diff options
157 files changed, 6574 insertions, 1314 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9b2ef2fb3ca..c0d6bdae263 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -727,9 +727,11 @@ config ARCH_S5PC100 config ARCH_S5PV210 bool "Samsung S5PV210/S5PC110" select CPU_V7 + select ARCH_SPARSEMEM_ENABLE select GENERIC_GPIO select HAVE_CLK select ARM_L1_CACHE_SHIFT_6 + select ARCH_HAS_CPUFREQ select ARCH_USES_GETTIMEOFFSET select HAVE_S3C2410_I2C select HAVE_S3C_RTC @@ -740,9 +742,13 @@ config ARCH_S5PV210 config ARCH_S5PV310 bool "Samsung S5PV310/S5PC210" select CPU_V7 + select ARCH_SPARSEMEM_ENABLE select GENERIC_GPIO select HAVE_CLK select GENERIC_CLOCKEVENTS + select HAVE_S3C_RTC + select HAVE_S3C2410_I2C + select HAVE_S3C2410_WATCHDOG help Samsung S5PV310 series based systems diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index 6bcba48800f..351ca8d02aa 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -53,6 +53,10 @@ #define L2X0_LINE_DATA 0xF10 #define L2X0_LINE_TAG 0xF30 #define L2X0_DEBUG_CTRL 0xF40 +#define L2X0_PREFETCH_CTRL 0xF60 +#define L2X0_POWER_CTRL 0xF80 +#define L2X0_DYNAMIC_CLK_GATING_EN (1 << 1) +#define L2X0_STNDBY_MODE_EN (1 << 0) #ifndef __ASSEMBLY__ extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask); diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h index b649bf2ccd5..f7f6b07df30 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio.h @@ -22,6 +22,8 @@ #ifdef CONFIG_CPU_S3C244X #define ARCH_NR_GPIOS (32 * 9 + CONFIG_S3C24XX_GPIO_EXTRA) +#elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416) +#define ARCH_NR_GPIOS (32 * 12 + CONFIG_S3C24XX_GPIO_EXTRA) #else #define ARCH_NR_GPIOS (256 + CONFIG_S3C24XX_GPIO_EXTRA) #endif @@ -30,8 +32,10 @@ #include <mach/gpio-nrs.h> #include <mach/gpio-fns.h> -#ifdef CONFIG_CPU_S3C24XX -#define S3C_GPIO_END (S3C2410_GPIO_BANKJ + 32) +#ifdef CONFIG_CPU_S3C244X +#define S3C_GPIO_END (S3C2410_GPJ(0) + 32) +#elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416) +#define S3C_GPIO_END (S3C2410_GPM(0) + 32) #else -#define S3C_GPIO_END (S3C2410_GPIO_BANKH + 32) +#define S3C_GPIO_END (S3C2410_GPH(0) + 32) #endif diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h index 08ab9dfb6ae..101aeea2231 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h @@ -118,6 +118,8 @@ #define S3C2443_SCLKCON_UARTCLK (1<<8) #define S3C2443_SCLKCON_USBHOST (1<<1) +#define S3C2443_PWRCFG_SLEEP (1<<15) + #include <asm/div64.h> static inline unsigned int diff --git a/arch/arm/mach-s3c2410/include/mach/vmalloc.h b/arch/arm/mach-s3c2410/include/mach/vmalloc.h index 54297eb0bf5..7a311e8dddb 100644 --- a/arch/arm/mach-s3c2410/include/mach/vmalloc.h +++ b/arch/arm/mach-s3c2410/include/mach/vmalloc.h @@ -15,6 +15,6 @@ #ifndef __ASM_ARCH_VMALLOC_H #define __ASM_ARCH_VMALLOC_H -#define VMALLOC_END 0xE0000000UL +#define VMALLOC_END 0xF6000000UL #endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c index bef39f77729..4c6df51ddf3 100644 --- a/arch/arm/mach-s3c2412/s3c2412.c +++ b/arch/arm/mach-s3c2412/s3c2412.c @@ -51,6 +51,7 @@ #include <plat/clock.h> #include <plat/pm.h> #include <plat/pll.h> +#include <plat/nand-core.h> #ifndef CONFIG_CPU_S3C2412_ONLY void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO; @@ -92,7 +93,7 @@ void __init s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no) /* rename devices that are s3c2412/s3c2413 specific */ s3c_device_sdi.name = "s3c2412-sdi"; s3c_device_lcd.name = "s3c2412-lcd"; - s3c_device_nand.name = "s3c2412-nand"; + s3c_nand_setname("s3c2412-nand"); /* alter IRQ of SDI controller */ diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig index 657e4fe17f3..87b9c9f003b 100644 --- a/arch/arm/mach-s3c2416/Kconfig +++ b/arch/arm/mach-s3c2416/Kconfig @@ -25,6 +25,11 @@ config S3C2416_DMA help Internal config node for S3C2416 DMA support +config S3C2416_PM + bool + help + Internal config node to apply S3C2416 power management + menu "S3C2416 Machines" config MACH_SMDK2416 @@ -33,6 +38,7 @@ config MACH_SMDK2416 select S3C_DEV_FB select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 + select S3C2416_PM if PM help Say Y here if you are using an SMDK2416 diff --git a/arch/arm/mach-s3c2416/Makefile b/arch/arm/mach-s3c2416/Makefile index 6c12c7bf40a..ef038d62ffd 100644 --- a/arch/arm/mach-s3c2416/Makefile +++ b/arch/arm/mach-s3c2416/Makefile @@ -11,7 +11,7 @@ obj- := obj-$(CONFIG_CPU_S3C2416) += s3c2416.o clock.o obj-$(CONFIG_CPU_S3C2416) += irq.o - +obj-$(CONFIG_S3C2416_PM) += pm.o #obj-$(CONFIG_S3C2416_DMA) += dma.o # Machine support diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c2416/irq.c index 89f521d59d0..084d121f368 100644 --- a/arch/arm/mach-s3c2416/irq.c +++ b/arch/arm/mach-s3c2416/irq.c @@ -243,6 +243,8 @@ static int __init s3c2416_irq_add(struct sys_device *sysdev) static struct sysdev_driver s3c2416_irq_driver = { .add = s3c2416_irq_add, + .suspend = s3c24xx_irq_suspend, + .resume = s3c24xx_irq_resume, }; static int __init s3c2416_irq_init(void) diff --git a/arch/arm/mach-s3c2416/pm.c b/arch/arm/mach-s3c2416/pm.c new file mode 100644 index 00000000000..4a04205b04d --- /dev/null +++ b/arch/arm/mach-s3c2416/pm.c @@ -0,0 +1,84 @@ +/* linux/arch/arm/mach-s3c2416/pm.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S3C2416 - PM support (Based on Ben Dooks' S3C2412 PM support) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/sysdev.h> +#include <linux/io.h> + +#include <asm/cacheflush.h> + +#include <mach/regs-power.h> +#include <mach/regs-s3c2443-clock.h> + +#include <plat/cpu.h> +#include <plat/pm.h> + +extern void s3c2412_sleep_enter(void); + +static void s3c2416_cpu_suspend(void) +{ + flush_cache_all(); + + /* enable wakeup sources regardless of battery state */ + __raw_writel(S3C2443_PWRCFG_SLEEP, S3C2443_PWRCFG); + + /* set the mode as sleep, 2BED represents "Go to BED" */ + __raw_writel(0x2BED, S3C2443_PWRMODE); + + s3c2412_sleep_enter(); +} + +static void s3c2416_pm_prepare(void) +{ + /* + * write the magic value u-boot uses to check for resume into + * the INFORM0 register, and ensure INFORM1 is set to the + * correct address to resume from. + */ + __raw_writel(0x2BED, S3C2412_INFORM0); + __raw_writel(virt_to_phys(s3c_cpu_resume), S3C2412_INFORM1); +} + +static int s3c2416_pm_add(struct sys_device *sysdev) +{ + pm_cpu_prep = s3c2416_pm_prepare; + pm_cpu_sleep = s3c2416_cpu_suspend; + + return 0; +} + +static int s3c2416_pm_suspend(struct sys_device *dev, pm_message_t state) +{ + return 0; +} + +static int s3c2416_pm_resume(struct sys_device *dev) +{ + /* unset the return-from-sleep amd inform flags */ + __raw_writel(0x0, S3C2443_PWRMODE); + __raw_writel(0x0, S3C2412_INFORM0); + __raw_writel(0x0, S3C2412_INFORM1); + + return 0; +} + +static struct sysdev_driver s3c2416_pm_driver = { + .add = s3c2416_pm_add, + .suspend = s3c2416_pm_suspend, + .resume = s3c2416_pm_resume, +}; + +static __init int s3c2416_pm_init(void) +{ + return sysdev_driver_register(&s3c2416_sysclass, &s3c2416_pm_driver); +} + +arch_initcall(s3c2416_pm_init); diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c index bc30245e133..63f39cdc097 100644 --- a/arch/arm/mach-s3c2416/s3c2416.c +++ b/arch/arm/mach-s3c2416/s3c2416.c @@ -56,6 +56,7 @@ #include <plat/iic-core.h> #include <plat/fb-core.h> +#include <plat/nand-core.h> static struct map_desc s3c2416_iodesc[] __initdata = { IODESC_ENT(WATCHDOG), @@ -100,7 +101,7 @@ void __init s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no) { s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no); - s3c_device_nand.name = "s3c2416-nand"; + s3c_nand_setname("s3c2412-nand"); } /* s3c2416_map_io diff --git a/arch/arm/mach-s3c2440/s3c244x.c b/arch/arm/mach-s3c2440/s3c244x.c index 5e4a97e7653..90c1707b9c9 100644 --- a/arch/arm/mach-s3c2440/s3c244x.c +++ b/arch/arm/mach-s3c2440/s3c244x.c @@ -44,6 +44,7 @@ #include <plat/cpu.h> #include <plat/pm.h> #include <plat/pll.h> +#include <plat/nand-core.h> static struct map_desc s3c244x_iodesc[] __initdata = { IODESC_ENT(CLKPWR), @@ -68,7 +69,7 @@ void __init s3c244x_map_io(void) s3c_device_sdi.name = "s3c2440-sdi"; s3c_device_i2c0.name = "s3c2440-i2c"; - s3c_device_nand.name = "s3c2440-nand"; + s3c_nand_setname("s3c2440-nand"); s3c_device_ts.name = "s3c2440-ts"; s3c_device_usbgadget.name = "s3c2440-usbgadget"; } diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c index 839b6b2ced7..33d18dd1ebd 100644 --- a/arch/arm/mach-s3c2443/s3c2443.c +++ b/arch/arm/mach-s3c2443/s3c2443.c @@ -36,6 +36,7 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <plat/fb-core.h> +#include <plat/nand-core.h> static struct map_desc s3c2443_iodesc[] __initdata = { IODESC_ENT(WATCHDOG), @@ -62,7 +63,7 @@ int __init s3c2443_init(void) s3c24xx_reset_hook = s3c2443_hard_reset; - s3c_device_nand.name = "s3c2412-nand"; + s3c_nand_setname("s3c2412-nand"); s3c_fb_setname("s3c2443-fb"); /* change WDT IRQ number */ diff --git a/arch/arm/mach-s3c24a0/include/mach/vmalloc.h b/arch/arm/mach-s3c24a0/include/mach/vmalloc.h index 91465682079..6480b15277f 100644 --- a/arch/arm/mach-s3c24a0/include/mach/vmalloc.h +++ b/arch/arm/mach-s3c24a0/include/mach/vmalloc.h @@ -12,6 +12,6 @@ #ifndef __ASM_ARCH_VMALLOC_H #define __ASM_ARCH_VMALLOC_H -#define VMALLOC_END (0xe0000000UL) +#define VMALLOC_END 0xF6000000UL #endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 1e4d78af7d8..fe1fd3007ae 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -98,12 +98,33 @@ config MACH_ANW6410 help Machine support for the A&W6410 +config MACH_MINI6410 + bool "MINI6410" + select CPU_S3C6410 + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C64XX_SETUP_SDHCI + select S3C_DEV_USB_HOST + select S3C_DEV_NAND + select S3C_DEV_FB + select S3C64XX_SETUP_FB_24BPP + select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_TS + help + Machine support for the FriendlyARM MINI6410 + config MACH_REAL6410 bool "REAL6410" select CPU_S3C6410 select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C64XX_SETUP_SDHCI + select S3C_DEV_FB + select S3C64XX_SETUP_FB_24BPP + select S3C_DEV_NAND + select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_TS + select S3C_DEV_USB_HOST help Machine support for the CoreWind REAL6410 diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile index 90221a2e0c5..4657363f067 100644 --- a/arch/arm/mach-s3c64xx/Makefile +++ b/arch/arm/mach-s3c64xx/Makefile @@ -53,6 +53,7 @@ obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o obj-$(CONFIG_MACH_REAL6410) += mach-real6410.o +obj-$(CONFIG_MACH_MINI6410) += mach-mini6410.o obj-$(CONFIG_MACH_NCP) += mach-ncp.o obj-$(CONFIG_MACH_HMT) += mach-hmt.o obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c index 3838335f125..76426a32c01 100644 --- a/arch/arm/mach-s3c64xx/dev-audio.c +++ b/arch/arm/mach-s3c64xx/dev-audio.c @@ -22,27 +22,16 @@ #include <plat/audio.h> #include <plat/gpio-cfg.h> -#include <mach/gpio-bank-c.h> -#include <mach/gpio-bank-d.h> -#include <mach/gpio-bank-e.h> -#include <mach/gpio-bank-h.h> - static int s3c64xx_i2sv3_cfg_gpio(struct platform_device *pdev) { + unsigned int base; + switch (pdev->id) { case 0: - s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_I2S0_CLK); - s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_I2S0_CDCLK); - s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_I2S0_LRCLK); - s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_I2S0_DI); - s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_I2S0_D0); + base = S3C64XX_GPD(0); break; case 1: - s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_I2S1_CLK); - s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_I2S1_CDCLK); - s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_I2S1_LRCLK); - s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_I2S1_DI); - s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_I2S1_D0); + base = S3C64XX_GPE(0); break; default: printk(KERN_DEBUG "Invalid I2S Controller number: %d\n", @@ -50,18 +39,17 @@ static int s3c64xx_i2sv3_cfg_gpio(struct platform_device *pdev) return -EINVAL; } + s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(3)); + return 0; } static int s3c64xx_i2sv4_cfg_gpio(struct platform_device *pdev) { - s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C64XX_GPC4_I2S_V40_DO0); - s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C64XX_GPC5_I2S_V40_DO1); - s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C64XX_GPC7_I2S_V40_DO2); - s3c_gpio_cfgpin(S3C64XX_GPH(6), S3C64XX_GPH6_I2S_V40_BCLK); - s3c_gpio_cfgpin(S3C64XX_GPH(7), S3C64XX_GPH7_I2S_V40_CDCLK); - s3c_gpio_cfgpin(S3C64XX_GPH(8), S3C64XX_GPH8_I2S_V40_LRCLK); - s3c_gpio_cfgpin(S3C64XX_GPH(9), S3C64XX_GPH9_I2S_V40_DI); + s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin_range(S3C64XX_GPH(6), 4, S3C_GPIO_SFN(5)); return 0; } @@ -170,20 +158,14 @@ EXPORT_SYMBOL(s3c64xx_device_iisv4); static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev) { + unsigned int base; + switch (pdev->id) { case 0: - s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_PCM0_SCLK); - s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_PCM0_EXTCLK); - s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_PCM0_FSYNC); - s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_PCM0_SIN); - s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_PCM0_SOUT); + base = S3C64XX_GPD(0); break; case 1: - s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_PCM1_SCLK); - s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_PCM1_EXTCLK); - s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_PCM1_FSYNC); - s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_PCM1_SIN); - s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_PCM1_SOUT); + base = S3C64XX_GPE(0); break; default: printk(KERN_DEBUG "Invalid PCM Controller number: %d\n", @@ -191,6 +173,7 @@ static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev) return -EINVAL; } + s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(2)); return 0; } @@ -264,24 +247,12 @@ EXPORT_SYMBOL(s3c64xx_device_pcm1); static int s3c64xx_ac97_cfg_gpd(struct platform_device *pdev) { - s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_AC97_BITCLK); - s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_AC97_nRESET); - s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_AC97_SYNC); - s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_AC97_SDI); - s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_AC97_SDO); - - return 0; + return s3c_gpio_cfgpin_range(S3C64XX_GPD(0), 5, S3C_GPIO_SFN(4)); } static int s3c64xx_ac97_cfg_gpe(struct platform_device *pdev) { - s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_AC97_BITCLK); - s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_AC97_nRESET); - s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_AC97_SYNC); - s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_AC97_SDI); - s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_AC97_SDO); - - return 0; + return s3c_gpio_cfgpin_range(S3C64XX_GPE(0), 5, S3C_GPIO_SFN(4)); } static struct resource s3c64xx_ac97_resource[] = { diff --git a/arch/arm/mach-s3c64xx/gpiolib.c b/arch/arm/mach-s3c64xx/gpiolib.c index 300dee4a667..fd99a82e82c 100644 --- a/arch/arm/mach-s3c64xx/gpiolib.c +++ b/arch/arm/mach-s3c64xx/gpiolib.c @@ -195,11 +195,6 @@ static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = { .get_pull = s3c_gpio_getpull_updown, }; -int s3c64xx_gpio2int_gpn(struct gpio_chip *chip, unsigned pin) -{ - return IRQ_EINT(0) + pin; -} - static struct s3c_gpio_chip gpio_2bit[] = { { .base = S3C64XX_GPF_BASE, @@ -227,12 +222,13 @@ static struct s3c_gpio_chip gpio_2bit[] = { }, }, { .base = S3C64XX_GPN_BASE, + .irq_base = IRQ_EINT(0), .config = &gpio_2bit_cfg_eint10, .chip = { .base = S3C64XX_GPN(0), .ngpio = S3C64XX_GPIO_N_NR, .label = "GPN", - .to_irq = s3c64xx_gpio2int_gpn, + .to_irq = samsung_gpiolib_to_irq, }, }, { .base = S3C64XX_GPO_BASE, diff --git a/arch/arm/mach-s3c64xx/include/mach/vmalloc.h b/arch/arm/mach-s3c64xx/include/mach/vmalloc.h index bc0e9138986..23f75e556a3 100644 --- a/arch/arm/mach-s3c64xx/include/mach/vmalloc.h +++ b/arch/arm/mach-s3c64xx/include/mach/vmalloc.h @@ -15,6 +15,6 @@ #ifndef __ASM_ARCH_VMALLOC_H #define __ASM_ARCH_VMALLOC_H -#define VMALLOC_END 0xE0000000UL +#define VMALLOC_END 0xF6000000UL #endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c new file mode 100644 index 00000000000..249c6295647 --- /dev/null +++ b/arch/arm/mach-s3c64xx/mach-mini6410.c @@ -0,0 +1,357 @@ +/* linux/arch/arm/mach-s3c64xx/mach-mini6410.c + * + * Copyright 2010 Darius Augulis <augulis.darius@gmail.com> + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/fb.h> +#include <linux/gpio.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/dm9000.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/serial_core.h> +#include <linux/types.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <mach/map.h> +#include <mach/regs-fb.h> +#include <mach/regs-gpio.h> +#include <mach/regs-modem.h> +#include <mach/regs-srom.h> +#include <mach/s3c6410.h> + +#include <plat/adc.h> +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/fb.h> +#include <plat/nand.h> +#include <plat/regs-serial.h> +#include <plat/ts.h> + +#include <video/platform_lcd.h> + +#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK) +#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB) +#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) + +static struct s3c2410_uartcfg mini6410_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, +}; + +/* DM9000AEP 10/100 ethernet controller */ + +static struct resource mini6410_dm9k_resource[] = { + [0] = { + .start = S3C64XX_PA_XM0CSN1, + .end = S3C64XX_PA_XM0CSN1 + 1, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = S3C64XX_PA_XM0CSN1 + 4, + .end = S3C64XX_PA_XM0CSN1 + 5, + .flags = IORESOURCE_MEM + }, + [2] = { + .start = S3C_EINT(7), + .end = S3C_EINT(7), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL + } +}; + +static struct dm9000_plat_data mini6410_dm9k_pdata = { + .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM), +}; + +static struct platform_device mini6410_device_eth = { + .name = "dm9000", + .id = -1, + .num_resources = ARRAY_SIZE(mini6410_dm9k_resource), + .resource = mini6410_dm9k_resource, + .dev = { + .platform_data = &mini6410_dm9k_pdata, + }, +}; + +static struct mtd_partition mini6410_nand_part[] = { + [0] = { + .name = "uboot", + .size = SZ_1M, + .offset = 0, + }, + [1] = { + .name = "kernel", + .size = SZ_2M, + .offset = SZ_1M, + }, + [2] = { + .name = "rootfs", + .size = MTDPART_SIZ_FULL, + .offset = SZ_1M + SZ_2M, + }, +}; + +static struct s3c2410_nand_set mini6410_nand_sets[] = { + [0] = { + .name = "nand", + .nr_chips = 1, + .nr_partitions = ARRAY_SIZE(mini6410_nand_part), + .partitions = mini6410_nand_part, + }, +}; + +static struct s3c2410_platform_nand mini6410_nand_info = { + .tacls = 25, + .twrph0 = 55, + .twrph1 = 40, + .nr_sets = ARRAY_SIZE(mini6410_nand_sets), + .sets = mini6410_nand_sets, +}; + +static struct s3c_fb_pd_win mini6410_fb_win[] = { + { + .win_mode = { /* 4.3" 480x272 */ + .left_margin = 3, + .right_margin = 2, + .upper_margin = 1, + .lower_margin = 1, + .hsync_len = 40, + .vsync_len = 1, + .xres = 480, + .yres = 272, + }, + .max_bpp = 32, + .default_bpp = 16, + }, { + .win_mode = { /* 7.0" 800x480 */ + .left_margin = 8, + .right_margin = 13, + .upper_margin = 7, + .lower_margin = 5, + .hsync_len = 3, + .vsync_len = 1, + .xres = 800, + .yres = 480, + }, + .max_bpp = 32, + .default_bpp = 16, + }, +}; + +static struct s3c_fb_platdata mini6410_lcd_pdata __initdata = { + .setup_gpio = s3c64xx_fb_gpio_setup_24bpp, + .win[0] = &mini6410_fb_win[0], + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, +}; + +static void mini6410_lcd_power_set(struct plat_lcd_data *pd, + unsigned int power) +{ + if (power) + gpio_direction_output(S3C64XX_GPE(0), 1); + else + gpio_direction_output(S3C64XX_GPE(0), 0); +} + +static struct plat_lcd_data mini6410_lcd_power_data = { + .set_power = mini6410_lcd_power_set, +}; + +static struct platform_device mini6410_lcd_powerdev = { + .name = "platform-lcd", + .dev.parent = &s3c_device_fb.dev, + .dev.platform_data = &mini6410_lcd_power_data, +}; + +static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { + .delay = 10000, + .presc = 49, + .oversampling_shift = 2, +}; + +static struct platform_device *mini6410_devices[] __initdata = { + &mini6410_device_eth, + &s3c_device_hsmmc0, + &s3c_device_hsmmc1, + &s3c_device_ohci, + &s3c_device_nand, + &s3c_device_fb, + &mini6410_lcd_powerdev, + &s3c_device_adc, + &s3c_device_ts, +}; + +static void __init mini6410_map_io(void) +{ + u32 tmp; + + s3c64xx_init_io(NULL, 0); + s3c24xx_init_clocks(12000000); + s3c24xx_init_uarts(mini6410_uartcfgs, ARRAY_SIZE(mini6410_uartcfgs)); + + /* set the LCD type */ + tmp = __raw_readl(S3C64XX_SPCON); + tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK; + tmp |= S3C64XX_SPCON_LCD_SEL_RGB; + __raw_writel(tmp, S3C64XX_SPCON); + + /* remove the LCD bypass */ + tmp = __raw_readl(S3C64XX_MODEM_MIFPCON); + tmp &= ~MIFPCON_LCD_BYPASS; + __raw_writel(tmp, S3C64XX_MODEM_MIFPCON); +} + +/* + * mini6410_features string + * + * 0-9 LCD configuration + * + */ +static char mini6410_features_str[12] __initdata = "0"; + +static int __init mini6410_features_setup(char *str) +{ + if (str) + strlcpy(mini6410_features_str, str, + sizeof(mini6410_features_str)); + return 1; +} + +__setup("mini6410=", mini6410_features_setup); + +#define FEATURE_SCREEN (1 << 0) + +struct mini6410_features_t { + int done; + int lcd_index; +}; + +static void mini6410_parse_features( + struct mini6410_features_t *features, + const char *features_str) +{ + const char *fp = features_str; + + features->done = 0; + features->lcd_index = 0; + + while (*fp) { + char f = *fp++; + + switch (f) { + case '0'...'9': /* tft screen */ + if (features->done & FEATURE_SCREEN) { + printk(KERN_INFO "MINI6410: '%c' ignored, " + "screen type already set\n", f); + } else { + int li = f - '0'; + if (li >= ARRAY_SIZE(mini6410_fb_win)) + printk(KERN_INFO "MINI6410: '%c' out " + "of range LCD mode\n", f); + else { + features->lcd_index = li; + } + } + features->done |= FEATURE_SCREEN; + break; + } + } +} + +static void __init mini6410_machine_init(void) +{ + u32 cs1; + struct mini6410_features_t features = { 0 }; + + printk(KERN_INFO "MINI6410: Option string mini6410=%s\n", + mini6410_features_str); + + /* Parse the feature string */ + mini6410_parse_features(&features, mini6410_features_str); + + mini6410_lcd_pdata.win[0] = &mini6410_fb_win[features.lcd_index]; + + printk(KERN_INFO "MINI6410: selected LCD display is %dx%d\n", + mini6410_lcd_pdata.win[0]->win_mode.xres, + mini6410_lcd_pdata.win[0]->win_mode.yres); + + s3c_nand_set_platdata(&mini6410_nand_info); + s3c_fb_set_platdata(&mini6410_lcd_pdata); + s3c24xx_ts_set_platdata(&s3c_ts_platform); + + /* configure nCS1 width to 16 bits */ + + cs1 = __raw_readl(S3C64XX_SROM_BW) & + ~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT); + cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) | + (1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) | + (1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) << + S3C64XX_SROM_BW__NCS1__SHIFT; + __raw_writel(cs1, S3C64XX_SROM_BW); + + /* set timing for nCS1 suitable for ethernet chip */ + + __raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) | + (6 << S3C64XX_SROM_BCX__TACP__SHIFT) | + (4 << S3C64XX_SROM_BCX__TCAH__SHIFT) | + (1 << S3C64XX_SROM_BCX__TCOH__SHIFT) | + (13 << S3C64XX_SROM_BCX__TACC__SHIFT) | + (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) | + (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1); + + gpio_request(S3C64XX_GPF(15), "LCD power"); + gpio_request(S3C64XX_GPE(0), "LCD power"); + + platform_add_devices(mini6410_devices, ARRAY_SIZE(mini6410_devices)); +} + +MACHINE_START(MINI6410, "MINI6410") + /* Maintainer: Darius Augulis <augulis.darius@gmail.com> */ + .boot_params = S3C64XX_PA_SDRAM + 0x100, + .init_irq = s3c6410_init_irq, + .map_io = mini6410_map_io, + .init_machine = mini6410_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c index 4b4475da8ec..f9ef9b5c5f5 100644 --- a/arch/arm/mach-s3c64xx/mach-real6410.c +++ b/arch/arm/mach-s3c64xx/mach-real6410.c @@ -12,23 +12,39 @@ * */ -#include <linux/kernel.h> -#include <linux/types.h> +#include <linux/init.h> #include <linux/interrupt.h> +#include <linux/fb.h> +#include <linux/gpio.h> +#include <linux/kernel.h> #include <linux/list.h> -#include <linux/init.h> #include <linux/dm9000.h> -#include <linux/serial_core.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> #include <linux/platform_device.h> +#include <linux/serial_core.h> +#include <linux/types.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> + #include <mach/map.h> -#include <mach/s3c6410.h> +#include <mach/regs-fb.h> +#include <mach/regs-gpio.h> +#include <mach/regs-modem.h> #include <mach/regs-srom.h> +#include <mach/s3c6410.h> + +#include <plat/adc.h> #include <plat/cpu.h> #include <plat/devs.h> +#include <plat/fb.h> +#include <plat/nand.h> #include <plat/regs-serial.h> +#include <plat/ts.h> + +#include <video/platform_lcd.h> #define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK) #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB) @@ -99,22 +115,192 @@ static struct platform_device real6410_device_eth = { }, }; +static struct s3c_fb_pd_win real6410_fb_win[] = { + { + .win_mode = { /* 4.3" 480x272 */ + .left_margin = 3, + .right_margin = 2, + .upper_margin = 1, + .lower_margin = 1, + .hsync_len = 40, + .vsync_len = 1, + .xres = 480, + .yres = 272, + }, + .max_bpp = 32, + .default_bpp = 16, + }, { + .win_mode = { /* 7.0" 800x480 */ + .left_margin = 8, + .right_margin = 13, + .upper_margin = 7, + .lower_margin = 5, + .hsync_len = 3, + .vsync_len = 1, + .xres = 800, + .yres = 480, + }, + .max_bpp = 32, + .default_bpp = 16, + }, +}; + +static struct s3c_fb_platdata real6410_lcd_pdata __initdata = { + .setup_gpio = s3c64xx_fb_gpio_setup_24bpp, + .win[0] = &real6410_fb_win[0], + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, +}; + +static struct mtd_partition real6410_nand_part[] = { + [0] = { + .name = "uboot", + .size = SZ_1M, + .offset = 0, + }, + [1] = { + .name = "kernel", + .size = SZ_2M, + .offset = SZ_1M, + }, + [2] = { + .name = "rootfs", + .size = MTDPART_SIZ_FULL, + .offset = SZ_1M + SZ_2M, + }, +}; + +static struct s3c2410_nand_set real6410_nand_sets[] = { + [0] = { + .name = "nand", + .nr_chips = 1, + .nr_partitions = ARRAY_SIZE(real6410_nand_part), + .partitions = real6410_nand_part, + }, +}; + +static struct s3c2410_platform_nand real6410_nand_info = { + .tacls = 25, + .twrph0 = 55, + .twrph1 = 40, + .nr_sets = ARRAY_SIZE(real6410_nand_sets), + .sets = real6410_nand_sets, +}; + static struct platform_device *real6410_devices[] __initdata = { &real6410_device_eth, &s3c_device_hsmmc0, &s3c_device_hsmmc1, + &s3c_device_fb, + &s3c_device_nand, + &s3c_device_adc, + &s3c_device_ts, + &s3c_device_ohci, +}; + +static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { + .delay = 10000, + .presc = 49, + .oversampling_shift = 2, }; static void __init real6410_map_io(void) { + u32 tmp; + s3c64xx_init_io(NULL, 0); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(real6410_uartcfgs, ARRAY_SIZE(real6410_uartcfgs)); + + /* set the LCD type */ + tmp = __raw_readl(S3C64XX_SPCON); + tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK; + tmp |= S3C64XX_SPCON_LCD_SEL_RGB; + __raw_writel(tmp, S3C64XX_SPCON); + + /* remove the LCD bypass */ + tmp = __raw_readl(S3C64XX_MODEM_MIFPCON); + tmp &= ~MIFPCON_LCD_BYPASS; + __raw_writel(tmp, S3C64XX_MODEM_MIFPCON); +} + +/* + * real6410_features string + * + * 0-9 LCD configuration + * + */ +static char real6410_features_str[12] __initdata = "0"; + +static int __init real6410_features_setup(char *str) +{ + if (str) + strlcpy(real6410_features_str, str, + sizeof(real6410_features_str)); + return 1; +} + +__setup("real6410=", real6410_features_setup); + +#define FEATURE_SCREEN (1 << 0) + +struct real6410_features_t { + int done; + int lcd_index; +}; + +static void real6410_parse_features( + struct real6410_features_t *features, + const char *features_str) +{ + const char *fp = features_str; + + features->done = 0; + features->lcd_index = 0; + + while (*fp) { + char f = *fp++; + + switch (f) { + case '0'...'9': /* tft screen */ + if (features->done & FEATURE_SCREEN) { + printk(KERN_INFO "REAL6410: '%c' ignored, " + "screen type already set\n", f); + } else { + int li = f - '0'; + if (li >= ARRAY_SIZE(real6410_fb_win)) + printk(KERN_INFO "REAL6410: '%c' out " + "of range LCD mode\n", f); + else { + features->lcd_index = li; + } + } + features->done |= FEATURE_SCREEN; + break; + } + } } static void __init real6410_machine_init(void) { u32 cs1; + struct real6410_features_t features = { 0 }; + + printk(KERN_INFO "REAL6410: Option string real6410=%s\n", + real6410_features_str); + + /* Parse the feature string */ + real6410_parse_features(&features, real6410_features_str); + + real6410_lcd_pdata.win[0] = &real6410_fb_win[features.lcd_index]; + + printk(KERN_INFO "REAL6410: selected LCD display is %dx%d\n", + real6410_lcd_pdata.win[0]->win_mode.xres, + real6410_lcd_pdata.win[0]->win_mode.yres); + + s3c_fb_set_platdata(&real6410_lcd_pdata); + s3c_nand_set_platdata(&real6410_nand_info); + s3c24xx_ts_set_platdata(&s3c_ts_platform); /* configure nCS1 width to 16 bits */ @@ -136,6 +322,8 @@ static void __init real6410_machine_init(void) (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) | (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1); + gpio_request(S3C64XX_GPF(15), "LCD power"); + platform_add_devices(real6410_devices, ARRAY_SIZE(real6410_devices)); } diff --git a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c index 000736877df..8f3091182f9 100644 --- a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c +++ b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c @@ -23,15 +23,6 @@ extern void s3c64xx_fb_gpio_setup_24bpp(void) { - unsigned int gpio; - - for (gpio = S3C64XX_GPI(0); gpio <= S3C64XX_GPI(15); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } - - for (gpio = S3C64XX_GPJ(0); gpio <= S3C64XX_GPJ(11); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + s3c_gpio_cfgrange_nopull(S3C64XX_GPI(0), 16, S3C_GPIO_SFN(2)); + s3c_gpio_cfgrange_nopull(S3C64XX_GPJ(0), 12, S3C_GPIO_SFN(2)); } diff --git a/arch/arm/mach-s3c64xx/setup-ide.c b/arch/arm/mach-s3c64xx/setup-ide.c index c12c315f33b..41b425602d8 100644 --- a/arch/arm/mach-s3c64xx/setup-ide.c +++ b/arch/arm/mach-s3c64xx/setup-ide.c @@ -17,11 +17,11 @@ #include <mach/map.h> #include <mach/regs-clock.h> #include <plat/gpio-cfg.h> +#include <plat/ata.h> void s3c64xx_ide_setup_gpio(void) { u32 reg; - u32 gpio = 0; reg = readl(S3C_MEM_SYS_CFG) & (~0x3f); @@ -32,15 +32,12 @@ void s3c64xx_ide_setup_gpio(void) s3c_gpio_cfgpin(S3C64XX_GPB(4), S3C_GPIO_SFN(4)); /* Set XhiDATA[15:0] pins as CF Data[15:0] */ - for (gpio = S3C64XX_GPK(0); gpio <= S3C64XX_GPK(15); gpio++) - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin_range(S3C64XX_GPK(0), 16, S3C_GPIO_SFN(5)); /* Set XhiADDR[2:0] pins as CF ADDR[2:0] */ - for (gpio = S3C64XX_GPL(0); gpio <= S3C64XX_GPL(2); gpio++) - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(6)); + s3c_gpio_cfgpin_range(S3C64XX_GPL(0), 3, S3C_GPIO_SFN(6)); /* Set Xhi ctrl pins as CF ctrl pins(IORDY, IOWR, IORD, CE[0:1]) */ s3c_gpio_cfgpin(S3C64XX_GPM(5), S3C_GPIO_SFN(1)); - for (gpio = S3C64XX_GPM(0); gpio <= S3C64XX_GPM(4); gpio++) - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(6)); + s3c_gpio_cfgpin_range(S3C64XX_GPM(0), 5, S3C_GPIO_SFN(6)); } diff --git a/arch/arm/mach-s3c64xx/setup-keypad.c b/arch/arm/mach-s3c64xx/setup-keypad.c index abc34e4e1a9..f8ed0d22db7 100644 --- a/arch/arm/mach-s3c64xx/setup-keypad.c +++ b/arch/arm/mach-s3c64xx/setup-keypad.c @@ -12,23 +12,13 @@ #include <linux/gpio.h> #include <plat/gpio-cfg.h> +#include <plat/keypad.h> void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols) { - unsigned int gpio; - unsigned int end; - /* Set all the necessary GPK pins to special-function 3: KP_ROW[x] */ - end = S3C64XX_GPK(8 + rows); - for (gpio = S3C64XX_GPK(8); gpio < end; gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + s3c_gpio_cfgrange_nopull(S3C64XX_GPK(8), 8 + rows, S3C_GPIO_SFN(3)); /* Set all the necessary GPL pins to special-function 3: KP_COL[x] */ - end = S3C64XX_GPL(0 + cols); - for (gpio = S3C64XX_GPL(0); gpio < end; gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + s3c_gpio_cfgrange_nopull(S3C64XX_GPL(0), cols, S3C_GPIO_SFN(3)); } diff --git a/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c b/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c index 32235959137..6eac071afae 100644 --- a/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c +++ b/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c @@ -24,16 +24,9 @@ void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) { struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - unsigned int gpio; - unsigned int end; - end = S3C64XX_GPG(2 + width); - - /* Set all the necessary GPG pins to special-function 0 */ - for (gpio = S3C64XX_GPG(0); gpio < end; gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + /* Set all the necessary GPG pins to special-function 2 */ + s3c_gpio_cfgrange_nopull(S3C64XX_GPG(0), 2 + width, S3C_GPIO_SFN(2)); if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP); @@ -44,16 +37,9 @@ void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) { struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - unsigned int gpio; - unsigned int end; - end = S3C64XX_GPH(2 + width); - - /* Set all the necessary GPG pins to special-function 0 */ - for (gpio = S3C64XX_GPH(0); gpio < end; gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + /* Set all the necessary GPH pins to special-function 2 */ + s3c_gpio_cfgrange_nopull(S3C64XX_GPH(0), 2 + width, S3C_GPIO_SFN(2)); if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP); @@ -63,20 +49,9 @@ void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) { - unsigned int gpio; - unsigned int end; + /* Set all the necessary GPH pins to special-function 3 */ + s3c_gpio_cfgrange_nopull(S3C64XX_GPH(6), width, S3C_GPIO_SFN(3)); - end = S3C64XX_GPH(6 + width); - - /* Set all the necessary GPH pins to special-function 1 */ - for (gpio = S3C64XX_GPH(6); gpio < end; gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } - - /* Set all the necessary GPC pins to special-function 1 */ - for (gpio = S3C64XX_GPC(4); gpio < S3C64XX_GPC(6); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + /* Set all the necessary GPC pins to special-function 3 */ + s3c_gpio_cfgrange_nopull(S3C64XX_GPC(4), 2, S3C_GPIO_SFN(3)); } diff --git a/arch/arm/mach-s5p6442/Kconfig b/arch/arm/mach-s5p6442/Kconfig index 0fda0a5df96..33569e4007c 100644 --- a/arch/arm/mach-s5p6442/Kconfig +++ b/arch/arm/mach-s5p6442/Kconfig @@ -11,7 +11,6 @@ if ARCH_S5P6442 config CPU_S5P6442 bool - select PLAT_S5P select S3C_PL330_DMA help Enable S5P6442 CPU support diff --git a/arch/arm/mach-s5p6442/clock.c b/arch/arm/mach-s5p6442/clock.c index dcd20f17212..16d6e7e61b5 100644 --- a/arch/arm/mach-s5p6442/clock.c +++ b/arch/arm/mach-s5p6442/clock.c @@ -192,6 +192,11 @@ static struct clk clk_pclkd1 = { .parent = &clk_hclkd1, }; +int s5p6442_clk_ip0_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKGATE_IP0, clk, enable); +} + int s5p6442_clk_ip3_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable); @@ -335,6 +340,16 @@ void __init_or_cpufreq s5p6442_setup_clocks(void) clk_pclkd1.rate = pclkd1; } +static struct clk init_clocks_disable[] = { + { + .name = "pdma", + .id = -1, + .parent = &clk_pclkd1, + .enable = s5p6442_clk_ip0_ctrl, + .ctrlbit = (1 << 3), + }, +}; + static struct clk init_clocks[] = { { .name = "systimer", @@ -393,10 +408,23 @@ static struct clk *clks[] __initdata = { void __init s5p6442_register_clocks(void) { + struct clk *clkptr; + int i, ret; + s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); + clkptr = init_clocks_disable; + for (i = 0; i < ARRAY_SIZE(init_clocks_disable); i++, clkptr++) { + ret = s3c24xx_register_clock(clkptr); + if (ret < 0) { + printk(KERN_ERR "Fail to register clock %s (%d)\n", + clkptr->name, ret); + } else + (clkptr->enable)(clkptr, 0); + } + s3c_pwmclk_init(); } diff --git a/arch/arm/mach-s5p6442/dev-audio.c b/arch/arm/mach-s5p6442/dev-audio.c index 7a4e34720b7..3462197ff35 100644 --- a/arch/arm/mach-s5p6442/dev-audio.c +++ b/arch/arm/mach-s5p6442/dev-audio.c @@ -21,22 +21,16 @@ static int s5p6442_cfg_i2s(struct platform_device *pdev) { + unsigned int base; + /* configure GPIO for i2s port */ switch (pdev->id) { case 1: - s3c_gpio_cfgpin(S5P6442_GPC1(0), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6442_GPC1(1), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6442_GPC1(2), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6442_GPC1(3), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6442_GPC1(4), S3C_GPIO_SFN(2)); + base = S5P6442_GPC1(0); break; case -1: - s3c_gpio_cfgpin(S5P6442_GPC0(0), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6442_GPC0(1), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6442_GPC0(2), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6442_GPC0(3), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6442_GPC0(4), S3C_GPIO_SFN(2)); + base = S5P6442_GPC0(0); break; default: @@ -44,6 +38,7 @@ static int s5p6442_cfg_i2s(struct platform_device *pdev) return -EINVAL; } + s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(2)); return 0; } @@ -111,21 +106,15 @@ struct platform_device s5p6442_device_iis1 = { static int s5p6442_pcm_cfg_gpio(struct platform_device *pdev) { + unsigned int base; + switch (pdev->id) { case 0: - s3c_gpio_cfgpin(S5P6442_GPC0(0), S3C_GPIO_SFN(3)); - s3c_gpio_cfgpin(S5P6442_GPC0(1), S3C_GPIO_SFN(3)); - s3c_gpio_cfgpin(S5P6442_GPC0(2), S3C_GPIO_SFN(3)); - s3c_gpio_cfgpin(S5P6442_GPC0(3), S3C_GPIO_SFN(3)); - s3c_gpio_cfgpin(S5P6442_GPC0(4), S3C_GPIO_SFN(3)); + base = S5P6442_GPC0(0); break; case 1: - s3c_gpio_cfgpin(S5P6442_GPC1(0), S3C_GPIO_SFN(3)); - s3c_gpio_cfgpin(S5P6442_GPC1(1), S3C_GPIO_SFN(3)); - s3c_gpio_cfgpin(S5P6442_GPC1(2), S3C_GPIO_SFN(3)); - s3c_gpio_cfgpin(S5P6442_GPC1(3), S3C_GPIO_SFN(3)); - s3c_gpio_cfgpin(S5P6442_GPC1(4), S3C_GPIO_SFN(3)); + base = S5P6442_GPC1(0); break; default: @@ -133,6 +122,7 @@ static int s5p6442_pcm_cfg_gpio(struct platform_device *pdev) return -EINVAL; } + s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(3)); return 0; } diff --git a/arch/arm/mach-s5p6442/dev-spi.c b/arch/arm/mach-s5p6442/dev-spi.c index e894651a88b..cce8c247070 100644 --- a/arch/arm/mach-s5p6442/dev-spi.c +++ b/arch/arm/mach-s5p6442/dev-spi.c @@ -38,11 +38,9 @@ static int s5p6442_spi_cfg_gpio(struct platform_device *pdev) switch (pdev->id) { case 0: s3c_gpio_cfgpin(S5P6442_GPB(0), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6442_GPB(2), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6442_GPB(3), S3C_GPIO_SFN(2)); s3c_gpio_setpull(S5P6442_GPB(0), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5P6442_GPB(2), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5P6442_GPB(3), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S5P6442_GPB(2), 2, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); break; default: diff --git a/arch/arm/mach-s5p6442/dma.c b/arch/arm/mach-s5p6442/dma.c index ad4f8704b93..7dfb13654f8 100644 --- a/arch/arm/mach-s5p6442/dma.c +++ b/arch/arm/mach-s5p6442/dma.c @@ -82,7 +82,7 @@ static struct s3c_pl330_platdata s5p6442_pdma_pdata = { static struct platform_device s5p6442_device_pdma = { .name = "s3c-pl330", - .id = 1, + .id = -1, .num_resources = ARRAY_SIZE(s5p6442_pdma_resource), .resource = s5p6442_pdma_resource, .dev = { diff --git a/arch/arm/mach-s5p6442/include/mach/regs-clock.h b/arch/arm/mach-s5p6442/include/mach/regs-clock.h index d8360b5d4ec..00828a33699 100644 --- a/arch/arm/mach-s5p6442/include/mach/regs-clock.h +++ b/arch/arm/mach-s5p6442/include/mach/regs-clock.h @@ -46,6 +46,7 @@ #define S5P_CLK_DIV5 S5P_CLKREG(0x314) #define S5P_CLK_DIV6 S5P_CLKREG(0x318) +#define S5P_CLKGATE_IP0 S5P_CLKREG(0x460) #define S5P_CLKGATE_IP3 S5P_CLKREG(0x46C) /* CLK_OUT */ diff --git a/arch/arm/mach-s5p6442/include/mach/vmalloc.h b/arch/arm/mach-s5p6442/include/mach/vmalloc.h index f5c83f02c18..4aa55e55ac4 100644 --- a/arch/arm/mach-s5p6442/include/mach/vmalloc.h +++ b/arch/arm/mach-s5p6442/include/mach/vmalloc.h @@ -12,6 +12,6 @@ #ifndef __ASM_ARCH_VMALLOC_H #define __ASM_ARCH_VMALLOC_H -#define VMALLOC_END 0xE0000000UL +#define VMALLOC_END 0xF6000000UL #endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig index fbcae935202..164d2783d38 100644 --- a/arch/arm/mach-s5p64x0/Kconfig +++ b/arch/arm/mach-s5p64x0/Kconfig @@ -9,14 +9,12 @@ if ARCH_S5P64X0 config CPU_S5P6440 bool - select PLAT_S5P select S3C_PL330_DMA help Enable S5P6440 CPU support config CPU_S5P6450 bool - select PLAT_S5P select S3C_PL330_DMA help Enable S5P6450 CPU support diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c index f93dcd8b4d6..e4883dc1c8d 100644 --- a/arch/arm/mach-s5p64x0/clock-s5p6440.c +++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c @@ -79,13 +79,16 @@ static int s5p6440_epll_set_rate(struct clk *clk, unsigned long rate) __raw_writel(epll_con, S5P64X0_EPLL_CON); __raw_writel(epll_con_k, S5P64X0_EPLL_CON_K); + printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n", + clk->rate, rate); + clk->rate = rate; return 0; } static struct clk_ops s5p6440_epll_ops = { - .get_rate = s5p64x0_epll_get_rate, + .get_rate = s5p_epll_get_rate, .set_rate = s5p6440_epll_set_rate, }; @@ -150,6 +153,12 @@ static struct clk init_clocks_disable[] = { .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 8), }, { + .name = "pdma", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 12), + }, { .name = "hsmmc", .id = 0, .parent = &clk_hclk_low.clk, @@ -331,12 +340,6 @@ static struct clk init_clocks[] = { .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 21), }, { - .name = "dma", - .id = -1, - .parent = &clk_hclk_low.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 12), - }, { .name = "uart", .id = 0, .parent = &clk_pclk_low.clk, @@ -548,7 +551,7 @@ void __init_or_cpufreq s5p6440_setup_clocks(void) /* Set S5P6440 functions for clk_fout_epll */ - clk_fout_epll.enable = s5p64x0_epll_enable; + clk_fout_epll.enable = s5p_epll_enable; clk_fout_epll.ops = &s5p6440_epll_ops; clk_48m.enable = s5p64x0_clk48m_ctrl; diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c index f9afb05b217..7dbf3c968f5 100644 --- a/arch/arm/mach-s5p64x0/clock-s5p6450.c +++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c @@ -80,13 +80,16 @@ static int s5p6450_epll_set_rate(struct clk *clk, unsigned long rate) __raw_writel(epll_con, S5P64X0_EPLL_CON); __raw_writel(epll_con_k, S5P64X0_EPLL_CON_K); + printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n", + clk->rate, rate); + clk->rate = rate; return 0; } static struct clk_ops s5p6450_epll_ops = { - .get_rate = s5p64x0_epll_get_rate, + .get_rate = s5p_epll_get_rate, .set_rate = s5p6450_epll_set_rate, }; @@ -186,6 +189,12 @@ static struct clk init_clocks_disable[] = { .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 3), }, { + .name = "pdma", + .id = -1, + .parent = &clk_hclk_low.clk, + .enable = s5p64x0_hclk0_ctrl, + .ctrlbit = (1 << 12), + }, { .name = "hsmmc", .id = 0, .parent = &clk_hclk_low.clk, @@ -283,12 +292,6 @@ static struct clk init_clocks[] = { .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 21), }, { - .name = "dma", - .id = -1, - .parent = &clk_hclk_low.clk, - .enable = s5p64x0_hclk0_ctrl, - .ctrlbit = (1 << 12), - }, { .name = "uart", .id = 0, .parent = &clk_pclk_low.clk, @@ -581,7 +584,7 @@ void __init_or_cpufreq s5p6450_setup_clocks(void) /* Set S5P6450 functions for clk_fout_epll */ - clk_fout_epll.enable = s5p64x0_epll_enable; + clk_fout_epll.enable = s5p_epll_enable; clk_fout_epll.ops = &s5p6450_epll_ops; clk_48m.enable = s5p64x0_clk48m_ctrl; diff --git a/arch/arm/mach-s5p64x0/clock.c b/arch/arm/mach-s5p64x0/clock.c index 523ba8039ac..b52c6e2f37a 100644 --- a/arch/arm/mach-s5p64x0/clock.c +++ b/arch/arm/mach-s5p64x0/clock.c @@ -73,24 +73,6 @@ static const u32 clock_table[][3] = { {L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P64X0_CLKDIV0_HCLK_SHIFT)}, }; -int s5p64x0_epll_enable(struct clk *clk, int enable) -{ - unsigned int ctrlbit = clk->ctrlbit; - unsigned int epll_con = __raw_readl(S5P64X0_EPLL_CON) & ~ctrlbit; - - if (enable) - __raw_writel(epll_con | ctrlbit, S5P64X0_EPLL_CON); - else - __raw_writel(epll_con, S5P64X0_EPLL_CON); - - return 0; -} - -unsigned long s5p64x0_epll_get_rate(struct clk *clk) -{ - return clk->rate; -} - unsigned long s5p64x0_armclk_get_rate(struct clk *clk) { unsigned long rate = clk_get_rate(clk->parent); diff --git a/arch/arm/mach-s5p64x0/dev-audio.c b/arch/arm/mach-s5p64x0/dev-audio.c index fa097bd68ca..396bacc0a39 100644 --- a/arch/arm/mach-s5p64x0/dev-audio.c +++ b/arch/arm/mach-s5p64x0/dev-audio.c @@ -24,13 +24,8 @@ static int s5p6440_cfg_i2s(struct platform_device *pdev) /* configure GPIO for i2s port */ switch (pdev->id) { case -1: - s3c_gpio_cfgpin(S5P6440_GPR(4), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6440_GPR(5), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin_range(S5P6440_GPR(4), 5, S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin_range(S5P6440_GPR(13), 2, S3C_GPIO_SFN(5)); break; default: @@ -47,13 +42,9 @@ static int s5p6450_cfg_i2s(struct platform_device *pdev) switch (pdev->id) { case -1: s3c_gpio_cfgpin(S5P6450_GPB(4), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6450_GPR(4), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6450_GPR(5), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6450_GPR(6), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6450_GPR(7), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6450_GPR(8), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6450_GPR(13), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5P6450_GPR(14), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin_range(S5P6450_GPR(4), 5, S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin_range(S5P6450_GPR(13), 2, S3C_GPIO_SFN(5)); + break; default: @@ -116,11 +107,8 @@ static int s5p6440_pcm_cfg_gpio(struct platform_device *pdev) { switch (pdev->id) { case 0: - s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin_range(S5P6440_GPR(6), 3, S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin_range(S5P6440_GPR(13), 2, S3C_GPIO_SFN(2)); break; default: diff --git a/arch/arm/mach-s5p64x0/dev-spi.c b/arch/arm/mach-s5p64x0/dev-spi.c index 5b69ec4c8af..e78ee18c76e 100644 --- a/arch/arm/mach-s5p64x0/dev-spi.c +++ b/arch/arm/mach-s5p64x0/dev-spi.c @@ -39,23 +39,15 @@ static char *s5p64x0_spi_src_clks[] = { */ static int s5p6440_spi_cfg_gpio(struct platform_device *pdev) { + unsigned int base; + switch (pdev->id) { case 0: - s3c_gpio_cfgpin(S5P6440_GPC(0), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPC(1), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPC(2), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5P6440_GPC(0), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5P6440_GPC(1), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5P6440_GPC(2), S3C_GPIO_PULL_UP); + base = S5P6440_GPC(0); break; case 1: - s3c_gpio_cfgpin(S5P6440_GPC(4), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPC(5), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6440_GPC(6), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5P6440_GPC(4), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5P6440_GPC(5), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5P6440_GPC(6), S3C_GPIO_PULL_UP); + base = S5P6440_GPC(4); break; default: @@ -63,28 +55,23 @@ static int s5p6440_spi_cfg_gpio(struct platform_device *pdev) return -EINVAL; } + s3c_gpio_cfgall_range(base, 3, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); + return 0; } static int s5p6450_spi_cfg_gpio(struct platform_device *pdev) { + unsigned int base; + switch (pdev->id) { case 0: - s3c_gpio_cfgpin(S5P6450_GPC(0), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6450_GPC(1), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6450_GPC(2), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5P6450_GPC(0), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5P6450_GPC(1), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5P6450_GPC(2), S3C_GPIO_PULL_UP); + base = S5P6450_GPC(0); break; case 1: - s3c_gpio_cfgpin(S5P6450_GPC(4), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6450_GPC(5), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5P6450_GPC(6), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5P6450_GPC(4), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5P6450_GPC(5), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5P6450_GPC(6), S3C_GPIO_PULL_UP); + base = S5P6450_GPC(4); break; default: @@ -92,6 +79,9 @@ static int s5p6450_spi_cfg_gpio(struct platform_device *pdev) return -EINVAL; } + s3c_gpio_cfgall_range(base, 3, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); + return 0; } diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c index 29a8c241004..d7ad944b347 100644 --- a/arch/arm/mach-s5p64x0/dma.c +++ b/arch/arm/mach-s5p64x0/dma.c @@ -122,7 +122,7 @@ static struct s3c_pl330_platdata s5p6450_pdma_pdata = { static struct platform_device s5p64x0_device_pdma = { .name = "s3c-pl330", - .id = 0, + .id = -1, .num_resources = ARRAY_SIZE(s5p64x0_pdma_resource), .resource = s5p64x0_pdma_resource, .dev = { diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-clock.h b/arch/arm/mach-s5p64x0/include/mach/regs-clock.h index 58e1bc81380..a133f22fa15 100644 --- a/arch/arm/mach-s5p64x0/include/mach/regs-clock.h +++ b/arch/arm/mach-s5p64x0/include/mach/regs-clock.h @@ -60,4 +60,6 @@ #define ARM_DIV_RATIO_SHIFT 0 #define ARM_DIV_MASK (0xF << ARM_DIV_RATIO_SHIFT) +#define S5P_EPLL_CON S5P64X0_EPLL_CON + #endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/vmalloc.h b/arch/arm/mach-s5p64x0/include/mach/vmalloc.h index 97a9df38f1c..38dcc71a03c 100644 --- a/arch/arm/mach-s5p64x0/include/mach/vmalloc.h +++ b/arch/arm/mach-s5p64x0/include/mach/vmalloc.h @@ -15,6 +15,6 @@ #ifndef __ASM_ARCH_VMALLOC_H #define __ASM_ARCH_VMALLOC_H -#define VMALLOC_END 0xE0000000UL +#define VMALLOC_END 0xF6000000UL #endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-s5p64x0/setup-i2c0.c b/arch/arm/mach-s5p64x0/setup-i2c0.c index dc4cc65a501..46b463917c5 100644 --- a/arch/arm/mach-s5p64x0/setup-i2c0.c +++ b/arch/arm/mach-s5p64x0/setup-i2c0.c @@ -25,18 +25,14 @@ struct platform_device; /* don't need the contents */ void s5p6440_i2c0_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgpin(S5P6440_GPB(5), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5P6440_GPB(5), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5P6440_GPB(6), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5P6440_GPB(6), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S5P6440_GPB(5), 2, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); } void s5p6450_i2c0_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgpin(S5P6450_GPB(5), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5P6450_GPB(5), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5P6450_GPB(6), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5P6450_GPB(6), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S5P6450_GPB(5), 2, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); } void s3c_i2c0_cfg_gpio(struct platform_device *dev) { } diff --git a/arch/arm/mach-s5p64x0/setup-i2c1.c b/arch/arm/mach-s5p64x0/setup-i2c1.c index 2edd7912f8e..6ad3b986021 100644 --- a/arch/arm/mach-s5p64x0/setup-i2c1.c +++ b/arch/arm/mach-s5p64x0/setup-i2c1.c @@ -25,18 +25,14 @@ struct platform_device; /* don't need the contents */ void s5p6440_i2c1_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgpin(S5P6440_GPR(9), S3C_GPIO_SFN(6)); - s3c_gpio_setpull(S5P6440_GPR(9), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5P6440_GPR(10), S3C_GPIO_SFN(6)); - s3c_gpio_setpull(S5P6440_GPR(10), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S5P6440_GPR(9), 2, + S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP); } void s5p6450_i2c1_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgpin(S5P6450_GPR(9), S3C_GPIO_SFN(6)); - s3c_gpio_setpull(S5P6450_GPR(9), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5P6450_GPR(10), S3C_GPIO_SFN(6)); - s3c_gpio_setpull(S5P6450_GPR(10), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S5P6450_GPR(9), 2, + S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP); } void s3c_i2c1_cfg_gpio(struct platform_device *dev) { } diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig index 77ae4bfb74b..b8fbf2fcba6 100644 --- a/arch/arm/mach-s5pc100/Kconfig +++ b/arch/arm/mach-s5pc100/Kconfig @@ -9,7 +9,6 @@ if ARCH_S5PC100 config CPU_S5PC100 bool - select PLAT_S5P select S5P_EXT_INT select S3C_PL330_DMA help diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile index a021ed1fb4b..eecab57d2e5 100644 --- a/arch/arm/mach-s5pc100/Makefile +++ b/arch/arm/mach-s5pc100/Makefile @@ -11,7 +11,7 @@ obj- := # Core support for S5PC100 system -obj-$(CONFIG_CPU_S5PC100) += cpu.o init.o clock.o gpiolib.o irq-gpio.o +obj-$(CONFIG_CPU_S5PC100) += cpu.o init.o clock.o gpiolib.o obj-$(CONFIG_CPU_S5PC100) += setup-i2c0.o obj-$(CONFIG_CPU_S5PC100) += dma.o diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c index 084abd13b0a..2d4a761a516 100644 --- a/arch/arm/mach-s5pc100/clock.c +++ b/arch/arm/mach-s5pc100/clock.c @@ -273,24 +273,6 @@ static struct clksrc_clk clk_div_hdmi = { .reg_div = { .reg = S5P_CLK_DIV3, .shift = 28, .size = 4 }, }; -static int s5pc100_epll_enable(struct clk *clk, int enable) -{ - unsigned int ctrlbit = clk->ctrlbit; - unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit; - - if (enable) - __raw_writel(epll_con | ctrlbit, S5P_EPLL_CON); - else - __raw_writel(epll_con, S5P_EPLL_CON); - - return 0; -} - -static unsigned long s5pc100_epll_get_rate(struct clk *clk) -{ - return clk->rate; -} - static u32 epll_div[][4] = { { 32750000, 131, 3, 4 }, { 32768000, 131, 3, 4 }, @@ -341,13 +323,16 @@ static int s5pc100_epll_set_rate(struct clk *clk, unsigned long rate) __raw_writel(epll_con, S5P_EPLL_CON); + printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n", + clk->rate, rate); + clk->rate = rate; return 0; } static struct clk_ops s5pc100_epll_ops = { - .get_rate = s5pc100_epll_get_rate, + .get_rate = s5p_epll_get_rate, .set_rate = s5pc100_epll_set_rate, }; @@ -691,55 +676,55 @@ static struct clk init_clocks_disable[] = { }, { .name = "iis", .id = 0, - .parent = &clk_div_d1_bus.clk, + .parent = &clk_div_pclkd1.clk, .enable = s5pc100_d1_5_ctrl, .ctrlbit = (1 << 0), }, { .name = "iis", .id = 1, - .parent = &clk_div_d1_bus.clk, + .parent = &clk_div_pclkd1.clk, .enable = s5pc100_d1_5_ctrl, .ctrlbit = (1 << 1), }, { .name = "iis", .id = 2, - .parent = &clk_div_d1_bus.clk, + .parent = &clk_div_pclkd1.clk, .enable = s5pc100_d1_5_ctrl, .ctrlbit = (1 << 2), }, { .name = "ac97", .id = -1, - .parent = &clk_div_d1_bus.clk, + .parent = &clk_div_pclkd1.clk, .enable = s5pc100_d1_5_ctrl, .ctrlbit = (1 << 3), }, { .name = "pcm", .id = 0, - .parent = &clk_div_d1_bus.clk, + .parent = &clk_div_pclkd1.clk, .enable = s5pc100_d1_5_ctrl, .ctrlbit = (1 << 4), }, { .name = "pcm", .id = 1, - .parent = &clk_div_d1_bus.clk, + .parent = &clk_div_pclkd1.clk, .enable = s5pc100_d1_5_ctrl, .ctrlbit = (1 << 5), }, { .name = "spdif", .id = -1, - .parent = &clk_div_d1_bus.clk, + .parent = &clk_div_pclkd1.clk, .enable = s5pc100_d1_5_ctrl, .ctrlbit = (1 << 6), }, { .name = "adc", .id = -1, - .parent = &clk_div_d1_bus.clk, + .parent = &clk_div_pclkd1.clk, .enable = s5pc100_d1_5_ctrl, .ctrlbit = (1 << 7), }, { .name = "keypad", .id = -1, - .parent = &clk_div_d1_bus.clk, + .parent = &clk_div_pclkd1.clk, .enable = s5pc100_d1_5_ctrl, .ctrlbit = (1 << 8), }, { @@ -848,6 +833,18 @@ struct clksrc_sources clk_src_group3 = { .nr_sources = ARRAY_SIZE(clk_src_group3_list), }; +static struct clksrc_clk clk_sclk_audio0 = { + .clk = { + .name = "sclk_audio", + .id = 0, + .ctrlbit = (1 << 8), + .enable = s5pc100_sclk1_ctrl, + }, + .sources = &clk_src_group3, + .reg_src = { .reg = S5P_CLK_SRC3, .shift = 12, .size = 3 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 }, +}; + static struct clk *clk_src_group4_list[] = { [0] = &clk_mout_epll.clk, [1] = &clk_div_mpll.clk, @@ -862,6 +859,18 @@ struct clksrc_sources clk_src_group4 = { .nr_sources = ARRAY_SIZE(clk_src_group4_list), }; +static struct clksrc_clk clk_sclk_audio1 = { + .clk = { + .name = "sclk_audio", + .id = 1, + .ctrlbit = (1 << 9), + .enable = s5pc100_sclk1_ctrl, + }, + .sources = &clk_src_group4, + .reg_src = { .reg = S5P_CLK_SRC3, .shift = 16, .size = 3 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 }, +}; + static struct clk *clk_src_group5_list[] = { [0] = &clk_mout_epll.clk, [1] = &clk_div_mpll.clk, @@ -875,6 +884,18 @@ struct clksrc_sources clk_src_group5 = { .nr_sources = ARRAY_SIZE(clk_src_group5_list), }; +static struct clksrc_clk clk_sclk_audio2 = { + .clk = { + .name = "sclk_audio", + .id = 2, + .ctrlbit = (1 << 10), + .enable = s5pc100_sclk1_ctrl, + }, + .sources = &clk_src_group5, + .reg_src = { .reg = S5P_CLK_SRC3, .shift = 20, .size = 3 }, + .reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 }, +}; + static struct clk *clk_src_group6_list[] = { [0] = &s5p_clk_27m, [1] = &clk_vclk54m, @@ -944,6 +965,64 @@ struct clksrc_sources clk_src_pwi = { .nr_sources = ARRAY_SIZE(clk_src_pwi_list), }; +static struct clk *clk_sclk_spdif_list[] = { + [0] = &clk_sclk_audio0.clk, + [1] = &clk_sclk_audio1.clk, + [2] = &clk_sclk_audio2.clk, +}; + +struct clksrc_sources clk_src_sclk_spdif = { + .sources = clk_sclk_spdif_list, + .nr_sources = ARRAY_SIZE(clk_sclk_spdif_list), +}; + +static int s5pc100_spdif_set_rate(struct clk *clk, unsigned long rate) +{ + struct clk *pclk; + int ret; + + pclk = clk_get_parent(clk); + if (IS_ERR(pclk)) + return -EINVAL; + + ret = pclk->ops->set_rate(pclk, rate); + clk_put(pclk); + + return ret; +} + +static unsigned long s5pc100_spdif_get_rate(struct clk *clk) +{ + struct clk *pclk; + int rate; + + pclk = clk_get_parent(clk); + if (IS_ERR(pclk)) + return -EINVAL; + + rate = pclk->ops->get_rate(clk); + clk_put(pclk); + + return rate; +} + +static struct clk_ops s5pc100_sclk_spdif_ops = { + .set_rate = s5pc100_spdif_set_rate, + .get_rate = s5pc100_spdif_get_rate, +}; + +static struct clksrc_clk clk_sclk_spdif = { + .clk = { + .name = "sclk_spdif", + .id = -1, + .ctrlbit = (1 << 11), + .enable = s5pc100_sclk1_ctrl, + .ops = &s5pc100_sclk_spdif_ops, + }, + .sources = &clk_src_sclk_spdif, + .reg_src = { .reg = S5P_CLK_SRC3, .shift = 24, .size = 2 }, +}; + static struct clksrc_clk clksrcs[] = { { .clk = { @@ -1001,39 +1080,6 @@ static struct clksrc_clk clksrcs[] = { .reg_src = { .reg = S5P_CLK_SRC2, .shift = 28, .size = 2 }, }, { .clk = { - .name = "sclk_audio", - .id = 0, - .ctrlbit = (1 << 8), - .enable = s5pc100_sclk1_ctrl, - - }, - .sources = &clk_src_group3, - .reg_src = { .reg = S5P_CLK_SRC3, .shift = 12, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 }, - }, { - .clk = { - .name = "sclk_audio", - .id = 1, - .ctrlbit = (1 << 9), - .enable = s5pc100_sclk1_ctrl, - - }, - .sources = &clk_src_group4, - .reg_src = { .reg = S5P_CLK_SRC3, .shift = 16, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 }, - }, { - .clk = { - .name = "sclk_audio", - .id = 2, - .ctrlbit = (1 << 10), - .enable = s5pc100_sclk1_ctrl, - - }, - .sources = &clk_src_group5, - .reg_src = { .reg = S5P_CLK_SRC3, .shift = 20, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 }, - }, { - .clk = { .name = "sclk_lcd", .id = -1, .ctrlbit = (1 << 0), @@ -1179,6 +1225,10 @@ static struct clksrc_clk *sysclks[] = { &clk_div_pclkd1, &clk_div_cam, &clk_div_hdmi, + &clk_sclk_audio0, + &clk_sclk_audio1, + &clk_sclk_audio2, + &clk_sclk_spdif, }; void __init_or_cpufreq s5pc100_setup_clocks(void) @@ -1196,7 +1246,7 @@ void __init_or_cpufreq s5pc100_setup_clocks(void) unsigned int ptr; /* Set S5PC100 functions for clk_fout_epll */ - clk_fout_epll.enable = s5pc100_epll_enable; + clk_fout_epll.enable = s5p_epll_enable; clk_fout_epll.ops = &s5pc100_epll_ops; printk(KERN_DEBUG "%s: registering clocks\n", __func__); diff --git a/arch/arm/mach-s5pc100/dev-audio.c b/arch/arm/mach-s5pc100/dev-audio.c index a699ed6acc2..564e195ec49 100644 --- a/arch/arm/mach-s5pc100/dev-audio.c +++ b/arch/arm/mach-s5pc100/dev-audio.c @@ -24,19 +24,11 @@ static int s5pc100_cfg_i2s(struct platform_device *pdev) /* configure GPIO for i2s port */ switch (pdev->id) { case 1: - s3c_gpio_cfgpin(S5PC100_GPC(0), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PC100_GPC(1), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PC100_GPC(2), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PC100_GPC(3), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PC100_GPC(4), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(2)); break; case 2: - s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(4)); - s3c_gpio_cfgpin(S5PC100_GPG3(1), S3C_GPIO_SFN(4)); - s3c_gpio_cfgpin(S5PC100_GPG3(2), S3C_GPIO_SFN(4)); - s3c_gpio_cfgpin(S5PC100_GPG3(3), S3C_GPIO_SFN(4)); - s3c_gpio_cfgpin(S5PC100_GPG3(4), S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin_range(S5PC100_GPG3(0), 5, S3C_GPIO_SFN(4)); break; case -1: /* Dedicated pins */ @@ -144,19 +136,11 @@ static int s5pc100_pcm_cfg_gpio(struct platform_device *pdev) { switch (pdev->id) { case 0: - s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5PC100_GPG3(1), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5PC100_GPG3(2), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5PC100_GPG3(3), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S5PC100_GPG3(4), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin_range(S5PC100_GPG3(0), 5, S3C_GPIO_SFN(5)); break; case 1: - s3c_gpio_cfgpin(S5PC100_GPC(0), S3C_GPIO_SFN(3)); - s3c_gpio_cfgpin(S5PC100_GPC(1), S3C_GPIO_SFN(3)); - s3c_gpio_cfgpin(S5PC100_GPC(2), S3C_GPIO_SFN(3)); - s3c_gpio_cfgpin(S5PC100_GPC(3), S3C_GPIO_SFN(3)); - s3c_gpio_cfgpin(S5PC100_GPC(4), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(3)); break; default: @@ -231,13 +215,7 @@ struct platform_device s5pc100_device_pcm1 = { static int s5pc100_ac97_cfg_gpio(struct platform_device *pdev) { - s3c_gpio_cfgpin(S5PC100_GPC(0), S3C_GPIO_SFN(4)); - s3c_gpio_cfgpin(S5PC100_GPC(1), S3C_GPIO_SFN(4)); - s3c_gpio_cfgpin(S5PC100_GPC(2), S3C_GPIO_SFN(4)); - s3c_gpio_cfgpin(S5PC100_GPC(3), S3C_GPIO_SFN(4)); - s3c_gpio_cfgpin(S5PC100_GPC(4), S3C_GPIO_SFN(4)); - - return 0; + return s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(4)); } static struct resource s5pc100_ac97_resource[] = { @@ -285,3 +263,57 @@ struct platform_device s5pc100_device_ac97 = { .coherent_dma_mask = DMA_BIT_MASK(32), }, }; + +/* S/PDIF Controller platform_device */ +static int s5pc100_spdif_cfg_gpd(struct platform_device *pdev) +{ + s3c_gpio_cfgpin_range(S5PC100_GPD(5), 2, S3C_GPIO_SFN(3)); + + return 0; +} + +static int s5pc100_spdif_cfg_gpg3(struct platform_device *pdev) +{ + s3c_gpio_cfgpin_range(S5PC100_GPG3(5), 2, S3C_GPIO_SFN(3)); + + return 0; +} + +static struct resource s5pc100_spdif_resource[] = { + [0] = { + .start = S5PC100_PA_SPDIF, + .end = S5PC100_PA_SPDIF + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_SPDIF, + .end = DMACH_SPDIF, + .flags = IORESOURCE_DMA, + }, +}; + +static struct s3c_audio_pdata s5p_spdif_pdata = { + .cfg_gpio = s5pc100_spdif_cfg_gpd, +}; + +static u64 s5pc100_spdif_dmamask = DMA_BIT_MASK(32); + +struct platform_device s5pc100_device_spdif = { + .name = "samsung-spdif", + .id = -1, + .num_resources = ARRAY_SIZE(s5pc100_spdif_resource), + .resource = s5pc100_spdif_resource, + .dev = { + .platform_data = &s5p_spdif_pdata, + .dma_mask = &s5pc100_spdif_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +void __init s5pc100_spdif_setup_gpio(int gpio) +{ + if (gpio == S5PC100_SPDIF_GPD) + s5p_spdif_pdata.cfg_gpio = s5pc100_spdif_cfg_gpd; + else + s5p_spdif_pdata.cfg_gpio = s5pc100_spdif_cfg_gpg3; +} diff --git a/arch/arm/mach-s5pc100/dev-spi.c b/arch/arm/mach-s5pc100/dev-spi.c index a0ef7c302c1..57b19794d9b 100644 --- a/arch/arm/mach-s5pc100/dev-spi.c +++ b/arch/arm/mach-s5pc100/dev-spi.c @@ -38,30 +38,20 @@ static int s5pc100_spi_cfg_gpio(struct platform_device *pdev) { switch (pdev->id) { case 0: - s3c_gpio_cfgpin(S5PC100_GPB(0), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PC100_GPB(1), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PC100_GPB(2), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PC100_GPB(0), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5PC100_GPB(1), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5PC100_GPB(2), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S5PC100_GPB(0), 3, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); break; case 1: - s3c_gpio_cfgpin(S5PC100_GPB(4), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PC100_GPB(5), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PC100_GPB(6), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PC100_GPB(4), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5PC100_GPB(5), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5PC100_GPB(6), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S5PC100_GPB(4), 3, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); break; case 2: s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(3)); - s3c_gpio_cfgpin(S5PC100_GPG3(2), S3C_GPIO_SFN(3)); - s3c_gpio_cfgpin(S5PC100_GPG3(3), S3C_GPIO_SFN(3)); s3c_gpio_setpull(S5PC100_GPG3(0), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5PC100_GPG3(2), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5PC100_GPG3(3), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S5PC100_GPB(2), 2, + S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); break; default: diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c index 0f5517571e2..bf4cd0fb97c 100644 --- a/arch/arm/mach-s5pc100/dma.c +++ b/arch/arm/mach-s5pc100/dma.c @@ -81,7 +81,7 @@ static struct s3c_pl330_platdata s5pc100_pdma0_pdata = { static struct platform_device s5pc100_device_pdma0 = { .name = "s3c-pl330", - .id = 1, + .id = 0, .num_resources = ARRAY_SIZE(s5pc100_pdma0_resource), .resource = s5pc100_pdma0_resource, .dev = { @@ -143,7 +143,7 @@ static struct s3c_pl330_platdata s5pc100_pdma1_pdata = { static struct platform_device s5pc100_device_pdma1 = { .name = "s3c-pl330", - .id = 2, + .id = 1, .num_resources = ARRAY_SIZE(s5pc100_pdma1_resource), .resource = s5pc100_pdma1_resource, .dev = { diff --git a/arch/arm/mach-s5pc100/gpiolib.c b/arch/arm/mach-s5pc100/gpiolib.c index 0fab7f2cd8b..20856eb7dd5 100644 --- a/arch/arm/mach-s5pc100/gpiolib.c +++ b/arch/arm/mach-s5pc100/gpiolib.c @@ -1,5 +1,7 @@ -/* - * arch/arm/plat-s5pc100/gpiolib.c +/* linux/arch/arm/mach-s5pc100/gpiolib.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Copyright 2009 Samsung Electronics Co * Kyungmin Park <kyungmin.park@samsung.com> @@ -61,30 +63,6 @@ * L3 8 4Bit None */ -static int s5pc100_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset) -{ - return S3C_IRQ_GPIO(chip->base + offset); -} - -static int s5pc100_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset) -{ - int base; - - base = chip->base - S5PC100_GPH0(0); - if (base == 0) - return IRQ_EINT(offset); - base = chip->base - S5PC100_GPH1(0); - if (base == 0) - return IRQ_EINT(8 + offset); - base = chip->base - S5PC100_GPH2(0); - if (base == 0) - return IRQ_EINT(16 + offset); - base = chip->base - S5PC100_GPH3(0); - if (base == 0) - return IRQ_EINT(24 + offset); - return -EINVAL; -} - static struct s3c_gpio_cfg gpio_cfg = { .set_config = s3c_gpio_setcfg_s3c64xx_4bit, .set_pull = s3c_gpio_setpull_updown, @@ -104,209 +82,150 @@ static struct s3c_gpio_cfg gpio_cfg_noint = { .get_pull = s3c_gpio_getpull_updown, }; +/* + * GPIO bank's base address given the index of the bank in the + * list of all gpio banks. + */ +#define S5PC100_BANK_BASE(bank_nr) (S5P_VA_GPIO + ((bank_nr) * 0x20)) + +/* + * Following are the gpio banks in S5PC100. + * + * The 'config' member when left to NULL, is initialized to the default + * structure gpio_cfg in the init function below. + * + * The 'base' member is also initialized in the init function below. + * Note: The initialization of 'base' member of s3c_gpio_chip structure + * uses the above macro and depends on the banks being listed in order here. + */ static struct s3c_gpio_chip s5pc100_gpio_chips[] = { { - .base = S5PC100_GPA0_BASE, - .config = &gpio_cfg, .chip = { .base = S5PC100_GPA0(0), .ngpio = S5PC100_GPIO_A0_NR, .label = "GPA0", }, }, { - .base = S5PC100_GPA1_BASE, - .config = &gpio_cfg, .chip = { .base = S5PC100_GPA1(0), .ngpio = S5PC100_GPIO_A1_NR, .label = "GPA1", }, }, { - .base = S5PC100_GPB_BASE, - .config = &gpio_cfg, .chip = { .base = S5PC100_GPB(0), .ngpio = S5PC100_GPIO_B_NR, .label = "GPB", }, }, { - .base = S5PC100_GPC_BASE, - .config = &gpio_cfg, .chip = { .base = S5PC100_GPC(0), .ngpio = S5PC100_GPIO_C_NR, .label = "GPC", }, }, { - .base = S5PC100_GPD_BASE, - .config = &gpio_cfg, .chip = { .base = S5PC100_GPD(0), .ngpio = S5PC100_GPIO_D_NR, .label = "GPD", }, }, { - .base = S5PC100_GPE0_BASE, - .config = &gpio_cfg, .chip = { .base = S5PC100_GPE0(0), .ngpio = S5PC100_GPIO_E0_NR, .label = "GPE0", }, }, { - .base = S5PC100_GPE1_BASE, - .config = &gpio_cfg, .chip = { .base = S5PC100_GPE1(0), .ngpio = S5PC100_GPIO_E1_NR, .label = "GPE1", }, }, { - .base = S5PC100_GPF0_BASE, - .config = &gpio_cfg, .chip = { .base = S5PC100_GPF0(0), .ngpio = S5PC100_GPIO_F0_NR, .label = "GPF0", }, }, { - .base = S5PC100_GPF1_BASE, - .config = &gpio_cfg, .chip = { .base = S5PC100_GPF1(0), .ngpio = S5PC100_GPIO_F1_NR, .label = "GPF1", }, }, { - .base = S5PC100_GPF2_BASE, - .config = &gpio_cfg, .chip = { .base = S5PC100_GPF2(0), .ngpio = S5PC100_GPIO_F2_NR, .label = "GPF2", }, }, { - .base = S5PC100_GPF3_BASE, - .config = &gpio_cfg, .chip = { .base = S5PC100_GPF3(0), .ngpio = S5PC100_GPIO_F3_NR, .label = "GPF3", }, }, { - .base = S5PC100_GPG0_BASE, - .config = &gpio_cfg, .chip = { .base = S5PC100_GPG0(0), .ngpio = S5PC100_GPIO_G0_NR, .label = "GPG0", }, }, { - .base = S5PC100_GPG1_BASE, - .config = &gpio_cfg, .chip = { .base = S5PC100_GPG1(0), .ngpio = S5PC100_GPIO_G1_NR, .label = "GPG1", }, }, { - .base = S5PC100_GPG2_BASE, - .config = &gpio_cfg, .chip = { .base = S5PC100_GPG2(0), .ngpio = S5PC100_GPIO_G2_NR, .label = "GPG2", }, }, { - .base = S5PC100_GPG3_BASE, - .config = &gpio_cfg, .chip = { .base = S5PC100_GPG3(0), .ngpio = S5PC100_GPIO_G3_NR, .label = "GPG3", }, }, { - .base = S5PC100_GPH0_BASE, - .config = &gpio_cfg_eint, - .chip = { - .base = S5PC100_GPH0(0), - .ngpio = S5PC100_GPIO_H0_NR, - .label = "GPH0", - }, - }, { - .base = S5PC100_GPH1_BASE, - .config = &gpio_cfg_eint, - .chip = { - .base = S5PC100_GPH1(0), - .ngpio = S5PC100_GPIO_H1_NR, - .label = "GPH1", - }, - }, { - .base = S5PC100_GPH2_BASE, - .config = &gpio_cfg_eint, - .chip = { - .base = S5PC100_GPH2(0), - .ngpio = S5PC100_GPIO_H2_NR, - .label = "GPH2", - }, - }, { - .base = S5PC100_GPH3_BASE, - .config = &gpio_cfg_eint, - .chip = { - .base = S5PC100_GPH3(0), - .ngpio = S5PC100_GPIO_H3_NR, - .label = "GPH3", - }, - }, { - .base = S5PC100_GPI_BASE, - .config = &gpio_cfg, .chip = { .base = S5PC100_GPI(0), .ngpio = S5PC100_GPIO_I_NR, .label = "GPI", }, }, { - .base = S5PC100_GPJ0_BASE, - .config = &gpio_cfg, .chip = { .base = S5PC100_GPJ0(0), .ngpio = S5PC100_GPIO_J0_NR, .label = "GPJ0", }, }, { - .base = S5PC100_GPJ1_BASE, - .config = &gpio_cfg, .chip = { .base = S5PC100_GPJ1(0), .ngpio = S5PC100_GPIO_J1_NR, .label = "GPJ1", }, }, { - .base = S5PC100_GPJ2_BASE, - .config = &gpio_cfg, .chip = { .base = S5PC100_GPJ2(0), .ngpio = S5PC100_GPIO_J2_NR, .label = "GPJ2", }, }, { - .base = S5PC100_GPJ3_BASE, - .config = &gpio_cfg, .chip = { .base = S5PC100_GPJ3(0), .ngpio = S5PC100_GPIO_J3_NR, .label = "GPJ3", }, }, { - .base = S5PC100_GPJ4_BASE, - .config = &gpio_cfg, .chip = { .base = S5PC100_GPJ4(0), .ngpio = S5PC100_GPIO_J4_NR, .label = "GPJ4", }, }, { - .base = S5PC100_GPK0_BASE, .config = &gpio_cfg_noint, .chip = { .base = S5PC100_GPK0(0), @@ -314,7 +233,6 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = { .label = "GPK0", }, }, { - .base = S5PC100_GPK1_BASE, .config = &gpio_cfg_noint, .chip = { .base = S5PC100_GPK1(0), @@ -322,7 +240,6 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = { .label = "GPK1", }, }, { - .base = S5PC100_GPK2_BASE, .config = &gpio_cfg_noint, .chip = { .base = S5PC100_GPK2(0), @@ -330,7 +247,6 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = { .label = "GPK2", }, }, { - .base = S5PC100_GPK3_BASE, .config = &gpio_cfg_noint, .chip = { .base = S5PC100_GPK3(0), @@ -338,7 +254,6 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = { .label = "GPK3", }, }, { - .base = S5PC100_GPL0_BASE, .config = &gpio_cfg_noint, .chip = { .base = S5PC100_GPL0(0), @@ -346,7 +261,6 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = { .label = "GPL0", }, }, { - .base = S5PC100_GPL1_BASE, .config = &gpio_cfg_noint, .chip = { .base = S5PC100_GPL1(0), @@ -354,7 +268,6 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = { .label = "GPL1", }, }, { - .base = S5PC100_GPL2_BASE, .config = &gpio_cfg_noint, .chip = { .base = S5PC100_GPL2(0), @@ -362,7 +275,6 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = { .label = "GPL2", }, }, { - .base = S5PC100_GPL3_BASE, .config = &gpio_cfg_noint, .chip = { .base = S5PC100_GPL3(0), @@ -370,56 +282,72 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = { .label = "GPL3", }, }, { - .base = S5PC100_GPL4_BASE, .config = &gpio_cfg_noint, .chip = { .base = S5PC100_GPL4(0), .ngpio = S5PC100_GPIO_L4_NR, .label = "GPL4", }, + }, { + .base = (S5P_VA_GPIO + 0xC00), + .config = &gpio_cfg_eint, + .irq_base = IRQ_EINT(0), + .chip = { + .base = S5PC100_GPH0(0), + .ngpio = S5PC100_GPIO_H0_NR, + .label = "GPH0", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO + 0xC20), + .config = &gpio_cfg_eint, + .irq_base = IRQ_EINT(8), + .chip = { + .base = S5PC100_GPH1(0), + .ngpio = S5PC100_GPIO_H1_NR, + .label = "GPH1", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO + 0xC40), + .config = &gpio_cfg_eint, + .irq_base = IRQ_EINT(16), + .chip = { + .base = S5PC100_GPH2(0), + .ngpio = S5PC100_GPIO_H2_NR, + .label = "GPH2", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO + 0xC60), + .config = &gpio_cfg_eint, + .irq_base = IRQ_EINT(24), + .chip = { + .base = S5PC100_GPH3(0), + .ngpio = S5PC100_GPIO_H3_NR, + .label = "GPH3", + .to_irq = samsung_gpiolib_to_irq, + }, }, }; -/* FIXME move from irq-gpio.c */ -extern struct irq_chip s5pc100_gpioint; -extern void s5pc100_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc); - -static __init void s5pc100_gpiolib_link(struct s3c_gpio_chip *chip) +static __init int s5pc100_gpiolib_init(void) { - /* Interrupt */ - if (chip->config == &gpio_cfg) { - int i, irq; - - chip->chip.to_irq = s5pc100_gpiolib_to_irq; + struct s3c_gpio_chip *chip = s5pc100_gpio_chips; + int nr_chips = ARRAY_SIZE(s5pc100_gpio_chips); + int gpioint_group = 0; + int i; - for (i = 0; i < chip->chip.ngpio; i++) { - irq = S3C_IRQ_GPIO_BASE + chip->chip.base + i; - set_irq_chip(irq, &s5pc100_gpioint); - set_irq_data(irq, &chip->chip); - set_irq_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); + for (i = 0; i < nr_chips; i++, chip++) { + if (chip->config == NULL) { + chip->config = &gpio_cfg; + chip->group = gpioint_group++; } - } else if (chip->config == &gpio_cfg_eint) { - chip->chip.to_irq = s5pc100_gpiolib_to_eint; + if (chip->base == NULL) + chip->base = S5PC100_BANK_BASE(i); } -} - -static __init int s5pc100_gpiolib_init(void) -{ - struct s3c_gpio_chip *chip; - int nr_chips; - - chip = s5pc100_gpio_chips; - nr_chips = ARRAY_SIZE(s5pc100_gpio_chips); - - for (; nr_chips > 0; nr_chips--, chip++) - s5pc100_gpiolib_link(chip); - - samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips, - ARRAY_SIZE(s5pc100_gpio_chips)); - /* Interrupt */ - set_irq_chained_handler(IRQ_GPIOINT, s5pc100_irq_gpioint_handler); + samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips, nr_chips); return 0; } diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h index 71ae1f52df1..29a8a12d9b4 100644 --- a/arch/arm/mach-s5pc100/include/mach/gpio.h +++ b/arch/arm/mach-s5pc100/include/mach/gpio.h @@ -146,13 +146,6 @@ enum s5p_gpio_number { /* define the number of gpios we need to the one after the MP04() range */ #define ARCH_NR_GPIOS (S5PC100_GPIO_END + 1) -#define EINT_MODE S3C_GPIO_SFN(0x2) - -#define EINT_GPIO_0(x) S5PC100_GPH0(x) -#define EINT_GPIO_1(x) S5PC100_GPH1(x) -#define EINT_GPIO_2(x) S5PC100_GPH2(x) -#define EINT_GPIO_3(x) S5PC100_GPH3(x) - #include <asm-generic/gpio.h> #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h index 06513e64724..d2eb4757381 100644 --- a/arch/arm/mach-s5pc100/include/mach/irqs.h +++ b/arch/arm/mach-s5pc100/include/mach/irqs.h @@ -48,8 +48,8 @@ #define IRQ_SPI1 S5P_IRQ_VIC1(16) #define IRQ_SPI2 S5P_IRQ_VIC1(17) #define IRQ_IRDA S5P_IRQ_VIC1(18) -#define IRQ_CAN0 S5P_IRQ_VIC1(19) -#define IRQ_CAN1 S5P_IRQ_VIC1(20) +#define IRQ_IIC2 S5P_IRQ_VIC1(19) +#define IRQ_IIC3 S5P_IRQ_VIC1(20) #define IRQ_HSIRX S5P_IRQ_VIC1(21) #define IRQ_HSITX S5P_IRQ_VIC1(22) #define IRQ_UHOST S5P_IRQ_VIC1(23) @@ -100,11 +100,12 @@ #define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0)) #define S5P_EINT_BASE2 (IRQ_VIC_END + 1) -#define S3C_IRQ_GPIO_BASE (IRQ_EINT(31) + 1) -#define S3C_IRQ_GPIO(x) (S3C_IRQ_GPIO_BASE + (x)) +/* GPIO interrupt */ +#define S5P_GPIOINT_BASE (IRQ_EINT(31) + 1) +#define S5P_GPIOINT_GROUP_MAXNR 21 -/* Until MP04 Groups -> 40 (exactly 39) Groups * 8 ~= 320 GPIOs */ -#define NR_IRQS (S3C_IRQ_GPIO(320) + 1) +/* Set the default NR_IRQS */ +#define NR_IRQS (IRQ_EINT(31) + S5P_GPIOINT_COUNT + 1) /* Compatibility */ #define IRQ_LCD_FIFO IRQ_LCD0 diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h index 8751ef4a680..32e9cab5c86 100644 --- a/arch/arm/mach-s5pc100/include/mach/map.h +++ b/arch/arm/mach-s5pc100/include/mach/map.h @@ -110,6 +110,8 @@ #define S5PC100_PA_PCM0 0xF2400000 #define S5PC100_PA_PCM1 0xF2500000 +#define S5PC100_PA_SPDIF 0xF2600000 + #define S5PC100_PA_TSADC (0xF3000000) /* KEYPAD */ diff --git a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h index dd6295e1251..0bf73209ec7 100644 --- a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h +++ b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h @@ -11,43 +11,6 @@ #include <mach/map.h> -/* S5PC100 */ -#define S5PC100_GPIO_BASE S5P_VA_GPIO -#define S5PC100_GPA0_BASE (S5PC100_GPIO_BASE + 0x0000) -#define S5PC100_GPA1_BASE (S5PC100_GPIO_BASE + 0x0020) -#define S5PC100_GPB_BASE (S5PC100_GPIO_BASE + 0x0040) -#define S5PC100_GPC_BASE (S5PC100_GPIO_BASE + 0x0060) -#define S5PC100_GPD_BASE (S5PC100_GPIO_BASE + 0x0080) -#define S5PC100_GPE0_BASE (S5PC100_GPIO_BASE + 0x00A0) -#define S5PC100_GPE1_BASE (S5PC100_GPIO_BASE + 0x00C0) -#define S5PC100_GPF0_BASE (S5PC100_GPIO_BASE + 0x00E0) -#define S5PC100_GPF1_BASE (S5PC100_GPIO_BASE + 0x0100) -#define S5PC100_GPF2_BASE (S5PC100_GPIO_BASE + 0x0120) -#define S5PC100_GPF3_BASE (S5PC100_GPIO_BASE + 0x0140) -#define S5PC100_GPG0_BASE (S5PC100_GPIO_BASE + 0x0160) -#define S5PC100_GPG1_BASE (S5PC100_GPIO_BASE + 0x0180) -#define S5PC100_GPG2_BASE (S5PC100_GPIO_BASE + 0x01A0) -#define S5PC100_GPG3_BASE (S5PC100_GPIO_BASE + 0x01C0) -#define S5PC100_GPH0_BASE (S5PC100_GPIO_BASE + 0x0C00) -#define S5PC100_GPH1_BASE (S5PC100_GPIO_BASE + 0x0C20) -#define S5PC100_GPH2_BASE (S5PC100_GPIO_BASE + 0x0C40) -#define S5PC100_GPH3_BASE (S5PC100_GPIO_BASE + 0x0C60) -#define S5PC100_GPI_BASE (S5PC100_GPIO_BASE + 0x01E0) -#define S5PC100_GPJ0_BASE (S5PC100_GPIO_BASE + 0x0200) -#define S5PC100_GPJ1_BASE (S5PC100_GPIO_BASE + 0x0220) -#define S5PC100_GPJ2_BASE (S5PC100_GPIO_BASE + 0x0240) -#define S5PC100_GPJ3_BASE (S5PC100_GPIO_BASE + 0x0260) -#define S5PC100_GPJ4_BASE (S5PC100_GPIO_BASE + 0x0280) -#define S5PC100_GPK0_BASE (S5PC100_GPIO_BASE + 0x02A0) -#define S5PC100_GPK1_BASE (S5PC100_GPIO_BASE + 0x02C0) -#define S5PC100_GPK2_BASE (S5PC100_GPIO_BASE + 0x02E0) -#define S5PC100_GPK3_BASE (S5PC100_GPIO_BASE + 0x0300) -#define S5PC100_GPL0_BASE (S5PC100_GPIO_BASE + 0x0320) -#define S5PC100_GPL1_BASE (S5PC100_GPIO_BASE + 0x0340) -#define S5PC100_GPL2_BASE (S5PC100_GPIO_BASE + 0x0360) -#define S5PC100_GPL3_BASE (S5PC100_GPIO_BASE + 0x0380) -#define S5PC100_GPL4_BASE (S5PC100_GPIO_BASE + 0x03A0) - #define S5PC100EINT30CON (S5P_VA_GPIO + 0xE00) #define S5P_EINT_CON(x) (S5PC100EINT30CON + ((x) * 0x4)) @@ -64,12 +27,12 @@ #define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7)) -/* values for S5P_EXTINT0 */ -#define S5P_EXTINT_LOWLEV (0x00) -#define S5P_EXTINT_HILEV (0x01) -#define S5P_EXTINT_FALLEDGE (0x02) -#define S5P_EXTINT_RISEEDGE (0x03) -#define S5P_EXTINT_BOTHEDGE (0x04) +#define EINT_MODE S3C_GPIO_SFN(0x2) + +#define EINT_GPIO_0(x) S5PC100_GPH0(x) +#define EINT_GPIO_1(x) S5PC100_GPH1(x) +#define EINT_GPIO_2(x) S5PC100_GPH2(x) +#define EINT_GPIO_3(x) S5PC100_GPH3(x) #endif /* __ASM_MACH_S5PC100_REGS_GPIO_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/vmalloc.h b/arch/arm/mach-s5pc100/include/mach/vmalloc.h index be9df79903e..44c8e5726d9 100644 --- a/arch/arm/mach-s5pc100/include/mach/vmalloc.h +++ b/arch/arm/mach-s5pc100/include/mach/vmalloc.h @@ -12,6 +12,6 @@ #ifndef __ASM_ARCH_VMALLOC_H #define __ASM_ARCH_VMALLOC_H -#define VMALLOC_END (0xe0000000UL) +#define VMALLOC_END 0xF6000000UL #endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-s5pc100/irq-gpio.c b/arch/arm/mach-s5pc100/irq-gpio.c deleted file mode 100644 index 2bf86c18bc7..00000000000 --- a/arch/arm/mach-s5pc100/irq-gpio.c +++ /dev/null @@ -1,266 +0,0 @@ -/* - * arch/arm/mach-s5pc100/irq-gpio.c - * - * Copyright (C) 2009 Samsung Electronics - * - * S5PC100 - Interrupt handling for IRQ_GPIO${group}(x) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/gpio.h> - -#include <mach/map.h> -#include <plat/gpio-cfg.h> - -#define S5P_GPIOREG(x) (S5P_VA_GPIO + (x)) - -#define CON_OFFSET 0x700 -#define MASK_OFFSET 0x900 -#define PEND_OFFSET 0xA00 -#define CON_OFFSET_2 0xE00 -#define MASK_OFFSET_2 0xF00 -#define PEND_OFFSET_2 0xF40 - -#define GPIOINT_LEVEL_LOW 0x0 -#define GPIOINT_LEVEL_HIGH 0x1 -#define GPIOINT_EDGE_FALLING 0x2 -#define GPIOINT_EDGE_RISING 0x3 -#define GPIOINT_EDGE_BOTH 0x4 - -static int group_to_con_offset(int group) -{ - return group << 2; -} - -static int group_to_mask_offset(int group) -{ - return group << 2; -} - -static int group_to_pend_offset(int group) -{ - return group << 2; -} - -static int s5pc100_get_start(unsigned int group) -{ - switch (group) { - case 0: return S5PC100_GPIO_A0_START; - case 1: return S5PC100_GPIO_A1_START; - case 2: return S5PC100_GPIO_B_START; - case 3: return S5PC100_GPIO_C_START; - case 4: return S5PC100_GPIO_D_START; - case 5: return S5PC100_GPIO_E0_START; - case 6: return S5PC100_GPIO_E1_START; - case 7: return S5PC100_GPIO_F0_START; - case 8: return S5PC100_GPIO_F1_START; - case 9: return S5PC100_GPIO_F2_START; - case 10: return S5PC100_GPIO_F3_START; - case 11: return S5PC100_GPIO_G0_START; - case 12: return S5PC100_GPIO_G1_START; - case 13: return S5PC100_GPIO_G2_START; - case 14: return S5PC100_GPIO_G3_START; - case 15: return S5PC100_GPIO_I_START; - case 16: return S5PC100_GPIO_J0_START; - case 17: return S5PC100_GPIO_J1_START; - case 18: return S5PC100_GPIO_J2_START; - case 19: return S5PC100_GPIO_J3_START; - case 20: return S5PC100_GPIO_J4_START; - default: - BUG(); - } - - return -EINVAL; -} - -static int s5pc100_get_group(unsigned int irq) -{ - irq -= S3C_IRQ_GPIO(0); - - switch (irq) { - case S5PC100_GPIO_A0_START ... S5PC100_GPIO_A1_START - 1: - return 0; - case S5PC100_GPIO_A1_START ... S5PC100_GPIO_B_START - 1: - return 1; - case S5PC100_GPIO_B_START ... S5PC100_GPIO_C_START - 1: - return 2; - case S5PC100_GPIO_C_START ... S5PC100_GPIO_D_START - 1: - return 3; - case S5PC100_GPIO_D_START ... S5PC100_GPIO_E0_START - 1: - return 4; - case S5PC100_GPIO_E0_START ... S5PC100_GPIO_E1_START - 1: - return 5; - case S5PC100_GPIO_E1_START ... S5PC100_GPIO_F0_START - 1: - return 6; - case S5PC100_GPIO_F0_START ... S5PC100_GPIO_F1_START - 1: - return 7; - case S5PC100_GPIO_F1_START ... S5PC100_GPIO_F2_START - 1: - return 8; - case S5PC100_GPIO_F2_START ... S5PC100_GPIO_F3_START - 1: - return 9; - case S5PC100_GPIO_F3_START ... S5PC100_GPIO_G0_START - 1: - return 10; - case S5PC100_GPIO_G0_START ... S5PC100_GPIO_G1_START - 1: - return 11; - case S5PC100_GPIO_G1_START ... S5PC100_GPIO_G2_START - 1: - return 12; - case S5PC100_GPIO_G2_START ... S5PC100_GPIO_G3_START - 1: - return 13; - case S5PC100_GPIO_G3_START ... S5PC100_GPIO_H0_START - 1: - return 14; - case S5PC100_GPIO_I_START ... S5PC100_GPIO_J0_START - 1: - return 15; - case S5PC100_GPIO_J0_START ... S5PC100_GPIO_J1_START - 1: - return 16; - case S5PC100_GPIO_J1_START ... S5PC100_GPIO_J2_START - 1: - return 17; - case S5PC100_GPIO_J2_START ... S5PC100_GPIO_J3_START - 1: - return 18; - case S5PC100_GPIO_J3_START ... S5PC100_GPIO_J4_START - 1: - return 19; - case S5PC100_GPIO_J4_START ... S5PC100_GPIO_K0_START - 1: - return 20; - default: - BUG(); - } - - return -EINVAL; -} - -static int s5pc100_get_offset(unsigned int irq) -{ - struct gpio_chip *chip = get_irq_data(irq); - return irq - S3C_IRQ_GPIO(chip->base); -} - -static void s5pc100_gpioint_ack(unsigned int irq) -{ - int group, offset, pend_offset; - unsigned int value; - - group = s5pc100_get_group(irq); - offset = s5pc100_get_offset(irq); - pend_offset = group_to_pend_offset(group); - - value = __raw_readl(S5P_GPIOREG(PEND_OFFSET) + pend_offset); - value |= 1 << offset; - __raw_writel(value, S5P_GPIOREG(PEND_OFFSET) + pend_offset); -} - -static void s5pc100_gpioint_mask(unsigned int irq) -{ - int group, offset, mask_offset; - unsigned int value; - - group = s5pc100_get_group(irq); - offset = s5pc100_get_offset(irq); - mask_offset = group_to_mask_offset(group); - - value = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset); - value |= 1 << offset; - __raw_writel(value, S5P_GPIOREG(MASK_OFFSET) + mask_offset); -} - -static void s5pc100_gpioint_unmask(unsigned int irq) -{ - int group, offset, mask_offset; - unsigned int value; - - group = s5pc100_get_group(irq); - offset = s5pc100_get_offset(irq); - mask_offset = group_to_mask_offset(group); - - value = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset); - value &= ~(1 << offset); - __raw_writel(value, S5P_GPIOREG(MASK_OFFSET) + mask_offset); -} - -static void s5pc100_gpioint_mask_ack(unsigned int irq) -{ - s5pc100_gpioint_mask(irq); - s5pc100_gpioint_ack(irq); -} - -static int s5pc100_gpioint_set_type(unsigned int irq, unsigned int type) -{ - int group, offset, con_offset; - unsigned int value; - - group = s5pc100_get_group(irq); - offset = s5pc100_get_offset(irq); - con_offset = group_to_con_offset(group); - - switch (type) { - case IRQ_TYPE_NONE: - printk(KERN_WARNING "No irq type\n"); - return -EINVAL; - case IRQ_TYPE_EDGE_RISING: - type = GPIOINT_EDGE_RISING; - break; - case IRQ_TYPE_EDGE_FALLING: - type = GPIOINT_EDGE_FALLING; - break; - case IRQ_TYPE_EDGE_BOTH: - type = GPIOINT_EDGE_BOTH; - break; - case IRQ_TYPE_LEVEL_HIGH: - type = GPIOINT_LEVEL_HIGH; - break; - case IRQ_TYPE_LEVEL_LOW: - type = GPIOINT_LEVEL_LOW; - break; - default: - BUG(); - } - - - value = __raw_readl(S5P_GPIOREG(CON_OFFSET) + con_offset); - value &= ~(0xf << (offset * 0x4)); - value |= (type << (offset * 0x4)); - __raw_writel(value, S5P_GPIOREG(CON_OFFSET) + con_offset); - - return 0; -} - -struct irq_chip s5pc100_gpioint = { - .name = "GPIO", - .ack = s5pc100_gpioint_ack, - .mask = s5pc100_gpioint_mask, - .mask_ack = s5pc100_gpioint_mask_ack, - .unmask = s5pc100_gpioint_unmask, - .set_type = s5pc100_gpioint_set_type, -}; - -void s5pc100_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc) -{ - int group, offset, pend_offset, mask_offset; - int real_irq, group_end; - unsigned int pend, mask; - - group_end = 21; - - for (group = 0; group < group_end; group++) { - pend_offset = group_to_pend_offset(group); - pend = __raw_readl(S5P_GPIOREG(PEND_OFFSET) + pend_offset); - if (!pend) - continue; - - mask_offset = group_to_mask_offset(group); - mask = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset); - pend &= ~mask; - - for (offset = 0; offset < 8; offset++) { - if (pend & (1 << offset)) { - real_irq = s5pc100_get_start(group) + offset; - generic_handle_irq(S3C_IRQ_GPIO(real_irq)); - } - } - } -} diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c index 880fb075092..18b405d514d 100644 --- a/arch/arm/mach-s5pc100/mach-smdkc100.c +++ b/arch/arm/mach-s5pc100/mach-smdkc100.c @@ -47,6 +47,7 @@ #include <plat/adc.h> #include <plat/keypad.h> #include <plat/ts.h> +#include <plat/audio.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define SMDKC100_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -196,6 +197,7 @@ static struct platform_device *smdkc100_devices[] __initdata = { &s5p_device_fimc0, &s5p_device_fimc1, &s5p_device_fimc2, + &s5pc100_device_spdif, }; static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { @@ -226,6 +228,8 @@ static void __init smdkc100_machine_init(void) samsung_keypad_set_platdata(&smdkc100_keypad_data); + s5pc100_spdif_setup_gpio(S5PC100_SPDIF_GPD); + /* LCD init */ gpio_request(S5PC100_GPD(0), "GPD"); gpio_request(S5PC100_GPH0(6), "GPH0"); diff --git a/arch/arm/mach-s5pc100/setup-fb-24bpp.c b/arch/arm/mach-s5pc100/setup-fb-24bpp.c index 6eba6cb8e2f..d31c0f3fe22 100644 --- a/arch/arm/mach-s5pc100/setup-fb-24bpp.c +++ b/arch/arm/mach-s5pc100/setup-fb-24bpp.c @@ -22,27 +22,15 @@ #define DISR_OFFSET 0x7008 -void s5pc100_fb_gpio_setup_24bpp(void) +static void s5pc100_fb_setgpios(unsigned int base, unsigned int nr) { - unsigned int gpio = 0; - - for (gpio = S5PC100_GPF0(0); gpio <= S5PC100_GPF0(7); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } - - for (gpio = S5PC100_GPF1(0); gpio <= S5PC100_GPF1(7); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } - - for (gpio = S5PC100_GPF2(0); gpio <= S5PC100_GPF2(7); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(2)); +} - for (gpio = S5PC100_GPF3(0); gpio <= S5PC100_GPF3(3); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } +void s5pc100_fb_gpio_setup_24bpp(void) +{ + s5pc100_fb_setgpios(S5PC100_GPF0(0), 8); + s5pc100_fb_setgpios(S5PC100_GPF1(0), 8); + s5pc100_fb_setgpios(S5PC100_GPF2(0), 8); + s5pc100_fb_setgpios(S5PC100_GPF3(0), 4); } diff --git a/arch/arm/mach-s5pc100/setup-i2c0.c b/arch/arm/mach-s5pc100/setup-i2c0.c index dd3174e6ecc..eaef7a3bda4 100644 --- a/arch/arm/mach-s5pc100/setup-i2c0.c +++ b/arch/arm/mach-s5pc100/setup-i2c0.c @@ -23,8 +23,6 @@ struct platform_device; /* don't need the contents */ void s3c_i2c0_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgpin(S5PC100_GPD(3), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PC100_GPD(3), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5PC100_GPD(4), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PC100_GPD(4), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S5PC100_GPD(3), 2, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s5pc100/setup-i2c1.c b/arch/arm/mach-s5pc100/setup-i2c1.c index d1fec26b69e..aaff74a90de 100644 --- a/arch/arm/mach-s5pc100/setup-i2c1.c +++ b/arch/arm/mach-s5pc100/setup-i2c1.c @@ -23,8 +23,6 @@ struct platform_device; /* don't need the contents */ void s3c_i2c1_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgpin(S5PC100_GPD(5), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PC100_GPD(5), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5PC100_GPD(6), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PC100_GPD(6), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S5PC100_GPD(5), 2, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s5pc100/setup-ide.c b/arch/arm/mach-s5pc100/setup-ide.c index 83575671fb5..223aae04446 100644 --- a/arch/arm/mach-s5pc100/setup-ide.c +++ b/arch/arm/mach-s5pc100/setup-ide.c @@ -17,52 +17,39 @@ #include <mach/regs-clock.h> #include <plat/gpio-cfg.h> +static void s5pc100_ide_cfg_gpios(unsigned int base, unsigned int nr) +{ + s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(4)); + + for (; nr > 0; nr--, base++) + s5p_gpio_set_drvstr(base, S5P_GPIO_DRVSTR_LV4); +} + void s5pc100_ide_setup_gpio(void) { u32 reg; - u32 gpio = 0; /* Independent CF interface, CF chip select configuration */ reg = readl(S5PC100_MEM_SYS_CFG) & (~0x3f); writel(reg | MEM_SYS_CFG_EBI_FIX_PRI_CFCON, S5PC100_MEM_SYS_CFG); /* CF_Add[0 - 2], CF_IORDY, CF_INTRQ, CF_DMARQ, CF_DMARST, CF_DMACK */ - for (gpio = S5PC100_GPJ0(0); gpio <= S5PC100_GPJ0(7); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } + s5pc100_ide_cfg_gpios(S5PC100_GPJ0(0), 8); /*CF_Data[0 - 7] */ - for (gpio = S5PC100_GPJ2(0); gpio <= S5PC100_GPJ2(7); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } + s5pc100_ide_cfg_gpios(S5PC100_GPJ2(0), 8); /* CF_Data[8 - 15] */ - for (gpio = S5PC100_GPJ3(0); gpio <= S5PC100_GPJ3(7); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } + s5pc100_ide_cfg_gpios(S5PC100_GPJ3(0), 8); /* CF_CS0, CF_CS1, CF_IORD, CF_IOWR */ - for (gpio = S5PC100_GPJ4(0); gpio <= S5PC100_GPJ4(3); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } + s5pc100_ide_cfg_gpios(S5PC100_GPJ4(0), 4); /* EBI_OE, EBI_WE */ - for (gpio = S5PC100_GPK0(6); gpio <= S5PC100_GPK0(7); gpio++) - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0)); + s3c_gpio_cfgpin_range(S5PC100_GPK0(6), 2, S3C_GPIO_SFN(0)); /* CF_OE, CF_WE */ - for (gpio = S5PC100_GPK1(6); gpio <= S5PC100_GPK1(7); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + s3c_gpio_cfgrange_nopull(S5PC100_GPK1(6), 8, S3C_GPIO_SFN(2)); /* CF_CD */ s3c_gpio_cfgpin(S5PC100_GPK3(5), S3C_GPIO_SFN(2)); diff --git a/arch/arm/mach-s5pc100/setup-keypad.c b/arch/arm/mach-s5pc100/setup-keypad.c index d0837a72a58..ada377f0c20 100644 --- a/arch/arm/mach-s5pc100/setup-keypad.c +++ b/arch/arm/mach-s5pc100/setup-keypad.c @@ -15,20 +15,9 @@ void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols) { - unsigned int gpio; - unsigned int end; - /* Set all the necessary GPH3 pins to special-function 3: KP_ROW[x] */ - end = S5PC100_GPH3(rows); - for (gpio = S5PC100_GPH3(0); gpio < end; gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + s3c_gpio_cfgrange_nopull(S5PC100_GPH3(0), rows, S3C_GPIO_SFN(3)); /* Set all the necessary GPH2 pins to special-function 3: KP_COL[x] */ - end = S5PC100_GPH2(cols); - for (gpio = S5PC100_GPH2(0); gpio < end; gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + s3c_gpio_cfgrange_nopull(S5PC100_GPH2(0), cols, S3C_GPIO_SFN(3)); } diff --git a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c index dc7208c639e..03c02d04c68 100644 --- a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c +++ b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c @@ -25,8 +25,6 @@ void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) { struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - unsigned int gpio; - unsigned int end; unsigned int num; num = width; @@ -34,20 +32,11 @@ void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) if (width == 8) num = width - 2; - end = S5PC100_GPG0(2 + num); - /* Set all the necessary GPG0/GPG1 pins to special-function 0 */ - for (gpio = S5PC100_GPG0(0); gpio < end; gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + s3c_gpio_cfgrange_nopull(S5PC100_GPG0(0), 2 + num, S3C_GPIO_SFN(2)); - if (width == 8) { - for (gpio = S5PC100_GPG1(0); gpio <= S5PC100_GPG1(1); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } - } + if (width == 8) + s3c_gpio_cfgrange_nopull(S5PC100_GPG1(0), 2, S3C_GPIO_SFN(2)); if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP); @@ -58,16 +47,9 @@ void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) { struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - unsigned int gpio; - unsigned int end; - - end = S5PC100_GPG2(2 + width); /* Set all the necessary GPG2 pins to special-function 2 */ - for (gpio = S5PC100_GPG2(0); gpio < end; gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + s3c_gpio_cfgrange_nopull(S5PC100_GPG2(0), 2 + width, S3C_GPIO_SFN(2)); if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP); @@ -78,16 +60,9 @@ void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) { struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - unsigned int gpio; - unsigned int end; - - end = S5PC100_GPG3(2 + width); /* Set all the necessary GPG3 pins to special-function 2 */ - for (gpio = S5PC100_GPG3(0); gpio < end; gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + s3c_gpio_cfgrange_nopull(S5PC100_GPG3(0), 2 + width, S3C_GPIO_SFN(2)); if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP); diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 5315fec3db8..862f239a0fd 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -11,9 +11,9 @@ if ARCH_S5PV210 config CPU_S5PV210 bool - select PLAT_S5P select S3C_PL330_DMA select S5P_EXT_INT + select S5PV210_PM if PM help Enable S5PV210 CPU support @@ -58,7 +58,6 @@ menu "S5PC110 Machines" config MACH_AQUILA bool "Aquila" select CPU_S5PV210 - select ARCH_SPARSEMEM_ENABLE select S3C_DEV_FB select S5P_DEV_FIMC0 select S5P_DEV_FIMC1 @@ -75,7 +74,7 @@ config MACH_AQUILA config MACH_GONI bool "GONI" select CPU_S5PV210 - select ARCH_SPARSEMEM_ENABLE + select S5P_GPIO_INT select S3C_DEV_FB select S5P_DEV_FIMC0 select S5P_DEV_FIMC1 @@ -83,8 +82,15 @@ config MACH_GONI select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 + select S3C_DEV_I2C1 + select S3C_DEV_I2C2 + select S3C_DEV_USB_HSOTG select S5P_DEV_ONENAND + select SAMSUNG_DEV_KEYPAD select S5PV210_SETUP_FB_24BPP + select S5PV210_SETUP_I2C1 + select S5PV210_SETUP_I2C2 + select S5PV210_SETUP_KEYPAD select S5PV210_SETUP_SDHCI help Machine support for Samsung GONI board @@ -93,7 +99,6 @@ config MACH_GONI config MACH_SMDKC110 bool "SMDKC110" select CPU_S5PV210 - select ARCH_SPARSEMEM_ENABLE select S3C_DEV_I2C1 select S3C_DEV_I2C2 select S3C_DEV_RTC @@ -113,7 +118,6 @@ menu "S5PV210 Machines" config MACH_SMDKV210 bool "SMDKV210" select CPU_S5PV210 - select ARCH_SPARSEMEM_ENABLE select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 @@ -134,6 +138,29 @@ config MACH_SMDKV210 help Machine support for Samsung SMDKV210 +config MACH_TORBRECK + bool "Torbreck" + select CPU_S5PV210 + select ARCH_SPARSEMEM_ENABLE + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_HSMMC2 + select S3C_DEV_HSMMC3 + select S3C_DEV_I2C1 + select S3C_DEV_I2C2 + select S3C_DEV_RTC + select S3C_DEV_WDT + select S5PV210_SETUP_I2C1 + select S5PV210_SETUP_I2C2 + select S5PV210_SETUP_SDHCI + help + Machine support for aESOP Torbreck + endmenu +config S5PV210_PM + bool + help + Power Management code common to S5PV210 + endif diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile index 70454891240..ff1a0db57a2 100644 --- a/arch/arm/mach-s5pv210/Makefile +++ b/arch/arm/mach-s5pv210/Makefile @@ -14,6 +14,8 @@ obj- := obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o dma.o gpiolib.o obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o +obj-$(CONFIG_S5PV210_PM) += pm.o sleep.o +obj-$(CONFIG_CPU_FREQ) += cpufreq.o # machine support @@ -21,6 +23,7 @@ obj-$(CONFIG_MACH_AQUILA) += mach-aquila.o obj-$(CONFIG_MACH_SMDKV210) += mach-smdkv210.o obj-$(CONFIG_MACH_SMDKC110) += mach-smdkc110.o obj-$(CONFIG_MACH_GONI) += mach-goni.o +obj-$(CONFIG_MACH_TORBRECK) += mach-torbreck.o # device support diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index d562670e1b0..019c3a69b0e 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -31,6 +31,8 @@ #include <plat/clock-clksrc.h> #include <plat/s5pv210.h> +static unsigned long xtal; + static struct clksrc_clk clk_mout_apll = { .clk = { .name = "mout_apll", @@ -259,6 +261,36 @@ static struct clksrc_clk clk_sclk_vpll = { .reg_src = { .reg = S5P_CLK_SRC0, .shift = 12, .size = 1 }, }; +static struct clk *clkset_moutdmc0src_list[] = { + [0] = &clk_sclk_a2m.clk, + [1] = &clk_mout_mpll.clk, + [2] = NULL, + [3] = NULL, +}; + +static struct clksrc_sources clkset_moutdmc0src = { + .sources = clkset_moutdmc0src_list, + .nr_sources = ARRAY_SIZE(clkset_moutdmc0src_list), +}; + +static struct clksrc_clk clk_mout_dmc0 = { + .clk = { + .name = "mout_dmc0", + .id = -1, + }, + .sources = &clkset_moutdmc0src, + .reg_src = { .reg = S5P_CLK_SRC6, .shift = 24, .size = 2 }, +}; + +static struct clksrc_clk clk_sclk_dmc0 = { + .clk = { + .name = "sclk_dmc0", + .id = -1, + .parent = &clk_mout_dmc0.clk, + }, + .reg_div = { .reg = S5P_CLK_DIV6, .shift = 28, .size = 4 }, +}; + static unsigned long s5pv210_clk_imem_get_rate(struct clk *clk) { return clk_get_rate(clk->parent) / 2; @@ -268,8 +300,29 @@ static struct clk_ops clk_hclk_imem_ops = { .get_rate = s5pv210_clk_imem_get_rate, }; +static unsigned long s5pv210_clk_fout_apll_get_rate(struct clk *clk) +{ + return s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508); +} + +static struct clk_ops clk_fout_apll_ops = { + .get_rate = s5pv210_clk_fout_apll_get_rate, +}; + static struct clk init_clocks_disable[] = { { + .name = "pdma", + .id = 0, + .parent = &clk_hclk_psys.clk, + .enable = s5pv210_clk_ip0_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "pdma", + .id = 1, + .parent = &clk_hclk_psys.clk, + .enable = s5pv210_clk_ip0_ctrl, + .ctrlbit = (1 << 4), + }, { .name = "rot", .id = -1, .parent = &clk_hclk_dsys.clk, @@ -431,6 +484,12 @@ static struct clk init_clocks_disable[] = { .parent = &clk_p, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1 << 6), + }, { + .name = "spdif", + .id = -1, + .parent = &clk_p, + .enable = s5pv210_clk_ip3_ctrl, + .ctrlbit = (1 << 0), }, }; @@ -660,6 +719,53 @@ static struct clksrc_sources clkset_sclk_spdif = { .nr_sources = ARRAY_SIZE(clkset_sclk_spdif_list), }; +static int s5pv210_spdif_set_rate(struct clk *clk, unsigned long rate) +{ + struct clk *pclk; + int ret; + + pclk = clk_get_parent(clk); + if (IS_ERR(pclk)) + return -EINVAL; + + ret = pclk->ops->set_rate(pclk, rate); + clk_put(pclk); + + return ret; +} + +static unsigned long s5pv210_spdif_get_rate(struct clk *clk) +{ + struct clk *pclk; + int rate; + + pclk = clk_get_parent(clk); + if (IS_ERR(pclk)) + return -EINVAL; + + rate = pclk->ops->get_rate(clk); + clk_put(pclk); + + return rate; +} + +static struct clk_ops s5pv210_sclk_spdif_ops = { + .set_rate = s5pv210_spdif_set_rate, + .get_rate = s5pv210_spdif_get_rate, +}; + +static struct clksrc_clk clk_sclk_spdif = { + .clk = { + .name = "sclk_spdif", + .id = -1, + .enable = s5pv210_clk_mask0_ctrl, + .ctrlbit = (1 << 27), + .ops = &s5pv210_sclk_spdif_ops, + }, + .sources = &clkset_sclk_spdif, + .reg_src = { .reg = S5P_CLK_SRC6, .shift = 12, .size = 2 }, +}; + static struct clk *clkset_group2_list[] = { [0] = &clk_ext_xtal_mux, [1] = &clk_xusbxti, @@ -744,15 +850,6 @@ static struct clksrc_clk clksrcs[] = { .sources = &clkset_sclk_mixer, .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 }, }, { - .clk = { - .name = "sclk_spdif", - .id = -1, - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 27), - }, - .sources = &clkset_sclk_spdif, - .reg_src = { .reg = S5P_CLK_SRC6, .shift = 12, .size = 2 }, - }, { .clk = { .name = "sclk_fimc", .id = 0, @@ -953,12 +1050,93 @@ static struct clksrc_clk *sysclks[] = { &clk_sclk_dac, &clk_sclk_pixel, &clk_sclk_hdmi, + &clk_mout_dmc0, + &clk_sclk_dmc0, + &clk_sclk_audio0, + &clk_sclk_audio1, + &clk_sclk_audio2, + &clk_sclk_spdif, +}; + +static u32 epll_div[][6] = { + { 48000000, 0, 48, 3, 3, 0 }, + { 96000000, 0, 48, 3, 2, 0 }, + { 144000000, 1, 72, 3, 2, 0 }, + { 192000000, 0, 48, 3, 1, 0 }, + { 288000000, 1, 72, 3, 1, 0 }, + { 32750000, 1, 65, 3, 4, 35127 }, + { 32768000, 1, 65, 3, 4, 35127 }, + { 45158400, 0, 45, 3, 3, 10355 }, + { 45000000, 0, 45, 3, 3, 10355 }, + { 45158000, 0, 45, 3, 3, 10355 }, + { 49125000, 0, 49, 3, 3, 9961 }, + { 49152000, 0, 49, 3, 3, 9961 }, + { 67737600, 1, 67, 3, 3, 48366 }, + { 67738000, 1, 67, 3, 3, 48366 }, + { 73800000, 1, 73, 3, 3, 47710 }, + { 73728000, 1, 73, 3, 3, 47710 }, + { 36000000, 1, 32, 3, 4, 0 }, + { 60000000, 1, 60, 3, 3, 0 }, + { 72000000, 1, 72, 3, 3, 0 }, + { 80000000, 1, 80, 3, 3, 0 }, + { 84000000, 0, 42, 3, 2, 0 }, + { 50000000, 0, 50, 3, 3, 0 }, +}; + +static int s5pv210_epll_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned int epll_con, epll_con_k; + unsigned int i; + + /* Return if nothing changed */ + if (clk->rate == rate) + return 0; + + epll_con = __raw_readl(S5P_EPLL_CON); + epll_con_k = __raw_readl(S5P_EPLL_CON1); + + epll_con_k &= ~PLL46XX_KDIV_MASK; + epll_con &= ~(1 << 27 | + PLL46XX_MDIV_MASK << PLL46XX_MDIV_SHIFT | + PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT | + PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT); + + for (i = 0; i < ARRAY_SIZE(epll_div); i++) { + if (epll_div[i][0] == rate) { + epll_con_k |= epll_div[i][5] << 0; + epll_con |= (epll_div[i][1] << 27 | + epll_div[i][2] << PLL46XX_MDIV_SHIFT | + epll_div[i][3] << PLL46XX_PDIV_SHIFT | + epll_div[i][4] << PLL46XX_SDIV_SHIFT); + break; + } + } + + if (i == ARRAY_SIZE(epll_div)) { + printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", + __func__); + return -EINVAL; + } + + __raw_writel(epll_con, S5P_EPLL_CON); + __raw_writel(epll_con_k, S5P_EPLL_CON1); + + printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n", + clk->rate, rate); + + clk->rate = rate; + + return 0; +} + +static struct clk_ops s5pv210_epll_ops = { + .set_rate = s5pv210_epll_set_rate, + .get_rate = s5p_epll_get_rate, }; void __init_or_cpufreq s5pv210_setup_clocks(void) { struct clk *xtal_clk; - unsigned long xtal; unsigned long vpllsrc; unsigned long armclk; unsigned long hclk_msys; @@ -974,6 +1152,10 @@ void __init_or_cpufreq s5pv210_setup_clocks(void) unsigned int ptr; u32 clkdiv0, clkdiv1; + /* Set functions for clk_fout_epll */ + clk_fout_epll.enable = s5p_epll_enable; + clk_fout_epll.ops = &s5pv210_epll_ops; + printk(KERN_DEBUG "%s: registering clocks\n", __func__); clkdiv0 = __raw_readl(S5P_CLK_DIV0); @@ -992,11 +1174,12 @@ void __init_or_cpufreq s5pv210_setup_clocks(void) apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508); mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502); - epll = s5p_get_pll45xx(xtal, __raw_readl(S5P_EPLL_CON), pll_4500); + epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON), + __raw_readl(S5P_EPLL_CON1), pll_4600); vpllsrc = clk_get_rate(&clk_vpllsrc.clk); vpll = s5p_get_pll45xx(vpllsrc, __raw_readl(S5P_VPLL_CON), pll_4502); - clk_fout_apll.rate = apll; + clk_fout_apll.ops = &clk_fout_apll_ops; clk_fout_mpll.rate = mpll; clk_fout_epll.rate = epll; clk_fout_vpll.rate = vpll; diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c index 2f16bfc0a11..8eb480e201b 100644 --- a/arch/arm/mach-s5pv210/cpu.c +++ b/arch/arm/mach-s5pv210/cpu.c @@ -85,6 +85,21 @@ static struct map_desc s5pv210_iodesc[] __initdata = { .pfn = __phys_to_pfn(S5PV210_PA_SROMC), .length = SZ_4K, .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_DMC0, + .pfn = __phys_to_pfn(S5PV210_PA_DMC0), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_DMC1, + .pfn = __phys_to_pfn(S5PV210_PA_DMC1), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_USB_HSPHY, + .pfn =__phys_to_pfn(S5PV210_PA_HSPHY), + .length = SZ_4K, + .type = MT_DEVICE, } }; diff --git a/arch/arm/mach-s5pv210/cpufreq.c b/arch/arm/mach-s5pv210/cpufreq.c new file mode 100644 index 00000000000..a6f22920a2c --- /dev/null +++ b/arch/arm/mach-s5pv210/cpufreq.c @@ -0,0 +1,484 @@ +/* linux/arch/arm/mach-s5pv210/cpufreq.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * CPU frequency scaling for S5PC110/S5PV210 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/cpufreq.h> + +#include <mach/map.h> +#include <mach/regs-clock.h> + +static struct clk *cpu_clk; +static struct clk *dmc0_clk; +static struct clk *dmc1_clk; +static struct cpufreq_freqs freqs; + +/* APLL M,P,S values for 1G/800Mhz */ +#define APLL_VAL_1000 ((1 << 31) | (125 << 16) | (3 << 8) | 1) +#define APLL_VAL_800 ((1 << 31) | (100 << 16) | (3 << 8) | 1) + +/* + * DRAM configurations to calculate refresh counter for changing + * frequency of memory. + */ +struct dram_conf { + unsigned long freq; /* HZ */ + unsigned long refresh; /* DRAM refresh counter * 1000 */ +}; + +/* DRAM configuration (DMC0 and DMC1) */ +static struct dram_conf s5pv210_dram_conf[2]; + +enum perf_level { + L0, L1, L2, L3, L4, +}; + +enum s5pv210_mem_type { + LPDDR = 0x1, + LPDDR2 = 0x2, + DDR2 = 0x4, +}; + +enum s5pv210_dmc_port { + DMC0 = 0, + DMC1, +}; + +static struct cpufreq_frequency_table s5pv210_freq_table[] = { + {L0, 1000*1000}, + {L1, 800*1000}, + {L2, 400*1000}, + {L3, 200*1000}, + {L4, 100*1000}, + {0, CPUFREQ_TABLE_END}, +}; + +static u32 clkdiv_val[5][11] = { + /* + * Clock divider value for following + * { APLL, A2M, HCLK_MSYS, PCLK_MSYS, + * HCLK_DSYS, PCLK_DSYS, HCLK_PSYS, PCLK_PSYS, + * ONEDRAM, MFC, G3D } + */ + + /* L0 : [1000/200/100][166/83][133/66][200/200] */ + {0, 4, 4, 1, 3, 1, 4, 1, 3, 0, 0}, + + /* L1 : [800/200/100][166/83][133/66][200/200] */ + {0, 3, 3, 1, 3, 1, 4, 1, 3, 0, 0}, + + /* L2 : [400/200/100][166/83][133/66][200/200] */ + {1, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0}, + + /* L3 : [200/200/100][166/83][133/66][200/200] */ + {3, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0}, + + /* L4 : [100/100/100][83/83][66/66][100/100] */ + {7, 7, 0, 0, 7, 0, 9, 0, 7, 0, 0}, +}; + +/* + * This function set DRAM refresh counter + * accoriding to operating frequency of DRAM + * ch: DMC port number 0 or 1 + * freq: Operating frequency of DRAM(KHz) + */ +static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq) +{ + unsigned long tmp, tmp1; + void __iomem *reg = NULL; + + if (ch == DMC0) + reg = (S5P_VA_DMC0 + 0x30); + else if (ch == DMC1) + reg = (S5P_VA_DMC1 + 0x30); + else + printk(KERN_ERR "Cannot find DMC port\n"); + + /* Find current DRAM frequency */ + tmp = s5pv210_dram_conf[ch].freq; + + do_div(tmp, freq); + + tmp1 = s5pv210_dram_conf[ch].refresh; + + do_div(tmp1, tmp); + + __raw_writel(tmp1, reg); +} + +int s5pv210_verify_speed(struct cpufreq_policy *policy) +{ + if (policy->cpu) + return -EINVAL; + + return cpufreq_frequency_table_verify(policy, s5pv210_freq_table); +} + +unsigned int s5pv210_getspeed(unsigned int cpu) +{ + if (cpu) + return 0; + + return clk_get_rate(cpu_clk) / 1000; +} + +static int s5pv210_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned long reg; + unsigned int index, priv_index; + unsigned int pll_changing = 0; + unsigned int bus_speed_changing = 0; + + freqs.old = s5pv210_getspeed(0); + + if (cpufreq_frequency_table_target(policy, s5pv210_freq_table, + target_freq, relation, &index)) + return -EINVAL; + + freqs.new = s5pv210_freq_table[index].frequency; + freqs.cpu = 0; + + if (freqs.new == freqs.old) + return 0; + + /* Finding current running level index */ + if (cpufreq_frequency_table_target(policy, s5pv210_freq_table, + freqs.old, relation, &priv_index)) + return -EINVAL; + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + if (freqs.new > freqs.old) { + /* Voltage up: will be implemented */ + } + + /* Check if there need to change PLL */ + if ((index == L0) || (priv_index == L0)) + pll_changing = 1; + + /* Check if there need to change System bus clock */ + if ((index == L4) || (priv_index == L4)) + bus_speed_changing = 1; + + if (bus_speed_changing) { + /* + * Reconfigure DRAM refresh counter value for minimum + * temporary clock while changing divider. + * expected clock is 83Mhz : 7.8usec/(1/83Mhz) = 0x287 + */ + if (pll_changing) + s5pv210_set_refresh(DMC1, 83000); + else + s5pv210_set_refresh(DMC1, 100000); + + s5pv210_set_refresh(DMC0, 83000); + } + + /* + * APLL should be changed in this level + * APLL -> MPLL(for stable transition) -> APLL + * Some clock source's clock API are not prepared. + * Do not use clock API in below code. + */ + if (pll_changing) { + /* + * 1. Temporary Change divider for MFC and G3D + * SCLKA2M(200/1=200)->(200/4=50)Mhz + */ + reg = __raw_readl(S5P_CLK_DIV2); + reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK); + reg |= (3 << S5P_CLKDIV2_G3D_SHIFT) | + (3 << S5P_CLKDIV2_MFC_SHIFT); + __raw_writel(reg, S5P_CLK_DIV2); + + /* For MFC, G3D dividing */ + do { + reg = __raw_readl(S5P_CLKDIV_STAT0); + } while (reg & ((1 << 16) | (1 << 17))); + + /* + * 2. Change SCLKA2M(200Mhz)to SCLKMPLL in MFC_MUX, G3D MUX + * (200/4=50)->(667/4=166)Mhz + */ + reg = __raw_readl(S5P_CLK_SRC2); + reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK); + reg |= (1 << S5P_CLKSRC2_G3D_SHIFT) | + (1 << S5P_CLKSRC2_MFC_SHIFT); + __raw_writel(reg, S5P_CLK_SRC2); + + do { + reg = __raw_readl(S5P_CLKMUX_STAT1); + } while (reg & ((1 << 7) | (1 << 3))); + + /* + * 3. DMC1 refresh count for 133Mhz if (index == L4) is + * true refresh counter is already programed in upper + * code. 0x287@83Mhz + */ + if (!bus_speed_changing) + s5pv210_set_refresh(DMC1, 133000); + + /* 4. SCLKAPLL -> SCLKMPLL */ + reg = __raw_readl(S5P_CLK_SRC0); + reg &= ~(S5P_CLKSRC0_MUX200_MASK); + reg |= (0x1 << S5P_CLKSRC0_MUX200_SHIFT); + __raw_writel(reg, S5P_CLK_SRC0); + + do { + reg = __raw_readl(S5P_CLKMUX_STAT0); + } while (reg & (0x1 << 18)); + + } + + /* Change divider */ + reg = __raw_readl(S5P_CLK_DIV0); + + reg &= ~(S5P_CLKDIV0_APLL_MASK | S5P_CLKDIV0_A2M_MASK | + S5P_CLKDIV0_HCLK200_MASK | S5P_CLKDIV0_PCLK100_MASK | + S5P_CLKDIV0_HCLK166_MASK | S5P_CLKDIV0_PCLK83_MASK | + S5P_CLKDIV0_HCLK133_MASK | S5P_CLKDIV0_PCLK66_MASK); + + reg |= ((clkdiv_val[index][0] << S5P_CLKDIV0_APLL_SHIFT) | + (clkdiv_val[index][1] << S5P_CLKDIV0_A2M_SHIFT) | + (clkdiv_val[index][2] << S5P_CLKDIV0_HCLK200_SHIFT) | + (clkdiv_val[index][3] << S5P_CLKDIV0_PCLK100_SHIFT) | + (clkdiv_val[index][4] << S5P_CLKDIV0_HCLK166_SHIFT) | + (clkdiv_val[index][5] << S5P_CLKDIV0_PCLK83_SHIFT) | + (clkdiv_val[index][6] << S5P_CLKDIV0_HCLK133_SHIFT) | + (clkdiv_val[index][7] << S5P_CLKDIV0_PCLK66_SHIFT)); + + __raw_writel(reg, S5P_CLK_DIV0); + + do { + reg = __raw_readl(S5P_CLKDIV_STAT0); + } while (reg & 0xff); + + /* ARM MCS value changed */ + reg = __raw_readl(S5P_ARM_MCS_CON); + reg &= ~0x3; + if (index >= L3) + reg |= 0x3; + else + reg |= 0x1; + + __raw_writel(reg, S5P_ARM_MCS_CON); + + if (pll_changing) { + /* 5. Set Lock time = 30us*24Mhz = 0x2cf */ + __raw_writel(0x2cf, S5P_APLL_LOCK); + + /* + * 6. Turn on APLL + * 6-1. Set PMS values + * 6-2. Wait untile the PLL is locked + */ + if (index == L0) + __raw_writel(APLL_VAL_1000, S5P_APLL_CON); + else + __raw_writel(APLL_VAL_800, S5P_APLL_CON); + + do { + reg = __raw_readl(S5P_APLL_CON); + } while (!(reg & (0x1 << 29))); + + /* + * 7. Change souce clock from SCLKMPLL(667Mhz) + * to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX + * (667/4=166)->(200/4=50)Mhz + */ + reg = __raw_readl(S5P_CLK_SRC2); + reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK); + reg |= (0 << S5P_CLKSRC2_G3D_SHIFT) | + (0 << S5P_CLKSRC2_MFC_SHIFT); + __raw_writel(reg, S5P_CLK_SRC2); + + do { + reg = __raw_readl(S5P_CLKMUX_STAT1); + } while (reg & ((1 << 7) | (1 << 3))); + + /* + * 8. Change divider for MFC and G3D + * (200/4=50)->(200/1=200)Mhz + */ + reg = __raw_readl(S5P_CLK_DIV2); + reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK); + reg |= (clkdiv_val[index][10] << S5P_CLKDIV2_G3D_SHIFT) | + (clkdiv_val[index][9] << S5P_CLKDIV2_MFC_SHIFT); + __raw_writel(reg, S5P_CLK_DIV2); + + /* For MFC, G3D dividing */ + do { + reg = __raw_readl(S5P_CLKDIV_STAT0); + } while (reg & ((1 << 16) | (1 << 17))); + + /* 9. Change MPLL to APLL in MSYS_MUX */ + reg = __raw_readl(S5P_CLK_SRC0); + reg &= ~(S5P_CLKSRC0_MUX200_MASK); + reg |= (0x0 << S5P_CLKSRC0_MUX200_SHIFT); + __raw_writel(reg, S5P_CLK_SRC0); + + do { + reg = __raw_readl(S5P_CLKMUX_STAT0); + } while (reg & (0x1 << 18)); + + /* + * 10. DMC1 refresh counter + * L4 : DMC1 = 100Mhz 7.8us/(1/100) = 0x30c + * Others : DMC1 = 200Mhz 7.8us/(1/200) = 0x618 + */ + if (!bus_speed_changing) + s5pv210_set_refresh(DMC1, 200000); + } + + /* + * L4 level need to change memory bus speed, hence onedram clock divier + * and memory refresh parameter should be changed + */ + if (bus_speed_changing) { + reg = __raw_readl(S5P_CLK_DIV6); + reg &= ~S5P_CLKDIV6_ONEDRAM_MASK; + reg |= (clkdiv_val[index][8] << S5P_CLKDIV6_ONEDRAM_SHIFT); + __raw_writel(reg, S5P_CLK_DIV6); + + do { + reg = __raw_readl(S5P_CLKDIV_STAT1); + } while (reg & (1 << 15)); + + /* Reconfigure DRAM refresh counter value */ + if (index != L4) { + /* + * DMC0 : 166Mhz + * DMC1 : 200Mhz + */ + s5pv210_set_refresh(DMC0, 166000); + s5pv210_set_refresh(DMC1, 200000); + } else { + /* + * DMC0 : 83Mhz + * DMC1 : 100Mhz + */ + s5pv210_set_refresh(DMC0, 83000); + s5pv210_set_refresh(DMC1, 100000); + } + } + + if (freqs.new < freqs.old) { + /* Voltage down: will be implemented */ + } + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + printk(KERN_DEBUG "Perf changed[L%d]\n", index); + + return 0; +} + +#ifdef CONFIG_PM +static int s5pv210_cpufreq_suspend(struct cpufreq_policy *policy, + pm_message_t pmsg) +{ + return 0; +} + +static int s5pv210_cpufreq_resume(struct cpufreq_policy *policy) +{ + return 0; +} +#endif + +static int check_mem_type(void __iomem *dmc_reg) +{ + unsigned long val; + + val = __raw_readl(dmc_reg + 0x4); + val = (val & (0xf << 8)); + + return val >> 8; +} + +static int __init s5pv210_cpu_init(struct cpufreq_policy *policy) +{ + unsigned long mem_type; + + cpu_clk = clk_get(NULL, "armclk"); + if (IS_ERR(cpu_clk)) + return PTR_ERR(cpu_clk); + + dmc0_clk = clk_get(NULL, "sclk_dmc0"); + if (IS_ERR(dmc0_clk)) { + clk_put(cpu_clk); + return PTR_ERR(dmc0_clk); + } + + dmc1_clk = clk_get(NULL, "hclk_msys"); + if (IS_ERR(dmc1_clk)) { + clk_put(dmc0_clk); + clk_put(cpu_clk); + return PTR_ERR(dmc1_clk); + } + + if (policy->cpu != 0) + return -EINVAL; + + /* + * check_mem_type : This driver only support LPDDR & LPDDR2. + * other memory type is not supported. + */ + mem_type = check_mem_type(S5P_VA_DMC0); + + if ((mem_type != LPDDR) && (mem_type != LPDDR2)) { + printk(KERN_ERR "CPUFreq doesn't support this memory type\n"); + return -EINVAL; + } + + /* Find current refresh counter and frequency each DMC */ + s5pv210_dram_conf[0].refresh = (__raw_readl(S5P_VA_DMC0 + 0x30) * 1000); + s5pv210_dram_conf[0].freq = clk_get_rate(dmc0_clk); + + s5pv210_dram_conf[1].refresh = (__raw_readl(S5P_VA_DMC1 + 0x30) * 1000); + s5pv210_dram_conf[1].freq = clk_get_rate(dmc1_clk); + + policy->cur = policy->min = policy->max = s5pv210_getspeed(0); + + cpufreq_frequency_table_get_attr(s5pv210_freq_table, policy->cpu); + + policy->cpuinfo.transition_latency = 40000; + + return cpufreq_frequency_table_cpuinfo(policy, s5pv210_freq_table); +} + +static struct cpufreq_driver s5pv210_driver = { + .flags = CPUFREQ_STICKY, + .verify = s5pv210_verify_speed, + .target = s5pv210_target, + .get = s5pv210_getspeed, + .init = s5pv210_cpu_init, + .name = "s5pv210", +#ifdef CONFIG_PM + .suspend = s5pv210_cpufreq_suspend, + .resume = s5pv210_cpufreq_resume, +#endif +}; + +static int __init s5pv210_cpufreq_init(void) +{ + return cpufreq_register_driver(&s5pv210_driver); +} + +late_initcall(s5pv210_cpufreq_init); diff --git a/arch/arm/mach-s5pv210/dev-audio.c b/arch/arm/mach-s5pv210/dev-audio.c index 21dc6cf955c..1303fcb12b5 100644 --- a/arch/arm/mach-s5pv210/dev-audio.c +++ b/arch/arm/mach-s5pv210/dev-audio.c @@ -24,29 +24,15 @@ static int s5pv210_cfg_i2s(struct platform_device *pdev) /* configure GPIO for i2s port */ switch (pdev->id) { case 1: - s3c_gpio_cfgpin(S5PV210_GPC0(0), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPC0(1), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPC0(2), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPC0(3), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPC0(4), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin_range(S5PV210_GPC0(0), 5, S3C_GPIO_SFN(2)); break; case 2: - s3c_gpio_cfgpin(S5PV210_GPC1(0), S3C_GPIO_SFN(4)); - s3c_gpio_cfgpin(S5PV210_GPC1(1), S3C_GPIO_SFN(4)); - s3c_gpio_cfgpin(S5PV210_GPC1(2), S3C_GPIO_SFN(4)); - s3c_gpio_cfgpin(S5PV210_GPC1(3), S3C_GPIO_SFN(4)); - s3c_gpio_cfgpin(S5PV210_GPC1(4), S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin_range(S5PV210_GPC1(0), 5, S3C_GPIO_SFN(4)); break; case -1: - s3c_gpio_cfgpin(S5PV210_GPI(0), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPI(1), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPI(2), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPI(3), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPI(4), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPI(5), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPI(6), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin_range(S5PV210_GPI(0), 7, S3C_GPIO_SFN(2)); break; default: @@ -151,25 +137,13 @@ static int s5pv210_pcm_cfg_gpio(struct platform_device *pdev) { switch (pdev->id) { case 0: - s3c_gpio_cfgpin(S5PV210_GPI(0), S3C_GPIO_SFN(3)); - s3c_gpio_cfgpin(S5PV210_GPI(1), S3C_GPIO_SFN(3)); - s3c_gpio_cfgpin(S5PV210_GPI(2), S3C_GPIO_SFN(3)); - s3c_gpio_cfgpin(S5PV210_GPI(3), S3C_GPIO_SFN(3)); - s3c_gpio_cfgpin(S5PV210_GPI(4), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin_range(S5PV210_GPI(0), 5, S3C_GPIO_SFN(3)); break; case 1: - s3c_gpio_cfgpin(S5PV210_GPC0(0), S3C_GPIO_SFN(3)); - s3c_gpio_cfgpin(S5PV210_GPC0(1), S3C_GPIO_SFN(3)); - s3c_gpio_cfgpin(S5PV210_GPC0(2), S3C_GPIO_SFN(3)); - s3c_gpio_cfgpin(S5PV210_GPC0(3), S3C_GPIO_SFN(3)); - s3c_gpio_cfgpin(S5PV210_GPC0(4), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin_range(S5PV210_GPC0(0), 5, S3C_GPIO_SFN(3)); break; case 2: - s3c_gpio_cfgpin(S5PV210_GPC1(0), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPC1(1), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPC1(2), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPC1(3), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPC1(4), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin_range(S5PV210_GPC1(0), 5, S3C_GPIO_SFN(2)); break; default: printk(KERN_DEBUG "Invalid PCM Controller number!"); @@ -271,13 +245,7 @@ struct platform_device s5pv210_device_pcm2 = { static int s5pv210_ac97_cfg_gpio(struct platform_device *pdev) { - s3c_gpio_cfgpin(S5PV210_GPC0(0), S3C_GPIO_SFN(4)); - s3c_gpio_cfgpin(S5PV210_GPC0(1), S3C_GPIO_SFN(4)); - s3c_gpio_cfgpin(S5PV210_GPC0(2), S3C_GPIO_SFN(4)); - s3c_gpio_cfgpin(S5PV210_GPC0(3), S3C_GPIO_SFN(4)); - s3c_gpio_cfgpin(S5PV210_GPC0(4), S3C_GPIO_SFN(4)); - - return 0; + return s3c_gpio_cfgpin_range(S5PV210_GPC0(0), 5, S3C_GPIO_SFN(4)); } static struct resource s5pv210_ac97_resource[] = { @@ -325,3 +293,43 @@ struct platform_device s5pv210_device_ac97 = { .coherent_dma_mask = DMA_BIT_MASK(32), }, }; + +/* S/PDIF Controller platform_device */ + +static int s5pv210_spdif_cfg_gpio(struct platform_device *pdev) +{ + s3c_gpio_cfgpin_range(S5PV210_GPC1(0), 2, S3C_GPIO_SFN(3)); + + return 0; +} + +static struct resource s5pv210_spdif_resource[] = { + [0] = { + .start = S5PV210_PA_SPDIF, + .end = S5PV210_PA_SPDIF + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_SPDIF, + .end = DMACH_SPDIF, + .flags = IORESOURCE_DMA, + }, +}; + +static struct s3c_audio_pdata samsung_spdif_pdata = { + .cfg_gpio = s5pv210_spdif_cfg_gpio, +}; + +static u64 s5pv210_spdif_dmamask = DMA_BIT_MASK(32); + +struct platform_device s5pv210_device_spdif = { + .name = "samsung-spdif", + .id = -1, + .num_resources = ARRAY_SIZE(s5pv210_spdif_resource), + .resource = s5pv210_spdif_resource, + .dev = { + .platform_data = &samsung_spdif_pdata, + .dma_mask = &s5pv210_spdif_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; diff --git a/arch/arm/mach-s5pv210/dev-spi.c b/arch/arm/mach-s5pv210/dev-spi.c index 826cdbc43e2..e3249a47e3b 100644 --- a/arch/arm/mach-s5pv210/dev-spi.c +++ b/arch/arm/mach-s5pv210/dev-spi.c @@ -35,23 +35,15 @@ static char *spi_src_clks[] = { */ static int s5pv210_spi_cfg_gpio(struct platform_device *pdev) { + unsigned int base; + switch (pdev->id) { case 0: - s3c_gpio_cfgpin(S5PV210_GPB(0), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPB(1), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPB(2), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV210_GPB(0), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5PV210_GPB(1), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5PV210_GPB(2), S3C_GPIO_PULL_UP); + base = S5PV210_GPB(0); break; case 1: - s3c_gpio_cfgpin(S5PV210_GPB(4), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPB(5), S3C_GPIO_SFN(2)); - s3c_gpio_cfgpin(S5PV210_GPB(6), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV210_GPB(4), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5PV210_GPB(5), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S5PV210_GPB(6), S3C_GPIO_PULL_UP); + base = S5PV210_GPB(4); break; default: @@ -59,6 +51,9 @@ static int s5pv210_spi_cfg_gpio(struct platform_device *pdev) return -EINVAL; } + s3c_gpio_cfgall_range(base, 3, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); + return 0; } diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c index 778ad5fe231..497d3439a14 100644 --- a/arch/arm/mach-s5pv210/dma.c +++ b/arch/arm/mach-s5pv210/dma.c @@ -82,7 +82,7 @@ static struct s3c_pl330_platdata s5pv210_pdma0_pdata = { static struct platform_device s5pv210_device_pdma0 = { .name = "s3c-pl330", - .id = 1, + .id = 0, .num_resources = ARRAY_SIZE(s5pv210_pdma0_resource), .resource = s5pv210_pdma0_resource, .dev = { @@ -144,7 +144,7 @@ static struct s3c_pl330_platdata s5pv210_pdma1_pdata = { static struct platform_device s5pv210_device_pdma1 = { .name = "s3c-pl330", - .id = 2, + .id = 1, .num_resources = ARRAY_SIZE(s5pv210_pdma1_resource), .resource = s5pv210_pdma1_resource, .dev = { diff --git a/arch/arm/mach-s5pv210/gpiolib.c b/arch/arm/mach-s5pv210/gpiolib.c index 0d459112d03..ab673effd76 100644 --- a/arch/arm/mach-s5pv210/gpiolib.c +++ b/arch/arm/mach-s5pv210/gpiolib.c @@ -150,6 +150,7 @@ static struct s3c_gpio_chip s5pv210_gpio_4bit[] = { .label = "GPG3", }, }, { + .config = &gpio_cfg_noint, .chip = { .base = S5PV210_GPI(0), .ngpio = S5PV210_GPIO_I_NR, @@ -223,34 +224,42 @@ static struct s3c_gpio_chip s5pv210_gpio_4bit[] = { }, { .base = (S5P_VA_GPIO + 0xC00), .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(0), .chip = { .base = S5PV210_GPH0(0), .ngpio = S5PV210_GPIO_H0_NR, .label = "GPH0", + .to_irq = samsung_gpiolib_to_irq, }, }, { .base = (S5P_VA_GPIO + 0xC20), .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(8), .chip = { .base = S5PV210_GPH1(0), .ngpio = S5PV210_GPIO_H1_NR, .label = "GPH1", + .to_irq = samsung_gpiolib_to_irq, }, }, { .base = (S5P_VA_GPIO + 0xC40), .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(16), .chip = { .base = S5PV210_GPH2(0), .ngpio = S5PV210_GPIO_H2_NR, .label = "GPH2", + .to_irq = samsung_gpiolib_to_irq, }, }, { .base = (S5P_VA_GPIO + 0xC60), .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(24), .chip = { .base = S5PV210_GPH3(0), .ngpio = S5PV210_GPIO_H3_NR, .label = "GPH3", + .to_irq = samsung_gpiolib_to_irq, }, }, }; @@ -259,11 +268,14 @@ static __init int s5pv210_gpiolib_init(void) { struct s3c_gpio_chip *chip = s5pv210_gpio_4bit; int nr_chips = ARRAY_SIZE(s5pv210_gpio_4bit); + int gpioint_group = 0; int i = 0; for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) + if (chip->config == NULL) { chip->config = &gpio_cfg; + chip->group = gpioint_group++; + } if (chip->base == NULL) chip->base = S5PV210_BANK_BASE(i); } diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h index e1c020e5a49..119b95fdc3c 100644 --- a/arch/arm/mach-s5pv210/include/mach/irqs.h +++ b/arch/arm/mach-s5pv210/include/mach/irqs.h @@ -55,8 +55,8 @@ #define IRQ_SPI1 S5P_IRQ_VIC1(16) #define IRQ_SPI2 S5P_IRQ_VIC1(17) #define IRQ_IRDA S5P_IRQ_VIC1(18) -#define IRQ_CAN0 S5P_IRQ_VIC1(19) -#define IRQ_CAN1 S5P_IRQ_VIC1(20) +#define IRQ_IIC2 S5P_IRQ_VIC1(19) +#define IRQ_IIC3 S5P_IRQ_VIC1(20) #define IRQ_HSIRX S5P_IRQ_VIC1(21) #define IRQ_HSITX S5P_IRQ_VIC1(22) #define IRQ_UHOST S5P_IRQ_VIC1(23) @@ -109,7 +109,7 @@ #define IRQ_IPC S5P_IRQ_VIC3(0) #define IRQ_HOSTIF S5P_IRQ_VIC3(1) -#define IRQ_MMC3 S5P_IRQ_VIC3(2) +#define IRQ_HSMMC3 S5P_IRQ_VIC3(2) #define IRQ_CEC S5P_IRQ_VIC3(3) #define IRQ_TSI S5P_IRQ_VIC3(4) #define IRQ_MDNIE0 S5P_IRQ_VIC3(5) @@ -121,8 +121,12 @@ #define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0)) #define S5P_EINT_BASE2 (IRQ_VIC_END + 1) +/* GPIO interrupt */ +#define S5P_GPIOINT_BASE (IRQ_EINT(31) + 1) +#define S5P_GPIOINT_GROUP_MAXNR 22 + /* Set the default NR_IRQS */ -#define NR_IRQS (IRQ_EINT(31) + 1) +#define NR_IRQS (IRQ_EINT(31) + S5P_GPIOINT_COUNT + 1) /* Compatibility */ #define IRQ_LCD_FIFO IRQ_LCD0 diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h index bd9afd52466..861d7fe11fc 100644 --- a/arch/arm/mach-s5pv210/include/mach/map.h +++ b/arch/arm/mach-s5pv210/include/mach/map.h @@ -57,6 +57,8 @@ #define S5P_SZ_UART SZ_256 +#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET)) + #define S5PV210_PA_SROMC (0xE8000000) #define S5PV210_PA_CFCON (0xE8200000) @@ -73,6 +75,9 @@ #define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000)) +#define S5PV210_PA_HSOTG (0xEC000000) +#define S5PV210_PA_HSPHY (0xEC100000) + #define S5PV210_PA_VIC0 (0xF2000000) #define S5PV210_PA_VIC1 (0xF2100000) #define S5PV210_PA_VIC2 (0xF2200000) @@ -81,6 +86,9 @@ #define S5PV210_PA_SDRAM (0x20000000) #define S5P_PA_SDRAM S5PV210_PA_SDRAM +/* S/PDIF */ +#define S5PV210_PA_SPDIF 0xE1100000 + /* I2S */ #define S5PV210_PA_IIS0 0xEEE30000 #define S5PV210_PA_IIS1 0xE2100000 @@ -96,6 +104,9 @@ #define S5PV210_PA_ADC (0xE1700000) +#define S5PV210_PA_DMC0 (0xF0000000) +#define S5PV210_PA_DMC1 (0xF1400000) + /* compatibiltiy defines. */ #define S3C_PA_UART S5PV210_PA_UART #define S3C_PA_HSMMC0 S5PV210_PA_HSMMC(0) @@ -108,6 +119,7 @@ #define S3C_PA_FB S5PV210_PA_FB #define S3C_PA_RTC S5PV210_PA_RTC #define S3C_PA_WDT S5PV210_PA_WATCHDOG +#define S3C_PA_USB_HSOTG S5PV210_PA_HSOTG #define S5P_PA_FIMC0 S5PV210_PA_FIMC0 #define S5P_PA_FIMC1 S5PV210_PA_FIMC1 #define S5P_PA_FIMC2 S5PV210_PA_FIMC2 diff --git a/arch/arm/mach-s5pv210/include/mach/pm-core.h b/arch/arm/mach-s5pv210/include/mach/pm-core.h new file mode 100644 index 00000000000..e8d394f8b05 --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/pm-core.h @@ -0,0 +1,43 @@ +/* linux/arch/arm/mach-s5pv210/include/mach/pm-core.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Based on arch/arm/mach-s3c2410/include/mach/pm-core.h, + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S5PV210 - PM core support for arch/arm/plat-s5p/pm.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +static inline void s3c_pm_debug_init_uart(void) +{ + /* nothing here yet */ +} + +static inline void s3c_pm_arch_prepare_irqs(void) +{ + __raw_writel(s3c_irqwake_intmask, S5P_WAKEUP_MASK); + __raw_writel(s3c_irqwake_eintmask, S5P_EINT_WAKEUP_MASK); +} + +static inline void s3c_pm_arch_stop_clocks(void) +{ + /* nothing here yet */ +} + +static inline void s3c_pm_arch_show_resume_irqs(void) +{ + /* nothing here yet */ +} + +static inline void s3c_pm_arch_update_uart(void __iomem *regs, + struct pm_uart_save *save) +{ + /* nothing here yet */ +} diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h index 499aef73747..ebaabe021af 100644 --- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h +++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h @@ -25,6 +25,7 @@ #define S5P_APLL_CON S5P_CLKREG(0x100) #define S5P_MPLL_CON S5P_CLKREG(0x108) #define S5P_EPLL_CON S5P_CLKREG(0x110) +#define S5P_EPLL_CON1 S5P_CLKREG(0x114) #define S5P_VPLL_CON S5P_CLKREG(0x120) #define S5P_CLK_SRC0 S5P_CLKREG(0x200) @@ -67,11 +68,28 @@ #define S5P_CLKGATE_BUS1 S5P_CLKREG(0x488) #define S5P_CLK_OUT S5P_CLKREG(0x500) +/* DIV/MUX STATUS */ +#define S5P_CLKDIV_STAT0 S5P_CLKREG(0x1000) +#define S5P_CLKDIV_STAT1 S5P_CLKREG(0x1004) +#define S5P_CLKMUX_STAT0 S5P_CLKREG(0x1100) +#define S5P_CLKMUX_STAT1 S5P_CLKREG(0x1104) + /* CLKSRC0 */ -#define S5P_CLKSRC0_MUX200_MASK (0x1<<16) +#define S5P_CLKSRC0_MUX200_SHIFT (16) +#define S5P_CLKSRC0_MUX200_MASK (0x1 << S5P_CLKSRC0_MUX200_SHIFT) #define S5P_CLKSRC0_MUX166_MASK (0x1<<20) #define S5P_CLKSRC0_MUX133_MASK (0x1<<24) +/* CLKSRC2 */ +#define S5P_CLKSRC2_G3D_SHIFT (0) +#define S5P_CLKSRC2_G3D_MASK (0x3 << S5P_CLKSRC2_G3D_SHIFT) +#define S5P_CLKSRC2_MFC_SHIFT (4) +#define S5P_CLKSRC2_MFC_MASK (0x3 << S5P_CLKSRC2_MFC_SHIFT) + +/* CLKSRC6*/ +#define S5P_CLKSRC6_ONEDRAM_SHIFT (24) +#define S5P_CLKSRC6_ONEDRAM_MASK (0x3 << S5P_CLKSRC6_ONEDRAM_SHIFT) + /* CLKDIV0 */ #define S5P_CLKDIV0_APLL_SHIFT (0) #define S5P_CLKDIV0_APLL_MASK (0x7 << S5P_CLKDIV0_APLL_SHIFT) @@ -90,12 +108,24 @@ #define S5P_CLKDIV0_PCLK66_SHIFT (28) #define S5P_CLKDIV0_PCLK66_MASK (0x7 << S5P_CLKDIV0_PCLK66_SHIFT) +/* CLKDIV2 */ +#define S5P_CLKDIV2_G3D_SHIFT (0) +#define S5P_CLKDIV2_G3D_MASK (0xF << S5P_CLKDIV2_G3D_SHIFT) +#define S5P_CLKDIV2_MFC_SHIFT (4) +#define S5P_CLKDIV2_MFC_MASK (0xF << S5P_CLKDIV2_MFC_SHIFT) + +/* CLKDIV6 */ +#define S5P_CLKDIV6_ONEDRAM_SHIFT (28) +#define S5P_CLKDIV6_ONEDRAM_MASK (0xF << S5P_CLKDIV6_ONEDRAM_SHIFT) + #define S5P_SWRESET S5P_CLKREG(0x2000) +#define S5P_ARM_MCS_CON S5P_CLKREG(0x6100) + /* Registers related to power management */ #define S5P_PWR_CFG S5P_CLKREG(0xC000) #define S5P_EINT_WAKEUP_MASK S5P_CLKREG(0xC004) -#define S5P_WAKEUP_MASK S5P_CLKREG(0xC008) +#define S5P_WAKEUP_MASK S5P_CLKREG(0xC008) #define S5P_PWR_MODE S5P_CLKREG(0xC00C) #define S5P_NORMAL_CFG S5P_CLKREG(0xC010) #define S5P_IDLE_CFG S5P_CLKREG(0xC020) @@ -159,8 +189,11 @@ #define S5P_SLEEP_CFG_USBOSC_EN (1 << 1) /* OTHERS Resgister */ +#define S5P_OTHERS_RET_IO (1 << 31) +#define S5P_OTHERS_RET_CF (1 << 30) +#define S5P_OTHERS_RET_MMC (1 << 29) +#define S5P_OTHERS_RET_UART (1 << 28) #define S5P_OTHERS_USB_SIG_MASK (1 << 16) -#define S5P_OTHERS_MIPI_DPHY_EN (1 << 28) /* MIPI */ #define S5P_MIPI_DPHY_EN (3) diff --git a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h index 49e029b4978..de0c8997607 100644 --- a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h +++ b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h @@ -31,13 +31,6 @@ #define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7)) -/* values for S5P_EXTINT0 */ -#define S5P_EXTINT_LOWLEV (0x00) -#define S5P_EXTINT_HILEV (0x01) -#define S5P_EXTINT_FALLEDGE (0x02) -#define S5P_EXTINT_RISEEDGE (0x03) -#define S5P_EXTINT_BOTHEDGE (0x04) - #define EINT_MODE S3C_GPIO_SFN(0xf) #define EINT_GPIO_0(x) S5PV210_GPH0(x) diff --git a/arch/arm/mach-s5pv210/include/mach/regs-sys.h b/arch/arm/mach-s5pv210/include/mach/regs-sys.h new file mode 100644 index 00000000000..26691d39d0f --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/regs-sys.h @@ -0,0 +1,19 @@ +/* arch/arm/mach-s5pv210/include/mach/regs-sys.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV210 - System registers definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S5PV210_USB_PHY_CON (S3C_VA_SYS + 0xE80C) +#define S5PV210_USB_PHY0_EN (1 << 0) +#define S5PV210_USB_PHY1_EN (1 << 1) + +/* compatibility defines for s3c-hsotg driver */ +#define S3C64XX_OTHERS S5PV210_USB_PHY_CON +#define S3C64XX_OTHERS_USBMASK S5PV210_USB_PHY0_EN diff --git a/arch/arm/mach-s5pv210/include/mach/vmalloc.h b/arch/arm/mach-s5pv210/include/mach/vmalloc.h index df9a2880832..a6c659d68a5 100644 --- a/arch/arm/mach-s5pv210/include/mach/vmalloc.h +++ b/arch/arm/mach-s5pv210/include/mach/vmalloc.h @@ -17,6 +17,6 @@ #ifndef __ASM_ARCH_VMALLOC_H #define __ASM_ARCH_VMALLOC_H __FILE__ -#define VMALLOC_END (0xE0000000UL) +#define VMALLOC_END 0xF6000000UL #endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index 00883087363..28677caf361 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -16,6 +16,8 @@ #include <linux/i2c.h> #include <linux/i2c-gpio.h> #include <linux/mfd/max8998.h> +#include <linux/mfd/wm8994/pdata.h> +#include <linux/regulator/fixed.h> #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/gpio.h> @@ -379,6 +381,119 @@ static struct max8998_platform_data aquila_max8998_pdata = { }; #endif +static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = { + { + .dev_name = "5-001a", + .supply = "DBVDD", + }, { + .dev_name = "5-001a", + .supply = "AVDD2", + }, { + .dev_name = "5-001a", + .supply = "CPVDD", + }, +}; + +static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = { + { + .dev_name = "5-001a", + .supply = "SPKVDD1", + }, { + .dev_name = "5-001a", + .supply = "SPKVDD2", + }, +}; + +static struct regulator_init_data wm8994_fixed_voltage0_init_data = { + .constraints = { + .always_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage0_supplies), + .consumer_supplies = wm8994_fixed_voltage0_supplies, +}; + +static struct regulator_init_data wm8994_fixed_voltage1_init_data = { + .constraints = { + .always_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage1_supplies), + .consumer_supplies = wm8994_fixed_voltage1_supplies, +}; + +static struct fixed_voltage_config wm8994_fixed_voltage0_config = { + .supply_name = "VCC_1.8V_PDA", + .microvolts = 1800000, + .gpio = -EINVAL, + .init_data = &wm8994_fixed_voltage0_init_data, +}; + +static struct fixed_voltage_config wm8994_fixed_voltage1_config = { + .supply_name = "V_BAT", + .microvolts = 3700000, + .gpio = -EINVAL, + .init_data = &wm8994_fixed_voltage1_init_data, +}; + +static struct platform_device wm8994_fixed_voltage0 = { + .name = "reg-fixed-voltage", + .id = 0, + .dev = { + .platform_data = &wm8994_fixed_voltage0_config, + }, +}; + +static struct platform_device wm8994_fixed_voltage1 = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &wm8994_fixed_voltage1_config, + }, +}; + +static struct regulator_consumer_supply wm8994_avdd1_supply = { + .dev_name = "5-001a", + .supply = "AVDD1", +}; + +static struct regulator_consumer_supply wm8994_dcvdd_supply = { + .dev_name = "5-001a", + .supply = "DCVDD", +}; + +static struct regulator_init_data wm8994_ldo1_data = { + .constraints = { + .name = "AVDD1_3.0V", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &wm8994_avdd1_supply, +}; + +static struct regulator_init_data wm8994_ldo2_data = { + .constraints = { + .name = "DCVDD_1.0V", + }, + .num_consumer_supplies = 1, + .consumer_supplies = &wm8994_dcvdd_supply, +}; + +static struct wm8994_pdata wm8994_platform_data = { + /* configure gpio1 function: 0x0001(Logic level input/output) */ + .gpio_defaults[0] = 0x0001, + /* configure gpio3/4/5/7 function for AIF2 voice */ + .gpio_defaults[2] = 0x8100, + .gpio_defaults[3] = 0x8100, + .gpio_defaults[4] = 0x8100, + .gpio_defaults[6] = 0x0100, + /* configure gpio8/9/10/11 function for AIF3 BT */ + .gpio_defaults[7] = 0x8100, + .gpio_defaults[8] = 0x0100, + .gpio_defaults[9] = 0x0100, + .gpio_defaults[10] = 0x0100, + .ldo[0] = { S5PV210_MP03(6), NULL, &wm8994_ldo1_data }, /* XM0FRNB_2 */ + .ldo[1] = { 0, NULL, &wm8994_ldo2_data }, +}; + /* GPIO I2C PMIC */ #define AP_I2C_GPIO_PMIC_BUS_4 4 static struct i2c_gpio_platform_data aquila_i2c_gpio_pmic_data = { @@ -404,6 +519,29 @@ static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = { #endif }; +/* GPIO I2C AP 1.8V */ +#define AP_I2C_GPIO_BUS_5 5 +static struct i2c_gpio_platform_data aquila_i2c_gpio5_data = { + .sda_pin = S5PV210_MP05(3), /* XM0ADDR_11 */ + .scl_pin = S5PV210_MP05(2), /* XM0ADDR_10 */ +}; + +static struct platform_device aquila_i2c_gpio5 = { + .name = "i2c-gpio", + .id = AP_I2C_GPIO_BUS_5, + .dev = { + .platform_data = &aquila_i2c_gpio5_data, + }, +}; + +static struct i2c_board_info i2c_gpio5_devs[] __initdata = { + { + /* CS/ADDR = low 0x34 (FYI: high = 0x36) */ + I2C_BOARD_INFO("wm8994", 0x1a), + .platform_data = &wm8994_platform_data, + }, +}; + /* PMIC Power button */ static struct gpio_keys_button aquila_gpio_keys_table[] = { { @@ -475,6 +613,7 @@ static void aquila_setup_sdhci(void) static struct platform_device *aquila_devices[] __initdata = { &aquila_i2c_gpio_pmic, + &aquila_i2c_gpio5, &aquila_device_gpiokeys, &s3c_device_fb, &s5p_device_onenand, @@ -484,8 +623,33 @@ static struct platform_device *aquila_devices[] __initdata = { &s5p_device_fimc0, &s5p_device_fimc1, &s5p_device_fimc2, + &s5pv210_device_iis0, + &wm8994_fixed_voltage0, + &wm8994_fixed_voltage1, }; +static void __init aquila_sound_init(void) +{ + unsigned int gpio; + + /* CODEC_XTAL_EN + * + * The Aquila board have a oscillator which provide main clock + * to WM8994 codec. The oscillator provide 24MHz clock to WM8994 + * clock. Set gpio setting of "CODEC_XTAL_EN" to enable a oscillator. + * */ + gpio = S5PV210_GPH3(2); /* XEINT_26 */ + gpio_request(gpio, "CODEC_XTAL_EN"); + s3c_gpio_cfgpin(gpio, S3C_GPIO_OUTPUT); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + + /* Ths main clock of WM8994 codec uses the output of CLKOUT pin. + * The CLKOUT[9:8] set to 0x3(XUSBXTI) of 0xE010E000(OTHERS) + * because it needs 24MHz clock to operate WM8994 codec. + */ + __raw_writel(__raw_readl(S5P_OTHERS) | (0x3 << 8), S5P_OTHERS); +} + static void __init aquila_map_io(void) { s5p_init_io(NULL, 0, S5P_VA_CHIPID); @@ -506,6 +670,11 @@ static void __init aquila_machine_init(void) s3c_fimc_setname(1, "s5p-fimc"); s3c_fimc_setname(2, "s5p-fimc"); + /* SOUND */ + aquila_sound_init(); + i2c_register_board_info(AP_I2C_GPIO_BUS_5, i2c_gpio5_devs, + ARRAY_SIZE(i2c_gpio5_devs)); + /* FB */ s3c_fb_set_platdata(&aquila_lcd_pdata); diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index d9ecf57fc2a..b1dcf964a76 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -15,7 +15,13 @@ #include <linux/fb.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> +#include <linux/i2c/qt602240_ts.h> #include <linux/mfd/max8998.h> +#include <linux/mfd/wm8994/pdata.h> +#include <linux/regulator/fixed.h> +#include <linux/spi/spi.h> +#include <linux/spi/spi_gpio.h> +#include <linux/lcd.h> #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/gpio.h> @@ -35,7 +41,10 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <plat/fb.h> +#include <plat/iic.h> +#include <plat/keypad.h> #include <plat/sdhci.h> +#include <plat/clock.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define GONI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -87,13 +96,12 @@ static struct s3c2410_uartcfg goni_uartcfgs[] __initdata = { /* Frame Buffer */ static struct s3c_fb_pd_win goni_fb_win0 = { .win_mode = { - .pixclock = 1000000000000ULL / ((16+16+2+480)*(28+3+2+800)*55), .left_margin = 16, .right_margin = 16, - .upper_margin = 3, + .upper_margin = 2, .lower_margin = 28, .hsync_len = 2, - .vsync_len = 2, + .vsync_len = 1, .xres = 480, .yres = 800, .refresh = 55, @@ -111,9 +119,160 @@ static struct s3c_fb_platdata goni_lcd_pdata __initdata = { .setup_gpio = s5pv210_fb_gpio_setup_24bpp, }; +static int lcd_power_on(struct lcd_device *ld, int enable) +{ + return 1; +} + +static int reset_lcd(struct lcd_device *ld) +{ + static unsigned int first = 1; + int reset_gpio = -1; + + reset_gpio = S5PV210_MP05(5); + + if (first) { + gpio_request(reset_gpio, "MLCD_RST"); + first = 0; + } + + gpio_direction_output(reset_gpio, 1); + return 1; +} + +static struct lcd_platform_data goni_lcd_platform_data = { + .reset = reset_lcd, + .power_on = lcd_power_on, + .lcd_enabled = 0, + .reset_delay = 120, /* 120ms */ + .power_on_delay = 25, /* 25ms */ + .power_off_delay = 200, /* 200ms */ +}; + +#define LCD_BUS_NUM 3 +static struct spi_board_info spi_board_info[] __initdata = { + { + .modalias = "s6e63m0", + .platform_data = &goni_lcd_platform_data, + .max_speed_hz = 1200000, + .bus_num = LCD_BUS_NUM, + .chip_select = 0, + .mode = SPI_MODE_3, + .controller_data = (void *)S5PV210_MP01(1), /* DISPLAY_CS */ + }, +}; + +static struct spi_gpio_platform_data lcd_spi_gpio_data = { + .sck = S5PV210_MP04(1), /* DISPLAY_CLK */ + .mosi = S5PV210_MP04(3), /* DISPLAY_SI */ + .miso = SPI_GPIO_NO_MISO, + .num_chipselect = 1, +}; + +static struct platform_device goni_spi_gpio = { + .name = "spi_gpio", + .id = LCD_BUS_NUM, + .dev = { + .parent = &s3c_device_fb.dev, + .platform_data = &lcd_spi_gpio_data, + }, +}; + +/* KEYPAD */ +static uint32_t keymap[] __initdata = { + /* KEY(row, col, keycode) */ + KEY(0, 1, KEY_MENU), /* Send */ + KEY(0, 2, KEY_BACK), /* End */ + KEY(1, 1, KEY_CONFIG), /* Half shot */ + KEY(1, 2, KEY_VOLUMEUP), + KEY(2, 1, KEY_CAMERA), /* Full shot */ + KEY(2, 2, KEY_VOLUMEDOWN), +}; + +static struct matrix_keymap_data keymap_data __initdata = { + .keymap = keymap, + .keymap_size = ARRAY_SIZE(keymap), +}; + +static struct samsung_keypad_platdata keypad_data __initdata = { + .keymap_data = &keymap_data, + .rows = 3, + .cols = 3, +}; + +/* Radio */ +static struct i2c_board_info i2c1_devs[] __initdata = { + { + I2C_BOARD_INFO("si470x", 0x10), + }, +}; + +static void __init goni_radio_init(void) +{ + int gpio; + + gpio = S5PV210_GPJ2(4); /* XMSMDATA_4 */ + gpio_request(gpio, "FM_INT"); + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); + i2c1_devs[0].irq = gpio_to_irq(gpio); + + gpio = S5PV210_GPJ2(5); /* XMSMDATA_5 */ + gpio_request(gpio, "FM_RST"); + gpio_direction_output(gpio, 1); +} + +/* TSP */ +static struct qt602240_platform_data qt602240_platform_data = { + .x_line = 17, + .y_line = 11, + .x_size = 800, + .y_size = 480, + .blen = 0x21, + .threshold = 0x28, + .voltage = 2800000, /* 2.8V */ + .orient = QT602240_DIAGONAL, +}; + +static struct s3c2410_platform_i2c i2c2_data __initdata = { + .flags = 0, + .bus_num = 2, + .slave_addr = 0x10, + .frequency = 400 * 1000, + .sda_delay = 100, +}; + +static struct i2c_board_info i2c2_devs[] __initdata = { + { + I2C_BOARD_INFO("qt602240_ts", 0x4a), + .platform_data = &qt602240_platform_data, + }, +}; + +static void __init goni_tsp_init(void) +{ + int gpio; + + gpio = S5PV210_GPJ1(3); /* XMSMADDR_11 */ + gpio_request(gpio, "TSP_LDO_ON"); + gpio_direction_output(gpio, 1); + gpio_export(gpio, 0); + + gpio = S5PV210_GPJ0(5); /* XMSMADDR_5 */ + gpio_request(gpio, "TSP_INT"); + + s5p_register_gpio_interrupt(gpio); + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); + i2c2_devs[0].irq = gpio_to_irq(gpio); +} + /* MAX8998 regulators */ #if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE) +static struct regulator_consumer_supply goni_ldo5_consumers[] = { + REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"), +}; + static struct regulator_init_data goni_ldo2_data = { .constraints = { .name = "VALIVE_1.1V", @@ -153,6 +312,8 @@ static struct regulator_init_data goni_ldo5_data = { .max_uV = 2800000, .apply_uV = 1, }, + .num_consumer_supplies = ARRAY_SIZE(goni_ldo5_consumers), + .consumer_supplies = goni_ldo5_consumers, }; static struct regulator_init_data goni_ldo6_data = { @@ -360,6 +521,119 @@ static struct max8998_platform_data goni_max8998_pdata = { }; #endif +static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = { + { + .dev_name = "5-001a", + .supply = "DBVDD", + }, { + .dev_name = "5-001a", + .supply = "AVDD2", + }, { + .dev_name = "5-001a", + .supply = "CPVDD", + }, +}; + +static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = { + { + .dev_name = "5-001a", + .supply = "SPKVDD1", + }, { + .dev_name = "5-001a", + .supply = "SPKVDD2", + }, +}; + +static struct regulator_init_data wm8994_fixed_voltage0_init_data = { + .constraints = { + .always_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage0_supplies), + .consumer_supplies = wm8994_fixed_voltage0_supplies, +}; + +static struct regulator_init_data wm8994_fixed_voltage1_init_data = { + .constraints = { + .always_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage1_supplies), + .consumer_supplies = wm8994_fixed_voltage1_supplies, +}; + +static struct fixed_voltage_config wm8994_fixed_voltage0_config = { + .supply_name = "VCC_1.8V_PDA", + .microvolts = 1800000, + .gpio = -EINVAL, + .init_data = &wm8994_fixed_voltage0_init_data, +}; + +static struct fixed_voltage_config wm8994_fixed_voltage1_config = { + .supply_name = "V_BAT", + .microvolts = 3700000, + .gpio = -EINVAL, + .init_data = &wm8994_fixed_voltage1_init_data, +}; + +static struct platform_device wm8994_fixed_voltage0 = { + .name = "reg-fixed-voltage", + .id = 0, + .dev = { + .platform_data = &wm8994_fixed_voltage0_config, + }, +}; + +static struct platform_device wm8994_fixed_voltage1 = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &wm8994_fixed_voltage1_config, + }, +}; + +static struct regulator_consumer_supply wm8994_avdd1_supply = { + .dev_name = "5-001a", + .supply = "AVDD1", +}; + +static struct regulator_consumer_supply wm8994_dcvdd_supply = { + .dev_name = "5-001a", + .supply = "DCVDD", +}; + +static struct regulator_init_data wm8994_ldo1_data = { + .constraints = { + .name = "AVDD1_3.0V", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &wm8994_avdd1_supply, +}; + +static struct regulator_init_data wm8994_ldo2_data = { + .constraints = { + .name = "DCVDD_1.0V", + }, + .num_consumer_supplies = 1, + .consumer_supplies = &wm8994_dcvdd_supply, +}; + +static struct wm8994_pdata wm8994_platform_data = { + /* configure gpio1 function: 0x0001(Logic level input/output) */ + .gpio_defaults[0] = 0x0001, + /* configure gpio3/4/5/7 function for AIF2 voice */ + .gpio_defaults[2] = 0x8100, + .gpio_defaults[3] = 0x8100, + .gpio_defaults[4] = 0x8100, + .gpio_defaults[6] = 0x0100, + /* configure gpio8/9/10/11 function for AIF3 BT */ + .gpio_defaults[7] = 0x8100, + .gpio_defaults[8] = 0x0100, + .gpio_defaults[9] = 0x0100, + .gpio_defaults[10] = 0x0100, + .ldo[0] = { S5PV210_MP03(6), NULL, &wm8994_ldo1_data }, /* XM0FRNB_2 */ + .ldo[1] = { 0, NULL, &wm8994_ldo2_data }, +}; + /* GPIO I2C PMIC */ #define AP_I2C_GPIO_PMIC_BUS_4 4 static struct i2c_gpio_platform_data goni_i2c_gpio_pmic_data = { @@ -385,6 +659,29 @@ static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = { #endif }; +/* GPIO I2C AP 1.8V */ +#define AP_I2C_GPIO_BUS_5 5 +static struct i2c_gpio_platform_data goni_i2c_gpio5_data = { + .sda_pin = S5PV210_MP05(3), /* XM0ADDR_11 */ + .scl_pin = S5PV210_MP05(2), /* XM0ADDR_10 */ +}; + +static struct platform_device goni_i2c_gpio5 = { + .name = "i2c-gpio", + .id = AP_I2C_GPIO_BUS_5, + .dev = { + .platform_data = &goni_i2c_gpio5_data, + }, +}; + +static struct i2c_board_info i2c_gpio5_devs[] __initdata = { + { + /* CS/ADDR = low 0x34 (FYI: high = 0x36) */ + I2C_BOARD_INFO("wm8994", 0x1a), + .platform_data = &wm8994_platform_data, + }, +}; + /* PMIC Power button */ static struct gpio_keys_button goni_gpio_keys_table[] = { { @@ -444,11 +741,37 @@ static struct s3c_sdhci_platdata goni_hsmmc2_data __initdata = { .ext_cd_gpio_invert = 1, }; +static struct regulator_consumer_supply mmc2_supplies[] = { + REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"), +}; + +static struct regulator_init_data mmc2_fixed_voltage_init_data = { + .constraints = { + .name = "V_TF_2.8V", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(mmc2_supplies), + .consumer_supplies = mmc2_supplies, +}; + +static struct fixed_voltage_config mmc2_fixed_voltage_config = { + .supply_name = "EXT_FLASH_EN", + .microvolts = 2800000, + .gpio = GONI_EXT_FLASH_EN, + .enable_high = true, + .init_data = &mmc2_fixed_voltage_init_data, +}; + +static struct platform_device mmc2_fixed_voltage = { + .name = "reg-fixed-voltage", + .id = 2, + .dev = { + .platform_data = &mmc2_fixed_voltage_config, + }, +}; + static void goni_setup_sdhci(void) { - gpio_request(GONI_EXT_FLASH_EN, "FLASH_EN"); - gpio_direction_output(GONI_EXT_FLASH_EN, 1); - s3c_sdhci0_set_platdata(&goni_hsmmc0_data); s3c_sdhci1_set_platdata(&goni_hsmmc1_data); s3c_sdhci2_set_platdata(&goni_hsmmc2_data); @@ -457,7 +780,10 @@ static void goni_setup_sdhci(void) static struct platform_device *goni_devices[] __initdata = { &s3c_device_fb, &s5p_device_onenand, + &goni_spi_gpio, &goni_i2c_gpio_pmic, + &goni_i2c_gpio5, + &mmc2_fixed_voltage, &goni_device_gpiokeys, &s5p_device_fimc0, &s5p_device_fimc1, @@ -465,8 +791,24 @@ static struct platform_device *goni_devices[] __initdata = { &s3c_device_hsmmc0, &s3c_device_hsmmc1, &s3c_device_hsmmc2, + &s5pv210_device_iis0, + &s3c_device_usb_hsotg, + &samsung_device_keypad, + &s3c_device_i2c1, + &s3c_device_i2c2, + &wm8994_fixed_voltage0, + &wm8994_fixed_voltage1, }; +static void __init goni_sound_init(void) +{ + /* Ths main clock of WM8994 codec uses the output of CLKOUT pin. + * The CLKOUT[9:8] set to 0x3(XUSBXTI) of 0xE010E000(OTHERS) + * because it needs 24MHz clock to operate WM8994 codec. + */ + __raw_writel(__raw_readl(S5P_OTHERS) | (0x3 << 8), S5P_OTHERS); +} + static void __init goni_map_io(void) { s5p_init_io(NULL, 0, S5P_VA_CHIPID); @@ -476,6 +818,20 @@ static void __init goni_map_io(void) static void __init goni_machine_init(void) { + /* Radio: call before I2C 1 registeration */ + goni_radio_init(); + + /* I2C1 */ + s3c_i2c1_set_platdata(NULL); + i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); + + /* TSP: call before I2C 2 registeration */ + goni_tsp_init(); + + /* I2C2 */ + s3c_i2c2_set_platdata(&i2c2_data); + i2c_register_board_info(2, i2c2_devs, ARRAY_SIZE(i2c2_devs)); + /* PMIC */ goni_pmic_init(); i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs, @@ -483,9 +839,22 @@ static void __init goni_machine_init(void) /* SDHCI */ goni_setup_sdhci(); + /* SOUND */ + goni_sound_init(); + i2c_register_board_info(AP_I2C_GPIO_BUS_5, i2c_gpio5_devs, + ARRAY_SIZE(i2c_gpio5_devs)); + /* FB */ s3c_fb_set_platdata(&goni_lcd_pdata); + /* SPI */ + spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); + + /* KEYPAD */ + samsung_keypad_set_platdata(&keypad_data); + + clk_xusbxti.rate = 24000000; + platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices)); } diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c index cea9bca79d8..0ad7924fe62 100644 --- a/arch/arm/mach-s5pv210/mach-smdkc110.c +++ b/arch/arm/mach-s5pv210/mach-smdkc110.c @@ -28,6 +28,7 @@ #include <plat/cpu.h> #include <plat/ata.h> #include <plat/iic.h> +#include <plat/pm.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define SMDKC110_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -81,6 +82,7 @@ static struct s3c_ide_platdata smdkc110_ide_pdata __initdata = { static struct platform_device *smdkc110_devices[] __initdata = { &s5pv210_device_iis0, &s5pv210_device_ac97, + &s5pv210_device_spdif, &s3c_device_cfcon, &s3c_device_i2c0, &s3c_device_i2c1, @@ -110,6 +112,8 @@ static void __init smdkc110_map_io(void) static void __init smdkc110_machine_init(void) { + s3c_pm_init(); + s3c_i2c0_set_platdata(NULL); s3c_i2c1_set_platdata(NULL); s3c_i2c2_set_platdata(NULL); diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index 83189ae9da9..bcd7a5d5340 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -31,6 +31,7 @@ #include <plat/ata.h> #include <plat/iic.h> #include <plat/keypad.h> +#include <plat/pm.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define SMDKV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -103,6 +104,7 @@ static struct samsung_keypad_platdata smdkv210_keypad_data __initdata = { static struct platform_device *smdkv210_devices[] __initdata = { &s5pv210_device_iis0, &s5pv210_device_ac97, + &s5pv210_device_spdif, &s3c_device_adc, &s3c_device_cfcon, &s3c_device_hsmmc0, @@ -145,6 +147,8 @@ static void __init smdkv210_map_io(void) static void __init smdkv210_machine_init(void) { + s3c_pm_init(); + samsung_keypad_set_platdata(&smdkv210_keypad_data); s3c24xx_ts_set_platdata(&s3c_ts_platform); diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c new file mode 100644 index 00000000000..043c938806b --- /dev/null +++ b/arch/arm/mach-s5pv210/mach-torbreck.c @@ -0,0 +1,131 @@ +/* linux/arch/arm/mach-s5pv210/mach-torbreck.c + * + * Copyright (c) 2010 aESOP Community + * http://www.aesop.or.kr/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/serial_core.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/setup.h> +#include <asm/mach-types.h> + +#include <mach/map.h> +#include <mach/regs-clock.h> + +#include <plat/regs-serial.h> +#include <plat/s5pv210.h> +#include <plat/devs.h> +#include <plat/cpu.h> +#include <plat/iic.h> + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define TORBRECK_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define TORBRECK_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define TORBRECK_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG4 | \ + S5PV210_UFCON_RXTRIG4) + +static struct s3c2410_uartcfg torbreck_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = TORBRECK_UCON_DEFAULT, + .ulcon = TORBRECK_ULCON_DEFAULT, + .ufcon = TORBRECK_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = TORBRECK_UCON_DEFAULT, + .ulcon = TORBRECK_ULCON_DEFAULT, + .ufcon = TORBRECK_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = TORBRECK_UCON_DEFAULT, + .ulcon = TORBRECK_ULCON_DEFAULT, + .ufcon = TORBRECK_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = TORBRECK_UCON_DEFAULT, + .ulcon = TORBRECK_ULCON_DEFAULT, + .ufcon = TORBRECK_UFCON_DEFAULT, + }, +}; + +static struct platform_device *torbreck_devices[] __initdata = { + &s5pv210_device_iis0, + &s3c_device_cfcon, + &s3c_device_hsmmc0, + &s3c_device_hsmmc1, + &s3c_device_hsmmc2, + &s3c_device_hsmmc3, + &s3c_device_i2c0, + &s3c_device_i2c1, + &s3c_device_i2c2, + &s3c_device_rtc, + &s3c_device_wdt, +}; + +static struct i2c_board_info torbreck_i2c_devs0[] __initdata = { + /* To Be Updated */ +}; + +static struct i2c_board_info torbreck_i2c_devs1[] __initdata = { + /* To Be Updated */ +}; + +static struct i2c_board_info torbreck_i2c_devs2[] __initdata = { + /* To Be Updated */ +}; + +static void __init torbreck_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(24000000); + s3c24xx_init_uarts(torbreck_uartcfgs, ARRAY_SIZE(torbreck_uartcfgs)); +} + +static void __init torbreck_machine_init(void) +{ + s3c_i2c0_set_platdata(NULL); + s3c_i2c1_set_platdata(NULL); + s3c_i2c2_set_platdata(NULL); + i2c_register_board_info(0, torbreck_i2c_devs0, + ARRAY_SIZE(torbreck_i2c_devs0)); + i2c_register_board_info(1, torbreck_i2c_devs1, + ARRAY_SIZE(torbreck_i2c_devs1)); + i2c_register_board_info(2, torbreck_i2c_devs2, + ARRAY_SIZE(torbreck_i2c_devs2)); + + platform_add_devices(torbreck_devices, ARRAY_SIZE(torbreck_devices)); +} + +MACHINE_START(TORBRECK, "TORBRECK") + /* Maintainer: Hyunchul Ko <ghcstop@gmail.com> */ + .boot_params = S5P_PA_SDRAM + 0x100, + .init_irq = s5pv210_init_irq, + .map_io = torbreck_map_io, + .init_machine = torbreck_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c new file mode 100644 index 00000000000..549d7924fd4 --- /dev/null +++ b/arch/arm/mach-s5pv210/pm.c @@ -0,0 +1,166 @@ +/* linux/arch/arm/mach-s5pv210/pm.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5PV210 - Power Management support + * + * Based on arch/arm/mach-s3c2410/pm.c + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/suspend.h> +#include <linux/io.h> + +#include <plat/cpu.h> +#include <plat/pm.h> +#include <plat/regs-timer.h> + +#include <mach/regs-irq.h> +#include <mach/regs-clock.h> + +static struct sleep_save s5pv210_core_save[] = { + /* Clock source */ + SAVE_ITEM(S5P_CLK_SRC0), + SAVE_ITEM(S5P_CLK_SRC1), + SAVE_ITEM(S5P_CLK_SRC2), + SAVE_ITEM(S5P_CLK_SRC3), + SAVE_ITEM(S5P_CLK_SRC4), + SAVE_ITEM(S5P_CLK_SRC5), + SAVE_ITEM(S5P_CLK_SRC6), + + /* Clock source Mask */ + SAVE_ITEM(S5P_CLK_SRC_MASK0), + SAVE_ITEM(S5P_CLK_SRC_MASK1), + + /* Clock Divider */ + SAVE_ITEM(S5P_CLK_DIV0), + SAVE_ITEM(S5P_CLK_DIV1), + SAVE_ITEM(S5P_CLK_DIV2), + SAVE_ITEM(S5P_CLK_DIV3), + SAVE_ITEM(S5P_CLK_DIV4), + SAVE_ITEM(S5P_CLK_DIV5), + SAVE_ITEM(S5P_CLK_DIV6), + SAVE_ITEM(S5P_CLK_DIV7), + + /* Clock Main Gate */ + SAVE_ITEM(S5P_CLKGATE_MAIN0), + SAVE_ITEM(S5P_CLKGATE_MAIN1), + SAVE_ITEM(S5P_CLKGATE_MAIN2), + + /* Clock source Peri Gate */ + SAVE_ITEM(S5P_CLKGATE_PERI0), + SAVE_ITEM(S5P_CLKGATE_PERI1), + + /* Clock source SCLK Gate */ + SAVE_ITEM(S5P_CLKGATE_SCLK0), + SAVE_ITEM(S5P_CLKGATE_SCLK1), + + /* Clock IP Clock gate */ + SAVE_ITEM(S5P_CLKGATE_IP0), + SAVE_ITEM(S5P_CLKGATE_IP1), + SAVE_ITEM(S5P_CLKGATE_IP2), + SAVE_ITEM(S5P_CLKGATE_IP3), + SAVE_ITEM(S5P_CLKGATE_IP4), + + /* Clock Blcok and Bus gate */ + SAVE_ITEM(S5P_CLKGATE_BLOCK), + SAVE_ITEM(S5P_CLKGATE_BUS0), + + /* Clock ETC */ + SAVE_ITEM(S5P_CLK_OUT), + SAVE_ITEM(S5P_MDNIE_SEL), + + /* PWM Register */ + SAVE_ITEM(S3C2410_TCFG0), + SAVE_ITEM(S3C2410_TCFG1), + SAVE_ITEM(S3C64XX_TINT_CSTAT), + SAVE_ITEM(S3C2410_TCON), + SAVE_ITEM(S3C2410_TCNTB(0)), + SAVE_ITEM(S3C2410_TCMPB(0)), + SAVE_ITEM(S3C2410_TCNTO(0)), +}; + +void s5pv210_cpu_suspend(void) +{ + unsigned long tmp; + + /* issue the standby signal into the pm unit. Note, we + * issue a write-buffer drain just in case */ + + tmp = 0; + + asm("b 1f\n\t" + ".align 5\n\t" + "1:\n\t" + "mcr p15, 0, %0, c7, c10, 5\n\t" + "mcr p15, 0, %0, c7, c10, 4\n\t" + "wfi" : : "r" (tmp)); + + /* we should never get past here */ + panic("sleep resumed to originator?"); +} + +static void s5pv210_pm_prepare(void) +{ + unsigned int tmp; + + /* ensure at least INFORM0 has the resume address */ + __raw_writel(virt_to_phys(s3c_cpu_resume), S5P_INFORM0); + + tmp = __raw_readl(S5P_SLEEP_CFG); + tmp &= ~(S5P_SLEEP_CFG_OSC_EN | S5P_SLEEP_CFG_USBOSC_EN); + __raw_writel(tmp, S5P_SLEEP_CFG); + + /* WFI for SLEEP mode configuration by SYSCON */ + tmp = __raw_readl(S5P_PWR_CFG); + tmp &= S5P_CFG_WFI_CLEAN; + tmp |= S5P_CFG_WFI_SLEEP; + __raw_writel(tmp, S5P_PWR_CFG); + + /* SYSCON interrupt handling disable */ + tmp = __raw_readl(S5P_OTHERS); + tmp |= S5P_OTHER_SYSC_INTOFF; + __raw_writel(tmp, S5P_OTHERS); + + s3c_pm_do_save(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save)); +} + +static int s5pv210_pm_add(struct sys_device *sysdev) +{ + pm_cpu_prep = s5pv210_pm_prepare; + pm_cpu_sleep = s5pv210_cpu_suspend; + + return 0; +} + +static int s5pv210_pm_resume(struct sys_device *dev) +{ + u32 tmp; + + tmp = __raw_readl(S5P_OTHERS); + tmp |= (S5P_OTHERS_RET_IO | S5P_OTHERS_RET_CF |\ + S5P_OTHERS_RET_MMC | S5P_OTHERS_RET_UART); + __raw_writel(tmp , S5P_OTHERS); + + s3c_pm_do_restore_core(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save)); + + return 0; +} + +static struct sysdev_driver s5pv210_pm_driver = { + .add = s5pv210_pm_add, + .resume = s5pv210_pm_resume, +}; + +static __init int s5pv210_pm_drvinit(void) +{ + return sysdev_driver_register(&s5pv210_sysclass, &s5pv210_pm_driver); +} +arch_initcall(s5pv210_pm_drvinit); diff --git a/arch/arm/mach-s5pv210/setup-fb-24bpp.c b/arch/arm/mach-s5pv210/setup-fb-24bpp.c index 928cf1f125f..e932ebfac56 100644 --- a/arch/arm/mach-s5pv210/setup-fb-24bpp.c +++ b/arch/arm/mach-s5pv210/setup-fb-24bpp.c @@ -21,33 +21,21 @@ #include <mach/regs-clock.h> #include <plat/gpio-cfg.h> -void s5pv210_fb_gpio_setup_24bpp(void) +static void s5pv210_fb_cfg_gpios(unsigned int base, unsigned int nr) { - unsigned int gpio = 0; - - for (gpio = S5PV210_GPF0(0); gpio <= S5PV210_GPF0(7); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } + s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(2)); - for (gpio = S5PV210_GPF1(0); gpio <= S5PV210_GPF1(7); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } + for (; nr > 0; nr--, base++) + s5p_gpio_set_drvstr(base, S5P_GPIO_DRVSTR_LV4); +} - for (gpio = S5PV210_GPF2(0); gpio <= S5PV210_GPF2(7); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - for (gpio = S5PV210_GPF3(0); gpio <= S5PV210_GPF3(3); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } +void s5pv210_fb_gpio_setup_24bpp(void) +{ + s5pv210_fb_cfg_gpios(S5PV210_GPF0(0), 8); + s5pv210_fb_cfg_gpios(S5PV210_GPF1(0), 8); + s5pv210_fb_cfg_gpios(S5PV210_GPF2(0), 8); + s5pv210_fb_cfg_gpios(S5PV210_GPF3(0), 4); /* Set DISPLAY_CONTROL register for Display path selection. * diff --git a/arch/arm/mach-s5pv210/setup-i2c0.c b/arch/arm/mach-s5pv210/setup-i2c0.c index d38f7cb7e66..0f1cc3a1c1e 100644 --- a/arch/arm/mach-s5pv210/setup-i2c0.c +++ b/arch/arm/mach-s5pv210/setup-i2c0.c @@ -23,8 +23,6 @@ struct platform_device; /* don't need the contents */ void s3c_i2c0_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgpin(S5PV210_GPD1(0), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV210_GPD1(0), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5PV210_GPD1(1), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV210_GPD1(1), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S5PV210_GPD1(0), 2, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s5pv210/setup-i2c1.c b/arch/arm/mach-s5pv210/setup-i2c1.c index 148bb7857d8..f61365a34c5 100644 --- a/arch/arm/mach-s5pv210/setup-i2c1.c +++ b/arch/arm/mach-s5pv210/setup-i2c1.c @@ -23,8 +23,6 @@ struct platform_device; /* don't need the contents */ void s3c_i2c1_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgpin(S5PV210_GPD1(2), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV210_GPD1(2), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5PV210_GPD1(3), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV210_GPD1(3), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S5PV210_GPD1(2), 2, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s5pv210/setup-i2c2.c b/arch/arm/mach-s5pv210/setup-i2c2.c index 2396cb8c373..2f91b5cefbc 100644 --- a/arch/arm/mach-s5pv210/setup-i2c2.c +++ b/arch/arm/mach-s5pv210/setup-i2c2.c @@ -23,8 +23,6 @@ struct platform_device; /* don't need the contents */ void s3c_i2c2_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgpin(S5PV210_GPD1(4), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV210_GPD1(4), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5PV210_GPD1(5), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV210_GPD1(5), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S5PV210_GPD1(4), 2, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s5pv210/setup-ide.c b/arch/arm/mach-s5pv210/setup-ide.c index b558b1cc8d6..ea123d546bd 100644 --- a/arch/arm/mach-s5pv210/setup-ide.c +++ b/arch/arm/mach-s5pv210/setup-ide.c @@ -15,36 +15,25 @@ #include <plat/gpio-cfg.h> +static void s5pv210_ide_cfg_gpios(unsigned int base, unsigned int nr) +{ + s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(4)); + + for (; nr > 0; nr--, base++) + s5p_gpio_set_drvstr(base, S5P_GPIO_DRVSTR_LV4); +} + void s5pv210_ide_setup_gpio(void) { - unsigned int gpio = 0; - - for (gpio = S5PV210_GPJ0(0); gpio <= S5PV210_GPJ0(7); gpio++) { - /* CF_Add[0 - 2], CF_IORDY, CF_INTRQ, CF_DMARQ, CF_DMARST, - CF_DMACK */ - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - - for (gpio = S5PV210_GPJ2(0); gpio <= S5PV210_GPJ2(7); gpio++) { - /*CF_Data[0 - 7] */ - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - - for (gpio = S5PV210_GPJ3(0); gpio <= S5PV210_GPJ3(7); gpio++) { - /* CF_Data[8 - 15] */ - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } - - for (gpio = S5PV210_GPJ4(0); gpio <= S5PV210_GPJ4(3); gpio++) { - /* CF_CS0, CF_CS1, CF_IORD, CF_IOWR */ - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); - } + /* CF_Add[0 - 2], CF_IORDY, CF_INTRQ, CF_DMARQ, CF_DMARST, CF_DMACK */ + s5pv210_ide_cfg_gpios(S5PV210_GPJ0(0), 8); + + /* CF_Data[0 - 7] */ + s5pv210_ide_cfg_gpios(S5PV210_GPJ2(0), 8); + + /* CF_Data[8 - 15] */ + s5pv210_ide_cfg_gpios(S5PV210_GPJ3(0), 8); + + /* CF_CS0, CF_CS1, CF_IORD, CF_IOWR */ + s5pv210_ide_cfg_gpios(S5PV210_GPJ4(0), 4); } diff --git a/arch/arm/mach-s5pv210/setup-keypad.c b/arch/arm/mach-s5pv210/setup-keypad.c index 37b2790aafc..c56420a52f4 100644 --- a/arch/arm/mach-s5pv210/setup-keypad.c +++ b/arch/arm/mach-s5pv210/setup-keypad.c @@ -16,19 +16,9 @@ void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols) { - unsigned int gpio, end; - /* Set all the necessary GPH3 pins to special-function 3: KP_ROW[x] */ - end = S5PV210_GPH3(rows); - for (gpio = S5PV210_GPH3(0); gpio < end; gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + s3c_gpio_cfgrange_nopull(S5PV210_GPH3(0), rows, S3C_GPIO_SFN(3)); /* Set all the necessary GPH2 pins to special-function 3: KP_COL[x] */ - end = S5PV210_GPH2(cols); - for (gpio = S5PV210_GPH2(0); gpio < end; gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + s3c_gpio_cfgrange_nopull(S5PV210_GPH2(0), cols, S3C_GPIO_SFN(3)); } diff --git a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c index b18587b1ec5..746777d56df 100644 --- a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c +++ b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c @@ -26,26 +26,17 @@ void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) { struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - unsigned int gpio; /* Set all the necessary GPG0/GPG1 pins to special-function 2 */ - for (gpio = S5PV210_GPG0(0); gpio < S5PV210_GPG0(2); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + s3c_gpio_cfgrange_nopull(S5PV210_GPG0(0), 2, S3C_GPIO_SFN(2)); + switch (width) { case 8: /* GPG1[3:6] special-funtion 3 */ - for (gpio = S5PV210_GPG1(3); gpio <= S5PV210_GPG1(6); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + s3c_gpio_cfgrange_nopull(S5PV210_GPG1(3), 4, S3C_GPIO_SFN(3)); case 4: /* GPG0[3:6] special-funtion 2 */ - for (gpio = S5PV210_GPG0(3); gpio <= S5PV210_GPG0(6); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + s3c_gpio_cfgrange_nopull(S5PV210_GPG0(3), 4, S3C_GPIO_SFN(2)); default: break; } @@ -59,19 +50,12 @@ void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) { struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - unsigned int gpio; /* Set all the necessary GPG1[0:1] pins to special-function 2 */ - for (gpio = S5PV210_GPG1(0); gpio < S5PV210_GPG1(2); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + s3c_gpio_cfgrange_nopull(S5PV210_GPG1(0), 2, S3C_GPIO_SFN(2)); /* Data pin GPG1[3:6] to special-function 2 */ - for (gpio = S5PV210_GPG1(3); gpio <= S5PV210_GPG1(6); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + s3c_gpio_cfgrange_nopull(S5PV210_GPG1(3), 4, S3C_GPIO_SFN(2)); if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { s3c_gpio_setpull(S5PV210_GPG1(2), S3C_GPIO_PULL_UP); @@ -82,27 +66,17 @@ void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) { struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - unsigned int gpio; /* Set all the necessary GPG2[0:1] pins to special-function 2 */ - for (gpio = S5PV210_GPG2(0); gpio < S5PV210_GPG2(2); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + s3c_gpio_cfgrange_nopull(S5PV210_GPG2(0), 2, S3C_GPIO_SFN(2)); switch (width) { case 8: /* Data pin GPG3[3:6] to special-function 3 */ - for (gpio = S5PV210_GPG3(3); gpio <= S5PV210_GPG3(6); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + s3c_gpio_cfgrange_nopull(S5PV210_GPG3(3), 4, S3C_GPIO_SFN(3)); case 4: /* Data pin GPG2[3:6] to special-function 2 */ - for (gpio = S5PV210_GPG2(3); gpio <= S5PV210_GPG2(6); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + s3c_gpio_cfgrange_nopull(S5PV210_GPG2(3), 4, S3C_GPIO_SFN(2)); default: break; } @@ -116,19 +90,12 @@ void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width) { struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; - unsigned int gpio; - /* Set all the necessary GPG3[0:2] pins to special-function 2 */ - for (gpio = S5PV210_GPG3(0); gpio < S5PV210_GPG3(2); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + /* Set all the necessary GPG3[0:1] pins to special-function 2 */ + s3c_gpio_cfgrange_nopull(S5PV210_GPG3(0), 2, S3C_GPIO_SFN(2)); /* Data pin GPG3[3:6] to special-function 2 */ - for (gpio = S5PV210_GPG3(3); gpio <= S5PV210_GPG3(6); gpio++) { - s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); - s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); - } + s3c_gpio_cfgrange_nopull(S5PV210_GPG3(3), 4, S3C_GPIO_SFN(2)); if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { s3c_gpio_setpull(S5PV210_GPG3(2), S3C_GPIO_PULL_UP); diff --git a/arch/arm/mach-s5pv210/sleep.S b/arch/arm/mach-s5pv210/sleep.S new file mode 100644 index 00000000000..d4d222b716b --- /dev/null +++ b/arch/arm/mach-s5pv210/sleep.S @@ -0,0 +1,170 @@ +/* linux/arch/arm/plat-s5p/sleep.S + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5PV210 power Manager (Suspend-To-RAM) support + * Based on S3C2410 sleep code by: + * Ben Dooks, (c) 2004 Simtec Electronics + * + * Based on PXA/SA1100 sleep code by: + * Nicolas Pitre, (c) 2002 Monta Vista Software Inc + * Cliff Brake, (c) 2001 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/memory.h> + + .text + + /* s3c_cpu_save + * + * entry: + * r0 = save address (virtual addr of s3c_sleep_save_phys) + */ + +ENTRY(s3c_cpu_save) + + stmfd sp!, { r3 - r12, lr } + + mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID + mrc p15, 0, r5, c3, c0, 0 @ Domain ID + mrc p15, 0, r6, c2, c0, 0 @ Translation Table BASE0 + mrc p15, 0, r7, c2, c0, 1 @ Translation Table BASE1 + mrc p15, 0, r8, c2, c0, 2 @ Translation Table Control + mrc p15, 0, r9, c1, c0, 0 @ Control register + mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register + mrc p15, 0, r11, c1, c0, 2 @ Co-processor access controls + mrc p15, 0, r12, c10, c2, 0 @ Read PRRR + mrc p15, 0, r3, c10, c2, 1 @ READ NMRR + + stmia r0, { r3 - r13 } + + bl s3c_pm_cb_flushcache + + ldr r0, =pm_cpu_sleep + ldr r0, [ r0 ] + mov pc, r0 + +resume_with_mmu: + /* + * After MMU is turned on, restore the previous MMU table. + */ + ldr r9 , =(PAGE_OFFSET - PHYS_OFFSET) + add r4, r4, r9 + str r12, [r4] + + ldmfd sp!, { r3 - r12, pc } + + .ltorg + + .data + + .global s3c_sleep_save_phys +s3c_sleep_save_phys: + .word 0 + + /* sleep magic, to allow the bootloader to check for an valid + * image to resume to. Must be the first word before the + * s3c_cpu_resume entry. + */ + + .word 0x2bedf00d + + /* s3c_cpu_resume + * + * resume code entry for bootloader to call + * + * we must put this code here in the data segment as we have no + * other way of restoring the stack pointer after sleep, and we + * must not write to the code segment (code is read-only) + */ + +ENTRY(s3c_cpu_resume) + mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE + msr cpsr_c, r0 + + mov r1, #0 + mcr p15, 0, r1, c8, c7, 0 @ invalidate TLBs + mcr p15, 0, r1, c7, c5, 0 @ invalidate I Cache + + ldr r0, s3c_sleep_save_phys @ address of restore block + ldmia r0, { r3 - r13 } + + mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID + mcr p15, 0, r5, c3, c0, 0 @ Domain ID + + mcr p15, 0, r8, c2, c0, 2 @ Translation Table Control + mcr p15, 0, r7, c2, c0, 1 @ Translation Table BASE1 + mcr p15, 0, r6, c2, c0, 0 @ Translation Table BASE0 + + mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register + + mov r0, #0 + mcr p15, 0, r0, c8, c7, 0 @ Invalidate I & D TLB + + mov r0, #0 @ restore copro access + mcr p15, 0, r11, c1, c0, 2 @ Co-processor access + mcr p15, 0, r0, c7, c5, 4 + + mcr p15, 0, r12, c10, c2, 0 @ write PRRR + mcr p15, 0, r3, c10, c2, 1 @ write NMRR + + /* + * In Cortex-A8, when MMU is turned on, the pipeline is flushed. + * And there are no valid entries in the MMU table at this point. + * So before turning on the MMU, the MMU entry for the DRAM address + * range is added. After the MMU is turned on, the other entries + * in the MMU table will be restored. + */ + + /* r6 = Translation Table BASE0 */ + mov r4, r6 + mov r4, r4, LSR #14 + mov r4, r4, LSL #14 + + /* Load address for adding to MMU table list */ + ldr r11, =0xE010F000 @ INFORM0 reg. + ldr r10, [r11, #0] + mov r10, r10, LSR #18 + bic r10, r10, #0x3 + orr r4, r4, r10 + + /* Calculate MMU table entry */ + mov r10, r10, LSL #18 + ldr r5, =0x40E + orr r10, r10, r5 + + /* Back up originally data */ + ldr r12, [r4] + + /* Add calculated MMU table entry into MMU table list */ + str r10, [r4] + + ldr r2, =resume_with_mmu + mcr p15, 0, r9, c1, c0, 0 @ turn on MMU, etc + + nop + nop + nop + nop + nop @ second-to-last before mmu + + mov pc, r2 @ go back to virtual address + + .ltorg diff --git a/arch/arm/mach-s5pv310/Kconfig b/arch/arm/mach-s5pv310/Kconfig index 331b5bd97ab..1150b360f38 100644 --- a/arch/arm/mach-s5pv310/Kconfig +++ b/arch/arm/mach-s5pv310/Kconfig @@ -11,7 +11,6 @@ if ARCH_S5PV310 config CPU_S5PV310 bool - select PLAT_S5P help Enable S5PV310 CPU support @@ -25,21 +24,105 @@ config S5PV310_SETUP_I2C2 help Common setup code for i2c bus 2. +config S5PV310_SETUP_I2C3 + bool + help + Common setup code for i2c bus 3. + +config S5PV310_SETUP_I2C4 + bool + help + Common setup code for i2c bus 4. + +config S5PV310_SETUP_I2C5 + bool + help + Common setup code for i2c bus 5. + +config S5PV310_SETUP_I2C6 + bool + help + Common setup code for i2c bus 6. + +config S5PV310_SETUP_I2C7 + bool + help + Common setup code for i2c bus 7. + +config S5PV310_SETUP_SDHCI + bool + select S5PV310_SETUP_SDHCI_GPIO + help + Internal helper functions for S5PV310 based SDHCI systems. + +config S5PV310_SETUP_SDHCI_GPIO + bool + help + Common setup code for SDHCI gpio. + # machine support -config MACH_SMDKV310 - bool "SMDKV310" +menu "S5PC210 Machines" + +config MACH_SMDKC210 + bool "SMDKC210" select CPU_S5PV310 - select ARCH_SPARSEMEM_ENABLE + select S3C_DEV_RTC + select S3C_DEV_WDT + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_HSMMC2 + select S3C_DEV_HSMMC3 + select S5PV310_SETUP_SDHCI help - Machine support for Samsung SMDKV310 + Machine support for Samsung SMDKC210 + S5PC210(MCP) is one of package option of S5PV310 config MACH_UNIVERSAL_C210 bool "Mobile UNIVERSAL_C210 Board" select CPU_S5PV310 - select ARCH_SPARSEMEM_ENABLE + select S5P_DEV_ONENAND + select S3C_DEV_I2C1 + select S5PV310_SETUP_I2C1 help Machine support for Samsung Mobile Universal S5PC210 Reference Board. S5PC210(MCP) is one of package option of S5PV310 +endmenu + +menu "S5PV310 Machines" + +config MACH_SMDKV310 + bool "SMDKV310" + select CPU_S5PV310 + select S3C_DEV_RTC + select S3C_DEV_WDT + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_HSMMC2 + select S3C_DEV_HSMMC3 + select S5PV310_SETUP_SDHCI + help + Machine support for Samsung SMDKV310 + +endmenu + +comment "Configuration for HSMMC bus width" + +menu "Use 8-bit bus width" + +config S5PV310_SDHCI_CH0_8BIT + bool "Channel 0 with 8-bit bus" + help + Support HSMMC Channel 0 8-bit bus. + If selected, Channel 1 is disabled. + +config S5PV310_SDHCI_CH2_8BIT + bool "Channel 2 with 8-bit bus" + help + Support HSMMC Channel 2 8-bit bus. + If selected, Channel 3 is disabled. + +endmenu + endif diff --git a/arch/arm/mach-s5pv310/Makefile b/arch/arm/mach-s5pv310/Makefile index d5b51c72340..84afc64e7c0 100644 --- a/arch/arm/mach-s5pv310/Makefile +++ b/arch/arm/mach-s5pv310/Makefile @@ -13,7 +13,7 @@ obj- := # Core support for S5PV310 system obj-$(CONFIG_CPU_S5PV310) += cpu.o init.o clock.o irq-combiner.o -obj-$(CONFIG_CPU_S5PV310) += setup-i2c0.o time.o +obj-$(CONFIG_CPU_S5PV310) += setup-i2c0.o time.o gpiolib.o irq-eint.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o @@ -21,6 +21,7 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o # machine support +obj-$(CONFIG_MACH_SMDKC210) += mach-smdkc210.o obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o @@ -28,3 +29,10 @@ obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o obj-$(CONFIG_S5PV310_SETUP_I2C1) += setup-i2c1.o obj-$(CONFIG_S5PV310_SETUP_I2C2) += setup-i2c2.o +obj-$(CONFIG_S5PV310_SETUP_I2C3) += setup-i2c3.o +obj-$(CONFIG_S5PV310_SETUP_I2C4) += setup-i2c4.o +obj-$(CONFIG_S5PV310_SETUP_I2C5) += setup-i2c5.o +obj-$(CONFIG_S5PV310_SETUP_I2C6) += setup-i2c6.o +obj-$(CONFIG_S5PV310_SETUP_I2C7) += setup-i2c7.o +obj-$(CONFIG_S5PV310_SETUP_SDHCI) += setup-sdhci.o +obj-$(CONFIG_S5PV310_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o diff --git a/arch/arm/mach-s5pv310/clock.c b/arch/arm/mach-s5pv310/clock.c index 26a0f03df8e..58c9d33f36f 100644 --- a/arch/arm/mach-s5pv310/clock.c +++ b/arch/arm/mach-s5pv310/clock.c @@ -30,16 +30,92 @@ static struct clk clk_sclk_hdmi27m = { .rate = 27000000, }; +static struct clk clk_sclk_hdmiphy = { + .name = "sclk_hdmiphy", + .id = -1, +}; + +static struct clk clk_sclk_usbphy0 = { + .name = "sclk_usbphy0", + .id = -1, + .rate = 27000000, +}; + +static struct clk clk_sclk_usbphy1 = { + .name = "sclk_usbphy1", + .id = -1, +}; + +static int s5pv310_clksrc_mask_top_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKSRC_MASK_TOP, clk, enable); +} + +static int s5pv310_clksrc_mask_cam_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKSRC_MASK_CAM, clk, enable); +} + +static int s5pv310_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKSRC_MASK_LCD0, clk, enable); +} + +static int s5pv310_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable); +} + +static int s5pv310_clksrc_mask_fsys_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKSRC_MASK_FSYS, clk, enable); +} + static int s5pv310_clksrc_mask_peril0_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKSRC_MASK_PERIL0, clk, enable); } +static int s5pv310_clksrc_mask_peril1_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKSRC_MASK_PERIL1, clk, enable); +} + +static int s5pv310_clk_ip_cam_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKGATE_IP_CAM, clk, enable); +} + +static int s5pv310_clk_ip_image_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKGATE_IP_IMAGE, clk, enable); +} + +static int s5pv310_clk_ip_lcd0_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKGATE_IP_LCD0, clk, enable); +} + +static int s5pv310_clk_ip_lcd1_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKGATE_IP_LCD1, clk, enable); +} + +static int s5pv310_clk_ip_fsys_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKGATE_IP_FSYS, clk, enable); +} + static int s5pv310_clk_ip_peril_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKGATE_IP_PERIL, clk, enable); } +static int s5pv310_clk_ip_perir_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKGATE_IP_PERIR, clk, enable); +} + /* Core list of CMU_CPU side */ static struct clksrc_clk clk_mout_apll = { @@ -79,7 +155,7 @@ static struct clksrc_clk clk_mout_mpll = { }; static struct clk *clkset_moutcore_list[] = { - [0] = &clk_sclk_apll.clk, + [0] = &clk_mout_apll.clk, [1] = &clk_mout_mpll.clk, }; @@ -150,24 +226,6 @@ static struct clksrc_clk clk_periphclk = { .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 12, .size = 3 }, }; -static struct clksrc_clk clk_atclk = { - .clk = { - .name = "atclk", - .id = -1, - .parent = &clk_moutcore.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 16, .size = 3 }, -}; - -static struct clksrc_clk clk_pclk_dbg = { - .clk = { - .name = "pclk_dbg", - .id = -1, - .parent = &clk_atclk.clk, - }, - .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 20, .size = 3 }, -}; - /* Core list of CMU_CORE side */ static struct clk *clkset_corebus_list[] = { @@ -241,7 +299,7 @@ static struct clk *clkset_aclk_top_list[] = { [1] = &clk_sclk_apll.clk, }; -static struct clksrc_sources clkset_aclk_200 = { +static struct clksrc_sources clkset_aclk = { .sources = clkset_aclk_top_list, .nr_sources = ARRAY_SIZE(clkset_aclk_top_list), }; @@ -251,52 +309,37 @@ static struct clksrc_clk clk_aclk_200 = { .name = "aclk_200", .id = -1, }, - .sources = &clkset_aclk_200, + .sources = &clkset_aclk, .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 12, .size = 1 }, .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 0, .size = 3 }, }; -static struct clksrc_sources clkset_aclk_100 = { - .sources = clkset_aclk_top_list, - .nr_sources = ARRAY_SIZE(clkset_aclk_top_list), -}; - static struct clksrc_clk clk_aclk_100 = { .clk = { .name = "aclk_100", .id = -1, }, - .sources = &clkset_aclk_100, + .sources = &clkset_aclk, .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 16, .size = 1 }, .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 4, .size = 4 }, }; -static struct clksrc_sources clkset_aclk_160 = { - .sources = clkset_aclk_top_list, - .nr_sources = ARRAY_SIZE(clkset_aclk_top_list), -}; - static struct clksrc_clk clk_aclk_160 = { .clk = { .name = "aclk_160", .id = -1, }, - .sources = &clkset_aclk_160, + .sources = &clkset_aclk, .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 20, .size = 1 }, .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 8, .size = 3 }, }; -static struct clksrc_sources clkset_aclk_133 = { - .sources = clkset_aclk_top_list, - .nr_sources = ARRAY_SIZE(clkset_aclk_top_list), -}; - static struct clksrc_clk clk_aclk_133 = { .clk = { .name = "aclk_133", .id = -1, }, - .sources = &clkset_aclk_133, + .sources = &clkset_aclk, .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 24, .size = 1 }, .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 12, .size = 3 }, }; @@ -315,6 +358,8 @@ static struct clksrc_clk clk_vpllsrc = { .clk = { .name = "vpll_src", .id = -1, + .enable = s5pv310_clksrc_mask_top_ctrl, + .ctrlbit = (1 << 0), }, .sources = &clkset_vpllsrc, .reg_src = { .reg = S5P_CLKSRC_TOP1, .shift = 0, .size = 1 }, @@ -346,7 +391,175 @@ static struct clk init_clocks_disable[] = { .parent = &clk_aclk_100.clk, .enable = s5pv310_clk_ip_peril_ctrl, .ctrlbit = (1<<24), - } + }, { + .name = "csis", + .id = 0, + .enable = s5pv310_clk_ip_cam_ctrl, + .ctrlbit = (1 << 4), + }, { + .name = "csis", + .id = 1, + .enable = s5pv310_clk_ip_cam_ctrl, + .ctrlbit = (1 << 5), + }, { + .name = "fimc", + .id = 0, + .enable = s5pv310_clk_ip_cam_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "fimc", + .id = 1, + .enable = s5pv310_clk_ip_cam_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "fimc", + .id = 2, + .enable = s5pv310_clk_ip_cam_ctrl, + .ctrlbit = (1 << 2), + }, { + .name = "fimc", + .id = 3, + .enable = s5pv310_clk_ip_cam_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "fimd", + .id = 0, + .enable = s5pv310_clk_ip_lcd0_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "fimd", + .id = 1, + .enable = s5pv310_clk_ip_lcd1_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "hsmmc", + .id = 0, + .parent = &clk_aclk_133.clk, + .enable = s5pv310_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 5), + }, { + .name = "hsmmc", + .id = 1, + .parent = &clk_aclk_133.clk, + .enable = s5pv310_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 6), + }, { + .name = "hsmmc", + .id = 2, + .parent = &clk_aclk_133.clk, + .enable = s5pv310_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 7), + }, { + .name = "hsmmc", + .id = 3, + .parent = &clk_aclk_133.clk, + .enable = s5pv310_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 8), + }, { + .name = "hsmmc", + .id = 4, + .parent = &clk_aclk_133.clk, + .enable = s5pv310_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 9), + }, { + .name = "sata", + .id = -1, + .enable = s5pv310_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 10), + }, { + .name = "adc", + .id = -1, + .enable = s5pv310_clk_ip_peril_ctrl, + .ctrlbit = (1 << 15), + }, { + .name = "rtc", + .id = -1, + .enable = s5pv310_clk_ip_perir_ctrl, + .ctrlbit = (1 << 15), + }, { + .name = "watchdog", + .id = -1, + .enable = s5pv310_clk_ip_perir_ctrl, + .ctrlbit = (1 << 14), + }, { + .name = "usbhost", + .id = -1, + .enable = s5pv310_clk_ip_fsys_ctrl , + .ctrlbit = (1 << 12), + }, { + .name = "otg", + .id = -1, + .enable = s5pv310_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 13), + }, { + .name = "spi", + .id = 0, + .enable = s5pv310_clk_ip_peril_ctrl, + .ctrlbit = (1 << 16), + }, { + .name = "spi", + .id = 1, + .enable = s5pv310_clk_ip_peril_ctrl, + .ctrlbit = (1 << 17), + }, { + .name = "spi", + .id = 2, + .enable = s5pv310_clk_ip_peril_ctrl, + .ctrlbit = (1 << 18), + }, { + .name = "fimg2d", + .id = -1, + .enable = s5pv310_clk_ip_image_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "i2c", + .id = 0, + .parent = &clk_aclk_100.clk, + .enable = s5pv310_clk_ip_peril_ctrl, + .ctrlbit = (1 << 6), + }, { + .name = "i2c", + .id = 1, + .parent = &clk_aclk_100.clk, + .enable = s5pv310_clk_ip_peril_ctrl, + .ctrlbit = (1 << 7), + }, { + .name = "i2c", + .id = 2, + .parent = &clk_aclk_100.clk, + .enable = s5pv310_clk_ip_peril_ctrl, + .ctrlbit = (1 << 8), + }, { + .name = "i2c", + .id = 3, + .parent = &clk_aclk_100.clk, + .enable = s5pv310_clk_ip_peril_ctrl, + .ctrlbit = (1 << 9), + }, { + .name = "i2c", + .id = 4, + .parent = &clk_aclk_100.clk, + .enable = s5pv310_clk_ip_peril_ctrl, + .ctrlbit = (1 << 10), + }, { + .name = "i2c", + .id = 5, + .parent = &clk_aclk_100.clk, + .enable = s5pv310_clk_ip_peril_ctrl, + .ctrlbit = (1 << 11), + }, { + .name = "i2c", + .id = 6, + .parent = &clk_aclk_100.clk, + .enable = s5pv310_clk_ip_peril_ctrl, + .ctrlbit = (1 << 12), + }, { + .name = "i2c", + .id = 7, + .parent = &clk_aclk_100.clk, + .enable = s5pv310_clk_ip_peril_ctrl, + .ctrlbit = (1 << 13), + }, }; static struct clk init_clocks[] = { @@ -387,6 +600,9 @@ static struct clk *clkset_group_list[] = { [0] = &clk_ext_xtal_mux, [1] = &clk_xusbxti, [2] = &clk_sclk_hdmi27m, + [3] = &clk_sclk_usbphy0, + [4] = &clk_sclk_usbphy1, + [5] = &clk_sclk_hdmiphy, [6] = &clk_mout_mpll.clk, [7] = &clk_mout_epll.clk, [8] = &clk_sclk_vpll.clk, @@ -397,6 +613,104 @@ static struct clksrc_sources clkset_group = { .nr_sources = ARRAY_SIZE(clkset_group_list), }; +static struct clk *clkset_mout_g2d0_list[] = { + [0] = &clk_mout_mpll.clk, + [1] = &clk_sclk_apll.clk, +}; + +static struct clksrc_sources clkset_mout_g2d0 = { + .sources = clkset_mout_g2d0_list, + .nr_sources = ARRAY_SIZE(clkset_mout_g2d0_list), +}; + +static struct clksrc_clk clk_mout_g2d0 = { + .clk = { + .name = "mout_g2d0", + .id = -1, + }, + .sources = &clkset_mout_g2d0, + .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 0, .size = 1 }, +}; + +static struct clk *clkset_mout_g2d1_list[] = { + [0] = &clk_mout_epll.clk, + [1] = &clk_sclk_vpll.clk, +}; + +static struct clksrc_sources clkset_mout_g2d1 = { + .sources = clkset_mout_g2d1_list, + .nr_sources = ARRAY_SIZE(clkset_mout_g2d1_list), +}; + +static struct clksrc_clk clk_mout_g2d1 = { + .clk = { + .name = "mout_g2d1", + .id = -1, + }, + .sources = &clkset_mout_g2d1, + .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 4, .size = 1 }, +}; + +static struct clk *clkset_mout_g2d_list[] = { + [0] = &clk_mout_g2d0.clk, + [1] = &clk_mout_g2d1.clk, +}; + +static struct clksrc_sources clkset_mout_g2d = { + .sources = clkset_mout_g2d_list, + .nr_sources = ARRAY_SIZE(clkset_mout_g2d_list), +}; + +static struct clksrc_clk clk_dout_mmc0 = { + .clk = { + .name = "dout_mmc0", + .id = -1, + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 0, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk clk_dout_mmc1 = { + .clk = { + .name = "dout_mmc1", + .id = -1, + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 4, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk clk_dout_mmc2 = { + .clk = { + .name = "dout_mmc2", + .id = -1, + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 8, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk clk_dout_mmc3 = { + .clk = { + .name = "dout_mmc3", + .id = -1, + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 12, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk clk_dout_mmc4 = { + .clk = { + .name = "dout_mmc4", + .id = -1, + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 16, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_FSYS3, .shift = 0, .size = 4 }, +}; + static struct clksrc_clk clksrcs[] = { { .clk = { @@ -448,7 +762,200 @@ static struct clksrc_clk clksrcs[] = { .sources = &clkset_group, .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 24, .size = 4 }, .reg_div = { .reg = S5P_CLKDIV_PERIL3, .shift = 0, .size = 4 }, - }, + }, { + .clk = { + .name = "sclk_csis", + .id = 0, + .enable = s5pv310_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 24), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 24, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 24, .size = 4 }, + }, { + .clk = { + .name = "sclk_csis", + .id = 1, + .enable = s5pv310_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 28), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 28, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 }, + }, { + .clk = { + .name = "sclk_cam", + .id = 0, + .enable = s5pv310_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 16), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 16, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 }, + }, { + .clk = { + .name = "sclk_cam", + .id = 1, + .enable = s5pv310_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 20), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 20, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 20, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimc", + .id = 0, + .enable = s5pv310_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 0, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimc", + .id = 1, + .enable = s5pv310_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 4), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 4, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 4, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimc", + .id = 2, + .enable = s5pv310_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 8), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 8, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 8, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimc", + .id = 3, + .enable = s5pv310_clksrc_mask_cam_ctrl, + .ctrlbit = (1 << 12), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 12, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 12, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimd", + .id = 0, + .enable = s5pv310_clksrc_mask_lcd0_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_LCD0, .shift = 0, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_LCD0, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimd", + .id = 1, + .enable = s5pv310_clksrc_mask_lcd1_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_sata", + .id = -1, + .enable = s5pv310_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 24), + }, + .sources = &clkset_mout_corebus, + .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 }, + .reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 }, + }, { + .clk = { + .name = "sclk_spi", + .id = 0, + .enable = s5pv310_clksrc_mask_peril1_ctrl, + .ctrlbit = (1 << 16), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 16, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_spi", + .id = 1, + .enable = s5pv310_clksrc_mask_peril1_ctrl, + .ctrlbit = (1 << 20), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 20, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 16, .size = 4 }, + }, { + .clk = { + .name = "sclk_spi", + .id = 2, + .enable = s5pv310_clksrc_mask_peril1_ctrl, + .ctrlbit = (1 << 24), + }, + .sources = &clkset_group, + .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 24, .size = 4 }, + .reg_div = { .reg = S5P_CLKDIV_PERIL2, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_fimg2d", + .id = -1, + }, + .sources = &clkset_mout_g2d, + .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 8, .size = 1 }, + .reg_div = { .reg = S5P_CLKDIV_IMAGE, .shift = 0, .size = 4 }, + }, { + .clk = { + .name = "sclk_mmc", + .id = 0, + .parent = &clk_dout_mmc0.clk, + .enable = s5pv310_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 0), + }, + .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 8, .size = 8 }, + }, { + .clk = { + .name = "sclk_mmc", + .id = 1, + .parent = &clk_dout_mmc1.clk, + .enable = s5pv310_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 4), + }, + .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 24, .size = 8 }, + }, { + .clk = { + .name = "sclk_mmc", + .id = 2, + .parent = &clk_dout_mmc2.clk, + .enable = s5pv310_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 8), + }, + .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 8, .size = 8 }, + }, { + .clk = { + .name = "sclk_mmc", + .id = 3, + .parent = &clk_dout_mmc3.clk, + .enable = s5pv310_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 12), + }, + .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 24, .size = 8 }, + }, { + .clk = { + .name = "sclk_mmc", + .id = 4, + .parent = &clk_dout_mmc4.clk, + .enable = s5pv310_clksrc_mask_fsys_ctrl, + .ctrlbit = (1 << 16), + }, + .reg_div = { .reg = S5P_CLKDIV_FSYS3, .shift = 8, .size = 8 }, + } }; /* Clock initialization code */ @@ -464,8 +971,6 @@ static struct clksrc_clk *sysclks[] = { &clk_aclk_cores, &clk_aclk_corem1, &clk_periphclk, - &clk_atclk, - &clk_pclk_dbg, &clk_mout_corebus, &clk_sclk_dmc, &clk_aclk_cored, @@ -478,6 +983,11 @@ static struct clksrc_clk *sysclks[] = { &clk_aclk_100, &clk_aclk_160, &clk_aclk_133, + &clk_dout_mmc0, + &clk_dout_mmc1, + &clk_dout_mmc2, + &clk_dout_mmc3, + &clk_dout_mmc4, }; void __init_or_cpufreq s5pv310_setup_clocks(void) @@ -490,15 +1000,11 @@ void __init_or_cpufreq s5pv310_setup_clocks(void) unsigned long vpllsrc; unsigned long xtal; unsigned long armclk; - unsigned long aclk_corem0; - unsigned long aclk_cores; - unsigned long aclk_corem1; - unsigned long periphclk; unsigned long sclk_dmc; - unsigned long aclk_cored; - unsigned long aclk_corep; - unsigned long aclk_acp; - unsigned long pclk_acp; + unsigned long aclk_200; + unsigned long aclk_100; + unsigned long aclk_160; + unsigned long aclk_133; unsigned int ptr; printk(KERN_DEBUG "%s: registering clocks\n", __func__); @@ -529,26 +1035,21 @@ void __init_or_cpufreq s5pv310_setup_clocks(void) apll, mpll, epll, vpll); armclk = clk_get_rate(&clk_armclk.clk); - aclk_corem0 = clk_get_rate(&clk_aclk_corem0.clk); - aclk_cores = clk_get_rate(&clk_aclk_cores.clk); - aclk_corem1 = clk_get_rate(&clk_aclk_corem1.clk); - periphclk = clk_get_rate(&clk_periphclk.clk); sclk_dmc = clk_get_rate(&clk_sclk_dmc.clk); - aclk_cored = clk_get_rate(&clk_aclk_cored.clk); - aclk_corep = clk_get_rate(&clk_aclk_corep.clk); - aclk_acp = clk_get_rate(&clk_aclk_acp.clk); - pclk_acp = clk_get_rate(&clk_pclk_acp.clk); - - printk(KERN_INFO "S5PV310: ARMCLK=%ld, COREM0=%ld, CORES=%ld\n" - "COREM1=%ld, PERI=%ld, DMC=%ld, CORED=%ld\n" - "COREP=%ld, ACLK_ACP=%ld, PCLK_ACP=%ld", - armclk, aclk_corem0, aclk_cores, aclk_corem1, - periphclk, sclk_dmc, aclk_cored, aclk_corep, - aclk_acp, pclk_acp); + + aclk_200 = clk_get_rate(&clk_aclk_200.clk); + aclk_100 = clk_get_rate(&clk_aclk_100.clk); + aclk_160 = clk_get_rate(&clk_aclk_160.clk); + aclk_133 = clk_get_rate(&clk_aclk_133.clk); + + printk(KERN_INFO "S5PV310: ARMCLK=%ld, DMC=%ld, ACLK200=%ld\n" + "ACLK100=%ld, ACLK160=%ld, ACLK133=%ld\n", + armclk, sclk_dmc, aclk_200, + aclk_100, aclk_160, aclk_133); clk_f.rate = armclk; clk_h.rate = sclk_dmc; - clk_p.rate = periphclk; + clk_p.rate = aclk_100; for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) s3c_set_clksrc(&clksrcs[ptr], true); diff --git a/arch/arm/mach-s5pv310/cpu.c b/arch/arm/mach-s5pv310/cpu.c index 4add39853ff..82ce4aa6d61 100644 --- a/arch/arm/mach-s5pv310/cpu.c +++ b/arch/arm/mach-s5pv310/cpu.c @@ -15,10 +15,12 @@ #include <asm/mach/irq.h> #include <asm/proc-fns.h> +#include <asm/hardware/cache-l2x0.h> #include <plat/cpu.h> #include <plat/clock.h> #include <plat/s5pv310.h> +#include <plat/sdhci.h> #include <mach/regs-irq.h> @@ -56,15 +58,30 @@ static struct map_desc s5pv310_iodesc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S5P_VA_GPIO, + .virtual = (unsigned long)S5P_VA_GPIO1, .pfn = __phys_to_pfn(S5PV310_PA_GPIO1), .length = SZ_4K, .type = MT_DEVICE, }, { + .virtual = (unsigned long)S5P_VA_GPIO2, + .pfn = __phys_to_pfn(S5PV310_PA_GPIO2), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_GPIO3, + .pfn = __phys_to_pfn(S5PV310_PA_GPIO3), + .length = SZ_256, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)S3C_VA_UART, .pfn = __phys_to_pfn(S3C_PA_UART), .length = SZ_512K, .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_SROMC, + .pfn = __phys_to_pfn(S5PV310_PA_SROMC), + .length = SZ_4K, + .type = MT_DEVICE, }, }; @@ -83,6 +100,12 @@ static void s5pv310_idle(void) void __init s5pv310_map_io(void) { iotable_init(s5pv310_iodesc, ARRAY_SIZE(s5pv310_iodesc)); + + /* initialize device information early */ + s5pv310_default_sdhci0(); + s5pv310_default_sdhci1(); + s5pv310_default_sdhci2(); + s5pv310_default_sdhci3(); } void __init s5pv310_init_clocks(int xtal) @@ -131,6 +154,28 @@ static int __init s5pv310_core_init(void) core_initcall(s5pv310_core_init); +#ifdef CONFIG_CACHE_L2X0 +static int __init s5pv310_l2x0_cache_init(void) +{ + /* TAG, Data Latency Control: 2cycle */ + __raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL); + __raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL); + + /* L2X0 Prefetch Control */ + __raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL); + + /* L2X0 Power Control */ + __raw_writel(L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN, + S5P_VA_L2CC + L2X0_POWER_CTRL); + + l2x0_init(S5P_VA_L2CC, 0x7C070001, 0xC200ffff); + + return 0; +} + +early_initcall(s5pv310_l2x0_cache_init); +#endif + int __init s5pv310_init(void) { printk(KERN_INFO "S5PV310: Initializing architecture\n"); diff --git a/arch/arm/mach-s5pv310/gpiolib.c b/arch/arm/mach-s5pv310/gpiolib.c new file mode 100644 index 00000000000..55217b8923e --- /dev/null +++ b/arch/arm/mach-s5pv310/gpiolib.c @@ -0,0 +1,304 @@ +/* linux/arch/arm/mach-s5pv310/gpiolib.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5PV310 - GPIOlib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <mach/map.h> + +#include <plat/gpio-core.h> +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> + +static struct s3c_gpio_cfg gpio_cfg = { + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_cfg gpio_cfg_noint = { + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +/* + * Following are the gpio banks in v310. + * + * The 'config' member when left to NULL, is initialized to the default + * structure gpio_cfg in the init function below. + * + * The 'base' member is also initialized in the init function below. + * Note: The initialization of 'base' member of s3c_gpio_chip structure + * uses the above macro and depends on the banks being listed in order here. + */ +static struct s3c_gpio_chip s5pv310_gpio_part1_4bit[] = { + { + .chip = { + .base = S5PV310_GPA0(0), + .ngpio = S5PV310_GPIO_A0_NR, + .label = "GPA0", + }, + }, { + .chip = { + .base = S5PV310_GPA1(0), + .ngpio = S5PV310_GPIO_A1_NR, + .label = "GPA1", + }, + }, { + .chip = { + .base = S5PV310_GPB(0), + .ngpio = S5PV310_GPIO_B_NR, + .label = "GPB", + }, + }, { + .chip = { + .base = S5PV310_GPC0(0), + .ngpio = S5PV310_GPIO_C0_NR, + .label = "GPC0", + }, + }, { + .chip = { + .base = S5PV310_GPC1(0), + .ngpio = S5PV310_GPIO_C1_NR, + .label = "GPC1", + }, + }, { + .chip = { + .base = S5PV310_GPD0(0), + .ngpio = S5PV310_GPIO_D0_NR, + .label = "GPD0", + }, + }, { + .chip = { + .base = S5PV310_GPD1(0), + .ngpio = S5PV310_GPIO_D1_NR, + .label = "GPD1", + }, + }, { + .chip = { + .base = S5PV310_GPE0(0), + .ngpio = S5PV310_GPIO_E0_NR, + .label = "GPE0", + }, + }, { + .chip = { + .base = S5PV310_GPE1(0), + .ngpio = S5PV310_GPIO_E1_NR, + .label = "GPE1", + }, + }, { + .chip = { + .base = S5PV310_GPE2(0), + .ngpio = S5PV310_GPIO_E2_NR, + .label = "GPE2", + }, + }, { + .chip = { + .base = S5PV310_GPE3(0), + .ngpio = S5PV310_GPIO_E3_NR, + .label = "GPE3", + }, + }, { + .chip = { + .base = S5PV310_GPE4(0), + .ngpio = S5PV310_GPIO_E4_NR, + .label = "GPE4", + }, + }, { + .chip = { + .base = S5PV310_GPF0(0), + .ngpio = S5PV310_GPIO_F0_NR, + .label = "GPF0", + }, + }, { + .chip = { + .base = S5PV310_GPF1(0), + .ngpio = S5PV310_GPIO_F1_NR, + .label = "GPF1", + }, + }, { + .chip = { + .base = S5PV310_GPF2(0), + .ngpio = S5PV310_GPIO_F2_NR, + .label = "GPF2", + }, + }, { + .chip = { + .base = S5PV310_GPF3(0), + .ngpio = S5PV310_GPIO_F3_NR, + .label = "GPF3", + }, + }, +}; + +static struct s3c_gpio_chip s5pv310_gpio_part2_4bit[] = { + { + .chip = { + .base = S5PV310_GPJ0(0), + .ngpio = S5PV310_GPIO_J0_NR, + .label = "GPJ0", + }, + }, { + .chip = { + .base = S5PV310_GPJ1(0), + .ngpio = S5PV310_GPIO_J1_NR, + .label = "GPJ1", + }, + }, { + .chip = { + .base = S5PV310_GPK0(0), + .ngpio = S5PV310_GPIO_K0_NR, + .label = "GPK0", + }, + }, { + .chip = { + .base = S5PV310_GPK1(0), + .ngpio = S5PV310_GPIO_K1_NR, + .label = "GPK1", + }, + }, { + .chip = { + .base = S5PV310_GPK2(0), + .ngpio = S5PV310_GPIO_K2_NR, + .label = "GPK2", + }, + }, { + .chip = { + .base = S5PV310_GPK3(0), + .ngpio = S5PV310_GPIO_K3_NR, + .label = "GPK3", + }, + }, { + .chip = { + .base = S5PV310_GPL0(0), + .ngpio = S5PV310_GPIO_L0_NR, + .label = "GPL0", + }, + }, { + .chip = { + .base = S5PV310_GPL1(0), + .ngpio = S5PV310_GPIO_L1_NR, + .label = "GPL1", + }, + }, { + .chip = { + .base = S5PV310_GPL2(0), + .ngpio = S5PV310_GPIO_L2_NR, + .label = "GPL2", + }, + }, { + .base = (S5P_VA_GPIO2 + 0xC00), + .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(0), + .chip = { + .base = S5PV310_GPX0(0), + .ngpio = S5PV310_GPIO_X0_NR, + .label = "GPX0", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO2 + 0xC20), + .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(8), + .chip = { + .base = S5PV310_GPX1(0), + .ngpio = S5PV310_GPIO_X1_NR, + .label = "GPX1", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO2 + 0xC40), + .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(16), + .chip = { + .base = S5PV310_GPX2(0), + .ngpio = S5PV310_GPIO_X2_NR, + .label = "GPX2", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO2 + 0xC60), + .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(24), + .chip = { + .base = S5PV310_GPX3(0), + .ngpio = S5PV310_GPIO_X3_NR, + .label = "GPX3", + .to_irq = samsung_gpiolib_to_irq, + }, + }, +}; + +static struct s3c_gpio_chip s5pv310_gpio_part3_4bit[] = { + { + .chip = { + .base = S5PV310_GPZ(0), + .ngpio = S5PV310_GPIO_Z_NR, + .label = "GPZ", + }, + }, +}; + +static __init int s5pv310_gpiolib_init(void) +{ + struct s3c_gpio_chip *chip; + int i; + int nr_chips; + + /* GPIO part 1 */ + + chip = s5pv310_gpio_part1_4bit; + nr_chips = ARRAY_SIZE(s5pv310_gpio_part1_4bit); + + for (i = 0; i < nr_chips; i++, chip++) { + if (chip->config == NULL) + chip->config = &gpio_cfg; + if (chip->base == NULL) + chip->base = S5P_VA_GPIO1 + (i) * 0x20; + } + + samsung_gpiolib_add_4bit_chips(s5pv310_gpio_part1_4bit, nr_chips); + + /* GPIO part 2 */ + + chip = s5pv310_gpio_part2_4bit; + nr_chips = ARRAY_SIZE(s5pv310_gpio_part2_4bit); + + for (i = 0; i < nr_chips; i++, chip++) { + if (chip->config == NULL) + chip->config = &gpio_cfg; + if (chip->base == NULL) + chip->base = S5P_VA_GPIO2 + (i) * 0x20; + } + + samsung_gpiolib_add_4bit_chips(s5pv310_gpio_part2_4bit, nr_chips); + + /* GPIO part 3 */ + + chip = s5pv310_gpio_part3_4bit; + nr_chips = ARRAY_SIZE(s5pv310_gpio_part3_4bit); + + for (i = 0; i < nr_chips; i++, chip++) { + if (chip->config == NULL) + chip->config = &gpio_cfg; + if (chip->base == NULL) + chip->base = S5P_VA_GPIO3 + (i) * 0x20; + } + + samsung_gpiolib_add_4bit_chips(s5pv310_gpio_part3_4bit, nr_chips); + + return 0; +} +core_initcall(s5pv310_gpiolib_init); diff --git a/arch/arm/mach-s5pv310/hotplug.c b/arch/arm/mach-s5pv310/hotplug.c new file mode 100644 index 00000000000..03652c3605f --- /dev/null +++ b/arch/arm/mach-s5pv310/hotplug.c @@ -0,0 +1,144 @@ +/* linux arch/arm/mach-s5pv310/hotplug.c + * + * Cloned from linux/arch/arm/mach-realview/hotplug.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/smp.h> +#include <linux/completion.h> + +#include <asm/cacheflush.h> + +extern volatile int pen_release; + +static DECLARE_COMPLETION(cpu_killed); + +static inline void cpu_enter_lowpower(void) +{ + unsigned int v; + + flush_cache_all(); + asm volatile( + " mcr p15, 0, %1, c7, c5, 0\n" + " mcr p15, 0, %1, c7, c10, 4\n" + /* + * Turn off coherency + */ + " mrc p15, 0, %0, c1, c0, 1\n" + " bic %0, %0, #0x20\n" + " mcr p15, 0, %0, c1, c0, 1\n" + " mrc p15, 0, %0, c1, c0, 0\n" + " bic %0, %0, #0x04\n" + " mcr p15, 0, %0, c1, c0, 0\n" + : "=&r" (v) + : "r" (0) + : "cc"); +} + +static inline void cpu_leave_lowpower(void) +{ + unsigned int v; + + asm volatile( + "mrc p15, 0, %0, c1, c0, 0\n" + " orr %0, %0, #0x04\n" + " mcr p15, 0, %0, c1, c0, 0\n" + " mrc p15, 0, %0, c1, c0, 1\n" + " orr %0, %0, #0x20\n" + " mcr p15, 0, %0, c1, c0, 1\n" + : "=&r" (v) + : + : "cc"); +} + +static inline void platform_do_lowpower(unsigned int cpu) +{ + /* + * there is no power-control hardware on this platform, so all + * we can do is put the core into WFI; this is safe as the calling + * code will have already disabled interrupts + */ + for (;;) { + /* + * here's the WFI + */ + asm(".word 0xe320f003\n" + : + : + : "memory", "cc"); + + if (pen_release == cpu) { + /* + * OK, proper wakeup, we're done + */ + break; + } + + /* + * getting here, means that we have come out of WFI without + * having been woken up - this shouldn't happen + * + * The trouble is, letting people know about this is not really + * possible, since we are currently running incoherently, and + * therefore cannot safely call printk() or anything else + */ +#ifdef DEBUG + printk(KERN_WARN "CPU%u: spurious wakeup call\n", cpu); +#endif + } +} + +int platform_cpu_kill(unsigned int cpu) +{ + return wait_for_completion_timeout(&cpu_killed, 5000); +} + +/* + * platform-specific code to shutdown a CPU + * + * Called with IRQs disabled + */ +void platform_cpu_die(unsigned int cpu) +{ +#ifdef DEBUG + unsigned int this_cpu = hard_smp_processor_id(); + + if (cpu != this_cpu) { + printk(KERN_CRIT "Eek! platform_cpu_die running on %u, should be %u\n", + this_cpu, cpu); + BUG(); + } +#endif + + printk(KERN_NOTICE "CPU%u: shutdown\n", cpu); + complete(&cpu_killed); + + /* + * we're ready for shutdown now, so do it + */ + cpu_enter_lowpower(); + platform_do_lowpower(cpu); + + /* + * bring this CPU back into the world of cache + * coherency, and then restore interrupts + */ + cpu_leave_lowpower(); +} + +int platform_cpu_disable(unsigned int cpu) +{ + /* + * we don't allow CPU 0 to be shutdown (it is still too special + * e.g. clock tick interrupts) + */ + return cpu == 0 ? -EPERM : 0; +} diff --git a/arch/arm/mach-s5pv310/include/mach/irqs.h b/arch/arm/mach-s5pv310/include/mach/irqs.h index 471fc3bb199..99e7dad8a85 100644 --- a/arch/arm/mach-s5pv310/include/mach/irqs.h +++ b/arch/arm/mach-s5pv310/include/mach/irqs.h @@ -3,7 +3,7 @@ * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com/ * - * S5PV210 - IRQ definitions + * S5PV310 - IRQ definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -60,6 +60,9 @@ #define IRQ_TIMER3_VIC COMBINER_IRQ(22, 3) #define IRQ_TIMER4_VIC COMBINER_IRQ(22, 4) +#define IRQ_RTC_ALARM COMBINER_IRQ(23, 0) +#define IRQ_RTC_TIC COMBINER_IRQ(23, 1) + #define IRQ_UART0 COMBINER_IRQ(26, 0) #define IRQ_UART1 COMBINER_IRQ(26, 1) #define IRQ_UART2 COMBINER_IRQ(26, 2) @@ -67,13 +70,46 @@ #define IRQ_UART4 COMBINER_IRQ(26, 4) #define IRQ_IIC COMBINER_IRQ(27, 0) +#define IRQ_IIC1 COMBINER_IRQ(27, 1) +#define IRQ_IIC2 COMBINER_IRQ(27, 2) +#define IRQ_IIC3 COMBINER_IRQ(27, 3) +#define IRQ_IIC4 COMBINER_IRQ(27, 4) +#define IRQ_IIC5 COMBINER_IRQ(27, 5) +#define IRQ_IIC6 COMBINER_IRQ(27, 6) +#define IRQ_IIC7 COMBINER_IRQ(27, 7) + +#define IRQ_HSMMC0 COMBINER_IRQ(29, 0) +#define IRQ_HSMMC1 COMBINER_IRQ(29, 1) +#define IRQ_HSMMC2 COMBINER_IRQ(29, 2) +#define IRQ_HSMMC3 COMBINER_IRQ(29, 3) #define IRQ_ONENAND_AUDI COMBINER_IRQ(34, 0) -/* Set the default NR_IRQS */ +#define IRQ_EINT4 COMBINER_IRQ(37, 0) +#define IRQ_EINT5 COMBINER_IRQ(37, 1) +#define IRQ_EINT6 COMBINER_IRQ(37, 2) +#define IRQ_EINT7 COMBINER_IRQ(37, 3) +#define IRQ_EINT8 COMBINER_IRQ(38, 0) + +#define IRQ_EINT9 COMBINER_IRQ(38, 1) +#define IRQ_EINT10 COMBINER_IRQ(38, 2) +#define IRQ_EINT11 COMBINER_IRQ(38, 3) +#define IRQ_EINT12 COMBINER_IRQ(38, 4) +#define IRQ_EINT13 COMBINER_IRQ(38, 5) +#define IRQ_EINT14 COMBINER_IRQ(38, 6) +#define IRQ_EINT15 COMBINER_IRQ(38, 7) + +#define IRQ_EINT16_31 COMBINER_IRQ(39, 0) -#define NR_IRQS COMBINER_IRQ(MAX_COMBINER_NR, 0) +#define MAX_COMBINER_NR 40 + +#define S5P_IRQ_EINT_BASE COMBINER_IRQ(MAX_COMBINER_NR, 0) + +#define S5P_EINT_BASE1 (S5P_IRQ_EINT_BASE + 0) +#define S5P_EINT_BASE2 (S5P_IRQ_EINT_BASE + 16) + +/* Set the default NR_IRQS */ -#define MAX_COMBINER_NR 39 +#define NR_IRQS (S5P_IRQ_EINT_BASE + 32) #endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-s5pv310/include/mach/map.h index aff6d23624b..7acf4e77e92 100644 --- a/arch/arm/mach-s5pv310/include/mach/map.h +++ b/arch/arm/mach-s5pv310/include/mach/map.h @@ -25,6 +25,8 @@ #define S5PV310_PA_SYSRAM (0x02025000) +#define S5PV310_PA_SROM_BANK(x) (0x04000000 + ((x) * 0x01000000)) + #define S5PC210_PA_ONENAND (0x0C000000) #define S5P_PA_ONENAND S5PC210_PA_ONENAND @@ -34,12 +36,13 @@ #define S5PV310_PA_CHIPID (0x10000000) #define S5P_PA_CHIPID S5PV310_PA_CHIPID -#define S5PV310_PA_SYSCON (0x10020000) +#define S5PV310_PA_SYSCON (0x10010000) #define S5P_PA_SYSCON S5PV310_PA_SYSCON #define S5PV310_PA_CMU (0x10030000) #define S5PV310_PA_WATCHDOG (0x10060000) +#define S5PV310_PA_RTC (0x10070000) #define S5PV310_PA_COMBINER (0x10448000) @@ -55,6 +58,8 @@ #define S5PV310_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000)) +#define S5PV310_PA_SROMC (0x12570000) + #define S5PV310_PA_UART (0x13800000) #define S5P_PA_UART(x) (S5PV310_PA_UART + ((x) * S3C_UART_OFFSET)) @@ -66,7 +71,7 @@ #define S5P_SZ_UART SZ_256 -#define S5PV310_PA_IIC0 (0x13860000) +#define S5PV310_PA_IIC(x) (0x13860000 + ((x) * 0x10000)) #define S5PV310_PA_TIMER (0x139D0000) #define S5P_PA_TIMER S5PV310_PA_TIMER @@ -80,7 +85,15 @@ #define S3C_PA_HSMMC1 S5PV310_PA_HSMMC(1) #define S3C_PA_HSMMC2 S5PV310_PA_HSMMC(2) #define S3C_PA_HSMMC3 S5PV310_PA_HSMMC(3) -#define S3C_PA_IIC S5PV310_PA_IIC0 +#define S3C_PA_IIC S5PV310_PA_IIC(0) +#define S3C_PA_IIC1 S5PV310_PA_IIC(1) +#define S3C_PA_IIC2 S5PV310_PA_IIC(2) +#define S3C_PA_IIC3 S5PV310_PA_IIC(3) +#define S3C_PA_IIC4 S5PV310_PA_IIC(4) +#define S3C_PA_IIC5 S5PV310_PA_IIC(5) +#define S3C_PA_IIC6 S5PV310_PA_IIC(6) +#define S3C_PA_IIC7 S5PV310_PA_IIC(7) +#define S3C_PA_RTC S5PV310_PA_RTC #define S3C_PA_WDT S5PV310_PA_WATCHDOG #endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/regs-clock.h b/arch/arm/mach-s5pv310/include/mach/regs-clock.h index 4013553cd9b..f1028cad978 100644 --- a/arch/arm/mach-s5pv310/include/mach/regs-clock.h +++ b/arch/arm/mach-s5pv310/include/mach/regs-clock.h @@ -26,11 +26,23 @@ #define S5P_CLKSRC_TOP0 S5P_CLKREG(0x0C210) #define S5P_CLKSRC_TOP1 S5P_CLKREG(0x0C214) - +#define S5P_CLKSRC_CAM S5P_CLKREG(0x0C220) +#define S5P_CLKSRC_IMAGE S5P_CLKREG(0x0C230) +#define S5P_CLKSRC_LCD0 S5P_CLKREG(0x0C234) +#define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238) +#define S5P_CLKSRC_FSYS S5P_CLKREG(0x0C240) #define S5P_CLKSRC_PERIL0 S5P_CLKREG(0x0C250) +#define S5P_CLKSRC_PERIL1 S5P_CLKREG(0x0C254) #define S5P_CLKDIV_TOP S5P_CLKREG(0x0C510) - +#define S5P_CLKDIV_CAM S5P_CLKREG(0x0C520) +#define S5P_CLKDIV_IMAGE S5P_CLKREG(0x0C530) +#define S5P_CLKDIV_LCD0 S5P_CLKREG(0x0C534) +#define S5P_CLKDIV_LCD1 S5P_CLKREG(0x0C538) +#define S5P_CLKDIV_FSYS0 S5P_CLKREG(0x0C540) +#define S5P_CLKDIV_FSYS1 S5P_CLKREG(0x0C544) +#define S5P_CLKDIV_FSYS2 S5P_CLKREG(0x0C548) +#define S5P_CLKDIV_FSYS3 S5P_CLKREG(0x0C54C) #define S5P_CLKDIV_PERIL0 S5P_CLKREG(0x0C550) #define S5P_CLKDIV_PERIL1 S5P_CLKREG(0x0C554) #define S5P_CLKDIV_PERIL2 S5P_CLKREG(0x0C558) @@ -38,9 +50,21 @@ #define S5P_CLKDIV_PERIL4 S5P_CLKREG(0x0C560) #define S5P_CLKDIV_PERIL5 S5P_CLKREG(0x0C564) +#define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310) +#define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320) +#define S5P_CLKSRC_MASK_LCD0 S5P_CLKREG(0x0C334) +#define S5P_CLKSRC_MASK_LCD1 S5P_CLKREG(0x0C338) +#define S5P_CLKSRC_MASK_FSYS S5P_CLKREG(0x0C340) #define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350) +#define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354) +#define S5P_CLKGATE_IP_CAM S5P_CLKREG(0x0C920) +#define S5P_CLKGATE_IP_IMAGE S5P_CLKREG(0x0C930) +#define S5P_CLKGATE_IP_LCD0 S5P_CLKREG(0x0C934) +#define S5P_CLKGATE_IP_LCD1 S5P_CLKREG(0x0C938) +#define S5P_CLKGATE_IP_FSYS S5P_CLKREG(0x0C940) #define S5P_CLKGATE_IP_PERIL S5P_CLKREG(0x0C950) +#define S5P_CLKGATE_IP_PERIR S5P_CLKREG(0x0C960) #define S5P_CLKSRC_CORE S5P_CLKREG(0x10200) #define S5P_CLKDIV_CORE0 S5P_CLKREG(0x10500) @@ -60,4 +84,8 @@ #define S5P_CLKGATE_SCLKCPU S5P_CLKREG(0x14800) +/* Compatibility defines */ + +#define S5P_EPLL_CON S5P_EPLL_CON0 + #endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/regs-gpio.h b/arch/arm/mach-s5pv310/include/mach/regs-gpio.h new file mode 100644 index 00000000000..82e9e0c9d45 --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/regs-gpio.h @@ -0,0 +1,42 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/regs-gpio.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5PV310 - GPIO (including EINT) register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_GPIO_H +#define __ASM_ARCH_REGS_GPIO_H __FILE__ + +#include <mach/map.h> +#include <mach/irqs.h> + +#define S5PV310_EINT40CON (S5P_VA_GPIO2 + 0xE00) +#define S5P_EINT_CON(x) (S5PV310_EINT40CON + ((x) * 0x4)) + +#define S5PV310_EINT40FLTCON0 (S5P_VA_GPIO2 + 0xE80) +#define S5P_EINT_FLTCON(x) (S5PV310_EINT40FLTCON0 + ((x) * 0x4)) + +#define S5PV310_EINT40MASK (S5P_VA_GPIO2 + 0xF00) +#define S5P_EINT_MASK(x) (S5PV310_EINT40MASK + ((x) * 0x4)) + +#define S5PV310_EINT40PEND (S5P_VA_GPIO2 + 0xF40) +#define S5P_EINT_PEND(x) (S5PV310_EINT40PEND + ((x) * 0x4)) + +#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3) + +#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7)) + +#define EINT_MODE S3C_GPIO_SFN(0xf) + +#define EINT_GPIO_0(x) S5PV310_GPX0(x) +#define EINT_GPIO_1(x) S5PV310_GPX1(x) +#define EINT_GPIO_2(x) S5PV310_GPX2(x) +#define EINT_GPIO_3(x) S5PV310_GPX3(x) + +#endif /* __ASM_ARCH_REGS_GPIO_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/regs-srom.h b/arch/arm/mach-s5pv310/include/mach/regs-srom.h new file mode 100644 index 00000000000..1898b3e1055 --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/regs-srom.h @@ -0,0 +1,50 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/regs-srom.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5PV310 - SROMC register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_SROM_H +#define __ASM_ARCH_REGS_SROM_H __FILE__ + +#include <mach/map.h> + +#define S5PV310_SROMREG(x) (S5P_VA_SROMC + (x)) + +#define S5PV310_SROM_BW S5PV310_SROMREG(0x0) +#define S5PV310_SROM_BC0 S5PV310_SROMREG(0x4) +#define S5PV310_SROM_BC1 S5PV310_SROMREG(0x8) +#define S5PV310_SROM_BC2 S5PV310_SROMREG(0xc) +#define S5PV310_SROM_BC3 S5PV310_SROMREG(0x10) + +/* one register BW holds 4 x 4-bit packed settings for NCS0 - NCS3 */ + +#define S5PV310_SROM_BW__DATAWIDTH__SHIFT 0 +#define S5PV310_SROM_BW__ADDRMODE__SHIFT 1 +#define S5PV310_SROM_BW__WAITENABLE__SHIFT 2 +#define S5PV310_SROM_BW__BYTEENABLE__SHIFT 3 + +#define S5PV310_SROM_BW__CS_MASK 0xf + +#define S5PV310_SROM_BW__NCS0__SHIFT 0 +#define S5PV310_SROM_BW__NCS1__SHIFT 4 +#define S5PV310_SROM_BW__NCS2__SHIFT 8 +#define S5PV310_SROM_BW__NCS3__SHIFT 12 + +/* applies to same to BCS0 - BCS3 */ + +#define S5PV310_SROM_BCX__PMC__SHIFT 0 +#define S5PV310_SROM_BCX__TACP__SHIFT 4 +#define S5PV310_SROM_BCX__TCAH__SHIFT 8 +#define S5PV310_SROM_BCX__TCOH__SHIFT 12 +#define S5PV310_SROM_BCX__TACC__SHIFT 16 +#define S5PV310_SROM_BCX__TCOS__SHIFT 24 +#define S5PV310_SROM_BCX__TACS__SHIFT 28 + +#endif /* __ASM_ARCH_REGS_SROM_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/vmalloc.h b/arch/arm/mach-s5pv310/include/mach/vmalloc.h index 256f221edf3..65759fb9758 100644 --- a/arch/arm/mach-s5pv310/include/mach/vmalloc.h +++ b/arch/arm/mach-s5pv310/include/mach/vmalloc.h @@ -17,6 +17,6 @@ #ifndef __ASM_ARCH_VMALLOC_H #define __ASM_ARCH_VMALLOC_H __FILE__ -#define VMALLOC_END (0xF0000000UL) +#define VMALLOC_END 0xF6000000UL #endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-s5pv310/irq-combiner.c b/arch/arm/mach-s5pv310/irq-combiner.c index 0f7052164f2..c3f88c3faf6 100644 --- a/arch/arm/mach-s5pv310/irq-combiner.c +++ b/arch/arm/mach-s5pv310/irq-combiner.c @@ -66,11 +66,7 @@ static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) if (status == 0) goto out; - for (combiner_irq = 0; combiner_irq < 32; combiner_irq++) { - if (status & 0x1) - break; - status >>= 1; - } + combiner_irq = __ffs(status); cascade_irq = combiner_irq + (chip_data->irq_offset & ~31); if (unlikely(cascade_irq >= NR_IRQS)) diff --git a/arch/arm/mach-s5pv310/irq-eint.c b/arch/arm/mach-s5pv310/irq-eint.c new file mode 100644 index 00000000000..5877503e92c --- /dev/null +++ b/arch/arm/mach-s5pv310/irq-eint.c @@ -0,0 +1,228 @@ +/* linux/arch/arm/mach-s5pv310/irq-eint.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5PV310 - IRQ EINT support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/sysdev.h> +#include <linux/gpio.h> + +#include <plat/pm.h> +#include <plat/cpu.h> +#include <plat/gpio-cfg.h> + +#include <mach/regs-gpio.h> + +static DEFINE_SPINLOCK(eint_lock); + +static unsigned int eint0_15_data[16]; + +static unsigned int s5pv310_get_irq_nr(unsigned int number) +{ + u32 ret = 0; + + switch (number) { + case 0 ... 3: + ret = (number + IRQ_EINT0); + break; + case 4 ... 7: + ret = (number + (IRQ_EINT4 - 4)); + break; + case 8 ... 15: + ret = (number + (IRQ_EINT8 - 8)); + break; + default: + printk(KERN_ERR "number available : %d\n", number); + } + + return ret; +} + +static inline void s5pv310_irq_eint_mask(unsigned int irq) +{ + u32 mask; + + spin_lock(&eint_lock); + mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(irq))); + mask |= eint_irq_to_bit(irq); + __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(irq))); + spin_unlock(&eint_lock); +} + +static void s5pv310_irq_eint_unmask(unsigned int irq) +{ + u32 mask; + + spin_lock(&eint_lock); + mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(irq))); + mask &= ~(eint_irq_to_bit(irq)); + __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(irq))); + spin_unlock(&eint_lock); +} + +static inline void s5pv310_irq_eint_ack(unsigned int irq) +{ + __raw_writel(eint_irq_to_bit(irq), S5P_EINT_PEND(EINT_REG_NR(irq))); +} + +static void s5pv310_irq_eint_maskack(unsigned int irq) +{ + s5pv310_irq_eint_mask(irq); + s5pv310_irq_eint_ack(irq); +} + +static int s5pv310_irq_eint_set_type(unsigned int irq, unsigned int type) +{ + int offs = EINT_OFFSET(irq); + int shift; + u32 ctrl, mask; + u32 newvalue = 0; + + switch (type) { + case IRQ_TYPE_EDGE_RISING: + newvalue = S5P_IRQ_TYPE_EDGE_RISING; + break; + + case IRQ_TYPE_EDGE_FALLING: + newvalue = S5P_IRQ_TYPE_EDGE_FALLING; + break; + + case IRQ_TYPE_EDGE_BOTH: + newvalue = S5P_IRQ_TYPE_EDGE_BOTH; + break; + + case IRQ_TYPE_LEVEL_LOW: + newvalue = S5P_IRQ_TYPE_LEVEL_LOW; + break; + + case IRQ_TYPE_LEVEL_HIGH: + newvalue = S5P_IRQ_TYPE_LEVEL_HIGH; + break; + + default: + printk(KERN_ERR "No such irq type %d", type); + return -EINVAL; + } + + shift = (offs & 0x7) * 4; + mask = 0x7 << shift; + + spin_lock(&eint_lock); + ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(irq))); + ctrl &= ~mask; + ctrl |= newvalue << shift; + __raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(irq))); + spin_unlock(&eint_lock); + + switch (offs) { + case 0 ... 7: + s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE); + break; + case 8 ... 15: + s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE); + break; + case 16 ... 23: + s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE); + break; + case 24 ... 31: + s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE); + break; + default: + printk(KERN_ERR "No such irq number %d", offs); + } + + return 0; +} + +static struct irq_chip s5pv310_irq_eint = { + .name = "s5pv310-eint", + .mask = s5pv310_irq_eint_mask, + .unmask = s5pv310_irq_eint_unmask, + .mask_ack = s5pv310_irq_eint_maskack, + .ack = s5pv310_irq_eint_ack, + .set_type = s5pv310_irq_eint_set_type, +#ifdef CONFIG_PM + .set_wake = s3c_irqext_wake, +#endif +}; + +/* s5pv310_irq_demux_eint + * + * This function demuxes the IRQ from from EINTs 16 to 31. + * It is designed to be inlined into the specific handler + * s5p_irq_demux_eintX_Y. + * + * Each EINT pend/mask registers handle eight of them. + */ +static inline void s5pv310_irq_demux_eint(unsigned int start) +{ + unsigned int irq; + + u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start))); + u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start))); + + status &= ~mask; + status &= 0xff; + + while (status) { + irq = fls(status) - 1; + generic_handle_irq(irq + start); + status &= ~(1 << irq); + } +} + +static void s5pv310_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) +{ + s5pv310_irq_demux_eint(IRQ_EINT(16)); + s5pv310_irq_demux_eint(IRQ_EINT(24)); +} + +static void s5pv310_irq_eint0_15(unsigned int irq, struct irq_desc *desc) +{ + u32 *irq_data = get_irq_data(irq); + struct irq_chip *chip = get_irq_chip(irq); + + chip->mask(irq); + + if (chip->ack) + chip->ack(irq); + + generic_handle_irq(*irq_data); + + chip->unmask(irq); +} + +int __init s5pv310_init_irq_eint(void) +{ + int irq; + + for (irq = 0 ; irq <= 31 ; irq++) { + set_irq_chip(IRQ_EINT(irq), &s5pv310_irq_eint); + set_irq_handler(IRQ_EINT(irq), handle_level_irq); + set_irq_flags(IRQ_EINT(irq), IRQF_VALID); + } + + set_irq_chained_handler(IRQ_EINT16_31, s5pv310_irq_demux_eint16_31); + + for (irq = 0 ; irq <= 15 ; irq++) { + eint0_15_data[irq] = IRQ_EINT(irq); + + set_irq_data(s5pv310_get_irq_nr(irq), &eint0_15_data[irq]); + set_irq_chained_handler(s5pv310_get_irq_nr(irq), + s5pv310_irq_eint0_15); + } + + return 0; +} + +arch_initcall(s5pv310_init_irq_eint); diff --git a/arch/arm/mach-s5pv310/mach-smdkc210.c b/arch/arm/mach-s5pv310/mach-smdkc210.c new file mode 100644 index 00000000000..2b8d4fc52d7 --- /dev/null +++ b/arch/arm/mach-s5pv310/mach-smdkc210.c @@ -0,0 +1,202 @@ +/* linux/arch/arm/mach-s5pv310/mach-smdkc210.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/serial_core.h> +#include <linux/gpio.h> +#include <linux/mmc/host.h> +#include <linux/platform_device.h> +#include <linux/smsc911x.h> +#include <linux/io.h> + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <plat/regs-serial.h> +#include <plat/s5pv310.h> +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/sdhci.h> + +#include <mach/map.h> +#include <mach/regs-srom.h> + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define SMDKC210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define SMDKC210_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define SMDKC210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG4 | \ + S5PV210_UFCON_RXTRIG4) + +static struct s3c2410_uartcfg smdkc210_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = SMDKC210_UCON_DEFAULT, + .ulcon = SMDKC210_ULCON_DEFAULT, + .ufcon = SMDKC210_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = SMDKC210_UCON_DEFAULT, + .ulcon = SMDKC210_ULCON_DEFAULT, + .ufcon = SMDKC210_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = SMDKC210_UCON_DEFAULT, + .ulcon = SMDKC210_ULCON_DEFAULT, + .ufcon = SMDKC210_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = SMDKC210_UCON_DEFAULT, + .ulcon = SMDKC210_ULCON_DEFAULT, + .ufcon = SMDKC210_UFCON_DEFAULT, + }, +}; + +static struct s3c_sdhci_platdata smdkc210_hsmmc0_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_GPIO, + .ext_cd_gpio = S5PV310_GPK0(2), + .ext_cd_gpio_invert = 1, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +#ifdef CONFIG_S5PV310_SDHCI_CH0_8BIT + .max_width = 8, + .host_caps = MMC_CAP_8_BIT_DATA, +#endif +}; + +static struct s3c_sdhci_platdata smdkc210_hsmmc1_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_GPIO, + .ext_cd_gpio = S5PV310_GPK0(2), + .ext_cd_gpio_invert = 1, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +}; + +static struct s3c_sdhci_platdata smdkc210_hsmmc2_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_GPIO, + .ext_cd_gpio = S5PV310_GPK2(2), + .ext_cd_gpio_invert = 1, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +#ifdef CONFIG_S5PV310_SDHCI_CH2_8BIT + .max_width = 8, + .host_caps = MMC_CAP_8_BIT_DATA, +#endif +}; + +static struct s3c_sdhci_platdata smdkc210_hsmmc3_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_GPIO, + .ext_cd_gpio = S5PV310_GPK2(2), + .ext_cd_gpio_invert = 1, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +}; + +static struct resource smdkc210_smsc911x_resources[] = { + [0] = { + .start = S5PV310_PA_SROM_BANK(1), + .end = S5PV310_PA_SROM_BANK(1) + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_EINT(5), + .end = IRQ_EINT(5), + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, + }, +}; + +static struct smsc911x_platform_config smsc9215_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY, + .phy_interface = PHY_INTERFACE_MODE_MII, + .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67}, +}; + +static struct platform_device smdkc210_smsc911x = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smdkc210_smsc911x_resources), + .resource = smdkc210_smsc911x_resources, + .dev = { + .platform_data = &smsc9215_config, + }, +}; + +static struct platform_device *smdkc210_devices[] __initdata = { + &s3c_device_hsmmc0, + &s3c_device_hsmmc1, + &s3c_device_hsmmc2, + &s3c_device_hsmmc3, + &s3c_device_rtc, + &s3c_device_wdt, + &smdkc210_smsc911x, +}; + +static void __init smdkc210_smsc911x_init(void) +{ + u32 cs1; + + /* configure nCS1 width to 16 bits */ + cs1 = __raw_readl(S5PV310_SROM_BW) & + ~(S5PV310_SROM_BW__CS_MASK << + S5PV310_SROM_BW__NCS1__SHIFT); + cs1 |= ((1 << S5PV310_SROM_BW__DATAWIDTH__SHIFT) | + (1 << S5PV310_SROM_BW__WAITENABLE__SHIFT) | + (1 << S5PV310_SROM_BW__BYTEENABLE__SHIFT)) << + S5PV310_SROM_BW__NCS1__SHIFT; + __raw_writel(cs1, S5PV310_SROM_BW); + + /* set timing for nCS1 suitable for ethernet chip */ + __raw_writel((0x1 << S5PV310_SROM_BCX__PMC__SHIFT) | + (0x9 << S5PV310_SROM_BCX__TACP__SHIFT) | + (0xc << S5PV310_SROM_BCX__TCAH__SHIFT) | + (0x1 << S5PV310_SROM_BCX__TCOH__SHIFT) | + (0x6 << S5PV310_SROM_BCX__TACC__SHIFT) | + (0x1 << S5PV310_SROM_BCX__TCOS__SHIFT) | + (0x1 << S5PV310_SROM_BCX__TACS__SHIFT), S5PV310_SROM_BC1); +} + +static void __init smdkc210_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(24000000); + s3c24xx_init_uarts(smdkc210_uartcfgs, ARRAY_SIZE(smdkc210_uartcfgs)); +} + +static void __init smdkc210_machine_init(void) +{ + smdkc210_smsc911x_init(); + + s3c_sdhci0_set_platdata(&smdkc210_hsmmc0_pdata); + s3c_sdhci1_set_platdata(&smdkc210_hsmmc1_pdata); + s3c_sdhci2_set_platdata(&smdkc210_hsmmc2_pdata); + s3c_sdhci3_set_platdata(&smdkc210_hsmmc3_pdata); + + platform_add_devices(smdkc210_devices, ARRAY_SIZE(smdkc210_devices)); +} + +MACHINE_START(SMDKC210, "SMDKC210") + /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ + .boot_params = S5P_PA_SDRAM + 0x100, + .init_irq = s5pv310_init_irq, + .map_io = smdkc210_map_io, + .init_machine = smdkc210_machine_init, + .timer = &s5pv310_timer, +MACHINE_END diff --git a/arch/arm/mach-s5pv310/mach-smdkv310.c b/arch/arm/mach-s5pv310/mach-smdkv310.c index 46215a14b3b..35826d66632 100644 --- a/arch/arm/mach-s5pv310/mach-smdkv310.c +++ b/arch/arm/mach-s5pv310/mach-smdkv310.c @@ -9,16 +9,23 @@ */ #include <linux/serial_core.h> +#include <linux/gpio.h> +#include <linux/mmc/host.h> +#include <linux/platform_device.h> +#include <linux/smsc911x.h> +#include <linux/io.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> -#include <asm/hardware/cache-l2x0.h> #include <plat/regs-serial.h> #include <plat/s5pv310.h> #include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/sdhci.h> #include <mach/map.h> +#include <mach/regs-srom.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define SMDKV310_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -65,6 +72,107 @@ static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = { }, }; +static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_GPIO, + .ext_cd_gpio = S5PV310_GPK0(2), + .ext_cd_gpio_invert = 1, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +#ifdef CONFIG_S5PV310_SDHCI_CH0_8BIT + .max_width = 8, + .host_caps = MMC_CAP_8_BIT_DATA, +#endif +}; + +static struct s3c_sdhci_platdata smdkv310_hsmmc1_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_GPIO, + .ext_cd_gpio = S5PV310_GPK0(2), + .ext_cd_gpio_invert = 1, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +}; + +static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_GPIO, + .ext_cd_gpio = S5PV310_GPK2(2), + .ext_cd_gpio_invert = 1, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +#ifdef CONFIG_S5PV310_SDHCI_CH2_8BIT + .max_width = 8, + .host_caps = MMC_CAP_8_BIT_DATA, +#endif +}; + +static struct s3c_sdhci_platdata smdkv310_hsmmc3_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_GPIO, + .ext_cd_gpio = S5PV310_GPK2(2), + .ext_cd_gpio_invert = 1, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +}; + +static struct resource smdkv310_smsc911x_resources[] = { + [0] = { + .start = S5PV310_PA_SROM_BANK(1), + .end = S5PV310_PA_SROM_BANK(1) + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_EINT(5), + .end = IRQ_EINT(5), + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, + }, +}; + +static struct smsc911x_platform_config smsc9215_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY, + .phy_interface = PHY_INTERFACE_MODE_MII, + .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67}, +}; + +static struct platform_device smdkv310_smsc911x = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smdkv310_smsc911x_resources), + .resource = smdkv310_smsc911x_resources, + .dev = { + .platform_data = &smsc9215_config, + }, +}; + +static struct platform_device *smdkv310_devices[] __initdata = { + &s3c_device_hsmmc0, + &s3c_device_hsmmc1, + &s3c_device_hsmmc2, + &s3c_device_hsmmc3, + &s3c_device_rtc, + &s3c_device_wdt, + &smdkv310_smsc911x, +}; + +static void __init smdkv310_smsc911x_init(void) +{ + u32 cs1; + + /* configure nCS1 width to 16 bits */ + cs1 = __raw_readl(S5PV310_SROM_BW) & + ~(S5PV310_SROM_BW__CS_MASK << + S5PV310_SROM_BW__NCS1__SHIFT); + cs1 |= ((1 << S5PV310_SROM_BW__DATAWIDTH__SHIFT) | + (1 << S5PV310_SROM_BW__WAITENABLE__SHIFT) | + (1 << S5PV310_SROM_BW__BYTEENABLE__SHIFT)) << + S5PV310_SROM_BW__NCS1__SHIFT; + __raw_writel(cs1, S5PV310_SROM_BW); + + /* set timing for nCS1 suitable for ethernet chip */ + __raw_writel((0x1 << S5PV310_SROM_BCX__PMC__SHIFT) | + (0x9 << S5PV310_SROM_BCX__TACP__SHIFT) | + (0xc << S5PV310_SROM_BCX__TCAH__SHIFT) | + (0x1 << S5PV310_SROM_BCX__TCOH__SHIFT) | + (0x6 << S5PV310_SROM_BCX__TACC__SHIFT) | + (0x1 << S5PV310_SROM_BCX__TCOS__SHIFT) | + (0x1 << S5PV310_SROM_BCX__TACS__SHIFT), S5PV310_SROM_BC1); +} + static void __init smdkv310_map_io(void) { s5p_init_io(NULL, 0, S5P_VA_CHIPID); @@ -74,9 +182,14 @@ static void __init smdkv310_map_io(void) static void __init smdkv310_machine_init(void) { -#ifdef CONFIG_CACHE_L2X0 - l2x0_init(S5P_VA_L2CC, 1 << 28, 0xffffffff); -#endif + smdkv310_smsc911x_init(); + + s3c_sdhci0_set_platdata(&smdkv310_hsmmc0_pdata); + s3c_sdhci1_set_platdata(&smdkv310_hsmmc1_pdata); + s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata); + s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata); + + platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices)); } MACHINE_START(SMDKV310, "SMDKV310") diff --git a/arch/arm/mach-s5pv310/mach-universal_c210.c b/arch/arm/mach-s5pv310/mach-universal_c210.c index d7c2ec770f8..16d8fc00caf 100644 --- a/arch/arm/mach-s5pv310/mach-universal_c210.c +++ b/arch/arm/mach-s5pv310/mach-universal_c210.c @@ -7,15 +7,20 @@ * published by the Free Software Foundation. */ +#include <linux/platform_device.h> #include <linux/serial_core.h> +#include <linux/input.h> +#include <linux/i2c.h> +#include <linux/gpio_keys.h> +#include <linux/gpio.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> -#include <asm/hardware/cache-l2x0.h> #include <plat/regs-serial.h> #include <plat/s5pv310.h> #include <plat/cpu.h> +#include <plat/devs.h> #include <mach/map.h> @@ -60,6 +65,72 @@ static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = { }, }; +static struct gpio_keys_button universal_gpio_keys_tables[] = { + { + .code = KEY_VOLUMEUP, + .gpio = S5PV310_GPX2(0), /* XEINT16 */ + .desc = "gpio-keys: KEY_VOLUMEUP", + .type = EV_KEY, + .active_low = 1, + .debounce_interval = 1, + }, { + .code = KEY_VOLUMEDOWN, + .gpio = S5PV310_GPX2(1), /* XEINT17 */ + .desc = "gpio-keys: KEY_VOLUMEDOWN", + .type = EV_KEY, + .active_low = 1, + .debounce_interval = 1, + }, { + .code = KEY_CONFIG, + .gpio = S5PV310_GPX2(2), /* XEINT18 */ + .desc = "gpio-keys: KEY_CONFIG", + .type = EV_KEY, + .active_low = 1, + .debounce_interval = 1, + }, { + .code = KEY_CAMERA, + .gpio = S5PV310_GPX2(3), /* XEINT19 */ + .desc = "gpio-keys: KEY_CAMERA", + .type = EV_KEY, + .active_low = 1, + .debounce_interval = 1, + }, { + .code = KEY_OK, + .gpio = S5PV310_GPX3(5), /* XEINT29 */ + .desc = "gpio-keys: KEY_OK", + .type = EV_KEY, + .active_low = 1, + .debounce_interval = 1, + }, +}; + +static struct gpio_keys_platform_data universal_gpio_keys_data = { + .buttons = universal_gpio_keys_tables, + .nbuttons = ARRAY_SIZE(universal_gpio_keys_tables), +}; + +static struct platform_device universal_gpio_keys = { + .name = "gpio-keys", + .dev = { + .platform_data = &universal_gpio_keys_data, + }, +}; + +/* I2C0 */ +static struct i2c_board_info i2c0_devs[] __initdata = { + /* Camera, To be updated */ +}; + +/* I2C1 */ +static struct i2c_board_info i2c1_devs[] __initdata = { + /* Gyro, To be updated */ +}; + +static struct platform_device *universal_devices[] __initdata = { + &universal_gpio_keys, + &s5p_device_onenand, +}; + static void __init universal_map_io(void) { s5p_init_io(NULL, 0, S5P_VA_CHIPID); @@ -69,9 +140,11 @@ static void __init universal_map_io(void) static void __init universal_machine_init(void) { -#ifdef CONFIG_CACHE_L2X0 - l2x0_init(S5P_VA_L2CC, 1 << 28, 0xffffffff); -#endif + i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs)); + i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); + + /* Last */ + platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices)); } MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") diff --git a/arch/arm/mach-s5pv310/setup-i2c0.c b/arch/arm/mach-s5pv310/setup-i2c0.c index 43671280738..f47f8f3152e 100644 --- a/arch/arm/mach-s5pv310/setup-i2c0.c +++ b/arch/arm/mach-s5pv310/setup-i2c0.c @@ -21,8 +21,6 @@ struct platform_device; /* don't need the contents */ void s3c_i2c0_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgpin(S5PV310_GPD1(0), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV310_GPD1(0), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5PV310_GPD1(1), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV310_GPD1(1), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S5PV310_GPD1(0), 2, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s5pv310/setup-i2c1.c b/arch/arm/mach-s5pv310/setup-i2c1.c index 1ecd5bc35b5..9d07e4e2f14 100644 --- a/arch/arm/mach-s5pv310/setup-i2c1.c +++ b/arch/arm/mach-s5pv310/setup-i2c1.c @@ -18,8 +18,6 @@ struct platform_device; /* don't need the contents */ void s3c_i2c1_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgpin(S5PV310_GPD1(2), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV310_GPD1(2), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5PV310_GPD1(3), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV310_GPD1(3), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S5PV310_GPD1(2), 2, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s5pv310/setup-i2c2.c b/arch/arm/mach-s5pv310/setup-i2c2.c index 4c0d8def660..4163b1233da 100644 --- a/arch/arm/mach-s5pv310/setup-i2c2.c +++ b/arch/arm/mach-s5pv310/setup-i2c2.c @@ -18,8 +18,6 @@ struct platform_device; /* don't need the contents */ void s3c_i2c2_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgpin(S5PV310_GPA0(6), S3C_GPIO_SFN(3)); - s3c_gpio_setpull(S5PV310_GPA0(6), S3C_GPIO_PULL_UP); - s3c_gpio_cfgpin(S5PV310_GPA0(7), S3C_GPIO_SFN(3)); - s3c_gpio_setpull(S5PV310_GPA0(7), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S5PV310_GPA0(6), 2, + S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s5pv310/setup-i2c3.c b/arch/arm/mach-s5pv310/setup-i2c3.c new file mode 100644 index 00000000000..180f153d2a2 --- /dev/null +++ b/arch/arm/mach-s5pv310/setup-i2c3.c @@ -0,0 +1,23 @@ +/* + * linux/arch/arm/mach-s5pv310/setup-i2c3.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * + * I2C3 GPIO configuration. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +struct platform_device; /* don't need the contents */ + +#include <linux/gpio.h> +#include <plat/iic.h> +#include <plat/gpio-cfg.h> + +void s3c_i2c3_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgall_range(S5PV310_GPA1(2), 2, + S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); +} diff --git a/arch/arm/mach-s5pv310/setup-i2c4.c b/arch/arm/mach-s5pv310/setup-i2c4.c new file mode 100644 index 00000000000..909e8dfc531 --- /dev/null +++ b/arch/arm/mach-s5pv310/setup-i2c4.c @@ -0,0 +1,23 @@ +/* + * linux/arch/arm/mach-s5pv310/setup-i2c4.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * + * I2C4 GPIO configuration. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +struct platform_device; /* don't need the contents */ + +#include <linux/gpio.h> +#include <plat/iic.h> +#include <plat/gpio-cfg.h> + +void s3c_i2c4_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgall_range(S5PV310_GPB(2), 2, + S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); +} diff --git a/arch/arm/mach-s5pv310/setup-i2c5.c b/arch/arm/mach-s5pv310/setup-i2c5.c new file mode 100644 index 00000000000..5d0fa4ac028 --- /dev/null +++ b/arch/arm/mach-s5pv310/setup-i2c5.c @@ -0,0 +1,23 @@ +/* + * linux/arch/arm/mach-s5pv310/setup-i2c5.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * + * I2C5 GPIO configuration. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +struct platform_device; /* don't need the contents */ + +#include <linux/gpio.h> +#include <plat/iic.h> +#include <plat/gpio-cfg.h> + +void s3c_i2c5_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgall_range(S5PV310_GPB(6), 2, + S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); +} diff --git a/arch/arm/mach-s5pv310/setup-i2c6.c b/arch/arm/mach-s5pv310/setup-i2c6.c new file mode 100644 index 00000000000..34aafab92ac --- /dev/null +++ b/arch/arm/mach-s5pv310/setup-i2c6.c @@ -0,0 +1,23 @@ +/* + * linux/arch/arm/mach-s5pv310/setup-i2c6.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * + * I2C6 GPIO configuration. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +struct platform_device; /* don't need the contents */ + +#include <linux/gpio.h> +#include <plat/iic.h> +#include <plat/gpio-cfg.h> + +void s3c_i2c6_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgall_range(S5PV310_GPC1(3), 2, + S3C_GPIO_SFN(4), S3C_GPIO_PULL_UP); +} diff --git a/arch/arm/mach-s5pv310/setup-i2c7.c b/arch/arm/mach-s5pv310/setup-i2c7.c new file mode 100644 index 00000000000..9b25b8d1892 --- /dev/null +++ b/arch/arm/mach-s5pv310/setup-i2c7.c @@ -0,0 +1,23 @@ +/* + * linux/arch/arm/mach-s5pv310/setup-i2c7.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * + * I2C7 GPIO configuration. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +struct platform_device; /* don't need the contents */ + +#include <linux/gpio.h> +#include <plat/iic.h> +#include <plat/gpio-cfg.h> + +void s3c_i2c7_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgall_range(S5PV310_GPD0(2), 2, + S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); +} diff --git a/arch/arm/mach-s5pv310/setup-sdhci-gpio.c b/arch/arm/mach-s5pv310/setup-sdhci-gpio.c new file mode 100644 index 00000000000..86d38cc4913 --- /dev/null +++ b/arch/arm/mach-s5pv310/setup-sdhci-gpio.c @@ -0,0 +1,152 @@ +/* linux/arch/arm/mach-s5pv310/setup-sdhci-gpio.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV310 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/mmc/host.h> +#include <linux/mmc/card.h> + +#include <plat/gpio-cfg.h> +#include <plat/regs-sdhci.h> +#include <plat/sdhci.h> + +void s5pv310_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) +{ + struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; + unsigned int gpio; + + /* Set all the necessary GPK0[0:1] pins to special-function 2 */ + for (gpio = S5PV310_GPK0(0); gpio < S5PV310_GPK0(2); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + + switch (width) { + case 8: + for (gpio = S5PV310_GPK1(3); gpio <= S5PV310_GPK1(6); gpio++) { + /* Data pin GPK1[3:6] to special-funtion 3 */ + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + case 4: + for (gpio = S5PV310_GPK0(3); gpio <= S5PV310_GPK0(6); gpio++) { + /* Data pin GPK0[3:6] to special-funtion 2 */ + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + default: + break; + } + + if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { + s3c_gpio_cfgpin(S5PV310_GPK0(2), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PV310_GPK0(2), S3C_GPIO_PULL_UP); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } +} + +void s5pv310_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) +{ + struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; + unsigned int gpio; + + /* Set all the necessary GPK1[0:1] pins to special-function 2 */ + for (gpio = S5PV310_GPK1(0); gpio < S5PV310_GPK1(2); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + + for (gpio = S5PV310_GPK1(3); gpio <= S5PV310_GPK1(6); gpio++) { + /* Data pin GPK1[3:6] to special-function 2 */ + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + + if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { + s3c_gpio_cfgpin(S5PV310_GPK1(2), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PV310_GPK1(2), S3C_GPIO_PULL_UP); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } +} + +void s5pv310_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) +{ + struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; + unsigned int gpio; + + /* Set all the necessary GPK2[0:1] pins to special-function 2 */ + for (gpio = S5PV310_GPK2(0); gpio < S5PV310_GPK2(2); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + + switch (width) { + case 8: + for (gpio = S5PV310_GPK3(3); gpio <= S5PV310_GPK3(6); gpio++) { + /* Data pin GPK3[3:6] to special-function 3 */ + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + case 4: + for (gpio = S5PV310_GPK2(3); gpio <= S5PV310_GPK2(6); gpio++) { + /* Data pin GPK2[3:6] to special-function 2 */ + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + default: + break; + } + + if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { + s3c_gpio_cfgpin(S5PV310_GPK2(2), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PV310_GPK2(2), S3C_GPIO_PULL_UP); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } +} + +void s5pv310_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width) +{ + struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; + unsigned int gpio; + + /* Set all the necessary GPK3[0:1] pins to special-function 2 */ + for (gpio = S5PV310_GPK3(0); gpio < S5PV310_GPK3(2); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + + for (gpio = S5PV310_GPK3(3); gpio <= S5PV310_GPK3(6); gpio++) { + /* Data pin GPK3[3:6] to special-function 2 */ + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } + + if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { + s3c_gpio_cfgpin(S5PV310_GPK3(2), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(S5PV310_GPK3(2), S3C_GPIO_PULL_UP); + s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); + } +} diff --git a/arch/arm/mach-s5pv310/setup-sdhci.c b/arch/arm/mach-s5pv310/setup-sdhci.c new file mode 100644 index 00000000000..db8358fc466 --- /dev/null +++ b/arch/arm/mach-s5pv310/setup-sdhci.c @@ -0,0 +1,69 @@ +/* linux/arch/arm/mach-s5pv310/setup-sdhci.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV310 - Helper functions for settign up SDHCI device(s) (HSMMC) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/io.h> + +#include <linux/mmc/card.h> +#include <linux/mmc/host.h> + +#include <plat/regs-sdhci.h> + +/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ + +char *s5pv310_hsmmc_clksrcs[4] = { + [0] = NULL, + [1] = NULL, + [2] = "sclk_mmc", /* mmc_bus */ + [3] = NULL, +}; + +void s5pv310_setup_sdhci_cfg_card(struct platform_device *dev, void __iomem *r, + struct mmc_ios *ios, struct mmc_card *card) +{ + u32 ctrl2, ctrl3; + + /* don't need to alter anything acording to card-type */ + + ctrl2 = readl(r + S3C_SDHCI_CONTROL2); + + /* select base clock source to HCLK */ + + ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK; + + /* + * clear async mode, enable conflict mask, rx feedback ctrl, SD + * clk hold and no use debounce count + */ + + ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR | + S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK | + S3C_SDHCI_CTRL2_ENFBCLKRX | + S3C_SDHCI_CTRL2_DFCNT_NONE | + S3C_SDHCI_CTRL2_ENCLKOUTHOLD); + + /* Tx and Rx feedback clock delay control */ + + if (ios->clock < 25 * 1000000) + ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 | + S3C_SDHCI_CTRL3_FCSEL2 | + S3C_SDHCI_CTRL3_FCSEL1 | + S3C_SDHCI_CTRL3_FCSEL0); + else + ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0); + + writel(ctrl2, r + S3C_SDHCI_CONTROL2); + writel(ctrl3, r + S3C_SDHCI_CONTROL3); +} diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c index 7b44d0c592b..bcc43f34627 100644 --- a/arch/arm/plat-s3c24xx/common-smdk.c +++ b/arch/arm/plat-s3c24xx/common-smdk.c @@ -147,7 +147,7 @@ static struct mtd_partition smdk_default_nand_part[] = { [7] = { .name = "S3C2410 flash partition 7", .offset = SZ_1M * 48, - .size = SZ_16M, + .size = MTDPART_SIZ_FULL, } }; diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c index 4c0896f2572..243b6411050 100644 --- a/arch/arm/plat-s3c24xx/gpiolib.c +++ b/arch/arm/plat-s3c24xx/gpiolib.c @@ -74,11 +74,6 @@ static int s3c24xx_gpiolib_bankf_toirq(struct gpio_chip *chip, unsigned offset) return -EINVAL; } -static int s3c24xx_gpiolib_bankg_toirq(struct gpio_chip *chip, unsigned offset) -{ - return IRQ_EINT8 + offset; -} - static struct s3c_gpio_cfg s3c24xx_gpiocfg_banka = { .set_config = s3c_gpio_setcfg_s3c24xx_a, .get_config = s3c_gpio_getcfg_s3c24xx_a, @@ -157,12 +152,13 @@ struct s3c_gpio_chip s3c24xx_gpios[] = { [6] = { .base = S3C2410_GPGCON, .pm = __gpio_pm(&s3c_gpio_pm_2bit), + .irq_base = IRQ_EINT8, .chip = { .base = S3C2410_GPG(0), .owner = THIS_MODULE, .label = "GPIOG", .ngpio = 16, - .to_irq = s3c24xx_gpiolib_bankg_toirq, + .to_irq = samsung_gpiolib_to_irq, }, }, { .base = S3C2410_GPHCON, diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index 25960966af7..65dbfa8e0a8 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -32,6 +32,11 @@ config S5P_EXT_INT Use the external interrupts (other than GPIO interrupts.) Note: Do not choose this for S5P6440 and S5P6450. +config S5P_GPIO_INT + bool + help + Common code for the GPIO interrupts (other than external interrupts.) + config S5P_DEV_FIMC0 bool help diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile index f3e917e27da..de65238a7ae 100644 --- a/arch/arm/plat-s5p/Makefile +++ b/arch/arm/plat-s5p/Makefile @@ -18,6 +18,9 @@ obj-y += cpu.o obj-y += clock.o obj-y += irq.o obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o +obj-$(CONFIG_S5P_GPIO_INT) += irq-gpioint.o +obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_PM) += irq-pm.o # devices diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c index 8aaf4e6b60c..8d081d968c5 100644 --- a/arch/arm/plat-s5p/clock.c +++ b/arch/arm/plat-s5p/clock.c @@ -21,6 +21,8 @@ #include <linux/io.h> #include <asm/div64.h> +#include <mach/regs-clock.h> + #include <plat/clock.h> #include <plat/clock-clksrc.h> #include <plat/s5p-clock.h> @@ -88,14 +90,6 @@ struct clk clk_fout_vpll = { .ctrlbit = (1 << 31), }; -/* ARM clock */ -struct clk clk_arm = { - .name = "armclk", - .id = -1, - .rate = 0, - .ctrlbit = 0, -}; - /* Possible clock sources for APLL Mux */ static struct clk *clk_src_apll_list[] = { [0] = &clk_fin_apll, @@ -156,6 +150,24 @@ int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable) return 0; } +int s5p_epll_enable(struct clk *clk, int enable) +{ + unsigned int ctrlbit = clk->ctrlbit; + unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit; + + if (enable) + __raw_writel(epll_con | ctrlbit, S5P_EPLL_CON); + else + __raw_writel(epll_con, S5P_EPLL_CON); + + return 0; +} + +unsigned long s5p_epll_get_rate(struct clk *clk) +{ + return clk->rate; +} + static struct clk *s5p_clks[] __initdata = { &clk_ext_xtal_mux, &clk_48m, @@ -165,7 +177,6 @@ static struct clk *s5p_clks[] __initdata = { &clk_fout_epll, &clk_fout_dpll, &clk_fout_vpll, - &clk_arm, &clk_vpll, &clk_xusbxti, }; diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-s5p/include/plat/irqs.h index 3fb3a3a1746..ba9121c60a2 100644 --- a/arch/arm/plat-s5p/include/plat/irqs.h +++ b/arch/arm/plat-s5p/include/plat/irqs.h @@ -94,4 +94,22 @@ ((irq) - S5P_EINT_BASE1) : \ ((irq) + 16 - S5P_EINT_BASE2)) +#define IRQ_EINT_BIT(x) EINT_OFFSET(x) + +/* Typically only a few gpio chips require gpio interrupt support. + To avoid memory waste irq descriptors are allocated only for + S5P_GPIOINT_GROUP_COUNT chips, each with total number of + S5P_GPIOINT_GROUP_SIZE pins/irqs. Each GPIOINT group can be assiged + to any gpio chip with the s5p_register_gpio_interrupt() function */ +#define S5P_GPIOINT_GROUP_COUNT 4 +#define S5P_GPIOINT_GROUP_SIZE 8 +#define S5P_GPIOINT_COUNT (S5P_GPIOINT_GROUP_COUNT * S5P_GPIOINT_GROUP_SIZE) + +/* IRQ types common for all s5p platforms */ +#define S5P_IRQ_TYPE_LEVEL_LOW (0x00) +#define S5P_IRQ_TYPE_LEVEL_HIGH (0x01) +#define S5P_IRQ_TYPE_EDGE_FALLING (0x02) +#define S5P_IRQ_TYPE_EDGE_RISING (0x03) +#define S5P_IRQ_TYPE_EDGE_BOTH (0x04) + #endif /* __ASM_PLAT_S5P_IRQS_H */ diff --git a/arch/arm/plat-s5p/include/plat/map-s5p.h b/arch/arm/plat-s5p/include/plat/map-s5p.h index c4ff88bf647..fef353d4451 100644 --- a/arch/arm/plat-s5p/include/plat/map-s5p.h +++ b/arch/arm/plat-s5p/include/plat/map-s5p.h @@ -13,24 +13,38 @@ #ifndef __ASM_PLAT_MAP_S5P_H #define __ASM_PLAT_MAP_S5P_H __FILE__ -#define S5P_VA_CHIPID S3C_ADDR(0x00700000) -#define S5P_VA_GPIO S3C_ADDR(0x00500000) -#define S5P_VA_SYSTIMER S3C_ADDR(0x01200000) -#define S5P_VA_SROMC S3C_ADDR(0x01100000) -#define S5P_VA_SYSRAM S3C_ADDR(0x01180000) - -#define S5P_VA_COMBINER_BASE S3C_ADDR(0x00600000) +#define S5P_VA_CHIPID S3C_ADDR(0x02000000) +#define S5P_VA_CMU S3C_ADDR(0x02100000) +#define S5P_VA_GPIO S3C_ADDR(0x02200000) +#define S5P_VA_GPIO1 S5P_VA_GPIO +#define S5P_VA_GPIO2 S3C_ADDR(0x02240000) +#define S5P_VA_GPIO3 S3C_ADDR(0x02280000) + +#define S5P_VA_SYSRAM S3C_ADDR(0x02400000) +#define S5P_VA_DMC0 S3C_ADDR(0x02440000) +#define S5P_VA_DMC1 S3C_ADDR(0x02480000) +#define S5P_VA_SROMC S3C_ADDR(0x024C0000) + +#define S5P_VA_SYSTIMER S3C_ADDR(0x02500000) +#define S5P_VA_L2CC S3C_ADDR(0x02600000) + +#define S5P_VA_COMBINER_BASE S3C_ADDR(0x02700000) #define S5P_VA_COMBINER(x) (S5P_VA_COMBINER_BASE + ((x) >> 2) * 0x10) -#define S5P_VA_COREPERI_BASE S3C_ADDR(0x00800000) +#define S5P_VA_COREPERI_BASE S3C_ADDR(0x02800000) #define S5P_VA_COREPERI(x) (S5P_VA_COREPERI_BASE + (x)) #define S5P_VA_SCU S5P_VA_COREPERI(0x0) #define S5P_VA_GIC_CPU S5P_VA_COREPERI(0x100) #define S5P_VA_TWD S5P_VA_COREPERI(0x600) #define S5P_VA_GIC_DIST S5P_VA_COREPERI(0x1000) -#define S5P_VA_L2CC S3C_ADDR(0x00900000) -#define S5P_VA_CMU S3C_ADDR(0x00920000) +#define S3C_VA_USB_HSPHY S3C_ADDR(0x02900000) + +#define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000)) +#define VA_VIC0 VA_VIC(0) +#define VA_VIC1 VA_VIC(1) +#define VA_VIC2 VA_VIC(2) +#define VA_VIC3 VA_VIC(3) #define S5P_VA_UART(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET)) #define S5P_VA_UART0 S5P_VA_UART(0) @@ -42,10 +56,4 @@ #define S3C_UART_OFFSET (0x400) #endif -#define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000)) -#define VA_VIC0 VA_VIC(0) -#define VA_VIC1 VA_VIC(1) -#define VA_VIC2 VA_VIC(2) -#define VA_VIC3 VA_VIC(3) - #endif /* __ASM_PLAT_MAP_S5P_H */ diff --git a/arch/arm/plat-s5p/include/plat/s5p-clock.h b/arch/arm/plat-s5p/include/plat/s5p-clock.h index 17036c89840..2b6dcff8ab2 100644 --- a/arch/arm/plat-s5p/include/plat/s5p-clock.h +++ b/arch/arm/plat-s5p/include/plat/s5p-clock.h @@ -43,4 +43,8 @@ extern struct clksrc_sources clk_src_dpll; extern int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable); +/* Common EPLL operations for S5P platform */ +extern int s5p_epll_enable(struct clk *clk, int enable); +extern unsigned long s5p_epll_get_rate(struct clk *clk); + #endif /* __ASM_PLAT_S5P_CLOCK_H */ diff --git a/arch/arm/plat-s5p/irq-eint.c b/arch/arm/plat-s5p/irq-eint.c index f36cd332702..752f1a645f9 100644 --- a/arch/arm/plat-s5p/irq-eint.c +++ b/arch/arm/plat-s5p/irq-eint.c @@ -67,23 +67,23 @@ static int s5p_irq_eint_set_type(unsigned int irq, unsigned int type) switch (type) { case IRQ_TYPE_EDGE_RISING: - newvalue = S5P_EXTINT_RISEEDGE; + newvalue = S5P_IRQ_TYPE_EDGE_RISING; break; case IRQ_TYPE_EDGE_FALLING: - newvalue = S5P_EXTINT_FALLEDGE; + newvalue = S5P_IRQ_TYPE_EDGE_FALLING; break; case IRQ_TYPE_EDGE_BOTH: - newvalue = S5P_EXTINT_BOTHEDGE; + newvalue = S5P_IRQ_TYPE_EDGE_BOTH; break; case IRQ_TYPE_LEVEL_LOW: - newvalue = S5P_EXTINT_LOWLEV; + newvalue = S5P_IRQ_TYPE_LEVEL_LOW; break; case IRQ_TYPE_LEVEL_HIGH: - newvalue = S5P_EXTINT_HILEV; + newvalue = S5P_IRQ_TYPE_LEVEL_HIGH; break; default: diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c new file mode 100644 index 00000000000..0e5dc8cbf5e --- /dev/null +++ b/arch/arm/plat-s5p/irq-gpioint.c @@ -0,0 +1,237 @@ +/* linux/arch/arm/plat-s5p/irq-gpioint.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * Author: Kyungmin Park <kyungmin.park@samsung.com> + * Author: Joonyoung Shim <jy0922.shim@samsung.com> + * Author: Marek Szyprowski <m.szyprowski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <mach/map.h> +#include <plat/gpio-core.h> +#include <plat/gpio-cfg.h> + +#define S5P_GPIOREG(x) (S5P_VA_GPIO + (x)) + +#define GPIOINT_CON_OFFSET 0x700 +#define GPIOINT_MASK_OFFSET 0x900 +#define GPIOINT_PEND_OFFSET 0xA00 + +static struct s3c_gpio_chip *irq_chips[S5P_GPIOINT_GROUP_MAXNR]; + +static int s5p_gpioint_get_group(unsigned int irq) +{ + struct gpio_chip *chip = get_irq_data(irq); + struct s3c_gpio_chip *s3c_chip = container_of(chip, + struct s3c_gpio_chip, chip); + int group; + + for (group = 0; group < S5P_GPIOINT_GROUP_MAXNR; group++) + if (s3c_chip == irq_chips[group]) + break; + + return group; +} + +static int s5p_gpioint_get_offset(unsigned int irq) +{ + struct gpio_chip *chip = get_irq_data(irq); + struct s3c_gpio_chip *s3c_chip = container_of(chip, + struct s3c_gpio_chip, chip); + + return irq - s3c_chip->irq_base; +} + +static void s5p_gpioint_ack(unsigned int irq) +{ + int group, offset, pend_offset; + unsigned int value; + + group = s5p_gpioint_get_group(irq); + offset = s5p_gpioint_get_offset(irq); + pend_offset = group << 2; + + value = __raw_readl(S5P_GPIOREG(GPIOINT_PEND_OFFSET) + pend_offset); + value |= 1 << offset; + __raw_writel(value, S5P_GPIOREG(GPIOINT_PEND_OFFSET) + pend_offset); +} + +static void s5p_gpioint_mask(unsigned int irq) +{ + int group, offset, mask_offset; + unsigned int value; + + group = s5p_gpioint_get_group(irq); + offset = s5p_gpioint_get_offset(irq); + mask_offset = group << 2; + + value = __raw_readl(S5P_GPIOREG(GPIOINT_MASK_OFFSET) + mask_offset); + value |= 1 << offset; + __raw_writel(value, S5P_GPIOREG(GPIOINT_MASK_OFFSET) + mask_offset); +} + +static void s5p_gpioint_unmask(unsigned int irq) +{ + int group, offset, mask_offset; + unsigned int value; + + group = s5p_gpioint_get_group(irq); + offset = s5p_gpioint_get_offset(irq); + mask_offset = group << 2; + + value = __raw_readl(S5P_GPIOREG(GPIOINT_MASK_OFFSET) + mask_offset); + value &= ~(1 << offset); + __raw_writel(value, S5P_GPIOREG(GPIOINT_MASK_OFFSET) + mask_offset); +} + +static void s5p_gpioint_mask_ack(unsigned int irq) +{ + s5p_gpioint_mask(irq); + s5p_gpioint_ack(irq); +} + +static int s5p_gpioint_set_type(unsigned int irq, unsigned int type) +{ + int group, offset, con_offset; + unsigned int value; + + group = s5p_gpioint_get_group(irq); + offset = s5p_gpioint_get_offset(irq); + con_offset = group << 2; + + switch (type) { + case IRQ_TYPE_EDGE_RISING: + type = S5P_IRQ_TYPE_EDGE_RISING; + break; + case IRQ_TYPE_EDGE_FALLING: + type = S5P_IRQ_TYPE_EDGE_FALLING; + break; + case IRQ_TYPE_EDGE_BOTH: + type = S5P_IRQ_TYPE_EDGE_BOTH; + break; + case IRQ_TYPE_LEVEL_HIGH: + type = S5P_IRQ_TYPE_LEVEL_HIGH; + break; + case IRQ_TYPE_LEVEL_LOW: + type = S5P_IRQ_TYPE_LEVEL_LOW; + break; + case IRQ_TYPE_NONE: + default: + printk(KERN_WARNING "No irq type\n"); + return -EINVAL; + } + + value = __raw_readl(S5P_GPIOREG(GPIOINT_CON_OFFSET) + con_offset); + value &= ~(0x7 << (offset * 0x4)); + value |= (type << (offset * 0x4)); + __raw_writel(value, S5P_GPIOREG(GPIOINT_CON_OFFSET) + con_offset); + + return 0; +} + +struct irq_chip s5p_gpioint = { + .name = "s5p_gpioint", + .ack = s5p_gpioint_ack, + .mask = s5p_gpioint_mask, + .mask_ack = s5p_gpioint_mask_ack, + .unmask = s5p_gpioint_unmask, + .set_type = s5p_gpioint_set_type, +}; + +static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc) +{ + int group, offset, pend_offset, mask_offset; + int real_irq; + unsigned int pend, mask; + + for (group = 0; group < S5P_GPIOINT_GROUP_MAXNR; group++) { + pend_offset = group << 2; + pend = __raw_readl(S5P_GPIOREG(GPIOINT_PEND_OFFSET) + + pend_offset); + if (!pend) + continue; + + mask_offset = group << 2; + mask = __raw_readl(S5P_GPIOREG(GPIOINT_MASK_OFFSET) + + mask_offset); + pend &= ~mask; + + for (offset = 0; offset < 8; offset++) { + if (pend & (1 << offset)) { + struct s3c_gpio_chip *chip = irq_chips[group]; + if (chip) { + real_irq = chip->irq_base + offset; + generic_handle_irq(real_irq); + } + } + } + } +} + +static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) +{ + static int used_gpioint_groups = 0; + static bool handler_registered = 0; + int irq, group = chip->group; + int i; + + if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT) + return -ENOMEM; + + chip->irq_base = S5P_GPIOINT_BASE + + used_gpioint_groups * S5P_GPIOINT_GROUP_SIZE; + used_gpioint_groups++; + + if (!handler_registered) { + set_irq_chained_handler(IRQ_GPIOINT, s5p_gpioint_handler); + handler_registered = 1; + } + + irq_chips[group] = chip; + for (i = 0; i < chip->chip.ngpio; i++) { + irq = chip->irq_base + i; + set_irq_chip(irq, &s5p_gpioint); + set_irq_data(irq, &chip->chip); + set_irq_handler(irq, handle_level_irq); + set_irq_flags(irq, IRQF_VALID); + } + return 0; +} + +int __init s5p_register_gpio_interrupt(int pin) +{ + struct s3c_gpio_chip *my_chip = s3c_gpiolib_getchip(pin); + int offset, group; + int ret; + + if (!my_chip) + return -EINVAL; + + offset = pin - my_chip->chip.base; + group = my_chip->group; + + /* check if the group has been already registered */ + if (my_chip->irq_base) + return my_chip->irq_base + offset; + + /* register gpio group */ + ret = s5p_gpioint_add(my_chip); + if (ret == 0) { + my_chip->chip.to_irq = samsung_gpiolib_to_irq; + printk(KERN_INFO "Registered interrupt support for gpio group %d.\n", + group); + return my_chip->irq_base + offset; + } + return ret; +} diff --git a/arch/arm/plat-s5p/irq-pm.c b/arch/arm/plat-s5p/irq-pm.c new file mode 100644 index 00000000000..dc33b9ecda4 --- /dev/null +++ b/arch/arm/plat-s5p/irq-pm.c @@ -0,0 +1,93 @@ +/* linux/arch/arm/plat-s5p/irq-pm.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Based on arch/arm/plat-s3c24xx/irq-pm.c, + * Copyright (c) 2003,2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/sysdev.h> + +#include <plat/cpu.h> +#include <plat/irqs.h> +#include <plat/pm.h> +#include <mach/map.h> + +#include <mach/regs-gpio.h> +#include <mach/regs-irq.h> + +/* state for IRQs over sleep */ + +/* default is to allow for EINT0..EINT31, and IRQ_RTC_TIC, IRQ_RTC_ALARM, + * as wakeup sources + * + * set bit to 1 in allow bitfield to enable the wakeup settings on it +*/ + +unsigned long s3c_irqwake_intallow = 0x00000006L; +unsigned long s3c_irqwake_eintallow = 0xffffffffL; + +int s3c_irq_wake(unsigned int irqno, unsigned int state) +{ + unsigned long irqbit; + + switch (irqno) { + case IRQ_RTC_TIC: + case IRQ_RTC_ALARM: + irqbit = 1 << (irqno + 1 - IRQ_RTC_ALARM); + if (!state) + s3c_irqwake_intmask |= irqbit; + else + s3c_irqwake_intmask &= ~irqbit; + break; + default: + return -ENOENT; + } + return 0; +} + +static struct sleep_save eint_save[] = { + SAVE_ITEM(S5P_EINT_CON(0)), + SAVE_ITEM(S5P_EINT_CON(1)), + SAVE_ITEM(S5P_EINT_CON(2)), + SAVE_ITEM(S5P_EINT_CON(3)), + + SAVE_ITEM(S5P_EINT_FLTCON(0)), + SAVE_ITEM(S5P_EINT_FLTCON(1)), + SAVE_ITEM(S5P_EINT_FLTCON(2)), + SAVE_ITEM(S5P_EINT_FLTCON(3)), + SAVE_ITEM(S5P_EINT_FLTCON(4)), + SAVE_ITEM(S5P_EINT_FLTCON(5)), + SAVE_ITEM(S5P_EINT_FLTCON(6)), + SAVE_ITEM(S5P_EINT_FLTCON(7)), + + SAVE_ITEM(S5P_EINT_MASK(0)), + SAVE_ITEM(S5P_EINT_MASK(1)), + SAVE_ITEM(S5P_EINT_MASK(2)), + SAVE_ITEM(S5P_EINT_MASK(3)), +}; + +int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state) +{ + s3c_pm_do_save(eint_save, ARRAY_SIZE(eint_save)); + + return 0; +} + +int s3c24xx_irq_resume(struct sys_device *dev) +{ + s3c_pm_do_restore(eint_save, ARRAY_SIZE(eint_save)); + + return 0; +} + diff --git a/arch/arm/plat-s5p/pm.c b/arch/arm/plat-s5p/pm.c new file mode 100644 index 00000000000..d592b6304b4 --- /dev/null +++ b/arch/arm/plat-s5p/pm.c @@ -0,0 +1,52 @@ +/* linux/arch/arm/plat-s5p/pm.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P Power Manager (Suspend-To-RAM) support + * + * Based on arch/arm/plat-s3c24xx/pm.c + * Copyright (c) 2004,2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/suspend.h> +#include <plat/pm.h> + +#define PFX "s5p pm: " + +/* s3c_pm_check_resume_pin + * + * check to see if the pin is configured correctly for sleep mode, and + * make any necessary adjustments if it is not +*/ + +static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs) +{ + /* nothing here yet */ +} + +/* s3c_pm_configure_extint + * + * configure all external interrupt pins +*/ + +void s3c_pm_configure_extint(void) +{ + /* nothing here yet */ +} + +void s3c_pm_restore_core(void) +{ + /* nothing here yet */ +} + +void s3c_pm_save_core(void) +{ + /* nothing here yet */ +} + diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 7c0bde78116..dcd6eff4ee5 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -180,6 +180,31 @@ config S3C_DEV_I2C2 help Compile in platform device definitions for I2C channel 2 +config S3C_DEV_I2C3 + bool + help + Compile in platform device definition for I2C controller 3 + +config S3C_DEV_I2C4 + bool + help + Compile in platform device definition for I2C controller 4 + +config S3C_DEV_I2C5 + bool + help + Compile in platform device definition for I2C controller 5 + +config S3C_DEV_I2C6 + bool + help + Compile in platform device definition for I2C controller 6 + +config S3C_DEV_I2C7 + bool + help + Compile in platform device definition for I2C controller 7 + config S3C_DEV_FB bool help diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 4d8ff923207..afcce474af8 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -40,6 +40,11 @@ obj-$(CONFIG_S3C_DEV_HWMON) += dev-hwmon.o obj-y += dev-i2c0.o obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o obj-$(CONFIG_S3C_DEV_I2C2) += dev-i2c2.o +obj-$(CONFIG_S3C_DEV_I2C3) += dev-i2c3.o +obj-$(CONFIG_S3C_DEV_I2C4) += dev-i2c4.o +obj-$(CONFIG_S3C_DEV_I2C5) += dev-i2c5.o +obj-$(CONFIG_S3C_DEV_I2C6) += dev-i2c6.o +obj-$(CONFIG_S3C_DEV_I2C7) += dev-i2c7.o obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o obj-y += dev-uart.o obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o diff --git a/arch/arm/plat-samsung/dev-hsmmc.c b/arch/arm/plat-samsung/dev-hsmmc.c index 9d2be094141..db7a65c7f12 100644 --- a/arch/arm/plat-samsung/dev-hsmmc.c +++ b/arch/arm/plat-samsung/dev-hsmmc.c @@ -41,6 +41,7 @@ struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata = { .max_width = 4, .host_caps = (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), + .clk_type = S3C_SDHCI_CLK_DIV_INTERNAL, }; struct platform_device s3c_device_hsmmc0 = { @@ -59,17 +60,20 @@ void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd) { struct s3c_sdhci_platdata *set = &s3c_hsmmc0_def_platdata; - set->max_width = pd->max_width; set->cd_type = pd->cd_type; set->ext_cd_init = pd->ext_cd_init; set->ext_cd_cleanup = pd->ext_cd_cleanup; set->ext_cd_gpio = pd->ext_cd_gpio; set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert; + if (pd->max_width) + set->max_width = pd->max_width; if (pd->cfg_gpio) set->cfg_gpio = pd->cfg_gpio; if (pd->cfg_card) set->cfg_card = pd->cfg_card; if (pd->host_caps) - set->host_caps = pd->host_caps; + set->host_caps |= pd->host_caps; + if (pd->clk_type) + set->clk_type = pd->clk_type; } diff --git a/arch/arm/plat-samsung/dev-hsmmc1.c b/arch/arm/plat-samsung/dev-hsmmc1.c index a6c8295840a..2497321f08d 100644 --- a/arch/arm/plat-samsung/dev-hsmmc1.c +++ b/arch/arm/plat-samsung/dev-hsmmc1.c @@ -41,6 +41,7 @@ struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata = { .max_width = 4, .host_caps = (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), + .clk_type = S3C_SDHCI_CLK_DIV_INTERNAL, }; struct platform_device s3c_device_hsmmc1 = { @@ -59,17 +60,20 @@ void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd) { struct s3c_sdhci_platdata *set = &s3c_hsmmc1_def_platdata; - set->max_width = pd->max_width; set->cd_type = pd->cd_type; set->ext_cd_init = pd->ext_cd_init; set->ext_cd_cleanup = pd->ext_cd_cleanup; set->ext_cd_gpio = pd->ext_cd_gpio; set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert; + if (pd->max_width) + set->max_width = pd->max_width; if (pd->cfg_gpio) set->cfg_gpio = pd->cfg_gpio; if (pd->cfg_card) set->cfg_card = pd->cfg_card; if (pd->host_caps) - set->host_caps = pd->host_caps; + set->host_caps |= pd->host_caps; + if (pd->clk_type) + set->clk_type = pd->clk_type; } diff --git a/arch/arm/plat-samsung/dev-hsmmc2.c b/arch/arm/plat-samsung/dev-hsmmc2.c index cb0d7143381..f60aedba417 100644 --- a/arch/arm/plat-samsung/dev-hsmmc2.c +++ b/arch/arm/plat-samsung/dev-hsmmc2.c @@ -42,6 +42,7 @@ struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata = { .max_width = 4, .host_caps = (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), + .clk_type = S3C_SDHCI_CLK_DIV_INTERNAL, }; struct platform_device s3c_device_hsmmc2 = { @@ -60,17 +61,20 @@ void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd) { struct s3c_sdhci_platdata *set = &s3c_hsmmc2_def_platdata; - set->max_width = pd->max_width; set->cd_type = pd->cd_type; set->ext_cd_init = pd->ext_cd_init; set->ext_cd_cleanup = pd->ext_cd_cleanup; set->ext_cd_gpio = pd->ext_cd_gpio; set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert; + if (pd->max_width) + set->max_width = pd->max_width; if (pd->cfg_gpio) set->cfg_gpio = pd->cfg_gpio; if (pd->cfg_card) set->cfg_card = pd->cfg_card; if (pd->host_caps) - set->host_caps = pd->host_caps; + set->host_caps |= pd->host_caps; + if (pd->clk_type) + set->clk_type = pd->clk_type; } diff --git a/arch/arm/plat-samsung/dev-hsmmc3.c b/arch/arm/plat-samsung/dev-hsmmc3.c index 85aaf0f2842..ede776f20e6 100644 --- a/arch/arm/plat-samsung/dev-hsmmc3.c +++ b/arch/arm/plat-samsung/dev-hsmmc3.c @@ -33,8 +33,8 @@ static struct resource s3c_hsmmc3_resource[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_MMC3, - .end = IRQ_MMC3, + .start = IRQ_HSMMC3, + .end = IRQ_HSMMC3, .flags = IORESOURCE_IRQ, } }; @@ -45,6 +45,7 @@ struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata = { .max_width = 4, .host_caps = (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), + .clk_type = S3C_SDHCI_CLK_DIV_INTERNAL, }; struct platform_device s3c_device_hsmmc3 = { @@ -63,15 +64,20 @@ void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd) { struct s3c_sdhci_platdata *set = &s3c_hsmmc3_def_platdata; - set->max_width = pd->max_width; set->cd_type = pd->cd_type; set->ext_cd_init = pd->ext_cd_init; set->ext_cd_cleanup = pd->ext_cd_cleanup; set->ext_cd_gpio = pd->ext_cd_gpio; set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert; + if (pd->max_width) + set->max_width = pd->max_width; if (pd->cfg_gpio) set->cfg_gpio = pd->cfg_gpio; if (pd->cfg_card) set->cfg_card = pd->cfg_card; + if (pd->host_caps) + set->host_caps |= pd->host_caps; + if (pd->clk_type) + set->clk_type = pd->clk_type; } diff --git a/arch/arm/plat-samsung/dev-i2c2.c b/arch/arm/plat-samsung/dev-i2c2.c index 07036dee09e..ff4ba69b683 100644 --- a/arch/arm/plat-samsung/dev-i2c2.c +++ b/arch/arm/plat-samsung/dev-i2c2.c @@ -32,8 +32,8 @@ static struct resource s3c_i2c_resource[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_CAN0, - .end = IRQ_CAN0, + .start = IRQ_IIC2, + .end = IRQ_IIC2, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/plat-samsung/dev-i2c3.c b/arch/arm/plat-samsung/dev-i2c3.c new file mode 100644 index 00000000000..8586a10014b --- /dev/null +++ b/arch/arm/plat-samsung/dev-i2c3.c @@ -0,0 +1,68 @@ +/* linux/arch/arm/plat-samsung/dev-i2c3.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P series device definition for i2c device 3 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/gfp.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> + +#include <mach/irqs.h> +#include <mach/map.h> + +#include <plat/regs-iic.h> +#include <plat/iic.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +static struct resource s3c_i2c_resource[] = { + [0] = { + .start = S3C_PA_IIC3, + .end = S3C_PA_IIC3 + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IIC3, + .end = IRQ_IIC3, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device s3c_device_i2c3 = { + .name = "s3c2440-i2c", + .id = 3, + .num_resources = ARRAY_SIZE(s3c_i2c_resource), + .resource = s3c_i2c_resource, +}; + +static struct s3c2410_platform_i2c default_i2c_data3 __initdata = { + .flags = 0, + .bus_num = 3, + .slave_addr = 0x10, + .frequency = 100*1000, + .sda_delay = 100, +}; + +void __init s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *pd) +{ + struct s3c2410_platform_i2c *npd; + + if (!pd) + pd = &default_i2c_data3; + + npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL); + if (!npd) + printk(KERN_ERR "%s: no memory for platform data\n", __func__); + else if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c3_cfg_gpio; + + s3c_device_i2c3.dev.platform_data = npd; +} diff --git a/arch/arm/plat-samsung/dev-i2c4.c b/arch/arm/plat-samsung/dev-i2c4.c new file mode 100644 index 00000000000..df2159e2daa --- /dev/null +++ b/arch/arm/plat-samsung/dev-i2c4.c @@ -0,0 +1,68 @@ +/* linux/arch/arm/plat-samsung/dev-i2c4.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P series device definition for i2c device 3 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/gfp.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> + +#include <mach/irqs.h> +#include <mach/map.h> + +#include <plat/regs-iic.h> +#include <plat/iic.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +static struct resource s3c_i2c_resource[] = { + [0] = { + .start = S3C_PA_IIC4, + .end = S3C_PA_IIC4 + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IIC4, + .end = IRQ_IIC4, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device s3c_device_i2c4 = { + .name = "s3c2440-i2c", + .id = 4, + .num_resources = ARRAY_SIZE(s3c_i2c_resource), + .resource = s3c_i2c_resource, +}; + +static struct s3c2410_platform_i2c default_i2c_data4 __initdata = { + .flags = 0, + .bus_num = 4, + .slave_addr = 0x10, + .frequency = 100*1000, + .sda_delay = 100, +}; + +void __init s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *pd) +{ + struct s3c2410_platform_i2c *npd; + + if (!pd) + pd = &default_i2c_data4; + + npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL); + if (!npd) + printk(KERN_ERR "%s: no memory for platform data\n", __func__); + else if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c4_cfg_gpio; + + s3c_device_i2c4.dev.platform_data = npd; +} diff --git a/arch/arm/plat-samsung/dev-i2c5.c b/arch/arm/plat-samsung/dev-i2c5.c new file mode 100644 index 00000000000..0499c2c3877 --- /dev/null +++ b/arch/arm/plat-samsung/dev-i2c5.c @@ -0,0 +1,68 @@ +/* linux/arch/arm/plat-samsung/dev-i2c3.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P series device definition for i2c device 3 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/gfp.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> + +#include <mach/irqs.h> +#include <mach/map.h> + +#include <plat/regs-iic.h> +#include <plat/iic.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +static struct resource s3c_i2c_resource[] = { + [0] = { + .start = S3C_PA_IIC5, + .end = S3C_PA_IIC5 + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IIC5, + .end = IRQ_IIC5, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device s3c_device_i2c5 = { + .name = "s3c2440-i2c", + .id = 5, + .num_resources = ARRAY_SIZE(s3c_i2c_resource), + .resource = s3c_i2c_resource, +}; + +static struct s3c2410_platform_i2c default_i2c_data5 __initdata = { + .flags = 0, + .bus_num = 5, + .slave_addr = 0x10, + .frequency = 100*1000, + .sda_delay = 100, +}; + +void __init s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *pd) +{ + struct s3c2410_platform_i2c *npd; + + if (!pd) + pd = &default_i2c_data5; + + npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL); + if (!npd) + printk(KERN_ERR "%s: no memory for platform data\n", __func__); + else if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c5_cfg_gpio; + + s3c_device_i2c5.dev.platform_data = npd; +} diff --git a/arch/arm/plat-samsung/dev-i2c6.c b/arch/arm/plat-samsung/dev-i2c6.c new file mode 100644 index 00000000000..4083108908a --- /dev/null +++ b/arch/arm/plat-samsung/dev-i2c6.c @@ -0,0 +1,68 @@ +/* linux/arch/arm/plat-samsung/dev-i2c6.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P series device definition for i2c device 6 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/gfp.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> + +#include <mach/irqs.h> +#include <mach/map.h> + +#include <plat/regs-iic.h> +#include <plat/iic.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +static struct resource s3c_i2c_resource[] = { + [0] = { + .start = S3C_PA_IIC6, + .end = S3C_PA_IIC6 + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IIC6, + .end = IRQ_IIC6, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device s3c_device_i2c6 = { + .name = "s3c2440-i2c", + .id = 6, + .num_resources = ARRAY_SIZE(s3c_i2c_resource), + .resource = s3c_i2c_resource, +}; + +static struct s3c2410_platform_i2c default_i2c_data6 __initdata = { + .flags = 0, + .bus_num = 6, + .slave_addr = 0x10, + .frequency = 100*1000, + .sda_delay = 100, +}; + +void __init s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *pd) +{ + struct s3c2410_platform_i2c *npd; + + if (!pd) + pd = &default_i2c_data6; + + npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL); + if (!npd) + printk(KERN_ERR "%s: no memory for platform data\n", __func__); + else if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c6_cfg_gpio; + + s3c_device_i2c6.dev.platform_data = npd; +} diff --git a/arch/arm/plat-samsung/dev-i2c7.c b/arch/arm/plat-samsung/dev-i2c7.c new file mode 100644 index 00000000000..1182451d7dc --- /dev/null +++ b/arch/arm/plat-samsung/dev-i2c7.c @@ -0,0 +1,68 @@ +/* linux/arch/arm/plat-samsung/dev-i2c7.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P series device definition for i2c device 7 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/gfp.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> + +#include <mach/irqs.h> +#include <mach/map.h> + +#include <plat/regs-iic.h> +#include <plat/iic.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +static struct resource s3c_i2c_resource[] = { + [0] = { + .start = S3C_PA_IIC7, + .end = S3C_PA_IIC7 + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IIC7, + .end = IRQ_IIC7, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device s3c_device_i2c7 = { + .name = "s3c2440-i2c", + .id = 7, + .num_resources = ARRAY_SIZE(s3c_i2c_resource), + .resource = s3c_i2c_resource, +}; + +static struct s3c2410_platform_i2c default_i2c_data7 __initdata = { + .flags = 0, + .bus_num = 7, + .slave_addr = 0x10, + .frequency = 100*1000, + .sda_delay = 100, +}; + +void __init s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *pd) +{ + struct s3c2410_platform_i2c *npd; + + if (!pd) + pd = &default_i2c_data7; + + npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL); + if (!npd) + printk(KERN_ERR "%s: no memory for platform data\n", __func__); + else if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c7_cfg_gpio; + + s3c_device_i2c7.dev.platform_data = npd; +} diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c index e3d41eaed1f..b732b773b9a 100644 --- a/arch/arm/plat-samsung/gpio-config.c +++ b/arch/arm/plat-samsung/gpio-config.c @@ -41,6 +41,37 @@ int s3c_gpio_cfgpin(unsigned int pin, unsigned int config) } EXPORT_SYMBOL(s3c_gpio_cfgpin); +int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr, + unsigned int cfg) +{ + int ret; + + for (; nr > 0; nr--, start++) { + ret = s3c_gpio_cfgpin(start, cfg); + if (ret != 0) + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(s3c_gpio_cfgpin_range); + +int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr, + unsigned int cfg, s3c_gpio_pull_t pull) +{ + int ret; + + for (; nr > 0; nr--, start++) { + s3c_gpio_setpull(start, pull); + ret = s3c_gpio_cfgpin(start, cfg); + if (ret != 0) + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range); + unsigned s3c_gpio_getcfg(unsigned int pin) { struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); @@ -80,6 +111,25 @@ int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull) } EXPORT_SYMBOL(s3c_gpio_setpull); +s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin) +{ + struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); + unsigned long flags; + int offset; + u32 pup = 0; + + if (chip) { + offset = pin - chip->chip.base; + + s3c_gpio_lock(chip, flags); + pup = s3c_gpio_do_getpull(chip, offset); + s3c_gpio_unlock(chip, flags); + } + + return (__force s3c_gpio_pull_t)pup; +} +EXPORT_SYMBOL(s3c_gpio_getpull); + #ifdef CONFIG_S3C_GPIO_CFG_S3C24XX int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip, unsigned int off, unsigned int cfg) diff --git a/arch/arm/plat-samsung/gpio.c b/arch/arm/plat-samsung/gpio.c index b83a83351ce..7743c4b8b2f 100644 --- a/arch/arm/plat-samsung/gpio.c +++ b/arch/arm/plat-samsung/gpio.c @@ -157,3 +157,11 @@ __init void s3c_gpiolib_add(struct s3c_gpio_chip *chip) if (ret >= 0) s3c_gpiolib_track(chip); } + +int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset) +{ + struct s3c_gpio_chip *s3c_chip = container_of(chip, + struct s3c_gpio_chip, chip); + + return s3c_chip->irq_base + offset; +} diff --git a/arch/arm/plat-samsung/include/plat/audio.h b/arch/arm/plat-samsung/include/plat/audio.h index e32f9edfd4b..7712ff6336f 100644 --- a/arch/arm/plat-samsung/include/plat/audio.h +++ b/arch/arm/plat-samsung/include/plat/audio.h @@ -16,6 +16,15 @@ #define S3C64XX_AC97_GPE 1 extern void s3c64xx_ac97_setup_gpio(int); +/* + * The machine init code calls s5p*_spdif_setup_gpio with + * one of these defines in order to select appropriate bank + * of GPIO for S/PDIF pins + */ +#define S5PC100_SPDIF_GPD 0 +#define S5PC100_SPDIF_GPG3 1 +extern void s5pc100_spdif_setup_gpio(int); + /** * struct s3c_audio_pdata - common platform data for audio device drivers * @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index c8b94279bad..2d82a6cb144 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -48,6 +48,11 @@ extern struct platform_device s3c_device_wdt; extern struct platform_device s3c_device_i2c0; extern struct platform_device s3c_device_i2c1; extern struct platform_device s3c_device_i2c2; +extern struct platform_device s3c_device_i2c3; +extern struct platform_device s3c_device_i2c4; +extern struct platform_device s3c_device_i2c5; +extern struct platform_device s3c_device_i2c6; +extern struct platform_device s3c_device_i2c7; extern struct platform_device s3c_device_rtc; extern struct platform_device s3c_device_adc; extern struct platform_device s3c_device_sdi; @@ -89,6 +94,7 @@ extern struct platform_device s5pv210_device_pcm2; extern struct platform_device s5pv210_device_iis0; extern struct platform_device s5pv210_device_iis1; extern struct platform_device s5pv210_device_iis2; +extern struct platform_device s5pv210_device_spdif; extern struct platform_device s5p6442_device_pcm0; extern struct platform_device s5p6442_device_pcm1; @@ -108,6 +114,7 @@ extern struct platform_device s5pc100_device_pcm1; extern struct platform_device s5pc100_device_iis0; extern struct platform_device s5pc100_device_iis1; extern struct platform_device s5pc100_device_iis2; +extern struct platform_device s5pc100_device_spdif; extern struct platform_device samsung_device_keypad; diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h index 3e21c75feef..8fd65d8b586 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h @@ -42,6 +42,12 @@ static inline int s3c_gpio_do_setpull(struct s3c_gpio_chip *chip, return (chip->config->set_pull)(chip, off, pull); } +static inline s3c_gpio_pull_t s3c_gpio_do_getpull(struct s3c_gpio_chip *chip, + unsigned int off) +{ + return chip->config->get_pull(chip, off); +} + /** * s3c_gpio_setcfg_s3c24xx - S3C24XX style GPIO configuration. * @chip: The gpio chip that is being configured. diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index 1c6b92947c5..e4b5cf126fa 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -108,6 +108,19 @@ extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to); */ extern unsigned s3c_gpio_getcfg(unsigned int pin); +/** + * s3c_gpio_cfgpin_range() - Change the GPIO function for configuring pin range + * @start: The pin number to start at + * @nr: The number of pins to configure from @start. + * @cfg: The configuration for the pin's function + * + * Call s3c_gpio_cfgpin() for the @nr pins starting at @start. + * + * @sa s3c_gpio_cfgpin. + */ +extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr, + unsigned int cfg); + /* Define values for the pull-{up,down} available for each gpio pin. * * These values control the state of the weak pull-{up,down} resistors @@ -140,6 +153,31 @@ extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull); */ extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin); +/* configure `all` aspects of an gpio */ + +/** + * s3c_gpio_cfgall_range() - configure range of gpio functtion and pull. + * @start: The gpio number to start at. + * @nr: The number of gpio to configure from @start. + * @cfg: The configuration to use + * @pull: The pull setting to use. + * + * Run s3c_gpio_cfgpin() and s3c_gpio_setpull() over the gpio range starting + * @gpio and running for @size. + * + * @sa s3c_gpio_cfgpin + * @sa s3c_gpio_setpull + * @sa s3c_gpio_cfgpin_range + */ +extern int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr, + unsigned int cfg, s3c_gpio_pull_t pull); + +static inline int s3c_gpio_cfgrange_nopull(unsigned int pin, unsigned int size, + unsigned int cfg) +{ + return s3c_gpio_cfgall_range(pin, size, cfg, S3C_GPIO_PULL_NONE); +} + /* Define values for the drvstr available for each gpio pin. * * These values control the value of the output signal driver strength, @@ -169,4 +207,22 @@ extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin); */ extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr); +/** + * s5p_register_gpio_interrupt() - register interrupt support for a gpio group + * @pin: The pin number from the group to be registered + * + * This function registers gpio interrupt support for the group that the + * specified pin belongs to. + * + * The total number of gpio pins is quite large ob s5p series. Registering + * irq support for all of them would be a resource waste. Because of that the + * interrupt support for standard gpio pins is registered dynamically. + * + * It will return the irq number of the interrupt that has been registered + * or -ENOMEM if no more gpio interrupts can be registered. It is allowed + * to call this function more than once for the same gpio group (the group + * will be registered only once). + */ +extern int s5p_register_gpio_interrupt(int pin); + #endif /* __PLAT_GPIO_CFG_H */ diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h index e358c7da848..13a22b8861e 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-core.h +++ b/arch/arm/plat-samsung/include/plat/gpio-core.h @@ -43,6 +43,8 @@ struct s3c_gpio_cfg; * struct s3c_gpio_chip - wrapper for specific implementation of gpio * @chip: The chip structure to be exported via gpiolib. * @base: The base pointer to the gpio configuration registers. + * @group: The group register number for gpio interrupt support. + * @irq_base: The base irq number. * @config: special function and pull-resistor control information. * @lock: Lock for exclusive access to this gpio bank. * @pm_save: Save information for suspend/resume support. @@ -63,6 +65,8 @@ struct s3c_gpio_chip { struct s3c_gpio_cfg *config; struct s3c_gpio_pm *pm; void __iomem *base; + int irq_base; + int group; spinlock_t lock; #ifdef CONFIG_PM u32 pm_save[4]; @@ -118,6 +122,17 @@ extern void samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip, extern void samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip); extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip); + +/** + * samsung_gpiolib_to_irq - convert gpio pin to irq number + * @chip: The gpio chip that the pin belongs to. + * @offset: The offset of the pin in the chip. + * + * This helper returns the irq number calculated from the chip->irq_base and + * the provided offset. + */ +extern int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset); + /* exported for core SoC support to change */ extern struct s3c_gpio_cfg s3c24xx_gpiocfg_default; diff --git a/arch/arm/plat-samsung/include/plat/iic.h b/arch/arm/plat-samsung/include/plat/iic.h index 133308bf595..1543da8f85c 100644 --- a/arch/arm/plat-samsung/include/plat/iic.h +++ b/arch/arm/plat-samsung/include/plat/iic.h @@ -55,10 +55,20 @@ struct s3c2410_platform_i2c { extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c); extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c); extern void s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *i2c); /* defined by architecture to configure gpio */ extern void s3c_i2c0_cfg_gpio(struct platform_device *dev); extern void s3c_i2c1_cfg_gpio(struct platform_device *dev); extern void s3c_i2c2_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c3_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c4_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c5_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c6_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c7_cfg_gpio(struct platform_device *dev); #endif /* __ASM_ARCH_IIC_H */ diff --git a/arch/arm/plat-samsung/include/plat/map-base.h b/arch/arm/plat-samsung/include/plat/map-base.h index 250be311c85..3ffac4d2e4f 100644 --- a/arch/arm/plat-samsung/include/plat/map-base.h +++ b/arch/arm/plat-samsung/include/plat/map-base.h @@ -14,7 +14,7 @@ #ifndef __ASM_PLAT_MAP_H #define __ASM_PLAT_MAP_H __FILE__ -/* Fit all our registers in at 0xF4000000 upwards, trying to use as +/* Fit all our registers in at 0xF6000000 upwards, trying to use as * little of the VA space as possible so vmalloc and friends have a * better chance of getting memory. * @@ -22,7 +22,7 @@ * an single MOVS instruction (ie, only 8 bits of set data) */ -#define S3C_ADDR_BASE (0xF4000000) +#define S3C_ADDR_BASE 0xF6000000 #ifndef __ASSEMBLY__ #define S3C_ADDR(x) ((void __iomem __force *)S3C_ADDR_BASE + (x)) diff --git a/arch/arm/plat-samsung/include/plat/nand-core.h b/arch/arm/plat-samsung/include/plat/nand-core.h new file mode 100644 index 00000000000..6de20789a95 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/nand-core.h @@ -0,0 +1,28 @@ +/* arch/arm/plat-samsung/include/plat/nand-core.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S3C - Nand Controller core functions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_NAND_CORE_H +#define __ASM_ARCH_NAND_CORE_H __FILE__ + +/* These functions are only for use with the core support code, such as + * the cpu specific initialisation code + */ + +/* re-define device name depending on support. */ +static inline void s3c_nand_setname(char *name) +{ +#ifdef CONFIG_S3C_DEV_NAND + s3c_device_nand.name = name; +#endif +} + +#endif /* __ASM_ARCH_NAND_CORE_H */ diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index 30844c263d0..85853f8c4c5 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -28,11 +28,17 @@ enum cd_types { S3C_SDHCI_CD_PERMANENT, /* no CD line, card permanently wired to host */ }; +enum clk_types { + S3C_SDHCI_CLK_DIV_INTERNAL, /* use mmc internal clock divider */ + S3C_SDHCI_CLK_DIV_EXTERNAL, /* use external clock divider */ +}; + /** * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI * @max_width: The maximum number of data bits supported. * @host_caps: Standard MMC host capabilities bit field. * @cd_type: Type of Card Detection method (see cd_types enum above) + * @clk_type: Type of clock divider method (see clk_types enum above) * @ext_cd_init: Initialize external card detect subsystem. Called on * sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL. * notify_func argument is a callback to the sdhci-s3c driver @@ -59,6 +65,7 @@ struct s3c_sdhci_platdata { unsigned int max_width; unsigned int host_caps; enum cd_types cd_type; + enum clk_types clk_type; char **clocks; /* set of clock sources */ @@ -110,6 +117,10 @@ extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w); extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w); extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w); extern void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *, int w); +extern void s5pv310_setup_sdhci0_cfg_gpio(struct platform_device *, int w); +extern void s5pv310_setup_sdhci1_cfg_gpio(struct platform_device *, int w); +extern void s5pv310_setup_sdhci2_cfg_gpio(struct platform_device *, int w); +extern void s5pv310_setup_sdhci3_cfg_gpio(struct platform_device *, int w); /* S3C64XX SDHCI setup */ @@ -288,4 +299,57 @@ static inline void s5pv210_default_sdhci3(void) { } #endif /* CONFIG_S5PV210_SETUP_SDHCI */ +/* S5PV310 SDHCI setup */ +#ifdef CONFIG_S5PV310_SETUP_SDHCI +extern char *s5pv310_hsmmc_clksrcs[4]; + +extern void s5pv310_setup_sdhci_cfg_card(struct platform_device *dev, + void __iomem *r, + struct mmc_ios *ios, + struct mmc_card *card); + +static inline void s5pv310_default_sdhci0(void) +{ +#ifdef CONFIG_S3C_DEV_HSMMC + s3c_hsmmc0_def_platdata.clocks = s5pv310_hsmmc_clksrcs; + s3c_hsmmc0_def_platdata.cfg_gpio = s5pv310_setup_sdhci0_cfg_gpio; + s3c_hsmmc0_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card; +#endif +} + +static inline void s5pv310_default_sdhci1(void) +{ +#ifdef CONFIG_S3C_DEV_HSMMC1 + s3c_hsmmc1_def_platdata.clocks = s5pv310_hsmmc_clksrcs; + s3c_hsmmc1_def_platdata.cfg_gpio = s5pv310_setup_sdhci1_cfg_gpio; + s3c_hsmmc1_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card; +#endif +} + +static inline void s5pv310_default_sdhci2(void) +{ +#ifdef CONFIG_S3C_DEV_HSMMC2 + s3c_hsmmc2_def_platdata.clocks = s5pv310_hsmmc_clksrcs; + s3c_hsmmc2_def_platdata.cfg_gpio = s5pv310_setup_sdhci2_cfg_gpio; + s3c_hsmmc2_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card; +#endif +} + +static inline void s5pv310_default_sdhci3(void) +{ +#ifdef CONFIG_S3C_DEV_HSMMC3 + s3c_hsmmc3_def_platdata.clocks = s5pv310_hsmmc_clksrcs; + s3c_hsmmc3_def_platdata.cfg_gpio = s5pv310_setup_sdhci3_cfg_gpio; + s3c_hsmmc3_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card; +#endif +} + +#else +static inline void s5pv310_default_sdhci0(void) { } +static inline void s5pv310_default_sdhci1(void) { } +static inline void s5pv310_default_sdhci2(void) { } +static inline void s5pv310_default_sdhci3(void) { } + +#endif /* CONFIG_S5PV310_SETUP_SDHCI */ + #endif /* __PLAT_S3C_SDHCI_H */ diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c index 7df03f87fbf..96528200eb7 100644 --- a/arch/arm/plat-samsung/pm-gpio.c +++ b/arch/arm/plat-samsung/pm-gpio.c @@ -192,7 +192,7 @@ struct s3c_gpio_pm s3c_gpio_pm_2bit = { .resume = s3c_gpio_pm_2bit_resume, }; -#ifdef CONFIG_ARCH_S3C64XX +#if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P) static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip) { chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON); @@ -302,7 +302,7 @@ struct s3c_gpio_pm s3c_gpio_pm_4bit = { .save = s3c_gpio_pm_4bit_save, .resume = s3c_gpio_pm_4bit_resume, }; -#endif /* CONFIG_ARCH_S3C64XX */ +#endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P */ /** * s3c_pm_save_gpio() - save gpio chip data for suspend diff --git a/arch/arm/plat-samsung/s3c-pl330.c b/arch/arm/plat-samsung/s3c-pl330.c index a91305a60ae..b4ff8d74ac4 100644 --- a/arch/arm/plat-samsung/s3c-pl330.c +++ b/arch/arm/plat-samsung/s3c-pl330.c @@ -15,6 +15,8 @@ #include <linux/io.h> #include <linux/slab.h> #include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/err.h> #include <asm/hardware/pl330.h> @@ -27,6 +29,7 @@ * @node: To attach to the global list of DMACs. * @pi: PL330 configuration info for the DMAC. * @kmcache: Pool to quickly allocate xfers for all channels in the dmac. + * @clk: Pointer of DMAC operation clock. */ struct s3c_pl330_dmac { unsigned busy_chan; @@ -34,6 +37,7 @@ struct s3c_pl330_dmac { struct list_head node; struct pl330_info *pi; struct kmem_cache *kmcache; + struct clk *clk; }; /** @@ -1072,16 +1076,25 @@ static int pl330_probe(struct platform_device *pdev) if (ret) goto probe_err4; - ret = pl330_add(pl330_info); - if (ret) - goto probe_err5; - /* Allocate a new DMAC */ s3c_pl330_dmac = kmalloc(sizeof(*s3c_pl330_dmac), GFP_KERNEL); if (!s3c_pl330_dmac) { ret = -ENOMEM; + goto probe_err5; + } + + /* Get operation clock and enable it */ + s3c_pl330_dmac->clk = clk_get(&pdev->dev, "pdma"); + if (IS_ERR(s3c_pl330_dmac->clk)) { + dev_err(&pdev->dev, "Cannot get operation clock.\n"); + ret = -EINVAL; goto probe_err6; } + clk_enable(s3c_pl330_dmac->clk); + + ret = pl330_add(pl330_info); + if (ret) + goto probe_err7; /* Hook the info */ s3c_pl330_dmac->pi = pl330_info; @@ -1094,7 +1107,7 @@ static int pl330_probe(struct platform_device *pdev) if (!s3c_pl330_dmac->kmcache) { ret = -ENOMEM; - goto probe_err7; + goto probe_err8; } /* Get the list of peripherals */ @@ -1120,10 +1133,13 @@ static int pl330_probe(struct platform_device *pdev) return 0; +probe_err8: + pl330_del(pl330_info); probe_err7: - kfree(s3c_pl330_dmac); + clk_disable(s3c_pl330_dmac->clk); + clk_put(s3c_pl330_dmac->clk); probe_err6: - pl330_del(pl330_info); + kfree(s3c_pl330_dmac); probe_err5: free_irq(irq, pl330_info); probe_err4: @@ -1188,6 +1204,10 @@ static int pl330_remove(struct platform_device *pdev) } } + /* Disable operation clock */ + clk_disable(dmac->clk); + clk_put(dmac->clk); + /* Remove the DMAC */ list_del(&dmac->node); kfree(dmac); |