summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/mpic.txt42
-rw-r--r--arch/powerpc/boot/dts/mpc8315erdb.dts27
-rw-r--r--arch/powerpc/boot/dts/mpc8349emitx.dts82
-rw-r--r--arch/powerpc/include/asm/gpio.h5
-rw-r--r--arch/powerpc/platforms/83xx/suspend.c52
-rw-r--r--arch/powerpc/sysdev/cpm2_pic.c28
-rw-r--r--arch/powerpc/sysdev/fsl_pci.c8
-rw-r--r--arch/powerpc/sysdev/mpc8xxx_gpio.c21
8 files changed, 248 insertions, 17 deletions
diff --git a/Documentation/powerpc/dts-bindings/fsl/mpic.txt b/Documentation/powerpc/dts-bindings/fsl/mpic.txt
new file mode 100644
index 00000000000..71e39cf3215
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/fsl/mpic.txt
@@ -0,0 +1,42 @@
+* OpenPIC and its interrupt numbers on Freescale's e500/e600 cores
+
+The OpenPIC specification does not specify which interrupt source has to
+become which interrupt number. This is up to the software implementation
+of the interrupt controller. The only requirement is that every
+interrupt source has to have an unique interrupt number / vector number.
+To accomplish this the current implementation assigns the number zero to
+the first source, the number one to the second source and so on until
+all interrupt sources have their unique number.
+Usually the assigned vector number equals the interrupt number mentioned
+in the documentation for a given core / CPU. This is however not true
+for the e500 cores (MPC85XX CPUs) where the documentation distinguishes
+between internal and external interrupt sources and starts counting at
+zero for both of them.
+
+So what to write for external interrupt source X or internal interrupt
+source Y into the device tree? Here is an example:
+
+The memory map for the interrupt controller in the MPC8544[0] shows,
+that the first interrupt source starts at 0x5_0000 (PIC Register Address
+Map-Interrupt Source Configuration Registers). This source becomes the
+number zero therefore:
+ External interrupt 0 = interrupt number 0
+ External interrupt 1 = interrupt number 1
+ External interrupt 2 = interrupt number 2
+ ...
+Every interrupt number allocates 0x20 bytes register space. So to get
+its number it is sufficient to shift the lower 16bits to right by five.
+So for the external interrupt 10 we have:
+ 0x0140 >> 5 = 10
+
+After the external sources, the internal sources follow. The in core I2C
+controller on the MPC8544 for instance has the internal source number
+27. Oo obtain its interrupt number we take the lower 16bits of its memory
+address (0x5_0560) and shift it right:
+ 0x0560 >> 5 = 43
+
+Therefore the I2C device node for the MPC8544 CPU has to have the
+interrupt number 43 specified in the device tree.
+
+[0] MPC8544E PowerQUICCTM III, Integrated Host Processor Family Reference Manual
+ MPC8544ERM Rev. 1 10/2007
diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts
index 32e10f588c1..8a3a4f3ef83 100644
--- a/arch/powerpc/boot/dts/mpc8315erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8315erdb.dts
@@ -204,6 +204,7 @@
interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = < &phy0 >;
+ fsl,magic-packet;
mdio@520 {
#address-cells = <1>;
@@ -246,6 +247,7 @@
interrupt-parent = <&ipic>;
tbi-handle = <&tbi1>;
phy-handle = < &phy1 >;
+ fsl,magic-packet;
mdio@520 {
#address-cells = <1>;
@@ -309,6 +311,22 @@
interrupt-parent = <&ipic>;
};
+ gtm1: timer@500 {
+ compatible = "fsl,mpc8315-gtm", "fsl,gtm";
+ reg = <0x500 0x100>;
+ interrupts = <90 8 78 8 84 8 72 8>;
+ interrupt-parent = <&ipic>;
+ clock-frequency = <133333333>;
+ };
+
+ timer@600 {
+ compatible = "fsl,mpc8315-gtm", "fsl,gtm";
+ reg = <0x600 0x100>;
+ interrupts = <91 8 79 8 85 8 73 8>;
+ interrupt-parent = <&ipic>;
+ clock-frequency = <133333333>;
+ };
+
/* IPIC
* interrupts cell = <intr #, sense>
* sense values match linux IORESOURCE_IRQ_* defines:
@@ -337,6 +355,15 @@
0x59 0x8>;
interrupt-parent = < &ipic >;
};
+
+ pmc: power@b00 {
+ compatible = "fsl,mpc8315-pmc", "fsl,mpc8313-pmc",
+ "fsl,mpc8349-pmc";
+ reg = <0xb00 0x100 0xa00 0x100>;
+ interrupts = <80 8>;
+ interrupt-parent = <&ipic>;
+ fsl,mpc8313-wakeup-timer = <&gtm1>;
+ };
};
pci0: pci@e0008500 {
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index feeeb7f9d60..b53d1df11e2 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -63,6 +63,24 @@
reg = <0x200 0x100>;
};
+ gpio1: gpio-controller@c00 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8349-gpio";
+ reg = <0xc00 0x100>;
+ interrupts = <74 0x8>;
+ interrupt-parent = <&ipic>;
+ gpio-controller;
+ };
+
+ gpio2: gpio-controller@d00 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8349-gpio";
+ reg = <0xd00 0x100>;
+ interrupts = <75 0x8>;
+ interrupt-parent = <&ipic>;
+ gpio-controller;
+ };
+
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -72,6 +90,12 @@
interrupts = <14 0x8>;
interrupt-parent = <&ipic>;
dfsrr;
+
+ eeprom: at24@50 {
+ compatible = "st-micro,24c256";
+ reg = <0x50>;
+ };
+
};
i2c@3100 {
@@ -91,6 +115,25 @@
interrupt-parent = <&ipic>;
};
+ pcf1: iexp@38 {
+ #gpio-cells = <2>;
+ compatible = "ti,pcf8574a";
+ reg = <0x38>;
+ gpio-controller;
+ };
+
+ pcf2: iexp@39 {
+ #gpio-cells = <2>;
+ compatible = "ti,pcf8574a";
+ reg = <0x39>;
+ gpio-controller;
+ };
+
+ spd: at24@51 {
+ compatible = "at24,spd";
+ reg = <0x51>;
+ };
+
mcu_pio: mcu@a {
#gpio-cells = <2>;
compatible = "fsl,mc9s08qg8-mpc8349emitx",
@@ -275,6 +318,24 @@
reg = <0x700 0x100>;
device_type = "ipic";
};
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ green {
+ label = "Green";
+ gpios = <&pcf1 0 1>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ yellow {
+ label = "Yellow";
+ gpios = <&pcf1 1 1>;
+ /* linux,default-trigger = "heartbeat"; */
+ default-state = "on";
+ };
+ };
+
};
pci0: pci@e0008500 {
@@ -331,7 +392,26 @@
compatible = "fsl,mpc8349e-localbus",
"fsl,pq2pro-localbus";
reg = <0xe0005000 0xd8>;
- ranges = <0x3 0x0 0xf0000000 0x210>;
+ ranges = <0x0 0x0 0xfe000000 0x1000000 /* flash */
+ 0x1 0x0 0xf8000000 0x20000 /* VSC 7385 */
+ 0x2 0x0 0xf9000000 0x200000 /* exp slot */
+ 0x3 0x0 0xf0000000 0x210>; /* CF slot */
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x800000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ flash@0,800000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x800000 0x800000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
pata@3,0 {
compatible = "fsl,mpc8349emitx-pata", "ata-generic";
diff --git a/arch/powerpc/include/asm/gpio.h b/arch/powerpc/include/asm/gpio.h
index ea04632399d..38762edb5e5 100644
--- a/arch/powerpc/include/asm/gpio.h
+++ b/arch/powerpc/include/asm/gpio.h
@@ -38,12 +38,9 @@ static inline int gpio_cansleep(unsigned int gpio)
return __gpio_cansleep(gpio);
}
-/*
- * Not implemented, yet.
- */
static inline int gpio_to_irq(unsigned int gpio)
{
- return -ENOSYS;
+ return __gpio_to_irq(gpio);
}
static inline int irq_to_gpio(unsigned int irq)
diff --git a/arch/powerpc/platforms/83xx/suspend.c b/arch/powerpc/platforms/83xx/suspend.c
index d306f07b9aa..43805348b81 100644
--- a/arch/powerpc/platforms/83xx/suspend.c
+++ b/arch/powerpc/platforms/83xx/suspend.c
@@ -32,6 +32,7 @@
#define PMCCR1_NEXT_STATE 0x0C /* Next state for power management */
#define PMCCR1_NEXT_STATE_SHIFT 2
#define PMCCR1_CURR_STATE 0x03 /* Current state for power management*/
+#define IMMR_SYSCR_OFFSET 0x100
#define IMMR_RCW_OFFSET 0x900
#define RCW_PCI_HOST 0x80000000
@@ -78,6 +79,22 @@ struct mpc83xx_clock {
u32 sccr;
};
+struct mpc83xx_syscr {
+ __be32 sgprl;
+ __be32 sgprh;
+ __be32 spridr;
+ __be32 :32;
+ __be32 spcr;
+ __be32 sicrl;
+ __be32 sicrh;
+};
+
+struct mpc83xx_saved {
+ u32 sicrl;
+ u32 sicrh;
+ u32 sccr;
+};
+
struct pmc_type {
int has_deep_sleep;
};
@@ -87,6 +104,8 @@ static int has_deep_sleep, deep_sleeping;
static int pmc_irq;
static struct mpc83xx_pmc __iomem *pmc_regs;
static struct mpc83xx_clock __iomem *clock_regs;
+static struct mpc83xx_syscr __iomem *syscr_regs;
+static struct mpc83xx_saved saved_regs;
static int is_pci_agent, wake_from_pci;
static phys_addr_t immrbase;
static int pci_pm_state;
@@ -137,6 +156,20 @@ static irqreturn_t pmc_irq_handler(int irq, void *dev_id)
return ret;
}
+static void mpc83xx_suspend_restore_regs(void)
+{
+ out_be32(&syscr_regs->sicrl, saved_regs.sicrl);
+ out_be32(&syscr_regs->sicrh, saved_regs.sicrh);
+ out_be32(&clock_regs->sccr, saved_regs.sccr);
+}
+
+static void mpc83xx_suspend_save_regs(void)
+{
+ saved_regs.sicrl = in_be32(&syscr_regs->sicrl);
+ saved_regs.sicrh = in_be32(&syscr_regs->sicrh);
+ saved_regs.sccr = in_be32(&clock_regs->sccr);
+}
+
static int mpc83xx_suspend_enter(suspend_state_t state)
{
int ret = -EAGAIN;
@@ -166,6 +199,8 @@ static int mpc83xx_suspend_enter(suspend_state_t state)
*/
if (deep_sleeping) {
+ mpc83xx_suspend_save_regs();
+
out_be32(&pmc_regs->mask, PMCER_ALL);
out_be32(&pmc_regs->config1,
@@ -179,6 +214,8 @@ static int mpc83xx_suspend_enter(suspend_state_t state)
in_be32(&pmc_regs->config1) & ~PMCCR1_POWER_OFF);
out_be32(&pmc_regs->mask, PMCER_PMCI);
+
+ mpc83xx_suspend_restore_regs();
} else {
out_be32(&pmc_regs->mask, PMCER_PMCI);
@@ -194,7 +231,7 @@ out:
return ret;
}
-static void mpc83xx_suspend_finish(void)
+static void mpc83xx_suspend_end(void)
{
deep_sleeping = 0;
}
@@ -278,7 +315,7 @@ static struct platform_suspend_ops mpc83xx_suspend_ops = {
.valid = mpc83xx_suspend_valid,
.begin = mpc83xx_suspend_begin,
.enter = mpc83xx_suspend_enter,
- .finish = mpc83xx_suspend_finish,
+ .end = mpc83xx_suspend_end,
};
static int pmc_probe(struct of_device *ofdev,
@@ -333,12 +370,23 @@ static int pmc_probe(struct of_device *ofdev,
goto out_pmc;
}
+ if (has_deep_sleep) {
+ syscr_regs = ioremap(immrbase + IMMR_SYSCR_OFFSET,
+ sizeof(*syscr_regs));
+ if (!syscr_regs) {
+ ret = -ENOMEM;
+ goto out_syscr;
+ }
+ }
+
if (is_pci_agent)
mpc83xx_set_agent();
suspend_set_ops(&mpc83xx_suspend_ops);
return 0;
+out_syscr:
+ iounmap(clock_regs);
out_pmc:
iounmap(pmc_regs);
out:
diff --git a/arch/powerpc/sysdev/cpm2_pic.c b/arch/powerpc/sysdev/cpm2_pic.c
index 971483f0dfa..1709ac5aac7 100644
--- a/arch/powerpc/sysdev/cpm2_pic.c
+++ b/arch/powerpc/sysdev/cpm2_pic.c
@@ -143,13 +143,23 @@ static int cpm2_set_irq_type(unsigned int virq, unsigned int flow_type)
struct irq_desc *desc = irq_to_desc(virq);
unsigned int vold, vnew, edibit;
- if (flow_type == IRQ_TYPE_NONE)
- flow_type = IRQ_TYPE_LEVEL_LOW;
-
- if (flow_type & IRQ_TYPE_EDGE_RISING) {
- printk(KERN_ERR "CPM2 PIC: sense type 0x%x not supported\n",
- flow_type);
- return -EINVAL;
+ /* Port C interrupts are either IRQ_TYPE_EDGE_FALLING or
+ * IRQ_TYPE_EDGE_BOTH (default). All others are IRQ_TYPE_EDGE_FALLING
+ * or IRQ_TYPE_LEVEL_LOW (default)
+ */
+ if (src >= CPM2_IRQ_PORTC15 && src <= CPM2_IRQ_PORTC0) {
+ if (flow_type == IRQ_TYPE_NONE)
+ flow_type = IRQ_TYPE_EDGE_BOTH;
+
+ if (flow_type != IRQ_TYPE_EDGE_BOTH &&
+ flow_type != IRQ_TYPE_EDGE_FALLING)
+ goto err_sense;
+ } else {
+ if (flow_type == IRQ_TYPE_NONE)
+ flow_type = IRQ_TYPE_LEVEL_LOW;
+
+ if (flow_type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_LEVEL_HIGH))
+ goto err_sense;
}
desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
@@ -181,6 +191,10 @@ static int cpm2_set_irq_type(unsigned int virq, unsigned int flow_type)
if (vold != vnew)
out_be32(&cpm2_intctl->ic_siexr, vnew);
return 0;
+
+err_sense:
+ pr_err("CPM2 PIC: sense type 0x%x not supported\n", flow_type);
+ return -EINVAL;
}
static struct irq_chip cpm2_pic = {
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 4e3a3e345ab..e1a028c1f18 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -464,8 +464,7 @@ static void __iomem *mpc83xx_pcie_remap_cfg(struct pci_bus *bus,
{
struct pci_controller *hose = pci_bus_to_host(bus);
struct mpc83xx_pcie_priv *pcie = hose->dn->data;
- u8 bus_no = bus->number - hose->first_busno;
- u32 dev_base = bus_no << 24 | devfn << 16;
+ u32 dev_base = bus->number << 24 | devfn << 16;
int ret;
ret = mpc83xx_pcie_exclude_device(bus, devfn);
@@ -515,12 +514,17 @@ static int mpc83xx_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
static int mpc83xx_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 val)
{
+ struct pci_controller *hose = pci_bus_to_host(bus);
void __iomem *cfg_addr;
cfg_addr = mpc83xx_pcie_remap_cfg(bus, devfn, offset);
if (!cfg_addr)
return PCIBIOS_DEVICE_NOT_FOUND;
+ /* PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS */
+ if (offset == PCI_PRIMARY_BUS && bus->number == hose->first_busno)
+ val &= 0xffffff00;
+
switch (len) {
case 1:
out_8(cfg_addr, val);
diff --git a/arch/powerpc/sysdev/mpc8xxx_gpio.c b/arch/powerpc/sysdev/mpc8xxx_gpio.c
index 103eace3619..ee1c0e1cf4a 100644
--- a/arch/powerpc/sysdev/mpc8xxx_gpio.c
+++ b/arch/powerpc/sysdev/mpc8xxx_gpio.c
@@ -54,6 +54,22 @@ static void mpc8xxx_gpio_save_regs(struct of_mm_gpio_chip *mm)
mpc8xxx_gc->data = in_be32(mm->regs + GPIO_DAT);
}
+/* Workaround GPIO 1 errata on MPC8572/MPC8536. The status of GPIOs
+ * defined as output cannot be determined by reading GPDAT register,
+ * so we use shadow data register instead. The status of input pins
+ * is determined by reading GPDAT register.
+ */
+static int mpc8572_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+ u32 val;
+ struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
+ struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
+
+ val = in_be32(mm->regs + GPIO_DAT) & ~in_be32(mm->regs + GPIO_DIR);
+
+ return (val | mpc8xxx_gc->data) & mpc8xxx_gpio2mask(gpio);
+}
+
static int mpc8xxx_gpio_get(struct gpio_chip *gc, unsigned int gpio)
{
struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
@@ -136,7 +152,10 @@ static void __init mpc8xxx_add_controller(struct device_node *np)
gc->ngpio = MPC8XXX_GPIO_PINS;
gc->direction_input = mpc8xxx_gpio_dir_in;
gc->direction_output = mpc8xxx_gpio_dir_out;
- gc->get = mpc8xxx_gpio_get;
+ if (of_device_is_compatible(np, "fsl,mpc8572-gpio"))
+ gc->get = mpc8572_gpio_get;
+ else
+ gc->get = mpc8xxx_gpio_get;
gc->set = mpc8xxx_gpio_set;
ret = of_mm_gpiochip_add(np, mm_gc);