summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/networking/xfrm_sync.txt166
-rw-r--r--drivers/net/irda/irda-usb.c6
-rw-r--r--drivers/net/irda/smsc-ircc2.c316
-rw-r--r--include/net/arp.h2
-rw-r--r--include/net/xfrm.h8
-rw-r--r--net/atm/clip.c460
-rw-r--r--net/ipv4/arp.c4
-rw-r--r--net/ipv4/devinet.c1
-rw-r--r--net/ipv4/fib_frontend.c1
-rw-r--r--net/ipv4/inet_hashtables.c4
-rw-r--r--net/ipv4/ip_output.c2
-rw-r--r--net/ipv4/tcp_input.c1
-rw-r--r--net/ipv4/tcp_ipv4.c1
-rw-r--r--net/ipv4/tcp_output.c3
-rw-r--r--net/xfrm/xfrm_state.c25
15 files changed, 682 insertions, 318 deletions
diff --git a/Documentation/networking/xfrm_sync.txt b/Documentation/networking/xfrm_sync.txt
new file mode 100644
index 00000000000..8be626f7c0b
--- /dev/null
+++ b/Documentation/networking/xfrm_sync.txt
@@ -0,0 +1,166 @@
+
+The sync patches work is based on initial patches from
+Krisztian <hidden@balabit.hu> and others and additional patches
+from Jamal <hadi@cyberus.ca>.
+
+The end goal for syncing is to be able to insert attributes + generate
+events so that the an SA can be safely moved from one machine to another
+for HA purposes.
+The idea is to synchronize the SA so that the takeover machine can do
+the processing of the SA as accurate as possible if it has access to it.
+
+We already have the ability to generate SA add/del/upd events.
+These patches add ability to sync and have accurate lifetime byte (to
+ensure proper decay of SAs) and replay counters to avoid replay attacks
+with as minimal loss at failover time.
+This way a backup stays as closely uptodate as an active member.
+
+Because the above items change for every packet the SA receives,
+it is possible for a lot of the events to be generated.
+For this reason, we also add a nagle-like algorithm to restrict
+the events. i.e we are going to set thresholds to say "let me
+know if the replay sequence threshold is reached or 10 secs have passed"
+These thresholds are set system-wide via sysctls or can be updated
+per SA.
+
+The identified items that need to be synchronized are:
+- the lifetime byte counter
+note that: lifetime time limit is not important if you assume the failover
+machine is known ahead of time since the decay of the time countdown
+is not driven by packet arrival.
+- the replay sequence for both inbound and outbound
+
+1) Message Structure
+----------------------
+
+nlmsghdr:aevent_id:optional-TLVs.
+
+The netlink message types are:
+
+XFRM_MSG_NEWAE and XFRM_MSG_GETAE.
+
+A XFRM_MSG_GETAE does not have TLVs.
+A XFRM_MSG_NEWAE will have at least two TLVs (as is
+discussed further below).
+
+aevent_id structure looks like:
+
+ struct xfrm_aevent_id {
+ struct xfrm_usersa_id sa_id;
+ __u32 flags;
+ };
+
+xfrm_usersa_id in this message layout identifies the SA.
+
+flags are used to indicate different things. The possible
+flags are:
+ XFRM_AE_RTHR=1, /* replay threshold*/
+ XFRM_AE_RVAL=2, /* replay value */
+ XFRM_AE_LVAL=4, /* lifetime value */
+ XFRM_AE_ETHR=8, /* expiry timer threshold */
+ XFRM_AE_CR=16, /* Event cause is replay update */
+ XFRM_AE_CE=32, /* Event cause is timer expiry */
+ XFRM_AE_CU=64, /* Event cause is policy update */
+
+How these flags are used is dependent on the direction of the
+message (kernel<->user) as well the cause (config, query or event).
+This is described below in the different messages.
+
+The pid will be set appropriately in netlink to recognize direction
+(0 to the kernel and pid = processid that created the event
+when going from kernel to user space)
+
+A program needs to subscribe to multicast group XFRMNLGRP_AEVENTS
+to get notified of these events.
+
+2) TLVS reflect the different parameters:
+-----------------------------------------
+
+a) byte value (XFRMA_LTIME_VAL)
+This TLV carries the running/current counter for byte lifetime since
+last event.
+
+b)replay value (XFRMA_REPLAY_VAL)
+This TLV carries the running/current counter for replay sequence since
+last event.
+
+c)replay threshold (XFRMA_REPLAY_THRESH)
+This TLV carries the threshold being used by the kernel to trigger events
+when the replay sequence is exceeded.
+
+d) expiry timer (XFRMA_ETIMER_THRESH)
+This is a timer value in milliseconds which is used as the nagle
+value to rate limit the events.
+
+3) Default configurations for the parameters:
+----------------------------------------------
+
+By default these events should be turned off unless there is
+at least one listener registered to listen to the multicast
+group XFRMNLGRP_AEVENTS.
+
+Programs installing SAs will need to specify the two thresholds, however,
+in order to not change existing applications such as racoon
+we also provide default threshold values for these different parameters
+in case they are not specified.
+
+the two sysctls/proc entries are:
+a) /proc/sys/net/core/sysctl_xfrm_aevent_etime
+used to provide default values for the XFRMA_ETIMER_THRESH in incremental
+units of time of 100ms. The default is 10 (1 second)
+
+b) /proc/sys/net/core/sysctl_xfrm_aevent_rseqth
+used to provide default values for XFRMA_REPLAY_THRESH parameter
+in incremental packet count. The default is two packets.
+
+4) Message types
+----------------
+
+a) XFRM_MSG_GETAE issued by user-->kernel.
+XFRM_MSG_GETAE does not carry any TLVs.
+The response is a XFRM_MSG_NEWAE which is formatted based on what
+XFRM_MSG_GETAE queried for.
+The response will always have XFRMA_LTIME_VAL and XFRMA_REPLAY_VAL TLVs.
+*if XFRM_AE_RTHR flag is set, then XFRMA_REPLAY_THRESH is also retrieved
+*if XFRM_AE_ETHR flag is set, then XFRMA_ETIMER_THRESH is also retrieved
+
+b) XFRM_MSG_NEWAE is issued by either user space to configure
+or kernel to announce events or respond to a XFRM_MSG_GETAE.
+
+i) user --> kernel to configure a specific SA.
+any of the values or threshold parameters can be updated by passing the
+appropriate TLV.
+A response is issued back to the sender in user space to indicate success
+or failure.
+In the case of success, additionally an event with
+XFRM_MSG_NEWAE is also issued to any listeners as described in iii).
+
+ii) kernel->user direction as a response to XFRM_MSG_GETAE
+The response will always have XFRMA_LTIME_VAL and XFRMA_REPLAY_VAL TLVs.
+The threshold TLVs will be included if explicitly requested in
+the XFRM_MSG_GETAE message.
+
+iii) kernel->user to report as event if someone sets any values or
+thresholds for an SA using XFRM_MSG_NEWAE (as described in #i above).
+In such a case XFRM_AE_CU flag is set to inform the user that
+the change happened as a result of an update.
+The message will always have XFRMA_LTIME_VAL and XFRMA_REPLAY_VAL TLVs.
+
+iv) kernel->user to report event when replay threshold or a timeout
+is exceeded.
+In such a case either XFRM_AE_CR (replay exceeded) or XFRM_AE_CE (timeout
+happened) is set to inform the user what happened.
+Note the two flags are mutually exclusive.
+The message will always have XFRMA_LTIME_VAL and XFRMA_REPLAY_VAL TLVs.
+
+Exceptions to threshold settings
+--------------------------------
+
+If you have an SA that is getting hit by traffic in bursts such that
+there is a period where the timer threshold expires with no packets
+seen, then an odd behavior is seen as follows:
+The first packet arrival after a timer expiry will trigger a timeout
+aevent; i.e we dont wait for a timeout period or a packet threshold
+to be reached. This is done for simplicity and efficiency reasons.
+
+-JHS
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index 606243d1179..96bdb73c228 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -1815,14 +1815,14 @@ static int irda_usb_probe(struct usb_interface *intf,
self->needspatch = (ret < 0);
if (ret < 0) {
printk("patch_device failed\n");
- goto err_out_4;
+ goto err_out_5;
}
/* replace IrDA class descriptor with what patched device is now reporting */
irda_desc = irda_usb_find_class_desc (self->usbintf);
if (irda_desc == NULL) {
ret = -ENODEV;
- goto err_out_4;
+ goto err_out_5;
}
if (self->irda_desc)
kfree (self->irda_desc);
@@ -1832,6 +1832,8 @@ static int irda_usb_probe(struct usb_interface *intf,
return 0;
+err_out_5:
+ unregister_netdev(self->netdev);
err_out_4:
kfree(self->speed_buff);
err_out_3:
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index bbcfc8ec35a..58f76cefbc8 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -225,6 +225,8 @@ static int __init smsc_superio_lpc(unsigned short cfg_base);
#ifdef CONFIG_PCI
static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuration *conf);
static int __init preconfigure_through_82801(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf);
+static void __init preconfigure_ali_port(struct pci_dev *dev,
+ unsigned short port);
static int __init preconfigure_through_ali(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf);
static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
unsigned short ircc_fir,
@@ -2327,9 +2329,14 @@ static int __init smsc_superio_lpc(unsigned short cfg_base)
* pre-configuration not properly done by the BIOS (especially laptops)
* This code is based in part on smcinit.c, tosh1800-smcinit.c
* and tosh2450-smcinit.c. The table lists the device entries
- * for ISA bridges with an LPC (Local Peripheral Configurator)
- * that are in turn used to configure the SMSC device with default
- * SIR and FIR I/O ports, DMA and IRQ.
+ * for ISA bridges with an LPC (Low Pin Count) controller which
+ * handles the communication with the SMSC device. After the LPC
+ * controller is initialized through PCI, the SMSC device is initialized
+ * through a dedicated port in the ISA port-mapped I/O area, this latter
+ * area is used to configure the SMSC device with default
+ * SIR and FIR I/O ports, DMA and IRQ. Different vendors have
+ * used different sets of parameters and different control port
+ * addresses making a subsystem device table necessary.
*/
#ifdef CONFIG_PCI
#define PCIID_VENDOR_INTEL 0x8086
@@ -2340,9 +2347,10 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __dev
.device = 0x24cc,
.subvendor = 0x103c,
.subdevice = 0x088c,
- .sir_io = 0x02f8, /* Quite certain these are the same for nc8000 as for nc6000 */
+ /* Quite certain these are the same for nc8000 as for nc6000 */
+ .sir_io = 0x02f8,
.fir_io = 0x0130,
- .fir_irq = 0x09,
+ .fir_irq = 0x05,
.fir_dma = 0x03,
.cfg_base = 0x004e,
.preconfigure = preconfigure_through_82801,
@@ -2355,60 +2363,79 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __dev
.subdevice = 0x0890,
.sir_io = 0x02f8,
.fir_io = 0x0130,
- .fir_irq = 0x09,
+ .fir_irq = 0x05,
.fir_dma = 0x03,
.cfg_base = 0x004e,
.preconfigure = preconfigure_through_82801,
.name = "HP nc6000",
},
{
- .vendor = PCIID_VENDOR_INTEL, /* Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge */
+ /* Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge */
+ .vendor = PCIID_VENDOR_INTEL,
.device = 0x24c0,
.subvendor = 0x1179,
- .subdevice = 0xffff, /* 0xffff is "any", Not sure, 0x0001 or 0x0002 */
+ .subdevice = 0xffff, /* 0xffff is "any" */
.sir_io = 0x03f8,
.fir_io = 0x0130,
.fir_irq = 0x07,
.fir_dma = 0x01,
.cfg_base = 0x002e,
.preconfigure = preconfigure_through_82801,
- .name = "Toshiba Satellite 2450",
+ .name = "Toshiba laptop with Intel 82801DB/DBL LPC bridge",
},
{
.vendor = PCIID_VENDOR_INTEL, /* Intel 82801CAM ISA bridge */
- .device = 0x248c, /* Some use 24cc? */
+ .device = 0x248c,
.subvendor = 0x1179,
- .subdevice = 0xffff, /* 0xffff is "any", Not sure, 0x0001 or 0x0002 */
+ .subdevice = 0xffff, /* 0xffff is "any" */
.sir_io = 0x03f8,
.fir_io = 0x0130,
.fir_irq = 0x03,
.fir_dma = 0x03,
.cfg_base = 0x002e,
.preconfigure = preconfigure_through_82801,
- .name = "Toshiba Satellite 5100/5200, Tecra 9100",
+ .name = "Toshiba laptop with Intel 82801CAM ISA bridge",
},
{
- .vendor = PCIID_VENDOR_ALI, /* ALi M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] */
+ /* 82801DBM (ICH4-M) LPC Interface Bridge */
+ .vendor = PCIID_VENDOR_INTEL,
+ .device = 0x24cc,
+ .subvendor = 0x1179,
+ .subdevice = 0xffff, /* 0xffff is "any" */
+ .sir_io = 0x03f8,
+ .fir_io = 0x0130,
+ .fir_irq = 0x03,
+ .fir_dma = 0x03,
+ .cfg_base = 0x002e,
+ .preconfigure = preconfigure_through_82801,
+ .name = "Toshiba laptop with Intel 8281DBM LPC bridge",
+ },
+ {
+ /* ALi M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] */
+ .vendor = PCIID_VENDOR_ALI,
.device = 0x1533,
.subvendor = 0x1179,
- .subdevice = 0xffff, /* 0xffff is "any", Not sure, 0x0001 or 0x0002 */
+ .subdevice = 0xffff, /* 0xffff is "any" */
.sir_io = 0x02e8,
.fir_io = 0x02f8,
.fir_irq = 0x07,
.fir_dma = 0x03,
.cfg_base = 0x002e,
.preconfigure = preconfigure_through_ali,
- .name = "Toshiba Satellite 1800",
+ .name = "Toshiba laptop with ALi ISA bridge",
},
{ } // Terminator
};
/*
- * This sets up the basic SMSC parameters (FIR port, SIR port, FIR DMA, FIR IRQ)
+ * This sets up the basic SMSC parameters
+ * (FIR port, SIR port, FIR DMA, FIR IRQ)
* through the chip configuration port.
*/
-static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuration *conf)
+static int __init preconfigure_smsc_chip(struct
+ smsc_ircc_subsystem_configuration
+ *conf)
{
unsigned short iobase = conf->cfg_base;
unsigned char tmpbyte;
@@ -2416,7 +2443,9 @@ static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuratio
outb(LPC47N227_CFGACCESSKEY, iobase); // enter configuration state
outb(SMSCSIOFLAT_DEVICEID_REG, iobase); // set for device ID
tmpbyte = inb(iobase +1); // Read device ID
- IRDA_DEBUG(0, "Detected Chip id: 0x%02x, setting up registers...\n",tmpbyte);
+ IRDA_DEBUG(0,
+ "Detected Chip id: 0x%02x, setting up registers...\n",
+ tmpbyte);
/* Disable UART1 and set up SIR I/O port */
outb(0x24, iobase); // select CR24 - UART1 base addr
@@ -2426,6 +2455,7 @@ static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuratio
tmpbyte = inb(iobase + 1);
if (tmpbyte != (conf->sir_io >> 2) ) {
IRDA_WARNING("ERROR: could not configure SIR ioport.\n");
+ IRDA_WARNING("Try to supply ircc_cfg argument.\n");
return -ENXIO;
}
@@ -2461,7 +2491,8 @@ static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuratio
outb(SMSCSIOFLAT_UARTMODE0C_REG, iobase); // CR0C - UART mode
tmpbyte = inb(iobase + 1);
- tmpbyte &= ~SMSCSIOFLAT_UART2MODE_MASK | SMSCSIOFLAT_UART2MODE_VAL_IRDA;
+ tmpbyte &= ~SMSCSIOFLAT_UART2MODE_MASK |
+ SMSCSIOFLAT_UART2MODE_VAL_IRDA;
outb(tmpbyte, iobase + 1); // enable IrDA (HPSIR) mode, high speed
outb(LPC47N227_APMBOOTDRIVE_REG, iobase); // CR07 - Auto Pwr Mgt/boot drive sel
@@ -2486,53 +2517,226 @@ static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuratio
return 0;
}
-/* 82801CAM registers */
+/* 82801CAM generic registers */
#define VID 0x00
#define DID 0x02
-#define PIRQA_ROUT 0x60
+#define PIRQ_A_D_ROUT 0x60
+#define SIRQ_CNTL 0x64
+#define PIRQ_E_H_ROUT 0x68
#define PCI_DMA_C 0x90
+/* LPC-specific registers */
#define COM_DEC 0xe0
+#define GEN1_DEC 0xe4
#define LPC_EN 0xe6
#define GEN2_DEC 0xec
/*
- * Sets up the I/O range using the 82801CAM ISA bridge, 82801DBM LPC bridge or
- * Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge. They all work the same way!
+ * Sets up the I/O range using the 82801CAM ISA bridge, 82801DBM LPC bridge
+ * or Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge.
+ * They all work the same way!
*/
static int __init preconfigure_through_82801(struct pci_dev *dev,
- struct smsc_ircc_subsystem_configuration *conf)
+ struct
+ smsc_ircc_subsystem_configuration
+ *conf)
{
unsigned short tmpword;
- int ret;
+ unsigned char tmpbyte;
- IRDA_MESSAGE("Setting up the SMSC device via the 82801 controller.\n");
- pci_write_config_byte(dev, COM_DEC, 0x10);
+ IRDA_MESSAGE("Setting up Intel 82801 controller and SMSC device\n");
+ /*
+ * Select the range for the COMA COM port (SIR)
+ * Register COM_DEC:
+ * Bit 7: reserved
+ * Bit 6-4, COMB decode range
+ * Bit 3: reserved
+ * Bit 2-0, COMA decode range
+ *
+ * Decode ranges:
+ * 000 = 0x3f8-0x3ff (COM1)
+ * 001 = 0x2f8-0x2ff (COM2)
+ * 010 = 0x220-0x227
+ * 011 = 0x228-0x22f
+ * 100 = 0x238-0x23f
+ * 101 = 0x2e8-0x2ef (COM4)
+ * 110 = 0x338-0x33f
+ * 111 = 0x3e8-0x3ef (COM3)
+ */
+ pci_read_config_byte(dev, COM_DEC, &tmpbyte);
+ tmpbyte &= 0xf8; /* mask COMA bits */
+ switch(conf->sir_io) {
+ case 0x3f8:
+ tmpbyte |= 0x00;
+ break;
+ case 0x2f8:
+ tmpbyte |= 0x01;
+ break;
+ case 0x220:
+ tmpbyte |= 0x02;
+ break;
+ case 0x228:
+ tmpbyte |= 0x03;
+ break;
+ case 0x238:
+ tmpbyte |= 0x04;
+ break;
+ case 0x2e8:
+ tmpbyte |= 0x05;
+ break;
+ case 0x338:
+ tmpbyte |= 0x06;
+ break;
+ case 0x3e8:
+ tmpbyte |= 0x07;
+ break;
+ default:
+ tmpbyte |= 0x01; /* COM2 default */
+ }
+ IRDA_DEBUG(1, "COM_DEC (write): 0x%02x\n", tmpbyte);
+ pci_write_config_byte(dev, COM_DEC, tmpbyte);
- /* Enable LPC */
- pci_read_config_word(dev, LPC_EN, &tmpword); /* LPC_EN register */
- tmpword &= 0xfffd; /* mask bit 1 */
- tmpword |= 0x0001; /* set bit 0 : COMA addr range enable */
+ /* Enable Low Pin Count interface */
+ pci_read_config_word(dev, LPC_EN, &tmpword);
+ /* These seem to be set up at all times,
+ * just make sure it is properly set.
+ */
+ switch(conf->cfg_base) {
+ case 0x04e:
+ tmpword |= 0x2000;
+ break;
+ case 0x02e:
+ tmpword |= 0x1000;
+ break;
+ case 0x062:
+ tmpword |= 0x0800;
+ break;
+ case 0x060:
+ tmpword |= 0x0400;
+ break;
+ default:
+ IRDA_WARNING("Uncommon I/O base address: 0x%04x\n",
+ conf->cfg_base);
+ break;
+ }
+ tmpword &= 0xfffd; /* disable LPC COMB */
+ tmpword |= 0x0001; /* set bit 0 : enable LPC COMA addr range (GEN2) */
+ IRDA_DEBUG(1, "LPC_EN (write): 0x%04x\n", tmpword);
pci_write_config_word(dev, LPC_EN, tmpword);
- /* Setup DMA */
- pci_write_config_word(dev, PCI_DMA_C, 0xc0c0); /* LPC I/F DMA on, channel 3 -- rtm (?? PCI DMA ?) */
- pci_write_config_word(dev, GEN2_DEC, 0x131); /* LPC I/F 2nd decode range */
+ /*
+ * Configure LPC DMA channel
+ * PCI_DMA_C bits:
+ * Bit 15-14: DMA channel 7 select
+ * Bit 13-12: DMA channel 6 select
+ * Bit 11-10: DMA channel 5 select
+ * Bit 9-8: Reserved
+ * Bit 7-6: DMA channel 3 select
+ * Bit 5-4: DMA channel 2 select
+ * Bit 3-2: DMA channel 1 select
+ * Bit 1-0: DMA channel 0 select
+ * 00 = Reserved value
+ * 01 = PC/PCI DMA
+ * 10 = Reserved value
+ * 11 = LPC I/F DMA
+ */
+ pci_read_config_word(dev, PCI_DMA_C, &tmpword);
+ switch(conf->fir_dma) {
+ case 0x07:
+ tmpword |= 0xc000;
+ break;
+ case 0x06:
+ tmpword |= 0x3000;
+ break;
+ case 0x05:
+ tmpword |= 0x0c00;
+ break;
+ case 0x03:
+ tmpword |= 0x00c0;
+ break;
+ case 0x02:
+ tmpword |= 0x0030;
+ break;
+ case 0x01:
+ tmpword |= 0x000c;
+ break;
+ case 0x00:
+ tmpword |= 0x0003;
+ break;
+ default:
+ break; /* do not change settings */
+ }
+ IRDA_DEBUG(1, "PCI_DMA_C (write): 0x%04x\n", tmpword);
+ pci_write_config_word(dev, PCI_DMA_C, tmpword);
+
+ /*
+ * GEN2_DEC bits:
+ * Bit 15-4: Generic I/O range
+ * Bit 3-1: reserved (read as 0)
+ * Bit 0: enable GEN2 range on LPC I/F
+ */
+ tmpword = conf->fir_io & 0xfff8;
+ tmpword |= 0x0001;
+ IRDA_DEBUG(1, "GEN2_DEC (write): 0x%04x\n", tmpword);
+ pci_write_config_word(dev, GEN2_DEC, tmpword);
/* Pre-configure chip */
- ret = preconfigure_smsc_chip(conf);
+ return preconfigure_smsc_chip(conf);
+}
- /* Disable LPC */
- pci_read_config_word(dev, LPC_EN, &tmpword); /* LPC_EN register */
- tmpword &= 0xfffc; /* mask bit 1 and bit 0, COMA addr range disable */
- pci_write_config_word(dev, LPC_EN, tmpword);
- return ret;
+/*
+ * Pre-configure a certain port on the ALi 1533 bridge.
+ * This is based on reverse-engineering since ALi does not
+ * provide any data sheet for the 1533 chip.
+ */
+static void __init preconfigure_ali_port(struct pci_dev *dev,
+ unsigned short port)
+{
+ unsigned char reg;
+ /* These bits obviously control the different ports */
+ unsigned char mask;
+ unsigned char tmpbyte;
+
+ switch(port) {
+ case 0x0130:
+ case 0x0178:
+ reg = 0xb0;
+ mask = 0x80;
+ break;
+ case 0x03f8:
+ reg = 0xb4;
+ mask = 0x80;
+ break;
+ case 0x02f8:
+ reg = 0xb4;
+ mask = 0x30;
+ break;
+ case 0x02e8:
+ reg = 0xb4;
+ mask = 0x08;
+ break;
+ default:
+ IRDA_ERROR("Failed to configure unsupported port on ALi 1533 bridge: 0x%04x\n", port);
+ return;
+ }
+
+ pci_read_config_byte(dev, reg, &tmpbyte);
+ /* Turn on the right bits */
+ tmpbyte |= mask;
+ pci_write_config_byte(dev, reg, tmpbyte);
+ IRDA_MESSAGE("Activated ALi 1533 ISA bridge port 0x%04x.\n", port);
+ return;
}
static int __init preconfigure_through_ali(struct pci_dev *dev,
- struct smsc_ircc_subsystem_configuration *conf)
+ struct
+ smsc_ircc_subsystem_configuration
+ *conf)
{
- /* TODO: put in ALi 1533 configuration here. */
- IRDA_MESSAGE("SORRY: %s has an unsupported bridge controller (ALi): not pre-configured.\n", conf->name);
- return -ENODEV;
+ /* Configure the two ports on the ALi 1533 */
+ preconfigure_ali_port(dev, conf->sir_io);
+ preconfigure_ali_port(dev, conf->fir_io);
+
+ /* Pre-configure chip */
+ return preconfigure_smsc_chip(conf);
}
static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
@@ -2552,9 +2756,10 @@ static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
struct smsc_ircc_subsystem_configuration *conf;
/*
- * Cache the subsystem vendor/device: some manufacturers fail to set
- * this for all components, so we save it in case there is just
- * 0x0000 0x0000 on the device we want to check.
+ * Cache the subsystem vendor/device:
+ * some manufacturers fail to set this for all components,
+ * so we save it in case there is just 0x0000 0x0000 on the
+ * device we want to check.
*/
if (dev->subsystem_vendor != 0x0000U) {
ss_vendor = dev->subsystem_vendor;
@@ -2564,13 +2769,20 @@ static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
for( ; conf->subvendor; conf++) {
if(conf->vendor == dev->vendor &&
conf->device == dev->device &&
- conf->subvendor == ss_vendor && /* Sometimes these are cached values */
- (conf->subdevice == ss_device || conf->subdevice == 0xffff)) {
- struct smsc_ircc_subsystem_configuration tmpconf;
+ conf->subvendor == ss_vendor &&
+ /* Sometimes these are cached values */
+ (conf->subdevice == ss_device ||
+ conf->subdevice == 0xffff)) {
+ struct smsc_ircc_subsystem_configuration
+ tmpconf;
- memcpy(&tmpconf, conf, sizeof(struct smsc_ircc_subsystem_configuration));
+ memcpy(&tmpconf, conf,
+ sizeof(struct smsc_ircc_subsystem_configuration));
- /* Override the default values with anything passed in as parameter */
+ /*
+ * Override the default values with anything
+ * passed in as parameter
+ */
if (ircc_cfg != 0)
tmpconf.cfg_base = ircc_cfg;
if (ircc_fir != 0)
diff --git a/include/net/arp.h b/include/net/arp.h
index a13e30c35f4..643bded9f55 100644
--- a/include/net/arp.h
+++ b/include/net/arp.h
@@ -10,8 +10,6 @@
extern struct neigh_table arp_tbl;
extern void arp_init(void);
-extern int arp_rcv(struct sk_buff *skb, struct net_device *dev,
- struct packet_type *pt, struct net_device *orig_dev);
extern int arp_find(unsigned char *haddr, struct sk_buff *skb);
extern int arp_ioctl(unsigned int cmd, void __user *arg);
extern void arp_send(int type, int ptype, u32 dest_ip,
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index 0d5529c382e..afa508d92c9 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -143,6 +143,11 @@ struct xfrm_state
/* Replay detection state at the time we sent the last notification */
struct xfrm_replay_state preplay;
+ /* internal flag that only holds state for delayed aevent at the
+ * moment
+ */
+ u32 xflags;
+
/* Replay detection notification settings */
u32 replay_maxage;
u32 replay_maxdiff;
@@ -168,6 +173,9 @@ struct xfrm_state
void *data;
};
+/* xflags - make enum if more show up */
+#define XFRM_TIME_DEFER 1
+
enum {
XFRM_STATE_VOID,
XFRM_STATE_ACQ,
diff --git a/net/atm/clip.c b/net/atm/clip.c
index 3ab4e7947ba..1a786bfaa41 100644
--- a/net/atm/clip.c
+++ b/net/atm/clip.c
@@ -2,7 +2,6 @@
/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
-
#include <linux/config.h>
#include <linux/string.h>
#include <linux/errno.h>
@@ -54,24 +53,24 @@ static struct net_device *clip_devs;
static struct atm_vcc *atmarpd;
static struct neigh_table clip_tbl;
static struct timer_list idle_timer;
-static int start_timer = 1;
-
-static int to_atmarpd(enum atmarp_ctrl_type type,int itf,unsigned long ip)
+static int to_atmarpd(enum atmarp_ctrl_type type, int itf, unsigned long ip)
{
struct sock *sk;
struct atmarp_ctrl *ctrl;
struct sk_buff *skb;
- DPRINTK("to_atmarpd(%d)\n",type);
- if (!atmarpd) return -EUNATCH;
+ DPRINTK("to_atmarpd(%d)\n", type);
+ if (!atmarpd)
+ return -EUNATCH;
skb = alloc_skb(sizeof(struct atmarp_ctrl),GFP_ATOMIC);
- if (!skb) return -ENOMEM;
+ if (!skb)
+ return -ENOMEM;
ctrl = (struct atmarp_ctrl *) skb_put(skb,sizeof(struct atmarp_ctrl));
ctrl->type = type;
ctrl->itf_num = itf;
ctrl->ip = ip;
- atm_force_charge(atmarpd,skb->truesize);
+ atm_force_charge(atmarpd, skb->truesize);
sk = sk_atm(atmarpd);
skb_queue_tail(&sk->sk_receive_queue, skb);
@@ -79,26 +78,24 @@ static int to_atmarpd(enum atmarp_ctrl_type type,int itf,unsigned long ip)
return 0;
}
-
-static void link_vcc(struct clip_vcc *clip_vcc,struct atmarp_entry *entry)
+static void link_vcc(struct clip_vcc *clip_vcc, struct atmarp_entry *entry)
{
- DPRINTK("link_vcc %p to entry %p (neigh %p)\n",clip_vcc,entry,
- entry->neigh);
+ DPRINTK("link_vcc %p to entry %p (neigh %p)\n", clip_vcc, entry,
+ entry->neigh);
clip_vcc->entry = entry;
- clip_vcc->xoff = 0; /* @@@ may overrun buffer by one packet */
+ clip_vcc->xoff = 0; /* @@@ may overrun buffer by one packet */
clip_vcc->next = entry->vccs;
entry->vccs = clip_vcc;
entry->neigh->used = jiffies;
}
-
static void unlink_clip_vcc(struct clip_vcc *clip_vcc)
{
struct atmarp_entry *entry = clip_vcc->entry;
struct clip_vcc **walk;
if (!entry) {
- printk(KERN_CRIT "!clip_vcc->entry (clip_vcc %p)\n",clip_vcc);
+ printk(KERN_CRIT "!clip_vcc->entry (clip_vcc %p)\n", clip_vcc);
return;
}
spin_lock_bh(&entry->neigh->dev->xmit_lock); /* block clip_start_xmit() */
@@ -107,24 +104,24 @@ static void unlink_clip_vcc(struct clip_vcc *clip_vcc)
if (*walk == clip_vcc) {
int error;
- *walk = clip_vcc->next; /* atomic */
+ *walk = clip_vcc->next; /* atomic */
clip_vcc->entry = NULL;
if (clip_vcc->xoff)
netif_wake_queue(entry->neigh->dev);
if (entry->vccs)
goto out;
- entry->expires = jiffies-1;
- /* force resolution or expiration */
+ entry->expires = jiffies - 1;
+ /* force resolution or expiration */
error = neigh_update(entry->neigh, NULL, NUD_NONE,
NEIGH_UPDATE_F_ADMIN);
if (error)
printk(KERN_CRIT "unlink_clip_vcc: "
- "neigh_update failed with %d\n",error);
+ "neigh_update failed with %d\n", error);
goto out;
}
printk(KERN_CRIT "ATMARP: unlink_clip_vcc failed (entry %p, vcc "
- "0x%p)\n",entry,clip_vcc);
-out:
+ "0x%p)\n", entry, clip_vcc);
+ out:
spin_unlock_bh(&entry->neigh->dev->xmit_lock);
}
@@ -153,13 +150,13 @@ static int neigh_check_cb(struct neighbour *n)
DPRINTK("destruction postponed with ref %d\n",
atomic_read(&n->refcnt));
- while ((skb = skb_dequeue(&n->arp_queue)) != NULL)
+ while ((skb = skb_dequeue(&n->arp_queue)) != NULL)
dev_kfree_skb(skb);
return 0;
}
- DPRINTK("expired neigh %p\n",n);
+ DPRINTK("expired neigh %p\n", n);
return 1;
}
@@ -167,7 +164,7 @@ static void idle_timer_check(unsigned long dummy)
{
write_lock(&clip_tbl.lock);
__neigh_for_each_release(&clip_tbl, neigh_check_cb);
- mod_timer(&idle_timer, jiffies+CLIP_CHECK_INTERVAL*HZ);
+ mod_timer(&idle_timer, jiffies + CLIP_CHECK_INTERVAL * HZ);
write_unlock(&clip_tbl.lock);
}
@@ -177,13 +174,13 @@ static int clip_arp_rcv(struct sk_buff *skb)
DPRINTK("clip_arp_rcv\n");
vcc = ATM_SKB(skb)->vcc;
- if (!vcc || !atm_charge(vcc,skb->truesize)) {
+ if (!vcc || !atm_charge(vcc, skb->truesize)) {
dev_kfree_skb_any(skb);
return 0;
}
- DPRINTK("pushing to %p\n",vcc);
- DPRINTK("using %p\n",CLIP_VCC(vcc)->old_push);
- CLIP_VCC(vcc)->old_push(vcc,skb);
+ DPRINTK("pushing to %p\n", vcc);
+ DPRINTK("using %p\n", CLIP_VCC(vcc)->old_push);
+ CLIP_VCC(vcc)->old_push(vcc, skb);
return 0;
}
@@ -193,34 +190,38 @@ static const unsigned char llc_oui[] = {
0x03, /* Ctrl: Unnumbered Information Command PDU */
0x00, /* OUI: EtherType */
0x00,
- 0x00 };
+ 0x00
+};
-static void clip_push(struct atm_vcc *vcc,struct sk_buff *skb)
+static void clip_push(struct atm_vcc *vcc, struct sk_buff *skb)
{
struct clip_vcc *clip_vcc = CLIP_VCC(vcc);
DPRINTK("clip push\n");
if (!skb) {
- DPRINTK("removing VCC %p\n",clip_vcc);
- if (clip_vcc->entry) unlink_clip_vcc(clip_vcc);
- clip_vcc->old_push(vcc,NULL); /* pass on the bad news */
+ DPRINTK("removing VCC %p\n", clip_vcc);
+ if (clip_vcc->entry)
+ unlink_clip_vcc(clip_vcc);
+ clip_vcc->old_push(vcc, NULL); /* pass on the bad news */
kfree(clip_vcc);
return;
}
- atm_return(vcc,skb->truesize);
+ atm_return(vcc, skb->truesize);
skb->dev = clip_vcc->entry ? clip_vcc->entry->neigh->dev : clip_devs;
- /* clip_vcc->entry == NULL if we don't have an IP address yet */
+ /* clip_vcc->entry == NULL if we don't have an IP address yet */
if (!skb->dev) {
dev_kfree_skb_any(skb);
return;
}
ATM_SKB(skb)->vcc = vcc;
skb->mac.raw = skb->data;
- if (!clip_vcc->encap || skb->len < RFC1483LLC_LEN || memcmp(skb->data,
- llc_oui,sizeof(llc_oui))) skb->protocol = htons(ETH_P_IP);
+ if (!clip_vcc->encap
+ || skb->len < RFC1483LLC_LEN
+ || memcmp(skb->data, llc_oui, sizeof (llc_oui)))
+ skb->protocol = htons(ETH_P_IP);
else {
skb->protocol = ((u16 *) skb->data)[3];
- skb_pull(skb,RFC1483LLC_LEN);
+ skb_pull(skb, RFC1483LLC_LEN);
if (skb->protocol == htons(ETH_P_ARP)) {
PRIV(skb->dev)->stats.rx_packets++;
PRIV(skb->dev)->stats.rx_bytes += skb->len;
@@ -235,58 +236,54 @@ static void clip_push(struct atm_vcc *vcc,struct sk_buff *skb)
netif_rx(skb);
}
-
/*
* Note: these spinlocks _must_not_ block on non-SMP. The only goal is that
* clip_pop is atomic with respect to the critical section in clip_start_xmit.
*/
-
-static void clip_pop(struct atm_vcc *vcc,struct sk_buff *skb)
+static void clip_pop(struct atm_vcc *vcc, struct sk_buff *skb)
{
struct clip_vcc *clip_vcc = CLIP_VCC(vcc);
struct net_device *dev = skb->dev;
int old;
unsigned long flags;
- DPRINTK("clip_pop(vcc %p)\n",vcc);
- clip_vcc->old_pop(vcc,skb);
+ DPRINTK("clip_pop(vcc %p)\n", vcc);
+ clip_vcc->old_pop(vcc, skb);
/* skb->dev == NULL in outbound ARP packets */
- if (!dev) return;
- spin_lock_irqsave(&PRIV(dev)->xoff_lock,flags);
- if (atm_may_send(vcc,0)) {
- old = xchg(&clip_vcc->xoff,0);
- if (old) netif_wake_queue(dev);
+ if (!dev)
+ return;
+ spin_lock_irqsave(&PRIV(dev)->xoff_lock, flags);
+ if (atm_may_send(vcc, 0)) {
+ old = xchg(&clip_vcc->xoff, 0);
+ if (old)
+ netif_wake_queue(dev);
}
- spin_unlock_irqrestore(&PRIV(dev)->xoff_lock,flags);
+ spin_unlock_irqrestore(&PRIV(dev)->xoff_lock, flags);
}
-
static void clip_neigh_destroy(struct neighbour *neigh)
{
- DPRINTK("clip_neigh_destroy (neigh %p)\n",neigh);
+ DPRINTK("clip_neigh_destroy (neigh %p)\n", neigh);
if (NEIGH2ENTRY(neigh)->vccs)
printk(KERN_CRIT "clip_neigh_destroy: vccs != NULL !!!\n");
NEIGH2ENTRY(neigh)->vccs = (void *) 0xdeadbeef;
}
-
-static void clip_neigh_solicit(struct neighbour *neigh,struct sk_buff *skb)
+static void clip_neigh_solicit(struct neighbour *neigh, struct sk_buff *skb)
{
- DPRINTK("clip_neigh_solicit (neigh %p, skb %p)\n",neigh,skb);
- to_atmarpd(act_need,PRIV(neigh->dev)->number,NEIGH2ENTRY(neigh)->ip);
+ DPRINTK("clip_neigh_solicit (neigh %p, skb %p)\n", neigh, skb);
+ to_atmarpd(act_need, PRIV(neigh->dev)->number, NEIGH2ENTRY(neigh)->ip);
}
-
-static void clip_neigh_error(struct neighbour *neigh,struct sk_buff *skb)
+static void clip_neigh_error(struct neighbour *neigh, struct sk_buff *skb)
{
#ifndef CONFIG_ATM_CLIP_NO_ICMP
- icmp_send(skb,ICMP_DEST_UNREACH,ICMP_HOST_UNREACH,0);
+ icmp_send(skb, ICMP_DEST_UNREACH, ICMP_HOST_UNREACH, 0);
#endif
kfree_skb(skb);
}
-
static struct neigh_ops clip_neigh_ops = {
.family = AF_INET,
.solicit = clip_neigh_solicit,
@@ -297,7 +294,6 @@ static struct neigh_ops clip_neigh_ops = {
.queue_xmit = dev_queue_xmit,
};
-
static int clip_constructor(struct neighbour *neigh)
{
struct atmarp_entry *entry = NEIGH2ENTRY(neigh);
@@ -305,9 +301,10 @@ static int clip_constructor(struct neighbour *neigh)
struct in_device *in_dev;
struct neigh_parms *parms;
- DPRINTK("clip_constructor (neigh %p, entry %p)\n",neigh,entry);
+ DPRINTK("clip_constructor (neigh %p, entry %p)\n", neigh, entry);
neigh->type = inet_addr_type(entry->ip);
- if (neigh->type != RTN_UNICAST) return -EINVAL;
+ if (neigh->type != RTN_UNICAST)
+ return -EINVAL;
rcu_read_lock();
in_dev = __in_dev_get_rcu(dev);
@@ -326,13 +323,13 @@ static int clip_constructor(struct neighbour *neigh)
neigh->ops->connected_output : neigh->ops->output;
entry->neigh = neigh;
entry->vccs = NULL;
- entry->expires = jiffies-1;
+ entry->expires = jiffies - 1;
return 0;
}
static u32 clip_hash(const void *pkey, const struct net_device *dev)
{
- return jhash_2words(*(u32 *)pkey, dev->ifindex, clip_tbl.hash_rnd);
+ return jhash_2words(*(u32 *) pkey, dev->ifindex, clip_tbl.hash_rnd);
}
static struct neigh_table clip_tbl = {
@@ -366,7 +363,6 @@ static struct neigh_table clip_tbl = {
.gc_thresh3 = 1024,
};
-
/* @@@ copy bh locking from arp.c -- need to bh-enable atm code before */
/*
@@ -376,15 +372,13 @@ static struct neigh_table clip_tbl = {
* clip_setentry.
*/
-
-static int clip_encap(struct atm_vcc *vcc,int mode)
+static int clip_encap(struct atm_vcc *vcc, int mode)
{
CLIP_VCC(vcc)->encap = mode;
return 0;
}
-
-static int clip_start_xmit(struct sk_buff *skb,struct net_device *dev)
+static int clip_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct clip_priv *clip_priv = PRIV(dev);
struct atmarp_entry *entry;
@@ -392,7 +386,7 @@ static int clip_start_xmit(struct sk_buff *skb,struct net_device *dev)
int old;
unsigned long flags;
- DPRINTK("clip_start_xmit (skb %p)\n",skb);
+ DPRINTK("clip_start_xmit (skb %p)\n", skb);
if (!skb->dst) {
printk(KERN_ERR "clip_start_xmit: skb->dst == NULL\n");
dev_kfree_skb(skb);
@@ -401,9 +395,9 @@ static int clip_start_xmit(struct sk_buff *skb,struct net_device *dev)
}
if (!skb->dst->neighbour) {
#if 0
- skb->dst->neighbour = clip_find_neighbour(skb->dst,1);
+ skb->dst->neighbour = clip_find_neighbour(skb->dst, 1);
if (!skb->dst->neighbour) {
- dev_kfree_skb(skb); /* lost that one */
+ dev_kfree_skb(skb); /* lost that one */
clip_priv->stats.tx_dropped++;
return 0;
}
@@ -417,73 +411,73 @@ static int clip_start_xmit(struct sk_buff *skb,struct net_device *dev)
if (!entry->vccs) {
if (time_after(jiffies, entry->expires)) {
/* should be resolved */
- entry->expires = jiffies+ATMARP_RETRY_DELAY*HZ;
- to_atmarpd(act_need,PRIV(dev)->number,entry->ip);
+ entry->expires = jiffies + ATMARP_RETRY_DELAY * HZ;
+ to_atmarpd(act_need, PRIV(dev)->number, entry->ip);
}
if (entry->neigh->arp_queue.qlen < ATMARP_MAX_UNRES_PACKETS)
- skb_queue_tail(&entry->neigh->arp_queue,skb);
+ skb_queue_tail(&entry->neigh->arp_queue, skb);
else {
dev_kfree_skb(skb);
clip_priv->stats.tx_dropped++;
}
return 0;
}
- DPRINTK("neigh %p, vccs %p\n",entry,entry->vccs);
+ DPRINTK("neigh %p, vccs %p\n", entry, entry->vccs);
ATM_SKB(skb)->vcc = vcc = entry->vccs->vcc;
- DPRINTK("using neighbour %p, vcc %p\n",skb->dst->neighbour,vcc);
+ DPRINTK("using neighbour %p, vcc %p\n", skb->dst->neighbour, vcc);
if (entry->vccs->encap) {
void *here;
- here = skb_push(skb,RFC1483LLC_LEN);
- memcpy(here,llc_oui,sizeof(llc_oui));
+ here = skb_push(skb, RFC1483LLC_LEN);
+ memcpy(here, llc_oui, sizeof(llc_oui));
((u16 *) here)[3] = skb->protocol;
}
atomic_add(skb->truesize, &sk_atm(vcc)->sk_wmem_alloc);
ATM_SKB(skb)->atm_options = vcc->atm_options;
entry->vccs->last_use = jiffies;
- DPRINTK("atm_skb(%p)->vcc(%p)->dev(%p)\n",skb,vcc,vcc->dev);
- old = xchg(&entry->vccs->xoff,1); /* assume XOFF ... */
+ DPRINTK("atm_skb(%p)->vcc(%p)->dev(%p)\n", skb, vcc, vcc->dev);
+ old = xchg(&entry->vccs->xoff, 1); /* assume XOFF ... */
if (old) {
printk(KERN_WARNING "clip_start_xmit: XOFF->XOFF transition\n");
return 0;
}
clip_priv->stats.tx_packets++;
clip_priv->stats.tx_bytes += skb->len;
- (void) vcc->send(vcc,skb);
- if (atm_may_send(vcc,0)) {
+ vcc->send(vcc, skb);
+ if (atm_may_send(vcc, 0)) {
entry->vccs->xoff = 0;
return 0;
}
- spin_lock_irqsave(&clip_priv->xoff_lock,flags);
- netif_stop_queue(dev); /* XOFF -> throttle immediately */
+ spin_lock_irqsave(&clip_priv->xoff_lock, flags);
+ netif_stop_queue(dev); /* XOFF -> throttle immediately */
barrier();
if (!entry->vccs->xoff)
netif_start_queue(dev);
- /* Oh, we just raced with clip_pop. netif_start_queue should be
- good enough, because nothing should really be asleep because
- of the brief netif_stop_queue. If this isn't true or if it
- changes, use netif_wake_queue instead. */
- spin_unlock_irqrestore(&clip_priv->xoff_lock,flags);
+ /* Oh, we just raced with clip_pop. netif_start_queue should be
+ good enough, because nothing should really be asleep because
+ of the brief netif_stop_queue. If this isn't true or if it
+ changes, use netif_wake_queue instead. */
+ spin_unlock_irqrestore(&clip_priv->xoff_lock, flags);
return 0;
}
-
static struct net_device_stats *clip_get_stats(struct net_device *dev)
{
return &PRIV(dev)->stats;
}
-
-static int clip_mkip(struct atm_vcc *vcc,int timeout)
+static int clip_mkip(struct atm_vcc *vcc, int timeout)
{
struct clip_vcc *clip_vcc;
struct sk_buff_head copy;
struct sk_buff *skb;
- if (!vcc->push) return -EBADFD;
- clip_vcc = kmalloc(sizeof(struct clip_vcc),GFP_KERNEL);
- if (!clip_vcc) return -ENOMEM;
- DPRINTK("mkip clip_vcc %p vcc %p\n",clip_vcc,vcc);
+ if (!vcc->push)
+ return -EBADFD;
+ clip_vcc = kmalloc(sizeof(struct clip_vcc), GFP_KERNEL);
+ if (!clip_vcc)
+ return -ENOMEM;
+ DPRINTK("mkip clip_vcc %p vcc %p\n", clip_vcc, vcc);
clip_vcc->vcc = vcc;
vcc->user_back = clip_vcc;
set_bit(ATM_VF_IS_CLIP, &vcc->flags);
@@ -491,7 +485,7 @@ static int clip_mkip(struct atm_vcc *vcc,int timeout)
clip_vcc->xoff = 0;
clip_vcc->encap = 1;
clip_vcc->last_use = jiffies;
- clip_vcc->idle_timeout = timeout*HZ;
+ clip_vcc->idle_timeout = timeout * HZ;
clip_vcc->old_push = vcc->push;
clip_vcc->old_pop = vcc->pop;
vcc->push = clip_push;
@@ -501,27 +495,25 @@ static int clip_mkip(struct atm_vcc *vcc,int timeout)
/* re-process everything received between connection setup and MKIP */
while ((skb = skb_dequeue(&copy)) != NULL)
if (!clip_devs) {
- atm_return(vcc,skb->truesize);
+ atm_return(vcc, skb->truesize);
kfree_skb(skb);
- }
- else {
+ } else {
unsigned int len = skb->len;
- clip_push(vcc,skb);
+ clip_push(vcc, skb);
PRIV(skb->dev)->stats.rx_packets--;
PRIV(skb->dev)->stats.rx_bytes -= len;
}
return 0;
}
-
-static int clip_setentry(struct atm_vcc *vcc,u32 ip)
+static int clip_setentry(struct atm_vcc *vcc, u32 ip)
{
struct neighbour *neigh;
struct atmarp_entry *entry;
int error;
struct clip_vcc *clip_vcc;
- struct flowi fl = { .nl_u = { .ip4_u = { .daddr = ip, .tos = 1 } } };
+ struct flowi fl = { .nl_u = { .ip4_u = { .daddr = ip, .tos = 1}} };
struct rtable *rt;
if (vcc->push != clip_push) {
@@ -538,28 +530,29 @@ static int clip_setentry(struct atm_vcc *vcc,u32 ip)
unlink_clip_vcc(clip_vcc);
return 0;
}
- error = ip_route_output_key(&rt,&fl);
- if (error) return error;
- neigh = __neigh_lookup(&clip_tbl,&ip,rt->u.dst.dev,1);
+ error = ip_route_output_key(&rt, &fl);
+ if (error)
+ return error;
+ neigh = __neigh_lookup(&clip_tbl, &ip, rt->u.dst.dev, 1);
ip_rt_put(rt);
if (!neigh)
return -ENOMEM;
entry = NEIGH2ENTRY(neigh);
if (entry != clip_vcc->entry) {
- if (!clip_vcc->entry) DPRINTK("setentry: add\n");
+ if (!clip_vcc->entry)
+ DPRINTK("setentry: add\n");
else {
DPRINTK("setentry: update\n");
unlink_clip_vcc(clip_vcc);
}
- link_vcc(clip_vcc,entry);
+ link_vcc(clip_vcc, entry);
}
- error = neigh_update(neigh, llc_oui, NUD_PERMANENT,
- NEIGH_UPDATE_F_OVERRIDE|NEIGH_UPDATE_F_ADMIN);
+ error = neigh_update(neigh, llc_oui, NUD_PERMANENT,
+ NEIGH_UPDATE_F_OVERRIDE | NEIGH_UPDATE_F_ADMIN);
neigh_release(neigh);
return error;
}
-
static void clip_setup(struct net_device *dev)
{
dev->hard_start_xmit = clip_start_xmit;
@@ -568,15 +561,14 @@ static void clip_setup(struct net_device *dev)
dev->type = ARPHRD_ATM;
dev->hard_header_len = RFC1483LLC_LEN;
dev->mtu = RFC1626_MTU;
- dev->tx_queue_len = 100; /* "normal" queue (packets) */
- /* When using a "real" qdisc, the qdisc determines the queue */
- /* length. tx_queue_len is only used for the default case, */
- /* without any more elaborate queuing. 100 is a reasonable */
- /* compromise between decent burst-tolerance and protection */
- /* against memory hogs. */
+ dev->tx_queue_len = 100; /* "normal" queue (packets) */
+ /* When using a "real" qdisc, the qdisc determines the queue */
+ /* length. tx_queue_len is only used for the default case, */
+ /* without any more elaborate queuing. 100 is a reasonable */
+ /* compromise between decent burst-tolerance and protection */
+ /* against memory hogs. */
}
-
static int clip_create(int number)
{
struct net_device *dev;
@@ -585,19 +577,19 @@ static int clip_create(int number)
if (number != -1) {
for (dev = clip_devs; dev; dev = PRIV(dev)->next)
- if (PRIV(dev)->number == number) return -EEXIST;
- }
- else {
+ if (PRIV(dev)->number == number)
+ return -EEXIST;
+ } else {
number = 0;
for (dev = clip_devs; dev; dev = PRIV(dev)->next)
if (PRIV(dev)->number >= number)
- number = PRIV(dev)->number+1;
+ number = PRIV(dev)->number + 1;
}
dev = alloc_netdev(sizeof(struct clip_priv), "", clip_setup);
if (!dev)
return -ENOMEM;
clip_priv = PRIV(dev);
- sprintf(dev->name,"atm%d",number);
+ sprintf(dev->name, "atm%d", number);
spin_lock_init(&clip_priv->xoff_lock);
clip_priv->number = number;
error = register_netdev(dev);
@@ -607,53 +599,48 @@ static int clip_create(int number)
}
clip_priv->next = clip_devs;
clip_devs = dev;
- DPRINTK("registered (net:%s)\n",dev->name);
+ DPRINTK("registered (net:%s)\n", dev->name);
return number;
}
-
-static int clip_device_event(struct notifier_block *this,unsigned long event,
- void *dev)
+static int clip_device_event(struct notifier_block *this, unsigned long event,
+ void *arg)
{
+ struct net_device *dev = arg;
+
+ if (event == NETDEV_UNREGISTER) {
+ neigh_ifdown(&clip_tbl, dev);
+ return NOTIFY_DONE;
+ }
+
/* ignore non-CLIP devices */
- if (((struct net_device *) dev)->type != ARPHRD_ATM ||
- ((struct net_device *) dev)->hard_start_xmit != clip_start_xmit)
+ if (dev->type != ARPHRD_ATM || dev->hard_start_xmit != clip_start_xmit)
return NOTIFY_DONE;
+
switch (event) {
- case NETDEV_UP:
- DPRINTK("clip_device_event NETDEV_UP\n");
- (void) to_atmarpd(act_up,PRIV(dev)->number,0);
- break;
- case NETDEV_GOING_DOWN:
- DPRINTK("clip_device_event NETDEV_DOWN\n");
- (void) to_atmarpd(act_down,PRIV(dev)->number,0);
- break;
- case NETDEV_CHANGE:
- case NETDEV_CHANGEMTU:
- DPRINTK("clip_device_event NETDEV_CHANGE*\n");
- (void) to_atmarpd(act_change,PRIV(dev)->number,0);
- break;
- case NETDEV_REBOOT:
- case NETDEV_REGISTER:
- case NETDEV_DOWN:
- DPRINTK("clip_device_event %ld\n",event);
- /* ignore */
- break;
- default:
- printk(KERN_WARNING "clip_device_event: unknown event "
- "%ld\n",event);
- break;
+ case NETDEV_UP:
+ DPRINTK("clip_device_event NETDEV_UP\n");
+ to_atmarpd(act_up, PRIV(dev)->number, 0);
+ break;
+ case NETDEV_GOING_DOWN:
+ DPRINTK("clip_device_event NETDEV_DOWN\n");
+ to_atmarpd(act_down, PRIV(dev)->number, 0);
+ break;
+ case NETDEV_CHANGE:
+ case NETDEV_CHANGEMTU:
+ DPRINTK("clip_device_event NETDEV_CHANGE*\n");
+ to_atmarpd(act_change, PRIV(dev)->number, 0);
+ break;
}
return NOTIFY_DONE;
}
-
-static int clip_inet_event(struct notifier_block *this,unsigned long event,
- void *ifa)
+static int clip_inet_event(struct notifier_block *this, unsigned long event,
+ void *ifa)
{
struct in_device *in_dev;
- in_dev = ((struct in_ifaddr *) ifa)->ifa_dev;
+ in_dev = ((struct in_ifaddr *)ifa)->ifa_dev;
if (!in_dev || !in_dev->dev) {
printk(KERN_WARNING "clip_inet_event: no device\n");
return NOTIFY_DONE;
@@ -662,23 +649,20 @@ static int clip_inet_event(struct notifier_block *this,unsigned long event,
* Transitions are of the down-change-up type, so it's sufficient to
* handle the change on up.
*/
- if (event != NETDEV_UP) return NOTIFY_DONE;
- return clip_device_event(this,NETDEV_CHANGE,in_dev->dev);
+ if (event != NETDEV_UP)
+ return NOTIFY_DONE;
+ return clip_device_event(this, NETDEV_CHANGE, in_dev->dev);
}
static struct notifier_block clip_dev_notifier = {
- clip_device_event,
- NULL,
- 0
+ .notifier_call = clip_device_event,
};
static struct notifier_block clip_inet_notifier = {
- clip_inet_event,
- NULL,
- 0
+ .notifier_call = clip_inet_event,
};
@@ -686,14 +670,12 @@ static struct notifier_block clip_inet_notifier = {
static void atmarpd_close(struct atm_vcc *vcc)
{
DPRINTK("atmarpd_close\n");
- atmarpd = NULL; /* assumed to be atomic */
- barrier();
- unregister_inetaddr_notifier(&clip_inet_notifier);
- unregister_netdevice_notifier(&clip_dev_notifier);
- if (skb_peek(&sk_atm(vcc)->sk_receive_queue))
- printk(KERN_ERR "atmarpd_close: closing with requests "
- "pending\n");
+
+ rtnl_lock();
+ atmarpd = NULL;
skb_queue_purge(&sk_atm(vcc)->sk_receive_queue);
+ rtnl_unlock();
+
DPRINTK("(done)\n");
module_put(THIS_MODULE);
}
@@ -714,14 +696,14 @@ static struct atm_dev atmarpd_dev = {
static int atm_init_atmarp(struct atm_vcc *vcc)
{
- if (atmarpd) return -EADDRINUSE;
- if (start_timer) {
- start_timer = 0;
- init_timer(&idle_timer);
- idle_timer.expires = jiffies+CLIP_CHECK_INTERVAL*HZ;
- idle_timer.function = idle_timer_check;
- add_timer(&idle_timer);
+ rtnl_lock();
+ if (atmarpd) {
+ rtnl_unlock();
+ return -EADDRINUSE;
}
+
+ mod_timer(&idle_timer, jiffies+CLIP_CHECK_INTERVAL*HZ);
+
atmarpd = vcc;
set_bit(ATM_VF_META,&vcc->flags);
set_bit(ATM_VF_READY,&vcc->flags);
@@ -731,10 +713,7 @@ static int atm_init_atmarp(struct atm_vcc *vcc)
vcc->push = NULL;
vcc->pop = NULL; /* crash */
vcc->push_oam = NULL; /* crash */
- if (register_netdevice_notifier(&clip_dev_notifier))
- printk(KERN_ERR "register_netdevice_notifier failed\n");
- if (register_inetaddr_notifier(&clip_inet_notifier))
- printk(KERN_ERR "register_inetaddr_notifier failed\n");
+ rtnl_unlock();
return 0;
}
@@ -744,53 +723,53 @@ static int clip_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
int err = 0;
switch (cmd) {
- case SIOCMKCLIP:
- case ATMARPD_CTRL:
- case ATMARP_MKIP:
- case ATMARP_SETENTRY:
- case ATMARP_ENCAP:
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
- break;
- default:
- return -ENOIOCTLCMD;
+ case SIOCMKCLIP:
+ case ATMARPD_CTRL:
+ case ATMARP_MKIP:
+ case ATMARP_SETENTRY:
+ case ATMARP_ENCAP:
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ break;
+ default:
+ return -ENOIOCTLCMD;
}
switch (cmd) {
- case SIOCMKCLIP:
- err = clip_create(arg);
- break;
- case ATMARPD_CTRL:
- err = atm_init_atmarp(vcc);
- if (!err) {
- sock->state = SS_CONNECTED;
- __module_get(THIS_MODULE);
- }
- break;
- case ATMARP_MKIP:
- err = clip_mkip(vcc ,arg);
- break;
- case ATMARP_SETENTRY:
- err = clip_setentry(vcc, arg);
- break;
- case ATMARP_ENCAP:
- err = clip_encap(vcc, arg);
- break;
+ case SIOCMKCLIP:
+ err = clip_create(arg);
+ break;
+ case ATMARPD_CTRL:
+ err = atm_init_atmarp(vcc);
+ if (!err) {
+ sock->state = SS_CONNECTED;
+ __module_get(THIS_MODULE);
+ }
+ break;
+ case ATMARP_MKIP:
+ err = clip_mkip(vcc, arg);
+ break;
+ case ATMARP_SETENTRY:
+ err = clip_setentry(vcc, arg);
+ break;
+ case ATMARP_ENCAP:
+ err = clip_encap(vcc, arg);
+ break;
}
return err;
}
static struct atm_ioctl clip_ioctl_ops = {
- .owner = THIS_MODULE,
- .ioctl = clip_ioctl,
+ .owner = THIS_MODULE,
+ .ioctl = clip_ioctl,
};
#ifdef CONFIG_PROC_FS
static void svc_addr(struct seq_file *seq, struct sockaddr_atmsvc *addr)
{
- static int code[] = { 1,2,10,6,1,0 };
- static int e164[] = { 1,8,4,6,1,0 };
+ static int code[] = { 1, 2, 10, 6, 1, 0 };
+ static int e164[] = { 1, 8, 4, 6, 1, 0 };
if (*addr->sas_addr.pub) {
seq_printf(seq, "%s", addr->sas_addr.pub);
@@ -809,7 +788,7 @@ static void svc_addr(struct seq_file *seq, struct sockaddr_atmsvc *addr)
for (i = 0; fields[i]; i++) {
for (j = fields[i]; j; j--)
seq_printf(seq, "%02X", *prv++);
- if (fields[i+1])
+ if (fields[i + 1])
seq_putc(seq, '.');
}
}
@@ -828,8 +807,7 @@ static void atmarp_info(struct seq_file *seq, struct net_device *dev,
svc = ((clip_vcc == SEQ_NO_VCC_TOKEN) ||
(sk_atm(clip_vcc->vcc)->sk_family == AF_ATMSVC));
- llc = ((clip_vcc == SEQ_NO_VCC_TOKEN) ||
- clip_vcc->encap);
+ llc = ((clip_vcc == SEQ_NO_VCC_TOKEN) || clip_vcc->encap);
if (clip_vcc == SEQ_NO_VCC_TOKEN)
exp = entry->neigh->used;
@@ -839,10 +817,7 @@ static void atmarp_info(struct seq_file *seq, struct net_device *dev,
exp = (jiffies - exp) / HZ;
seq_printf(seq, "%-6s%-4s%-4s%5ld ",
- dev->name,
- svc ? "SVC" : "PVC",
- llc ? "LLC" : "NULL",
- exp);
+ dev->name, svc ? "SVC" : "PVC", llc ? "LLC" : "NULL", exp);
off = scnprintf(buf, sizeof(buf) - 1, "%d.%d.%d.%d",
NIPQUAD(entry->ip));
@@ -860,8 +835,7 @@ static void atmarp_info(struct seq_file *seq, struct net_device *dev,
} else if (!svc) {
seq_printf(seq, "%d.%d.%d\n",
clip_vcc->vcc->dev->number,
- clip_vcc->vcc->vpi,
- clip_vcc->vcc->vci);
+ clip_vcc->vcc->vpi, clip_vcc->vcc->vci);
} else {
svc_addr(seq, &clip_vcc->vcc->remote);
seq_putc(seq, '\n');
@@ -894,7 +868,7 @@ static struct clip_vcc *clip_seq_next_vcc(struct atmarp_entry *e,
}
static void *clip_seq_vcc_walk(struct clip_seq_state *state,
- struct atmarp_entry *e, loff_t *pos)
+ struct atmarp_entry *e, loff_t * pos)
{
struct clip_vcc *vcc = state->vcc;
@@ -911,24 +885,24 @@ static void *clip_seq_vcc_walk(struct clip_seq_state *state,
return vcc;
}
-
+
static void *clip_seq_sub_iter(struct neigh_seq_state *_state,
- struct neighbour *n, loff_t *pos)
+ struct neighbour *n, loff_t * pos)
{
- struct clip_seq_state *state = (struct clip_seq_state *) _state;
+ struct clip_seq_state *state = (struct clip_seq_state *)_state;
return clip_seq_vcc_walk(state, NEIGH2ENTRY(n), pos);
}
-static void *clip_seq_start(struct seq_file *seq, loff_t *pos)
+static void *clip_seq_start(struct seq_file *seq, loff_t * pos)
{
return neigh_seq_start(seq, pos, &clip_tbl, NEIGH_SEQ_NEIGH_ONLY);
}
static int clip_seq_show(struct seq_file *seq, void *v)
{
- static char atm_arp_banner[] =
- "IPitf TypeEncp Idle IP address ATM address\n";
+ static char atm_arp_banner[] =
+ "IPitf TypeEncp Idle IP address ATM address\n";
if (v == SEQ_START_TOKEN) {
seq_puts(seq, atm_arp_banner);
@@ -939,7 +913,7 @@ static int clip_seq_show(struct seq_file *seq, void *v)
atmarp_info(seq, n->dev, NEIGH2ENTRY(n), vcc);
}
- return 0;
+ return 0;
}
static struct seq_operations arp_seq_ops = {
@@ -988,20 +962,19 @@ static struct file_operations arp_seq_fops = {
static int __init atm_clip_init(void)
{
+ struct proc_dir_entry *p;
neigh_table_init(&clip_tbl);
clip_tbl_hook = &clip_tbl;
register_atm_ioctl(&clip_ioctl_ops);
+ register_netdevice_notifier(&clip_dev_notifier);
+ register_inetaddr_notifier(&clip_inet_notifier);
-#ifdef CONFIG_PROC_FS
-{
- struct proc_dir_entry *p;
+ setup_timer(&idle_timer, idle_timer_check, 0);
p = create_proc_entry("arp", S_IRUGO, atm_proc_root);
if (p)
p->proc_fops = &arp_seq_fops;
-}
-#endif
return 0;
}
@@ -1012,13 +985,15 @@ static void __exit atm_clip_exit(void)
remove_proc_entry("arp", atm_proc_root);
+ unregister_inetaddr_notifier(&clip_inet_notifier);
+ unregister_netdevice_notifier(&clip_dev_notifier);
+
deregister_atm_ioctl(&clip_ioctl_ops);
/* First, stop the idle timer, so it stops banging
* on the table.
*/
- if (start_timer == 0)
- del_timer(&idle_timer);
+ del_timer_sync(&idle_timer);
/* Next, purge the table, so that the device
* unregister loop below does not hang due to
@@ -1042,5 +1017,6 @@ static void __exit atm_clip_exit(void)
module_init(atm_clip_init);
module_exit(atm_clip_exit);
-
+MODULE_AUTHOR("Werner Almesberger");
+MODULE_DESCRIPTION("Classical/IP over ATM interface");
MODULE_LICENSE("GPL");
diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c
index 041dadde31a..4749d504c62 100644
--- a/net/ipv4/arp.c
+++ b/net/ipv4/arp.c
@@ -928,7 +928,8 @@ static void parp_redo(struct sk_buff *skb)
* Receive an arp request from the device layer.
*/
-int arp_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev)
+static int arp_rcv(struct sk_buff *skb, struct net_device *dev,
+ struct packet_type *pt, struct net_device *orig_dev)
{
struct arphdr *arp;
@@ -1417,7 +1418,6 @@ static int __init arp_proc_init(void)
EXPORT_SYMBOL(arp_broken_ops);
EXPORT_SYMBOL(arp_find);
-EXPORT_SYMBOL(arp_rcv);
EXPORT_SYMBOL(arp_create);
EXPORT_SYMBOL(arp_xmit);
EXPORT_SYMBOL(arp_send);
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index 81c2f788529..54419b27686 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -1556,7 +1556,6 @@ void __init devinet_init(void)
#endif
}
-EXPORT_SYMBOL(devinet_ioctl);
EXPORT_SYMBOL(in_dev_finish_destroy);
EXPORT_SYMBOL(inet_select_addr);
EXPORT_SYMBOL(inetdev_by_index);
diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c
index 4e3d3811dea..cdde9639096 100644
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -666,4 +666,3 @@ void __init ip_fib_init(void)
}
EXPORT_SYMBOL(inet_addr_type);
-EXPORT_SYMBOL(ip_rt_ioctl);
diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c
index ef7366fc132..ee9b5515b9a 100644
--- a/net/ipv4/inet_hashtables.c
+++ b/net/ipv4/inet_hashtables.c
@@ -43,8 +43,6 @@ struct inet_bind_bucket *inet_bind_bucket_create(kmem_cache_t *cachep,
return tb;
}
-EXPORT_SYMBOL(inet_bind_bucket_create);
-
/*
* Caller must hold hashbucket lock for this tb with local BH disabled
*/
@@ -64,8 +62,6 @@ void inet_bind_hash(struct sock *sk, struct inet_bind_bucket *tb,
inet_csk(sk)->icsk_bind_hash = tb;
}
-EXPORT_SYMBOL(inet_bind_hash);
-
/*
* Get rid of any references to a local port held by the given sock.
*/
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index 8dcba3887f0..cff9c3a72da 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -904,7 +904,7 @@ alloc_new_skb:
* because we have no idea what fragment will be
* the last.
*/
- if (datalen == length)
+ if (datalen == length + fraggap)
alloclen += rt->u.dst.trailer_len;
if (transhdrlen) {
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 195d8358455..9f0cca4c4fa 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -4559,7 +4559,6 @@ discard:
EXPORT_SYMBOL(sysctl_tcp_ecn);
EXPORT_SYMBOL(sysctl_tcp_reordering);
-EXPORT_SYMBOL(sysctl_tcp_abc);
EXPORT_SYMBOL(tcp_parse_options);
EXPORT_SYMBOL(tcp_rcv_established);
EXPORT_SYMBOL(tcp_rcv_state_process);
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 9e85c041610..672950e54c4 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -1859,5 +1859,4 @@ EXPORT_SYMBOL(tcp_proc_unregister);
#endif
EXPORT_SYMBOL(sysctl_local_port_range);
EXPORT_SYMBOL(sysctl_tcp_low_latency);
-EXPORT_SYMBOL(sysctl_tcp_tw_reuse);
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 9d79546d384..b871db6adc5 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -59,9 +59,6 @@ int sysctl_tcp_tso_win_divisor = 3;
int sysctl_tcp_mtu_probing = 0;
int sysctl_tcp_base_mss = 512;
-EXPORT_SYMBOL(sysctl_tcp_mtu_probing);
-EXPORT_SYMBOL(sysctl_tcp_base_mss);
-
static void update_send_head(struct sock *sk, struct tcp_sock *tp,
struct sk_buff *skb)
{
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index a8e14dc1b04..3dc3e1f3b7a 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -805,16 +805,22 @@ void xfrm_replay_notify(struct xfrm_state *x, int event)
case XFRM_REPLAY_UPDATE:
if (x->replay_maxdiff &&
(x->replay.seq - x->preplay.seq < x->replay_maxdiff) &&
- (x->replay.oseq - x->preplay.oseq < x->replay_maxdiff))
- return;
+ (x->replay.oseq - x->preplay.oseq < x->replay_maxdiff)) {
+ if (x->xflags & XFRM_TIME_DEFER)
+ event = XFRM_REPLAY_TIMEOUT;
+ else
+ return;
+ }
break;
case XFRM_REPLAY_TIMEOUT:
if ((x->replay.seq == x->preplay.seq) &&
(x->replay.bitmap == x->preplay.bitmap) &&
- (x->replay.oseq == x->preplay.oseq))
+ (x->replay.oseq == x->preplay.oseq)) {
+ x->xflags |= XFRM_TIME_DEFER;
return;
+ }
break;
}
@@ -825,8 +831,10 @@ void xfrm_replay_notify(struct xfrm_state *x, int event)
km_state_notify(x, &c);
if (x->replay_maxage &&
- !mod_timer(&x->rtimer, jiffies + x->replay_maxage))
+ !mod_timer(&x->rtimer, jiffies + x->replay_maxage)) {
xfrm_state_hold(x);
+ x->xflags &= ~XFRM_TIME_DEFER;
+ }
}
EXPORT_SYMBOL(xfrm_replay_notify);
@@ -836,10 +844,15 @@ static void xfrm_replay_timer_handler(unsigned long data)
spin_lock(&x->lock);
- if (xfrm_aevent_is_on() && x->km.state == XFRM_STATE_VALID)
- xfrm_replay_notify(x, XFRM_REPLAY_TIMEOUT);
+ if (x->km.state == XFRM_STATE_VALID) {
+ if (xfrm_aevent_is_on())
+ xfrm_replay_notify(x, XFRM_REPLAY_TIMEOUT);
+ else
+ x->xflags |= XFRM_TIME_DEFER;
+ }
spin_unlock(&x->lock);
+ xfrm_state_put(x);
}
int xfrm_replay_check(struct xfrm_state *x, u32 seq)
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-05 09:34:43 +0000