diff options
| -rw-r--r-- | drivers/regulator/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/regulator/Makefile | 1 | ||||
| -rw-r--r-- | drivers/regulator/qcom_rpm-regulator.c | 19 | ||||
| -rw-r--r-- | drivers/regulator/rn5t618-regulator.c | 51 | ||||
| -rw-r--r-- | drivers/regulator/rt5033-regulator.c | 123 | ||||
| -rw-r--r-- | drivers/regulator/s2mpa01.c | 2 | ||||
| -rw-r--r-- | drivers/regulator/s2mps11.c | 2 |
7 files changed, 157 insertions, 49 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 55d7b7b0f2e..8558e1b21f0 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -521,6 +521,14 @@ config REGULATOR_RN5T618 help Say y here to support the regulators found on Ricoh RN5T618 PMIC. +config REGULATOR_RT5033 + tristate "Richtek RT5033 Regulators" + depends on MFD_RT5033 + help + This adds support for voltage and current regulators in Richtek + RT5033 PMIC. The device supports multiple regulators like + current source, LDO and Buck. + config REGULATOR_S2MPA01 tristate "Samsung S2MPA01 voltage regulator" depends on MFD_SEC_CORE diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 1029ed39c51..1f28ebfc6f3 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -69,6 +69,7 @@ obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o obj-$(CONFIG_REGULATOR_RC5T583) += rc5t583-regulator.o obj-$(CONFIG_REGULATOR_RK808) += rk808-regulator.o obj-$(CONFIG_REGULATOR_RN5T618) += rn5t618-regulator.o +obj-$(CONFIG_REGULATOR_RT5033) += rt5033-regulator.o obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o diff --git a/drivers/regulator/qcom_rpm-regulator.c b/drivers/regulator/qcom_rpm-regulator.c index dabd28a359d..183598b111f 100644 --- a/drivers/regulator/qcom_rpm-regulator.c +++ b/drivers/regulator/qcom_rpm-regulator.c @@ -183,6 +183,13 @@ static const struct regulator_linear_range ftsmps_ranges[] = { REGULATOR_LINEAR_RANGE(1500000, 64, 100, 50000), }; +static const struct regulator_linear_range smb208_ranges[] = { + REGULATOR_LINEAR_RANGE( 375000, 0, 29, 12500), + REGULATOR_LINEAR_RANGE( 750000, 30, 89, 12500), + REGULATOR_LINEAR_RANGE(1500000, 90, 153, 25000), + REGULATOR_LINEAR_RANGE(3100000, 154, 234, 25000), +}; + static const struct regulator_linear_range ncp_ranges[] = { REGULATOR_LINEAR_RANGE(1500000, 0, 31, 50000), }; @@ -559,6 +566,16 @@ static const struct qcom_rpm_reg pm8921_switch = { .parts = &rpm8960_switch_parts, }; +static const struct qcom_rpm_reg smb208_smps = { + .desc.linear_ranges = smb208_ranges, + .desc.n_linear_ranges = ARRAY_SIZE(smb208_ranges), + .desc.n_voltages = 235, + .desc.ops = &uV_ops, + .parts = &rpm8960_smps_parts, + .supports_force_mode_auto = false, + .supports_force_mode_bypass = false, +}; + static const struct of_device_id rpm_of_match[] = { { .compatible = "qcom,rpm-pm8058-pldo", .data = &pm8058_pldo }, { .compatible = "qcom,rpm-pm8058-nldo", .data = &pm8058_nldo }, @@ -578,6 +595,8 @@ static const struct of_device_id rpm_of_match[] = { { .compatible = "qcom,rpm-pm8921-ftsmps", .data = &pm8921_ftsmps }, { .compatible = "qcom,rpm-pm8921-ncp", .data = &pm8921_ncp }, { .compatible = "qcom,rpm-pm8921-switch", .data = &pm8921_switch }, + + { .compatible = "qcom,rpm-smb208", .data = &smb208_smps }, { } }; MODULE_DEVICE_TABLE(of, rpm_of_match); diff --git a/drivers/regulator/rn5t618-regulator.c b/drivers/regulator/rn5t618-regulator.c index e58d79aeb39..b85ceb8ff91 100644 --- a/drivers/regulator/rn5t618-regulator.c +++ b/drivers/regulator/rn5t618-regulator.c @@ -31,6 +31,8 @@ static struct regulator_ops rn5t618_reg_ops = { #define REG(rid, ereg, emask, vreg, vmask, min, max, step) \ [RN5T618_##rid] = { \ .name = #rid, \ + .of_match = of_match_ptr(#rid), \ + .regulators_node = of_match_ptr("regulators"), \ .id = RN5T618_##rid, \ .type = REGULATOR_VOLTAGE, \ .owner = THIS_MODULE, \ @@ -60,60 +62,15 @@ static struct regulator_desc rn5t618_regulators[] = { REG(LDORTC2, LDOEN2, BIT(5), LDORTC2DAC, 0x7f, 900000, 3500000, 25000), }; -static struct of_regulator_match rn5t618_matches[] = { - [RN5T618_DCDC1] = { .name = "DCDC1" }, - [RN5T618_DCDC2] = { .name = "DCDC2" }, - [RN5T618_DCDC3] = { .name = "DCDC3" }, - [RN5T618_LDO1] = { .name = "LDO1" }, - [RN5T618_LDO2] = { .name = "LDO2" }, - [RN5T618_LDO3] = { .name = "LDO3" }, - [RN5T618_LDO4] = { .name = "LDO4" }, - [RN5T618_LDO5] = { .name = "LDO5" }, - [RN5T618_LDORTC1] = { .name = "LDORTC1" }, - [RN5T618_LDORTC2] = { .name = "LDORTC2" }, -}; - -static int rn5t618_regulator_parse_dt(struct platform_device *pdev) -{ - struct device_node *np, *regulators; - int ret; - - np = of_node_get(pdev->dev.parent->of_node); - if (!np) - return 0; - - regulators = of_get_child_by_name(np, "regulators"); - if (!regulators) { - dev_err(&pdev->dev, "regulators node not found\n"); - return -EINVAL; - } - - ret = of_regulator_match(&pdev->dev, regulators, rn5t618_matches, - ARRAY_SIZE(rn5t618_matches)); - of_node_put(regulators); - if (ret < 0) { - dev_err(&pdev->dev, "error parsing regulator init data: %d\n", - ret); - } - - return 0; -} - static int rn5t618_regulator_probe(struct platform_device *pdev) { struct rn5t618 *rn5t618 = dev_get_drvdata(pdev->dev.parent); struct regulator_config config = { }; struct regulator_dev *rdev; - int ret, i; - - ret = rn5t618_regulator_parse_dt(pdev); - if (ret) - return ret; + int i; for (i = 0; i < RN5T618_REG_NUM; i++) { - config.dev = &pdev->dev; - config.init_data = rn5t618_matches[i].init_data; - config.of_node = rn5t618_matches[i].of_node; + config.dev = pdev->dev.parent; config.regmap = rn5t618->regmap; rdev = devm_regulator_register(&pdev->dev, diff --git a/drivers/regulator/rt5033-regulator.c b/drivers/regulator/rt5033-regulator.c new file mode 100644 index 00000000000..870cc49438d --- /dev/null +++ b/drivers/regulator/rt5033-regulator.c @@ -0,0 +1,123 @@ +/* + * Regulator driver for the Richtek RT5033 + * + * Copyright (C) 2014 Samsung Electronics, Co., Ltd. + * Author: Beomho Seo <beomho.seo@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published bythe Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/mfd/rt5033.h> +#include <linux/mfd/rt5033-private.h> +#include <linux/regulator/of_regulator.h> + +static struct regulator_ops rt5033_safe_ldo_ops = { + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .list_voltage = regulator_list_voltage_linear, +}; + +static struct regulator_ops rt5033_buck_ops = { + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, +}; + +static const struct regulator_desc rt5033_supported_regulators[] = { + [RT5033_BUCK] = { + .name = "BUCK", + .id = RT5033_BUCK, + .ops = &rt5033_buck_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .n_voltages = RT5033_REGULATOR_BUCK_VOLTAGE_STEP_NUM, + .min_uV = RT5033_REGULATOR_BUCK_VOLTAGE_MIN, + .uV_step = RT5033_REGULATOR_BUCK_VOLTAGE_STEP, + .enable_reg = RT5033_REG_CTRL, + .enable_mask = RT5033_CTRL_EN_BUCK_MASK, + .vsel_reg = RT5033_REG_BUCK_CTRL, + .vsel_mask = RT5033_BUCK_CTRL_MASK, + }, + [RT5033_LDO] = { + .name = "LDO", + .id = RT5033_LDO, + .ops = &rt5033_buck_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .n_voltages = RT5033_REGULATOR_LDO_VOLTAGE_STEP_NUM, + .min_uV = RT5033_REGULATOR_LDO_VOLTAGE_MIN, + .uV_step = RT5033_REGULATOR_LDO_VOLTAGE_STEP, + .enable_reg = RT5033_REG_CTRL, + .enable_mask = RT5033_CTRL_EN_LDO_MASK, + .vsel_reg = RT5033_REG_LDO_CTRL, + .vsel_mask = RT5033_LDO_CTRL_MASK, + }, + [RT5033_SAFE_LDO] = { + .name = "SAFE_LDO", + .id = RT5033_SAFE_LDO, + .ops = &rt5033_safe_ldo_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .n_voltages = 1, + .min_uV = RT5033_REGULATOR_SAFE_LDO_VOLTAGE, + .enable_reg = RT5033_REG_CTRL, + .enable_mask = RT5033_CTRL_EN_SAFE_LDO_MASK, + }, +}; + +static int rt5033_regulator_probe(struct platform_device *pdev) +{ + struct rt5033_dev *rt5033 = dev_get_drvdata(pdev->dev.parent); + int ret, i; + struct regulator_config config = {}; + + config.dev = &pdev->dev; + config.driver_data = rt5033; + + for (i = 0; i < ARRAY_SIZE(rt5033_supported_regulators); i++) { + struct regulator_dev *regulator; + + config.regmap = rt5033->regmap; + + regulator = devm_regulator_register(&pdev->dev, + &rt5033_supported_regulators[i], &config); + if (IS_ERR(regulator)) { + ret = PTR_ERR(regulator); + dev_err(&pdev->dev, + "Regulator init failed %d: with error: %d\n", + i, ret); + return ret; + } + } + + return 0; +} + +static const struct platform_device_id rt5033_regulator_id[] = { + { "rt5033-regulator", }, + { } +}; +MODULE_DEVICE_TABLE(platform, rt5033_regulator_id); + +static struct platform_driver rt5033_regulator_driver = { + .driver = { + .name = "rt5033-regulator", + }, + .probe = rt5033_regulator_probe, + .id_table = rt5033_regulator_id, +}; +module_platform_driver(rt5033_regulator_driver); + +MODULE_DESCRIPTION("Richtek RT5033 Regulator driver"); +MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/regulator/s2mpa01.c b/drivers/regulator/s2mpa01.c index 7633b9bfbe6..5db4e12a7e0 100644 --- a/drivers/regulator/s2mpa01.c +++ b/drivers/regulator/s2mpa01.c @@ -298,7 +298,7 @@ static struct regulator_ops s2mpa01_buck_ops = { .enable_mask = S2MPA01_ENABLE_MASK \ } -static struct regulator_desc regulators[] = { +static const struct regulator_desc regulators[] = { regulator_desc_ldo(1, STEP_25_MV), regulator_desc_ldo(2, STEP_50_MV), regulator_desc_ldo(3, STEP_50_MV), diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c index b4ae022091e..2fa99a85853 100644 --- a/drivers/regulator/s2mps11.c +++ b/drivers/regulator/s2mps11.c @@ -845,7 +845,7 @@ static int s2mps11_pmic_probe(struct platform_device *pdev) return -EINVAL; }; - s2mps11->ext_control_gpio = devm_kzalloc(&pdev->dev, + s2mps11->ext_control_gpio = devm_kmalloc(&pdev->dev, sizeof(*s2mps11->ext_control_gpio) * s2mps11->rdev_num, GFP_KERNEL); if (!s2mps11->ext_control_gpio) |