diff options
| -rw-r--r-- | include/sound/wm8962.h | 6 | ||||
| -rw-r--r-- | sound/soc/codecs/wm8962.c | 18 |
2 files changed, 24 insertions, 0 deletions
diff --git a/include/sound/wm8962.h b/include/sound/wm8962.h index 1750bed7c2f..79e6d427b85 100644 --- a/include/sound/wm8962.h +++ b/include/sound/wm8962.h @@ -49,6 +49,12 @@ struct wm8962_pdata { bool irq_active_low; bool spk_mono; /* Speaker outputs tied together as mono */ + + /** + * This flag should be set if one or both IN4 inputs is wired + * in a DC measurement configuration. + */ + bool in4_dc_measure; }; #endif diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index cc4049e9174..2a654fd42d1 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -3638,6 +3638,13 @@ static struct snd_soc_codec_driver soc_codec_dev_wm8962 = { .volatile_register = wm8962_soc_volatile, }; +/* Improve power consumption for IN4 DC measurement mode */ +static const struct reg_default wm8962_dc_measure[] = { + { 0xfd, 0x1 }, + { 0xcc, 0x40 }, + { 0xfd, 0 }, +}; + static const struct regmap_config wm8962_regmap = { .reg_bits = 16, .val_bits = 16, @@ -3653,6 +3660,7 @@ static const struct regmap_config wm8962_regmap = { static __devinit int wm8962_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { + struct wm8962_pdata *pdata = dev_get_platdata(&i2c->dev); struct wm8962_priv *wm8962; unsigned int reg; int ret, i; @@ -3731,6 +3739,16 @@ static __devinit int wm8962_i2c_probe(struct i2c_client *i2c, goto err_regmap; } + if (pdata && pdata->in4_dc_measure) { + ret = regmap_register_patch(wm8962->regmap, + wm8962_dc_measure, + ARRAY_SIZE(wm8962_dc_measure)); + if (ret != 0) + dev_err(&i2c->dev, + "Failed to configure for DC mesurement: %d\n", + ret); + } + regcache_cache_only(wm8962->regmap, true); ret = snd_soc_register_codec(&i2c->dev, |