_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_timer10_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* timer11 */ @@ -4865,9 +4812,9 @@ static struct omap_hwmod omap44xx_timer11_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, + .dev_attr = &capability_pwm_dev_attr, .slaves = omap44xx_timer11_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_timer11_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* @@ -4944,7 +4891,6 @@ static struct omap_hwmod omap44xx_uart1_hwmod = { }, .slaves = omap44xx_uart1_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_uart1_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* uart2 */ @@ -4999,7 +4945,6 @@ static struct omap_hwmod omap44xx_uart2_hwmod = { }, .slaves = omap44xx_uart2_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_uart2_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* uart3 */ @@ -5055,7 +5000,6 @@ static struct omap_hwmod omap44xx_uart3_hwmod = { }, .slaves = omap44xx_uart3_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_uart3_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* uart4 */ @@ -5110,7 +5054,6 @@ static struct omap_hwmod omap44xx_uart4_hwmod = { }, .slaves = omap44xx_uart4_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_uart4_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* @@ -5195,7 +5138,6 @@ static struct omap_hwmod omap44xx_usb_otg_hs_hwmod = { .slaves_cnt = ARRAY_SIZE(omap44xx_usb_otg_hs_slaves), .masters = omap44xx_usb_otg_hs_masters, .masters_cnt = ARRAY_SIZE(omap44xx_usb_otg_hs_masters), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* @@ -5266,7 +5208,6 @@ static struct omap_hwmod omap44xx_wd_timer2_hwmod = { }, .slaves = omap44xx_wd_timer2_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_wd_timer2_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; /* wd_timer3 */ @@ -5333,7 +5274,6 @@ static struct omap_hwmod omap44xx_wd_timer3_hwmod = { }, .slaves = omap44xx_wd_timer3_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_wd_timer3_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; static __initdata struct omap_hwmod *omap44xx_hwmods[] = { diff --git a/arch/arm/mach-omap2/omap_l3_noc.c b/arch/arm/mach-omap2/omap_l3_noc.c index 7b9f1909ddb..c8b1bef92e5 100644 --- a/arch/arm/mach-omap2/omap_l3_noc.c +++ b/arch/arm/mach-omap2/omap_l3_noc.c @@ -1,25 +1,25 @@ /* - * OMAP4XXX L3 Interconnect error handling driver - * - * Copyright (C) 2011 Texas Corporation - * Santosh Shilimkar <santosh.shilimkar@ti.com> - * Sricharan <r.sricharan@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ + * OMAP4XXX L3 Interconnect error handling driver + * + * Copyright (C) 2011 Texas Corporation + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * Sricharan <r.sricharan@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ #include <linux/init.h> #include <linux/io.h> #include <linux/platform_device.h> @@ -55,12 +55,12 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3) { - struct omap4_l3 *l3 = _l3; - int inttype, i, j; + struct omap4_l3 *l3 = _l3; + int inttype, i, k; int err_src = 0; - u32 std_err_main_addr, std_err_main, err_reg; - u32 base, slave_addr, clear; - char *source_name; + u32 std_err_main, err_reg, clear, masterid; + void __iomem *base, *l3_targ_base; + char *target_name, *master_name = "UN IDENTIFIED"; /* Get the Type of interrupt */ inttype = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR; @@ -70,43 +70,50 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3) * Read the regerr register of the clock domain * to determine the source */ - base = (u32)l3->l3_base[i]; - err_reg = readl(base + l3_flagmux[i] + (inttype << 3)); + base = l3->l3_base[i]; + err_reg = __raw_readl(base + l3_flagmux[i] + + + L3_FLAGMUX_REGERR0 + (inttype << 3)); /* Get the corresponding error and analyse */ if (err_reg) { /* Identify the source from control status register */ - for (j = 0; !(err_reg & (1 << j)); j++) - ; + err_src = __ffs(err_reg); - err_src = j; /* Read the stderrlog_main_source from clk domain */ - std_err_main_addr = base + *(l3_targ[i] + err_src); - std_err_main = readl(std_err_main_addr); + l3_targ_base = base + *(l3_targ[i] + err_src); + std_err_main = __raw_readl(l3_targ_base + + L3_TARG_STDERRLOG_MAIN); + masterid = __raw_readl(l3_targ_base + + L3_TARG_STDERRLOG_MSTADDR); switch (std_err_main & CUSTOM_ERROR) { case STANDARD_ERROR: - source_name = - l3_targ_stderrlog_main_name[i][err_src]; - - slave_addr = std_err_main_addr + - L3_SLAVE_ADDRESS_OFFSET; - WARN(true, "L3 standard error: SOURCE:%s at address 0x%x\n", - source_name, readl(slave_addr)); + target_name = + l3_targ_inst_name[i][err_src]; + WARN(true, "L3 standard error: TARGET:%s at address 0x%x\n", + target_name, + __raw_readl(l3_targ_base + + L3_TARG_STDERRLOG_SLVOFSLSB)); /* clear the std error log*/ clear = std_err_main | CLEAR_STDERR_LOG; - writel(clear, std_err_main_addr); + writel(clear, l3_targ_base + + L3_TARG_STDERRLOG_MAIN); break; case CUSTOM_ERROR: - source_name = - l3_targ_stderrlog_main_name[i][err_src]; - - WARN(true, "CUSTOM SRESP error with SOURCE:%s\n", - source_name); + target_name = + l3_targ_inst_name[i][err_src]; + for (k = 0; k < NUM_OF_L3_MASTERS; k++) { + if (masterid == l3_masters[k].id) + master_name = + l3_masters[k].name; + } + WARN(true, "L3 custom error: MASTER:%s TARGET:%s\n", + master_name, target_name); /* clear the std error log*/ clear = std_err_main | CLEAR_STDERR_LOG; - writel(clear, std_err_main_addr); + writel(clear, l3_targ_base + + L3_TARG_STDERRLOG_MAIN); break; default: @@ -120,12 +127,11 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3) return IRQ_HANDLED; } -static int __init omap4_l3_probe(struct platform_device *pdev) +static int __devinit omap4_l3_probe(struct platform_device *pdev) { - static struct omap4_l3 *l3; - struct resource *res; - int ret; - int irq; + static struct omap4_l3 *l3; + struct resource *res; + int ret; l3 = kzalloc(sizeof(*l3), GFP_KERNEL); if (!l3) @@ -177,27 +183,25 @@ static int __init omap4_l3_probe(struct platform_device *pdev) /* * Setup interrupt Handlers */ - irq = platform_get_irq(pdev, 0); - ret = request_irq(irq, + l3->debug_irq = platform_get_irq(pdev, 0); + ret = request_irq(l3->debug_irq, l3_interrupt_handler, IRQF_DISABLED, "l3-dbg-irq", l3); if (ret) { pr_crit("L3: request_irq failed to register for 0x%x\n", - OMAP44XX_IRQ_L3_DBG); + OMAP44XX_IRQ_L3_DBG); goto err3; } - l3->debug_irq = irq; - irq = platform_get_irq(pdev, 1); - ret = request_irq(irq, + l3->app_irq = platform_get_irq(pdev, 1); + ret = request_irq(l3->app_irq, l3_interrupt_handler, IRQF_DISABLED, "l3-app-irq", l3); if (ret) { pr_crit("L3: request_irq failed to register for 0x%x\n", - OMAP44XX_IRQ_L3_APP); + OMAP44XX_IRQ_L3_APP); goto err4; } - l3->app_irq = irq; return 0; @@ -214,9 +218,9 @@ err0: return ret; } -static int __exit omap4_l3_remove(struct platform_device *pdev) +static int __devexit omap4_l3_remove(struct platform_device *pdev) { - struct omap4_l3 *l3 = platform_get_drvdata(pdev); + struct omap4_l3 *l3 = platform_get_drvdata(pdev); free_irq(l3->app_irq, l3); free_irq(l3->debug_irq, l3); @@ -228,16 +232,29 @@ static int __exit omap4_l3_remove(struct platform_device *pdev) return 0; } +#if defined(CONFIG_OF) +static const struct of_device_id l3_noc_match[] = { + {.compatible = "ti,omap4-l3-noc", }, + {}, +} +MODULE_DEVICE_TABLE(of, l3_noc_match); +#else +#define l3_noc_match NULL +#endif + static struct platform_driver omap4_l3_driver = { - .remove = __exit_p(omap4_l3_remove), + .probe = omap4_l3_probe, + .remove = __devexit_p(omap4_l3_remove), .driver = { - .name = "omap_l3_noc", + .name = "omap_l3_noc", + .owner = THIS_MODULE, + .of_match_table = l3_noc_match, }, }; static int __init omap4_l3_init(void) { - return platform_driver_probe(&omap4_l3_driver, omap4_l3_probe); + return platform_driver_register(&omap4_l3_driver); } postcore_initcall_sync(omap4_l3_init); diff --git a/arch/arm/mach-omap2/omap_l3_noc.h b/arch/arm/mach-omap2/omap_l3_noc.h index 359b83348ae..90b50984cd2 100644 --- a/arch/arm/mach-omap2/omap_l3_noc.h +++ b/arch/arm/mach-omap2/omap_l3_noc.h @@ -1,132 +1,162 @@ - /* - * OMAP4XXX L3 Interconnect error handling driver header - * - * Copyright (C) 2011 Texas Corporation - * Santosh Shilimkar <santosh.shilimkar@ti.com> - * sricharan <r.sricharan@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ +/* + * OMAP4XXX L3 Interconnect error handling driver header + * + * Copyright (C) 2011 Texas Corporation + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * sricharan <r.sricharan@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ #ifndef __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H #define __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H -/* - * L3 register offsets - */ #define L3_MODULES 3 #define CLEAR_STDERR_LOG (1 << 31) #define CUSTOM_ERROR 0x2 #define STANDARD_ERROR 0x0 #define INBAND_ERROR 0x0 -#define EMIF_KERRLOG_OFFSET 0x10 -#define L3_SLAVE_ADDRESS_OFFSET 0x14 -#define LOGICAL_ADDR_ERRORLOG 0x4 #define L3_APPLICATION_ERROR 0x0 #define L3_DEBUG_ERROR 0x1 -u32 l3_flagmux[L3_MODULES] = { - 0x50C, - 0x100C, - 0X020C +/* L3 TARG register offsets */ +#define L3_TARG_STDERRLOG_MAIN 0x48 +#define L3_TARG_STDERRLOG_SLVOFSLSB 0x5c +#define L3_TARG_STDERRLOG_MSTADDR 0x68 +#define L3_FLAGMUX_REGERR0 0xc + +#define NUM_OF_L3_MASTERS (sizeof(l3_masters)/sizeof(l3_masters[0])) + +static u32 l3_flagmux[L3_MODULES] = { + 0x500, + 0x1000, + 0X0200 }; -/* - * L3 Target standard Error register offsets - */ -u32 l3_targ_stderrlog_main_clk1[] = { - 0x148, /* DMM1 */ - 0x248, /* DMM2 */ - 0x348, /* ABE */ - 0x448, /* L4CFG */ - 0x648 /* CLK2 PWR DISC */ +/* L3 Target standard Error register offsets */ +static u32 l3_targ_inst_clk1[] = { + 0x100, /* DMM1 */ + 0x200, /* DMM2 */ + 0x300, /* ABE */ + 0x400, /* L4CFG */ + 0x600 /* CLK2 PWR DISC */ }; -u32 l3_targ_stderrlog_main_clk2[] = { - 0x548, /* CORTEX M3 */ - 0x348, /* DSS */ - 0x148, /* GPMC */ - 0x448, /* ISS */ - 0x748, /* IVAHD */ - 0xD48, /* missing in TRM corresponds to AES1*/ - 0x948, /* L4 PER0*/ - 0x248, /* OCMRAM */ - 0x148, /* missing in TRM corresponds to GPMC sERROR*/ - 0x648, /* SGX */ - 0x848, /* SL2 */ - 0x1648, /* C2C */ - 0x1148, /* missing in TRM corresponds PWR DISC CLK1*/ - 0xF48, /* missing in TRM corrsponds to SHA1*/ - 0xE48, /* missing in TRM corresponds to AES2*/ - 0xC48, /* L4 PER3 */ - 0xA48, /* L4 PER1*/ - 0xB48 /* L4 PER2*/ +static u32 l3_targ_inst_clk2[] = { + 0x500, /* CORTEX M3 */ + 0x300, /* DSS */ + 0x100, /* GPMC */ + 0x400, /* ISS */ + 0x700, /* IVAHD */ + 0xD00, /* missing in TRM corresponds to AES1*/ + 0x900, /* L4 PER0*/ + 0x200, /* OCMRAM */ + 0x100, /* missing in TRM corresponds to GPMC sERROR*/ + 0x600, /* SGX */ + 0x800, /* SL2 */ + 0x1600, /* C2C */ + 0x1100, /* missing in TRM corresponds PWR DISC CLK1*/ + 0xF00, /* missing in TRM corrsponds to SHA1*/ + 0xE00, /* missing in TRM corresponds to AES2*/ + 0xC00, /* L4 PER3 */ + 0xA00, /* L4 PER1*/ + 0xB00 /* L4 PER2*/ }; -u32 l3_targ_stderrlog_main_clk3[] = { - 0x0148 /* EMUSS */ +static u32 l3_targ_inst_clk3[] = { + 0x0100 /* EMUSS */ }; -char *l3_targ_stderrlog_main_name[L3_MODULES][18] = { +static struct l3_masters_data { + u32 id; + char name[10]; +} l3_masters[] = { + { 0x0 , "MPU"}, + { 0x10, "CS_ADP"}, + { 0x14, "xxx"}, + { 0x20, "DSP"}, + { 0x30, "IVAHD"}, + { 0x40, "ISS"}, + { 0x44, "DucatiM3"}, + { 0x48, "FaceDetect"}, + { 0x50, "SDMA_Rd"}, + { 0x54, "SDMA_Wr"}, + { 0x58, "xxx"}, + { 0x5C, "xxx"}, + { 0x60, "SGX"}, + { 0x70, "DSS"}, + { 0x80, "C2C"}, + { 0x88, "xxx"}, + { 0x8C, "xxx"}, + { 0x90, "HSI"}, + { 0xA0, "MMC1"}, + { 0xA4, "MMC2"}, + { 0xA8, "MMC6"}, + { 0xB0, "UNIPRO1"}, + { 0xC0, "USBHOSTHS"}, + { 0xC4, "USBOTGHS"}, + { 0xC8, "USBHOSTFS"} +}; + +static char *l3_targ_inst_name[L3_MODULES][18] = { { - "DMM1", - "DMM2", - "ABE", - "L4CFG", - "CLK2 PWR DISC", + "DMM1", + "DMM2", + "ABE", + "L4CFG", + "CLK2 PWR DISC", }, { - "CORTEX M3" , - "DSS ", - "GPMC ", - "ISS ", - "IVAHD ", - "AES1", - "L4 PER0", - "OCMRAM ", - "GPMC sERROR", - "SGX ", - "SL2 ", - "C2C ", - "PWR DISC CLK1", - "SHA1", - "AES2", - "L4 PER3", - "L4 PER1", - "L4 PER2", + "CORTEX M3" , + "DSS ", + "GPMC ", + "ISS ", + "IVAHD ", + "AES1", + "L4 PER0", + "OCMRAM ", + "GPMC sERROR", + "SGX ", + "SL2 ", + "C2C ", + "PWR DISC CLK1", + "SHA1", + "AES2", + "L4 PER3", + "L4 PER1", + "L4 PER2", }, { - "EMUSS", + "EMUSS", }, }; -u32 *l3_targ[L3_MODULES] = { - l3_targ_stderrlog_main_clk1, - l3_targ_stderrlog_main_clk2, - l3_targ_stderrlog_main_clk3, +static u32 *l3_targ[L3_MODULES] = { + l3_targ_inst_clk1, + l3_targ_inst_clk2, + l3_targ_inst_clk3, }; struct omap4_l3 { - struct device *dev; - struct clk *ick; + struct device *dev; + struct clk *ick; /* memory base */ - void __iomem *l3_base[4]; + void __iomem *l3_base[L3_MODULES]; - int debug_irq; - int app_irq; + int debug_irq; + int app_irq; }; - #endif diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c index 873c0e33b51..a05a62f9ee5 100644 --- a/arch/arm/mach-omap2/omap_l3_smx.c +++ b/arch/arm/mach-omap2/omap_l3_smx.c @@ -1,26 +1,26 @@ - /* - * OMAP3XXX L3 Interconnect Driver - * - * Copyright (C) 2011 Texas Corporation - * Felipe Balbi <balbi@ti.com> - * Santosh Shilimkar <santosh.shilimkar@ti.com> - * Sricharan <r.sricharan@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ +/* + * OMAP3XXX L3 Interconnect Driver + * + * Copyright (C) 2011 Texas Corporation + * Felipe Balbi <balbi@ti.com> + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * Sricharan <r.sricharan@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ #include <linux/kernel.h> #include <linux/slab.h> @@ -135,7 +135,7 @@ static char *omap3_l3_initiator_string(u8 initid) } } -/** +/* * omap3_l3_block_irq - handles a register block's irq * @l3: struct omap3_l3 * * @base: register block base address @@ -150,30 +150,29 @@ static char *omap3_l3_initiator_string(u8 initid) static irqreturn_t omap3_l3_block_irq(struct omap3_l3 *l3, u64 error, int error_addr) { - u8 code = omap3_l3_decode_error_code(error); - u8 initid = omap3_l3_decode_initid(error); - u8 multi = error & L3_ERROR_LOG_MULTI; - u32 address = omap3_l3_decode_addr(error_addr); + u8 code = omap3_l3_decode_error_code(error); + u8 initid = omap3_l3_decode_initid(error); + u8 multi = error & L3_ERROR_LOG_MULTI; + u32 address = omap3_l3_decode_addr(error_addr); WARN(true, "%s seen by %s %s at address %x\n", - omap3_l3_code_string(code), - omap3_l3_initiator_string(initid), - multi ? "Multiple Errors" : "", - address); + omap3_l3_code_string(code), + omap3_l3_initiator_string(initid), + multi ? "Multiple Errors" : "", address); return IRQ_HANDLED; } static irqreturn_t omap3_l3_app_irq(int irq, void *_l3) { - struct omap3_l3 *l3 = _l3; - u64 status, clear; - u64 error; - u64 error_addr; - u64 err_source = 0; - void __iomem *base; - int int_type; - irqreturn_t ret = IRQ_NONE; + struct omap3_l3 *l3 = _l3; + u64 status, clear; + u64 error; + u64 error_addr; + u64 err_source = 0; + void __iomem *base; + int int_type; + irqreturn_t ret = IRQ_NONE; int_type = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR; if (!int_type) { @@ -191,14 +190,12 @@ static irqreturn_t omap3_l3_app_irq(int irq, void *_l3) } /* identify the error source */ - for (err_source = 0; !(status & (1 << err_source)); err_source++) - ; + err_source = __ffs(status); - base = l3->rt + *(omap3_l3_bases[int_type] + err_source); + base = l3->rt + omap3_l3_bases[int_type][err_source]; error = omap3_l3_readll(base, L3_ERROR_LOG); if (error) { error_addr = omap3_l3_readll(base, L3_ERROR_LOG_ADDR); - ret |= omap3_l3_block_irq(l3, error, error_addr); } @@ -215,9 +212,9 @@ static irqreturn_t omap3_l3_app_irq(int irq, void *_l3) static int __init omap3_l3_probe(struct platform_device *pdev) { - struct omap3_l3 *l3; - struct resource *res; - int ret; + struct omap3_l3 *l3; + struct resource *res; + int ret; l3 = kzalloc(sizeof(*l3), GFP_KERNEL); if (!l3) diff --git a/arch/arm/mach-omap2/omap_l3_smx.h b/arch/arm/mach-omap2/omap_l3_smx.h index ba2ed9a850c..4f3cebca417 100644 --- a/arch/arm/mach-omap2/omap_l3_smx.h +++ b/arch/arm/mach-omap2/omap_l3_smx.h @@ -1,26 +1,26 @@ - /* - * OMAP3XXX L3 Interconnect Driver header - * - * Copyright (C) 2011 Texas Corporation - * Felipe Balbi <balbi@ti.com> - * Santosh Shilimkar <santosh.shilimkar@ti.com> - * sricharan <r.sricharan@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ +/* + * OMAP3XXX L3 Interconnect Driver header + * + * Copyright (C) 2011 Texas Corporation + * Felipe Balbi <balbi@ti.com> + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * sricharan <r.sricharan@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ #ifndef __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H #define __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H @@ -40,7 +40,7 @@ #define L3_SI_CONTROL 0x020 #define L3_SI_FLAG_STATUS_0 0x510 -const u64 shift = 1; +static const u64 shift = 1; #define L3_STATUS_0_MPUIA_BRST (shift << 0) #define L3_STATUS_0_MPUIA_RSP (shift << 1) @@ -78,32 +78,32 @@ const u64 shift = 1; #define L3_STATUS_0_L4EMUTA_REQ (shift << 60) #define L3_STATUS_0_MAD2DTA_REQ (shift << 61) -#define L3_STATUS_0_TIMEOUT_MASK (L3_STATUS_0_MPUIA_BRST \ - | L3_STATUS_0_MPUIA_RSP \ - | L3_STATUS_0_IVAIA_BRST \ - | L3_STATUS_0_IVAIA_RSP \ - | L3_STATUS_0_SGXIA_BRST \ - | L3_STATUS_0_SGXIA_RSP \ - | L3_STATUS_0_CAMIA_BRST \ - | L3_STATUS_0_CAMIA_RSP \ - | L3_STATUS_0_DISPIA_BRST \ - | L3_STATUS_0_DISPIA_RSP \ - | L3_STATUS_0_DMARDIA_BRST \ - | L3_STATUS_0_DMARDIA_RSP \ - | L3_STATUS_0_DMAWRIA_BRST \ - | L3_STATUS_0_DMAWRIA_RSP \ - | L3_STATUS_0_USBOTGIA_BRST \ - | L3_STATUS_0_USBOTGIA_RSP \ - | L3_STATUS_0_USBHOSTIA_BRST \ - | L3_STATUS_0_SMSTA_REQ \ - | L3_STATUS_0_GPMCTA_REQ \ - | L3_STATUS_0_OCMRAMTA_REQ \ - | L3_STATUS_0_OCMROMTA_REQ \ - | L3_STATUS_0_IVATA_REQ \ - | L3_STATUS_0_SGXTA_REQ \ - | L3_STATUS_0_L4CORETA_REQ \ - | L3_STATUS_0_L4PERTA_REQ \ - | L3_STATUS_0_L4EMUTA_REQ \ +#define L3_STATUS_0_TIMEOUT_MASK (L3_STATUS_0_MPUIA_BRST \ + | L3_STATUS_0_MPUIA_RSP \ + | L3_STATUS_0_IVAIA_BRST \ + | L3_STATUS_0_IVAIA_RSP \ + | L3_STATUS_0_SGXIA_BRST \ + | L3_STATUS_0_SGXIA_RSP \ + | L3_STATUS_0_CAMIA_BRST \ + | L3_STATUS_0_CAMIA_RSP \ + | L3_STATUS_0_DISPIA_BRST \ + | L3_STATUS_0_DISPIA_RSP \ + | L3_STATUS_0_DMARDIA_BRST \ + | L3_STATUS_0_DMARDIA_RSP \ + | L3_STATUS_0_DMAWRIA_BRST \ + | L3_STATUS_0_DMAWRIA_RSP \ + | L3_STATUS_0_USBOTGIA_BRST \ + | L3_STATUS_0_USBOTGIA_RSP \ + | L3_STATUS_0_USBHOSTIA_BRST \ + | L3_STATUS_0_SMSTA_REQ \ + | L3_STATUS_0_GPMCTA_REQ \ + | L3_STATUS_0_OCMRAMTA_REQ \ + | L3_STATUS_0_OCMROMTA_REQ \ + | L3_STATUS_0_IVATA_REQ \ + | L3_STATUS_0_SGXTA_REQ \ + | L3_STATUS_0_L4CORETA_REQ \ + | L3_STATUS_0_L4PERTA_REQ \ + | L3_STATUS_0_L4EMUTA_REQ \ | L3_STATUS_0_MAD2DTA_REQ) #define L3_SI_FLAG_STATUS_1 0x530 @@ -137,19 +137,19 @@ const u64 shift = 1; enum omap3_l3_initiator_id { /* LCD has 1 ID */ - OMAP_L3_LCD = 29, + OMAP_L3_LCD = 29, /* SAD2D has 1 ID */ - OMAP_L3_SAD2D = 28, + OMAP_L3_SAD2D = 28, /* MPU has 5 IDs */ - OMAP_L3_IA_MPU_SS_1 = 27, - OMAP_L3_IA_MPU_SS_2 = 26, - OMAP_L3_IA_MPU_SS_3 = 25, - OMAP_L3_IA_MPU_SS_4 = 24, - OMAP_L3_IA_MPU_SS_5 = 23, + OMAP_L3_IA_MPU_SS_1 = 27, + OMAP_L3_IA_MPU_SS_2 = 26, + OMAP_L3_IA_MPU_SS_3 = 25, + OMAP_L3_IA_MPU_SS_4 = 24, + OMAP_L3_IA_MPU_SS_5 = 23, /* IVA2.2 SS has 3 IDs*/ - OMAP_L3_IA_IVA_SS_1 = 22, - OMAP_L3_IA_IVA_SS_2 = 21, - OMAP_L3_IA_IVA_SS_3 = 20, + OMAP_L3_IA_IVA_SS_1 = 22, + OMAP_L3_IA_IVA_SS_2 = 21, + OMAP_L3_IA_IVA_SS_3 = 20, /* IVA 2.2 SS DMA has 6 IDS */ OMAP_L3_IA_IVA_SS_DMA_1 = 19, OMAP_L3_IA_IVA_SS_DMA_2 = 18, @@ -158,25 +158,25 @@ enum omap3_l3_initiator_id { OMAP_L3_IA_IVA_SS_DMA_5 = 15, OMAP_L3_IA_IVA_SS_DMA_6 = 14, /* SGX has 1 ID */ - OMAP_L3_IA_SGX = 13, + OMAP_L3_IA_SGX = 13, /* CAM has 3 ID */ - OMAP_L3_IA_CAM_1 = 12, - OMAP_L3_IA_CAM_2 = 11, - OMAP_L3_IA_CAM_3 = 10, + OMAP_L3_IA_CAM_1 = 12, + OMAP_L3_IA_CAM_2 = 11, + OMAP_L3_IA_CAM_3 = 10, /* DAP has 1 ID */ - OMAP_L3_IA_DAP = 9, + OMAP_L3_IA_DAP = 9, /* SDMA WR has 2 IDs */ - OMAP_L3_SDMA_WR_1 = 8, - OMAP_L3_SDMA_WR_2 = 7, + OMAP_L3_SDMA_WR_1 = 8, + OMAP_L3_SDMA_WR_2 = 7, /* SDMA RD has 4 IDs */ - OMAP_L3_SDMA_RD_1 = 6, - OMAP_L3_SDMA_RD_2 = 5, - OMAP_L3_SDMA_RD_3 = 4, - OMAP_L3_SDMA_RD_4 = 3, + OMAP_L3_SDMA_RD_1 = 6, + OMAP_L3_SDMA_RD_2 = 5, + OMAP_L3_SDMA_RD_3 = 4, + OMAP_L3_SDMA_RD_4 = 3, /* HSUSB OTG has 1 ID */ - OMAP_L3_USBOTG = 2, + OMAP_L3_USBOTG = 2, /* HSUSB HOST has 1 ID */ - OMAP_L3_USBHOST = 1, + OMAP_L3_USBHOST = 1, }; enum omap3_l3_code { @@ -192,21 +192,21 @@ enum omap3_l3_code { }; struct omap3_l3 { - struct device *dev; - struct clk *ick; + struct device *dev; + struct clk *ick; /* memory base*/ - void __iomem *rt; + void __iomem *rt; - int debug_irq; - int app_irq; + int debug_irq; + int app_irq; /* true when and inband functional error occurs */ - unsigned inband:1; + unsigned inband:1; }; /* offsets for l3 agents in order with the Flag status register */ -unsigned int __iomem omap3_l3_app_bases[] = { +static unsigned int omap3_l3_app_bases[] = { /* MPU IA */ 0x1400, 0x1400, @@ -305,7 +305,7 @@ unsigned int __iomem omap3_l3_app_bases[] = { 0, }; -unsigned int __iomem omap3_l3_debug_bases[] = { +static unsigned int omap3_l3_debug_bases[] = { /* MPU DATA IA */ 0x1400, /* RESERVED */ @@ -321,7 +321,7 @@ unsigned int __iomem omap3_l3_debug_bases[] = { /* REST RESERVED */ }; -u32 *omap3_l3_bases[] = { +static u32 *omap3_l3_bases[] = { omap3_l3_app_bases, omap3_l3_debug_bases, }; diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index 07d6140baa9..f515a1a056d 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -42,8 +42,11 @@ #define OMAP4_SRI2C_SLAVE_ADDR 0x12 #define OMAP4_VDD_MPU_SR_VOLT_REG 0x55 +#define OMAP4_VDD_MPU_SR_CMD_REG 0x56 #define OMAP4_VDD_IVA_SR_VOLT_REG 0x5B +#define OMAP4_VDD_IVA_SR_CMD_REG 0x5C #define OMAP4_VDD_CORE_SR_VOLT_REG 0x61 +#define OMAP4_VDD_CORE_SR_CMD_REG 0x62 #define OMAP4_VP_CONFIG_ERROROFFSET 0x00 #define OMAP4_VP_VSTEPMIN_VSTEPMIN 0x01 @@ -95,6 +98,8 @@ static unsigned long twl6030_vsel_to_uv(const u8 vsel) is_offset_valid = true; } + if (!vsel) + return 0; /* * There is no specific formula for voltage to vsel * conversion above 1.3V. There are special hardcoded @@ -106,9 +111,9 @@ static unsigned long twl6030_vsel_to_uv(const u8 vsel) return 1350000; if (smps_offset & 0x8) - return ((((vsel - 1) * 125) + 7000)) * 100; + return ((((vsel - 1) * 1266) + 70900)) * 10; else - return ((((vsel - 1) * 125) + 6000)) * 100; + return ((((vsel - 1) * 1266) + 60770)) * 10; } static u8 twl6030_uv_to_vsel(unsigned long uv) @@ -127,6 +132,8 @@ static u8 twl6030_uv_to_vsel(unsigned long uv) is_offset_valid = true; } + if (!uv) + return 0x00; /* * There is no specific formula for voltage to vsel * conversion above 1.3V. There are special hardcoded @@ -134,16 +141,21 @@ static u8 twl6030_uv_to_vsel(unsigned long uv) * hardcoding only for 1.35 V which is used for 1GH OPP for * OMAP4430. */ - if (uv == 1350000) + if (uv > twl6030_vsel_to_uv(0x39)) { + if (uv == 1350000) + return 0x3A; + pr_err("%s:OUT OF RANGE! non mapped vsel for %ld Vs max %ld\n", + __func__, uv, twl6030_vsel_to_uv(0x39)); return 0x3A; + } if (smps_offset & 0x8) - return DIV_ROUND_UP(uv - 700000, 12500) + 1; + return DIV_ROUND_UP(uv - 709000, 12660) + 1; else - return DIV_ROUND_UP(uv - 600000, 12500) + 1; + return DIV_ROUND_UP(uv - 607700, 12660) + 1; } -static struct omap_volt_pmic_info omap3_mpu_volt_info = { +static struct omap_voltdm_pmic omap3_mpu_pmic = { .slew_rate = 4000, .step_size = 12500, .on_volt = 1200000, @@ -158,12 +170,13 @@ static struct omap_volt_pmic_info omap3_mpu_volt_info = { .vp_vddmax = OMAP3430_VP1_VLIMITTO_VDDMAX, .vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR, - .pmic_reg = OMAP3_VDD_MPU_SR_CONTROL_REG, + .volt_reg_addr = OMAP3_VDD_MPU_SR_CONTROL_REG, + .i2c_high_speed = true, .vsel_to_uv = twl4030_vsel_to_uv, .uv_to_vsel = twl4030_uv_to_vsel, }; -static struct omap_volt_pmic_info omap3_core_volt_info = { +static struct omap_voltdm_pmic omap3_core_pmic = { .slew_rate = 4000, .step_size = 12500, .on_volt = 1200000, @@ -178,18 +191,19 @@ static struct omap_volt_pmic_info omap3_core_volt_info = { .vp_vddmax = OMAP3430_VP2_VLIMITTO_VDDMAX, .vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR, - .pmic_reg = OMAP3_VDD_CORE_SR_CONTROL_REG, + .volt_reg_addr = OMAP3_VDD_CORE_SR_CONTROL_REG, + .i2c_high_speed = true, .vsel_to_uv = twl4030_vsel_to_uv, .uv_to_vsel = twl4030_uv_to_vsel, }; -static struct omap_volt_pmic_info omap4_mpu_volt_info = { +static struct omap_voltdm_pmic omap4_mpu_pmic = { .slew_rate = 4000, - .step_size = 12500, - .on_volt = 1350000, - .onlp_volt = 1350000, - .ret_volt = 837500, - .off_volt = 600000, + .step_size = 12660, + .on_volt = 1375000, + .onlp_volt = 1375000, + .ret_volt = 830000, + .off_volt = 0, .volt_setup_time = 0, .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, @@ -198,18 +212,20 @@ static struct omap_volt_pmic_info omap4_mpu_volt_info = { .vp_vddmax = OMAP4_VP_MPU_VLIMITTO_VDDMAX, .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR, - .pmic_reg = OMAP4_VDD_MPU_SR_VOLT_REG, + .volt_reg_addr = OMAP4_VDD_MPU_SR_VOLT_REG, + .cmd_reg_addr = OMAP4_VDD_MPU_SR_CMD_REG, + .i2c_high_speed = true, .vsel_to_uv = twl6030_vsel_to_uv, .uv_to_vsel = twl6030_uv_to_vsel, }; -static struct omap_volt_pmic_info omap4_iva_volt_info = { +static struct omap_voltdm_pmic omap4_iva_pmic = { .slew_rate = 4000, - .step_size = 12500, - .on_volt = 1100000, - .onlp_volt = 1100000, - .ret_volt = 837500, - .off_volt = 600000, + .step_size = 12660, + .on_volt = 1188000, + .onlp_volt = 1188000, + .ret_volt = 830000, + .off_volt = 0, .volt_setup_time = 0, .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, @@ -218,18 +234,20 @@ static struct omap_volt_pmic_info omap4_iva_volt_info = { .vp_vddmax = OMAP4_VP_IVA_VLIMITTO_VDDMAX, .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR, - .pmic_reg = OMAP4_VDD_IVA_SR_VOLT_REG, + .volt_reg_addr = OMAP4_VDD_IVA_SR_VOLT_REG, + .cmd_reg_addr = OMAP4_VDD_IVA_SR_CMD_REG, + .i2c_high_speed = true, .vsel_to_uv = twl6030_vsel_to_uv, .uv_to_vsel = twl6030_uv_to_vsel, }; -static struct omap_volt_pmic_info omap4_core_volt_info = { +static struct omap_voltdm_pmic omap4_core_pmic = { .slew_rate = 4000, - .step_size = 12500, - .on_volt = 1100000, - .onlp_volt = 1100000, - .ret_volt = 837500, - .off_volt = 600000, + .step_size = 12660, + .on_volt = 1200000, + .onlp_volt = 1200000, + .ret_volt = 830000, + .off_volt = 0, .volt_setup_time = 0, .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, @@ -238,7 +256,8 @@ static struct omap_volt_pmic_info omap4_core_volt_info = { .vp_vddmax = OMAP4_VP_CORE_VLIMITTO_VDDMAX, .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR, - .pmic_reg = OMAP4_VDD_CORE_SR_VOLT_REG, + .volt_reg_addr = OMAP4_VDD_CORE_SR_VOLT_REG, + .cmd_reg_addr = OMAP4_VDD_CORE_SR_CMD_REG, .vsel_to_uv = twl6030_vsel_to_uv, .uv_to_vsel = twl6030_uv_to_vsel, }; @@ -250,14 +269,14 @@ int __init omap4_twl_init(void) if (!cpu_is_omap44xx()) return -ENODEV; - voltdm = omap_voltage_domain_lookup("mpu"); - omap_voltage_register_pmic(voltdm, &omap4_mpu_volt_info); + voltdm = voltdm_lookup("mpu"); + omap_voltage_register_pmic(voltdm, &omap4_mpu_pmic); - voltdm = omap_voltage_domain_lookup("iva"); - omap_voltage_register_pmic(voltdm, &omap4_iva_volt_info); + voltdm = voltdm_lookup("iva"); + omap_voltage_register_pmic(voltdm, &omap4_iva_pmic); - voltdm = omap_voltage_domain_lookup("core"); - omap_voltage_register_pmic(voltdm, &omap4_core_volt_info); + voltdm = voltdm_lookup("core"); + omap_voltage_register_pmic(voltdm, &omap4_core_pmic); return 0; } @@ -270,10 +289,10 @@ int __init omap3_twl_init(void) return -ENODEV; if (cpu_is_omap3630()) { - omap3_mpu_volt_info.vp_vddmin = OMAP3630_VP1_VLIMITTO_VDDMIN; - omap3_mpu_volt_info.vp_vddmax = OMAP3630_VP1_VLIMITTO_VDDMAX; - omap3_core_volt_info.vp_vddmin = OMAP3630_VP2_VLIMITTO_VDDMIN; - omap3_core_volt_info.vp_vddmax = OMAP3630_VP2_VLIMITTO_VDDMAX; + omap3_mpu_pmic.vp_vddmin = OMAP3630_VP1_VLIMITTO_VDDMIN; + omap3_mpu_pmic.vp_vddmax = OMAP3630_VP1_VLIMITTO_VDDMAX; + omap3_core_pmic.vp_vddmin = OMAP3630_VP2_VLIMITTO_VDDMIN; + omap3_core_pmic.vp_vddmax = OMAP3630_VP2_VLIMITTO_VDDMAX; } /* @@ -288,11 +307,11 @@ int __init omap3_twl_init(void) if (!twl_sr_enable_autoinit) omap3_twl_set_sr_bit(true); - voltdm = omap_voltage_domain_lookup("mpu"); - omap_voltage_register_pmic(voltdm, &omap3_mpu_volt_info); + voltdm = voltdm_lookup("mpu_iva"); + omap_voltage_register_pmic(voltdm, &omap3_mpu_pmic); - voltdm = omap_voltage_domain_lookup("core"); - omap_voltage_register_pmic(voltdm, &omap3_core_volt_info); + voltdm = voltdm_lookup("core"); + omap_voltage_register_pmic(voltdm, &omap3_core_pmic); return 0; } diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c index ab8b35b780b..9262a6b4770 100644 --- a/arch/arm/mach-omap2/opp.c +++ b/arch/arm/mach-omap2/opp.c @@ -69,7 +69,7 @@ int __init omap_init_opp_table(struct omap_opp_def *opp_def, opp_def->hwmod_name, i); return -EINVAL; } - dev = &oh->od->pdev.dev; + dev = &oh->od->pdev->dev; r = opp_add(dev, opp_def->freq, opp_def->u_volt); if (r) { diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 3feb35911a3..2ab7a9e17fe 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -26,54 +26,21 @@ static struct omap_device_pm_latency *pm_lats; -static struct device *mpu_dev; -static struct device *iva_dev; -static struct device *l3_dev; -static struct device *dsp_dev; - -struct device *omap2_get_mpuss_device(void) -{ - WARN_ON_ONCE(!mpu_dev); - return mpu_dev; -} - -struct device *omap2_get_iva_device(void) -{ - WARN_ON_ONCE(!iva_dev); - return iva_dev; -} - -struct device *omap2_get_l3_device(void) -{ - WARN_ON_ONCE(!l3_dev); - return l3_dev; -} - -struct device *omap4_get_dsp_device(void) -{ - WARN_ON_ONCE(!dsp_dev); - return dsp_dev; -} -EXPORT_SYMBOL(omap4_get_dsp_device); - -/* static int _init_omap_device(struct omap_hwmod *oh, void *user) */ -static int _init_omap_device(char *name, struct device **new_dev) +static int _init_omap_device(char *name) { struct omap_hwmod *oh; - struct omap_device *od; + struct platform_device *pdev; oh = omap_hwmod_lookup(name); if (WARN(!oh, "%s: could not find omap_hwmod for %s\n", __func__, name)) return -ENODEV; - od = omap_device_build(oh->name, 0, oh, NULL, 0, pm_lats, 0, false); - if (WARN(IS_ERR(od), "%s: could not build omap_device for %s\n", + pdev = omap_device_build(oh->name, 0, oh, NULL, 0, pm_lats, 0, false); + if (WARN(IS_ERR(pdev), "%s: could not build omap_device for %s\n", __func__, name)) return -ENODEV; - *new_dev = &od->pdev.dev; - return 0; } @@ -82,16 +49,16 @@ static int _init_omap_device(char *name, struct device **new_dev) */ static void omap2_init_processor_devices(void) { - _init_omap_device("mpu", &mpu_dev); + _init_omap_device("mpu"); if (omap3_has_iva()) - _init_omap_device("iva", &iva_dev); + _init_omap_device("iva"); if (cpu_is_omap44xx()) { - _init_omap_device("l3_main_1", &l3_dev); - _init_omap_device("dsp", &dsp_dev); - _init_omap_device("iva", &iva_dev); + _init_omap_device("l3_main_1"); + _init_omap_device("dsp"); + _init_omap_device("iva"); } else { - _init_omap_device("l3_main", &l3_dev); + _init_omap_device("l3_main"); } } @@ -130,15 +97,14 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state) } else { hwsup = clkdm_in_hwsup(pwrdm->pwrdm_clkdms[0]); clkdm_wakeup(pwrdm->pwrdm_clkdms[0]); - pwrdm_wait_transition(pwrdm); sleep_switch = FORCEWAKEUP_SWITCH; } } ret = pwrdm_set_next_pwrst(pwrdm, state); if (ret) { - printk(KERN_ERR "Unable to set state of powerdomain: %s\n", - pwrdm->name); + pr_err("%s: unable to set state of powerdomain: %s\n", + __func__, pwrdm->name); goto err; } @@ -156,44 +122,50 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state) return ret; } - pwrdm_wait_transition(pwrdm); pwrdm_state_switch(pwrdm); err: return ret; } /* - * This API is to be called during init to put the various voltage + * This API is to be called during init to set the various voltage * domains to the voltage as per the opp table. Typically we boot up * at the nominal voltage. So this function finds out the rate of * the clock associated with the voltage domain, finds out the correct - * opp entry and puts the voltage domain to the voltage specifies + * opp entry and sets the voltage domain to the voltage specified * in the opp entry */ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, - struct device *dev) + const char *oh_name) { struct voltagedomain *voltdm; struct clk *clk; struct opp *opp; unsigned long freq, bootup_volt; + struct device *dev; + + if (!vdd_name || !clk_name || !oh_name) { + pr_err("%s: invalid parameters\n", __func__); + goto exit; + } - if (!vdd_name || !clk_name || !dev) { - printk(KERN_ERR "%s: Invalid parameters!\n", __func__); + dev = omap_device_get_by_hwmod_name(oh_name); + if (IS_ERR(dev)) { + pr_err("%s: Unable to get dev pointer for hwmod %s\n", + __func__, oh_name); goto exit; } - voltdm = omap_voltage_domain_lookup(vdd_name); + voltdm = voltdm_lookup(vdd_name); if (IS_ERR(voltdm)) { - printk(KERN_ERR "%s: Unable to get vdd pointer for vdd_%s\n", + pr_err("%s: unable to get vdd pointer for vdd_%s\n", __func__, vdd_name); goto exit; } clk = clk_get(NULL, clk_name); if (IS_ERR(clk)) { - printk(KERN_ERR "%s: unable to get clk %s\n", - __func__, clk_name); + pr_err("%s: unable to get clk %s\n", __func__, clk_name); goto exit; } @@ -202,24 +174,23 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, opp = opp_find_freq_ceil(dev, &freq); if (IS_ERR(opp)) { - printk(KERN_ERR "%s: unable to find boot up OPP for vdd_%s\n", + pr_err("%s: unable to find boot up OPP for vdd_%s\n", __func__, vdd_name); goto exit; } bootup_volt = opp_get_voltage(opp); if (!bootup_volt) { - printk(KERN_ERR "%s: unable to find voltage corresponding" + pr_err("%s: unable to find voltage corresponding " "to the bootup OPP for vdd_%s\n", __func__, vdd_name); goto exit; } - omap_voltage_scale_vdd(voltdm, bootup_volt); + voltdm_scale(voltdm, bootup_volt); return 0; exit: - printk(KERN_ERR "%s: Unable to put vdd_%s to its init voltage\n\n", - __func__, vdd_name); + pr_err("%s: unable to set vdd_%s\n", __func__, vdd_name); return -EINVAL; } @@ -228,8 +199,8 @@ static void __init omap3_init_voltages(void) if (!cpu_is_omap34xx()) return; - omap2_set_init_voltage("mpu", "dpll1_ck", mpu_dev); - omap2_set_init_voltage("core", "l3_ick", l3_dev); + omap2_set_init_voltage("mpu_iva", "dpll1_ck", "mpu"); + omap2_set_init_voltage("core", "l3_ick", "l3_main"); } static void __init omap4_init_voltages(void) @@ -237,14 +208,15 @@ static void __init omap4_init_voltages(void) if (!cpu_is_omap44xx()) return; - omap2_set_init_voltage("mpu", "dpll_mpu_ck", mpu_dev); - omap2_set_init_voltage("core", "l3_div_ck", l3_dev); - omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", iva_dev); + omap2_set_init_voltage("mpu", "dpll_mpu_ck", "mpu"); + omap2_set_init_voltage("core", "l3_div_ck", "l3_main_1"); + omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva"); } static int __init omap2_common_pm_init(void) { - omap2_init_processor_devices(); + if (!of_have_populated_dt()) + omap2_init_processor_devices(); omap_pm_if_init(); return 0; diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index bf089e743ed..cf0c216132a 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -53,8 +53,6 @@ #include "powerdomain.h" #include "clockdomain.h" -static int omap2_pm_debug; - #ifdef CONFIG_SUSPEND static suspend_state_t suspend_state = PM_SUSPEND_ON; static inline bool is_suspending(void) @@ -96,7 +94,6 @@ static int omap2_fclks_active(void) static void omap2_enter_full_retention(void) { u32 l; - struct timespec ts_preidle, ts_postidle, ts_idle; /* There is 1 reference hold for all children of the oscillator * clock, the following will remove it. If no one else uses the @@ -124,10 +121,6 @@ static void omap2_enter_full_retention(void) omap2_gpio_prepare_for_idle(0); - if (omap2_pm_debug) { - getnstimeofday(&ts_preidle); - } - /* One last check for pending IRQs to avoid extra latency due * to sleeping unnecessarily. */ if (omap_irq_pending()) @@ -155,13 +148,6 @@ static void omap2_enter_full_retention(void) console_unlock(); no_sleep: - if (omap2_pm_debug) { - unsigned long long tmp; - - getnstimeofday(&ts_postidle); - ts_idle = timespec_sub(ts_postidle, ts_preidle); - tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC; - } omap2_gpio_resume_after_idle(); clk_enable(osc_ck); @@ -219,7 +205,6 @@ static int omap2_allow_mpu_retention(void) static void omap2_enter_mpu_retention(void) { int only_idle = 0; - struct timespec ts_preidle, ts_postidle, ts_idle; /* Putting MPU into the WFI state while a transfer is active * seems to cause the I2C block to timeout. Why? Good question. */ @@ -246,19 +231,7 @@ static void omap2_enter_mpu_retention(void) only_idle = 1; } - if (omap2_pm_debug) { - getnstimeofday(&ts_preidle); - } - omap2_sram_idle(); - - if (omap2_pm_debug) { - unsigned long long tmp; - - getnstimeofday(&ts_postidle); - ts_idle = timespec_sub(ts_postidle, ts_preidle); - tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC; - } } static int omap2_can_sleep(void) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 7255d9bce86..c8cbd00a41a 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -55,7 +55,7 @@ static suspend_state_t suspend_state = PM_SUSPEND_ON; static inline bool is_suspending(void) { - return (suspend_state != PM_SUSPEND_ON); + return (suspend_state != PM_SUSPEND_ON) && console_suspend_enabled; } #else static inline bool is_suspending(void) diff --git a/arch/arm/mach-omap2/powerdomain-common.c b/arch/arm/mach-omap2/powerdomain-common.c index 171fccd208c..f97afff68d6 100644 --- a/arch/arm/mach-omap2/powerdomain-common.c +++ b/arch/arm/mach-omap2/powerdomain-common.c @@ -1,9 +1,8 @@ /* - * linux/arch/arm/mach-omap2/powerdomain-common.c - * Contains common powerdomain framework functions + * Common powerdomain framework functions * - * Copyright (C) 2010 Texas Instruments, Inc. - * Copyright (C) 2010 Nokia Corporation + * Copyright (C) 2010-2011 Texas Instruments, Inc. + * Copyright (C) 2010 Nokia Corporation * * Derived from mach-omap2/powerdomain.c written by Paul Walmsley * diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 9af08473bf1..5164d587ef5 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -1,7 +1,7 @@ /* * OMAP powerdomain control * - * Copyright (C) 2007-2008 Texas Instruments, Inc. + * Copyright (C) 2007-2008, 2011 Texas Instruments, Inc. * Copyright (C) 2007-2011 Nokia Corporation * * Written by Paul Walmsley @@ -77,13 +77,11 @@ static struct powerdomain *_pwrdm_lookup(const char *name) static int _pwrdm_register(struct powerdomain *pwrdm) { int i; + struct voltagedomain *voltdm; if (!pwrdm || !pwrdm->name) return -EINVAL; - if (!omap_chip_is(pwrdm->omap_chip)) - return -EINVAL; - if (cpu_is_omap44xx() && pwrdm->prcm_partition == OMAP4430_INVALID_PRCM_PARTITION) { pr_err("powerdomain: %s: missing OMAP4 PRCM partition ID\n", @@ -94,6 +92,16 @@ static int _pwrdm_register(struct powerdomain *pwrdm) if (_pwrdm_lookup(pwrdm->name)) return -EEXIST; + voltdm = voltdm_lookup(pwrdm->voltdm.name); + if (!voltdm) { + pr_err("powerdomain: %s: voltagedomain %s does not exist\n", + pwrdm->name, pwrdm->voltdm.name); + return -EINVAL; + } + pwrdm->voltdm.ptr = voltdm; + INIT_LIST_HEAD(&pwrdm->voltdm_node); + voltdm_add_pwrdm(voltdm, pwrdm); + list_add(&pwrdm->node, &pwrdm_list); /* Initialize the powerdomain's state counter */ @@ -194,29 +202,76 @@ static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused) /* Public functions */ /** - * pwrdm_init - set up the powerdomain layer - * @pwrdm_list: array of struct powerdomain pointers to register - * @custom_funcs: func pointers for arch specific implementations + * pwrdm_register_platform_funcs - register powerdomain implementation fns + * @po: func pointers for arch specific implementations + * + * Register the list of function pointers used to implement the + * powerdomain functions on different OMAP SoCs. Should be called + * before any other pwrdm_register*() function. Returns -EINVAL if + * @po is null, -EEXIST if platform functions have already been + * registered, or 0 upon success. + */ +int pwrdm_register_platform_funcs(struct pwrdm_ops *po) +{ + if (!po) + return -EINVAL; + + if (arch_pwrdm) + return -EEXIST; + + arch_pwrdm = po; + + return 0; +} + +/** + * pwrdm_register_pwrdms - register SoC powerdomains + * @ps: pointer to an array of struct powerdomain to register * - * Loop through the array of powerdomains @pwrdm_list, registering all - * that are available on the current CPU. If pwrdm_list is supplied - * and not null, all of the referenced powerdomains will be - * registered. No return value. XXX pwrdm_list is not really a - * "list"; it is an array. Rename appropriately. + * Register the powerdomains available on a particular OMAP SoC. Must + * be called after pwrdm_register_platform_funcs(). May be called + * multiple times. Returns -EACCES if called before + * pwrdm_register_platform_funcs(); -EINVAL if the argument @ps is + * null; or 0 upon success. */ -void pwrdm_init(struct powerdomain **pwrdm_list, struct pwrdm_ops *custom_funcs) +int pwrdm_register_pwrdms(struct powerdomain **ps) { struct powerdomain **p = NULL; - if (!custom_funcs) - WARN(1, "powerdomain: No custom pwrdm functions registered\n"); - else - arch_pwrdm = custom_funcs; + if (!arch_pwrdm) + return -EEXIST; - if (pwrdm_list) { - for (p = pwrdm_list; *p; p++) - _pwrdm_register(*p); - } + if (!ps) + return -EINVAL; + + for (p = ps; *p; p++) + _pwrdm_register(*p); + + return 0; +} + +/** + * pwrdm_complete_init - set up the powerdomain layer + * + * Do whatever is necessary to initialize registered powerdomains and + * powerdomain code. Currently, this programs the next power state + * for each powerdomain to ON. This prevents powerdomains from + * unexpectedly losing context or entering high wakeup latency modes + * with non-power-management-enabled kernels. Must be called after + * pwrdm_register_pwrdms(). Returns -EACCES if called before + * pwrdm_register_pwrdms(), or 0 upon success. + */ +int pwrdm_complete_init(void) +{ + struct powerdomain *temp_p; + + if (list_empty(&pwrdm_list)) + return -EACCES; + + list_for_each_entry(temp_p, &pwrdm_list, node) + pwrdm_set_next_pwrst(temp_p, PWRDM_POWER_ON); + + return 0; } /** @@ -383,6 +438,18 @@ int pwrdm_for_each_clkdm(struct powerdomain *pwrdm, } /** + * pwrdm_get_voltdm - return a ptr to the voltdm that this pwrdm resides in + * @pwrdm: struct powerdomain * + * + * Return a pointer to the struct voltageomain that the specified powerdomain + * @pwrdm exists in. + */ +struct voltagedomain *pwrdm_get_voltdm(struct powerdomain *pwrdm) +{ + return pwrdm->voltdm.ptr; +} + +/** * pwrdm_get_mem_bank_count - get number of memory banks in this powerdomain * @pwrdm: struct powerdomain * * diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h index d23d979b9c3..42e6dd8f2a7 100644 --- a/arch/arm/mach-omap2/powerdomain.h +++ b/arch/arm/mach-omap2/powerdomain.h @@ -24,6 +24,8 @@ #include <plat/cpu.h> +#include "voltage.h" + /* Powerdomain basic power states */ #define PWRDM_POWER_OFF 0x0 #define PWRDM_POWER_RET 0x1 @@ -78,7 +80,7 @@ struct powerdomain; /** * struct powerdomain - OMAP powerdomain * @name: Powerdomain name - * @omap_chip: represents the OMAP chip types containing this pwrdm + * @voltdm: voltagedomain containing this powerdomain * @prcm_offs: the address offset from CM_BASE/PRM_BASE * @prcm_partition: (OMAP4 only) the PRCM partition ID containing @prcm_offs * @pwrsts: Possible powerdomain power states @@ -89,6 +91,7 @@ struct powerdomain; * @pwrsts_mem_on: Possible memory bank pwrstates when pwrdm in ON * @pwrdm_clkdms: Clockdomains in this powerdomain * @node: list_head linking all powerdomains + * @voltdm_node: list_head linking all powerdomains in a voltagedomain * @state: * @state_counter: * @timer: @@ -98,7 +101,10 @@ struct powerdomain; */ struct powerdomain { const char *name; - const struct omap_chip_id omap_chip; + union { + const char *name; + struct voltagedomain *ptr; + } voltdm; const s16 prcm_offs; const u8 pwrsts; const u8 pwrsts_logic_ret; @@ -109,6 +115,7 @@ struct powerdomain { const u8 prcm_partition; struct clockdomain *pwrdm_clkdms[PWRDM_MAX_CLKDMS]; struct list_head node; + struct list_head voltdm_node; int state; unsigned state_counter[PWRDM_MAX_PWRSTS]; unsigned ret_logic_off_counter; @@ -162,7 +169,9 @@ struct pwrdm_ops { int (*pwrdm_wait_transition)(struct powerdomain *pwrdm); }; -void pwrdm_init(struct powerdomain **pwrdm_list, struct pwrdm_ops *custom_funcs); +int pwrdm_register_platform_funcs(struct pwrdm_ops *custom_funcs); +int pwrdm_register_pwrdms(struct powerdomain **pwrdm_list); +int pwrdm_complete_init(void); struct powerdomain *pwrdm_lookup(const char *name); @@ -176,6 +185,7 @@ int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm); int pwrdm_for_each_clkdm(struct powerdomain *pwrdm, int (*fn)(struct powerdomain *pwrdm, struct clockdomain *clkdm)); +struct voltagedomain *pwrdm_get_voltdm(struct powerdomain *pwrdm); int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm); @@ -210,7 +220,8 @@ int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm); u32 pwrdm_get_context_loss_count(struct powerdomain *pwrdm); bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm); -extern void omap2xxx_powerdomains_init(void); +extern void omap242x_powerdomains_init(void); +extern void omap243x_powerdomains_init(void); extern void omap3xxx_powerdomains_init(void); extern void omap44xx_powerdomains_init(void); diff --git a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c index cf600e22bf8..6a17e4ca1d7 100644 --- a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c +++ b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c @@ -1,7 +1,7 @@ /* * OMAP2 and OMAP3 powerdomain control * - * Copyright (C) 2009-2010 Texas Instruments, Inc. + * Copyright (C) 2009-2011 Texas Instruments, Inc. * Copyright (C) 2007-2009 Nokia Corporation * * Derived from mach-omap2/powerdomain.c written by Paul Walmsley diff --git a/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c index 4210c339976..d3a5399091a 100644 --- a/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c @@ -1,7 +1,7 @@ /* * OMAP2/3 common powerdomain definitions * - * Copyright (C) 2007-2008 Texas Instruments, Inc. + * Copyright (C) 2007-2008, 2011 Texas Instruments, Inc. * Copyright (C) 2007-2011 Nokia Corporation * * Paul Walmsley, Jouni Högander @@ -12,20 +12,6 @@ */ /* - * To Do List - * -> Move the Sleep/Wakeup dependencies from Power Domain framework to - * Clock Domain Framework - */ - -/* - * This file contains all of the powerdomains that have some element - * of software control for the OMAP24xx and OMAP34xx chips. - * - * This is not an exhaustive listing of powerdomains on the chips; only - * powerdomains that can be controlled in software. - */ - -/* * The names for the DSP/IVA2 powerdomains are confusing. * * Most OMAP chips have an on-board DSP. @@ -59,8 +45,6 @@ struct powerdomain gfx_omap2_pwrdm = { .name = "gfx_pwrdm", .prcm_offs = GFX_MOD, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | - CHIP_IS_OMAP3430ES1), .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRSTS_RET, .banks = 1, @@ -70,11 +54,12 @@ struct powerdomain gfx_omap2_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, /* MEMONSTATE */ }, + .voltdm = { .name = "core" }, }; struct powerdomain wkup_omap2_pwrdm = { .name = "wkup_pwrdm", .prcm_offs = WKUP_MOD, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430), .pwrsts = PWRSTS_ON, + .voltdm = { .name = "wakeup" }, }; diff --git a/arch/arm/mach-omap2/powerdomains2xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_data.c index cc389fb2005..2385c1f009e 100644 --- a/arch/arm/mach-omap2/powerdomains2xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains2xxx_data.c @@ -1,7 +1,7 @@ /* * OMAP2XXX powerdomain definitions * - * Copyright (C) 2007-2008 Texas Instruments, Inc. + * Copyright (C) 2007-2008, 2011 Texas Instruments, Inc. * Copyright (C) 2007-2011 Nokia Corporation * * Paul Walmsley, Jouni Högander @@ -28,7 +28,6 @@ static struct powerdomain dsp_pwrdm = { .name = "dsp_pwrdm", .prcm_offs = OMAP24XX_DSP_MOD, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX), .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRSTS_RET, .banks = 1, @@ -38,12 +37,12 @@ static struct powerdomain dsp_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, }, + .voltdm = { .name = "core" }, }; static struct powerdomain mpu_24xx_pwrdm = { .name = "mpu_pwrdm", .prcm_offs = MPU_MOD, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX), .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRSTS_OFF_RET, .banks = 1, @@ -53,12 +52,12 @@ static struct powerdomain mpu_24xx_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, }, + .voltdm = { .name = "core" }, }; static struct powerdomain core_24xx_pwrdm = { .name = "core_pwrdm", .prcm_offs = CORE_MOD, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX), .pwrsts = PWRSTS_OFF_RET_ON, .banks = 3, .pwrsts_mem_ret = { @@ -71,6 +70,7 @@ static struct powerdomain core_24xx_pwrdm = { [1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */ [2] = PWRSTS_OFF_RET_ON, /* MEM3ONSTATE */ }, + .voltdm = { .name = "core" }, }; @@ -78,14 +78,11 @@ static struct powerdomain core_24xx_pwrdm = { * 2430-specific powerdomains */ -#ifdef CONFIG_SOC_OMAP2430 - /* XXX 2430 KILLDOMAINWKUP bit? No current users apparently */ static struct powerdomain mdm_pwrdm = { .name = "mdm_pwrdm", .prcm_offs = OMAP2430_MDM_MOD, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRSTS_RET, .banks = 1, @@ -95,29 +92,44 @@ static struct powerdomain mdm_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, /* MEMONSTATE */ }, + .voltdm = { .name = "core" }, }; -#endif /* CONFIG_SOC_OMAP2430 */ - -/* As powerdomains are added or removed above, this list must also be changed */ -static struct powerdomain *powerdomains_omap2xxx[] __initdata = { +/* + * + */ +static struct powerdomain *powerdomains_omap24xx[] __initdata = { &wkup_omap2_pwrdm, &gfx_omap2_pwrdm, - -#ifdef CONFIG_ARCH_OMAP2 &dsp_pwrdm, &mpu_24xx_pwrdm, &core_24xx_pwrdm, -#endif + NULL +}; -#ifdef CONFIG_SOC_OMAP2430 +static struct powerdomain *powerdomains_omap2430[] __initdata = { &mdm_pwrdm, -#endif NULL }; -void __init omap2xxx_powerdomains_init(void) +void __init omap242x_powerdomains_init(void) +{ + if (!cpu_is_omap2420()) + return; + + pwrdm_register_platform_funcs(&omap2_pwrdm_operations); + pwrdm_register_pwrdms(powerdomains_omap24xx); + pwrdm_complete_init(); +} + +void __init omap243x_powerdomains_init(void) { - pwrdm_init(powerdomains_omap2xxx, &omap2_pwrdm_operations); + if (!cpu_is_omap2430()) + return; + + pwrdm_register_platform_funcs(&omap2_pwrdm_operations); + pwrdm_register_pwrdms(powerdomains_omap24xx); + pwrdm_register_pwrdms(powerdomains_omap2430); + pwrdm_complete_init(); } diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c index 469a920a74d..8ef26daeed6 100644 --- a/arch/arm/mach-omap2/powerdomains3xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c @@ -1,7 +1,7 @@ /* * OMAP3 powerdomain definitions * - * Copyright (C) 2007-2008 Texas Instruments, Inc. + * Copyright (C) 2007-2008, 2011 Texas Instruments, Inc. * Copyright (C) 2007-2011 Nokia Corporation * * Paul Walmsley, Jouni Högander @@ -14,6 +14,8 @@ #include <linux/kernel.h> #include <linux/init.h> +#include <plat/cpu.h> + #include "powerdomain.h" #include "powerdomains2xxx_3xxx_data.h" @@ -27,8 +29,6 @@ * 34XX-specific powerdomains, dependencies */ -#ifdef CONFIG_ARCH_OMAP3 - /* * Powerdomains */ @@ -36,7 +36,6 @@ static struct powerdomain iva2_pwrdm = { .name = "iva2_pwrdm", .prcm_offs = OMAP3430_IVA2_MOD, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRSTS_OFF_RET, .banks = 4, @@ -52,12 +51,12 @@ static struct powerdomain iva2_pwrdm = { [2] = PWRSTS_OFF_ON, [3] = PWRSTS_ON, }, + .voltdm = { .name = "mpu_iva" }, }; static struct powerdomain mpu_3xxx_pwrdm = { .name = "mpu_pwrdm", .prcm_offs = MPU_MOD, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRSTS_OFF_RET, .flags = PWRDM_HAS_MPU_QUIRK, @@ -68,6 +67,7 @@ static struct powerdomain mpu_3xxx_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_OFF_ON, }, + .voltdm = { .name = "mpu_iva" }, }; /* @@ -83,10 +83,6 @@ static struct powerdomain mpu_3xxx_pwrdm = { static struct powerdomain core_3xxx_pre_es3_1_pwrdm = { .name = "core_pwrdm", .prcm_offs = CORE_MOD, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 | - CHIP_IS_OMAP3430ES2 | - CHIP_IS_OMAP3430ES3_0 | - CHIP_IS_OMAP3630ES1), .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRSTS_OFF_RET, .banks = 2, @@ -98,13 +94,12 @@ static struct powerdomain core_3xxx_pre_es3_1_pwrdm = { [0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */ [1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */ }, + .voltdm = { .name = "core" }, }; static struct powerdomain core_3xxx_es3_1_pwrdm = { .name = "core_pwrdm", .prcm_offs = CORE_MOD, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES3_1 | - CHIP_GE_OMAP3630ES1_1), .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRSTS_OFF_RET, /* @@ -121,11 +116,11 @@ static struct powerdomain core_3xxx_es3_1_pwrdm = { [0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */ [1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */ }, + .voltdm = { .name = "core" }, }; static struct powerdomain dss_pwrdm = { .name = "dss_pwrdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), .prcm_offs = OMAP3430_DSS_MOD, .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRSTS_RET, @@ -136,6 +131,7 @@ static struct powerdomain dss_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, /* MEMONSTATE */ }, + .voltdm = { .name = "core" }, }; /* @@ -146,7 +142,6 @@ static struct powerdomain dss_pwrdm = { static struct powerdomain sgx_pwrdm = { .name = "sgx_pwrdm", .prcm_offs = OMAP3430ES2_SGX_MOD, - .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2), /* XXX This is accurate for 3430 SGX, but what about GFX? */ .pwrsts = PWRSTS_OFF_ON, .pwrsts_logic_ret = PWRSTS_RET, @@ -157,11 +152,11 @@ static struct powerdomain sgx_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, /* MEMONSTATE */ }, + .voltdm = { .name = "core" }, }; static struct powerdomain cam_pwrdm = { .name = "cam_pwrdm", - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), .prcm_offs = OMAP3430_CAM_MOD, .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRSTS_RET, @@ -172,12 +167,12 @@ static struct powerdomain cam_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, /* MEMONSTATE */ }, + .voltdm = { .name = "core" }, }; static struct powerdomain per_pwrdm = { .name = "per_pwrdm", .prcm_offs = OMAP3430_PER_MOD, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRSTS_OFF_RET, .banks = 1, @@ -187,26 +182,26 @@ static struct powerdomain per_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, /* MEMONSTATE */ }, + .voltdm = { .name = "core" }, }; static struct powerdomain emu_pwrdm = { .name = "emu_pwrdm", .prcm_offs = OMAP3430_EMU_MOD, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), + .voltdm = { .name = "core" }, }; static struct powerdomain neon_pwrdm = { .name = "neon_pwrdm", .prcm_offs = OMAP3430_NEON_MOD, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRSTS_RET, + .voltdm = { .name = "mpu_iva" }, }; static struct powerdomain usbhost_pwrdm = { .name = "usbhost_pwrdm", .prcm_offs = OMAP3430ES2_USBHOST_MOD, - .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2), .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRSTS_RET, /* @@ -223,65 +218,103 @@ static struct powerdomain usbhost_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, /* MEMONSTATE */ }, + .voltdm = { .name = "core" }, }; static struct powerdomain dpll1_pwrdm = { .name = "dpll1_pwrdm", .prcm_offs = MPU_MOD, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), + .voltdm = { .name = "mpu_iva" }, }; static struct powerdomain dpll2_pwrdm = { .name = "dpll2_pwrdm", .prcm_offs = OMAP3430_IVA2_MOD, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), + .voltdm = { .name = "mpu_iva" }, }; static struct powerdomain dpll3_pwrdm = { .name = "dpll3_pwrdm", .prcm_offs = PLL_MOD, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), + .voltdm = { .name = "core" }, }; static struct powerdomain dpll4_pwrdm = { .name = "dpll4_pwrdm", .prcm_offs = PLL_MOD, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), + .voltdm = { .name = "core" }, }; static struct powerdomain dpll5_pwrdm = { .name = "dpll5_pwrdm", .prcm_offs = PLL_MOD, - .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2), + .voltdm = { .name = "core" }, }; /* As powerdomains are added or removed above, this list must also be changed */ -static struct powerdomain *powerdomains_omap3xxx[] __initdata = { - +static struct powerdomain *powerdomains_omap3430_common[] __initdata = { &wkup_omap2_pwrdm, - &gfx_omap2_pwrdm, &iva2_pwrdm, &mpu_3xxx_pwrdm, &neon_pwrdm, - &core_3xxx_pre_es3_1_pwrdm, - &core_3xxx_es3_1_pwrdm, &cam_pwrdm, &dss_pwrdm, &per_pwrdm, &emu_pwrdm, - &sgx_pwrdm, - &usbhost_pwrdm, &dpll1_pwrdm, &dpll2_pwrdm, &dpll3_pwrdm, &dpll4_pwrdm, + NULL +}; + +static struct powerdomain *powerdomains_omap3430es1[] __initdata = { + &gfx_omap2_pwrdm, + &core_3xxx_pre_es3_1_pwrdm, + NULL +}; + +/* also includes 3630ES1.0 */ +static struct powerdomain *powerdomains_omap3430es2_es3_0[] __initdata = { + &core_3xxx_pre_es3_1_pwrdm, + &sgx_pwrdm, + &usbhost_pwrdm, &dpll5_pwrdm, -#endif NULL }; +/* also includes 3630ES1.1+ */ +static struct powerdomain *powerdomains_omap3430es3_1plus[] __initdata = { + &core_3xxx_es3_1_pwrdm, + &sgx_pwrdm, + &usbhost_pwrdm, + &dpll5_pwrdm, + NULL +}; void __init omap3xxx_powerdomains_init(void) { - pwrdm_init(powerdomains_omap3xxx, &omap3_pwrdm_operations); + unsigned int rev; + + if (!cpu_is_omap34xx()) + return; + + pwrdm_register_platform_funcs(&omap3_pwrdm_operations); + pwrdm_register_pwrdms(powerdomains_omap3430_common); + + rev = omap_rev(); + + if (rev == OMAP3430_REV_ES1_0) + pwrdm_register_pwrdms(powerdomains_omap3430es1); + else if (rev == OMAP3430_REV_ES2_0 || rev == OMAP3430_REV_ES2_1 || + rev == OMAP3430_REV_ES3_0 || rev == OMAP3630_REV_ES1_0) + pwrdm_register_pwrdms(powerdomains_omap3430es2_es3_0); + else if (rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2 || + rev == OMAP3517_REV_ES1_0 || rev == OMAP3517_REV_ES1_1 || + rev == OMAP3630_REV_ES1_1 || rev == OMAP3630_REV_ES1_2) + pwrdm_register_pwrdms(powerdomains_omap3430es3_1plus); + else + WARN(1, "OMAP3 powerdomain init: unknown chip type\n"); + + pwrdm_complete_init(); } diff --git a/arch/arm/mach-omap2/powerdomains44xx_data.c b/arch/arm/mach-omap2/powerdomains44xx_data.c index 247e7949511..704664c0e25 100644 --- a/arch/arm/mach-omap2/powerdomains44xx_data.c +++ b/arch/arm/mach-omap2/powerdomains44xx_data.c @@ -33,9 +33,9 @@ /* core_44xx_pwrdm: CORE power domain */ static struct powerdomain core_44xx_pwrdm = { .name = "core_pwrdm", + .voltdm = { .name = "core" }, .prcm_offs = OMAP4430_PRM_CORE_INST, .prcm_partition = OMAP4430_PRM_PARTITION, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), .pwrsts = PWRSTS_RET_ON, .pwrsts_logic_ret = PWRSTS_OFF_RET, .banks = 5, @@ -59,9 +59,9 @@ static struct powerdomain core_44xx_pwrdm = { /* gfx_44xx_pwrdm: 3D accelerator power domain */ static struct powerdomain gfx_44xx_pwrdm = { .name = "gfx_pwrdm", + .voltdm = { .name = "core" }, .prcm_offs = OMAP4430_PRM_GFX_INST, .prcm_partition = OMAP4430_PRM_PARTITION, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), .pwrsts = PWRSTS_OFF_ON, .banks = 1, .pwrsts_mem_ret = { @@ -76,9 +76,9 @@ static struct powerdomain gfx_44xx_pwrdm = { /* abe_44xx_pwrdm: Audio back end power domain */ static struct powerdomain abe_44xx_pwrdm = { .name = "abe_pwrdm", + .voltdm = { .name = "iva" }, .prcm_offs = OMAP4430_PRM_ABE_INST, .prcm_partition = OMAP4430_PRM_PARTITION, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRSTS_OFF, .banks = 2, @@ -96,9 +96,9 @@ static struct powerdomain abe_44xx_pwrdm = { /* dss_44xx_pwrdm: Display subsystem power domain */ static struct powerdomain dss_44xx_pwrdm = { .name = "dss_pwrdm", + .voltdm = { .name = "core" }, .prcm_offs = OMAP4430_PRM_DSS_INST, .prcm_partition = OMAP4430_PRM_PARTITION, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRSTS_OFF, .banks = 1, @@ -114,9 +114,9 @@ static struct powerdomain dss_44xx_pwrdm = { /* tesla_44xx_pwrdm: Tesla processor power domain */ static struct powerdomain tesla_44xx_pwrdm = { .name = "tesla_pwrdm", + .voltdm = { .name = "iva" }, .prcm_offs = OMAP4430_PRM_TESLA_INST, .prcm_partition = OMAP4430_PRM_PARTITION, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRSTS_OFF_RET, .banks = 3, @@ -136,9 +136,9 @@ static struct powerdomain tesla_44xx_pwrdm = { /* wkup_44xx_pwrdm: Wake-up power domain */ static struct powerdomain wkup_44xx_pwrdm = { .name = "wkup_pwrdm", + .voltdm = { .name = "wakeup" }, .prcm_offs = OMAP4430_PRM_WKUP_INST, .prcm_partition = OMAP4430_PRM_PARTITION, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), .pwrsts = PWRSTS_ON, .banks = 1, .pwrsts_mem_ret = { @@ -152,9 +152,9 @@ static struct powerdomain wkup_44xx_pwrdm = { /* cpu0_44xx_pwrdm: MPU0 processor and Neon coprocessor power domain */ static struct powerdomain cpu0_44xx_pwrdm = { .name = "cpu0_pwrdm", + .voltdm = { .name = "mpu" }, .prcm_offs = OMAP4430_PRCM_MPU_CPU0_INST, .prcm_partition = OMAP4430_PRCM_MPU_PARTITION, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRSTS_OFF_RET, .banks = 1, @@ -169,9 +169,9 @@ static struct powerdomain cpu0_44xx_pwrdm = { /* cpu1_44xx_pwrdm: MPU1 processor and Neon coprocessor power domain */ static struct powerdomain cpu1_44xx_pwrdm = { .name = "cpu1_pwrdm", + .voltdm = { .name = "mpu" }, .prcm_offs = OMAP4430_PRCM_MPU_CPU1_INST, .prcm_partition = OMAP4430_PRCM_MPU_PARTITION, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRSTS_OFF_RET, .banks = 1, @@ -186,9 +186,9 @@ static struct powerdomain cpu1_44xx_pwrdm = { /* emu_44xx_pwrdm: Emulation power domain */ static struct powerdomain emu_44xx_pwrdm = { .name = "emu_pwrdm", + .voltdm = { .name = "wakeup" }, .prcm_offs = OMAP4430_PRM_EMU_INST, .prcm_partition = OMAP4430_PRM_PARTITION, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), .pwrsts = PWRSTS_OFF_ON, .banks = 1, .pwrsts_mem_ret = { @@ -202,9 +202,9 @@ static struct powerdomain emu_44xx_pwrdm = { /* mpu_44xx_pwrdm: Modena processor and the Neon coprocessor power domain */ static struct powerdomain mpu_44xx_pwrdm = { .name = "mpu_pwrdm", + .voltdm = { .name = "mpu" }, .prcm_offs = OMAP4430_PRM_MPU_INST, .prcm_partition = OMAP4430_PRM_PARTITION, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), .pwrsts = PWRSTS_RET_ON, .pwrsts_logic_ret = PWRSTS_OFF_RET, .banks = 3, @@ -223,9 +223,9 @@ static struct powerdomain mpu_44xx_pwrdm = { /* ivahd_44xx_pwrdm: IVA-HD power domain */ static struct powerdomain ivahd_44xx_pwrdm = { .name = "ivahd_pwrdm", + .voltdm = { .name = "iva" }, .prcm_offs = OMAP4430_PRM_IVAHD_INST, .prcm_partition = OMAP4430_PRM_PARTITION, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRSTS_OFF, .banks = 4, @@ -247,9 +247,9 @@ static struct powerdomain ivahd_44xx_pwrdm = { /* cam_44xx_pwrdm: Camera subsystem power domain */ static struct powerdomain cam_44xx_pwrdm = { .name = "cam_pwrdm", + .voltdm = { .name = "core" }, .prcm_offs = OMAP4430_PRM_CAM_INST, .prcm_partition = OMAP4430_PRM_PARTITION, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), .pwrsts = PWRSTS_OFF_ON, .banks = 1, .pwrsts_mem_ret = { @@ -264,9 +264,9 @@ static struct powerdomain cam_44xx_pwrdm = { /* l3init_44xx_pwrdm: L3 initators pheripherals power domain */ static struct powerdomain l3init_44xx_pwrdm = { .name = "l3init_pwrdm", + .voltdm = { .name = "core" }, .prcm_offs = OMAP4430_PRM_L3INIT_INST, .prcm_partition = OMAP4430_PRM_PARTITION, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), .pwrsts = PWRSTS_RET_ON, .pwrsts_logic_ret = PWRSTS_OFF_RET, .banks = 1, @@ -282,9 +282,9 @@ static struct powerdomain l3init_44xx_pwrdm = { /* l4per_44xx_pwrdm: Target peripherals power domain */ static struct powerdomain l4per_44xx_pwrdm = { .name = "l4per_pwrdm", + .voltdm = { .name = "core" }, .prcm_offs = OMAP4430_PRM_L4PER_INST, .prcm_partition = OMAP4430_PRM_PARTITION, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), .pwrsts = PWRSTS_RET_ON, .pwrsts_logic_ret = PWRSTS_OFF_RET, .banks = 2, @@ -305,18 +305,18 @@ static struct powerdomain l4per_44xx_pwrdm = { */ static struct powerdomain always_on_core_44xx_pwrdm = { .name = "always_on_core_pwrdm", + .voltdm = { .name = "core" }, .prcm_offs = OMAP4430_PRM_ALWAYS_ON_INST, .prcm_partition = OMAP4430_PRM_PARTITION, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), .pwrsts = PWRSTS_ON, }; /* cefuse_44xx_pwrdm: Customer efuse controller power domain */ static struct powerdomain cefuse_44xx_pwrdm = { .name = "cefuse_pwrdm", + .voltdm = { .name = "core" }, .prcm_offs = OMAP4430_PRM_CEFUSE_INST, .prcm_partition = OMAP4430_PRM_PARTITION, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), .pwrsts = PWRSTS_OFF_ON, .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, }; @@ -352,5 +352,7 @@ static struct powerdomain *powerdomains_omap44xx[] __initdata = { void __init omap44xx_powerdomains_init(void) { - pwrdm_init(powerdomains_omap44xx, &omap4_pwrdm_operations); + pwrdm_register_platform_funcs(&omap4_pwrdm_operations); + pwrdm_register_pwrdms(powerdomains_omap44xx); + pwrdm_complete_init(); } diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index 2e40a5cf016..8db5f035eb0 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -151,17 +151,10 @@ int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest, void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals) { - /* Static mapping, never released */ - if (omap2_globals->prm) { - prm_base = ioremap(omap2_globals->prm, SZ_8K); - WARN_ON(!prm_base); - } - if (omap2_globals->cm) { - cm_base = ioremap(omap2_globals->cm, SZ_8K); - WARN_ON(!cm_base); - } - if (omap2_globals->cm2) { - cm2_base = ioremap(omap2_globals->cm2, SZ_8K); - WARN_ON(!cm2_base); - } + if (omap2_globals->prm) + prm_base = omap2_globals->prm; + if (omap2_globals->cm) + cm_base = omap2_globals->cm; + if (omap2_globals->cm2) + cm2_base = omap2_globals->cm2; } diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index 051213fbc34..f02d87f68e5 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -20,6 +20,8 @@ #include <plat/cpu.h> #include <plat/prcm.h> +#include "vp.h" + #include "prm2xxx_3xxx.h" #include "cm2xxx_3xxx.h" #include "prm-regbits-24xx.h" @@ -156,3 +158,57 @@ int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift) return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0; } + +/* PRM VP */ + +/* + * struct omap3_vp - OMAP3 VP register access description. + * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg + */ +struct omap3_vp { + u32 tranxdone_status; +}; + +static struct omap3_vp omap3_vp[] = { + [OMAP3_VP_VDD_MPU_ID] = { + .tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK, + }, + [OMAP3_VP_VDD_CORE_ID] = { + .tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK, + }, +}; + +#define MAX_VP_ID ARRAY_SIZE(omap3_vp); + +u32 omap3_prm_vp_check_txdone(u8 vp_id) +{ + struct omap3_vp *vp = &omap3_vp[vp_id]; + u32 irqstatus; + + irqstatus = omap2_prm_read_mod_reg(OCP_MOD, + OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + return irqstatus & vp->tranxdone_status; +} + +void omap3_prm_vp_clear_txdone(u8 vp_id) +{ + struct omap3_vp *vp = &omap3_vp[vp_id]; + + omap2_prm_write_mod_reg(vp->tranxdone_status, + OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); +} + +u32 omap3_prm_vcvp_read(u8 offset) +{ + return omap2_prm_read_mod_reg(OMAP3430_GR_MOD, offset); +} + +void omap3_prm_vcvp_write(u32 val, u8 offset) +{ + omap2_prm_write_mod_reg(val, OMAP3430_GR_MOD, offset); +} + +u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset) +{ + return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset); +} diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h index a1fc62a39db..cef533df086 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.h +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h @@ -303,7 +303,19 @@ extern int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift); extern int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift); extern int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift); +/* OMAP3-specific VP functions */ +u32 omap3_prm_vp_check_txdone(u8 vp_id); +void omap3_prm_vp_clear_txdone(u8 vp_id); + +/* + * OMAP3 access functions for voltage controller (VC) and + * voltage proccessor (VP) in the PRM. + */ +extern u32 omap3_prm_vcvp_read(u8 offset); +extern void omap3_prm_vcvp_write(u32 val, u8 offset); +extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); #endif /* CONFIG_ARCH_OMAP4 */ + #endif /* diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index 00165558fc4..495a31a7e8a 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -21,8 +21,11 @@ #include <plat/cpu.h> #include <plat/prcm.h> +#include "vp.h" #include "prm44xx.h" #include "prm-regbits-44xx.h" +#include "prcm44xx.h" +#include "prminst44xx.h" /* PRM low-level functions */ @@ -50,3 +53,71 @@ u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 reg) return v; } + +/* PRM VP */ + +/* + * struct omap4_vp - OMAP4 VP register access description. + * @irqstatus_mpu: offset to IRQSTATUS_MPU register for VP + * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg + */ +struct omap4_vp { + u32 irqstatus_mpu; + u32 tranxdone_status; +}; + +static struct omap4_vp omap4_vp[] = { + [OMAP4_VP_VDD_MPU_ID] = { + .irqstatus_mpu = OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET, + .tranxdone_status = OMAP4430_VP_MPU_TRANXDONE_ST_MASK, + }, + [OMAP4_VP_VDD_IVA_ID] = { + .irqstatus_mpu = OMAP4_PRM_IRQSTATUS_MPU_OFFSET, + .tranxdone_status = OMAP4430_VP_IVA_TRANXDONE_ST_MASK, + }, + [OMAP4_VP_VDD_CORE_ID] = { + .irqstatus_mpu = OMAP4_PRM_IRQSTATUS_MPU_OFFSET, + .tranxdone_status = OMAP4430_VP_CORE_TRANXDONE_ST_MASK, + }, +}; + +u32 omap4_prm_vp_check_txdone(u8 vp_id) +{ + struct omap4_vp *vp = &omap4_vp[vp_id]; + u32 irqstatus; + + irqstatus = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION, + OMAP4430_PRM_OCP_SOCKET_INST, + vp->irqstatus_mpu); + return irqstatus & vp->tranxdone_status; +} + +void omap4_prm_vp_clear_txdone(u8 vp_id) +{ + struct omap4_vp *vp = &omap4_vp[vp_id]; + + omap4_prminst_write_inst_reg(vp->tranxdone_status, + OMAP4430_PRM_PARTITION, + OMAP4430_PRM_OCP_SOCKET_INST, + vp->irqstatus_mpu); +}; + +u32 omap4_prm_vcvp_read(u8 offset) +{ + return omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION, + OMAP4430_PRM_DEVICE_INST, offset); +} + +void omap4_prm_vcvp_write(u32 val, u8 offset) +{ + omap4_prminst_write_inst_reg(val, OMAP4430_PRM_PARTITION, + OMAP4430_PRM_DEVICE_INST, offset); +} + +u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset) +{ + return omap4_prminst_rmw_inst_reg_bits(mask, bits, + OMAP4430_PRM_PARTITION, + OMAP4430_PRM_DEVICE_INST, + offset); +} diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h index 7dfa379b625..3d66ccd849d 100644 --- a/arch/arm/mach-omap2/prm44xx.h +++ b/arch/arm/mach-omap2/prm44xx.h @@ -751,6 +751,18 @@ extern u32 omap4_prm_read_inst_reg(s16 inst, u16 idx); extern void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 idx); extern u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx); +/* OMAP4-specific VP functions */ +u32 omap4_prm_vp_check_txdone(u8 vp_id); +void omap4_prm_vp_clear_txdone(u8 vp_id); + +/* + * OMAP4 access functions for voltage controller (VC) and + * voltage proccessor (VP) in the PRM. + */ +extern u32 omap4_prm_vcvp_read(u8 offset); +extern void omap4_prm_vcvp_write(u32 val, u8 offset); +extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); + # endif #endif diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c index da6f3a63b5d..8f278287477 100644 --- a/arch/arm/mach-omap2/sdrc.c +++ b/arch/arm/mach-omap2/sdrc.c @@ -117,15 +117,10 @@ int omap2_sdrc_get_params(unsigned long r, void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals) { - /* Static mapping, never released */ - if (omap2_globals->sdrc) { - omap2_sdrc_base = ioremap(omap2_globals->sdrc, SZ_64K); - WARN_ON(!omap2_sdrc_base); - } - if (omap2_globals->sms) { - omap2_sms_base = ioremap(omap2_globals->sms, SZ_64K); - WARN_ON(!omap2_sms_base); - } + if (omap2_globals->sdrc) + omap2_sdrc_base = omap2_globals->sdrc; + if (omap2_globals->sms) + omap2_sms_base = omap2_globals->sms; } /** diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 466fc722fa0..9992dbfdfdb 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -107,28 +107,6 @@ struct omap_uart_state { static LIST_HEAD(uart_list); static u8 num_uarts; -static int uart_idle_hwmod(struct omap_device *od) -{ - omap_hwmod_idle(od->hwmods[0]); - - return 0; -} - -static int uart_enable_hwmod(struct omap_device *od) -{ - omap_hwmod_enable(od->hwmods[0]); - - return 0; -} - -static struct omap_device_pm_latency omap_uart_latency[] = { - { - .deactivate_func = uart_idle_hwmod, - .activate_func = uart_enable_hwmod, - .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, - }, -}; - static inline unsigned int __serial_read_reg(struct uart_port *up, int offset) { @@ -711,7 +689,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) { struct omap_uart_state *uart; struct omap_hwmod *oh; - struct omap_device *od; + struct platform_device *pdev; void *pdata = NULL; u32 pdata_size = 0; char *name; @@ -799,20 +777,19 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) if (WARN_ON(!oh)) return; - od = omap_device_build(name, uart->num, oh, pdata, pdata_size, - omap_uart_latency, - ARRAY_SIZE(omap_uart_latency), false); - WARN(IS_ERR(od), "Could not build omap_device for %s: %s.\n", + pdev = omap_device_build(name, uart->num, oh, pdata, pdata_size, + NULL, 0, false); + WARN(IS_ERR(pdev), "Could not build omap_device for %s: %s.\n", name, oh->name); - omap_device_disable_idle_on_suspend(od); + omap_device_disable_idle_on_suspend(pdev); oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt); uart->irq = oh->mpu_irqs[0].irq; uart->regshift = 2; uart->mapbase = oh->slaves[0]->addr->pa_start; uart->membase = omap_hwmod_get_mpu_rt_va(oh); - uart->pdev = &od->pdev; + uart->pdev = pdev; oh->dev_attr = uart; @@ -846,8 +823,8 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) if ((cpu_is_omap34xx() && uart->padconf) || (uart->wk_en && uart->wk_mask)) { - device_init_wakeup(&od->pdev.dev, true); - DEV_CREATE_FILE(&od->pdev.dev, &dev_attr_sleep_timeout); + device_init_wakeup(&pdev->dev, true); + DEV_CREATE_FILE(&pdev->dev, &dev_attr_sleep_timeout); } /* Enable the MDR1 errata for OMAP3 */ diff --git a/arch/arm/mach-omap2/smartreflex-class3.c b/arch/arm/mach-omap2/smartreflex-class3.c index f438cf4d847..53d9d0a5b39 100644 --- a/arch/arm/mach-omap2/smartreflex-class3.c +++ b/arch/arm/mach-omap2/smartreflex-class3.c @@ -15,7 +15,7 @@ static int sr_class3_enable(struct voltagedomain *voltdm) { - unsigned long volt = omap_voltage_get_nom_volt(voltdm); + unsigned long volt = voltdm_get_voltage(voltdm); if (!volt) { pr_warning("%s: Curr voltage unknown. Cannot enable sr_%s\n", @@ -32,7 +32,7 @@ static int sr_class3_disable(struct voltagedomain *voltdm, int is_volt_reset) omap_vp_disable(voltdm); sr_disable(voltdm); if (is_volt_reset) - omap_voltage_reset(voltdm); + voltdm_reset(voltdm); return 0; } diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 34c01a7de81..bb606c9709b 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -62,6 +62,7 @@ static LIST_HEAD(sr_list); static struct omap_sr_class_data *sr_class; static struct omap_sr_pmic_data *sr_pmic_data; +static struct dentry *sr_dbg_dir; static inline void sr_write_reg(struct omap_sr *sr, unsigned offset, u32 value) { @@ -826,9 +827,10 @@ static int __init omap_sr_probe(struct platform_device *pdev) struct omap_sr *sr_info = kzalloc(sizeof(struct omap_sr), GFP_KERNEL); struct omap_sr_data *pdata = pdev->dev.platform_data; struct resource *mem, *irq; - struct dentry *vdd_dbg_dir, *nvalue_dir; + struct dentry *nvalue_dir; struct omap_volt_data *volt_data; int i, ret = 0; + char *name; if (!sr_info) { dev_err(&pdev->dev, "%s: unable to allocate sr_info\n", @@ -899,18 +901,25 @@ static int __init omap_sr_probe(struct platform_device *pdev) } dev_info(&pdev->dev, "%s: SmartReflex driver initialized\n", __func__); + if (!sr_dbg_dir) { + sr_dbg_dir = debugfs_create_dir("smartreflex", NULL); + if (!sr_dbg_dir) { + ret = PTR_ERR(sr_dbg_dir); + pr_err("%s:sr debugfs dir creation failed(%d)\n", + __func__, ret); + goto err_iounmap; + } + } - /* - * If the voltage domain debugfs directory is not created, do - * not try to create rest of the debugfs entries. - */ - vdd_dbg_dir = omap_voltage_get_dbgdir(sr_info->voltdm); - if (!vdd_dbg_dir) { - ret = -EINVAL; + name = kasprintf(GFP_KERNEL, "sr_%s", sr_info->voltdm->name); + if (!name) { + dev_err(&pdev->dev, "%s: Unable to alloc debugfs name\n", + __func__); + ret = -ENOMEM; goto err_iounmap; } - - sr_info->dbg_dir = debugfs_create_dir("smartreflex", vdd_dbg_dir); + sr_info->dbg_dir = debugfs_create_dir(name, sr_dbg_dir); + kfree(name); if (IS_ERR(sr_info->dbg_dir)) { dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n", __func__); diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index 10d3c5ee801..9f43fcc05d3 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c @@ -31,14 +31,6 @@ static bool sr_enable_on_init; -static struct omap_device_pm_latency omap_sr_latency[] = { - { - .deactivate_func = omap_device_idle_hwmods, - .activate_func = omap_device_enable_hwmods, - .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST - }, -}; - /* Read EFUSE values from control registers for OMAP3430 */ static void __init sr_set_nvalues(struct omap_volt_data *volt_data, struct omap_sr_data *sr_data) @@ -80,7 +72,7 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data, static int sr_dev_init(struct omap_hwmod *oh, void *user) { struct omap_sr_data *sr_data; - struct omap_device *od; + struct platform_device *pdev; struct omap_volt_data *volt_data; char *name = "smartreflex"; static int i; @@ -102,7 +94,7 @@ static int sr_dev_init(struct omap_hwmod *oh, void *user) sr_data->senn_mod = 0x1; sr_data->senp_mod = 0x1; - sr_data->voltdm = omap_voltage_domain_lookup(oh->vdd_name); + sr_data->voltdm = voltdm_lookup(oh->vdd_name); if (IS_ERR(sr_data->voltdm)) { pr_err("%s: Unable to get voltage domain pointer for VDD %s\n", __func__, oh->vdd_name); @@ -120,10 +112,9 @@ static int sr_dev_init(struct omap_hwmod *oh, void *user) sr_data->enable_on_init = sr_enable_on_init; - od = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data), - omap_sr_latency, - ARRAY_SIZE(omap_sr_latency), 0); - if (IS_ERR(od)) + pdev = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data), + NULL, 0, 0); + if (IS_ERR(pdev)) pr_warning("%s: Could not build omap_device for %s: %s.\n\n", __func__, name, oh->name); exit: diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index cf1de7d2630..e49fc7be222 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -35,6 +35,7 @@ #include <linux/irq.h> #include <linux/clocksource.h> #include <linux/clockchips.h> +#include <linux/slab.h> #include <asm/mach/time.h> #include <plat/dmtimer.h> @@ -42,6 +43,10 @@ #include <asm/sched_clock.h> #include <plat/common.h> #include <plat/omap_hwmod.h> +#include <plat/omap_device.h> +#include <plat/omap-pm.h> + +#include "powerdomain.h" /* Parent clocks, eventually these will come from the clock framework */ @@ -67,7 +72,7 @@ /* MAX_GPTIMER_ID: number of GPTIMERs on the chip */ #define MAX_GPTIMER_ID 12 -u32 sys_timer_reserved; +static u32 sys_timer_reserved; /* Clockevent code */ @@ -78,7 +83,7 @@ static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id) { struct clock_event_device *evt = &clockevent_gpt; - __omap_dm_timer_write_status(clkev.io_base, OMAP_TIMER_INT_OVERFLOW); + __omap_dm_timer_write_status(&clkev, OMAP_TIMER_INT_OVERFLOW); evt->event_handler(evt); return IRQ_HANDLED; @@ -93,7 +98,7 @@ static struct irqaction omap2_gp_timer_irq = { static int omap2_gp_timer_set_next_event(unsigned long cycles, struct clock_event_device *evt) { - __omap_dm_timer_load_start(clkev.io_base, OMAP_TIMER_CTRL_ST, + __omap_dm_timer_load_start(&clkev, OMAP_TIMER_CTRL_ST, 0xffffffff - cycles, 1); return 0; @@ -104,16 +109,16 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode, { u32 period; - __omap_dm_timer_stop(clkev.io_base, 1, clkev.rate); + __omap_dm_timer_stop(&clkev, 1, clkev.rate); switch (mode) { case CLOCK_EVT_MODE_PERIODIC: period = clkev.rate / HZ; period -= 1; /* Looks like we need to first set the load value separately */ - __omap_dm_timer_write(clkev.io_base, OMAP_TIMER_LOAD_REG, + __omap_dm_timer_write(&clkev, OMAP_TIMER_LOAD_REG, 0xffffffff - period, 1); - __omap_dm_timer_load_start(clkev.io_base, + __omap_dm_timer_load_start(&clkev, OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST, 0xffffffff - period, 1); break; @@ -189,7 +194,8 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, clk_put(src); } } - __omap_dm_timer_reset(timer->io_base, 1, 1); + __omap_dm_timer_init_regs(timer); + __omap_dm_timer_reset(timer, 1, 1); timer->posted = 1; timer->rate = clk_get_rate(timer->fclk); @@ -210,7 +216,7 @@ static void __init omap2_gp_clockevent_init(int gptimer_id, omap2_gp_timer_irq.dev_id = (void *)&clkev; setup_irq(clkev.irq, &omap2_gp_timer_irq); - __omap_dm_timer_int_enable(clkev.io_base, OMAP_TIMER_INT_OVERFLOW); + __omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW); clockevent_gpt.mult = div_sc(clkev.rate, NSEC_PER_SEC, clockevent_gpt.shift); @@ -251,7 +257,7 @@ static struct omap_dm_timer clksrc; static DEFINE_CLOCK_DATA(cd); static cycle_t clocksource_read_cycles(struct clocksource *cs) { - return (cycle_t)__omap_dm_timer_read_counter(clksrc.io_base, 1); + return (cycle_t)__omap_dm_timer_read_counter(&clksrc, 1); } static struct clocksource clocksource_gpt = { @@ -266,7 +272,7 @@ static void notrace dmtimer_update_sched_clock(void) { u32 cyc; - cyc = __omap_dm_timer_read_counter(clksrc.io_base, 1); + cyc = __omap_dm_timer_read_counter(&clksrc, 1); update_sched_clock(&cd, cyc, (u32)~0); } @@ -276,7 +282,7 @@ unsigned long long notrace sched_clock(void) u32 cyc = 0; if (clksrc.reserved) - cyc = __omap_dm_timer_read_counter(clksrc.io_base, 1); + cyc = __omap_dm_timer_read_counter(&clksrc, 1); return cyc_to_sched_clock(&cd, cyc, (u32)~0); } @@ -293,7 +299,7 @@ static void __init omap2_gp_clocksource_init(int gptimer_id, pr_info("OMAP clocksource: GPTIMER%d at %lu Hz\n", gptimer_id, clksrc.rate); - __omap_dm_timer_load_start(clksrc.io_base, + __omap_dm_timer_load_start(&clksrc, OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, 1); init_sched_clock(&cd, dmtimer_update_sched_clock, 32, clksrc.rate); @@ -341,3 +347,167 @@ static void __init omap4_timer_init(void) } OMAP_SYS_TIMER(4) #endif + +/** + * omap2_dm_timer_set_src - change the timer input clock source + * @pdev: timer platform device pointer + * @source: array index of parent clock source + */ +static int omap2_dm_timer_set_src(struct platform_device *pdev, int source) +{ + int ret; + struct dmtimer_platform_data *pdata = pdev->dev.platform_data; + struct clk *fclk, *parent; + char *parent_name = NULL; + + fclk = clk_get(&pdev->dev, "fck"); + if (IS_ERR_OR_NULL(fclk)) { + dev_err(&pdev->dev, "%s: %d: clk_get() FAILED\n", + __func__, __LINE__); + return -EINVAL; + } + + switch (source) { + case OMAP_TIMER_SRC_SYS_CLK: + parent_name = "sys_ck"; + break; + + case OMAP_TIMER_SRC_32_KHZ: + parent_name = "32k_ck"; + break; + + case OMAP_TIMER_SRC_EXT_CLK: + if (pdata->timer_ip_version == OMAP_TIMER_IP_VERSION_1) { + parent_name = "alt_ck"; + break; + } + dev_err(&pdev->dev, "%s: %d: invalid clk src.\n", + __func__, __LINE__); + clk_put(fclk); + return -EINVAL; + } + + parent = clk_get(&pdev->dev, parent_name); + if (IS_ERR_OR_NULL(parent)) { + dev_err(&pdev->dev, "%s: %d: clk_get() %s FAILED\n", + __func__, __LINE__, parent_name); + clk_put(fclk); + return -EINVAL; + } + + ret = clk_set_parent(fclk, parent); + if (IS_ERR_VALUE(ret)) { + dev_err(&pdev->dev, "%s: clk_set_parent() to %s FAILED\n", + __func__, parent_name); + ret = -EINVAL; + } + + clk_put(parent); + clk_put(fclk); + + return ret; +} + +struct omap_device_pm_latency omap2_dmtimer_latency[] = { + { + .deactivate_func = omap_device_idle_hwmods, + .activate_func = omap_device_enable_hwmods, + .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, + }, +}; + +/** + * omap_timer_init - build and register timer device with an + * associated timer hwmod + * @oh: timer hwmod pointer to be used to build timer device + * @user: parameter that can be passed from calling hwmod API + * + * Called by omap_hwmod_for_each_by_class to register each of the timer + * devices present in the system. The number of timer devices is known + * by parsing through the hwmod database for a given class name. At the + * end of function call memory is allocated for timer device and it is + * registered to the framework ready to be proved by the driver. + */ +static int __init omap_timer_init(struct omap_hwmod *oh, void *unused) +{ + int id; + int ret = 0; + char *name = "omap_timer"; + struct dmtimer_platform_data *pdata; + struct platform_device *pdev; + struct omap_timer_capability_dev_attr *timer_dev_attr; + struct powerdomain *pwrdm; + + pr_debug("%s: %s\n", __func__, oh->name); + + /* on secure device, do not register secure timer */ + timer_dev_attr = oh->dev_attr; + if (omap_type() != OMAP2_DEVICE_TYPE_GP && timer_dev_attr) + if (timer_dev_attr->timer_capability == OMAP_TIMER_SECURE) + return ret; + + pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + pr_err("%s: No memory for [%s]\n", __func__, oh->name); + return -ENOMEM; + } + + /* + * Extract the IDs from name field in hwmod database + * and use the same for constructing ids' for the + * timer devices. In a way, we are avoiding usage of + * static variable witin the function to do the same. + * CAUTION: We have to be careful and make sure the + * name in hwmod database does not change in which case + * we might either make corresponding change here or + * switch back static variable mechanism. + */ + sscanf(oh->name, "timer%2d", &id); + + pdata->set_timer_src = omap2_dm_timer_set_src; + pdata->timer_ip_version = oh->class->rev; + + /* Mark clocksource and clockevent timers as reserved */ + if ((sys_timer_reserved >> (id - 1)) & 0x1) + pdata->reserved = 1; + + pwrdm = omap_hwmod_get_pwrdm(oh); + pdata->loses_context = pwrdm_can_ever_lose_context(pwrdm); +#ifdef CONFIG_PM + pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count; +#endif + pdev = omap_device_build(name, id, oh, pdata, sizeof(*pdata), + omap2_dmtimer_latency, + ARRAY_SIZE(omap2_dmtimer_latency), + 0); + + if (IS_ERR(pdev)) { + pr_err("%s: Can't build omap_device for %s: %s.\n", + __func__, name, oh->name); + ret = -EINVAL; + } + + kfree(pdata); + + return ret; +} + +/** + * omap2_dm_timer_init - top level regular device initialization + * + * Uses dedicated hwmod api to parse through hwmod database for + * given class name and then build and register the timer device. + */ +static int __init omap2_dm_timer_init(void) +{ + int ret; + + ret = omap_hwmod_for_each_by_class("timer", omap_timer_init, NULL); + if (unlikely(ret)) { + pr_err("%s: device registration failed.\n", __func__); + return -EINVAL; + } + + return 0; +} +arch_initcall(omap2_dm_timer_init); diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index a65145b02a5..47fb5d60763 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -60,14 +60,6 @@ static struct musb_hdrc_platform_data musb_plat = { static u64 musb_dmamask = DMA_BIT_MASK(32); -static struct omap_device_pm_latency omap_musb_latency[] = { - { - .deactivate_func = omap_device_idle_hwmods, - .activate_func = omap_device_enable_hwmods, - .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, - }, -}; - static void usb_musb_mux_init(struct omap_musb_board_data *board_data) { switch (board_data->interface_type) { @@ -115,7 +107,6 @@ static struct omap_musb_board_data musb_default_board_data = { void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) { struct omap_hwmod *oh; - struct omap_device *od; struct platform_device *pdev; struct device *dev; int bus_id = -1; @@ -137,9 +128,6 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) musb_plat.mode = board_data->mode; musb_plat.extvbus = board_data->extvbus; - if (cpu_is_omap44xx()) - omap4430_phy_init(dev); - if (cpu_is_omap3517() || cpu_is_omap3505()) { oh_name = "am35x_otg_hs"; name = "musb-am35x"; @@ -148,22 +136,19 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) name = "musb-omap2430"; } - oh = omap_hwmod_lookup(oh_name); - if (!oh) { - pr_err("Could not look up %s\n", oh_name); - return; - } + oh = omap_hwmod_lookup(oh_name); + if (WARN(!oh, "%s: could not find omap_hwmod for %s\n", + __func__, oh_name)) + return; - od = omap_device_build(name, bus_id, oh, &musb_plat, - sizeof(musb_plat), omap_musb_latency, - ARRAY_SIZE(omap_musb_latency), false); - if (IS_ERR(od)) { + pdev = omap_device_build(name, bus_id, oh, &musb_plat, + sizeof(musb_plat), NULL, 0, false); + if (IS_ERR(pdev)) { pr_err("Could not build omap_device for %s %s\n", name, oh_name); return; } - pdev = &od->pdev; dev = &pdev->dev; get_device(dev); dev->dma_mask = &musb_dmamask; diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c new file mode 100644 index 00000000000..031d116fbf1 --- /dev/null +++ b/arch/arm/mach-omap2/vc.c @@ -0,0 +1,367 @@ +/* + * OMAP Voltage Controller (VC) interface + * + * Copyright (C) 2011 Texas Instruments, Inc. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/init.h> + +#include <plat/cpu.h> + +#include "voltage.h" +#include "vc.h" +#include "prm-regbits-34xx.h" +#include "prm-regbits-44xx.h" +#include "prm44xx.h" + +/** + * struct omap_vc_channel_cfg - describe the cfg_channel bitfield + * @sa: bit for slave address + * @rav: bit for voltage configuration register + * @rac: bit for command configuration register + * @racen: enable bit for RAC + * @cmd: bit for command value set selection + * + * Channel configuration bits, common for OMAP3+ + * OMAP3 register: PRM_VC_CH_CONF + * OMAP4 register: PRM_VC_CFG_CHANNEL + * OMAP5 register: PRM_VC_SMPS_<voltdm>_CONFIG + */ +struct omap_vc_channel_cfg { + u8 sa; + u8 rav; + u8 rac; + u8 racen; + u8 cmd; +}; + +static struct omap_vc_channel_cfg vc_default_channel_cfg = { + .sa = BIT(0), + .rav = BIT(1), + .rac = BIT(2), + .racen = BIT(3), + .cmd = BIT(4), +}; + +/* + * On OMAP3+, all VC channels have the above default bitfield + * configuration, except the OMAP4 MPU channel. This appears + * to be a freak accident as every other VC channel has the + * default configuration, thus creating a mutant channel config. + */ +static struct omap_vc_channel_cfg vc_mutant_channel_cfg = { + .sa = BIT(0), + .rav = BIT(2), + .rac = BIT(3), + .racen = BIT(4), + .cmd = BIT(1), +}; + +static struct omap_vc_channel_cfg *vc_cfg_bits; +#define CFG_CHANNEL_MASK 0x1f + +/** + * omap_vc_config_channel - configure VC channel to PMIC mappings + * @voltdm: pointer to voltagdomain defining the desired VC channel + * + * Configures the VC channel to PMIC mappings for the following + * PMIC settings + * - i2c slave address (SA) + * - voltage configuration address (RAV) + * - command configuration address (RAC) and enable bit (RACEN) + * - command values for ON, ONLP, RET and OFF (CMD) + * + * This function currently only allows flexible configuration of the + * non-default channel. Starting with OMAP4, there are more than 2 + * channels, with one defined as the default (on OMAP4, it's MPU.) + * Only the non-default channel can be configured. + */ +static int omap_vc_config_channel(struct voltagedomain *voltdm) +{ + struct omap_vc_channel *vc = voltdm->vc; + + /* + * For default channel, the only configurable bit is RACEN. + * All others must stay at zero (see function comment above.) + */ + if (vc->flags & OMAP_VC_CHANNEL_DEFAULT) + vc->cfg_channel &= vc_cfg_bits->racen; + + voltdm->rmw(CFG_CHANNEL_MASK << vc->cfg_channel_sa_shift, + vc->cfg_channel << vc->cfg_channel_sa_shift, + vc->cfg_channel_reg); + + return 0; +} + +/* Voltage scale and accessory APIs */ +int omap_vc_pre_scale(struct voltagedomain *voltdm, + unsigned long target_volt, + u8 *target_vsel, u8 *current_vsel) +{ + struct omap_vc_channel *vc = voltdm->vc; + u32 vc_cmdval; + + /* Check if sufficient pmic info is available for this vdd */ + if (!voltdm->pmic) { + pr_err("%s: Insufficient pmic info to scale the vdd_%s\n", + __func__, voltdm->name); + return -EINVAL; + } + + if (!voltdm->pmic->uv_to_vsel) { + pr_err("%s: PMIC function to convert voltage in uV to" + "vsel not registered. Hence unable to scale voltage" + "for vdd_%s\n", __func__, voltdm->name); + return -ENODATA; + } + + if (!voltdm->read || !voltdm->write) { + pr_err("%s: No read/write API for accessing vdd_%s regs\n", + __func__, voltdm->name); + return -EINVAL; + } + + *target_vsel = voltdm->pmic->uv_to_vsel(target_volt); + *current_vsel = voltdm->pmic->uv_to_vsel(voltdm->nominal_volt); + + /* Setting the ON voltage to the new target voltage */ + vc_cmdval = voltdm->read(vc->cmdval_reg); + vc_cmdval &= ~vc->common->cmd_on_mask; + vc_cmdval |= (*target_vsel << vc->common->cmd_on_shift); + voltdm->write(vc_cmdval, vc->cmdval_reg); + + omap_vp_update_errorgain(voltdm, target_volt); + + return 0; +} + +void omap_vc_post_scale(struct voltagedomain *voltdm, + unsigned long target_volt, + u8 target_vsel, u8 current_vsel) +{ + u32 smps_steps = 0, smps_delay = 0; + + smps_steps = abs(target_vsel - current_vsel); + /* SMPS slew rate / step size. 2us added as buffer. */ + smps_delay = ((smps_steps * voltdm->pmic->step_size) / + voltdm->pmic->slew_rate) + 2; + udelay(smps_delay); +} + +/* vc_bypass_scale - VC bypass method of voltage scaling */ +int omap_vc_bypass_scale(struct voltagedomain *voltdm, + unsigned long target_volt) +{ + struct omap_vc_channel *vc = voltdm->vc; + u32 loop_cnt = 0, retries_cnt = 0; + u32 vc_valid, vc_bypass_val_reg, vc_bypass_value; + u8 target_vsel, current_vsel; + int ret; + + ret = omap_vc_pre_scale(voltdm, target_volt, &target_vsel, ¤t_vsel); + if (ret) + return ret; + + vc_valid = vc->common->valid; + vc_bypass_val_reg = vc->common->bypass_val_reg; + vc_bypass_value = (target_vsel << vc->common->data_shift) | + (vc->volt_reg_addr << vc->common->regaddr_shift) | + (vc->i2c_slave_addr << vc->common->slaveaddr_shift); + + voltdm->write(vc_bypass_value, vc_bypass_val_reg); + voltdm->write(vc_bypass_value | vc_valid, vc_bypass_val_reg); + + vc_bypass_value = voltdm->read(vc_bypass_val_reg); + /* + * Loop till the bypass command is acknowledged from the SMPS. + * NOTE: This is legacy code. The loop count and retry count needs + * to be revisited. + */ + while (!(vc_bypass_value & vc_valid)) { + loop_cnt++; + + if (retries_cnt > 10) { + pr_warning("%s: Retry count exceeded\n", __func__); + return -ETIMEDOUT; + } + + if (loop_cnt > 50) { + retries_cnt++; + loop_cnt = 0; + udelay(10); + } + vc_bypass_value = voltdm->read(vc_bypass_val_reg); + } + + omap_vc_post_scale(voltdm, target_volt, target_vsel, current_vsel); + return 0; +} + +static void __init omap3_vfsm_init(struct voltagedomain *voltdm) +{ + /* + * Voltage Manager FSM parameters init + * XXX This data should be passed in from the board file + */ + voltdm->write(OMAP3_CLKSETUP, OMAP3_PRM_CLKSETUP_OFFSET); + voltdm->write(OMAP3_VOLTOFFSET, OMAP3_PRM_VOLTOFFSET_OFFSET); + voltdm->write(OMAP3_VOLTSETUP2, OMAP3_PRM_VOLTSETUP2_OFFSET); +} + +static void __init omap3_vc_init_channel(struct voltagedomain *voltdm) +{ + static bool is_initialized; + + if (is_initialized) + return; + + omap3_vfsm_init(voltdm); + + is_initialized = true; +} + + +/* OMAP4 specific voltage init functions */ +static void __init omap4_vc_init_channel(struct voltagedomain *voltdm) +{ + static bool is_initialized; + u32 vc_val; + + if (is_initialized) + return; + + /* XXX These are magic numbers and do not belong! */ + vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT); + voltdm->write(vc_val, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET); + + is_initialized = true; +} + +/** + * omap_vc_i2c_init - initialize I2C interface to PMIC + * @voltdm: voltage domain containing VC data + * + * Use PMIC supplied seetings for I2C high-speed mode and + * master code (if set) and program the VC I2C configuration + * register. + * + * The VC I2C configuration is common to all VC channels, + * so this function only configures I2C for the first VC + * channel registers. All other VC channels will use the + * same configuration. + */ +static void __init omap_vc_i2c_init(struct voltagedomain *voltdm) +{ + struct omap_vc_channel *vc = voltdm->vc; + static bool initialized; + static bool i2c_high_speed; + u8 mcode; + + if (initialized) { + if (voltdm->pmic->i2c_high_speed != i2c_high_speed) + pr_warn("%s: I2C config for all channels must match.", + __func__); + return; + } + + i2c_high_speed = voltdm->pmic->i2c_high_speed; + if (i2c_high_speed) + voltdm->rmw(vc->common->i2c_cfg_hsen_mask, + vc->common->i2c_cfg_hsen_mask, + vc->common->i2c_cfg_reg); + + mcode = voltdm->pmic->i2c_mcode; + if (mcode) + voltdm->rmw(vc->common->i2c_mcode_mask, + mcode << __ffs(vc->common->i2c_mcode_mask), + vc->common->i2c_cfg_reg); + + initialized = true; +} + +void __init omap_vc_init_channel(struct voltagedomain *voltdm) +{ + struct omap_vc_channel *vc = voltdm->vc; + u8 on_vsel, onlp_vsel, ret_vsel, off_vsel; + u32 val; + + if (!voltdm->pmic || !voltdm->pmic->uv_to_vsel) { + pr_err("%s: PMIC info requried to configure vc for" + "vdd_%s not populated.Hence cannot initialize vc\n", + __func__, voltdm->name); + return; + } + + if (!voltdm->read || !voltdm->write) { + pr_err("%s: No read/write API for accessing vdd_%s regs\n", + __func__, voltdm->name); + return; + } + + vc->cfg_channel = 0; + if (vc->flags & OMAP_VC_CHANNEL_CFG_MUTANT) + vc_cfg_bits = &vc_mutant_channel_cfg; + else + vc_cfg_bits = &vc_default_channel_cfg; + + /* get PMIC/board specific settings */ + vc->i2c_slave_addr = voltdm->pmic->i2c_slave_addr; + vc->volt_reg_addr = voltdm->pmic->volt_reg_addr; + vc->cmd_reg_addr = voltdm->pmic->cmd_reg_addr; + vc->setup_time = voltdm->pmic->volt_setup_time; + + /* Configure the i2c slave address for this VC */ + voltdm->rmw(vc->smps_sa_mask, + vc->i2c_slave_addr << __ffs(vc->smps_sa_mask), + vc->smps_sa_reg); + vc->cfg_channel |= vc_cfg_bits->sa; + + /* + * Configure the PMIC register addresses. + */ + voltdm->rmw(vc->smps_volra_mask, + vc->volt_reg_addr << __ffs(vc->smps_volra_mask), + vc->smps_volra_reg); + vc->cfg_channel |= vc_cfg_bits->rav; + + if (vc->cmd_reg_addr) { + voltdm->rmw(vc->smps_cmdra_mask, + vc->cmd_reg_addr << __ffs(vc->smps_cmdra_mask), + vc->smps_cmdra_reg); + vc->cfg_channel |= vc_cfg_bits->rac | vc_cfg_bits->racen; + } + + /* Set up the on, inactive, retention and off voltage */ + on_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->on_volt); + onlp_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->onlp_volt); + ret_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->ret_volt); + off_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->off_volt); + val = ((on_vsel << vc->common->cmd_on_shift) | + (onlp_vsel << vc->common->cmd_onlp_shift) | + (ret_vsel << vc->common->cmd_ret_shift) | + (off_vsel << vc->common->cmd_off_shift)); + voltdm->write(val, vc->cmdval_reg); + vc->cfg_channel |= vc_cfg_bits->cmd; + + /* Channel configuration */ + omap_vc_config_channel(voltdm); + + /* Configure the setup times */ + voltdm->rmw(voltdm->vfsm->voltsetup_mask, + vc->setup_time << __ffs(voltdm->vfsm->voltsetup_mask), + voltdm->vfsm->voltsetup_reg); + + omap_vc_i2c_init(voltdm); + + if (cpu_is_omap34xx()) + omap3_vc_init_channel(voltdm); + else if (cpu_is_omap44xx()) + omap4_vc_init_channel(voltdm); +} + diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h index e7767771de4..478bf6b432c 100644 --- a/arch/arm/mach-omap2/vc.h +++ b/arch/arm/mach-omap2/vc.h @@ -19,12 +19,12 @@ #include <linux/kernel.h> +struct voltagedomain; + /** - * struct omap_vc_common_data - per-VC register/bitfield data + * struct omap_vc_common - per-VC register/bitfield data * @cmd_on_mask: ON bitmask in PRM_VC_CMD_VAL* register * @valid: VALID bitmask in PRM_VC_BYPASS_VAL register - * @smps_sa_reg: Offset of PRM_VC_SMPS_SA reg from PRM start - * @smps_volra_reg: Offset of PRM_VC_SMPS_VOL_RA reg from PRM start * @bypass_val_reg: Offset of PRM_VC_BYPASS_VAL reg from PRM start * @data_shift: DATA field shift in PRM_VC_BYPASS_VAL register * @slaveaddr_shift: SLAVEADDR field shift in PRM_VC_BYPASS_VAL register @@ -33,15 +33,16 @@ * @cmd_onlp_shift: ONLP field shift in PRM_VC_CMD_VAL_* register * @cmd_ret_shift: RET field shift in PRM_VC_CMD_VAL_* register * @cmd_off_shift: OFF field shift in PRM_VC_CMD_VAL_* register + * @i2c_cfg_reg: I2C configuration register offset + * @i2c_cfg_hsen_mask: high-speed mode bit field mask in I2C config register + * @i2c_mcode_mask: MCODE field mask for I2C config register * * XXX One of cmd_on_mask and cmd_on_shift are not needed * XXX VALID should probably be a shift, not a mask */ -struct omap_vc_common_data { +struct omap_vc_common { u32 cmd_on_mask; u32 valid; - u8 smps_sa_reg; - u8 smps_volra_reg; u8 bypass_val_reg; u8 data_shift; u8 slaveaddr_shift; @@ -50,34 +51,75 @@ struct omap_vc_common_data { u8 cmd_onlp_shift; u8 cmd_ret_shift; u8 cmd_off_shift; + u8 i2c_cfg_reg; + u8 i2c_cfg_hsen_mask; + u8 i2c_mcode_mask; }; +/* omap_vc_channel.flags values */ +#define OMAP_VC_CHANNEL_DEFAULT BIT(0) +#define OMAP_VC_CHANNEL_CFG_MUTANT BIT(1) + /** - * struct omap_vc_instance_data - VC per-instance data - * @vc_common: pointer to VC common data for this platform - * @smps_sa_mask: SA* bitmask in the PRM_VC_SMPS_SA register - * @smps_volra_mask: VOLRA* bitmask in the PRM_VC_VOL_RA register - * @smps_sa_shift: SA* field shift in the PRM_VC_SMPS_SA register - * @smps_volra_shift: VOLRA* field shift in the PRM_VC_VOL_RA register + * struct omap_vc_channel - VC per-instance data + * @i2c_slave_addr: I2C slave address of PMIC for this VC channel + * @volt_reg_addr: voltage configuration register address + * @cmd_reg_addr: command configuration register address + * @setup_time: setup time (in sys_clk cycles) of regulator for this channel + * @cfg_channel: current value of VC channel configuration register + * @i2c_high_speed: whether or not to use I2C high-speed mode * - * XXX It is not necessary to have both a *_mask and a *_shift - - * remove one + * @common: pointer to VC common data for this platform + * @smps_sa_mask: i2c slave address bitmask in the PRM_VC_SMPS_SA register + * @smps_volra_mask: VOLRA* bitmask in the PRM_VC_VOL_RA register + * @smps_cmdra_mask: CMDRA* bitmask in the PRM_VC_CMD_RA register + * @cmdval_reg: register for on/ret/off voltage level values for this channel + * @smps_sa_reg: Offset of PRM_VC_SMPS_SA reg from PRM start + * @smps_volra_reg: Offset of PRM_VC_SMPS_VOL_RA reg from PRM start + * @smps_cmdra_reg: Offset of PRM_VC_SMPS_CMD_RA reg from PRM start + * @cfg_channel_reg: VC channel configuration register + * @cfg_channel_sa_shift: bit shift for slave address cfg_channel register + * @flags: VC channel-specific flags (optional) */ -struct omap_vc_instance_data { - const struct omap_vc_common_data *vc_common; +struct omap_vc_channel { + /* channel state */ + u16 i2c_slave_addr; + u16 volt_reg_addr; + u16 cmd_reg_addr; + u16 setup_time; + u8 cfg_channel; + bool i2c_high_speed; + + /* register access data */ + const struct omap_vc_common *common; u32 smps_sa_mask; u32 smps_volra_mask; + u32 smps_cmdra_mask; u8 cmdval_reg; - u8 smps_sa_shift; - u8 smps_volra_shift; + u8 smps_sa_reg; + u8 smps_volra_reg; + u8 smps_cmdra_reg; + u8 cfg_channel_reg; + u8 cfg_channel_sa_shift; + u8 flags; }; -extern struct omap_vc_instance_data omap3_vc1_data; -extern struct omap_vc_instance_data omap3_vc2_data; +extern struct omap_vc_channel omap3_vc_mpu; +extern struct omap_vc_channel omap3_vc_core; + +extern struct omap_vc_channel omap4_vc_mpu; +extern struct omap_vc_channel omap4_vc_iva; +extern struct omap_vc_channel omap4_vc_core; -extern struct omap_vc_instance_data omap4_vc_mpu_data; -extern struct omap_vc_instance_data omap4_vc_iva_data; -extern struct omap_vc_instance_data omap4_vc_core_data; +void omap_vc_init_channel(struct voltagedomain *voltdm); +int omap_vc_pre_scale(struct voltagedomain *voltdm, + unsigned long target_volt, + u8 *target_vsel, u8 *current_vsel); +void omap_vc_post_scale(struct voltagedomain *voltdm, + unsigned long target_volt, + u8 target_vsel, u8 current_vsel); +int omap_vc_bypass_scale(struct voltagedomain *voltdm, + unsigned long target_volt); #endif diff --git a/arch/arm/mach-omap2/vc3xxx_data.c b/arch/arm/mach-omap2/vc3xxx_data.c index f37dc4bc379..cfe348e1af0 100644 --- a/arch/arm/mach-omap2/vc3xxx_data.c +++ b/arch/arm/mach-omap2/vc3xxx_data.c @@ -29,9 +29,7 @@ * VC data common to 34xx/36xx chips * XXX This stuff presumably belongs in the vc3xxx.c or vc.c file. */ -static struct omap_vc_common_data omap3_vc_common = { - .smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET, - .smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET, +static struct omap_vc_common omap3_vc_common = { .bypass_val_reg = OMAP3_PRM_VC_BYPASS_VAL_OFFSET, .data_shift = OMAP3430_DATA_SHIFT, .slaveaddr_shift = OMAP3430_SLAVEADDR_SHIFT, @@ -42,22 +40,33 @@ static struct omap_vc_common_data omap3_vc_common = { .cmd_onlp_shift = OMAP3430_VC_CMD_ONLP_SHIFT, .cmd_ret_shift = OMAP3430_VC_CMD_RET_SHIFT, .cmd_off_shift = OMAP3430_VC_CMD_OFF_SHIFT, + .i2c_cfg_hsen_mask = OMAP3430_HSEN_MASK, + .i2c_cfg_reg = OMAP3_PRM_VC_I2C_CFG_OFFSET, + .i2c_mcode_mask = OMAP3430_MCODE_MASK, }; -struct omap_vc_instance_data omap3_vc1_data = { - .vc_common = &omap3_vc_common, +struct omap_vc_channel omap3_vc_mpu = { + .common = &omap3_vc_common, + .smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET, + .smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET, + .smps_cmdra_reg = OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET, + .cfg_channel_reg = OMAP3_PRM_VC_CH_CONF_OFFSET, .cmdval_reg = OMAP3_PRM_VC_CMD_VAL_0_OFFSET, - .smps_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT, .smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA0_MASK, - .smps_volra_shift = OMAP3430_VOLRA0_SHIFT, .smps_volra_mask = OMAP3430_VOLRA0_MASK, + .smps_cmdra_mask = OMAP3430_CMDRA0_MASK, + .cfg_channel_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT, }; -struct omap_vc_instance_data omap3_vc2_data = { - .vc_common = &omap3_vc_common, +struct omap_vc_channel omap3_vc_core = { + .common = &omap3_vc_common, + .smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET, + .smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET, + .smps_cmdra_reg = OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET, + .cfg_channel_reg = OMAP3_PRM_VC_CH_CONF_OFFSET, .cmdval_reg = OMAP3_PRM_VC_CMD_VAL_1_OFFSET, - .smps_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT, .smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA1_MASK, - .smps_volra_shift = OMAP3430_VOLRA1_SHIFT, .smps_volra_mask = OMAP3430_VOLRA1_MASK, + .smps_cmdra_mask = OMAP3430_CMDRA1_MASK, + .cfg_channel_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT, }; diff --git a/arch/arm/mach-omap2/vc44xx_data.c b/arch/arm/mach-omap2/vc44xx_data.c index a98da8ddec5..2740a968145 100644 --- a/arch/arm/mach-omap2/vc44xx_data.c +++ b/arch/arm/mach-omap2/vc44xx_data.c @@ -30,9 +30,7 @@ * VC data common to 44xx chips * XXX This stuff presumably belongs in the vc3xxx.c or vc.c file. */ -static const struct omap_vc_common_data omap4_vc_common = { - .smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET, - .smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET, +static const struct omap_vc_common omap4_vc_common = { .bypass_val_reg = OMAP4_PRM_VC_VAL_BYPASS_OFFSET, .data_shift = OMAP4430_DATA_SHIFT, .slaveaddr_shift = OMAP4430_SLAVEADDR_SHIFT, @@ -43,33 +41,49 @@ static const struct omap_vc_common_data omap4_vc_common = { .cmd_onlp_shift = OMAP4430_ONLP_SHIFT, .cmd_ret_shift = OMAP4430_RET_SHIFT, .cmd_off_shift = OMAP4430_OFF_SHIFT, + .i2c_cfg_reg = OMAP4_PRM_VC_CFG_I2C_MODE_OFFSET, + .i2c_cfg_hsen_mask = OMAP4430_HSMODEEN_MASK, + .i2c_mcode_mask = OMAP4430_HSMCODE_MASK, }; /* VC instance data for each controllable voltage line */ -struct omap_vc_instance_data omap4_vc_mpu_data = { - .vc_common = &omap4_vc_common, +struct omap_vc_channel omap4_vc_mpu = { + .flags = OMAP_VC_CHANNEL_DEFAULT | OMAP_VC_CHANNEL_CFG_MUTANT, + .common = &omap4_vc_common, + .smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET, + .smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET, + .smps_cmdra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_CMD_OFFSET, + .cfg_channel_reg = OMAP4_PRM_VC_CFG_CHANNEL_OFFSET, .cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_MPU_L_OFFSET, - .smps_sa_shift = OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_SHIFT, .smps_sa_mask = OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK, - .smps_volra_shift = OMAP4430_VOLRA_VDD_MPU_L_SHIFT, .smps_volra_mask = OMAP4430_VOLRA_VDD_MPU_L_MASK, + .smps_cmdra_mask = OMAP4430_CMDRA_VDD_MPU_L_MASK, + .cfg_channel_sa_shift = OMAP4430_SA_VDD_MPU_L_SHIFT, }; -struct omap_vc_instance_data omap4_vc_iva_data = { - .vc_common = &omap4_vc_common, +struct omap_vc_channel omap4_vc_iva = { + .common = &omap4_vc_common, + .smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET, + .smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET, + .smps_cmdra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_CMD_OFFSET, + .cfg_channel_reg = OMAP4_PRM_VC_CFG_CHANNEL_OFFSET, .cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_IVA_L_OFFSET, - .smps_sa_shift = OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_SHIFT, .smps_sa_mask = OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK, - .smps_volra_shift = OMAP4430_VOLRA_VDD_IVA_L_SHIFT, .smps_volra_mask = OMAP4430_VOLRA_VDD_IVA_L_MASK, + .smps_cmdra_mask = OMAP4430_CMDRA_VDD_IVA_L_MASK, + .cfg_channel_sa_shift = OMAP4430_SA_VDD_IVA_L_SHIFT, }; -struct omap_vc_instance_data omap4_vc_core_data = { - .vc_common = &omap4_vc_common, +struct omap_vc_channel omap4_vc_core = { + .common = &omap4_vc_common, + .smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET, + .smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET, + .smps_cmdra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_CMD_OFFSET, + .cfg_channel_reg = OMAP4_PRM_VC_CFG_CHANNEL_OFFSET, .cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_CORE_L_OFFSET, - .smps_sa_shift = OMAP4430_SA_VDD_CORE_L_0_6_SHIFT, .smps_sa_mask = OMAP4430_SA_VDD_CORE_L_0_6_MASK, - .smps_volra_shift = OMAP4430_VOLRA_VDD_CORE_L_SHIFT, .smps_volra_mask = OMAP4430_VOLRA_VDD_CORE_L_MASK, + .smps_cmdra_mask = OMAP4430_CMDRA_VDD_CORE_L_MASK, + .cfg_channel_sa_shift = OMAP4430_SA_VDD_CORE_L_SHIFT, }; diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 9ef3789ded4..64070ac1e76 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -21,10 +21,10 @@ #include <linux/delay.h> #include <linux/io.h> -#include <linux/clk.h> #include <linux/err.h> #include <linux/debugfs.h> #include <linux/slab.h> +#include <linux/clk.h> #include <plat/common.h> @@ -36,839 +36,88 @@ #include "control.h" #include "voltage.h" +#include "powerdomain.h" #include "vc.h" #include "vp.h" -#define VOLTAGE_DIR_SIZE 16 - - -static struct omap_vdd_info **vdd_info; - -/* - * Number of scalable voltage domains. - */ -static int nr_scalable_vdd; - -/* XXX document */ -static s16 prm_mod_offs; -static s16 prm_irqst_ocp_mod_offs; - -static struct dentry *voltage_dir; - -/* Init function pointers */ -static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd, - unsigned long target_volt); - -static u32 omap3_voltage_read_reg(u16 mod, u8 offset) -{ - return omap2_prm_read_mod_reg(mod, offset); -} - -static void omap3_voltage_write_reg(u32 val, u16 mod, u8 offset) -{ - omap2_prm_write_mod_reg(val, mod, offset); -} - -static u32 omap4_voltage_read_reg(u16 mod, u8 offset) -{ - return omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION, - mod, offset); -} - -static void omap4_voltage_write_reg(u32 val, u16 mod, u8 offset) -{ - omap4_prminst_write_inst_reg(val, OMAP4430_PRM_PARTITION, mod, offset); -} - -static int __init _config_common_vdd_data(struct omap_vdd_info *vdd) -{ - char *sys_ck_name; - struct clk *sys_ck; - u32 sys_clk_speed, timeout_val, waittime; - - /* - * XXX Clockfw should handle this, or this should be in a - * struct record - */ - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - sys_ck_name = "sys_ck"; - else if (cpu_is_omap44xx()) - sys_ck_name = "sys_clkin_ck"; - else - return -EINVAL; - - /* - * Sys clk rate is require to calculate vp timeout value and - * smpswaittimemin and smpswaittimemax. - */ - sys_ck = clk_get(NULL, sys_ck_name); - if (IS_ERR(sys_ck)) { - pr_warning("%s: Could not get the sys clk to calculate" - "various vdd_%s params\n", __func__, vdd->voltdm.name); - return -EINVAL; - } - sys_clk_speed = clk_get_rate(sys_ck); - clk_put(sys_ck); - /* Divide to avoid overflow */ - sys_clk_speed /= 1000; - - /* Generic voltage parameters */ - vdd->volt_scale = vp_forceupdate_scale_voltage; - vdd->vp_enabled = false; - - vdd->vp_rt_data.vpconfig_erroroffset = - (vdd->pmic_info->vp_erroroffset << - vdd->vp_data->vp_common->vpconfig_erroroffset_shift); - - timeout_val = (sys_clk_speed * vdd->pmic_info->vp_timeout_us) / 1000; - vdd->vp_rt_data.vlimitto_timeout = timeout_val; - vdd->vp_rt_data.vlimitto_vddmin = vdd->pmic_info->vp_vddmin; - vdd->vp_rt_data.vlimitto_vddmax = vdd->pmic_info->vp_vddmax; - - waittime = ((vdd->pmic_info->step_size / vdd->pmic_info->slew_rate) * - sys_clk_speed) / 1000; - vdd->vp_rt_data.vstepmin_smpswaittimemin = waittime; - vdd->vp_rt_data.vstepmax_smpswaittimemax = waittime; - vdd->vp_rt_data.vstepmin_stepmin = vdd->pmic_info->vp_vstepmin; - vdd->vp_rt_data.vstepmax_stepmax = vdd->pmic_info->vp_vstepmax; - - return 0; -} - -/* Voltage debugfs support */ -static int vp_volt_debug_get(void *data, u64 *val) -{ - struct omap_vdd_info *vdd = (struct omap_vdd_info *) data; - u8 vsel; - - if (!vdd) { - pr_warning("Wrong paramater passed\n"); - return -EINVAL; - } - - vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage); - - if (!vdd->pmic_info->vsel_to_uv) { - pr_warning("PMIC function to convert vsel to voltage" - "in uV not registerd\n"); - return -EINVAL; - } - - *val = vdd->pmic_info->vsel_to_uv(vsel); - return 0; -} - -static int nom_volt_debug_get(void *data, u64 *val) -{ - struct omap_vdd_info *vdd = (struct omap_vdd_info *) data; - - if (!vdd) { - pr_warning("Wrong paramater passed\n"); - return -EINVAL; - } - - *val = omap_voltage_get_nom_volt(&vdd->voltdm); - - return 0; -} - -DEFINE_SIMPLE_ATTRIBUTE(vp_volt_debug_fops, vp_volt_debug_get, NULL, "%llu\n"); -DEFINE_SIMPLE_ATTRIBUTE(nom_volt_debug_fops, nom_volt_debug_get, NULL, - "%llu\n"); -static void vp_latch_vsel(struct omap_vdd_info *vdd) -{ - u32 vpconfig; - unsigned long uvdc; - char vsel; - - uvdc = omap_voltage_get_nom_volt(&vdd->voltdm); - if (!uvdc) { - pr_warning("%s: unable to find current voltage for vdd_%s\n", - __func__, vdd->voltdm.name); - return; - } - - if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) { - pr_warning("%s: PMIC function to convert voltage in uV to" - " vsel not registered\n", __func__); - return; - } - - vsel = vdd->pmic_info->uv_to_vsel(uvdc); - - vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig); - vpconfig &= ~(vdd->vp_data->vp_common->vpconfig_initvoltage_mask | - vdd->vp_data->vp_common->vpconfig_initvdd); - vpconfig |= vsel << vdd->vp_data->vp_common->vpconfig_initvoltage_shift; - - vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); - - /* Trigger initVDD value copy to voltage processor */ - vdd->write_reg((vpconfig | vdd->vp_data->vp_common->vpconfig_initvdd), - prm_mod_offs, vdd->vp_data->vpconfig); - - /* Clear initVDD copy trigger bit */ - vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); -} - -/* Generic voltage init functions */ -static void __init vp_init(struct omap_vdd_info *vdd) -{ - u32 vp_val; - - if (!vdd->read_reg || !vdd->write_reg) { - pr_err("%s: No read/write API for accessing vdd_%s regs\n", - __func__, vdd->voltdm.name); - return; - } - - vp_val = vdd->vp_rt_data.vpconfig_erroroffset | - (vdd->vp_rt_data.vpconfig_errorgain << - vdd->vp_data->vp_common->vpconfig_errorgain_shift) | - vdd->vp_data->vp_common->vpconfig_timeouten; - vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vpconfig); - - vp_val = ((vdd->vp_rt_data.vstepmin_smpswaittimemin << - vdd->vp_data->vp_common->vstepmin_smpswaittimemin_shift) | - (vdd->vp_rt_data.vstepmin_stepmin << - vdd->vp_data->vp_common->vstepmin_stepmin_shift)); - vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vstepmin); - - vp_val = ((vdd->vp_rt_data.vstepmax_smpswaittimemax << - vdd->vp_data->vp_common->vstepmax_smpswaittimemax_shift) | - (vdd->vp_rt_data.vstepmax_stepmax << - vdd->vp_data->vp_common->vstepmax_stepmax_shift)); - vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vstepmax); - - vp_val = ((vdd->vp_rt_data.vlimitto_vddmax << - vdd->vp_data->vp_common->vlimitto_vddmax_shift) | - (vdd->vp_rt_data.vlimitto_vddmin << - vdd->vp_data->vp_common->vlimitto_vddmin_shift) | - (vdd->vp_rt_data.vlimitto_timeout << - vdd->vp_data->vp_common->vlimitto_timeout_shift)); - vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vlimitto); -} - -static void __init vdd_debugfs_init(struct omap_vdd_info *vdd) -{ - char *name; - - name = kzalloc(VOLTAGE_DIR_SIZE, GFP_KERNEL); - if (!name) { - pr_warning("%s: Unable to allocate memory for debugfs" - " directory name for vdd_%s", - __func__, vdd->voltdm.name); - return; - } - strcpy(name, "vdd_"); - strcat(name, vdd->voltdm.name); - - vdd->debug_dir = debugfs_create_dir(name, voltage_dir); - kfree(name); - if (IS_ERR(vdd->debug_dir)) { - pr_warning("%s: Unable to create debugfs directory for" - " vdd_%s\n", __func__, vdd->voltdm.name); - vdd->debug_dir = NULL; - return; - } - - (void) debugfs_create_x16("vp_errorgain", S_IRUGO, vdd->debug_dir, - &(vdd->vp_rt_data.vpconfig_errorgain)); - (void) debugfs_create_x16("vp_smpswaittimemin", S_IRUGO, - vdd->debug_dir, - &(vdd->vp_rt_data.vstepmin_smpswaittimemin)); - (void) debugfs_create_x8("vp_stepmin", S_IRUGO, vdd->debug_dir, - &(vdd->vp_rt_data.vstepmin_stepmin)); - (void) debugfs_create_x16("vp_smpswaittimemax", S_IRUGO, - vdd->debug_dir, - &(vdd->vp_rt_data.vstepmax_smpswaittimemax)); - (void) debugfs_create_x8("vp_stepmax", S_IRUGO, vdd->debug_dir, - &(vdd->vp_rt_data.vstepmax_stepmax)); - (void) debugfs_create_x8("vp_vddmax", S_IRUGO, vdd->debug_dir, - &(vdd->vp_rt_data.vlimitto_vddmax)); - (void) debugfs_create_x8("vp_vddmin", S_IRUGO, vdd->debug_dir, - &(vdd->vp_rt_data.vlimitto_vddmin)); - (void) debugfs_create_x16("vp_timeout", S_IRUGO, vdd->debug_dir, - &(vdd->vp_rt_data.vlimitto_timeout)); - (void) debugfs_create_file("curr_vp_volt", S_IRUGO, vdd->debug_dir, - (void *) vdd, &vp_volt_debug_fops); - (void) debugfs_create_file("curr_nominal_volt", S_IRUGO, - vdd->debug_dir, (void *) vdd, - &nom_volt_debug_fops); -} - -/* Voltage scale and accessory APIs */ -static int _pre_volt_scale(struct omap_vdd_info *vdd, - unsigned long target_volt, u8 *target_vsel, u8 *current_vsel) -{ - struct omap_volt_data *volt_data; - const struct omap_vc_common_data *vc_common; - const struct omap_vp_common_data *vp_common; - u32 vc_cmdval, vp_errgain_val; - - vc_common = vdd->vc_data->vc_common; - vp_common = vdd->vp_data->vp_common; - - /* Check if suffiecient pmic info is available for this vdd */ - if (!vdd->pmic_info) { - pr_err("%s: Insufficient pmic info to scale the vdd_%s\n", - __func__, vdd->voltdm.name); - return -EINVAL; - } - - if (!vdd->pmic_info->uv_to_vsel) { - pr_err("%s: PMIC function to convert voltage in uV to" - "vsel not registered. Hence unable to scale voltage" - "for vdd_%s\n", __func__, vdd->voltdm.name); - return -ENODATA; - } - - if (!vdd->read_reg || !vdd->write_reg) { - pr_err("%s: No read/write API for accessing vdd_%s regs\n", - __func__, vdd->voltdm.name); - return -EINVAL; - } - - /* Get volt_data corresponding to target_volt */ - volt_data = omap_voltage_get_voltdata(&vdd->voltdm, target_volt); - if (IS_ERR(volt_data)) - volt_data = NULL; - - *target_vsel = vdd->pmic_info->uv_to_vsel(target_volt); - *current_vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage); - - /* Setting the ON voltage to the new target voltage */ - vc_cmdval = vdd->read_reg(prm_mod_offs, vdd->vc_data->cmdval_reg); - vc_cmdval &= ~vc_common->cmd_on_mask; - vc_cmdval |= (*target_vsel << vc_common->cmd_on_shift); - vdd->write_reg(vc_cmdval, prm_mod_offs, vdd->vc_data->cmdval_reg); - - /* Setting vp errorgain based on the voltage */ - if (volt_data) { - vp_errgain_val = vdd->read_reg(prm_mod_offs, - vdd->vp_data->vpconfig); - vdd->vp_rt_data.vpconfig_errorgain = volt_data->vp_errgain; - vp_errgain_val &= ~vp_common->vpconfig_errorgain_mask; - vp_errgain_val |= vdd->vp_rt_data.vpconfig_errorgain << - vp_common->vpconfig_errorgain_shift; - vdd->write_reg(vp_errgain_val, prm_mod_offs, - vdd->vp_data->vpconfig); - } - - return 0; -} - -static void _post_volt_scale(struct omap_vdd_info *vdd, - unsigned long target_volt, u8 target_vsel, u8 current_vsel) -{ - u32 smps_steps = 0, smps_delay = 0; - - smps_steps = abs(target_vsel - current_vsel); - /* SMPS slew rate / step size. 2us added as buffer. */ - smps_delay = ((smps_steps * vdd->pmic_info->step_size) / - vdd->pmic_info->slew_rate) + 2; - udelay(smps_delay); - - vdd->curr_volt = target_volt; -} - -/* vc_bypass_scale_voltage - VC bypass method of voltage scaling */ -static int vc_bypass_scale_voltage(struct omap_vdd_info *vdd, - unsigned long target_volt) -{ - u32 loop_cnt = 0, retries_cnt = 0; - u32 vc_valid, vc_bypass_val_reg, vc_bypass_value; - u8 target_vsel, current_vsel; - int ret; - - ret = _pre_volt_scale(vdd, target_volt, &target_vsel, ¤t_vsel); - if (ret) - return ret; - - vc_valid = vdd->vc_data->vc_common->valid; - vc_bypass_val_reg = vdd->vc_data->vc_common->bypass_val_reg; - vc_bypass_value = (target_vsel << vdd->vc_data->vc_common->data_shift) | - (vdd->pmic_info->pmic_reg << - vdd->vc_data->vc_common->regaddr_shift) | - (vdd->pmic_info->i2c_slave_addr << - vdd->vc_data->vc_common->slaveaddr_shift); - - vdd->write_reg(vc_bypass_value, prm_mod_offs, vc_bypass_val_reg); - vdd->write_reg(vc_bypass_value | vc_valid, prm_mod_offs, - vc_bypass_val_reg); - - vc_bypass_value = vdd->read_reg(prm_mod_offs, vc_bypass_val_reg); - /* - * Loop till the bypass command is acknowledged from the SMPS. - * NOTE: This is legacy code. The loop count and retry count needs - * to be revisited. - */ - while (!(vc_bypass_value & vc_valid)) { - loop_cnt++; - - if (retries_cnt > 10) { - pr_warning("%s: Retry count exceeded\n", __func__); - return -ETIMEDOUT; - } - - if (loop_cnt > 50) { - retries_cnt++; - loop_cnt = 0; - udelay(10); - } - vc_bypass_value = vdd->read_reg(prm_mod_offs, - vc_bypass_val_reg); - } - - _post_volt_scale(vdd, target_volt, target_vsel, current_vsel); - return 0; -} - -/* VP force update method of voltage scaling */ -static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd, - unsigned long target_volt) -{ - u32 vpconfig; - u8 target_vsel, current_vsel, prm_irqst_reg; - int ret, timeout = 0; - - ret = _pre_volt_scale(vdd, target_volt, &target_vsel, ¤t_vsel); - if (ret) - return ret; - - prm_irqst_reg = vdd->vp_data->prm_irqst_data->prm_irqst_reg; - - /* - * Clear all pending TransactionDone interrupt/status. Typical latency - * is <3us - */ - while (timeout++ < VP_TRANXDONE_TIMEOUT) { - vdd->write_reg(vdd->vp_data->prm_irqst_data->tranxdone_status, - prm_irqst_ocp_mod_offs, prm_irqst_reg); - if (!(vdd->read_reg(prm_irqst_ocp_mod_offs, prm_irqst_reg) & - vdd->vp_data->prm_irqst_data->tranxdone_status)) - break; - udelay(1); - } - if (timeout >= VP_TRANXDONE_TIMEOUT) { - pr_warning("%s: vdd_%s TRANXDONE timeout exceeded." - "Voltage change aborted", __func__, vdd->voltdm.name); - return -ETIMEDOUT; - } - - /* Configure for VP-Force Update */ - vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig); - vpconfig &= ~(vdd->vp_data->vp_common->vpconfig_initvdd | - vdd->vp_data->vp_common->vpconfig_forceupdate | - vdd->vp_data->vp_common->vpconfig_initvoltage_mask); - vpconfig |= ((target_vsel << - vdd->vp_data->vp_common->vpconfig_initvoltage_shift)); - vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); - - /* Trigger initVDD value copy to voltage processor */ - vpconfig |= vdd->vp_data->vp_common->vpconfig_initvdd; - vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); - - /* Force update of voltage */ - vpconfig |= vdd->vp_data->vp_common->vpconfig_forceupdate; - vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); - - /* - * Wait for TransactionDone. Typical latency is <200us. - * Depends on SMPSWAITTIMEMIN/MAX and voltage change - */ - timeout = 0; - omap_test_timeout((vdd->read_reg(prm_irqst_ocp_mod_offs, prm_irqst_reg) & - vdd->vp_data->prm_irqst_data->tranxdone_status), - VP_TRANXDONE_TIMEOUT, timeout); - if (timeout >= VP_TRANXDONE_TIMEOUT) - pr_err("%s: vdd_%s TRANXDONE timeout exceeded." - "TRANXDONE never got set after the voltage update\n", - __func__, vdd->voltdm.name); - - _post_volt_scale(vdd, target_volt, target_vsel, current_vsel); - - /* - * Disable TransactionDone interrupt , clear all status, clear - * control registers - */ - timeout = 0; - while (timeout++ < VP_TRANXDONE_TIMEOUT) { - vdd->write_reg(vdd->vp_data->prm_irqst_data->tranxdone_status, - prm_irqst_ocp_mod_offs, prm_irqst_reg); - if (!(vdd->read_reg(prm_irqst_ocp_mod_offs, prm_irqst_reg) & - vdd->vp_data->prm_irqst_data->tranxdone_status)) - break; - udelay(1); - } - - if (timeout >= VP_TRANXDONE_TIMEOUT) - pr_warning("%s: vdd_%s TRANXDONE timeout exceeded while trying" - "to clear the TRANXDONE status\n", - __func__, vdd->voltdm.name); - - vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig); - /* Clear initVDD copy trigger bit */ - vpconfig &= ~vdd->vp_data->vp_common->vpconfig_initvdd; - vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); - /* Clear force bit */ - vpconfig &= ~vdd->vp_data->vp_common->vpconfig_forceupdate; - vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); - - return 0; -} - -static void __init omap3_vfsm_init(struct omap_vdd_info *vdd) -{ - /* - * Voltage Manager FSM parameters init - * XXX This data should be passed in from the board file - */ - vdd->write_reg(OMAP3_CLKSETUP, prm_mod_offs, OMAP3_PRM_CLKSETUP_OFFSET); - vdd->write_reg(OMAP3_VOLTOFFSET, prm_mod_offs, - OMAP3_PRM_VOLTOFFSET_OFFSET); - vdd->write_reg(OMAP3_VOLTSETUP2, prm_mod_offs, - OMAP3_PRM_VOLTSETUP2_OFFSET); -} - -static void __init omap3_vc_init(struct omap_vdd_info *vdd) -{ - static bool is_initialized; - u8 on_vsel, onlp_vsel, ret_vsel, off_vsel; - u32 vc_val; - - if (is_initialized) - return; - - /* Set up the on, inactive, retention and off voltage */ - on_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->on_volt); - onlp_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->onlp_volt); - ret_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->ret_volt); - off_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->off_volt); - vc_val = ((on_vsel << vdd->vc_data->vc_common->cmd_on_shift) | - (onlp_vsel << vdd->vc_data->vc_common->cmd_onlp_shift) | - (ret_vsel << vdd->vc_data->vc_common->cmd_ret_shift) | - (off_vsel << vdd->vc_data->vc_common->cmd_off_shift)); - vdd->write_reg(vc_val, prm_mod_offs, vdd->vc_data->cmdval_reg); - - /* - * Generic VC parameters init - * XXX This data should be abstracted out - */ - vdd->write_reg(OMAP3430_CMD1_MASK | OMAP3430_RAV1_MASK, prm_mod_offs, - OMAP3_PRM_VC_CH_CONF_OFFSET); - vdd->write_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, prm_mod_offs, - OMAP3_PRM_VC_I2C_CFG_OFFSET); - - omap3_vfsm_init(vdd); - - is_initialized = true; -} - - -/* OMAP4 specific voltage init functions */ -static void __init omap4_vc_init(struct omap_vdd_info *vdd) -{ - static bool is_initialized; - u32 vc_val; - - if (is_initialized) - return; - - /* TODO: Configure setup times and CMD_VAL values*/ - - /* - * Generic VC parameters init - * XXX This data should be abstracted out - */ - vc_val = (OMAP4430_RAV_VDD_MPU_L_MASK | OMAP4430_CMD_VDD_MPU_L_MASK | - OMAP4430_RAV_VDD_IVA_L_MASK | OMAP4430_CMD_VDD_IVA_L_MASK | - OMAP4430_RAV_VDD_CORE_L_MASK | OMAP4430_CMD_VDD_CORE_L_MASK); - vdd->write_reg(vc_val, prm_mod_offs, OMAP4_PRM_VC_CFG_CHANNEL_OFFSET); - - /* XXX These are magic numbers and do not belong! */ - vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT); - vdd->write_reg(vc_val, prm_mod_offs, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET); - - is_initialized = true; -} - -static void __init omap_vc_init(struct omap_vdd_info *vdd) -{ - u32 vc_val; - - if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) { - pr_err("%s: PMIC info requried to configure vc for" - "vdd_%s not populated.Hence cannot initialize vc\n", - __func__, vdd->voltdm.name); - return; - } - - if (!vdd->read_reg || !vdd->write_reg) { - pr_err("%s: No read/write API for accessing vdd_%s regs\n", - __func__, vdd->voltdm.name); - return; - } - - /* Set up the SMPS_SA(i2c slave address in VC */ - vc_val = vdd->read_reg(prm_mod_offs, - vdd->vc_data->vc_common->smps_sa_reg); - vc_val &= ~vdd->vc_data->smps_sa_mask; - vc_val |= vdd->pmic_info->i2c_slave_addr << vdd->vc_data->smps_sa_shift; - vdd->write_reg(vc_val, prm_mod_offs, - vdd->vc_data->vc_common->smps_sa_reg); - - /* Setup the VOLRA(pmic reg addr) in VC */ - vc_val = vdd->read_reg(prm_mod_offs, - vdd->vc_data->vc_common->smps_volra_reg); - vc_val &= ~vdd->vc_data->smps_volra_mask; - vc_val |= vdd->pmic_info->pmic_reg << vdd->vc_data->smps_volra_shift; - vdd->write_reg(vc_val, prm_mod_offs, - vdd->vc_data->vc_common->smps_volra_reg); - - /* Configure the setup times */ - vc_val = vdd->read_reg(prm_mod_offs, vdd->vfsm->voltsetup_reg); - vc_val &= ~vdd->vfsm->voltsetup_mask; - vc_val |= vdd->pmic_info->volt_setup_time << - vdd->vfsm->voltsetup_shift; - vdd->write_reg(vc_val, prm_mod_offs, vdd->vfsm->voltsetup_reg); - - if (cpu_is_omap34xx()) - omap3_vc_init(vdd); - else if (cpu_is_omap44xx()) - omap4_vc_init(vdd); -} - -static int __init omap_vdd_data_configure(struct omap_vdd_info *vdd) -{ - int ret = -EINVAL; - - if (!vdd->pmic_info) { - pr_err("%s: PMIC info requried to configure vdd_%s not" - "populated.Hence cannot initialize vdd_%s\n", - __func__, vdd->voltdm.name, vdd->voltdm.name); - goto ovdc_out; - } - - if (IS_ERR_VALUE(_config_common_vdd_data(vdd))) - goto ovdc_out; - - if (cpu_is_omap34xx()) { - vdd->read_reg = omap3_voltage_read_reg; - vdd->write_reg = omap3_voltage_write_reg; - ret = 0; - } else if (cpu_is_omap44xx()) { - vdd->read_reg = omap4_voltage_read_reg; - vdd->write_reg = omap4_voltage_write_reg; - ret = 0; - } - -ovdc_out: - return ret; -} +static LIST_HEAD(voltdm_list); /* Public functions */ /** - * omap_voltage_get_nom_volt() - Gets the current non-auto-compensated voltage - * @voltdm: pointer to the VDD for which current voltage info is needed + * voltdm_get_voltage() - Gets the current non-auto-compensated voltage + * @voltdm: pointer to the voltdm for which current voltage info is needed * - * API to get the current non-auto-compensated voltage for a VDD. - * Returns 0 in case of error else returns the current voltage for the VDD. + * API to get the current non-auto-compensated voltage for a voltage domain. + * Returns 0 in case of error else returns the current voltage. */ -unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm) +unsigned long voltdm_get_voltage(struct voltagedomain *voltdm) { - struct omap_vdd_info *vdd; - if (!voltdm || IS_ERR(voltdm)) { pr_warning("%s: VDD specified does not exist!\n", __func__); return 0; } - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); - - return vdd->curr_volt; + return voltdm->nominal_volt; } /** - * omap_vp_get_curr_volt() - API to get the current vp voltage. - * @voltdm: pointer to the VDD. - * - * This API returns the current voltage for the specified voltage processor - */ -unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm) -{ - struct omap_vdd_info *vdd; - u8 curr_vsel; - - if (!voltdm || IS_ERR(voltdm)) { - pr_warning("%s: VDD specified does not exist!\n", __func__); - return 0; - } - - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); - if (!vdd->read_reg) { - pr_err("%s: No read API for reading vdd_%s regs\n", - __func__, voltdm->name); - return 0; - } - - curr_vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage); - - if (!vdd->pmic_info || !vdd->pmic_info->vsel_to_uv) { - pr_warning("%s: PMIC function to convert vsel to voltage" - "in uV not registerd\n", __func__); - return 0; - } - - return vdd->pmic_info->vsel_to_uv(curr_vsel); -} - -/** - * omap_vp_enable() - API to enable a particular VP - * @voltdm: pointer to the VDD whose VP is to be enabled. - * - * This API enables a particular voltage processor. Needed by the smartreflex - * class drivers. - */ -void omap_vp_enable(struct voltagedomain *voltdm) -{ - struct omap_vdd_info *vdd; - u32 vpconfig; - - if (!voltdm || IS_ERR(voltdm)) { - pr_warning("%s: VDD specified does not exist!\n", __func__); - return; - } - - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); - if (!vdd->read_reg || !vdd->write_reg) { - pr_err("%s: No read/write API for accessing vdd_%s regs\n", - __func__, voltdm->name); - return; - } - - /* If VP is already enabled, do nothing. Return */ - if (vdd->vp_enabled) - return; - - vp_latch_vsel(vdd); - - /* Enable VP */ - vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig); - vpconfig |= vdd->vp_data->vp_common->vpconfig_vpenable; - vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); - vdd->vp_enabled = true; -} - -/** - * omap_vp_disable() - API to disable a particular VP - * @voltdm: pointer to the VDD whose VP is to be disabled. - * - * This API disables a particular voltage processor. Needed by the smartreflex - * class drivers. - */ -void omap_vp_disable(struct voltagedomain *voltdm) -{ - struct omap_vdd_info *vdd; - u32 vpconfig; - int timeout; - - if (!voltdm || IS_ERR(voltdm)) { - pr_warning("%s: VDD specified does not exist!\n", __func__); - return; - } - - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); - if (!vdd->read_reg || !vdd->write_reg) { - pr_err("%s: No read/write API for accessing vdd_%s regs\n", - __func__, voltdm->name); - return; - } - - /* If VP is already disabled, do nothing. Return */ - if (!vdd->vp_enabled) { - pr_warning("%s: Trying to disable VP for vdd_%s when" - "it is already disabled\n", __func__, voltdm->name); - return; - } - - /* Disable VP */ - vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig); - vpconfig &= ~vdd->vp_data->vp_common->vpconfig_vpenable; - vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); - - /* - * Wait for VP idle Typical latency is <2us. Maximum latency is ~100us - */ - omap_test_timeout((vdd->read_reg(prm_mod_offs, vdd->vp_data->vstatus)), - VP_IDLE_TIMEOUT, timeout); - - if (timeout >= VP_IDLE_TIMEOUT) - pr_warning("%s: vdd_%s idle timedout\n", - __func__, voltdm->name); - - vdd->vp_enabled = false; - - return; -} - -/** - * omap_voltage_scale_vdd() - API to scale voltage of a particular - * voltage domain. - * @voltdm: pointer to the VDD which is to be scaled. - * @target_volt: The target voltage of the voltage domain + * voltdm_scale() - API to scale voltage of a particular voltage domain. + * @voltdm: pointer to the voltage domain which is to be scaled. + * @target_volt: The target voltage of the voltage domain * * This API should be called by the kernel to do the voltage scaling - * for a particular voltage domain during dvfs or any other situation. + * for a particular voltage domain during DVFS. */ -int omap_voltage_scale_vdd(struct voltagedomain *voltdm, - unsigned long target_volt) +int voltdm_scale(struct voltagedomain *voltdm, + unsigned long target_volt) { - struct omap_vdd_info *vdd; + int ret; if (!voltdm || IS_ERR(voltdm)) { pr_warning("%s: VDD specified does not exist!\n", __func__); return -EINVAL; } - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); - - if (!vdd->volt_scale) { + if (!voltdm->scale) { pr_err("%s: No voltage scale API registered for vdd_%s\n", __func__, voltdm->name); return -ENODATA; } - return vdd->volt_scale(vdd, target_volt); + ret = voltdm->scale(voltdm, target_volt); + if (!ret) + voltdm->nominal_volt = target_volt; + + return ret; } /** - * omap_voltage_reset() - Resets the voltage of a particular voltage domain - * to that of the current OPP. - * @voltdm: pointer to the VDD whose voltage is to be reset. + * voltdm_reset() - Resets the voltage of a particular voltage domain + * to that of the current OPP. + * @voltdm: pointer to the voltage domain whose voltage is to be reset. * * This API finds out the correct voltage the voltage domain is supposed * to be at and resets the voltage to that level. Should be used especially * while disabling any voltage compensation modules. */ -void omap_voltage_reset(struct voltagedomain *voltdm) +void voltdm_reset(struct voltagedomain *voltdm) { - unsigned long target_uvdc; + unsigned long target_volt; if (!voltdm || IS_ERR(voltdm)) { pr_warning("%s: VDD specified does not exist!\n", __func__); return; } - target_uvdc = omap_voltage_get_nom_volt(voltdm); - if (!target_uvdc) { + target_volt = voltdm_get_voltage(voltdm); + if (!target_volt) { pr_err("%s: unable to find current voltage for vdd_%s\n", __func__, voltdm->name); return; } - omap_voltage_scale_vdd(voltdm, target_uvdc); + voltdm_scale(voltdm, target_volt); } /** @@ -884,18 +133,14 @@ void omap_voltage_reset(struct voltagedomain *voltdm) * */ void omap_voltage_get_volttable(struct voltagedomain *voltdm, - struct omap_volt_data **volt_data) + struct omap_volt_data **volt_data) { - struct omap_vdd_info *vdd; - if (!voltdm || IS_ERR(voltdm)) { pr_warning("%s: VDD specified does not exist!\n", __func__); return; } - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); - - *volt_data = vdd->volt_data; + *volt_data = voltdm->volt_data; } /** @@ -914,9 +159,8 @@ void omap_voltage_get_volttable(struct voltagedomain *voltdm, * domain or if there is no matching entry. */ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, - unsigned long volt) + unsigned long volt) { - struct omap_vdd_info *vdd; int i; if (!voltdm || IS_ERR(voltdm)) { @@ -924,17 +168,15 @@ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, return ERR_PTR(-EINVAL); } - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); - - if (!vdd->volt_data) { + if (!voltdm->volt_data) { pr_warning("%s: voltage table does not exist for vdd_%s\n", __func__, voltdm->name); return ERR_PTR(-ENODATA); } - for (i = 0; vdd->volt_data[i].volt_nominal != 0; i++) { - if (vdd->volt_data[i].volt_nominal == volt) - return &vdd->volt_data[i]; + for (i = 0; voltdm->volt_data[i].volt_nominal != 0; i++) { + if (voltdm->volt_data[i].volt_nominal == volt) + return &voltdm->volt_data[i]; } pr_notice("%s: Unable to match the current voltage with the voltage" @@ -947,54 +189,25 @@ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, * omap_voltage_register_pmic() - API to register PMIC specific data * @voltdm: pointer to the VDD for which the PMIC specific data is * to be registered - * @pmic_info: the structure containing pmic info + * @pmic: the structure containing pmic info * * This API is to be called by the SOC/PMIC file to specify the - * pmic specific info as present in omap_volt_pmic_info structure. + * pmic specific info as present in omap_voltdm_pmic structure. */ int omap_voltage_register_pmic(struct voltagedomain *voltdm, - struct omap_volt_pmic_info *pmic_info) + struct omap_voltdm_pmic *pmic) { - struct omap_vdd_info *vdd; - if (!voltdm || IS_ERR(voltdm)) { pr_warning("%s: VDD specified does not exist!\n", __func__); return -EINVAL; } - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); - - vdd->pmic_info = pmic_info; + voltdm->pmic = pmic; return 0; } /** - * omap_voltage_get_dbgdir() - API to get pointer to the debugfs directory - * corresponding to a voltage domain. - * - * @voltdm: pointer to the VDD whose debug directory is required. - * - * This API returns pointer to the debugfs directory corresponding - * to the voltage domain. Should be used by drivers requiring to - * add any debug entry for a particular voltage domain. Returns NULL - * in case of error. - */ -struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm) -{ - struct omap_vdd_info *vdd; - - if (!voltdm || IS_ERR(voltdm)) { - pr_warning("%s: VDD specified does not exist!\n", __func__); - return NULL; - } - - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); - - return vdd->debug_dir; -} - -/** * omap_change_voltscale_method() - API to change the voltage scaling method. * @voltdm: pointer to the VDD whose voltage scaling method * has to be changed. @@ -1005,23 +218,19 @@ struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm) * defined in voltage.h */ void omap_change_voltscale_method(struct voltagedomain *voltdm, - int voltscale_method) + int voltscale_method) { - struct omap_vdd_info *vdd; - if (!voltdm || IS_ERR(voltdm)) { pr_warning("%s: VDD specified does not exist!\n", __func__); return; } - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); - switch (voltscale_method) { case VOLTSCALE_VPFORCEUPDATE: - vdd->volt_scale = vp_forceupdate_scale_voltage; + voltdm->scale = omap_vp_forceupdate_scale; return; case VOLTSCALE_VCBYPASS: - vdd->volt_scale = vc_bypass_scale_voltage; + voltdm->scale = omap_vc_bypass_scale; return; default: pr_warning("%s: Trying to change the method of voltage scaling" @@ -1030,77 +239,192 @@ void omap_change_voltscale_method(struct voltagedomain *voltdm, } /** - * omap_voltage_domain_lookup() - API to get the voltage domain pointer - * @name: Name of the voltage domain + * omap_voltage_late_init() - Init the various voltage parameters * - * This API looks up in the global vdd_info struct for the - * existence of voltage domain <name>. If it exists, the API returns - * a pointer to the voltage domain structure corresponding to the - * VDD<name>. Else retuns error pointer. + * This API is to be called in the later stages of the + * system boot to init the voltage controller and + * voltage processors. */ -struct voltagedomain *omap_voltage_domain_lookup(char *name) +int __init omap_voltage_late_init(void) { - int i; + struct voltagedomain *voltdm; - if (!vdd_info) { - pr_err("%s: Voltage driver init not yet happened.Faulting!\n", + if (list_empty(&voltdm_list)) { + pr_err("%s: Voltage driver support not added\n", __func__); - return ERR_PTR(-EINVAL); + return -EINVAL; } - if (!name) { - pr_err("%s: No name to get the votage domain!\n", __func__); - return ERR_PTR(-EINVAL); + list_for_each_entry(voltdm, &voltdm_list, node) { + struct clk *sys_ck; + + if (!voltdm->scalable) + continue; + + sys_ck = clk_get(NULL, voltdm->sys_clk.name); + if (IS_ERR(sys_ck)) { + pr_warning("%s: Could not get sys clk.\n", __func__); + return -EINVAL; + } + voltdm->sys_clk.rate = clk_get_rate(sys_ck); + WARN_ON(!voltdm->sys_clk.rate); + clk_put(sys_ck); + + if (voltdm->vc) { + voltdm->scale = omap_vc_bypass_scale; + omap_vc_init_channel(voltdm); + } + + if (voltdm->vp) { + voltdm->scale = omap_vp_forceupdate_scale; + omap_vp_init(voltdm); + } } - for (i = 0; i < nr_scalable_vdd; i++) { - if (!(strcmp(name, vdd_info[i]->voltdm.name))) - return &vdd_info[i]->voltdm; + return 0; +} + +static struct voltagedomain *_voltdm_lookup(const char *name) +{ + struct voltagedomain *voltdm, *temp_voltdm; + + voltdm = NULL; + + list_for_each_entry(temp_voltdm, &voltdm_list, node) { + if (!strcmp(name, temp_voltdm->name)) { + voltdm = temp_voltdm; + break; + } } - return ERR_PTR(-EINVAL); + return voltdm; } /** - * omap_voltage_late_init() - Init the various voltage parameters + * voltdm_add_pwrdm - add a powerdomain to a voltagedomain + * @voltdm: struct voltagedomain * to add the powerdomain to + * @pwrdm: struct powerdomain * to associate with a voltagedomain * - * This API is to be called in the later stages of the - * system boot to init the voltage controller and - * voltage processors. + * Associate the powerdomain @pwrdm with a voltagedomain @voltdm. This + * enables the use of voltdm_for_each_pwrdm(). Returns -EINVAL if + * presented with invalid pointers; -ENOMEM if memory could not be allocated; + * or 0 upon success. */ -int __init omap_voltage_late_init(void) +int voltdm_add_pwrdm(struct voltagedomain *voltdm, struct powerdomain *pwrdm) { - int i; + if (!voltdm || !pwrdm) + return -EINVAL; - if (!vdd_info) { - pr_err("%s: Voltage driver support not added\n", - __func__); + pr_debug("voltagedomain: associating powerdomain %s with voltagedomain " + "%s\n", pwrdm->name, voltdm->name); + + list_add(&pwrdm->voltdm_node, &voltdm->pwrdm_list); + + return 0; +} + +/** + * voltdm_for_each_pwrdm - call function for each pwrdm in a voltdm + * @voltdm: struct voltagedomain * to iterate over + * @fn: callback function * + * + * Call the supplied function @fn for each powerdomain in the + * voltagedomain @voltdm. Returns -EINVAL if presented with invalid + * pointers; or passes along the last return value of the callback + * function, which should be 0 for success or anything else to + * indicate failure. + */ +int voltdm_for_each_pwrdm(struct voltagedomain *voltdm, + int (*fn)(struct voltagedomain *voltdm, + struct powerdomain *pwrdm)) +{ + struct powerdomain *pwrdm; + int ret = 0; + + if (!fn) return -EINVAL; - } - voltage_dir = debugfs_create_dir("voltage", NULL); - if (IS_ERR(voltage_dir)) - pr_err("%s: Unable to create voltage debugfs main dir\n", - __func__); - for (i = 0; i < nr_scalable_vdd; i++) { - if (omap_vdd_data_configure(vdd_info[i])) - continue; - omap_vc_init(vdd_info[i]); - vp_init(vdd_info[i]); - vdd_debugfs_init(vdd_info[i]); + list_for_each_entry(pwrdm, &voltdm->pwrdm_list, voltdm_node) + ret = (*fn)(voltdm, pwrdm); + + return ret; +} + +/** + * voltdm_for_each - call function on each registered voltagedomain + * @fn: callback function * + * + * Call the supplied function @fn for each registered voltagedomain. + * The callback function @fn can return anything but 0 to bail out + * early from the iterator. Returns the last return value of the + * callback function, which should be 0 for success or anything else + * to indicate failure; or -EINVAL if the function pointer is null. + */ +int voltdm_for_each(int (*fn)(struct voltagedomain *voltdm, void *user), + void *user) +{ + struct voltagedomain *temp_voltdm; + int ret = 0; + + if (!fn) + return -EINVAL; + + list_for_each_entry(temp_voltdm, &voltdm_list, node) { + ret = (*fn)(temp_voltdm, user); + if (ret) + break; } - return 0; + return ret; } -/* XXX document */ -int __init omap_voltage_early_init(s16 prm_mod, s16 prm_irqst_ocp_mod, - struct omap_vdd_info *omap_vdd_array[], - u8 omap_vdd_count) +static int _voltdm_register(struct voltagedomain *voltdm) { - prm_mod_offs = prm_mod; - prm_irqst_ocp_mod_offs = prm_irqst_ocp_mod; - vdd_info = omap_vdd_array; - nr_scalable_vdd = omap_vdd_count; + if (!voltdm || !voltdm->name) + return -EINVAL; + + INIT_LIST_HEAD(&voltdm->pwrdm_list); + list_add(&voltdm->node, &voltdm_list); + + pr_debug("voltagedomain: registered %s\n", voltdm->name); + return 0; } + +/** + * voltdm_lookup - look up a voltagedomain by name, return a pointer + * @name: name of voltagedomain + * + * Find a registered voltagedomain by its name @name. Returns a pointer + * to the struct voltagedomain if found, or NULL otherwise. + */ +struct voltagedomain *voltdm_lookup(const char *name) +{ + struct voltagedomain *voltdm ; + + if (!name) + return NULL; + + voltdm = _voltdm_lookup(name); + + return voltdm; +} + +/** + * voltdm_init - set up the voltagedomain layer + * @voltdm_list: array of struct voltagedomain pointers to register + * + * Loop through the array of voltagedomains @voltdm_list, registering all + * that are available on the current CPU. If voltdm_list is supplied + * and not null, all of the referenced voltagedomains will be + * registered. No return value. + */ +void voltdm_init(struct voltagedomain **voltdms) +{ + struct voltagedomain **v; + + if (voltdms) { + for (v = voltdms; *v; v++) + _voltdm_register(*v); + } +} diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index e9f5408244e..16a1b092cf3 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -19,6 +19,8 @@ #include "vc.h" #include "vp.h" +struct powerdomain; + /* XXX document */ #define VOLTSCALE_VPFORCEUPDATE 1 #define VOLTSCALE_VCBYPASS 2 @@ -32,29 +34,60 @@ #define OMAP3_VOLTSETUP2 0xff /** - * struct omap_vfsm_instance_data - per-voltage manager FSM register/bitfield + * struct omap_vfsm_instance - per-voltage manager FSM register/bitfield * data * @voltsetup_mask: SETUP_TIME* bitmask in the PRM_VOLTSETUP* register * @voltsetup_reg: register offset of PRM_VOLTSETUP from PRM base - * @voltsetup_shift: SETUP_TIME* field shift in the PRM_VOLTSETUP* register * * XXX What about VOLTOFFSET/VOLTCTRL? - * XXX It is not necessary to have both a _mask and a _shift for the same - * bitfield - remove one! */ -struct omap_vfsm_instance_data { +struct omap_vfsm_instance { u32 voltsetup_mask; u8 voltsetup_reg; - u8 voltsetup_shift; }; /** * struct voltagedomain - omap voltage domain global structure. - * @name: Name of the voltage domain which can be used as a unique - * identifier. + * @name: Name of the voltage domain which can be used as a unique identifier. + * @scalable: Whether or not this voltage domain is scalable + * @node: list_head linking all voltage domains + * @pwrdm_list: list_head linking all powerdomains in this voltagedomain + * @vc: pointer to VC channel associated with this voltagedomain + * @vp: pointer to VP associated with this voltagedomain + * @read: read a VC/VP register + * @write: write a VC/VP register + * @read: read-modify-write a VC/VP register + * @sys_clk: system clock name/frequency, used for various timing calculations + * @scale: function used to scale the voltage of the voltagedomain + * @nominal_volt: current nominal voltage for this voltage domain + * @volt_data: voltage table having the distinct voltages supported + * by the domain and other associated per voltage data. */ struct voltagedomain { char *name; + bool scalable; + struct list_head node; + struct list_head pwrdm_list; + struct omap_vc_channel *vc; + const struct omap_vfsm_instance *vfsm; + struct omap_vp_instance *vp; + struct omap_voltdm_pmic *pmic; + + /* VC/VP register access functions: SoC specific */ + u32 (*read) (u8 offset); + void (*write) (u32 val, u8 offset); + u32 (*rmw)(u32 mask, u32 bits, u8 offset); + + union { + const char *name; + u32 rate; + } sys_clk; + + int (*scale) (struct voltagedomain *voltdm, + unsigned long target_volt); + + u32 nominal_volt; + struct omap_volt_data *volt_data; }; /** @@ -77,13 +110,18 @@ struct omap_volt_data { }; /** - * struct omap_volt_pmic_info - PMIC specific data required by voltage driver. + * struct omap_voltdm_pmic - PMIC specific data required by voltage driver. * @slew_rate: PMIC slew rate (in uv/us) * @step_size: PMIC voltage step size (in uv) + * @i2c_slave_addr: I2C slave address of PMIC + * @volt_reg_addr: voltage configuration register address + * @cmd_reg_addr: command (on, on-LP, ret, off) configuration register address + * @i2c_high_speed: whether VC uses I2C high-speed mode to PMIC + * @i2c_mcode: master code value for I2C high-speed preamble transmission * @vsel_to_uv: PMIC API to convert vsel value to actual voltage in uV. * @uv_to_vsel: PMIC API to convert voltage in uV to vsel value. */ -struct omap_volt_pmic_info { +struct omap_voltdm_pmic { int slew_rate; int step_size; u32 on_volt; @@ -91,94 +129,44 @@ struct omap_volt_pmic_info { u32 ret_volt; u32 off_volt; u16 volt_setup_time; + u16 i2c_slave_addr; + u16 volt_reg_addr; + u16 cmd_reg_addr; u8 vp_erroroffset; u8 vp_vstepmin; u8 vp_vstepmax; u8 vp_vddmin; u8 vp_vddmax; u8 vp_timeout_us; - u8 i2c_slave_addr; - u8 pmic_reg; + bool i2c_high_speed; + u8 i2c_mcode; unsigned long (*vsel_to_uv) (const u8 vsel); u8 (*uv_to_vsel) (unsigned long uV); }; -/** - * omap_vdd_info - Per Voltage Domain info - * - * @volt_data : voltage table having the distinct voltages supported - * by the domain and other associated per voltage data. - * @pmic_info : pmic specific parameters which should be populted by - * the pmic drivers. - * @vp_data : the register values, shifts, masks for various - * vp registers - * @vp_rt_data : VP data derived at runtime, not predefined - * @vc_data : structure containing various various vc registers, - * shifts, masks etc. - * @vfsm : voltage manager FSM data - * @voltdm : pointer to the voltage domain structure - * @debug_dir : debug directory for this voltage domain. - * @curr_volt : current voltage for this vdd. - * @vp_enabled : flag to keep track of whether vp is enabled or not - * @volt_scale : API to scale the voltage of the vdd. - */ -struct omap_vdd_info { - struct omap_volt_data *volt_data; - struct omap_volt_pmic_info *pmic_info; - struct omap_vp_instance_data *vp_data; - struct omap_vp_runtime_data vp_rt_data; - struct omap_vc_instance_data *vc_data; - const struct omap_vfsm_instance_data *vfsm; - struct voltagedomain voltdm; - struct dentry *debug_dir; - u32 curr_volt; - bool vp_enabled; - u32 (*read_reg) (u16 mod, u8 offset); - void (*write_reg) (u32 val, u16 mod, u8 offset); - int (*volt_scale) (struct omap_vdd_info *vdd, - unsigned long target_volt); -}; - -unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm); -void omap_vp_enable(struct voltagedomain *voltdm); -void omap_vp_disable(struct voltagedomain *voltdm); -int omap_voltage_scale_vdd(struct voltagedomain *voltdm, - unsigned long target_volt); -void omap_voltage_reset(struct voltagedomain *voltdm); void omap_voltage_get_volttable(struct voltagedomain *voltdm, struct omap_volt_data **volt_data); struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, unsigned long volt); -unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm); -struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm); -int __init omap_voltage_early_init(s16 prm_mod, s16 prm_irqst_mod, - struct omap_vdd_info *omap_vdd_array[], - u8 omap_vdd_count); -#ifdef CONFIG_PM int omap_voltage_register_pmic(struct voltagedomain *voltdm, - struct omap_volt_pmic_info *pmic_info); + struct omap_voltdm_pmic *pmic); void omap_change_voltscale_method(struct voltagedomain *voltdm, int voltscale_method); -/* API to get the voltagedomain pointer */ -struct voltagedomain *omap_voltage_domain_lookup(char *name); - int omap_voltage_late_init(void); -#else -static inline int omap_voltage_register_pmic(struct voltagedomain *voltdm, - struct omap_volt_pmic_info *pmic_info) -{ - return -EINVAL; -} -static inline void omap_change_voltscale_method(struct voltagedomain *voltdm, - int voltscale_method) {} -static inline int omap_voltage_late_init(void) -{ - return -EINVAL; -} -static inline struct voltagedomain *omap_voltage_domain_lookup(char *name) -{ - return ERR_PTR(-EINVAL); -} -#endif +extern void omap2xxx_voltagedomains_init(void); +extern void omap3xxx_voltagedomains_init(void); +extern void omap44xx_voltagedomains_init(void); + +struct voltagedomain *voltdm_lookup(const char *name); +void voltdm_init(struct voltagedomain **voltdm_list); +int voltdm_add_pwrdm(struct voltagedomain *voltdm, struct powerdomain *pwrdm); +int voltdm_for_each(int (*fn)(struct voltagedomain *voltdm, void *user), + void *user); +int voltdm_for_each_pwrdm(struct voltagedomain *voltdm, + int (*fn)(struct voltagedomain *voltdm, + struct powerdomain *pwrdm)); +int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt); +void voltdm_reset(struct voltagedomain *voltdm); +unsigned long voltdm_get_voltage(struct voltagedomain *voltdm); #endif diff --git a/arch/arm/mach-omap2/voltagedomains2xxx_data.c b/arch/arm/mach-omap2/voltagedomains2xxx_data.c new file mode 100644 index 00000000000..7a41349981e --- /dev/null +++ b/arch/arm/mach-omap2/voltagedomains2xxx_data.c @@ -0,0 +1,32 @@ +/* + * OMAP3 voltage domain data + * + * Copyright (C) 2011 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/init.h> + +#include "voltage.h" + +static struct voltagedomain omap2_voltdm_core = { + .name = "core", +}; + +static struct voltagedomain omap2_voltdm_wkup = { + .name = "wakeup", +}; + +static struct voltagedomain *voltagedomains_omap2[] __initdata = { + &omap2_voltdm_core, + &omap2_voltdm_wkup, + NULL, +}; + +void __init omap2xxx_voltagedomains_init(void) +{ + voltdm_init(voltagedomains_omap2); +} diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c index def230fd2fd..071101debbb 100644 --- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c +++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c @@ -31,65 +31,70 @@ * VDD data */ -static const struct omap_vfsm_instance_data omap3_vdd1_vfsm_data = { +static const struct omap_vfsm_instance omap3_vdd1_vfsm = { .voltsetup_reg = OMAP3_PRM_VOLTSETUP1_OFFSET, - .voltsetup_shift = OMAP3430_SETUP_TIME1_SHIFT, .voltsetup_mask = OMAP3430_SETUP_TIME1_MASK, }; -static struct omap_vdd_info omap3_vdd1_info = { - .vp_data = &omap3_vp1_data, - .vc_data = &omap3_vc1_data, - .vfsm = &omap3_vdd1_vfsm_data, - .voltdm = { - .name = "mpu", - }, -}; - -static const struct omap_vfsm_instance_data omap3_vdd2_vfsm_data = { +static const struct omap_vfsm_instance omap3_vdd2_vfsm = { .voltsetup_reg = OMAP3_PRM_VOLTSETUP1_OFFSET, - .voltsetup_shift = OMAP3430_SETUP_TIME2_SHIFT, .voltsetup_mask = OMAP3430_SETUP_TIME2_MASK, }; -static struct omap_vdd_info omap3_vdd2_info = { - .vp_data = &omap3_vp2_data, - .vc_data = &omap3_vc2_data, - .vfsm = &omap3_vdd2_vfsm_data, - .voltdm = { - .name = "core", - }, +static struct voltagedomain omap3_voltdm_mpu = { + .name = "mpu_iva", + .scalable = true, + .read = omap3_prm_vcvp_read, + .write = omap3_prm_vcvp_write, + .rmw = omap3_prm_vcvp_rmw, + .vc = &omap3_vc_mpu, + .vfsm = &omap3_vdd1_vfsm, + .vp = &omap3_vp_mpu, }; -/* OMAP3 VDD structures */ -static struct omap_vdd_info *omap3_vdd_info[] = { - &omap3_vdd1_info, - &omap3_vdd2_info, +static struct voltagedomain omap3_voltdm_core = { + .name = "core", + .scalable = true, + .read = omap3_prm_vcvp_read, + .write = omap3_prm_vcvp_write, + .rmw = omap3_prm_vcvp_rmw, + .vc = &omap3_vc_core, + .vfsm = &omap3_vdd2_vfsm, + .vp = &omap3_vp_core, }; -/* OMAP3 specific voltage init functions */ -static int __init omap3xxx_voltage_early_init(void) -{ - s16 prm_mod = OMAP3430_GR_MOD; - s16 prm_irqst_ocp_mod = OCP_MOD; +static struct voltagedomain omap3_voltdm_wkup = { + .name = "wakeup", +}; - if (!cpu_is_omap34xx()) - return 0; +static struct voltagedomain *voltagedomains_omap3[] __initdata = { + &omap3_voltdm_mpu, + &omap3_voltdm_core, + &omap3_voltdm_wkup, + NULL, +}; + +static const char *sys_clk_name __initdata = "sys_ck"; + +void __init omap3xxx_voltagedomains_init(void) +{ + struct voltagedomain *voltdm; + int i; /* * XXX Will depend on the process, validation, and binning * for the currently-running IC */ if (cpu_is_omap3630()) { - omap3_vdd1_info.volt_data = omap36xx_vddmpu_volt_data; - omap3_vdd2_info.volt_data = omap36xx_vddcore_volt_data; + omap3_voltdm_mpu.volt_data = omap36xx_vddmpu_volt_data; + omap3_voltdm_core.volt_data = omap36xx_vddcore_volt_data; } else { - omap3_vdd1_info.volt_data = omap34xx_vddmpu_volt_data; - omap3_vdd2_info.volt_data = omap34xx_vddcore_volt_data; + omap3_voltdm_mpu.volt_data = omap34xx_vddmpu_volt_data; + omap3_voltdm_core.volt_data = omap34xx_vddcore_volt_data; } - return omap_voltage_early_init(prm_mod, prm_irqst_ocp_mod, - omap3_vdd_info, - ARRAY_SIZE(omap3_vdd_info)); + for (i = 0; voltdm = voltagedomains_omap3[i], voltdm; i++) + voltdm->sys_clk.name = sys_clk_name; + + voltdm_init(voltagedomains_omap3); }; -core_initcall(omap3xxx_voltage_early_init); diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c index cb64996de0e..c4584e9ac71 100644 --- a/arch/arm/mach-omap2/voltagedomains44xx_data.c +++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c @@ -32,71 +32,80 @@ #include "vc.h" #include "vp.h" -static const struct omap_vfsm_instance_data omap4_vdd_mpu_vfsm_data = { +static const struct omap_vfsm_instance omap4_vdd_mpu_vfsm = { .voltsetup_reg = OMAP4_PRM_VOLTSETUP_MPU_RET_SLEEP_OFFSET, }; -static struct omap_vdd_info omap4_vdd_mpu_info = { - .vp_data = &omap4_vp_mpu_data, - .vc_data = &omap4_vc_mpu_data, - .vfsm = &omap4_vdd_mpu_vfsm_data, - .voltdm = { - .name = "mpu", - }, +static const struct omap_vfsm_instance omap4_vdd_iva_vfsm = { + .voltsetup_reg = OMAP4_PRM_VOLTSETUP_IVA_RET_SLEEP_OFFSET, }; -static const struct omap_vfsm_instance_data omap4_vdd_iva_vfsm_data = { - .voltsetup_reg = OMAP4_PRM_VOLTSETUP_IVA_RET_SLEEP_OFFSET, +static const struct omap_vfsm_instance omap4_vdd_core_vfsm = { + .voltsetup_reg = OMAP4_PRM_VOLTSETUP_CORE_RET_SLEEP_OFFSET, }; -static struct omap_vdd_info omap4_vdd_iva_info = { - .vp_data = &omap4_vp_iva_data, - .vc_data = &omap4_vc_iva_data, - .vfsm = &omap4_vdd_iva_vfsm_data, - .voltdm = { - .name = "iva", - }, +static struct voltagedomain omap4_voltdm_mpu = { + .name = "mpu", + .scalable = true, + .read = omap4_prm_vcvp_read, + .write = omap4_prm_vcvp_write, + .rmw = omap4_prm_vcvp_rmw, + .vc = &omap4_vc_mpu, + .vfsm = &omap4_vdd_mpu_vfsm, + .vp = &omap4_vp_mpu, }; -static const struct omap_vfsm_instance_data omap4_vdd_core_vfsm_data = { - .voltsetup_reg = OMAP4_PRM_VOLTSETUP_CORE_RET_SLEEP_OFFSET, +static struct voltagedomain omap4_voltdm_iva = { + .name = "iva", + .scalable = true, + .read = omap4_prm_vcvp_read, + .write = omap4_prm_vcvp_write, + .rmw = omap4_prm_vcvp_rmw, + .vc = &omap4_vc_iva, + .vfsm = &omap4_vdd_iva_vfsm, + .vp = &omap4_vp_iva, }; -static struct omap_vdd_info omap4_vdd_core_info = { - .vp_data = &omap4_vp_core_data, - .vc_data = &omap4_vc_core_data, - .vfsm = &omap4_vdd_core_vfsm_data, - .voltdm = { - .name = "core", - }, +static struct voltagedomain omap4_voltdm_core = { + .name = "core", + .scalable = true, + .read = omap4_prm_vcvp_read, + .write = omap4_prm_vcvp_write, + .rmw = omap4_prm_vcvp_rmw, + .vc = &omap4_vc_core, + .vfsm = &omap4_vdd_core_vfsm, + .vp = &omap4_vp_core, }; -/* OMAP4 VDD structures */ -static struct omap_vdd_info *omap4_vdd_info[] = { - &omap4_vdd_mpu_info, - &omap4_vdd_iva_info, - &omap4_vdd_core_info, +static struct voltagedomain omap4_voltdm_wkup = { + .name = "wakeup", }; -/* OMAP4 specific voltage init functions */ -static int __init omap44xx_voltage_early_init(void) -{ - s16 prm_mod = OMAP4430_PRM_DEVICE_INST; - s16 prm_irqst_ocp_mod = OMAP4430_PRM_OCP_SOCKET_INST; +static struct voltagedomain *voltagedomains_omap4[] __initdata = { + &omap4_voltdm_mpu, + &omap4_voltdm_iva, + &omap4_voltdm_core, + &omap4_voltdm_wkup, + NULL, +}; + +static const char *sys_clk_name __initdata = "sys_clkin_ck"; - if (!cpu_is_omap44xx()) - return 0; +void __init omap44xx_voltagedomains_init(void) +{ + struct voltagedomain *voltdm; + int i; /* * XXX Will depend on the process, validation, and binning * for the currently-running IC */ - omap4_vdd_mpu_info.volt_data = omap44xx_vdd_mpu_volt_data; - omap4_vdd_iva_info.volt_data = omap44xx_vdd_iva_volt_data; - omap4_vdd_core_info.volt_data = omap44xx_vdd_core_volt_data; + omap4_voltdm_mpu.volt_data = omap44xx_vdd_mpu_volt_data; + omap4_voltdm_iva.volt_data = omap44xx_vdd_iva_volt_data; + omap4_voltdm_core.volt_data = omap44xx_vdd_core_volt_data; + + for (i = 0; voltdm = voltagedomains_omap4[i], voltdm; i++) + voltdm->sys_clk.name = sys_clk_name; - return omap_voltage_early_init(prm_mod, prm_irqst_ocp_mod, - omap4_vdd_info, - ARRAY_SIZE(omap4_vdd_info)); + voltdm_init(voltagedomains_omap4); }; -core_initcall(omap44xx_voltage_early_init); diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c new file mode 100644 index 00000000000..66bd700a2b9 --- /dev/null +++ b/arch/arm/mach-omap2/vp.c @@ -0,0 +1,278 @@ +#include <linux/kernel.h> +#include <linux/init.h> + +#include <plat/common.h> + +#include "voltage.h" +#include "vp.h" +#include "prm-regbits-34xx.h" +#include "prm-regbits-44xx.h" +#include "prm44xx.h" + +static u32 _vp_set_init_voltage(struct voltagedomain *voltdm, u32 volt) +{ + struct omap_vp_instance *vp = voltdm->vp; + u32 vpconfig; + char vsel; + + vsel = voltdm->pmic->uv_to_vsel(volt); + + vpconfig = voltdm->read(vp->vpconfig); + vpconfig &= ~(vp->common->vpconfig_initvoltage_mask | + vp->common->vpconfig_forceupdate | + vp->common->vpconfig_initvdd); + vpconfig |= vsel << __ffs(vp->common->vpconfig_initvoltage_mask); + voltdm->write(vpconfig, vp->vpconfig); + + /* Trigger initVDD value copy to voltage processor */ + voltdm->write((vpconfig | vp->common->vpconfig_initvdd), + vp->vpconfig); + + /* Clear initVDD copy trigger bit */ + voltdm->write(vpconfig, vp->vpconfig); + + return vpconfig; +} + +/* Generic voltage init functions */ +void __init omap_vp_init(struct voltagedomain *voltdm) +{ + struct omap_vp_instance *vp = voltdm->vp; + u32 val, sys_clk_rate, timeout, waittime; + u32 vddmin, vddmax, vstepmin, vstepmax; + + if (!voltdm->read || !voltdm->write) { + pr_err("%s: No read/write API for accessing vdd_%s regs\n", + __func__, voltdm->name); + return; + } + + vp->enabled = false; + + /* Divide to avoid overflow */ + sys_clk_rate = voltdm->sys_clk.rate / 1000; + + timeout = (sys_clk_rate * voltdm->pmic->vp_timeout_us) / 1000; + vddmin = voltdm->pmic->vp_vddmin; + vddmax = voltdm->pmic->vp_vddmax; + + waittime = ((voltdm->pmic->step_size / voltdm->pmic->slew_rate) * + sys_clk_rate) / 1000; + vstepmin = voltdm->pmic->vp_vstepmin; + vstepmax = voltdm->pmic->vp_vstepmax; + + /* + * VP_CONFIG: error gain is not set here, it will be updated + * on each scale, based on OPP. + */ + val = (voltdm->pmic->vp_erroroffset << + __ffs(voltdm->vp->common->vpconfig_erroroffset_mask)) | + vp->common->vpconfig_timeouten; + voltdm->write(val, vp->vpconfig); + + /* VSTEPMIN */ + val = (waittime << vp->common->vstepmin_smpswaittimemin_shift) | + (vstepmin << vp->common->vstepmin_stepmin_shift); + voltdm->write(val, vp->vstepmin); + + /* VSTEPMAX */ + val = (vstepmax << vp->common->vstepmax_stepmax_shift) | + (waittime << vp->common->vstepmax_smpswaittimemax_shift); + voltdm->write(val, vp->vstepmax); + + /* VLIMITTO */ + val = (vddmax << vp->common->vlimitto_vddmax_shift) | + (vddmin << vp->common->vlimitto_vddmin_shift) | + (timeout << vp->common->vlimitto_timeout_shift); + voltdm->write(val, vp->vlimitto); +} + +int omap_vp_update_errorgain(struct voltagedomain *voltdm, + unsigned long target_volt) +{ + struct omap_volt_data *volt_data; + + if (!voltdm->vp) + return -EINVAL; + + /* Get volt_data corresponding to target_volt */ + volt_data = omap_voltage_get_voltdata(voltdm, target_volt); + if (IS_ERR(volt_data)) + return -EINVAL; + + /* Setting vp errorgain based on the voltage */ + voltdm->rmw(voltdm->vp->common->vpconfig_errorgain_mask, + volt_data->vp_errgain << + __ffs(voltdm->vp->common->vpconfig_errorgain_mask), + voltdm->vp->vpconfig); + + return 0; +} + +/* VP force update method of voltage scaling */ +int omap_vp_forceupdate_scale(struct voltagedomain *voltdm, + unsigned long target_volt) +{ + struct omap_vp_instance *vp = voltdm->vp; + u32 vpconfig; + u8 target_vsel, current_vsel; + int ret, timeout = 0; + + ret = omap_vc_pre_scale(voltdm, target_volt, &target_vsel, ¤t_vsel); + if (ret) + return ret; + + /* + * Clear all pending TransactionDone interrupt/status. Typical latency + * is <3us + */ + while (timeout++ < VP_TRANXDONE_TIMEOUT) { + vp->common->ops->clear_txdone(vp->id); + if (!vp->common->ops->check_txdone(vp->id)) + break; + udelay(1); + } + if (timeout >= VP_TRANXDONE_TIMEOUT) { + pr_warning("%s: vdd_%s TRANXDONE timeout exceeded." + "Voltage change aborted", __func__, voltdm->name); + return -ETIMEDOUT; + } + + vpconfig = _vp_set_init_voltage(voltdm, target_volt); + + /* Force update of voltage */ + voltdm->write(vpconfig | vp->common->vpconfig_forceupdate, + voltdm->vp->vpconfig); + + /* + * Wait for TransactionDone. Typical latency is <200us. + * Depends on SMPSWAITTIMEMIN/MAX and voltage change + */ + timeout = 0; + omap_test_timeout(vp->common->ops->check_txdone(vp->id), + VP_TRANXDONE_TIMEOUT, timeout); + if (timeout >= VP_TRANXDONE_TIMEOUT) + pr_err("%s: vdd_%s TRANXDONE timeout exceeded." + "TRANXDONE never got set after the voltage update\n", + __func__, voltdm->name); + + omap_vc_post_scale(voltdm, target_volt, target_vsel, current_vsel); + + /* + * Disable TransactionDone interrupt , clear all status, clear + * control registers + */ + timeout = 0; + while (timeout++ < VP_TRANXDONE_TIMEOUT) { + vp->common->ops->clear_txdone(vp->id); + if (!vp->common->ops->check_txdone(vp->id)) + break; + udelay(1); + } + + if (timeout >= VP_TRANXDONE_TIMEOUT) + pr_warning("%s: vdd_%s TRANXDONE timeout exceeded while trying" + "to clear the TRANXDONE status\n", + __func__, voltdm->name); + + /* Clear force bit */ + voltdm->write(vpconfig, vp->vpconfig); + + return 0; +} + +/** + * omap_vp_enable() - API to enable a particular VP + * @voltdm: pointer to the VDD whose VP is to be enabled. + * + * This API enables a particular voltage processor. Needed by the smartreflex + * class drivers. + */ +void omap_vp_enable(struct voltagedomain *voltdm) +{ + struct omap_vp_instance *vp; + u32 vpconfig, volt; + + if (!voltdm || IS_ERR(voltdm)) { + pr_warning("%s: VDD specified does not exist!\n", __func__); + return; + } + + vp = voltdm->vp; + if (!voltdm->read || !voltdm->write) { + pr_err("%s: No read/write API for accessing vdd_%s regs\n", + __func__, voltdm->name); + return; + } + + /* If VP is already enabled, do nothing. Return */ + if (vp->enabled) + return; + + volt = voltdm_get_voltage(voltdm); + if (!volt) { + pr_warning("%s: unable to find current voltage for %s\n", + __func__, voltdm->name); + return; + } + + vpconfig = _vp_set_init_voltage(voltdm, volt); + + /* Enable VP */ + vpconfig |= vp->common->vpconfig_vpenable; + voltdm->write(vpconfig, vp->vpconfig); + + vp->enabled = true; +} + +/** + * omap_vp_disable() - API to disable a particular VP + * @voltdm: pointer to the VDD whose VP is to be disabled. + * + * This API disables a particular voltage processor. Needed by the smartreflex + * class drivers. + */ +void omap_vp_disable(struct voltagedomain *voltdm) +{ + struct omap_vp_instance *vp; + u32 vpconfig; + int timeout; + + if (!voltdm || IS_ERR(voltdm)) { + pr_warning("%s: VDD specified does not exist!\n", __func__); + return; + } + + vp = voltdm->vp; + if (!voltdm->read || !voltdm->write) { + pr_err("%s: No read/write API for accessing vdd_%s regs\n", + __func__, voltdm->name); + return; + } + + /* If VP is already disabled, do nothing. Return */ + if (!vp->enabled) { + pr_warning("%s: Trying to disable VP for vdd_%s when" + "it is already disabled\n", __func__, voltdm->name); + return; + } + + /* Disable VP */ + vpconfig = voltdm->read(vp->vpconfig); + vpconfig &= ~vp->common->vpconfig_vpenable; + voltdm->write(vpconfig, vp->vpconfig); + + /* + * Wait for VP idle Typical latency is <2us. Maximum latency is ~100us + */ + omap_test_timeout((voltdm->read(vp->vstatus)), + VP_IDLE_TIMEOUT, timeout); + + if (timeout >= VP_IDLE_TIMEOUT) + pr_warning("%s: vdd_%s idle timedout\n", + __func__, voltdm->name); + + vp->enabled = false; + + return; +} diff --git a/arch/arm/mach-omap2/vp.h b/arch/arm/mach-omap2/vp.h index 7ce134f7de7..7c155d248aa 100644 --- a/arch/arm/mach-omap2/vp.h +++ b/arch/arm/mach-omap2/vp.h @@ -19,44 +19,60 @@ #include <linux/kernel.h> +struct voltagedomain; + +/* + * Voltage Processor (VP) identifiers + */ +#define OMAP3_VP_VDD_MPU_ID 0 +#define OMAP3_VP_VDD_CORE_ID 1 +#define OMAP4_VP_VDD_CORE_ID 0 +#define OMAP4_VP_VDD_IVA_ID 1 +#define OMAP4_VP_VDD_MPU_ID 2 + /* XXX document */ #define VP_IDLE_TIMEOUT 200 #define VP_TRANXDONE_TIMEOUT 300 +/** + * struct omap_vp_ops - per-VP operations + * @check_txdone: check for VP transaction done + * @clear_txdone: clear VP transaction done status + */ +struct omap_vp_ops { + u32 (*check_txdone)(u8 vp_id); + void (*clear_txdone)(u8 vp_id); +}; /** - * struct omap_vp_common_data - register data common to all VDDs + * struct omap_vp_common - register data common to all VDDs + * @vpconfig_erroroffset_mask: ERROROFFSET bitmask in the PRM_VP*_CONFIG reg * @vpconfig_errorgain_mask: ERRORGAIN bitmask in the PRM_VP*_CONFIG reg * @vpconfig_initvoltage_mask: INITVOLTAGE bitmask in the PRM_VP*_CONFIG reg - * @vpconfig_timeouten_mask: TIMEOUT bitmask in the PRM_VP*_CONFIG reg + * @vpconfig_timeouten: TIMEOUT bitmask in the PRM_VP*_CONFIG reg * @vpconfig_initvdd: INITVDD bitmask in the PRM_VP*_CONFIG reg * @vpconfig_forceupdate: FORCEUPDATE bitmask in the PRM_VP*_CONFIG reg * @vpconfig_vpenable: VPENABLE bitmask in the PRM_VP*_CONFIG reg * @vpconfig_erroroffset_shift: ERROROFFSET field shift in PRM_VP*_CONFIG reg * @vpconfig_errorgain_shift: ERRORGAIN field shift in PRM_VP*_CONFIG reg * @vpconfig_initvoltage_shift: INITVOLTAGE field shift in PRM_VP*_CONFIG reg - * @vpconfig_stepmin_shift: VSTEPMIN field shift in the PRM_VP*_VSTEPMIN reg - * @vpconfig_smpswaittimemin_shift: SMPSWAITTIMEMIN field shift in PRM_VP*_VSTEPMIN reg - * @vpconfig_stepmax_shift: VSTEPMAX field shift in the PRM_VP*_VSTEPMAX reg - * @vpconfig_smpswaittimemax_shift: SMPSWAITTIMEMAX field shift in PRM_VP*_VSTEPMAX reg - * @vpconfig_vlimitto_vddmin_shift: VDDMIN field shift in PRM_VP*_VLIMITTO reg - * @vpconfig_vlimitto_vddmax_shift: VDDMAX field shift in PRM_VP*_VLIMITTO reg - * @vpconfig_vlimitto_timeout_shift: TIMEOUT field shift in PRM_VP*_VLIMITTO reg - * - * XXX It it not necessary to have both a mask and a shift for the same - * bitfield - remove one - * XXX Many of these fields are wrongly named -- e.g., vpconfig_smps* -- fix! + * @vstepmin_stepmin_shift: VSTEPMIN field shift in the PRM_VP*_VSTEPMIN reg + * @vstepmin_smpswaittimemin_shift: SMPSWAITTIMEMIN field shift in PRM_VP*_VSTEPMIN reg + * @vstepmax_stepmax_shift: VSTEPMAX field shift in the PRM_VP*_VSTEPMAX reg + * @vstepmax_smpswaittimemax_shift: SMPSWAITTIMEMAX field shift in PRM_VP*_VSTEPMAX reg + * @vlimitto_vddmin_shift: VDDMIN field shift in PRM_VP*_VLIMITTO reg + * @vlimitto_vddmax_shift: VDDMAX field shift in PRM_VP*_VLIMITTO reg + * @vlimitto_timeout_shift: TIMEOUT field shift in PRM_VP*_VLIMITTO reg + * @vpvoltage_mask: VPVOLTAGE field mask in PRM_VP*_VOLTAGE reg */ -struct omap_vp_common_data { +struct omap_vp_common { + u32 vpconfig_erroroffset_mask; u32 vpconfig_errorgain_mask; u32 vpconfig_initvoltage_mask; - u32 vpconfig_timeouten; - u32 vpconfig_initvdd; - u32 vpconfig_forceupdate; - u32 vpconfig_vpenable; - u8 vpconfig_erroroffset_shift; - u8 vpconfig_errorgain_shift; - u8 vpconfig_initvoltage_shift; + u8 vpconfig_timeouten; + u8 vpconfig_initvdd; + u8 vpconfig_forceupdate; + u8 vpconfig_vpenable; u8 vstepmin_stepmin_shift; u8 vstepmin_smpswaittimemin_shift; u8 vstepmax_stepmax_shift; @@ -64,80 +80,49 @@ struct omap_vp_common_data { u8 vlimitto_vddmin_shift; u8 vlimitto_vddmax_shift; u8 vlimitto_timeout_shift; -}; + u8 vpvoltage_mask; -/** - * struct omap_vp_prm_irqst_data - PRM_IRQSTATUS_MPU.VP_TRANXDONE_ST data - * @prm_irqst_reg: reg offset for PRM_IRQSTATUS_MPU from top of PRM - * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg - * - * XXX prm_irqst_reg does not belong here - * XXX Note that on OMAP3, VP_TRANXDONE interrupt may not work due to a - * hardware bug - * XXX This structure is probably not needed - */ -struct omap_vp_prm_irqst_data { - u8 prm_irqst_reg; - u32 tranxdone_status; + const struct omap_vp_ops *ops; }; /** - * struct omap_vp_instance_data - VP register offsets (per-VDD) - * @vp_common: pointer to struct omap_vp_common_data * for this SoC - * @prm_irqst_data: pointer to struct omap_vp_prm_irqst_data for this VDD + * struct omap_vp_instance - VP register offsets (per-VDD) + * @common: pointer to struct omap_vp_common * for this SoC * @vpconfig: PRM_VP*_CONFIG reg offset from PRM start * @vstepmin: PRM_VP*_VSTEPMIN reg offset from PRM start * @vlimitto: PRM_VP*_VLIMITTO reg offset from PRM start * @vstatus: PRM_VP*_VSTATUS reg offset from PRM start * @voltage: PRM_VP*_VOLTAGE reg offset from PRM start + * @id: Unique identifier for VP instance. + * @enabled: flag to keep track of whether vp is enabled or not * * XXX vp_common is probably not needed since it is per-SoC */ -struct omap_vp_instance_data { - const struct omap_vp_common_data *vp_common; - const struct omap_vp_prm_irqst_data *prm_irqst_data; +struct omap_vp_instance { + const struct omap_vp_common *common; u8 vpconfig; u8 vstepmin; u8 vstepmax; u8 vlimitto; u8 vstatus; u8 voltage; + u8 id; + bool enabled; }; -/** - * struct omap_vp_runtime_data - VP data populated at runtime by code - * @vpconfig_erroroffset: value of ERROROFFSET bitfield in PRM_VP*_CONFIG - * @vpconfig_errorgain: value of ERRORGAIN bitfield in PRM_VP*_CONFIG - * @vstepmin_smpswaittimemin: value of SMPSWAITTIMEMIN bitfield in PRM_VP*_VSTEPMIN - * @vstepmax_smpswaittimemax: value of SMPSWAITTIMEMAX bitfield in PRM_VP*_VSTEPMAX - * @vlimitto_timeout: value of TIMEOUT bitfield in PRM_VP*_VLIMITTO - * @vstepmin_stepmin: value of VSTEPMIN bitfield in PRM_VP*_VSTEPMIN - * @vstepmax_stepmax: value of VSTEPMAX bitfield in PRM_VP*_VSTEPMAX - * @vlimitto_vddmin: value of VDDMIN bitfield in PRM_VP*_VLIMITTO - * @vlimitto_vddmax: value of VDDMAX bitfield in PRM_VP*_VLIMITTO - * - * XXX Is this structure really needed? Why not just program the - * device directly? They are in PRM space, therefore in the WKUP - * powerdomain, so register contents should not be lost in off-mode. - * XXX Some of these fields are incorrectly named, e.g., vstep* - */ -struct omap_vp_runtime_data { - u32 vpconfig_erroroffset; - u16 vpconfig_errorgain; - u16 vstepmin_smpswaittimemin; - u16 vstepmax_smpswaittimemax; - u16 vlimitto_timeout; - u8 vstepmin_stepmin; - u8 vstepmax_stepmax; - u8 vlimitto_vddmin; - u8 vlimitto_vddmax; -}; +extern struct omap_vp_instance omap3_vp_mpu; +extern struct omap_vp_instance omap3_vp_core; -extern struct omap_vp_instance_data omap3_vp1_data; -extern struct omap_vp_instance_data omap3_vp2_data; +extern struct omap_vp_instance omap4_vp_mpu; +extern struct omap_vp_instance omap4_vp_iva; +extern struct omap_vp_instance omap4_vp_core; -extern struct omap_vp_instance_data omap4_vp_mpu_data; -extern struct omap_vp_instance_data omap4_vp_iva_data; -extern struct omap_vp_instance_data omap4_vp_core_data; +void omap_vp_init(struct voltagedomain *voltdm); +void omap_vp_enable(struct voltagedomain *voltdm); +void omap_vp_disable(struct voltagedomain *voltdm); +int omap_vp_forceupdate_scale(struct voltagedomain *voltdm, + unsigned long target_volt); +int omap_vp_update_errorgain(struct voltagedomain *voltdm, + unsigned long target_volt); #endif diff --git a/arch/arm/mach-omap2/vp3xxx_data.c b/arch/arm/mach-omap2/vp3xxx_data.c index 645217094e5..260c554b154 100644 --- a/arch/arm/mach-omap2/vp3xxx_data.c +++ b/arch/arm/mach-omap2/vp3xxx_data.c @@ -25,16 +25,20 @@ #include "voltage.h" #include "vp.h" +#include "prm2xxx_3xxx.h" + +static const struct omap_vp_ops omap3_vp_ops = { + .check_txdone = omap3_prm_vp_check_txdone, + .clear_txdone = omap3_prm_vp_clear_txdone, +}; /* * VP data common to 34xx/36xx chips * XXX This stuff presumably belongs in the vp3xxx.c or vp.c file. */ -static const struct omap_vp_common_data omap3_vp_common = { - .vpconfig_erroroffset_shift = OMAP3430_ERROROFFSET_SHIFT, +static const struct omap_vp_common omap3_vp_common = { + .vpconfig_erroroffset_mask = OMAP3430_ERROROFFSET_MASK, .vpconfig_errorgain_mask = OMAP3430_ERRORGAIN_MASK, - .vpconfig_errorgain_shift = OMAP3430_ERRORGAIN_SHIFT, - .vpconfig_initvoltage_shift = OMAP3430_INITVOLTAGE_SHIFT, .vpconfig_initvoltage_mask = OMAP3430_INITVOLTAGE_MASK, .vpconfig_timeouten = OMAP3430_TIMEOUTEN_MASK, .vpconfig_initvdd = OMAP3430_INITVDD_MASK, @@ -47,36 +51,29 @@ static const struct omap_vp_common_data omap3_vp_common = { .vlimitto_vddmin_shift = OMAP3430_VDDMIN_SHIFT, .vlimitto_vddmax_shift = OMAP3430_VDDMAX_SHIFT, .vlimitto_timeout_shift = OMAP3430_TIMEOUT_SHIFT, -}; + .vpvoltage_mask = OMAP3430_VPVOLTAGE_MASK, -static const struct omap_vp_prm_irqst_data omap3_vp1_prm_irqst_data = { - .prm_irqst_reg = OMAP3_PRM_IRQSTATUS_MPU_OFFSET, - .tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK, + .ops = &omap3_vp_ops, }; -struct omap_vp_instance_data omap3_vp1_data = { - .vp_common = &omap3_vp_common, +struct omap_vp_instance omap3_vp_mpu = { + .id = OMAP3_VP_VDD_MPU_ID, + .common = &omap3_vp_common, .vpconfig = OMAP3_PRM_VP1_CONFIG_OFFSET, .vstepmin = OMAP3_PRM_VP1_VSTEPMIN_OFFSET, .vstepmax = OMAP3_PRM_VP1_VSTEPMAX_OFFSET, .vlimitto = OMAP3_PRM_VP1_VLIMITTO_OFFSET, .vstatus = OMAP3_PRM_VP1_STATUS_OFFSET, .voltage = OMAP3_PRM_VP1_VOLTAGE_OFFSET, - .prm_irqst_data = &omap3_vp1_prm_irqst_data, -}; - -static const struct omap_vp_prm_irqst_data omap3_vp2_prm_irqst_data = { - .prm_irqst_reg = OMAP3_PRM_IRQSTATUS_MPU_OFFSET, - .tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK, }; -struct omap_vp_instance_data omap3_vp2_data = { - .vp_common = &omap3_vp_common, +struct omap_vp_instance omap3_vp_core = { + .id = OMAP3_VP_VDD_CORE_ID, + .common = &omap3_vp_common, .vpconfig = OMAP3_PRM_VP2_CONFIG_OFFSET, .vstepmin = OMAP3_PRM_VP2_VSTEPMIN_OFFSET, .vstepmax = OMAP3_PRM_VP2_VSTEPMAX_OFFSET, .vlimitto = OMAP3_PRM_VP2_VLIMITTO_OFFSET, .vstatus = OMAP3_PRM_VP2_STATUS_OFFSET, .voltage = OMAP3_PRM_VP2_VOLTAGE_OFFSET, - .prm_irqst_data = &omap3_vp2_prm_irqst_data, }; diff --git a/arch/arm/mach-omap2/vp44xx_data.c b/arch/arm/mach-omap2/vp44xx_data.c index 65d1ad63800..b4e77044891 100644 --- a/arch/arm/mach-omap2/vp44xx_data.c +++ b/arch/arm/mach-omap2/vp44xx_data.c @@ -27,15 +27,18 @@ #include "vp.h" +static const struct omap_vp_ops omap4_vp_ops = { + .check_txdone = omap4_prm_vp_check_txdone, + .clear_txdone = omap4_prm_vp_clear_txdone, +}; + /* * VP data common to 44xx chips * XXX This stuff presumably belongs in the vp44xx.c or vp.c file. */ -static const struct omap_vp_common_data omap4_vp_common = { - .vpconfig_erroroffset_shift = OMAP4430_ERROROFFSET_SHIFT, +static const struct omap_vp_common omap4_vp_common = { + .vpconfig_erroroffset_mask = OMAP4430_ERROROFFSET_MASK, .vpconfig_errorgain_mask = OMAP4430_ERRORGAIN_MASK, - .vpconfig_errorgain_shift = OMAP4430_ERRORGAIN_SHIFT, - .vpconfig_initvoltage_shift = OMAP4430_INITVOLTAGE_SHIFT, .vpconfig_initvoltage_mask = OMAP4430_INITVOLTAGE_MASK, .vpconfig_timeouten = OMAP4430_TIMEOUTEN_MASK, .vpconfig_initvdd = OMAP4430_INITVDD_MASK, @@ -48,53 +51,39 @@ static const struct omap_vp_common_data omap4_vp_common = { .vlimitto_vddmin_shift = OMAP4430_VDDMIN_SHIFT, .vlimitto_vddmax_shift = OMAP4430_VDDMAX_SHIFT, .vlimitto_timeout_shift = OMAP4430_TIMEOUT_SHIFT, + .vpvoltage_mask = OMAP4430_VPVOLTAGE_MASK, + .ops = &omap4_vp_ops, }; -static const struct omap_vp_prm_irqst_data omap4_vp_mpu_prm_irqst_data = { - .prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET, - .tranxdone_status = OMAP4430_VP_MPU_TRANXDONE_ST_MASK, -}; - -struct omap_vp_instance_data omap4_vp_mpu_data = { - .vp_common = &omap4_vp_common, +struct omap_vp_instance omap4_vp_mpu = { + .id = OMAP4_VP_VDD_MPU_ID, + .common = &omap4_vp_common, .vpconfig = OMAP4_PRM_VP_MPU_CONFIG_OFFSET, .vstepmin = OMAP4_PRM_VP_MPU_VSTEPMIN_OFFSET, .vstepmax = OMAP4_PRM_VP_MPU_VSTEPMAX_OFFSET, .vlimitto = OMAP4_PRM_VP_MPU_VLIMITTO_OFFSET, .vstatus = OMAP4_PRM_VP_MPU_STATUS_OFFSET, .voltage = OMAP4_PRM_VP_MPU_VOLTAGE_OFFSET, - .prm_irqst_data = &omap4_vp_mpu_prm_irqst_data, }; -static const struct omap_vp_prm_irqst_data omap4_vp_iva_prm_irqst_data = { - .prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET, - .tranxdone_status = OMAP4430_VP_IVA_TRANXDONE_ST_MASK, -}; - -struct omap_vp_instance_data omap4_vp_iva_data = { - .vp_common = &omap4_vp_common, +struct omap_vp_instance omap4_vp_iva = { + .id = OMAP4_VP_VDD_IVA_ID, + .common = &omap4_vp_common, .vpconfig = OMAP4_PRM_VP_IVA_CONFIG_OFFSET, .vstepmin = OMAP4_PRM_VP_IVA_VSTEPMIN_OFFSET, .vstepmax = OMAP4_PRM_VP_IVA_VSTEPMAX_OFFSET, .vlimitto = OMAP4_PRM_VP_IVA_VLIMITTO_OFFSET, .vstatus = OMAP4_PRM_VP_IVA_STATUS_OFFSET, .voltage = OMAP4_PRM_VP_IVA_VOLTAGE_OFFSET, - .prm_irqst_data = &omap4_vp_iva_prm_irqst_data, -}; - -static const struct omap_vp_prm_irqst_data omap4_vp_core_prm_irqst_data = { - .prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET, - .tranxdone_status = OMAP4430_VP_CORE_TRANXDONE_ST_MASK, }; -struct omap_vp_instance_data omap4_vp_core_data = { - .vp_common = &omap4_vp_common, +struct omap_vp_instance omap4_vp_core = { + .id = OMAP4_VP_VDD_CORE_ID, + .common = &omap4_vp_common, .vpconfig = OMAP4_PRM_VP_CORE_CONFIG_OFFSET, .vstepmin = OMAP4_PRM_VP_CORE_VSTEPMIN_OFFSET, .vstepmax = OMAP4_PRM_VP_CORE_VSTEPMAX_OFFSET, .vlimitto = OMAP4_PRM_VP_CORE_VLIMITTO_OFFSET, .vstatus = OMAP4_PRM_VP_CORE_STATUS_OFFSET, .voltage = OMAP4_PRM_VP_CORE_VOLTAGE_OFFSET, - .prm_irqst_data = &omap4_vp_core_prm_irqst_data, }; - diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index e25f60f5db8..9e5c1663fc4 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -77,7 +77,7 @@ static int __init dns323_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) /* * Check for devices with hard-wired IRQs. */ - irq = orion5x_pci_map_irq(const dev, slot, pin); + irq = orion5x_pci_map_irq(dev, slot, pin); if (irq != -1) return irq; diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index 28b8760ab9f..bc4a920e26e 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -14,6 +14,7 @@ #include <linux/pci.h> #include <linux/slab.h> #include <linux/mbus.h> +#include <video/vga.h> #include <asm/irq.h> #include <asm/mach/pci.h> #include <plat/pcie.h> diff --git a/arch/arm/mach-prima2/clock.c b/arch/arm/mach-prima2/clock.c index f9a2aaf63f7..615a4e75cea 100644 --- a/arch/arm/mach-prima2/clock.c +++ b/arch/arm/mach-prima2/clock.c @@ -481,6 +481,7 @@ static void __init sirfsoc_clk_init(void) static struct of_device_id clkc_ids[] = { { .compatible = "sirf,prima2-clkc" }, + {}, }; void __init sirfsoc_of_clk_init(void) diff --git a/arch/arm/mach-prima2/irq.c b/arch/arm/mach-prima2/irq.c index c3404cbb6ff..7af254d046b 100644 --- a/arch/arm/mach-prima2/irq.c +++ b/arch/arm/mach-prima2/irq.c @@ -51,6 +51,7 @@ static __init void sirfsoc_irq_init(void) static struct of_device_id intc_ids[] = { { .compatible = "sirf,prima2-intc" }, + {}, }; void __init sirfsoc_of_irq_init(void) diff --git a/arch/arm/mach-prima2/rstc.c b/arch/arm/mach-prima2/rstc.c index d074786e83d..492cfa8d261 100644 --- a/arch/arm/mach-prima2/rstc.c +++ b/arch/arm/mach-prima2/rstc.c @@ -19,6 +19,7 @@ static DEFINE_MUTEX(rstc_lock); static struct of_device_id rstc_ids[] = { { .compatible = "sirf,prima2-rstc" }, + {}, }; static int __init sirfsoc_of_rstc_init(void) diff --git a/arch/arm/mach-prima2/timer.c b/arch/arm/mach-prima2/timer.c index 44027f34a88..ed7ec48d11d 100644 --- a/arch/arm/mach-prima2/timer.c +++ b/arch/arm/mach-prima2/timer.c @@ -190,6 +190,7 @@ static void __init sirfsoc_timer_init(void) static struct of_device_id timer_ids[] = { { .compatible = "sirf,prima2-tick" }, + {}, }; static void __init sirfsoc_of_timer_map(void) diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h index a30f2e3ec17..6657ff23116 100644 --- a/arch/arm/mach-realview/include/mach/system.h +++ b/arch/arm/mach-realview/include/mach/system.h @@ -44,6 +44,7 @@ static inline void arch_reset(char mode, const char *cmd) */ if (realview_reset) realview_reset(mode); + dsb(); } #endif diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 7245a55795d..5261a7ed099 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -6,9 +6,7 @@ config CPU_S3C2410 bool depends on ARCH_S3C2410 select CPU_ARM920T - select S3C_GPIO_PULL_UP select S3C2410_CLOCK - select S3C2410_GPIO select CPU_LLSERIAL_S3C2410 select S3C2410_PM if PM select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX @@ -28,11 +26,6 @@ config S3C2410_PM help Power Management code common to S3C2410 and better -config S3C2410_GPIO - bool - help - GPIO code for S3C2410 and similar processors - config SIMTEC_NOR bool help diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 81695353d8f..782fd81144e 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_CPU_S3C2410) += s3c2410.o obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o -obj-$(CONFIG_S3C2410_GPIO) += gpio.o obj-$(CONFIG_S3C2410_CPUFREQ) += cpu-freq.o obj-$(CONFIG_S3C2410_PLLTABLE) += pll.o diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index 0d8e043804c..dbe43df8cfe 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -47,38 +47,26 @@ static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = { .channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID, .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID, .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_SPI0] = { .name = "spi0", .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, }, [DMACH_SPI1] = { .name = "spi1", .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT, }, [DMACH_UART0] = { .name = "uart0", .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, }, [DMACH_UART1] = { .name = "uart1", .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, }, [DMACH_UART2] = { .name = "uart2", .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, }, [DMACH_TIMER] = { .name = "timer", @@ -90,12 +78,10 @@ static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = { .name = "i2s-sdi", .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID, .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID, - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_I2S_OUT] = { .name = "i2s-sdo", .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_USB_EP1] = { .name = "usb-ep1", diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c deleted file mode 100644 index 9664e011dae..00000000000 --- a/arch/arm/mach-s3c2410/gpio.c +++ /dev/null @@ -1,72 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/gpio.c - * - * Copyright (c) 2004-2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 GPIO support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/gpio-fns.h> -#include <asm/irq.h> - -#include <mach/regs-gpio.h> - -int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, - unsigned int config) -{ - void __iomem *reg = S3C24XX_EINFLT0; - unsigned long flags; - unsigned long val; - - if (pin < S3C2410_GPG(8) || pin > S3C2410_GPG(15)) - return -EINVAL; - - config &= 0xff; - - pin -= S3C2410_GPG(8); - reg += pin & ~3; - - local_irq_save(flags); - - /* update filter width and clock source */ - - val = __raw_readl(reg); - val &= ~(0xff << ((pin & 3) * 8)); - val |= config << ((pin & 3) * 8); - __raw_writel(val, reg); - - /* update filter enable */ - - val = __raw_readl(S3C24XX_EXTINT2); - val &= ~(1 << ((pin * 4) + 3)); - val |= on << ((pin * 4) + 3); - __raw_writel(val, S3C24XX_EXTINT2); - - local_irq_restore(flags); - - return 0; -} - -EXPORT_SYMBOL(s3c2410_gpio_irqfilter); diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h index b2b2a5bb275..ae8e482b642 100644 --- a/arch/arm/mach-s3c2410/include/mach/dma.h +++ b/arch/arm/mach-s3c2410/include/mach/dma.h @@ -13,7 +13,6 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H __FILE__ -#include <plat/dma.h> #include <linux/sysdev.h> #define MAX_DMA_TRANSFER_SIZE 0x100000 /* Data Unit is half word */ @@ -51,6 +50,18 @@ enum dma_ch { DMACH_MAX, /* the end entry */ }; +static inline bool samsung_dma_has_circular(void) +{ + return false; +} + +static inline bool samsung_dma_is_dmadev(void) +{ + return false; +} + +#include <plat/dma.h> + #define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */ /* we have 4 dma channels */ @@ -163,7 +174,7 @@ struct s3c2410_dma_chan { struct s3c2410_dma_client *client; /* channel configuration */ - enum s3c2410_dmasrc source; + enum dma_data_direction source; enum dma_ch req_ch; unsigned long dev_addr; unsigned long load_timeout; @@ -196,9 +207,4 @@ struct s3c2410_dma_chan { typedef unsigned long dma_device_t; -static inline bool s3c_dma_has_circular(void) -{ - return false; -} - #endif /* __ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/fb.h b/arch/arm/mach-s3c2410/include/mach/fb.h index eee0654eb8f..a957bc8ed44 100644 --- a/arch/arm/mach-s3c2410/include/mach/fb.h +++ b/arch/arm/mach-s3c2410/include/mach/fb.h @@ -1,74 +1 @@ -/* arch/arm/mach-s3c2410/include/mach/fb.h - * - * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org> - * - * Inspired by pxafb.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARM_FB_H -#define __ASM_ARM_FB_H - -#include <mach/regs-lcd.h> - -struct s3c2410fb_hw { - unsigned long lcdcon1; - unsigned long lcdcon2; - unsigned long lcdcon3; - unsigned long lcdcon4; - unsigned long lcdcon5; -}; - -/* LCD description */ -struct s3c2410fb_display { - /* LCD type */ - unsigned type; - - /* Screen size */ - unsigned short width; - unsigned short height; - - /* Screen info */ - unsigned short xres; - unsigned short yres; - unsigned short bpp; - - unsigned pixclock; /* pixclock in picoseconds */ - unsigned short left_margin; /* value in pixels (TFT) or HCLKs (STN) */ - unsigned short right_margin; /* value in pixels (TFT) or HCLKs (STN) */ - unsigned short hsync_len; /* value in pixels (TFT) or HCLKs (STN) */ - unsigned short upper_margin; /* value in lines (TFT) or 0 (STN) */ - unsigned short lower_margin; /* value in lines (TFT) or 0 (STN) */ - unsigned short vsync_len; /* value in lines (TFT) or 0 (STN) */ - - /* lcd configuration registers */ - unsigned long lcdcon5; -}; - -struct s3c2410fb_mach_info { - - struct s3c2410fb_display *displays; /* attached diplays info */ - unsigned num_displays; /* number of defined displays */ - unsigned default_display; - - /* GPIOs */ - - unsigned long gpcup; - unsigned long gpcup_mask; - unsigned long gpccon; - unsigned long gpccon_mask; - unsigned long gpdup; - unsigned long gpdup_mask; - unsigned long gpdcon; - unsigned long gpdcon_mask; - - /* lpc3600 control register */ - unsigned long lpcsel; -}; - -extern void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *); - -#endif /* __ASM_ARM_FB_H */ +#include <plat/fb-s3c2410.h> diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h index bab13920176..c53ad34c657 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h @@ -1,98 +1 @@ -/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h - * - * Copyright (c) 2003-2009 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - hardware - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __MACH_GPIO_FNS_H -#define __MACH_GPIO_FNS_H __FILE__ - -/* These functions are in the to-be-removed category and it is strongly - * encouraged not to use these in new code. They will be marked deprecated - * very soon. - * - * Most of the functionality can be either replaced by the gpiocfg calls - * for the s3c platform or by the generic GPIOlib API. - * - * As of 2.6.35-rc, these will be removed, with the few drivers using them - * either replaced or given a wrapper until the calls can be removed. -*/ - -#include <plat/gpio-cfg.h> - -static inline void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int cfg) -{ - /* 1:1 mapping between cfgpin and setcfg calls at the moment */ - s3c_gpio_cfgpin(pin, cfg); -} - -/* external functions for GPIO support - * - * These allow various different clients to access the same GPIO - * registers without conflicting. If your driver only owns the entire - * GPIO register, then it is safe to ioremap/__raw_{read|write} to it. -*/ - -extern unsigned int s3c2410_gpio_getcfg(unsigned int pin); - -/* s3c2410_gpio_getirq - * - * turn the given pin number into the corresponding IRQ number - * - * returns: - * < 0 = no interrupt for this pin - * >=0 = interrupt number for the pin -*/ - -extern int s3c2410_gpio_getirq(unsigned int pin); - -/* s3c2410_gpio_irqfilter - * - * set the irq filtering on the given pin - * - * on = 0 => disable filtering - * 1 => enable filtering - * - * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with - * width of filter (0 through 63) - * - * -*/ - -extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, - unsigned int config); - -/* s3c2410_gpio_pullup - * - * This call should be replaced with s3c_gpio_setpull(). - * - * As a note, there is currently no distinction between pull-up and pull-down - * in the s3c24xx series devices with only an on/off configuration. - */ - -/* s3c2410_gpio_pullup - * - * configure the pull-up control on the given pin - * - * to = 1 => disable the pull-up - * 0 => enable the pull-up - * - * eg; - * - * s3c2410_gpio_pullup(S3C2410_GPB(0), 0); - * s3c2410_gpio_pullup(S3C2410_GPE(8), 0); -*/ - -extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to); - -extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to); - -extern unsigned int s3c2410_gpio_getpin(unsigned int pin); - -#endif /* __MACH_GPIO_FNS_H */ +#include <plat/gpio-fns.h> diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-track.h b/arch/arm/mach-s3c2410/include/mach/gpio-track.h index d67819dde42..c410a078622 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-track.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio-track.h @@ -17,11 +17,11 @@ #include <mach/regs-gpio.h> -extern struct s3c_gpio_chip s3c24xx_gpios[]; +extern struct samsung_gpio_chip s3c24xx_gpios[]; -static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin) +static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int pin) { - struct s3c_gpio_chip *chip; + struct samsung_gpio_chip *chip; if (pin > S3C_GPIO_END) return NULL; diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h index e5a68ea1311..e53b2177319 100644 --- a/arch/arm/mach-s3c2410/include/mach/irqs.h +++ b/arch/arm/mach-s3c2410/include/mach/irqs.h @@ -191,9 +191,9 @@ #define IRQ_LCD_SYSTEM IRQ_S3C2443_LCD2 #ifdef CONFIG_CPU_S3C2440 -#define IRQ_S3C244x_AC97 IRQ_S3C2440_AC97 +#define IRQ_S3C244X_AC97 IRQ_S3C2440_AC97 #else -#define IRQ_S3C244x_AC97 IRQ_S3C2443_AC97 +#define IRQ_S3C244X_AC97 IRQ_S3C2443_AC97 #endif /* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */ diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h index 425552d84b6..78ae807f128 100644 --- a/arch/arm/mach-s3c2410/include/mach/map.h +++ b/arch/arm/mach-s3c2410/include/mach/map.h @@ -14,9 +14,53 @@ #define __ASM_ARCH_MAP_H #include <plat/map-base.h> -#include <plat/map.h> -#define S3C2410_ADDR(x) S3C_ADDR(x) +/* + * S3C2410 UART offset is 0x4000 but the other SoCs are 0x400. + * So need to define it, and here is to avoid redefinition warning. + */ +#define S3C_UART_OFFSET (0x4000) + +#include <plat/map-s3c.h> + +/* + * interrupt controller is the first thing we put in, to make + * the assembly code for the irq detection easier + */ +#define S3C2410_PA_IRQ (0x4A000000) +#define S3C24XX_SZ_IRQ SZ_1M + +/* memory controller registers */ +#define S3C2410_PA_MEMCTRL (0x48000000) +#define S3C24XX_SZ_MEMCTRL SZ_1M + +/* UARTs */ +#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET))) + +/* Timers */ +#define S3C2410_PA_TIMER (0x51000000) +#define S3C24XX_SZ_TIMER SZ_1M + +/* Clock and Power management */ +#define S3C24XX_SZ_CLKPWR SZ_1M + +/* USB Device port */ +#define S3C2410_PA_USBDEV (0x52000000) +#define S3C24XX_SZ_USBDEV SZ_1M + +/* Watchdog */ +#define S3C2410_PA_WATCHDOG (0x53000000) +#define S3C24XX_SZ_WATCHDOG SZ_1M + +/* Standard size definitions for peripheral blocks. */ + +#define S3C24XX_SZ_UART SZ_1M +#define S3C24XX_SZ_IIS SZ_1M +#define S3C24XX_SZ_ADC SZ_1M +#define S3C24XX_SZ_SPI SZ_1M +#define S3C24XX_SZ_SDI SZ_1M +#define S3C24XX_SZ_NAND SZ_1M +#define S3C24XX_SZ_GPIO SZ_1M /* USB host controller */ #define S3C2410_PA_USBHOST (0x49000000) @@ -75,10 +119,8 @@ /* S3C2412 memory and IO controls */ #define S3C2412_PA_SSMC (0x4F000000) -#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000) #define S3C2412_PA_EBI (0x48800000) -#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00010000) /* physical addresses of all the chip-select areas */ @@ -100,15 +142,14 @@ #define S3C24XX_PA_DMA S3C2410_PA_DMA #define S3C24XX_PA_CLKPWR S3C2410_PA_CLKPWR #define S3C24XX_PA_LCD S3C2410_PA_LCD -#define S3C24XX_PA_UART S3C2410_PA_UART #define S3C24XX_PA_TIMER S3C2410_PA_TIMER #define S3C24XX_PA_USBDEV S3C2410_PA_USBDEV #define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG #define S3C24XX_PA_IIS S3C2410_PA_IIS -#define S3C24XX_PA_GPIO S3C2410_PA_GPIO #define S3C24XX_PA_RTC S3C2410_PA_RTC #define S3C24XX_PA_ADC S3C2410_PA_ADC #define S3C24XX_PA_SPI S3C2410_PA_SPI +#define S3C24XX_PA_SPI1 (S3C2410_PA_SPI + S3C2410_SPI1) #define S3C24XX_PA_SDI S3C2410_PA_SDI #define S3C24XX_PA_NAND S3C2410_PA_NAND diff --git a/arch/arm/mach-s3c2410/include/mach/pm-core.h b/arch/arm/mach-s3c2410/include/mach/pm-core.h index 45eea5210c8..2eef7e6f767 100644 --- a/arch/arm/mach-s3c2410/include/mach/pm-core.h +++ b/arch/arm/mach-s3c2410/include/mach/pm-core.h @@ -64,4 +64,4 @@ static inline void s3c_pm_arch_update_uart(void __iomem *regs, } static inline void s3c_pm_restored_gpios(void) { } -static inline void s3c_pm_saved_gpios(void) { } +static inline void samsung_pm_saved_gpios(void) { } diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h index 5e06c726583..df6434f326f 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h @@ -102,6 +102,7 @@ #define S3C2443_PCLKCON_UART3 (1<<3) #define S3C2443_PCLKCON_IIC (1<<4) #define S3C2443_PCLKCON_SDI (1<<5) +#define S3C2443_PCLKCON_HSSPI (1<<6) #define S3C2443_PCLKCON_ADC (1<<7) #define S3C2443_PCLKCON_AC97 (1<<8) #define S3C2443_PCLKCON_IIS (1<<9) diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 556c535829f..caa4ae29ec7 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -696,9 +696,9 @@ static void __init h1940_init(void) S3C2410_MISCCR_USBSUSPND0 | S3C2410_MISCCR_USBSUSPND1, 0x0); - tmp = (0x78 << S3C24XX_PLLCON_MDIVSHIFT) - | (0x02 << S3C24XX_PLLCON_PDIVSHIFT) - | (0x03 << S3C24XX_PLLCON_SDIVSHIFT); + tmp = (0x78 << S3C24XX_PLL_MDIV_SHIFT) + | (0x02 << S3C24XX_PLL_PDIV_SHIFT) + | (0x03 << S3C24XX_PLL_SDIV_SHIFT); writel(tmp, S3C2410_UPLLCON); gpio_request(S3C2410_GPC(0), "LCD power"); diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c index 367d376deb9..45185215625 100644 --- a/arch/arm/mach-s3c2410/mach-qt2410.c +++ b/arch/arm/mach-s3c2410/mach-qt2410.c @@ -49,6 +49,7 @@ #include <mach/regs-gpio.h> #include <mach/leds-gpio.h> +#include <mach/regs-lcd.h> #include <plat/regs-serial.h> #include <mach/fb.h> #include <plat/nand.h> diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c index f1d3bd8f6f1..a99c2f4a523 100644 --- a/arch/arm/mach-s3c2410/s3c2410.c +++ b/arch/arm/mach-s3c2410/s3c2410.c @@ -72,8 +72,8 @@ void __init s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no) void __init s3c2410_map_io(void) { - s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up; - s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up; + s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up; + s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up; iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc)); } diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig index c2cf4e56998..b8b9029e9f2 100644 --- a/arch/arm/mach-s3c2412/Kconfig +++ b/arch/arm/mach-s3c2412/Kconfig @@ -9,7 +9,6 @@ config CPU_S3C2412 select CPU_LLSERIAL_S3C2440 select S3C2412_PM if PM select S3C2412_DMA if S3C2410_DMA - select S3C2410_GPIO help Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile index 6c48a91ea39..7e4d95fa8a9 100644 --- a/arch/arm/mach-s3c2412/Makefile +++ b/arch/arm/mach-s3c2412/Makefile @@ -12,7 +12,6 @@ obj- := obj-$(CONFIG_CPU_S3C2412) += s3c2412.o obj-$(CONFIG_CPU_S3C2412) += irq.o obj-$(CONFIG_CPU_S3C2412) += clock.o -obj-$(CONFIG_CPU_S3C2412) += gpio.o obj-$(CONFIG_S3C2412_DMA) += dma.o obj-$(CONFIG_S3C2412_PM) += pm.o obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep.o diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c index 7abecfca0b7..d2a7d5ef3e6 100644 --- a/arch/arm/mach-s3c2412/dma.c +++ b/arch/arm/mach-s3c2412/dma.c @@ -50,64 +50,46 @@ static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = { .name = "sdi", .channels = MAP(S3C2412_DMAREQSEL_SDI), .channels_rx = MAP(S3C2412_DMAREQSEL_SDI), - .hw_addr.to = S3C2410_PA_SDI + S3C2410_SDIDATA, - .hw_addr.from = S3C2410_PA_SDI + S3C2410_SDIDATA, }, [DMACH_SPI0] = { .name = "spi0", .channels = MAP(S3C2412_DMAREQSEL_SPI0TX), .channels_rx = MAP(S3C2412_DMAREQSEL_SPI0RX), - .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, }, [DMACH_SPI1] = { .name = "spi1", .channels = MAP(S3C2412_DMAREQSEL_SPI1TX), .channels_rx = MAP(S3C2412_DMAREQSEL_SPI1RX), - .hw_addr.to = S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPRDAT, }, [DMACH_UART0] = { .name = "uart0", .channels = MAP(S3C2412_DMAREQSEL_UART0_0), .channels_rx = MAP(S3C2412_DMAREQSEL_UART0_0), - .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, }, [DMACH_UART1] = { .name = "uart1", .channels = MAP(S3C2412_DMAREQSEL_UART1_0), .channels_rx = MAP(S3C2412_DMAREQSEL_UART1_0), - .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, }, [DMACH_UART2] = { .name = "uart2", .channels = MAP(S3C2412_DMAREQSEL_UART2_0), .channels_rx = MAP(S3C2412_DMAREQSEL_UART2_0), - .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, }, [DMACH_UART0_SRC2] = { .name = "uart0", .channels = MAP(S3C2412_DMAREQSEL_UART0_1), .channels_rx = MAP(S3C2412_DMAREQSEL_UART0_1), - .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, }, [DMACH_UART1_SRC2] = { .name = "uart1", .channels = MAP(S3C2412_DMAREQSEL_UART1_1), .channels_rx = MAP(S3C2412_DMAREQSEL_UART1_1), - .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, }, [DMACH_UART2_SRC2] = { .name = "uart2", .channels = MAP(S3C2412_DMAREQSEL_UART2_1), .channels_rx = MAP(S3C2412_DMAREQSEL_UART2_1), - .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, }, [DMACH_TIMER] = { .name = "timer", @@ -148,11 +130,11 @@ static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = { static void s3c2412_dma_direction(struct s3c2410_dma_chan *chan, struct s3c24xx_dma_map *map, - enum s3c2410_dmasrc dir) + enum dma_data_direction dir) { unsigned long chsel; - if (dir == S3C2410_DMASRC_HW) + if (dir == DMA_FROM_DEVICE) chsel = map->channels_rx[0]; else chsel = map->channels[0]; diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c index 3404a876b33..4526f6ba31a 100644 --- a/arch/arm/mach-s3c2412/gpio.c +++ b/arch/arm/mach-s3c2412/gpio.c @@ -28,7 +28,7 @@ int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state) { - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); + struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); unsigned long offs = pin - chip->chip.base; unsigned long flags; unsigned long slpcon; diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig index 69b48a7d1db..84c7b03e5a3 100644 --- a/arch/arm/mach-s3c2416/Kconfig +++ b/arch/arm/mach-s3c2416/Kconfig @@ -13,7 +13,6 @@ config CPU_S3C2416 select CPU_ARM926T select S3C2416_DMA if S3C2410_DMA select CPU_LLSERIAL_S3C2440 - select S3C_GPIO_PULL_UPDOWN select SAMSUNG_CLKSRC select S3C2443_CLOCK help diff --git a/arch/arm/mach-s3c2416/clock.c b/arch/arm/mach-s3c2416/clock.c index 21a5e81f0ab..72b7c6274c7 100644 --- a/arch/arm/mach-s3c2416/clock.c +++ b/arch/arm/mach-s3c2416/clock.c @@ -21,7 +21,6 @@ #include <plat/cpu.h> #include <plat/cpu-freq.h> -#include <plat/pll6553x.h> #include <plat/pll.h> #include <asm/mach/map.h> @@ -38,6 +37,32 @@ static unsigned int armdiv[8] = { [7] = 8, }; +static struct clksrc_clk hsspi_eplldiv = { + .clk = { + .name = "hsspi-eplldiv", + .parent = &clk_esysclk.clk, + .ctrlbit = (1 << 14), + .enable = s3c2443_clkcon_enable_s, + }, + .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 24 }, +}; + +static struct clk *hsspi_sources[] = { + [0] = &hsspi_eplldiv.clk, + [1] = NULL, /* to fix */ +}; + +static struct clksrc_clk hsspi_mux = { + .clk = { + .name = "hsspi-if", + }, + .sources = &(struct clksrc_sources) { + .sources = hsspi_sources, + .nr_sources = ARRAY_SIZE(hsspi_sources), + }, + .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 18 }, +}; + static struct clksrc_clk hsmmc_div[] = { [0] = { .clk = { @@ -114,6 +139,8 @@ void __init_or_cpufreq s3c2416_setup_clocks(void) static struct clksrc_clk *clksrcs[] __initdata = { + &hsspi_eplldiv, + &hsspi_mux, &hsmmc_div[0], &hsmmc_div[1], &hsmmc_mux[0], diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c index 494ce913dc9..3156b7a7137 100644 --- a/arch/arm/mach-s3c2416/s3c2416.c +++ b/arch/arm/mach-s3c2416/s3c2416.c @@ -118,8 +118,8 @@ void __init s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no) void __init s3c2416_map_io(void) { - s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_updown; - s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_updown; + s3c24xx_gpiocfg_default.set_pull = samsung_gpio_setpull_updown; + s3c24xx_gpiocfg_default.get_pull = samsung_gpio_getpull_updown; /* initialize device information early */ s3c2416_default_sdhci0(); diff --git a/arch/arm/mach-s3c2416/setup-sdhci.c b/arch/arm/mach-s3c2416/setup-sdhci.c index ed34fad8f2c..cee53955eb0 100644 --- a/arch/arm/mach-s3c2416/setup-sdhci.c +++ b/arch/arm/mach-s3c2416/setup-sdhci.c @@ -12,17 +12,7 @@ * published by the Free Software Foundation. */ -#include <linux/kernel.h> #include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <linux/mmc/card.h> -#include <linux/mmc/host.h> - -#include <plat/regs-sdhci.h> -#include <plat/sdhci.h> /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ @@ -32,30 +22,3 @@ char *s3c2416_hsmmc_clksrcs[4] = { [2] = "hsmmc-if", /* [3] = "48m", - note not successfully used yet */ }; - -void s3c2416_setup_sdhci_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card) -{ - u32 ctrl2, ctrl3; - - ctrl2 = __raw_readl(r + S3C_SDHCI_CONTROL2); - ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK; - ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR | - S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK | - S3C_SDHCI_CTRL2_ENFBCLKRX | - S3C_SDHCI_CTRL2_DFCNT_NONE | - S3C_SDHCI_CTRL2_ENCLKOUTHOLD); - - if (ios->clock < 25 * 1000000) - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 | - S3C_SDHCI_CTRL3_FCSEL2 | - S3C_SDHCI_CTRL3_FCSEL1 | - S3C_SDHCI_CTRL3_FCSEL0); - else - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0); - - __raw_writel(ctrl2, r + S3C_SDHCI_CONTROL2); - __raw_writel(ctrl3, r + S3C_SDHCI_CONTROL3); -} diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index 50825a3f91c..914e620f125 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -5,10 +5,8 @@ config CPU_S3C2440 bool select CPU_ARM920T - select S3C_GPIO_PULL_UP select S3C2410_CLOCK select S3C2410_PM if PM - select S3C2410_GPIO select S3C2440_DMA if S3C2410_DMA select CPU_S3C244X select CPU_LLSERIAL_S3C2440 @@ -18,9 +16,7 @@ config CPU_S3C2440 config CPU_S3C2442 bool select CPU_ARM920T - select S3C_GPIO_PULL_DOWN select S3C2410_CLOCK - select S3C2410_GPIO select S3C2410_PM if PM select CPU_S3C244X select CPU_LLSERIAL_S3C2440 diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c index 3b0529f54e9..0e73f8f9d13 100644 --- a/arch/arm/mach-s3c2440/dma.c +++ b/arch/arm/mach-s3c2440/dma.c @@ -48,38 +48,26 @@ static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = { .channels[1] = S3C2440_DCON_CH1_SDI | DMA_CH_VALID, .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID, .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_SPI0] = { .name = "spi0", .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, }, [DMACH_SPI1] = { .name = "spi1", .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT, }, [DMACH_UART0] = { .name = "uart0", .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, }, [DMACH_UART1] = { .name = "uart1", .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, }, [DMACH_UART2] = { .name = "uart2", .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, }, [DMACH_TIMER] = { .name = "timer", @@ -91,31 +79,26 @@ static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = { .name = "i2s-sdi", .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID, .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID, - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_I2S_OUT] = { .name = "i2s-sdo", .channels[0] = S3C2440_DCON_CH0_I2SSDO | DMA_CH_VALID, .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_PCM_IN] = { .name = "pcm-in", .channels[0] = S3C2440_DCON_CH0_PCMIN | DMA_CH_VALID, .channels[2] = S3C2440_DCON_CH2_PCMIN | DMA_CH_VALID, - .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA, }, [DMACH_PCM_OUT] = { .name = "pcm-out", .channels[1] = S3C2440_DCON_CH1_PCMOUT | DMA_CH_VALID, .channels[3] = S3C2440_DCON_CH3_PCMOUT | DMA_CH_VALID, - .hw_addr.to = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA, }, [DMACH_MIC_IN] = { .name = "mic-in", .channels[2] = S3C2440_DCON_CH2_MICIN | DMA_CH_VALID, .channels[3] = S3C2440_DCON_CH3_MICIN | DMA_CH_VALID, - .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_MIC_DATA, }, [DMACH_USB_EP1] = { .name = "usb-ep1", diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c index 684dbb3567f..0d3453bf567 100644 --- a/arch/arm/mach-s3c2440/mach-rx1950.c +++ b/arch/arm/mach-s3c2440/mach-rx1950.c @@ -43,6 +43,7 @@ #include <mach/regs-gpio.h> #include <mach/regs-gpioj.h> +#include <mach/regs-lcd.h> #include <mach/h1940.h> #include <mach/fb.h> diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c index ce99ff72838..fc84e481efc 100644 --- a/arch/arm/mach-s3c2440/s3c2440.c +++ b/arch/arm/mach-s3c2440/s3c2440.c @@ -68,6 +68,6 @@ void __init s3c2440_map_io(void) { s3c244x_map_io(); - s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up; - s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up; + s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up; + s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up; } diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c index 9ad99f8016a..48e273ce9f9 100644 --- a/arch/arm/mach-s3c2440/s3c2442.c +++ b/arch/arm/mach-s3c2440/s3c2442.c @@ -180,6 +180,6 @@ void __init s3c2442_map_io(void) { s3c244x_map_io(); - s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1down; - s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1down; + s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1down; + s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1down; } diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig index d8eb86823df..8814031516c 100644 --- a/arch/arm/mach-s3c2443/Kconfig +++ b/arch/arm/mach-s3c2443/Kconfig @@ -10,7 +10,6 @@ config CPU_S3C2443 select CPU_LLSERIAL_S3C2440 select SAMSUNG_CLKSRC select S3C2443_CLOCK - select S3C_GPIO_PULL_S3C2443 help Support for the S3C2443 SoC from the S3C24XX line diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c index a1a7176675b..cd51d04e1de 100644 --- a/arch/arm/mach-s3c2443/clock.c +++ b/arch/arm/mach-s3c2443/clock.c @@ -57,10 +57,6 @@ /* clock selections */ -static struct clk clk_i2s_ext = { - .name = "i2s-ext", -}; - /* armdiv * * this clock is sourced from msysclk and can have a number of @@ -128,7 +124,7 @@ static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate) unsigned long clkcon0; clkcon0 = __raw_readl(S3C2443_CLKDIV0); - clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK; + clkcon0 &= ~S3C2443_CLKDIV0_ARMDIV_MASK; clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT; __raw_writel(clkcon0, S3C2443_CLKDIV0); } @@ -173,7 +169,7 @@ static struct clksrc_clk clk_arm = { static struct clksrc_clk clk_hsspi = { .clk = { - .name = "hsspi", + .name = "hsspi-if", .parent = &clk_esysclk.clk, .ctrlbit = S3C2443_SCLKCON_HSSPICLK, .enable = s3c2443_clkcon_enable_s, @@ -235,48 +231,6 @@ static struct clk clk_hsmmc = { }, }; -/* i2s_eplldiv - * - * This clock is the output from the I2S divisor of ESYSCLK, and is separate - * from the mux that comes after it (cannot merge into one single clock) -*/ - -static struct clksrc_clk clk_i2s_eplldiv = { - .clk = { - .name = "i2s-eplldiv", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, }, -}; - -/* i2s-ref - * - * i2s bus reference clock, selectable from external, esysclk or epllref - * - * Note, this used to be two clocks, but was compressed into one. -*/ - -struct clk *clk_i2s_srclist[] = { - [0] = &clk_i2s_eplldiv.clk, - [1] = &clk_i2s_ext, - [2] = &clk_epllref.clk, - [3] = &clk_epllref.clk, -}; - -static struct clksrc_clk clk_i2s = { - .clk = { - .name = "i2s-if", - .ctrlbit = S3C2443_SCLKCON_I2SCLK, - .enable = s3c2443_clkcon_enable_s, - - }, - .sources = &(struct clksrc_sources) { - .sources = clk_i2s_srclist, - .nr_sources = ARRAY_SIZE(clk_i2s_srclist), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 }, -}; - /* standard clock definitions */ static struct clk init_clocks_off[] = { @@ -286,11 +240,6 @@ static struct clk init_clocks_off[] = { .enable = s3c2443_clkcon_enable_p, .ctrlbit = S3C2443_PCLKCON_SDI, }, { - .name = "iis", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_IIS, - }, { .name = "spi", .devname = "s3c2410-spi.0", .parent = &clk_p, @@ -312,8 +261,6 @@ static struct clk init_clocks[] = { static struct clksrc_clk *clksrcs[] __initdata = { &clk_arm, - &clk_i2s_eplldiv, - &clk_i2s, &clk_hsspi, &clk_hsmmc_div, }; diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c index 3f658685ec1..fe52151d2e8 100644 --- a/arch/arm/mach-s3c2443/dma.c +++ b/arch/arm/mach-s3c2443/dma.c @@ -54,68 +54,46 @@ static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = { [DMACH_SDI] = { .name = "sdi", .channels = MAP(S3C2443_DMAREQSEL_SDI), - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_SPI0] = { .name = "spi0", .channels = MAP(S3C2443_DMAREQSEL_SPI0TX), - .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, }, [DMACH_SPI1] = { .name = "spi1", .channels = MAP(S3C2443_DMAREQSEL_SPI1TX), - .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT, }, [DMACH_UART0] = { .name = "uart0", .channels = MAP(S3C2443_DMAREQSEL_UART0_0), - .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, }, [DMACH_UART1] = { .name = "uart1", .channels = MAP(S3C2443_DMAREQSEL_UART1_0), - .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, }, [DMACH_UART2] = { .name = "uart2", .channels = MAP(S3C2443_DMAREQSEL_UART2_0), - .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, }, [DMACH_UART3] = { .name = "uart3", .channels = MAP(S3C2443_DMAREQSEL_UART3_0), - .hw_addr.to = S3C2443_PA_UART3 + S3C2410_UTXH, - .hw_addr.from = S3C2443_PA_UART3 + S3C2410_URXH, }, [DMACH_UART0_SRC2] = { .name = "uart0", .channels = MAP(S3C2443_DMAREQSEL_UART0_1), - .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, }, [DMACH_UART1_SRC2] = { .name = "uart1", .channels = MAP(S3C2443_DMAREQSEL_UART1_1), - .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, }, [DMACH_UART2_SRC2] = { .name = "uart2", .channels = MAP(S3C2443_DMAREQSEL_UART2_1), - .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, }, [DMACH_UART3_SRC2] = { .name = "uart3", .channels = MAP(S3C2443_DMAREQSEL_UART3_1), - .hw_addr.to = S3C2443_PA_UART3 + S3C2410_UTXH, - .hw_addr.from = S3C2443_PA_UART3 + S3C2410_URXH, }, [DMACH_TIMER] = { .name = "timer", @@ -124,27 +102,22 @@ static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = { [DMACH_I2S_IN] = { .name = "i2s-sdi", .channels = MAP(S3C2443_DMAREQSEL_I2SRX), - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_I2S_OUT] = { .name = "i2s-sdo", .channels = MAP(S3C2443_DMAREQSEL_I2STX), - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_PCM_IN] = { .name = "pcm-in", .channels = MAP(S3C2443_DMAREQSEL_PCMIN), - .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA, }, [DMACH_PCM_OUT] = { .name = "pcm-out", .channels = MAP(S3C2443_DMAREQSEL_PCMOUT), - .hw_addr.to = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA, }, [DMACH_MIC_IN] = { .name = "mic-in", .channels = MAP(S3C2443_DMAREQSEL_MICIN), - .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_MIC_DATA, }, }; diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c index e6a28ba52c7..5df6458ddd4 100644 --- a/arch/arm/mach-s3c2443/s3c2443.c +++ b/arch/arm/mach-s3c2443/s3c2443.c @@ -90,8 +90,8 @@ void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no) void __init s3c2443_map_io(void) { - s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_s3c2443; - s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_s3c2443; + s3c24xx_gpiocfg_default.set_pull = s3c2443_gpio_setpull; + s3c24xx_gpiocfg_default.get_pull = s3c2443_gpio_getpull; iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc)); } diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index f057b6ae4f9..5552e048c2b 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -288,5 +288,6 @@ config MACH_WLF_CRAGG_6410 select S3C_DEV_RTC select S3C64XX_DEV_SPI select S3C24XX_GPIO_EXTRA128 + select I2C help Machine support for the Wolfson Cragganmore S3C6410 variant. diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile index 61b4034a0c2..cfc0b994180 100644 --- a/arch/arm/mach-s3c64xx/Makefile +++ b/arch/arm/mach-s3c64xx/Makefile @@ -13,7 +13,6 @@ obj- := # Core files obj-y += cpu.o obj-y += clock.o -obj-y += gpiolib.o # Core support for S3C6400 system @@ -55,12 +54,10 @@ obj-$(CONFIG_MACH_HMT) += mach-hmt.o obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o -obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o +obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o # device support obj-y += dev-uart.o obj-y += dev-audio.o obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o -obj-$(CONFIG_S3C64XX_DEV_TS) += dev-ts.o -obj-$(CONFIG_S3C64XX_DEV_ONENAND1) += dev-onenand1.o diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c index 8cf39e33579..39c238d7a3d 100644 --- a/arch/arm/mach-s3c64xx/clock.c +++ b/arch/arm/mach-s3c64xx/clock.c @@ -25,13 +25,13 @@ #include <mach/regs-sys.h> #include <mach/regs-clock.h> -#include <mach/pll.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/cpu-freq.h> #include <plat/clock.h> #include <plat/clock-clksrc.h> +#include <plat/pll.h> /* fin_apll, fin_mpll and fin_epll are all the same clock, which we call * ext_xtal_mux for want of an actual name from the manual. @@ -735,7 +735,8 @@ void __init_or_cpufreq s3c6400_setup_clocks(void) /* For now assume the mux always selects the crystal */ clk_ext_xtal_mux.parent = xtal_clk; - epll = s3c6400_get_epll(xtal); + epll = s3c_get_pll6553x(xtal, __raw_readl(S3C_EPLL_CON0), + __raw_readl(S3C_EPLL_CON1)); mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON)); apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON)); @@ -744,7 +745,13 @@ void __init_or_cpufreq s3c6400_setup_clocks(void) printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n", apll, mpll, epll); - hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2); + if(__raw_readl(S3C64XX_OTHERS) & S3C64XX_OTHERS_SYNCMUXSEL) + /* Synchronous mode */ + hclk2 = apll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2); + else + /* Asynchronous mode */ + hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2); + hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK); pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK); diff --git a/arch/arm/mach-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c index 8dc05763a7e..de085b798aa 100644 --- a/arch/arm/mach-s3c64xx/cpu.c +++ b/arch/arm/mach-s3c64xx/cpu.c @@ -34,8 +34,8 @@ #include <plat/devs.h> #include <plat/clock.h> -#include <mach/s3c6400.h> -#include <mach/s3c6410.h> +#include <plat/s3c6400.h> +#include <plat/s3c6410.h> /* table of supported CPUs */ @@ -44,16 +44,16 @@ static const char name_s3c6410[] = "S3C6410"; static struct cpu_table cpu_ids[] __initdata = { { - .idcode = 0x36400000, - .idmask = 0xfffff000, + .idcode = S3C6400_CPU_ID, + .idmask = S3C64XX_CPU_MASK, .map_io = s3c6400_map_io, .init_clocks = s3c6400_init_clocks, .init_uarts = s3c6400_init_uarts, .init = s3c6400_init, .name = name_s3c6400, }, { - .idcode = 0x36410100, - .idmask = 0xffffff00, + .idcode = S3C6410_CPU_ID, + .idmask = S3C64XX_CPU_MASK, .map_io = s3c6410_map_io, .init_clocks = s3c6410_init_clocks, .init_uarts = s3c6410_init_uarts, @@ -141,23 +141,15 @@ void __init s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) void __init s3c64xx_init_io(struct map_desc *mach_desc, int size) { - unsigned long idcode; - /* initialise the io descriptors we need for initialisation */ iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc)); iotable_init(mach_desc, size); init_consistent_dma_size(SZ_8M); - idcode = __raw_readl(S3C_VA_SYS + 0x118); - if (!idcode) { - /* S3C6400 has the ID register in a different place, - * and needs a write before it can be read. */ - - __raw_writel(0x0, S3C_VA_SYS + 0xA1C); - idcode = __raw_readl(S3C_VA_SYS + 0xA1C); - } + /* detect cpu id */ + s3c64xx_init_cpu(); - s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids)); + s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); } static __init int s3c64xx_sysdev_init(void) diff --git a/arch/arm/mach-s3c64xx/dev-onenand1.c b/arch/arm/mach-s3c64xx/dev-onenand1.c deleted file mode 100644 index 999f9e17a1e..00000000000 --- a/arch/arm/mach-s3c64xx/dev-onenand1.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * linux/arch/arm/mach-s3c64xx/dev-onenand1.c - * - * Copyright (c) 2008-2010 Samsung Electronics - * Kyungmin Park <kyungmin.park@samsung.com> - * - * S3C64XX series device definition for OneNAND devices - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/onenand.h> - -#include <mach/irqs.h> -#include <mach/map.h> - -#include <plat/devs.h> - -static struct resource s3c64xx_onenand1_resources[] = { - [0] = { - .start = S3C64XX_PA_ONENAND1, - .end = S3C64XX_PA_ONENAND1 + 0x400 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = S3C64XX_PA_ONENAND1_BUF, - .end = S3C64XX_PA_ONENAND1_BUF + S3C64XX_SZ_ONENAND1_BUF - 1, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = IRQ_ONENAND1, - .end = IRQ_ONENAND1, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device s3c64xx_device_onenand1 = { - .name = "samsung-onenand", - .id = 1, - .num_resources = ARRAY_SIZE(s3c64xx_onenand1_resources), - .resource = s3c64xx_onenand1_resources, -}; - -void s3c64xx_onenand1_set_platdata(struct onenand_platform_data *pdata) -{ - s3c_set_platdata(pdata, sizeof(struct onenand_platform_data), - &s3c64xx_device_onenand1); -} diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c index 204bfafe4bf..17d62f4f820 100644 --- a/arch/arm/mach-s3c64xx/dma.c +++ b/arch/arm/mach-s3c64xx/dma.c @@ -147,14 +147,14 @@ static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan, u32 control0, control1; switch (chan->source) { - case S3C2410_DMASRC_HW: + case DMA_FROM_DEVICE: src = chan->dev_addr; dst = data; control0 = PL080_CONTROL_SRC_AHB2; control0 |= PL080_CONTROL_DST_INCR; break; - case S3C2410_DMASRC_MEM: + case DMA_TO_DEVICE: src = data; dst = chan->dev_addr; control0 = PL080_CONTROL_DST_AHB2; @@ -416,7 +416,7 @@ EXPORT_SYMBOL(s3c2410_dma_enqueue); int s3c2410_dma_devconfig(enum dma_ch channel, - enum s3c2410_dmasrc source, + enum dma_data_direction source, unsigned long devaddr) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -437,11 +437,11 @@ int s3c2410_dma_devconfig(enum dma_ch channel, pr_debug("%s: peripheral %d\n", __func__, peripheral); switch (source) { - case S3C2410_DMASRC_HW: + case DMA_FROM_DEVICE: config = 2 << PL080_CONFIG_FLOW_CONTROL_SHIFT; config |= peripheral << PL080_CONFIG_SRC_SEL_SHIFT; break; - case S3C2410_DMASRC_MEM: + case DMA_TO_DEVICE: config = 1 << PL080_CONFIG_FLOW_CONTROL_SHIFT; config |= peripheral << PL080_CONFIG_DST_SEL_SHIFT; break; @@ -740,7 +740,7 @@ static int __init s3c64xx_dma_init(void) } /* Set all DMA configuration to be DMA, not SDMA */ - writel(0xffffff, S3C_SYSREG(0x110)); + writel(0xffffff, S3C64XX_SDMA_SEL); /* Register standard DMA controllers */ s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000); diff --git a/arch/arm/mach-s3c64xx/gpiolib.c b/arch/arm/mach-s3c64xx/gpiolib.c deleted file mode 100644 index 92b09085caa..00000000000 --- a/arch/arm/mach-s3c64xx/gpiolib.c +++ /dev/null @@ -1,290 +0,0 @@ -/* arch/arm/plat-s3c64xx/gpiolib.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX - GPIOlib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/gpio.h> - -#include <mach/map.h> - -#include <plat/gpio-core.h> -#include <plat/gpio-cfg.h> -#include <plat/gpio-cfg-helpers.h> -#include <mach/regs-gpio.h> - -/* GPIO bank summary: - * - * Bank GPIOs Style SlpCon ExtInt Group - * A 8 4Bit Yes 1 - * B 7 4Bit Yes 1 - * C 8 4Bit Yes 2 - * D 5 4Bit Yes 3 - * E 5 4Bit Yes None - * F 16 2Bit Yes 4 [1] - * G 7 4Bit Yes 5 - * H 10 4Bit[2] Yes 6 - * I 16 2Bit Yes None - * J 12 2Bit Yes None - * K 16 4Bit[2] No None - * L 15 4Bit[2] No None - * M 6 4Bit No IRQ_EINT - * N 16 2Bit No IRQ_EINT - * O 16 2Bit Yes 7 - * P 15 2Bit Yes 8 - * Q 9 2Bit Yes 9 - * - * [1] BANKF pins 14,15 do not form part of the external interrupt sources - * [2] BANK has two control registers, GPxCON0 and GPxCON1 - */ - -static struct s3c_gpio_cfg gpio_4bit_cfg_noint = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .get_config = s3c_gpio_getcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_4bit_cfg_eint0111 = { - .cfg_eint = 7, - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .get_config = s3c_gpio_getcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = { - .cfg_eint = 3, - .get_config = s3c_gpio_getcfg_s3c64xx_4bit, - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin) -{ - return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO; -} - -static struct s3c_gpio_chip gpio_4bit[] = { - { - .base = S3C64XX_GPA_BASE, - .config = &gpio_4bit_cfg_eint0111, - .chip = { - .base = S3C64XX_GPA(0), - .ngpio = S3C64XX_GPIO_A_NR, - .label = "GPA", - }, - }, { - .base = S3C64XX_GPB_BASE, - .config = &gpio_4bit_cfg_eint0111, - .chip = { - .base = S3C64XX_GPB(0), - .ngpio = S3C64XX_GPIO_B_NR, - .label = "GPB", - }, - }, { - .base = S3C64XX_GPC_BASE, - .config = &gpio_4bit_cfg_eint0111, - .chip = { - .base = S3C64XX_GPC(0), - .ngpio = S3C64XX_GPIO_C_NR, - .label = "GPC", - }, - }, { - .base = S3C64XX_GPD_BASE, - .config = &gpio_4bit_cfg_eint0111, - .chip = { - .base = S3C64XX_GPD(0), - .ngpio = S3C64XX_GPIO_D_NR, - .label = "GPD", - }, - }, { - .base = S3C64XX_GPE_BASE, - .config = &gpio_4bit_cfg_noint, - .chip = { - .base = S3C64XX_GPE(0), - .ngpio = S3C64XX_GPIO_E_NR, - .label = "GPE", - }, - }, { - .base = S3C64XX_GPG_BASE, - .config = &gpio_4bit_cfg_eint0111, - .chip = { - .base = S3C64XX_GPG(0), - .ngpio = S3C64XX_GPIO_G_NR, - .label = "GPG", - }, - }, { - .base = S3C64XX_GPM_BASE, - .config = &gpio_4bit_cfg_eint0011, - .chip = { - .base = S3C64XX_GPM(0), - .ngpio = S3C64XX_GPIO_M_NR, - .label = "GPM", - .to_irq = s3c64xx_gpio2int_gpm, - }, - }, -}; - -static int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin) -{ - return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO; -} - -static struct s3c_gpio_chip gpio_4bit2[] = { - { - .base = S3C64XX_GPH_BASE + 0x4, - .config = &gpio_4bit_cfg_eint0111, - .chip = { - .base = S3C64XX_GPH(0), - .ngpio = S3C64XX_GPIO_H_NR, - .label = "GPH", - }, - }, { - .base = S3C64XX_GPK_BASE + 0x4, - .config = &gpio_4bit_cfg_noint, - .chip = { - .base = S3C64XX_GPK(0), - .ngpio = S3C64XX_GPIO_K_NR, - .label = "GPK", - }, - }, { - .base = S3C64XX_GPL_BASE + 0x4, - .config = &gpio_4bit_cfg_eint0011, - .chip = { - .base = S3C64XX_GPL(0), - .ngpio = S3C64XX_GPIO_L_NR, - .label = "GPL", - .to_irq = s3c64xx_gpio2int_gpl, - }, - }, -}; - -static struct s3c_gpio_cfg gpio_2bit_cfg_noint = { - .set_config = s3c_gpio_setcfg_s3c24xx, - .get_config = s3c_gpio_getcfg_s3c24xx, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = { - .cfg_eint = 2, - .set_config = s3c_gpio_setcfg_s3c24xx, - .get_config = s3c_gpio_getcfg_s3c24xx, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = { - .cfg_eint = 3, - .set_config = s3c_gpio_setcfg_s3c24xx, - .get_config = s3c_gpio_getcfg_s3c24xx, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_chip gpio_2bit[] = { - { - .base = S3C64XX_GPF_BASE, - .config = &gpio_2bit_cfg_eint11, - .chip = { - .base = S3C64XX_GPF(0), - .ngpio = S3C64XX_GPIO_F_NR, - .label = "GPF", - }, - }, { - .base = S3C64XX_GPI_BASE, - .config = &gpio_2bit_cfg_noint, - .chip = { - .base = S3C64XX_GPI(0), - .ngpio = S3C64XX_GPIO_I_NR, - .label = "GPI", - }, - }, { - .base = S3C64XX_GPJ_BASE, - .config = &gpio_2bit_cfg_noint, - .chip = { - .base = S3C64XX_GPJ(0), - .ngpio = S3C64XX_GPIO_J_NR, - .label = "GPJ", - }, - }, { - .base = S3C64XX_GPN_BASE, - .irq_base = IRQ_EINT(0), - .config = &gpio_2bit_cfg_eint10, - .chip = { - .base = S3C64XX_GPN(0), - .ngpio = S3C64XX_GPIO_N_NR, - .label = "GPN", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = S3C64XX_GPO_BASE, - .config = &gpio_2bit_cfg_eint11, - .chip = { - .base = S3C64XX_GPO(0), - .ngpio = S3C64XX_GPIO_O_NR, - .label = "GPO", - }, - }, { - .base = S3C64XX_GPP_BASE, - .config = &gpio_2bit_cfg_eint11, - .chip = { - .base = S3C64XX_GPP(0), - .ngpio = S3C64XX_GPIO_P_NR, - .label = "GPP", - }, - }, { - .base = S3C64XX_GPQ_BASE, - .config = &gpio_2bit_cfg_eint11, - .chip = { - .base = S3C64XX_GPQ(0), - .ngpio = S3C64XX_GPIO_Q_NR, - .label = "GPQ", - }, - }, -}; - -static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip) -{ - chip->pm = __gpio_pm(&s3c_gpio_pm_2bit); -} - -static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips, - int nr_chips, - void (*fn)(struct s3c_gpio_chip *)) -{ - for (; nr_chips > 0; nr_chips--, chips++) { - if (fn) - (fn)(chips); - s3c_gpiolib_add(chips); - } -} - -static __init int s3c64xx_gpiolib_init(void) -{ - s3c64xx_gpiolib_add(gpio_4bit, ARRAY_SIZE(gpio_4bit), - samsung_gpiolib_add_4bit); - - s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2), - samsung_gpiolib_add_4bit2); - - s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit), - s3c64xx_gpiolib_add_2bit); - - return 0; -} - -core_initcall(s3c64xx_gpiolib_init); diff --git a/arch/arm/mach-s3c64xx/include/mach/clkdev.h b/arch/arm/mach-s3c64xx/include/mach/clkdev.h deleted file mode 100644 index 7dffa83d23f..00000000000 --- a/arch/arm/mach-s3c64xx/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __MACH_CLKDEV_H__ -#define __MACH_CLKDEV_H__ - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do {} while (0) - -#endif diff --git a/arch/arm/mach-s3c64xx/include/mach/crag6410.h b/arch/arm/mach-s3c64xx/include/mach/crag6410.h new file mode 100644 index 00000000000..be9074e17df --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/crag6410.h @@ -0,0 +1,23 @@ +/* Cragganmore 6410 shared definitions + * + * Copyright 2011 Wolfson Microelectronics plc + * Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef MACH_CRAG6410_H +#define MACH_CRAG6410_H + +#include <linux/gpio.h> + +#define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START +#define GLENFARCLAS_PMIC_IRQ_BASE (IRQ_BOARD_START + 64) + +#define PCA935X_GPIO_BASE GPIO_BOARD_START +#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8) +#define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 16) + +#endif diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h index 0a5d9268a23..fe1a98cf0e4 100644 --- a/arch/arm/mach-s3c64xx/include/mach/dma.h +++ b/arch/arm/mach-s3c64xx/include/mach/dma.h @@ -58,11 +58,15 @@ enum dma_ch { DMACH_MAX /* the end */ }; -static __inline__ bool s3c_dma_has_circular(void) +static inline bool samsung_dma_has_circular(void) { return true; } +static inline bool samsung_dma_is_dmadev(void) +{ + return false; +} #define S3C2410_DMAF_CIRCULAR (1 << 0) #include <plat/dma.h> @@ -95,7 +99,7 @@ struct s3c2410_dma_chan { unsigned char peripheral; unsigned int flags; - enum s3c2410_dmasrc source; + enum dma_data_direction source; dma_addr_t dev_addr; diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h index a1f13f02c84..23a1d71e4d5 100644 --- a/arch/arm/mach-s3c64xx/include/mach/map.h +++ b/arch/arm/mach-s3c64xx/include/mach/map.h @@ -16,6 +16,7 @@ #define __ASM_ARCH_MAP_H __FILE__ #include <plat/map-base.h> +#include <plat/map-s3c.h> /* * Post-mux Chip Select Regions Xm0CSn_ @@ -83,7 +84,6 @@ #define S3C64XX_PA_IIC1 (0x7F00F000) #define S3C64XX_PA_GPIO (0x7F008000) -#define S3C64XX_VA_GPIO S3C_ADDR_CPU(0x00000000) #define S3C64XX_SZ_GPIO SZ_4K #define S3C64XX_PA_SDRAM (0x50000000) @@ -94,16 +94,10 @@ #define S3C64XX_PA_VIC1 (0x71300000) #define S3C64XX_PA_MODEM (0x74108000) -#define S3C64XX_VA_MODEM S3C_ADDR_CPU(0x00100000) #define S3C64XX_PA_USBHOST (0x74300000) #define S3C64XX_PA_USB_HSPHY (0x7C100000) -#define S3C64XX_VA_USB_HSPHY S3C_ADDR_CPU(0x00200000) - -/* place VICs close together */ -#define VA_VIC0 (S3C_VA_IRQ + 0x00) -#define VA_VIC1 (S3C_VA_IRQ + 0x10000) /* compatibiltiy defines. */ #define S3C_PA_TIMER S3C64XX_PA_TIMER @@ -119,7 +113,6 @@ #define S3C_PA_FB S3C64XX_PA_FB #define S3C_PA_USBHOST S3C64XX_PA_USBHOST #define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG -#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY #define S3C_PA_RTC S3C64XX_PA_RTC #define S3C_PA_WDT S3C64XX_PA_WATCHDOG diff --git a/arch/arm/mach-s3c64xx/include/mach/pll.h b/arch/arm/mach-s3c64xx/include/mach/pll.h deleted file mode 100644 index 5ef0bb698ee..00000000000 --- a/arch/arm/mach-s3c64xx/include/mach/pll.h +++ /dev/null @@ -1,45 +0,0 @@ -/* arch/arm/plat-s3c64xx/include/plat/pll.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX PLL code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C6400_PLL_MDIV_MASK ((1 << (25-16+1)) - 1) -#define S3C6400_PLL_PDIV_MASK ((1 << (13-8+1)) - 1) -#define S3C6400_PLL_SDIV_MASK ((1 << (2-0+1)) - 1) -#define S3C6400_PLL_MDIV_SHIFT (16) -#define S3C6400_PLL_PDIV_SHIFT (8) -#define S3C6400_PLL_SDIV_SHIFT (0) - -#include <asm/div64.h> -#include <plat/pll6553x.h> - -static inline unsigned long s3c6400_get_pll(unsigned long baseclk, - u32 pllcon) -{ - u32 mdiv, pdiv, sdiv; - u64 fvco = baseclk; - - mdiv = (pllcon >> S3C6400_PLL_MDIV_SHIFT) & S3C6400_PLL_MDIV_MASK; - pdiv = (pllcon >> S3C6400_PLL_PDIV_SHIFT) & S3C6400_PLL_PDIV_MASK; - sdiv = (pllcon >> S3C6400_PLL_SDIV_SHIFT) & S3C6400_PLL_SDIV_MASK; - - fvco *= mdiv; - do_div(fvco, (pdiv << sdiv)); - - return (unsigned long)fvco; -} - -static inline unsigned long s3c6400_get_epll(unsigned long baseclk) -{ - return s3c_get_pll6553x(baseclk, __raw_readl(S3C_EPLL_CON0), - __raw_readl(S3C_EPLL_CON1)); -} diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h index 38659bebe4b..fcf3dcabb69 100644 --- a/arch/arm/mach-s3c64xx/include/mach/pm-core.h +++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h @@ -104,7 +104,7 @@ static inline void s3c_pm_restored_gpios(void) __raw_writel(0, S3C64XX_SLPEN); } -static inline void s3c_pm_saved_gpios(void) +static inline void samsung_pm_saved_gpios(void) { /* turn on the sleep mode and keep it there, as it seems that during * suspend the xCON registers get re-set and thus you can end up with diff --git a/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h b/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h deleted file mode 100644 index b25bedee0d5..00000000000 --- a/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h +++ /dev/null @@ -1,56 +0,0 @@ -/* linux/arch/arm/mach-s3c6400/include/mach/pwm-clock.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64xx - pwm clock and timer support - */ - -/** - * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk - * @tcfg: The timer TCFG1 register bits shifted down to 0. - * - * Return true if the given configuration from TCFG1 is a TCLK instead - * any of the TDIV clocks. - */ -static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) -{ - return tcfg >= S3C64XX_TCFG1_MUX_TCLK; -} - -/** - * tcfg_to_divisor() - convert tcfg1 setting to a divisor - * @tcfg1: The tcfg1 setting, shifted down. - * - * Get the divisor value for the given tcfg1 setting. We assume the - * caller has already checked to see if this is not a TCLK source. - */ -static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) -{ - return 1 << tcfg1; -} - -/** - * pwm_tdiv_has_div1() - does the tdiv setting have a /1 - * - * Return true if we have a /1 in the tdiv setting. - */ -static inline unsigned int pwm_tdiv_has_div1(void) -{ - return 1; -} - -/** - * pwm_tdiv_div_bits() - calculate TCFG1 divisor value. - * @div: The divisor to calculate the bit information for. - * - * Turn a divisor into the necessary bit field for TCFG1. - */ -static inline unsigned long pwm_tdiv_div_bits(unsigned int div) -{ - return ilog2(div); -} - -#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-sys.h b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h index 69b78d9f83b..b91e0209328 100644 --- a/arch/arm/mach-s3c64xx/include/mach/regs-sys.h +++ b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h @@ -21,8 +21,11 @@ #define S3C64XX_AHB_CON1 S3C_SYSREG(0x104) #define S3C64XX_AHB_CON2 S3C_SYSREG(0x108) +#define S3C64XX_SDMA_SEL S3C_SYSREG(0x110) + #define S3C64XX_OTHERS S3C_SYSREG(0x900) #define S3C64XX_OTHERS_USBMASK (1 << 16) +#define S3C64XX_OTHERS_SYNCMUXSEL (1 << 6) #endif /* _PLAT_REGS_SYS_H */ diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c index d164a282bfb..8eba88e7209 100644 --- a/arch/arm/mach-s3c64xx/mach-anw6410.c +++ b/arch/arm/mach-s3c64xx/mach-anw6410.c @@ -45,7 +45,7 @@ #include <plat/fb.h> #include <plat/regs-fb-v4.h> -#include <mach/s3c6410.h> +#include <plat/s3c6410.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c new file mode 100644 index 00000000000..66668565ee7 --- /dev/null +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -0,0 +1,182 @@ +/* Speyside modules for Cragganmore - board data probing + * + * Copyright 2011 Wolfson Microelectronics plc + * Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> + +#include <linux/mfd/wm831x/irq.h> +#include <linux/mfd/wm831x/gpio.h> + +#include <sound/wm8996.h> +#include <sound/wm8962.h> +#include <sound/wm9081.h> + +#include <mach/crag6410.h> + +static struct wm8996_retune_mobile_config wm8996_retune[] = { + { + .name = "Sub LPF", + .rate = 48000, + .regs = { + 0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000, + 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000, + 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000 + }, + }, + { + .name = "Sub HPF", + .rate = 48000, + .regs = { + 0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000, + 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000, + 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000 + }, + }, +}; + +static struct wm8996_pdata wm8996_pdata __initdata = { + .ldo_ena = S3C64XX_GPN(7), + .gpio_base = CODEC_GPIO_BASE, + .micdet_def = 1, + .inl_mode = WM8996_DIFFERRENTIAL_1, + .inr_mode = WM8996_DIFFERRENTIAL_1, + + .irq_flags = IRQF_TRIGGER_RISING, + + .gpio_default = { + 0x8001, /* GPIO1 == ADCLRCLK1 */ + 0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */ + 0x0141, /* GPIO3 == HP_SEL */ + 0x0002, /* GPIO4 == IRQ */ + 0x020e, /* GPIO5 == CLKOUT */ + }, + + .retune_mobile_cfgs = wm8996_retune, + .num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune), +}; + +static struct wm8962_pdata wm8962_pdata __initdata = { + .gpio_init = { + 0, + WM8962_GPIO_FN_OPCLK, + WM8962_GPIO_FN_DMICCLK, + 0, + 0x8000 | WM8962_GPIO_FN_DMICDAT, + WM8962_GPIO_FN_IRQ, /* Open drain mode */ + }, + .irq_active_low = true, +}; + +static struct wm9081_pdata wm9081_pdata __initdata = { + .irq_high = false, + .irq_cmos = false, +}; + +static const struct i2c_board_info wm1254_devs[] = { + { I2C_BOARD_INFO("wm8996", 0x1a), + .platform_data = &wm8996_pdata, + .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, + }, + { I2C_BOARD_INFO("wm9081", 0x6c), + .platform_data = &wm9081_pdata, }, +}; + +static const struct i2c_board_info wm1255_devs[] = { + { I2C_BOARD_INFO("wm5100", 0x1a), + .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, + }, + { I2C_BOARD_INFO("wm9081", 0x6c), + .platform_data = &wm9081_pdata, }, +}; + +static const struct i2c_board_info wm1259_devs[] = { + { I2C_BOARD_INFO("wm8962", 0x1a), + .platform_data = &wm8962_pdata, + .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, + }, +}; + + +static __devinitdata const struct { + u8 id; + const char *name; + const struct i2c_board_info *i2c_devs; + int num_i2c_devs; +} gf_mods[] = { + { .id = 0x01, .name = "1250-EV1 Springbank" }, + { .id = 0x02, .name = "1251-EV1 Jura" }, + { .id = 0x03, .name = "1252-EV1 Glenlivet" }, + { .id = 0x11, .name = "6249-EV2 Glenfarclas", }, + { .id = 0x21, .name = "1275-EV1 Mortlach" }, + { .id = 0x25, .name = "1274-EV1 Glencadam" }, + { .id = 0x31, .name = "1253-EV1 Tomatin", }, + { .id = 0x39, .name = "1254-EV1 Dallas Dhu", + .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) }, + { .id = 0x3a, .name = "1259-EV1 Tobermory", + .i2c_devs = wm1259_devs, .num_i2c_devs = ARRAY_SIZE(wm1259_devs) }, + { .id = 0x3b, .name = "1255-EV1 Kilchoman", + .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) }, + { .id = 0x3c, .name = "1273-EV1 Longmorn" }, +}; + +static __devinit int wlf_gf_module_probe(struct i2c_client *i2c, + const struct i2c_device_id *i2c_id) +{ + int ret, i, j, id, rev; + + ret = i2c_smbus_read_byte_data(i2c, 0); + if (ret < 0) { + dev_err(&i2c->dev, "Failed to read ID: %d\n", ret); + return ret; + } + + id = (ret & 0xfe) >> 2; + rev = ret & 0x3; + for (i = 0; i < ARRAY_SIZE(gf_mods); i++) + if (id == gf_mods[i].id) + break; + + if (i < ARRAY_SIZE(gf_mods)) { + dev_info(&i2c->dev, "%s revision %d\n", + gf_mods[i].name, rev + 1); + for (j = 0; j < gf_mods[i].num_i2c_devs; j++) { + if (!i2c_new_device(i2c->adapter, + &(gf_mods[i].i2c_devs[j]))) + dev_err(&i2c->dev, + "Failed to register dev: %d\n", ret); + } + } else { + dev_warn(&i2c->dev, "Unknown module ID %d revision %d\n", + id, rev); + } + + return 0; +} + +static const struct i2c_device_id wlf_gf_module_id[] = { + { "wlf-gf-module", 0 }, + { } +}; + +static struct i2c_driver wlf_gf_module_driver = { + .driver = { + .name = "wlf-gf-module", + .owner = THIS_MODULE, + }, + .probe = wlf_gf_module_probe, + .id_table = wlf_gf_module_id, +}; + +static int __init wlf_gf_module_register(void) +{ + return i2c_add_driver(&wlf_gf_module_driver); +} +module_init(wlf_gf_module_register); diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 4c76e08423f..d04b6544851 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -43,13 +43,14 @@ #include <mach/hardware.h> #include <mach/map.h> -#include <mach/s3c6410.h> #include <mach/regs-sys.h> #include <mach/regs-gpio.h> #include <mach/regs-modem.h> +#include <mach/crag6410.h> #include <mach/regs-gpio-memport.h> +#include <plat/s3c6410.h> #include <plat/regs-serial.h> #include <plat/regs-fb-v4.h> #include <plat/fb.h> @@ -65,17 +66,6 @@ #include <plat/iic.h> #include <plat/pm.h> -#include <sound/wm8996.h> -#include <sound/wm8962.h> -#include <sound/wm9081.h> - -#define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START -#define GLENFARCLAS_PMIC_IRQ_BASE (IRQ_BOARD_START + 64) - -#define PCA935X_GPIO_BASE GPIO_BOARD_START -#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8) -#define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 16) - /* serial port setup */ #define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK) @@ -287,6 +277,11 @@ static struct platform_device speyside_device = { .id = -1, }; +static struct platform_device lowland_device = { + .name = "lowland", + .id = -1, +}; + static struct platform_device speyside_wm8962_device = { .name = "speyside-wm8962", .id = -1, @@ -295,6 +290,8 @@ static struct platform_device speyside_wm8962_device = { static struct regulator_consumer_supply wallvdd_consumers[] = { REGULATOR_SUPPLY("SPKVDD1", "1-001a"), REGULATOR_SUPPLY("SPKVDD2", "1-001a"), + REGULATOR_SUPPLY("SPKVDDL", "1-001a"), + REGULATOR_SUPPLY("SPKVDDR", "1-001a"), }; static struct regulator_init_data wallvdd_data = { @@ -329,9 +326,6 @@ static struct platform_device *crag6410_devices[] __initdata = { &s3c_device_fb, &s3c_device_ohci, &s3c_device_usb_hsotg, - &s3c_device_adc, - &s3c_device_rtc, - &s3c_device_ts, &s3c_device_timer[0], &s3c64xx_device_iis0, &s3c64xx_device_iis1, @@ -345,6 +339,7 @@ static struct platform_device *crag6410_devices[] __initdata = { &crag6410_backlight_device, &speyside_device, &speyside_wm8962_device, + &lowland_device, &wallvdd_device, }; @@ -353,6 +348,12 @@ static struct pca953x_platform_data crag6410_pca_data = { .irq_base = 0, }; +/* VDDARM is controlled by DVS1 connected to GPK(0) */ +static struct wm831x_buckv_pdata vddarm_pdata = { + .dvs_control_src = 1, + .dvs_gpio = S3C64XX_GPK(0), +}; + static struct regulator_consumer_supply vddarm_consumers[] __initdata = { REGULATOR_SUPPLY("vddarm", NULL), }; @@ -368,6 +369,7 @@ static struct regulator_init_data vddarm __initdata = { .num_consumer_supplies = ARRAY_SIZE(vddarm_consumers), .consumer_supplies = vddarm_consumers, .supply_regulator = "WALLVDD", + .driver_data = &vddarm_pdata, }; static struct regulator_init_data vddint __initdata = { @@ -503,6 +505,8 @@ static struct wm831x_pdata crag_pmic_pdata __initdata = { .backup = &banff_backup_pdata, .gpio_defaults = { + /* GPIO5: DVS1_REQ - CMOS, DBVDD, active high */ + [4] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA | 0x8, /* GPIO11: Touchscreen data - CMOS, DBVDD, active high*/ [10] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x6, /* GPIO12: Touchscreen pen down - CMOS, DBVDD, active high*/ @@ -560,8 +564,12 @@ static struct regulator_init_data pvdd_1v2 __initdata = { }; static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = { + REGULATOR_SUPPLY("LDOVDD", "1-001a"), REGULATOR_SUPPLY("PLLVDD", "1-001a"), REGULATOR_SUPPLY("DBVDD", "1-001a"), + REGULATOR_SUPPLY("DBVDD1", "1-001a"), + REGULATOR_SUPPLY("DBVDD2", "1-001a"), + REGULATOR_SUPPLY("DBVDD3", "1-001a"), REGULATOR_SUPPLY("CPVDD", "1-001a"), REGULATOR_SUPPLY("AVDD2", "1-001a"), REGULATOR_SUPPLY("DCVDD", "1-001a"), @@ -614,81 +622,16 @@ static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = { .disable_touch = true, }; -static struct wm8996_retune_mobile_config wm8996_retune[] = { - { - .name = "Sub LPF", - .rate = 48000, - .regs = { - 0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000, - 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000, - 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000 - }, - }, - { - .name = "Sub HPF", - .rate = 48000, - .regs = { - 0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000, - 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000, - 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000 - }, - }, -}; - -static struct wm8996_pdata wm8996_pdata __initdata = { - .ldo_ena = S3C64XX_GPN(7), - .gpio_base = CODEC_GPIO_BASE, - .micdet_def = 1, - .inl_mode = WM8996_DIFFERRENTIAL_1, - .inr_mode = WM8996_DIFFERRENTIAL_1, - - .irq_flags = IRQF_TRIGGER_RISING, - - .gpio_default = { - 0x8001, /* GPIO1 == ADCLRCLK1 */ - 0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */ - 0x0141, /* GPIO3 == HP_SEL */ - 0x0002, /* GPIO4 == IRQ */ - 0x020e, /* GPIO5 == CLKOUT */ - }, - - .retune_mobile_cfgs = wm8996_retune, - .num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune), -}; - -static struct wm8962_pdata wm8962_pdata __initdata = { - .gpio_init = { - 0, - WM8962_GPIO_FN_OPCLK, - WM8962_GPIO_FN_DMICCLK, - 0, - 0x8000 | WM8962_GPIO_FN_DMICDAT, - WM8962_GPIO_FN_IRQ, /* Open drain mode */ - }, - .irq_active_low = true, -}; - -static struct wm9081_pdata wm9081_pdata __initdata = { - .irq_high = false, - .irq_cmos = false, -}; - static struct i2c_board_info i2c_devs1[] __initdata = { { I2C_BOARD_INFO("wm8311", 0x34), .irq = S3C_EINT(0), .platform_data = &glenfarclas_pmic_pdata }, + { I2C_BOARD_INFO("wlf-gf-module", 0x24) }, + { I2C_BOARD_INFO("wlf-gf-module", 0x25) }, + { I2C_BOARD_INFO("wlf-gf-module", 0x26) }, + { I2C_BOARD_INFO("wm1250-ev1", 0x27) }, - { I2C_BOARD_INFO("wm8996", 0x1a), - .platform_data = &wm8996_pdata, - .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, - }, - { I2C_BOARD_INFO("wm9081", 0x6c), - .platform_data = &wm9081_pdata, }, - { I2C_BOARD_INFO("wm8962", 0x1a), - .platform_data = &wm8962_pdata, - .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, - }, }; static void __init crag6410_map_io(void) diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c index 19a0887e1c1..952f75ff5de 100644 --- a/arch/arm/mach-s3c64xx/mach-hmt.c +++ b/arch/arm/mach-s3c64xx/mach-hmt.c @@ -37,7 +37,7 @@ #include <plat/fb.h> #include <plat/nand.h> -#include <mach/s3c6410.h> +#include <plat/s3c6410.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c index e91f63f7a49..1bc85c35949 100644 --- a/arch/arm/mach-s3c64xx/mach-mini6410.c +++ b/arch/arm/mach-s3c64xx/mach-mini6410.c @@ -32,8 +32,8 @@ #include <mach/regs-gpio.h> #include <mach/regs-modem.h> #include <mach/regs-srom.h> -#include <mach/s3c6410.h> +#include <plat/s3c6410.h> #include <plat/adc.h> #include <plat/cpu.h> #include <plat/devs.h> @@ -205,12 +205,6 @@ static struct platform_device mini6410_lcd_powerdev = { .dev.platform_data = &mini6410_lcd_power_data, }; -static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { - .delay = 10000, - .presc = 49, - .oversampling_shift = 2, -}; - static struct platform_device *mini6410_devices[] __initdata = { &mini6410_device_eth, &s3c_device_hsmmc0, @@ -319,7 +313,7 @@ static void __init mini6410_machine_init(void) s3c_nand_set_platdata(&mini6410_nand_info); s3c_fb_set_platdata(&mini6410_lcd_pdata); - s3c24xx_ts_set_platdata(&s3c_ts_platform); + s3c24xx_ts_set_platdata(NULL); /* configure nCS1 width to 16 bits */ diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c index c30f2e5e0d8..cb13cba98b3 100644 --- a/arch/arm/mach-s3c64xx/mach-ncp.c +++ b/arch/arm/mach-s3c64xx/mach-ncp.c @@ -39,7 +39,7 @@ #include <plat/iic.h> #include <plat/fb.h> -#include <mach/s3c6410.h> +#include <plat/s3c6410.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c index 10870cb5b39..87281e4b847 100644 --- a/arch/arm/mach-s3c64xx/mach-real6410.c +++ b/arch/arm/mach-s3c64xx/mach-real6410.c @@ -33,8 +33,8 @@ #include <mach/regs-gpio.h> #include <mach/regs-modem.h> #include <mach/regs-srom.h> -#include <mach/s3c6410.h> +#include <plat/s3c6410.h> #include <plat/adc.h> #include <plat/cpu.h> #include <plat/devs.h> @@ -198,12 +198,6 @@ static struct platform_device *real6410_devices[] __initdata = { &s3c_device_ohci, }; -static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { - .delay = 10000, - .presc = 49, - .oversampling_shift = 2, -}; - static void __init real6410_map_io(void) { u32 tmp; @@ -300,7 +294,7 @@ static void __init real6410_machine_init(void) s3c_fb_set_platdata(&real6410_lcd_pdata); s3c_nand_set_platdata(&real6410_nand_info); - s3c24xx_ts_set_platdata(&s3c_ts_platform); + s3c24xx_ts_set_platdata(NULL); /* configure nCS1 width to 16 bits */ diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c index cbb57ded3d9..94c831d8836 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq5.c +++ b/arch/arm/mach-s3c64xx/mach-smartq5.c @@ -22,8 +22,8 @@ #include <mach/map.h> #include <mach/regs-gpio.h> -#include <mach/s3c6410.h> +#include <plat/s3c6410.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/fb.h> diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c index 04f914b85fd..f112547ce80 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq7.c +++ b/arch/arm/mach-s3c64xx/mach-smartq7.c @@ -22,8 +22,8 @@ #include <mach/map.h> #include <mach/regs-gpio.h> -#include <mach/s3c6410.h> +#include <plat/s3c6410.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/fb.h> diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c index 6fd5e95f8f7..73450c2b530 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6400.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c @@ -31,7 +31,7 @@ #include <plat/regs-serial.h> -#include <mach/s3c6400.h> +#include <plat/s3c6400.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index dcf2d73b478..8bc8edd85e5 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -63,7 +63,7 @@ #include <plat/fb.h> #include <plat/gpio-cfg.h> -#include <mach/s3c6410.h> +#include <plat/s3c6410.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> @@ -262,45 +262,6 @@ static struct samsung_keypad_platdata smdk6410_keypad_data __initdata = { .cols = 8, }; -static int smdk6410_backlight_init(struct device *dev) -{ - int ret; - - ret = gpio_request(S3C64XX_GPF(15), "Backlight"); - if (ret) { - printk(KERN_ERR "failed to request GPF for PWM-OUT1\n"); - return ret; - } - - /* Configure GPIO pin with S3C64XX_GPF15_PWM_TOUT1 */ - s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2)); - - return 0; -} - -static void smdk6410_backlight_exit(struct device *dev) -{ - s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_OUTPUT); - gpio_free(S3C64XX_GPF(15)); -} - -static struct platform_pwm_backlight_data smdk6410_backlight_data = { - .pwm_id = 1, - .max_brightness = 255, - .dft_brightness = 255, - .pwm_period_ns = 78770, - .init = smdk6410_backlight_init, - .exit = smdk6410_backlight_exit, -}; - -static struct platform_device smdk6410_backlight_device = { - .name = "pwm-backlight", - .dev = { - .parent = &s3c_device_timer[1].dev, - .platform_data = &smdk6410_backlight_data, - }, -}; - static struct map_desc smdk6410_iodesc[] = {}; static struct platform_device *smdk6410_devices[] __initdata = { @@ -658,12 +619,6 @@ static struct i2c_board_info i2c_devs1[] __initdata = { { I2C_BOARD_INFO("24c128", 0x57), }, /* Samsung S524AD0XD1 */ }; -static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { - .delay = 10000, - .presc = 49, - .oversampling_shift = 2, -}; - /* LCD Backlight data */ static struct samsung_bl_gpio_info smdk6410_bl_gpio_info = { .no = S3C64XX_GPF(15), @@ -705,7 +660,7 @@ static void __init smdk6410_machine_init(void) samsung_keypad_set_platdata(&smdk6410_keypad_data); - s3c24xx_ts_set_platdata(&s3c_ts_platform); + s3c24xx_ts_set_platdata(NULL); /* configure nCS1 width to 16 bits */ diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index 8bad6437068..b375cd5c47c 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -16,6 +16,7 @@ #include <linux/suspend.h> #include <linux/serial_core.h> #include <linux/io.h> +#include <linux/gpio.h> #include <mach/map.h> #include <mach/irqs.h> @@ -28,6 +29,7 @@ #include <mach/regs-clock.h> #include <mach/regs-syscon-power.h> #include <mach/regs-gpio-memport.h> +#include <mach/regs-modem.h> #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK void s3c_pm_debug_smdkled(u32 set, u32 clear) @@ -84,6 +86,9 @@ static struct sleep_save misc_save[] = { SAVE_ITEM(S3C64XX_MEM0CONSLP0), SAVE_ITEM(S3C64XX_MEM0CONSLP1), SAVE_ITEM(S3C64XX_MEM1CONSLP), + + SAVE_ITEM(S3C64XX_SDMA_SEL), + SAVE_ITEM(S3C64XX_MODEM_MIFPCON), }; void s3c_pm_configure_extint(void) diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c index 5e93fe3f3f4..7a3bc32df42 100644 --- a/arch/arm/mach-s3c64xx/s3c6400.c +++ b/arch/arm/mach-s3c64xx/s3c6400.c @@ -38,7 +38,7 @@ #include <plat/sdhci.h> #include <plat/iic-core.h> #include <plat/onenand-core.h> -#include <mach/s3c6400.h> +#include <plat/s3c6400.h> void __init s3c6400_map_io(void) { diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c index 312aa6b115e..4117003464a 100644 --- a/arch/arm/mach-s3c64xx/s3c6410.c +++ b/arch/arm/mach-s3c64xx/s3c6410.c @@ -41,8 +41,8 @@ #include <plat/adc-core.h> #include <plat/iic-core.h> #include <plat/onenand-core.h> -#include <mach/s3c6400.h> -#include <mach/s3c6410.h> +#include <plat/s3c6400.h> +#include <plat/s3c6410.h> void __init s3c6410_map_io(void) { diff --git a/arch/arm/mach-s3c64xx/setup-sdhci.c b/arch/arm/mach-s3c64xx/setup-sdhci.c index f344a222bc8..c75a71b2116 100644 --- a/arch/arm/mach-s3c64xx/setup-sdhci.c +++ b/arch/arm/mach-s3c64xx/setup-sdhci.c @@ -12,17 +12,7 @@ * published by the Free Software Foundation. */ -#include <linux/kernel.h> #include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <linux/mmc/card.h> -#include <linux/mmc/host.h> - -#include <plat/regs-sdhci.h> -#include <plat/sdhci.h> /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ @@ -32,41 +22,3 @@ char *s3c64xx_hsmmc_clksrcs[4] = { [2] = "mmc_bus", /* [3] = "48m", - note not successfully used yet */ }; - -void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card) -{ - u32 ctrl2, ctrl3; - - ctrl2 = readl(r + S3C_SDHCI_CONTROL2); - ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK; - ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR | - S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK | - S3C_SDHCI_CTRL2_ENFBCLKRX | - S3C_SDHCI_CTRL2_DFCNT_NONE | - S3C_SDHCI_CTRL2_ENCLKOUTHOLD); - - if (ios->clock < 25 * 1000000) - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 | - S3C_SDHCI_CTRL3_FCSEL2 | - S3C_SDHCI_CTRL3_FCSEL1 | - S3C_SDHCI_CTRL3_FCSEL0); - else - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0); - - pr_debug("%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3); - writel(ctrl2, r + S3C_SDHCI_CONTROL2); - writel(ctrl3, r + S3C_SDHCI_CONTROL3); -} - -void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card) -{ - writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4); - - s3c6400_setup_sdhci_cfg_card(dev, r, ios, card); -} diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig index 65c7518dad7..18690c5f99e 100644 --- a/arch/arm/mach-s5p64x0/Kconfig +++ b/arch/arm/mach-s5p64x0/Kconfig @@ -9,18 +9,28 @@ if ARCH_S5P64X0 config CPU_S5P6440 bool - select S3C_PL330_DMA + select SAMSUNG_DMADEV select S5P_HRT + select S5P_SLEEP if PM + select SAMSUNG_WAKEMASK if PM help Enable S5P6440 CPU support config CPU_S5P6450 bool - select S3C_PL330_DMA + select SAMSUNG_DMADEV select S5P_HRT + select S5P_SLEEP if PM + select SAMSUNG_WAKEMASK if PM help Enable S5P6450 CPU support +config S5P64X0_SETUP_FB_24BPP + bool + help + Common setup code for S5P64X0 based boards with a LCD display + through RGB interface. + config S5P64X0_SETUP_I2C1 bool help @@ -31,6 +41,7 @@ config S5P64X0_SETUP_I2C1 config MACH_SMDK6440 bool "SMDK6440" select CPU_S5P6440 + select S3C_DEV_FB select S3C_DEV_I2C1 select S3C_DEV_RTC select S3C_DEV_WDT @@ -39,6 +50,7 @@ config MACH_SMDK6440 select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_PWM select SAMSUNG_DEV_TS + select S5P64X0_SETUP_FB_24BPP select S5P64X0_SETUP_I2C1 help Machine support for the Samsung SMDK6440 @@ -46,6 +58,7 @@ config MACH_SMDK6440 config MACH_SMDK6450 bool "SMDK6450" select CPU_S5P6450 + select S3C_DEV_FB select S3C_DEV_I2C1 select S3C_DEV_RTC select S3C_DEV_WDT @@ -54,6 +67,7 @@ config MACH_SMDK6450 select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_PWM select SAMSUNG_DEV_TS + select S5P64X0_SETUP_FB_24BPP select S5P64X0_SETUP_I2C1 help Machine support for the Samsung SMDK6450 diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile index 5f6afdf067e..a1324d8dc4e 100644 --- a/arch/arm/mach-s5p64x0/Makefile +++ b/arch/arm/mach-s5p64x0/Makefile @@ -12,10 +12,11 @@ obj- := # Core support for S5P64X0 system -obj-$(CONFIG_ARCH_S5P64X0) += cpu.o init.o clock.o dma.o gpiolib.o +obj-$(CONFIG_ARCH_S5P64X0) += cpu.o init.o clock.o dma.o obj-$(CONFIG_ARCH_S5P64X0) += setup-i2c0.o irq-eint.o obj-$(CONFIG_CPU_S5P6440) += clock-s5p6440.o obj-$(CONFIG_CPU_S5P6450) += clock-s5p6450.o +obj-$(CONFIG_PM) += pm.o irq-pm.o # machine support @@ -28,3 +29,4 @@ obj-y += dev-audio.o obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o obj-$(CONFIG_S5P64X0_SETUP_I2C1) += setup-i2c1.o +obj-$(CONFIG_S5P64X0_SETUP_FB_24BPP) += setup-fb-24bpp.o diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c index 0e9cd3092dd..c54c65d511f 100644 --- a/arch/arm/mach-s5p64x0/clock-s5p6440.c +++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c @@ -146,7 +146,8 @@ static struct clk init_clocks_off[] = { .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 8), }, { - .name = "pdma", + .name = "dma", + .devname = "dma-pl330", .parent = &clk_hclk_low.clk, .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 12), @@ -499,6 +500,11 @@ static struct clksrc_clk *sysclks[] = { &clk_pclk_low, }; +static struct clk dummy_apb_pclk = { + .name = "apb_pclk", + .id = -1, +}; + void __init_or_cpufreq s5p6440_setup_clocks(void) { struct clk *xtal_clk; @@ -581,5 +587,7 @@ void __init s5p6440_register_clocks(void) s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c24xx_register_clock(&dummy_apb_pclk); + s3c_pwmclk_init(); } diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c index d9dc16cde10..2d04abfba12 100644 --- a/arch/arm/mach-s5p64x0/clock-s5p6450.c +++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c @@ -179,7 +179,8 @@ static struct clk init_clocks_off[] = { .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 3), }, { - .name = "pdma", + .name = "dma", + .devname = "dma-pl330", .parent = &clk_hclk_low.clk, .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 12), @@ -553,6 +554,11 @@ static struct clksrc_clk *sysclks[] = { &clk_sclk_audio0, }; +static struct clk dummy_apb_pclk = { + .name = "apb_pclk", + .id = -1, +}; + void __init_or_cpufreq s5p6450_setup_clocks(void) { struct clk *xtal_clk; @@ -632,5 +638,7 @@ void __init s5p6450_register_clocks(void) s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c24xx_register_clock(&dummy_apb_pclk); + s3c_pwmclk_init(); } diff --git a/arch/arm/mach-s5p64x0/cpu.c b/arch/arm/mach-s5p64x0/cpu.c index 8a938542c54..ecab40cf19a 100644 --- a/arch/arm/mach-s5p64x0/cpu.c +++ b/arch/arm/mach-s5p64x0/cpu.c @@ -39,6 +39,7 @@ #include <plat/s5p6440.h> #include <plat/s5p6450.h> #include <plat/adc-core.h> +#include <plat/fb-core.h> /* Initial IO mappings */ @@ -109,6 +110,7 @@ void __init s5p6440_map_io(void) { /* initialize any device information early */ s3c_adc_setname("s3c64xx-adc"); + s3c_fb_setname("s5p64x0-fb"); iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc)); iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc)); @@ -119,6 +121,7 @@ void __init s5p6450_map_io(void) { /* initialize any device information early */ s3c_adc_setname("s3c64xx-adc"); + s3c_fb_setname("s5p64x0-fb"); iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc)); iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc)); diff --git a/arch/arm/mach-s5p64x0/dev-spi.c b/arch/arm/mach-s5p64x0/dev-spi.c index ac825e82632..1fd9c79c7db 100644 --- a/arch/arm/mach-s5p64x0/dev-spi.c +++ b/arch/arm/mach-s5p64x0/dev-spi.c @@ -21,6 +21,7 @@ #include <mach/regs-clock.h> #include <mach/spi-clocks.h> +#include <plat/cpu.h> #include <plat/s3c64xx-spi.h> #include <plat/gpio-cfg.h> @@ -185,11 +186,8 @@ struct platform_device s5p64x0_device_spi1 = { void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) { - unsigned int id; struct s3c64xx_spi_info *pd; - id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000; - /* Reject invalid configuration */ if (!num_cs || src_clk_nr < 0 || src_clk_nr > S5P64X0_SPI_SRCCLK_SCLK) { @@ -199,7 +197,7 @@ void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) switch (cntrlr) { case 0: - if (id == 0x50000) + if (soc_is_s5p6450()) pd = &s5p6450_spi0_pdata; else pd = &s5p6440_spi0_pdata; @@ -207,7 +205,7 @@ void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) s5p64x0_device_spi0.dev.platform_data = pd; break; case 1: - if (id == 0x50000) + if (soc_is_s5p6450()) pd = &s5p6450_spi1_pdata; else pd = &s5p6440_spi1_pdata; diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c index d7ad944b347..442dd4ad12d 100644 --- a/arch/arm/mach-s5p64x0/dma.c +++ b/arch/arm/mach-s5p64x0/dma.c @@ -21,128 +21,218 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/amba/bus.h> +#include <linux/amba/pl330.h> + +#include <asm/irq.h> #include <mach/map.h> #include <mach/irqs.h> #include <mach/regs-clock.h> +#include <mach/dma.h> +#include <plat/cpu.h> #include <plat/devs.h> -#include <plat/s3c-pl330-pdata.h> +#include <plat/irqs.h> static u64 dma_dmamask = DMA_BIT_MASK(32); -static struct resource s5p64x0_pdma_resource[] = { - [0] = { - .start = S5P64X0_PA_PDMA, - .end = S5P64X0_PA_PDMA + SZ_4K, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_DMA0, - .end = IRQ_DMA0, - .flags = IORESOURCE_IRQ, +struct dma_pl330_peri s5p6440_pdma_peri[22] = { + { + .peri_id = (u8)DMACH_UART0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART3_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART3_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = DMACH_MAX, + }, { + .peri_id = DMACH_MAX, + }, { + .peri_id = (u8)DMACH_PCM0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_SPI1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI1_RX, + .rqtype = DEVTOMEM, }, }; -static struct s3c_pl330_platdata s5p6440_pdma_pdata = { - .peri = { - [0] = DMACH_UART0_RX, - [1] = DMACH_UART0_TX, - [2] = DMACH_UART1_RX, - [3] = DMACH_UART1_TX, - [4] = DMACH_UART2_RX, - [5] = DMACH_UART2_TX, - [6] = DMACH_UART3_RX, - [7] = DMACH_UART3_TX, - [8] = DMACH_MAX, - [9] = DMACH_MAX, - [10] = DMACH_PCM0_TX, - [11] = DMACH_PCM0_RX, - [12] = DMACH_I2S0_TX, - [13] = DMACH_I2S0_RX, - [14] = DMACH_SPI0_TX, - [15] = DMACH_SPI0_RX, - [16] = DMACH_MAX, - [17] = DMACH_MAX, - [18] = DMACH_MAX, - [19] = DMACH_MAX, - [20] = DMACH_SPI1_TX, - [21] = DMACH_SPI1_RX, - [22] = DMACH_MAX, - [23] = DMACH_MAX, - [24] = DMACH_MAX, - [25] = DMACH_MAX, - [26] = DMACH_MAX, - [27] = DMACH_MAX, - [28] = DMACH_MAX, - [29] = DMACH_PWM, - [30] = DMACH_MAX, - [31] = DMACH_MAX, - }, +struct dma_pl330_platdata s5p6440_pdma_pdata = { + .nr_valid_peri = ARRAY_SIZE(s5p6440_pdma_peri), + .peri = s5p6440_pdma_peri, }; -static struct s3c_pl330_platdata s5p6450_pdma_pdata = { - .peri = { - [0] = DMACH_UART0_RX, - [1] = DMACH_UART0_TX, - [2] = DMACH_UART1_RX, - [3] = DMACH_UART1_TX, - [4] = DMACH_UART2_RX, - [5] = DMACH_UART2_TX, - [6] = DMACH_UART3_RX, - [7] = DMACH_UART3_TX, - [8] = DMACH_UART4_RX, - [9] = DMACH_UART4_TX, - [10] = DMACH_PCM0_TX, - [11] = DMACH_PCM0_RX, - [12] = DMACH_I2S0_TX, - [13] = DMACH_I2S0_RX, - [14] = DMACH_SPI0_TX, - [15] = DMACH_SPI0_RX, - [16] = DMACH_PCM1_TX, - [17] = DMACH_PCM1_RX, - [18] = DMACH_PCM2_TX, - [19] = DMACH_PCM2_RX, - [20] = DMACH_SPI1_TX, - [21] = DMACH_SPI1_RX, - [22] = DMACH_USI_TX, - [23] = DMACH_USI_RX, - [24] = DMACH_MAX, - [25] = DMACH_I2S1_TX, - [26] = DMACH_I2S1_RX, - [27] = DMACH_I2S2_TX, - [28] = DMACH_I2S2_RX, - [29] = DMACH_PWM, - [30] = DMACH_UART5_RX, - [31] = DMACH_UART5_TX, +struct dma_pl330_peri s5p6450_pdma_peri[32] = { + { + .peri_id = (u8)DMACH_UART0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART3_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART3_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART4_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART4_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_USI_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_USI_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_I2S1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PWM, + }, { + .peri_id = (u8)DMACH_UART5_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART5_TX, + .rqtype = MEMTODEV, }, }; -static struct platform_device s5p64x0_device_pdma = { - .name = "s3c-pl330", - .id = -1, - .num_resources = ARRAY_SIZE(s5p64x0_pdma_resource), - .resource = s5p64x0_pdma_resource, - .dev = { +struct dma_pl330_platdata s5p6450_pdma_pdata = { + .nr_valid_peri = ARRAY_SIZE(s5p6450_pdma_peri), + .peri = s5p6450_pdma_peri, +}; + +struct amba_device s5p64x0_device_pdma = { + .dev = { + .init_name = "dma-pl330", .dma_mask = &dma_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), }, + .res = { + .start = S5P64X0_PA_PDMA, + .end = S5P64X0_PA_PDMA + SZ_4K, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_DMA0, NO_IRQ}, + .periphid = 0x00041330, }; static int __init s5p64x0_dma_init(void) { - unsigned int id; - - id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000; - - if (id == 0x50000) + if (soc_is_s5p6450()) s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata; else s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata; - platform_device_register(&s5p64x0_device_pdma); + amba_device_register(&s5p64x0_device_pdma, &iomem_resource); return 0; } diff --git a/arch/arm/mach-s5p64x0/gpiolib.c b/arch/arm/mach-s5p64x0/gpiolib.c index e7fb3b004e7..700dac6c43f 100644 --- a/arch/arm/mach-s5p64x0/gpiolib.c +++ b/arch/arm/mach-s5p64x0/gpiolib.c @@ -19,6 +19,7 @@ #include <mach/regs-gpio.h> #include <mach/regs-clock.h> +#include <plat/cpu.h> #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> #include <plat/gpio-cfg-helpers.h> @@ -473,14 +474,10 @@ static void __init s5p64x0_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip, static int __init s5p64x0_gpiolib_init(void) { - unsigned int chipid; - - chipid = __raw_readl(S5P64X0_SYS_ID); - s5p64x0_gpiolib_set_cfg(s5p64x0_gpio_cfgs, ARRAY_SIZE(s5p64x0_gpio_cfgs)); - if ((chipid & 0xff000) == 0x50000) { + if (soc_is_s5p6450()) { samsung_gpiolib_add_2bit_chips(s5p6450_gpio_2bit, ARRAY_SIZE(s5p6450_gpio_2bit)); diff --git a/arch/arm/mach-s5p64x0/include/mach/clkdev.h b/arch/arm/mach-s5p64x0/include/mach/clkdev.h deleted file mode 100644 index 7dffa83d23f..00000000000 --- a/arch/arm/mach-s5p64x0/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __MACH_CLKDEV_H__ -#define __MACH_CLKDEV_H__ - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do {} while (0) - -#endif diff --git a/arch/arm/mach-s5p64x0/include/mach/dma.h b/arch/arm/mach-s5p64x0/include/mach/dma.h index 81209eb1409..5a622af461d 100644 --- a/arch/arm/mach-s5p64x0/include/mach/dma.h +++ b/arch/arm/mach-s5p64x0/include/mach/dma.h @@ -20,7 +20,7 @@ #ifndef __MACH_DMA_H #define __MACH_DMA_H -/* This platform uses the common S3C DMA API driver for PL330 */ -#include <plat/s3c-dma-pl330.h> +/* This platform uses the common common DMA API driver for PL330 */ +#include <plat/dma-pl330.h> #endif /* __MACH_DMA_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/irqs.h b/arch/arm/mach-s5p64x0/include/mach/irqs.h index 5837a36ece8..53982db9d25 100644 --- a/arch/arm/mach-s5p64x0/include/mach/irqs.h +++ b/arch/arm/mach-s5p64x0/include/mach/irqs.h @@ -87,6 +87,10 @@ #define IRQ_I2S0 IRQ_I2SV40 +#define IRQ_LCD_FIFO IRQ_DISPCON0 +#define IRQ_LCD_VSYNC IRQ_DISPCON1 +#define IRQ_LCD_SYSTEM IRQ_DISPCON2 + /* S5P6450 EINT feature will be added */ /* diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h index 95c91257c7c..4d3ac8a3709 100644 --- a/arch/arm/mach-s5p64x0/include/mach/map.h +++ b/arch/arm/mach-s5p64x0/include/mach/map.h @@ -47,6 +47,8 @@ #define S5P64X0_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000)) +#define S5P64X0_PA_FB 0xEE000000 + #define S5P64X0_PA_I2S 0xF2000000 #define S5P6450_PA_I2S1 0xF2800000 #define S5P6450_PA_I2S2 0xF2900000 @@ -64,6 +66,7 @@ #define S3C_PA_IIC1 S5P6440_PA_IIC1 #define S3C_PA_RTC S5P64X0_PA_RTC #define S3C_PA_WDT S5P64X0_PA_WDT +#define S3C_PA_FB S5P64X0_PA_FB #define S5P_PA_CHIPID S5P64X0_PA_CHIPID #define S5P_PA_SROMC S5P64X0_PA_SROMC @@ -85,5 +88,6 @@ #define S5P_PA_UART5 S5P6450_PA_UART(5) #define S5P_SZ_UART SZ_256 +#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET)) #endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/pm-core.h b/arch/arm/mach-s5p64x0/include/mach/pm-core.h new file mode 100644 index 00000000000..e52f7545d3a --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/pm-core.h @@ -0,0 +1,117 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/pm-core.h + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P64X0 - PM core support for arch/arm/plat-samsung/pm.c + * + * Based on PM core support for S3C64XX by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <mach/regs-gpio.h> + +static inline void s3c_pm_debug_init_uart(void) +{ + u32 tmp = __raw_readl(S5P64X0_CLK_GATE_PCLK); + + /* + * As a note, since the S5P64X0 UARTs generally have multiple + * clock sources, we simply enable PCLK at the moment and hope + * that the resume settings for the UART are suitable for the + * use with PCLK. + */ + tmp |= S5P64X0_CLK_GATE_PCLK_UART0; + tmp |= S5P64X0_CLK_GATE_PCLK_UART1; + tmp |= S5P64X0_CLK_GATE_PCLK_UART2; + tmp |= S5P64X0_CLK_GATE_PCLK_UART3; + + __raw_writel(tmp, S5P64X0_CLK_GATE_PCLK); + udelay(10); +} + +static inline void s3c_pm_arch_prepare_irqs(void) +{ + /* VIC should have already been taken care of */ + + /* clear any pending EINT0 interrupts */ + __raw_writel(__raw_readl(S5P64X0_EINT0PEND), S5P64X0_EINT0PEND); +} + +static inline void s3c_pm_arch_stop_clocks(void) { } +static inline void s3c_pm_arch_show_resume_irqs(void) { } + +/* + * make these defines, we currently do not have any need to change + * the IRQ wake controls depending on the CPU we are running on + */ +#define s3c_irqwake_eintallow ((1 << 16) - 1) +#define s3c_irqwake_intallow (~0) + +static inline void s3c_pm_arch_update_uart(void __iomem *regs, + struct pm_uart_save *save) +{ + u32 ucon = __raw_readl(regs + S3C2410_UCON); + u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK; + u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK; + u32 new_ucon; + u32 delta; + + /* + * S5P64X0 UART blocks only support level interrupts, so ensure that + * when we restore unused UART blocks we force the level interrupt + * settings. + */ + save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL; + + /* + * We have a constraint on changing the clock type of the UART + * between UCLKx and PCLK, so ensure that when we restore UCON + * that the CLK field is correctly modified if the bootloader + * has changed anything. + */ + if (ucon_clk != save_clk) { + new_ucon = save->ucon; + delta = ucon_clk ^ save_clk; + + /* + * change from UCLKx => wrong PCLK, + * either UCLK can be tested for by a bit-test + * with UCLK0 + */ + if (ucon_clk & S3C6400_UCON_UCLK0 && + !(save_clk & S3C6400_UCON_UCLK0) && + delta & S3C6400_UCON_PCLK2) { + new_ucon &= ~S3C6400_UCON_UCLK0; + } else if (delta == S3C6400_UCON_PCLK2) { + /* + * as a precaution, don't change from + * PCLK2 => PCLK or vice-versa + */ + new_ucon ^= S3C6400_UCON_PCLK2; + } + + S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n", + ucon, new_ucon, save->ucon); + save->ucon = new_ucon; + } +} + +static inline void s3c_pm_restored_gpios(void) +{ + /* ensure sleep mode has been cleared from the system */ + __raw_writel(0, S5P64X0_SLPEN); +} + +static inline void samsung_pm_saved_gpios(void) +{ + /* + * turn on the sleep mode and keep it there, as it seems that during + * suspend the xCON registers get re-set and thus you can end up with + * problems between going to sleep and resuming. + */ + __raw_writel(S5P64X0_SLPEN_USE_xSLP, S5P64X0_SLPEN); +} diff --git a/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h b/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h deleted file mode 100644 index 19fff8b701c..00000000000 --- a/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h +++ /dev/null @@ -1,68 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S5P64X0 - pwm clock and timer support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_PWMCLK_H -#define __ASM_ARCH_PWMCLK_H __FILE__ - -/** - * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk - * @tcfg: The timer TCFG1 register bits shifted down to 0. - * - * Return true if the given configuration from TCFG1 is a TCLK instead - * any of the TDIV clocks. - */ -static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) -{ - return 0; -} - -/** - * tcfg_to_divisor() - convert tcfg1 setting to a divisor - * @tcfg1: The tcfg1 setting, shifted down. - * - * Get the divisor value for the given tcfg1 setting. We assume the - * caller has already checked to see if this is not a TCLK source. - */ -static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) -{ - return 1 << tcfg1; -} - -/** - * pwm_tdiv_has_div1() - does the tdiv setting have a /1 - * - * Return true if we have a /1 in the tdiv setting. - */ -static inline unsigned int pwm_tdiv_has_div1(void) -{ - return 1; -} - -/** - * pwm_tdiv_div_bits() - calculate TCFG1 divisor value. - * @div: The divisor to calculate the bit information for. - * - * Turn a divisor into the necessary bit field for TCFG1. - */ -static inline unsigned long pwm_tdiv_div_bits(unsigned int div) -{ - return ilog2(div); -} - -#define S3C_TCFG1_MUX_TCLK 0 - -#endif /* __ASM_ARCH_PWMCLK_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-clock.h b/arch/arm/mach-s5p64x0/include/mach/regs-clock.h index a133f22fa15..bd91112c813 100644 --- a/arch/arm/mach-s5p64x0/include/mach/regs-clock.h +++ b/arch/arm/mach-s5p64x0/include/mach/regs-clock.h @@ -41,17 +41,50 @@ #define S5P6450_DPLL_CON S5P_CLKREG(0x50) #define S5P6450_DPLL_CON_K S5P_CLKREG(0x54) +#define S5P64X0_AHB_CON0 S5P_CLKREG(0x100) #define S5P64X0_CLK_SRC1 S5P_CLKREG(0x10C) #define S5P64X0_SYS_ID S5P_CLKREG(0x118) #define S5P64X0_SYS_OTHERS S5P_CLKREG(0x11C) #define S5P64X0_PWR_CFG S5P_CLKREG(0x804) +#define S5P64X0_EINT_WAKEUP_MASK S5P_CLKREG(0x808) +#define S5P64X0_SLEEP_CFG S5P_CLKREG(0x818) +#define S5P64X0_PWR_STABLE S5P_CLKREG(0x828) + #define S5P64X0_OTHERS S5P_CLKREG(0x900) +#define S5P64X0_WAKEUP_STAT S5P_CLKREG(0x908) + +#define S5P64X0_INFORM0 S5P_CLKREG(0xA00) #define S5P64X0_CLKDIV0_HCLK_SHIFT (8) #define S5P64X0_CLKDIV0_HCLK_MASK (0xF << S5P64X0_CLKDIV0_HCLK_SHIFT) +/* HCLK GATE Registers */ +#define S5P64X0_CLK_GATE_HCLK1_FIMGVG (1 << 2) +#define S5P64X0_CLK_GATE_SCLK1_FIMGVG (1 << 2) + +/* PCLK GATE Registers */ +#define S5P64X0_CLK_GATE_PCLK_UART3 (1 << 4) +#define S5P64X0_CLK_GATE_PCLK_UART2 (1 << 3) +#define S5P64X0_CLK_GATE_PCLK_UART1 (1 << 2) +#define S5P64X0_CLK_GATE_PCLK_UART0 (1 << 1) + +#define S5P64X0_PWR_CFG_MMC1_DISABLE (1 << 15) +#define S5P64X0_PWR_CFG_MMC0_DISABLE (1 << 14) +#define S5P64X0_PWR_CFG_RTC_TICK_DISABLE (1 << 11) +#define S5P64X0_PWR_CFG_RTC_ALRM_DISABLE (1 << 10) +#define S5P64X0_PWR_CFG_WFI_MASK (3 << 5) +#define S5P64X0_PWR_CFG_WFI_SLEEP (3 << 5) + +#define S5P64X0_SLEEP_CFG_OSC_EN (1 << 0) + +#define S5P64X0_PWR_STABLE_PWR_CNT_VAL4 (4 << 0) + +#define S5P6450_OTHERS_DISABLE_INT (1 << 31) +#define S5P64X0_OTHERS_RET_UART (1 << 26) +#define S5P64X0_OTHERS_RET_MMC1 (1 << 25) +#define S5P64X0_OTHERS_RET_MMC0 (1 << 24) #define S5P64X0_OTHERS_USB_SIG_MASK (1 << 16) /* Compatibility defines */ diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h index 6ce254729f3..cfdfa4fdadf 100644 --- a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h +++ b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h @@ -34,14 +34,35 @@ #define S5P6450_GPQ_BASE (S5P_VA_GPIO + 0x0180) #define S5P6450_GPS_BASE (S5P_VA_GPIO + 0x0300) +#define S5P64X0_SPCON0 (S5P_VA_GPIO + 0x1A0) +#define S5P64X0_SPCON0_LCD_SEL_MASK (0x3 << 0) +#define S5P64X0_SPCON0_LCD_SEL_RGB (0x1 << 0) +#define S5P64X0_SPCON1 (S5P_VA_GPIO + 0x2B0) + +#define S5P64X0_MEM0CONSLP0 (S5P_VA_GPIO + 0x1C0) +#define S5P64X0_MEM0CONSLP1 (S5P_VA_GPIO + 0x1C4) +#define S5P64X0_MEM0DRVCON (S5P_VA_GPIO + 0x1D0) +#define S5P64X0_MEM1DRVCON (S5P_VA_GPIO + 0x1D4) + +#define S5P64X0_EINT12CON (S5P_VA_GPIO + 0x200) +#define S5P64X0_EINT12FLTCON (S5P_VA_GPIO + 0x220) +#define S5P64X0_EINT12MASK (S5P_VA_GPIO + 0x240) + /* External interrupt control registers for group0 */ #define EINT0CON0_OFFSET (0x900) +#define EINT0FLTCON0_OFFSET (0x910) +#define EINT0FLTCON1_OFFSET (0x914) #define EINT0MASK_OFFSET (0x920) #define EINT0PEND_OFFSET (0x924) #define S5P64X0_EINT0CON0 (S5P_VA_GPIO + EINT0CON0_OFFSET) +#define S5P64X0_EINT0FLTCON0 (S5P_VA_GPIO + EINT0FLTCON0_OFFSET) +#define S5P64X0_EINT0FLTCON1 (S5P_VA_GPIO + EINT0FLTCON1_OFFSET) #define S5P64X0_EINT0MASK (S5P_VA_GPIO + EINT0MASK_OFFSET) #define S5P64X0_EINT0PEND (S5P_VA_GPIO + EINT0PEND_OFFSET) +#define S5P64X0_SLPEN (S5P_VA_GPIO + 0x930) +#define S5P64X0_SLPEN_USE_xSLP (1 << 0) + #endif /* __ASM_ARCH_REGS_GPIO_H */ diff --git a/arch/arm/mach-s5p64x0/irq-eint.c b/arch/arm/mach-s5p64x0/irq-eint.c index 69ed4545112..275dc74f4a7 100644 --- a/arch/arm/mach-s5p64x0/irq-eint.c +++ b/arch/arm/mach-s5p64x0/irq-eint.c @@ -17,8 +17,10 @@ #include <linux/irq.h> #include <linux/io.h> +#include <plat/cpu.h> #include <plat/regs-irqtype.h> #include <plat/gpio-cfg.h> +#include <plat/pm.h> #include <mach/regs-gpio.h> #include <mach/regs-clock.h> @@ -67,7 +69,7 @@ static int s5p64x0_irq_eint_set_type(struct irq_data *data, unsigned int type) __raw_writel(ctrl, S5P64X0_EINT0CON0); /* Configure the GPIO pin for 6450 or 6440 based on CPU ID */ - if (0x50000 == (__raw_readl(S5P64X0_SYS_ID) & 0xFF000)) + if (soc_is_s5p6450()) s3c_gpio_cfgpin(S5P6450_GPN(offs), S3C_GPIO_SFN(2)); else s3c_gpio_cfgpin(S5P6440_GPN(offs), S3C_GPIO_SFN(2)); @@ -129,10 +131,11 @@ static int s5p64x0_alloc_gc(void) } ct = gc->chip_types; - ct->chip.irq_ack = irq_gc_ack; + ct->chip.irq_ack = irq_gc_ack_set_bit; ct->chip.irq_mask = irq_gc_mask_set_bit; ct->chip.irq_unmask = irq_gc_mask_clr_bit; ct->chip.irq_set_type = s5p64x0_irq_eint_set_type; + ct->chip.irq_set_wake = s3c_irqext_wake; ct->regs.ack = EINT0PEND_OFFSET; ct->regs.mask = EINT0MASK_OFFSET; irq_setup_generic_chip(gc, IRQ_MSK(16), IRQ_GC_INIT_MASK_CACHE, diff --git a/arch/arm/mach-s5p64x0/irq-pm.c b/arch/arm/mach-s5p64x0/irq-pm.c new file mode 100644 index 00000000000..3e6f2456ee9 --- /dev/null +++ b/arch/arm/mach-s5p64x0/irq-pm.c @@ -0,0 +1,92 @@ +/* linux/arch/arm/mach-s5p64x0/irq-pm.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P64X0 - Interrupt handling Power Management + * + * Based on arch/arm/mach-s3c64xx/irq-pm.c by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/syscore_ops.h> +#include <linux/serial_core.h> +#include <linux/io.h> + +#include <plat/regs-serial.h> +#include <plat/pm.h> + +#include <mach/regs-gpio.h> + +static struct sleep_save irq_save[] = { + SAVE_ITEM(S5P64X0_EINT0CON0), + SAVE_ITEM(S5P64X0_EINT0FLTCON0), + SAVE_ITEM(S5P64X0_EINT0FLTCON1), + SAVE_ITEM(S5P64X0_EINT0MASK), +}; + +static struct irq_grp_save { + u32 con; + u32 fltcon; + u32 mask; +} eint_grp_save[4]; + +static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS]; + +static int s5p64x0_irq_pm_suspend(void) +{ + struct irq_grp_save *grp = eint_grp_save; + int i; + + S3C_PMDBG("%s: suspending IRQs\n", __func__); + + s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save)); + + for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++) + irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM); + + for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) { + grp->con = __raw_readl(S5P64X0_EINT12CON + (i * 4)); + grp->mask = __raw_readl(S5P64X0_EINT12MASK + (i * 4)); + grp->fltcon = __raw_readl(S5P64X0_EINT12FLTCON + (i * 4)); + } + + return 0; +} + +static void s5p64x0_irq_pm_resume(void) +{ + struct irq_grp_save *grp = eint_grp_save; + int i; + + S3C_PMDBG("%s: resuming IRQs\n", __func__); + + s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save)); + + for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++) + __raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM); + + for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) { + __raw_writel(grp->con, S5P64X0_EINT12CON + (i * 4)); + __raw_writel(grp->mask, S5P64X0_EINT12MASK + (i * 4)); + __raw_writel(grp->fltcon, S5P64X0_EINT12FLTCON + (i * 4)); + } + + S3C_PMDBG("%s: IRQ configuration restored\n", __func__); +} + +static struct syscore_ops s5p64x0_irq_syscore_ops = { + .suspend = s5p64x0_irq_pm_suspend, + .resume = s5p64x0_irq_pm_resume, +}; + +static int __init s5p64x0_syscore_init(void) +{ + register_syscore_ops(&s5p64x0_irq_syscore_ops); + + return 0; +} +core_initcall(s5p64x0_syscore_init); diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c index 3b84e9bfd07..4a1250cd135 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6440.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c @@ -23,6 +23,9 @@ #include <linux/clk.h> #include <linux/gpio.h> #include <linux/pwm_backlight.h> +#include <linux/fb.h> + +#include <video/platform_lcd.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -47,6 +50,8 @@ #include <plat/ts.h> #include <plat/s5p-time.h> #include <plat/backlight.h> +#include <plat/fb.h> +#include <plat/regs-fb.h> #define SMDK6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ @@ -92,6 +97,59 @@ static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = { }, }; +/* Frame Buffer */ +static struct s3c_fb_pd_win smdk6440_fb_win0 = { + .win_mode = { + .left_margin = 8, + .right_margin = 13, + .upper_margin = 7, + .lower_margin = 5, + .hsync_len = 3, + .vsync_len = 1, + .xres = 800, + .yres = 480, + }, + .max_bpp = 32, + .default_bpp = 24, +}; + +static struct s3c_fb_platdata smdk6440_lcd_pdata __initdata = { + .win[0] = &smdk6440_fb_win0, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, + .setup_gpio = s5p64x0_fb_gpio_setup_24bpp, +}; + +/* LCD power controller */ +static void smdk6440_lte480_reset_power(struct plat_lcd_data *pd, + unsigned int power) +{ + int err; + + if (power) { + err = gpio_request(S5P6440_GPN(5), "GPN"); + if (err) { + printk(KERN_ERR "failed to request GPN for lcd reset\n"); + return; + } + + gpio_direction_output(S5P6440_GPN(5), 1); + gpio_set_value(S5P6440_GPN(5), 0); + gpio_set_value(S5P6440_GPN(5), 1); + gpio_free(S5P6440_GPN(5)); + } +} + +static struct plat_lcd_data smdk6440_lcd_power_data = { + .set_power = smdk6440_lte480_reset_power, +}; + +static struct platform_device smdk6440_lcd_lte480wv = { + .name = "platform-lcd", + .dev.parent = &s3c_device_fb.dev, + .dev.platform_data = &smdk6440_lcd_power_data, +}; + static struct platform_device *smdk6440_devices[] __initdata = { &s3c_device_adc, &s3c_device_rtc, @@ -101,6 +159,8 @@ static struct platform_device *smdk6440_devices[] __initdata = { &s3c_device_wdt, &samsung_asoc_dma, &s5p6440_device_iis, + &s3c_device_fb, + &smdk6440_lcd_lte480wv, }; static struct s3c2410_platform_i2c s5p6440_i2c0_data __initdata = { @@ -129,12 +189,6 @@ static struct i2c_board_info smdk6440_i2c_devs1[] __initdata = { /* To be populated */ }; -static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { - .delay = 10000, - .presc = 49, - .oversampling_shift = 2, -}; - /* LCD Backlight data */ static struct samsung_bl_gpio_info smdk6440_bl_gpio_info = { .no = S5P6440_GPF(15), @@ -153,9 +207,20 @@ static void __init smdk6440_map_io(void) s5p_set_timer_source(S5P_PWM3, S5P_PWM4); } +static void s5p6440_set_lcd_interface(void) +{ + unsigned int cfg; + + /* select TFT LCD type (RGB I/F) */ + cfg = __raw_readl(S5P64X0_SPCON0); + cfg &= ~S5P64X0_SPCON0_LCD_SEL_MASK; + cfg |= S5P64X0_SPCON0_LCD_SEL_RGB; + __raw_writel(cfg, S5P64X0_SPCON0); +} + static void __init smdk6440_machine_init(void) { - s3c24xx_ts_set_platdata(&s3c_ts_platform); + s3c24xx_ts_set_platdata(NULL); s3c_i2c0_set_platdata(&s5p6440_i2c0_data); s3c_i2c1_set_platdata(&s5p6440_i2c1_data); @@ -166,6 +231,9 @@ static void __init smdk6440_machine_init(void) samsung_bl_set(&smdk6440_bl_gpio_info, &smdk6440_bl_data); + s5p6440_set_lcd_interface(); + s3c_fb_set_platdata(&smdk6440_lcd_pdata); + platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices)); } diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c index d99d29b5558..0ab129ecf00 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6450.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c @@ -23,6 +23,9 @@ #include <linux/clk.h> #include <linux/gpio.h> #include <linux/pwm_backlight.h> +#include <linux/fb.h> + +#include <video/platform_lcd.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -47,6 +50,8 @@ #include <plat/ts.h> #include <plat/s5p-time.h> #include <plat/backlight.h> +#include <plat/fb.h> +#include <plat/regs-fb.h> #define SMDK6450_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ @@ -110,6 +115,59 @@ static struct s3c2410_uartcfg smdk6450_uartcfgs[] __initdata = { #endif }; +/* Frame Buffer */ +static struct s3c_fb_pd_win smdk6450_fb_win0 = { + .win_mode = { + .left_margin = 8, + .right_margin = 13, + .upper_margin = 7, + .lower_margin = 5, + .hsync_len = 3, + .vsync_len = 1, + .xres = 800, + .yres = 480, + }, + .max_bpp = 32, + .default_bpp = 24, +}; + +static struct s3c_fb_platdata smdk6450_lcd_pdata __initdata = { + .win[0] = &smdk6450_fb_win0, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, + .setup_gpio = s5p64x0_fb_gpio_setup_24bpp, +}; + +/* LCD power controller */ +static void smdk6450_lte480_reset_power(struct plat_lcd_data *pd, + unsigned int power) +{ + int err; + + if (power) { + err = gpio_request(S5P6450_GPN(5), "GPN"); + if (err) { + printk(KERN_ERR "failed to request GPN for lcd reset\n"); + return; + } + + gpio_direction_output(S5P6450_GPN(5), 1); + gpio_set_value(S5P6450_GPN(5), 0); + gpio_set_value(S5P6450_GPN(5), 1); + gpio_free(S5P6450_GPN(5)); + } +} + +static struct plat_lcd_data smdk6450_lcd_power_data = { + .set_power = smdk6450_lte480_reset_power, +}; + +static struct platform_device smdk6450_lcd_lte480wv = { + .name = "platform-lcd", + .dev.parent = &s3c_device_fb.dev, + .dev.platform_data = &smdk6450_lcd_power_data, +}; + static struct platform_device *smdk6450_devices[] __initdata = { &s3c_device_adc, &s3c_device_rtc, @@ -119,6 +177,9 @@ static struct platform_device *smdk6450_devices[] __initdata = { &s3c_device_wdt, &samsung_asoc_dma, &s5p6450_device_iis0, + &s3c_device_fb, + &smdk6450_lcd_lte480wv, + /* s5p6450_device_spi0 will be added */ }; @@ -148,12 +209,6 @@ static struct i2c_board_info smdk6450_i2c_devs1[] __initdata = { { I2C_BOARD_INFO("24c128", 0x57), },/* Samsung S524AD0XD1 EEPROM */ }; -static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { - .delay = 10000, - .presc = 49, - .oversampling_shift = 2, -}; - /* LCD Backlight data */ static struct samsung_bl_gpio_info smdk6450_bl_gpio_info = { .no = S5P6450_GPF(15), @@ -172,9 +227,20 @@ static void __init smdk6450_map_io(void) s5p_set_timer_source(S5P_PWM3, S5P_PWM4); } +static void s5p6450_set_lcd_interface(void) +{ + unsigned int cfg; + + /* select TFT LCD type (RGB I/F) */ + cfg = __raw_readl(S5P64X0_SPCON0); + cfg &= ~S5P64X0_SPCON0_LCD_SEL_MASK; + cfg |= S5P64X0_SPCON0_LCD_SEL_RGB; + __raw_writel(cfg, S5P64X0_SPCON0); +} + static void __init smdk6450_machine_init(void) { - s3c24xx_ts_set_platdata(&s3c_ts_platform); + s3c24xx_ts_set_platdata(NULL); s3c_i2c0_set_platdata(&s5p6450_i2c0_data); s3c_i2c1_set_platdata(&s5p6450_i2c1_data); @@ -185,6 +251,9 @@ static void __init smdk6450_machine_init(void) samsung_bl_set(&smdk6450_bl_gpio_info, &smdk6450_bl_data); + s5p6450_set_lcd_interface(); + s3c_fb_set_platdata(&smdk6450_lcd_pdata); + platform_add_devices(smdk6450_devices, ARRAY_SIZE(smdk6450_devices)); } diff --git a/arch/arm/mach-s5p64x0/pm.c b/arch/arm/mach-s5p64x0/pm.c new file mode 100644 index 00000000000..69927243d25 --- /dev/null +++ b/arch/arm/mach-s5p64x0/pm.c @@ -0,0 +1,204 @@ +/* linux/arch/arm/mach-s5p64x0/pm.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P64X0 Power Management Support + * + * Based on arch/arm/mach-s3c64xx/pm.c by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/suspend.h> +#include <linux/syscore_ops.h> +#include <linux/io.h> + +#include <plat/cpu.h> +#include <plat/pm.h> +#include <plat/regs-timer.h> +#include <plat/wakeup-mask.h> + +#include <mach/regs-clock.h> +#include <mach/regs-gpio.h> + +static struct sleep_save s5p64x0_core_save[] = { + SAVE_ITEM(S5P64X0_APLL_CON), + SAVE_ITEM(S5P64X0_MPLL_CON), + SAVE_ITEM(S5P64X0_EPLL_CON), + SAVE_ITEM(S5P64X0_EPLL_CON_K), + SAVE_ITEM(S5P64X0_CLK_SRC0), + SAVE_ITEM(S5P64X0_CLK_SRC1), + SAVE_ITEM(S5P64X0_CLK_DIV0), + SAVE_ITEM(S5P64X0_CLK_DIV1), + SAVE_ITEM(S5P64X0_CLK_DIV2), + SAVE_ITEM(S5P64X0_CLK_DIV3), + SAVE_ITEM(S5P64X0_CLK_GATE_MEM0), + SAVE_ITEM(S5P64X0_CLK_GATE_HCLK1), + SAVE_ITEM(S5P64X0_CLK_GATE_SCLK1), +}; + +static struct sleep_save s5p64x0_misc_save[] = { + SAVE_ITEM(S5P64X0_AHB_CON0), + SAVE_ITEM(S5P64X0_SPCON0), + SAVE_ITEM(S5P64X0_SPCON1), + SAVE_ITEM(S5P64X0_MEM0CONSLP0), + SAVE_ITEM(S5P64X0_MEM0CONSLP1), + SAVE_ITEM(S5P64X0_MEM0DRVCON), + SAVE_ITEM(S5P64X0_MEM1DRVCON), + + SAVE_ITEM(S3C64XX_TINT_CSTAT), +}; + +/* DPLL is present only in S5P6450 */ +static struct sleep_save s5p6450_core_save[] = { + SAVE_ITEM(S5P6450_DPLL_CON), + SAVE_ITEM(S5P6450_DPLL_CON_K), +}; + +void s3c_pm_configure_extint(void) +{ + __raw_writel(s3c_irqwake_eintmask, S5P64X0_EINT_WAKEUP_MASK); +} + +void s3c_pm_restore_core(void) +{ + __raw_writel(0, S5P64X0_EINT_WAKEUP_MASK); + + s3c_pm_do_restore_core(s5p64x0_core_save, + ARRAY_SIZE(s5p64x0_core_save)); + + if (soc_is_s5p6450()) + s3c_pm_do_restore_core(s5p6450_core_save, + ARRAY_SIZE(s5p6450_core_save)); + + s3c_pm_do_restore(s5p64x0_misc_save, ARRAY_SIZE(s5p64x0_misc_save)); +} + +void s3c_pm_save_core(void) +{ + s3c_pm_do_save(s5p64x0_misc_save, ARRAY_SIZE(s5p64x0_misc_save)); + + if (soc_is_s5p6450()) + s3c_pm_do_save(s5p6450_core_save, + ARRAY_SIZE(s5p6450_core_save)); + + s3c_pm_do_save(s5p64x0_core_save, ARRAY_SIZE(s5p64x0_core_save)); +} + +static int s5p64x0_cpu_suspend(unsigned long arg) +{ + unsigned long tmp = 0; + + /* + * Issue the standby signal into the pm unit. Note, we + * issue a write-buffer drain just in case. + */ + asm("b 1f\n\t" + ".align 5\n\t" + "1:\n\t" + "mcr p15, 0, %0, c7, c10, 5\n\t" + "mcr p15, 0, %0, c7, c10, 4\n\t" + "mcr p15, 0, %0, c7, c0, 4" : : "r" (tmp)); + + /* we should never get past here */ + panic("sleep resumed to originator?"); +} + +/* mapping of interrupts to parts of the wakeup mask */ +static struct samsung_wakeup_mask s5p64x0_wake_irqs[] = { + { .irq = IRQ_RTC_ALARM, .bit = S5P64X0_PWR_CFG_RTC_ALRM_DISABLE, }, + { .irq = IRQ_RTC_TIC, .bit = S5P64X0_PWR_CFG_RTC_TICK_DISABLE, }, + { .irq = IRQ_HSMMC0, .bit = S5P64X0_PWR_CFG_MMC0_DISABLE, }, + { .irq = IRQ_HSMMC1, .bit = S5P64X0_PWR_CFG_MMC1_DISABLE, }, +}; + +static void s5p64x0_pm_prepare(void) +{ + u32 tmp; + + samsung_sync_wakemask(S5P64X0_PWR_CFG, + s5p64x0_wake_irqs, ARRAY_SIZE(s5p64x0_wake_irqs)); + + /* store the resume address in INFORM0 register */ + __raw_writel(virt_to_phys(s3c_cpu_resume), S5P64X0_INFORM0); + + /* setup clock gating for FIMGVG block */ + __raw_writel((__raw_readl(S5P64X0_CLK_GATE_HCLK1) | \ + (S5P64X0_CLK_GATE_HCLK1_FIMGVG)), S5P64X0_CLK_GATE_HCLK1); + __raw_writel((__raw_readl(S5P64X0_CLK_GATE_SCLK1) | \ + (S5P64X0_CLK_GATE_SCLK1_FIMGVG)), S5P64X0_CLK_GATE_SCLK1); + + /* Configure the stabilization counter with wait time required */ + __raw_writel(S5P64X0_PWR_STABLE_PWR_CNT_VAL4, S5P64X0_PWR_STABLE); + + /* set WFI to SLEEP mode configuration */ + tmp = __raw_readl(S5P64X0_SLEEP_CFG); + tmp &= ~(S5P64X0_SLEEP_CFG_OSC_EN); + __raw_writel(tmp, S5P64X0_SLEEP_CFG); + + tmp = __raw_readl(S5P64X0_PWR_CFG); + tmp &= ~(S5P64X0_PWR_CFG_WFI_MASK); + tmp |= S5P64X0_PWR_CFG_WFI_SLEEP; + __raw_writel(tmp, S5P64X0_PWR_CFG); + + /* + * set OTHERS register to disable interrupt before going to + * sleep. This bit is present only in S5P6450, it is reserved + * in S5P6440. + */ + if (soc_is_s5p6450()) { + tmp = __raw_readl(S5P64X0_OTHERS); + tmp |= S5P6450_OTHERS_DISABLE_INT; + __raw_writel(tmp, S5P64X0_OTHERS); + } + + /* ensure previous wakeup state is cleared before sleeping */ + __raw_writel(__raw_readl(S5P64X0_WAKEUP_STAT), S5P64X0_WAKEUP_STAT); + +} + +static int s5p64x0_pm_add(struct sys_device *sysdev) +{ + pm_cpu_prep = s5p64x0_pm_prepare; + pm_cpu_sleep = s5p64x0_cpu_suspend; + pm_uart_udivslot = 1; + + return 0; +} + +static struct sysdev_driver s5p64x0_pm_driver = { + .add = s5p64x0_pm_add, +}; + +static __init int s5p64x0_pm_drvinit(void) +{ + s3c_pm_init(); + + return sysdev_driver_register(&s5p64x0_sysclass, &s5p64x0_pm_driver); +} +arch_initcall(s5p64x0_pm_drvinit); + +static void s5p64x0_pm_resume(void) +{ + u32 tmp; + + tmp = __raw_readl(S5P64X0_OTHERS); + tmp |= (S5P64X0_OTHERS_RET_MMC0 | S5P64X0_OTHERS_RET_MMC1 | \ + S5P64X0_OTHERS_RET_UART); + __raw_writel(tmp , S5P64X0_OTHERS); +} + +static struct syscore_ops s5p64x0_pm_syscore_ops = { + .resume = s5p64x0_pm_resume, +}; + +static __init int s5p64x0_pm_syscore_init(void) +{ + register_syscore_ops(&s5p64x0_pm_syscore_ops); + + return 0; +} +arch_initcall(s5p64x0_pm_syscore_init); diff --git a/arch/arm/mach-s5p64x0/setup-fb-24bpp.c b/arch/arm/mach-s5p64x0/setup-fb-24bpp.c new file mode 100644 index 00000000000..f346ee4af54 --- /dev/null +++ b/arch/arm/mach-s5p64x0/setup-fb-24bpp.c @@ -0,0 +1,29 @@ +/* linux/arch/arm/mach-s5p64x0/setup-fb-24bpp.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Base S5P64X0 GPIO setup information for LCD framebuffer + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/fb.h> +#include <linux/gpio.h> + +#include <plat/cpu.h> +#include <plat/fb.h> +#include <plat/gpio-cfg.h> + +void s5p64x0_fb_gpio_setup_24bpp(void) +{ + if (soc_is_s5p6440()) { + s3c_gpio_cfgrange_nopull(S5P6440_GPI(0), 16, S3C_GPIO_SFN(2)); + s3c_gpio_cfgrange_nopull(S5P6440_GPJ(0), 12, S3C_GPIO_SFN(2)); + } else if (soc_is_s5p6450()) { + s3c_gpio_cfgrange_nopull(S5P6450_GPI(0), 16, S3C_GPIO_SFN(2)); + s3c_gpio_cfgrange_nopull(S5P6450_GPJ(0), 12, S3C_GPIO_SFN(2)); + } +} diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig index e8a33c4b054..e538a4c67e9 100644 --- a/arch/arm/mach-s5pc100/Kconfig +++ b/arch/arm/mach-s5pc100/Kconfig @@ -10,7 +10,7 @@ if ARCH_S5PC100 config CPU_S5PC100 bool select S5P_EXT_INT - select S3C_PL330_DMA + select SAMSUNG_DMADEV help Enable S5PC100 CPU support diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c index ff5cbb30de5..8d47709da71 100644 --- a/arch/arm/mach-s5pc100/clock.c +++ b/arch/arm/mach-s5pc100/clock.c @@ -33,6 +33,11 @@ static struct clk s5p_clk_otgphy = { .name = "otg_phy", }; +static struct clk dummy_apb_pclk = { + .name = "apb_pclk", + .id = -1, +}; + static struct clk *clk_src_mout_href_list[] = { [0] = &s5p_clk_27m, [1] = &clk_fin_hpll, @@ -454,14 +459,14 @@ static struct clk init_clocks_off[] = { .enable = s5pc100_d1_0_ctrl, .ctrlbit = (1 << 2), }, { - .name = "pdma", - .devname = "s3c-pl330.1", + .name = "dma", + .devname = "dma-pl330.1", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_0_ctrl, .ctrlbit = (1 << 1), }, { - .name = "pdma", - .devname = "s3c-pl330.0", + .name = "dma", + .devname = "dma-pl330.0", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_0_ctrl, .ctrlbit = (1 << 0), @@ -1276,5 +1281,7 @@ void __init s5pc100_register_clocks(void) s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c24xx_register_clock(&dummy_apb_pclk); + s3c_pwmclk_init(); } diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c index bf4cd0fb97c..065a087f5a8 100644 --- a/arch/arm/mach-s5pc100/dma.c +++ b/arch/arm/mach-s5pc100/dma.c @@ -1,4 +1,8 @@ -/* +/* linux/arch/arm/mach-s5pc100/dma.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * * Copyright (C) 2010 Samsung Electronics Co. Ltd. * Jaswinder Singh <jassi.brar@samsung.com> * @@ -17,150 +21,246 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/amba/bus.h> +#include <linux/amba/pl330.h> +#include <asm/irq.h> #include <plat/devs.h> +#include <plat/irqs.h> #include <mach/map.h> #include <mach/irqs.h> - -#include <plat/s3c-pl330-pdata.h> +#include <mach/dma.h> static u64 dma_dmamask = DMA_BIT_MASK(32); -static struct resource s5pc100_pdma0_resource[] = { - [0] = { - .start = S5PC100_PA_PDMA0, - .end = S5PC100_PA_PDMA0 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PDMA0, - .end = IRQ_PDMA0, - .flags = IORESOURCE_IRQ, +struct dma_pl330_peri pdma0_peri[30] = { + { + .peri_id = (u8)DMACH_UART0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART3_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART3_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = DMACH_IRDA, + }, { + .peri_id = (u8)DMACH_I2S0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S0S_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_AC97_MICIN, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_AC97_PCMIN, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_AC97_PCMOUT, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_EXTERNAL, + }, { + .peri_id = (u8)DMACH_PWM, + }, { + .peri_id = (u8)DMACH_SPDIF, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_HSI_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_HSI_TX, + .rqtype = MEMTODEV, }, }; -static struct s3c_pl330_platdata s5pc100_pdma0_pdata = { - .peri = { - [0] = DMACH_UART0_RX, - [1] = DMACH_UART0_TX, - [2] = DMACH_UART1_RX, - [3] = DMACH_UART1_TX, - [4] = DMACH_UART2_RX, - [5] = DMACH_UART2_TX, - [6] = DMACH_UART3_RX, - [7] = DMACH_UART3_TX, - [8] = DMACH_IRDA, - [9] = DMACH_I2S0_RX, - [10] = DMACH_I2S0_TX, - [11] = DMACH_I2S0S_TX, - [12] = DMACH_I2S1_RX, - [13] = DMACH_I2S1_TX, - [14] = DMACH_I2S2_RX, - [15] = DMACH_I2S2_TX, - [16] = DMACH_SPI0_RX, - [17] = DMACH_SPI0_TX, - [18] = DMACH_SPI1_RX, - [19] = DMACH_SPI1_TX, - [20] = DMACH_SPI2_RX, - [21] = DMACH_SPI2_TX, - [22] = DMACH_AC97_MICIN, - [23] = DMACH_AC97_PCMIN, - [24] = DMACH_AC97_PCMOUT, - [25] = DMACH_EXTERNAL, - [26] = DMACH_PWM, - [27] = DMACH_SPDIF, - [28] = DMACH_HSI_RX, - [29] = DMACH_HSI_TX, - [30] = DMACH_MAX, - [31] = DMACH_MAX, - }, +struct dma_pl330_platdata s5pc100_pdma0_pdata = { + .nr_valid_peri = ARRAY_SIZE(pdma0_peri), + .peri = pdma0_peri, }; -static struct platform_device s5pc100_device_pdma0 = { - .name = "s3c-pl330", - .id = 0, - .num_resources = ARRAY_SIZE(s5pc100_pdma0_resource), - .resource = s5pc100_pdma0_resource, - .dev = { +struct amba_device s5pc100_device_pdma0 = { + .dev = { + .init_name = "dma-pl330.0", .dma_mask = &dma_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &s5pc100_pdma0_pdata, }, -}; - -static struct resource s5pc100_pdma1_resource[] = { - [0] = { - .start = S5PC100_PA_PDMA1, - .end = S5PC100_PA_PDMA1 + SZ_4K, + .res = { + .start = S5PC100_PA_PDMA0, + .end = S5PC100_PA_PDMA0 + SZ_4K, .flags = IORESOURCE_MEM, }, - [1] = { - .start = IRQ_PDMA1, - .end = IRQ_PDMA1, - .flags = IORESOURCE_IRQ, - }, + .irq = {IRQ_PDMA0, NO_IRQ}, + .periphid = 0x00041330, }; -static struct s3c_pl330_platdata s5pc100_pdma1_pdata = { - .peri = { - [0] = DMACH_UART0_RX, - [1] = DMACH_UART0_TX, - [2] = DMACH_UART1_RX, - [3] = DMACH_UART1_TX, - [4] = DMACH_UART2_RX, - [5] = DMACH_UART2_TX, - [6] = DMACH_UART3_RX, - [7] = DMACH_UART3_TX, - [8] = DMACH_IRDA, - [9] = DMACH_I2S0_RX, - [10] = DMACH_I2S0_TX, - [11] = DMACH_I2S0S_TX, - [12] = DMACH_I2S1_RX, - [13] = DMACH_I2S1_TX, - [14] = DMACH_I2S2_RX, - [15] = DMACH_I2S2_TX, - [16] = DMACH_SPI0_RX, - [17] = DMACH_SPI0_TX, - [18] = DMACH_SPI1_RX, - [19] = DMACH_SPI1_TX, - [20] = DMACH_SPI2_RX, - [21] = DMACH_SPI2_TX, - [22] = DMACH_PCM0_RX, - [23] = DMACH_PCM0_TX, - [24] = DMACH_PCM1_RX, - [25] = DMACH_PCM1_TX, - [26] = DMACH_MSM_REQ0, - [27] = DMACH_MSM_REQ1, - [28] = DMACH_MSM_REQ2, - [29] = DMACH_MSM_REQ3, - [30] = DMACH_MAX, - [31] = DMACH_MAX, +struct dma_pl330_peri pdma1_peri[30] = { + { + .peri_id = (u8)DMACH_UART0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART3_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART3_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = DMACH_IRDA, + }, { + .peri_id = (u8)DMACH_I2S0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S0S_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_MSM_REQ0, + }, { + .peri_id = (u8)DMACH_MSM_REQ1, + }, { + .peri_id = (u8)DMACH_MSM_REQ2, + }, { + .peri_id = (u8)DMACH_MSM_REQ3, }, }; -static struct platform_device s5pc100_device_pdma1 = { - .name = "s3c-pl330", - .id = 1, - .num_resources = ARRAY_SIZE(s5pc100_pdma1_resource), - .resource = s5pc100_pdma1_resource, - .dev = { +struct dma_pl330_platdata s5pc100_pdma1_pdata = { + .nr_valid_peri = ARRAY_SIZE(pdma1_peri), + .peri = pdma1_peri, +}; + +struct amba_device s5pc100_device_pdma1 = { + .dev = { + .init_name = "dma-pl330.1", .dma_mask = &dma_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &s5pc100_pdma1_pdata, }, -}; - -static struct platform_device *s5pc100_dmacs[] __initdata = { - &s5pc100_device_pdma0, - &s5pc100_device_pdma1, + .res = { + .start = S5PC100_PA_PDMA1, + .end = S5PC100_PA_PDMA1 + SZ_4K, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_PDMA1, NO_IRQ}, + .periphid = 0x00041330, }; static int __init s5pc100_dma_init(void) { - platform_add_devices(s5pc100_dmacs, ARRAY_SIZE(s5pc100_dmacs)); + amba_device_register(&s5pc100_device_pdma0, &iomem_resource); + amba_device_register(&s5pc100_device_pdma1, &iomem_resource); return 0; } diff --git a/arch/arm/mach-s5pc100/include/mach/clkdev.h b/arch/arm/mach-s5pc100/include/mach/clkdev.h deleted file mode 100644 index 7dffa83d23f..00000000000 --- a/arch/arm/mach-s5pc100/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __MACH_CLKDEV_H__ -#define __MACH_CLKDEV_H__ - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do {} while (0) - -#endif diff --git a/arch/arm/mach-s5pc100/include/mach/dma.h b/arch/arm/mach-s5pc100/include/mach/dma.h index 81209eb1409..201842a3769 100644 --- a/arch/arm/mach-s5pc100/include/mach/dma.h +++ b/arch/arm/mach-s5pc100/include/mach/dma.h @@ -20,7 +20,7 @@ #ifndef __MACH_DMA_H #define __MACH_DMA_H -/* This platform uses the common S3C DMA API driver for PL330 */ -#include <plat/s3c-dma-pl330.h> +/* This platform uses the common DMA API driver for PL330 */ +#include <plat/dma-pl330.h> #endif /* __MACH_DMA_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/pwm-clock.h b/arch/arm/mach-s5pc100/include/mach/pwm-clock.h deleted file mode 100644 index b34d2f7aae5..00000000000 --- a/arch/arm/mach-s5pc100/include/mach/pwm-clock.h +++ /dev/null @@ -1,56 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/include/mach/pwm-clock.h - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * S5PC100 - pwm clock and timer support - * - * Based on mach-s3c6400/include/mach/pwm-clock.h - */ - -/** - * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk - * @tcfg: The timer TCFG1 register bits shifted down to 0. - * - * Return true if the given configuration from TCFG1 is a TCLK instead - * any of the TDIV clocks. - */ -static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) -{ - return tcfg >= S3C64XX_TCFG1_MUX_TCLK; -} - -/** - * tcfg_to_divisor() - convert tcfg1 setting to a divisor - * @tcfg1: The tcfg1 setting, shifted down. - * - * Get the divisor value for the given tcfg1 setting. We assume the - * caller has already checked to see if this is not a TCLK source. - */ -static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) -{ - return 1 << tcfg1; -} - -/** - * pwm_tdiv_has_div1() - does the tdiv setting have a /1 - * - * Return true if we have a /1 in the tdiv setting. - */ -static inline unsigned int pwm_tdiv_has_div1(void) -{ - return 1; -} - -/** - * pwm_tdiv_div_bits() - calculate TCFG1 divisor value. - * @div: The divisor to calculate the bit information for. - * - * Turn a divisor into the necessary bit field for TCFG1. - */ -static inline unsigned long pwm_tdiv_div_bits(unsigned int div) -{ - return ilog2(div); -} - -#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c index 688f45b7cd0..26f5c91c942 100644 --- a/arch/arm/mach-s5pc100/mach-smdkc100.c +++ b/arch/arm/mach-s5pc100/mach-smdkc100.c @@ -203,12 +203,6 @@ static struct platform_device *smdkc100_devices[] __initdata = { &s5pc100_device_spdif, }; -static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { - .delay = 10000, - .presc = 49, - .oversampling_shift = 2, -}; - /* LCD Backlight data */ static struct samsung_bl_gpio_info smdkc100_bl_gpio_info = { .no = S5PC100_GPD(0), @@ -228,7 +222,7 @@ static void __init smdkc100_map_io(void) static void __init smdkc100_machine_init(void) { - s3c24xx_ts_set_platdata(&s3c_ts_platform); + s3c24xx_ts_set_platdata(NULL); /* I2C */ s3c_i2c0_set_platdata(NULL); diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c index be25879bb2e..6418c6e8a7b 100644 --- a/arch/arm/mach-s5pc100/setup-sdhci.c +++ b/arch/arm/mach-s5pc100/setup-sdhci.c @@ -11,17 +11,7 @@ * published by the Free Software Foundation. */ -#include <linux/kernel.h> #include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <linux/mmc/card.h> -#include <linux/mmc/host.h> - -#include <plat/regs-sdhci.h> -#include <plat/sdhci.h> /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ @@ -31,35 +21,3 @@ char *s5pc100_hsmmc_clksrcs[4] = { [2] = "sclk_mmc", /* mmc_bus */ /* [3] = "48m", - note not successfully used yet */ }; - - -void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card) -{ - u32 ctrl2, ctrl3; - - /* don't need to alter anything according to card-type */ - - writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4); - - ctrl2 = readl(r + S3C_SDHCI_CONTROL2); - ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK; - ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR | - S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK | - S3C_SDHCI_CTRL2_ENFBCLKRX | - S3C_SDHCI_CTRL2_DFCNT_NONE | - S3C_SDHCI_CTRL2_ENCLKOUTHOLD); - - if (ios->clock < 25 * 1000000) - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 | - S3C_SDHCI_CTRL3_FCSEL2 | - S3C_SDHCI_CTRL3_FCSEL1 | - S3C_SDHCI_CTRL3_FCSEL0); - else - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0); - - writel(ctrl2, r + S3C_SDHCI_CONTROL2); - writel(ctrl3, r + S3C_SDHCI_CONTROL3); -} diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 69dd87cd8e2..646057ab2e4 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -11,10 +11,11 @@ if ARCH_S5PV210 config CPU_S5PV210 bool - select S3C_PL330_DMA + select SAMSUNG_DMADEV select S5P_EXT_INT select S5P_HRT - select S5PV210_PM if PM + select S5P_PM if PM + select S5P_SLEEP if PM help Enable S5PV210 CPU support @@ -94,11 +95,13 @@ config MACH_GONI select S3C_DEV_USB_HSOTG select S5P_DEV_ONENAND select SAMSUNG_DEV_KEYPAD + select S5P_DEV_TV select S5PV210_SETUP_FB_24BPP select S5PV210_SETUP_I2C1 select S5PV210_SETUP_I2C2 select S5PV210_SETUP_KEYPAD select S5PV210_SETUP_SDHCI + select S5PV210_SETUP_FIMC help Machine support for Samsung GONI board S5PC110(MCP) is one of package option of S5PV210 @@ -169,9 +172,4 @@ config MACH_TORBRECK endmenu -config S5PV210_PM - bool - help - Power Management code common to S5PV210 - endif diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile index 599a3c0e8f6..009fbe53df9 100644 --- a/arch/arm/mach-s5pv210/Makefile +++ b/arch/arm/mach-s5pv210/Makefile @@ -14,7 +14,7 @@ obj- := obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o dma.o obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o -obj-$(CONFIG_S5PV210_PM) += pm.o sleep.o +obj-$(CONFIG_PM) += pm.o # machine support diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index 52a8e607bcc..4c5ac7a69e9 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -174,6 +174,16 @@ static int s5pv210_clk_mask1_ctrl(struct clk *clk, int enable) return s5p_gatectrl(S5P_CLK_SRC_MASK1, clk, enable); } +static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable); +} + +static int exynos4_clk_dac_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable); +} + static struct clk clk_sclk_hdmi27m = { .name = "sclk_hdmi27m", .rate = 27000000, @@ -203,6 +213,11 @@ static struct clk clk_pcmcdclk2 = { .name = "pcmcdclk", }; +static struct clk dummy_apb_pclk = { + .name = "apb_pclk", + .id = -1, +}; + static struct clk *clkset_vpllsrc_list[] = { [0] = &clk_fin_vpll, [1] = &clk_sclk_hdmi27m, @@ -289,14 +304,14 @@ static struct clk_ops clk_fout_apll_ops = { static struct clk init_clocks_off[] = { { - .name = "pdma", - .devname = "s3c-pl330.0", + .name = "dma", + .devname = "dma-pl330.0", .parent = &clk_hclk_psys.clk, .enable = s5pv210_clk_ip0_ctrl, .ctrlbit = (1 << 3), }, { - .name = "pdma", - .devname = "s3c-pl330.1", + .name = "dma", + .devname = "dma-pl330.1", .parent = &clk_hclk_psys.clk, .enable = s5pv210_clk_ip0_ctrl, .ctrlbit = (1 << 4), @@ -330,6 +345,40 @@ static struct clk init_clocks_off[] = { .enable = s5pv210_clk_ip0_ctrl, .ctrlbit = (1 << 16), }, { + .name = "dac", + .devname = "s5p-sdo", + .parent = &clk_hclk_dsys.clk, + .enable = s5pv210_clk_ip1_ctrl, + .ctrlbit = (1 << 10), + }, { + .name = "mixer", + .devname = "s5p-mixer", + .parent = &clk_hclk_dsys.clk, + .enable = s5pv210_clk_ip1_ctrl, + .ctrlbit = (1 << 9), + }, { + .name = "vp", + .devname = "s5p-mixer", + .parent = &clk_hclk_dsys.clk, + .enable = s5pv210_clk_ip1_ctrl, + .ctrlbit = (1 << 8), + }, { + .name = "hdmi", + .devname = "s5pv210-hdmi", + .parent = &clk_hclk_dsys.clk, + .enable = s5pv210_clk_ip1_ctrl, + .ctrlbit = (1 << 11), + }, { + .name = "hdmiphy", + .devname = "s5pv210-hdmi", + .enable = exynos4_clk_hdmiphy_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "dacphy", + .devname = "s5p-sdo", + .enable = exynos4_clk_dac_ctrl, + .ctrlbit = (1 << 0), + }, { .name = "otg", .parent = &clk_hclk_psys.clk, .enable = s5pv210_clk_ip1_ctrl, @@ -407,6 +456,12 @@ static struct clk init_clocks_off[] = { .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<9), }, { + .name = "i2c", + .devname = "s3c2440-hdmiphy-i2c", + .parent = &clk_pclk_psys.clk, + .enable = s5pv210_clk_ip3_ctrl, + .ctrlbit = (1 << 11), + }, { .name = "spi", .devname = "s3c64xx-spi.0", .parent = &clk_pclk_psys.clk, @@ -594,6 +649,23 @@ static struct clksrc_sources clkset_sclk_mixer = { .nr_sources = ARRAY_SIZE(clkset_sclk_mixer_list), }; +static struct clksrc_clk clk_sclk_mixer = { + .clk = { + .name = "sclk_mixer", + .enable = s5pv210_clk_mask0_ctrl, + .ctrlbit = (1 << 1), + }, + .sources = &clkset_sclk_mixer, + .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 }, +}; + +static struct clksrc_clk *sclk_tv[] = { + &clk_sclk_dac, + &clk_sclk_pixel, + &clk_sclk_hdmi, + &clk_sclk_mixer, +}; + static struct clk *clkset_sclk_audio0_list[] = { [0] = &clk_ext_xtal_mux, [1] = &clk_pcmcdclk0, @@ -777,14 +849,6 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV4, .shift = 28, .size = 4 }, }, { .clk = { - .name = "sclk_mixer", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 1), - }, - .sources = &clkset_sclk_mixer, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 }, - }, { - .clk = { .name = "sclk_fimc", .devname = "s5pv210-fimc.0", .enable = s5pv210_clk_mask1_ctrl, @@ -815,8 +879,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "s5pv210-fimc.0", + .name = "sclk_cam0", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 3), }, @@ -825,8 +888,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "s5pv210-fimc.1", + .name = "sclk_cam1", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 4), }, @@ -975,9 +1037,6 @@ static struct clksrc_clk *sysclks[] = { &clk_pclk_psys, &clk_vpllsrc, &clk_sclk_vpll, - &clk_sclk_dac, - &clk_sclk_pixel, - &clk_sclk_hdmi, &clk_mout_dmc0, &clk_sclk_dmc0, &clk_sclk_audio0, @@ -1062,6 +1121,61 @@ static struct clk_ops s5pv210_epll_ops = { .get_rate = s5p_epll_get_rate, }; +static u32 vpll_div[][5] = { + { 54000000, 3, 53, 3, 0 }, + { 108000000, 3, 53, 2, 0 }, +}; + +static unsigned long s5pv210_vpll_get_rate(struct clk *clk) +{ + return clk->rate; +} + +static int s5pv210_vpll_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned int vpll_con; + unsigned int i; + + /* Return if nothing changed */ + if (clk->rate == rate) + return 0; + + vpll_con = __raw_readl(S5P_VPLL_CON); + vpll_con &= ~(0x1 << 27 | \ + PLL90XX_MDIV_MASK << PLL90XX_MDIV_SHIFT | \ + PLL90XX_PDIV_MASK << PLL90XX_PDIV_SHIFT | \ + PLL90XX_SDIV_MASK << PLL90XX_SDIV_SHIFT); + + for (i = 0; i < ARRAY_SIZE(vpll_div); i++) { + if (vpll_div[i][0] == rate) { + vpll_con |= vpll_div[i][1] << PLL90XX_PDIV_SHIFT; + vpll_con |= vpll_div[i][2] << PLL90XX_MDIV_SHIFT; + vpll_con |= vpll_div[i][3] << PLL90XX_SDIV_SHIFT; + vpll_con |= vpll_div[i][4] << 27; + break; + } + } + + if (i == ARRAY_SIZE(vpll_div)) { + printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n", + __func__); + return -EINVAL; + } + + __raw_writel(vpll_con, S5P_VPLL_CON); + + /* Wait for VPLL lock */ + while (!(__raw_readl(S5P_VPLL_CON) & (1 << PLL90XX_LOCKED_SHIFT))) + continue; + + clk->rate = rate; + return 0; +} +static struct clk_ops s5pv210_vpll_ops = { + .get_rate = s5pv210_vpll_get_rate, + .set_rate = s5pv210_vpll_set_rate, +}; + void __init_or_cpufreq s5pv210_setup_clocks(void) { struct clk *xtal_clk; @@ -1110,6 +1224,7 @@ void __init_or_cpufreq s5pv210_setup_clocks(void) clk_fout_apll.ops = &clk_fout_apll_ops; clk_fout_mpll.rate = mpll; clk_fout_epll.rate = epll; + clk_fout_vpll.ops = &s5pv210_vpll_ops; clk_fout_vpll.rate = vpll; printk(KERN_INFO "S5PV210: PLL settings, A=%ld, M=%ld, E=%ld V=%ld", @@ -1155,11 +1270,15 @@ void __init s5pv210_register_clocks(void) for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) s3c_register_clksrc(sysclks[ptr], 1); + for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++) + s3c_register_clksrc(sclk_tv[ptr], 1); + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c24xx_register_clock(&dummy_apb_pclk); s3c_pwmclk_init(); } diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c index 91145720822..84ec7463323 100644 --- a/arch/arm/mach-s5pv210/cpu.c +++ b/arch/arm/mach-s5pv210/cpu.c @@ -42,6 +42,7 @@ #include <plat/keypad-core.h> #include <plat/sdhci.h> #include <plat/reset.h> +#include <plat/tv-core.h> /* Initial IO mappings */ @@ -145,6 +146,9 @@ void __init s5pv210_map_io(void) /* Use s5pv210-keypad instead of samsung-keypad */ samsung_keypad_setname("s5pv210-keypad"); + + /* setup TV devices */ + s5p_hdmi_setname("s5pv210-hdmi"); } void __init s5pv210_init_clocks(int xtal) diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c index 497d3439a14..86b749c18b7 100644 --- a/arch/arm/mach-s5pv210/dma.c +++ b/arch/arm/mach-s5pv210/dma.c @@ -1,4 +1,8 @@ -/* +/* linux/arch/arm/mach-s5pv210/dma.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * * Copyright (C) 2010 Samsung Electronics Co. Ltd. * Jaswinder Singh <jassi.brar@samsung.com> * @@ -17,151 +21,240 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/amba/bus.h> +#include <linux/amba/pl330.h> +#include <asm/irq.h> #include <plat/devs.h> #include <plat/irqs.h> #include <mach/map.h> #include <mach/irqs.h> - -#include <plat/s3c-pl330-pdata.h> +#include <mach/dma.h> static u64 dma_dmamask = DMA_BIT_MASK(32); -static struct resource s5pv210_pdma0_resource[] = { - [0] = { - .start = S5PV210_PA_PDMA0, - .end = S5PV210_PA_PDMA0 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PDMA0, - .end = IRQ_PDMA0, - .flags = IORESOURCE_IRQ, +struct dma_pl330_peri pdma0_peri[28] = { + { + .peri_id = (u8)DMACH_UART0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART3_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART3_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = DMACH_MAX, + }, { + .peri_id = (u8)DMACH_I2S0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S0S_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_SPI0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_AC97_MICIN, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_AC97_PCMIN, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_AC97_PCMOUT, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_PWM, + }, { + .peri_id = (u8)DMACH_SPDIF, + .rqtype = MEMTODEV, }, }; -static struct s3c_pl330_platdata s5pv210_pdma0_pdata = { - .peri = { - [0] = DMACH_UART0_RX, - [1] = DMACH_UART0_TX, - [2] = DMACH_UART1_RX, - [3] = DMACH_UART1_TX, - [4] = DMACH_UART2_RX, - [5] = DMACH_UART2_TX, - [6] = DMACH_UART3_RX, - [7] = DMACH_UART3_TX, - [8] = DMACH_MAX, - [9] = DMACH_I2S0_RX, - [10] = DMACH_I2S0_TX, - [11] = DMACH_I2S0S_TX, - [12] = DMACH_I2S1_RX, - [13] = DMACH_I2S1_TX, - [14] = DMACH_MAX, - [15] = DMACH_MAX, - [16] = DMACH_SPI0_RX, - [17] = DMACH_SPI0_TX, - [18] = DMACH_SPI1_RX, - [19] = DMACH_SPI1_TX, - [20] = DMACH_MAX, - [21] = DMACH_MAX, - [22] = DMACH_AC97_MICIN, - [23] = DMACH_AC97_PCMIN, - [24] = DMACH_AC97_PCMOUT, - [25] = DMACH_MAX, - [26] = DMACH_PWM, - [27] = DMACH_SPDIF, - [28] = DMACH_MAX, - [29] = DMACH_MAX, - [30] = DMACH_MAX, - [31] = DMACH_MAX, - }, +struct dma_pl330_platdata s5pv210_pdma0_pdata = { + .nr_valid_peri = ARRAY_SIZE(pdma0_peri), + .peri = pdma0_peri, }; -static struct platform_device s5pv210_device_pdma0 = { - .name = "s3c-pl330", - .id = 0, - .num_resources = ARRAY_SIZE(s5pv210_pdma0_resource), - .resource = s5pv210_pdma0_resource, - .dev = { +struct amba_device s5pv210_device_pdma0 = { + .dev = { + .init_name = "dma-pl330.0", .dma_mask = &dma_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &s5pv210_pdma0_pdata, }, -}; - -static struct resource s5pv210_pdma1_resource[] = { - [0] = { - .start = S5PV210_PA_PDMA1, - .end = S5PV210_PA_PDMA1 + SZ_4K, + .res = { + .start = S5PV210_PA_PDMA0, + .end = S5PV210_PA_PDMA0 + SZ_4K, .flags = IORESOURCE_MEM, }, - [1] = { - .start = IRQ_PDMA1, - .end = IRQ_PDMA1, - .flags = IORESOURCE_IRQ, - }, + .irq = {IRQ_PDMA0, NO_IRQ}, + .periphid = 0x00041330, }; -static struct s3c_pl330_platdata s5pv210_pdma1_pdata = { - .peri = { - [0] = DMACH_UART0_RX, - [1] = DMACH_UART0_TX, - [2] = DMACH_UART1_RX, - [3] = DMACH_UART1_TX, - [4] = DMACH_UART2_RX, - [5] = DMACH_UART2_TX, - [6] = DMACH_UART3_RX, - [7] = DMACH_UART3_TX, - [8] = DMACH_MAX, - [9] = DMACH_I2S0_RX, - [10] = DMACH_I2S0_TX, - [11] = DMACH_I2S0S_TX, - [12] = DMACH_I2S1_RX, - [13] = DMACH_I2S1_TX, - [14] = DMACH_I2S2_RX, - [15] = DMACH_I2S2_TX, - [16] = DMACH_SPI0_RX, - [17] = DMACH_SPI0_TX, - [18] = DMACH_SPI1_RX, - [19] = DMACH_SPI1_TX, - [20] = DMACH_MAX, - [21] = DMACH_MAX, - [22] = DMACH_PCM0_RX, - [23] = DMACH_PCM0_TX, - [24] = DMACH_PCM1_RX, - [25] = DMACH_PCM1_TX, - [26] = DMACH_MSM_REQ0, - [27] = DMACH_MSM_REQ1, - [28] = DMACH_MSM_REQ2, - [29] = DMACH_MSM_REQ3, - [30] = DMACH_PCM2_RX, - [31] = DMACH_PCM2_TX, +struct dma_pl330_peri pdma1_peri[32] = { + { + .peri_id = (u8)DMACH_UART0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART3_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART3_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = DMACH_MAX, + }, { + .peri_id = (u8)DMACH_I2S0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S0S_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_PCM0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_MSM_REQ0, + }, { + .peri_id = (u8)DMACH_MSM_REQ1, + }, { + .peri_id = (u8)DMACH_MSM_REQ2, + }, { + .peri_id = (u8)DMACH_MSM_REQ3, + }, { + .peri_id = (u8)DMACH_PCM2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM2_TX, + .rqtype = MEMTODEV, }, }; -static struct platform_device s5pv210_device_pdma1 = { - .name = "s3c-pl330", - .id = 1, - .num_resources = ARRAY_SIZE(s5pv210_pdma1_resource), - .resource = s5pv210_pdma1_resource, - .dev = { +struct dma_pl330_platdata s5pv210_pdma1_pdata = { + .nr_valid_peri = ARRAY_SIZE(pdma1_peri), + .peri = pdma1_peri, +}; + +struct amba_device s5pv210_device_pdma1 = { + .dev = { + .init_name = "dma-pl330.1", .dma_mask = &dma_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &s5pv210_pdma1_pdata, }, -}; - -static struct platform_device *s5pv210_dmacs[] __initdata = { - &s5pv210_device_pdma0, - &s5pv210_device_pdma1, + .res = { + .start = S5PV210_PA_PDMA1, + .end = S5PV210_PA_PDMA1 + SZ_4K, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_PDMA1, NO_IRQ}, + .periphid = 0x00041330, }; static int __init s5pv210_dma_init(void) { - platform_add_devices(s5pv210_dmacs, ARRAY_SIZE(s5pv210_dmacs)); + amba_device_register(&s5pv210_device_pdma0, &iomem_resource); + amba_device_register(&s5pv210_device_pdma1, &iomem_resource); return 0; } diff --git a/arch/arm/mach-s5pv210/include/mach/clkdev.h b/arch/arm/mach-s5pv210/include/mach/clkdev.h deleted file mode 100644 index 7dffa83d23f..00000000000 --- a/arch/arm/mach-s5pv210/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __MACH_CLKDEV_H__ -#define __MACH_CLKDEV_H__ - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do {} while (0) - -#endif diff --git a/arch/arm/mach-s5pv210/include/mach/dma.h b/arch/arm/mach-s5pv210/include/mach/dma.h index 81209eb1409..201842a3769 100644 --- a/arch/arm/mach-s5pv210/include/mach/dma.h +++ b/arch/arm/mach-s5pv210/include/mach/dma.h @@ -20,7 +20,7 @@ #ifndef __MACH_DMA_H #define __MACH_DMA_H -/* This platform uses the common S3C DMA API driver for PL330 */ -#include <plat/s3c-dma-pl330.h> +/* This platform uses the common DMA API driver for PL330 */ +#include <plat/dma-pl330.h> #endif /* __MACH_DMA_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h index b9f9ec33384..5e0de3a31f3 100644 --- a/arch/arm/mach-s5pv210/include/mach/irqs.h +++ b/arch/arm/mach-s5pv210/include/mach/irqs.h @@ -56,7 +56,7 @@ #define IRQ_SPI2 S5P_IRQ_VIC1(17) #define IRQ_IRDA S5P_IRQ_VIC1(18) #define IRQ_IIC2 S5P_IRQ_VIC1(19) -#define IRQ_IIC3 S5P_IRQ_VIC1(20) +#define IRQ_IIC_HDMIPHY S5P_IRQ_VIC1(20) #define IRQ_HSIRX S5P_IRQ_VIC1(21) #define IRQ_HSITX S5P_IRQ_VIC1(22) #define IRQ_UHOST S5P_IRQ_VIC1(23) @@ -86,7 +86,7 @@ #define IRQ_HDMI S5P_IRQ_VIC2(12) #define IRQ_IIC1 S5P_IRQ_VIC2(13) #define IRQ_MFC S5P_IRQ_VIC2(14) -#define IRQ_TVENC S5P_IRQ_VIC2(15) +#define IRQ_SDO S5P_IRQ_VIC2(15) #define IRQ_I2S0 S5P_IRQ_VIC2(16) #define IRQ_I2S1 S5P_IRQ_VIC2(17) #define IRQ_I2S2 S5P_IRQ_VIC2(18) diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h index aac343c180b..7ff609f1568 100644 --- a/arch/arm/mach-s5pv210/include/mach/map.h +++ b/arch/arm/mach-s5pv210/include/mach/map.h @@ -90,6 +90,12 @@ #define S5PV210_PA_FIMC1 0xFB300000 #define S5PV210_PA_FIMC2 0xFB400000 +#define S5PV210_PA_SDO 0xF9000000 +#define S5PV210_PA_VP 0xF9100000 +#define S5PV210_PA_MIXER 0xF9200000 +#define S5PV210_PA_HDMI 0xFA100000 +#define S5PV210_PA_IIC_HDMIPHY 0xFA900000 + /* Compatibiltiy Defines */ #define S3C_PA_FB S5PV210_PA_FB @@ -110,6 +116,13 @@ #define S5P_PA_FIMC2 S5PV210_PA_FIMC2 #define S5P_PA_MIPI_CSIS0 S5PV210_PA_MIPI_CSIS #define S5P_PA_MFC S5PV210_PA_MFC +#define S5P_PA_IIC_HDMIPHY S5PV210_PA_IIC_HDMIPHY + +#define S5P_PA_SDO S5PV210_PA_SDO +#define S5P_PA_VP S5PV210_PA_VP +#define S5P_PA_MIXER S5PV210_PA_MIXER +#define S5P_PA_HDMI S5PV210_PA_HDMI + #define S5P_PA_ONENAND S5PC110_PA_ONENAND #define S5P_PA_ONENAND_DMA S5PC110_PA_ONENAND_DMA #define S5P_PA_SDRAM S5PV210_PA_SDRAM diff --git a/arch/arm/mach-s5pv210/include/mach/pm-core.h b/arch/arm/mach-s5pv210/include/mach/pm-core.h index 3e22109e1b7..eba8aea63ed 100644 --- a/arch/arm/mach-s5pv210/include/mach/pm-core.h +++ b/arch/arm/mach-s5pv210/include/mach/pm-core.h @@ -43,4 +43,4 @@ static inline void s3c_pm_arch_update_uart(void __iomem *regs, } static inline void s3c_pm_restored_gpios(void) { } -static inline void s3c_pm_saved_gpios(void) { } +static inline void samsung_pm_saved_gpios(void) { } diff --git a/arch/arm/mach-s5pv210/include/mach/pwm-clock.h b/arch/arm/mach-s5pv210/include/mach/pwm-clock.h deleted file mode 100644 index f8a9f1b330e..00000000000 --- a/arch/arm/mach-s5pv210/include/mach/pwm-clock.h +++ /dev/null @@ -1,70 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/pwm-clock.h - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h - * - * S5PV210 - pwm clock and timer support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_PWMCLK_H -#define __ASM_ARCH_PWMCLK_H __FILE__ - -/** - * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk - * @tcfg: The timer TCFG1 register bits shifted down to 0. - * - * Return true if the given configuration from TCFG1 is a TCLK instead - * any of the TDIV clocks. - */ -static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) -{ - return tcfg == S3C64XX_TCFG1_MUX_TCLK; -} - -/** - * tcfg_to_divisor() - convert tcfg1 setting to a divisor - * @tcfg1: The tcfg1 setting, shifted down. - * - * Get the divisor value for the given tcfg1 setting. We assume the - * caller has already checked to see if this is not a TCLK source. - */ -static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) -{ - return 1 << tcfg1; -} - -/** - * pwm_tdiv_has_div1() - does the tdiv setting have a /1 - * - * Return true if we have a /1 in the tdiv setting. - */ -static inline unsigned int pwm_tdiv_has_div1(void) -{ - return 1; -} - -/** - * pwm_tdiv_div_bits() - calculate TCFG1 divisor value. - * @div: The divisor to calculate the bit information for. - * - * Turn a divisor into the necessary bit field for TCFG1. - */ -static inline unsigned long pwm_tdiv_div_bits(unsigned int div) -{ - return ilog2(div); -} - -#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK - -#endif /* __ASM_ARCH_PWMCLK_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h index 78925c51634..032de66fb8b 100644 --- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h +++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h @@ -144,8 +144,9 @@ #define S5P_OTHERS S5P_CLKREG(0xE000) #define S5P_OM_STAT S5P_CLKREG(0xE100) +#define S5P_HDMI_PHY_CONTROL S5P_CLKREG(0xE804) #define S5P_USB_PHY_CONTROL S5P_CLKREG(0xE80C) -#define S5P_DAC_CONTROL S5P_CLKREG(0xE810) +#define S5P_DAC_PHY_CONTROL S5P_CLKREG(0xE810) #define S5P_MIPI_DPHY_CONTROL(x) S5P_CLKREG(0xE814) #define S5P_MIPI_DPHY_ENABLE (1 << 0) #define S5P_MIPI_DPHY_SRESETN (1 << 1) diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 061cc7e4f48..15edcae448b 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -48,6 +48,11 @@ #include <plat/s5p-time.h> #include <plat/mfc.h> #include <plat/regs-fb-v4.h> +#include <plat/camport.h> + +#include <media/v4l2-mediabus.h> +#include <media/s5p_fimc.h> +#include <media/noon010pc30.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define GONI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -272,6 +277,14 @@ static void __init goni_tsp_init(void) i2c2_devs[0].irq = gpio_to_irq(gpio); } +static void goni_camera_init(void) +{ + s5pv210_fimc_setup_gpio(S5P_CAMPORT_A); + + /* Set max driver strength on CAM_A_CLKOUT pin. */ + s5p_gpio_set_drvstr(S5PV210_GPE1(3), S5P_GPIO_DRVSTR_LV4); +} + /* MAX8998 regulators */ #if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE) @@ -285,6 +298,7 @@ static struct regulator_consumer_supply goni_ldo5_consumers[] = { static struct regulator_consumer_supply goni_ldo8_consumers[] = { REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), + REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"), }; static struct regulator_consumer_supply goni_ldo11_consumers[] = { @@ -475,6 +489,10 @@ static struct regulator_consumer_supply buck1_consumer = static struct regulator_consumer_supply buck2_consumer = REGULATOR_SUPPLY("vddint", NULL); +static struct regulator_consumer_supply buck3_consumer = + REGULATOR_SUPPLY("vdet", "s5p-sdo"); + + static struct regulator_init_data goni_buck1_data = { .constraints = { .name = "VARM_1.2V", @@ -511,6 +529,8 @@ static struct regulator_init_data goni_buck3_data = { .enabled = 1, }, }, + .num_consumer_supplies = 1, + .consumer_supplies = &buck3_consumer, }; static struct regulator_init_data goni_buck4_data = { @@ -801,6 +821,34 @@ static void goni_setup_sdhci(void) s3c_sdhci2_set_platdata(&goni_hsmmc2_data); }; +static struct noon010pc30_platform_data noon010pc30_pldata = { + .clk_rate = 16000000UL, + .gpio_nreset = S5PV210_GPB(2), /* CAM_CIF_NRST */ + .gpio_nstby = S5PV210_GPB(0), /* CAM_CIF_NSTBY */ +}; + +static struct i2c_board_info noon010pc30_board_info = { + I2C_BOARD_INFO("NOON010PC30", 0x60 >> 1), + .platform_data = &noon010pc30_pldata, +}; + +static struct s5p_fimc_isp_info goni_camera_sensors[] = { + { + .mux_id = 0, + .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | + V4L2_MBUS_VSYNC_ACTIVE_LOW, + .bus_type = FIMC_ITU_601, + .board_info = &noon010pc30_board_info, + .i2c_bus_num = 0, + .clk_frequency = 16000000UL, + }, +}; + +struct s5p_platform_fimc goni_fimc_md_platdata __initdata = { + .isp_info = goni_camera_sensors, + .num_clients = ARRAY_SIZE(goni_camera_sensors), +}; + static struct platform_device *goni_devices[] __initdata = { &s3c_device_fb, &s5p_device_onenand, @@ -812,10 +860,13 @@ static struct platform_device *goni_devices[] __initdata = { &s5p_device_mfc, &s5p_device_mfc_l, &s5p_device_mfc_r, + &s5p_device_mixer, + &s5p_device_sdo, &s3c_device_i2c0, &s5p_device_fimc0, &s5p_device_fimc1, &s5p_device_fimc2, + &s5p_device_fimc_md, &s3c_device_hsmmc0, &s3c_device_hsmmc1, &s3c_device_hsmmc2, @@ -884,6 +935,12 @@ static void __init goni_machine_init(void) /* FB */ s3c_fb_set_platdata(&goni_lcd_pdata); + /* FIMC */ + s3c_set_platdata(&goni_fimc_md_platdata, sizeof(goni_fimc_md_platdata), + &s5p_device_fimc_md); + + goni_camera_init(); + /* SPI */ spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index e73e3b6d41b..a9106c39239 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -265,12 +265,6 @@ static struct i2c_board_info smdkv210_i2c_devs2[] __initdata = { /* To Be Updated */ }; -static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { - .delay = 10000, - .presc = 49, - .oversampling_shift = 2, -}; - /* LCD Backlight data */ static struct samsung_bl_gpio_info smdkv210_bl_gpio_info = { .no = S5PV210_GPD0(3), @@ -296,7 +290,7 @@ static void __init smdkv210_machine_init(void) smdkv210_dm9000_init(); samsung_keypad_set_platdata(&smdkv210_keypad_data); - s3c24xx_ts_set_platdata(&s3c_ts_platform); + s3c24xx_ts_set_platdata(NULL); s3c_i2c0_set_platdata(NULL); s3c_i2c1_set_platdata(NULL); diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c index 309e388a8a8..f149d278377 100644 --- a/arch/arm/mach-s5pv210/pm.c +++ b/arch/arm/mach-s5pv210/pm.c @@ -88,7 +88,7 @@ static struct sleep_save s5pv210_core_save[] = { SAVE_ITEM(S3C2410_TCNTO(0)), }; -void s5pv210_cpu_suspend(unsigned long arg) +static int s5pv210_cpu_suspend(unsigned long arg) { unsigned long tmp; diff --git a/arch/arm/mach-s5pv210/setup-sdhci.c b/arch/arm/mach-s5pv210/setup-sdhci.c index a83b6c909f6..6b8ccc4d35f 100644 --- a/arch/arm/mach-s5pv210/setup-sdhci.c +++ b/arch/arm/mach-s5pv210/setup-sdhci.c @@ -10,17 +10,7 @@ * published by the Free Software Foundation. */ -#include <linux/kernel.h> #include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <linux/mmc/card.h> -#include <linux/mmc/host.h> - -#include <plat/regs-sdhci.h> -#include <plat/sdhci.h> /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ @@ -30,34 +20,3 @@ char *s5pv210_hsmmc_clksrcs[4] = { [2] = "sclk_mmc", /* mmc_bus */ /* [3] = NULL, - reserved */ }; - -void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card) -{ - u32 ctrl2, ctrl3; - - /* don't need to alter anything according to card-type */ - - writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4); - - ctrl2 = readl(r + S3C_SDHCI_CONTROL2); - ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK; - ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR | - S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK | - S3C_SDHCI_CTRL2_ENFBCLKRX | - S3C_SDHCI_CTRL2_DFCNT_NONE | - S3C_SDHCI_CTRL2_ENCLKOUTHOLD); - - if (ios->clock < 25 * 1000000) - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 | - S3C_SDHCI_CTRL3_FCSEL2 | - S3C_SDHCI_CTRL3_FCSEL1 | - S3C_SDHCI_CTRL3_FCSEL0); - else - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0); - - writel(ctrl2, r + S3C_SDHCI_CONTROL2); - writel(ctrl3, r + S3C_SDHCI_CONTROL3); -} diff --git a/arch/arm/mach-s5pv210/sleep.S b/arch/arm/mach-s5pv210/sleep.S deleted file mode 100644 index e3452ccd4b0..00000000000 --- a/arch/arm/mach-s5pv210/sleep.S +++ /dev/null @@ -1,52 +0,0 @@ -/* linux/arch/arm/plat-s5p/sleep.S - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5PV210 power Manager (Suspend-To-RAM) support - * Based on S3C2410 sleep code by: - * Ben Dooks, (c) 2004 Simtec Electronics - * - * Based on PXA/SA1100 sleep code by: - * Nicolas Pitre, (c) 2002 Monta Vista Software Inc - * Cliff Brake, (c) 2001 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/linkage.h> -#include <asm/assembler.h> -#include <asm/memory.h> - - .text - - /* sleep magic, to allow the bootloader to check for an valid - * image to resume to. Must be the first word before the - * s3c_cpu_resume entry. - */ - - .word 0x2bedf00d - - /* s3c_cpu_resume - * - * resume code entry for bootloader to call - * - * we must put this code here in the data segment as we have no - * other way of restoring the stack pointer after sleep, and we - * must not write to the code segment (code is read-only) - */ - -ENTRY(s3c_cpu_resume) - b cpu_resume diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index 167a67c5ca5..5fde49da399 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -342,6 +342,7 @@ static struct platform_device mipidsi0_device = { static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, .tmio_caps = MMC_CAP_SD_HIGHSPEED, .tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29, }; @@ -383,7 +384,7 @@ void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state) } static struct sh_mobile_sdhi_info sh_sdhi1_info = { - .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE, + .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT, .tmio_caps = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ, .tmio_ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .set_pwr = ag5evm_sdhi1_set_pwr, diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index ec8f9d960e2..b622d8d3ab7 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -1415,6 +1415,7 @@ static void __init ap4evb_init(void) fsi_init_pm_clock(); sh7372_pm_init(); pm_clk_add(&fsi_device.dev, "spu2"); + pm_clk_add(&lcdc1_device.dev, "hdmi"); } static void __init ap4evb_timer_init(void) diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 671925dcf5f..de2253d7f15 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -642,6 +642,8 @@ static struct usbhs_private usbhs0_private = { }, .driver_param = { .buswait_bwait = 4, + .d0_tx_id = SHDMA_SLAVE_USB0_TX, + .d1_rx_id = SHDMA_SLAVE_USB0_RX, }, }, }; @@ -811,6 +813,8 @@ static struct usbhs_private usbhs1_private = { .buswait_bwait = 4, .pipe_type = usbhs1_pipe_cfg, .pipe_size = ARRAY_SIZE(usbhs1_pipe_cfg), + .d0_tx_id = SHDMA_SLAVE_USB1_TX, + .d1_rx_id = SHDMA_SLAVE_USB1_RX, }, }, }; @@ -1591,6 +1595,7 @@ static void __init mackerel_init(void) hdmi_init_pm_clock(); sh7372_pm_init(); pm_clk_add(&fsi_device.dev, "spu2"); + pm_clk_add(&hdmi_lcdc_device.dev, "hdmi"); } static void __init mackerel_timer_init(void) diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index 6b1619a65db..66975921e64 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -503,16 +503,17 @@ static struct clk *late_main_clks[] = { &sh7372_fsidivb_clk, }; -enum { MSTP001, +enum { MSTP001, MSTP000, MSTP131, MSTP130, MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP117, MSTP116, MSTP113, MSTP106, MSTP101, MSTP100, MSTP223, - MSTP218, MSTP217, MSTP216, - MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, - MSTP329, MSTP328, MSTP323, MSTP322, MSTP314, MSTP313, MSTP312, - MSTP423, MSTP415, MSTP413, MSTP411, MSTP410, MSTP406, MSTP403, + MSTP218, MSTP217, MSTP216, MSTP214, MSTP208, MSTP207, + MSTP206, MSTP205, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, + MSTP328, MSTP323, MSTP322, MSTP314, MSTP313, MSTP312, + MSTP423, MSTP415, MSTP413, MSTP411, MSTP410, MSTP407, MSTP406, + MSTP405, MSTP404, MSTP403, MSTP400, MSTP_NR }; #define MSTP(_parent, _reg, _bit, _flags) \ @@ -520,6 +521,7 @@ enum { MSTP001, static struct clk mstp_clks[MSTP_NR] = { [MSTP001] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 1, 0), /* IIC2 */ + [MSTP000] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 0, 0), /* MSIOF0 */ [MSTP131] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 31, 0), /* VEU3 */ [MSTP130] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 30, 0), /* VEU2 */ [MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* VEU1 */ @@ -538,14 +540,16 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* DMAC1 */ [MSTP217] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 17, 0), /* DMAC2 */ [MSTP216] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 16, 0), /* DMAC3 */ + [MSTP214] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 14, 0), /* USBDMAC */ + [MSTP208] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 8, 0), /* MSIOF1 */ [MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */ [MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */ + [MSTP205] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 5, 0), /* MSIOF2 */ [MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */ [MSTP203] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 3, 0), /* SCIFA1 */ [MSTP202] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 2, 0), /* SCIFA2 */ [MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */ [MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */ - [MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */ [MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, 0), /* FSI2 */ [MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */ [MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */ @@ -557,8 +561,12 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP413] = MSTP(&pllc1_div2_clk, SMSTPCR4, 13, 0), /* HDMI */ [MSTP411] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 11, 0), /* IIC3 */ [MSTP410] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 10, 0), /* IIC4 */ + [MSTP407] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 7, 0), /* USB-DMAC1 */ [MSTP406] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 6, 0), /* USB1 */ + [MSTP405] = MSTP(&r_clk, SMSTPCR4, 5, 0), /* CMT4 */ + [MSTP404] = MSTP(&r_clk, SMSTPCR4, 4, 0), /* CMT3 */ [MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */ + [MSTP400] = MSTP(&r_clk, SMSTPCR4, 0, 0), /* CMT2 */ }; static struct clk_lookup lookups[] = { @@ -609,6 +617,7 @@ static struct clk_lookup lookups[] = { /* MSTP32 clocks */ CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* IIC2 */ + CLKDEV_DEV_ID("spi_sh_msiof.0", &mstp_clks[MSTP000]), /* MSIOF0 */ CLKDEV_DEV_ID("uio_pdrv_genirq.4", &mstp_clks[MSTP131]), /* VEU3 */ CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[MSTP130]), /* VEU2 */ CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[MSTP129]), /* VEU1 */ @@ -629,14 +638,16 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* DMAC1 */ CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP217]), /* DMAC2 */ CLKDEV_DEV_ID("sh-dma-engine.2", &mstp_clks[MSTP216]), /* DMAC3 */ + CLKDEV_DEV_ID("sh-dma-engine.3", &mstp_clks[MSTP214]), /* USB-DMAC0 */ + CLKDEV_DEV_ID("spi_sh_msiof.1", &mstp_clks[MSTP208]), /* MSIOF1 */ CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */ CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP206]), /* SCIFB */ + CLKDEV_DEV_ID("spi_sh_msiof.2", &mstp_clks[MSTP205]), /* MSIOF2 */ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */ CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */ CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */ CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */ CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */ - CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */ CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */ CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */ CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USB0 */ @@ -650,11 +661,17 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-mobile-hdmi", &mstp_clks[MSTP413]), /* HDMI */ CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* IIC3 */ CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* IIC4 */ + CLKDEV_DEV_ID("sh-dma-engine.4", &mstp_clks[MSTP407]), /* USB-DMAC1 */ CLKDEV_DEV_ID("r8a66597_hcd.1", &mstp_clks[MSTP406]), /* USB1 */ CLKDEV_DEV_ID("r8a66597_udc.1", &mstp_clks[MSTP406]), /* USB1 */ CLKDEV_DEV_ID("renesas_usbhs.1", &mstp_clks[MSTP406]), /* USB1 */ + CLKDEV_DEV_ID("sh_cmt.4", &mstp_clks[MSTP405]), /* CMT4 */ + CLKDEV_DEV_ID("sh_cmt.3", &mstp_clks[MSTP404]), /* CMT3 */ CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */ + CLKDEV_DEV_ID("sh_cmt.2", &mstp_clks[MSTP400]), /* CMT2 */ + CLKDEV_ICK_ID("hdmi", "sh_mobile_lcdc_fb.1", + &div6_reparent_clks[DIV6_HDMI]), CLKDEV_ICK_ID("ick", "sh-mobile-hdmi", &div6_reparent_clks[DIV6_HDMI]), CLKDEV_ICK_ID("icka", "sh_fsi2", &div6_reparent_clks[DIV6_FSIA]), CLKDEV_ICK_ID("ickb", "sh_fsi2", &div6_reparent_clks[DIV6_FSIB]), diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 6db2ccabc2b..61a846bb30f 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -365,7 +365,7 @@ void __init sh73a0_clock_init(void) __raw_writel(0x108, SD2CKCR); /* detect main clock parent */ - switch ((__raw_readl(CKSCR) >> 24) & 0x03) { + switch ((__raw_readl(CKSCR) >> 28) & 0x03) { case 0: main_clk.parent = &sh73a0_extal1_clk; break; diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h index ce595cee86c..24e63a85e66 100644 --- a/arch/arm/mach-shmobile/include/mach/sh7372.h +++ b/arch/arm/mach-shmobile/include/mach/sh7372.h @@ -459,6 +459,10 @@ enum { SHDMA_SLAVE_SDHI2_TX, SHDMA_SLAVE_MMCIF_RX, SHDMA_SLAVE_MMCIF_TX, + SHDMA_SLAVE_USB0_TX, + SHDMA_SLAVE_USB0_RX, + SHDMA_SLAVE_USB1_TX, + SHDMA_SLAVE_USB1_RX, }; extern struct clk sh7372_extal1_clk; diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c index 3b28743c77e..739315e30eb 100644 --- a/arch/arm/mach-shmobile/intc-sh7372.c +++ b/arch/arm/mach-shmobile/intc-sh7372.c @@ -379,7 +379,7 @@ enum { /* BBIF2 */ VPU, TSIF1, - _3DG_SGX530, + /* 3DG */ _2DDMAC, IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2, IPMMU_IPMMUR, IPMMU_IPMMUR2, @@ -436,7 +436,7 @@ static struct intc_vect intcs_vectors[] = { /* BBIF2 */ INTCS_VECT(VPU, 0x980), INTCS_VECT(TSIF1, 0x9a0), - INTCS_VECT(_3DG_SGX530, 0x9e0), + /* 3DG */ INTCS_VECT(_2DDMAC, 0xa00), INTCS_VECT(IIC2_ALI2, 0xa80), INTCS_VECT(IIC2_TACKI2, 0xaa0), INTCS_VECT(IIC2_WAITI2, 0xac0), INTCS_VECT(IIC2_DTEI2, 0xae0), @@ -521,7 +521,7 @@ static struct intc_mask_reg intcs_mask_registers[] = { RTDMAC_1_DEI3, RTDMAC_1_DEI2, RTDMAC_1_DEI1, RTDMAC_1_DEI0 } }, { 0xffd20198, 0xffd201d8, 8, /* IMR6SA / IMCR6SA */ { 0, 0, MSIOF, 0, - _3DG_SGX530, 0, 0, 0 } }, + 0, 0, 0, 0 } }, { 0xffd2019c, 0xffd201dc, 8, /* IMR7SA / IMCR7SA */ { 0, TMU_TUNI2, TMU_TUNI1, TMU_TUNI0, 0, 0, 0, 0 } }, @@ -561,7 +561,6 @@ static struct intc_prio_reg intcs_prio_registers[] = { TMU_TUNI2, TSIF1 } }, { 0xffd2001c, 0, 16, 4, /* IPRHS */ { 0, 0, VEU, BEU } }, { 0xffd20020, 0, 16, 4, /* IPRIS */ { 0, MSIOF, TSIF0, IIC0 } }, - { 0xffd20024, 0, 16, 4, /* IPRJS */ { 0, _3DG_SGX530, 0, 0 } }, { 0xffd20028, 0, 16, 4, /* IPRKS */ { 0, 0, LMB, 0 } }, { 0xffd2002c, 0, 16, 4, /* IPRLS */ { IPMMU, 0, 0, 0 } }, { 0xffd20030, 0, 16, 4, /* IPRMS */ { IIC2, 0, 0, 0 } }, diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index 79f0413d872..2d9b1b1a253 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -169,35 +169,35 @@ static struct platform_device scif6_device = { }; /* CMT */ -static struct sh_timer_config cmt10_platform_data = { - .name = "CMT10", - .channel_offset = 0x10, - .timer_bit = 0, +static struct sh_timer_config cmt2_platform_data = { + .name = "CMT2", + .channel_offset = 0x40, + .timer_bit = 5, .clockevent_rating = 125, .clocksource_rating = 125, }; -static struct resource cmt10_resources[] = { +static struct resource cmt2_resources[] = { [0] = { - .name = "CMT10", - .start = 0xe6138010, - .end = 0xe613801b, + .name = "CMT2", + .start = 0xe6130040, + .end = 0xe613004b, .flags = IORESOURCE_MEM, }, [1] = { - .start = evt2irq(0x0b00), /* CMT1_CMT10 */ + .start = evt2irq(0x0b80), /* CMT2 */ .flags = IORESOURCE_IRQ, }, }; -static struct platform_device cmt10_device = { +static struct platform_device cmt2_device = { .name = "sh_cmt", - .id = 10, + .id = 2, .dev = { - .platform_data = &cmt10_platform_data, + .platform_data = &cmt2_platform_data, }, - .resource = cmt10_resources, - .num_resources = ARRAY_SIZE(cmt10_resources), + .resource = cmt2_resources, + .num_resources = ARRAY_SIZE(cmt2_resources), }; /* TMU */ @@ -602,6 +602,150 @@ static struct platform_device dma2_device = { }, }; +/* + * USB-DMAC + */ + +unsigned int usbts_shift[] = {3, 4, 5}; + +enum { + XMIT_SZ_8BYTE = 0, + XMIT_SZ_16BYTE = 1, + XMIT_SZ_32BYTE = 2, +}; + +#define USBTS_INDEX2VAL(i) (((i) & 3) << 6) + +static const struct sh_dmae_channel sh7372_usb_dmae_channels[] = { + { + .offset = 0, + }, { + .offset = 0x20, + }, +}; + +/* USB DMAC0 */ +static const struct sh_dmae_slave_config sh7372_usb_dmae0_slaves[] = { + { + .slave_id = SHDMA_SLAVE_USB0_TX, + .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + }, { + .slave_id = SHDMA_SLAVE_USB0_RX, + .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + }, +}; + +static struct sh_dmae_pdata usb_dma0_platform_data = { + .slave = sh7372_usb_dmae0_slaves, + .slave_num = ARRAY_SIZE(sh7372_usb_dmae0_slaves), + .channel = sh7372_usb_dmae_channels, + .channel_num = ARRAY_SIZE(sh7372_usb_dmae_channels), + .ts_low_shift = 6, + .ts_low_mask = 0xc0, + .ts_high_shift = 0, + .ts_high_mask = 0, + .ts_shift = usbts_shift, + .ts_shift_num = ARRAY_SIZE(usbts_shift), + .dmaor_init = DMAOR_DME, + .chcr_offset = 0x14, + .chcr_ie_bit = 1 << 5, + .dmaor_is_32bit = 1, + .needs_tend_set = 1, + .no_dmars = 1, +}; + +static struct resource sh7372_usb_dmae0_resources[] = { + { + /* Channel registers and DMAOR */ + .start = 0xe68a0020, + .end = 0xe68a0064 - 1, + .flags = IORESOURCE_MEM, + }, + { + /* VCR/SWR/DMICR */ + .start = 0xe68a0000, + .end = 0xe68a0014 - 1, + .flags = IORESOURCE_MEM, + }, + { + /* IRQ for channels */ + .start = evt2irq(0x0a00), + .end = evt2irq(0x0a00), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usb_dma0_device = { + .name = "sh-dma-engine", + .id = 3, + .resource = sh7372_usb_dmae0_resources, + .num_resources = ARRAY_SIZE(sh7372_usb_dmae0_resources), + .dev = { + .platform_data = &usb_dma0_platform_data, + }, +}; + +/* USB DMAC1 */ +static const struct sh_dmae_slave_config sh7372_usb_dmae1_slaves[] = { + { + .slave_id = SHDMA_SLAVE_USB1_TX, + .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + }, { + .slave_id = SHDMA_SLAVE_USB1_RX, + .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + }, +}; + +static struct sh_dmae_pdata usb_dma1_platform_data = { + .slave = sh7372_usb_dmae1_slaves, + .slave_num = ARRAY_SIZE(sh7372_usb_dmae1_slaves), + .channel = sh7372_usb_dmae_channels, + .channel_num = ARRAY_SIZE(sh7372_usb_dmae_channels), + .ts_low_shift = 6, + .ts_low_mask = 0xc0, + .ts_high_shift = 0, + .ts_high_mask = 0, + .ts_shift = usbts_shift, + .ts_shift_num = ARRAY_SIZE(usbts_shift), + .dmaor_init = DMAOR_DME, + .chcr_offset = 0x14, + .chcr_ie_bit = 1 << 5, + .dmaor_is_32bit = 1, + .needs_tend_set = 1, + .no_dmars = 1, +}; + +static struct resource sh7372_usb_dmae1_resources[] = { + { + /* Channel registers and DMAOR */ + .start = 0xe68c0020, + .end = 0xe68c0064 - 1, + .flags = IORESOURCE_MEM, + }, + { + /* VCR/SWR/DMICR */ + .start = 0xe68c0000, + .end = 0xe68c0014 - 1, + .flags = IORESOURCE_MEM, + }, + { + /* IRQ for channels */ + .start = evt2irq(0x1d00), + .end = evt2irq(0x1d00), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usb_dma1_device = { + .name = "sh-dma-engine", + .id = 4, + .resource = sh7372_usb_dmae1_resources, + .num_resources = ARRAY_SIZE(sh7372_usb_dmae1_resources), + .dev = { + .platform_data = &usb_dma1_platform_data, + }, +}; + /* VPU */ static struct uio_info vpu_platform_data = { .name = "VPU5HG", @@ -818,7 +962,7 @@ static struct platform_device *sh7372_early_devices[] __initdata = { &scif4_device, &scif5_device, &scif6_device, - &cmt10_device, + &cmt2_device, &tmu00_device, &tmu01_device, }; @@ -829,6 +973,8 @@ static struct platform_device *sh7372_late_devices[] __initdata = { &dma0_device, &dma1_device, &dma2_device, + &usb_dma0_device, + &usb_dma1_device, &vpu_device, &veu0_device, &veu1_device, diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index de72058180a..1fafc324460 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -318,6 +318,10 @@ static struct clk v2m_sp804_clk = { .rate = 1000000, }; +static struct clk v2m_ref_clk = { + .rate = 32768, +}; + static struct clk dummy_apb_pclk; static struct clk_lookup v2m_lookups[] = { @@ -348,6 +352,9 @@ static struct clk_lookup v2m_lookups[] = { }, { /* CLCD */ .dev_id = "mb:clcd", .clk = &osc1_clk, + }, { /* SP805 WDT */ + .dev_id = "mb:wdt", + .clk = &v2m_ref_clk, }, { /* SP804 timers */ .dev_id = "sp804", .con_id = "v2m-timer0", diff --git a/arch/arm/mm/abort-macro.S b/arch/arm/mm/abort-macro.S index 52162d59407..2cbf68ef0e8 100644 --- a/arch/arm/mm/abort-macro.S +++ b/arch/arm/mm/abort-macro.S @@ -17,7 +17,7 @@ cmp \tmp, # 0x5600 @ Is it ldrsb? orreq \tmp, \tmp, #1 << 11 @ Set L-bit if yes tst \tmp, #1 << 11 @ L = 0 -> write - orreq \psr, \psr, #1 << 11 @ yes. + orreq \fsr, \fsr, #1 << 11 @ yes. b do_DataAbort not_thumb: .endm diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 44c086710d2..9ecfdb51195 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -277,6 +277,25 @@ static void l2x0_disable(void) spin_unlock_irqrestore(&l2x0_lock, flags); } +static void __init l2x0_unlock(__u32 cache_id) +{ + int lockregs; + int i; + + if (cache_id == L2X0_CACHE_ID_PART_L310) + lockregs = 8; + else + /* L210 and unknown types */ + lockregs = 1; + + for (i = 0; i < lockregs; i++) { + writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE + + i * L2X0_LOCKDOWN_STRIDE); + writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE + + i * L2X0_LOCKDOWN_STRIDE); + } +} + void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) { __u32 aux; @@ -328,6 +347,8 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) * accessing the below registers will fault. */ if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) { + /* Make sure that I&D is not locked down when starting */ + l2x0_unlock(cache_id); /* l2x0 controller is disabled */ writel_relaxed(aux, l2x0_base + L2X0_AUX_CTRL); diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 3b24bfa3b82..07c4bc8ea0a 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -174,6 +174,10 @@ ENTRY(v7_coherent_user_range) dcache_line_size r2, r3 sub r3, r2, #1 bic r12, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: USER( mcr p15, 0, r12, c7, c11, 1 ) @ clean D line to the point of unification add r12, r12, r2 @@ -223,6 +227,10 @@ ENTRY(v7_flush_kern_dcache_area) add r1, r0, r1 sub r3, r2, #1 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line / unified line add r0, r0, r2 @@ -247,6 +255,10 @@ v7_dma_inv_range: sub r3, r2, #1 tst r0, r3 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif mcrne p15, 0, r0, c7, c14, 1 @ clean & invalidate D / U line tst r1, r3 @@ -270,6 +282,10 @@ v7_dma_clean_range: dcache_line_size r2, r3 sub r3, r2, #1 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: mcr p15, 0, r0, c7, c10, 1 @ clean D / U line add r0, r0, r2 @@ -288,6 +304,10 @@ ENTRY(v7_dma_flush_range) dcache_line_size r2, r3 sub r3, r2, #1 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D / U line add r0, r0, r2 diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 50be842e89f..01f5987eb1a 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -347,6 +347,8 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, if (addr) *handle = pfn_to_dma(dev, page_to_pfn(page)); + else + __dma_free_buffer(page, size); return addr; } diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 64ab41348f3..34409a08ba0 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -298,7 +298,7 @@ static void __init arm_bootmem_free(unsigned long min, unsigned long max_low, #ifdef CONFIG_HAVE_ARCH_PFN_VALID int pfn_valid(unsigned long pfn) { - return memblock_is_memory(pfn << PAGE_SHIFT); + return memblock_is_memory(__pfn_to_phys(pfn)); } EXPORT_SYMBOL(pfn_valid); #endif diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 92bd102e398..2e6849b41f6 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -379,7 +379,7 @@ ENTRY(cpu_arm920_set_pte_ext) /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */ .globl cpu_arm920_suspend_size -.equ cpu_arm920_suspend_size, 4 * 3 +.equ cpu_arm920_suspend_size, 4 * 4 #ifdef CONFIG_PM_SLEEP ENTRY(cpu_arm920_do_suspend) stmfd sp!, {r4 - r7, lr} diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 2bbcf053dff..cd8f79c3a28 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -394,7 +394,7 @@ ENTRY(cpu_arm926_set_pte_ext) /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */ .globl cpu_arm926_suspend_size -.equ cpu_arm926_suspend_size, 4 * 3 +.equ cpu_arm926_suspend_size, 4 * 4 #ifdef CONFIG_PM_SLEEP ENTRY(cpu_arm926_do_suspend) stmfd sp!, {r4 - r7, lr} diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index 07219c2ae11..69e7f2ef738 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -182,11 +182,11 @@ ENDPROC(cpu_sa1100_do_suspend) ENTRY(cpu_sa1100_do_resume) ldmia r0, {r4 - r7} @ load cp regs - mov r1, #0 - mcr p15, 0, r1, c8, c7, 0 @ flush I+D TLBs - mcr p15, 0, r1, c7, c7, 0 @ flush I&D cache - mcr p15, 0, r1, c9, c0, 0 @ invalidate RB - mcr p15, 0, r1, c9, c0, 5 @ allow user space to use RB + mov ip, #0 + mcr p15, 0, ip, c8, c7, 0 @ flush I+D TLBs + mcr p15, 0, ip, c7, c7, 0 @ flush I&D cache + mcr p15, 0, ip, c9, c0, 0 @ invalidate RB + mcr p15, 0, ip, c9, c0, 5 @ allow user space to use RB mcr p15, 0, r4, c3, c0, 0 @ domain ID mcr p15, 0, r5, c2, c0, 0 @ translation table base addr diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 219138d2f15..a923aa0fd00 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -223,6 +223,22 @@ __v6_setup: mrc p15, 0, r0, c1, c0, 0 @ read control register bic r0, r0, r5 @ clear bits them orr r0, r0, r6 @ set them +#ifdef CONFIG_ARM_ERRATA_364296 + /* + * Workaround for the 364296 ARM1136 r0p2 erratum (possible cache data + * corruption with hit-under-miss enabled). The conditional code below + * (setting the undocumented bit 31 in the auxiliary control register + * and the FI bit in the control register) disables hit-under-miss + * without putting the processor into full low interrupt latency mode. + */ + ldr r6, =0x4107b362 @ id for ARM1136 r0p2 + mrc p15, 0, r5, c0, c0, 0 @ get processor id + teq r5, r6 @ check for the faulty core + mrceq p15, 0, r5, c1, c0, 1 @ load aux control reg + orreq r5, r5, #(1 << 31) @ set the undocumented bit 31 + mcreq p15, 0, r5, c1, c0, 1 @ write aux control reg + orreq r0, r0, #(1 << 21) @ low interrupt latency configuration +#endif mov pc, lr @ return to head.S:__ret /* diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index a30e78542cc..9049c0764db 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -66,6 +66,7 @@ ENDPROC(cpu_v7_proc_fin) ENTRY(cpu_v7_reset) mrc p15, 0, r1, c1, c0, 0 @ ctrl register bic r1, r1, #0x1 @ ...............m + THUMB( bic r1, r1, #1 << 30 ) @ SCTLR.TE (Thumb exceptions) mcr p15, 0, r1, c1, c0, 0 @ disable MMU isb mov pc, r0 @@ -247,13 +248,16 @@ ENTRY(cpu_v7_do_resume) mcr p15, 0, r7, c2, c0, 0 @ TTB 0 mcr p15, 0, r8, c2, c0, 1 @ TTB 1 mcr p15, 0, ip, c2, c0, 2 @ TTB control register - mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register + mrc p15, 0, r4, c1, c0, 1 @ Read Auxiliary control register + teq r4, r10 @ Is it already set? + mcrne p15, 0, r10, c1, c0, 1 @ No, so write it mcr p15, 0, r11, c1, c0, 2 @ Co-processor access control ldr r4, =PRRR @ PRRR ldr r5, =NMRR @ NMRR mcr p15, 0, r4, c10, c2, 0 @ write PRRR mcr p15, 0, r5, c10, c2, 1 @ write NMRR isb + dsb mov r0, r9 @ control register mov r2, r7, lsr #14 @ get TTB0 base mov r2, r2, lsl #14 diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index 28c72a2006a..755e1bf2268 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -406,7 +406,7 @@ ENTRY(cpu_xsc3_set_pte_ext) .align .globl cpu_xsc3_suspend_size -.equ cpu_xsc3_suspend_size, 4 * 8 +.equ cpu_xsc3_suspend_size, 4 * 7 #ifdef CONFIG_PM_SLEEP ENTRY(cpu_xsc3_do_suspend) stmfd sp!, {r4 - r10, lr} @@ -418,12 +418,12 @@ ENTRY(cpu_xsc3_do_suspend) mrc p15, 0, r9, c1, c0, 1 @ auxiliary control reg mrc p15, 0, r10, c1, c0, 0 @ control reg bic r4, r4, #2 @ clear frequency change bit - stmia r0, {r1, r4 - r10} @ store v:p offset + cp regs + stmia r0, {r4 - r10} @ store cp regs ldmia sp!, {r4 - r10, pc} ENDPROC(cpu_xsc3_do_suspend) ENTRY(cpu_xsc3_do_resume) - ldmia r0, {r1, r4 - r10} @ load v:p offset + cp regs + ldmia r0, {r4 - r10} @ load cp regs mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB mcr p15, 0, ip, c7, c10, 4 @ drain write (&fill) buffer diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index ea28f98d5d6..bd9a06b3ee8 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -26,54 +26,8 @@ #include <plat/mmc.h> #include <mach/gpio.h> #include <plat/menelaus.h> -#include <plat/mcbsp.h> #include <plat/omap44xx.h> -/*-------------------------------------------------------------------------*/ - -#if defined(CONFIG_OMAP_MCBSP) || defined(CONFIG_OMAP_MCBSP_MODULE) - -static struct platform_device **omap_mcbsp_devices; - -void omap_mcbsp_register_board_cfg(struct resource *res, int res_count, - struct omap_mcbsp_platform_data *config, int size) -{ - int i; - - omap_mcbsp_devices = kzalloc(size * sizeof(struct platform_device *), - GFP_KERNEL); - if (!omap_mcbsp_devices) { - printk(KERN_ERR "Could not register McBSP devices\n"); - return; - } - - for (i = 0; i < size; i++) { - struct platform_device *new_mcbsp; - int ret; - - new_mcbsp = platform_device_alloc("omap-mcbsp", i + 1); - if (!new_mcbsp) - continue; - platform_device_add_resources(new_mcbsp, &res[i * res_count], - res_count); - new_mcbsp->dev.platform_data = &config[i]; - ret = platform_device_add(new_mcbsp); - if (ret) { - platform_device_put(new_mcbsp); - continue; - } - omap_mcbsp_devices[i] = new_mcbsp; - } -} - -#else -void omap_mcbsp_register_board_cfg(struct resource *res, int res_count, - struct omap_mcbsp_platform_data *config, int size) -{ } -#endif - -/*-------------------------------------------------------------------------*/ - #if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \ defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE) diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 75a847dd776..de7896fd9b3 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -3,6 +3,12 @@ * * OMAP Dual-Mode Timers * + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * Tarun Kanti DebBarma <tarun.kanti@ti.com> + * Thara Gopinath <thara@ti.com> + * + * dmtimer adaptation to platform_driver. + * * Copyright (C) 2005 Nokia Corporation * OMAP2 support by Juha Yrjola * API improvements and OMAP2 clock framework support by Timo Teras @@ -29,168 +35,80 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/init.h> -#include <linux/spinlock.h> -#include <linux/errno.h> -#include <linux/list.h> -#include <linux/clk.h> -#include <linux/delay.h> #include <linux/io.h> -#include <linux/module.h> -#include <mach/hardware.h> -#include <plat/dmtimer.h> -#include <mach/irqs.h> - -static int dm_timer_count; - -#ifdef CONFIG_ARCH_OMAP1 -static struct omap_dm_timer omap1_dm_timers[] = { - { .phys_base = 0xfffb1400, .irq = INT_1610_GPTIMER1 }, - { .phys_base = 0xfffb1c00, .irq = INT_1610_GPTIMER2 }, - { .phys_base = 0xfffb2400, .irq = INT_1610_GPTIMER3 }, - { .phys_base = 0xfffb2c00, .irq = INT_1610_GPTIMER4 }, - { .phys_base = 0xfffb3400, .irq = INT_1610_GPTIMER5 }, - { .phys_base = 0xfffb3c00, .irq = INT_1610_GPTIMER6 }, - { .phys_base = 0xfffb7400, .irq = INT_1610_GPTIMER7 }, - { .phys_base = 0xfffbd400, .irq = INT_1610_GPTIMER8 }, -}; - -static const int omap1_dm_timer_count = ARRAY_SIZE(omap1_dm_timers); - -#else -#define omap1_dm_timers NULL -#define omap1_dm_timer_count 0 -#endif /* CONFIG_ARCH_OMAP1 */ - -#ifdef CONFIG_ARCH_OMAP2 -static struct omap_dm_timer omap2_dm_timers[] = { - { .phys_base = 0x48028000, .irq = INT_24XX_GPTIMER1 }, - { .phys_base = 0x4802a000, .irq = INT_24XX_GPTIMER2 }, - { .phys_base = 0x48078000, .irq = INT_24XX_GPTIMER3 }, - { .phys_base = 0x4807a000, .irq = INT_24XX_GPTIMER4 }, - { .phys_base = 0x4807c000, .irq = INT_24XX_GPTIMER5 }, - { .phys_base = 0x4807e000, .irq = INT_24XX_GPTIMER6 }, - { .phys_base = 0x48080000, .irq = INT_24XX_GPTIMER7 }, - { .phys_base = 0x48082000, .irq = INT_24XX_GPTIMER8 }, - { .phys_base = 0x48084000, .irq = INT_24XX_GPTIMER9 }, - { .phys_base = 0x48086000, .irq = INT_24XX_GPTIMER10 }, - { .phys_base = 0x48088000, .irq = INT_24XX_GPTIMER11 }, - { .phys_base = 0x4808a000, .irq = INT_24XX_GPTIMER12 }, -}; - -static const char *omap2_dm_source_names[] __initdata = { - "sys_ck", - "func_32k_ck", - "alt_ck", - NULL -}; - -static struct clk *omap2_dm_source_clocks[3]; -static const int omap2_dm_timer_count = ARRAY_SIZE(omap2_dm_timers); - -#else -#define omap2_dm_timers NULL -#define omap2_dm_timer_count 0 -#define omap2_dm_source_names NULL -#define omap2_dm_source_clocks NULL -#endif /* CONFIG_ARCH_OMAP2 */ - -#ifdef CONFIG_ARCH_OMAP3 -static struct omap_dm_timer omap3_dm_timers[] = { - { .phys_base = 0x48318000, .irq = INT_24XX_GPTIMER1 }, - { .phys_base = 0x49032000, .irq = INT_24XX_GPTIMER2 }, - { .phys_base = 0x49034000, .irq = INT_24XX_GPTIMER3 }, - { .phys_base = 0x49036000, .irq = INT_24XX_GPTIMER4 }, - { .phys_base = 0x49038000, .irq = INT_24XX_GPTIMER5 }, - { .phys_base = 0x4903A000, .irq = INT_24XX_GPTIMER6 }, - { .phys_base = 0x4903C000, .irq = INT_24XX_GPTIMER7 }, - { .phys_base = 0x4903E000, .irq = INT_24XX_GPTIMER8 }, - { .phys_base = 0x49040000, .irq = INT_24XX_GPTIMER9 }, - { .phys_base = 0x48086000, .irq = INT_24XX_GPTIMER10 }, - { .phys_base = 0x48088000, .irq = INT_24XX_GPTIMER11 }, - { .phys_base = 0x48304000, .irq = INT_34XX_GPT12_IRQ }, -}; - -static const char *omap3_dm_source_names[] __initdata = { - "sys_ck", - "omap_32k_fck", - NULL -}; - -static struct clk *omap3_dm_source_clocks[2]; -static const int omap3_dm_timer_count = ARRAY_SIZE(omap3_dm_timers); +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/pm_runtime.h> -#else -#define omap3_dm_timers NULL -#define omap3_dm_timer_count 0 -#define omap3_dm_source_names NULL -#define omap3_dm_source_clocks NULL -#endif /* CONFIG_ARCH_OMAP3 */ - -#ifdef CONFIG_ARCH_OMAP4 -static struct omap_dm_timer omap4_dm_timers[] = { - { .phys_base = 0x4a318000, .irq = OMAP44XX_IRQ_GPT1 }, - { .phys_base = 0x48032000, .irq = OMAP44XX_IRQ_GPT2 }, - { .phys_base = 0x48034000, .irq = OMAP44XX_IRQ_GPT3 }, - { .phys_base = 0x48036000, .irq = OMAP44XX_IRQ_GPT4 }, - { .phys_base = 0x40138000, .irq = OMAP44XX_IRQ_GPT5 }, - { .phys_base = 0x4013a000, .irq = OMAP44XX_IRQ_GPT6 }, - { .phys_base = 0x4013a000, .irq = OMAP44XX_IRQ_GPT7 }, - { .phys_base = 0x4013e000, .irq = OMAP44XX_IRQ_GPT8 }, - { .phys_base = 0x4803e000, .irq = OMAP44XX_IRQ_GPT9 }, - { .phys_base = 0x48086000, .irq = OMAP44XX_IRQ_GPT10 }, - { .phys_base = 0x48088000, .irq = OMAP44XX_IRQ_GPT11 }, - { .phys_base = 0x4a320000, .irq = OMAP44XX_IRQ_GPT12 }, -}; -static const char *omap4_dm_source_names[] __initdata = { - "sys_clkin_ck", - "sys_32k_ck", - NULL -}; -static struct clk *omap4_dm_source_clocks[2]; -static const int omap4_dm_timer_count = ARRAY_SIZE(omap4_dm_timers); - -#else -#define omap4_dm_timers NULL -#define omap4_dm_timer_count 0 -#define omap4_dm_source_names NULL -#define omap4_dm_source_clocks NULL -#endif /* CONFIG_ARCH_OMAP4 */ - -static struct omap_dm_timer *dm_timers; -static const char **dm_source_names; -static struct clk **dm_source_clocks; +#include <plat/dmtimer.h> -static spinlock_t dm_timer_lock; +static LIST_HEAD(omap_timer_list); +static DEFINE_SPINLOCK(dm_timer_lock); -/* - * Reads timer registers in posted and non-posted mode. The posted mode bit - * is encoded in reg. Note that in posted mode write pending bit must be - * checked. Otherwise a read of a non completed write will produce an error. +/** + * omap_dm_timer_read_reg - read timer registers in posted and non-posted mode + * @timer: timer pointer over which read operation to perform + * @reg: lowest byte holds the register offset + * + * The posted mode bit is encoded in reg. Note that in posted mode write + * pending bit must be checked. Otherwise a read of a non completed write + * will produce an error. */ static inline u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, u32 reg) { - return __omap_dm_timer_read(timer->io_base, reg, timer->posted); + WARN_ON((reg & 0xff) < _OMAP_TIMER_WAKEUP_EN_OFFSET); + return __omap_dm_timer_read(timer, reg, timer->posted); } -/* - * Writes timer registers in posted and non-posted mode. The posted mode bit - * is encoded in reg. Note that in posted mode the write pending bit must be - * checked. Otherwise a write on a register which has a pending write will be - * lost. +/** + * omap_dm_timer_write_reg - write timer registers in posted and non-posted mode + * @timer: timer pointer over which write operation is to perform + * @reg: lowest byte holds the register offset + * @value: data to write into the register + * + * The posted mode bit is encoded in reg. Note that in posted mode the write + * pending bit must be checked. Otherwise a write on a register which has a + * pending write will be lost. */ static void omap_dm_timer_write_reg(struct omap_dm_timer *timer, u32 reg, u32 value) { - __omap_dm_timer_write(timer->io_base, reg, value, timer->posted); + WARN_ON((reg & 0xff) < _OMAP_TIMER_WAKEUP_EN_OFFSET); + __omap_dm_timer_write(timer, reg, value, timer->posted); +} + +static void omap_timer_restore_context(struct omap_dm_timer *timer) +{ + omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_OFFSET, + timer->context.tiocp_cfg); + if (timer->revision > 1) + __raw_writel(timer->context.tistat, timer->sys_stat); + + __raw_writel(timer->context.tisr, timer->irq_stat); + omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG, + timer->context.twer); + omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, + timer->context.tcrr); + omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, + timer->context.tldr); + omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, + timer->context.tmar); + omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, + timer->context.tsicr); + __raw_writel(timer->context.tier, timer->irq_ena); + omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, + timer->context.tclr); } static void omap_dm_timer_wait_for_reset(struct omap_dm_timer *timer) { int c; + if (!timer->sys_stat) + return; + c = 0; - while (!(omap_dm_timer_read_reg(timer, OMAP_TIMER_SYS_STAT_REG) & 1)) { + while (!(__raw_readl(timer->sys_stat) & 1)) { c++; if (c > 100000) { printk(KERN_ERR "Timer failed to reset\n"); @@ -201,53 +119,65 @@ static void omap_dm_timer_wait_for_reset(struct omap_dm_timer *timer) static void omap_dm_timer_reset(struct omap_dm_timer *timer) { - int autoidle = 0, wakeup = 0; - - if (!cpu_class_is_omap2() || timer != &dm_timers[0]) { + omap_dm_timer_enable(timer); + if (timer->pdev->id != 1) { omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06); omap_dm_timer_wait_for_reset(timer); } - omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ); - - /* Enable autoidle on OMAP2+ */ - if (cpu_class_is_omap2()) - autoidle = 1; - - /* - * Enable wake-up on OMAP2 CPUs. - */ - if (cpu_class_is_omap2()) - wakeup = 1; - __omap_dm_timer_reset(timer->io_base, autoidle, wakeup); + __omap_dm_timer_reset(timer, 0, 0); + omap_dm_timer_disable(timer); timer->posted = 1; } -void omap_dm_timer_prepare(struct omap_dm_timer *timer) +int omap_dm_timer_prepare(struct omap_dm_timer *timer) { - omap_dm_timer_enable(timer); - omap_dm_timer_reset(timer); + struct dmtimer_platform_data *pdata = timer->pdev->dev.platform_data; + int ret; + + timer->fclk = clk_get(&timer->pdev->dev, "fck"); + if (WARN_ON_ONCE(IS_ERR_OR_NULL(timer->fclk))) { + timer->fclk = NULL; + dev_err(&timer->pdev->dev, ": No fclk handle.\n"); + return -EINVAL; + } + + if (pdata->needs_manual_reset) + omap_dm_timer_reset(timer); + + ret = omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ); + + timer->posted = 1; + return ret; } struct omap_dm_timer *omap_dm_timer_request(void) { - struct omap_dm_timer *timer = NULL; + struct omap_dm_timer *timer = NULL, *t; unsigned long flags; - int i; + int ret = 0; spin_lock_irqsave(&dm_timer_lock, flags); - for (i = 0; i < dm_timer_count; i++) { - if (dm_timers[i].reserved) + list_for_each_entry(t, &omap_timer_list, node) { + if (t->reserved) continue; - timer = &dm_timers[i]; + timer = t; timer->reserved = 1; break; } + + if (timer) { + ret = omap_dm_timer_prepare(timer); + if (ret) { + timer->reserved = 0; + timer = NULL; + } + } spin_unlock_irqrestore(&dm_timer_lock, flags); - if (timer != NULL) - omap_dm_timer_prepare(timer); + if (!timer) + pr_debug("%s: timer request failed!\n", __func__); return timer; } @@ -255,74 +185,65 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_request); struct omap_dm_timer *omap_dm_timer_request_specific(int id) { - struct omap_dm_timer *timer; + struct omap_dm_timer *timer = NULL, *t; unsigned long flags; + int ret = 0; spin_lock_irqsave(&dm_timer_lock, flags); - if (id <= 0 || id > dm_timer_count || dm_timers[id-1].reserved) { - spin_unlock_irqrestore(&dm_timer_lock, flags); - printk("BUG: warning at %s:%d/%s(): unable to get timer %d\n", - __FILE__, __LINE__, __func__, id); - dump_stack(); - return NULL; + list_for_each_entry(t, &omap_timer_list, node) { + if (t->pdev->id == id && !t->reserved) { + timer = t; + timer->reserved = 1; + break; + } } - timer = &dm_timers[id-1]; - timer->reserved = 1; + if (timer) { + ret = omap_dm_timer_prepare(timer); + if (ret) { + timer->reserved = 0; + timer = NULL; + } + } spin_unlock_irqrestore(&dm_timer_lock, flags); - omap_dm_timer_prepare(timer); + if (!timer) + pr_debug("%s: timer%d request failed!\n", __func__, id); return timer; } EXPORT_SYMBOL_GPL(omap_dm_timer_request_specific); -void omap_dm_timer_free(struct omap_dm_timer *timer) +int omap_dm_timer_free(struct omap_dm_timer *timer) { - omap_dm_timer_enable(timer); - omap_dm_timer_reset(timer); - omap_dm_timer_disable(timer); + if (unlikely(!timer)) + return -EINVAL; + + clk_put(timer->fclk); WARN_ON(!timer->reserved); timer->reserved = 0; + return 0; } EXPORT_SYMBOL_GPL(omap_dm_timer_free); void omap_dm_timer_enable(struct omap_dm_timer *timer) { - if (timer->enabled) - return; - -#ifdef CONFIG_ARCH_OMAP2PLUS - if (cpu_class_is_omap2()) { - clk_enable(timer->fclk); - clk_enable(timer->iclk); - } -#endif - - timer->enabled = 1; + pm_runtime_get_sync(&timer->pdev->dev); } EXPORT_SYMBOL_GPL(omap_dm_timer_enable); void omap_dm_timer_disable(struct omap_dm_timer *timer) { - if (!timer->enabled) - return; - -#ifdef CONFIG_ARCH_OMAP2PLUS - if (cpu_class_is_omap2()) { - clk_disable(timer->iclk); - clk_disable(timer->fclk); - } -#endif - - timer->enabled = 0; + pm_runtime_put(&timer->pdev->dev); } EXPORT_SYMBOL_GPL(omap_dm_timer_disable); int omap_dm_timer_get_irq(struct omap_dm_timer *timer) { - return timer->irq; + if (timer) + return timer->irq; + return -EINVAL; } EXPORT_SYMBOL_GPL(omap_dm_timer_get_irq); @@ -334,24 +255,29 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_get_irq); */ __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask) { - int i; + int i = 0; + struct omap_dm_timer *timer = NULL; + unsigned long flags; /* If ARMXOR cannot be idled this function call is unnecessary */ if (!(inputmask & (1 << 1))) return inputmask; /* If any active timer is using ARMXOR return modified mask */ - for (i = 0; i < dm_timer_count; i++) { + spin_lock_irqsave(&dm_timer_lock, flags); + list_for_each_entry(timer, &omap_timer_list, node) { u32 l; - l = omap_dm_timer_read_reg(&dm_timers[i], OMAP_TIMER_CTRL_REG); + l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); if (l & OMAP_TIMER_CTRL_ST) { if (((omap_readl(MOD_CONF_CTRL_1) >> (i * 2)) & 0x03) == 0) inputmask &= ~(1 << 1); else inputmask &= ~(1 << 2); } + i++; } + spin_unlock_irqrestore(&dm_timer_lock, flags); return inputmask; } @@ -361,7 +287,9 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask); struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer) { - return timer->fclk; + if (timer) + return timer->fclk; + return NULL; } EXPORT_SYMBOL_GPL(omap_dm_timer_get_fclk); @@ -375,70 +303,91 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask); #endif -void omap_dm_timer_trigger(struct omap_dm_timer *timer) +int omap_dm_timer_trigger(struct omap_dm_timer *timer) { + if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) { + pr_err("%s: timer not available or enabled.\n", __func__); + return -EINVAL; + } + omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0); + return 0; } EXPORT_SYMBOL_GPL(omap_dm_timer_trigger); -void omap_dm_timer_start(struct omap_dm_timer *timer) +int omap_dm_timer_start(struct omap_dm_timer *timer) { u32 l; + if (unlikely(!timer)) + return -EINVAL; + + omap_dm_timer_enable(timer); + + if (timer->loses_context) { + u32 ctx_loss_cnt_after = + timer->get_context_loss_count(&timer->pdev->dev); + if (ctx_loss_cnt_after != timer->ctx_loss_count) + omap_timer_restore_context(timer); + } + l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); if (!(l & OMAP_TIMER_CTRL_ST)) { l |= OMAP_TIMER_CTRL_ST; omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); } + + /* Save the context */ + timer->context.tclr = l; + return 0; } EXPORT_SYMBOL_GPL(omap_dm_timer_start); -void omap_dm_timer_stop(struct omap_dm_timer *timer) +int omap_dm_timer_stop(struct omap_dm_timer *timer) { unsigned long rate = 0; + struct dmtimer_platform_data *pdata = timer->pdev->dev.platform_data; -#ifdef CONFIG_ARCH_OMAP2PLUS - rate = clk_get_rate(timer->fclk); -#endif + if (unlikely(!timer)) + return -EINVAL; - __omap_dm_timer_stop(timer->io_base, timer->posted, rate); + if (!pdata->needs_manual_reset) + rate = clk_get_rate(timer->fclk); + + __omap_dm_timer_stop(timer, timer->posted, rate); + + return 0; } EXPORT_SYMBOL_GPL(omap_dm_timer_stop); -#ifdef CONFIG_ARCH_OMAP1 - int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) { - int n = (timer - dm_timers) << 1; - u32 l; - - l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n); - l |= source << n; - omap_writel(l, MOD_CONF_CTRL_1); + int ret; + struct dmtimer_platform_data *pdata; - return 0; -} -EXPORT_SYMBOL_GPL(omap_dm_timer_set_source); + if (unlikely(!timer)) + return -EINVAL; -#else + pdata = timer->pdev->dev.platform_data; -int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) -{ if (source < 0 || source >= 3) return -EINVAL; - return __omap_dm_timer_set_source(timer->fclk, - dm_source_clocks[source]); + ret = pdata->set_timer_src(timer->pdev, source); + + return ret; } EXPORT_SYMBOL_GPL(omap_dm_timer_set_source); -#endif - -void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, +int omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int load) { u32 l; + if (unlikely(!timer)) + return -EINVAL; + + omap_dm_timer_enable(timer); l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); if (autoreload) l |= OMAP_TIMER_CTRL_AR; @@ -448,15 +397,32 @@ void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load); omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0); + /* Save the context */ + timer->context.tclr = l; + timer->context.tldr = load; + omap_dm_timer_disable(timer); + return 0; } EXPORT_SYMBOL_GPL(omap_dm_timer_set_load); /* Optimized set_load which removes costly spin wait in timer_start */ -void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, +int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int load) { u32 l; + if (unlikely(!timer)) + return -EINVAL; + + omap_dm_timer_enable(timer); + + if (timer->loses_context) { + u32 ctx_loss_cnt_after = + timer->get_context_loss_count(&timer->pdev->dev); + if (ctx_loss_cnt_after != timer->ctx_loss_count) + omap_timer_restore_context(timer); + } + l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); if (autoreload) { l |= OMAP_TIMER_CTRL_AR; @@ -466,15 +432,25 @@ void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, } l |= OMAP_TIMER_CTRL_ST; - __omap_dm_timer_load_start(timer->io_base, l, load, timer->posted); + __omap_dm_timer_load_start(timer, l, load, timer->posted); + + /* Save the context */ + timer->context.tclr = l; + timer->context.tldr = load; + timer->context.tcrr = load; + return 0; } EXPORT_SYMBOL_GPL(omap_dm_timer_set_load_start); -void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, +int omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match) { u32 l; + if (unlikely(!timer)) + return -EINVAL; + + omap_dm_timer_enable(timer); l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); if (enable) l |= OMAP_TIMER_CTRL_CE; @@ -482,14 +458,24 @@ void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, l &= ~OMAP_TIMER_CTRL_CE; omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, match); + + /* Save the context */ + timer->context.tclr = l; + timer->context.tmar = match; + omap_dm_timer_disable(timer); + return 0; } EXPORT_SYMBOL_GPL(omap_dm_timer_set_match); -void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, +int omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger) { u32 l; + if (unlikely(!timer)) + return -EINVAL; + + omap_dm_timer_enable(timer); l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); l &= ~(OMAP_TIMER_CTRL_GPOCFG | OMAP_TIMER_CTRL_SCPWM | OMAP_TIMER_CTRL_PT | (0x03 << 10)); @@ -499,13 +485,22 @@ void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, l |= OMAP_TIMER_CTRL_PT; l |= trigger << 10; omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); + + /* Save the context */ + timer->context.tclr = l; + omap_dm_timer_disable(timer); + return 0; } EXPORT_SYMBOL_GPL(omap_dm_timer_set_pwm); -void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler) +int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler) { u32 l; + if (unlikely(!timer)) + return -EINVAL; + + omap_dm_timer_enable(timer); l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); l &= ~(OMAP_TIMER_CTRL_PRE | (0x07 << 2)); if (prescaler >= 0x00 && prescaler <= 0x07) { @@ -513,13 +508,28 @@ void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler) l |= prescaler << 2; } omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); + + /* Save the context */ + timer->context.tclr = l; + omap_dm_timer_disable(timer); + return 0; } EXPORT_SYMBOL_GPL(omap_dm_timer_set_prescaler); -void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, +int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value) { - __omap_dm_timer_int_enable(timer->io_base, value); + if (unlikely(!timer)) + return -EINVAL; + + omap_dm_timer_enable(timer); + __omap_dm_timer_int_enable(timer, value); + + /* Save the context */ + timer->context.tier = value; + timer->context.twer = value; + omap_dm_timer_disable(timer); + return 0; } EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_enable); @@ -527,40 +537,61 @@ unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer) { unsigned int l; - l = omap_dm_timer_read_reg(timer, OMAP_TIMER_STAT_REG); + if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) { + pr_err("%s: timer not available or enabled.\n", __func__); + return 0; + } + + l = __raw_readl(timer->irq_stat); return l; } EXPORT_SYMBOL_GPL(omap_dm_timer_read_status); -void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value) +int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value) { - __omap_dm_timer_write_status(timer->io_base, value); + if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) + return -EINVAL; + + __omap_dm_timer_write_status(timer, value); + /* Save the context */ + timer->context.tisr = value; + return 0; } EXPORT_SYMBOL_GPL(omap_dm_timer_write_status); unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer) { - return __omap_dm_timer_read_counter(timer->io_base, timer->posted); + if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) { + pr_err("%s: timer not iavailable or enabled.\n", __func__); + return 0; + } + + return __omap_dm_timer_read_counter(timer, timer->posted); } EXPORT_SYMBOL_GPL(omap_dm_timer_read_counter); -void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value) +int omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value) { + if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) { + pr_err("%s: timer not available or enabled.\n", __func__); + return -EINVAL; + } + omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, value); + + /* Save the context */ + timer->context.tcrr = value; + return 0; } EXPORT_SYMBOL_GPL(omap_dm_timer_write_counter); int omap_dm_timers_active(void) { - int i; - - for (i = 0; i < dm_timer_count; i++) { - struct omap_dm_timer *timer; - - timer = &dm_timers[i]; + struct omap_dm_timer *timer; - if (!timer->enabled) + list_for_each_entry(timer, &omap_timer_list, node) { + if (!timer->reserved) continue; if (omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG) & @@ -572,69 +603,147 @@ int omap_dm_timers_active(void) } EXPORT_SYMBOL_GPL(omap_dm_timers_active); -static int __init omap_dm_timer_init(void) +/** + * omap_dm_timer_probe - probe function called for every registered device + * @pdev: pointer to current timer platform device + * + * Called by driver framework at the end of device registration for all + * timer devices. + */ +static int __devinit omap_dm_timer_probe(struct platform_device *pdev) { + int ret; + unsigned long flags; struct omap_dm_timer *timer; - int i, map_size = SZ_8K; /* Module 4KB + L4 4KB except on omap1 */ + struct resource *mem, *irq, *ioarea; + struct dmtimer_platform_data *pdata = pdev->dev.platform_data; - if (!(cpu_is_omap16xx() || cpu_class_is_omap2())) + if (!pdata) { + dev_err(&pdev->dev, "%s: no platform data.\n", __func__); return -ENODEV; + } - spin_lock_init(&dm_timer_lock); - - if (cpu_class_is_omap1()) { - dm_timers = omap1_dm_timers; - dm_timer_count = omap1_dm_timer_count; - map_size = SZ_2K; - } else if (cpu_is_omap24xx()) { - dm_timers = omap2_dm_timers; - dm_timer_count = omap2_dm_timer_count; - dm_source_names = omap2_dm_source_names; - dm_source_clocks = omap2_dm_source_clocks; - } else if (cpu_is_omap34xx()) { - dm_timers = omap3_dm_timers; - dm_timer_count = omap3_dm_timer_count; - dm_source_names = omap3_dm_source_names; - dm_source_clocks = omap3_dm_source_clocks; - } else if (cpu_is_omap44xx()) { - dm_timers = omap4_dm_timers; - dm_timer_count = omap4_dm_timer_count; - dm_source_names = omap4_dm_source_names; - dm_source_clocks = omap4_dm_source_clocks; + irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (unlikely(!irq)) { + dev_err(&pdev->dev, "%s: no IRQ resource.\n", __func__); + return -ENODEV; } - if (cpu_class_is_omap2()) - for (i = 0; dm_source_names[i] != NULL; i++) - dm_source_clocks[i] = clk_get(NULL, dm_source_names[i]); + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(!mem)) { + dev_err(&pdev->dev, "%s: no memory resource.\n", __func__); + return -ENODEV; + } - if (cpu_is_omap243x()) - dm_timers[0].phys_base = 0x49018000; + ioarea = request_mem_region(mem->start, resource_size(mem), + pdev->name); + if (!ioarea) { + dev_err(&pdev->dev, "%s: region already claimed.\n", __func__); + return -EBUSY; + } - for (i = 0; i < dm_timer_count; i++) { - timer = &dm_timers[i]; + timer = kzalloc(sizeof(struct omap_dm_timer), GFP_KERNEL); + if (!timer) { + dev_err(&pdev->dev, "%s: no memory for omap_dm_timer.\n", + __func__); + ret = -ENOMEM; + goto err_free_ioregion; + } - /* Static mapping, never released */ - timer->io_base = ioremap(timer->phys_base, map_size); - BUG_ON(!timer->io_base); + timer->io_base = ioremap(mem->start, resource_size(mem)); + if (!timer->io_base) { + dev_err(&pdev->dev, "%s: ioremap failed.\n", __func__); + ret = -ENOMEM; + goto err_free_mem; + } -#ifdef CONFIG_ARCH_OMAP2PLUS - if (cpu_class_is_omap2()) { - char clk_name[16]; - sprintf(clk_name, "gpt%d_ick", i + 1); - timer->iclk = clk_get(NULL, clk_name); - sprintf(clk_name, "gpt%d_fck", i + 1); - timer->fclk = clk_get(NULL, clk_name); - } + timer->id = pdev->id; + timer->irq = irq->start; + timer->reserved = pdata->reserved; + timer->pdev = pdev; + timer->loses_context = pdata->loses_context; + timer->get_context_loss_count = pdata->get_context_loss_count; + + /* Skip pm_runtime_enable for OMAP1 */ + if (!pdata->needs_manual_reset) { + pm_runtime_enable(&pdev->dev); + pm_runtime_irq_safe(&pdev->dev); + } - /* One or two timers may be set up early for sys_timer */ - if (sys_timer_reserved & (1 << i)) { - timer->reserved = 1; - timer->posted = 1; - } -#endif + if (!timer->reserved) { + pm_runtime_get_sync(&pdev->dev); + __omap_dm_timer_init_regs(timer); + pm_runtime_put(&pdev->dev); } + /* add the timer element to the list */ + spin_lock_irqsave(&dm_timer_lock, flags); + list_add_tail(&timer->node, &omap_timer_list); + spin_unlock_irqrestore(&dm_timer_lock, flags); + + dev_dbg(&pdev->dev, "Device Probed.\n"); + return 0; + +err_free_mem: + kfree(timer); + +err_free_ioregion: + release_mem_region(mem->start, resource_size(mem)); + + return ret; } -arch_initcall(omap_dm_timer_init); +/** + * omap_dm_timer_remove - cleanup a registered timer device + * @pdev: pointer to current timer platform device + * + * Called by driver framework whenever a timer device is unregistered. + * In addition to freeing platform resources it also deletes the timer + * entry from the local list. + */ +static int __devexit omap_dm_timer_remove(struct platform_device *pdev) +{ + struct omap_dm_timer *timer; + unsigned long flags; + int ret = -EINVAL; + + spin_lock_irqsave(&dm_timer_lock, flags); + list_for_each_entry(timer, &omap_timer_list, node) + if (timer->pdev->id == pdev->id) { + list_del(&timer->node); + kfree(timer); + ret = 0; + break; + } + spin_unlock_irqrestore(&dm_timer_lock, flags); + + return ret; +} + +static struct platform_driver omap_dm_timer_driver = { + .probe = omap_dm_timer_probe, + .remove = omap_dm_timer_remove, + .driver = { + .name = "omap_timer", + }, +}; + +static int __init omap_dm_timer_driver_init(void) +{ + return platform_driver_register(&omap_dm_timer_driver); +} + +static void __exit omap_dm_timer_driver_exit(void) +{ + platform_driver_unregister(&omap_dm_timer_driver); +} + +early_platform_init("earlytimer", &omap_dm_timer_driver); +module_init(omap_dm_timer_driver_init); +module_exit(omap_dm_timer_driver_exit); + +MODULE_DESCRIPTION("OMAP Dual-Mode Timer Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRIVER_NAME); +MODULE_AUTHOR("Texas Instruments Inc"); diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index 3341ca4703e..c20beb8ed38 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -123,19 +123,11 @@ static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t) omap_pm_set_max_mpu_wakeup_lat(dev, t); } -static struct omap_device_pm_latency omap_i2c_latency[] = { - [0] = { - .deactivate_func = omap_device_idle_hwmods, - .activate_func = omap_device_enable_hwmods, - .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, - }, -}; - static inline int omap2_i2c_add_bus(int bus_id) { int l; struct omap_hwmod *oh; - struct omap_device *od; + struct platform_device *pdev; char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN]; struct omap_i2c_bus_platform_data *pdata; @@ -160,12 +152,12 @@ static inline int omap2_i2c_add_bus(int bus_id) */ if (cpu_is_omap34xx()) pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat; - od = omap_device_build(name, bus_id, oh, pdata, + pdev = omap_device_build(name, bus_id, oh, pdata, sizeof(struct omap_i2c_bus_platform_data), - omap_i2c_latency, ARRAY_SIZE(omap_i2c_latency), 0); - WARN(IS_ERR(od), "Could not build omap_device for %s\n", name); + NULL, 0, 0); + WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name); - return PTR_ERR(od); + return PTR_ERR(pdev); } #else static inline int omap2_i2c_add_bus(int bus_id) diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h index df4b9683f17..197ca03c3f7 100644 --- a/arch/arm/plat-omap/include/plat/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -80,8 +80,6 @@ struct clkops { * * @div is the divisor that should be applied to the parent clock's rate * to produce the current clock's rate. - * - * XXX @flags probably should be replaced with an struct omap_chip. */ struct clksel_rate { u32 val; diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index 4564cc697d7..c50df4814f6 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -45,6 +45,18 @@ extern unsigned long long notrace omap_32k_sched_clock(void); extern void omap_reserve(void); +void omap2420_init_early(void); +void omap2430_init_early(void); +void omap3430_init_early(void); +void omap35xx_init_early(void); +void omap3630_init_early(void); +void omap3_init_early(void); /* Do not use this one */ +void am35xx_init_early(void); +void ti816x_init_early(void); +void omap4430_init_early(void); + +void omap_sram_init(void); + /* * IO bases for various OMAP processors * Except the tap base, rest all the io bases @@ -53,13 +65,13 @@ extern void omap_reserve(void); struct omap_globals { u32 class; /* OMAP class to detect */ void __iomem *tap; /* Control module ID code */ - unsigned long sdrc; /* SDRAM Controller */ - unsigned long sms; /* SDRAM Memory Scheduler */ - unsigned long ctrl; /* System Control Module */ - unsigned long ctrl_pad; /* PAD Control Module */ - unsigned long prm; /* Power and Reset Management */ - unsigned long cm; /* Clock Management */ - unsigned long cm2; + void __iomem *sdrc; /* SDRAM Controller */ + void __iomem *sms; /* SDRAM Memory Scheduler */ + void __iomem *ctrl; /* System Control Module */ + void __iomem *ctrl_pad; /* PAD Control Module */ + void __iomem *prm; /* Power and Reset Management */ + void __iomem *cm; /* Clock Management */ + void __iomem *cm2; }; void omap2_set_globals_242x(void); @@ -74,7 +86,11 @@ void omap2_set_globals_sdrc(struct omap_globals *); void omap2_set_globals_control(struct omap_globals *); void omap2_set_globals_prcm(struct omap_globals *); +void omap242x_map_io(void); +void omap243x_map_io(void); void omap3_map_io(void); +void omap4_map_io(void); + /** * omap_test_timeout - busy-loop, testing a condition diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 67b3d75884c..2f902694222 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -44,13 +44,6 @@ int omap_type(void); -struct omap_chip_id { - u16 oc; - u8 type; -}; - -#define OMAP_CHIP_INIT(x) { .oc = x } - /* * omap_rev bits: * CPU id bits (0730, 1510, 1710, 2422...) [31:16] @@ -60,19 +53,6 @@ struct omap_chip_id { unsigned int omap_rev(void); /* - * Define CPU revision bits - * - * Verbose meaning of the revision bits may be different for a silicon - * family. This difference can be handled separately. - */ -#define OMAP_REVBITS_00 0x00 -#define OMAP_REVBITS_01 0x01 -#define OMAP_REVBITS_02 0x02 -#define OMAP_REVBITS_03 0x03 -#define OMAP_REVBITS_04 0x04 -#define OMAP_REVBITS_05 0x05 - -/* * Get the CPU revision for OMAP devices */ #define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff) @@ -262,7 +242,7 @@ IS_OMAP_TYPE(2422, 0x2422) IS_OMAP_TYPE(2423, 0x2423) IS_OMAP_TYPE(2430, 0x2430) IS_OMAP_TYPE(3430, 0x3430) -IS_OMAP_TYPE(3505, 0x3505) +IS_OMAP_TYPE(3505, 0x3517) IS_OMAP_TYPE(3517, 0x3517) #define cpu_is_omap310() 0 @@ -354,8 +334,9 @@ IS_OMAP_TYPE(3517, 0x3517) (!omap3_has_sgx()) && \ (omap3_has_iva())) # define cpu_is_omap3530() (cpu_is_omap3430()) -# define cpu_is_omap3505() is_omap3505() # define cpu_is_omap3517() is_omap3517() +# define cpu_is_omap3505() (cpu_is_omap3517() && \ + !omap3_has_sgx()) # undef cpu_is_omap3630 # define cpu_is_omap3630() is_omap363x() # define cpu_is_ti816x() is_ti816x() @@ -379,35 +360,31 @@ IS_OMAP_TYPE(3517, 0x3517) /* Various silicon revisions for omap2 */ #define OMAP242X_CLASS 0x24200024 #define OMAP2420_REV_ES1_0 OMAP242X_CLASS -#define OMAP2420_REV_ES2_0 (OMAP242X_CLASS | (OMAP_REVBITS_01 << 8)) +#define OMAP2420_REV_ES2_0 (OMAP242X_CLASS | (0x1 << 8)) #define OMAP243X_CLASS 0x24300024 #define OMAP2430_REV_ES1_0 OMAP243X_CLASS #define OMAP343X_CLASS 0x34300034 #define OMAP3430_REV_ES1_0 OMAP343X_CLASS -#define OMAP3430_REV_ES2_0 (OMAP343X_CLASS | (OMAP_REVBITS_01 << 8)) -#define OMAP3430_REV_ES2_1 (OMAP343X_CLASS | (OMAP_REVBITS_02 << 8)) -#define OMAP3430_REV_ES3_0 (OMAP343X_CLASS | (OMAP_REVBITS_03 << 8)) -#define OMAP3430_REV_ES3_1 (OMAP343X_CLASS | (OMAP_REVBITS_04 << 8)) -#define OMAP3430_REV_ES3_1_2 (OMAP343X_CLASS | (OMAP_REVBITS_05 << 8)) +#define OMAP3430_REV_ES2_0 (OMAP343X_CLASS | (0x1 << 8)) +#define OMAP3430_REV_ES2_1 (OMAP343X_CLASS | (0x2 << 8)) +#define OMAP3430_REV_ES3_0 (OMAP343X_CLASS | (0x3 << 8)) +#define OMAP3430_REV_ES3_1 (OMAP343X_CLASS | (0x4 << 8)) +#define OMAP3430_REV_ES3_1_2 (OMAP343X_CLASS | (0x5 << 8)) #define OMAP363X_CLASS 0x36300034 #define OMAP3630_REV_ES1_0 OMAP363X_CLASS -#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (OMAP_REVBITS_01 << 8)) -#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (OMAP_REVBITS_02 << 8)) +#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (0x1 << 8)) +#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (0x2 << 8)) -#define OMAP35XX_CLASS 0x35000034 -#define OMAP3503_REV(v) (OMAP35XX_CLASS | (0x3503 << 16) | (v << 8)) -#define OMAP3515_REV(v) (OMAP35XX_CLASS | (0x3515 << 16) | (v << 8)) -#define OMAP3525_REV(v) (OMAP35XX_CLASS | (0x3525 << 16) | (v << 8)) -#define OMAP3530_REV(v) (OMAP35XX_CLASS | (0x3530 << 16) | (v << 8)) -#define OMAP3505_REV(v) (OMAP35XX_CLASS | (0x3505 << 16) | (v << 8)) -#define OMAP3517_REV(v) (OMAP35XX_CLASS | (0x3517 << 16) | (v << 8)) +#define OMAP3517_CLASS 0x35170034 +#define OMAP3517_REV_ES1_0 OMAP3517_CLASS +#define OMAP3517_REV_ES1_1 (OMAP3517_CLASS | (0x1 << 8)) #define TI816X_CLASS 0x81600034 #define TI8168_REV_ES1_0 TI816X_CLASS -#define TI8168_REV_ES1_1 (TI816X_CLASS | (OMAP_REVBITS_01 << 8)) +#define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8)) #define OMAP443X_CLASS 0x44300044 #define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8)) @@ -418,61 +395,6 @@ IS_OMAP_TYPE(3517, 0x3517) #define OMAP446X_CLASS 0x44600044 #define OMAP4460_REV_ES1_0 (OMAP446X_CLASS | (0x10 << 8)) -/* - * omap_chip bits - * - * CHIP_IS_OMAP{2420,2430,3430} indicate that a particular structure is - * valid on all chips of that type. CHIP_IS_OMAP3430ES{1,2} indicates - * something that is only valid on that particular ES revision. - * - * These bits may be ORed together to indicate structures that are - * available on multiple chip types. - * - * To test whether a particular structure matches the current OMAP chip type, - * use omap_chip_is(). - * - */ -#define CHIP_IS_OMAP2420 (1 << 0) -#define CHIP_IS_OMAP2430 (1 << 1) -#define CHIP_IS_OMAP3430 (1 << 2) -#define CHIP_IS_OMAP3430ES1 (1 << 3) -#define CHIP_IS_OMAP3430ES2 (1 << 4) -#define CHIP_IS_OMAP3430ES3_0 (1 << 5) -#define CHIP_IS_OMAP3430ES3_1 (1 << 6) -#define CHIP_IS_OMAP3630ES1 (1 << 7) -#define CHIP_IS_OMAP4430ES1 (1 << 8) -#define CHIP_IS_OMAP3630ES1_1 (1 << 9) -#define CHIP_IS_OMAP3630ES1_2 (1 << 10) -#define CHIP_IS_OMAP4430ES2 (1 << 11) -#define CHIP_IS_OMAP4430ES2_1 (1 << 12) -#define CHIP_IS_OMAP4430ES2_2 (1 << 13) -#define CHIP_IS_TI816X (1 << 14) -#define CHIP_IS_OMAP4460ES1_0 (1 << 15) - -#define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430) - -#define CHIP_IS_OMAP4430 (CHIP_IS_OMAP4430ES1 | \ - CHIP_IS_OMAP4430ES2 | \ - CHIP_IS_OMAP4430ES2_1 | \ - CHIP_IS_OMAP4430ES2_2 | \ - CHIP_IS_OMAP4460ES1_0) - -/* - * "GE" here represents "greater than or equal to" in terms of ES - * levels. So CHIP_GE_OMAP3430ES2 is intended to match all OMAP3430 - * chips at ES2 and beyond, but not, for example, any OMAP lines after - * OMAP3. - */ -#define CHIP_GE_OMAP3430ES2 (CHIP_IS_OMAP3430ES2 | \ - CHIP_IS_OMAP3430ES3_0 | \ - CHIP_GE_OMAP3430ES3_1) -#define CHIP_GE_OMAP3430ES3_1 (CHIP_IS_OMAP3430ES3_1 | \ - CHIP_IS_OMAP3630ES1 | \ - CHIP_GE_OMAP3630ES1_1) -#define CHIP_GE_OMAP3630ES1_1 (CHIP_IS_OMAP3630ES1_1 | \ - CHIP_IS_OMAP3630ES1_2) - -int omap_chip_is(struct omap_chip_id oci); void omap2_check_revision(void); /* diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index eb5d16c60cd..d11025e6e7a 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -1,5 +1,5 @@ /* - * arch/arm/plat-omap/include/mach/dmtimer.h + * arch/arm/plat-omap/include/plat/dmtimer.h * * OMAP Dual-Mode Timers * @@ -35,6 +35,7 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/io.h> +#include <linux/platform_device.h> #ifndef __ASM_ARCH_DMTIMER_H #define __ASM_ARCH_DMTIMER_H @@ -59,12 +60,56 @@ * in OMAP4 can be distinguished. */ #define OMAP_TIMER_IP_VERSION_1 0x1 + +/* timer capabilities used in hwmod database */ +#define OMAP_TIMER_SECURE 0x80000000 +#define OMAP_TIMER_ALWON 0x40000000 +#define OMAP_TIMER_HAS_PWM 0x20000000 + +struct omap_timer_capability_dev_attr { + u32 timer_capability; +}; + struct omap_dm_timer; struct clk; +struct timer_regs { + u32 tidr; + u32 tiocp_cfg; + u32 tistat; + u32 tisr; + u32 tier; + u32 twer; + u32 tclr; + u32 tcrr; + u32 tldr; + u32 ttrg; + u32 twps; + u32 tmar; + u32 tcar1; + u32 tsicr; + u32 tcar2; + u32 tpir; + u32 tnir; + u32 tcvr; + u32 tocr; + u32 towr; +}; + +struct dmtimer_platform_data { + int (*set_timer_src)(struct platform_device *pdev, int source); + int timer_ip_version; + u32 needs_manual_reset:1; + bool reserved; + + bool loses_context; + + u32 (*get_context_loss_count)(struct device *dev); +}; + struct omap_dm_timer *omap_dm_timer_request(void); struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id); -void omap_dm_timer_free(struct omap_dm_timer *timer); +int omap_dm_timer_free(struct omap_dm_timer *timer); void omap_dm_timer_enable(struct omap_dm_timer *timer); void omap_dm_timer_disable(struct omap_dm_timer *timer); @@ -73,23 +118,23 @@ int omap_dm_timer_get_irq(struct omap_dm_timer *timer); u32 omap_dm_timer_modify_idlect_mask(u32 inputmask); struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer); -void omap_dm_timer_trigger(struct omap_dm_timer *timer); -void omap_dm_timer_start(struct omap_dm_timer *timer); -void omap_dm_timer_stop(struct omap_dm_timer *timer); +int omap_dm_timer_trigger(struct omap_dm_timer *timer); +int omap_dm_timer_start(struct omap_dm_timer *timer); +int omap_dm_timer_stop(struct omap_dm_timer *timer); int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source); -void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value); -void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value); -void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match); -void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger); -void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler); +int omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value); +int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value); +int omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match); +int omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger); +int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler); -void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value); +int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value); unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer); -void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value); +int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value); unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer); -void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value); +int omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value); int omap_dm_timers_active(void); @@ -98,12 +143,30 @@ int omap_dm_timers_active(void); * used by dmtimer.c and sys_timer related code. */ -/* register offsets */ -#define _OMAP_TIMER_ID_OFFSET 0x00 -#define _OMAP_TIMER_OCP_CFG_OFFSET 0x10 -#define _OMAP_TIMER_SYS_STAT_OFFSET 0x14 -#define _OMAP_TIMER_STAT_OFFSET 0x18 -#define _OMAP_TIMER_INT_EN_OFFSET 0x1c +/* + * The interrupt registers are different between v1 and v2 ip. + * These registers are offsets from timer->iobase. + */ +#define OMAP_TIMER_ID_OFFSET 0x00 +#define OMAP_TIMER_OCP_CFG_OFFSET 0x10 + +#define OMAP_TIMER_V1_SYS_STAT_OFFSET 0x14 +#define OMAP_TIMER_V1_STAT_OFFSET 0x18 +#define OMAP_TIMER_V1_INT_EN_OFFSET 0x1c + +#define OMAP_TIMER_V2_IRQSTATUS_RAW 0x24 +#define OMAP_TIMER_V2_IRQSTATUS 0x28 +#define OMAP_TIMER_V2_IRQENABLE_SET 0x2c +#define OMAP_TIMER_V2_IRQENABLE_CLR 0x30 + +/* + * The functional registers have a different base on v1 and v2 ip. + * These registers are offsets from timer->func_base. The func_base + * is samae as io_base for v1 and io_base + 0x14 for v2 ip. + * + */ +#define OMAP_TIMER_V2_FUNC_OFFSET 0x14 + #define _OMAP_TIMER_WAKEUP_EN_OFFSET 0x20 #define _OMAP_TIMER_CTRL_OFFSET 0x24 #define OMAP_TIMER_CTRL_GPOCFG (1 << 14) @@ -147,21 +210,6 @@ int omap_dm_timers_active(void); /* register offsets with the write pending bit encoded */ #define WPSHIFT 16 -#define OMAP_TIMER_ID_REG (_OMAP_TIMER_ID_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_OCP_CFG_REG (_OMAP_TIMER_OCP_CFG_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_SYS_STAT_REG (_OMAP_TIMER_SYS_STAT_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_STAT_REG (_OMAP_TIMER_STAT_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_INT_EN_REG (_OMAP_TIMER_INT_EN_OFFSET \ - | (WP_NONE << WPSHIFT)) - #define OMAP_TIMER_WAKEUP_EN_REG (_OMAP_TIMER_WAKEUP_EN_OFFSET \ | (WP_NONE << WPSHIFT)) @@ -209,49 +257,88 @@ int omap_dm_timers_active(void); struct omap_dm_timer { unsigned long phys_base; + int id; int irq; -#ifdef CONFIG_ARCH_OMAP2PLUS struct clk *iclk, *fclk; -#endif - void __iomem *io_base; + + void __iomem *io_base; + void __iomem *sys_stat; /* TISTAT timer status */ + void __iomem *irq_stat; /* TISR/IRQSTATUS interrupt status */ + void __iomem *irq_ena; /* irq enable */ + void __iomem *irq_dis; /* irq disable, only on v2 ip */ + void __iomem *pend; /* write pending */ + void __iomem *func_base; /* function register base */ + unsigned long rate; unsigned reserved:1; - unsigned enabled:1; unsigned posted:1; + struct timer_regs context; + bool loses_context; + int ctx_loss_count; + int revision; + struct platform_device *pdev; + struct list_head node; + + u32 (*get_context_loss_count)(struct device *dev); }; -extern u32 sys_timer_reserved; -void omap_dm_timer_prepare(struct omap_dm_timer *timer); +int omap_dm_timer_prepare(struct omap_dm_timer *timer); -static inline u32 __omap_dm_timer_read(void __iomem *base, u32 reg, +static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg, int posted) { if (posted) - while (__raw_readl(base + (OMAP_TIMER_WRITE_PEND_REG & 0xff)) - & (reg >> WPSHIFT)) + while (__raw_readl(timer->pend) & (reg >> WPSHIFT)) cpu_relax(); - return __raw_readl(base + (reg & 0xff)); + return __raw_readl(timer->func_base + (reg & 0xff)); } -static inline void __omap_dm_timer_write(void __iomem *base, u32 reg, u32 val, - int posted) +static inline void __omap_dm_timer_write(struct omap_dm_timer *timer, + u32 reg, u32 val, int posted) { if (posted) - while (__raw_readl(base + (OMAP_TIMER_WRITE_PEND_REG & 0xff)) - & (reg >> WPSHIFT)) + while (__raw_readl(timer->pend) & (reg >> WPSHIFT)) cpu_relax(); - __raw_writel(val, base + (reg & 0xff)); + __raw_writel(val, timer->func_base + (reg & 0xff)); +} + +static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer) +{ + u32 tidr; + + /* Assume v1 ip if bits [31:16] are zero */ + tidr = __raw_readl(timer->io_base); + if (!(tidr >> 16)) { + timer->revision = 1; + timer->sys_stat = timer->io_base + + OMAP_TIMER_V1_SYS_STAT_OFFSET; + timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET; + timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET; + timer->irq_dis = 0; + timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET; + timer->func_base = timer->io_base; + } else { + timer->revision = 2; + timer->sys_stat = 0; + timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS; + timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET; + timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR; + timer->pend = timer->io_base + + _OMAP_TIMER_WRITE_PEND_OFFSET + + OMAP_TIMER_V2_FUNC_OFFSET; + timer->func_base = timer->io_base + OMAP_TIMER_V2_FUNC_OFFSET; + } } /* Assumes the source clock has been set by caller */ -static inline void __omap_dm_timer_reset(void __iomem *base, int autoidle, - int wakeup) +static inline void __omap_dm_timer_reset(struct omap_dm_timer *timer, + int autoidle, int wakeup) { u32 l; - l = __omap_dm_timer_read(base, OMAP_TIMER_OCP_CFG_REG, 0); + l = __raw_readl(timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET); l |= 0x02 << 3; /* Set to smart-idle mode */ l |= 0x2 << 8; /* Set clock activity to perserve f-clock on idle */ @@ -261,10 +348,10 @@ static inline void __omap_dm_timer_reset(void __iomem *base, int autoidle, if (wakeup) l |= 1 << 2; - __omap_dm_timer_write(base, OMAP_TIMER_OCP_CFG_REG, l, 0); + __raw_writel(l, timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET); /* Match hardware reset default of posted mode */ - __omap_dm_timer_write(base, OMAP_TIMER_IF_CTRL_REG, + __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, OMAP_TIMER_CTRL_POSTED, 0); } @@ -286,18 +373,18 @@ static inline int __omap_dm_timer_set_source(struct clk *timer_fck, return ret; } -static inline void __omap_dm_timer_stop(void __iomem *base, int posted, - unsigned long rate) +static inline void __omap_dm_timer_stop(struct omap_dm_timer *timer, + int posted, unsigned long rate) { u32 l; - l = __omap_dm_timer_read(base, OMAP_TIMER_CTRL_REG, posted); + l = __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted); if (l & OMAP_TIMER_CTRL_ST) { l &= ~0x1; - __omap_dm_timer_write(base, OMAP_TIMER_CTRL_REG, l, posted); + __omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, l, posted); #ifdef CONFIG_ARCH_OMAP2PLUS /* Readback to make sure write has completed */ - __omap_dm_timer_read(base, OMAP_TIMER_CTRL_REG, posted); + __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted); /* * Wait for functional clock period x 3.5 to make sure that * timer is stopped @@ -307,34 +394,34 @@ static inline void __omap_dm_timer_stop(void __iomem *base, int posted, } /* Ack possibly pending interrupt */ - __omap_dm_timer_write(base, OMAP_TIMER_STAT_REG, - OMAP_TIMER_INT_OVERFLOW, 0); + __raw_writel(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat); } -static inline void __omap_dm_timer_load_start(void __iomem *base, u32 ctrl, - unsigned int load, int posted) +static inline void __omap_dm_timer_load_start(struct omap_dm_timer *timer, + u32 ctrl, unsigned int load, + int posted) { - __omap_dm_timer_write(base, OMAP_TIMER_COUNTER_REG, load, posted); - __omap_dm_timer_write(base, OMAP_TIMER_CTRL_REG, ctrl, posted); + __omap_dm_timer_write(timer, OMAP_TIMER_COUNTER_REG, load, posted); + __omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, ctrl, posted); } -static inline void __omap_dm_timer_int_enable(void __iomem *base, +static inline void __omap_dm_timer_int_enable(struct omap_dm_timer *timer, unsigned int value) { - __omap_dm_timer_write(base, OMAP_TIMER_INT_EN_REG, value, 0); - __omap_dm_timer_write(base, OMAP_TIMER_WAKEUP_EN_REG, value, 0); + __raw_writel(value, timer->irq_ena); + __omap_dm_timer_write(timer, OMAP_TIMER_WAKEUP_EN_REG, value, 0); } -static inline unsigned int __omap_dm_timer_read_counter(void __iomem *base, - int posted) +static inline unsigned int +__omap_dm_timer_read_counter(struct omap_dm_timer *timer, int posted) { - return __omap_dm_timer_read(base, OMAP_TIMER_COUNTER_REG, posted); + return __omap_dm_timer_read(timer, OMAP_TIMER_COUNTER_REG, posted); } -static inline void __omap_dm_timer_write_status(void __iomem *base, +static inline void __omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value) { - __omap_dm_timer_write(base, OMAP_TIMER_STAT_REG, value, 0); + __raw_writel(value, timer->irq_stat); } #endif /* __ASM_ARCH_DMTIMER_H */ diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h index ebe67ea8d06..7f2969eadb8 100644 --- a/arch/arm/plat-omap/include/plat/io.h +++ b/arch/arm/plat-omap/include/plat/io.h @@ -228,13 +228,13 @@ #define OMAP44XX_EMIF2_PHYS OMAP44XX_EMIF2_BASE /* 0x4d000000 --> 0xfd200000 */ -#define OMAP44XX_EMIF2_VIRT (OMAP44XX_EMIF2_PHYS + OMAP4_L3_PER_IO_OFFSET) #define OMAP44XX_EMIF2_SIZE SZ_1M +#define OMAP44XX_EMIF2_VIRT (OMAP44XX_EMIF1_VIRT + OMAP44XX_EMIF1_SIZE) #define OMAP44XX_DMM_PHYS OMAP44XX_DMM_BASE /* 0x4e000000 --> 0xfd300000 */ -#define OMAP44XX_DMM_VIRT (OMAP44XX_DMM_PHYS + OMAP4_L3_PER_IO_OFFSET) #define OMAP44XX_DMM_SIZE SZ_1M +#define OMAP44XX_DMM_VIRT (OMAP44XX_EMIF2_VIRT + OMAP44XX_EMIF2_SIZE) /* * ---------------------------------------------------------------------------- * Omap specific register access @@ -247,6 +247,8 @@ * NOTE: Please use ioremap + __raw_read/write where possible instead of these */ +void omap_ioremap_init(void); + extern u8 omap_readb(u32 pa); extern u16 omap_readw(u32 pa); extern u32 omap_readl(u32 pa); @@ -256,8 +258,31 @@ extern void omap_writel(u32 v, u32 pa); struct omap_sdrc_params; -extern void omap1_map_common_io(void); -extern void omap1_init_common_hw(void); +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) +void omap7xx_map_io(void); +#else +static inline void omap_map_io(void) +{ +} +#endif + +#ifdef CONFIG_ARCH_OMAP15XX +void omap15xx_map_io(void); +#else +static inline void omap15xx_map_io(void) +{ +} +#endif + +#ifdef CONFIG_ARCH_OMAP16XX +void omap16xx_map_io(void); +#else +static inline void omap16xx_map_io(void) +{ +} +#endif + +void omap1_init_early(void); #ifdef CONFIG_SOC_OMAP2420 extern void omap242x_map_common_io(void); @@ -300,7 +325,7 @@ static inline void omap44xx_map_common_io(void) #endif extern void omap2_init_common_infrastructure(void); -extern void omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0, +extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0, struct omap_sdrc_params *sdrc_cs1); #define __arch_ioremap omap_ioremap diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h index 9882c657b2d..8fa74e2c9d6 100644 --- a/arch/arm/plat-omap/include/plat/mcbsp.h +++ b/arch/arm/plat-omap/include/plat/mcbsp.h @@ -25,9 +25,7 @@ #define __ASM_ARCH_OMAP_MCBSP_H #include <linux/spinlock.h> - -#include <mach/hardware.h> -#include <plat/clock.h> +#include <linux/clk.h> /* macro for building platform_device for McBSP ports */ #define OMAP_MCBSP_PLATFORM_DEVICE(port_nr) \ @@ -40,104 +38,60 @@ static struct platform_device omap_mcbsp##port_nr = { \ #define MCBSP_CONFIG_TYPE3 0x3 #define MCBSP_CONFIG_TYPE4 0x4 -#define OMAP7XX_MCBSP1_BASE 0xfffb1000 -#define OMAP7XX_MCBSP2_BASE 0xfffb1800 - -#define OMAP1510_MCBSP1_BASE 0xe1011800 -#define OMAP1510_MCBSP2_BASE 0xfffb1000 -#define OMAP1510_MCBSP3_BASE 0xe1017000 - -#define OMAP1610_MCBSP1_BASE 0xe1011800 -#define OMAP1610_MCBSP2_BASE 0xfffb1000 -#define OMAP1610_MCBSP3_BASE 0xe1017000 - -#ifdef CONFIG_ARCH_OMAP1 - -#define OMAP_MCBSP_REG_DRR2 0x00 -#define OMAP_MCBSP_REG_DRR1 0x02 -#define OMAP_MCBSP_REG_DXR2 0x04 -#define OMAP_MCBSP_REG_DXR1 0x06 -#define OMAP_MCBSP_REG_DRR 0x02 -#define OMAP_MCBSP_REG_DXR 0x06 -#define OMAP_MCBSP_REG_SPCR2 0x08 -#define OMAP_MCBSP_REG_SPCR1 0x0a -#define OMAP_MCBSP_REG_RCR2 0x0c -#define OMAP_MCBSP_REG_RCR1 0x0e -#define OMAP_MCBSP_REG_XCR2 0x10 -#define OMAP_MCBSP_REG_XCR1 0x12 -#define OMAP_MCBSP_REG_SRGR2 0x14 -#define OMAP_MCBSP_REG_SRGR1 0x16 -#define OMAP_MCBSP_REG_MCR2 0x18 -#define OMAP_MCBSP_REG_MCR1 0x1a -#define OMAP_MCBSP_REG_RCERA 0x1c -#define OMAP_MCBSP_REG_RCERB 0x1e -#define OMAP_MCBSP_REG_XCERA 0x20 -#define OMAP_MCBSP_REG_XCERB 0x22 -#define OMAP_MCBSP_REG_PCR0 0x24 -#define OMAP_MCBSP_REG_RCERC 0x26 -#define OMAP_MCBSP_REG_RCERD 0x28 -#define OMAP_MCBSP_REG_XCERC 0x2A -#define OMAP_MCBSP_REG_XCERD 0x2C -#define OMAP_MCBSP_REG_RCERE 0x2E -#define OMAP_MCBSP_REG_RCERF 0x30 -#define OMAP_MCBSP_REG_XCERE 0x32 -#define OMAP_MCBSP_REG_XCERF 0x34 -#define OMAP_MCBSP_REG_RCERG 0x36 -#define OMAP_MCBSP_REG_RCERH 0x38 -#define OMAP_MCBSP_REG_XCERG 0x3A -#define OMAP_MCBSP_REG_XCERH 0x3C - -/* Dummy defines, these are not available on omap1 */ -#define OMAP_MCBSP_REG_XCCR 0x00 -#define OMAP_MCBSP_REG_RCCR 0x00 - -#else - -#define OMAP_MCBSP_REG_DRR2 0x00 -#define OMAP_MCBSP_REG_DRR1 0x04 -#define OMAP_MCBSP_REG_DXR2 0x08 -#define OMAP_MCBSP_REG_DXR1 0x0C -#define OMAP_MCBSP_REG_DRR 0x00 -#define OMAP_MCBSP_REG_DXR 0x08 -#define OMAP_MCBSP_REG_SPCR2 0x10 -#define OMAP_MCBSP_REG_SPCR1 0x14 -#define OMAP_MCBSP_REG_RCR2 0x18 -#define OMAP_MCBSP_REG_RCR1 0x1C -#define OMAP_MCBSP_REG_XCR2 0x20 -#define OMAP_MCBSP_REG_XCR1 0x24 -#define OMAP_MCBSP_REG_SRGR2 0x28 -#define OMAP_MCBSP_REG_SRGR1 0x2C -#define OMAP_MCBSP_REG_MCR2 0x30 -#define OMAP_MCBSP_REG_MCR1 0x34 -#define OMAP_MCBSP_REG_RCERA 0x38 -#define OMAP_MCBSP_REG_RCERB 0x3C -#define OMAP_MCBSP_REG_XCERA 0x40 -#define OMAP_MCBSP_REG_XCERB 0x44 -#define OMAP_MCBSP_REG_PCR0 0x48 -#define OMAP_MCBSP_REG_RCERC 0x4C -#define OMAP_MCBSP_REG_RCERD 0x50 -#define OMAP_MCBSP_REG_XCERC 0x54 -#define OMAP_MCBSP_REG_XCERD 0x58 -#define OMAP_MCBSP_REG_RCERE 0x5C -#define OMAP_MCBSP_REG_RCERF 0x60 -#define OMAP_MCBSP_REG_XCERE 0x64 -#define OMAP_MCBSP_REG_XCERF 0x68 -#define OMAP_MCBSP_REG_RCERG 0x6C -#define OMAP_MCBSP_REG_RCERH 0x70 -#define OMAP_MCBSP_REG_XCERG 0x74 -#define OMAP_MCBSP_REG_XCERH 0x78 -#define OMAP_MCBSP_REG_SYSCON 0x8C -#define OMAP_MCBSP_REG_THRSH2 0x90 -#define OMAP_MCBSP_REG_THRSH1 0x94 -#define OMAP_MCBSP_REG_IRQST 0xA0 -#define OMAP_MCBSP_REG_IRQEN 0xA4 -#define OMAP_MCBSP_REG_WAKEUPEN 0xA8 -#define OMAP_MCBSP_REG_XCCR 0xAC -#define OMAP_MCBSP_REG_RCCR 0xB0 -#define OMAP_MCBSP_REG_XBUFFSTAT 0xB4 -#define OMAP_MCBSP_REG_RBUFFSTAT 0xB8 -#define OMAP_MCBSP_REG_SSELCR 0xBC +/* McBSP register numbers. Register address offset = num * reg_step */ +enum { + /* Common registers */ + OMAP_MCBSP_REG_SPCR2 = 4, + OMAP_MCBSP_REG_SPCR1, + OMAP_MCBSP_REG_RCR2, + OMAP_MCBSP_REG_RCR1, + OMAP_MCBSP_REG_XCR2, + OMAP_MCBSP_REG_XCR1, + OMAP_MCBSP_REG_SRGR2, + OMAP_MCBSP_REG_SRGR1, + OMAP_MCBSP_REG_MCR2, + OMAP_MCBSP_REG_MCR1, + OMAP_MCBSP_REG_RCERA, + OMAP_MCBSP_REG_RCERB, + OMAP_MCBSP_REG_XCERA, + OMAP_MCBSP_REG_XCERB, + OMAP_MCBSP_REG_PCR0, + OMAP_MCBSP_REG_RCERC, + OMAP_MCBSP_REG_RCERD, + OMAP_MCBSP_REG_XCERC, + OMAP_MCBSP_REG_XCERD, + OMAP_MCBSP_REG_RCERE, + OMAP_MCBSP_REG_RCERF, + OMAP_MCBSP_REG_XCERE, + OMAP_MCBSP_REG_XCERF, + OMAP_MCBSP_REG_RCERG, + OMAP_MCBSP_REG_RCERH, + OMAP_MCBSP_REG_XCERG, + OMAP_MCBSP_REG_XCERH, + + /* OMAP1-OMAP2420 registers */ + OMAP_MCBSP_REG_DRR2 = 0, + OMAP_MCBSP_REG_DRR1, + OMAP_MCBSP_REG_DXR2, + OMAP_MCBSP_REG_DXR1, + + /* OMAP2430 and onwards */ + OMAP_MCBSP_REG_DRR = 0, + OMAP_MCBSP_REG_DXR = 2, + OMAP_MCBSP_REG_SYSCON = 35, + OMAP_MCBSP_REG_THRSH2, + OMAP_MCBSP_REG_THRSH1, + OMAP_MCBSP_REG_IRQST = 40, + OMAP_MCBSP_REG_IRQEN, + OMAP_MCBSP_REG_WAKEUPEN, + OMAP_MCBSP_REG_XCCR, + OMAP_MCBSP_REG_RCCR, + OMAP_MCBSP_REG_XBUFFSTAT, + OMAP_MCBSP_REG_RBUFFSTAT, + OMAP_MCBSP_REG_SSELCR, +}; +/* OMAP3 sidetone control registers */ #define OMAP_ST_REG_REV 0x00 #define OMAP_ST_REG_SYSCONFIG 0x10 #define OMAP_ST_REG_IRQSTATUS 0x18 @@ -146,8 +100,6 @@ static struct platform_device omap_mcbsp##port_nr = { \ #define OMAP_ST_REG_SFIRCR 0x28 #define OMAP_ST_REG_SSELCR 0x2C -#endif - /************************** McBSP SPCR1 bit definitions ***********************/ #define RRST 0x0001 #define RRDY 0x0002 @@ -344,20 +296,20 @@ typedef enum { struct omap_mcbsp_ops { void (*request)(unsigned int); void (*free)(unsigned int); - int (*set_clks_src)(u8, u8); }; struct omap_mcbsp_platform_data { - unsigned long phys_base; - u8 dma_rx_sync, dma_tx_sync; - u16 rx_irq, tx_irq; struct omap_mcbsp_ops *ops; -#ifdef CONFIG_ARCH_OMAP3 - /* Sidetone block for McBSP 2 and 3 */ - unsigned long phys_base_st; -#endif u16 buffer_size; - unsigned int mcbsp_config_type; + u8 reg_size; + u8 reg_step; + + /* McBSP platform and instance specific features */ + bool has_wakeup; /* Wakeup capability */ + bool has_ccr; /* Transceiver has configuration control registers */ + int (*enable_st_clock)(unsigned int, bool); + int (*set_clk_src)(struct device *dev, struct clk *clk, const char *src); + int (*mux_signal)(struct device *dev, const char *signal, const char *src); }; struct omap_mcbsp_st_data { @@ -389,14 +341,12 @@ struct omap_mcbsp { spinlock_t lock; struct omap_mcbsp_platform_data *pdata; struct clk *fclk; -#ifdef CONFIG_ARCH_OMAP3 struct omap_mcbsp_st_data *st_data; int dma_op_mode; u16 max_tx_thres; u16 max_rx_thres; -#endif void *reg_cache; - unsigned int mcbsp_config_type; + int reg_cache_size; }; /** @@ -408,16 +358,10 @@ struct omap_mcbsp_dev_attr { }; extern struct omap_mcbsp **mcbsp_ptr; -extern int omap_mcbsp_count, omap_mcbsp_cache_size; - -#define omap_mcbsp_check_valid_id(id) (id < omap_mcbsp_count) -#define id_to_mcbsp_ptr(id) mcbsp_ptr[id]; +extern int omap_mcbsp_count; int omap_mcbsp_init(void); -void omap_mcbsp_register_board_cfg(struct resource *res, int res_count, - struct omap_mcbsp_platform_data *config, int size); void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config); -#ifdef CONFIG_ARCH_OMAP3 void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold); void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold); u16 omap_mcbsp_get_max_tx_threshold(unsigned int id); @@ -426,18 +370,6 @@ u16 omap_mcbsp_get_fifo_size(unsigned int id); u16 omap_mcbsp_get_tx_delay(unsigned int id); u16 omap_mcbsp_get_rx_delay(unsigned int id); int omap_mcbsp_get_dma_op_mode(unsigned int id); -#else -static inline void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold) -{ } -static inline void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold) -{ } -static inline u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) { return 0; } -static inline u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) { return 0; } -static inline u16 omap_mcbsp_get_fifo_size(unsigned int id) { return 0; } -static inline u16 omap_mcbsp_get_tx_delay(unsigned int id) { return 0; } -static inline u16 omap_mcbsp_get_rx_delay(unsigned int id) { return 0; } -static inline int omap_mcbsp_get_dma_op_mode(unsigned int id) { return 0; } -#endif int omap_mcbsp_request(unsigned int id); void omap_mcbsp_free(unsigned int id); void omap_mcbsp_start(unsigned int id, int tx, int rx); @@ -453,21 +385,11 @@ void omap2_mcbsp1_mux_fsr_src(u8 mux); int omap_mcbsp_dma_ch_params(unsigned int id, unsigned int stream); int omap_mcbsp_dma_reg_params(unsigned int id, unsigned int stream); -#ifdef CONFIG_ARCH_OMAP3 /* Sidetone specific API */ int omap_st_set_chgain(unsigned int id, int channel, s16 chgain); int omap_st_get_chgain(unsigned int id, int channel, s16 *chgain); int omap_st_enable(unsigned int id); int omap_st_disable(unsigned int id); int omap_st_is_enabled(unsigned int id); -#else -static inline int omap_st_set_chgain(unsigned int id, int channel, - s16 chgain) { return 0; } -static inline int omap_st_get_chgain(unsigned int id, int channel, - s16 *chgain) { return 0; } -static inline int omap_st_enable(unsigned int id) { return 0; } -static inline int omap_st_disable(unsigned int id) { return 0; } -static inline int omap_st_is_enabled(unsigned int id) { return 0; } -#endif #endif diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h index ee405b36df4..12c5b0c345b 100644 --- a/arch/arm/plat-omap/include/plat/omap_device.h +++ b/arch/arm/plat-omap/include/plat/omap_device.h @@ -68,7 +68,7 @@ extern struct device omap_device_parent; * */ struct omap_device { - struct platform_device pdev; + struct platform_device *pdev; struct omap_hwmod **hwmods; struct omap_device_pm_latency *pm_lats; u32 dev_wakeup_lat; @@ -88,25 +88,20 @@ int omap_device_shutdown(struct platform_device *pdev); /* Core code interface */ -int omap_device_count_resources(struct omap_device *od); -int omap_device_fill_resources(struct omap_device *od, struct resource *res); - -struct omap_device *omap_device_build(const char *pdev_name, int pdev_id, +struct platform_device *omap_device_build(const char *pdev_name, int pdev_id, struct omap_hwmod *oh, void *pdata, int pdata_len, struct omap_device_pm_latency *pm_lats, int pm_lats_cnt, int is_early_device); -struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id, +struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id, struct omap_hwmod **oh, int oh_cnt, void *pdata, int pdata_len, struct omap_device_pm_latency *pm_lats, int pm_lats_cnt, int is_early_device); -int omap_device_register(struct omap_device *od); -int omap_early_device_register(struct omap_device *od); - void __iomem *omap_device_get_rt_va(struct omap_device *od); +struct device *omap_device_get_by_hwmod_name(const char *oh_name); /* OMAP PM interface */ int omap_device_align_pm_lat(struct platform_device *pdev, @@ -122,11 +117,6 @@ int omap_device_enable_hwmods(struct omap_device *od); int omap_device_disable_clocks(struct omap_device *od); int omap_device_enable_clocks(struct omap_device *od); -static inline void omap_device_disable_idle_on_suspend(struct omap_device *od) -{ - od->flags |= OMAP_DEVICE_NO_IDLE_ON_SUSPEND; -} - /* * Entries should be kept in latency order ascending * @@ -157,6 +147,17 @@ struct omap_device_pm_latency { #define OMAP_DEVICE_LATENCY_AUTO_ADJUST BIT(1) /* Get omap_device pointer from platform_device pointer */ -#define to_omap_device(x) container_of((x), struct omap_device, pdev) +static inline struct omap_device *to_omap_device(struct platform_device *pdev) +{ + return pdev ? pdev->archdata.od : NULL; +} + +static inline +void omap_device_disable_idle_on_suspend(struct platform_device *pdev) +{ + struct omap_device *od = to_omap_device(pdev); + + od->flags |= OMAP_DEVICE_NO_IDLE_ON_SUSPEND; +} #endif diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 0e329ca88a7..5419f1a2aaa 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -496,7 +496,6 @@ struct omap_hwmod_class { * @_state: internal-use hwmod state * @_postsetup_state: internal-use state to leave the hwmod in after _setup() * @flags: hwmod flags (documented below) - * @omap_chip: OMAP chips this hwmod is present on * @_lock: spinlock serializing operations on this hwmod * @node: list node for hwmod list (internal use) * @@ -526,7 +525,6 @@ struct omap_hwmod { char *clkdm_name; struct clockdomain *clkdm; char *vdd_name; - struct voltagedomain *voltdm; struct omap_hwmod_ocp_if **masters; /* connect to *_IA */ struct omap_hwmod_ocp_if **slaves; /* connect to *_TA */ void *dev_attr; @@ -545,7 +543,6 @@ struct omap_hwmod { u8 _int_flags; u8 _state; u8 _postsetup_state; - const struct omap_chip_id omap_chip; }; int omap_hwmod_register(struct omap_hwmod **ohs); diff --git a/arch/arm/plat-omap/include/plat/voltage.h b/arch/arm/plat-omap/include/plat/voltage.h new file mode 100644 index 00000000000..0a6a482ec01 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/voltage.h @@ -0,0 +1,20 @@ +/* + * OMAP Voltage Management Routines + * + * Copyright (C) 2011, Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_OMAP_VOLTAGE_H +#define __ARCH_ARM_OMAP_VOLTAGE_H + +struct voltagedomain; + +struct voltagedomain *voltdm_lookup(const char *name); +int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt); +unsigned long voltdm_get_voltage(struct voltagedomain *voltdm); + +#endif diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c index e9b0e23edd0..333871f5999 100644 --- a/arch/arm/plat-omap/io.c +++ b/arch/arm/plat-omap/io.c @@ -24,11 +24,16 @@ #define BETWEEN(p,st,sz) ((p) >= (st) && (p) < ((st) + (sz))) #define XLATE(p,pst,vst) ((void __iomem *)((p) - (pst) + (vst))) +static int initialized; + /* * Intercept ioremap() requests for addresses in our fixed mapping regions. */ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type) { + + WARN(!initialized, "Do not use ioremap before init_early\n"); + #ifdef CONFIG_ARCH_OMAP1 if (cpu_class_is_omap1()) { if (BETWEEN(p, OMAP1_IO_PHYS, OMAP1_IO_SIZE)) @@ -147,3 +152,8 @@ void __init omap_init_consistent_dma_size(void) init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20); #endif } + +void __init omap_ioremap_init(void) +{ + initialized++; +} diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 6c62af10871..4b15cd7926d 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -24,45 +24,40 @@ #include <linux/slab.h> #include <plat/mcbsp.h> -#include <plat/omap_device.h> #include <linux/pm_runtime.h> -/* XXX These "sideways" includes are a sign that something is wrong */ -#include "../mach-omap2/cm2xxx_3xxx.h" -#include "../mach-omap2/cm-regbits-34xx.h" - struct omap_mcbsp **mcbsp_ptr; -int omap_mcbsp_count, omap_mcbsp_cache_size; +int omap_mcbsp_count; + +#define omap_mcbsp_check_valid_id(id) (id < omap_mcbsp_count) +#define id_to_mcbsp_ptr(id) mcbsp_ptr[id]; static void omap_mcbsp_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val) { - if (cpu_class_is_omap1()) { - ((u16 *)mcbsp->reg_cache)[reg / sizeof(u16)] = (u16)val; - __raw_writew((u16)val, mcbsp->io_base + reg); - } else if (cpu_is_omap2420()) { - ((u16 *)mcbsp->reg_cache)[reg / sizeof(u32)] = (u16)val; - __raw_writew((u16)val, mcbsp->io_base + reg); + void __iomem *addr = mcbsp->io_base + reg * mcbsp->pdata->reg_step; + + if (mcbsp->pdata->reg_size == 2) { + ((u16 *)mcbsp->reg_cache)[reg] = (u16)val; + __raw_writew((u16)val, addr); } else { - ((u32 *)mcbsp->reg_cache)[reg / sizeof(u32)] = val; - __raw_writel(val, mcbsp->io_base + reg); + ((u32 *)mcbsp->reg_cache)[reg] = val; + __raw_writel(val, addr); } } static int omap_mcbsp_read(struct omap_mcbsp *mcbsp, u16 reg, bool from_cache) { - if (cpu_class_is_omap1()) { - return !from_cache ? __raw_readw(mcbsp->io_base + reg) : - ((u16 *)mcbsp->reg_cache)[reg / sizeof(u16)]; - } else if (cpu_is_omap2420()) { - return !from_cache ? __raw_readw(mcbsp->io_base + reg) : - ((u16 *)mcbsp->reg_cache)[reg / sizeof(u32)]; + void __iomem *addr = mcbsp->io_base + reg * mcbsp->pdata->reg_step; + + if (mcbsp->pdata->reg_size == 2) { + return !from_cache ? __raw_readw(addr) : + ((u16 *)mcbsp->reg_cache)[reg]; } else { - return !from_cache ? __raw_readl(mcbsp->io_base + reg) : - ((u32 *)mcbsp->reg_cache)[reg / sizeof(u32)]; + return !from_cache ? __raw_readl(addr) : + ((u32 *)mcbsp->reg_cache)[reg]; } } -#ifdef CONFIG_ARCH_OMAP3 static void omap_mcbsp_st_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val) { __raw_writel(val, mcbsp->st_data->io_base_st + reg); @@ -72,7 +67,6 @@ static int omap_mcbsp_st_read(struct omap_mcbsp *mcbsp, u16 reg) { return __raw_readl(mcbsp->st_data->io_base_st + reg); } -#endif #define MCBSP_READ(mcbsp, reg) \ omap_mcbsp_read(mcbsp, OMAP_MCBSP_REG_##reg, 0) @@ -187,7 +181,7 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config) MCBSP_WRITE(mcbsp, MCR2, config->mcr2); MCBSP_WRITE(mcbsp, MCR1, config->mcr1); MCBSP_WRITE(mcbsp, PCR0, config->pcr0); - if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) { + if (mcbsp->pdata->has_ccr) { MCBSP_WRITE(mcbsp, XCCR, config->xccr); MCBSP_WRITE(mcbsp, RCCR, config->rccr); } @@ -239,46 +233,28 @@ int omap_mcbsp_dma_reg_params(unsigned int id, unsigned int stream) } mcbsp = id_to_mcbsp_ptr(id); - data_reg = mcbsp->phys_dma_base; - - if (mcbsp->mcbsp_config_type < MCBSP_CONFIG_TYPE2) { + if (mcbsp->pdata->reg_size == 2) { if (stream) - data_reg += OMAP_MCBSP_REG_DRR1; + data_reg = OMAP_MCBSP_REG_DRR1; else - data_reg += OMAP_MCBSP_REG_DXR1; + data_reg = OMAP_MCBSP_REG_DXR1; } else { if (stream) - data_reg += OMAP_MCBSP_REG_DRR; + data_reg = OMAP_MCBSP_REG_DRR; else - data_reg += OMAP_MCBSP_REG_DXR; + data_reg = OMAP_MCBSP_REG_DXR; } - return data_reg; + return mcbsp->phys_dma_base + data_reg * mcbsp->pdata->reg_step; } EXPORT_SYMBOL(omap_mcbsp_dma_reg_params); -#ifdef CONFIG_ARCH_OMAP3 -static struct omap_device *find_omap_device_by_dev(struct device *dev) -{ - struct platform_device *pdev = container_of(dev, - struct platform_device, dev); - return container_of(pdev, struct omap_device, pdev); -} - static void omap_st_on(struct omap_mcbsp *mcbsp) { unsigned int w; - struct omap_device *od; - od = find_omap_device_by_dev(mcbsp->dev); - - /* - * Sidetone uses McBSP ICLK - which must not idle when sidetones - * are enabled or sidetones start sounding ugly. - */ - w = omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE); - w &= ~(1 << (mcbsp->id - 2)); - omap2_cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE); + if (mcbsp->pdata->enable_st_clock) + mcbsp->pdata->enable_st_clock(mcbsp->id, 1); /* Enable McBSP Sidetone */ w = MCBSP_READ(mcbsp, SSELCR); @@ -292,9 +268,6 @@ static void omap_st_on(struct omap_mcbsp *mcbsp) static void omap_st_off(struct omap_mcbsp *mcbsp) { unsigned int w; - struct omap_device *od; - - od = find_omap_device_by_dev(mcbsp->dev); w = MCBSP_ST_READ(mcbsp, SSELCR); MCBSP_ST_WRITE(mcbsp, SSELCR, w & ~(ST_SIDETONEEN)); @@ -302,17 +275,13 @@ static void omap_st_off(struct omap_mcbsp *mcbsp) w = MCBSP_READ(mcbsp, SSELCR); MCBSP_WRITE(mcbsp, SSELCR, w & ~(SIDETONEEN)); - w = omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE); - w |= 1 << (mcbsp->id - 2); - omap2_cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE); + if (mcbsp->pdata->enable_st_clock) + mcbsp->pdata->enable_st_clock(mcbsp->id, 0); } static void omap_st_fir_write(struct omap_mcbsp *mcbsp, s16 *fir) { u16 val, i; - struct omap_device *od; - - od = find_omap_device_by_dev(mcbsp->dev); val = MCBSP_ST_READ(mcbsp, SSELCR); @@ -340,9 +309,6 @@ static void omap_st_chgain(struct omap_mcbsp *mcbsp) { u16 w; struct omap_mcbsp_st_data *st_data = mcbsp->st_data; - struct omap_device *od; - - od = find_omap_device_by_dev(mcbsp->dev); w = MCBSP_ST_READ(mcbsp, SSELCR); @@ -525,14 +491,13 @@ void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold) { struct omap_mcbsp *mcbsp; - if (!cpu_is_omap34xx() && !cpu_is_omap44xx()) - return; - if (!omap_mcbsp_check_valid_id(id)) { printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return; } mcbsp = id_to_mcbsp_ptr(id); + if (mcbsp->pdata->buffer_size == 0) + return; if (threshold && threshold <= mcbsp->max_tx_thres) MCBSP_WRITE(mcbsp, THRSH2, threshold - 1); @@ -548,14 +513,13 @@ void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold) { struct omap_mcbsp *mcbsp; - if (!cpu_is_omap34xx() && !cpu_is_omap44xx()) - return; - if (!omap_mcbsp_check_valid_id(id)) { printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return; } mcbsp = id_to_mcbsp_ptr(id); + if (mcbsp->pdata->buffer_size == 0) + return; if (threshold && threshold <= mcbsp->max_rx_thres) MCBSP_WRITE(mcbsp, THRSH1, threshold - 1); @@ -625,6 +589,8 @@ u16 omap_mcbsp_get_tx_delay(unsigned int id) return -ENODEV; } mcbsp = id_to_mcbsp_ptr(id); + if (mcbsp->pdata->buffer_size == 0) + return 0; /* Returns the number of free locations in the buffer */ buffstat = MCBSP_READ(mcbsp, XBUFFSTAT); @@ -648,6 +614,8 @@ u16 omap_mcbsp_get_rx_delay(unsigned int id) return -ENODEV; } mcbsp = id_to_mcbsp_ptr(id); + if (mcbsp->pdata->buffer_size == 0) + return 0; /* Returns the number of used locations in the buffer */ buffstat = MCBSP_READ(mcbsp, RBUFFSTAT); @@ -683,46 +651,6 @@ int omap_mcbsp_get_dma_op_mode(unsigned int id) } EXPORT_SYMBOL(omap_mcbsp_get_dma_op_mode); -static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp) -{ - struct omap_device *od; - - od = find_omap_device_by_dev(mcbsp->dev); - /* - * Enable wakup behavior, smart idle and all wakeups - * REVISIT: some wakeups may be unnecessary - */ - if (cpu_is_omap34xx() || cpu_is_omap44xx()) { - MCBSP_WRITE(mcbsp, WAKEUPEN, XRDYEN | RRDYEN); - } -} - -static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp) -{ - struct omap_device *od; - - od = find_omap_device_by_dev(mcbsp->dev); - - /* - * Disable wakup behavior, smart idle and all wakeups - */ - if (cpu_is_omap34xx() || cpu_is_omap44xx()) { - /* - * HW bug workaround - If no_idle mode is taken, we need to - * go to smart_idle before going to always_idle, or the - * device will not hit retention anymore. - */ - - MCBSP_WRITE(mcbsp, WAKEUPEN, 0); - } -} -#else -static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp) {} -static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp) {} -static inline void omap_st_start(struct omap_mcbsp *mcbsp) {} -static inline void omap_st_stop(struct omap_mcbsp *mcbsp) {} -#endif - int omap_mcbsp_request(unsigned int id) { struct omap_mcbsp *mcbsp; @@ -735,7 +663,7 @@ int omap_mcbsp_request(unsigned int id) } mcbsp = id_to_mcbsp_ptr(id); - reg_cache = kzalloc(omap_mcbsp_cache_size, GFP_KERNEL); + reg_cache = kzalloc(mcbsp->reg_cache_size, GFP_KERNEL); if (!reg_cache) { return -ENOMEM; } @@ -757,8 +685,9 @@ int omap_mcbsp_request(unsigned int id) pm_runtime_get_sync(mcbsp->dev); - /* Do procedure specific to omap34xx arch, if applicable */ - omap34xx_mcbsp_request(mcbsp); + /* Enable wakeup behavior */ + if (mcbsp->pdata->has_wakeup) + MCBSP_WRITE(mcbsp, WAKEUPEN, XRDYEN | RRDYEN); /* * Make sure that transmitter, receiver and sample-rate generator are @@ -795,8 +724,9 @@ err_clk_disable: if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free) mcbsp->pdata->ops->free(id); - /* Do procedure specific to omap34xx arch, if applicable */ - omap34xx_mcbsp_free(mcbsp); + /* Disable wakeup behavior */ + if (mcbsp->pdata->has_wakeup) + MCBSP_WRITE(mcbsp, WAKEUPEN, 0); pm_runtime_put_sync(mcbsp->dev); @@ -825,8 +755,9 @@ void omap_mcbsp_free(unsigned int id) if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free) mcbsp->pdata->ops->free(id); - /* Do procedure specific to omap34xx arch, if applicable */ - omap34xx_mcbsp_free(mcbsp); + /* Disable wakeup behavior */ + if (mcbsp->pdata->has_wakeup) + MCBSP_WRITE(mcbsp, WAKEUPEN, 0); pm_runtime_put_sync(mcbsp->dev); @@ -866,7 +797,7 @@ void omap_mcbsp_start(unsigned int id, int tx, int rx) } mcbsp = id_to_mcbsp_ptr(id); - if (cpu_is_omap34xx()) + if (mcbsp->st_data) omap_st_start(mcbsp); /* Only enable SRG, if McBSP is master */ @@ -904,7 +835,7 @@ void omap_mcbsp_start(unsigned int id, int tx, int rx) MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 7)); } - if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) { + if (mcbsp->pdata->has_ccr) { /* Release the transmitter and receiver */ w = MCBSP_READ_CACHE(mcbsp, XCCR); w &= ~(tx ? XDISABLE : 0); @@ -934,7 +865,7 @@ void omap_mcbsp_stop(unsigned int id, int tx, int rx) /* Reset transmitter */ tx &= 1; - if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) { + if (mcbsp->pdata->has_ccr) { w = MCBSP_READ_CACHE(mcbsp, XCCR); w |= (tx ? XDISABLE : 0); MCBSP_WRITE(mcbsp, XCCR, w); @@ -944,7 +875,7 @@ void omap_mcbsp_stop(unsigned int id, int tx, int rx) /* Reset receiver */ rx &= 1; - if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) { + if (mcbsp->pdata->has_ccr) { w = MCBSP_READ_CACHE(mcbsp, RCCR); w |= (rx ? RDISABLE : 0); MCBSP_WRITE(mcbsp, RCCR, w); @@ -961,39 +892,72 @@ void omap_mcbsp_stop(unsigned int id, int tx, int rx) MCBSP_WRITE(mcbsp, SPCR2, w & ~(1 << 6)); } - if (cpu_is_omap34xx()) + if (mcbsp->st_data) omap_st_stop(mcbsp); } EXPORT_SYMBOL(omap_mcbsp_stop); -/* - * The following functions are only required on an OMAP1-only build. - * mach-omap2/mcbsp.c contains the real functions - */ -#ifndef CONFIG_ARCH_OMAP2PLUS int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id) { - WARN(1, "%s: should never be called on an OMAP1-only kernel\n", - __func__); - return -EINVAL; + struct omap_mcbsp *mcbsp; + const char *src; + + if (!omap_mcbsp_check_valid_id(id)) { + pr_err("%s: Invalid id (%d)\n", __func__, id + 1); + return -EINVAL; + } + mcbsp = id_to_mcbsp_ptr(id); + + if (fck_src_id == MCBSP_CLKS_PAD_SRC) + src = "clks_ext"; + else if (fck_src_id == MCBSP_CLKS_PRCM_SRC) + src = "clks_fclk"; + else + return -EINVAL; + + if (mcbsp->pdata->set_clk_src) + return mcbsp->pdata->set_clk_src(mcbsp->dev, mcbsp->fclk, src); + else + return -EINVAL; } +EXPORT_SYMBOL(omap2_mcbsp_set_clks_src); void omap2_mcbsp1_mux_clkr_src(u8 mux) { - WARN(1, "%s: should never be called on an OMAP1-only kernel\n", - __func__); - return; + struct omap_mcbsp *mcbsp; + const char *src; + + if (mux == CLKR_SRC_CLKR) + src = "clkr"; + else if (mux == CLKR_SRC_CLKX) + src = "clkx"; + else + return; + + mcbsp = id_to_mcbsp_ptr(0); + if (mcbsp->pdata->mux_signal) + mcbsp->pdata->mux_signal(mcbsp->dev, "clkr", src); } +EXPORT_SYMBOL(omap2_mcbsp1_mux_clkr_src); void omap2_mcbsp1_mux_fsr_src(u8 mux) { - WARN(1, "%s: should never be called on an OMAP1-only kernel\n", - __func__); - return; + struct omap_mcbsp *mcbsp; + const char *src; + + if (mux == FSR_SRC_FSR) + src = "fsr"; + else if (mux == FSR_SRC_FSX) + src = "fsx"; + else + return; + + mcbsp = id_to_mcbsp_ptr(0); + if (mcbsp->pdata->mux_signal) + mcbsp->pdata->mux_signal(mcbsp->dev, "fsr", src); } -#endif +EXPORT_SYMBOL(omap2_mcbsp1_mux_fsr_src); -#ifdef CONFIG_ARCH_OMAP3 #define max_thres(m) (mcbsp->pdata->buffer_size) #define valid_threshold(m, val) ((val) <= max_thres(m)) #define THRESHOLD_PROP_BUILDER(prop) \ @@ -1084,6 +1048,17 @@ unlock: static DEVICE_ATTR(dma_op_mode, 0644, dma_op_mode_show, dma_op_mode_store); +static const struct attribute *additional_attrs[] = { + &dev_attr_max_tx_thres.attr, + &dev_attr_max_rx_thres.attr, + &dev_attr_dma_op_mode.attr, + NULL, +}; + +static const struct attribute_group additional_attr_group = { + .attrs = (struct attribute **)additional_attrs, +}; + static ssize_t st_taps_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -1142,27 +1117,6 @@ out: static DEVICE_ATTR(st_taps, 0644, st_taps_show, st_taps_store); -static const struct attribute *additional_attrs[] = { - &dev_attr_max_tx_thres.attr, - &dev_attr_max_rx_thres.attr, - &dev_attr_dma_op_mode.attr, - NULL, -}; - -static const struct attribute_group additional_attr_group = { - .attrs = (struct attribute **)additional_attrs, -}; - -static inline int __devinit omap_additional_add(struct device *dev) -{ - return sysfs_create_group(&dev->kobj, &additional_attr_group); -} - -static inline void __devexit omap_additional_remove(struct device *dev) -{ - sysfs_remove_group(&dev->kobj, &additional_attr_group); -} - static const struct attribute *sidetone_attrs[] = { &dev_attr_st_taps.attr, NULL, @@ -1172,10 +1126,9 @@ static const struct attribute_group sidetone_attr_group = { .attrs = (struct attribute **)sidetone_attrs, }; -static int __devinit omap_st_add(struct omap_mcbsp *mcbsp) +static int __devinit omap_st_add(struct omap_mcbsp *mcbsp, + struct resource *res) { - struct platform_device *pdev; - struct resource *res; struct omap_mcbsp_st_data *st_data; int err; @@ -1185,9 +1138,6 @@ static int __devinit omap_st_add(struct omap_mcbsp *mcbsp) goto err1; } - pdev = container_of(mcbsp->dev, struct platform_device, dev); - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sidetone"); st_data->io_base_st = ioremap(res->start, resource_size(res)); if (!st_data->io_base_st) { err = -ENOMEM; @@ -1214,59 +1164,10 @@ static void __devexit omap_st_remove(struct omap_mcbsp *mcbsp) { struct omap_mcbsp_st_data *st_data = mcbsp->st_data; - if (st_data) { - sysfs_remove_group(&mcbsp->dev->kobj, &sidetone_attr_group); - iounmap(st_data->io_base_st); - kfree(st_data); - } -} - -static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) -{ - mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT; - if (cpu_is_omap34xx()) { - /* - * Initially configure the maximum thresholds to a safe value. - * The McBSP FIFO usage with these values should not go under - * 16 locations. - * If the whole FIFO without safety buffer is used, than there - * is a possibility that the DMA will be not able to push the - * new data on time, causing channel shifts in runtime. - */ - mcbsp->max_tx_thres = max_thres(mcbsp) - 0x10; - mcbsp->max_rx_thres = max_thres(mcbsp) - 0x10; - /* - * REVISIT: Set dmap_op_mode to THRESHOLD as default - * for mcbsp2 instances. - */ - if (omap_additional_add(mcbsp->dev)) - dev_warn(mcbsp->dev, - "Unable to create additional controls\n"); - - if (mcbsp->id == 2 || mcbsp->id == 3) - if (omap_st_add(mcbsp)) - dev_warn(mcbsp->dev, - "Unable to create sidetone controls\n"); - - } else { - mcbsp->max_tx_thres = -EINVAL; - mcbsp->max_rx_thres = -EINVAL; - } -} - -static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp) -{ - if (cpu_is_omap34xx()) { - omap_additional_remove(mcbsp->dev); - - if (mcbsp->id == 2 || mcbsp->id == 3) - omap_st_remove(mcbsp); - } + sysfs_remove_group(&mcbsp->dev->kobj, &sidetone_attr_group); + iounmap(st_data->io_base_st); + kfree(st_data); } -#else -static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) {} -static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp) {} -#endif /* CONFIG_ARCH_OMAP3 */ /* * McBSP1 and McBSP3 are directly mapped on 1610 and 1510. @@ -1316,7 +1217,7 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev) } } mcbsp->phys_base = res->start; - omap_mcbsp_cache_size = resource_size(res); + mcbsp->reg_cache_size = resource_size(res); mcbsp->io_base = ioremap(res->start, resource_size(res)); if (!mcbsp->io_base) { ret = -ENOMEM; @@ -1364,15 +1265,52 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev) mcbsp->pdata = pdata; mcbsp->dev = &pdev->dev; mcbsp_ptr[id] = mcbsp; - mcbsp->mcbsp_config_type = pdata->mcbsp_config_type; platform_set_drvdata(pdev, mcbsp); pm_runtime_enable(mcbsp->dev); - /* Initialize mcbsp properties for OMAP34XX if needed / applicable */ - omap34xx_device_init(mcbsp); + mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT; + if (mcbsp->pdata->buffer_size) { + /* + * Initially configure the maximum thresholds to a safe value. + * The McBSP FIFO usage with these values should not go under + * 16 locations. + * If the whole FIFO without safety buffer is used, than there + * is a possibility that the DMA will be not able to push the + * new data on time, causing channel shifts in runtime. + */ + mcbsp->max_tx_thres = max_thres(mcbsp) - 0x10; + mcbsp->max_rx_thres = max_thres(mcbsp) - 0x10; + + ret = sysfs_create_group(&mcbsp->dev->kobj, + &additional_attr_group); + if (ret) { + dev_err(mcbsp->dev, + "Unable to create additional controls\n"); + goto err_thres; + } + } else { + mcbsp->max_tx_thres = -EINVAL; + mcbsp->max_rx_thres = -EINVAL; + } + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sidetone"); + if (res) { + ret = omap_st_add(mcbsp, res); + if (ret) { + dev_err(mcbsp->dev, + "Unable to create sidetone controls\n"); + goto err_st; + } + } return 0; +err_st: + if (mcbsp->pdata->buffer_size) + sysfs_remove_group(&mcbsp->dev->kobj, + &additional_attr_group); +err_thres: + clk_put(mcbsp->fclk); err_res: iounmap(mcbsp->io_base); err_ioremap: @@ -1392,7 +1330,12 @@ static int __devexit omap_mcbsp_remove(struct platform_device *pdev) mcbsp->pdata->ops->free) mcbsp->pdata->ops->free(mcbsp->id); - omap34xx_device_exit(mcbsp); + if (mcbsp->pdata->buffer_size) + sysfs_remove_group(&mcbsp->dev->kobj, + &additional_attr_group); + + if (mcbsp->st_data) + omap_st_remove(mcbsp); clk_put(mcbsp->fclk); diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index b6b40974495..cd90bedd930 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -85,6 +85,8 @@ #include <linux/clk.h> #include <linux/clkdev.h> #include <linux/pm_runtime.h> +#include <linux/of.h> +#include <linux/notifier.h> #include <plat/omap_device.h> #include <plat/omap_hwmod.h> @@ -94,6 +96,23 @@ #define USE_WAKEUP_LAT 0 #define IGNORE_WAKEUP_LAT 1 +static int omap_device_register(struct platform_device *pdev); +static int omap_early_device_register(struct platform_device *pdev); +static struct omap_device *omap_device_alloc(struct platform_device *pdev, + struct omap_hwmod **ohs, int oh_cnt, + struct omap_device_pm_latency *pm_lats, + int pm_lats_cnt); +static void omap_device_delete(struct omap_device *od); + + +static struct omap_device_pm_latency omap_default_latency[] = { + { + .deactivate_func = omap_device_idle_hwmods, + .activate_func = omap_device_enable_hwmods, + .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, + } +}; + /* Private functions */ /** @@ -114,7 +133,7 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat) { struct timespec a, b, c; - pr_debug("omap_device: %s: activating\n", od->pdev.name); + dev_dbg(&od->pdev->dev, "omap_device: activating\n"); while (od->pm_lat_level > 0) { struct omap_device_pm_latency *odpl; @@ -138,25 +157,24 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat) c = timespec_sub(b, a); act_lat = timespec_to_ns(&c); - pr_debug("omap_device: %s: pm_lat %d: activate: elapsed time " - "%llu nsec\n", od->pdev.name, od->pm_lat_level, - act_lat); + dev_dbg(&od->pdev->dev, + "omap_device: pm_lat %d: activate: elapsed time " + "%llu nsec\n", od->pm_lat_level, act_lat); if (act_lat > odpl->activate_lat) { odpl->activate_lat_worst = act_lat; if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) { odpl->activate_lat = act_lat; - pr_warning("omap_device: %s.%d: new worst case " - "activate latency %d: %llu\n", - od->pdev.name, od->pdev.id, - od->pm_lat_level, act_lat); + dev_dbg(&od->pdev->dev, + "new worst case activate latency " + "%d: %llu\n", + od->pm_lat_level, act_lat); } else - pr_warning("omap_device: %s.%d: activate " - "latency %d higher than exptected. " - "(%llu > %d)\n", - od->pdev.name, od->pdev.id, - od->pm_lat_level, act_lat, - odpl->activate_lat); + dev_warn(&od->pdev->dev, + "activate latency %d " + "higher than exptected. (%llu > %d)\n", + od->pm_lat_level, act_lat, + odpl->activate_lat); } od->dev_wakeup_lat -= odpl->activate_lat; @@ -183,7 +201,7 @@ static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat) { struct timespec a, b, c; - pr_debug("omap_device: %s: deactivating\n", od->pdev.name); + dev_dbg(&od->pdev->dev, "omap_device: deactivating\n"); while (od->pm_lat_level < od->pm_lats_cnt) { struct omap_device_pm_latency *odpl; @@ -206,28 +224,26 @@ static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat) c = timespec_sub(b, a); deact_lat = timespec_to_ns(&c); - pr_debug("omap_device: %s: pm_lat %d: deactivate: elapsed time " - "%llu nsec\n", od->pdev.name, od->pm_lat_level, - deact_lat); + dev_dbg(&od->pdev->dev, + "omap_device: pm_lat %d: deactivate: elapsed time " + "%llu nsec\n", od->pm_lat_level, deact_lat); if (deact_lat > odpl->deactivate_lat) { odpl->deactivate_lat_worst = deact_lat; if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) { odpl->deactivate_lat = deact_lat; - pr_warning("omap_device: %s.%d: new worst case " - "deactivate latency %d: %llu\n", - od->pdev.name, od->pdev.id, - od->pm_lat_level, deact_lat); + dev_dbg(&od->pdev->dev, + "new worst case deactivate latency " + "%d: %llu\n", + od->pm_lat_level, deact_lat); } else - pr_warning("omap_device: %s.%d: deactivate " - "latency %d higher than exptected. " - "(%llu > %d)\n", - od->pdev.name, od->pdev.id, - od->pm_lat_level, deact_lat, - odpl->deactivate_lat); + dev_warn(&od->pdev->dev, + "deactivate latency %d " + "higher than exptected. (%llu > %d)\n", + od->pm_lat_level, deact_lat, + odpl->deactivate_lat); } - od->dev_wakeup_lat += odpl->activate_lat; od->pm_lat_level++; @@ -245,28 +261,27 @@ static void _add_clkdev(struct omap_device *od, const char *clk_alias, if (!clk_alias || !clk_name) return; - pr_debug("omap_device: %s: Creating %s -> %s\n", - dev_name(&od->pdev.dev), clk_alias, clk_name); + dev_dbg(&od->pdev->dev, "Creating %s -> %s\n", clk_alias, clk_name); - r = clk_get_sys(dev_name(&od->pdev.dev), clk_alias); + r = clk_get_sys(dev_name(&od->pdev->dev), clk_alias); if (!IS_ERR(r)) { - pr_warning("omap_device: %s: alias %s already exists\n", - dev_name(&od->pdev.dev), clk_alias); + dev_warn(&od->pdev->dev, + "alias %s already exists\n", clk_alias); clk_put(r); return; } r = omap_clk_get_by_name(clk_name); if (IS_ERR(r)) { - pr_err("omap_device: %s: omap_clk_get_by_name for %s failed\n", - dev_name(&od->pdev.dev), clk_name); + dev_err(&od->pdev->dev, + "omap_clk_get_by_name for %s failed\n", clk_name); return; } - l = clkdev_alloc(r, clk_alias, dev_name(&od->pdev.dev)); + l = clkdev_alloc(r, clk_alias, dev_name(&od->pdev->dev)); if (!l) { - pr_err("omap_device: %s: clkdev_alloc for %s failed\n", - dev_name(&od->pdev.dev), clk_alias); + dev_err(&od->pdev->dev, + "clkdev_alloc for %s failed\n", clk_alias); return; } @@ -304,6 +319,96 @@ static void _add_hwmod_clocks_clkdev(struct omap_device *od, } +static struct dev_pm_domain omap_device_pm_domain; + +/** + * omap_device_build_from_dt - build an omap_device with multiple hwmods + * @pdev_name: name of the platform_device driver to use + * @pdev_id: this platform_device's connection ID + * @oh: ptr to the single omap_hwmod that backs this omap_device + * @pdata: platform_data ptr to associate with the platform_device + * @pdata_len: amount of memory pointed to by @pdata + * @pm_lats: pointer to a omap_device_pm_latency array for this device + * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats + * @is_early_device: should the device be registered as an early device or not + * + * Function for building an omap_device already registered from device-tree + * + * Returns 0 or PTR_ERR() on error. + */ +static int omap_device_build_from_dt(struct platform_device *pdev) +{ + struct omap_hwmod **hwmods; + struct omap_device *od; + struct omap_hwmod *oh; + struct device_node *node = pdev->dev.of_node; + const char *oh_name; + int oh_cnt, i, ret = 0; + + oh_cnt = of_property_count_strings(node, "ti,hwmods"); + if (!oh_cnt || IS_ERR_VALUE(oh_cnt)) { + dev_warn(&pdev->dev, "No 'hwmods' to build omap_device\n"); + return -ENODEV; + } + + hwmods = kzalloc(sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL); + if (!hwmods) { + ret = -ENOMEM; + goto odbfd_exit; + } + + for (i = 0; i < oh_cnt; i++) { + of_property_read_string_index(node, "ti,hwmods", i, &oh_name); + oh = omap_hwmod_lookup(oh_name); + if (!oh) { + dev_err(&pdev->dev, "Cannot lookup hwmod '%s'\n", + oh_name); + ret = -EINVAL; + goto odbfd_exit1; + } + hwmods[i] = oh; + } + + od = omap_device_alloc(pdev, hwmods, oh_cnt, NULL, 0); + if (!od) { + dev_err(&pdev->dev, "Cannot allocate omap_device for :%s\n", + oh_name); + ret = PTR_ERR(od); + goto odbfd_exit1; + } + + if (of_get_property(node, "ti,no_idle_on_suspend", NULL)) + omap_device_disable_idle_on_suspend(pdev); + + pdev->dev.pm_domain = &omap_device_pm_domain; + +odbfd_exit1: + kfree(hwmods); +odbfd_exit: + return ret; +} + +static int _omap_device_notifier_call(struct notifier_block *nb, + unsigned long event, void *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + + switch (event) { + case BUS_NOTIFY_ADD_DEVICE: + if (pdev->dev.of_node) + omap_device_build_from_dt(pdev); + break; + + case BUS_NOTIFY_DEL_DEVICE: + if (pdev->archdata.od) + omap_device_delete(pdev->archdata.od); + break; + } + + return NOTIFY_DONE; +} + + /* Public functions for use by core code */ /** @@ -343,7 +448,7 @@ u32 omap_device_get_context_loss_count(struct platform_device *pdev) * much memory to allocate before calling * omap_device_fill_resources(). Returns the count. */ -int omap_device_count_resources(struct omap_device *od) +static int omap_device_count_resources(struct omap_device *od) { int c = 0; int i; @@ -352,7 +457,7 @@ int omap_device_count_resources(struct omap_device *od) c += omap_hwmod_count_resources(od->hwmods[i]); pr_debug("omap_device: %s: counted %d total resources across %d " - "hwmods\n", od->pdev.name, c, od->hwmods_cnt); + "hwmods\n", od->pdev->name, c, od->hwmods_cnt); return c; } @@ -374,7 +479,8 @@ int omap_device_count_resources(struct omap_device *od) * functions to get device resources. Hacking around the existing * platform_device code wastes memory. Returns 0. */ -int omap_device_fill_resources(struct omap_device *od, struct resource *res) +static int omap_device_fill_resources(struct omap_device *od, + struct resource *res) { int c = 0; int i, r; @@ -389,6 +495,113 @@ int omap_device_fill_resources(struct omap_device *od, struct resource *res) } /** + * omap_device_alloc - allocate an omap_device + * @pdev: platform_device that will be included in this omap_device + * @oh: ptr to the single omap_hwmod that backs this omap_device + * @pdata: platform_data ptr to associate with the platform_device + * @pdata_len: amount of memory pointed to by @pdata + * @pm_lats: pointer to a omap_device_pm_latency array for this device + * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats + * + * Convenience function for allocating an omap_device structure and filling + * hwmods, resources and pm_latency attributes. + * + * Returns an struct omap_device pointer or ERR_PTR() on error; + */ +static struct omap_device *omap_device_alloc(struct platform_device *pdev, + struct omap_hwmod **ohs, int oh_cnt, + struct omap_device_pm_latency *pm_lats, + int pm_lats_cnt) +{ + int ret = -ENOMEM; + struct omap_device *od; + struct resource *res = NULL; + int i, res_count; + struct omap_hwmod **hwmods; + + od = kzalloc(sizeof(struct omap_device), GFP_KERNEL); + if (!od) { + ret = -ENOMEM; + goto oda_exit1; + } + od->hwmods_cnt = oh_cnt; + + hwmods = kmemdup(ohs, sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL); + if (!hwmods) + goto oda_exit2; + + od->hwmods = hwmods; + od->pdev = pdev; + + /* + * HACK: Ideally the resources from DT should match, and hwmod + * should just add the missing ones. Since the name is not + * properly populated by DT, stick to hwmod resources only. + */ + if (pdev->num_resources && pdev->resource) + dev_warn(&pdev->dev, "%s(): resources already allocated %d\n", + __func__, pdev->num_resources); + + res_count = omap_device_count_resources(od); + if (res_count > 0) { + dev_dbg(&pdev->dev, "%s(): resources allocated from hwmod %d\n", + __func__, res_count); + res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL); + if (!res) + goto oda_exit3; + + omap_device_fill_resources(od, res); + + ret = platform_device_add_resources(pdev, res, res_count); + kfree(res); + + if (ret) + goto oda_exit3; + } + + if (!pm_lats) { + pm_lats = omap_default_latency; + pm_lats_cnt = ARRAY_SIZE(omap_default_latency); + } + + od->pm_lats_cnt = pm_lats_cnt; + od->pm_lats = kmemdup(pm_lats, + sizeof(struct omap_device_pm_latency) * pm_lats_cnt, + GFP_KERNEL); + if (!od->pm_lats) + goto oda_exit3; + + pdev->archdata.od = od; + + for (i = 0; i < oh_cnt; i++) { + hwmods[i]->od = od; + _add_hwmod_clocks_clkdev(od, hwmods[i]); + } + + return od; + +oda_exit3: + kfree(hwmods); +oda_exit2: + kfree(od); +oda_exit1: + dev_err(&pdev->dev, "omap_device: build failed (%d)\n", ret); + + return ERR_PTR(ret); +} + +static void omap_device_delete(struct omap_device *od) +{ + if (!od) + return; + + od->pdev->archdata.od = NULL; + kfree(od->pm_lats); + kfree(od->hwmods); + kfree(od); +} + +/** * omap_device_build - build and register an omap_device with one omap_hwmod * @pdev_name: name of the platform_device driver to use * @pdev_id: this platform_device's connection ID @@ -405,7 +618,7 @@ int omap_device_fill_resources(struct omap_device *od, struct resource *res) * information. Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise, * passes along the return value of omap_device_build_ss(). */ -struct omap_device *omap_device_build(const char *pdev_name, int pdev_id, +struct platform_device *omap_device_build(const char *pdev_name, int pdev_id, struct omap_hwmod *oh, void *pdata, int pdata_len, struct omap_device_pm_latency *pm_lats, @@ -438,18 +651,15 @@ struct omap_device *omap_device_build(const char *pdev_name, int pdev_id, * platform_device record. Returns an ERR_PTR() on error, or passes * along the return value of omap_device_register(). */ -struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id, +struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id, struct omap_hwmod **ohs, int oh_cnt, void *pdata, int pdata_len, struct omap_device_pm_latency *pm_lats, int pm_lats_cnt, int is_early_device) { int ret = -ENOMEM; + struct platform_device *pdev; struct omap_device *od; - char *pdev_name2; - struct resource *res = NULL; - int i, res_count; - struct omap_hwmod **hwmods; if (!ohs || oh_cnt == 0 || !pdev_name) return ERR_PTR(-EINVAL); @@ -457,72 +667,40 @@ struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id, if (!pdata && pdata_len > 0) return ERR_PTR(-EINVAL); - pr_debug("omap_device: %s: building with %d hwmods\n", pdev_name, - oh_cnt); - - od = kzalloc(sizeof(struct omap_device), GFP_KERNEL); - if (!od) - return ERR_PTR(-ENOMEM); + pdev = platform_device_alloc(pdev_name, pdev_id); + if (!pdev) { + ret = -ENOMEM; + goto odbs_exit; + } - od->hwmods_cnt = oh_cnt; + /* Set the dev_name early to allow dev_xxx in omap_device_alloc */ + if (pdev->id != -1) + dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id); + else + dev_set_name(&pdev->dev, "%s", pdev->name); - hwmods = kzalloc(sizeof(struct omap_hwmod *) * oh_cnt, - GFP_KERNEL); - if (!hwmods) + od = omap_device_alloc(pdev, ohs, oh_cnt, pm_lats, pm_lats_cnt); + if (!od) goto odbs_exit1; - memcpy(hwmods, ohs, sizeof(struct omap_hwmod *) * oh_cnt); - od->hwmods = hwmods; - - pdev_name2 = kzalloc(strlen(pdev_name) + 1, GFP_KERNEL); - if (!pdev_name2) - goto odbs_exit2; - strcpy(pdev_name2, pdev_name); - - od->pdev.name = pdev_name2; - od->pdev.id = pdev_id; - - res_count = omap_device_count_resources(od); - if (res_count > 0) { - res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL); - if (!res) - goto odbs_exit3; - } - omap_device_fill_resources(od, res); - - od->pdev.num_resources = res_count; - od->pdev.resource = res; - - ret = platform_device_add_data(&od->pdev, pdata, pdata_len); + ret = platform_device_add_data(pdev, pdata, pdata_len); if (ret) - goto odbs_exit4; - - od->pm_lats = pm_lats; - od->pm_lats_cnt = pm_lats_cnt; + goto odbs_exit2; if (is_early_device) - ret = omap_early_device_register(od); + ret = omap_early_device_register(pdev); else - ret = omap_device_register(od); - - for (i = 0; i < oh_cnt; i++) { - hwmods[i]->od = od; - _add_hwmod_clocks_clkdev(od, hwmods[i]); - } - + ret = omap_device_register(pdev); if (ret) - goto odbs_exit4; + goto odbs_exit2; - return od; + return pdev; -odbs_exit4: - kfree(res); -odbs_exit3: - kfree(pdev_name2); odbs_exit2: - kfree(hwmods); + omap_device_delete(od); odbs_exit1: - kfree(od); + platform_device_put(pdev); +odbs_exit: pr_err("omap_device: %s: build failed (%d)\n", pdev_name, ret); @@ -538,11 +716,11 @@ odbs_exit1: * platform_early_add_device() on the underlying platform_device. * Returns 0 by default. */ -int omap_early_device_register(struct omap_device *od) +static int omap_early_device_register(struct platform_device *pdev) { struct platform_device *devices[1]; - devices[0] = &(od->pdev); + devices[0] = pdev; early_platform_add_devices(devices, 1); return 0; } @@ -615,6 +793,9 @@ static int _od_resume_noirq(struct device *dev) return pm_generic_resume_noirq(dev); } +#else +#define _od_suspend_noirq NULL +#define _od_resume_noirq NULL #endif static struct dev_pm_domain omap_device_pm_domain = { @@ -622,7 +803,8 @@ static struct dev_pm_domain omap_device_pm_domain = { SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume, _od_runtime_idle) USE_PLATFORM_PM_SLEEP_OPS - SET_SYSTEM_SLEEP_PM_OPS(_od_suspend_noirq, _od_resume_noirq) + .suspend_noirq = _od_suspend_noirq, + .resume_noirq = _od_resume_noirq, } }; @@ -634,13 +816,13 @@ static struct dev_pm_domain omap_device_pm_domain = { * platform_device_register() on the underlying platform_device. * Returns the return value of platform_device_register(). */ -int omap_device_register(struct omap_device *od) +static int omap_device_register(struct platform_device *pdev) { - pr_debug("omap_device: %s: registering\n", od->pdev.name); + pr_debug("omap_device: %s: registering\n", pdev->name); - od->pdev.dev.parent = &omap_device_parent; - od->pdev.dev.pm_domain = &omap_device_pm_domain; - return platform_device_register(&od->pdev); + pdev->dev.parent = &omap_device_parent; + pdev->dev.pm_domain = &omap_device_pm_domain; + return platform_device_add(pdev); } @@ -667,8 +849,9 @@ int omap_device_enable(struct platform_device *pdev) od = to_omap_device(pdev); if (od->_state == OMAP_DEVICE_STATE_ENABLED) { - WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n", - od->pdev.name, od->pdev.id, __func__, od->_state); + dev_warn(&pdev->dev, + "omap_device: %s() called from invalid state %d\n", + __func__, od->_state); return -EINVAL; } @@ -706,8 +889,9 @@ int omap_device_idle(struct platform_device *pdev) od = to_omap_device(pdev); if (od->_state != OMAP_DEVICE_STATE_ENABLED) { - WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n", - od->pdev.name, od->pdev.id, __func__, od->_state); + dev_warn(&pdev->dev, + "omap_device: %s() called from invalid state %d\n", + __func__, od->_state); return -EINVAL; } @@ -738,8 +922,9 @@ int omap_device_shutdown(struct platform_device *pdev) if (od->_state != OMAP_DEVICE_STATE_ENABLED && od->_state != OMAP_DEVICE_STATE_IDLE) { - WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n", - od->pdev.name, od->pdev.id, __func__, od->_state); + dev_warn(&pdev->dev, + "omap_device: %s() called from invalid state %d\n", + __func__, od->_state); return -EINVAL; } @@ -833,6 +1018,42 @@ void __iomem *omap_device_get_rt_va(struct omap_device *od) return omap_hwmod_get_mpu_rt_va(od->hwmods[0]); } +/** + * omap_device_get_by_hwmod_name() - convert a hwmod name to + * device pointer. + * @oh_name: name of the hwmod device + * + * Returns back a struct device * pointer associated with a hwmod + * device represented by a hwmod_name + */ +struct device *omap_device_get_by_hwmod_name(const char *oh_name) +{ + struct omap_hwmod *oh; + + if (!oh_name) { + WARN(1, "%s: no hwmod name!\n", __func__); + return ERR_PTR(-EINVAL); + } + + oh = omap_hwmod_lookup(oh_name); + if (IS_ERR_OR_NULL(oh)) { + WARN(1, "%s: no hwmod for %s\n", __func__, + oh_name); + return ERR_PTR(oh ? PTR_ERR(oh) : -ENODEV); + } + if (IS_ERR_OR_NULL(oh->od)) { + WARN(1, "%s: no omap_device for %s\n", __func__, + oh_name); + return ERR_PTR(oh->od ? PTR_ERR(oh->od) : -ENODEV); + } + + if (IS_ERR_OR_NULL(oh->od->pdev)) + return ERR_PTR(oh->od->pdev ? PTR_ERR(oh->od->pdev) : -ENODEV); + + return &oh->od->pdev->dev; +} +EXPORT_SYMBOL(omap_device_get_by_hwmod_name); + /* * Public functions intended for use in omap_device_pm_latency * .activate_func and .deactivate_func function pointers @@ -913,8 +1134,13 @@ struct device omap_device_parent = { .parent = &platform_bus, }; +static struct notifier_block platform_nb = { + .notifier_call = _omap_device_notifier_call, +}; + static int __init omap_device_init(void) { + bus_register_notifier(&platform_bus_type, &platform_nb); return device_register(&omap_device_parent); } core_initcall(omap_device_init); diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 363c91e44ef..8b28664d1c6 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -19,7 +19,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> -#include <linux/omapfb.h> #include <asm/tlb.h> #include <asm/cacheflush.h> @@ -29,10 +28,8 @@ #include <plat/sram.h> #include <plat/board.h> #include <plat/cpu.h> -#include <plat/vram.h> #include "sram.h" -#include "fb.h" /* XXX These "sideways" includes are a sign that something is wrong */ #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) @@ -41,16 +38,9 @@ #endif #define OMAP1_SRAM_PA 0x20000000 -#define OMAP1_SRAM_VA VMALLOC_END #define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800) -#define OMAP2_SRAM_VA 0xfe400000 -#define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800) -#define OMAP3_SRAM_VA 0xfe400000 #define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000) -#define OMAP3_SRAM_PUB_VA (OMAP3_SRAM_VA + 0x8000) -#define OMAP4_SRAM_VA 0xfe400000 #define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000) -#define OMAP4_SRAM_PUB_VA (OMAP4_SRAM_VA + 0x4000) #if defined(CONFIG_ARCH_OMAP2PLUS) #define SRAM_BOOTLOADER_SZ 0x00 @@ -73,9 +63,9 @@ #define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1))) static unsigned long omap_sram_start; -static unsigned long omap_sram_base; +static void __iomem *omap_sram_base; static unsigned long omap_sram_size; -static unsigned long omap_sram_ceil; +static void __iomem *omap_sram_ceil; /* * Depending on the target RAMFS firewall setup, the public usable amount of @@ -112,12 +102,9 @@ static int is_sram_locked(void) */ static void __init omap_detect_sram(void) { - unsigned long reserved; - if (cpu_class_is_omap2()) { if (is_sram_locked()) { if (cpu_is_omap34xx()) { - omap_sram_base = OMAP3_SRAM_PUB_VA; omap_sram_start = OMAP3_SRAM_PUB_PA; if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) || (omap_type() == OMAP2_DEVICE_TYPE_SEC)) { @@ -126,25 +113,20 @@ static void __init omap_detect_sram(void) omap_sram_size = 0x8000; /* 32K */ } } else if (cpu_is_omap44xx()) { - omap_sram_base = OMAP4_SRAM_PUB_VA; omap_sram_start = OMAP4_SRAM_PUB_PA; omap_sram_size = 0xa000; /* 40K */ } else { - omap_sram_base = OMAP2_SRAM_PUB_VA; omap_sram_start = OMAP2_SRAM_PUB_PA; omap_sram_size = 0x800; /* 2K */ } } else { if (cpu_is_omap34xx()) { - omap_sram_base = OMAP3_SRAM_VA; omap_sram_start = OMAP3_SRAM_PA; omap_sram_size = 0x10000; /* 64K */ } else if (cpu_is_omap44xx()) { - omap_sram_base = OMAP4_SRAM_VA; omap_sram_start = OMAP4_SRAM_PA; omap_sram_size = 0xe000; /* 56K */ } else { - omap_sram_base = OMAP2_SRAM_VA; omap_sram_start = OMAP2_SRAM_PA; if (cpu_is_omap242x()) omap_sram_size = 0xa0000; /* 640K */ @@ -153,7 +135,6 @@ static void __init omap_detect_sram(void) } } } else { - omap_sram_base = OMAP1_SRAM_VA; omap_sram_start = OMAP1_SRAM_PA; if (cpu_is_omap7xx()) @@ -170,35 +151,14 @@ static void __init omap_detect_sram(void) omap_sram_size = 0x4000; } } - reserved = omapfb_reserve_sram(omap_sram_start, omap_sram_base, - omap_sram_size, - omap_sram_start + SRAM_BOOTLOADER_SZ, - omap_sram_size - SRAM_BOOTLOADER_SZ); - omap_sram_size -= reserved; - - reserved = omap_vram_reserve_sram(omap_sram_start, omap_sram_base, - omap_sram_size, - omap_sram_start + SRAM_BOOTLOADER_SZ, - omap_sram_size - SRAM_BOOTLOADER_SZ); - omap_sram_size -= reserved; - - omap_sram_ceil = omap_sram_base + omap_sram_size; } -static struct map_desc omap_sram_io_desc[] __initdata = { - { /* .length gets filled in at runtime */ - .virtual = OMAP1_SRAM_VA, - .pfn = __phys_to_pfn(OMAP1_SRAM_PA), - .type = MT_MEMORY - } -}; - /* * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early. */ static void __init omap_map_sram(void) { - unsigned long base; + int cached = 1; if (omap_sram_size == 0) return; @@ -211,28 +171,18 @@ static void __init omap_map_sram(void) * the ARM may attempt to write cache lines back to SDRAM * which will cause the system to hang. */ - omap_sram_io_desc[0].type = MT_MEMORY_NONCACHED; + cached = 0; } - omap_sram_io_desc[0].virtual = omap_sram_base; - base = omap_sram_start; - base = ROUND_DOWN(base, PAGE_SIZE); - omap_sram_io_desc[0].pfn = __phys_to_pfn(base); - omap_sram_io_desc[0].length = ROUND_DOWN(omap_sram_size, PAGE_SIZE); - iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc)); - - pr_info("SRAM: Mapped pa 0x%08llx to va 0x%08lx size: 0x%lx\n", - (long long) __pfn_to_phys(omap_sram_io_desc[0].pfn), - omap_sram_io_desc[0].virtual, - omap_sram_io_desc[0].length); + omap_sram_start = ROUND_DOWN(omap_sram_start, PAGE_SIZE); + omap_sram_base = __arm_ioremap_exec(omap_sram_start, omap_sram_size, + cached); + if (!omap_sram_base) { + pr_err("SRAM: Could not map\n"); + return; + } - /* - * Normally devicemaps_init() would flush caches and tlb after - * mdesc->map_io(), but since we're called from map_io(), we - * must do it here. - */ - local_flush_tlb_all(); - flush_cache_all(); + omap_sram_ceil = omap_sram_base + omap_sram_size; /* * Looks like we need to preserve some bootloader code at the @@ -251,13 +201,18 @@ static void __init omap_map_sram(void) */ void *omap_sram_push_address(unsigned long size) { - if (size > (omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ))) { + unsigned long available, new_ceil = (unsigned long)omap_sram_ceil; + + available = omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ); + + if (size > available) { pr_err("Not enough space in SRAM\n"); return NULL; } - omap_sram_ceil -= size; - omap_sram_ceil = ROUND_DOWN(omap_sram_ceil, FNCPY_ALIGN); + new_ceil -= size; + new_ceil = ROUND_DOWN(new_ceil, FNCPY_ALIGN); + omap_sram_ceil = IOMEM(new_ceil); return (void *)omap_sram_ceil; } diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index 8c5b3029b39..d8973ac46bc 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -9,7 +9,6 @@ config PLAT_S3C24XX select NO_IOPORT select ARCH_REQUIRE_GPIOLIB select S3C_DEV_NAND - select S3C_GPIO_CFG_S3C24XX help Base platform code for any Samsung S3C24XX device diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index 0291bd6e236..b2b01125de6 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -14,9 +14,7 @@ obj- := obj-y += cpu.o obj-y += irq.o -obj-y += devs.o -obj-y += gpio.o -obj-y += gpiolib.o +obj-y += dev-uart.o obj-y += clock.o obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index c1fc6c6fac7..3c6335307fb 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -215,19 +215,18 @@ static void s3c24xx_pm_restart(char mode, const char *cmd) void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) { - unsigned long idcode = 0x0; - /* initialise the io descriptors we need for initialisation */ iotable_init(mach_desc, size); iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc)); if (cpu_architecture() >= CPU_ARCH_ARMv5) { - idcode = s3c24xx_read_idcode_v5(); + samsung_cpu_id = s3c24xx_read_idcode_v5(); } else { - idcode = s3c24xx_read_idcode_v4(); + samsung_cpu_id = s3c24xx_read_idcode_v4(); } + s3c24xx_init_cpu(); arm_pm_restart = s3c24xx_pm_restart; - s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids)); + s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); } diff --git a/arch/arm/plat-s3c24xx/dev-uart.c b/arch/arm/plat-s3c24xx/dev-uart.c new file mode 100644 index 00000000000..9ab22e662ff --- /dev/null +++ b/arch/arm/plat-s3c24xx/dev-uart.c @@ -0,0 +1,100 @@ +/* linux/arch/arm/plat-s3c24xx/dev-uart.c + * + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Base S3C24XX UART resource and platform device definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/serial_core.h> +#include <linux/platform_device.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> +#include <mach/hardware.h> +#include <mach/map.h> + +#include <plat/devs.h> +#include <plat/regs-serial.h> + +/* Serial port registrations */ + +static struct resource s3c2410_uart0_resource[] = { + [0] = { + .start = S3C2410_PA_UART0, + .end = S3C2410_PA_UART0 + 0x3fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_S3CUART_RX0, + .end = IRQ_S3CUART_ERR0, + .flags = IORESOURCE_IRQ, + } +}; + +static struct resource s3c2410_uart1_resource[] = { + [0] = { + .start = S3C2410_PA_UART1, + .end = S3C2410_PA_UART1 + 0x3fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_S3CUART_RX1, + .end = IRQ_S3CUART_ERR1, + .flags = IORESOURCE_IRQ, + } +}; + +static struct resource s3c2410_uart2_resource[] = { + [0] = { + .start = S3C2410_PA_UART2, + .end = S3C2410_PA_UART2 + 0x3fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_S3CUART_RX2, + .end = IRQ_S3CUART_ERR2, + .flags = IORESOURCE_IRQ, + } +}; + +static struct resource s3c2410_uart3_resource[] = { + [0] = { + .start = S3C2443_PA_UART3, + .end = S3C2443_PA_UART3 + 0x3fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_S3CUART_RX3, + .end = IRQ_S3CUART_ERR3, + .flags = IORESOURCE_IRQ, + }, +}; + +struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = { + [0] = { + .resources = s3c2410_uart0_resource, + .nr_resources = ARRAY_SIZE(s3c2410_uart0_resource), + }, + [1] = { + .resources = s3c2410_uart1_resource, + .nr_resources = ARRAY_SIZE(s3c2410_uart1_resource), + }, + [2] = { + .resources = s3c2410_uart2_resource, + .nr_resources = ARRAY_SIZE(s3c2410_uart2_resource), + }, + [3] = { + .resources = s3c2410_uart3_resource, + .nr_resources = ARRAY_SIZE(s3c2410_uart3_resource), + }, +}; diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c deleted file mode 100644 index a76bf2df333..00000000000 --- a/arch/arm/plat-s3c24xx/devs.c +++ /dev/null @@ -1,528 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/devs.c - * - * Copyright (c) 2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Base S3C24XX platform device definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/dma-mapping.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> -#include <mach/fb.h> -#include <mach/hardware.h> -#include <mach/dma.h> -#include <mach/irqs.h> -#include <asm/irq.h> - -#include <plat/regs-serial.h> -#include <plat/udc.h> -#include <plat/mci.h> - -#include <plat/devs.h> -#include <plat/cpu.h> -#include <plat/regs-spi.h> -#include <plat/ts.h> - -/* Serial port registrations */ - -static struct resource s3c2410_uart0_resource[] = { - [0] = { - .start = S3C2410_PA_UART0, - .end = S3C2410_PA_UART0 + 0x3fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_S3CUART_RX0, - .end = IRQ_S3CUART_ERR0, - .flags = IORESOURCE_IRQ, - } -}; - -static struct resource s3c2410_uart1_resource[] = { - [0] = { - .start = S3C2410_PA_UART1, - .end = S3C2410_PA_UART1 + 0x3fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_S3CUART_RX1, - .end = IRQ_S3CUART_ERR1, - .flags = IORESOURCE_IRQ, - } -}; - -static struct resource s3c2410_uart2_resource[] = { - [0] = { - .start = S3C2410_PA_UART2, - .end = S3C2410_PA_UART2 + 0x3fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_S3CUART_RX2, - .end = IRQ_S3CUART_ERR2, - .flags = IORESOURCE_IRQ, - } -}; - -static struct resource s3c2410_uart3_resource[] = { - [0] = { - .start = S3C2443_PA_UART3, - .end = S3C2443_PA_UART3 + 0x3fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_S3CUART_RX3, - .end = IRQ_S3CUART_ERR3, - .flags = IORESOURCE_IRQ, - }, -}; - -struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = { - [0] = { - .resources = s3c2410_uart0_resource, - .nr_resources = ARRAY_SIZE(s3c2410_uart0_resource), - }, - [1] = { - .resources = s3c2410_uart1_resource, - .nr_resources = ARRAY_SIZE(s3c2410_uart1_resource), - }, - [2] = { - .resources = s3c2410_uart2_resource, - .nr_resources = ARRAY_SIZE(s3c2410_uart2_resource), - }, - [3] = { - .resources = s3c2410_uart3_resource, - .nr_resources = ARRAY_SIZE(s3c2410_uart3_resource), - }, -}; - -/* LCD Controller */ - -static struct resource s3c_lcd_resource[] = { - [0] = { - .start = S3C24XX_PA_LCD, - .end = S3C24XX_PA_LCD + S3C24XX_SZ_LCD - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_LCD, - .end = IRQ_LCD, - .flags = IORESOURCE_IRQ, - } - -}; - -static u64 s3c_device_lcd_dmamask = 0xffffffffUL; - -struct platform_device s3c_device_lcd = { - .name = "s3c2410-lcd", - .id = -1, - .num_resources = ARRAY_SIZE(s3c_lcd_resource), - .resource = s3c_lcd_resource, - .dev = { - .dma_mask = &s3c_device_lcd_dmamask, - .coherent_dma_mask = 0xffffffffUL - } -}; - -EXPORT_SYMBOL(s3c_device_lcd); - -void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd) -{ - struct s3c2410fb_mach_info *npd; - - npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_lcd); - if (npd) { - npd->displays = kmemdup(pd->displays, - sizeof(struct s3c2410fb_display) * npd->num_displays, - GFP_KERNEL); - if (!npd->displays) - printk(KERN_ERR "no memory for LCD display data\n"); - } else { - printk(KERN_ERR "no memory for LCD platform data\n"); - } -} - -/* Touchscreen */ - -static struct resource s3c_ts_resource[] = { - [0] = { - .start = S3C24XX_PA_ADC, - .end = S3C24XX_PA_ADC + S3C24XX_SZ_ADC - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_TC, - .end = IRQ_TC, - .flags = IORESOURCE_IRQ, - }, - -}; - -struct platform_device s3c_device_ts = { - .name = "s3c2410-ts", - .id = -1, - .dev.parent = &s3c_device_adc.dev, - .num_resources = ARRAY_SIZE(s3c_ts_resource), - .resource = s3c_ts_resource, -}; -EXPORT_SYMBOL(s3c_device_ts); - -void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_info) -{ - s3c_set_platdata(hard_s3c2410ts_info, - sizeof(struct s3c2410_ts_mach_info), &s3c_device_ts); -} - -/* USB Device (Gadget)*/ - -static struct resource s3c_usbgadget_resource[] = { - [0] = { - .start = S3C24XX_PA_USBDEV, - .end = S3C24XX_PA_USBDEV + S3C24XX_SZ_USBDEV - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_USBD, - .end = IRQ_USBD, - .flags = IORESOURCE_IRQ, - } - -}; - -struct platform_device s3c_device_usbgadget = { - .name = "s3c2410-usbgadget", - .id = -1, - .num_resources = ARRAY_SIZE(s3c_usbgadget_resource), - .resource = s3c_usbgadget_resource, -}; - -EXPORT_SYMBOL(s3c_device_usbgadget); - -void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *pd) -{ - s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usbgadget); -} - -/* USB High Speed 2.0 Device (Gadget) */ -static struct resource s3c_hsudc_resource[] = { - [0] = { - .start = S3C2416_PA_HSUDC, - .end = S3C2416_PA_HSUDC + S3C2416_SZ_HSUDC - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_USBD, - .end = IRQ_USBD, - .flags = IORESOURCE_IRQ, - } -}; - -static u64 s3c_hsudc_dmamask = DMA_BIT_MASK(32); - -struct platform_device s3c_device_usb_hsudc = { - .name = "s3c-hsudc", - .id = -1, - .num_resources = ARRAY_SIZE(s3c_hsudc_resource), - .resource = s3c_hsudc_resource, - .dev = { - .dma_mask = &s3c_hsudc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd) -{ - s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usb_hsudc); -} - -/* IIS */ - -static struct resource s3c_iis_resource[] = { - [0] = { - .start = S3C24XX_PA_IIS, - .end = S3C24XX_PA_IIS + S3C24XX_SZ_IIS -1, - .flags = IORESOURCE_MEM, - } -}; - -static u64 s3c_device_iis_dmamask = 0xffffffffUL; - -struct platform_device s3c_device_iis = { - .name = "s3c24xx-iis", - .id = -1, - .num_resources = ARRAY_SIZE(s3c_iis_resource), - .resource = s3c_iis_resource, - .dev = { - .dma_mask = &s3c_device_iis_dmamask, - .coherent_dma_mask = 0xffffffffUL - } -}; - -EXPORT_SYMBOL(s3c_device_iis); - -/* RTC */ - -static struct resource s3c_rtc_resource[] = { - [0] = { - .start = S3C24XX_PA_RTC, - .end = S3C24XX_PA_RTC + 0xff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_RTC, - .end = IRQ_RTC, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_TICK, - .end = IRQ_TICK, - .flags = IORESOURCE_IRQ - } -}; - -struct platform_device s3c_device_rtc = { - .name = "s3c2410-rtc", - .id = -1, - .num_resources = ARRAY_SIZE(s3c_rtc_resource), - .resource = s3c_rtc_resource, -}; - -EXPORT_SYMBOL(s3c_device_rtc); - -/* ADC */ - -static struct resource s3c_adc_resource[] = { - [0] = { - .start = S3C24XX_PA_ADC, - .end = S3C24XX_PA_ADC + S3C24XX_SZ_ADC - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_TC, - .end = IRQ_TC, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_ADC, - .end = IRQ_ADC, - .flags = IORESOURCE_IRQ, - } - -}; - -struct platform_device s3c_device_adc = { - .name = "s3c24xx-adc", - .id = -1, - .num_resources = ARRAY_SIZE(s3c_adc_resource), - .resource = s3c_adc_resource, -}; - -/* SDI */ - -static struct resource s3c_sdi_resource[] = { - [0] = { - .start = S3C24XX_PA_SDI, - .end = S3C24XX_PA_SDI + S3C24XX_SZ_SDI - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_SDI, - .end = IRQ_SDI, - .flags = IORESOURCE_IRQ, - } - -}; - -struct platform_device s3c_device_sdi = { - .name = "s3c2410-sdi", - .id = -1, - .num_resources = ARRAY_SIZE(s3c_sdi_resource), - .resource = s3c_sdi_resource, -}; - -EXPORT_SYMBOL(s3c_device_sdi); - -void __init s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata) -{ - s3c_set_platdata(pdata, sizeof(struct s3c24xx_mci_pdata), - &s3c_device_sdi); -} - - -/* SPI (0) */ - -static struct resource s3c_spi0_resource[] = { - [0] = { - .start = S3C24XX_PA_SPI, - .end = S3C24XX_PA_SPI + 0x1f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_SPI0, - .end = IRQ_SPI0, - .flags = IORESOURCE_IRQ, - } - -}; - -static u64 s3c_device_spi0_dmamask = 0xffffffffUL; - -struct platform_device s3c_device_spi0 = { - .name = "s3c2410-spi", - .id = 0, - .num_resources = ARRAY_SIZE(s3c_spi0_resource), - .resource = s3c_spi0_resource, - .dev = { - .dma_mask = &s3c_device_spi0_dmamask, - .coherent_dma_mask = 0xffffffffUL - } -}; - -EXPORT_SYMBOL(s3c_device_spi0); - -/* SPI (1) */ - -static struct resource s3c_spi1_resource[] = { - [0] = { - .start = S3C24XX_PA_SPI + S3C2410_SPI1, - .end = S3C24XX_PA_SPI + S3C2410_SPI1 + 0x1f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_SPI1, - .end = IRQ_SPI1, - .flags = IORESOURCE_IRQ, - } - -}; - -static u64 s3c_device_spi1_dmamask = 0xffffffffUL; - -struct platform_device s3c_device_spi1 = { - .name = "s3c2410-spi", - .id = 1, - .num_resources = ARRAY_SIZE(s3c_spi1_resource), - .resource = s3c_spi1_resource, - .dev = { - .dma_mask = &s3c_device_spi1_dmamask, - .coherent_dma_mask = 0xffffffffUL - } -}; - -EXPORT_SYMBOL(s3c_device_spi1); - -#ifdef CONFIG_CPU_S3C2440 - -/* Camif Controller */ - -static struct resource s3c_camif_resource[] = { - [0] = { - .start = S3C2440_PA_CAMIF, - .end = S3C2440_PA_CAMIF + S3C2440_SZ_CAMIF - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_CAM, - .end = IRQ_CAM, - .flags = IORESOURCE_IRQ, - } - -}; - -static u64 s3c_device_camif_dmamask = 0xffffffffUL; - -struct platform_device s3c_device_camif = { - .name = "s3c2440-camif", - .id = -1, - .num_resources = ARRAY_SIZE(s3c_camif_resource), - .resource = s3c_camif_resource, - .dev = { - .dma_mask = &s3c_device_camif_dmamask, - .coherent_dma_mask = 0xffffffffUL - } -}; - -EXPORT_SYMBOL(s3c_device_camif); - -/* AC97 */ - -static struct resource s3c_ac97_resource[] = { - [0] = { - .start = S3C2440_PA_AC97, - .end = S3C2440_PA_AC97 + S3C2440_SZ_AC97 -1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_S3C244x_AC97, - .end = IRQ_S3C244x_AC97, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .name = "PCM out", - .start = DMACH_PCM_OUT, - .end = DMACH_PCM_OUT, - .flags = IORESOURCE_DMA, - }, - [3] = { - .name = "PCM in", - .start = DMACH_PCM_IN, - .end = DMACH_PCM_IN, - .flags = IORESOURCE_DMA, - }, - [4] = { - .name = "Mic in", - .start = DMACH_MIC_IN, - .end = DMACH_MIC_IN, - .flags = IORESOURCE_DMA, - }, -}; - -static u64 s3c_device_audio_dmamask = 0xffffffffUL; - -struct platform_device s3c_device_ac97 = { - .name = "samsung-ac97", - .id = -1, - .num_resources = ARRAY_SIZE(s3c_ac97_resource), - .resource = s3c_ac97_resource, - .dev = { - .dma_mask = &s3c_device_audio_dmamask, - .coherent_dma_mask = 0xffffffffUL - } -}; - -EXPORT_SYMBOL(s3c_device_ac97); - -/* ASoC I2S */ - -struct platform_device s3c2412_device_iis = { - .name = "s3c2412-iis", - .id = -1, - .dev = { - .dma_mask = &s3c_device_audio_dmamask, - .coherent_dma_mask = 0xffffffffUL - } -}; - -EXPORT_SYMBOL(s3c2412_device_iis); - -#endif // CONFIG_CPU_S32440 diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 539bd0e3def..53754bcf15a 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -1094,14 +1094,14 @@ EXPORT_SYMBOL(s3c2410_dma_config); * * configure the dma source/destination hardware type and address * - * source: S3C2410_DMASRC_HW: source is hardware - * S3C2410_DMASRC_MEM: source is memory + * source: DMA_FROM_DEVICE: source is hardware + * DMA_TO_DEVICE: source is memory * * devaddr: physical address of the source */ int s3c2410_dma_devconfig(enum dma_ch channel, - enum s3c2410_dmasrc source, + enum dma_data_direction source, unsigned long devaddr) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -1131,7 +1131,7 @@ int s3c2410_dma_devconfig(enum dma_ch channel, hwcfg |= S3C2410_DISRCC_INC; switch (source) { - case S3C2410_DMASRC_HW: + case DMA_FROM_DEVICE: /* source is hardware */ pr_debug("%s: hw source, devaddr=%08lx, hwcfg=%d\n", __func__, devaddr, hwcfg); @@ -1142,7 +1142,7 @@ int s3c2410_dma_devconfig(enum dma_ch channel, chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DIDST); break; - case S3C2410_DMASRC_MEM: + case DMA_TO_DEVICE: /* source is memory */ pr_debug("%s: mem source, devaddr=%08lx, hwcfg=%d\n", __func__, devaddr, hwcfg); diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c deleted file mode 100644 index 2f3d7c089df..00000000000 --- a/arch/arm/plat-s3c24xx/gpio.c +++ /dev/null @@ -1,96 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/gpio.c - * - * Copyright (c) 2004-2010 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX GPIO support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/gpio.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/gpio-fns.h> -#include <asm/irq.h> - -#include <mach/regs-gpio.h> - -#include <plat/gpio-core.h> - -/* gpiolib wrappers until these are totally eliminated */ - -void s3c2410_gpio_pullup(unsigned int pin, unsigned int to) -{ - int ret; - - WARN_ON(to); /* should be none of these left */ - - if (!to) { - /* if pull is enabled, try first with up, and if that - * fails, try using down */ - - ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP); - if (ret) - s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN); - } else { - s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE); - } -} -EXPORT_SYMBOL(s3c2410_gpio_pullup); - -void s3c2410_gpio_setpin(unsigned int pin, unsigned int to) -{ - /* do this via gpiolib until all users removed */ - - gpio_request(pin, "temporary"); - gpio_set_value(pin, to); - gpio_free(pin); -} - -EXPORT_SYMBOL(s3c2410_gpio_setpin); - -unsigned int s3c2410_gpio_getpin(unsigned int pin) -{ - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); - unsigned long offs = pin - chip->chip.base; - - return __raw_readl(chip->base + 0x04) & (1<< offs); -} - -EXPORT_SYMBOL(s3c2410_gpio_getpin); - -unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change) -{ - unsigned long flags; - unsigned long misccr; - - local_irq_save(flags); - misccr = __raw_readl(S3C24XX_MISCCR); - misccr &= ~clear; - misccr ^= change; - __raw_writel(misccr, S3C24XX_MISCCR); - local_irq_restore(flags); - - return misccr; -} - -EXPORT_SYMBOL(s3c2410_modify_misccr); diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c deleted file mode 100644 index 243b6411050..00000000000 --- a/arch/arm/plat-s3c24xx/gpiolib.c +++ /dev/null @@ -1,229 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/gpiolib.c - * - * Copyright (c) 2008-2010 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX GPIOlib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. -*/ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/sysdev.h> -#include <linux/ioport.h> -#include <linux/io.h> -#include <linux/gpio.h> - -#include <plat/gpio-core.h> -#include <plat/gpio-cfg.h> -#include <plat/gpio-cfg-helpers.h> -#include <mach/hardware.h> -#include <asm/irq.h> -#include <plat/pm.h> - -#include <mach/regs-gpio.h> - -static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset) -{ - return -EINVAL; -} - -static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long flags; - unsigned long dat; - unsigned long con; - - local_irq_save(flags); - - con = __raw_readl(base + 0x00); - dat = __raw_readl(base + 0x04); - - dat &= ~(1 << offset); - if (value) - dat |= 1 << offset; - - __raw_writel(dat, base + 0x04); - - con &= ~(1 << offset); - - __raw_writel(con, base + 0x00); - __raw_writel(dat, base + 0x04); - - local_irq_restore(flags); - return 0; -} - -static int s3c24xx_gpiolib_bankf_toirq(struct gpio_chip *chip, unsigned offset) -{ - if (offset < 4) - return IRQ_EINT0 + offset; - - if (offset < 8) - return IRQ_EINT4 + offset - 4; - - return -EINVAL; -} - -static struct s3c_gpio_cfg s3c24xx_gpiocfg_banka = { - .set_config = s3c_gpio_setcfg_s3c24xx_a, - .get_config = s3c_gpio_getcfg_s3c24xx_a, -}; - -struct s3c_gpio_cfg s3c24xx_gpiocfg_default = { - .set_config = s3c_gpio_setcfg_s3c24xx, - .get_config = s3c_gpio_getcfg_s3c24xx, -}; - -struct s3c_gpio_chip s3c24xx_gpios[] = { - [0] = { - .base = S3C2410_GPACON, - .pm = __gpio_pm(&s3c_gpio_pm_1bit), - .config = &s3c24xx_gpiocfg_banka, - .chip = { - .base = S3C2410_GPA(0), - .owner = THIS_MODULE, - .label = "GPIOA", - .ngpio = 24, - .direction_input = s3c24xx_gpiolib_banka_input, - .direction_output = s3c24xx_gpiolib_banka_output, - }, - }, - [1] = { - .base = S3C2410_GPBCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPB(0), - .owner = THIS_MODULE, - .label = "GPIOB", - .ngpio = 16, - }, - }, - [2] = { - .base = S3C2410_GPCCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPC(0), - .owner = THIS_MODULE, - .label = "GPIOC", - .ngpio = 16, - }, - }, - [3] = { - .base = S3C2410_GPDCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPD(0), - .owner = THIS_MODULE, - .label = "GPIOD", - .ngpio = 16, - }, - }, - [4] = { - .base = S3C2410_GPECON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPE(0), - .label = "GPIOE", - .owner = THIS_MODULE, - .ngpio = 16, - }, - }, - [5] = { - .base = S3C2410_GPFCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPF(0), - .owner = THIS_MODULE, - .label = "GPIOF", - .ngpio = 8, - .to_irq = s3c24xx_gpiolib_bankf_toirq, - }, - }, - [6] = { - .base = S3C2410_GPGCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .irq_base = IRQ_EINT8, - .chip = { - .base = S3C2410_GPG(0), - .owner = THIS_MODULE, - .label = "GPIOG", - .ngpio = 16, - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = S3C2410_GPHCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPH(0), - .owner = THIS_MODULE, - .label = "GPIOH", - .ngpio = 11, - }, - }, - /* GPIOS for the S3C2443 and later devices. */ - { - .base = S3C2440_GPJCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPJ(0), - .owner = THIS_MODULE, - .label = "GPIOJ", - .ngpio = 16, - }, - }, { - .base = S3C2443_GPKCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPK(0), - .owner = THIS_MODULE, - .label = "GPIOK", - .ngpio = 16, - }, - }, { - .base = S3C2443_GPLCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPL(0), - .owner = THIS_MODULE, - .label = "GPIOL", - .ngpio = 15, - }, - }, { - .base = S3C2443_GPMCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPM(0), - .owner = THIS_MODULE, - .label = "GPIOM", - .ngpio = 2, - }, - }, -}; - - -static __init int s3c24xx_gpiolib_init(void) -{ - struct s3c_gpio_chip *chip = s3c24xx_gpios; - int gpn; - - for (gpn = 0; gpn < ARRAY_SIZE(s3c24xx_gpios); gpn++, chip++) { - if (!chip->config) - chip->config = &s3c24xx_gpiocfg_default; - - s3c_gpiolib_add(chip); - } - - return 0; -} - -core_initcall(s3c24xx_gpiolib_init); diff --git a/arch/arm/plat-s3c24xx/include/mach/clkdev.h b/arch/arm/plat-s3c24xx/include/mach/clkdev.h deleted file mode 100644 index 7dffa83d23f..00000000000 --- a/arch/arm/plat-s3c24xx/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __MACH_CLKDEV_H__ -#define __MACH_CLKDEV_H__ - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do {} while (0) - -#endif diff --git a/arch/arm/plat-s3c24xx/include/mach/pwm-clock.h b/arch/arm/plat-s3c24xx/include/mach/pwm-clock.h deleted file mode 100644 index a087de21bc2..00000000000 --- a/arch/arm/plat-s3c24xx/include/mach/pwm-clock.h +++ /dev/null @@ -1,55 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/include/mach/pwm-clock.h - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C24xx - pwm clock and timer support - */ - -/** - * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk - * @cfg: The timer TCFG1 register bits shifted down to 0. - * - * Return true if the given configuration from TCFG1 is a TCLK instead - * any of the TDIV clocks. - */ -static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) -{ - return tcfg == S3C2410_TCFG1_MUX_TCLK; -} - -/** - * tcfg_to_divisor() - convert tcfg1 setting to a divisor - * @tcfg1: The tcfg1 setting, shifted down. - * - * Get the divisor value for the given tcfg1 setting. We assume the - * caller has already checked to see if this is not a TCLK source. - */ -static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) -{ - return 1 << (1 + tcfg1); -} - -/** - * pwm_tdiv_has_div1() - does the tdiv setting have a /1 - * - * Return true if we have a /1 in the tdiv setting. - */ -static inline unsigned int pwm_tdiv_has_div1(void) -{ - return 0; -} - -/** - * pwm_tdiv_div_bits() - calculate TCFG1 divisor value. - * @div: The divisor to calculate the bit information for. - * - * Turn a divisor into the necessary bit field for TCFG1. - */ -static inline unsigned long pwm_tdiv_div_bits(unsigned int div) -{ - return ilog2(div) - 1; -} - -#define S3C_TCFG1_MUX_TCLK S3C2410_TCFG1_MUX_TCLK diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h deleted file mode 100644 index bd534d32b99..00000000000 --- a/arch/arm/plat-s3c24xx/include/plat/map.h +++ /dev/null @@ -1,100 +0,0 @@ -/* linux/include/asm-arm/plat-s3c24xx/map.h - * - * Copyright (c) 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_S3C24XX_MAP_H -#define __ASM_PLAT_S3C24XX_MAP_H - -/* interrupt controller is the first thing we put in, to make - * the assembly code for the irq detection easier - */ -#define S3C24XX_VA_IRQ S3C_VA_IRQ -#define S3C2410_PA_IRQ (0x4A000000) -#define S3C24XX_SZ_IRQ SZ_1M - -/* memory controller registers */ -#define S3C24XX_VA_MEMCTRL S3C_VA_MEM -#define S3C2410_PA_MEMCTRL (0x48000000) -#define S3C24XX_SZ_MEMCTRL SZ_1M - -/* UARTs */ -#define S3C24XX_VA_UART S3C_VA_UART -#define S3C2410_PA_UART (0x50000000) -#define S3C24XX_SZ_UART SZ_1M -#define S3C_UART_OFFSET (0x4000) - -#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET))) - -/* Timers */ -#define S3C24XX_VA_TIMER S3C_VA_TIMER -#define S3C2410_PA_TIMER (0x51000000) -#define S3C24XX_SZ_TIMER SZ_1M - -/* Clock and Power management */ -#define S3C24XX_VA_CLKPWR S3C_VA_SYS -#define S3C24XX_SZ_CLKPWR SZ_1M - -/* USB Device port */ -#define S3C2410_PA_USBDEV (0x52000000) -#define S3C24XX_SZ_USBDEV SZ_1M - -/* Watchdog */ -#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG -#define S3C2410_PA_WATCHDOG (0x53000000) -#define S3C24XX_SZ_WATCHDOG SZ_1M - -/* Standard size definitions for peripheral blocks. */ - -#define S3C24XX_SZ_IIS SZ_1M -#define S3C24XX_SZ_ADC SZ_1M -#define S3C24XX_SZ_SPI SZ_1M -#define S3C24XX_SZ_SDI SZ_1M -#define S3C24XX_SZ_NAND SZ_1M - -/* GPIO ports */ - -/* the calculation for the VA of this must ensure that - * it is the same distance apart from the UART in the - * phsyical address space, as the initial mapping for the IO - * is done as a 1:1 mapping. This puts it (currently) at - * 0xFA800000, which is not in the way of any current mapping - * by the base system. -*/ - -#define S3C2410_PA_GPIO (0x56000000) -#define S3C24XX_VA_GPIO ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART) -#define S3C24XX_SZ_GPIO SZ_1M - - -/* ISA style IO, for each machine to sort out mappings for, if it - * implements it. We reserve two 16M regions for ISA. - */ - -#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000) -#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000) - -/* deal with the registers that move under the 2412/2413 */ - -#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) -#ifndef __ASSEMBLY__ -extern void __iomem *s3c24xx_va_gpio2; -#endif -#ifdef CONFIG_CPU_S3C2412_ONLY -#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10) -#else -#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2 -#endif -#else -#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO -#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO -#endif - -#endif /* __ASM_PLAT_S3C24XX_MAP_H */ diff --git a/arch/arm/plat-s3c24xx/include/plat/pll.h b/arch/arm/plat-s3c24xx/include/plat/pll.h deleted file mode 100644 index 005729a1077..00000000000 --- a/arch/arm/plat-s3c24xx/include/plat/pll.h +++ /dev/null @@ -1,62 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/include/plat/pll.h - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C24xx - common pll registers and code - */ - -#define S3C24XX_PLLCON_MDIVSHIFT 12 -#define S3C24XX_PLLCON_PDIVSHIFT 4 -#define S3C24XX_PLLCON_SDIVSHIFT 0 -#define S3C24XX_PLLCON_MDIVMASK ((1<<(1+(19-12)))-1) -#define S3C24XX_PLLCON_PDIVMASK ((1<<5)-1) -#define S3C24XX_PLLCON_SDIVMASK 3 - -#include <asm/div64.h> - -static inline unsigned int -s3c24xx_get_pll(unsigned int pllval, unsigned int baseclk) -{ - unsigned int mdiv, pdiv, sdiv; - uint64_t fvco; - - mdiv = pllval >> S3C24XX_PLLCON_MDIVSHIFT; - pdiv = pllval >> S3C24XX_PLLCON_PDIVSHIFT; - sdiv = pllval >> S3C24XX_PLLCON_SDIVSHIFT; - - mdiv &= S3C24XX_PLLCON_MDIVMASK; - pdiv &= S3C24XX_PLLCON_PDIVMASK; - sdiv &= S3C24XX_PLLCON_SDIVMASK; - - fvco = (uint64_t)baseclk * (mdiv + 8); - do_div(fvco, (pdiv + 2) << sdiv); - - return (unsigned int)fvco; -} - -#define S3C2416_PLL_M_SHIFT (14) -#define S3C2416_PLL_P_SHIFT (5) -#define S3C2416_PLL_S_MASK (7) -#define S3C2416_PLL_M_MASK ((1 << 10) - 1) -#define S3C2416_PLL_P_MASK (63) - -static inline unsigned int -s3c2416_get_pll(unsigned int pllval, unsigned int baseclk) -{ - unsigned int m, p, s; - uint64_t fvco; - - m = pllval >> S3C2416_PLL_M_SHIFT; - p = pllval >> S3C2416_PLL_P_SHIFT; - - s = pllval & S3C2416_PLL_S_MASK; - m &= S3C2416_PLL_M_MASK; - p &= S3C2416_PLL_P_MASK; - - fvco = (uint64_t)baseclk * m; - do_div(fvco, (p << s)); - - return (unsigned int)fvco; -} diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-iis.h b/arch/arm/plat-s3c24xx/include/plat/regs-iis.h deleted file mode 100644 index cc44e0e931e..00000000000 --- a/arch/arm/plat-s3c24xx/include/plat/regs-iis.h +++ /dev/null @@ -1,68 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-iis.h - * - * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 IIS register definition -*/ - -#ifndef __ASM_ARCH_REGS_IIS_H -#define __ASM_ARCH_REGS_IIS_H - -#define S3C2410_IISCON (0x00) - -#define S3C2410_IISCON_LRINDEX (1<<8) -#define S3C2410_IISCON_TXFIFORDY (1<<7) -#define S3C2410_IISCON_RXFIFORDY (1<<6) -#define S3C2410_IISCON_TXDMAEN (1<<5) -#define S3C2410_IISCON_RXDMAEN (1<<4) -#define S3C2410_IISCON_TXIDLE (1<<3) -#define S3C2410_IISCON_RXIDLE (1<<2) -#define S3C2410_IISCON_PSCEN (1<<1) -#define S3C2410_IISCON_IISEN (1<<0) - -#define S3C2410_IISMOD (0x04) - -#define S3C2440_IISMOD_MPLL (1<<9) -#define S3C2410_IISMOD_SLAVE (1<<8) -#define S3C2410_IISMOD_NOXFER (0<<6) -#define S3C2410_IISMOD_RXMODE (1<<6) -#define S3C2410_IISMOD_TXMODE (2<<6) -#define S3C2410_IISMOD_TXRXMODE (3<<6) -#define S3C2410_IISMOD_LR_LLOW (0<<5) -#define S3C2410_IISMOD_LR_RLOW (1<<5) -#define S3C2410_IISMOD_IIS (0<<4) -#define S3C2410_IISMOD_MSB (1<<4) -#define S3C2410_IISMOD_8BIT (0<<3) -#define S3C2410_IISMOD_16BIT (1<<3) -#define S3C2410_IISMOD_BITMASK (1<<3) -#define S3C2410_IISMOD_256FS (0<<2) -#define S3C2410_IISMOD_384FS (1<<2) -#define S3C2410_IISMOD_16FS (0<<0) -#define S3C2410_IISMOD_32FS (1<<0) -#define S3C2410_IISMOD_48FS (2<<0) -#define S3C2410_IISMOD_FS_MASK (3<<0) - -#define S3C2410_IISPSR (0x08) -#define S3C2410_IISPSR_INTMASK (31<<5) -#define S3C2410_IISPSR_INTSHIFT (5) -#define S3C2410_IISPSR_EXTMASK (31<<0) -#define S3C2410_IISPSR_EXTSHFIT (0) - -#define S3C2410_IISFCON (0x0c) - -#define S3C2410_IISFCON_TXDMA (1<<15) -#define S3C2410_IISFCON_RXDMA (1<<14) -#define S3C2410_IISFCON_TXENABLE (1<<13) -#define S3C2410_IISFCON_RXENABLE (1<<12) -#define S3C2410_IISFCON_TXMASK (0x3f << 6) -#define S3C2410_IISFCON_TXSHIFT (6) -#define S3C2410_IISFCON_RXMASK (0x3f) -#define S3C2410_IISFCON_RXSHIFT (0) - -#define S3C2410_IISFIFO (0x10) -#endif /* __ASM_ARCH_REGS_IIS_H */ diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-spi.h b/arch/arm/plat-s3c24xx/include/plat/regs-spi.h deleted file mode 100644 index 892e2f680fc..00000000000 --- a/arch/arm/plat-s3c24xx/include/plat/regs-spi.h +++ /dev/null @@ -1,81 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-spi.h - * - * Copyright (c) 2004 Fetron GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 SPI register definition -*/ - -#ifndef __ASM_ARCH_REGS_SPI_H -#define __ASM_ARCH_REGS_SPI_H - -#define S3C2410_SPI1 (0x20) -#define S3C2412_SPI1 (0x100) - -#define S3C2410_SPCON (0x00) - -#define S3C2412_SPCON_RXFIFO_RB2 (0<<14) -#define S3C2412_SPCON_RXFIFO_RB4 (1<<14) -#define S3C2412_SPCON_RXFIFO_RB12 (2<<14) -#define S3C2412_SPCON_RXFIFO_RB14 (3<<14) -#define S3C2412_SPCON_TXFIFO_RB2 (0<<12) -#define S3C2412_SPCON_TXFIFO_RB4 (1<<12) -#define S3C2412_SPCON_TXFIFO_RB12 (2<<12) -#define S3C2412_SPCON_TXFIFO_RB14 (3<<12) -#define S3C2412_SPCON_RXFIFO_RESET (1<<11) /* RxFIFO reset */ -#define S3C2412_SPCON_TXFIFO_RESET (1<<10) /* TxFIFO reset */ -#define S3C2412_SPCON_RXFIFO_EN (1<<9) /* RxFIFO Enable */ -#define S3C2412_SPCON_TXFIFO_EN (1<<8) /* TxFIFO Enable */ - -#define S3C2412_SPCON_DIRC_RX (1<<7) - -#define S3C2410_SPCON_SMOD_DMA (2<<5) /* DMA mode */ -#define S3C2410_SPCON_SMOD_INT (1<<5) /* interrupt mode */ -#define S3C2410_SPCON_SMOD_POLL (0<<5) /* polling mode */ -#define S3C2410_SPCON_ENSCK (1<<4) /* Enable SCK */ -#define S3C2410_SPCON_MSTR (1<<3) /* Master/Slave select - 0: slave, 1: master */ -#define S3C2410_SPCON_CPOL_HIGH (1<<2) /* Clock polarity select */ -#define S3C2410_SPCON_CPOL_LOW (0<<2) /* Clock polarity select */ - -#define S3C2410_SPCON_CPHA_FMTB (1<<1) /* Clock Phase Select */ -#define S3C2410_SPCON_CPHA_FMTA (0<<1) /* Clock Phase Select */ - -#define S3C2410_SPCON_TAGD (1<<0) /* Tx auto garbage data mode */ - - -#define S3C2410_SPSTA (0x04) - -#define S3C2412_SPSTA_RXFIFO_AE (1<<11) -#define S3C2412_SPSTA_TXFIFO_AE (1<<10) -#define S3C2412_SPSTA_RXFIFO_ERROR (1<<9) -#define S3C2412_SPSTA_TXFIFO_ERROR (1<<8) -#define S3C2412_SPSTA_RXFIFO_FIFO (1<<7) -#define S3C2412_SPSTA_RXFIFO_EMPTY (1<<6) -#define S3C2412_SPSTA_TXFIFO_NFULL (1<<5) -#define S3C2412_SPSTA_TXFIFO_EMPTY (1<<4) - -#define S3C2410_SPSTA_DCOL (1<<2) /* Data Collision Error */ -#define S3C2410_SPSTA_MULD (1<<1) /* Multi Master Error */ -#define S3C2410_SPSTA_READY (1<<0) /* Data Tx/Rx ready */ -#define S3C2412_SPSTA_READY_ORG (1<<3) - -#define S3C2410_SPPIN (0x08) - -#define S3C2410_SPPIN_ENMUL (1<<2) /* Multi Master Error detect */ -#define S3C2410_SPPIN_RESERVED (1<<1) -#define S3C2410_SPPIN_KEEP (1<<0) /* Master Out keep */ - -#define S3C2410_SPPRE (0x0C) -#define S3C2410_SPTDAT (0x10) -#define S3C2410_SPRDAT (0x14) - -#define S3C2412_TXFIFO (0x18) -#define S3C2412_RXFIFO (0x18) -#define S3C2412_SPFIC (0x24) - - -#endif /* __ASM_ARCH_REGS_SPI_H */ diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c index 59552c0ea5f..07a4c81587a 100644 --- a/arch/arm/plat-s3c24xx/s3c2443-clock.c +++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c @@ -205,9 +205,64 @@ static struct clksrc_clk clksrc_clks[] = { }, }; +static struct clk clk_i2s_ext = { + .name = "i2s-ext", +}; + +/* i2s_eplldiv + * + * This clock is the output from the I2S divisor of ESYSCLK, and is separate + * from the mux that comes after it (cannot merge into one single clock) +*/ + +static struct clksrc_clk clk_i2s_eplldiv = { + .clk = { + .name = "i2s-eplldiv", + .parent = &clk_esysclk.clk, + }, + .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, }, +}; + +/* i2s-ref + * + * i2s bus reference clock, selectable from external, esysclk or epllref + * + * Note, this used to be two clocks, but was compressed into one. +*/ + +static struct clk *clk_i2s_srclist[] = { + [0] = &clk_i2s_eplldiv.clk, + [1] = &clk_i2s_ext, + [2] = &clk_epllref.clk, + [3] = &clk_epllref.clk, +}; + +static struct clksrc_clk clk_i2s = { + .clk = { + .name = "i2s-if", + .ctrlbit = S3C2443_SCLKCON_I2SCLK, + .enable = s3c2443_clkcon_enable_s, + + }, + .sources = &(struct clksrc_sources) { + .sources = clk_i2s_srclist, + .nr_sources = ARRAY_SIZE(clk_i2s_srclist), + }, + .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 }, +}; static struct clk init_clocks_off[] = { { + .name = "iis", + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_IIS, + }, { + .name = "hsspi", + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_HSSPI, + }, { .name = "adc", .parent = &clk_p, .enable = s3c2443_clkcon_enable_p, @@ -406,6 +461,8 @@ static struct clk *clks[] __initdata = { }; static struct clksrc_clk *clksrcs[] __initdata = { + &clk_i2s_eplldiv, + &clk_i2s, &clk_usb_bus_host, &clk_epllref, &clk_esysclk, diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index 9843c954c04..7b9dadadb0a 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -16,9 +16,6 @@ config PLAT_S5P select S3C_GPIO_TRACK select S5P_GPIO_DRVSTR select SAMSUNG_GPIOLIB_4BIT - select S3C_GPIO_CFG_S3C64XX - select S3C_GPIO_PULL_UPDOWN - select S3C_GPIO_CFG_S3C24XX select PLAT_SAMSUNG select SAMSUNG_CLKSRC select SAMSUNG_IRQ_VIC_TIMER @@ -43,6 +40,12 @@ config S5P_HRT help Use the High Resolution timer support +config S5P_PM + bool + help + Common code for power management support on S5P and newer SoCs + Note: Do not select this for S5P6440 and S5P6450. + comment "System MMU" config S5P_SYSTEM_MMU @@ -51,6 +54,12 @@ config S5P_SYSTEM_MMU help Say Y here if you want to enable System MMU +config S5P_SLEEP + bool + help + Internal config node to apply common S5P sleep management code. + Can be selected by S5P and newer SoCs with similar sleep procedure. + config S5P_DEV_FIMC0 bool help @@ -76,6 +85,11 @@ config S5P_DEV_FIMD0 help Compile in platform device definitions for FIMD controller 0 +config S5P_DEV_I2C_HDMIPHY + bool + help + Compile in platform device definitions for I2C HDMIPHY controller + config S5P_DEV_MFC bool help @@ -96,6 +110,11 @@ config S5P_DEV_CSIS1 help Compile in platform device definitions for MIPI-CSIS channel 1 +config S5P_DEV_TV + bool + help + Compile in platform device definition for TV interface + config S5P_DEV_USB_EHCI bool help diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile index 4b53e04eeca..876344038b8 100644 --- a/arch/arm/plat-s5p/Makefile +++ b/arch/arm/plat-s5p/Makefile @@ -12,7 +12,6 @@ obj- := # Core files -obj-y += dev-pmu.o obj-y += dev-uart.o obj-y += cpu.o obj-y += clock.o @@ -20,19 +19,10 @@ obj-y += irq.o obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o obj-$(CONFIG_S5P_GPIO_INT) += irq-gpioint.o obj-$(CONFIG_S5P_SYSTEM_MMU) += sysmmu.o -obj-$(CONFIG_PM) += pm.o -obj-$(CONFIG_PM) += irq-pm.o +obj-$(CONFIG_S5P_PM) += pm.o irq-pm.o +obj-$(CONFIG_S5P_SLEEP) += sleep.o obj-$(CONFIG_S5P_HRT) += s5p-time.o # devices obj-$(CONFIG_S5P_DEV_MFC) += dev-mfc.o -obj-$(CONFIG_S5P_DEV_FIMC0) += dev-fimc0.o -obj-$(CONFIG_S5P_DEV_FIMC1) += dev-fimc1.o -obj-$(CONFIG_S5P_DEV_FIMC2) += dev-fimc2.o -obj-$(CONFIG_S5P_DEV_FIMC3) += dev-fimc3.o -obj-$(CONFIG_S5P_DEV_FIMD0) += dev-fimd0.o -obj-$(CONFIG_S5P_DEV_ONENAND) += dev-onenand.o -obj-$(CONFIG_S5P_DEV_CSIS0) += dev-csis0.o -obj-$(CONFIG_S5P_DEV_CSIS1) += dev-csis1.o -obj-$(CONFIG_S5P_DEV_USB_EHCI) += dev-ehci.o obj-$(CONFIG_S5P_SETUP_MIPIPHY) += setup-mipiphy.o diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c index 02af235298e..5f84a3f13ef 100644 --- a/arch/arm/plat-s5p/clock.c +++ b/arch/arm/plat-s5p/clock.c @@ -192,7 +192,7 @@ unsigned long s5p_spdif_get_rate(struct clk *clk) if (IS_ERR(pclk)) return -EINVAL; - rate = pclk->ops->get_rate(clk); + rate = pclk->ops->get_rate(pclk); clk_put(pclk); return rate; diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c index bbc2aa7449c..7b0a28f73a6 100644 --- a/arch/arm/plat-s5p/cpu.c +++ b/arch/arm/plat-s5p/cpu.c @@ -33,48 +33,66 @@ static const char name_s5p6450[] = "S5P6450"; static const char name_s5pc100[] = "S5PC100"; static const char name_s5pv210[] = "S5PV210/S5PC110"; static const char name_exynos4210[] = "EXYNOS4210"; +static const char name_exynos4212[] = "EXYNOS4212"; +static const char name_exynos4412[] = "EXYNOS4412"; static struct cpu_table cpu_ids[] __initdata = { { - .idcode = 0x56440100, - .idmask = 0xfffff000, + .idcode = S5P6440_CPU_ID, + .idmask = S5P64XX_CPU_MASK, .map_io = s5p6440_map_io, .init_clocks = s5p6440_init_clocks, .init_uarts = s5p6440_init_uarts, .init = s5p64x0_init, .name = name_s5p6440, }, { - .idcode = 0x36450000, - .idmask = 0xfffff000, + .idcode = S5P6450_CPU_ID, + .idmask = S5P64XX_CPU_MASK, .map_io = s5p6450_map_io, .init_clocks = s5p6450_init_clocks, .init_uarts = s5p6450_init_uarts, .init = s5p64x0_init, .name = name_s5p6450, }, { - .idcode = 0x43100000, - .idmask = 0xfffff000, + .idcode = S5PC100_CPU_ID, + .idmask = S5PC100_CPU_MASK, .map_io = s5pc100_map_io, .init_clocks = s5pc100_init_clocks, .init_uarts = s5pc100_init_uarts, .init = s5pc100_init, .name = name_s5pc100, }, { - .idcode = 0x43110000, - .idmask = 0xfffff000, + .idcode = S5PV210_CPU_ID, + .idmask = S5PV210_CPU_MASK, .map_io = s5pv210_map_io, .init_clocks = s5pv210_init_clocks, .init_uarts = s5pv210_init_uarts, .init = s5pv210_init, .name = name_s5pv210, }, { - .idcode = 0x43210000, - .idmask = 0xfffe0000, + .idcode = EXYNOS4210_CPU_ID, + .idmask = EXYNOS4_CPU_MASK, .map_io = exynos4_map_io, .init_clocks = exynos4_init_clocks, .init_uarts = exynos4_init_uarts, .init = exynos4_init, .name = name_exynos4210, + }, { + .idcode = EXYNOS4212_CPU_ID, + .idmask = EXYNOS4_CPU_MASK, + .map_io = exynos4_map_io, + .init_clocks = exynos4_init_clocks, + .init_uarts = exynos4_init_uarts, + .init = exynos4_init, + .name = name_exynos4212, + }, { + .idcode = EXYNOS4412_CPU_ID, + .idmask = EXYNOS4_CPU_MASK, + .map_io = exynos4_map_io, + .init_clocks = exynos4_init_clocks, + .init_uarts = exynos4_init_uarts, + .init = exynos4_init, + .name = name_exynos4412, }, }; @@ -114,13 +132,13 @@ static struct map_desc s5p_iodesc[] __initdata = { void __init s5p_init_io(struct map_desc *mach_desc, int size, void __iomem *cpuid_addr) { - unsigned long idcode; - /* initialize the io descriptors we need for initialization */ iotable_init(s5p_iodesc, ARRAY_SIZE(s5p_iodesc)); if (mach_desc) iotable_init(mach_desc, size); - idcode = __raw_readl(cpuid_addr); - s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids)); + /* detect cpu id and rev. */ + s5p_init_cpu(cpuid_addr); + + s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); } diff --git a/arch/arm/plat-s5p/dev-csis0.c b/arch/arm/plat-s5p/dev-csis0.c deleted file mode 100644 index e3aabef5e34..00000000000 --- a/arch/arm/plat-s5p/dev-csis0.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd. - * - * S5P series device definition for MIPI-CSIS channel 0 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <mach/map.h> - -static struct resource s5p_mipi_csis0_resource[] = { - [0] = { - .start = S5P_PA_MIPI_CSIS0, - .end = S5P_PA_MIPI_CSIS0 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_MIPI_CSIS0, - .end = IRQ_MIPI_CSIS0, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device s5p_device_mipi_csis0 = { - .name = "s5p-mipi-csis", - .id = 0, - .num_resources = ARRAY_SIZE(s5p_mipi_csis0_resource), - .resource = s5p_mipi_csis0_resource, -}; diff --git a/arch/arm/plat-s5p/dev-csis1.c b/arch/arm/plat-s5p/dev-csis1.c deleted file mode 100644 index 08b91b58020..00000000000 --- a/arch/arm/plat-s5p/dev-csis1.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd. - * - * S5P series device definition for MIPI-CSIS channel 1 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <mach/map.h> - -static struct resource s5p_mipi_csis1_resource[] = { - [0] = { - .start = S5P_PA_MIPI_CSIS1, - .end = S5P_PA_MIPI_CSIS1 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_MIPI_CSIS1, - .end = IRQ_MIPI_CSIS1, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device s5p_device_mipi_csis1 = { - .name = "s5p-mipi-csis", - .id = 1, - .num_resources = ARRAY_SIZE(s5p_mipi_csis1_resource), - .resource = s5p_mipi_csis1_resource, -}; diff --git a/arch/arm/plat-s5p/dev-ehci.c b/arch/arm/plat-s5p/dev-ehci.c deleted file mode 100644 index 94080fff9e9..00000000000 --- a/arch/arm/plat-s5p/dev-ehci.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Copyright (C) 2011 Samsung Electronics Co.Ltd - * Author: Joonyoung Shim <jy0922.shim@samsung.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/platform_device.h> -#include <mach/irqs.h> -#include <mach/map.h> -#include <plat/devs.h> -#include <plat/ehci.h> -#include <plat/usb-phy.h> - -/* USB EHCI Host Controller registration */ -static struct resource s5p_ehci_resource[] = { - [0] = { - .start = S5P_PA_EHCI, - .end = S5P_PA_EHCI + SZ_256 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_USB_HOST, - .end = IRQ_USB_HOST, - .flags = IORESOURCE_IRQ, - } -}; - -static u64 s5p_device_ehci_dmamask = 0xffffffffUL; - -struct platform_device s5p_device_ehci = { - .name = "s5p-ehci", - .id = -1, - .num_resources = ARRAY_SIZE(s5p_ehci_resource), - .resource = s5p_ehci_resource, - .dev = { - .dma_mask = &s5p_device_ehci_dmamask, - .coherent_dma_mask = 0xffffffffUL - } -}; - -void __init s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd) -{ - struct s5p_ehci_platdata *npd; - - npd = s3c_set_platdata(pd, sizeof(struct s5p_ehci_platdata), - &s5p_device_ehci); - - if (!npd->phy_init) - npd->phy_init = s5p_usb_phy_init; - if (!npd->phy_exit) - npd->phy_exit = s5p_usb_phy_exit; -} diff --git a/arch/arm/plat-s5p/dev-fimc0.c b/arch/arm/plat-s5p/dev-fimc0.c deleted file mode 100644 index 608770fc153..00000000000 --- a/arch/arm/plat-s5p/dev-fimc0.c +++ /dev/null @@ -1,43 +0,0 @@ -/* linux/arch/arm/plat-s5p/dev-fimc0.c - * - * Copyright (c) 2010 Samsung Electronics - * - * Base S5P FIMC0 resource and device definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <mach/map.h> - -static struct resource s5p_fimc0_resource[] = { - [0] = { - .start = S5P_PA_FIMC0, - .end = S5P_PA_FIMC0 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_FIMC0, - .end = IRQ_FIMC0, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 s5p_fimc0_dma_mask = DMA_BIT_MASK(32); - -struct platform_device s5p_device_fimc0 = { - .name = "s5p-fimc", - .id = 0, - .num_resources = ARRAY_SIZE(s5p_fimc0_resource), - .resource = s5p_fimc0_resource, - .dev = { - .dma_mask = &s5p_fimc0_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; diff --git a/arch/arm/plat-s5p/dev-fimc1.c b/arch/arm/plat-s5p/dev-fimc1.c deleted file mode 100644 index 76e3a97a87d..00000000000 --- a/arch/arm/plat-s5p/dev-fimc1.c +++ /dev/null @@ -1,43 +0,0 @@ -/* linux/arch/arm/plat-s5p/dev-fimc1.c - * - * Copyright (c) 2010 Samsung Electronics - * - * Base S5P FIMC1 resource and device definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <mach/map.h> - -static struct resource s5p_fimc1_resource[] = { - [0] = { - .start = S5P_PA_FIMC1, - .end = S5P_PA_FIMC1 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_FIMC1, - .end = IRQ_FIMC1, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 s5p_fimc1_dma_mask = DMA_BIT_MASK(32); - -struct platform_device s5p_device_fimc1 = { - .name = "s5p-fimc", - .id = 1, - .num_resources = ARRAY_SIZE(s5p_fimc1_resource), - .resource = s5p_fimc1_resource, - .dev = { - .dma_mask = &s5p_fimc1_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; diff --git a/arch/arm/plat-s5p/dev-fimc2.c b/arch/arm/plat-s5p/dev-fimc2.c deleted file mode 100644 index 24d29816fa2..00000000000 --- a/arch/arm/plat-s5p/dev-fimc2.c +++ /dev/null @@ -1,43 +0,0 @@ -/* linux/arch/arm/plat-s5p/dev-fimc2.c - * - * Copyright (c) 2010 Samsung Electronics - * - * Base S5P FIMC2 resource and device definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <mach/map.h> - -static struct resource s5p_fimc2_resource[] = { - [0] = { - .start = S5P_PA_FIMC2, - .end = S5P_PA_FIMC2 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_FIMC2, - .end = IRQ_FIMC2, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 s5p_fimc2_dma_mask = DMA_BIT_MASK(32); - -struct platform_device s5p_device_fimc2 = { - .name = "s5p-fimc", - .id = 2, - .num_resources = ARRAY_SIZE(s5p_fimc2_resource), - .resource = s5p_fimc2_resource, - .dev = { - .dma_mask = &s5p_fimc2_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; diff --git a/arch/arm/plat-s5p/dev-fimc3.c b/arch/arm/plat-s5p/dev-fimc3.c deleted file mode 100644 index ef31beca386..00000000000 --- a/arch/arm/plat-s5p/dev-fimc3.c +++ /dev/null @@ -1,43 +0,0 @@ -/* linux/arch/arm/plat-s5p/dev-fimc3.c - * - * Copyright (c) 2010 Samsung Electronics - * - * Base S5P FIMC3 resource and device definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <mach/map.h> - -static struct resource s5p_fimc3_resource[] = { - [0] = { - .start = S5P_PA_FIMC3, - .end = S5P_PA_FIMC3 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_FIMC3, - .end = IRQ_FIMC3, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 s5p_fimc3_dma_mask = DMA_BIT_MASK(32); - -struct platform_device s5p_device_fimc3 = { - .name = "s5p-fimc", - .id = 3, - .num_resources = ARRAY_SIZE(s5p_fimc3_resource), - .resource = s5p_fimc3_resource, - .dev = { - .dma_mask = &s5p_fimc3_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; diff --git a/arch/arm/plat-s5p/dev-fimd0.c b/arch/arm/plat-s5p/dev-fimd0.c deleted file mode 100644 index f728bb5abce..00000000000 --- a/arch/arm/plat-s5p/dev-fimd0.c +++ /dev/null @@ -1,67 +0,0 @@ -/* linux/arch/arm/plat-s5p/dev-fimd0.c - * - * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Core file for Samsung Display Controller (FIMD) driver - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/platform_device.h> -#include <linux/fb.h> -#include <linux/gfp.h> -#include <linux/dma-mapping.h> - -#include <mach/irqs.h> -#include <mach/map.h> - -#include <plat/fb.h> -#include <plat/devs.h> -#include <plat/cpu.h> - -static struct resource s5p_fimd0_resource[] = { - [0] = { - .start = S5P_PA_FIMD0, - .end = S5P_PA_FIMD0 + SZ_32K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_FIMD0_VSYNC, - .end = IRQ_FIMD0_VSYNC, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_FIMD0_FIFO, - .end = IRQ_FIMD0_FIFO, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = IRQ_FIMD0_SYSTEM, - .end = IRQ_FIMD0_SYSTEM, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 fimd0_dmamask = DMA_BIT_MASK(32); - -struct platform_device s5p_device_fimd0 = { - .name = "s5p-fb", - .id = 0, - .num_resources = ARRAY_SIZE(s5p_fimd0_resource), - .resource = s5p_fimd0_resource, - .dev = { - .dma_mask = &fimd0_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -void __init s5p_fimd0_set_platdata(struct s3c_fb_platdata *pd) -{ - s3c_set_platdata(pd, sizeof(struct s3c_fb_platdata), - &s5p_device_fimd0); -} diff --git a/arch/arm/plat-s5p/dev-mfc.c b/arch/arm/plat-s5p/dev-mfc.c index 94226a0010f..a30d36b7f61 100644 --- a/arch/arm/plat-s5p/dev-mfc.c +++ b/arch/arm/plat-s5p/dev-mfc.c @@ -22,56 +22,6 @@ #include <plat/irqs.h> #include <plat/mfc.h> -static struct resource s5p_mfc_resource[] = { - [0] = { - .start = S5P_PA_MFC, - .end = S5P_PA_MFC + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_MFC, - .end = IRQ_MFC, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device s5p_device_mfc = { - .name = "s5p-mfc", - .id = -1, - .num_resources = ARRAY_SIZE(s5p_mfc_resource), - .resource = s5p_mfc_resource, -}; - -/* - * MFC hardware has 2 memory interfaces which are modelled as two separate - * platform devices to let dma-mapping distinguish between them. - * - * MFC parent device (s5p_device_mfc) must be registered before memory - * interface specific devices (s5p_device_mfc_l and s5p_device_mfc_r). - */ - -static u64 s5p_mfc_dma_mask = DMA_BIT_MASK(32); - -struct platform_device s5p_device_mfc_l = { - .name = "s5p-mfc-l", - .id = -1, - .dev = { - .parent = &s5p_device_mfc.dev, - .dma_mask = &s5p_mfc_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -struct platform_device s5p_device_mfc_r = { - .name = "s5p-mfc-r", - .id = -1, - .dev = { - .parent = &s5p_device_mfc.dev, - .dma_mask = &s5p_mfc_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - struct s5p_mfc_reserved_mem { phys_addr_t base; unsigned long size; diff --git a/arch/arm/plat-s5p/dev-onenand.c b/arch/arm/plat-s5p/dev-onenand.c deleted file mode 100644 index 20336c8f247..00000000000 --- a/arch/arm/plat-s5p/dev-onenand.c +++ /dev/null @@ -1,45 +0,0 @@ -/* linux/arch/arm/plat-s5p/dev-onenand.c - * - * Copyright 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright (c) 2008-2010 Samsung Electronics - * Kyungmin Park <kyungmin.park@samsung.com> - * - * S5P series device definition for OneNAND devices - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/platform_device.h> - -#include <mach/irqs.h> -#include <mach/map.h> - -static struct resource s5p_onenand_resources[] = { - [0] = { - .start = S5P_PA_ONENAND, - .end = S5P_PA_ONENAND + SZ_128K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = S5P_PA_ONENAND_DMA, - .end = S5P_PA_ONENAND_DMA + SZ_8K - 1, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = IRQ_ONENAND_AUDI, - .end = IRQ_ONENAND_AUDI, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device s5p_device_onenand = { - .name = "s5pc110-onenand", - .id = -1, - .num_resources = ARRAY_SIZE(s5p_onenand_resources), - .resource = s5p_onenand_resources, -}; diff --git a/arch/arm/plat-s5p/dev-pmu.c b/arch/arm/plat-s5p/dev-pmu.c deleted file mode 100644 index a08576da72b..00000000000 --- a/arch/arm/plat-s5p/dev-pmu.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * linux/arch/arm/plat-s5p/dev-pmu.c - * - * Copyright (C) 2010 Samsung Electronics Co.Ltd - * Author: Joonyoung Shim <jy0922.shim@samsung.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/platform_device.h> -#include <asm/pmu.h> -#include <mach/irqs.h> - -static struct resource s5p_pmu_resource = { - .start = IRQ_PMU, - .end = IRQ_PMU, - .flags = IORESOURCE_IRQ, -}; - -struct platform_device s5p_device_pmu = { - .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, - .num_resources = 1, - .resource = &s5p_pmu_resource, -}; - -static int __init s5p_pmu_init(void) -{ - platform_device_register(&s5p_device_pmu); - return 0; -} -arch_initcall(s5p_pmu_init); diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h deleted file mode 100644 index bf28fadee7a..00000000000 --- a/arch/arm/plat-s5p/include/plat/pll.h +++ /dev/null @@ -1,153 +0,0 @@ -/* arch/arm/plat-s5p/include/plat/pll.h - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P PLL code - * - * Based on arch/arm/plat-s3c64xx/include/plat/pll.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define PLL45XX_MDIV_MASK (0x3FF) -#define PLL45XX_PDIV_MASK (0x3F) -#define PLL45XX_SDIV_MASK (0x7) -#define PLL45XX_MDIV_SHIFT (16) -#define PLL45XX_PDIV_SHIFT (8) -#define PLL45XX_SDIV_SHIFT (0) - -#include <asm/div64.h> - -enum pll45xx_type_t { - pll_4500, - pll_4502, - pll_4508 -}; - -static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con, - enum pll45xx_type_t pll_type) -{ - u32 mdiv, pdiv, sdiv; - u64 fvco = baseclk; - - mdiv = (pll_con >> PLL45XX_MDIV_SHIFT) & PLL45XX_MDIV_MASK; - pdiv = (pll_con >> PLL45XX_PDIV_SHIFT) & PLL45XX_PDIV_MASK; - sdiv = (pll_con >> PLL45XX_SDIV_SHIFT) & PLL45XX_SDIV_MASK; - - if (pll_type == pll_4508) - sdiv = sdiv - 1; - - fvco *= mdiv; - do_div(fvco, (pdiv << sdiv)); - - return (unsigned long)fvco; -} - -#define PLL46XX_KDIV_MASK (0xFFFF) -#define PLL4650C_KDIV_MASK (0xFFF) -#define PLL46XX_MDIV_MASK (0x1FF) -#define PLL46XX_PDIV_MASK (0x3F) -#define PLL46XX_SDIV_MASK (0x7) -#define PLL46XX_MDIV_SHIFT (16) -#define PLL46XX_PDIV_SHIFT (8) -#define PLL46XX_SDIV_SHIFT (0) - -enum pll46xx_type_t { - pll_4600, - pll_4650, - pll_4650c, -}; - -static inline unsigned long s5p_get_pll46xx(unsigned long baseclk, - u32 pll_con0, u32 pll_con1, - enum pll46xx_type_t pll_type) -{ - unsigned long result; - u32 mdiv, pdiv, sdiv, kdiv; - u64 tmp; - - mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK; - pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK; - sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK; - kdiv = pll_con1 & PLL46XX_KDIV_MASK; - - if (pll_type == pll_4650c) - kdiv = pll_con1 & PLL4650C_KDIV_MASK; - else - kdiv = pll_con1 & PLL46XX_KDIV_MASK; - - tmp = baseclk; - - if (pll_type == pll_4600) { - tmp *= (mdiv << 16) + kdiv; - do_div(tmp, (pdiv << sdiv)); - result = tmp >> 16; - } else { - tmp *= (mdiv << 10) + kdiv; - do_div(tmp, (pdiv << sdiv)); - result = tmp >> 10; - } - - return result; -} - -#define PLL90XX_MDIV_MASK (0xFF) -#define PLL90XX_PDIV_MASK (0x3F) -#define PLL90XX_SDIV_MASK (0x7) -#define PLL90XX_KDIV_MASK (0xffff) -#define PLL90XX_MDIV_SHIFT (16) -#define PLL90XX_PDIV_SHIFT (8) -#define PLL90XX_SDIV_SHIFT (0) -#define PLL90XX_KDIV_SHIFT (0) - -static inline unsigned long s5p_get_pll90xx(unsigned long baseclk, - u32 pll_con, u32 pll_conk) -{ - unsigned long result; - u32 mdiv, pdiv, sdiv, kdiv; - u64 tmp; - - mdiv = (pll_con >> PLL90XX_MDIV_SHIFT) & PLL90XX_MDIV_MASK; - pdiv = (pll_con >> PLL90XX_PDIV_SHIFT) & PLL90XX_PDIV_MASK; - sdiv = (pll_con >> PLL90XX_SDIV_SHIFT) & PLL90XX_SDIV_MASK; - kdiv = pll_conk & PLL90XX_KDIV_MASK; - - /* We need to multiple baseclk by mdiv (the integer part) and kdiv - * which is in 2^16ths, so shift mdiv up (does not overflow) and - * add kdiv before multiplying. The use of tmp is to avoid any - * overflows before shifting bac down into result when multipling - * by the mdiv and kdiv pair. - */ - - tmp = baseclk; - tmp *= (mdiv << 16) + kdiv; - do_div(tmp, (pdiv << sdiv)); - result = tmp >> 16; - - return result; -} - -#define PLL65XX_MDIV_MASK (0x3FF) -#define PLL65XX_PDIV_MASK (0x3F) -#define PLL65XX_SDIV_MASK (0x7) -#define PLL65XX_MDIV_SHIFT (16) -#define PLL65XX_PDIV_SHIFT (8) -#define PLL65XX_SDIV_SHIFT (0) - -static inline unsigned long s5p_get_pll65xx(unsigned long baseclk, u32 pll_con) -{ - u32 mdiv, pdiv, sdiv; - u64 fvco = baseclk; - - mdiv = (pll_con >> PLL65XX_MDIV_SHIFT) & PLL65XX_MDIV_MASK; - pdiv = (pll_con >> PLL65XX_PDIV_SHIFT) & PLL65XX_PDIV_MASK; - sdiv = (pll_con >> PLL65XX_SDIV_SHIFT) & PLL65XX_SDIV_MASK; - - fvco *= mdiv; - do_div(fvco, (pdiv << sdiv)); - - return (unsigned long)fvco; -} diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c index 327ab9f662e..a566523d34e 100644 --- a/arch/arm/plat-s5p/irq-gpioint.c +++ b/arch/arm/plat-s5p/irq-gpioint.c @@ -23,6 +23,8 @@ #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> +#include <asm/mach/irq.h> + #define GPIO_BASE(chip) (((unsigned long)(chip)->base) & 0xFFFFF000u) #define CON_OFFSET 0x700 @@ -35,7 +37,7 @@ struct s5p_gpioint_bank { int start; int nr_groups; int irq; - struct s3c_gpio_chip **chips; + struct samsung_gpio_chip **chips; void (*handler)(unsigned int, struct irq_desc *); }; @@ -81,8 +83,11 @@ static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc) int group, pend_offset, mask_offset; unsigned int pend, mask; + struct irq_chip *chip = irq_get_chip(irq); + chained_irq_enter(chip, desc); + for (group = 0; group < bank->nr_groups; group++) { - struct s3c_gpio_chip *chip = bank->chips[group]; + struct samsung_gpio_chip *chip = bank->chips[group]; if (!chip) continue; @@ -102,29 +107,31 @@ static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc) pend &= ~BIT(offset); } } + chained_irq_exit(chip, desc); } -static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) +static __init int s5p_gpioint_add(struct samsung_gpio_chip *chip) { static int used_gpioint_groups = 0; int group = chip->group; - struct s5p_gpioint_bank *bank = NULL; + struct s5p_gpioint_bank *b, *bank = NULL; struct irq_chip_generic *gc; struct irq_chip_type *ct; if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT) return -ENOMEM; - list_for_each_entry(bank, &banks, list) { - if (group >= bank->start && - group < bank->start + bank->nr_groups) + list_for_each_entry(b, &banks, list) { + if (group >= b->start && group < b->start + b->nr_groups) { + bank = b; break; + } } if (!bank) return -EINVAL; if (!bank->handler) { - bank->chips = kzalloc(sizeof(struct s3c_gpio_chip *) * + bank->chips = kzalloc(sizeof(struct samsung_gpio_chip *) * bank->nr_groups, GFP_KERNEL); if (!bank->chips) return -ENOMEM; @@ -167,7 +174,7 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) int __init s5p_register_gpio_interrupt(int pin) { - struct s3c_gpio_chip *my_chip = s3c_gpiolib_getchip(pin); + struct samsung_gpio_chip *my_chip = samsung_gpiolib_getchip(pin); int offset, group; int ret; diff --git a/arch/arm/mach-exynos4/sleep.S b/arch/arm/plat-s5p/sleep.S index 0984078f1eb..0fd591bfc9f 100644 --- a/arch/arm/mach-exynos4/sleep.S +++ b/arch/arm/plat-s5p/sleep.S @@ -1,15 +1,11 @@ -/* linux/arch/arm/mach-exynos4/sleep.S +/* linux/arch/arm/plat-s5p/sleep.S * * Copyright (c) 2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * EXYNOS4210 power Manager (Suspend-To-RAM) support - * Based on S3C2410 sleep code by: - * Ben Dooks, (c) 2004 Simtec Electronics - * - * Based on PXA/SA1100 sleep code by: - * Nicolas Pitre, (c) 2002 Monta Vista Software Inc - * Cliff Brake, (c) 2001 + * Common S5P Sleep Code + * Based on S3C64XX sleep code by: + * Ben Dooks, (c) 2008 Simtec Electronics * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -28,7 +24,6 @@ #include <linux/linkage.h> #include <asm/assembler.h> -#include <asm/memory.h> .text diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index b3e10659e4b..74714c155e1 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -79,39 +79,12 @@ config SAMSUNG_GPIOLIB_4BIT configuration. GPIOlib shall be compiled only for S3C64XX and S5P series of processors. -config S3C_GPIO_CFG_S3C24XX - bool - help - Internal configuration to enable S3C24XX style GPIO configuration - functions. - config S3C_GPIO_CFG_S3C64XX bool help Internal configuration to enable S3C64XX style GPIO configuration functions. -config S3C_GPIO_PULL_UPDOWN - bool - help - Internal configuration to enable the correct GPIO pull helper - -config S3C_GPIO_PULL_S3C2443 - bool - select S3C_GPIO_PULL_UPDOWN - help - Internal configuration to enable the correct GPIO pull helper for S3C2443-style GPIO - -config S3C_GPIO_PULL_DOWN - bool - help - Internal configuration to enable the correct GPIO pull helper - -config S3C_GPIO_PULL_UP - bool - help - Internal configuration to enable the correct GPIO pull helper - config S5P_GPIO_DRVSTR bool help @@ -300,11 +273,14 @@ config S3C_DMA help Internal configuration for S3C DMA core -config S3C_PL330_DMA +config SAMSUNG_DMADEV bool - select PL330 + select DMADEVICES + select PL330_DMA if (CPU_EXYNOS4210 || CPU_S5PV210 || CPU_S5PC100 || \ + CPU_S5P6450 || CPU_S5P6440) + select ARM_AMBA help - S3C DMA API Driver for PL330 DMAC. + Use DMA device engine for PL330 DMAC. comment "Power management" diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 853764ba8cc..a524fab221d 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -1,4 +1,4 @@ -# arch/arm/plat-s3c64xx/Makefile +# arch/arm/plat-samsung/Makefile # # Copyright 2009 Simtec Electronics # @@ -11,13 +11,10 @@ obj- := # Objects we always build independent of SoC choice -obj-y += init.o +obj-y += init.o cpu.o obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET) += time.o obj-y += clock.o obj-y += pwm-clock.o -obj-y += gpio.o -obj-y += gpio-config.o -obj-y += dev-asocdma.o obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o @@ -32,40 +29,16 @@ obj-$(CONFIG_S3C_ADC) += adc.o obj-y += platformdata.o -obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o -obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o -obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o -obj-$(CONFIG_S3C_DEV_HSMMC3) += dev-hsmmc3.o -obj-$(CONFIG_S3C_DEV_HWMON) += dev-hwmon.o -obj-y += dev-i2c0.o -obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o -obj-$(CONFIG_S3C_DEV_I2C2) += dev-i2c2.o -obj-$(CONFIG_S3C_DEV_I2C3) += dev-i2c3.o -obj-$(CONFIG_S3C_DEV_I2C4) += dev-i2c4.o -obj-$(CONFIG_S3C_DEV_I2C5) += dev-i2c5.o -obj-$(CONFIG_S3C_DEV_I2C6) += dev-i2c6.o -obj-$(CONFIG_S3C_DEV_I2C7) += dev-i2c7.o -obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o +obj-y += devs.o obj-y += dev-uart.o -obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o -obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o -obj-$(CONFIG_S3C_DEV_WDT) += dev-wdt.o -obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o -obj-$(CONFIG_S3C_DEV_ONENAND) += dev-onenand.o -obj-$(CONFIG_S3C_DEV_RTC) += dev-rtc.o - -obj-$(CONFIG_SAMSUNG_DEV_ADC) += dev-adc.o -obj-$(CONFIG_SAMSUNG_DEV_IDE) += dev-ide.o -obj-$(CONFIG_SAMSUNG_DEV_TS) += dev-ts.o -obj-$(CONFIG_SAMSUNG_DEV_KEYPAD) += dev-keypad.o -obj-$(CONFIG_SAMSUNG_DEV_PWM) += dev-pwm.o + obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT) += dev-backlight.o # DMA support -obj-$(CONFIG_S3C_DMA) += dma.o +obj-$(CONFIG_S3C_DMA) += dma.o s3c-dma-ops.o -obj-$(CONFIG_S3C_PL330_DMA) += s3c-pl330.o +obj-$(CONFIG_SAMSUNG_DMADEV) += dma-ops.o # PM support diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c index 302c42670bd..3b4451979d1 100644 --- a/arch/arm/plat-samsung/clock.c +++ b/arch/arm/plat-samsung/clock.c @@ -64,6 +64,17 @@ static LIST_HEAD(clocks); */ DEFINE_SPINLOCK(clocks_lock); +/* Global watchdog clock used by arch_wtd_reset() callback */ +struct clk *s3c2410_wdtclk; +static int __init s3c_wdt_reset_init(void) +{ + s3c2410_wdtclk = clk_get(NULL, "watchdog"); + if (IS_ERR(s3c2410_wdtclk)) + printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__); + return 0; +} +arch_initcall(s3c_wdt_reset_init); + /* enable and disable calls for use with the clk struct */ static int clk_null_enable(struct clk *clk, int enable) diff --git a/arch/arm/plat-samsung/cpu.c b/arch/arm/plat-samsung/cpu.c new file mode 100644 index 00000000000..81c06d44c11 --- /dev/null +++ b/arch/arm/plat-samsung/cpu.c @@ -0,0 +1,58 @@ +/* linux/arch/arm/plat-samsung/cpu.c + * + * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung CPU Support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> + +#include <asm/system.h> + +#include <mach/map.h> +#include <plat/cpu.h> + +unsigned long samsung_cpu_id; +static unsigned int samsung_cpu_rev; + +unsigned int samsung_rev(void) +{ + return samsung_cpu_rev; +} +EXPORT_SYMBOL(samsung_rev); + +void __init s3c24xx_init_cpu(void) +{ + /* nothing here yet */ + + samsung_cpu_rev = 0; +} + +void __init s3c64xx_init_cpu(void) +{ + samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0x118); + if (!samsung_cpu_id) { + /* + * S3C6400 has the ID register in a different place, + * and needs a write before it can be read. + */ + __raw_writel(0x0, S3C_VA_SYS + 0xA1C); + samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0xA1C); + } + + samsung_cpu_rev = 0; +} + +void __init s5p_init_cpu(void __iomem *cpuid_addr) +{ + samsung_cpu_id = __raw_readl(cpuid_addr); + samsung_cpu_rev = samsung_cpu_id & 0xFF; +} diff --git a/arch/arm/plat-samsung/dev-adc.c b/arch/arm/plat-samsung/dev-adc.c deleted file mode 100644 index 9d903d4095e..00000000000 --- a/arch/arm/plat-samsung/dev-adc.c +++ /dev/null @@ -1,46 +0,0 @@ -/* linux/arch/arm/plat-samsung/dev-adc.c - * - * Copyright 2010 Maurus Cuelenaere - * - * S3C64xx series device definition for ADC device - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/platform_device.h> - -#include <mach/irqs.h> -#include <mach/map.h> - -#include <plat/adc.h> -#include <plat/devs.h> -#include <plat/cpu.h> - -static struct resource s3c_adc_resource[] = { - [0] = { - .start = SAMSUNG_PA_ADC, - .end = SAMSUNG_PA_ADC + SZ_256 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_TC, - .end = IRQ_TC, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_ADC, - .end = IRQ_ADC, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device s3c_device_adc = { - .name = "samsung-adc", - .id = -1, - .num_resources = ARRAY_SIZE(s3c_adc_resource), - .resource = s3c_adc_resource, -}; diff --git a/arch/arm/plat-samsung/dev-asocdma.c b/arch/arm/plat-samsung/dev-asocdma.c deleted file mode 100644 index 97e35d3c064..00000000000 --- a/arch/arm/plat-samsung/dev-asocdma.c +++ /dev/null @@ -1,35 +0,0 @@ -/* linux/arch/arm/plat-samsung/dev-asocdma.c - * - * Copyright (c) 2010 Samsung Electronics Co. Ltd - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <plat/devs.h> - -static u64 audio_dmamask = DMA_BIT_MASK(32); - -struct platform_device samsung_asoc_dma = { - .name = "samsung-audio", - .id = -1, - .dev = { - .dma_mask = &audio_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - } -}; -EXPORT_SYMBOL(samsung_asoc_dma); - -struct platform_device samsung_asoc_idma = { - .name = "samsung-idma", - .id = -1, - .dev = { - .dma_mask = &audio_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - } -}; -EXPORT_SYMBOL(samsung_asoc_idma); diff --git a/arch/arm/plat-samsung/dev-fb.c b/arch/arm/plat-samsung/dev-fb.c deleted file mode 100644 index 49a1362fd25..00000000000 --- a/arch/arm/plat-samsung/dev-fb.c +++ /dev/null @@ -1,63 +0,0 @@ -/* linux/arch/arm/plat-s3c/dev-fb.c - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C series device definition for framebuffer device - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/platform_device.h> -#include <linux/fb.h> -#include <linux/gfp.h> - -#include <mach/irqs.h> -#include <mach/map.h> - -#include <plat/fb.h> -#include <plat/devs.h> -#include <plat/cpu.h> - -static struct resource s3c_fb_resource[] = { - [0] = { - .start = S3C_PA_FB, - .end = S3C_PA_FB + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_LCD_VSYNC, - .end = IRQ_LCD_VSYNC, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_LCD_FIFO, - .end = IRQ_LCD_FIFO, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = IRQ_LCD_SYSTEM, - .end = IRQ_LCD_SYSTEM, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device s3c_device_fb = { - .name = "s3c-fb", - .id = -1, - .num_resources = ARRAY_SIZE(s3c_fb_resource), - .resource = s3c_fb_resource, - .dev.dma_mask = &s3c_device_fb.dev.coherent_dma_mask, - .dev.coherent_dma_mask = 0xffffffffUL, -}; - -void __init s3c_fb_set_platdata(struct s3c_fb_platdata *pd) -{ - s3c_set_platdata(pd, sizeof(struct s3c_fb_platdata), - &s3c_device_fb); -} diff --git a/arch/arm/plat-samsung/dev-hsmmc.c b/arch/arm/plat-samsung/dev-hsmmc.c deleted file mode 100644 index db7a65c7f12..00000000000 --- a/arch/arm/plat-samsung/dev-hsmmc.c +++ /dev/null @@ -1,79 +0,0 @@ -/* linux/arch/arm/plat-s3c/dev-hsmmc.c - * - * Copyright (c) 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C series device definition for hsmmc devices - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/mmc/host.h> - -#include <mach/map.h> -#include <plat/sdhci.h> -#include <plat/devs.h> -#include <plat/cpu.h> - -#define S3C_SZ_HSMMC (0x1000) - -static struct resource s3c_hsmmc_resource[] = { - [0] = { - .start = S3C_PA_HSMMC0, - .end = S3C_PA_HSMMC0 + S3C_SZ_HSMMC - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_HSMMC0, - .end = IRQ_HSMMC0, - .flags = IORESOURCE_IRQ, - } -}; - -static u64 s3c_device_hsmmc_dmamask = 0xffffffffUL; - -struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata = { - .max_width = 4, - .host_caps = (MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), - .clk_type = S3C_SDHCI_CLK_DIV_INTERNAL, -}; - -struct platform_device s3c_device_hsmmc0 = { - .name = "s3c-sdhci", - .id = 0, - .num_resources = ARRAY_SIZE(s3c_hsmmc_resource), - .resource = s3c_hsmmc_resource, - .dev = { - .dma_mask = &s3c_device_hsmmc_dmamask, - .coherent_dma_mask = 0xffffffffUL, - .platform_data = &s3c_hsmmc0_def_platdata, - }, -}; - -void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd) -{ - struct s3c_sdhci_platdata *set = &s3c_hsmmc0_def_platdata; - - set->cd_type = pd->cd_type; - set->ext_cd_init = pd->ext_cd_init; - set->ext_cd_cleanup = pd->ext_cd_cleanup; - set->ext_cd_gpio = pd->ext_cd_gpio; - set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert; - - if (pd->max_width) - set->max_width = pd->max_width; - if (pd->cfg_gpio) - set->cfg_gpio = pd->cfg_gpio; - if (pd->cfg_card) - set->cfg_card = pd->cfg_card; - if (pd->host_caps) - set->host_caps |= pd->host_caps; - if (pd->clk_type) - set->clk_type = pd->clk_type; -} diff --git a/arch/arm/plat-samsung/dev-hsmmc1.c b/arch/arm/plat-samsung/dev-hsmmc1.c deleted file mode 100644 index 2497321f08d..00000000000 --- a/arch/arm/plat-samsung/dev-hsmmc1.c +++ /dev/null @@ -1,79 +0,0 @@ -/* linux/arch/arm/plat-s3c/dev-hsmmc1.c - * - * Copyright (c) 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C series device definition for hsmmc device 1 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/mmc/host.h> - -#include <mach/map.h> -#include <plat/sdhci.h> -#include <plat/devs.h> -#include <plat/cpu.h> - -#define S3C_SZ_HSMMC (0x1000) - -static struct resource s3c_hsmmc1_resource[] = { - [0] = { - .start = S3C_PA_HSMMC1, - .end = S3C_PA_HSMMC1 + S3C_SZ_HSMMC - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_HSMMC1, - .end = IRQ_HSMMC1, - .flags = IORESOURCE_IRQ, - } -}; - -static u64 s3c_device_hsmmc1_dmamask = 0xffffffffUL; - -struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata = { - .max_width = 4, - .host_caps = (MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), - .clk_type = S3C_SDHCI_CLK_DIV_INTERNAL, -}; - -struct platform_device s3c_device_hsmmc1 = { - .name = "s3c-sdhci", - .id = 1, - .num_resources = ARRAY_SIZE(s3c_hsmmc1_resource), - .resource = s3c_hsmmc1_resource, - .dev = { - .dma_mask = &s3c_device_hsmmc1_dmamask, - .coherent_dma_mask = 0xffffffffUL, - .platform_data = &s3c_hsmmc1_def_platdata, - }, -}; - -void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd) -{ - struct s3c_sdhci_platdata *set = &s3c_hsmmc1_def_platdata; - - set->cd_type = pd->cd_type; - set->ext_cd_init = pd->ext_cd_init; - set->ext_cd_cleanup = pd->ext_cd_cleanup; - set->ext_cd_gpio = pd->ext_cd_gpio; - set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert; - - if (pd->max_width) - set->max_width = pd->max_width; - if (pd->cfg_gpio) - set->cfg_gpio = pd->cfg_gpio; - if (pd->cfg_card) - set->cfg_card = pd->cfg_card; - if (pd->host_caps) - set->host_caps |= pd->host_caps; - if (pd->clk_type) - set->clk_type = pd->clk_type; -} diff --git a/arch/arm/plat-samsung/dev-hsmmc2.c b/arch/arm/plat-samsung/dev-hsmmc2.c deleted file mode 100644 index f60aedba417..00000000000 --- a/arch/arm/plat-samsung/dev-hsmmc2.c +++ /dev/null @@ -1,80 +0,0 @@ -/* linux/arch/arm/plat-s3c/dev-hsmmc2.c - * - * Copyright (c) 2009 Samsung Electronics - * Copyright (c) 2009 Maurus Cuelenaere - * - * Based on arch/arm/plat-s3c/dev-hsmmc1.c - * original file Copyright (c) 2008 Simtec Electronics - * - * S3C series device definition for hsmmc device 2 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/mmc/host.h> - -#include <mach/map.h> -#include <plat/sdhci.h> -#include <plat/devs.h> - -#define S3C_SZ_HSMMC (0x1000) - -static struct resource s3c_hsmmc2_resource[] = { - [0] = { - .start = S3C_PA_HSMMC2, - .end = S3C_PA_HSMMC2 + S3C_SZ_HSMMC - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_HSMMC2, - .end = IRQ_HSMMC2, - .flags = IORESOURCE_IRQ, - } -}; - -static u64 s3c_device_hsmmc2_dmamask = 0xffffffffUL; - -struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata = { - .max_width = 4, - .host_caps = (MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), - .clk_type = S3C_SDHCI_CLK_DIV_INTERNAL, -}; - -struct platform_device s3c_device_hsmmc2 = { - .name = "s3c-sdhci", - .id = 2, - .num_resources = ARRAY_SIZE(s3c_hsmmc2_resource), - .resource = s3c_hsmmc2_resource, - .dev = { - .dma_mask = &s3c_device_hsmmc2_dmamask, - .coherent_dma_mask = 0xffffffffUL, - .platform_data = &s3c_hsmmc2_def_platdata, - }, -}; - -void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd) -{ - struct s3c_sdhci_platdata *set = &s3c_hsmmc2_def_platdata; - - set->cd_type = pd->cd_type; - set->ext_cd_init = pd->ext_cd_init; - set->ext_cd_cleanup = pd->ext_cd_cleanup; - set->ext_cd_gpio = pd->ext_cd_gpio; - set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert; - - if (pd->max_width) - set->max_width = pd->max_width; - if (pd->cfg_gpio) - set->cfg_gpio = pd->cfg_gpio; - if (pd->cfg_card) - set->cfg_card = pd->cfg_card; - if (pd->host_caps) - set->host_caps |= pd->host_caps; - if (pd->clk_type) - set->clk_type = pd->clk_type; -} diff --git a/arch/arm/plat-samsung/dev-hsmmc3.c b/arch/arm/plat-samsung/dev-hsmmc3.c deleted file mode 100644 index ede776f20e6..00000000000 --- a/arch/arm/plat-samsung/dev-hsmmc3.c +++ /dev/null @@ -1,83 +0,0 @@ -/* linux/arch/arm/plat-samsung/dev-hsmmc3.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright (c) 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * Based on arch/arm/plat-samsung/dev-hsmmc1.c - * - * Samsung device definition for hsmmc device 3 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/mmc/host.h> - -#include <mach/map.h> -#include <plat/sdhci.h> -#include <plat/devs.h> - -#define S3C_SZ_HSMMC (0x1000) - -static struct resource s3c_hsmmc3_resource[] = { - [0] = { - .start = S3C_PA_HSMMC3, - .end = S3C_PA_HSMMC3 + S3C_SZ_HSMMC - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_HSMMC3, - .end = IRQ_HSMMC3, - .flags = IORESOURCE_IRQ, - } -}; - -static u64 s3c_device_hsmmc3_dmamask = 0xffffffffUL; - -struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata = { - .max_width = 4, - .host_caps = (MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), - .clk_type = S3C_SDHCI_CLK_DIV_INTERNAL, -}; - -struct platform_device s3c_device_hsmmc3 = { - .name = "s3c-sdhci", - .id = 3, - .num_resources = ARRAY_SIZE(s3c_hsmmc3_resource), - .resource = s3c_hsmmc3_resource, - .dev = { - .dma_mask = &s3c_device_hsmmc3_dmamask, - .coherent_dma_mask = 0xffffffffUL, - .platform_data = &s3c_hsmmc3_def_platdata, - }, -}; - -void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd) -{ - struct s3c_sdhci_platdata *set = &s3c_hsmmc3_def_platdata; - - set->cd_type = pd->cd_type; - set->ext_cd_init = pd->ext_cd_init; - set->ext_cd_cleanup = pd->ext_cd_cleanup; - set->ext_cd_gpio = pd->ext_cd_gpio; - set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert; - - if (pd->max_width) - set->max_width = pd->max_width; - if (pd->cfg_gpio) - set->cfg_gpio = pd->cfg_gpio; - if (pd->cfg_card) - set->cfg_card = pd->cfg_card; - if (pd->host_caps) - set->host_caps |= pd->host_caps; - if (pd->clk_type) - set->clk_type = pd->clk_type; -} diff --git a/arch/arm/plat-samsung/dev-hwmon.c b/arch/arm/plat-samsung/dev-hwmon.c deleted file mode 100644 index c91a79ce8f3..00000000000 --- a/arch/arm/plat-samsung/dev-hwmon.c +++ /dev/null @@ -1,32 +0,0 @@ -/* linux/arch/arm/plat-samsung/dev-hwmon.c - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * Adapted for HWMON by Maurus Cuelenaere - * - * Samsung series device definition for HWMON - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/platform_device.h> - -#include <plat/devs.h> -#include <plat/hwmon.h> - -struct platform_device s3c_device_hwmon = { - .name = "s3c-hwmon", - .id = -1, - .dev.parent = &s3c_device_adc.dev, -}; - -void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd) -{ - s3c_set_platdata(pd, sizeof(struct s3c_hwmon_pdata), - &s3c_device_hwmon); -} diff --git a/arch/arm/plat-samsung/dev-i2c0.c b/arch/arm/plat-samsung/dev-i2c0.c deleted file mode 100644 index f8251f5098b..00000000000 --- a/arch/arm/plat-samsung/dev-i2c0.c +++ /dev/null @@ -1,70 +0,0 @@ -/* linux/arch/arm/plat-s3c/dev-i2c0.c - * - * Copyright 2008-2009 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C series device definition for i2c device 0 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/gfp.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/platform_device.h> - -#include <mach/irqs.h> -#include <mach/map.h> - -#include <plat/regs-iic.h> -#include <plat/iic.h> -#include <plat/devs.h> -#include <plat/cpu.h> - -static struct resource s3c_i2c_resource[] = { - [0] = { - .start = S3C_PA_IIC, - .end = S3C_PA_IIC + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_IIC, - .end = IRQ_IIC, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device s3c_device_i2c0 = { - .name = "s3c2410-i2c", -#ifdef CONFIG_S3C_DEV_I2C1 - .id = 0, -#else - .id = -1, -#endif - .num_resources = ARRAY_SIZE(s3c_i2c_resource), - .resource = s3c_i2c_resource, -}; - -struct s3c2410_platform_i2c default_i2c_data __initdata = { - .flags = 0, - .slave_addr = 0x10, - .frequency = 100*1000, - .sda_delay = 100, -}; - -void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd) -{ - struct s3c2410_platform_i2c *npd; - - if (!pd) - pd = &default_i2c_data; - - npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), - &s3c_device_i2c0); - - if (!npd->cfg_gpio) - npd->cfg_gpio = s3c_i2c0_cfg_gpio; -} diff --git a/arch/arm/plat-samsung/dev-i2c1.c b/arch/arm/plat-samsung/dev-i2c1.c deleted file mode 100644 index 3b7c7bec1cf..00000000000 --- a/arch/arm/plat-samsung/dev-i2c1.c +++ /dev/null @@ -1,61 +0,0 @@ -/* linux/arch/arm/plat-s3c/dev-i2c1.c - * - * Copyright 2008-2009 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C series device definition for i2c device 1 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/gfp.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/platform_device.h> - -#include <mach/irqs.h> -#include <mach/map.h> - -#include <plat/regs-iic.h> -#include <plat/iic.h> -#include <plat/devs.h> -#include <plat/cpu.h> - -static struct resource s3c_i2c_resource[] = { - [0] = { - .start = S3C_PA_IIC1, - .end = S3C_PA_IIC1 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_IIC1, - .end = IRQ_IIC1, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device s3c_device_i2c1 = { - .name = "s3c2410-i2c", - .id = 1, - .num_resources = ARRAY_SIZE(s3c_i2c_resource), - .resource = s3c_i2c_resource, -}; - -void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd) -{ - struct s3c2410_platform_i2c *npd; - - if (!pd) { - pd = &default_i2c_data; - pd->bus_num = 1; - } - - npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), - &s3c_device_i2c1); - - if (!npd->cfg_gpio) - npd->cfg_gpio = s3c_i2c1_cfg_gpio; -} diff --git a/arch/arm/plat-samsung/dev-i2c2.c b/arch/arm/plat-samsung/dev-i2c2.c deleted file mode 100644 index 07e9fd0b1b8..00000000000 --- a/arch/arm/plat-samsung/dev-i2c2.c +++ /dev/null @@ -1,62 +0,0 @@ -/* linux/arch/arm/plat-s3c/dev-i2c2.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S3C series device definition for i2c device 2 - * - * Based on plat-samsung/dev-i2c0.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/gfp.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/platform_device.h> - -#include <mach/irqs.h> -#include <mach/map.h> - -#include <plat/regs-iic.h> -#include <plat/iic.h> -#include <plat/devs.h> -#include <plat/cpu.h> - -static struct resource s3c_i2c_resource[] = { - [0] = { - .start = S3C_PA_IIC2, - .end = S3C_PA_IIC2 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_IIC2, - .end = IRQ_IIC2, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device s3c_device_i2c2 = { - .name = "s3c2410-i2c", - .id = 2, - .num_resources = ARRAY_SIZE(s3c_i2c_resource), - .resource = s3c_i2c_resource, -}; - -void __init s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *pd) -{ - struct s3c2410_platform_i2c *npd; - - if (!pd) { - pd = &default_i2c_data; - pd->bus_num = 2; - } - - npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), - &s3c_device_i2c2); - - if (!npd->cfg_gpio) - npd->cfg_gpio = s3c_i2c2_cfg_gpio; -} diff --git a/arch/arm/plat-samsung/dev-i2c3.c b/arch/arm/plat-samsung/dev-i2c3.c deleted file mode 100644 index d48efa93c6e..00000000000 --- a/arch/arm/plat-samsung/dev-i2c3.c +++ /dev/null @@ -1,60 +0,0 @@ -/* linux/arch/arm/plat-samsung/dev-i2c3.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P series device definition for i2c device 3 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/gfp.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/platform_device.h> - -#include <mach/irqs.h> -#include <mach/map.h> - -#include <plat/regs-iic.h> -#include <plat/iic.h> -#include <plat/devs.h> -#include <plat/cpu.h> - -static struct resource s3c_i2c_resource[] = { - [0] = { - .start = S3C_PA_IIC3, - .end = S3C_PA_IIC3 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_IIC3, - .end = IRQ_IIC3, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device s3c_device_i2c3 = { - .name = "s3c2440-i2c", - .id = 3, - .num_resources = ARRAY_SIZE(s3c_i2c_resource), - .resource = s3c_i2c_resource, -}; - -void __init s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *pd) -{ - struct s3c2410_platform_i2c *npd; - - if (!pd) { - pd = &default_i2c_data; - pd->bus_num = 3; - } - - npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), - &s3c_device_i2c3); - - if (!npd->cfg_gpio) - npd->cfg_gpio = s3c_i2c3_cfg_gpio; -} diff --git a/arch/arm/plat-samsung/dev-i2c4.c b/arch/arm/plat-samsung/dev-i2c4.c deleted file mode 100644 index 07e26444efe..00000000000 --- a/arch/arm/plat-samsung/dev-i2c4.c +++ /dev/null @@ -1,60 +0,0 @@ -/* linux/arch/arm/plat-samsung/dev-i2c4.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P series device definition for i2c device 3 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/gfp.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/platform_device.h> - -#include <mach/irqs.h> -#include <mach/map.h> - -#include <plat/regs-iic.h> -#include <plat/iic.h> -#include <plat/devs.h> -#include <plat/cpu.h> - -static struct resource s3c_i2c_resource[] = { - [0] = { - .start = S3C_PA_IIC4, - .end = S3C_PA_IIC4 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_IIC4, - .end = IRQ_IIC4, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device s3c_device_i2c4 = { - .name = "s3c2440-i2c", - .id = 4, - .num_resources = ARRAY_SIZE(s3c_i2c_resource), - .resource = s3c_i2c_resource, -}; - -void __init s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *pd) -{ - struct s3c2410_platform_i2c *npd; - - if (!pd) { - pd = &default_i2c_data; - pd->bus_num = 4; - } - - npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), - &s3c_device_i2c4); - - if (!npd->cfg_gpio) - npd->cfg_gpio = s3c_i2c4_cfg_gpio; -} diff --git a/arch/arm/plat-samsung/dev-i2c5.c b/arch/arm/plat-samsung/dev-i2c5.c deleted file mode 100644 index f4965578456..00000000000 --- a/arch/arm/plat-samsung/dev-i2c5.c +++ /dev/null @@ -1,60 +0,0 @@ -/* linux/arch/arm/plat-samsung/dev-i2c3.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P series device definition for i2c device 3 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/gfp.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/platform_device.h> - -#include <mach/irqs.h> -#include <mach/map.h> - -#include <plat/regs-iic.h> -#include <plat/iic.h> -#include <plat/devs.h> -#include <plat/cpu.h> - -static struct resource s3c_i2c_resource[] = { - [0] = { - .start = S3C_PA_IIC5, - .end = S3C_PA_IIC5 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_IIC5, - .end = IRQ_IIC5, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device s3c_device_i2c5 = { - .name = "s3c2440-i2c", - .id = 5, - .num_resources = ARRAY_SIZE(s3c_i2c_resource), - .resource = s3c_i2c_resource, -}; - -void __init s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *pd) -{ - struct s3c2410_platform_i2c *npd; - - if (!pd) { - pd = &default_i2c_data; - pd->bus_num = 5; - } - - npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), - &s3c_device_i2c5); - - if (!npd->cfg_gpio) - npd->cfg_gpio = s3c_i2c5_cfg_gpio; -} diff --git a/arch/arm/plat-samsung/dev-i2c6.c b/arch/arm/plat-samsung/dev-i2c6.c deleted file mode 100644 index 141d799944e..00000000000 --- a/arch/arm/plat-samsung/dev-i2c6.c +++ /dev/null @@ -1,60 +0,0 @@ -/* linux/arch/arm/plat-samsung/dev-i2c6.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P series device definition for i2c device 6 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/gfp.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/platform_device.h> - -#include <mach/irqs.h> -#include <mach/map.h> - -#include <plat/regs-iic.h> -#include <plat/iic.h> -#include <plat/devs.h> -#include <plat/cpu.h> - -static struct resource s3c_i2c_resource[] = { - [0] = { - .start = S3C_PA_IIC6, - .end = S3C_PA_IIC6 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_IIC6, - .end = IRQ_IIC6, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device s3c_device_i2c6 = { - .name = "s3c2440-i2c", - .id = 6, - .num_resources = ARRAY_SIZE(s3c_i2c_resource), - .resource = s3c_i2c_resource, -}; - -void __init s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *pd) -{ - struct s3c2410_platform_i2c *npd; - - if (!pd) { - pd = &default_i2c_data; - pd->bus_num = 6; - } - - npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), - &s3c_device_i2c6); - - if (!npd->cfg_gpio) - npd->cfg_gpio = s3c_i2c6_cfg_gpio; -} diff --git a/arch/arm/plat-samsung/dev-i2c7.c b/arch/arm/plat-samsung/dev-i2c7.c deleted file mode 100644 index 9dddcd1665b..00000000000 --- a/arch/arm/plat-samsung/dev-i2c7.c +++ /dev/null @@ -1,60 +0,0 @@ -/* linux/arch/arm/plat-samsung/dev-i2c7.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P series device definition for i2c device 7 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/gfp.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/platform_device.h> - -#include <mach/irqs.h> -#include <mach/map.h> - -#include <plat/regs-iic.h> -#include <plat/iic.h> -#include <plat/devs.h> -#include <plat/cpu.h> - -static struct resource s3c_i2c_resource[] = { - [0] = { - .start = S3C_PA_IIC7, - .end = S3C_PA_IIC7 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_IIC7, - .end = IRQ_IIC7, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device s3c_device_i2c7 = { - .name = "s3c2440-i2c", - .id = 7, - .num_resources = ARRAY_SIZE(s3c_i2c_resource), - .resource = s3c_i2c_resource, -}; - -void __init s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *pd) -{ - struct s3c2410_platform_i2c *npd; - - if (!pd) { - pd = &default_i2c_data; - pd->bus_num = 7; - } - - npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), - &s3c_device_i2c7); - - if (!npd->cfg_gpio) - npd->cfg_gpio = s3c_i2c7_cfg_gpio; -} diff --git a/arch/arm/plat-samsung/dev-ide.c b/arch/arm/plat-samsung/dev-ide.c deleted file mode 100644 index b497982795a..00000000000 --- a/arch/arm/plat-samsung/dev-ide.c +++ /dev/null @@ -1,44 +0,0 @@ -/* linux/arch/arm/plat-samsung/dev-ide.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Samsung CF-ATA device definition. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> - -#include <mach/map.h> -#include <plat/ata.h> -#include <plat/devs.h> - -static struct resource s3c_cfcon_resource[] = { - [0] = { - .start = SAMSUNG_PA_CFCON, - .end = SAMSUNG_PA_CFCON + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_CFCON, - .end = IRQ_CFCON, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device s3c_device_cfcon = { - .id = 0, - .num_resources = ARRAY_SIZE(s3c_cfcon_resource), - .resource = s3c_cfcon_resource, -}; - -void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata) -{ - s3c_set_platdata(pdata, sizeof(struct s3c_ide_platdata), - &s3c_device_cfcon); -} diff --git a/arch/arm/plat-samsung/dev-keypad.c b/arch/arm/plat-samsung/dev-keypad.c deleted file mode 100644 index 677c2d731b6..00000000000 --- a/arch/arm/plat-samsung/dev-keypad.c +++ /dev/null @@ -1,50 +0,0 @@ -/* - * linux/arch/arm/plat-samsung/dev-keypad.c - * - * Copyright (C) 2010 Samsung Electronics Co.Ltd - * Author: Joonyoung Shim <jy0922.shim@samsung.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/platform_device.h> -#include <mach/irqs.h> -#include <mach/map.h> -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/keypad.h> - -static struct resource samsung_keypad_resources[] = { - [0] = { - .start = SAMSUNG_PA_KEYPAD, - .end = SAMSUNG_PA_KEYPAD + 0x20 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_KEYPAD, - .end = IRQ_KEYPAD, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device samsung_device_keypad = { - .name = "samsung-keypad", - .id = -1, - .num_resources = ARRAY_SIZE(samsung_keypad_resources), - .resource = samsung_keypad_resources, -}; - -void __init samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd) -{ - struct samsung_keypad_platdata *npd; - - npd = s3c_set_platdata(pd, sizeof(struct samsung_keypad_platdata), - &samsung_device_keypad); - - if (!npd->cfg_gpio) - npd->cfg_gpio = samsung_keypad_cfg_gpio; -} diff --git a/arch/arm/plat-samsung/dev-nand.c b/arch/arm/plat-samsung/dev-nand.c deleted file mode 100644 index b8e30ec6ac2..00000000000 --- a/arch/arm/plat-samsung/dev-nand.c +++ /dev/null @@ -1,125 +0,0 @@ -/* - * S3C series device definition for nand device - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/gfp.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -#include <mach/map.h> -#include <plat/devs.h> -#include <plat/nand.h> - -static struct resource s3c_nand_resource[] = { - [0] = { - .start = S3C_PA_NAND, - .end = S3C_PA_NAND + SZ_1M, - .flags = IORESOURCE_MEM, - } -}; - -struct platform_device s3c_device_nand = { - .name = "s3c2410-nand", - .id = -1, - .num_resources = ARRAY_SIZE(s3c_nand_resource), - .resource = s3c_nand_resource, -}; - -EXPORT_SYMBOL(s3c_device_nand); - -/** - * s3c_nand_copy_set() - copy nand set data - * @set: The new structure, directly copied from the old. - * - * Copy all the fields from the NAND set field from what is probably __initdata - * to new kernel memory. The code returns 0 if the copy happened correctly or - * an error code for the calling function to display. - * - * Note, we currently do not try and look to see if we've already copied the - * data in a previous set. - */ -static int __init s3c_nand_copy_set(struct s3c2410_nand_set *set) -{ - void *ptr; - int size; - - size = sizeof(struct mtd_partition) * set->nr_partitions; - if (size) { - ptr = kmemdup(set->partitions, size, GFP_KERNEL); - set->partitions = ptr; - - if (!ptr) - return -ENOMEM; - } - - if (set->nr_map && set->nr_chips) { - size = sizeof(int) * set->nr_chips; - ptr = kmemdup(set->nr_map, size, GFP_KERNEL); - set->nr_map = ptr; - - if (!ptr) - return -ENOMEM; - } - - if (set->ecc_layout) { - ptr = kmemdup(set->ecc_layout, - sizeof(struct nand_ecclayout), GFP_KERNEL); - set->ecc_layout = ptr; - - if (!ptr) - return -ENOMEM; - } - - return 0; -} - -void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand) -{ - struct s3c2410_platform_nand *npd; - int size; - int ret; - - /* note, if we get a failure in allocation, we simply drop out of the - * function. If there is so little memory available at initialisation - * time then there is little chance the system is going to run. - */ - - npd = s3c_set_platdata(nand, sizeof(struct s3c2410_platform_nand), - &s3c_device_nand); - if (!npd) - return; - - /* now see if we need to copy any of the nand set data */ - - size = sizeof(struct s3c2410_nand_set) * npd->nr_sets; - if (size) { - struct s3c2410_nand_set *from = npd->sets; - struct s3c2410_nand_set *to; - int i; - - to = kmemdup(from, size, GFP_KERNEL); - npd->sets = to; /* set, even if we failed */ - - if (!to) { - printk(KERN_ERR "%s: no memory for sets\n", __func__); - return; - } - - for (i = 0; i < npd->nr_sets; i++) { - ret = s3c_nand_copy_set(to); - if (ret) { - printk(KERN_ERR "%s: failed to copy set %d\n", - __func__, i); - return; - } - to++; - } - } -} diff --git a/arch/arm/plat-samsung/dev-onenand.c b/arch/arm/plat-samsung/dev-onenand.c deleted file mode 100644 index f54ae71f0cd..00000000000 --- a/arch/arm/plat-samsung/dev-onenand.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * linux/arch/arm/plat-samsung/dev-onenand.c - * - * Copyright (c) 2008-2010 Samsung Electronics - * Kyungmin Park <kyungmin.park@samsung.com> - * - * S3C64XX/S5PC100 series device definition for OneNAND devices - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/platform_device.h> - -#include <mach/irqs.h> -#include <mach/map.h> - -static struct resource s3c_onenand_resources[] = { - [0] = { - .start = S3C_PA_ONENAND, - .end = S3C_PA_ONENAND + 0x400 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = S3C_PA_ONENAND_BUF, - .end = S3C_PA_ONENAND_BUF + S3C_SZ_ONENAND_BUF - 1, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = IRQ_ONENAND, - .end = IRQ_ONENAND, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device s3c_device_onenand = { - .name = "samsung-onenand", - .id = 0, - .num_resources = ARRAY_SIZE(s3c_onenand_resources), - .resource = s3c_onenand_resources, -}; diff --git a/arch/arm/plat-samsung/dev-pwm.c b/arch/arm/plat-samsung/dev-pwm.c deleted file mode 100644 index dab47b0e190..00000000000 --- a/arch/arm/plat-samsung/dev-pwm.c +++ /dev/null @@ -1,53 +0,0 @@ -/* linux/arch/arm/plat-samsung/dev-pwm.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright (c) 2007 Ben Dooks - * Copyright (c) 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org> - * - * S3C series device definition for the PWM timer - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/platform_device.h> - -#include <mach/irqs.h> - -#include <plat/devs.h> - -#define TIMER_RESOURCE_SIZE (1) - -#define TIMER_RESOURCE(_tmr, _irq) \ - (struct resource [TIMER_RESOURCE_SIZE]) { \ - [0] = { \ - .start = _irq, \ - .end = _irq, \ - .flags = IORESOURCE_IRQ \ - } \ - } - -#define DEFINE_S3C_TIMER(_tmr_no, _irq) \ - .name = "s3c24xx-pwm", \ - .id = _tmr_no, \ - .num_resources = TIMER_RESOURCE_SIZE, \ - .resource = TIMER_RESOURCE(_tmr_no, _irq), \ - -/* - * since we already have an static mapping for the timer, - * we do not bother setting any IO resource for the base. - */ - -struct platform_device s3c_device_timer[] = { - [0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) }, - [1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) }, - [2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) }, - [3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) }, - [4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) }, -}; -EXPORT_SYMBOL(s3c_device_timer); diff --git a/arch/arm/plat-samsung/dev-rtc.c b/arch/arm/plat-samsung/dev-rtc.c deleted file mode 100644 index bf4e2267333..00000000000 --- a/arch/arm/plat-samsung/dev-rtc.c +++ /dev/null @@ -1,43 +0,0 @@ -/* linux/arch/arm/plat-samsung/dev-rtc.c - * - * Copyright 2009 by Maurus Cuelenaere <mcuelenaere@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/platform_device.h> - -#include <mach/irqs.h> -#include <mach/map.h> - -#include <plat/devs.h> - -static struct resource s3c_rtc_resource[] = { - [0] = { - .start = S3C_PA_RTC, - .end = S3C_PA_RTC + 0xff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_RTC_ALARM, - .end = IRQ_RTC_ALARM, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_RTC_TIC, - .end = IRQ_RTC_TIC, - .flags = IORESOURCE_IRQ - } -}; - -struct platform_device s3c_device_rtc = { - .name = "s3c64xx-rtc", - .id = -1, - .num_resources = ARRAY_SIZE(s3c_rtc_resource), - .resource = s3c_rtc_resource, -}; -EXPORT_SYMBOL(s3c_device_rtc); diff --git a/arch/arm/plat-samsung/dev-ts.c b/arch/arm/plat-samsung/dev-ts.c deleted file mode 100644 index 82543f0248a..00000000000 --- a/arch/arm/plat-samsung/dev-ts.c +++ /dev/null @@ -1,50 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/dev-ts.c - * - * Copyright (c) 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org> - * - * Adapted by Maurus Cuelenaere for s3c64xx - * - * S3C64XX series device definition for touchscreen device - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/platform_device.h> - -#include <mach/irqs.h> -#include <mach/map.h> - -#include <plat/devs.h> -#include <plat/ts.h> - -static struct resource s3c_ts_resource[] = { - [0] = { - .start = SAMSUNG_PA_ADC, - .end = SAMSUNG_PA_ADC + SZ_256 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_TC, - .end = IRQ_TC, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device s3c_device_ts = { - .name = "s3c64xx-ts", - .id = -1, - .num_resources = ARRAY_SIZE(s3c_ts_resource), - .resource = s3c_ts_resource, -}; - -void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd) -{ - s3c_set_platdata(pd, sizeof(struct s3c2410_ts_mach_info), - &s3c_device_ts); -} diff --git a/arch/arm/plat-samsung/dev-usb-hsotg.c b/arch/arm/plat-samsung/dev-usb-hsotg.c deleted file mode 100644 index 33a844ab691..00000000000 --- a/arch/arm/plat-samsung/dev-usb-hsotg.c +++ /dev/null @@ -1,48 +0,0 @@ -/* linux/arch/arm/plat-s3c/dev-usb-hsotg.c - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C series device definition for USB high-speed UDC/OtG block - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> - -#include <mach/irqs.h> -#include <mach/map.h> - -#include <plat/devs.h> - -static struct resource s3c_usb_hsotg_resources[] = { - [0] = { - .start = S3C_PA_USB_HSOTG, - .end = S3C_PA_USB_HSOTG + 0x10000 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_OTG, - .end = IRQ_OTG, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 s3c_hsotg_dmamask = DMA_BIT_MASK(32); - -struct platform_device s3c_device_usb_hsotg = { - .name = "s3c-hsotg", - .id = -1, - .num_resources = ARRAY_SIZE(s3c_usb_hsotg_resources), - .resource = s3c_usb_hsotg_resources, - .dev = { - .dma_mask = &s3c_hsotg_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; diff --git a/arch/arm/plat-samsung/dev-usb.c b/arch/arm/plat-samsung/dev-usb.c deleted file mode 100644 index 33fbaa96770..00000000000 --- a/arch/arm/plat-samsung/dev-usb.c +++ /dev/null @@ -1,65 +0,0 @@ -/* linux/arch/arm/plat-s3c/dev-usb.c - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C series device definition for USB host - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/gfp.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/platform_device.h> - -#include <mach/irqs.h> -#include <mach/map.h> - -#include <plat/devs.h> -#include <plat/usb-control.h> - -static struct resource s3c_usb_resource[] = { - [0] = { - .start = S3C_PA_USBHOST, - .end = S3C_PA_USBHOST + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_USBH, - .end = IRQ_USBH, - .flags = IORESOURCE_IRQ, - } -}; - -static u64 s3c_device_usb_dmamask = 0xffffffffUL; - -struct platform_device s3c_device_ohci = { - .name = "s3c2410-ohci", - .id = -1, - .num_resources = ARRAY_SIZE(s3c_usb_resource), - .resource = s3c_usb_resource, - .dev = { - .dma_mask = &s3c_device_usb_dmamask, - .coherent_dma_mask = 0xffffffffUL - } -}; - -EXPORT_SYMBOL(s3c_device_ohci); - -/** - * s3c_ohci_set_platdata - initialise OHCI device platform data - * @info: The platform data. - * - * This call copies the @info passed in and sets the device .platform_data - * field to that copy. The @info is copied so that the original can be marked - * __initdata. - */ -void __init s3c_ohci_set_platdata(struct s3c2410_hcd_info *info) -{ - s3c_set_platdata(info, sizeof(struct s3c2410_hcd_info), - &s3c_device_ohci); -} diff --git a/arch/arm/plat-samsung/dev-wdt.c b/arch/arm/plat-samsung/dev-wdt.c deleted file mode 100644 index 019b5b8cf14..00000000000 --- a/arch/arm/plat-samsung/dev-wdt.c +++ /dev/null @@ -1,40 +0,0 @@ -/* linux/arch/arm/plat-samsung/dev-wdt.c - * - * Copyright (c) 2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C series device definition for the watchdog timer - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/platform_device.h> - -#include <mach/irqs.h> -#include <mach/map.h> - -#include <plat/devs.h> - -static struct resource s3c_wdt_resource[] = { - [0] = { - .start = S3C_PA_WDT, - .end = S3C_PA_WDT + SZ_1K, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_WDT, - .end = IRQ_WDT, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device s3c_device_wdt = { - .name = "s3c2410-wdt", - .id = -1, - .num_resources = ARRAY_SIZE(s3c_wdt_resource), - .resource = s3c_wdt_resource, -}; -EXPORT_SYMBOL(s3c_device_wdt); diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c new file mode 100644 index 00000000000..4ca8b571f97 --- /dev/null +++ b/arch/arm/plat-samsung/devs.c @@ -0,0 +1,1463 @@ +/* linux/arch/arm/plat-samsung/devs.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Base SAMSUNG platform device definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/serial_core.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/dma-mapping.h> +#include <linux/fb.h> +#include <linux/gfp.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/onenand.h> +#include <linux/mtd/partitions.h> +#include <linux/mmc/host.h> +#include <linux/ioport.h> + +#include <asm/irq.h> +#include <asm/pmu.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <mach/hardware.h> +#include <mach/dma.h> +#include <mach/irqs.h> +#include <mach/map.h> + +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/adc.h> +#include <plat/ata.h> +#include <plat/ehci.h> +#include <plat/fb.h> +#include <plat/fb-s3c2410.h> +#include <plat/hwmon.h> +#include <plat/iic.h> +#include <plat/keypad.h> +#include <plat/mci.h> +#include <plat/nand.h> +#include <plat/sdhci.h> +#include <plat/ts.h> +#include <plat/udc.h> +#include <plat/usb-control.h> +#include <plat/usb-phy.h> +#include <plat/regs-iic.h> +#include <plat/regs-serial.h> +#include <plat/regs-spi.h> + +static u64 samsung_device_dma_mask = DMA_BIT_MASK(32); + +/* AC97 */ +#ifdef CONFIG_CPU_S3C2440 +static struct resource s3c_ac97_resource[] = { + [0] = DEFINE_RES_MEM(S3C2440_PA_AC97, S3C2440_SZ_AC97), + [1] = DEFINE_RES_IRQ(IRQ_S3C244X_AC97), + [2] = DEFINE_RES_DMA_NAMED(DMACH_PCM_OUT, "PCM out"), + [3] = DEFINE_RES_DMA_NAMED(DMACH_PCM_IN, "PCM in"), + [4] = DEFINE_RES_DMA_NAMED(DMACH_MIC_IN, "Mic in"), +}; + +struct platform_device s3c_device_ac97 = { + .name = "samsung-ac97", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_ac97_resource), + .resource = s3c_ac97_resource, + .dev = { + .dma_mask = &samsung_device_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + } +}; +#endif /* CONFIG_CPU_S3C2440 */ + +/* ADC */ + +#ifdef CONFIG_PLAT_S3C24XX +static struct resource s3c_adc_resource[] = { + [0] = DEFINE_RES_MEM(S3C24XX_PA_ADC, S3C24XX_SZ_ADC), + [1] = DEFINE_RES_IRQ(IRQ_TC), + [2] = DEFINE_RES_IRQ(IRQ_ADC), +}; + +struct platform_device s3c_device_adc = { + .name = "s3c24xx-adc", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_adc_resource), + .resource = s3c_adc_resource, +}; +#endif /* CONFIG_PLAT_S3C24XX */ + +#if defined(CONFIG_SAMSUNG_DEV_ADC) +static struct resource s3c_adc_resource[] = { + [0] = DEFINE_RES_MEM(SAMSUNG_PA_ADC, SZ_256), + [1] = DEFINE_RES_IRQ(IRQ_TC), + [2] = DEFINE_RES_IRQ(IRQ_ADC), +}; + +struct platform_device s3c_device_adc = { + .name = "samsung-adc", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_adc_resource), + .resource = s3c_adc_resource, +}; +#endif /* CONFIG_SAMSUNG_DEV_ADC */ + +/* Camif Controller */ + +#ifdef CONFIG_CPU_S3C2440 +static struct resource s3c_camif_resource[] = { + [0] = DEFINE_RES_MEM(S3C2440_PA_CAMIF, S3C2440_SZ_CAMIF), + [1] = DEFINE_RES_IRQ(IRQ_CAM), +}; + +struct platform_device s3c_device_camif = { + .name = "s3c2440-camif", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_camif_resource), + .resource = s3c_camif_resource, + .dev = { + .dma_mask = &samsung_device_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + } +}; +#endif /* CONFIG_CPU_S3C2440 */ + +/* ASOC DMA */ + +struct platform_device samsung_asoc_dma = { + .name = "samsung-audio", + .id = -1, + .dev = { + .dma_mask = &samsung_device_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + } +}; + +struct platform_device samsung_asoc_idma = { + .name = "samsung-idma", + .id = -1, + .dev = { + .dma_mask = &samsung_device_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + } +}; + +/* FB */ + +#ifdef CONFIG_S3C_DEV_FB +static struct resource s3c_fb_resource[] = { + [0] = DEFINE_RES_MEM(S3C_PA_FB, SZ_16K), + [1] = DEFINE_RES_IRQ(IRQ_LCD_VSYNC), + [2] = DEFINE_RES_IRQ(IRQ_LCD_FIFO), + [3] = DEFINE_RES_IRQ(IRQ_LCD_SYSTEM), +}; + +struct platform_device s3c_device_fb = { + .name = "s3c-fb", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_fb_resource), + .resource = s3c_fb_resource, + .dev = { + .dma_mask = &samsung_device_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +void __init s3c_fb_set_platdata(struct s3c_fb_platdata *pd) +{ + s3c_set_platdata(pd, sizeof(struct s3c_fb_platdata), + &s3c_device_fb); +} +#endif /* CONFIG_S3C_DEV_FB */ + +/* FIMC */ + +#ifdef CONFIG_S5P_DEV_FIMC0 +static struct resource s5p_fimc0_resource[] = { + [0] = DEFINE_RES_MEM(S5P_PA_FIMC0, SZ_4K), + [1] = DEFINE_RES_IRQ(IRQ_FIMC0), +}; + +struct platform_device s5p_device_fimc0 = { + .name = "s5p-fimc", + .id = 0, + .num_resources = ARRAY_SIZE(s5p_fimc0_resource), + .resource = s5p_fimc0_resource, + .dev = { + .dma_mask = &samsung_device_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +struct platform_device s5p_device_fimc_md = { + .name = "s5p-fimc-md", + .id = -1, +}; +#endif /* CONFIG_S5P_DEV_FIMC0 */ + +#ifdef CONFIG_S5P_DEV_FIMC1 +static struct resource s5p_fimc1_resource[] = { + [0] = DEFINE_RES_MEM(S5P_PA_FIMC1, SZ_4K), + [1] = DEFINE_RES_IRQ(IRQ_FIMC1), +}; + +struct platform_device s5p_device_fimc1 = { + .name = "s5p-fimc", + .id = 1, + .num_resources = ARRAY_SIZE(s5p_fimc1_resource), + .resource = s5p_fimc1_resource, + .dev = { + .dma_mask = &samsung_device_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; +#endif /* CONFIG_S5P_DEV_FIMC1 */ + +#ifdef CONFIG_S5P_DEV_FIMC2 +static struct resource s5p_fimc2_resource[] = { + [0] = DEFINE_RES_MEM(S5P_PA_FIMC2, SZ_4K), + [1] = DEFINE_RES_IRQ(IRQ_FIMC2), +}; + +struct platform_device s5p_device_fimc2 = { + .name = "s5p-fimc", + .id = 2, + .num_resources = ARRAY_SIZE(s5p_fimc2_resource), + .resource = s5p_fimc2_resource, + .dev = { + .dma_mask = &samsung_device_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; +#endif /* CONFIG_S5P_DEV_FIMC2 */ + +#ifdef CONFIG_S5P_DEV_FIMC3 +static struct resource s5p_fimc3_resource[] = { + [0] = DEFINE_RES_MEM(S5P_PA_FIMC3, SZ_4K), + [1] = DEFINE_RES_IRQ(IRQ_FIMC3), +}; + +struct platform_device s5p_device_fimc3 = { + .name = "s5p-fimc", + .id = 3, + .num_resources = ARRAY_SIZE(s5p_fimc3_resource), + .resource = s5p_fimc3_resource, + .dev = { + .dma_mask = &samsung_device_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; +#endif /* CONFIG_S5P_DEV_FIMC3 */ + +/* FIMD0 */ + +#ifdef CONFIG_S5P_DEV_FIMD0 +static struct resource s5p_fimd0_resource[] = { + [0] = DEFINE_RES_MEM(S5P_PA_FIMD0, SZ_32K), + [1] = DEFINE_RES_IRQ(IRQ_FIMD0_VSYNC), + [2] = DEFINE_RES_IRQ(IRQ_FIMD0_FIFO), + [3] = DEFINE_RES_IRQ(IRQ_FIMD0_SYSTEM), +}; + +struct platform_device s5p_device_fimd0 = { + .name = "s5p-fb", + .id = 0, + .num_resources = ARRAY_SIZE(s5p_fimd0_resource), + .resource = s5p_fimd0_resource, + .dev = { + .dma_mask = &samsung_device_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +void __init s5p_fimd0_set_platdata(struct s3c_fb_platdata *pd) +{ + s3c_set_platdata(pd, sizeof(struct s3c_fb_platdata), + &s5p_device_fimd0); +} +#endif /* CONFIG_S5P_DEV_FIMD0 */ + +/* HWMON */ + +#ifdef CONFIG_S3C_DEV_HWMON +struct platform_device s3c_device_hwmon = { + .name = "s3c-hwmon", + .id = -1, + .dev.parent = &s3c_device_adc.dev, +}; + +void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd) +{ + s3c_set_platdata(pd, sizeof(struct s3c_hwmon_pdata), + &s3c_device_hwmon); +} +#endif /* CONFIG_S3C_DEV_HWMON */ + +/* HSMMC */ + +#ifdef CONFIG_S3C_DEV_HSMMC +static struct resource s3c_hsmmc_resource[] = { + [0] = DEFINE_RES_MEM(S3C_PA_HSMMC0, SZ_4K), + [1] = DEFINE_RES_IRQ(IRQ_HSMMC0), +}; + +struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata = { + .max_width = 4, + .host_caps = (MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), + .clk_type = S3C_SDHCI_CLK_DIV_INTERNAL, +}; + +struct platform_device s3c_device_hsmmc0 = { + .name = "s3c-sdhci", + .id = 0, + .num_resources = ARRAY_SIZE(s3c_hsmmc_resource), + .resource = s3c_hsmmc_resource, + .dev = { + .dma_mask = &samsung_device_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s3c_hsmmc0_def_platdata, + }, +}; + +void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd) +{ + s3c_sdhci_set_platdata(pd, &s3c_hsmmc0_def_platdata); +} +#endif /* CONFIG_S3C_DEV_HSMMC */ + +#ifdef CONFIG_S3C_DEV_HSMMC1 +static struct resource s3c_hsmmc1_resource[] = { + [0] = DEFINE_RES_MEM(S3C_PA_HSMMC1, SZ_4K), + [1] = DEFINE_RES_IRQ(IRQ_HSMMC1), +}; + +struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata = { + .max_width = 4, + .host_caps = (MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), + .clk_type = S3C_SDHCI_CLK_DIV_INTERNAL, +}; + +struct platform_device s3c_device_hsmmc1 = { + .name = "s3c-sdhci", + .id = 1, + .num_resources = ARRAY_SIZE(s3c_hsmmc1_resource), + .resource = s3c_hsmmc1_resource, + .dev = { + .dma_mask = &samsung_device_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s3c_hsmmc1_def_platdata, + }, +}; + +void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd) +{ + s3c_sdhci_set_platdata(pd, &s3c_hsmmc1_def_platdata); +} +#endif /* CONFIG_S3C_DEV_HSMMC1 */ + +/* HSMMC2 */ + +#ifdef CONFIG_S3C_DEV_HSMMC2 +static struct resource s3c_hsmmc2_resource[] = { + [0] = DEFINE_RES_MEM(S3C_PA_HSMMC2, SZ_4K), + [1] = DEFINE_RES_IRQ(IRQ_HSMMC2), +}; + +struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata = { + .max_width = 4, + .host_caps = (MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), + .clk_type = S3C_SDHCI_CLK_DIV_INTERNAL, +}; + +struct platform_device s3c_device_hsmmc2 = { + .name = "s3c-sdhci", + .id = 2, + .num_resources = ARRAY_SIZE(s3c_hsmmc2_resource), + .resource = s3c_hsmmc2_resource, + .dev = { + .dma_mask = &samsung_device_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s3c_hsmmc2_def_platdata, + }, +}; + +void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd) +{ + s3c_sdhci_set_platdata(pd, &s3c_hsmmc2_def_platdata); +} +#endif /* CONFIG_S3C_DEV_HSMMC2 */ + +#ifdef CONFIG_S3C_DEV_HSMMC3 +static struct resource s3c_hsmmc3_resource[] = { + [0] = DEFINE_RES_MEM(S3C_PA_HSMMC3, SZ_4K), + [1] = DEFINE_RES_IRQ(IRQ_HSMMC3), +}; + +struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata = { + .max_width = 4, + .host_caps = (MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), + .clk_type = S3C_SDHCI_CLK_DIV_INTERNAL, +}; + +struct platform_device s3c_device_hsmmc3 = { + .name = "s3c-sdhci", + .id = 3, + .num_resources = ARRAY_SIZE(s3c_hsmmc3_resource), + .resource = s3c_hsmmc3_resource, + .dev = { + .dma_mask = &samsung_device_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s3c_hsmmc3_def_platdata, + }, +}; + +void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd) +{ + s3c_sdhci_set_platdata(pd, &s3c_hsmmc3_def_platdata); +} +#endif /* CONFIG_S3C_DEV_HSMMC3 */ + +/* I2C */ + +static struct resource s3c_i2c0_resource[] = { + [0] = DEFINE_RES_MEM(S3C_PA_IIC, SZ_4K), + [1] = DEFINE_RES_IRQ(IRQ_IIC), +}; + +struct platform_device s3c_device_i2c0 = { + .name = "s3c2410-i2c", +#ifdef CONFIG_S3C_DEV_I2C1 + .id = 0, +#else + .id = -1, +#endif + .num_resources = ARRAY_SIZE(s3c_i2c0_resource), + .resource = s3c_i2c0_resource, +}; + +struct s3c2410_platform_i2c default_i2c_data __initdata = { + .flags = 0, + .slave_addr = 0x10, + .frequency = 100*1000, + .sda_delay = 100, +}; + +void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd) +{ + struct s3c2410_platform_i2c *npd; + + if (!pd) + pd = &default_i2c_data; + + npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), + &s3c_device_i2c0); + + if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c0_cfg_gpio; +} + +#ifdef CONFIG_S3C_DEV_I2C1 +static struct resource s3c_i2c1_resource[] = { + [0] = DEFINE_RES_MEM(S3C_PA_IIC1, SZ_4K), + [1] = DEFINE_RES_IRQ(IRQ_IIC1), +}; + +struct platform_device s3c_device_i2c1 = { + .name = "s3c2410-i2c", + .id = 1, + .num_resources = ARRAY_SIZE(s3c_i2c1_resource), + .resource = s3c_i2c1_resource, +}; + +void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd) +{ + struct s3c2410_platform_i2c *npd; + + if (!pd) { + pd = &default_i2c_data; + pd->bus_num = 1; + } + + npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), + &s3c_device_i2c1); + + if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c1_cfg_gpio; +} +#endif /* CONFIG_S3C_DEV_I2C1 */ + +#ifdef CONFIG_S3C_DEV_I2C2 +static struct resource s3c_i2c2_resource[] = { + [0] = DEFINE_RES_MEM(S3C_PA_IIC2, SZ_4K), + [1] = DEFINE_RES_IRQ(IRQ_IIC2), +}; + +struct platform_device s3c_device_i2c2 = { + .name = "s3c2410-i2c", + .id = 2, + .num_resources = ARRAY_SIZE(s3c_i2c2_resource), + .resource = s3c_i2c2_resource, +}; + +void __init s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *pd) +{ + struct s3c2410_platform_i2c *npd; + + if (!pd) { + pd = &default_i2c_data; + pd->bus_num = 2; + } + + npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), + &s3c_device_i2c2); + + if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c2_cfg_gpio; +} +#endif /* CONFIG_S3C_DEV_I2C2 */ + +#ifdef CONFIG_S3C_DEV_I2C3 +static struct resource s3c_i2c3_resource[] = { + [0] = DEFINE_RES_MEM(S3C_PA_IIC3, SZ_4K), + [1] = DEFINE_RES_IRQ(IRQ_IIC3), +}; + +struct platform_device s3c_device_i2c3 = { + .name = "s3c2440-i2c", + .id = 3, + .num_resources = ARRAY_SIZE(s3c_i2c3_resource), + .resource = s3c_i2c3_resource, +}; + +void __init s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *pd) +{ + struct s3c2410_platform_i2c *npd; + + if (!pd) { + pd = &default_i2c_data; + pd->bus_num = 3; + } + + npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), + &s3c_device_i2c3); + + if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c3_cfg_gpio; +} +#endif /*CONFIG_S3C_DEV_I2C3 */ + +#ifdef CONFIG_S3C_DEV_I2C4 +static struct resource s3c_i2c4_resource[] = { + [0] = DEFINE_RES_MEM(S3C_PA_IIC4, SZ_4K), + [1] = DEFINE_RES_IRQ(IRQ_IIC4), +}; + +struct platform_device s3c_device_i2c4 = { + .name = "s3c2440-i2c", + .id = 4, + .num_resources = ARRAY_SIZE(s3c_i2c4_resource), + .resource = s3c_i2c4_resource, +}; + +void __init s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *pd) +{ + struct s3c2410_platform_i2c *npd; + + if (!pd) { + pd = &default_i2c_data; + pd->bus_num = 4; + } + + npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), + &s3c_device_i2c4); + + if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c4_cfg_gpio; +} +#endif /*CONFIG_S3C_DEV_I2C4 */ + +#ifdef CONFIG_S3C_DEV_I2C5 +static struct resource s3c_i2c5_resource[] = { + [0] = DEFINE_RES_MEM(S3C_PA_IIC5, SZ_4K), + [1] = DEFINE_RES_IRQ(IRQ_IIC5), +}; + +struct platform_device s3c_device_i2c5 = { + .name = "s3c2440-i2c", + .id = 5, + .num_resources = ARRAY_SIZE(s3c_i2c5_resource), + .resource = s3c_i2c5_resource, +}; + +void __init s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *pd) +{ + struct s3c2410_platform_i2c *npd; + + if (!pd) { + pd = &default_i2c_data; + pd->bus_num = 5; + } + + npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), + &s3c_device_i2c5); + + if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c5_cfg_gpio; +} +#endif /*CONFIG_S3C_DEV_I2C5 */ + +#ifdef CONFIG_S3C_DEV_I2C6 +static struct resource s3c_i2c6_resource[] = { + [0] = DEFINE_RES_MEM(S3C_PA_IIC6, SZ_4K), + [1] = DEFINE_RES_IRQ(IRQ_IIC6), +}; + +struct platform_device s3c_device_i2c6 = { + .name = "s3c2440-i2c", + .id = 6, + .num_resources = ARRAY_SIZE(s3c_i2c6_resource), + .resource = s3c_i2c6_resource, +}; + +void __init s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *pd) +{ + struct s3c2410_platform_i2c *npd; + + if (!pd) { + pd = &default_i2c_data; + pd->bus_num = 6; + } + + npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), + &s3c_device_i2c6); + + if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c6_cfg_gpio; +} +#endif /* CONFIG_S3C_DEV_I2C6 */ + +#ifdef CONFIG_S3C_DEV_I2C7 +static struct resource s3c_i2c7_resource[] = { + [0] = DEFINE_RES_MEM(S3C_PA_IIC7, SZ_4K), + [1] = DEFINE_RES_IRQ(IRQ_IIC7), +}; + +struct platform_device s3c_device_i2c7 = { + .name = "s3c2440-i2c", + .id = 7, + .num_resources = ARRAY_SIZE(s3c_i2c7_resource), + .resource = s3c_i2c7_resource, +}; + +void __init s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *pd) +{ + struct s3c2410_platform_i2c *npd; + + if (!pd) { + pd = &default_i2c_data; + pd->bus_num = 7; + } + + npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), + &s3c_device_i2c7); + + if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c7_cfg_gpio; +} +#endif /* CONFIG_S3C_DEV_I2C7 */ + +/* I2C HDMIPHY */ + +#ifdef CONFIG_S5P_DEV_I2C_HDMIPHY +static struct resource s5p_i2c_resource[] = { + [0] = DEFINE_RES_MEM(S5P_PA_IIC_HDMIPHY, SZ_4K), + [1] = DEFINE_RES_IRQ(IRQ_IIC_HDMIPHY), +}; + +struct platform_device s5p_device_i2c_hdmiphy = { + .name = "s3c2440-hdmiphy-i2c", + .id = -1, + .num_resources = ARRAY_SIZE(s5p_i2c_resource), + .resource = s5p_i2c_resource, +}; + +void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd) +{ + struct s3c2410_platform_i2c *npd; + + if (!pd) { + pd = &default_i2c_data; + + if (soc_is_exynos4210()) + pd->bus_num = 8; + else if (soc_is_s5pv210()) + pd->bus_num = 3; + else + pd->bus_num = 0; + } + + npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), + &s5p_device_i2c_hdmiphy); +} +#endif /* CONFIG_S5P_DEV_I2C_HDMIPHY */ + +/* I2S */ + +#ifdef CONFIG_PLAT_S3C24XX +static struct resource s3c_iis_resource[] = { + [0] = DEFINE_RES_MEM(S3C24XX_PA_IIS, S3C24XX_SZ_IIS), +}; + +struct platform_device s3c_device_iis = { + .name = "s3c24xx-iis", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_iis_resource), + .resource = s3c_iis_resource, + .dev = { + .dma_mask = &samsung_device_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + } +}; +#endif /* CONFIG_PLAT_S3C24XX */ + +#ifdef CONFIG_CPU_S3C2440 +struct platform_device s3c2412_device_iis = { + .name = "s3c2412-iis", + .id = -1, + .dev = { + .dma_mask = &samsung_device_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + } +}; +#endif /* CONFIG_CPU_S3C2440 */ + +/* IDE CFCON */ + +#ifdef CONFIG_SAMSUNG_DEV_IDE +static struct resource s3c_cfcon_resource[] = { + [0] = DEFINE_RES_MEM(SAMSUNG_PA_CFCON, SZ_16K), + [1] = DEFINE_RES_IRQ(IRQ_CFCON), +}; + +struct platform_device s3c_device_cfcon = { + .id = 0, + .num_resources = ARRAY_SIZE(s3c_cfcon_resource), + .resource = s3c_cfcon_resource, +}; + +void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata) +{ + s3c_set_platdata(pdata, sizeof(struct s3c_ide_platdata), + &s3c_device_cfcon); +} +#endif /* CONFIG_SAMSUNG_DEV_IDE */ + +/* KEYPAD */ + +#ifdef CONFIG_SAMSUNG_DEV_KEYPAD +static struct resource samsung_keypad_resources[] = { + [0] = DEFINE_RES_MEM(SAMSUNG_PA_KEYPAD, SZ_32), + [1] = DEFINE_RES_IRQ(IRQ_KEYPAD), +}; + +struct platform_device samsung_device_keypad = { + .name = "samsung-keypad", + .id = -1, + .num_resources = ARRAY_SIZE(samsung_keypad_resources), + .resource = samsung_keypad_resources, +}; + +void __init samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd) +{ + struct samsung_keypad_platdata *npd; + + npd = s3c_set_platdata(pd, sizeof(struct samsung_keypad_platdata), + &samsung_device_keypad); + + if (!npd->cfg_gpio) + npd->cfg_gpio = samsung_keypad_cfg_gpio; +} +#endif /* CONFIG_SAMSUNG_DEV_KEYPAD */ + +/* LCD Controller */ + +#ifdef CONFIG_PLAT_S3C24XX +static struct resource s3c_lcd_resource[] = { + [0] = DEFINE_RES_MEM(S3C24XX_PA_LCD, S3C24XX_SZ_LCD), + [1] = DEFINE_RES_IRQ(IRQ_LCD), +}; + +struct platform_device s3c_device_lcd = { + .name = "s3c2410-lcd", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_lcd_resource), + .resource = s3c_lcd_resource, + .dev = { + .dma_mask = &samsung_device_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + } +}; + +void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd) +{ + struct s3c2410fb_mach_info *npd; + + npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_lcd); + if (npd) { + npd->displays = kmemdup(pd->displays, + sizeof(struct s3c2410fb_display) * npd->num_displays, + GFP_KERNEL); + if (!npd->displays) + printk(KERN_ERR "no memory for LCD display data\n"); + } else { + printk(KERN_ERR "no memory for LCD platform data\n"); + } +} +#endif /* CONFIG_PLAT_S3C24XX */ + +/* MFC */ + +#ifdef CONFIG_S5P_DEV_MFC +static struct resource s5p_mfc_resource[] = { + [0] = DEFINE_RES_MEM(S5P_PA_MFC, SZ_64K), + [1] = DEFINE_RES_IRQ(IRQ_MFC), +}; + +struct platform_device s5p_device_mfc = { + .name = "s5p-mfc", + .id = -1, + .num_resources = ARRAY_SIZE(s5p_mfc_resource), + .resource = s5p_mfc_resource, +}; + +/* + * MFC hardware has 2 memory interfaces which are modelled as two separate + * platform devices to let dma-mapping distinguish between them. + * + * MFC parent device (s5p_device_mfc) must be registered before memory + * interface specific devices (s5p_device_mfc_l and s5p_device_mfc_r). + */ + +struct platform_device s5p_device_mfc_l = { + .name = "s5p-mfc-l", + .id = -1, + .dev = { + .parent = &s5p_device_mfc.dev, + .dma_mask = &samsung_device_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +struct platform_device s5p_device_mfc_r = { + .name = "s5p-mfc-r", + .id = -1, + .dev = { + .parent = &s5p_device_mfc.dev, + .dma_mask = &samsung_device_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; +#endif /* CONFIG_S5P_DEV_MFC */ + +/* MIPI CSIS */ + +#ifdef CONFIG_S5P_DEV_CSIS0 +static struct resource s5p_mipi_csis0_resource[] = { + [0] = DEFINE_RES_MEM(S5P_PA_MIPI_CSIS0, SZ_4K), + [1] = DEFINE_RES_IRQ(IRQ_MIPI_CSIS0), +}; + +struct platform_device s5p_device_mipi_csis0 = { + .name = "s5p-mipi-csis", + .id = 0, + .num_resources = ARRAY_SIZE(s5p_mipi_csis0_resource), + .resource = s5p_mipi_csis0_resource, +}; +#endif /* CONFIG_S5P_DEV_CSIS0 */ + +#ifdef CONFIG_S5P_DEV_CSIS1 +static struct resource s5p_mipi_csis1_resource[] = { + [0] = DEFINE_RES_MEM(S5P_PA_MIPI_CSIS1, SZ_4K), + [1] = DEFINE_RES_IRQ(IRQ_MIPI_CSIS1), +}; + +struct platform_device s5p_device_mipi_csis1 = { + .name = "s5p-mipi-csis", + .id = 1, + .num_resources = ARRAY_SIZE(s5p_mipi_csis1_resource), + .resource = s5p_mipi_csis1_resource, +}; +#endif + +/* NAND */ + +#ifdef CONFIG_S3C_DEV_NAND +static struct resource s3c_nand_resource[] = { + [0] = DEFINE_RES_MEM(S3C_PA_NAND, SZ_1M), +}; + +struct platform_device s3c_device_nand = { + .name = "s3c2410-nand", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_nand_resource), + .resource = s3c_nand_resource, +}; + +/* + * s3c_nand_copy_set() - copy nand set data + * @set: The new structure, directly copied from the old. + * + * Copy all the fields from the NAND set field from what is probably __initdata + * to new kernel memory. The code returns 0 if the copy happened correctly or + * an error code for the calling function to display. + * + * Note, we currently do not try and look to see if we've already copied the + * data in a previous set. + */ +static int __init s3c_nand_copy_set(struct s3c2410_nand_set *set) +{ + void *ptr; + int size; + + size = sizeof(struct mtd_partition) * set->nr_partitions; + if (size) { + ptr = kmemdup(set->partitions, size, GFP_KERNEL); + set->partitions = ptr; + + if (!ptr) + return -ENOMEM; + } + + if (set->nr_map && set->nr_chips) { + size = sizeof(int) * set->nr_chips; + ptr = kmemdup(set->nr_map, size, GFP_KERNEL); + set->nr_map = ptr; + + if (!ptr) + return -ENOMEM; + } + + if (set->ecc_layout) { + ptr = kmemdup(set->ecc_layout, + sizeof(struct nand_ecclayout), GFP_KERNEL); + set->ecc_layout = ptr; + + if (!ptr) + return -ENOMEM; + } + + return 0; +} + +void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand) +{ + struct s3c2410_platform_nand *npd; + int size; + int ret; + + /* note, if we get a failure in allocation, we simply drop out of the + * function. If there is so little memory available at initialisation + * time then there is little chance the system is going to run. + */ + + npd = s3c_set_platdata(nand, sizeof(struct s3c2410_platform_nand), + &s3c_device_nand); + if (!npd) + return; + + /* now see if we need to copy any of the nand set data */ + + size = sizeof(struct s3c2410_nand_set) * npd->nr_sets; + if (size) { + struct s3c2410_nand_set *from = npd->sets; + struct s3c2410_nand_set *to; + int i; + + to = kmemdup(from, size, GFP_KERNEL); + npd->sets = to; /* set, even if we failed */ + + if (!to) { + printk(KERN_ERR "%s: no memory for sets\n", __func__); + return; + } + + for (i = 0; i < npd->nr_sets; i++) { + ret = s3c_nand_copy_set(to); + if (ret) { + printk(KERN_ERR "%s: failed to copy set %d\n", + __func__, i); + return; + } + to++; + } + } +} +#endif /* CONFIG_S3C_DEV_NAND */ + +/* ONENAND */ + +#ifdef CONFIG_S3C_DEV_ONENAND +static struct resource s3c_onenand_resources[] = { + [0] = DEFINE_RES_MEM(S3C_PA_ONENAND, SZ_1K), + [1] = DEFINE_RES_MEM(S3C_PA_ONENAND_BUF, S3C_SZ_ONENAND_BUF), + [2] = DEFINE_RES_IRQ(IRQ_ONENAND), +}; + +struct platform_device s3c_device_onenand = { + .name = "samsung-onenand", + .id = 0, + .num_resources = ARRAY_SIZE(s3c_onenand_resources), + .resource = s3c_onenand_resources, +}; +#endif /* CONFIG_S3C_DEV_ONENAND */ + +#ifdef CONFIG_S3C64XX_DEV_ONENAND1 +static struct resource s3c64xx_onenand1_resources[] = { + [0] = DEFINE_RES_MEM(S3C64XX_PA_ONENAND1, SZ_1K), + [1] = DEFINE_RES_MEM(S3C64XX_PA_ONENAND1_BUF, S3C64XX_SZ_ONENAND1_BUF), + [2] = DEFINE_RES_IRQ(IRQ_ONENAND1), +}; + +struct platform_device s3c64xx_device_onenand1 = { + .name = "samsung-onenand", + .id = 1, + .num_resources = ARRAY_SIZE(s3c64xx_onenand1_resources), + .resource = s3c64xx_onenand1_resources, +}; + +void s3c64xx_onenand1_set_platdata(struct onenand_platform_data *pdata) +{ + s3c_set_platdata(pdata, sizeof(struct onenand_platform_data), + &s3c64xx_device_onenand1); +} +#endif /* CONFIG_S3C64XX_DEV_ONENAND1 */ + +#ifdef CONFIG_S5P_DEV_ONENAND +static struct resource s5p_onenand_resources[] = { + [0] = DEFINE_RES_MEM(S5P_PA_ONENAND, SZ_128K), + [1] = DEFINE_RES_MEM(S5P_PA_ONENAND_DMA, SZ_8K), + [2] = DEFINE_RES_IRQ(IRQ_ONENAND_AUDI), +}; + +struct platform_device s5p_device_onenand = { + .name = "s5pc110-onenand", + .id = -1, + .num_resources = ARRAY_SIZE(s5p_onenand_resources), + .resource = s5p_onenand_resources, +}; +#endif /* CONFIG_S5P_DEV_ONENAND */ + +/* PMU */ + +#ifdef CONFIG_PLAT_S5P +static struct resource s5p_pmu_resource[] = { + DEFINE_RES_IRQ(IRQ_PMU) +}; + +struct platform_device s5p_device_pmu = { + .name = "arm-pmu", + .id = ARM_PMU_DEVICE_CPU, + .num_resources = ARRAY_SIZE(s5p_pmu_resource), + .resource = s5p_pmu_resource, +}; + +static int __init s5p_pmu_init(void) +{ + platform_device_register(&s5p_device_pmu); + return 0; +} +arch_initcall(s5p_pmu_init); +#endif /* CONFIG_PLAT_S5P */ + +/* PWM Timer */ + +#ifdef CONFIG_SAMSUNG_DEV_PWM + +#define TIMER_RESOURCE_SIZE (1) + +#define TIMER_RESOURCE(_tmr, _irq) \ + (struct resource [TIMER_RESOURCE_SIZE]) { \ + [0] = { \ + .start = _irq, \ + .end = _irq, \ + .flags = IORESOURCE_IRQ \ + } \ + } + +#define DEFINE_S3C_TIMER(_tmr_no, _irq) \ + .name = "s3c24xx-pwm", \ + .id = _tmr_no, \ + .num_resources = TIMER_RESOURCE_SIZE, \ + .resource = TIMER_RESOURCE(_tmr_no, _irq), \ + +/* + * since we already have an static mapping for the timer, + * we do not bother setting any IO resource for the base. + */ + +struct platform_device s3c_device_timer[] = { + [0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) }, + [1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) }, + [2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) }, + [3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) }, + [4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) }, +}; +#endif /* CONFIG_SAMSUNG_DEV_PWM */ + +/* RTC */ + +#ifdef CONFIG_PLAT_S3C24XX +static struct resource s3c_rtc_resource[] = { + [0] = DEFINE_RES_MEM(S3C24XX_PA_RTC, SZ_256), + [1] = DEFINE_RES_IRQ(IRQ_RTC), + [2] = DEFINE_RES_IRQ(IRQ_TICK), +}; + +struct platform_device s3c_device_rtc = { + .name = "s3c2410-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_rtc_resource), + .resource = s3c_rtc_resource, +}; +#endif /* CONFIG_PLAT_S3C24XX */ + +#ifdef CONFIG_S3C_DEV_RTC +static struct resource s3c_rtc_resource[] = { + [0] = DEFINE_RES_MEM(S3C_PA_RTC, SZ_256), + [1] = DEFINE_RES_IRQ(IRQ_RTC_ALARM), + [2] = DEFINE_RES_IRQ(IRQ_RTC_TIC), +}; + +struct platform_device s3c_device_rtc = { + .name = "s3c64xx-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_rtc_resource), + .resource = s3c_rtc_resource, +}; +#endif /* CONFIG_S3C_DEV_RTC */ + +/* SDI */ + +#ifdef CONFIG_PLAT_S3C24XX +static struct resource s3c_sdi_resource[] = { + [0] = DEFINE_RES_MEM(S3C24XX_PA_SDI, S3C24XX_SZ_SDI), + [1] = DEFINE_RES_IRQ(IRQ_SDI), +}; + +struct platform_device s3c_device_sdi = { + .name = "s3c2410-sdi", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_sdi_resource), + .resource = s3c_sdi_resource, +}; + +void __init s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata) +{ + s3c_set_platdata(pdata, sizeof(struct s3c24xx_mci_pdata), + &s3c_device_sdi); +} +#endif /* CONFIG_PLAT_S3C24XX */ + +/* SPI */ + +#ifdef CONFIG_PLAT_S3C24XX +static struct resource s3c_spi0_resource[] = { + [0] = DEFINE_RES_MEM(S3C24XX_PA_SPI, SZ_32), + [1] = DEFINE_RES_IRQ(IRQ_SPI0), +}; + +struct platform_device s3c_device_spi0 = { + .name = "s3c2410-spi", + .id = 0, + .num_resources = ARRAY_SIZE(s3c_spi0_resource), + .resource = s3c_spi0_resource, + .dev = { + .dma_mask = &samsung_device_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + } +}; + +static struct resource s3c_spi1_resource[] = { + [0] = DEFINE_RES_MEM(S3C24XX_PA_SPI1, SZ_32), + [1] = DEFINE_RES_IRQ(IRQ_SPI1), +}; + +struct platform_device s3c_device_spi1 = { + .name = "s3c2410-spi", + .id = 1, + .num_resources = ARRAY_SIZE(s3c_spi1_resource), + .resource = s3c_spi1_resource, + .dev = { + .dma_mask = &samsung_device_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + } +}; +#endif /* CONFIG_PLAT_S3C24XX */ + +/* Touchscreen */ + +#ifdef CONFIG_PLAT_S3C24XX +static struct resource s3c_ts_resource[] = { + [0] = DEFINE_RES_MEM(S3C24XX_PA_ADC, S3C24XX_SZ_ADC), + [1] = DEFINE_RES_IRQ(IRQ_TC), +}; + +struct platform_device s3c_device_ts = { + .name = "s3c2410-ts", + .id = -1, + .dev.parent = &s3c_device_adc.dev, + .num_resources = ARRAY_SIZE(s3c_ts_resource), + .resource = s3c_ts_resource, +}; + +void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_info) +{ + s3c_set_platdata(hard_s3c2410ts_info, + sizeof(struct s3c2410_ts_mach_info), &s3c_device_ts); +} +#endif /* CONFIG_PLAT_S3C24XX */ + +#ifdef CONFIG_SAMSUNG_DEV_TS +static struct resource s3c_ts_resource[] = { + [0] = DEFINE_RES_MEM(SAMSUNG_PA_ADC, SZ_256), + [1] = DEFINE_RES_IRQ(IRQ_TC), +}; + +static struct s3c2410_ts_mach_info default_ts_data __initdata = { + .delay = 10000, + .presc = 49, + .oversampling_shift = 2, +}; + +struct platform_device s3c_device_ts = { + .name = "s3c64xx-ts", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_ts_resource), + .resource = s3c_ts_resource, +}; + +void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd) +{ + if (!pd) + pd = &default_ts_data; + + s3c_set_platdata(pd, sizeof(struct s3c2410_ts_mach_info), + &s3c_device_ts); +} +#endif /* CONFIG_SAMSUNG_DEV_TS */ + +/* TV */ + +#ifdef CONFIG_S5P_DEV_TV + +static struct resource s5p_hdmi_resources[] = { + [0] = DEFINE_RES_MEM(S5P_PA_HDMI, SZ_1M), + [1] = DEFINE_RES_IRQ(IRQ_HDMI), +}; + +struct platform_device s5p_device_hdmi = { + .name = "s5p-hdmi", + .id = -1, + .num_resources = ARRAY_SIZE(s5p_hdmi_resources), + .resource = s5p_hdmi_resources, +}; + +static struct resource s5p_sdo_resources[] = { + [0] = DEFINE_RES_MEM(S5P_PA_SDO, SZ_64K), + [1] = DEFINE_RES_IRQ(IRQ_SDO), +}; + +struct platform_device s5p_device_sdo = { + .name = "s5p-sdo", + .id = -1, + .num_resources = ARRAY_SIZE(s5p_sdo_resources), + .resource = s5p_sdo_resources, +}; + +static struct resource s5p_mixer_resources[] = { + [0] = DEFINE_RES_MEM_NAMED(S5P_PA_MIXER, SZ_64K, "mxr"), + [1] = DEFINE_RES_MEM_NAMED(S5P_PA_VP, SZ_64K, "vp"), + [2] = DEFINE_RES_IRQ_NAMED(IRQ_MIXER, "irq"), +}; + +struct platform_device s5p_device_mixer = { + .name = "s5p-mixer", + .id = -1, + .num_resources = ARRAY_SIZE(s5p_mixer_resources), + .resource = s5p_mixer_resources, + .dev = { + .dma_mask = &samsung_device_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + } +}; +#endif /* CONFIG_S5P_DEV_TV */ + +/* USB */ + +#ifdef CONFIG_S3C_DEV_USB_HOST +static struct resource s3c_usb_resource[] = { + [0] = DEFINE_RES_MEM(S3C_PA_USBHOST, SZ_256), + [1] = DEFINE_RES_IRQ(IRQ_USBH), +}; + +struct platform_device s3c_device_ohci = { + .name = "s3c2410-ohci", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_usb_resource), + .resource = s3c_usb_resource, + .dev = { + .dma_mask = &samsung_device_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + } +}; + +/* + * s3c_ohci_set_platdata - initialise OHCI device platform data + * @info: The platform data. + * + * This call copies the @info passed in and sets the device .platform_data + * field to that copy. The @info is copied so that the original can be marked + * __initdata. + */ + +void __init s3c_ohci_set_platdata(struct s3c2410_hcd_info *info) +{ + s3c_set_platdata(info, sizeof(struct s3c2410_hcd_info), + &s3c_device_ohci); +} +#endif /* CONFIG_S3C_DEV_USB_HOST */ + +/* USB Device (Gadget) */ + +#ifdef CONFIG_PLAT_S3C24XX +static struct resource s3c_usbgadget_resource[] = { + [0] = DEFINE_RES_MEM(S3C24XX_PA_USBDEV, S3C24XX_SZ_USBDEV), + [1] = DEFINE_RES_IRQ(IRQ_USBD), +}; + +struct platform_device s3c_device_usbgadget = { + .name = "s3c2410-usbgadget", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_usbgadget_resource), + .resource = s3c_usbgadget_resource, +}; + +void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *pd) +{ + s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usbgadget); +} +#endif /* CONFIG_PLAT_S3C24XX */ + +/* USB EHCI Host Controller */ + +#ifdef CONFIG_S5P_DEV_USB_EHCI +static struct resource s5p_ehci_resource[] = { + [0] = DEFINE_RES_MEM(S5P_PA_EHCI, SZ_256), + [1] = DEFINE_RES_IRQ(IRQ_USB_HOST), +}; + +struct platform_device s5p_device_ehci = { + .name = "s5p-ehci", + .id = -1, + .num_resources = ARRAY_SIZE(s5p_ehci_resource), + .resource = s5p_ehci_resource, + .dev = { + .dma_mask = &samsung_device_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + } +}; + +void __init s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd) +{ + struct s5p_ehci_platdata *npd; + + npd = s3c_set_platdata(pd, sizeof(struct s5p_ehci_platdata), + &s5p_device_ehci); + + if (!npd->phy_init) + npd->phy_init = s5p_usb_phy_init; + if (!npd->phy_exit) + npd->phy_exit = s5p_usb_phy_exit; +} +#endif /* CONFIG_S5P_DEV_USB_EHCI */ + +/* USB HSOTG */ + +#ifdef CONFIG_S3C_DEV_USB_HSOTG +static struct resource s3c_usb_hsotg_resources[] = { + [0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_16K), + [1] = DEFINE_RES_IRQ(IRQ_OTG), +}; + +struct platform_device s3c_device_usb_hsotg = { + .name = "s3c-hsotg", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_usb_hsotg_resources), + .resource = s3c_usb_hsotg_resources, + .dev = { + .dma_mask = &samsung_device_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; +#endif /* CONFIG_S3C_DEV_USB_HSOTG */ + +/* USB High Spped 2.0 Device (Gadget) */ + +#ifdef CONFIG_PLAT_S3C24XX +static struct resource s3c_hsudc_resource[] = { + [0] = DEFINE_RES_MEM(S3C2416_PA_HSUDC, S3C2416_SZ_HSUDC), + [1] = DEFINE_RES_IRQ(IRQ_USBD), +}; + +struct platform_device s3c_device_usb_hsudc = { + .name = "s3c-hsudc", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_hsudc_resource), + .resource = s3c_hsudc_resource, + .dev = { + .dma_mask = &samsung_device_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd) +{ + s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usb_hsudc); +} +#endif /* CONFIG_PLAT_S3C24XX */ + +/* WDT */ + +#ifdef CONFIG_S3C_DEV_WDT +static struct resource s3c_wdt_resource[] = { + [0] = DEFINE_RES_MEM(S3C_PA_WDT, SZ_1K), + [1] = DEFINE_RES_IRQ(IRQ_WDT), +}; + +struct platform_device s3c_device_wdt = { + .name = "s3c2410-wdt", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_wdt_resource), + .resource = s3c_wdt_resource, +}; +#endif /* CONFIG_S3C_DEV_WDT */ diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c new file mode 100644 index 00000000000..6e3d9abc9e2 --- /dev/null +++ b/arch/arm/plat-samsung/dma-ops.c @@ -0,0 +1,131 @@ +/* linux/arch/arm/plat-samsung/dma-ops.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung DMA Operations + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/amba/pl330.h> +#include <linux/scatterlist.h> + +#include <mach/dma.h> + +static inline bool pl330_filter(struct dma_chan *chan, void *param) +{ + struct dma_pl330_peri *peri = chan->private; + return peri->peri_id == (unsigned)param; +} + +static unsigned samsung_dmadev_request(enum dma_ch dma_ch, + struct samsung_dma_info *info) +{ + struct dma_chan *chan; + dma_cap_mask_t mask; + struct dma_slave_config slave_config; + + dma_cap_zero(mask); + dma_cap_set(info->cap, mask); + + chan = dma_request_channel(mask, pl330_filter, (void *)dma_ch); + + if (info->direction == DMA_FROM_DEVICE) { + memset(&slave_config, 0, sizeof(struct dma_slave_config)); + slave_config.direction = info->direction; + slave_config.src_addr = info->fifo; + slave_config.src_addr_width = info->width; + slave_config.src_maxburst = 1; + dmaengine_slave_config(chan, &slave_config); + } else if (info->direction == DMA_TO_DEVICE) { + memset(&slave_config, 0, sizeof(struct dma_slave_config)); + slave_config.direction = info->direction; + slave_config.dst_addr = info->fifo; + slave_config.dst_addr_width = info->width; + slave_config.dst_maxburst = 1; + dmaengine_slave_config(chan, &slave_config); + } + + return (unsigned)chan; +} + +static int samsung_dmadev_release(unsigned ch, + struct s3c2410_dma_client *client) +{ + dma_release_channel((struct dma_chan *)ch); + + return 0; +} + +static int samsung_dmadev_prepare(unsigned ch, + struct samsung_dma_prep_info *info) +{ + struct scatterlist sg; + struct dma_chan *chan = (struct dma_chan *)ch; + struct dma_async_tx_descriptor *desc; + + switch (info->cap) { + case DMA_SLAVE: + sg_init_table(&sg, 1); + sg_dma_len(&sg) = info->len; + sg_set_page(&sg, pfn_to_page(PFN_DOWN(info->buf)), + info->len, offset_in_page(info->buf)); + sg_dma_address(&sg) = info->buf; + + desc = chan->device->device_prep_slave_sg(chan, + &sg, 1, info->direction, DMA_PREP_INTERRUPT); + break; + case DMA_CYCLIC: + desc = chan->device->device_prep_dma_cyclic(chan, + info->buf, info->len, info->period, info->direction); + break; + default: + dev_err(&chan->dev->device, "unsupported format\n"); + return -EFAULT; + } + + if (!desc) { + dev_err(&chan->dev->device, "cannot prepare cyclic dma\n"); + return -EFAULT; + } + + desc->callback = info->fp; + desc->callback_param = info->fp_param; + + dmaengine_submit((struct dma_async_tx_descriptor *)desc); + + return 0; +} + +static inline int samsung_dmadev_trigger(unsigned ch) +{ + dma_async_issue_pending((struct dma_chan *)ch); + + return 0; +} + +static inline int samsung_dmadev_flush(unsigned ch) +{ + return dmaengine_terminate_all((struct dma_chan *)ch); +} + +struct samsung_dma_ops dmadev_ops = { + .request = samsung_dmadev_request, + .release = samsung_dmadev_release, + .prepare = samsung_dmadev_prepare, + .trigger = samsung_dmadev_trigger, + .started = NULL, + .flush = samsung_dmadev_flush, + .stop = samsung_dmadev_flush, +}; + +void *samsung_dmadev_get_ops(void) +{ + return &dmadev_ops; +} +EXPORT_SYMBOL(samsung_dmadev_get_ops); diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c deleted file mode 100644 index 1c0b0401594..00000000000 --- a/arch/arm/plat-samsung/gpio-config.c +++ /dev/null @@ -1,431 +0,0 @@ -/* linux/arch/arm/plat-s3c/gpio-config.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008-2010 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C series GPIO configuration core - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/gpio.h> -#include <linux/io.h> - -#include <plat/gpio-core.h> -#include <plat/gpio-cfg.h> -#include <plat/gpio-cfg-helpers.h> - -int s3c_gpio_cfgpin(unsigned int pin, unsigned int config) -{ - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); - unsigned long flags; - int offset; - int ret; - - if (!chip) - return -EINVAL; - - offset = pin - chip->chip.base; - - s3c_gpio_lock(chip, flags); - ret = s3c_gpio_do_setcfg(chip, offset, config); - s3c_gpio_unlock(chip, flags); - - return ret; -} -EXPORT_SYMBOL(s3c_gpio_cfgpin); - -int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr, - unsigned int cfg) -{ - int ret; - - for (; nr > 0; nr--, start++) { - ret = s3c_gpio_cfgpin(start, cfg); - if (ret != 0) - return ret; - } - - return 0; -} -EXPORT_SYMBOL_GPL(s3c_gpio_cfgpin_range); - -int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr, - unsigned int cfg, s3c_gpio_pull_t pull) -{ - int ret; - - for (; nr > 0; nr--, start++) { - s3c_gpio_setpull(start, pull); - ret = s3c_gpio_cfgpin(start, cfg); - if (ret != 0) - return ret; - } - - return 0; -} -EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range); - -unsigned s3c_gpio_getcfg(unsigned int pin) -{ - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); - unsigned long flags; - unsigned ret = 0; - int offset; - - if (chip) { - offset = pin - chip->chip.base; - - s3c_gpio_lock(chip, flags); - ret = s3c_gpio_do_getcfg(chip, offset); - s3c_gpio_unlock(chip, flags); - } - - return ret; -} -EXPORT_SYMBOL(s3c_gpio_getcfg); - - -int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull) -{ - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); - unsigned long flags; - int offset, ret; - - if (!chip) - return -EINVAL; - - offset = pin - chip->chip.base; - - s3c_gpio_lock(chip, flags); - ret = s3c_gpio_do_setpull(chip, offset, pull); - s3c_gpio_unlock(chip, flags); - - return ret; -} -EXPORT_SYMBOL(s3c_gpio_setpull); - -s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin) -{ - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); - unsigned long flags; - int offset; - u32 pup = 0; - - if (chip) { - offset = pin - chip->chip.base; - - s3c_gpio_lock(chip, flags); - pup = s3c_gpio_do_getpull(chip, offset); - s3c_gpio_unlock(chip, flags); - } - - return (__force s3c_gpio_pull_t)pup; -} -EXPORT_SYMBOL(s3c_gpio_getpull); - -#ifdef CONFIG_S3C_GPIO_CFG_S3C24XX -int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip, - unsigned int off, unsigned int cfg) -{ - void __iomem *reg = chip->base; - unsigned int shift = off; - u32 con; - - if (s3c_gpio_is_cfg_special(cfg)) { - cfg &= 0xf; - - /* Map output to 0, and SFN2 to 1 */ - cfg -= 1; - if (cfg > 1) - return -EINVAL; - - cfg <<= shift; - } - - con = __raw_readl(reg); - con &= ~(0x1 << shift); - con |= cfg; - __raw_writel(con, reg); - - return 0; -} - -unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip, - unsigned int off) -{ - u32 con; - - con = __raw_readl(chip->base); - con >>= off; - con &= 1; - con++; - - return S3C_GPIO_SFN(con); -} - -int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, - unsigned int off, unsigned int cfg) -{ - void __iomem *reg = chip->base; - unsigned int shift = off * 2; - u32 con; - - if (s3c_gpio_is_cfg_special(cfg)) { - cfg &= 0xf; - if (cfg > 3) - return -EINVAL; - - cfg <<= shift; - } - - con = __raw_readl(reg); - con &= ~(0x3 << shift); - con |= cfg; - __raw_writel(con, reg); - - return 0; -} - -unsigned int s3c_gpio_getcfg_s3c24xx(struct s3c_gpio_chip *chip, - unsigned int off) -{ - u32 con; - - con = __raw_readl(chip->base); - con >>= off * 2; - con &= 3; - - /* this conversion works for IN and OUT as well as special mode */ - return S3C_GPIO_SPECIAL(con); -} -#endif - -#ifdef CONFIG_S3C_GPIO_CFG_S3C64XX -int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, - unsigned int off, unsigned int cfg) -{ - void __iomem *reg = chip->base; - unsigned int shift = (off & 7) * 4; - u32 con; - - if (off < 8 && chip->chip.ngpio > 8) - reg -= 4; - - if (s3c_gpio_is_cfg_special(cfg)) { - cfg &= 0xf; - cfg <<= shift; - } - - con = __raw_readl(reg); - con &= ~(0xf << shift); - con |= cfg; - __raw_writel(con, reg); - - return 0; -} - -unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, - unsigned int off) -{ - void __iomem *reg = chip->base; - unsigned int shift = (off & 7) * 4; - u32 con; - - if (off < 8 && chip->chip.ngpio > 8) - reg -= 4; - - con = __raw_readl(reg); - con >>= shift; - con &= 0xf; - - /* this conversion works for IN and OUT as well as special mode */ - return S3C_GPIO_SPECIAL(con); -} - -#endif /* CONFIG_S3C_GPIO_CFG_S3C64XX */ - -#ifdef CONFIG_S3C_GPIO_PULL_UPDOWN -int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull) -{ - void __iomem *reg = chip->base + 0x08; - int shift = off * 2; - u32 pup; - - pup = __raw_readl(reg); - pup &= ~(3 << shift); - pup |= pull << shift; - __raw_writel(pup, reg); - - return 0; -} - -s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip, - unsigned int off) -{ - void __iomem *reg = chip->base + 0x08; - int shift = off * 2; - u32 pup = __raw_readl(reg); - - pup >>= shift; - pup &= 0x3; - return (__force s3c_gpio_pull_t)pup; -} - -#ifdef CONFIG_S3C_GPIO_PULL_S3C2443 -int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull) -{ - switch (pull) { - case S3C_GPIO_PULL_NONE: - pull = 0x01; - break; - case S3C_GPIO_PULL_UP: - pull = 0x00; - break; - case S3C_GPIO_PULL_DOWN: - pull = 0x02; - break; - } - return s3c_gpio_setpull_updown(chip, off, pull); -} - -s3c_gpio_pull_t s3c_gpio_getpull_s3c2443(struct s3c_gpio_chip *chip, - unsigned int off) -{ - s3c_gpio_pull_t pull; - - pull = s3c_gpio_getpull_updown(chip, off); - - switch (pull) { - case 0x00: - pull = S3C_GPIO_PULL_UP; - break; - case 0x01: - case 0x03: - pull = S3C_GPIO_PULL_NONE; - break; - case 0x02: - pull = S3C_GPIO_PULL_DOWN; - break; - } - - return pull; -} -#endif -#endif - -#if defined(CONFIG_S3C_GPIO_PULL_UP) || defined(CONFIG_S3C_GPIO_PULL_DOWN) -static int s3c_gpio_setpull_1(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull, - s3c_gpio_pull_t updown) -{ - void __iomem *reg = chip->base + 0x08; - u32 pup = __raw_readl(reg); - - if (pull == updown) - pup &= ~(1 << off); - else if (pull == S3C_GPIO_PULL_NONE) - pup |= (1 << off); - else - return -EINVAL; - - __raw_writel(pup, reg); - return 0; -} - -static s3c_gpio_pull_t s3c_gpio_getpull_1(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t updown) -{ - void __iomem *reg = chip->base + 0x08; - u32 pup = __raw_readl(reg); - - pup &= (1 << off); - return pup ? S3C_GPIO_PULL_NONE : updown; -} -#endif /* CONFIG_S3C_GPIO_PULL_UP || CONFIG_S3C_GPIO_PULL_DOWN */ - -#ifdef CONFIG_S3C_GPIO_PULL_UP -s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip, - unsigned int off) -{ - return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP); -} - -int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull) -{ - return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP); -} -#endif /* CONFIG_S3C_GPIO_PULL_UP */ - -#ifdef CONFIG_S3C_GPIO_PULL_DOWN -s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip, - unsigned int off) -{ - return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN); -} - -int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull) -{ - return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN); -} -#endif /* CONFIG_S3C_GPIO_PULL_DOWN */ - -#ifdef CONFIG_S5P_GPIO_DRVSTR -s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin) -{ - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); - unsigned int off; - void __iomem *reg; - int shift; - u32 drvstr; - - if (!chip) - return -EINVAL; - - off = pin - chip->chip.base; - shift = off * 2; - reg = chip->base + 0x0C; - - drvstr = __raw_readl(reg); - drvstr = drvstr >> shift; - drvstr &= 0x3; - - return (__force s5p_gpio_drvstr_t)drvstr; -} -EXPORT_SYMBOL(s5p_gpio_get_drvstr); - -int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr) -{ - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); - unsigned int off; - void __iomem *reg; - int shift; - u32 tmp; - - if (!chip) - return -EINVAL; - - off = pin - chip->chip.base; - shift = off * 2; - reg = chip->base + 0x0C; - - tmp = __raw_readl(reg); - tmp &= ~(0x3 << shift); - tmp |= drvstr << shift; - - __raw_writel(tmp, reg); - - return 0; -} -EXPORT_SYMBOL(s5p_gpio_set_drvstr); -#endif /* CONFIG_S5P_GPIO_DRVSTR */ diff --git a/arch/arm/plat-samsung/gpio.c b/arch/arm/plat-samsung/gpio.c deleted file mode 100644 index 7743c4b8b2f..00000000000 --- a/arch/arm/plat-samsung/gpio.c +++ /dev/null @@ -1,167 +0,0 @@ -/* linux/arch/arm/plat-s3c/gpio.c - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C series GPIO core - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/spinlock.h> - -#include <plat/gpio-core.h> - -#ifdef CONFIG_S3C_GPIO_TRACK -struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END]; - -static __init void s3c_gpiolib_track(struct s3c_gpio_chip *chip) -{ - unsigned int gpn; - int i; - - gpn = chip->chip.base; - for (i = 0; i < chip->chip.ngpio; i++, gpn++) { - BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios)); - s3c_gpios[gpn] = chip; - } -} -#endif /* CONFIG_S3C_GPIO_TRACK */ - -/* Default routines for controlling GPIO, based on the original S3C24XX - * GPIO functions which deal with the case where each gpio bank of the - * chip is as following: - * - * base + 0x00: Control register, 2 bits per gpio - * gpio n: 2 bits starting at (2*n) - * 00 = input, 01 = output, others mean special-function - * base + 0x04: Data register, 1 bit per gpio - * bit n: data bit n -*/ - -static int s3c_gpiolib_input(struct gpio_chip *chip, unsigned offset) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long flags; - unsigned long con; - - s3c_gpio_lock(ourchip, flags); - - con = __raw_readl(base + 0x00); - con &= ~(3 << (offset * 2)); - - __raw_writel(con, base + 0x00); - - s3c_gpio_unlock(ourchip, flags); - return 0; -} - -static int s3c_gpiolib_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long flags; - unsigned long dat; - unsigned long con; - - s3c_gpio_lock(ourchip, flags); - - dat = __raw_readl(base + 0x04); - dat &= ~(1 << offset); - if (value) - dat |= 1 << offset; - __raw_writel(dat, base + 0x04); - - con = __raw_readl(base + 0x00); - con &= ~(3 << (offset * 2)); - con |= 1 << (offset * 2); - - __raw_writel(con, base + 0x00); - __raw_writel(dat, base + 0x04); - - s3c_gpio_unlock(ourchip, flags); - return 0; -} - -static void s3c_gpiolib_set(struct gpio_chip *chip, - unsigned offset, int value) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long flags; - unsigned long dat; - - s3c_gpio_lock(ourchip, flags); - - dat = __raw_readl(base + 0x04); - dat &= ~(1 << offset); - if (value) - dat |= 1 << offset; - __raw_writel(dat, base + 0x04); - - s3c_gpio_unlock(ourchip, flags); -} - -static int s3c_gpiolib_get(struct gpio_chip *chip, unsigned offset) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - unsigned long val; - - val = __raw_readl(ourchip->base + 0x04); - val >>= offset; - val &= 1; - - return val; -} - -__init void s3c_gpiolib_add(struct s3c_gpio_chip *chip) -{ - struct gpio_chip *gc = &chip->chip; - int ret; - - BUG_ON(!chip->base); - BUG_ON(!gc->label); - BUG_ON(!gc->ngpio); - - spin_lock_init(&chip->lock); - - if (!gc->direction_input) - gc->direction_input = s3c_gpiolib_input; - if (!gc->direction_output) - gc->direction_output = s3c_gpiolib_output; - if (!gc->set) - gc->set = s3c_gpiolib_set; - if (!gc->get) - gc->get = s3c_gpiolib_get; - -#ifdef CONFIG_PM - if (chip->pm != NULL) { - if (!chip->pm->save || !chip->pm->resume) - printk(KERN_ERR "gpio: %s has missing PM functions\n", - gc->label); - } else - printk(KERN_ERR "gpio: %s has no PM function\n", gc->label); -#endif - - /* gpiochip_add() prints own failure message on error. */ - ret = gpiochip_add(gc); - if (ret >= 0) - s3c_gpiolib_track(chip); -} - -int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset) -{ - struct s3c_gpio_chip *s3c_chip = container_of(chip, - struct s3c_gpio_chip, chip); - - return s3c_chip->irq_base + offset; -} diff --git a/arch/arm/plat-s3c24xx/include/plat/audio-simtec.h b/arch/arm/plat-samsung/include/plat/audio-simtec.h index de5e88fdcb3..5345364e742 100644 --- a/arch/arm/plat-s3c24xx/include/plat/audio-simtec.h +++ b/arch/arm/plat-samsung/include/plat/audio-simtec.h @@ -1,4 +1,4 @@ -/* arch/arm/plat-s3c24xx/include/plat/audio-simtec.h +/* arch/arm/plat-samsung/include/plat/audio-simtec.h * * Copyright 2008 Simtec Electronics * http://armlinux.simtec.co.uk/ diff --git a/arch/arm/plat-samsung/include/plat/backlight.h b/arch/arm/plat-samsung/include/plat/backlight.h index 51d8da846a6..ad530c78fe8 100644 --- a/arch/arm/plat-samsung/include/plat/backlight.h +++ b/arch/arm/plat-samsung/include/plat/backlight.h @@ -20,7 +20,7 @@ struct samsung_bl_gpio_info { int func; }; -extern void samsung_bl_set(struct samsung_bl_gpio_info *gpio_info, +extern void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info, struct platform_pwm_backlight_data *bl_data); #endif /* __ASM_PLAT_BACKLIGHT_H */ diff --git a/arch/arm/plat-s5p/include/plat/camport.h b/arch/arm/plat-samsung/include/plat/camport.h index 71688c8ba28..a5708bf84b3 100644 --- a/arch/arm/plat-s5p/include/plat/camport.h +++ b/arch/arm/plat-samsung/include/plat/camport.h @@ -8,8 +8,8 @@ * published by the Free Software Foundation. */ -#ifndef PLAT_S5P_CAMPORT_H_ -#define PLAT_S5P_CAMPORT_H_ __FILE__ +#ifndef __PLAT_SAMSUNG_CAMPORT_H_ +#define __PLAT_SAMSUNG_CAMPORT_H_ __FILE__ enum s5p_camport_id { S5P_CAMPORT_A, @@ -25,4 +25,4 @@ enum s5p_camport_id { int s5pv210_fimc_setup_gpio(enum s5p_camport_id id); int exynos4_fimc_setup_gpio(enum s5p_camport_id id); -#endif +#endif /* __PLAT_SAMSUNG_CAMPORT_H */ diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h index 87d5b38a86f..73c66d4d10f 100644 --- a/arch/arm/plat-samsung/include/plat/clock.h +++ b/arch/arm/plat-samsung/include/plat/clock.h @@ -9,6 +9,9 @@ * published by the Free Software Foundation. */ +#ifndef __ASM_PLAT_CLOCK_H +#define __ASM_PLAT_CLOCK_H __FILE__ + #include <linux/spinlock.h> #include <linux/clkdev.h> @@ -121,3 +124,8 @@ extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable); extern void s3c_pwmclk_init(void); +/* Global watchdog clock used by arch_wtd_reset() callback */ + +extern struct clk *s3c2410_wdtclk; + +#endif /* __ASM_PLAT_CLOCK_H */ diff --git a/arch/arm/plat-s3c24xx/include/plat/common-smdk.h b/arch/arm/plat-samsung/include/plat/common-smdk.h index 58d9094c935..ba028f1ed30 100644 --- a/arch/arm/plat-s3c24xx/include/plat/common-smdk.h +++ b/arch/arm/plat-samsung/include/plat/common-smdk.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/plat-s3c24xx/common-smdk.h +/* linux/arch/arm/plat-samsung/include/plat/common-smdk.h * * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h index d623235ae96..dac4760c0f0 100644 --- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h +++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h @@ -1,4 +1,4 @@ -/* arch/arm/plat-s3c/include/plat/cpu-freq.h +/* arch/arm/plat-samsung/include/plat/cpu-freq-core.h * * Copyright (c) 2006-2009 Simtec Electronics * http://armlinux.simtec.co.uk/ @@ -195,7 +195,8 @@ struct s3c_cpufreq_info { extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info); -extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, unsigned int plls_no); +extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, + unsigned int plls_no); /* exports and utilities for debugfs */ extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void); diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index c0a5741b23e..54f370f0fc0 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -1,9 +1,12 @@ /* linux/arch/arm/plat-samsung/include/plat/cpu.h * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * * Copyright (c) 2004-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * - * Header file for S3C24XX CPU support + * Header file for Samsung CPU support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -15,6 +18,108 @@ #ifndef __SAMSUNG_PLAT_CPU_H #define __SAMSUNG_PLAT_CPU_H +extern unsigned long samsung_cpu_id; + +#define S3C24XX_CPU_ID 0x32400000 +#define S3C24XX_CPU_MASK 0xFFF00000 + +#define S3C6400_CPU_ID 0x36400000 +#define S3C6410_CPU_ID 0x36410000 +#define S3C64XX_CPU_ID (S3C6400_CPU_ID & S3C6410_CPU_ID) +#define S3C64XX_CPU_MASK 0xFFFFF000 + +#define S5P6440_CPU_ID 0x56440000 +#define S5P6450_CPU_ID 0x36450000 +#define S5P64XX_CPU_MASK 0xFFFFF000 + +#define S5PC100_CPU_ID 0x43100000 +#define S5PC100_CPU_MASK 0xFFFFF000 + +#define S5PV210_CPU_ID 0x43110000 +#define S5PV210_CPU_MASK 0xFFFFF000 + +#define EXYNOS4210_CPU_ID 0x43210000 +#define EXYNOS4212_CPU_ID 0x43220000 +#define EXYNOS4412_CPU_ID 0xE4412200 +#define EXYNOS4_CPU_MASK 0xFFFE0000 + +#define IS_SAMSUNG_CPU(name, id, mask) \ +static inline int is_samsung_##name(void) \ +{ \ + return ((samsung_cpu_id & mask) == (id & mask)); \ +} + +IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK) +IS_SAMSUNG_CPU(s3c64xx, S3C64XX_CPU_ID, S3C64XX_CPU_MASK) +IS_SAMSUNG_CPU(s5p6440, S5P6440_CPU_ID, S5P64XX_CPU_MASK) +IS_SAMSUNG_CPU(s5p6450, S5P6450_CPU_ID, S5P64XX_CPU_MASK) +IS_SAMSUNG_CPU(s5pc100, S5PC100_CPU_ID, S5PC100_CPU_MASK) +IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK) +IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK) +IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK) +IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK) + +#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \ + defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \ + defined(CONFIG_CPU_S3C2442) || defined(CONFIG_CPU_S3C244X) || \ + defined(CONFIG_CPU_S3C2443) +# define soc_is_s3c24xx() is_samsung_s3c24xx() +#else +# define soc_is_s3c24xx() 0 +#endif + +#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410) +# define soc_is_s3c64xx() is_samsung_s3c64xx() +#else +# define soc_is_s3c64xx() 0 +#endif + +#if defined(CONFIG_CPU_S5P6440) +# define soc_is_s5p6440() is_samsung_s5p6440() +#else +# define soc_is_s5p6440() 0 +#endif + +#if defined(CONFIG_CPU_S5P6450) +# define soc_is_s5p6450() is_samsung_s5p6450() +#else +# define soc_is_s5p6450() 0 +#endif + +#if defined(CONFIG_CPU_S5PC100) +# define soc_is_s5pc100() is_samsung_s5pc100() +#else +# define soc_is_s5pc100() 0 +#endif + +#if defined(CONFIG_CPU_S5PV210) +# define soc_is_s5pv210() is_samsung_s5pv210() +#else +# define soc_is_s5pv210() 0 +#endif + +#if defined(CONFIG_CPU_EXYNOS4210) +# define soc_is_exynos4210() is_samsung_exynos4210() +#else +# define soc_is_exynos4210() 0 +#endif + +#if defined(CONFIG_SOC_EXYNOS4212) +# define soc_is_exynos4212() is_samsung_exynos4212() +#else +# define soc_is_exynos4212() 0 +#endif + +#if defined(CONFIG_SOC_EXYNOS4412) +# define soc_is_exynos4412() is_samsung_exynos4412() +#else +# define soc_is_exynos4412() 0 +#endif + +#define EXYNOS4210_REV_0 (0x0) +#define EXYNOS4210_REV_1_0 (0x10) +#define EXYNOS4210_REV_1_1 (0x11) + #define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE } #ifndef MHZ @@ -55,6 +160,12 @@ extern void s3c64xx_init_io(struct map_desc *mach_desc, int size); extern void s5p_init_io(struct map_desc *mach_desc, int size, void __iomem *cpuid_addr); +extern void s3c24xx_init_cpu(void); +extern void s3c64xx_init_cpu(void); +extern void s5p_init_cpu(void __iomem *cpuid_addr); + +extern unsigned int samsung_rev(void); + extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no); extern void s3c24xx_init_clocks(int xtal); diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index 24ebb1e1de4..ab633c9c2ae 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -30,30 +30,24 @@ extern struct s3c24xx_uart_resources s5p_uart_resources[]; extern struct platform_device *s3c24xx_uart_devs[]; extern struct platform_device *s3c24xx_uart_src[]; -extern struct platform_device s3c_device_timer[]; - +extern struct platform_device s3c64xx_device_ac97; extern struct platform_device s3c64xx_device_iis0; extern struct platform_device s3c64xx_device_iis1; extern struct platform_device s3c64xx_device_iisv4; - -extern struct platform_device s3c64xx_device_spi0; -extern struct platform_device s3c64xx_device_spi1; - -extern struct platform_device samsung_asoc_dma; -extern struct platform_device samsung_asoc_idma; - +extern struct platform_device s3c64xx_device_onenand1; extern struct platform_device s3c64xx_device_pcm0; extern struct platform_device s3c64xx_device_pcm1; +extern struct platform_device s3c64xx_device_spi0; +extern struct platform_device s3c64xx_device_spi1; -extern struct platform_device s3c64xx_device_ac97; - -extern struct platform_device s3c_device_ts; - +extern struct platform_device s3c_device_adc; +extern struct platform_device s3c_device_cfcon; extern struct platform_device s3c_device_fb; -extern struct platform_device s5p_device_fimd0; -extern struct platform_device s3c_device_ohci; -extern struct platform_device s3c_device_lcd; -extern struct platform_device s3c_device_wdt; +extern struct platform_device s3c_device_hwmon; +extern struct platform_device s3c_device_hsmmc0; +extern struct platform_device s3c_device_hsmmc1; +extern struct platform_device s3c_device_hsmmc2; +extern struct platform_device s3c_device_hsmmc3; extern struct platform_device s3c_device_i2c0; extern struct platform_device s3c_device_i2c1; extern struct platform_device s3c_device_i2c2; @@ -62,93 +56,90 @@ extern struct platform_device s3c_device_i2c4; extern struct platform_device s3c_device_i2c5; extern struct platform_device s3c_device_i2c6; extern struct platform_device s3c_device_i2c7; +extern struct platform_device s3c_device_iis; +extern struct platform_device s3c_device_lcd; +extern struct platform_device s3c_device_nand; +extern struct platform_device s3c_device_ohci; +extern struct platform_device s3c_device_onenand; extern struct platform_device s3c_device_rtc; -extern struct platform_device s3c_device_adc; extern struct platform_device s3c_device_sdi; -extern struct platform_device s3c_device_iis; -extern struct platform_device s3c_device_hwmon; -extern struct platform_device s3c_device_hsmmc0; -extern struct platform_device s3c_device_hsmmc1; -extern struct platform_device s3c_device_hsmmc2; -extern struct platform_device s3c_device_hsmmc3; -extern struct platform_device s3c_device_cfcon; - extern struct platform_device s3c_device_spi0; extern struct platform_device s3c_device_spi1; - -extern struct platform_device s5pc100_device_spi0; -extern struct platform_device s5pc100_device_spi1; -extern struct platform_device s5pc100_device_spi2; -extern struct platform_device s5pv210_device_spi0; -extern struct platform_device s5pv210_device_spi1; -extern struct platform_device s5p64x0_device_spi0; -extern struct platform_device s5p64x0_device_spi1; - -extern struct platform_device s3c_device_hwmon; - -extern struct platform_device s3c_device_nand; -extern struct platform_device s3c_device_onenand; -extern struct platform_device s3c64xx_device_onenand1; -extern struct platform_device s5p_device_onenand; - +extern struct platform_device s3c_device_ts; +extern struct platform_device s3c_device_timer[]; extern struct platform_device s3c_device_usbgadget; -extern struct platform_device s3c_device_usb_hsudc; extern struct platform_device s3c_device_usb_hsotg; +extern struct platform_device s3c_device_usb_hsudc; +extern struct platform_device s3c_device_wdt; -extern struct platform_device s5pv210_device_ac97; -extern struct platform_device s5pv210_device_pcm0; -extern struct platform_device s5pv210_device_pcm1; -extern struct platform_device s5pv210_device_pcm2; -extern struct platform_device s5pv210_device_iis0; -extern struct platform_device s5pv210_device_iis1; -extern struct platform_device s5pv210_device_iis2; -extern struct platform_device s5pv210_device_spdif; - -extern struct platform_device exynos4_device_ac97; -extern struct platform_device exynos4_device_pcm0; -extern struct platform_device exynos4_device_pcm1; -extern struct platform_device exynos4_device_pcm2; -extern struct platform_device exynos4_device_i2s0; -extern struct platform_device exynos4_device_i2s1; -extern struct platform_device exynos4_device_i2s2; -extern struct platform_device exynos4_device_spdif; -extern struct platform_device exynos4_device_pd[]; -extern struct platform_device exynos4_device_ahci; -extern struct platform_device exynos4_device_dwmci; +extern struct platform_device s5p_device_ehci; +extern struct platform_device s5p_device_fimc0; +extern struct platform_device s5p_device_fimc1; +extern struct platform_device s5p_device_fimc2; +extern struct platform_device s5p_device_fimc3; +extern struct platform_device s5p_device_fimc_md; +extern struct platform_device s5p_device_fimd0; +extern struct platform_device s5p_device_hdmi; +extern struct platform_device s5p_device_i2c_hdmiphy; +extern struct platform_device s5p_device_mfc; +extern struct platform_device s5p_device_mfc_l; +extern struct platform_device s5p_device_mfc_r; +extern struct platform_device s5p_device_mipi_csis0; +extern struct platform_device s5p_device_mipi_csis1; +extern struct platform_device s5p_device_mixer; +extern struct platform_device s5p_device_onenand; +extern struct platform_device s5p_device_sdo; -extern struct platform_device s5p6440_device_pcm; extern struct platform_device s5p6440_device_iis; +extern struct platform_device s5p6440_device_pcm; extern struct platform_device s5p6450_device_iis0; extern struct platform_device s5p6450_device_iis1; extern struct platform_device s5p6450_device_iis2; extern struct platform_device s5p6450_device_pcm0; +extern struct platform_device s5p64x0_device_spi0; +extern struct platform_device s5p64x0_device_spi1; + extern struct platform_device s5pc100_device_ac97; -extern struct platform_device s5pc100_device_pcm0; -extern struct platform_device s5pc100_device_pcm1; extern struct platform_device s5pc100_device_iis0; extern struct platform_device s5pc100_device_iis1; extern struct platform_device s5pc100_device_iis2; +extern struct platform_device s5pc100_device_pcm0; +extern struct platform_device s5pc100_device_pcm1; extern struct platform_device s5pc100_device_spdif; +extern struct platform_device s5pc100_device_spi0; +extern struct platform_device s5pc100_device_spi1; +extern struct platform_device s5pc100_device_spi2; -extern struct platform_device samsung_device_keypad; - -extern struct platform_device s5p_device_fimc0; -extern struct platform_device s5p_device_fimc1; -extern struct platform_device s5p_device_fimc2; -extern struct platform_device s5p_device_fimc3; - -extern struct platform_device s5p_device_mfc; -extern struct platform_device s5p_device_mfc_l; -extern struct platform_device s5p_device_mfc_r; -extern struct platform_device s5p_device_mipi_csis0; -extern struct platform_device s5p_device_mipi_csis1; - -extern struct platform_device s5p_device_ehci; +extern struct platform_device s5pv210_device_ac97; +extern struct platform_device s5pv210_device_iis0; +extern struct platform_device s5pv210_device_iis1; +extern struct platform_device s5pv210_device_iis2; +extern struct platform_device s5pv210_device_pcm0; +extern struct platform_device s5pv210_device_pcm1; +extern struct platform_device s5pv210_device_pcm2; +extern struct platform_device s5pv210_device_spdif; +extern struct platform_device s5pv210_device_spi0; +extern struct platform_device s5pv210_device_spi1; +extern struct platform_device exynos4_device_ac97; +extern struct platform_device exynos4_device_ahci; +extern struct platform_device exynos4_device_dwmci; +extern struct platform_device exynos4_device_i2s0; +extern struct platform_device exynos4_device_i2s1; +extern struct platform_device exynos4_device_i2s2; +extern struct platform_device exynos4_device_pcm0; +extern struct platform_device exynos4_device_pcm1; +extern struct platform_device exynos4_device_pcm2; +extern struct platform_device exynos4_device_pd[]; +extern struct platform_device exynos4_device_spdif; extern struct platform_device exynos4_device_sysmmu; +extern struct platform_device samsung_asoc_dma; +extern struct platform_device samsung_asoc_idma; +extern struct platform_device samsung_device_keypad; + /* s3c2440 specific devices */ #ifdef CONFIG_CPU_S3C2440 diff --git a/arch/arm/plat-samsung/include/plat/dma-ops.h b/arch/arm/plat-samsung/include/plat/dma-ops.h new file mode 100644 index 00000000000..4c1a363526c --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/dma-ops.h @@ -0,0 +1,63 @@ +/* arch/arm/plat-samsung/include/plat/dma-ops.h + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung DMA support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __SAMSUNG_DMA_OPS_H_ +#define __SAMSUNG_DMA_OPS_H_ __FILE__ + +#include <linux/dmaengine.h> + +struct samsung_dma_prep_info { + enum dma_transaction_type cap; + enum dma_data_direction direction; + dma_addr_t buf; + unsigned long period; + unsigned long len; + void (*fp)(void *data); + void *fp_param; +}; + +struct samsung_dma_info { + enum dma_transaction_type cap; + enum dma_data_direction direction; + enum dma_slave_buswidth width; + dma_addr_t fifo; + struct s3c2410_dma_client *client; +}; + +struct samsung_dma_ops { + unsigned (*request)(enum dma_ch ch, struct samsung_dma_info *info); + int (*release)(unsigned ch, struct s3c2410_dma_client *client); + int (*prepare)(unsigned ch, struct samsung_dma_prep_info *info); + int (*trigger)(unsigned ch); + int (*started)(unsigned ch); + int (*flush)(unsigned ch); + int (*stop)(unsigned ch); +}; + +extern void *samsung_dmadev_get_ops(void); +extern void *s3c_dma_get_ops(void); + +static inline void *__samsung_dma_get_ops(void) +{ + if (samsung_dma_is_dmadev()) + return samsung_dmadev_get_ops(); + else + return s3c_dma_get_ops(); +} + +/* + * samsung_dma_get_ops + * get the set of samsung dma operations + */ +#define samsung_dma_get_ops() __samsung_dma_get_ops() + +#endif /* __SAMSUNG_DMA_OPS_H_ */ diff --git a/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h b/arch/arm/plat-samsung/include/plat/dma-pl330.h index 81074421312..2e55e595867 100644 --- a/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h +++ b/arch/arm/plat-samsung/include/plat/dma-pl330.h @@ -8,11 +8,8 @@ * (at your option) any later version. */ -#ifndef __S3C_DMA_PL330_H_ -#define __S3C_DMA_PL330_H_ - -#define S3C2410_DMAF_AUTOSTART (1 << 0) -#define S3C2410_DMAF_CIRCULAR (1 << 1) +#ifndef __DMA_PL330_H_ +#define __DMA_PL330_H_ __FILE__ /* * PL330 can assign any channel to communicate with @@ -20,7 +17,7 @@ * For the sake of consistency across client drivers, * We keep the channel names unchanged and only add * missing peripherals are added. - * Order is not important since S3C PL330 API driver + * Order is not important since DMA PL330 API driver * use these just as IDs. */ enum dma_ch { @@ -88,11 +85,20 @@ enum dma_ch { DMACH_MAX, }; -static inline bool s3c_dma_has_circular(void) +struct s3c2410_dma_client { + char *name; +}; + +static inline bool samsung_dma_has_circular(void) +{ + return true; +} + +static inline bool samsung_dma_is_dmadev(void) { return true; } -#include <plat/dma.h> +#include <plat/dma-ops.h> -#endif /* __S3C_DMA_PL330_H_ */ +#endif /* __DMA_PL330_H_ */ diff --git a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h index 336d5ac0203..1c1ed548125 100644 --- a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h +++ b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h @@ -18,11 +18,6 @@ extern struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS]; #define DMA_CH_VALID (1<<31) #define DMA_CH_NEVER (1<<30) -struct s3c24xx_dma_addr { - unsigned long from; - unsigned long to; -}; - /* struct s3c24xx_dma_map * * this holds the mapping information for the channel selected @@ -31,7 +26,6 @@ struct s3c24xx_dma_addr { struct s3c24xx_dma_map { const char *name; - struct s3c24xx_dma_addr hw_addr; unsigned long channels[S3C_DMA_CHANNELS]; unsigned long channels_rx[S3C_DMA_CHANNELS]; @@ -47,7 +41,7 @@ struct s3c24xx_dma_selection { void (*direction)(struct s3c2410_dma_chan *chan, struct s3c24xx_dma_map *map, - enum s3c2410_dmasrc dir); + enum dma_data_direction dir); }; extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel); diff --git a/arch/arm/plat-samsung/include/plat/dma.h b/arch/arm/plat-samsung/include/plat/dma.h index 8c273b7a6f5..b9061128abd 100644 --- a/arch/arm/plat-samsung/include/plat/dma.h +++ b/arch/arm/plat-samsung/include/plat/dma.h @@ -10,17 +10,14 @@ * published by the Free Software Foundation. */ +#include <linux/dma-mapping.h> + enum s3c2410_dma_buffresult { S3C2410_RES_OK, S3C2410_RES_ERR, S3C2410_RES_ABORT }; -enum s3c2410_dmasrc { - S3C2410_DMASRC_HW, /* source is memory */ - S3C2410_DMASRC_MEM /* source is hardware */ -}; - /* enum s3c2410_chan_op * * operation codes passed to the DMA code by the user, and also used @@ -112,7 +109,7 @@ extern int s3c2410_dma_config(enum dma_ch channel, int xferunit); */ extern int s3c2410_dma_devconfig(enum dma_ch channel, - enum s3c2410_dmasrc source, unsigned long devaddr); + enum dma_data_direction source, unsigned long devaddr); /* s3c2410_dma_getposition * @@ -126,3 +123,4 @@ extern int s3c2410_dma_set_opfn(enum dma_ch, s3c2410_dma_opfn_t rtn); extern int s3c2410_dma_set_buffdone_fn(enum dma_ch, s3c2410_dma_cbfn_t rtn); +#include <plat/dma-ops.h> diff --git a/arch/arm/plat-s5p/include/plat/ehci.h b/arch/arm/plat-samsung/include/plat/ehci.h index 6ae6810c756..5f28cae1858 100644 --- a/arch/arm/plat-s5p/include/plat/ehci.h +++ b/arch/arm/plat-samsung/include/plat/ehci.h @@ -8,8 +8,8 @@ * option) any later version. */ -#ifndef __PLAT_S5P_EHCI_H -#define __PLAT_S5P_EHCI_H +#ifndef __PLAT_SAMSUNG_EHCI_H +#define __PLAT_SAMSUNG_EHCI_H __FILE__ struct s5p_ehci_platdata { int (*phy_init)(struct platform_device *pdev, int type); @@ -18,4 +18,4 @@ struct s5p_ehci_platdata { extern void s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd); -#endif /* __PLAT_S5P_EHCI_H */ +#endif /* __PLAT_SAMSUNG_EHCI_H */ diff --git a/arch/arm/plat-s5p/include/plat/exynos4.h b/arch/arm/plat-samsung/include/plat/exynos4.h index 907caab53dc..20d73bf7753 100644 --- a/arch/arm/plat-s5p/include/plat/exynos4.h +++ b/arch/arm/plat-samsung/include/plat/exynos4.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s5p/include/plat/exynos4.h +/* linux/arch/arm/plat-samsung/include/plat/exynos4.h * * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com @@ -14,10 +14,11 @@ extern void exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); extern void exynos4_register_clocks(void); +extern void exynos4210_register_clocks(void); +extern void exynos4212_register_clocks(void); extern void exynos4_setup_clocks(void); -#ifdef CONFIG_CPU_EXYNOS4210 - +#ifdef CONFIG_ARCH_EXYNOS4 extern int exynos4_init(void); extern void exynos4_init_irq(void); extern void exynos4_map_io(void); diff --git a/arch/arm/plat-samsung/include/plat/fb-s3c2410.h b/arch/arm/plat-samsung/include/plat/fb-s3c2410.h new file mode 100644 index 00000000000..4e5d9588b5b --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/fb-s3c2410.h @@ -0,0 +1,72 @@ +/* arch/arm/plat-samsung/include/plat/fb-s3c2410.h + * + * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org> + * + * Inspired by pxafb.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_FB_S3C2410_H +#define __ASM_PLAT_FB_S3C2410_H __FILE__ + +struct s3c2410fb_hw { + unsigned long lcdcon1; + unsigned long lcdcon2; + unsigned long lcdcon3; + unsigned long lcdcon4; + unsigned long lcdcon5; +}; + +/* LCD description */ +struct s3c2410fb_display { + /* LCD type */ + unsigned type; + + /* Screen size */ + unsigned short width; + unsigned short height; + + /* Screen info */ + unsigned short xres; + unsigned short yres; + unsigned short bpp; + + unsigned pixclock; /* pixclock in picoseconds */ + unsigned short left_margin; /* value in pixels (TFT) or HCLKs (STN) */ + unsigned short right_margin; /* value in pixels (TFT) or HCLKs (STN) */ + unsigned short hsync_len; /* value in pixels (TFT) or HCLKs (STN) */ + unsigned short upper_margin; /* value in lines (TFT) or 0 (STN) */ + unsigned short lower_margin; /* value in lines (TFT) or 0 (STN) */ + unsigned short vsync_len; /* value in lines (TFT) or 0 (STN) */ + + /* lcd configuration registers */ + unsigned long lcdcon5; +}; + +struct s3c2410fb_mach_info { + + struct s3c2410fb_display *displays; /* attached diplays info */ + unsigned num_displays; /* number of defined displays */ + unsigned default_display; + + /* GPIOs */ + + unsigned long gpcup; + unsigned long gpcup_mask; + unsigned long gpccon; + unsigned long gpccon_mask; + unsigned long gpdup; + unsigned long gpdup_mask; + unsigned long gpdcon; + unsigned long gpdcon_mask; + + /* lpc3600 control register */ + unsigned long lpcsel; +}; + +extern void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *); + +#endif /* __ASM_PLAT_FB_S3C2410_H */ diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h index 01f10e4d00c..0fedf47fa50 100644 --- a/arch/arm/plat-samsung/include/plat/fb.h +++ b/arch/arm/plat-samsung/include/plat/fb.h @@ -109,4 +109,11 @@ extern void s5pv210_fb_gpio_setup_24bpp(void); */ extern void exynos4_fimd0_gpio_setup_24bpp(void); +/** + * s5p64x0_fb_gpio_setup_24bpp() - S5P6440/S5P6450 setup function for 24bpp LCD + * + * Initialise the GPIO for an 24bpp LCD display on the RGB interface. + */ +extern void s5p64x0_fb_gpio_setup_24bpp(void); + #endif /* __PLAT_S3C_FB_H */ diff --git a/arch/arm/plat-s3c24xx/include/plat/fiq.h b/arch/arm/plat-samsung/include/plat/fiq.h index 8521b8372c5..535d06a3562 100644 --- a/arch/arm/plat-s3c24xx/include/plat/fiq.h +++ b/arch/arm/plat-samsung/include/plat/fiq.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/plat-s3c24xx/fiq.h +/* linux/arch/arm/plat-samsung/include/plat/fiq.h * * Copyright (c) 2009 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h index 9a4e53d5296..a181d7ce81c 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h @@ -1,11 +1,11 @@ -/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg-helper.h +/* linux/arch/arm/plat-samsung/include/plat/gpio-cfg-helper.h * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * - * S3C Platform - GPIO pin configuration helper definitions + * Samsung Platform - GPIO pin configuration helper definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -24,120 +24,30 @@ * by disabling interrupts. */ -static inline int s3c_gpio_do_setcfg(struct s3c_gpio_chip *chip, - unsigned int off, unsigned int config) +static inline int samsung_gpio_do_setcfg(struct samsung_gpio_chip *chip, + unsigned int off, unsigned int config) { return (chip->config->set_config)(chip, off, config); } -static inline unsigned s3c_gpio_do_getcfg(struct s3c_gpio_chip *chip, - unsigned int off) +static inline unsigned samsung_gpio_do_getcfg(struct samsung_gpio_chip *chip, + unsigned int off) { return (chip->config->get_config)(chip, off); } -static inline int s3c_gpio_do_setpull(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull) +static inline int samsung_gpio_do_setpull(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull) { return (chip->config->set_pull)(chip, off, pull); } -static inline s3c_gpio_pull_t s3c_gpio_do_getpull(struct s3c_gpio_chip *chip, - unsigned int off) +static inline samsung_gpio_pull_t samsung_gpio_do_getpull(struct samsung_gpio_chip *chip, + unsigned int off) { return chip->config->get_pull(chip, off); } -/** - * s3c_gpio_setcfg_s3c24xx - S3C24XX style GPIO configuration. - * @chip: The gpio chip that is being configured. - * @off: The offset for the GPIO being configured. - * @cfg: The configuration value to set. - * - * This helper deal with the GPIO cases where the control register - * has two bits of configuration per gpio, which have the following - * functions: - * 00 = input - * 01 = output - * 1x = special function -*/ -extern int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, - unsigned int off, unsigned int cfg); - -/** - * s3c_gpio_getcfg_s3c24xx - S3C24XX style GPIO configuration read. - * @chip: The gpio chip that is being configured. - * @off: The offset for the GPIO being configured. - * - * The reverse of s3c_gpio_setcfg_s3c24xx(). Will return a value whicg - * could be directly passed back to s3c_gpio_setcfg_s3c24xx(), from the - * S3C_GPIO_SPECIAL() macro. - */ -unsigned int s3c_gpio_getcfg_s3c24xx(struct s3c_gpio_chip *chip, - unsigned int off); - -/** - * s3c_gpio_setcfg_s3c24xx_a - S3C24XX style GPIO configuration (Bank A) - * @chip: The gpio chip that is being configured. - * @off: The offset for the GPIO being configured. - * @cfg: The configuration value to set. - * - * This helper deal with the GPIO cases where the control register - * has one bit of configuration for the gpio, where setting the bit - * means the pin is in special function mode and unset means output. -*/ -extern int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip, - unsigned int off, unsigned int cfg); - - -/** - * s3c_gpio_getcfg_s3c24xx_a - S3C24XX style GPIO configuration read (Bank A) - * @chip: The gpio chip that is being configured. - * @off: The offset for the GPIO being configured. - * - * The reverse of s3c_gpio_setcfg_s3c24xx_a() turning an GPIO into a usable - * GPIO configuration value. - * - * @sa s3c_gpio_getcfg_s3c24xx - * @sa s3c_gpio_getcfg_s3c64xx_4bit - */ -extern unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip, - unsigned int off); - -/** - * s3c_gpio_setcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config. - * @chip: The gpio chip that is being configured. - * @off: The offset for the GPIO being configured. - * @cfg: The configuration value to set. - * - * This helper deal with the GPIO cases where the control register has 4 bits - * of control per GPIO, generally in the form of: - * 0000 = Input - * 0001 = Output - * others = Special functions (dependent on bank) - * - * Note, since the code to deal with the case where there are two control - * registers instead of one, we do not have a separate set of functions for - * each case. -*/ -extern int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, - unsigned int off, unsigned int cfg); - - -/** - * s3c_gpio_getcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config read. - * @chip: The gpio chip that is being configured. - * @off: The offset for the GPIO being configured. - * - * The reverse of s3c_gpio_setcfg_s3c64xx_4bit(), turning a gpio configuration - * register setting into a value the software can use, such as could be passed - * to s3c_gpio_setcfg_s3c64xx_4bit(). - * - * @sa s3c_gpio_getcfg_s3c24xx - */ -extern unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, - unsigned int off); - /* Pull-{up,down} resistor controls. * * S3C2410,S3C2440 = Pull-UP, @@ -147,7 +57,7 @@ extern unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, */ /** - * s3c_gpio_setpull_1up() - Pull configuration for choice of up or none. + * s3c24xx_gpio_setpull_1up() - Pull configuration for choice of up or none. * @chip: The gpio chip that is being configured. * @off: The offset for the GPIO being configured. * @param: pull: The pull mode being requested. @@ -155,11 +65,11 @@ extern unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, * This is a helper function for the case where we have GPIOs with one * bit configuring the presence of a pull-up resistor. */ -extern int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull); +extern int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull); /** - * s3c_gpio_setpull_1down() - Pull configuration for choice of down or none + * s3c24xx_gpio_setpull_1down() - Pull configuration for choice of down or none * @chip: The gpio chip that is being configured * @off: The offset for the GPIO being configured * @param: pull: The pull mode being requested @@ -167,11 +77,13 @@ extern int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip, * This is a helper function for the case where we have GPIOs with one * bit configuring the presence of a pull-down resistor. */ -extern int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull); +extern int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull); /** - * s3c_gpio_setpull_upown() - Pull configuration for choice of up, down or none + * samsung_gpio_setpull_upown() - Pull configuration for choice of up, + * down or none + * * @chip: The gpio chip that is being configured. * @off: The offset for the GPIO being configured. * @param: pull: The pull mode being requested. @@ -183,45 +95,46 @@ extern int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip, * 01 = Pull-up resistor connected * 10 = Pull-down resistor connected */ -extern int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull); - +extern int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull); /** - * s3c_gpio_getpull_updown() - Get configuration for choice of up, down or none + * samsung_gpio_getpull_updown() - Get configuration for choice of up, + * down or none + * * @chip: The gpio chip that the GPIO pin belongs to * @off: The offset to the pin to get the configuration of. * - * This helper function reads the state of the pull-{up,down} resistor for the - * given GPIO in the same case as s3c_gpio_setpull_upown. + * This helper function reads the state of the pull-{up,down} resistor + * for the given GPIO in the same case as samsung_gpio_setpull_upown. */ -extern s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip, - unsigned int off); +extern samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip, + unsigned int off); /** - * s3c_gpio_getpull_1up() - Get configuration for choice of up or none + * s3c24xx_gpio_getpull_1up() - Get configuration for choice of up or none * @chip: The gpio chip that the GPIO pin belongs to * @off: The offset to the pin to get the configuration of. * * This helper function reads the state of the pull-up resistor for the - * given GPIO in the same case as s3c_gpio_setpull_1up. + * given GPIO in the same case as s3c24xx_gpio_setpull_1up. */ -extern s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip, - unsigned int off); +extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip, + unsigned int off); /** - * s3c_gpio_getpull_1down() - Get configuration for choice of down or none + * s3c24xx_gpio_getpull_1down() - Get configuration for choice of down or none * @chip: The gpio chip that the GPIO pin belongs to * @off: The offset to the pin to get the configuration of. * * This helper function reads the state of the pull-down resistor for the - * given GPIO in the same case as s3c_gpio_setpull_1down. + * given GPIO in the same case as s3c24xx_gpio_setpull_1down. */ -extern s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip, - unsigned int off); +extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip, + unsigned int off); /** - * s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443. + * s3c2443_gpio_setpull() - Pull configuration for s3c2443. * @chip: The gpio chip that is being configured. * @off: The offset for the GPIO being configured. * @param: pull: The pull mode being requested. @@ -233,19 +146,18 @@ extern s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip, * 10 = Pull-down resistor connected * x1 = No pull up resistor */ -extern int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull); +extern int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull); /** - * s3c_gpio_getpull_s3c2443() - Get configuration for s3c2443 pull resistors + * s3c2443_gpio_getpull() - Get configuration for s3c2443 pull resistors * @chip: The gpio chip that the GPIO pin belongs to. * @off: The offset to the pin to get the configuration of. * * This helper function reads the state of the pull-{up,down} resistor for the - * given GPIO in the same case as s3c_gpio_setpull_upown. + * given GPIO in the same case as samsung_gpio_setpull_upown. */ -extern s3c_gpio_pull_t s3c_gpio_getpull_s3c2443(struct s3c_gpio_chip *chip, +extern samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip, unsigned int off); #endif /* __PLAT_GPIO_CFG_HELPERS_H */ - diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index 1762dcb4cb9..d48245bb02b 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -24,14 +24,14 @@ #ifndef __PLAT_GPIO_CFG_H #define __PLAT_GPIO_CFG_H __FILE__ -typedef unsigned int __bitwise__ s3c_gpio_pull_t; +typedef unsigned int __bitwise__ samsung_gpio_pull_t; typedef unsigned int __bitwise__ s5p_gpio_drvstr_t; /* forward declaration if gpio-core.h hasn't been included */ -struct s3c_gpio_chip; +struct samsung_gpio_chip; /** - * struct s3c_gpio_cfg GPIO configuration + * struct samsung_gpio_cfg GPIO configuration * @cfg_eint: Configuration setting when used for external interrupt source * @get_pull: Read the current pull configuration for the GPIO * @set_pull: Set the current pull configuraiton for the GPIO @@ -44,20 +44,20 @@ struct s3c_gpio_chip; * per-bank configuration information that other systems such as the * external interrupt code will need. * - * @sa s3c_gpio_cfgpin + * @sa samsung_gpio_cfgpin * @sa s3c_gpio_getcfg * @sa s3c_gpio_setpull * @sa s3c_gpio_getpull */ -struct s3c_gpio_cfg { +struct samsung_gpio_cfg { unsigned int cfg_eint; - s3c_gpio_pull_t (*get_pull)(struct s3c_gpio_chip *chip, unsigned offs); - int (*set_pull)(struct s3c_gpio_chip *chip, unsigned offs, - s3c_gpio_pull_t pull); + samsung_gpio_pull_t (*get_pull)(struct samsung_gpio_chip *chip, unsigned offs); + int (*set_pull)(struct samsung_gpio_chip *chip, unsigned offs, + samsung_gpio_pull_t pull); - unsigned (*get_config)(struct s3c_gpio_chip *chip, unsigned offs); - int (*set_config)(struct s3c_gpio_chip *chip, unsigned offs, + unsigned (*get_config)(struct samsung_gpio_chip *chip, unsigned offs); + int (*set_config)(struct samsung_gpio_chip *chip, unsigned offs, unsigned config); }; @@ -69,7 +69,7 @@ struct s3c_gpio_cfg { #define S3C_GPIO_OUTPUT (S3C_GPIO_SPECIAL(1)) #define S3C_GPIO_SFN(x) (S3C_GPIO_SPECIAL(x)) -#define s3c_gpio_is_cfg_special(_cfg) \ +#define samsung_gpio_is_cfg_special(_cfg) \ (((_cfg) & S3C_GPIO_SPECIAL_MARK) == S3C_GPIO_SPECIAL_MARK) /** @@ -128,9 +128,9 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr, * up or down settings, and it may be dependent on the chip that is being * used to whether the particular mode is available. */ -#define S3C_GPIO_PULL_NONE ((__force s3c_gpio_pull_t)0x00) -#define S3C_GPIO_PULL_DOWN ((__force s3c_gpio_pull_t)0x01) -#define S3C_GPIO_PULL_UP ((__force s3c_gpio_pull_t)0x02) +#define S3C_GPIO_PULL_NONE ((__force samsung_gpio_pull_t)0x00) +#define S3C_GPIO_PULL_DOWN ((__force samsung_gpio_pull_t)0x01) +#define S3C_GPIO_PULL_UP ((__force samsung_gpio_pull_t)0x02) /** * s3c_gpio_setpull() - set the state of a gpio pin pull resistor @@ -143,7 +143,7 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr, * * @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP. */ -extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull); +extern int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull); /** * s3c_gpio_getpull() - get the pull resistor state of a gpio pin @@ -151,7 +151,7 @@ extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull); * * Read the pull resistor value for the specified pin. */ -extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin); +extern samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin); /* configure `all` aspects of an gpio */ @@ -170,7 +170,7 @@ extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin); * @sa s3c_gpio_cfgpin_range */ extern int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr, - unsigned int cfg, s3c_gpio_pull_t pull); + unsigned int cfg, samsung_gpio_pull_t pull); static inline int s3c_gpio_cfgrange_nopull(unsigned int pin, unsigned int size, unsigned int cfg) diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h index 8cad4cf19c3..1fe6917f6a2 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-core.h +++ b/arch/arm/plat-samsung/include/plat/gpio-core.h @@ -25,22 +25,22 @@ * specific code. */ -struct s3c_gpio_chip; +struct samsung_gpio_chip; /** - * struct s3c_gpio_pm - power management (suspend/resume) information + * struct samsung_gpio_pm - power management (suspend/resume) information * @save: Routine to save the state of the GPIO block * @resume: Routine to resume the GPIO block. */ -struct s3c_gpio_pm { - void (*save)(struct s3c_gpio_chip *chip); - void (*resume)(struct s3c_gpio_chip *chip); +struct samsung_gpio_pm { + void (*save)(struct samsung_gpio_chip *chip); + void (*resume)(struct samsung_gpio_chip *chip); }; -struct s3c_gpio_cfg; +struct samsung_gpio_cfg; /** - * struct s3c_gpio_chip - wrapper for specific implementation of gpio + * struct samsung_gpio_chip - wrapper for specific implementation of gpio * @chip: The chip structure to be exported via gpiolib. * @base: The base pointer to the gpio configuration registers. * @group: The group register number for gpio interrupt support. @@ -60,10 +60,10 @@ struct s3c_gpio_cfg; * CPU cores trying to get one lock for different GPIO banks, where each * bank of GPIO has its own register space and configuration registers. */ -struct s3c_gpio_chip { +struct samsung_gpio_chip { struct gpio_chip chip; - struct s3c_gpio_cfg *config; - struct s3c_gpio_pm *pm; + struct samsung_gpio_cfg *config; + struct samsung_gpio_pm *pm; void __iomem *base; int irq_base; int group; @@ -73,58 +73,11 @@ struct s3c_gpio_chip { #endif }; -static inline struct s3c_gpio_chip *to_s3c_gpio(struct gpio_chip *gpc) +static inline struct samsung_gpio_chip *to_samsung_gpio(struct gpio_chip *gpc) { - return container_of(gpc, struct s3c_gpio_chip, chip); + return container_of(gpc, struct samsung_gpio_chip, chip); } -/** s3c_gpiolib_add() - add the s3c specific version of a gpio_chip. - * @chip: The chip to register - * - * This is a wrapper to gpiochip_add() that takes our specific gpio chip - * information and makes the necessary alterations for the platform and - * notes the information for use with the configuration systems and any - * other parts of the system. - */ -extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip); - -/* CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios - * for use with the configuration calls, and other parts of the s3c gpiolib - * support code. - * - * Not all s3c support code will need this, as some configurations of cpu - * may only support one or two different configuration options and have an - * easy gpio to s3c_gpio_chip mapping function. If this is the case, then - * the machine support file should provide its own s3c_gpiolib_getchip() - * and any other necessary functions. - */ - -/** - * samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config. - * @chip: The gpio chip that is being configured. - * @nr_chips: The no of chips (gpio ports) for the GPIO being configured. - * - * This helper deal with the GPIO cases where the control register has 4 bits - * of control per GPIO, generally in the form of: - * 0000 = Input - * 0001 = Output - * others = Special functions (dependent on bank) - * - * Note, since the code to deal with the case where there are two control - * registers instead of one, we do not have a separate set of function - * (samsung_gpiolib_add_4bit2_chips)for each case. - */ -extern void samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip, - int nr_chips); -extern void samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip, - int nr_chips); -extern void samsung_gpiolib_add_2bit_chips(struct s3c_gpio_chip *chip, - int nr_chips); - -extern void samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip); -extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip); - - /** * samsung_gpiolib_to_irq - convert gpio pin to irq number * @chip: The gpio chip that the pin belongs to. @@ -136,36 +89,36 @@ extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip); extern int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset); /* exported for core SoC support to change */ -extern struct s3c_gpio_cfg s3c24xx_gpiocfg_default; +extern struct samsung_gpio_cfg s3c24xx_gpiocfg_default; #ifdef CONFIG_S3C_GPIO_TRACK -extern struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END]; +extern struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END]; -static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int chip) +static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int chip) { return (chip < S3C_GPIO_END) ? s3c_gpios[chip] : NULL; } #else -/* machine specific code should provide s3c_gpiolib_getchip */ +/* machine specific code should provide samsung_gpiolib_getchip */ #include <mach/gpio-track.h> -static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { } +static inline void s3c_gpiolib_track(struct samsung_gpio_chip *chip) { } #endif #ifdef CONFIG_PM -extern struct s3c_gpio_pm s3c_gpio_pm_1bit; -extern struct s3c_gpio_pm s3c_gpio_pm_2bit; -extern struct s3c_gpio_pm s3c_gpio_pm_4bit; +extern struct samsung_gpio_pm samsung_gpio_pm_1bit; +extern struct samsung_gpio_pm samsung_gpio_pm_2bit; +extern struct samsung_gpio_pm samsung_gpio_pm_4bit; #define __gpio_pm(x) x #else -#define s3c_gpio_pm_1bit NULL -#define s3c_gpio_pm_2bit NULL -#define s3c_gpio_pm_4bit NULL +#define samsung_gpio_pm_1bit NULL +#define samsung_gpio_pm_2bit NULL +#define samsung_gpio_pm_4bit NULL #define __gpio_pm(x) NULL #endif /* CONFIG_PM */ /* locking wrappers to deal with multiple access to the same gpio bank */ -#define s3c_gpio_lock(_oc, _fl) spin_lock_irqsave(&(_oc)->lock, _fl) -#define s3c_gpio_unlock(_oc, _fl) spin_unlock_irqrestore(&(_oc)->lock, _fl) +#define samsung_gpio_lock(_oc, _fl) spin_lock_irqsave(&(_oc)->lock, _fl) +#define samsung_gpio_unlock(_oc, _fl) spin_unlock_irqrestore(&(_oc)->lock, _fl) diff --git a/arch/arm/plat-samsung/include/plat/gpio-fns.h b/arch/arm/plat-samsung/include/plat/gpio-fns.h new file mode 100644 index 00000000000..bab13920176 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/gpio-fns.h @@ -0,0 +1,98 @@ +/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h + * + * Copyright (c) 2003-2009 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 - hardware + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __MACH_GPIO_FNS_H +#define __MACH_GPIO_FNS_H __FILE__ + +/* These functions are in the to-be-removed category and it is strongly + * encouraged not to use these in new code. They will be marked deprecated + * very soon. + * + * Most of the functionality can be either replaced by the gpiocfg calls + * for the s3c platform or by the generic GPIOlib API. + * + * As of 2.6.35-rc, these will be removed, with the few drivers using them + * either replaced or given a wrapper until the calls can be removed. +*/ + +#include <plat/gpio-cfg.h> + +static inline void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int cfg) +{ + /* 1:1 mapping between cfgpin and setcfg calls at the moment */ + s3c_gpio_cfgpin(pin, cfg); +} + +/* external functions for GPIO support + * + * These allow various different clients to access the same GPIO + * registers without conflicting. If your driver only owns the entire + * GPIO register, then it is safe to ioremap/__raw_{read|write} to it. +*/ + +extern unsigned int s3c2410_gpio_getcfg(unsigned int pin); + +/* s3c2410_gpio_getirq + * + * turn the given pin number into the corresponding IRQ number + * + * returns: + * < 0 = no interrupt for this pin + * >=0 = interrupt number for the pin +*/ + +extern int s3c2410_gpio_getirq(unsigned int pin); + +/* s3c2410_gpio_irqfilter + * + * set the irq filtering on the given pin + * + * on = 0 => disable filtering + * 1 => enable filtering + * + * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with + * width of filter (0 through 63) + * + * +*/ + +extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, + unsigned int config); + +/* s3c2410_gpio_pullup + * + * This call should be replaced with s3c_gpio_setpull(). + * + * As a note, there is currently no distinction between pull-up and pull-down + * in the s3c24xx series devices with only an on/off configuration. + */ + +/* s3c2410_gpio_pullup + * + * configure the pull-up control on the given pin + * + * to = 1 => disable the pull-up + * 0 => enable the pull-up + * + * eg; + * + * s3c2410_gpio_pullup(S3C2410_GPB(0), 0); + * s3c2410_gpio_pullup(S3C2410_GPE(8), 0); +*/ + +extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to); + +extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to); + +extern unsigned int s3c2410_gpio_getpin(unsigned int pin); + +#endif /* __MACH_GPIO_FNS_H */ diff --git a/arch/arm/plat-samsung/include/plat/iic.h b/arch/arm/plat-samsung/include/plat/iic.h index 56b0059439e..51d52e767a1 100644 --- a/arch/arm/plat-samsung/include/plat/iic.h +++ b/arch/arm/plat-samsung/include/plat/iic.h @@ -60,6 +60,7 @@ extern void s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *i2c); extern void s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *i2c); extern void s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *i2c); extern void s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *i2c); /* defined by architecture to configure gpio */ extern void s3c_i2c0_cfg_gpio(struct platform_device *dev); diff --git a/arch/arm/plat-s3c24xx/include/plat/irq.h b/arch/arm/plat-samsung/include/plat/irq.h index ec087d6054b..e21a89bc26c 100644 --- a/arch/arm/plat-s3c24xx/include/plat/irq.h +++ b/arch/arm/plat-samsung/include/plat/irq.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/plat-s3c24xx/irq.h +/* linux/arch/arm/plat-samsung/include/plat/irq.h * * Copyright (c) 2004-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -25,9 +25,9 @@ extern struct irq_chip s3c_irq_level_chip; extern struct irq_chip s3c_irq_chip; -static inline void -s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit, - int subcheck) +static inline void s3c_irqsub_mask(unsigned int irqno, + unsigned int parentbit, + int subcheck) { unsigned long mask; unsigned long submask; @@ -39,17 +39,16 @@ s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit, /* check to see if we need to mask the parent IRQ */ - if ((submask & subcheck) == subcheck) { + if ((submask & subcheck) == subcheck) __raw_writel(mask | parentbit, S3C2410_INTMSK); - } /* write back masks */ __raw_writel(submask, S3C2410_INTSUBMSK); } -static inline void -s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit) +static inline void s3c_irqsub_unmask(unsigned int irqno, + unsigned int parentbit) { unsigned long mask; unsigned long submask; @@ -66,8 +65,9 @@ s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit) } -static inline void -s3c_irqsub_maskack(unsigned int irqno, unsigned int parentmask, unsigned int group) +static inline void s3c_irqsub_maskack(unsigned int irqno, + unsigned int parentmask, + unsigned int group) { unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0); @@ -86,8 +86,9 @@ s3c_irqsub_maskack(unsigned int irqno, unsigned int parentmask, unsigned int gro } } -static inline void -s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group) +static inline void s3c_irqsub_ack(unsigned int irqno, + unsigned int parentmask, + unsigned int group) { unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0); diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-samsung/include/plat/irqs.h index ba9121c60a2..94ecf8c5c85 100644 --- a/arch/arm/plat-s5p/include/plat/irqs.h +++ b/arch/arm/plat-samsung/include/plat/irqs.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s5p/include/plat/irqs.h +/* linux/arch/arm/plat-samsung/include/plat/irqs.h * * Copyright (c) 2009 Samsung Electronics Co., Ltd. * http://www.samsung.com/ @@ -10,8 +10,8 @@ * published by the Free Software Foundation. */ -#ifndef __ASM_PLAT_S5P_IRQS_H -#define __ASM_PLAT_S5P_IRQS_H __FILE__ +#ifndef __PLAT_SAMSUNG_IRQS_H +#define __PLAT_SAMSUNG_IRQS_H __FILE__ /* we keep the first set of CPU IRQs out of the range of * the ISA space, so that the PC104 has them to itself @@ -112,4 +112,4 @@ #define S5P_IRQ_TYPE_EDGE_RISING (0x03) #define S5P_IRQ_TYPE_EDGE_BOTH (0x04) -#endif /* __ASM_PLAT_S5P_IRQS_H */ +#endif /* __PLAT_SAMSUNG_IRQS_H */ diff --git a/arch/arm/plat-samsung/include/plat/map-s3c.h b/arch/arm/plat-samsung/include/plat/map-s3c.h new file mode 100644 index 00000000000..7d048759b77 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/map-s3c.h @@ -0,0 +1,84 @@ +/* linux/arch/arm/plat-samsung/include/plat/map-s3c.h + * + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C24XX - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_MAP_S3C_H +#define __ASM_PLAT_MAP_S3C_H __FILE__ + +#define S3C24XX_VA_IRQ S3C_VA_IRQ +#define S3C24XX_VA_MEMCTRL S3C_VA_MEM +#define S3C24XX_VA_UART S3C_VA_UART + +#define S3C24XX_VA_TIMER S3C_VA_TIMER +#define S3C24XX_VA_CLKPWR S3C_VA_SYS +#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG + +#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000) +#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00010000) + +#define S3C2410_PA_UART (0x50000000) +#define S3C24XX_PA_UART S3C2410_PA_UART + +#ifndef S3C_UART_OFFSET +#define S3C_UART_OFFSET (0x400) +#endif + +/* + * GPIO ports + * + * the calculation for the VA of this must ensure that + * it is the same distance apart from the UART in the + * phsyical address space, as the initial mapping for the IO + * is done as a 1:1 mapping. This puts it (currently) at + * 0xFA800000, which is not in the way of any current mapping + * by the base system. +*/ + +#define S3C2410_PA_GPIO (0x56000000) +#define S3C24XX_PA_GPIO S3C2410_PA_GPIO + +#define S3C24XX_VA_GPIO ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART) +#define S3C64XX_VA_GPIO S3C_ADDR_CPU(0x00000000) + +#define S3C64XX_VA_MODEM S3C_ADDR_CPU(0x00100000) +#define S3C64XX_VA_USB_HSPHY S3C_ADDR_CPU(0x00200000) + +#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY + +/* + * ISA style IO, for each machine to sort out mappings for, + * if it implements it. We reserve two 16M regions for ISA. + */ + +#define S3C2410_ADDR(x) S3C_ADDR(x) + +#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000) +#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000) + +/* deal with the registers that move under the 2412/2413 */ + +#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) +#ifndef __ASSEMBLY__ +extern void __iomem *s3c24xx_va_gpio2; +#endif +#ifdef CONFIG_CPU_S3C2412_ONLY +#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10) +#else +#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2 +#endif +#else +#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO +#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO +#endif + +#include <plat/map-s5p.h> + +#endif /* __ASM_PLAT_MAP_S3C_H */ diff --git a/arch/arm/plat-s5p/include/plat/map-s5p.h b/arch/arm/plat-samsung/include/plat/map-s5p.h index 36d3551173b..c2d7bdae589 100644 --- a/arch/arm/plat-s5p/include/plat/map-s5p.h +++ b/arch/arm/plat-samsung/include/plat/map-s5p.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s5p/include/plat/map-s5p.h +/* linux/arch/arm/plat-samsung/include/plat/map-s5p.h * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com/ @@ -40,8 +40,6 @@ #define S5P_VA_GIC_CPU S3C_ADDR(0x02810000) #define S5P_VA_GIC_DIST S3C_ADDR(0x02820000) -#define S3C_VA_USB_HSPHY S3C_ADDR(0x02900000) - #define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000)) #define VA_VIC0 VA_VIC(0) #define VA_VIC1 VA_VIC(1) @@ -58,4 +56,6 @@ #define S3C_UART_OFFSET (0x400) #endif +#include <plat/map-s3c.h> + #endif /* __ASM_PLAT_MAP_S5P_H */ diff --git a/arch/arm/plat-s3c24xx/include/plat/mci.h b/arch/arm/plat-samsung/include/plat/mci.h index 2ac2b21ec49..c42d3171194 100644 --- a/arch/arm/plat-s3c24xx/include/plat/mci.h +++ b/arch/arm/plat-samsung/include/plat/mci.h @@ -27,11 +27,11 @@ * to a non-zero value, otherwise the default of 3.2-3.4V is used. */ struct s3c24xx_mci_pdata { - unsigned int no_wprotect : 1; - unsigned int no_detect : 1; - unsigned int wprotect_invert : 1; - unsigned int detect_invert : 1; /* set => detect active high. */ - unsigned int use_dma : 1; + unsigned int no_wprotect:1; + unsigned int no_detect:1; + unsigned int wprotect_invert:1; + unsigned int detect_invert:1; /* set => detect active high */ + unsigned int use_dma:1; unsigned int gpio_detect; unsigned int gpio_wprotect; diff --git a/arch/arm/plat-s5p/include/plat/mfc.h b/arch/arm/plat-samsung/include/plat/mfc.h index 6697f8cb294..ac13227272f 100644 --- a/arch/arm/plat-s5p/include/plat/mfc.h +++ b/arch/arm/plat-samsung/include/plat/mfc.h @@ -7,8 +7,8 @@ * option) any later version. */ -#ifndef __PLAT_S5P_MFC_H -#define __PLAT_S5P_MFC_H +#ifndef __PLAT_SAMSUNG_MFC_H +#define __PLAT_SAMSUNG_MFC_H __FILE__ /** * s5p_mfc_reserve_mem - function to early reserve memory for MFC driver @@ -24,4 +24,4 @@ void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize, phys_addr_t lbase, unsigned int lsize); -#endif /* __PLAT_S5P_MFC_H */ +#endif /* __PLAT_SAMSUNG_MFC_H */ diff --git a/arch/arm/plat-s5p/include/plat/mipi_csis.h b/arch/arm/plat-samsung/include/plat/mipi_csis.h index 9bd254c5ed2..c45b1e8d4c2 100644 --- a/arch/arm/plat-s5p/include/plat/mipi_csis.h +++ b/arch/arm/plat-samsung/include/plat/mipi_csis.h @@ -8,8 +8,8 @@ * published by the Free Software Foundation. */ -#ifndef PLAT_S5P_MIPI_CSIS_H_ -#define PLAT_S5P_MIPI_CSIS_H_ __FILE__ +#ifndef __PLAT_SAMSUNG_MIPI_CSIS_H_ +#define __PLAT_SAMSUNG_MIPI_CSIS_H_ __FILE__ struct platform_device; @@ -40,4 +40,4 @@ struct s5p_platform_mipi_csis { */ int s5p_csis_phy_enable(struct platform_device *pdev, bool on); -#endif /* PLAT_S5P_MIPI_CSIS_H_ */ +#endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */ diff --git a/arch/arm/plat-samsung/include/plat/pll.h b/arch/arm/plat-samsung/include/plat/pll.h new file mode 100644 index 00000000000..357af7c1c66 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/pll.h @@ -0,0 +1,323 @@ +/* linux/arch/arm/plat-samsung/include/plat/pll.h + * + * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * Samsung PLL codes + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <asm/div64.h> + +#define S3C24XX_PLL_MDIV_MASK (0xFF) +#define S3C24XX_PLL_PDIV_MASK (0x1F) +#define S3C24XX_PLL_SDIV_MASK (0x3) +#define S3C24XX_PLL_MDIV_SHIFT (12) +#define S3C24XX_PLL_PDIV_SHIFT (4) +#define S3C24XX_PLL_SDIV_SHIFT (0) + +static inline unsigned int s3c24xx_get_pll(unsigned int pllval, + unsigned int baseclk) +{ + unsigned int mdiv, pdiv, sdiv; + uint64_t fvco; + + mdiv = (pllval >> S3C24XX_PLL_MDIV_SHIFT) & S3C24XX_PLL_MDIV_MASK; + pdiv = (pllval >> S3C24XX_PLL_PDIV_SHIFT) & S3C24XX_PLL_PDIV_MASK; + sdiv = (pllval >> S3C24XX_PLL_SDIV_SHIFT) & S3C24XX_PLL_SDIV_MASK; + + fvco = (uint64_t)baseclk * (mdiv + 8); + do_div(fvco, (pdiv + 2) << sdiv); + + return (unsigned int)fvco; +} + +#define S3C2416_PLL_MDIV_MASK (0x3FF) +#define S3C2416_PLL_PDIV_MASK (0x3F) +#define S3C2416_PLL_SDIV_MASK (0x7) +#define S3C2416_PLL_MDIV_SHIFT (14) +#define S3C2416_PLL_PDIV_SHIFT (5) +#define S3C2416_PLL_SDIV_SHIFT (0) + +static inline unsigned int s3c2416_get_pll(unsigned int pllval, + unsigned int baseclk) +{ + unsigned int mdiv, pdiv, sdiv; + uint64_t fvco; + + mdiv = (pllval >> S3C2416_PLL_MDIV_SHIFT) & S3C2416_PLL_MDIV_MASK; + pdiv = (pllval >> S3C2416_PLL_PDIV_SHIFT) & S3C2416_PLL_PDIV_MASK; + sdiv = (pllval >> S3C2416_PLL_SDIV_SHIFT) & S3C2416_PLL_SDIV_MASK; + + fvco = (uint64_t)baseclk * mdiv; + do_div(fvco, (pdiv << sdiv)); + + return (unsigned int)fvco; +} + +#define S3C6400_PLL_MDIV_MASK (0x3FF) +#define S3C6400_PLL_PDIV_MASK (0x3F) +#define S3C6400_PLL_SDIV_MASK (0x7) +#define S3C6400_PLL_MDIV_SHIFT (16) +#define S3C6400_PLL_PDIV_SHIFT (8) +#define S3C6400_PLL_SDIV_SHIFT (0) + +static inline unsigned long s3c6400_get_pll(unsigned long baseclk, + u32 pllcon) +{ + u32 mdiv, pdiv, sdiv; + u64 fvco = baseclk; + + mdiv = (pllcon >> S3C6400_PLL_MDIV_SHIFT) & S3C6400_PLL_MDIV_MASK; + pdiv = (pllcon >> S3C6400_PLL_PDIV_SHIFT) & S3C6400_PLL_PDIV_MASK; + sdiv = (pllcon >> S3C6400_PLL_SDIV_SHIFT) & S3C6400_PLL_SDIV_MASK; + + fvco *= mdiv; + do_div(fvco, (pdiv << sdiv)); + + return (unsigned long)fvco; +} + +#define PLL6553X_MDIV_MASK (0x7F) +#define PLL6553X_PDIV_MASK (0x1F) +#define PLL6553X_SDIV_MASK (0x3) +#define PLL6553X_KDIV_MASK (0xFFFF) +#define PLL6553X_MDIV_SHIFT (16) +#define PLL6553X_PDIV_SHIFT (8) +#define PLL6553X_SDIV_SHIFT (0) + +static inline unsigned long s3c_get_pll6553x(unsigned long baseclk, + u32 pll_con0, u32 pll_con1) +{ + unsigned long result; + u32 mdiv, pdiv, sdiv, kdiv; + u64 tmp; + + mdiv = (pll_con0 >> PLL6553X_MDIV_SHIFT) & PLL6553X_MDIV_MASK; + pdiv = (pll_con0 >> PLL6553X_PDIV_SHIFT) & PLL6553X_PDIV_MASK; + sdiv = (pll_con0 >> PLL6553X_SDIV_SHIFT) & PLL6553X_SDIV_MASK; + kdiv = pll_con1 & PLL6553X_KDIV_MASK; + + /* + * We need to multiple baseclk by mdiv (the integer part) and kdiv + * which is in 2^16ths, so shift mdiv up (does not overflow) and + * add kdiv before multiplying. The use of tmp is to avoid any + * overflows before shifting bac down into result when multipling + * by the mdiv and kdiv pair. + */ + + tmp = baseclk; + tmp *= (mdiv << 16) + kdiv; + do_div(tmp, (pdiv << sdiv)); + result = tmp >> 16; + + return result; +} + +#define PLL35XX_MDIV_MASK (0x3FF) +#define PLL35XX_PDIV_MASK (0x3F) +#define PLL35XX_SDIV_MASK (0x7) +#define PLL35XX_MDIV_SHIFT (16) +#define PLL35XX_PDIV_SHIFT (8) +#define PLL35XX_SDIV_SHIFT (0) + +static inline unsigned long s5p_get_pll35xx(unsigned long baseclk, u32 pll_con) +{ + u32 mdiv, pdiv, sdiv; + u64 fvco = baseclk; + + mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK; + pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK; + sdiv = (pll_con >> PLL35XX_SDIV_SHIFT) & PLL35XX_SDIV_MASK; + + fvco *= mdiv; + do_div(fvco, (pdiv << sdiv)); + + return (unsigned long)fvco; +} + +#define PLL36XX_KDIV_MASK (0xFFFF) +#define PLL36XX_MDIV_MASK (0x1FF) +#define PLL36XX_PDIV_MASK (0x3F) +#define PLL36XX_SDIV_MASK (0x7) +#define PLL36XX_MDIV_SHIFT (16) +#define PLL36XX_PDIV_SHIFT (8) +#define PLL36XX_SDIV_SHIFT (0) + +static inline unsigned long s5p_get_pll36xx(unsigned long baseclk, + u32 pll_con0, u32 pll_con1) +{ + unsigned long result; + u32 mdiv, pdiv, sdiv, kdiv; + u64 tmp; + + mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK; + pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK; + sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK; + kdiv = pll_con1 & PLL36XX_KDIV_MASK; + + tmp = baseclk; + + tmp *= (mdiv << 16) + kdiv; + do_div(tmp, (pdiv << sdiv)); + result = tmp >> 16; + + return result; +} + +#define PLL45XX_MDIV_MASK (0x3FF) +#define PLL45XX_PDIV_MASK (0x3F) +#define PLL45XX_SDIV_MASK (0x7) +#define PLL45XX_MDIV_SHIFT (16) +#define PLL45XX_PDIV_SHIFT (8) +#define PLL45XX_SDIV_SHIFT (0) + +enum pll45xx_type_t { + pll_4500, + pll_4502, + pll_4508 +}; + +static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con, + enum pll45xx_type_t pll_type) +{ + u32 mdiv, pdiv, sdiv; + u64 fvco = baseclk; + + mdiv = (pll_con >> PLL45XX_MDIV_SHIFT) & PLL45XX_MDIV_MASK; + pdiv = (pll_con >> PLL45XX_PDIV_SHIFT) & PLL45XX_PDIV_MASK; + sdiv = (pll_con >> PLL45XX_SDIV_SHIFT) & PLL45XX_SDIV_MASK; + + if (pll_type == pll_4508) + sdiv = sdiv - 1; + + fvco *= mdiv; + do_div(fvco, (pdiv << sdiv)); + + return (unsigned long)fvco; +} + +/* CON0 bit-fields */ +#define PLL46XX_MDIV_MASK (0x1FF) +#define PLL46XX_PDIV_MASK (0x3F) +#define PLL46XX_SDIV_MASK (0x7) +#define PLL46XX_LOCKED_SHIFT (29) +#define PLL46XX_MDIV_SHIFT (16) +#define PLL46XX_PDIV_SHIFT (8) +#define PLL46XX_SDIV_SHIFT (0) + +/* CON1 bit-fields */ +#define PLL46XX_MRR_MASK (0x1F) +#define PLL46XX_MFR_MASK (0x3F) +#define PLL46XX_KDIV_MASK (0xFFFF) +#define PLL4650C_KDIV_MASK (0xFFF) +#define PLL46XX_MRR_SHIFT (24) +#define PLL46XX_MFR_SHIFT (16) +#define PLL46XX_KDIV_SHIFT (0) + +enum pll46xx_type_t { + pll_4600, + pll_4650, + pll_4650c, +}; + +static inline unsigned long s5p_get_pll46xx(unsigned long baseclk, + u32 pll_con0, u32 pll_con1, + enum pll46xx_type_t pll_type) +{ + unsigned long result; + u32 mdiv, pdiv, sdiv, kdiv; + u64 tmp; + + mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK; + pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK; + sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK; + kdiv = pll_con1 & PLL46XX_KDIV_MASK; + + if (pll_type == pll_4650c) + kdiv = pll_con1 & PLL4650C_KDIV_MASK; + else + kdiv = pll_con1 & PLL46XX_KDIV_MASK; + + tmp = baseclk; + + if (pll_type == pll_4600) { + tmp *= (mdiv << 16) + kdiv; + do_div(tmp, (pdiv << sdiv)); + result = tmp >> 16; + } else { + tmp *= (mdiv << 10) + kdiv; + do_div(tmp, (pdiv << sdiv)); + result = tmp >> 10; + } + + return result; +} + +#define PLL90XX_MDIV_MASK (0xFF) +#define PLL90XX_PDIV_MASK (0x3F) +#define PLL90XX_SDIV_MASK (0x7) +#define PLL90XX_KDIV_MASK (0xffff) +#define PLL90XX_LOCKED_SHIFT (29) +#define PLL90XX_MDIV_SHIFT (16) +#define PLL90XX_PDIV_SHIFT (8) +#define PLL90XX_SDIV_SHIFT (0) +#define PLL90XX_KDIV_SHIFT (0) + +static inline unsigned long s5p_get_pll90xx(unsigned long baseclk, + u32 pll_con, u32 pll_conk) +{ + unsigned long result; + u32 mdiv, pdiv, sdiv, kdiv; + u64 tmp; + + mdiv = (pll_con >> PLL90XX_MDIV_SHIFT) & PLL90XX_MDIV_MASK; + pdiv = (pll_con >> PLL90XX_PDIV_SHIFT) & PLL90XX_PDIV_MASK; + sdiv = (pll_con >> PLL90XX_SDIV_SHIFT) & PLL90XX_SDIV_MASK; + kdiv = pll_conk & PLL90XX_KDIV_MASK; + + /* + * We need to multiple baseclk by mdiv (the integer part) and kdiv + * which is in 2^16ths, so shift mdiv up (does not overflow) and + * add kdiv before multiplying. The use of tmp is to avoid any + * overflows before shifting bac down into result when multipling + * by the mdiv and kdiv pair. + */ + + tmp = baseclk; + tmp *= (mdiv << 16) + kdiv; + do_div(tmp, (pdiv << sdiv)); + result = tmp >> 16; + + return result; +} + +#define PLL65XX_MDIV_MASK (0x3FF) +#define PLL65XX_PDIV_MASK (0x3F) +#define PLL65XX_SDIV_MASK (0x7) +#define PLL65XX_MDIV_SHIFT (16) +#define PLL65XX_PDIV_SHIFT (8) +#define PLL65XX_SDIV_SHIFT (0) + +static inline unsigned long s5p_get_pll65xx(unsigned long baseclk, u32 pll_con) +{ + u32 mdiv, pdiv, sdiv; + u64 fvco = baseclk; + + mdiv = (pll_con >> PLL65XX_MDIV_SHIFT) & PLL65XX_MDIV_MASK; + pdiv = (pll_con >> PLL65XX_PDIV_SHIFT) & PLL65XX_PDIV_MASK; + sdiv = (pll_con >> PLL65XX_SDIV_SHIFT) & PLL65XX_SDIV_MASK; + + fvco *= mdiv; + do_div(fvco, (pdiv << sdiv)); + + return (unsigned long)fvco; +} diff --git a/arch/arm/plat-samsung/include/plat/pll6553x.h b/arch/arm/plat-samsung/include/plat/pll6553x.h deleted file mode 100644 index b8b7e1d884f..00000000000 --- a/arch/arm/plat-samsung/include/plat/pll6553x.h +++ /dev/null @@ -1,51 +0,0 @@ -/* arch/arm/plat-samsung/include/plat/pll6553x.h - * partially from arch/arm/mach-s3c64xx/include/mach/pll.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * Samsung PLL6553x PLL code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* S3C6400 and compatible (S3C2416, etc.) EPLL code */ - -#define PLL6553X_MDIV_MASK ((1 << (23-16)) - 1) -#define PLL6553X_PDIV_MASK ((1 << (13-8)) - 1) -#define PLL6553X_SDIV_MASK ((1 << (2-0)) - 1) -#define PLL6553X_MDIV_SHIFT (16) -#define PLL6553X_PDIV_SHIFT (8) -#define PLL6553X_SDIV_SHIFT (0) -#define PLL6553X_KDIV_MASK (0xffff) - -static inline unsigned long s3c_get_pll6553x(unsigned long baseclk, - u32 pll0, u32 pll1) -{ - unsigned long result; - u32 mdiv, pdiv, sdiv, kdiv; - u64 tmp; - - mdiv = (pll0 >> PLL6553X_MDIV_SHIFT) & PLL6553X_MDIV_MASK; - pdiv = (pll0 >> PLL6553X_PDIV_SHIFT) & PLL6553X_PDIV_MASK; - sdiv = (pll0 >> PLL6553X_SDIV_SHIFT) & PLL6553X_SDIV_MASK; - kdiv = pll1 & PLL6553X_KDIV_MASK; - - /* We need to multiple baseclk by mdiv (the integer part) and kdiv - * which is in 2^16ths, so shift mdiv up (does not overflow) and - * add kdiv before multiplying. The use of tmp is to avoid any - * overflows before shifting bac down into result when multipling - * by the mdiv and kdiv pair. - */ - - tmp = baseclk; - tmp *= (mdiv << 16) + kdiv; - do_div(tmp, (pdiv << sdiv)); - result = tmp >> 16; - - return result; -} diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h index f6749916d19..dcf68709f9c 100644 --- a/arch/arm/plat-samsung/include/plat/pm.h +++ b/arch/arm/plat-samsung/include/plat/pm.h @@ -165,20 +165,20 @@ extern void s3c_pm_check_store(void); extern void s3c_pm_configure_extint(void); /** - * s3c_pm_restore_gpios() - restore the state of the gpios after sleep. + * samsung_pm_restore_gpios() - restore the state of the gpios after sleep. * * Restore the state of the GPIO pins after sleep, which may involve ensuring * that we do not glitch the state of the pins from that the bootloader's * resume code has done. */ -extern void s3c_pm_restore_gpios(void); +extern void samsung_pm_restore_gpios(void); /** - * s3c_pm_save_gpios() - save the state of the GPIOs for restoring after sleep. + * samsung_pm_save_gpios() - save the state of the GPIOs for restoring after sleep. * - * Save the GPIO states for resotration on resume. See s3c_pm_restore_gpios(). + * Save the GPIO states for resotration on resume. See samsung_pm_restore_gpios(). */ -extern void s3c_pm_save_gpios(void); +extern void samsung_pm_save_gpios(void); extern void s3c_pm_save_core(void); extern void s3c_pm_restore_core(void); diff --git a/arch/arm/mach-exynos4/include/mach/pwm-clock.h b/arch/arm/plat-samsung/include/plat/pwm-clock.h index 8e12090287b..bf6a60eb623 100644 --- a/arch/arm/mach-exynos4/include/mach/pwm-clock.h +++ b/arch/arm/plat-samsung/include/plat/pwm-clock.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-exynos4/include/mach/pwm-clock.h +/* linux/arch/arm/plat-samsung/include/plat/pwm-clock.h * * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com @@ -8,17 +8,15 @@ * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * - * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h - * - * EXYNOS4 - pwm clock and timer support + * SAMSUNG - pwm clock and timer support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifndef __ASM_ARCH_PWMCLK_H -#define __ASM_ARCH_PWMCLK_H __FILE__ +#ifndef __ASM_PLAT_PWM_CLOCK_H +#define __ASM_PLAT_PWM_CLOCK_H __FILE__ /** * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk @@ -29,7 +27,14 @@ */ static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) { - return tcfg == S3C64XX_TCFG1_MUX_TCLK; + if (soc_is_s3c24xx()) + return tcfg == S3C2410_TCFG1_MUX_TCLK; + else if (soc_is_s3c64xx() || soc_is_s5pc100()) + return tcfg >= S3C64XX_TCFG1_MUX_TCLK; + else if (soc_is_s5p6440() || soc_is_s5p6450()) + return 0; + else + return tcfg == S3C64XX_TCFG1_MUX_TCLK; } /** @@ -41,7 +46,10 @@ static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) */ static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) { - return 1 << tcfg1; + if (soc_is_s3c24xx()) + return 1 << (tcfg1 + 1); + else + return 1 << tcfg1; } /** @@ -51,7 +59,10 @@ static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) */ static inline unsigned int pwm_tdiv_has_div1(void) { - return 1; + if (soc_is_s3c24xx()) + return 0; + else + return 1; } /** @@ -62,9 +73,9 @@ static inline unsigned int pwm_tdiv_has_div1(void) */ static inline unsigned long pwm_tdiv_div_bits(unsigned int div) { - return ilog2(div); + if (soc_is_s3c24xx()) + return ilog2(div) - 1; + else + return ilog2(div); } - -#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK - -#endif /* __ASM_ARCH_PWMCLK_H */ +#endif /* __ASM_PLAT_PWM_CLOCK_H */ diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h b/arch/arm/plat-samsung/include/plat/regs-dma.h index 1b0f4c36d38..178bccbe480 100644 --- a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h +++ b/arch/arm/plat-samsung/include/plat/regs-dma.h @@ -1,4 +1,4 @@ -/* arch/arm/mach-s3c2410/include/mach/dma.h +/* arch/arm/plat-samsung/include/plat/regs-dma.h * * Copyright (C) 2003-2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -10,7 +10,8 @@ * published by the Free Software Foundation. */ -/* DMA Register definitions */ +#ifndef __ASM_PLAT_REGS_DMA_H +#define __ASM_PLAT_REGS_DMA_H __FILE__ #define S3C2410_DMA_DISRC (0x00) #define S3C2410_DMA_DISRCC (0x04) @@ -24,74 +25,75 @@ #define S3C2412_DMA_DMAREQSEL (0x24) #define S3C2443_DMA_DMAREQSEL (0x24) -#define S3C2410_DISRCC_INC (1<<0) -#define S3C2410_DISRCC_APB (1<<1) +#define S3C2410_DISRCC_INC (1 << 0) +#define S3C2410_DISRCC_APB (1 << 1) -#define S3C2410_DMASKTRIG_STOP (1<<2) -#define S3C2410_DMASKTRIG_ON (1<<1) -#define S3C2410_DMASKTRIG_SWTRIG (1<<0) +#define S3C2410_DMASKTRIG_STOP (1 << 2) +#define S3C2410_DMASKTRIG_ON (1 << 1) +#define S3C2410_DMASKTRIG_SWTRIG (1 << 0) -#define S3C2410_DCON_DEMAND (0<<31) -#define S3C2410_DCON_HANDSHAKE (1<<31) -#define S3C2410_DCON_SYNC_PCLK (0<<30) -#define S3C2410_DCON_SYNC_HCLK (1<<30) +#define S3C2410_DCON_DEMAND (0 << 31) +#define S3C2410_DCON_HANDSHAKE (1 << 31) +#define S3C2410_DCON_SYNC_PCLK (0 << 30) +#define S3C2410_DCON_SYNC_HCLK (1 << 30) -#define S3C2410_DCON_INTREQ (1<<29) +#define S3C2410_DCON_INTREQ (1 << 29) -#define S3C2410_DCON_CH0_XDREQ0 (0<<24) -#define S3C2410_DCON_CH0_UART0 (1<<24) -#define S3C2410_DCON_CH0_SDI (2<<24) -#define S3C2410_DCON_CH0_TIMER (3<<24) -#define S3C2410_DCON_CH0_USBEP1 (4<<24) +#define S3C2410_DCON_CH0_XDREQ0 (0 << 24) +#define S3C2410_DCON_CH0_UART0 (1 << 24) +#define S3C2410_DCON_CH0_SDI (2 << 24) +#define S3C2410_DCON_CH0_TIMER (3 << 24) +#define S3C2410_DCON_CH0_USBEP1 (4 << 24) -#define S3C2410_DCON_CH1_XDREQ1 (0<<24) -#define S3C2410_DCON_CH1_UART1 (1<<24) -#define S3C2410_DCON_CH1_I2SSDI (2<<24) -#define S3C2410_DCON_CH1_SPI (3<<24) -#define S3C2410_DCON_CH1_USBEP2 (4<<24) +#define S3C2410_DCON_CH1_XDREQ1 (0 << 24) +#define S3C2410_DCON_CH1_UART1 (1 << 24) +#define S3C2410_DCON_CH1_I2SSDI (2 << 24) +#define S3C2410_DCON_CH1_SPI (3 << 24) +#define S3C2410_DCON_CH1_USBEP2 (4 << 24) -#define S3C2410_DCON_CH2_I2SSDO (0<<24) -#define S3C2410_DCON_CH2_I2SSDI (1<<24) -#define S3C2410_DCON_CH2_SDI (2<<24) -#define S3C2410_DCON_CH2_TIMER (3<<24) -#define S3C2410_DCON_CH2_USBEP3 (4<<24) +#define S3C2410_DCON_CH2_I2SSDO (0 << 24) +#define S3C2410_DCON_CH2_I2SSDI (1 << 24) +#define S3C2410_DCON_CH2_SDI (2 << 24) +#define S3C2410_DCON_CH2_TIMER (3 << 24) +#define S3C2410_DCON_CH2_USBEP3 (4 << 24) -#define S3C2410_DCON_CH3_UART2 (0<<24) -#define S3C2410_DCON_CH3_SDI (1<<24) -#define S3C2410_DCON_CH3_SPI (2<<24) -#define S3C2410_DCON_CH3_TIMER (3<<24) -#define S3C2410_DCON_CH3_USBEP4 (4<<24) +#define S3C2410_DCON_CH3_UART2 (0 << 24) +#define S3C2410_DCON_CH3_SDI (1 << 24) +#define S3C2410_DCON_CH3_SPI (2 << 24) +#define S3C2410_DCON_CH3_TIMER (3 << 24) +#define S3C2410_DCON_CH3_USBEP4 (4 << 24) #define S3C2410_DCON_SRCSHIFT (24) -#define S3C2410_DCON_SRCMASK (7<<24) +#define S3C2410_DCON_SRCMASK (7 << 24) -#define S3C2410_DCON_BYTE (0<<20) -#define S3C2410_DCON_HALFWORD (1<<20) -#define S3C2410_DCON_WORD (2<<20) +#define S3C2410_DCON_BYTE (0 << 20) +#define S3C2410_DCON_HALFWORD (1 << 20) +#define S3C2410_DCON_WORD (2 << 20) -#define S3C2410_DCON_AUTORELOAD (0<<22) -#define S3C2410_DCON_NORELOAD (1<<22) -#define S3C2410_DCON_HWTRIG (1<<23) +#define S3C2410_DCON_AUTORELOAD (0 << 22) +#define S3C2410_DCON_NORELOAD (1 << 22) +#define S3C2410_DCON_HWTRIG (1 << 23) #ifdef CONFIG_CPU_S3C2440 -#define S3C2440_DIDSTC_CHKINT (1<<2) -#define S3C2440_DCON_CH0_I2SSDO (5<<24) -#define S3C2440_DCON_CH0_PCMIN (6<<24) +#define S3C2440_DIDSTC_CHKINT (1 << 2) -#define S3C2440_DCON_CH1_PCMOUT (5<<24) -#define S3C2440_DCON_CH1_SDI (6<<24) +#define S3C2440_DCON_CH0_I2SSDO (5 << 24) +#define S3C2440_DCON_CH0_PCMIN (6 << 24) -#define S3C2440_DCON_CH2_PCMIN (5<<24) -#define S3C2440_DCON_CH2_MICIN (6<<24) +#define S3C2440_DCON_CH1_PCMOUT (5 << 24) +#define S3C2440_DCON_CH1_SDI (6 << 24) -#define S3C2440_DCON_CH3_MICIN (5<<24) -#define S3C2440_DCON_CH3_PCMOUT (6<<24) -#endif +#define S3C2440_DCON_CH2_PCMIN (5 << 24) +#define S3C2440_DCON_CH2_MICIN (6 << 24) + +#define S3C2440_DCON_CH3_MICIN (5 << 24) +#define S3C2440_DCON_CH3_PCMOUT (6 << 24) +#endif /* CONFIG_CPU_S3C2440 */ #ifdef CONFIG_CPU_S3C2412 -#define S3C2412_DMAREQSEL_SRC(x) ((x)<<1) +#define S3C2412_DMAREQSEL_SRC(x) ((x) << 1) #define S3C2412_DMAREQSEL_HW (1) @@ -115,10 +117,11 @@ #define S3C2412_DMAREQSEL_UART1_1 S3C2412_DMAREQSEL_SRC(22) #define S3C2412_DMAREQSEL_UART2_0 S3C2412_DMAREQSEL_SRC(23) #define S3C2412_DMAREQSEL_UART2_1 S3C2412_DMAREQSEL_SRC(24) +#endif /* CONFIG_CPU_S3C2412 */ -#endif +#ifdef CONFIG_CPU_S3C2443 -#define S3C2443_DMAREQSEL_SRC(x) ((x)<<1) +#define S3C2443_DMAREQSEL_SRC(x) ((x) << 1) #define S3C2443_DMAREQSEL_HW (1) @@ -141,5 +144,8 @@ #define S3C2443_DMAREQSEL_UART3_0 S3C2443_DMAREQSEL_SRC(25) #define S3C2443_DMAREQSEL_UART3_1 S3C2443_DMAREQSEL_SRC(26) #define S3C2443_DMAREQSEL_PCMOUT S3C2443_DMAREQSEL_SRC(27) -#define S3C2443_DMAREQSEL_PCMIN S3C2443_DMAREQSEL_SRC(28) +#define S3C2443_DMAREQSEL_PCMIN S3C2443_DMAREQSEL_SRC(28) #define S3C2443_DMAREQSEL_MICIN S3C2443_DMAREQSEL_SRC(29) +#endif /* CONFIG_CPU_S3C2443 */ + +#endif /* __ASM_PLAT_REGS_DMA_H */ diff --git a/arch/arm/plat-samsung/include/plat/regs-iis.h b/arch/arm/plat-samsung/include/plat/regs-iis.h new file mode 100644 index 00000000000..a18d35e7a73 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/regs-iis.h @@ -0,0 +1,70 @@ +/* arch/arm/plat-samsung/include/plat/regs-iis.h + * + * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 IIS register definition +*/ + +#ifndef __ASM_ARCH_REGS_IIS_H +#define __ASM_ARCH_REGS_IIS_H + +#define S3C2410_IISCON (0x00) + +#define S3C2410_IISCON_LRINDEX (1 << 8) +#define S3C2410_IISCON_TXFIFORDY (1 << 7) +#define S3C2410_IISCON_RXFIFORDY (1 << 6) +#define S3C2410_IISCON_TXDMAEN (1 << 5) +#define S3C2410_IISCON_RXDMAEN (1 << 4) +#define S3C2410_IISCON_TXIDLE (1 << 3) +#define S3C2410_IISCON_RXIDLE (1 << 2) +#define S3C2410_IISCON_PSCEN (1 << 1) +#define S3C2410_IISCON_IISEN (1 << 0) + +#define S3C2410_IISMOD (0x04) + +#define S3C2440_IISMOD_MPLL (1 << 9) +#define S3C2410_IISMOD_SLAVE (1 << 8) +#define S3C2410_IISMOD_NOXFER (0 << 6) +#define S3C2410_IISMOD_RXMODE (1 << 6) +#define S3C2410_IISMOD_TXMODE (2 << 6) +#define S3C2410_IISMOD_TXRXMODE (3 << 6) +#define S3C2410_IISMOD_LR_LLOW (0 << 5) +#define S3C2410_IISMOD_LR_RLOW (1 << 5) +#define S3C2410_IISMOD_IIS (0 << 4) +#define S3C2410_IISMOD_MSB (1 << 4) +#define S3C2410_IISMOD_8BIT (0 << 3) +#define S3C2410_IISMOD_16BIT (1 << 3) +#define S3C2410_IISMOD_BITMASK (1 << 3) +#define S3C2410_IISMOD_256FS (0 << 2) +#define S3C2410_IISMOD_384FS (1 << 2) +#define S3C2410_IISMOD_16FS (0 << 0) +#define S3C2410_IISMOD_32FS (1 << 0) +#define S3C2410_IISMOD_48FS (2 << 0) +#define S3C2410_IISMOD_FS_MASK (3 << 0) + +#define S3C2410_IISPSR (0x08) + +#define S3C2410_IISPSR_INTMASK (31 << 5) +#define S3C2410_IISPSR_INTSHIFT (5) +#define S3C2410_IISPSR_EXTMASK (31 << 0) +#define S3C2410_IISPSR_EXTSHFIT (0) + +#define S3C2410_IISFCON (0x0c) + +#define S3C2410_IISFCON_TXDMA (1 << 15) +#define S3C2410_IISFCON_RXDMA (1 << 14) +#define S3C2410_IISFCON_TXENABLE (1 << 13) +#define S3C2410_IISFCON_RXENABLE (1 << 12) +#define S3C2410_IISFCON_TXMASK (0x3f << 6) +#define S3C2410_IISFCON_TXSHIFT (6) +#define S3C2410_IISFCON_RXMASK (0x3f) +#define S3C2410_IISFCON_RXSHIFT (0) + +#define S3C2410_IISFIFO (0x10) + +#endif /* __ASM_ARCH_REGS_IIS_H */ diff --git a/arch/arm/plat-samsung/include/plat/regs-spi.h b/arch/arm/plat-samsung/include/plat/regs-spi.h new file mode 100644 index 00000000000..552fe7cfe28 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/regs-spi.h @@ -0,0 +1,48 @@ +/* arch/arm/plat-samsung/include/plat/regs-spi.h + * + * Copyright (c) 2004 Fetron GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 SPI register definition +*/ + +#ifndef __ASM_ARCH_REGS_SPI_H +#define __ASM_ARCH_REGS_SPI_H + +#define S3C2410_SPI1 (0x20) +#define S3C2412_SPI1 (0x100) + +#define S3C2410_SPCON (0x00) + +#define S3C2410_SPCON_SMOD_DMA (2 << 5) /* DMA mode */ +#define S3C2410_SPCON_SMOD_INT (1 << 5) /* interrupt mode */ +#define S3C2410_SPCON_SMOD_POLL (0 << 5) /* polling mode */ +#define S3C2410_SPCON_ENSCK (1 << 4) /* Enable SCK */ +#define S3C2410_SPCON_MSTR (1 << 3) /* Master:1, Slave:0 select */ +#define S3C2410_SPCON_CPOL_HIGH (1 << 2) /* Clock polarity select */ +#define S3C2410_SPCON_CPOL_LOW (0 << 2) /* Clock polarity select */ + +#define S3C2410_SPCON_CPHA_FMTB (1 << 1) /* Clock Phase Select */ +#define S3C2410_SPCON_CPHA_FMTA (0 << 1) /* Clock Phase Select */ + +#define S3C2410_SPSTA (0x04) + +#define S3C2410_SPSTA_DCOL (1 << 2) /* Data Collision Error */ +#define S3C2410_SPSTA_MULD (1 << 1) /* Multi Master Error */ +#define S3C2410_SPSTA_READY (1 << 0) /* Data Tx/Rx ready */ +#define S3C2412_SPSTA_READY_ORG (1 << 3) + +#define S3C2410_SPPIN (0x08) + +#define S3C2410_SPPIN_ENMUL (1 << 2) /* Multi Master Error detect */ +#define S3C2410_SPPIN_RESERVED (1 << 1) +#define S3C2410_SPPIN_KEEP (1 << 0) /* Master Out keep */ + +#define S3C2410_SPPRE (0x0C) +#define S3C2410_SPTDAT (0x10) +#define S3C2410_SPRDAT (0x14) + +#endif /* __ASM_ARCH_REGS_SPI_H */ diff --git a/arch/arm/plat-s5p/include/plat/regs-srom.h b/arch/arm/plat-samsung/include/plat/regs-srom.h index f121ab5e76c..9b6729c81cd 100644 --- a/arch/arm/plat-s5p/include/plat/regs-srom.h +++ b/arch/arm/plat-samsung/include/plat/regs-srom.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s5p/include/plat/regs-srom.h +/* linux/arch/arm/plat-samsung/include/plat/regs-srom.h * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com @@ -10,8 +10,8 @@ * published by the Free Software Foundation. */ -#ifndef __ASM_PLAT_S5P_REGS_SROM_H -#define __ASM_PLAT_S5P_REGS_SROM_H __FILE__ +#ifndef __PLAT_SAMSUNG_REGS_SROM_H +#define __PLAT_SAMSUNG_REGS_SROM_H __FILE__ #include <mach/map.h> @@ -51,4 +51,4 @@ #define S5P_SROM_BCX__TCOS__SHIFT 24 #define S5P_SROM_BCX__TACS__SHIFT 28 -#endif /* __ASM_PLAT_S5P_REGS_SROM_H */ +#endif /* __PLAT_SAMSUNG_REGS_SROM_H */ diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-udc.h b/arch/arm/plat-samsung/include/plat/regs-udc.h index f0dd4a41b37..4003d3dab4e 100644 --- a/arch/arm/plat-s3c24xx/include/plat/regs-udc.h +++ b/arch/arm/plat-samsung/include/plat/regs-udc.h @@ -1,4 +1,4 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-udc.h +/* arch/arm/plat-samsung/include/plat/regs-udc.h * * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at> * @@ -75,79 +75,77 @@ #define S3C2410_UDC_OUT_FIFO_CNT1_REG S3C2410_USBDREG(0x0198) #define S3C2410_UDC_OUT_FIFO_CNT2_REG S3C2410_USBDREG(0x019c) -#define S3C2410_UDC_FUNCADDR_UPDATE (1<<7) +#define S3C2410_UDC_FUNCADDR_UPDATE (1 << 7) -#define S3C2410_UDC_PWR_ISOUP (1<<7) // R/W -#define S3C2410_UDC_PWR_RESET (1<<3) // R -#define S3C2410_UDC_PWR_RESUME (1<<2) // R/W -#define S3C2410_UDC_PWR_SUSPEND (1<<1) // R -#define S3C2410_UDC_PWR_ENSUSPEND (1<<0) // R/W +#define S3C2410_UDC_PWR_ISOUP (1 << 7) /* R/W */ +#define S3C2410_UDC_PWR_RESET (1 << 3) /* R */ +#define S3C2410_UDC_PWR_RESUME (1 << 2) /* R/W */ +#define S3C2410_UDC_PWR_SUSPEND (1 << 1) /* R */ +#define S3C2410_UDC_PWR_ENSUSPEND (1 << 0) /* R/W */ -#define S3C2410_UDC_PWR_DEFAULT 0x00 +#define S3C2410_UDC_PWR_DEFAULT (0x00) -#define S3C2410_UDC_INT_EP4 (1<<4) // R/W (clear only) -#define S3C2410_UDC_INT_EP3 (1<<3) // R/W (clear only) -#define S3C2410_UDC_INT_EP2 (1<<2) // R/W (clear only) -#define S3C2410_UDC_INT_EP1 (1<<1) // R/W (clear only) -#define S3C2410_UDC_INT_EP0 (1<<0) // R/W (clear only) +#define S3C2410_UDC_INT_EP4 (1 << 4) /* R/W (clear only) */ +#define S3C2410_UDC_INT_EP3 (1 << 3) /* R/W (clear only) */ +#define S3C2410_UDC_INT_EP2 (1 << 2) /* R/W (clear only) */ +#define S3C2410_UDC_INT_EP1 (1 << 1) /* R/W (clear only) */ +#define S3C2410_UDC_INT_EP0 (1 << 0) /* R/W (clear only) */ -#define S3C2410_UDC_USBINT_RESET (1<<2) // R/W (clear only) -#define S3C2410_UDC_USBINT_RESUME (1<<1) // R/W (clear only) -#define S3C2410_UDC_USBINT_SUSPEND (1<<0) // R/W (clear only) +#define S3C2410_UDC_USBINT_RESET (1 << 2) /* R/W (clear only) */ +#define S3C2410_UDC_USBINT_RESUME (1 << 1) /* R/W (clear only) */ +#define S3C2410_UDC_USBINT_SUSPEND (1 << 0) /* R/W (clear only) */ -#define S3C2410_UDC_INTE_EP4 (1<<4) // R/W -#define S3C2410_UDC_INTE_EP3 (1<<3) // R/W -#define S3C2410_UDC_INTE_EP2 (1<<2) // R/W -#define S3C2410_UDC_INTE_EP1 (1<<1) // R/W -#define S3C2410_UDC_INTE_EP0 (1<<0) // R/W - -#define S3C2410_UDC_USBINTE_RESET (1<<2) // R/W -#define S3C2410_UDC_USBINTE_SUSPEND (1<<0) // R/W +#define S3C2410_UDC_INTE_EP4 (1 << 4) /* R/W */ +#define S3C2410_UDC_INTE_EP3 (1 << 3) /* R/W */ +#define S3C2410_UDC_INTE_EP2 (1 << 2) /* R/W */ +#define S3C2410_UDC_INTE_EP1 (1 << 1) /* R/W */ +#define S3C2410_UDC_INTE_EP0 (1 << 0) /* R/W */ +#define S3C2410_UDC_USBINTE_RESET (1 << 2) /* R/W */ +#define S3C2410_UDC_USBINTE_SUSPEND (1 << 0) /* R/W */ #define S3C2410_UDC_INDEX_EP0 (0x00) -#define S3C2410_UDC_INDEX_EP1 (0x01) // ?? -#define S3C2410_UDC_INDEX_EP2 (0x02) // ?? -#define S3C2410_UDC_INDEX_EP3 (0x03) // ?? -#define S3C2410_UDC_INDEX_EP4 (0x04) // ?? - -#define S3C2410_UDC_ICSR1_CLRDT (1<<6) // R/W -#define S3C2410_UDC_ICSR1_SENTSTL (1<<5) // R/W (clear only) -#define S3C2410_UDC_ICSR1_SENDSTL (1<<4) // R/W -#define S3C2410_UDC_ICSR1_FFLUSH (1<<3) // W (set only) -#define S3C2410_UDC_ICSR1_UNDRUN (1<<2) // R/W (clear only) -#define S3C2410_UDC_ICSR1_PKTRDY (1<<0) // R/W (set only) - -#define S3C2410_UDC_ICSR2_AUTOSET (1<<7) // R/W -#define S3C2410_UDC_ICSR2_ISO (1<<6) // R/W -#define S3C2410_UDC_ICSR2_MODEIN (1<<5) // R/W -#define S3C2410_UDC_ICSR2_DMAIEN (1<<4) // R/W - -#define S3C2410_UDC_OCSR1_CLRDT (1<<7) // R/W -#define S3C2410_UDC_OCSR1_SENTSTL (1<<6) // R/W (clear only) -#define S3C2410_UDC_OCSR1_SENDSTL (1<<5) // R/W -#define S3C2410_UDC_OCSR1_FFLUSH (1<<4) // R/W -#define S3C2410_UDC_OCSR1_DERROR (1<<3) // R -#define S3C2410_UDC_OCSR1_OVRRUN (1<<2) // R/W (clear only) -#define S3C2410_UDC_OCSR1_PKTRDY (1<<0) // R/W (clear only) - -#define S3C2410_UDC_OCSR2_AUTOCLR (1<<7) // R/W -#define S3C2410_UDC_OCSR2_ISO (1<<6) // R/W -#define S3C2410_UDC_OCSR2_DMAIEN (1<<5) // R/W - -#define S3C2410_UDC_EP0_CSR_OPKRDY (1<<0) -#define S3C2410_UDC_EP0_CSR_IPKRDY (1<<1) -#define S3C2410_UDC_EP0_CSR_SENTSTL (1<<2) -#define S3C2410_UDC_EP0_CSR_DE (1<<3) -#define S3C2410_UDC_EP0_CSR_SE (1<<4) -#define S3C2410_UDC_EP0_CSR_SENDSTL (1<<5) -#define S3C2410_UDC_EP0_CSR_SOPKTRDY (1<<6) -#define S3C2410_UDC_EP0_CSR_SSE (1<<7) - -#define S3C2410_UDC_MAXP_8 (1<<0) -#define S3C2410_UDC_MAXP_16 (1<<1) -#define S3C2410_UDC_MAXP_32 (1<<2) -#define S3C2410_UDC_MAXP_64 (1<<3) - +#define S3C2410_UDC_INDEX_EP1 (0x01) +#define S3C2410_UDC_INDEX_EP2 (0x02) +#define S3C2410_UDC_INDEX_EP3 (0x03) +#define S3C2410_UDC_INDEX_EP4 (0x04) + +#define S3C2410_UDC_ICSR1_CLRDT (1 << 6) /* R/W */ +#define S3C2410_UDC_ICSR1_SENTSTL (1 << 5) /* R/W (clear only) */ +#define S3C2410_UDC_ICSR1_SENDSTL (1 << 4) /* R/W */ +#define S3C2410_UDC_ICSR1_FFLUSH (1 << 3) /* W (set only) */ +#define S3C2410_UDC_ICSR1_UNDRUN (1 << 2) /* R/W (clear only) */ +#define S3C2410_UDC_ICSR1_PKTRDY (1 << 0) /* R/W (set only) */ + +#define S3C2410_UDC_ICSR2_AUTOSET (1 << 7) /* R/W */ +#define S3C2410_UDC_ICSR2_ISO (1 << 6) /* R/W */ +#define S3C2410_UDC_ICSR2_MODEIN (1 << 5) /* R/W */ +#define S3C2410_UDC_ICSR2_DMAIEN (1 << 4) /* R/W */ + +#define S3C2410_UDC_OCSR1_CLRDT (1 << 7) /* R/W */ +#define S3C2410_UDC_OCSR1_SENTSTL (1 << 6) /* R/W (clear only) */ +#define S3C2410_UDC_OCSR1_SENDSTL (1 << 5) /* R/W */ +#define S3C2410_UDC_OCSR1_FFLUSH (1 << 4) /* R/W */ +#define S3C2410_UDC_OCSR1_DERROR (1 << 3) /* R */ +#define S3C2410_UDC_OCSR1_OVRRUN (1 << 2) /* R/W (clear only) */ +#define S3C2410_UDC_OCSR1_PKTRDY (1 << 0) /* R/W (clear only) */ + +#define S3C2410_UDC_OCSR2_AUTOCLR (1 << 7) /* R/W */ +#define S3C2410_UDC_OCSR2_ISO (1 << 6) /* R/W */ +#define S3C2410_UDC_OCSR2_DMAIEN (1 << 5) /* R/W */ + +#define S3C2410_UDC_EP0_CSR_OPKRDY (1 << 0) +#define S3C2410_UDC_EP0_CSR_IPKRDY (1 << 1) +#define S3C2410_UDC_EP0_CSR_SENTSTL (1 << 2) +#define S3C2410_UDC_EP0_CSR_DE (1 << 3) +#define S3C2410_UDC_EP0_CSR_SE (1 << 4) +#define S3C2410_UDC_EP0_CSR_SENDSTL (1 << 5) +#define S3C2410_UDC_EP0_CSR_SOPKTRDY (1 << 6) +#define S3C2410_UDC_EP0_CSR_SSE (1 << 7) + +#define S3C2410_UDC_MAXP_8 (1 << 0) +#define S3C2410_UDC_MAXP_16 (1 << 1) +#define S3C2410_UDC_MAXP_32 (1 << 2) +#define S3C2410_UDC_MAXP_64 (1 << 3) #endif diff --git a/arch/arm/plat-s5p/include/plat/reset.h b/arch/arm/plat-samsung/include/plat/reset.h index 335e97812ee..32ca5179c6e 100644 --- a/arch/arm/plat-s5p/include/plat/reset.h +++ b/arch/arm/plat-samsung/include/plat/reset.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s5p/include/plat/reset.h +/* linux/arch/arm/plat-samsung/include/plat/reset.h * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com/ @@ -8,9 +8,9 @@ * published by the Free Software Foundation. */ -#ifndef __ASM_PLAT_S5P_RESET_H -#define __ASM_PLAT_S5P_RESET_H __FILE__ +#ifndef __PLAT_SAMSUNG_RESET_H +#define __PLAT_SAMSUNG_RESET_H __FILE__ extern void (*s5p_reset_hook)(void); -#endif /* __ASM_PLAT_S5P_RESET_H */ +#endif /* __PLAT_SAMSUNG_RESET_H */ diff --git a/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h b/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h deleted file mode 100644 index bf5e2a9d408..00000000000 --- a/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h +++ /dev/null @@ -1,32 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef __S3C_PL330_PDATA_H -#define __S3C_PL330_PDATA_H - -#include <plat/s3c-dma-pl330.h> - -/* - * Every PL330 DMAC has max 32 peripheral interfaces, - * of which some may be not be really used in your - * DMAC's configuration. - * Populate this array of 32 peri i/fs with relevant - * channel IDs for used peri i/f and DMACH_MAX for - * those unused. - * - * The platforms just need to provide this info - * to the S3C DMA API driver for PL330. - */ -struct s3c_pl330_platdata { - enum dma_ch peri[32]; -}; - -#endif /* __S3C_PL330_PDATA_H */ diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h b/arch/arm/plat-samsung/include/plat/s3c2410.h index 82ab4aad1bb..3986497dd3f 100644 --- a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h +++ b/arch/arm/plat-samsung/include/plat/s3c2410.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/plat-s3c24xx/s3c2410.h +/* linux/arch/arm/plat-samsung/include/plat/s3c2410.h * * Copyright (c) 2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2412.h b/arch/arm/plat-samsung/include/plat/s3c2412.h index bb15d3b68be..5bcfd143ba1 100644 --- a/arch/arm/plat-s3c24xx/include/plat/s3c2412.h +++ b/arch/arm/plat-samsung/include/plat/s3c2412.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/plat-s3c24xx/s3c2412.h +/* linux/arch/arm/plat-samsung/include/plat/s3c2412.h * * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2416.h b/arch/arm/plat-samsung/include/plat/s3c2416.h index dc3c0907d22..a764f8503f5 100644 --- a/arch/arm/plat-s3c24xx/include/plat/s3c2416.h +++ b/arch/arm/plat-samsung/include/plat/s3c2416.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h +/* linux/arch/arm/plat-samsung/include/plat/s3c2416.h * * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com> * diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h b/arch/arm/plat-samsung/include/plat/s3c2443.h index a19715feb79..4b2ac9a272b 100644 --- a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h +++ b/arch/arm/plat-samsung/include/plat/s3c2443.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h +/* linux/arch/arm/plat-samsung/include/plat/s3c2443.h * * Copyright (c) 2004-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c244x.h b/arch/arm/plat-samsung/include/plat/s3c244x.h index 89e8d0a25f8..ea0c961b760 100644 --- a/arch/arm/plat-s3c24xx/include/plat/s3c244x.h +++ b/arch/arm/plat-samsung/include/plat/s3c244x.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s3c24xx/include/plat/s3c244x.h +/* linux/arch/arm/plat-samsung/include/plat/s3c244x.h * * Copyright (c) 2004-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> diff --git a/arch/arm/mach-s3c64xx/include/mach/s3c6400.h b/arch/arm/plat-samsung/include/plat/s3c6400.h index f86958d0535..37d428aaaeb 100644 --- a/arch/arm/mach-s3c64xx/include/mach/s3c6400.h +++ b/arch/arm/plat-samsung/include/plat/s3c6400.h @@ -1,4 +1,4 @@ -/* arch/arm/mach-s3c64xx/include/macht/s3c6400.h +/* linux/arch/arm/plat-samsung/include/plat/s3c6400.h * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics diff --git a/arch/arm/mach-s3c64xx/include/mach/s3c6410.h b/arch/arm/plat-samsung/include/plat/s3c6410.h index 24f1141ffcb..20a6675b9d1 100644 --- a/arch/arm/mach-s3c64xx/include/mach/s3c6410.h +++ b/arch/arm/plat-samsung/include/plat/s3c6410.h @@ -1,4 +1,4 @@ -/* arch/arm/mach-s3c64xx/include/mach/s3c6410.h +/* linux/arch/arm/plat-samsung/include/plat/s3c6410.h * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics diff --git a/arch/arm/plat-s5p/include/plat/s5p-clock.h b/arch/arm/plat-samsung/include/plat/s5p-clock.h index 769b5bdfb04..984bf9e7bc8 100644 --- a/arch/arm/plat-s5p/include/plat/s5p-clock.h +++ b/arch/arm/plat-samsung/include/plat/s5p-clock.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s5p/include/plat/s5p-clock.h +/* linux/arch/arm/plat-samsung/include/plat/s5p-clock.h * * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. * http://www.samsung.com diff --git a/arch/arm/plat-s5p/include/plat/s5p-time.h b/arch/arm/plat-samsung/include/plat/s5p-time.h index 575e88109db..3a70aebc920 100644 --- a/arch/arm/plat-s5p/include/plat/s5p-time.h +++ b/arch/arm/plat-samsung/include/plat/s5p-time.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s5p/include/plat/s5p-time.h +/* linux/arch/arm/plat-samsung/include/plat/s5p-time.h * * Copyright 2011 Samsung Electronics Co., Ltd. * http://www.samsung.com/ diff --git a/arch/arm/plat-s5p/include/plat/s5p6440.h b/arch/arm/plat-samsung/include/plat/s5p6440.h index 528585d2caf..bf85ebbb4fb 100644 --- a/arch/arm/plat-s5p/include/plat/s5p6440.h +++ b/arch/arm/plat-samsung/include/plat/s5p6440.h @@ -1,4 +1,4 @@ -/* arch/arm/plat-s5p/include/plat/s5p6440.h +/* linux/arch/arm/plat-samsung/include/plat/s5p6440.h * * Copyright (c) 2009 Samsung Electronics Co., Ltd. * http://www.samsung.com/ diff --git a/arch/arm/plat-s5p/include/plat/s5p6450.h b/arch/arm/plat-samsung/include/plat/s5p6450.h index 640a41c26be..da25f9a1c54 100644 --- a/arch/arm/plat-s5p/include/plat/s5p6450.h +++ b/arch/arm/plat-samsung/include/plat/s5p6450.h @@ -1,4 +1,4 @@ -/* arch/arm/plat-s5p/include/plat/s5p6450.h +/* linux/arch/arm/plat-samsung/include/plat/s5p6450.h * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com diff --git a/arch/arm/plat-s5p/include/plat/s5pc100.h b/arch/arm/plat-samsung/include/plat/s5pc100.h index 5f6099dd7ca..9a21aeaaf45 100644 --- a/arch/arm/plat-s5p/include/plat/s5pc100.h +++ b/arch/arm/plat-samsung/include/plat/s5pc100.h @@ -1,4 +1,4 @@ -/* arch/arm/plat-s5p/include/plat/s5pc100.h +/* linux/arch/arm/plat-samsung/include/plat/s5pc100.h * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com/ diff --git a/arch/arm/plat-s5p/include/plat/s5pv210.h b/arch/arm/plat-samsung/include/plat/s5pv210.h index 6c93a0c7810..b4bc6be7707 100644 --- a/arch/arm/plat-s5p/include/plat/s5pv210.h +++ b/arch/arm/plat-samsung/include/plat/s5pv210.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s5p/include/plat/s5pv210.h +/* linux/arch/arm/plat-samsung/include/plat/s5pv210.h * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com/ diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index 058e09654fe..e7b3c752e91 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -55,10 +55,6 @@ enum clk_types { * cd_type == S3C_SDHCI_CD_GPIO * @ext_cd_gpio_invert: invert values for external CD gpio line * @cfg_gpio: Configure the GPIO for a specific card bit-width - * @cfg_card: Configure the interface for a specific card and speed. This - * is necessary the controllers and/or GPIO blocks require the - * changing of driver-strength and other controls dependent on - * the card and speed of operation. * * Initialisation data specific to either the machine or the platform * for the device driver to use or call-back when configuring gpio or @@ -80,12 +76,15 @@ struct s3c_sdhci_platdata { int state)); void (*cfg_gpio)(struct platform_device *dev, int width); - void (*cfg_card)(struct platform_device *dev, - void __iomem *regbase, - struct mmc_ios *ios, - struct mmc_card *card); }; +/* s3c_sdhci_set_platdata() - common helper for setting SDHCI platform data + * @pd: The default platform data for this device. + * @set: Pointer to the platform data to fill in. + */ +extern void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd, + struct s3c_sdhci_platdata *set); + /** * s3c_sdhci0_set_platdata - Set platform data for S3C SDHCI device. * @pd: Platform data to register to device. @@ -132,17 +131,11 @@ extern void exynos4_setup_sdhci3_cfg_gpio(struct platform_device *, int w); #ifdef CONFIG_S3C2416_SETUP_SDHCI extern char *s3c2416_hsmmc_clksrcs[4]; -extern void s3c2416_setup_sdhci_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card); - static inline void s3c2416_default_sdhci0(void) { #ifdef CONFIG_S3C_DEV_HSMMC s3c_hsmmc0_def_platdata.clocks = s3c2416_hsmmc_clksrcs; s3c_hsmmc0_def_platdata.cfg_gpio = s3c2416_setup_sdhci0_cfg_gpio; - s3c_hsmmc0_def_platdata.cfg_card = s3c2416_setup_sdhci_cfg_card; #endif /* CONFIG_S3C_DEV_HSMMC */ } @@ -151,7 +144,6 @@ static inline void s3c2416_default_sdhci1(void) #ifdef CONFIG_S3C_DEV_HSMMC1 s3c_hsmmc1_def_platdata.clocks = s3c2416_hsmmc_clksrcs; s3c_hsmmc1_def_platdata.cfg_gpio = s3c2416_setup_sdhci1_cfg_gpio; - s3c_hsmmc1_def_platdata.cfg_card = s3c2416_setup_sdhci_cfg_card; #endif /* CONFIG_S3C_DEV_HSMMC1 */ } @@ -165,17 +157,11 @@ static inline void s3c2416_default_sdhci1(void) { } #ifdef CONFIG_S3C64XX_SETUP_SDHCI extern char *s3c64xx_hsmmc_clksrcs[4]; -extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card); - static inline void s3c6400_default_sdhci0(void) { #ifdef CONFIG_S3C_DEV_HSMMC s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio; - s3c_hsmmc0_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card; #endif } @@ -184,7 +170,6 @@ static inline void s3c6400_default_sdhci1(void) #ifdef CONFIG_S3C_DEV_HSMMC1 s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio; - s3c_hsmmc1_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card; #endif } @@ -193,21 +178,14 @@ static inline void s3c6400_default_sdhci2(void) #ifdef CONFIG_S3C_DEV_HSMMC2 s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio; - s3c_hsmmc2_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card; #endif } -extern void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card); - static inline void s3c6410_default_sdhci0(void) { #ifdef CONFIG_S3C_DEV_HSMMC s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio; - s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card; #endif } @@ -216,7 +194,6 @@ static inline void s3c6410_default_sdhci1(void) #ifdef CONFIG_S3C_DEV_HSMMC1 s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio; - s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card; #endif } @@ -225,7 +202,6 @@ static inline void s3c6410_default_sdhci2(void) #ifdef CONFIG_S3C_DEV_HSMMC2 s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio; - s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card; #endif } @@ -244,17 +220,11 @@ static inline void s3c6400_default_sdhci2(void) { } #ifdef CONFIG_S5PC100_SETUP_SDHCI extern char *s5pc100_hsmmc_clksrcs[4]; -extern void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card); - static inline void s5pc100_default_sdhci0(void) { #ifdef CONFIG_S3C_DEV_HSMMC s3c_hsmmc0_def_platdata.clocks = s5pc100_hsmmc_clksrcs; s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio; - s3c_hsmmc0_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card; #endif } @@ -263,7 +233,6 @@ static inline void s5pc100_default_sdhci1(void) #ifdef CONFIG_S3C_DEV_HSMMC1 s3c_hsmmc1_def_platdata.clocks = s5pc100_hsmmc_clksrcs; s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio; - s3c_hsmmc1_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card; #endif } @@ -272,7 +241,6 @@ static inline void s5pc100_default_sdhci2(void) #ifdef CONFIG_S3C_DEV_HSMMC2 s3c_hsmmc2_def_platdata.clocks = s5pc100_hsmmc_clksrcs; s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio; - s3c_hsmmc2_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card; #endif } @@ -288,17 +256,11 @@ static inline void s5pc100_default_sdhci2(void) { } #ifdef CONFIG_S5PV210_SETUP_SDHCI extern char *s5pv210_hsmmc_clksrcs[4]; -extern void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card); - static inline void s5pv210_default_sdhci0(void) { #ifdef CONFIG_S3C_DEV_HSMMC s3c_hsmmc0_def_platdata.clocks = s5pv210_hsmmc_clksrcs; s3c_hsmmc0_def_platdata.cfg_gpio = s5pv210_setup_sdhci0_cfg_gpio; - s3c_hsmmc0_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card; #endif } @@ -307,7 +269,6 @@ static inline void s5pv210_default_sdhci1(void) #ifdef CONFIG_S3C_DEV_HSMMC1 s3c_hsmmc1_def_platdata.clocks = s5pv210_hsmmc_clksrcs; s3c_hsmmc1_def_platdata.cfg_gpio = s5pv210_setup_sdhci1_cfg_gpio; - s3c_hsmmc1_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card; #endif } @@ -316,7 +277,6 @@ static inline void s5pv210_default_sdhci2(void) #ifdef CONFIG_S3C_DEV_HSMMC2 s3c_hsmmc2_def_platdata.clocks = s5pv210_hsmmc_clksrcs; s3c_hsmmc2_def_platdata.cfg_gpio = s5pv210_setup_sdhci2_cfg_gpio; - s3c_hsmmc2_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card; #endif } @@ -325,7 +285,6 @@ static inline void s5pv210_default_sdhci3(void) #ifdef CONFIG_S3C_DEV_HSMMC3 s3c_hsmmc3_def_platdata.clocks = s5pv210_hsmmc_clksrcs; s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio; - s3c_hsmmc3_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card; #endif } @@ -341,17 +300,11 @@ static inline void s5pv210_default_sdhci3(void) { } #ifdef CONFIG_EXYNOS4_SETUP_SDHCI extern char *exynos4_hsmmc_clksrcs[4]; -extern void exynos4_setup_sdhci_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card); - static inline void exynos4_default_sdhci0(void) { #ifdef CONFIG_S3C_DEV_HSMMC s3c_hsmmc0_def_platdata.clocks = exynos4_hsmmc_clksrcs; s3c_hsmmc0_def_platdata.cfg_gpio = exynos4_setup_sdhci0_cfg_gpio; - s3c_hsmmc0_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card; #endif } @@ -360,7 +313,6 @@ static inline void exynos4_default_sdhci1(void) #ifdef CONFIG_S3C_DEV_HSMMC1 s3c_hsmmc1_def_platdata.clocks = exynos4_hsmmc_clksrcs; s3c_hsmmc1_def_platdata.cfg_gpio = exynos4_setup_sdhci1_cfg_gpio; - s3c_hsmmc1_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card; #endif } @@ -369,7 +321,6 @@ static inline void exynos4_default_sdhci2(void) #ifdef CONFIG_S3C_DEV_HSMMC2 s3c_hsmmc2_def_platdata.clocks = exynos4_hsmmc_clksrcs; s3c_hsmmc2_def_platdata.cfg_gpio = exynos4_setup_sdhci2_cfg_gpio; - s3c_hsmmc2_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card; #endif } @@ -378,7 +329,6 @@ static inline void exynos4_default_sdhci3(void) #ifdef CONFIG_S3C_DEV_HSMMC3 s3c_hsmmc3_def_platdata.clocks = exynos4_hsmmc_clksrcs; s3c_hsmmc3_def_platdata.cfg_gpio = exynos4_setup_sdhci3_cfg_gpio; - s3c_hsmmc3_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card; #endif } diff --git a/arch/arm/plat-s5p/include/plat/sysmmu.h b/arch/arm/plat-samsung/include/plat/sysmmu.h index bf5283c2a19..5fe8ee01a5b 100644 --- a/arch/arm/plat-s5p/include/plat/sysmmu.h +++ b/arch/arm/plat-samsung/include/plat/sysmmu.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s5p/include/plat/sysmmu.h +/* linux/arch/arm/plat-samsung/include/plat/sysmmu.h * * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com @@ -10,8 +10,8 @@ * published by the Free Software Foundation. */ -#ifndef __ASM__PLAT_SYSMMU_H -#define __ASM__PLAT_SYSMMU_H __FILE__ +#ifndef __PLAT_SAMSUNG_SYSMMU_H +#define __PLAT_SAMSUNG_SYSMMU_H __FILE__ enum S5P_SYSMMU_INTERRUPT_TYPE { SYSMMU_PAGEFAULT, diff --git a/arch/arm/plat-s5p/include/plat/system-reset.h b/arch/arm/plat-samsung/include/plat/system-reset.h index f307f34e642..a448e990964 100644 --- a/arch/arm/plat-s5p/include/plat/system-reset.h +++ b/arch/arm/plat-samsung/include/plat/system-reset.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s5p/include/plat/system-reset.h +/* linux/arch/arm/plat-samsung/include/plat/system-reset.h * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com diff --git a/arch/arm/plat-samsung/include/plat/tv-core.h b/arch/arm/plat-samsung/include/plat/tv-core.h new file mode 100644 index 00000000000..3bc34f3ce28 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/tv-core.h @@ -0,0 +1,44 @@ +/* + * arch/arm/plat-samsung/include/plat/tv.h + * + * Copyright 2011 Samsung Electronics Co., Ltd. + * Tomasz Stanislawski <t.stanislaws@samsung.com> + * + * Samsung TV driver core functions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __SAMSUNG_PLAT_TV_H +#define __SAMSUNG_PLAT_TV_H __FILE__ + +/* + * These functions are only for use with the core support code, such as + * the CPU-specific initialization code. + */ + +/* Re-define device name to differentiate the subsystem in various SoCs. */ +static inline void s5p_hdmi_setname(char *name) +{ +#ifdef CONFIG_S5P_DEV_TV + s5p_device_hdmi.name = name; +#endif +} + +static inline void s5p_mixer_setname(char *name) +{ +#ifdef CONFIG_S5P_DEV_TV + s5p_device_mixer.name = name; +#endif +} + +static inline void s5p_sdo_setname(char *name) +{ +#ifdef CONFIG_S5P_DEV_TV + s5p_device_sdo.name = name; +#endif +} + +#endif /* __SAMSUNG_PLAT_TV_H */ diff --git a/arch/arm/plat-s3c24xx/include/plat/udc.h b/arch/arm/plat-samsung/include/plat/udc.h index f6388424250..8c22d586bef 100644 --- a/arch/arm/plat-s3c24xx/include/plat/udc.h +++ b/arch/arm/plat-samsung/include/plat/udc.h @@ -1,4 +1,4 @@ -/* arch/arm/mach-s3c2410/include/mach/udc.h +/* arch/arm/plat-samsung/include/plat/udc.h * * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org> * @@ -26,7 +26,7 @@ enum s3c2410_udc_cmd_e { struct s3c2410_udc_mach_info { void (*udc_command)(enum s3c2410_udc_cmd_e); - void (*vbus_draw)(unsigned int ma); + void (*vbus_draw)(unsigned int ma); unsigned int pullup_pin; unsigned int pullup_pin_inverted; diff --git a/arch/arm/plat-s5p/include/plat/usb-phy.h b/arch/arm/plat-samsung/include/plat/usb-phy.h index 6dd6bcfca3c..959bcdb03a2 100644 --- a/arch/arm/plat-s5p/include/plat/usb-phy.h +++ b/arch/arm/plat-samsung/include/plat/usb-phy.h @@ -8,8 +8,8 @@ * option) any later version. */ -#ifndef __PLAT_S5P_USB_PHY_H -#define __PLAT_S5P_USB_PHY_H +#ifndef __PLAT_SAMSUNG_USB_PHY_H +#define __PLAT_SAMSUNG_USB_PHY_H __FILE__ enum s5p_usb_phy_type { S5P_USB_PHY_DEVICE, @@ -19,4 +19,4 @@ enum s5p_usb_phy_type { extern int s5p_usb_phy_init(struct platform_device *pdev, int type); extern int s5p_usb_phy_exit(struct platform_device *pdev, int type); -#endif /* __PLAT_S5P_REGS_USB_PHY_H */ +#endif /* __PLAT_SAMSUNG_USB_PHY_H */ diff --git a/arch/arm/plat-samsung/include/plat/watchdog-reset.h b/arch/arm/plat-samsung/include/plat/watchdog-reset.h index 54b762acb5a..40dbb2b0ae2 100644 --- a/arch/arm/plat-samsung/include/plat/watchdog-reset.h +++ b/arch/arm/plat-samsung/include/plat/watchdog-reset.h @@ -10,6 +10,7 @@ * published by the Free Software Foundation. */ +#include <plat/clock.h> #include <plat/regs-watchdog.h> #include <mach/map.h> @@ -19,17 +20,12 @@ static inline void arch_wdt_reset(void) { - struct clk *wdtclk; - printk("arch_reset: attempting watchdog reset\n"); __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */ - wdtclk = clk_get(NULL, "watchdog"); - if (!IS_ERR(wdtclk)) { - clk_enable(wdtclk); - } else - printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__); + if (s3c2410_wdtclk) + clk_enable(s3c2410_wdtclk); /* put initial values into count and data */ __raw_writel(0x80, S3C2410_WTCNT); diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c index f714d060370..51583cd3016 100644 --- a/arch/arm/plat-samsung/irq-vic-timer.c +++ b/arch/arm/plat-samsung/irq-vic-timer.c @@ -22,9 +22,14 @@ #include <plat/irq-vic-timer.h> #include <plat/regs-timer.h> +#include <asm/mach/irq.h> + static void s3c_irq_demux_vic_timer(unsigned int irq, struct irq_desc *desc) { + struct irq_chip *chip = irq_get_chip(irq); + chained_irq_enter(chip, desc); generic_handle_irq((int)desc->irq_data.handler_data); + chained_irq_exit(chip, desc); } /* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */ diff --git a/arch/arm/plat-samsung/platformdata.c b/arch/arm/plat-samsung/platformdata.c index 7cf2e1e3b20..4c9a20734fe 100644 --- a/arch/arm/plat-samsung/platformdata.c +++ b/arch/arm/plat-samsung/platformdata.c @@ -14,6 +14,7 @@ #include <linux/platform_device.h> #include <plat/devs.h> +#include <plat/sdhci.h> void __init *s3c_set_platdata(void *pd, size_t pdsize, struct platform_device *pdev) @@ -35,3 +36,22 @@ void __init *s3c_set_platdata(void *pd, size_t pdsize, pdev->dev.platform_data = npd; return npd; } + +void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd, + struct s3c_sdhci_platdata *set) +{ + set->cd_type = pd->cd_type; + set->ext_cd_init = pd->ext_cd_init; + set->ext_cd_cleanup = pd->ext_cd_cleanup; + set->ext_cd_gpio = pd->ext_cd_gpio; + set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert; + + if (pd->max_width) + set->max_width = pd->max_width; + if (pd->cfg_gpio) + set->cfg_gpio = pd->cfg_gpio; + if (pd->host_caps) + set->host_caps |= pd->host_caps; + if (pd->clk_type) + set->clk_type = pd->clk_type; +} diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c index 96528200eb7..4be016eaa6d 100644 --- a/arch/arm/plat-samsung/pm-gpio.c +++ b/arch/arm/plat-samsung/pm-gpio.c @@ -28,13 +28,13 @@ #define OFFS_DAT (0x04) #define OFFS_UP (0x08) -static void s3c_gpio_pm_1bit_save(struct s3c_gpio_chip *chip) +static void samsung_gpio_pm_1bit_save(struct samsung_gpio_chip *chip) { chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON); chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT); } -static void s3c_gpio_pm_1bit_resume(struct s3c_gpio_chip *chip) +static void samsung_gpio_pm_1bit_resume(struct samsung_gpio_chip *chip) { void __iomem *base = chip->base; u32 old_gpcon = __raw_readl(base + OFFS_CON); @@ -60,12 +60,12 @@ static void s3c_gpio_pm_1bit_resume(struct s3c_gpio_chip *chip) chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat); } -struct s3c_gpio_pm s3c_gpio_pm_1bit = { - .save = s3c_gpio_pm_1bit_save, - .resume = s3c_gpio_pm_1bit_resume, +struct samsung_gpio_pm samsung_gpio_pm_1bit = { + .save = samsung_gpio_pm_1bit_save, + .resume = samsung_gpio_pm_1bit_resume, }; -static void s3c_gpio_pm_2bit_save(struct s3c_gpio_chip *chip) +static void samsung_gpio_pm_2bit_save(struct samsung_gpio_chip *chip) { chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON); chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT); @@ -95,7 +95,7 @@ static inline int is_out(unsigned long con) } /** - * s3c_gpio_pm_2bit_resume() - restore the given GPIO bank + * samsung_gpio_pm_2bit_resume() - restore the given GPIO bank * @chip: The chip information to resume. * * Restore one of the GPIO banks that was saved during suspend. This is @@ -121,7 +121,7 @@ static inline int is_out(unsigned long con) * [1] this assumes that writing to a pin DAT whilst in SFN will set the * state for when it is next output. */ -static void s3c_gpio_pm_2bit_resume(struct s3c_gpio_chip *chip) +static void samsung_gpio_pm_2bit_resume(struct samsung_gpio_chip *chip) { void __iomem *base = chip->base; u32 old_gpcon = __raw_readl(base + OFFS_CON); @@ -187,13 +187,13 @@ static void s3c_gpio_pm_2bit_resume(struct s3c_gpio_chip *chip) chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat); } -struct s3c_gpio_pm s3c_gpio_pm_2bit = { - .save = s3c_gpio_pm_2bit_save, - .resume = s3c_gpio_pm_2bit_resume, +struct samsung_gpio_pm samsung_gpio_pm_2bit = { + .save = samsung_gpio_pm_2bit_save, + .resume = samsung_gpio_pm_2bit_resume, }; #if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P) -static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip) +static void samsung_gpio_pm_4bit_save(struct samsung_gpio_chip *chip) { chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON); chip->pm_save[2] = __raw_readl(chip->base + OFFS_DAT); @@ -203,7 +203,7 @@ static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip) chip->pm_save[0] = __raw_readl(chip->base - 4); } -static u32 s3c_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon) +static u32 samsung_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon) { u32 old, new, mask; u32 change_mask = 0x0; @@ -242,14 +242,14 @@ static u32 s3c_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon) return change_mask; } -static void s3c_gpio_pm_4bit_con(struct s3c_gpio_chip *chip, int index) +static void samsung_gpio_pm_4bit_con(struct samsung_gpio_chip *chip, int index) { void __iomem *con = chip->base + (index * 4); u32 old_gpcon = __raw_readl(con); u32 gps_gpcon = chip->pm_save[index + 1]; u32 gpcon, mask; - mask = s3c_gpio_pm_4bit_mask(old_gpcon, gps_gpcon); + mask = samsung_gpio_pm_4bit_mask(old_gpcon, gps_gpcon); gpcon = old_gpcon & ~mask; gpcon |= gps_gpcon & mask; @@ -257,7 +257,7 @@ static void s3c_gpio_pm_4bit_con(struct s3c_gpio_chip *chip, int index) __raw_writel(gpcon, con); } -static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip) +static void samsung_gpio_pm_4bit_resume(struct samsung_gpio_chip *chip) { void __iomem *base = chip->base; u32 old_gpcon[2]; @@ -269,10 +269,10 @@ static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip) old_gpcon[0] = 0; old_gpcon[1] = __raw_readl(base + OFFS_CON); - s3c_gpio_pm_4bit_con(chip, 0); + samsung_gpio_pm_4bit_con(chip, 0); if (chip->chip.ngpio > 8) { old_gpcon[0] = __raw_readl(base - 4); - s3c_gpio_pm_4bit_con(chip, -1); + samsung_gpio_pm_4bit_con(chip, -1); } /* Now change the configurations that require DAT,CON */ @@ -298,19 +298,19 @@ static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip) old_gpdat, gps_gpdat); } -struct s3c_gpio_pm s3c_gpio_pm_4bit = { - .save = s3c_gpio_pm_4bit_save, - .resume = s3c_gpio_pm_4bit_resume, +struct samsung_gpio_pm samsung_gpio_pm_4bit = { + .save = samsung_gpio_pm_4bit_save, + .resume = samsung_gpio_pm_4bit_resume, }; #endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P */ /** - * s3c_pm_save_gpio() - save gpio chip data for suspend + * samsung_pm_save_gpio() - save gpio chip data for suspend * @ourchip: The chip for suspend. */ -static void s3c_pm_save_gpio(struct s3c_gpio_chip *ourchip) +static void samsung_pm_save_gpio(struct samsung_gpio_chip *ourchip) { - struct s3c_gpio_pm *pm = ourchip->pm; + struct samsung_gpio_pm *pm = ourchip->pm; if (pm == NULL || pm->save == NULL) S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label); @@ -319,24 +319,24 @@ static void s3c_pm_save_gpio(struct s3c_gpio_chip *ourchip) } /** - * s3c_pm_save_gpios() - Save the state of the GPIO banks. + * samsung_pm_save_gpios() - Save the state of the GPIO banks. * * For all the GPIO banks, save the state of each one ready for going * into a suspend mode. */ -void s3c_pm_save_gpios(void) +void samsung_pm_save_gpios(void) { - struct s3c_gpio_chip *ourchip; + struct samsung_gpio_chip *ourchip; unsigned int gpio_nr; for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) { - ourchip = s3c_gpiolib_getchip(gpio_nr); + ourchip = samsung_gpiolib_getchip(gpio_nr); if (!ourchip) { gpio_nr++; continue; } - s3c_pm_save_gpio(ourchip); + samsung_pm_save_gpio(ourchip); S3C_PMDBG("%s: save %08x,%08x,%08x,%08x\n", ourchip->chip.label, @@ -351,12 +351,12 @@ void s3c_pm_save_gpios(void) } /** - * s3c_pm_resume_gpio() - restore gpio chip data after suspend + * samsung_pm_resume_gpio() - restore gpio chip data after suspend * @ourchip: The suspended chip. */ -static void s3c_pm_resume_gpio(struct s3c_gpio_chip *ourchip) +static void samsung_pm_resume_gpio(struct samsung_gpio_chip *ourchip) { - struct s3c_gpio_pm *pm = ourchip->pm; + struct samsung_gpio_pm *pm = ourchip->pm; if (pm == NULL || pm->resume == NULL) S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label); @@ -364,19 +364,19 @@ static void s3c_pm_resume_gpio(struct s3c_gpio_chip *ourchip) pm->resume(ourchip); } -void s3c_pm_restore_gpios(void) +void samsung_pm_restore_gpios(void) { - struct s3c_gpio_chip *ourchip; + struct samsung_gpio_chip *ourchip; unsigned int gpio_nr; for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) { - ourchip = s3c_gpiolib_getchip(gpio_nr); + ourchip = samsung_gpiolib_getchip(gpio_nr); if (!ourchip) { gpio_nr++; continue; } - s3c_pm_resume_gpio(ourchip); + samsung_pm_resume_gpio(ourchip); gpio_nr += ourchip->chip.ngpio; gpio_nr += CONFIG_S3C_GPIO_SPACE; diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index ae6f99834cd..64ab65f0fdb 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -268,8 +268,8 @@ static int s3c_pm_enter(suspend_state_t state) /* save all necessary core registers not covered by the drivers */ - s3c_pm_save_gpios(); - s3c_pm_saved_gpios(); + samsung_pm_save_gpios(); + samsung_pm_saved_gpios(); s3c_pm_save_uarts(); s3c_pm_save_core(); @@ -306,7 +306,7 @@ static int s3c_pm_enter(suspend_state_t state) s3c_pm_restore_core(); s3c_pm_restore_uarts(); - s3c_pm_restore_gpios(); + samsung_pm_restore_gpios(); s3c_pm_restored_gpios(); s3c_pm_debug_init(); diff --git a/arch/arm/plat-samsung/pwm-clock.c b/arch/arm/plat-samsung/pwm-clock.c index f1bba88ed2f..a35ff3bcffe 100644 --- a/arch/arm/plat-samsung/pwm-clock.c +++ b/arch/arm/plat-samsung/pwm-clock.c @@ -27,7 +27,7 @@ #include <plat/cpu.h> #include <plat/regs-timer.h> -#include <mach/pwm-clock.h> +#include <plat/pwm-clock.h> /* Each of the timers 0 through 5 go through the following * clock tree, with the inputs depending on the timers. @@ -339,8 +339,17 @@ static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent) unsigned long bits; unsigned long shift = S3C2410_TCFG1_SHIFT(id); + unsigned long mux_tclk; + + if (soc_is_s3c24xx()) + mux_tclk = S3C2410_TCFG1_MUX_TCLK; + else if (soc_is_s5p6440() || soc_is_s5p6450()) + mux_tclk = 0; + else + mux_tclk = S3C64XX_TCFG1_MUX_TCLK; + if (parent == s3c24xx_pwmclk_tclk(id)) - bits = S3C_TCFG1_MUX_TCLK << shift; + bits = mux_tclk << shift; else if (parent == s3c24xx_pwmclk_tdiv(id)) bits = clk_pwm_tdiv_bits(to_tdiv(parent)) << shift; else diff --git a/arch/arm/plat-samsung/s3c-dma-ops.c b/arch/arm/plat-samsung/s3c-dma-ops.c new file mode 100644 index 00000000000..582333c7058 --- /dev/null +++ b/arch/arm/plat-samsung/s3c-dma-ops.c @@ -0,0 +1,130 @@ +/* linux/arch/arm/plat-samsung/s3c-dma-ops.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung S3C-DMA Operations + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/types.h> + +#include <mach/dma.h> + +struct cb_data { + void (*fp) (void *); + void *fp_param; + unsigned ch; + struct list_head node; +}; + +static LIST_HEAD(dma_list); + +static void s3c_dma_cb(struct s3c2410_dma_chan *channel, void *param, + int size, enum s3c2410_dma_buffresult res) +{ + struct cb_data *data = param; + + data->fp(data->fp_param); +} + +static unsigned s3c_dma_request(enum dma_ch dma_ch, + struct samsung_dma_info *info) +{ + struct cb_data *data; + + if (s3c2410_dma_request(dma_ch, info->client, NULL) < 0) { + s3c2410_dma_free(dma_ch, info->client); + return 0; + } + + data = kzalloc(sizeof(struct cb_data), GFP_KERNEL); + data->ch = dma_ch; + list_add_tail(&data->node, &dma_list); + + s3c2410_dma_devconfig(dma_ch, info->direction, info->fifo); + + if (info->cap == DMA_CYCLIC) + s3c2410_dma_setflags(dma_ch, S3C2410_DMAF_CIRCULAR); + + s3c2410_dma_config(dma_ch, info->width); + + return (unsigned)dma_ch; +} + +static int s3c_dma_release(unsigned ch, struct s3c2410_dma_client *client) +{ + struct cb_data *data; + + list_for_each_entry(data, &dma_list, node) + if (data->ch == ch) + break; + list_del(&data->node); + + s3c2410_dma_free(ch, client); + kfree(data); + + return 0; +} + +static int s3c_dma_prepare(unsigned ch, struct samsung_dma_prep_info *info) +{ + struct cb_data *data; + int len = (info->cap == DMA_CYCLIC) ? info->period : info->len; + + list_for_each_entry(data, &dma_list, node) + if (data->ch == ch) + break; + + if (!data->fp) { + s3c2410_dma_set_buffdone_fn(ch, s3c_dma_cb); + data->fp = info->fp; + data->fp_param = info->fp_param; + } + + s3c2410_dma_enqueue(ch, (void *)data, info->buf, len); + + return 0; +} + +static inline int s3c_dma_trigger(unsigned ch) +{ + return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_START); +} + +static inline int s3c_dma_started(unsigned ch) +{ + return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_STARTED); +} + +static inline int s3c_dma_flush(unsigned ch) +{ + return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_FLUSH); +} + +static inline int s3c_dma_stop(unsigned ch) +{ + return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_STOP); +} + +static struct samsung_dma_ops s3c_dma_ops = { + .request = s3c_dma_request, + .release = s3c_dma_release, + .prepare = s3c_dma_prepare, + .trigger = s3c_dma_trigger, + .started = s3c_dma_started, + .flush = s3c_dma_flush, + .stop = s3c_dma_stop, +}; + +void *s3c_dma_get_ops(void) +{ + return &s3c_dma_ops; +} +EXPORT_SYMBOL(s3c_dma_get_ops); diff --git a/arch/arm/plat-samsung/s3c-pl330.c b/arch/arm/plat-samsung/s3c-pl330.c deleted file mode 100644 index f85638c6f5a..00000000000 --- a/arch/arm/plat-samsung/s3c-pl330.c +++ /dev/null @@ -1,1244 +0,0 @@ -/* linux/arch/arm/plat-samsung/s3c-pl330.c - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/platform_device.h> -#include <linux/clk.h> -#include <linux/err.h> - -#include <asm/hardware/pl330.h> - -#include <plat/s3c-pl330-pdata.h> - -/** - * struct s3c_pl330_dmac - Logical representation of a PL330 DMAC. - * @busy_chan: Number of channels currently busy. - * @peri: List of IDs of peripherals this DMAC can work with. - * @node: To attach to the global list of DMACs. - * @pi: PL330 configuration info for the DMAC. - * @kmcache: Pool to quickly allocate xfers for all channels in the dmac. - * @clk: Pointer of DMAC operation clock. - */ -struct s3c_pl330_dmac { - unsigned busy_chan; - enum dma_ch *peri; - struct list_head node; - struct pl330_info *pi; - struct kmem_cache *kmcache; - struct clk *clk; -}; - -/** - * struct s3c_pl330_xfer - A request submitted by S3C DMA clients. - * @token: Xfer ID provided by the client. - * @node: To attach to the list of xfers on a channel. - * @px: Xfer for PL330 core. - * @chan: Owner channel of this xfer. - */ -struct s3c_pl330_xfer { - void *token; - struct list_head node; - struct pl330_xfer px; - struct s3c_pl330_chan *chan; -}; - -/** - * struct s3c_pl330_chan - Logical channel to communicate with - * a Physical peripheral. - * @pl330_chan_id: Token of a hardware channel thread of PL330 DMAC. - * NULL if the channel is available to be acquired. - * @id: ID of the peripheral that this channel can communicate with. - * @options: Options specified by the client. - * @sdaddr: Address provided via s3c2410_dma_devconfig. - * @node: To attach to the global list of channels. - * @lrq: Pointer to the last submitted pl330_req to PL330 core. - * @xfer_list: To manage list of xfers enqueued. - * @req: Two requests to communicate with the PL330 engine. - * @callback_fn: Callback function to the client. - * @rqcfg: Channel configuration for the xfers. - * @xfer_head: Pointer to the xfer to be next executed. - * @dmac: Pointer to the DMAC that manages this channel, NULL if the - * channel is available to be acquired. - * @client: Client of this channel. NULL if the - * channel is available to be acquired. - */ -struct s3c_pl330_chan { - void *pl330_chan_id; - enum dma_ch id; - unsigned int options; - unsigned long sdaddr; - struct list_head node; - struct pl330_req *lrq; - struct list_head xfer_list; - struct pl330_req req[2]; - s3c2410_dma_cbfn_t callback_fn; - struct pl330_reqcfg rqcfg; - struct s3c_pl330_xfer *xfer_head; - struct s3c_pl330_dmac *dmac; - struct s3c2410_dma_client *client; -}; - -/* All DMACs in the platform */ -static LIST_HEAD(dmac_list); - -/* All channels to peripherals in the platform */ -static LIST_HEAD(chan_list); - -/* - * Since we add resources(DMACs and Channels) to the global pool, - * we need to guard access to the resources using a global lock - */ -static DEFINE_SPINLOCK(res_lock); - -/* Returns the channel with ID 'id' in the chan_list */ -static struct s3c_pl330_chan *id_to_chan(const enum dma_ch id) -{ - struct s3c_pl330_chan *ch; - - list_for_each_entry(ch, &chan_list, node) - if (ch->id == id) - return ch; - - return NULL; -} - -/* Allocate a new channel with ID 'id' and add to chan_list */ -static void chan_add(const enum dma_ch id) -{ - struct s3c_pl330_chan *ch = id_to_chan(id); - - /* Return if the channel already exists */ - if (ch) - return; - - ch = kmalloc(sizeof(*ch), GFP_KERNEL); - /* Return silently to work with other channels */ - if (!ch) - return; - - ch->id = id; - ch->dmac = NULL; - - list_add_tail(&ch->node, &chan_list); -} - -/* If the channel is not yet acquired by any client */ -static bool chan_free(struct s3c_pl330_chan *ch) -{ - if (!ch) - return false; - - /* Channel points to some DMAC only when it's acquired */ - return ch->dmac ? false : true; -} - -/* - * Returns 0 is peripheral i/f is invalid or not present on the dmac. - * Index + 1, otherwise. - */ -static unsigned iface_of_dmac(struct s3c_pl330_dmac *dmac, enum dma_ch ch_id) -{ - enum dma_ch *id = dmac->peri; - int i; - - /* Discount invalid markers */ - if (ch_id == DMACH_MAX) - return 0; - - for (i = 0; i < PL330_MAX_PERI; i++) - if (id[i] == ch_id) - return i + 1; - - return 0; -} - -/* If all channel threads of the DMAC are busy */ -static inline bool dmac_busy(struct s3c_pl330_dmac *dmac) -{ - struct pl330_info *pi = dmac->pi; - - return (dmac->busy_chan < pi->pcfg.num_chan) ? false : true; -} - -/* - * Returns the number of free channels that - * can be handled by this dmac only. - */ -static unsigned ch_onlyby_dmac(struct s3c_pl330_dmac *dmac) -{ - enum dma_ch *id = dmac->peri; - struct s3c_pl330_dmac *d; - struct s3c_pl330_chan *ch; - unsigned found, count = 0; - enum dma_ch p; - int i; - - for (i = 0; i < PL330_MAX_PERI; i++) { - p = id[i]; - ch = id_to_chan(p); - - if (p == DMACH_MAX || !chan_free(ch)) - continue; - - found = 0; - list_for_each_entry(d, &dmac_list, node) { - if (d != dmac && iface_of_dmac(d, ch->id)) { - found = 1; - break; - } - } - if (!found) - count++; - } - - return count; -} - -/* - * Measure of suitability of 'dmac' handling 'ch' - * - * 0 indicates 'dmac' can not handle 'ch' either - * because it is not supported by the hardware or - * because all dmac channels are currently busy. - * - * >0 vlaue indicates 'dmac' has the capability. - * The bigger the value the more suitable the dmac. - */ -#define MAX_SUIT UINT_MAX -#define MIN_SUIT 0 - -static unsigned suitablility(struct s3c_pl330_dmac *dmac, - struct s3c_pl330_chan *ch) -{ - struct pl330_info *pi = dmac->pi; - enum dma_ch *id = dmac->peri; - struct s3c_pl330_dmac *d; - unsigned s; - int i; - - s = MIN_SUIT; - /* If all the DMAC channel threads are busy */ - if (dmac_busy(dmac)) - return s; - - for (i = 0; i < PL330_MAX_PERI; i++) - if (id[i] == ch->id) - break; - - /* If the 'dmac' can't talk to 'ch' */ - if (i == PL330_MAX_PERI) - return s; - - s = MAX_SUIT; - list_for_each_entry(d, &dmac_list, node) { - /* - * If some other dmac can talk to this - * peri and has some channel free. - */ - if (d != dmac && iface_of_dmac(d, ch->id) && !dmac_busy(d)) { - s = 0; - break; - } - } - if (s) - return s; - - s = 100; - - /* Good if free chans are more, bad otherwise */ - s += (pi->pcfg.num_chan - dmac->busy_chan) - ch_onlyby_dmac(dmac); - - return s; -} - -/* More than one DMAC may have capability to transfer data with the - * peripheral. This function assigns most suitable DMAC to manage the - * channel and hence communicate with the peripheral. - */ -static struct s3c_pl330_dmac *map_chan_to_dmac(struct s3c_pl330_chan *ch) -{ - struct s3c_pl330_dmac *d, *dmac = NULL; - unsigned sn, sl = MIN_SUIT; - - list_for_each_entry(d, &dmac_list, node) { - sn = suitablility(d, ch); - - if (sn == MAX_SUIT) - return d; - - if (sn > sl) - dmac = d; - } - - return dmac; -} - -/* Acquire the channel for peripheral 'id' */ -static struct s3c_pl330_chan *chan_acquire(const enum dma_ch id) -{ - struct s3c_pl330_chan *ch = id_to_chan(id); - struct s3c_pl330_dmac *dmac; - - /* If the channel doesn't exist or is already acquired */ - if (!ch || !chan_free(ch)) { - ch = NULL; - goto acq_exit; - } - - dmac = map_chan_to_dmac(ch); - /* If couldn't map */ - if (!dmac) { - ch = NULL; - goto acq_exit; - } - - dmac->busy_chan++; - ch->dmac = dmac; - -acq_exit: - return ch; -} - -/* Delete xfer from the queue */ -static inline void del_from_queue(struct s3c_pl330_xfer *xfer) -{ - struct s3c_pl330_xfer *t; - struct s3c_pl330_chan *ch; - int found; - - if (!xfer) - return; - - ch = xfer->chan; - - /* Make sure xfer is in the queue */ - found = 0; - list_for_each_entry(t, &ch->xfer_list, node) - if (t == xfer) { - found = 1; - break; - } - - if (!found) - return; - - /* If xfer is last entry in the queue */ - if (xfer->node.next == &ch->xfer_list) - t = list_entry(ch->xfer_list.next, - struct s3c_pl330_xfer, node); - else - t = list_entry(xfer->node.next, - struct s3c_pl330_xfer, node); - - /* If there was only one node left */ - if (t == xfer) - ch->xfer_head = NULL; - else if (ch->xfer_head == xfer) - ch->xfer_head = t; - - list_del(&xfer->node); -} - -/* Provides pointer to the next xfer in the queue. - * If CIRCULAR option is set, the list is left intact, - * otherwise the xfer is removed from the list. - * Forced delete 'pluck' can be set to override the CIRCULAR option. - */ -static struct s3c_pl330_xfer *get_from_queue(struct s3c_pl330_chan *ch, - int pluck) -{ - struct s3c_pl330_xfer *xfer = ch->xfer_head; - - if (!xfer) - return NULL; - - /* If xfer is last entry in the queue */ - if (xfer->node.next == &ch->xfer_list) - ch->xfer_head = list_entry(ch->xfer_list.next, - struct s3c_pl330_xfer, node); - else - ch->xfer_head = list_entry(xfer->node.next, - struct s3c_pl330_xfer, node); - - if (pluck || !(ch->options & S3C2410_DMAF_CIRCULAR)) - del_from_queue(xfer); - - return xfer; -} - -static inline void add_to_queue(struct s3c_pl330_chan *ch, - struct s3c_pl330_xfer *xfer, int front) -{ - struct pl330_xfer *xt; - - /* If queue empty */ - if (ch->xfer_head == NULL) - ch->xfer_head = xfer; - - xt = &ch->xfer_head->px; - /* If the head already submitted (CIRCULAR head) */ - if (ch->options & S3C2410_DMAF_CIRCULAR && - (xt == ch->req[0].x || xt == ch->req[1].x)) - ch->xfer_head = xfer; - - /* If this is a resubmission, it should go at the head */ - if (front) { - ch->xfer_head = xfer; - list_add(&xfer->node, &ch->xfer_list); - } else { - list_add_tail(&xfer->node, &ch->xfer_list); - } -} - -static inline void _finish_off(struct s3c_pl330_xfer *xfer, - enum s3c2410_dma_buffresult res, int ffree) -{ - struct s3c_pl330_chan *ch; - - if (!xfer) - return; - - ch = xfer->chan; - - /* Do callback */ - if (ch->callback_fn) - ch->callback_fn(NULL, xfer->token, xfer->px.bytes, res); - - /* Force Free or if buffer is not needed anymore */ - if (ffree || !(ch->options & S3C2410_DMAF_CIRCULAR)) - kmem_cache_free(ch->dmac->kmcache, xfer); -} - -static inline int s3c_pl330_submit(struct s3c_pl330_chan *ch, - struct pl330_req *r) -{ - struct s3c_pl330_xfer *xfer; - int ret = 0; - - /* If already submitted */ - if (r->x) - return 0; - - xfer = get_from_queue(ch, 0); - if (xfer) { - r->x = &xfer->px; - - /* Use max bandwidth for M<->M xfers */ - if (r->rqtype == MEMTOMEM) { - struct pl330_info *pi = xfer->chan->dmac->pi; - int burst = 1 << ch->rqcfg.brst_size; - u32 bytes = r->x->bytes; - int bl; - - bl = pi->pcfg.data_bus_width / 8; - bl *= pi->pcfg.data_buf_dep; - bl /= burst; - - /* src/dst_burst_len can't be more than 16 */ - if (bl > 16) - bl = 16; - - while (bl > 1) { - if (!(bytes % (bl * burst))) - break; - bl--; - } - - ch->rqcfg.brst_len = bl; - } else { - ch->rqcfg.brst_len = 1; - } - - ret = pl330_submit_req(ch->pl330_chan_id, r); - - /* If submission was successful */ - if (!ret) { - ch->lrq = r; /* latest submitted req */ - return 0; - } - - r->x = NULL; - - /* If both of the PL330 ping-pong buffers filled */ - if (ret == -EAGAIN) { - dev_err(ch->dmac->pi->dev, "%s:%d!\n", - __func__, __LINE__); - /* Queue back again */ - add_to_queue(ch, xfer, 1); - ret = 0; - } else { - dev_err(ch->dmac->pi->dev, "%s:%d!\n", - __func__, __LINE__); - _finish_off(xfer, S3C2410_RES_ERR, 0); - } - } - - return ret; -} - -static void s3c_pl330_rq(struct s3c_pl330_chan *ch, - struct pl330_req *r, enum pl330_op_err err) -{ - unsigned long flags; - struct s3c_pl330_xfer *xfer; - struct pl330_xfer *xl = r->x; - enum s3c2410_dma_buffresult res; - - spin_lock_irqsave(&res_lock, flags); - - r->x = NULL; - - s3c_pl330_submit(ch, r); - - spin_unlock_irqrestore(&res_lock, flags); - - /* Map result to S3C DMA API */ - if (err == PL330_ERR_NONE) - res = S3C2410_RES_OK; - else if (err == PL330_ERR_ABORT) - res = S3C2410_RES_ABORT; - else - res = S3C2410_RES_ERR; - - /* If last request had some xfer */ - if (xl) { - xfer = container_of(xl, struct s3c_pl330_xfer, px); - _finish_off(xfer, res, 0); - } else { - dev_info(ch->dmac->pi->dev, "%s:%d No Xfer?!\n", - __func__, __LINE__); - } -} - -static void s3c_pl330_rq0(void *token, enum pl330_op_err err) -{ - struct pl330_req *r = token; - struct s3c_pl330_chan *ch = container_of(r, - struct s3c_pl330_chan, req[0]); - s3c_pl330_rq(ch, r, err); -} - -static void s3c_pl330_rq1(void *token, enum pl330_op_err err) -{ - struct pl330_req *r = token; - struct s3c_pl330_chan *ch = container_of(r, - struct s3c_pl330_chan, req[1]); - s3c_pl330_rq(ch, r, err); -} - -/* Release an acquired channel */ -static void chan_release(struct s3c_pl330_chan *ch) -{ - struct s3c_pl330_dmac *dmac; - - if (chan_free(ch)) - return; - - dmac = ch->dmac; - ch->dmac = NULL; - dmac->busy_chan--; -} - -int s3c2410_dma_ctrl(enum dma_ch id, enum s3c2410_chan_op op) -{ - struct s3c_pl330_xfer *xfer; - enum pl330_chan_op pl330op; - struct s3c_pl330_chan *ch; - unsigned long flags; - int idx, ret; - - spin_lock_irqsave(&res_lock, flags); - - ch = id_to_chan(id); - - if (!ch || chan_free(ch)) { - ret = -EINVAL; - goto ctrl_exit; - } - - switch (op) { - case S3C2410_DMAOP_START: - /* Make sure both reqs are enqueued */ - idx = (ch->lrq == &ch->req[0]) ? 1 : 0; - s3c_pl330_submit(ch, &ch->req[idx]); - s3c_pl330_submit(ch, &ch->req[1 - idx]); - pl330op = PL330_OP_START; - break; - - case S3C2410_DMAOP_STOP: - pl330op = PL330_OP_ABORT; - break; - - case S3C2410_DMAOP_FLUSH: - pl330op = PL330_OP_FLUSH; - break; - - case S3C2410_DMAOP_PAUSE: - case S3C2410_DMAOP_RESUME: - case S3C2410_DMAOP_TIMEOUT: - case S3C2410_DMAOP_STARTED: - spin_unlock_irqrestore(&res_lock, flags); - return 0; - - default: - spin_unlock_irqrestore(&res_lock, flags); - return -EINVAL; - } - - ret = pl330_chan_ctrl(ch->pl330_chan_id, pl330op); - - if (pl330op == PL330_OP_START) { - spin_unlock_irqrestore(&res_lock, flags); - return ret; - } - - idx = (ch->lrq == &ch->req[0]) ? 1 : 0; - - /* Abort the current xfer */ - if (ch->req[idx].x) { - xfer = container_of(ch->req[idx].x, - struct s3c_pl330_xfer, px); - - /* Drop xfer during FLUSH */ - if (pl330op == PL330_OP_FLUSH) - del_from_queue(xfer); - - ch->req[idx].x = NULL; - - spin_unlock_irqrestore(&res_lock, flags); - _finish_off(xfer, S3C2410_RES_ABORT, - pl330op == PL330_OP_FLUSH ? 1 : 0); - spin_lock_irqsave(&res_lock, flags); - } - - /* Flush the whole queue */ - if (pl330op == PL330_OP_FLUSH) { - - if (ch->req[1 - idx].x) { - xfer = container_of(ch->req[1 - idx].x, - struct s3c_pl330_xfer, px); - - del_from_queue(xfer); - - ch->req[1 - idx].x = NULL; - - spin_unlock_irqrestore(&res_lock, flags); - _finish_off(xfer, S3C2410_RES_ABORT, 1); - spin_lock_irqsave(&res_lock, flags); - } - - /* Finish off the remaining in the queue */ - xfer = ch->xfer_head; - while (xfer) { - - del_from_queue(xfer); - - spin_unlock_irqrestore(&res_lock, flags); - _finish_off(xfer, S3C2410_RES_ABORT, 1); - spin_lock_irqsave(&res_lock, flags); - - xfer = ch->xfer_head; - } - } - -ctrl_exit: - spin_unlock_irqrestore(&res_lock, flags); - - return ret; -} -EXPORT_SYMBOL(s3c2410_dma_ctrl); - -int s3c2410_dma_enqueue(enum dma_ch id, void *token, - dma_addr_t addr, int size) -{ - struct s3c_pl330_chan *ch; - struct s3c_pl330_xfer *xfer; - unsigned long flags; - int idx, ret = 0; - - spin_lock_irqsave(&res_lock, flags); - - ch = id_to_chan(id); - - /* Error if invalid or free channel */ - if (!ch || chan_free(ch)) { - ret = -EINVAL; - goto enq_exit; - } - - /* Error if size is unaligned */ - if (ch->rqcfg.brst_size && size % (1 << ch->rqcfg.brst_size)) { - ret = -EINVAL; - goto enq_exit; - } - - xfer = kmem_cache_alloc(ch->dmac->kmcache, GFP_ATOMIC); - if (!xfer) { - ret = -ENOMEM; - goto enq_exit; - } - - xfer->token = token; - xfer->chan = ch; - xfer->px.bytes = size; - xfer->px.next = NULL; /* Single request */ - - /* For S3C DMA API, direction is always fixed for all xfers */ - if (ch->req[0].rqtype == MEMTODEV) { - xfer->px.src_addr = addr; - xfer->px.dst_addr = ch->sdaddr; - } else { - xfer->px.src_addr = ch->sdaddr; - xfer->px.dst_addr = addr; - } - - add_to_queue(ch, xfer, 0); - - /* Try submitting on either request */ - idx = (ch->lrq == &ch->req[0]) ? 1 : 0; - - if (!ch->req[idx].x) - s3c_pl330_submit(ch, &ch->req[idx]); - else - s3c_pl330_submit(ch, &ch->req[1 - idx]); - - spin_unlock_irqrestore(&res_lock, flags); - - if (ch->options & S3C2410_DMAF_AUTOSTART) - s3c2410_dma_ctrl(id, S3C2410_DMAOP_START); - - return 0; - -enq_exit: - spin_unlock_irqrestore(&res_lock, flags); - - return ret; -} -EXPORT_SYMBOL(s3c2410_dma_enqueue); - -int s3c2410_dma_request(enum dma_ch id, - struct s3c2410_dma_client *client, - void *dev) -{ - struct s3c_pl330_dmac *dmac; - struct s3c_pl330_chan *ch; - unsigned long flags; - int ret = 0; - - spin_lock_irqsave(&res_lock, flags); - - ch = chan_acquire(id); - if (!ch) { - ret = -EBUSY; - goto req_exit; - } - - dmac = ch->dmac; - - ch->pl330_chan_id = pl330_request_channel(dmac->pi); - if (!ch->pl330_chan_id) { - chan_release(ch); - ret = -EBUSY; - goto req_exit; - } - - ch->client = client; - ch->options = 0; /* Clear any option */ - ch->callback_fn = NULL; /* Clear any callback */ - ch->lrq = NULL; - - ch->rqcfg.brst_size = 2; /* Default word size */ - ch->rqcfg.swap = SWAP_NO; - ch->rqcfg.scctl = SCCTRL0; /* Noncacheable and nonbufferable */ - ch->rqcfg.dcctl = DCCTRL0; /* Noncacheable and nonbufferable */ - ch->rqcfg.privileged = 0; - ch->rqcfg.insnaccess = 0; - - /* Set invalid direction */ - ch->req[0].rqtype = DEVTODEV; - ch->req[1].rqtype = ch->req[0].rqtype; - - ch->req[0].cfg = &ch->rqcfg; - ch->req[1].cfg = ch->req[0].cfg; - - ch->req[0].peri = iface_of_dmac(dmac, id) - 1; /* Original index */ - ch->req[1].peri = ch->req[0].peri; - - ch->req[0].token = &ch->req[0]; - ch->req[0].xfer_cb = s3c_pl330_rq0; - ch->req[1].token = &ch->req[1]; - ch->req[1].xfer_cb = s3c_pl330_rq1; - - ch->req[0].x = NULL; - ch->req[1].x = NULL; - - /* Reset xfer list */ - INIT_LIST_HEAD(&ch->xfer_list); - ch->xfer_head = NULL; - -req_exit: - spin_unlock_irqrestore(&res_lock, flags); - - return ret; -} -EXPORT_SYMBOL(s3c2410_dma_request); - -int s3c2410_dma_free(enum dma_ch id, struct s3c2410_dma_client *client) -{ - struct s3c_pl330_chan *ch; - struct s3c_pl330_xfer *xfer; - unsigned long flags; - int ret = 0; - unsigned idx; - - spin_lock_irqsave(&res_lock, flags); - - ch = id_to_chan(id); - - if (!ch || chan_free(ch)) - goto free_exit; - - /* Refuse if someone else wanted to free the channel */ - if (ch->client != client) { - ret = -EBUSY; - goto free_exit; - } - - /* Stop any active xfer, Flushe the queue and do callbacks */ - pl330_chan_ctrl(ch->pl330_chan_id, PL330_OP_FLUSH); - - /* Abort the submitted requests */ - idx = (ch->lrq == &ch->req[0]) ? 1 : 0; - - if (ch->req[idx].x) { - xfer = container_of(ch->req[idx].x, - struct s3c_pl330_xfer, px); - - ch->req[idx].x = NULL; - del_from_queue(xfer); - - spin_unlock_irqrestore(&res_lock, flags); - _finish_off(xfer, S3C2410_RES_ABORT, 1); - spin_lock_irqsave(&res_lock, flags); - } - - if (ch->req[1 - idx].x) { - xfer = container_of(ch->req[1 - idx].x, - struct s3c_pl330_xfer, px); - - ch->req[1 - idx].x = NULL; - del_from_queue(xfer); - - spin_unlock_irqrestore(&res_lock, flags); - _finish_off(xfer, S3C2410_RES_ABORT, 1); - spin_lock_irqsave(&res_lock, flags); - } - - /* Pluck and Abort the queued requests in order */ - do { - xfer = get_from_queue(ch, 1); - - spin_unlock_irqrestore(&res_lock, flags); - _finish_off(xfer, S3C2410_RES_ABORT, 1); - spin_lock_irqsave(&res_lock, flags); - } while (xfer); - - ch->client = NULL; - - pl330_release_channel(ch->pl330_chan_id); - - ch->pl330_chan_id = NULL; - - chan_release(ch); - -free_exit: - spin_unlock_irqrestore(&res_lock, flags); - - return ret; -} -EXPORT_SYMBOL(s3c2410_dma_free); - -int s3c2410_dma_config(enum dma_ch id, int xferunit) -{ - struct s3c_pl330_chan *ch; - struct pl330_info *pi; - unsigned long flags; - int i, dbwidth, ret = 0; - - spin_lock_irqsave(&res_lock, flags); - - ch = id_to_chan(id); - - if (!ch || chan_free(ch)) { - ret = -EINVAL; - goto cfg_exit; - } - - pi = ch->dmac->pi; - dbwidth = pi->pcfg.data_bus_width / 8; - - /* Max size of xfer can be pcfg.data_bus_width */ - if (xferunit > dbwidth) { - ret = -EINVAL; - goto cfg_exit; - } - - i = 0; - while (xferunit != (1 << i)) - i++; - - /* If valid value */ - if (xferunit == (1 << i)) - ch->rqcfg.brst_size = i; - else - ret = -EINVAL; - -cfg_exit: - spin_unlock_irqrestore(&res_lock, flags); - - return ret; -} -EXPORT_SYMBOL(s3c2410_dma_config); - -/* Options that are supported by this driver */ -#define S3C_PL330_FLAGS (S3C2410_DMAF_CIRCULAR | S3C2410_DMAF_AUTOSTART) - -int s3c2410_dma_setflags(enum dma_ch id, unsigned int options) -{ - struct s3c_pl330_chan *ch; - unsigned long flags; - int ret = 0; - - spin_lock_irqsave(&res_lock, flags); - - ch = id_to_chan(id); - - if (!ch || chan_free(ch) || options & ~(S3C_PL330_FLAGS)) - ret = -EINVAL; - else - ch->options = options; - - spin_unlock_irqrestore(&res_lock, flags); - - return 0; -} -EXPORT_SYMBOL(s3c2410_dma_setflags); - -int s3c2410_dma_set_buffdone_fn(enum dma_ch id, s3c2410_dma_cbfn_t rtn) -{ - struct s3c_pl330_chan *ch; - unsigned long flags; - int ret = 0; - - spin_lock_irqsave(&res_lock, flags); - - ch = id_to_chan(id); - - if (!ch || chan_free(ch)) - ret = -EINVAL; - else - ch->callback_fn = rtn; - - spin_unlock_irqrestore(&res_lock, flags); - - return ret; -} -EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn); - -int s3c2410_dma_devconfig(enum dma_ch id, enum s3c2410_dmasrc source, - unsigned long address) -{ - struct s3c_pl330_chan *ch; - unsigned long flags; - int ret = 0; - - spin_lock_irqsave(&res_lock, flags); - - ch = id_to_chan(id); - - if (!ch || chan_free(ch)) { - ret = -EINVAL; - goto devcfg_exit; - } - - switch (source) { - case S3C2410_DMASRC_HW: /* P->M */ - ch->req[0].rqtype = DEVTOMEM; - ch->req[1].rqtype = DEVTOMEM; - ch->rqcfg.src_inc = 0; - ch->rqcfg.dst_inc = 1; - break; - case S3C2410_DMASRC_MEM: /* M->P */ - ch->req[0].rqtype = MEMTODEV; - ch->req[1].rqtype = MEMTODEV; - ch->rqcfg.src_inc = 1; - ch->rqcfg.dst_inc = 0; - break; - default: - ret = -EINVAL; - goto devcfg_exit; - } - - ch->sdaddr = address; - -devcfg_exit: - spin_unlock_irqrestore(&res_lock, flags); - - return ret; -} -EXPORT_SYMBOL(s3c2410_dma_devconfig); - -int s3c2410_dma_getposition(enum dma_ch id, dma_addr_t *src, dma_addr_t *dst) -{ - struct s3c_pl330_chan *ch = id_to_chan(id); - struct pl330_chanstatus status; - int ret; - - if (!ch || chan_free(ch)) - return -EINVAL; - - ret = pl330_chan_status(ch->pl330_chan_id, &status); - if (ret < 0) - return ret; - - *src = status.src_addr; - *dst = status.dst_addr; - - return 0; -} -EXPORT_SYMBOL(s3c2410_dma_getposition); - -static irqreturn_t pl330_irq_handler(int irq, void *data) -{ - if (pl330_update(data)) - return IRQ_HANDLED; - else - return IRQ_NONE; -} - -static int pl330_probe(struct platform_device *pdev) -{ - struct s3c_pl330_dmac *s3c_pl330_dmac; - struct s3c_pl330_platdata *pl330pd; - struct pl330_info *pl330_info; - struct resource *res; - int i, ret, irq; - - pl330pd = pdev->dev.platform_data; - - /* Can't do without the list of _32_ peripherals */ - if (!pl330pd || !pl330pd->peri) { - dev_err(&pdev->dev, "platform data missing!\n"); - return -ENODEV; - } - - pl330_info = kzalloc(sizeof(*pl330_info), GFP_KERNEL); - if (!pl330_info) - return -ENOMEM; - - pl330_info->pl330_data = NULL; - pl330_info->dev = &pdev->dev; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - ret = -ENODEV; - goto probe_err1; - } - - request_mem_region(res->start, resource_size(res), pdev->name); - - pl330_info->base = ioremap(res->start, resource_size(res)); - if (!pl330_info->base) { - ret = -ENXIO; - goto probe_err2; - } - - irq = platform_get_irq(pdev, 0); - if (irq < 0) { - ret = irq; - goto probe_err3; - } - - ret = request_irq(irq, pl330_irq_handler, 0, - dev_name(&pdev->dev), pl330_info); - if (ret) - goto probe_err4; - - /* Allocate a new DMAC */ - s3c_pl330_dmac = kmalloc(sizeof(*s3c_pl330_dmac), GFP_KERNEL); - if (!s3c_pl330_dmac) { - ret = -ENOMEM; - goto probe_err5; - } - - /* Get operation clock and enable it */ - s3c_pl330_dmac->clk = clk_get(&pdev->dev, "pdma"); - if (IS_ERR(s3c_pl330_dmac->clk)) { - dev_err(&pdev->dev, "Cannot get operation clock.\n"); - ret = -EINVAL; - goto probe_err6; - } - clk_enable(s3c_pl330_dmac->clk); - - ret = pl330_add(pl330_info); - if (ret) - goto probe_err7; - - /* Hook the info */ - s3c_pl330_dmac->pi = pl330_info; - - /* No busy channels */ - s3c_pl330_dmac->busy_chan = 0; - - s3c_pl330_dmac->kmcache = kmem_cache_create(dev_name(&pdev->dev), - sizeof(struct s3c_pl330_xfer), 0, 0, NULL); - - if (!s3c_pl330_dmac->kmcache) { - ret = -ENOMEM; - goto probe_err8; - } - - /* Get the list of peripherals */ - s3c_pl330_dmac->peri = pl330pd->peri; - - /* Attach to the list of DMACs */ - list_add_tail(&s3c_pl330_dmac->node, &dmac_list); - - /* Create a channel for each peripheral in the DMAC - * that is, if it doesn't already exist - */ - for (i = 0; i < PL330_MAX_PERI; i++) - if (s3c_pl330_dmac->peri[i] != DMACH_MAX) - chan_add(s3c_pl330_dmac->peri[i]); - - printk(KERN_INFO - "Loaded driver for PL330 DMAC-%d %s\n", pdev->id, pdev->name); - printk(KERN_INFO - "\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n", - pl330_info->pcfg.data_buf_dep, - pl330_info->pcfg.data_bus_width / 8, pl330_info->pcfg.num_chan, - pl330_info->pcfg.num_peri, pl330_info->pcfg.num_events); - - return 0; - -probe_err8: - pl330_del(pl330_info); -probe_err7: - clk_disable(s3c_pl330_dmac->clk); - clk_put(s3c_pl330_dmac->clk); -probe_err6: - kfree(s3c_pl330_dmac); -probe_err5: - free_irq(irq, pl330_info); -probe_err4: -probe_err3: - iounmap(pl330_info->base); -probe_err2: - release_mem_region(res->start, resource_size(res)); -probe_err1: - kfree(pl330_info); - - return ret; -} - -static int pl330_remove(struct platform_device *pdev) -{ - struct s3c_pl330_dmac *dmac, *d; - struct s3c_pl330_chan *ch; - unsigned long flags; - int del, found; - - if (!pdev->dev.platform_data) - return -EINVAL; - - spin_lock_irqsave(&res_lock, flags); - - found = 0; - list_for_each_entry(d, &dmac_list, node) - if (d->pi->dev == &pdev->dev) { - found = 1; - break; - } - - if (!found) { - spin_unlock_irqrestore(&res_lock, flags); - return 0; - } - - dmac = d; - - /* Remove all Channels that are managed only by this DMAC */ - list_for_each_entry(ch, &chan_list, node) { - - /* Only channels that are handled by this DMAC */ - if (iface_of_dmac(dmac, ch->id)) - del = 1; - else - continue; - - /* Don't remove if some other DMAC has it too */ - list_for_each_entry(d, &dmac_list, node) - if (d != dmac && iface_of_dmac(d, ch->id)) { - del = 0; - break; - } - - if (del) { - spin_unlock_irqrestore(&res_lock, flags); - s3c2410_dma_free(ch->id, ch->client); - spin_lock_irqsave(&res_lock, flags); - list_del(&ch->node); - kfree(ch); - } - } - - /* Disable operation clock */ - clk_disable(dmac->clk); - clk_put(dmac->clk); - - /* Remove the DMAC */ - list_del(&dmac->node); - kfree(dmac); - - spin_unlock_irqrestore(&res_lock, flags); - - return 0; -} - -static struct platform_driver pl330_driver = { - .driver = { - .owner = THIS_MODULE, - .name = "s3c-pl330", - }, - .probe = pl330_probe, - .remove = pl330_remove, -}; - -static int __init pl330_init(void) -{ - return platform_driver_register(&pl330_driver); -} -module_init(pl330_init); - -static void __exit pl330_exit(void) -{ - platform_driver_unregister(&pl330_driver); - return; -} -module_exit(pl330_exit); - -MODULE_AUTHOR("Jaswinder Singh <jassi.brar@samsung.com>"); -MODULE_DESCRIPTION("Driver for PL330 DMA Controller"); -MODULE_LICENSE("GPL"); diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index fff68d0d521..62cc8f98117 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -351,7 +351,7 @@ centro MACH_CENTRO CENTRO 1944 nokia_rx51 MACH_NOKIA_RX51 NOKIA_RX51 1955 omap_zoom2 MACH_OMAP_ZOOM2 OMAP_ZOOM2 1967 cpuat9260 MACH_CPUAT9260 CPUAT9260 1973 -eukrea_cpuimx27 MACH_CPUIMX27 CPUIMX27 1975 +eukrea_cpuimx27 MACH_EUKREA_CPUIMX27 EUKREA_CPUIMX27 1975 acs5k MACH_ACS5K ACS5K 1982 snapper_9260 MACH_SNAPPER_9260 SNAPPER_9260 1987 dsm320 MACH_DSM320 DSM320 1988 @@ -476,8 +476,8 @@ cns3420vb MACH_CNS3420VB CNS3420VB 2776 omap4_panda MACH_OMAP4_PANDA OMAP4_PANDA 2791 ti8168evm MACH_TI8168EVM TI8168EVM 2800 teton_bga MACH_TETON_BGA TETON_BGA 2816 -eukrea_cpuimx25sd MACH_EUKREA_CPUIMX25 EUKREA_CPUIMX25 2820 -eukrea_cpuimx35sd MACH_EUKREA_CPUIMX35 EUKREA_CPUIMX35 2821 +eukrea_cpuimx25sd MACH_EUKREA_CPUIMX25SD EUKREA_CPUIMX25SD 2820 +eukrea_cpuimx35sd MACH_EUKREA_CPUIMX35SD EUKREA_CPUIMX35SD 2821 eukrea_cpuimx51sd MACH_EUKREA_CPUIMX51SD EUKREA_CPUIMX51SD 2822 eukrea_cpuimx51 MACH_EUKREA_CPUIMX51 EUKREA_CPUIMX51 2823 smdkc210 MACH_SMDKC210 SMDKC210 2838 diff --git a/arch/avr32/kernel/syscall_table.S b/arch/avr32/kernel/syscall_table.S index c7fd394d28a..6eba53530d1 100644 --- a/arch/avr32/kernel/syscall_table.S +++ b/arch/avr32/kernel/syscall_table.S @@ -158,7 +158,7 @@ sys_call_table: .long sys_sched_rr_get_interval .long sys_nanosleep .long sys_poll - .long sys_nfsservctl /* 145 */ + .long sys_ni_syscall /* 145 was nfsservctl */ .long sys_setresgid .long sys_getresgid .long sys_prctl diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 225d311c970..e4137297b79 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -1543,7 +1543,7 @@ ENTRY(_sys_call_table) .long _sys_ni_syscall /* for vm86 */ .long _sys_ni_syscall /* old "query_module" */ .long _sys_ni_syscall /* sys_poll */ - .long _sys_nfsservctl + .long _sys_ni_syscall /* old nfsservctl */ .long _sys_setresgid /* setresgid16 */ /* 170 */ .long _sys_getresgid /* getresgid16 */ .long _sys_prctl diff --git a/arch/cris/arch-v10/kernel/entry.S b/arch/cris/arch-v10/kernel/entry.S index 1161883eb58..592fbe9dfb6 100644 --- a/arch/cris/arch-v10/kernel/entry.S +++ b/arch/cris/arch-v10/kernel/entry.S @@ -771,7 +771,7 @@ sys_call_table: .long sys_ni_syscall /* sys_vm86 */ .long sys_ni_syscall /* Old sys_query_module */ .long sys_poll - .long sys_nfsservctl + .long sys_ni_syscall /* old nfsservctl */ .long sys_setresgid16 /* 170 */ .long sys_getresgid16 .long sys_prctl diff --git a/arch/cris/arch-v32/kernel/entry.S b/arch/cris/arch-v32/kernel/entry.S index 84fed7e91ad..c3ea4694fba 100644 --- a/arch/cris/arch-v32/kernel/entry.S +++ b/arch/cris/arch-v32/kernel/entry.S @@ -714,7 +714,7 @@ sys_call_table: .long sys_ni_syscall /* sys_vm86 */ .long sys_ni_syscall /* Old sys_query_module */ .long sys_poll - .long sys_nfsservctl + .long sys_ni_syscall /* Old nfsservctl */ .long sys_setresgid16 /* 170 */ .long sys_getresgid16 .long sys_prctl diff --git a/arch/cris/include/asm/serial.h b/arch/cris/include/asm/serial.h new file mode 100644 index 00000000000..af7535a955f --- /dev/null +++ b/arch/cris/include/asm/serial.h @@ -0,0 +1,9 @@ +#ifndef _ASM_SERIAL_H +#define _ASM_SERIAL_H + +/* + * This assumes you have a 1.8432 MHz clock for your UART. + */ +#define BASE_BAUD (1843200 / 16) + +#endif /* _ASM_SERIAL_H */ diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S index 017d6d7b784..5ba23f715ea 100644 --- a/arch/frv/kernel/entry.S +++ b/arch/frv/kernel/entry.S @@ -1358,7 +1358,7 @@ sys_call_table: .long sys_ni_syscall /* for vm86 */ .long sys_ni_syscall /* Old sys_query_module */ .long sys_poll - .long sys_nfsservctl + .long sys_ni_syscall /* Old nfsservctl */ .long sys_setresgid16 /* 170 */ .long sys_getresgid16 .long sys_prctl diff --git a/arch/h8300/kernel/syscalls.S b/arch/h8300/kernel/syscalls.S index f4b2e67bcc3..4be2ea2fbe2 100644 --- a/arch/h8300/kernel/syscalls.S +++ b/arch/h8300/kernel/syscalls.S @@ -183,7 +183,7 @@ SYMBOL_NAME_LABEL(sys_call_table) .long SYMBOL_NAME(sys_ni_syscall) /* for vm86 */ .long SYMBOL_NAME(sys_ni_syscall) /* sys_query_module */ .long SYMBOL_NAME(sys_poll) - .long SYMBOL_NAME(sys_nfsservctl) + .long SYMBOL_NAME(sys_ni_syscall) /* old nfsservctl */ .long SYMBOL_NAME(sys_setresgid16) /* 170 */ .long SYMBOL_NAME(sys_getresgid16) .long SYMBOL_NAME(sys_prctl) diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S index 97dd2abdeb1..198c753d100 100644 --- a/arch/ia64/kernel/entry.S +++ b/arch/ia64/kernel/entry.S @@ -1614,7 +1614,7 @@ sys_call_table: data8 sys_sched_get_priority_min data8 sys_sched_rr_get_interval data8 sys_nanosleep - data8 sys_nfsservctl + data8 sys_ni_syscall // old nfsservctl data8 sys_prctl // 1170 data8 sys_getpagesize data8 sys_mmap2 diff --git a/arch/m32r/kernel/syscall_table.S b/arch/m32r/kernel/syscall_table.S index 528f2e6ad06..f365c19795e 100644 --- a/arch/m32r/kernel/syscall_table.S +++ b/arch/m32r/kernel/syscall_table.S @@ -168,7 +168,7 @@ ENTRY(sys_call_table) .long sys_tas /* vm86 syscall holder */ .long sys_ni_syscall /* query_module syscall holder */ .long sys_poll - .long sys_nfsservctl + .long sys_ni_syscall /* was nfsservctl */ .long sys_setresgid /* 170 */ .long sys_getresgid .long sys_prctl diff --git a/arch/m68k/include/asm/page_mm.h b/arch/m68k/include/asm/page_mm.h index 31d5570d656..89f201434b5 100644 --- a/arch/m68k/include/asm/page_mm.h +++ b/arch/m68k/include/asm/page_mm.h @@ -162,7 +162,7 @@ static inline __attribute_const__ int __virt_to_node_shift(void) pgdat->node_mem_map + (__pfn - pgdat->node_start_pfn); \ }) #define page_to_pfn(_page) ({ \ - struct page *__p = (_page); \ + const struct page *__p = (_page); \ struct pglist_data *pgdat; \ pgdat = &pg_data_map[page_to_nid(__p)]; \ ((__p) - pgdat->node_mem_map) + pgdat->node_start_pfn; \ diff --git a/arch/m68k/kernel/syscalltable.S b/arch/m68k/kernel/syscalltable.S index 00d1452f957..c468f2edaa8 100644 --- a/arch/m68k/kernel/syscalltable.S +++ b/arch/m68k/kernel/syscalltable.S @@ -189,7 +189,7 @@ ENTRY(sys_call_table) .long sys_getpagesize .long sys_ni_syscall /* old "query_module" */ .long sys_poll - .long sys_nfsservctl + .long sys_ni_syscall /* old nfsservctl */ .long sys_setresgid16 /* 170 */ .long sys_getresgid16 .long sys_prctl diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S index d915a122c86..8789daa2a34 100644 --- a/arch/microblaze/kernel/syscall_table.S +++ b/arch/microblaze/kernel/syscall_table.S @@ -173,7 +173,7 @@ ENTRY(sys_call_table) .long sys_ni_syscall /* sys_vm86 */ .long sys_ni_syscall /* Old sys_query_module */ .long sys_poll - .long sys_nfsservctl + .long sys_ni_syscall /* old nfsservctl */ .long sys_setresgid /* 170 */ .long sys_getresgid .long sys_prctl diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index e521420a45a..865bc7a6f5a 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -424,7 +424,7 @@ einval: li v0, -ENOSYS sys sys_getresuid 3 sys sys_ni_syscall 0 /* was sys_query_module */ sys sys_poll 3 - sys sys_nfsservctl 3 + sys sys_ni_syscall 0 /* was nfsservctl */ sys sys_setresgid 3 /* 4190 */ sys sys_getresgid 3 sys sys_prctl 5 diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index 85874d6a8a7..fb7334bea73 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -299,7 +299,7 @@ sys_call_table: PTR sys_ni_syscall /* 5170, was get_kernel_syms */ PTR sys_ni_syscall /* was query_module */ PTR sys_quotactl - PTR sys_nfsservctl + PTR sys_ni_syscall /* was nfsservctl */ PTR sys_ni_syscall /* res. for getpmsg */ PTR sys_ni_syscall /* 5175 for putpmsg */ PTR sys_ni_syscall /* res. for afs_syscall */ diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index b85842fc87a..f9296e894e4 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -294,7 +294,7 @@ EXPORT(sysn32_call_table) PTR sys_ni_syscall /* 6170, was get_kernel_syms */ PTR sys_ni_syscall /* was query_module */ PTR sys_quotactl - PTR compat_sys_nfsservctl + PTR sys_ni_syscall /* was nfsservctl */ PTR sys_ni_syscall /* res. for getpmsg */ PTR sys_ni_syscall /* 6175 for putpmsg */ PTR sys_ni_syscall /* res. for afs_syscall */ diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 46c4763edf2..4d7c9827706 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -392,7 +392,7 @@ sys_call_table: PTR sys_getresuid PTR sys_ni_syscall /* was query_module */ PTR sys_poll - PTR compat_sys_nfsservctl + PTR sys_ni_syscall /* was nfsservctl */ PTR sys_setresgid /* 4190 */ PTR sys_getresgid PTR sys_prctl diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S index ae435e1d566..3e3620d9fc4 100644 --- a/arch/mn10300/kernel/entry.S +++ b/arch/mn10300/kernel/entry.S @@ -589,7 +589,7 @@ ENTRY(sys_call_table) .long sys_ni_syscall /* vm86 */ .long sys_ni_syscall /* Old sys_query_module */ .long sys_poll - .long sys_nfsservctl + .long sys_ni_syscall /* was nfsservctl */ .long sys_setresgid16 /* 170 */ .long sys_getresgid16 .long sys_prctl diff --git a/arch/openrisc/include/asm/dma-mapping.h b/arch/openrisc/include/asm/dma-mapping.h index 052f877b52a..60b47223390 100644 --- a/arch/openrisc/include/asm/dma-mapping.h +++ b/arch/openrisc/include/asm/dma-mapping.h @@ -31,7 +31,6 @@ #define DMA_ERROR_CODE (~(dma_addr_t)0x0) -int dma_mapping_error(struct device *dev, dma_addr_t dma_addr); #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) @@ -47,6 +46,12 @@ dma_addr_t or1k_map_page(struct device *dev, struct page *page, void or1k_unmap_page(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction dir, struct dma_attrs *attrs); +int or1k_map_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction dir, + struct dma_attrs *attrs); +void or1k_unmap_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction dir, + struct dma_attrs *attrs); void or1k_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction dir); @@ -98,6 +103,51 @@ static inline void dma_unmap_single(struct device *dev, dma_addr_t addr, debug_dma_unmap_page(dev, addr, size, dir, true); } +static inline int dma_map_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction dir) +{ + int i, ents; + struct scatterlist *s; + + for_each_sg(sg, s, nents, i) + kmemcheck_mark_initialized(sg_virt(s), s->length); + BUG_ON(!valid_dma_direction(dir)); + ents = or1k_map_sg(dev, sg, nents, dir, NULL); + debug_dma_map_sg(dev, sg, nents, ents, dir); + + return ents; +} + +static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction dir) +{ + BUG_ON(!valid_dma_direction(dir)); + debug_dma_unmap_sg(dev, sg, nents, dir); + or1k_unmap_sg(dev, sg, nents, dir, NULL); +} + +static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, + size_t offset, size_t size, + enum dma_data_direction dir) +{ + dma_addr_t addr; + + kmemcheck_mark_initialized(page_address(page) + offset, size); + BUG_ON(!valid_dma_direction(dir)); + addr = or1k_map_page(dev, page, offset, size, dir, NULL); + debug_dma_map_page(dev, page, offset, size, dir, addr, false); + + return addr; +} + +static inline void dma_unmap_page(struct device *dev, dma_addr_t addr, + size_t size, enum dma_data_direction dir) +{ + BUG_ON(!valid_dma_direction(dir)); + or1k_unmap_page(dev, addr, size, dir, NULL); + debug_dma_unmap_page(dev, addr, size, dir, true); +} + static inline void dma_sync_single_for_cpu(struct device *dev, dma_addr_t addr, size_t size, enum dma_data_direction dir) @@ -119,7 +169,12 @@ static inline void dma_sync_single_for_device(struct device *dev, static inline int dma_supported(struct device *dev, u64 dma_mask) { /* Support 32 bit DMA mask exclusively */ - return dma_mask == 0xffffffffULL; + return dma_mask == DMA_BIT_MASK(32); +} + +static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +{ + return 0; } static inline int dma_set_mask(struct device *dev, u64 dma_mask) diff --git a/arch/openrisc/include/asm/sigcontext.h b/arch/openrisc/include/asm/sigcontext.h index 54a5c50132e..b79c2b19afb 100644 --- a/arch/openrisc/include/asm/sigcontext.h +++ b/arch/openrisc/include/asm/sigcontext.h @@ -23,16 +23,11 @@ /* This struct is saved by setup_frame in signal.c, to keep the current context while a signal handler is executed. It's restored by sys_sigreturn. - - To keep things simple, we use pt_regs here even though normally you just - specify the list of regs to save. Then we can use copy_from_user on the - entire regs instead of a bunch of get_user's as well... */ struct sigcontext { - struct pt_regs regs; /* needs to be first */ + struct user_regs_struct regs; /* needs to be first */ unsigned long oldmask; - unsigned long usp; /* usp before stacking this gunk on it */ }; #endif /* __ASM_OPENRISC_SIGCONTEXT_H */ diff --git a/arch/openrisc/kernel/dma.c b/arch/openrisc/kernel/dma.c index 968d3ee477e..f1c8ee2895d 100644 --- a/arch/openrisc/kernel/dma.c +++ b/arch/openrisc/kernel/dma.c @@ -154,6 +154,33 @@ void or1k_unmap_page(struct device *dev, dma_addr_t dma_handle, /* Nothing special to do here... */ } +int or1k_map_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction dir, + struct dma_attrs *attrs) +{ + struct scatterlist *s; + int i; + + for_each_sg(sg, s, nents, i) { + s->dma_address = or1k_map_page(dev, sg_page(s), s->offset, + s->length, dir, NULL); + } + + return nents; +} + +void or1k_unmap_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction dir, + struct dma_attrs *attrs) +{ + struct scatterlist *s; + int i; + + for_each_sg(sg, s, nents, i) { + or1k_unmap_page(dev, sg_dma_address(s), sg_dma_len(s), dir, NULL); + } +} + void or1k_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction dir) @@ -187,5 +214,4 @@ static int __init dma_init(void) return 0; } - fs_initcall(dma_init); diff --git a/arch/openrisc/kernel/signal.c b/arch/openrisc/kernel/signal.c index 5f759c76834..95207ab0c99 100644 --- a/arch/openrisc/kernel/signal.c +++ b/arch/openrisc/kernel/signal.c @@ -52,31 +52,25 @@ struct rt_sigframe { static int restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc) { unsigned int err = 0; - unsigned long old_usp; /* Alwys make any pending restarted system call return -EINTR */ current_thread_info()->restart_block.fn = do_no_restart_syscall; - /* restore the regs from &sc->regs (same as sc, since regs is first) + /* + * Restore the regs from &sc->regs. * (sc is already checked for VERIFY_READ since the sigframe was * checked in sys_sigreturn previously) */ - - if (__copy_from_user(regs, sc, sizeof(struct pt_regs))) + if (__copy_from_user(regs, sc->regs.gpr, 32 * sizeof(unsigned long))) + goto badframe; + if (__copy_from_user(®s->pc, &sc->regs.pc, sizeof(unsigned long))) + goto badframe; + if (__copy_from_user(®s->sr, &sc->regs.sr, sizeof(unsigned long))) goto badframe; /* make sure the SM-bit is cleared so user-mode cannot fool us */ regs->sr &= ~SPR_SR_SM; - /* restore the old USP as it was before we stacked the sc etc. - * (we cannot just pop the sigcontext since we aligned the sp and - * stuff after pushing it) - */ - - err |= __get_user(old_usp, &sc->usp); - - regs->sp = old_usp; - /* TODO: the other ports use regs->orig_XX to disable syscall checks * after this completes, but we don't use that mechanism. maybe we can * use it now ? @@ -137,18 +131,17 @@ static int setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs, unsigned long mask) { int err = 0; - unsigned long usp = regs->sp; - /* copy the regs. they are first in sc so we can use sc directly */ + /* copy the regs */ - err |= __copy_to_user(sc, regs, sizeof(struct pt_regs)); + err |= __copy_to_user(sc->regs.gpr, regs, 32 * sizeof(unsigned long)); + err |= __copy_to_user(&sc->regs.pc, ®s->pc, sizeof(unsigned long)); + err |= __copy_to_user(&sc->regs.sr, ®s->sr, sizeof(unsigned long)); /* then some other stuff */ err |= __put_user(mask, &sc->oldmask); - err |= __put_user(usp, &sc->usp); - return err; } diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S index e66366fd2ab..3735abd7f8f 100644 --- a/arch/parisc/kernel/syscall_table.S +++ b/arch/parisc/kernel/syscall_table.S @@ -259,7 +259,7 @@ ENTRY_SAME(ni_syscall) /* query_module */ ENTRY_SAME(poll) /* structs contain pointers and an in_addr... */ - ENTRY_COMP(nfsservctl) + ENTRY_SAME(ni_syscall) /* was nfsservctl */ ENTRY_SAME(setresgid) /* 170 */ ENTRY_SAME(getresgid) ENTRY_SAME(prctl) diff --git a/arch/powerpc/boot/dts/p1023rds.dts b/arch/powerpc/boot/dts/p1023rds.dts index bfa96aa8f2c..d9b776740a6 100644 --- a/arch/powerpc/boot/dts/p1023rds.dts +++ b/arch/powerpc/boot/dts/p1023rds.dts @@ -387,7 +387,7 @@ #size-cells = <1>; compatible = "cfi-flash"; reg = <0x0 0x0 0x02000000>; - bank-width = <1>; + bank-width = <2>; device-width = <1>; partition@0 { label = "ramdisk"; diff --git a/arch/powerpc/configs/85xx/p1023rds_defconfig b/arch/powerpc/configs/85xx/p1023rds_defconfig index 980ff8f61fd..3ff5a81c709 100644 --- a/arch/powerpc/configs/85xx/p1023rds_defconfig +++ b/arch/powerpc/configs/85xx/p1023rds_defconfig @@ -171,3 +171,4 @@ CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_DEV_FSL_CAAM=y diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig index 10562a5c65b..4311d02a3bf 100644 --- a/arch/powerpc/configs/corenet32_smp_defconfig +++ b/arch/powerpc/configs/corenet32_smp_defconfig @@ -185,3 +185,4 @@ CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_DEV_FSL_CAAM=y diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig index d32283555b5..c92c204a204 100644 --- a/arch/powerpc/configs/corenet64_smp_defconfig +++ b/arch/powerpc/configs/corenet64_smp_defconfig @@ -100,5 +100,8 @@ CONFIG_DEBUG_INFO=y CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_VIRQ_DEBUG=y CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=y +CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRYPTO_DEV_TALITOS=y +CONFIG_CRYPTO_DEV_FSL_CAAM=y diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index fcd85d2c72d..a3467bfb767 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -139,6 +139,7 @@ CONFIG_SND=y CONFIG_SND_INTEL8X0=y # CONFIG_SND_PPC is not set # CONFIG_SND_USB is not set +CONFIG_SND_SOC=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index 908c941fc24..9693f6ed3da 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -140,6 +140,7 @@ CONFIG_SND=y CONFIG_SND_INTEL8X0=y # CONFIG_SND_PPC is not set # CONFIG_SND_USB is not set +CONFIG_SND_SOC=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h index f6736b7da46..fa0d27a400d 100644 --- a/arch/powerpc/include/asm/systbl.h +++ b/arch/powerpc/include/asm/systbl.h @@ -171,7 +171,7 @@ SYSCALL_SPU(setresuid) SYSCALL_SPU(getresuid) SYSCALL(ni_syscall) SYSCALL_SPU(poll) -COMPAT_SYS(nfsservctl) +SYSCALL(ni_syscall) SYSCALL_SPU(setresgid) SYSCALL_SPU(getresgid) COMPAT_SYS_SPU(prctl) diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index 2de8551df40..c65f75aa7ff 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -54,6 +54,7 @@ #define ODSR_CLEAR 0x1c00 #define LTLEECSR_ENABLE_ALL 0xFFC000FC #define ESCSR_CLEAR 0x07120204 +#define IECSR_CLEAR 0x80000000 #define RIO_PORT1_EDCSR 0x0640 #define RIO_PORT2_EDCSR 0x0680 @@ -1089,11 +1090,11 @@ static void port_error_handler(struct rio_mport *port, int offset) if (offset == 0) { out_be32((u32 *)(rio_regs_win + RIO_PORT1_EDCSR), 0); - out_be32((u32 *)(rio_regs_win + RIO_PORT1_IECSR), 0); + out_be32((u32 *)(rio_regs_win + RIO_PORT1_IECSR), IECSR_CLEAR); out_be32((u32 *)(rio_regs_win + RIO_ESCSR), ESCSR_CLEAR); } else { out_be32((u32 *)(rio_regs_win + RIO_PORT2_EDCSR), 0); - out_be32((u32 *)(rio_regs_win + RIO_PORT2_IECSR), 0); + out_be32((u32 *)(rio_regs_win + RIO_PORT2_IECSR), IECSR_CLEAR); out_be32((u32 *)(rio_regs_win + RIO_PORT2_ESCSR), ESCSR_CLEAR); } } diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index 519eb5f187e..c0cb794bb36 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -658,12 +658,14 @@ static inline void pgste_set_pte(pte_t *ptep, pgste_t pgste) * struct gmap_struct - guest address space * @mm: pointer to the parent mm_struct * @table: pointer to the page directory + * @asce: address space control element for gmap page table * @crst_list: list of all crst tables used in the guest address space */ struct gmap { struct list_head list; struct mm_struct *mm; unsigned long *table; + unsigned long asce; struct list_head crst_list; }; diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c index 532fd432215..2b45591e158 100644 --- a/arch/s390/kernel/asm-offsets.c +++ b/arch/s390/kernel/asm-offsets.c @@ -10,6 +10,7 @@ #include <linux/sched.h> #include <asm/vdso.h> #include <asm/sigp.h> +#include <asm/pgtable.h> /* * Make sure that the compiler is new enough. We want a compiler that @@ -126,6 +127,7 @@ int main(void) DEFINE(__LC_KERNEL_STACK, offsetof(struct _lowcore, kernel_stack)); DEFINE(__LC_ASYNC_STACK, offsetof(struct _lowcore, async_stack)); DEFINE(__LC_PANIC_STACK, offsetof(struct _lowcore, panic_stack)); + DEFINE(__LC_USER_ASCE, offsetof(struct _lowcore, user_asce)); DEFINE(__LC_INT_CLOCK, offsetof(struct _lowcore, int_clock)); DEFINE(__LC_MCCK_CLOCK, offsetof(struct _lowcore, mcck_clock)); DEFINE(__LC_MACHINE_FLAGS, offsetof(struct _lowcore, machine_flags)); @@ -151,6 +153,7 @@ int main(void) DEFINE(__LC_VDSO_PER_CPU, offsetof(struct _lowcore, vdso_per_cpu_data)); DEFINE(__LC_GMAP, offsetof(struct _lowcore, gmap)); DEFINE(__LC_CMF_HPP, offsetof(struct _lowcore, cmf_hpp)); + DEFINE(__GMAP_ASCE, offsetof(struct gmap, asce)); #endif /* CONFIG_32BIT */ return 0; } diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index 08ab9aa6a0d..7526db6bf50 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -665,12 +665,6 @@ ENTRY(sys32_poll_wrapper) lgfr %r4,%r4 # long jg sys_poll # branch to system call -ENTRY(compat_sys_nfsservctl_wrapper) - lgfr %r2,%r2 # int - llgtr %r3,%r3 # struct compat_nfsctl_arg* - llgtr %r4,%r4 # union compat_nfsctl_res* - jg compat_sys_nfsservctl # branch to system call - ENTRY(sys32_setresgid16_wrapper) llgfr %r2,%r2 # __kernel_old_gid_emu31_t llgfr %r3,%r3 # __kernel_old_gid_emu31_t diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c index 068f8465c4e..f297456dba7 100644 --- a/arch/s390/kernel/early.c +++ b/arch/s390/kernel/early.c @@ -396,17 +396,19 @@ static __init void detect_machine_facilities(void) static __init void rescue_initrd(void) { #ifdef CONFIG_BLK_DEV_INITRD + unsigned long min_initrd_addr = (unsigned long) _end + (4UL << 20); /* - * Move the initrd right behind the bss section in case it starts - * within the bss section. So we don't overwrite it when the bss - * section gets cleared. + * Just like in case of IPL from VM reader we make sure there is a + * gap of 4MB between end of kernel and start of initrd. + * That way we can also be sure that saving an NSS will succeed, + * which however only requires different segments. */ if (!INITRD_START || !INITRD_SIZE) return; - if (INITRD_START >= (unsigned long) __bss_stop) + if (INITRD_START >= min_initrd_addr) return; - memmove(__bss_stop, (void *) INITRD_START, INITRD_SIZE); - INITRD_START = (unsigned long) __bss_stop; + memmove((void *) min_initrd_addr, (void *) INITRD_START, INITRD_SIZE); + INITRD_START = min_initrd_addr; #endif } diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index 5f729d627ce..713da076053 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -1076,6 +1076,11 @@ sie_loop: lg %r14,__LC_THREAD_INFO # pointer thread_info struct tm __TI_flags+7(%r14),_TIF_EXIT_SIE jnz sie_exit + lg %r14,__LC_GMAP # get gmap pointer + ltgr %r14,%r14 + jz sie_gmap + lctlg %c1,%c1,__GMAP_ASCE(%r14) # load primary asce +sie_gmap: lg %r14,__SF_EMPTY(%r15) # get control block pointer SPP __SF_EMPTY(%r15) # set guest id sie 0(%r14) @@ -1083,6 +1088,7 @@ sie_done: SPP __LC_CMF_HPP # set host id lg %r14,__LC_THREAD_INFO # pointer thread_info struct sie_exit: + lctlg %c1,%c1,__LC_USER_ASCE # load primary asce ni __TI_flags+6(%r14),255-(_TIF_SIE>>8) lg %r14,__SF_EMPTY+8(%r15) # load guest register save area stmg %r0,%r13,0(%r14) # save guest gprs 0-13 diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index 04361d5a427..48c71020636 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -1220,7 +1220,7 @@ static int __init reipl_fcp_init(void) /* sysfs: create fcp kset for mixing attr group and bin attrs */ reipl_fcp_kset = kset_create_and_add(IPL_FCP_STR, NULL, &reipl_kset->kobj); - if (!reipl_kset) { + if (!reipl_fcp_kset) { free_page((unsigned long) reipl_block_fcp); return -ENOMEM; } @@ -1618,7 +1618,8 @@ static struct shutdown_action vmcmd_action = {SHUTDOWN_ACTION_VMCMD_STR, static void stop_run(struct shutdown_trigger *trigger) { - if (strcmp(trigger->name, ON_PANIC_STR) == 0) + if (strcmp(trigger->name, ON_PANIC_STR) == 0 || + strcmp(trigger->name, ON_RESTART_STR) == 0) disabled_wait((unsigned long) __builtin_return_address(0)); while (sigp(smp_processor_id(), sigp_stop) == sigp_busy) cpu_relax(); @@ -1717,7 +1718,7 @@ static void do_panic(void) /* on restart */ static struct shutdown_trigger on_restart_trigger = {ON_RESTART_STR, - &reipl_action}; + &stop_action}; static ssize_t on_restart_show(struct kobject *kobj, struct kobj_attribute *attr, char *page) diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S index 6ee39ef8fe4..73eb08c874f 100644 --- a/arch/s390/kernel/syscalls.S +++ b/arch/s390/kernel/syscalls.S @@ -177,7 +177,7 @@ SYSCALL(sys_getresuid16,sys_ni_syscall,sys32_getresuid16_wrapper) /* 165 old get NI_SYSCALL /* for vm86 */ NI_SYSCALL /* old sys_query_module */ SYSCALL(sys_poll,sys_poll,sys32_poll_wrapper) -SYSCALL(sys_nfsservctl,sys_nfsservctl,compat_sys_nfsservctl_wrapper) +NI_SYSCALL /* old nfsservctl */ SYSCALL(sys_setresgid16,sys_ni_syscall,sys32_setresgid16_wrapper) /* 170 old setresgid16 syscall */ SYSCALL(sys_getresgid16,sys_ni_syscall,sys32_getresgid16_wrapper) /* old getresgid16 syscall */ SYSCALL(sys_prctl,sys_prctl,sys32_prctl_wrapper) diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index f17296e4fc8..dc2b580e27b 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -123,6 +123,7 @@ int kvm_dev_ioctl_check_extension(long ext) switch (ext) { case KVM_CAP_S390_PSW: + case KVM_CAP_S390_GMAP: r = 1; break; default: @@ -263,10 +264,12 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu) vcpu->arch.guest_fpregs.fpc &= FPC_VALID_MASK; restore_fp_regs(&vcpu->arch.guest_fpregs); restore_access_regs(vcpu->arch.guest_acrs); + gmap_enable(vcpu->arch.gmap); } void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu) { + gmap_disable(vcpu->arch.gmap); save_fp_regs(&vcpu->arch.guest_fpregs); save_access_regs(vcpu->arch.guest_acrs); restore_fp_regs(&vcpu->arch.host_fpregs); @@ -461,7 +464,6 @@ static void __vcpu_run(struct kvm_vcpu *vcpu) local_irq_disable(); kvm_guest_enter(); local_irq_enable(); - gmap_enable(vcpu->arch.gmap); VCPU_EVENT(vcpu, 6, "entering sie flags %x", atomic_read(&vcpu->arch.sie_block->cpuflags)); if (sie64a(vcpu->arch.sie_block, vcpu->arch.guest_gprs)) { @@ -470,7 +472,6 @@ static void __vcpu_run(struct kvm_vcpu *vcpu) } VCPU_EVENT(vcpu, 6, "exit sie icptcode %d", vcpu->arch.sie_block->icptcode); - gmap_disable(vcpu->arch.gmap); local_irq_disable(); kvm_guest_exit(); local_irq_enable(); diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c index 4d1f2bce87b..f69ff3c1349 100644 --- a/arch/s390/mm/pgtable.c +++ b/arch/s390/mm/pgtable.c @@ -160,6 +160,8 @@ struct gmap *gmap_alloc(struct mm_struct *mm) table = (unsigned long *) page_to_phys(page); crst_table_init(table, _REGION1_ENTRY_EMPTY); gmap->table = table; + gmap->asce = _ASCE_TYPE_REGION1 | _ASCE_TABLE_LENGTH | + _ASCE_USER_BITS | __pa(table); list_add(&gmap->list, &mm->context.gmap_list); return gmap; @@ -240,10 +242,6 @@ EXPORT_SYMBOL_GPL(gmap_free); */ void gmap_enable(struct gmap *gmap) { - /* Load primary space page table origin. */ - S390_lowcore.user_asce = _ASCE_TYPE_REGION1 | _ASCE_TABLE_LENGTH | - _ASCE_USER_BITS | __pa(gmap->table); - asm volatile("lctlg 1,1,%0\n" : : "m" (S390_lowcore.user_asce) ); S390_lowcore.gmap = (unsigned long) gmap; } EXPORT_SYMBOL_GPL(gmap_enable); @@ -254,10 +252,6 @@ EXPORT_SYMBOL_GPL(gmap_enable); */ void gmap_disable(struct gmap *gmap) { - /* Load primary space page table origin. */ - S390_lowcore.user_asce = - gmap->mm->context.asce_bits | __pa(gmap->mm->pgd); - asm volatile("lctlg 1,1,%0\n" : : "m" (S390_lowcore.user_asce) ); S390_lowcore.gmap = 0UL; } EXPORT_SYMBOL_GPL(gmap_disable); diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h index b97baf81a87..2d3679b2447 100644 --- a/arch/sh/include/asm/ptrace.h +++ b/arch/sh/include/asm/ptrace.h @@ -123,7 +123,7 @@ static inline unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs, struct perf_event; struct perf_sample_data; -extern void ptrace_triggered(struct perf_event *bp, int nmi, +extern void ptrace_triggered(struct perf_event *bp, struct perf_sample_data *data, struct pt_regs *regs); #define task_pt_regs(task) \ diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c index e915deafac8..05559295d2c 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c @@ -15,6 +15,7 @@ #include <linux/serial_sci.h> #include <linux/io.h> #include <linux/mm.h> +#include <linux/dma-mapping.h> #include <linux/sh_timer.h> #include <linux/sh_dma.h> diff --git a/arch/sh/kernel/idle.c b/arch/sh/kernel/idle.c index 32114e0941a..db4ecd731a0 100644 --- a/arch/sh/kernel/idle.c +++ b/arch/sh/kernel/idle.c @@ -22,7 +22,7 @@ #include <linux/atomic.h> #include <asm/smp.h> -static void (*pm_idle)(void); +void (*pm_idle)(void); static int hlt_counter; diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S index 39b051de4c7..293e39c59c0 100644 --- a/arch/sh/kernel/syscalls_32.S +++ b/arch/sh/kernel/syscalls_32.S @@ -185,7 +185,7 @@ ENTRY(sys_call_table) .long sys_ni_syscall /* vm86 */ .long sys_ni_syscall /* old "query_module" */ .long sys_poll - .long sys_nfsservctl + .long sys_ni_syscall /* was nfsservctl */ .long sys_setresgid16 /* 170 */ .long sys_getresgid16 .long sys_prctl diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S index 089c4d825d0..ceb34b94afa 100644 --- a/arch/sh/kernel/syscalls_64.S +++ b/arch/sh/kernel/syscalls_64.S @@ -189,7 +189,7 @@ sys_call_table: .long sys_ni_syscall /* vm86 */ .long sys_ni_syscall /* old "query_module" */ .long sys_poll - .long sys_nfsservctl + .long sys_ni_syscall /* was nfsservctl */ .long sys_setresgid16 /* 170 */ .long sys_getresgid16 .long sys_prctl diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c index d9006f8ffc1..7bbef95c9d1 100644 --- a/arch/sh/kernel/traps_32.c +++ b/arch/sh/kernel/traps_32.c @@ -316,6 +316,35 @@ static int handle_unaligned_ins(insn_size_t instruction, struct pt_regs *regs, break; } break; + + case 9: /* mov.w @(disp,PC),Rn */ + srcu = (unsigned char __user *)regs->pc; + srcu += 4; + srcu += (instruction & 0x00FF) << 1; + dst = (unsigned char *)rn; + *(unsigned long *)dst = 0; + +#if !defined(__LITTLE_ENDIAN__) + dst += 2; +#endif + + if (ma->from(dst, srcu, 2)) + goto fetch_fault; + sign_extend(2, dst); + ret = 0; + break; + + case 0xd: /* mov.l @(disp,PC),Rn */ + srcu = (unsigned char __user *)(regs->pc & ~0x3); + srcu += 4; + srcu += (instruction & 0x00FF) << 2; + dst = (unsigned char *)rn; + *(unsigned long *)dst = 0; + + if (ma->from(dst, srcu, 4)) + goto fetch_fault; + ret = 0; + break; } return ret; @@ -466,6 +495,7 @@ int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs, case 0x0500: /* mov.w @(disp,Rm),R0 */ goto simple; case 0x0B00: /* bf lab - no delayslot*/ + ret = 0; break; case 0x0F00: /* bf/s lab */ ret = handle_delayslot(regs, instruction, ma); @@ -479,6 +509,7 @@ int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs, } break; case 0x0900: /* bt lab - no delayslot */ + ret = 0; break; case 0x0D00: /* bt/s lab */ ret = handle_delayslot(regs, instruction, ma); @@ -494,6 +525,9 @@ int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs, } break; + case 0x9000: /* mov.w @(disp,Rm),Rn */ + goto simple; + case 0xA000: /* bra label */ ret = handle_delayslot(regs, instruction, ma); if (ret==0) @@ -507,6 +541,9 @@ int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs, regs->pc += SH_PC_12BIT_OFFSET(instruction); } break; + + case 0xD000: /* mov.l @(disp,Rm),Rn */ + goto simple; } return ret; diff --git a/arch/sparc/include/asm/sigcontext.h b/arch/sparc/include/asm/sigcontext.h index a1607d18035..69914d74813 100644 --- a/arch/sparc/include/asm/sigcontext.h +++ b/arch/sparc/include/asm/sigcontext.h @@ -45,6 +45,19 @@ typedef struct { int si_mask; } __siginfo32_t; +#define __SIGC_MAXWIN 7 + +typedef struct { + unsigned long locals[8]; + unsigned long ins[8]; +} __siginfo_reg_window; + +typedef struct { + int wsaved; + __siginfo_reg_window reg_window[__SIGC_MAXWIN]; + unsigned long rwbuf_stkptrs[__SIGC_MAXWIN]; +} __siginfo_rwin_t; + #ifdef CONFIG_SPARC64 typedef struct { unsigned int si_float_regs [64]; @@ -73,6 +86,7 @@ struct sigcontext { unsigned long ss_size; } sigc_stack; unsigned long sigc_mask; + __siginfo_rwin_t * sigc_rwin_save; }; #else diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile index b90b4a1d070..cb85458f89d 100644 --- a/arch/sparc/kernel/Makefile +++ b/arch/sparc/kernel/Makefile @@ -32,6 +32,7 @@ obj-$(CONFIG_SPARC32) += sun4m_irq.o sun4c_irq.o sun4d_irq.o obj-y += process_$(BITS).o obj-y += signal_$(BITS).o +obj-y += sigutil_$(BITS).o obj-$(CONFIG_SPARC32) += ioport.o obj-y += setup_$(BITS).o obj-y += idprom.o diff --git a/arch/sparc/kernel/irq.h b/arch/sparc/kernel/irq.h index 100b9c204e7..42851122bbd 100644 --- a/arch/sparc/kernel/irq.h +++ b/arch/sparc/kernel/irq.h @@ -88,7 +88,7 @@ BTFIXUPDEF_CALL(void, set_irq_udt, int) #define set_irq_udt(cpu) BTFIXUP_CALL(set_irq_udt)(cpu) /* All SUN4D IPIs are sent on this IRQ, may be shared with hard IRQs */ -#define SUN4D_IPI_IRQ 14 +#define SUN4D_IPI_IRQ 13 extern void sun4d_ipi_interrupt(void); diff --git a/arch/sparc/kernel/setup_64.c b/arch/sparc/kernel/setup_64.c index 3e9daea1653..3c5bb784214 100644 --- a/arch/sparc/kernel/setup_64.c +++ b/arch/sparc/kernel/setup_64.c @@ -440,8 +440,14 @@ static void __init init_sparc64_elf_hwcap(void) cap |= AV_SPARC_VIS; if (tlb_type == cheetah || tlb_type == cheetah_plus) cap |= AV_SPARC_VIS | AV_SPARC_VIS2; - if (tlb_type == cheetah_plus) - cap |= AV_SPARC_POPC; + if (tlb_type == cheetah_plus) { + unsigned long impl, ver; + + __asm__ __volatile__("rdpr %%ver, %0" : "=r" (ver)); + impl = ((ver >> 32) & 0xffff); + if (impl == PANTHER_IMPL) + cap |= AV_SPARC_POPC; + } if (tlb_type == hypervisor) { if (sun4v_chip_type == SUN4V_CHIP_NIAGARA1) cap |= AV_SPARC_ASI_BLK_INIT; diff --git a/arch/sparc/kernel/signal32.c b/arch/sparc/kernel/signal32.c index 75fad425e24..1ba95aff5d5 100644 --- a/arch/sparc/kernel/signal32.c +++ b/arch/sparc/kernel/signal32.c @@ -29,6 +29,8 @@ #include <asm/visasm.h> #include <asm/compat_signal.h> +#include "sigutil.h" + #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) /* This magic should be in g_upper[0] for all upper parts @@ -44,14 +46,14 @@ typedef struct { struct signal_frame32 { struct sparc_stackf32 ss; __siginfo32_t info; - /* __siginfo_fpu32_t * */ u32 fpu_save; + /* __siginfo_fpu_t * */ u32 fpu_save; unsigned int insns[2]; unsigned int extramask[_COMPAT_NSIG_WORDS - 1]; unsigned int extra_size; /* Should be sizeof(siginfo_extra_v8plus_t) */ /* Only valid if (info.si_regs.psr & (PSR_VERS|PSR_IMPL)) == PSR_V8PLUS */ siginfo_extra_v8plus_t v8plus; - __siginfo_fpu_t fpu_state; -}; + /* __siginfo_rwin_t * */u32 rwin_save; +} __attribute__((aligned(8))); typedef struct compat_siginfo{ int si_signo; @@ -110,18 +112,14 @@ struct rt_signal_frame32 { compat_siginfo_t info; struct pt_regs32 regs; compat_sigset_t mask; - /* __siginfo_fpu32_t * */ u32 fpu_save; + /* __siginfo_fpu_t * */ u32 fpu_save; unsigned int insns[2]; stack_t32 stack; unsigned int extra_size; /* Should be sizeof(siginfo_extra_v8plus_t) */ /* Only valid if (regs.psr & (PSR_VERS|PSR_IMPL)) == PSR_V8PLUS */ siginfo_extra_v8plus_t v8plus; - __siginfo_fpu_t fpu_state; -}; - -/* Align macros */ -#define SF_ALIGNEDSZ (((sizeof(struct signal_frame32) + 15) & (~15))) -#define RT_ALIGNEDSZ (((sizeof(struct rt_signal_frame32) + 15) & (~15))) + /* __siginfo_rwin_t * */u32 rwin_save; +} __attribute__((aligned(8))); int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from) { @@ -192,30 +190,13 @@ int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from) return 0; } -static int restore_fpu_state32(struct pt_regs *regs, __siginfo_fpu_t __user *fpu) -{ - unsigned long *fpregs = current_thread_info()->fpregs; - unsigned long fprs; - int err; - - err = __get_user(fprs, &fpu->si_fprs); - fprs_write(0); - regs->tstate &= ~TSTATE_PEF; - if (fprs & FPRS_DL) - err |= copy_from_user(fpregs, &fpu->si_float_regs[0], (sizeof(unsigned int) * 32)); - if (fprs & FPRS_DU) - err |= copy_from_user(fpregs+16, &fpu->si_float_regs[32], (sizeof(unsigned int) * 32)); - err |= __get_user(current_thread_info()->xfsr[0], &fpu->si_fsr); - err |= __get_user(current_thread_info()->gsr[0], &fpu->si_gsr); - current_thread_info()->fpsaved[0] |= fprs; - return err; -} - void do_sigreturn32(struct pt_regs *regs) { struct signal_frame32 __user *sf; + compat_uptr_t fpu_save; + compat_uptr_t rwin_save; unsigned int psr; - unsigned pc, npc, fpu_save; + unsigned pc, npc; sigset_t set; unsigned seta[_COMPAT_NSIG_WORDS]; int err, i; @@ -273,8 +254,13 @@ void do_sigreturn32(struct pt_regs *regs) pt_regs_clear_syscall(regs); err |= __get_user(fpu_save, &sf->fpu_save); - if (fpu_save) - err |= restore_fpu_state32(regs, &sf->fpu_state); + if (!err && fpu_save) + err |= restore_fpu_state(regs, compat_ptr(fpu_save)); + err |= __get_user(rwin_save, &sf->rwin_save); + if (!err && rwin_save) { + if (restore_rwin_state(compat_ptr(rwin_save))) + goto segv; + } err |= __get_user(seta[0], &sf->info.si_mask); err |= copy_from_user(seta+1, &sf->extramask, (_COMPAT_NSIG_WORDS - 1) * sizeof(unsigned int)); @@ -300,7 +286,9 @@ segv: asmlinkage void do_rt_sigreturn32(struct pt_regs *regs) { struct rt_signal_frame32 __user *sf; - unsigned int psr, pc, npc, fpu_save, u_ss_sp; + unsigned int psr, pc, npc, u_ss_sp; + compat_uptr_t fpu_save; + compat_uptr_t rwin_save; mm_segment_t old_fs; sigset_t set; compat_sigset_t seta; @@ -359,8 +347,8 @@ asmlinkage void do_rt_sigreturn32(struct pt_regs *regs) pt_regs_clear_syscall(regs); err |= __get_user(fpu_save, &sf->fpu_save); - if (fpu_save) - err |= restore_fpu_state32(regs, &sf->fpu_state); + if (!err && fpu_save) + err |= restore_fpu_state(regs, compat_ptr(fpu_save)); err |= copy_from_user(&seta, &sf->mask, sizeof(compat_sigset_t)); err |= __get_user(u_ss_sp, &sf->stack.ss_sp); st.ss_sp = compat_ptr(u_ss_sp); @@ -376,6 +364,12 @@ asmlinkage void do_rt_sigreturn32(struct pt_regs *regs) do_sigaltstack((stack_t __user *) &st, NULL, (unsigned long)sf); set_fs(old_fs); + err |= __get_user(rwin_save, &sf->rwin_save); + if (!err && rwin_save) { + if (restore_rwin_state(compat_ptr(rwin_save))) + goto segv; + } + switch (_NSIG_WORDS) { case 4: set.sig[3] = seta.sig[6] + (((long)seta.sig[7]) << 32); case 3: set.sig[2] = seta.sig[4] + (((long)seta.sig[5]) << 32); @@ -433,26 +427,6 @@ static void __user *get_sigframe(struct sigaction *sa, struct pt_regs *regs, uns return (void __user *) sp; } -static int save_fpu_state32(struct pt_regs *regs, __siginfo_fpu_t __user *fpu) -{ - unsigned long *fpregs = current_thread_info()->fpregs; - unsigned long fprs; - int err = 0; - - fprs = current_thread_info()->fpsaved[0]; - if (fprs & FPRS_DL) - err |= copy_to_user(&fpu->si_float_regs[0], fpregs, - (sizeof(unsigned int) * 32)); - if (fprs & FPRS_DU) - err |= copy_to_user(&fpu->si_float_regs[32], fpregs+16, - (sizeof(unsigned int) * 32)); - err |= __put_user(current_thread_info()->xfsr[0], &fpu->si_fsr); - err |= __put_user(current_thread_info()->gsr[0], &fpu->si_gsr); - err |= __put_user(fprs, &fpu->si_fprs); - - return err; -} - /* The I-cache flush instruction only works in the primary ASI, which * right now is the nucleus, aka. kernel space. * @@ -515,18 +489,23 @@ static int setup_frame32(struct k_sigaction *ka, struct pt_regs *regs, int signo, sigset_t *oldset) { struct signal_frame32 __user *sf; + int i, err, wsaved; + void __user *tail; int sigframe_size; u32 psr; - int i, err; unsigned int seta[_COMPAT_NSIG_WORDS]; /* 1. Make sure everything is clean */ synchronize_user_stack(); save_and_clear_fpu(); - sigframe_size = SF_ALIGNEDSZ; - if (!(current_thread_info()->fpsaved[0] & FPRS_FEF)) - sigframe_size -= sizeof(__siginfo_fpu_t); + wsaved = get_thread_wsaved(); + + sigframe_size = sizeof(*sf); + if (current_thread_info()->fpsaved[0] & FPRS_FEF) + sigframe_size += sizeof(__siginfo_fpu_t); + if (wsaved) + sigframe_size += sizeof(__siginfo_rwin_t); sf = (struct signal_frame32 __user *) get_sigframe(&ka->sa, regs, sigframe_size); @@ -534,8 +513,7 @@ static int setup_frame32(struct k_sigaction *ka, struct pt_regs *regs, if (invalid_frame_pointer(sf, sigframe_size)) goto sigill; - if (get_thread_wsaved() != 0) - goto sigill; + tail = (sf + 1); /* 2. Save the current process state */ if (test_thread_flag(TIF_32BIT)) { @@ -560,11 +538,22 @@ static int setup_frame32(struct k_sigaction *ka, struct pt_regs *regs, &sf->v8plus.asi); if (psr & PSR_EF) { - err |= save_fpu_state32(regs, &sf->fpu_state); - err |= __put_user((u64)&sf->fpu_state, &sf->fpu_save); + __siginfo_fpu_t __user *fp = tail; + tail += sizeof(*fp); + err |= save_fpu_state(regs, fp); + err |= __put_user((u64)fp, &sf->fpu_save); } else { err |= __put_user(0, &sf->fpu_save); } + if (wsaved) { + __siginfo_rwin_t __user *rwp = tail; + tail += sizeof(*rwp); + err |= save_rwin_state(wsaved, rwp); + err |= __put_user((u64)rwp, &sf->rwin_save); + set_thread_wsaved(0); + } else { + err |= __put_user(0, &sf->rwin_save); + } switch (_NSIG_WORDS) { case 4: seta[7] = (oldset->sig[3] >> 32); @@ -580,10 +569,21 @@ static int setup_frame32(struct k_sigaction *ka, struct pt_regs *regs, err |= __copy_to_user(sf->extramask, seta + 1, (_COMPAT_NSIG_WORDS - 1) * sizeof(unsigned int)); - err |= copy_in_user((u32 __user *)sf, - (u32 __user *)(regs->u_regs[UREG_FP]), - sizeof(struct reg_window32)); - + if (!wsaved) { + err |= copy_in_user((u32 __user *)sf, + (u32 __user *)(regs->u_regs[UREG_FP]), + sizeof(struct reg_window32)); + } else { + struct reg_window *rp; + + rp = ¤t_thread_info()->reg_window[wsaved - 1]; + for (i = 0; i < 8; i++) + err |= __put_user(rp->locals[i], &sf->ss.locals[i]); + for (i = 0; i < 6; i++) + err |= __put_user(rp->ins[i], &sf->ss.ins[i]); + err |= __put_user(rp->ins[6], &sf->ss.fp); + err |= __put_user(rp->ins[7], &sf->ss.callers_pc); + } if (err) goto sigsegv; @@ -613,7 +613,6 @@ static int setup_frame32(struct k_sigaction *ka, struct pt_regs *regs, err |= __put_user(0x91d02010, &sf->insns[1]); /*t 0x10*/ if (err) goto sigsegv; - flush_signal_insns(address); } return 0; @@ -632,18 +631,23 @@ static int setup_rt_frame32(struct k_sigaction *ka, struct pt_regs *regs, siginfo_t *info) { struct rt_signal_frame32 __user *sf; + int i, err, wsaved; + void __user *tail; int sigframe_size; u32 psr; - int i, err; compat_sigset_t seta; /* 1. Make sure everything is clean */ synchronize_user_stack(); save_and_clear_fpu(); - sigframe_size = RT_ALIGNEDSZ; - if (!(current_thread_info()->fpsaved[0] & FPRS_FEF)) - sigframe_size -= sizeof(__siginfo_fpu_t); + wsaved = get_thread_wsaved(); + + sigframe_size = sizeof(*sf); + if (current_thread_info()->fpsaved[0] & FPRS_FEF) + sigframe_size += sizeof(__siginfo_fpu_t); + if (wsaved) + sigframe_size += sizeof(__siginfo_rwin_t); sf = (struct rt_signal_frame32 __user *) get_sigframe(&ka->sa, regs, sigframe_size); @@ -651,8 +655,7 @@ static int setup_rt_frame32(struct k_sigaction *ka, struct pt_regs *regs, if (invalid_frame_pointer(sf, sigframe_size)) goto sigill; - if (get_thread_wsaved() != 0) - goto sigill; + tail = (sf + 1); /* 2. Save the current process state */ if (test_thread_flag(TIF_32BIT)) { @@ -677,11 +680,22 @@ static int setup_rt_frame32(struct k_sigaction *ka, struct pt_regs *regs, &sf->v8plus.asi); if (psr & PSR_EF) { - err |= save_fpu_state32(regs, &sf->fpu_state); - err |= __put_user((u64)&sf->fpu_state, &sf->fpu_save); + __siginfo_fpu_t __user *fp = tail; + tail += sizeof(*fp); + err |= save_fpu_state(regs, fp); + err |= __put_user((u64)fp, &sf->fpu_save); } else { err |= __put_user(0, &sf->fpu_save); } + if (wsaved) { + __siginfo_rwin_t __user *rwp = tail; + tail += sizeof(*rwp); + err |= save_rwin_state(wsaved, rwp); + err |= __put_user((u64)rwp, &sf->rwin_save); + set_thread_wsaved(0); + } else { + err |= __put_user(0, &sf->rwin_save); + } /* Update the siginfo structure. */ err |= copy_siginfo_to_user32(&sf->info, info); @@ -703,9 +717,21 @@ static int setup_rt_frame32(struct k_sigaction *ka, struct pt_regs *regs, } err |= __copy_to_user(&sf->mask, &seta, sizeof(compat_sigset_t)); - err |= copy_in_user((u32 __user *)sf, - (u32 __user *)(regs->u_regs[UREG_FP]), - sizeof(struct reg_window32)); + if (!wsaved) { + err |= copy_in_user((u32 __user *)sf, + (u32 __user *)(regs->u_regs[UREG_FP]), + sizeof(struct reg_window32)); + } else { + struct reg_window *rp; + + rp = ¤t_thread_info()->reg_window[wsaved - 1]; + for (i = 0; i < 8; i++) + err |= __put_user(rp->locals[i], &sf->ss.locals[i]); + for (i = 0; i < 6; i++) + err |= __put_user(rp->ins[i], &sf->ss.ins[i]); + err |= __put_user(rp->ins[6], &sf->ss.fp); + err |= __put_user(rp->ins[7], &sf->ss.callers_pc); + } if (err) goto sigsegv; diff --git a/arch/sparc/kernel/signal_32.c b/arch/sparc/kernel/signal_32.c index 5e5c5fd0378..04ede8f04ad 100644 --- a/arch/sparc/kernel/signal_32.c +++ b/arch/sparc/kernel/signal_32.c @@ -26,6 +26,8 @@ #include <asm/pgtable.h> #include <asm/cacheflush.h> /* flush_sig_insns */ +#include "sigutil.h" + #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) extern void fpsave(unsigned long *fpregs, unsigned long *fsr, @@ -39,8 +41,8 @@ struct signal_frame { unsigned long insns[2] __attribute__ ((aligned (8))); unsigned int extramask[_NSIG_WORDS - 1]; unsigned int extra_size; /* Should be 0 */ - __siginfo_fpu_t fpu_state; -}; + __siginfo_rwin_t __user *rwin_save; +} __attribute__((aligned(8))); struct rt_signal_frame { struct sparc_stackf ss; @@ -51,8 +53,8 @@ struct rt_signal_frame { unsigned int insns[2]; stack_t stack; unsigned int extra_size; /* Should be 0 */ - __siginfo_fpu_t fpu_state; -}; + __siginfo_rwin_t __user *rwin_save; +} __attribute__((aligned(8))); /* Align macros */ #define SF_ALIGNEDSZ (((sizeof(struct signal_frame) + 7) & (~7))) @@ -79,43 +81,13 @@ asmlinkage int sys_sigsuspend(old_sigset_t set) return _sigpause_common(set); } -static inline int -restore_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu) -{ - int err; -#ifdef CONFIG_SMP - if (test_tsk_thread_flag(current, TIF_USEDFPU)) - regs->psr &= ~PSR_EF; -#else - if (current == last_task_used_math) { - last_task_used_math = NULL; - regs->psr &= ~PSR_EF; - } -#endif - set_used_math(); - clear_tsk_thread_flag(current, TIF_USEDFPU); - - if (!access_ok(VERIFY_READ, fpu, sizeof(*fpu))) - return -EFAULT; - - err = __copy_from_user(¤t->thread.float_regs[0], &fpu->si_float_regs[0], - (sizeof(unsigned long) * 32)); - err |= __get_user(current->thread.fsr, &fpu->si_fsr); - err |= __get_user(current->thread.fpqdepth, &fpu->si_fpqdepth); - if (current->thread.fpqdepth != 0) - err |= __copy_from_user(¤t->thread.fpqueue[0], - &fpu->si_fpqueue[0], - ((sizeof(unsigned long) + - (sizeof(unsigned long *)))*16)); - return err; -} - asmlinkage void do_sigreturn(struct pt_regs *regs) { struct signal_frame __user *sf; unsigned long up_psr, pc, npc; sigset_t set; __siginfo_fpu_t __user *fpu_save; + __siginfo_rwin_t __user *rwin_save; int err; /* Always make any pending restarted system calls return -EINTR */ @@ -150,9 +122,11 @@ asmlinkage void do_sigreturn(struct pt_regs *regs) pt_regs_clear_syscall(regs); err |= __get_user(fpu_save, &sf->fpu_save); - if (fpu_save) err |= restore_fpu_state(regs, fpu_save); + err |= __get_user(rwin_save, &sf->rwin_save); + if (rwin_save) + err |= restore_rwin_state(rwin_save); /* This is pretty much atomic, no amount locking would prevent * the races which exist anyways. @@ -180,6 +154,7 @@ asmlinkage void do_rt_sigreturn(struct pt_regs *regs) struct rt_signal_frame __user *sf; unsigned int psr, pc, npc; __siginfo_fpu_t __user *fpu_save; + __siginfo_rwin_t __user *rwin_save; mm_segment_t old_fs; sigset_t set; stack_t st; @@ -207,8 +182,7 @@ asmlinkage void do_rt_sigreturn(struct pt_regs *regs) pt_regs_clear_syscall(regs); err |= __get_user(fpu_save, &sf->fpu_save); - - if (fpu_save) + if (!err && fpu_save) err |= restore_fpu_state(regs, fpu_save); err |= __copy_from_user(&set, &sf->mask, sizeof(sigset_t)); @@ -228,6 +202,12 @@ asmlinkage void do_rt_sigreturn(struct pt_regs *regs) do_sigaltstack((const stack_t __user *) &st, NULL, (unsigned long)sf); set_fs(old_fs); + err |= __get_user(rwin_save, &sf->rwin_save); + if (!err && rwin_save) { + if (restore_rwin_state(rwin_save)) + goto segv; + } + sigdelsetmask(&set, ~_BLOCKABLE); spin_lock_irq(¤t->sighand->siglock); current->blocked = set; @@ -280,53 +260,23 @@ static inline void __user *get_sigframe(struct sigaction *sa, struct pt_regs *re return (void __user *) sp; } -static inline int -save_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu) -{ - int err = 0; -#ifdef CONFIG_SMP - if (test_tsk_thread_flag(current, TIF_USEDFPU)) { - put_psr(get_psr() | PSR_EF); - fpsave(¤t->thread.float_regs[0], ¤t->thread.fsr, - ¤t->thread.fpqueue[0], ¤t->thread.fpqdepth); - regs->psr &= ~(PSR_EF); - clear_tsk_thread_flag(current, TIF_USEDFPU); - } -#else - if (current == last_task_used_math) { - put_psr(get_psr() | PSR_EF); - fpsave(¤t->thread.float_regs[0], ¤t->thread.fsr, - ¤t->thread.fpqueue[0], ¤t->thread.fpqdepth); - last_task_used_math = NULL; - regs->psr &= ~(PSR_EF); - } -#endif - err |= __copy_to_user(&fpu->si_float_regs[0], - ¤t->thread.float_regs[0], - (sizeof(unsigned long) * 32)); - err |= __put_user(current->thread.fsr, &fpu->si_fsr); - err |= __put_user(current->thread.fpqdepth, &fpu->si_fpqdepth); - if (current->thread.fpqdepth != 0) - err |= __copy_to_user(&fpu->si_fpqueue[0], - ¤t->thread.fpqueue[0], - ((sizeof(unsigned long) + - (sizeof(unsigned long *)))*16)); - clear_used_math(); - return err; -} - static int setup_frame(struct k_sigaction *ka, struct pt_regs *regs, int signo, sigset_t *oldset) { struct signal_frame __user *sf; - int sigframe_size, err; + int sigframe_size, err, wsaved; + void __user *tail; /* 1. Make sure everything is clean */ synchronize_user_stack(); - sigframe_size = SF_ALIGNEDSZ; - if (!used_math()) - sigframe_size -= sizeof(__siginfo_fpu_t); + wsaved = current_thread_info()->w_saved; + + sigframe_size = sizeof(*sf); + if (used_math()) + sigframe_size += sizeof(__siginfo_fpu_t); + if (wsaved) + sigframe_size += sizeof(__siginfo_rwin_t); sf = (struct signal_frame __user *) get_sigframe(&ka->sa, regs, sigframe_size); @@ -334,8 +284,7 @@ static int setup_frame(struct k_sigaction *ka, struct pt_regs *regs, if (invalid_frame_pointer(sf, sigframe_size)) goto sigill_and_return; - if (current_thread_info()->w_saved != 0) - goto sigill_and_return; + tail = sf + 1; /* 2. Save the current process state */ err = __copy_to_user(&sf->info.si_regs, regs, sizeof(struct pt_regs)); @@ -343,17 +292,34 @@ static int setup_frame(struct k_sigaction *ka, struct pt_regs *regs, err |= __put_user(0, &sf->extra_size); if (used_math()) { - err |= save_fpu_state(regs, &sf->fpu_state); - err |= __put_user(&sf->fpu_state, &sf->fpu_save); + __siginfo_fpu_t __user *fp = tail; + tail += sizeof(*fp); + err |= save_fpu_state(regs, fp); + err |= __put_user(fp, &sf->fpu_save); } else { err |= __put_user(0, &sf->fpu_save); } + if (wsaved) { + __siginfo_rwin_t __user *rwp = tail; + tail += sizeof(*rwp); + err |= save_rwin_state(wsaved, rwp); + err |= __put_user(rwp, &sf->rwin_save); + } else { + err |= __put_user(0, &sf->rwin_save); + } err |= __put_user(oldset->sig[0], &sf->info.si_mask); err |= __copy_to_user(sf->extramask, &oldset->sig[1], (_NSIG_WORDS - 1) * sizeof(unsigned int)); - err |= __copy_to_user(sf, (char *) regs->u_regs[UREG_FP], - sizeof(struct reg_window32)); + if (!wsaved) { + err |= __copy_to_user(sf, (char *) regs->u_regs[UREG_FP], + sizeof(struct reg_window32)); + } else { + struct reg_window32 *rp; + + rp = ¤t_thread_info()->reg_window[wsaved - 1]; + err |= __copy_to_user(sf, rp, sizeof(struct reg_window32)); + } if (err) goto sigsegv; @@ -399,21 +365,24 @@ static int setup_rt_frame(struct k_sigaction *ka, struct pt_regs *regs, int signo, sigset_t *oldset, siginfo_t *info) { struct rt_signal_frame __user *sf; - int sigframe_size; + int sigframe_size, wsaved; + void __user *tail; unsigned int psr; int err; synchronize_user_stack(); - sigframe_size = RT_ALIGNEDSZ; - if (!used_math()) - sigframe_size -= sizeof(__siginfo_fpu_t); + wsaved = current_thread_info()->w_saved; + sigframe_size = sizeof(*sf); + if (used_math()) + sigframe_size += sizeof(__siginfo_fpu_t); + if (wsaved) + sigframe_size += sizeof(__siginfo_rwin_t); sf = (struct rt_signal_frame __user *) get_sigframe(&ka->sa, regs, sigframe_size); if (invalid_frame_pointer(sf, sigframe_size)) goto sigill; - if (current_thread_info()->w_saved != 0) - goto sigill; + tail = sf + 1; err = __put_user(regs->pc, &sf->regs.pc); err |= __put_user(regs->npc, &sf->regs.npc); err |= __put_user(regs->y, &sf->regs.y); @@ -425,11 +394,21 @@ static int setup_rt_frame(struct k_sigaction *ka, struct pt_regs *regs, err |= __put_user(0, &sf->extra_size); if (psr & PSR_EF) { - err |= save_fpu_state(regs, &sf->fpu_state); - err |= __put_user(&sf->fpu_state, &sf->fpu_save); + __siginfo_fpu_t *fp = tail; + tail += sizeof(*fp); + err |= save_fpu_state(regs, fp); + err |= __put_user(fp, &sf->fpu_save); } else { err |= __put_user(0, &sf->fpu_save); } + if (wsaved) { + __siginfo_rwin_t *rwp = tail; + tail += sizeof(*rwp); + err |= save_rwin_state(wsaved, rwp); + err |= __put_user(rwp, &sf->rwin_save); + } else { + err |= __put_user(0, &sf->rwin_save); + } err |= __copy_to_user(&sf->mask, &oldset->sig[0], sizeof(sigset_t)); /* Setup sigaltstack */ @@ -437,8 +416,15 @@ static int setup_rt_frame(struct k_sigaction *ka, struct pt_regs *regs, err |= __put_user(sas_ss_flags(regs->u_regs[UREG_FP]), &sf->stack.ss_flags); err |= __put_user(current->sas_ss_size, &sf->stack.ss_size); - err |= __copy_to_user(sf, (char *) regs->u_regs[UREG_FP], - sizeof(struct reg_window32)); + if (!wsaved) { + err |= __copy_to_user(sf, (char *) regs->u_regs[UREG_FP], + sizeof(struct reg_window32)); + } else { + struct reg_window32 *rp; + + rp = ¤t_thread_info()->reg_window[wsaved - 1]; + err |= __copy_to_user(sf, rp, sizeof(struct reg_window32)); + } err |= copy_siginfo_to_user(&sf->info, info); diff --git a/arch/sparc/kernel/signal_64.c b/arch/sparc/kernel/signal_64.c index 006fe451588..47509df3b89 100644 --- a/arch/sparc/kernel/signal_64.c +++ b/arch/sparc/kernel/signal_64.c @@ -34,6 +34,7 @@ #include "entry.h" #include "systbls.h" +#include "sigutil.h" #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) @@ -236,7 +237,7 @@ struct rt_signal_frame { __siginfo_fpu_t __user *fpu_save; stack_t stack; sigset_t mask; - __siginfo_fpu_t fpu_state; + __siginfo_rwin_t *rwin_save; }; static long _sigpause_common(old_sigset_t set) @@ -266,33 +267,12 @@ asmlinkage long sys_sigsuspend(old_sigset_t set) return _sigpause_common(set); } -static inline int -restore_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu) -{ - unsigned long *fpregs = current_thread_info()->fpregs; - unsigned long fprs; - int err; - - err = __get_user(fprs, &fpu->si_fprs); - fprs_write(0); - regs->tstate &= ~TSTATE_PEF; - if (fprs & FPRS_DL) - err |= copy_from_user(fpregs, &fpu->si_float_regs[0], - (sizeof(unsigned int) * 32)); - if (fprs & FPRS_DU) - err |= copy_from_user(fpregs+16, &fpu->si_float_regs[32], - (sizeof(unsigned int) * 32)); - err |= __get_user(current_thread_info()->xfsr[0], &fpu->si_fsr); - err |= __get_user(current_thread_info()->gsr[0], &fpu->si_gsr); - current_thread_info()->fpsaved[0] |= fprs; - return err; -} - void do_rt_sigreturn(struct pt_regs *regs) { struct rt_signal_frame __user *sf; unsigned long tpc, tnpc, tstate; __siginfo_fpu_t __user *fpu_save; + __siginfo_rwin_t __user *rwin_save; sigset_t set; int err; @@ -325,8 +305,8 @@ void do_rt_sigreturn(struct pt_regs *regs) regs->tstate |= (tstate & (TSTATE_ASI | TSTATE_ICC | TSTATE_XCC)); err |= __get_user(fpu_save, &sf->fpu_save); - if (fpu_save) - err |= restore_fpu_state(regs, &sf->fpu_state); + if (!err && fpu_save) + err |= restore_fpu_state(regs, fpu_save); err |= __copy_from_user(&set, &sf->mask, sizeof(sigset_t)); err |= do_sigaltstack(&sf->stack, NULL, (unsigned long)sf); @@ -334,6 +314,12 @@ void do_rt_sigreturn(struct pt_regs *regs) if (err) goto segv; + err |= __get_user(rwin_save, &sf->rwin_save); + if (!err && rwin_save) { + if (restore_rwin_state(rwin_save)) + goto segv; + } + regs->tpc = tpc; regs->tnpc = tnpc; @@ -351,34 +337,13 @@ segv: } /* Checks if the fp is valid */ -static int invalid_frame_pointer(void __user *fp, int fplen) +static int invalid_frame_pointer(void __user *fp) { if (((unsigned long) fp) & 15) return 1; return 0; } -static inline int -save_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu) -{ - unsigned long *fpregs = current_thread_info()->fpregs; - unsigned long fprs; - int err = 0; - - fprs = current_thread_info()->fpsaved[0]; - if (fprs & FPRS_DL) - err |= copy_to_user(&fpu->si_float_regs[0], fpregs, - (sizeof(unsigned int) * 32)); - if (fprs & FPRS_DU) - err |= copy_to_user(&fpu->si_float_regs[32], fpregs+16, - (sizeof(unsigned int) * 32)); - err |= __put_user(current_thread_info()->xfsr[0], &fpu->si_fsr); - err |= __put_user(current_thread_info()->gsr[0], &fpu->si_gsr); - err |= __put_user(fprs, &fpu->si_fprs); - - return err; -} - static inline void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, unsigned long framesize) { unsigned long sp = regs->u_regs[UREG_FP] + STACK_BIAS; @@ -414,34 +379,48 @@ setup_rt_frame(struct k_sigaction *ka, struct pt_regs *regs, int signo, sigset_t *oldset, siginfo_t *info) { struct rt_signal_frame __user *sf; - int sigframe_size, err; + int wsaved, err, sf_size; + void __user *tail; /* 1. Make sure everything is clean */ synchronize_user_stack(); save_and_clear_fpu(); - sigframe_size = sizeof(struct rt_signal_frame); - if (!(current_thread_info()->fpsaved[0] & FPRS_FEF)) - sigframe_size -= sizeof(__siginfo_fpu_t); + wsaved = get_thread_wsaved(); + sf_size = sizeof(struct rt_signal_frame); + if (current_thread_info()->fpsaved[0] & FPRS_FEF) + sf_size += sizeof(__siginfo_fpu_t); + if (wsaved) + sf_size += sizeof(__siginfo_rwin_t); sf = (struct rt_signal_frame __user *) - get_sigframe(ka, regs, sigframe_size); - - if (invalid_frame_pointer (sf, sigframe_size)) - goto sigill; + get_sigframe(ka, regs, sf_size); - if (get_thread_wsaved() != 0) + if (invalid_frame_pointer (sf)) goto sigill; + tail = (sf + 1); + /* 2. Save the current process state */ err = copy_to_user(&sf->regs, regs, sizeof (*regs)); if (current_thread_info()->fpsaved[0] & FPRS_FEF) { - err |= save_fpu_state(regs, &sf->fpu_state); - err |= __put_user((u64)&sf->fpu_state, &sf->fpu_save); + __siginfo_fpu_t __user *fpu_save = tail; + tail += sizeof(__siginfo_fpu_t); + err |= save_fpu_state(regs, fpu_save); + err |= __put_user((u64)fpu_save, &sf->fpu_save); } else { err |= __put_user(0, &sf->fpu_save); } + if (wsaved) { + __siginfo_rwin_t __user *rwin_save = tail; + tail += sizeof(__siginfo_rwin_t); + err |= save_rwin_state(wsaved, rwin_save); + err |= __put_user((u64)rwin_save, &sf->rwin_save); + set_thread_wsaved(0); + } else { + err |= __put_user(0, &sf->rwin_save); + } /* Setup sigaltstack */ err |= __put_user(current->sas_ss_sp, &sf->stack.ss_sp); @@ -450,10 +429,17 @@ setup_rt_frame(struct k_sigaction *ka, struct pt_regs *regs, err |= copy_to_user(&sf->mask, oldset, sizeof(sigset_t)); - err |= copy_in_user((u64 __user *)sf, - (u64 __user *)(regs->u_regs[UREG_FP]+STACK_BIAS), - sizeof(struct reg_window)); + if (!wsaved) { + err |= copy_in_user((u64 __user *)sf, + (u64 __user *)(regs->u_regs[UREG_FP] + + STACK_BIAS), + sizeof(struct reg_window)); + } else { + struct reg_window *rp; + rp = ¤t_thread_info()->reg_window[wsaved - 1]; + err |= copy_to_user(sf, rp, sizeof(struct reg_window)); + } if (info) err |= copy_siginfo_to_user(&sf->info, info); else { diff --git a/arch/sparc/kernel/sigutil.h b/arch/sparc/kernel/sigutil.h new file mode 100644 index 00000000000..d223aa432bb --- /dev/null +++ b/arch/sparc/kernel/sigutil.h @@ -0,0 +1,9 @@ +#ifndef _SIGUTIL_H +#define _SIGUTIL_H + +int save_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu); +int restore_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu); +int save_rwin_state(int wsaved, __siginfo_rwin_t __user *rwin); +int restore_rwin_state(__siginfo_rwin_t __user *rp); + +#endif /* _SIGUTIL_H */ diff --git a/arch/sparc/kernel/sigutil_32.c b/arch/sparc/kernel/sigutil_32.c new file mode 100644 index 00000000000..35c7897b009 --- /dev/null +++ b/arch/sparc/kernel/sigutil_32.c @@ -0,0 +1,120 @@ +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/thread_info.h> +#include <linux/uaccess.h> +#include <linux/sched.h> + +#include <asm/sigcontext.h> +#include <asm/fpumacro.h> +#include <asm/ptrace.h> + +#include "sigutil.h" + +int save_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu) +{ + int err = 0; +#ifdef CONFIG_SMP + if (test_tsk_thread_flag(current, TIF_USEDFPU)) { + put_psr(get_psr() | PSR_EF); + fpsave(¤t->thread.float_regs[0], ¤t->thread.fsr, + ¤t->thread.fpqueue[0], ¤t->thread.fpqdepth); + regs->psr &= ~(PSR_EF); + clear_tsk_thread_flag(current, TIF_USEDFPU); + } +#else + if (current == last_task_used_math) { + put_psr(get_psr() | PSR_EF); + fpsave(¤t->thread.float_regs[0], ¤t->thread.fsr, + ¤t->thread.fpqueue[0], ¤t->thread.fpqdepth); + last_task_used_math = NULL; + regs->psr &= ~(PSR_EF); + } +#endif + err |= __copy_to_user(&fpu->si_float_regs[0], + ¤t->thread.float_regs[0], + (sizeof(unsigned long) * 32)); + err |= __put_user(current->thread.fsr, &fpu->si_fsr); + err |= __put_user(current->thread.fpqdepth, &fpu->si_fpqdepth); + if (current->thread.fpqdepth != 0) + err |= __copy_to_user(&fpu->si_fpqueue[0], + ¤t->thread.fpqueue[0], + ((sizeof(unsigned long) + + (sizeof(unsigned long *)))*16)); + clear_used_math(); + return err; +} + +int restore_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu) +{ + int err; +#ifdef CONFIG_SMP + if (test_tsk_thread_flag(current, TIF_USEDFPU)) + regs->psr &= ~PSR_EF; +#else + if (current == last_task_used_math) { + last_task_used_math = NULL; + regs->psr &= ~PSR_EF; + } +#endif + set_used_math(); + clear_tsk_thread_flag(current, TIF_USEDFPU); + + if (!access_ok(VERIFY_READ, fpu, sizeof(*fpu))) + return -EFAULT; + + err = __copy_from_user(¤t->thread.float_regs[0], &fpu->si_float_regs[0], + (sizeof(unsigned long) * 32)); + err |= __get_user(current->thread.fsr, &fpu->si_fsr); + err |= __get_user(current->thread.fpqdepth, &fpu->si_fpqdepth); + if (current->thread.fpqdepth != 0) + err |= __copy_from_user(¤t->thread.fpqueue[0], + &fpu->si_fpqueue[0], + ((sizeof(unsigned long) + + (sizeof(unsigned long *)))*16)); + return err; +} + +int save_rwin_state(int wsaved, __siginfo_rwin_t __user *rwin) +{ + int i, err = __put_user(wsaved, &rwin->wsaved); + + for (i = 0; i < wsaved; i++) { + struct reg_window32 *rp; + unsigned long fp; + + rp = ¤t_thread_info()->reg_window[i]; + fp = current_thread_info()->rwbuf_stkptrs[i]; + err |= copy_to_user(&rwin->reg_window[i], rp, + sizeof(struct reg_window32)); + err |= __put_user(fp, &rwin->rwbuf_stkptrs[i]); + } + return err; +} + +int restore_rwin_state(__siginfo_rwin_t __user *rp) +{ + struct thread_info *t = current_thread_info(); + int i, wsaved, err; + + __get_user(wsaved, &rp->wsaved); + if (wsaved > NSWINS) + return -EFAULT; + + err = 0; + for (i = 0; i < wsaved; i++) { + err |= copy_from_user(&t->reg_window[i], + &rp->reg_window[i], + sizeof(struct reg_window32)); + err |= __get_user(t->rwbuf_stkptrs[i], + &rp->rwbuf_stkptrs[i]); + } + if (err) + return err; + + t->w_saved = wsaved; + synchronize_user_stack(); + if (t->w_saved) + return -EFAULT; + return 0; + +} diff --git a/arch/sparc/kernel/sigutil_64.c b/arch/sparc/kernel/sigutil_64.c new file mode 100644 index 00000000000..e7dc508c38e --- /dev/null +++ b/arch/sparc/kernel/sigutil_64.c @@ -0,0 +1,93 @@ +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/thread_info.h> +#include <linux/uaccess.h> + +#include <asm/sigcontext.h> +#include <asm/fpumacro.h> +#include <asm/ptrace.h> + +#include "sigutil.h" + +int save_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu) +{ + unsigned long *fpregs = current_thread_info()->fpregs; + unsigned long fprs; + int err = 0; + + fprs = current_thread_info()->fpsaved[0]; + if (fprs & FPRS_DL) + err |= copy_to_user(&fpu->si_float_regs[0], fpregs, + (sizeof(unsigned int) * 32)); + if (fprs & FPRS_DU) + err |= copy_to_user(&fpu->si_float_regs[32], fpregs+16, + (sizeof(unsigned int) * 32)); + err |= __put_user(current_thread_info()->xfsr[0], &fpu->si_fsr); + err |= __put_user(current_thread_info()->gsr[0], &fpu->si_gsr); + err |= __put_user(fprs, &fpu->si_fprs); + + return err; +} + +int restore_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu) +{ + unsigned long *fpregs = current_thread_info()->fpregs; + unsigned long fprs; + int err; + + err = __get_user(fprs, &fpu->si_fprs); + fprs_write(0); + regs->tstate &= ~TSTATE_PEF; + if (fprs & FPRS_DL) + err |= copy_from_user(fpregs, &fpu->si_float_regs[0], + (sizeof(unsigned int) * 32)); + if (fprs & FPRS_DU) + err |= copy_from_user(fpregs+16, &fpu->si_float_regs[32], + (sizeof(unsigned int) * 32)); + err |= __get_user(current_thread_info()->xfsr[0], &fpu->si_fsr); + err |= __get_user(current_thread_info()->gsr[0], &fpu->si_gsr); + current_thread_info()->fpsaved[0] |= fprs; + return err; +} + +int save_rwin_state(int wsaved, __siginfo_rwin_t __user *rwin) +{ + int i, err = __put_user(wsaved, &rwin->wsaved); + + for (i = 0; i < wsaved; i++) { + struct reg_window *rp = ¤t_thread_info()->reg_window[i]; + unsigned long fp = current_thread_info()->rwbuf_stkptrs[i]; + + err |= copy_to_user(&rwin->reg_window[i], rp, + sizeof(struct reg_window)); + err |= __put_user(fp, &rwin->rwbuf_stkptrs[i]); + } + return err; +} + +int restore_rwin_state(__siginfo_rwin_t __user *rp) +{ + struct thread_info *t = current_thread_info(); + int i, wsaved, err; + + __get_user(wsaved, &rp->wsaved); + if (wsaved > NSWINS) + return -EFAULT; + + err = 0; + for (i = 0; i < wsaved; i++) { + err |= copy_from_user(&t->reg_window[i], + &rp->reg_window[i], + sizeof(struct reg_window)); + err |= __get_user(t->rwbuf_stkptrs[i], + &rp->rwbuf_stkptrs[i]); + } + if (err) + return err; + + set_thread_wsaved(wsaved); + synchronize_user_stack(); + if (get_thread_wsaved()) + return -EFAULT; + return 0; +} diff --git a/arch/sparc/kernel/sys32.S b/arch/sparc/kernel/sys32.S index 44e5faf1ad5..d97f3eb72e0 100644 --- a/arch/sparc/kernel/sys32.S +++ b/arch/sparc/kernel/sys32.S @@ -81,7 +81,6 @@ SIGN2(sys32_fadvise64, compat_sys_fadvise64, %o0, %o4) SIGN2(sys32_fadvise64_64, compat_sys_fadvise64_64, %o0, %o5) SIGN2(sys32_bdflush, sys_bdflush, %o0, %o1) SIGN1(sys32_mlockall, sys_mlockall, %o0) -SIGN1(sys32_nfsservctl, compat_sys_nfsservctl, %o0) SIGN1(sys32_clock_nanosleep, compat_sys_clock_nanosleep, %o1) SIGN1(sys32_timer_settime, compat_sys_timer_settime, %o1) SIGN1(sys32_io_submit, compat_sys_io_submit, %o1) diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S index 6e492d59f6b..09d8ec45445 100644 --- a/arch/sparc/kernel/systbls_32.S +++ b/arch/sparc/kernel/systbls_32.S @@ -67,7 +67,7 @@ sys_call_table: /*235*/ .long sys_fstatfs64, sys_llseek, sys_mlock, sys_munlock, sys_mlockall /*240*/ .long sys_munlockall, sys_sched_setparam, sys_sched_getparam, sys_sched_setscheduler, sys_sched_getscheduler /*245*/ .long sys_sched_yield, sys_sched_get_priority_max, sys_sched_get_priority_min, sys_sched_rr_get_interval, sys_nanosleep -/*250*/ .long sys_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_nfsservctl +/*250*/ .long sys_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_ni_syscall /*255*/ .long sys_sync_file_range, sys_clock_settime, sys_clock_gettime, sys_clock_getres, sys_clock_nanosleep /*260*/ .long sys_sched_getaffinity, sys_sched_setaffinity, sys_timer_settime, sys_timer_gettime, sys_timer_getoverrun /*265*/ .long sys_timer_delete, sys_timer_create, sys_nis_syscall, sys_io_setup, sys_io_destroy diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S index f566518483b..edbec45d468 100644 --- a/arch/sparc/kernel/systbls_64.S +++ b/arch/sparc/kernel/systbls_64.S @@ -68,7 +68,7 @@ sys_call_table32: .word compat_sys_fstatfs64, sys_llseek, sys_mlock, sys_munlock, sys32_mlockall /*240*/ .word sys_munlockall, sys32_sched_setparam, sys32_sched_getparam, sys32_sched_setscheduler, sys32_sched_getscheduler .word sys_sched_yield, sys32_sched_get_priority_max, sys32_sched_get_priority_min, sys32_sched_rr_get_interval, compat_sys_nanosleep -/*250*/ .word sys_mremap, compat_sys_sysctl, sys32_getsid, sys_fdatasync, sys32_nfsservctl +/*250*/ .word sys_mremap, compat_sys_sysctl, sys32_getsid, sys_fdatasync, sys_nis_syscall .word sys32_sync_file_range, compat_sys_clock_settime, compat_sys_clock_gettime, compat_sys_clock_getres, sys32_clock_nanosleep /*260*/ .word compat_sys_sched_getaffinity, compat_sys_sched_setaffinity, sys32_timer_settime, compat_sys_timer_gettime, sys_timer_getoverrun .word sys_timer_delete, compat_sys_timer_create, sys_ni_syscall, compat_sys_io_setup, sys_io_destroy @@ -145,7 +145,7 @@ sys_call_table: .word sys_fstatfs64, sys_llseek, sys_mlock, sys_munlock, sys_mlockall /*240*/ .word sys_munlockall, sys_sched_setparam, sys_sched_getparam, sys_sched_setscheduler, sys_sched_getscheduler .word sys_sched_yield, sys_sched_get_priority_max, sys_sched_get_priority_min, sys_sched_rr_get_interval, sys_nanosleep -/*250*/ .word sys_64_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_nfsservctl +/*250*/ .word sys_64_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_nis_syscall .word sys_sync_file_range, sys_clock_settime, sys_clock_gettime, sys_clock_getres, sys_clock_nanosleep /*260*/ .word sys_sched_getaffinity, sys_sched_setaffinity, sys_timer_settime, sys_timer_gettime, sys_timer_getoverrun .word sys_timer_delete, sys_timer_create, sys_ni_syscall, sys_io_setup, sys_io_destroy diff --git a/arch/um/Kconfig.x86 b/arch/um/Kconfig.x86 index d31ecf346b4..21bebe63df6 100644 --- a/arch/um/Kconfig.x86 +++ b/arch/um/Kconfig.x86 @@ -10,6 +10,10 @@ config CMPXCHG_LOCAL bool default n +config CMPXCHG_DOUBLE + bool + default n + source "arch/x86/Kconfig.cpu" endmenu diff --git a/arch/um/Makefile b/arch/um/Makefile index fab8121d2b3..c0f712cc7c5 100644 --- a/arch/um/Makefile +++ b/arch/um/Makefile @@ -41,7 +41,7 @@ KBUILD_CPPFLAGS += -I$(srctree)/$(ARCH_DIR)/sys-$(SUBARCH) KBUILD_CFLAGS += $(CFLAGS) $(CFLAGS-y) -D__arch_um__ -DSUBARCH=\"$(SUBARCH)\" \ $(ARCH_INCLUDE) $(MODE_INCLUDE) -Dvmap=kernel_vmap \ -Din6addr_loopback=kernel_in6addr_loopback \ - -Din6addr_any=kernel_in6addr_any + -Din6addr_any=kernel_in6addr_any -Dstrrchr=kernel_strrchr KBUILD_AFLAGS += $(ARCH_INCLUDE) diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c index d51c404239a..364c8a15c4c 100644 --- a/arch/um/drivers/line.c +++ b/arch/um/drivers/line.c @@ -399,8 +399,8 @@ int line_setup_irq(int fd, int input, int output, struct line *line, void *data) * is done under a spinlock. Checking whether the device is in use is * line->tty->count > 1, also under the spinlock. * - * tty->count serves to decide whether the device should be enabled or - * disabled on the host. If it's equal to 1, then we are doing the + * line->count serves to decide whether the device should be enabled or + * disabled on the host. If it's equal to 0, then we are doing the * first open or last close. Otherwise, open and close just return. */ @@ -414,16 +414,16 @@ int line_open(struct line *lines, struct tty_struct *tty) goto out_unlock; err = 0; - if (tty->count > 1) + if (line->count++) goto out_unlock; - spin_unlock(&line->count_lock); - + BUG_ON(tty->driver_data); tty->driver_data = line; line->tty = tty; + spin_unlock(&line->count_lock); err = enable_chan(line); - if (err) + if (err) /* line_close() will be called by our caller */ return err; INIT_DELAYED_WORK(&line->task, line_timer_cb); @@ -436,7 +436,7 @@ int line_open(struct line *lines, struct tty_struct *tty) chan_window_size(&line->chan_list, &tty->winsize.ws_row, &tty->winsize.ws_col); - return err; + return 0; out_unlock: spin_unlock(&line->count_lock); @@ -460,17 +460,16 @@ void line_close(struct tty_struct *tty, struct file * filp) flush_buffer(line); spin_lock(&line->count_lock); - if (!line->valid) - goto out_unlock; + BUG_ON(!line->valid); - if (tty->count > 1) + if (--line->count) goto out_unlock; - spin_unlock(&line->count_lock); - line->tty = NULL; tty->driver_data = NULL; + spin_unlock(&line->count_lock); + if (line->sigio) { unregister_winch(tty); line->sigio = 0; @@ -498,7 +497,7 @@ static int setup_one_line(struct line *lines, int n, char *init, int init_prio, spin_lock(&line->count_lock); - if (line->tty != NULL) { + if (line->count) { *error_out = "Device is already open"; goto out; } @@ -722,41 +721,53 @@ struct winch { int pid; struct tty_struct *tty; unsigned long stack; + struct work_struct work; }; -static void free_winch(struct winch *winch, int free_irq_ok) +static void __free_winch(struct work_struct *work) { - if (free_irq_ok) - free_irq(WINCH_IRQ, winch); - - list_del(&winch->list); + struct winch *winch = container_of(work, struct winch, work); + free_irq(WINCH_IRQ, winch); if (winch->pid != -1) os_kill_process(winch->pid, 1); - if (winch->fd != -1) - os_close_file(winch->fd); if (winch->stack != 0) free_stack(winch->stack, 0); kfree(winch); } +static void free_winch(struct winch *winch) +{ + int fd = winch->fd; + winch->fd = -1; + if (fd != -1) + os_close_file(fd); + list_del(&winch->list); + __free_winch(&winch->work); +} + static irqreturn_t winch_interrupt(int irq, void *data) { struct winch *winch = data; struct tty_struct *tty; struct line *line; + int fd = winch->fd; int err; char c; - if (winch->fd != -1) { - err = generic_read(winch->fd, &c, NULL); + if (fd != -1) { + err = generic_read(fd, &c, NULL); if (err < 0) { if (err != -EAGAIN) { + winch->fd = -1; + list_del(&winch->list); + os_close_file(fd); printk(KERN_ERR "winch_interrupt : " "read failed, errno = %d\n", -err); printk(KERN_ERR "fd %d is losing SIGWINCH " "support\n", winch->tty_fd); - free_winch(winch, 0); + INIT_WORK(&winch->work, __free_winch); + schedule_work(&winch->work); return IRQ_HANDLED; } goto out; @@ -828,7 +839,7 @@ static void unregister_winch(struct tty_struct *tty) list_for_each_safe(ele, next, &winch_handlers) { winch = list_entry(ele, struct winch, list); if (winch->tty == tty) { - free_winch(winch, 1); + free_winch(winch); break; } } @@ -844,7 +855,7 @@ static void winch_cleanup(void) list_for_each_safe(ele, next, &winch_handlers) { winch = list_entry(ele, struct winch, list); - free_winch(winch, 1); + free_winch(winch); } spin_unlock(&winch_handler_lock); diff --git a/arch/um/drivers/xterm.c b/arch/um/drivers/xterm.c index 8ac7146c237..2e1de572860 100644 --- a/arch/um/drivers/xterm.c +++ b/arch/um/drivers/xterm.c @@ -123,6 +123,7 @@ static int xterm_open(int input, int output, int primary, void *d, err = -errno; printk(UM_KERN_ERR "xterm_open : unlink failed, errno = %d\n", errno); + close(fd); return err; } close(fd); diff --git a/arch/um/include/asm/ptrace-generic.h b/arch/um/include/asm/ptrace-generic.h index ae084ad1a3a..1a7d2757fe0 100644 --- a/arch/um/include/asm/ptrace-generic.h +++ b/arch/um/include/asm/ptrace-generic.h @@ -42,10 +42,6 @@ extern long subarch_ptrace(struct task_struct *child, long request, unsigned long addr, unsigned long data); extern unsigned long getreg(struct task_struct *child, int regno); extern int putreg(struct task_struct *child, int regno, unsigned long value); -extern int get_fpregs(struct user_i387_struct __user *buf, - struct task_struct *child); -extern int set_fpregs(struct user_i387_struct __user *buf, - struct task_struct *child); extern int arch_copy_tls(struct task_struct *new); extern void clear_flushed_tls(struct task_struct *task); diff --git a/arch/um/include/shared/line.h b/arch/um/include/shared/line.h index 72f4f25af24..63df3ca02ac 100644 --- a/arch/um/include/shared/line.h +++ b/arch/um/include/shared/line.h @@ -33,6 +33,7 @@ struct line_driver { struct line { struct tty_struct *tty; spinlock_t count_lock; + unsigned long count; int valid; char *init_str; diff --git a/arch/um/include/shared/registers.h b/arch/um/include/shared/registers.h index b0b4589e0eb..f1e0aa56c52 100644 --- a/arch/um/include/shared/registers.h +++ b/arch/um/include/shared/registers.h @@ -16,7 +16,7 @@ extern int restore_fpx_registers(int pid, unsigned long *fp_regs); extern int save_registers(int pid, struct uml_pt_regs *regs); extern int restore_registers(int pid, struct uml_pt_regs *regs); extern int init_registers(int pid); -extern void get_safe_registers(unsigned long *regs); +extern void get_safe_registers(unsigned long *regs, unsigned long *fp_regs); extern unsigned long get_thread_reg(int reg, jmp_buf *buf); extern int get_fp_registers(int pid, unsigned long *regs); extern int put_fp_registers(int pid, unsigned long *regs); diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c index fab4371184f..21c1ae7c3d7 100644 --- a/arch/um/kernel/process.c +++ b/arch/um/kernel/process.c @@ -202,7 +202,7 @@ int copy_thread(unsigned long clone_flags, unsigned long sp, arch_copy_thread(¤t->thread.arch, &p->thread.arch); } else { - get_safe_registers(p->thread.regs.regs.gp); + get_safe_registers(p->thread.regs.regs.gp, p->thread.regs.regs.fp); p->thread.request.u.thread = current->thread.request.u.thread; handler = new_thread_handler; } diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c index 701b672c112..c9da32b0c70 100644 --- a/arch/um/kernel/ptrace.c +++ b/arch/um/kernel/ptrace.c @@ -50,23 +50,11 @@ long arch_ptrace(struct task_struct *child, long request, void __user *vp = p; switch (request) { - /* read word at location addr. */ - case PTRACE_PEEKTEXT: - case PTRACE_PEEKDATA: - ret = generic_ptrace_peekdata(child, addr, data); - break; - /* read the word at location addr in the USER area. */ case PTRACE_PEEKUSR: ret = peek_user(child, addr, data); break; - /* write the word at location addr. */ - case PTRACE_POKETEXT: - case PTRACE_POKEDATA: - ret = generic_ptrace_pokedata(child, addr, data); - break; - /* write the word at location addr in the USER area */ case PTRACE_POKEUSR: ret = poke_user(child, addr, data); @@ -107,16 +95,6 @@ long arch_ptrace(struct task_struct *child, long request, break; } #endif -#ifdef PTRACE_GETFPREGS - case PTRACE_GETFPREGS: /* Get the child FPU state. */ - ret = get_fpregs(vp, child); - break; -#endif -#ifdef PTRACE_SETFPREGS - case PTRACE_SETFPREGS: /* Set the child FPU state. */ - ret = set_fpregs(vp, child); - break; -#endif case PTRACE_GET_THREAD_AREA: ret = ptrace_get_thread_area(child, addr, vp); break; @@ -154,12 +132,6 @@ long arch_ptrace(struct task_struct *child, long request, break; } #endif -#ifdef PTRACE_ARCH_PRCTL - case PTRACE_ARCH_PRCTL: - /* XXX Calls ptrace on the host - needs some SMP thinking */ - ret = arch_prctl(child, data, (void __user *) addr); - break; -#endif default: ret = ptrace_request(child, request, addr, data); if (ret == -EIO) diff --git a/arch/um/os-Linux/registers.c b/arch/um/os-Linux/registers.c index 830fe6a1518..b866b9e3bef 100644 --- a/arch/um/os-Linux/registers.c +++ b/arch/um/os-Linux/registers.c @@ -8,6 +8,8 @@ #include <string.h> #include <sys/ptrace.h> #include "sysdep/ptrace.h" +#include "sysdep/ptrace_user.h" +#include "registers.h" int save_registers(int pid, struct uml_pt_regs *regs) { @@ -32,6 +34,7 @@ int restore_registers(int pid, struct uml_pt_regs *regs) /* This is set once at boot time and not changed thereafter */ static unsigned long exec_regs[MAX_REG_NR]; +static unsigned long exec_fp_regs[FP_SIZE]; int init_registers(int pid) { @@ -42,10 +45,14 @@ int init_registers(int pid) return -errno; arch_init_registers(pid); + get_fp_registers(pid, exec_fp_regs); return 0; } -void get_safe_registers(unsigned long *regs) +void get_safe_registers(unsigned long *regs, unsigned long *fp_regs) { memcpy(regs, exec_regs, sizeof(exec_regs)); + + if (fp_regs) + memcpy(fp_regs, exec_fp_regs, sizeof(exec_fp_regs)); } diff --git a/arch/um/os-Linux/skas/mem.c b/arch/um/os-Linux/skas/mem.c index d261f170d12..e771398be5f 100644 --- a/arch/um/os-Linux/skas/mem.c +++ b/arch/um/os-Linux/skas/mem.c @@ -39,7 +39,7 @@ static unsigned long syscall_regs[MAX_REG_NR]; static int __init init_syscall_regs(void) { - get_safe_registers(syscall_regs); + get_safe_registers(syscall_regs, NULL); syscall_regs[REGS_IP_INDEX] = STUB_CODE + ((unsigned long) &batch_syscall_stub - (unsigned long) &__syscall_stub_start); diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c index d6e0a2234b8..dee0e8cf8ad 100644 --- a/arch/um/os-Linux/skas/process.c +++ b/arch/um/os-Linux/skas/process.c @@ -373,6 +373,9 @@ void userspace(struct uml_pt_regs *regs) if (ptrace(PTRACE_SETREGS, pid, 0, regs->gp)) fatal_sigsegv(); + if (put_fp_registers(pid, regs->fp)) + fatal_sigsegv(); + /* Now we set local_using_sysemu to be used for one loop */ local_using_sysemu = get_using_sysemu(); @@ -399,6 +402,12 @@ void userspace(struct uml_pt_regs *regs) fatal_sigsegv(); } + if (get_fp_registers(pid, regs->fp)) { + printk(UM_KERN_ERR "userspace - get_fp_registers failed, " + "errno = %d\n", errno); + fatal_sigsegv(); + } + UPT_SYSCALL_NR(regs) = -1; /* Assume: It's not a syscall */ if (WIFSTOPPED(status)) { @@ -457,10 +466,11 @@ void userspace(struct uml_pt_regs *regs) } static unsigned long thread_regs[MAX_REG_NR]; +static unsigned long thread_fp_regs[FP_SIZE]; static int __init init_thread_regs(void) { - get_safe_registers(thread_regs); + get_safe_registers(thread_regs, thread_fp_regs); /* Set parent's instruction pointer to start of clone-stub */ thread_regs[REGS_IP_INDEX] = STUB_CODE + (unsigned long) stub_clone_handler - @@ -503,6 +513,13 @@ int copy_context_skas0(unsigned long new_stack, int pid) return err; } + err = put_fp_registers(pid, thread_fp_regs); + if (err < 0) { + printk(UM_KERN_ERR "copy_context_skas0 : put_fp_registers " + "failed, pid = %d, err = %d\n", pid, err); + return err; + } + /* set a well known return code for detection of child write failure */ child_data->err = 12345678; diff --git a/arch/um/sys-i386/asm/ptrace.h b/arch/um/sys-i386/asm/ptrace.h index 0273e4d09af..5d2a5911253 100644 --- a/arch/um/sys-i386/asm/ptrace.h +++ b/arch/um/sys-i386/asm/ptrace.h @@ -42,11 +42,6 @@ */ struct user_desc; -extern int get_fpxregs(struct user_fxsr_struct __user *buf, - struct task_struct *child); -extern int set_fpxregs(struct user_fxsr_struct __user *buf, - struct task_struct *tsk); - extern int ptrace_get_thread_area(struct task_struct *child, int idx, struct user_desc __user *user_desc); diff --git a/arch/um/sys-i386/ptrace.c b/arch/um/sys-i386/ptrace.c index d23b2d3ea38..3375c271785 100644 --- a/arch/um/sys-i386/ptrace.c +++ b/arch/um/sys-i386/ptrace.c @@ -145,7 +145,7 @@ int peek_user(struct task_struct *child, long addr, long data) return put_user(tmp, (unsigned long __user *) data); } -int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child) +static int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child) { int err, n, cpu = ((struct thread_info *) child->stack)->cpu; struct user_i387_struct fpregs; @@ -161,7 +161,7 @@ int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child) return n; } -int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child) +static int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child) { int n, cpu = ((struct thread_info *) child->stack)->cpu; struct user_i387_struct fpregs; @@ -174,7 +174,7 @@ int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child) (unsigned long *) &fpregs); } -int get_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child) +static int get_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child) { int err, n, cpu = ((struct thread_info *) child->stack)->cpu; struct user_fxsr_struct fpregs; @@ -190,7 +190,7 @@ int get_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child) return n; } -int set_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child) +static int set_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child) { int n, cpu = ((struct thread_info *) child->stack)->cpu; struct user_fxsr_struct fpregs; @@ -206,5 +206,23 @@ int set_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child) long subarch_ptrace(struct task_struct *child, long request, unsigned long addr, unsigned long data) { - return -EIO; + int ret = -EIO; + void __user *datap = (void __user *) data; + switch (request) { + case PTRACE_GETFPREGS: /* Get the child FPU state. */ + ret = get_fpregs(datap, child); + break; + case PTRACE_SETFPREGS: /* Set the child FPU state. */ + ret = set_fpregs(datap, child); + break; + case PTRACE_GETFPXREGS: /* Get the child FPU state. */ + ret = get_fpxregs(datap, child); + break; + case PTRACE_SETFPXREGS: /* Set the child FPU state. */ + ret = set_fpxregs(datap, child); + break; + default: + ret = -EIO; + } + return ret; } diff --git a/arch/um/sys-i386/shared/sysdep/ptrace.h b/arch/um/sys-i386/shared/sysdep/ptrace.h index d50e62e0707..c398a507611 100644 --- a/arch/um/sys-i386/shared/sysdep/ptrace.h +++ b/arch/um/sys-i386/shared/sysdep/ptrace.h @@ -53,6 +53,7 @@ extern int sysemu_supported; struct uml_pt_regs { unsigned long gp[MAX_REG_NR]; + unsigned long fp[HOST_FPX_SIZE]; struct faultinfo faultinfo; long syscall; int is_user; diff --git a/arch/um/sys-x86_64/ptrace.c b/arch/um/sys-x86_64/ptrace.c index f43613643cd..4005506834f 100644 --- a/arch/um/sys-x86_64/ptrace.c +++ b/arch/um/sys-x86_64/ptrace.c @@ -145,7 +145,7 @@ int is_syscall(unsigned long addr) return instr == 0x050f; } -int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child) +static int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child) { int err, n, cpu = ((struct thread_info *) child->stack)->cpu; long fpregs[HOST_FP_SIZE]; @@ -162,7 +162,7 @@ int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child) return n; } -int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child) +static int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child) { int n, cpu = ((struct thread_info *) child->stack)->cpu; long fpregs[HOST_FP_SIZE]; @@ -182,12 +182,16 @@ long subarch_ptrace(struct task_struct *child, long request, void __user *datap = (void __user *) data; switch (request) { - case PTRACE_GETFPXREGS: /* Get the child FPU state. */ + case PTRACE_GETFPREGS: /* Get the child FPU state. */ ret = get_fpregs(datap, child); break; - case PTRACE_SETFPXREGS: /* Set the child FPU state. */ + case PTRACE_SETFPREGS: /* Set the child FPU state. */ ret = set_fpregs(datap, child); break; + case PTRACE_ARCH_PRCTL: + /* XXX Calls ptrace on the host - needs some SMP thinking */ + ret = arch_prctl(child, data, (void __user *) addr); + break; } return ret; diff --git a/arch/um/sys-x86_64/shared/sysdep/ptrace.h b/arch/um/sys-x86_64/shared/sysdep/ptrace.h index fdba5457947..8ee8f8e12af 100644 --- a/arch/um/sys-x86_64/shared/sysdep/ptrace.h +++ b/arch/um/sys-x86_64/shared/sysdep/ptrace.h @@ -85,6 +85,7 @@ struct uml_pt_regs { unsigned long gp[MAX_REG_NR]; + unsigned long fp[HOST_FP_SIZE]; struct faultinfo faultinfo; long syscall; int is_user; diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S index a0e866d233e..54edb207ff3 100644 --- a/arch/x86/ia32/ia32entry.S +++ b/arch/x86/ia32/ia32entry.S @@ -672,7 +672,7 @@ ia32_sys_call_table: .quad sys32_vm86_warning /* vm86 */ .quad quiet_ni_syscall /* query_module */ .quad sys_poll - .quad compat_sys_nfsservctl + .quad quiet_ni_syscall /* old nfsservctl */ .quad sys_setresgid16 /* 170 */ .quad sys_getresgid16 .quad sys_prctl diff --git a/arch/x86/include/asm/alternative-asm.h b/arch/x86/include/asm/alternative-asm.h index 4554cc6fb96..091508b533b 100644 --- a/arch/x86/include/asm/alternative-asm.h +++ b/arch/x86/include/asm/alternative-asm.h @@ -16,7 +16,6 @@ #endif .macro altinstruction_entry orig alt feature orig_len alt_len - .align 8 .long \orig - . .long \alt - . .word \feature diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h index 23fb6d79f20..37ad100a221 100644 --- a/arch/x86/include/asm/alternative.h +++ b/arch/x86/include/asm/alternative.h @@ -48,9 +48,6 @@ struct alt_instr { u16 cpuid; /* cpuid bit set for replacement */ u8 instrlen; /* length of original instruction */ u8 replacementlen; /* length of new instruction, <= instrlen */ -#ifdef CONFIG_X86_64 - u32 pad2; -#endif }; extern void alternative_instructions(void); @@ -83,7 +80,6 @@ static inline int alternatives_text_reserved(void *start, void *end) \ "661:\n\t" oldinstr "\n662:\n" \ ".section .altinstructions,\"a\"\n" \ - _ASM_ALIGN "\n" \ " .long 661b - .\n" /* label */ \ " .long 663f - .\n" /* new instruction */ \ " .word " __stringify(feature) "\n" /* feature bit */ \ diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h index 4258aac99a6..88b23a43f34 100644 --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -332,7 +332,6 @@ static __always_inline __pure bool __static_cpu_has(u16 bit) asm goto("1: jmp %l[t_no]\n" "2:\n" ".section .altinstructions,\"a\"\n" - _ASM_ALIGN "\n" " .long 1b - .\n" " .long 0\n" /* no replacement */ " .word %P0\n" /* feature bit */ @@ -350,7 +349,6 @@ static __always_inline __pure bool __static_cpu_has(u16 bit) asm volatile("1: movb $0,%0\n" "2:\n" ".section .altinstructions,\"a\"\n" - _ASM_ALIGN "\n" " .long 1b - .\n" " .long 3f - .\n" " .word %P1\n" /* feature bit */ diff --git a/arch/x86/include/asm/pvclock.h b/arch/x86/include/asm/pvclock.h index a518c0a4504..c59cc97fe6c 100644 --- a/arch/x86/include/asm/pvclock.h +++ b/arch/x86/include/asm/pvclock.h @@ -44,7 +44,7 @@ static inline u64 pvclock_scale_delta(u64 delta, u32 mul_frac, int shift) : "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) ); #elif defined(__x86_64__) __asm__ ( - "mul %[mul_frac] ; shrd $32, %[hi], %[lo]" + "mulq %[mul_frac] ; shrd $32, %[hi], %[lo]" : [lo]"=a"(product), [hi]"=d"(tmp) : "0"(delta), diff --git a/arch/x86/include/asm/unistd_64.h b/arch/x86/include/asm/unistd_64.h index d92641cc7ac..20104057344 100644 --- a/arch/x86/include/asm/unistd_64.h +++ b/arch/x86/include/asm/unistd_64.h @@ -414,7 +414,7 @@ __SYSCALL(__NR_query_module, sys_ni_syscall) __SYSCALL(__NR_quotactl, sys_quotactl) #define __NR_nfsservctl 180 -__SYSCALL(__NR_nfsservctl, sys_nfsservctl) +__SYSCALL(__NR_nfsservctl, sys_ni_syscall) /* reserved for LiS/STREAMS */ #define __NR_getpmsg 181 diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index adc66c3a1fe..34b18594e72 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -207,7 +207,6 @@ static int __cpuinit uv_wakeup_secondary(int phys_apicid, unsigned long start_ri ((start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) | APIC_DM_INIT; uv_write_global_mmr64(pnode, UVH_IPI_INT, val); - mdelay(10); val = (1UL << UVH_IPI_INT_SEND_SHFT) | (phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) | diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index 08119a37e53..6b96110bb0c 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -149,7 +149,6 @@ struct set_mtrr_data { */ static int mtrr_rendezvous_handler(void *info) { -#ifdef CONFIG_SMP struct set_mtrr_data *data = info; /* @@ -171,7 +170,6 @@ static int mtrr_rendezvous_handler(void *info) } else if (mtrr_aps_delayed_init || !cpu_online(smp_processor_id())) { mtrr_if->set_all(); } -#endif return 0; } diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index 4ee3abf20ed..cfa62ec090e 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -1900,6 +1900,9 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) perf_callchain_store(entry, regs->ip); + if (!current->mm) + return; + if (perf_callchain_user32(regs, entry)) return; diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index 5c1a9197491..f3f6f534400 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -54,6 +54,7 @@ #include <asm/ftrace.h> #include <asm/irq_vectors.h> #include <asm/cpufeature.h> +#include <asm/alternative-asm.h> /* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this. */ #include <linux/elf-em.h> @@ -873,12 +874,7 @@ ENTRY(simd_coprocessor_error) 661: pushl_cfi $do_general_protection 662: .section .altinstructions,"a" - .balign 4 - .long 661b - .long 663f - .word X86_FEATURE_XMM - .byte 662b-661b - .byte 664f-663f + altinstruction_entry 661b, 663f, X86_FEATURE_XMM, 662b-661b, 664f-663f .previous .section .altinstr_replacement,"ax" 663: pushl $do_simd_coprocessor_error diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S index fbb0a045a1a..bc19be332bc 100644 --- a/arch/x86/kernel/syscall_table_32.S +++ b/arch/x86/kernel/syscall_table_32.S @@ -168,7 +168,7 @@ ENTRY(sys_call_table) .long ptregs_vm86 .long sys_ni_syscall /* Old sys_query_module */ .long sys_poll - .long sys_nfsservctl + .long sys_ni_syscall /* Old nfsservctl */ .long sys_setresgid16 /* 170 */ .long sys_getresgid16 .long sys_prctl diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c index 6f08bc940fa..8b4cc5f067d 100644 --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -3603,7 +3603,7 @@ done_prefixes: break; case Src2CL: ctxt->src2.bytes = 1; - ctxt->src2.val = ctxt->regs[VCPU_REGS_RCX] & 0x8; + ctxt->src2.val = ctxt->regs[VCPU_REGS_RCX] & 0xff; break; case Src2ImmByte: rc = decode_imm(ctxt, &ctxt->src2, 1, true); diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 1c5b69373a0..8e8da7960db 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -400,7 +400,8 @@ static u64 __update_clear_spte_slow(u64 *sptep, u64 spte) /* xchg acts as a barrier before the setting of the high bits */ orig.spte_low = xchg(&ssptep->spte_low, sspte.spte_low); - orig.spte_high = ssptep->spte_high = sspte.spte_high; + orig.spte_high = ssptep->spte_high; + ssptep->spte_high = sspte.spte_high; count_spte_clear(sptep, spte); return orig.spte; diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index c95330267f0..039d91315bc 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -365,8 +365,13 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_pci_root *root) */ if (bus) { struct pci_bus *child; - list_for_each_entry(child, &bus->children, node) - pcie_bus_configure_settings(child, child->self->pcie_mpss); + list_for_each_entry(child, &bus->children, node) { + struct pci_dev *self = child->self; + if (!self) + continue; + + pcie_bus_configure_settings(child, self->pcie_mpss); + } } if (!bus) diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c index 7000e74b308..58425adc22c 100644 --- a/arch/x86/platform/mrst/mrst.c +++ b/arch/x86/platform/mrst/mrst.c @@ -689,7 +689,9 @@ static int __init sfi_parse_devs(struct sfi_table_header *table) irq_attr.trigger = 1; irq_attr.polarity = 1; io_apic_set_pci_routing(NULL, pentry->irq, &irq_attr); - } + } else + pentry->irq = 0; /* No irq */ + switch (pentry->type) { case SFI_DEV_TYPE_IPC: /* ID as IRQ is a hack that will go away */ diff --git a/arch/x86/platform/olpc/olpc.c b/arch/x86/platform/olpc/olpc.c index 8b9940e78e2..7cce722667b 100644 --- a/arch/x86/platform/olpc/olpc.c +++ b/arch/x86/platform/olpc/olpc.c @@ -161,13 +161,13 @@ restart: if (inbuf && inlen) { /* write data to EC */ for (i = 0; i < inlen; i++) { + pr_devel("olpc-ec: sending cmd arg 0x%x\n", inbuf[i]); + outb(inbuf[i], 0x68); if (wait_on_ibf(0x6c, 0)) { printk(KERN_ERR "olpc-ec: timeout waiting for" " EC accept data!\n"); goto err; } - pr_devel("olpc-ec: sending cmd arg 0x%x\n", inbuf[i]); - outb(inbuf[i], 0x68); } } if (outbuf && outlen) { diff --git a/arch/x86/vdso/vdso32/sysenter.S b/arch/x86/vdso/vdso32/sysenter.S index e2800affa75..e354bceee0e 100644 --- a/arch/x86/vdso/vdso32/sysenter.S +++ b/arch/x86/vdso/vdso32/sysenter.S @@ -43,7 +43,7 @@ __kernel_vsyscall: .space 7,0x90 /* 14: System call restart point is here! (SYSENTER_RETURN-2) */ - jmp .Lenter_kernel + int $0x80 /* 16: System call normal return point is here! */ VDSO32_SYSENTER_RETURN: /* Symbol used by sysenter.c via vdso32-syms.h */ pop %ebp diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 20a61427506..3dd53f997b1 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -1721,10 +1721,8 @@ void __init xen_setup_machphys_mapping(void) machine_to_phys_nr = MACH2PHYS_NR_ENTRIES; } #ifdef CONFIG_X86_32 - if ((machine_to_phys_mapping + machine_to_phys_nr) - < machine_to_phys_mapping) - machine_to_phys_nr = (unsigned long *)NULL - - machine_to_phys_mapping; + WARN_ON((machine_to_phys_mapping + (machine_to_phys_nr - 1)) + < machine_to_phys_mapping); #endif } diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index df118a825f3..46d6d21dbdb 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -184,6 +184,19 @@ static unsigned long __init xen_set_identity(const struct e820entry *list, PFN_UP(start_pci), PFN_DOWN(last)); return identity; } + +static unsigned long __init xen_get_max_pages(void) +{ + unsigned long max_pages = MAX_DOMAIN_PAGES; + domid_t domid = DOMID_SELF; + int ret; + + ret = HYPERVISOR_memory_op(XENMEM_maximum_reservation, &domid); + if (ret > 0) + max_pages = ret; + return min(max_pages, MAX_DOMAIN_PAGES); +} + /** * machine_specific_memory_setup - Hook for machine specific memory setup. **/ @@ -292,6 +305,14 @@ char * __init xen_memory_setup(void) sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map); + extra_limit = xen_get_max_pages(); + if (max_pfn + extra_pages > extra_limit) { + if (extra_limit > max_pfn) + extra_pages = extra_limit - max_pfn; + else + extra_pages = 0; + } + extra_pages += xen_return_unused_memory(xen_start_info->nr_pages, &e820); /* diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index e79dbb95482..041d4fe9dfe 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -32,6 +32,7 @@ #include <xen/page.h> #include <xen/events.h> +#include <xen/hvc-console.h> #include "xen-ops.h" #include "mmu.h" @@ -207,6 +208,15 @@ static void __init xen_smp_prepare_cpus(unsigned int max_cpus) unsigned cpu; unsigned int i; + if (skip_ioapic_setup) { + char *m = (max_cpus == 0) ? + "The nosmp parameter is incompatible with Xen; " \ + "use Xen dom0_max_vcpus=1 parameter" : + "The noapic parameter is incompatible with Xen"; + + xen_raw_printk(m); + panic(m); + } xen_init_lock_cpu(0); smp_store_cpu_info(0); @@ -522,7 +532,6 @@ static void __init xen_hvm_smp_prepare_cpus(unsigned int max_cpus) WARN_ON(xen_smp_intr_init(0)); xen_init_lock_cpu(0); - xen_init_spinlocks(); } static int __cpuinit xen_hvm_cpu_up(unsigned int cpu) diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c index 5158c505bef..163b4679556 100644 --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -168,9 +168,10 @@ cycle_t xen_clocksource_read(void) struct pvclock_vcpu_time_info *src; cycle_t ret; - src = &get_cpu_var(xen_vcpu)->time; + preempt_disable_notrace(); + src = &__get_cpu_var(xen_vcpu)->time; ret = pvclock_clocksource_read(src); - put_cpu_var(xen_vcpu); + preempt_enable_notrace(); return ret; } diff --git a/arch/x86/xen/xen-asm_32.S b/arch/x86/xen/xen-asm_32.S index 22a2093b586..b040b0e518c 100644 --- a/arch/x86/xen/xen-asm_32.S +++ b/arch/x86/xen/xen-asm_32.S @@ -113,11 +113,13 @@ xen_iret_start_crit: /* * If there's something pending, mask events again so we can - * jump back into xen_hypervisor_callback + * jump back into xen_hypervisor_callback. Otherwise do not + * touch XEN_vcpu_info_mask. */ - sete XEN_vcpu_info_mask(%eax) + jne 1f + movb $1, XEN_vcpu_info_mask(%eax) - popl %eax +1: popl %eax /* * From this point on the registers are restored and the stack diff --git a/arch/xtensa/include/asm/unistd.h b/arch/xtensa/include/asm/unistd.h index a6f934f37f1..798ee6d285a 100644 --- a/arch/xtensa/include/asm/unistd.h +++ b/arch/xtensa/include/asm/unistd.h @@ -455,7 +455,7 @@ __SYSCALL(203, sys_reboot, 3) #define __NR_quotactl 204 __SYSCALL(204, sys_quotactl, 4) #define __NR_nfsservctl 205 -__SYSCALL(205, sys_nfsservctl, 3) +__SYSCALL(205, sys_ni_syscall, 0) #define __NR__sysctl 206 __SYSCALL(206, sys_sysctl, 1) #define __NR_bdflush 207 diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c index bcaf16ee6ad..b596e54ddd7 100644 --- a/block/blk-cgroup.c +++ b/block/blk-cgroup.c @@ -785,10 +785,10 @@ static int blkio_policy_parse_and_set(char *buf, { char *s[4], *p, *major_s = NULL, *minor_s = NULL; int ret; - unsigned long major, minor, temp; + unsigned long major, minor; int i = 0; dev_t dev; - u64 bps, iops; + u64 temp; memset(s, 0, sizeof(s)); @@ -826,20 +826,23 @@ static int blkio_policy_parse_and_set(char *buf, dev = MKDEV(major, minor); - ret = blkio_check_dev_num(dev); + ret = strict_strtoull(s[1], 10, &temp); if (ret) - return ret; + return -EINVAL; - newpn->dev = dev; + /* For rule removal, do not check for device presence. */ + if (temp) { + ret = blkio_check_dev_num(dev); + if (ret) + return ret; + } - if (s[1] == NULL) - return -EINVAL; + newpn->dev = dev; switch (plid) { case BLKIO_POLICY_PROP: - ret = strict_strtoul(s[1], 10, &temp); - if (ret || (temp < BLKIO_WEIGHT_MIN && temp > 0) || - temp > BLKIO_WEIGHT_MAX) + if ((temp < BLKIO_WEIGHT_MIN && temp > 0) || + temp > BLKIO_WEIGHT_MAX) return -EINVAL; newpn->plid = plid; @@ -850,26 +853,18 @@ static int blkio_policy_parse_and_set(char *buf, switch(fileid) { case BLKIO_THROTL_read_bps_device: case BLKIO_THROTL_write_bps_device: - ret = strict_strtoull(s[1], 10, &bps); - if (ret) - return -EINVAL; - newpn->plid = plid; newpn->fileid = fileid; - newpn->val.bps = bps; + newpn->val.bps = temp; break; case BLKIO_THROTL_read_iops_device: case BLKIO_THROTL_write_iops_device: - ret = strict_strtoull(s[1], 10, &iops); - if (ret) - return -EINVAL; - - if (iops > THROTL_IOPS_MAX) + if (temp > THROTL_IOPS_MAX) return -EINVAL; newpn->plid = plid; newpn->fileid = fileid; - newpn->val.iops = (unsigned int)iops; + newpn->val.iops = (unsigned int)temp; break; } break; diff --git a/block/blk-core.c b/block/blk-core.c index 90e1ffdeb41..b2ed78afd9f 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1167,7 +1167,7 @@ static bool bio_attempt_front_merge(struct request_queue *q, * true if merge was successful, otherwise false. */ static bool attempt_plug_merge(struct task_struct *tsk, struct request_queue *q, - struct bio *bio) + struct bio *bio, unsigned int *request_count) { struct blk_plug *plug; struct request *rq; @@ -1176,10 +1176,13 @@ static bool attempt_plug_merge(struct task_struct *tsk, struct request_queue *q, plug = tsk->plug; if (!plug) goto out; + *request_count = 0; list_for_each_entry_reverse(rq, &plug->list, queuelist) { int el_ret; + (*request_count)++; + if (rq->q != q) continue; @@ -1219,6 +1222,7 @@ static int __make_request(struct request_queue *q, struct bio *bio) struct blk_plug *plug; int el_ret, rw_flags, where = ELEVATOR_INSERT_SORT; struct request *req; + unsigned int request_count = 0; /* * low level driver can indicate that it wants pages above a @@ -1237,7 +1241,7 @@ static int __make_request(struct request_queue *q, struct bio *bio) * Check if we can merge with the plugged list before grabbing * any locks. */ - if (attempt_plug_merge(current, q, bio)) + if (attempt_plug_merge(current, q, bio, &request_count)) goto out; spin_lock_irq(q->queue_lock); @@ -1302,11 +1306,10 @@ get_rq: if (__rq->q != q) plug->should_sort = 1; } + if (request_count >= BLK_MAX_REQUEST_COUNT) + blk_flush_plug_list(plug, false); list_add_tail(&req->queuelist, &plug->list); - plug->count++; drive_stat_acct(req, 1); - if (plug->count >= BLK_MAX_REQUEST_COUNT) - blk_flush_plug_list(plug, false); } else { spin_lock_irq(q->queue_lock); add_acct_request(q, req, where); @@ -2634,7 +2637,6 @@ void blk_start_plug(struct blk_plug *plug) INIT_LIST_HEAD(&plug->list); INIT_LIST_HEAD(&plug->cb_list); plug->should_sort = 0; - plug->count = 0; /* * If this is a nested plug, don't actually assign it. It will be @@ -2718,7 +2720,6 @@ void blk_flush_plug_list(struct blk_plug *plug, bool from_schedule) return; list_splice_init(&plug->list, &list); - plug->count = 0; if (plug->should_sort) { list_sort(NULL, &list, plug_rq_cmp); diff --git a/block/blk-softirq.c b/block/blk-softirq.c index 58340d0cb23..1366a89d8e6 100644 --- a/block/blk-softirq.c +++ b/block/blk-softirq.c @@ -115,7 +115,7 @@ void __blk_complete_request(struct request *req) /* * Select completion CPU */ - if (test_bit(QUEUE_FLAG_SAME_COMP, &q->queue_flags) && req->cpu != -1) { + if (req->cpu != -1) { ccpu = req->cpu; if (!test_bit(QUEUE_FLAG_SAME_FORCE, &q->queue_flags)) { ccpu = blk_cpu_to_group(ccpu); diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index 0ee17b5e7fb..e681805cdb4 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -258,11 +258,13 @@ queue_rq_affinity_store(struct request_queue *q, const char *page, size_t count) ret = queue_var_store(&val, page, count); spin_lock_irq(q->queue_lock); - if (val) { + if (val == 2) { queue_flag_set(QUEUE_FLAG_SAME_COMP, q); - if (val == 2) - queue_flag_set(QUEUE_FLAG_SAME_FORCE, q); - } else { + queue_flag_set(QUEUE_FLAG_SAME_FORCE, q); + } else if (val == 1) { + queue_flag_set(QUEUE_FLAG_SAME_COMP, q); + queue_flag_clear(QUEUE_FLAG_SAME_FORCE, q); + } else if (val == 0) { queue_flag_clear(QUEUE_FLAG_SAME_COMP, q); queue_flag_clear(QUEUE_FLAG_SAME_FORCE, q); } diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index a33bd4377c6..16ace89613b 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -130,8 +130,8 @@ struct cfq_queue { unsigned long slice_end; long slice_resid; - /* pending metadata requests */ - int meta_pending; + /* pending priority requests */ + int prio_pending; /* number of requests that are on the dispatch list or inside driver */ int dispatched; @@ -684,8 +684,8 @@ cfq_choose_req(struct cfq_data *cfqd, struct request *rq1, struct request *rq2, if (rq_is_sync(rq1) != rq_is_sync(rq2)) return rq_is_sync(rq1) ? rq1 : rq2; - if ((rq1->cmd_flags ^ rq2->cmd_flags) & REQ_META) - return rq1->cmd_flags & REQ_META ? rq1 : rq2; + if ((rq1->cmd_flags ^ rq2->cmd_flags) & REQ_PRIO) + return rq1->cmd_flags & REQ_PRIO ? rq1 : rq2; s1 = blk_rq_pos(rq1); s2 = blk_rq_pos(rq2); @@ -1612,9 +1612,9 @@ static void cfq_remove_request(struct request *rq) cfqq->cfqd->rq_queued--; cfq_blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg, rq_data_dir(rq), rq_is_sync(rq)); - if (rq->cmd_flags & REQ_META) { - WARN_ON(!cfqq->meta_pending); - cfqq->meta_pending--; + if (rq->cmd_flags & REQ_PRIO) { + WARN_ON(!cfqq->prio_pending); + cfqq->prio_pending--; } } @@ -3372,7 +3372,7 @@ cfq_should_preempt(struct cfq_data *cfqd, struct cfq_queue *new_cfqq, * So both queues are sync. Let the new request get disk time if * it's a metadata request and the current queue is doing regular IO. */ - if ((rq->cmd_flags & REQ_META) && !cfqq->meta_pending) + if ((rq->cmd_flags & REQ_PRIO) && !cfqq->prio_pending) return true; /* @@ -3439,8 +3439,8 @@ cfq_rq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq, struct cfq_io_context *cic = RQ_CIC(rq); cfqd->rq_queued++; - if (rq->cmd_flags & REQ_META) - cfqq->meta_pending++; + if (rq->cmd_flags & REQ_PRIO) + cfqq->prio_pending++; cfq_update_io_thinktime(cfqd, cfqq, cic); cfq_update_io_seektime(cfqd, cfqq, rq); diff --git a/drivers/acpi/acpica/acconfig.h b/drivers/acpi/acpica/acconfig.h index bc533dde16c..f895a244ca7 100644 --- a/drivers/acpi/acpica/acconfig.h +++ b/drivers/acpi/acpica/acconfig.h @@ -121,7 +121,7 @@ /* Maximum sleep allowed via Sleep() operator */ -#define ACPI_MAX_SLEEP 20000 /* Two seconds */ +#define ACPI_MAX_SLEEP 2000 /* Two seconds */ /****************************************************************************** * diff --git a/drivers/acpi/apei/Kconfig b/drivers/acpi/apei/Kconfig index c34aa51af4e..e3f47872ec2 100644 --- a/drivers/acpi/apei/Kconfig +++ b/drivers/acpi/apei/Kconfig @@ -13,6 +13,7 @@ config ACPI_APEI_GHES bool "APEI Generic Hardware Error Source" depends on ACPI_APEI && X86 select ACPI_HED + select IRQ_WORK select LLIST select GENERIC_ALLOCATOR help diff --git a/drivers/acpi/apei/apei-base.c b/drivers/acpi/apei/apei-base.c index 8041248fce9..61540360d5c 100644 --- a/drivers/acpi/apei/apei-base.c +++ b/drivers/acpi/apei/apei-base.c @@ -618,7 +618,7 @@ int apei_osc_setup(void) }; capbuf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE; - capbuf[OSC_SUPPORT_TYPE] = 0; + capbuf[OSC_SUPPORT_TYPE] = 1; capbuf[OSC_CONTROL_TYPE] = 0; if (ACPI_FAILURE(acpi_get_handle(NULL, "\\_SB", &handle)) diff --git a/drivers/base/devres.c b/drivers/base/devres.c index cf7a0c78805..65cd7483245 100644 --- a/drivers/base/devres.c +++ b/drivers/base/devres.c @@ -397,6 +397,7 @@ static int remove_nodes(struct device *dev, static int release_nodes(struct device *dev, struct list_head *first, struct list_head *end, unsigned long flags) + __releases(&dev->devres_lock) { LIST_HEAD(todo); int cnt; diff --git a/drivers/base/devtmpfs.c b/drivers/base/devtmpfs.c index 33e1bed68fd..a4760e095ff 100644 --- a/drivers/base/devtmpfs.c +++ b/drivers/base/devtmpfs.c @@ -376,7 +376,7 @@ int devtmpfs_mount(const char *mntdir) return err; } -static __initdata DECLARE_COMPLETION(setup_done); +static DECLARE_COMPLETION(setup_done); static int handle(const char *name, mode_t mode, struct device *dev) { diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c index bbb03e6f725..06ed6b4e7df 100644 --- a/drivers/base/firmware_class.c +++ b/drivers/base/firmware_class.c @@ -521,11 +521,6 @@ static int _request_firmware(const struct firmware **firmware_p, if (!firmware_p) return -EINVAL; - if (WARN_ON(usermodehelper_is_disabled())) { - dev_err(device, "firmware: %s will not be loaded\n", name); - return -EBUSY; - } - *firmware_p = firmware = kzalloc(sizeof(*firmware), GFP_KERNEL); if (!firmware) { dev_err(device, "%s: kmalloc(struct firmware) failed\n", @@ -539,6 +534,12 @@ static int _request_firmware(const struct firmware **firmware_p, return 0; } + if (WARN_ON(usermodehelper_is_disabled())) { + dev_err(device, "firmware: %s will not be loaded\n", name); + retval = -EBUSY; + goto out; + } + if (uevent) dev_dbg(device, "firmware: requesting %s\n", name); diff --git a/drivers/base/platform.c b/drivers/base/platform.c index 0cad9c7f6bb..99a5272d7c2 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -33,7 +33,7 @@ EXPORT_SYMBOL_GPL(platform_bus); /** * arch_setup_pdev_archdata - Allow manipulation of archdata before its used - * @dev: platform device + * @pdev: platform device * * This is called before platform_device_add() such that any pdev_archdata may * be setup before the platform_notifier is called. So if a user needs to diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c index a846b2f95cf..b97294e2d95 100644 --- a/drivers/base/power/clock_ops.c +++ b/drivers/base/power/clock_ops.c @@ -19,7 +19,7 @@ struct pm_clk_data { struct list_head clock_list; - struct mutex lock; + spinlock_t lock; }; enum pce_status { @@ -42,6 +42,22 @@ static struct pm_clk_data *__to_pcd(struct device *dev) } /** + * pm_clk_acquire - Acquire a device clock. + * @dev: Device whose clock is to be acquired. + * @ce: PM clock entry corresponding to the clock. + */ +static void pm_clk_acquire(struct device *dev, struct pm_clock_entry *ce) +{ + ce->clk = clk_get(dev, ce->con_id); + if (IS_ERR(ce->clk)) { + ce->status = PCE_STATUS_ERROR; + } else { + ce->status = PCE_STATUS_ACQUIRED; + dev_dbg(dev, "Clock %s managed by runtime PM.\n", ce->con_id); + } +} + +/** * pm_clk_add - Start using a device clock for power management. * @dev: Device whose clock is going to be used for power management. * @con_id: Connection ID of the clock. @@ -73,26 +89,23 @@ int pm_clk_add(struct device *dev, const char *con_id) } } - mutex_lock(&pcd->lock); + pm_clk_acquire(dev, ce); + + spin_lock_irq(&pcd->lock); list_add_tail(&ce->node, &pcd->clock_list); - mutex_unlock(&pcd->lock); + spin_unlock_irq(&pcd->lock); return 0; } /** * __pm_clk_remove - Destroy PM clock entry. * @ce: PM clock entry to destroy. - * - * This routine must be called under the mutex protecting the PM list of clocks - * corresponding the the @ce's device. */ static void __pm_clk_remove(struct pm_clock_entry *ce) { if (!ce) return; - list_del(&ce->node); - if (ce->status < PCE_STATUS_ERROR) { if (ce->status == PCE_STATUS_ENABLED) clk_disable(ce->clk); @@ -123,21 +136,25 @@ void pm_clk_remove(struct device *dev, const char *con_id) if (!pcd) return; - mutex_lock(&pcd->lock); + spin_lock_irq(&pcd->lock); list_for_each_entry(ce, &pcd->clock_list, node) { - if (!con_id && !ce->con_id) { - __pm_clk_remove(ce); - break; - } else if (!con_id || !ce->con_id) { + if (!con_id && !ce->con_id) + goto remove; + else if (!con_id || !ce->con_id) continue; - } else if (!strcmp(con_id, ce->con_id)) { - __pm_clk_remove(ce); - break; - } + else if (!strcmp(con_id, ce->con_id)) + goto remove; } - mutex_unlock(&pcd->lock); + spin_unlock_irq(&pcd->lock); + return; + + remove: + list_del(&ce->node); + spin_unlock_irq(&pcd->lock); + + __pm_clk_remove(ce); } /** @@ -158,7 +175,7 @@ int pm_clk_init(struct device *dev) } INIT_LIST_HEAD(&pcd->clock_list); - mutex_init(&pcd->lock); + spin_lock_init(&pcd->lock); dev->power.subsys_data = pcd; return 0; } @@ -175,20 +192,27 @@ void pm_clk_destroy(struct device *dev) { struct pm_clk_data *pcd = __to_pcd(dev); struct pm_clock_entry *ce, *c; + struct list_head list; if (!pcd) return; dev->power.subsys_data = NULL; + INIT_LIST_HEAD(&list); - mutex_lock(&pcd->lock); + spin_lock_irq(&pcd->lock); list_for_each_entry_safe_reverse(ce, c, &pcd->clock_list, node) - __pm_clk_remove(ce); + list_move(&ce->node, &list); - mutex_unlock(&pcd->lock); + spin_unlock_irq(&pcd->lock); kfree(pcd); + + list_for_each_entry_safe_reverse(ce, c, &list, node) { + list_del(&ce->node); + __pm_clk_remove(ce); + } } #endif /* CONFIG_PM */ @@ -196,23 +220,6 @@ void pm_clk_destroy(struct device *dev) #ifdef CONFIG_PM_RUNTIME /** - * pm_clk_acquire - Acquire a device clock. - * @dev: Device whose clock is to be acquired. - * @con_id: Connection ID of the clock. - */ -static void pm_clk_acquire(struct device *dev, - struct pm_clock_entry *ce) -{ - ce->clk = clk_get(dev, ce->con_id); - if (IS_ERR(ce->clk)) { - ce->status = PCE_STATUS_ERROR; - } else { - ce->status = PCE_STATUS_ACQUIRED; - dev_dbg(dev, "Clock %s managed by runtime PM.\n", ce->con_id); - } -} - -/** * pm_clk_suspend - Disable clocks in a device's PM clock list. * @dev: Device to disable the clocks for. */ @@ -220,25 +227,23 @@ int pm_clk_suspend(struct device *dev) { struct pm_clk_data *pcd = __to_pcd(dev); struct pm_clock_entry *ce; + unsigned long flags; dev_dbg(dev, "%s()\n", __func__); if (!pcd) return 0; - mutex_lock(&pcd->lock); + spin_lock_irqsave(&pcd->lock, flags); list_for_each_entry_reverse(ce, &pcd->clock_list, node) { - if (ce->status == PCE_STATUS_NONE) - pm_clk_acquire(dev, ce); - if (ce->status < PCE_STATUS_ERROR) { clk_disable(ce->clk); ce->status = PCE_STATUS_ACQUIRED; } } - mutex_unlock(&pcd->lock); + spin_unlock_irqrestore(&pcd->lock, flags); return 0; } @@ -251,25 +256,23 @@ int pm_clk_resume(struct device *dev) { struct pm_clk_data *pcd = __to_pcd(dev); struct pm_clock_entry *ce; + unsigned long flags; dev_dbg(dev, "%s()\n", __func__); if (!pcd) return 0; - mutex_lock(&pcd->lock); + spin_lock_irqsave(&pcd->lock, flags); list_for_each_entry(ce, &pcd->clock_list, node) { - if (ce->status == PCE_STATUS_NONE) - pm_clk_acquire(dev, ce); - if (ce->status < PCE_STATUS_ERROR) { clk_enable(ce->clk); ce->status = PCE_STATUS_ENABLED; } } - mutex_unlock(&pcd->lock); + spin_unlock_irqrestore(&pcd->lock, flags); return 0; } @@ -344,6 +347,7 @@ int pm_clk_suspend(struct device *dev) { struct pm_clk_data *pcd = __to_pcd(dev); struct pm_clock_entry *ce; + unsigned long flags; dev_dbg(dev, "%s()\n", __func__); @@ -351,12 +355,12 @@ int pm_clk_suspend(struct device *dev) if (!pcd || !dev->driver) return 0; - mutex_lock(&pcd->lock); + spin_lock_irqsave(&pcd->lock, flags); list_for_each_entry_reverse(ce, &pcd->clock_list, node) clk_disable(ce->clk); - mutex_unlock(&pcd->lock); + spin_unlock_irqrestore(&pcd->lock, flags); return 0; } @@ -369,6 +373,7 @@ int pm_clk_resume(struct device *dev) { struct pm_clk_data *pcd = __to_pcd(dev); struct pm_clock_entry *ce; + unsigned long flags; dev_dbg(dev, "%s()\n", __func__); @@ -376,12 +381,12 @@ int pm_clk_resume(struct device *dev) if (!pcd || !dev->driver) return 0; - mutex_lock(&pcd->lock); + spin_lock_irqsave(&pcd->lock, flags); list_for_each_entry(ce, &pcd->clock_list, node) clk_enable(ce->clk); - mutex_unlock(&pcd->lock); + spin_unlock_irqrestore(&pcd->lock, flags); return 0; } diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c index 0eef4da1ac6..20663f8dae4 100644 --- a/drivers/base/regmap/regmap.c +++ b/drivers/base/regmap/regmap.c @@ -168,13 +168,11 @@ struct regmap *regmap_init(struct device *dev, map->work_buf = kmalloc(map->format.buf_size, GFP_KERNEL); if (map->work_buf == NULL) { ret = -ENOMEM; - goto err_bus; + goto err_map; } return map; -err_bus: - module_put(map->bus->owner); err_map: kfree(map); err: @@ -188,7 +186,6 @@ EXPORT_SYMBOL_GPL(regmap_init); void regmap_exit(struct regmap *map) { kfree(map->work_buf); - module_put(map->bus->owner); kfree(map); } EXPORT_SYMBOL_GPL(regmap_exit); diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c index 873e2e4ac55..73b7b1a18fa 100644 --- a/drivers/bcma/main.c +++ b/drivers/bcma/main.c @@ -15,6 +15,7 @@ MODULE_LICENSE("GPL"); static int bcma_bus_match(struct device *dev, struct device_driver *drv); static int bcma_device_probe(struct device *dev); static int bcma_device_remove(struct device *dev); +static int bcma_device_uevent(struct device *dev, struct kobj_uevent_env *env); static ssize_t manuf_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -49,6 +50,7 @@ static struct bus_type bcma_bus_type = { .match = bcma_bus_match, .probe = bcma_device_probe, .remove = bcma_device_remove, + .uevent = bcma_device_uevent, .dev_attrs = bcma_device_attrs, }; @@ -227,6 +229,16 @@ static int bcma_device_remove(struct device *dev) return 0; } +static int bcma_device_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + struct bcma_device *core = container_of(dev, struct bcma_device, dev); + + return add_uevent_var(env, + "MODALIAS=bcma:m%04Xid%04Xrev%02Xcl%02X", + core->id.manuf, core->id.id, + core->id.rev, core->id.class); +} + static int __init bcma_modinit(void) { int err; diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 98de8f41867..9955a53733b 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -4250,7 +4250,7 @@ static int __init floppy_init(void) use_virtual_dma = can_use_virtual_dma & 1; fdc_state[0].address = FDC1; if (fdc_state[0].address == -1) { - del_timer(&fd_timeout); + del_timer_sync(&fd_timeout); err = -ENODEV; goto out_unreg_region; } @@ -4261,7 +4261,7 @@ static int __init floppy_init(void) fdc = 0; /* reset fdc in case of unexpected interrupt */ err = floppy_grab_irq_and_dma(); if (err) { - del_timer(&fd_timeout); + del_timer_sync(&fd_timeout); err = -EBUSY; goto out_unreg_region; } @@ -4318,7 +4318,7 @@ static int __init floppy_init(void) user_reset_fdc(-1, FD_RESET_ALWAYS, false); } fdc = 0; - del_timer(&fd_timeout); + del_timer_sync(&fd_timeout); current_drive = 0; initialized = true; if (have_no_fdc) { @@ -4368,7 +4368,7 @@ out_unreg_blkdev: unregister_blkdev(FLOPPY_MAJOR, "fd"); out_put_disk: while (dr--) { - del_timer(&motor_off_timer[dr]); + del_timer_sync(&motor_off_timer[dr]); if (disks[dr]->queue) blk_cleanup_queue(disks[dr]->queue); put_disk(disks[dr]); diff --git a/drivers/block/xen-blkback/common.h b/drivers/block/xen-blkback/common.h index 9e40b283a46..00c57c90e2d 100644 --- a/drivers/block/xen-blkback/common.h +++ b/drivers/block/xen-blkback/common.h @@ -46,7 +46,7 @@ #define DRV_PFX "xen-blkback:" #define DPRINTK(fmt, args...) \ - pr_debug(DRV_PFX "(%s:%d) " fmt ".\n", \ + pr_debug(DRV_PFX "(%s:%d) " fmt ".\n", \ __func__, __LINE__, ##args) diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c index 3f129b45451..5fd2010f7d2 100644 --- a/drivers/block/xen-blkback/xenbus.c +++ b/drivers/block/xen-blkback/xenbus.c @@ -590,7 +590,7 @@ static void frontend_changed(struct xenbus_device *dev, /* * Enforce precondition before potential leak point. - * blkif_disconnect() is idempotent. + * xen_blkif_disconnect() is idempotent. */ xen_blkif_disconnect(be->blkif); @@ -601,17 +601,17 @@ static void frontend_changed(struct xenbus_device *dev, break; case XenbusStateClosing: - xen_blkif_disconnect(be->blkif); xenbus_switch_state(dev, XenbusStateClosing); break; case XenbusStateClosed: + xen_blkif_disconnect(be->blkif); xenbus_switch_state(dev, XenbusStateClosed); if (xenbus_dev_is_online(dev)) break; /* fall through if not online */ case XenbusStateUnknown: - /* implies blkif_disconnect() via blkback_remove() */ + /* implies xen_blkif_disconnect() via xen_blkbk_remove() */ device_unregister(&dev->dev); break; diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index a5854735bb2..db7cb8111fb 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -63,6 +63,7 @@ static struct usb_device_id ath3k_table[] = { /* Atheros AR3011 with sflash firmware*/ { USB_DEVICE(0x0CF3, 0x3002) }, { USB_DEVICE(0x13d3, 0x3304) }, + { USB_DEVICE(0x0930, 0x0215) }, /* Atheros AR9285 Malbec with sflash firmware */ { USB_DEVICE(0x03F0, 0x311D) }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 91d13a9e8c6..9cbac6b445e 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -72,9 +72,15 @@ static struct usb_device_id btusb_table[] = { /* Apple MacBookAir3,1, MacBookAir3,2 */ { USB_DEVICE(0x05ac, 0x821b) }, + /* Apple MacBookAir4,1 */ + { USB_DEVICE(0x05ac, 0x821f) }, + /* Apple MacBookPro8,2 */ { USB_DEVICE(0x05ac, 0x821a) }, + /* Apple MacMini5,1 */ + { USB_DEVICE(0x05ac, 0x8281) }, + /* AVM BlueFRITZ! USB v2.0 */ { USB_DEVICE(0x057c, 0x3800) }, @@ -106,6 +112,7 @@ static struct usb_device_id blacklist_table[] = { /* Atheros 3011 with sflash firmware */ { USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE }, { USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE }, + { USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE }, /* Atheros AR9285 Malbec with sflash firmware */ { USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE }, @@ -256,7 +263,9 @@ static void btusb_intr_complete(struct urb *urb) err = usb_submit_urb(urb, GFP_ATOMIC); if (err < 0) { - if (err != -EPERM) + /* -EPERM: urb is being killed; + * -ENODEV: device got disconnected */ + if (err != -EPERM && err != -ENODEV) BT_ERR("%s urb %p failed to resubmit (%d)", hdev->name, urb, -err); usb_unanchor_urb(urb); @@ -341,7 +350,9 @@ static void btusb_bulk_complete(struct urb *urb) err = usb_submit_urb(urb, GFP_ATOMIC); if (err < 0) { - if (err != -EPERM) + /* -EPERM: urb is being killed; + * -ENODEV: device got disconnected */ + if (err != -EPERM && err != -ENODEV) BT_ERR("%s urb %p failed to resubmit (%d)", hdev->name, urb, -err); usb_unanchor_urb(urb); @@ -431,7 +442,9 @@ static void btusb_isoc_complete(struct urb *urb) err = usb_submit_urb(urb, GFP_ATOMIC); if (err < 0) { - if (err != -EPERM) + /* -EPERM: urb is being killed; + * -ENODEV: device got disconnected */ + if (err != -EPERM && err != -ENODEV) BT_ERR("%s urb %p failed to resubmit (%d)", hdev->name, urb, -err); usb_unanchor_urb(urb); diff --git a/drivers/bluetooth/btwilink.c b/drivers/bluetooth/btwilink.c index 65d27aff553..04d353f58d7 100644 --- a/drivers/bluetooth/btwilink.c +++ b/drivers/bluetooth/btwilink.c @@ -125,6 +125,13 @@ static long st_receive(void *priv_data, struct sk_buff *skb) /* protocol structure registered with shared transport */ static struct st_proto_s ti_st_proto[MAX_BT_CHNL_IDS] = { { + .chnl_id = HCI_EVENT_PKT, /* HCI Events */ + .hdr_len = sizeof(struct hci_event_hdr), + .offset_len_in_hdr = offsetof(struct hci_event_hdr, plen), + .len_size = 1, /* sizeof(plen) in struct hci_event_hdr */ + .reserve = 8, + }, + { .chnl_id = HCI_ACLDATA_PKT, /* ACL */ .hdr_len = sizeof(struct hci_acl_hdr), .offset_len_in_hdr = offsetof(struct hci_acl_hdr, dlen), @@ -138,13 +145,6 @@ static struct st_proto_s ti_st_proto[MAX_BT_CHNL_IDS] = { .len_size = 1, /* sizeof(dlen) in struct hci_sco_hdr */ .reserve = 8, }, - { - .chnl_id = HCI_EVENT_PKT, /* HCI Events */ - .hdr_len = sizeof(struct hci_event_hdr), - .offset_len_in_hdr = offsetof(struct hci_event_hdr, plen), - .len_size = 1, /* sizeof(plen) in struct hci_event_hdr */ - .reserve = 8, - }, }; /* Called from HCI core to initialize the device */ @@ -240,7 +240,7 @@ static int ti_st_close(struct hci_dev *hdev) if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags)) return 0; - for (i = 0; i < MAX_BT_CHNL_IDS; i++) { + for (i = MAX_BT_CHNL_IDS-1; i >= 0; i--) { err = st_unregister(&ti_st_proto[i]); if (err) BT_ERR("st_unregister(%d) failed with error %d", diff --git a/drivers/char/msm_smd_pkt.c b/drivers/char/msm_smd_pkt.c index b6f8a65c996..8eca55deb3a 100644 --- a/drivers/char/msm_smd_pkt.c +++ b/drivers/char/msm_smd_pkt.c @@ -379,9 +379,8 @@ static int __init smd_pkt_init(void) for (i = 0; i < NUM_SMD_PKT_PORTS; ++i) { smd_pkt_devp[i] = kzalloc(sizeof(struct smd_pkt_dev), GFP_KERNEL); - if (IS_ERR(smd_pkt_devp[i])) { - r = PTR_ERR(smd_pkt_devp[i]); - pr_err("kmalloc() failed %d\n", r); + if (!smd_pkt_devp[i]) { + pr_err("kmalloc() failed\n"); goto clean_cdevs; } diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig index f6595aba4f0..fa567f1158c 100644 --- a/drivers/char/tpm/Kconfig +++ b/drivers/char/tpm/Kconfig @@ -43,6 +43,7 @@ config TCG_NSC config TCG_ATMEL tristate "Atmel TPM Interface" + depends on PPC64 || HAS_IOPORT ---help--- If you have a TPM security chip from Atmel say Yes and it will be accessible from within Linux. To compile this driver diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c index caf8012ef47..9ca5c021d0b 100644 --- a/drivers/char/tpm/tpm.c +++ b/drivers/char/tpm/tpm.c @@ -383,6 +383,9 @@ static ssize_t tpm_transmit(struct tpm_chip *chip, const char *buf, u32 count, ordinal; unsigned long stop; + if (bufsiz > TPM_BUFSIZE) + bufsiz = TPM_BUFSIZE; + count = be32_to_cpu(*((__be32 *) (buf + 2))); ordinal = be32_to_cpu(*((__be32 *) (buf + 6))); if (count == 0) @@ -1102,6 +1105,7 @@ ssize_t tpm_read(struct file *file, char __user *buf, { struct tpm_chip *chip = file->private_data; ssize_t ret_size; + int rc; del_singleshot_timer_sync(&chip->user_read_timer); flush_work_sync(&chip->work); @@ -1112,8 +1116,11 @@ ssize_t tpm_read(struct file *file, char __user *buf, ret_size = size; mutex_lock(&chip->buffer_mutex); - if (copy_to_user(buf, chip->data_buffer, ret_size)) + rc = copy_to_user(buf, chip->data_buffer, ret_size); + memset(chip->data_buffer, 0, ret_size); + if (rc) ret_size = -EFAULT; + mutex_unlock(&chip->buffer_mutex); } diff --git a/drivers/char/tpm/tpm_nsc.c b/drivers/char/tpm/tpm_nsc.c index 82facc9104c..4d2464871ad 100644 --- a/drivers/char/tpm/tpm_nsc.c +++ b/drivers/char/tpm/tpm_nsc.c @@ -396,8 +396,6 @@ static void __exit cleanup_nsc(void) if (pdev) { tpm_nsc_remove(&pdev->dev); platform_device_unregister(pdev); - kfree(pdev); - pdev = NULL; } platform_driver_unregister(&nsc_drv); diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index dc7c033ef58..32a77becc09 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -26,6 +26,7 @@ #include <linux/clk.h> #include <linux/irq.h> #include <linux/err.h> +#include <linux/delay.h> #include <linux/clocksource.h> #include <linux/clockchips.h> #include <linux/sh_timer.h> @@ -150,13 +151,13 @@ static void sh_cmt_start_stop_ch(struct sh_cmt_priv *p, int start) static int sh_cmt_enable(struct sh_cmt_priv *p, unsigned long *rate) { - int ret; + int k, ret; /* enable clock */ ret = clk_enable(p->clk); if (ret) { dev_err(&p->pdev->dev, "cannot enable clock\n"); - return ret; + goto err0; } /* make sure channel is disabled */ @@ -174,9 +175,38 @@ static int sh_cmt_enable(struct sh_cmt_priv *p, unsigned long *rate) sh_cmt_write(p, CMCOR, 0xffffffff); sh_cmt_write(p, CMCNT, 0); + /* + * According to the sh73a0 user's manual, as CMCNT can be operated + * only by the RCLK (Pseudo 32 KHz), there's one restriction on + * modifying CMCNT register; two RCLK cycles are necessary before + * this register is either read or any modification of the value + * it holds is reflected in the LSI's actual operation. + * + * While at it, we're supposed to clear out the CMCNT as of this + * moment, so make sure it's processed properly here. This will + * take RCLKx2 at maximum. + */ + for (k = 0; k < 100; k++) { + if (!sh_cmt_read(p, CMCNT)) + break; + udelay(1); + } + + if (sh_cmt_read(p, CMCNT)) { + dev_err(&p->pdev->dev, "cannot clear CMCNT\n"); + ret = -ETIMEDOUT; + goto err1; + } + /* enable channel */ sh_cmt_start_stop_ch(p, 1); return 0; + err1: + /* stop clock */ + clk_disable(p->clk); + + err0: + return ret; } static void sh_cmt_disable(struct sh_cmt_priv *p) diff --git a/drivers/cpufreq/pcc-cpufreq.c b/drivers/cpufreq/pcc-cpufreq.c index 7b0603eb012..cdc02ac8f41 100644 --- a/drivers/cpufreq/pcc-cpufreq.c +++ b/drivers/cpufreq/pcc-cpufreq.c @@ -261,6 +261,9 @@ static int pcc_get_offset(int cpu) pr = per_cpu(processors, cpu); pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu); + if (!pr) + return -ENODEV; + status = acpi_evaluate_object(pr->handle, "PCCP", NULL, &buffer); if (ACPI_FAILURE(status)) return -ENODEV; diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 2e3b3d38c46..ab8f469f5cf 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -193,7 +193,8 @@ config ARCH_HAS_ASYNC_TX_FIND_CHANNEL config PL330_DMA tristate "DMA API Driver for PL330" select DMA_ENGINE - depends on PL330 + depends on ARM_AMBA + select PL330 help Select if your platform has one or more PL330 DMACs. You need to provide platform specific settings via diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index be21e3f138a..cd8df7f5b5c 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -66,32 +66,29 @@ * after the final transfer signalled by LBREQ or LSREQ. The DMAC * will then move to the next LLI entry. * - * Only the former works sanely with scatter lists, so we only implement - * the DMAC flow control method. However, peripherals which use the LBREQ - * and LSREQ signals (eg, MMCI) are unable to use this mode, which through - * these hardware restrictions prevents them from using scatter DMA. - * * Global TODO: * - Break out common code from arch/arm/mach-s3c64xx and share */ -#include <linux/device.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/dma-mapping.h> -#include <linux/dmapool.h> -#include <linux/dmaengine.h> #include <linux/amba/bus.h> #include <linux/amba/pl08x.h> #include <linux/debugfs.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/dmaengine.h> +#include <linux/dmapool.h> +#include <linux/dma-mapping.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/pm_runtime.h> #include <linux/seq_file.h> - +#include <linux/slab.h> #include <asm/hardware/pl080.h> #define DRIVER_NAME "pl08xdmac" +static struct amba_driver pl08x_amba_driver; + /** * struct vendor_data - vendor-specific config parameters for PL08x derivatives * @channels: the number of channels available in this variant @@ -126,7 +123,8 @@ struct pl08x_lli { * @phy_chans: array of data for the physical channels * @pool: a pool for the LLI descriptors * @pool_ctr: counter of LLIs in the pool - * @lli_buses: bitmask to or in to LLI pointer selecting AHB port for LLI fetches + * @lli_buses: bitmask to or in to LLI pointer selecting AHB port for LLI + * fetches * @mem_buses: set to indicate memory transfers on AHB2. * @lock: a spinlock for this struct */ @@ -149,14 +147,6 @@ struct pl08x_driver_data { * PL08X specific defines */ -/* - * Memory boundaries: the manual for PL08x says that the controller - * cannot read past a 1KiB boundary, so these defines are used to - * create transfer LLIs that do not cross such boundaries. - */ -#define PL08X_BOUNDARY_SHIFT (10) /* 1KB 0x400 */ -#define PL08X_BOUNDARY_SIZE (1 << PL08X_BOUNDARY_SHIFT) - /* Size (bytes) of each LLI buffer allocated for one transfer */ # define PL08X_LLI_TSFR_SIZE 0x2000 @@ -272,7 +262,6 @@ static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch) writel(val, ch->base + PL080_CH_CONFIG); } - /* * pl08x_terminate_phy_chan() stops the channel, clears the FIFO and * clears any pending interrupt status. This should not be used for @@ -407,6 +396,7 @@ pl08x_get_phy_channel(struct pl08x_driver_data *pl08x, return NULL; } + pm_runtime_get_sync(&pl08x->adev->dev); return ch; } @@ -420,6 +410,8 @@ static inline void pl08x_put_phy_channel(struct pl08x_driver_data *pl08x, /* Stop the channel and clear its interrupts */ pl08x_terminate_phy_chan(pl08x, ch); + pm_runtime_put(&pl08x->adev->dev); + /* Mark it as free */ ch->serving = NULL; spin_unlock_irqrestore(&ch->lock, flags); @@ -499,36 +491,30 @@ struct pl08x_lli_build_data { }; /* - * Autoselect a master bus to use for the transfer this prefers the - * destination bus if both available if fixed address on one bus the - * other will be chosen + * Autoselect a master bus to use for the transfer. Slave will be the chosen as + * victim in case src & dest are not similarly aligned. i.e. If after aligning + * masters address with width requirements of transfer (by sending few byte by + * byte data), slave is still not aligned, then its width will be reduced to + * BYTE. + * - prefers the destination bus if both available + * - prefers bus with fixed address (i.e. peripheral) */ static void pl08x_choose_master_bus(struct pl08x_lli_build_data *bd, struct pl08x_bus_data **mbus, struct pl08x_bus_data **sbus, u32 cctl) { if (!(cctl & PL080_CONTROL_DST_INCR)) { - *mbus = &bd->srcbus; - *sbus = &bd->dstbus; - } else if (!(cctl & PL080_CONTROL_SRC_INCR)) { *mbus = &bd->dstbus; *sbus = &bd->srcbus; + } else if (!(cctl & PL080_CONTROL_SRC_INCR)) { + *mbus = &bd->srcbus; + *sbus = &bd->dstbus; } else { - if (bd->dstbus.buswidth == 4) { - *mbus = &bd->dstbus; - *sbus = &bd->srcbus; - } else if (bd->srcbus.buswidth == 4) { - *mbus = &bd->srcbus; - *sbus = &bd->dstbus; - } else if (bd->dstbus.buswidth == 2) { + if (bd->dstbus.buswidth >= bd->srcbus.buswidth) { *mbus = &bd->dstbus; *sbus = &bd->srcbus; - } else if (bd->srcbus.buswidth == 2) { + } else { *mbus = &bd->srcbus; *sbus = &bd->dstbus; - } else { - /* bd->srcbus.buswidth == 1 */ - *mbus = &bd->dstbus; - *sbus = &bd->srcbus; } } } @@ -547,7 +533,8 @@ static void pl08x_fill_lli_for_desc(struct pl08x_lli_build_data *bd, llis_va[num_llis].cctl = cctl; llis_va[num_llis].src = bd->srcbus.addr; llis_va[num_llis].dst = bd->dstbus.addr; - llis_va[num_llis].lli = llis_bus + (num_llis + 1) * sizeof(struct pl08x_lli); + llis_va[num_llis].lli = llis_bus + (num_llis + 1) * + sizeof(struct pl08x_lli); llis_va[num_llis].lli |= bd->lli_bus; if (cctl & PL080_CONTROL_SRC_INCR) @@ -560,16 +547,12 @@ static void pl08x_fill_lli_for_desc(struct pl08x_lli_build_data *bd, bd->remainder -= len; } -/* - * Return number of bytes to fill to boundary, or len. - * This calculation works for any value of addr. - */ -static inline size_t pl08x_pre_boundary(u32 addr, size_t len) +static inline void prep_byte_width_lli(struct pl08x_lli_build_data *bd, + u32 *cctl, u32 len, int num_llis, size_t *total_bytes) { - size_t boundary_len = PL08X_BOUNDARY_SIZE - - (addr & (PL08X_BOUNDARY_SIZE - 1)); - - return min(boundary_len, len); + *cctl = pl08x_cctl_bits(*cctl, 1, 1, len); + pl08x_fill_lli_for_desc(bd, num_llis, len, *cctl); + (*total_bytes) += len; } /* @@ -583,13 +566,11 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, struct pl08x_bus_data *mbus, *sbus; struct pl08x_lli_build_data bd; int num_llis = 0; - u32 cctl; - size_t max_bytes_per_lli; - size_t total_bytes = 0; + u32 cctl, early_bytes = 0; + size_t max_bytes_per_lli, total_bytes = 0; struct pl08x_lli *llis_va; - txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT, - &txd->llis_bus); + txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT, &txd->llis_bus); if (!txd->llis_va) { dev_err(&pl08x->adev->dev, "%s no memory for llis\n", __func__); return 0; @@ -619,55 +600,85 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, bd.srcbus.buswidth = bd.srcbus.maxwidth; bd.dstbus.buswidth = bd.dstbus.maxwidth; - /* - * Bytes transferred == tsize * MIN(buswidths), not max(buswidths) - */ - max_bytes_per_lli = min(bd.srcbus.buswidth, bd.dstbus.buswidth) * - PL080_CONTROL_TRANSFER_SIZE_MASK; - /* We need to count this down to zero */ bd.remainder = txd->len; - /* - * Choose bus to align to - * - prefers destination bus if both available - * - if fixed address on one bus chooses other - */ pl08x_choose_master_bus(&bd, &mbus, &sbus, cctl); - dev_vdbg(&pl08x->adev->dev, "src=0x%08x%s/%u dst=0x%08x%s/%u len=%zu llimax=%zu\n", + dev_vdbg(&pl08x->adev->dev, "src=0x%08x%s/%u dst=0x%08x%s/%u len=%zu\n", bd.srcbus.addr, cctl & PL080_CONTROL_SRC_INCR ? "+" : "", bd.srcbus.buswidth, bd.dstbus.addr, cctl & PL080_CONTROL_DST_INCR ? "+" : "", bd.dstbus.buswidth, - bd.remainder, max_bytes_per_lli); + bd.remainder); dev_vdbg(&pl08x->adev->dev, "mbus=%s sbus=%s\n", mbus == &bd.srcbus ? "src" : "dst", sbus == &bd.srcbus ? "src" : "dst"); - if (txd->len < mbus->buswidth) { - /* Less than a bus width available - send as single bytes */ - while (bd.remainder) { - dev_vdbg(&pl08x->adev->dev, - "%s single byte LLIs for a transfer of " - "less than a bus width (remain 0x%08x)\n", - __func__, bd.remainder); - cctl = pl08x_cctl_bits(cctl, 1, 1, 1); - pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl); - total_bytes++; + /* + * Zero length is only allowed if all these requirements are met: + * - flow controller is peripheral. + * - src.addr is aligned to src.width + * - dst.addr is aligned to dst.width + * + * sg_len == 1 should be true, as there can be two cases here: + * - Memory addresses are contiguous and are not scattered. Here, Only + * one sg will be passed by user driver, with memory address and zero + * length. We pass this to controller and after the transfer it will + * receive the last burst request from peripheral and so transfer + * finishes. + * + * - Memory addresses are scattered and are not contiguous. Here, + * Obviously as DMA controller doesn't know when a lli's transfer gets + * over, it can't load next lli. So in this case, there has to be an + * assumption that only one lli is supported. Thus, we can't have + * scattered addresses. + */ + if (!bd.remainder) { + u32 fc = (txd->ccfg & PL080_CONFIG_FLOW_CONTROL_MASK) >> + PL080_CONFIG_FLOW_CONTROL_SHIFT; + if (!((fc >= PL080_FLOW_SRC2DST_DST) && + (fc <= PL080_FLOW_SRC2DST_SRC))) { + dev_err(&pl08x->adev->dev, "%s sg len can't be zero", + __func__); + return 0; } - } else { - /* Make one byte LLIs until master bus is aligned */ - while ((mbus->addr) % (mbus->buswidth)) { - dev_vdbg(&pl08x->adev->dev, - "%s adjustment lli for less than bus width " - "(remain 0x%08x)\n", - __func__, bd.remainder); - cctl = pl08x_cctl_bits(cctl, 1, 1, 1); - pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl); - total_bytes++; + + if ((bd.srcbus.addr % bd.srcbus.buswidth) || + (bd.srcbus.addr % bd.srcbus.buswidth)) { + dev_err(&pl08x->adev->dev, + "%s src & dst address must be aligned to src" + " & dst width if peripheral is flow controller", + __func__); + return 0; } + cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth, + bd.dstbus.buswidth, 0); + pl08x_fill_lli_for_desc(&bd, num_llis++, 0, cctl); + } + + /* + * Send byte by byte for following cases + * - Less than a bus width available + * - until master bus is aligned + */ + if (bd.remainder < mbus->buswidth) + early_bytes = bd.remainder; + else if ((mbus->addr) % (mbus->buswidth)) { + early_bytes = mbus->buswidth - (mbus->addr) % (mbus->buswidth); + if ((bd.remainder - early_bytes) < mbus->buswidth) + early_bytes = bd.remainder; + } + + if (early_bytes) { + dev_vdbg(&pl08x->adev->dev, "%s byte width LLIs " + "(remain 0x%08x)\n", __func__, bd.remainder); + prep_byte_width_lli(&bd, &cctl, early_bytes, num_llis++, + &total_bytes); + } + + if (bd.remainder) { /* * Master now aligned * - if slave is not then we must set its width down @@ -680,138 +691,55 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, sbus->buswidth = 1; } + /* Bytes transferred = tsize * src width, not MIN(buswidths) */ + max_bytes_per_lli = bd.srcbus.buswidth * + PL080_CONTROL_TRANSFER_SIZE_MASK; + /* * Make largest possible LLIs until less than one bus * width left */ while (bd.remainder > (mbus->buswidth - 1)) { - size_t lli_len, target_len, tsize, odd_bytes; + size_t lli_len, tsize, width; /* * If enough left try to send max possible, * otherwise try to send the remainder */ - target_len = min(bd.remainder, max_bytes_per_lli); + lli_len = min(bd.remainder, max_bytes_per_lli); /* - * Set bus lengths for incrementing buses to the - * number of bytes which fill to next memory boundary, - * limiting on the target length calculated above. + * Check against maximum bus alignment: Calculate actual + * transfer size in relation to bus width and get a + * maximum remainder of the highest bus width - 1 */ - if (cctl & PL080_CONTROL_SRC_INCR) - bd.srcbus.fill_bytes = - pl08x_pre_boundary(bd.srcbus.addr, - target_len); - else - bd.srcbus.fill_bytes = target_len; - - if (cctl & PL080_CONTROL_DST_INCR) - bd.dstbus.fill_bytes = - pl08x_pre_boundary(bd.dstbus.addr, - target_len); - else - bd.dstbus.fill_bytes = target_len; - - /* Find the nearest */ - lli_len = min(bd.srcbus.fill_bytes, - bd.dstbus.fill_bytes); - - BUG_ON(lli_len > bd.remainder); - - if (lli_len <= 0) { - dev_err(&pl08x->adev->dev, - "%s lli_len is %zu, <= 0\n", - __func__, lli_len); - return 0; - } - - if (lli_len == target_len) { - /* - * Can send what we wanted. - * Maintain alignment - */ - lli_len = (lli_len/mbus->buswidth) * - mbus->buswidth; - odd_bytes = 0; - } else { - /* - * So now we know how many bytes to transfer - * to get to the nearest boundary. The next - * LLI will past the boundary. However, we - * may be working to a boundary on the slave - * bus. We need to ensure the master stays - * aligned, and that we are working in - * multiples of the bus widths. - */ - odd_bytes = lli_len % mbus->buswidth; - lli_len -= odd_bytes; - - } - - if (lli_len) { - /* - * Check against minimum bus alignment: - * Calculate actual transfer size in relation - * to bus width an get a maximum remainder of - * the smallest bus width - 1 - */ - /* FIXME: use round_down()? */ - tsize = lli_len / min(mbus->buswidth, - sbus->buswidth); - lli_len = tsize * min(mbus->buswidth, - sbus->buswidth); - - if (target_len != lli_len) { - dev_vdbg(&pl08x->adev->dev, - "%s can't send what we want. Desired 0x%08zx, lli of 0x%08zx bytes in txd of 0x%08zx\n", - __func__, target_len, lli_len, txd->len); - } - - cctl = pl08x_cctl_bits(cctl, - bd.srcbus.buswidth, - bd.dstbus.buswidth, - tsize); - - dev_vdbg(&pl08x->adev->dev, - "%s fill lli with single lli chunk of size 0x%08zx (remainder 0x%08zx)\n", - __func__, lli_len, bd.remainder); - pl08x_fill_lli_for_desc(&bd, num_llis++, - lli_len, cctl); - total_bytes += lli_len; - } + width = max(mbus->buswidth, sbus->buswidth); + lli_len = (lli_len / width) * width; + tsize = lli_len / bd.srcbus.buswidth; - - if (odd_bytes) { - /* - * Creep past the boundary, maintaining - * master alignment - */ - int j; - for (j = 0; (j < mbus->buswidth) - && (bd.remainder); j++) { - cctl = pl08x_cctl_bits(cctl, 1, 1, 1); - dev_vdbg(&pl08x->adev->dev, - "%s align with boundary, single byte (remain 0x%08zx)\n", - __func__, bd.remainder); - pl08x_fill_lli_for_desc(&bd, - num_llis++, 1, cctl); - total_bytes++; - } - } + dev_vdbg(&pl08x->adev->dev, + "%s fill lli with single lli chunk of " + "size 0x%08zx (remainder 0x%08zx)\n", + __func__, lli_len, bd.remainder); + + cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth, + bd.dstbus.buswidth, tsize); + pl08x_fill_lli_for_desc(&bd, num_llis++, lli_len, cctl); + total_bytes += lli_len; } /* * Send any odd bytes */ - while (bd.remainder) { - cctl = pl08x_cctl_bits(cctl, 1, 1, 1); + if (bd.remainder) { dev_vdbg(&pl08x->adev->dev, - "%s align with boundary, single odd byte (remain %zu)\n", + "%s align with boundary, send odd bytes (remain %zu)\n", __func__, bd.remainder); - pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl); - total_bytes++; + prep_byte_width_lli(&bd, &cctl, bd.remainder, + num_llis++, &total_bytes); } } + if (total_bytes != txd->len) { dev_err(&pl08x->adev->dev, "%s size of encoded lli:s don't match total txd, transferred 0x%08zx from size 0x%08zx\n", @@ -917,9 +845,7 @@ static int prep_phy_channel(struct pl08x_dma_chan *plchan, * need, but for slaves the physical signals may be muxed! * Can the platform allow us to use this channel? */ - if (plchan->slave && - ch->signal < 0 && - pl08x->pd->get_signal) { + if (plchan->slave && pl08x->pd->get_signal) { ret = pl08x->pd->get_signal(plchan); if (ret < 0) { dev_dbg(&pl08x->adev->dev, @@ -1008,10 +934,8 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_interrupt( * If slaves are relying on interrupts to signal completion this function * must not be called with interrupts disabled. */ -static enum dma_status -pl08x_dma_tx_status(struct dma_chan *chan, - dma_cookie_t cookie, - struct dma_tx_state *txstate) +static enum dma_status pl08x_dma_tx_status(struct dma_chan *chan, + dma_cookie_t cookie, struct dma_tx_state *txstate) { struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); dma_cookie_t last_used; @@ -1253,7 +1177,9 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, num_llis = pl08x_fill_llis_for_desc(pl08x, txd); if (!num_llis) { - kfree(txd); + spin_lock_irqsave(&plchan->lock, flags); + pl08x_free_txd(pl08x, txd); + spin_unlock_irqrestore(&plchan->lock, flags); return -EINVAL; } @@ -1301,7 +1227,7 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan, unsigned long flags) { - struct pl08x_txd *txd = kzalloc(sizeof(struct pl08x_txd), GFP_NOWAIT); + struct pl08x_txd *txd = kzalloc(sizeof(*txd), GFP_NOWAIT); if (txd) { dma_async_tx_descriptor_init(&txd->tx, &plchan->chan); @@ -1367,7 +1293,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); struct pl08x_driver_data *pl08x = plchan->host; struct pl08x_txd *txd; - int ret; + int ret, tmp; /* * Current implementation ASSUMES only one sg @@ -1401,12 +1327,10 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( txd->len = sgl->length; if (direction == DMA_TO_DEVICE) { - txd->ccfg |= PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT; txd->cctl = plchan->dst_cctl; txd->src_addr = sgl->dma_address; txd->dst_addr = plchan->dst_addr; } else if (direction == DMA_FROM_DEVICE) { - txd->ccfg |= PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; txd->cctl = plchan->src_cctl; txd->src_addr = plchan->src_addr; txd->dst_addr = sgl->dma_address; @@ -1416,6 +1340,15 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( return NULL; } + if (plchan->cd->device_fc) + tmp = (direction == DMA_TO_DEVICE) ? PL080_FLOW_MEM2PER_PER : + PL080_FLOW_PER2MEM_PER; + else + tmp = (direction == DMA_TO_DEVICE) ? PL080_FLOW_MEM2PER : + PL080_FLOW_PER2MEM; + + txd->ccfg |= tmp << PL080_CONFIG_FLOW_CONTROL_SHIFT; + ret = pl08x_prep_channel_resources(plchan, txd); if (ret) return NULL; @@ -1489,9 +1422,15 @@ static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, bool pl08x_filter_id(struct dma_chan *chan, void *chan_id) { - struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); + struct pl08x_dma_chan *plchan; char *name = chan_id; + /* Reject channels for devices not bound to this driver */ + if (chan->device->dev->driver != &pl08x_amba_driver.drv) + return false; + + plchan = to_pl08x_chan(chan); + /* Check that the channel is not taken! */ if (!strcmp(plchan->name, name)) return true; @@ -1507,13 +1446,7 @@ bool pl08x_filter_id(struct dma_chan *chan, void *chan_id) */ static void pl08x_ensure_on(struct pl08x_driver_data *pl08x) { - u32 val; - - val = readl(pl08x->base + PL080_CONFIG); - val &= ~(PL080_CONFIG_M2_BE | PL080_CONFIG_M1_BE | PL080_CONFIG_ENABLE); - /* We implicitly clear bit 1 and that means little-endian mode */ - val |= PL080_CONFIG_ENABLE; - writel(val, pl08x->base + PL080_CONFIG); + writel(PL080_CONFIG_ENABLE, pl08x->base + PL080_CONFIG); } static void pl08x_unmap_buffers(struct pl08x_txd *txd) @@ -1589,8 +1522,8 @@ static void pl08x_tasklet(unsigned long data) */ list_for_each_entry(waiting, &pl08x->memcpy.channels, chan.device_node) { - if (waiting->state == PL08X_CHAN_WAITING && - waiting->waiting != NULL) { + if (waiting->state == PL08X_CHAN_WAITING && + waiting->waiting != NULL) { int ret; /* This should REALLY not fail now */ @@ -1630,38 +1563,40 @@ static void pl08x_tasklet(unsigned long data) static irqreturn_t pl08x_irq(int irq, void *dev) { struct pl08x_driver_data *pl08x = dev; - u32 mask = 0; - u32 val; - int i; - - val = readl(pl08x->base + PL080_ERR_STATUS); - if (val) { - /* An error interrupt (on one or more channels) */ - dev_err(&pl08x->adev->dev, - "%s error interrupt, register value 0x%08x\n", - __func__, val); - /* - * Simply clear ALL PL08X error interrupts, - * regardless of channel and cause - * FIXME: should be 0x00000003 on PL081 really. - */ - writel(0x000000FF, pl08x->base + PL080_ERR_CLEAR); + u32 mask = 0, err, tc, i; + + /* check & clear - ERR & TC interrupts */ + err = readl(pl08x->base + PL080_ERR_STATUS); + if (err) { + dev_err(&pl08x->adev->dev, "%s error interrupt, register value 0x%08x\n", + __func__, err); + writel(err, pl08x->base + PL080_ERR_CLEAR); } - val = readl(pl08x->base + PL080_INT_STATUS); + tc = readl(pl08x->base + PL080_INT_STATUS); + if (tc) + writel(tc, pl08x->base + PL080_TC_CLEAR); + + if (!err && !tc) + return IRQ_NONE; + for (i = 0; i < pl08x->vd->channels; i++) { - if ((1 << i) & val) { + if (((1 << i) & err) || ((1 << i) & tc)) { /* Locate physical channel */ struct pl08x_phy_chan *phychan = &pl08x->phy_chans[i]; struct pl08x_dma_chan *plchan = phychan->serving; + if (!plchan) { + dev_err(&pl08x->adev->dev, + "%s Error TC interrupt on unused channel: 0x%08x\n", + __func__, i); + continue; + } + /* Schedule tasklet on this channel */ tasklet_schedule(&plchan->tasklet); - mask |= (1 << i); } } - /* Clear only the terminal interrupts on channels we processed */ - writel(mask, pl08x->base + PL080_TC_CLEAR); return mask ? IRQ_HANDLED : IRQ_NONE; } @@ -1685,9 +1620,7 @@ static void pl08x_dma_slave_init(struct pl08x_dma_chan *chan) * Make a local wrapper to hold required data */ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x, - struct dma_device *dmadev, - unsigned int channels, - bool slave) + struct dma_device *dmadev, unsigned int channels, bool slave) { struct pl08x_dma_chan *chan; int i; @@ -1700,7 +1633,7 @@ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x, * to cope with that situation. */ for (i = 0; i < channels; i++) { - chan = kzalloc(sizeof(struct pl08x_dma_chan), GFP_KERNEL); + chan = kzalloc(sizeof(*chan), GFP_KERNEL); if (!chan) { dev_err(&pl08x->adev->dev, "%s no memory for channel\n", __func__); @@ -1728,7 +1661,7 @@ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x, kfree(chan); continue; } - dev_info(&pl08x->adev->dev, + dev_dbg(&pl08x->adev->dev, "initialize virtual channel \"%s\"\n", chan->name); @@ -1837,9 +1770,9 @@ static const struct file_operations pl08x_debugfs_operations = { static void init_pl08x_debugfs(struct pl08x_driver_data *pl08x) { /* Expose a simple debugfs interface to view all clocks */ - (void) debugfs_create_file(dev_name(&pl08x->adev->dev), S_IFREG | S_IRUGO, - NULL, pl08x, - &pl08x_debugfs_operations); + (void) debugfs_create_file(dev_name(&pl08x->adev->dev), + S_IFREG | S_IRUGO, NULL, pl08x, + &pl08x_debugfs_operations); } #else @@ -1860,12 +1793,15 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) return ret; /* Create the driver state holder */ - pl08x = kzalloc(sizeof(struct pl08x_driver_data), GFP_KERNEL); + pl08x = kzalloc(sizeof(*pl08x), GFP_KERNEL); if (!pl08x) { ret = -ENOMEM; goto out_no_pl08x; } + pm_runtime_set_active(&adev->dev); + pm_runtime_enable(&adev->dev); + /* Initialize memcpy engine */ dma_cap_set(DMA_MEMCPY, pl08x->memcpy.cap_mask); pl08x->memcpy.dev = &adev->dev; @@ -1939,7 +1875,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) } /* Initialize physical channels */ - pl08x->phy_chans = kmalloc((vd->channels * sizeof(struct pl08x_phy_chan)), + pl08x->phy_chans = kmalloc((vd->channels * sizeof(*pl08x->phy_chans)), GFP_KERNEL); if (!pl08x->phy_chans) { dev_err(&adev->dev, "%s failed to allocate " @@ -1956,9 +1892,8 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) spin_lock_init(&ch->lock); ch->serving = NULL; ch->signal = -1; - dev_info(&adev->dev, - "physical channel %d is %s\n", i, - pl08x_phy_channel_busy(ch) ? "BUSY" : "FREE"); + dev_dbg(&adev->dev, "physical channel %d is %s\n", + i, pl08x_phy_channel_busy(ch) ? "BUSY" : "FREE"); } /* Register as many memcpy channels as there are physical channels */ @@ -1974,8 +1909,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) /* Register slave channels */ ret = pl08x_dma_init_virtual_channels(pl08x, &pl08x->slave, - pl08x->pd->num_slave_channels, - true); + pl08x->pd->num_slave_channels, true); if (ret <= 0) { dev_warn(&pl08x->adev->dev, "%s failed to enumerate slave channels - %d\n", @@ -2005,6 +1939,8 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) dev_info(&pl08x->adev->dev, "DMA: PL%03x rev%u at 0x%08llx irq %d\n", amba_part(adev), amba_rev(adev), (unsigned long long)adev->res.start, adev->irq[0]); + + pm_runtime_put(&adev->dev); return 0; out_no_slave_reg: @@ -2023,6 +1959,9 @@ out_no_ioremap: dma_pool_destroy(pl08x->pool); out_no_lli_pool: out_no_platdata: + pm_runtime_put(&adev->dev); + pm_runtime_disable(&adev->dev); + kfree(pl08x); out_no_pl08x: amba_release_regions(adev); diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 6a483eac7b3..3b99dc62874 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -107,10 +107,11 @@ static struct at_desc *atc_desc_get(struct at_dma_chan *atchan) { struct at_desc *desc, *_desc; struct at_desc *ret = NULL; + unsigned long flags; unsigned int i = 0; LIST_HEAD(tmp_list); - spin_lock_bh(&atchan->lock); + spin_lock_irqsave(&atchan->lock, flags); list_for_each_entry_safe(desc, _desc, &atchan->free_list, desc_node) { i++; if (async_tx_test_ack(&desc->txd)) { @@ -121,7 +122,7 @@ static struct at_desc *atc_desc_get(struct at_dma_chan *atchan) dev_dbg(chan2dev(&atchan->chan_common), "desc %p not ACKed\n", desc); } - spin_unlock_bh(&atchan->lock); + spin_unlock_irqrestore(&atchan->lock, flags); dev_vdbg(chan2dev(&atchan->chan_common), "scanned %u descriptors on freelist\n", i); @@ -129,9 +130,9 @@ static struct at_desc *atc_desc_get(struct at_dma_chan *atchan) if (!ret) { ret = atc_alloc_descriptor(&atchan->chan_common, GFP_ATOMIC); if (ret) { - spin_lock_bh(&atchan->lock); + spin_lock_irqsave(&atchan->lock, flags); atchan->descs_allocated++; - spin_unlock_bh(&atchan->lock); + spin_unlock_irqrestore(&atchan->lock, flags); } else { dev_err(chan2dev(&atchan->chan_common), "not enough descriptors available\n"); @@ -150,8 +151,9 @@ static void atc_desc_put(struct at_dma_chan *atchan, struct at_desc *desc) { if (desc) { struct at_desc *child; + unsigned long flags; - spin_lock_bh(&atchan->lock); + spin_lock_irqsave(&atchan->lock, flags); list_for_each_entry(child, &desc->tx_list, desc_node) dev_vdbg(chan2dev(&atchan->chan_common), "moving child desc %p to freelist\n", @@ -160,7 +162,7 @@ static void atc_desc_put(struct at_dma_chan *atchan, struct at_desc *desc) dev_vdbg(chan2dev(&atchan->chan_common), "moving desc %p to freelist\n", desc); list_add(&desc->desc_node, &atchan->free_list); - spin_unlock_bh(&atchan->lock); + spin_unlock_irqrestore(&atchan->lock, flags); } } @@ -299,7 +301,7 @@ atc_chain_complete(struct at_dma_chan *atchan, struct at_desc *desc) /* for cyclic transfers, * no need to replay callback function while stopping */ - if (!test_bit(ATC_IS_CYCLIC, &atchan->status)) { + if (!atc_chan_is_cyclic(atchan)) { dma_async_tx_callback callback = txd->callback; void *param = txd->callback_param; @@ -471,16 +473,17 @@ static void atc_handle_cyclic(struct at_dma_chan *atchan) static void atc_tasklet(unsigned long data) { struct at_dma_chan *atchan = (struct at_dma_chan *)data; + unsigned long flags; - spin_lock(&atchan->lock); + spin_lock_irqsave(&atchan->lock, flags); if (test_and_clear_bit(ATC_IS_ERROR, &atchan->status)) atc_handle_error(atchan); - else if (test_bit(ATC_IS_CYCLIC, &atchan->status)) + else if (atc_chan_is_cyclic(atchan)) atc_handle_cyclic(atchan); else atc_advance_work(atchan); - spin_unlock(&atchan->lock); + spin_unlock_irqrestore(&atchan->lock, flags); } static irqreturn_t at_dma_interrupt(int irq, void *dev_id) @@ -539,8 +542,9 @@ static dma_cookie_t atc_tx_submit(struct dma_async_tx_descriptor *tx) struct at_desc *desc = txd_to_at_desc(tx); struct at_dma_chan *atchan = to_at_dma_chan(tx->chan); dma_cookie_t cookie; + unsigned long flags; - spin_lock_bh(&atchan->lock); + spin_lock_irqsave(&atchan->lock, flags); cookie = atc_assign_cookie(atchan, desc); if (list_empty(&atchan->active_list)) { @@ -554,7 +558,7 @@ static dma_cookie_t atc_tx_submit(struct dma_async_tx_descriptor *tx) list_add_tail(&desc->desc_node, &atchan->queue); } - spin_unlock_bh(&atchan->lock); + spin_unlock_irqrestore(&atchan->lock, flags); return cookie; } @@ -927,28 +931,29 @@ static int atc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, struct at_dma_chan *atchan = to_at_dma_chan(chan); struct at_dma *atdma = to_at_dma(chan->device); int chan_id = atchan->chan_common.chan_id; + unsigned long flags; LIST_HEAD(list); dev_vdbg(chan2dev(chan), "atc_control (%d)\n", cmd); if (cmd == DMA_PAUSE) { - spin_lock_bh(&atchan->lock); + spin_lock_irqsave(&atchan->lock, flags); dma_writel(atdma, CHER, AT_DMA_SUSP(chan_id)); set_bit(ATC_IS_PAUSED, &atchan->status); - spin_unlock_bh(&atchan->lock); + spin_unlock_irqrestore(&atchan->lock, flags); } else if (cmd == DMA_RESUME) { - if (!test_bit(ATC_IS_PAUSED, &atchan->status)) + if (!atc_chan_is_paused(atchan)) return 0; - spin_lock_bh(&atchan->lock); + spin_lock_irqsave(&atchan->lock, flags); dma_writel(atdma, CHDR, AT_DMA_RES(chan_id)); clear_bit(ATC_IS_PAUSED, &atchan->status); - spin_unlock_bh(&atchan->lock); + spin_unlock_irqrestore(&atchan->lock, flags); } else if (cmd == DMA_TERMINATE_ALL) { struct at_desc *desc, *_desc; /* @@ -957,7 +962,7 @@ static int atc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, * channel. We still have to poll the channel enable bit due * to AHB/HSB limitations. */ - spin_lock_bh(&atchan->lock); + spin_lock_irqsave(&atchan->lock, flags); /* disabling channel: must also remove suspend state */ dma_writel(atdma, CHDR, AT_DMA_RES(chan_id) | atchan->mask); @@ -978,7 +983,7 @@ static int atc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, /* if channel dedicated to cyclic operations, free it */ clear_bit(ATC_IS_CYCLIC, &atchan->status); - spin_unlock_bh(&atchan->lock); + spin_unlock_irqrestore(&atchan->lock, flags); } else { return -ENXIO; } @@ -1004,9 +1009,10 @@ atc_tx_status(struct dma_chan *chan, struct at_dma_chan *atchan = to_at_dma_chan(chan); dma_cookie_t last_used; dma_cookie_t last_complete; + unsigned long flags; enum dma_status ret; - spin_lock_bh(&atchan->lock); + spin_lock_irqsave(&atchan->lock, flags); last_complete = atchan->completed_cookie; last_used = chan->cookie; @@ -1021,7 +1027,7 @@ atc_tx_status(struct dma_chan *chan, ret = dma_async_is_complete(cookie, last_complete, last_used); } - spin_unlock_bh(&atchan->lock); + spin_unlock_irqrestore(&atchan->lock, flags); if (ret != DMA_SUCCESS) dma_set_tx_state(txstate, last_complete, last_used, @@ -1029,7 +1035,7 @@ atc_tx_status(struct dma_chan *chan, else dma_set_tx_state(txstate, last_complete, last_used, 0); - if (test_bit(ATC_IS_PAUSED, &atchan->status)) + if (atc_chan_is_paused(atchan)) ret = DMA_PAUSED; dev_vdbg(chan2dev(chan), "tx_status %d: cookie = %d (d%d, u%d)\n", @@ -1046,18 +1052,19 @@ atc_tx_status(struct dma_chan *chan, static void atc_issue_pending(struct dma_chan *chan) { struct at_dma_chan *atchan = to_at_dma_chan(chan); + unsigned long flags; dev_vdbg(chan2dev(chan), "issue_pending\n"); /* Not needed for cyclic transfers */ - if (test_bit(ATC_IS_CYCLIC, &atchan->status)) + if (atc_chan_is_cyclic(atchan)) return; - spin_lock_bh(&atchan->lock); + spin_lock_irqsave(&atchan->lock, flags); if (!atc_chan_is_enabled(atchan)) { atc_advance_work(atchan); } - spin_unlock_bh(&atchan->lock); + spin_unlock_irqrestore(&atchan->lock, flags); } /** @@ -1073,6 +1080,7 @@ static int atc_alloc_chan_resources(struct dma_chan *chan) struct at_dma *atdma = to_at_dma(chan->device); struct at_desc *desc; struct at_dma_slave *atslave; + unsigned long flags; int i; u32 cfg; LIST_HEAD(tmp_list); @@ -1116,11 +1124,11 @@ static int atc_alloc_chan_resources(struct dma_chan *chan) list_add_tail(&desc->desc_node, &tmp_list); } - spin_lock_bh(&atchan->lock); + spin_lock_irqsave(&atchan->lock, flags); atchan->descs_allocated = i; list_splice(&tmp_list, &atchan->free_list); atchan->completed_cookie = chan->cookie = 1; - spin_unlock_bh(&atchan->lock); + spin_unlock_irqrestore(&atchan->lock, flags); /* channel parameters */ channel_writel(atchan, CFG, cfg); @@ -1293,15 +1301,13 @@ static int __init at_dma_probe(struct platform_device *pdev) if (dma_has_cap(DMA_MEMCPY, atdma->dma_common.cap_mask)) atdma->dma_common.device_prep_dma_memcpy = atc_prep_dma_memcpy; - if (dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask)) + if (dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask)) { atdma->dma_common.device_prep_slave_sg = atc_prep_slave_sg; - - if (dma_has_cap(DMA_CYCLIC, atdma->dma_common.cap_mask)) + /* controller can do slave DMA: can trigger cyclic transfers */ + dma_cap_set(DMA_CYCLIC, atdma->dma_common.cap_mask); atdma->dma_common.device_prep_dma_cyclic = atc_prep_dma_cyclic; - - if (dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask) || - dma_has_cap(DMA_CYCLIC, atdma->dma_common.cap_mask)) atdma->dma_common.device_control = atc_control; + } dma_writel(atdma, EN, AT_DMA_ENABLE); @@ -1377,27 +1383,112 @@ static void at_dma_shutdown(struct platform_device *pdev) clk_disable(atdma->clk); } +static int at_dma_prepare(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct at_dma *atdma = platform_get_drvdata(pdev); + struct dma_chan *chan, *_chan; + + list_for_each_entry_safe(chan, _chan, &atdma->dma_common.channels, + device_node) { + struct at_dma_chan *atchan = to_at_dma_chan(chan); + /* wait for transaction completion (except in cyclic case) */ + if (atc_chan_is_enabled(atchan) && !atc_chan_is_cyclic(atchan)) + return -EAGAIN; + } + return 0; +} + +static void atc_suspend_cyclic(struct at_dma_chan *atchan) +{ + struct dma_chan *chan = &atchan->chan_common; + + /* Channel should be paused by user + * do it anyway even if it is not done already */ + if (!atc_chan_is_paused(atchan)) { + dev_warn(chan2dev(chan), + "cyclic channel not paused, should be done by channel user\n"); + atc_control(chan, DMA_PAUSE, 0); + } + + /* now preserve additional data for cyclic operations */ + /* next descriptor address in the cyclic list */ + atchan->save_dscr = channel_readl(atchan, DSCR); + + vdbg_dump_regs(atchan); +} + static int at_dma_suspend_noirq(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct at_dma *atdma = platform_get_drvdata(pdev); + struct dma_chan *chan, *_chan; - at_dma_off(platform_get_drvdata(pdev)); + /* preserve data */ + list_for_each_entry_safe(chan, _chan, &atdma->dma_common.channels, + device_node) { + struct at_dma_chan *atchan = to_at_dma_chan(chan); + + if (atc_chan_is_cyclic(atchan)) + atc_suspend_cyclic(atchan); + atchan->save_cfg = channel_readl(atchan, CFG); + } + atdma->save_imr = dma_readl(atdma, EBCIMR); + + /* disable DMA controller */ + at_dma_off(atdma); clk_disable(atdma->clk); return 0; } +static void atc_resume_cyclic(struct at_dma_chan *atchan) +{ + struct at_dma *atdma = to_at_dma(atchan->chan_common.device); + + /* restore channel status for cyclic descriptors list: + * next descriptor in the cyclic list at the time of suspend */ + channel_writel(atchan, SADDR, 0); + channel_writel(atchan, DADDR, 0); + channel_writel(atchan, CTRLA, 0); + channel_writel(atchan, CTRLB, 0); + channel_writel(atchan, DSCR, atchan->save_dscr); + dma_writel(atdma, CHER, atchan->mask); + + /* channel pause status should be removed by channel user + * We cannot take the initiative to do it here */ + + vdbg_dump_regs(atchan); +} + static int at_dma_resume_noirq(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct at_dma *atdma = platform_get_drvdata(pdev); + struct dma_chan *chan, *_chan; + /* bring back DMA controller */ clk_enable(atdma->clk); dma_writel(atdma, EN, AT_DMA_ENABLE); + + /* clear any pending interrupt */ + while (dma_readl(atdma, EBCISR)) + cpu_relax(); + + /* restore saved data */ + dma_writel(atdma, EBCIER, atdma->save_imr); + list_for_each_entry_safe(chan, _chan, &atdma->dma_common.channels, + device_node) { + struct at_dma_chan *atchan = to_at_dma_chan(chan); + + channel_writel(atchan, CFG, atchan->save_cfg); + if (atc_chan_is_cyclic(atchan)) + atc_resume_cyclic(atchan); + } return 0; } static const struct dev_pm_ops at_dma_dev_pm_ops = { + .prepare = at_dma_prepare, .suspend_noirq = at_dma_suspend_noirq, .resume_noirq = at_dma_resume_noirq, }; diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h index 087dbf1dd39..aa4c9aebab7 100644 --- a/drivers/dma/at_hdmac_regs.h +++ b/drivers/dma/at_hdmac_regs.h @@ -204,6 +204,9 @@ enum atc_status { * @status: transmit status information from irq/prep* functions * to tasklet (use atomic operations) * @tasklet: bottom half to finish transaction work + * @save_cfg: configuration register that is saved on suspend/resume cycle + * @save_dscr: for cyclic operations, preserve next descriptor address in + * the cyclic list on suspend/resume cycle * @lock: serializes enqueue/dequeue operations to descriptors lists * @completed_cookie: identifier for the most recently completed operation * @active_list: list of descriptors dmaengine is being running on @@ -218,6 +221,8 @@ struct at_dma_chan { u8 mask; unsigned long status; struct tasklet_struct tasklet; + u32 save_cfg; + u32 save_dscr; spinlock_t lock; @@ -248,6 +253,7 @@ static inline struct at_dma_chan *to_at_dma_chan(struct dma_chan *dchan) * @chan_common: common dmaengine dma_device object members * @ch_regs: memory mapped register base * @clk: dma controller clock + * @save_imr: interrupt mask register that is saved on suspend/resume cycle * @all_chan_mask: all channels availlable in a mask * @dma_desc_pool: base of DMA descriptor region (DMA address) * @chan: channels table to store at_dma_chan structures @@ -256,6 +262,7 @@ struct at_dma { struct dma_device dma_common; void __iomem *regs; struct clk *clk; + u32 save_imr; u8 all_chan_mask; @@ -355,6 +362,23 @@ static inline int atc_chan_is_enabled(struct at_dma_chan *atchan) return !!(dma_readl(atdma, CHSR) & atchan->mask); } +/** + * atc_chan_is_paused - test channel pause/resume status + * @atchan: channel we want to test status + */ +static inline int atc_chan_is_paused(struct at_dma_chan *atchan) +{ + return test_bit(ATC_IS_PAUSED, &atchan->status); +} + +/** + * atc_chan_is_cyclic - test if given channel has cyclic property set + * @atchan: channel we want to test status + */ +static inline int atc_chan_is_cyclic(struct at_dma_chan *atchan) +{ + return test_bit(ATC_IS_CYCLIC, &atchan->status); +} /** * set_desc_eol - set end-of-link to descriptor so it will end transfer diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index 765f5ff2230..eb1d8641cf5 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -10,6 +10,7 @@ #include <linux/delay.h> #include <linux/dma-mapping.h> #include <linux/dmaengine.h> +#include <linux/freezer.h> #include <linux/init.h> #include <linux/kthread.h> #include <linux/module.h> @@ -251,6 +252,7 @@ static int dmatest_func(void *data) int i; thread_name = current->comm; + set_freezable_with_signal(); ret = -ENOMEM; @@ -305,7 +307,8 @@ static int dmatest_func(void *data) dma_addr_t dma_srcs[src_cnt]; dma_addr_t dma_dsts[dst_cnt]; struct completion cmp; - unsigned long tmo = msecs_to_jiffies(timeout); + unsigned long start, tmo, end = 0 /* compiler... */; + bool reload = true; u8 align = 0; total_tests++; @@ -404,7 +407,17 @@ static int dmatest_func(void *data) } dma_async_issue_pending(chan); - tmo = wait_for_completion_timeout(&cmp, tmo); + do { + start = jiffies; + if (reload) + end = start + msecs_to_jiffies(timeout); + else if (end <= start) + end = start + 1; + tmo = wait_for_completion_interruptible_timeout(&cmp, + end - start); + reload = try_to_freeze(); + } while (tmo == -ERESTARTSYS); + status = dma_async_is_tx_complete(chan, cookie, NULL, NULL); if (tmo == 0) { @@ -477,6 +490,8 @@ err_srcs: pr_notice("%s: terminating after %u tests, %u failures (status %d)\n", thread_name, total_tests, failed_tests, ret); + /* terminate all transfers on specified channels */ + chan->device->device_control(chan, DMA_TERMINATE_ALL, 0); if (iterations > 0) while (!kthread_should_stop()) { DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wait_dmatest_exit); @@ -499,6 +514,10 @@ static void dmatest_cleanup_channel(struct dmatest_chan *dtc) list_del(&thread->node); kfree(thread); } + + /* terminate all transfers on specified channels */ + dtc->chan->device->device_control(dtc->chan, DMA_TERMINATE_ALL, 0); + kfree(dtc); } diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index 7bd7e98548c..b5cc27dc9a5 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -318,6 +318,7 @@ struct sdma_engine { dma_addr_t context_phys; struct dma_device dma_device; struct clk *clk; + struct mutex channel_0_lock; struct sdma_script_start_addrs *script_addrs; }; @@ -415,11 +416,15 @@ static int sdma_load_script(struct sdma_engine *sdma, void *buf, int size, dma_addr_t buf_phys; int ret; + mutex_lock(&sdma->channel_0_lock); + buf_virt = dma_alloc_coherent(NULL, size, &buf_phys, GFP_KERNEL); - if (!buf_virt) - return -ENOMEM; + if (!buf_virt) { + ret = -ENOMEM; + goto err_out; + } bd0->mode.command = C0_SETPM; bd0->mode.status = BD_DONE | BD_INTR | BD_WRAP | BD_EXTD; @@ -433,6 +438,9 @@ static int sdma_load_script(struct sdma_engine *sdma, void *buf, int size, dma_free_coherent(NULL, size, buf_virt, buf_phys); +err_out: + mutex_unlock(&sdma->channel_0_lock); + return ret; } @@ -656,6 +664,8 @@ static int sdma_load_context(struct sdma_channel *sdmac) dev_dbg(sdma->dev, "event_mask0 = 0x%08x\n", sdmac->event_mask0); dev_dbg(sdma->dev, "event_mask1 = 0x%08x\n", sdmac->event_mask1); + mutex_lock(&sdma->channel_0_lock); + memset(context, 0, sizeof(*context)); context->channel_state.pc = load_address; @@ -676,6 +686,8 @@ static int sdma_load_context(struct sdma_channel *sdmac) ret = sdma_run_channel(&sdma->channel[0]); + mutex_unlock(&sdma->channel_0_lock); + return ret; } @@ -1131,18 +1143,17 @@ static void sdma_add_scripts(struct sdma_engine *sdma, saddr_arr[i] = addr_arr[i]; } -static int __init sdma_get_firmware(struct sdma_engine *sdma, - const char *fw_name) +static void sdma_load_firmware(const struct firmware *fw, void *context) { - const struct firmware *fw; + struct sdma_engine *sdma = context; const struct sdma_firmware_header *header; - int ret; const struct sdma_script_start_addrs *addr; unsigned short *ram_code; - ret = request_firmware(&fw, fw_name, sdma->dev); - if (ret) - return ret; + if (!fw) { + dev_err(sdma->dev, "firmware not found\n"); + return; + } if (fw->size < sizeof(*header)) goto err_firmware; @@ -1172,6 +1183,16 @@ static int __init sdma_get_firmware(struct sdma_engine *sdma, err_firmware: release_firmware(fw); +} + +static int __init sdma_get_firmware(struct sdma_engine *sdma, + const char *fw_name) +{ + int ret; + + ret = request_firmware_nowait(THIS_MODULE, + FW_ACTION_HOTPLUG, fw_name, sdma->dev, + GFP_KERNEL, sdma, sdma_load_firmware); return ret; } @@ -1269,11 +1290,14 @@ static int __init sdma_probe(struct platform_device *pdev) struct sdma_platform_data *pdata = pdev->dev.platform_data; int i; struct sdma_engine *sdma; + s32 *saddr_arr; sdma = kzalloc(sizeof(*sdma), GFP_KERNEL); if (!sdma) return -ENOMEM; + mutex_init(&sdma->channel_0_lock); + sdma->dev = &pdev->dev; iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -1310,6 +1334,11 @@ static int __init sdma_probe(struct platform_device *pdev) goto err_alloc; } + /* initially no scripts available */ + saddr_arr = (s32 *)sdma->script_addrs; + for (i = 0; i < SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1; i++) + saddr_arr[i] = -EINVAL; + if (of_id) pdev->id_entry = of_id->data; sdma->devtype = pdev->id_entry->driver_data; diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c index be641cbd36f..b4588bdd98b 100644 --- a/drivers/dma/mxs-dma.c +++ b/drivers/dma/mxs-dma.c @@ -130,6 +130,23 @@ struct mxs_dma_engine { struct mxs_dma_chan mxs_chans[MXS_DMA_CHANNELS]; }; +static inline void mxs_dma_clkgate(struct mxs_dma_chan *mxs_chan, int enable) +{ + struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma; + int chan_id = mxs_chan->chan.chan_id; + int set_clr = enable ? MXS_CLR_ADDR : MXS_SET_ADDR; + + /* enable apbh channel clock */ + if (dma_is_apbh()) { + if (apbh_is_old()) + writel(1 << (chan_id + BP_APBH_CTRL0_CLKGATE_CHANNEL), + mxs_dma->base + HW_APBHX_CTRL0 + set_clr); + else + writel(1 << chan_id, + mxs_dma->base + HW_APBHX_CTRL0 + set_clr); + } +} + static void mxs_dma_reset_chan(struct mxs_dma_chan *mxs_chan) { struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma; @@ -148,38 +165,21 @@ static void mxs_dma_enable_chan(struct mxs_dma_chan *mxs_chan) struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma; int chan_id = mxs_chan->chan.chan_id; + /* clkgate needs to be enabled before writing other registers */ + mxs_dma_clkgate(mxs_chan, 1); + /* set cmd_addr up */ writel(mxs_chan->ccw_phys, mxs_dma->base + HW_APBHX_CHn_NXTCMDAR(chan_id)); - /* enable apbh channel clock */ - if (dma_is_apbh()) { - if (apbh_is_old()) - writel(1 << (chan_id + BP_APBH_CTRL0_CLKGATE_CHANNEL), - mxs_dma->base + HW_APBHX_CTRL0 + MXS_CLR_ADDR); - else - writel(1 << chan_id, - mxs_dma->base + HW_APBHX_CTRL0 + MXS_CLR_ADDR); - } - /* write 1 to SEMA to kick off the channel */ writel(1, mxs_dma->base + HW_APBHX_CHn_SEMA(chan_id)); } static void mxs_dma_disable_chan(struct mxs_dma_chan *mxs_chan) { - struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma; - int chan_id = mxs_chan->chan.chan_id; - /* disable apbh channel clock */ - if (dma_is_apbh()) { - if (apbh_is_old()) - writel(1 << (chan_id + BP_APBH_CTRL0_CLKGATE_CHANNEL), - mxs_dma->base + HW_APBHX_CTRL0 + MXS_SET_ADDR); - else - writel(1 << chan_id, - mxs_dma->base + HW_APBHX_CTRL0 + MXS_SET_ADDR); - } + mxs_dma_clkgate(mxs_chan, 0); mxs_chan->status = DMA_SUCCESS; } @@ -338,7 +338,10 @@ static int mxs_dma_alloc_chan_resources(struct dma_chan *chan) if (ret) goto err_clk; + /* clkgate needs to be enabled for reset to finish */ + mxs_dma_clkgate(mxs_chan, 1); mxs_dma_reset_chan(mxs_chan); + mxs_dma_clkgate(mxs_chan, 0); dma_async_tx_descriptor_init(&mxs_chan->desc, chan); mxs_chan->desc.tx_submit = mxs_dma_tx_submit; diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index 00eee59e8b3..621134fdba4 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -17,6 +17,8 @@ #include <linux/interrupt.h> #include <linux/amba/bus.h> #include <linux/amba/pl330.h> +#include <linux/pm_runtime.h> +#include <linux/scatterlist.h> #define NR_DEFAULT_DESC 16 @@ -68,6 +70,14 @@ struct dma_pl330_chan { * NULL if the channel is available to be acquired. */ void *pl330_chid; + + /* For D-to-M and M-to-D channels */ + int burst_sz; /* the peripheral fifo width */ + int burst_len; /* the number of burst */ + dma_addr_t fifo_addr; + + /* for cyclic capability */ + bool cyclic; }; struct dma_pl330_dmac { @@ -83,6 +93,8 @@ struct dma_pl330_dmac { /* Peripheral channels connected to this DMAC */ struct dma_pl330_chan *peripherals; /* keep at end */ + + struct clk *clk; }; struct dma_pl330_desc { @@ -152,6 +164,31 @@ static inline void free_desc_list(struct list_head *list) spin_unlock_irqrestore(&pdmac->pool_lock, flags); } +static inline void handle_cyclic_desc_list(struct list_head *list) +{ + struct dma_pl330_desc *desc; + struct dma_pl330_chan *pch; + unsigned long flags; + + if (list_empty(list)) + return; + + list_for_each_entry(desc, list, node) { + dma_async_tx_callback callback; + + /* Change status to reload it */ + desc->status = PREP; + pch = desc->pchan; + callback = desc->txd.callback; + if (callback) + callback(desc->txd.callback_param); + } + + spin_lock_irqsave(&pch->lock, flags); + list_splice_tail_init(list, &pch->work_list); + spin_unlock_irqrestore(&pch->lock, flags); +} + static inline void fill_queue(struct dma_pl330_chan *pch) { struct dma_pl330_desc *desc; @@ -205,7 +242,10 @@ static void pl330_tasklet(unsigned long data) spin_unlock_irqrestore(&pch->lock, flags); - free_desc_list(&list); + if (pch->cyclic) + handle_cyclic_desc_list(&list); + else + free_desc_list(&list); } static void dma_pl330_rqcb(void *token, enum pl330_op_err err) @@ -236,6 +276,7 @@ static int pl330_alloc_chan_resources(struct dma_chan *chan) spin_lock_irqsave(&pch->lock, flags); pch->completed = chan->cookie = 1; + pch->cyclic = false; pch->pl330_chid = pl330_request_channel(&pdmac->pif); if (!pch->pl330_chid) { @@ -253,25 +294,52 @@ static int pl330_alloc_chan_resources(struct dma_chan *chan) static int pl330_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned long arg) { struct dma_pl330_chan *pch = to_pchan(chan); - struct dma_pl330_desc *desc; + struct dma_pl330_desc *desc, *_dt; unsigned long flags; + struct dma_pl330_dmac *pdmac = pch->dmac; + struct dma_slave_config *slave_config; + LIST_HEAD(list); - /* Only supports DMA_TERMINATE_ALL */ - if (cmd != DMA_TERMINATE_ALL) - return -ENXIO; - - spin_lock_irqsave(&pch->lock, flags); - - /* FLUSH the PL330 Channel thread */ - pl330_chan_ctrl(pch->pl330_chid, PL330_OP_FLUSH); + switch (cmd) { + case DMA_TERMINATE_ALL: + spin_lock_irqsave(&pch->lock, flags); - /* Mark all desc done */ - list_for_each_entry(desc, &pch->work_list, node) - desc->status = DONE; + /* FLUSH the PL330 Channel thread */ + pl330_chan_ctrl(pch->pl330_chid, PL330_OP_FLUSH); - spin_unlock_irqrestore(&pch->lock, flags); + /* Mark all desc done */ + list_for_each_entry_safe(desc, _dt, &pch->work_list , node) { + desc->status = DONE; + pch->completed = desc->txd.cookie; + list_move_tail(&desc->node, &list); + } - pl330_tasklet((unsigned long) pch); + list_splice_tail_init(&list, &pdmac->desc_pool); + spin_unlock_irqrestore(&pch->lock, flags); + break; + case DMA_SLAVE_CONFIG: + slave_config = (struct dma_slave_config *)arg; + + if (slave_config->direction == DMA_TO_DEVICE) { + if (slave_config->dst_addr) + pch->fifo_addr = slave_config->dst_addr; + if (slave_config->dst_addr_width) + pch->burst_sz = __ffs(slave_config->dst_addr_width); + if (slave_config->dst_maxburst) + pch->burst_len = slave_config->dst_maxburst; + } else if (slave_config->direction == DMA_FROM_DEVICE) { + if (slave_config->src_addr) + pch->fifo_addr = slave_config->src_addr; + if (slave_config->src_addr_width) + pch->burst_sz = __ffs(slave_config->src_addr_width); + if (slave_config->src_maxburst) + pch->burst_len = slave_config->src_maxburst; + } + break; + default: + dev_err(pch->dmac->pif.dev, "Not supported command.\n"); + return -ENXIO; + } return 0; } @@ -288,6 +356,9 @@ static void pl330_free_chan_resources(struct dma_chan *chan) pl330_release_channel(pch->pl330_chid); pch->pl330_chid = NULL; + if (pch->cyclic) + list_splice_tail_init(&pch->work_list, &pch->dmac->desc_pool); + spin_unlock_irqrestore(&pch->lock, flags); } @@ -453,7 +524,7 @@ static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch) if (peri) { desc->req.rqtype = peri->rqtype; - desc->req.peri = peri->peri_id; + desc->req.peri = pch->chan.chan_id; } else { desc->req.rqtype = MEMTOMEM; desc->req.peri = 0; @@ -524,6 +595,51 @@ static inline int get_burst_len(struct dma_pl330_desc *desc, size_t len) return burst_len; } +static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic( + struct dma_chan *chan, dma_addr_t dma_addr, size_t len, + size_t period_len, enum dma_data_direction direction) +{ + struct dma_pl330_desc *desc; + struct dma_pl330_chan *pch = to_pchan(chan); + dma_addr_t dst; + dma_addr_t src; + + desc = pl330_get_desc(pch); + if (!desc) { + dev_err(pch->dmac->pif.dev, "%s:%d Unable to fetch desc\n", + __func__, __LINE__); + return NULL; + } + + switch (direction) { + case DMA_TO_DEVICE: + desc->rqcfg.src_inc = 1; + desc->rqcfg.dst_inc = 0; + src = dma_addr; + dst = pch->fifo_addr; + break; + case DMA_FROM_DEVICE: + desc->rqcfg.src_inc = 0; + desc->rqcfg.dst_inc = 1; + src = pch->fifo_addr; + dst = dma_addr; + break; + default: + dev_err(pch->dmac->pif.dev, "%s:%d Invalid dma direction\n", + __func__, __LINE__); + return NULL; + } + + desc->rqcfg.brst_size = pch->burst_sz; + desc->rqcfg.brst_len = 1; + + pch->cyclic = true; + + fill_px(&desc->px, dst, src, period_len); + + return &desc->txd; +} + static struct dma_async_tx_descriptor * pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst, dma_addr_t src, size_t len, unsigned long flags) @@ -579,7 +695,7 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, struct dma_pl330_peri *peri = chan->private; struct scatterlist *sg; unsigned long flags; - int i, burst_size; + int i; dma_addr_t addr; if (unlikely(!pch || !sgl || !sg_len || !peri)) @@ -595,8 +711,7 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, return NULL; } - addr = peri->fifo_addr; - burst_size = peri->burst_sz; + addr = pch->fifo_addr; first = NULL; @@ -644,7 +759,7 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, sg_dma_address(sg), addr, sg_dma_len(sg)); } - desc->rqcfg.brst_size = burst_size; + desc->rqcfg.brst_size = pch->burst_sz; desc->rqcfg.brst_len = 1; } @@ -696,6 +811,30 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) goto probe_err1; } + pdmac->clk = clk_get(&adev->dev, "dma"); + if (IS_ERR(pdmac->clk)) { + dev_err(&adev->dev, "Cannot get operation clock.\n"); + ret = -EINVAL; + goto probe_err1; + } + + amba_set_drvdata(adev, pdmac); + +#ifdef CONFIG_PM_RUNTIME + /* to use the runtime PM helper functions */ + pm_runtime_enable(&adev->dev); + + /* enable the power domain */ + if (pm_runtime_get_sync(&adev->dev)) { + dev_err(&adev->dev, "failed to get runtime pm\n"); + ret = -ENODEV; + goto probe_err1; + } +#else + /* enable dma clk */ + clk_enable(pdmac->clk); +#endif + irq = adev->irq[0]; ret = request_irq(irq, pl330_irq_handler, 0, dev_name(&adev->dev), pi); @@ -732,6 +871,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) case MEMTODEV: case DEVTOMEM: dma_cap_set(DMA_SLAVE, pd->cap_mask); + dma_cap_set(DMA_CYCLIC, pd->cap_mask); break; default: dev_err(&adev->dev, "DEVTODEV Not Supported\n"); @@ -760,6 +900,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) pd->device_alloc_chan_resources = pl330_alloc_chan_resources; pd->device_free_chan_resources = pl330_free_chan_resources; pd->device_prep_dma_memcpy = pl330_prep_dma_memcpy; + pd->device_prep_dma_cyclic = pl330_prep_dma_cyclic; pd->device_tx_status = pl330_tx_status; pd->device_prep_slave_sg = pl330_prep_slave_sg; pd->device_control = pl330_control; @@ -771,8 +912,6 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) goto probe_err4; } - amba_set_drvdata(adev, pdmac); - dev_info(&adev->dev, "Loaded driver for PL330 DMAC-%d\n", adev->periphid); dev_info(&adev->dev, @@ -833,6 +972,13 @@ static int __devexit pl330_remove(struct amba_device *adev) res = &adev->res; release_mem_region(res->start, resource_size(res)); +#ifdef CONFIG_PM_RUNTIME + pm_runtime_put(&adev->dev); + pm_runtime_disable(&adev->dev); +#else + clk_disable(pdmac->clk); +#endif + kfree(pdmac); return 0; @@ -846,10 +992,49 @@ static struct amba_id pl330_ids[] = { { 0, 0 }, }; +#ifdef CONFIG_PM_RUNTIME +static int pl330_runtime_suspend(struct device *dev) +{ + struct dma_pl330_dmac *pdmac = dev_get_drvdata(dev); + + if (!pdmac) { + dev_err(dev, "failed to get dmac\n"); + return -ENODEV; + } + + clk_disable(pdmac->clk); + + return 0; +} + +static int pl330_runtime_resume(struct device *dev) +{ + struct dma_pl330_dmac *pdmac = dev_get_drvdata(dev); + + if (!pdmac) { + dev_err(dev, "failed to get dmac\n"); + return -ENODEV; + } + + clk_enable(pdmac->clk); + + return 0; +} +#else +#define pl330_runtime_suspend NULL +#define pl330_runtime_resume NULL +#endif /* CONFIG_PM_RUNTIME */ + +static const struct dev_pm_ops pl330_pm_ops = { + .runtime_suspend = pl330_runtime_suspend, + .runtime_resume = pl330_runtime_resume, +}; + static struct amba_driver pl330_driver = { .drv = { .owner = THIS_MODULE, .name = "dma-pl330", + .pm = &pl330_pm_ops, }, .id_table = pl330_ids, .probe = pl330_probe, diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index cd3a7c726bf..467e4dcb20a 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -174,8 +174,10 @@ struct d40_base; * @tasklet: Tasklet that gets scheduled from interrupt context to complete a * transfer and call client callback. * @client: Cliented owned descriptor list. + * @pending_queue: Submitted jobs, to be issued by issue_pending() * @active: Active descriptor. * @queue: Queued jobs. + * @prepare_queue: Prepared jobs. * @dma_cfg: The client configuration of this dma channel. * @configured: whether the dma_cfg configuration is valid * @base: Pointer to the device instance struct. @@ -203,6 +205,7 @@ struct d40_chan { struct list_head pending_queue; struct list_head active; struct list_head queue; + struct list_head prepare_queue; struct stedma40_chan_cfg dma_cfg; bool configured; struct d40_base *base; @@ -477,7 +480,6 @@ static struct d40_desc *d40_desc_get(struct d40_chan *d40c) list_for_each_entry_safe(d, _d, &d40c->client, node) if (async_tx_test_ack(&d->txd)) { - d40_pool_lli_free(d40c, d); d40_desc_remove(d); desc = d; memset(desc, 0, sizeof(*desc)); @@ -644,8 +646,11 @@ static struct d40_desc *d40_first_active_get(struct d40_chan *d40c) return d; } +/* remove desc from current queue and add it to the pending_queue */ static void d40_desc_queue(struct d40_chan *d40c, struct d40_desc *desc) { + d40_desc_remove(desc); + desc->is_in_client_list = false; list_add_tail(&desc->node, &d40c->pending_queue); } @@ -803,6 +808,7 @@ done: static void d40_term_all(struct d40_chan *d40c) { struct d40_desc *d40d; + struct d40_desc *_d; /* Release active descriptors */ while ((d40d = d40_first_active_get(d40c))) { @@ -822,6 +828,21 @@ static void d40_term_all(struct d40_chan *d40c) d40_desc_free(d40c, d40d); } + /* Release client owned descriptors */ + if (!list_empty(&d40c->client)) + list_for_each_entry_safe(d40d, _d, &d40c->client, node) { + d40_desc_remove(d40d); + d40_desc_free(d40c, d40d); + } + + /* Release descriptors in prepare queue */ + if (!list_empty(&d40c->prepare_queue)) + list_for_each_entry_safe(d40d, _d, + &d40c->prepare_queue, node) { + d40_desc_remove(d40d); + d40_desc_free(d40c, d40d); + } + d40c->pending_tx = 0; d40c->busy = false; } @@ -1208,7 +1229,6 @@ static void dma_tasklet(unsigned long data) if (!d40d->cyclic) { if (async_tx_test_ack(&d40d->txd)) { - d40_pool_lli_free(d40c, d40d); d40_desc_remove(d40d); d40_desc_free(d40c, d40d); } else { @@ -1595,21 +1615,10 @@ static int d40_free_dma(struct d40_chan *d40c) u32 event; struct d40_phy_res *phy = d40c->phy_chan; bool is_src; - struct d40_desc *d; - struct d40_desc *_d; - /* Terminate all queued and active transfers */ d40_term_all(d40c); - /* Release client owned descriptors */ - if (!list_empty(&d40c->client)) - list_for_each_entry_safe(d, _d, &d40c->client, node) { - d40_pool_lli_free(d40c, d); - d40_desc_remove(d); - d40_desc_free(d40c, d); - } - if (phy == NULL) { chan_err(d40c, "phy == null\n"); return -EINVAL; @@ -1911,6 +1920,12 @@ d40_prep_sg(struct dma_chan *dchan, struct scatterlist *sg_src, goto err; } + /* + * add descriptor to the prepare queue in order to be able + * to free them later in terminate_all + */ + list_add_tail(&desc->node, &chan->prepare_queue); + spin_unlock_irqrestore(&chan->lock, flags); return &desc->txd; @@ -2400,6 +2415,7 @@ static void __init d40_chan_init(struct d40_base *base, struct dma_device *dma, INIT_LIST_HEAD(&d40c->queue); INIT_LIST_HEAD(&d40c->pending_queue); INIT_LIST_HEAD(&d40c->client); + INIT_LIST_HEAD(&d40c->prepare_queue); tasklet_init(&d40c->tasklet, dma_tasklet, (unsigned long) d40c); diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c index 57cd3a406ed..fd7170a9ad2 100644 --- a/drivers/firewire/ohci.c +++ b/drivers/firewire/ohci.c @@ -290,6 +290,9 @@ static const struct { {PCI_VENDOR_ID_NEC, PCI_ANY_ID, PCI_ANY_ID, QUIRK_CYCLE_TIMER}, + {PCI_VENDOR_ID_O2, PCI_ANY_ID, PCI_ANY_ID, + QUIRK_NO_MSI}, + {PCI_VENDOR_ID_RICOH, PCI_ANY_ID, PCI_ANY_ID, QUIRK_CYCLE_TIMER}, diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c index 41841a3e3f9..17cef864506 100644 --- a/drivers/firewire/sbp2.c +++ b/drivers/firewire/sbp2.c @@ -1198,6 +1198,10 @@ static int sbp2_remove(struct device *dev) { struct fw_unit *unit = fw_unit(dev); struct sbp2_target *tgt = dev_get_drvdata(&unit->device); + struct sbp2_logical_unit *lu; + + list_for_each_entry(lu, &tgt->lu_list, link) + cancel_delayed_work_sync(&lu->work); sbp2_target_put(tgt); return 0; diff --git a/drivers/firmware/google/gsmi.c b/drivers/firmware/google/gsmi.c index 68810fd1a59..aa83de9db1b 100644 --- a/drivers/firmware/google/gsmi.c +++ b/drivers/firmware/google/gsmi.c @@ -420,7 +420,7 @@ static efi_status_t gsmi_get_next_variable(unsigned long *name_size, static efi_status_t gsmi_set_variable(efi_char16_t *name, efi_guid_t *vendor, - unsigned long attr, + u32 attr, unsigned long data_size, void *data) { diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index d539efd96d4..ca44d2cceb0 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -95,10 +95,6 @@ config GPIO_EP93XX depends on ARCH_EP93XX select GPIO_GENERIC -config GPIO_EXYNOS4 - def_bool y - depends on CPU_EXYNOS4210 - config GPIO_MPC5200 def_bool y depends on PPC_MPC52xx @@ -131,18 +127,6 @@ config GPIO_MXS select GPIO_GENERIC select GENERIC_IRQ_CHIP -config GPIO_PLAT_SAMSUNG - def_bool y - depends on SAMSUNG_GPIOLIB_4BIT - -config GPIO_S5PC100 - def_bool y - depends on CPU_S5PC100 - -config GPIO_S5PV210 - def_bool y - depends on CPU_S5PV210 - config GPIO_PL061 bool "PrimeCell PL061 GPIO support" depends on ARM_AMBA diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 9588948c96f..62db458c850 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -15,7 +15,6 @@ obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o -obj-$(CONFIG_GPIO_EXYNOS4) += gpio-exynos4.o obj-$(CONFIG_GPIO_IT8761E) += gpio-it8761e.o obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o obj-$(CONFIG_GPIO_LANGWELL) += gpio-langwell.o @@ -38,11 +37,7 @@ obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o obj-$(CONFIG_GPIO_PCH) += gpio-pch.o obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o - -obj-$(CONFIG_GPIO_PLAT_SAMSUNG) += gpio-plat-samsung.o -obj-$(CONFIG_GPIO_S5PC100) += gpio-s5pc100.o -obj-$(CONFIG_GPIO_S5PV210) += gpio-s5pv210.o - +obj-$(CONFIG_PLAT_SAMSUNG) += gpio-samsung.o obj-$(CONFIG_GPIO_SCH) += gpio-sch.o obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o obj-$(CONFIG_GPIO_SX150X) += gpio-sx150x.o diff --git a/drivers/gpio/gpio-exynos4.c b/drivers/gpio/gpio-exynos4.c deleted file mode 100644 index d24b337cf1a..00000000000 --- a/drivers/gpio/gpio-exynos4.c +++ /dev/null @@ -1,385 +0,0 @@ -/* - * EXYNOS4 - GPIOlib support - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/gpio.h> - -#include <mach/map.h> - -#include <plat/gpio-core.h> -#include <plat/gpio-cfg.h> -#include <plat/gpio-cfg-helpers.h> - -int s3c_gpio_setpull_exynos4(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull) -{ - if (pull == S3C_GPIO_PULL_UP) - pull = 3; - - return s3c_gpio_setpull_updown(chip, off, pull); -} - -s3c_gpio_pull_t s3c_gpio_getpull_exynos4(struct s3c_gpio_chip *chip, - unsigned int off) -{ - s3c_gpio_pull_t pull; - - pull = s3c_gpio_getpull_updown(chip, off); - if (pull == 3) - pull = S3C_GPIO_PULL_UP; - - return pull; -} - -static struct s3c_gpio_cfg gpio_cfg = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_exynos4, - .get_pull = s3c_gpio_getpull_exynos4, -}; - -static struct s3c_gpio_cfg gpio_cfg_noint = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_exynos4, - .get_pull = s3c_gpio_getpull_exynos4, -}; - -/* - * Following are the gpio banks in v310. - * - * The 'config' member when left to NULL, is initialized to the default - * structure gpio_cfg in the init function below. - * - * The 'base' member is also initialized in the init function below. - * Note: The initialization of 'base' member of s3c_gpio_chip structure - * uses the above macro and depends on the banks being listed in order here. - */ -static struct s3c_gpio_chip exynos4_gpio_part1_4bit[] = { - { - .chip = { - .base = EXYNOS4_GPA0(0), - .ngpio = EXYNOS4_GPIO_A0_NR, - .label = "GPA0", - }, - }, { - .chip = { - .base = EXYNOS4_GPA1(0), - .ngpio = EXYNOS4_GPIO_A1_NR, - .label = "GPA1", - }, - }, { - .chip = { - .base = EXYNOS4_GPB(0), - .ngpio = EXYNOS4_GPIO_B_NR, - .label = "GPB", - }, - }, { - .chip = { - .base = EXYNOS4_GPC0(0), - .ngpio = EXYNOS4_GPIO_C0_NR, - .label = "GPC0", - }, - }, { - .chip = { - .base = EXYNOS4_GPC1(0), - .ngpio = EXYNOS4_GPIO_C1_NR, - .label = "GPC1", - }, - }, { - .chip = { - .base = EXYNOS4_GPD0(0), - .ngpio = EXYNOS4_GPIO_D0_NR, - .label = "GPD0", - }, - }, { - .chip = { - .base = EXYNOS4_GPD1(0), - .ngpio = EXYNOS4_GPIO_D1_NR, - .label = "GPD1", - }, - }, { - .chip = { - .base = EXYNOS4_GPE0(0), - .ngpio = EXYNOS4_GPIO_E0_NR, - .label = "GPE0", - }, - }, { - .chip = { - .base = EXYNOS4_GPE1(0), - .ngpio = EXYNOS4_GPIO_E1_NR, - .label = "GPE1", - }, - }, { - .chip = { - .base = EXYNOS4_GPE2(0), - .ngpio = EXYNOS4_GPIO_E2_NR, - .label = "GPE2", - }, - }, { - .chip = { - .base = EXYNOS4_GPE3(0), - .ngpio = EXYNOS4_GPIO_E3_NR, - .label = "GPE3", - }, - }, { - .chip = { - .base = EXYNOS4_GPE4(0), - .ngpio = EXYNOS4_GPIO_E4_NR, - .label = "GPE4", - }, - }, { - .chip = { - .base = EXYNOS4_GPF0(0), - .ngpio = EXYNOS4_GPIO_F0_NR, - .label = "GPF0", - }, - }, { - .chip = { - .base = EXYNOS4_GPF1(0), - .ngpio = EXYNOS4_GPIO_F1_NR, - .label = "GPF1", - }, - }, { - .chip = { - .base = EXYNOS4_GPF2(0), - .ngpio = EXYNOS4_GPIO_F2_NR, - .label = "GPF2", - }, - }, { - .chip = { - .base = EXYNOS4_GPF3(0), - .ngpio = EXYNOS4_GPIO_F3_NR, - .label = "GPF3", - }, - }, -}; - -static struct s3c_gpio_chip exynos4_gpio_part2_4bit[] = { - { - .chip = { - .base = EXYNOS4_GPJ0(0), - .ngpio = EXYNOS4_GPIO_J0_NR, - .label = "GPJ0", - }, - }, { - .chip = { - .base = EXYNOS4_GPJ1(0), - .ngpio = EXYNOS4_GPIO_J1_NR, - .label = "GPJ1", - }, - }, { - .chip = { - .base = EXYNOS4_GPK0(0), - .ngpio = EXYNOS4_GPIO_K0_NR, - .label = "GPK0", - }, - }, { - .chip = { - .base = EXYNOS4_GPK1(0), - .ngpio = EXYNOS4_GPIO_K1_NR, - .label = "GPK1", - }, - }, { - .chip = { - .base = EXYNOS4_GPK2(0), - .ngpio = EXYNOS4_GPIO_K2_NR, - .label = "GPK2", - }, - }, { - .chip = { - .base = EXYNOS4_GPK3(0), - .ngpio = EXYNOS4_GPIO_K3_NR, - .label = "GPK3", - }, - }, { - .chip = { - .base = EXYNOS4_GPL0(0), - .ngpio = EXYNOS4_GPIO_L0_NR, - .label = "GPL0", - }, - }, { - .chip = { - .base = EXYNOS4_GPL1(0), - .ngpio = EXYNOS4_GPIO_L1_NR, - .label = "GPL1", - }, - }, { - .chip = { - .base = EXYNOS4_GPL2(0), - .ngpio = EXYNOS4_GPIO_L2_NR, - .label = "GPL2", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY0(0), - .ngpio = EXYNOS4_GPIO_Y0_NR, - .label = "GPY0", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY1(0), - .ngpio = EXYNOS4_GPIO_Y1_NR, - .label = "GPY1", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY2(0), - .ngpio = EXYNOS4_GPIO_Y2_NR, - .label = "GPY2", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY3(0), - .ngpio = EXYNOS4_GPIO_Y3_NR, - .label = "GPY3", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY4(0), - .ngpio = EXYNOS4_GPIO_Y4_NR, - .label = "GPY4", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY5(0), - .ngpio = EXYNOS4_GPIO_Y5_NR, - .label = "GPY5", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY6(0), - .ngpio = EXYNOS4_GPIO_Y6_NR, - .label = "GPY6", - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC00), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(0), - .chip = { - .base = EXYNOS4_GPX0(0), - .ngpio = EXYNOS4_GPIO_X0_NR, - .label = "GPX0", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC20), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(8), - .chip = { - .base = EXYNOS4_GPX1(0), - .ngpio = EXYNOS4_GPIO_X1_NR, - .label = "GPX1", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC40), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(16), - .chip = { - .base = EXYNOS4_GPX2(0), - .ngpio = EXYNOS4_GPIO_X2_NR, - .label = "GPX2", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC60), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(24), - .chip = { - .base = EXYNOS4_GPX3(0), - .ngpio = EXYNOS4_GPIO_X3_NR, - .label = "GPX3", - .to_irq = samsung_gpiolib_to_irq, - }, - }, -}; - -static struct s3c_gpio_chip exynos4_gpio_part3_4bit[] = { - { - .chip = { - .base = EXYNOS4_GPZ(0), - .ngpio = EXYNOS4_GPIO_Z_NR, - .label = "GPZ", - }, - }, -}; - -static __init int exynos4_gpiolib_init(void) -{ - struct s3c_gpio_chip *chip; - int i; - int group = 0; - int nr_chips; - - /* GPIO part 1 */ - - chip = exynos4_gpio_part1_4bit; - nr_chips = ARRAY_SIZE(exynos4_gpio_part1_4bit); - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) { - chip->config = &gpio_cfg; - /* Assign the GPIO interrupt group */ - chip->group = group++; - } - if (chip->base == NULL) - chip->base = S5P_VA_GPIO1 + (i) * 0x20; - } - - samsung_gpiolib_add_4bit_chips(exynos4_gpio_part1_4bit, nr_chips); - - /* GPIO part 2 */ - - chip = exynos4_gpio_part2_4bit; - nr_chips = ARRAY_SIZE(exynos4_gpio_part2_4bit); - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) { - chip->config = &gpio_cfg; - /* Assign the GPIO interrupt group */ - chip->group = group++; - } - if (chip->base == NULL) - chip->base = S5P_VA_GPIO2 + (i) * 0x20; - } - - samsung_gpiolib_add_4bit_chips(exynos4_gpio_part2_4bit, nr_chips); - - /* GPIO part 3 */ - - chip = exynos4_gpio_part3_4bit; - nr_chips = ARRAY_SIZE(exynos4_gpio_part3_4bit); - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) { - chip->config = &gpio_cfg; - /* Assign the GPIO interrupt group */ - chip->group = group++; - } - if (chip->base == NULL) - chip->base = S5P_VA_GPIO3 + (i) * 0x20; - } - - samsung_gpiolib_add_4bit_chips(exynos4_gpio_part3_4bit, nr_chips); - s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS); - s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS); - - return 0; -} -core_initcall(exynos4_gpiolib_init); diff --git a/drivers/gpio/gpio-generic.c b/drivers/gpio/gpio-generic.c index 231714def4d..4e24436b0f8 100644 --- a/drivers/gpio/gpio-generic.c +++ b/drivers/gpio/gpio-generic.c @@ -351,7 +351,7 @@ static int bgpio_setup_direction(struct bgpio_chip *bgc, return 0; } -int __devexit bgpio_remove(struct bgpio_chip *bgc) +int bgpio_remove(struct bgpio_chip *bgc) { int err = gpiochip_remove(&bgc->gc); @@ -361,15 +361,10 @@ int __devexit bgpio_remove(struct bgpio_chip *bgc) } EXPORT_SYMBOL_GPL(bgpio_remove); -int __devinit bgpio_init(struct bgpio_chip *bgc, - struct device *dev, - unsigned long sz, - void __iomem *dat, - void __iomem *set, - void __iomem *clr, - void __iomem *dirout, - void __iomem *dirin, - bool big_endian) +int bgpio_init(struct bgpio_chip *bgc, struct device *dev, + unsigned long sz, void __iomem *dat, void __iomem *set, + void __iomem *clr, void __iomem *dirout, void __iomem *dirin, + bool big_endian) { int ret; diff --git a/drivers/gpio/gpio-plat-samsung.c b/drivers/gpio/gpio-plat-samsung.c deleted file mode 100644 index ef67f1952a7..00000000000 --- a/drivers/gpio/gpio-plat-samsung.c +++ /dev/null @@ -1,205 +0,0 @@ -/* - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * SAMSUNG - GPIOlib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <plat/gpio-core.h> -#include <plat/gpio-cfg.h> -#include <plat/gpio-cfg-helpers.h> - -#ifndef DEBUG_GPIO -#define gpio_dbg(x...) do { } while (0) -#else -#define gpio_dbg(x...) printk(KERN_DEBUG x) -#endif - -/* The samsung_gpiolib_4bit routines are to control the gpio banks where - * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the - * following example: - * - * base + 0x00: Control register, 4 bits per gpio - * gpio n: 4 bits starting at (4*n) - * 0000 = input, 0001 = output, others mean special-function - * base + 0x04: Data register, 1 bit per gpio - * bit n: data bit n - * - * Note, since the data register is one bit per gpio and is at base + 0x4 - * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of - * the output. -*/ - -static int samsung_gpiolib_4bit_input(struct gpio_chip *chip, - unsigned int offset) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long con; - - con = __raw_readl(base + GPIOCON_OFF); - con &= ~(0xf << con_4bit_shift(offset)); - __raw_writel(con, base + GPIOCON_OFF); - - gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con); - - return 0; -} - -static int samsung_gpiolib_4bit_output(struct gpio_chip *chip, - unsigned int offset, int value) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long con; - unsigned long dat; - - con = __raw_readl(base + GPIOCON_OFF); - con &= ~(0xf << con_4bit_shift(offset)); - con |= 0x1 << con_4bit_shift(offset); - - dat = __raw_readl(base + GPIODAT_OFF); - - if (value) - dat |= 1 << offset; - else - dat &= ~(1 << offset); - - __raw_writel(dat, base + GPIODAT_OFF); - __raw_writel(con, base + GPIOCON_OFF); - __raw_writel(dat, base + GPIODAT_OFF); - - gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); - - return 0; -} - -/* The next set of routines are for the case where the GPIO configuration - * registers are 4 bits per GPIO but there is more than one register (the - * bank has more than 8 GPIOs. - * - * This case is the similar to the 4 bit case, but the registers are as - * follows: - * - * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs) - * gpio n: 4 bits starting at (4*n) - * 0000 = input, 0001 = output, others mean special-function - * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs) - * gpio n: 4 bits starting at (4*n) - * 0000 = input, 0001 = output, others mean special-function - * base + 0x08: Data register, 1 bit per gpio - * bit n: data bit n - * - * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we - * store the 'base + 0x4' address so that these routines see the data - * register at ourchip->base + 0x04. - */ - -static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip, - unsigned int offset) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - void __iomem *regcon = base; - unsigned long con; - - if (offset > 7) - offset -= 8; - else - regcon -= 4; - - con = __raw_readl(regcon); - con &= ~(0xf << con_4bit_shift(offset)); - __raw_writel(con, regcon); - - gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con); - - return 0; -} - -static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip, - unsigned int offset, int value) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - void __iomem *regcon = base; - unsigned long con; - unsigned long dat; - unsigned con_offset = offset; - - if (con_offset > 7) - con_offset -= 8; - else - regcon -= 4; - - con = __raw_readl(regcon); - con &= ~(0xf << con_4bit_shift(con_offset)); - con |= 0x1 << con_4bit_shift(con_offset); - - dat = __raw_readl(base + GPIODAT_OFF); - - if (value) - dat |= 1 << offset; - else - dat &= ~(1 << offset); - - __raw_writel(dat, base + GPIODAT_OFF); - __raw_writel(con, regcon); - __raw_writel(dat, base + GPIODAT_OFF); - - gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); - - return 0; -} - -void __init samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip) -{ - chip->chip.direction_input = samsung_gpiolib_4bit_input; - chip->chip.direction_output = samsung_gpiolib_4bit_output; - chip->pm = __gpio_pm(&s3c_gpio_pm_4bit); -} - -void __init samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip) -{ - chip->chip.direction_input = samsung_gpiolib_4bit2_input; - chip->chip.direction_output = samsung_gpiolib_4bit2_output; - chip->pm = __gpio_pm(&s3c_gpio_pm_4bit); -} - -void __init samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip, - int nr_chips) -{ - for (; nr_chips > 0; nr_chips--, chip++) { - samsung_gpiolib_add_4bit(chip); - s3c_gpiolib_add(chip); - } -} - -void __init samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip, - int nr_chips) -{ - for (; nr_chips > 0; nr_chips--, chip++) { - samsung_gpiolib_add_4bit2(chip); - s3c_gpiolib_add(chip); - } -} - -void __init samsung_gpiolib_add_2bit_chips(struct s3c_gpio_chip *chip, - int nr_chips) -{ - for (; nr_chips > 0; nr_chips--, chip++) - s3c_gpiolib_add(chip); -} diff --git a/drivers/gpio/gpio-s5pc100.c b/drivers/gpio/gpio-s5pc100.c deleted file mode 100644 index 7f87b0c76e0..00000000000 --- a/drivers/gpio/gpio-s5pc100.c +++ /dev/null @@ -1,354 +0,0 @@ -/* - * S5PC100 - GPIOlib support - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright 2009 Samsung Electronics Co - * Kyungmin Park <kyungmin.park@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/gpio.h> - -#include <mach/map.h> -#include <mach/regs-gpio.h> - -#include <plat/gpio-core.h> -#include <plat/gpio-cfg.h> -#include <plat/gpio-cfg-helpers.h> - -/* S5PC100 GPIO bank summary: - * - * Bank GPIOs Style INT Type - * A0 8 4Bit GPIO_INT0 - * A1 5 4Bit GPIO_INT1 - * B 8 4Bit GPIO_INT2 - * C 5 4Bit GPIO_INT3 - * D 7 4Bit GPIO_INT4 - * E0 8 4Bit GPIO_INT5 - * E1 6 4Bit GPIO_INT6 - * F0 8 4Bit GPIO_INT7 - * F1 8 4Bit GPIO_INT8 - * F2 8 4Bit GPIO_INT9 - * F3 4 4Bit GPIO_INT10 - * G0 8 4Bit GPIO_INT11 - * G1 3 4Bit GPIO_INT12 - * G2 7 4Bit GPIO_INT13 - * G3 7 4Bit GPIO_INT14 - * H0 8 4Bit WKUP_INT - * H1 8 4Bit WKUP_INT - * H2 8 4Bit WKUP_INT - * H3 8 4Bit WKUP_INT - * I 8 4Bit GPIO_INT15 - * J0 8 4Bit GPIO_INT16 - * J1 5 4Bit GPIO_INT17 - * J2 8 4Bit GPIO_INT18 - * J3 8 4Bit GPIO_INT19 - * J4 4 4Bit GPIO_INT20 - * K0 8 4Bit None - * K1 6 4Bit None - * K2 8 4Bit None - * K3 8 4Bit None - * L0 8 4Bit None - * L1 8 4Bit None - * L2 8 4Bit None - * L3 8 4Bit None - */ - -static struct s3c_gpio_cfg gpio_cfg = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_cfg_eint = { - .cfg_eint = 0xf, - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_cfg_noint = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -/* - * GPIO bank's base address given the index of the bank in the - * list of all gpio banks. - */ -#define S5PC100_BANK_BASE(bank_nr) (S5P_VA_GPIO + ((bank_nr) * 0x20)) - -/* - * Following are the gpio banks in S5PC100. - * - * The 'config' member when left to NULL, is initialized to the default - * structure gpio_cfg in the init function below. - * - * The 'base' member is also initialized in the init function below. - * Note: The initialization of 'base' member of s3c_gpio_chip structure - * uses the above macro and depends on the banks being listed in order here. - */ -static struct s3c_gpio_chip s5pc100_gpio_chips[] = { - { - .chip = { - .base = S5PC100_GPA0(0), - .ngpio = S5PC100_GPIO_A0_NR, - .label = "GPA0", - }, - }, { - .chip = { - .base = S5PC100_GPA1(0), - .ngpio = S5PC100_GPIO_A1_NR, - .label = "GPA1", - }, - }, { - .chip = { - .base = S5PC100_GPB(0), - .ngpio = S5PC100_GPIO_B_NR, - .label = "GPB", - }, - }, { - .chip = { - .base = S5PC100_GPC(0), - .ngpio = S5PC100_GPIO_C_NR, - .label = "GPC", - }, - }, { - .chip = { - .base = S5PC100_GPD(0), - .ngpio = S5PC100_GPIO_D_NR, - .label = "GPD", - }, - }, { - .chip = { - .base = S5PC100_GPE0(0), - .ngpio = S5PC100_GPIO_E0_NR, - .label = "GPE0", - }, - }, { - .chip = { - .base = S5PC100_GPE1(0), - .ngpio = S5PC100_GPIO_E1_NR, - .label = "GPE1", - }, - }, { - .chip = { - .base = S5PC100_GPF0(0), - .ngpio = S5PC100_GPIO_F0_NR, - .label = "GPF0", - }, - }, { - .chip = { - .base = S5PC100_GPF1(0), - .ngpio = S5PC100_GPIO_F1_NR, - .label = "GPF1", - }, - }, { - .chip = { - .base = S5PC100_GPF2(0), - .ngpio = S5PC100_GPIO_F2_NR, - .label = "GPF2", - }, - }, { - .chip = { - .base = S5PC100_GPF3(0), - .ngpio = S5PC100_GPIO_F3_NR, - .label = "GPF3", - }, - }, { - .chip = { - .base = S5PC100_GPG0(0), - .ngpio = S5PC100_GPIO_G0_NR, - .label = "GPG0", - }, - }, { - .chip = { - .base = S5PC100_GPG1(0), - .ngpio = S5PC100_GPIO_G1_NR, - .label = "GPG1", - }, - }, { - .chip = { - .base = S5PC100_GPG2(0), - .ngpio = S5PC100_GPIO_G2_NR, - .label = "GPG2", - }, - }, { - .chip = { - .base = S5PC100_GPG3(0), - .ngpio = S5PC100_GPIO_G3_NR, - .label = "GPG3", - }, - }, { - .chip = { - .base = S5PC100_GPI(0), - .ngpio = S5PC100_GPIO_I_NR, - .label = "GPI", - }, - }, { - .chip = { - .base = S5PC100_GPJ0(0), - .ngpio = S5PC100_GPIO_J0_NR, - .label = "GPJ0", - }, - }, { - .chip = { - .base = S5PC100_GPJ1(0), - .ngpio = S5PC100_GPIO_J1_NR, - .label = "GPJ1", - }, - }, { - .chip = { - .base = S5PC100_GPJ2(0), - .ngpio = S5PC100_GPIO_J2_NR, - .label = "GPJ2", - }, - }, { - .chip = { - .base = S5PC100_GPJ3(0), - .ngpio = S5PC100_GPIO_J3_NR, - .label = "GPJ3", - }, - }, { - .chip = { - .base = S5PC100_GPJ4(0), - .ngpio = S5PC100_GPIO_J4_NR, - .label = "GPJ4", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPK0(0), - .ngpio = S5PC100_GPIO_K0_NR, - .label = "GPK0", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPK1(0), - .ngpio = S5PC100_GPIO_K1_NR, - .label = "GPK1", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPK2(0), - .ngpio = S5PC100_GPIO_K2_NR, - .label = "GPK2", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPK3(0), - .ngpio = S5PC100_GPIO_K3_NR, - .label = "GPK3", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPL0(0), - .ngpio = S5PC100_GPIO_L0_NR, - .label = "GPL0", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPL1(0), - .ngpio = S5PC100_GPIO_L1_NR, - .label = "GPL1", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPL2(0), - .ngpio = S5PC100_GPIO_L2_NR, - .label = "GPL2", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPL3(0), - .ngpio = S5PC100_GPIO_L3_NR, - .label = "GPL3", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPL4(0), - .ngpio = S5PC100_GPIO_L4_NR, - .label = "GPL4", - }, - }, { - .base = (S5P_VA_GPIO + 0xC00), - .config = &gpio_cfg_eint, - .irq_base = IRQ_EINT(0), - .chip = { - .base = S5PC100_GPH0(0), - .ngpio = S5PC100_GPIO_H0_NR, - .label = "GPH0", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO + 0xC20), - .config = &gpio_cfg_eint, - .irq_base = IRQ_EINT(8), - .chip = { - .base = S5PC100_GPH1(0), - .ngpio = S5PC100_GPIO_H1_NR, - .label = "GPH1", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO + 0xC40), - .config = &gpio_cfg_eint, - .irq_base = IRQ_EINT(16), - .chip = { - .base = S5PC100_GPH2(0), - .ngpio = S5PC100_GPIO_H2_NR, - .label = "GPH2", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO + 0xC60), - .config = &gpio_cfg_eint, - .irq_base = IRQ_EINT(24), - .chip = { - .base = S5PC100_GPH3(0), - .ngpio = S5PC100_GPIO_H3_NR, - .label = "GPH3", - .to_irq = samsung_gpiolib_to_irq, - }, - }, -}; - -static __init int s5pc100_gpiolib_init(void) -{ - struct s3c_gpio_chip *chip = s5pc100_gpio_chips; - int nr_chips = ARRAY_SIZE(s5pc100_gpio_chips); - int gpioint_group = 0; - int i; - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) { - chip->config = &gpio_cfg; - chip->group = gpioint_group++; - } - if (chip->base == NULL) - chip->base = S5PC100_BANK_BASE(i); - } - - samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips, nr_chips); - s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR); - - return 0; -} -core_initcall(s5pc100_gpiolib_init); diff --git a/drivers/gpio/gpio-s5pv210.c b/drivers/gpio/gpio-s5pv210.c deleted file mode 100644 index eb12f1602de..00000000000 --- a/drivers/gpio/gpio-s5pv210.c +++ /dev/null @@ -1,287 +0,0 @@ -/* - * S5PV210 - GPIOlib support - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <plat/gpio-core.h> -#include <plat/gpio-cfg.h> -#include <plat/gpio-cfg-helpers.h> -#include <mach/map.h> - -static struct s3c_gpio_cfg gpio_cfg = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_cfg_noint = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -/* GPIO bank's base address given the index of the bank in the - * list of all gpio banks. - */ -#define S5PV210_BANK_BASE(bank_nr) (S5P_VA_GPIO + ((bank_nr) * 0x20)) - -/* - * Following are the gpio banks in v210. - * - * The 'config' member when left to NULL, is initialized to the default - * structure gpio_cfg in the init function below. - * - * The 'base' member is also initialized in the init function below. - * Note: The initialization of 'base' member of s3c_gpio_chip structure - * uses the above macro and depends on the banks being listed in order here. - */ -static struct s3c_gpio_chip s5pv210_gpio_4bit[] = { - { - .chip = { - .base = S5PV210_GPA0(0), - .ngpio = S5PV210_GPIO_A0_NR, - .label = "GPA0", - }, - }, { - .chip = { - .base = S5PV210_GPA1(0), - .ngpio = S5PV210_GPIO_A1_NR, - .label = "GPA1", - }, - }, { - .chip = { - .base = S5PV210_GPB(0), - .ngpio = S5PV210_GPIO_B_NR, - .label = "GPB", - }, - }, { - .chip = { - .base = S5PV210_GPC0(0), - .ngpio = S5PV210_GPIO_C0_NR, - .label = "GPC0", - }, - }, { - .chip = { - .base = S5PV210_GPC1(0), - .ngpio = S5PV210_GPIO_C1_NR, - .label = "GPC1", - }, - }, { - .chip = { - .base = S5PV210_GPD0(0), - .ngpio = S5PV210_GPIO_D0_NR, - .label = "GPD0", - }, - }, { - .chip = { - .base = S5PV210_GPD1(0), - .ngpio = S5PV210_GPIO_D1_NR, - .label = "GPD1", - }, - }, { - .chip = { - .base = S5PV210_GPE0(0), - .ngpio = S5PV210_GPIO_E0_NR, - .label = "GPE0", - }, - }, { - .chip = { - .base = S5PV210_GPE1(0), - .ngpio = S5PV210_GPIO_E1_NR, - .label = "GPE1", - }, - }, { - .chip = { - .base = S5PV210_GPF0(0), - .ngpio = S5PV210_GPIO_F0_NR, - .label = "GPF0", - }, - }, { - .chip = { - .base = S5PV210_GPF1(0), - .ngpio = S5PV210_GPIO_F1_NR, - .label = "GPF1", - }, - }, { - .chip = { - .base = S5PV210_GPF2(0), - .ngpio = S5PV210_GPIO_F2_NR, - .label = "GPF2", - }, - }, { - .chip = { - .base = S5PV210_GPF3(0), - .ngpio = S5PV210_GPIO_F3_NR, - .label = "GPF3", - }, - }, { - .chip = { - .base = S5PV210_GPG0(0), - .ngpio = S5PV210_GPIO_G0_NR, - .label = "GPG0", - }, - }, { - .chip = { - .base = S5PV210_GPG1(0), - .ngpio = S5PV210_GPIO_G1_NR, - .label = "GPG1", - }, - }, { - .chip = { - .base = S5PV210_GPG2(0), - .ngpio = S5PV210_GPIO_G2_NR, - .label = "GPG2", - }, - }, { - .chip = { - .base = S5PV210_GPG3(0), - .ngpio = S5PV210_GPIO_G3_NR, - .label = "GPG3", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PV210_GPI(0), - .ngpio = S5PV210_GPIO_I_NR, - .label = "GPI", - }, - }, { - .chip = { - .base = S5PV210_GPJ0(0), - .ngpio = S5PV210_GPIO_J0_NR, - .label = "GPJ0", - }, - }, { - .chip = { - .base = S5PV210_GPJ1(0), - .ngpio = S5PV210_GPIO_J1_NR, - .label = "GPJ1", - }, - }, { - .chip = { - .base = S5PV210_GPJ2(0), - .ngpio = S5PV210_GPIO_J2_NR, - .label = "GPJ2", - }, - }, { - .chip = { - .base = S5PV210_GPJ3(0), - .ngpio = S5PV210_GPIO_J3_NR, - .label = "GPJ3", - }, - }, { - .chip = { - .base = S5PV210_GPJ4(0), - .ngpio = S5PV210_GPIO_J4_NR, - .label = "GPJ4", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PV210_MP01(0), - .ngpio = S5PV210_GPIO_MP01_NR, - .label = "MP01", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PV210_MP02(0), - .ngpio = S5PV210_GPIO_MP02_NR, - .label = "MP02", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PV210_MP03(0), - .ngpio = S5PV210_GPIO_MP03_NR, - .label = "MP03", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PV210_MP04(0), - .ngpio = S5PV210_GPIO_MP04_NR, - .label = "MP04", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PV210_MP05(0), - .ngpio = S5PV210_GPIO_MP05_NR, - .label = "MP05", - }, - }, { - .base = (S5P_VA_GPIO + 0xC00), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(0), - .chip = { - .base = S5PV210_GPH0(0), - .ngpio = S5PV210_GPIO_H0_NR, - .label = "GPH0", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO + 0xC20), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(8), - .chip = { - .base = S5PV210_GPH1(0), - .ngpio = S5PV210_GPIO_H1_NR, - .label = "GPH1", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO + 0xC40), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(16), - .chip = { - .base = S5PV210_GPH2(0), - .ngpio = S5PV210_GPIO_H2_NR, - .label = "GPH2", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO + 0xC60), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(24), - .chip = { - .base = S5PV210_GPH3(0), - .ngpio = S5PV210_GPIO_H3_NR, - .label = "GPH3", - .to_irq = samsung_gpiolib_to_irq, - }, - }, -}; - -static __init int s5pv210_gpiolib_init(void) -{ - struct s3c_gpio_chip *chip = s5pv210_gpio_4bit; - int nr_chips = ARRAY_SIZE(s5pv210_gpio_4bit); - int gpioint_group = 0; - int i = 0; - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) { - chip->config = &gpio_cfg; - chip->group = gpioint_group++; - } - if (chip->base == NULL) - chip->base = S5PV210_BANK_BASE(i); - } - - samsung_gpiolib_add_4bit_chips(s5pv210_gpio_4bit, nr_chips); - s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR); - - return 0; -} -core_initcall(s5pv210_gpiolib_init); diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c new file mode 100644 index 00000000000..b6be77ae497 --- /dev/null +++ b/drivers/gpio/gpio-samsung.c @@ -0,0 +1,2688 @@ +/* + * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * SAMSUNG - GPIOlib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/sysdev.h> +#include <linux/ioport.h> + +#include <asm/irq.h> + +#include <mach/hardware.h> +#include <mach/map.h> +#include <mach/regs-clock.h> +#include <mach/regs-gpio.h> + +#include <plat/cpu.h> +#include <plat/gpio-core.h> +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> +#include <plat/gpio-fns.h> +#include <plat/pm.h> + +#ifndef DEBUG_GPIO +#define gpio_dbg(x...) do { } while (0) +#else +#define gpio_dbg(x...) printk(KERN_DEBUG x) +#endif + +int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull) +{ + void __iomem *reg = chip->base + 0x08; + int shift = off * 2; + u32 pup; + + pup = __raw_readl(reg); + pup &= ~(3 << shift); + pup |= pull << shift; + __raw_writel(pup, reg); + + return 0; +} + +samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip, + unsigned int off) +{ + void __iomem *reg = chip->base + 0x08; + int shift = off * 2; + u32 pup = __raw_readl(reg); + + pup >>= shift; + pup &= 0x3; + + return (__force samsung_gpio_pull_t)pup; +} + +int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull) +{ + switch (pull) { + case S3C_GPIO_PULL_NONE: + pull = 0x01; + break; + case S3C_GPIO_PULL_UP: + pull = 0x00; + break; + case S3C_GPIO_PULL_DOWN: + pull = 0x02; + break; + } + return samsung_gpio_setpull_updown(chip, off, pull); +} + +samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip, + unsigned int off) +{ + samsung_gpio_pull_t pull; + + pull = samsung_gpio_getpull_updown(chip, off); + + switch (pull) { + case 0x00: + pull = S3C_GPIO_PULL_UP; + break; + case 0x01: + case 0x03: + pull = S3C_GPIO_PULL_NONE; + break; + case 0x02: + pull = S3C_GPIO_PULL_DOWN; + break; + } + + return pull; +} + +static int s3c24xx_gpio_setpull_1(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull, + samsung_gpio_pull_t updown) +{ + void __iomem *reg = chip->base + 0x08; + u32 pup = __raw_readl(reg); + + if (pull == updown) + pup &= ~(1 << off); + else if (pull == S3C_GPIO_PULL_NONE) + pup |= (1 << off); + else + return -EINVAL; + + __raw_writel(pup, reg); + return 0; +} + +static samsung_gpio_pull_t s3c24xx_gpio_getpull_1(struct samsung_gpio_chip *chip, + unsigned int off, + samsung_gpio_pull_t updown) +{ + void __iomem *reg = chip->base + 0x08; + u32 pup = __raw_readl(reg); + + pup &= (1 << off); + return pup ? S3C_GPIO_PULL_NONE : updown; +} + +samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip, + unsigned int off) +{ + return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP); +} + +int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull) +{ + return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP); +} + +samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip, + unsigned int off) +{ + return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN); +} + +int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull) +{ + return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN); +} + +static int exynos4_gpio_setpull(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull) +{ + if (pull == S3C_GPIO_PULL_UP) + pull = 3; + + return samsung_gpio_setpull_updown(chip, off, pull); +} + +static samsung_gpio_pull_t exynos4_gpio_getpull(struct samsung_gpio_chip *chip, + unsigned int off) +{ + samsung_gpio_pull_t pull; + + pull = samsung_gpio_getpull_updown(chip, off); + + if (pull == 3) + pull = S3C_GPIO_PULL_UP; + + return pull; +} + +/* + * samsung_gpio_setcfg_2bit - Samsung 2bit style GPIO configuration. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @cfg: The configuration value to set. + * + * This helper deal with the GPIO cases where the control register + * has two bits of configuration per gpio, which have the following + * functions: + * 00 = input + * 01 = output + * 1x = special function + */ + +static int samsung_gpio_setcfg_2bit(struct samsung_gpio_chip *chip, + unsigned int off, unsigned int cfg) +{ + void __iomem *reg = chip->base; + unsigned int shift = off * 2; + u32 con; + + if (samsung_gpio_is_cfg_special(cfg)) { + cfg &= 0xf; + if (cfg > 3) + return -EINVAL; + + cfg <<= shift; + } + + con = __raw_readl(reg); + con &= ~(0x3 << shift); + con |= cfg; + __raw_writel(con, reg); + + return 0; +} + +/* + * samsung_gpio_getcfg_2bit - Samsung 2bit style GPIO configuration read. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * + * The reverse of samsung_gpio_setcfg_2bit(). Will return a value whicg + * could be directly passed back to samsung_gpio_setcfg_2bit(), from the + * S3C_GPIO_SPECIAL() macro. + */ + +static unsigned int samsung_gpio_getcfg_2bit(struct samsung_gpio_chip *chip, + unsigned int off) +{ + u32 con; + + con = __raw_readl(chip->base); + con >>= off * 2; + con &= 3; + + /* this conversion works for IN and OUT as well as special mode */ + return S3C_GPIO_SPECIAL(con); +} + +/* + * samsung_gpio_setcfg_4bit - Samsung 4bit single register GPIO config. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @cfg: The configuration value to set. + * + * This helper deal with the GPIO cases where the control register has 4 bits + * of control per GPIO, generally in the form of: + * 0000 = Input + * 0001 = Output + * others = Special functions (dependent on bank) + * + * Note, since the code to deal with the case where there are two control + * registers instead of one, we do not have a separate set of functions for + * each case. + */ + +static int samsung_gpio_setcfg_4bit(struct samsung_gpio_chip *chip, + unsigned int off, unsigned int cfg) +{ + void __iomem *reg = chip->base; + unsigned int shift = (off & 7) * 4; + u32 con; + + if (off < 8 && chip->chip.ngpio > 8) + reg -= 4; + + if (samsung_gpio_is_cfg_special(cfg)) { + cfg &= 0xf; + cfg <<= shift; + } + + con = __raw_readl(reg); + con &= ~(0xf << shift); + con |= cfg; + __raw_writel(con, reg); + + return 0; +} + +/* + * samsung_gpio_getcfg_4bit - Samsung 4bit single register GPIO config read. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * + * The reverse of samsung_gpio_setcfg_4bit(), turning a gpio configuration + * register setting into a value the software can use, such as could be passed + * to samsung_gpio_setcfg_4bit(). + * + * @sa samsung_gpio_getcfg_2bit + */ + +static unsigned samsung_gpio_getcfg_4bit(struct samsung_gpio_chip *chip, + unsigned int off) +{ + void __iomem *reg = chip->base; + unsigned int shift = (off & 7) * 4; + u32 con; + + if (off < 8 && chip->chip.ngpio > 8) + reg -= 4; + + con = __raw_readl(reg); + con >>= shift; + con &= 0xf; + + /* this conversion works for IN and OUT as well as special mode */ + return S3C_GPIO_SPECIAL(con); +} + +/* + * s3c24xx_gpio_setcfg_abank - S3C24XX style GPIO configuration (Bank A) + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @cfg: The configuration value to set. + * + * This helper deal with the GPIO cases where the control register + * has one bit of configuration for the gpio, where setting the bit + * means the pin is in special function mode and unset means output. + */ + +static int s3c24xx_gpio_setcfg_abank(struct samsung_gpio_chip *chip, + unsigned int off, unsigned int cfg) +{ + void __iomem *reg = chip->base; + unsigned int shift = off; + u32 con; + + if (samsung_gpio_is_cfg_special(cfg)) { + cfg &= 0xf; + + /* Map output to 0, and SFN2 to 1 */ + cfg -= 1; + if (cfg > 1) + return -EINVAL; + + cfg <<= shift; + } + + con = __raw_readl(reg); + con &= ~(0x1 << shift); + con |= cfg; + __raw_writel(con, reg); + + return 0; +} + +/* + * s3c24xx_gpio_getcfg_abank - S3C24XX style GPIO configuration read (Bank A) + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * + * The reverse of s3c24xx_gpio_setcfg_abank() turning an GPIO into a usable + * GPIO configuration value. + * + * @sa samsung_gpio_getcfg_2bit + * @sa samsung_gpio_getcfg_4bit + */ + +static unsigned s3c24xx_gpio_getcfg_abank(struct samsung_gpio_chip *chip, + unsigned int off) +{ + u32 con; + + con = __raw_readl(chip->base); + con >>= off; + con &= 1; + con++; + + return S3C_GPIO_SFN(con); +} + +static int s5p64x0_gpio_setcfg_rbank(struct samsung_gpio_chip *chip, + unsigned int off, unsigned int cfg) +{ + void __iomem *reg = chip->base; + unsigned int shift; + u32 con; + + switch (off) { + case 0: + case 1: + case 2: + case 3: + case 4: + case 5: + shift = (off & 7) * 4; + reg -= 4; + break; + case 6: + shift = ((off + 1) & 7) * 4; + reg -= 4; + default: + shift = ((off + 1) & 7) * 4; + break; + } + + if (samsung_gpio_is_cfg_special(cfg)) { + cfg &= 0xf; + cfg <<= shift; + } + + con = __raw_readl(reg); + con &= ~(0xf << shift); + con |= cfg; + __raw_writel(con, reg); + + return 0; +} + +static void __init samsung_gpiolib_set_cfg(struct samsung_gpio_cfg *chipcfg, + int nr_chips) +{ + for (; nr_chips > 0; nr_chips--, chipcfg++) { + if (!chipcfg->set_config) + chipcfg->set_config = samsung_gpio_setcfg_4bit; + if (!chipcfg->get_config) + chipcfg->get_config = samsung_gpio_getcfg_4bit; + if (!chipcfg->set_pull) + chipcfg->set_pull = samsung_gpio_setpull_updown; + if (!chipcfg->get_pull) + chipcfg->get_pull = samsung_gpio_getpull_updown; + } +} + +struct samsung_gpio_cfg s3c24xx_gpiocfg_default = { + .set_config = samsung_gpio_setcfg_2bit, + .get_config = samsung_gpio_getcfg_2bit, +}; + +static struct samsung_gpio_cfg s3c24xx_gpiocfg_banka = { + .set_config = s3c24xx_gpio_setcfg_abank, + .get_config = s3c24xx_gpio_getcfg_abank, +}; + +static struct samsung_gpio_cfg exynos4_gpio_cfg = { + .set_pull = exynos4_gpio_setpull, + .get_pull = exynos4_gpio_getpull, + .set_config = samsung_gpio_setcfg_4bit, + .get_config = samsung_gpio_getcfg_4bit, +}; + +static struct samsung_gpio_cfg s5p64x0_gpio_cfg_rbank = { + .cfg_eint = 0x3, + .set_config = s5p64x0_gpio_setcfg_rbank, + .get_config = samsung_gpio_getcfg_4bit, + .set_pull = samsung_gpio_setpull_updown, + .get_pull = samsung_gpio_getpull_updown, +}; + +static struct samsung_gpio_cfg samsung_gpio_cfgs[] = { + { + .cfg_eint = 0x0, + }, { + .cfg_eint = 0x3, + }, { + .cfg_eint = 0x7, + }, { + .cfg_eint = 0xF, + }, { + .cfg_eint = 0x0, + .set_config = samsung_gpio_setcfg_2bit, + .get_config = samsung_gpio_getcfg_2bit, + }, { + .cfg_eint = 0x2, + .set_config = samsung_gpio_setcfg_2bit, + .get_config = samsung_gpio_getcfg_2bit, + }, { + .cfg_eint = 0x3, + .set_config = samsung_gpio_setcfg_2bit, + .get_config = samsung_gpio_getcfg_2bit, + }, { + .set_config = samsung_gpio_setcfg_2bit, + .get_config = samsung_gpio_getcfg_2bit, + }, +}; + +/* + * Default routines for controlling GPIO, based on the original S3C24XX + * GPIO functions which deal with the case where each gpio bank of the + * chip is as following: + * + * base + 0x00: Control register, 2 bits per gpio + * gpio n: 2 bits starting at (2*n) + * 00 = input, 01 = output, others mean special-function + * base + 0x04: Data register, 1 bit per gpio + * bit n: data bit n +*/ + +static int samsung_gpiolib_2bit_input(struct gpio_chip *chip, unsigned offset) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long flags; + unsigned long con; + + samsung_gpio_lock(ourchip, flags); + + con = __raw_readl(base + 0x00); + con &= ~(3 << (offset * 2)); + + __raw_writel(con, base + 0x00); + + samsung_gpio_unlock(ourchip, flags); + return 0; +} + +static int samsung_gpiolib_2bit_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long flags; + unsigned long dat; + unsigned long con; + + samsung_gpio_lock(ourchip, flags); + + dat = __raw_readl(base + 0x04); + dat &= ~(1 << offset); + if (value) + dat |= 1 << offset; + __raw_writel(dat, base + 0x04); + + con = __raw_readl(base + 0x00); + con &= ~(3 << (offset * 2)); + con |= 1 << (offset * 2); + + __raw_writel(con, base + 0x00); + __raw_writel(dat, base + 0x04); + + samsung_gpio_unlock(ourchip, flags); + return 0; +} + +/* + * The samsung_gpiolib_4bit routines are to control the gpio banks where + * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the + * following example: + * + * base + 0x00: Control register, 4 bits per gpio + * gpio n: 4 bits starting at (4*n) + * 0000 = input, 0001 = output, others mean special-function + * base + 0x04: Data register, 1 bit per gpio + * bit n: data bit n + * + * Note, since the data register is one bit per gpio and is at base + 0x4 + * we can use samsung_gpiolib_get and samsung_gpiolib_set to change the + * state of the output. + */ + +static int samsung_gpiolib_4bit_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long con; + + con = __raw_readl(base + GPIOCON_OFF); + con &= ~(0xf << con_4bit_shift(offset)); + __raw_writel(con, base + GPIOCON_OFF); + + gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con); + + return 0; +} + +static int samsung_gpiolib_4bit_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long con; + unsigned long dat; + + con = __raw_readl(base + GPIOCON_OFF); + con &= ~(0xf << con_4bit_shift(offset)); + con |= 0x1 << con_4bit_shift(offset); + + dat = __raw_readl(base + GPIODAT_OFF); + + if (value) + dat |= 1 << offset; + else + dat &= ~(1 << offset); + + __raw_writel(dat, base + GPIODAT_OFF); + __raw_writel(con, base + GPIOCON_OFF); + __raw_writel(dat, base + GPIODAT_OFF); + + gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); + + return 0; +} + +/* + * The next set of routines are for the case where the GPIO configuration + * registers are 4 bits per GPIO but there is more than one register (the + * bank has more than 8 GPIOs. + * + * This case is the similar to the 4 bit case, but the registers are as + * follows: + * + * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs) + * gpio n: 4 bits starting at (4*n) + * 0000 = input, 0001 = output, others mean special-function + * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs) + * gpio n: 4 bits starting at (4*n) + * 0000 = input, 0001 = output, others mean special-function + * base + 0x08: Data register, 1 bit per gpio + * bit n: data bit n + * + * To allow us to use the samsung_gpiolib_get and samsung_gpiolib_set + * routines we store the 'base + 0x4' address so that these routines see + * the data register at ourchip->base + 0x04. + */ + +static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + void __iomem *regcon = base; + unsigned long con; + + if (offset > 7) + offset -= 8; + else + regcon -= 4; + + con = __raw_readl(regcon); + con &= ~(0xf << con_4bit_shift(offset)); + __raw_writel(con, regcon); + + gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con); + + return 0; +} + +static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + void __iomem *regcon = base; + unsigned long con; + unsigned long dat; + unsigned con_offset = offset; + + if (con_offset > 7) + con_offset -= 8; + else + regcon -= 4; + + con = __raw_readl(regcon); + con &= ~(0xf << con_4bit_shift(con_offset)); + con |= 0x1 << con_4bit_shift(con_offset); + + dat = __raw_readl(base + GPIODAT_OFF); + + if (value) + dat |= 1 << offset; + else + dat &= ~(1 << offset); + + __raw_writel(dat, base + GPIODAT_OFF); + __raw_writel(con, regcon); + __raw_writel(dat, base + GPIODAT_OFF); + + gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); + + return 0; +} + +/* The next set of routines are for the case of s3c24xx bank a */ + +static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset) +{ + return -EINVAL; +} + +static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long flags; + unsigned long dat; + unsigned long con; + + local_irq_save(flags); + + con = __raw_readl(base + 0x00); + dat = __raw_readl(base + 0x04); + + dat &= ~(1 << offset); + if (value) + dat |= 1 << offset; + + __raw_writel(dat, base + 0x04); + + con &= ~(1 << offset); + + __raw_writel(con, base + 0x00); + __raw_writel(dat, base + 0x04); + + local_irq_restore(flags); + return 0; +} + +/* The next set of routines are for the case of s5p64x0 bank r */ + +static int s5p64x0_gpiolib_rbank_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + void __iomem *regcon = base; + unsigned long con; + unsigned long flags; + + switch (offset) { + case 6: + offset += 1; + case 0: + case 1: + case 2: + case 3: + case 4: + case 5: + regcon -= 4; + break; + default: + offset -= 7; + break; + } + + samsung_gpio_lock(ourchip, flags); + + con = __raw_readl(regcon); + con &= ~(0xf << con_4bit_shift(offset)); + __raw_writel(con, regcon); + + samsung_gpio_unlock(ourchip, flags); + + return 0; +} + +static int s5p64x0_gpiolib_rbank_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + void __iomem *regcon = base; + unsigned long con; + unsigned long dat; + unsigned long flags; + unsigned con_offset = offset; + + switch (con_offset) { + case 6: + con_offset += 1; + case 0: + case 1: + case 2: + case 3: + case 4: + case 5: + regcon -= 4; + break; + default: + con_offset -= 7; + break; + } + + samsung_gpio_lock(ourchip, flags); + + con = __raw_readl(regcon); + con &= ~(0xf << con_4bit_shift(con_offset)); + con |= 0x1 << con_4bit_shift(con_offset); + + dat = __raw_readl(base + GPIODAT_OFF); + if (value) + dat |= 1 << offset; + else + dat &= ~(1 << offset); + + __raw_writel(con, regcon); + __raw_writel(dat, base + GPIODAT_OFF); + + samsung_gpio_unlock(ourchip, flags); + + return 0; +} + +static void samsung_gpiolib_set(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long flags; + unsigned long dat; + + samsung_gpio_lock(ourchip, flags); + + dat = __raw_readl(base + 0x04); + dat &= ~(1 << offset); + if (value) + dat |= 1 << offset; + __raw_writel(dat, base + 0x04); + + samsung_gpio_unlock(ourchip, flags); +} + +static int samsung_gpiolib_get(struct gpio_chip *chip, unsigned offset) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + unsigned long val; + + val = __raw_readl(ourchip->base + 0x04); + val >>= offset; + val &= 1; + + return val; +} + +/* + * CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios + * for use with the configuration calls, and other parts of the s3c gpiolib + * support code. + * + * Not all s3c support code will need this, as some configurations of cpu + * may only support one or two different configuration options and have an + * easy gpio to samsung_gpio_chip mapping function. If this is the case, then + * the machine support file should provide its own samsung_gpiolib_getchip() + * and any other necessary functions. + */ + +#ifdef CONFIG_S3C_GPIO_TRACK +struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END]; + +static __init void s3c_gpiolib_track(struct samsung_gpio_chip *chip) +{ + unsigned int gpn; + int i; + + gpn = chip->chip.base; + for (i = 0; i < chip->chip.ngpio; i++, gpn++) { + BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios)); + s3c_gpios[gpn] = chip; + } +} +#endif /* CONFIG_S3C_GPIO_TRACK */ + +/* + * samsung_gpiolib_add() - add the Samsung gpio_chip. + * @chip: The chip to register + * + * This is a wrapper to gpiochip_add() that takes our specific gpio chip + * information and makes the necessary alterations for the platform and + * notes the information for use with the configuration systems and any + * other parts of the system. + */ + +static void __init samsung_gpiolib_add(struct samsung_gpio_chip *chip) +{ + struct gpio_chip *gc = &chip->chip; + int ret; + + BUG_ON(!chip->base); + BUG_ON(!gc->label); + BUG_ON(!gc->ngpio); + + spin_lock_init(&chip->lock); + + if (!gc->direction_input) + gc->direction_input = samsung_gpiolib_2bit_input; + if (!gc->direction_output) + gc->direction_output = samsung_gpiolib_2bit_output; + if (!gc->set) + gc->set = samsung_gpiolib_set; + if (!gc->get) + gc->get = samsung_gpiolib_get; + +#ifdef CONFIG_PM + if (chip->pm != NULL) { + if (!chip->pm->save || !chip->pm->resume) + printk(KERN_ERR "gpio: %s has missing PM functions\n", + gc->label); + } else + printk(KERN_ERR "gpio: %s has no PM function\n", gc->label); +#endif + + /* gpiochip_add() prints own failure message on error. */ + ret = gpiochip_add(gc); + if (ret >= 0) + s3c_gpiolib_track(chip); +} + +static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip, + int nr_chips, void __iomem *base) +{ + int i; + struct gpio_chip *gc = &chip->chip; + + for (i = 0 ; i < nr_chips; i++, chip++) { + if (!chip->config) + chip->config = &s3c24xx_gpiocfg_default; + if (!chip->pm) + chip->pm = __gpio_pm(&samsung_gpio_pm_2bit); + if ((base != NULL) && (chip->base == NULL)) + chip->base = base + ((i) * 0x10); + + if (!gc->direction_input) + gc->direction_input = samsung_gpiolib_2bit_input; + if (!gc->direction_output) + gc->direction_output = samsung_gpiolib_2bit_output; + + samsung_gpiolib_add(chip); + } +} + +static void __init samsung_gpiolib_add_2bit_chips(struct samsung_gpio_chip *chip, + int nr_chips, void __iomem *base, + unsigned int offset) +{ + int i; + + for (i = 0 ; i < nr_chips; i++, chip++) { + chip->chip.direction_input = samsung_gpiolib_2bit_input; + chip->chip.direction_output = samsung_gpiolib_2bit_output; + + if (!chip->config) + chip->config = &samsung_gpio_cfgs[7]; + if (!chip->pm) + chip->pm = __gpio_pm(&samsung_gpio_pm_2bit); + if ((base != NULL) && (chip->base == NULL)) + chip->base = base + ((i) * offset); + + samsung_gpiolib_add(chip); + } +} + +/* + * samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config. + * @chip: The gpio chip that is being configured. + * @nr_chips: The no of chips (gpio ports) for the GPIO being configured. + * + * This helper deal with the GPIO cases where the control register has 4 bits + * of control per GPIO, generally in the form of: + * 0000 = Input + * 0001 = Output + * others = Special functions (dependent on bank) + * + * Note, since the code to deal with the case where there are two control + * registers instead of one, we do not have a separate set of function + * (samsung_gpiolib_add_4bit2_chips)for each case. + */ + +static void __init samsung_gpiolib_add_4bit_chips(struct samsung_gpio_chip *chip, + int nr_chips, void __iomem *base) +{ + int i; + + for (i = 0 ; i < nr_chips; i++, chip++) { + chip->chip.direction_input = samsung_gpiolib_4bit_input; + chip->chip.direction_output = samsung_gpiolib_4bit_output; + + if (!chip->config) + chip->config = &samsung_gpio_cfgs[2]; + if (!chip->pm) + chip->pm = __gpio_pm(&samsung_gpio_pm_4bit); + if ((base != NULL) && (chip->base == NULL)) + chip->base = base + ((i) * 0x20); + + samsung_gpiolib_add(chip); + } +} + +static void __init samsung_gpiolib_add_4bit2_chips(struct samsung_gpio_chip *chip, + int nr_chips) +{ + for (; nr_chips > 0; nr_chips--, chip++) { + chip->chip.direction_input = samsung_gpiolib_4bit2_input; + chip->chip.direction_output = samsung_gpiolib_4bit2_output; + + if (!chip->config) + chip->config = &samsung_gpio_cfgs[2]; + if (!chip->pm) + chip->pm = __gpio_pm(&samsung_gpio_pm_4bit); + + samsung_gpiolib_add(chip); + } +} + +static void __init s5p64x0_gpiolib_add_rbank(struct samsung_gpio_chip *chip, + int nr_chips) +{ + for (; nr_chips > 0; nr_chips--, chip++) { + chip->chip.direction_input = s5p64x0_gpiolib_rbank_input; + chip->chip.direction_output = s5p64x0_gpiolib_rbank_output; + + if (!chip->pm) + chip->pm = __gpio_pm(&samsung_gpio_pm_4bit); + + samsung_gpiolib_add(chip); + } +} + +int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset) +{ + struct samsung_gpio_chip *samsung_chip = container_of(chip, struct samsung_gpio_chip, chip); + + return samsung_chip->irq_base + offset; +} + +#ifdef CONFIG_PLAT_S3C24XX +static int s3c24xx_gpiolib_fbank_to_irq(struct gpio_chip *chip, unsigned offset) +{ + if (offset < 4) + return IRQ_EINT0 + offset; + + if (offset < 8) + return IRQ_EINT4 + offset - 4; + + return -EINVAL; +} +#endif + +#ifdef CONFIG_PLAT_S3C64XX +static int s3c64xx_gpiolib_mbank_to_irq(struct gpio_chip *chip, unsigned pin) +{ + return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO; +} + +static int s3c64xx_gpiolib_lbank_to_irq(struct gpio_chip *chip, unsigned pin) +{ + return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO; +} +#endif + +struct samsung_gpio_chip s3c24xx_gpios[] = { +#ifdef CONFIG_PLAT_S3C24XX + { + .config = &s3c24xx_gpiocfg_banka, + .chip = { + .base = S3C2410_GPA(0), + .owner = THIS_MODULE, + .label = "GPIOA", + .ngpio = 24, + .direction_input = s3c24xx_gpiolib_banka_input, + .direction_output = s3c24xx_gpiolib_banka_output, + }, + }, { + .chip = { + .base = S3C2410_GPB(0), + .owner = THIS_MODULE, + .label = "GPIOB", + .ngpio = 16, + }, + }, { + .chip = { + .base = S3C2410_GPC(0), + .owner = THIS_MODULE, + .label = "GPIOC", + .ngpio = 16, + }, + }, { + .chip = { + .base = S3C2410_GPD(0), + .owner = THIS_MODULE, + .label = "GPIOD", + .ngpio = 16, + }, + }, { + .chip = { + .base = S3C2410_GPE(0), + .label = "GPIOE", + .owner = THIS_MODULE, + .ngpio = 16, + }, + }, { + .chip = { + .base = S3C2410_GPF(0), + .owner = THIS_MODULE, + .label = "GPIOF", + .ngpio = 8, + .to_irq = s3c24xx_gpiolib_fbank_to_irq, + }, + }, { + .irq_base = IRQ_EINT8, + .chip = { + .base = S3C2410_GPG(0), + .owner = THIS_MODULE, + .label = "GPIOG", + .ngpio = 16, + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .chip = { + .base = S3C2410_GPH(0), + .owner = THIS_MODULE, + .label = "GPIOH", + .ngpio = 11, + }, + }, + /* GPIOS for the S3C2443 and later devices. */ + { + .base = S3C2440_GPJCON, + .chip = { + .base = S3C2410_GPJ(0), + .owner = THIS_MODULE, + .label = "GPIOJ", + .ngpio = 16, + }, + }, { + .base = S3C2443_GPKCON, + .chip = { + .base = S3C2410_GPK(0), + .owner = THIS_MODULE, + .label = "GPIOK", + .ngpio = 16, + }, + }, { + .base = S3C2443_GPLCON, + .chip = { + .base = S3C2410_GPL(0), + .owner = THIS_MODULE, + .label = "GPIOL", + .ngpio = 15, + }, + }, { + .base = S3C2443_GPMCON, + .chip = { + .base = S3C2410_GPM(0), + .owner = THIS_MODULE, + .label = "GPIOM", + .ngpio = 2, + }, + }, +#endif +}; + +/* + * GPIO bank summary: + * + * Bank GPIOs Style SlpCon ExtInt Group + * A 8 4Bit Yes 1 + * B 7 4Bit Yes 1 + * C 8 4Bit Yes 2 + * D 5 4Bit Yes 3 + * E 5 4Bit Yes None + * F 16 2Bit Yes 4 [1] + * G 7 4Bit Yes 5 + * H 10 4Bit[2] Yes 6 + * I 16 2Bit Yes None + * J 12 2Bit Yes None + * K 16 4Bit[2] No None + * L 15 4Bit[2] No None + * M 6 4Bit No IRQ_EINT + * N 16 2Bit No IRQ_EINT + * O 16 2Bit Yes 7 + * P 15 2Bit Yes 8 + * Q 9 2Bit Yes 9 + * + * [1] BANKF pins 14,15 do not form part of the external interrupt sources + * [2] BANK has two control registers, GPxCON0 and GPxCON1 + */ + +static struct samsung_gpio_chip s3c64xx_gpios_4bit[] = { +#ifdef CONFIG_PLAT_S3C64XX + { + .chip = { + .base = S3C64XX_GPA(0), + .ngpio = S3C64XX_GPIO_A_NR, + .label = "GPA", + }, + }, { + .chip = { + .base = S3C64XX_GPB(0), + .ngpio = S3C64XX_GPIO_B_NR, + .label = "GPB", + }, + }, { + .chip = { + .base = S3C64XX_GPC(0), + .ngpio = S3C64XX_GPIO_C_NR, + .label = "GPC", + }, + }, { + .chip = { + .base = S3C64XX_GPD(0), + .ngpio = S3C64XX_GPIO_D_NR, + .label = "GPD", + }, + }, { + .config = &samsung_gpio_cfgs[0], + .chip = { + .base = S3C64XX_GPE(0), + .ngpio = S3C64XX_GPIO_E_NR, + .label = "GPE", + }, + }, { + .base = S3C64XX_GPG_BASE, + .chip = { + .base = S3C64XX_GPG(0), + .ngpio = S3C64XX_GPIO_G_NR, + .label = "GPG", + }, + }, { + .base = S3C64XX_GPM_BASE, + .config = &samsung_gpio_cfgs[1], + .chip = { + .base = S3C64XX_GPM(0), + .ngpio = S3C64XX_GPIO_M_NR, + .label = "GPM", + .to_irq = s3c64xx_gpiolib_mbank_to_irq, + }, + }, +#endif +}; + +static struct samsung_gpio_chip s3c64xx_gpios_4bit2[] = { +#ifdef CONFIG_PLAT_S3C64XX + { + .base = S3C64XX_GPH_BASE + 0x4, + .chip = { + .base = S3C64XX_GPH(0), + .ngpio = S3C64XX_GPIO_H_NR, + .label = "GPH", + }, + }, { + .base = S3C64XX_GPK_BASE + 0x4, + .config = &samsung_gpio_cfgs[0], + .chip = { + .base = S3C64XX_GPK(0), + .ngpio = S3C64XX_GPIO_K_NR, + .label = "GPK", + }, + }, { + .base = S3C64XX_GPL_BASE + 0x4, + .config = &samsung_gpio_cfgs[1], + .chip = { + .base = S3C64XX_GPL(0), + .ngpio = S3C64XX_GPIO_L_NR, + .label = "GPL", + .to_irq = s3c64xx_gpiolib_lbank_to_irq, + }, + }, +#endif +}; + +static struct samsung_gpio_chip s3c64xx_gpios_2bit[] = { +#ifdef CONFIG_PLAT_S3C64XX + { + .base = S3C64XX_GPF_BASE, + .config = &samsung_gpio_cfgs[6], + .chip = { + .base = S3C64XX_GPF(0), + .ngpio = S3C64XX_GPIO_F_NR, + .label = "GPF", + }, + }, { + .config = &samsung_gpio_cfgs[7], + .chip = { + .base = S3C64XX_GPI(0), + .ngpio = S3C64XX_GPIO_I_NR, + .label = "GPI", + }, + }, { + .config = &samsung_gpio_cfgs[7], + .chip = { + .base = S3C64XX_GPJ(0), + .ngpio = S3C64XX_GPIO_J_NR, + .label = "GPJ", + }, + }, { + .config = &samsung_gpio_cfgs[6], + .chip = { + .base = S3C64XX_GPO(0), + .ngpio = S3C64XX_GPIO_O_NR, + .label = "GPO", + }, + }, { + .config = &samsung_gpio_cfgs[6], + .chip = { + .base = S3C64XX_GPP(0), + .ngpio = S3C64XX_GPIO_P_NR, + .label = "GPP", + }, + }, { + .config = &samsung_gpio_cfgs[6], + .chip = { + .base = S3C64XX_GPQ(0), + .ngpio = S3C64XX_GPIO_Q_NR, + .label = "GPQ", + }, + }, { + .base = S3C64XX_GPN_BASE, + .irq_base = IRQ_EINT(0), + .config = &samsung_gpio_cfgs[5], + .chip = { + .base = S3C64XX_GPN(0), + .ngpio = S3C64XX_GPIO_N_NR, + .label = "GPN", + .to_irq = samsung_gpiolib_to_irq, + }, + }, +#endif +}; + +/* + * S5P6440 GPIO bank summary: + * + * Bank GPIOs Style SlpCon ExtInt Group + * A 6 4Bit Yes 1 + * B 7 4Bit Yes 1 + * C 8 4Bit Yes 2 + * F 2 2Bit Yes 4 [1] + * G 7 4Bit Yes 5 + * H 10 4Bit[2] Yes 6 + * I 16 2Bit Yes None + * J 12 2Bit Yes None + * N 16 2Bit No IRQ_EINT + * P 8 2Bit Yes 8 + * R 15 4Bit[2] Yes 8 + */ + +static struct samsung_gpio_chip s5p6440_gpios_4bit[] = { +#ifdef CONFIG_CPU_S5P6440 + { + .chip = { + .base = S5P6440_GPA(0), + .ngpio = S5P6440_GPIO_A_NR, + .label = "GPA", + }, + }, { + .chip = { + .base = S5P6440_GPB(0), + .ngpio = S5P6440_GPIO_B_NR, + .label = "GPB", + }, + }, { + .chip = { + .base = S5P6440_GPC(0), + .ngpio = S5P6440_GPIO_C_NR, + .label = "GPC", + }, + }, { + .base = S5P64X0_GPG_BASE, + .chip = { + .base = S5P6440_GPG(0), + .ngpio = S5P6440_GPIO_G_NR, + .label = "GPG", + }, + }, +#endif +}; + +static struct samsung_gpio_chip s5p6440_gpios_4bit2[] = { +#ifdef CONFIG_CPU_S5P6440 + { + .base = S5P64X0_GPH_BASE + 0x4, + .chip = { + .base = S5P6440_GPH(0), + .ngpio = S5P6440_GPIO_H_NR, + .label = "GPH", + }, + }, +#endif +}; + +static struct samsung_gpio_chip s5p6440_gpios_rbank[] = { +#ifdef CONFIG_CPU_S5P6440 + { + .base = S5P64X0_GPR_BASE + 0x4, + .config = &s5p64x0_gpio_cfg_rbank, + .chip = { + .base = S5P6440_GPR(0), + .ngpio = S5P6440_GPIO_R_NR, + .label = "GPR", + }, + }, +#endif +}; + +static struct samsung_gpio_chip s5p6440_gpios_2bit[] = { +#ifdef CONFIG_CPU_S5P6440 + { + .base = S5P64X0_GPF_BASE, + .config = &samsung_gpio_cfgs[6], + .chip = { + .base = S5P6440_GPF(0), + .ngpio = S5P6440_GPIO_F_NR, + .label = "GPF", + }, + }, { + .base = S5P64X0_GPI_BASE, + .config = &samsung_gpio_cfgs[4], + .chip = { + .base = S5P6440_GPI(0), + .ngpio = S5P6440_GPIO_I_NR, + .label = "GPI", + }, + }, { + .base = S5P64X0_GPJ_BASE, + .config = &samsung_gpio_cfgs[4], + .chip = { + .base = S5P6440_GPJ(0), + .ngpio = S5P6440_GPIO_J_NR, + .label = "GPJ", + }, + }, { + .base = S5P64X0_GPN_BASE, + .config = &samsung_gpio_cfgs[5], + .chip = { + .base = S5P6440_GPN(0), + .ngpio = S5P6440_GPIO_N_NR, + .label = "GPN", + }, + }, { + .base = S5P64X0_GPP_BASE, + .config = &samsung_gpio_cfgs[6], + .chip = { + .base = S5P6440_GPP(0), + .ngpio = S5P6440_GPIO_P_NR, + .label = "GPP", + }, + }, +#endif +}; + +/* + * S5P6450 GPIO bank summary: + * + * Bank GPIOs Style SlpCon ExtInt Group + * A 6 4Bit Yes 1 + * B 7 4Bit Yes 1 + * C 8 4Bit Yes 2 + * D 8 4Bit Yes None + * F 2 2Bit Yes None + * G 14 4Bit[2] Yes 5 + * H 10 4Bit[2] Yes 6 + * I 16 2Bit Yes None + * J 12 2Bit Yes None + * K 5 4Bit Yes None + * N 16 2Bit No IRQ_EINT + * P 11 2Bit Yes 8 + * Q 14 2Bit Yes None + * R 15 4Bit[2] Yes None + * S 8 2Bit Yes None + * + * [1] BANKF pins 14,15 do not form part of the external interrupt sources + * [2] BANK has two control registers, GPxCON0 and GPxCON1 + */ + +static struct samsung_gpio_chip s5p6450_gpios_4bit[] = { +#ifdef CONFIG_CPU_S5P6450 + { + .chip = { + .base = S5P6450_GPA(0), + .ngpio = S5P6450_GPIO_A_NR, + .label = "GPA", + }, + }, { + .chip = { + .base = S5P6450_GPB(0), + .ngpio = S5P6450_GPIO_B_NR, + .label = "GPB", + }, + }, { + .chip = { + .base = S5P6450_GPC(0), + .ngpio = S5P6450_GPIO_C_NR, + .label = "GPC", + }, + }, { + .chip = { + .base = S5P6450_GPD(0), + .ngpio = S5P6450_GPIO_D_NR, + .label = "GPD", + }, + }, { + .base = S5P6450_GPK_BASE, + .chip = { + .base = S5P6450_GPK(0), + .ngpio = S5P6450_GPIO_K_NR, + .label = "GPK", + }, + }, +#endif +}; + +static struct samsung_gpio_chip s5p6450_gpios_4bit2[] = { +#ifdef CONFIG_CPU_S5P6450 + { + .base = S5P64X0_GPG_BASE + 0x4, + .chip = { + .base = S5P6450_GPG(0), + .ngpio = S5P6450_GPIO_G_NR, + .label = "GPG", + }, + }, { + .base = S5P64X0_GPH_BASE + 0x4, + .chip = { + .base = S5P6450_GPH(0), + .ngpio = S5P6450_GPIO_H_NR, + .label = "GPH", + }, + }, +#endif +}; + +static struct samsung_gpio_chip s5p6450_gpios_rbank[] = { +#ifdef CONFIG_CPU_S5P6450 + { + .base = S5P64X0_GPR_BASE + 0x4, + .config = &s5p64x0_gpio_cfg_rbank, + .chip = { + .base = S5P6450_GPR(0), + .ngpio = S5P6450_GPIO_R_NR, + .label = "GPR", + }, + }, +#endif +}; + +static struct samsung_gpio_chip s5p6450_gpios_2bit[] = { +#ifdef CONFIG_CPU_S5P6450 + { + .base = S5P64X0_GPF_BASE, + .config = &samsung_gpio_cfgs[6], + .chip = { + .base = S5P6450_GPF(0), + .ngpio = S5P6450_GPIO_F_NR, + .label = "GPF", + }, + }, { + .base = S5P64X0_GPI_BASE, + .config = &samsung_gpio_cfgs[4], + .chip = { + .base = S5P6450_GPI(0), + .ngpio = S5P6450_GPIO_I_NR, + .label = "GPI", + }, + }, { + .base = S5P64X0_GPJ_BASE, + .config = &samsung_gpio_cfgs[4], + .chip = { + .base = S5P6450_GPJ(0), + .ngpio = S5P6450_GPIO_J_NR, + .label = "GPJ", + }, + }, { + .base = S5P64X0_GPN_BASE, + .config = &samsung_gpio_cfgs[5], + .chip = { + .base = S5P6450_GPN(0), + .ngpio = S5P6450_GPIO_N_NR, + .label = "GPN", + }, + }, { + .base = S5P64X0_GPP_BASE, + .config = &samsung_gpio_cfgs[6], + .chip = { + .base = S5P6450_GPP(0), + .ngpio = S5P6450_GPIO_P_NR, + .label = "GPP", + }, + }, { + .base = S5P6450_GPQ_BASE, + .config = &samsung_gpio_cfgs[5], + .chip = { + .base = S5P6450_GPQ(0), + .ngpio = S5P6450_GPIO_Q_NR, + .label = "GPQ", + }, + }, { + .base = S5P6450_GPS_BASE, + .config = &samsung_gpio_cfgs[6], + .chip = { + .base = S5P6450_GPS(0), + .ngpio = S5P6450_GPIO_S_NR, + .label = "GPS", + }, + }, +#endif +}; + +/* + * S5PC100 GPIO bank summary: + * + * Bank GPIOs Style INT Type + * A0 8 4Bit GPIO_INT0 + * A1 5 4Bit GPIO_INT1 + * B 8 4Bit GPIO_INT2 + * C 5 4Bit GPIO_INT3 + * D 7 4Bit GPIO_INT4 + * E0 8 4Bit GPIO_INT5 + * E1 6 4Bit GPIO_INT6 + * F0 8 4Bit GPIO_INT7 + * F1 8 4Bit GPIO_INT8 + * F2 8 4Bit GPIO_INT9 + * F3 4 4Bit GPIO_INT10 + * G0 8 4Bit GPIO_INT11 + * G1 3 4Bit GPIO_INT12 + * G2 7 4Bit GPIO_INT13 + * G3 7 4Bit GPIO_INT14 + * H0 8 4Bit WKUP_INT + * H1 8 4Bit WKUP_INT + * H2 8 4Bit WKUP_INT + * H3 8 4Bit WKUP_INT + * I 8 4Bit GPIO_INT15 + * J0 8 4Bit GPIO_INT16 + * J1 5 4Bit GPIO_INT17 + * J2 8 4Bit GPIO_INT18 + * J3 8 4Bit GPIO_INT19 + * J4 4 4Bit GPIO_INT20 + * K0 8 4Bit None + * K1 6 4Bit None + * K2 8 4Bit None + * K3 8 4Bit None + * L0 8 4Bit None + * L1 8 4Bit None + * L2 8 4Bit None + * L3 8 4Bit None + */ + +static struct samsung_gpio_chip s5pc100_gpios_4bit[] = { +#ifdef CONFIG_CPU_S5PC100 + { + .chip = { + .base = S5PC100_GPA0(0), + .ngpio = S5PC100_GPIO_A0_NR, + .label = "GPA0", + }, + }, { + .chip = { + .base = S5PC100_GPA1(0), + .ngpio = S5PC100_GPIO_A1_NR, + .label = "GPA1", + }, + }, { + .chip = { + .base = S5PC100_GPB(0), + .ngpio = S5PC100_GPIO_B_NR, + .label = "GPB", + }, + }, { + .chip = { + .base = S5PC100_GPC(0), + .ngpio = S5PC100_GPIO_C_NR, + .label = "GPC", + }, + }, { + .chip = { + .base = S5PC100_GPD(0), + .ngpio = S5PC100_GPIO_D_NR, + .label = "GPD", + }, + }, { + .chip = { + .base = S5PC100_GPE0(0), + .ngpio = S5PC100_GPIO_E0_NR, + .label = "GPE0", + }, + }, { + .chip = { + .base = S5PC100_GPE1(0), + .ngpio = S5PC100_GPIO_E1_NR, + .label = "GPE1", + }, + }, { + .chip = { + .base = S5PC100_GPF0(0), + .ngpio = S5PC100_GPIO_F0_NR, + .label = "GPF0", + }, + }, { + .chip = { + .base = S5PC100_GPF1(0), + .ngpio = S5PC100_GPIO_F1_NR, + .label = "GPF1", + }, + }, { + .chip = { + .base = S5PC100_GPF2(0), + .ngpio = S5PC100_GPIO_F2_NR, + .label = "GPF2", + }, + }, { + .chip = { + .base = S5PC100_GPF3(0), + .ngpio = S5PC100_GPIO_F3_NR, + .label = "GPF3", + }, + }, { + .chip = { + .base = S5PC100_GPG0(0), + .ngpio = S5PC100_GPIO_G0_NR, + .label = "GPG0", + }, + }, { + .chip = { + .base = S5PC100_GPG1(0), + .ngpio = S5PC100_GPIO_G1_NR, + .label = "GPG1", + }, + }, { + .chip = { + .base = S5PC100_GPG2(0), + .ngpio = S5PC100_GPIO_G2_NR, + .label = "GPG2", + }, + }, { + .chip = { + .base = S5PC100_GPG3(0), + .ngpio = S5PC100_GPIO_G3_NR, + .label = "GPG3", + }, + }, { + .chip = { + .base = S5PC100_GPI(0), + .ngpio = S5PC100_GPIO_I_NR, + .label = "GPI", + }, + }, { + .chip = { + .base = S5PC100_GPJ0(0), + .ngpio = S5PC100_GPIO_J0_NR, + .label = "GPJ0", + }, + }, { + .chip = { + .base = S5PC100_GPJ1(0), + .ngpio = S5PC100_GPIO_J1_NR, + .label = "GPJ1", + }, + }, { + .chip = { + .base = S5PC100_GPJ2(0), + .ngpio = S5PC100_GPIO_J2_NR, + .label = "GPJ2", + }, + }, { + .chip = { + .base = S5PC100_GPJ3(0), + .ngpio = S5PC100_GPIO_J3_NR, + .label = "GPJ3", + }, + }, { + .chip = { + .base = S5PC100_GPJ4(0), + .ngpio = S5PC100_GPIO_J4_NR, + .label = "GPJ4", + }, + }, { + .chip = { + .base = S5PC100_GPK0(0), + .ngpio = S5PC100_GPIO_K0_NR, + .label = "GPK0", + }, + }, { + .chip = { + .base = S5PC100_GPK1(0), + .ngpio = S5PC100_GPIO_K1_NR, + .label = "GPK1", + }, + }, { + .chip = { + .base = S5PC100_GPK2(0), + .ngpio = S5PC100_GPIO_K2_NR, + .label = "GPK2", + }, + }, { + .chip = { + .base = S5PC100_GPK3(0), + .ngpio = S5PC100_GPIO_K3_NR, + .label = "GPK3", + }, + }, { + .chip = { + .base = S5PC100_GPL0(0), + .ngpio = S5PC100_GPIO_L0_NR, + .label = "GPL0", + }, + }, { + .chip = { + .base = S5PC100_GPL1(0), + .ngpio = S5PC100_GPIO_L1_NR, + .label = "GPL1", + }, + }, { + .chip = { + .base = S5PC100_GPL2(0), + .ngpio = S5PC100_GPIO_L2_NR, + .label = "GPL2", + }, + }, { + .chip = { + .base = S5PC100_GPL3(0), + .ngpio = S5PC100_GPIO_L3_NR, + .label = "GPL3", + }, + }, { + .chip = { + .base = S5PC100_GPL4(0), + .ngpio = S5PC100_GPIO_L4_NR, + .label = "GPL4", + }, + }, { + .base = (S5P_VA_GPIO + 0xC00), + .irq_base = IRQ_EINT(0), + .chip = { + .base = S5PC100_GPH0(0), + .ngpio = S5PC100_GPIO_H0_NR, + .label = "GPH0", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO + 0xC20), + .irq_base = IRQ_EINT(8), + .chip = { + .base = S5PC100_GPH1(0), + .ngpio = S5PC100_GPIO_H1_NR, + .label = "GPH1", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO + 0xC40), + .irq_base = IRQ_EINT(16), + .chip = { + .base = S5PC100_GPH2(0), + .ngpio = S5PC100_GPIO_H2_NR, + .label = "GPH2", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO + 0xC60), + .irq_base = IRQ_EINT(24), + .chip = { + .base = S5PC100_GPH3(0), + .ngpio = S5PC100_GPIO_H3_NR, + .label = "GPH3", + .to_irq = samsung_gpiolib_to_irq, + }, + }, +#endif +}; + +/* + * Followings are the gpio banks in S5PV210/S5PC110 + * + * The 'config' member when left to NULL, is initialized to the default + * structure samsung_gpio_cfgs[3] in the init function below. + * + * The 'base' member is also initialized in the init function below. + * Note: The initialization of 'base' member of samsung_gpio_chip structure + * uses the above macro and depends on the banks being listed in order here. + */ + +static struct samsung_gpio_chip s5pv210_gpios_4bit[] = { +#ifdef CONFIG_CPU_S5PV210 + { + .chip = { + .base = S5PV210_GPA0(0), + .ngpio = S5PV210_GPIO_A0_NR, + .label = "GPA0", + }, + }, { + .chip = { + .base = S5PV210_GPA1(0), + .ngpio = S5PV210_GPIO_A1_NR, + .label = "GPA1", + }, + }, { + .chip = { + .base = S5PV210_GPB(0), + .ngpio = S5PV210_GPIO_B_NR, + .label = "GPB", + }, + }, { + .chip = { + .base = S5PV210_GPC0(0), + .ngpio = S5PV210_GPIO_C0_NR, + .label = "GPC0", + }, + }, { + .chip = { + .base = S5PV210_GPC1(0), + .ngpio = S5PV210_GPIO_C1_NR, + .label = "GPC1", + }, + }, { + .chip = { + .base = S5PV210_GPD0(0), + .ngpio = S5PV210_GPIO_D0_NR, + .label = "GPD0", + }, + }, { + .chip = { + .base = S5PV210_GPD1(0), + .ngpio = S5PV210_GPIO_D1_NR, + .label = "GPD1", + }, + }, { + .chip = { + .base = S5PV210_GPE0(0), + .ngpio = S5PV210_GPIO_E0_NR, + .label = "GPE0", + }, + }, { + .chip = { + .base = S5PV210_GPE1(0), + .ngpio = S5PV210_GPIO_E1_NR, + .label = "GPE1", + }, + }, { + .chip = { + .base = S5PV210_GPF0(0), + .ngpio = S5PV210_GPIO_F0_NR, + .label = "GPF0", + }, + }, { + .chip = { + .base = S5PV210_GPF1(0), + .ngpio = S5PV210_GPIO_F1_NR, + .label = "GPF1", + }, + }, { + .chip = { + .base = S5PV210_GPF2(0), + .ngpio = S5PV210_GPIO_F2_NR, + .label = "GPF2", + }, + }, { + .chip = { + .base = S5PV210_GPF3(0), + .ngpio = S5PV210_GPIO_F3_NR, + .label = "GPF3", + }, + }, { + .chip = { + .base = S5PV210_GPG0(0), + .ngpio = S5PV210_GPIO_G0_NR, + .label = "GPG0", + }, + }, { + .chip = { + .base = S5PV210_GPG1(0), + .ngpio = S5PV210_GPIO_G1_NR, + .label = "GPG1", + }, + }, { + .chip = { + .base = S5PV210_GPG2(0), + .ngpio = S5PV210_GPIO_G2_NR, + .label = "GPG2", + }, + }, { + .chip = { + .base = S5PV210_GPG3(0), + .ngpio = S5PV210_GPIO_G3_NR, + .label = "GPG3", + }, + }, { + .chip = { + .base = S5PV210_GPI(0), + .ngpio = S5PV210_GPIO_I_NR, + .label = "GPI", + }, + }, { + .chip = { + .base = S5PV210_GPJ0(0), + .ngpio = S5PV210_GPIO_J0_NR, + .label = "GPJ0", + }, + }, { + .chip = { + .base = S5PV210_GPJ1(0), + .ngpio = S5PV210_GPIO_J1_NR, + .label = "GPJ1", + }, + }, { + .chip = { + .base = S5PV210_GPJ2(0), + .ngpio = S5PV210_GPIO_J2_NR, + .label = "GPJ2", + }, + }, { + .chip = { + .base = S5PV210_GPJ3(0), + .ngpio = S5PV210_GPIO_J3_NR, + .label = "GPJ3", + }, + }, { + .chip = { + .base = S5PV210_GPJ4(0), + .ngpio = S5PV210_GPIO_J4_NR, + .label = "GPJ4", + }, + }, { + .chip = { + .base = S5PV210_MP01(0), + .ngpio = S5PV210_GPIO_MP01_NR, + .label = "MP01", + }, + }, { + .chip = { + .base = S5PV210_MP02(0), + .ngpio = S5PV210_GPIO_MP02_NR, + .label = "MP02", + }, + }, { + .chip = { + .base = S5PV210_MP03(0), + .ngpio = S5PV210_GPIO_MP03_NR, + .label = "MP03", + }, + }, { + .chip = { + .base = S5PV210_MP04(0), + .ngpio = S5PV210_GPIO_MP04_NR, + .label = "MP04", + }, + }, { + .chip = { + .base = S5PV210_MP05(0), + .ngpio = S5PV210_GPIO_MP05_NR, + .label = "MP05", + }, + }, { + .base = (S5P_VA_GPIO + 0xC00), + .irq_base = IRQ_EINT(0), + .chip = { + .base = S5PV210_GPH0(0), + .ngpio = S5PV210_GPIO_H0_NR, + .label = "GPH0", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO + 0xC20), + .irq_base = IRQ_EINT(8), + .chip = { + .base = S5PV210_GPH1(0), + .ngpio = S5PV210_GPIO_H1_NR, + .label = "GPH1", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO + 0xC40), + .irq_base = IRQ_EINT(16), + .chip = { + .base = S5PV210_GPH2(0), + .ngpio = S5PV210_GPIO_H2_NR, + .label = "GPH2", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO + 0xC60), + .irq_base = IRQ_EINT(24), + .chip = { + .base = S5PV210_GPH3(0), + .ngpio = S5PV210_GPIO_H3_NR, + .label = "GPH3", + .to_irq = samsung_gpiolib_to_irq, + }, + }, +#endif +}; + +/* + * Followings are the gpio banks in EXYNOS4210 + * + * The 'config' member when left to NULL, is initialized to the default + * structure samsung_gpio_cfgs[3] in the init function below. + * + * The 'base' member is also initialized in the init function below. + * Note: The initialization of 'base' member of samsung_gpio_chip structure + * uses the above macro and depends on the banks being listed in order here. + */ + +static struct samsung_gpio_chip exynos4_gpios_1[] = { +#ifdef CONFIG_ARCH_EXYNOS4 + { + .chip = { + .base = EXYNOS4_GPA0(0), + .ngpio = EXYNOS4_GPIO_A0_NR, + .label = "GPA0", + }, + }, { + .chip = { + .base = EXYNOS4_GPA1(0), + .ngpio = EXYNOS4_GPIO_A1_NR, + .label = "GPA1", + }, + }, { + .chip = { + .base = EXYNOS4_GPB(0), + .ngpio = EXYNOS4_GPIO_B_NR, + .label = "GPB", + }, + }, { + .chip = { + .base = EXYNOS4_GPC0(0), + .ngpio = EXYNOS4_GPIO_C0_NR, + .label = "GPC0", + }, + }, { + .chip = { + .base = EXYNOS4_GPC1(0), + .ngpio = EXYNOS4_GPIO_C1_NR, + .label = "GPC1", + }, + }, { + .chip = { + .base = EXYNOS4_GPD0(0), + .ngpio = EXYNOS4_GPIO_D0_NR, + .label = "GPD0", + }, + }, { + .chip = { + .base = EXYNOS4_GPD1(0), + .ngpio = EXYNOS4_GPIO_D1_NR, + .label = "GPD1", + }, + }, { + .chip = { + .base = EXYNOS4_GPE0(0), + .ngpio = EXYNOS4_GPIO_E0_NR, + .label = "GPE0", + }, + }, { + .chip = { + .base = EXYNOS4_GPE1(0), + .ngpio = EXYNOS4_GPIO_E1_NR, + .label = "GPE1", + }, + }, { + .chip = { + .base = EXYNOS4_GPE2(0), + .ngpio = EXYNOS4_GPIO_E2_NR, + .label = "GPE2", + }, + }, { + .chip = { + .base = EXYNOS4_GPE3(0), + .ngpio = EXYNOS4_GPIO_E3_NR, + .label = "GPE3", + }, + }, { + .chip = { + .base = EXYNOS4_GPE4(0), + .ngpio = EXYNOS4_GPIO_E4_NR, + .label = "GPE4", + }, + }, { + .chip = { + .base = EXYNOS4_GPF0(0), + .ngpio = EXYNOS4_GPIO_F0_NR, + .label = "GPF0", + }, + }, { + .chip = { + .base = EXYNOS4_GPF1(0), + .ngpio = EXYNOS4_GPIO_F1_NR, + .label = "GPF1", + }, + }, { + .chip = { + .base = EXYNOS4_GPF2(0), + .ngpio = EXYNOS4_GPIO_F2_NR, + .label = "GPF2", + }, + }, { + .chip = { + .base = EXYNOS4_GPF3(0), + .ngpio = EXYNOS4_GPIO_F3_NR, + .label = "GPF3", + }, + }, +#endif +}; + +static struct samsung_gpio_chip exynos4_gpios_2[] = { +#ifdef CONFIG_ARCH_EXYNOS4 + { + .chip = { + .base = EXYNOS4_GPJ0(0), + .ngpio = EXYNOS4_GPIO_J0_NR, + .label = "GPJ0", + }, + }, { + .chip = { + .base = EXYNOS4_GPJ1(0), + .ngpio = EXYNOS4_GPIO_J1_NR, + .label = "GPJ1", + }, + }, { + .chip = { + .base = EXYNOS4_GPK0(0), + .ngpio = EXYNOS4_GPIO_K0_NR, + .label = "GPK0", + }, + }, { + .chip = { + .base = EXYNOS4_GPK1(0), + .ngpio = EXYNOS4_GPIO_K1_NR, + .label = "GPK1", + }, + }, { + .chip = { + .base = EXYNOS4_GPK2(0), + .ngpio = EXYNOS4_GPIO_K2_NR, + .label = "GPK2", + }, + }, { + .chip = { + .base = EXYNOS4_GPK3(0), + .ngpio = EXYNOS4_GPIO_K3_NR, + .label = "GPK3", + }, + }, { + .chip = { + .base = EXYNOS4_GPL0(0), + .ngpio = EXYNOS4_GPIO_L0_NR, + .label = "GPL0", + }, + }, { + .chip = { + .base = EXYNOS4_GPL1(0), + .ngpio = EXYNOS4_GPIO_L1_NR, + .label = "GPL1", + }, + }, { + .chip = { + .base = EXYNOS4_GPL2(0), + .ngpio = EXYNOS4_GPIO_L2_NR, + .label = "GPL2", + }, + }, { + .config = &samsung_gpio_cfgs[0], + .chip = { + .base = EXYNOS4_GPY0(0), + .ngpio = EXYNOS4_GPIO_Y0_NR, + .label = "GPY0", + }, + }, { + .config = &samsung_gpio_cfgs[0], + .chip = { + .base = EXYNOS4_GPY1(0), + .ngpio = EXYNOS4_GPIO_Y1_NR, + .label = "GPY1", + }, + }, { + .config = &samsung_gpio_cfgs[0], + .chip = { + .base = EXYNOS4_GPY2(0), + .ngpio = EXYNOS4_GPIO_Y2_NR, + .label = "GPY2", + }, + }, { + .config = &samsung_gpio_cfgs[0], + .chip = { + .base = EXYNOS4_GPY3(0), + .ngpio = EXYNOS4_GPIO_Y3_NR, + .label = "GPY3", + }, + }, { + .config = &samsung_gpio_cfgs[0], + .chip = { + .base = EXYNOS4_GPY4(0), + .ngpio = EXYNOS4_GPIO_Y4_NR, + .label = "GPY4", + }, + }, { + .config = &samsung_gpio_cfgs[0], + .chip = { + .base = EXYNOS4_GPY5(0), + .ngpio = EXYNOS4_GPIO_Y5_NR, + .label = "GPY5", + }, + }, { + .config = &samsung_gpio_cfgs[0], + .chip = { + .base = EXYNOS4_GPY6(0), + .ngpio = EXYNOS4_GPIO_Y6_NR, + .label = "GPY6", + }, + }, { + .base = (S5P_VA_GPIO2 + 0xC00), + .config = &samsung_gpio_cfgs[3], + .irq_base = IRQ_EINT(0), + .chip = { + .base = EXYNOS4_GPX0(0), + .ngpio = EXYNOS4_GPIO_X0_NR, + .label = "GPX0", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO2 + 0xC20), + .config = &samsung_gpio_cfgs[3], + .irq_base = IRQ_EINT(8), + .chip = { + .base = EXYNOS4_GPX1(0), + .ngpio = EXYNOS4_GPIO_X1_NR, + .label = "GPX1", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO2 + 0xC40), + .config = &samsung_gpio_cfgs[3], + .irq_base = IRQ_EINT(16), + .chip = { + .base = EXYNOS4_GPX2(0), + .ngpio = EXYNOS4_GPIO_X2_NR, + .label = "GPX2", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO2 + 0xC60), + .config = &samsung_gpio_cfgs[3], + .irq_base = IRQ_EINT(24), + .chip = { + .base = EXYNOS4_GPX3(0), + .ngpio = EXYNOS4_GPIO_X3_NR, + .label = "GPX3", + .to_irq = samsung_gpiolib_to_irq, + }, + }, +#endif +}; + +static struct samsung_gpio_chip exynos4_gpios_3[] = { +#ifdef CONFIG_ARCH_EXYNOS4 + { + .chip = { + .base = EXYNOS4_GPZ(0), + .ngpio = EXYNOS4_GPIO_Z_NR, + .label = "GPZ", + }, + }, +#endif +}; + +/* TODO: cleanup soc_is_* */ +static __init int samsung_gpiolib_init(void) +{ + struct samsung_gpio_chip *chip; + int i, nr_chips; + int group = 0; + + samsung_gpiolib_set_cfg(samsung_gpio_cfgs, ARRAY_SIZE(samsung_gpio_cfgs)); + + if (soc_is_s3c24xx()) { + s3c24xx_gpiolib_add_chips(s3c24xx_gpios, + ARRAY_SIZE(s3c24xx_gpios), S3C24XX_VA_GPIO); + } else if (soc_is_s3c64xx()) { + samsung_gpiolib_add_2bit_chips(s3c64xx_gpios_2bit, + ARRAY_SIZE(s3c64xx_gpios_2bit), + S3C64XX_VA_GPIO + 0xE0, 0x20); + samsung_gpiolib_add_4bit_chips(s3c64xx_gpios_4bit, + ARRAY_SIZE(s3c64xx_gpios_4bit), + S3C64XX_VA_GPIO); + samsung_gpiolib_add_4bit2_chips(s3c64xx_gpios_4bit2, + ARRAY_SIZE(s3c64xx_gpios_4bit2)); + } else if (soc_is_s5p6440()) { + samsung_gpiolib_add_2bit_chips(s5p6440_gpios_2bit, + ARRAY_SIZE(s5p6440_gpios_2bit), NULL, 0x0); + samsung_gpiolib_add_4bit_chips(s5p6440_gpios_4bit, + ARRAY_SIZE(s5p6440_gpios_4bit), S5P_VA_GPIO); + samsung_gpiolib_add_4bit2_chips(s5p6440_gpios_4bit2, + ARRAY_SIZE(s5p6440_gpios_4bit2)); + s5p64x0_gpiolib_add_rbank(s5p6440_gpios_rbank, + ARRAY_SIZE(s5p6440_gpios_rbank)); + } else if (soc_is_s5p6450()) { + samsung_gpiolib_add_2bit_chips(s5p6450_gpios_2bit, + ARRAY_SIZE(s5p6450_gpios_2bit), NULL, 0x0); + samsung_gpiolib_add_4bit_chips(s5p6450_gpios_4bit, + ARRAY_SIZE(s5p6450_gpios_4bit), S5P_VA_GPIO); + samsung_gpiolib_add_4bit2_chips(s5p6450_gpios_4bit2, + ARRAY_SIZE(s5p6450_gpios_4bit2)); + s5p64x0_gpiolib_add_rbank(s5p6450_gpios_rbank, + ARRAY_SIZE(s5p6450_gpios_rbank)); + } else if (soc_is_s5pc100()) { + group = 0; + chip = s5pc100_gpios_4bit; + nr_chips = ARRAY_SIZE(s5pc100_gpios_4bit); + + for (i = 0; i < nr_chips; i++, chip++) { + if (!chip->config) { + chip->config = &samsung_gpio_cfgs[3]; + chip->group = group++; + } + } + samsung_gpiolib_add_4bit_chips(s5pc100_gpios_4bit, nr_chips, S5P_VA_GPIO); +#if defined(CONFIG_CPU_S5PC100) && defined(CONFIG_S5P_GPIO_INT) + s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR); +#endif + } else if (soc_is_s5pv210()) { + group = 0; + chip = s5pv210_gpios_4bit; + nr_chips = ARRAY_SIZE(s5pv210_gpios_4bit); + + for (i = 0; i < nr_chips; i++, chip++) { + if (!chip->config) { + chip->config = &samsung_gpio_cfgs[3]; + chip->group = group++; + } + } + samsung_gpiolib_add_4bit_chips(s5pv210_gpios_4bit, nr_chips, S5P_VA_GPIO); +#if defined(CONFIG_CPU_S5PV210) && defined(CONFIG_S5P_GPIO_INT) + s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR); +#endif + } else if (soc_is_exynos4210()) { + group = 0; + + /* gpio part1 */ + chip = exynos4_gpios_1; + nr_chips = ARRAY_SIZE(exynos4_gpios_1); + + for (i = 0; i < nr_chips; i++, chip++) { + if (!chip->config) { + chip->config = &exynos4_gpio_cfg; + chip->group = group++; + } + } + samsung_gpiolib_add_4bit_chips(exynos4_gpios_1, nr_chips, S5P_VA_GPIO1); + + /* gpio part2 */ + chip = exynos4_gpios_2; + nr_chips = ARRAY_SIZE(exynos4_gpios_2); + + for (i = 0; i < nr_chips; i++, chip++) { + if (!chip->config) { + chip->config = &exynos4_gpio_cfg; + chip->group = group++; + } + } + samsung_gpiolib_add_4bit_chips(exynos4_gpios_2, nr_chips, S5P_VA_GPIO2); + + /* gpio part3 */ + chip = exynos4_gpios_3; + nr_chips = ARRAY_SIZE(exynos4_gpios_3); + + for (i = 0; i < nr_chips; i++, chip++) { + if (!chip->config) { + chip->config = &exynos4_gpio_cfg; + chip->group = group++; + } + } + samsung_gpiolib_add_4bit_chips(exynos4_gpios_3, nr_chips, S5P_VA_GPIO3); + +#if defined(CONFIG_CPU_EXYNOS4210) && defined(CONFIG_S5P_GPIO_INT) + s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS); + s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS); +#endif + } + + return 0; +} +core_initcall(samsung_gpiolib_init); + +int s3c_gpio_cfgpin(unsigned int pin, unsigned int config) +{ + struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); + unsigned long flags; + int offset; + int ret; + + if (!chip) + return -EINVAL; + + offset = pin - chip->chip.base; + + samsung_gpio_lock(chip, flags); + ret = samsung_gpio_do_setcfg(chip, offset, config); + samsung_gpio_unlock(chip, flags); + + return ret; +} +EXPORT_SYMBOL(s3c_gpio_cfgpin); + +int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr, + unsigned int cfg) +{ + int ret; + + for (; nr > 0; nr--, start++) { + ret = s3c_gpio_cfgpin(start, cfg); + if (ret != 0) + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(s3c_gpio_cfgpin_range); + +int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr, + unsigned int cfg, samsung_gpio_pull_t pull) +{ + int ret; + + for (; nr > 0; nr--, start++) { + s3c_gpio_setpull(start, pull); + ret = s3c_gpio_cfgpin(start, cfg); + if (ret != 0) + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range); + +unsigned s3c_gpio_getcfg(unsigned int pin) +{ + struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); + unsigned long flags; + unsigned ret = 0; + int offset; + + if (chip) { + offset = pin - chip->chip.base; + + samsung_gpio_lock(chip, flags); + ret = samsung_gpio_do_getcfg(chip, offset); + samsung_gpio_unlock(chip, flags); + } + + return ret; +} +EXPORT_SYMBOL(s3c_gpio_getcfg); + +int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull) +{ + struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); + unsigned long flags; + int offset, ret; + + if (!chip) + return -EINVAL; + + offset = pin - chip->chip.base; + + samsung_gpio_lock(chip, flags); + ret = samsung_gpio_do_setpull(chip, offset, pull); + samsung_gpio_unlock(chip, flags); + + return ret; +} +EXPORT_SYMBOL(s3c_gpio_setpull); + +samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin) +{ + struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); + unsigned long flags; + int offset; + u32 pup = 0; + + if (chip) { + offset = pin - chip->chip.base; + + samsung_gpio_lock(chip, flags); + pup = samsung_gpio_do_getpull(chip, offset); + samsung_gpio_unlock(chip, flags); + } + + return (__force samsung_gpio_pull_t)pup; +} +EXPORT_SYMBOL(s3c_gpio_getpull); + +/* gpiolib wrappers until these are totally eliminated */ + +void s3c2410_gpio_pullup(unsigned int pin, unsigned int to) +{ + int ret; + + WARN_ON(to); /* should be none of these left */ + + if (!to) { + /* if pull is enabled, try first with up, and if that + * fails, try using down */ + + ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP); + if (ret) + s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN); + } else { + s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE); + } +} +EXPORT_SYMBOL(s3c2410_gpio_pullup); + +void s3c2410_gpio_setpin(unsigned int pin, unsigned int to) +{ + /* do this via gpiolib until all users removed */ + + gpio_request(pin, "temporary"); + gpio_set_value(pin, to); + gpio_free(pin); +} +EXPORT_SYMBOL(s3c2410_gpio_setpin); + +unsigned int s3c2410_gpio_getpin(unsigned int pin) +{ + struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); + unsigned long offs = pin - chip->chip.base; + + return __raw_readl(chip->base + 0x04) & (1 << offs); +} +EXPORT_SYMBOL(s3c2410_gpio_getpin); + +#ifdef CONFIG_S5P_GPIO_DRVSTR +s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin) +{ + struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); + unsigned int off; + void __iomem *reg; + int shift; + u32 drvstr; + + if (!chip) + return -EINVAL; + + off = pin - chip->chip.base; + shift = off * 2; + reg = chip->base + 0x0C; + + drvstr = __raw_readl(reg); + drvstr = drvstr >> shift; + drvstr &= 0x3; + + return (__force s5p_gpio_drvstr_t)drvstr; +} +EXPORT_SYMBOL(s5p_gpio_get_drvstr); + +int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr) +{ + struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); + unsigned int off; + void __iomem *reg; + int shift; + u32 tmp; + + if (!chip) + return -EINVAL; + + off = pin - chip->chip.base; + shift = off * 2; + reg = chip->base + 0x0C; + + tmp = __raw_readl(reg); + tmp &= ~(0x3 << shift); + tmp |= drvstr << shift; + + __raw_writel(tmp, reg); + + return 0; +} +EXPORT_SYMBOL(s5p_gpio_set_drvstr); +#endif /* CONFIG_S5P_GPIO_DRVSTR */ + +#ifdef CONFIG_PLAT_S3C24XX +unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change) +{ + unsigned long flags; + unsigned long misccr; + + local_irq_save(flags); + misccr = __raw_readl(S3C24XX_MISCCR); + misccr &= ~clear; + misccr ^= change; + __raw_writel(misccr, S3C24XX_MISCCR); + local_irq_restore(flags); + + return misccr; +} +EXPORT_SYMBOL(s3c2410_modify_misccr); +#endif diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 82db1850666..fe738f05309 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -499,6 +499,7 @@ void drm_connector_cleanup(struct drm_connector *connector) mutex_lock(&dev->mode_config.mutex); drm_mode_object_put(dev, &connector->base); list_del(&connector->head); + dev->mode_config.num_connector--; mutex_unlock(&dev->mode_config.mutex); } EXPORT_SYMBOL(drm_connector_cleanup); @@ -529,6 +530,7 @@ void drm_encoder_cleanup(struct drm_encoder *encoder) mutex_lock(&dev->mode_config.mutex); drm_mode_object_put(dev, &encoder->base); list_del(&encoder->head); + dev->mode_config.num_encoder--; mutex_unlock(&dev->mode_config.mutex); } EXPORT_SYMBOL(drm_encoder_cleanup); diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 802b61ac313..f7c6854eb4d 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -256,7 +256,6 @@ int drm_fb_helper_panic(struct notifier_block *n, unsigned long ununsed, { printk(KERN_ERR "panic occurred, switching back to text console\n"); return drm_fb_helper_force_kernel_mode(); - return 0; } EXPORT_SYMBOL(drm_fb_helper_panic); diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index ee1d701317f..56a8554d903 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -878,7 +878,7 @@ static void assert_panel_unlocked(struct drm_i915_private *dev_priv, int pp_reg, lvds_reg; u32 val; enum pipe panel_pipe = PIPE_A; - bool locked = locked; + bool locked = true; if (HAS_PCH_SPLIT(dev_priv->dev)) { pp_reg = PCH_PP_CONTROL; @@ -7238,8 +7238,6 @@ static void intel_setup_outputs(struct drm_device *dev) intel_encoder_clones(dev, encoder->clone_mask); } - intel_panel_setup_backlight(dev); - /* disable all the possible outputs/crtcs before entering KMS mode */ drm_helper_disable_unused_functions(dev); } diff --git a/drivers/gpu/drm/nouveau/nouveau_fence.c b/drivers/gpu/drm/nouveau/nouveau_fence.c index 8d02d875376..c919cfc8f2f 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fence.c +++ b/drivers/gpu/drm/nouveau/nouveau_fence.c @@ -530,7 +530,8 @@ nouveau_fence_channel_init(struct nouveau_channel *chan) nouveau_gpuobj_ref(NULL, &obj); if (ret) return ret; - } else { + } else + if (USE_SEMA(dev)) { /* map fence bo into channel's vm */ ret = nouveau_bo_vma_add(dev_priv->fence.bo, chan->vm, &chan->fence.vma); diff --git a/drivers/gpu/drm/nouveau/nouveau_sgdma.c b/drivers/gpu/drm/nouveau/nouveau_sgdma.c index c444cadbf84..2706cb3d871 100644 --- a/drivers/gpu/drm/nouveau/nouveau_sgdma.c +++ b/drivers/gpu/drm/nouveau/nouveau_sgdma.c @@ -37,8 +37,11 @@ nouveau_sgdma_populate(struct ttm_backend *be, unsigned long num_pages, return -ENOMEM; nvbe->ttm_alloced = kmalloc(sizeof(bool) * num_pages, GFP_KERNEL); - if (!nvbe->ttm_alloced) + if (!nvbe->ttm_alloced) { + kfree(nvbe->pages); + nvbe->pages = NULL; return -ENOMEM; + } nvbe->nr_pages = 0; while (num_pages--) { @@ -126,7 +129,7 @@ nv04_sgdma_bind(struct ttm_backend *be, struct ttm_mem_reg *mem) for (j = 0; j < PAGE_SIZE / NV_CTXDMA_PAGE_SIZE; j++, pte++) { nv_wo32(gpuobj, (pte * 4) + 0, offset_l | 3); - dma_offset += NV_CTXDMA_PAGE_SIZE; + offset_l += NV_CTXDMA_PAGE_SIZE; } } diff --git a/drivers/gpu/drm/nouveau/nv04_crtc.c b/drivers/gpu/drm/nouveau/nv04_crtc.c index 118261d4927..5e45398a9e2 100644 --- a/drivers/gpu/drm/nouveau/nv04_crtc.c +++ b/drivers/gpu/drm/nouveau/nv04_crtc.c @@ -781,11 +781,20 @@ nv04_crtc_do_mode_set_base(struct drm_crtc *crtc, struct drm_device *dev = crtc->dev; struct drm_nouveau_private *dev_priv = dev->dev_private; struct nv04_crtc_reg *regp = &dev_priv->mode_reg.crtc_reg[nv_crtc->index]; - struct drm_framebuffer *drm_fb = nv_crtc->base.fb; - struct nouveau_framebuffer *fb = nouveau_framebuffer(drm_fb); + struct drm_framebuffer *drm_fb; + struct nouveau_framebuffer *fb; int arb_burst, arb_lwm; int ret; + NV_DEBUG_KMS(dev, "index %d\n", nv_crtc->index); + + /* no fb bound */ + if (!atomic && !crtc->fb) { + NV_DEBUG_KMS(dev, "No FB bound\n"); + return 0; + } + + /* If atomic, we want to switch to the fb we were passed, so * now we update pointers to do that. (We don't pin; just * assume we're already pinned and update the base address.) @@ -794,6 +803,8 @@ nv04_crtc_do_mode_set_base(struct drm_crtc *crtc, drm_fb = passed_fb; fb = nouveau_framebuffer(passed_fb); } else { + drm_fb = crtc->fb; + fb = nouveau_framebuffer(crtc->fb); /* If not atomic, we can go ahead and pin, and unpin the * old fb we were passed. */ diff --git a/drivers/gpu/drm/nouveau/nv50_crtc.c b/drivers/gpu/drm/nouveau/nv50_crtc.c index 46ad59ea218..5d989073ba6 100644 --- a/drivers/gpu/drm/nouveau/nv50_crtc.c +++ b/drivers/gpu/drm/nouveau/nv50_crtc.c @@ -519,12 +519,18 @@ nv50_crtc_do_mode_set_base(struct drm_crtc *crtc, struct drm_device *dev = nv_crtc->base.dev; struct drm_nouveau_private *dev_priv = dev->dev_private; struct nouveau_channel *evo = nv50_display(dev)->master; - struct drm_framebuffer *drm_fb = nv_crtc->base.fb; - struct nouveau_framebuffer *fb = nouveau_framebuffer(drm_fb); + struct drm_framebuffer *drm_fb; + struct nouveau_framebuffer *fb; int ret; NV_DEBUG_KMS(dev, "index %d\n", nv_crtc->index); + /* no fb bound */ + if (!atomic && !crtc->fb) { + NV_DEBUG_KMS(dev, "No FB bound\n"); + return 0; + } + /* If atomic, we want to switch to the fb we were passed, so * now we update pointers to do that. (We don't pin; just * assume we're already pinned and update the base address.) @@ -533,6 +539,8 @@ nv50_crtc_do_mode_set_base(struct drm_crtc *crtc, drm_fb = passed_fb; fb = nouveau_framebuffer(passed_fb); } else { + drm_fb = crtc->fb; + fb = nouveau_framebuffer(crtc->fb); /* If not atomic, we can go ahead and pin, and unpin the * old fb we were passed. */ diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index fb5fa089886..e8a746712b5 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -41,6 +41,31 @@ static void evergreen_gpu_init(struct radeon_device *rdev); void evergreen_fini(struct radeon_device *rdev); static void evergreen_pcie_gen2_enable(struct radeon_device *rdev); +void evergreen_fix_pci_max_read_req_size(struct radeon_device *rdev) +{ + u16 ctl, v; + int cap, err; + + cap = pci_pcie_cap(rdev->pdev); + if (!cap) + return; + + err = pci_read_config_word(rdev->pdev, cap + PCI_EXP_DEVCTL, &ctl); + if (err) + return; + + v = (ctl & PCI_EXP_DEVCTL_READRQ) >> 12; + + /* if bios or OS sets MAX_READ_REQUEST_SIZE to an invalid value, fix it + * to avoid hangs or perfomance issues + */ + if ((v == 0) || (v == 6) || (v == 7)) { + ctl &= ~PCI_EXP_DEVCTL_READRQ; + ctl |= (2 << 12); + pci_write_config_word(rdev->pdev, cap + PCI_EXP_DEVCTL, ctl); + } +} + void evergreen_pre_page_flip(struct radeon_device *rdev, int crtc) { /* enable the pflip int */ @@ -1357,6 +1382,7 @@ int evergreen_cp_resume(struct radeon_device *rdev) SOFT_RESET_PA | SOFT_RESET_SH | SOFT_RESET_VGT | + SOFT_RESET_SPI | SOFT_RESET_SX)); RREG32(GRBM_SOFT_RESET); mdelay(15); @@ -1378,7 +1404,8 @@ int evergreen_cp_resume(struct radeon_device *rdev) /* Initialize the ring buffer's read and write pointers */ WREG32(CP_RB_CNTL, tmp | RB_RPTR_WR_ENA); WREG32(CP_RB_RPTR_WR, 0); - WREG32(CP_RB_WPTR, 0); + rdev->cp.wptr = 0; + WREG32(CP_RB_WPTR, rdev->cp.wptr); /* set the wb address wether it's enabled or not */ WREG32(CP_RB_RPTR_ADDR, @@ -1400,7 +1427,6 @@ int evergreen_cp_resume(struct radeon_device *rdev) WREG32(CP_DEBUG, (1 << 27) | (1 << 28)); rdev->cp.rptr = RREG32(CP_RB_RPTR); - rdev->cp.wptr = RREG32(CP_RB_WPTR); evergreen_cp_start(rdev); rdev->cp.ready = true; @@ -1862,6 +1888,8 @@ static void evergreen_gpu_init(struct radeon_device *rdev) WREG32(GRBM_CNTL, GRBM_READ_TIMEOUT(0xff)); + evergreen_fix_pci_max_read_req_size(rdev); + cc_gc_shader_pipe_config = RREG32(CC_GC_SHADER_PIPE_CONFIG) & ~2; cc_gc_shader_pipe_config |= @@ -3143,21 +3171,23 @@ int evergreen_suspend(struct radeon_device *rdev) } int evergreen_copy_blit(struct radeon_device *rdev, - uint64_t src_offset, uint64_t dst_offset, - unsigned num_pages, struct radeon_fence *fence) + uint64_t src_offset, + uint64_t dst_offset, + unsigned num_gpu_pages, + struct radeon_fence *fence) { int r; mutex_lock(&rdev->r600_blit.mutex); rdev->r600_blit.vb_ib = NULL; - r = evergreen_blit_prepare_copy(rdev, num_pages * RADEON_GPU_PAGE_SIZE); + r = evergreen_blit_prepare_copy(rdev, num_gpu_pages * RADEON_GPU_PAGE_SIZE); if (r) { if (rdev->r600_blit.vb_ib) radeon_ib_free(rdev, &rdev->r600_blit.vb_ib); mutex_unlock(&rdev->r600_blit.mutex); return r; } - evergreen_kms_blit_copy(rdev, src_offset, dst_offset, num_pages * RADEON_GPU_PAGE_SIZE); + evergreen_kms_blit_copy(rdev, src_offset, dst_offset, num_gpu_pages * RADEON_GPU_PAGE_SIZE); evergreen_blit_done_copy(rdev, fence); mutex_unlock(&rdev->r600_blit.mutex); return 0; diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index 44c4750f451..99fbd793c08 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -39,6 +39,7 @@ extern int evergreen_mc_wait_for_idle(struct radeon_device *rdev); extern void evergreen_mc_program(struct radeon_device *rdev); extern void evergreen_irq_suspend(struct radeon_device *rdev); extern int evergreen_mc_init(struct radeon_device *rdev); +extern void evergreen_fix_pci_max_read_req_size(struct radeon_device *rdev); #define EVERGREEN_PFP_UCODE_SIZE 1120 #define EVERGREEN_PM4_UCODE_SIZE 1376 @@ -669,6 +670,8 @@ static void cayman_gpu_init(struct radeon_device *rdev) WREG32(GRBM_CNTL, GRBM_READ_TIMEOUT(0xff)); + evergreen_fix_pci_max_read_req_size(rdev); + mc_shared_chmap = RREG32(MC_SHARED_CHMAP); mc_arb_ramcfg = RREG32(MC_ARB_RAMCFG); @@ -1159,6 +1162,7 @@ int cayman_cp_resume(struct radeon_device *rdev) SOFT_RESET_PA | SOFT_RESET_SH | SOFT_RESET_VGT | + SOFT_RESET_SPI | SOFT_RESET_SX)); RREG32(GRBM_SOFT_RESET); mdelay(15); @@ -1183,7 +1187,8 @@ int cayman_cp_resume(struct radeon_device *rdev) /* Initialize the ring buffer's read and write pointers */ WREG32(CP_RB0_CNTL, tmp | RB_RPTR_WR_ENA); - WREG32(CP_RB0_WPTR, 0); + rdev->cp.wptr = 0; + WREG32(CP_RB0_WPTR, rdev->cp.wptr); /* set the wb address wether it's enabled or not */ WREG32(CP_RB0_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET) & 0xFFFFFFFC); @@ -1203,7 +1208,6 @@ int cayman_cp_resume(struct radeon_device *rdev) WREG32(CP_RB0_BASE, rdev->cp.gpu_addr >> 8); rdev->cp.rptr = RREG32(CP_RB0_RPTR); - rdev->cp.wptr = RREG32(CP_RB0_WPTR); /* ring1 - compute only */ /* Set ring buffer size */ @@ -1216,7 +1220,8 @@ int cayman_cp_resume(struct radeon_device *rdev) /* Initialize the ring buffer's read and write pointers */ WREG32(CP_RB1_CNTL, tmp | RB_RPTR_WR_ENA); - WREG32(CP_RB1_WPTR, 0); + rdev->cp1.wptr = 0; + WREG32(CP_RB1_WPTR, rdev->cp1.wptr); /* set the wb address wether it's enabled or not */ WREG32(CP_RB1_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP1_RPTR_OFFSET) & 0xFFFFFFFC); @@ -1228,7 +1233,6 @@ int cayman_cp_resume(struct radeon_device *rdev) WREG32(CP_RB1_BASE, rdev->cp1.gpu_addr >> 8); rdev->cp1.rptr = RREG32(CP_RB1_RPTR); - rdev->cp1.wptr = RREG32(CP_RB1_WPTR); /* ring2 - compute only */ /* Set ring buffer size */ @@ -1241,7 +1245,8 @@ int cayman_cp_resume(struct radeon_device *rdev) /* Initialize the ring buffer's read and write pointers */ WREG32(CP_RB2_CNTL, tmp | RB_RPTR_WR_ENA); - WREG32(CP_RB2_WPTR, 0); + rdev->cp2.wptr = 0; + WREG32(CP_RB2_WPTR, rdev->cp2.wptr); /* set the wb address wether it's enabled or not */ WREG32(CP_RB2_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP2_RPTR_OFFSET) & 0xFFFFFFFC); @@ -1253,7 +1258,6 @@ int cayman_cp_resume(struct radeon_device *rdev) WREG32(CP_RB2_BASE, rdev->cp2.gpu_addr >> 8); rdev->cp2.rptr = RREG32(CP_RB2_RPTR); - rdev->cp2.wptr = RREG32(CP_RB2_WPTR); /* start the rings */ cayman_cp_start(rdev); diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index f2204cb1ccd..7fcdbbbf297 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -721,11 +721,11 @@ void r100_fence_ring_emit(struct radeon_device *rdev, int r100_copy_blit(struct radeon_device *rdev, uint64_t src_offset, uint64_t dst_offset, - unsigned num_pages, + unsigned num_gpu_pages, struct radeon_fence *fence) { uint32_t cur_pages; - uint32_t stride_bytes = PAGE_SIZE; + uint32_t stride_bytes = RADEON_GPU_PAGE_SIZE; uint32_t pitch; uint32_t stride_pixels; unsigned ndw; @@ -737,7 +737,7 @@ int r100_copy_blit(struct radeon_device *rdev, /* radeon pitch is /64 */ pitch = stride_bytes / 64; stride_pixels = stride_bytes / 4; - num_loops = DIV_ROUND_UP(num_pages, 8191); + num_loops = DIV_ROUND_UP(num_gpu_pages, 8191); /* Ask for enough room for blit + flush + fence */ ndw = 64 + (10 * num_loops); @@ -746,12 +746,12 @@ int r100_copy_blit(struct radeon_device *rdev, DRM_ERROR("radeon: moving bo (%d) asking for %u dw.\n", r, ndw); return -EINVAL; } - while (num_pages > 0) { - cur_pages = num_pages; + while (num_gpu_pages > 0) { + cur_pages = num_gpu_pages; if (cur_pages > 8191) { cur_pages = 8191; } - num_pages -= cur_pages; + num_gpu_pages -= cur_pages; /* pages are in Y direction - height page width in X direction - width */ @@ -773,8 +773,8 @@ int r100_copy_blit(struct radeon_device *rdev, radeon_ring_write(rdev, (0x1fff) | (0x1fff << 16)); radeon_ring_write(rdev, 0); radeon_ring_write(rdev, (0x1fff) | (0x1fff << 16)); - radeon_ring_write(rdev, num_pages); - radeon_ring_write(rdev, num_pages); + radeon_ring_write(rdev, num_gpu_pages); + radeon_ring_write(rdev, num_gpu_pages); radeon_ring_write(rdev, cur_pages | (stride_pixels << 16)); } radeon_ring_write(rdev, PACKET0(RADEON_DSTCACHE_CTLSTAT, 0)); @@ -990,7 +990,8 @@ int r100_cp_init(struct radeon_device *rdev, unsigned ring_size) /* Force read & write ptr to 0 */ WREG32(RADEON_CP_RB_CNTL, tmp | RADEON_RB_RPTR_WR_ENA | RADEON_RB_NO_UPDATE); WREG32(RADEON_CP_RB_RPTR_WR, 0); - WREG32(RADEON_CP_RB_WPTR, 0); + rdev->cp.wptr = 0; + WREG32(RADEON_CP_RB_WPTR, rdev->cp.wptr); /* set the wb address whether it's enabled or not */ WREG32(R_00070C_CP_RB_RPTR_ADDR, @@ -1007,9 +1008,6 @@ int r100_cp_init(struct radeon_device *rdev, unsigned ring_size) WREG32(RADEON_CP_RB_CNTL, tmp); udelay(10); rdev->cp.rptr = RREG32(RADEON_CP_RB_RPTR); - rdev->cp.wptr = RREG32(RADEON_CP_RB_WPTR); - /* protect against crazy HW on resume */ - rdev->cp.wptr &= rdev->cp.ptr_mask; /* Set cp mode to bus mastering & enable cp*/ WREG32(RADEON_CP_CSQ_MODE, REG_SET(RADEON_INDIRECT2_START, indirect2_start) | diff --git a/drivers/gpu/drm/radeon/r200.c b/drivers/gpu/drm/radeon/r200.c index f2405830041..a1f3ba063c2 100644 --- a/drivers/gpu/drm/radeon/r200.c +++ b/drivers/gpu/drm/radeon/r200.c @@ -84,7 +84,7 @@ static int r200_get_vtx_size_0(uint32_t vtx_fmt_0) int r200_copy_dma(struct radeon_device *rdev, uint64_t src_offset, uint64_t dst_offset, - unsigned num_pages, + unsigned num_gpu_pages, struct radeon_fence *fence) { uint32_t size; @@ -93,7 +93,7 @@ int r200_copy_dma(struct radeon_device *rdev, int r = 0; /* radeon pitch is /64 */ - size = num_pages << PAGE_SHIFT; + size = num_gpu_pages << RADEON_GPU_PAGE_SHIFT; num_loops = DIV_ROUND_UP(size, 0x1FFFFF); r = radeon_ring_lock(rdev, num_loops * 4 + 64); if (r) { diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index aa5571b73aa..720dd99163f 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -2209,7 +2209,8 @@ int r600_cp_resume(struct radeon_device *rdev) /* Initialize the ring buffer's read and write pointers */ WREG32(CP_RB_CNTL, tmp | RB_RPTR_WR_ENA); WREG32(CP_RB_RPTR_WR, 0); - WREG32(CP_RB_WPTR, 0); + rdev->cp.wptr = 0; + WREG32(CP_RB_WPTR, rdev->cp.wptr); /* set the wb address whether it's enabled or not */ WREG32(CP_RB_RPTR_ADDR, @@ -2231,7 +2232,6 @@ int r600_cp_resume(struct radeon_device *rdev) WREG32(CP_DEBUG, (1 << 27) | (1 << 28)); rdev->cp.rptr = RREG32(CP_RB_RPTR); - rdev->cp.wptr = RREG32(CP_RB_WPTR); r600_cp_start(rdev); rdev->cp.ready = true; @@ -2353,21 +2353,23 @@ void r600_fence_ring_emit(struct radeon_device *rdev, } int r600_copy_blit(struct radeon_device *rdev, - uint64_t src_offset, uint64_t dst_offset, - unsigned num_pages, struct radeon_fence *fence) + uint64_t src_offset, + uint64_t dst_offset, + unsigned num_gpu_pages, + struct radeon_fence *fence) { int r; mutex_lock(&rdev->r600_blit.mutex); rdev->r600_blit.vb_ib = NULL; - r = r600_blit_prepare_copy(rdev, num_pages * RADEON_GPU_PAGE_SIZE); + r = r600_blit_prepare_copy(rdev, num_gpu_pages * RADEON_GPU_PAGE_SIZE); if (r) { if (rdev->r600_blit.vb_ib) radeon_ib_free(rdev, &rdev->r600_blit.vb_ib); mutex_unlock(&rdev->r600_blit.mutex); return r; } - r600_kms_blit_copy(rdev, src_offset, dst_offset, num_pages * RADEON_GPU_PAGE_SIZE); + r600_kms_blit_copy(rdev, src_offset, dst_offset, num_gpu_pages * RADEON_GPU_PAGE_SIZE); r600_blit_done_copy(rdev, fence); mutex_unlock(&rdev->r600_blit.mutex); return 0; diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 32807baf55e..c1e056b35b2 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -322,6 +322,7 @@ union radeon_gart_table { #define RADEON_GPU_PAGE_SIZE 4096 #define RADEON_GPU_PAGE_MASK (RADEON_GPU_PAGE_SIZE - 1) +#define RADEON_GPU_PAGE_SHIFT 12 struct radeon_gart { dma_addr_t table_addr; @@ -914,17 +915,17 @@ struct radeon_asic { int (*copy_blit)(struct radeon_device *rdev, uint64_t src_offset, uint64_t dst_offset, - unsigned num_pages, + unsigned num_gpu_pages, struct radeon_fence *fence); int (*copy_dma)(struct radeon_device *rdev, uint64_t src_offset, uint64_t dst_offset, - unsigned num_pages, + unsigned num_gpu_pages, struct radeon_fence *fence); int (*copy)(struct radeon_device *rdev, uint64_t src_offset, uint64_t dst_offset, - unsigned num_pages, + unsigned num_gpu_pages, struct radeon_fence *fence); uint32_t (*get_engine_clock)(struct radeon_device *rdev); void (*set_engine_clock)(struct radeon_device *rdev, uint32_t eng_clock); diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h index 3d7a0d7c6a9..3dedaa07aac 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.h +++ b/drivers/gpu/drm/radeon/radeon_asic.h @@ -75,7 +75,7 @@ uint32_t r100_pll_rreg(struct radeon_device *rdev, uint32_t reg); int r100_copy_blit(struct radeon_device *rdev, uint64_t src_offset, uint64_t dst_offset, - unsigned num_pages, + unsigned num_gpu_pages, struct radeon_fence *fence); int r100_set_surface_reg(struct radeon_device *rdev, int reg, uint32_t tiling_flags, uint32_t pitch, @@ -143,7 +143,7 @@ extern void r100_post_page_flip(struct radeon_device *rdev, int crtc); extern int r200_copy_dma(struct radeon_device *rdev, uint64_t src_offset, uint64_t dst_offset, - unsigned num_pages, + unsigned num_gpu_pages, struct radeon_fence *fence); void r200_set_safe_registers(struct radeon_device *rdev); @@ -311,7 +311,7 @@ void r600_ring_ib_execute(struct radeon_device *rdev, struct radeon_ib *ib); int r600_ring_test(struct radeon_device *rdev); int r600_copy_blit(struct radeon_device *rdev, uint64_t src_offset, uint64_t dst_offset, - unsigned num_pages, struct radeon_fence *fence); + unsigned num_gpu_pages, struct radeon_fence *fence); void r600_hpd_init(struct radeon_device *rdev); void r600_hpd_fini(struct radeon_device *rdev); bool r600_hpd_sense(struct radeon_device *rdev, enum radeon_hpd_id hpd); @@ -403,7 +403,7 @@ void evergreen_bandwidth_update(struct radeon_device *rdev); void evergreen_ring_ib_execute(struct radeon_device *rdev, struct radeon_ib *ib); int evergreen_copy_blit(struct radeon_device *rdev, uint64_t src_offset, uint64_t dst_offset, - unsigned num_pages, struct radeon_fence *fence); + unsigned num_gpu_pages, struct radeon_fence *fence); void evergreen_hpd_init(struct radeon_device *rdev); void evergreen_hpd_fini(struct radeon_device *rdev); bool evergreen_hpd_sense(struct radeon_device *rdev, enum radeon_hpd_id hpd); diff --git a/drivers/gpu/drm/radeon/radeon_clocks.c b/drivers/gpu/drm/radeon/radeon_clocks.c index dcd0863e31a..b6e18c8db9f 100644 --- a/drivers/gpu/drm/radeon/radeon_clocks.c +++ b/drivers/gpu/drm/radeon/radeon_clocks.c @@ -219,6 +219,9 @@ void radeon_get_clock_info(struct drm_device *dev) } else { DRM_INFO("Using generic clock info\n"); + /* may need to be per card */ + rdev->clock.max_pixel_clock = 35000; + if (rdev->flags & RADEON_IS_IGP) { p1pll->reference_freq = 1432; p2pll->reference_freq = 1432; diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index e0138b674ac..63675241c7f 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -3298,6 +3298,14 @@ void radeon_combios_asic_init(struct drm_device *dev) rdev->pdev->subsystem_device == 0x30a4) return; + /* quirk for rs4xx Compaq Presario V5245EU laptop to make it resume + * - it hangs on resume inside the dynclk 1 table. + */ + if (rdev->family == CHIP_RS480 && + rdev->pdev->subsystem_vendor == 0x103c && + rdev->pdev->subsystem_device == 0x30ae) + return; + /* DYN CLK 1 */ table = combios_get_table_offset(dev, COMBIOS_DYN_CLK_1_TABLE); if (table) diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 7f65940f918..c4b8741dbf5 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -466,6 +466,16 @@ static bool radeon_connector_needs_extended_probe(struct radeon_device *dev, (supported_device == ATOM_DEVICE_DFP2_SUPPORT)) return true; } + /* TOSHIBA Satellite L300D with ATI Mobility Radeon x1100 + * (RS690M) sends data to i2c bus for a HDMI connector that + * is not implemented */ + if ((dev->pdev->device == 0x791f) && + (dev->pdev->subsystem_vendor == 0x1179) && + (dev->pdev->subsystem_device == 0xff68)) { + if ((connector_type == DRM_MODE_CONNECTOR_HDMIA) && + (supported_device == ATOM_DEVICE_DFP2_SUPPORT)) + return true; + } /* Default: no EDID header probe required for DDC probing */ return false; @@ -1287,12 +1297,33 @@ radeon_dp_detect(struct drm_connector *connector, bool force) if (!radeon_dig_connector->edp_on) atombios_set_edp_panel_power(connector, ATOM_TRANSMITTER_ACTION_POWER_OFF); - } else { - /* need to setup ddc on the bridge */ - if (radeon_connector_encoder_is_dp_bridge(connector)) { + } else if (radeon_connector_encoder_is_dp_bridge(connector)) { + /* DP bridges are always DP */ + radeon_dig_connector->dp_sink_type = CONNECTOR_OBJECT_ID_DISPLAYPORT; + /* get the DPCD from the bridge */ + radeon_dp_getdpcd(radeon_connector); + + if (radeon_hpd_sense(rdev, radeon_connector->hpd.hpd)) + ret = connector_status_connected; + else { + /* need to setup ddc on the bridge */ if (encoder) radeon_atom_ext_encoder_setup_ddc(encoder); + if (radeon_ddc_probe(radeon_connector, + radeon_connector->requires_extended_probe)) + ret = connector_status_connected; + } + + if ((ret == connector_status_disconnected) && + radeon_connector->dac_load_detect) { + struct drm_encoder *encoder = radeon_best_single_encoder(connector); + struct drm_encoder_helper_funcs *encoder_funcs; + if (encoder) { + encoder_funcs = encoder->helper_private; + ret = encoder_funcs->detect(encoder, connector); + } } + } else { radeon_dig_connector->dp_sink_type = radeon_dp_getsinktype(radeon_connector); if (radeon_hpd_sense(rdev, radeon_connector->hpd.hpd)) { ret = connector_status_connected; @@ -1308,16 +1339,6 @@ radeon_dp_detect(struct drm_connector *connector, bool force) ret = connector_status_connected; } } - - if ((ret == connector_status_disconnected) && - radeon_connector->dac_load_detect) { - struct drm_encoder *encoder = radeon_best_single_encoder(connector); - struct drm_encoder_helper_funcs *encoder_funcs; - if (encoder) { - encoder_funcs = encoder->helper_private; - ret = encoder_funcs->detect(encoder, connector); - } - } } radeon_connector_update_scratch_regs(connector, ret); diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index a3b011b4946..b51e15725c6 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -301,6 +301,8 @@ void radeon_vram_location(struct radeon_device *rdev, struct radeon_mc *mc, u64 mc->mc_vram_size = mc->aper_size; } mc->vram_end = mc->vram_start + mc->mc_vram_size - 1; + if (radeon_vram_limit && radeon_vram_limit < mc->real_vram_size) + mc->real_vram_size = radeon_vram_limit; dev_info(rdev->dev, "VRAM: %lluM 0x%016llX - 0x%016llX (%lluM used)\n", mc->mc_vram_size >> 20, mc->vram_start, mc->vram_end, mc->real_vram_size >> 20); diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 1a858944e4f..6adb3e58aff 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -473,8 +473,8 @@ pflip_cleanup: spin_lock_irqsave(&dev->event_lock, flags); radeon_crtc->unpin_work = NULL; unlock_free: - drm_gem_object_unreference_unlocked(old_radeon_fb->obj); spin_unlock_irqrestore(&dev->event_lock, flags); + drm_gem_object_unreference_unlocked(old_radeon_fb->obj); radeon_fence_unref(&work->fence); kfree(work); @@ -707,16 +707,21 @@ int radeon_ddc_get_modes(struct radeon_connector *radeon_connector) radeon_router_select_ddc_port(radeon_connector); if ((radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_DisplayPort) || - (radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_eDP)) { + (radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_eDP) || + radeon_connector_encoder_is_dp_bridge(&radeon_connector->base)) { struct radeon_connector_atom_dig *dig = radeon_connector->con_priv; + if ((dig->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT || dig->dp_sink_type == CONNECTOR_OBJECT_ID_eDP) && dig->dp_i2c_bus) - radeon_connector->edid = drm_get_edid(&radeon_connector->base, &dig->dp_i2c_bus->adapter); - } - if (!radeon_connector->ddc_bus) - return -1; - if (!radeon_connector->edid) { - radeon_connector->edid = drm_get_edid(&radeon_connector->base, &radeon_connector->ddc_bus->adapter); + radeon_connector->edid = drm_get_edid(&radeon_connector->base, + &dig->dp_i2c_bus->adapter); + else if (radeon_connector->ddc_bus && !radeon_connector->edid) + radeon_connector->edid = drm_get_edid(&radeon_connector->base, + &radeon_connector->ddc_bus->adapter); + } else { + if (radeon_connector->ddc_bus && !radeon_connector->edid) + radeon_connector->edid = drm_get_edid(&radeon_connector->base, + &radeon_connector->ddc_bus->adapter); } if (!radeon_connector->edid) { diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 319d85d7e75..13690f3eb4a 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -1507,7 +1507,14 @@ radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode) switch (mode) { case DRM_MODE_DPMS_ON: args.ucAction = ATOM_ENABLE; - atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); + /* workaround for DVOOutputControl on some RS690 systems */ + if (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_DDI) { + u32 reg = RREG32(RADEON_BIOS_3_SCRATCH); + WREG32(RADEON_BIOS_3_SCRATCH, reg & ~ATOM_S3_DFP2I_ACTIVE); + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); + WREG32(RADEON_BIOS_3_SCRATCH, reg); + } else + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) { args.ucAction = ATOM_LCD_BLON; atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); diff --git a/drivers/gpu/drm/radeon/radeon_test.c b/drivers/gpu/drm/radeon/radeon_test.c index dee4a0c1b4b..602fa3541c4 100644 --- a/drivers/gpu/drm/radeon/radeon_test.c +++ b/drivers/gpu/drm/radeon/radeon_test.c @@ -40,10 +40,14 @@ void radeon_test_moves(struct radeon_device *rdev) size = 1024 * 1024; /* Number of tests = - * (Total GTT - IB pool - writeback page - ring buffer) / test size + * (Total GTT - IB pool - writeback page - ring buffers) / test size */ - n = ((u32)(rdev->mc.gtt_size - RADEON_IB_POOL_SIZE*64*1024 - RADEON_GPU_PAGE_SIZE - - rdev->cp.ring_size)) / size; + n = rdev->mc.gtt_size - RADEON_IB_POOL_SIZE*64*1024 - rdev->cp.ring_size; + if (rdev->wb.wb_obj) + n -= RADEON_GPU_PAGE_SIZE; + if (rdev->ih.ring_obj) + n -= rdev->ih.ring_size; + n /= size; gtt_obj = kzalloc(n * sizeof(*gtt_obj), GFP_KERNEL); if (!gtt_obj) { @@ -132,9 +136,15 @@ void radeon_test_moves(struct radeon_device *rdev) gtt_start++, vram_start++) { if (*vram_start != gtt_start) { DRM_ERROR("Incorrect GTT->VRAM copy %d: Got 0x%p, " - "expected 0x%p (GTT map 0x%p-0x%p)\n", - i, *vram_start, gtt_start, gtt_map, - gtt_end); + "expected 0x%p (GTT/VRAM offset " + "0x%16llx/0x%16llx)\n", + i, *vram_start, gtt_start, + (unsigned long long) + (gtt_addr - rdev->mc.gtt_start + + (void*)gtt_start - gtt_map), + (unsigned long long) + (vram_addr - rdev->mc.vram_start + + (void*)gtt_start - gtt_map)); radeon_bo_kunmap(vram_obj); goto out_cleanup; } @@ -175,9 +185,15 @@ void radeon_test_moves(struct radeon_device *rdev) gtt_start++, vram_start++) { if (*gtt_start != vram_start) { DRM_ERROR("Incorrect VRAM->GTT copy %d: Got 0x%p, " - "expected 0x%p (VRAM map 0x%p-0x%p)\n", - i, *gtt_start, vram_start, vram_map, - vram_end); + "expected 0x%p (VRAM/GTT offset " + "0x%16llx/0x%16llx)\n", + i, *gtt_start, vram_start, + (unsigned long long) + (vram_addr - rdev->mc.vram_start + + (void*)vram_start - vram_map), + (unsigned long long) + (gtt_addr - rdev->mc.gtt_start + + (void*)vram_start - vram_map)); radeon_bo_kunmap(gtt_obj[i]); goto out_cleanup; } diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c index 60125ddba1e..0b5468bfaf5 100644 --- a/drivers/gpu/drm/radeon/radeon_ttm.c +++ b/drivers/gpu/drm/radeon/radeon_ttm.c @@ -277,7 +277,12 @@ static int radeon_move_blit(struct ttm_buffer_object *bo, DRM_ERROR("Trying to move memory with CP turned off.\n"); return -EINVAL; } - r = radeon_copy(rdev, old_start, new_start, new_mem->num_pages, fence); + + BUILD_BUG_ON((PAGE_SIZE % RADEON_GPU_PAGE_SIZE) != 0); + + r = radeon_copy(rdev, old_start, new_start, + new_mem->num_pages * (PAGE_SIZE / RADEON_GPU_PAGE_SIZE), /* GPU pages */ + fence); /* FIXME: handle copy error */ r = ttm_bo_move_accel_cleanup(bo, (void *)fence, NULL, evict, no_wait_reserve, no_wait_gpu, new_mem); @@ -450,6 +455,29 @@ static int radeon_ttm_io_mem_reserve(struct ttm_bo_device *bdev, struct ttm_mem_ return -EINVAL; mem->bus.base = rdev->mc.aper_base; mem->bus.is_iomem = true; +#ifdef __alpha__ + /* + * Alpha: use bus.addr to hold the ioremap() return, + * so we can modify bus.base below. + */ + if (mem->placement & TTM_PL_FLAG_WC) + mem->bus.addr = + ioremap_wc(mem->bus.base + mem->bus.offset, + mem->bus.size); + else + mem->bus.addr = + ioremap_nocache(mem->bus.base + mem->bus.offset, + mem->bus.size); + + /* + * Alpha: Use just the bus offset plus + * the hose/domain memory base for bus.base. + * It then can be used to build PTEs for VRAM + * access, as done in ttm_bo_vm_fault(). + */ + mem->bus.base = (mem->bus.base & 0x0ffffffffUL) + + rdev->ddev->hose->dense_mem_base; +#endif break; default: return -EINVAL; diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index 56619f64b6b..ef06194c5aa 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -353,8 +353,10 @@ static int ttm_bo_add_ttm(struct ttm_buffer_object *bo, bool zero_alloc) ret = ttm_tt_set_user(bo->ttm, current, bo->buffer_start, bo->num_pages); - if (unlikely(ret != 0)) + if (unlikely(ret != 0)) { ttm_tt_destroy(bo->ttm); + bo->ttm = NULL; + } break; default: printk(KERN_ERR TTM_PFX "Illegal buffer object type\n"); @@ -390,10 +392,13 @@ static int ttm_bo_handle_move_mem(struct ttm_buffer_object *bo, * Create and bind a ttm if required. */ - if (!(new_man->flags & TTM_MEMTYPE_FLAG_FIXED) && (bo->ttm == NULL)) { - ret = ttm_bo_add_ttm(bo, false); - if (ret) - goto out_err; + if (!(new_man->flags & TTM_MEMTYPE_FLAG_FIXED)) { + if (bo->ttm == NULL) { + bool zero = !(old_man->flags & TTM_MEMTYPE_FLAG_FIXED); + ret = ttm_bo_add_ttm(bo, zero); + if (ret) + goto out_err; + } ret = ttm_tt_set_placement_caching(bo->ttm, mem->placement); if (ret) diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c index 77dbf408c0d..ae3c6f5dd2b 100644 --- a/drivers/gpu/drm/ttm/ttm_bo_util.c +++ b/drivers/gpu/drm/ttm/ttm_bo_util.c @@ -635,13 +635,13 @@ int ttm_bo_move_accel_cleanup(struct ttm_buffer_object *bo, if (ret) return ret; - ttm_bo_free_old_node(bo); if ((man->flags & TTM_MEMTYPE_FLAG_FIXED) && (bo->ttm != NULL)) { ttm_tt_unbind(bo->ttm); ttm_tt_destroy(bo->ttm); bo->ttm = NULL; } + ttm_bo_free_old_node(bo); } else { /** * This should help pipeline ordinary buffer moves. diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 306b15f39c9..1130a898712 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -589,6 +589,7 @@ config HID_WACOM_POWER_SUPPLY config HID_WIIMOTE tristate "Nintendo Wii Remote support" depends on BT_HIDP + depends on LEDS_CLASS ---help--- Support for the Nintendo Wii Remote bluetooth device. diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c index b85744fe846..18b3bc646bf 100644 --- a/drivers/hid/hid-apple.c +++ b/drivers/hid/hid-apple.c @@ -444,6 +444,12 @@ static const struct hid_device_id apple_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | APPLE_RDESC_JIS }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_REVB_ANSI), + .driver_data = APPLE_HAS_FN }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_REVB_ISO), + .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_REVB_JIS), + .driver_data = APPLE_HAS_FN }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO), diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 1a5cf0c9cfc..242353df3dc 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1340,6 +1340,9 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_ISO) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_JIS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_REVB_ANSI) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_REVB_ISO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_REVB_JIS) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index db63ccf21cc..7484e1b6724 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -109,6 +109,9 @@ #define USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI 0x0245 #define USB_DEVICE_ID_APPLE_WELLSPRING5_ISO 0x0246 #define USB_DEVICE_ID_APPLE_WELLSPRING5_JIS 0x0247 +#define USB_DEVICE_ID_APPLE_ALU_REVB_ANSI 0x024f +#define USB_DEVICE_ID_APPLE_ALU_REVB_ISO 0x0250 +#define USB_DEVICE_ID_APPLE_ALU_REVB_JIS 0x0251 #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI 0x0239 #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO 0x023a #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS 0x023b @@ -274,6 +277,7 @@ #define USB_DEVICE_ID_PENPOWER 0x00f4 #define USB_VENDOR_ID_GREENASIA 0x0e8f +#define USB_DEVICE_ID_GREENASIA_DUAL_USB_JOYPAD 0x3013 #define USB_VENDOR_ID_GRETAGMACBETH 0x0971 #define USB_DEVICE_ID_GRETAGMACBETH_HUEY 0x2005 @@ -576,6 +580,9 @@ #define USB_DEVICE_ID_SAMSUNG_IR_REMOTE 0x0001 #define USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE 0x0600 +#define USB_VENDOR_ID_SIGMA_MICRO 0x1c4f +#define USB_DEVICE_ID_SIGMA_MICRO_KEYBOARD 0x0002 + #define USB_VENDOR_ID_SKYCABLE 0x1223 #define USB_DEVICE_ID_SKYCABLE_WIRELESS_PRESENTER 0x3F07 diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c index 0ec91c18a42..f0fbd7bd239 100644 --- a/drivers/hid/hid-magicmouse.c +++ b/drivers/hid/hid-magicmouse.c @@ -81,6 +81,28 @@ MODULE_PARM_DESC(report_undeciphered, "Report undeciphered multi-touch state fie #define NO_TOUCHES -1 #define SINGLE_TOUCH_UP -2 +/* Touch surface information. Dimension is in hundredths of a mm, min and max + * are in units. */ +#define MOUSE_DIMENSION_X (float)9056 +#define MOUSE_MIN_X -1100 +#define MOUSE_MAX_X 1258 +#define MOUSE_RES_X ((MOUSE_MAX_X - MOUSE_MIN_X) / (MOUSE_DIMENSION_X / 100)) +#define MOUSE_DIMENSION_Y (float)5152 +#define MOUSE_MIN_Y -1589 +#define MOUSE_MAX_Y 2047 +#define MOUSE_RES_Y ((MOUSE_MAX_Y - MOUSE_MIN_Y) / (MOUSE_DIMENSION_Y / 100)) + +#define TRACKPAD_DIMENSION_X (float)13000 +#define TRACKPAD_MIN_X -2909 +#define TRACKPAD_MAX_X 3167 +#define TRACKPAD_RES_X \ + ((TRACKPAD_MAX_X - TRACKPAD_MIN_X) / (TRACKPAD_DIMENSION_X / 100)) +#define TRACKPAD_DIMENSION_Y (float)11000 +#define TRACKPAD_MIN_Y -2456 +#define TRACKPAD_MAX_Y 2565 +#define TRACKPAD_RES_Y \ + ((TRACKPAD_MAX_Y - TRACKPAD_MIN_Y) / (TRACKPAD_DIMENSION_Y / 100)) + /** * struct magicmouse_sc - Tracks Magic Mouse-specific data. * @input: Input device through which we report events. @@ -406,17 +428,31 @@ static void magicmouse_setup_input(struct input_dev *input, struct hid_device *h * inverse of the reported Y. */ if (input->id.product == USB_DEVICE_ID_APPLE_MAGICMOUSE) { - input_set_abs_params(input, ABS_MT_POSITION_X, -1100, - 1358, 4, 0); - input_set_abs_params(input, ABS_MT_POSITION_Y, -1589, - 2047, 4, 0); + input_set_abs_params(input, ABS_MT_POSITION_X, + MOUSE_MIN_X, MOUSE_MAX_X, 4, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, + MOUSE_MIN_Y, MOUSE_MAX_Y, 4, 0); + + input_abs_set_res(input, ABS_MT_POSITION_X, + MOUSE_RES_X); + input_abs_set_res(input, ABS_MT_POSITION_Y, + MOUSE_RES_Y); } else { /* USB_DEVICE_ID_APPLE_MAGICTRACKPAD */ - input_set_abs_params(input, ABS_X, -2909, 3167, 4, 0); - input_set_abs_params(input, ABS_Y, -2456, 2565, 4, 0); - input_set_abs_params(input, ABS_MT_POSITION_X, -2909, - 3167, 4, 0); - input_set_abs_params(input, ABS_MT_POSITION_Y, -2456, - 2565, 4, 0); + input_set_abs_params(input, ABS_X, TRACKPAD_MIN_X, + TRACKPAD_MAX_X, 4, 0); + input_set_abs_params(input, ABS_Y, TRACKPAD_MIN_Y, + TRACKPAD_MAX_Y, 4, 0); + input_set_abs_params(input, ABS_MT_POSITION_X, + TRACKPAD_MIN_X, TRACKPAD_MAX_X, 4, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, + TRACKPAD_MIN_Y, TRACKPAD_MAX_Y, 4, 0); + + input_abs_set_res(input, ABS_X, TRACKPAD_RES_X); + input_abs_set_res(input, ABS_Y, TRACKPAD_RES_Y); + input_abs_set_res(input, ABS_MT_POSITION_X, + TRACKPAD_RES_X); + input_abs_set_res(input, ABS_MT_POSITION_Y, + TRACKPAD_RES_Y); } input_set_events_per_packet(input, 60); @@ -501,9 +537,17 @@ static int magicmouse_probe(struct hid_device *hdev, } report->size = 6; + /* + * Some devices repond with 'invalid report id' when feature + * report switching it into multitouch mode is sent to it. + * + * This results in -EIO from the _raw low-level transport callback, + * but there seems to be no other way of switching the mode. + * Thus the super-ugly hacky success check below. + */ ret = hdev->hid_output_raw_report(hdev, feature, sizeof(feature), HID_FEATURE_REPORT); - if (ret != sizeof(feature)) { + if (ret != -EIO && ret != sizeof(feature)) { hid_err(hdev, "unable to request touch data (%d)\n", ret); goto err_stop_hw; } diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c index 06888323828..72ca689b647 100644 --- a/drivers/hid/hid-wacom.c +++ b/drivers/hid/hid-wacom.c @@ -353,11 +353,7 @@ static int wacom_probe(struct hid_device *hdev, if (ret) { hid_warn(hdev, "can't create sysfs battery attribute, err: %d\n", ret); - /* - * battery attribute is not critical for the tablet, but if it - * failed then there is no need to create ac attribute - */ - goto move_on; + goto err_battery; } wdata->ac.properties = wacom_ac_props; @@ -371,18 +367,14 @@ static int wacom_probe(struct hid_device *hdev, if (ret) { hid_warn(hdev, "can't create ac battery attribute, err: %d\n", ret); - /* - * ac attribute is not critical for the tablet, but if it - * failed then we don't want to battery attribute to exist - */ - power_supply_unregister(&wdata->battery); + goto err_ac; } - -move_on: #endif hidinput = list_entry(hdev->inputs.next, struct hid_input, list); input = hidinput->input; + __set_bit(INPUT_PROP_POINTER, input->propbit); + /* Basics */ input->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_REL); @@ -416,6 +408,13 @@ move_on: return 0; +#ifdef CONFIG_HID_WACOM_POWER_SUPPLY +err_ac: + power_supply_unregister(&wdata->battery); +err_battery: + device_remove_file(&hdev->dev, &dev_attr_speed); + hid_hw_stop(hdev); +#endif err_free: kfree(wdata); return ret; @@ -426,6 +425,7 @@ static void wacom_remove(struct hid_device *hdev) #ifdef CONFIG_HID_WACOM_POWER_SUPPLY struct wacom_data *wdata = hid_get_drvdata(hdev); #endif + device_remove_file(&hdev->dev, &dev_attr_speed); hid_hw_stop(hdev); #ifdef CONFIG_HID_WACOM_POWER_SUPPLY diff --git a/drivers/hid/hid-wiimote.c b/drivers/hid/hid-wiimote.c index a594383ce03..85a02e5f9fe 100644 --- a/drivers/hid/hid-wiimote.c +++ b/drivers/hid/hid-wiimote.c @@ -10,10 +10,10 @@ * any later version. */ -#include <linux/atomic.h> #include <linux/device.h> #include <linux/hid.h> #include <linux/input.h> +#include <linux/leds.h> #include <linux/module.h> #include <linux/spinlock.h> #include "hid-ids.h" @@ -33,9 +33,9 @@ struct wiimote_state { }; struct wiimote_data { - atomic_t ready; struct hid_device *hdev; struct input_dev *input; + struct led_classdev *leds[4]; spinlock_t qlock; __u8 head; @@ -53,8 +53,15 @@ struct wiimote_data { #define WIIPROTO_FLAGS_LEDS (WIIPROTO_FLAG_LED1 | WIIPROTO_FLAG_LED2 | \ WIIPROTO_FLAG_LED3 | WIIPROTO_FLAG_LED4) +/* return flag for led \num */ +#define WIIPROTO_FLAG_LED(num) (WIIPROTO_FLAG_LED1 << (num - 1)) + enum wiiproto_reqs { + WIIPROTO_REQ_NULL = 0x0, WIIPROTO_REQ_LED = 0x11, + WIIPROTO_REQ_DRM = 0x12, + WIIPROTO_REQ_STATUS = 0x20, + WIIPROTO_REQ_RETURN = 0x22, WIIPROTO_REQ_DRM_K = 0x30, }; @@ -87,9 +94,6 @@ static __u16 wiiproto_keymap[] = { BTN_MODE, /* WIIPROTO_KEY_HOME */ }; -#define dev_to_wii(pdev) hid_get_drvdata(container_of(pdev, struct hid_device, \ - dev)) - static ssize_t wiimote_hid_send(struct hid_device *hdev, __u8 *buffer, size_t count) { @@ -192,66 +196,96 @@ static void wiiproto_req_leds(struct wiimote_data *wdata, int leds) wiimote_queue(wdata, cmd, sizeof(cmd)); } -#define wiifs_led_show_set(num) \ -static ssize_t wiifs_led_show_##num(struct device *dev, \ - struct device_attribute *attr, char *buf) \ -{ \ - struct wiimote_data *wdata = dev_to_wii(dev); \ - unsigned long flags; \ - int state; \ - \ - if (!atomic_read(&wdata->ready)) \ - return -EBUSY; \ - \ - spin_lock_irqsave(&wdata->state.lock, flags); \ - state = !!(wdata->state.flags & WIIPROTO_FLAG_LED##num); \ - spin_unlock_irqrestore(&wdata->state.lock, flags); \ - \ - return sprintf(buf, "%d\n", state); \ -} \ -static ssize_t wiifs_led_set_##num(struct device *dev, \ - struct device_attribute *attr, const char *buf, size_t count) \ -{ \ - struct wiimote_data *wdata = dev_to_wii(dev); \ - int tmp = simple_strtoul(buf, NULL, 10); \ - unsigned long flags; \ - __u8 state; \ - \ - if (!atomic_read(&wdata->ready)) \ - return -EBUSY; \ - \ - spin_lock_irqsave(&wdata->state.lock, flags); \ - \ - state = wdata->state.flags; \ - \ - if (tmp) \ - wiiproto_req_leds(wdata, state | WIIPROTO_FLAG_LED##num);\ - else \ - wiiproto_req_leds(wdata, state & ~WIIPROTO_FLAG_LED##num);\ - \ - spin_unlock_irqrestore(&wdata->state.lock, flags); \ - \ - return count; \ -} \ -static DEVICE_ATTR(led##num, S_IRUGO | S_IWUSR, wiifs_led_show_##num, \ - wiifs_led_set_##num) - -wiifs_led_show_set(1); -wiifs_led_show_set(2); -wiifs_led_show_set(3); -wiifs_led_show_set(4); +/* + * Check what peripherals of the wiimote are currently + * active and select a proper DRM that supports all of + * the requested data inputs. + */ +static __u8 select_drm(struct wiimote_data *wdata) +{ + return WIIPROTO_REQ_DRM_K; +} + +static void wiiproto_req_drm(struct wiimote_data *wdata, __u8 drm) +{ + __u8 cmd[3]; + + if (drm == WIIPROTO_REQ_NULL) + drm = select_drm(wdata); + + cmd[0] = WIIPROTO_REQ_DRM; + cmd[1] = 0; + cmd[2] = drm; + + wiimote_queue(wdata, cmd, sizeof(cmd)); +} + +static enum led_brightness wiimote_leds_get(struct led_classdev *led_dev) +{ + struct wiimote_data *wdata; + struct device *dev = led_dev->dev->parent; + int i; + unsigned long flags; + bool value = false; + + wdata = hid_get_drvdata(container_of(dev, struct hid_device, dev)); + + for (i = 0; i < 4; ++i) { + if (wdata->leds[i] == led_dev) { + spin_lock_irqsave(&wdata->state.lock, flags); + value = wdata->state.flags & WIIPROTO_FLAG_LED(i + 1); + spin_unlock_irqrestore(&wdata->state.lock, flags); + break; + } + } + + return value ? LED_FULL : LED_OFF; +} + +static void wiimote_leds_set(struct led_classdev *led_dev, + enum led_brightness value) +{ + struct wiimote_data *wdata; + struct device *dev = led_dev->dev->parent; + int i; + unsigned long flags; + __u8 state, flag; + + wdata = hid_get_drvdata(container_of(dev, struct hid_device, dev)); + + for (i = 0; i < 4; ++i) { + if (wdata->leds[i] == led_dev) { + flag = WIIPROTO_FLAG_LED(i + 1); + spin_lock_irqsave(&wdata->state.lock, flags); + state = wdata->state.flags; + if (value == LED_OFF) + wiiproto_req_leds(wdata, state & ~flag); + else + wiiproto_req_leds(wdata, state | flag); + spin_unlock_irqrestore(&wdata->state.lock, flags); + break; + } + } +} static int wiimote_input_event(struct input_dev *dev, unsigned int type, unsigned int code, int value) { + return 0; +} + +static int wiimote_input_open(struct input_dev *dev) +{ struct wiimote_data *wdata = input_get_drvdata(dev); - if (!atomic_read(&wdata->ready)) - return -EBUSY; - /* smp_rmb: Make sure wdata->xy is available when wdata->ready is 1 */ - smp_rmb(); + return hid_hw_open(wdata->hdev); +} - return 0; +static void wiimote_input_close(struct input_dev *dev) +{ + struct wiimote_data *wdata = input_get_drvdata(dev); + + hid_hw_close(wdata->hdev); } static void handler_keys(struct wiimote_data *wdata, const __u8 *payload) @@ -281,6 +315,26 @@ static void handler_keys(struct wiimote_data *wdata, const __u8 *payload) input_sync(wdata->input); } +static void handler_status(struct wiimote_data *wdata, const __u8 *payload) +{ + handler_keys(wdata, payload); + + /* on status reports the drm is reset so we need to resend the drm */ + wiiproto_req_drm(wdata, WIIPROTO_REQ_NULL); +} + +static void handler_return(struct wiimote_data *wdata, const __u8 *payload) +{ + __u8 err = payload[3]; + __u8 cmd = payload[2]; + + handler_keys(wdata, payload); + + if (err) + hid_warn(wdata->hdev, "Remote error %hhu on req %hhu\n", err, + cmd); +} + struct wiiproto_handler { __u8 id; size_t size; @@ -288,6 +342,8 @@ struct wiiproto_handler { }; static struct wiiproto_handler handlers[] = { + { .id = WIIPROTO_REQ_STATUS, .size = 6, .func = handler_status }, + { .id = WIIPROTO_REQ_RETURN, .size = 4, .func = handler_return }, { .id = WIIPROTO_REQ_DRM_K, .size = 2, .func = handler_keys }, { .id = 0 } }; @@ -300,11 +356,6 @@ static int wiimote_hid_event(struct hid_device *hdev, struct hid_report *report, int i; unsigned long flags; - if (!atomic_read(&wdata->ready)) - return -EBUSY; - /* smp_rmb: Make sure wdata->xy is available when wdata->ready is 1 */ - smp_rmb(); - if (size < 1) return -EINVAL; @@ -321,6 +372,58 @@ static int wiimote_hid_event(struct hid_device *hdev, struct hid_report *report, return 0; } +static void wiimote_leds_destroy(struct wiimote_data *wdata) +{ + int i; + struct led_classdev *led; + + for (i = 0; i < 4; ++i) { + if (wdata->leds[i]) { + led = wdata->leds[i]; + wdata->leds[i] = NULL; + led_classdev_unregister(led); + kfree(led); + } + } +} + +static int wiimote_leds_create(struct wiimote_data *wdata) +{ + int i, ret; + struct device *dev = &wdata->hdev->dev; + size_t namesz = strlen(dev_name(dev)) + 9; + struct led_classdev *led; + char *name; + + for (i = 0; i < 4; ++i) { + led = kzalloc(sizeof(struct led_classdev) + namesz, GFP_KERNEL); + if (!led) { + ret = -ENOMEM; + goto err; + } + name = (void*)&led[1]; + snprintf(name, namesz, "%s:blue:p%d", dev_name(dev), i); + led->name = name; + led->brightness = 0; + led->max_brightness = 1; + led->brightness_get = wiimote_leds_get; + led->brightness_set = wiimote_leds_set; + + ret = led_classdev_register(dev, led); + if (ret) { + kfree(led); + goto err; + } + wdata->leds[i] = led; + } + + return 0; + +err: + wiimote_leds_destroy(wdata); + return ret; +} + static struct wiimote_data *wiimote_create(struct hid_device *hdev) { struct wiimote_data *wdata; @@ -341,6 +444,8 @@ static struct wiimote_data *wiimote_create(struct hid_device *hdev) input_set_drvdata(wdata->input, wdata); wdata->input->event = wiimote_input_event; + wdata->input->open = wiimote_input_open; + wdata->input->close = wiimote_input_close; wdata->input->dev.parent = &wdata->hdev->dev; wdata->input->id.bustype = wdata->hdev->bus; wdata->input->id.vendor = wdata->hdev->vendor; @@ -362,6 +467,12 @@ static struct wiimote_data *wiimote_create(struct hid_device *hdev) static void wiimote_destroy(struct wiimote_data *wdata) { + wiimote_leds_destroy(wdata); + + input_unregister_device(wdata->input); + cancel_work_sync(&wdata->worker); + hid_hw_stop(wdata->hdev); + kfree(wdata); } @@ -377,19 +488,6 @@ static int wiimote_hid_probe(struct hid_device *hdev, return -ENOMEM; } - ret = device_create_file(&hdev->dev, &dev_attr_led1); - if (ret) - goto err; - ret = device_create_file(&hdev->dev, &dev_attr_led2); - if (ret) - goto err; - ret = device_create_file(&hdev->dev, &dev_attr_led3); - if (ret) - goto err; - ret = device_create_file(&hdev->dev, &dev_attr_led4); - if (ret) - goto err; - ret = hid_parse(hdev); if (ret) { hid_err(hdev, "HID parse failed\n"); @@ -408,9 +506,10 @@ static int wiimote_hid_probe(struct hid_device *hdev, goto err_stop; } - /* smp_wmb: Write wdata->xy first before wdata->ready is set to 1 */ - smp_wmb(); - atomic_set(&wdata->ready, 1); + ret = wiimote_leds_create(wdata); + if (ret) + goto err_free; + hid_info(hdev, "New device registered\n"); /* by default set led1 after device initialization */ @@ -420,15 +519,15 @@ static int wiimote_hid_probe(struct hid_device *hdev, return 0; +err_free: + wiimote_destroy(wdata); + return ret; + err_stop: hid_hw_stop(hdev); err: input_free_device(wdata->input); - device_remove_file(&hdev->dev, &dev_attr_led1); - device_remove_file(&hdev->dev, &dev_attr_led2); - device_remove_file(&hdev->dev, &dev_attr_led3); - device_remove_file(&hdev->dev, &dev_attr_led4); - wiimote_destroy(wdata); + kfree(wdata); return ret; } @@ -437,16 +536,6 @@ static void wiimote_hid_remove(struct hid_device *hdev) struct wiimote_data *wdata = hid_get_drvdata(hdev); hid_info(hdev, "Device removed\n"); - - device_remove_file(&hdev->dev, &dev_attr_led1); - device_remove_file(&hdev->dev, &dev_attr_led2); - device_remove_file(&hdev->dev, &dev_attr_led3); - device_remove_file(&hdev->dev, &dev_attr_led4); - - hid_hw_stop(hdev); - input_unregister_device(wdata->input); - - cancel_work_sync(&wdata->worker); wiimote_destroy(wdata); } diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index 621959d5cc4..3146fdcda27 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -47,6 +47,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_AFATECH, USB_DEVICE_ID_AFATECH_AF9016, HID_QUIRK_FULLSPEED_INTERVAL }, { USB_VENDOR_ID_ETURBOTOUCH, USB_DEVICE_ID_ETURBOTOUCH, HID_QUIRK_MULTI_INPUT }, + { USB_VENDOR_ID_GREENASIA, USB_DEVICE_ID_GREENASIA_DUAL_USB_JOYPAD, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_PANTHERLORD, USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK, HID_QUIRK_MULTI_INPUT | HID_QUIRK_SKIP_OUTPUT_REPORTS }, { USB_VENDOR_ID_PLAYDOTCOM, USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_TOUCHPACK, USB_DEVICE_ID_TOUCHPACK_RTS, HID_QUIRK_MULTI_INPUT }, @@ -89,6 +90,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_MULTI_TOUCH, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS, HID_QUIRK_MULTI_INPUT }, + { USB_VENDOR_ID_SIGMA_MICRO, USB_DEVICE_ID_SIGMA_MICRO_KEYBOARD, HID_QUIRK_NO_INIT_REPORTS }, { 0, 0 } }; diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index 59d83e83da7..44b23917d4c 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -36,17 +36,25 @@ #include <linux/cpu.h> #include <linux/pci.h> #include <linux/smp.h> +#include <linux/moduleparam.h> #include <asm/msr.h> #include <asm/processor.h> #define DRVNAME "coretemp" +/* + * force_tjmax only matters when TjMax can't be read from the CPU itself. + * When set, it replaces the driver's suboptimal heuristic. + */ +static int force_tjmax; +module_param_named(tjmax, force_tjmax, int, 0444); +MODULE_PARM_DESC(tjmax, "TjMax value in degrees Celsius"); + #define BASE_SYSFS_ATTR_NO 2 /* Sysfs Base attr no for coretemp */ #define NUM_REAL_CORES 16 /* Number of Real cores per cpu */ #define CORETEMP_NAME_LENGTH 17 /* String Length of attrs */ #define MAX_CORE_ATTRS 4 /* Maximum no of basic attrs */ -#define MAX_THRESH_ATTRS 3 /* Maximum no of Threshold attrs */ -#define TOTAL_ATTRS (MAX_CORE_ATTRS + MAX_THRESH_ATTRS) +#define TOTAL_ATTRS (MAX_CORE_ATTRS + 1) #define MAX_CORE_DATA (NUM_REAL_CORES + BASE_SYSFS_ATTR_NO) #ifdef CONFIG_SMP @@ -69,8 +77,6 @@ * This value is passed as "id" field to rdmsr/wrmsr functions. * @status_reg: One of IA32_THERM_STATUS or IA32_PACKAGE_THERM_STATUS, * from where the temperature values should be read. - * @intrpt_reg: One of IA32_THERM_INTERRUPT or IA32_PACKAGE_THERM_INTERRUPT, - * from where the thresholds are read. * @attr_size: Total number of pre-core attrs displayed in the sysfs. * @is_pkg_data: If this is 1, the temp_data holds pkgtemp data. * Otherwise, temp_data holds coretemp data. @@ -79,13 +85,11 @@ struct temp_data { int temp; int ttarget; - int tmin; int tjmax; unsigned long last_updated; unsigned int cpu; u32 cpu_core_id; u32 status_reg; - u32 intrpt_reg; int attr_size; bool is_pkg_data; bool valid; @@ -143,19 +147,6 @@ static ssize_t show_crit_alarm(struct device *dev, return sprintf(buf, "%d\n", (eax >> 5) & 1); } -static ssize_t show_max_alarm(struct device *dev, - struct device_attribute *devattr, char *buf) -{ - u32 eax, edx; - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct platform_data *pdata = dev_get_drvdata(dev); - struct temp_data *tdata = pdata->core_data[attr->index]; - - rdmsr_on_cpu(tdata->cpu, tdata->status_reg, &eax, &edx); - - return sprintf(buf, "%d\n", !!(eax & THERM_STATUS_THRESHOLD1)); -} - static ssize_t show_tjmax(struct device *dev, struct device_attribute *devattr, char *buf) { @@ -174,83 +165,6 @@ static ssize_t show_ttarget(struct device *dev, return sprintf(buf, "%d\n", pdata->core_data[attr->index]->ttarget); } -static ssize_t store_ttarget(struct device *dev, - struct device_attribute *devattr, - const char *buf, size_t count) -{ - struct platform_data *pdata = dev_get_drvdata(dev); - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct temp_data *tdata = pdata->core_data[attr->index]; - u32 eax, edx; - unsigned long val; - int diff; - - if (strict_strtoul(buf, 10, &val)) - return -EINVAL; - - /* - * THERM_MASK_THRESHOLD1 is 7 bits wide. Values are entered in terms - * of milli degree celsius. Hence don't accept val > (127 * 1000) - */ - if (val > tdata->tjmax || val > 127000) - return -EINVAL; - - diff = (tdata->tjmax - val) / 1000; - - mutex_lock(&tdata->update_lock); - rdmsr_on_cpu(tdata->cpu, tdata->intrpt_reg, &eax, &edx); - eax = (eax & ~THERM_MASK_THRESHOLD1) | - (diff << THERM_SHIFT_THRESHOLD1); - wrmsr_on_cpu(tdata->cpu, tdata->intrpt_reg, eax, edx); - tdata->ttarget = val; - mutex_unlock(&tdata->update_lock); - - return count; -} - -static ssize_t show_tmin(struct device *dev, - struct device_attribute *devattr, char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct platform_data *pdata = dev_get_drvdata(dev); - - return sprintf(buf, "%d\n", pdata->core_data[attr->index]->tmin); -} - -static ssize_t store_tmin(struct device *dev, - struct device_attribute *devattr, - const char *buf, size_t count) -{ - struct platform_data *pdata = dev_get_drvdata(dev); - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct temp_data *tdata = pdata->core_data[attr->index]; - u32 eax, edx; - unsigned long val; - int diff; - - if (strict_strtoul(buf, 10, &val)) - return -EINVAL; - - /* - * THERM_MASK_THRESHOLD0 is 7 bits wide. Values are entered in terms - * of milli degree celsius. Hence don't accept val > (127 * 1000) - */ - if (val > tdata->tjmax || val > 127000) - return -EINVAL; - - diff = (tdata->tjmax - val) / 1000; - - mutex_lock(&tdata->update_lock); - rdmsr_on_cpu(tdata->cpu, tdata->intrpt_reg, &eax, &edx); - eax = (eax & ~THERM_MASK_THRESHOLD0) | - (diff << THERM_SHIFT_THRESHOLD0); - wrmsr_on_cpu(tdata->cpu, tdata->intrpt_reg, eax, edx); - tdata->tmin = val; - mutex_unlock(&tdata->update_lock); - - return count; -} - static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, char *buf) { @@ -374,7 +288,6 @@ static int adjust_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev) static int get_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev) { - /* The 100C is default for both mobile and non mobile CPUs */ int err; u32 eax, edx; u32 val; @@ -385,7 +298,8 @@ static int get_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev) */ err = rdmsr_safe_on_cpu(id, MSR_IA32_TEMPERATURE_TARGET, &eax, &edx); if (err) { - dev_warn(dev, "Unable to read TjMax from CPU.\n"); + if (c->x86_model > 0xe && c->x86_model != 0x1c) + dev_warn(dev, "Unable to read TjMax from CPU %u\n", id); } else { val = (eax >> 16) & 0xff; /* @@ -393,11 +307,17 @@ static int get_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev) * will be used */ if (val) { - dev_info(dev, "TjMax is %d C.\n", val); + dev_dbg(dev, "TjMax is %d degrees C\n", val); return val * 1000; } } + if (force_tjmax) { + dev_notice(dev, "TjMax forced to %d degrees C by user\n", + force_tjmax); + return force_tjmax * 1000; + } + /* * An assumption is made for early CPUs and unreadable MSR. * NOTE: the calculated value may not be correct. @@ -414,21 +334,6 @@ static void __devinit get_ucode_rev_on_cpu(void *edx) rdmsr(MSR_IA32_UCODE_REV, eax, *(u32 *)edx); } -static int get_pkg_tjmax(unsigned int cpu, struct device *dev) -{ - int err; - u32 eax, edx, val; - - err = rdmsr_safe_on_cpu(cpu, MSR_IA32_TEMPERATURE_TARGET, &eax, &edx); - if (!err) { - val = (eax >> 16) & 0xff; - if (val) - return val * 1000; - } - dev_warn(dev, "Unable to read Pkg-TjMax from CPU:%u\n", cpu); - return 100000; /* Default TjMax: 100 degree celsius */ -} - static int create_name_attr(struct platform_data *pdata, struct device *dev) { sysfs_attr_init(&pdata->name_attr.attr); @@ -442,19 +347,14 @@ static int create_core_attrs(struct temp_data *tdata, struct device *dev, int attr_no) { int err, i; - static ssize_t (*rd_ptr[TOTAL_ATTRS]) (struct device *dev, + static ssize_t (*const rd_ptr[TOTAL_ATTRS]) (struct device *dev, struct device_attribute *devattr, char *buf) = { show_label, show_crit_alarm, show_temp, show_tjmax, - show_max_alarm, show_ttarget, show_tmin }; - static ssize_t (*rw_ptr[TOTAL_ATTRS]) (struct device *dev, - struct device_attribute *devattr, const char *buf, - size_t count) = { NULL, NULL, NULL, NULL, NULL, - store_ttarget, store_tmin }; - static const char *names[TOTAL_ATTRS] = { + show_ttarget }; + static const char *const names[TOTAL_ATTRS] = { "temp%d_label", "temp%d_crit_alarm", "temp%d_input", "temp%d_crit", - "temp%d_max_alarm", "temp%d_max", - "temp%d_max_hyst" }; + "temp%d_max" }; for (i = 0; i < tdata->attr_size; i++) { snprintf(tdata->attr_name[i], CORETEMP_NAME_LENGTH, names[i], @@ -462,10 +362,6 @@ static int create_core_attrs(struct temp_data *tdata, struct device *dev, sysfs_attr_init(&tdata->sd_attrs[i].dev_attr.attr); tdata->sd_attrs[i].dev_attr.attr.name = tdata->attr_name[i]; tdata->sd_attrs[i].dev_attr.attr.mode = S_IRUGO; - if (rw_ptr[i]) { - tdata->sd_attrs[i].dev_attr.attr.mode |= S_IWUSR; - tdata->sd_attrs[i].dev_attr.store = rw_ptr[i]; - } tdata->sd_attrs[i].dev_attr.show = rd_ptr[i]; tdata->sd_attrs[i].index = attr_no; err = device_create_file(dev, &tdata->sd_attrs[i].dev_attr); @@ -538,8 +434,6 @@ static struct temp_data *init_temp_data(unsigned int cpu, int pkg_flag) tdata->status_reg = pkg_flag ? MSR_IA32_PACKAGE_THERM_STATUS : MSR_IA32_THERM_STATUS; - tdata->intrpt_reg = pkg_flag ? MSR_IA32_PACKAGE_THERM_INTERRUPT : - MSR_IA32_THERM_INTERRUPT; tdata->is_pkg_data = pkg_flag; tdata->cpu = cpu; tdata->cpu_core_id = TO_CORE_ID(cpu); @@ -548,11 +442,11 @@ static struct temp_data *init_temp_data(unsigned int cpu, int pkg_flag) return tdata; } -static int create_core_data(struct platform_data *pdata, - struct platform_device *pdev, +static int create_core_data(struct platform_device *pdev, unsigned int cpu, int pkg_flag) { struct temp_data *tdata; + struct platform_data *pdata = platform_get_drvdata(pdev); struct cpuinfo_x86 *c = &cpu_data(cpu); u32 eax, edx; int err, attr_no; @@ -588,20 +482,21 @@ static int create_core_data(struct platform_data *pdata, goto exit_free; /* We can access status register. Get Critical Temperature */ - if (pkg_flag) - tdata->tjmax = get_pkg_tjmax(pdev->id, &pdev->dev); - else - tdata->tjmax = get_tjmax(c, cpu, &pdev->dev); + tdata->tjmax = get_tjmax(c, cpu, &pdev->dev); /* - * Test if we can access the intrpt register. If so, increase the - * 'size' enough to have ttarget/tmin/max_alarm interfaces. - * Initialize ttarget with bits 16:22 of MSR_IA32_THERM_INTERRUPT + * Read the still undocumented bits 8:15 of IA32_TEMPERATURE_TARGET. + * The target temperature is available on older CPUs but not in this + * register. Atoms don't have the register at all. */ - err = rdmsr_safe_on_cpu(cpu, tdata->intrpt_reg, &eax, &edx); - if (!err) { - tdata->attr_size += MAX_THRESH_ATTRS; - tdata->ttarget = tdata->tjmax - ((eax >> 16) & 0x7f) * 1000; + if (c->x86_model > 0xe && c->x86_model != 0x1c) { + err = rdmsr_safe_on_cpu(cpu, MSR_IA32_TEMPERATURE_TARGET, + &eax, &edx); + if (!err) { + tdata->ttarget + = tdata->tjmax - ((eax >> 8) & 0xff) * 1000; + tdata->attr_size++; + } } pdata->core_data[attr_no] = tdata; @@ -619,16 +514,13 @@ exit_free: static void coretemp_add_core(unsigned int cpu, int pkg_flag) { - struct platform_data *pdata; struct platform_device *pdev = coretemp_get_pdev(cpu); int err; if (!pdev) return; - pdata = platform_get_drvdata(pdev); - - err = create_core_data(pdata, pdev, cpu, pkg_flag); + err = create_core_data(pdev, cpu, pkg_flag); if (err) dev_err(&pdev->dev, "Adding Core %u failed\n", cpu); } @@ -666,7 +558,7 @@ static int __devinit coretemp_probe(struct platform_device *pdev) if (err) goto exit_free; - pdata->phys_proc_id = TO_PHYS_ID(pdev->id); + pdata->phys_proc_id = pdev->id; platform_set_drvdata(pdev, pdata); pdata->hwmon_dev = hwmon_device_register(&pdev->dev); @@ -718,7 +610,7 @@ static int __cpuinit coretemp_device_add(unsigned int cpu) mutex_lock(&pdev_list_mutex); - pdev = platform_device_alloc(DRVNAME, cpu); + pdev = platform_device_alloc(DRVNAME, TO_PHYS_ID(cpu)); if (!pdev) { err = -ENOMEM; pr_err("Device allocation failed\n"); diff --git a/drivers/hwmon/ds620.c b/drivers/hwmon/ds620.c index 257957c69d9..4f7c3fc40a8 100644 --- a/drivers/hwmon/ds620.c +++ b/drivers/hwmon/ds620.c @@ -72,7 +72,7 @@ struct ds620_data { char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ - u16 temp[3]; /* Register values, word */ + s16 temp[3]; /* Register values, word */ }; /* diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c index c4c40be0edb..d22f241b6a6 100644 --- a/drivers/hwmon/i5k_amb.c +++ b/drivers/hwmon/i5k_amb.c @@ -114,7 +114,6 @@ struct i5k_amb_data { void __iomem *amb_mmio; struct i5k_device_attribute *attrs; unsigned int num_attrs; - unsigned long chipset_id; }; static ssize_t show_name(struct device *dev, struct device_attribute *devattr, @@ -444,8 +443,6 @@ static int __devinit i5k_find_amb_registers(struct i5k_amb_data *data, goto out; } - data->chipset_id = devid; - res = 0; out: pci_dev_put(pcidev); @@ -478,23 +475,13 @@ out: return res; } -static unsigned long i5k_channel_pci_id(struct i5k_amb_data *data, - unsigned long channel) -{ - switch (data->chipset_id) { - case PCI_DEVICE_ID_INTEL_5000_ERR: - return PCI_DEVICE_ID_INTEL_5000_FBD0 + channel; - case PCI_DEVICE_ID_INTEL_5400_ERR: - return PCI_DEVICE_ID_INTEL_5400_FBD0 + channel; - default: - BUG(); - } -} - -static unsigned long chipset_ids[] = { - PCI_DEVICE_ID_INTEL_5000_ERR, - PCI_DEVICE_ID_INTEL_5400_ERR, - 0 +static struct { + unsigned long err; + unsigned long fbd0; +} chipset_ids[] __devinitdata = { + { PCI_DEVICE_ID_INTEL_5000_ERR, PCI_DEVICE_ID_INTEL_5000_FBD0 }, + { PCI_DEVICE_ID_INTEL_5400_ERR, PCI_DEVICE_ID_INTEL_5400_FBD0 }, + { 0, 0 } }; #ifdef MODULE @@ -510,8 +497,7 @@ static int __devinit i5k_amb_probe(struct platform_device *pdev) { struct i5k_amb_data *data; struct resource *reso; - int i; - int res = -ENODEV; + int i, res; data = kzalloc(sizeof(*data), GFP_KERNEL); if (!data) @@ -520,22 +506,22 @@ static int __devinit i5k_amb_probe(struct platform_device *pdev) /* Figure out where the AMB registers live */ i = 0; do { - res = i5k_find_amb_registers(data, chipset_ids[i]); + res = i5k_find_amb_registers(data, chipset_ids[i].err); + if (res == 0) + break; i++; - } while (res && chipset_ids[i]); + } while (chipset_ids[i].err); if (res) goto err; /* Copy the DIMM presence map for the first two channels */ - res = i5k_channel_probe(&data->amb_present[0], - i5k_channel_pci_id(data, 0)); + res = i5k_channel_probe(&data->amb_present[0], chipset_ids[i].fbd0); if (res) goto err; /* Copy the DIMM presence map for the optional second two channels */ - i5k_channel_probe(&data->amb_present[2], - i5k_channel_pci_id(data, 1)); + i5k_channel_probe(&data->amb_present[2], chipset_ids[i].fbd0 + 1); /* Set up resource regions */ reso = request_mem_region(data->amb_base, data->amb_len, DRVNAME); diff --git a/drivers/hwmon/max16065.c b/drivers/hwmon/max16065.c index d94a24fdf4b..dd2d7b9620c 100644 --- a/drivers/hwmon/max16065.c +++ b/drivers/hwmon/max16065.c @@ -124,7 +124,7 @@ static inline int MV_TO_LIMIT(int mv, int range) static inline int ADC_TO_CURR(int adc, int gain) { - return adc * 1400000 / gain * 255; + return adc * 1400000 / (gain * 255); } /* diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c index d7926f4336b..eab11615dce 100644 --- a/drivers/hwmon/ntc_thermistor.c +++ b/drivers/hwmon/ntc_thermistor.c @@ -211,8 +211,7 @@ static int lookup_comp(struct ntc_data *data, if (data->comp[mid].ohm <= ohm) { *i_low = mid; *i_high = mid - 1; - } - if (data->comp[mid].ohm > ohm) { + } else { *i_low = mid + 1; *i_high = mid; } diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c index a561c3a0e91..397fc59b568 100644 --- a/drivers/hwmon/pmbus/pmbus_core.c +++ b/drivers/hwmon/pmbus/pmbus_core.c @@ -978,6 +978,8 @@ static void pmbus_find_max_attr(struct i2c_client *client, struct pmbus_limit_attr { u16 reg; /* Limit register */ bool update; /* True if register needs updates */ + bool low; /* True if low limit; for limits with compare + functions only */ const char *attr; /* Attribute name */ const char *alarm; /* Alarm attribute name */ u32 sbit; /* Alarm attribute status bit */ @@ -1029,7 +1031,8 @@ static bool pmbus_add_limit_attrs(struct i2c_client *client, if (attr->compare) { pmbus_add_boolean_cmp(data, name, l->alarm, index, - cbase, cindex, + l->low ? cindex : cbase, + l->low ? cbase : cindex, attr->sbase + page, l->sbit); } else { pmbus_add_boolean_reg(data, name, @@ -1366,11 +1369,13 @@ static const struct pmbus_sensor_attr power_attributes[] = { static const struct pmbus_limit_attr temp_limit_attrs[] = { { .reg = PMBUS_UT_WARN_LIMIT, + .low = true, .attr = "min", .alarm = "min_alarm", .sbit = PB_TEMP_UT_WARNING, }, { .reg = PMBUS_UT_FAULT_LIMIT, + .low = true, .attr = "lcrit", .alarm = "lcrit_alarm", .sbit = PB_TEMP_UT_FAULT, @@ -1399,11 +1404,13 @@ static const struct pmbus_limit_attr temp_limit_attrs[] = { static const struct pmbus_limit_attr temp_limit_attrs23[] = { { .reg = PMBUS_UT_WARN_LIMIT, + .low = true, .attr = "min", .alarm = "min_alarm", .sbit = PB_TEMP_UT_WARNING, }, { .reg = PMBUS_UT_FAULT_LIMIT, + .low = true, .attr = "lcrit", .alarm = "lcrit_alarm", .sbit = PB_TEMP_UT_FAULT, diff --git a/drivers/hwmon/pmbus/ucd9000.c b/drivers/hwmon/pmbus/ucd9000.c index ace1c731973..d0ddb60155c 100644 --- a/drivers/hwmon/pmbus/ucd9000.c +++ b/drivers/hwmon/pmbus/ucd9000.c @@ -141,13 +141,11 @@ static int ucd9000_probe(struct i2c_client *client, block_buffer[ret] = '\0'; dev_info(&client->dev, "Device ID %s\n", block_buffer); - mid = NULL; - for (i = 0; i < ARRAY_SIZE(ucd9000_id); i++) { - mid = &ucd9000_id[i]; + for (mid = ucd9000_id; mid->name[0]; mid++) { if (!strncasecmp(mid->name, block_buffer, strlen(mid->name))) break; } - if (!mid || !strlen(mid->name)) { + if (!mid->name[0]) { dev_err(&client->dev, "Unsupported device\n"); return -ENODEV; } diff --git a/drivers/hwmon/pmbus/ucd9200.c b/drivers/hwmon/pmbus/ucd9200.c index ffcc1cf3609..c65e9da707c 100644 --- a/drivers/hwmon/pmbus/ucd9200.c +++ b/drivers/hwmon/pmbus/ucd9200.c @@ -68,13 +68,11 @@ static int ucd9200_probe(struct i2c_client *client, block_buffer[ret] = '\0'; dev_info(&client->dev, "Device ID %s\n", block_buffer); - mid = NULL; - for (i = 0; i < ARRAY_SIZE(ucd9200_id); i++) { - mid = &ucd9200_id[i]; + for (mid = ucd9200_id; mid->name[0]; mid++) { if (!strncasecmp(mid->name, block_buffer, strlen(mid->name))) break; } - if (!mid || !strlen(mid->name)) { + if (!mid->name[0]) { dev_err(&client->dev, "Unsupported device\n"); return -ENODEV; } diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c index 17cf1ab9552..8c2844e5691 100644 --- a/drivers/hwmon/w83791d.c +++ b/drivers/hwmon/w83791d.c @@ -329,8 +329,8 @@ static int w83791d_detect(struct i2c_client *client, struct i2c_board_info *info); static int w83791d_remove(struct i2c_client *client); -static int w83791d_read(struct i2c_client *client, u8 register); -static int w83791d_write(struct i2c_client *client, u8 register, u8 value); +static int w83791d_read(struct i2c_client *client, u8 reg); +static int w83791d_write(struct i2c_client *client, u8 reg, u8 value); static struct w83791d_data *w83791d_update_device(struct device *dev); #ifdef DEBUG diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c index 0c731ca69f1..b228e09c5d0 100644 --- a/drivers/i2c/busses/i2c-nomadik.c +++ b/drivers/i2c/busses/i2c-nomadik.c @@ -146,6 +146,7 @@ struct i2c_nmk_client { * @stop: stop condition * @xfer_complete: acknowledge completion for a I2C message * @result: controller propogated result + * @regulator: pointer to i2c regulator * @busy: Busy doing transfer */ struct nmk_i2c_dev { @@ -417,12 +418,12 @@ static int read_i2c(struct nmk_i2c_dev *dev) writel(readl(dev->virtbase + I2C_IMSCR) | irq_mask, dev->virtbase + I2C_IMSCR); - timeout = wait_for_completion_interruptible_timeout( + timeout = wait_for_completion_timeout( &dev->xfer_complete, dev->adap.timeout); if (timeout < 0) { dev_err(&dev->pdev->dev, - "wait_for_completion_interruptible_timeout" + "wait_for_completion_timeout" "returned %d waiting for event\n", timeout); status = timeout; } @@ -504,12 +505,12 @@ static int write_i2c(struct nmk_i2c_dev *dev) writel(readl(dev->virtbase + I2C_IMSCR) | irq_mask, dev->virtbase + I2C_IMSCR); - timeout = wait_for_completion_interruptible_timeout( + timeout = wait_for_completion_timeout( &dev->xfer_complete, dev->adap.timeout); if (timeout < 0) { dev_err(&dev->pdev->dev, - "wait_for_completion_interruptible_timeout" + "wait_for_completion_timeout " "returned %d waiting for event\n", timeout); status = timeout; } diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 1a766cf74f6..2dfb6317685 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1139,41 +1139,12 @@ omap_i2c_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_SUSPEND -static int omap_i2c_suspend(struct device *dev) -{ - if (!pm_runtime_suspended(dev)) - if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_suspend) - dev->bus->pm->runtime_suspend(dev); - - return 0; -} - -static int omap_i2c_resume(struct device *dev) -{ - if (!pm_runtime_suspended(dev)) - if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_resume) - dev->bus->pm->runtime_resume(dev); - - return 0; -} - -static struct dev_pm_ops omap_i2c_pm_ops = { - .suspend = omap_i2c_suspend, - .resume = omap_i2c_resume, -}; -#define OMAP_I2C_PM_OPS (&omap_i2c_pm_ops) -#else -#define OMAP_I2C_PM_OPS NULL -#endif - static struct platform_driver omap_i2c_driver = { .probe = omap_i2c_probe, .remove = omap_i2c_remove, .driver = { .name = "omap_i2c", .owner = THIS_MODULE, - .pm = OMAP_I2C_PM_OPS, }, }; diff --git a/drivers/i2c/busses/i2c-pxa-pci.c b/drivers/i2c/busses/i2c-pxa-pci.c index 6659d269b84..b73da6cd6f9 100644 --- a/drivers/i2c/busses/i2c-pxa-pci.c +++ b/drivers/i2c/busses/i2c-pxa-pci.c @@ -109,12 +109,15 @@ static int __devinit ce4100_i2c_probe(struct pci_dev *dev, return -EINVAL; } sds = kzalloc(sizeof(*sds), GFP_KERNEL); - if (!sds) + if (!sds) { + ret = -ENOMEM; goto err_mem; + } for (i = 0; i < ARRAY_SIZE(sds->pdev); i++) { sds->pdev[i] = add_i2c_device(dev, i); if (IS_ERR(sds->pdev[i])) { + ret = PTR_ERR(sds->pdev[i]); while (--i >= 0) platform_device_unregister(sds->pdev[i]); goto err_dev_add; diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 2440b741197..3c94c4a81a5 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -270,14 +270,30 @@ static int tegra_i2c_fill_tx_fifo(struct tegra_i2c_dev *i2c_dev) /* Rounds down to not include partial word at the end of buf */ words_to_transfer = buf_remaining / BYTES_PER_FIFO_WORD; - if (words_to_transfer > tx_fifo_avail) - words_to_transfer = tx_fifo_avail; - i2c_writesl(i2c_dev, buf, I2C_TX_FIFO, words_to_transfer); - - buf += words_to_transfer * BYTES_PER_FIFO_WORD; - buf_remaining -= words_to_transfer * BYTES_PER_FIFO_WORD; - tx_fifo_avail -= words_to_transfer; + /* It's very common to have < 4 bytes, so optimize that case. */ + if (words_to_transfer) { + if (words_to_transfer > tx_fifo_avail) + words_to_transfer = tx_fifo_avail; + + /* + * Update state before writing to FIFO. If this casues us + * to finish writing all bytes (AKA buf_remaining goes to 0) we + * have a potential for an interrupt (PACKET_XFER_COMPLETE is + * not maskable). We need to make sure that the isr sees + * buf_remaining as 0 and doesn't call us back re-entrantly. + */ + buf_remaining -= words_to_transfer * BYTES_PER_FIFO_WORD; + tx_fifo_avail -= words_to_transfer; + i2c_dev->msg_buf_remaining = buf_remaining; + i2c_dev->msg_buf = buf + + words_to_transfer * BYTES_PER_FIFO_WORD; + barrier(); + + i2c_writesl(i2c_dev, buf, I2C_TX_FIFO, words_to_transfer); + + buf += words_to_transfer * BYTES_PER_FIFO_WORD; + } /* * If there is a partial word at the end of buf, handle it manually to @@ -287,14 +303,15 @@ static int tegra_i2c_fill_tx_fifo(struct tegra_i2c_dev *i2c_dev) if (tx_fifo_avail > 0 && buf_remaining > 0) { BUG_ON(buf_remaining > 3); memcpy(&val, buf, buf_remaining); + + /* Again update before writing to FIFO to make sure isr sees. */ + i2c_dev->msg_buf_remaining = 0; + i2c_dev->msg_buf = NULL; + barrier(); + i2c_writel(i2c_dev, val, I2C_TX_FIFO); - buf_remaining = 0; - tx_fifo_avail--; } - BUG_ON(tx_fifo_avail > 0 && buf_remaining > 0); - i2c_dev->msg_buf_remaining = buf_remaining; - i2c_dev->msg_buf = buf; return 0; } @@ -411,9 +428,10 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id) tegra_i2c_mask_irq(i2c_dev, I2C_INT_TX_FIFO_DATA_REQ); } - if ((status & I2C_INT_PACKET_XFER_COMPLETE) && - !i2c_dev->msg_buf_remaining) + if (status & I2C_INT_PACKET_XFER_COMPLETE) { + BUG_ON(i2c_dev->msg_buf_remaining); complete(&i2c_dev->msg_complete); + } i2c_writel(i2c_dev, status, I2C_INT_STATUS); if (i2c_dev->is_dvc) @@ -531,7 +549,7 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], static u32 tegra_i2c_func(struct i2c_adapter *adap) { - return I2C_FUNC_I2C; + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; } static const struct i2c_algorithm tegra_i2c_algo = { @@ -719,6 +737,17 @@ static int tegra_i2c_resume(struct platform_device *pdev) } #endif +#if defined(CONFIG_OF) +/* Match table for of_platform binding */ +static const struct of_device_id tegra_i2c_of_match[] __devinitconst = { + { .compatible = "nvidia,tegra20-i2c", }, + {}, +}; +MODULE_DEVICE_TABLE(of, tegra_i2c_of_match); +#else +#define tegra_i2c_of_match NULL +#endif + static struct platform_driver tegra_i2c_driver = { .probe = tegra_i2c_probe, .remove = tegra_i2c_remove, @@ -729,6 +758,7 @@ static struct platform_driver tegra_i2c_driver = { .driver = { .name = "tegra-i2c", .owner = THIS_MODULE, + .of_match_table = tegra_i2c_of_match, }, }; diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c index 9882971827e..358cd7ee905 100644 --- a/drivers/input/joystick/analog.c +++ b/drivers/input/joystick/analog.c @@ -139,7 +139,7 @@ struct analog_port { #include <linux/i8253.h> #define GET_TIME(x) do { if (cpu_has_tsc) rdtscl(x); else x = get_time_pit(); } while (0) -#define DELTA(x,y) (cpu_has_tsc ? ((y) - (x)) : ((x) - (y) + ((x) < (y) ? CLOCK_TICK_RATE / HZ : 0))) +#define DELTA(x,y) (cpu_has_tsc ? ((y) - (x)) : ((x) - (y) + ((x) < (y) ? PIT_TICK_RATE / HZ : 0))) #define TIME_NAME (cpu_has_tsc?"TSC":"PIT") static unsigned int get_time_pit(void) { diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c index 7b404e5443e..e34eeb8ae37 100644 --- a/drivers/input/keyboard/adp5588-keys.c +++ b/drivers/input/keyboard/adp5588-keys.c @@ -668,4 +668,3 @@ module_exit(adp5588_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); MODULE_DESCRIPTION("ADP5588/87 Keypad driver"); -MODULE_ALIAS("platform:adp5588-keys"); diff --git a/drivers/input/keyboard/ep93xx_keypad.c b/drivers/input/keyboard/ep93xx_keypad.c index c8242dd190d..aa17e024d80 100644 --- a/drivers/input/keyboard/ep93xx_keypad.c +++ b/drivers/input/keyboard/ep93xx_keypad.c @@ -20,6 +20,7 @@ * flag. */ +#include <linux/module.h> #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/clk.h> diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c index f270447ba95..a5a77915c65 100644 --- a/drivers/input/keyboard/tegra-kbc.c +++ b/drivers/input/keyboard/tegra-kbc.c @@ -702,7 +702,7 @@ err_iounmap: err_free_mem_region: release_mem_region(res->start, resource_size(res)); err_free_mem: - input_free_device(kbc->idev); + input_free_device(input_dev); kfree(kbc); return err; diff --git a/drivers/input/misc/ad714x-i2c.c b/drivers/input/misc/ad714x-i2c.c index e21deb1baa8..025417d74ca 100644 --- a/drivers/input/misc/ad714x-i2c.c +++ b/drivers/input/misc/ad714x-i2c.c @@ -1,7 +1,7 @@ /* * AD714X CapTouch Programmable Controller driver (I2C bus) * - * Copyright 2009 Analog Devices Inc. + * Copyright 2009-2011 Analog Devices Inc. * * Licensed under the GPL-2 or later. */ @@ -27,54 +27,49 @@ static int ad714x_i2c_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(ad714x_i2c_pm, ad714x_i2c_suspend, ad714x_i2c_resume); -static int ad714x_i2c_write(struct device *dev, unsigned short reg, - unsigned short data) +static int ad714x_i2c_write(struct ad714x_chip *chip, + unsigned short reg, unsigned short data) { - struct i2c_client *client = to_i2c_client(dev); - int ret = 0; - u8 *_reg = (u8 *)® - u8 *_data = (u8 *)&data; - - u8 tx[4] = { - _reg[1], - _reg[0], - _data[1], - _data[0] - }; - - ret = i2c_master_send(client, tx, 4); - if (ret < 0) - dev_err(&client->dev, "I2C write error\n"); - - return ret; + struct i2c_client *client = to_i2c_client(chip->dev); + int error; + + chip->xfer_buf[0] = cpu_to_be16(reg); + chip->xfer_buf[1] = cpu_to_be16(data); + + error = i2c_master_send(client, (u8 *)chip->xfer_buf, + 2 * sizeof(*chip->xfer_buf)); + if (unlikely(error < 0)) { + dev_err(&client->dev, "I2C write error: %d\n", error); + return error; + } + + return 0; } -static int ad714x_i2c_read(struct device *dev, unsigned short reg, - unsigned short *data) +static int ad714x_i2c_read(struct ad714x_chip *chip, + unsigned short reg, unsigned short *data, size_t len) { - struct i2c_client *client = to_i2c_client(dev); - int ret = 0; - u8 *_reg = (u8 *)® - u8 *_data = (u8 *)data; - - u8 tx[2] = { - _reg[1], - _reg[0] - }; - u8 rx[2]; - - ret = i2c_master_send(client, tx, 2); - if (ret >= 0) - ret = i2c_master_recv(client, rx, 2); - - if (unlikely(ret < 0)) { - dev_err(&client->dev, "I2C read error\n"); - } else { - _data[0] = rx[1]; - _data[1] = rx[0]; + struct i2c_client *client = to_i2c_client(chip->dev); + int i; + int error; + + chip->xfer_buf[0] = cpu_to_be16(reg); + + error = i2c_master_send(client, (u8 *)chip->xfer_buf, + sizeof(*chip->xfer_buf)); + if (error >= 0) + error = i2c_master_recv(client, (u8 *)chip->xfer_buf, + len * sizeof(*chip->xfer_buf)); + + if (unlikely(error < 0)) { + dev_err(&client->dev, "I2C read error: %d\n", error); + return error; } - return ret; + for (i = 0; i < len; i++) + data[i] = be16_to_cpu(chip->xfer_buf[i]); + + return 0; } static int __devinit ad714x_i2c_probe(struct i2c_client *client, diff --git a/drivers/input/misc/ad714x-spi.c b/drivers/input/misc/ad714x-spi.c index 4120dd54930..875b5081136 100644 --- a/drivers/input/misc/ad714x-spi.c +++ b/drivers/input/misc/ad714x-spi.c @@ -1,12 +1,12 @@ /* * AD714X CapTouch Programmable Controller driver (SPI bus) * - * Copyright 2009 Analog Devices Inc. + * Copyright 2009-2011 Analog Devices Inc. * * Licensed under the GPL-2 or later. */ -#include <linux/input.h> /* BUS_I2C */ +#include <linux/input.h> /* BUS_SPI */ #include <linux/module.h> #include <linux/spi/spi.h> #include <linux/pm.h> @@ -30,30 +30,68 @@ static int ad714x_spi_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(ad714x_spi_pm, ad714x_spi_suspend, ad714x_spi_resume); -static int ad714x_spi_read(struct device *dev, unsigned short reg, - unsigned short *data) +static int ad714x_spi_read(struct ad714x_chip *chip, + unsigned short reg, unsigned short *data, size_t len) { - struct spi_device *spi = to_spi_device(dev); - unsigned short tx = AD714x_SPI_CMD_PREFIX | AD714x_SPI_READ | reg; + struct spi_device *spi = to_spi_device(chip->dev); + struct spi_message message; + struct spi_transfer xfer[2]; + int i; + int error; + + spi_message_init(&message); + memset(xfer, 0, sizeof(xfer)); + + chip->xfer_buf[0] = cpu_to_be16(AD714x_SPI_CMD_PREFIX | + AD714x_SPI_READ | reg); + xfer[0].tx_buf = &chip->xfer_buf[0]; + xfer[0].len = sizeof(chip->xfer_buf[0]); + spi_message_add_tail(&xfer[0], &message); + + xfer[1].rx_buf = &chip->xfer_buf[1]; + xfer[1].len = sizeof(chip->xfer_buf[1]) * len; + spi_message_add_tail(&xfer[1], &message); + + error = spi_sync(spi, &message); + if (unlikely(error)) { + dev_err(chip->dev, "SPI read error: %d\n", error); + return error; + } + + for (i = 0; i < len; i++) + data[i] = be16_to_cpu(chip->xfer_buf[i + 1]); - return spi_write_then_read(spi, (u8 *)&tx, 2, (u8 *)data, 2); + return 0; } -static int ad714x_spi_write(struct device *dev, unsigned short reg, - unsigned short data) +static int ad714x_spi_write(struct ad714x_chip *chip, + unsigned short reg, unsigned short data) { - struct spi_device *spi = to_spi_device(dev); - unsigned short tx[2] = { - AD714x_SPI_CMD_PREFIX | reg, - data - }; + struct spi_device *spi = to_spi_device(chip->dev); + int error; + + chip->xfer_buf[0] = cpu_to_be16(AD714x_SPI_CMD_PREFIX | reg); + chip->xfer_buf[1] = cpu_to_be16(data); + + error = spi_write(spi, (u8 *)chip->xfer_buf, + 2 * sizeof(*chip->xfer_buf)); + if (unlikely(error)) { + dev_err(chip->dev, "SPI write error: %d\n", error); + return error; + } - return spi_write(spi, (u8 *)tx, 4); + return 0; } static int __devinit ad714x_spi_probe(struct spi_device *spi) { struct ad714x_chip *chip; + int err; + + spi->bits_per_word = 8; + err = spi_setup(spi); + if (err < 0) + return err; chip = ad714x_probe(&spi->dev, BUS_SPI, spi->irq, ad714x_spi_read, ad714x_spi_write); diff --git a/drivers/input/misc/ad714x.c b/drivers/input/misc/ad714x.c index c3a62c42cd2..ca42c7d2a3c 100644 --- a/drivers/input/misc/ad714x.c +++ b/drivers/input/misc/ad714x.c @@ -1,7 +1,7 @@ /* * AD714X CapTouch Programmable Controller driver supporting AD7142/3/7/8/7A * - * Copyright 2009 Analog Devices Inc. + * Copyright 2009-2011 Analog Devices Inc. * * Licensed under the GPL-2 or later. */ @@ -59,7 +59,6 @@ #define STAGE11_AMBIENT 0x27D #define PER_STAGE_REG_NUM 36 -#define STAGE_NUM 12 #define STAGE_CFGREG_NUM 8 #define SYS_CFGREG_NUM 8 @@ -124,27 +123,6 @@ struct ad714x_driver_data { * information to integrate all things which will be private data * of spi/i2c device */ -struct ad714x_chip { - unsigned short h_state; - unsigned short l_state; - unsigned short c_state; - unsigned short adc_reg[STAGE_NUM]; - unsigned short amb_reg[STAGE_NUM]; - unsigned short sensor_val[STAGE_NUM]; - - struct ad714x_platform_data *hw; - struct ad714x_driver_data *sw; - - int irq; - struct device *dev; - ad714x_read_t read; - ad714x_write_t write; - - struct mutex mutex; - - unsigned product; - unsigned version; -}; static void ad714x_use_com_int(struct ad714x_chip *ad714x, int start_stage, int end_stage) @@ -154,13 +132,13 @@ static void ad714x_use_com_int(struct ad714x_chip *ad714x, mask = ((1 << (end_stage + 1)) - 1) - ((1 << start_stage) - 1); - ad714x->read(ad714x->dev, STG_COM_INT_EN_REG, &data); + ad714x->read(ad714x, STG_COM_INT_EN_REG, &data, 1); data |= 1 << end_stage; - ad714x->write(ad714x->dev, STG_COM_INT_EN_REG, data); + ad714x->write(ad714x, STG_COM_INT_EN_REG, data); - ad714x->read(ad714x->dev, STG_HIGH_INT_EN_REG, &data); + ad714x->read(ad714x, STG_HIGH_INT_EN_REG, &data, 1); data &= ~mask; - ad714x->write(ad714x->dev, STG_HIGH_INT_EN_REG, data); + ad714x->write(ad714x, STG_HIGH_INT_EN_REG, data); } static void ad714x_use_thr_int(struct ad714x_chip *ad714x, @@ -171,13 +149,13 @@ static void ad714x_use_thr_int(struct ad714x_chip *ad714x, mask = ((1 << (end_stage + 1)) - 1) - ((1 << start_stage) - 1); - ad714x->read(ad714x->dev, STG_COM_INT_EN_REG, &data); + ad714x->read(ad714x, STG_COM_INT_EN_REG, &data, 1); data &= ~(1 << end_stage); - ad714x->write(ad714x->dev, STG_COM_INT_EN_REG, data); + ad714x->write(ad714x, STG_COM_INT_EN_REG, data); - ad714x->read(ad714x->dev, STG_HIGH_INT_EN_REG, &data); + ad714x->read(ad714x, STG_HIGH_INT_EN_REG, &data, 1); data |= mask; - ad714x->write(ad714x->dev, STG_HIGH_INT_EN_REG, data); + ad714x->write(ad714x, STG_HIGH_INT_EN_REG, data); } static int ad714x_cal_highest_stage(struct ad714x_chip *ad714x, @@ -273,15 +251,16 @@ static void ad714x_slider_cal_sensor_val(struct ad714x_chip *ad714x, int idx) struct ad714x_slider_plat *hw = &ad714x->hw->slider[idx]; int i; + ad714x->read(ad714x, CDC_RESULT_S0 + hw->start_stage, + &ad714x->adc_reg[hw->start_stage], + hw->end_stage - hw->start_stage + 1); + for (i = hw->start_stage; i <= hw->end_stage; i++) { - ad714x->read(ad714x->dev, CDC_RESULT_S0 + i, - &ad714x->adc_reg[i]); - ad714x->read(ad714x->dev, - STAGE0_AMBIENT + i * PER_STAGE_REG_NUM, - &ad714x->amb_reg[i]); - - ad714x->sensor_val[i] = abs(ad714x->adc_reg[i] - - ad714x->amb_reg[i]); + ad714x->read(ad714x, STAGE0_AMBIENT + i * PER_STAGE_REG_NUM, + &ad714x->amb_reg[i], 1); + + ad714x->sensor_val[i] = + abs(ad714x->adc_reg[i] - ad714x->amb_reg[i]); } } @@ -444,15 +423,16 @@ static void ad714x_wheel_cal_sensor_val(struct ad714x_chip *ad714x, int idx) struct ad714x_wheel_plat *hw = &ad714x->hw->wheel[idx]; int i; + ad714x->read(ad714x, CDC_RESULT_S0 + hw->start_stage, + &ad714x->adc_reg[hw->start_stage], + hw->end_stage - hw->start_stage + 1); + for (i = hw->start_stage; i <= hw->end_stage; i++) { - ad714x->read(ad714x->dev, CDC_RESULT_S0 + i, - &ad714x->adc_reg[i]); - ad714x->read(ad714x->dev, - STAGE0_AMBIENT + i * PER_STAGE_REG_NUM, - &ad714x->amb_reg[i]); + ad714x->read(ad714x, STAGE0_AMBIENT + i * PER_STAGE_REG_NUM, + &ad714x->amb_reg[i], 1); if (ad714x->adc_reg[i] > ad714x->amb_reg[i]) - ad714x->sensor_val[i] = ad714x->adc_reg[i] - - ad714x->amb_reg[i]; + ad714x->sensor_val[i] = + ad714x->adc_reg[i] - ad714x->amb_reg[i]; else ad714x->sensor_val[i] = 0; } @@ -597,15 +577,16 @@ static void touchpad_cal_sensor_val(struct ad714x_chip *ad714x, int idx) struct ad714x_touchpad_plat *hw = &ad714x->hw->touchpad[idx]; int i; + ad714x->read(ad714x, CDC_RESULT_S0 + hw->x_start_stage, + &ad714x->adc_reg[hw->x_start_stage], + hw->x_end_stage - hw->x_start_stage + 1); + for (i = hw->x_start_stage; i <= hw->x_end_stage; i++) { - ad714x->read(ad714x->dev, CDC_RESULT_S0 + i, - &ad714x->adc_reg[i]); - ad714x->read(ad714x->dev, - STAGE0_AMBIENT + i * PER_STAGE_REG_NUM, - &ad714x->amb_reg[i]); + ad714x->read(ad714x, STAGE0_AMBIENT + i * PER_STAGE_REG_NUM, + &ad714x->amb_reg[i], 1); if (ad714x->adc_reg[i] > ad714x->amb_reg[i]) - ad714x->sensor_val[i] = ad714x->adc_reg[i] - - ad714x->amb_reg[i]; + ad714x->sensor_val[i] = + ad714x->adc_reg[i] - ad714x->amb_reg[i]; else ad714x->sensor_val[i] = 0; } @@ -891,7 +872,7 @@ static int ad714x_hw_detect(struct ad714x_chip *ad714x) { unsigned short data; - ad714x->read(ad714x->dev, AD714X_PARTID_REG, &data); + ad714x->read(ad714x, AD714X_PARTID_REG, &data, 1); switch (data & 0xFFF0) { case AD7142_PARTID: ad714x->product = 0x7142; @@ -940,23 +921,20 @@ static void ad714x_hw_init(struct ad714x_chip *ad714x) for (i = 0; i < STAGE_NUM; i++) { reg_base = AD714X_STAGECFG_REG + i * STAGE_CFGREG_NUM; for (j = 0; j < STAGE_CFGREG_NUM; j++) - ad714x->write(ad714x->dev, reg_base + j, + ad714x->write(ad714x, reg_base + j, ad714x->hw->stage_cfg_reg[i][j]); } for (i = 0; i < SYS_CFGREG_NUM; i++) - ad714x->write(ad714x->dev, AD714X_SYSCFG_REG + i, + ad714x->write(ad714x, AD714X_SYSCFG_REG + i, ad714x->hw->sys_cfg_reg[i]); for (i = 0; i < SYS_CFGREG_NUM; i++) - ad714x->read(ad714x->dev, AD714X_SYSCFG_REG + i, - &data); + ad714x->read(ad714x, AD714X_SYSCFG_REG + i, &data, 1); - ad714x->write(ad714x->dev, AD714X_STG_CAL_EN_REG, 0xFFF); + ad714x->write(ad714x, AD714X_STG_CAL_EN_REG, 0xFFF); /* clear all interrupts */ - ad714x->read(ad714x->dev, STG_LOW_INT_STA_REG, &data); - ad714x->read(ad714x->dev, STG_HIGH_INT_STA_REG, &data); - ad714x->read(ad714x->dev, STG_COM_INT_STA_REG, &data); + ad714x->read(ad714x, STG_LOW_INT_STA_REG, &ad714x->l_state, 3); } static irqreturn_t ad714x_interrupt_thread(int irq, void *data) @@ -966,9 +944,7 @@ static irqreturn_t ad714x_interrupt_thread(int irq, void *data) mutex_lock(&ad714x->mutex); - ad714x->read(ad714x->dev, STG_LOW_INT_STA_REG, &ad714x->l_state); - ad714x->read(ad714x->dev, STG_HIGH_INT_STA_REG, &ad714x->h_state); - ad714x->read(ad714x->dev, STG_COM_INT_STA_REG, &ad714x->c_state); + ad714x->read(ad714x, STG_LOW_INT_STA_REG, &ad714x->l_state, 3); for (i = 0; i < ad714x->hw->button_num; i++) ad714x_button_state_machine(ad714x, i); @@ -1245,7 +1221,7 @@ int ad714x_disable(struct ad714x_chip *ad714x) mutex_lock(&ad714x->mutex); data = ad714x->hw->sys_cfg_reg[AD714X_PWR_CTRL] | 0x3; - ad714x->write(ad714x->dev, AD714X_PWR_CTRL, data); + ad714x->write(ad714x, AD714X_PWR_CTRL, data); mutex_unlock(&ad714x->mutex); @@ -1255,24 +1231,20 @@ EXPORT_SYMBOL(ad714x_disable); int ad714x_enable(struct ad714x_chip *ad714x) { - unsigned short data; - dev_dbg(ad714x->dev, "%s enter\n", __func__); mutex_lock(&ad714x->mutex); /* resume to non-shutdown mode */ - ad714x->write(ad714x->dev, AD714X_PWR_CTRL, + ad714x->write(ad714x, AD714X_PWR_CTRL, ad714x->hw->sys_cfg_reg[AD714X_PWR_CTRL]); /* make sure the interrupt output line is not low level after resume, * otherwise we will get no chance to enter falling-edge irq again */ - ad714x->read(ad714x->dev, STG_LOW_INT_STA_REG, &data); - ad714x->read(ad714x->dev, STG_HIGH_INT_STA_REG, &data); - ad714x->read(ad714x->dev, STG_COM_INT_STA_REG, &data); + ad714x->read(ad714x, STG_LOW_INT_STA_REG, &ad714x->l_state, 3); mutex_unlock(&ad714x->mutex); diff --git a/drivers/input/misc/ad714x.h b/drivers/input/misc/ad714x.h index 45c54fb13f0..3c85455aa66 100644 --- a/drivers/input/misc/ad714x.h +++ b/drivers/input/misc/ad714x.h @@ -1,7 +1,7 @@ /* * AD714X CapTouch Programmable Controller driver (bus interfaces) * - * Copyright 2009 Analog Devices Inc. + * Copyright 2009-2011 Analog Devices Inc. * * Licensed under the GPL-2 or later. */ @@ -11,11 +11,40 @@ #include <linux/types.h> +#define STAGE_NUM 12 + struct device; +struct ad714x_platform_data; +struct ad714x_driver_data; struct ad714x_chip; -typedef int (*ad714x_read_t)(struct device *, unsigned short, unsigned short *); -typedef int (*ad714x_write_t)(struct device *, unsigned short, unsigned short); +typedef int (*ad714x_read_t)(struct ad714x_chip *, unsigned short, unsigned short *, size_t); +typedef int (*ad714x_write_t)(struct ad714x_chip *, unsigned short, unsigned short); + +struct ad714x_chip { + unsigned short l_state; + unsigned short h_state; + unsigned short c_state; + unsigned short adc_reg[STAGE_NUM]; + unsigned short amb_reg[STAGE_NUM]; + unsigned short sensor_val[STAGE_NUM]; + + struct ad714x_platform_data *hw; + struct ad714x_driver_data *sw; + + int irq; + struct device *dev; + ad714x_read_t read; + ad714x_write_t write; + + struct mutex mutex; + + unsigned product; + unsigned version; + + __be16 xfer_buf[16] ____cacheline_aligned; + +}; int ad714x_disable(struct ad714x_chip *ad714x); int ad714x_enable(struct ad714x_chip *ad714x); diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c index b09c7d12721..ab860511f01 100644 --- a/drivers/input/misc/cm109.c +++ b/drivers/input/misc/cm109.c @@ -475,7 +475,7 @@ static void cm109_toggle_buzzer_sync(struct cm109_dev *dev, int on) le16_to_cpu(dev->ctl_req->wIndex), dev->ctl_data, USB_PKT_LEN, USB_CTRL_SET_TIMEOUT); - if (error && error != EINTR) + if (error < 0 && error != -EINTR) err("%s: usb_control_msg() failed %d", __func__, error); } diff --git a/drivers/input/misc/mma8450.c b/drivers/input/misc/mma8450.c index 6c76cf79299..0794778295f 100644 --- a/drivers/input/misc/mma8450.c +++ b/drivers/input/misc/mma8450.c @@ -234,7 +234,7 @@ static const struct of_device_id mma8450_dt_ids[] = { { .compatible = "fsl,mma8450", }, { /* sentinel */ } }; -MODULE_DEVICE_TABLE(i2c, mma8450_dt_ids); +MODULE_DEVICE_TABLE(of, mma8450_dt_ids); static struct i2c_driver mma8450_driver = { .driver = { diff --git a/drivers/input/misc/mpu3050.c b/drivers/input/misc/mpu3050.c index b95fac15b2e..f71dc728da5 100644 --- a/drivers/input/misc/mpu3050.c +++ b/drivers/input/misc/mpu3050.c @@ -282,7 +282,7 @@ err_free_irq: err_pm_set_suspended: pm_runtime_set_suspended(&client->dev); err_free_mem: - input_unregister_device(idev); + input_free_device(idev); kfree(sensor); return error; } diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c index 3126983c004..5ec617e28f7 100644 --- a/drivers/input/mouse/bcm5974.c +++ b/drivers/input/mouse/bcm5974.c @@ -67,6 +67,18 @@ #define USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI 0x0245 #define USB_DEVICE_ID_APPLE_WELLSPRING5_ISO 0x0246 #define USB_DEVICE_ID_APPLE_WELLSPRING5_JIS 0x0247 +/* MacbookAir4,1 (unibody, July 2011) */ +#define USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI 0x0249 +#define USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO 0x024a +#define USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS 0x024b +/* MacbookAir4,2 (unibody, July 2011) */ +#define USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI 0x024c +#define USB_DEVICE_ID_APPLE_WELLSPRING6_ISO 0x024d +#define USB_DEVICE_ID_APPLE_WELLSPRING6_JIS 0x024e +/* Macbook8,2 (unibody) */ +#define USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI 0x0252 +#define USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO 0x0253 +#define USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS 0x0254 #define BCM5974_DEVICE(prod) { \ .match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \ @@ -104,6 +116,18 @@ static const struct usb_device_id bcm5974_table[] = { BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI), BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5_ISO), BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5_JIS), + /* MacbookAir4,1 */ + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS), + /* MacbookAir4,2 */ + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6_ISO), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6_JIS), + /* MacbookPro8,2 */ + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS), /* Terminating entry */ {} }; @@ -294,6 +318,42 @@ static const struct bcm5974_config bcm5974_config_table[] = { { DIM_X, DIM_X / SN_COORD, -4415, 5050 }, { DIM_Y, DIM_Y / SN_COORD, -55, 6680 } }, + { + USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI, + USB_DEVICE_ID_APPLE_WELLSPRING6_ISO, + USB_DEVICE_ID_APPLE_WELLSPRING6_JIS, + HAS_INTEGRATED_BUTTON, + 0x84, sizeof(struct bt_data), + 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS, + { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 }, + { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, + { DIM_X, DIM_X / SN_COORD, -4620, 5140 }, + { DIM_Y, DIM_Y / SN_COORD, -150, 6600 } + }, + { + USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI, + USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO, + USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS, + HAS_INTEGRATED_BUTTON, + 0x84, sizeof(struct bt_data), + 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS, + { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 }, + { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, + { DIM_X, DIM_X / SN_COORD, -4750, 5280 }, + { DIM_Y, DIM_Y / SN_COORD, -150, 6730 } + }, + { + USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI, + USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO, + USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS, + HAS_INTEGRATED_BUTTON, + 0x84, sizeof(struct bt_data), + 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS, + { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 }, + { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, + { DIM_X, DIM_X / SN_COORD, -4620, 5140 }, + { DIM_Y, DIM_Y / SN_COORD, -150, 6600 } + }, {} }; diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 449c0a46dba..958b4eb6369 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -49,6 +49,7 @@ struct hid_descriptor { #define USB_REQ_GET_REPORT 0x01 #define USB_REQ_SET_REPORT 0x09 #define WAC_HID_FEATURE_REPORT 0x03 +#define WAC_MSG_RETRIES 5 static int usb_get_report(struct usb_interface *intf, unsigned char type, unsigned char id, void *buf, int size) @@ -165,7 +166,7 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi report, hid_desc->wDescriptorLength, 5000); /* 5 secs */ - } while (result < 0 && limit++ < 5); + } while (result < 0 && limit++ < WAC_MSG_RETRIES); /* No need to parse the Descriptor. It isn't an error though */ if (result < 0) @@ -228,13 +229,6 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi get_unaligned_le16(&report[i + 3]); i += 4; } - } else if (usage == WCM_DIGITIZER) { - /* max pressure isn't reported - features->pressure_max = (unsigned short) - (report[i+4] << 8 | report[i + 3]); - */ - features->pressure_max = 255; - i += 4; } break; @@ -290,13 +284,6 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi pen = 1; i++; break; - - case HID_USAGE_UNDEFINED: - if (usage == WCM_DESKTOP && finger) /* capacity */ - features->pressure_max = - get_unaligned_le16(&report[i + 3]); - i += 4; - break; } break; @@ -319,24 +306,26 @@ static int wacom_query_tablet_data(struct usb_interface *intf, struct wacom_feat int limit = 0, report_id = 2; int error = -ENOMEM; - rep_data = kmalloc(2, GFP_KERNEL); + rep_data = kmalloc(4, GFP_KERNEL); if (!rep_data) return error; - /* ask to report tablet data if it is 2FGT Tablet PC or + /* ask to report tablet data if it is MT Tablet PC or * not a Tablet PC */ if (features->type == TABLETPC2FG) { do { rep_data[0] = 3; rep_data[1] = 4; + rep_data[2] = 0; + rep_data[3] = 0; report_id = 3; error = usb_set_report(intf, WAC_HID_FEATURE_REPORT, - report_id, rep_data, 2); + report_id, rep_data, 4); if (error >= 0) error = usb_get_report(intf, WAC_HID_FEATURE_REPORT, report_id, - rep_data, 3); - } while ((error < 0 || rep_data[1] != 4) && limit++ < 5); + rep_data, 4); + } while ((error < 0 || rep_data[1] != 4) && limit++ < WAC_MSG_RETRIES); } else if (features->type != TABLETPC) { do { rep_data[0] = 2; @@ -347,7 +336,7 @@ static int wacom_query_tablet_data(struct usb_interface *intf, struct wacom_feat error = usb_get_report(intf, WAC_HID_FEATURE_REPORT, report_id, rep_data, 2); - } while ((error < 0 || rep_data[1] != 2) && limit++ < 5); + } while ((error < 0 || rep_data[1] != 2) && limit++ < WAC_MSG_RETRIES); } kfree(rep_data); diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 03ebcc8b24b..0dc97ec15c2 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -800,25 +800,26 @@ static int wacom_bpt_touch(struct wacom_wac *wacom) int i; for (i = 0; i < 2; i++) { - int p = data[9 * i + 2]; - bool touch = p && !wacom->shared->stylus_in_proximity; + int offset = (data[1] & 0x80) ? (8 * i) : (9 * i); + bool touch = data[offset + 3] & 0x80; - input_mt_slot(input, i); - input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); /* * Touch events need to be disabled while stylus is * in proximity because user's hand is resting on touchpad * and sending unwanted events. User expects tablet buttons * to continue working though. */ + touch = touch && !wacom->shared->stylus_in_proximity; + + input_mt_slot(input, i); + input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); if (touch) { - int x = get_unaligned_be16(&data[9 * i + 3]) & 0x7ff; - int y = get_unaligned_be16(&data[9 * i + 5]) & 0x7ff; + int x = get_unaligned_be16(&data[offset + 3]) & 0x7ff; + int y = get_unaligned_be16(&data[offset + 5]) & 0x7ff; if (features->quirks & WACOM_QUIRK_BBTOUCH_LOWRES) { x <<= 5; y <<= 5; } - input_report_abs(input, ABS_MT_PRESSURE, p); input_report_abs(input, ABS_MT_POSITION_X, x); input_report_abs(input, ABS_MT_POSITION_Y, y); } @@ -1056,10 +1057,11 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, features->x_fuzz, 0); input_set_abs_params(input_dev, ABS_Y, 0, features->y_max, features->y_fuzz, 0); - input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max, - features->pressure_fuzz, 0); if (features->device_type == BTN_TOOL_PEN) { + input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max, + features->pressure_fuzz, 0); + /* penabled devices have fixed resolution for each model */ input_abs_set_res(input_dev, ABS_X, features->x_resolution); input_abs_set_res(input_dev, ABS_Y, features->y_resolution); @@ -1098,6 +1100,8 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, __set_bit(BTN_TOOL_MOUSE, input_dev->keybit); __set_bit(BTN_STYLUS, input_dev->keybit); __set_bit(BTN_STYLUS2, input_dev->keybit); + + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); break; case WACOM_21UX2: @@ -1126,6 +1130,9 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, } input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); + + __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); + wacom_setup_cintiq(wacom_wac); break; @@ -1150,6 +1157,8 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, /* fall through */ case INTUOS: + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); + wacom_setup_intuos(wacom_wac); break; @@ -1165,6 +1174,8 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); wacom_setup_intuos(wacom_wac); + + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); break; case TABLETPC2FG: @@ -1183,26 +1194,40 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, case TABLETPC: __clear_bit(ABS_MISC, input_dev->absbit); + __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); + if (features->device_type != BTN_TOOL_PEN) break; /* no need to process stylus stuff */ /* fall through */ case PL: - case PTU: case DTU: __set_bit(BTN_TOOL_PEN, input_dev->keybit); + __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); __set_bit(BTN_STYLUS, input_dev->keybit); __set_bit(BTN_STYLUS2, input_dev->keybit); + + __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); + break; + + case PTU: + __set_bit(BTN_STYLUS2, input_dev->keybit); /* fall through */ case PENPARTNER: + __set_bit(BTN_TOOL_PEN, input_dev->keybit); __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); + __set_bit(BTN_STYLUS, input_dev->keybit); + + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); break; case BAMBOO_PT: __clear_bit(ABS_MISC, input_dev->absbit); + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); + if (features->device_type == BTN_TOOL_DOUBLETAP) { __set_bit(BTN_LEFT, input_dev->keybit); __set_bit(BTN_FORWARD, input_dev->keybit); @@ -1460,6 +1485,9 @@ static const struct wacom_features wacom_features_0xD3 = static const struct wacom_features wacom_features_0xD4 = { "Wacom Bamboo Pen", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0xD5 = + { "Wacom Bamboo Pen 6x8", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, + 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xD6 = { "Wacom BambooPT 2FG 4x5", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; @@ -1564,6 +1592,7 @@ const struct usb_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0xD2) }, { USB_DEVICE_WACOM(0xD3) }, { USB_DEVICE_WACOM(0xD4) }, + { USB_DEVICE_WACOM(0xD5) }, { USB_DEVICE_WACOM(0xD6) }, { USB_DEVICE_WACOM(0xD7) }, { USB_DEVICE_WACOM(0xD8) }, diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index ae00604a6a8..f5d66859f23 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -244,6 +244,7 @@ struct mxt_finger { int x; int y; int area; + int pressure; }; /* Each client has this additional data */ @@ -536,6 +537,8 @@ static void mxt_input_report(struct mxt_data *data, int single_id) finger[id].x); input_report_abs(input_dev, ABS_MT_POSITION_Y, finger[id].y); + input_report_abs(input_dev, ABS_MT_PRESSURE, + finger[id].pressure); } else { finger[id].status = 0; } @@ -546,6 +549,8 @@ static void mxt_input_report(struct mxt_data *data, int single_id) if (status != MXT_RELEASE) { input_report_abs(input_dev, ABS_X, finger[single_id].x); input_report_abs(input_dev, ABS_Y, finger[single_id].y); + input_report_abs(input_dev, + ABS_PRESSURE, finger[single_id].pressure); } input_sync(input_dev); @@ -560,6 +565,7 @@ static void mxt_input_touchevent(struct mxt_data *data, int x; int y; int area; + int pressure; /* Check the touch is present on the screen */ if (!(status & MXT_DETECT)) { @@ -584,6 +590,7 @@ static void mxt_input_touchevent(struct mxt_data *data, y = y >> 2; area = message->message[4]; + pressure = message->message[5]; dev_dbg(dev, "[%d] %s x: %d, y: %d, area: %d\n", id, status & MXT_MOVE ? "moved" : "pressed", @@ -594,6 +601,7 @@ static void mxt_input_touchevent(struct mxt_data *data, finger[id].x = x; finger[id].y = y; finger[id].area = area; + finger[id].pressure = pressure; mxt_input_report(data, id); } @@ -1116,6 +1124,8 @@ static int __devinit mxt_probe(struct i2c_client *client, 0, data->max_x, 0, 0); input_set_abs_params(input_dev, ABS_Y, 0, data->max_y, 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, + 0, 255, 0, 0); /* For multi touch */ input_mt_init_slots(input_dev, MXT_MAX_FINGER); @@ -1125,6 +1135,8 @@ static int __devinit mxt_probe(struct i2c_client *client, 0, data->max_x, 0, 0); input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, data->max_y, 0, 0); + input_set_abs_params(input_dev, ABS_MT_PRESSURE, + 0, 255, 0, 0); input_set_drvdata(input_dev, data); i2c_set_clientdata(client, data); diff --git a/drivers/input/touchscreen/max11801_ts.c b/drivers/input/touchscreen/max11801_ts.c index 4f2713d9279..4627fe55b40 100644 --- a/drivers/input/touchscreen/max11801_ts.c +++ b/drivers/input/touchscreen/max11801_ts.c @@ -9,7 +9,8 @@ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. */ /* diff --git a/drivers/input/touchscreen/tnetv107x-ts.c b/drivers/input/touchscreen/tnetv107x-ts.c index 089b0a0f3d8..0e8f63e5b36 100644 --- a/drivers/input/touchscreen/tnetv107x-ts.c +++ b/drivers/input/touchscreen/tnetv107x-ts.c @@ -13,6 +13,7 @@ * GNU General Public License for more details. */ +#include <linux/module.h> #include <linux/kernel.h> #include <linux/err.h> #include <linux/errno.h> diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c index c14412ef464..9941d39df43 100644 --- a/drivers/input/touchscreen/wacom_w8001.c +++ b/drivers/input/touchscreen/wacom_w8001.c @@ -383,6 +383,8 @@ static int w8001_setup(struct w8001 *w8001) dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); strlcat(w8001->name, "Wacom Serial", sizeof(w8001->name)); + __set_bit(INPUT_PROP_DIRECT, dev->propbit); + /* penabled? */ error = w8001_command(w8001, W8001_CMD_QUERY, true); if (!error) { diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c index a14f8dc2346..0e4227f457a 100644 --- a/drivers/iommu/amd_iommu.c +++ b/drivers/iommu/amd_iommu.c @@ -605,7 +605,9 @@ static void build_inv_all(struct iommu_cmd *cmd) * Writes the command to the IOMMUs command buffer and informs the * hardware about the new command. */ -static int iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd) +static int iommu_queue_command_sync(struct amd_iommu *iommu, + struct iommu_cmd *cmd, + bool sync) { u32 left, tail, head, next_tail; unsigned long flags; @@ -639,13 +641,18 @@ again: copy_cmd_to_buffer(iommu, cmd, tail); /* We need to sync now to make sure all commands are processed */ - iommu->need_sync = true; + iommu->need_sync = sync; spin_unlock_irqrestore(&iommu->lock, flags); return 0; } +static int iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd) +{ + return iommu_queue_command_sync(iommu, cmd, true); +} + /* * This function queues a completion wait command into the command * buffer of an IOMMU @@ -661,7 +668,7 @@ static int iommu_completion_wait(struct amd_iommu *iommu) build_completion_wait(&cmd, (u64)&sem); - ret = iommu_queue_command(iommu, &cmd); + ret = iommu_queue_command_sync(iommu, &cmd, false); if (ret) return ret; @@ -840,14 +847,9 @@ static void domain_flush_complete(struct protection_domain *domain) static void domain_flush_devices(struct protection_domain *domain) { struct iommu_dev_data *dev_data; - unsigned long flags; - - spin_lock_irqsave(&domain->lock, flags); list_for_each_entry(dev_data, &domain->dev_list, list) device_flush_dte(dev_data); - - spin_unlock_irqrestore(&domain->lock, flags); } /**************************************************************************** diff --git a/drivers/iommu/dmar.c b/drivers/iommu/dmar.c index 3dc9befa5ae..6dcc7e2d54d 100644 --- a/drivers/iommu/dmar.c +++ b/drivers/iommu/dmar.c @@ -1388,7 +1388,7 @@ int dmar_set_interrupt(struct intel_iommu *iommu) return ret; } - ret = request_irq(irq, dmar_fault, 0, iommu->name, iommu); + ret = request_irq(irq, dmar_fault, IRQF_NO_THREAD, iommu->name, iommu); if (ret) printk(KERN_ERR "IOMMU: can't request irq\n"); return ret; diff --git a/drivers/leds/leds-ams-delta.c b/drivers/leds/leds-ams-delta.c index b9826032450..8c00937bf7e 100644 --- a/drivers/leds/leds-ams-delta.c +++ b/drivers/leds/leds-ams-delta.c @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ +#include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> diff --git a/drivers/leds/leds-bd2802.c b/drivers/leds/leds-bd2802.c index 3ebe3824662..ea2185531f8 100644 --- a/drivers/leds/leds-bd2802.c +++ b/drivers/leds/leds-bd2802.c @@ -662,6 +662,11 @@ failed_unregister_led1_R: static void bd2802_unregister_led_classdev(struct bd2802_led *led) { cancel_work_sync(&led->work); + led_classdev_unregister(&led->cdev_led2b); + led_classdev_unregister(&led->cdev_led2g); + led_classdev_unregister(&led->cdev_led2r); + led_classdev_unregister(&led->cdev_led1b); + led_classdev_unregister(&led->cdev_led1g); led_classdev_unregister(&led->cdev_led1r); } diff --git a/drivers/leds/leds-hp6xx.c b/drivers/leds/leds-hp6xx.c index e4ce1fd4633..bcfbd3a60ea 100644 --- a/drivers/leds/leds-hp6xx.c +++ b/drivers/leds/leds-hp6xx.c @@ -10,6 +10,7 @@ * published by the Free Software Foundation. */ +#include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> diff --git a/drivers/leds/ledtrig-timer.c b/drivers/leds/ledtrig-timer.c index d87c9d02f78..328c64c0841 100644 --- a/drivers/leds/ledtrig-timer.c +++ b/drivers/leds/ledtrig-timer.c @@ -41,6 +41,7 @@ static ssize_t led_delay_on_store(struct device *dev, if (count == size) { led_blink_set(led_cdev, &state, &led_cdev->blink_delay_off); + led_cdev->blink_delay_on = state; ret = count; } @@ -69,6 +70,7 @@ static ssize_t led_delay_off_store(struct device *dev, if (count == size) { led_blink_set(led_cdev, &led_cdev->blink_delay_on, &state); + led_cdev->blink_delay_off = state; ret = count; } diff --git a/drivers/md/linear.h b/drivers/md/linear.h index 0ce29b61605..2f2da05b2ce 100644 --- a/drivers/md/linear.h +++ b/drivers/md/linear.h @@ -10,9 +10,9 @@ typedef struct dev_info dev_info_t; struct linear_private_data { + struct rcu_head rcu; sector_t array_sectors; dev_info_t disks[0]; - struct rcu_head rcu; }; diff --git a/drivers/md/md.c b/drivers/md/md.c index 8e221a20f5d..5404b229582 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -848,7 +848,7 @@ void md_super_write(mddev_t *mddev, mdk_rdev_t *rdev, bio->bi_end_io = super_written; atomic_inc(&mddev->pending_writes); - submit_bio(REQ_WRITE | REQ_SYNC | REQ_FLUSH | REQ_FUA, bio); + submit_bio(WRITE_FLUSH_FUA, bio); } void md_super_wait(mddev_t *mddev) @@ -1138,8 +1138,11 @@ static int super_90_load(mdk_rdev_t *rdev, mdk_rdev_t *refdev, int minor_version ret = 0; } rdev->sectors = rdev->sb_start; + /* Limit to 4TB as metadata cannot record more than that */ + if (rdev->sectors >= (2ULL << 32)) + rdev->sectors = (2ULL << 32) - 2; - if (rdev->sectors < sb->size * 2 && sb->level > 1) + if (rdev->sectors < ((sector_t)sb->size) * 2 && sb->level >= 1) /* "this cannot possibly happen" ... */ ret = -EINVAL; @@ -1173,7 +1176,7 @@ static int super_90_validate(mddev_t *mddev, mdk_rdev_t *rdev) mddev->clevel[0] = 0; mddev->layout = sb->layout; mddev->raid_disks = sb->raid_disks; - mddev->dev_sectors = sb->size * 2; + mddev->dev_sectors = ((sector_t)sb->size) * 2; mddev->events = ev1; mddev->bitmap_info.offset = 0; mddev->bitmap_info.default_offset = MD_SB_BYTES >> 9; @@ -1415,6 +1418,11 @@ super_90_rdev_size_change(mdk_rdev_t *rdev, sector_t num_sectors) rdev->sb_start = calc_dev_sboffset(rdev); if (!num_sectors || num_sectors > rdev->sb_start) num_sectors = rdev->sb_start; + /* Limit to 4TB as metadata cannot record more than that. + * 4TB == 2^32 KB, or 2*2^32 sectors. + */ + if (num_sectors >= (2ULL << 32)) + num_sectors = (2ULL << 32) - 2; md_super_write(rdev->mddev, rdev, rdev->sb_start, rdev->sb_size, rdev->sb_page); md_super_wait(rdev->mddev); @@ -1738,6 +1746,11 @@ static void super_1_sync(mddev_t *mddev, mdk_rdev_t *rdev) sb->level = cpu_to_le32(mddev->level); sb->layout = cpu_to_le32(mddev->layout); + if (test_bit(WriteMostly, &rdev->flags)) + sb->devflags |= WriteMostly1; + else + sb->devflags &= ~WriteMostly1; + if (mddev->bitmap && mddev->bitmap_info.file == NULL) { sb->bitmap_offset = cpu_to_le32((__u32)mddev->bitmap_info.offset); sb->feature_map = cpu_to_le32(MD_FEATURE_BITMAP_OFFSET); @@ -2561,7 +2574,10 @@ state_store(mdk_rdev_t *rdev, const char *buf, size_t len) int err = -EINVAL; if (cmd_match(buf, "faulty") && rdev->mddev->pers) { md_error(rdev->mddev, rdev); - err = 0; + if (test_bit(Faulty, &rdev->flags)) + err = 0; + else + err = -EBUSY; } else if (cmd_match(buf, "remove")) { if (rdev->raid_disk >= 0) err = -EBUSY; @@ -2584,7 +2600,7 @@ state_store(mdk_rdev_t *rdev, const char *buf, size_t len) err = 0; } else if (cmd_match(buf, "-blocked")) { if (!test_bit(Faulty, &rdev->flags) && - test_bit(BlockedBadBlocks, &rdev->flags)) { + rdev->badblocks.unacked_exist) { /* metadata handler doesn't understand badblocks, * so we need to fail the device */ @@ -5983,6 +5999,8 @@ static int set_disk_faulty(mddev_t *mddev, dev_t dev) return -ENODEV; md_error(mddev, rdev); + if (!test_bit(Faulty, &rdev->flags)) + return -EBUSY; return 0; } diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 32323f0afd8..f4622dd8fc5 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1099,12 +1099,11 @@ read_again: bio_list_add(&conf->pending_bio_list, mbio); spin_unlock_irqrestore(&conf->device_lock, flags); } - r1_bio_write_done(r1_bio); - - /* In case raid1d snuck in to freeze_array */ - wake_up(&conf->wait_barrier); - + /* Mustn't call r1_bio_write_done before this next test, + * as it could result in the bio being freed. + */ if (sectors_handled < (bio->bi_size >> 9)) { + r1_bio_write_done(r1_bio); /* We need another r1_bio. It has already been counted * in bio->bi_phys_segments */ @@ -1117,6 +1116,11 @@ read_again: goto retry_write; } + r1_bio_write_done(r1_bio); + + /* In case raid1d snuck in to freeze_array */ + wake_up(&conf->wait_barrier); + if (do_sync || !bitmap || !plugged) md_wakeup_thread(mddev->thread); diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 8b29cd4f01c..d7a8468ddea 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -337,6 +337,21 @@ static void close_write(r10bio_t *r10_bio) md_write_end(r10_bio->mddev); } +static void one_write_done(r10bio_t *r10_bio) +{ + if (atomic_dec_and_test(&r10_bio->remaining)) { + if (test_bit(R10BIO_WriteError, &r10_bio->state)) + reschedule_retry(r10_bio); + else { + close_write(r10_bio); + if (test_bit(R10BIO_MadeGood, &r10_bio->state)) + reschedule_retry(r10_bio); + else + raid_end_bio_io(r10_bio); + } + } +} + static void raid10_end_write_request(struct bio *bio, int error) { int uptodate = test_bit(BIO_UPTODATE, &bio->bi_flags); @@ -387,17 +402,7 @@ static void raid10_end_write_request(struct bio *bio, int error) * Let's see if all mirrored write operations have finished * already. */ - if (atomic_dec_and_test(&r10_bio->remaining)) { - if (test_bit(R10BIO_WriteError, &r10_bio->state)) - reschedule_retry(r10_bio); - else { - close_write(r10_bio); - if (test_bit(R10BIO_MadeGood, &r10_bio->state)) - reschedule_retry(r10_bio); - else - raid_end_bio_io(r10_bio); - } - } + one_write_done(r10_bio); if (dec_rdev) rdev_dec_pending(conf->mirrors[dev].rdev, conf->mddev); } @@ -1127,20 +1132,12 @@ retry_write: spin_unlock_irqrestore(&conf->device_lock, flags); } - if (atomic_dec_and_test(&r10_bio->remaining)) { - /* This matches the end of raid10_end_write_request() */ - bitmap_endwrite(r10_bio->mddev->bitmap, r10_bio->sector, - r10_bio->sectors, - !test_bit(R10BIO_Degraded, &r10_bio->state), - 0); - md_write_end(mddev); - raid_end_bio_io(r10_bio); - } - - /* In case raid10d snuck in to freeze_array */ - wake_up(&conf->wait_barrier); + /* Don't remove the bias on 'remaining' (one_write_done) until + * after checking if we need to go around again. + */ if (sectors_handled < (bio->bi_size >> 9)) { + one_write_done(r10_bio); /* We need another r10_bio. It has already been counted * in bio->bi_phys_segments. */ @@ -1154,6 +1151,10 @@ retry_write: r10_bio->state = 0; goto retry_write; } + one_write_done(r10_bio); + + /* In case raid10d snuck in to freeze_array */ + wake_up(&conf->wait_barrier); if (do_sync || !mddev->bitmap || !plugged) md_wakeup_thread(mddev->thread); diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index dbae459fb02..43709fa6b6d 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3336,7 +3336,7 @@ static void handle_stripe(struct stripe_head *sh) finish: /* wait for this device to become unblocked */ - if (unlikely(s.blocked_rdev)) + if (conf->mddev->external && unlikely(s.blocked_rdev)) md_wait_for_blocked_rdev(s.blocked_rdev, conf->mddev); if (s.handle_bad_blocks) diff --git a/drivers/media/dvb/dvb-usb/vp7045.c b/drivers/media/dvb/dvb-usb/vp7045.c index 3db89e3cb0b..536c16c943b 100644 --- a/drivers/media/dvb/dvb-usb/vp7045.c +++ b/drivers/media/dvb/dvb-usb/vp7045.c @@ -224,26 +224,8 @@ static struct dvb_usb_device_properties vp7045_properties; static int vp7045_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - struct dvb_usb_device *d; - int ret = dvb_usb_device_init(intf, &vp7045_properties, - THIS_MODULE, &d, adapter_nr); - if (ret) - return ret; - - d->priv = kmalloc(20, GFP_KERNEL); - if (!d->priv) { - dvb_usb_device_exit(intf); - return -ENOMEM; - } - - return ret; -} - -static void vp7045_usb_disconnect(struct usb_interface *intf) -{ - struct dvb_usb_device *d = usb_get_intfdata(intf); - kfree(d->priv); - dvb_usb_device_exit(intf); + return dvb_usb_device_init(intf, &vp7045_properties, + THIS_MODULE, NULL, adapter_nr); } static struct usb_device_id vp7045_usb_table [] = { @@ -258,7 +240,7 @@ MODULE_DEVICE_TABLE(usb, vp7045_usb_table); static struct dvb_usb_device_properties vp7045_properties = { .usb_ctrl = CYPRESS_FX2, .firmware = "dvb-usb-vp7045-01.fw", - .size_of_priv = sizeof(u8 *), + .size_of_priv = 20, .num_adapters = 1, .adapter = { @@ -305,7 +287,7 @@ static struct dvb_usb_device_properties vp7045_properties = { static struct usb_driver vp7045_usb_driver = { .name = "dvb_usb_vp7045", .probe = vp7045_usb_probe, - .disconnect = vp7045_usb_disconnect, + .disconnect = dvb_usb_device_exit, .id_table = vp7045_usb_table, }; diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c index eae05b50047..144f3f55d76 100644 --- a/drivers/media/rc/nuvoton-cir.c +++ b/drivers/media/rc/nuvoton-cir.c @@ -618,7 +618,6 @@ static void nvt_dump_rx_buf(struct nvt_dev *nvt) static void nvt_process_rx_ir_data(struct nvt_dev *nvt) { DEFINE_IR_RAW_EVENT(rawir); - unsigned int count; u32 carrier; u8 sample; int i; @@ -631,65 +630,38 @@ static void nvt_process_rx_ir_data(struct nvt_dev *nvt) if (nvt->carrier_detect_enabled) carrier = nvt_rx_carrier_detect(nvt); - count = nvt->pkts; - nvt_dbg_verbose("Processing buffer of len %d", count); + nvt_dbg_verbose("Processing buffer of len %d", nvt->pkts); init_ir_raw_event(&rawir); - for (i = 0; i < count; i++) { - nvt->pkts--; + for (i = 0; i < nvt->pkts; i++) { sample = nvt->buf[i]; rawir.pulse = ((sample & BUF_PULSE_BIT) != 0); rawir.duration = US_TO_NS((sample & BUF_LEN_MASK) * SAMPLE_PERIOD); - if ((sample & BUF_LEN_MASK) == BUF_LEN_MASK) { - if (nvt->rawir.pulse == rawir.pulse) - nvt->rawir.duration += rawir.duration; - else { - nvt->rawir.duration = rawir.duration; - nvt->rawir.pulse = rawir.pulse; - } - continue; - } - - rawir.duration += nvt->rawir.duration; + nvt_dbg("Storing %s with duration %d", + rawir.pulse ? "pulse" : "space", rawir.duration); - init_ir_raw_event(&nvt->rawir); - nvt->rawir.duration = 0; - nvt->rawir.pulse = rawir.pulse; - - if (sample == BUF_PULSE_BIT) - rawir.pulse = false; - - if (rawir.duration) { - nvt_dbg("Storing %s with duration %d", - rawir.pulse ? "pulse" : "space", - rawir.duration); - - ir_raw_event_store_with_filter(nvt->rdev, &rawir); - } + ir_raw_event_store_with_filter(nvt->rdev, &rawir); /* * BUF_PULSE_BIT indicates end of IR data, BUF_REPEAT_BYTE * indicates end of IR signal, but new data incoming. In both * cases, it means we're ready to call ir_raw_event_handle */ - if ((sample == BUF_PULSE_BIT) && nvt->pkts) { + if ((sample == BUF_PULSE_BIT) && (i + 1 < nvt->pkts)) { nvt_dbg("Calling ir_raw_event_handle (signal end)\n"); ir_raw_event_handle(nvt->rdev); } } + nvt->pkts = 0; + nvt_dbg("Calling ir_raw_event_handle (buffer empty)\n"); ir_raw_event_handle(nvt->rdev); - if (nvt->pkts) { - nvt_dbg("Odd, pkts should be 0 now... (its %u)", nvt->pkts); - nvt->pkts = 0; - } - nvt_dbg_verbose("%s done", __func__); } @@ -1048,7 +1020,6 @@ static int nvt_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id) spin_lock_init(&nvt->nvt_lock); spin_lock_init(&nvt->tx.lock); - init_ir_raw_event(&nvt->rawir); ret = -EBUSY; /* now claim resources */ diff --git a/drivers/media/rc/nuvoton-cir.h b/drivers/media/rc/nuvoton-cir.h index 1241fc89a36..0d5e0872a2e 100644 --- a/drivers/media/rc/nuvoton-cir.h +++ b/drivers/media/rc/nuvoton-cir.h @@ -67,7 +67,6 @@ static int debug; struct nvt_dev { struct pnp_dev *pdev; struct rc_dev *rdev; - struct ir_raw_event rawir; spinlock_t nvt_lock; diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index 0800433b209..18305c89083 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -2858,7 +2858,6 @@ static void ov7xx0_configure(struct sd *sd) case 0x60: PDEBUG(D_PROBE, "Sensor is a OV7660"); sd->sensor = SEN_OV7660; - sd->invert_led = 0; break; default: PDEBUG(D_PROBE, "Unknown sensor: 0x76%x", low); @@ -3337,7 +3336,6 @@ static int sd_config(struct gspca_dev *gspca_dev, case BRIDGE_OV519: cam->cam_mode = ov519_vga_mode; cam->nmodes = ARRAY_SIZE(ov519_vga_mode); - sd->invert_led = !sd->invert_led; break; case BRIDGE_OVFX2: cam->cam_mode = ov519_vga_mode; @@ -5005,24 +5003,24 @@ static const struct sd_desc sd_desc = { /* -- module initialisation -- */ static const struct usb_device_id device_table[] = { {USB_DEVICE(0x041e, 0x4003), .driver_info = BRIDGE_W9968CF }, - {USB_DEVICE(0x041e, 0x4052), .driver_info = BRIDGE_OV519 }, - {USB_DEVICE(0x041e, 0x405f), + {USB_DEVICE(0x041e, 0x4052), .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED }, + {USB_DEVICE(0x041e, 0x405f), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x041e, 0x4060), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x041e, 0x4061), .driver_info = BRIDGE_OV519 }, - {USB_DEVICE(0x041e, 0x4064), - .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED }, + {USB_DEVICE(0x041e, 0x4064), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x041e, 0x4067), .driver_info = BRIDGE_OV519 }, - {USB_DEVICE(0x041e, 0x4068), + {USB_DEVICE(0x041e, 0x4068), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x045e, 0x028c), .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED }, - {USB_DEVICE(0x045e, 0x028c), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x054c, 0x0154), .driver_info = BRIDGE_OV519 }, - {USB_DEVICE(0x054c, 0x0155), - .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED }, + {USB_DEVICE(0x054c, 0x0155), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x05a9, 0x0511), .driver_info = BRIDGE_OV511 }, {USB_DEVICE(0x05a9, 0x0518), .driver_info = BRIDGE_OV518 }, - {USB_DEVICE(0x05a9, 0x0519), .driver_info = BRIDGE_OV519 }, - {USB_DEVICE(0x05a9, 0x0530), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x05a9, 0x0519), + .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED }, + {USB_DEVICE(0x05a9, 0x0530), + .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED }, {USB_DEVICE(0x05a9, 0x2800), .driver_info = BRIDGE_OVFX2 }, {USB_DEVICE(0x05a9, 0x4519), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x05a9, 0x8519), .driver_info = BRIDGE_OV519 }, diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 81b8a600783..c477ad11f10 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -2386,7 +2386,7 @@ static int sd_start(struct gspca_dev *gspca_dev) reg_w1(gspca_dev, 0x01, 0x22); msleep(100); reg01 = SCL_SEL_OD | S_PDN_INV; - reg17 &= MCK_SIZE_MASK; + reg17 &= ~MCK_SIZE_MASK; reg17 |= 0x04; /* clock / 4 */ break; } @@ -2532,6 +2532,10 @@ static int sd_start(struct gspca_dev *gspca_dev) if (!mode) { /* if 640x480 */ reg17 &= ~MCK_SIZE_MASK; reg17 |= 0x04; /* clock / 4 */ + } else { + reg01 &= ~SYS_SEL_48M; /* clk 24Mz */ + reg17 &= ~MCK_SIZE_MASK; + reg17 |= 0x02; /* clock / 2 */ } break; case SENSOR_OV7630: diff --git a/drivers/media/video/pwc/pwc-v4l.c b/drivers/media/video/pwc/pwc-v4l.c index e9a0e94b999..8c70e64444e 100644 --- a/drivers/media/video/pwc/pwc-v4l.c +++ b/drivers/media/video/pwc/pwc-v4l.c @@ -338,7 +338,7 @@ int pwc_init_controls(struct pwc_device *pdev) if (pdev->restore_factory) pdev->restore_factory->flags = V4L2_CTRL_FLAG_UPDATE; - if (!pdev->features & FEATURE_MOTOR_PANTILT) + if (!(pdev->features & FEATURE_MOTOR_PANTILT)) return hdl->error; /* Motor pan / tilt / reset */ diff --git a/drivers/media/video/via-camera.c b/drivers/media/video/via-camera.c index 85d3048c1d6..bb7f17f2a33 100644 --- a/drivers/media/video/via-camera.c +++ b/drivers/media/video/via-camera.c @@ -1332,6 +1332,8 @@ static __devinit bool viacam_serial_is_enabled(void) struct pci_bus *pbus = pci_find_bus(0, 0); u8 cbyte; + if (!pbus) + return false; pci_bus_read_config_byte(pbus, VIACAM_SERIAL_DEVFN, VIACAM_SERIAL_CREG, &cbyte); if ((cbyte & VIACAM_SERIAL_BIT) == 0) diff --git a/drivers/mfd/max8997.c b/drivers/mfd/max8997.c index 5d1fca0277e..f83103b8970 100644 --- a/drivers/mfd/max8997.c +++ b/drivers/mfd/max8997.c @@ -135,10 +135,13 @@ static int max8997_i2c_probe(struct i2c_client *i2c, max8997->dev = &i2c->dev; max8997->i2c = i2c; max8997->type = id->driver_data; + max8997->irq = i2c->irq; if (!pdata) goto err; + max8997->irq_base = pdata->irq_base; + max8997->ono = pdata->ono; max8997->wakeup = pdata->wakeup; mutex_init(&max8997->iolock); @@ -152,6 +155,8 @@ static int max8997_i2c_probe(struct i2c_client *i2c, pm_runtime_set_active(max8997->dev); + max8997_irq_init(max8997); + mfd_add_devices(max8997->dev, -1, max8997_devs, ARRAY_SIZE(max8997_devs), NULL, 0); diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index 29601e7d606..86e14583a08 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -17,6 +17,7 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/kernel.h> +#include <linux/module.h> #include <linux/types.h> #include <linux/slab.h> #include <linux/delay.h> @@ -676,7 +677,6 @@ static void usbhs_omap_tll_init(struct device *dev, u8 tll_channel_count) | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF | OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE); - reg |= (1 << (i + 1)); } else continue; diff --git a/drivers/mfd/tps65910-irq.c b/drivers/mfd/tps65910-irq.c index 2bfad5c86cc..a56be931551 100644 --- a/drivers/mfd/tps65910-irq.c +++ b/drivers/mfd/tps65910-irq.c @@ -178,8 +178,10 @@ int tps65910_irq_init(struct tps65910 *tps65910, int irq, switch (tps65910_chip_id(tps65910)) { case TPS65910: tps65910->irq_num = TPS65910_NUM_IRQ; + break; case TPS65911: tps65910->irq_num = TPS65911_NUM_IRQ; + break; } /* Register with genirq */ diff --git a/drivers/mfd/twl4030-madc.c b/drivers/mfd/twl4030-madc.c index b5d598c3aa7..7cbf2aa9e64 100644 --- a/drivers/mfd/twl4030-madc.c +++ b/drivers/mfd/twl4030-madc.c @@ -510,8 +510,9 @@ int twl4030_madc_conversion(struct twl4030_madc_request *req) u8 ch_msb, ch_lsb; int ret; - if (!req) + if (!req || !twl4030_madc) return -EINVAL; + mutex_lock(&twl4030_madc->lock); if (req->method < TWL4030_MADC_RT || req->method > TWL4030_MADC_SW2) { ret = -EINVAL; @@ -706,6 +707,8 @@ static int __devinit twl4030_madc_probe(struct platform_device *pdev) if (!madc) return -ENOMEM; + madc->dev = &pdev->dev; + /* * Phoenix provides 2 interrupt lines. The first one is connected to * the OMAP. The other one can be connected to the other processor such diff --git a/drivers/mfd/wm8350-gpio.c b/drivers/mfd/wm8350-gpio.c index ebf99bef392..d584f6b4d6e 100644 --- a/drivers/mfd/wm8350-gpio.c +++ b/drivers/mfd/wm8350-gpio.c @@ -37,7 +37,7 @@ static int gpio_set_dir(struct wm8350 *wm8350, int gpio, int dir) return ret; } -static int gpio_set_debounce(struct wm8350 *wm8350, int gpio, int db) +static int wm8350_gpio_set_debounce(struct wm8350 *wm8350, int gpio, int db) { if (db == WM8350_GPIO_DEBOUNCE_ON) return wm8350_set_bits(wm8350, WM8350_GPIO_DEBOUNCE, @@ -210,7 +210,7 @@ int wm8350_gpio_config(struct wm8350 *wm8350, int gpio, int dir, int func, goto err; if (gpio_set_polarity(wm8350, gpio, pol)) goto err; - if (gpio_set_debounce(wm8350, gpio, debounce)) + if (wm8350_gpio_set_debounce(wm8350, gpio, debounce)) goto err; if (gpio_set_dir(wm8350, gpio, dir)) goto err; diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 0a4d86c6c4a..2d6423c2d19 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -146,6 +146,7 @@ config PHANTOM config INTEL_MID_PTI tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard" + depends on PCI default n help The PTI (Parallel Trace Interface) driver directs diff --git a/drivers/misc/ab8500-pwm.c b/drivers/misc/ab8500-pwm.c index 54e3d05b63c..35903154ca2 100644 --- a/drivers/misc/ab8500-pwm.c +++ b/drivers/misc/ab8500-pwm.c @@ -164,5 +164,5 @@ subsys_initcall(ab8500_pwm_init); module_exit(ab8500_pwm_exit); MODULE_AUTHOR("Arun MURTHY <arun.murthy@stericsson.com>"); MODULE_DESCRIPTION("AB8500 Pulse Width Modulation Driver"); -MODULE_ALIAS("AB8500 PWM driver"); +MODULE_ALIAS("platform:ab8500-pwm"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/misc/fsa9480.c b/drivers/misc/fsa9480.c index 5325a7e70dc..27dc0d21aaf 100644 --- a/drivers/misc/fsa9480.c +++ b/drivers/misc/fsa9480.c @@ -455,7 +455,7 @@ static int __devinit fsa9480_probe(struct i2c_client *client, fail2: if (client->irq) - free_irq(client->irq, NULL); + free_irq(client->irq, usbsw); fail1: i2c_set_clientdata(client, NULL); kfree(usbsw); @@ -466,7 +466,7 @@ static int __devexit fsa9480_remove(struct i2c_client *client) { struct fsa9480_usbsw *usbsw = i2c_get_clientdata(client); if (client->irq) - free_irq(client->irq, NULL); + free_irq(client->irq, usbsw); i2c_set_clientdata(client, NULL); sysfs_remove_group(&client->dev.kobj, &fsa9480_group); diff --git a/drivers/misc/pti.c b/drivers/misc/pti.c index 8653bd0b1a3..0b56e3f4357 100644 --- a/drivers/misc/pti.c +++ b/drivers/misc/pti.c @@ -33,6 +33,8 @@ #include <linux/mutex.h> #include <linux/miscdevice.h> #include <linux/pti.h> +#include <linux/slab.h> +#include <linux/uaccess.h> #define DRIVERNAME "pti" #define PCINAME "pciPTI" @@ -163,6 +165,11 @@ static void pti_write_to_aperture(struct pti_masterchannel *mc, static void pti_control_frame_built_and_sent(struct pti_masterchannel *mc, const char *thread_name) { + /* + * Since we access the comm member in current's task_struct, we only + * need to be as large as what 'comm' in that structure is. + */ + char comm[TASK_COMM_LEN]; struct pti_masterchannel mccontrol = {.master = CONTROL_ID, .channel = 0}; const char *thread_name_p; @@ -170,13 +177,6 @@ static void pti_control_frame_built_and_sent(struct pti_masterchannel *mc, u8 control_frame[CONTROL_FRAME_LEN]; if (!thread_name) { - /* - * Since we access the comm member in current's task_struct, - * we only need to be as large as what 'comm' in that - * structure is. - */ - char comm[TASK_COMM_LEN]; - if (!in_interrupt()) get_task_comm(comm, current); else diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c index 54c91ffe4a9..ba168a7d54d 100644 --- a/drivers/misc/ti-st/st_core.c +++ b/drivers/misc/ti-st/st_core.c @@ -338,6 +338,12 @@ void st_int_recv(void *disc_data, /* Unknow packet? */ default: type = *ptr; + if (st_gdata->list[type] == NULL) { + pr_err("chip/interface misbehavior dropping" + " frame starting with 0x%02x", type); + goto done; + + } st_gdata->rx_skb = alloc_skb( st_gdata->list[type]->max_frame_size, GFP_ATOMIC); @@ -354,6 +360,7 @@ void st_int_recv(void *disc_data, ptr++; count--; } +done: spin_unlock_irqrestore(&st_gdata->lock, flags); pr_debug("done %s", __func__); return; @@ -717,9 +724,10 @@ static void st_tty_close(struct tty_struct *tty) */ spin_lock_irqsave(&st_gdata->lock, flags); for (i = ST_BT; i < ST_MAX_CHANNELS; i++) { - if (st_gdata->list[i] != NULL) + if (st_gdata->is_registered[i] == true) pr_err("%d not un-registered", i); st_gdata->list[i] = NULL; + st_gdata->is_registered[i] = false; } st_gdata->protos_registered = 0; spin_unlock_irqrestore(&st_gdata->lock, flags); diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c index 38fd2f04c07..3a3580566df 100644 --- a/drivers/misc/ti-st/st_kim.c +++ b/drivers/misc/ti-st/st_kim.c @@ -68,6 +68,7 @@ void validate_firmware_response(struct kim_data_s *kim_gdata) if (unlikely(skb->data[5] != 0)) { pr_err("no proper response during fw download"); pr_err("data6 %x", skb->data[5]); + kfree_skb(skb); return; /* keep waiting for the proper response */ } /* becos of all the script being downloaded */ @@ -210,6 +211,7 @@ static long read_local_version(struct kim_data_s *kim_gdata, char *bts_scr_name) pr_err(" waiting for ver info- timed out "); return -ETIMEDOUT; } + INIT_COMPLETION(kim_gdata->kim_rcvd); version = MAKEWORD(kim_gdata->resp_buffer[13], @@ -298,6 +300,7 @@ static long download_firmware(struct kim_data_s *kim_gdata) switch (((struct bts_action *)ptr)->type) { case ACTION_SEND_COMMAND: /* action send */ + pr_debug("S"); action_ptr = &(((struct bts_action *)ptr)->data[0]); if (unlikely (((struct hci_command *)action_ptr)->opcode == @@ -335,6 +338,10 @@ static long download_firmware(struct kim_data_s *kim_gdata) release_firmware(kim_gdata->fw_entry); return -ETIMEDOUT; } + /* reinit completion before sending for the + * relevant wait + */ + INIT_COMPLETION(kim_gdata->kim_rcvd); /* * Free space found in uart buffer, call st_int_write @@ -361,6 +368,7 @@ static long download_firmware(struct kim_data_s *kim_gdata) } break; case ACTION_WAIT_EVENT: /* wait */ + pr_debug("W"); if (!wait_for_completion_timeout (&kim_gdata->kim_rcvd, msecs_to_jiffies(CMD_RESP_TIME))) { @@ -434,11 +442,17 @@ long st_kim_start(void *kim_data) { long err = 0; long retry = POR_RETRY_COUNT; + struct ti_st_plat_data *pdata; struct kim_data_s *kim_gdata = (struct kim_data_s *)kim_data; pr_info(" %s", __func__); + pdata = kim_gdata->kim_pdev->dev.platform_data; do { + /* platform specific enabling code here */ + if (pdata->chip_enable) + pdata->chip_enable(kim_gdata); + /* Configure BT nShutdown to HIGH state */ gpio_set_value(kim_gdata->nshutdown, GPIO_LOW); mdelay(5); /* FIXME: a proper toggle */ @@ -460,6 +474,12 @@ long st_kim_start(void *kim_data) pr_info("ldisc_install = 0"); sysfs_notify(&kim_gdata->kim_pdev->dev.kobj, NULL, "install"); + /* the following wait is never going to be completed, + * since the ldisc was never installed, hence serving + * as a mdelay of LDISC_TIME msecs */ + err = wait_for_completion_timeout + (&kim_gdata->ldisc_installed, + msecs_to_jiffies(LDISC_TIME)); err = -ETIMEDOUT; continue; } else { @@ -472,6 +492,13 @@ long st_kim_start(void *kim_data) pr_info("ldisc_install = 0"); sysfs_notify(&kim_gdata->kim_pdev->dev.kobj, NULL, "install"); + /* this wait might be completed, though in the + * tty_close() since the ldisc is already + * installed */ + err = wait_for_completion_timeout + (&kim_gdata->ldisc_installed, + msecs_to_jiffies(LDISC_TIME)); + err = -EINVAL; continue; } else { /* on success don't retry */ break; @@ -489,6 +516,8 @@ long st_kim_stop(void *kim_data) { long err = 0; struct kim_data_s *kim_gdata = (struct kim_data_s *)kim_data; + struct ti_st_plat_data *pdata = + kim_gdata->kim_pdev->dev.platform_data; INIT_COMPLETION(kim_gdata->ldisc_installed); @@ -515,6 +544,10 @@ long st_kim_stop(void *kim_data) gpio_set_value(kim_gdata->nshutdown, GPIO_HIGH); mdelay(1); gpio_set_value(kim_gdata->nshutdown, GPIO_LOW); + + /* platform specific disable */ + if (pdata->chip_disable) + pdata->chip_disable(kim_gdata); return err; } diff --git a/drivers/misc/ti-st/st_ll.c b/drivers/misc/ti-st/st_ll.c index 3f249513885..1ff460a8e9c 100644 --- a/drivers/misc/ti-st/st_ll.c +++ b/drivers/misc/ti-st/st_ll.c @@ -22,6 +22,7 @@ #define pr_fmt(fmt) "(stll) :" fmt #include <linux/skbuff.h> #include <linux/module.h> +#include <linux/platform_device.h> #include <linux/ti_wilink_st.h> /**********************************************************************/ @@ -37,6 +38,9 @@ static void send_ll_cmd(struct st_data_s *st_data, static void ll_device_want_to_sleep(struct st_data_s *st_data) { + struct kim_data_s *kim_data; + struct ti_st_plat_data *pdata; + pr_debug("%s", __func__); /* sanity check */ if (st_data->ll_state != ST_LL_AWAKE) @@ -46,10 +50,19 @@ static void ll_device_want_to_sleep(struct st_data_s *st_data) send_ll_cmd(st_data, LL_SLEEP_ACK); /* update state */ st_data->ll_state = ST_LL_ASLEEP; + + /* communicate to platform about chip asleep */ + kim_data = st_data->kim_data; + pdata = kim_data->kim_pdev->dev.platform_data; + if (pdata->chip_asleep) + pdata->chip_asleep(NULL); } static void ll_device_want_to_wakeup(struct st_data_s *st_data) { + struct kim_data_s *kim_data; + struct ti_st_plat_data *pdata; + /* diff actions in diff states */ switch (st_data->ll_state) { case ST_LL_ASLEEP: @@ -70,6 +83,12 @@ static void ll_device_want_to_wakeup(struct st_data_s *st_data) } /* update state */ st_data->ll_state = ST_LL_AWAKE; + + /* communicate to platform about chip wakeup */ + kim_data = st_data->kim_data; + pdata = kim_data->kim_pdev->dev.platform_data; + if (pdata->chip_asleep) + pdata->chip_awake(NULL); } /**********************************************************************/ diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 1ff5486213f..4c1a648d00f 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -926,6 +926,9 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, /* * Reliable writes are used to implement Forced Unit Access and * REQ_META accesses, and are supported only on MMCs. + * + * XXX: this really needs a good explanation of why REQ_META + * is treated special. */ bool do_rel_wr = ((req->cmd_flags & REQ_FUA) || (req->cmd_flags & REQ_META)) && diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 91a0a7460eb..b27b94078c2 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -133,7 +133,7 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq) if (mrq->done) mrq->done(mrq); - mmc_host_clk_gate(host); + mmc_host_clk_release(host); } } @@ -192,7 +192,7 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq) mrq->stop->mrq = mrq; } } - mmc_host_clk_ungate(host); + mmc_host_clk_hold(host); led_trigger_event(host->led, LED_FULL); host->ops->request(host, mrq); } @@ -728,15 +728,17 @@ static inline void mmc_set_ios(struct mmc_host *host) */ void mmc_set_chip_select(struct mmc_host *host, int mode) { + mmc_host_clk_hold(host); host->ios.chip_select = mode; mmc_set_ios(host); + mmc_host_clk_release(host); } /* * Sets the host clock to the highest possible frequency that * is below "hz". */ -void mmc_set_clock(struct mmc_host *host, unsigned int hz) +static void __mmc_set_clock(struct mmc_host *host, unsigned int hz) { WARN_ON(hz < host->f_min); @@ -747,6 +749,13 @@ void mmc_set_clock(struct mmc_host *host, unsigned int hz) mmc_set_ios(host); } +void mmc_set_clock(struct mmc_host *host, unsigned int hz) +{ + mmc_host_clk_hold(host); + __mmc_set_clock(host, hz); + mmc_host_clk_release(host); +} + #ifdef CONFIG_MMC_CLKGATE /* * This gates the clock by setting it to 0 Hz. @@ -779,7 +788,7 @@ void mmc_ungate_clock(struct mmc_host *host) if (host->clk_old) { BUG_ON(host->ios.clock); /* This call will also set host->clk_gated to false */ - mmc_set_clock(host, host->clk_old); + __mmc_set_clock(host, host->clk_old); } } @@ -807,8 +816,10 @@ void mmc_set_ungated(struct mmc_host *host) */ void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode) { + mmc_host_clk_hold(host); host->ios.bus_mode = mode; mmc_set_ios(host); + mmc_host_clk_release(host); } /* @@ -816,8 +827,10 @@ void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode) */ void mmc_set_bus_width(struct mmc_host *host, unsigned int width) { + mmc_host_clk_hold(host); host->ios.bus_width = width; mmc_set_ios(host); + mmc_host_clk_release(host); } /** @@ -1015,8 +1028,10 @@ u32 mmc_select_voltage(struct mmc_host *host, u32 ocr) ocr &= 3 << bit; + mmc_host_clk_hold(host); host->ios.vdd = bit; mmc_set_ios(host); + mmc_host_clk_release(host); } else { pr_warning("%s: host doesn't support card's voltages\n", mmc_hostname(host)); @@ -1063,8 +1078,10 @@ int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, bool cmd11 */ void mmc_set_timing(struct mmc_host *host, unsigned int timing) { + mmc_host_clk_hold(host); host->ios.timing = timing; mmc_set_ios(host); + mmc_host_clk_release(host); } /* @@ -1072,8 +1089,10 @@ void mmc_set_timing(struct mmc_host *host, unsigned int timing) */ void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type) { + mmc_host_clk_hold(host); host->ios.drv_type = drv_type; mmc_set_ios(host); + mmc_host_clk_release(host); } /* @@ -1091,6 +1110,8 @@ static void mmc_power_up(struct mmc_host *host) { int bit; + mmc_host_clk_hold(host); + /* If ocr is set, we use it */ if (host->ocr) bit = ffs(host->ocr) - 1; @@ -1126,10 +1147,14 @@ static void mmc_power_up(struct mmc_host *host) * time required to reach a stable voltage. */ mmc_delay(10); + + mmc_host_clk_release(host); } static void mmc_power_off(struct mmc_host *host) { + mmc_host_clk_hold(host); + host->ios.clock = 0; host->ios.vdd = 0; @@ -1147,6 +1172,8 @@ static void mmc_power_off(struct mmc_host *host) host->ios.bus_width = MMC_BUS_WIDTH_1; host->ios.timing = MMC_TIMING_LEGACY; mmc_set_ios(host); + + mmc_host_clk_release(host); } /* diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index b29d3e8fd3a..793d0a0dad8 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -119,14 +119,14 @@ static void mmc_host_clk_gate_work(struct work_struct *work) } /** - * mmc_host_clk_ungate - ungate hardware MCI clocks + * mmc_host_clk_hold - ungate hardware MCI clocks * @host: host to ungate. * * Makes sure the host ios.clock is restored to a non-zero value * past this call. Increase clock reference count and ungate clock * if we're the first user. */ -void mmc_host_clk_ungate(struct mmc_host *host) +void mmc_host_clk_hold(struct mmc_host *host) { unsigned long flags; @@ -164,14 +164,14 @@ static bool mmc_host_may_gate_card(struct mmc_card *card) } /** - * mmc_host_clk_gate - gate off hardware MCI clocks + * mmc_host_clk_release - gate off hardware MCI clocks * @host: host to gate. * * Calls the host driver with ios.clock set to zero as often as possible * in order to gate off hardware MCI clocks. Decrease clock reference * count and schedule disabling of clock. */ -void mmc_host_clk_gate(struct mmc_host *host) +void mmc_host_clk_release(struct mmc_host *host) { unsigned long flags; @@ -179,7 +179,7 @@ void mmc_host_clk_gate(struct mmc_host *host) host->clk_requests--; if (mmc_host_may_gate_card(host->card) && !host->clk_requests) - schedule_work(&host->clk_gate_work); + queue_work(system_nrt_wq, &host->clk_gate_work); spin_unlock_irqrestore(&host->clk_lock, flags); } @@ -231,7 +231,7 @@ static inline void mmc_host_clk_exit(struct mmc_host *host) if (cancel_work_sync(&host->clk_gate_work)) mmc_host_clk_gate_delayed(host); if (host->clk_gated) - mmc_host_clk_ungate(host); + mmc_host_clk_hold(host); /* There should be only one user now */ WARN_ON(host->clk_requests > 1); } diff --git a/drivers/mmc/core/host.h b/drivers/mmc/core/host.h index de199f91192..fb8a5cd2e4a 100644 --- a/drivers/mmc/core/host.h +++ b/drivers/mmc/core/host.h @@ -16,16 +16,16 @@ int mmc_register_host_class(void); void mmc_unregister_host_class(void); #ifdef CONFIG_MMC_CLKGATE -void mmc_host_clk_ungate(struct mmc_host *host); -void mmc_host_clk_gate(struct mmc_host *host); +void mmc_host_clk_hold(struct mmc_host *host); +void mmc_host_clk_release(struct mmc_host *host); unsigned int mmc_host_clk_rate(struct mmc_host *host); #else -static inline void mmc_host_clk_ungate(struct mmc_host *host) +static inline void mmc_host_clk_hold(struct mmc_host *host) { } -static inline void mmc_host_clk_gate(struct mmc_host *host) +static inline void mmc_host_clk_release(struct mmc_host *host) { } diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index 633975ff2bb..0370e03e314 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -469,56 +469,75 @@ static int sd_select_driver_type(struct mmc_card *card, u8 *status) return 0; } -static int sd_set_bus_speed_mode(struct mmc_card *card, u8 *status) +static void sd_update_bus_speed_mode(struct mmc_card *card) { - unsigned int bus_speed = 0, timing = 0; - int err; - /* * If the host doesn't support any of the UHS-I modes, fallback on * default speed. */ if (!(card->host->caps & (MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | - MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_DDR50))) - return 0; + MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_DDR50))) { + card->sd_bus_speed = 0; + return; + } if ((card->host->caps & MMC_CAP_UHS_SDR104) && (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR104)) { - bus_speed = UHS_SDR104_BUS_SPEED; - timing = MMC_TIMING_UHS_SDR104; - card->sw_caps.uhs_max_dtr = UHS_SDR104_MAX_DTR; + card->sd_bus_speed = UHS_SDR104_BUS_SPEED; } else if ((card->host->caps & MMC_CAP_UHS_DDR50) && (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_DDR50)) { - bus_speed = UHS_DDR50_BUS_SPEED; - timing = MMC_TIMING_UHS_DDR50; - card->sw_caps.uhs_max_dtr = UHS_DDR50_MAX_DTR; + card->sd_bus_speed = UHS_DDR50_BUS_SPEED; } else if ((card->host->caps & (MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_SDR50)) && (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR50)) { - bus_speed = UHS_SDR50_BUS_SPEED; - timing = MMC_TIMING_UHS_SDR50; - card->sw_caps.uhs_max_dtr = UHS_SDR50_MAX_DTR; + card->sd_bus_speed = UHS_SDR50_BUS_SPEED; } else if ((card->host->caps & (MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR25)) && (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR25)) { - bus_speed = UHS_SDR25_BUS_SPEED; - timing = MMC_TIMING_UHS_SDR25; - card->sw_caps.uhs_max_dtr = UHS_SDR25_MAX_DTR; + card->sd_bus_speed = UHS_SDR25_BUS_SPEED; } else if ((card->host->caps & (MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR25 | MMC_CAP_UHS_SDR12)) && (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR12)) { - bus_speed = UHS_SDR12_BUS_SPEED; - timing = MMC_TIMING_UHS_SDR12; - card->sw_caps.uhs_max_dtr = UHS_SDR12_MAX_DTR; + card->sd_bus_speed = UHS_SDR12_BUS_SPEED; + } +} + +static int sd_set_bus_speed_mode(struct mmc_card *card, u8 *status) +{ + int err; + unsigned int timing = 0; + + switch (card->sd_bus_speed) { + case UHS_SDR104_BUS_SPEED: + timing = MMC_TIMING_UHS_SDR104; + card->sw_caps.uhs_max_dtr = UHS_SDR104_MAX_DTR; + break; + case UHS_DDR50_BUS_SPEED: + timing = MMC_TIMING_UHS_DDR50; + card->sw_caps.uhs_max_dtr = UHS_DDR50_MAX_DTR; + break; + case UHS_SDR50_BUS_SPEED: + timing = MMC_TIMING_UHS_SDR50; + card->sw_caps.uhs_max_dtr = UHS_SDR50_MAX_DTR; + break; + case UHS_SDR25_BUS_SPEED: + timing = MMC_TIMING_UHS_SDR25; + card->sw_caps.uhs_max_dtr = UHS_SDR25_MAX_DTR; + break; + case UHS_SDR12_BUS_SPEED: + timing = MMC_TIMING_UHS_SDR12; + card->sw_caps.uhs_max_dtr = UHS_SDR12_MAX_DTR; + break; + default: + return 0; } - card->sd_bus_speed = bus_speed; - err = mmc_sd_switch(card, 1, 0, bus_speed, status); + err = mmc_sd_switch(card, 1, 0, card->sd_bus_speed, status); if (err) return err; - if ((status[16] & 0xF) != bus_speed) + if ((status[16] & 0xF) != card->sd_bus_speed) printk(KERN_WARNING "%s: Problem setting bus speed mode!\n", mmc_hostname(card->host)); else { @@ -618,18 +637,24 @@ static int mmc_sd_init_uhs_card(struct mmc_card *card) mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4); } + /* + * Select the bus speed mode depending on host + * and card capability. + */ + sd_update_bus_speed_mode(card); + /* Set the driver strength for the card */ err = sd_select_driver_type(card, status); if (err) goto out; - /* Set bus speed mode of the card */ - err = sd_set_bus_speed_mode(card, status); + /* Set current limit for the card */ + err = sd_set_current_limit(card, status); if (err) goto out; - /* Set current limit for the card */ - err = sd_set_current_limit(card, status); + /* Set bus speed mode of the card */ + err = sd_set_bus_speed_mode(card, status); if (err) goto out; diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index a04f87d7ee3..03cfdab99c8 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -913,9 +913,9 @@ request_done: } static void s3cmci_dma_setup(struct s3cmci_host *host, - enum s3c2410_dmasrc source) + enum dma_data_direction source) { - static enum s3c2410_dmasrc last_source = -1; + static enum dma_data_direction last_source = -1; static int setup_ok; if (last_source == source) @@ -1087,7 +1087,7 @@ static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data) BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR); - s3cmci_dma_setup(host, rw ? S3C2410_DMASRC_MEM : S3C2410_DMASRC_HW); + s3cmci_dma_setup(host, rw ? DMA_TO_DEVICE : DMA_FROM_DEVICE); s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH); dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 0e9780f5a4a..4dc0028086a 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -16,6 +16,7 @@ #include <linux/err.h> #include <linux/clk.h> #include <linux/gpio.h> +#include <linux/module.h> #include <linux/slab.h> #include <linux/mmc/host.h> #include <linux/mmc/mmc.h> diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c index 2bd7bf4fece..fe886d6c474 100644 --- a/drivers/mmc/host/sdhci-s3c.c +++ b/drivers/mmc/host/sdhci-s3c.c @@ -302,6 +302,8 @@ static int sdhci_s3c_platform_8bit_width(struct sdhci_host *host, int width) ctrl &= ~SDHCI_CTRL_8BITBUS; break; default: + ctrl &= ~SDHCI_CTRL_4BITBUS; + ctrl &= ~SDHCI_CTRL_8BITBUS; break; } diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c index 774f6439d7c..0c4a672f5db 100644 --- a/drivers/mmc/host/sh_mobile_sdhi.c +++ b/drivers/mmc/host/sh_mobile_sdhi.c @@ -120,11 +120,11 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev) mmc_data->hclk = clk_get_rate(priv->clk); mmc_data->set_pwr = sh_mobile_sdhi_set_pwr; mmc_data->get_cd = sh_mobile_sdhi_get_cd; - if (mmc_data->flags & TMIO_MMC_HAS_IDLE_WAIT) - mmc_data->write16_hook = sh_mobile_sdhi_write16_hook; mmc_data->capabilities = MMC_CAP_MMC_HIGHSPEED; if (p) { mmc_data->flags = p->tmio_flags; + if (mmc_data->flags & TMIO_MMC_HAS_IDLE_WAIT) + mmc_data->write16_hook = sh_mobile_sdhi_write16_hook; mmc_data->ocr_mask = p->tmio_ocr_mask; mmc_data->capabilities |= p->tmio_caps; diff --git a/drivers/mtd/ubi/debug.h b/drivers/mtd/ubi/debug.h index 65b5b76cc37..64fbb002182 100644 --- a/drivers/mtd/ubi/debug.h +++ b/drivers/mtd/ubi/debug.h @@ -181,7 +181,7 @@ static inline int ubi_dbg_is_erase_failure(const struct ubi_device *ubi) #define ubi_dbg_msg(fmt, ...) do { \ if (0) \ - pr_debug(fmt "\n", ##__VA_ARGS__); \ + printk(KERN_DEBUG fmt "\n", ##__VA_ARGS__); \ } while (0) #define dbg_msg(fmt, ...) ubi_dbg_msg(fmt, ##__VA_ARGS__) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 8d0314dbd94..a44874e24f2 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2535,7 +2535,7 @@ config S6GMAC source "drivers/net/stmmac/Kconfig" config PCH_GBE - tristate "Intel EG20T PCH / OKI SEMICONDUCTOR ML7223 IOH GbE" + tristate "Intel EG20T PCH/OKI SEMICONDUCTOR IOH(ML7223/ML7831) GbE" depends on PCI select MII ---help--- @@ -2548,10 +2548,11 @@ config PCH_GBE This driver enables Gigabit Ethernet function. This driver also can be used for OKI SEMICONDUCTOR IOH(Input/ - Output Hub), ML7223. - ML7223 IOH is for MP(Media Phone) use. - ML7223 is companion chip for Intel Atom E6xx series. - ML7223 is completely compatible for Intel EG20T PCH. + Output Hub), ML7223/ML7831. + ML7223 IOH is for MP(Media Phone) use. ML7831 IOH is for general + purpose use. + ML7223/ML7831 is companion chip for Intel Atom E6xx series. + ML7223/ML7831 is completely compatible for Intel EG20T PCH. config FTGMAC100 tristate "Faraday FTGMAC100 Gigabit Ethernet support" diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c index 52fe21e1e2c..3b1416e3d21 100644 --- a/drivers/net/arm/am79c961a.c +++ b/drivers/net/arm/am79c961a.c @@ -308,8 +308,11 @@ static void am79c961_timer(unsigned long data) struct net_device *dev = (struct net_device *)data; struct dev_priv *priv = netdev_priv(dev); unsigned int lnkstat, carrier; + unsigned long flags; + spin_lock_irqsave(&priv->chip_lock, flags); lnkstat = read_ireg(dev->base_addr, ISALED0) & ISALED0_LNKST; + spin_unlock_irqrestore(&priv->chip_lock, flags); carrier = netif_carrier_ok(dev); if (lnkstat && !carrier) { diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h index c423504a755..e46df5331c5 100644 --- a/drivers/net/bnx2x/bnx2x.h +++ b/drivers/net/bnx2x/bnx2x.h @@ -315,6 +315,14 @@ union db_prod { u32 raw; }; +/* dropless fc FW/HW related params */ +#define BRB_SIZE(bp) (CHIP_IS_E3(bp) ? 1024 : 512) +#define MAX_AGG_QS(bp) (CHIP_IS_E1(bp) ? \ + ETH_MAX_AGGREGATION_QUEUES_E1 :\ + ETH_MAX_AGGREGATION_QUEUES_E1H_E2) +#define FW_DROP_LEVEL(bp) (3 + MAX_SPQ_PENDING + MAX_AGG_QS(bp)) +#define FW_PREFETCH_CNT 16 +#define DROPLESS_FC_HEADROOM 100 /* MC hsi */ #define BCM_PAGE_SHIFT 12 @@ -331,15 +339,35 @@ union db_prod { /* SGE ring related macros */ #define NUM_RX_SGE_PAGES 2 #define RX_SGE_CNT (BCM_PAGE_SIZE / sizeof(struct eth_rx_sge)) -#define MAX_RX_SGE_CNT (RX_SGE_CNT - 2) +#define NEXT_PAGE_SGE_DESC_CNT 2 +#define MAX_RX_SGE_CNT (RX_SGE_CNT - NEXT_PAGE_SGE_DESC_CNT) /* RX_SGE_CNT is promised to be a power of 2 */ #define RX_SGE_MASK (RX_SGE_CNT - 1) #define NUM_RX_SGE (RX_SGE_CNT * NUM_RX_SGE_PAGES) #define MAX_RX_SGE (NUM_RX_SGE - 1) #define NEXT_SGE_IDX(x) ((((x) & RX_SGE_MASK) == \ - (MAX_RX_SGE_CNT - 1)) ? (x) + 3 : (x) + 1) + (MAX_RX_SGE_CNT - 1)) ? \ + (x) + 1 + NEXT_PAGE_SGE_DESC_CNT : \ + (x) + 1) #define RX_SGE(x) ((x) & MAX_RX_SGE) +/* + * Number of required SGEs is the sum of two: + * 1. Number of possible opened aggregations (next packet for + * these aggregations will probably consume SGE immidiatelly) + * 2. Rest of BRB blocks divided by 2 (block will consume new SGE only + * after placement on BD for new TPA aggregation) + * + * Takes into account NEXT_PAGE_SGE_DESC_CNT "next" elements on each page + */ +#define NUM_SGE_REQ (MAX_AGG_QS(bp) + \ + (BRB_SIZE(bp) - MAX_AGG_QS(bp)) / 2) +#define NUM_SGE_PG_REQ ((NUM_SGE_REQ + MAX_RX_SGE_CNT - 1) / \ + MAX_RX_SGE_CNT) +#define SGE_TH_LO(bp) (NUM_SGE_REQ + \ + NUM_SGE_PG_REQ * NEXT_PAGE_SGE_DESC_CNT) +#define SGE_TH_HI(bp) (SGE_TH_LO(bp) + DROPLESS_FC_HEADROOM) + /* Manipulate a bit vector defined as an array of u64 */ /* Number of bits in one sge_mask array element */ @@ -551,24 +579,43 @@ struct bnx2x_fastpath { #define NUM_TX_RINGS 16 #define TX_DESC_CNT (BCM_PAGE_SIZE / sizeof(union eth_tx_bd_types)) -#define MAX_TX_DESC_CNT (TX_DESC_CNT - 1) +#define NEXT_PAGE_TX_DESC_CNT 1 +#define MAX_TX_DESC_CNT (TX_DESC_CNT - NEXT_PAGE_TX_DESC_CNT) #define NUM_TX_BD (TX_DESC_CNT * NUM_TX_RINGS) #define MAX_TX_BD (NUM_TX_BD - 1) #define MAX_TX_AVAIL (MAX_TX_DESC_CNT * NUM_TX_RINGS - 2) #define NEXT_TX_IDX(x) ((((x) & MAX_TX_DESC_CNT) == \ - (MAX_TX_DESC_CNT - 1)) ? (x) + 2 : (x) + 1) + (MAX_TX_DESC_CNT - 1)) ? \ + (x) + 1 + NEXT_PAGE_TX_DESC_CNT : \ + (x) + 1) #define TX_BD(x) ((x) & MAX_TX_BD) #define TX_BD_POFF(x) ((x) & MAX_TX_DESC_CNT) /* The RX BD ring is special, each bd is 8 bytes but the last one is 16 */ #define NUM_RX_RINGS 8 #define RX_DESC_CNT (BCM_PAGE_SIZE / sizeof(struct eth_rx_bd)) -#define MAX_RX_DESC_CNT (RX_DESC_CNT - 2) +#define NEXT_PAGE_RX_DESC_CNT 2 +#define MAX_RX_DESC_CNT (RX_DESC_CNT - NEXT_PAGE_RX_DESC_CNT) #define RX_DESC_MASK (RX_DESC_CNT - 1) #define NUM_RX_BD (RX_DESC_CNT * NUM_RX_RINGS) #define MAX_RX_BD (NUM_RX_BD - 1) #define MAX_RX_AVAIL (MAX_RX_DESC_CNT * NUM_RX_RINGS - 2) -#define MIN_RX_AVAIL 128 + +/* dropless fc calculations for BDs + * + * Number of BDs should as number of buffers in BRB: + * Low threshold takes into account NEXT_PAGE_RX_DESC_CNT + * "next" elements on each page + */ +#define NUM_BD_REQ BRB_SIZE(bp) +#define NUM_BD_PG_REQ ((NUM_BD_REQ + MAX_RX_DESC_CNT - 1) / \ + MAX_RX_DESC_CNT) +#define BD_TH_LO(bp) (NUM_BD_REQ + \ + NUM_BD_PG_REQ * NEXT_PAGE_RX_DESC_CNT + \ + FW_DROP_LEVEL(bp)) +#define BD_TH_HI(bp) (BD_TH_LO(bp) + DROPLESS_FC_HEADROOM) + +#define MIN_RX_AVAIL ((bp)->dropless_fc ? BD_TH_HI(bp) + 128 : 128) #define MIN_RX_SIZE_TPA_HW (CHIP_IS_E1(bp) ? \ ETH_MIN_RX_CQES_WITH_TPA_E1 : \ @@ -579,7 +626,9 @@ struct bnx2x_fastpath { MIN_RX_AVAIL)) #define NEXT_RX_IDX(x) ((((x) & RX_DESC_MASK) == \ - (MAX_RX_DESC_CNT - 1)) ? (x) + 3 : (x) + 1) + (MAX_RX_DESC_CNT - 1)) ? \ + (x) + 1 + NEXT_PAGE_RX_DESC_CNT : \ + (x) + 1) #define RX_BD(x) ((x) & MAX_RX_BD) /* @@ -589,14 +638,31 @@ struct bnx2x_fastpath { #define CQE_BD_REL (sizeof(union eth_rx_cqe) / sizeof(struct eth_rx_bd)) #define NUM_RCQ_RINGS (NUM_RX_RINGS * CQE_BD_REL) #define RCQ_DESC_CNT (BCM_PAGE_SIZE / sizeof(union eth_rx_cqe)) -#define MAX_RCQ_DESC_CNT (RCQ_DESC_CNT - 1) +#define NEXT_PAGE_RCQ_DESC_CNT 1 +#define MAX_RCQ_DESC_CNT (RCQ_DESC_CNT - NEXT_PAGE_RCQ_DESC_CNT) #define NUM_RCQ_BD (RCQ_DESC_CNT * NUM_RCQ_RINGS) #define MAX_RCQ_BD (NUM_RCQ_BD - 1) #define MAX_RCQ_AVAIL (MAX_RCQ_DESC_CNT * NUM_RCQ_RINGS - 2) #define NEXT_RCQ_IDX(x) ((((x) & MAX_RCQ_DESC_CNT) == \ - (MAX_RCQ_DESC_CNT - 1)) ? (x) + 2 : (x) + 1) + (MAX_RCQ_DESC_CNT - 1)) ? \ + (x) + 1 + NEXT_PAGE_RCQ_DESC_CNT : \ + (x) + 1) #define RCQ_BD(x) ((x) & MAX_RCQ_BD) +/* dropless fc calculations for RCQs + * + * Number of RCQs should be as number of buffers in BRB: + * Low threshold takes into account NEXT_PAGE_RCQ_DESC_CNT + * "next" elements on each page + */ +#define NUM_RCQ_REQ BRB_SIZE(bp) +#define NUM_RCQ_PG_REQ ((NUM_BD_REQ + MAX_RCQ_DESC_CNT - 1) / \ + MAX_RCQ_DESC_CNT) +#define RCQ_TH_LO(bp) (NUM_RCQ_REQ + \ + NUM_RCQ_PG_REQ * NEXT_PAGE_RCQ_DESC_CNT + \ + FW_DROP_LEVEL(bp)) +#define RCQ_TH_HI(bp) (RCQ_TH_LO(bp) + DROPLESS_FC_HEADROOM) + /* This is needed for determining of last_max */ #define SUB_S16(a, b) (s16)((s16)(a) - (s16)(b)) @@ -685,24 +751,17 @@ struct bnx2x_fastpath { #define FP_CSB_FUNC_OFF \ offsetof(struct cstorm_status_block_c, func) -#define HC_INDEX_TOE_RX_CQ_CONS 0 /* Formerly Ustorm TOE CQ index */ - /* (HC_INDEX_U_TOE_RX_CQ_CONS) */ -#define HC_INDEX_ETH_RX_CQ_CONS 1 /* Formerly Ustorm ETH CQ index */ - /* (HC_INDEX_U_ETH_RX_CQ_CONS) */ -#define HC_INDEX_ETH_RX_BD_CONS 2 /* Formerly Ustorm ETH BD index */ - /* (HC_INDEX_U_ETH_RX_BD_CONS) */ - -#define HC_INDEX_TOE_TX_CQ_CONS 4 /* Formerly Cstorm TOE CQ index */ - /* (HC_INDEX_C_TOE_TX_CQ_CONS) */ -#define HC_INDEX_ETH_TX_CQ_CONS_COS0 5 /* Formerly Cstorm ETH CQ index */ - /* (HC_INDEX_C_ETH_TX_CQ_CONS) */ -#define HC_INDEX_ETH_TX_CQ_CONS_COS1 6 /* Formerly Cstorm ETH CQ index */ - /* (HC_INDEX_C_ETH_TX_CQ_CONS) */ -#define HC_INDEX_ETH_TX_CQ_CONS_COS2 7 /* Formerly Cstorm ETH CQ index */ - /* (HC_INDEX_C_ETH_TX_CQ_CONS) */ +#define HC_INDEX_ETH_RX_CQ_CONS 1 -#define HC_INDEX_ETH_FIRST_TX_CQ_CONS HC_INDEX_ETH_TX_CQ_CONS_COS0 +#define HC_INDEX_OOO_TX_CQ_CONS 4 +#define HC_INDEX_ETH_TX_CQ_CONS_COS0 5 + +#define HC_INDEX_ETH_TX_CQ_CONS_COS1 6 + +#define HC_INDEX_ETH_TX_CQ_CONS_COS2 7 + +#define HC_INDEX_ETH_FIRST_TX_CQ_CONS HC_INDEX_ETH_TX_CQ_CONS_COS0 #define BNX2X_RX_SB_INDEX \ (&fp->sb_index_values[HC_INDEX_ETH_RX_CQ_CONS]) @@ -1100,11 +1159,12 @@ struct bnx2x { #define BP_PORT(bp) (bp->pfid & 1) #define BP_FUNC(bp) (bp->pfid) #define BP_ABS_FUNC(bp) (bp->pf_num) -#define BP_E1HVN(bp) (bp->pfid >> 1) -#define BP_VN(bp) (BP_E1HVN(bp)) /*remove when approved*/ -#define BP_L_ID(bp) (BP_E1HVN(bp) << 2) -#define BP_FW_MB_IDX(bp) (BP_PORT(bp) +\ - BP_VN(bp) * ((CHIP_IS_E1x(bp) || (CHIP_MODE_IS_4_PORT(bp))) ? 2 : 1)) +#define BP_VN(bp) ((bp)->pfid >> 1) +#define BP_MAX_VN_NUM(bp) (CHIP_MODE_IS_4_PORT(bp) ? 2 : 4) +#define BP_L_ID(bp) (BP_VN(bp) << 2) +#define BP_FW_MB_IDX_VN(bp, vn) (BP_PORT(bp) +\ + (vn) * ((CHIP_IS_E1x(bp) || (CHIP_MODE_IS_4_PORT(bp))) ? 2 : 1)) +#define BP_FW_MB_IDX(bp) BP_FW_MB_IDX_VN(bp, BP_VN(bp)) struct net_device *dev; struct pci_dev *pdev; @@ -1767,7 +1827,7 @@ static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms, #define MAX_DMAE_C_PER_PORT 8 #define INIT_DMAE_C(bp) (BP_PORT(bp) * MAX_DMAE_C_PER_PORT + \ - BP_E1HVN(bp)) + BP_VN(bp)) #define PMF_DMAE_C(bp) (BP_PORT(bp) * MAX_DMAE_C_PER_PORT + \ E1HVN_MAX) @@ -1793,7 +1853,7 @@ static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms, /* must be used on a CID before placing it on a HW ring */ #define HW_CID(bp, x) ((BP_PORT(bp) << 23) | \ - (BP_E1HVN(bp) << BNX2X_SWCID_SHIFT) | \ + (BP_VN(bp) << BNX2X_SWCID_SHIFT) | \ (x)) #define SP_DESC_CNT (BCM_PAGE_SIZE / sizeof(struct eth_spe)) diff --git a/drivers/net/bnx2x/bnx2x_cmn.c b/drivers/net/bnx2x/bnx2x_cmn.c index 37e5790681a..c4cbf973641 100644 --- a/drivers/net/bnx2x/bnx2x_cmn.c +++ b/drivers/net/bnx2x/bnx2x_cmn.c @@ -987,8 +987,6 @@ void __bnx2x_link_report(struct bnx2x *bp) void bnx2x_init_rx_rings(struct bnx2x *bp) { int func = BP_FUNC(bp); - int max_agg_queues = CHIP_IS_E1(bp) ? ETH_MAX_AGGREGATION_QUEUES_E1 : - ETH_MAX_AGGREGATION_QUEUES_E1H_E2; u16 ring_prod; int i, j; @@ -1001,7 +999,7 @@ void bnx2x_init_rx_rings(struct bnx2x *bp) if (!fp->disable_tpa) { /* Fill the per-aggregtion pool */ - for (i = 0; i < max_agg_queues; i++) { + for (i = 0; i < MAX_AGG_QS(bp); i++) { struct bnx2x_agg_info *tpa_info = &fp->tpa_info[i]; struct sw_rx_bd *first_buf = @@ -1041,7 +1039,7 @@ void bnx2x_init_rx_rings(struct bnx2x *bp) bnx2x_free_rx_sge_range(bp, fp, ring_prod); bnx2x_free_tpa_pool(bp, fp, - max_agg_queues); + MAX_AGG_QS(bp)); fp->disable_tpa = 1; ring_prod = 0; break; @@ -1137,9 +1135,7 @@ static void bnx2x_free_rx_skbs(struct bnx2x *bp) bnx2x_free_rx_bds(fp); if (!fp->disable_tpa) - bnx2x_free_tpa_pool(bp, fp, CHIP_IS_E1(bp) ? - ETH_MAX_AGGREGATION_QUEUES_E1 : - ETH_MAX_AGGREGATION_QUEUES_E1H_E2); + bnx2x_free_tpa_pool(bp, fp, MAX_AGG_QS(bp)); } } @@ -3095,15 +3091,20 @@ static int bnx2x_alloc_fp_mem_at(struct bnx2x *bp, int index) struct bnx2x_fastpath *fp = &bp->fp[index]; int ring_size = 0; u8 cos; + int rx_ring_size = 0; /* if rx_ring_size specified - use it */ - int rx_ring_size = bp->rx_ring_size ? bp->rx_ring_size : - MAX_RX_AVAIL/BNX2X_NUM_RX_QUEUES(bp); + if (!bp->rx_ring_size) { - /* allocate at least number of buffers required by FW */ - rx_ring_size = max_t(int, bp->disable_tpa ? MIN_RX_SIZE_NONTPA : - MIN_RX_SIZE_TPA, - rx_ring_size); + rx_ring_size = MAX_RX_AVAIL/BNX2X_NUM_RX_QUEUES(bp); + + /* allocate at least number of buffers required by FW */ + rx_ring_size = max_t(int, bp->disable_tpa ? MIN_RX_SIZE_NONTPA : + MIN_RX_SIZE_TPA, rx_ring_size); + + bp->rx_ring_size = rx_ring_size; + } else + rx_ring_size = bp->rx_ring_size; /* Common */ sb = &bnx2x_fp(bp, index, status_blk); diff --git a/drivers/net/bnx2x/bnx2x_ethtool.c b/drivers/net/bnx2x/bnx2x_ethtool.c index 221863059da..cf3e47914dd 100644 --- a/drivers/net/bnx2x/bnx2x_ethtool.c +++ b/drivers/net/bnx2x/bnx2x_ethtool.c @@ -363,13 +363,50 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) } /* advertise the requested speed and duplex if supported */ - cmd->advertising &= bp->port.supported[cfg_idx]; + if (cmd->advertising & ~(bp->port.supported[cfg_idx])) { + DP(NETIF_MSG_LINK, "Advertisement parameters " + "are not supported\n"); + return -EINVAL; + } bp->link_params.req_line_speed[cfg_idx] = SPEED_AUTO_NEG; - bp->link_params.req_duplex[cfg_idx] = DUPLEX_FULL; - bp->port.advertising[cfg_idx] |= (ADVERTISED_Autoneg | + bp->link_params.req_duplex[cfg_idx] = cmd->duplex; + bp->port.advertising[cfg_idx] = (ADVERTISED_Autoneg | cmd->advertising); + if (cmd->advertising) { + + bp->link_params.speed_cap_mask[cfg_idx] = 0; + if (cmd->advertising & ADVERTISED_10baseT_Half) { + bp->link_params.speed_cap_mask[cfg_idx] |= + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF; + } + if (cmd->advertising & ADVERTISED_10baseT_Full) + bp->link_params.speed_cap_mask[cfg_idx] |= + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL; + if (cmd->advertising & ADVERTISED_100baseT_Full) + bp->link_params.speed_cap_mask[cfg_idx] |= + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL; + + if (cmd->advertising & ADVERTISED_100baseT_Half) { + bp->link_params.speed_cap_mask[cfg_idx] |= + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF; + } + if (cmd->advertising & ADVERTISED_1000baseT_Half) { + bp->link_params.speed_cap_mask[cfg_idx] |= + PORT_HW_CFG_SPEED_CAPABILITY_D0_1G; + } + if (cmd->advertising & (ADVERTISED_1000baseT_Full | + ADVERTISED_1000baseKX_Full)) + bp->link_params.speed_cap_mask[cfg_idx] |= + PORT_HW_CFG_SPEED_CAPABILITY_D0_1G; + + if (cmd->advertising & (ADVERTISED_10000baseT_Full | + ADVERTISED_10000baseKX4_Full | + ADVERTISED_10000baseKR_Full)) + bp->link_params.speed_cap_mask[cfg_idx] |= + PORT_HW_CFG_SPEED_CAPABILITY_D0_10G; + } } else { /* forced speed */ /* advertise the requested speed and duplex if supported */ switch (speed) { @@ -1310,10 +1347,7 @@ static void bnx2x_get_ringparam(struct net_device *dev, if (bp->rx_ring_size) ering->rx_pending = bp->rx_ring_size; else - if (bp->state == BNX2X_STATE_OPEN && bp->num_queues) - ering->rx_pending = MAX_RX_AVAIL/bp->num_queues; - else - ering->rx_pending = MAX_RX_AVAIL; + ering->rx_pending = MAX_RX_AVAIL; ering->rx_mini_pending = 0; ering->rx_jumbo_pending = 0; diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index d45b1555a60..ba15bdc5a1a 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -778,9 +778,9 @@ static int bnx2x_ets_e3b0_set_cos_bw(struct bnx2x *bp, { u32 nig_reg_adress_crd_weight = 0; u32 pbf_reg_adress_crd_weight = 0; - /* Calculate and set BW for this COS*/ - const u32 cos_bw_nig = (bw * min_w_val_nig) / total_bw; - const u32 cos_bw_pbf = (bw * min_w_val_pbf) / total_bw; + /* Calculate and set BW for this COS - use 1 instead of 0 for BW */ + const u32 cos_bw_nig = ((bw ? bw : 1) * min_w_val_nig) / total_bw; + const u32 cos_bw_pbf = ((bw ? bw : 1) * min_w_val_pbf) / total_bw; switch (cos_entry) { case 0: @@ -852,18 +852,12 @@ static int bnx2x_ets_e3b0_get_total_bw( /* Calculate total BW requested */ for (cos_idx = 0; cos_idx < ets_params->num_of_cos; cos_idx++) { if (bnx2x_cos_state_bw == ets_params->cos[cos_idx].state) { - - if (0 == ets_params->cos[cos_idx].params.bw_params.bw) { - DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config BW" - "was set to 0\n"); - return -EINVAL; + *total_bw += + ets_params->cos[cos_idx].params.bw_params.bw; } - *total_bw += - ets_params->cos[cos_idx].params.bw_params.bw; - } } - /*Check taotl BW is valid */ + /* Check total BW is valid */ if ((100 != *total_bw) || (0 == *total_bw)) { if (0 == *total_bw) { DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config toatl BW" @@ -1726,7 +1720,7 @@ static int bnx2x_xmac_enable(struct link_params *params, /* Check loopback mode */ if (lb) - val |= XMAC_CTRL_REG_CORE_LOCAL_LPBK; + val |= XMAC_CTRL_REG_LINE_LOCAL_LPBK; REG_WR(bp, xmac_base + XMAC_REG_CTRL, val); bnx2x_set_xumac_nig(params, ((vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) != 0), 1); @@ -3630,6 +3624,12 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, val16); + /* Advertised and set FEC (Forward Error Correction) */ + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT2, + (MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_ABILITY | + MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_REQ)); + /* Enable CL37 BAM */ if (REG_RD(bp, params->shmem_base + offsetof(struct shmem_region, dev_info. @@ -5924,7 +5924,7 @@ int bnx2x_set_led(struct link_params *params, (tmp | EMAC_LED_OVERRIDE)); /* * return here without enabling traffic - * LED blink andsetting rate in ON mode. + * LED blink and setting rate in ON mode. * In oper mode, enabling LED blink * and setting rate is needed. */ @@ -5936,7 +5936,11 @@ int bnx2x_set_led(struct link_params *params, * This is a work-around for HW issue found when link * is up in CL73 */ - REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 1); + if ((!CHIP_IS_E3(bp)) || + (CHIP_IS_E3(bp) && + mode == LED_MODE_ON)) + REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 1); + if (CHIP_IS_E1x(bp) || CHIP_IS_E2(bp) || (mode == LED_MODE_ON)) @@ -10638,8 +10642,7 @@ static struct bnx2x_phy phy_warpcore = { .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT, .addr = 0xff, .def_md_devad = 0, - .flags = (FLAGS_HW_LOCK_REQUIRED | - FLAGS_TX_ERROR_CHECK), + .flags = FLAGS_HW_LOCK_REQUIRED, .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .mdio_ctrl = 0, @@ -10765,8 +10768,7 @@ static struct bnx2x_phy phy_8706 = { .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706, .addr = 0xff, .def_md_devad = 0, - .flags = (FLAGS_INIT_XGXS_FIRST | - FLAGS_TX_ERROR_CHECK), + .flags = FLAGS_INIT_XGXS_FIRST, .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .mdio_ctrl = 0, @@ -10797,8 +10799,7 @@ static struct bnx2x_phy phy_8726 = { .addr = 0xff, .def_md_devad = 0, .flags = (FLAGS_HW_LOCK_REQUIRED | - FLAGS_INIT_XGXS_FIRST | - FLAGS_TX_ERROR_CHECK), + FLAGS_INIT_XGXS_FIRST), .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .mdio_ctrl = 0, @@ -10829,8 +10830,7 @@ static struct bnx2x_phy phy_8727 = { .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, .addr = 0xff, .def_md_devad = 0, - .flags = (FLAGS_FAN_FAILURE_DET_REQ | - FLAGS_TX_ERROR_CHECK), + .flags = FLAGS_FAN_FAILURE_DET_REQ, .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .mdio_ctrl = 0, diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c index f74582a22c6..c027e9341a1 100644 --- a/drivers/net/bnx2x/bnx2x_main.c +++ b/drivers/net/bnx2x/bnx2x_main.c @@ -407,8 +407,8 @@ u32 bnx2x_dmae_opcode(struct bnx2x *bp, u8 src_type, u8 dst_type, opcode |= (DMAE_CMD_SRC_RESET | DMAE_CMD_DST_RESET); opcode |= (BP_PORT(bp) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0); - opcode |= ((BP_E1HVN(bp) << DMAE_CMD_E1HVN_SHIFT) | - (BP_E1HVN(bp) << DMAE_COMMAND_DST_VN_SHIFT)); + opcode |= ((BP_VN(bp) << DMAE_CMD_E1HVN_SHIFT) | + (BP_VN(bp) << DMAE_COMMAND_DST_VN_SHIFT)); opcode |= (DMAE_COM_SET_ERR << DMAE_COMMAND_ERR_POLICY_SHIFT); #ifdef __BIG_ENDIAN @@ -1419,7 +1419,7 @@ static void bnx2x_hc_int_enable(struct bnx2x *bp) if (!CHIP_IS_E1(bp)) { /* init leading/trailing edge */ if (IS_MF(bp)) { - val = (0xee0f | (1 << (BP_E1HVN(bp) + 4))); + val = (0xee0f | (1 << (BP_VN(bp) + 4))); if (bp->port.pmf) /* enable nig and gpio3 attention */ val |= 0x1100; @@ -1471,7 +1471,7 @@ static void bnx2x_igu_int_enable(struct bnx2x *bp) /* init leading/trailing edge */ if (IS_MF(bp)) { - val = (0xee0f | (1 << (BP_E1HVN(bp) + 4))); + val = (0xee0f | (1 << (BP_VN(bp) + 4))); if (bp->port.pmf) /* enable nig and gpio3 attention */ val |= 0x1100; @@ -2287,7 +2287,7 @@ static void bnx2x_calc_vn_weight_sum(struct bnx2x *bp) int vn; bp->vn_weight_sum = 0; - for (vn = VN_0; vn < E1HVN_MAX; vn++) { + for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) { u32 vn_cfg = bp->mf_config[vn]; u32 vn_min_rate = ((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >> FUNC_MF_CFG_MIN_BW_SHIFT) * 100; @@ -2320,12 +2320,18 @@ static void bnx2x_calc_vn_weight_sum(struct bnx2x *bp) CMNG_FLAGS_PER_PORT_FAIRNESS_VN; } +/* returns func by VN for current port */ +static inline int func_by_vn(struct bnx2x *bp, int vn) +{ + return 2 * vn + BP_PORT(bp); +} + static void bnx2x_init_vn_minmax(struct bnx2x *bp, int vn) { struct rate_shaping_vars_per_vn m_rs_vn; struct fairness_vars_per_vn m_fair_vn; u32 vn_cfg = bp->mf_config[vn]; - int func = 2*vn + BP_PORT(bp); + int func = func_by_vn(bp, vn); u16 vn_min_rate, vn_max_rate; int i; @@ -2422,7 +2428,7 @@ void bnx2x_read_mf_cfg(struct bnx2x *bp) * * and there are 2 functions per port */ - for (vn = VN_0; vn < E1HVN_MAX; vn++) { + for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) { int /*abs*/func = n * (2 * vn + BP_PORT(bp)) + BP_PATH(bp); if (func >= E1H_FUNC_MAX) @@ -2454,7 +2460,7 @@ static void bnx2x_cmng_fns_init(struct bnx2x *bp, u8 read_cfg, u8 cmng_type) /* calculate and set min-max rate for each vn */ if (bp->port.pmf) - for (vn = VN_0; vn < E1HVN_MAX; vn++) + for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) bnx2x_init_vn_minmax(bp, vn); /* always enable rate shaping and fairness */ @@ -2473,16 +2479,15 @@ static void bnx2x_cmng_fns_init(struct bnx2x *bp, u8 read_cfg, u8 cmng_type) static inline void bnx2x_link_sync_notify(struct bnx2x *bp) { - int port = BP_PORT(bp); int func; int vn; /* Set the attention towards other drivers on the same port */ - for (vn = VN_0; vn < E1HVN_MAX; vn++) { - if (vn == BP_E1HVN(bp)) + for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) { + if (vn == BP_VN(bp)) continue; - func = ((vn << 1) | port); + func = func_by_vn(bp, vn); REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_0 + (LINK_SYNC_ATTENTION_BIT_FUNC_0 + func)*4, 1); } @@ -2577,7 +2582,7 @@ static void bnx2x_pmf_update(struct bnx2x *bp) bnx2x_dcbx_pmf_update(bp); /* enable nig attention */ - val = (0xff0f | (1 << (BP_E1HVN(bp) + 4))); + val = (0xff0f | (1 << (BP_VN(bp) + 4))); if (bp->common.int_block == INT_BLOCK_HC) { REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, val); REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, val); @@ -2756,8 +2761,14 @@ static void bnx2x_pf_rx_q_prep(struct bnx2x *bp, u16 tpa_agg_size = 0; if (!fp->disable_tpa) { - pause->sge_th_hi = 250; - pause->sge_th_lo = 150; + pause->sge_th_lo = SGE_TH_LO(bp); + pause->sge_th_hi = SGE_TH_HI(bp); + + /* validate SGE ring has enough to cross high threshold */ + WARN_ON(bp->dropless_fc && + pause->sge_th_hi + FW_PREFETCH_CNT > + MAX_RX_SGE_CNT * NUM_RX_SGE_PAGES); + tpa_agg_size = min_t(u32, (min_t(u32, 8, MAX_SKB_FRAGS) * SGE_PAGE_SIZE * PAGES_PER_SGE), 0xffff); @@ -2771,10 +2782,21 @@ static void bnx2x_pf_rx_q_prep(struct bnx2x *bp, /* pause - not for e1 */ if (!CHIP_IS_E1(bp)) { - pause->bd_th_hi = 350; - pause->bd_th_lo = 250; - pause->rcq_th_hi = 350; - pause->rcq_th_lo = 250; + pause->bd_th_lo = BD_TH_LO(bp); + pause->bd_th_hi = BD_TH_HI(bp); + + pause->rcq_th_lo = RCQ_TH_LO(bp); + pause->rcq_th_hi = RCQ_TH_HI(bp); + /* + * validate that rings have enough entries to cross + * high thresholds + */ + WARN_ON(bp->dropless_fc && + pause->bd_th_hi + FW_PREFETCH_CNT > + bp->rx_ring_size); + WARN_ON(bp->dropless_fc && + pause->rcq_th_hi + FW_PREFETCH_CNT > + NUM_RCQ_RINGS * MAX_RCQ_DESC_CNT); pause->pri_map = 1; } @@ -2802,9 +2824,7 @@ static void bnx2x_pf_rx_q_prep(struct bnx2x *bp, * For PF Clients it should be the maximum avaliable number. * VF driver(s) may want to define it to a smaller value. */ - rxq_init->max_tpa_queues = - (CHIP_IS_E1(bp) ? ETH_MAX_AGGREGATION_QUEUES_E1 : - ETH_MAX_AGGREGATION_QUEUES_E1H_E2); + rxq_init->max_tpa_queues = MAX_AGG_QS(bp); rxq_init->cache_line_log = BNX2X_RX_ALIGN_SHIFT; rxq_init->fw_sb_id = fp->fw_sb_id; @@ -4808,6 +4828,37 @@ void bnx2x_setup_ndsb_state_machine(struct hc_status_block_sm *hc_sm, hc_sm->time_to_expire = 0xFFFFFFFF; } + +/* allocates state machine ids. */ +static inline +void bnx2x_map_sb_state_machines(struct hc_index_data *index_data) +{ + /* zero out state machine indices */ + /* rx indices */ + index_data[HC_INDEX_ETH_RX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID; + + /* tx indices */ + index_data[HC_INDEX_OOO_TX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID; + index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags &= ~HC_INDEX_DATA_SM_ID; + index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags &= ~HC_INDEX_DATA_SM_ID; + index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags &= ~HC_INDEX_DATA_SM_ID; + + /* map indices */ + /* rx indices */ + index_data[HC_INDEX_ETH_RX_CQ_CONS].flags |= + SM_RX_ID << HC_INDEX_DATA_SM_ID_SHIFT; + + /* tx indices */ + index_data[HC_INDEX_OOO_TX_CQ_CONS].flags |= + SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT; + index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags |= + SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT; + index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags |= + SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT; + index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags |= + SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT; +} + static void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid, u8 vf_valid, int fw_sb_id, int igu_sb_id) { @@ -4839,6 +4890,7 @@ static void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid, hc_sm_p = sb_data_e2.common.state_machine; sb_data_p = (u32 *)&sb_data_e2; data_size = sizeof(struct hc_status_block_data_e2)/sizeof(u32); + bnx2x_map_sb_state_machines(sb_data_e2.index_data); } else { memset(&sb_data_e1x, 0, sizeof(struct hc_status_block_data_e1x)); @@ -4853,6 +4905,7 @@ static void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid, hc_sm_p = sb_data_e1x.common.state_machine; sb_data_p = (u32 *)&sb_data_e1x; data_size = sizeof(struct hc_status_block_data_e1x)/sizeof(u32); + bnx2x_map_sb_state_machines(sb_data_e1x.index_data); } bnx2x_setup_ndsb_state_machine(&hc_sm_p[SM_RX_ID], @@ -5802,7 +5855,7 @@ static int bnx2x_init_hw_common(struct bnx2x *bp) * take the UNDI lock to protect undi_unload flow from accessing * registers while we're resetting the chip */ - bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET); bnx2x_reset_common(bp); REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff); @@ -5814,7 +5867,7 @@ static int bnx2x_init_hw_common(struct bnx2x *bp) } REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, val); - bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET); bnx2x_init_block(bp, BLOCK_MISC, PHASE_COMMON); @@ -6671,12 +6724,16 @@ static int bnx2x_init_hw_func(struct bnx2x *bp) if (CHIP_MODE_IS_4_PORT(bp)) dsb_idx = BP_FUNC(bp); else - dsb_idx = BP_E1HVN(bp); + dsb_idx = BP_VN(bp); prod_offset = (CHIP_INT_MODE_IS_BC(bp) ? IGU_BC_BASE_DSB_PROD + dsb_idx : IGU_NORM_BASE_DSB_PROD + dsb_idx); + /* + * igu prods come in chunks of E1HVN_MAX (4) - + * does not matters what is the current chip mode + */ for (i = 0; i < (num_segs * E1HVN_MAX); i += E1HVN_MAX) { addr = IGU_REG_PROD_CONS_MEMORY + @@ -7570,7 +7627,7 @@ u32 bnx2x_send_unload_req(struct bnx2x *bp, int unload_mode) u32 val; /* The mac address is written to entries 1-4 to preserve entry 0 which is used by the PMF */ - u8 entry = (BP_E1HVN(bp) + 1)*8; + u8 entry = (BP_VN(bp) + 1)*8; val = (mac_addr[0] << 8) | mac_addr[1]; EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry, val); @@ -8546,10 +8603,12 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp) /* Check if there is any driver already loaded */ val = REG_RD(bp, MISC_REG_UNPREPARED); if (val == 0x1) { - /* Check if it is the UNDI driver + + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET); + /* + * Check if it is the UNDI driver * UNDI driver initializes CID offset for normal bell to 0x7 */ - bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); val = REG_RD(bp, DORQ_REG_NORM_CID_OFST); if (val == 0x7) { u32 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS; @@ -8587,9 +8646,6 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp) bnx2x_fw_command(bp, reset_code, 0); } - /* now it's safe to release the lock */ - bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); - bnx2x_undi_int_disable(bp); port = BP_PORT(bp); @@ -8639,8 +8695,10 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp) bp->fw_seq = (SHMEM_RD(bp, func_mb[bp->pf_num].drv_mb_header) & DRV_MSG_SEQ_NUMBER_MASK); - } else - bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); + } + + /* now it's safe to release the lock */ + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET); } } @@ -8777,13 +8835,13 @@ static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp) static void __devinit bnx2x_get_igu_cam_info(struct bnx2x *bp) { int pfid = BP_FUNC(bp); - int vn = BP_E1HVN(bp); int igu_sb_id; u32 val; u8 fid, igu_sb_cnt = 0; bp->igu_base_sb = 0xff; if (CHIP_INT_MODE_IS_BC(bp)) { + int vn = BP_VN(bp); igu_sb_cnt = bp->igu_sb_cnt; bp->igu_base_sb = (CHIP_MODE_IS_4_PORT(bp) ? pfid : vn) * FP_SB_MAX_E1x; @@ -9416,6 +9474,10 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp) bp->igu_base_sb = 0; } else { bp->common.int_block = INT_BLOCK_IGU; + + /* do not allow device reset during IGU info preocessing */ + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET); + val = REG_RD(bp, IGU_REG_BLOCK_CONFIGURATION); if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) { @@ -9447,6 +9509,7 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp) bnx2x_get_igu_cam_info(bp); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET); } /* @@ -9473,7 +9536,7 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp) bp->mf_ov = 0; bp->mf_mode = 0; - vn = BP_E1HVN(bp); + vn = BP_VN(bp); if (!CHIP_IS_E1(bp) && !BP_NOMCP(bp)) { BNX2X_DEV_INFO("shmem2base 0x%x, size %d, mfcfg offset %d\n", @@ -9593,13 +9656,6 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp) /* port info */ bnx2x_get_port_hwinfo(bp); - if (!BP_NOMCP(bp)) { - bp->fw_seq = - (SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) & - DRV_MSG_SEQ_NUMBER_MASK); - BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq); - } - /* Get MAC addresses */ bnx2x_get_mac_hwinfo(bp); @@ -9765,6 +9821,14 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp) if (!BP_NOMCP(bp)) bnx2x_undi_unload(bp); + /* init fw_seq after undi_unload! */ + if (!BP_NOMCP(bp)) { + bp->fw_seq = + (SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) & + DRV_MSG_SEQ_NUMBER_MASK); + BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq); + } + if (CHIP_REV_IS_FPGA(bp)) dev_err(&bp->pdev->dev, "FPGA detected\n"); @@ -10259,17 +10323,21 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev, /* clean indirect addresses */ pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, PCICFG_VENDOR_ID_OFFSET); - /* Clean the following indirect addresses for all functions since it + /* + * Clean the following indirect addresses for all functions since it * is not used by the driver. */ REG_WR(bp, PXP2_REG_PGL_ADDR_88_F0, 0); REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F0, 0); REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0, 0); REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0, 0); - REG_WR(bp, PXP2_REG_PGL_ADDR_88_F1, 0); - REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F1, 0); - REG_WR(bp, PXP2_REG_PGL_ADDR_90_F1, 0); - REG_WR(bp, PXP2_REG_PGL_ADDR_94_F1, 0); + + if (CHIP_IS_E1x(bp)) { + REG_WR(bp, PXP2_REG_PGL_ADDR_88_F1, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F1, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_90_F1, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_94_F1, 0); + } /* * Enable internal target-read (in case we are probed after PF FLR). diff --git a/drivers/net/bnx2x/bnx2x_reg.h b/drivers/net/bnx2x/bnx2x_reg.h index 40266c14e6d..750e8445dac 100644 --- a/drivers/net/bnx2x/bnx2x_reg.h +++ b/drivers/net/bnx2x/bnx2x_reg.h @@ -5320,7 +5320,7 @@ #define XCM_REG_XX_OVFL_EVNT_ID 0x20058 #define XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_LOCAL_FAULT_STATUS (0x1<<0) #define XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_REMOTE_FAULT_STATUS (0x1<<1) -#define XMAC_CTRL_REG_CORE_LOCAL_LPBK (0x1<<3) +#define XMAC_CTRL_REG_LINE_LOCAL_LPBK (0x1<<2) #define XMAC_CTRL_REG_RX_EN (0x1<<1) #define XMAC_CTRL_REG_SOFT_RESET (0x1<<6) #define XMAC_CTRL_REG_TX_EN (0x1<<0) @@ -5766,7 +5766,7 @@ #define HW_LOCK_RESOURCE_RECOVERY_LEADER_0 8 #define HW_LOCK_RESOURCE_RECOVERY_LEADER_1 9 #define HW_LOCK_RESOURCE_SPIO 2 -#define HW_LOCK_RESOURCE_UNDI 5 +#define HW_LOCK_RESOURCE_RESET 5 #define AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT (0x1<<4) #define AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR (0x1<<5) #define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR (0x1<<18) @@ -6853,6 +6853,9 @@ Theotherbitsarereservedandshouldbezero*/ #define MDIO_WC_REG_IEEE0BLK_AUTONEGNP 0x7 #define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT0 0x10 #define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1 0x11 +#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT2 0x12 +#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_ABILITY 0x4000 +#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_REQ 0x8000 #define MDIO_WC_REG_PMD_IEEE9BLK_TENGBASE_KR_PMD_CONTROL_REGISTER_150 0x96 #define MDIO_WC_REG_XGXSBLK0_XGXSCONTROL 0x8000 #define MDIO_WC_REG_XGXSBLK0_MISCCONTROL1 0x800e diff --git a/drivers/net/bnx2x/bnx2x_stats.c b/drivers/net/bnx2x/bnx2x_stats.c index 771f6803b23..9908f2bbcf7 100644 --- a/drivers/net/bnx2x/bnx2x_stats.c +++ b/drivers/net/bnx2x/bnx2x_stats.c @@ -710,7 +710,8 @@ static int bnx2x_hw_stats_update(struct bnx2x *bp) break; case MAC_TYPE_NONE: /* unreached */ - BNX2X_ERR("stats updated by DMAE but no MAC active\n"); + DP(BNX2X_MSG_STATS, + "stats updated by DMAE but no MAC active\n"); return -1; default: /* unreached */ @@ -1391,7 +1392,7 @@ static void bnx2x_port_stats_base_init(struct bnx2x *bp) static void bnx2x_func_stats_base_init(struct bnx2x *bp) { - int vn, vn_max = IS_MF(bp) ? E1HVN_MAX : E1VN_MAX; + int vn, vn_max = IS_MF(bp) ? BP_MAX_VN_NUM(bp) : E1VN_MAX; u32 func_stx; /* sanity */ @@ -1404,7 +1405,7 @@ static void bnx2x_func_stats_base_init(struct bnx2x *bp) func_stx = bp->func_stx; for (vn = VN_0; vn < vn_max; vn++) { - int mb_idx = CHIP_IS_E1x(bp) ? 2*vn + BP_PORT(bp) : vn; + int mb_idx = BP_FW_MB_IDX_VN(bp, vn); bp->func_stx = SHMEM_RD(bp, func_mb[mb_idx].fw_mb_param); bnx2x_func_stats_init(bp); diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 38a83acd502..43f2ea54108 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3419,9 +3419,27 @@ static int bond_xmit_hash_policy_l2(struct sk_buff *skb, int count) static int bond_open(struct net_device *bond_dev) { struct bonding *bond = netdev_priv(bond_dev); + struct slave *slave; + int i; bond->kill_timers = 0; + /* reset slave->backup and slave->inactive */ + read_lock(&bond->lock); + if (bond->slave_cnt > 0) { + read_lock(&bond->curr_slave_lock); + bond_for_each_slave(bond, slave, i) { + if ((bond->params.mode == BOND_MODE_ACTIVEBACKUP) + && (slave != bond->curr_active_slave)) { + bond_set_slave_inactive_flags(slave); + } else { + bond_set_slave_active_flags(slave); + } + } + read_unlock(&bond->curr_slave_lock); + } + read_unlock(&bond->lock); + INIT_DELAYED_WORK(&bond->mcast_work, bond_resend_igmp_join_requests_delayed); if (bond_is_lb(bond)) { diff --git a/drivers/net/can/sja1000/plx_pci.c b/drivers/net/can/sja1000/plx_pci.c index 231385b8e08..c7f3d4ea116 100644 --- a/drivers/net/can/sja1000/plx_pci.c +++ b/drivers/net/can/sja1000/plx_pci.c @@ -408,7 +408,7 @@ static void plx_pci_del_card(struct pci_dev *pdev) struct sja1000_priv *priv; int i = 0; - for (i = 0; i < card->channels; i++) { + for (i = 0; i < PLX_PCI_MAX_CHAN; i++) { dev = card->net_dev[i]; if (!dev) continue; @@ -536,7 +536,6 @@ static int __devinit plx_pci_add_card(struct pci_dev *pdev, if (err) { dev_err(&pdev->dev, "Registering device failed " "(err=%d)\n", err); - free_sja1000dev(dev); goto failure_cleanup; } @@ -549,6 +548,7 @@ static int __devinit plx_pci_add_card(struct pci_dev *pdev, dev_err(&pdev->dev, "Channel #%d not detected\n", i + 1); free_sja1000dev(dev); + card->net_dev[i] = NULL; } } diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c index f7bbde9eb2c..2adc294f512 100644 --- a/drivers/net/can/ti_hecc.c +++ b/drivers/net/can/ti_hecc.c @@ -46,6 +46,7 @@ #include <linux/skbuff.h> #include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/io.h> #include <linux/can/dev.h> #include <linux/can/error.h> @@ -503,9 +504,9 @@ static netdev_tx_t ti_hecc_xmit(struct sk_buff *skb, struct net_device *ndev) spin_unlock_irqrestore(&priv->mbx_lock, flags); /* Prepare mailbox for transmission */ + data = cf->can_dlc | (get_tx_head_prio(priv) << 8); if (cf->can_id & CAN_RTR_FLAG) /* Remote transmission request */ data |= HECC_CANMCF_RTR; - data |= get_tx_head_prio(priv) << 8; hecc_write_mbx(priv, mbxno, HECC_CANMCF, data); if (cf->can_id & CAN_EFF_FLAG) /* Extended frame format */ @@ -923,6 +924,7 @@ static int ti_hecc_probe(struct platform_device *pdev) priv->can.do_get_state = ti_hecc_get_state; priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES; + spin_lock_init(&priv->mbx_lock); ndev->irq = irq->start; ndev->flags |= IFF_ECHO; platform_set_drvdata(pdev, ndev); diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c index 646c86bcc54..fdb7a175640 100644 --- a/drivers/net/cassini.c +++ b/drivers/net/cassini.c @@ -2452,14 +2452,13 @@ static irqreturn_t cas_interruptN(int irq, void *dev_id) struct net_device *dev = dev_id; struct cas *cp = netdev_priv(dev); unsigned long flags; - int ring; + int ring = (irq == cp->pci_irq_INTC) ? 2 : 3; u32 status = readl(cp->regs + REG_PLUS_INTRN_STATUS(ring)); /* check for shared irq */ if (status == 0) return IRQ_NONE; - ring = (irq == cp->pci_irq_INTC) ? 2 : 3; spin_lock_irqsave(&cp->lock, flags); if (status & INTR_RX_DONE_ALT) { /* handle rx separately */ #ifdef USE_NAPI diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 8545c7aa93e..a5a89ecb6f3 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -4026,6 +4026,12 @@ s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw) checksum += eeprom_data; } +#ifdef CONFIG_PARISC + /* This is a signature and not a checksum on HP c8000 */ + if ((hw->subsystem_vendor_id == 0x103C) && (eeprom_data == 0x16d6)) + return E1000_SUCCESS; + +#endif if (checksum == (u16) EEPROM_SUM) return E1000_SUCCESS; else { diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index 35916f48502..8533ad7f355 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -155,6 +155,9 @@ struct e1000_info; #define HV_M_STATUS_SPEED_1000 0x0200 #define HV_M_STATUS_LINK_UP 0x0040 +#define E1000_ICH_FWSM_PCIM2PCI 0x01000000 /* ME PCIm-to-PCI active */ +#define E1000_ICH_FWSM_PCIM2PCI_COUNT 2000 + /* Time to wait before putting the device into D3 if there's no link (in ms). */ #define LINK_TIMEOUT 100 @@ -454,6 +457,7 @@ struct e1000_info { #define FLAG2_DISABLE_AIM (1 << 8) #define FLAG2_CHECK_PHY_HANG (1 << 9) #define FLAG2_NO_DISABLE_RX (1 << 10) +#define FLAG2_PCIM2PCI_ARBITER_WA (1 << 11) #define E1000_RX_DESC_PS(R, i) \ (&(((union e1000_rx_desc_packet_split *)((R).desc))[i])) diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 4e36978b8fd..54add27c8f7 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -137,8 +137,9 @@ #define HV_PM_CTRL PHY_REG(770, 17) /* PHY Low Power Idle Control */ -#define I82579_LPI_CTRL PHY_REG(772, 20) -#define I82579_LPI_CTRL_ENABLE_MASK 0x6000 +#define I82579_LPI_CTRL PHY_REG(772, 20) +#define I82579_LPI_CTRL_ENABLE_MASK 0x6000 +#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT 0x80 /* EMI Registers */ #define I82579_EMI_ADDR 0x10 @@ -163,6 +164,11 @@ #define HV_KMRN_MODE_CTRL PHY_REG(769, 16) #define HV_KMRN_MDIO_SLOW 0x0400 +/* KMRN FIFO Control and Status */ +#define HV_KMRN_FIFO_CTRLSTA PHY_REG(770, 16) +#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK 0x7000 +#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT 12 + /* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */ /* Offset 04h HSFSTS */ union ich8_hws_flash_status { @@ -657,6 +663,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) struct e1000_mac_info *mac = &hw->mac; s32 ret_val; bool link; + u16 phy_reg; /* * We only want to go out to the PHY registers to see if Auto-Neg @@ -689,16 +696,35 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) mac->get_link_status = false; - if (hw->phy.type == e1000_phy_82578) { - ret_val = e1000_link_stall_workaround_hv(hw); - if (ret_val) - goto out; - } - - if (hw->mac.type == e1000_pch2lan) { + switch (hw->mac.type) { + case e1000_pch2lan: ret_val = e1000_k1_workaround_lv(hw); if (ret_val) goto out; + /* fall-thru */ + case e1000_pchlan: + if (hw->phy.type == e1000_phy_82578) { + ret_val = e1000_link_stall_workaround_hv(hw); + if (ret_val) + goto out; + } + + /* + * Workaround for PCHx parts in half-duplex: + * Set the number of preambles removed from the packet + * when it is passed from the PHY to the MAC to prevent + * the MAC from misinterpreting the packet type. + */ + e1e_rphy(hw, HV_KMRN_FIFO_CTRLSTA, &phy_reg); + phy_reg &= ~HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK; + + if ((er32(STATUS) & E1000_STATUS_FD) != E1000_STATUS_FD) + phy_reg |= (1 << HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT); + + e1e_wphy(hw, HV_KMRN_FIFO_CTRLSTA, phy_reg); + break; + default: + break; } /* @@ -788,6 +814,11 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter) (adapter->hw.phy.type == e1000_phy_igp_3)) adapter->flags |= FLAG_LSC_GIG_SPEED_DROP; + /* Enable workaround for 82579 w/ ME enabled */ + if ((adapter->hw.mac.type == e1000_pch2lan) && + (er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) + adapter->flags2 |= FLAG2_PCIM2PCI_ARBITER_WA; + /* Disable EEE by default until IEEE802.3az spec is finalized */ if (adapter->flags2 & FLAG2_HAS_EEE) adapter->hw.dev_spec.ich8lan.eee_disable = true; @@ -1355,7 +1386,7 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw) return ret_val; /* Preamble tuning for SSC */ - ret_val = e1e_wphy(hw, PHY_REG(770, 16), 0xA204); + ret_val = e1e_wphy(hw, HV_KMRN_FIFO_CTRLSTA, 0xA204); if (ret_val) return ret_val; } @@ -1645,6 +1676,7 @@ static s32 e1000_k1_workaround_lv(struct e1000_hw *hw) s32 ret_val = 0; u16 status_reg = 0; u32 mac_reg; + u16 phy_reg; if (hw->mac.type != e1000_pch2lan) goto out; @@ -1659,12 +1691,19 @@ static s32 e1000_k1_workaround_lv(struct e1000_hw *hw) mac_reg = er32(FEXTNVM4); mac_reg &= ~E1000_FEXTNVM4_BEACON_DURATION_MASK; - if (status_reg & HV_M_STATUS_SPEED_1000) + ret_val = e1e_rphy(hw, I82579_LPI_CTRL, &phy_reg); + if (ret_val) + goto out; + + if (status_reg & HV_M_STATUS_SPEED_1000) { mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_8USEC; - else + phy_reg &= ~I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT; + } else { mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_16USEC; - + phy_reg |= I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT; + } ew32(FEXTNVM4, mac_reg); + ret_val = e1e_wphy(hw, I82579_LPI_CTRL, phy_reg); } out: diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 362f70382cd..2198e615f24 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -519,6 +519,63 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err, } /** + * e1000e_update_tail_wa - helper function for e1000e_update_[rt]dt_wa() + * @hw: pointer to the HW structure + * @tail: address of tail descriptor register + * @i: value to write to tail descriptor register + * + * When updating the tail register, the ME could be accessing Host CSR + * registers at the same time. Normally, this is handled in h/w by an + * arbiter but on some parts there is a bug that acknowledges Host accesses + * later than it should which could result in the descriptor register to + * have an incorrect value. Workaround this by checking the FWSM register + * which has bit 24 set while ME is accessing Host CSR registers, wait + * if it is set and try again a number of times. + **/ +static inline s32 e1000e_update_tail_wa(struct e1000_hw *hw, u8 __iomem * tail, + unsigned int i) +{ + unsigned int j = 0; + + while ((j++ < E1000_ICH_FWSM_PCIM2PCI_COUNT) && + (er32(FWSM) & E1000_ICH_FWSM_PCIM2PCI)) + udelay(50); + + writel(i, tail); + + if ((j == E1000_ICH_FWSM_PCIM2PCI_COUNT) && (i != readl(tail))) + return E1000_ERR_SWFW_SYNC; + + return 0; +} + +static void e1000e_update_rdt_wa(struct e1000_adapter *adapter, unsigned int i) +{ + u8 __iomem *tail = (adapter->hw.hw_addr + adapter->rx_ring->tail); + struct e1000_hw *hw = &adapter->hw; + + if (e1000e_update_tail_wa(hw, tail, i)) { + u32 rctl = er32(RCTL); + ew32(RCTL, rctl & ~E1000_RCTL_EN); + e_err("ME firmware caused invalid RDT - resetting\n"); + schedule_work(&adapter->reset_task); + } +} + +static void e1000e_update_tdt_wa(struct e1000_adapter *adapter, unsigned int i) +{ + u8 __iomem *tail = (adapter->hw.hw_addr + adapter->tx_ring->tail); + struct e1000_hw *hw = &adapter->hw; + + if (e1000e_update_tail_wa(hw, tail, i)) { + u32 tctl = er32(TCTL); + ew32(TCTL, tctl & ~E1000_TCTL_EN); + e_err("ME firmware caused invalid TDT - resetting\n"); + schedule_work(&adapter->reset_task); + } +} + +/** * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended * @adapter: address of board private structure **/ @@ -573,7 +630,10 @@ map_skb: * such as IA-64). */ wmb(); - writel(i, adapter->hw.hw_addr + rx_ring->tail); + if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) + e1000e_update_rdt_wa(adapter, i); + else + writel(i, adapter->hw.hw_addr + rx_ring->tail); } i++; if (i == rx_ring->count) @@ -673,7 +733,11 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, * such as IA-64). */ wmb(); - writel(i << 1, adapter->hw.hw_addr + rx_ring->tail); + if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) + e1000e_update_rdt_wa(adapter, i << 1); + else + writel(i << 1, + adapter->hw.hw_addr + rx_ring->tail); } i++; @@ -756,7 +820,10 @@ check_page: * applicable for weak-ordered memory model archs, * such as IA-64). */ wmb(); - writel(i, adapter->hw.hw_addr + rx_ring->tail); + if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) + e1000e_update_rdt_wa(adapter, i); + else + writel(i, adapter->hw.hw_addr + rx_ring->tail); } } @@ -4689,7 +4756,12 @@ static void e1000_tx_queue(struct e1000_adapter *adapter, wmb(); tx_ring->next_to_use = i; - writel(i, adapter->hw.hw_addr + tx_ring->tail); + + if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) + e1000e_update_tdt_wa(adapter, i); + else + writel(i, adapter->hw.hw_addr + tx_ring->tail); + /* * we need this if more than one processor can write to our tail * at a time, it synchronizes IO on IA64/Altix systems diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index e55df308a3a..6d5fbd4d425 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -5615,7 +5615,8 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i goto out_error; } - nv_vlan_mode(dev, dev->features); + if (id->driver_data & DEV_HAS_VLAN) + nv_vlan_mode(dev, dev->features); netif_carrier_off(dev); diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 2659daad783..31d5c574e5a 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -2710,8 +2710,13 @@ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, /* Tell the skb what kind of packet this is */ skb->protocol = eth_type_trans(skb, dev); - /* Set vlan tag */ - if (fcb->flags & RXFCB_VLN) + /* + * There's need to check for NETIF_F_HW_VLAN_RX here. + * Even if vlan rx accel is disabled, on some chips + * RXFCB_VLN is pseudo randomly set. + */ + if (dev->features & NETIF_F_HW_VLAN_RX && + fcb->flags & RXFCB_VLN) __vlan_hwaccel_put_tag(skb, fcb->vlctl); /* Send the packet up the stack */ diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c index 6e350692d11..0caf3c323ec 100644 --- a/drivers/net/gianfar_ethtool.c +++ b/drivers/net/gianfar_ethtool.c @@ -686,10 +686,21 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u { unsigned int last_rule_idx = priv->cur_filer_idx; unsigned int cmp_rqfpr; - unsigned int local_rqfpr[MAX_FILER_IDX + 1]; - unsigned int local_rqfcr[MAX_FILER_IDX + 1]; + unsigned int *local_rqfpr; + unsigned int *local_rqfcr; int i = 0x0, k = 0x0; int j = MAX_FILER_IDX, l = 0x0; + int ret = 1; + + local_rqfpr = kmalloc(sizeof(unsigned int) * (MAX_FILER_IDX + 1), + GFP_KERNEL); + local_rqfcr = kmalloc(sizeof(unsigned int) * (MAX_FILER_IDX + 1), + GFP_KERNEL); + if (!local_rqfpr || !local_rqfcr) { + pr_err("Out of memory\n"); + ret = 0; + goto err; + } switch (class) { case TCP_V4_FLOW: @@ -706,7 +717,8 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u break; default: pr_err("Right now this class is not supported\n"); - return 0; + ret = 0; + goto err; } for (i = 0; i < MAX_FILER_IDX + 1; i++) { @@ -721,7 +733,8 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u if (i == MAX_FILER_IDX + 1) { pr_err("No parse rule found, can't create hash rules\n"); - return 0; + ret = 0; + goto err; } /* If a match was found, then it begins the starting of a cluster rule @@ -765,7 +778,10 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u priv->cur_filer_idx = priv->cur_filer_idx - 1; } - return 1; +err: + kfree(local_rqfcr); + kfree(local_rqfpr); + return ret; } static int gfar_set_hash_opts(struct gfar_private *priv, struct ethtool_rxnfc *cmd) @@ -1653,10 +1669,10 @@ static int gfar_get_cls_all(struct gfar_private *priv, u32 i = 0; list_for_each_entry(comp, &priv->rx_list.list, list) { - if (i <= cmd->rule_cnt) { - rule_locs[i] = comp->fs.location; - i++; - } + if (i == cmd->rule_cnt) + return -EMSGSIZE; + rule_locs[i] = comp->fs.location; + i++; } cmd->data = MAX_FILER_IDX; diff --git a/drivers/net/greth.c b/drivers/net/greth.c index 16ce45c1193..52a39000c42 100644 --- a/drivers/net/greth.c +++ b/drivers/net/greth.c @@ -428,6 +428,7 @@ greth_start_xmit(struct sk_buff *skb, struct net_device *dev) dma_sync_single_for_device(greth->dev, dma_addr, skb->len, DMA_TO_DEVICE); status = GRETH_BD_EN | GRETH_BD_IE | (skb->len & GRETH_BD_LEN); + greth->tx_bufs_length[greth->tx_next] = skb->len & GRETH_BD_LEN; /* Wrap around descriptor ring */ if (greth->tx_next == GRETH_TXBD_NUM_MASK) { @@ -490,7 +491,8 @@ greth_start_xmit_gbit(struct sk_buff *skb, struct net_device *dev) if (nr_frags != 0) status = GRETH_TXBD_MORE; - status |= GRETH_TXBD_CSALL; + if (skb->ip_summed == CHECKSUM_PARTIAL) + status |= GRETH_TXBD_CSALL; status |= skb_headlen(skb) & GRETH_BD_LEN; if (greth->tx_next == GRETH_TXBD_NUM_MASK) status |= GRETH_BD_WR; @@ -513,7 +515,9 @@ greth_start_xmit_gbit(struct sk_buff *skb, struct net_device *dev) greth->tx_skbuff[curr_tx] = NULL; bdp = greth->tx_bd_base + curr_tx; - status = GRETH_TXBD_CSALL | GRETH_BD_EN; + status = GRETH_BD_EN; + if (skb->ip_summed == CHECKSUM_PARTIAL) + status |= GRETH_TXBD_CSALL; status |= frag->size & GRETH_BD_LEN; /* Wrap around descriptor ring */ @@ -641,6 +645,7 @@ static void greth_clean_tx(struct net_device *dev) dev->stats.tx_fifo_errors++; } dev->stats.tx_packets++; + dev->stats.tx_bytes += greth->tx_bufs_length[greth->tx_last]; greth->tx_last = NEXT_TX(greth->tx_last); greth->tx_free++; } @@ -695,6 +700,7 @@ static void greth_clean_tx_gbit(struct net_device *dev) greth->tx_skbuff[greth->tx_last] = NULL; greth_update_tx_stats(dev, stat); + dev->stats.tx_bytes += skb->len; bdp = greth->tx_bd_base + greth->tx_last; @@ -796,6 +802,7 @@ static int greth_rx(struct net_device *dev, int limit) memcpy(skb_put(skb, pkt_len), phys_to_virt(dma_addr), pkt_len); skb->protocol = eth_type_trans(skb, dev); + dev->stats.rx_bytes += pkt_len; dev->stats.rx_packets++; netif_receive_skb(skb); } @@ -910,6 +917,7 @@ static int greth_rx_gbit(struct net_device *dev, int limit) skb->protocol = eth_type_trans(skb, dev); dev->stats.rx_packets++; + dev->stats.rx_bytes += pkt_len; netif_receive_skb(skb); greth->rx_skbuff[greth->rx_cur] = newskb; diff --git a/drivers/net/greth.h b/drivers/net/greth.h index 9a0040dee4d..232a622a85b 100644 --- a/drivers/net/greth.h +++ b/drivers/net/greth.h @@ -103,6 +103,7 @@ struct greth_private { unsigned char *tx_bufs[GRETH_TXBD_NUM]; unsigned char *rx_bufs[GRETH_RXBD_NUM]; + u16 tx_bufs_length[GRETH_TXBD_NUM]; u16 tx_next; u16 tx_last; diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c index ba99af05bf6..8dd5fccef72 100644 --- a/drivers/net/ibmveth.c +++ b/drivers/net/ibmveth.c @@ -395,7 +395,7 @@ static inline struct sk_buff *ibmveth_rxq_get_buffer(struct ibmveth_adapter *ada } /* recycle the current buffer on the rx queue */ -static void ibmveth_rxq_recycle_buffer(struct ibmveth_adapter *adapter) +static int ibmveth_rxq_recycle_buffer(struct ibmveth_adapter *adapter) { u32 q_index = adapter->rx_queue.index; u64 correlator = adapter->rx_queue.queue_addr[q_index].correlator; @@ -403,6 +403,7 @@ static void ibmveth_rxq_recycle_buffer(struct ibmveth_adapter *adapter) unsigned int index = correlator & 0xffffffffUL; union ibmveth_buf_desc desc; unsigned long lpar_rc; + int ret = 1; BUG_ON(pool >= IBMVETH_NUM_BUFF_POOLS); BUG_ON(index >= adapter->rx_buff_pool[pool].size); @@ -410,7 +411,7 @@ static void ibmveth_rxq_recycle_buffer(struct ibmveth_adapter *adapter) if (!adapter->rx_buff_pool[pool].active) { ibmveth_rxq_harvest_buffer(adapter); ibmveth_free_buffer_pool(adapter, &adapter->rx_buff_pool[pool]); - return; + goto out; } desc.fields.flags_len = IBMVETH_BUF_VALID | @@ -423,12 +424,16 @@ static void ibmveth_rxq_recycle_buffer(struct ibmveth_adapter *adapter) netdev_dbg(adapter->netdev, "h_add_logical_lan_buffer failed " "during recycle rc=%ld", lpar_rc); ibmveth_remove_buffer_from_pool(adapter, adapter->rx_queue.queue_addr[adapter->rx_queue.index].correlator); + ret = 0; } if (++adapter->rx_queue.index == adapter->rx_queue.num_slots) { adapter->rx_queue.index = 0; adapter->rx_queue.toggle = !adapter->rx_queue.toggle; } + +out: + return ret; } static void ibmveth_rxq_harvest_buffer(struct ibmveth_adapter *adapter) @@ -752,7 +757,7 @@ static int ibmveth_set_csum_offload(struct net_device *dev, u32 data) struct ibmveth_adapter *adapter = netdev_priv(dev); unsigned long set_attr, clr_attr, ret_attr; unsigned long set_attr6, clr_attr6; - long ret, ret6; + long ret, ret4, ret6; int rc1 = 0, rc2 = 0; int restart = 0; @@ -765,6 +770,8 @@ static int ibmveth_set_csum_offload(struct net_device *dev, u32 data) set_attr = 0; clr_attr = 0; + set_attr6 = 0; + clr_attr6 = 0; if (data) { set_attr = IBMVETH_ILLAN_IPV4_TCP_CSUM; @@ -779,16 +786,20 @@ static int ibmveth_set_csum_offload(struct net_device *dev, u32 data) if (ret == H_SUCCESS && !(ret_attr & IBMVETH_ILLAN_ACTIVE_TRUNK) && !(ret_attr & IBMVETH_ILLAN_TRUNK_PRI_MASK) && (ret_attr & IBMVETH_ILLAN_PADDED_PKT_CSUM)) { - ret = h_illan_attributes(adapter->vdev->unit_address, clr_attr, + ret4 = h_illan_attributes(adapter->vdev->unit_address, clr_attr, set_attr, &ret_attr); - if (ret != H_SUCCESS) { + if (ret4 != H_SUCCESS) { netdev_err(dev, "unable to change IPv4 checksum " "offload settings. %d rc=%ld\n", - data, ret); + data, ret4); + + h_illan_attributes(adapter->vdev->unit_address, + set_attr, clr_attr, &ret_attr); + + if (data == 1) + dev->features &= ~NETIF_F_IP_CSUM; - ret = h_illan_attributes(adapter->vdev->unit_address, - set_attr, clr_attr, &ret_attr); } else { adapter->fw_ipv4_csum_support = data; } @@ -799,15 +810,18 @@ static int ibmveth_set_csum_offload(struct net_device *dev, u32 data) if (ret6 != H_SUCCESS) { netdev_err(dev, "unable to change IPv6 checksum " "offload settings. %d rc=%ld\n", - data, ret); + data, ret6); + + h_illan_attributes(adapter->vdev->unit_address, + set_attr6, clr_attr6, &ret_attr); + + if (data == 1) + dev->features &= ~NETIF_F_IPV6_CSUM; - ret = h_illan_attributes(adapter->vdev->unit_address, - set_attr6, clr_attr6, - &ret_attr); } else adapter->fw_ipv6_csum_support = data; - if (ret != H_SUCCESS || ret6 != H_SUCCESS) + if (ret4 == H_SUCCESS || ret6 == H_SUCCESS) adapter->rx_csum = data; else rc1 = -EIO; @@ -925,6 +939,7 @@ static netdev_tx_t ibmveth_start_xmit(struct sk_buff *skb, union ibmveth_buf_desc descs[6]; int last, i; int force_bounce = 0; + dma_addr_t dma_addr; /* * veth handles a maximum of 6 segments including the header, so @@ -989,17 +1004,16 @@ retry_bounce: } /* Map the header */ - descs[0].fields.address = dma_map_single(&adapter->vdev->dev, skb->data, - skb_headlen(skb), - DMA_TO_DEVICE); - if (dma_mapping_error(&adapter->vdev->dev, descs[0].fields.address)) + dma_addr = dma_map_single(&adapter->vdev->dev, skb->data, + skb_headlen(skb), DMA_TO_DEVICE); + if (dma_mapping_error(&adapter->vdev->dev, dma_addr)) goto map_failed; descs[0].fields.flags_len = desc_flags | skb_headlen(skb); + descs[0].fields.address = dma_addr; /* Map the frags */ for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { - unsigned long dma_addr; skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; dma_addr = dma_map_page(&adapter->vdev->dev, frag->page, @@ -1021,7 +1035,12 @@ retry_bounce: netdev->stats.tx_bytes += skb->len; } - for (i = 0; i < skb_shinfo(skb)->nr_frags + 1; i++) + dma_unmap_single(&adapter->vdev->dev, + descs[0].fields.address, + descs[0].fields.flags_len & IBMVETH_BUF_LEN_MASK, + DMA_TO_DEVICE); + + for (i = 1; i < skb_shinfo(skb)->nr_frags + 1; i++) dma_unmap_page(&adapter->vdev->dev, descs[i].fields.address, descs[i].fields.flags_len & IBMVETH_BUF_LEN_MASK, DMA_TO_DEVICE); @@ -1084,8 +1103,9 @@ restart_poll: if (rx_flush) ibmveth_flush_buffer(skb->data, length + offset); + if (!ibmveth_rxq_recycle_buffer(adapter)) + kfree_skb(skb); skb = new_skb; - ibmveth_rxq_recycle_buffer(adapter); } else { ibmveth_rxq_harvest_buffer(adapter); skb_reserve(skb, offset); diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index e86297b3273..e1fcc958927 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -1321,8 +1321,8 @@ static void ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector, if (ring_is_rsc_enabled(rx_ring)) pkt_is_rsc = ixgbe_get_rsc_state(rx_desc); - /* if this is a skb from previous receive DMA will be 0 */ - if (rx_buffer_info->dma) { + /* linear means we are building an skb from multiple pages */ + if (!skb_is_nonlinear(skb)) { u16 hlen; if (pkt_is_rsc && !(staterr & IXGBE_RXD_STAT_EOP) && @@ -1459,8 +1459,10 @@ static void ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector, if (ixgbe_rx_is_fcoe(adapter, rx_desc)) { ddp_bytes = ixgbe_fcoe_ddp(adapter, rx_desc, skb, staterr); - if (!ddp_bytes) + if (!ddp_bytes) { + dev_kfree_skb_any(skb); goto next_desc; + } } #endif /* IXGBE_FCOE */ ixgbe_receive_skb(q_vector, skb, staterr, rx_ring, rx_desc); diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c index dfc82720065..ed2a3977c6e 100644 --- a/drivers/net/netconsole.c +++ b/drivers/net/netconsole.c @@ -799,5 +799,11 @@ static void __exit cleanup_netconsole(void) } } -module_init(init_netconsole); +/* + * Use late_initcall to ensure netconsole is + * initialized after network device driver if built-in. + * + * late_initcall() and module_init() are identical if built as module. + */ +late_initcall(init_netconsole); module_exit(cleanup_netconsole); diff --git a/drivers/net/pch_gbe/pch_gbe.h b/drivers/net/pch_gbe/pch_gbe.h index 59fac77d0db..a09a07197eb 100644 --- a/drivers/net/pch_gbe/pch_gbe.h +++ b/drivers/net/pch_gbe/pch_gbe.h @@ -127,8 +127,8 @@ struct pch_gbe_regs { /* Reset */ #define PCH_GBE_ALL_RST 0x80000000 /* All reset */ -#define PCH_GBE_TX_RST 0x40000000 /* TX MAC, TX FIFO, TX DMA reset */ -#define PCH_GBE_RX_RST 0x04000000 /* RX MAC, RX FIFO, RX DMA reset */ +#define PCH_GBE_TX_RST 0x00008000 /* TX MAC, TX FIFO, TX DMA reset */ +#define PCH_GBE_RX_RST 0x00004000 /* RX MAC, RX FIFO, RX DMA reset */ /* TCP/IP Accelerator Control */ #define PCH_GBE_EX_LIST_EN 0x00000008 /* External List Enable */ @@ -276,6 +276,9 @@ struct pch_gbe_regs { #define PCH_GBE_RX_DMA_EN 0x00000002 /* Enables Receive DMA */ #define PCH_GBE_TX_DMA_EN 0x00000001 /* Enables Transmission DMA */ +/* RX DMA STATUS */ +#define PCH_GBE_IDLE_CHECK 0xFFFFFFFE + /* Wake On LAN Status */ #define PCH_GBE_WLS_BR 0x00000008 /* Broadcas Address */ #define PCH_GBE_WLS_MLT 0x00000004 /* Multicast Address */ @@ -471,6 +474,7 @@ struct pch_gbe_tx_desc { struct pch_gbe_buffer { struct sk_buff *skb; dma_addr_t dma; + unsigned char *rx_buffer; unsigned long time_stamp; u16 length; bool mapped; @@ -511,6 +515,9 @@ struct pch_gbe_tx_ring { struct pch_gbe_rx_ring { struct pch_gbe_rx_desc *desc; dma_addr_t dma; + unsigned char *rx_buff_pool; + dma_addr_t rx_buff_pool_logic; + unsigned int rx_buff_pool_size; unsigned int size; unsigned int count; unsigned int next_to_use; @@ -622,6 +629,7 @@ struct pch_gbe_adapter { unsigned long rx_buffer_len; unsigned long tx_queue_len; bool have_msi; + bool rx_stop_flag; }; extern const char pch_driver_version[]; diff --git a/drivers/net/pch_gbe/pch_gbe_main.c b/drivers/net/pch_gbe/pch_gbe_main.c index eac3c5ca973..567ff10889b 100644 --- a/drivers/net/pch_gbe/pch_gbe_main.c +++ b/drivers/net/pch_gbe/pch_gbe_main.c @@ -20,7 +20,6 @@ #include "pch_gbe.h" #include "pch_gbe_api.h" -#include <linux/prefetch.h> #define DRV_VERSION "1.00" const char pch_driver_version[] = DRV_VERSION; @@ -34,11 +33,15 @@ const char pch_driver_version[] = DRV_VERSION; #define PCH_GBE_WATCHDOG_PERIOD (1 * HZ) /* watchdog time */ #define PCH_GBE_COPYBREAK_DEFAULT 256 #define PCH_GBE_PCI_BAR 1 +#define PCH_GBE_RESERVE_MEMORY 0x200000 /* 2MB */ /* Macros for ML7223 */ #define PCI_VENDOR_ID_ROHM 0x10db #define PCI_DEVICE_ID_ROHM_ML7223_GBE 0x8013 +/* Macros for ML7831 */ +#define PCI_DEVICE_ID_ROHM_ML7831_GBE 0x8802 + #define PCH_GBE_TX_WEIGHT 64 #define PCH_GBE_RX_WEIGHT 64 #define PCH_GBE_RX_BUFFER_WRITE 16 @@ -52,6 +55,7 @@ const char pch_driver_version[] = DRV_VERSION; ) /* Ethertype field values */ +#define PCH_GBE_MAX_RX_BUFFER_SIZE 0x2880 #define PCH_GBE_MAX_JUMBO_FRAME_SIZE 10318 #define PCH_GBE_FRAME_SIZE_2048 2048 #define PCH_GBE_FRAME_SIZE_4096 4096 @@ -83,10 +87,12 @@ const char pch_driver_version[] = DRV_VERSION; #define PCH_GBE_INT_ENABLE_MASK ( \ PCH_GBE_INT_RX_DMA_CMPLT | \ PCH_GBE_INT_RX_DSC_EMP | \ + PCH_GBE_INT_RX_FIFO_ERR | \ PCH_GBE_INT_WOL_DET | \ PCH_GBE_INT_TX_CMPLT \ ) +#define PCH_GBE_INT_DISABLE_ALL 0 static unsigned int copybreak __read_mostly = PCH_GBE_COPYBREAK_DEFAULT; @@ -138,6 +144,27 @@ static void pch_gbe_wait_clr_bit(void *reg, u32 bit) if (!tmp) pr_err("Error: busy bit is not cleared\n"); } + +/** + * pch_gbe_wait_clr_bit_irq - Wait to clear a bit for interrupt context + * @reg: Pointer of register + * @busy: Busy bit + */ +static int pch_gbe_wait_clr_bit_irq(void *reg, u32 bit) +{ + u32 tmp; + int ret = -1; + /* wait busy */ + tmp = 20; + while ((ioread32(reg) & bit) && --tmp) + udelay(5); + if (!tmp) + pr_err("Error: busy bit is not cleared\n"); + else + ret = 0; + return ret; +} + /** * pch_gbe_mac_mar_set - Set MAC address register * @hw: Pointer to the HW structure @@ -189,6 +216,17 @@ static void pch_gbe_mac_reset_hw(struct pch_gbe_hw *hw) return; } +static void pch_gbe_mac_reset_rx(struct pch_gbe_hw *hw) +{ + /* Read the MAC address. and store to the private data */ + pch_gbe_mac_read_mac_addr(hw); + iowrite32(PCH_GBE_RX_RST, &hw->reg->RESET); + pch_gbe_wait_clr_bit_irq(&hw->reg->RESET, PCH_GBE_RX_RST); + /* Setup the MAC address */ + pch_gbe_mac_mar_set(hw, hw->mac.addr, 0); + return; +} + /** * pch_gbe_mac_init_rx_addrs - Initialize receive address's * @hw: Pointer to the HW structure @@ -671,13 +709,8 @@ static void pch_gbe_setup_rctl(struct pch_gbe_adapter *adapter) tcpip = ioread32(&hw->reg->TCPIP_ACC); - if (netdev->features & NETIF_F_RXCSUM) { - tcpip &= ~PCH_GBE_RX_TCPIPACC_OFF; - tcpip |= PCH_GBE_RX_TCPIPACC_EN; - } else { - tcpip |= PCH_GBE_RX_TCPIPACC_OFF; - tcpip &= ~PCH_GBE_RX_TCPIPACC_EN; - } + tcpip |= PCH_GBE_RX_TCPIPACC_OFF; + tcpip &= ~PCH_GBE_RX_TCPIPACC_EN; iowrite32(tcpip, &hw->reg->TCPIP_ACC); return; } @@ -717,13 +750,6 @@ static void pch_gbe_configure_rx(struct pch_gbe_adapter *adapter) iowrite32(rdba, &hw->reg->RX_DSC_BASE); iowrite32(rdlen, &hw->reg->RX_DSC_SIZE); iowrite32((rdba + rdlen), &hw->reg->RX_DSC_SW_P); - - /* Enables Receive DMA */ - rxdma = ioread32(&hw->reg->DMA_CTRL); - rxdma |= PCH_GBE_RX_DMA_EN; - iowrite32(rxdma, &hw->reg->DMA_CTRL); - /* Enables Receive */ - iowrite32(PCH_GBE_MRE_MAC_RX_EN, &hw->reg->MAC_RX_EN); } /** @@ -1097,6 +1123,48 @@ void pch_gbe_update_stats(struct pch_gbe_adapter *adapter) spin_unlock_irqrestore(&adapter->stats_lock, flags); } +static void pch_gbe_stop_receive(struct pch_gbe_adapter *adapter) +{ + struct pch_gbe_hw *hw = &adapter->hw; + u32 rxdma; + u16 value; + int ret; + + /* Disable Receive DMA */ + rxdma = ioread32(&hw->reg->DMA_CTRL); + rxdma &= ~PCH_GBE_RX_DMA_EN; + iowrite32(rxdma, &hw->reg->DMA_CTRL); + /* Wait Rx DMA BUS is IDLE */ + ret = pch_gbe_wait_clr_bit_irq(&hw->reg->RX_DMA_ST, PCH_GBE_IDLE_CHECK); + if (ret) { + /* Disable Bus master */ + pci_read_config_word(adapter->pdev, PCI_COMMAND, &value); + value &= ~PCI_COMMAND_MASTER; + pci_write_config_word(adapter->pdev, PCI_COMMAND, value); + /* Stop Receive */ + pch_gbe_mac_reset_rx(hw); + /* Enable Bus master */ + value |= PCI_COMMAND_MASTER; + pci_write_config_word(adapter->pdev, PCI_COMMAND, value); + } else { + /* Stop Receive */ + pch_gbe_mac_reset_rx(hw); + } +} + +static void pch_gbe_start_receive(struct pch_gbe_hw *hw) +{ + u32 rxdma; + + /* Enables Receive DMA */ + rxdma = ioread32(&hw->reg->DMA_CTRL); + rxdma |= PCH_GBE_RX_DMA_EN; + iowrite32(rxdma, &hw->reg->DMA_CTRL); + /* Enables Receive */ + iowrite32(PCH_GBE_MRE_MAC_RX_EN, &hw->reg->MAC_RX_EN); + return; +} + /** * pch_gbe_intr - Interrupt Handler * @irq: Interrupt number @@ -1123,7 +1191,15 @@ static irqreturn_t pch_gbe_intr(int irq, void *data) if (int_st & PCH_GBE_INT_RX_FRAME_ERR) adapter->stats.intr_rx_frame_err_count++; if (int_st & PCH_GBE_INT_RX_FIFO_ERR) - adapter->stats.intr_rx_fifo_err_count++; + if (!adapter->rx_stop_flag) { + adapter->stats.intr_rx_fifo_err_count++; + pr_debug("Rx fifo over run\n"); + adapter->rx_stop_flag = true; + int_en = ioread32(&hw->reg->INT_EN); + iowrite32((int_en & ~PCH_GBE_INT_RX_FIFO_ERR), + &hw->reg->INT_EN); + pch_gbe_stop_receive(adapter); + } if (int_st & PCH_GBE_INT_RX_DMA_ERR) adapter->stats.intr_rx_dma_err_count++; if (int_st & PCH_GBE_INT_TX_FIFO_ERR) @@ -1135,7 +1211,7 @@ static irqreturn_t pch_gbe_intr(int irq, void *data) /* When Rx descriptor is empty */ if ((int_st & PCH_GBE_INT_RX_DSC_EMP)) { adapter->stats.intr_rx_dsc_empty_count++; - pr_err("Rx descriptor is empty\n"); + pr_debug("Rx descriptor is empty\n"); int_en = ioread32(&hw->reg->INT_EN); iowrite32((int_en & ~PCH_GBE_INT_RX_DSC_EMP), &hw->reg->INT_EN); if (hw->mac.tx_fc_enable) { @@ -1185,29 +1261,23 @@ pch_gbe_alloc_rx_buffers(struct pch_gbe_adapter *adapter, unsigned int i; unsigned int bufsz; - bufsz = adapter->rx_buffer_len + PCH_GBE_DMA_ALIGN; + bufsz = adapter->rx_buffer_len + NET_IP_ALIGN; i = rx_ring->next_to_use; while ((cleaned_count--)) { buffer_info = &rx_ring->buffer_info[i]; - skb = buffer_info->skb; - if (skb) { - skb_trim(skb, 0); - } else { - skb = netdev_alloc_skb(netdev, bufsz); - if (unlikely(!skb)) { - /* Better luck next round */ - adapter->stats.rx_alloc_buff_failed++; - break; - } - /* 64byte align */ - skb_reserve(skb, PCH_GBE_DMA_ALIGN); - - buffer_info->skb = skb; - buffer_info->length = adapter->rx_buffer_len; + skb = netdev_alloc_skb(netdev, bufsz); + if (unlikely(!skb)) { + /* Better luck next round */ + adapter->stats.rx_alloc_buff_failed++; + break; } + /* align */ + skb_reserve(skb, NET_IP_ALIGN); + buffer_info->skb = skb; + buffer_info->dma = dma_map_single(&pdev->dev, - skb->data, + buffer_info->rx_buffer, buffer_info->length, DMA_FROM_DEVICE); if (dma_mapping_error(&adapter->pdev->dev, buffer_info->dma)) { @@ -1240,6 +1310,36 @@ pch_gbe_alloc_rx_buffers(struct pch_gbe_adapter *adapter, return; } +static int +pch_gbe_alloc_rx_buffers_pool(struct pch_gbe_adapter *adapter, + struct pch_gbe_rx_ring *rx_ring, int cleaned_count) +{ + struct pci_dev *pdev = adapter->pdev; + struct pch_gbe_buffer *buffer_info; + unsigned int i; + unsigned int bufsz; + unsigned int size; + + bufsz = adapter->rx_buffer_len; + + size = rx_ring->count * bufsz + PCH_GBE_RESERVE_MEMORY; + rx_ring->rx_buff_pool = dma_alloc_coherent(&pdev->dev, size, + &rx_ring->rx_buff_pool_logic, + GFP_KERNEL); + if (!rx_ring->rx_buff_pool) { + pr_err("Unable to allocate memory for the receive poll buffer\n"); + return -ENOMEM; + } + memset(rx_ring->rx_buff_pool, 0, size); + rx_ring->rx_buff_pool_size = size; + for (i = 0; i < rx_ring->count; i++) { + buffer_info = &rx_ring->buffer_info[i]; + buffer_info->rx_buffer = rx_ring->rx_buff_pool + bufsz * i; + buffer_info->length = bufsz; + } + return 0; +} + /** * pch_gbe_alloc_tx_buffers - Allocate transmit buffers * @adapter: Board private structure @@ -1380,7 +1480,7 @@ pch_gbe_clean_rx(struct pch_gbe_adapter *adapter, unsigned int i; unsigned int cleaned_count = 0; bool cleaned = false; - struct sk_buff *skb, *new_skb; + struct sk_buff *skb; u8 dma_status; u16 gbec_status; u32 tcp_ip_status; @@ -1401,13 +1501,12 @@ pch_gbe_clean_rx(struct pch_gbe_adapter *adapter, rx_desc->gbec_status = DSC_INIT16; buffer_info = &rx_ring->buffer_info[i]; skb = buffer_info->skb; + buffer_info->skb = NULL; /* unmap dma */ dma_unmap_single(&pdev->dev, buffer_info->dma, buffer_info->length, DMA_FROM_DEVICE); buffer_info->mapped = false; - /* Prefetch the packet */ - prefetch(skb->data); pr_debug("RxDecNo = 0x%04x Status[DMA:0x%02x GBE:0x%04x " "TCP:0x%08x] BufInf = 0x%p\n", @@ -1427,70 +1526,16 @@ pch_gbe_clean_rx(struct pch_gbe_adapter *adapter, pr_err("Receive CRC Error\n"); } else { /* get receive length */ - /* length convert[-3] */ - length = (rx_desc->rx_words_eob) - 3; - - /* Decide the data conversion method */ - if (!(netdev->features & NETIF_F_RXCSUM)) { - /* [Header:14][payload] */ - if (NET_IP_ALIGN) { - /* Because alignment differs, - * the new_skb is newly allocated, - * and data is copied to new_skb.*/ - new_skb = netdev_alloc_skb(netdev, - length + NET_IP_ALIGN); - if (!new_skb) { - /* dorrop error */ - pr_err("New skb allocation " - "Error\n"); - goto dorrop; - } - skb_reserve(new_skb, NET_IP_ALIGN); - memcpy(new_skb->data, skb->data, - length); - skb = new_skb; - } else { - /* DMA buffer is used as SKB as it is.*/ - buffer_info->skb = NULL; - } - } else { - /* [Header:14][padding:2][payload] */ - /* The length includes padding length */ - length = length - PCH_GBE_DMA_PADDING; - if ((length < copybreak) || - (NET_IP_ALIGN != PCH_GBE_DMA_PADDING)) { - /* Because alignment differs, - * the new_skb is newly allocated, - * and data is copied to new_skb. - * Padding data is deleted - * at the time of a copy.*/ - new_skb = netdev_alloc_skb(netdev, - length + NET_IP_ALIGN); - if (!new_skb) { - /* dorrop error */ - pr_err("New skb allocation " - "Error\n"); - goto dorrop; - } - skb_reserve(new_skb, NET_IP_ALIGN); - memcpy(new_skb->data, skb->data, - ETH_HLEN); - memcpy(&new_skb->data[ETH_HLEN], - &skb->data[ETH_HLEN + - PCH_GBE_DMA_PADDING], - length - ETH_HLEN); - skb = new_skb; - } else { - /* Padding data is deleted - * by moving header data.*/ - memmove(&skb->data[PCH_GBE_DMA_PADDING], - &skb->data[0], ETH_HLEN); - skb_reserve(skb, NET_IP_ALIGN); - buffer_info->skb = NULL; - } - } - /* The length includes FCS length */ - length = length - ETH_FCS_LEN; + /* length convert[-3], length includes FCS length */ + length = (rx_desc->rx_words_eob) - 3 - ETH_FCS_LEN; + if (rx_desc->rx_words_eob & 0x02) + length = length - 4; + /* + * buffer_info->rx_buffer: [Header:14][payload] + * skb->data: [Reserve:2][Header:14][payload] + */ + memcpy(skb->data, buffer_info->rx_buffer, length); + /* update status of driver */ adapter->stats.rx_bytes += length; adapter->stats.rx_packets++; @@ -1509,7 +1554,6 @@ pch_gbe_clean_rx(struct pch_gbe_adapter *adapter, pr_debug("Receive skb->ip_summed: %d length: %d\n", skb->ip_summed, length); } -dorrop: /* return some buffers to hardware, one at a time is too slow */ if (unlikely(cleaned_count >= PCH_GBE_RX_BUFFER_WRITE)) { pch_gbe_alloc_rx_buffers(adapter, rx_ring, @@ -1714,9 +1758,15 @@ int pch_gbe_up(struct pch_gbe_adapter *adapter) pr_err("Error: can't bring device up\n"); return err; } + err = pch_gbe_alloc_rx_buffers_pool(adapter, rx_ring, rx_ring->count); + if (err) { + pr_err("Error: can't bring device up\n"); + return err; + } pch_gbe_alloc_tx_buffers(adapter, tx_ring); pch_gbe_alloc_rx_buffers(adapter, rx_ring, rx_ring->count); adapter->tx_queue_len = netdev->tx_queue_len; + pch_gbe_start_receive(&adapter->hw); mod_timer(&adapter->watchdog_timer, jiffies); @@ -1734,6 +1784,7 @@ int pch_gbe_up(struct pch_gbe_adapter *adapter) void pch_gbe_down(struct pch_gbe_adapter *adapter) { struct net_device *netdev = adapter->netdev; + struct pch_gbe_rx_ring *rx_ring = adapter->rx_ring; /* signal that we're down so the interrupt handler does not * reschedule our watchdog timer */ @@ -1752,6 +1803,12 @@ void pch_gbe_down(struct pch_gbe_adapter *adapter) pch_gbe_reset(adapter); pch_gbe_clean_tx_ring(adapter, adapter->tx_ring); pch_gbe_clean_rx_ring(adapter, adapter->rx_ring); + + pci_free_consistent(adapter->pdev, rx_ring->rx_buff_pool_size, + rx_ring->rx_buff_pool, rx_ring->rx_buff_pool_logic); + rx_ring->rx_buff_pool_logic = 0; + rx_ring->rx_buff_pool_size = 0; + rx_ring->rx_buff_pool = NULL; } /** @@ -2004,6 +2061,8 @@ static int pch_gbe_change_mtu(struct net_device *netdev, int new_mtu) { struct pch_gbe_adapter *adapter = netdev_priv(netdev); int max_frame; + unsigned long old_rx_buffer_len = adapter->rx_buffer_len; + int err; max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) || @@ -2018,14 +2077,24 @@ static int pch_gbe_change_mtu(struct net_device *netdev, int new_mtu) else if (max_frame <= PCH_GBE_FRAME_SIZE_8192) adapter->rx_buffer_len = PCH_GBE_FRAME_SIZE_8192; else - adapter->rx_buffer_len = PCH_GBE_MAX_JUMBO_FRAME_SIZE; - netdev->mtu = new_mtu; - adapter->hw.mac.max_frame_size = max_frame; + adapter->rx_buffer_len = PCH_GBE_MAX_RX_BUFFER_SIZE; - if (netif_running(netdev)) - pch_gbe_reinit_locked(adapter); - else + if (netif_running(netdev)) { + pch_gbe_down(adapter); + err = pch_gbe_up(adapter); + if (err) { + adapter->rx_buffer_len = old_rx_buffer_len; + pch_gbe_up(adapter); + return -ENOMEM; + } else { + netdev->mtu = new_mtu; + adapter->hw.mac.max_frame_size = max_frame; + } + } else { pch_gbe_reset(adapter); + netdev->mtu = new_mtu; + adapter->hw.mac.max_frame_size = max_frame; + } pr_debug("max_frame : %d rx_buffer_len : %d mtu : %d max_frame_size : %d\n", max_frame, (u32) adapter->rx_buffer_len, netdev->mtu, @@ -2103,6 +2172,7 @@ static int pch_gbe_napi_poll(struct napi_struct *napi, int budget) int work_done = 0; bool poll_end_flag = false; bool cleaned = false; + u32 int_en; pr_debug("budget : %d\n", budget); @@ -2110,8 +2180,15 @@ static int pch_gbe_napi_poll(struct napi_struct *napi, int budget) if (!netif_carrier_ok(netdev)) { poll_end_flag = true; } else { - cleaned = pch_gbe_clean_tx(adapter, adapter->tx_ring); pch_gbe_clean_rx(adapter, adapter->rx_ring, &work_done, budget); + if (adapter->rx_stop_flag) { + adapter->rx_stop_flag = false; + pch_gbe_start_receive(&adapter->hw); + int_en = ioread32(&adapter->hw.reg->INT_EN); + iowrite32((int_en | PCH_GBE_INT_RX_FIFO_ERR), + &adapter->hw.reg->INT_EN); + } + cleaned = pch_gbe_clean_tx(adapter, adapter->tx_ring); if (cleaned) work_done = budget; @@ -2452,6 +2529,13 @@ static DEFINE_PCI_DEVICE_TABLE(pch_gbe_pcidev_id) = { .class = (PCI_CLASS_NETWORK_ETHERNET << 8), .class_mask = (0xFFFF00) }, + {.vendor = PCI_VENDOR_ID_ROHM, + .device = PCI_DEVICE_ID_ROHM_ML7831_GBE, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .class = (PCI_CLASS_NETWORK_ETHERNET << 8), + .class_mask = (0xFFFF00) + }, /* required last entry */ {0} }; diff --git a/drivers/net/phy/national.c b/drivers/net/phy/national.c index 0620ba96350..04bb8fcc0cb 100644 --- a/drivers/net/phy/national.c +++ b/drivers/net/phy/national.c @@ -25,8 +25,9 @@ /* DP83865 phy identifier values */ #define DP83865_PHY_ID 0x20005c7a -#define DP83865_INT_MASK_REG 0x15 -#define DP83865_INT_MASK_STATUS 0x14 +#define DP83865_INT_STATUS 0x14 +#define DP83865_INT_MASK 0x15 +#define DP83865_INT_CLEAR 0x17 #define DP83865_INT_REMOTE_FAULT 0x0008 #define DP83865_INT_ANE_COMPLETED 0x0010 @@ -68,21 +69,25 @@ static int ns_config_intr(struct phy_device *phydev) int err; if (phydev->interrupts == PHY_INTERRUPT_ENABLED) - err = phy_write(phydev, DP83865_INT_MASK_REG, + err = phy_write(phydev, DP83865_INT_MASK, DP83865_INT_MASK_DEFAULT); else - err = phy_write(phydev, DP83865_INT_MASK_REG, 0); + err = phy_write(phydev, DP83865_INT_MASK, 0); return err; } static int ns_ack_interrupt(struct phy_device *phydev) { - int ret = phy_read(phydev, DP83865_INT_MASK_STATUS); + int ret = phy_read(phydev, DP83865_INT_STATUS); if (ret < 0) return ret; - return 0; + /* Clear the interrupt status bit by writing a “1” + * to the corresponding bit in INT_CLEAR (2:0 are reserved) */ + ret = phy_write(phydev, DP83865_INT_CLEAR, ret & ~0x7); + + return ret; } static void ns_giga_speed_fallback(struct phy_device *phydev, int mode) diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c index 10e5d985afa..edfa15d2e79 100644 --- a/drivers/net/ppp_generic.c +++ b/drivers/net/ppp_generic.c @@ -1465,7 +1465,12 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb) continue; } - mtu = pch->chan->mtu - hdrlen; + /* + * hdrlen includes the 2-byte PPP protocol field, but the + * MTU counts only the payload excluding the protocol field. + * (RFC1661 Section 2) + */ + mtu = pch->chan->mtu - (hdrlen - 2); if (mtu < 4) mtu = 4; if (flen > mtu) diff --git a/drivers/net/pxa168_eth.c b/drivers/net/pxa168_eth.c index 1a3033d8e7e..d17d0624c5e 100644 --- a/drivers/net/pxa168_eth.c +++ b/drivers/net/pxa168_eth.c @@ -40,6 +40,7 @@ #include <linux/clk.h> #include <linux/phy.h> #include <linux/io.h> +#include <linux/interrupt.h> #include <linux/types.h> #include <asm/pgtable.h> #include <asm/system.h> diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 02339b3352e..c2366701792 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -407,6 +407,7 @@ enum rtl_register_content { RxOK = 0x0001, /* RxStatusDesc */ + RxBOVF = (1 << 24), RxFOVF = (1 << 23), RxRWT = (1 << 22), RxRES = (1 << 21), @@ -682,6 +683,7 @@ struct rtl8169_private { struct mii_if_info mii; struct rtl8169_counters counters; u32 saved_wolopts; + u32 opts1_mask; struct rtl_fw { const struct firmware *fw; @@ -710,6 +712,7 @@ MODULE_FIRMWARE(FIRMWARE_8168D_1); MODULE_FIRMWARE(FIRMWARE_8168D_2); MODULE_FIRMWARE(FIRMWARE_8168E_1); MODULE_FIRMWARE(FIRMWARE_8168E_2); +MODULE_FIRMWARE(FIRMWARE_8168E_3); MODULE_FIRMWARE(FIRMWARE_8105E_1); static int rtl8169_open(struct net_device *dev); @@ -3077,6 +3080,14 @@ static void rtl8169_phy_reset(struct net_device *dev, netif_err(tp, link, dev, "PHY reset failed\n"); } +static bool rtl_tbi_enabled(struct rtl8169_private *tp) +{ + void __iomem *ioaddr = tp->mmio_addr; + + return (tp->mac_version == RTL_GIGA_MAC_VER_01) && + (RTL_R8(PHYstatus) & TBI_Enable); +} + static void rtl8169_init_phy(struct net_device *dev, struct rtl8169_private *tp) { void __iomem *ioaddr = tp->mmio_addr; @@ -3109,7 +3120,7 @@ static void rtl8169_init_phy(struct net_device *dev, struct rtl8169_private *tp) ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full : 0)); - if (RTL_R8(PHYstatus) & TBI_Enable) + if (rtl_tbi_enabled(tp)) netif_info(tp, link, dev, "TBI auto-negotiating\n"); } @@ -3319,9 +3330,16 @@ static void r810x_phy_power_up(struct rtl8169_private *tp) static void r810x_pll_power_down(struct rtl8169_private *tp) { + void __iomem *ioaddr = tp->mmio_addr; + if (__rtl8169_get_wol(tp) & WAKE_ANY) { rtl_writephy(tp, 0x1f, 0x0000); rtl_writephy(tp, MII_BMCR, 0x0000); + + if (tp->mac_version == RTL_GIGA_MAC_VER_29 || + tp->mac_version == RTL_GIGA_MAC_VER_30) + RTL_W32(RxConfig, RTL_R32(RxConfig) | AcceptBroadcast | + AcceptMulticast | AcceptMyPhys); return; } @@ -3417,7 +3435,8 @@ static void r8168_pll_power_down(struct rtl8169_private *tp) rtl_writephy(tp, MII_BMCR, 0x0000); if (tp->mac_version == RTL_GIGA_MAC_VER_32 || - tp->mac_version == RTL_GIGA_MAC_VER_33) + tp->mac_version == RTL_GIGA_MAC_VER_33 || + tp->mac_version == RTL_GIGA_MAC_VER_34) RTL_W32(RxConfig, RTL_R32(RxConfig) | AcceptBroadcast | AcceptMulticast | AcceptMyPhys); return; @@ -3727,8 +3746,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) tp->features |= rtl_try_msi(pdev, ioaddr, cfg); RTL_W8(Cfg9346, Cfg9346_Lock); - if ((tp->mac_version <= RTL_GIGA_MAC_VER_06) && - (RTL_R8(PHYstatus) & TBI_Enable)) { + if (rtl_tbi_enabled(tp)) { tp->set_speed = rtl8169_set_speed_tbi; tp->get_settings = rtl8169_gset_tbi; tp->phy_reset_enable = rtl8169_tbi_reset_enable; @@ -3777,6 +3795,9 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) tp->intr_event = cfg->intr_event; tp->napi_event = cfg->napi_event; + tp->opts1_mask = (tp->mac_version != RTL_GIGA_MAC_VER_01) ? + ~(RxBOVF | RxFOVF) : ~0; + init_timer(&tp->timer); tp->timer.data = (unsigned long) dev; tp->timer.function = rtl8169_phy_timer; @@ -3988,6 +4009,7 @@ static void rtl8169_hw_reset(struct rtl8169_private *tp) while (RTL_R8(TxPoll) & NPQ) udelay(20); } else if (tp->mac_version == RTL_GIGA_MAC_VER_34) { + RTL_W8(ChipCmd, RTL_R8(ChipCmd) | StopReq); while (!(RTL_R32(TxConfig) & TXCFG_EMPTY)) udelay(100); } else { @@ -5314,7 +5336,7 @@ static int rtl8169_rx_interrupt(struct net_device *dev, u32 status; rmb(); - status = le32_to_cpu(desc->opts1); + status = le32_to_cpu(desc->opts1) & tp->opts1_mask; if (status & DescOwn) break; diff --git a/drivers/net/rionet.c b/drivers/net/rionet.c index 86ac38c96bc..3bb13113703 100644 --- a/drivers/net/rionet.c +++ b/drivers/net/rionet.c @@ -80,13 +80,13 @@ static int rionet_capable = 1; */ static struct rio_dev **rionet_active; -#define is_rionet_capable(pef, src_ops, dst_ops) \ - ((pef & RIO_PEF_INB_MBOX) && \ - (pef & RIO_PEF_INB_DOORBELL) && \ +#define is_rionet_capable(src_ops, dst_ops) \ + ((src_ops & RIO_SRC_OPS_DATA_MSG) && \ + (dst_ops & RIO_DST_OPS_DATA_MSG) && \ (src_ops & RIO_SRC_OPS_DOORBELL) && \ (dst_ops & RIO_DST_OPS_DOORBELL)) #define dev_rionet_capable(dev) \ - is_rionet_capable(dev->pef, dev->src_ops, dev->dst_ops) + is_rionet_capable(dev->src_ops, dev->dst_ops) #define RIONET_MAC_MATCH(x) (*(u32 *)x == 0x00010001) #define RIONET_GET_DESTID(x) (*(u16 *)(x + 4)) @@ -282,7 +282,6 @@ static int rionet_open(struct net_device *ndev) { int i, rc = 0; struct rionet_peer *peer, *tmp; - u32 pwdcsr; struct rionet_private *rnet = netdev_priv(ndev); if (netif_msg_ifup(rnet)) @@ -332,13 +331,8 @@ static int rionet_open(struct net_device *ndev) continue; } - /* - * If device has initialized inbound doorbells, - * send a join message - */ - rio_read_config_32(peer->rdev, RIO_WRITE_PORT_CSR, &pwdcsr); - if (pwdcsr & RIO_DOORBELL_AVAIL) - rio_send_doorbell(peer->rdev, RIONET_DOORBELL_JOIN); + /* Send a join message */ + rio_send_doorbell(peer->rdev, RIONET_DOORBELL_JOIN); } out: @@ -492,7 +486,7 @@ static int rionet_setup_netdev(struct rio_mport *mport, struct net_device *ndev) static int rionet_probe(struct rio_dev *rdev, const struct rio_device_id *id) { int rc = -ENODEV; - u32 lpef, lsrc_ops, ldst_ops; + u32 lsrc_ops, ldst_ops; struct rionet_peer *peer; struct net_device *ndev = NULL; @@ -515,12 +509,11 @@ static int rionet_probe(struct rio_dev *rdev, const struct rio_device_id *id) * on later probes */ if (!rionet_check) { - rio_local_read_config_32(rdev->net->hport, RIO_PEF_CAR, &lpef); rio_local_read_config_32(rdev->net->hport, RIO_SRC_OPS_CAR, &lsrc_ops); rio_local_read_config_32(rdev->net->hport, RIO_DST_OPS_CAR, &ldst_ops); - if (!is_rionet_capable(lpef, lsrc_ops, ldst_ops)) { + if (!is_rionet_capable(lsrc_ops, ldst_ops)) { printk(KERN_ERR "%s: local device is not network capable\n", DRV_NAME); diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index faca764aa21..b59abc706d9 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -1050,7 +1050,6 @@ static int efx_init_io(struct efx_nic *efx) { struct pci_dev *pci_dev = efx->pci_dev; dma_addr_t dma_mask = efx->type->max_dma_mask; - bool use_wc; int rc; netif_dbg(efx, probe, efx->net_dev, "initialising I/O\n"); @@ -1101,21 +1100,8 @@ static int efx_init_io(struct efx_nic *efx) rc = -EIO; goto fail3; } - - /* bug22643: If SR-IOV is enabled then tx push over a write combined - * mapping is unsafe. We need to disable write combining in this case. - * MSI is unsupported when SR-IOV is enabled, and the firmware will - * have removed the MSI capability. So write combining is safe if - * there is an MSI capability. - */ - use_wc = (!EFX_WORKAROUND_22643(efx) || - pci_find_capability(pci_dev, PCI_CAP_ID_MSI)); - if (use_wc) - efx->membase = ioremap_wc(efx->membase_phys, - efx->type->mem_map_size); - else - efx->membase = ioremap_nocache(efx->membase_phys, - efx->type->mem_map_size); + efx->membase = ioremap_nocache(efx->membase_phys, + efx->type->mem_map_size); if (!efx->membase) { netif_err(efx, probe, efx->net_dev, "could not map memory BAR at %llx+%x\n", diff --git a/drivers/net/sfc/io.h b/drivers/net/sfc/io.h index cc978803d48..751d1ec112c 100644 --- a/drivers/net/sfc/io.h +++ b/drivers/net/sfc/io.h @@ -103,7 +103,6 @@ static inline void efx_writeo(struct efx_nic *efx, efx_oword_t *value, _efx_writed(efx, value->u32[2], reg + 8); _efx_writed(efx, value->u32[3], reg + 12); #endif - wmb(); mmiowb(); spin_unlock_irqrestore(&efx->biu_lock, flags); } @@ -126,7 +125,6 @@ static inline void efx_sram_writeq(struct efx_nic *efx, void __iomem *membase, __raw_writel((__force u32)value->u32[0], membase + addr); __raw_writel((__force u32)value->u32[1], membase + addr + 4); #endif - wmb(); mmiowb(); spin_unlock_irqrestore(&efx->biu_lock, flags); } @@ -141,7 +139,6 @@ static inline void efx_writed(struct efx_nic *efx, efx_dword_t *value, /* No lock required */ _efx_writed(efx, value->u32[0], reg); - wmb(); } /* Read a 128-bit CSR, locking as appropriate. */ @@ -152,7 +149,6 @@ static inline void efx_reado(struct efx_nic *efx, efx_oword_t *value, spin_lock_irqsave(&efx->biu_lock, flags); value->u32[0] = _efx_readd(efx, reg + 0); - rmb(); value->u32[1] = _efx_readd(efx, reg + 4); value->u32[2] = _efx_readd(efx, reg + 8); value->u32[3] = _efx_readd(efx, reg + 12); @@ -175,7 +171,6 @@ static inline void efx_sram_readq(struct efx_nic *efx, void __iomem *membase, value->u64[0] = (__force __le64)__raw_readq(membase + addr); #else value->u32[0] = (__force __le32)__raw_readl(membase + addr); - rmb(); value->u32[1] = (__force __le32)__raw_readl(membase + addr + 4); #endif spin_unlock_irqrestore(&efx->biu_lock, flags); @@ -249,7 +244,6 @@ static inline void _efx_writeo_page(struct efx_nic *efx, efx_oword_t *value, _efx_writed(efx, value->u32[2], reg + 8); _efx_writed(efx, value->u32[3], reg + 12); #endif - wmb(); } #define efx_writeo_page(efx, value, reg, page) \ _efx_writeo_page(efx, value, \ diff --git a/drivers/net/sfc/mcdi.c b/drivers/net/sfc/mcdi.c index 3dd45ed61f0..81a42539746 100644 --- a/drivers/net/sfc/mcdi.c +++ b/drivers/net/sfc/mcdi.c @@ -50,20 +50,6 @@ static inline struct efx_mcdi_iface *efx_mcdi(struct efx_nic *efx) return &nic_data->mcdi; } -static inline void -efx_mcdi_readd(struct efx_nic *efx, efx_dword_t *value, unsigned reg) -{ - struct siena_nic_data *nic_data = efx->nic_data; - value->u32[0] = (__force __le32)__raw_readl(nic_data->mcdi_smem + reg); -} - -static inline void -efx_mcdi_writed(struct efx_nic *efx, const efx_dword_t *value, unsigned reg) -{ - struct siena_nic_data *nic_data = efx->nic_data; - __raw_writel((__force u32)value->u32[0], nic_data->mcdi_smem + reg); -} - void efx_mcdi_init(struct efx_nic *efx) { struct efx_mcdi_iface *mcdi; @@ -84,8 +70,8 @@ static void efx_mcdi_copyin(struct efx_nic *efx, unsigned cmd, const u8 *inbuf, size_t inlen) { struct efx_mcdi_iface *mcdi = efx_mcdi(efx); - unsigned pdu = MCDI_PDU(efx); - unsigned doorbell = MCDI_DOORBELL(efx); + unsigned pdu = FR_CZ_MC_TREG_SMEM + MCDI_PDU(efx); + unsigned doorbell = FR_CZ_MC_TREG_SMEM + MCDI_DOORBELL(efx); unsigned int i; efx_dword_t hdr; u32 xflags, seqno; @@ -106,28 +92,29 @@ static void efx_mcdi_copyin(struct efx_nic *efx, unsigned cmd, MCDI_HEADER_SEQ, seqno, MCDI_HEADER_XFLAGS, xflags); - efx_mcdi_writed(efx, &hdr, pdu); + efx_writed(efx, &hdr, pdu); for (i = 0; i < inlen; i += 4) - efx_mcdi_writed(efx, (const efx_dword_t *)(inbuf + i), - pdu + 4 + i); + _efx_writed(efx, *((__le32 *)(inbuf + i)), pdu + 4 + i); + + /* Ensure the payload is written out before the header */ + wmb(); /* ring the doorbell with a distinctive value */ - EFX_POPULATE_DWORD_1(hdr, EFX_DWORD_0, 0x45789abc); - efx_mcdi_writed(efx, &hdr, doorbell); + _efx_writed(efx, (__force __le32) 0x45789abc, doorbell); } static void efx_mcdi_copyout(struct efx_nic *efx, u8 *outbuf, size_t outlen) { struct efx_mcdi_iface *mcdi = efx_mcdi(efx); - unsigned int pdu = MCDI_PDU(efx); + unsigned int pdu = FR_CZ_MC_TREG_SMEM + MCDI_PDU(efx); int i; BUG_ON(atomic_read(&mcdi->state) == MCDI_STATE_QUIESCENT); BUG_ON(outlen & 3 || outlen >= 0x100); for (i = 0; i < outlen; i += 4) - efx_mcdi_readd(efx, (efx_dword_t *)(outbuf + i), pdu + 4 + i); + *((__le32 *)(outbuf + i)) = _efx_readd(efx, pdu + 4 + i); } static int efx_mcdi_poll(struct efx_nic *efx) @@ -135,7 +122,7 @@ static int efx_mcdi_poll(struct efx_nic *efx) struct efx_mcdi_iface *mcdi = efx_mcdi(efx); unsigned int time, finish; unsigned int respseq, respcmd, error; - unsigned int pdu = MCDI_PDU(efx); + unsigned int pdu = FR_CZ_MC_TREG_SMEM + MCDI_PDU(efx); unsigned int rc, spins; efx_dword_t reg; @@ -161,7 +148,8 @@ static int efx_mcdi_poll(struct efx_nic *efx) time = get_seconds(); - efx_mcdi_readd(efx, ®, pdu); + rmb(); + efx_readd(efx, ®, pdu); /* All 1's indicates that shared memory is in reset (and is * not a valid header). Wait for it to come out reset before @@ -188,7 +176,7 @@ static int efx_mcdi_poll(struct efx_nic *efx) respseq, mcdi->seqno); rc = EIO; } else if (error) { - efx_mcdi_readd(efx, ®, pdu + 4); + efx_readd(efx, ®, pdu + 4); switch (EFX_DWORD_FIELD(reg, EFX_DWORD_0)) { #define TRANSLATE_ERROR(name) \ case MC_CMD_ERR_ ## name: \ @@ -222,21 +210,21 @@ out: /* Test and clear MC-rebooted flag for this port/function */ int efx_mcdi_poll_reboot(struct efx_nic *efx) { - unsigned int addr = MCDI_REBOOT_FLAG(efx); + unsigned int addr = FR_CZ_MC_TREG_SMEM + MCDI_REBOOT_FLAG(efx); efx_dword_t reg; uint32_t value; if (efx_nic_rev(efx) < EFX_REV_SIENA_A0) return false; - efx_mcdi_readd(efx, ®, addr); + efx_readd(efx, ®, addr); value = EFX_DWORD_FIELD(reg, EFX_DWORD_0); if (value == 0) return 0; EFX_ZERO_DWORD(reg); - efx_mcdi_writed(efx, ®, addr); + efx_writed(efx, ®, addr); if (value == MC_STATUS_DWORD_ASSERT) return -EINTR; diff --git a/drivers/net/sfc/nic.c b/drivers/net/sfc/nic.c index bafa23a6874..3edfbaf5f02 100644 --- a/drivers/net/sfc/nic.c +++ b/drivers/net/sfc/nic.c @@ -1936,13 +1936,6 @@ void efx_nic_get_regs(struct efx_nic *efx, void *buf) size = min_t(size_t, table->step, 16); - if (table->offset >= efx->type->mem_map_size) { - /* No longer mapped; return dummy data */ - memcpy(buf, "\xde\xc0\xad\xde", 4); - buf += table->rows * size; - continue; - } - for (i = 0; i < table->rows; i++) { switch (table->step) { case 4: /* 32-bit register or SRAM */ diff --git a/drivers/net/sfc/nic.h b/drivers/net/sfc/nic.h index 4bd1f2839df..7443f99c977 100644 --- a/drivers/net/sfc/nic.h +++ b/drivers/net/sfc/nic.h @@ -143,12 +143,10 @@ static inline struct falcon_board *falcon_board(struct efx_nic *efx) /** * struct siena_nic_data - Siena NIC state * @mcdi: Management-Controller-to-Driver Interface - * @mcdi_smem: MCDI shared memory mapping. The mapping is always uncacheable. * @wol_filter_id: Wake-on-LAN packet filter id */ struct siena_nic_data { struct efx_mcdi_iface mcdi; - void __iomem *mcdi_smem; int wol_filter_id; }; diff --git a/drivers/net/sfc/siena.c b/drivers/net/sfc/siena.c index 5735e84c69d..2c3bd93fab5 100644 --- a/drivers/net/sfc/siena.c +++ b/drivers/net/sfc/siena.c @@ -250,26 +250,12 @@ static int siena_probe_nic(struct efx_nic *efx) efx_reado(efx, ®, FR_AZ_CS_DEBUG); efx->net_dev->dev_id = EFX_OWORD_FIELD(reg, FRF_CZ_CS_PORT_NUM) - 1; - /* Initialise MCDI */ - nic_data->mcdi_smem = ioremap_nocache(efx->membase_phys + - FR_CZ_MC_TREG_SMEM, - FR_CZ_MC_TREG_SMEM_STEP * - FR_CZ_MC_TREG_SMEM_ROWS); - if (!nic_data->mcdi_smem) { - netif_err(efx, probe, efx->net_dev, - "could not map MCDI at %llx+%x\n", - (unsigned long long)efx->membase_phys + - FR_CZ_MC_TREG_SMEM, - FR_CZ_MC_TREG_SMEM_STEP * FR_CZ_MC_TREG_SMEM_ROWS); - rc = -ENOMEM; - goto fail1; - } efx_mcdi_init(efx); /* Recover from a failed assertion before probing */ rc = efx_mcdi_handle_assertion(efx); if (rc) - goto fail2; + goto fail1; /* Let the BMC know that the driver is now in charge of link and * filter settings. We must do this before we reset the NIC */ @@ -324,7 +310,6 @@ fail4: fail3: efx_mcdi_drv_attach(efx, false, NULL); fail2: - iounmap(nic_data->mcdi_smem); fail1: kfree(efx->nic_data); return rc; @@ -404,8 +389,6 @@ static int siena_init_nic(struct efx_nic *efx) static void siena_remove_nic(struct efx_nic *efx) { - struct siena_nic_data *nic_data = efx->nic_data; - efx_nic_free_buffer(efx, &efx->irq_status); siena_reset_hw(efx, RESET_TYPE_ALL); @@ -415,8 +398,7 @@ static void siena_remove_nic(struct efx_nic *efx) efx_mcdi_drv_attach(efx, false, NULL); /* Tear down the private nic state */ - iounmap(nic_data->mcdi_smem); - kfree(nic_data); + kfree(efx->nic_data); efx->nic_data = NULL; } @@ -656,7 +638,8 @@ const struct efx_nic_type siena_a0_nic_type = { .default_mac_ops = &efx_mcdi_mac_operations, .revision = EFX_REV_SIENA_A0, - .mem_map_size = FR_CZ_MC_TREG_SMEM, /* MC_TREG_SMEM mapped separately */ + .mem_map_size = (FR_CZ_MC_TREG_SMEM + + FR_CZ_MC_TREG_SMEM_STEP * FR_CZ_MC_TREG_SMEM_ROWS), .txd_ptr_tbl_base = FR_BZ_TX_DESC_PTR_TBL, .rxd_ptr_tbl_base = FR_BZ_RX_DESC_PTR_TBL, .buf_tbl_base = FR_BZ_BUF_FULL_TBL, diff --git a/drivers/net/sfc/workarounds.h b/drivers/net/sfc/workarounds.h index 99ff11400ce..e4dd3a7f304 100644 --- a/drivers/net/sfc/workarounds.h +++ b/drivers/net/sfc/workarounds.h @@ -38,8 +38,6 @@ #define EFX_WORKAROUND_15783 EFX_WORKAROUND_ALWAYS /* Legacy interrupt storm when interrupt fifo fills */ #define EFX_WORKAROUND_17213 EFX_WORKAROUND_SIENA -/* Write combining and sriov=enabled are incompatible */ -#define EFX_WORKAROUND_22643 EFX_WORKAROUND_SIENA /* Spurious parity errors in TSORT buffers */ #define EFX_WORKAROUND_5129 EFX_WORKAROUND_FALCON_A diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index ad35c210b83..1c1666e9910 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -21,6 +21,7 @@ */ #include <linux/init.h> +#include <linux/interrupt.h> #include <linux/dma-mapping.h> #include <linux/etherdevice.h> #include <linux/delay.h> @@ -30,6 +31,7 @@ #include <linux/phy.h> #include <linux/cache.h> #include <linux/io.h> +#include <linux/interrupt.h> #include <linux/pm_runtime.h> #include <linux/slab.h> #include <linux/ethtool.h> diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index dc3fbf61910..4a1374df608 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -6234,12 +6234,10 @@ static netdev_tx_t tg3_start_xmit(struct sk_buff *skb, struct net_device *dev) } } -#ifdef BCM_KERNEL_SUPPORTS_8021Q if (vlan_tx_tag_present(skb)) { base_flags |= TXD_FLAG_VLAN; vlan = vlan_tx_tag_get(skb); } -#endif if (tg3_flag(tp, USE_JUMBO_BDFLAG) && !mss && skb->len > VLAN_ETH_FRAME_LEN) diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index a03336e086d..f06fb78383a 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -228,23 +228,40 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx) if (ctx->rx_max != le32_to_cpu(ctx->ncm_parm.dwNtbInMaxSize)) { if (flags & USB_CDC_NCM_NCAP_NTB_INPUT_SIZE) { - struct usb_cdc_ncm_ndp_input_size ndp_in_sz; + struct usb_cdc_ncm_ndp_input_size *ndp_in_sz; + + ndp_in_sz = kzalloc(sizeof(*ndp_in_sz), GFP_KERNEL); + if (!ndp_in_sz) { + err = -ENOMEM; + goto size_err; + } + err = usb_control_msg(ctx->udev, usb_sndctrlpipe(ctx->udev, 0), USB_CDC_SET_NTB_INPUT_SIZE, USB_TYPE_CLASS | USB_DIR_OUT | USB_RECIP_INTERFACE, - 0, iface_no, &ndp_in_sz, 8, 1000); + 0, iface_no, ndp_in_sz, 8, 1000); + kfree(ndp_in_sz); } else { - __le32 dwNtbInMaxSize = cpu_to_le32(ctx->rx_max); + __le32 *dwNtbInMaxSize; + dwNtbInMaxSize = kzalloc(sizeof(*dwNtbInMaxSize), + GFP_KERNEL); + if (!dwNtbInMaxSize) { + err = -ENOMEM; + goto size_err; + } + *dwNtbInMaxSize = cpu_to_le32(ctx->rx_max); + err = usb_control_msg(ctx->udev, usb_sndctrlpipe(ctx->udev, 0), USB_CDC_SET_NTB_INPUT_SIZE, USB_TYPE_CLASS | USB_DIR_OUT | USB_RECIP_INTERFACE, - 0, iface_no, &dwNtbInMaxSize, 4, 1000); + 0, iface_no, dwNtbInMaxSize, 4, 1000); + kfree(dwNtbInMaxSize); } - +size_err: if (err < 0) pr_debug("Setting NTB Input Size failed\n"); } @@ -325,19 +342,29 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx) /* set Max Datagram Size (MTU) */ if (flags & USB_CDC_NCM_NCAP_MAX_DATAGRAM_SIZE) { - __le16 max_datagram_size; + __le16 *max_datagram_size; u16 eth_max_sz = le16_to_cpu(ctx->ether_desc->wMaxSegmentSize); + + max_datagram_size = kzalloc(sizeof(*max_datagram_size), + GFP_KERNEL); + if (!max_datagram_size) { + err = -ENOMEM; + goto max_dgram_err; + } + err = usb_control_msg(ctx->udev, usb_rcvctrlpipe(ctx->udev, 0), USB_CDC_GET_MAX_DATAGRAM_SIZE, USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE, - 0, iface_no, &max_datagram_size, + 0, iface_no, max_datagram_size, 2, 1000); if (err < 0) { pr_debug("GET_MAX_DATAGRAM_SIZE failed, use size=%u\n", CDC_NCM_MIN_DATAGRAM_SIZE); + kfree(max_datagram_size); } else { - ctx->max_datagram_size = le16_to_cpu(max_datagram_size); + ctx->max_datagram_size = + le16_to_cpu(*max_datagram_size); /* Check Eth descriptor value */ if (eth_max_sz < CDC_NCM_MAX_DATAGRAM_SIZE) { if (ctx->max_datagram_size > eth_max_sz) @@ -360,8 +387,10 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx) USB_TYPE_CLASS | USB_DIR_OUT | USB_RECIP_INTERFACE, 0, - iface_no, &max_datagram_size, + iface_no, max_datagram_size, 2, 1000); + kfree(max_datagram_size); +max_dgram_err: if (err < 0) pr_debug("SET_MAX_DATAGRAM_SIZE failed\n"); } diff --git a/drivers/net/usb/ipheth.c b/drivers/net/usb/ipheth.c index 15772b1b6a9..13c1f044b40 100644 --- a/drivers/net/usb/ipheth.c +++ b/drivers/net/usb/ipheth.c @@ -59,6 +59,7 @@ #define USB_PRODUCT_IPHONE_3G 0x1292 #define USB_PRODUCT_IPHONE_3GS 0x1294 #define USB_PRODUCT_IPHONE_4 0x1297 +#define USB_PRODUCT_IPHONE_4_VZW 0x129c #define IPHETH_USBINTF_CLASS 255 #define IPHETH_USBINTF_SUBCLASS 253 @@ -98,6 +99,10 @@ static struct usb_device_id ipheth_table[] = { USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4, IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS, IPHETH_USBINTF_PROTO) }, + { USB_DEVICE_AND_INTERFACE_INFO( + USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4_VZW, + IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS, + IPHETH_USBINTF_PROTO) }, { } }; MODULE_DEVICE_TABLE(usb, ipheth_table); diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index deb1eca13c9..7c5336c5c37 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -515,10 +515,6 @@ static void velocity_init_cam_filter(struct velocity_info *vptr) mac_set_cam_mask(regs, vptr->mCAMmask); /* Enable VCAMs */ - - if (test_bit(0, vptr->active_vlans)) - WORD_REG_BITS_ON(MCFG_RTGOPT, ®s->MCFG); - for_each_set_bit(vid, vptr->active_vlans, VLAN_N_VID) { mac_set_vlan_cam(regs, i, (u8 *) &vid); vptr->vCAMmask[i / 8] |= 0x1 << (i % 8); diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index 1cbacb38965..0959583feb2 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -1929,14 +1929,17 @@ static void vmxnet3_vlan_rx_add_vid(struct net_device *netdev, u16 vid) { struct vmxnet3_adapter *adapter = netdev_priv(netdev); - u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable; - unsigned long flags; - VMXNET3_SET_VFTABLE_ENTRY(vfTable, vid); - spin_lock_irqsave(&adapter->cmd_lock, flags); - VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, - VMXNET3_CMD_UPDATE_VLAN_FILTERS); - spin_unlock_irqrestore(&adapter->cmd_lock, flags); + if (!(netdev->flags & IFF_PROMISC)) { + u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable; + unsigned long flags; + + VMXNET3_SET_VFTABLE_ENTRY(vfTable, vid); + spin_lock_irqsave(&adapter->cmd_lock, flags); + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_UPDATE_VLAN_FILTERS); + spin_unlock_irqrestore(&adapter->cmd_lock, flags); + } set_bit(vid, adapter->active_vlans); } @@ -1946,14 +1949,17 @@ static void vmxnet3_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) { struct vmxnet3_adapter *adapter = netdev_priv(netdev); - u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable; - unsigned long flags; - VMXNET3_CLEAR_VFTABLE_ENTRY(vfTable, vid); - spin_lock_irqsave(&adapter->cmd_lock, flags); - VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, - VMXNET3_CMD_UPDATE_VLAN_FILTERS); - spin_unlock_irqrestore(&adapter->cmd_lock, flags); + if (!(netdev->flags & IFF_PROMISC)) { + u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable; + unsigned long flags; + + VMXNET3_CLEAR_VFTABLE_ENTRY(vfTable, vid); + spin_lock_irqsave(&adapter->cmd_lock, flags); + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_UPDATE_VLAN_FILTERS); + spin_unlock_irqrestore(&adapter->cmd_lock, flags); + } clear_bit(vid, adapter->active_vlans); } diff --git a/drivers/net/wireless/ath/ath9k/ar9002_calib.c b/drivers/net/wireless/ath/ath9k/ar9002_calib.c index 2d4c0910295..2d394af8217 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c @@ -41,7 +41,8 @@ static bool ar9002_hw_is_cal_supported(struct ath_hw *ah, case ADC_DC_CAL: /* Run ADC Gain Cal for non-CCK & non 2GHz-HT20 only */ if (!IS_CHAN_B(chan) && - !(IS_CHAN_2GHZ(chan) && IS_CHAN_HT20(chan))) + !((IS_CHAN_2GHZ(chan) || IS_CHAN_A_FAST_CLOCK(ah, chan)) && + IS_CHAN_HT20(chan))) supported = true; break; } diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index c34bef1bf2b..1b9400371ea 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -69,7 +69,7 @@ static int ar9003_hw_power_interpolate(int32_t x, static const struct ar9300_eeprom ar9300_default = { .eepromVersion = 2, .templateVersion = 2, - .macAddr = {1, 2, 3, 4, 5, 6}, + .macAddr = {0, 2, 3, 4, 5, 6}, .custData = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, .baseEepHeader = { diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index 1baca8e4715..fcafec0605f 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -671,7 +671,7 @@ static int ar9003_hw_process_ini(struct ath_hw *ah, REG_WRITE_ARRAY(&ah->iniModesAdditional, modesIndex, regWrites); - if (AR_SREV_9300(ah)) + if (AR_SREV_9330(ah)) REG_WRITE_ARRAY(&ah->iniModesAdditional, 1, regWrites); if (AR_SREV_9340(ah) && !ah->is_clk_25mhz) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 9098aaad97a..722967b86cf 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -2283,7 +2283,11 @@ static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class) mutex_lock(&sc->mutex); ah->coverage_class = coverage_class; + + ath9k_ps_wakeup(sc); ath9k_hw_init_global_settings(ah); + ath9k_ps_restore(sc); + mutex_unlock(&sc->mutex); } @@ -2299,6 +2303,12 @@ static void ath9k_flush(struct ieee80211_hw *hw, bool drop) mutex_lock(&sc->mutex); cancel_delayed_work_sync(&sc->tx_complete_work); + if (ah->ah_flags & AH_UNPLUGGED) { + ath_dbg(common, ATH_DBG_ANY, "Device has been unplugged!\n"); + mutex_unlock(&sc->mutex); + return; + } + if (sc->sc_flags & SC_OP_INVALID) { ath_dbg(common, ATH_DBG_ANY, "Device not present\n"); mutex_unlock(&sc->mutex); diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c index 0122930b14c..0474e6638d2 100644 --- a/drivers/net/wireless/ath/carl9170/main.c +++ b/drivers/net/wireless/ath/carl9170/main.c @@ -1066,8 +1066,10 @@ static int carl9170_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, * the high througput speed in 802.11n networks. */ - if (!is_main_vif(ar, vif)) + if (!is_main_vif(ar, vif)) { + mutex_lock(&ar->mutex); goto err_softw; + } /* * While the hardware supports *catch-all* key, for offloading diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 26f1ab840cc..e293a7921bf 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -1632,7 +1632,8 @@ static void handle_irq_beacon(struct b43_wldev *dev) u32 cmd, beacon0_valid, beacon1_valid; if (!b43_is_mode(wl, NL80211_IFTYPE_AP) && - !b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT)) + !b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT) && + !b43_is_mode(wl, NL80211_IFTYPE_ADHOC)) return; /* This is the bottom half of the asynchronous beacon update. */ diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index 3774dd03474..ef9ad79d1bf 100644 --- a/drivers/net/wireless/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c @@ -1903,15 +1903,17 @@ static void ipw2100_down(struct ipw2100_priv *priv) static int ipw2100_net_init(struct net_device *dev) { struct ipw2100_priv *priv = libipw_priv(dev); + + return ipw2100_up(priv, 1); +} + +static int ipw2100_wdev_init(struct net_device *dev) +{ + struct ipw2100_priv *priv = libipw_priv(dev); const struct libipw_geo *geo = libipw_get_geo(priv->ieee); struct wireless_dev *wdev = &priv->ieee->wdev; - int ret; int i; - ret = ipw2100_up(priv, 1); - if (ret) - return ret; - memcpy(wdev->wiphy->perm_addr, priv->mac_addr, ETH_ALEN); /* fill-out priv->ieee->bg_band */ @@ -6350,9 +6352,13 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev, "Error calling register_netdev.\n"); goto fail; } + registered = 1; + + err = ipw2100_wdev_init(dev); + if (err) + goto fail; mutex_lock(&priv->action_mutex); - registered = 1; IPW_DEBUG_INFO("%s: Bound to %s\n", dev->name, pci_name(pci_dev)); @@ -6389,7 +6395,8 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev, fail_unlock: mutex_unlock(&priv->action_mutex); - + wiphy_unregister(priv->ieee->wdev.wiphy); + kfree(priv->ieee->bg_band.channels); fail: if (dev) { if (registered) diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index 87813c33bdc..4ffebede5e0 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -11425,16 +11425,23 @@ static void ipw_bg_down(struct work_struct *work) /* Called by register_netdev() */ static int ipw_net_init(struct net_device *dev) { + int rc = 0; + struct ipw_priv *priv = libipw_priv(dev); + + mutex_lock(&priv->mutex); + if (ipw_up(priv)) + rc = -EIO; + mutex_unlock(&priv->mutex); + + return rc; +} + +static int ipw_wdev_init(struct net_device *dev) +{ int i, rc = 0; struct ipw_priv *priv = libipw_priv(dev); const struct libipw_geo *geo = libipw_get_geo(priv->ieee); struct wireless_dev *wdev = &priv->ieee->wdev; - mutex_lock(&priv->mutex); - - if (ipw_up(priv)) { - rc = -EIO; - goto out; - } memcpy(wdev->wiphy->perm_addr, priv->mac_addr, ETH_ALEN); @@ -11519,13 +11526,9 @@ static int ipw_net_init(struct net_device *dev) set_wiphy_dev(wdev->wiphy, &priv->pci_dev->dev); /* With that information in place, we can now register the wiphy... */ - if (wiphy_register(wdev->wiphy)) { + if (wiphy_register(wdev->wiphy)) rc = -EIO; - goto out; - } - out: - mutex_unlock(&priv->mutex); return rc; } @@ -11832,14 +11835,22 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev, goto out_remove_sysfs; } + err = ipw_wdev_init(net_dev); + if (err) { + IPW_ERROR("failed to register wireless device\n"); + goto out_unregister_netdev; + } + #ifdef CONFIG_IPW2200_PROMISCUOUS if (rtap_iface) { err = ipw_prom_alloc(priv); if (err) { IPW_ERROR("Failed to register promiscuous network " "device (error %d).\n", err); - unregister_netdev(priv->net_dev); - goto out_remove_sysfs; + wiphy_unregister(priv->ieee->wdev.wiphy); + kfree(priv->ieee->a_band.channels); + kfree(priv->ieee->bg_band.channels); + goto out_unregister_netdev; } } #endif @@ -11851,6 +11862,8 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev, return 0; + out_unregister_netdev: + unregister_netdev(priv->net_dev); out_remove_sysfs: sysfs_remove_group(&pdev->dev.kobj, &ipw_attribute_group); out_release_irq: diff --git a/drivers/net/wireless/iwlegacy/iwl-3945-rs.c b/drivers/net/wireless/iwlegacy/iwl-3945-rs.c index 977bd2477c6..164bcae821f 100644 --- a/drivers/net/wireless/iwlegacy/iwl-3945-rs.c +++ b/drivers/net/wireless/iwlegacy/iwl-3945-rs.c @@ -822,12 +822,15 @@ static void iwl3945_rs_get_rate(void *priv_r, struct ieee80211_sta *sta, out: - rs_sta->last_txrate_idx = index; - if (sband->band == IEEE80211_BAND_5GHZ) - info->control.rates[0].idx = rs_sta->last_txrate_idx - - IWL_FIRST_OFDM_RATE; - else + if (sband->band == IEEE80211_BAND_5GHZ) { + if (WARN_ON_ONCE(index < IWL_FIRST_OFDM_RATE)) + index = IWL_FIRST_OFDM_RATE; + rs_sta->last_txrate_idx = index; + info->control.rates[0].idx = index - IWL_FIRST_OFDM_RATE; + } else { + rs_sta->last_txrate_idx = index; info->control.rates[0].idx = rs_sta->last_txrate_idx; + } IWL_DEBUG_RATE(priv, "leave: %d\n", index); } diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c b/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c index a895a099d08..56211006a18 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c @@ -167,7 +167,7 @@ static int iwlagn_set_temperature_offset_calib(struct iwl_priv *priv) memset(&cmd, 0, sizeof(cmd)); iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_TEMP_OFFSET_CMD); - memcpy(&cmd.radio_sensor_offset, offset_calib, sizeof(offset_calib)); + memcpy(&cmd.radio_sensor_offset, offset_calib, sizeof(*offset_calib)); if (!(cmd.radio_sensor_offset)) cmd.radio_sensor_offset = DEFAULT_RADIO_SENSOR_OFFSET; diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index b0ae4de7f08..f9c3cd95d61 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -2140,7 +2140,12 @@ static int iwl_mac_setup_register(struct iwl_priv *priv, IEEE80211_HW_SPECTRUM_MGMT | IEEE80211_HW_REPORTS_TX_ACK_STATUS; + /* + * Including the following line will crash some AP's. This + * workaround removes the stimulus which causes the crash until + * the AP software can be fixed. hw->max_tx_aggregation_subframes = LINK_QUAL_AGG_FRAME_LIMIT_DEF; + */ hw->flags |= IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_SUPPORTS_DYNAMIC_PS; diff --git a/drivers/net/wireless/iwlwifi/iwl-pci.c b/drivers/net/wireless/iwlwifi/iwl-pci.c index 69d4ec467dc..2fdbffa079c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-pci.c +++ b/drivers/net/wireless/iwlwifi/iwl-pci.c @@ -478,27 +478,22 @@ out_no_pci: return err; } -static void iwl_pci_down(struct iwl_bus *bus) -{ - struct iwl_pci_bus *pci_bus = (struct iwl_pci_bus *) bus->bus_specific; - - pci_disable_msi(pci_bus->pci_dev); - pci_iounmap(pci_bus->pci_dev, pci_bus->hw_base); - pci_release_regions(pci_bus->pci_dev); - pci_disable_device(pci_bus->pci_dev); - pci_set_drvdata(pci_bus->pci_dev, NULL); - - kfree(bus); -} - static void __devexit iwl_pci_remove(struct pci_dev *pdev) { struct iwl_priv *priv = pci_get_drvdata(pdev); - void *bus_specific = priv->bus->bus_specific; + struct iwl_bus *bus = priv->bus; + struct iwl_pci_bus *pci_bus = IWL_BUS_GET_PCI_BUS(bus); + struct pci_dev *pci_dev = IWL_BUS_GET_PCI_DEV(bus); iwl_remove(priv); - iwl_pci_down(bus_specific); + pci_disable_msi(pci_dev); + pci_iounmap(pci_dev, pci_bus->hw_base); + pci_release_regions(pci_dev); + pci_disable_device(pci_dev); + pci_set_drvdata(pci_dev, NULL); + + kfree(bus); } #ifdef CONFIG_PM diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c b/drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c index a6b2b1db0b1..222d410c586 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c +++ b/drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c @@ -771,6 +771,8 @@ void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) cmd = txq->cmd[cmd_index]; meta = &txq->meta[cmd_index]; + txq->time_stamp = jiffies; + iwlagn_unmap_tfd(priv, meta, &txq->tfds[index], DMA_BIDIRECTIONAL); /* Input error checking is done when commands are added to queue. */ diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index ef67f6786a8..0019dfd8fb0 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -3697,14 +3697,15 @@ static void rt2800_efuse_read(struct rt2x00_dev *rt2x00dev, unsigned int i) rt2800_regbusy_read(rt2x00dev, EFUSE_CTRL, EFUSE_CTRL_KICK, ®); /* Apparently the data is read from end to start */ - rt2800_register_read_lock(rt2x00dev, EFUSE_DATA3, - (u32 *)&rt2x00dev->eeprom[i]); - rt2800_register_read_lock(rt2x00dev, EFUSE_DATA2, - (u32 *)&rt2x00dev->eeprom[i + 2]); - rt2800_register_read_lock(rt2x00dev, EFUSE_DATA1, - (u32 *)&rt2x00dev->eeprom[i + 4]); - rt2800_register_read_lock(rt2x00dev, EFUSE_DATA0, - (u32 *)&rt2x00dev->eeprom[i + 6]); + rt2800_register_read_lock(rt2x00dev, EFUSE_DATA3, ®); + /* The returned value is in CPU order, but eeprom is le */ + rt2x00dev->eeprom[i] = cpu_to_le32(reg); + rt2800_register_read_lock(rt2x00dev, EFUSE_DATA2, ®); + *(u32 *)&rt2x00dev->eeprom[i + 2] = cpu_to_le32(reg); + rt2800_register_read_lock(rt2x00dev, EFUSE_DATA1, ®); + *(u32 *)&rt2x00dev->eeprom[i + 4] = cpu_to_le32(reg); + rt2800_register_read_lock(rt2x00dev, EFUSE_DATA0, ®); + *(u32 *)&rt2x00dev->eeprom[i + 6] = cpu_to_le32(reg); mutex_unlock(&rt2x00dev->csr_mutex); } @@ -3870,19 +3871,23 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev) return -ENODEV; } - if (!rt2x00_rf(rt2x00dev, RF2820) && - !rt2x00_rf(rt2x00dev, RF2850) && - !rt2x00_rf(rt2x00dev, RF2720) && - !rt2x00_rf(rt2x00dev, RF2750) && - !rt2x00_rf(rt2x00dev, RF3020) && - !rt2x00_rf(rt2x00dev, RF2020) && - !rt2x00_rf(rt2x00dev, RF3021) && - !rt2x00_rf(rt2x00dev, RF3022) && - !rt2x00_rf(rt2x00dev, RF3052) && - !rt2x00_rf(rt2x00dev, RF3320) && - !rt2x00_rf(rt2x00dev, RF5370) && - !rt2x00_rf(rt2x00dev, RF5390)) { - ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); + switch (rt2x00dev->chip.rf) { + case RF2820: + case RF2850: + case RF2720: + case RF2750: + case RF3020: + case RF2020: + case RF3021: + case RF3022: + case RF3052: + case RF3320: + case RF5370: + case RF5390: + break; + default: + ERROR(rt2x00dev, "Invalid RF chipset 0x%x detected.\n", + rt2x00dev->chip.rf); return -ENODEV; } diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 939563162fb..dbf501ca317 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -464,6 +464,15 @@ static bool rt2800usb_txdone_entry_check(struct queue_entry *entry, u32 reg) int wcid, ack, pid; int tx_wcid, tx_ack, tx_pid; + if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) || + !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags)) { + WARNING(entry->queue->rt2x00dev, + "Data pending for entry %u in queue %u\n", + entry->entry_idx, entry->queue->qid); + cond_resched(); + return false; + } + wcid = rt2x00_get_field32(reg, TX_STA_FIFO_WCID); ack = rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED); pid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE); @@ -529,12 +538,11 @@ static void rt2800usb_txdone(struct rt2x00_dev *rt2x00dev) entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE); if (rt2800usb_txdone_entry_check(entry, reg)) break; + entry = NULL; } - if (!entry || rt2x00queue_empty(queue)) - break; - - rt2800_txdone_entry(entry, reg); + if (entry) + rt2800_txdone_entry(entry, reg); } } @@ -558,8 +566,10 @@ static void rt2800usb_work_txdone(struct work_struct *work) while (!rt2x00queue_empty(queue)) { entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE); - if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) + if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) || + !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags)) break; + if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags)) rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE); else if (rt2x00queue_status_timeout(entry)) diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index b6b4542c246..1e31050dafc 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -262,23 +262,20 @@ static void rt2x00usb_interrupt_txdone(struct urb *urb) struct queue_entry *entry = (struct queue_entry *)urb->context; struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - if (!test_and_clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) + if (!test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) return; - - if (rt2x00dev->ops->lib->tx_dma_done) - rt2x00dev->ops->lib->tx_dma_done(entry); - - /* - * Report the frame as DMA done - */ - rt2x00lib_dmadone(entry); - /* * Check if the frame was correctly uploaded */ if (urb->status) set_bit(ENTRY_DATA_IO_FAILED, &entry->flags); + /* + * Report the frame as DMA done + */ + rt2x00lib_dmadone(entry); + if (rt2x00dev->ops->lib->tx_dma_done) + rt2x00dev->ops->lib->tx_dma_done(entry); /* * Schedule the delayed work for reading the TX status * from the device. @@ -874,18 +871,8 @@ int rt2x00usb_suspend(struct usb_interface *usb_intf, pm_message_t state) { struct ieee80211_hw *hw = usb_get_intfdata(usb_intf); struct rt2x00_dev *rt2x00dev = hw->priv; - int retval; - - retval = rt2x00lib_suspend(rt2x00dev, state); - if (retval) - return retval; - /* - * Decrease usbdev refcount. - */ - usb_put_dev(interface_to_usbdev(usb_intf)); - - return 0; + return rt2x00lib_suspend(rt2x00dev, state); } EXPORT_SYMBOL_GPL(rt2x00usb_suspend); @@ -894,8 +881,6 @@ int rt2x00usb_resume(struct usb_interface *usb_intf) struct ieee80211_hw *hw = usb_get_intfdata(usb_intf); struct rt2x00_dev *rt2x00dev = hw->priv; - usb_get_dev(interface_to_usbdev(usb_intf)); - return rt2x00lib_resume(rt2x00dev); } EXPORT_SYMBOL_GPL(rt2x00usb_resume); diff --git a/drivers/net/wireless/rtlwifi/core.c b/drivers/net/wireless/rtlwifi/core.c index 1bdc1aa305c..04c4e9eb6ee 100644 --- a/drivers/net/wireless/rtlwifi/core.c +++ b/drivers/net/wireless/rtlwifi/core.c @@ -610,6 +610,11 @@ static void rtl_op_bss_info_changed(struct ieee80211_hw *hw, mac->link_state = MAC80211_NOLINK; memset(mac->bssid, 0, 6); + + /* reset sec info */ + rtl_cam_reset_sec_info(hw); + + rtl_cam_reset_all_entry(hw); mac->vendor = PEER_UNKNOWN; RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG, @@ -1063,6 +1068,9 @@ static int rtl_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, *or clear all entry here. */ rtl_cam_delete_one_entry(hw, mac_addr, key_idx); + + rtl_cam_reset_sec_info(hw); + break; default: RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c b/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c index 906e7aa55bc..3e52a549622 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c @@ -549,15 +549,16 @@ void rtl92cu_tx_fill_desc(struct ieee80211_hw *hw, (tcb_desc->rts_use_shortpreamble ? 1 : 0) : (tcb_desc->rts_use_shortgi ? 1 : 0))); if (mac->bw_40) { - if (tcb_desc->packet_bw) { + if (rate_flag & IEEE80211_TX_RC_DUP_DATA) { SET_TX_DESC_DATA_BW(txdesc, 1); SET_TX_DESC_DATA_SC(txdesc, 3); + } else if(rate_flag & IEEE80211_TX_RC_40_MHZ_WIDTH){ + SET_TX_DESC_DATA_BW(txdesc, 1); + SET_TX_DESC_DATA_SC(txdesc, mac->cur_40_prime_sc); } else { SET_TX_DESC_DATA_BW(txdesc, 0); - if (rate_flag & IEEE80211_TX_RC_DUP_DATA) - SET_TX_DESC_DATA_SC(txdesc, - mac->cur_40_prime_sc); - } + SET_TX_DESC_DATA_SC(txdesc, 0); + } } else { SET_TX_DESC_DATA_BW(txdesc, 0); SET_TX_DESC_DATA_SC(txdesc, 0); diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c index 7e33f1f4f3d..34f6ab53e51 100644 --- a/drivers/net/wireless/wl12xx/acx.c +++ b/drivers/net/wireless/wl12xx/acx.c @@ -77,8 +77,6 @@ int wl1271_acx_sleep_auth(struct wl1271 *wl, u8 sleep_auth) auth->sleep_auth = sleep_auth; ret = wl1271_cmd_configure(wl, ACX_SLEEP_AUTH, auth, sizeof(*auth)); - if (ret < 0) - return ret; out: kfree(auth); @@ -624,10 +622,8 @@ int wl1271_acx_cca_threshold(struct wl1271 *wl) ret = wl1271_cmd_configure(wl, ACX_CCA_THRESHOLD, detection, sizeof(*detection)); - if (ret < 0) { + if (ret < 0) wl1271_warning("failed to set cca threshold: %d", ret); - return ret; - } out: kfree(detection); diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c index e58c22d21e3..b70ae40ad66 100644 --- a/drivers/net/wireless/wl12xx/main.c +++ b/drivers/net/wireless/wl12xx/main.c @@ -4283,6 +4283,7 @@ int wl1271_init_ieee80211(struct wl1271 *wl) wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC) | BIT(NL80211_IFTYPE_AP); wl->hw->wiphy->max_scan_ssids = 1; + wl->hw->wiphy->max_sched_scan_ssids = 1; /* * Maximum length of elements in scanning probe request templates * should be the maximum length possible for a template, without diff --git a/drivers/net/wireless/wl12xx/sdio.c b/drivers/net/wireless/wl12xx/sdio.c index 5cf18c2c23f..fb1fd5af75e 100644 --- a/drivers/net/wireless/wl12xx/sdio.c +++ b/drivers/net/wireless/wl12xx/sdio.c @@ -164,7 +164,7 @@ static int wl1271_sdio_power_on(struct wl1271 *wl) /* If enabled, tell runtime PM not to power off the card */ if (pm_runtime_enabled(&func->dev)) { ret = pm_runtime_get_sync(&func->dev); - if (ret) + if (ret < 0) goto out; } else { /* Runtime PM is disabled: power up the card manually */ diff --git a/drivers/net/wireless/wl12xx/testmode.c b/drivers/net/wireless/wl12xx/testmode.c index 5d5e1ef8720..4ae8effaee2 100644 --- a/drivers/net/wireless/wl12xx/testmode.c +++ b/drivers/net/wireless/wl12xx/testmode.c @@ -36,7 +36,6 @@ enum wl1271_tm_commands { WL1271_TM_CMD_TEST, WL1271_TM_CMD_INTERROGATE, WL1271_TM_CMD_CONFIGURE, - WL1271_TM_CMD_NVS_PUSH, WL1271_TM_CMD_SET_PLT_MODE, WL1271_TM_CMD_RECOVER, @@ -139,12 +138,15 @@ static int wl1271_tm_cmd_interrogate(struct wl1271 *wl, struct nlattr *tb[]) if (ret < 0) { wl1271_warning("testmode cmd interrogate failed: %d", ret); + kfree(cmd); return ret; } skb = cfg80211_testmode_alloc_reply_skb(wl->hw->wiphy, sizeof(*cmd)); - if (!skb) + if (!skb) { + kfree(cmd); return -ENOMEM; + } NLA_PUT(skb, WL1271_TM_ATTR_DATA, sizeof(*cmd), cmd); @@ -187,48 +189,6 @@ static int wl1271_tm_cmd_configure(struct wl1271 *wl, struct nlattr *tb[]) return 0; } -static int wl1271_tm_cmd_nvs_push(struct wl1271 *wl, struct nlattr *tb[]) -{ - int ret = 0; - size_t len; - void *buf; - - wl1271_debug(DEBUG_TESTMODE, "testmode cmd nvs push"); - - if (!tb[WL1271_TM_ATTR_DATA]) - return -EINVAL; - - buf = nla_data(tb[WL1271_TM_ATTR_DATA]); - len = nla_len(tb[WL1271_TM_ATTR_DATA]); - - mutex_lock(&wl->mutex); - - kfree(wl->nvs); - - if ((wl->chip.id == CHIP_ID_1283_PG20) && - (len != sizeof(struct wl128x_nvs_file))) - return -EINVAL; - else if (len != sizeof(struct wl1271_nvs_file)) - return -EINVAL; - - wl->nvs = kzalloc(len, GFP_KERNEL); - if (!wl->nvs) { - wl1271_error("could not allocate memory for the nvs file"); - ret = -ENOMEM; - goto out; - } - - memcpy(wl->nvs, buf, len); - wl->nvs_len = len; - - wl1271_debug(DEBUG_TESTMODE, "testmode pushed nvs"); - -out: - mutex_unlock(&wl->mutex); - - return ret; -} - static int wl1271_tm_cmd_set_plt_mode(struct wl1271 *wl, struct nlattr *tb[]) { u32 val; @@ -285,8 +245,6 @@ int wl1271_tm_cmd(struct ieee80211_hw *hw, void *data, int len) return wl1271_tm_cmd_interrogate(wl, tb); case WL1271_TM_CMD_CONFIGURE: return wl1271_tm_cmd_configure(wl, tb); - case WL1271_TM_CMD_NVS_PUSH: - return wl1271_tm_cmd_nvs_push(wl, tb); case WL1271_TM_CMD_SET_PLT_MODE: return wl1271_tm_cmd_set_plt_mode(wl, tb); case WL1271_TM_CMD_RECOVER: diff --git a/drivers/of/base.c b/drivers/of/base.c index 3ff22e32b60..f7239b33d76 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -662,6 +662,90 @@ int of_property_read_string(struct device_node *np, const char *propname, EXPORT_SYMBOL_GPL(of_property_read_string); /** + * of_property_read_string_index - Find and read a string from a multiple + * strings property. + * @np: device node from which the property value is to be read. + * @propname: name of the property to be searched. + * @index: index of the string in the list of strings + * @out_string: pointer to null terminated return string, modified only if + * return value is 0. + * + * Search for a property in a device tree node and retrieve a null + * terminated string value (pointer to data, not a copy) in the list of strings + * contained in that property. + * Returns 0 on success, -EINVAL if the property does not exist, -ENODATA if + * property does not have a value, and -EILSEQ if the string is not + * null-terminated within the length of the property data. + * + * The out_string pointer is modified only if a valid string can be decoded. + */ +int of_property_read_string_index(struct device_node *np, const char *propname, + int index, const char **output) +{ + struct property *prop = of_find_property(np, propname, NULL); + int i = 0; + size_t l = 0, total = 0; + const char *p; + + if (!prop) + return -EINVAL; + if (!prop->value) + return -ENODATA; + if (strnlen(prop->value, prop->length) >= prop->length) + return -EILSEQ; + + p = prop->value; + + for (i = 0; total < prop->length; total += l, p += l) { + l = strlen(p) + 1; + if ((*p != 0) && (i++ == index)) { + *output = p; + return 0; + } + } + return -ENODATA; +} +EXPORT_SYMBOL_GPL(of_property_read_string_index); + + +/** + * of_property_count_strings - Find and return the number of strings from a + * multiple strings property. + * @np: device node from which the property value is to be read. + * @propname: name of the property to be searched. + * + * Search for a property in a device tree node and retrieve the number of null + * terminated string contain in it. Returns the number of strings on + * success, -EINVAL if the property does not exist, -ENODATA if property + * does not have a value, and -EILSEQ if the string is not null-terminated + * within the length of the property data. + */ +int of_property_count_strings(struct device_node *np, const char *propname) +{ + struct property *prop = of_find_property(np, propname, NULL); + int i = 0; + size_t l = 0, total = 0; + const char *p; + + if (!prop) + return -EINVAL; + if (!prop->value) + return -ENODATA; + if (strnlen(prop->value, prop->length) >= prop->length) + return -EILSEQ; + + p = prop->value; + + for (i = 0; total < prop->length; total += l, p += l) { + l = strlen(p) + 1; + if (*p != 0) + i++; + } + return i; +} +EXPORT_SYMBOL_GPL(of_property_count_strings); + +/** * of_parse_phandle - Resolve a phandle property to a device_node pointer * @np: Pointer to device node holding phandle property * @phandle_name: Name of property holding a phandle value diff --git a/drivers/pci/hotplug/pcihp_slot.c b/drivers/pci/hotplug/pcihp_slot.c index 753b21aaea6..3ffd9c1acc0 100644 --- a/drivers/pci/hotplug/pcihp_slot.c +++ b/drivers/pci/hotplug/pcihp_slot.c @@ -169,7 +169,9 @@ void pci_configure_slot(struct pci_dev *dev) (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI))) return; - pcie_bus_configure_settings(dev->bus, dev->bus->self->pcie_mpss); + if (dev->bus && dev->bus->self) + pcie_bus_configure_settings(dev->bus, + dev->bus->self->pcie_mpss); memset(&hpp, 0, sizeof(hpp)); ret = pci_get_hp_params(dev, &hpp); diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 0ce67423a0a..4e84fd4a431 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -77,7 +77,7 @@ unsigned long pci_cardbus_mem_size = DEFAULT_CARDBUS_MEM_SIZE; unsigned long pci_hotplug_io_size = DEFAULT_HOTPLUG_IO_SIZE; unsigned long pci_hotplug_mem_size = DEFAULT_HOTPLUG_MEM_SIZE; -enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_PERFORMANCE; +enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_SAFE; /* * The default CLS is used if arch didn't set CLS explicitly and not diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 8473727b29f..f3f94a5c068 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -1351,7 +1351,8 @@ static int pcie_find_smpss(struct pci_dev *dev, void *data) * will occur as normal. */ if (dev->is_hotplug_bridge && (!list_is_singular(&dev->bus->devices) || - dev->bus->self->pcie_type != PCI_EXP_TYPE_ROOT_PORT)) + (dev->bus->self && + dev->bus->self->pcie_type != PCI_EXP_TYPE_ROOT_PORT))) *smpss = 0; if (*smpss > dev->pcie_mpss) @@ -1396,34 +1397,37 @@ static void pcie_write_mps(struct pci_dev *dev, int mps) static void pcie_write_mrrs(struct pci_dev *dev, int mps) { - int rc, mrrs; + int rc, mrrs, dev_mpss; - if (pcie_bus_config == PCIE_BUS_PERFORMANCE) { - int dev_mpss = 128 << dev->pcie_mpss; + /* In the "safe" case, do not configure the MRRS. There appear to be + * issues with setting MRRS to 0 on a number of devices. + */ - /* For Max performance, the MRRS must be set to the largest - * supported value. However, it cannot be configured larger - * than the MPS the device or the bus can support. This assumes - * that the largest MRRS available on the device cannot be - * smaller than the device MPSS. - */ - mrrs = mps < dev_mpss ? mps : dev_mpss; - } else - /* In the "safe" case, configure the MRRS for fairness on the - * bus by making all devices have the same size - */ - mrrs = mps; + if (pcie_bus_config != PCIE_BUS_PERFORMANCE) + return; + dev_mpss = 128 << dev->pcie_mpss; + + /* For Max performance, the MRRS must be set to the largest supported + * value. However, it cannot be configured larger than the MPS the + * device or the bus can support. This assumes that the largest MRRS + * available on the device cannot be smaller than the device MPSS. + */ + mrrs = min(mps, dev_mpss); /* MRRS is a R/W register. Invalid values can be written, but a - * subsiquent read will verify if the value is acceptable or not. + * subsequent read will verify if the value is acceptable or not. * If the MRRS value provided is not acceptable (e.g., too large), * shrink the value until it is acceptable to the HW. */ while (mrrs != pcie_get_readrq(dev) && mrrs >= 128) { + dev_warn(&dev->dev, "Attempting to modify the PCI-E MRRS value" + " to %d. If any issues are encountered, please try " + "running with pci=pcie_bus_safe\n", mrrs); rc = pcie_set_readrq(dev, mrrs); if (rc) - dev_err(&dev->dev, "Failed attempting to set the MRRS\n"); + dev_err(&dev->dev, + "Failed attempting to set the MRRS\n"); mrrs /= 2; } @@ -1436,13 +1440,13 @@ static int pcie_bus_configure_set(struct pci_dev *dev, void *data) if (!pci_is_pcie(dev)) return 0; - dev_info(&dev->dev, "Dev MPS %d MPSS %d MRRS %d\n", + dev_dbg(&dev->dev, "Dev MPS %d MPSS %d MRRS %d\n", pcie_get_mps(dev), 128<<dev->pcie_mpss, pcie_get_readrq(dev)); pcie_write_mps(dev, mps); pcie_write_mrrs(dev, mps); - dev_info(&dev->dev, "Dev MPS %d MPSS %d MRRS %d\n", + dev_dbg(&dev->dev, "Dev MPS %d MPSS %d MRRS %d\n", pcie_get_mps(dev), 128<<dev->pcie_mpss, pcie_get_readrq(dev)); return 0; @@ -1456,9 +1460,6 @@ void pcie_bus_configure_settings(struct pci_bus *bus, u8 mpss) { u8 smpss = mpss; - if (!bus->self) - return; - if (!pci_is_pcie(bus->self)) return; diff --git a/drivers/power/max8997_charger.c b/drivers/power/max8997_charger.c index 7106b49b26e..ffc5033ea9c 100644 --- a/drivers/power/max8997_charger.c +++ b/drivers/power/max8997_charger.c @@ -20,6 +20,7 @@ */ #include <linux/err.h> +#include <linux/module.h> #include <linux/slab.h> #include <linux/platform_device.h> #include <linux/power_supply.h> diff --git a/drivers/power/max8998_charger.c b/drivers/power/max8998_charger.c index cc21fa2120b..ef8efadb58c 100644 --- a/drivers/power/max8998_charger.c +++ b/drivers/power/max8998_charger.c @@ -20,6 +20,7 @@ */ #include <linux/err.h> +#include <linux/module.h> #include <linux/slab.h> #include <linux/platform_device.h> #include <linux/power_supply.h> diff --git a/drivers/power/s3c_adc_battery.c b/drivers/power/s3c_adc_battery.c index a675e31b4f1..d32d0d70f9b 100644 --- a/drivers/power/s3c_adc_battery.c +++ b/drivers/power/s3c_adc_battery.c @@ -20,6 +20,7 @@ #include <linux/s3c_adc_battery.h> #include <linux/errno.h> #include <linux/init.h> +#include <linux/module.h> #include <plat/adc.h> diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c index ee893581d4b..ebe77dd87da 100644 --- a/drivers/rapidio/rio-scan.c +++ b/drivers/rapidio/rio-scan.c @@ -505,8 +505,7 @@ static struct rio_dev __devinit *rio_setup_device(struct rio_net *net, rdev->dev.dma_mask = &rdev->dma_mask; rdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); - if ((rdev->pef & RIO_PEF_INB_DOORBELL) && - (rdev->dst_ops & RIO_DST_OPS_DOORBELL)) + if (rdev->dst_ops & RIO_DST_OPS_DOORBELL) rio_init_dbell_res(&rdev->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff); diff --git a/drivers/rtc/rtc-ep93xx.c b/drivers/rtc/rtc-ep93xx.c index 335551d333b..14a42a1edc6 100644 --- a/drivers/rtc/rtc-ep93xx.c +++ b/drivers/rtc/rtc-ep93xx.c @@ -36,6 +36,7 @@ */ struct ep93xx_rtc { void __iomem *mmio_base; + struct rtc_device *rtc; }; static int ep93xx_rtc_get_swcomp(struct device *dev, unsigned short *preload, @@ -130,7 +131,6 @@ static int __init ep93xx_rtc_probe(struct platform_device *pdev) { struct ep93xx_rtc *ep93xx_rtc; struct resource *res; - struct rtc_device *rtc; int err; ep93xx_rtc = devm_kzalloc(&pdev->dev, sizeof(*ep93xx_rtc), GFP_KERNEL); @@ -151,12 +151,12 @@ static int __init ep93xx_rtc_probe(struct platform_device *pdev) return -ENXIO; pdev->dev.platform_data = ep93xx_rtc; - platform_set_drvdata(pdev, rtc); + platform_set_drvdata(pdev, ep93xx_rtc); - rtc = rtc_device_register(pdev->name, + ep93xx_rtc->rtc = rtc_device_register(pdev->name, &pdev->dev, &ep93xx_rtc_ops, THIS_MODULE); - if (IS_ERR(rtc)) { - err = PTR_ERR(rtc); + if (IS_ERR(ep93xx_rtc->rtc)) { + err = PTR_ERR(ep93xx_rtc->rtc); goto exit; } @@ -167,7 +167,7 @@ static int __init ep93xx_rtc_probe(struct platform_device *pdev) return 0; fail: - rtc_device_unregister(rtc); + rtc_device_unregister(ep93xx_rtc->rtc); exit: platform_set_drvdata(pdev, NULL); pdev->dev.platform_data = NULL; @@ -176,11 +176,11 @@ exit: static int __exit ep93xx_rtc_remove(struct platform_device *pdev) { - struct rtc_device *rtc = platform_get_drvdata(pdev); + struct ep93xx_rtc *ep93xx_rtc = platform_get_drvdata(pdev); sysfs_remove_group(&pdev->dev.kobj, &ep93xx_rtc_sysfs_files); platform_set_drvdata(pdev, NULL); - rtc_device_unregister(rtc); + rtc_device_unregister(ep93xx_rtc->rtc); pdev->dev.platform_data = NULL; return 0; diff --git a/drivers/rtc/rtc-imxdi.c b/drivers/rtc/rtc-imxdi.c index 2dd3c016327..d93a9608b1f 100644 --- a/drivers/rtc/rtc-imxdi.c +++ b/drivers/rtc/rtc-imxdi.c @@ -35,6 +35,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/rtc.h> +#include <linux/sched.h> #include <linux/workqueue.h> /* DryIce Register Definitions */ diff --git a/drivers/rtc/rtc-lib.c b/drivers/rtc/rtc-lib.c index 075f1708dea..c4cf0573111 100644 --- a/drivers/rtc/rtc-lib.c +++ b/drivers/rtc/rtc-lib.c @@ -85,6 +85,8 @@ void rtc_time_to_tm(unsigned long time, struct rtc_time *tm) time -= tm->tm_hour * 3600; tm->tm_min = time / 60; tm->tm_sec = time - tm->tm_min * 60; + + tm->tm_isdst = 0; } EXPORT_SYMBOL(rtc_time_to_tm); diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c index 9329dbb9eba..7639ab906f0 100644 --- a/drivers/rtc/rtc-s3c.c +++ b/drivers/rtc/rtc-s3c.c @@ -51,6 +51,27 @@ static enum s3c_cpu_type s3c_rtc_cpu_type; static DEFINE_SPINLOCK(s3c_rtc_pie_lock); +static void s3c_rtc_alarm_clk_enable(bool enable) +{ + static DEFINE_SPINLOCK(s3c_rtc_alarm_clk_lock); + static bool alarm_clk_enabled; + unsigned long irq_flags; + + spin_lock_irqsave(&s3c_rtc_alarm_clk_lock, irq_flags); + if (enable) { + if (!alarm_clk_enabled) { + clk_enable(rtc_clk); + alarm_clk_enabled = true; + } + } else { + if (alarm_clk_enabled) { + clk_disable(rtc_clk); + alarm_clk_enabled = false; + } + } + spin_unlock_irqrestore(&s3c_rtc_alarm_clk_lock, irq_flags); +} + /* IRQ Handlers */ static irqreturn_t s3c_rtc_alarmirq(int irq, void *id) @@ -64,6 +85,9 @@ static irqreturn_t s3c_rtc_alarmirq(int irq, void *id) writeb(S3C2410_INTP_ALM, s3c_rtc_base + S3C2410_INTP); clk_disable(rtc_clk); + + s3c_rtc_alarm_clk_enable(false); + return IRQ_HANDLED; } @@ -97,6 +121,8 @@ static int s3c_rtc_setaie(struct device *dev, unsigned int enabled) writeb(tmp, s3c_rtc_base + S3C2410_RTCALM); clk_disable(rtc_clk); + s3c_rtc_alarm_clk_enable(enabled); + return 0; } @@ -152,10 +178,6 @@ static int s3c_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm) goto retry_get_time; } - pr_debug("read time %04d.%02d.%02d %02d:%02d:%02d\n", - 1900 + rtc_tm->tm_year, rtc_tm->tm_mon, rtc_tm->tm_mday, - rtc_tm->tm_hour, rtc_tm->tm_min, rtc_tm->tm_sec); - rtc_tm->tm_sec = bcd2bin(rtc_tm->tm_sec); rtc_tm->tm_min = bcd2bin(rtc_tm->tm_min); rtc_tm->tm_hour = bcd2bin(rtc_tm->tm_hour); @@ -164,6 +186,11 @@ static int s3c_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm) rtc_tm->tm_year = bcd2bin(rtc_tm->tm_year); rtc_tm->tm_year += 100; + + pr_debug("read time %04d.%02d.%02d %02d:%02d:%02d\n", + 1900 + rtc_tm->tm_year, rtc_tm->tm_mon, rtc_tm->tm_mday, + rtc_tm->tm_hour, rtc_tm->tm_min, rtc_tm->tm_sec); + rtc_tm->tm_mon -= 1; clk_disable(rtc_clk); @@ -269,10 +296,9 @@ static int s3c_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) clk_enable(rtc_clk); pr_debug("s3c_rtc_setalarm: %d, %04d.%02d.%02d %02d:%02d:%02d\n", alrm->enabled, - 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday, + 1900 + tm->tm_year, tm->tm_mon + 1, tm->tm_mday, tm->tm_hour, tm->tm_min, tm->tm_sec); - alrm_en = readb(base + S3C2410_RTCALM) & S3C2410_RTCALM_ALMEN; writeb(0x00, base + S3C2410_RTCALM); @@ -319,49 +345,7 @@ static int s3c_rtc_proc(struct device *dev, struct seq_file *seq) return 0; } -static int s3c_rtc_open(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct rtc_device *rtc_dev = platform_get_drvdata(pdev); - int ret; - - ret = request_irq(s3c_rtc_alarmno, s3c_rtc_alarmirq, - IRQF_DISABLED, "s3c2410-rtc alarm", rtc_dev); - - if (ret) { - dev_err(dev, "IRQ%d error %d\n", s3c_rtc_alarmno, ret); - return ret; - } - - ret = request_irq(s3c_rtc_tickno, s3c_rtc_tickirq, - IRQF_DISABLED, "s3c2410-rtc tick", rtc_dev); - - if (ret) { - dev_err(dev, "IRQ%d error %d\n", s3c_rtc_tickno, ret); - goto tick_err; - } - - return ret; - - tick_err: - free_irq(s3c_rtc_alarmno, rtc_dev); - return ret; -} - -static void s3c_rtc_release(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct rtc_device *rtc_dev = platform_get_drvdata(pdev); - - /* do not clear AIE here, it may be needed for wake */ - - free_irq(s3c_rtc_alarmno, rtc_dev); - free_irq(s3c_rtc_tickno, rtc_dev); -} - static const struct rtc_class_ops s3c_rtcops = { - .open = s3c_rtc_open, - .release = s3c_rtc_release, .read_time = s3c_rtc_gettime, .set_time = s3c_rtc_settime, .read_alarm = s3c_rtc_getalarm, @@ -425,6 +409,9 @@ static int __devexit s3c_rtc_remove(struct platform_device *dev) { struct rtc_device *rtc = platform_get_drvdata(dev); + free_irq(s3c_rtc_alarmno, rtc); + free_irq(s3c_rtc_tickno, rtc); + platform_set_drvdata(dev, NULL); rtc_device_unregister(rtc); @@ -548,10 +535,32 @@ static int __devinit s3c_rtc_probe(struct platform_device *pdev) s3c_rtc_setfreq(&pdev->dev, 1); + ret = request_irq(s3c_rtc_alarmno, s3c_rtc_alarmirq, + IRQF_DISABLED, "s3c2410-rtc alarm", rtc); + if (ret) { + dev_err(&pdev->dev, "IRQ%d error %d\n", s3c_rtc_alarmno, ret); + goto err_alarm_irq; + } + + ret = request_irq(s3c_rtc_tickno, s3c_rtc_tickirq, + IRQF_DISABLED, "s3c2410-rtc tick", rtc); + if (ret) { + dev_err(&pdev->dev, "IRQ%d error %d\n", s3c_rtc_tickno, ret); + free_irq(s3c_rtc_alarmno, rtc); + goto err_tick_irq; + } + clk_disable(rtc_clk); return 0; + err_tick_irq: + free_irq(s3c_rtc_alarmno, rtc); + + err_alarm_irq: + platform_set_drvdata(pdev, NULL); + rtc_device_unregister(rtc); + err_nortc: s3c_rtc_enable(pdev, 0); clk_disable(rtc_clk); diff --git a/drivers/rtc/rtc-twl.c b/drivers/rtc/rtc-twl.c index 9a81f778d6b..20687d55e7a 100644 --- a/drivers/rtc/rtc-twl.c +++ b/drivers/rtc/rtc-twl.c @@ -362,14 +362,6 @@ static irqreturn_t twl_rtc_interrupt(int irq, void *rtc) int res; u8 rd_reg; -#ifdef CONFIG_LOCKDEP - /* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which - * we don't want and can't tolerate. Although it might be - * friendlier not to borrow this thread context... - */ - local_irq_enable(); -#endif - res = twl_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG); if (res) goto out; @@ -428,24 +420,12 @@ static struct rtc_class_ops twl_rtc_ops = { static int __devinit twl_rtc_probe(struct platform_device *pdev) { struct rtc_device *rtc; - int ret = 0; + int ret = -EINVAL; int irq = platform_get_irq(pdev, 0); u8 rd_reg; if (irq <= 0) - return -EINVAL; - - rtc = rtc_device_register(pdev->name, - &pdev->dev, &twl_rtc_ops, THIS_MODULE); - if (IS_ERR(rtc)) { - ret = PTR_ERR(rtc); - dev_err(&pdev->dev, "can't register RTC device, err %ld\n", - PTR_ERR(rtc)); - goto out0; - - } - - platform_set_drvdata(pdev, rtc); + goto out1; ret = twl_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG); if (ret < 0) @@ -462,14 +442,6 @@ static int __devinit twl_rtc_probe(struct platform_device *pdev) if (ret < 0) goto out1; - ret = request_irq(irq, twl_rtc_interrupt, - IRQF_TRIGGER_RISING, - dev_name(&rtc->dev), rtc); - if (ret < 0) { - dev_err(&pdev->dev, "IRQ is not free.\n"); - goto out1; - } - if (twl_class_is_6030()) { twl6030_interrupt_unmask(TWL6030_RTC_INT_MASK, REG_INT_MSK_LINE_A); @@ -480,28 +452,44 @@ static int __devinit twl_rtc_probe(struct platform_device *pdev) /* Check RTC module status, Enable if it is off */ ret = twl_rtc_read_u8(&rd_reg, REG_RTC_CTRL_REG); if (ret < 0) - goto out2; + goto out1; if (!(rd_reg & BIT_RTC_CTRL_REG_STOP_RTC_M)) { dev_info(&pdev->dev, "Enabling TWL-RTC.\n"); rd_reg = BIT_RTC_CTRL_REG_STOP_RTC_M; ret = twl_rtc_write_u8(rd_reg, REG_RTC_CTRL_REG); if (ret < 0) - goto out2; + goto out1; } /* init cached IRQ enable bits */ ret = twl_rtc_read_u8(&rtc_irq_bits, REG_RTC_INTERRUPTS_REG); if (ret < 0) + goto out1; + + rtc = rtc_device_register(pdev->name, + &pdev->dev, &twl_rtc_ops, THIS_MODULE); + if (IS_ERR(rtc)) { + ret = PTR_ERR(rtc); + dev_err(&pdev->dev, "can't register RTC device, err %ld\n", + PTR_ERR(rtc)); + goto out1; + } + + ret = request_threaded_irq(irq, NULL, twl_rtc_interrupt, + IRQF_TRIGGER_RISING, + dev_name(&rtc->dev), rtc); + if (ret < 0) { + dev_err(&pdev->dev, "IRQ is not free.\n"); goto out2; + } - return ret; + platform_set_drvdata(pdev, rtc); + return 0; out2: - free_irq(irq, rtc); -out1: rtc_device_unregister(rtc); -out0: +out1: return ret; } diff --git a/drivers/s390/block/dasd_ioctl.c b/drivers/s390/block/dasd_ioctl.c index eb4e034378c..f1a2016829f 100644 --- a/drivers/s390/block/dasd_ioctl.c +++ b/drivers/s390/block/dasd_ioctl.c @@ -249,6 +249,7 @@ static int dasd_ioctl_reset_profile(struct dasd_block *block) static int dasd_ioctl_read_profile(struct dasd_block *block, void __user *argp) { struct dasd_profile_info_t *data; + int rc = 0; data = kmalloc(sizeof(*data), GFP_KERNEL); if (!data) @@ -279,11 +280,14 @@ static int dasd_ioctl_read_profile(struct dasd_block *block, void __user *argp) spin_unlock_bh(&block->profile.lock); } else { spin_unlock_bh(&block->profile.lock); - return -EIO; + rc = -EIO; + goto out; } if (copy_to_user(argp, data, sizeof(*data))) - return -EFAULT; - return 0; + rc = -EFAULT; +out: + kfree(data); + return rc; } #else static int dasd_ioctl_reset_profile(struct dasd_block *block) diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c index be55fb2b1b1..837e010299a 100644 --- a/drivers/s390/char/sclp_cmd.c +++ b/drivers/s390/char/sclp_cmd.c @@ -383,8 +383,10 @@ static int sclp_attach_storage(u8 id) switch (sccb->header.response_code) { case 0x0020: set_bit(id, sclp_storage_ids); - for (i = 0; i < sccb->assigned; i++) - sclp_unassign_storage(sccb->entries[i] >> 16); + for (i = 0; i < sccb->assigned; i++) { + if (sccb->entries[i]) + sclp_unassign_storage(sccb->entries[i] >> 16); + } break; default: rc = -EIO; diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 8d9dae89f06..3878b739508 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -837,6 +837,7 @@ config SCSI_ISCI # (temporary): known alpha quality driver depends on EXPERIMENTAL select SCSI_SAS_LIBSAS + select SCSI_SAS_HOST_SMP ---help--- This driver supports the 6Gb/s SAS capabilities of the storage control unit found in the Intel(R) C600 series chipset. diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c index 9ae80cd5953..dba72a4e6a1 100644 --- a/drivers/scsi/bnx2i/bnx2i_hwi.c +++ b/drivers/scsi/bnx2i/bnx2i_hwi.c @@ -563,7 +563,7 @@ int bnx2i_send_iscsi_nopout(struct bnx2i_conn *bnx2i_conn, nopout_wqe->itt = ((u16)task->itt | (ISCSI_TASK_TYPE_MPATH << ISCSI_TMF_REQUEST_TYPE_SHIFT)); - nopout_wqe->ttt = nopout_hdr->ttt; + nopout_wqe->ttt = be32_to_cpu(nopout_hdr->ttt); nopout_wqe->flags = 0; if (!unsol) nopout_wqe->flags = ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION; diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index ba710e350ac..5d0e9a24ae9 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -432,6 +432,8 @@ void fcoe_interface_cleanup(struct fcoe_interface *fcoe) u8 flogi_maddr[ETH_ALEN]; const struct net_device_ops *ops; + rtnl_lock(); + /* * Don't listen for Ethernet packets anymore. * synchronize_net() ensures that the packet handlers are not running @@ -461,6 +463,8 @@ void fcoe_interface_cleanup(struct fcoe_interface *fcoe) " specific feature for LLD.\n"); } + rtnl_unlock(); + /* Release the self-reference taken during fcoe_interface_create() */ fcoe_interface_put(fcoe); } @@ -1951,11 +1955,8 @@ static void fcoe_destroy_work(struct work_struct *work) fcoe_if_destroy(port->lport); /* Do not tear down the fcoe interface for NPIV port */ - if (!npiv) { - rtnl_lock(); + if (!npiv) fcoe_interface_cleanup(fcoe); - rtnl_unlock(); - } mutex_unlock(&fcoe_config_mutex); } @@ -2009,8 +2010,9 @@ static int fcoe_create(struct net_device *netdev, enum fip_state fip_mode) printk(KERN_ERR "fcoe: Failed to create interface (%s)\n", netdev->name); rc = -EIO; + rtnl_unlock(); fcoe_interface_cleanup(fcoe); - goto out_nodev; + goto out_nortnl; } /* Make this the "master" N_Port */ @@ -2027,6 +2029,7 @@ static int fcoe_create(struct net_device *netdev, enum fip_state fip_mode) out_nodev: rtnl_unlock(); +out_nortnl: mutex_unlock(&fcoe_config_mutex); return rc; } diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index ec61bdb833a..b200b736b00 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -676,6 +676,16 @@ static void hpsa_scsi_replace_entry(struct ctlr_info *h, int hostno, BUG_ON(entry < 0 || entry >= HPSA_MAX_SCSI_DEVS_PER_HBA); removed[*nremoved] = h->dev[entry]; (*nremoved)++; + + /* + * New physical devices won't have target/lun assigned yet + * so we need to preserve the values in the slot we are replacing. + */ + if (new_entry->target == -1) { + new_entry->target = h->dev[entry]->target; + new_entry->lun = h->dev[entry]->lun; + } + h->dev[entry] = new_entry; added[*nadded] = new_entry; (*nadded)++; @@ -1548,10 +1558,17 @@ static inline void hpsa_set_bus_target_lun(struct hpsa_scsi_dev_t *device, } static int hpsa_update_device_info(struct ctlr_info *h, - unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device) + unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device, + unsigned char *is_OBDR_device) { -#define OBDR_TAPE_INQ_SIZE 49 + +#define OBDR_SIG_OFFSET 43 +#define OBDR_TAPE_SIG "$DR-10" +#define OBDR_SIG_LEN (sizeof(OBDR_TAPE_SIG) - 1) +#define OBDR_TAPE_INQ_SIZE (OBDR_SIG_OFFSET + OBDR_SIG_LEN) + unsigned char *inq_buff; + unsigned char *obdr_sig; inq_buff = kzalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL); if (!inq_buff) @@ -1583,6 +1600,16 @@ static int hpsa_update_device_info(struct ctlr_info *h, else this_device->raid_level = RAID_UNKNOWN; + if (is_OBDR_device) { + /* See if this is a One-Button-Disaster-Recovery device + * by looking for "$DR-10" at offset 43 in inquiry data. + */ + obdr_sig = &inq_buff[OBDR_SIG_OFFSET]; + *is_OBDR_device = (this_device->devtype == TYPE_ROM && + strncmp(obdr_sig, OBDR_TAPE_SIG, + OBDR_SIG_LEN) == 0); + } + kfree(inq_buff); return 0; @@ -1716,7 +1743,7 @@ static int add_msa2xxx_enclosure_device(struct ctlr_info *h, return 0; } - if (hpsa_update_device_info(h, scsi3addr, this_device)) + if (hpsa_update_device_info(h, scsi3addr, this_device, NULL)) return 0; (*nmsa2xxx_enclosures)++; hpsa_set_bus_target_lun(this_device, bus, target, 0); @@ -1808,7 +1835,6 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) */ struct ReportLUNdata *physdev_list = NULL; struct ReportLUNdata *logdev_list = NULL; - unsigned char *inq_buff = NULL; u32 nphysicals = 0; u32 nlogicals = 0; u32 ndev_allocated = 0; @@ -1824,11 +1850,9 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) GFP_KERNEL); physdev_list = kzalloc(reportlunsize, GFP_KERNEL); logdev_list = kzalloc(reportlunsize, GFP_KERNEL); - inq_buff = kmalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL); tmpdevice = kzalloc(sizeof(*tmpdevice), GFP_KERNEL); - if (!currentsd || !physdev_list || !logdev_list || - !inq_buff || !tmpdevice) { + if (!currentsd || !physdev_list || !logdev_list || !tmpdevice) { dev_err(&h->pdev->dev, "out of memory\n"); goto out; } @@ -1863,7 +1887,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) /* adjust our table of devices */ nmsa2xxx_enclosures = 0; for (i = 0; i < nphysicals + nlogicals + 1; i++) { - u8 *lunaddrbytes; + u8 *lunaddrbytes, is_OBDR = 0; /* Figure out where the LUN ID info is coming from */ lunaddrbytes = figure_lunaddrbytes(h, raid_ctlr_position, @@ -1874,7 +1898,8 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) continue; /* Get device type, vendor, model, device id */ - if (hpsa_update_device_info(h, lunaddrbytes, tmpdevice)) + if (hpsa_update_device_info(h, lunaddrbytes, tmpdevice, + &is_OBDR)) continue; /* skip it if we can't talk to it. */ figure_bus_target_lun(h, lunaddrbytes, &bus, &target, &lun, tmpdevice); @@ -1898,7 +1923,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) hpsa_set_bus_target_lun(this_device, bus, target, lun); switch (this_device->devtype) { - case TYPE_ROM: { + case TYPE_ROM: /* We don't *really* support actual CD-ROM devices, * just "One Button Disaster Recovery" tape drive * which temporarily pretends to be a CD-ROM drive. @@ -1906,15 +1931,8 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) * device by checking for "$DR-10" in bytes 43-48 of * the inquiry data. */ - char obdr_sig[7]; -#define OBDR_TAPE_SIG "$DR-10" - strncpy(obdr_sig, &inq_buff[43], 6); - obdr_sig[6] = '\0'; - if (strncmp(obdr_sig, OBDR_TAPE_SIG, 6) != 0) - /* Not OBDR device, ignore it. */ - break; - } - ncurrent++; + if (is_OBDR) + ncurrent++; break; case TYPE_DISK: if (i < nphysicals) @@ -1947,7 +1965,6 @@ out: for (i = 0; i < ndev_allocated; i++) kfree(currentsd[i]); kfree(currentsd); - kfree(inq_buff); kfree(physdev_list); kfree(logdev_list); } diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 26072f1e985..6981b773a88 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -531,6 +531,9 @@ static void sci_controller_process_completions(struct isci_host *ihost) break; case SCU_COMPLETION_TYPE_EVENT: + sci_controller_event_completion(ihost, ent); + break; + case SCU_COMPLETION_TYPE_NOTIFY: { event_cycle ^= ((event_get+1) & SCU_MAX_EVENTS) << (SMU_COMPLETION_QUEUE_GET_EVENT_CYCLE_BIT_SHIFT - SCU_MAX_EVENTS_SHIFT); @@ -1091,6 +1094,7 @@ static void isci_host_completion_routine(unsigned long data) struct isci_request *request; struct isci_request *next_request; struct sas_task *task; + u16 active; INIT_LIST_HEAD(&completed_request_list); INIT_LIST_HEAD(&errored_request_list); @@ -1181,6 +1185,13 @@ static void isci_host_completion_routine(unsigned long data) } } + /* the coalesence timeout doubles at each encoding step, so + * update it based on the ilog2 value of the outstanding requests + */ + active = isci_tci_active(ihost); + writel(SMU_ICC_GEN_VAL(NUMBER, active) | + SMU_ICC_GEN_VAL(TIMER, ISCI_COALESCE_BASE + ilog2(active)), + &ihost->smu_registers->interrupt_coalesce_control); } /** @@ -1471,7 +1482,7 @@ static void sci_controller_ready_state_enter(struct sci_base_state_machine *sm) struct isci_host *ihost = container_of(sm, typeof(*ihost), sm); /* set the default interrupt coalescence number and timeout value. */ - sci_controller_set_interrupt_coalescence(ihost, 0x10, 250); + sci_controller_set_interrupt_coalescence(ihost, 0, 0); } static void sci_controller_ready_state_exit(struct sci_base_state_machine *sm) diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 062101a39f7..9f33831a2f0 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -369,6 +369,9 @@ static inline struct isci_host *dev_to_ihost(struct domain_device *dev) #define ISCI_TAG_SEQ(tag) (((tag) >> 12) & (SCI_MAX_SEQ-1)) #define ISCI_TAG_TCI(tag) ((tag) & (SCI_MAX_IO_REQUESTS-1)) +/* interrupt coalescing baseline: 9 == 3 to 5us interrupt delay per command */ +#define ISCI_COALESCE_BASE 9 + /* expander attached sata devices require 3 rnc slots */ static inline int sci_remote_device_node_count(struct isci_remote_device *idev) { diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index 61e0d09e2b5..29aa34efb0f 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -59,10 +59,19 @@ #include <linux/firmware.h> #include <linux/efi.h> #include <asm/string.h> +#include <scsi/scsi_host.h> #include "isci.h" #include "task.h" #include "probe_roms.h" +#define MAJ 1 +#define MIN 0 +#define BUILD 0 +#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \ + __stringify(BUILD) + +MODULE_VERSION(DRV_VERSION); + static struct scsi_transport_template *isci_transport_template; static DEFINE_PCI_DEVICE_TABLE(isci_id_table) = { @@ -113,6 +122,22 @@ unsigned char max_concurr_spinup = 1; module_param(max_concurr_spinup, byte, 0); MODULE_PARM_DESC(max_concurr_spinup, "Max concurrent device spinup"); +static ssize_t isci_show_id(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *shost = container_of(dev, typeof(*shost), shost_dev); + struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost); + struct isci_host *ihost = container_of(sas_ha, typeof(*ihost), sas_ha); + + return snprintf(buf, PAGE_SIZE, "%d\n", ihost->id); +} + +static DEVICE_ATTR(isci_id, S_IRUGO, isci_show_id, NULL); + +struct device_attribute *isci_host_attrs[] = { + &dev_attr_isci_id, + NULL +}; + static struct scsi_host_template isci_sht = { .module = THIS_MODULE, @@ -138,6 +163,7 @@ static struct scsi_host_template isci_sht = { .slave_alloc = sas_slave_alloc, .target_destroy = sas_target_destroy, .ioctl = sas_ioctl, + .shost_attrs = isci_host_attrs, }; static struct sas_domain_function_template isci_transport_ops = { @@ -232,17 +258,6 @@ static int isci_register_sas_ha(struct isci_host *isci_host) return 0; } -static ssize_t isci_show_id(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct Scsi_Host *shost = container_of(dev, typeof(*shost), shost_dev); - struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost); - struct isci_host *ihost = container_of(sas_ha, typeof(*ihost), sas_ha); - - return snprintf(buf, PAGE_SIZE, "%d\n", ihost->id); -} - -static DEVICE_ATTR(isci_id, S_IRUGO, isci_show_id, NULL); - static void isci_unregister(struct isci_host *isci_host) { struct Scsi_Host *shost; @@ -251,7 +266,6 @@ static void isci_unregister(struct isci_host *isci_host) return; shost = isci_host->shost; - device_remove_file(&shost->shost_dev, &dev_attr_isci_id); sas_unregister_ha(&isci_host->sas_ha); @@ -415,14 +429,8 @@ static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id) if (err) goto err_shost_remove; - err = device_create_file(&shost->shost_dev, &dev_attr_isci_id); - if (err) - goto err_unregister_ha; - return isci_host; - err_unregister_ha: - sas_unregister_ha(&(isci_host->sas_ha)); err_shost_remove: scsi_remove_host(shost); err_shost: @@ -540,7 +548,8 @@ static __init int isci_init(void) { int err; - pr_info("%s: Intel(R) C600 SAS Controller Driver\n", DRV_NAME); + pr_info("%s: Intel(R) C600 SAS Controller Driver - version %s\n", + DRV_NAME, DRV_VERSION); isci_transport_template = sas_domain_attach_transport(&isci_transport_ops); if (!isci_transport_template) diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index 79313a7a235..430fc8ff014 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -104,6 +104,7 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy, u32 parity_count = 0; u32 llctl, link_rate; u32 clksm_value = 0; + u32 sp_timeouts = 0; iphy->link_layer_registers = reg; @@ -211,6 +212,18 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy, llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate); writel(llctl, &iphy->link_layer_registers->link_layer_control); + sp_timeouts = readl(&iphy->link_layer_registers->sas_phy_timeouts); + + /* Clear the default 0x36 (54us) RATE_CHANGE timeout value. */ + sp_timeouts &= ~SCU_SAS_PHYTOV_GEN_VAL(RATE_CHANGE, 0xFF); + + /* Set RATE_CHANGE timeout value to 0x3B (59us). This ensures SCU can + * lock with 3Gb drive when SCU max rate is set to 1.5Gb. + */ + sp_timeouts |= SCU_SAS_PHYTOV_GEN_VAL(RATE_CHANGE, 0x3B); + + writel(sp_timeouts, &iphy->link_layer_registers->sas_phy_timeouts); + if (is_a2(ihost->pdev)) { /* Program the max ARB time for the PHY to 700us so we inter-operate with * the PMC expander which shuts down PHYs if the expander PHY generates too diff --git a/drivers/scsi/isci/registers.h b/drivers/scsi/isci/registers.h index 9b266c7428e..00afc738bbe 100644 --- a/drivers/scsi/isci/registers.h +++ b/drivers/scsi/isci/registers.h @@ -1299,6 +1299,18 @@ struct scu_transport_layer_registers { #define SCU_AFE_XCVRCR_OFFSET 0x00DC #define SCU_AFE_LUTCR_OFFSET 0x00E0 +#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_ALIGN_DETECTION_SHIFT (0UL) +#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_ALIGN_DETECTION_MASK (0x000000FFUL) +#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_HOT_PLUG_SHIFT (8UL) +#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_HOT_PLUG_MASK (0x0000FF00UL) +#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_COMSAS_DETECTION_SHIFT (16UL) +#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_COMSAS_DETECTION_MASK (0x00FF0000UL) +#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_RATE_CHANGE_SHIFT (24UL) +#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_RATE_CHANGE_MASK (0xFF000000UL) + +#define SCU_SAS_PHYTOV_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_##name, value) + #define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_SHIFT (0) #define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_MASK (0x00000003) #define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1 (0) diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index a46e07ac789..b5d3a8c4d32 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -732,12 +732,20 @@ sci_io_request_terminate(struct isci_request *ireq) sci_change_state(&ireq->sm, SCI_REQ_ABORTING); return SCI_SUCCESS; case SCI_REQ_TASK_WAIT_TC_RESP: + /* The task frame was already confirmed to have been + * sent by the SCU HW. Since the state machine is + * now only waiting for the task response itself, + * abort the request and complete it immediately + * and don't wait for the task response. + */ sci_change_state(&ireq->sm, SCI_REQ_ABORTING); sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); return SCI_SUCCESS; case SCI_REQ_ABORTING: - sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); - return SCI_SUCCESS; + /* If a request has a termination requested twice, return + * a failure indication, since HW confirmation of the first + * abort is still outstanding. + */ case SCI_REQ_COMPLETED: default: dev_warn(&ireq->owning_controller->pdev->dev, @@ -2399,22 +2407,19 @@ static void isci_task_save_for_upper_layer_completion( } } -static void isci_request_process_stp_response(struct sas_task *task, - void *response_buffer) +static void isci_process_stp_response(struct sas_task *task, struct dev_to_host_fis *fis) { - struct dev_to_host_fis *d2h_reg_fis = response_buffer; struct task_status_struct *ts = &task->task_status; struct ata_task_resp *resp = (void *)&ts->buf[0]; - resp->frame_len = le16_to_cpu(*(__le16 *)(response_buffer + 6)); - memcpy(&resp->ending_fis[0], response_buffer + 16, 24); + resp->frame_len = sizeof(*fis); + memcpy(resp->ending_fis, fis, sizeof(*fis)); ts->buf_valid_size = sizeof(*resp); - /** - * If the device fault bit is set in the status register, then + /* If the device fault bit is set in the status register, then * set the sense data and return. */ - if (d2h_reg_fis->status & ATA_DF) + if (fis->status & ATA_DF) ts->stat = SAS_PROTO_RESPONSE; else ts->stat = SAM_STAT_GOOD; @@ -2428,7 +2433,6 @@ static void isci_request_io_request_complete(struct isci_host *ihost, { struct sas_task *task = isci_request_access_task(request); struct ssp_response_iu *resp_iu; - void *resp_buf; unsigned long task_flags; struct isci_remote_device *idev = isci_lookup_device(task->dev); enum service_response response = SAS_TASK_UNDELIVERED; @@ -2565,9 +2569,7 @@ static void isci_request_io_request_complete(struct isci_host *ihost, task); if (sas_protocol_ata(task->task_proto)) { - resp_buf = &request->stp.rsp; - isci_request_process_stp_response(task, - resp_buf); + isci_process_stp_response(task, &request->stp.rsp); } else if (SAS_PROTOCOL_SSP == task->task_proto) { /* crack the iu response buffer. */ diff --git a/drivers/scsi/isci/unsolicited_frame_control.c b/drivers/scsi/isci/unsolicited_frame_control.c index e9e1e2abacb..16f88ab939c 100644 --- a/drivers/scsi/isci/unsolicited_frame_control.c +++ b/drivers/scsi/isci/unsolicited_frame_control.c @@ -72,7 +72,7 @@ int sci_unsolicited_frame_control_construct(struct isci_host *ihost) */ buf_len = SCU_MAX_UNSOLICITED_FRAMES * SCU_UNSOLICITED_FRAME_BUFFER_SIZE; header_len = SCU_MAX_UNSOLICITED_FRAMES * sizeof(struct scu_unsolicited_frame_header); - size = buf_len + header_len + SCU_MAX_UNSOLICITED_FRAMES * sizeof(dma_addr_t); + size = buf_len + header_len + SCU_MAX_UNSOLICITED_FRAMES * sizeof(uf_control->address_table.array[0]); /* * The Unsolicited Frame buffers are set at the start of the UF diff --git a/drivers/scsi/isci/unsolicited_frame_control.h b/drivers/scsi/isci/unsolicited_frame_control.h index 31cb9506f52..75d896686f5 100644 --- a/drivers/scsi/isci/unsolicited_frame_control.h +++ b/drivers/scsi/isci/unsolicited_frame_control.h @@ -214,7 +214,7 @@ struct sci_uf_address_table_array { * starting address of the UF address table. * 64-bit pointers are required by the hardware. */ - dma_addr_t *array; + u64 *array; /** * This field specifies the physical address location for the UF diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index 01ff082dc34..d261e982a2f 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -494,6 +494,9 @@ static int fc_seq_send(struct fc_lport *lport, struct fc_seq *sp, */ error = lport->tt.frame_send(lport, fp); + if (fh->fh_type == FC_TYPE_BLS) + return error; + /* * Update the exchange and sequence flags, * assuming all frames for the sequence have been sent. @@ -575,42 +578,35 @@ static void fc_seq_set_resp(struct fc_seq *sp, } /** - * fc_seq_exch_abort() - Abort an exchange and sequence - * @req_sp: The sequence to be aborted + * fc_exch_abort_locked() - Abort an exchange + * @ep: The exchange to be aborted * @timer_msec: The period of time to wait before aborting * - * Generally called because of a timeout or an abort from the upper layer. + * Locking notes: Called with exch lock held + * + * Return value: 0 on success else error code */ -static int fc_seq_exch_abort(const struct fc_seq *req_sp, - unsigned int timer_msec) +static int fc_exch_abort_locked(struct fc_exch *ep, + unsigned int timer_msec) { struct fc_seq *sp; - struct fc_exch *ep; struct fc_frame *fp; int error; - ep = fc_seq_exch(req_sp); - - spin_lock_bh(&ep->ex_lock); if (ep->esb_stat & (ESB_ST_COMPLETE | ESB_ST_ABNORMAL) || - ep->state & (FC_EX_DONE | FC_EX_RST_CLEANUP)) { - spin_unlock_bh(&ep->ex_lock); + ep->state & (FC_EX_DONE | FC_EX_RST_CLEANUP)) return -ENXIO; - } /* * Send the abort on a new sequence if possible. */ sp = fc_seq_start_next_locked(&ep->seq); - if (!sp) { - spin_unlock_bh(&ep->ex_lock); + if (!sp) return -ENOMEM; - } ep->esb_stat |= ESB_ST_SEQ_INIT | ESB_ST_ABNORMAL; if (timer_msec) fc_exch_timer_set_locked(ep, timer_msec); - spin_unlock_bh(&ep->ex_lock); /* * If not logged into the fabric, don't send ABTS but leave @@ -633,6 +629,28 @@ static int fc_seq_exch_abort(const struct fc_seq *req_sp, } /** + * fc_seq_exch_abort() - Abort an exchange and sequence + * @req_sp: The sequence to be aborted + * @timer_msec: The period of time to wait before aborting + * + * Generally called because of a timeout or an abort from the upper layer. + * + * Return value: 0 on success else error code + */ +static int fc_seq_exch_abort(const struct fc_seq *req_sp, + unsigned int timer_msec) +{ + struct fc_exch *ep; + int error; + + ep = fc_seq_exch(req_sp); + spin_lock_bh(&ep->ex_lock); + error = fc_exch_abort_locked(ep, timer_msec); + spin_unlock_bh(&ep->ex_lock); + return error; +} + +/** * fc_exch_timeout() - Handle exchange timer expiration * @work: The work_struct identifying the exchange that timed out */ @@ -1715,6 +1733,7 @@ static void fc_exch_reset(struct fc_exch *ep) int rc = 1; spin_lock_bh(&ep->ex_lock); + fc_exch_abort_locked(ep, 0); ep->state |= FC_EX_RST_CLEANUP; if (cancel_delayed_work(&ep->timeout_work)) atomic_dec(&ep->ex_refcnt); /* drop hold for timer */ @@ -1962,6 +1981,7 @@ static struct fc_seq *fc_exch_seq_send(struct fc_lport *lport, struct fc_exch *ep; struct fc_seq *sp = NULL; struct fc_frame_header *fh; + struct fc_fcp_pkt *fsp = NULL; int rc = 1; ep = fc_exch_alloc(lport, fp); @@ -1984,8 +2004,10 @@ static struct fc_seq *fc_exch_seq_send(struct fc_lport *lport, fc_exch_setup_hdr(ep, fp, ep->f_ctl); sp->cnt++; - if (ep->xid <= lport->lro_xid && fh->fh_r_ctl == FC_RCTL_DD_UNSOL_CMD) + if (ep->xid <= lport->lro_xid && fh->fh_r_ctl == FC_RCTL_DD_UNSOL_CMD) { + fsp = fr_fsp(fp); fc_fcp_ddp_setup(fr_fsp(fp), ep->xid); + } if (unlikely(lport->tt.frame_send(lport, fp))) goto err; @@ -1999,7 +2021,8 @@ static struct fc_seq *fc_exch_seq_send(struct fc_lport *lport, spin_unlock_bh(&ep->ex_lock); return sp; err: - fc_fcp_ddp_done(fr_fsp(fp)); + if (fsp) + fc_fcp_ddp_done(fsp); rc = fc_exch_done_locked(ep); spin_unlock_bh(&ep->ex_lock); if (!rc) diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index afb63c84314..4c41ee816f0 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -2019,6 +2019,11 @@ int fc_eh_abort(struct scsi_cmnd *sc_cmd) struct fc_fcp_internal *si; int rc = FAILED; unsigned long flags; + int rval; + + rval = fc_block_scsi_eh(sc_cmd); + if (rval) + return rval; lport = shost_priv(sc_cmd->device->host); if (lport->state != LPORT_ST_READY) @@ -2068,9 +2073,9 @@ int fc_eh_device_reset(struct scsi_cmnd *sc_cmd) int rc = FAILED; int rval; - rval = fc_remote_port_chkready(rport); + rval = fc_block_scsi_eh(sc_cmd); if (rval) - goto out; + return rval; lport = shost_priv(sc_cmd->device->host); @@ -2116,6 +2121,8 @@ int fc_eh_host_reset(struct scsi_cmnd *sc_cmd) FC_SCSI_DBG(lport, "Resetting host\n"); + fc_block_scsi_eh(sc_cmd); + lport->tt.lport_reset(lport); wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT; while (!fc_fcp_lport_queue_ready(lport) && time_before(jiffies, diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index e55ed9cf23f..628f347404f 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -88,6 +88,7 @@ */ #include <linux/timer.h> +#include <linux/delay.h> #include <linux/slab.h> #include <asm/unaligned.h> @@ -1029,8 +1030,16 @@ static void fc_lport_enter_reset(struct fc_lport *lport) FCH_EVT_LIPRESET, 0); fc_vports_linkchange(lport); fc_lport_reset_locked(lport); - if (lport->link_up) + if (lport->link_up) { + /* + * Wait upto resource allocation time out before + * doing re-login since incomplete FIP exchanged + * from last session may collide with exchanges + * in new session. + */ + msleep(lport->r_a_tov); fc_lport_enter_flogi(lport); + } } /** diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 7836eb01c7f..a31e05f3bfd 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -1786,13 +1786,16 @@ qla24xx_vport_create(struct fc_vport *fc_vport, bool disable) fc_vport_set_state(fc_vport, FC_VPORT_LINKDOWN); } - if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif) { + if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) { if (ha->fw_attributes & BIT_4) { + int prot = 0; vha->flags.difdix_supported = 1; ql_dbg(ql_dbg_user, vha, 0x7082, "Registered for DIF/DIX type 1 and 3 protection.\n"); + if (ql2xenabledif == 1) + prot = SHOST_DIX_TYPE0_PROTECTION; scsi_host_set_prot(vha->host, - SHOST_DIF_TYPE1_PROTECTION + prot | SHOST_DIF_TYPE1_PROTECTION | SHOST_DIF_TYPE2_PROTECTION | SHOST_DIF_TYPE3_PROTECTION | SHOST_DIX_TYPE1_PROTECTION diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index 2155071f310..d79cd8a5f83 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -8,24 +8,24 @@ /* * Table for showing the current message id in use for particular level * Change this table for addition of log/debug messages. - * ----------------------------------------------------- - * | Level | Last Value Used | - * ----------------------------------------------------- - * | Module Init and Probe | 0x0116 | - * | Mailbox commands | 0x111e | - * | Device Discovery | 0x2083 | - * | Queue Command and IO tracing | 0x302e | - * | DPC Thread | 0x401c | - * | Async Events | 0x5059 | - * | Timer Routines | 0x600d | - * | User Space Interactions | 0x709c | - * | Task Management | 0x8043 | - * | AER/EEH | 0x900f | - * | Virtual Port | 0xa007 | - * | ISP82XX Specific | 0xb027 | - * | MultiQ | 0xc00b | - * | Misc | 0xd00b | - * ----------------------------------------------------- + * ---------------------------------------------------------------------- + * | Level | Last Value Used | Holes | + * ---------------------------------------------------------------------- + * | Module Init and Probe | 0x0116 | | + * | Mailbox commands | 0x1126 | | + * | Device Discovery | 0x2083 | | + * | Queue Command and IO tracing | 0x302e | 0x3008 | + * | DPC Thread | 0x401c | | + * | Async Events | 0x5059 | | + * | Timer Routines | 0x600d | | + * | User Space Interactions | 0x709d | | + * | Task Management | 0x8041 | | + * | AER/EEH | 0x900f | | + * | Virtual Port | 0xa007 | | + * | ISP82XX Specific | 0xb04f | | + * | MultiQ | 0xc00b | | + * | Misc | 0xd00b | | + * ---------------------------------------------------------------------- */ #include "qla_def.h" diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index cc5a79259d3..a03eaf40f37 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2529,6 +2529,7 @@ struct qla_hw_data { #define DT_ISP8021 BIT_14 #define DT_ISP_LAST (DT_ISP8021 << 1) +#define DT_T10_PI BIT_25 #define DT_IIDMA BIT_26 #define DT_FWI2 BIT_27 #define DT_ZIO_SUPPORTED BIT_28 @@ -2572,6 +2573,7 @@ struct qla_hw_data { #define IS_NOCACHE_VPD_TYPE(ha) (IS_QLA81XX(ha)) #define IS_ALOGIO_CAPABLE(ha) (IS_QLA23XX(ha) || IS_FWI2_CAPABLE(ha)) +#define IS_T10_PI_CAPABLE(ha) ((ha)->device_type & DT_T10_PI) #define IS_IIDMA_CAPABLE(ha) ((ha)->device_type & DT_IIDMA) #define IS_FWI2_CAPABLE(ha) ((ha)->device_type & DT_FWI2) #define IS_ZIO_SUPPORTED(ha) ((ha)->device_type & DT_ZIO_SUPPORTED) diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h index 691783abfb6..aa69486dc06 100644 --- a/drivers/scsi/qla2xxx/qla_fw.h +++ b/drivers/scsi/qla2xxx/qla_fw.h @@ -537,6 +537,11 @@ struct sts_entry_24xx { /* * If DIF Error is set in comp_status, these additional fields are * defined: + * + * !!! NOTE: Firmware sends expected/actual DIF data in big endian + * format; but all of the "data" field gets swab32-d in the beginning + * of qla2x00_status_entry(). + * * &data[10] : uint8_t report_runt_bg[2]; - computed guard * &data[12] : uint8_t actual_dif[8]; - DIF Data received * &data[20] : uint8_t expected_dif[8]; - DIF Data computed diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index def694271bf..37da04d3db2 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -3838,15 +3838,12 @@ qla2x00_loop_resync(scsi_qla_host_t *vha) req = vha->req; rsp = req->rsp; - atomic_set(&vha->loop_state, LOOP_UPDATE); clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags); if (vha->flags.online) { if (!(rval = qla2x00_fw_ready(vha))) { /* Wait at most MAX_TARGET RSCNs for a stable link. */ wait_time = 256; do { - atomic_set(&vha->loop_state, LOOP_UPDATE); - /* Issue a marker after FW becomes ready. */ qla2x00_marker(vha, req, rsp, 0, 0, MK_SYNC_ALL); diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h index d2e904bc21c..9902834e0b7 100644 --- a/drivers/scsi/qla2xxx/qla_inline.h +++ b/drivers/scsi/qla2xxx/qla_inline.h @@ -102,3 +102,32 @@ qla2x00_set_fcport_state(fc_port_t *fcport, int state) fcport->d_id.b.al_pa); } } + +static inline int +qla2x00_hba_err_chk_enabled(srb_t *sp) +{ + /* + * Uncomment when corresponding SCSI changes are done. + * + if (!sp->cmd->prot_chk) + return 0; + * + */ + + switch (scsi_get_prot_op(sp->cmd)) { + case SCSI_PROT_READ_STRIP: + case SCSI_PROT_WRITE_INSERT: + if (ql2xenablehba_err_chk >= 1) + return 1; + break; + case SCSI_PROT_READ_PASS: + case SCSI_PROT_WRITE_PASS: + if (ql2xenablehba_err_chk >= 2) + return 1; + break; + case SCSI_PROT_READ_INSERT: + case SCSI_PROT_WRITE_STRIP: + return 1; + } + return 0; +} diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c index 49d6906af88..dbec89622a0 100644 --- a/drivers/scsi/qla2xxx/qla_iocb.c +++ b/drivers/scsi/qla2xxx/qla_iocb.c @@ -709,20 +709,28 @@ struct fw_dif_context { * */ static inline void -qla24xx_set_t10dif_tags(struct scsi_cmnd *cmd, struct fw_dif_context *pkt, +qla24xx_set_t10dif_tags(srb_t *sp, struct fw_dif_context *pkt, unsigned int protcnt) { - struct sd_dif_tuple *spt; + struct scsi_cmnd *cmd = sp->cmd; scsi_qla_host_t *vha = shost_priv(cmd->device->host); - unsigned char op = scsi_get_prot_op(cmd); switch (scsi_get_prot_type(cmd)) { - /* For TYPE 0 protection: no checking */ case SCSI_PROT_DIF_TYPE0: - pkt->ref_tag_mask[0] = 0x00; - pkt->ref_tag_mask[1] = 0x00; - pkt->ref_tag_mask[2] = 0x00; - pkt->ref_tag_mask[3] = 0x00; + /* + * No check for ql2xenablehba_err_chk, as it would be an + * I/O error if hba tag generation is not done. + */ + pkt->ref_tag = cpu_to_le32((uint32_t) + (0xffffffff & scsi_get_lba(cmd))); + + if (!qla2x00_hba_err_chk_enabled(sp)) + break; + + pkt->ref_tag_mask[0] = 0xff; + pkt->ref_tag_mask[1] = 0xff; + pkt->ref_tag_mask[2] = 0xff; + pkt->ref_tag_mask[3] = 0xff; break; /* @@ -730,20 +738,16 @@ qla24xx_set_t10dif_tags(struct scsi_cmnd *cmd, struct fw_dif_context *pkt, * match LBA in CDB + N */ case SCSI_PROT_DIF_TYPE2: - if (!ql2xenablehba_err_chk) - break; - - if (scsi_prot_sg_count(cmd)) { - spt = page_address(sg_page(scsi_prot_sglist(cmd))) + - scsi_prot_sglist(cmd)[0].offset; - pkt->app_tag = swab32(spt->app_tag); - pkt->app_tag_mask[0] = 0xff; - pkt->app_tag_mask[1] = 0xff; - } + pkt->app_tag = __constant_cpu_to_le16(0); + pkt->app_tag_mask[0] = 0x0; + pkt->app_tag_mask[1] = 0x0; pkt->ref_tag = cpu_to_le32((uint32_t) (0xffffffff & scsi_get_lba(cmd))); + if (!qla2x00_hba_err_chk_enabled(sp)) + break; + /* enable ALL bytes of the ref tag */ pkt->ref_tag_mask[0] = 0xff; pkt->ref_tag_mask[1] = 0xff; @@ -763,26 +767,15 @@ qla24xx_set_t10dif_tags(struct scsi_cmnd *cmd, struct fw_dif_context *pkt, * 16 bit app tag. */ case SCSI_PROT_DIF_TYPE1: - if (!ql2xenablehba_err_chk) + pkt->ref_tag = cpu_to_le32((uint32_t) + (0xffffffff & scsi_get_lba(cmd))); + pkt->app_tag = __constant_cpu_to_le16(0); + pkt->app_tag_mask[0] = 0x0; + pkt->app_tag_mask[1] = 0x0; + + if (!qla2x00_hba_err_chk_enabled(sp)) break; - if (protcnt && (op == SCSI_PROT_WRITE_STRIP || - op == SCSI_PROT_WRITE_PASS)) { - spt = page_address(sg_page(scsi_prot_sglist(cmd))) + - scsi_prot_sglist(cmd)[0].offset; - ql_dbg(ql_dbg_io, vha, 0x3008, - "LBA from user %p, lba = 0x%x for cmd=%p.\n", - spt, (int)spt->ref_tag, cmd); - pkt->ref_tag = swab32(spt->ref_tag); - pkt->app_tag_mask[0] = 0x0; - pkt->app_tag_mask[1] = 0x0; - } else { - pkt->ref_tag = cpu_to_le32((uint32_t) - (0xffffffff & scsi_get_lba(cmd))); - pkt->app_tag = __constant_cpu_to_le16(0); - pkt->app_tag_mask[0] = 0x0; - pkt->app_tag_mask[1] = 0x0; - } /* enable ALL bytes of the ref tag */ pkt->ref_tag_mask[0] = 0xff; pkt->ref_tag_mask[1] = 0xff; @@ -798,8 +791,162 @@ qla24xx_set_t10dif_tags(struct scsi_cmnd *cmd, struct fw_dif_context *pkt, scsi_get_prot_type(cmd), cmd); } +struct qla2_sgx { + dma_addr_t dma_addr; /* OUT */ + uint32_t dma_len; /* OUT */ + + uint32_t tot_bytes; /* IN */ + struct scatterlist *cur_sg; /* IN */ + + /* for book keeping, bzero on initial invocation */ + uint32_t bytes_consumed; + uint32_t num_bytes; + uint32_t tot_partial; + + /* for debugging */ + uint32_t num_sg; + srb_t *sp; +}; static int +qla24xx_get_one_block_sg(uint32_t blk_sz, struct qla2_sgx *sgx, + uint32_t *partial) +{ + struct scatterlist *sg; + uint32_t cumulative_partial, sg_len; + dma_addr_t sg_dma_addr; + + if (sgx->num_bytes == sgx->tot_bytes) + return 0; + + sg = sgx->cur_sg; + cumulative_partial = sgx->tot_partial; + + sg_dma_addr = sg_dma_address(sg); + sg_len = sg_dma_len(sg); + + sgx->dma_addr = sg_dma_addr + sgx->bytes_consumed; + + if ((cumulative_partial + (sg_len - sgx->bytes_consumed)) >= blk_sz) { + sgx->dma_len = (blk_sz - cumulative_partial); + sgx->tot_partial = 0; + sgx->num_bytes += blk_sz; + *partial = 0; + } else { + sgx->dma_len = sg_len - sgx->bytes_consumed; + sgx->tot_partial += sgx->dma_len; + *partial = 1; + } + + sgx->bytes_consumed += sgx->dma_len; + + if (sg_len == sgx->bytes_consumed) { + sg = sg_next(sg); + sgx->num_sg++; + sgx->cur_sg = sg; + sgx->bytes_consumed = 0; + } + + return 1; +} + +static int +qla24xx_walk_and_build_sglist_no_difb(struct qla_hw_data *ha, srb_t *sp, + uint32_t *dsd, uint16_t tot_dsds) +{ + void *next_dsd; + uint8_t avail_dsds = 0; + uint32_t dsd_list_len; + struct dsd_dma *dsd_ptr; + struct scatterlist *sg_prot; + uint32_t *cur_dsd = dsd; + uint16_t used_dsds = tot_dsds; + + uint32_t prot_int; + uint32_t partial; + struct qla2_sgx sgx; + dma_addr_t sle_dma; + uint32_t sle_dma_len, tot_prot_dma_len = 0; + struct scsi_cmnd *cmd = sp->cmd; + + prot_int = cmd->device->sector_size; + + memset(&sgx, 0, sizeof(struct qla2_sgx)); + sgx.tot_bytes = scsi_bufflen(sp->cmd); + sgx.cur_sg = scsi_sglist(sp->cmd); + sgx.sp = sp; + + sg_prot = scsi_prot_sglist(sp->cmd); + + while (qla24xx_get_one_block_sg(prot_int, &sgx, &partial)) { + + sle_dma = sgx.dma_addr; + sle_dma_len = sgx.dma_len; +alloc_and_fill: + /* Allocate additional continuation packets? */ + if (avail_dsds == 0) { + avail_dsds = (used_dsds > QLA_DSDS_PER_IOCB) ? + QLA_DSDS_PER_IOCB : used_dsds; + dsd_list_len = (avail_dsds + 1) * 12; + used_dsds -= avail_dsds; + + /* allocate tracking DS */ + dsd_ptr = kzalloc(sizeof(struct dsd_dma), GFP_ATOMIC); + if (!dsd_ptr) + return 1; + + /* allocate new list */ + dsd_ptr->dsd_addr = next_dsd = + dma_pool_alloc(ha->dl_dma_pool, GFP_ATOMIC, + &dsd_ptr->dsd_list_dma); + + if (!next_dsd) { + /* + * Need to cleanup only this dsd_ptr, rest + * will be done by sp_free_dma() + */ + kfree(dsd_ptr); + return 1; + } + + list_add_tail(&dsd_ptr->list, + &((struct crc_context *)sp->ctx)->dsd_list); + + sp->flags |= SRB_CRC_CTX_DSD_VALID; + + /* add new list to cmd iocb or last list */ + *cur_dsd++ = cpu_to_le32(LSD(dsd_ptr->dsd_list_dma)); + *cur_dsd++ = cpu_to_le32(MSD(dsd_ptr->dsd_list_dma)); + *cur_dsd++ = dsd_list_len; + cur_dsd = (uint32_t *)next_dsd; + } + *cur_dsd++ = cpu_to_le32(LSD(sle_dma)); + *cur_dsd++ = cpu_to_le32(MSD(sle_dma)); + *cur_dsd++ = cpu_to_le32(sle_dma_len); + avail_dsds--; + + if (partial == 0) { + /* Got a full protection interval */ + sle_dma = sg_dma_address(sg_prot) + tot_prot_dma_len; + sle_dma_len = 8; + + tot_prot_dma_len += sle_dma_len; + if (tot_prot_dma_len == sg_dma_len(sg_prot)) { + tot_prot_dma_len = 0; + sg_prot = sg_next(sg_prot); + } + + partial = 1; /* So as to not re-enter this block */ + goto alloc_and_fill; + } + } + /* Null termination */ + *cur_dsd++ = 0; + *cur_dsd++ = 0; + *cur_dsd++ = 0; + return 0; +} +static int qla24xx_walk_and_build_sglist(struct qla_hw_data *ha, srb_t *sp, uint32_t *dsd, uint16_t tot_dsds) { @@ -981,7 +1128,7 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt, struct scsi_cmnd *cmd; struct scatterlist *cur_seg; int sgc; - uint32_t total_bytes; + uint32_t total_bytes = 0; uint32_t data_bytes; uint32_t dif_bytes; uint8_t bundling = 1; @@ -1023,8 +1170,10 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt, __constant_cpu_to_le16(CF_READ_DATA); } - tot_prot_dsds = scsi_prot_sg_count(cmd); - if (!tot_prot_dsds) + if ((scsi_get_prot_op(sp->cmd) == SCSI_PROT_READ_INSERT) || + (scsi_get_prot_op(sp->cmd) == SCSI_PROT_WRITE_STRIP) || + (scsi_get_prot_op(sp->cmd) == SCSI_PROT_READ_STRIP) || + (scsi_get_prot_op(sp->cmd) == SCSI_PROT_WRITE_INSERT)) bundling = 0; /* Allocate CRC context from global pool */ @@ -1047,7 +1196,7 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt, INIT_LIST_HEAD(&crc_ctx_pkt->dsd_list); - qla24xx_set_t10dif_tags(cmd, (struct fw_dif_context *) + qla24xx_set_t10dif_tags(sp, (struct fw_dif_context *) &crc_ctx_pkt->ref_tag, tot_prot_dsds); cmd_pkt->crc_context_address[0] = cpu_to_le32(LSD(crc_ctx_dma)); @@ -1076,7 +1225,6 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt, fcp_cmnd->additional_cdb_len |= 2; int_to_scsilun(sp->cmd->device->lun, &fcp_cmnd->lun); - host_to_fcp_swap((uint8_t *)&fcp_cmnd->lun, sizeof(fcp_cmnd->lun)); memcpy(fcp_cmnd->cdb, cmd->cmnd, cmd->cmd_len); cmd_pkt->fcp_cmnd_dseg_len = cpu_to_le16(fcp_cmnd_len); cmd_pkt->fcp_cmnd_dseg_address[0] = cpu_to_le32( @@ -1107,15 +1255,28 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt, cmd_pkt->fcp_rsp_dseg_len = 0; /* Let response come in status iocb */ /* Compute dif len and adjust data len to incude protection */ - total_bytes = data_bytes; dif_bytes = 0; blk_size = cmd->device->sector_size; - if (scsi_get_prot_op(cmd) != SCSI_PROT_NORMAL) { - dif_bytes = (data_bytes / blk_size) * 8; - total_bytes += dif_bytes; + dif_bytes = (data_bytes / blk_size) * 8; + + switch (scsi_get_prot_op(sp->cmd)) { + case SCSI_PROT_READ_INSERT: + case SCSI_PROT_WRITE_STRIP: + total_bytes = data_bytes; + data_bytes += dif_bytes; + break; + + case SCSI_PROT_READ_STRIP: + case SCSI_PROT_WRITE_INSERT: + case SCSI_PROT_READ_PASS: + case SCSI_PROT_WRITE_PASS: + total_bytes = data_bytes + dif_bytes; + break; + default: + BUG(); } - if (!ql2xenablehba_err_chk) + if (!qla2x00_hba_err_chk_enabled(sp)) fw_prot_opts |= 0x10; /* Disable Guard tag checking */ if (!bundling) { @@ -1151,7 +1312,12 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt, cmd_pkt->control_flags |= __constant_cpu_to_le16(CF_DATA_SEG_DESCR_ENABLE); - if (qla24xx_walk_and_build_sglist(ha, sp, cur_dsd, + + if (!bundling && tot_prot_dsds) { + if (qla24xx_walk_and_build_sglist_no_difb(ha, sp, + cur_dsd, tot_dsds)) + goto crc_queuing_error; + } else if (qla24xx_walk_and_build_sglist(ha, sp, cur_dsd, (tot_dsds - tot_prot_dsds))) goto crc_queuing_error; @@ -1414,6 +1580,22 @@ qla24xx_dif_start_scsi(srb_t *sp) goto queuing_error; else sp->flags |= SRB_DMA_VALID; + + if ((scsi_get_prot_op(cmd) == SCSI_PROT_READ_INSERT) || + (scsi_get_prot_op(cmd) == SCSI_PROT_WRITE_STRIP)) { + struct qla2_sgx sgx; + uint32_t partial; + + memset(&sgx, 0, sizeof(struct qla2_sgx)); + sgx.tot_bytes = scsi_bufflen(cmd); + sgx.cur_sg = scsi_sglist(cmd); + sgx.sp = sp; + + nseg = 0; + while (qla24xx_get_one_block_sg( + cmd->device->sector_size, &sgx, &partial)) + nseg++; + } } else nseg = 0; @@ -1428,6 +1610,11 @@ qla24xx_dif_start_scsi(srb_t *sp) goto queuing_error; else sp->flags |= SRB_CRC_PROT_DMA_VALID; + + if ((scsi_get_prot_op(cmd) == SCSI_PROT_READ_INSERT) || + (scsi_get_prot_op(cmd) == SCSI_PROT_WRITE_STRIP)) { + nseg = scsi_bufflen(cmd) / cmd->device->sector_size; + } } else { nseg = 0; } @@ -1454,6 +1641,7 @@ qla24xx_dif_start_scsi(srb_t *sp) /* Build header part of command packet (excluding the OPCODE). */ req->current_outstanding_cmd = handle; req->outstanding_cmds[handle] = sp; + sp->handle = handle; sp->cmd->host_scribble = (unsigned char *)(unsigned long)handle; req->cnt -= req_cnt; diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index b16b7725dee..8a7591f035e 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -719,7 +719,6 @@ skip_rio: vha->flags.rscn_queue_overflow = 1; } - atomic_set(&vha->loop_state, LOOP_UPDATE); atomic_set(&vha->loop_down_timer, 0); vha->flags.management_server_logged_in = 0; @@ -1435,25 +1434,27 @@ struct scsi_dif_tuple { * ASC/ASCQ fields in the sense buffer with ILLEGAL_REQUEST * to indicate to the kernel that the HBA detected error. */ -static inline void +static inline int qla2x00_handle_dif_error(srb_t *sp, struct sts_entry_24xx *sts24) { struct scsi_qla_host *vha = sp->fcport->vha; struct scsi_cmnd *cmd = sp->cmd; - struct scsi_dif_tuple *ep = - (struct scsi_dif_tuple *)&sts24->data[20]; - struct scsi_dif_tuple *ap = - (struct scsi_dif_tuple *)&sts24->data[12]; + uint8_t *ap = &sts24->data[12]; + uint8_t *ep = &sts24->data[20]; uint32_t e_ref_tag, a_ref_tag; uint16_t e_app_tag, a_app_tag; uint16_t e_guard, a_guard; - e_ref_tag = be32_to_cpu(ep->ref_tag); - a_ref_tag = be32_to_cpu(ap->ref_tag); - e_app_tag = be16_to_cpu(ep->app_tag); - a_app_tag = be16_to_cpu(ap->app_tag); - e_guard = be16_to_cpu(ep->guard); - a_guard = be16_to_cpu(ap->guard); + /* + * swab32 of the "data" field in the beginning of qla2x00_status_entry() + * would make guard field appear at offset 2 + */ + a_guard = le16_to_cpu(*(uint16_t *)(ap + 2)); + a_app_tag = le16_to_cpu(*(uint16_t *)(ap + 0)); + a_ref_tag = le32_to_cpu(*(uint32_t *)(ap + 4)); + e_guard = le16_to_cpu(*(uint16_t *)(ep + 2)); + e_app_tag = le16_to_cpu(*(uint16_t *)(ep + 0)); + e_ref_tag = le32_to_cpu(*(uint32_t *)(ep + 4)); ql_dbg(ql_dbg_io, vha, 0x3023, "iocb(s) %p Returned STATUS.\n", sts24); @@ -1465,6 +1466,63 @@ qla2x00_handle_dif_error(srb_t *sp, struct sts_entry_24xx *sts24) cmd->cmnd[0], (u64)scsi_get_lba(cmd), a_ref_tag, e_ref_tag, a_app_tag, e_app_tag, a_guard, e_guard); + /* + * Ignore sector if: + * For type 3: ref & app tag is all 'f's + * For type 0,1,2: app tag is all 'f's + */ + if ((a_app_tag == 0xffff) && + ((scsi_get_prot_type(cmd) != SCSI_PROT_DIF_TYPE3) || + (a_ref_tag == 0xffffffff))) { + uint32_t blocks_done, resid; + sector_t lba_s = scsi_get_lba(cmd); + + /* 2TB boundary case covered automatically with this */ + blocks_done = e_ref_tag - (uint32_t)lba_s + 1; + + resid = scsi_bufflen(cmd) - (blocks_done * + cmd->device->sector_size); + + scsi_set_resid(cmd, resid); + cmd->result = DID_OK << 16; + + /* Update protection tag */ + if (scsi_prot_sg_count(cmd)) { + uint32_t i, j = 0, k = 0, num_ent; + struct scatterlist *sg; + struct sd_dif_tuple *spt; + + /* Patch the corresponding protection tags */ + scsi_for_each_prot_sg(cmd, sg, + scsi_prot_sg_count(cmd), i) { + num_ent = sg_dma_len(sg) / 8; + if (k + num_ent < blocks_done) { + k += num_ent; + continue; + } + j = blocks_done - k - 1; + k = blocks_done; + break; + } + + if (k != blocks_done) { + qla_printk(KERN_WARNING, sp->fcport->vha->hw, + "unexpected tag values tag:lba=%x:%llx)\n", + e_ref_tag, (unsigned long long)lba_s); + return 1; + } + + spt = page_address(sg_page(sg)) + sg->offset; + spt += j; + + spt->app_tag = 0xffff; + if (scsi_get_prot_type(cmd) == SCSI_PROT_DIF_TYPE3) + spt->ref_tag = 0xffffffff; + } + + return 0; + } + /* check guard */ if (e_guard != a_guard) { scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST, @@ -1472,28 +1530,30 @@ qla2x00_handle_dif_error(srb_t *sp, struct sts_entry_24xx *sts24) set_driver_byte(cmd, DRIVER_SENSE); set_host_byte(cmd, DID_ABORT); cmd->result |= SAM_STAT_CHECK_CONDITION << 1; - return; + return 1; } - /* check appl tag */ - if (e_app_tag != a_app_tag) { + /* check ref tag */ + if (e_ref_tag != a_ref_tag) { scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST, - 0x10, 0x2); + 0x10, 0x3); set_driver_byte(cmd, DRIVER_SENSE); set_host_byte(cmd, DID_ABORT); cmd->result |= SAM_STAT_CHECK_CONDITION << 1; - return; + return 1; } - /* check ref tag */ - if (e_ref_tag != a_ref_tag) { + /* check appl tag */ + if (e_app_tag != a_app_tag) { scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST, - 0x10, 0x3); + 0x10, 0x2); set_driver_byte(cmd, DRIVER_SENSE); set_host_byte(cmd, DID_ABORT); cmd->result |= SAM_STAT_CHECK_CONDITION << 1; - return; + return 1; } + + return 1; } /** @@ -1767,7 +1827,7 @@ check_scsi_status: break; case CS_DIF_ERROR: - qla2x00_handle_dif_error(sp, sts24); + logit = qla2x00_handle_dif_error(sp, sts24); break; default: cp->result = DID_ERROR << 16; @@ -2468,11 +2528,10 @@ qla2x00_request_irqs(struct qla_hw_data *ha, struct rsp_que *rsp) goto skip_msi; } - if (IS_QLA2432(ha) && (ha->pdev->revision < QLA_MSIX_CHIP_REV_24XX || - !QLA_MSIX_FW_MODE_1(ha->fw_attributes))) { + if (IS_QLA2432(ha) && (ha->pdev->revision < QLA_MSIX_CHIP_REV_24XX)) { ql_log(ql_log_warn, vha, 0x0035, "MSI-X; Unsupported ISP2432 (0x%X, 0x%X).\n", - ha->pdev->revision, ha->fw_attributes); + ha->pdev->revision, QLA_MSIX_CHIP_REV_24XX); goto skip_msix; } diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c index c706ed37000..f488cc69fc7 100644 --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -472,7 +472,7 @@ qla24xx_create_vhost(struct fc_vport *fc_vport) host->can_queue = base_vha->req->length + 128; host->this_id = 255; host->cmd_per_lun = 3; - if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif) + if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) host->max_cmd_len = 32; else host->max_cmd_len = MAX_CMDSZ; diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c index 5cbf33a50b1..049807cda41 100644 --- a/drivers/scsi/qla2xxx/qla_nx.c +++ b/drivers/scsi/qla2xxx/qla_nx.c @@ -2208,6 +2208,7 @@ qla82xx_msix_rsp_q(int irq, void *dev_id) struct qla_hw_data *ha; struct rsp_que *rsp; struct device_reg_82xx __iomem *reg; + unsigned long flags; rsp = (struct rsp_que *) dev_id; if (!rsp) { @@ -2218,11 +2219,11 @@ qla82xx_msix_rsp_q(int irq, void *dev_id) ha = rsp->hw; reg = &ha->iobase->isp82; - spin_lock_irq(&ha->hardware_lock); + spin_lock_irqsave(&ha->hardware_lock, flags); vha = pci_get_drvdata(ha->pdev); qla24xx_process_response_queue(vha, rsp); WRT_REG_DWORD(®->host_int, 0); - spin_unlock_irq(&ha->hardware_lock); + spin_unlock_irqrestore(&ha->hardware_lock, flags); return IRQ_HANDLED; } @@ -2838,6 +2839,16 @@ sufficient_dsds: int_to_scsilun(sp->cmd->device->lun, &cmd_pkt->lun); host_to_fcp_swap((uint8_t *)&cmd_pkt->lun, sizeof(cmd_pkt->lun)); + /* build FCP_CMND IU */ + memset(ctx->fcp_cmnd, 0, sizeof(struct fcp_cmnd)); + int_to_scsilun(sp->cmd->device->lun, &ctx->fcp_cmnd->lun); + ctx->fcp_cmnd->additional_cdb_len = additional_cdb_len; + + if (cmd->sc_data_direction == DMA_TO_DEVICE) + ctx->fcp_cmnd->additional_cdb_len |= 1; + else if (cmd->sc_data_direction == DMA_FROM_DEVICE) + ctx->fcp_cmnd->additional_cdb_len |= 2; + /* * Update tagged queuing modifier -- default is TSK_SIMPLE (0). */ @@ -2854,16 +2865,6 @@ sufficient_dsds: } } - /* build FCP_CMND IU */ - memset(ctx->fcp_cmnd, 0, sizeof(struct fcp_cmnd)); - int_to_scsilun(sp->cmd->device->lun, &ctx->fcp_cmnd->lun); - ctx->fcp_cmnd->additional_cdb_len = additional_cdb_len; - - if (cmd->sc_data_direction == DMA_TO_DEVICE) - ctx->fcp_cmnd->additional_cdb_len |= 1; - else if (cmd->sc_data_direction == DMA_FROM_DEVICE) - ctx->fcp_cmnd->additional_cdb_len |= 2; - memcpy(ctx->fcp_cmnd->cdb, cmd->cmnd, cmd->cmd_len); fcp_dl = (uint32_t *)(ctx->fcp_cmnd->cdb + 16 + diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index e02df276804..4cace3f20c0 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -106,17 +106,21 @@ MODULE_PARM_DESC(ql2xmaxqdepth, "Maximum queue depth to report for target devices."); /* Do not change the value of this after module load */ -int ql2xenabledif = 1; +int ql2xenabledif = 0; module_param(ql2xenabledif, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ql2xenabledif, " Enable T10-CRC-DIF " - " Default is 0 - No DIF Support. 1 - Enable it"); + " Default is 0 - No DIF Support. 1 - Enable it" + ", 2 - Enable DIF for all types, except Type 0."); -int ql2xenablehba_err_chk; +int ql2xenablehba_err_chk = 2; module_param(ql2xenablehba_err_chk, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ql2xenablehba_err_chk, - " Enable T10-CRC-DIF Error isolation by HBA" - " Default is 0 - Error isolation disabled, 1 - Enable it"); + " Enable T10-CRC-DIF Error isolation by HBA:\n" + " Default is 1.\n" + " 0 -- Error isolation disabled\n" + " 1 -- Error isolation enabled only for DIX Type 0\n" + " 2 -- Error isolation enabled for all Types\n"); int ql2xiidmaenable=1; module_param(ql2xiidmaenable, int, S_IRUGO); @@ -909,7 +913,14 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) "Abort command mbx success.\n"); wait = 1; } + + spin_lock_irqsave(&ha->hardware_lock, flags); qla2x00_sp_compl(ha, sp); + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + /* Did the command return during mailbox execution? */ + if (ret == FAILED && !CMD_SP(cmd)) + ret = SUCCESS; /* Wait for the command to be returned. */ if (wait) { @@ -2251,7 +2262,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) host->this_id = 255; host->cmd_per_lun = 3; host->unique_id = host->host_no; - if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif) + if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) host->max_cmd_len = 32; else host->max_cmd_len = MAX_CMDSZ; @@ -2378,13 +2389,16 @@ skip_dpc: "Detected hba at address=%p.\n", ha); - if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif) { + if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) { if (ha->fw_attributes & BIT_4) { + int prot = 0; base_vha->flags.difdix_supported = 1; ql_dbg(ql_dbg_init, base_vha, 0x00f1, "Registering for DIF/DIX type 1 and 3 protection.\n"); + if (ql2xenabledif == 1) + prot = SHOST_DIX_TYPE0_PROTECTION; scsi_host_set_prot(host, - SHOST_DIF_TYPE1_PROTECTION + prot | SHOST_DIF_TYPE1_PROTECTION | SHOST_DIF_TYPE2_PROTECTION | SHOST_DIF_TYPE3_PROTECTION | SHOST_DIX_TYPE1_PROTECTION diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index 062c97bf62f..13b6357c1fa 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.03.07.03-k" +#define QLA2XXX_VERSION "8.03.07.07-k" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 3 diff --git a/drivers/scsi/qla4xxx/Kconfig b/drivers/scsi/qla4xxx/Kconfig index 2c33ce6eac1..0f5599e0abf 100644 --- a/drivers/scsi/qla4xxx/Kconfig +++ b/drivers/scsi/qla4xxx/Kconfig @@ -1,6 +1,6 @@ config SCSI_QLA_ISCSI tristate "QLogic ISP4XXX and ISP82XX host adapter family support" - depends on PCI && SCSI + depends on PCI && SCSI && NET select SCSI_ISCSI_ATTRS ---help--- This driver supports the QLogic 40xx (ISP4XXX) and 8022 (ISP82XX) diff --git a/drivers/sh/intc/chip.c b/drivers/sh/intc/chip.c index f33e2dd9793..33b2ed451e0 100644 --- a/drivers/sh/intc/chip.c +++ b/drivers/sh/intc/chip.c @@ -186,6 +186,9 @@ static unsigned char intc_irq_sense_table[IRQ_TYPE_SENSE_MASK + 1] = { !defined(CONFIG_CPU_SUBTYPE_SH7709) [IRQ_TYPE_LEVEL_HIGH] = VALID(3), #endif +#if defined(CONFIG_ARCH_SH7372) + [IRQ_TYPE_EDGE_BOTH] = VALID(4), +#endif }; static int intc_set_type(struct irq_data *data, unsigned int type) diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c index d2407558773..24cacff5778 100644 --- a/drivers/spi/spi-fsl-spi.c +++ b/drivers/spi/spi-fsl-spi.c @@ -825,6 +825,9 @@ static void fsl_spi_cpm_free(struct mpc8xxx_spi *mspi) { struct device *dev = mspi->dev; + if (!(mspi->flags & SPI_CPM_MODE)) + return; + dma_unmap_single(dev, mspi->dma_dummy_rx, SPI_MRBLR, DMA_FROM_DEVICE); dma_unmap_single(dev, mspi->dma_dummy_tx, PAGE_SIZE, DMA_TO_DEVICE); cpm_muram_free(cpm_muram_offset(mspi->tx_bd)); diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 8ac6542aedc..fa594d604ac 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -786,9 +786,11 @@ static int __devinit spi_imx_probe(struct platform_device *pdev) int cs_gpio = of_get_named_gpio(np, "cs-gpios", i); if (cs_gpio < 0) cs_gpio = mxc_platform_info->chipselect[i]; + + spi_imx->chipselect[i] = cs_gpio; if (cs_gpio < 0) continue; - spi_imx->chipselect[i] = cs_gpio; + ret = gpio_request(spi_imx->chipselect[i], DRIVER_NAME); if (ret) { while (i > 0) { diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index 595dacc7645..019a7163572 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -131,6 +131,12 @@ #define RXBUSY (1<<2) #define TXBUSY (1<<3) +struct s3c64xx_spi_dma_data { + unsigned ch; + enum dma_data_direction direction; + enum dma_ch dmach; +}; + /** * struct s3c64xx_spi_driver_data - Runtime info holder for SPI driver. * @clk: Pointer to the spi clock. @@ -164,13 +170,14 @@ struct s3c64xx_spi_driver_data { struct work_struct work; struct list_head queue; spinlock_t lock; - enum dma_ch rx_dmach; - enum dma_ch tx_dmach; unsigned long sfr_start; struct completion xfer_completion; unsigned state; unsigned cur_mode, cur_bpw; unsigned cur_speed; + struct s3c64xx_spi_dma_data rx_dma; + struct s3c64xx_spi_dma_data tx_dma; + struct samsung_dma_ops *ops; }; static struct s3c2410_dma_client s3c64xx_spi_dma_client = { @@ -226,6 +233,78 @@ static void flush_fifo(struct s3c64xx_spi_driver_data *sdd) writel(val, regs + S3C64XX_SPI_CH_CFG); } +static void s3c64xx_spi_dmacb(void *data) +{ + struct s3c64xx_spi_driver_data *sdd; + struct s3c64xx_spi_dma_data *dma = data; + unsigned long flags; + + if (dma->direction == DMA_FROM_DEVICE) + sdd = container_of(data, + struct s3c64xx_spi_driver_data, rx_dma); + else + sdd = container_of(data, + struct s3c64xx_spi_driver_data, tx_dma); + + spin_lock_irqsave(&sdd->lock, flags); + + if (dma->direction == DMA_FROM_DEVICE) { + sdd->state &= ~RXBUSY; + if (!(sdd->state & TXBUSY)) + complete(&sdd->xfer_completion); + } else { + sdd->state &= ~TXBUSY; + if (!(sdd->state & RXBUSY)) + complete(&sdd->xfer_completion); + } + + spin_unlock_irqrestore(&sdd->lock, flags); +} + +static void prepare_dma(struct s3c64xx_spi_dma_data *dma, + unsigned len, dma_addr_t buf) +{ + struct s3c64xx_spi_driver_data *sdd; + struct samsung_dma_prep_info info; + + if (dma->direction == DMA_FROM_DEVICE) + sdd = container_of((void *)dma, + struct s3c64xx_spi_driver_data, rx_dma); + else + sdd = container_of((void *)dma, + struct s3c64xx_spi_driver_data, tx_dma); + + info.cap = DMA_SLAVE; + info.len = len; + info.fp = s3c64xx_spi_dmacb; + info.fp_param = dma; + info.direction = dma->direction; + info.buf = buf; + + sdd->ops->prepare(dma->ch, &info); + sdd->ops->trigger(dma->ch); +} + +static int acquire_dma(struct s3c64xx_spi_driver_data *sdd) +{ + struct samsung_dma_info info; + + sdd->ops = samsung_dma_get_ops(); + + info.cap = DMA_SLAVE; + info.client = &s3c64xx_spi_dma_client; + info.width = sdd->cur_bpw / 8; + + info.direction = sdd->rx_dma.direction; + info.fifo = sdd->sfr_start + S3C64XX_SPI_RX_DATA; + sdd->rx_dma.ch = sdd->ops->request(sdd->rx_dma.dmach, &info); + info.direction = sdd->tx_dma.direction; + info.fifo = sdd->sfr_start + S3C64XX_SPI_TX_DATA; + sdd->tx_dma.ch = sdd->ops->request(sdd->tx_dma.dmach, &info); + + return 1; +} + static void enable_datapath(struct s3c64xx_spi_driver_data *sdd, struct spi_device *spi, struct spi_transfer *xfer, int dma_mode) @@ -258,10 +337,7 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd, chcfg |= S3C64XX_SPI_CH_TXCH_ON; if (dma_mode) { modecfg |= S3C64XX_SPI_MODE_TXDMA_ON; - s3c2410_dma_config(sdd->tx_dmach, sdd->cur_bpw / 8); - s3c2410_dma_enqueue(sdd->tx_dmach, (void *)sdd, - xfer->tx_dma, xfer->len); - s3c2410_dma_ctrl(sdd->tx_dmach, S3C2410_DMAOP_START); + prepare_dma(&sdd->tx_dma, xfer->len, xfer->tx_dma); } else { switch (sdd->cur_bpw) { case 32: @@ -293,10 +369,7 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd, writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff) | S3C64XX_SPI_PACKET_CNT_EN, regs + S3C64XX_SPI_PACKET_CNT); - s3c2410_dma_config(sdd->rx_dmach, sdd->cur_bpw / 8); - s3c2410_dma_enqueue(sdd->rx_dmach, (void *)sdd, - xfer->rx_dma, xfer->len); - s3c2410_dma_ctrl(sdd->rx_dmach, S3C2410_DMAOP_START); + prepare_dma(&sdd->rx_dma, xfer->len, xfer->rx_dma); } } @@ -482,46 +555,6 @@ static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd) } } -static void s3c64xx_spi_dma_rxcb(struct s3c2410_dma_chan *chan, void *buf_id, - int size, enum s3c2410_dma_buffresult res) -{ - struct s3c64xx_spi_driver_data *sdd = buf_id; - unsigned long flags; - - spin_lock_irqsave(&sdd->lock, flags); - - if (res == S3C2410_RES_OK) - sdd->state &= ~RXBUSY; - else - dev_err(&sdd->pdev->dev, "DmaAbrtRx-%d\n", size); - - /* If the other done */ - if (!(sdd->state & TXBUSY)) - complete(&sdd->xfer_completion); - - spin_unlock_irqrestore(&sdd->lock, flags); -} - -static void s3c64xx_spi_dma_txcb(struct s3c2410_dma_chan *chan, void *buf_id, - int size, enum s3c2410_dma_buffresult res) -{ - struct s3c64xx_spi_driver_data *sdd = buf_id; - unsigned long flags; - - spin_lock_irqsave(&sdd->lock, flags); - - if (res == S3C2410_RES_OK) - sdd->state &= ~TXBUSY; - else - dev_err(&sdd->pdev->dev, "DmaAbrtTx-%d \n", size); - - /* If the other done */ - if (!(sdd->state & RXBUSY)) - complete(&sdd->xfer_completion); - - spin_unlock_irqrestore(&sdd->lock, flags); -} - #define XFER_DMAADDR_INVALID DMA_BIT_MASK(32) static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd, @@ -696,12 +729,10 @@ static void handle_msg(struct s3c64xx_spi_driver_data *sdd, if (use_dma) { if (xfer->tx_buf != NULL && (sdd->state & TXBUSY)) - s3c2410_dma_ctrl(sdd->tx_dmach, - S3C2410_DMAOP_FLUSH); + sdd->ops->stop(sdd->tx_dma.ch); if (xfer->rx_buf != NULL && (sdd->state & RXBUSY)) - s3c2410_dma_ctrl(sdd->rx_dmach, - S3C2410_DMAOP_FLUSH); + sdd->ops->stop(sdd->rx_dma.ch); } goto out; @@ -739,30 +770,6 @@ out: msg->complete(msg->context); } -static int acquire_dma(struct s3c64xx_spi_driver_data *sdd) -{ - if (s3c2410_dma_request(sdd->rx_dmach, - &s3c64xx_spi_dma_client, NULL) < 0) { - dev_err(&sdd->pdev->dev, "cannot get RxDMA\n"); - return 0; - } - s3c2410_dma_set_buffdone_fn(sdd->rx_dmach, s3c64xx_spi_dma_rxcb); - s3c2410_dma_devconfig(sdd->rx_dmach, S3C2410_DMASRC_HW, - sdd->sfr_start + S3C64XX_SPI_RX_DATA); - - if (s3c2410_dma_request(sdd->tx_dmach, - &s3c64xx_spi_dma_client, NULL) < 0) { - dev_err(&sdd->pdev->dev, "cannot get TxDMA\n"); - s3c2410_dma_free(sdd->rx_dmach, &s3c64xx_spi_dma_client); - return 0; - } - s3c2410_dma_set_buffdone_fn(sdd->tx_dmach, s3c64xx_spi_dma_txcb); - s3c2410_dma_devconfig(sdd->tx_dmach, S3C2410_DMASRC_MEM, - sdd->sfr_start + S3C64XX_SPI_TX_DATA); - - return 1; -} - static void s3c64xx_spi_work(struct work_struct *work) { struct s3c64xx_spi_driver_data *sdd = container_of(work, @@ -799,8 +806,8 @@ static void s3c64xx_spi_work(struct work_struct *work) spin_unlock_irqrestore(&sdd->lock, flags); /* Free DMA channels */ - s3c2410_dma_free(sdd->tx_dmach, &s3c64xx_spi_dma_client); - s3c2410_dma_free(sdd->rx_dmach, &s3c64xx_spi_dma_client); + sdd->ops->release(sdd->rx_dma.ch, &s3c64xx_spi_dma_client); + sdd->ops->release(sdd->tx_dma.ch, &s3c64xx_spi_dma_client); } static int s3c64xx_spi_transfer(struct spi_device *spi, @@ -1017,8 +1024,10 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev) sdd->cntrlr_info = sci; sdd->pdev = pdev; sdd->sfr_start = mem_res->start; - sdd->tx_dmach = dmatx_res->start; - sdd->rx_dmach = dmarx_res->start; + sdd->tx_dma.dmach = dmatx_res->start; + sdd->tx_dma.direction = DMA_TO_DEVICE; + sdd->rx_dma.dmach = dmarx_res->start; + sdd->rx_dma.direction = DMA_FROM_DEVICE; sdd->cur_bpw = 8; @@ -1106,7 +1115,7 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev) pdev->id, master->num_chipselect); dev_dbg(&pdev->dev, "\tIOmem=[0x%x-0x%x]\tDMA=[Rx-%d, Tx-%d]\n", mem_res->end, mem_res->start, - sdd->rx_dmach, sdd->tx_dmach); + sdd->rx_dma.dmach, sdd->tx_dma.dmach); return 0; diff --git a/drivers/staging/brcm80211/brcmsmac/otp.c b/drivers/staging/brcm80211/brcmsmac/otp.c index 34253cf3781..4a70180eba5 100644 --- a/drivers/staging/brcm80211/brcmsmac/otp.c +++ b/drivers/staging/brcm80211/brcmsmac/otp.c @@ -16,6 +16,7 @@ #include <linux/io.h> #include <linux/errno.h> +#include <linux/string.h> #include <brcm_hw_ids.h> #include <chipcommon.h> diff --git a/drivers/staging/brcm80211/brcmsmac/types.h b/drivers/staging/brcm80211/brcmsmac/types.h index bbf21897ae0..823b5e4672e 100644 --- a/drivers/staging/brcm80211/brcmsmac/types.h +++ b/drivers/staging/brcm80211/brcmsmac/types.h @@ -18,6 +18,7 @@ #define _BRCM_TYPES_H_ #include <linux/types.h> +#include <linux/io.h> /* Bus types */ #define SI_BUS 0 /* SOC Interconnect */ diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c index 6859af0778c..7611def97d0 100644 --- a/drivers/staging/comedi/drivers/ni_labpc.c +++ b/drivers/staging/comedi/drivers/ni_labpc.c @@ -241,8 +241,10 @@ static int labpc_eeprom_write_insn(struct comedi_device *dev, struct comedi_insn *insn, unsigned int *data); static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd); -#ifdef CONFIG_COMEDI_PCI +#ifdef CONFIG_ISA_DMA_API static unsigned int labpc_suggest_transfer_size(struct comedi_cmd cmd); +#endif +#ifdef CONFIG_COMEDI_PCI static int labpc_find_device(struct comedi_device *dev, int bus, int slot); #endif static int labpc_dio_mem_callback(int dir, int port, int data, diff --git a/drivers/staging/octeon/ethernet-rgmii.c b/drivers/staging/octeon/ethernet-rgmii.c index 9c0d2936e48..c3d73f8431a 100644 --- a/drivers/staging/octeon/ethernet-rgmii.c +++ b/drivers/staging/octeon/ethernet-rgmii.c @@ -26,6 +26,7 @@ **********************************************************************/ #include <linux/kernel.h> #include <linux/netdevice.h> +#include <linux/interrupt.h> #include <linux/phy.h> #include <linux/ratelimit.h> #include <net/dst.h> diff --git a/drivers/staging/octeon/ethernet-spi.c b/drivers/staging/octeon/ethernet-spi.c index 97082542188..d0e2d514968 100644 --- a/drivers/staging/octeon/ethernet-spi.c +++ b/drivers/staging/octeon/ethernet-spi.c @@ -26,6 +26,7 @@ **********************************************************************/ #include <linux/kernel.h> #include <linux/netdevice.h> +#include <linux/interrupt.h> #include <net/dst.h> #include <asm/octeon/octeon.h> diff --git a/drivers/staging/tidspbridge/core/dsp-clock.c b/drivers/staging/tidspbridge/core/dsp-clock.c index 589a0554332..3d1279c424a 100644 --- a/drivers/staging/tidspbridge/core/dsp-clock.c +++ b/drivers/staging/tidspbridge/core/dsp-clock.c @@ -209,7 +209,6 @@ int dsp_clk_enable(enum dsp_clk_id clk_id) break; #ifdef CONFIG_OMAP_MCBSP case MCBSP_CLK: - omap_mcbsp_set_io_type(MCBSP_ID(clk_id), OMAP_MCBSP_POLL_IO); omap_mcbsp_request(MCBSP_ID(clk_id)); omap2_mcbsp_set_clks_src(MCBSP_ID(clk_id), MCBSP_CLKS_PAD_SRC); break; diff --git a/drivers/staging/zcache/tmem.c b/drivers/staging/zcache/tmem.c index 975e34bcd72..1ca66ea9b28 100644 --- a/drivers/staging/zcache/tmem.c +++ b/drivers/staging/zcache/tmem.c @@ -604,7 +604,7 @@ int tmem_get(struct tmem_pool *pool, struct tmem_oid *oidp, uint32_t index, struct tmem_obj *obj; void *pampd; bool ephemeral = is_ephemeral(pool); - uint32_t ret = -1; + int ret = -1; struct tmem_hashbucket *hb; bool free = (get_and_free == 1) || ((get_and_free == 0) && ephemeral); bool lock_held = false; diff --git a/drivers/staging/zcache/zcache-main.c b/drivers/staging/zcache/zcache-main.c index 855a5bb56a4..462fbc20561 100644 --- a/drivers/staging/zcache/zcache-main.c +++ b/drivers/staging/zcache/zcache-main.c @@ -1158,7 +1158,7 @@ static void *zcache_pampd_create(char *data, size_t size, bool raw, int eph, size_t clen; int ret; unsigned long count; - struct page *page = virt_to_page(data); + struct page *page = (struct page *)(data); struct zcache_client *cli = pool->client; uint16_t client_id = get_client_id_from_client(cli); unsigned long zv_mean_zsize; @@ -1227,7 +1227,7 @@ static int zcache_pampd_get_data(char *data, size_t *bufsize, bool raw, int ret = 0; BUG_ON(is_ephemeral(pool)); - zv_decompress(virt_to_page(data), pampd); + zv_decompress((struct page *)(data), pampd); return ret; } @@ -1242,7 +1242,7 @@ static int zcache_pampd_get_data_and_free(char *data, size_t *bufsize, bool raw, int ret = 0; BUG_ON(!is_ephemeral(pool)); - zbud_decompress(virt_to_page(data), pampd); + zbud_decompress((struct page *)(data), pampd); zbud_free_and_delist((struct zbud_hdr *)pampd); atomic_dec(&zcache_curr_eph_pampd_count); return ret; @@ -1539,7 +1539,7 @@ static int zcache_put_page(int cli_id, int pool_id, struct tmem_oid *oidp, goto out; if (!zcache_freeze && zcache_do_preload(pool) == 0) { /* preload does preempt_disable on success */ - ret = tmem_put(pool, oidp, index, page_address(page), + ret = tmem_put(pool, oidp, index, (char *)(page), PAGE_SIZE, 0, is_ephemeral(pool)); if (ret < 0) { if (is_ephemeral(pool)) @@ -1572,7 +1572,7 @@ static int zcache_get_page(int cli_id, int pool_id, struct tmem_oid *oidp, pool = zcache_get_pool_by_id(cli_id, pool_id); if (likely(pool != NULL)) { if (atomic_read(&pool->obj_count) > 0) - ret = tmem_get(pool, oidp, index, page_address(page), + ret = tmem_get(pool, oidp, index, (char *)(page), &size, 0, is_ephemeral(pool)); zcache_put_pool(pool); } diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index c24fb10de60..6a4ea29c2f3 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -2243,7 +2243,6 @@ static int iscsit_handle_snack( case 0: return iscsit_handle_recovery_datain_or_r2t(conn, buf, hdr->itt, hdr->ttt, hdr->begrun, hdr->runlength); - return 0; case ISCSI_FLAG_SNACK_TYPE_STATUS: return iscsit_handle_status_snack(conn, hdr->itt, hdr->ttt, hdr->begrun, hdr->runlength); diff --git a/drivers/target/iscsi/iscsi_target_configfs.c b/drivers/target/iscsi/iscsi_target_configfs.c index f095e65b1cc..f1643dbf6a9 100644 --- a/drivers/target/iscsi/iscsi_target_configfs.c +++ b/drivers/target/iscsi/iscsi_target_configfs.c @@ -268,7 +268,7 @@ struct se_tpg_np *lio_target_call_addnptotpg( ISCSI_TCP); if (IS_ERR(tpg_np)) { iscsit_put_tpg(tpg); - return ERR_PTR(PTR_ERR(tpg_np)); + return ERR_CAST(tpg_np); } pr_debug("LIO_Target_ConfigFS: addnptotpg done!\n"); @@ -1285,7 +1285,7 @@ struct se_wwn *lio_target_call_coreaddtiqn( tiqn = iscsit_add_tiqn((unsigned char *)name); if (IS_ERR(tiqn)) - return ERR_PTR(PTR_ERR(tiqn)); + return ERR_CAST(tiqn); /* * Setup struct iscsi_wwn_stat_grps for se_wwn->fabric_stat_group. */ diff --git a/drivers/target/iscsi/iscsi_target_erl1.c b/drivers/target/iscsi/iscsi_target_erl1.c index 980650792cf..c4c68da3e50 100644 --- a/drivers/target/iscsi/iscsi_target_erl1.c +++ b/drivers/target/iscsi/iscsi_target_erl1.c @@ -834,7 +834,7 @@ static int iscsit_attach_ooo_cmdsn( */ list_for_each_entry(ooo_tmp, &sess->sess_ooo_cmdsn_list, ooo_list) { - while (ooo_tmp->cmdsn < ooo_cmdsn->cmdsn) + if (ooo_tmp->cmdsn < ooo_cmdsn->cmdsn) continue; list_add(&ooo_cmdsn->ooo_list, diff --git a/drivers/target/iscsi/iscsi_target_login.c b/drivers/target/iscsi/iscsi_target_login.c index bcaf82f4703..daad362a93c 100644 --- a/drivers/target/iscsi/iscsi_target_login.c +++ b/drivers/target/iscsi/iscsi_target_login.c @@ -1013,19 +1013,9 @@ static int __iscsi_target_login_thread(struct iscsi_np *np) ISCSI_LOGIN_STATUS_TARGET_ERROR); goto new_sess_out; } -#if 0 - if (!iscsi_ntop6((const unsigned char *) - &sock_in6.sin6_addr.in6_u, - (char *)&conn->ipv6_login_ip[0], - IPV6_ADDRESS_SPACE)) { - pr_err("iscsi_ntop6() failed\n"); - iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR, - ISCSI_LOGIN_STATUS_TARGET_ERROR); - goto new_sess_out; - } -#else - pr_debug("Skipping iscsi_ntop6()\n"); -#endif + snprintf(conn->login_ip, sizeof(conn->login_ip), "%pI6c", + &sock_in6.sin6_addr.in6_u); + conn->login_port = ntohs(sock_in6.sin6_port); } else { memset(&sock_in, 0, sizeof(struct sockaddr_in)); diff --git a/drivers/target/iscsi/iscsi_target_parameters.c b/drivers/target/iscsi/iscsi_target_parameters.c index 252e246cf51..5b773160200 100644 --- a/drivers/target/iscsi/iscsi_target_parameters.c +++ b/drivers/target/iscsi/iscsi_target_parameters.c @@ -545,13 +545,13 @@ int iscsi_copy_param_list( struct iscsi_param_list *src_param_list, int leading) { - struct iscsi_param *new_param = NULL, *param = NULL; + struct iscsi_param *param = NULL; + struct iscsi_param *new_param = NULL; struct iscsi_param_list *param_list = NULL; param_list = kzalloc(sizeof(struct iscsi_param_list), GFP_KERNEL); if (!param_list) { - pr_err("Unable to allocate memory for" - " struct iscsi_param_list.\n"); + pr_err("Unable to allocate memory for struct iscsi_param_list.\n"); goto err_out; } INIT_LIST_HEAD(¶m_list->param_list); @@ -567,8 +567,17 @@ int iscsi_copy_param_list( new_param = kzalloc(sizeof(struct iscsi_param), GFP_KERNEL); if (!new_param) { - pr_err("Unable to allocate memory for" - " struct iscsi_param.\n"); + pr_err("Unable to allocate memory for struct iscsi_param.\n"); + goto err_out; + } + + new_param->name = kstrdup(param->name, GFP_KERNEL); + new_param->value = kstrdup(param->value, GFP_KERNEL); + if (!new_param->value || !new_param->name) { + kfree(new_param->value); + kfree(new_param->name); + kfree(new_param); + pr_err("Unable to allocate memory for parameter name/value.\n"); goto err_out; } @@ -580,32 +589,12 @@ int iscsi_copy_param_list( new_param->use = param->use; new_param->type_range = param->type_range; - new_param->name = kzalloc(strlen(param->name) + 1, GFP_KERNEL); - if (!new_param->name) { - pr_err("Unable to allocate memory for" - " parameter name.\n"); - goto err_out; - } - - new_param->value = kzalloc(strlen(param->value) + 1, - GFP_KERNEL); - if (!new_param->value) { - pr_err("Unable to allocate memory for" - " parameter value.\n"); - goto err_out; - } - - memcpy(new_param->name, param->name, strlen(param->name)); - new_param->name[strlen(param->name)] = '\0'; - memcpy(new_param->value, param->value, strlen(param->value)); - new_param->value[strlen(param->value)] = '\0'; - list_add_tail(&new_param->p_list, ¶m_list->param_list); } - if (!list_empty(¶m_list->param_list)) + if (!list_empty(¶m_list->param_list)) { *dst_param_list = param_list; - else { + } else { pr_err("No parameters allocated.\n"); goto err_out; } @@ -1441,7 +1430,7 @@ static int iscsi_enforce_integrity_rules( u8 DataSequenceInOrder = 0; u8 ErrorRecoveryLevel = 0, SessionType = 0; u8 IFMarker = 0, OFMarker = 0; - u8 IFMarkInt_Reject = 0, OFMarkInt_Reject = 0; + u8 IFMarkInt_Reject = 1, OFMarkInt_Reject = 1; u32 FirstBurstLength = 0, MaxBurstLength = 0; struct iscsi_param *param = NULL; diff --git a/drivers/target/iscsi/iscsi_target_util.c b/drivers/target/iscsi/iscsi_target_util.c index a1acb016790..f00137f377b 100644 --- a/drivers/target/iscsi/iscsi_target_util.c +++ b/drivers/target/iscsi/iscsi_target_util.c @@ -243,7 +243,7 @@ struct iscsi_cmd *iscsit_allocate_se_cmd_for_tmr( if (!cmd->tmr_req) { pr_err("Unable to allocate memory for" " Task Management command!\n"); - return NULL; + goto out; } /* * TASK_REASSIGN for ERL=2 / connection stays inside of @@ -298,8 +298,6 @@ struct iscsi_cmd *iscsit_allocate_se_cmd_for_tmr( return cmd; out: iscsit_release_cmd(cmd); - if (se_cmd) - transport_free_se_cmd(se_cmd); return NULL; } @@ -877,40 +875,6 @@ void iscsit_inc_session_usage_count(struct iscsi_session *sess) } /* - * Used before iscsi_do[rx,tx]_data() to determine iov and [rx,tx]_marker - * array counts needed for sync and steering. - */ -static int iscsit_determine_sync_and_steering_counts( - struct iscsi_conn *conn, - struct iscsi_data_count *count) -{ - u32 length = count->data_length; - u32 marker, markint; - - count->sync_and_steering = 1; - - marker = (count->type == ISCSI_RX_DATA) ? - conn->of_marker : conn->if_marker; - markint = (count->type == ISCSI_RX_DATA) ? - (conn->conn_ops->OFMarkInt * 4) : - (conn->conn_ops->IFMarkInt * 4); - count->ss_iov_count = count->iov_count; - - while (length > 0) { - if (length >= marker) { - count->ss_iov_count += 3; - count->ss_marker_count += 2; - - length -= marker; - marker = markint; - } else - length = 0; - } - - return 0; -} - -/* * Setup conn->if_marker and conn->of_marker values based upon * the initial marker-less interval. (see iSCSI v19 A.2) */ @@ -1292,7 +1256,7 @@ int iscsit_fe_sendpage_sg( struct kvec iov; u32 tx_hdr_size, data_len; u32 offset = cmd->first_data_sg_off; - int tx_sent; + int tx_sent, iov_off; send_hdr: tx_hdr_size = ISCSI_HDR_LEN; @@ -1312,9 +1276,19 @@ send_hdr: } data_len = cmd->tx_size - tx_hdr_size - cmd->padding; - if (conn->conn_ops->DataDigest) + /* + * Set iov_off used by padding and data digest tx_data() calls below + * in order to determine proper offset into cmd->iov_data[] + */ + if (conn->conn_ops->DataDigest) { data_len -= ISCSI_CRC_LEN; - + if (cmd->padding) + iov_off = (cmd->iov_data_count - 2); + else + iov_off = (cmd->iov_data_count - 1); + } else { + iov_off = (cmd->iov_data_count - 1); + } /* * Perform sendpage() for each page in the scatterlist */ @@ -1343,8 +1317,7 @@ send_pg: send_padding: if (cmd->padding) { - struct kvec *iov_p = - &cmd->iov_data[cmd->iov_data_count-1]; + struct kvec *iov_p = &cmd->iov_data[iov_off++]; tx_sent = tx_data(conn, iov_p, 1, cmd->padding); if (cmd->padding != tx_sent) { @@ -1358,8 +1331,7 @@ send_padding: send_datacrc: if (conn->conn_ops->DataDigest) { - struct kvec *iov_d = - &cmd->iov_data[cmd->iov_data_count]; + struct kvec *iov_d = &cmd->iov_data[iov_off]; tx_sent = tx_data(conn, iov_d, 1, ISCSI_CRC_LEN); if (ISCSI_CRC_LEN != tx_sent) { @@ -1433,8 +1405,7 @@ static int iscsit_do_rx_data( struct iscsi_data_count *count) { int data = count->data_length, rx_loop = 0, total_rx = 0, iov_len; - u32 rx_marker_val[count->ss_marker_count], rx_marker_iov = 0; - struct kvec iov[count->ss_iov_count], *iov_p; + struct kvec *iov_p; struct msghdr msg; if (!conn || !conn->sock || !conn->conn_ops) @@ -1442,93 +1413,8 @@ static int iscsit_do_rx_data( memset(&msg, 0, sizeof(struct msghdr)); - if (count->sync_and_steering) { - int size = 0; - u32 i, orig_iov_count = 0; - u32 orig_iov_len = 0, orig_iov_loc = 0; - u32 iov_count = 0, per_iov_bytes = 0; - u32 *rx_marker, old_rx_marker = 0; - struct kvec *iov_record; - - memset(&rx_marker_val, 0, - count->ss_marker_count * sizeof(u32)); - memset(&iov, 0, count->ss_iov_count * sizeof(struct kvec)); - - iov_record = count->iov; - orig_iov_count = count->iov_count; - rx_marker = &conn->of_marker; - - i = 0; - size = data; - orig_iov_len = iov_record[orig_iov_loc].iov_len; - while (size > 0) { - pr_debug("rx_data: #1 orig_iov_len %u," - " orig_iov_loc %u\n", orig_iov_len, orig_iov_loc); - pr_debug("rx_data: #2 rx_marker %u, size" - " %u\n", *rx_marker, size); - - if (orig_iov_len >= *rx_marker) { - iov[iov_count].iov_len = *rx_marker; - iov[iov_count++].iov_base = - (iov_record[orig_iov_loc].iov_base + - per_iov_bytes); - - iov[iov_count].iov_len = (MARKER_SIZE / 2); - iov[iov_count++].iov_base = - &rx_marker_val[rx_marker_iov++]; - iov[iov_count].iov_len = (MARKER_SIZE / 2); - iov[iov_count++].iov_base = - &rx_marker_val[rx_marker_iov++]; - old_rx_marker = *rx_marker; - - /* - * OFMarkInt is in 32-bit words. - */ - *rx_marker = (conn->conn_ops->OFMarkInt * 4); - size -= old_rx_marker; - orig_iov_len -= old_rx_marker; - per_iov_bytes += old_rx_marker; - - pr_debug("rx_data: #3 new_rx_marker" - " %u, size %u\n", *rx_marker, size); - } else { - iov[iov_count].iov_len = orig_iov_len; - iov[iov_count++].iov_base = - (iov_record[orig_iov_loc].iov_base + - per_iov_bytes); - - per_iov_bytes = 0; - *rx_marker -= orig_iov_len; - size -= orig_iov_len; - - if (size) - orig_iov_len = - iov_record[++orig_iov_loc].iov_len; - - pr_debug("rx_data: #4 new_rx_marker" - " %u, size %u\n", *rx_marker, size); - } - } - data += (rx_marker_iov * (MARKER_SIZE / 2)); - - iov_p = &iov[0]; - iov_len = iov_count; - - if (iov_count > count->ss_iov_count) { - pr_err("iov_count: %d, count->ss_iov_count:" - " %d\n", iov_count, count->ss_iov_count); - return -1; - } - if (rx_marker_iov > count->ss_marker_count) { - pr_err("rx_marker_iov: %d, count->ss_marker" - "_count: %d\n", rx_marker_iov, - count->ss_marker_count); - return -1; - } - } else { - iov_p = count->iov; - iov_len = count->iov_count; - } + iov_p = count->iov; + iov_len = count->iov_count; while (total_rx < data) { rx_loop = kernel_recvmsg(conn->sock, &msg, iov_p, iov_len, @@ -1543,16 +1429,6 @@ static int iscsit_do_rx_data( rx_loop, total_rx, data); } - if (count->sync_and_steering) { - int j; - for (j = 0; j < rx_marker_iov; j++) { - pr_debug("rx_data: #5 j: %d, offset: %d\n", - j, rx_marker_val[j]); - conn->of_marker_offset = rx_marker_val[j]; - } - total_rx -= (rx_marker_iov * (MARKER_SIZE / 2)); - } - return total_rx; } @@ -1561,8 +1437,7 @@ static int iscsit_do_tx_data( struct iscsi_data_count *count) { int data = count->data_length, total_tx = 0, tx_loop = 0, iov_len; - u32 tx_marker_val[count->ss_marker_count], tx_marker_iov = 0; - struct kvec iov[count->ss_iov_count], *iov_p; + struct kvec *iov_p; struct msghdr msg; if (!conn || !conn->sock || !conn->conn_ops) @@ -1575,98 +1450,8 @@ static int iscsit_do_tx_data( memset(&msg, 0, sizeof(struct msghdr)); - if (count->sync_and_steering) { - int size = 0; - u32 i, orig_iov_count = 0; - u32 orig_iov_len = 0, orig_iov_loc = 0; - u32 iov_count = 0, per_iov_bytes = 0; - u32 *tx_marker, old_tx_marker = 0; - struct kvec *iov_record; - - memset(&tx_marker_val, 0, - count->ss_marker_count * sizeof(u32)); - memset(&iov, 0, count->ss_iov_count * sizeof(struct kvec)); - - iov_record = count->iov; - orig_iov_count = count->iov_count; - tx_marker = &conn->if_marker; - - i = 0; - size = data; - orig_iov_len = iov_record[orig_iov_loc].iov_len; - while (size > 0) { - pr_debug("tx_data: #1 orig_iov_len %u," - " orig_iov_loc %u\n", orig_iov_len, orig_iov_loc); - pr_debug("tx_data: #2 tx_marker %u, size" - " %u\n", *tx_marker, size); - - if (orig_iov_len >= *tx_marker) { - iov[iov_count].iov_len = *tx_marker; - iov[iov_count++].iov_base = - (iov_record[orig_iov_loc].iov_base + - per_iov_bytes); - - tx_marker_val[tx_marker_iov] = - (size - *tx_marker); - iov[iov_count].iov_len = (MARKER_SIZE / 2); - iov[iov_count++].iov_base = - &tx_marker_val[tx_marker_iov++]; - iov[iov_count].iov_len = (MARKER_SIZE / 2); - iov[iov_count++].iov_base = - &tx_marker_val[tx_marker_iov++]; - old_tx_marker = *tx_marker; - - /* - * IFMarkInt is in 32-bit words. - */ - *tx_marker = (conn->conn_ops->IFMarkInt * 4); - size -= old_tx_marker; - orig_iov_len -= old_tx_marker; - per_iov_bytes += old_tx_marker; - - pr_debug("tx_data: #3 new_tx_marker" - " %u, size %u\n", *tx_marker, size); - pr_debug("tx_data: #4 offset %u\n", - tx_marker_val[tx_marker_iov-1]); - } else { - iov[iov_count].iov_len = orig_iov_len; - iov[iov_count++].iov_base - = (iov_record[orig_iov_loc].iov_base + - per_iov_bytes); - - per_iov_bytes = 0; - *tx_marker -= orig_iov_len; - size -= orig_iov_len; - - if (size) - orig_iov_len = - iov_record[++orig_iov_loc].iov_len; - - pr_debug("tx_data: #5 new_tx_marker" - " %u, size %u\n", *tx_marker, size); - } - } - - data += (tx_marker_iov * (MARKER_SIZE / 2)); - - iov_p = &iov[0]; - iov_len = iov_count; - - if (iov_count > count->ss_iov_count) { - pr_err("iov_count: %d, count->ss_iov_count:" - " %d\n", iov_count, count->ss_iov_count); - return -1; - } - if (tx_marker_iov > count->ss_marker_count) { - pr_err("tx_marker_iov: %d, count->ss_marker" - "_count: %d\n", tx_marker_iov, - count->ss_marker_count); - return -1; - } - } else { - iov_p = count->iov; - iov_len = count->iov_count; - } + iov_p = count->iov; + iov_len = count->iov_count; while (total_tx < data) { tx_loop = kernel_sendmsg(conn->sock, &msg, iov_p, iov_len, @@ -1681,9 +1466,6 @@ static int iscsit_do_tx_data( tx_loop, total_tx, data); } - if (count->sync_and_steering) - total_tx -= (tx_marker_iov * (MARKER_SIZE / 2)); - return total_tx; } @@ -1704,12 +1486,6 @@ int rx_data( c.data_length = data; c.type = ISCSI_RX_DATA; - if (conn->conn_ops->OFMarker && - (conn->conn_state >= TARG_CONN_STATE_LOGGED_IN)) { - if (iscsit_determine_sync_and_steering_counts(conn, &c) < 0) - return -1; - } - return iscsit_do_rx_data(conn, &c); } @@ -1730,12 +1506,6 @@ int tx_data( c.data_length = data; c.type = ISCSI_TX_DATA; - if (conn->conn_ops->IFMarker && - (conn->conn_state >= TARG_CONN_STATE_LOGGED_IN)) { - if (iscsit_determine_sync_and_steering_counts(conn, &c) < 0) - return -1; - } - return iscsit_do_tx_data(conn, &c); } diff --git a/drivers/target/target_core_cdb.c b/drivers/target/target_core_cdb.c index 8ae09a1bdf7..f04d4ef99dc 100644 --- a/drivers/target/target_core_cdb.c +++ b/drivers/target/target_core_cdb.c @@ -24,6 +24,7 @@ */ #include <linux/kernel.h> +#include <linux/ctype.h> #include <asm/unaligned.h> #include <scsi/scsi.h> @@ -67,6 +68,7 @@ target_emulate_inquiry_std(struct se_cmd *cmd) { struct se_lun *lun = cmd->se_lun; struct se_device *dev = cmd->se_dev; + struct se_portal_group *tpg = lun->lun_sep->sep_tpg; unsigned char *buf; /* @@ -81,9 +83,13 @@ target_emulate_inquiry_std(struct se_cmd *cmd) buf = transport_kmap_first_data_page(cmd); - buf[0] = dev->transport->get_device_type(dev); - if (buf[0] == TYPE_TAPE) - buf[1] = 0x80; + if (dev == tpg->tpg_virt_lun0.lun_se_dev) { + buf[0] = 0x3f; /* Not connected */ + } else { + buf[0] = dev->transport->get_device_type(dev); + if (buf[0] == TYPE_TAPE) + buf[1] = 0x80; + } buf[2] = dev->transport->get_device_rev(dev); /* @@ -149,6 +155,37 @@ target_emulate_evpd_80(struct se_cmd *cmd, unsigned char *buf) return 0; } +static void +target_parse_naa_6h_vendor_specific(struct se_device *dev, unsigned char *buf_off) +{ + unsigned char *p = &dev->se_sub_dev->t10_wwn.unit_serial[0]; + unsigned char *buf = buf_off; + int cnt = 0, next = 1; + /* + * Generate up to 36 bits of VENDOR SPECIFIC IDENTIFIER starting on + * byte 3 bit 3-0 for NAA IEEE Registered Extended DESIGNATOR field + * format, followed by 64 bits of VENDOR SPECIFIC IDENTIFIER EXTENSION + * to complete the payload. These are based from VPD=0x80 PRODUCT SERIAL + * NUMBER set via vpd_unit_serial in target_core_configfs.c to ensure + * per device uniqeness. + */ + while (*p != '\0') { + if (cnt >= 13) + break; + if (!isxdigit(*p)) { + p++; + continue; + } + if (next != 0) { + buf[cnt++] |= hex_to_bin(*p++); + next = 0; + } else { + buf[cnt] = hex_to_bin(*p++) << 4; + next = 1; + } + } +} + /* * Device identification VPD, for a complete list of * DESIGNATOR TYPEs see spc4r17 Table 459. @@ -214,8 +251,7 @@ target_emulate_evpd_83(struct se_cmd *cmd, unsigned char *buf) * VENDOR_SPECIFIC_IDENTIFIER and * VENDOR_SPECIFIC_IDENTIFIER_EXTENTION */ - buf[off++] |= hex_to_bin(dev->se_sub_dev->t10_wwn.unit_serial[0]); - hex2bin(&buf[off], &dev->se_sub_dev->t10_wwn.unit_serial[1], 12); + target_parse_naa_6h_vendor_specific(dev, &buf[off]); len = 20; off = (len + 4); @@ -915,8 +951,8 @@ target_emulate_modesense(struct se_cmd *cmd, int ten) length += target_modesense_control(dev, &buf[offset+length]); break; default: - pr_err("Got Unknown Mode Page: 0x%02x\n", - cdb[2] & 0x3f); + pr_err("MODE SENSE: unimplemented page/subpage: 0x%02x/0x%02x\n", + cdb[2] & 0x3f, cdb[3]); return PYX_TRANSPORT_UNKNOWN_MODE_PAGE; } offset += length; @@ -1072,8 +1108,6 @@ target_emulate_unmap(struct se_task *task) size -= 16; } - task->task_scsi_status = GOOD; - transport_complete_task(task, 1); err: transport_kunmap_first_data_page(cmd); @@ -1085,24 +1119,17 @@ err: * Note this is not used for TCM/pSCSI passthrough */ static int -target_emulate_write_same(struct se_task *task, int write_same32) +target_emulate_write_same(struct se_task *task, u32 num_blocks) { struct se_cmd *cmd = task->task_se_cmd; struct se_device *dev = cmd->se_dev; sector_t range; sector_t lba = cmd->t_task_lba; - unsigned int num_blocks; int ret; /* - * Extract num_blocks from the WRITE_SAME_* CDB. Then use the explict - * range when non zero is supplied, otherwise calculate the remaining - * range based on ->get_blocks() - starting LBA. + * Use the explicit range when non zero is supplied, otherwise calculate + * the remaining range based on ->get_blocks() - starting LBA. */ - if (write_same32) - num_blocks = get_unaligned_be32(&cmd->t_task_cdb[28]); - else - num_blocks = get_unaligned_be32(&cmd->t_task_cdb[10]); - if (num_blocks != 0) range = num_blocks; else @@ -1117,8 +1144,6 @@ target_emulate_write_same(struct se_task *task, int write_same32) return ret; } - task->task_scsi_status = GOOD; - transport_complete_task(task, 1); return 0; } @@ -1165,13 +1190,23 @@ transport_emulate_control_cdb(struct se_task *task) } ret = target_emulate_unmap(task); break; + case WRITE_SAME: + if (!dev->transport->do_discard) { + pr_err("WRITE_SAME emulation not supported" + " for: %s\n", dev->transport->name); + return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + } + ret = target_emulate_write_same(task, + get_unaligned_be16(&cmd->t_task_cdb[7])); + break; case WRITE_SAME_16: if (!dev->transport->do_discard) { pr_err("WRITE_SAME_16 emulation not supported" " for: %s\n", dev->transport->name); return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; } - ret = target_emulate_write_same(task, 0); + ret = target_emulate_write_same(task, + get_unaligned_be32(&cmd->t_task_cdb[10])); break; case VARIABLE_LENGTH_CMD: service_action = @@ -1184,7 +1219,8 @@ transport_emulate_control_cdb(struct se_task *task) dev->transport->name); return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; } - ret = target_emulate_write_same(task, 1); + ret = target_emulate_write_same(task, + get_unaligned_be32(&cmd->t_task_cdb[28])); break; default: pr_err("Unsupported VARIABLE_LENGTH_CMD SA:" @@ -1219,8 +1255,14 @@ transport_emulate_control_cdb(struct se_task *task) if (ret < 0) return ret; - task->task_scsi_status = GOOD; - transport_complete_task(task, 1); + /* + * Handle the successful completion here unless a caller + * has explictly requested an asychronous completion. + */ + if (!(cmd->se_cmd_flags & SCF_EMULATE_CDB_ASYNC)) { + task->task_scsi_status = GOOD; + transport_complete_task(task, 1); + } return PYX_TRANSPORT_SENT_TO_TRANSPORT; } diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index b38b6c993e6..ca6e4a4df13 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -472,9 +472,9 @@ void core_clear_lun_from_tpg(struct se_lun *lun, struct se_portal_group *tpg) struct se_dev_entry *deve; u32 i; - spin_lock_bh(&tpg->acl_node_lock); + spin_lock_irq(&tpg->acl_node_lock); list_for_each_entry(nacl, &tpg->acl_node_list, acl_list) { - spin_unlock_bh(&tpg->acl_node_lock); + spin_unlock_irq(&tpg->acl_node_lock); spin_lock_irq(&nacl->device_list_lock); for (i = 0; i < TRANSPORT_MAX_LUNS_PER_TPG; i++) { @@ -491,9 +491,9 @@ void core_clear_lun_from_tpg(struct se_lun *lun, struct se_portal_group *tpg) } spin_unlock_irq(&nacl->device_list_lock); - spin_lock_bh(&tpg->acl_node_lock); + spin_lock_irq(&tpg->acl_node_lock); } - spin_unlock_bh(&tpg->acl_node_lock); + spin_unlock_irq(&tpg->acl_node_lock); } static struct se_port *core_alloc_port(struct se_device *dev) @@ -839,6 +839,24 @@ int se_dev_check_shutdown(struct se_device *dev) return ret; } +u32 se_dev_align_max_sectors(u32 max_sectors, u32 block_size) +{ + u32 tmp, aligned_max_sectors; + /* + * Limit max_sectors to a PAGE_SIZE aligned value for modern + * transport_allocate_data_tasks() operation. + */ + tmp = rounddown((max_sectors * block_size), PAGE_SIZE); + aligned_max_sectors = (tmp / block_size); + if (max_sectors != aligned_max_sectors) { + printk(KERN_INFO "Rounding down aligned max_sectors from %u" + " to %u\n", max_sectors, aligned_max_sectors); + return aligned_max_sectors; + } + + return max_sectors; +} + void se_dev_set_default_attribs( struct se_device *dev, struct se_dev_limits *dev_limits) @@ -878,6 +896,11 @@ void se_dev_set_default_attribs( * max_sectors is based on subsystem plugin dependent requirements. */ dev->se_sub_dev->se_dev_attrib.hw_max_sectors = limits->max_hw_sectors; + /* + * Align max_sectors down to PAGE_SIZE to follow transport_allocate_data_tasks() + */ + limits->max_sectors = se_dev_align_max_sectors(limits->max_sectors, + limits->logical_block_size); dev->se_sub_dev->se_dev_attrib.max_sectors = limits->max_sectors; /* * Set optimal_sectors from max_sectors, which can be lowered via @@ -1242,6 +1265,11 @@ int se_dev_set_max_sectors(struct se_device *dev, u32 max_sectors) return -EINVAL; } } + /* + * Align max_sectors down to PAGE_SIZE to follow transport_allocate_data_tasks() + */ + max_sectors = se_dev_align_max_sectors(max_sectors, + dev->se_sub_dev->se_dev_attrib.block_size); dev->se_sub_dev->se_dev_attrib.max_sectors = max_sectors; pr_debug("dev[%p]: SE Device max_sectors changed to %u\n", @@ -1344,15 +1372,17 @@ struct se_lun *core_dev_add_lun( */ if (tpg->se_tpg_tfo->tpg_check_demo_mode(tpg)) { struct se_node_acl *acl; - spin_lock_bh(&tpg->acl_node_lock); + spin_lock_irq(&tpg->acl_node_lock); list_for_each_entry(acl, &tpg->acl_node_list, acl_list) { - if (acl->dynamic_node_acl) { - spin_unlock_bh(&tpg->acl_node_lock); + if (acl->dynamic_node_acl && + (!tpg->se_tpg_tfo->tpg_check_demo_mode_login_only || + !tpg->se_tpg_tfo->tpg_check_demo_mode_login_only(tpg))) { + spin_unlock_irq(&tpg->acl_node_lock); core_tpg_add_node_to_devs(acl, tpg); - spin_lock_bh(&tpg->acl_node_lock); + spin_lock_irq(&tpg->acl_node_lock); } } - spin_unlock_bh(&tpg->acl_node_lock); + spin_unlock_irq(&tpg->acl_node_lock); } return lun_p; diff --git a/drivers/target/target_core_fabric_configfs.c b/drivers/target/target_core_fabric_configfs.c index f1654694f4e..55bbe0847a6 100644 --- a/drivers/target/target_core_fabric_configfs.c +++ b/drivers/target/target_core_fabric_configfs.c @@ -481,7 +481,7 @@ static struct config_group *target_fabric_make_nodeacl( se_nacl = tf->tf_ops.fabric_make_nodeacl(se_tpg, group, name); if (IS_ERR(se_nacl)) - return ERR_PTR(PTR_ERR(se_nacl)); + return ERR_CAST(se_nacl); nacl_cg = &se_nacl->acl_group; nacl_cg->default_groups = se_nacl->acl_default_groups; diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c index 1c1b849cd4f..7fd3a161f7c 100644 --- a/drivers/target/target_core_pr.c +++ b/drivers/target/target_core_pr.c @@ -1598,14 +1598,14 @@ static int core_scsi3_decode_spec_i_port( * from the decoded fabric module specific TransportID * at *i_str. */ - spin_lock_bh(&tmp_tpg->acl_node_lock); + spin_lock_irq(&tmp_tpg->acl_node_lock); dest_node_acl = __core_tpg_get_initiator_node_acl( tmp_tpg, i_str); if (dest_node_acl) { atomic_inc(&dest_node_acl->acl_pr_ref_count); smp_mb__after_atomic_inc(); } - spin_unlock_bh(&tmp_tpg->acl_node_lock); + spin_unlock_irq(&tmp_tpg->acl_node_lock); if (!dest_node_acl) { core_scsi3_tpg_undepend_item(tmp_tpg); @@ -3496,14 +3496,14 @@ after_iport_check: /* * Locate the destination struct se_node_acl from the received Transport ID */ - spin_lock_bh(&dest_se_tpg->acl_node_lock); + spin_lock_irq(&dest_se_tpg->acl_node_lock); dest_node_acl = __core_tpg_get_initiator_node_acl(dest_se_tpg, initiator_str); if (dest_node_acl) { atomic_inc(&dest_node_acl->acl_pr_ref_count); smp_mb__after_atomic_inc(); } - spin_unlock_bh(&dest_se_tpg->acl_node_lock); + spin_unlock_irq(&dest_se_tpg->acl_node_lock); if (!dest_node_acl) { pr_err("Unable to locate %s dest_node_acl for" diff --git a/drivers/target/target_core_rd.c b/drivers/target/target_core_rd.c index 3dd81d24d9a..e567e129c69 100644 --- a/drivers/target/target_core_rd.c +++ b/drivers/target/target_core_rd.c @@ -390,12 +390,10 @@ static int rd_MEMCPY_read(struct rd_request *req) length = req->rd_size; dst = sg_virt(&sg_d[i++]) + dst_offset; - if (!dst) - BUG(); + BUG_ON(!dst); src = sg_virt(&sg_s[j]) + src_offset; - if (!src) - BUG(); + BUG_ON(!src); dst_offset = 0; src_offset = length; @@ -415,8 +413,7 @@ static int rd_MEMCPY_read(struct rd_request *req) length = req->rd_size; dst = sg_virt(&sg_d[i]) + dst_offset; - if (!dst) - BUG(); + BUG_ON(!dst); if (sg_d[i].length == length) { i++; @@ -425,8 +422,7 @@ static int rd_MEMCPY_read(struct rd_request *req) dst_offset = length; src = sg_virt(&sg_s[j++]) + src_offset; - if (!src) - BUG(); + BUG_ON(!src); src_offset = 0; page_end = 1; @@ -510,12 +506,10 @@ static int rd_MEMCPY_write(struct rd_request *req) length = req->rd_size; src = sg_virt(&sg_s[i++]) + src_offset; - if (!src) - BUG(); + BUG_ON(!src); dst = sg_virt(&sg_d[j]) + dst_offset; - if (!dst) - BUG(); + BUG_ON(!dst); src_offset = 0; dst_offset = length; @@ -535,8 +529,7 @@ static int rd_MEMCPY_write(struct rd_request *req) length = req->rd_size; src = sg_virt(&sg_s[i]) + src_offset; - if (!src) - BUG(); + BUG_ON(!src); if (sg_s[i].length == length) { i++; @@ -545,8 +538,7 @@ static int rd_MEMCPY_write(struct rd_request *req) src_offset = length; dst = sg_virt(&sg_d[j++]) + dst_offset; - if (!dst) - BUG(); + BUG_ON(!dst); dst_offset = 0; page_end = 1; diff --git a/drivers/target/target_core_tpg.c b/drivers/target/target_core_tpg.c index 4f1ba4c5ef1..162b736c734 100644 --- a/drivers/target/target_core_tpg.c +++ b/drivers/target/target_core_tpg.c @@ -137,15 +137,15 @@ struct se_node_acl *core_tpg_get_initiator_node_acl( { struct se_node_acl *acl; - spin_lock_bh(&tpg->acl_node_lock); + spin_lock_irq(&tpg->acl_node_lock); list_for_each_entry(acl, &tpg->acl_node_list, acl_list) { if (!strcmp(acl->initiatorname, initiatorname) && !acl->dynamic_node_acl) { - spin_unlock_bh(&tpg->acl_node_lock); + spin_unlock_irq(&tpg->acl_node_lock); return acl; } } - spin_unlock_bh(&tpg->acl_node_lock); + spin_unlock_irq(&tpg->acl_node_lock); return NULL; } @@ -298,13 +298,21 @@ struct se_node_acl *core_tpg_check_initiator_node_acl( tpg->se_tpg_tfo->tpg_release_fabric_acl(tpg, acl); return NULL; } + /* + * Here we only create demo-mode MappedLUNs from the active + * TPG LUNs if the fabric is not explictly asking for + * tpg_check_demo_mode_login_only() == 1. + */ + if ((tpg->se_tpg_tfo->tpg_check_demo_mode_login_only != NULL) && + (tpg->se_tpg_tfo->tpg_check_demo_mode_login_only(tpg) == 1)) + do { ; } while (0); + else + core_tpg_add_node_to_devs(acl, tpg); - core_tpg_add_node_to_devs(acl, tpg); - - spin_lock_bh(&tpg->acl_node_lock); + spin_lock_irq(&tpg->acl_node_lock); list_add_tail(&acl->acl_list, &tpg->acl_node_list); tpg->num_node_acls++; - spin_unlock_bh(&tpg->acl_node_lock); + spin_unlock_irq(&tpg->acl_node_lock); pr_debug("%s_TPG[%u] - Added DYNAMIC ACL with TCQ Depth: %d for %s" " Initiator Node: %s\n", tpg->se_tpg_tfo->get_fabric_name(), @@ -354,7 +362,7 @@ struct se_node_acl *core_tpg_add_initiator_node_acl( { struct se_node_acl *acl = NULL; - spin_lock_bh(&tpg->acl_node_lock); + spin_lock_irq(&tpg->acl_node_lock); acl = __core_tpg_get_initiator_node_acl(tpg, initiatorname); if (acl) { if (acl->dynamic_node_acl) { @@ -362,7 +370,7 @@ struct se_node_acl *core_tpg_add_initiator_node_acl( pr_debug("%s_TPG[%u] - Replacing dynamic ACL" " for %s\n", tpg->se_tpg_tfo->get_fabric_name(), tpg->se_tpg_tfo->tpg_get_tag(tpg), initiatorname); - spin_unlock_bh(&tpg->acl_node_lock); + spin_unlock_irq(&tpg->acl_node_lock); /* * Release the locally allocated struct se_node_acl * because * core_tpg_add_initiator_node_acl() returned @@ -378,10 +386,10 @@ struct se_node_acl *core_tpg_add_initiator_node_acl( " Node %s already exists for TPG %u, ignoring" " request.\n", tpg->se_tpg_tfo->get_fabric_name(), initiatorname, tpg->se_tpg_tfo->tpg_get_tag(tpg)); - spin_unlock_bh(&tpg->acl_node_lock); + spin_unlock_irq(&tpg->acl_node_lock); return ERR_PTR(-EEXIST); } - spin_unlock_bh(&tpg->acl_node_lock); + spin_unlock_irq(&tpg->acl_node_lock); if (!se_nacl) { pr_err("struct se_node_acl pointer is NULL\n"); @@ -418,10 +426,10 @@ struct se_node_acl *core_tpg_add_initiator_node_acl( return ERR_PTR(-EINVAL); } - spin_lock_bh(&tpg->acl_node_lock); + spin_lock_irq(&tpg->acl_node_lock); list_add_tail(&acl->acl_list, &tpg->acl_node_list); tpg->num_node_acls++; - spin_unlock_bh(&tpg->acl_node_lock); + spin_unlock_irq(&tpg->acl_node_lock); done: pr_debug("%s_TPG[%hu] - Added ACL with TCQ Depth: %d for %s" @@ -445,14 +453,14 @@ int core_tpg_del_initiator_node_acl( struct se_session *sess, *sess_tmp; int dynamic_acl = 0; - spin_lock_bh(&tpg->acl_node_lock); + spin_lock_irq(&tpg->acl_node_lock); if (acl->dynamic_node_acl) { acl->dynamic_node_acl = 0; dynamic_acl = 1; } list_del(&acl->acl_list); tpg->num_node_acls--; - spin_unlock_bh(&tpg->acl_node_lock); + spin_unlock_irq(&tpg->acl_node_lock); spin_lock_bh(&tpg->session_lock); list_for_each_entry_safe(sess, sess_tmp, @@ -503,21 +511,21 @@ int core_tpg_set_initiator_node_queue_depth( struct se_node_acl *acl; int dynamic_acl = 0; - spin_lock_bh(&tpg->acl_node_lock); + spin_lock_irq(&tpg->acl_node_lock); acl = __core_tpg_get_initiator_node_acl(tpg, initiatorname); if (!acl) { pr_err("Access Control List entry for %s Initiator" " Node %s does not exists for TPG %hu, ignoring" " request.\n", tpg->se_tpg_tfo->get_fabric_name(), initiatorname, tpg->se_tpg_tfo->tpg_get_tag(tpg)); - spin_unlock_bh(&tpg->acl_node_lock); + spin_unlock_irq(&tpg->acl_node_lock); return -ENODEV; } if (acl->dynamic_node_acl) { acl->dynamic_node_acl = 0; dynamic_acl = 1; } - spin_unlock_bh(&tpg->acl_node_lock); + spin_unlock_irq(&tpg->acl_node_lock); spin_lock_bh(&tpg->session_lock); list_for_each_entry(sess, &tpg->tpg_sess_list, sess_list) { @@ -533,10 +541,10 @@ int core_tpg_set_initiator_node_queue_depth( tpg->se_tpg_tfo->get_fabric_name(), initiatorname); spin_unlock_bh(&tpg->session_lock); - spin_lock_bh(&tpg->acl_node_lock); + spin_lock_irq(&tpg->acl_node_lock); if (dynamic_acl) acl->dynamic_node_acl = 1; - spin_unlock_bh(&tpg->acl_node_lock); + spin_unlock_irq(&tpg->acl_node_lock); return -EEXIST; } /* @@ -571,10 +579,10 @@ int core_tpg_set_initiator_node_queue_depth( if (init_sess) tpg->se_tpg_tfo->close_session(init_sess); - spin_lock_bh(&tpg->acl_node_lock); + spin_lock_irq(&tpg->acl_node_lock); if (dynamic_acl) acl->dynamic_node_acl = 1; - spin_unlock_bh(&tpg->acl_node_lock); + spin_unlock_irq(&tpg->acl_node_lock); return -EINVAL; } spin_unlock_bh(&tpg->session_lock); @@ -590,10 +598,10 @@ int core_tpg_set_initiator_node_queue_depth( initiatorname, tpg->se_tpg_tfo->get_fabric_name(), tpg->se_tpg_tfo->tpg_get_tag(tpg)); - spin_lock_bh(&tpg->acl_node_lock); + spin_lock_irq(&tpg->acl_node_lock); if (dynamic_acl) acl->dynamic_node_acl = 1; - spin_unlock_bh(&tpg->acl_node_lock); + spin_unlock_irq(&tpg->acl_node_lock); return 0; } @@ -717,20 +725,20 @@ int core_tpg_deregister(struct se_portal_group *se_tpg) * not been released because of TFO->tpg_check_demo_mode_cache() == 1 * in transport_deregister_session(). */ - spin_lock_bh(&se_tpg->acl_node_lock); + spin_lock_irq(&se_tpg->acl_node_lock); list_for_each_entry_safe(nacl, nacl_tmp, &se_tpg->acl_node_list, acl_list) { list_del(&nacl->acl_list); se_tpg->num_node_acls--; - spin_unlock_bh(&se_tpg->acl_node_lock); + spin_unlock_irq(&se_tpg->acl_node_lock); core_tpg_wait_for_nacl_pr_ref(nacl); core_free_device_list_for_node(nacl, se_tpg); se_tpg->se_tpg_tfo->tpg_release_fabric_acl(se_tpg, nacl); - spin_lock_bh(&se_tpg->acl_node_lock); + spin_lock_irq(&se_tpg->acl_node_lock); } - spin_unlock_bh(&se_tpg->acl_node_lock); + spin_unlock_irq(&se_tpg->acl_node_lock); if (se_tpg->se_tpg_type == TRANSPORT_TPG_TYPE_NORMAL) core_tpg_release_virtual_lun0(se_tpg); diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 89760329d5d..a4b0a8d27f2 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -389,17 +389,18 @@ void transport_deregister_session(struct se_session *se_sess) { struct se_portal_group *se_tpg = se_sess->se_tpg; struct se_node_acl *se_nacl; + unsigned long flags; if (!se_tpg) { transport_free_session(se_sess); return; } - spin_lock_bh(&se_tpg->session_lock); + spin_lock_irqsave(&se_tpg->session_lock, flags); list_del(&se_sess->sess_list); se_sess->se_tpg = NULL; se_sess->fabric_sess_ptr = NULL; - spin_unlock_bh(&se_tpg->session_lock); + spin_unlock_irqrestore(&se_tpg->session_lock, flags); /* * Determine if we need to do extra work for this initiator node's @@ -407,22 +408,22 @@ void transport_deregister_session(struct se_session *se_sess) */ se_nacl = se_sess->se_node_acl; if (se_nacl) { - spin_lock_bh(&se_tpg->acl_node_lock); + spin_lock_irqsave(&se_tpg->acl_node_lock, flags); if (se_nacl->dynamic_node_acl) { if (!se_tpg->se_tpg_tfo->tpg_check_demo_mode_cache( se_tpg)) { list_del(&se_nacl->acl_list); se_tpg->num_node_acls--; - spin_unlock_bh(&se_tpg->acl_node_lock); + spin_unlock_irqrestore(&se_tpg->acl_node_lock, flags); core_tpg_wait_for_nacl_pr_ref(se_nacl); core_free_device_list_for_node(se_nacl, se_tpg); se_tpg->se_tpg_tfo->tpg_release_fabric_acl(se_tpg, se_nacl); - spin_lock_bh(&se_tpg->acl_node_lock); + spin_lock_irqsave(&se_tpg->acl_node_lock, flags); } } - spin_unlock_bh(&se_tpg->acl_node_lock); + spin_unlock_irqrestore(&se_tpg->acl_node_lock, flags); } transport_free_session(se_sess); @@ -976,15 +977,17 @@ static void target_qf_do_work(struct work_struct *work) { struct se_device *dev = container_of(work, struct se_device, qf_work_queue); + LIST_HEAD(qf_cmd_list); struct se_cmd *cmd, *cmd_tmp; spin_lock_irq(&dev->qf_cmd_lock); - list_for_each_entry_safe(cmd, cmd_tmp, &dev->qf_cmd_list, se_qf_node) { + list_splice_init(&dev->qf_cmd_list, &qf_cmd_list); + spin_unlock_irq(&dev->qf_cmd_lock); + list_for_each_entry_safe(cmd, cmd_tmp, &qf_cmd_list, se_qf_node) { list_del(&cmd->se_qf_node); atomic_dec(&dev->dev_qf_count); smp_mb__after_atomic_dec(); - spin_unlock_irq(&dev->qf_cmd_lock); pr_debug("Processing %s cmd: %p QUEUE_FULL in work queue" " context: %s\n", cmd->se_tfo->get_fabric_name(), cmd, @@ -996,10 +999,7 @@ static void target_qf_do_work(struct work_struct *work) * has been added to head of queue */ transport_add_cmd_to_queue(cmd, cmd->t_state); - - spin_lock_irq(&dev->qf_cmd_lock); } - spin_unlock_irq(&dev->qf_cmd_lock); } unsigned char *transport_dump_cmd_direction(struct se_cmd *cmd) @@ -2053,8 +2053,14 @@ static void transport_generic_request_failure( cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; break; } - - if (!sc) + /* + * If a fabric does not define a cmd->se_tfo->new_cmd_map caller, + * make the call to transport_send_check_condition_and_sense() + * directly. Otherwise expect the fabric to make the call to + * transport_send_check_condition_and_sense() after handling + * possible unsoliticied write data payloads. + */ + if (!sc && !cmd->se_tfo->new_cmd_map) transport_new_cmd_failure(cmd); else { ret = transport_send_check_condition_and_sense(cmd, @@ -2847,12 +2853,42 @@ static int transport_cmd_get_valid_sectors(struct se_cmd *cmd) " transport_dev_end_lba(): %llu\n", cmd->t_task_lba, sectors, transport_dev_end_lba(dev)); - pr_err(" We should return CHECK_CONDITION" - " but we don't yet\n"); - return 0; + return -EINVAL; } - return sectors; + return 0; +} + +static int target_check_write_same_discard(unsigned char *flags, struct se_device *dev) +{ + /* + * Determine if the received WRITE_SAME is used to for direct + * passthrough into Linux/SCSI with struct request via TCM/pSCSI + * or we are signaling the use of internal WRITE_SAME + UNMAP=1 + * emulation for -> Linux/BLOCK disbard with TCM/IBLOCK code. + */ + int passthrough = (dev->transport->transport_type == + TRANSPORT_PLUGIN_PHBA_PDEV); + + if (!passthrough) { + if ((flags[0] & 0x04) || (flags[0] & 0x02)) { + pr_err("WRITE_SAME PBDATA and LBDATA" + " bits not supported for Block Discard" + " Emulation\n"); + return -ENOSYS; + } + /* + * Currently for the emulated case we only accept + * tpws with the UNMAP=1 bit set. + */ + if (!(flags[0] & 0x08)) { + pr_err("WRITE_SAME w/o UNMAP bit not" + " supported for Block Discard Emulation\n"); + return -ENOSYS; + } + } + + return 0; } /* transport_generic_cmd_sequencer(): @@ -3065,7 +3101,7 @@ static int transport_generic_cmd_sequencer( goto out_unsupported_cdb; if (sectors) - size = transport_get_size(sectors, cdb, cmd); + size = transport_get_size(1, cdb, cmd); else { pr_err("WSNZ=1, WRITE_SAME w/sectors=0 not" " supported\n"); @@ -3075,27 +3111,9 @@ static int transport_generic_cmd_sequencer( cmd->t_task_lba = get_unaligned_be64(&cdb[12]); cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB; - /* - * Skip the remaining assignments for TCM/PSCSI passthrough - */ - if (passthrough) - break; - - if ((cdb[10] & 0x04) || (cdb[10] & 0x02)) { - pr_err("WRITE_SAME PBDATA and LBDATA" - " bits not supported for Block Discard" - " Emulation\n"); + if (target_check_write_same_discard(&cdb[10], dev) < 0) goto out_invalid_cdb_field; - } - /* - * Currently for the emulated case we only accept - * tpws with the UNMAP=1 bit set. - */ - if (!(cdb[10] & 0x08)) { - pr_err("WRITE_SAME w/o UNMAP bit not" - " supported for Block Discard Emulation\n"); - goto out_invalid_cdb_field; - } + break; default: pr_err("VARIABLE_LENGTH_CMD service action" @@ -3330,10 +3348,12 @@ static int transport_generic_cmd_sequencer( cmd->se_cmd_flags |= SCF_EMULATE_CDB_ASYNC; /* * Check to ensure that LBA + Range does not exceed past end of - * device. + * device for IBLOCK and FILEIO ->do_sync_cache() backend calls */ - if (!transport_cmd_get_valid_sectors(cmd)) - goto out_invalid_cdb_field; + if ((cmd->t_task_lba != 0) || (sectors != 0)) { + if (transport_cmd_get_valid_sectors(cmd) < 0) + goto out_invalid_cdb_field; + } break; case UNMAP: size = get_unaligned_be16(&cdb[7]); @@ -3345,40 +3365,38 @@ static int transport_generic_cmd_sequencer( goto out_unsupported_cdb; if (sectors) - size = transport_get_size(sectors, cdb, cmd); + size = transport_get_size(1, cdb, cmd); else { pr_err("WSNZ=1, WRITE_SAME w/sectors=0 not supported\n"); goto out_invalid_cdb_field; } cmd->t_task_lba = get_unaligned_be64(&cdb[2]); - passthrough = (dev->transport->transport_type == - TRANSPORT_PLUGIN_PHBA_PDEV); - /* - * Determine if the received WRITE_SAME_16 is used to for direct - * passthrough into Linux/SCSI with struct request via TCM/pSCSI - * or we are signaling the use of internal WRITE_SAME + UNMAP=1 - * emulation for -> Linux/BLOCK disbard with TCM/IBLOCK and - * TCM/FILEIO subsystem plugin backstores. - */ - if (!passthrough) { - if ((cdb[1] & 0x04) || (cdb[1] & 0x02)) { - pr_err("WRITE_SAME PBDATA and LBDATA" - " bits not supported for Block Discard" - " Emulation\n"); - goto out_invalid_cdb_field; - } - /* - * Currently for the emulated case we only accept - * tpws with the UNMAP=1 bit set. - */ - if (!(cdb[1] & 0x08)) { - pr_err("WRITE_SAME w/o UNMAP bit not " - " supported for Block Discard Emulation\n"); - goto out_invalid_cdb_field; - } + cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB; + + if (target_check_write_same_discard(&cdb[1], dev) < 0) + goto out_invalid_cdb_field; + break; + case WRITE_SAME: + sectors = transport_get_sectors_10(cdb, cmd, §or_ret); + if (sector_ret) + goto out_unsupported_cdb; + + if (sectors) + size = transport_get_size(1, cdb, cmd); + else { + pr_err("WSNZ=1, WRITE_SAME w/sectors=0 not supported\n"); + goto out_invalid_cdb_field; } + + cmd->t_task_lba = get_unaligned_be32(&cdb[2]); cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB; + /* + * Follow sbcr26 with WRITE_SAME (10) and check for the existence + * of byte 1 bit 3 UNMAP instead of original reserved field + */ + if (target_check_write_same_discard(&cdb[1], dev) < 0) + goto out_invalid_cdb_field; break; case ALLOW_MEDIUM_REMOVAL: case GPCMD_CLOSE_TRACK: @@ -3873,9 +3891,7 @@ EXPORT_SYMBOL(transport_generic_map_mem_to_cmd); static int transport_new_cmd_obj(struct se_cmd *cmd) { struct se_device *dev = cmd->se_dev; - u32 task_cdbs; - u32 rc; - int set_counts = 1; + int set_counts = 1, rc, task_cdbs; /* * Setup any BIDI READ tasks and memory from @@ -3893,7 +3909,7 @@ static int transport_new_cmd_obj(struct se_cmd *cmd) cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; - return PYX_TRANSPORT_LU_COMM_FAILURE; + return -EINVAL; } atomic_inc(&cmd->t_fe_count); atomic_inc(&cmd->t_se_count); @@ -3912,7 +3928,7 @@ static int transport_new_cmd_obj(struct se_cmd *cmd) cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; - return PYX_TRANSPORT_LU_COMM_FAILURE; + return -EINVAL; } if (set_counts) { @@ -4028,8 +4044,6 @@ void transport_do_task_sg_chain(struct se_cmd *cmd) if (!task->task_sg) continue; - BUG_ON(!task->task_padded_sg); - if (!sg_first) { sg_first = task->task_sg; chained_nents = task->task_sg_nents; @@ -4037,9 +4051,19 @@ void transport_do_task_sg_chain(struct se_cmd *cmd) sg_chain(sg_prev, sg_prev_nents, task->task_sg); chained_nents += task->task_sg_nents; } + /* + * For the padded tasks, use the extra SGL vector allocated + * in transport_allocate_data_tasks() for the sg_prev_nents + * offset into sg_chain() above.. The last task of a + * multi-task list, or a single task will not have + * task->task_sg_padded set.. + */ + if (task->task_padded_sg) + sg_prev_nents = (task->task_sg_nents + 1); + else + sg_prev_nents = task->task_sg_nents; sg_prev = task->task_sg; - sg_prev_nents = task->task_sg_nents; } /* * Setup the starting pointer and total t_tasks_sg_linked_no including @@ -4091,7 +4115,7 @@ static int transport_allocate_data_tasks( cmd_sg = sgl; for (i = 0; i < task_count; i++) { - unsigned int task_size; + unsigned int task_size, task_sg_nents_padded; int count; task = transport_generic_get_task(cmd, data_direction); @@ -4110,30 +4134,33 @@ static int transport_allocate_data_tasks( /* Update new cdb with updated lba/sectors */ cmd->transport_split_cdb(task->task_lba, task->task_sectors, cdb); - + /* + * This now assumes that passed sg_ents are in PAGE_SIZE chunks + * in order to calculate the number per task SGL entries + */ + task->task_sg_nents = DIV_ROUND_UP(task->task_size, PAGE_SIZE); /* * Check if the fabric module driver is requesting that all * struct se_task->task_sg[] be chained together.. If so, * then allocate an extra padding SG entry for linking and - * marking the end of the chained SGL. - * Possibly over-allocate task sgl size by using cmd sgl size. - * It's so much easier and only a waste when task_count > 1. - * That is extremely rare. + * marking the end of the chained SGL for every task except + * the last one for (task_count > 1) operation, or skipping + * the extra padding for the (task_count == 1) case. */ - task->task_sg_nents = sgl_nents; - if (cmd->se_tfo->task_sg_chaining) { - task->task_sg_nents++; + if (cmd->se_tfo->task_sg_chaining && (i < (task_count - 1))) { + task_sg_nents_padded = (task->task_sg_nents + 1); task->task_padded_sg = 1; - } + } else + task_sg_nents_padded = task->task_sg_nents; task->task_sg = kmalloc(sizeof(struct scatterlist) * - task->task_sg_nents, GFP_KERNEL); + task_sg_nents_padded, GFP_KERNEL); if (!task->task_sg) { cmd->se_dev->transport->free_task(task); return -ENOMEM; } - sg_init_table(task->task_sg, task->task_sg_nents); + sg_init_table(task->task_sg, task_sg_nents_padded); task_size = task->task_size; @@ -4230,10 +4257,13 @@ static u32 transport_allocate_tasks( struct scatterlist *sgl, unsigned int sgl_nents) { - if (cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB) + if (cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB) { + if (transport_cmd_get_valid_sectors(cmd) < 0) + return -EINVAL; + return transport_allocate_data_tasks(cmd, lba, data_direction, sgl, sgl_nents); - else + } else return transport_allocate_control_task(cmd); } @@ -4726,6 +4756,13 @@ int transport_send_check_condition_and_sense( */ switch (reason) { case TCM_NON_EXISTENT_LUN: + /* CURRENT ERROR */ + buffer[offset] = 0x70; + /* ILLEGAL REQUEST */ + buffer[offset+SPC_SENSE_KEY_OFFSET] = ILLEGAL_REQUEST; + /* LOGICAL UNIT NOT SUPPORTED */ + buffer[offset+SPC_ASC_KEY_OFFSET] = 0x25; + break; case TCM_UNSUPPORTED_SCSI_OPCODE: case TCM_SECTOR_COUNT_TOO_MANY: /* CURRENT ERROR */ diff --git a/drivers/target/tcm_fc/tcm_fc.h b/drivers/target/tcm_fc/tcm_fc.h index bd4fe21a23b..3749d8b4b42 100644 --- a/drivers/target/tcm_fc/tcm_fc.h +++ b/drivers/target/tcm_fc/tcm_fc.h @@ -98,8 +98,7 @@ struct ft_tpg { struct list_head list; /* linkage in ft_lport_acl tpg_list */ struct list_head lun_list; /* head of LUNs */ struct se_portal_group se_tpg; - struct task_struct *thread; /* processing thread */ - struct se_queue_obj qobj; /* queue for processing thread */ + struct workqueue_struct *workqueue; }; struct ft_lport_acl { @@ -110,16 +109,10 @@ struct ft_lport_acl { struct se_wwn fc_lport_wwn; }; -enum ft_cmd_state { - FC_CMD_ST_NEW = 0, - FC_CMD_ST_REJ -}; - /* * Commands */ struct ft_cmd { - enum ft_cmd_state state; u32 lun; /* LUN from request */ struct ft_sess *sess; /* session held for cmd */ struct fc_seq *seq; /* sequence in exchange mgr */ @@ -127,7 +120,7 @@ struct ft_cmd { struct fc_frame *req_frame; unsigned char *cdb; /* pointer to CDB inside frame */ u32 write_data_len; /* data received on writes */ - struct se_queue_req se_req; + struct work_struct work; /* Local sense buffer */ unsigned char ft_sense_buffer[TRANSPORT_SENSE_BUFFER]; u32 was_ddp_setup:1; /* Set only if ddp is setup */ @@ -177,7 +170,6 @@ int ft_is_state_remove(struct se_cmd *); /* * other internal functions. */ -int ft_thread(void *); void ft_recv_req(struct ft_sess *, struct fc_frame *); struct ft_tpg *ft_lport_find_tpg(struct fc_lport *); struct ft_node_acl *ft_acl_get(struct ft_tpg *, struct fc_rport_priv *); diff --git a/drivers/target/tcm_fc/tfc_cmd.c b/drivers/target/tcm_fc/tfc_cmd.c index 5654dc22f7a..80fbcde00cb 100644 --- a/drivers/target/tcm_fc/tfc_cmd.c +++ b/drivers/target/tcm_fc/tfc_cmd.c @@ -62,8 +62,8 @@ void ft_dump_cmd(struct ft_cmd *cmd, const char *caller) int count; se_cmd = &cmd->se_cmd; - pr_debug("%s: cmd %p state %d sess %p seq %p se_cmd %p\n", - caller, cmd, cmd->state, cmd->sess, cmd->seq, se_cmd); + pr_debug("%s: cmd %p sess %p seq %p se_cmd %p\n", + caller, cmd, cmd->sess, cmd->seq, se_cmd); pr_debug("%s: cmd %p cdb %p\n", caller, cmd, cmd->cdb); pr_debug("%s: cmd %p lun %d\n", caller, cmd, cmd->lun); @@ -90,38 +90,6 @@ void ft_dump_cmd(struct ft_cmd *cmd, const char *caller) 16, 4, cmd->cdb, MAX_COMMAND_SIZE, 0); } -static void ft_queue_cmd(struct ft_sess *sess, struct ft_cmd *cmd) -{ - struct ft_tpg *tpg = sess->tport->tpg; - struct se_queue_obj *qobj = &tpg->qobj; - unsigned long flags; - - qobj = &sess->tport->tpg->qobj; - spin_lock_irqsave(&qobj->cmd_queue_lock, flags); - list_add_tail(&cmd->se_req.qr_list, &qobj->qobj_list); - atomic_inc(&qobj->queue_cnt); - spin_unlock_irqrestore(&qobj->cmd_queue_lock, flags); - - wake_up_process(tpg->thread); -} - -static struct ft_cmd *ft_dequeue_cmd(struct se_queue_obj *qobj) -{ - unsigned long flags; - struct se_queue_req *qr; - - spin_lock_irqsave(&qobj->cmd_queue_lock, flags); - if (list_empty(&qobj->qobj_list)) { - spin_unlock_irqrestore(&qobj->cmd_queue_lock, flags); - return NULL; - } - qr = list_first_entry(&qobj->qobj_list, struct se_queue_req, qr_list); - list_del(&qr->qr_list); - atomic_dec(&qobj->queue_cnt); - spin_unlock_irqrestore(&qobj->cmd_queue_lock, flags); - return container_of(qr, struct ft_cmd, se_req); -} - static void ft_free_cmd(struct ft_cmd *cmd) { struct fc_frame *fp; @@ -282,9 +250,7 @@ u32 ft_get_task_tag(struct se_cmd *se_cmd) int ft_get_cmd_state(struct se_cmd *se_cmd) { - struct ft_cmd *cmd = container_of(se_cmd, struct ft_cmd, se_cmd); - - return cmd->state; + return 0; } int ft_is_state_remove(struct se_cmd *se_cmd) @@ -505,6 +471,8 @@ int ft_queue_tm_resp(struct se_cmd *se_cmd) return 0; } +static void ft_send_work(struct work_struct *work); + /* * Handle incoming FCP command. */ @@ -523,7 +491,9 @@ static void ft_recv_cmd(struct ft_sess *sess, struct fc_frame *fp) goto busy; } cmd->req_frame = fp; /* hold frame during cmd */ - ft_queue_cmd(sess, cmd); + + INIT_WORK(&cmd->work, ft_send_work); + queue_work(sess->tport->tpg->workqueue, &cmd->work); return; busy: @@ -563,12 +533,13 @@ void ft_recv_req(struct ft_sess *sess, struct fc_frame *fp) /* * Send new command to target. */ -static void ft_send_cmd(struct ft_cmd *cmd) +static void ft_send_work(struct work_struct *work) { + struct ft_cmd *cmd = container_of(work, struct ft_cmd, work); struct fc_frame_header *fh = fc_frame_header_get(cmd->req_frame); struct se_cmd *se_cmd; struct fcp_cmnd *fcp; - int data_dir; + int data_dir = 0; u32 data_len; int task_attr; int ret; @@ -675,42 +646,3 @@ static void ft_send_cmd(struct ft_cmd *cmd) err: ft_send_resp_code_and_free(cmd, FCP_CMND_FIELDS_INVALID); } - -/* - * Handle request in the command thread. - */ -static void ft_exec_req(struct ft_cmd *cmd) -{ - pr_debug("cmd state %x\n", cmd->state); - switch (cmd->state) { - case FC_CMD_ST_NEW: - ft_send_cmd(cmd); - break; - default: - break; - } -} - -/* - * Processing thread. - * Currently one thread per tpg. - */ -int ft_thread(void *arg) -{ - struct ft_tpg *tpg = arg; - struct se_queue_obj *qobj = &tpg->qobj; - struct ft_cmd *cmd; - - while (!kthread_should_stop()) { - schedule_timeout_interruptible(MAX_SCHEDULE_TIMEOUT); - if (kthread_should_stop()) - goto out; - - cmd = ft_dequeue_cmd(qobj); - if (cmd) - ft_exec_req(cmd); - } - -out: - return 0; -} diff --git a/drivers/target/tcm_fc/tfc_conf.c b/drivers/target/tcm_fc/tfc_conf.c index 8781d1e423d..8fa39b74f22 100644 --- a/drivers/target/tcm_fc/tfc_conf.c +++ b/drivers/target/tcm_fc/tfc_conf.c @@ -256,7 +256,7 @@ struct ft_node_acl *ft_acl_get(struct ft_tpg *tpg, struct fc_rport_priv *rdata) struct se_portal_group *se_tpg = &tpg->se_tpg; struct se_node_acl *se_acl; - spin_lock_bh(&se_tpg->acl_node_lock); + spin_lock_irq(&se_tpg->acl_node_lock); list_for_each_entry(se_acl, &se_tpg->acl_node_list, acl_list) { acl = container_of(se_acl, struct ft_node_acl, se_node_acl); pr_debug("acl %p port_name %llx\n", @@ -270,7 +270,7 @@ struct ft_node_acl *ft_acl_get(struct ft_tpg *tpg, struct fc_rport_priv *rdata) break; } } - spin_unlock_bh(&se_tpg->acl_node_lock); + spin_unlock_irq(&se_tpg->acl_node_lock); return found; } @@ -327,7 +327,6 @@ static struct se_portal_group *ft_add_tpg( tpg->index = index; tpg->lport_acl = lacl; INIT_LIST_HEAD(&tpg->lun_list); - transport_init_queue_obj(&tpg->qobj); ret = core_tpg_register(&ft_configfs->tf_ops, wwn, &tpg->se_tpg, tpg, TRANSPORT_TPG_TYPE_NORMAL); @@ -336,8 +335,8 @@ static struct se_portal_group *ft_add_tpg( return NULL; } - tpg->thread = kthread_run(ft_thread, tpg, "ft_tpg%lu", index); - if (IS_ERR(tpg->thread)) { + tpg->workqueue = alloc_workqueue("tcm_fc", 0, 1); + if (!tpg->workqueue) { kfree(tpg); return NULL; } @@ -356,7 +355,7 @@ static void ft_del_tpg(struct se_portal_group *se_tpg) pr_debug("del tpg %s\n", config_item_name(&tpg->se_tpg.tpg_group.cg_item)); - kthread_stop(tpg->thread); + destroy_workqueue(tpg->workqueue); /* Wait for sessions to be freed thru RCU, for BUG_ON below */ synchronize_rcu(); @@ -655,9 +654,7 @@ static void __exit ft_exit(void) synchronize_rcu(); } -#ifdef MODULE MODULE_DESCRIPTION("FC TCM fabric driver " FT_VERSION); MODULE_LICENSE("GPL"); module_init(ft_init); module_exit(ft_exit); -#endif /* MODULE */ diff --git a/drivers/target/tcm_fc/tfc_io.c b/drivers/target/tcm_fc/tfc_io.c index c37f4cd9645..d35ea5a3d56 100644 --- a/drivers/target/tcm_fc/tfc_io.c +++ b/drivers/target/tcm_fc/tfc_io.c @@ -219,43 +219,41 @@ void ft_recv_write_data(struct ft_cmd *cmd, struct fc_frame *fp) if (cmd->was_ddp_setup) { BUG_ON(!ep); BUG_ON(!lport); - } - - /* - * Doesn't expect payload if DDP is setup. Payload - * is expected to be copied directly to user buffers - * due to DDP (Large Rx offload), - */ - buf = fc_frame_payload_get(fp, 1); - if (buf) - pr_err("%s: xid 0x%x, f_ctl 0x%x, cmd->sg %p, " + /* + * Since DDP (Large Rx offload) was setup for this request, + * payload is expected to be copied directly to user buffers. + */ + buf = fc_frame_payload_get(fp, 1); + if (buf) + pr_err("%s: xid 0x%x, f_ctl 0x%x, cmd->sg %p, " "cmd->sg_cnt 0x%x. DDP was setup" " hence not expected to receive frame with " - "payload, Frame will be dropped if " - "'Sequence Initiative' bit in f_ctl is " + "payload, Frame will be dropped if" + "'Sequence Initiative' bit in f_ctl is" "not set\n", __func__, ep->xid, f_ctl, cmd->sg, cmd->sg_cnt); - /* - * Invalidate HW DDP context if it was setup for respective - * command. Invalidation of HW DDP context is requited in both - * situation (success and error). - */ - ft_invl_hw_context(cmd); + /* + * Invalidate HW DDP context if it was setup for respective + * command. Invalidation of HW DDP context is requited in both + * situation (success and error). + */ + ft_invl_hw_context(cmd); - /* - * If "Sequence Initiative (TSI)" bit set in f_ctl, means last - * write data frame is received successfully where payload is - * posted directly to user buffer and only the last frame's - * header is posted in receive queue. - * - * If "Sequence Initiative (TSI)" bit is not set, means error - * condition w.r.t. DDP, hence drop the packet and let explict - * ABORTS from other end of exchange timer trigger the recovery. - */ - if (f_ctl & FC_FC_SEQ_INIT) - goto last_frame; - else - goto drop; + /* + * If "Sequence Initiative (TSI)" bit set in f_ctl, means last + * write data frame is received successfully where payload is + * posted directly to user buffer and only the last frame's + * header is posted in receive queue. + * + * If "Sequence Initiative (TSI)" bit is not set, means error + * condition w.r.t. DDP, hence drop the packet and let explict + * ABORTS from other end of exchange timer trigger the recovery. + */ + if (f_ctl & FC_FC_SEQ_INIT) + goto last_frame; + else + goto drop; + } rel_off = ntohl(fh->fh_parm_offset); frame_len = fr_len(fp); diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index 98b6e3bdb00..e809e9d4683 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -446,8 +446,19 @@ static inline void legacy_pty_init(void) { } int pty_limit = NR_UNIX98_PTY_DEFAULT; static int pty_limit_min; static int pty_limit_max = NR_UNIX98_PTY_MAX; +static int tty_count; static int pty_count; +static inline void pty_inc_count(void) +{ + pty_count = (++tty_count) / 2; +} + +static inline void pty_dec_count(void) +{ + pty_count = (--tty_count) / 2; +} + static struct cdev ptmx_cdev; static struct ctl_table pty_table[] = { @@ -542,6 +553,7 @@ static struct tty_struct *pts_unix98_lookup(struct tty_driver *driver, static void pty_unix98_shutdown(struct tty_struct *tty) { + tty_driver_remove_tty(tty->driver, tty); /* We have our own method as we don't use the tty index */ kfree(tty->termios); } @@ -588,7 +600,8 @@ static int pty_unix98_install(struct tty_driver *driver, struct tty_struct *tty) */ tty_driver_kref_get(driver); tty->count++; - pty_count++; + pty_inc_count(); /* tty */ + pty_inc_count(); /* tty->link */ return 0; err_free_mem: deinitialize_tty_struct(o_tty); @@ -602,7 +615,7 @@ err_free_tty: static void pty_unix98_remove(struct tty_driver *driver, struct tty_struct *tty) { - pty_count--; + pty_dec_count(); } static const struct tty_operations ptm_unix98_ops = { diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c index f2dfec82faf..7f50999eebc 100644 --- a/drivers/tty/serial/8250.c +++ b/drivers/tty/serial/8250.c @@ -1819,6 +1819,8 @@ static void serial8250_backup_timeout(unsigned long data) unsigned int iir, ier = 0, lsr; unsigned long flags; + spin_lock_irqsave(&up->port.lock, flags); + /* * Must disable interrupts or else we risk racing with the interrupt * based handler. @@ -1836,10 +1838,8 @@ static void serial8250_backup_timeout(unsigned long data) * the "Diva" UART used on the management processor on many HP * ia64 and parisc boxes. */ - spin_lock_irqsave(&up->port.lock, flags); lsr = serial_in(up, UART_LSR); up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; - spin_unlock_irqrestore(&up->port.lock, flags); if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) && (!uart_circ_empty(&up->port.state->xmit) || up->port.x_char) && (lsr & UART_LSR_THRE)) { @@ -1848,11 +1848,13 @@ static void serial8250_backup_timeout(unsigned long data) } if (!(iir & UART_IIR_NO_INT)) - serial8250_handle_port(up); + transmit_chars(up); if (is_real_interrupt(up->port.irq)) serial_out(up, UART_IER, ier); + spin_unlock_irqrestore(&up->port.lock, flags); + /* Standard timer interval plus 0.2s to keep the port running */ mod_timer(&up->timer, jiffies + uart_poll_timeout(&up->port) + HZ / 5); diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c index 6b887d90a20..3abeca2a2a1 100644 --- a/drivers/tty/serial/8250_pci.c +++ b/drivers/tty/serial/8250_pci.c @@ -1599,11 +1599,6 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .device = 0x800D, .init = pci_eg20t_init, }, - { - .vendor = 0x10DB, - .device = 0x800D, - .init = pci_eg20t_init, - }, /* * Cronyx Omega PCI (PLX-chip based) */ @@ -4021,7 +4016,7 @@ static struct pci_device_id serial_pci_tbl[] = { 0, 0, pbn_NETMOS9900_2s_115200 }, /* - * Best Connectivity PCI Multi I/O cards + * Best Connectivity and Rosewill PCI Multi I/O cards */ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, @@ -4029,6 +4024,10 @@ static struct pci_device_id serial_pci_tbl[] = { 0, 0, pbn_b0_1_115200 }, { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, + 0xA000, 0x3002, + 0, 0, pbn_b0_bt_2_115200 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, 0xA000, 0x3004, 0, 0, pbn_b0_bt_4_115200 }, /* Intel CE4100 */ diff --git a/drivers/tty/serial/8250_pnp.c b/drivers/tty/serial/8250_pnp.c index fc301f6722e..a2f236510ff 100644 --- a/drivers/tty/serial/8250_pnp.c +++ b/drivers/tty/serial/8250_pnp.c @@ -109,6 +109,9 @@ static const struct pnp_device_id pnp_dev_table[] = { /* IBM */ /* IBM Thinkpad 701 Internal Modem Voice */ { "IBM0033", 0 }, + /* Intermec */ + /* Intermec CV60 touchscreen port */ + { "PNP4972", 0 }, /* Intertex */ /* Intertex 28k8 33k6 Voice EXT PnP */ { "IXDC801", 0 }, diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index af9b7814965..b922f5d2e61 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1609,9 +1609,11 @@ static struct console atmel_console = { static int __init atmel_console_init(void) { if (atmel_default_console_device) { - add_preferred_console(ATMEL_DEVICENAME, - atmel_default_console_device->id, NULL); - atmel_init_port(&atmel_ports[atmel_default_console_device->id], + struct atmel_uart_data *pdata = + atmel_default_console_device->dev.platform_data; + + add_preferred_console(ATMEL_DEVICENAME, pdata->num, NULL); + atmel_init_port(&atmel_ports[pdata->num], atmel_default_console_device); register_console(&atmel_console); } diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c index 225123b37f1..58be715913c 100644 --- a/drivers/tty/serial/crisv10.c +++ b/drivers/tty/serial/crisv10.c @@ -4450,7 +4450,7 @@ static int __init rs_init(void) #if defined(CONFIG_ETRAX_RS485) #if defined(CONFIG_ETRAX_RS485_ON_PA) - if (cris_io_interface_allocate_pins(if_ser0, 'a', rs485_pa_bit, + if (cris_io_interface_allocate_pins(if_serial_0, 'a', rs485_pa_bit, rs485_pa_bit)) { printk(KERN_CRIT "ETRAX100LX serial: Could not allocate " "RS485 pin\n"); @@ -4459,7 +4459,7 @@ static int __init rs_init(void) } #endif #if defined(CONFIG_ETRAX_RS485_ON_PORT_G) - if (cris_io_interface_allocate_pins(if_ser0, 'g', rs485_pa_bit, + if (cris_io_interface_allocate_pins(if_serial_0, 'g', rs485_pa_bit, rs485_port_g_bit)) { printk(KERN_CRIT "ETRAX100LX serial: Could not allocate " "RS485 pin\n"); diff --git a/drivers/tty/serial/max3107-aava.c b/drivers/tty/serial/max3107-aava.c index a1fe304f2f5..d73aadd7a9a 100644 --- a/drivers/tty/serial/max3107-aava.c +++ b/drivers/tty/serial/max3107-aava.c @@ -340,5 +340,5 @@ module_exit(max3107_exit); MODULE_DESCRIPTION("MAX3107 driver"); MODULE_AUTHOR("Aavamobile"); -MODULE_ALIAS("aava-max3107-spi"); +MODULE_ALIAS("spi:aava-max3107"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/max3107.c b/drivers/tty/serial/max3107.c index 750b4f62731..a8164601c0e 100644 --- a/drivers/tty/serial/max3107.c +++ b/drivers/tty/serial/max3107.c @@ -1209,5 +1209,5 @@ module_exit(max3107_exit); MODULE_DESCRIPTION("MAX3107 driver"); MODULE_AUTHOR("Aavamobile"); -MODULE_ALIAS("max3107-spi"); +MODULE_ALIAS("spi:max3107"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c index a764bf99743..23bc743f2a2 100644 --- a/drivers/tty/serial/mrst_max3110.c +++ b/drivers/tty/serial/mrst_max3110.c @@ -917,4 +917,4 @@ module_init(serial_m3110_init); module_exit(serial_m3110_exit); MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("max3110-uart"); +MODULE_ALIAS("spi:max3110-uart"); diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index c37df8d0fa2..5e713d3ef1f 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -806,8 +806,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, serial_omap_set_mctrl(&up->port, up->port.mctrl); /* Software Flow Control Configuration */ - if (termios->c_iflag & (IXON | IXOFF)) - serial_omap_configure_xonxoff(up, termios); + serial_omap_configure_xonxoff(up, termios); spin_unlock_irqrestore(&up->port.lock, flags); dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->pdev->id); diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 846dfcd3ce0..b46218d679e 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -598,7 +598,8 @@ static void pch_request_dma(struct uart_port *port) dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); - dma_dev = pci_get_bus_and_slot(2, PCI_DEVFN(0xa, 0)); /* Get DMA's dev + dma_dev = pci_get_bus_and_slot(priv->pdev->bus->number, + PCI_DEVFN(0xa, 0)); /* Get DMA's dev information */ /* Set Tx DMA */ param = &priv->param_tx; diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index afc62942315..6edafb5ace1 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -1225,15 +1225,19 @@ static const struct dev_pm_ops s3c24xx_serial_pm_ops = { .suspend = s3c24xx_serial_suspend, .resume = s3c24xx_serial_resume, }; +#define SERIAL_SAMSUNG_PM_OPS (&s3c24xx_serial_pm_ops) + #else /* !CONFIG_PM_SLEEP */ -#define s3c24xx_serial_pm_ops NULL + +#define SERIAL_SAMSUNG_PM_OPS NULL #endif /* CONFIG_PM_SLEEP */ int s3c24xx_serial_init(struct platform_driver *drv, struct s3c24xx_uart_info *info) { dbg("s3c24xx_serial_init(%p,%p)\n", drv, info); - drv->driver.pm = &s3c24xx_serial_pm_ops; + + drv->driver.pm = SERIAL_SAMSUNG_PM_OPS; return platform_driver_register(drv); } diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index db7912cb7ae..a3efbea5dbb 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -200,6 +200,11 @@ static int uart_startup(struct tty_struct *tty, struct uart_state *state, int in clear_bit(TTY_IO_ERROR, &tty->flags); } + /* + * This is to allow setserial on this port. People may want to set + * port/irq/type and then reconfigure the port properly if it failed + * now. + */ if (retval && capable(CAP_SYS_ADMIN)) retval = 0; diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 2ec57b2fb27..5ea6ec3442e 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -47,6 +47,7 @@ #include <linux/ctype.h> #include <linux/err.h> #include <linux/dmaengine.h> +#include <linux/dma-mapping.h> #include <linux/scatterlist.h> #include <linux/slab.h> @@ -95,6 +96,12 @@ struct sci_port { #endif struct notifier_block freq_transition; + +#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE + unsigned short saved_smr; + unsigned short saved_fcr; + unsigned char saved_brr; +#endif }; /* Function prototypes */ @@ -1076,7 +1083,7 @@ static unsigned int sci_get_mctrl(struct uart_port *port) /* This routine is used for getting signals of: DTR, DCD, DSR, RI, and CTS/RTS */ - return TIOCM_DTR | TIOCM_RTS | TIOCM_DSR; + return TIOCM_DTR | TIOCM_RTS | TIOCM_CTS | TIOCM_DSR; } #ifdef CONFIG_SERIAL_SH_SCI_DMA @@ -1633,11 +1640,25 @@ static unsigned int sci_scbrr_calc(unsigned int algo_id, unsigned int bps, return ((freq + 16 * bps) / (32 * bps) - 1); } +static void sci_reset(struct uart_port *port) +{ + unsigned int status; + + do { + status = sci_in(port, SCxSR); + } while (!(status & SCxSR_TEND(port))); + + sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ + + if (port->type != PORT_SCI) + sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST); +} + static void sci_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { struct sci_port *s = to_sci_port(port); - unsigned int status, baud, smr_val, max_baud; + unsigned int baud, smr_val, max_baud; int t = -1; u16 scfcr = 0; @@ -1657,14 +1678,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, sci_port_enable(s); - do { - status = sci_in(port, SCxSR); - } while (!(status & SCxSR_TEND(port))); - - sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ - - if (port->type != PORT_SCI) - sci_out(port, SCFCR, scfcr | SCFCR_RFRST | SCFCR_TFRST); + sci_reset(port); smr_val = sci_in(port, SCSMR) & 3; @@ -1913,6 +1927,7 @@ static int __devinit sci_init_single(struct platform_device *dev, port->dev = &dev->dev; + pm_runtime_irq_safe(&dev->dev); pm_runtime_enable(&dev->dev); } @@ -2036,7 +2051,8 @@ static int __devinit serial_console_setup(struct console *co, char *options) if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); - /* TODO: disable clock */ + sci_port_disable(sci_port); + return uart_set_options(port, co, baud, parity, bits, flow); } @@ -2079,6 +2095,36 @@ static int __devinit sci_probe_earlyprintk(struct platform_device *pdev) return 0; } +#define uart_console(port) ((port)->cons->index == (port)->line) + +static int sci_runtime_suspend(struct device *dev) +{ + struct sci_port *sci_port = dev_get_drvdata(dev); + struct uart_port *port = &sci_port->port; + + if (uart_console(port)) { + sci_port->saved_smr = sci_in(port, SCSMR); + sci_port->saved_brr = sci_in(port, SCBRR); + sci_port->saved_fcr = sci_in(port, SCFCR); + } + return 0; +} + +static int sci_runtime_resume(struct device *dev) +{ + struct sci_port *sci_port = dev_get_drvdata(dev); + struct uart_port *port = &sci_port->port; + + if (uart_console(port)) { + sci_reset(port); + sci_out(port, SCSMR, sci_port->saved_smr); + sci_out(port, SCBRR, sci_port->saved_brr); + sci_out(port, SCFCR, sci_port->saved_fcr); + sci_out(port, SCSCR, sci_port->cfg->scscr); + } + return 0; +} + #define SCI_CONSOLE (&serial_console) #else @@ -2088,6 +2134,8 @@ static inline int __devinit sci_probe_earlyprintk(struct platform_device *pdev) } #define SCI_CONSOLE NULL +#define sci_runtime_suspend NULL +#define sci_runtime_resume NULL #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */ @@ -2203,6 +2251,8 @@ static int sci_resume(struct device *dev) } static const struct dev_pm_ops sci_dev_pm_ops = { + .runtime_suspend = sci_runtime_suspend, + .runtime_resume = sci_runtime_resume, .suspend = sci_suspend, .resume = sci_resume, }; diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c index c327218cad4..9af9f0879a2 100644 --- a/drivers/tty/serial/ucc_uart.c +++ b/drivers/tty/serial/ucc_uart.c @@ -235,7 +235,7 @@ static inline void *qe2cpu_addr(dma_addr_t addr, struct uart_qe_port *qe_port) return qe_port->bd_virt + (addr - qe_port->bd_dma_addr); /* something nasty happened */ - printk(KERN_ERR "%s: addr=%x\n", __func__, addr); + printk(KERN_ERR "%s: addr=%llx\n", __func__, (u64)addr); BUG(); return NULL; } diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 150e4f747c7..4f1fc81112e 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -1295,8 +1295,7 @@ static int tty_driver_install_tty(struct tty_driver *driver, * * Locking: tty_mutex for now */ -static void tty_driver_remove_tty(struct tty_driver *driver, - struct tty_struct *tty) +void tty_driver_remove_tty(struct tty_driver *driver, struct tty_struct *tty) { if (driver->ops->remove) driver->ops->remove(driver, tty); diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 8669ba3fe79..73cbbd85219 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1775,6 +1775,8 @@ int usb_hcd_alloc_bandwidth(struct usb_device *udev, struct usb_interface *iface = usb_ifnum_to_if(udev, cur_alt->desc.bInterfaceNumber); + if (!iface) + return -EINVAL; if (iface->resetting_device) { /* * The USB core just reset the device, so the xHCI host diff --git a/drivers/usb/gadget/f_phonet.c b/drivers/usb/gadget/f_phonet.c index 8f8d3f6cd89..8f3eab1af88 100644 --- a/drivers/usb/gadget/f_phonet.c +++ b/drivers/usb/gadget/f_phonet.c @@ -434,6 +434,7 @@ static int pn_set_alt(struct usb_function *f, unsigned intf, unsigned alt) config_ep_by_speed(gadget, f, fp->out_ep)) { fp->in_ep->desc = NULL; fp->out_ep->desc = NULL; + spin_unlock(&port->lock); return -EINVAL; } usb_ep_enable(fp->out_ep); diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index e051b30c184..4c32cb19b40 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -343,7 +343,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd) u32 temp; u32 power_okay; int i; - u8 resume_needed = 0; + unsigned long resume_needed = 0; if (time_before (jiffies, ehci->next_statechange)) msleep(5); @@ -416,7 +416,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd) if (test_bit(i, &ehci->bus_suspended) && (temp & PORT_SUSPEND)) { temp |= PORT_RESUME; - resume_needed = 1; + set_bit(i, &resume_needed); } ehci_writel(ehci, temp, &ehci->regs->port_status [i]); } @@ -431,8 +431,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd) i = HCS_N_PORTS (ehci->hcs_params); while (i--) { temp = ehci_readl(ehci, &ehci->regs->port_status [i]); - if (test_bit(i, &ehci->bus_suspended) && - (temp & PORT_SUSPEND)) { + if (test_bit(i, &resume_needed)) { temp &= ~(PORT_RWC_BITS | PORT_RESUME); ehci_writel(ehci, temp, &ehci->regs->port_status [i]); ehci_vdbg (ehci, "resumed port %d\n", i + 1); diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c index b3958b3d316..9e77f1c8bdb 100644 --- a/drivers/usb/host/ehci-s5p.c +++ b/drivers/usb/host/ehci-s5p.c @@ -86,6 +86,7 @@ static int __devinit s5p_ehci_probe(struct platform_device *pdev) goto fail_hcd; } + s5p_ehci->hcd = hcd; s5p_ehci->clk = clk_get(&pdev->dev, "usbhost"); if (IS_ERR(s5p_ehci->clk)) { diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 0be788cc2fd..723f8231193 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -463,11 +463,12 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, && (temp & PORT_POWER)) status |= USB_PORT_STAT_SUSPEND; } - if ((temp & PORT_PLS_MASK) == XDEV_RESUME) { + if ((temp & PORT_PLS_MASK) == XDEV_RESUME && + !DEV_SUPERSPEED(temp)) { if ((temp & PORT_RESET) || !(temp & PORT_PE)) goto error; - if (!DEV_SUPERSPEED(temp) && time_after_eq(jiffies, - bus_state->resume_done[wIndex])) { + if (time_after_eq(jiffies, + bus_state->resume_done[wIndex])) { xhci_dbg(xhci, "Resume USB2 port %d\n", wIndex + 1); bus_state->resume_done[wIndex] = 0; @@ -487,6 +488,14 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, xhci_ring_device(xhci, slot_id); bus_state->port_c_suspend |= 1 << wIndex; bus_state->suspended_ports &= ~(1 << wIndex); + } else { + /* + * The resume has been signaling for less than + * 20ms. Report the port status as SUSPEND, + * let the usbcore check port status again + * and clear resume signaling later. + */ + status |= USB_PORT_STAT_SUSPEND; } } if ((temp & PORT_PLS_MASK) == XDEV_U0 @@ -664,7 +673,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, xhci_dbg(xhci, "PORTSC %04x\n", temp); if (temp & PORT_RESET) goto error; - if (temp & XDEV_U3) { + if ((temp & PORT_PLS_MASK) == XDEV_U3) { if ((temp & PORT_PE) == 0) goto error; @@ -752,7 +761,7 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) memset(buf, 0, retval); status = 0; - mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC; + mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC; spin_lock_irqsave(&xhci->lock, flags); /* For each port, did anything change? If so, set that bit in buf. */ diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 7113d16e2d3..952e2ded61a 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -514,8 +514,12 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, (unsigned long long) addr); } +/* flip_cycle means flip the cycle bit of all but the first and last TRB. + * (The last TRB actually points to the ring enqueue pointer, which is not part + * of this TD.) This is used to remove partially enqueued isoc TDs from a ring. + */ static void td_to_noop(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, - struct xhci_td *cur_td) + struct xhci_td *cur_td, bool flip_cycle) { struct xhci_segment *cur_seg; union xhci_trb *cur_trb; @@ -528,6 +532,12 @@ static void td_to_noop(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, * leave the pointers intact. */ cur_trb->generic.field[3] &= cpu_to_le32(~TRB_CHAIN); + /* Flip the cycle bit (link TRBs can't be the first + * or last TRB). + */ + if (flip_cycle) + cur_trb->generic.field[3] ^= + cpu_to_le32(TRB_CYCLE); xhci_dbg(xhci, "Cancel (unchain) link TRB\n"); xhci_dbg(xhci, "Address = %p (0x%llx dma); " "in seg %p (0x%llx dma)\n", @@ -541,6 +551,11 @@ static void td_to_noop(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, cur_trb->generic.field[2] = 0; /* Preserve only the cycle bit of this TRB */ cur_trb->generic.field[3] &= cpu_to_le32(TRB_CYCLE); + /* Flip the cycle bit except on the first or last TRB */ + if (flip_cycle && cur_trb != cur_td->first_trb && + cur_trb != cur_td->last_trb) + cur_trb->generic.field[3] ^= + cpu_to_le32(TRB_CYCLE); cur_trb->generic.field[3] |= cpu_to_le32( TRB_TYPE(TRB_TR_NOOP)); xhci_dbg(xhci, "Cancel TRB %p (0x%llx dma) " @@ -719,14 +734,14 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci, cur_td->urb->stream_id, cur_td, &deq_state); else - td_to_noop(xhci, ep_ring, cur_td); + td_to_noop(xhci, ep_ring, cur_td, false); remove_finished_td: /* * The event handler won't see a completion for this TD anymore, * so remove it from the endpoint ring's TD list. Keep it in * the cancelled TD list for URB completion later. */ - list_del(&cur_td->td_list); + list_del_init(&cur_td->td_list); } last_unlinked_td = cur_td; xhci_stop_watchdog_timer_in_irq(xhci, ep); @@ -754,7 +769,7 @@ remove_finished_td: do { cur_td = list_entry(ep->cancelled_td_list.next, struct xhci_td, cancelled_td_list); - list_del(&cur_td->cancelled_td_list); + list_del_init(&cur_td->cancelled_td_list); /* Clean up the cancelled URB */ /* Doesn't matter what we pass for status, since the core will @@ -862,9 +877,9 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) cur_td = list_first_entry(&ring->td_list, struct xhci_td, td_list); - list_del(&cur_td->td_list); + list_del_init(&cur_td->td_list); if (!list_empty(&cur_td->cancelled_td_list)) - list_del(&cur_td->cancelled_td_list); + list_del_init(&cur_td->cancelled_td_list); xhci_giveback_urb_in_irq(xhci, cur_td, -ESHUTDOWN, "killed"); } @@ -873,7 +888,7 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) &temp_ep->cancelled_td_list, struct xhci_td, cancelled_td_list); - list_del(&cur_td->cancelled_td_list); + list_del_init(&cur_td->cancelled_td_list); xhci_giveback_urb_in_irq(xhci, cur_td, -ESHUTDOWN, "killed"); } @@ -1565,10 +1580,10 @@ td_cleanup: else *status = 0; } - list_del(&td->td_list); + list_del_init(&td->td_list); /* Was this TD slated to be cancelled but completed anyway? */ if (!list_empty(&td->cancelled_td_list)) - list_del(&td->cancelled_td_list); + list_del_init(&td->cancelled_td_list); urb_priv->td_cnt++; /* Giveback the urb when all the tds are completed */ @@ -1919,8 +1934,10 @@ static int handle_tx_event(struct xhci_hcd *xhci, int status = -EINPROGRESS; struct urb_priv *urb_priv; struct xhci_ep_ctx *ep_ctx; + struct list_head *tmp; u32 trb_comp_code; int ret = 0; + int td_num = 0; slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags)); xdev = xhci->devs[slot_id]; @@ -1942,6 +1959,12 @@ static int handle_tx_event(struct xhci_hcd *xhci, return -ENODEV; } + /* Count current td numbers if ep->skip is set */ + if (ep->skip) { + list_for_each(tmp, &ep_ring->td_list) + td_num++; + } + event_dma = le64_to_cpu(event->buffer); trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len)); /* Look for common error cases */ @@ -2053,7 +2076,18 @@ static int handle_tx_event(struct xhci_hcd *xhci, goto cleanup; } + /* We've skipped all the TDs on the ep ring when ep->skip set */ + if (ep->skip && td_num == 0) { + ep->skip = false; + xhci_dbg(xhci, "All tds on the ep_ring skipped. " + "Clear skip flag.\n"); + ret = 0; + goto cleanup; + } + td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list); + if (ep->skip) + td_num--; /* Is this a TRB in the currently executing TD? */ event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue, @@ -2500,11 +2534,8 @@ static int prepare_transfer(struct xhci_hcd *xhci, if (td_index == 0) { ret = usb_hcd_link_urb_to_ep(bus_to_hcd(urb->dev->bus), urb); - if (unlikely(ret)) { - xhci_urb_free_priv(xhci, urb_priv); - urb->hcpriv = NULL; + if (unlikely(ret)) return ret; - } } td->urb = urb; @@ -2672,6 +2703,10 @@ static u32 xhci_v1_0_td_remainder(int running_total, int trb_buff_len, { int packets_transferred; + /* One TRB with a zero-length data packet. */ + if (running_total == 0 && trb_buff_len == 0) + return 0; + /* All the TRB queueing functions don't count the current TRB in * running_total. */ @@ -3113,20 +3148,15 @@ static int count_isoc_trbs_needed(struct xhci_hcd *xhci, struct urb *urb, int i) { int num_trbs = 0; - u64 addr, td_len, running_total; + u64 addr, td_len; addr = (u64) (urb->transfer_dma + urb->iso_frame_desc[i].offset); td_len = urb->iso_frame_desc[i].length; - running_total = TRB_MAX_BUFF_SIZE - (addr & (TRB_MAX_BUFF_SIZE - 1)); - running_total &= TRB_MAX_BUFF_SIZE - 1; - if (running_total != 0) - num_trbs++; - - while (running_total < td_len) { + num_trbs = DIV_ROUND_UP(td_len + (addr & (TRB_MAX_BUFF_SIZE - 1)), + TRB_MAX_BUFF_SIZE); + if (num_trbs == 0) num_trbs++; - running_total += TRB_MAX_BUFF_SIZE; - } return num_trbs; } @@ -3226,6 +3256,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, start_trb = &ep_ring->enqueue->generic; start_cycle = ep_ring->cycle_state; + urb_priv = urb->hcpriv; /* Queue the first TRB, even if it's zero-length */ for (i = 0; i < num_tds; i++) { unsigned int total_packet_count; @@ -3237,9 +3268,11 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, addr = start_addr + urb->iso_frame_desc[i].offset; td_len = urb->iso_frame_desc[i].length; td_remain_len = td_len; - /* FIXME: Ignoring zero-length packets, can those happen? */ total_packet_count = roundup(td_len, le16_to_cpu(urb->ep->desc.wMaxPacketSize)); + /* A zero-length transfer still involves at least one packet. */ + if (total_packet_count == 0) + total_packet_count++; burst_count = xhci_get_burst_count(xhci, urb->dev, urb, total_packet_count); residue = xhci_get_last_burst_packet_count(xhci, @@ -3249,12 +3282,13 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index, urb->stream_id, trbs_per_td, urb, i, mem_flags); - if (ret < 0) - return ret; + if (ret < 0) { + if (i == 0) + return ret; + goto cleanup; + } - urb_priv = urb->hcpriv; td = urb_priv->td[i]; - for (j = 0; j < trbs_per_td; j++) { u32 remainder = 0; field = TRB_TBC(burst_count) | TRB_TLBPC(residue); @@ -3344,6 +3378,27 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id, start_cycle, start_trb); return 0; +cleanup: + /* Clean up a partially enqueued isoc transfer. */ + + for (i--; i >= 0; i--) + list_del_init(&urb_priv->td[i]->td_list); + + /* Use the first TD as a temporary variable to turn the TDs we've queued + * into No-ops with a software-owned cycle bit. That way the hardware + * won't accidentally start executing bogus TDs when we partially + * overwrite them. td->first_trb and td->start_seg are already set. + */ + urb_priv->td[0]->last_trb = ep_ring->enqueue; + /* Every TRB except the first & last will have its cycle bit flipped. */ + td_to_noop(xhci, ep_ring, urb_priv->td[0], true); + + /* Reset the ring enqueue back to the first TRB and its cycle bit. */ + ep_ring->enqueue = urb_priv->td[0]->first_trb; + ep_ring->enq_seg = urb_priv->td[0]->start_seg; + ep_ring->cycle_state = start_cycle; + usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb); + return ret; } /* diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 1c4432d8fc1..3a0f695138f 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1085,8 +1085,11 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) if (urb->dev->speed == USB_SPEED_FULL) { ret = xhci_check_maxpacket(xhci, slot_id, ep_index, urb); - if (ret < 0) + if (ret < 0) { + xhci_urb_free_priv(xhci, urb_priv); + urb->hcpriv = NULL; return ret; + } } /* We have a spinlock and interrupts disabled, so we must pass @@ -1097,6 +1100,8 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) goto dying; ret = xhci_queue_ctrl_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index); + if (ret) + goto free_priv; spin_unlock_irqrestore(&xhci->lock, flags); } else if (usb_endpoint_xfer_bulk(&urb->ep->desc)) { spin_lock_irqsave(&xhci->lock, flags); @@ -1117,6 +1122,8 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) ret = xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index); } + if (ret) + goto free_priv; spin_unlock_irqrestore(&xhci->lock, flags); } else if (usb_endpoint_xfer_int(&urb->ep->desc)) { spin_lock_irqsave(&xhci->lock, flags); @@ -1124,6 +1131,8 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) goto dying; ret = xhci_queue_intr_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index); + if (ret) + goto free_priv; spin_unlock_irqrestore(&xhci->lock, flags); } else { spin_lock_irqsave(&xhci->lock, flags); @@ -1131,18 +1140,22 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) goto dying; ret = xhci_queue_isoc_tx_prepare(xhci, GFP_ATOMIC, urb, slot_id, ep_index); + if (ret) + goto free_priv; spin_unlock_irqrestore(&xhci->lock, flags); } exit: return ret; dying: - xhci_urb_free_priv(xhci, urb_priv); - urb->hcpriv = NULL; xhci_dbg(xhci, "Ep 0x%x: URB %p submitted for " "non-responsive xHCI host.\n", urb->ep->desc.bEndpointAddress, urb); + ret = -ESHUTDOWN; +free_priv: + xhci_urb_free_priv(xhci, urb_priv); + urb->hcpriv = NULL; spin_unlock_irqrestore(&xhci->lock, flags); - return -ESHUTDOWN; + return ret; } /* Get the right ring for the given URB. @@ -1239,6 +1252,13 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) if (temp == 0xffffffff || (xhci->xhc_state & XHCI_STATE_HALTED)) { xhci_dbg(xhci, "HW died, freeing TD.\n"); urb_priv = urb->hcpriv; + for (i = urb_priv->td_cnt; i < urb_priv->length; i++) { + td = urb_priv->td[i]; + if (!list_empty(&td->td_list)) + list_del_init(&td->td_list); + if (!list_empty(&td->cancelled_td_list)) + list_del_init(&td->cancelled_td_list); + } usb_hcd_unlink_urb_from_ep(hcd, urb); spin_unlock_irqrestore(&xhci->lock, flags); diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index ae8c3961774..5e7cfba5b07 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -17,6 +17,7 @@ #include <linux/io.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/prefetch.h> #include <asm/cacheflush.h> diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index 149f3f310a0..318fb4e8a88 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -226,8 +226,10 @@ static int cppi_controller_stop(struct dma_controller *c) struct cppi *controller; void __iomem *tibase; int i; + struct musb *musb; controller = container_of(c, struct cppi, controller); + musb = controller->musb; tibase = controller->tibase; /* DISABLE INDIVIDUAL CHANNEL Interrupts */ @@ -289,9 +291,11 @@ cppi_channel_allocate(struct dma_controller *c, u8 index; struct cppi_channel *cppi_ch; void __iomem *tibase; + struct musb *musb; controller = container_of(c, struct cppi, controller); tibase = controller->tibase; + musb = controller->musb; /* ep0 doesn't use DMA; remember cppi indices are 0..N-1 */ index = ep->epnum - 1; @@ -339,7 +343,8 @@ static void cppi_channel_release(struct dma_channel *channel) c = container_of(channel, struct cppi_channel, channel); tibase = c->controller->tibase; if (!c->hw_ep) - dev_dbg(musb->controller, "releasing idle DMA channel %p\n", c); + dev_dbg(c->controller->musb->controller, + "releasing idle DMA channel %p\n", c); else if (!c->transmit) core_rxirq_enable(tibase, c->index + 1); @@ -357,10 +362,11 @@ cppi_dump_rx(int level, struct cppi_channel *c, const char *tag) musb_ep_select(base, c->index + 1); - DBG(level, "RX DMA%d%s: %d left, csr %04x, " - "%08x H%08x S%08x C%08x, " - "B%08x L%08x %08x .. %08x" - "\n", + dev_dbg(c->controller->musb->controller, + "RX DMA%d%s: %d left, csr %04x, " + "%08x H%08x S%08x C%08x, " + "B%08x L%08x %08x .. %08x" + "\n", c->index, tag, musb_readl(c->controller->tibase, DAVINCI_RXCPPI_BUFCNT0_REG + 4 * c->index), @@ -387,10 +393,11 @@ cppi_dump_tx(int level, struct cppi_channel *c, const char *tag) musb_ep_select(base, c->index + 1); - DBG(level, "TX DMA%d%s: csr %04x, " - "H%08x S%08x C%08x %08x, " - "F%08x L%08x .. %08x" - "\n", + dev_dbg(c->controller->musb->controller, + "TX DMA%d%s: csr %04x, " + "H%08x S%08x C%08x %08x, " + "F%08x L%08x .. %08x" + "\n", c->index, tag, musb_readw(c->hw_ep->regs, MUSB_TXCSR), @@ -1022,6 +1029,7 @@ static bool cppi_rx_scan(struct cppi *cppi, unsigned ch) int i; dma_addr_t safe2ack; void __iomem *regs = rx->hw_ep->regs; + struct musb *musb = cppi->musb; cppi_dump_rx(6, rx, "/K"); diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 668eeef601a..b3c065ab9db 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -172,7 +172,8 @@ enum musb_g_ep0_state { #endif /* TUSB mapping: "flat" plus ep0 special cases */ -#if defined(CONFIG_USB_MUSB_TUSB6010) +#if defined(CONFIG_USB_MUSB_TUSB6010) || \ + defined(CONFIG_USB_MUSB_TUSB6010_MODULE) #define musb_ep_select(_mbase, _epnum) \ musb_writeb((_mbase), MUSB_INDEX, (_epnum)) #define MUSB_EP_OFFSET MUSB_TUSB_OFFSET @@ -241,7 +242,8 @@ struct musb_hw_ep { void __iomem *fifo; void __iomem *regs; -#ifdef CONFIG_USB_MUSB_TUSB6010 +#if defined(CONFIG_USB_MUSB_TUSB6010) || \ + defined(CONFIG_USB_MUSB_TUSB6010_MODULE) void __iomem *conf; #endif @@ -258,7 +260,8 @@ struct musb_hw_ep { struct dma_channel *tx_channel; struct dma_channel *rx_channel; -#ifdef CONFIG_USB_MUSB_TUSB6010 +#if defined(CONFIG_USB_MUSB_TUSB6010) || \ + defined(CONFIG_USB_MUSB_TUSB6010_MODULE) /* TUSB has "asynchronous" and "synchronous" dma modes */ dma_addr_t fifo_async; dma_addr_t fifo_sync; @@ -356,7 +359,8 @@ struct musb { void __iomem *ctrl_base; void __iomem *mregs; -#ifdef CONFIG_USB_MUSB_TUSB6010 +#if defined(CONFIG_USB_MUSB_TUSB6010) || \ + defined(CONFIG_USB_MUSB_TUSB6010_MODULE) dma_addr_t async; dma_addr_t sync; void __iomem *sync_va; diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 8c41a2e6ea7..e81820370d6 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1856,6 +1856,7 @@ int __init musb_gadget_setup(struct musb *musb) return 0; err: + musb->g.dev.parent = NULL; device_unregister(&musb->g.dev); return status; } @@ -1863,7 +1864,8 @@ err: void musb_gadget_cleanup(struct musb *musb) { usb_del_gadget_udc(&musb->g); - device_unregister(&musb->g.dev); + if (musb->g.dev.parent) + device_unregister(&musb->g.dev); } /* diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h index 82410703dcd..03f2655af29 100644 --- a/drivers/usb/musb/musb_regs.h +++ b/drivers/usb/musb/musb_regs.h @@ -234,7 +234,8 @@ #define MUSB_TESTMODE 0x0F /* 8 bit */ /* Get offset for a given FIFO from musb->mregs */ -#ifdef CONFIG_USB_MUSB_TUSB6010 +#if defined(CONFIG_USB_MUSB_TUSB6010) || \ + defined(CONFIG_USB_MUSB_TUSB6010_MODULE) #define MUSB_FIFO_OFFSET(epnum) (0x200 + ((epnum) * 0x20)) #else #define MUSB_FIFO_OFFSET(epnum) (0x20 + ((epnum) * 4)) @@ -295,7 +296,8 @@ #define MUSB_FLAT_OFFSET(_epnum, _offset) \ (0x100 + (0x10*(_epnum)) + (_offset)) -#ifdef CONFIG_USB_MUSB_TUSB6010 +#if defined(CONFIG_USB_MUSB_TUSB6010) || \ + defined(CONFIG_USB_MUSB_TUSB6010_MODULE) /* TUSB6010 EP0 configuration register is special */ #define MUSB_TUSB_OFFSET(_epnum, _offset) \ (0x10 + _offset) diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index 9eec41fbf3a..ec1480191f7 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -18,6 +18,7 @@ #include <linux/kernel.h> #include <linux/errno.h> #include <linux/init.h> +#include <linux/prefetch.h> #include <linux/usb.h> #include <linux/irq.h> #include <linux/platform_device.h> diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c index 07c8a73dfe4..b67b4bc596c 100644 --- a/drivers/usb/musb/tusb6010_omap.c +++ b/drivers/usb/musb/tusb6010_omap.c @@ -20,6 +20,7 @@ #include <plat/mux.h> #include "musb_core.h" +#include "tusb6010.h" #define to_chdat(c) ((struct tusb_omap_dma_ch *)(c)->private_data) diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c index cecace41183..ef4333f4bbe 100644 --- a/drivers/usb/musb/ux500_dma.c +++ b/drivers/usb/musb/ux500_dma.c @@ -65,7 +65,8 @@ static void ux500_tx_work(struct work_struct *data) struct musb *musb = hw_ep->musb; unsigned long flags; - DBG(4, "DMA tx transfer done on hw_ep=%d\n", hw_ep->epnum); + dev_dbg(musb->controller, "DMA tx transfer done on hw_ep=%d\n", + hw_ep->epnum); spin_lock_irqsave(&musb->lock, flags); ux500_channel->channel.actual_len = ux500_channel->cur_len; @@ -84,7 +85,8 @@ static void ux500_rx_work(struct work_struct *data) struct musb *musb = hw_ep->musb; unsigned long flags; - DBG(4, "DMA rx transfer done on hw_ep=%d\n", hw_ep->epnum); + dev_dbg(musb->controller, "DMA rx transfer done on hw_ep=%d\n", + hw_ep->epnum); spin_lock_irqsave(&musb->lock, flags); ux500_channel->channel.actual_len = ux500_channel->cur_len; @@ -116,9 +118,11 @@ static bool ux500_configure_channel(struct dma_channel *channel, enum dma_slave_buswidth addr_width; dma_addr_t usb_fifo_addr = (MUSB_FIFO_OFFSET(hw_ep->epnum) + ux500_channel->controller->phy_base); + struct musb *musb = ux500_channel->controller->private_data; - DBG(4, "packet_sz=%d, mode=%d, dma_addr=0x%x, len=%d is_tx=%d\n", - packet_sz, mode, dma_addr, len, ux500_channel->is_tx); + dev_dbg(musb->controller, + "packet_sz=%d, mode=%d, dma_addr=0x%x, len=%d is_tx=%d\n", + packet_sz, mode, dma_addr, len, ux500_channel->is_tx); ux500_channel->cur_len = len; @@ -133,15 +137,13 @@ static bool ux500_configure_channel(struct dma_channel *channel, DMA_SLAVE_BUSWIDTH_4_BYTES; slave_conf.direction = direction; - if (direction == DMA_FROM_DEVICE) { - slave_conf.src_addr = usb_fifo_addr; - slave_conf.src_addr_width = addr_width; - slave_conf.src_maxburst = 16; - } else { - slave_conf.dst_addr = usb_fifo_addr; - slave_conf.dst_addr_width = addr_width; - slave_conf.dst_maxburst = 16; - } + slave_conf.src_addr = usb_fifo_addr; + slave_conf.src_addr_width = addr_width; + slave_conf.src_maxburst = 16; + slave_conf.dst_addr = usb_fifo_addr; + slave_conf.dst_addr_width = addr_width; + slave_conf.dst_maxburst = 16; + dma_chan->device->device_control(dma_chan, DMA_SLAVE_CONFIG, (unsigned long) &slave_conf); @@ -166,6 +168,7 @@ static struct dma_channel *ux500_dma_channel_allocate(struct dma_controller *c, struct ux500_dma_controller *controller = container_of(c, struct ux500_dma_controller, controller); struct ux500_dma_channel *ux500_channel = NULL; + struct musb *musb = controller->private_data; u8 ch_num = hw_ep->epnum - 1; u32 max_ch; @@ -192,7 +195,7 @@ static struct dma_channel *ux500_dma_channel_allocate(struct dma_controller *c, ux500_channel->hw_ep = hw_ep; ux500_channel->is_allocated = 1; - DBG(7, "hw_ep=%d, is_tx=0x%x, channel=%d\n", + dev_dbg(musb->controller, "hw_ep=%d, is_tx=0x%x, channel=%d\n", hw_ep->epnum, is_tx, ch_num); return &(ux500_channel->channel); @@ -201,8 +204,9 @@ static struct dma_channel *ux500_dma_channel_allocate(struct dma_controller *c, static void ux500_dma_channel_release(struct dma_channel *channel) { struct ux500_dma_channel *ux500_channel = channel->private_data; + struct musb *musb = ux500_channel->controller->private_data; - DBG(7, "channel=%d\n", ux500_channel->ch_num); + dev_dbg(musb->controller, "channel=%d\n", ux500_channel->ch_num); if (ux500_channel->is_allocated) { ux500_channel->is_allocated = 0; @@ -252,8 +256,8 @@ static int ux500_dma_channel_abort(struct dma_channel *channel) void __iomem *epio = musb->endpoints[ux500_channel->hw_ep->epnum].regs; u16 csr; - DBG(4, "channel=%d, is_tx=%d\n", ux500_channel->ch_num, - ux500_channel->is_tx); + dev_dbg(musb->controller, "channel=%d, is_tx=%d\n", + ux500_channel->ch_num, ux500_channel->is_tx); if (channel->status == MUSB_DMA_STATUS_BUSY) { if (ux500_channel->is_tx) { diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 78a2cf9551c..5fc13e71791 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -101,6 +101,7 @@ static int ftdi_jtag_probe(struct usb_serial *serial); static int ftdi_mtxorb_hack_setup(struct usb_serial *serial); static int ftdi_NDI_device_setup(struct usb_serial *serial); static int ftdi_stmclite_probe(struct usb_serial *serial); +static int ftdi_8u2232c_probe(struct usb_serial *serial); static void ftdi_USB_UIRT_setup(struct ftdi_private *priv); static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv); @@ -128,6 +129,10 @@ static struct ftdi_sio_quirk ftdi_stmclite_quirk = { .probe = ftdi_stmclite_probe, }; +static struct ftdi_sio_quirk ftdi_8u2232c_quirk = { + .probe = ftdi_8u2232c_probe, +}; + /* * The 8U232AM has the same API as the sio except for: * - it can support MUCH higher baudrates; up to: @@ -178,7 +183,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) }, { USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) }, { USB_DEVICE(FTDI_VID, FTDI_232RL_PID) }, - { USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) , + .driver_info = (kernel_ulong_t)&ftdi_8u2232c_quirk }, { USB_DEVICE(FTDI_VID, FTDI_4232H_PID) }, { USB_DEVICE(FTDI_VID, FTDI_232H_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) }, @@ -1737,6 +1743,18 @@ static int ftdi_jtag_probe(struct usb_serial *serial) return 0; } +static int ftdi_8u2232c_probe(struct usb_serial *serial) +{ + struct usb_device *udev = serial->dev; + + dbg("%s", __func__); + + if (strcmp(udev->manufacturer, "CALAO Systems") == 0) + return ftdi_jtag_probe(serial); + + return 0; +} + /* * First and second port on STMCLiteadaptors is reserved for JTAG interface * and the forth port for pio diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 81565619891..fe22e90bc87 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -148,6 +148,8 @@ static void option_instat_callback(struct urb *urb); #define HUAWEI_PRODUCT_K4505 0x1464 #define HUAWEI_PRODUCT_K3765 0x1465 #define HUAWEI_PRODUCT_E14AC 0x14AC +#define HUAWEI_PRODUCT_K3806 0x14AE +#define HUAWEI_PRODUCT_K4605 0x14C6 #define HUAWEI_PRODUCT_K3770 0x14C9 #define HUAWEI_PRODUCT_K3771 0x14CA #define HUAWEI_PRODUCT_K4510 0x14CB @@ -416,6 +418,56 @@ static void option_instat_callback(struct urb *urb); #define SAMSUNG_VENDOR_ID 0x04e8 #define SAMSUNG_PRODUCT_GT_B3730 0x6889 +/* YUGA products www.yuga-info.com*/ +#define YUGA_VENDOR_ID 0x257A +#define YUGA_PRODUCT_CEM600 0x1601 +#define YUGA_PRODUCT_CEM610 0x1602 +#define YUGA_PRODUCT_CEM500 0x1603 +#define YUGA_PRODUCT_CEM510 0x1604 +#define YUGA_PRODUCT_CEM800 0x1605 +#define YUGA_PRODUCT_CEM900 0x1606 + +#define YUGA_PRODUCT_CEU818 0x1607 +#define YUGA_PRODUCT_CEU816 0x1608 +#define YUGA_PRODUCT_CEU828 0x1609 +#define YUGA_PRODUCT_CEU826 0x160A +#define YUGA_PRODUCT_CEU518 0x160B +#define YUGA_PRODUCT_CEU516 0x160C +#define YUGA_PRODUCT_CEU528 0x160D +#define YUGA_PRODUCT_CEU526 0x160F + +#define YUGA_PRODUCT_CWM600 0x2601 +#define YUGA_PRODUCT_CWM610 0x2602 +#define YUGA_PRODUCT_CWM500 0x2603 +#define YUGA_PRODUCT_CWM510 0x2604 +#define YUGA_PRODUCT_CWM800 0x2605 +#define YUGA_PRODUCT_CWM900 0x2606 + +#define YUGA_PRODUCT_CWU718 0x2607 +#define YUGA_PRODUCT_CWU716 0x2608 +#define YUGA_PRODUCT_CWU728 0x2609 +#define YUGA_PRODUCT_CWU726 0x260A +#define YUGA_PRODUCT_CWU518 0x260B +#define YUGA_PRODUCT_CWU516 0x260C +#define YUGA_PRODUCT_CWU528 0x260D +#define YUGA_PRODUCT_CWU526 0x260F + +#define YUGA_PRODUCT_CLM600 0x2601 +#define YUGA_PRODUCT_CLM610 0x2602 +#define YUGA_PRODUCT_CLM500 0x2603 +#define YUGA_PRODUCT_CLM510 0x2604 +#define YUGA_PRODUCT_CLM800 0x2605 +#define YUGA_PRODUCT_CLM900 0x2606 + +#define YUGA_PRODUCT_CLU718 0x2607 +#define YUGA_PRODUCT_CLU716 0x2608 +#define YUGA_PRODUCT_CLU728 0x2609 +#define YUGA_PRODUCT_CLU726 0x260A +#define YUGA_PRODUCT_CLU518 0x260B +#define YUGA_PRODUCT_CLU516 0x260C +#define YUGA_PRODUCT_CLU528 0x260D +#define YUGA_PRODUCT_CLU526 0x260F + /* some devices interfaces need special handling due to a number of reasons */ enum option_blacklist_reason { OPTION_BLACKLIST_NONE = 0, @@ -551,6 +603,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ETS1220, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3806, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x31) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x32) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3771, 0xff, 0x02, 0x31) }, @@ -1005,6 +1059,48 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */ { USB_DEVICE(ONDA_VENDOR_ID, ONDA_MT825UP) }, /* ONDA MT825UP modem */ { USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730 LTE USB modem.*/ + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM600) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM610) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM500) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM510) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM800) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM900) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU818) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU816) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU828) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU826) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU518) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU516) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU528) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU526) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM600) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM610) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM500) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM510) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM800) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM900) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU718) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU716) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU728) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU726) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU518) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU516) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU528) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU526) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM600) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM610) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM500) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM510) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM800) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM900) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU718) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU716) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU728) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU726) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU518) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU516) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU528) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); @@ -1134,11 +1230,13 @@ static int option_probe(struct usb_serial *serial, serial->interface->cur_altsetting->desc.bInterfaceClass != 0xff) return -ENODEV; - /* Don't bind network interfaces on Huawei K3765 & K4505 */ + /* Don't bind network interfaces on Huawei K3765, K4505 & K4605 */ if (serial->dev->descriptor.idVendor == HUAWEI_VENDOR_ID && (serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K3765 || - serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K4505) && - serial->interface->cur_altsetting->desc.bInterfaceNumber == 1) + serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K4505 || + serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K4605) && + (serial->interface->cur_altsetting->desc.bInterfaceNumber == 1 || + serial->interface->cur_altsetting->desc.bInterfaceNumber == 2)) return -ENODEV; /* Don't bind network interface on Samsung GT-B3730, it is handled by a separate module */ diff --git a/drivers/video/backlight/adp8870_bl.c b/drivers/video/backlight/adp8870_bl.c index 05a8832bb3e..d06886a2bfb 100644 --- a/drivers/video/backlight/adp8870_bl.c +++ b/drivers/video/backlight/adp8870_bl.c @@ -1009,4 +1009,4 @@ module_exit(adp8870_exit); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); MODULE_DESCRIPTION("ADP8870 Backlight driver"); -MODULE_ALIAS("platform:adp8870-backlight"); +MODULE_ALIAS("i2c:adp8870-backlight"); diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c index 80d292fb92d..7363c1b169e 100644 --- a/drivers/video/backlight/backlight.c +++ b/drivers/video/backlight/backlight.c @@ -19,7 +19,7 @@ #include <asm/backlight.h> #endif -static const char const *backlight_types[] = { +static const char *const backlight_types[] = { [BACKLIGHT_RAW] = "raw", [BACKLIGHT_PLATFORM] = "platform", [BACKLIGHT_FIRMWARE] = "firmware", diff --git a/drivers/video/backlight/ep93xx_bl.c b/drivers/video/backlight/ep93xx_bl.c index 9f1e389d51d..b0582917f0c 100644 --- a/drivers/video/backlight/ep93xx_bl.c +++ b/drivers/video/backlight/ep93xx_bl.c @@ -11,7 +11,7 @@ * BRIGHT, on the Cirrus EP9307, EP9312, and EP9315 processors. */ - +#include <linux/module.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/fb.h> diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index b8f38ec6eb1..8b5b2a4124c 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -28,6 +28,8 @@ struct pwm_bl_data { unsigned int lth_brightness; int (*notify)(struct device *, int brightness); + void (*notify_after)(struct device *, + int brightness); int (*check_fb)(struct device *, struct fb_info *); }; @@ -55,6 +57,10 @@ static int pwm_backlight_update_status(struct backlight_device *bl) pwm_config(pb->pwm, brightness, pb->period); pwm_enable(pb->pwm); } + + if (pb->notify_after) + pb->notify_after(pb->dev, brightness); + return 0; } @@ -105,6 +111,7 @@ static int pwm_backlight_probe(struct platform_device *pdev) pb->period = data->pwm_period_ns; pb->notify = data->notify; + pb->notify_after = data->notify_after; pb->check_fb = data->check_fb; pb->lth_brightness = data->lth_brightness * (data->pwm_period_ns / data->max_brightness); @@ -172,6 +179,8 @@ static int pwm_backlight_suspend(struct platform_device *pdev, pb->notify(pb->dev, 0); pwm_config(pb->pwm, 0, pb->period); pwm_disable(pb->pwm); + if (pb->notify_after) + pb->notify_after(pb->dev, 0); return 0; } diff --git a/drivers/w1/masters/ds2490.c b/drivers/w1/masters/ds2490.c index 02bf7bf7160..b5abaae38e9 100644 --- a/drivers/w1/masters/ds2490.c +++ b/drivers/w1/masters/ds2490.c @@ -1,7 +1,7 @@ /* * dscore.c * - * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru> + * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net> * * * This program is free software; you can redistribute it and/or modify @@ -1024,5 +1024,5 @@ module_init(ds_init); module_exit(ds_fini); MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>"); +MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>"); MODULE_DESCRIPTION("DS2490 USB <-> W1 bus master driver (DS9490*)"); diff --git a/drivers/w1/masters/matrox_w1.c b/drivers/w1/masters/matrox_w1.c index 334d1ccf9c9..f667c26b219 100644 --- a/drivers/w1/masters/matrox_w1.c +++ b/drivers/w1/masters/matrox_w1.c @@ -1,7 +1,7 @@ /* * matrox_w1.c * - * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru> + * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net> * * * This program is free software; you can redistribute it and/or modify @@ -39,7 +39,7 @@ #include "../w1_log.h" MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>"); +MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>"); MODULE_DESCRIPTION("Driver for transport(Dallas 1-wire prtocol) over VGA DDC(matrox gpio)."); static struct pci_device_id matrox_w1_tbl[] = { diff --git a/drivers/w1/slaves/w1_ds2408.c b/drivers/w1/slaves/w1_ds2408.c index c37781899d9..7c8cdb8aed2 100644 --- a/drivers/w1/slaves/w1_ds2408.c +++ b/drivers/w1/slaves/w1_ds2408.c @@ -373,7 +373,7 @@ static int w1_f29_add_slave(struct w1_slave *sl) static void w1_f29_remove_slave(struct w1_slave *sl) { int i; - for (i = NB_SYSFS_BIN_FILES; i <= 0; --i) + for (i = NB_SYSFS_BIN_FILES - 1; i >= 0; --i) sysfs_remove_bin_file(&sl->dev.kobj, &(w1_f29_sysfs_bin_files[i])); } diff --git a/drivers/w1/slaves/w1_smem.c b/drivers/w1/slaves/w1_smem.c index cc8c02e9259..84655625c87 100644 --- a/drivers/w1/slaves/w1_smem.c +++ b/drivers/w1/slaves/w1_smem.c @@ -1,7 +1,7 @@ /* * w1_smem.c * - * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru> + * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net> * * * This program is free software; you can redistribute it and/or modify @@ -32,7 +32,7 @@ #include "../w1_family.h" MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>"); +MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>"); MODULE_DESCRIPTION("Driver for 1-wire Dallas network protocol, 64bit memory family."); static struct w1_family w1_smem_family_01 = { diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c index 402928b135d..a1ef9b5b38c 100644 --- a/drivers/w1/slaves/w1_therm.c +++ b/drivers/w1/slaves/w1_therm.c @@ -1,7 +1,7 @@ /* * w1_therm.c * - * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru> + * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net> * * * This program is free software; you can redistribute it and/or modify @@ -34,7 +34,7 @@ #include "../w1_family.h" MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>"); +MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>"); MODULE_DESCRIPTION("Driver for 1-wire Dallas network protocol, temperature family."); /* Allow the strong pullup to be disabled, but default to enabled. diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c index 6c136c19e98..c3749782385 100644 --- a/drivers/w1/w1.c +++ b/drivers/w1/w1.c @@ -1,7 +1,7 @@ /* * w1.c * - * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru> + * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net> * * * This program is free software; you can redistribute it and/or modify @@ -42,7 +42,7 @@ #include "w1_netlink.h" MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>"); +MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>"); MODULE_DESCRIPTION("Driver for 1-wire Dallas network protocol."); static int w1_timeout = 10; diff --git a/drivers/w1/w1.h b/drivers/w1/w1.h index 1ce23fc6186..4d012ca3f32 100644 --- a/drivers/w1/w1.h +++ b/drivers/w1/w1.h @@ -1,7 +1,7 @@ /* * w1.h * - * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru> + * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net> * * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/w1/w1_family.c b/drivers/w1/w1_family.c index 4a099041f28..63359797c8b 100644 --- a/drivers/w1/w1_family.c +++ b/drivers/w1/w1_family.c @@ -1,7 +1,7 @@ /* * w1_family.c * - * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru> + * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net> * * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/w1/w1_family.h b/drivers/w1/w1_family.h index 98a1ac0f469..490cda2281b 100644 --- a/drivers/w1/w1_family.h +++ b/drivers/w1/w1_family.h @@ -1,7 +1,7 @@ /* * w1_family.h * - * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru> + * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net> * * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/w1/w1_int.c b/drivers/w1/w1_int.c index b50be3f1073..d220bce2cee 100644 --- a/drivers/w1/w1_int.c +++ b/drivers/w1/w1_int.c @@ -1,7 +1,7 @@ /* * w1_int.c * - * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru> + * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net> * * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/w1/w1_int.h b/drivers/w1/w1_int.h index 4274082d226..2ad7d4414be 100644 --- a/drivers/w1/w1_int.h +++ b/drivers/w1/w1_int.h @@ -1,7 +1,7 @@ /* * w1_int.h * - * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru> + * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net> * * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c index 8e8b64cfafb..765b37b62a4 100644 --- a/drivers/w1/w1_io.c +++ b/drivers/w1/w1_io.c @@ -1,7 +1,7 @@ /* * w1_io.c * - * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru> + * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net> * * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/w1/w1_log.h b/drivers/w1/w1_log.h index e6ab7cf08f8..9c7bd62e6bd 100644 --- a/drivers/w1/w1_log.h +++ b/drivers/w1/w1_log.h @@ -1,7 +1,7 @@ /* * w1_log.h * - * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru> + * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net> * * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/w1/w1_netlink.c b/drivers/w1/w1_netlink.c index 55aabd927c6..40788c925d1 100644 --- a/drivers/w1/w1_netlink.c +++ b/drivers/w1/w1_netlink.c @@ -1,7 +1,7 @@ /* * w1_netlink.c * - * Copyright (c) 2003 Evgeniy Polyakov <johnpol@2ka.mipt.ru> + * Copyright (c) 2003 Evgeniy Polyakov <zbr@ioremap.net> * * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/w1/w1_netlink.h b/drivers/w1/w1_netlink.h index 27e950f935b..b0922dc2965 100644 --- a/drivers/w1/w1_netlink.h +++ b/drivers/w1/w1_netlink.h @@ -1,7 +1,7 @@ /* * w1_netlink.h * - * Copyright (c) 2003 Evgeniy Polyakov <johnpol@2ka.mipt.ru> + * Copyright (c) 2003 Evgeniy Polyakov <zbr@ioremap.net> * * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index 410fba45378..809cbda03d7 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -494,15 +494,16 @@ static int hpwdt_pretimeout(struct notifier_block *nb, unsigned long ulReason, asminline_call(&cmn_regs, cru_rom_addr); die_nmi_called = 1; spin_unlock_irqrestore(&rom_lock, rom_pl); + + if (allow_kdump) + hpwdt_stop(); + if (!is_icru) { if (cmn_regs.u1.ral == 0) { - printk(KERN_WARNING "hpwdt: An NMI occurred, " + panic("An NMI occurred, " "but unable to determine source.\n"); } } - - if (allow_kdump) - hpwdt_stop(); panic("An NMI occurred, please see the Integrated " "Management Log for details.\n"); diff --git a/drivers/watchdog/lantiq_wdt.c b/drivers/watchdog/lantiq_wdt.c index 7d82adac1cb..102aed0efbf 100644 --- a/drivers/watchdog/lantiq_wdt.c +++ b/drivers/watchdog/lantiq_wdt.c @@ -51,16 +51,16 @@ static int ltq_wdt_ok_to_close; static void ltq_wdt_enable(void) { - ltq_wdt_timeout = ltq_wdt_timeout * + unsigned long int timeout = ltq_wdt_timeout * (ltq_io_region_clk_rate / LTQ_WDT_DIVIDER) + 0x1000; - if (ltq_wdt_timeout > LTQ_MAX_TIMEOUT) - ltq_wdt_timeout = LTQ_MAX_TIMEOUT; + if (timeout > LTQ_MAX_TIMEOUT) + timeout = LTQ_MAX_TIMEOUT; /* write the first password magic */ ltq_w32(LTQ_WDT_PW1, ltq_wdt_membase + LTQ_WDT_CR); /* write the second magic plus the configuration and new timeout */ ltq_w32(LTQ_WDT_SR_EN | LTQ_WDT_SR_PWD | LTQ_WDT_SR_CLKDIV | - LTQ_WDT_PW2 | ltq_wdt_timeout, ltq_wdt_membase + LTQ_WDT_CR); + LTQ_WDT_PW2 | timeout, ltq_wdt_membase + LTQ_WDT_CR); } static void diff --git a/drivers/watchdog/sbc_epx_c3.c b/drivers/watchdog/sbc_epx_c3.c index 3066a5127ca..eaca366b723 100644 --- a/drivers/watchdog/sbc_epx_c3.c +++ b/drivers/watchdog/sbc_epx_c3.c @@ -173,7 +173,7 @@ static struct notifier_block epx_c3_notifier = { .notifier_call = epx_c3_notify_sys, }; -static const char banner[] __initdata = KERN_INFO PFX +static const char banner[] __initconst = KERN_INFO PFX "Hardware Watchdog Timer for Winsystems EPX-C3 SBC: 0.1\n"; static int __init watchdog_init(void) diff --git a/drivers/watchdog/watchdog_dev.c b/drivers/watchdog/watchdog_dev.c index d33520d0b4c..1199da0f98c 100644 --- a/drivers/watchdog/watchdog_dev.c +++ b/drivers/watchdog/watchdog_dev.c @@ -59,7 +59,7 @@ static struct watchdog_device *wdd; static int watchdog_ping(struct watchdog_device *wddev) { - if (test_bit(WDOG_ACTIVE, &wdd->status)) { + if (test_bit(WDOG_ACTIVE, &wddev->status)) { if (wddev->ops->ping) return wddev->ops->ping(wddev); /* ping the watchdog */ else @@ -81,12 +81,12 @@ static int watchdog_start(struct watchdog_device *wddev) { int err; - if (!test_bit(WDOG_ACTIVE, &wdd->status)) { + if (!test_bit(WDOG_ACTIVE, &wddev->status)) { err = wddev->ops->start(wddev); if (err < 0) return err; - set_bit(WDOG_ACTIVE, &wdd->status); + set_bit(WDOG_ACTIVE, &wddev->status); } return 0; } @@ -105,18 +105,18 @@ static int watchdog_stop(struct watchdog_device *wddev) { int err = -EBUSY; - if (test_bit(WDOG_NO_WAY_OUT, &wdd->status)) { + if (test_bit(WDOG_NO_WAY_OUT, &wddev->status)) { pr_info("%s: nowayout prevents watchdog to be stopped!\n", - wdd->info->identity); + wddev->info->identity); return err; } - if (test_bit(WDOG_ACTIVE, &wdd->status)) { + if (test_bit(WDOG_ACTIVE, &wddev->status)) { err = wddev->ops->stop(wddev); if (err < 0) return err; - clear_bit(WDOG_ACTIVE, &wdd->status); + clear_bit(WDOG_ACTIVE, &wddev->status); } return 0; } diff --git a/drivers/xen/events.c b/drivers/xen/events.c index da70f5c32eb..7523719bf8a 100644 --- a/drivers/xen/events.c +++ b/drivers/xen/events.c @@ -54,7 +54,7 @@ * This lock protects updates to the following mapping and reference-count * arrays. The lock does not need to be acquired to read the mapping tables. */ -static DEFINE_SPINLOCK(irq_mapping_update_lock); +static DEFINE_MUTEX(irq_mapping_update_lock); static LIST_HEAD(xen_irq_list_head); @@ -631,7 +631,7 @@ int xen_bind_pirq_gsi_to_irq(unsigned gsi, int irq = -1; struct physdev_irq irq_op; - spin_lock(&irq_mapping_update_lock); + mutex_lock(&irq_mapping_update_lock); irq = find_irq_by_gsi(gsi); if (irq != -1) { @@ -684,7 +684,7 @@ int xen_bind_pirq_gsi_to_irq(unsigned gsi, handle_edge_irq, name); out: - spin_unlock(&irq_mapping_update_lock); + mutex_unlock(&irq_mapping_update_lock); return irq; } @@ -710,7 +710,7 @@ int xen_bind_pirq_msi_to_irq(struct pci_dev *dev, struct msi_desc *msidesc, { int irq, ret; - spin_lock(&irq_mapping_update_lock); + mutex_lock(&irq_mapping_update_lock); irq = xen_allocate_irq_dynamic(); if (irq == -1) @@ -724,10 +724,10 @@ int xen_bind_pirq_msi_to_irq(struct pci_dev *dev, struct msi_desc *msidesc, if (ret < 0) goto error_irq; out: - spin_unlock(&irq_mapping_update_lock); + mutex_unlock(&irq_mapping_update_lock); return irq; error_irq: - spin_unlock(&irq_mapping_update_lock); + mutex_unlock(&irq_mapping_update_lock); xen_free_irq(irq); return -1; } @@ -740,7 +740,7 @@ int xen_destroy_irq(int irq) struct irq_info *info = info_for_irq(irq); int rc = -ENOENT; - spin_lock(&irq_mapping_update_lock); + mutex_lock(&irq_mapping_update_lock); desc = irq_to_desc(irq); if (!desc) @@ -766,7 +766,7 @@ int xen_destroy_irq(int irq) xen_free_irq(irq); out: - spin_unlock(&irq_mapping_update_lock); + mutex_unlock(&irq_mapping_update_lock); return rc; } @@ -776,7 +776,7 @@ int xen_irq_from_pirq(unsigned pirq) struct irq_info *info; - spin_lock(&irq_mapping_update_lock); + mutex_lock(&irq_mapping_update_lock); list_for_each_entry(info, &xen_irq_list_head, list) { if (info == NULL || info->type != IRQT_PIRQ) @@ -787,7 +787,7 @@ int xen_irq_from_pirq(unsigned pirq) } irq = -1; out: - spin_unlock(&irq_mapping_update_lock); + mutex_unlock(&irq_mapping_update_lock); return irq; } @@ -802,7 +802,7 @@ int bind_evtchn_to_irq(unsigned int evtchn) { int irq; - spin_lock(&irq_mapping_update_lock); + mutex_lock(&irq_mapping_update_lock); irq = evtchn_to_irq[evtchn]; @@ -818,7 +818,7 @@ int bind_evtchn_to_irq(unsigned int evtchn) } out: - spin_unlock(&irq_mapping_update_lock); + mutex_unlock(&irq_mapping_update_lock); return irq; } @@ -829,7 +829,7 @@ static int bind_ipi_to_irq(unsigned int ipi, unsigned int cpu) struct evtchn_bind_ipi bind_ipi; int evtchn, irq; - spin_lock(&irq_mapping_update_lock); + mutex_lock(&irq_mapping_update_lock); irq = per_cpu(ipi_to_irq, cpu)[ipi]; @@ -853,7 +853,7 @@ static int bind_ipi_to_irq(unsigned int ipi, unsigned int cpu) } out: - spin_unlock(&irq_mapping_update_lock); + mutex_unlock(&irq_mapping_update_lock); return irq; } @@ -878,7 +878,7 @@ int bind_virq_to_irq(unsigned int virq, unsigned int cpu) struct evtchn_bind_virq bind_virq; int evtchn, irq; - spin_lock(&irq_mapping_update_lock); + mutex_lock(&irq_mapping_update_lock); irq = per_cpu(virq_to_irq, cpu)[virq]; @@ -903,7 +903,7 @@ int bind_virq_to_irq(unsigned int virq, unsigned int cpu) } out: - spin_unlock(&irq_mapping_update_lock); + mutex_unlock(&irq_mapping_update_lock); return irq; } @@ -913,7 +913,7 @@ static void unbind_from_irq(unsigned int irq) struct evtchn_close close; int evtchn = evtchn_from_irq(irq); - spin_lock(&irq_mapping_update_lock); + mutex_lock(&irq_mapping_update_lock); if (VALID_EVTCHN(evtchn)) { close.port = evtchn; @@ -943,7 +943,7 @@ static void unbind_from_irq(unsigned int irq) xen_free_irq(irq); - spin_unlock(&irq_mapping_update_lock); + mutex_unlock(&irq_mapping_update_lock); } int bind_evtchn_to_irqhandler(unsigned int evtchn, @@ -1279,7 +1279,7 @@ void rebind_evtchn_irq(int evtchn, int irq) will also be masked. */ disable_irq(irq); - spin_lock(&irq_mapping_update_lock); + mutex_lock(&irq_mapping_update_lock); /* After resume the irq<->evtchn mappings are all cleared out */ BUG_ON(evtchn_to_irq[evtchn] != -1); @@ -1289,7 +1289,7 @@ void rebind_evtchn_irq(int evtchn, int irq) xen_irq_info_evtchn_init(irq, evtchn); - spin_unlock(&irq_mapping_update_lock); + mutex_unlock(&irq_mapping_update_lock); /* new event channels are always bound to cpu 0 */ irq_set_affinity(irq, cpumask_of(0)); diff --git a/drivers/zorro/zorro.c b/drivers/zorro/zorro.c index e0c2807b097..181fa8158a8 100644 --- a/drivers/zorro/zorro.c +++ b/drivers/zorro/zorro.c @@ -148,10 +148,10 @@ static int __init amiga_zorro_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, bus); - /* Register all devices */ pr_info("Zorro: Probing AutoConfig expansion devices: %u device%s\n", zorro_num_autocon, zorro_num_autocon == 1 ? "" : "s"); + /* First identify all devices ... */ for (i = 0; i < zorro_num_autocon; i++) { z = &zorro_autocon[i]; z->id = (z->rom.er_Manufacturer<<16) | (z->rom.er_Product<<8); @@ -172,6 +172,11 @@ static int __init amiga_zorro_probe(struct platform_device *pdev) dev_set_name(&z->dev, "%02x", i); z->dev.parent = &bus->dev; z->dev.bus = &zorro_bus_type; + } + + /* ... then register them */ + for (i = 0; i < zorro_num_autocon; i++) { + z = &zorro_autocon[i]; error = device_register(&z->dev); if (error) { dev_err(&bus->dev, "Error registering device %s\n", diff --git a/fs/9p/v9fs_vfs.h b/fs/9p/v9fs_vfs.h index 46ce357ca1a..410ffd6ceb5 100644 --- a/fs/9p/v9fs_vfs.h +++ b/fs/9p/v9fs_vfs.h @@ -54,9 +54,9 @@ extern struct kmem_cache *v9fs_inode_cache; struct inode *v9fs_alloc_inode(struct super_block *sb); void v9fs_destroy_inode(struct inode *inode); -struct inode *v9fs_get_inode(struct super_block *sb, int mode); +struct inode *v9fs_get_inode(struct super_block *sb, int mode, dev_t); int v9fs_init_inode(struct v9fs_session_info *v9ses, - struct inode *inode, int mode); + struct inode *inode, int mode, dev_t); void v9fs_evict_inode(struct inode *inode); ino_t v9fs_qid2ino(struct p9_qid *qid); void v9fs_stat2inode(struct p9_wstat *, struct inode *, struct super_block *); @@ -83,4 +83,6 @@ static inline void v9fs_invalidate_inode_attr(struct inode *inode) v9inode->cache_validity |= V9FS_INO_INVALID_ATTR; return; } + +int v9fs_open_to_dotl_flags(int flags); #endif diff --git a/fs/9p/vfs_file.c b/fs/9p/vfs_file.c index 3c173fcc2c5..62857a810a7 100644 --- a/fs/9p/vfs_file.c +++ b/fs/9p/vfs_file.c @@ -65,7 +65,7 @@ int v9fs_file_open(struct inode *inode, struct file *file) v9inode = V9FS_I(inode); v9ses = v9fs_inode2v9ses(inode); if (v9fs_proto_dotl(v9ses)) - omode = file->f_flags; + omode = v9fs_open_to_dotl_flags(file->f_flags); else omode = v9fs_uflags2omode(file->f_flags, v9fs_proto_dotu(v9ses)); @@ -169,7 +169,18 @@ static int v9fs_file_do_lock(struct file *filp, int cmd, struct file_lock *fl) /* convert posix lock to p9 tlock args */ memset(&flock, 0, sizeof(flock)); - flock.type = fl->fl_type; + /* map the lock type */ + switch (fl->fl_type) { + case F_RDLCK: + flock.type = P9_LOCK_TYPE_RDLCK; + break; + case F_WRLCK: + flock.type = P9_LOCK_TYPE_WRLCK; + break; + case F_UNLCK: + flock.type = P9_LOCK_TYPE_UNLCK; + break; + } flock.start = fl->fl_start; if (fl->fl_end == OFFSET_MAX) flock.length = 0; @@ -245,7 +256,7 @@ static int v9fs_file_getlock(struct file *filp, struct file_lock *fl) /* convert posix lock to p9 tgetlock args */ memset(&glock, 0, sizeof(glock)); - glock.type = fl->fl_type; + glock.type = P9_LOCK_TYPE_UNLCK; glock.start = fl->fl_start; if (fl->fl_end == OFFSET_MAX) glock.length = 0; @@ -257,17 +268,26 @@ static int v9fs_file_getlock(struct file *filp, struct file_lock *fl) res = p9_client_getlock_dotl(fid, &glock); if (res < 0) return res; - if (glock.type != F_UNLCK) { - fl->fl_type = glock.type; + /* map 9p lock type to os lock type */ + switch (glock.type) { + case P9_LOCK_TYPE_RDLCK: + fl->fl_type = F_RDLCK; + break; + case P9_LOCK_TYPE_WRLCK: + fl->fl_type = F_WRLCK; + break; + case P9_LOCK_TYPE_UNLCK: + fl->fl_type = F_UNLCK; + break; + } + if (glock.type != P9_LOCK_TYPE_UNLCK) { fl->fl_start = glock.start; if (glock.length == 0) fl->fl_end = OFFSET_MAX; else fl->fl_end = glock.start + glock.length - 1; fl->fl_pid = glock.proc_id; - } else - fl->fl_type = F_UNLCK; - + } return res; } diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c index 8bb5507e822..e3c03db3c78 100644 --- a/fs/9p/vfs_inode.c +++ b/fs/9p/vfs_inode.c @@ -95,15 +95,18 @@ static int unixmode2p9mode(struct v9fs_session_info *v9ses, int mode) /** * p9mode2unixmode- convert plan9 mode bits to unix mode bits * @v9ses: v9fs session information - * @mode: mode to convert + * @stat: p9_wstat from which mode need to be derived + * @rdev: major number, minor number in case of device files. * */ - -static int p9mode2unixmode(struct v9fs_session_info *v9ses, int mode) +static int p9mode2unixmode(struct v9fs_session_info *v9ses, + struct p9_wstat *stat, dev_t *rdev) { int res; + int mode = stat->mode; - res = mode & 0777; + res = mode & S_IALLUGO; + *rdev = 0; if ((mode & P9_DMDIR) == P9_DMDIR) res |= S_IFDIR; @@ -116,9 +119,26 @@ static int p9mode2unixmode(struct v9fs_session_info *v9ses, int mode) && (v9ses->nodev == 0)) res |= S_IFIFO; else if ((mode & P9_DMDEVICE) && (v9fs_proto_dotu(v9ses)) - && (v9ses->nodev == 0)) - res |= S_IFBLK; - else + && (v9ses->nodev == 0)) { + char type = 0, ext[32]; + int major = -1, minor = -1; + + strncpy(ext, stat->extension, sizeof(ext)); + sscanf(ext, "%c %u %u", &type, &major, &minor); + switch (type) { + case 'c': + res |= S_IFCHR; + break; + case 'b': + res |= S_IFBLK; + break; + default: + P9_DPRINTK(P9_DEBUG_ERROR, + "Unknown special type %c %s\n", type, + stat->extension); + }; + *rdev = MKDEV(major, minor); + } else res |= S_IFREG; if (v9fs_proto_dotu(v9ses)) { @@ -131,7 +151,6 @@ static int p9mode2unixmode(struct v9fs_session_info *v9ses, int mode) if ((mode & P9_DMSETVTX) == P9_DMSETVTX) res |= S_ISVTX; } - return res; } @@ -242,13 +261,13 @@ void v9fs_destroy_inode(struct inode *inode) } int v9fs_init_inode(struct v9fs_session_info *v9ses, - struct inode *inode, int mode) + struct inode *inode, int mode, dev_t rdev) { int err = 0; inode_init_owner(inode, NULL, mode); inode->i_blocks = 0; - inode->i_rdev = 0; + inode->i_rdev = rdev; inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME; inode->i_mapping->a_ops = &v9fs_addr_operations; @@ -335,7 +354,7 @@ error: * */ -struct inode *v9fs_get_inode(struct super_block *sb, int mode) +struct inode *v9fs_get_inode(struct super_block *sb, int mode, dev_t rdev) { int err; struct inode *inode; @@ -348,7 +367,7 @@ struct inode *v9fs_get_inode(struct super_block *sb, int mode) P9_EPRINTK(KERN_WARNING, "Problem allocating inode\n"); return ERR_PTR(-ENOMEM); } - err = v9fs_init_inode(v9ses, inode, mode); + err = v9fs_init_inode(v9ses, inode, mode, rdev); if (err) { iput(inode); return ERR_PTR(err); @@ -435,11 +454,12 @@ void v9fs_evict_inode(struct inode *inode) static int v9fs_test_inode(struct inode *inode, void *data) { int umode; + dev_t rdev; struct v9fs_inode *v9inode = V9FS_I(inode); struct p9_wstat *st = (struct p9_wstat *)data; struct v9fs_session_info *v9ses = v9fs_inode2v9ses(inode); - umode = p9mode2unixmode(v9ses, st->mode); + umode = p9mode2unixmode(v9ses, st, &rdev); /* don't match inode of different type */ if ((inode->i_mode & S_IFMT) != (umode & S_IFMT)) return 0; @@ -473,6 +493,7 @@ static struct inode *v9fs_qid_iget(struct super_block *sb, struct p9_wstat *st, int new) { + dev_t rdev; int retval, umode; unsigned long i_ino; struct inode *inode; @@ -496,8 +517,8 @@ static struct inode *v9fs_qid_iget(struct super_block *sb, * later. */ inode->i_ino = i_ino; - umode = p9mode2unixmode(v9ses, st->mode); - retval = v9fs_init_inode(v9ses, inode, umode); + umode = p9mode2unixmode(v9ses, st, &rdev); + retval = v9fs_init_inode(v9ses, inode, umode, rdev); if (retval) goto error; @@ -532,6 +553,19 @@ v9fs_inode_from_fid(struct v9fs_session_info *v9ses, struct p9_fid *fid, } /** + * v9fs_at_to_dotl_flags- convert Linux specific AT flags to + * plan 9 AT flag. + * @flags: flags to convert + */ +static int v9fs_at_to_dotl_flags(int flags) +{ + int rflags = 0; + if (flags & AT_REMOVEDIR) + rflags |= P9_DOTL_AT_REMOVEDIR; + return rflags; +} + +/** * v9fs_remove - helper function to remove files and directories * @dir: directory inode that is being deleted * @dentry: dentry that is being deleted @@ -558,7 +592,8 @@ static int v9fs_remove(struct inode *dir, struct dentry *dentry, int flags) return retval; } if (v9fs_proto_dotl(v9ses)) - retval = p9_client_unlinkat(dfid, dentry->d_name.name, flags); + retval = p9_client_unlinkat(dfid, dentry->d_name.name, + v9fs_at_to_dotl_flags(flags)); if (retval == -EOPNOTSUPP) { /* Try the one based on path */ v9fid = v9fs_fid_clone(dentry); @@ -645,13 +680,11 @@ v9fs_create(struct v9fs_session_info *v9ses, struct inode *dir, P9_DPRINTK(P9_DEBUG_VFS, "inode creation failed %d\n", err); goto error; } - d_instantiate(dentry, inode); err = v9fs_fid_add(dentry, fid); if (err < 0) goto error; - + d_instantiate(dentry, inode); return ofid; - error: if (ofid) p9_client_clunk(ofid); @@ -792,6 +825,7 @@ static int v9fs_vfs_mkdir(struct inode *dir, struct dentry *dentry, int mode) struct dentry *v9fs_vfs_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nameidata) { + struct dentry *res; struct super_block *sb; struct v9fs_session_info *v9ses; struct p9_fid *dfid, *fid; @@ -823,22 +857,35 @@ struct dentry *v9fs_vfs_lookup(struct inode *dir, struct dentry *dentry, return ERR_PTR(result); } - - inode = v9fs_get_inode_from_fid(v9ses, fid, dir->i_sb); + /* + * Make sure we don't use a wrong inode due to parallel + * unlink. For cached mode create calls request for new + * inode. But with cache disabled, lookup should do this. + */ + if (v9ses->cache) + inode = v9fs_get_inode_from_fid(v9ses, fid, dir->i_sb); + else + inode = v9fs_get_new_inode_from_fid(v9ses, fid, dir->i_sb); if (IS_ERR(inode)) { result = PTR_ERR(inode); inode = NULL; goto error; } - result = v9fs_fid_add(dentry, fid); if (result < 0) goto error_iput; - inst_out: - d_add(dentry, inode); - return NULL; - + /* + * If we had a rename on the server and a parallel lookup + * for the new name, then make sure we instantiate with + * the new name. ie look up for a/b, while on server somebody + * moved b under k and client parallely did a lookup for + * k/b. + */ + res = d_materialise_unique(dentry, inode); + if (!IS_ERR(res)) + return res; + result = PTR_ERR(res); error_iput: iput(inode); error: @@ -1002,7 +1049,7 @@ v9fs_vfs_getattr(struct vfsmount *mnt, struct dentry *dentry, return PTR_ERR(st); v9fs_stat2inode(st, dentry->d_inode, dentry->d_inode->i_sb); - generic_fillattr(dentry->d_inode, stat); + generic_fillattr(dentry->d_inode, stat); p9stat_free(st); kfree(st); @@ -1086,6 +1133,7 @@ void v9fs_stat2inode(struct p9_wstat *stat, struct inode *inode, struct super_block *sb) { + mode_t mode; char ext[32]; char tag_name[14]; unsigned int i_nlink; @@ -1121,31 +1169,9 @@ v9fs_stat2inode(struct p9_wstat *stat, struct inode *inode, inode->i_nlink = i_nlink; } } - inode->i_mode = p9mode2unixmode(v9ses, stat->mode); - if ((S_ISBLK(inode->i_mode)) || (S_ISCHR(inode->i_mode))) { - char type = 0; - int major = -1; - int minor = -1; - - strncpy(ext, stat->extension, sizeof(ext)); - sscanf(ext, "%c %u %u", &type, &major, &minor); - switch (type) { - case 'c': - inode->i_mode &= ~S_IFBLK; - inode->i_mode |= S_IFCHR; - break; - case 'b': - break; - default: - P9_DPRINTK(P9_DEBUG_ERROR, - "Unknown special type %c %s\n", type, - stat->extension); - }; - inode->i_rdev = MKDEV(major, minor); - init_special_inode(inode, inode->i_mode, inode->i_rdev); - } else - inode->i_rdev = 0; - + mode = stat->mode & S_IALLUGO; + mode |= inode->i_mode & ~S_IALLUGO; + inode->i_mode = mode; i_size_write(inode, stat->length); /* not real number of blocks, but 512 byte ones ... */ @@ -1411,6 +1437,8 @@ v9fs_vfs_mknod(struct inode *dir, struct dentry *dentry, int mode, dev_t rdev) int v9fs_refresh_inode(struct p9_fid *fid, struct inode *inode) { + int umode; + dev_t rdev; loff_t i_size; struct p9_wstat *st; struct v9fs_session_info *v9ses; @@ -1419,6 +1447,12 @@ int v9fs_refresh_inode(struct p9_fid *fid, struct inode *inode) st = p9_client_stat(fid); if (IS_ERR(st)) return PTR_ERR(st); + /* + * Don't update inode if the file type is different + */ + umode = p9mode2unixmode(v9ses, st, &rdev); + if ((inode->i_mode & S_IFMT) != (umode & S_IFMT)) + goto out; spin_lock(&inode->i_lock); /* @@ -1430,6 +1464,7 @@ int v9fs_refresh_inode(struct p9_fid *fid, struct inode *inode) if (v9ses->cache) inode->i_size = i_size; spin_unlock(&inode->i_lock); +out: p9stat_free(st); kfree(st); return 0; diff --git a/fs/9p/vfs_inode_dotl.c b/fs/9p/vfs_inode_dotl.c index b6c8ed20519..aded79fcd5c 100644 --- a/fs/9p/vfs_inode_dotl.c +++ b/fs/9p/vfs_inode_dotl.c @@ -153,7 +153,8 @@ static struct inode *v9fs_qid_iget_dotl(struct super_block *sb, * later. */ inode->i_ino = i_ino; - retval = v9fs_init_inode(v9ses, inode, st->st_mode); + retval = v9fs_init_inode(v9ses, inode, + st->st_mode, new_decode_dev(st->st_rdev)); if (retval) goto error; @@ -190,6 +191,58 @@ v9fs_inode_from_fid_dotl(struct v9fs_session_info *v9ses, struct p9_fid *fid, return inode; } +struct dotl_openflag_map { + int open_flag; + int dotl_flag; +}; + +static int v9fs_mapped_dotl_flags(int flags) +{ + int i; + int rflags = 0; + struct dotl_openflag_map dotl_oflag_map[] = { + { O_CREAT, P9_DOTL_CREATE }, + { O_EXCL, P9_DOTL_EXCL }, + { O_NOCTTY, P9_DOTL_NOCTTY }, + { O_TRUNC, P9_DOTL_TRUNC }, + { O_APPEND, P9_DOTL_APPEND }, + { O_NONBLOCK, P9_DOTL_NONBLOCK }, + { O_DSYNC, P9_DOTL_DSYNC }, + { FASYNC, P9_DOTL_FASYNC }, + { O_DIRECT, P9_DOTL_DIRECT }, + { O_LARGEFILE, P9_DOTL_LARGEFILE }, + { O_DIRECTORY, P9_DOTL_DIRECTORY }, + { O_NOFOLLOW, P9_DOTL_NOFOLLOW }, + { O_NOATIME, P9_DOTL_NOATIME }, + { O_CLOEXEC, P9_DOTL_CLOEXEC }, + { O_SYNC, P9_DOTL_SYNC}, + }; + for (i = 0; i < ARRAY_SIZE(dotl_oflag_map); i++) { + if (flags & dotl_oflag_map[i].open_flag) + rflags |= dotl_oflag_map[i].dotl_flag; + } + return rflags; +} + +/** + * v9fs_open_to_dotl_flags- convert Linux specific open flags to + * plan 9 open flag. + * @flags: flags to convert + */ +int v9fs_open_to_dotl_flags(int flags) +{ + int rflags = 0; + + /* + * We have same bits for P9_DOTL_READONLY, P9_DOTL_WRONLY + * and P9_DOTL_NOACCESS + */ + rflags |= flags & O_ACCMODE; + rflags |= v9fs_mapped_dotl_flags(flags); + + return rflags; +} + /** * v9fs_vfs_create_dotl - VFS hook to create files for 9P2000.L protocol. * @dir: directory inode that is being created @@ -258,7 +311,8 @@ v9fs_vfs_create_dotl(struct inode *dir, struct dentry *dentry, int omode, "Failed to get acl values in creat %d\n", err); goto error; } - err = p9_client_create_dotl(ofid, name, flags, mode, gid, &qid); + err = p9_client_create_dotl(ofid, name, v9fs_open_to_dotl_flags(flags), + mode, gid, &qid); if (err < 0) { P9_DPRINTK(P9_DEBUG_VFS, "p9_client_open_dotl failed in creat %d\n", @@ -281,10 +335,10 @@ v9fs_vfs_create_dotl(struct inode *dir, struct dentry *dentry, int omode, P9_DPRINTK(P9_DEBUG_VFS, "inode creation failed %d\n", err); goto error; } - d_instantiate(dentry, inode); err = v9fs_fid_add(dentry, fid); if (err < 0) goto error; + d_instantiate(dentry, inode); /* Now set the ACL based on the default value */ v9fs_set_create_acl(dentry, &dacl, &pacl); @@ -403,10 +457,10 @@ static int v9fs_vfs_mkdir_dotl(struct inode *dir, err); goto error; } - d_instantiate(dentry, inode); err = v9fs_fid_add(dentry, fid); if (err < 0) goto error; + d_instantiate(dentry, inode); fid = NULL; } else { /* @@ -414,7 +468,7 @@ static int v9fs_vfs_mkdir_dotl(struct inode *dir, * inode with stat. We need to get an inode * so that we can set the acl with dentry */ - inode = v9fs_get_inode(dir->i_sb, mode); + inode = v9fs_get_inode(dir->i_sb, mode, 0); if (IS_ERR(inode)) { err = PTR_ERR(inode); goto error; @@ -540,6 +594,7 @@ int v9fs_vfs_setattr_dotl(struct dentry *dentry, struct iattr *iattr) void v9fs_stat2inode_dotl(struct p9_stat_dotl *stat, struct inode *inode) { + mode_t mode; struct v9fs_inode *v9inode = V9FS_I(inode); if ((stat->st_result_mask & P9_STATS_BASIC) == P9_STATS_BASIC) { @@ -552,11 +607,10 @@ v9fs_stat2inode_dotl(struct p9_stat_dotl *stat, struct inode *inode) inode->i_uid = stat->st_uid; inode->i_gid = stat->st_gid; inode->i_nlink = stat->st_nlink; - inode->i_mode = stat->st_mode; - inode->i_rdev = new_decode_dev(stat->st_rdev); - if ((S_ISBLK(inode->i_mode)) || (S_ISCHR(inode->i_mode))) - init_special_inode(inode, inode->i_mode, inode->i_rdev); + mode = stat->st_mode & S_IALLUGO; + mode |= inode->i_mode & ~S_IALLUGO; + inode->i_mode = mode; i_size_write(inode, stat->st_size); inode->i_blocks = stat->st_blocks; @@ -657,14 +711,14 @@ v9fs_vfs_symlink_dotl(struct inode *dir, struct dentry *dentry, err); goto error; } - d_instantiate(dentry, inode); err = v9fs_fid_add(dentry, fid); if (err < 0) goto error; + d_instantiate(dentry, inode); fid = NULL; } else { /* Not in cached mode. No need to populate inode with stat */ - inode = v9fs_get_inode(dir->i_sb, S_IFLNK); + inode = v9fs_get_inode(dir->i_sb, S_IFLNK, 0); if (IS_ERR(inode)) { err = PTR_ERR(inode); goto error; @@ -810,17 +864,17 @@ v9fs_vfs_mknod_dotl(struct inode *dir, struct dentry *dentry, int omode, err); goto error; } - d_instantiate(dentry, inode); err = v9fs_fid_add(dentry, fid); if (err < 0) goto error; + d_instantiate(dentry, inode); fid = NULL; } else { /* * Not in cached mode. No need to populate inode with stat. * socket syscall returns a fd, so we need instantiate */ - inode = v9fs_get_inode(dir->i_sb, mode); + inode = v9fs_get_inode(dir->i_sb, mode, rdev); if (IS_ERR(inode)) { err = PTR_ERR(inode); goto error; @@ -886,6 +940,11 @@ int v9fs_refresh_inode_dotl(struct p9_fid *fid, struct inode *inode) st = p9_client_getattr_dotl(fid, P9_STATS_ALL); if (IS_ERR(st)) return PTR_ERR(st); + /* + * Don't update inode if the file type is different + */ + if ((inode->i_mode & S_IFMT) != (st->st_mode & S_IFMT)) + goto out; spin_lock(&inode->i_lock); /* @@ -897,6 +956,7 @@ int v9fs_refresh_inode_dotl(struct p9_fid *fid, struct inode *inode) if (v9ses->cache) inode->i_size = i_size; spin_unlock(&inode->i_lock); +out: kfree(st); return 0; } diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c index feef6cdc1fd..c70251d47ed 100644 --- a/fs/9p/vfs_super.c +++ b/fs/9p/vfs_super.c @@ -149,7 +149,7 @@ static struct dentry *v9fs_mount(struct file_system_type *fs_type, int flags, else sb->s_d_op = &v9fs_dentry_operations; - inode = v9fs_get_inode(sb, S_IFDIR | mode); + inode = v9fs_get_inode(sb, S_IFDIR | mode, 0); if (IS_ERR(inode)) { retval = PTR_ERR(inode); goto release_sb; diff --git a/fs/block_dev.c b/fs/block_dev.c index ff77262e887..95f786ec7f0 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -1429,6 +1429,11 @@ static int __blkdev_put(struct block_device *bdev, fmode_t mode, int for_part) WARN_ON_ONCE(bdev->bd_holders); sync_blockdev(bdev); kill_bdev(bdev); + /* ->release can cause the old bdi to disappear, + * so must switch it out first + */ + bdev_inode_switch_bdi(bdev->bd_inode, + &default_backing_dev_info); } if (bdev->bd_contains == bdev) { if (disk->fops->release) @@ -1442,8 +1447,6 @@ static int __blkdev_put(struct block_device *bdev, fmode_t mode, int for_part) disk_put_part(bdev->bd_part); bdev->bd_part = NULL; bdev->bd_disk = NULL; - bdev_inode_switch_bdi(bdev->bd_inode, - &default_backing_dev_info); if (bdev != bdev->bd_contains) victim = bdev->bd_contains; bdev->bd_contains = NULL; diff --git a/fs/btrfs/btrfs_inode.h b/fs/btrfs/btrfs_inode.h index 502b9e98867..d9f99a16edd 100644 --- a/fs/btrfs/btrfs_inode.h +++ b/fs/btrfs/btrfs_inode.h @@ -176,7 +176,11 @@ static inline u64 btrfs_ino(struct inode *inode) { u64 ino = BTRFS_I(inode)->location.objectid; - if (ino <= BTRFS_FIRST_FREE_OBJECTID) + /* + * !ino: btree_inode + * type == BTRFS_ROOT_ITEM_KEY: subvol dir + */ + if (!ino || BTRFS_I(inode)->location.type == BTRFS_ROOT_ITEM_KEY) ino = inode->i_ino; return ino; } diff --git a/fs/btrfs/file-item.c b/fs/btrfs/file-item.c index b910694f61e..a1cb7821bec 100644 --- a/fs/btrfs/file-item.c +++ b/fs/btrfs/file-item.c @@ -183,8 +183,10 @@ static int __btrfs_lookup_bio_sums(struct btrfs_root *root, * read from the commit root and sidestep a nasty deadlock * between reading the free space cache and updating the csum tree. */ - if (btrfs_is_free_space_inode(root, inode)) + if (btrfs_is_free_space_inode(root, inode)) { path->search_commit_root = 1; + path->skip_locking = 1; + } disk_bytenr = (u64)bio->bi_sector << 9; if (dio) diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index e7872e485f1..a381cd22f51 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -1075,12 +1075,6 @@ static noinline int prepare_pages(struct btrfs_root *root, struct file *file, start_pos = pos & ~((u64)root->sectorsize - 1); last_pos = ((u64)index + num_pages) << PAGE_CACHE_SHIFT; - if (start_pos > inode->i_size) { - err = btrfs_cont_expand(inode, i_size_read(inode), start_pos); - if (err) - return err; - } - again: for (i = 0; i < num_pages; i++) { pages[i] = find_or_create_page(inode->i_mapping, index + i, @@ -1338,6 +1332,7 @@ static ssize_t btrfs_file_aio_write(struct kiocb *iocb, struct inode *inode = fdentry(file)->d_inode; struct btrfs_root *root = BTRFS_I(inode)->root; loff_t *ppos = &iocb->ki_pos; + u64 start_pos; ssize_t num_written = 0; ssize_t err = 0; size_t count, ocount; @@ -1386,6 +1381,15 @@ static ssize_t btrfs_file_aio_write(struct kiocb *iocb, file_update_time(file); BTRFS_I(inode)->sequence++; + start_pos = round_down(pos, root->sectorsize); + if (start_pos > i_size_read(inode)) { + err = btrfs_cont_expand(inode, i_size_read(inode), start_pos); + if (err) { + mutex_unlock(&inode->i_mutex); + goto out; + } + } + if (unlikely(file->f_flags & O_DIRECT)) { num_written = __btrfs_direct_write(iocb, iov, nr_segs, pos, ppos, count, ocount); @@ -1813,6 +1817,11 @@ static loff_t btrfs_file_llseek(struct file *file, loff_t offset, int origin) goto out; case SEEK_DATA: case SEEK_HOLE: + if (offset >= i_size_read(inode)) { + mutex_unlock(&inode->i_mutex); + return -ENXIO; + } + ret = find_desired_extent(inode, &offset, origin); if (ret) { mutex_unlock(&inode->i_mutex); @@ -1821,11 +1830,11 @@ static loff_t btrfs_file_llseek(struct file *file, loff_t offset, int origin) } if (offset < 0 && !(file->f_mode & FMODE_UNSIGNED_OFFSET)) { - ret = -EINVAL; + offset = -EINVAL; goto out; } if (offset > inode->i_sb->s_maxbytes) { - ret = -EINVAL; + offset = -EINVAL; goto out; } diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 6a265b9f85f..41ac927401d 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -190,9 +190,11 @@ int btrfs_truncate_free_space_cache(struct btrfs_root *root, struct btrfs_path *path, struct inode *inode) { + struct btrfs_block_rsv *rsv; loff_t oldsize; int ret = 0; + rsv = trans->block_rsv; trans->block_rsv = root->orphan_block_rsv; ret = btrfs_block_rsv_check(trans, root, root->orphan_block_rsv, @@ -210,6 +212,8 @@ int btrfs_truncate_free_space_cache(struct btrfs_root *root, */ ret = btrfs_truncate_inode_items(trans, root, inode, 0, BTRFS_EXTENT_DATA_KEY); + + trans->block_rsv = rsv; if (ret) { WARN_ON(1); return ret; diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 0ccc7438ad3..b2d004ad66a 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -1786,7 +1786,7 @@ static int btrfs_finish_ordered_io(struct inode *inode, u64 start, u64 end) &ordered_extent->list); ret = btrfs_ordered_update_i_size(inode, 0, ordered_extent); - if (!ret) { + if (!ret || !test_bit(BTRFS_ORDERED_PREALLOC, &ordered_extent->flags)) { ret = btrfs_update_inode(trans, root, inode); BUG_ON(ret); } @@ -3510,15 +3510,19 @@ int btrfs_cont_expand(struct inode *inode, loff_t oldsize, loff_t size) err = btrfs_drop_extents(trans, inode, cur_offset, cur_offset + hole_size, &hint_byte, 1); - if (err) + if (err) { + btrfs_end_transaction(trans, root); break; + } err = btrfs_insert_file_extent(trans, root, btrfs_ino(inode), cur_offset, 0, 0, hole_size, 0, hole_size, 0, 0, 0); - if (err) + if (err) { + btrfs_end_transaction(trans, root); break; + } btrfs_drop_extent_cache(inode, hole_start, last_byte - 1, 0); @@ -3952,7 +3956,6 @@ struct inode *btrfs_iget(struct super_block *s, struct btrfs_key *location, struct btrfs_root *root, int *new) { struct inode *inode; - int bad_inode = 0; inode = btrfs_iget_locked(s, location->objectid, root); if (!inode) @@ -3968,15 +3971,12 @@ struct inode *btrfs_iget(struct super_block *s, struct btrfs_key *location, if (new) *new = 1; } else { - bad_inode = 1; + unlock_new_inode(inode); + iput(inode); + inode = ERR_PTR(-ESTALE); } } - if (bad_inode) { - iput(inode); - inode = ERR_PTR(-ESTALE); - } - return inode; } @@ -4018,7 +4018,8 @@ struct inode *btrfs_lookup_dentry(struct inode *dir, struct dentry *dentry) memcpy(&location, dentry->d_fsdata, sizeof(struct btrfs_key)); kfree(dentry->d_fsdata); dentry->d_fsdata = NULL; - d_clear_need_lookup(dentry); + /* This thing is hashed, drop it for now */ + d_drop(dentry); } else { ret = btrfs_inode_by_name(dir, dentry, &location); } @@ -4085,7 +4086,15 @@ static void btrfs_dentry_release(struct dentry *dentry) static struct dentry *btrfs_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd) { - return d_splice_alias(btrfs_lookup_dentry(dir, dentry), dentry); + struct dentry *ret; + + ret = d_splice_alias(btrfs_lookup_dentry(dir, dentry), dentry); + if (unlikely(d_need_lookup(dentry))) { + spin_lock(&dentry->d_lock); + dentry->d_flags &= ~DCACHE_NEED_LOOKUP; + spin_unlock(&dentry->d_lock); + } + return ret; } unsigned char btrfs_filetype_table[] = { @@ -4125,7 +4134,8 @@ static int btrfs_real_readdir(struct file *filp, void *dirent, /* special case for "." */ if (filp->f_pos == 0) { - over = filldir(dirent, ".", 1, 1, btrfs_ino(inode), DT_DIR); + over = filldir(dirent, ".", 1, + filp->f_pos, btrfs_ino(inode), DT_DIR); if (over) return 0; filp->f_pos = 1; @@ -4134,7 +4144,7 @@ static int btrfs_real_readdir(struct file *filp, void *dirent, if (filp->f_pos == 1) { u64 pino = parent_ino(filp->f_path.dentry); over = filldir(dirent, "..", 2, - 2, pino, DT_DIR); + filp->f_pos, pino, DT_DIR); if (over) return 0; filp->f_pos = 2; @@ -5823,7 +5833,7 @@ again: add_pending_csums(trans, inode, ordered->file_offset, &ordered->list); ret = btrfs_ordered_update_i_size(inode, 0, ordered); - if (!ret) + if (!ret || !test_bit(BTRFS_ORDERED_PREALLOC, &ordered->flags)) btrfs_update_inode(trans, root, inode); ret = 0; out_unlock: diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 970977aab22..538f65a79ec 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -2177,6 +2177,11 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd, if (!(src_file->f_mode & FMODE_READ)) goto out_fput; + /* don't make the dst file partly checksummed */ + if ((BTRFS_I(src)->flags & BTRFS_INODE_NODATASUM) != + (BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM)) + goto out_fput; + ret = -EISDIR; if (S_ISDIR(src->i_mode) || S_ISDIR(inode->i_mode)) goto out_fput; @@ -2220,6 +2225,16 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd, !IS_ALIGNED(destoff, bs)) goto out_unlock; + if (destoff > inode->i_size) { + ret = btrfs_cont_expand(inode, inode->i_size, destoff); + if (ret) + goto out_unlock; + } + + /* truncate page cache pages from target inode range */ + truncate_inode_pages_range(&inode->i_data, destoff, + PAGE_CACHE_ALIGN(destoff + len) - 1); + /* do any pending delalloc/csum calc on src, one way or another, and lock file content */ while (1) { @@ -2236,10 +2251,6 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd, btrfs_wait_ordered_range(src, off, len); } - /* truncate page cache pages from target inode range */ - truncate_inode_pages_range(&inode->i_data, off, - ALIGN(off + len, PAGE_CACHE_SIZE) - 1); - /* clone data */ key.objectid = btrfs_ino(src); key.type = BTRFS_EXTENT_DATA_KEY; @@ -2317,7 +2328,12 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd, else new_key.offset = destoff; - trans = btrfs_start_transaction(root, 1); + /* + * 1 - adjusting old extent (we may have to split it) + * 1 - add new extent + * 1 - inode update + */ + trans = btrfs_start_transaction(root, 3); if (IS_ERR(trans)) { ret = PTR_ERR(trans); goto out; @@ -2325,14 +2341,21 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd, if (type == BTRFS_FILE_EXTENT_REG || type == BTRFS_FILE_EXTENT_PREALLOC) { + /* + * a | --- range to clone ---| b + * | ------------- extent ------------- | + */ + + /* substract range b */ + if (key.offset + datal > off + len) + datal = off + len - key.offset; + + /* substract range a */ if (off > key.offset) { datao += off - key.offset; datal -= off - key.offset; } - if (key.offset + datal > off + len) - datal = off + len - key.offset; - ret = btrfs_drop_extents(trans, inode, new_key.offset, new_key.offset + datal, @@ -2429,7 +2452,6 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd, if (endoff > inode->i_size) btrfs_i_size_write(inode, endoff); - BTRFS_I(inode)->flags = BTRFS_I(src)->flags; ret = btrfs_update_inode(trans, root, inode); BUG_ON(ret); btrfs_end_transaction(trans, root); diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 7dc36fab4af..e24b7964a15 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -884,6 +884,7 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans, struct btrfs_root *tree_root = fs_info->tree_root; struct btrfs_root *root = pending->root; struct btrfs_root *parent_root; + struct btrfs_block_rsv *rsv; struct inode *parent_inode; struct dentry *parent; struct dentry *dentry; @@ -895,6 +896,8 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans, u64 objectid; u64 root_flags; + rsv = trans->block_rsv; + new_root_item = kmalloc(sizeof(*new_root_item), GFP_NOFS); if (!new_root_item) { pending->error = -ENOMEM; @@ -1002,6 +1005,7 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans, btrfs_orphan_post_snapshot(trans, pending); fail: kfree(new_root_item); + trans->block_rsv = rsv; btrfs_block_rsv_release(root, &pending->block_rsv, (u64)-1); return 0; } diff --git a/fs/btrfs/xattr.c b/fs/btrfs/xattr.c index d733b9cfea3..69565e5fc6a 100644 --- a/fs/btrfs/xattr.c +++ b/fs/btrfs/xattr.c @@ -116,6 +116,12 @@ static int do_setxattr(struct btrfs_trans_handle *trans, if (ret) goto out; btrfs_release_path(path); + + /* + * remove the attribute + */ + if (!value) + goto out; } again: @@ -158,6 +164,9 @@ out: return ret; } +/* + * @value: "" makes the attribute to empty, NULL removes it + */ int __btrfs_setxattr(struct btrfs_trans_handle *trans, struct inode *inode, const char *name, const void *value, size_t size, int flags) diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c index fee028b5332..86c59e16ba7 100644 --- a/fs/ceph/mds_client.c +++ b/fs/ceph/mds_client.c @@ -1595,7 +1595,7 @@ static int set_request_path_attr(struct inode *rinode, struct dentry *rdentry, r = build_dentry_path(rdentry, ppath, pathlen, ino, freepath); dout(" dentry %p %llx/%.*s\n", rdentry, *ino, *pathlen, *ppath); - } else if (rpath) { + } else if (rpath || rino) { *ino = rino; *ppath = rpath; *pathlen = strlen(rpath); diff --git a/fs/ceph/super.c b/fs/ceph/super.c index d47c5ec7fb1..88bacaf385d 100644 --- a/fs/ceph/super.c +++ b/fs/ceph/super.c @@ -813,8 +813,8 @@ static struct dentry *ceph_mount(struct file_system_type *fs_type, fsc = create_fs_client(fsopt, opt); if (IS_ERR(fsc)) { res = ERR_CAST(fsc); - kfree(fsopt); - kfree(opt); + destroy_mount_options(fsopt); + ceph_destroy_options(opt); goto out_final; } diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c index e76bfeb6826..30acd22147e 100644 --- a/fs/cifs/cifsencrypt.c +++ b/fs/cifs/cifsencrypt.c @@ -351,9 +351,7 @@ static int build_avpair_blob(struct cifs_ses *ses, const struct nls_table *nls_cp) { unsigned int dlen; - unsigned int wlen; - unsigned int size = 6 * sizeof(struct ntlmssp2_name); - __le64 curtime; + unsigned int size = 2 * sizeof(struct ntlmssp2_name); char *defdmname = "WORKGROUP"; unsigned char *blobptr; struct ntlmssp2_name *attrptr; @@ -365,15 +363,14 @@ build_avpair_blob(struct cifs_ses *ses, const struct nls_table *nls_cp) } dlen = strlen(ses->domainName); - wlen = strlen(ses->server->hostname); - /* The length of this blob is a size which is - * six times the size of a structure which holds name/size + - * two times the unicode length of a domain name + - * two times the unicode length of a server name + - * size of a timestamp (which is 8 bytes). + /* + * The length of this blob is two times the size of a + * structure (av pair) which holds name/size + * ( for NTLMSSP_AV_NB_DOMAIN_NAME followed by NTLMSSP_AV_EOL ) + + * unicode length of a netbios domain name */ - ses->auth_key.len = size + 2 * (2 * dlen) + 2 * (2 * wlen) + 8; + ses->auth_key.len = size + 2 * dlen; ses->auth_key.response = kzalloc(ses->auth_key.len, GFP_KERNEL); if (!ses->auth_key.response) { ses->auth_key.len = 0; @@ -384,44 +381,15 @@ build_avpair_blob(struct cifs_ses *ses, const struct nls_table *nls_cp) blobptr = ses->auth_key.response; attrptr = (struct ntlmssp2_name *) blobptr; + /* + * As defined in MS-NTLM 3.3.2, just this av pair field + * is sufficient as part of the temp + */ attrptr->type = cpu_to_le16(NTLMSSP_AV_NB_DOMAIN_NAME); attrptr->length = cpu_to_le16(2 * dlen); blobptr = (unsigned char *)attrptr + sizeof(struct ntlmssp2_name); cifs_strtoUCS((__le16 *)blobptr, ses->domainName, dlen, nls_cp); - blobptr += 2 * dlen; - attrptr = (struct ntlmssp2_name *) blobptr; - - attrptr->type = cpu_to_le16(NTLMSSP_AV_NB_COMPUTER_NAME); - attrptr->length = cpu_to_le16(2 * wlen); - blobptr = (unsigned char *)attrptr + sizeof(struct ntlmssp2_name); - cifs_strtoUCS((__le16 *)blobptr, ses->server->hostname, wlen, nls_cp); - - blobptr += 2 * wlen; - attrptr = (struct ntlmssp2_name *) blobptr; - - attrptr->type = cpu_to_le16(NTLMSSP_AV_DNS_DOMAIN_NAME); - attrptr->length = cpu_to_le16(2 * dlen); - blobptr = (unsigned char *)attrptr + sizeof(struct ntlmssp2_name); - cifs_strtoUCS((__le16 *)blobptr, ses->domainName, dlen, nls_cp); - - blobptr += 2 * dlen; - attrptr = (struct ntlmssp2_name *) blobptr; - - attrptr->type = cpu_to_le16(NTLMSSP_AV_DNS_COMPUTER_NAME); - attrptr->length = cpu_to_le16(2 * wlen); - blobptr = (unsigned char *)attrptr + sizeof(struct ntlmssp2_name); - cifs_strtoUCS((__le16 *)blobptr, ses->server->hostname, wlen, nls_cp); - - blobptr += 2 * wlen; - attrptr = (struct ntlmssp2_name *) blobptr; - - attrptr->type = cpu_to_le16(NTLMSSP_AV_TIMESTAMP); - attrptr->length = cpu_to_le16(sizeof(__le64)); - blobptr = (unsigned char *)attrptr + sizeof(struct ntlmssp2_name); - curtime = cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME)); - memcpy(blobptr, &curtime, sizeof(__le64)); - return 0; } diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index f93eb948d07..54b8f1e7da9 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -548,6 +548,12 @@ cifs_get_root(struct smb_vol *vol, struct super_block *sb) struct inode *dir = dentry->d_inode; struct dentry *child; + if (!dir) { + dput(dentry); + dentry = ERR_PTR(-ENOENT); + break; + } + /* skip separators */ while (*s == sep) s++; @@ -563,10 +569,6 @@ cifs_get_root(struct smb_vol *vol, struct super_block *sb) mutex_unlock(&dir->i_mutex); dput(dentry); dentry = child; - if (!dentry->d_inode) { - dput(dentry); - dentry = ERR_PTR(-ENOENT); - } } while (!IS_ERR(dentry)); _FreeXid(xid); kfree(full_path); diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index aac37d99a48..a80f7bd97b9 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -4079,7 +4079,8 @@ int CIFSFindNext(const int xid, struct cifs_tcon *tcon, T2_FNEXT_RSP_PARMS *parms; char *response_data; int rc = 0; - int bytes_returned, name_len; + int bytes_returned; + unsigned int name_len; __u16 params, byte_count; cFYI(1, "In FindNext"); diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 633c246b677..f4af4cc3750 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1298,7 +1298,7 @@ cifs_parse_mount_options(const char *mountdata, const char *devname, /* ignore */ } else if (strnicmp(data, "guest", 5) == 0) { /* ignore */ - } else if (strnicmp(data, "rw", 2) == 0) { + } else if (strnicmp(data, "rw", 2) == 0 && strlen(data) == 2) { /* ignore */ } else if (strnicmp(data, "ro", 2) == 0) { /* ignore */ @@ -1401,7 +1401,7 @@ cifs_parse_mount_options(const char *mountdata, const char *devname, vol->server_ino = 1; } else if (strnicmp(data, "noserverino", 9) == 0) { vol->server_ino = 0; - } else if (strnicmp(data, "rwpidforward", 4) == 0) { + } else if (strnicmp(data, "rwpidforward", 12) == 0) { vol->rwpidforward = 1; } else if (strnicmp(data, "cifsacl", 7) == 0) { vol->cifs_acl = 1; diff --git a/fs/compat.c b/fs/compat.c index 0b48d018e38..58b1da45989 100644 --- a/fs/compat.c +++ b/fs/compat.c @@ -1675,11 +1675,6 @@ asmlinkage long compat_sys_ppoll(struct pollfd __user *ufds, } #endif /* HAVE_SET_RESTORE_SIGMASK */ -long asmlinkage compat_sys_nfsservctl(int cmd, void *notused, void *notused2) -{ - return sys_ni_syscall(); -} - #ifdef CONFIG_EPOLL #ifdef HAVE_SET_RESTORE_SIGMASK diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c index 04da6acde85..12661e1deed 100644 --- a/fs/ext3/inode.c +++ b/fs/ext3/inode.c @@ -1134,7 +1134,7 @@ struct buffer_head *ext3_bread(handle_t *handle, struct inode *inode, return bh; if (buffer_uptodate(bh)) return bh; - ll_rw_block(READ_META, 1, &bh); + ll_rw_block(READ | REQ_META | REQ_PRIO, 1, &bh); wait_on_buffer(bh); if (buffer_uptodate(bh)) return bh; @@ -2807,7 +2807,7 @@ make_io: trace_ext3_load_inode(inode); get_bh(bh); bh->b_end_io = end_buffer_read_sync; - submit_bh(READ_META, bh); + submit_bh(READ | REQ_META | REQ_PRIO, bh); wait_on_buffer(bh); if (!buffer_uptodate(bh)) { ext3_error(inode->i_sb, "ext3_get_inode_loc", diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c index 5571708b6a5..0629e09f651 100644 --- a/fs/ext3/namei.c +++ b/fs/ext3/namei.c @@ -922,7 +922,8 @@ restart: bh = ext3_getblk(NULL, dir, b++, 0, &err); bh_use[ra_max] = bh; if (bh) - ll_rw_block(READ_META, 1, &bh); + ll_rw_block(READ | REQ_META | REQ_PRIO, + 1, &bh); } } if ((bh = bh_use[ra_ptr++]) == NULL) diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index e717dfd2f2b..b7d7bd0f066 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -175,6 +175,7 @@ struct mpage_da_data { */ #define EXT4_IO_END_UNWRITTEN 0x0001 #define EXT4_IO_END_ERROR 0x0002 +#define EXT4_IO_END_QUEUED 0x0004 struct ext4_io_page { struct page *p_page; diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index c4da98a959a..986e2388f03 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -121,9 +121,6 @@ void ext4_evict_inode(struct inode *inode) trace_ext4_evict_inode(inode); - mutex_lock(&inode->i_mutex); - ext4_flush_completed_IO(inode); - mutex_unlock(&inode->i_mutex); ext4_ioend_wait(inode); if (inode->i_nlink) { @@ -650,7 +647,7 @@ struct buffer_head *ext4_bread(handle_t *handle, struct inode *inode, return bh; if (buffer_uptodate(bh)) return bh; - ll_rw_block(READ_META, 1, &bh); + ll_rw_block(READ | REQ_META | REQ_PRIO, 1, &bh); wait_on_buffer(bh); if (buffer_uptodate(bh)) return bh; @@ -3301,7 +3298,7 @@ make_io: trace_ext4_load_inode(inode); get_bh(bh); bh->b_end_io = end_buffer_read_sync; - submit_bh(READ_META, bh); + submit_bh(READ | REQ_META | REQ_PRIO, bh); wait_on_buffer(bh); if (!buffer_uptodate(bh)) { EXT4_ERROR_INODE_BLOCK(inode, block, diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c index f8068c7bae9..1c924faeb6c 100644 --- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -922,7 +922,8 @@ restart: bh = ext4_getblk(NULL, dir, b++, 0, &err); bh_use[ra_max] = bh; if (bh) - ll_rw_block(READ_META, 1, &bh); + ll_rw_block(READ | REQ_META | REQ_PRIO, + 1, &bh); } } if ((bh = bh_use[ra_ptr++]) == NULL) diff --git a/fs/ext4/page-io.c b/fs/ext4/page-io.c index 78839af7ce2..92f38ee13f8 100644 --- a/fs/ext4/page-io.c +++ b/fs/ext4/page-io.c @@ -142,7 +142,23 @@ static void ext4_end_io_work(struct work_struct *work) unsigned long flags; int ret; - mutex_lock(&inode->i_mutex); + if (!mutex_trylock(&inode->i_mutex)) { + /* + * Requeue the work instead of waiting so that the work + * items queued after this can be processed. + */ + queue_work(EXT4_SB(inode->i_sb)->dio_unwritten_wq, &io->work); + /* + * To prevent the ext4-dio-unwritten thread from keeping + * requeueing end_io requests and occupying cpu for too long, + * yield the cpu if it sees an end_io request that has already + * been requeued. + */ + if (io->flag & EXT4_IO_END_QUEUED) + yield(); + io->flag |= EXT4_IO_END_QUEUED; + return; + } ret = ext4_end_io_nolock(io); if (ret < 0) { mutex_unlock(&inode->i_mutex); diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c index 640fc229df1..5cb8614508c 100644 --- a/fs/fuse/dev.c +++ b/fs/fuse/dev.c @@ -258,10 +258,14 @@ void fuse_queue_forget(struct fuse_conn *fc, struct fuse_forget_link *forget, forget->forget_one.nlookup = nlookup; spin_lock(&fc->lock); - fc->forget_list_tail->next = forget; - fc->forget_list_tail = forget; - wake_up(&fc->waitq); - kill_fasync(&fc->fasync, SIGIO, POLL_IN); + if (fc->connected) { + fc->forget_list_tail->next = forget; + fc->forget_list_tail = forget; + wake_up(&fc->waitq); + kill_fasync(&fc->fasync, SIGIO, POLL_IN); + } else { + kfree(forget); + } spin_unlock(&fc->lock); } @@ -1358,6 +1362,10 @@ static int fuse_notify_inval_entry(struct fuse_conn *fc, unsigned int size, if (outarg.namelen > FUSE_NAME_MAX) goto err; + err = -EINVAL; + if (size != sizeof(outarg) + outarg.namelen + 1) + goto err; + name.name = buf; name.len = outarg.namelen; err = fuse_copy_one(cs, buf, outarg.namelen + 1); diff --git a/fs/fuse/file.c b/fs/fuse/file.c index d480d9af46c..594f07a81c2 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -14,6 +14,7 @@ #include <linux/sched.h> #include <linux/module.h> #include <linux/compat.h> +#include <linux/swap.h> static const struct file_operations fuse_direct_io_file_operations; @@ -245,6 +246,12 @@ void fuse_release_common(struct file *file, int opcode) req = ff->reserved_req; fuse_prepare_release(ff, file->f_flags, opcode); + if (ff->flock) { + struct fuse_release_in *inarg = &req->misc.release.in; + inarg->release_flags |= FUSE_RELEASE_FLOCK_UNLOCK; + inarg->lock_owner = fuse_lock_owner_id(ff->fc, + (fl_owner_t) file); + } /* Hold vfsmount and dentry until release is finished */ path_get(&file->f_path); req->misc.release.path = file->f_path; @@ -755,18 +762,6 @@ static size_t fuse_send_write(struct fuse_req *req, struct file *file, return req->misc.write.out.size; } -static int fuse_write_begin(struct file *file, struct address_space *mapping, - loff_t pos, unsigned len, unsigned flags, - struct page **pagep, void **fsdata) -{ - pgoff_t index = pos >> PAGE_CACHE_SHIFT; - - *pagep = grab_cache_page_write_begin(mapping, index, flags); - if (!*pagep) - return -ENOMEM; - return 0; -} - void fuse_write_update_size(struct inode *inode, loff_t pos) { struct fuse_conn *fc = get_fuse_conn(inode); @@ -779,62 +774,6 @@ void fuse_write_update_size(struct inode *inode, loff_t pos) spin_unlock(&fc->lock); } -static int fuse_buffered_write(struct file *file, struct inode *inode, - loff_t pos, unsigned count, struct page *page) -{ - int err; - size_t nres; - struct fuse_conn *fc = get_fuse_conn(inode); - unsigned offset = pos & (PAGE_CACHE_SIZE - 1); - struct fuse_req *req; - - if (is_bad_inode(inode)) - return -EIO; - - /* - * Make sure writepages on the same page are not mixed up with - * plain writes. - */ - fuse_wait_on_page_writeback(inode, page->index); - - req = fuse_get_req(fc); - if (IS_ERR(req)) - return PTR_ERR(req); - - req->in.argpages = 1; - req->num_pages = 1; - req->pages[0] = page; - req->page_offset = offset; - nres = fuse_send_write(req, file, pos, count, NULL); - err = req->out.h.error; - fuse_put_request(fc, req); - if (!err && !nres) - err = -EIO; - if (!err) { - pos += nres; - fuse_write_update_size(inode, pos); - if (count == PAGE_CACHE_SIZE) - SetPageUptodate(page); - } - fuse_invalidate_attr(inode); - return err ? err : nres; -} - -static int fuse_write_end(struct file *file, struct address_space *mapping, - loff_t pos, unsigned len, unsigned copied, - struct page *page, void *fsdata) -{ - struct inode *inode = mapping->host; - int res = 0; - - if (copied) - res = fuse_buffered_write(file, inode, pos, copied, page); - - unlock_page(page); - page_cache_release(page); - return res; -} - static size_t fuse_send_write_pages(struct fuse_req *req, struct file *file, struct inode *inode, loff_t pos, size_t count) @@ -908,6 +847,8 @@ static ssize_t fuse_fill_write_pages(struct fuse_req *req, pagefault_enable(); flush_dcache_page(page); + mark_page_accessed(page); + if (!tmp) { unlock_page(page); page_cache_release(page); @@ -1559,11 +1500,14 @@ static int fuse_file_flock(struct file *file, int cmd, struct file_lock *fl) struct fuse_conn *fc = get_fuse_conn(inode); int err; - if (fc->no_lock) { + if (fc->no_flock) { err = flock_lock_file_wait(file, fl); } else { + struct fuse_file *ff = file->private_data; + /* emulate flock with POSIX locks */ fl->fl_owner = (fl_owner_t) file; + ff->flock = true; err = fuse_setlk(file, fl, 1); } @@ -2201,8 +2145,6 @@ static const struct address_space_operations fuse_file_aops = { .readpage = fuse_readpage, .writepage = fuse_writepage, .launder_page = fuse_launder_page, - .write_begin = fuse_write_begin, - .write_end = fuse_write_end, .readpages = fuse_readpages, .set_page_dirty = __set_page_dirty_nobuffers, .bmap = fuse_bmap, diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h index c6aa2d4b851..cf6db0a9321 100644 --- a/fs/fuse/fuse_i.h +++ b/fs/fuse/fuse_i.h @@ -135,6 +135,9 @@ struct fuse_file { /** Wait queue head for poll */ wait_queue_head_t poll_wait; + + /** Has flock been performed on this file? */ + bool flock:1; }; /** One input argument of a request */ @@ -448,7 +451,7 @@ struct fuse_conn { /** Is removexattr not implemented by fs? */ unsigned no_removexattr:1; - /** Are file locking primitives not implemented by fs? */ + /** Are posix file locking primitives not implemented by fs? */ unsigned no_lock:1; /** Is access not implemented by fs? */ @@ -472,6 +475,9 @@ struct fuse_conn { /** Don't apply umask to creation modes */ unsigned dont_mask:1; + /** Are BSD file locking primitives not implemented by fs? */ + unsigned no_flock:1; + /** The number of requests waiting for completion */ atomic_t num_waiting; diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index 38f84cd48b6..add96f6ffda 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -71,7 +71,7 @@ struct fuse_mount_data { unsigned blksize; }; -struct fuse_forget_link *fuse_alloc_forget() +struct fuse_forget_link *fuse_alloc_forget(void) { return kzalloc(sizeof(struct fuse_forget_link), GFP_KERNEL); } @@ -809,6 +809,13 @@ static void process_init_reply(struct fuse_conn *fc, struct fuse_req *req) fc->async_read = 1; if (!(arg->flags & FUSE_POSIX_LOCKS)) fc->no_lock = 1; + if (arg->minor >= 17) { + if (!(arg->flags & FUSE_FLOCK_LOCKS)) + fc->no_flock = 1; + } else { + if (!(arg->flags & FUSE_POSIX_LOCKS)) + fc->no_flock = 1; + } if (arg->flags & FUSE_ATOMIC_O_TRUNC) fc->atomic_o_trunc = 1; if (arg->minor >= 9) { @@ -823,6 +830,7 @@ static void process_init_reply(struct fuse_conn *fc, struct fuse_req *req) } else { ra_pages = fc->max_read / PAGE_CACHE_SIZE; fc->no_lock = 1; + fc->no_flock = 1; } fc->bdi.ra_pages = min(fc->bdi.ra_pages, ra_pages); @@ -843,7 +851,8 @@ static void fuse_send_init(struct fuse_conn *fc, struct fuse_req *req) arg->minor = FUSE_KERNEL_MINOR_VERSION; arg->max_readahead = fc->bdi.ra_pages * PAGE_CACHE_SIZE; arg->flags |= FUSE_ASYNC_READ | FUSE_POSIX_LOCKS | FUSE_ATOMIC_O_TRUNC | - FUSE_EXPORT_SUPPORT | FUSE_BIG_WRITES | FUSE_DONT_MASK; + FUSE_EXPORT_SUPPORT | FUSE_BIG_WRITES | FUSE_DONT_MASK | + FUSE_FLOCK_LOCKS; req->in.h.opcode = FUSE_INIT; req->in.numargs = 1; req->in.args[0].size = sizeof(*arg); diff --git a/fs/gfs2/log.c b/fs/gfs2/log.c index 85c62923ee2..59864643436 100644 --- a/fs/gfs2/log.c +++ b/fs/gfs2/log.c @@ -624,9 +624,9 @@ static void log_write_header(struct gfs2_sbd *sdp, u32 flags, int pull) bh->b_end_io = end_buffer_write_sync; get_bh(bh); if (test_bit(SDF_NOBARRIERS, &sdp->sd_flags)) - submit_bh(WRITE_SYNC | REQ_META, bh); + submit_bh(WRITE_SYNC | REQ_META | REQ_PRIO, bh); else - submit_bh(WRITE_FLUSH_FUA | REQ_META, bh); + submit_bh(WRITE_FLUSH_FUA | REQ_META | REQ_PRIO, bh); wait_on_buffer(bh); if (!buffer_uptodate(bh)) diff --git a/fs/gfs2/meta_io.c b/fs/gfs2/meta_io.c index 747238cd9f9..be29858900f 100644 --- a/fs/gfs2/meta_io.c +++ b/fs/gfs2/meta_io.c @@ -37,7 +37,7 @@ static int gfs2_aspace_writepage(struct page *page, struct writeback_control *wb { struct buffer_head *bh, *head; int nr_underway = 0; - int write_op = REQ_META | + int write_op = REQ_META | REQ_PRIO | (wbc->sync_mode == WB_SYNC_ALL ? WRITE_SYNC : WRITE); BUG_ON(!PageLocked(page)); @@ -225,7 +225,7 @@ int gfs2_meta_read(struct gfs2_glock *gl, u64 blkno, int flags, } bh->b_end_io = end_buffer_read_sync; get_bh(bh); - submit_bh(READ_SYNC | REQ_META, bh); + submit_bh(READ_SYNC | REQ_META | REQ_PRIO, bh); if (!(flags & DIO_WAIT)) return 0; @@ -435,7 +435,7 @@ struct buffer_head *gfs2_meta_ra(struct gfs2_glock *gl, u64 dblock, u32 extlen) if (buffer_uptodate(first_bh)) goto out; if (!buffer_locked(first_bh)) - ll_rw_block(READ_SYNC | REQ_META, 1, &first_bh); + ll_rw_block(READ_SYNC | REQ_META | REQ_PRIO, 1, &first_bh); dblock++; extlen--; diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c index 3bc073a4cf8..079587e5384 100644 --- a/fs/gfs2/ops_fstype.c +++ b/fs/gfs2/ops_fstype.c @@ -224,7 +224,7 @@ static int gfs2_read_super(struct gfs2_sbd *sdp, sector_t sector, int silent) bio->bi_end_io = end_bio_io_page; bio->bi_private = page; - submit_bio(READ_SYNC | REQ_META, bio); + submit_bio(READ_SYNC | REQ_META | REQ_PRIO, bio); wait_on_page_locked(page); bio_put(bio); if (!PageUptodate(page)) { diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c index 42e8d23bc04..0e8bb13381e 100644 --- a/fs/gfs2/quota.c +++ b/fs/gfs2/quota.c @@ -709,7 +709,7 @@ get_a_page: set_buffer_uptodate(bh); if (!buffer_uptodate(bh)) { - ll_rw_block(READ_META, 1, &bh); + ll_rw_block(READ | REQ_META | REQ_PRIO, 1, &bh); wait_on_buffer(bh); if (!buffer_uptodate(bh)) goto unlock_out; diff --git a/fs/hfsplus/super.c b/fs/hfsplus/super.c index c106ca22e81..d24a9b666a2 100644 --- a/fs/hfsplus/super.c +++ b/fs/hfsplus/super.c @@ -344,6 +344,7 @@ static int hfsplus_fill_super(struct super_block *sb, void *data, int silent) struct inode *root, *inode; struct qstr str; struct nls_table *nls = NULL; + u64 last_fs_block, last_fs_page; int err; err = -EINVAL; @@ -399,9 +400,13 @@ static int hfsplus_fill_super(struct super_block *sb, void *data, int silent) if (!sbi->rsrc_clump_blocks) sbi->rsrc_clump_blocks = 1; - err = generic_check_addressable(sbi->alloc_blksz_shift, - sbi->total_blocks); - if (err) { + err = -EFBIG; + last_fs_block = sbi->total_blocks - 1; + last_fs_page = (last_fs_block << sbi->alloc_blksz_shift) >> + PAGE_CACHE_SHIFT; + + if ((last_fs_block > (sector_t)(~0ULL) >> (sbi->alloc_blksz_shift - 9)) || + (last_fs_page > (pgoff_t)(~0ULL))) { printk(KERN_ERR "hfs: filesystem size too large.\n"); goto out_free_vhdr; } @@ -525,8 +530,8 @@ out_close_cat_tree: out_close_ext_tree: hfs_btree_close(sbi->ext_tree); out_free_vhdr: - kfree(sbi->s_vhdr); - kfree(sbi->s_backup_vhdr); + kfree(sbi->s_vhdr_buf); + kfree(sbi->s_backup_vhdr_buf); out_unload_nls: unload_nls(sbi->nls); unload_nls(nls); diff --git a/fs/hfsplus/wrapper.c b/fs/hfsplus/wrapper.c index 10e515a0d45..7daf4b852d1 100644 --- a/fs/hfsplus/wrapper.c +++ b/fs/hfsplus/wrapper.c @@ -272,9 +272,9 @@ reread: return 0; out_free_backup_vhdr: - kfree(sbi->s_backup_vhdr); + kfree(sbi->s_backup_vhdr_buf); out_free_vhdr: - kfree(sbi->s_vhdr); + kfree(sbi->s_vhdr_buf); out: return error; } diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c index 87b6e0421c1..ec889538e5a 100644 --- a/fs/hugetlbfs/inode.c +++ b/fs/hugetlbfs/inode.c @@ -491,6 +491,7 @@ static struct inode *hugetlbfs_get_inode(struct super_block *sb, uid_t uid, inode->i_op = &page_symlink_inode_operations; break; } + lockdep_annotate_inode_mutex_key(inode); } return inode; } diff --git a/fs/inode.c b/fs/inode.c index 73920d555c8..ec7924696a1 100644 --- a/fs/inode.c +++ b/fs/inode.c @@ -848,16 +848,9 @@ struct inode *new_inode(struct super_block *sb) } EXPORT_SYMBOL(new_inode); -/** - * unlock_new_inode - clear the I_NEW state and wake up any waiters - * @inode: new inode to unlock - * - * Called when the inode is fully initialised to clear the new state of the - * inode and wake up anyone waiting for the inode to finish initialisation. - */ -void unlock_new_inode(struct inode *inode) -{ #ifdef CONFIG_DEBUG_LOCK_ALLOC +void lockdep_annotate_inode_mutex_key(struct inode *inode) +{ if (S_ISDIR(inode->i_mode)) { struct file_system_type *type = inode->i_sb->s_type; @@ -873,7 +866,20 @@ void unlock_new_inode(struct inode *inode) &type->i_mutex_dir_key); } } +} +EXPORT_SYMBOL(lockdep_annotate_inode_mutex_key); #endif + +/** + * unlock_new_inode - clear the I_NEW state and wake up any waiters + * @inode: new inode to unlock + * + * Called when the inode is fully initialised to clear the new state of the + * inode and wake up anyone waiting for the inode to finish initialisation. + */ +void unlock_new_inode(struct inode *inode) +{ + lockdep_annotate_inode_mutex_key(inode); spin_lock(&inode->i_lock); WARN_ON(!(inode->i_state & I_NEW)); inode->i_state &= ~I_NEW; diff --git a/fs/namei.c b/fs/namei.c index 2826db35dc2..0b3138de2a3 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -721,31 +721,22 @@ static int follow_automount(struct path *path, unsigned flags, if (!path->dentry->d_op || !path->dentry->d_op->d_automount) return -EREMOTE; - /* We don't want to mount if someone supplied AT_NO_AUTOMOUNT - * and this is the terminal part of the path. + /* We don't want to mount if someone's just doing a stat - + * unless they're stat'ing a directory and appended a '/' to + * the name. + * + * We do, however, want to mount if someone wants to open or + * create a file of any type under the mountpoint, wants to + * traverse through the mountpoint or wants to open the + * mounted directory. Also, autofs may mark negative dentries + * as being automount points. These will need the attentions + * of the daemon to instantiate them before they can be used. */ - if ((flags & LOOKUP_NO_AUTOMOUNT) && !(flags & LOOKUP_PARENT)) - return -EISDIR; /* we actually want to stop here */ + if (!(flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY | + LOOKUP_OPEN | LOOKUP_CREATE | LOOKUP_AUTOMOUNT)) && + path->dentry->d_inode) + return -EISDIR; - /* - * We don't want to mount if someone's just doing a stat and they've - * set AT_SYMLINK_NOFOLLOW - unless they're stat'ing a directory and - * appended a '/' to the name. - */ - if (!(flags & LOOKUP_FOLLOW)) { - /* We do, however, want to mount if someone wants to open or - * create a file of any type under the mountpoint, wants to - * traverse through the mountpoint or wants to open the mounted - * directory. - * Also, autofs may mark negative dentries as being automount - * points. These will need the attentions of the daemon to - * instantiate them before they can be used. - */ - if (!(flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY | - LOOKUP_OPEN | LOOKUP_CREATE)) && - path->dentry->d_inode) - return -EISDIR; - } current->total_link_count++; if (current->total_link_count >= 40) return -ELOOP; @@ -2619,6 +2610,7 @@ int vfs_rmdir(struct inode *dir, struct dentry *dentry) if (!dir->i_op->rmdir) return -EPERM; + dget(dentry); mutex_lock(&dentry->d_inode->i_mutex); error = -EBUSY; @@ -2639,6 +2631,7 @@ int vfs_rmdir(struct inode *dir, struct dentry *dentry) out: mutex_unlock(&dentry->d_inode->i_mutex); + dput(dentry); if (!error) d_delete(dentry); return error; @@ -3028,6 +3021,7 @@ static int vfs_rename_dir(struct inode *old_dir, struct dentry *old_dentry, if (error) return error; + dget(new_dentry); if (target) mutex_lock(&target->i_mutex); @@ -3048,6 +3042,7 @@ static int vfs_rename_dir(struct inode *old_dir, struct dentry *old_dentry, out: if (target) mutex_unlock(&target->i_mutex); + dput(new_dentry); if (!error) if (!(old_dir->i_sb->s_type->fs_flags & FS_RENAME_DOES_D_MOVE)) d_move(old_dentry,new_dentry); diff --git a/fs/namespace.c b/fs/namespace.c index 22bfe8273c6..b4febb29d3b 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -1757,7 +1757,7 @@ static int do_loopback(struct path *path, char *old_name, return err; if (!old_name || !*old_name) return -EINVAL; - err = kern_path(old_name, LOOKUP_FOLLOW, &old_path); + err = kern_path(old_name, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, &old_path); if (err) return err; diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h index 1ec1a85fa71..3e93e9a1bee 100644 --- a/fs/nfs/nfs4_fs.h +++ b/fs/nfs/nfs4_fs.h @@ -56,6 +56,9 @@ enum nfs4_session_state { NFS4_SESSION_DRAINING, }; +#define NFS4_RENEW_TIMEOUT 0x01 +#define NFS4_RENEW_DELEGATION_CB 0x02 + struct nfs4_minor_version_ops { u32 minor_version; @@ -225,7 +228,7 @@ struct nfs4_state_recovery_ops { }; struct nfs4_state_maintenance_ops { - int (*sched_state_renewal)(struct nfs_client *, struct rpc_cred *); + int (*sched_state_renewal)(struct nfs_client *, struct rpc_cred *, unsigned); struct rpc_cred * (*get_state_renewal_cred_locked)(struct nfs_client *); int (*renew_lease)(struct nfs_client *, struct rpc_cred *); }; @@ -237,8 +240,6 @@ extern const struct inode_operations nfs4_dir_inode_operations; extern int nfs4_proc_setclientid(struct nfs_client *, u32, unsigned short, struct rpc_cred *, struct nfs4_setclientid_res *); extern int nfs4_proc_setclientid_confirm(struct nfs_client *, struct nfs4_setclientid_res *arg, struct rpc_cred *); extern int nfs4_proc_exchange_id(struct nfs_client *clp, struct rpc_cred *cred); -extern int nfs4_proc_async_renew(struct nfs_client *, struct rpc_cred *); -extern int nfs4_proc_renew(struct nfs_client *, struct rpc_cred *); extern int nfs4_init_clientid(struct nfs_client *, struct rpc_cred *); extern int nfs41_init_clientid(struct nfs_client *, struct rpc_cred *); extern int nfs4_do_close(struct nfs4_state *state, gfp_t gfp_mask, int wait, bool roc); @@ -349,6 +350,7 @@ extern void nfs4_close_sync(struct nfs4_state *, fmode_t); extern void nfs4_state_set_mode_locked(struct nfs4_state *, fmode_t); extern void nfs4_schedule_lease_recovery(struct nfs_client *); extern void nfs4_schedule_state_manager(struct nfs_client *); +extern void nfs4_schedule_path_down_recovery(struct nfs_client *clp); extern void nfs4_schedule_stateid_recovery(const struct nfs_server *, struct nfs4_state *); extern void nfs41_handle_sequence_flag_errors(struct nfs_client *clp, u32 flags); extern void nfs41_handle_recall_slot(struct nfs_client *clp); diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 8c77039e7a8..4700fae1ada 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -3374,9 +3374,13 @@ static void nfs4_renew_done(struct rpc_task *task, void *calldata) if (task->tk_status < 0) { /* Unless we're shutting down, schedule state recovery! */ - if (test_bit(NFS_CS_RENEWD, &clp->cl_res_state) != 0) + if (test_bit(NFS_CS_RENEWD, &clp->cl_res_state) == 0) + return; + if (task->tk_status != NFS4ERR_CB_PATH_DOWN) { nfs4_schedule_lease_recovery(clp); - return; + return; + } + nfs4_schedule_path_down_recovery(clp); } do_renew_lease(clp, timestamp); } @@ -3386,7 +3390,7 @@ static const struct rpc_call_ops nfs4_renew_ops = { .rpc_release = nfs4_renew_release, }; -int nfs4_proc_async_renew(struct nfs_client *clp, struct rpc_cred *cred) +static int nfs4_proc_async_renew(struct nfs_client *clp, struct rpc_cred *cred, unsigned renew_flags) { struct rpc_message msg = { .rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_RENEW], @@ -3395,9 +3399,11 @@ int nfs4_proc_async_renew(struct nfs_client *clp, struct rpc_cred *cred) }; struct nfs4_renewdata *data; + if (renew_flags == 0) + return 0; if (!atomic_inc_not_zero(&clp->cl_count)) return -EIO; - data = kmalloc(sizeof(*data), GFP_KERNEL); + data = kmalloc(sizeof(*data), GFP_NOFS); if (data == NULL) return -ENOMEM; data->client = clp; @@ -3406,7 +3412,7 @@ int nfs4_proc_async_renew(struct nfs_client *clp, struct rpc_cred *cred) &nfs4_renew_ops, data); } -int nfs4_proc_renew(struct nfs_client *clp, struct rpc_cred *cred) +static int nfs4_proc_renew(struct nfs_client *clp, struct rpc_cred *cred) { struct rpc_message msg = { .rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_RENEW], @@ -5504,11 +5510,13 @@ static struct rpc_task *_nfs41_proc_sequence(struct nfs_client *clp, struct rpc_ return rpc_run_task(&task_setup_data); } -static int nfs41_proc_async_sequence(struct nfs_client *clp, struct rpc_cred *cred) +static int nfs41_proc_async_sequence(struct nfs_client *clp, struct rpc_cred *cred, unsigned renew_flags) { struct rpc_task *task; int ret = 0; + if ((renew_flags & NFS4_RENEW_TIMEOUT) == 0) + return 0; task = _nfs41_proc_sequence(clp, cred); if (IS_ERR(task)) ret = PTR_ERR(task); diff --git a/fs/nfs/nfs4renewd.c b/fs/nfs/nfs4renewd.c index df8e7f3ca56..dc484c0eae7 100644 --- a/fs/nfs/nfs4renewd.c +++ b/fs/nfs/nfs4renewd.c @@ -60,6 +60,7 @@ nfs4_renew_state(struct work_struct *work) struct rpc_cred *cred; long lease; unsigned long last, now; + unsigned renew_flags = 0; ops = clp->cl_mvops->state_renewal_ops; dprintk("%s: start\n", __func__); @@ -72,18 +73,23 @@ nfs4_renew_state(struct work_struct *work) last = clp->cl_last_renewal; now = jiffies; /* Are we close to a lease timeout? */ - if (time_after(now, last + lease/3)) { + if (time_after(now, last + lease/3)) + renew_flags |= NFS4_RENEW_TIMEOUT; + if (nfs_delegations_present(clp)) + renew_flags |= NFS4_RENEW_DELEGATION_CB; + + if (renew_flags != 0) { cred = ops->get_state_renewal_cred_locked(clp); spin_unlock(&clp->cl_lock); if (cred == NULL) { - if (!nfs_delegations_present(clp)) { + if (!(renew_flags & NFS4_RENEW_DELEGATION_CB)) { set_bit(NFS4CLNT_LEASE_EXPIRED, &clp->cl_state); goto out; } nfs_expire_all_delegations(clp); } else { /* Queue an asynchronous RENEW. */ - ops->sched_state_renewal(clp, cred); + ops->sched_state_renewal(clp, cred, renew_flags); put_rpccred(cred); goto out_exp; } diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index 72ab97ef3d6..39914be40b0 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -1038,6 +1038,12 @@ void nfs4_schedule_lease_recovery(struct nfs_client *clp) nfs4_schedule_state_manager(clp); } +void nfs4_schedule_path_down_recovery(struct nfs_client *clp) +{ + nfs_handle_cb_pathdown(clp); + nfs4_schedule_state_manager(clp); +} + static int nfs4_state_mark_reclaim_reboot(struct nfs_client *clp, struct nfs4_state *state) { diff --git a/fs/nfs/super.c b/fs/nfs/super.c index b961ceac66b..5b19b6aabe1 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -2035,9 +2035,6 @@ static inline void nfs_initialise_sb(struct super_block *sb) sb->s_blocksize = nfs_block_bits(server->wsize, &sb->s_blocksize_bits); - if (server->flags & NFS_MOUNT_NOAC) - sb->s_flags |= MS_SYNCHRONOUS; - sb->s_bdi = &server->backing_dev_info; nfs_super_set_maxbytes(sb, server->maxfilesize); @@ -2249,6 +2246,10 @@ static struct dentry *nfs_fs_mount(struct file_system_type *fs_type, if (server->flags & NFS_MOUNT_UNSHARED) compare_super = NULL; + /* -o noac implies -o sync */ + if (server->flags & NFS_MOUNT_NOAC) + sb_mntdata.mntflags |= MS_SYNCHRONOUS; + /* Get a superblock - note that we may end up sharing one that already exists */ s = sget(fs_type, compare_super, nfs_set_super, &sb_mntdata); if (IS_ERR(s)) { @@ -2361,6 +2362,10 @@ nfs_xdev_mount(struct file_system_type *fs_type, int flags, if (server->flags & NFS_MOUNT_UNSHARED) compare_super = NULL; + /* -o noac implies -o sync */ + if (server->flags & NFS_MOUNT_NOAC) + sb_mntdata.mntflags |= MS_SYNCHRONOUS; + /* Get a superblock - note that we may end up sharing one that already exists */ s = sget(&nfs_fs_type, compare_super, nfs_set_super, &sb_mntdata); if (IS_ERR(s)) { @@ -2628,6 +2633,10 @@ nfs4_remote_mount(struct file_system_type *fs_type, int flags, if (server->flags & NFS4_MOUNT_UNSHARED) compare_super = NULL; + /* -o noac implies -o sync */ + if (server->flags & NFS_MOUNT_NOAC) + sb_mntdata.mntflags |= MS_SYNCHRONOUS; + /* Get a superblock - note that we may end up sharing one that already exists */ s = sget(&nfs4_fs_type, compare_super, nfs_set_super, &sb_mntdata); if (IS_ERR(s)) { @@ -2789,7 +2798,7 @@ static struct dentry *nfs_follow_remote_path(struct vfsmount *root_mnt, goto out_put_mnt_ns; ret = vfs_path_lookup(root_mnt->mnt_root, root_mnt, - export_path, LOOKUP_FOLLOW, &path); + export_path, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, &path); nfs_referral_loop_unprotect(); put_mnt_ns(ns_private); @@ -2916,6 +2925,10 @@ nfs4_xdev_mount(struct file_system_type *fs_type, int flags, if (server->flags & NFS4_MOUNT_UNSHARED) compare_super = NULL; + /* -o noac implies -o sync */ + if (server->flags & NFS_MOUNT_NOAC) + sb_mntdata.mntflags |= MS_SYNCHRONOUS; + /* Get a superblock - note that we may end up sharing one that already exists */ s = sget(&nfs4_fs_type, compare_super, nfs_set_super, &sb_mntdata); if (IS_ERR(s)) { @@ -3003,6 +3016,10 @@ nfs4_remote_referral_mount(struct file_system_type *fs_type, int flags, if (server->flags & NFS4_MOUNT_UNSHARED) compare_super = NULL; + /* -o noac implies -o sync */ + if (server->flags & NFS_MOUNT_NOAC) + sb_mntdata.mntflags |= MS_SYNCHRONOUS; + /* Get a superblock - note that we may end up sharing one that already exists */ s = sget(&nfs4_fs_type, compare_super, nfs_set_super, &sb_mntdata); if (IS_ERR(s)) { diff --git a/fs/nfs/write.c b/fs/nfs/write.c index b39b37f8091..c9bd2a6b7d4 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -958,7 +958,7 @@ static int nfs_flush_multi(struct nfs_pageio_descriptor *desc, struct list_head if (!data) goto out_bad; data->pagevec[0] = page; - nfs_write_rpcsetup(req, data, wsize, offset, desc->pg_ioflags); + nfs_write_rpcsetup(req, data, len, offset, desc->pg_ioflags); list_add(&data->list, res); requests++; nbytes -= len; diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index 25b6a887adb..5afaa58a863 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -877,30 +877,54 @@ struct numa_maps_private { struct numa_maps md; }; -static void gather_stats(struct page *page, struct numa_maps *md, int pte_dirty) +static void gather_stats(struct page *page, struct numa_maps *md, int pte_dirty, + unsigned long nr_pages) { int count = page_mapcount(page); - md->pages++; + md->pages += nr_pages; if (pte_dirty || PageDirty(page)) - md->dirty++; + md->dirty += nr_pages; if (PageSwapCache(page)) - md->swapcache++; + md->swapcache += nr_pages; if (PageActive(page) || PageUnevictable(page)) - md->active++; + md->active += nr_pages; if (PageWriteback(page)) - md->writeback++; + md->writeback += nr_pages; if (PageAnon(page)) - md->anon++; + md->anon += nr_pages; if (count > md->mapcount_max) md->mapcount_max = count; - md->node[page_to_nid(page)]++; + md->node[page_to_nid(page)] += nr_pages; +} + +static struct page *can_gather_numa_stats(pte_t pte, struct vm_area_struct *vma, + unsigned long addr) +{ + struct page *page; + int nid; + + if (!pte_present(pte)) + return NULL; + + page = vm_normal_page(vma, addr, pte); + if (!page) + return NULL; + + if (PageReserved(page)) + return NULL; + + nid = page_to_nid(page); + if (!node_isset(nid, node_states[N_HIGH_MEMORY])) + return NULL; + + return page; } static int gather_pte_stats(pmd_t *pmd, unsigned long addr, @@ -912,26 +936,32 @@ static int gather_pte_stats(pmd_t *pmd, unsigned long addr, pte_t *pte; md = walk->private; - orig_pte = pte = pte_offset_map_lock(walk->mm, pmd, addr, &ptl); - do { - struct page *page; - int nid; + spin_lock(&walk->mm->page_table_lock); + if (pmd_trans_huge(*pmd)) { + if (pmd_trans_splitting(*pmd)) { + spin_unlock(&walk->mm->page_table_lock); + wait_split_huge_page(md->vma->anon_vma, pmd); + } else { + pte_t huge_pte = *(pte_t *)pmd; + struct page *page; - if (!pte_present(*pte)) - continue; + page = can_gather_numa_stats(huge_pte, md->vma, addr); + if (page) + gather_stats(page, md, pte_dirty(huge_pte), + HPAGE_PMD_SIZE/PAGE_SIZE); + spin_unlock(&walk->mm->page_table_lock); + return 0; + } + } else { + spin_unlock(&walk->mm->page_table_lock); + } - page = vm_normal_page(md->vma, addr, *pte); + orig_pte = pte = pte_offset_map_lock(walk->mm, pmd, addr, &ptl); + do { + struct page *page = can_gather_numa_stats(*pte, md->vma, addr); if (!page) continue; - - if (PageReserved(page)) - continue; - - nid = page_to_nid(page); - if (!node_isset(nid, node_states[N_HIGH_MEMORY])) - continue; - - gather_stats(page, md, pte_dirty(*pte)); + gather_stats(page, md, pte_dirty(*pte), 1); } while (pte++, addr += PAGE_SIZE, addr != end); pte_unmap_unlock(orig_pte, ptl); @@ -952,7 +982,7 @@ static int gather_hugetbl_stats(pte_t *pte, unsigned long hmask, return 0; md = walk->private; - gather_stats(page, md, pte_dirty(*pte)); + gather_stats(page, md, pte_dirty(*pte), 1); return 0; } diff --git a/fs/quota/quota.c b/fs/quota/quota.c index b34bdb25490..10b6be3ca28 100644 --- a/fs/quota/quota.c +++ b/fs/quota/quota.c @@ -355,7 +355,7 @@ SYSCALL_DEFINE4(quotactl, unsigned int, cmd, const char __user *, special, * resolution (think about autofs) and thus deadlocks could arise. */ if (cmds == Q_QUOTAON) { - ret = user_path_at(AT_FDCWD, addr, LOOKUP_FOLLOW, &path); + ret = user_path_at(AT_FDCWD, addr, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, &path); if (ret) pathp = ERR_PTR(ret); else diff --git a/fs/stat.c b/fs/stat.c index ba5316ffac6..78a3aa83c7e 100644 --- a/fs/stat.c +++ b/fs/stat.c @@ -81,8 +81,6 @@ int vfs_fstatat(int dfd, const char __user *filename, struct kstat *stat, if (!(flag & AT_SYMLINK_NOFOLLOW)) lookup_flags |= LOOKUP_FOLLOW; - if (flag & AT_NO_AUTOMOUNT) - lookup_flags |= LOOKUP_NO_AUTOMOUNT; if (flag & AT_EMPTY_PATH) lookup_flags |= LOOKUP_EMPTY; diff --git a/fs/ubifs/debug.h b/fs/ubifs/debug.h index 45174b53437..feb361e252a 100644 --- a/fs/ubifs/debug.h +++ b/fs/ubifs/debug.h @@ -335,9 +335,9 @@ void dbg_debugfs_exit_fs(struct ubifs_info *c); #define DBGKEY(key) ((char *)(key)) #define DBGKEY1(key) ((char *)(key)) -#define ubifs_dbg_msg(fmt, ...) do { \ - if (0) \ - pr_debug(fmt "\n", ##__VA_ARGS__); \ +#define ubifs_dbg_msg(fmt, ...) do { \ + if (0) \ + printk(KERN_DEBUG fmt "\n", ##__VA_ARGS__); \ } while (0) #define dbg_dump_stack() diff --git a/fs/xfs/Makefile b/fs/xfs/Makefile index 75bb316529d..427a4e82a58 100644 --- a/fs/xfs/Makefile +++ b/fs/xfs/Makefile @@ -16,44 +16,53 @@ # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA # -ccflags-y := -I$(src) -I$(src)/linux-2.6 -ccflags-$(CONFIG_XFS_DEBUG) += -g +ccflags-y += -I$(src) # needed for trace events -XFS_LINUX := linux-2.6 +ccflags-$(CONFIG_XFS_DEBUG) += -g obj-$(CONFIG_XFS_FS) += xfs.o -xfs-y += linux-2.6/xfs_trace.o - -xfs-$(CONFIG_XFS_QUOTA) += $(addprefix quota/, \ - xfs_dquot.o \ - xfs_dquot_item.o \ - xfs_trans_dquot.o \ - xfs_qm_syscalls.o \ - xfs_qm_bhv.o \ - xfs_qm.o) -xfs-$(CONFIG_XFS_QUOTA) += linux-2.6/xfs_quotaops.o - -ifeq ($(CONFIG_XFS_QUOTA),y) -xfs-$(CONFIG_PROC_FS) += quota/xfs_qm_stats.o -endif - -xfs-$(CONFIG_XFS_RT) += xfs_rtalloc.o -xfs-$(CONFIG_XFS_POSIX_ACL) += $(XFS_LINUX)/xfs_acl.o -xfs-$(CONFIG_PROC_FS) += $(XFS_LINUX)/xfs_stats.o -xfs-$(CONFIG_SYSCTL) += $(XFS_LINUX)/xfs_sysctl.o -xfs-$(CONFIG_COMPAT) += $(XFS_LINUX)/xfs_ioctl32.o +# this one should be compiled first, as the tracing macros can easily blow up +xfs-y += xfs_trace.o +# highlevel code +xfs-y += xfs_aops.o \ + xfs_bit.o \ + xfs_buf.o \ + xfs_dfrag.o \ + xfs_discard.o \ + xfs_error.o \ + xfs_export.o \ + xfs_file.o \ + xfs_filestream.o \ + xfs_fsops.o \ + xfs_fs_subr.o \ + xfs_globals.o \ + xfs_iget.o \ + xfs_ioctl.o \ + xfs_iomap.o \ + xfs_iops.o \ + xfs_itable.o \ + xfs_message.o \ + xfs_mru_cache.o \ + xfs_super.o \ + xfs_sync.o \ + xfs_xattr.o \ + xfs_rename.o \ + xfs_rw.o \ + xfs_utils.o \ + xfs_vnodeops.o \ + kmem.o \ + uuid.o +# code shared with libxfs xfs-y += xfs_alloc.o \ xfs_alloc_btree.o \ xfs_attr.o \ xfs_attr_leaf.o \ - xfs_bit.o \ xfs_bmap.o \ xfs_bmap_btree.o \ xfs_btree.o \ - xfs_buf_item.o \ xfs_da_btree.o \ xfs_dir2.o \ xfs_dir2_block.o \ @@ -61,49 +70,37 @@ xfs-y += xfs_alloc.o \ xfs_dir2_leaf.o \ xfs_dir2_node.o \ xfs_dir2_sf.o \ - xfs_error.o \ - xfs_extfree_item.o \ - xfs_filestream.o \ - xfs_fsops.o \ xfs_ialloc.o \ xfs_ialloc_btree.o \ - xfs_iget.o \ xfs_inode.o \ - xfs_inode_item.o \ - xfs_iomap.o \ - xfs_itable.o \ - xfs_dfrag.o \ - xfs_log.o \ - xfs_log_cil.o \ xfs_log_recover.o \ xfs_mount.o \ - xfs_mru_cache.o \ - xfs_rename.o \ - xfs_trans.o \ + xfs_trans.o + +# low-level transaction/log code +xfs-y += xfs_log.o \ + xfs_log_cil.o \ + xfs_buf_item.o \ + xfs_extfree_item.o \ + xfs_inode_item.o \ xfs_trans_ail.o \ xfs_trans_buf.o \ xfs_trans_extfree.o \ xfs_trans_inode.o \ - xfs_utils.o \ - xfs_vnodeops.o \ - xfs_rw.o - -# Objects in linux/ -xfs-y += $(addprefix $(XFS_LINUX)/, \ - kmem.o \ - xfs_aops.o \ - xfs_buf.o \ - xfs_discard.o \ - xfs_export.o \ - xfs_file.o \ - xfs_fs_subr.o \ - xfs_globals.o \ - xfs_ioctl.o \ - xfs_iops.o \ - xfs_message.o \ - xfs_super.o \ - xfs_sync.o \ - xfs_xattr.o) -# Objects in support/ -xfs-y += support/uuid.o +# optional features +xfs-$(CONFIG_XFS_QUOTA) += xfs_dquot.o \ + xfs_dquot_item.o \ + xfs_trans_dquot.o \ + xfs_qm_syscalls.o \ + xfs_qm_bhv.o \ + xfs_qm.o \ + xfs_quotaops.o +ifeq ($(CONFIG_XFS_QUOTA),y) +xfs-$(CONFIG_PROC_FS) += xfs_qm_stats.o +endif +xfs-$(CONFIG_XFS_RT) += xfs_rtalloc.o +xfs-$(CONFIG_XFS_POSIX_ACL) += xfs_acl.o +xfs-$(CONFIG_PROC_FS) += xfs_stats.o +xfs-$(CONFIG_SYSCTL) += xfs_sysctl.o +xfs-$(CONFIG_COMPAT) += xfs_ioctl32.o diff --git a/fs/xfs/linux-2.6/kmem.c b/fs/xfs/kmem.c index a907de565db..a907de565db 100644 --- a/fs/xfs/linux-2.6/kmem.c +++ b/fs/xfs/kmem.c diff --git a/fs/xfs/linux-2.6/kmem.h b/fs/xfs/kmem.h index f7c8f7a9ea6..f7c8f7a9ea6 100644 --- a/fs/xfs/linux-2.6/kmem.h +++ b/fs/xfs/kmem.h diff --git a/fs/xfs/linux-2.6/mrlock.h b/fs/xfs/mrlock.h index ff6a19873e5..ff6a19873e5 100644 --- a/fs/xfs/linux-2.6/mrlock.h +++ b/fs/xfs/mrlock.h diff --git a/fs/xfs/linux-2.6/time.h b/fs/xfs/time.h index 387e695a184..387e695a184 100644 --- a/fs/xfs/linux-2.6/time.h +++ b/fs/xfs/time.h diff --git a/fs/xfs/support/uuid.c b/fs/xfs/uuid.c index b83f76b6d41..b83f76b6d41 100644 --- a/fs/xfs/support/uuid.c +++ b/fs/xfs/uuid.c diff --git a/fs/xfs/support/uuid.h b/fs/xfs/uuid.h index 4732d71262c..4732d71262c 100644 --- a/fs/xfs/support/uuid.h +++ b/fs/xfs/uuid.h diff --git a/fs/xfs/xfs.h b/fs/xfs/xfs.h index 53ec3ea9a62..d8b11b7f94a 100644 --- a/fs/xfs/xfs.h +++ b/fs/xfs/xfs.h @@ -24,5 +24,6 @@ #define XFS_BUF_LOCK_TRACKING 1 #endif -#include <linux-2.6/xfs_linux.h> +#include "xfs_linux.h" + #endif /* __XFS_H__ */ diff --git a/fs/xfs/linux-2.6/xfs_acl.c b/fs/xfs/xfs_acl.c index b6c4b3795c4..b6c4b3795c4 100644 --- a/fs/xfs/linux-2.6/xfs_acl.c +++ b/fs/xfs/xfs_acl.c diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/xfs_aops.c index 63e971e2b83..8c37dde4c52 100644 --- a/fs/xfs/linux-2.6/xfs_aops.c +++ b/fs/xfs/xfs_aops.c @@ -1300,6 +1300,7 @@ xfs_end_io_direct_write( bool is_async) { struct xfs_ioend *ioend = iocb->private; + struct inode *inode = ioend->io_inode; /* * blockdev_direct_IO can return an error even after the I/O @@ -1331,7 +1332,7 @@ xfs_end_io_direct_write( } /* XXX: probably should move into the real I/O completion handler */ - inode_dio_done(ioend->io_inode); + inode_dio_done(inode); } STATIC ssize_t diff --git a/fs/xfs/linux-2.6/xfs_aops.h b/fs/xfs/xfs_aops.h index 71f721e1a71..71f721e1a71 100644 --- a/fs/xfs/linux-2.6/xfs_aops.h +++ b/fs/xfs/xfs_aops.h diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/xfs_buf.c index c57836dc778..c57836dc778 100644 --- a/fs/xfs/linux-2.6/xfs_buf.c +++ b/fs/xfs/xfs_buf.c diff --git a/fs/xfs/linux-2.6/xfs_buf.h b/fs/xfs/xfs_buf.h index 620972b8094..620972b8094 100644 --- a/fs/xfs/linux-2.6/xfs_buf.h +++ b/fs/xfs/xfs_buf.h diff --git a/fs/xfs/linux-2.6/xfs_discard.c b/fs/xfs/xfs_discard.c index 244e797dae3..244e797dae3 100644 --- a/fs/xfs/linux-2.6/xfs_discard.c +++ b/fs/xfs/xfs_discard.c diff --git a/fs/xfs/linux-2.6/xfs_discard.h b/fs/xfs/xfs_discard.h index 344879aea64..344879aea64 100644 --- a/fs/xfs/linux-2.6/xfs_discard.h +++ b/fs/xfs/xfs_discard.h diff --git a/fs/xfs/quota/xfs_dquot.c b/fs/xfs/xfs_dquot.c index db62959bed1..db62959bed1 100644 --- a/fs/xfs/quota/xfs_dquot.c +++ b/fs/xfs/xfs_dquot.c diff --git a/fs/xfs/quota/xfs_dquot.h b/fs/xfs/xfs_dquot.h index 34b7e945dbf..34b7e945dbf 100644 --- a/fs/xfs/quota/xfs_dquot.h +++ b/fs/xfs/xfs_dquot.h diff --git a/fs/xfs/quota/xfs_dquot_item.c b/fs/xfs/xfs_dquot_item.c index 9e0e2fa3f2c..9e0e2fa3f2c 100644 --- a/fs/xfs/quota/xfs_dquot_item.c +++ b/fs/xfs/xfs_dquot_item.c diff --git a/fs/xfs/quota/xfs_dquot_item.h b/fs/xfs/xfs_dquot_item.h index 5acae2ada70..5acae2ada70 100644 --- a/fs/xfs/quota/xfs_dquot_item.h +++ b/fs/xfs/xfs_dquot_item.h diff --git a/fs/xfs/linux-2.6/xfs_export.c b/fs/xfs/xfs_export.c index 75e5d322e48..75e5d322e48 100644 --- a/fs/xfs/linux-2.6/xfs_export.c +++ b/fs/xfs/xfs_export.c diff --git a/fs/xfs/linux-2.6/xfs_export.h b/fs/xfs/xfs_export.h index 3272b6ae7a3..3272b6ae7a3 100644 --- a/fs/xfs/linux-2.6/xfs_export.h +++ b/fs/xfs/xfs_export.h diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/xfs_file.c index 7f7b42469ea..7f7b42469ea 100644 --- a/fs/xfs/linux-2.6/xfs_file.c +++ b/fs/xfs/xfs_file.c diff --git a/fs/xfs/linux-2.6/xfs_fs_subr.c b/fs/xfs/xfs_fs_subr.c index ed88ed16811..ed88ed16811 100644 --- a/fs/xfs/linux-2.6/xfs_fs_subr.c +++ b/fs/xfs/xfs_fs_subr.c diff --git a/fs/xfs/linux-2.6/xfs_globals.c b/fs/xfs/xfs_globals.c index 76e81cff70b..76e81cff70b 100644 --- a/fs/xfs/linux-2.6/xfs_globals.c +++ b/fs/xfs/xfs_globals.c diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/xfs_ioctl.c index f7ce7debe14..f7ce7debe14 100644 --- a/fs/xfs/linux-2.6/xfs_ioctl.c +++ b/fs/xfs/xfs_ioctl.c diff --git a/fs/xfs/linux-2.6/xfs_ioctl.h b/fs/xfs/xfs_ioctl.h index d56173b34a2..d56173b34a2 100644 --- a/fs/xfs/linux-2.6/xfs_ioctl.h +++ b/fs/xfs/xfs_ioctl.h diff --git a/fs/xfs/linux-2.6/xfs_ioctl32.c b/fs/xfs/xfs_ioctl32.c index 54e623bfbb8..54e623bfbb8 100644 --- a/fs/xfs/linux-2.6/xfs_ioctl32.c +++ b/fs/xfs/xfs_ioctl32.c diff --git a/fs/xfs/linux-2.6/xfs_ioctl32.h b/fs/xfs/xfs_ioctl32.h index 80f4060e897..80f4060e897 100644 --- a/fs/xfs/linux-2.6/xfs_ioctl32.h +++ b/fs/xfs/xfs_ioctl32.h diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/xfs_iops.c index b9c172b3fbb..673704fab74 100644 --- a/fs/xfs/linux-2.6/xfs_iops.c +++ b/fs/xfs/xfs_iops.c @@ -70,9 +70,8 @@ xfs_synchronize_times( } /* - * If the linux inode is valid, mark it dirty. - * Used when committing a dirty inode into a transaction so that - * the inode will get written back by the linux code + * If the linux inode is valid, mark it dirty, else mark the dirty state + * in the XFS inode to make sure we pick it up when reclaiming the inode. */ void xfs_mark_inode_dirty_sync( @@ -82,6 +81,10 @@ xfs_mark_inode_dirty_sync( if (!(inode->i_state & (I_WILL_FREE|I_FREEING))) mark_inode_dirty_sync(inode); + else { + barrier(); + ip->i_update_core = 1; + } } void @@ -92,6 +95,11 @@ xfs_mark_inode_dirty( if (!(inode->i_state & (I_WILL_FREE|I_FREEING))) mark_inode_dirty(inode); + else { + barrier(); + ip->i_update_core = 1; + } + } /* diff --git a/fs/xfs/linux-2.6/xfs_iops.h b/fs/xfs/xfs_iops.h index ef41c92ce66..ef41c92ce66 100644 --- a/fs/xfs/linux-2.6/xfs_iops.h +++ b/fs/xfs/xfs_iops.h diff --git a/fs/xfs/linux-2.6/xfs_linux.h b/fs/xfs/xfs_linux.h index d42f814e4d3..1e8a45e74c3 100644 --- a/fs/xfs/linux-2.6/xfs_linux.h +++ b/fs/xfs/xfs_linux.h @@ -32,13 +32,12 @@ # define XFS_BIG_INUMS 0 #endif -#include <xfs_types.h> +#include "xfs_types.h" -#include <kmem.h> -#include <mrlock.h> -#include <time.h> - -#include <support/uuid.h> +#include "kmem.h" +#include "mrlock.h" +#include "time.h" +#include "uuid.h" #include <linux/semaphore.h> #include <linux/mm.h> @@ -78,14 +77,14 @@ #include <asm/byteorder.h> #include <asm/unaligned.h> -#include <xfs_vnode.h> -#include <xfs_stats.h> -#include <xfs_sysctl.h> -#include <xfs_iops.h> -#include <xfs_aops.h> -#include <xfs_super.h> -#include <xfs_buf.h> -#include <xfs_message.h> +#include "xfs_vnode.h" +#include "xfs_stats.h" +#include "xfs_sysctl.h" +#include "xfs_iops.h" +#include "xfs_aops.h" +#include "xfs_super.h" +#include "xfs_buf.h" +#include "xfs_message.h" #ifdef __BIG_ENDIAN #define XFS_NATIVE_HOST 1 diff --git a/fs/xfs/linux-2.6/xfs_message.c b/fs/xfs/xfs_message.c index bd672def95a..bd672def95a 100644 --- a/fs/xfs/linux-2.6/xfs_message.c +++ b/fs/xfs/xfs_message.c diff --git a/fs/xfs/linux-2.6/xfs_message.h b/fs/xfs/xfs_message.h index 7fb7ea00767..7fb7ea00767 100644 --- a/fs/xfs/linux-2.6/xfs_message.h +++ b/fs/xfs/xfs_message.h diff --git a/fs/xfs/quota/xfs_qm.c b/fs/xfs/xfs_qm.c index 9a0aa76facd..9a0aa76facd 100644 --- a/fs/xfs/quota/xfs_qm.c +++ b/fs/xfs/xfs_qm.c diff --git a/fs/xfs/quota/xfs_qm.h b/fs/xfs/xfs_qm.h index 43b9abe1052..43b9abe1052 100644 --- a/fs/xfs/quota/xfs_qm.h +++ b/fs/xfs/xfs_qm.h diff --git a/fs/xfs/quota/xfs_qm_bhv.c b/fs/xfs/xfs_qm_bhv.c index a0a829addca..a0a829addca 100644 --- a/fs/xfs/quota/xfs_qm_bhv.c +++ b/fs/xfs/xfs_qm_bhv.c diff --git a/fs/xfs/quota/xfs_qm_stats.c b/fs/xfs/xfs_qm_stats.c index 8671a0b3264..8671a0b3264 100644 --- a/fs/xfs/quota/xfs_qm_stats.c +++ b/fs/xfs/xfs_qm_stats.c diff --git a/fs/xfs/quota/xfs_qm_stats.h b/fs/xfs/xfs_qm_stats.h index 5b964fc0dc0..5b964fc0dc0 100644 --- a/fs/xfs/quota/xfs_qm_stats.h +++ b/fs/xfs/xfs_qm_stats.h diff --git a/fs/xfs/quota/xfs_qm_syscalls.c b/fs/xfs/xfs_qm_syscalls.c index 609246f42e6..609246f42e6 100644 --- a/fs/xfs/quota/xfs_qm_syscalls.c +++ b/fs/xfs/xfs_qm_syscalls.c diff --git a/fs/xfs/quota/xfs_quota_priv.h b/fs/xfs/xfs_quota_priv.h index 94a3d927d71..94a3d927d71 100644 --- a/fs/xfs/quota/xfs_quota_priv.h +++ b/fs/xfs/xfs_quota_priv.h diff --git a/fs/xfs/linux-2.6/xfs_quotaops.c b/fs/xfs/xfs_quotaops.c index 29b9d642e93..7e76f537abb 100644 --- a/fs/xfs/linux-2.6/xfs_quotaops.c +++ b/fs/xfs/xfs_quotaops.c @@ -25,7 +25,7 @@ #include "xfs_trans.h" #include "xfs_bmap_btree.h" #include "xfs_inode.h" -#include "quota/xfs_qm.h" +#include "xfs_qm.h" #include <linux/quota.h> diff --git a/fs/xfs/linux-2.6/xfs_stats.c b/fs/xfs/xfs_stats.c index 76fdc586193..76fdc586193 100644 --- a/fs/xfs/linux-2.6/xfs_stats.c +++ b/fs/xfs/xfs_stats.c diff --git a/fs/xfs/linux-2.6/xfs_stats.h b/fs/xfs/xfs_stats.h index 736854b1ca1..736854b1ca1 100644 --- a/fs/xfs/linux-2.6/xfs_stats.h +++ b/fs/xfs/xfs_stats.h diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/xfs_super.c index 9a72dda58bd..2366c54cc4f 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/xfs_super.c @@ -356,6 +356,8 @@ xfs_parseargs( mp->m_flags |= XFS_MOUNT_DELAYLOG; } else if (!strcmp(this_char, MNTOPT_NODELAYLOG)) { mp->m_flags &= ~XFS_MOUNT_DELAYLOG; + xfs_warn(mp, + "nodelaylog is deprecated and will be removed in Linux 3.3"); } else if (!strcmp(this_char, MNTOPT_DISCARD)) { mp->m_flags |= XFS_MOUNT_DISCARD; } else if (!strcmp(this_char, MNTOPT_NODISCARD)) { @@ -877,33 +879,17 @@ xfs_log_inode( struct xfs_trans *tp; int error; - xfs_iunlock(ip, XFS_ILOCK_SHARED); tp = xfs_trans_alloc(mp, XFS_TRANS_FSYNC_TS); error = xfs_trans_reserve(tp, 0, XFS_FSYNC_TS_LOG_RES(mp), 0, 0, 0); - if (error) { xfs_trans_cancel(tp, 0); - /* we need to return with the lock hold shared */ - xfs_ilock(ip, XFS_ILOCK_SHARED); return error; } xfs_ilock(ip, XFS_ILOCK_EXCL); - - /* - * Note - it's possible that we might have pushed ourselves out of the - * way during trans_reserve which would flush the inode. But there's - * no guarantee that the inode buffer has actually gone out yet (it's - * delwri). Plus the buffer could be pinned anyway if it's part of - * an inode in another recent transaction. So we play it safe and - * fire off the transaction anyway. - */ - xfs_trans_ijoin(tp, ip); + xfs_trans_ijoin_ref(tp, ip, XFS_ILOCK_EXCL); xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE); - error = xfs_trans_commit(tp, 0); - xfs_ilock_demote(ip, XFS_ILOCK_EXCL); - - return error; + return xfs_trans_commit(tp, 0); } STATIC int @@ -918,7 +904,9 @@ xfs_fs_write_inode( trace_xfs_write_inode(ip); if (XFS_FORCED_SHUTDOWN(mp)) - return XFS_ERROR(EIO); + return -XFS_ERROR(EIO); + if (!ip->i_update_core) + return 0; if (wbc->sync_mode == WB_SYNC_ALL) { /* @@ -929,12 +917,10 @@ xfs_fs_write_inode( * of synchronous log foces dramatically. */ xfs_ioend_wait(ip); - xfs_ilock(ip, XFS_ILOCK_SHARED); - if (ip->i_update_core) { - error = xfs_log_inode(ip); - if (error) - goto out_unlock; - } + error = xfs_log_inode(ip); + if (error) + goto out; + return 0; } else { /* * We make this non-blocking if the inode is contended, return diff --git a/fs/xfs/linux-2.6/xfs_super.h b/fs/xfs/xfs_super.h index 50a3266c999..50a3266c999 100644 --- a/fs/xfs/linux-2.6/xfs_super.h +++ b/fs/xfs/xfs_super.h diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/xfs_sync.c index 4604f90f86a..4604f90f86a 100644 --- a/fs/xfs/linux-2.6/xfs_sync.c +++ b/fs/xfs/xfs_sync.c diff --git a/fs/xfs/linux-2.6/xfs_sync.h b/fs/xfs/xfs_sync.h index 941202e7ac6..941202e7ac6 100644 --- a/fs/xfs/linux-2.6/xfs_sync.h +++ b/fs/xfs/xfs_sync.h diff --git a/fs/xfs/linux-2.6/xfs_sysctl.c b/fs/xfs/xfs_sysctl.c index ee2d2adaa43..ee2d2adaa43 100644 --- a/fs/xfs/linux-2.6/xfs_sysctl.c +++ b/fs/xfs/xfs_sysctl.c diff --git a/fs/xfs/linux-2.6/xfs_sysctl.h b/fs/xfs/xfs_sysctl.h index b9937d450f8..b9937d450f8 100644 --- a/fs/xfs/linux-2.6/xfs_sysctl.h +++ b/fs/xfs/xfs_sysctl.h diff --git a/fs/xfs/linux-2.6/xfs_trace.c b/fs/xfs/xfs_trace.c index 88d25d4aa56..9010ce885e6 100644 --- a/fs/xfs/linux-2.6/xfs_trace.c +++ b/fs/xfs/xfs_trace.c @@ -43,8 +43,8 @@ #include "xfs_quota.h" #include "xfs_iomap.h" #include "xfs_aops.h" -#include "quota/xfs_dquot_item.h" -#include "quota/xfs_dquot.h" +#include "xfs_dquot_item.h" +#include "xfs_dquot.h" #include "xfs_log_recover.h" #include "xfs_inode_item.h" diff --git a/fs/xfs/linux-2.6/xfs_trace.h b/fs/xfs/xfs_trace.h index 690fc7a7bd7..690fc7a7bd7 100644 --- a/fs/xfs/linux-2.6/xfs_trace.h +++ b/fs/xfs/xfs_trace.h diff --git a/fs/xfs/quota/xfs_trans_dquot.c b/fs/xfs/xfs_trans_dquot.c index 4d00ee67792..4d00ee67792 100644 --- a/fs/xfs/quota/xfs_trans_dquot.c +++ b/fs/xfs/xfs_trans_dquot.c diff --git a/fs/xfs/linux-2.6/xfs_vnode.h b/fs/xfs/xfs_vnode.h index 7c220b4227b..7c220b4227b 100644 --- a/fs/xfs/linux-2.6/xfs_vnode.h +++ b/fs/xfs/xfs_vnode.h diff --git a/fs/xfs/linux-2.6/xfs_xattr.c b/fs/xfs/xfs_xattr.c index 87d3e03878c..87d3e03878c 100644 --- a/fs/xfs/linux-2.6/xfs_xattr.c +++ b/fs/xfs/xfs_xattr.c diff --git a/include/asm-generic/unistd.h b/include/asm-generic/unistd.h index 4f76959397f..f4c38d8c667 100644 --- a/include/asm-generic/unistd.h +++ b/include/asm-generic/unistd.h @@ -143,7 +143,7 @@ __SYSCALL(__NR_pivot_root, sys_pivot_root) /* fs/nfsctl.c */ #define __NR_nfsservctl 42 -__SC_COMP(__NR_nfsservctl, sys_nfsservctl, compat_sys_nfsservctl) +__SYSCALL(__NR_nfsservctl, sys_ni_syscall) /* fs/open.c */ #define __NR3264_statfs 43 diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index e6e28f37d8e..a22662c9398 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -47,6 +47,9 @@ enum { * @muxval: a number usually used to poke into some mux regiser to * mux in the signal to this channel * @cctl_opt: default options for the channel control register + * @device_fc: Flow Controller Settings for ccfg register. Only valid for slave + * channels. Fill with 'true' if peripheral should be flow controller. Direction + * will be selected at Runtime. * @addr: source/target address in physical memory for this DMA channel, * can be the address of a FIFO register for burst requests for example. * This can be left undefined if the PrimeCell API is used for configuring @@ -65,6 +68,7 @@ struct pl08x_channel_data { int max_signal; u32 muxval; u32 cctl; + bool device_fc; dma_addr_t addr; bool circular_buffer; bool single; @@ -77,13 +81,11 @@ struct pl08x_channel_data { * @addr: current address * @maxwidth: the maximum width of a transfer on this bus * @buswidth: the width of this bus in bytes: 1, 2 or 4 - * @fill_bytes: bytes required to fill to the next bus memory boundary */ struct pl08x_bus_data { dma_addr_t addr; u8 maxwidth; u8 buswidth; - size_t fill_bytes; }; /** @@ -105,8 +107,16 @@ struct pl08x_phy_chan { /** * struct pl08x_txd - wrapper for struct dma_async_tx_descriptor + * @tx: async tx descriptor + * @node: node for txd list for channels + * @src_addr: src address of txd + * @dst_addr: dst address of txd + * @len: transfer len in bytes + * @direction: direction of transfer * @llis_bus: DMA memory address (physical) start for the LLIs * @llis_va: virtual memory address start for the LLIs + * @cctl: control reg values for current txd + * @ccfg: config reg values for current txd */ struct pl08x_txd { struct dma_async_tx_descriptor tx; diff --git a/include/linux/amba/pl330.h b/include/linux/amba/pl330.h index cbee7de7dd3..d12f077a6da 100644 --- a/include/linux/amba/pl330.h +++ b/include/linux/amba/pl330.h @@ -19,12 +19,8 @@ struct dma_pl330_peri { * Peri_Req i/f of the DMAC that is * peripheral could be reached from. */ - u8 peri_id; /* {0, 31} */ + u8 peri_id; /* specific dma id */ enum pl330_reqtype rqtype; - - /* For M->D and D->M Channels */ - int burst_sz; /* in power of 2 */ - dma_addr_t fifo_addr; }; struct dma_pl330_platdata { diff --git a/include/linux/basic_mmio_gpio.h b/include/linux/basic_mmio_gpio.h index 98999cf107c..feb91219674 100644 --- a/include/linux/basic_mmio_gpio.h +++ b/include/linux/basic_mmio_gpio.h @@ -63,15 +63,10 @@ static inline struct bgpio_chip *to_bgpio_chip(struct gpio_chip *gc) return container_of(gc, struct bgpio_chip, gc); } -int __devexit bgpio_remove(struct bgpio_chip *bgc); -int __devinit bgpio_init(struct bgpio_chip *bgc, - struct device *dev, - unsigned long sz, - void __iomem *dat, - void __iomem *set, - void __iomem *clr, - void __iomem *dirout, - void __iomem *dirin, - bool big_endian); +int bgpio_remove(struct bgpio_chip *bgc); +int bgpio_init(struct bgpio_chip *bgc, struct device *dev, + unsigned long sz, void __iomem *dat, void __iomem *set, + void __iomem *clr, void __iomem *dirout, void __iomem *dirin, + bool big_endian); #endif /* __BASIC_MMIO_GPIO_H */ diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h index 32f0076e844..71fc53bb8f1 100644 --- a/include/linux/blk_types.h +++ b/include/linux/blk_types.h @@ -124,6 +124,7 @@ enum rq_flag_bits { __REQ_SYNC, /* request is sync (sync write or read) */ __REQ_META, /* metadata io request */ + __REQ_PRIO, /* boost priority in cfq */ __REQ_DISCARD, /* request to discard sectors */ __REQ_SECURE, /* secure discard (used with __REQ_DISCARD) */ @@ -161,14 +162,15 @@ enum rq_flag_bits { #define REQ_FAILFAST_DRIVER (1 << __REQ_FAILFAST_DRIVER) #define REQ_SYNC (1 << __REQ_SYNC) #define REQ_META (1 << __REQ_META) +#define REQ_PRIO (1 << __REQ_PRIO) #define REQ_DISCARD (1 << __REQ_DISCARD) #define REQ_NOIDLE (1 << __REQ_NOIDLE) #define REQ_FAILFAST_MASK \ (REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER) #define REQ_COMMON_MASK \ - (REQ_WRITE | REQ_FAILFAST_MASK | REQ_SYNC | REQ_META | REQ_DISCARD | \ - REQ_NOIDLE | REQ_FLUSH | REQ_FUA | REQ_SECURE) + (REQ_WRITE | REQ_FAILFAST_MASK | REQ_SYNC | REQ_META | REQ_PRIO | \ + REQ_DISCARD | REQ_NOIDLE | REQ_FLUSH | REQ_FUA | REQ_SECURE) #define REQ_CLONE_MASK REQ_COMMON_MASK #define REQ_RAHEAD (1 << __REQ_RAHEAD) diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 84b15d54f8c..7fbaa910334 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -873,7 +873,6 @@ struct blk_plug { struct list_head list; struct list_head cb_list; unsigned int should_sort; - unsigned int count; }; #define BLK_MAX_REQUEST_COUNT 16 diff --git a/include/linux/compat.h b/include/linux/compat.h index 8779405e15a..c6e7523bf76 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -438,7 +438,6 @@ asmlinkage long compat_sys_ppoll(struct pollfd __user *ufds, struct compat_timespec __user *tsp, const compat_sigset_t __user *sigmask, compat_size_t sigsetsize); -asmlinkage long compat_sys_nfsservctl(int cmd, void *notused, void *notused2); asmlinkage long compat_sys_signalfd4(int ufd, const compat_sigset_t __user *sigmask, compat_size_t sigsetsize, int flags); diff --git a/include/linux/connector.h b/include/linux/connector.h index 0c69ad825b3..3c9c54fd569 100644 --- a/include/linux/connector.h +++ b/include/linux/connector.h @@ -1,7 +1,7 @@ /* * connector.h * - * 2004-2005 Copyright (c) Evgeniy Polyakov <johnpol@2ka.mipt.ru> + * 2004-2005 Copyright (c) Evgeniy Polyakov <zbr@ioremap.net> * All rights reserved. * * This program is free software; you can redistribute it and/or modify diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 8fbf40e0713..ace51af4369 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -24,8 +24,7 @@ #include <linux/device.h> #include <linux/uio.h> #include <linux/dma-direction.h> - -struct scatterlist; +#include <linux/scatterlist.h> /** * typedef dma_cookie_t - an opaque DMA cookie @@ -519,6 +518,16 @@ static inline int dmaengine_slave_config(struct dma_chan *chan, (unsigned long)config); } +static inline struct dma_async_tx_descriptor *dmaengine_prep_slave_single( + struct dma_chan *chan, void *buf, size_t len, + enum dma_data_direction dir, unsigned long flags) +{ + struct scatterlist sg; + sg_init_one(&sg, buf, len); + + return chan->device->device_prep_slave_sg(chan, &sg, 1, dir, flags); +} + static inline int dmaengine_terminate_all(struct dma_chan *chan) { return dmaengine_device_control(chan, DMA_TERMINATE_ALL, 0); diff --git a/include/linux/fs.h b/include/linux/fs.h index 178cdb4f1d4..277f497923a 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -162,10 +162,8 @@ struct inodes_stat_t { #define READA RWA_MASK #define READ_SYNC (READ | REQ_SYNC) -#define READ_META (READ | REQ_META) #define WRITE_SYNC (WRITE | REQ_SYNC | REQ_NOIDLE) #define WRITE_ODIRECT (WRITE | REQ_SYNC) -#define WRITE_META (WRITE | REQ_META) #define WRITE_FLUSH (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FLUSH) #define WRITE_FUA (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FUA) #define WRITE_FLUSH_FUA (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FLUSH | REQ_FUA) @@ -2318,6 +2316,11 @@ extern struct inode * iget5_locked(struct super_block *, unsigned long, int (*te extern struct inode * iget_locked(struct super_block *, unsigned long); extern int insert_inode_locked4(struct inode *, unsigned long, int (*test)(struct inode *, void *), void *); extern int insert_inode_locked(struct inode *); +#ifdef CONFIG_DEBUG_LOCK_ALLOC +extern void lockdep_annotate_inode_mutex_key(struct inode *inode); +#else +static inline void lockdep_annotate_inode_mutex_key(struct inode *inode) { }; +#endif extern void unlock_new_inode(struct inode *); extern unsigned int get_next_ino(void); diff --git a/include/linux/fuse.h b/include/linux/fuse.h index d464de53db4..464cff52686 100644 --- a/include/linux/fuse.h +++ b/include/linux/fuse.h @@ -47,6 +47,9 @@ * - FUSE_IOCTL_UNRESTRICTED shall now return with array of 'struct * fuse_ioctl_iovec' instead of ambiguous 'struct iovec' * - add FUSE_IOCTL_32BIT flag + * + * 7.17 + * - add FUSE_FLOCK_LOCKS and FUSE_RELEASE_FLOCK_UNLOCK */ #ifndef _LINUX_FUSE_H @@ -78,7 +81,7 @@ #define FUSE_KERNEL_VERSION 7 /** Minor version number of this interface */ -#define FUSE_KERNEL_MINOR_VERSION 16 +#define FUSE_KERNEL_MINOR_VERSION 17 /** The node ID of the root inode */ #define FUSE_ROOT_ID 1 @@ -153,8 +156,10 @@ struct fuse_file_lock { /** * INIT request/reply flags * + * FUSE_POSIX_LOCKS: remote locking for POSIX file locks * FUSE_EXPORT_SUPPORT: filesystem handles lookups of "." and ".." * FUSE_DONT_MASK: don't apply umask to file mode on create operations + * FUSE_FLOCK_LOCKS: remote locking for BSD style file locks */ #define FUSE_ASYNC_READ (1 << 0) #define FUSE_POSIX_LOCKS (1 << 1) @@ -163,6 +168,7 @@ struct fuse_file_lock { #define FUSE_EXPORT_SUPPORT (1 << 4) #define FUSE_BIG_WRITES (1 << 5) #define FUSE_DONT_MASK (1 << 6) +#define FUSE_FLOCK_LOCKS (1 << 10) /** * CUSE INIT request/reply flags @@ -175,6 +181,7 @@ struct fuse_file_lock { * Release flags */ #define FUSE_RELEASE_FLUSH (1 << 0) +#define FUSE_RELEASE_FLOCK_UNLOCK (1 << 1) /** * Getattr flags diff --git a/include/linux/kvm.h b/include/linux/kvm.h index 2c366b52f50..aace6b8691a 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -553,6 +553,7 @@ struct kvm_ppc_pvinfo { #define KVM_CAP_SPAPR_TCE 63 #define KVM_CAP_PPC_SMT 64 #define KVM_CAP_PPC_RMA 65 +#define KVM_CAP_S390_GMAP 71 #ifdef KVM_CAP_IRQ_ROUTING diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index 3b535db00a9..343bd7661f2 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -39,16 +39,6 @@ extern unsigned long mem_cgroup_isolate_pages(unsigned long nr_to_scan, struct mem_cgroup *mem_cont, int active, int file); -struct memcg_scanrecord { - struct mem_cgroup *mem; /* scanend memory cgroup */ - struct mem_cgroup *root; /* scan target hierarchy root */ - int context; /* scanning context (see memcontrol.c) */ - unsigned long nr_scanned[2]; /* the number of scanned pages */ - unsigned long nr_rotated[2]; /* the number of rotated pages */ - unsigned long nr_freed[2]; /* the number of freed pages */ - unsigned long elapsed; /* nsec of time elapsed while scanning */ -}; - #ifdef CONFIG_CGROUP_MEM_RES_CTLR /* * All "charge" functions with gfp_mask should use GFP_KERNEL or @@ -127,15 +117,6 @@ mem_cgroup_get_reclaim_stat_from_page(struct page *page); extern void mem_cgroup_print_oom_info(struct mem_cgroup *memcg, struct task_struct *p); -extern unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem, - gfp_t gfp_mask, bool noswap, - struct memcg_scanrecord *rec); -extern unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem, - gfp_t gfp_mask, bool noswap, - struct zone *zone, - struct memcg_scanrecord *rec, - unsigned long *nr_scanned); - #ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP extern int do_swap_account; #endif diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h index d12f8d635a8..97cf4f27d64 100644 --- a/include/linux/mfd/wm8994/pdata.h +++ b/include/linux/mfd/wm8994/pdata.h @@ -26,7 +26,7 @@ struct wm8994_ldo_pdata { struct regulator_init_data *init_data; }; -#define WM8994_CONFIGURE_GPIO 0x8000 +#define WM8994_CONFIGURE_GPIO 0x10000 #define WM8994_DRC_REGS 5 #define WM8994_EQ_REGS 20 diff --git a/include/linux/namei.h b/include/linux/namei.h index 76fe2c62ae7..409328d1cbb 100644 --- a/include/linux/namei.h +++ b/include/linux/namei.h @@ -48,11 +48,12 @@ enum {LAST_NORM, LAST_ROOT, LAST_DOT, LAST_DOTDOT, LAST_BIND}; */ #define LOOKUP_FOLLOW 0x0001 #define LOOKUP_DIRECTORY 0x0002 +#define LOOKUP_AUTOMOUNT 0x0004 #define LOOKUP_PARENT 0x0010 #define LOOKUP_REVAL 0x0020 #define LOOKUP_RCU 0x0040 -#define LOOKUP_NO_AUTOMOUNT 0x0080 + /* * Intent data */ diff --git a/include/linux/of.h b/include/linux/of.h index 9180dc5cb00..5dfe2d5a8b5 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -203,6 +203,11 @@ extern int of_property_read_u32_array(const struct device_node *np, extern int of_property_read_string(struct device_node *np, const char *propname, const char **out_string); +extern int of_property_read_string_index(struct device_node *np, + const char *propname, + int index, const char **output); +extern int of_property_count_strings(struct device_node *np, + const char *propname); extern int of_device_is_compatible(const struct device_node *device, const char *); extern int of_device_is_available(const struct device_node *device); @@ -256,6 +261,19 @@ static inline int of_property_read_string(struct device_node *np, return -ENOSYS; } +static inline int of_property_read_string_index(struct device_node *np, + const char *propname, int index, + const char **out_string) +{ + return -ENOSYS; +} + +static inline int of_property_count_strings(struct device_node *np, + const char *propname) +{ + return -ENOSYS; +} + static inline const void *of_get_property(const struct device_node *node, const char *name, int *lenp) diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 245bafdafd5..c816075c01c 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -944,8 +944,10 @@ extern void perf_pmu_unregister(struct pmu *pmu); extern int perf_num_counters(void); extern const char *perf_pmu_name(void); -extern void __perf_event_task_sched_in(struct task_struct *task); -extern void __perf_event_task_sched_out(struct task_struct *task, struct task_struct *next); +extern void __perf_event_task_sched_in(struct task_struct *prev, + struct task_struct *task); +extern void __perf_event_task_sched_out(struct task_struct *prev, + struct task_struct *next); extern int perf_event_init_task(struct task_struct *child); extern void perf_event_exit_task(struct task_struct *child); extern void perf_event_free_task(struct task_struct *task); @@ -1059,17 +1061,20 @@ perf_sw_event(u32 event_id, u64 nr, struct pt_regs *regs, u64 addr) extern struct jump_label_key perf_sched_events; -static inline void perf_event_task_sched_in(struct task_struct *task) +static inline void perf_event_task_sched_in(struct task_struct *prev, + struct task_struct *task) { if (static_branch(&perf_sched_events)) - __perf_event_task_sched_in(task); + __perf_event_task_sched_in(prev, task); } -static inline void perf_event_task_sched_out(struct task_struct *task, struct task_struct *next) +static inline void perf_event_task_sched_out(struct task_struct *prev, + struct task_struct *next) { perf_sw_event(PERF_COUNT_SW_CONTEXT_SWITCHES, 1, NULL, 0); - __perf_event_task_sched_out(task, next); + if (static_branch(&perf_sched_events)) + __perf_event_task_sched_out(prev, next); } extern void perf_event_mmap(struct vm_area_struct *vma); @@ -1139,10 +1144,11 @@ extern void perf_event_disable(struct perf_event *event); extern void perf_event_task_tick(void); #else static inline void -perf_event_task_sched_in(struct task_struct *task) { } +perf_event_task_sched_in(struct task_struct *prev, + struct task_struct *task) { } static inline void -perf_event_task_sched_out(struct task_struct *task, - struct task_struct *next) { } +perf_event_task_sched_out(struct task_struct *prev, + struct task_struct *next) { } static inline int perf_event_init_task(struct task_struct *child) { return 0; } static inline void perf_event_exit_task(struct task_struct *child) { } static inline void perf_event_free_task(struct task_struct *task) { } diff --git a/include/linux/personality.h b/include/linux/personality.h index eec3bae164d..8fc7dd1a57f 100644 --- a/include/linux/personality.h +++ b/include/linux/personality.h @@ -22,6 +22,7 @@ extern int __set_personality(unsigned int); * These occupy the top three bytes. */ enum { + UNAME26 = 0x0020000, ADDR_NO_RANDOMIZE = 0x0040000, /* disable randomization of VA space */ FDPIC_FUNCPTRS = 0x0080000, /* userspace function ptrs point to descriptors * (signal handling) diff --git a/include/linux/pwm_backlight.h b/include/linux/pwm_backlight.h index 5e3e25a3c9c..63d2df43e61 100644 --- a/include/linux/pwm_backlight.h +++ b/include/linux/pwm_backlight.h @@ -14,6 +14,7 @@ struct platform_pwm_backlight_data { unsigned int pwm_period_ns; int (*init)(struct device *dev); int (*notify)(struct device *dev, int brightness); + void (*notify_after)(struct device *dev, int brightness); void (*exit)(struct device *dev); int (*check_fb)(struct device *dev, struct fb_info *info); }; diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index 26f6ea4444e..b47771aa571 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -123,7 +123,7 @@ struct regulator_bulk_data { const char *supply; struct regulator *consumer; - /* Internal use */ + /* private: Internal use */ int ret; }; diff --git a/include/linux/rio_regs.h b/include/linux/rio_regs.h index 9026b30238f..218168a2b5e 100644 --- a/include/linux/rio_regs.h +++ b/include/linux/rio_regs.h @@ -36,12 +36,12 @@ #define RIO_PEF_PROCESSOR 0x20000000 /* [I] Processor */ #define RIO_PEF_SWITCH 0x10000000 /* [I] Switch */ #define RIO_PEF_MULTIPORT 0x08000000 /* [VI, 2.1] Multiport */ -#define RIO_PEF_INB_MBOX 0x00f00000 /* [II] Mailboxes */ -#define RIO_PEF_INB_MBOX0 0x00800000 /* [II] Mailbox 0 */ -#define RIO_PEF_INB_MBOX1 0x00400000 /* [II] Mailbox 1 */ -#define RIO_PEF_INB_MBOX2 0x00200000 /* [II] Mailbox 2 */ -#define RIO_PEF_INB_MBOX3 0x00100000 /* [II] Mailbox 3 */ -#define RIO_PEF_INB_DOORBELL 0x00080000 /* [II] Doorbells */ +#define RIO_PEF_INB_MBOX 0x00f00000 /* [II, <= 1.2] Mailboxes */ +#define RIO_PEF_INB_MBOX0 0x00800000 /* [II, <= 1.2] Mailbox 0 */ +#define RIO_PEF_INB_MBOX1 0x00400000 /* [II, <= 1.2] Mailbox 1 */ +#define RIO_PEF_INB_MBOX2 0x00200000 /* [II, <= 1.2] Mailbox 2 */ +#define RIO_PEF_INB_MBOX3 0x00100000 /* [II, <= 1.2] Mailbox 3 */ +#define RIO_PEF_INB_DOORBELL 0x00080000 /* [II, <= 1.2] Doorbells */ #define RIO_PEF_EXT_RT 0x00000200 /* [III, 1.3] Extended route table support */ #define RIO_PEF_STD_RT 0x00000100 /* [III, 1.3] Standard route table support */ #define RIO_PEF_CTLS 0x00000010 /* [III] CTLS */ @@ -102,7 +102,7 @@ #define RIO_SWITCH_RT_LIMIT 0x34 /* [III, 1.3] Switch Route Table Destination ID Limit CAR */ #define RIO_RT_MAX_DESTID 0x0000ffff -#define RIO_MBOX_CSR 0x40 /* [II] Mailbox CSR */ +#define RIO_MBOX_CSR 0x40 /* [II, <= 1.2] Mailbox CSR */ #define RIO_MBOX0_AVAIL 0x80000000 /* [II] Mbox 0 avail */ #define RIO_MBOX0_FULL 0x40000000 /* [II] Mbox 0 full */ #define RIO_MBOX0_EMPTY 0x20000000 /* [II] Mbox 0 empty */ @@ -128,8 +128,8 @@ #define RIO_MBOX3_FAIL 0x00000008 /* [II] Mbox 3 fail */ #define RIO_MBOX3_ERROR 0x00000004 /* [II] Mbox 3 error */ -#define RIO_WRITE_PORT_CSR 0x44 /* [I] Write Port CSR */ -#define RIO_DOORBELL_CSR 0x44 /* [II] Doorbell CSR */ +#define RIO_WRITE_PORT_CSR 0x44 /* [I, <= 1.2] Write Port CSR */ +#define RIO_DOORBELL_CSR 0x44 /* [II, <= 1.2] Doorbell CSR */ #define RIO_DOORBELL_AVAIL 0x80000000 /* [II] Doorbell avail */ #define RIO_DOORBELL_FULL 0x40000000 /* [II] Doorbell full */ #define RIO_DOORBELL_EMPTY 0x20000000 /* [II] Doorbell empty */ diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 7b996ed86d5..8bd383caa36 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -524,6 +524,7 @@ static inline struct sk_buff *alloc_skb_fclone(unsigned int size, extern bool skb_recycle_check(struct sk_buff *skb, int skb_size); extern struct sk_buff *skb_morph(struct sk_buff *dst, struct sk_buff *src); +extern int skb_copy_ubufs(struct sk_buff *skb, gfp_t gfp_mask); extern struct sk_buff *skb_clone(struct sk_buff *skb, gfp_t priority); extern struct sk_buff *skb_copy(const struct sk_buff *skb, diff --git a/include/linux/snmp.h b/include/linux/snmp.h index 12b2b18e50c..e16557a357e 100644 --- a/include/linux/snmp.h +++ b/include/linux/snmp.h @@ -231,6 +231,8 @@ enum LINUX_MIB_TCPDEFERACCEPTDROP, LINUX_MIB_IPRPFILTER, /* IP Reverse Path Filter (rp_filter) */ LINUX_MIB_TCPTIMEWAITOVERFLOW, /* TCPTimeWaitOverflow */ + LINUX_MIB_TCPREQQFULLDOCOOKIES, /* TCPReqQFullDoCookies */ + LINUX_MIB_TCPREQQFULLDROP, /* TCPReqQFullDrop */ __LINUX_MIB_MAX }; diff --git a/include/linux/swap.h b/include/linux/swap.h index 14d62490922..c71f84bb62e 100644 --- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -252,6 +252,12 @@ static inline void lru_cache_add_file(struct page *page) extern unsigned long try_to_free_pages(struct zonelist *zonelist, int order, gfp_t gfp_mask, nodemask_t *mask); extern int __isolate_lru_page(struct page *page, int mode, int file); +extern unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem, + gfp_t gfp_mask, bool noswap); +extern unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem, + gfp_t gfp_mask, bool noswap, + struct zone *zone, + unsigned long *nr_scanned); extern unsigned long shrink_all_memory(unsigned long nr_pages); extern int vm_swappiness; extern int remove_mapping(struct address_space *mapping, struct page *page); diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 8c03b98df5f..1ff0ec2a5e8 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -702,9 +702,6 @@ asmlinkage long sys_sysctl(struct __sysctl_args __user *args); asmlinkage long sys_sysinfo(struct sysinfo __user *info); asmlinkage long sys_sysfs(int option, unsigned long arg1, unsigned long arg2); -asmlinkage long sys_nfsservctl(int cmd, - struct nfsctl_arg __user *arg, - void __user *res); asmlinkage long sys_syslog(int type, char __user *buf, int len); asmlinkage long sys_uselib(const char __user *library); asmlinkage long sys_ni_syscall(void); diff --git a/include/linux/ti_wilink_st.h b/include/linux/ti_wilink_st.h index b004e557caa..2ef4385da6b 100644 --- a/include/linux/ti_wilink_st.h +++ b/include/linux/ti_wilink_st.h @@ -410,7 +410,28 @@ struct gps_event_hdr { u16 plen; } __attribute__ ((packed)); -/* platform data */ +/** + * struct ti_st_plat_data - platform data shared between ST driver and + * platform specific board file which adds the ST device. + * @nshutdown_gpio: Host's GPIO line to which chip's BT_EN is connected. + * @dev_name: The UART/TTY name to which chip is interfaced. (eg: /dev/ttyS1) + * @flow_cntrl: Should always be 1, since UART's CTS/RTS is used for PM + * purposes. + * @baud_rate: The baud rate supported by the Host UART controller, this will + * be shared across with the chip via a HCI VS command from User-Space Init + * Mgr application. + * @suspend: + * @resume: legacy PM routines hooked to platform specific board file, so as + * to take chip-host interface specific action. + * @chip_enable: + * @chip_disable: Platform/Interface specific mux mode setting, GPIO + * configuring, Host side PM disabling etc.. can be done here. + * @chip_asleep: + * @chip_awake: Chip specific deep sleep states is communicated to Host + * specific board-xx.c to take actions such as cut UART clocks when chip + * asleep or run host faster when chip awake etc.. + * + */ struct ti_st_plat_data { long nshutdown_gpio; unsigned char dev_name[UART_DEV_NAME_LEN]; /* uart name */ @@ -418,6 +439,10 @@ struct ti_st_plat_data { unsigned long baud_rate; int (*suspend)(struct platform_device *, pm_message_t); int (*resume)(struct platform_device *); + int (*chip_enable) (struct kim_data_s *); + int (*chip_disable) (struct kim_data_s *); + int (*chip_asleep) (struct kim_data_s *); + int (*chip_awake) (struct kim_data_s *); }; #endif /* TI_WILINK_ST_H */ diff --git a/include/linux/tty.h b/include/linux/tty.h index 44bc0c5617e..5f2ede82b3d 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -421,6 +421,8 @@ extern void tty_driver_flush_buffer(struct tty_struct *tty); extern void tty_throttle(struct tty_struct *tty); extern void tty_unthrottle(struct tty_struct *tty); extern int tty_do_resize(struct tty_struct *tty, struct winsize *ws); +extern void tty_driver_remove_tty(struct tty_driver *driver, + struct tty_struct *tty); extern void tty_shutdown(struct tty_struct *tty); extern void tty_free_termios(struct tty_struct *tty); extern int is_current_pgrp_orphaned(void); diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h index 9deeac85524..ecdaeb98b29 100644 --- a/include/linux/tty_driver.h +++ b/include/linux/tty_driver.h @@ -47,6 +47,9 @@ * * This routine is called synchronously when a particular tty device * is closed for the last time freeing up the resources. + * Note that tty_shutdown() is not called if ops->shutdown is defined. + * This means one is responsible to take care of calling ops->remove (e.g. + * via tty_driver_remove_tty) and releasing tty->termios. * * * void (*cleanup)(struct tty_struct * tty); diff --git a/include/linux/writeback.h b/include/linux/writeback.h index f1bfa12ea24..2b8963ff0f3 100644 --- a/include/linux/writeback.h +++ b/include/linux/writeback.h @@ -12,15 +12,6 @@ * * (thresh - thresh/DIRTY_FULL_SCOPE, thresh) * - * The 1/16 region above the global dirty limit will be put to maximum pauses: - * - * (limit, limit + limit/DIRTY_MAXPAUSE_AREA) - * - * The 1/16 region above the max-pause region, dirty exceeded bdi's will be put - * to loops: - * - * (limit + limit/DIRTY_MAXPAUSE_AREA, limit + limit/DIRTY_PASSGOOD_AREA) - * * Further beyond, all dirtier tasks will enter a loop waiting (possibly long * time) for the dirty pages to drop, unless written enough pages. * @@ -31,8 +22,6 @@ */ #define DIRTY_SCOPE 8 #define DIRTY_FULL_SCOPE (DIRTY_SCOPE / 2) -#define DIRTY_MAXPAUSE_AREA 16 -#define DIRTY_PASSGOOD_AREA 8 /* * 4MB minimal write chunk size diff --git a/include/net/9p/9p.h b/include/net/9p/9p.h index 342dcf13d03..a6326ef8ade 100644 --- a/include/net/9p/9p.h +++ b/include/net/9p/9p.h @@ -288,6 +288,35 @@ enum p9_perm_t { P9_DMSETVTX = 0x00010000, }; +/* 9p2000.L open flags */ +#define P9_DOTL_RDONLY 00000000 +#define P9_DOTL_WRONLY 00000001 +#define P9_DOTL_RDWR 00000002 +#define P9_DOTL_NOACCESS 00000003 +#define P9_DOTL_CREATE 00000100 +#define P9_DOTL_EXCL 00000200 +#define P9_DOTL_NOCTTY 00000400 +#define P9_DOTL_TRUNC 00001000 +#define P9_DOTL_APPEND 00002000 +#define P9_DOTL_NONBLOCK 00004000 +#define P9_DOTL_DSYNC 00010000 +#define P9_DOTL_FASYNC 00020000 +#define P9_DOTL_DIRECT 00040000 +#define P9_DOTL_LARGEFILE 00100000 +#define P9_DOTL_DIRECTORY 00200000 +#define P9_DOTL_NOFOLLOW 00400000 +#define P9_DOTL_NOATIME 01000000 +#define P9_DOTL_CLOEXEC 02000000 +#define P9_DOTL_SYNC 04000000 + +/* 9p2000.L at flags */ +#define P9_DOTL_AT_REMOVEDIR 0x200 + +/* 9p2000.L lock type */ +#define P9_LOCK_TYPE_RDLCK 0 +#define P9_LOCK_TYPE_WRLCK 1 +#define P9_LOCK_TYPE_UNLCK 2 + /** * enum p9_qid_t - QID types * @P9_QTDIR: directory diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index d17f47fc9e3..401d73bd151 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1744,6 +1744,8 @@ struct wiphy_wowlan_support { * by default for perm_addr. In this case, the mask should be set to * all-zeroes. In this case it is assumed that the device can handle * the same number of arbitrary MAC addresses. + * @registered: protects ->resume and ->suspend sysfs callbacks against + * unregister hardware * @debugfsdir: debugfs directory used for this wiphy, will be renamed * automatically on wiphy renames * @dev: (virtual) struct device for this wiphy @@ -1865,6 +1867,9 @@ struct wiphy { * you need use set_wiphy_dev() (see below) */ struct device dev; + /* protects ->resume, ->suspend sysfs callbacks against unregister hw */ + bool registered; + /* dir in debugfs: ieee80211/<wiphyname> */ struct dentry *debugfsdir; diff --git a/include/net/flow.h b/include/net/flow.h index 78113daadd6..a09447749e2 100644 --- a/include/net/flow.h +++ b/include/net/flow.h @@ -7,6 +7,7 @@ #ifndef _NET_FLOW_H #define _NET_FLOW_H +#include <linux/socket.h> #include <linux/in6.h> #include <linux/atomic.h> @@ -68,7 +69,7 @@ struct flowi4 { #define fl4_ipsec_spi uli.spi #define fl4_mh_type uli.mht.type #define fl4_gre_key uli.gre_key -}; +} __attribute__((__aligned__(BITS_PER_LONG/8))); static inline void flowi4_init_output(struct flowi4 *fl4, int oif, __u32 mark, __u8 tos, __u8 scope, @@ -112,7 +113,7 @@ struct flowi6 { #define fl6_ipsec_spi uli.spi #define fl6_mh_type uli.mht.type #define fl6_gre_key uli.gre_key -}; +} __attribute__((__aligned__(BITS_PER_LONG/8))); struct flowidn { struct flowi_common __fl_common; @@ -127,7 +128,7 @@ struct flowidn { union flowi_uli uli; #define fld_sport uli.ports.sport #define fld_dport uli.ports.dport -}; +} __attribute__((__aligned__(BITS_PER_LONG/8))); struct flowi { union { @@ -161,6 +162,24 @@ static inline struct flowi *flowidn_to_flowi(struct flowidn *fldn) return container_of(fldn, struct flowi, u.dn); } +typedef unsigned long flow_compare_t; + +static inline size_t flow_key_size(u16 family) +{ + switch (family) { + case AF_INET: + BUILD_BUG_ON(sizeof(struct flowi4) % sizeof(flow_compare_t)); + return sizeof(struct flowi4) / sizeof(flow_compare_t); + case AF_INET6: + BUILD_BUG_ON(sizeof(struct flowi6) % sizeof(flow_compare_t)); + return sizeof(struct flowi6) / sizeof(flow_compare_t); + case AF_DECnet: + BUILD_BUG_ON(sizeof(struct flowidn) % sizeof(flow_compare_t)); + return sizeof(struct flowidn) / sizeof(flow_compare_t); + } + return 0; +} + #define FLOW_DIR_IN 0 #define FLOW_DIR_OUT 1 #define FLOW_DIR_FWD 2 diff --git a/include/net/request_sock.h b/include/net/request_sock.h index 99e6e19b57c..4c0766e201e 100644 --- a/include/net/request_sock.h +++ b/include/net/request_sock.h @@ -96,7 +96,8 @@ extern int sysctl_max_syn_backlog; */ struct listen_sock { u8 max_qlen_log; - /* 3 bytes hole, try to use */ + u8 synflood_warned; + /* 2 bytes hole, try to use */ int qlen; int qlen_young; int clock_hand; diff --git a/include/net/sctp/command.h b/include/net/sctp/command.h index 6506458ccd3..712b3bebeda 100644 --- a/include/net/sctp/command.h +++ b/include/net/sctp/command.h @@ -109,6 +109,7 @@ typedef enum { SCTP_CMD_SEND_MSG, /* Send the whole use message */ SCTP_CMD_SEND_NEXT_ASCONF, /* Send the next ASCONF after ACK */ SCTP_CMD_PURGE_ASCONF_QUEUE, /* Purge all asconf queues.*/ + SCTP_CMD_SET_ASOC, /* Restore association context */ SCTP_CMD_LAST } sctp_verb_t; diff --git a/include/net/tcp.h b/include/net/tcp.h index 149a415d1e0..acc620a4a45 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -431,17 +431,34 @@ extern int tcp_disconnect(struct sock *sk, int flags); extern __u32 syncookie_secret[2][16-4+SHA_DIGEST_WORDS]; extern struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb, struct ip_options *opt); +#ifdef CONFIG_SYN_COOKIES extern __u32 cookie_v4_init_sequence(struct sock *sk, struct sk_buff *skb, __u16 *mss); +#else +static inline __u32 cookie_v4_init_sequence(struct sock *sk, + struct sk_buff *skb, + __u16 *mss) +{ + return 0; +} +#endif extern __u32 cookie_init_timestamp(struct request_sock *req); extern bool cookie_check_timestamp(struct tcp_options_received *opt, bool *); /* From net/ipv6/syncookies.c */ extern struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb); +#ifdef CONFIG_SYN_COOKIES extern __u32 cookie_v6_init_sequence(struct sock *sk, struct sk_buff *skb, __u16 *mss); - +#else +static inline __u32 cookie_v6_init_sequence(struct sock *sk, + struct sk_buff *skb, + __u16 *mss) +{ + return 0; +} +#endif /* tcp_output.c */ extern void __tcp_push_pending_frames(struct sock *sk, unsigned int cur_mss, @@ -460,6 +477,9 @@ extern int tcp_write_wakeup(struct sock *); extern void tcp_send_fin(struct sock *sk); extern void tcp_send_active_reset(struct sock *sk, gfp_t priority); extern int tcp_send_synack(struct sock *); +extern int tcp_syn_flood_action(struct sock *sk, + const struct sk_buff *skb, + const char *proto); extern void tcp_push_one(struct sock *, unsigned int mss_now); extern void tcp_send_ack(struct sock *sk); extern void tcp_send_delayed_ack(struct sock *sk); diff --git a/include/net/transp_v6.h b/include/net/transp_v6.h index 5271a741c3a..498433dd067 100644 --- a/include/net/transp_v6.h +++ b/include/net/transp_v6.h @@ -39,6 +39,7 @@ extern int datagram_recv_ctl(struct sock *sk, struct sk_buff *skb); extern int datagram_send_ctl(struct net *net, + struct sock *sk, struct msghdr *msg, struct flowi6 *fl6, struct ipv6_txoptions *opt, diff --git a/include/target/target_core_fabric_ops.h b/include/target/target_core_fabric_ops.h index 2de8fe90759..126c675f4f1 100644 --- a/include/target/target_core_fabric_ops.h +++ b/include/target/target_core_fabric_ops.h @@ -27,6 +27,12 @@ struct target_core_fabric_ops { int (*tpg_check_demo_mode_cache)(struct se_portal_group *); int (*tpg_check_demo_mode_write_protect)(struct se_portal_group *); int (*tpg_check_prod_mode_write_protect)(struct se_portal_group *); + /* + * Optionally used by fabrics to allow demo-mode login, but not + * expose any TPG LUNs, and return 'not connected' in standard + * inquiry response + */ + int (*tpg_check_demo_mode_login_only)(struct se_portal_group *); struct se_node_acl *(*tpg_alloc_fabric_acl)( struct se_portal_group *); void (*tpg_release_fabric_acl)(struct se_portal_group *, diff --git a/init/main.c b/init/main.c index 9c51ee7adf3..2a9b88aa5e7 100644 --- a/init/main.c +++ b/init/main.c @@ -209,8 +209,19 @@ early_param("quiet", quiet_kernel); static int __init loglevel(char *str) { - get_option(&str, &console_loglevel); - return 0; + int newlevel; + + /* + * Only update loglevel value when a correct setting was passed, + * to prevent blind crashes (when loglevel being set to 0) that + * are quite hard to debug + */ + if (get_option(&str, &newlevel)) { + console_loglevel = newlevel; + return 0; + } + + return -EINVAL; } early_param("loglevel", loglevel); diff --git a/kernel/events/core.c b/kernel/events/core.c index b8785e26ee1..0f857782d06 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -399,14 +399,54 @@ void perf_cgroup_switch(struct task_struct *task, int mode) local_irq_restore(flags); } -static inline void perf_cgroup_sched_out(struct task_struct *task) +static inline void perf_cgroup_sched_out(struct task_struct *task, + struct task_struct *next) { - perf_cgroup_switch(task, PERF_CGROUP_SWOUT); + struct perf_cgroup *cgrp1; + struct perf_cgroup *cgrp2 = NULL; + + /* + * we come here when we know perf_cgroup_events > 0 + */ + cgrp1 = perf_cgroup_from_task(task); + + /* + * next is NULL when called from perf_event_enable_on_exec() + * that will systematically cause a cgroup_switch() + */ + if (next) + cgrp2 = perf_cgroup_from_task(next); + + /* + * only schedule out current cgroup events if we know + * that we are switching to a different cgroup. Otherwise, + * do no touch the cgroup events. + */ + if (cgrp1 != cgrp2) + perf_cgroup_switch(task, PERF_CGROUP_SWOUT); } -static inline void perf_cgroup_sched_in(struct task_struct *task) +static inline void perf_cgroup_sched_in(struct task_struct *prev, + struct task_struct *task) { - perf_cgroup_switch(task, PERF_CGROUP_SWIN); + struct perf_cgroup *cgrp1; + struct perf_cgroup *cgrp2 = NULL; + + /* + * we come here when we know perf_cgroup_events > 0 + */ + cgrp1 = perf_cgroup_from_task(task); + + /* prev can never be NULL */ + cgrp2 = perf_cgroup_from_task(prev); + + /* + * only need to schedule in cgroup events if we are changing + * cgroup during ctxsw. Cgroup events were not scheduled + * out of ctxsw out if that was not the case. + */ + if (cgrp1 != cgrp2) + perf_cgroup_switch(task, PERF_CGROUP_SWIN); } static inline int perf_cgroup_connect(int fd, struct perf_event *event, @@ -518,11 +558,13 @@ static inline void update_cgrp_time_from_cpuctx(struct perf_cpu_context *cpuctx) { } -static inline void perf_cgroup_sched_out(struct task_struct *task) +static inline void perf_cgroup_sched_out(struct task_struct *task, + struct task_struct *next) { } -static inline void perf_cgroup_sched_in(struct task_struct *task) +static inline void perf_cgroup_sched_in(struct task_struct *prev, + struct task_struct *task) { } @@ -1988,7 +2030,7 @@ void __perf_event_task_sched_out(struct task_struct *task, * cgroup event are system-wide mode only */ if (atomic_read(&__get_cpu_var(perf_cgroup_events))) - perf_cgroup_sched_out(task); + perf_cgroup_sched_out(task, next); } static void task_ctx_sched_out(struct perf_event_context *ctx) @@ -2153,7 +2195,8 @@ static void perf_event_context_sched_in(struct perf_event_context *ctx, * accessing the event control register. If a NMI hits, then it will * keep the event running. */ -void __perf_event_task_sched_in(struct task_struct *task) +void __perf_event_task_sched_in(struct task_struct *prev, + struct task_struct *task) { struct perf_event_context *ctx; int ctxn; @@ -2171,7 +2214,7 @@ void __perf_event_task_sched_in(struct task_struct *task) * cgroup event are system-wide mode only */ if (atomic_read(&__get_cpu_var(perf_cgroup_events))) - perf_cgroup_sched_in(task); + perf_cgroup_sched_in(prev, task); } static u64 perf_calculate_period(struct perf_event *event, u64 nsec, u64 count) @@ -2427,7 +2470,7 @@ static void perf_event_enable_on_exec(struct perf_event_context *ctx) * ctxswin cgroup events which are already scheduled * in. */ - perf_cgroup_sched_out(current); + perf_cgroup_sched_out(current, NULL); raw_spin_lock(&ctx->lock); task_ctx_sched_out(ctx); @@ -3353,8 +3396,8 @@ static int perf_event_index(struct perf_event *event) } static void calc_timer_values(struct perf_event *event, - u64 *running, - u64 *enabled) + u64 *enabled, + u64 *running) { u64 now, ctx_time; diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c index d5a3009da71..dc5114b4c16 100644 --- a/kernel/irq/chip.c +++ b/kernel/irq/chip.c @@ -178,7 +178,7 @@ void irq_shutdown(struct irq_desc *desc) desc->depth = 1; if (desc->irq_data.chip->irq_shutdown) desc->irq_data.chip->irq_shutdown(&desc->irq_data); - if (desc->irq_data.chip->irq_disable) + else if (desc->irq_data.chip->irq_disable) desc->irq_data.chip->irq_disable(&desc->irq_data); else desc->irq_data.chip->irq_mask(&desc->irq_data); diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c index 2e9425889fa..9b956fa2030 100644 --- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -1331,7 +1331,6 @@ int request_threaded_irq(unsigned int irq, irq_handler_t handler, if (!thread_fn) return -EINVAL; handler = irq_default_primary_handler; - irqflags |= IRQF_ONESHOT; } action = kzalloc(sizeof(struct irqaction), GFP_KERNEL); diff --git a/kernel/printk.c b/kernel/printk.c index 836a2ae0ac3..28a40d8171b 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -1604,7 +1604,7 @@ static int __init printk_late_init(void) struct console *con; for_each_console(con) { - if (con->flags & CON_BOOT) { + if (!keep_bootcon && con->flags & CON_BOOT) { printk(KERN_INFO "turn off boot console %s%d\n", con->name, con->index); unregister_console(con); diff --git a/kernel/ptrace.c b/kernel/ptrace.c index 9de3ecfd20f..a70d2a5d8c7 100644 --- a/kernel/ptrace.c +++ b/kernel/ptrace.c @@ -744,20 +744,17 @@ int ptrace_request(struct task_struct *child, long request, break; si = child->last_siginfo; - if (unlikely(!si || si->si_code >> 8 != PTRACE_EVENT_STOP)) - break; - - child->jobctl |= JOBCTL_LISTENING; - - /* - * If NOTIFY is set, it means event happened between start - * of this trap and now. Trigger re-trap immediately. - */ - if (child->jobctl & JOBCTL_TRAP_NOTIFY) - signal_wake_up(child, true); - + if (likely(si && (si->si_code >> 8) == PTRACE_EVENT_STOP)) { + child->jobctl |= JOBCTL_LISTENING; + /* + * If NOTIFY is set, it means event happened between + * start of this trap and now. Trigger re-trap. + */ + if (child->jobctl & JOBCTL_TRAP_NOTIFY) + signal_wake_up(child, true); + ret = 0; + } unlock_task_sighand(child, &flags); - ret = 0; break; case PTRACE_DETACH: /* detach a process that was attached. */ diff --git a/kernel/sched.c b/kernel/sched.c index ccacdbdecf4..ec5f472bc5b 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -3065,7 +3065,7 @@ static void finish_task_switch(struct rq *rq, struct task_struct *prev) #ifdef __ARCH_WANT_INTERRUPTS_ON_CTXSW local_irq_disable(); #endif /* __ARCH_WANT_INTERRUPTS_ON_CTXSW */ - perf_event_task_sched_in(current); + perf_event_task_sched_in(prev, current); #ifdef __ARCH_WANT_INTERRUPTS_ON_CTXSW local_irq_enable(); #endif /* __ARCH_WANT_INTERRUPTS_ON_CTXSW */ @@ -4279,9 +4279,9 @@ pick_next_task(struct rq *rq) } /* - * schedule() is the main scheduler function. + * __schedule() is the main scheduler function. */ -asmlinkage void __sched schedule(void) +static void __sched __schedule(void) { struct task_struct *prev, *next; unsigned long *switch_count; @@ -4322,16 +4322,6 @@ need_resched: if (to_wakeup) try_to_wake_up_local(to_wakeup); } - - /* - * If we are going to sleep and we have plugged IO - * queued, make sure to submit it to avoid deadlocks. - */ - if (blk_needs_flush_plug(prev)) { - raw_spin_unlock(&rq->lock); - blk_schedule_flush_plug(prev); - raw_spin_lock(&rq->lock); - } } switch_count = &prev->nvcsw; } @@ -4369,6 +4359,26 @@ need_resched: if (need_resched()) goto need_resched; } + +static inline void sched_submit_work(struct task_struct *tsk) +{ + if (!tsk->state) + return; + /* + * If we are going to sleep and we have plugged IO queued, + * make sure to submit it to avoid deadlocks. + */ + if (blk_needs_flush_plug(tsk)) + blk_schedule_flush_plug(tsk); +} + +asmlinkage void schedule(void) +{ + struct task_struct *tsk = current; + + sched_submit_work(tsk); + __schedule(); +} EXPORT_SYMBOL(schedule); #ifdef CONFIG_MUTEX_SPIN_ON_OWNER @@ -4435,7 +4445,7 @@ asmlinkage void __sched notrace preempt_schedule(void) do { add_preempt_count_notrace(PREEMPT_ACTIVE); - schedule(); + __schedule(); sub_preempt_count_notrace(PREEMPT_ACTIVE); /* @@ -4463,7 +4473,7 @@ asmlinkage void __sched preempt_schedule_irq(void) do { add_preempt_count(PREEMPT_ACTIVE); local_irq_enable(); - schedule(); + __schedule(); local_irq_disable(); sub_preempt_count(PREEMPT_ACTIVE); @@ -5588,7 +5598,7 @@ static inline int should_resched(void) static void __cond_resched(void) { add_preempt_count(PREEMPT_ACTIVE); - schedule(); + __schedule(); sub_preempt_count(PREEMPT_ACTIVE); } @@ -7443,6 +7453,7 @@ static void __sdt_free(const struct cpumask *cpu_map) struct sched_domain *sd = *per_cpu_ptr(sdd->sd, j); if (sd && (sd->flags & SD_OVERLAP)) free_sched_groups(sd->groups, 0); + kfree(*per_cpu_ptr(sdd->sd, j)); kfree(*per_cpu_ptr(sdd->sg, j)); kfree(*per_cpu_ptr(sdd->sgp, j)); } diff --git a/kernel/sys.c b/kernel/sys.c index dd948a1fca4..18ee1d2f647 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -37,6 +37,8 @@ #include <linux/fs_struct.h> #include <linux/gfp.h> #include <linux/syscore_ops.h> +#include <linux/version.h> +#include <linux/ctype.h> #include <linux/compat.h> #include <linux/syscalls.h> @@ -44,6 +46,8 @@ #include <linux/user_namespace.h> #include <linux/kmsg_dump.h> +/* Move somewhere else to avoid recompiling? */ +#include <generated/utsrelease.h> #include <asm/uaccess.h> #include <asm/io.h> @@ -1161,6 +1165,34 @@ DECLARE_RWSEM(uts_sem); #define override_architecture(name) 0 #endif +/* + * Work around broken programs that cannot handle "Linux 3.0". + * Instead we map 3.x to 2.6.40+x, so e.g. 3.0 would be 2.6.40 + */ +static int override_release(char __user *release, int len) +{ + int ret = 0; + char buf[len]; + + if (current->personality & UNAME26) { + char *rest = UTS_RELEASE; + int ndots = 0; + unsigned v; + + while (*rest) { + if (*rest == '.' && ++ndots >= 3) + break; + if (!isdigit(*rest) && *rest != '.') + break; + rest++; + } + v = ((LINUX_VERSION_CODE >> 8) & 0xff) + 40; + snprintf(buf, len, "2.6.%u%s", v, rest); + ret = copy_to_user(release, buf, len); + } + return ret; +} + SYSCALL_DEFINE1(newuname, struct new_utsname __user *, name) { int errno = 0; @@ -1170,6 +1202,8 @@ SYSCALL_DEFINE1(newuname, struct new_utsname __user *, name) errno = -EFAULT; up_read(&uts_sem); + if (!errno && override_release(name->release, sizeof(name->release))) + errno = -EFAULT; if (!errno && override_architecture(name)) errno = -EFAULT; return errno; @@ -1191,6 +1225,8 @@ SYSCALL_DEFINE1(uname, struct old_utsname __user *, name) error = -EFAULT; up_read(&uts_sem); + if (!error && override_release(name->release, sizeof(name->release))) + error = -EFAULT; if (!error && override_architecture(name)) error = -EFAULT; return error; @@ -1225,6 +1261,8 @@ SYSCALL_DEFINE1(olduname, struct oldold_utsname __user *, name) if (!error && override_architecture(name)) error = -EFAULT; + if (!error && override_release(name->release, sizeof(name->release))) + error = -EFAULT; return error ? -EFAULT : 0; } #endif diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c index 62cbc8877fe..a9a5de07c4f 100644 --- a/kernel/sys_ni.c +++ b/kernel/sys_ni.c @@ -16,7 +16,6 @@ asmlinkage long sys_ni_syscall(void) return -ENOSYS; } -cond_syscall(sys_nfsservctl); cond_syscall(sys_quotactl); cond_syscall(sys32_quotactl); cond_syscall(sys_acct); diff --git a/kernel/sysctl_binary.c b/kernel/sysctl_binary.c index 3b8e028b960..e8bffbe2ba4 100644 --- a/kernel/sysctl_binary.c +++ b/kernel/sysctl_binary.c @@ -1,6 +1,6 @@ #include <linux/stat.h> #include <linux/sysctl.h> -#include "../fs/xfs/linux-2.6/xfs_sysctl.h" +#include "../fs/xfs/xfs_sysctl.h" #include <linux/sunrpc/debug.h> #include <linux/string.h> #include <net/ip_vs.h> diff --git a/kernel/sysctl_check.c b/kernel/sysctl_check.c index 4e4932a7b36..362da653813 100644 --- a/kernel/sysctl_check.c +++ b/kernel/sysctl_check.c @@ -1,6 +1,6 @@ #include <linux/stat.h> #include <linux/sysctl.h> -#include "../fs/xfs/linux-2.6/xfs_sysctl.h" +#include "../fs/xfs/xfs_sysctl.h" #include <linux/sunrpc/debug.h> #include <linux/string.h> #include <net/ip_vs.h> diff --git a/kernel/taskstats.c b/kernel/taskstats.c index e19ce1454ee..e66046456f4 100644 --- a/kernel/taskstats.c +++ b/kernel/taskstats.c @@ -655,6 +655,7 @@ static struct genl_ops taskstats_ops = { .cmd = TASKSTATS_CMD_GET, .doit = taskstats_user_cmd, .policy = taskstats_cmd_get_policy, + .flags = GENL_ADMIN_PERM, }; static struct genl_ops cgroupstats_ops = { diff --git a/kernel/time/alarmtimer.c b/kernel/time/alarmtimer.c index 59f369f98a0..ea5e1a928d5 100644 --- a/kernel/time/alarmtimer.c +++ b/kernel/time/alarmtimer.c @@ -441,6 +441,8 @@ static int alarm_timer_create(struct k_itimer *new_timer) static void alarm_timer_get(struct k_itimer *timr, struct itimerspec *cur_setting) { + memset(cur_setting, 0, sizeof(struct itimerspec)); + cur_setting->it_interval = ktime_to_timespec(timr->it.alarmtimer.period); cur_setting->it_value = @@ -479,11 +481,17 @@ static int alarm_timer_set(struct k_itimer *timr, int flags, if (!rtcdev) return -ENOTSUPP; - /* Save old values */ - old_setting->it_interval = - ktime_to_timespec(timr->it.alarmtimer.period); - old_setting->it_value = - ktime_to_timespec(timr->it.alarmtimer.node.expires); + /* + * XXX HACK! Currently we can DOS a system if the interval + * period on alarmtimers is too small. Cap the interval here + * to 100us and solve this properly in a future patch! -jstultz + */ + if ((new_setting->it_interval.tv_sec == 0) && + (new_setting->it_interval.tv_nsec < 100000)) + new_setting->it_interval.tv_nsec = 100000; + + if (old_setting) + alarm_timer_get(timr, old_setting); /* If the timer was already set, cancel it */ alarm_cancel(&timr->it.alarmtimer); diff --git a/kernel/tsacct.c b/kernel/tsacct.c index 24dc60d9fa1..5bbfac85866 100644 --- a/kernel/tsacct.c +++ b/kernel/tsacct.c @@ -78,6 +78,7 @@ void bacct_add_tsk(struct taskstats *stats, struct task_struct *tsk) #define KB 1024 #define MB (1024*KB) +#define KB_MASK (~(KB-1)) /* * fill in extended accounting fields */ @@ -95,14 +96,14 @@ void xacct_add_tsk(struct taskstats *stats, struct task_struct *p) stats->hiwater_vm = get_mm_hiwater_vm(mm) * PAGE_SIZE / KB; mmput(mm); } - stats->read_char = p->ioac.rchar; - stats->write_char = p->ioac.wchar; - stats->read_syscalls = p->ioac.syscr; - stats->write_syscalls = p->ioac.syscw; + stats->read_char = p->ioac.rchar & KB_MASK; + stats->write_char = p->ioac.wchar & KB_MASK; + stats->read_syscalls = p->ioac.syscr & KB_MASK; + stats->write_syscalls = p->ioac.syscw & KB_MASK; #ifdef CONFIG_TASK_IO_ACCOUNTING - stats->read_bytes = p->ioac.read_bytes; - stats->write_bytes = p->ioac.write_bytes; - stats->cancelled_write_bytes = p->ioac.cancelled_write_bytes; + stats->read_bytes = p->ioac.read_bytes & KB_MASK; + stats->write_bytes = p->ioac.write_bytes & KB_MASK; + stats->cancelled_write_bytes = p->ioac.cancelled_write_bytes & KB_MASK; #else stats->read_bytes = 0; stats->write_bytes = 0; diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 25fb1b0e53f..1783aabc612 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -2412,8 +2412,13 @@ reflush: for_each_cwq_cpu(cpu, wq) { struct cpu_workqueue_struct *cwq = get_cwq(cpu, wq); + bool drained; - if (!cwq->nr_active && list_empty(&cwq->delayed_works)) + spin_lock_irq(&cwq->gcwq->lock); + drained = !cwq->nr_active && list_empty(&cwq->delayed_works); + spin_unlock_irq(&cwq->gcwq->lock); + + if (drained) continue; if (++flush_cnt == 10 || diff --git a/lib/Makefile b/lib/Makefile index d5d175c8a6c..3f5bc6d903e 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -12,7 +12,7 @@ lib-y := ctype.o string.o vsprintf.o cmdline.o \ idr.o int_sqrt.o extable.o prio_tree.o \ sha1.o md5.o irq_regs.o reciprocal_div.o argv_split.o \ proportions.o prio_heap.o ratelimit.o show_mem.o \ - is_single_threaded.o plist.o decompress.o find_next_bit.o + is_single_threaded.o plist.o decompress.o lib-$(CONFIG_MMU) += ioremap.o lib-$(CONFIG_SMP) += cpumask.o @@ -22,7 +22,7 @@ lib-y += kobject.o kref.o klist.o obj-y += bcd.o div64.o sort.o parser.o halfmd4.o debug_locks.o random32.o \ bust_spinlocks.o hexdump.o kasprintf.o bitmap.o scatterlist.o \ string_helpers.o gcd.o lcm.o list_sort.o uuid.o flex_array.o \ - bsearch.o find_last_bit.o + bsearch.o find_last_bit.o find_next_bit.o obj-y += kstrtox.o obj-$(CONFIG_TEST_KSTRTOX) += test-kstrtox.o diff --git a/lib/sha1.c b/lib/sha1.c index f33271dd00c..1de509a159c 100644 --- a/lib/sha1.c +++ b/lib/sha1.c @@ -8,6 +8,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/bitops.h> +#include <linux/cryptohash.h> #include <asm/unaligned.h> /* diff --git a/lib/xz/xz_dec_bcj.c b/lib/xz/xz_dec_bcj.c index e51e2558ca9..a768e6d28bb 100644 --- a/lib/xz/xz_dec_bcj.c +++ b/lib/xz/xz_dec_bcj.c @@ -441,8 +441,12 @@ XZ_EXTERN enum xz_ret xz_dec_bcj_run(struct xz_dec_bcj *s, * next filter in the chain. Apply the BCJ filter on the new data * in the output buffer. If everything cannot be filtered, copy it * to temp and rewind the output buffer position accordingly. + * + * This needs to be always run when temp.size == 0 to handle a special + * case where the output buffer is full and the next filter has no + * more output coming but hasn't returned XZ_STREAM_END yet. */ - if (s->temp.size < b->out_size - b->out_pos) { + if (s->temp.size < b->out_size - b->out_pos || s->temp.size == 0) { out_start = b->out_pos; memcpy(b->out + b->out_pos, s->temp.buf, s->temp.size); b->out_pos += s->temp.size; @@ -465,16 +469,25 @@ XZ_EXTERN enum xz_ret xz_dec_bcj_run(struct xz_dec_bcj *s, s->temp.size = b->out_pos - out_start; b->out_pos -= s->temp.size; memcpy(s->temp.buf, b->out + b->out_pos, s->temp.size); + + /* + * If there wasn't enough input to the next filter to fill + * the output buffer with unfiltered data, there's no point + * to try decoding more data to temp. + */ + if (b->out_pos + s->temp.size < b->out_size) + return XZ_OK; } /* - * If we have unfiltered data in temp, try to fill by decoding more - * data from the next filter. Apply the BCJ filter on temp. Then we - * hopefully can fill the actual output buffer by copying filtered - * data from temp. A mix of filtered and unfiltered data may be left - * in temp; it will be taken care on the next call to this function. + * We have unfiltered data in temp. If the output buffer isn't full + * yet, try to fill the temp buffer by decoding more data from the + * next filter. Apply the BCJ filter on temp. Then we hopefully can + * fill the actual output buffer by copying filtered data from temp. + * A mix of filtered and unfiltered data may be left in temp; it will + * be taken care on the next call to this function. */ - if (s->temp.size > 0) { + if (b->out_pos < b->out_size) { /* Make b->out{,_pos,_size} temporarily point to s->temp. */ s->out = b->out; s->out_pos = b->out_pos; diff --git a/mm/backing-dev.c b/mm/backing-dev.c index d6edf8d14f9..a87da524a4a 100644 --- a/mm/backing-dev.c +++ b/mm/backing-dev.c @@ -359,6 +359,17 @@ static unsigned long bdi_longest_inactive(void) return max(5UL * 60 * HZ, interval); } +/* + * Clear pending bit and wakeup anybody waiting for flusher thread creation or + * shutdown + */ +static void bdi_clear_pending(struct backing_dev_info *bdi) +{ + clear_bit(BDI_pending, &bdi->state); + smp_mb__after_clear_bit(); + wake_up_bit(&bdi->state, BDI_pending); +} + static int bdi_forker_thread(void *ptr) { struct bdi_writeback *me = ptr; @@ -390,6 +401,13 @@ static int bdi_forker_thread(void *ptr) } spin_lock_bh(&bdi_lock); + /* + * In the following loop we are going to check whether we have + * some work to do without any synchronization with tasks + * waking us up to do work for them. So we have to set task + * state already here so that we don't miss wakeups coming + * after we verify some condition. + */ set_current_state(TASK_INTERRUPTIBLE); list_for_each_entry(bdi, &bdi_list, bdi_list) { @@ -469,11 +487,13 @@ static int bdi_forker_thread(void *ptr) spin_unlock_bh(&bdi->wb_lock); wake_up_process(task); } + bdi_clear_pending(bdi); break; case KILL_THREAD: __set_current_state(TASK_RUNNING); kthread_stop(task); + bdi_clear_pending(bdi); break; case NO_ACTION: @@ -489,16 +509,8 @@ static int bdi_forker_thread(void *ptr) else schedule_timeout(msecs_to_jiffies(dirty_writeback_interval * 10)); try_to_freeze(); - /* Back to the main loop */ - continue; + break; } - - /* - * Clear pending bit and wakeup anybody waiting to tear us down. - */ - clear_bit(BDI_pending, &bdi->state); - smp_mb__after_clear_bit(); - wake_up_bit(&bdi->state, BDI_pending); } return 0; diff --git a/mm/filemap.c b/mm/filemap.c index 645a080ba4d..7771871fa35 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -827,13 +827,14 @@ unsigned find_get_pages(struct address_space *mapping, pgoff_t start, { unsigned int i; unsigned int ret; - unsigned int nr_found; + unsigned int nr_found, nr_skip; rcu_read_lock(); restart: nr_found = radix_tree_gang_lookup_slot(&mapping->page_tree, (void ***)pages, NULL, start, nr_pages); ret = 0; + nr_skip = 0; for (i = 0; i < nr_found; i++) { struct page *page; repeat: @@ -856,6 +857,7 @@ repeat: * here as an exceptional entry: so skip over it - * we only reach this from invalidate_mapping_pages(). */ + nr_skip++; continue; } @@ -876,7 +878,7 @@ repeat: * If all entries were removed before we could secure them, * try again, because callers stop trying once 0 is returned. */ - if (unlikely(!ret && nr_found)) + if (unlikely(!ret && nr_found > nr_skip)) goto restart; rcu_read_unlock(); return ret; diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 930de943727..3508777837c 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -204,50 +204,6 @@ struct mem_cgroup_eventfd_list { static void mem_cgroup_threshold(struct mem_cgroup *mem); static void mem_cgroup_oom_notify(struct mem_cgroup *mem); -enum { - SCAN_BY_LIMIT, - SCAN_BY_SYSTEM, - NR_SCAN_CONTEXT, - SCAN_BY_SHRINK, /* not recorded now */ -}; - -enum { - SCAN, - SCAN_ANON, - SCAN_FILE, - ROTATE, - ROTATE_ANON, - ROTATE_FILE, - FREED, - FREED_ANON, - FREED_FILE, - ELAPSED, - NR_SCANSTATS, -}; - -struct scanstat { - spinlock_t lock; - unsigned long stats[NR_SCAN_CONTEXT][NR_SCANSTATS]; - unsigned long rootstats[NR_SCAN_CONTEXT][NR_SCANSTATS]; -}; - -const char *scanstat_string[NR_SCANSTATS] = { - "scanned_pages", - "scanned_anon_pages", - "scanned_file_pages", - "rotated_pages", - "rotated_anon_pages", - "rotated_file_pages", - "freed_pages", - "freed_anon_pages", - "freed_file_pages", - "elapsed_ns", -}; -#define SCANSTAT_WORD_LIMIT "_by_limit" -#define SCANSTAT_WORD_SYSTEM "_by_system" -#define SCANSTAT_WORD_HIERARCHY "_under_hierarchy" - - /* * The memory controller data structure. The memory controller controls both * page cache and RSS per cgroup. We would eventually like to provide @@ -313,8 +269,7 @@ struct mem_cgroup { /* For oom notifier event fd */ struct list_head oom_notify; - /* For recording LRU-scan statistics */ - struct scanstat scanstat; + /* * Should we move charges of a task when a task is moved into this * mem_cgroup ? And what type of charges should we move ? @@ -1678,44 +1633,6 @@ bool mem_cgroup_reclaimable(struct mem_cgroup *mem, bool noswap) } #endif -static void __mem_cgroup_record_scanstat(unsigned long *stats, - struct memcg_scanrecord *rec) -{ - - stats[SCAN] += rec->nr_scanned[0] + rec->nr_scanned[1]; - stats[SCAN_ANON] += rec->nr_scanned[0]; - stats[SCAN_FILE] += rec->nr_scanned[1]; - - stats[ROTATE] += rec->nr_rotated[0] + rec->nr_rotated[1]; - stats[ROTATE_ANON] += rec->nr_rotated[0]; - stats[ROTATE_FILE] += rec->nr_rotated[1]; - - stats[FREED] += rec->nr_freed[0] + rec->nr_freed[1]; - stats[FREED_ANON] += rec->nr_freed[0]; - stats[FREED_FILE] += rec->nr_freed[1]; - - stats[ELAPSED] += rec->elapsed; -} - -static void mem_cgroup_record_scanstat(struct memcg_scanrecord *rec) -{ - struct mem_cgroup *mem; - int context = rec->context; - - if (context >= NR_SCAN_CONTEXT) - return; - - mem = rec->mem; - spin_lock(&mem->scanstat.lock); - __mem_cgroup_record_scanstat(mem->scanstat.stats[context], rec); - spin_unlock(&mem->scanstat.lock); - - mem = rec->root; - spin_lock(&mem->scanstat.lock); - __mem_cgroup_record_scanstat(mem->scanstat.rootstats[context], rec); - spin_unlock(&mem->scanstat.lock); -} - /* * Scan the hierarchy if needed to reclaim memory. We remember the last child * we reclaimed from, so that we don't end up penalizing one child extensively @@ -1740,9 +1657,8 @@ static int mem_cgroup_hierarchical_reclaim(struct mem_cgroup *root_mem, bool noswap = reclaim_options & MEM_CGROUP_RECLAIM_NOSWAP; bool shrink = reclaim_options & MEM_CGROUP_RECLAIM_SHRINK; bool check_soft = reclaim_options & MEM_CGROUP_RECLAIM_SOFT; - struct memcg_scanrecord rec; unsigned long excess; - unsigned long scanned; + unsigned long nr_scanned; excess = res_counter_soft_limit_excess(&root_mem->res) >> PAGE_SHIFT; @@ -1750,15 +1666,6 @@ static int mem_cgroup_hierarchical_reclaim(struct mem_cgroup *root_mem, if (!check_soft && !shrink && root_mem->memsw_is_minimum) noswap = true; - if (shrink) - rec.context = SCAN_BY_SHRINK; - else if (check_soft) - rec.context = SCAN_BY_SYSTEM; - else - rec.context = SCAN_BY_LIMIT; - - rec.root = root_mem; - while (1) { victim = mem_cgroup_select_victim(root_mem); if (victim == root_mem) { @@ -1799,23 +1706,14 @@ static int mem_cgroup_hierarchical_reclaim(struct mem_cgroup *root_mem, css_put(&victim->css); continue; } - rec.mem = victim; - rec.nr_scanned[0] = 0; - rec.nr_scanned[1] = 0; - rec.nr_rotated[0] = 0; - rec.nr_rotated[1] = 0; - rec.nr_freed[0] = 0; - rec.nr_freed[1] = 0; - rec.elapsed = 0; /* we use swappiness of local cgroup */ if (check_soft) { ret = mem_cgroup_shrink_node_zone(victim, gfp_mask, - noswap, zone, &rec, &scanned); - *total_scanned += scanned; + noswap, zone, &nr_scanned); + *total_scanned += nr_scanned; } else ret = try_to_free_mem_cgroup_pages(victim, gfp_mask, - noswap, &rec); - mem_cgroup_record_scanstat(&rec); + noswap); css_put(&victim->css); /* * At shrinking usage, we can't check we should stop here or @@ -1841,29 +1739,23 @@ static int mem_cgroup_hierarchical_reclaim(struct mem_cgroup *root_mem, */ static bool mem_cgroup_oom_lock(struct mem_cgroup *mem) { - int lock_count = -1; struct mem_cgroup *iter, *failed = NULL; bool cond = true; for_each_mem_cgroup_tree_cond(iter, mem, cond) { - bool locked = iter->oom_lock; - - iter->oom_lock = true; - if (lock_count == -1) - lock_count = iter->oom_lock; - else if (lock_count != locked) { + if (iter->oom_lock) { /* * this subtree of our hierarchy is already locked * so we cannot give a lock. */ - lock_count = 0; failed = iter; cond = false; - } + } else + iter->oom_lock = true; } if (!failed) - goto done; + return true; /* * OK, we failed to lock the whole subtree so we have to clean up @@ -1877,8 +1769,7 @@ static bool mem_cgroup_oom_lock(struct mem_cgroup *mem) } iter->oom_lock = false; } -done: - return lock_count; + return false; } /* @@ -2169,13 +2060,7 @@ static void drain_all_stock(struct mem_cgroup *root_mem, bool sync) /* Notify other cpus that system-wide "drain" is running */ get_online_cpus(); - /* - * Get a hint for avoiding draining charges on the current cpu, - * which must be exhausted by our charging. It is not required that - * this be a precise check, so we use raw_smp_processor_id() instead of - * getcpu()/putcpu(). - */ - curcpu = raw_smp_processor_id(); + curcpu = get_cpu(); for_each_online_cpu(cpu) { struct memcg_stock_pcp *stock = &per_cpu(memcg_stock, cpu); struct mem_cgroup *mem; @@ -2192,6 +2077,7 @@ static void drain_all_stock(struct mem_cgroup *root_mem, bool sync) schedule_work_on(cpu, &stock->work); } } + put_cpu(); if (!sync) goto out; @@ -3866,18 +3752,14 @@ try_to_free: /* try to free all pages in this cgroup */ shrink = 1; while (nr_retries && mem->res.usage > 0) { - struct memcg_scanrecord rec; int progress; if (signal_pending(current)) { ret = -EINTR; goto out; } - rec.context = SCAN_BY_SHRINK; - rec.mem = mem; - rec.root = mem; progress = try_to_free_mem_cgroup_pages(mem, GFP_KERNEL, - false, &rec); + false); if (!progress) { nr_retries--; /* maybe some writeback is necessary */ @@ -4721,54 +4603,6 @@ static int mem_control_numa_stat_open(struct inode *unused, struct file *file) } #endif /* CONFIG_NUMA */ -static int mem_cgroup_vmscan_stat_read(struct cgroup *cgrp, - struct cftype *cft, - struct cgroup_map_cb *cb) -{ - struct mem_cgroup *mem = mem_cgroup_from_cont(cgrp); - char string[64]; - int i; - - for (i = 0; i < NR_SCANSTATS; i++) { - strcpy(string, scanstat_string[i]); - strcat(string, SCANSTAT_WORD_LIMIT); - cb->fill(cb, string, mem->scanstat.stats[SCAN_BY_LIMIT][i]); - } - - for (i = 0; i < NR_SCANSTATS; i++) { - strcpy(string, scanstat_string[i]); - strcat(string, SCANSTAT_WORD_SYSTEM); - cb->fill(cb, string, mem->scanstat.stats[SCAN_BY_SYSTEM][i]); - } - - for (i = 0; i < NR_SCANSTATS; i++) { - strcpy(string, scanstat_string[i]); - strcat(string, SCANSTAT_WORD_LIMIT); - strcat(string, SCANSTAT_WORD_HIERARCHY); - cb->fill(cb, string, mem->scanstat.rootstats[SCAN_BY_LIMIT][i]); - } - for (i = 0; i < NR_SCANSTATS; i++) { - strcpy(string, scanstat_string[i]); - strcat(string, SCANSTAT_WORD_SYSTEM); - strcat(string, SCANSTAT_WORD_HIERARCHY); - cb->fill(cb, string, mem->scanstat.rootstats[SCAN_BY_SYSTEM][i]); - } - return 0; -} - -static int mem_cgroup_reset_vmscan_stat(struct cgroup *cgrp, - unsigned int event) -{ - struct mem_cgroup *mem = mem_cgroup_from_cont(cgrp); - - spin_lock(&mem->scanstat.lock); - memset(&mem->scanstat.stats, 0, sizeof(mem->scanstat.stats)); - memset(&mem->scanstat.rootstats, 0, sizeof(mem->scanstat.rootstats)); - spin_unlock(&mem->scanstat.lock); - return 0; -} - - static struct cftype mem_cgroup_files[] = { { .name = "usage_in_bytes", @@ -4839,11 +4673,6 @@ static struct cftype mem_cgroup_files[] = { .mode = S_IRUGO, }, #endif - { - .name = "vmscan_stat", - .read_map = mem_cgroup_vmscan_stat_read, - .trigger = mem_cgroup_reset_vmscan_stat, - }, }; #ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP @@ -5107,7 +4936,6 @@ mem_cgroup_create(struct cgroup_subsys *ss, struct cgroup *cont) atomic_set(&mem->refcnt, 1); mem->move_charge_at_immigrate = 0; mutex_init(&mem->thresholds_lock); - spin_lock_init(&mem->scanstat.lock); return &mem->css; free_out: __mem_cgroup_free(mem); diff --git a/mm/mempolicy.c b/mm/mempolicy.c index 8b57173c1dd..9c51f9f58ca 100644 --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -636,7 +636,6 @@ static int mbind_range(struct mm_struct *mm, unsigned long start, struct vm_area_struct *prev; struct vm_area_struct *vma; int err = 0; - pgoff_t pgoff; unsigned long vmstart; unsigned long vmend; @@ -649,9 +648,9 @@ static int mbind_range(struct mm_struct *mm, unsigned long start, vmstart = max(start, vma->vm_start); vmend = min(end, vma->vm_end); - pgoff = vma->vm_pgoff + ((start - vma->vm_start) >> PAGE_SHIFT); prev = vma_merge(mm, prev, vmstart, vmend, vma->vm_flags, - vma->anon_vma, vma->vm_file, pgoff, new_pol); + vma->anon_vma, vma->vm_file, vma->vm_pgoff, + new_pol); if (prev) { vma = prev; next = vma->vm_next; @@ -1412,7 +1411,9 @@ asmlinkage long compat_sys_get_mempolicy(int __user *policy, err = sys_get_mempolicy(policy, nm, nr_bits+1, addr, flags); if (!err && nmask) { - err = copy_from_user(bm, nm, alloc_size); + unsigned long copy_size; + copy_size = min_t(unsigned long, sizeof(bm), alloc_size); + err = copy_from_user(bm, nm, copy_size); /* ensure entire bitmap is zeroed */ err |= clear_user(nmask, ALIGN(maxnode-1, 8) / 8); err |= compat_put_bitmap(nmask, bm, nr_bits); diff --git a/mm/page-writeback.c b/mm/page-writeback.c index d1960744f88..0e309cd1b5b 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -754,21 +754,10 @@ static void balance_dirty_pages(struct address_space *mapping, * 200ms is typically more than enough to curb heavy dirtiers; * (b) the pause time limit makes the dirtiers more responsive. */ - if (nr_dirty < dirty_thresh + - dirty_thresh / DIRTY_MAXPAUSE_AREA && + if (nr_dirty < dirty_thresh && + bdi_dirty < (task_bdi_thresh + bdi_thresh) / 2 && time_after(jiffies, start_time + MAX_PAUSE)) break; - /* - * pass-good area. When some bdi gets blocked (eg. NFS server - * not responding), or write bandwidth dropped dramatically due - * to concurrent reads, or dirty threshold suddenly dropped and - * the dirty pages cannot be brought down anytime soon (eg. on - * slow USB stick), at least let go of the good bdi's. - */ - if (nr_dirty < dirty_thresh + - dirty_thresh / DIRTY_PASSGOOD_AREA && - bdi_dirty < bdi_thresh) - break; /* * Increase the delay for each loop, up to our previous diff --git a/mm/slub.c b/mm/slub.c index 9f662d70eb4..7c54fe83a90 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -2377,7 +2377,7 @@ static void __slab_free(struct kmem_cache *s, struct page *page, */ if (unlikely(!prior)) { remove_full(s, page); - add_partial(n, page, 0); + add_partial(n, page, 1); stat(s, FREE_ADD_PARTIAL); } } diff --git a/mm/vmalloc.c b/mm/vmalloc.c index 7ef0903058e..5016f19e166 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -2140,6 +2140,14 @@ struct vm_struct *alloc_vm_area(size_t size) return NULL; } + /* + * If the allocated address space is passed to a hypercall + * before being used then we cannot rely on a page fault to + * trigger an update of the page tables. So sync all the page + * tables here. + */ + vmalloc_sync_all(); + return area; } EXPORT_SYMBOL_GPL(alloc_vm_area); diff --git a/mm/vmscan.c b/mm/vmscan.c index 7ef69124fa3..b55699cd906 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -105,7 +105,6 @@ struct scan_control { /* Which cgroup do we reclaim from */ struct mem_cgroup *mem_cgroup; - struct memcg_scanrecord *memcg_record; /* * Nodemask of nodes allowed by the caller. If NULL, all nodes @@ -1349,8 +1348,6 @@ putback_lru_pages(struct zone *zone, struct scan_control *sc, int file = is_file_lru(lru); int numpages = hpage_nr_pages(page); reclaim_stat->recent_rotated[file] += numpages; - if (!scanning_global_lru(sc)) - sc->memcg_record->nr_rotated[file] += numpages; } if (!pagevec_add(&pvec, page)) { spin_unlock_irq(&zone->lru_lock); @@ -1394,10 +1391,6 @@ static noinline_for_stack void update_isolated_counts(struct zone *zone, reclaim_stat->recent_scanned[0] += *nr_anon; reclaim_stat->recent_scanned[1] += *nr_file; - if (!scanning_global_lru(sc)) { - sc->memcg_record->nr_scanned[0] += *nr_anon; - sc->memcg_record->nr_scanned[1] += *nr_file; - } } /* @@ -1511,9 +1504,6 @@ shrink_inactive_list(unsigned long nr_to_scan, struct zone *zone, nr_reclaimed += shrink_page_list(&page_list, zone, sc); } - if (!scanning_global_lru(sc)) - sc->memcg_record->nr_freed[file] += nr_reclaimed; - local_irq_disable(); if (current_is_kswapd()) __count_vm_events(KSWAPD_STEAL, nr_reclaimed); @@ -1613,8 +1603,6 @@ static void shrink_active_list(unsigned long nr_pages, struct zone *zone, } reclaim_stat->recent_scanned[file] += nr_taken; - if (!scanning_global_lru(sc)) - sc->memcg_record->nr_scanned[file] += nr_taken; __count_zone_vm_events(PGREFILL, zone, pgscanned); if (file) @@ -1666,8 +1654,6 @@ static void shrink_active_list(unsigned long nr_pages, struct zone *zone, * get_scan_ratio. */ reclaim_stat->recent_rotated[file] += nr_rotated; - if (!scanning_global_lru(sc)) - sc->memcg_record->nr_rotated[file] += nr_rotated; move_active_pages_to_lru(zone, &l_active, LRU_ACTIVE + file * LRU_FILE); @@ -1808,23 +1794,15 @@ static void get_scan_count(struct zone *zone, struct scan_control *sc, u64 fraction[2], denominator; enum lru_list l; int noswap = 0; - int force_scan = 0; + bool force_scan = false; unsigned long nr_force_scan[2]; - - anon = zone_nr_lru_pages(zone, sc, LRU_ACTIVE_ANON) + - zone_nr_lru_pages(zone, sc, LRU_INACTIVE_ANON); - file = zone_nr_lru_pages(zone, sc, LRU_ACTIVE_FILE) + - zone_nr_lru_pages(zone, sc, LRU_INACTIVE_FILE); - - if (((anon + file) >> priority) < SWAP_CLUSTER_MAX) { - /* kswapd does zone balancing and need to scan this zone */ - if (scanning_global_lru(sc) && current_is_kswapd()) - force_scan = 1; - /* memcg may have small limit and need to avoid priority drop */ - if (!scanning_global_lru(sc)) - force_scan = 1; - } + /* kswapd does zone balancing and needs to scan this zone */ + if (scanning_global_lru(sc) && current_is_kswapd()) + force_scan = true; + /* memcg may have small limit and need to avoid priority drop */ + if (!scanning_global_lru(sc)) + force_scan = true; /* If we have no swap space, do not bother scanning anon pages. */ if (!sc->may_swap || (nr_swap_pages <= 0)) { @@ -1837,6 +1815,11 @@ static void get_scan_count(struct zone *zone, struct scan_control *sc, goto out; } + anon = zone_nr_lru_pages(zone, sc, LRU_ACTIVE_ANON) + + zone_nr_lru_pages(zone, sc, LRU_INACTIVE_ANON); + file = zone_nr_lru_pages(zone, sc, LRU_ACTIVE_FILE) + + zone_nr_lru_pages(zone, sc, LRU_INACTIVE_FILE); + if (scanning_global_lru(sc)) { free = zone_page_state(zone, NR_FREE_PAGES); /* If we have very few page cache pages, @@ -2268,10 +2251,9 @@ unsigned long try_to_free_pages(struct zonelist *zonelist, int order, #ifdef CONFIG_CGROUP_MEM_RES_CTLR unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem, - gfp_t gfp_mask, bool noswap, - struct zone *zone, - struct memcg_scanrecord *rec, - unsigned long *scanned) + gfp_t gfp_mask, bool noswap, + struct zone *zone, + unsigned long *nr_scanned) { struct scan_control sc = { .nr_scanned = 0, @@ -2281,9 +2263,7 @@ unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem, .may_swap = !noswap, .order = 0, .mem_cgroup = mem, - .memcg_record = rec, }; - unsigned long start, end; sc.gfp_mask = (gfp_mask & GFP_RECLAIM_MASK) | (GFP_HIGHUSER_MOVABLE & ~GFP_RECLAIM_MASK); @@ -2292,7 +2272,6 @@ unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem, sc.may_writepage, sc.gfp_mask); - start = sched_clock(); /* * NOTE: Although we can get the priority field, using it * here is not a good idea, since it limits the pages we can scan. @@ -2301,25 +2280,19 @@ unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem, * the priority and make it zero. */ shrink_zone(0, zone, &sc); - end = sched_clock(); - - if (rec) - rec->elapsed += end - start; - *scanned = sc.nr_scanned; trace_mm_vmscan_memcg_softlimit_reclaim_end(sc.nr_reclaimed); + *nr_scanned = sc.nr_scanned; return sc.nr_reclaimed; } unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem_cont, gfp_t gfp_mask, - bool noswap, - struct memcg_scanrecord *rec) + bool noswap) { struct zonelist *zonelist; unsigned long nr_reclaimed; - unsigned long start, end; int nid; struct scan_control sc = { .may_writepage = !laptop_mode, @@ -2328,7 +2301,6 @@ unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem_cont, .nr_to_reclaim = SWAP_CLUSTER_MAX, .order = 0, .mem_cgroup = mem_cont, - .memcg_record = rec, .nodemask = NULL, /* we don't care the placement */ .gfp_mask = (gfp_mask & GFP_RECLAIM_MASK) | (GFP_HIGHUSER_MOVABLE & ~GFP_RECLAIM_MASK), @@ -2337,7 +2309,6 @@ unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem_cont, .gfp_mask = sc.gfp_mask, }; - start = sched_clock(); /* * Unlike direct reclaim via alloc_pages(), memcg's reclaim doesn't * take care of from where we get pages. So the node where we start the @@ -2352,9 +2323,6 @@ unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem_cont, sc.gfp_mask); nr_reclaimed = do_try_to_free_pages(zonelist, &sc, &shrink); - end = sched_clock(); - if (rec) - rec->elapsed += end - start; trace_mm_vmscan_memcg_reclaim_end(nr_reclaimed); @@ -2529,6 +2497,9 @@ loop_again: high_wmark_pages(zone), 0, 0)) { end_zone = i; break; + } else { + /* If balanced, clear the congested flag */ + zone_clear_flag(zone, ZONE_CONGESTED); } } if (i < 0) diff --git a/mm/vmstat.c b/mm/vmstat.c index 20c18b7694b..d52b13d28e8 100644 --- a/mm/vmstat.c +++ b/mm/vmstat.c @@ -659,7 +659,7 @@ static void walk_zones_in_node(struct seq_file *m, pg_data_t *pgdat, } #endif -#if defined(CONFIG_PROC_FS) || defined(CONFIG_SYSFS) +#if defined(CONFIG_PROC_FS) || defined(CONFIG_SYSFS) || defined(CONFIG_NUMA) #ifdef CONFIG_ZONE_DMA #define TEXT_FOR_DMA(xx) xx "_dma", #else @@ -788,7 +788,7 @@ const char * const vmstat_text[] = { #endif /* CONFIG_VM_EVENTS_COUNTERS */ }; -#endif /* CONFIG_PROC_FS || CONFIG_SYSFS */ +#endif /* CONFIG_PROC_FS || CONFIG_SYSFS || CONFIG_NUMA */ #ifdef CONFIG_PROC_FS diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c index 5f27f8e3025..f1f2f7bb666 100644 --- a/net/8021q/vlan_core.c +++ b/net/8021q/vlan_core.c @@ -167,6 +167,8 @@ struct sk_buff *vlan_untag(struct sk_buff *skb) if (unlikely(!skb)) goto err_free; + skb_reset_network_header(skb); + skb_reset_transport_header(skb); return skb; err_free: diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c index 175b5135bdc..e317583fcc7 100644 --- a/net/9p/trans_virtio.c +++ b/net/9p/trans_virtio.c @@ -263,7 +263,6 @@ p9_virtio_request(struct p9_client *client, struct p9_req_t *req) { int in, out, inp, outp; struct virtio_chan *chan = client->trans; - char *rdata = (char *)req->rc+sizeof(struct p9_fcall); unsigned long flags; size_t pdata_off = 0; struct trans_rpage_info *rpinfo = NULL; @@ -346,7 +345,8 @@ req_retry_pinned: * Arrange in such a way that server places header in the * alloced memory and payload onto the user buffer. */ - inp = pack_sg_list(chan->sg, out, VIRTQUEUE_NUM, rdata, 11); + inp = pack_sg_list(chan->sg, out, + VIRTQUEUE_NUM, req->rc->sdata, 11); /* * Running executables in the filesystem may result in * a read request with kernel buffer as opposed to user buffer. @@ -366,8 +366,8 @@ req_retry_pinned: } in += inp; } else { - in = pack_sg_list(chan->sg, out, VIRTQUEUE_NUM, rdata, - req->rc->capacity); + in = pack_sg_list(chan->sg, out, VIRTQUEUE_NUM, + req->rc->sdata, req->rc->capacity); } err = virtqueue_add_buf(chan->vq, chan->sg, out, in, req->tc); @@ -592,7 +592,14 @@ static struct p9_trans_module p9_virtio_trans = { .close = p9_virtio_close, .request = p9_virtio_request, .cancel = p9_virtio_cancel, - .maxsize = PAGE_SIZE*VIRTQUEUE_NUM, + + /* + * We leave one entry for input and one entry for response + * headers. We also skip one more entry to accomodate, address + * that are not at page boundary, that can result in an extra + * page in zero copy. + */ + .maxsize = PAGE_SIZE * (VIRTQUEUE_NUM - 3), .pref = P9_TRANS_PREF_PAYLOAD_SEP, .def = 0, .owner = THIS_MODULE, diff --git a/net/atm/br2684.c b/net/atm/br2684.c index 52cfd0c3ea7..d07223c834a 100644 --- a/net/atm/br2684.c +++ b/net/atm/br2684.c @@ -558,12 +558,13 @@ static int br2684_regvcc(struct atm_vcc *atmvcc, void __user * arg) spin_unlock_irqrestore(&rq->lock, flags); skb_queue_walk_safe(&queue, skb, tmp) { - struct net_device *dev = skb->dev; + struct net_device *dev; + + br2684_push(atmvcc, skb); + dev = skb->dev; dev->stats.rx_bytes -= skb->len; dev->stats.rx_packets--; - - br2684_push(atmvcc, skb); } /* initialize netdev carrier state */ diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c index 8add9b49991..117e0d16178 100644 --- a/net/bluetooth/af_bluetooth.c +++ b/net/bluetooth/af_bluetooth.c @@ -494,9 +494,8 @@ int bt_sock_wait_state(struct sock *sk, int state, unsigned long timeo) BT_DBG("sk %p", sk); add_wait_queue(sk_sleep(sk), &wait); + set_current_state(TASK_INTERRUPTIBLE); while (sk->sk_state != state) { - set_current_state(TASK_INTERRUPTIBLE); - if (!timeo) { err = -EINPROGRESS; break; @@ -510,12 +509,13 @@ int bt_sock_wait_state(struct sock *sk, int state, unsigned long timeo) release_sock(sk); timeo = schedule_timeout(timeo); lock_sock(sk); + set_current_state(TASK_INTERRUPTIBLE); err = sock_error(sk); if (err) break; } - set_current_state(TASK_RUNNING); + __set_current_state(TASK_RUNNING); remove_wait_queue(sk_sleep(sk), &wait); return err; } diff --git a/net/bluetooth/bnep/bnep.h b/net/bluetooth/bnep/bnep.h index 8e6c06158f8..e7ee5314f39 100644 --- a/net/bluetooth/bnep/bnep.h +++ b/net/bluetooth/bnep/bnep.h @@ -155,6 +155,7 @@ struct bnep_session { unsigned int role; unsigned long state; unsigned long flags; + atomic_t terminate; struct task_struct *task; struct ethhdr eh; diff --git a/net/bluetooth/bnep/core.c b/net/bluetooth/bnep/core.c index ca39fcf010c..d9edfe8bf9d 100644 --- a/net/bluetooth/bnep/core.c +++ b/net/bluetooth/bnep/core.c @@ -484,9 +484,11 @@ static int bnep_session(void *arg) init_waitqueue_entry(&wait, current); add_wait_queue(sk_sleep(sk), &wait); - while (!kthread_should_stop()) { + while (1) { set_current_state(TASK_INTERRUPTIBLE); + if (atomic_read(&s->terminate)) + break; /* RX */ while ((skb = skb_dequeue(&sk->sk_receive_queue))) { skb_orphan(skb); @@ -504,7 +506,7 @@ static int bnep_session(void *arg) schedule(); } - set_current_state(TASK_RUNNING); + __set_current_state(TASK_RUNNING); remove_wait_queue(sk_sleep(sk), &wait); /* Cleanup session */ @@ -640,9 +642,10 @@ int bnep_del_connection(struct bnep_conndel_req *req) down_read(&bnep_session_sem); s = __bnep_get_session(req->dst); - if (s) - kthread_stop(s->task); - else + if (s) { + atomic_inc(&s->terminate); + wake_up_process(s->task); + } else err = -ENOENT; up_read(&bnep_session_sem); diff --git a/net/bluetooth/cmtp/capi.c b/net/bluetooth/cmtp/capi.c index 040f67b1297..50f0d135eb8 100644 --- a/net/bluetooth/cmtp/capi.c +++ b/net/bluetooth/cmtp/capi.c @@ -386,7 +386,8 @@ static void cmtp_reset_ctr(struct capi_ctr *ctrl) capi_ctr_down(ctrl); - kthread_stop(session->task); + atomic_inc(&session->terminate); + wake_up_process(session->task); } static void cmtp_register_appl(struct capi_ctr *ctrl, __u16 appl, capi_register_params *rp) diff --git a/net/bluetooth/cmtp/cmtp.h b/net/bluetooth/cmtp/cmtp.h index db43b54ac9a..c32638dddbf 100644 --- a/net/bluetooth/cmtp/cmtp.h +++ b/net/bluetooth/cmtp/cmtp.h @@ -81,6 +81,7 @@ struct cmtp_session { char name[BTNAMSIZ]; + atomic_t terminate; struct task_struct *task; wait_queue_head_t wait; diff --git a/net/bluetooth/cmtp/core.c b/net/bluetooth/cmtp/core.c index c5b11af908b..521baa4fe83 100644 --- a/net/bluetooth/cmtp/core.c +++ b/net/bluetooth/cmtp/core.c @@ -292,9 +292,11 @@ static int cmtp_session(void *arg) init_waitqueue_entry(&wait, current); add_wait_queue(sk_sleep(sk), &wait); - while (!kthread_should_stop()) { + while (1) { set_current_state(TASK_INTERRUPTIBLE); + if (atomic_read(&session->terminate)) + break; if (sk->sk_state != BT_CONNECTED) break; @@ -307,7 +309,7 @@ static int cmtp_session(void *arg) schedule(); } - set_current_state(TASK_RUNNING); + __set_current_state(TASK_RUNNING); remove_wait_queue(sk_sleep(sk), &wait); down_write(&cmtp_session_sem); @@ -380,16 +382,17 @@ int cmtp_add_connection(struct cmtp_connadd_req *req, struct socket *sock) if (!(session->flags & (1 << CMTP_LOOPBACK))) { err = cmtp_attach_device(session); - if (err < 0) - goto detach; + if (err < 0) { + atomic_inc(&session->terminate); + wake_up_process(session->task); + up_write(&cmtp_session_sem); + return err; + } } up_write(&cmtp_session_sem); return 0; -detach: - cmtp_detach_device(session); - unlink: __cmtp_unlink_session(session); @@ -414,7 +417,8 @@ int cmtp_del_connection(struct cmtp_conndel_req *req) skb_queue_purge(&session->transmit); /* Stop session thread */ - kthread_stop(session->task); + atomic_inc(&session->terminate); + wake_up_process(session->task); } else err = -ENOENT; diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index ec0bc3f60f2..56943add45c 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -1209,7 +1209,6 @@ static void hci_cmd_timer(unsigned long arg) BT_ERR("%s command tx timeout", hdev->name); atomic_set(&hdev->cmd_cnt, 1); - clear_bit(HCI_RESET, &hdev->flags); tasklet_schedule(&hdev->cmd_task); } @@ -1327,7 +1326,7 @@ int hci_blacklist_add(struct hci_dev *hdev, bdaddr_t *bdaddr) entry = kzalloc(sizeof(struct bdaddr_list), GFP_KERNEL); if (!entry) { - return -ENOMEM; + err = -ENOMEM; goto err; } @@ -2408,7 +2407,10 @@ static void hci_cmd_task(unsigned long arg) if (hdev->sent_cmd) { atomic_dec(&hdev->cmd_cnt); hci_send_frame(skb); - mod_timer(&hdev->cmd_timer, + if (test_bit(HCI_RESET, &hdev->flags)) + del_timer(&hdev->cmd_timer); + else + mod_timer(&hdev->cmd_timer, jiffies + msecs_to_jiffies(HCI_CMD_TIMEOUT)); } else { skb_queue_head(&hdev->cmd_q, skb); diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index a40170e022e..7ef4eb4435f 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -58,8 +58,8 @@ static void hci_cc_inquiry_cancel(struct hci_dev *hdev, struct sk_buff *skb) if (status) return; - if (test_bit(HCI_MGMT, &hdev->flags) && - test_and_clear_bit(HCI_INQUIRY, &hdev->flags)) + if (test_and_clear_bit(HCI_INQUIRY, &hdev->flags) && + test_bit(HCI_MGMT, &hdev->flags)) mgmt_discovering(hdev->id, 0); hci_req_complete(hdev, HCI_OP_INQUIRY_CANCEL, status); @@ -76,8 +76,8 @@ static void hci_cc_exit_periodic_inq(struct hci_dev *hdev, struct sk_buff *skb) if (status) return; - if (test_bit(HCI_MGMT, &hdev->flags) && - test_and_clear_bit(HCI_INQUIRY, &hdev->flags)) + if (test_and_clear_bit(HCI_INQUIRY, &hdev->flags) && + test_bit(HCI_MGMT, &hdev->flags)) mgmt_discovering(hdev->id, 0); hci_conn_check_pending(hdev); @@ -959,9 +959,8 @@ static inline void hci_cs_inquiry(struct hci_dev *hdev, __u8 status) return; } - if (test_bit(HCI_MGMT, &hdev->flags) && - !test_and_set_bit(HCI_INQUIRY, - &hdev->flags)) + if (!test_and_set_bit(HCI_INQUIRY, &hdev->flags) && + test_bit(HCI_MGMT, &hdev->flags)) mgmt_discovering(hdev->id, 1); } @@ -1340,8 +1339,8 @@ static inline void hci_inquiry_complete_evt(struct hci_dev *hdev, struct sk_buff BT_DBG("%s status %d", hdev->name, status); - if (test_bit(HCI_MGMT, &hdev->flags) && - test_and_clear_bit(HCI_INQUIRY, &hdev->flags)) + if (test_and_clear_bit(HCI_INQUIRY, &hdev->flags) && + test_bit(HCI_MGMT, &hdev->flags)) mgmt_discovering(hdev->id, 0); hci_req_complete(hdev, HCI_OP_INQUIRY, status); diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c index 43b4c2deb7c..fb68f344c34 100644 --- a/net/bluetooth/hidp/core.c +++ b/net/bluetooth/hidp/core.c @@ -764,6 +764,7 @@ static int hidp_session(void *arg) up_write(&hidp_session_sem); + kfree(session->rd_data); kfree(session); return 0; } @@ -841,7 +842,8 @@ static int hidp_setup_input(struct hidp_session *session, err = input_register_device(input); if (err < 0) { - hci_conn_put_device(session->conn); + input_free_device(input); + session->input = NULL; return err; } @@ -1044,8 +1046,12 @@ int hidp_add_connection(struct hidp_connadd_req *req, struct socket *ctrl_sock, } err = hid_add_device(session->hid); - if (err < 0) - goto err_add_device; + if (err < 0) { + atomic_inc(&session->terminate); + wake_up_process(session->task); + up_write(&hidp_session_sem); + return err; + } if (session->input) { hidp_send_ctrl_message(session, @@ -1059,12 +1065,6 @@ int hidp_add_connection(struct hidp_connadd_req *req, struct socket *ctrl_sock, up_write(&hidp_session_sem); return 0; -err_add_device: - hid_destroy_device(session->hid); - session->hid = NULL; - atomic_inc(&session->terminate); - wake_up_process(session->task); - unlink: hidp_del_timer(session); @@ -1090,7 +1090,6 @@ purge: failed: up_write(&hidp_session_sem); - input_free_device(session->input); kfree(session); return err; } diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index 3204ba8a701..b3bdb482bbe 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -1159,9 +1159,8 @@ int __l2cap_wait_ack(struct sock *sk) int timeo = HZ/5; add_wait_queue(sk_sleep(sk), &wait); - while ((chan->unacked_frames > 0 && chan->conn)) { - set_current_state(TASK_INTERRUPTIBLE); - + set_current_state(TASK_INTERRUPTIBLE); + while (chan->unacked_frames > 0 && chan->conn) { if (!timeo) timeo = HZ/5; @@ -1173,6 +1172,7 @@ int __l2cap_wait_ack(struct sock *sk) release_sock(sk); timeo = schedule_timeout(timeo); lock_sock(sk); + set_current_state(TASK_INTERRUPTIBLE); err = sock_error(sk); if (err) diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c index 5c36b3e8739..61f1f623091 100644 --- a/net/bluetooth/l2cap_sock.c +++ b/net/bluetooth/l2cap_sock.c @@ -235,30 +235,26 @@ static int l2cap_sock_accept(struct socket *sock, struct socket *newsock, int fl lock_sock_nested(sk, SINGLE_DEPTH_NESTING); - if (sk->sk_state != BT_LISTEN) { - err = -EBADFD; - goto done; - } - timeo = sock_rcvtimeo(sk, flags & O_NONBLOCK); BT_DBG("sk %p timeo %ld", sk, timeo); /* Wait for an incoming connection. (wake-one). */ add_wait_queue_exclusive(sk_sleep(sk), &wait); - while (!(nsk = bt_accept_dequeue(sk, newsock))) { + while (1) { set_current_state(TASK_INTERRUPTIBLE); - if (!timeo) { - err = -EAGAIN; + + if (sk->sk_state != BT_LISTEN) { + err = -EBADFD; break; } - release_sock(sk); - timeo = schedule_timeout(timeo); - lock_sock_nested(sk, SINGLE_DEPTH_NESTING); + nsk = bt_accept_dequeue(sk, newsock); + if (nsk) + break; - if (sk->sk_state != BT_LISTEN) { - err = -EBADFD; + if (!timeo) { + err = -EAGAIN; break; } @@ -266,8 +262,12 @@ static int l2cap_sock_accept(struct socket *sock, struct socket *newsock, int fl err = sock_intr_errno(timeo); break; } + + release_sock(sk); + timeo = schedule_timeout(timeo); + lock_sock_nested(sk, SINGLE_DEPTH_NESTING); } - set_current_state(TASK_RUNNING); + __set_current_state(TASK_RUNNING); remove_wait_queue(sk_sleep(sk), &wait); if (err) @@ -993,7 +993,7 @@ static struct sock *l2cap_sock_alloc(struct net *net, struct socket *sock, int p INIT_LIST_HEAD(&bt_sk(sk)->accept_q); sk->sk_destruct = l2cap_sock_destruct; - sk->sk_sndtimeo = msecs_to_jiffies(L2CAP_CONN_TIMEOUT); + sk->sk_sndtimeo = L2CAP_CONN_TIMEOUT; sock_reset_flag(sk, SOCK_ZAPPED); diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c index 5759bb7054f..5ba3f6df665 100644 --- a/net/bluetooth/rfcomm/core.c +++ b/net/bluetooth/rfcomm/core.c @@ -62,7 +62,6 @@ static DEFINE_MUTEX(rfcomm_mutex); #define rfcomm_lock() mutex_lock(&rfcomm_mutex) #define rfcomm_unlock() mutex_unlock(&rfcomm_mutex) -static unsigned long rfcomm_event; static LIST_HEAD(session_list); @@ -120,7 +119,6 @@ static inline void rfcomm_schedule(void) { if (!rfcomm_thread) return; - set_bit(RFCOMM_SCHED_WAKEUP, &rfcomm_event); wake_up_process(rfcomm_thread); } @@ -2038,19 +2036,18 @@ static int rfcomm_run(void *unused) rfcomm_add_listener(BDADDR_ANY); - while (!kthread_should_stop()) { + while (1) { set_current_state(TASK_INTERRUPTIBLE); - if (!test_bit(RFCOMM_SCHED_WAKEUP, &rfcomm_event)) { - /* No pending events. Let's sleep. - * Incoming connections and data will wake us up. */ - schedule(); - } - set_current_state(TASK_RUNNING); + + if (kthread_should_stop()) + break; /* Process stuff */ - clear_bit(RFCOMM_SCHED_WAKEUP, &rfcomm_event); rfcomm_process_sessions(); + + schedule(); } + __set_current_state(TASK_RUNNING); rfcomm_kill_listener(); diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c index 8f01e6b11a7..482722bbc7a 100644 --- a/net/bluetooth/rfcomm/sock.c +++ b/net/bluetooth/rfcomm/sock.c @@ -485,11 +485,6 @@ static int rfcomm_sock_accept(struct socket *sock, struct socket *newsock, int f lock_sock(sk); - if (sk->sk_state != BT_LISTEN) { - err = -EBADFD; - goto done; - } - if (sk->sk_type != SOCK_STREAM) { err = -EINVAL; goto done; @@ -501,19 +496,20 @@ static int rfcomm_sock_accept(struct socket *sock, struct socket *newsock, int f /* Wait for an incoming connection. (wake-one). */ add_wait_queue_exclusive(sk_sleep(sk), &wait); - while (!(nsk = bt_accept_dequeue(sk, newsock))) { + while (1) { set_current_state(TASK_INTERRUPTIBLE); - if (!timeo) { - err = -EAGAIN; + + if (sk->sk_state != BT_LISTEN) { + err = -EBADFD; break; } - release_sock(sk); - timeo = schedule_timeout(timeo); - lock_sock(sk); + nsk = bt_accept_dequeue(sk, newsock); + if (nsk) + break; - if (sk->sk_state != BT_LISTEN) { - err = -EBADFD; + if (!timeo) { + err = -EAGAIN; break; } @@ -521,8 +517,12 @@ static int rfcomm_sock_accept(struct socket *sock, struct socket *newsock, int f err = sock_intr_errno(timeo); break; } + + release_sock(sk); + timeo = schedule_timeout(timeo); + lock_sock(sk); } - set_current_state(TASK_RUNNING); + __set_current_state(TASK_RUNNING); remove_wait_queue(sk_sleep(sk), &wait); if (err) diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c index 4c3621b5e0a..8270f05e3f1 100644 --- a/net/bluetooth/sco.c +++ b/net/bluetooth/sco.c @@ -564,30 +564,26 @@ static int sco_sock_accept(struct socket *sock, struct socket *newsock, int flag lock_sock(sk); - if (sk->sk_state != BT_LISTEN) { - err = -EBADFD; - goto done; - } - timeo = sock_rcvtimeo(sk, flags & O_NONBLOCK); BT_DBG("sk %p timeo %ld", sk, timeo); /* Wait for an incoming connection. (wake-one). */ add_wait_queue_exclusive(sk_sleep(sk), &wait); - while (!(ch = bt_accept_dequeue(sk, newsock))) { + while (1) { set_current_state(TASK_INTERRUPTIBLE); - if (!timeo) { - err = -EAGAIN; + + if (sk->sk_state != BT_LISTEN) { + err = -EBADFD; break; } - release_sock(sk); - timeo = schedule_timeout(timeo); - lock_sock(sk); + ch = bt_accept_dequeue(sk, newsock); + if (ch) + break; - if (sk->sk_state != BT_LISTEN) { - err = -EBADFD; + if (!timeo) { + err = -EAGAIN; break; } @@ -595,8 +591,12 @@ static int sco_sock_accept(struct socket *sock, struct socket *newsock, int flag err = sock_intr_errno(timeo); break; } + + release_sock(sk); + timeo = schedule_timeout(timeo); + lock_sock(sk); } - set_current_state(TASK_RUNNING); + __set_current_state(TASK_RUNNING); remove_wait_queue(sk_sleep(sk), &wait); if (err) diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c index 2cdf0070419..e73815456ad 100644 --- a/net/bridge/br_if.c +++ b/net/bridge/br_if.c @@ -231,6 +231,7 @@ static struct net_bridge_port *new_nbp(struct net_bridge *br, int br_add_bridge(struct net *net, const char *name) { struct net_device *dev; + int res; dev = alloc_netdev(sizeof(struct net_bridge), name, br_dev_setup); @@ -240,7 +241,10 @@ int br_add_bridge(struct net *net, const char *name) dev_net_set(dev, net); - return register_netdev(dev); + res = register_netdev(dev); + if (res) + free_netdev(dev); + return res; } int br_del_bridge(struct net *net, const char *name) diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c index 2d85ca7111d..995cbe0ac0b 100644 --- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -1456,7 +1456,7 @@ static int br_multicast_ipv6_rcv(struct net_bridge *br, { struct sk_buff *skb2; const struct ipv6hdr *ip6h; - struct icmp6hdr *icmp6h; + u8 icmp6_type; u8 nexthdr; unsigned len; int offset; @@ -1502,9 +1502,9 @@ static int br_multicast_ipv6_rcv(struct net_bridge *br, __skb_pull(skb2, offset); skb_reset_transport_header(skb2); - icmp6h = icmp6_hdr(skb2); + icmp6_type = icmp6_hdr(skb2)->icmp6_type; - switch (icmp6h->icmp6_type) { + switch (icmp6_type) { case ICMPV6_MGM_QUERY: case ICMPV6_MGM_REPORT: case ICMPV6_MGM_REDUCTION: @@ -1520,16 +1520,23 @@ static int br_multicast_ipv6_rcv(struct net_bridge *br, err = pskb_trim_rcsum(skb2, len); if (err) goto out; + err = -EINVAL; } + ip6h = ipv6_hdr(skb2); + switch (skb2->ip_summed) { case CHECKSUM_COMPLETE: - if (!csum_fold(skb2->csum)) + if (!csum_ipv6_magic(&ip6h->saddr, &ip6h->daddr, skb2->len, + IPPROTO_ICMPV6, skb2->csum)) break; /*FALLTHROUGH*/ case CHECKSUM_NONE: - skb2->csum = 0; - if (skb_checksum_complete(skb2)) + skb2->csum = ~csum_unfold(csum_ipv6_magic(&ip6h->saddr, + &ip6h->daddr, + skb2->len, + IPPROTO_ICMPV6, 0)); + if (__skb_checksum_complete(skb2)) goto out; } @@ -1537,7 +1544,7 @@ static int br_multicast_ipv6_rcv(struct net_bridge *br, BR_INPUT_SKB_CB(skb)->igmp = 1; - switch (icmp6h->icmp6_type) { + switch (icmp6_type) { case ICMPV6_MGM_REPORT: { struct mld_msg *mld; diff --git a/net/bridge/netfilter/Kconfig b/net/bridge/netfilter/Kconfig index ba6f73eb06c..a9aff9c7d02 100644 --- a/net/bridge/netfilter/Kconfig +++ b/net/bridge/netfilter/Kconfig @@ -4,7 +4,7 @@ menuconfig BRIDGE_NF_EBTABLES tristate "Ethernet Bridge tables (ebtables) support" - depends on BRIDGE && BRIDGE_NETFILTER + depends on BRIDGE && NETFILTER select NETFILTER_XTABLES help ebtables is a general, extensible frame/packet identification diff --git a/net/caif/caif_dev.c b/net/caif/caif_dev.c index 7c2fa0a0814..7f9ac0742d1 100644 --- a/net/caif/caif_dev.c +++ b/net/caif/caif_dev.c @@ -93,10 +93,14 @@ static struct caif_device_entry *caif_device_alloc(struct net_device *dev) caifdevs = caif_device_list(dev_net(dev)); BUG_ON(!caifdevs); - caifd = kzalloc(sizeof(*caifd), GFP_ATOMIC); + caifd = kzalloc(sizeof(*caifd), GFP_KERNEL); if (!caifd) return NULL; caifd->pcpu_refcnt = alloc_percpu(int); + if (!caifd->pcpu_refcnt) { + kfree(caifd); + return NULL; + } caifd->netdev = dev; dev_hold(dev); return caifd; diff --git a/net/can/af_can.c b/net/can/af_can.c index 8ce926d3b2c..9b0c32a2690 100644 --- a/net/can/af_can.c +++ b/net/can/af_can.c @@ -857,7 +857,7 @@ static __exit void can_exit(void) struct net_device *dev; if (stats_timer) - del_timer(&can_stattimer); + del_timer_sync(&can_stattimer); can_remove_proc(); diff --git a/net/ceph/msgpool.c b/net/ceph/msgpool.c index d5f2d97ac05..1f4cb30a42c 100644 --- a/net/ceph/msgpool.c +++ b/net/ceph/msgpool.c @@ -7,27 +7,37 @@ #include <linux/ceph/msgpool.h> -static void *alloc_fn(gfp_t gfp_mask, void *arg) +static void *msgpool_alloc(gfp_t gfp_mask, void *arg) { struct ceph_msgpool *pool = arg; - void *p; + struct ceph_msg *msg; - p = ceph_msg_new(0, pool->front_len, gfp_mask); - if (!p) - pr_err("msgpool %s alloc failed\n", pool->name); - return p; + msg = ceph_msg_new(0, pool->front_len, gfp_mask); + if (!msg) { + dout("msgpool_alloc %s failed\n", pool->name); + } else { + dout("msgpool_alloc %s %p\n", pool->name, msg); + msg->pool = pool; + } + return msg; } -static void free_fn(void *element, void *arg) +static void msgpool_free(void *element, void *arg) { - ceph_msg_put(element); + struct ceph_msgpool *pool = arg; + struct ceph_msg *msg = element; + + dout("msgpool_release %s %p\n", pool->name, msg); + msg->pool = NULL; + ceph_msg_put(msg); } int ceph_msgpool_init(struct ceph_msgpool *pool, int front_len, int size, bool blocking, const char *name) { + dout("msgpool %s init\n", name); pool->front_len = front_len; - pool->pool = mempool_create(size, alloc_fn, free_fn, pool); + pool->pool = mempool_create(size, msgpool_alloc, msgpool_free, pool); if (!pool->pool) return -ENOMEM; pool->name = name; @@ -36,14 +46,17 @@ int ceph_msgpool_init(struct ceph_msgpool *pool, void ceph_msgpool_destroy(struct ceph_msgpool *pool) { + dout("msgpool %s destroy\n", pool->name); mempool_destroy(pool->pool); } struct ceph_msg *ceph_msgpool_get(struct ceph_msgpool *pool, int front_len) { + struct ceph_msg *msg; + if (front_len > pool->front_len) { - pr_err("msgpool_get pool %s need front %d, pool size is %d\n", + dout("msgpool_get %s need front %d, pool size is %d\n", pool->name, front_len, pool->front_len); WARN_ON(1); @@ -51,14 +64,19 @@ struct ceph_msg *ceph_msgpool_get(struct ceph_msgpool *pool, return ceph_msg_new(0, front_len, GFP_NOFS); } - return mempool_alloc(pool->pool, GFP_NOFS); + msg = mempool_alloc(pool->pool, GFP_NOFS); + dout("msgpool_get %s %p\n", pool->name, msg); + return msg; } void ceph_msgpool_put(struct ceph_msgpool *pool, struct ceph_msg *msg) { + dout("msgpool_put %s %p\n", pool->name, msg); + /* reset msg front_len; user may have changed it */ msg->front.iov_len = pool->front_len; msg->hdr.front_len = cpu_to_le32(pool->front_len); kref_init(&msg->kref); /* retake single ref */ + mempool_free(msg, pool->pool); } diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c index ce310eee708..16836a7df7a 100644 --- a/net/ceph/osd_client.c +++ b/net/ceph/osd_client.c @@ -685,6 +685,18 @@ static void __remove_osd(struct ceph_osd_client *osdc, struct ceph_osd *osd) put_osd(osd); } +static void remove_all_osds(struct ceph_osd_client *osdc) +{ + dout("__remove_old_osds %p\n", osdc); + mutex_lock(&osdc->request_mutex); + while (!RB_EMPTY_ROOT(&osdc->osds)) { + struct ceph_osd *osd = rb_entry(rb_first(&osdc->osds), + struct ceph_osd, o_node); + __remove_osd(osdc, osd); + } + mutex_unlock(&osdc->request_mutex); +} + static void __move_osd_to_lru(struct ceph_osd_client *osdc, struct ceph_osd *osd) { @@ -701,14 +713,14 @@ static void __remove_osd_from_lru(struct ceph_osd *osd) list_del_init(&osd->o_osd_lru); } -static void remove_old_osds(struct ceph_osd_client *osdc, int remove_all) +static void remove_old_osds(struct ceph_osd_client *osdc) { struct ceph_osd *osd, *nosd; dout("__remove_old_osds %p\n", osdc); mutex_lock(&osdc->request_mutex); list_for_each_entry_safe(osd, nosd, &osdc->osd_lru, o_osd_lru) { - if (!remove_all && time_before(jiffies, osd->lru_ttl)) + if (time_before(jiffies, osd->lru_ttl)) break; __remove_osd(osdc, osd); } @@ -751,6 +763,7 @@ static void __insert_osd(struct ceph_osd_client *osdc, struct ceph_osd *new) struct rb_node *parent = NULL; struct ceph_osd *osd = NULL; + dout("__insert_osd %p osd%d\n", new, new->o_osd); while (*p) { parent = *p; osd = rb_entry(parent, struct ceph_osd, o_node); @@ -1144,7 +1157,7 @@ static void handle_osds_timeout(struct work_struct *work) dout("osds timeout\n"); down_read(&osdc->map_sem); - remove_old_osds(osdc, 0); + remove_old_osds(osdc); up_read(&osdc->map_sem); schedule_delayed_work(&osdc->osds_timeout_work, @@ -1862,8 +1875,7 @@ void ceph_osdc_stop(struct ceph_osd_client *osdc) ceph_osdmap_destroy(osdc->osdmap); osdc->osdmap = NULL; } - remove_old_osds(osdc, 1); - WARN_ON(!RB_EMPTY_ROOT(&osdc->osds)); + remove_all_osds(osdc); mempool_destroy(osdc->req_mempool); ceph_msgpool_destroy(&osdc->msgpool_op); ceph_msgpool_destroy(&osdc->msgpool_op_reply); diff --git a/net/core/dev.c b/net/core/dev.c index 17d67b579be..b10ff0a7185 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1515,6 +1515,14 @@ static inline bool is_skb_forwardable(struct net_device *dev, */ int dev_forward_skb(struct net_device *dev, struct sk_buff *skb) { + if (skb_shinfo(skb)->tx_flags & SKBTX_DEV_ZEROCOPY) { + if (skb_copy_ubufs(skb, GFP_ATOMIC)) { + atomic_long_inc(&dev->rx_dropped); + kfree_skb(skb); + return NET_RX_DROP; + } + } + skb_orphan(skb); nf_reset(skb); diff --git a/net/core/fib_rules.c b/net/core/fib_rules.c index e7ab0c0285b..3231b468bb7 100644 --- a/net/core/fib_rules.c +++ b/net/core/fib_rules.c @@ -384,8 +384,8 @@ static int fib_nl_newrule(struct sk_buff *skb, struct nlmsghdr* nlh, void *arg) */ list_for_each_entry(r, &ops->rules_list, list) { if (r->action == FR_ACT_GOTO && - r->target == rule->pref) { - BUG_ON(rtnl_dereference(r->ctarget) != NULL); + r->target == rule->pref && + rtnl_dereference(r->ctarget) == NULL) { rcu_assign_pointer(r->ctarget, rule); if (--ops->unresolved_rules == 0) break; diff --git a/net/core/flow.c b/net/core/flow.c index bf32c33cad3..555a456efb0 100644 --- a/net/core/flow.c +++ b/net/core/flow.c @@ -30,6 +30,7 @@ struct flow_cache_entry { struct hlist_node hlist; struct list_head gc_list; } u; + struct net *net; u16 family; u8 dir; u32 genid; @@ -172,29 +173,26 @@ static void flow_new_hash_rnd(struct flow_cache *fc, static u32 flow_hash_code(struct flow_cache *fc, struct flow_cache_percpu *fcp, - const struct flowi *key) + const struct flowi *key, + size_t keysize) { const u32 *k = (const u32 *) key; + const u32 length = keysize * sizeof(flow_compare_t) / sizeof(u32); - return jhash2(k, (sizeof(*key) / sizeof(u32)), fcp->hash_rnd) + return jhash2(k, length, fcp->hash_rnd) & (flow_cache_hash_size(fc) - 1); } -typedef unsigned long flow_compare_t; - /* I hear what you're saying, use memcmp. But memcmp cannot make - * important assumptions that we can here, such as alignment and - * constant size. + * important assumptions that we can here, such as alignment. */ -static int flow_key_compare(const struct flowi *key1, const struct flowi *key2) +static int flow_key_compare(const struct flowi *key1, const struct flowi *key2, + size_t keysize) { const flow_compare_t *k1, *k1_lim, *k2; - const int n_elem = sizeof(struct flowi) / sizeof(flow_compare_t); - - BUILD_BUG_ON(sizeof(struct flowi) % sizeof(flow_compare_t)); k1 = (const flow_compare_t *) key1; - k1_lim = k1 + n_elem; + k1_lim = k1 + keysize; k2 = (const flow_compare_t *) key2; @@ -215,6 +213,7 @@ flow_cache_lookup(struct net *net, const struct flowi *key, u16 family, u8 dir, struct flow_cache_entry *fle, *tfle; struct hlist_node *entry; struct flow_cache_object *flo; + size_t keysize; unsigned int hash; local_bh_disable(); @@ -222,6 +221,11 @@ flow_cache_lookup(struct net *net, const struct flowi *key, u16 family, u8 dir, fle = NULL; flo = NULL; + + keysize = flow_key_size(family); + if (!keysize) + goto nocache; + /* Packet really early in init? Making flow_cache_init a * pre-smp initcall would solve this. --RR */ if (!fcp->hash_table) @@ -230,11 +234,12 @@ flow_cache_lookup(struct net *net, const struct flowi *key, u16 family, u8 dir, if (fcp->hash_rnd_recalc) flow_new_hash_rnd(fc, fcp); - hash = flow_hash_code(fc, fcp, key); + hash = flow_hash_code(fc, fcp, key, keysize); hlist_for_each_entry(tfle, entry, &fcp->hash_table[hash], u.hlist) { - if (tfle->family == family && + if (tfle->net == net && + tfle->family == family && tfle->dir == dir && - flow_key_compare(key, &tfle->key) == 0) { + flow_key_compare(key, &tfle->key, keysize) == 0) { fle = tfle; break; } @@ -246,9 +251,10 @@ flow_cache_lookup(struct net *net, const struct flowi *key, u16 family, u8 dir, fle = kmem_cache_alloc(flow_cachep, GFP_ATOMIC); if (fle) { + fle->net = net; fle->family = family; fle->dir = dir; - memcpy(&fle->key, key, sizeof(*key)); + memcpy(&fle->key, key, keysize * sizeof(flow_compare_t)); fle->object = NULL; hlist_add_head(&fle->u.hlist, &fcp->hash_table[hash]); fcp->hash_count++; diff --git a/net/core/neighbour.c b/net/core/neighbour.c index 8fab9b0bb20..1334d7e56f0 100644 --- a/net/core/neighbour.c +++ b/net/core/neighbour.c @@ -1319,11 +1319,15 @@ static void neigh_proxy_process(unsigned long arg) if (tdif <= 0) { struct net_device *dev = skb->dev; + __skb_unlink(skb, &tbl->proxy_queue); - if (tbl->proxy_redo && netif_running(dev)) + if (tbl->proxy_redo && netif_running(dev)) { + rcu_read_lock(); tbl->proxy_redo(skb); - else + rcu_read_unlock(); + } else { kfree_skb(skb); + } dev_put(dev); } else if (!sched_next || tdif < sched_next) diff --git a/net/core/netpoll.c b/net/core/netpoll.c index adf84dd8c7b..52622517e0d 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -558,13 +558,14 @@ int __netpoll_rx(struct sk_buff *skb) if (skb_shared(skb)) goto out; - iph = (struct iphdr *)skb->data; if (!pskb_may_pull(skb, sizeof(struct iphdr))) goto out; + iph = (struct iphdr *)skb->data; if (iph->ihl < 5 || iph->version != 4) goto out; if (!pskb_may_pull(skb, iph->ihl*4)) goto out; + iph = (struct iphdr *)skb->data; if (ip_fast_csum((u8 *)iph, iph->ihl) != 0) goto out; @@ -579,6 +580,7 @@ int __netpoll_rx(struct sk_buff *skb) if (pskb_trim_rcsum(skb, len)) goto out; + iph = (struct iphdr *)skb->data; if (iph->protocol != IPPROTO_UDP) goto out; diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 27002dffe7e..387703f56fc 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -611,8 +611,21 @@ struct sk_buff *skb_morph(struct sk_buff *dst, struct sk_buff *src) } EXPORT_SYMBOL_GPL(skb_morph); -/* skb frags copy userspace buffers to kernel */ -static int skb_copy_ubufs(struct sk_buff *skb, gfp_t gfp_mask) +/* skb_copy_ubufs - copy userspace skb frags buffers to kernel + * @skb: the skb to modify + * @gfp_mask: allocation priority + * + * This must be called on SKBTX_DEV_ZEROCOPY skb. + * It will copy all frags into kernel and drop the reference + * to userspace pages. + * + * If this function is called from an interrupt gfp_mask() must be + * %GFP_ATOMIC. + * + * Returns 0 on success or a negative error code on failure + * to allocate kernel memory to copy to. + */ +int skb_copy_ubufs(struct sk_buff *skb, gfp_t gfp_mask) { int i; int num_frags = skb_shinfo(skb)->nr_frags; @@ -652,6 +665,8 @@ static int skb_copy_ubufs(struct sk_buff *skb, gfp_t gfp_mask) skb_shinfo(skb)->frags[i - 1].page = head; head = (struct page *)head->private; } + + skb_shinfo(skb)->tx_flags &= ~SKBTX_DEV_ZEROCOPY; return 0; } @@ -677,7 +692,6 @@ struct sk_buff *skb_clone(struct sk_buff *skb, gfp_t gfp_mask) if (skb_shinfo(skb)->tx_flags & SKBTX_DEV_ZEROCOPY) { if (skb_copy_ubufs(skb, gfp_mask)) return NULL; - skb_shinfo(skb)->tx_flags &= ~SKBTX_DEV_ZEROCOPY; } n = skb + 1; @@ -803,7 +817,6 @@ struct sk_buff *pskb_copy(struct sk_buff *skb, gfp_t gfp_mask) n = NULL; goto out; } - skb_shinfo(skb)->tx_flags &= ~SKBTX_DEV_ZEROCOPY; } for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { skb_shinfo(n)->frags[i] = skb_shinfo(skb)->frags[i]; @@ -896,7 +909,6 @@ int pskb_expand_head(struct sk_buff *skb, int nhead, int ntail, if (skb_shinfo(skb)->tx_flags & SKBTX_DEV_ZEROCOPY) { if (skb_copy_ubufs(skb, gfp_mask)) goto nofrags; - skb_shinfo(skb)->tx_flags &= ~SKBTX_DEV_ZEROCOPY; } for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) get_page(skb_shinfo(skb)->frags[i].page); diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c index 27997d35ebd..a2468363978 100644 --- a/net/ethernet/eth.c +++ b/net/ethernet/eth.c @@ -340,7 +340,7 @@ void ether_setup(struct net_device *dev) dev->addr_len = ETH_ALEN; dev->tx_queue_len = 1000; /* Ethernet wants good queues */ dev->flags = IFF_BROADCAST|IFF_MULTICAST; - dev->priv_flags = IFF_TX_SKB_SHARING; + dev->priv_flags |= IFF_TX_SKB_SHARING; memset(dev->broadcast, 0xFF, ETH_ALEN); diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c index 1b745d412cf..dd2b9478ddd 100644 --- a/net/ipv4/af_inet.c +++ b/net/ipv4/af_inet.c @@ -466,8 +466,13 @@ int inet_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len) goto out; if (addr->sin_family != AF_INET) { + /* Compatibility games : accept AF_UNSPEC (mapped to AF_INET) + * only if s_addr is INADDR_ANY. + */ err = -EAFNOSUPPORT; - goto out; + if (addr->sin_family != AF_UNSPEC || + addr->sin_addr.s_addr != htonl(INADDR_ANY)) + goto out; } chk_addr_ret = inet_addr_type(sock_net(sk), addr->sin_addr.s_addr); diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c index 33e2c35b74b..80106d89d54 100644 --- a/net/ipv4/fib_semantics.c +++ b/net/ipv4/fib_semantics.c @@ -142,6 +142,14 @@ const struct fib_prop fib_props[RTN_MAX + 1] = { }; /* Release a nexthop info record */ +static void free_fib_info_rcu(struct rcu_head *head) +{ + struct fib_info *fi = container_of(head, struct fib_info, rcu); + + if (fi->fib_metrics != (u32 *) dst_default_metrics) + kfree(fi->fib_metrics); + kfree(fi); +} void free_fib_info(struct fib_info *fi) { @@ -156,7 +164,7 @@ void free_fib_info(struct fib_info *fi) } endfor_nexthops(fi); fib_info_cnt--; release_net(fi->fib_net); - kfree_rcu(fi, rcu); + call_rcu(&fi->rcu, free_fib_info_rcu); } void fib_release_info(struct fib_info *fi) diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c index 283c0a26e03..d577199eabd 100644 --- a/net/ipv4/igmp.c +++ b/net/ipv4/igmp.c @@ -767,7 +767,7 @@ static int igmp_xmarksources(struct ip_mc_list *pmc, int nsrcs, __be32 *srcs) break; for (i=0; i<nsrcs; i++) { /* skip inactive filters */ - if (pmc->sfcount[MCAST_INCLUDE] || + if (psf->sf_count[MCAST_INCLUDE] || pmc->sfcount[MCAST_EXCLUDE] != psf->sf_count[MCAST_EXCLUDE]) continue; diff --git a/net/ipv4/netfilter/ip_queue.c b/net/ipv4/netfilter/ip_queue.c index 5c9b9d96391..e59aabd0eae 100644 --- a/net/ipv4/netfilter/ip_queue.c +++ b/net/ipv4/netfilter/ip_queue.c @@ -218,6 +218,7 @@ ipq_build_packet_message(struct nf_queue_entry *entry, int *errp) return skb; nlmsg_failure: + kfree_skb(skb); *errp = -EINVAL; printk(KERN_ERR "ip_queue: error creating packet message\n"); return NULL; @@ -313,7 +314,7 @@ ipq_set_verdict(struct ipq_verdict_msg *vmsg, unsigned int len) { struct nf_queue_entry *entry; - if (vmsg->value > NF_MAX_VERDICT) + if (vmsg->value > NF_MAX_VERDICT || vmsg->value == NF_STOLEN) return -EINVAL; entry = ipq_find_dequeue_entry(vmsg->id); @@ -358,12 +359,9 @@ ipq_receive_peer(struct ipq_peer_msg *pmsg, break; case IPQM_VERDICT: - if (pmsg->msg.verdict.value > NF_MAX_VERDICT) - status = -EINVAL; - else - status = ipq_set_verdict(&pmsg->msg.verdict, - len - sizeof(*pmsg)); - break; + status = ipq_set_verdict(&pmsg->msg.verdict, + len - sizeof(*pmsg)); + break; default: status = -EINVAL; } diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c index b14ec7d03b6..4bfad5da94f 100644 --- a/net/ipv4/proc.c +++ b/net/ipv4/proc.c @@ -254,6 +254,8 @@ static const struct snmp_mib snmp4_net_list[] = { SNMP_MIB_ITEM("TCPDeferAcceptDrop", LINUX_MIB_TCPDEFERACCEPTDROP), SNMP_MIB_ITEM("IPReversePathFilter", LINUX_MIB_IPRPFILTER), SNMP_MIB_ITEM("TCPTimeWaitOverflow", LINUX_MIB_TCPTIMEWAITOVERFLOW), + SNMP_MIB_ITEM("TCPReqQFullDoCookies", LINUX_MIB_TCPREQQFULLDOCOOKIES), + SNMP_MIB_ITEM("TCPReqQFullDrop", LINUX_MIB_TCPREQQFULLDROP), SNMP_MIB_SENTINEL }; diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index ea0d2183df4..21fab3edb92 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -1124,7 +1124,7 @@ static int tcp_is_sackblock_valid(struct tcp_sock *tp, int is_dsack, return 0; /* ...Then it's D-SACK, and must reside below snd_una completely */ - if (!after(end_seq, tp->snd_una)) + if (after(end_seq, tp->snd_una)) return 0; if (!before(start_seq, tp->undo_marker)) diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 1c12b8ec849..c34f0151394 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -808,20 +808,38 @@ static void tcp_v4_reqsk_destructor(struct request_sock *req) kfree(inet_rsk(req)->opt); } -static void syn_flood_warning(const struct sk_buff *skb) +/* + * Return 1 if a syncookie should be sent + */ +int tcp_syn_flood_action(struct sock *sk, + const struct sk_buff *skb, + const char *proto) { - const char *msg; + const char *msg = "Dropping request"; + int want_cookie = 0; + struct listen_sock *lopt; + + #ifdef CONFIG_SYN_COOKIES - if (sysctl_tcp_syncookies) + if (sysctl_tcp_syncookies) { msg = "Sending cookies"; - else + want_cookie = 1; + NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPREQQFULLDOCOOKIES); + } else #endif - msg = "Dropping request"; + NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPREQQFULLDROP); - pr_info("TCP: Possible SYN flooding on port %d. %s.\n", - ntohs(tcp_hdr(skb)->dest), msg); + lopt = inet_csk(sk)->icsk_accept_queue.listen_opt; + if (!lopt->synflood_warned) { + lopt->synflood_warned = 1; + pr_info("%s: Possible SYN flooding on port %d. %s. " + " Check SNMP counters.\n", + proto, ntohs(tcp_hdr(skb)->dest), msg); + } + return want_cookie; } +EXPORT_SYMBOL(tcp_syn_flood_action); /* * Save and compile IPv4 options into the request_sock if needed. @@ -1235,11 +1253,7 @@ int tcp_v4_conn_request(struct sock *sk, struct sk_buff *skb) __be32 saddr = ip_hdr(skb)->saddr; __be32 daddr = ip_hdr(skb)->daddr; __u32 isn = TCP_SKB_CB(skb)->when; -#ifdef CONFIG_SYN_COOKIES int want_cookie = 0; -#else -#define want_cookie 0 /* Argh, why doesn't gcc optimize this :( */ -#endif /* Never answer to SYNs send to broadcast or multicast */ if (skb_rtable(skb)->rt_flags & (RTCF_BROADCAST | RTCF_MULTICAST)) @@ -1250,14 +1264,9 @@ int tcp_v4_conn_request(struct sock *sk, struct sk_buff *skb) * evidently real one. */ if (inet_csk_reqsk_queue_is_full(sk) && !isn) { - if (net_ratelimit()) - syn_flood_warning(skb); -#ifdef CONFIG_SYN_COOKIES - if (sysctl_tcp_syncookies) { - want_cookie = 1; - } else -#endif - goto drop; + want_cookie = tcp_syn_flood_action(sk, skb, "TCP"); + if (!want_cookie) + goto drop; } /* Accept backlog is full. If we have already queued enough @@ -1303,9 +1312,7 @@ int tcp_v4_conn_request(struct sock *sk, struct sk_buff *skb) while (l-- > 0) *c++ ^= *hash_location++; -#ifdef CONFIG_SYN_COOKIES want_cookie = 0; /* not our kind of cookie */ -#endif tmp_ext.cookie_out_never = 0; /* false */ tmp_ext.cookie_plus = tmp_opt.cookie_plus; } else if (!tp->rx_opt.cookie_in_always) { diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index f012ebd87b4..12368c58606 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -374,8 +374,8 @@ static struct inet6_dev * ipv6_add_dev(struct net_device *dev) "%s(): cannot allocate memory for statistics; dev=%s.\n", __func__, dev->name)); neigh_parms_release(&nd_tbl, ndev->nd_parms); - ndev->dead = 1; - in6_dev_finish_destroy(ndev); + dev_put(dev); + kfree(ndev); return NULL; } diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c index 9ef1831746e..b46e9f88ce3 100644 --- a/net/ipv6/datagram.c +++ b/net/ipv6/datagram.c @@ -599,7 +599,7 @@ int datagram_recv_ctl(struct sock *sk, struct msghdr *msg, struct sk_buff *skb) return 0; } -int datagram_send_ctl(struct net *net, +int datagram_send_ctl(struct net *net, struct sock *sk, struct msghdr *msg, struct flowi6 *fl6, struct ipv6_txoptions *opt, int *hlimit, int *tclass, int *dontfrag) @@ -658,7 +658,8 @@ int datagram_send_ctl(struct net *net, if (addr_type != IPV6_ADDR_ANY) { int strict = __ipv6_addr_src_scope(addr_type) <= IPV6_ADDR_SCOPE_LINKLOCAL; - if (!ipv6_chk_addr(net, &src_info->ipi6_addr, + if (!inet_sk(sk)->transparent && + !ipv6_chk_addr(net, &src_info->ipi6_addr, strict ? dev : NULL, 0)) err = -EINVAL; else diff --git a/net/ipv6/ip6_flowlabel.c b/net/ipv6/ip6_flowlabel.c index f3caf1b8d57..54303945019 100644 --- a/net/ipv6/ip6_flowlabel.c +++ b/net/ipv6/ip6_flowlabel.c @@ -322,8 +322,8 @@ static int fl6_renew(struct ip6_flowlabel *fl, unsigned long linger, unsigned lo } static struct ip6_flowlabel * -fl_create(struct net *net, struct in6_flowlabel_req *freq, char __user *optval, - int optlen, int *err_p) +fl_create(struct net *net, struct sock *sk, struct in6_flowlabel_req *freq, + char __user *optval, int optlen, int *err_p) { struct ip6_flowlabel *fl = NULL; int olen; @@ -360,7 +360,7 @@ fl_create(struct net *net, struct in6_flowlabel_req *freq, char __user *optval, msg.msg_control = (void*)(fl->opt+1); memset(&flowi6, 0, sizeof(flowi6)); - err = datagram_send_ctl(net, &msg, &flowi6, fl->opt, &junk, + err = datagram_send_ctl(net, sk, &msg, &flowi6, fl->opt, &junk, &junk, &junk); if (err) goto done; @@ -528,7 +528,7 @@ int ipv6_flowlabel_opt(struct sock *sk, char __user *optval, int optlen) if (freq.flr_label & ~IPV6_FLOWLABEL_MASK) return -EINVAL; - fl = fl_create(net, &freq, optval, optlen, &err); + fl = fl_create(net, sk, &freq, optval, optlen, &err); if (fl == NULL) return err; sfl1 = kmalloc(sizeof(*sfl1), GFP_KERNEL); diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index 9cb191ecaba..2fbda5fc4cc 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -475,7 +475,7 @@ sticky_done: msg.msg_controllen = optlen; msg.msg_control = (void*)(opt+1); - retv = datagram_send_ctl(net, &msg, &fl6, opt, &junk, &junk, + retv = datagram_send_ctl(net, sk, &msg, &fl6, opt, &junk, &junk, &junk); if (retv) goto done; @@ -913,7 +913,7 @@ static int ipv6_getsockopt_sticky(struct sock *sk, struct ipv6_txoptions *opt, } static int do_ipv6_getsockopt(struct sock *sk, int level, int optname, - char __user *optval, int __user *optlen) + char __user *optval, int __user *optlen, unsigned flags) { struct ipv6_pinfo *np = inet6_sk(sk); int len; @@ -962,7 +962,7 @@ static int do_ipv6_getsockopt(struct sock *sk, int level, int optname, msg.msg_control = optval; msg.msg_controllen = len; - msg.msg_flags = 0; + msg.msg_flags = flags; lock_sock(sk); skb = np->pktoptions; @@ -1222,7 +1222,7 @@ int ipv6_getsockopt(struct sock *sk, int level, int optname, if(level != SOL_IPV6) return -ENOPROTOOPT; - err = do_ipv6_getsockopt(sk, level, optname, optval, optlen); + err = do_ipv6_getsockopt(sk, level, optname, optval, optlen, 0); #ifdef CONFIG_NETFILTER /* we need to exclude all possible ENOPROTOOPTs except default case */ if (err == -ENOPROTOOPT && optname != IPV6_2292PKTOPTIONS) { @@ -1264,7 +1264,8 @@ int compat_ipv6_getsockopt(struct sock *sk, int level, int optname, return compat_mc_getsockopt(sk, level, optname, optval, optlen, ipv6_getsockopt); - err = do_ipv6_getsockopt(sk, level, optname, optval, optlen); + err = do_ipv6_getsockopt(sk, level, optname, optval, optlen, + MSG_CMSG_COMPAT); #ifdef CONFIG_NETFILTER /* we need to exclude all possible ENOPROTOOPTs except default case */ if (err == -ENOPROTOOPT && optname != IPV6_2292PKTOPTIONS) { diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c index 3e6ebcdb477..ee7839f4d6e 100644 --- a/net/ipv6/mcast.c +++ b/net/ipv6/mcast.c @@ -1059,7 +1059,7 @@ static int mld_xmarksources(struct ifmcaddr6 *pmc, int nsrcs, break; for (i=0; i<nsrcs; i++) { /* skip inactive filters */ - if (pmc->mca_sfcount[MCAST_INCLUDE] || + if (psf->sf_count[MCAST_INCLUDE] || pmc->mca_sfcount[MCAST_EXCLUDE] != psf->sf_count[MCAST_EXCLUDE]) continue; diff --git a/net/ipv6/netfilter/ip6_queue.c b/net/ipv6/netfilter/ip6_queue.c index 24939486328..e63c3972a73 100644 --- a/net/ipv6/netfilter/ip6_queue.c +++ b/net/ipv6/netfilter/ip6_queue.c @@ -218,6 +218,7 @@ ipq_build_packet_message(struct nf_queue_entry *entry, int *errp) return skb; nlmsg_failure: + kfree_skb(skb); *errp = -EINVAL; printk(KERN_ERR "ip6_queue: error creating packet message\n"); return NULL; @@ -313,7 +314,7 @@ ipq_set_verdict(struct ipq_verdict_msg *vmsg, unsigned int len) { struct nf_queue_entry *entry; - if (vmsg->value > NF_MAX_VERDICT) + if (vmsg->value > NF_MAX_VERDICT || vmsg->value == NF_STOLEN) return -EINVAL; entry = ipq_find_dequeue_entry(vmsg->id); @@ -358,12 +359,9 @@ ipq_receive_peer(struct ipq_peer_msg *pmsg, break; case IPQM_VERDICT: - if (pmsg->msg.verdict.value > NF_MAX_VERDICT) - status = -EINVAL; - else - status = ipq_set_verdict(&pmsg->msg.verdict, - len - sizeof(*pmsg)); - break; + status = ipq_set_verdict(&pmsg->msg.verdict, + len - sizeof(*pmsg)); + break; default: status = -EINVAL; } diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c index 6a79f3081bd..343852e5c70 100644 --- a/net/ipv6/raw.c +++ b/net/ipv6/raw.c @@ -817,8 +817,8 @@ static int rawv6_sendmsg(struct kiocb *iocb, struct sock *sk, memset(opt, 0, sizeof(struct ipv6_txoptions)); opt->tot_len = sizeof(struct ipv6_txoptions); - err = datagram_send_ctl(sock_net(sk), msg, &fl6, opt, &hlimit, - &tclass, &dontfrag); + err = datagram_send_ctl(sock_net(sk), sk, msg, &fl6, opt, + &hlimit, &tclass, &dontfrag); if (err < 0) { fl6_sock_release(flowlabel); return err; diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 9e69eb0ec6d..1250f902067 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -104,6 +104,9 @@ static u32 *ipv6_cow_metrics(struct dst_entry *dst, unsigned long old) struct inet_peer *peer; u32 *p = NULL; + if (!(rt->dst.flags & DST_HOST)) + return NULL; + if (!rt->rt6i_peer) rt6_bind_peer(rt, 1); @@ -252,6 +255,9 @@ static void ip6_dst_destroy(struct dst_entry *dst) struct inet6_dev *idev = rt->rt6i_idev; struct inet_peer *peer = rt->rt6i_peer; + if (!(rt->dst.flags & DST_HOST)) + dst_destroy_metrics_generic(dst); + if (idev != NULL) { rt->rt6i_idev = NULL; in6_dev_put(idev); @@ -723,9 +729,7 @@ static struct rt6_info *rt6_alloc_cow(const struct rt6_info *ort, ipv6_addr_copy(&rt->rt6i_gateway, daddr); } - rt->rt6i_dst.plen = 128; rt->rt6i_flags |= RTF_CACHE; - rt->dst.flags |= DST_HOST; #ifdef CONFIG_IPV6_SUBTREES if (rt->rt6i_src.plen && saddr) { @@ -775,9 +779,7 @@ static struct rt6_info *rt6_alloc_clone(struct rt6_info *ort, struct rt6_info *rt = ip6_rt_copy(ort, daddr); if (rt) { - rt->rt6i_dst.plen = 128; rt->rt6i_flags |= RTF_CACHE; - rt->dst.flags |= DST_HOST; dst_set_neighbour(&rt->dst, neigh_clone(dst_get_neighbour_raw(&ort->dst))); } return rt; @@ -1078,12 +1080,15 @@ struct dst_entry *icmp6_dst_alloc(struct net_device *dev, neigh = NULL; } - rt->rt6i_idev = idev; + rt->dst.flags |= DST_HOST; + rt->dst.output = ip6_output; dst_set_neighbour(&rt->dst, neigh); atomic_set(&rt->dst.__refcnt, 1); - ipv6_addr_copy(&rt->rt6i_dst.addr, addr); dst_metric_set(&rt->dst, RTAX_HOPLIMIT, 255); - rt->dst.output = ip6_output; + + ipv6_addr_copy(&rt->rt6i_dst.addr, addr); + rt->rt6i_dst.plen = 128; + rt->rt6i_idev = idev; spin_lock_bh(&icmp6_dst_lock); rt->dst.next = icmp6_dst_gc_list; @@ -1261,6 +1266,14 @@ int ip6_route_add(struct fib6_config *cfg) if (rt->rt6i_dst.plen == 128) rt->dst.flags |= DST_HOST; + if (!(rt->dst.flags & DST_HOST) && cfg->fc_mx) { + u32 *metrics = kzalloc(sizeof(u32) * RTAX_MAX, GFP_KERNEL); + if (!metrics) { + err = -ENOMEM; + goto out; + } + dst_init_metrics(&rt->dst, metrics, 0); + } #ifdef CONFIG_IPV6_SUBTREES ipv6_addr_prefix(&rt->rt6i_src.addr, &cfg->fc_src, cfg->fc_src_len); rt->rt6i_src.plen = cfg->fc_src_len; @@ -1607,9 +1620,6 @@ void rt6_redirect(const struct in6_addr *dest, const struct in6_addr *src, if (on_link) nrt->rt6i_flags &= ~RTF_GATEWAY; - nrt->rt6i_dst.plen = 128; - nrt->dst.flags |= DST_HOST; - ipv6_addr_copy(&nrt->rt6i_gateway, (struct in6_addr*)neigh->primary_key); dst_set_neighbour(&nrt->dst, neigh_clone(neigh)); @@ -1754,9 +1764,10 @@ static struct rt6_info *ip6_rt_copy(const struct rt6_info *ort, if (rt) { rt->dst.input = ort->dst.input; rt->dst.output = ort->dst.output; + rt->dst.flags |= DST_HOST; ipv6_addr_copy(&rt->rt6i_dst.addr, dest); - rt->rt6i_dst.plen = ort->rt6i_dst.plen; + rt->rt6i_dst.plen = 128; dst_copy_metrics(&rt->dst, &ort->dst); rt->dst.error = ort->dst.error; rt->rt6i_idev = ort->rt6i_idev; diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c index 07bf1085458..00b15ac7a70 100644 --- a/net/ipv6/sit.c +++ b/net/ipv6/sit.c @@ -672,6 +672,9 @@ static netdev_tx_t ipip6_tunnel_xmit(struct sk_buff *skb, if (skb->protocol != htons(ETH_P_IPV6)) goto tx_error; + if (tos == 1) + tos = ipv6_get_dsfield(iph6); + /* ISATAP (RFC4214) - must come before 6to4 */ if (dev->priv_flags & IFF_ISATAP) { struct neighbour *neigh = NULL; diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index d1fb63f4aeb..3c9fa618b69 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -531,20 +531,6 @@ static int tcp_v6_rtx_synack(struct sock *sk, struct request_sock *req, return tcp_v6_send_synack(sk, req, rvp); } -static inline void syn_flood_warning(struct sk_buff *skb) -{ -#ifdef CONFIG_SYN_COOKIES - if (sysctl_tcp_syncookies) - printk(KERN_INFO - "TCPv6: Possible SYN flooding on port %d. " - "Sending cookies.\n", ntohs(tcp_hdr(skb)->dest)); - else -#endif - printk(KERN_INFO - "TCPv6: Possible SYN flooding on port %d. " - "Dropping request.\n", ntohs(tcp_hdr(skb)->dest)); -} - static void tcp_v6_reqsk_destructor(struct request_sock *req) { kfree_skb(inet6_rsk(req)->pktopts); @@ -1179,11 +1165,7 @@ static int tcp_v6_conn_request(struct sock *sk, struct sk_buff *skb) struct tcp_sock *tp = tcp_sk(sk); __u32 isn = TCP_SKB_CB(skb)->when; struct dst_entry *dst = NULL; -#ifdef CONFIG_SYN_COOKIES int want_cookie = 0; -#else -#define want_cookie 0 -#endif if (skb->protocol == htons(ETH_P_IP)) return tcp_v4_conn_request(sk, skb); @@ -1192,14 +1174,9 @@ static int tcp_v6_conn_request(struct sock *sk, struct sk_buff *skb) goto drop; if (inet_csk_reqsk_queue_is_full(sk) && !isn) { - if (net_ratelimit()) - syn_flood_warning(skb); -#ifdef CONFIG_SYN_COOKIES - if (sysctl_tcp_syncookies) - want_cookie = 1; - else -#endif - goto drop; + want_cookie = tcp_syn_flood_action(sk, skb, "TCPv6"); + if (!want_cookie) + goto drop; } if (sk_acceptq_is_full(sk) && inet_csk_reqsk_queue_young(sk) > 1) @@ -1249,9 +1226,7 @@ static int tcp_v6_conn_request(struct sock *sk, struct sk_buff *skb) while (l-- > 0) *c++ ^= *hash_location++; -#ifdef CONFIG_SYN_COOKIES want_cookie = 0; /* not our kind of cookie */ -#endif tmp_ext.cookie_out_never = 0; /* false */ tmp_ext.cookie_plus = tmp_opt.cookie_plus; } else if (!tp->rx_opt.cookie_in_always) { diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 29213b51c49..bb95e8e1c6f 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -1090,8 +1090,8 @@ do_udp_sendmsg: memset(opt, 0, sizeof(struct ipv6_txoptions)); opt->tot_len = sizeof(*opt); - err = datagram_send_ctl(sock_net(sk), msg, &fl6, opt, &hlimit, - &tclass, &dontfrag); + err = datagram_send_ctl(sock_net(sk), sk, msg, &fl6, opt, + &hlimit, &tclass, &dontfrag); if (err < 0) { fl6_sock_release(flowlabel); return err; diff --git a/net/irda/irsysctl.c b/net/irda/irsysctl.c index d0b70dadf73..2615ffc8e78 100644 --- a/net/irda/irsysctl.c +++ b/net/irda/irsysctl.c @@ -40,9 +40,9 @@ extern int sysctl_slot_timeout; extern int sysctl_fast_poll_increase; extern char sysctl_devname[]; extern int sysctl_max_baud_rate; -extern int sysctl_min_tx_turn_time; -extern int sysctl_max_tx_data_size; -extern int sysctl_max_tx_window; +extern unsigned int sysctl_min_tx_turn_time; +extern unsigned int sysctl_max_tx_data_size; +extern unsigned int sysctl_max_tx_window; extern int sysctl_max_noreply_time; extern int sysctl_warn_noreply_time; extern int sysctl_lap_keepalive_time; diff --git a/net/irda/qos.c b/net/irda/qos.c index 1b51bcf4239..4369f7f41bc 100644 --- a/net/irda/qos.c +++ b/net/irda/qos.c @@ -60,7 +60,7 @@ int sysctl_max_noreply_time = 12; * Default is 10us which means using the unmodified value given by the * peer except if it's 0 (0 is likely a bug in the other stack). */ -unsigned sysctl_min_tx_turn_time = 10; +unsigned int sysctl_min_tx_turn_time = 10; /* * Maximum data size to be used in transmission in payload of LAP frame. * There is a bit of confusion in the IrDA spec : @@ -75,13 +75,13 @@ unsigned sysctl_min_tx_turn_time = 10; * bytes frames or all negotiated frame sizes, but you can use the sysctl * to play with this value anyway. * Jean II */ -unsigned sysctl_max_tx_data_size = 2042; +unsigned int sysctl_max_tx_data_size = 2042; /* * Maximum transmit window, i.e. number of LAP frames between turn-around. * This allow to override what the peer told us. Some peers are buggy and * don't always support what they tell us. * Jean II */ -unsigned sysctl_max_tx_window = 7; +unsigned int sysctl_max_tx_window = 7; static int irlap_param_baud_rate(void *instance, irda_param_t *param, int get); static int irlap_param_link_disconnect(void *instance, irda_param_t *parm, diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 866f269183c..acb44230b25 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -1012,7 +1012,6 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw) cancel_work_sync(&local->reconfig_filter); ieee80211_clear_tx_pending(local); - sta_info_stop(local); rate_control_deinitialize(local); if (skb_queue_len(&local->skb_queue) || @@ -1024,6 +1023,7 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw) destroy_workqueue(local->workqueue); wiphy_unregister(local->hw.wiphy); + sta_info_stop(local); ieee80211_wep_free(local); ieee80211_led_exit(local); kfree(local->int_scan_req); diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 3db78b696c5..21070e9bc8d 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -665,7 +665,7 @@ static int __must_check __sta_info_destroy(struct sta_info *sta) BUG_ON(!sdata->bss); atomic_dec(&sdata->bss->num_sta_ps); - __sta_info_clear_tim_bit(sdata->bss, sta); + sta_info_clear_tim_bit(sta); } local->num_sta--; diff --git a/net/netfilter/nf_conntrack_pptp.c b/net/netfilter/nf_conntrack_pptp.c index 2fd4565144d..31d56b23b9e 100644 --- a/net/netfilter/nf_conntrack_pptp.c +++ b/net/netfilter/nf_conntrack_pptp.c @@ -364,6 +364,7 @@ pptp_inbound_pkt(struct sk_buff *skb, break; case PPTP_WAN_ERROR_NOTIFY: + case PPTP_SET_LINK_INFO: case PPTP_ECHO_REQUEST: case PPTP_ECHO_REPLY: /* I don't have to explain these ;) */ diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c index 37bf94394be..8235b86b4e8 100644 --- a/net/netfilter/nf_conntrack_proto_tcp.c +++ b/net/netfilter/nf_conntrack_proto_tcp.c @@ -409,7 +409,7 @@ static void tcp_options(const struct sk_buff *skb, if (opsize < 2) /* "silly options" */ return; if (opsize > length) - break; /* don't parse partial options */ + return; /* don't parse partial options */ if (opcode == TCPOPT_SACK_PERM && opsize == TCPOLEN_SACK_PERM) @@ -447,7 +447,7 @@ static void tcp_sack(const struct sk_buff *skb, unsigned int dataoff, BUG_ON(ptr == NULL); /* Fast path for timestamp-only option */ - if (length == TCPOLEN_TSTAMP_ALIGNED*4 + if (length == TCPOLEN_TSTAMP_ALIGNED && *(__be32 *)ptr == htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | (TCPOPT_TIMESTAMP << 8) @@ -469,7 +469,7 @@ static void tcp_sack(const struct sk_buff *skb, unsigned int dataoff, if (opsize < 2) /* "silly options" */ return; if (opsize > length) - break; /* don't parse partial options */ + return; /* don't parse partial options */ if (opcode == TCPOPT_SACK && opsize >= (TCPOLEN_SACK_BASE diff --git a/net/netfilter/nfnetlink_queue.c b/net/netfilter/nfnetlink_queue.c index 00bd475eab4..a80b0cb03f1 100644 --- a/net/netfilter/nfnetlink_queue.c +++ b/net/netfilter/nfnetlink_queue.c @@ -646,8 +646,8 @@ verdicthdr_get(const struct nlattr * const nfqa[]) return NULL; vhdr = nla_data(nfqa[NFQA_VERDICT_HDR]); - verdict = ntohl(vhdr->verdict); - if ((verdict & NF_VERDICT_MASK) > NF_MAX_VERDICT) + verdict = ntohl(vhdr->verdict) & NF_VERDICT_MASK; + if (verdict > NF_MAX_VERDICT || verdict == NF_STOLEN) return NULL; return vhdr; } diff --git a/net/netfilter/xt_rateest.c b/net/netfilter/xt_rateest.c index 76a083184d8..ed0db15ab00 100644 --- a/net/netfilter/xt_rateest.c +++ b/net/netfilter/xt_rateest.c @@ -78,7 +78,7 @@ static int xt_rateest_mt_checkentry(const struct xt_mtchk_param *par) { struct xt_rateest_match_info *info = par->matchinfo; struct xt_rateest *est1, *est2; - int ret = false; + int ret = -EINVAL; if (hweight32(info->flags & (XT_RATEEST_MATCH_ABS | XT_RATEEST_MATCH_REL)) != 1) @@ -101,13 +101,12 @@ static int xt_rateest_mt_checkentry(const struct xt_mtchk_param *par) if (!est1) goto err1; + est2 = NULL; if (info->flags & XT_RATEEST_MATCH_REL) { est2 = xt_rateest_lookup(info->name2); if (!est2) goto err2; - } else - est2 = NULL; - + } info->est1 = est1; info->est2 = est2; @@ -116,7 +115,7 @@ static int xt_rateest_mt_checkentry(const struct xt_mtchk_param *par) err2: xt_rateest_put(est1); err1: - return -EINVAL; + return ret; } static void xt_rateest_mt_destroy(const struct xt_mtdtor_param *par) diff --git a/net/sched/act_mirred.c b/net/sched/act_mirred.c index 102fc212cd6..e051398fdf6 100644 --- a/net/sched/act_mirred.c +++ b/net/sched/act_mirred.c @@ -196,8 +196,7 @@ static int tcf_mirred(struct sk_buff *skb, const struct tc_action *a, skb2->skb_iif = skb->dev->ifindex; skb2->dev = dev; - dev_queue_xmit(skb2); - err = 0; + err = dev_queue_xmit(skb2); out: if (err) { diff --git a/net/sched/cls_rsvp.h b/net/sched/cls_rsvp.h index be4505ee67a..b01427924f8 100644 --- a/net/sched/cls_rsvp.h +++ b/net/sched/cls_rsvp.h @@ -425,7 +425,7 @@ static int rsvp_change(struct tcf_proto *tp, unsigned long base, struct rsvp_filter *f, **fp; struct rsvp_session *s, **sp; struct tc_rsvp_pinfo *pinfo = NULL; - struct nlattr *opt = tca[TCA_OPTIONS-1]; + struct nlattr *opt = tca[TCA_OPTIONS]; struct nlattr *tb[TCA_RSVP_MAX + 1]; struct tcf_exts e; unsigned int h1, h2; @@ -439,7 +439,7 @@ static int rsvp_change(struct tcf_proto *tp, unsigned long base, if (err < 0) return err; - err = tcf_exts_validate(tp, tb, tca[TCA_RATE-1], &e, &rsvp_ext_map); + err = tcf_exts_validate(tp, tb, tca[TCA_RATE], &e, &rsvp_ext_map); if (err < 0) return err; @@ -449,8 +449,8 @@ static int rsvp_change(struct tcf_proto *tp, unsigned long base, if (f->handle != handle && handle) goto errout2; - if (tb[TCA_RSVP_CLASSID-1]) { - f->res.classid = nla_get_u32(tb[TCA_RSVP_CLASSID-1]); + if (tb[TCA_RSVP_CLASSID]) { + f->res.classid = nla_get_u32(tb[TCA_RSVP_CLASSID]); tcf_bind_filter(tp, &f->res, base); } @@ -462,7 +462,7 @@ static int rsvp_change(struct tcf_proto *tp, unsigned long base, err = -EINVAL; if (handle) goto errout2; - if (tb[TCA_RSVP_DST-1] == NULL) + if (tb[TCA_RSVP_DST] == NULL) goto errout2; err = -ENOBUFS; @@ -471,19 +471,19 @@ static int rsvp_change(struct tcf_proto *tp, unsigned long base, goto errout2; h2 = 16; - if (tb[TCA_RSVP_SRC-1]) { - memcpy(f->src, nla_data(tb[TCA_RSVP_SRC-1]), sizeof(f->src)); + if (tb[TCA_RSVP_SRC]) { + memcpy(f->src, nla_data(tb[TCA_RSVP_SRC]), sizeof(f->src)); h2 = hash_src(f->src); } - if (tb[TCA_RSVP_PINFO-1]) { - pinfo = nla_data(tb[TCA_RSVP_PINFO-1]); + if (tb[TCA_RSVP_PINFO]) { + pinfo = nla_data(tb[TCA_RSVP_PINFO]); f->spi = pinfo->spi; f->tunnelhdr = pinfo->tunnelhdr; } - if (tb[TCA_RSVP_CLASSID-1]) - f->res.classid = nla_get_u32(tb[TCA_RSVP_CLASSID-1]); + if (tb[TCA_RSVP_CLASSID]) + f->res.classid = nla_get_u32(tb[TCA_RSVP_CLASSID]); - dst = nla_data(tb[TCA_RSVP_DST-1]); + dst = nla_data(tb[TCA_RSVP_DST]); h1 = hash_dst(dst, pinfo ? pinfo->protocol : 0, pinfo ? pinfo->tunnelid : 0); err = -ENOMEM; @@ -642,8 +642,7 @@ nla_put_failure: return -1; } -static struct tcf_proto_ops RSVP_OPS = { - .next = NULL, +static struct tcf_proto_ops RSVP_OPS __read_mostly = { .kind = RSVP_ID, .classify = rsvp_classify, .init = rsvp_init, diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c index 167c880cf8d..76388b083f2 100644 --- a/net/sctp/sm_sideeffect.c +++ b/net/sctp/sm_sideeffect.c @@ -1689,6 +1689,11 @@ static int sctp_cmd_interpreter(sctp_event_t event_type, case SCTP_CMD_PURGE_ASCONF_QUEUE: sctp_asconf_queue_teardown(asoc); break; + + case SCTP_CMD_SET_ASOC: + asoc = cmd->obj.asoc; + break; + default: pr_warn("Impossible command: %u, %p\n", cmd->verb, cmd->obj.ptr); diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c index 49b847b00f9..a0f31e6c1c6 100644 --- a/net/sctp/sm_statefuns.c +++ b/net/sctp/sm_statefuns.c @@ -2047,6 +2047,12 @@ sctp_disposition_t sctp_sf_do_5_2_4_dupcook(const struct sctp_endpoint *ep, sctp_add_cmd_sf(commands, SCTP_CMD_NEW_ASOC, SCTP_ASOC(new_asoc)); sctp_add_cmd_sf(commands, SCTP_CMD_DELETE_TCB, SCTP_NULL()); + /* Restore association pointer to provide SCTP command interpeter + * with a valid context in case it needs to manipulate + * the queues */ + sctp_add_cmd_sf(commands, SCTP_CMD_SET_ASOC, + SCTP_ASOC((struct sctp_association *)asoc)); + return retval; nomem: diff --git a/net/socket.c b/net/socket.c index 24a77400b65..ffe92ca32f2 100644 --- a/net/socket.c +++ b/net/socket.c @@ -1965,8 +1965,9 @@ static int __sys_sendmsg(struct socket *sock, struct msghdr __user *msg, * used_address->name_len is initialized to UINT_MAX so that the first * destination address never matches. */ - if (used_address && used_address->name_len == msg_sys->msg_namelen && - !memcmp(&used_address->name, msg->msg_name, + if (used_address && msg_sys->msg_name && + used_address->name_len == msg_sys->msg_namelen && + !memcmp(&used_address->name, msg_sys->msg_name, used_address->name_len)) { err = sock_sendmsg_nosec(sock, msg_sys, total_len); goto out_freectl; @@ -1978,8 +1979,9 @@ static int __sys_sendmsg(struct socket *sock, struct msghdr __user *msg, */ if (used_address && err >= 0) { used_address->name_len = msg_sys->msg_namelen; - memcpy(&used_address->name, msg->msg_name, - used_address->name_len); + if (msg_sys->msg_name) + memcpy(&used_address->name, msg_sys->msg_name, + used_address->name_len); } out_freectl: diff --git a/net/wireless/core.c b/net/wireless/core.c index 645437cfc46..c14865172da 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -616,6 +616,9 @@ int wiphy_register(struct wiphy *wiphy) if (res) goto out_rm_dev; + rtnl_lock(); + rdev->wiphy.registered = true; + rtnl_unlock(); return 0; out_rm_dev: @@ -647,6 +650,10 @@ void wiphy_unregister(struct wiphy *wiphy) { struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy); + rtnl_lock(); + rdev->wiphy.registered = false; + rtnl_unlock(); + rfkill_unregister(rdev->rfkill); /* protect the device list */ diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 02751dbc5a9..68a471ba193 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -852,6 +852,7 @@ static void handle_channel(struct wiphy *wiphy, return; } + chan->beacon_found = false; chan->flags = flags | bw_flags | map_regdom_flags(reg_rule->flags); chan->max_antenna_gain = min(chan->orig_mag, (int) MBI_TO_DBI(power_rule->max_antenna_gain)); diff --git a/net/wireless/sme.c b/net/wireless/sme.c index b7b6ff8be55..dec0fa28372 100644 --- a/net/wireless/sme.c +++ b/net/wireless/sme.c @@ -118,6 +118,8 @@ static int cfg80211_conn_scan(struct wireless_dev *wdev) i++, j++) request->channels[i] = &wdev->wiphy->bands[band]->channels[j]; + request->rates[band] = + (1 << wdev->wiphy->bands[band]->n_bitrates) - 1; } } request->n_channels = n_channels; diff --git a/net/wireless/sysfs.c b/net/wireless/sysfs.c index c6e4ca6a7d2..ff574597a85 100644 --- a/net/wireless/sysfs.c +++ b/net/wireless/sysfs.c @@ -93,7 +93,8 @@ static int wiphy_suspend(struct device *dev, pm_message_t state) if (rdev->ops->suspend) { rtnl_lock(); - ret = rdev->ops->suspend(&rdev->wiphy, rdev->wowlan); + if (rdev->wiphy.registered) + ret = rdev->ops->suspend(&rdev->wiphy, rdev->wowlan); rtnl_unlock(); } @@ -112,7 +113,8 @@ static int wiphy_resume(struct device *dev) if (rdev->ops->resume) { rtnl_lock(); - ret = rdev->ops->resume(&rdev->wiphy); + if (rdev->wiphy.registered) + ret = rdev->ops->resume(&rdev->wiphy); rtnl_unlock(); } diff --git a/net/xfrm/xfrm_input.c b/net/xfrm/xfrm_input.c index a026b0ef244..54a0dc2e2f8 100644 --- a/net/xfrm/xfrm_input.c +++ b/net/xfrm/xfrm_input.c @@ -212,6 +212,11 @@ resume: /* only the first xfrm gets the encap type */ encap_type = 0; + if (async && x->repl->check(x, skb, seq)) { + XFRM_INC_STATS(net, LINUX_MIB_XFRMINSTATESEQERROR); + goto drop_unlock; + } + x->repl->advance(x, seq); x->curlft.bytes += skb->len; diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index 9d761c95eca..3dfc47134e5 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -2574,7 +2574,8 @@ sub process { } else { $cast = $cast2; } - WARN("$call() should probably be ${call}_t($cast, $arg1, $arg2)\n" . $herecurr); + WARN("MINMAX", + "$call() should probably be ${call}_t($cast, $arg1, $arg2)\n" . $herecurr); } } diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl index eb2f1e64edf..4594f334105 100755 --- a/scripts/get_maintainer.pl +++ b/scripts/get_maintainer.pl @@ -1389,7 +1389,7 @@ sub vcs_exists { warn("$P: No supported VCS found. Add --nogit to options?\n"); warn("Using a git repository produces better results.\n"); warn("Try Linus Torvalds' latest git repository using:\n"); - warn("git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git\n"); + warn("git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git\n"); $printed_novcs = 1; } return 0; diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c index 86d0caf91b3..62e90b862a0 100644 --- a/sound/core/pcm_lib.c +++ b/sound/core/pcm_lib.c @@ -1761,6 +1761,10 @@ static int wait_for_avail(struct snd_pcm_substream *substream, snd_pcm_uframes_t avail = 0; long wait_time, tout; + init_waitqueue_entry(&wait, current); + set_current_state(TASK_INTERRUPTIBLE); + add_wait_queue(&runtime->tsleep, &wait); + if (runtime->no_period_wakeup) wait_time = MAX_SCHEDULE_TIMEOUT; else { @@ -1771,16 +1775,32 @@ static int wait_for_avail(struct snd_pcm_substream *substream, } wait_time = msecs_to_jiffies(wait_time * 1000); } - init_waitqueue_entry(&wait, current); - add_wait_queue(&runtime->tsleep, &wait); + for (;;) { if (signal_pending(current)) { err = -ERESTARTSYS; break; } + + /* + * We need to check if space became available already + * (and thus the wakeup happened already) first to close + * the race of space already having become available. + * This check must happen after been added to the waitqueue + * and having current state be INTERRUPTIBLE. + */ + if (is_playback) + avail = snd_pcm_playback_avail(runtime); + else + avail = snd_pcm_capture_avail(runtime); + if (avail >= runtime->twake) + break; snd_pcm_stream_unlock_irq(substream); - tout = schedule_timeout_interruptible(wait_time); + + tout = schedule_timeout(wait_time); + snd_pcm_stream_lock_irq(substream); + set_current_state(TASK_INTERRUPTIBLE); switch (runtime->status->state) { case SNDRV_PCM_STATE_SUSPENDED: err = -ESTRPIPE; @@ -1806,14 +1826,9 @@ static int wait_for_avail(struct snd_pcm_substream *substream, err = -EIO; break; } - if (is_playback) - avail = snd_pcm_playback_avail(runtime); - else - avail = snd_pcm_capture_avail(runtime); - if (avail >= runtime->twake) - break; } _endloop: + set_current_state(TASK_RUNNING); remove_wait_queue(&runtime->tsleep, &wait); *availp = avail; return err; diff --git a/sound/pci/fm801.c b/sound/pci/fm801.c index f9123f09e83..32b02d90670 100644 --- a/sound/pci/fm801.c +++ b/sound/pci/fm801.c @@ -68,6 +68,7 @@ MODULE_PARM_DESC(enable, "Enable FM801 soundcard."); module_param_array(tea575x_tuner, int, NULL, 0444); MODULE_PARM_DESC(tea575x_tuner, "TEA575x tuner access method (0 = auto, 1 = SF256-PCS, 2=SF256-PCP, 3=SF64-PCR, 8=disable, +16=tuner-only)."); +#define TUNER_DISABLED (1<<3) #define TUNER_ONLY (1<<4) #define TUNER_TYPE_MASK (~TUNER_ONLY & 0xFFFF) @@ -1150,7 +1151,8 @@ static int snd_fm801_free(struct fm801 *chip) __end_hw: #ifdef CONFIG_SND_FM801_TEA575X_BOOL - snd_tea575x_exit(&chip->tea); + if (!(chip->tea575x_tuner & TUNER_DISABLED)) + snd_tea575x_exit(&chip->tea); #endif if (chip->irq >= 0) free_irq(chip->irq, chip); @@ -1236,7 +1238,6 @@ static int __devinit snd_fm801_create(struct snd_card *card, (tea575x_tuner & TUNER_TYPE_MASK) < 4) { if (snd_tea575x_init(&chip->tea)) { snd_printk(KERN_ERR "TEA575x radio not found\n"); - snd_fm801_free(chip); return -ENODEV; } } else if ((tea575x_tuner & TUNER_TYPE_MASK) == 0) { @@ -1251,11 +1252,15 @@ static int __devinit snd_fm801_create(struct snd_card *card, } if (tea575x_tuner == 4) { snd_printk(KERN_ERR "TEA575x radio not found\n"); - snd_fm801_free(chip); - return -ENODEV; + chip->tea575x_tuner = TUNER_DISABLED; } } - strlcpy(chip->tea.card, snd_fm801_tea575x_gpios[(tea575x_tuner & TUNER_TYPE_MASK) - 1].name, sizeof(chip->tea.card)); + if (!(chip->tea575x_tuner & TUNER_DISABLED)) { + strlcpy(chip->tea.card, + snd_fm801_tea575x_gpios[(tea575x_tuner & + TUNER_TYPE_MASK) - 1].name, + sizeof(chip->tea.card)); + } #endif *rchip = chip; diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 3e7850c238c..f3aefef3721 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -579,9 +579,13 @@ int snd_hda_get_conn_index(struct hda_codec *codec, hda_nid_t mux, return -1; } recursive++; - for (i = 0; i < nums; i++) + for (i = 0; i < nums; i++) { + unsigned int type = get_wcaps_type(get_wcaps(codec, conn[i])); + if (type == AC_WID_PIN || type == AC_WID_AUD_OUT) + continue; if (snd_hda_get_conn_index(codec, conn[i], nid, recursive) >= 0) return i; + } return -1; } EXPORT_SYMBOL_HDA(snd_hda_get_conn_index); diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c index d6c93d92b55..c45f3e69bcf 100644 --- a/sound/pci/hda/patch_cirrus.c +++ b/sound/pci/hda/patch_cirrus.c @@ -535,7 +535,7 @@ static int add_volume(struct hda_codec *codec, const char *name, int index, unsigned int pval, int dir, struct snd_kcontrol **kctlp) { - char tmp[32]; + char tmp[44]; struct snd_kcontrol_new knew = HDA_CODEC_VOLUME_IDX(tmp, index, 0, 0, HDA_OUTPUT); knew.private_value = pval; diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 502fc949945..7696d05b935 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -3348,6 +3348,8 @@ static hda_nid_t get_unassigned_dac(struct hda_codec *codec, hda_nid_t pin, #define MAX_AUTO_DACS 5 +#define DAC_SLAVE_FLAG 0x8000 /* filled dac is a slave */ + /* fill analog DAC list from the widget tree */ static int fill_cx_auto_dacs(struct hda_codec *codec, hda_nid_t *dacs) { @@ -3370,16 +3372,26 @@ static int fill_cx_auto_dacs(struct hda_codec *codec, hda_nid_t *dacs) /* fill pin_dac_pair list from the pin and dac list */ static int fill_dacs_for_pins(struct hda_codec *codec, hda_nid_t *pins, int num_pins, hda_nid_t *dacs, int *rest, - struct pin_dac_pair *filled, int type) + struct pin_dac_pair *filled, int nums, + int type) { - int i, nums; + int i, start = nums; - nums = 0; - for (i = 0; i < num_pins; i++) { + for (i = 0; i < num_pins; i++, nums++) { filled[nums].pin = pins[i]; filled[nums].type = type; filled[nums].dac = get_unassigned_dac(codec, pins[i], dacs, rest); - nums++; + if (filled[nums].dac) + continue; + if (filled[start].dac && get_connection_index(codec, pins[i], filled[start].dac) >= 0) { + filled[nums].dac = filled[start].dac | DAC_SLAVE_FLAG; + continue; + } + if (filled[0].dac && get_connection_index(codec, pins[i], filled[0].dac) >= 0) { + filled[nums].dac = filled[0].dac | DAC_SLAVE_FLAG; + continue; + } + snd_printdd("Failed to find a DAC for pin 0x%x", pins[i]); } return nums; } @@ -3395,19 +3407,19 @@ static void cx_auto_parse_output(struct hda_codec *codec) rest = fill_cx_auto_dacs(codec, dacs); /* parse all analog output pins */ nums = fill_dacs_for_pins(codec, cfg->line_out_pins, cfg->line_outs, - dacs, &rest, spec->dac_info, - AUTO_PIN_LINE_OUT); - nums += fill_dacs_for_pins(codec, cfg->hp_pins, cfg->hp_outs, - dacs, &rest, spec->dac_info + nums, - AUTO_PIN_HP_OUT); - nums += fill_dacs_for_pins(codec, cfg->speaker_pins, cfg->speaker_outs, - dacs, &rest, spec->dac_info + nums, - AUTO_PIN_SPEAKER_OUT); + dacs, &rest, spec->dac_info, 0, + AUTO_PIN_LINE_OUT); + nums = fill_dacs_for_pins(codec, cfg->hp_pins, cfg->hp_outs, + dacs, &rest, spec->dac_info, nums, + AUTO_PIN_HP_OUT); + nums = fill_dacs_for_pins(codec, cfg->speaker_pins, cfg->speaker_outs, + dacs, &rest, spec->dac_info, nums, + AUTO_PIN_SPEAKER_OUT); spec->dac_info_filled = nums; /* fill multiout struct */ for (i = 0; i < nums; i++) { hda_nid_t dac = spec->dac_info[i].dac; - if (!dac) + if (!dac || (dac & DAC_SLAVE_FLAG)) continue; switch (spec->dac_info[i].type) { case AUTO_PIN_LINE_OUT: @@ -3862,7 +3874,7 @@ static void cx_auto_parse_input(struct hda_codec *codec) } if (imux->num_items >= 2 && cfg->num_inputs == imux->num_items) cx_auto_check_auto_mic(codec); - if (imux->num_items > 1 && !spec->auto_mic) { + if (imux->num_items > 1) { for (i = 1; i < imux->num_items; i++) { if (spec->imux_info[i].adc != spec->imux_info[0].adc) { spec->adc_switching = 1; @@ -4035,6 +4047,8 @@ static void cx_auto_init_output(struct hda_codec *codec) nid = spec->dac_info[i].dac; if (!nid) nid = spec->multiout.dac_nids[0]; + else if (nid & DAC_SLAVE_FLAG) + nid &= ~DAC_SLAVE_FLAG; select_connection(codec, spec->dac_info[i].pin, nid); } if (spec->auto_mute) { @@ -4167,9 +4181,11 @@ static int try_add_pb_volume(struct hda_codec *codec, hda_nid_t dac, hda_nid_t pin, const char *name, int idx) { unsigned int caps; - caps = query_amp_caps(codec, dac, HDA_OUTPUT); - if (caps & AC_AMPCAP_NUM_STEPS) - return cx_auto_add_pb_volume(codec, dac, name, idx); + if (dac && !(dac & DAC_SLAVE_FLAG)) { + caps = query_amp_caps(codec, dac, HDA_OUTPUT); + if (caps & AC_AMPCAP_NUM_STEPS) + return cx_auto_add_pb_volume(codec, dac, name, idx); + } caps = query_amp_caps(codec, pin, HDA_OUTPUT); if (caps & AC_AMPCAP_NUM_STEPS) return cx_auto_add_pb_volume(codec, pin, name, idx); @@ -4191,8 +4207,7 @@ static int cx_auto_build_output_controls(struct hda_codec *codec) for (i = 0; i < spec->dac_info_filled; i++) { const char *label; int idx, type; - if (!spec->dac_info[i].dac) - continue; + hda_nid_t dac = spec->dac_info[i].dac; type = spec->dac_info[i].type; if (type == AUTO_PIN_LINE_OUT) type = spec->autocfg.line_out_type; @@ -4211,7 +4226,7 @@ static int cx_auto_build_output_controls(struct hda_codec *codec) idx = num_spk++; break; } - err = try_add_pb_volume(codec, spec->dac_info[i].dac, + err = try_add_pb_volume(codec, dac, spec->dac_info[i].pin, label, idx); if (err < 0) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index fcb11af9ad2..7a73621a890 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -168,7 +168,7 @@ struct alc_spec { unsigned int auto_mic_valid_imux:1; /* valid imux for auto-mic */ unsigned int automute:1; /* HP automute enabled */ unsigned int detect_line:1; /* Line-out detection enabled */ - unsigned int automute_lines:1; /* automute line-out as well */ + unsigned int automute_lines:1; /* automute line-out as well; NOP when automute_hp_lo isn't set */ unsigned int automute_hp_lo:1; /* both HP and LO available */ /* other flags */ @@ -551,7 +551,7 @@ static void update_speakers(struct hda_codec *codec) if (spec->autocfg.line_out_pins[0] == spec->autocfg.hp_pins[0] || spec->autocfg.line_out_pins[0] == spec->autocfg.speaker_pins[0]) return; - if (!spec->automute_lines || !spec->automute) + if (!spec->automute || (spec->automute_hp_lo && !spec->automute_lines)) on = 0; else on = spec->jack_present; @@ -565,11 +565,11 @@ static void alc_hp_automute(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; - if (!spec->automute) - return; spec->jack_present = detect_jacks(codec, ARRAY_SIZE(spec->autocfg.hp_pins), spec->autocfg.hp_pins); + if (!spec->automute) + return; update_speakers(codec); } @@ -578,11 +578,15 @@ static void alc_line_automute(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; - if (!spec->automute || !spec->detect_line) + /* check LO jack only when it's different from HP */ + if (spec->autocfg.line_out_pins[0] == spec->autocfg.hp_pins[0]) return; + spec->line_jack_present = detect_jacks(codec, ARRAY_SIZE(spec->autocfg.line_out_pins), spec->autocfg.line_out_pins); + if (!spec->automute || !spec->detect_line) + return; update_speakers(codec); } @@ -803,7 +807,7 @@ static int alc_automute_mode_get(struct snd_kcontrol *kcontrol, unsigned int val; if (!spec->automute) val = 0; - else if (!spec->automute_lines) + else if (!spec->automute_hp_lo || !spec->automute_lines) val = 1; else val = 2; @@ -824,7 +828,8 @@ static int alc_automute_mode_put(struct snd_kcontrol *kcontrol, spec->automute = 0; break; case 1: - if (spec->automute && !spec->automute_lines) + if (spec->automute && + (!spec->automute_hp_lo || !spec->automute_lines)) return 0; spec->automute = 1; spec->automute_lines = 0; @@ -1320,7 +1325,9 @@ do_sku: * 15 : 1 --> enable the function "Mute internal speaker * when the external headphone out jack is plugged" */ - if (!spec->autocfg.hp_pins[0]) { + if (!spec->autocfg.hp_pins[0] && + !(spec->autocfg.line_out_pins[0] && + spec->autocfg.line_out_type == AUTO_PIN_HP_OUT)) { hda_nid_t nid; tmp = (ass >> 11) & 0x3; /* HP to chassis */ if (tmp == 0) @@ -3083,16 +3090,22 @@ static void alc_auto_init_multi_out(struct hda_codec *codec) static void alc_auto_init_extra_out(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; - hda_nid_t pin; + hda_nid_t pin, dac; pin = spec->autocfg.hp_pins[0]; - if (pin) - alc_auto_set_output_and_unmute(codec, pin, PIN_HP, - spec->multiout.hp_nid); + if (pin) { + dac = spec->multiout.hp_nid; + if (!dac) + dac = spec->multiout.dac_nids[0]; + alc_auto_set_output_and_unmute(codec, pin, PIN_HP, dac); + } pin = spec->autocfg.speaker_pins[0]; - if (pin) - alc_auto_set_output_and_unmute(codec, pin, PIN_OUT, - spec->multiout.extra_out_nid[0]); + if (pin) { + dac = spec->multiout.extra_out_nid[0]; + if (!dac) + dac = spec->multiout.dac_nids[0]; + alc_auto_set_output_and_unmute(codec, pin, PIN_OUT, dac); + } } /* diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 5145b663ef6..987e3cf71a0 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -5630,6 +5630,7 @@ again: switch (codec->vendor_id) { case 0x111d76d1: case 0x111d76d9: + case 0x111d76df: case 0x111d76e5: case 0x111d7666: case 0x111d7667: @@ -6573,6 +6574,7 @@ static const struct hda_codec_preset snd_hda_preset_sigmatel[] = { { .id = 0x111d76cc, .name = "92HD89F3", .patch = patch_stac92hd73xx }, { .id = 0x111d76cd, .name = "92HD89F2", .patch = patch_stac92hd73xx }, { .id = 0x111d76ce, .name = "92HD89F1", .patch = patch_stac92hd73xx }, + { .id = 0x111d76df, .name = "92HD93BXX", .patch = patch_stac92hd83xxx}, { .id = 0x111d76e0, .name = "92HD91BXX", .patch = patch_stac92hd83xxx}, { .id = 0x111d76e3, .name = "92HD98BXX", .patch = patch_stac92hd83xxx}, { .id = 0x111d76e5, .name = "92HD99BXX", .patch = patch_stac92hd83xxx}, diff --git a/sound/soc/blackfin/bf5xx-ad193x.c b/sound/soc/blackfin/bf5xx-ad193x.c index d6651c033cb..5956584ea3a 100644 --- a/sound/soc/blackfin/bf5xx-ad193x.c +++ b/sound/soc/blackfin/bf5xx-ad193x.c @@ -56,7 +56,7 @@ static int bf5xx_ad193x_hw_params(struct snd_pcm_substream *substream, switch (params_rate(params)) { case 48000: - clk = 12288000; + clk = 24576000; break; } @@ -103,7 +103,7 @@ static struct snd_soc_dai_link bf5xx_ad193x_dai[] = { .cpu_dai_name = "bfin-tdm.0", .codec_dai_name ="ad193x-hifi", .platform_name = "bfin-tdm-pcm-audio", - .codec_name = "ad193x.5", + .codec_name = "spi0.5", .ops = &bf5xx_ad193x_ops, }, { @@ -112,7 +112,7 @@ static struct snd_soc_dai_link bf5xx_ad193x_dai[] = { .cpu_dai_name = "bfin-tdm.1", .codec_dai_name ="ad193x-hifi", .platform_name = "bfin-tdm-pcm-audio", - .codec_name = "ad193x.5", + .codec_name = "spi0.5", .ops = &bf5xx_ad193x_ops, }, }; diff --git a/sound/soc/blackfin/bf5xx-ad73311.c b/sound/soc/blackfin/bf5xx-ad73311.c index 732a247f252..b94eb7ef7d1 100644 --- a/sound/soc/blackfin/bf5xx-ad73311.c +++ b/sound/soc/blackfin/bf5xx-ad73311.c @@ -128,7 +128,7 @@ static int snd_ad73311_configure(void) return 0; } -static int bf5xx_probe(struct platform_device *pdev) +static int bf5xx_probe(struct snd_soc_card *card) { int err; if (gpio_request(GPIO_SE, "AD73311_SE")) { diff --git a/sound/soc/codecs/ad193x.c b/sound/soc/codecs/ad193x.c index 2374ca5ffe6..eedb6f5e582 100644 --- a/sound/soc/codecs/ad193x.c +++ b/sound/soc/codecs/ad193x.c @@ -27,11 +27,6 @@ struct ad193x_priv { int sysclk; }; -/* ad193x register cache & default register settings */ -static const u8 ad193x_reg[AD193X_NUM_REGS] = { - 0, 0, 0, 0, 0, 0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0, 0, 0, -}; - /* * AD193X volume/mute/de-emphasis etc. controls */ @@ -307,7 +302,8 @@ static int ad193x_hw_params(struct snd_pcm_substream *substream, snd_soc_write(codec, AD193X_PLL_CLK_CTRL0, reg); reg = snd_soc_read(codec, AD193X_DAC_CTRL2); - reg = (reg & (~AD193X_DAC_WORD_LEN_MASK)) | word_len; + reg = (reg & (~AD193X_DAC_WORD_LEN_MASK)) + | (word_len << AD193X_DAC_WORD_LEN_SHFT); snd_soc_write(codec, AD193X_DAC_CTRL2, reg); reg = snd_soc_read(codec, AD193X_ADC_CTRL1); @@ -389,9 +385,6 @@ static int ad193x_probe(struct snd_soc_codec *codec) static struct snd_soc_codec_driver soc_codec_dev_ad193x = { .probe = ad193x_probe, - .reg_cache_default = ad193x_reg, - .reg_cache_size = AD193X_NUM_REGS, - .reg_word_size = sizeof(u16), }; #if defined(CONFIG_SPI_MASTER) diff --git a/sound/soc/codecs/ad193x.h b/sound/soc/codecs/ad193x.h index 9747b549787..cccc2e8e5fb 100644 --- a/sound/soc/codecs/ad193x.h +++ b/sound/soc/codecs/ad193x.h @@ -34,7 +34,8 @@ #define AD193X_DAC_LEFT_HIGH (1 << 3) #define AD193X_DAC_BCLK_INV (1 << 7) #define AD193X_DAC_CTRL2 0x804 -#define AD193X_DAC_WORD_LEN_MASK 0xC +#define AD193X_DAC_WORD_LEN_SHFT 3 +#define AD193X_DAC_WORD_LEN_MASK 0x18 #define AD193X_DAC_MASTER_MUTE 1 #define AD193X_DAC_CHNL_MUTE 0x805 #define AD193X_DACL1_MUTE 0 @@ -63,7 +64,7 @@ #define AD193X_ADC_CTRL1 0x80f #define AD193X_ADC_SERFMT_MASK 0x60 #define AD193X_ADC_SERFMT_STEREO (0 << 5) -#define AD193X_ADC_SERFMT_TDM (1 << 2) +#define AD193X_ADC_SERFMT_TDM (1 << 5) #define AD193X_ADC_SERFMT_AUX (2 << 5) #define AD193X_ADC_WORD_LEN_MASK 0x3 #define AD193X_ADC_CTRL2 0x810 diff --git a/sound/soc/codecs/ssm2602.c b/sound/soc/codecs/ssm2602.c index 84f4ad56855..9801cd7cfcb 100644 --- a/sound/soc/codecs/ssm2602.c +++ b/sound/soc/codecs/ssm2602.c @@ -431,7 +431,8 @@ static int ssm2602_set_dai_fmt(struct snd_soc_dai *codec_dai, static int ssm2602_set_bias_level(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { - u16 reg = snd_soc_read(codec, SSM2602_PWR) & 0xff7f; + u16 reg = snd_soc_read(codec, SSM2602_PWR); + reg &= ~(PWR_POWER_OFF | PWR_OSC_PDN); switch (level) { case SND_SOC_BIAS_ON: diff --git a/sound/soc/codecs/sta32x.c b/sound/soc/codecs/sta32x.c index 409d89d1f34..fbd7eb9e61c 100644 --- a/sound/soc/codecs/sta32x.c +++ b/sound/soc/codecs/sta32x.c @@ -857,6 +857,7 @@ static __devinit int sta32x_i2c_probe(struct i2c_client *i2c, ret = snd_soc_register_codec(&i2c->dev, &sta32x_codec, &sta32x_dai, 1); if (ret != 0) { dev_err(&i2c->dev, "Failed to register codec (%d)\n", ret); + kfree(sta32x); return ret; } diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index 60d740ebeb5..d2c315fa1b9 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -2221,6 +2221,8 @@ static int sysclk_event(struct snd_soc_dapm_widget *w, switch (event) { case SND_SOC_DAPM_PRE_PMU: if (fll) { + try_wait_for_completion(&wm8962->fll_lock); + snd_soc_update_bits(codec, WM8962_FLL_CONTROL_1, WM8962_FLL_ENA, WM8962_FLL_ENA); if (wm8962->irq) { @@ -2927,10 +2929,6 @@ static int wm8962_set_bias_level(struct snd_soc_codec *codec, WM8962_BIAS_ENA | 0x180); msleep(5); - - snd_soc_update_bits(codec, WM8962_CLOCKING2, - WM8962_CLKREG_OVD, - WM8962_CLKREG_OVD); } /* VMID 2*250k */ @@ -3288,6 +3286,8 @@ static int wm8962_set_fll(struct snd_soc_codec *codec, int fll_id, int source, snd_soc_write(codec, WM8962_FLL_CONTROL_7, fll_div.lambda); snd_soc_write(codec, WM8962_FLL_CONTROL_8, fll_div.n); + try_wait_for_completion(&wm8962->fll_lock); + snd_soc_update_bits(codec, WM8962_FLL_CONTROL_1, WM8962_FLL_FRAC | WM8962_FLL_REFCLK_SRC_MASK | WM8962_FLL_ENA, fll1); @@ -3479,31 +3479,6 @@ int wm8962_mic_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack) } EXPORT_SYMBOL_GPL(wm8962_mic_detect); -#ifdef CONFIG_PM -static int wm8962_resume(struct snd_soc_codec *codec) -{ - u16 *reg_cache = codec->reg_cache; - int i; - - /* Restore the registers */ - for (i = 1; i < codec->driver->reg_cache_size; i++) { - switch (i) { - case WM8962_SOFTWARE_RESET: - continue; - default: - break; - } - - if (reg_cache[i] != wm8962_reg[i]) - snd_soc_write(codec, i, reg_cache[i]); - } - - return 0; -} -#else -#define wm8962_resume NULL -#endif - #if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE) static int beep_rates[] = { 500, 1000, 2000, 4000, @@ -3868,6 +3843,10 @@ static int wm8962_probe(struct snd_soc_codec *codec) */ snd_soc_update_bits(codec, WM8962_CLOCKING2, WM8962_SYSCLK_ENA, 0); + /* Ensure we have soft control over all registers */ + snd_soc_update_bits(codec, WM8962_CLOCKING2, + WM8962_CLKREG_OVD, WM8962_CLKREG_OVD); + regulator_bulk_disable(ARRAY_SIZE(wm8962->supplies), wm8962->supplies); if (pdata) { @@ -4011,7 +3990,6 @@ static int wm8962_remove(struct snd_soc_codec *codec) static struct snd_soc_codec_driver soc_codec_dev_wm8962 = { .probe = wm8962_probe, .remove = wm8962_remove, - .resume = wm8962_resume, .set_bias_level = wm8962_set_bias_level, .reg_cache_size = WM8962_MAX_REGISTER + 1, .reg_word_size = sizeof(u16), diff --git a/sound/soc/codecs/wm8996.c b/sound/soc/codecs/wm8996.c index ab8e9d1aaff..0cdb9d10567 100644 --- a/sound/soc/codecs/wm8996.c +++ b/sound/soc/codecs/wm8996.c @@ -420,7 +420,7 @@ static const char *sidetone_hpf_text[] = { }; static const struct soc_enum sidetone_hpf = - SOC_ENUM_SINGLE(WM8996_SIDETONE, 7, 6, sidetone_hpf_text); + SOC_ENUM_SINGLE(WM8996_SIDETONE, 7, 7, sidetone_hpf_text); static const char *hpf_mode_text[] = { "HiFi", "Custom", "Voice" @@ -988,15 +988,10 @@ SND_SOC_DAPM_MICBIAS("MICB1", WM8996_POWER_MANAGEMENT_1, 8, 0), SND_SOC_DAPM_PGA("IN1L PGA", WM8996_POWER_MANAGEMENT_2, 5, 0, NULL, 0), SND_SOC_DAPM_PGA("IN1R PGA", WM8996_POWER_MANAGEMENT_2, 4, 0, NULL, 0), -SND_SOC_DAPM_MUX("IN1L Mux", SND_SOC_NOPM, 0, 0, &in1_mux), -SND_SOC_DAPM_MUX("IN1R Mux", SND_SOC_NOPM, 0, 0, &in1_mux), -SND_SOC_DAPM_MUX("IN2L Mux", SND_SOC_NOPM, 0, 0, &in2_mux), -SND_SOC_DAPM_MUX("IN2R Mux", SND_SOC_NOPM, 0, 0, &in2_mux), - -SND_SOC_DAPM_PGA("IN1L", WM8996_POWER_MANAGEMENT_7, 2, 0, NULL, 0), -SND_SOC_DAPM_PGA("IN1R", WM8996_POWER_MANAGEMENT_7, 3, 0, NULL, 0), -SND_SOC_DAPM_PGA("IN2L", WM8996_POWER_MANAGEMENT_7, 6, 0, NULL, 0), -SND_SOC_DAPM_PGA("IN2R", WM8996_POWER_MANAGEMENT_7, 7, 0, NULL, 0), +SND_SOC_DAPM_MUX("IN1L Mux", WM8996_POWER_MANAGEMENT_7, 2, 0, &in1_mux), +SND_SOC_DAPM_MUX("IN1R Mux", WM8996_POWER_MANAGEMENT_7, 3, 0, &in1_mux), +SND_SOC_DAPM_MUX("IN2L Mux", WM8996_POWER_MANAGEMENT_7, 6, 0, &in2_mux), +SND_SOC_DAPM_MUX("IN2R Mux", WM8996_POWER_MANAGEMENT_7, 7, 0, &in2_mux), SND_SOC_DAPM_SUPPLY("DMIC2", WM8996_POWER_MANAGEMENT_7, 9, 0, NULL, 0), SND_SOC_DAPM_SUPPLY("DMIC1", WM8996_POWER_MANAGEMENT_7, 8, 0, NULL, 0), @@ -1213,6 +1208,16 @@ static const struct snd_soc_dapm_route wm8996_dapm_routes[] = { { "AIF2RX0", NULL, "AIFCLK" }, { "AIF2RX1", NULL, "AIFCLK" }, + { "AIF1TX0", NULL, "AIFCLK" }, + { "AIF1TX1", NULL, "AIFCLK" }, + { "AIF1TX2", NULL, "AIFCLK" }, + { "AIF1TX3", NULL, "AIFCLK" }, + { "AIF1TX4", NULL, "AIFCLK" }, + { "AIF1TX5", NULL, "AIFCLK" }, + + { "AIF2TX0", NULL, "AIFCLK" }, + { "AIF2TX1", NULL, "AIFCLK" }, + { "DSP1RXL", NULL, "SYSDSPCLK" }, { "DSP1RXR", NULL, "SYSDSPCLK" }, { "DSP2RXL", NULL, "SYSDSPCLK" }, @@ -2106,6 +2111,9 @@ static int wm8996_set_fll(struct snd_soc_codec *codec, int fll_id, int source, snd_soc_write(codec, WM8996_FLL_EFS_1, fll_div.lambda); + /* Clear any pending completions (eg, from failed startups) */ + try_wait_for_completion(&wm8996->fll_lock); + snd_soc_update_bits(codec, WM8996_FLL_CONTROL_1, WM8996_FLL_ENA, WM8996_FLL_ENA); diff --git a/sound/soc/ep93xx/ep93xx-i2s.c b/sound/soc/ep93xx/ep93xx-i2s.c index 56efa0c1c9a..099614e1665 100644 --- a/sound/soc/ep93xx/ep93xx-i2s.c +++ b/sound/soc/ep93xx/ep93xx-i2s.c @@ -385,14 +385,14 @@ static int ep93xx_i2s_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { err = -ENODEV; - goto fail; + goto fail_free_info; } info->mem = request_mem_region(res->start, resource_size(res), pdev->name); if (!info->mem) { err = -EBUSY; - goto fail; + goto fail_free_info; } info->regs = ioremap(info->mem->start, resource_size(info->mem)); @@ -435,6 +435,7 @@ fail_unmap_mem: iounmap(info->regs); fail_release_mem: release_mem_region(info->mem->start, resource_size(info->mem)); +fail_free_info: kfree(info); fail: return err; diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c index 732208c8c0b..cb50598338e 100644 --- a/sound/soc/fsl/fsl_dma.c +++ b/sound/soc/fsl/fsl_dma.c @@ -879,10 +879,12 @@ static struct device_node *find_ssi_node(struct device_node *dma_channel_np) * assume that device_node pointers are a valid comparison. */ np = of_parse_phandle(ssi_np, "fsl,playback-dma", 0); + of_node_put(np); if (np == dma_channel_np) return ssi_np; np = of_parse_phandle(ssi_np, "fsl,capture-dma", 0); + of_node_put(np); if (np == dma_channel_np) return ssi_np; } diff --git a/sound/soc/fsl/mpc5200_dma.c b/sound/soc/fsl/mpc5200_dma.c index fd0dc46afc3..5c6c2457386 100644 --- a/sound/soc/fsl/mpc5200_dma.c +++ b/sound/soc/fsl/mpc5200_dma.c @@ -369,7 +369,7 @@ static struct snd_soc_platform_driver mpc5200_audio_dma_platform = { .pcm_free = &psc_dma_free, }; -static int mpc5200_hpcd_probe(struct of_device *op) +static int mpc5200_hpcd_probe(struct platform_device *op) { phys_addr_t fifo; struct psc_dma *psc_dma; @@ -487,7 +487,7 @@ out_unmap: return ret; } -static int mpc5200_hpcd_remove(struct of_device *op) +static int mpc5200_hpcd_remove(struct platform_device *op) { struct psc_dma *psc_dma = dev_get_drvdata(&op->dev); @@ -519,7 +519,7 @@ MODULE_DEVICE_TABLE(of, mpc5200_hpcd_match); static struct platform_driver mpc5200_hpcd_of_driver = { .probe = mpc5200_hpcd_probe, .remove = mpc5200_hpcd_remove, - .dev = { + .driver = { .owner = THIS_MODULE, .name = "mpc5200-pcm-audio", .of_match_table = mpc5200_hpcd_match, diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c index a1929795958..358f0baaf71 100644 --- a/sound/soc/fsl/mpc8610_hpcd.c +++ b/sound/soc/fsl/mpc8610_hpcd.c @@ -345,8 +345,10 @@ static int mpc8610_hpcd_probe(struct platform_device *pdev) } machine_data = kzalloc(sizeof(struct mpc8610_hpcd_data), GFP_KERNEL); - if (!machine_data) - return -ENOMEM; + if (!machine_data) { + ret = -ENOMEM; + goto error_alloc; + } machine_data->dai[0].cpu_dai_name = dev_name(&ssi_pdev->dev); machine_data->dai[0].ops = &mpc8610_hpcd_ops; @@ -494,7 +496,7 @@ static int mpc8610_hpcd_probe(struct platform_device *pdev) ret = platform_device_add(sound_device); if (ret) { dev_err(&pdev->dev, "platform device add failed\n"); - goto error; + goto error_sound; } dev_set_drvdata(&pdev->dev, sound_device); @@ -502,14 +504,12 @@ static int mpc8610_hpcd_probe(struct platform_device *pdev) return 0; +error_sound: + platform_device_unregister(sound_device); error: - of_node_put(codec_np); - - if (sound_device) - platform_device_unregister(sound_device); - kfree(machine_data); - +error_alloc: + of_node_put(codec_np); return ret; } diff --git a/sound/soc/fsl/p1022_ds.c b/sound/soc/fsl/p1022_ds.c index 8fa4d5f8eda..fcb862eb0c7 100644 --- a/sound/soc/fsl/p1022_ds.c +++ b/sound/soc/fsl/p1022_ds.c @@ -297,8 +297,10 @@ static int get_dma_channel(struct device_node *ssi_np, * dai->platform name should already point to an allocated buffer. */ ret = of_address_to_resource(dma_channel_np, 0, &res); - if (ret) + if (ret) { + of_node_put(dma_channel_np); return ret; + } snprintf((char *)dai->platform_name, DAI_NAME_SIZE, "%llx.%s", (unsigned long long) res.start, dma_channel_np->name); diff --git a/sound/soc/imx/imx-pcm-fiq.c b/sound/soc/imx/imx-pcm-fiq.c index 309c59e6fb6..7945625e0e0 100644 --- a/sound/soc/imx/imx-pcm-fiq.c +++ b/sound/soc/imx/imx-pcm-fiq.c @@ -240,7 +240,6 @@ static int ssi_irq = 0; static int imx_pcm_fiq_new(struct snd_soc_pcm_runtime *rtd) { - struct snd_card *card = rtd->card->snd_card; struct snd_soc_dai *dai = rtd->cpu_dai; struct snd_pcm *pcm = rtd->pcm; int ret; diff --git a/sound/soc/kirkwood/kirkwood-i2s.c b/sound/soc/kirkwood/kirkwood-i2s.c index a33fc51f363..d0bcf3fcea0 100644 --- a/sound/soc/kirkwood/kirkwood-i2s.c +++ b/sound/soc/kirkwood/kirkwood-i2s.c @@ -424,7 +424,7 @@ static __devinit int kirkwood_i2s_dev_probe(struct platform_device *pdev) if (!priv->mem) { dev_err(&pdev->dev, "request_mem_region failed\n"); err = -EBUSY; - goto error; + goto err_alloc; } priv->io = ioremap(priv->mem->start, SZ_16K); diff --git a/sound/soc/omap/ams-delta.c b/sound/soc/omap/ams-delta.c index 30fe0d0efe1..0aa475f92ef 100644 --- a/sound/soc/omap/ams-delta.c +++ b/sound/soc/omap/ams-delta.c @@ -514,7 +514,7 @@ static int ams_delta_cx20442_init(struct snd_soc_pcm_runtime *rtd) } /* Set codec bias level */ - ams_delta_set_bias_level(card, SND_SOC_BIAS_STANDBY); + ams_delta_set_bias_level(card, dapm, SND_SOC_BIAS_STANDBY); /* Add hook switch - can be used to control the codec from userspace * even if line discipline fails */ @@ -649,7 +649,9 @@ static void __exit ams_delta_module_exit(void) ams_delta_hook_switch_gpios); /* Keep modem power on */ - ams_delta_set_bias_level(&ams_delta_audio_card, SND_SOC_BIAS_STANDBY); + ams_delta_set_bias_level(&ams_delta_audio_card, + &ams_delta_audio_card.rtd[0].codec->dapm, + SND_SOC_BIAS_STANDBY); platform_device_unregister(cx20442_platform_device); platform_device_unregister(ams_delta_audio_platform_device); diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index ebcc2d4d2b1..478d6077845 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -516,6 +516,12 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai, struct omap_mcbsp_reg_cfg *regs = &mcbsp_data->regs; int err = 0; + if (mcbsp_data->active) + if (freq == mcbsp_data->in_freq) + return 0; + else + return -EBUSY; + /* The McBSP signal muxing functions are only available on McBSP1 */ if (clk_id == OMAP_MCBSP_CLKR_SRC_CLKR || clk_id == OMAP_MCBSP_CLKR_SRC_CLKX || diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig index b99091fc34e..65f980ef287 100644 --- a/sound/soc/samsung/Kconfig +++ b/sound/soc/samsung/Kconfig @@ -185,6 +185,7 @@ config SND_SOC_SPEYSIDE select SND_SAMSUNG_I2S select SND_SOC_WM8996 select SND_SOC_WM9081 + select SND_SOC_WM1250_EV1 config SND_SOC_SPEYSIDE_WM8962 tristate "Audio support for Wolfson Speyside with WM8962" diff --git a/sound/soc/samsung/ac97.c b/sound/soc/samsung/ac97.c index f97110e72e8..b4f9b000368 100644 --- a/sound/soc/samsung/ac97.c +++ b/sound/soc/samsung/ac97.c @@ -271,7 +271,10 @@ static int s3c_ac97_trigger(struct snd_pcm_substream *substream, int cmd, writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL); - s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED); + if (!dma_data->ops) + dma_data->ops = samsung_dma_get_ops(); + + dma_data->ops->started(dma_data->channel); return 0; } @@ -317,7 +320,10 @@ static int s3c_ac97_mic_trigger(struct snd_pcm_substream *substream, writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL); - s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED); + if (!dma_data->ops) + dma_data->ops = samsung_dma_get_ops(); + + dma_data->ops->started(dma_data->channel); return 0; } diff --git a/sound/soc/samsung/dma.c b/sound/soc/samsung/dma.c index 9465588b02f..2d622b635e6 100644 --- a/sound/soc/samsung/dma.c +++ b/sound/soc/samsung/dma.c @@ -54,7 +54,6 @@ struct runtime_data { spinlock_t lock; int state; unsigned int dma_loaded; - unsigned int dma_limit; unsigned int dma_period; dma_addr_t dma_start; dma_addr_t dma_pos; @@ -62,77 +61,79 @@ struct runtime_data { struct s3c_dma_params *params; }; +static void audio_buffdone(void *data); + /* dma_enqueue * * place a dma buffer onto the queue for the dma system * to handle. -*/ + */ static void dma_enqueue(struct snd_pcm_substream *substream) { struct runtime_data *prtd = substream->runtime->private_data; dma_addr_t pos = prtd->dma_pos; unsigned int limit; - int ret; + struct samsung_dma_prep_info dma_info; pr_debug("Entered %s\n", __func__); - if (s3c_dma_has_circular()) - limit = (prtd->dma_end - prtd->dma_start) / prtd->dma_period; - else - limit = prtd->dma_limit; + limit = (prtd->dma_end - prtd->dma_start) / prtd->dma_period; pr_debug("%s: loaded %d, limit %d\n", __func__, prtd->dma_loaded, limit); - while (prtd->dma_loaded < limit) { - unsigned long len = prtd->dma_period; + dma_info.cap = (samsung_dma_has_circular() ? DMA_CYCLIC : DMA_SLAVE); + dma_info.direction = + (substream->stream == SNDRV_PCM_STREAM_PLAYBACK + ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + dma_info.fp = audio_buffdone; + dma_info.fp_param = substream; + dma_info.period = prtd->dma_period; + dma_info.len = prtd->dma_period*limit; + while (prtd->dma_loaded < limit) { pr_debug("dma_loaded: %d\n", prtd->dma_loaded); - if ((pos + len) > prtd->dma_end) { - len = prtd->dma_end - pos; - pr_debug("%s: corrected dma len %ld\n", __func__, len); + if ((pos + dma_info.period) > prtd->dma_end) { + dma_info.period = prtd->dma_end - pos; + pr_debug("%s: corrected dma len %ld\n", + __func__, dma_info.period); } - ret = s3c2410_dma_enqueue(prtd->params->channel, - substream, pos, len); + dma_info.buf = pos; + prtd->params->ops->prepare(prtd->params->ch, &dma_info); - if (ret == 0) { - prtd->dma_loaded++; - pos += prtd->dma_period; - if (pos >= prtd->dma_end) - pos = prtd->dma_start; - } else - break; + prtd->dma_loaded++; + pos += prtd->dma_period; + if (pos >= prtd->dma_end) + pos = prtd->dma_start; } prtd->dma_pos = pos; } -static void audio_buffdone(struct s3c2410_dma_chan *channel, - void *dev_id, int size, - enum s3c2410_dma_buffresult result) +static void audio_buffdone(void *data) { - struct snd_pcm_substream *substream = dev_id; - struct runtime_data *prtd; + struct snd_pcm_substream *substream = data; + struct runtime_data *prtd = substream->runtime->private_data; pr_debug("Entered %s\n", __func__); - if (result == S3C2410_RES_ABORT || result == S3C2410_RES_ERR) - return; - - prtd = substream->runtime->private_data; + if (prtd->state & ST_RUNNING) { + prtd->dma_pos += prtd->dma_period; + if (prtd->dma_pos >= prtd->dma_end) + prtd->dma_pos = prtd->dma_start; - if (substream) - snd_pcm_period_elapsed(substream); + if (substream) + snd_pcm_period_elapsed(substream); - spin_lock(&prtd->lock); - if (prtd->state & ST_RUNNING && !s3c_dma_has_circular()) { - prtd->dma_loaded--; - dma_enqueue(substream); + spin_lock(&prtd->lock); + if (!samsung_dma_has_circular()) { + prtd->dma_loaded--; + dma_enqueue(substream); + } + spin_unlock(&prtd->lock); } - - spin_unlock(&prtd->lock); } static int dma_hw_params(struct snd_pcm_substream *substream, @@ -144,8 +145,7 @@ static int dma_hw_params(struct snd_pcm_substream *substream, unsigned long totbytes = params_buffer_bytes(params); struct s3c_dma_params *dma = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream); - int ret = 0; - + struct samsung_dma_info dma_info; pr_debug("Entered %s\n", __func__); @@ -163,30 +163,26 @@ static int dma_hw_params(struct snd_pcm_substream *substream, pr_debug("params %p, client %p, channel %d\n", prtd->params, prtd->params->client, prtd->params->channel); - ret = s3c2410_dma_request(prtd->params->channel, - prtd->params->client, NULL); - - if (ret < 0) { - printk(KERN_ERR "failed to get dma channel\n"); - return ret; - } - - /* use the circular buffering if we have it available. */ - if (s3c_dma_has_circular()) - s3c2410_dma_setflags(prtd->params->channel, - S3C2410_DMAF_CIRCULAR); + prtd->params->ops = samsung_dma_get_ops(); + + dma_info.cap = (samsung_dma_has_circular() ? + DMA_CYCLIC : DMA_SLAVE); + dma_info.client = prtd->params->client; + dma_info.direction = + (substream->stream == SNDRV_PCM_STREAM_PLAYBACK + ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + dma_info.width = prtd->params->dma_size; + dma_info.fifo = prtd->params->dma_addr; + prtd->params->ch = prtd->params->ops->request( + prtd->params->channel, &dma_info); } - s3c2410_dma_set_buffdone_fn(prtd->params->channel, - audio_buffdone); - snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); runtime->dma_bytes = totbytes; spin_lock_irq(&prtd->lock); prtd->dma_loaded = 0; - prtd->dma_limit = runtime->hw.periods_min; prtd->dma_period = params_period_bytes(params); prtd->dma_start = runtime->dma_addr; prtd->dma_pos = prtd->dma_start; @@ -202,11 +198,12 @@ static int dma_hw_free(struct snd_pcm_substream *substream) pr_debug("Entered %s\n", __func__); - /* TODO - do we need to ensure DMA flushed */ snd_pcm_set_runtime_buffer(substream, NULL); if (prtd->params) { - s3c2410_dma_free(prtd->params->channel, prtd->params->client); + prtd->params->ops->flush(prtd->params->ch); + prtd->params->ops->release(prtd->params->ch, + prtd->params->client); prtd->params = NULL; } @@ -225,23 +222,9 @@ static int dma_prepare(struct snd_pcm_substream *substream) if (!prtd->params) return 0; - /* channel needs configuring for mem=>device, increment memory addr, - * sync to pclk, half-word transfers to the IIS-FIFO. */ - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - s3c2410_dma_devconfig(prtd->params->channel, - S3C2410_DMASRC_MEM, - prtd->params->dma_addr); - } else { - s3c2410_dma_devconfig(prtd->params->channel, - S3C2410_DMASRC_HW, - prtd->params->dma_addr); - } - - s3c2410_dma_config(prtd->params->channel, - prtd->params->dma_size); - /* flush the DMA channel */ - s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_FLUSH); + prtd->params->ops->flush(prtd->params->ch); + prtd->dma_loaded = 0; prtd->dma_pos = prtd->dma_start; @@ -265,14 +248,14 @@ static int dma_trigger(struct snd_pcm_substream *substream, int cmd) case SNDRV_PCM_TRIGGER_RESUME: case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: prtd->state |= ST_RUNNING; - s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_START); + prtd->params->ops->trigger(prtd->params->ch); break; case SNDRV_PCM_TRIGGER_STOP: case SNDRV_PCM_TRIGGER_SUSPEND: case SNDRV_PCM_TRIGGER_PAUSE_PUSH: prtd->state &= ~ST_RUNNING; - s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_STOP); + prtd->params->ops->stop(prtd->params->ch); break; default: @@ -291,21 +274,12 @@ dma_pointer(struct snd_pcm_substream *substream) struct snd_pcm_runtime *runtime = substream->runtime; struct runtime_data *prtd = runtime->private_data; unsigned long res; - dma_addr_t src, dst; pr_debug("Entered %s\n", __func__); - spin_lock(&prtd->lock); - s3c2410_dma_getposition(prtd->params->channel, &src, &dst); - - if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) - res = dst - prtd->dma_start; - else - res = src - prtd->dma_start; - - spin_unlock(&prtd->lock); + res = prtd->dma_pos - prtd->dma_start; - pr_debug("Pointer %x %x\n", src, dst); + pr_debug("Pointer offset: %lu\n", res); /* we seem to be getting the odd error from the pcm library due * to out-of-bounds pointers. this is maybe due to the dma engine diff --git a/sound/soc/samsung/dma.h b/sound/soc/samsung/dma.h index c50659269a4..7d1ead77ef2 100644 --- a/sound/soc/samsung/dma.h +++ b/sound/soc/samsung/dma.h @@ -6,7 +6,7 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * - * ALSA PCM interface for the Samsung S3C24xx CPU + * ALSA PCM interface for the Samsung SoC */ #ifndef _S3C_AUDIO_H @@ -17,6 +17,8 @@ struct s3c_dma_params { int channel; /* Channel ID */ dma_addr_t dma_addr; int dma_size; /* Size of the DMA transfer */ + unsigned ch; + struct samsung_dma_ops *ops; }; #endif diff --git a/sound/soc/samsung/h1940_uda1380.c b/sound/soc/samsung/h1940_uda1380.c index 241f55d0066..c6c65892294 100644 --- a/sound/soc/samsung/h1940_uda1380.c +++ b/sound/soc/samsung/h1940_uda1380.c @@ -13,6 +13,7 @@ * */ +#include <linux/types.h> #include <linux/gpio.h> #include <sound/soc.h> diff --git a/sound/soc/samsung/rx1950_uda1380.c b/sound/soc/samsung/rx1950_uda1380.c index 1e574a5d440..bc8c1676459 100644 --- a/sound/soc/samsung/rx1950_uda1380.c +++ b/sound/soc/samsung/rx1950_uda1380.c @@ -17,6 +17,7 @@ * */ +#include <linux/types.h> #include <linux/gpio.h> #include <sound/soc.h> diff --git a/sound/soc/samsung/speyside_wm8962.c b/sound/soc/samsung/speyside_wm8962.c index 0b9eb5f7ec4..72535f2daaf 100644 --- a/sound/soc/samsung/speyside_wm8962.c +++ b/sound/soc/samsung/speyside_wm8962.c @@ -23,6 +23,9 @@ static int speyside_wm8962_set_bias_level(struct snd_soc_card *card, struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai; int ret; + if (dapm->dev != codec_dai->dev) + return 0; + switch (level) { case SND_SOC_BIAS_PREPARE: if (dapm->bias_level == SND_SOC_BIAS_STANDBY) { @@ -57,6 +60,9 @@ static int speyside_wm8962_set_bias_level_post(struct snd_soc_card *card, struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai; int ret; + if (dapm->dev != codec_dai->dev) + return 0; + switch (level) { case SND_SOC_BIAS_STANDBY: ret = snd_soc_dai_set_sysclk(codec_dai, WM8962_SYSCLK_MCLK, diff --git a/sound/soc/soc-cache.c b/sound/soc/soc-cache.c index d9f8aded51f..20b7f3b003a 100644 --- a/sound/soc/soc-cache.c +++ b/sound/soc/soc-cache.c @@ -203,14 +203,14 @@ static int snd_soc_rbtree_cache_sync(struct snd_soc_codec *codec) rbnode = rb_entry(node, struct snd_soc_rbtree_node, node); for (i = 0; i < rbnode->blklen; ++i) { regtmp = rbnode->base_reg + i; - WARN_ON(codec->writable_register && - codec->writable_register(codec, regtmp)); val = snd_soc_rbtree_get_register(rbnode, i); def = snd_soc_get_cache_val(codec->reg_def_copy, i, rbnode->word_size); if (val == def) continue; + WARN_ON(!snd_soc_codec_writable_register(codec, regtmp)); + codec->cache_bypass = 1; ret = snd_soc_write(codec, regtmp, val); codec->cache_bypass = 0; @@ -563,8 +563,7 @@ static int snd_soc_lzo_cache_sync(struct snd_soc_codec *codec) lzo_blocks = codec->reg_cache; for_each_set_bit(i, lzo_blocks[0]->sync_bmp, lzo_blocks[0]->sync_bmp_nbits) { - WARN_ON(codec->writable_register && - codec->writable_register(codec, i)); + WARN_ON(!snd_soc_codec_writable_register(codec, i)); ret = snd_soc_cache_read(codec, i, &val); if (ret) return ret; @@ -823,8 +822,6 @@ static int snd_soc_flat_cache_sync(struct snd_soc_codec *codec) codec_drv = codec->driver; for (i = 0; i < codec_drv->reg_cache_size; ++i) { - WARN_ON(codec->writable_register && - codec->writable_register(codec, i)); ret = snd_soc_cache_read(codec, i, &val); if (ret) return ret; @@ -832,6 +829,9 @@ static int snd_soc_flat_cache_sync(struct snd_soc_codec *codec) if (snd_soc_get_cache_val(codec->reg_def_copy, i, codec_drv->reg_word_size) == val) continue; + + WARN_ON(!snd_soc_codec_writable_register(codec, i)); + ret = snd_soc_write(codec, i, val); if (ret) return ret; diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 83ad8ca2749..ef69f5a0270 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -30,6 +30,7 @@ #include <linux/bitops.h> #include <linux/debugfs.h> #include <linux/platform_device.h> +#include <linux/ctype.h> #include <linux/slab.h> #include <sound/ac97_codec.h> #include <sound/core.h> @@ -1434,9 +1435,20 @@ static void snd_soc_instantiate_card(struct snd_soc_card *card) "%s", card->name); snprintf(card->snd_card->longname, sizeof(card->snd_card->longname), "%s", card->long_name ? card->long_name : card->name); - if (card->driver_name) - strlcpy(card->snd_card->driver, card->driver_name, - sizeof(card->snd_card->driver)); + snprintf(card->snd_card->driver, sizeof(card->snd_card->driver), + "%s", card->driver_name ? card->driver_name : card->name); + for (i = 0; i < ARRAY_SIZE(card->snd_card->driver); i++) { + switch (card->snd_card->driver[i]) { + case '_': + case '-': + case '\0': + break; + default: + if (!isalnum(card->snd_card->driver[i])) + card->snd_card->driver[i] = '_'; + break; + } + } if (card->late_probe) { ret = card->late_probe(card); @@ -1633,7 +1645,7 @@ int snd_soc_codec_readable_register(struct snd_soc_codec *codec, if (codec->readable_register) return codec->readable_register(codec, reg); else - return 0; + return 1; } EXPORT_SYMBOL_GPL(snd_soc_codec_readable_register); @@ -1651,7 +1663,7 @@ int snd_soc_codec_writable_register(struct snd_soc_codec *codec, if (codec->writable_register) return codec->writable_register(codec, reg); else - return 0; + return 1; } EXPORT_SYMBOL_GPL(snd_soc_codec_writable_register); @@ -1913,7 +1925,7 @@ struct snd_kcontrol *snd_soc_cnew(const struct snd_kcontrol_new *_template, if (prefix) { name_len = strlen(long_name) + strlen(prefix) + 2; - name = kmalloc(name_len, GFP_ATOMIC); + name = kmalloc(name_len, GFP_KERNEL); if (!name) return NULL; diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 7e15914b363..d67c637557a 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -2763,7 +2763,7 @@ EXPORT_SYMBOL_GPL(snd_soc_dapm_ignore_suspend); /** * snd_soc_dapm_free - free dapm resources - * @card: SoC device + * @dapm: DAPM context * * Free all dapm widgets and resources. */ diff --git a/sound/soc/soc-io.c b/sound/soc/soc-io.c index cca490c8058..a62f7dd4ba9 100644 --- a/sound/soc/soc-io.c +++ b/sound/soc/soc-io.c @@ -205,6 +205,25 @@ static unsigned int snd_soc_16_8_read_i2c(struct snd_soc_codec *codec, #define snd_soc_16_8_read_i2c NULL #endif +#if defined(CONFIG_SPI_MASTER) +static unsigned int snd_soc_16_8_read_spi(struct snd_soc_codec *codec, + unsigned int r) +{ + struct spi_device *spi = codec->control_data; + + const u16 reg = cpu_to_be16(r | 0x100); + u8 data; + int ret; + + ret = spi_write_then_read(spi, ®, 2, &data, 1); + if (ret < 0) + return 0; + return data; +} +#else +#define snd_soc_16_8_read_spi NULL +#endif + static int snd_soc_16_8_write(struct snd_soc_codec *codec, unsigned int reg, unsigned int value) { @@ -295,6 +314,7 @@ static struct { int (*write)(struct snd_soc_codec *codec, unsigned int, unsigned int); unsigned int (*read)(struct snd_soc_codec *, unsigned int); unsigned int (*i2c_read)(struct snd_soc_codec *, unsigned int); + unsigned int (*spi_read)(struct snd_soc_codec *, unsigned int); } io_types[] = { { .addr_bits = 4, .data_bits = 12, @@ -318,6 +338,7 @@ static struct { .addr_bits = 16, .data_bits = 8, .write = snd_soc_16_8_write, .i2c_read = snd_soc_16_8_read_i2c, + .spi_read = snd_soc_16_8_read_spi, }, { .addr_bits = 16, .data_bits = 16, @@ -383,6 +404,8 @@ int snd_soc_codec_set_cache_io(struct snd_soc_codec *codec, #ifdef CONFIG_SPI_MASTER codec->hw_write = do_spi_write; #endif + if (io_types[i].spi_read) + codec->hw_read = io_types[i].spi_read; codec->control_data = container_of(codec->dev, struct spi_device, diff --git a/sound/soc/soc-jack.c b/sound/soc/soc-jack.c index 7c17b98d584..fa31d9c2abd 100644 --- a/sound/soc/soc-jack.c +++ b/sound/soc/soc-jack.c @@ -105,7 +105,7 @@ void snd_soc_jack_report(struct snd_soc_jack *jack, int status, int mask) snd_soc_dapm_sync(dapm); - snd_jack_report(jack->jack, status); + snd_jack_report(jack->jack, jack->status); out: mutex_unlock(&codec->mutex); @@ -327,7 +327,7 @@ int snd_soc_jack_add_gpios(struct snd_soc_jack *jack, int count, IRQF_TRIGGER_FALLING, gpios[i].name, &gpios[i]); - if (ret) + if (ret < 0) goto err; if (gpios[i].wake) { diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index b5759397afa..2879c883eeb 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -290,6 +290,9 @@ static int soc_pcm_close(struct snd_pcm_substream *substream) codec_dai->active--; codec->active--; + if (!cpu_dai->active && !codec_dai->active) + rtd->rate = 0; + /* Muting the DAC suppresses artifacts caused during digital * shutdown, for example from stopping clocks. */ diff --git a/sound/soc/tegra/tegra_wm8903.c b/sound/soc/tegra/tegra_wm8903.c index 661373c2352..be27f1d229a 100644 --- a/sound/soc/tegra/tegra_wm8903.c +++ b/sound/soc/tegra/tegra_wm8903.c @@ -319,7 +319,7 @@ static int tegra_wm8903_init(struct snd_soc_pcm_runtime *rtd) snd_soc_dapm_force_enable_pin(dapm, "Mic Bias"); /* FIXME: Calculate automatically based on DAPM routes? */ - if (!machine_is_harmony() && !machine_is_ventana()) + if (!machine_is_harmony()) snd_soc_dapm_nc_pin(dapm, "IN1L"); if (!machine_is_seaboard() && !machine_is_aebl()) snd_soc_dapm_nc_pin(dapm, "IN1R"); @@ -395,7 +395,7 @@ static __devinit int tegra_wm8903_driver_probe(struct platform_device *pdev) platform_set_drvdata(pdev, card); snd_soc_card_set_drvdata(card, machine); - if (machine_is_harmony() || machine_is_ventana()) { + if (machine_is_harmony()) { card->dapm_routes = harmony_audio_map; card->num_dapm_routes = ARRAY_SIZE(harmony_audio_map); } else if (machine_is_seaboard()) { diff --git a/sound/usb/card.c b/sound/usb/card.c index 781d9e61adf..d8f2bf40145 100644 --- a/sound/usb/card.c +++ b/sound/usb/card.c @@ -530,8 +530,11 @@ snd_usb_audio_probe(struct usb_device *dev, return chip; __error: - if (chip && !chip->num_interfaces) - snd_card_free(chip->card); + if (chip) { + if (!chip->num_interfaces) + snd_card_free(chip->card); + chip->probing = 0; + } mutex_unlock(®ister_mutex); __err_val: return NULL; diff --git a/tools/perf/Makefile b/tools/perf/Makefile index 3b8f7b80376..e9d5c271db6 100644 --- a/tools/perf/Makefile +++ b/tools/perf/Makefile @@ -30,6 +30,8 @@ endif # Define EXTRA_CFLAGS=-m64 or EXTRA_CFLAGS=-m32 as appropriate for cross-builds. # # Define NO_DWARF if you do not want debug-info analysis feature at all. +# +# Define WERROR=0 to disable treating any warnings as errors. $(OUTPUT)PERF-VERSION-FILE: .FORCE-PERF-VERSION-FILE @$(SHELL_PATH) util/PERF-VERSION-GEN $(OUTPUT) @@ -63,6 +65,11 @@ ifeq ($(ARCH),x86_64) endif endif +# Treat warnings as errors unless directed not to +ifneq ($(WERROR),0) + CFLAGS_WERROR := -Werror +endif + # # Include saner warnings here, which can catch bugs: # @@ -95,7 +102,7 @@ ifndef PERF_DEBUG CFLAGS_OPTIMIZE = -O6 endif -CFLAGS = -fno-omit-frame-pointer -ggdb3 -Wall -Wextra -std=gnu99 -Werror $(CFLAGS_OPTIMIZE) -D_FORTIFY_SOURCE=2 $(EXTRA_WARNINGS) $(EXTRA_CFLAGS) +CFLAGS = -fno-omit-frame-pointer -ggdb3 -Wall -Wextra -std=gnu99 $(CFLAGS_WERROR) $(CFLAGS_OPTIMIZE) -D_FORTIFY_SOURCE=2 $(EXTRA_WARNINGS) $(EXTRA_CFLAGS) EXTLIBS = -lpthread -lrt -lelf -lm ALL_CFLAGS = $(CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 ALL_LDFLAGS = $(LDFLAGS) diff --git a/tools/perf/arch/arm/util/dwarf-regs.c b/tools/perf/arch/arm/util/dwarf-regs.c index fff6450c8c9..e8d5c551c69 100644 --- a/tools/perf/arch/arm/util/dwarf-regs.c +++ b/tools/perf/arch/arm/util/dwarf-regs.c @@ -8,7 +8,10 @@ * published by the Free Software Foundation. */ +#include <stdlib.h> +#ifndef __UCLIBC__ #include <libio.h> +#endif #include <dwarf-regs.h> struct pt_regs_dwarfnum { diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c index 6b0519f885e..f4c3fbee4ba 100644 --- a/tools/perf/builtin-record.c +++ b/tools/perf/builtin-record.c @@ -161,6 +161,7 @@ static void config_attr(struct perf_evsel *evsel, struct perf_evlist *evlist) struct perf_event_attr *attr = &evsel->attr; int track = !evsel->idx; /* only the first counter needs these */ + attr->disabled = 1; attr->inherit = !no_inherit; attr->read_format = PERF_FORMAT_TOTAL_TIME_ENABLED | PERF_FORMAT_TOTAL_TIME_RUNNING | @@ -671,6 +672,8 @@ static int __cmd_record(int argc, const char **argv) } } + perf_evlist__enable(evsel_list); + /* * Let the child rip */ diff --git a/tools/perf/builtin-test.c b/tools/perf/builtin-test.c index 55f4c76f282..efe696f936e 100644 --- a/tools/perf/builtin-test.c +++ b/tools/perf/builtin-test.c @@ -561,7 +561,7 @@ static int test__basic_mmap(void) } err = perf_event__parse_sample(event, attr.sample_type, sample_size, - false, &sample); + false, &sample, false); if (err) { pr_err("Can't parse sample, err = %d\n", err); goto out_munmap; diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c index a43433f0830..d28013b7d61 100644 --- a/tools/perf/builtin-top.c +++ b/tools/perf/builtin-top.c @@ -191,7 +191,8 @@ static void __zero_source_counters(struct sym_entry *syme) symbol__annotate_zero_histograms(sym); } -static void record_precise_ip(struct sym_entry *syme, int counter, u64 ip) +static void record_precise_ip(struct sym_entry *syme, struct map *map, + int counter, u64 ip) { struct annotation *notes; struct symbol *sym; @@ -205,8 +206,8 @@ static void record_precise_ip(struct sym_entry *syme, int counter, u64 ip) if (pthread_mutex_trylock(¬es->lock)) return; - ip = syme->map->map_ip(syme->map, ip); - symbol__inc_addr_samples(sym, syme->map, counter, ip); + ip = map->map_ip(map, ip); + symbol__inc_addr_samples(sym, map, counter, ip); pthread_mutex_unlock(¬es->lock); } @@ -810,7 +811,7 @@ static void perf_event__process_sample(const union perf_event *event, evsel = perf_evlist__id2evsel(top.evlist, sample->id); assert(evsel != NULL); syme->count[evsel->idx]++; - record_precise_ip(syme, evsel->idx, ip); + record_precise_ip(syme, al.map, evsel->idx, ip); pthread_mutex_lock(&top.active_symbols_lock); if (list_empty(&syme->node) || !syme->node.next) { static bool first = true; diff --git a/tools/perf/util/event.c b/tools/perf/util/event.c index 3c1b8a63210..437f8ca679a 100644 --- a/tools/perf/util/event.c +++ b/tools/perf/util/event.c @@ -169,12 +169,17 @@ static int perf_event__synthesize_mmap_events(union perf_event *event, continue; pbf += n + 3; if (*pbf == 'x') { /* vm_exec */ + char anonstr[] = "//anon\n"; char *execname = strchr(bf, '/'); /* Catch VDSO */ if (execname == NULL) execname = strstr(bf, "[vdso]"); + /* Catch anonymous mmaps */ + if ((execname == NULL) && !strstr(bf, "[")) + execname = anonstr; + if (execname == NULL) continue; diff --git a/tools/perf/util/event.h b/tools/perf/util/event.h index 1d7f66488a8..357a85b8524 100644 --- a/tools/perf/util/event.h +++ b/tools/perf/util/event.h @@ -186,6 +186,6 @@ const char *perf_event__name(unsigned int id); int perf_event__parse_sample(const union perf_event *event, u64 type, int sample_size, bool sample_id_all, - struct perf_sample *sample); + struct perf_sample *sample, bool swapped); #endif /* __PERF_RECORD_H */ diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c index c12bd476c6f..72e9f4886b6 100644 --- a/tools/perf/util/evlist.c +++ b/tools/perf/util/evlist.c @@ -113,6 +113,19 @@ void perf_evlist__disable(struct perf_evlist *evlist) } } +void perf_evlist__enable(struct perf_evlist *evlist) +{ + int cpu, thread; + struct perf_evsel *pos; + + for (cpu = 0; cpu < evlist->cpus->nr; cpu++) { + list_for_each_entry(pos, &evlist->entries, node) { + for (thread = 0; thread < evlist->threads->nr; thread++) + ioctl(FD(pos, cpu, thread), PERF_EVENT_IOC_ENABLE); + } + } +} + int perf_evlist__alloc_pollfd(struct perf_evlist *evlist) { int nfds = evlist->cpus->nr * evlist->threads->nr * evlist->nr_entries; diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h index ce85ae9ae57..f3491500274 100644 --- a/tools/perf/util/evlist.h +++ b/tools/perf/util/evlist.h @@ -54,6 +54,7 @@ int perf_evlist__mmap(struct perf_evlist *evlist, int pages, bool overwrite); void perf_evlist__munmap(struct perf_evlist *evlist); void perf_evlist__disable(struct perf_evlist *evlist); +void perf_evlist__enable(struct perf_evlist *evlist); static inline void perf_evlist__set_maps(struct perf_evlist *evlist, struct cpu_map *cpus, diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c index a03a36b7908..c5748c52318 100644 --- a/tools/perf/util/evsel.c +++ b/tools/perf/util/evsel.c @@ -7,6 +7,8 @@ * Released under the GPL v2. (and only v2, not any later version) */ +#include <byteswap.h> +#include "asm/bug.h" #include "evsel.h" #include "evlist.h" #include "util.h" @@ -342,10 +344,20 @@ static bool sample_overlap(const union perf_event *event, int perf_event__parse_sample(const union perf_event *event, u64 type, int sample_size, bool sample_id_all, - struct perf_sample *data) + struct perf_sample *data, bool swapped) { const u64 *array; + /* + * used for cross-endian analysis. See git commit 65014ab3 + * for why this goofiness is needed. + */ + union { + u64 val64; + u32 val32[2]; + } u; + + data->cpu = data->pid = data->tid = -1; data->stream_id = data->id = data->time = -1ULL; @@ -366,9 +378,16 @@ int perf_event__parse_sample(const union perf_event *event, u64 type, } if (type & PERF_SAMPLE_TID) { - u32 *p = (u32 *)array; - data->pid = p[0]; - data->tid = p[1]; + u.val64 = *array; + if (swapped) { + /* undo swap of u64, then swap on individual u32s */ + u.val64 = bswap_64(u.val64); + u.val32[0] = bswap_32(u.val32[0]); + u.val32[1] = bswap_32(u.val32[1]); + } + + data->pid = u.val32[0]; + data->tid = u.val32[1]; array++; } @@ -395,8 +414,15 @@ int perf_event__parse_sample(const union perf_event *event, u64 type, } if (type & PERF_SAMPLE_CPU) { - u32 *p = (u32 *)array; - data->cpu = *p; + + u.val64 = *array; + if (swapped) { + /* undo swap of u64, then swap on individual u32s */ + u.val64 = bswap_64(u.val64); + u.val32[0] = bswap_32(u.val32[0]); + } + + data->cpu = u.val32[0]; array++; } @@ -423,18 +449,24 @@ int perf_event__parse_sample(const union perf_event *event, u64 type, } if (type & PERF_SAMPLE_RAW) { - u32 *p = (u32 *)array; + u.val64 = *array; + if (WARN_ONCE(swapped, + "Endianness of raw data not corrected!\n")) { + /* undo swap of u64, then swap on individual u32s */ + u.val64 = bswap_64(u.val64); + u.val32[0] = bswap_32(u.val32[0]); + u.val32[1] = bswap_32(u.val32[1]); + } if (sample_overlap(event, array, sizeof(u32))) return -EFAULT; - data->raw_size = *p; - p++; + data->raw_size = u.val32[0]; - if (sample_overlap(event, p, data->raw_size)) + if (sample_overlap(event, &u.val32[1], data->raw_size)) return -EFAULT; - data->raw_data = p; + data->raw_data = &u.val32[1]; } return 0; diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c index 555fc3864b9..5d732621a46 100644 --- a/tools/perf/util/probe-finder.c +++ b/tools/perf/util/probe-finder.c @@ -659,7 +659,7 @@ static int find_variable(Dwarf_Die *sc_die, struct probe_finder *pf) if (!die_find_variable_at(&pf->cu_die, pf->pvar->var, 0, &vr_die)) ret = -ENOENT; } - if (ret == 0) + if (ret >= 0) ret = convert_variable(&vr_die, pf); if (ret < 0) diff --git a/tools/perf/util/python.c b/tools/perf/util/python.c index cbc8f215d4b..7624324efad 100644 --- a/tools/perf/util/python.c +++ b/tools/perf/util/python.c @@ -803,7 +803,7 @@ static PyObject *pyrf_evlist__read_on_cpu(struct pyrf_evlist *pevlist, first = list_entry(evlist->entries.next, struct perf_evsel, node); err = perf_event__parse_sample(event, first->attr.sample_type, perf_evsel__sample_size(first), - sample_id_all, &pevent->sample); + sample_id_all, &pevent->sample, false); if (err) return PyErr_Format(PyExc_OSError, "perf: can't parse sample, err=%d", err); diff --git a/tools/perf/util/session.h b/tools/perf/util/session.h index 170601e67d6..974d0cbee5e 100644 --- a/tools/perf/util/session.h +++ b/tools/perf/util/session.h @@ -162,7 +162,8 @@ static inline int perf_session__parse_sample(struct perf_session *session, { return perf_event__parse_sample(event, session->sample_type, session->sample_size, - session->sample_id_all, sample); + session->sample_id_all, sample, + session->header.needs_swap); } struct perf_evsel *perf_session__find_first_evtype(struct perf_session *session, diff --git a/tools/perf/util/sort.c b/tools/perf/util/sort.c index 401e220566f..1ee8f1e40f1 100644 --- a/tools/perf/util/sort.c +++ b/tools/perf/util/sort.c @@ -151,11 +151,17 @@ sort__sym_cmp(struct hist_entry *left, struct hist_entry *right) { u64 ip_l, ip_r; + if (!left->ms.sym && !right->ms.sym) + return right->level - left->level; + + if (!left->ms.sym || !right->ms.sym) + return cmp_null(left->ms.sym, right->ms.sym); + if (left->ms.sym == right->ms.sym) return 0; - ip_l = left->ms.sym ? left->ms.sym->start : left->ip; - ip_r = right->ms.sym ? right->ms.sym->start : right->ip; + ip_l = left->ms.sym->start; + ip_r = right->ms.sym->start; return (int64_t)(ip_r - ip_l); } diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c index 469c0264ed2..40eeaf07725 100644 --- a/tools/perf/util/symbol.c +++ b/tools/perf/util/symbol.c @@ -74,16 +74,104 @@ static void dso__set_sorted_by_name(struct dso *dso, enum map_type type) bool symbol_type__is_a(char symbol_type, enum map_type map_type) { + symbol_type = toupper(symbol_type); + switch (map_type) { case MAP__FUNCTION: return symbol_type == 'T' || symbol_type == 'W'; case MAP__VARIABLE: - return symbol_type == 'D' || symbol_type == 'd'; + return symbol_type == 'D'; default: return false; } } +static int prefix_underscores_count(const char *str) +{ + const char *tail = str; + + while (*tail == '_') + tail++; + + return tail - str; +} + +#define SYMBOL_A 0 +#define SYMBOL_B 1 + +static int choose_best_symbol(struct symbol *syma, struct symbol *symb) +{ + s64 a; + s64 b; + + /* Prefer a symbol with non zero length */ + a = syma->end - syma->start; + b = symb->end - symb->start; + if ((b == 0) && (a > 0)) + return SYMBOL_A; + else if ((a == 0) && (b > 0)) + return SYMBOL_B; + + /* Prefer a non weak symbol over a weak one */ + a = syma->binding == STB_WEAK; + b = symb->binding == STB_WEAK; + if (b && !a) + return SYMBOL_A; + if (a && !b) + return SYMBOL_B; + + /* Prefer a global symbol over a non global one */ + a = syma->binding == STB_GLOBAL; + b = symb->binding == STB_GLOBAL; + if (a && !b) + return SYMBOL_A; + if (b && !a) + return SYMBOL_B; + + /* Prefer a symbol with less underscores */ + a = prefix_underscores_count(syma->name); + b = prefix_underscores_count(symb->name); + if (b > a) + return SYMBOL_A; + else if (a > b) + return SYMBOL_B; + + /* If all else fails, choose the symbol with the longest name */ + if (strlen(syma->name) >= strlen(symb->name)) + return SYMBOL_A; + else + return SYMBOL_B; +} + +static void symbols__fixup_duplicate(struct rb_root *symbols) +{ + struct rb_node *nd; + struct symbol *curr, *next; + + nd = rb_first(symbols); + + while (nd) { + curr = rb_entry(nd, struct symbol, rb_node); +again: + nd = rb_next(&curr->rb_node); + next = rb_entry(nd, struct symbol, rb_node); + + if (!nd) + break; + + if (curr->start != next->start) + continue; + + if (choose_best_symbol(curr, next) == SYMBOL_A) { + rb_erase(&next->rb_node, symbols); + goto again; + } else { + nd = rb_next(&curr->rb_node); + rb_erase(&curr->rb_node, symbols); + } + } +} + static void symbols__fixup_end(struct rb_root *symbols) { struct rb_node *nd, *prevnd = rb_first(symbols); @@ -438,18 +526,11 @@ int kallsyms__parse(const char *filename, void *arg, char *line = NULL; size_t n; int err = -1; - u64 prev_start = 0; - char prev_symbol_type = 0; - char *prev_symbol_name; FILE *file = fopen(filename, "r"); if (file == NULL) goto out_failure; - prev_symbol_name = malloc(KSYM_NAME_LEN); - if (prev_symbol_name == NULL) - goto out_close; - err = 0; while (!feof(file)) { @@ -470,7 +551,7 @@ int kallsyms__parse(const char *filename, void *arg, if (len + 2 >= line_len) continue; - symbol_type = toupper(line[len]); + symbol_type = line[len]; len += 2; symbol_name = line + len; len = line_len - len; @@ -480,24 +561,18 @@ int kallsyms__parse(const char *filename, void *arg, break; } - if (prev_symbol_type) { - u64 end = start; - if (end != prev_start) - --end; - err = process_symbol(arg, prev_symbol_name, - prev_symbol_type, prev_start, end); - if (err) - break; - } - - memcpy(prev_symbol_name, symbol_name, len + 1); - prev_symbol_type = symbol_type; - prev_start = start; + /* + * module symbols are not sorted so we add all + * symbols with zero length and rely on + * symbols__fixup_end() to fix it up. + */ + err = process_symbol(arg, symbol_name, + symbol_type, start, start); + if (err) + break; } - free(prev_symbol_name); free(line); -out_close: fclose(file); return err; @@ -703,6 +778,9 @@ int dso__load_kallsyms(struct dso *dso, const char *filename, if (dso__load_all_kallsyms(dso, filename, map) < 0) return -1; + symbols__fixup_duplicate(&dso->symbols[map->type]); + symbols__fixup_end(&dso->symbols[map->type]); + if (dso->kernel == DSO_TYPE_GUEST_KERNEL) dso->symtab_type = SYMTAB__GUEST_KALLSYMS; else @@ -1092,8 +1170,7 @@ static int dso__load_sym(struct dso *dso, struct map *map, const char *name, if (dso->has_build_id) { u8 build_id[BUILD_ID_SIZE]; - if (elf_read_build_id(elf, build_id, - BUILD_ID_SIZE) != BUILD_ID_SIZE) + if (elf_read_build_id(elf, build_id, BUILD_ID_SIZE) < 0) goto out_elf_end; if (!dso__build_id_equal(dso, build_id)) @@ -1111,6 +1188,8 @@ static int dso__load_sym(struct dso *dso, struct map *map, const char *name, } opdsec = elf_section_by_name(elf, &ehdr, &opdshdr, ".opd", &opdidx); + if (opdshdr.sh_type != SHT_PROGBITS) + opdsec = NULL; if (opdsec) opddata = elf_rawdata(opdsec, NULL); @@ -1276,6 +1355,7 @@ new_symbol: * For misannotated, zeroed, ASM function sizes. */ if (nr > 0) { + symbols__fixup_duplicate(&dso->symbols[map->type]); symbols__fixup_end(&dso->symbols[map->type]); if (kmap) { /* @@ -1362,8 +1442,8 @@ static int elf_read_build_id(Elf *elf, void *bf, size_t size) ptr = data->d_buf; while (ptr < (data->d_buf + data->d_size)) { GElf_Nhdr *nhdr = ptr; - int namesz = NOTE_ALIGN(nhdr->n_namesz), - descsz = NOTE_ALIGN(nhdr->n_descsz); + size_t namesz = NOTE_ALIGN(nhdr->n_namesz), + descsz = NOTE_ALIGN(nhdr->n_descsz); const char *name; ptr += sizeof(*nhdr); @@ -1372,8 +1452,10 @@ static int elf_read_build_id(Elf *elf, void *bf, size_t size) if (nhdr->n_type == NT_GNU_BUILD_ID && nhdr->n_namesz == sizeof("GNU")) { if (memcmp(name, "GNU", sizeof("GNU")) == 0) { - memcpy(bf, ptr, BUILD_ID_SIZE); - err = BUILD_ID_SIZE; + size_t sz = min(size, descsz); + memcpy(bf, ptr, sz); + memset(bf + sz, 0, size - sz); + err = descsz; break; } } @@ -1425,7 +1507,7 @@ int sysfs__read_build_id(const char *filename, void *build_id, size_t size) while (1) { char bf[BUFSIZ]; GElf_Nhdr nhdr; - int namesz, descsz; + size_t namesz, descsz; if (read(fd, &nhdr, sizeof(nhdr)) != sizeof(nhdr)) break; @@ -1434,15 +1516,16 @@ int sysfs__read_build_id(const char *filename, void *build_id, size_t size) descsz = NOTE_ALIGN(nhdr.n_descsz); if (nhdr.n_type == NT_GNU_BUILD_ID && nhdr.n_namesz == sizeof("GNU")) { - if (read(fd, bf, namesz) != namesz) + if (read(fd, bf, namesz) != (ssize_t)namesz) break; if (memcmp(bf, "GNU", sizeof("GNU")) == 0) { - if (read(fd, build_id, - BUILD_ID_SIZE) == BUILD_ID_SIZE) { + size_t sz = min(descsz, size); + if (read(fd, build_id, sz) == (ssize_t)sz) { + memset(build_id + sz, 0, size - sz); err = 0; break; } - } else if (read(fd, bf, descsz) != descsz) + } else if (read(fd, bf, descsz) != (ssize_t)descsz) break; } else { int n = namesz + descsz; diff --git a/tools/power/cpupower/Makefile b/tools/power/cpupower/Makefile index 94c2cf0a98b..e8a03aceceb 100644 --- a/tools/power/cpupower/Makefile +++ b/tools/power/cpupower/Makefile @@ -24,7 +24,7 @@ # Set the following to `true' to make a unstripped, unoptimized # binary. Leave this set to `false' for production use. -DEBUG ?= false +DEBUG ?= true # make the build silent. Set this to something else to make it noisy again. V ?= false @@ -35,7 +35,7 @@ NLS ?= true # Set the following to 'true' to build/install the # cpufreq-bench benchmarking tool -CPUFRQ_BENCH ?= true +CPUFREQ_BENCH ?= true # Prefix to the directories we're installing to DESTDIR ?= @@ -137,9 +137,10 @@ CFLAGS += -pipe ifeq ($(strip $(NLS)),true) INSTALL_NLS += install-gmo COMPILE_NLS += create-gmo + CFLAGS += -DNLS endif -ifeq ($(strip $(CPUFRQ_BENCH)),true) +ifeq ($(strip $(CPUFREQ_BENCH)),true) INSTALL_BENCH += install-bench COMPILE_BENCH += compile-bench endif diff --git a/tools/power/cpupower/debug/x86_64/Makefile b/tools/power/cpupower/debug/x86_64/Makefile index dbf13998462..3326217dd31 100644 --- a/tools/power/cpupower/debug/x86_64/Makefile +++ b/tools/power/cpupower/debug/x86_64/Makefile @@ -1,10 +1,10 @@ default: all -centrino-decode: centrino-decode.c - $(CC) $(CFLAGS) -o centrino-decode centrino-decode.c +centrino-decode: ../i386/centrino-decode.c + $(CC) $(CFLAGS) -o $@ $< -powernow-k8-decode: powernow-k8-decode.c - $(CC) $(CFLAGS) -o powernow-k8-decode powernow-k8-decode.c +powernow-k8-decode: ../i386/powernow-k8-decode.c + $(CC) $(CFLAGS) -o $@ $< all: centrino-decode powernow-k8-decode diff --git a/tools/power/cpupower/debug/x86_64/centrino-decode.c b/tools/power/cpupower/debug/x86_64/centrino-decode.c deleted file mode 120000 index 26fb3f1d8fc..00000000000 --- a/tools/power/cpupower/debug/x86_64/centrino-decode.c +++ /dev/null @@ -1 +0,0 @@ -../i386/centrino-decode.c
\ No newline at end of file diff --git a/tools/power/cpupower/debug/x86_64/powernow-k8-decode.c b/tools/power/cpupower/debug/x86_64/powernow-k8-decode.c deleted file mode 120000 index eb30c79cf9d..00000000000 --- a/tools/power/cpupower/debug/x86_64/powernow-k8-decode.c +++ /dev/null @@ -1 +0,0 @@ -../i386/powernow-k8-decode.c
\ No newline at end of file diff --git a/tools/power/cpupower/man/cpupower-frequency-info.1 b/tools/power/cpupower/man/cpupower-frequency-info.1 index 3194811d58f..bb60a8d1e45 100644 --- a/tools/power/cpupower/man/cpupower-frequency-info.1 +++ b/tools/power/cpupower/man/cpupower-frequency-info.1 @@ -1,10 +1,10 @@ -.TH "cpufreq-info" "1" "0.1" "Mattia Dongili" "" +.TH "cpupower-frequency-info" "1" "0.1" "Mattia Dongili" "" .SH "NAME" .LP -cpufreq\-info \- Utility to retrieve cpufreq kernel information +cpupower frequency\-info \- Utility to retrieve cpufreq kernel information .SH "SYNTAX" .LP -cpufreq\-info [\fIoptions\fP] +cpupower [ \-c cpulist ] frequency\-info [\fIoptions\fP] .SH "DESCRIPTION" .LP A small tool which prints out cpufreq information helpful to developers and interested users. diff --git a/tools/power/cpupower/man/cpupower-frequency-set.1 b/tools/power/cpupower/man/cpupower-frequency-set.1 index 26e3e13eee3..685f469093a 100644 --- a/tools/power/cpupower/man/cpupower-frequency-set.1 +++ b/tools/power/cpupower/man/cpupower-frequency-set.1 @@ -1,13 +1,13 @@ -.TH "cpufreq-set" "1" "0.1" "Mattia Dongili" "" +.TH "cpupower-freqency-set" "1" "0.1" "Mattia Dongili" "" .SH "NAME" .LP -cpufreq\-set \- A small tool which allows to modify cpufreq settings. +cpupower frequency\-set \- A small tool which allows to modify cpufreq settings. .SH "SYNTAX" .LP -cpufreq\-set [\fIoptions\fP] +cpupower [ \-c cpu ] frequency\-set [\fIoptions\fP] .SH "DESCRIPTION" .LP -cpufreq\-set allows you to modify cpufreq settings without having to type e.g. "/sys/devices/system/cpu/cpu0/cpufreq/scaling_set_speed" all the time. +cpupower frequency\-set allows you to modify cpufreq settings without having to type e.g. "/sys/devices/system/cpu/cpu0/cpufreq/scaling_set_speed" all the time. .SH "OPTIONS" .LP .TP diff --git a/tools/power/cpupower/man/cpupower.1 b/tools/power/cpupower/man/cpupower.1 index 78c20feab85..baf741d06e8 100644 --- a/tools/power/cpupower/man/cpupower.1 +++ b/tools/power/cpupower/man/cpupower.1 @@ -3,7 +3,7 @@ cpupower \- Shows and sets processor power related values .SH SYNOPSIS .ft B -.B cpupower [ \-c cpulist ] subcommand [ARGS] +.B cpupower [ \-c cpulist ] <command> [ARGS] .B cpupower \-v|\-\-version @@ -13,24 +13,24 @@ cpupower \- Shows and sets processor power related values \fBcpupower \fP is a collection of tools to examine and tune power saving related features of your processor. -The manpages of the subcommands (cpupower\-<subcommand>(1)) provide detailed +The manpages of the commands (cpupower\-<command>(1)) provide detailed descriptions of supported features. Run \fBcpupower help\fP to get an overview -of supported subcommands. +of supported commands. .SH Options .PP \-\-help, \-h .RS 4 -Shows supported subcommands and general usage. +Shows supported commands and general usage. .RE .PP \-\-cpu cpulist, \-c cpulist .RS 4 Only show or set values for specific cores. -This option is not supported by all subcommands, details can be found in the -manpages of the subcommands. +This option is not supported by all commands, details can be found in the +manpages of the commands. -Some subcommands access all cores (typically the *\-set commands), some only +Some commands access all cores (typically the *\-set commands), some only the first core (typically the *\-info commands) by default. The syntax for <cpulist> is based on how the kernel exports CPU bitmasks via diff --git a/tools/power/cpupower/utils/builtin.h b/tools/power/cpupower/utils/builtin.h index c870ffba521..c10496fbe3c 100644 --- a/tools/power/cpupower/utils/builtin.h +++ b/tools/power/cpupower/utils/builtin.h @@ -8,11 +8,4 @@ extern int cmd_freq_info(int argc, const char **argv); extern int cmd_idle_info(int argc, const char **argv); extern int cmd_monitor(int argc, const char **argv); -extern void set_help(void); -extern void info_help(void); -extern void freq_set_help(void); -extern void freq_info_help(void); -extern void idle_info_help(void); -extern void monitor_help(void); - #endif diff --git a/tools/power/cpupower/utils/cpufreq-info.c b/tools/power/cpupower/utils/cpufreq-info.c index 5a1d25f056b..28953c9a7bd 100644 --- a/tools/power/cpupower/utils/cpufreq-info.c +++ b/tools/power/cpupower/utils/cpufreq-info.c @@ -510,37 +510,6 @@ static int get_latency(unsigned int cpu, unsigned int human) return 0; } -void freq_info_help(void) -{ - printf(_("Usage: cpupower freqinfo [options]\n")); - printf(_("Options:\n")); - printf(_(" -e, --debug Prints out debug information [default]\n")); - printf(_(" -f, --freq Get frequency the CPU currently runs at, according\n" - " to the cpufreq core *\n")); - printf(_(" -w, --hwfreq Get frequency the CPU currently runs at, by reading\n" - " it from hardware (only available to root) *\n")); - printf(_(" -l, --hwlimits Determine the minimum and maximum CPU frequency allowed *\n")); - printf(_(" -d, --driver Determines the used cpufreq kernel driver *\n")); - printf(_(" -p, --policy Gets the currently used cpufreq policy *\n")); - printf(_(" -g, --governors Determines available cpufreq governors *\n")); - printf(_(" -r, --related-cpus Determines which CPUs run at the same hardware frequency *\n")); - printf(_(" -a, --affected-cpus Determines which CPUs need to have their frequency\n" - " coordinated by software *\n")); - printf(_(" -s, --stats Shows cpufreq statistics if available\n")); - printf(_(" -y, --latency Determines the maximum latency on CPU frequency changes *\n")); - printf(_(" -b, --boost Checks for turbo or boost modes *\n")); - printf(_(" -o, --proc Prints out information like provided by the /proc/cpufreq\n" - " interface in 2.4. and early 2.6. kernels\n")); - printf(_(" -m, --human human-readable output for the -f, -w, -s and -y parameters\n")); - printf(_(" -h, --help Prints out this screen\n")); - - printf("\n"); - printf(_("If no argument is given, full output about\n" - "cpufreq is printed which is useful e.g. for reporting bugs.\n\n")); - printf(_("By default info of CPU 0 is shown which can be overridden\n" - "with the cpupower --cpu main command option.\n")); -} - static struct option info_opts[] = { { .name = "debug", .has_arg = no_argument, .flag = NULL, .val = 'e'}, { .name = "boost", .has_arg = no_argument, .flag = NULL, .val = 'b'}, @@ -556,7 +525,6 @@ static struct option info_opts[] = { { .name = "latency", .has_arg = no_argument, .flag = NULL, .val = 'y'}, { .name = "proc", .has_arg = no_argument, .flag = NULL, .val = 'o'}, { .name = "human", .has_arg = no_argument, .flag = NULL, .val = 'm'}, - { .name = "help", .has_arg = no_argument, .flag = NULL, .val = 'h'}, { }, }; @@ -570,16 +538,12 @@ int cmd_freq_info(int argc, char **argv) int output_param = 0; do { - ret = getopt_long(argc, argv, "hoefwldpgrasmyb", info_opts, NULL); + ret = getopt_long(argc, argv, "oefwldpgrasmyb", info_opts, NULL); switch (ret) { case '?': output_param = '?'; cont = 0; break; - case 'h': - output_param = 'h'; - cont = 0; - break; case -1: cont = 0; break; @@ -642,11 +606,7 @@ int cmd_freq_info(int argc, char **argv) return -EINVAL; case '?': printf(_("invalid or unknown argument\n")); - freq_info_help(); return -EINVAL; - case 'h': - freq_info_help(); - return EXIT_SUCCESS; case 'o': proc_cpufreq_output(); return EXIT_SUCCESS; diff --git a/tools/power/cpupower/utils/cpufreq-set.c b/tools/power/cpupower/utils/cpufreq-set.c index 5f783622bf3..dd1539eb8c6 100644 --- a/tools/power/cpupower/utils/cpufreq-set.c +++ b/tools/power/cpupower/utils/cpufreq-set.c @@ -20,34 +20,11 @@ #define NORM_FREQ_LEN 32 -void freq_set_help(void) -{ - printf(_("Usage: cpupower frequency-set [options]\n")); - printf(_("Options:\n")); - printf(_(" -d FREQ, --min FREQ new minimum CPU frequency the governor may select\n")); - printf(_(" -u FREQ, --max FREQ new maximum CPU frequency the governor may select\n")); - printf(_(" -g GOV, --governor GOV new cpufreq governor\n")); - printf(_(" -f FREQ, --freq FREQ specific frequency to be set. Requires userspace\n" - " governor to be available and loaded\n")); - printf(_(" -r, --related Switches all hardware-related CPUs\n")); - printf(_(" -h, --help Prints out this screen\n")); - printf("\n"); - printf(_("Notes:\n" - "1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n")); - printf(_("2. The -f FREQ, --freq FREQ parameter cannot be combined with any other parameter\n" - " except the -c CPU, --cpu CPU parameter\n" - "3. FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz\n" - " by postfixing the value with the wanted unit name, without any space\n" - " (FREQuency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n")); - -} - static struct option set_opts[] = { { .name = "min", .has_arg = required_argument, .flag = NULL, .val = 'd'}, { .name = "max", .has_arg = required_argument, .flag = NULL, .val = 'u'}, { .name = "governor", .has_arg = required_argument, .flag = NULL, .val = 'g'}, { .name = "freq", .has_arg = required_argument, .flag = NULL, .val = 'f'}, - { .name = "help", .has_arg = no_argument, .flag = NULL, .val = 'h'}, { .name = "related", .has_arg = no_argument, .flag = NULL, .val='r'}, { }, }; @@ -80,7 +57,6 @@ const struct freq_units def_units[] = { static void print_unknown_arg(void) { printf(_("invalid or unknown argument\n")); - freq_set_help(); } static unsigned long string_to_frequency(const char *str) @@ -231,14 +207,11 @@ int cmd_freq_set(int argc, char **argv) /* parameter parsing */ do { - ret = getopt_long(argc, argv, "d:u:g:f:hr", set_opts, NULL); + ret = getopt_long(argc, argv, "d:u:g:f:r", set_opts, NULL); switch (ret) { case '?': print_unknown_arg(); return -EINVAL; - case 'h': - freq_set_help(); - return 0; case -1: cont = 0; break; diff --git a/tools/power/cpupower/utils/cpuidle-info.c b/tools/power/cpupower/utils/cpuidle-info.c index 70da3574f1e..b028267c137 100644 --- a/tools/power/cpupower/utils/cpuidle-info.c +++ b/tools/power/cpupower/utils/cpuidle-info.c @@ -139,30 +139,14 @@ static void proc_cpuidle_cpu_output(unsigned int cpu) } } -/* --freq / -f */ - -void idle_info_help(void) -{ - printf(_ ("Usage: cpupower idleinfo [options]\n")); - printf(_ ("Options:\n")); - printf(_ (" -s, --silent Only show general C-state information\n")); - printf(_ (" -o, --proc Prints out information like provided by the /proc/acpi/processor/*/power\n" - " interface in older kernels\n")); - printf(_ (" -h, --help Prints out this screen\n")); - - printf("\n"); -} - static struct option info_opts[] = { { .name = "silent", .has_arg = no_argument, .flag = NULL, .val = 's'}, { .name = "proc", .has_arg = no_argument, .flag = NULL, .val = 'o'}, - { .name = "help", .has_arg = no_argument, .flag = NULL, .val = 'h'}, { }, }; static inline void cpuidle_exit(int fail) { - idle_info_help(); exit(EXIT_FAILURE); } @@ -174,7 +158,7 @@ int cmd_idle_info(int argc, char **argv) unsigned int cpu = 0; do { - ret = getopt_long(argc, argv, "hos", info_opts, NULL); + ret = getopt_long(argc, argv, "os", info_opts, NULL); if (ret == -1) break; switch (ret) { @@ -182,10 +166,6 @@ int cmd_idle_info(int argc, char **argv) output_param = '?'; cont = 0; break; - case 'h': - output_param = 'h'; - cont = 0; - break; case 's': verbose = 0; break; @@ -211,8 +191,6 @@ int cmd_idle_info(int argc, char **argv) case '?': printf(_("invalid or unknown argument\n")); cpuidle_exit(EXIT_FAILURE); - case 'h': - cpuidle_exit(EXIT_SUCCESS); } /* Default is: show output of CPU 0 only */ diff --git a/tools/power/cpupower/utils/cpupower-info.c b/tools/power/cpupower/utils/cpupower-info.c index 85253cb7600..3f68632c28c 100644 --- a/tools/power/cpupower/utils/cpupower-info.c +++ b/tools/power/cpupower/utils/cpupower-info.c @@ -16,31 +16,16 @@ #include "helpers/helpers.h" #include "helpers/sysfs.h" -void info_help(void) -{ - printf(_("Usage: cpupower info [ -b ] [ -m ] [ -s ]\n")); - printf(_("Options:\n")); - printf(_(" -b, --perf-bias Gets CPU's power vs performance policy on some\n" - " Intel models [0-15], see manpage for details\n")); - printf(_(" -m, --sched-mc Gets the kernel's multi core scheduler policy.\n")); - printf(_(" -s, --sched-smt Gets the kernel's thread sibling scheduler policy.\n")); - printf(_(" -h, --help Prints out this screen\n")); - printf(_("\nPassing no option will show all info, by default only on core 0\n")); - printf("\n"); -} - static struct option set_opts[] = { { .name = "perf-bias", .has_arg = optional_argument, .flag = NULL, .val = 'b'}, { .name = "sched-mc", .has_arg = optional_argument, .flag = NULL, .val = 'm'}, { .name = "sched-smt", .has_arg = optional_argument, .flag = NULL, .val = 's'}, - { .name = "help", .has_arg = no_argument, .flag = NULL, .val = 'h'}, { }, }; static void print_wrong_arg_exit(void) { printf(_("invalid or unknown argument\n")); - info_help(); exit(EXIT_FAILURE); } @@ -64,11 +49,8 @@ int cmd_info(int argc, char **argv) textdomain(PACKAGE); /* parameter parsing */ - while ((ret = getopt_long(argc, argv, "msbh", set_opts, NULL)) != -1) { + while ((ret = getopt_long(argc, argv, "msb", set_opts, NULL)) != -1) { switch (ret) { - case 'h': - info_help(); - return 0; case 'b': if (params.perf_bias) print_wrong_arg_exit(); diff --git a/tools/power/cpupower/utils/cpupower-set.c b/tools/power/cpupower/utils/cpupower-set.c index bc1b391e46f..dc4de376211 100644 --- a/tools/power/cpupower/utils/cpupower-set.c +++ b/tools/power/cpupower/utils/cpupower-set.c @@ -17,30 +17,16 @@ #include "helpers/sysfs.h" #include "helpers/bitmask.h" -void set_help(void) -{ - printf(_("Usage: cpupower set [ -b val ] [ -m val ] [ -s val ]\n")); - printf(_("Options:\n")); - printf(_(" -b, --perf-bias [VAL] Sets CPU's power vs performance policy on some\n" - " Intel models [0-15], see manpage for details\n")); - printf(_(" -m, --sched-mc [VAL] Sets the kernel's multi core scheduler policy.\n")); - printf(_(" -s, --sched-smt [VAL] Sets the kernel's thread sibling scheduler policy.\n")); - printf(_(" -h, --help Prints out this screen\n")); - printf("\n"); -} - static struct option set_opts[] = { { .name = "perf-bias", .has_arg = optional_argument, .flag = NULL, .val = 'b'}, { .name = "sched-mc", .has_arg = optional_argument, .flag = NULL, .val = 'm'}, { .name = "sched-smt", .has_arg = optional_argument, .flag = NULL, .val = 's'}, - { .name = "help", .has_arg = no_argument, .flag = NULL, .val = 'h'}, { }, }; static void print_wrong_arg_exit(void) { printf(_("invalid or unknown argument\n")); - set_help(); exit(EXIT_FAILURE); } @@ -66,12 +52,9 @@ int cmd_set(int argc, char **argv) params.params = 0; /* parameter parsing */ - while ((ret = getopt_long(argc, argv, "m:s:b:h", + while ((ret = getopt_long(argc, argv, "m:s:b:", set_opts, NULL)) != -1) { switch (ret) { - case 'h': - set_help(); - return 0; case 'b': if (params.perf_bias) print_wrong_arg_exit(); @@ -110,10 +93,8 @@ int cmd_set(int argc, char **argv) } }; - if (!params.params) { - set_help(); - return -EINVAL; - } + if (!params.params) + print_wrong_arg_exit(); if (params.sched_mc) { ret = sysfs_set_sched("mc", sched_mc); diff --git a/tools/power/cpupower/utils/cpupower.c b/tools/power/cpupower/utils/cpupower.c index 5844ae0f786..52bee591c1c 100644 --- a/tools/power/cpupower/utils/cpupower.c +++ b/tools/power/cpupower/utils/cpupower.c @@ -11,6 +11,7 @@ #include <stdlib.h> #include <string.h> #include <unistd.h> +#include <errno.h> #include "builtin.h" #include "helpers/helpers.h" @@ -19,13 +20,12 @@ struct cmd_struct { const char *cmd; int (*main)(int, const char **); - void (*usage)(void); int needs_root; }; #define ARRAY_SIZE(x) (sizeof(x)/sizeof(x[0])) -int cmd_help(int argc, const char **argv); +static int cmd_help(int argc, const char **argv); /* Global cpu_info object available for all binaries * Info only retrieved from CPU 0 @@ -44,55 +44,66 @@ int be_verbose; static void print_help(void); static struct cmd_struct commands[] = { - { "frequency-info", cmd_freq_info, freq_info_help, 0 }, - { "frequency-set", cmd_freq_set, freq_set_help, 1 }, - { "idle-info", cmd_idle_info, idle_info_help, 0 }, - { "set", cmd_set, set_help, 1 }, - { "info", cmd_info, info_help, 0 }, - { "monitor", cmd_monitor, monitor_help, 0 }, - { "help", cmd_help, print_help, 0 }, - /* { "bench", cmd_bench, NULL, 1 }, */ + { "frequency-info", cmd_freq_info, 0 }, + { "frequency-set", cmd_freq_set, 1 }, + { "idle-info", cmd_idle_info, 0 }, + { "set", cmd_set, 1 }, + { "info", cmd_info, 0 }, + { "monitor", cmd_monitor, 0 }, + { "help", cmd_help, 0 }, + /* { "bench", cmd_bench, 1 }, */ }; -int cmd_help(int argc, const char **argv) -{ - unsigned int i; - - if (argc > 1) { - for (i = 0; i < ARRAY_SIZE(commands); i++) { - struct cmd_struct *p = commands + i; - if (strcmp(p->cmd, argv[1])) - continue; - if (p->usage) { - p->usage(); - return EXIT_SUCCESS; - } - } - } - print_help(); - if (argc == 1) - return EXIT_SUCCESS; /* cpupower help */ - return EXIT_FAILURE; -} - static void print_help(void) { unsigned int i; #ifdef DEBUG - printf(_("cpupower [ -d ][ -c cpulist ] subcommand [ARGS]\n")); - printf(_(" -d, --debug May increase output (stderr) on some subcommands\n")); + printf(_("Usage:\tcpupower [-d|--debug] [-c|--cpu cpulist ] <command> [<args>]\n")); #else - printf(_("cpupower [ -c cpulist ] subcommand [ARGS]\n")); + printf(_("Usage:\tcpupower [-c|--cpu cpulist ] <command> [<args>]\n")); #endif - printf(_("cpupower --version\n")); - printf(_("Supported subcommands are:\n")); + printf(_("Supported commands are:\n")); for (i = 0; i < ARRAY_SIZE(commands); i++) printf("\t%s\n", commands[i].cmd); - printf(_("\nSome subcommands can make use of the -c cpulist option.\n")); - printf(_("Look at the general cpupower manpage how to use it\n")); - printf(_("and read up the subcommand's manpage whether it is supported.\n")); - printf(_("\nUse cpupower help subcommand for getting help for above subcommands.\n")); + printf(_("\nNot all commands can make use of the -c cpulist option.\n")); + printf(_("\nUse 'cpupower help <command>' for getting help for above commands.\n")); +} + +static int print_man_page(const char *subpage) +{ + int len; + char *page; + + len = 10; /* enough for "cpupower-" */ + if (subpage != NULL) + len += strlen(subpage); + + page = malloc(len); + if (!page) + return -ENOMEM; + + sprintf(page, "cpupower"); + if ((subpage != NULL) && strcmp(subpage, "help")) { + strcat(page, "-"); + strcat(page, subpage); + } + + execlp("man", "man", page, NULL); + + /* should not be reached */ + return -EINVAL; +} + +static int cmd_help(int argc, const char **argv) +{ + if (argc > 1) { + print_man_page(argv[1]); /* exits within execlp() */ + return EXIT_FAILURE; + } + + print_help(); + return EXIT_SUCCESS; } static void print_version(void) diff --git a/tools/power/cpupower/utils/helpers/helpers.h b/tools/power/cpupower/utils/helpers/helpers.h index 592ee362b87..2747e738efb 100644 --- a/tools/power/cpupower/utils/helpers/helpers.h +++ b/tools/power/cpupower/utils/helpers/helpers.h @@ -16,11 +16,20 @@ #include "helpers/bitmask.h" /* Internationalization ****************************/ +#ifdef NLS + #define _(String) gettext(String) #ifndef gettext_noop #define gettext_noop(String) String #endif #define N_(String) gettext_noop(String) + +#else /* !NLS */ + +#define _(String) String +#define N_(String) String + +#endif /* Internationalization ****************************/ extern int run_as_root; @@ -96,6 +105,9 @@ struct cpupower_topology { int pkg; int core; int cpu; + + /* flags */ + unsigned int is_online:1; } *core_info; }; diff --git a/tools/power/cpupower/utils/helpers/sysfs.c b/tools/power/cpupower/utils/helpers/sysfs.c index 55e2466674c..c6343024a61 100644 --- a/tools/power/cpupower/utils/helpers/sysfs.c +++ b/tools/power/cpupower/utils/helpers/sysfs.c @@ -56,6 +56,56 @@ static unsigned int sysfs_write_file(const char *path, return (unsigned int) numwrite; } +/* + * Detect whether a CPU is online + * + * Returns: + * 1 -> if CPU is online + * 0 -> if CPU is offline + * negative errno values in error case + */ +int sysfs_is_cpu_online(unsigned int cpu) +{ + char path[SYSFS_PATH_MAX]; + int fd; + ssize_t numread; + unsigned long long value; + char linebuf[MAX_LINE_LEN]; + char *endp; + struct stat statbuf; + + snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u", cpu); + + if (stat(path, &statbuf) != 0) + return 0; + + /* + * kernel without CONFIG_HOTPLUG_CPU + * -> cpuX directory exists, but not cpuX/online file + */ + snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/online", cpu); + if (stat(path, &statbuf) != 0) + return 1; + + fd = open(path, O_RDONLY); + if (fd == -1) + return -errno; + + numread = read(fd, linebuf, MAX_LINE_LEN - 1); + if (numread < 1) { + close(fd); + return -EIO; + } + linebuf[numread] = '\0'; + close(fd); + + value = strtoull(linebuf, &endp, 0); + if (value > 1 || value < 0) + return -EINVAL; + + return value; +} + /* CPUidle idlestate specific /sys/devices/system/cpu/cpuX/cpuidle/ access */ /* diff --git a/tools/power/cpupower/utils/helpers/sysfs.h b/tools/power/cpupower/utils/helpers/sysfs.h index f9373e09063..8cb797bbceb 100644 --- a/tools/power/cpupower/utils/helpers/sysfs.h +++ b/tools/power/cpupower/utils/helpers/sysfs.h @@ -7,6 +7,8 @@ extern unsigned int sysfs_read_file(const char *path, char *buf, size_t buflen); +extern int sysfs_is_cpu_online(unsigned int cpu); + extern unsigned long sysfs_get_idlestate_latency(unsigned int cpu, unsigned int idlestate); extern unsigned long sysfs_get_idlestate_usage(unsigned int cpu, diff --git a/tools/power/cpupower/utils/helpers/topology.c b/tools/power/cpupower/utils/helpers/topology.c index 385ee5c7570..4eae2c47ba4 100644 --- a/tools/power/cpupower/utils/helpers/topology.c +++ b/tools/power/cpupower/utils/helpers/topology.c @@ -41,6 +41,8 @@ struct cpuid_core_info { unsigned int pkg; unsigned int thread; unsigned int cpu; + /* flags */ + unsigned int is_online:1; }; static int __compare(const void *t1, const void *t2) @@ -78,6 +80,8 @@ int get_cpu_topology(struct cpupower_topology *cpu_top) return -ENOMEM; cpu_top->pkgs = cpu_top->cores = 0; for (cpu = 0; cpu < cpus; cpu++) { + cpu_top->core_info[cpu].cpu = cpu; + cpu_top->core_info[cpu].is_online = sysfs_is_cpu_online(cpu); cpu_top->core_info[cpu].pkg = sysfs_topology_read_file(cpu, "physical_package_id"); if ((int)cpu_top->core_info[cpu].pkg != -1 && @@ -85,7 +89,6 @@ int get_cpu_topology(struct cpupower_topology *cpu_top) cpu_top->pkgs = cpu_top->core_info[cpu].pkg; cpu_top->core_info[cpu].core = sysfs_topology_read_file(cpu, "core_id"); - cpu_top->core_info[cpu].cpu = cpu; } cpu_top->pkgs++; diff --git a/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c b/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c index d048b96a615..bcd22a1a397 100644 --- a/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c +++ b/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c @@ -134,7 +134,7 @@ static struct cpuidle_monitor *cpuidle_register(void) /* Assume idle state count is the same for all CPUs */ cpuidle_sysfs_monitor.hw_states_num = sysfs_get_idlestate_count(0); - if (cpuidle_sysfs_monitor.hw_states_num == 0) + if (cpuidle_sysfs_monitor.hw_states_num <= 0) return NULL; for (num = 0; num < cpuidle_sysfs_monitor.hw_states_num; num++) { diff --git a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c index ba4bf068380..0d6571e418d 100644 --- a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c +++ b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c @@ -43,6 +43,12 @@ static struct cpupower_topology cpu_top; /* ToDo: Document this in the manpage */ static char range_abbr[RANGE_MAX] = { 'T', 'C', 'P', 'M', }; +static void print_wrong_arg_exit(void) +{ + printf(_("invalid or unknown argument\n")); + exit(EXIT_FAILURE); +} + long long timespec_diff_us(struct timespec start, struct timespec end) { struct timespec temp; @@ -56,21 +62,6 @@ long long timespec_diff_us(struct timespec start, struct timespec end) return (temp.tv_sec * 1000000) + (temp.tv_nsec / 1000); } -void monitor_help(void) -{ - printf(_("cpupower monitor: [-m <mon1>,[<mon2>],.. ] command\n")); - printf(_("cpupower monitor: [-m <mon1>,[<mon2>],.. ] [ -i interval_sec ]\n")); - printf(_("cpupower monitor: -l\n")); - printf(_("\t command: pass an arbitrary command to measure specific workload\n")); - printf(_("\t -i: time intervall to measure for in seconds (default 1)\n")); - printf(_("\t -l: list available CPU sleep monitors (for use with -m)\n")); - printf(_("\t -m: show specific CPU sleep monitors only (in same order)\n")); - printf(_("\t -h: print this help\n")); - printf("\n"); - printf(_("only one of: -l, -m are allowed\nIf none of them is passed,")); - printf(_(" all supported monitors are shown\n")); -} - void print_n_spaces(int n) { int x; @@ -149,6 +140,10 @@ void print_results(int topology_depth, int cpu) unsigned long long result; cstate_t s; + /* Be careful CPUs may got resorted for pkg value do not just use cpu */ + if (!bitmask_isbitset(cpus_chosen, cpu_top.core_info[cpu].cpu)) + return; + if (topology_depth > 2) printf("%4d|", cpu_top.core_info[cpu].pkg); if (topology_depth > 1) @@ -190,9 +185,13 @@ void print_results(int topology_depth, int cpu) } } } - /* cpu offline */ - if (cpu_top.core_info[cpu].pkg == -1 || - cpu_top.core_info[cpu].core == -1) { + /* + * The monitor could still provide useful data, for example + * AMD HW counters partly sit in PCI config space. + * It's up to the monitor plug-in to check .is_online, this one + * is just for additional info. + */ + if (!cpu_top.core_info[cpu].is_online) { printf(_(" *is offline\n")); return; } else @@ -238,7 +237,6 @@ static void parse_monitor_param(char *param) if (hits == 0) { printf(_("No matching monitor found in %s, " "try -l option\n"), param); - monitor_help(); exit(EXIT_FAILURE); } /* Override detected/registerd monitors array with requested one */ @@ -335,37 +333,27 @@ static void cmdline(int argc, char *argv[]) int opt; progname = basename(argv[0]); - while ((opt = getopt(argc, argv, "+hli:m:")) != -1) { + while ((opt = getopt(argc, argv, "+li:m:")) != -1) { switch (opt) { - case 'h': - monitor_help(); - exit(EXIT_SUCCESS); case 'l': - if (mode) { - monitor_help(); - exit(EXIT_FAILURE); - } + if (mode) + print_wrong_arg_exit(); mode = list; break; case 'i': /* only allow -i with -m or no option */ - if (mode && mode != show) { - monitor_help(); - exit(EXIT_FAILURE); - } + if (mode && mode != show) + print_wrong_arg_exit(); interval = atoi(optarg); break; case 'm': - if (mode) { - monitor_help(); - exit(EXIT_FAILURE); - } + if (mode) + print_wrong_arg_exit(); mode = show; show_monitors_param = optarg; break; default: - monitor_help(); - exit(EXIT_FAILURE); + print_wrong_arg_exit(); } } if (!mode) @@ -385,6 +373,10 @@ int cmd_monitor(int argc, char **argv) return EXIT_FAILURE; } + /* Default is: monitor all CPUs */ + if (bitmask_isallclear(cpus_chosen)) + bitmask_setall(cpus_chosen); + dprint("System has up to %d CPU cores\n", cpu_count); for (num = 0; all_monitors[num]; num++) { diff --git a/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c b/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c index 63ca87a05e5..5650ab5a2c2 100644 --- a/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c +++ b/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c @@ -22,12 +22,15 @@ #define MSR_TSC 0x10 +#define MSR_AMD_HWCR 0xc0010015 + enum mperf_id { C0 = 0, Cx, AVG_FREQ, MPERF_CSTATE_COUNT }; static int mperf_get_count_percent(unsigned int self_id, double *percent, unsigned int cpu); static int mperf_get_count_freq(unsigned int id, unsigned long long *count, unsigned int cpu); +static struct timespec time_start, time_end; static cstate_t mperf_cstates[MPERF_CSTATE_COUNT] = { { @@ -54,19 +57,33 @@ static cstate_t mperf_cstates[MPERF_CSTATE_COUNT] = { }, }; +enum MAX_FREQ_MODE { MAX_FREQ_SYSFS, MAX_FREQ_TSC_REF }; +static int max_freq_mode; +/* + * The max frequency mperf is ticking at (in C0), either retrieved via: + * 1) calculated after measurements if we know TSC ticks at mperf/P0 frequency + * 2) cpufreq /sys/devices/.../cpu0/cpufreq/cpuinfo_max_freq at init time + * 1. Is preferred as it also works without cpufreq subsystem (e.g. on Xen) + */ +static unsigned long max_frequency; + static unsigned long long tsc_at_measure_start; static unsigned long long tsc_at_measure_end; -static unsigned long max_frequency; static unsigned long long *mperf_previous_count; static unsigned long long *aperf_previous_count; static unsigned long long *mperf_current_count; static unsigned long long *aperf_current_count; + /* valid flag for all CPUs. If a MSR read failed it will be zero */ static int *is_valid; static int mperf_get_tsc(unsigned long long *tsc) { - return read_msr(0, MSR_TSC, tsc); + int ret; + ret = read_msr(0, MSR_TSC, tsc); + if (ret) + dprint("Reading TSC MSR failed, returning %llu\n", *tsc); + return ret; } static int mperf_init_stats(unsigned int cpu) @@ -97,36 +114,11 @@ static int mperf_measure_stats(unsigned int cpu) return 0; } -/* - * get_average_perf() - * - * Returns the average performance (also considers boosted frequencies) - * - * Input: - * aperf_diff: Difference of the aperf register over a time period - * mperf_diff: Difference of the mperf register over the same time period - * max_freq: Maximum frequency (P0) - * - * Returns: - * Average performance over the time period - */ -static unsigned long get_average_perf(unsigned long long aperf_diff, - unsigned long long mperf_diff) -{ - unsigned int perf_percent = 0; - if (((unsigned long)(-1) / 100) < aperf_diff) { - int shift_count = 7; - aperf_diff >>= shift_count; - mperf_diff >>= shift_count; - } - perf_percent = (aperf_diff * 100) / mperf_diff; - return (max_frequency * perf_percent) / 100; -} - static int mperf_get_count_percent(unsigned int id, double *percent, unsigned int cpu) { unsigned long long aperf_diff, mperf_diff, tsc_diff; + unsigned long long timediff; if (!is_valid[cpu]) return -1; @@ -136,11 +128,19 @@ static int mperf_get_count_percent(unsigned int id, double *percent, mperf_diff = mperf_current_count[cpu] - mperf_previous_count[cpu]; aperf_diff = aperf_current_count[cpu] - aperf_previous_count[cpu]; - tsc_diff = tsc_at_measure_end - tsc_at_measure_start; - *percent = 100.0 * mperf_diff / tsc_diff; - dprint("%s: mperf_diff: %llu, tsc_diff: %llu\n", - mperf_cstates[id].name, mperf_diff, tsc_diff); + if (max_freq_mode == MAX_FREQ_TSC_REF) { + tsc_diff = tsc_at_measure_end - tsc_at_measure_start; + *percent = 100.0 * mperf_diff / tsc_diff; + dprint("%s: TSC Ref - mperf_diff: %llu, tsc_diff: %llu\n", + mperf_cstates[id].name, mperf_diff, tsc_diff); + } else if (max_freq_mode == MAX_FREQ_SYSFS) { + timediff = timespec_diff_us(time_start, time_end); + *percent = 100.0 * mperf_diff / timediff; + dprint("%s: MAXFREQ - mperf_diff: %llu, time_diff: %llu\n", + mperf_cstates[id].name, mperf_diff, timediff); + } else + return -1; if (id == Cx) *percent = 100.0 - *percent; @@ -154,7 +154,7 @@ static int mperf_get_count_percent(unsigned int id, double *percent, static int mperf_get_count_freq(unsigned int id, unsigned long long *count, unsigned int cpu) { - unsigned long long aperf_diff, mperf_diff; + unsigned long long aperf_diff, mperf_diff, time_diff, tsc_diff; if (id != AVG_FREQ) return 1; @@ -165,11 +165,21 @@ static int mperf_get_count_freq(unsigned int id, unsigned long long *count, mperf_diff = mperf_current_count[cpu] - mperf_previous_count[cpu]; aperf_diff = aperf_current_count[cpu] - aperf_previous_count[cpu]; - /* Return MHz for now, might want to return KHz if column width is more - generic */ - *count = get_average_perf(aperf_diff, mperf_diff) / 1000; - dprint("%s: %llu\n", mperf_cstates[id].name, *count); + if (max_freq_mode == MAX_FREQ_TSC_REF) { + /* Calculate max_freq from TSC count */ + tsc_diff = tsc_at_measure_end - tsc_at_measure_start; + time_diff = timespec_diff_us(time_start, time_end); + max_frequency = tsc_diff / time_diff; + } + *count = max_frequency * ((double)aperf_diff / mperf_diff); + dprint("%s: Average freq based on %s maximum frequency:\n", + mperf_cstates[id].name, + (max_freq_mode == MAX_FREQ_TSC_REF) ? "TSC calculated" : "sysfs read"); + dprint("%max_frequency: %lu", max_frequency); + dprint("aperf_diff: %llu\n", aperf_diff); + dprint("mperf_diff: %llu\n", mperf_diff); + dprint("avg freq: %llu\n", *count); return 0; } @@ -178,6 +188,7 @@ static int mperf_start(void) int cpu; unsigned long long dbg; + clock_gettime(CLOCK_REALTIME, &time_start); mperf_get_tsc(&tsc_at_measure_start); for (cpu = 0; cpu < cpu_count; cpu++) @@ -193,32 +204,104 @@ static int mperf_stop(void) unsigned long long dbg; int cpu; - mperf_get_tsc(&tsc_at_measure_end); - for (cpu = 0; cpu < cpu_count; cpu++) mperf_measure_stats(cpu); + mperf_get_tsc(&tsc_at_measure_end); + clock_gettime(CLOCK_REALTIME, &time_end); + mperf_get_tsc(&dbg); dprint("TSC diff: %llu\n", dbg - tsc_at_measure_end); return 0; } -struct cpuidle_monitor mperf_monitor; - -struct cpuidle_monitor *mperf_register(void) +/* + * Mperf register is defined to tick at P0 (maximum) frequency + * + * Instead of reading out P0 which can be tricky to read out from HW, + * we use TSC counter if it reliably ticks at P0/mperf frequency. + * + * Still try to fall back to: + * /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq + * on older Intel HW without invariant TSC feature. + * Or on AMD machines where TSC does not tick at P0 (do not exist yet, but + * it's still double checked (MSR_AMD_HWCR)). + * + * On these machines the user would still get useful mperf + * stats when acpi-cpufreq driver is loaded. + */ +static int init_maxfreq_mode(void) { + int ret; + unsigned long long hwcr; unsigned long min; - if (!(cpupower_cpu_info.caps & CPUPOWER_CAP_APERF)) - return NULL; - - /* Assume min/max all the same on all cores */ + if (!cpupower_cpu_info.caps & CPUPOWER_CAP_INV_TSC) + goto use_sysfs; + + if (cpupower_cpu_info.vendor == X86_VENDOR_AMD) { + /* MSR_AMD_HWCR tells us whether TSC runs at P0/mperf + * freq. + * A test whether hwcr is accessable/available would be: + * (cpupower_cpu_info.family > 0x10 || + * cpupower_cpu_info.family == 0x10 && + * cpupower_cpu_info.model >= 0x2)) + * This should be the case for all aperf/mperf + * capable AMD machines and is therefore safe to test here. + * Compare with Linus kernel git commit: acf01734b1747b1ec4 + */ + ret = read_msr(0, MSR_AMD_HWCR, &hwcr); + /* + * If the MSR read failed, assume a Xen system that did + * not explicitly provide access to it and assume TSC works + */ + if (ret != 0) { + dprint("TSC read 0x%x failed - assume TSC working\n", + MSR_AMD_HWCR); + return 0; + } else if (1 & (hwcr >> 24)) { + max_freq_mode = MAX_FREQ_TSC_REF; + return 0; + } else { /* Use sysfs max frequency if available */ } + } else if (cpupower_cpu_info.vendor == X86_VENDOR_INTEL) { + /* + * On Intel we assume mperf (in C0) is ticking at same + * rate than TSC + */ + max_freq_mode = MAX_FREQ_TSC_REF; + return 0; + } +use_sysfs: if (cpufreq_get_hardware_limits(0, &min, &max_frequency)) { dprint("Cannot retrieve max freq from cpufreq kernel " "subsystem\n"); - return NULL; + return -1; } + max_freq_mode = MAX_FREQ_SYSFS; + return 0; +} + +/* + * This monitor provides: + * + * 1) Average frequency a CPU resided in + * This always works if the CPU has aperf/mperf capabilities + * + * 2) C0 and Cx (any sleep state) time a CPU resided in + * Works if mperf timer stops ticking in sleep states which + * seem to be the case on all current HW. + * Both is directly retrieved from HW registers and is independent + * from kernel statistics. + */ +struct cpuidle_monitor mperf_monitor; +struct cpuidle_monitor *mperf_register(void) +{ + if (!(cpupower_cpu_info.caps & CPUPOWER_CAP_APERF)) + return NULL; + + if (init_maxfreq_mode()) + return NULL; /* Free this at program termination */ is_valid = calloc(cpu_count, sizeof(int)); |